2017-12-14T00:28:39.967Z,1513211319.967 [Supervisor](DEBUG): Initializing supervisor.
2017-12-14T00:28:39.970Z,1513211319.970 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-12-14T00:28:39.970Z,1513211319.970 [SyncHandler](INFO): Protected caller Thread ID is 803
2017-12-14T00:28:39.971Z,1513211319.971 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-12-14T00:28:39.972Z,1513211319.972 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-12-14T00:28:39.972Z,1513211319.972 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 804
2017-12-14T00:28:39.974Z,1513211319.974 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-12-14T00:28:39.985Z,1513211319.985 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-12-14T00:28:39.986Z,1513211319.986 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-12-14T00:28:39.986Z,1513211319.986 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 805
2017-12-14T00:28:39.987Z,1513211319.987 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-12-14T00:28:39.988Z,1513211319.988 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-12-14T00:28:39.988Z,1513211319.988 [logger ThreadHandler](INFO): Protected caller Thread ID is 806
2017-12-14T00:28:39.990Z,1513211319.990 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-12-14T00:28:39.990Z,1513211319.990 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-12-14T00:28:39.995Z,1513211319.995 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-12-14T00:28:40.171Z,1513211320.171 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-12-14T00:28:40.172Z,1513211320.172 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-12-14T00:28:40.305Z,1513211320.305 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-12-14T00:28:40.306Z,1513211320.306 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-12-14T00:28:40.612Z,1513211320.612 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-12-14T00:28:40.612Z,1513211320.612 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-12-14T00:28:40.742Z,1513211320.742 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-12-14T00:28:40.743Z,1513211320.743 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-12-14T00:28:40.824Z,1513211320.824 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-12-14T00:28:41.010Z,1513211321.010 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-12-14T00:28:41.011Z,1513211321.011 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-12-14T00:28:41.107Z,1513211321.107 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-12-14T00:28:41.108Z,1513211321.108 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-12-14T00:28:41.413Z,1513211321.413 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-12-14T00:28:41.415Z,1513211321.415 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-12-14T00:28:41.738Z,1513211321.738 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-12-14T00:28:41.739Z,1513211321.739 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-12-14T00:28:42.016Z,1513211322.016 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-12-14T00:28:42.016Z,1513211322.016 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-12-14T00:28:42.487Z,1513211322.487 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-12-14T00:28:42.488Z,1513211322.488 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-12-14T00:28:42.671Z,1513211322.671 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-12-14T00:28:42.672Z,1513211322.672 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-12-14T00:28:42.769Z,1513211322.769 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-12-14T00:28:42.769Z,1513211322.769 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-12-14T00:28:43.194Z,1513211323.194 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-12-14T00:28:43.195Z,1513211323.195 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-12-14T00:28:43.303Z,1513211323.303 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-12-14T00:28:43.305Z,1513211323.305 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2017-12-14T00:28:48.879Z,1513211328.879 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2017-12-14T00:28:49.258Z,1513211329.258 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-12-14T00:28:49.259Z,1513211329.259 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2017-12-14T00:28:49.980Z,1513211329.980 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2017-12-14T00:28:50.081Z,1513211330.081 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2017-12-14T00:28:50.175Z,1513211330.175 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2017-12-14T00:28:50.260Z,1513211330.260 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2017-12-14T00:28:50.405Z,1513211330.405 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2017-12-14T00:28:50.564Z,1513211330.564 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2017-12-14T00:28:50.667Z,1513211330.667 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2017-12-14T00:28:50.761Z,1513211330.761 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2017-12-14T00:28:50.846Z,1513211330.846 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2017-12-14T00:28:51.004Z,1513211331.004 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2017-12-14T00:28:51.007Z,1513211331.007 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-12-14T00:28:51.156Z,1513211331.156 [SBIT](DEBUG): Construct Startup Built In Test.
2017-12-14T00:28:51.184Z,1513211331.184 [SBIT] Loaded
2017-12-14T00:28:51.185Z,1513211331.185 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-12-14T00:28:51.185Z,1513211331.185 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-12-14T00:28:51.211Z,1513211331.211 [IBIT] Loaded
2017-12-14T00:28:51.211Z,1513211331.211 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-12-14T00:28:51.215Z,1513211331.215 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-12-14T00:28:51.358Z,1513211331.358 [CBIT] Loaded
2017-12-14T00:28:51.358Z,1513211331.358 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-12-14T00:28:51.359Z,1513211331.359 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-12-14T00:28:51.359Z,1513211331.359 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-12-14T00:28:51.444Z,1513211331.444 [VerticalControl](DEBUG): Construct VerticalControl.
2017-12-14T00:28:51.537Z,1513211331.537 [VerticalControl] Loaded
2017-12-14T00:28:51.537Z,1513211331.537 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-12-14T00:28:51.538Z,1513211331.538 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-12-14T00:28:51.594Z,1513211331.594 [HorizontalControl] Loaded
2017-12-14T00:28:51.594Z,1513211331.594 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-12-14T00:28:51.595Z,1513211331.595 [SpeedControl](DEBUG): Construct SpeedControl.
2017-12-14T00:28:51.600Z,1513211331.600 [SpeedControl] Loaded
2017-12-14T00:28:51.600Z,1513211331.600 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-12-14T00:28:51.601Z,1513211331.601 [LoopControl](DEBUG): Construct LoopControl.
2017-12-14T00:28:51.601Z,1513211331.601 [LoopControl] Loaded
2017-12-14T00:28:51.602Z,1513211331.602 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-12-14T00:28:51.602Z,1513211331.602 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-12-14T00:28:51.603Z,1513211331.603 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-12-14T00:28:51.655Z,1513211331.655 [DepthRateCalculator] Loaded
2017-12-14T00:28:51.655Z,1513211331.655 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-12-14T00:28:51.660Z,1513211331.660 [PitchRateCalculator] Loaded
2017-12-14T00:28:51.660Z,1513211331.660 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-12-14T00:28:51.675Z,1513211331.675 [SpeedCalculator] Loaded
2017-12-14T00:28:51.675Z,1513211331.675 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-12-14T00:28:51.696Z,1513211331.696 [TempGradientCalculator] Loaded
2017-12-14T00:28:51.696Z,1513211331.696 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-12-14T00:28:51.711Z,1513211331.711 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-12-14T00:28:51.711Z,1513211331.711 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-12-14T00:28:51.715Z,1513211331.715 [YawRateCalculator] Loaded
2017-12-14T00:28:51.716Z,1513211331.716 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-12-14T00:28:51.716Z,1513211331.716 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-12-14T00:28:51.717Z,1513211331.717 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-12-14T00:28:51.833Z,1513211331.833 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-12-14T00:28:51.833Z,1513211331.833 [StratificationFrontDetector](DEBUG): (re)initializing
2017-12-14T00:28:51.833Z,1513211331.833 [StratificationFrontDetector] Loaded
2017-12-14T00:28:51.834Z,1513211331.834 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-12-14T00:28:51.834Z,1513211331.834 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-12-14T00:28:51.835Z,1513211331.835 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-12-14T00:28:52.093Z,1513211332.093 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-12-14T00:28:52.094Z,1513211332.094 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-12-14T00:28:52.203Z,1513211332.203 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-12-14T00:28:52.203Z,1513211332.203 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-12-14T00:28:52.255Z,1513211332.255 [DeadReckonUsingSpeedCalculator] Loaded
2017-12-14T00:28:52.255Z,1513211332.255 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-12-14T00:28:52.306Z,1513211332.306 [DeadReckonWithRespectToSeafloor] Loaded
2017-12-14T00:28:52.307Z,1513211332.307 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-12-14T00:28:52.322Z,1513211332.322 [NavChart] Loaded
2017-12-14T00:28:52.322Z,1513211332.322 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-12-14T00:28:52.326Z,1513211332.326 [UniversalFixResidualReporter] Loaded
2017-12-14T00:28:52.326Z,1513211332.326 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-12-14T00:28:52.327Z,1513211332.327 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-12-14T00:28:52.327Z,1513211332.327 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-12-14T00:28:52.352Z,1513211332.352 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-12-14T00:28:52.354Z,1513211332.354 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-12-14T00:28:52.543Z,1513211332.543 [Aanderaa_O2] Loaded
2017-12-14T00:28:52.543Z,1513211332.543 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-12-14T00:28:52.576Z,1513211332.576 [CTD_Seabird] Loaded
2017-12-14T00:28:52.576Z,1513211332.576 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-12-14T00:28:52.577Z,1513211332.577 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406CF4E0
2017-12-14T00:28:52.577Z,1513211332.577 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 885
2017-12-14T00:28:52.593Z,1513211332.593 [ESPComponent] Loaded
2017-12-14T00:28:52.593Z,1513211332.593 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-12-14T00:28:52.607Z,1513211332.607 [PAR_Licor] Loaded
2017-12-14T00:28:52.607Z,1513211332.607 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-12-14T00:28:52.654Z,1513211332.654 [WetLabsBB2FL] Loaded
2017-12-14T00:28:52.654Z,1513211332.654 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-12-14T00:28:52.655Z,1513211332.655 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 406FF4E0
2017-12-14T00:28:52.655Z,1513211332.655 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 886
2017-12-14T00:28:52.696Z,1513211332.696 [WetLabsSeaOWL_UV_A] Loaded
2017-12-14T00:28:52.696Z,1513211332.696 [ComponentRegistry](DEBUG): Component "WetLabsSeaOWL_UV_A" handled in its own thread.
2017-12-14T00:28:52.697Z,1513211332.697 [WetLabsSeaOWL_UV_A ThreadHandler](DEBUG): Created PCaller Thread at 4072F4E0
2017-12-14T00:28:52.698Z,1513211332.698 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Protected caller Thread ID is 887
2017-12-14T00:28:52.698Z,1513211332.698 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-12-14T00:28:52.699Z,1513211332.699 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-12-14T00:28:53.218Z,1513211333.218 [DataOverHttps] Loaded
2017-12-14T00:28:53.218Z,1513211333.218 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-12-14T00:28:53.231Z,1513211333.231 [Depth_Keller] Loaded
2017-12-14T00:28:53.231Z,1513211333.231 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-12-14T00:28:53.236Z,1513211333.236 [DropWeight] Loaded
2017-12-14T00:28:53.236Z,1513211333.236 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-12-14T00:28:53.321Z,1513211333.321 [NAL9602] Loaded
2017-12-14T00:28:53.321Z,1513211333.321 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-12-14T00:28:53.326Z,1513211333.326 [Onboard] Loaded
2017-12-14T00:28:53.326Z,1513211333.326 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-12-14T00:28:53.333Z,1513211333.333 [Radio_Surface] Loaded
2017-12-14T00:28:53.333Z,1513211333.333 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-12-14T00:28:53.334Z,1513211333.334 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409734E0
2017-12-14T00:28:53.335Z,1513211333.335 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 888
2017-12-14T00:28:53.484Z,1513211333.484 [PNI_TCM] Loaded
2017-12-14T00:28:53.485Z,1513211333.485 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-12-14T00:28:53.542Z,1513211333.542 [Rowe_600LCM] Loaded
2017-12-14T00:28:53.542Z,1513211333.542 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-12-14T00:28:53.543Z,1513211333.543 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409A34E0
2017-12-14T00:28:53.543Z,1513211333.543 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 889
2017-12-14T00:28:55.753Z,1513211335.753 [BPC1] Loaded
2017-12-14T00:28:55.753Z,1513211335.753 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-12-14T00:28:55.754Z,1513211335.754 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-12-14T00:28:55.754Z,1513211335.754 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-12-14T00:28:55.868Z,1513211335.868 [BuoyancyServo] Loaded
2017-12-14T00:28:55.869Z,1513211335.869 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-12-14T00:28:55.880Z,1513211335.880 [ElevatorServo] Loaded
2017-12-14T00:28:55.880Z,1513211335.880 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-12-14T00:28:55.890Z,1513211335.890 [MassServo] Loaded
2017-12-14T00:28:55.891Z,1513211335.891 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-12-14T00:28:55.901Z,1513211335.901 [RudderServo] Loaded
2017-12-14T00:28:55.901Z,1513211335.901 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-12-14T00:28:55.911Z,1513211335.911 [ThrusterServo] Loaded
2017-12-14T00:28:55.912Z,1513211335.912 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-12-14T00:28:55.912Z,1513211335.912 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-12-14T00:28:55.913Z,1513211335.913 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-12-14T00:28:56.033Z,1513211336.033 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-12-14T00:28:56.033Z,1513211336.033 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-12-14T00:28:56.070Z,1513211336.070 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-12-14T00:28:56.073Z,1513211336.073 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-12-14T00:28:56.074Z,1513211336.074 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-12-14T00:28:56.080Z,1513211336.080 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-12-14T00:28:56.081Z,1513211336.081 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A4A4E0
2017-12-14T00:28:56.082Z,1513211336.082 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 890
2017-12-14T00:28:56.086Z,1513211336.086 [Supervisor](INFO): Main Thread ID is 797
2017-12-14T00:28:56.086Z,1513211336.086 [Supervisor](DEBUG): Running supervisor.
2017-12-14T00:28:56.087Z,1513211336.087 [CommandLine ThreadHandler](INFO): Handler Thread ID is 891
2017-12-14T00:28:56.089Z,1513211336.089 [controlThread ThreadHandler](INFO): Handler Thread ID is 892
2017-12-14T00:28:56.090Z,1513211336.090 [controlThread](DEBUG): Initializing ControlThread
2017-12-14T00:28:56.091Z,1513211336.091 [SBIT](INFO): Initialize SBIT Component.
2017-12-14T00:28:56.091Z,1513211336.091 [SBIT](IMPORTANT): git: 2017-11-20-3-gb0389ee
2017-12-14T00:28:56.091Z,1513211336.091 [SBIT](INFO): git hash: b0389eed17bddc8251b1231910f9148d930dbf7d
2017-12-14T00:28:56.092Z,1513211336.092 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-12-14T00:28:56.093Z,1513211336.093 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #1 PREEMPT Wed Nov 29 17:23:09 PST 2017
2017-12-14T00:28:56.094Z,1513211336.094 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2017-12-14T00:28:56.095Z,1513211336.095 [IBIT](INFO): Initialize IBIT Component.
2017-12-14T00:28:56.095Z,1513211336.095 [CBIT](DEBUG): Initialize CBIT Component.
2017-12-14T00:28:56.096Z,1513211336.096 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2017-12-14T00:28:56.096Z,1513211336.096 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-12-14T00:28:56.097Z,1513211336.097 [logger ThreadHandler](INFO): Handler Thread ID is 893
2017-12-14T00:28:56.125Z,1513211336.125 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 894
2017-12-14T00:28:56.126Z,1513211336.126 [CTD_Seabird](INFO): Initializing
2017-12-14T00:28:56.161Z,1513211336.161 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 896
2017-12-14T00:28:56.163Z,1513211336.163 [WetLabsBB2FL](INFO): Powering down
2017-12-14T00:28:56.177Z,1513211336.177 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-12-14T00:28:56.179Z,1513211336.179 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-12-14T00:28:56.180Z,1513211336.180 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-12-14T00:28:56.181Z,1513211336.181 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-12-14T00:28:56.181Z,1513211336.181 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-12-14T00:28:56.182Z,1513211336.182 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-12-14T00:28:56.182Z,1513211336.182 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-12-14T00:28:56.182Z,1513211336.182 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-12-14T00:28:56.183Z,1513211336.183 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-12-14T00:28:56.184Z,1513211336.184 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-12-14T00:28:56.184Z,1513211336.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:28:56.185Z,1513211336.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:28:56.185Z,1513211336.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:28:56.186Z,1513211336.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:28:56.186Z,1513211336.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:28:56.187Z,1513211336.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:28:56.187Z,1513211336.187 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:28:56.188Z,1513211336.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:28:56.188Z,1513211336.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:28:56.188Z,1513211336.188 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-12-14T00:28:56.189Z,1513211336.189 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-12-14T00:28:56.217Z,1513211336.217 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Handler Thread ID is 897
2017-12-14T00:28:56.224Z,1513211336.224 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-12-14T00:28:56.242Z,1513211336.242 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 898
2017-12-14T00:28:56.247Z,1513211336.247 [Radio_Surface](INFO): Powering up
2017-12-14T00:28:56.261Z,1513211336.261 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 899
2017-12-14T00:28:56.262Z,1513211336.262 [Rowe_600LCM](INFO): Initializing
2017-12-14T00:28:56.263Z,1513211336.263 [Rowe_600LCM](INFO): Checking LCM
2017-12-14T00:28:56.384Z,1513211336.384 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-12-14T00:28:56.384Z,1513211336.384 [CTD_Seabird](INFO): Powering down
2017-12-14T00:28:56.385Z,1513211336.385 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 900
2017-12-14T00:28:56.395Z,1513211336.395 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-12-14T00:28:56.395Z,1513211336.395 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-12-14T00:28:56.396Z,1513211336.396 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-12-14T00:28:56.396Z,1513211336.396 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-12-14T00:28:56.396Z,1513211336.396 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-12-14T00:28:56.396Z,1513211336.396 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-12-14T00:28:56.397Z,1513211336.397 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-12-14T00:28:56.397Z,1513211336.397 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-12-14T00:28:56.397Z,1513211336.397 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-12-14T00:28:56.397Z,1513211336.397 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-12-14T00:28:56.398Z,1513211336.398 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-12-14T00:28:56.398Z,1513211336.398 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-12-14T00:28:56.398Z,1513211336.398 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-12-14T00:28:56.398Z,1513211336.398 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-12-14T00:28:56.398Z,1513211336.398 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-12-14T00:28:56.399Z,1513211336.399 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-12-14T00:28:56.457Z,1513211336.457 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-12-14T00:28:56.588Z,1513211336.588 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-12-14T00:28:56.589Z,1513211336.589 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-12-14T00:28:56.698Z,1513211336.698 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-12-14T00:28:56.702Z,1513211336.702 [Default:A.Wait](DEBUG): Construct Wait.
2017-12-14T00:28:56.703Z,1513211336.703 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-12-14T00:28:56.750Z,1513211336.750 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-12-14T00:28:56.753Z,1513211336.753 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-12-14T00:28:56.806Z,1513211336.806 [Default:E.Execute](DEBUG): Construct Execute.
2017-12-14T00:28:56.812Z,1513211336.812 [Rowe_600LCM](INFO): LCM OK
2017-12-14T00:28:56.812Z,1513211336.812 [Rowe_600LCM](INFO): Powering up
2017-12-14T00:28:56.814Z,1513211336.814 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-12-14T00:28:56.819Z,1513211336.819 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-12-14T00:28:56.874Z,1513211336.874 [ESPComponent](INFO): powering down ESP
2017-12-14T00:28:57.163Z,1513211337.163 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-12-14T00:28:57.537Z,1513211337.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:57.538Z,1513211337.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:28:57.612Z,1513211337.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:28:57.621Z,1513211337.621 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:57.641Z,1513211337.641 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:57.761Z,1513211337.761 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:28:57.765Z,1513211337.765 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-12-14T00:28:57.787Z,1513211337.787 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:28:57.793Z,1513211337.793 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-12-14T00:28:57.811Z,1513211337.811 [MassServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:28:57.817Z,1513211337.817 [MassServo](DEBUG): Initializing MassServo.
2017-12-14T00:28:57.831Z,1513211337.831 [RudderServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:28:57.837Z,1513211337.837 [RudderServo](DEBUG): Initializing RudderServo.
2017-12-14T00:28:57.844Z,1513211337.844 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:28:57.849Z,1513211337.849 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-12-14T00:28:58.162Z,1513211338.162 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T00:28:58.163Z,1513211338.163 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T00:28:58.163Z,1513211338.163 [DropWeight](ERROR): Hardware Fault
2017-12-14T00:28:58.245Z,1513211338.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.245Z,1513211338.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:28:58.246Z,1513211338.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:28:58.247Z,1513211338.247 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.248Z,1513211338.248 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.597Z,1513211338.597 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-12-14T00:28:58.597Z,1513211338.597 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-12-14T00:28:58.597Z,1513211338.597 [BuoyancyServo] Communications Fault, FailCount= 1
2017-12-14T00:28:58.597Z,1513211338.597 [BuoyancyServo](ERROR): Communications Fault
2017-12-14T00:28:58.838Z,1513211338.838 [CommandLine](FAULT): Scheduling is paused
2017-12-14T00:28:58.839Z,1513211338.839 [CBIT](INFO): Critical error at 20171214T002858
2017-12-14T00:28:58.839Z,1513211338.839 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-12-14T00:28:58.841Z,1513211338.841 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T00:28:58.842Z,1513211338.842 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T00:28:58.842Z,1513211338.842 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-12-14T00:28:58.912Z,1513211338.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.912Z,1513211338.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:28:58.913Z,1513211338.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:28:58.929Z,1513211338.929 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.930Z,1513211338.930 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:58.935Z,1513211338.935 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-12-14T00:28:58.936Z,1513211338.936 [BuoyancyServo](INFO): Powering down
2017-12-14T00:28:59.028Z,1513211339.028 [CBIT](INFO): Critical error at 20171214T002858
2017-12-14T00:28:59.289Z,1513211339.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:59.289Z,1513211339.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:28:59.290Z,1513211339.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:28:59.291Z,1513211339.291 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:59.291Z,1513211339.291 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:59.712Z,1513211339.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:59.712Z,1513211339.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:28:59.713Z,1513211339.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:28:59.714Z,1513211339.714 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:28:59.715Z,1513211339.715 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.173Z,1513211340.173 [Aanderaa_O2](INFO): Powering down
2017-12-14T00:29:00.318Z,1513211340.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.318Z,1513211340.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:29:00.319Z,1513211340.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:00.320Z,1513211340.320 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.320Z,1513211340.320 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.547Z,1513211340.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.547Z,1513211340.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:29:00.548Z,1513211340.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:00.549Z,1513211340.549 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.550Z,1513211340.550 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-14T00:29:00.703Z,1513211340.703 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-12-14T00:29:00.780Z,1513211340.780 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-12-14T00:29:00.918Z,1513211340.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:29:00.920Z,1513211340.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:00.963Z,1513211340.963 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-12-14T00:29:00.964Z,1513211340.964 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-12-14T00:29:00.964Z,1513211340.964 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-12-14T00:29:01.083Z,1513211341.083 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-12-14T00:29:01.083Z,1513211341.083 [BuoyancyServo] No Fault, FailCount= 1
2017-12-14T00:29:01.349Z,1513211341.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:29:01.350Z,1513211341.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:01.392Z,1513211341.392 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-12-14T00:29:01.405Z,1513211341.405 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-12-14T00:29:01.730Z,1513211341.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-14T00:29:01.731Z,1513211341.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:02.131Z,1513211342.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:02.523Z,1513211342.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:02.939Z,1513211342.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:03.311Z,1513211343.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:03.709Z,1513211343.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:04.114Z,1513211344.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:04.538Z,1513211344.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:04.907Z,1513211344.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:05.343Z,1513211345.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:05.750Z,1513211345.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:06.161Z,1513211346.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:06.493Z,1513211346.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:06.911Z,1513211346.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:07.330Z,1513211347.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:07.735Z,1513211347.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:08.216Z,1513211348.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:08.542Z,1513211348.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:08.919Z,1513211348.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:09.319Z,1513211349.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:09.712Z,1513211349.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:10.127Z,1513211350.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:10.503Z,1513211350.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:10.964Z,1513211350.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:11.336Z,1513211351.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:11.714Z,1513211351.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:12.122Z,1513211352.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:12.509Z,1513211352.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:12.965Z,1513211352.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:13.307Z,1513211353.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:13.716Z,1513211353.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:14.108Z,1513211354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:14.516Z,1513211354.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:14.968Z,1513211354.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:15.304Z,1513211355.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:15.748Z,1513211355.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:16.130Z,1513211356.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:16.502Z,1513211356.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:16.973Z,1513211356.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:17.311Z,1513211357.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:17.759Z,1513211357.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:18.138Z,1513211358.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:18.507Z,1513211358.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:18.963Z,1513211358.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:19.372Z,1513211359.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:19.746Z,1513211359.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:20.119Z,1513211360.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:20.578Z,1513211360.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:20.910Z,1513211360.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:21.330Z,1513211361.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:21.732Z,1513211361.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:22.122Z,1513211362.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:22.534Z,1513211362.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:22.958Z,1513211362.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:23.326Z,1513211363.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:23.662Z,1513211363.662 [NAL9602](INFO): Powering up NAL9602
2017-12-14T00:29:23.742Z,1513211363.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:24.115Z,1513211364.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:24.522Z,1513211364.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:24.920Z,1513211364.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:25.400Z,1513211365.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:25.718Z,1513211365.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:26.121Z,1513211366.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:26.523Z,1513211366.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:26.994Z,1513211366.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:27.301Z,1513211367.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:27.704Z,1513211367.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:28.146Z,1513211368.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:28.511Z,1513211368.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:28.977Z,1513211368.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:29.323Z,1513211369.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:29.738Z,1513211369.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:30.136Z,1513211370.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:30.534Z,1513211370.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:30.934Z,1513211370.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:31.318Z,1513211371.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:31.712Z,1513211371.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:32.127Z,1513211372.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:32.551Z,1513211372.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:32.965Z,1513211372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:33.335Z,1513211373.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:33.730Z,1513211373.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:34.139Z,1513211374.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:34.490Z,1513211374.490 [NAL9602](INFO): NAL9602 initialized
2017-12-14T00:29:34.540Z,1513211374.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:35.018Z,1513211375.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:35.326Z,1513211375.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:35.728Z,1513211375.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:36.159Z,1513211376.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:36.535Z,1513211376.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:36.930Z,1513211376.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:37.385Z,1513211377.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:37.739Z,1513211377.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:38.131Z,1513211378.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:38.537Z,1513211378.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:38.932Z,1513211378.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:39.378Z,1513211379.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:39.779Z,1513211379.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:40.112Z,1513211380.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:40.555Z,1513211380.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:40.979Z,1513211380.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:41.313Z,1513211381.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:41.753Z,1513211381.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:42.119Z,1513211382.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:42.563Z,1513211382.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:42.987Z,1513211382.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:43.375Z,1513211383.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:43.727Z,1513211383.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:44.099Z,1513211384.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:44.513Z,1513211384.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:44.966Z,1513211384.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:45.319Z,1513211385.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:45.719Z,1513211385.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:46.127Z,1513211386.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:46.507Z,1513211386.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:46.963Z,1513211386.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:47.321Z,1513211387.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:47.716Z,1513211387.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:48.126Z,1513211388.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:48.531Z,1513211388.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:48.934Z,1513211388.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:49.315Z,1513211389.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:49.713Z,1513211389.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:50.111Z,1513211390.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:50.508Z,1513211390.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:50.927Z,1513211390.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:51.415Z,1513211391.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:51.715Z,1513211391.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:51.770Z,1513211391.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:29:52.128Z,1513211392.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:52.516Z,1513211392.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:52.570Z,1513211392.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:29:52.936Z,1513211392.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:53.363Z,1513211393.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:53.707Z,1513211393.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:54.110Z,1513211394.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:54.507Z,1513211394.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:54.967Z,1513211394.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:55.307Z,1513211395.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:55.720Z,1513211395.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:56.108Z,1513211396.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:56.515Z,1513211396.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:56.948Z,1513211396.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:57.315Z,1513211397.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:57.742Z,1513211397.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:58.145Z,1513211398.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:58.528Z,1513211398.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:58.983Z,1513211398.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:59.327Z,1513211399.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:29:59.714Z,1513211399.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:00.114Z,1513211400.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:00.519Z,1513211400.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:00.976Z,1513211400.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:01.299Z,1513211401.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:01.722Z,1513211401.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:02.092Z,1513211402.092 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T00:30:02.092Z,1513211402.092 [BPC1] Data Fault, FailCount= 1
2017-12-14T00:30:02.092Z,1513211402.092 [BPC1](ERROR): Data Fault
2017-12-14T00:30:02.099Z,1513211402.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:02.124Z,1513211402.124 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T00:30:02.509Z,1513211402.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:02.912Z,1513211402.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:03.313Z,1513211403.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:03.326Z,1513211403.326 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:30:03.326Z,1513211403.326 [BPC1] No Fault, FailCount= 1
2017-12-14T00:30:03.759Z,1513211403.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:04.123Z,1513211404.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:04.515Z,1513211404.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:04.904Z,1513211404.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:05.360Z,1513211405.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:05.708Z,1513211405.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:06.108Z,1513211406.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:06.512Z,1513211406.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:06.901Z,1513211406.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:07.360Z,1513211407.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:07.715Z,1513211407.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:08.098Z,1513211408.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:08.523Z,1513211408.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:08.000Z,1513211409.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:09.312Z,1513211409.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:09.718Z,1513211409.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:10.105Z,1513211410.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:10.500Z,1513211410.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:10.947Z,1513211410.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:11.294Z,1513211411.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:11.718Z,1513211411.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:12.134Z,1513211412.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:12.499Z,1513211412.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:12.942Z,1513211412.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:13.337Z,1513211413.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:13.727Z,1513211413.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:14.116Z,1513211414.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:14.516Z,1513211414.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:14.980Z,1513211414.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:15.325Z,1513211415.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:15.703Z,1513211415.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:15.735Z,1513211415.735 [SBIT](IMPORTANT): Beginning Startup BIT
2017-12-14T00:30:15.739Z,1513211415.739 [CBIT](IMPORTANT): Beginning ground fault scan
2017-12-14T00:30:16.123Z,1513211416.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:16.499Z,1513211416.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:16.901Z,1513211416.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:17.316Z,1513211417.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:17.703Z,1513211417.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:18.263Z,1513211418.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:18.652Z,1513211418.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:19.059Z,1513211419.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:19.459Z,1513211419.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:19.865Z,1513211419.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:20.267Z,1513211420.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:20.659Z,1513211420.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:21.055Z,1513211421.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:21.459Z,1513211421.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:21.858Z,1513211421.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:22.257Z,1513211422.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:22.656Z,1513211422.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:23.067Z,1513211423.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:23.455Z,1513211423.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:23.929Z,1513211423.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:24.268Z,1513211424.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:24.671Z,1513211424.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:25.083Z,1513211425.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:25.477Z,1513211425.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:25.878Z,1513211425.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:26.251Z,1513211426.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:26.642Z,1513211426.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:26.693Z,1513211426.693 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.005172
CHAN A1 (24V): 0.126354
CHAN A2 (12V): 0.000307
CHAN A3 (5V): -0.001700
CHAN B0 (3.3V): -0.001076
CHAN B1 (3.15aV): -0.001450
CHAN B2 (3.15bV): -0.000922
CHAN B3 (GND): -0.001481
OPEN: 0.003361
Full Scale Calc: 4.765 mA, -1.589 mA
2017-12-14T00:30:27.057Z,1513211427.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:27.457Z,1513211427.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:27.918Z,1513211427.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:28.252Z,1513211428.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:28.647Z,1513211428.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:29.046Z,1513211429.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:29.464Z,1513211429.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:29.860Z,1513211429.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:30.256Z,1513211430.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:30.660Z,1513211430.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:31.140Z,1513211431.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:31.796Z,1513211431.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:32.180Z,1513211432.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:32.583Z,1513211432.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:32.975Z,1513211432.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:33.560Z,1513211433.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:33.807Z,1513211433.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:34.220Z,1513211434.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:34.608Z,1513211434.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:35.007Z,1513211435.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:35.400Z,1513211435.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:35.810Z,1513211435.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:36.176Z,1513211436.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:36.597Z,1513211436.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:37.032Z,1513211437.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:37.391Z,1513211437.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:37.803Z,1513211437.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:38.176Z,1513211438.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:38.603Z,1513211438.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:39.030Z,1513211439.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:39.376Z,1513211439.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:39.799Z,1513211439.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:40.200Z,1513211440.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:40.639Z,1513211440.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:41.044Z,1513211441.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:41.395Z,1513211441.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:41.796Z,1513211441.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:42.173Z,1513211442.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:42.573Z,1513211442.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:43.047Z,1513211443.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:43.404Z,1513211443.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:43.811Z,1513211443.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:44.180Z,1513211444.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:44.580Z,1513211444.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:45.043Z,1513211445.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:45.422Z,1513211445.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:45.800Z,1513211445.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:46.278Z,1513211446.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:46.595Z,1513211446.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:47.082Z,1513211447.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:47.351Z,1513211447.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:47.399Z,1513211447.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:47.751Z,1513211447.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:47.802Z,1513211447.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:48.188Z,1513211448.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:48.279Z,1513211448.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:48.545Z,1513211448.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:48.583Z,1513211448.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:48.959Z,1513211448.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:48.996Z,1513211448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:49.363Z,1513211449.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:49.396Z,1513211449.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:49.758Z,1513211449.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:49.802Z,1513211449.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:50.208Z,1513211450.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:50.246Z,1513211450.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:50.573Z,1513211450.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:50.604Z,1513211450.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:51.012Z,1513211451.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:51.048Z,1513211451.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:51.375Z,1513211451.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:51.408Z,1513211451.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:51.761Z,1513211451.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:51.810Z,1513211451.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:52.159Z,1513211452.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:52.174Z,1513211452.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:52.558Z,1513211452.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:52.585Z,1513211452.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:53.000Z,1513211453.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:53.057Z,1513211453.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:53.415Z,1513211453.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:53.776Z,1513211453.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:54.184Z,1513211454.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:54.561Z,1513211454.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:54.584Z,1513211454.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:54.994Z,1513211454.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:55.042Z,1513211455.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:55.375Z,1513211455.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:55.418Z,1513211455.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:55.770Z,1513211455.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:55.830Z,1513211455.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:56.185Z,1513211456.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:56.200Z,1513211456.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:56.607Z,1513211456.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:56.650Z,1513211456.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:56.983Z,1513211456.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:57.029Z,1513211457.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:57.366Z,1513211457.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:57.403Z,1513211457.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:57.762Z,1513211457.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:30:57.784Z,1513211457.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:58.183Z,1513211458.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:58.743Z,1513211458.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:59.151Z,1513211459.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:59.529Z,1513211459.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:30:59.931Z,1513211459.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:00.324Z,1513211460.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:00.755Z,1513211460.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:01.157Z,1513211461.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:01.551Z,1513211461.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:01.949Z,1513211461.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:02.331Z,1513211462.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:02.723Z,1513211462.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:03.128Z,1513211463.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:03.527Z,1513211463.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:03.931Z,1513211463.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:04.327Z,1513211464.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:04.728Z,1513211464.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:05.131Z,1513211465.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:05.527Z,1513211465.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:06.011Z,1513211466.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:06.336Z,1513211466.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:06.767Z,1513211466.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:07.136Z,1513211467.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:07.535Z,1513211467.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:07.986Z,1513211467.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:08.379Z,1513211468.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:08.731Z,1513211468.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:09.104Z,1513211469.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:09.177Z,1513211469.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:09.502Z,1513211469.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:09.573Z,1513211469.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:09.902Z,1513211469.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:09.930Z,1513211469.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:09.940Z,1513211469.940 [SBIT](IMPORTANT): SBIT PASSED
2017-12-14T00:31:10.296Z,1513211470.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:10.339Z,1513211470.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:10.342Z,1513211470.342 [MissionManager](IMPORTANT): Started mission Startup
2017-12-14T00:31:10.342Z,1513211470.342 [Startup] Running Loop=1
2017-12-14T00:31:10.342Z,1513211470.342 [Startup](DEBUG): Aggregate::initialize Startup
2017-12-14T00:31:10.343Z,1513211470.343 [Startup:A.GoToSurface] Running Loop=1
2017-12-14T00:31:10.343Z,1513211470.343 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-12-14T00:31:10.343Z,1513211470.343 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-12-14T00:31:10.344Z,1513211470.344 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-12-14T00:31:10.344Z,1513211470.344 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-12-14T00:31:10.344Z,1513211470.344 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-12-14T00:31:10.345Z,1513211470.345 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-12-14T00:31:10.351Z,1513211470.351 [Startup:StartupSatComms] Running Loop=1
2017-12-14T00:31:10.351Z,1513211470.351 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-12-14T00:31:10.351Z,1513211470.351 [Startup:StartupSatComms:A] Running Loop=1
2017-12-14T00:31:10.703Z,1513211470.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:10.735Z,1513211470.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:10.739Z,1513211470.739 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-12-14T00:31:11.134Z,1513211471.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:11.151Z,1513211471.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:11.527Z,1513211471.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:11.541Z,1513211471.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:11.928Z,1513211471.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:11.947Z,1513211471.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:12.326Z,1513211472.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:12.376Z,1513211472.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:12.702Z,1513211472.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:12.732Z,1513211472.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:13.107Z,1513211473.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:13.156Z,1513211473.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:13.508Z,1513211473.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:13.534Z,1513211473.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:13.902Z,1513211473.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:13.930Z,1513211473.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:14.307Z,1513211474.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:14.340Z,1513211474.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:14.702Z,1513211474.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:14.731Z,1513211474.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:15.107Z,1513211475.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:15.133Z,1513211475.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:15.503Z,1513211475.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:15.556Z,1513211475.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:15.903Z,1513211475.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:15.938Z,1513211475.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:16.328Z,1513211476.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:16.342Z,1513211476.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:16.727Z,1513211476.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:16.741Z,1513211476.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:17.138Z,1513211477.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:17.159Z,1513211477.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:17.512Z,1513211477.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:17.542Z,1513211477.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:17.913Z,1513211477.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:17.942Z,1513211477.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:23.997Z,1513211483.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:24.089Z,1513211484.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:24.228Z,1513211484.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:24.263Z,1513211484.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:24.648Z,1513211484.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:24.680Z,1513211484.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:24.986Z,1513211484.986 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003925
2017-12-14T00:31:25.034Z,1513211485.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:25.086Z,1513211485.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:25.407Z,1513211485.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:25.481Z,1513211485.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:25.837Z,1513211485.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:25.888Z,1513211485.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:26.201Z,1513211486.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:26.231Z,1513211486.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:26.605Z,1513211486.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:26.626Z,1513211486.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:27.090Z,1513211487.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:27.154Z,1513211487.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:27.408Z,1513211487.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:27.451Z,1513211487.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:27.795Z,1513211487.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:27.838Z,1513211487.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:28.191Z,1513211488.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:28.235Z,1513211488.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:28.684Z,1513211488.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:28.736Z,1513211488.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:29.010Z,1513211489.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:29.052Z,1513211489.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:29.399Z,1513211489.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:29.446Z,1513211489.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:29.882Z,1513211489.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:30.251Z,1513211490.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:30.640Z,1513211490.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:31.045Z,1513211491.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:31.452Z,1513211491.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:31.840Z,1513211491.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:32.237Z,1513211492.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:32.649Z,1513211492.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:33.062Z,1513211493.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:33.410Z,1513211493.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:33.442Z,1513211493.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:33.810Z,1513211493.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:33.833Z,1513211493.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:34.223Z,1513211494.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:34.238Z,1513211494.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:34.631Z,1513211494.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:34.648Z,1513211494.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:35.015Z,1513211495.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:35.066Z,1513211495.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:35.445Z,1513211495.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:35.467Z,1513211495.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:35.794Z,1513211495.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:35.847Z,1513211495.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:36.194Z,1513211496.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:36.292Z,1513211496.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:36.588Z,1513211496.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:36.633Z,1513211496.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:37.002Z,1513211497.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:37.008Z,1513211497.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T00:31:37.099Z,1513211497.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:37.436Z,1513211497.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:37.463Z,1513211497.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:37.817Z,1513211497.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:37.894Z,1513211497.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:38.207Z,1513211498.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:38.243Z,1513211498.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:38.627Z,1513211498.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:38.646Z,1513211498.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:39.011Z,1513211499.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:39.045Z,1513211499.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:39.441Z,1513211499.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:39.468Z,1513211499.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:39.809Z,1513211499.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:39.824Z,1513211499.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:40.210Z,1513211500.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:40.230Z,1513211500.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:40.614Z,1513211500.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:40.628Z,1513211500.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:41.044Z,1513211501.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:41.072Z,1513211501.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:41.386Z,1513211501.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:41.424Z,1513211501.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:41.790Z,1513211501.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:41.799Z,1513211501.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x51966 got:0x7233
2017-12-14T00:31:41.821Z,1513211501.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:42.203Z,1513211502.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:42.218Z,1513211502.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:42.589Z,1513211502.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:42.613Z,1513211502.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:42.990Z,1513211502.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:43.023Z,1513211503.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:43.404Z,1513211503.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:43.418Z,1513211503.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:43.790Z,1513211503.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:43.823Z,1513211503.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:44.190Z,1513211504.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:44.215Z,1513211504.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:44.606Z,1513211504.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:44.634Z,1513211504.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:45.045Z,1513211505.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:45.066Z,1513211505.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:45.423Z,1513211505.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:45.438Z,1513211505.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:45.814Z,1513211505.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:45.835Z,1513211505.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:46.187Z,1513211506.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:46.256Z,1513211506.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:46.590Z,1513211506.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:46.624Z,1513211506.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:46.997Z,1513211506.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:47.037Z,1513211507.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:47.395Z,1513211507.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:47.419Z,1513211507.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:47.865Z,1513211507.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:47.885Z,1513211507.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:48.191Z,1513211508.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:48.220Z,1513211508.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:48.591Z,1513211508.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:48.627Z,1513211508.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:49.036Z,1513211509.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:49.425Z,1513211509.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:49.837Z,1513211509.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:50.217Z,1513211510.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:50.239Z,1513211510.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:50.614Z,1513211510.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:50.645Z,1513211510.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:51.052Z,1513211511.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:51.090Z,1513211511.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:51.395Z,1513211511.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:51.422Z,1513211511.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:51.805Z,1513211511.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:51.819Z,1513211511.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:52.197Z,1513211512.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:52.212Z,1513211512.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:52.600Z,1513211512.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:52.617Z,1513211512.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:53.004Z,1513211513.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:53.049Z,1513211513.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:53.406Z,1513211513.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:53.421Z,1513211513.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:53.798Z,1513211513.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:53.813Z,1513211513.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:54.216Z,1513211514.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:54.253Z,1513211514.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:54.600Z,1513211514.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:54.623Z,1513211514.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:55.054Z,1513211515.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:55.077Z,1513211515.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:55.408Z,1513211515.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:55.427Z,1513211515.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:55.810Z,1513211515.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:31:55.825Z,1513211515.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:56.231Z,1513211516.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:56.231Z,1513211516.231 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-12-14T00:31:56.231Z,1513211516.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:31:56.233Z,1513211516.233 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:56.233Z,1513211516.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-12-14T00:31:56.233Z,1513211516.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:31:56.235Z,1513211516.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:56.235Z,1513211516.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-12-14T00:31:56.235Z,1513211516.235 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:31:56.276Z,1513211516.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:31:56.284Z,1513211516.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:31:56.284Z,1513211516.284 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:31:56.636Z,1513211516.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:31:56.637Z,1513211516.637 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-12-14T00:31:56.637Z,1513211516.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:31:56.637Z,1513211516.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-12-14T00:31:56.638Z,1513211516.638 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:31:56.638Z,1513211516.638 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-12-14T00:31:57.017Z,1513211517.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:31:57.017Z,1513211517.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:31:57.017Z,1513211517.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:31:57.018Z,1513211517.018 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:31:57.018Z,1513211517.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:31:57.018Z,1513211517.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:31:57.019Z,1513211517.019 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:31:57.019Z,1513211517.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:31:57.020Z,1513211517.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:31:57.487Z,1513211517.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:57.817Z,1513211517.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:58.243Z,1513211518.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:58.643Z,1513211518.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:59.027Z,1513211519.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:59.478Z,1513211519.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:31:59.828Z,1513211519.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:00.270Z,1513211520.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:00.639Z,1513211520.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:01.044Z,1513211521.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:01.436Z,1513211521.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:01.827Z,1513211521.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:02.211Z,1513211522.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:02.608Z,1513211522.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:03.050Z,1513211523.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:03.426Z,1513211523.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:03.857Z,1513211523.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:04.223Z,1513211524.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:04.618Z,1513211524.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:05.039Z,1513211525.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:05.443Z,1513211525.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:05.821Z,1513211525.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:06.222Z,1513211526.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:06.625Z,1513211526.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:07.110Z,1513211527.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:07.435Z,1513211527.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:07.820Z,1513211527.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:08.216Z,1513211528.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:08.659Z,1513211528.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:09.079Z,1513211529.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:09.397Z,1513211529.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:09.411Z,1513211529.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:09.796Z,1513211529.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:09.811Z,1513211529.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:10.210Z,1513211530.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:10.246Z,1513211530.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:10.611Z,1513211530.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:10.630Z,1513211530.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:10.634Z,1513211530.634 [Startup:StartupSatComms:A](INFO): Timed out from 2017-12-14T00:31:10.4Z
2017-12-14T00:32:10.634Z,1513211530.634 [Startup:StartupSatComms:A] Stopped
2017-12-14T00:32:10.634Z,1513211530.634 [Startup:StartupSatComms:B] Running Loop=1
2017-12-14T00:32:11.014Z,1513211531.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:11.029Z,1513211531.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:11.032Z,1513211531.032 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-12-14T00:32:11.889Z,1513211531.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:11.916Z,1513211531.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:12.022Z,1513211532.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:12.062Z,1513211532.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:15.873Z,1513211535.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:15.888Z,1513211535.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:15.965Z,1513211535.965 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171214T001403/Courier0008.lzma
2017-12-14T00:32:16.002Z,1513211536.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:16.028Z,1513211536.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:16.394Z,1513211536.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:16.423Z,1513211536.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:16.765Z,1513211536.765 [DataOverHttps](INFO): Moved sent file to Logs/20171214T001403/Courier0008.lzma.bak
2017-12-14T00:32:16.765Z,1513211536.765 [DataOverHttps](INFO): SBD MOMSN=5437244
2017-12-14T00:32:16.820Z,1513211536.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:16.835Z,1513211536.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:17.565Z,1513211537.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:17.587Z,1513211537.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:17.683Z,1513211537.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:32:17.719Z,1513211537.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:21.758Z,1513211541.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:21.880Z,1513211541.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:22.283Z,1513211542.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:22.647Z,1513211542.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:23.167Z,1513211543.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:23.443Z,1513211543.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:26.891Z,1513211546.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:26.974Z,1513211546.974 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20171214T002839/Courier0000.lzma
2017-12-14T00:32:27.039Z,1513211547.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:27.411Z,1513211547.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:27.743Z,1513211547.743 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0000.lzma.bak
2017-12-14T00:32:27.744Z,1513211547.744 [DataOverHttps](INFO): SBD MOMSN=5437246
2017-12-14T00:32:27.823Z,1513211547.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:29.038Z,1513211549.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x20547 got:0x16889
2017-12-14T00:32:29.038Z,1513211549.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x9964 got:0x16889
2017-12-14T00:32:29.039Z,1513211549.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x34830 got:0x16889
2017-12-14T00:32:29.086Z,1513211549.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:29.225Z,1513211549.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:33.178Z,1513211553.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:33.329Z,1513211553.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:33.674Z,1513211553.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:34.074Z,1513211554.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:34.451Z,1513211554.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:34.853Z,1513211554.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:40.446Z,1513211560.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:40.514Z,1513211560.514 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171214T001403/Express0009.lzma
2017-12-14T00:32:40.623Z,1513211560.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:40.979Z,1513211560.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:41.312Z,1513211561.312 [DataOverHttps](INFO): Moved sent file to Logs/20171214T001403/Express0009.lzma.bak
2017-12-14T00:32:41.313Z,1513211561.313 [DataOverHttps](INFO): SBD MOMSN=5437251
2017-12-14T00:32:41.492Z,1513211561.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:43.186Z,1513211563.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:43.349Z,1513211563.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:48.248Z,1513211568.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:48.411Z,1513211568.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:48.744Z,1513211568.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:49.187Z,1513211569.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:49.543Z,1513211569.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:49.979Z,1513211569.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:53.530Z,1513211573.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:53.623Z,1513211573.623 [DataOverHttps](INFO): Sending 650 bytes from file Logs/20171214T002839/Express0001.lzma
2017-12-14T00:32:53.703Z,1513211573.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:32:54.012Z,1513211574.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:08.078Z,1513211588.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:33:08.874Z,1513211588.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:33:14.889Z,1513211594.889 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0001.lzma.bak
2017-12-14T00:33:14.889Z,1513211594.889 [DataOverHttps](INFO): SBD MOMSN=5437253
2017-12-14T00:33:15.126Z,1513211595.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:15.130Z,1513211595.130 [Startup:StartupSatComms:B](INFO): Timed out from 2017-12-14T00:32:10.6Z
2017-12-14T00:33:15.130Z,1513211595.130 [Startup:StartupSatComms:B] Stopped
2017-12-14T00:33:15.130Z,1513211595.130 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-12-14T00:33:15.130Z,1513211595.130 [Startup:StartupSatComms] Stopped
2017-12-14T00:33:15.130Z,1513211595.130 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-12-14T00:33:15.131Z,1513211595.131 [Startup](INFO): Completed Startup
2017-12-14T00:33:15.131Z,1513211595.131 [MissionManager](INFO): Startup is completed.
2017-12-14T00:33:15.131Z,1513211595.131 [MissionManager](INFO): Uninitializing Mission Startup
2017-12-14T00:33:15.132Z,1513211595.132 [Startup] Stopped
2017-12-14T00:33:15.132Z,1513211595.132 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-12-14T00:33:15.132Z,1513211595.132 [Startup:A.GoToSurface] Stopped
2017-12-14T00:33:15.132Z,1513211595.132 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-12-14T00:33:15.360Z,1513211595.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:15.390Z,1513211595.390 [MissionManager](IMPORTANT): Started mission Default
2017-12-14T00:33:15.390Z,1513211595.390 [Default] Running Loop=1
2017-12-14T00:33:15.390Z,1513211595.390 [Default](DEBUG): Aggregate::initialize Default
2017-12-14T00:33:15.390Z,1513211595.390 [Default:B.GoToSurface] Running Loop=1
2017-12-14T00:33:15.390Z,1513211595.390 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-12-14T00:33:15.390Z,1513211595.390 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-12-14T00:33:15.391Z,1513211595.391 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-12-14T00:33:15.391Z,1513211595.391 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-12-14T00:33:15.391Z,1513211595.391 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-12-14T00:33:15.392Z,1513211595.392 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-12-14T00:33:15.392Z,1513211595.392 [Default:A.Wait] Running Loop=1
2017-12-14T00:33:15.392Z,1513211595.392 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-12-14T00:33:15.743Z,1513211595.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:21.654Z,1513211601.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:21.814Z,1513211601.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:22.191Z,1513211602.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:22.602Z,1513211602.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:22.956Z,1513211602.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:23.386Z,1513211603.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:23.758Z,1513211603.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:24.175Z,1513211604.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:24.571Z,1513211604.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:25.045Z,1513211605.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:25.371Z,1513211605.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:25.756Z,1513211605.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:26.156Z,1513211606.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:26.582Z,1513211606.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:27.146Z,1513211607.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:27.451Z,1513211607.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:27.765Z,1513211607.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:28.191Z,1513211608.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:28.559Z,1513211608.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:28.563Z,1513211608.563 [Default:A.Wait](INFO): Done Waiting.
2017-12-14T00:33:28.563Z,1513211608.563 [Default:A.Wait] Stopped
2017-12-14T00:33:28.563Z,1513211608.563 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T00:33:29.056Z,1513211609.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:29.072Z,1513211609.072 [Default:CheckIn] Running Loop=1
2017-12-14T00:33:29.073Z,1513211609.073 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T00:33:29.073Z,1513211609.073 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T00:33:29.371Z,1513211609.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:29.377Z,1513211609.377 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-12-14T00:33:29.775Z,1513211609.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:30.155Z,1513211610.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:30.611Z,1513211610.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:31.032Z,1513211611.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:31.377Z,1513211611.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:31.769Z,1513211611.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:32.167Z,1513211612.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:32.578Z,1513211612.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:33.058Z,1513211613.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:33.367Z,1513211613.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:33.808Z,1513211613.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:34.165Z,1513211614.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:34.294Z,1513211614.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:33:34.539Z,1513211614.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:34.972Z,1513211614.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:35.089Z,1513211615.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:33:35.381Z,1513211615.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:35.748Z,1513211615.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:36.149Z,1513211616.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:36.553Z,1513211616.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:37.000Z,1513211617.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:37.434Z,1513211617.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:37.773Z,1513211617.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:38.160Z,1513211618.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:38.556Z,1513211618.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:39.037Z,1513211619.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:39.377Z,1513211619.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:39.768Z,1513211619.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:40.197Z,1513211620.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:40.564Z,1513211620.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:41.028Z,1513211621.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:41.383Z,1513211621.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:41.755Z,1513211621.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:42.164Z,1513211622.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:42.611Z,1513211622.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:43.014Z,1513211623.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:43.415Z,1513211623.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:43.763Z,1513211623.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:44.160Z,1513211624.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:44.562Z,1513211624.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:45.040Z,1513211625.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:45.387Z,1513211625.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:45.779Z,1513211625.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:46.154Z,1513211626.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:46.594Z,1513211626.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:46.954Z,1513211626.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:47.386Z,1513211627.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:47.775Z,1513211627.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:48.176Z,1513211628.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:48.611Z,1513211628.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:48.982Z,1513211628.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:49.427Z,1513211629.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:49.891Z,1513211629.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:50.226Z,1513211630.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:50.588Z,1513211630.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:50.991Z,1513211630.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:51.379Z,1513211631.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:51.759Z,1513211631.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:52.151Z,1513211632.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:52.559Z,1513211632.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:53.059Z,1513211633.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:53.394Z,1513211633.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:53.790Z,1513211633.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:54.154Z,1513211634.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:54.554Z,1513211634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:55.018Z,1513211635.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:55.386Z,1513211635.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:55.751Z,1513211635.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:56.151Z,1513211636.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:56.566Z,1513211636.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:57.020Z,1513211637.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:57.379Z,1513211637.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:57.763Z,1513211637.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:58.168Z,1513211638.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:58.560Z,1513211638.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:59.050Z,1513211639.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:59.402Z,1513211639.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:33:59.755Z,1513211639.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:00.153Z,1513211640.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:00.563Z,1513211640.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:01.014Z,1513211641.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:01.359Z,1513211641.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:01.752Z,1513211641.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:02.153Z,1513211642.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:02.255Z,1513211642.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:34:02.575Z,1513211642.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:02.986Z,1513211642.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:03.049Z,1513211643.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:34:03.392Z,1513211643.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:03.771Z,1513211643.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:04.170Z,1513211644.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:04.570Z,1513211644.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:04.952Z,1513211644.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:05.380Z,1513211645.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:05.809Z,1513211645.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:06.154Z,1513211646.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:06.570Z,1513211646.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:07.025Z,1513211647.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:07.359Z,1513211647.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:07.764Z,1513211647.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:08.175Z,1513211648.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:08.575Z,1513211648.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:09.049Z,1513211649.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:09.398Z,1513211649.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:09.807Z,1513211649.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:10.163Z,1513211650.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:10.563Z,1513211650.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:11.044Z,1513211651.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:11.391Z,1513211651.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:11.787Z,1513211651.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:12.157Z,1513211652.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:12.599Z,1513211652.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:13.016Z,1513211653.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:13.410Z,1513211653.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:13.776Z,1513211653.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:14.187Z,1513211654.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:14.586Z,1513211654.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:15.023Z,1513211655.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:15.425Z,1513211655.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:15.764Z,1513211655.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:19.196Z,1513211659.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:19.390Z,1513211659.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:19.686Z,1513211659.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:20.095Z,1513211660.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:20.458Z,1513211660.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:20.944Z,1513211660.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:21.272Z,1513211661.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:21.664Z,1513211661.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:22.066Z,1513211662.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:22.470Z,1513211662.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:22.862Z,1513211662.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:23.263Z,1513211663.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:23.675Z,1513211663.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:24.082Z,1513211664.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:24.475Z,1513211664.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:24.980Z,1513211664.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:25.276Z,1513211665.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:25.676Z,1513211665.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:26.071Z,1513211666.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:26.468Z,1513211666.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:26.872Z,1513211666.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:27.289Z,1513211667.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:27.687Z,1513211667.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:28.068Z,1513211668.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:28.474Z,1513211668.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:28.874Z,1513211668.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:29.276Z,1513211669.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:29.687Z,1513211669.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:30.087Z,1513211670.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:30.480Z,1513211670.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:30.873Z,1513211670.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:31.379Z,1513211671.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:31.666Z,1513211671.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:32.077Z,1513211672.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:32.515Z,1513211672.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:32.869Z,1513211672.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:33.388Z,1513211673.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:33.699Z,1513211673.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:34.060Z,1513211674.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:34.526Z,1513211674.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:34.882Z,1513211674.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:35.284Z,1513211675.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:35.686Z,1513211675.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:36.087Z,1513211676.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:36.463Z,1513211676.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:36.864Z,1513211676.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:37.270Z,1513211677.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:37.672Z,1513211677.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:38.026Z,1513211678.026 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-12-14T00:34:38.076Z,1513211678.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:38.471Z,1513211678.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:38.876Z,1513211678.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:39.258Z,1513211679.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:39.691Z,1513211679.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:40.086Z,1513211680.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:40.459Z,1513211680.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:40.912Z,1513211680.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:41.268Z,1513211681.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:41.665Z,1513211681.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:42.092Z,1513211682.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:42.492Z,1513211682.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:42.896Z,1513211682.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:43.267Z,1513211683.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:43.675Z,1513211683.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:44.072Z,1513211684.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:44.475Z,1513211684.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:44.870Z,1513211684.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:45.336Z,1513211685.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:45.672Z,1513211685.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:46.092Z,1513211686.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:46.458Z,1513211686.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:46.867Z,1513211686.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:47.402Z,1513211687.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:47.671Z,1513211687.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:48.075Z,1513211688.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:48.476Z,1513211688.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:48.870Z,1513211688.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:49.283Z,1513211689.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:49.677Z,1513211689.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:50.070Z,1513211690.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:50.459Z,1513211690.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:50.882Z,1513211690.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:51.294Z,1513211691.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:51.696Z,1513211691.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:52.087Z,1513211692.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:52.481Z,1513211692.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:52.867Z,1513211692.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:53.270Z,1513211693.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:53.719Z,1513211693.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:54.083Z,1513211694.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:54.485Z,1513211694.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:54.966Z,1513211694.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:55.275Z,1513211695.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:55.675Z,1513211695.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:56.099Z,1513211696.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:56.465Z,1513211696.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:56.931Z,1513211696.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:57.286Z,1513211697.286 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:57.286Z,1513211697.286 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-12-14T00:34:57.287Z,1513211697.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:34:57.288Z,1513211697.288 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:57.288Z,1513211697.288 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2017-12-14T00:34:57.288Z,1513211697.288 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:34:57.290Z,1513211697.290 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:57.290Z,1513211697.290 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-12-14T00:34:57.290Z,1513211697.290 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:34:57.302Z,1513211697.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:34:57.302Z,1513211697.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:34:57.302Z,1513211697.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:34:57.698Z,1513211697.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:34:57.698Z,1513211697.698 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-12-14T00:34:57.699Z,1513211697.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:34:57.699Z,1513211697.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2017-12-14T00:34:57.699Z,1513211697.699 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:34:57.699Z,1513211697.699 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-12-14T00:34:58.075Z,1513211698.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:34:58.076Z,1513211698.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:34:58.076Z,1513211698.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:34:58.076Z,1513211698.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:34:58.094Z,1513211698.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:34:58.094Z,1513211698.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:34:58.094Z,1513211698.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:34:58.095Z,1513211698.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:34:58.095Z,1513211698.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:34:58.464Z,1513211698.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:58.865Z,1513211698.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:59.337Z,1513211699.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:34:59.668Z,1513211699.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:00.087Z,1513211700.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:00.494Z,1513211700.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:00.876Z,1513211700.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:01.349Z,1513211701.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:01.667Z,1513211701.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:02.062Z,1513211702.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:02.468Z,1513211702.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:02.862Z,1513211702.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:03.306Z,1513211703.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:03.679Z,1513211703.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:04.076Z,1513211704.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:04.465Z,1513211704.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:04.875Z,1513211704.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:05.291Z,1513211705.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:05.672Z,1513211705.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:06.087Z,1513211706.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:06.523Z,1513211706.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:06.891Z,1513211706.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:07.287Z,1513211707.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:07.663Z,1513211707.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:08.064Z,1513211708.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:08.467Z,1513211708.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:08.867Z,1513211708.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:09.278Z,1513211709.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:09.715Z,1513211709.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:10.075Z,1513211710.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:10.466Z,1513211710.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:10.874Z,1513211710.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:11.274Z,1513211711.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:11.674Z,1513211711.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:12.080Z,1513211712.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:12.484Z,1513211712.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:12.924Z,1513211712.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:13.335Z,1513211713.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:13.664Z,1513211713.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:14.062Z,1513211714.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:14.466Z,1513211714.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:14.863Z,1513211714.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:15.347Z,1513211715.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:15.692Z,1513211715.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:16.152Z,1513211716.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:19.623Z,1513211719.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:19.761Z,1513211719.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:20.173Z,1513211720.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:20.539Z,1513211720.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:21.023Z,1513211721.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:21.308Z,1513211721.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:21.735Z,1513211721.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:22.115Z,1513211722.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:22.594Z,1513211722.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:23.006Z,1513211723.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:23.343Z,1513211723.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:23.738Z,1513211723.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:24.139Z,1513211724.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:24.516Z,1513211724.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:24.915Z,1513211724.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:25.317Z,1513211725.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:25.745Z,1513211725.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:26.126Z,1513211726.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:26.531Z,1513211726.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:26.928Z,1513211726.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:27.373Z,1513211727.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:27.719Z,1513211727.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:28.126Z,1513211728.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:28.522Z,1513211728.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:28.940Z,1513211728.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:29.383Z,1513211729.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:29.744Z,1513211729.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:30.142Z,1513211730.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:30.535Z,1513211730.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:31.012Z,1513211731.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:31.306Z,1513211731.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:31.735Z,1513211731.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:32.160Z,1513211732.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:32.519Z,1513211732.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:32.999Z,1513211732.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:33.327Z,1513211733.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:33.715Z,1513211733.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:34.115Z,1513211734.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:34.515Z,1513211734.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:35.011Z,1513211735.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:35.365Z,1513211735.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:35.727Z,1513211735.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:36.130Z,1513211736.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:36.523Z,1513211736.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:36.000Z,1513211737.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:37.314Z,1513211737.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:37.716Z,1513211737.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:38.125Z,1513211738.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:38.571Z,1513211738.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:38.927Z,1513211738.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:39.332Z,1513211739.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:39.727Z,1513211739.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:40.140Z,1513211740.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:40.511Z,1513211740.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:40.934Z,1513211740.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:41.360Z,1513211741.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:41.760Z,1513211741.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:42.156Z,1513211742.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:42.514Z,1513211742.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:42.917Z,1513211742.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:43.414Z,1513211743.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:43.723Z,1513211743.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:44.158Z,1513211744.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:44.523Z,1513211744.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:45.026Z,1513211745.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:45.335Z,1513211745.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:45.716Z,1513211745.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:46.127Z,1513211746.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:46.518Z,1513211746.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:46.964Z,1513211746.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:47.320Z,1513211747.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:47.747Z,1513211747.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:48.122Z,1513211748.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:48.514Z,1513211748.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:49.000Z,1513211749.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:49.315Z,1513211749.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:49.715Z,1513211749.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:50.146Z,1513211750.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:50.515Z,1513211750.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:51.003Z,1513211751.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:51.319Z,1513211751.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:51.718Z,1513211751.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:52.118Z,1513211752.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:52.551Z,1513211752.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:52.918Z,1513211752.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:53.328Z,1513211753.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:53.729Z,1513211753.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:54.126Z,1513211754.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:54.563Z,1513211754.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:54.919Z,1513211754.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:55.386Z,1513211755.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:55.723Z,1513211755.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:56.133Z,1513211756.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:56.529Z,1513211756.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:56.927Z,1513211756.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:57.374Z,1513211757.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:57.768Z,1513211757.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:58.125Z,1513211758.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:58.523Z,1513211758.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:58.991Z,1513211758.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:59.342Z,1513211759.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:35:59.743Z,1513211759.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:00.124Z,1513211760.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:00.524Z,1513211760.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:01.009Z,1513211761.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:01.321Z,1513211761.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:01.716Z,1513211761.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:02.121Z,1513211762.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:02.527Z,1513211762.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:03.023Z,1513211763.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:03.314Z,1513211763.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:03.715Z,1513211763.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:04.143Z,1513211764.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:04.532Z,1513211764.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:04.989Z,1513211764.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:05.363Z,1513211765.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:05.743Z,1513211765.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:06.147Z,1513211766.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:06.516Z,1513211766.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:06.914Z,1513211766.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:07.397Z,1513211767.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:07.719Z,1513211767.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:08.134Z,1513211768.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:08.527Z,1513211768.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:08.932Z,1513211768.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:09.360Z,1513211769.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:09.721Z,1513211769.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:10.112Z,1513211770.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:10.543Z,1513211770.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:10.937Z,1513211770.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:11.392Z,1513211771.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:11.736Z,1513211771.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:12.140Z,1513211772.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:12.512Z,1513211772.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:12.991Z,1513211772.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:13.323Z,1513211773.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:13.755Z,1513211773.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:14.120Z,1513211774.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:14.548Z,1513211774.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:15.001Z,1513211775.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:15.323Z,1513211775.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:15.722Z,1513211775.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:16.114Z,1513211776.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:20.115Z,1513211780.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:20.334Z,1513211780.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:20.642Z,1513211780.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:21.104Z,1513211781.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:21.455Z,1513211781.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:21.857Z,1513211781.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:22.247Z,1513211782.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:22.654Z,1513211782.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:23.078Z,1513211783.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:23.474Z,1513211783.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:23.872Z,1513211783.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:24.316Z,1513211784.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:24.646Z,1513211784.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:25.114Z,1513211785.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:25.445Z,1513211785.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:25.848Z,1513211785.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:26.302Z,1513211786.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:26.647Z,1513211786.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:27.116Z,1513211787.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:27.452Z,1513211787.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:27.863Z,1513211787.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:28.235Z,1513211788.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:28.643Z,1513211788.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:29.062Z,1513211789.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:29.445Z,1513211789.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:29.861Z,1513211789.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:30.225Z,1513211790.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:30.642Z,1513211790.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:31.083Z,1513211791.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:31.491Z,1513211791.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:31.869Z,1513211791.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:32.267Z,1513211792.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:32.669Z,1513211792.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:33.093Z,1513211793.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:33.442Z,1513211793.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:33.890Z,1513211793.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:34.214Z,1513211794.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:34.619Z,1513211794.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:35.088Z,1513211795.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:35.455Z,1513211795.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:35.844Z,1513211795.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:36.257Z,1513211796.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:36.624Z,1513211796.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:37.016Z,1513211797.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:37.447Z,1513211797.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:37.820Z,1513211797.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:38.249Z,1513211798.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:38.710Z,1513211798.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:39.027Z,1513211799.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:39.444Z,1513211799.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:39.828Z,1513211799.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:40.226Z,1513211800.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:40.629Z,1513211800.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:41.043Z,1513211801.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:41.443Z,1513211801.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:41.843Z,1513211801.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:42.226Z,1513211802.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:42.622Z,1513211802.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:43.036Z,1513211803.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:43.477Z,1513211803.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:43.837Z,1513211803.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:44.232Z,1513211804.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:44.640Z,1513211804.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:45.041Z,1513211805.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:45.432Z,1513211805.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:45.832Z,1513211805.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:46.238Z,1513211806.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:46.665Z,1513211806.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:47.086Z,1513211807.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:47.447Z,1513211807.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:47.840Z,1513211807.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:48.296Z,1513211808.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:48.635Z,1513211808.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:49.072Z,1513211809.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:49.474Z,1513211809.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:49.898Z,1513211809.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:50.279Z,1513211810.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:50.646Z,1513211810.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:51.055Z,1513211811.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:51.434Z,1513211811.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:51.847Z,1513211811.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:52.245Z,1513211812.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:52.620Z,1513211812.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:53.073Z,1513211813.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:53.434Z,1513211813.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:53.830Z,1513211813.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:54.226Z,1513211814.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:54.628Z,1513211814.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:55.052Z,1513211815.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:55.452Z,1513211815.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:55.823Z,1513211815.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:56.268Z,1513211816.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:56.640Z,1513211816.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:57.043Z,1513211817.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:57.422Z,1513211817.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:57.831Z,1513211817.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:58.228Z,1513211818.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:58.654Z,1513211818.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:59.067Z,1513211819.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:59.472Z,1513211819.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:36:59.880Z,1513211819.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:00.225Z,1513211820.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:00.627Z,1513211820.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:01.030Z,1513211821.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:01.428Z,1513211821.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:01.876Z,1513211821.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:02.239Z,1513211822.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:02.668Z,1513211822.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:03.082Z,1513211823.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:03.424Z,1513211823.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:03.820Z,1513211823.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:04.221Z,1513211824.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:04.619Z,1513211824.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:05.055Z,1513211825.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:05.455Z,1513211825.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:05.864Z,1513211825.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:06.227Z,1513211826.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:06.631Z,1513211826.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:07.023Z,1513211827.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:07.422Z,1513211827.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:07.828Z,1513211827.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:08.229Z,1513211828.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:08.679Z,1513211828.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:09.088Z,1513211829.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:09.428Z,1513211829.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:09.831Z,1513211829.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:10.222Z,1513211830.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:10.674Z,1513211830.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:11.043Z,1513211831.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:11.462Z,1513211831.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:11.834Z,1513211831.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:12.274Z,1513211832.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:12.634Z,1513211832.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:13.033Z,1513211833.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:13.426Z,1513211833.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:13.827Z,1513211833.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:14.231Z,1513211834.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:14.631Z,1513211834.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:15.064Z,1513211835.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:15.476Z,1513211835.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:15.888Z,1513211835.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:16.253Z,1513211836.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:19.937Z,1513211839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:20.083Z,1513211840.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:20.468Z,1513211840.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:20.844Z,1513211840.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:21.224Z,1513211841.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:21.618Z,1513211841.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:22.023Z,1513211842.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:22.438Z,1513211842.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:22.827Z,1513211842.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:23.232Z,1513211843.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:23.632Z,1513211843.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:24.032Z,1513211844.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:24.431Z,1513211844.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:24.825Z,1513211844.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:25.276Z,1513211845.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:25.636Z,1513211845.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:26.032Z,1513211846.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:26.431Z,1513211846.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:26.851Z,1513211846.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:27.221Z,1513211847.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:27.624Z,1513211847.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:28.023Z,1513211848.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:28.505Z,1513211848.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:28.826Z,1513211848.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:29.250Z,1513211849.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:29.629Z,1513211849.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:30.050Z,1513211850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:30.423Z,1513211850.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:30.831Z,1513211850.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:31.271Z,1513211851.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:31.662Z,1513211851.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:32.032Z,1513211852.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:32.480Z,1513211852.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:32.835Z,1513211852.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:33.225Z,1513211853.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:33.654Z,1513211853.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:34.031Z,1513211854.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:34.454Z,1513211854.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:34.824Z,1513211854.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:35.232Z,1513211855.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:35.647Z,1513211855.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:36.038Z,1513211856.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:36.416Z,1513211856.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:36.815Z,1513211856.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:37.237Z,1513211857.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:37.620Z,1513211857.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:38.059Z,1513211858.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:38.457Z,1513211858.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:38.851Z,1513211858.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:39.238Z,1513211859.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:39.655Z,1513211859.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:40.049Z,1513211860.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:40.433Z,1513211860.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:40.834Z,1513211860.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:41.239Z,1513211861.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:41.636Z,1513211861.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:42.036Z,1513211862.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:42.433Z,1513211862.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:42.847Z,1513211862.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:43.236Z,1513211863.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:43.635Z,1513211863.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:44.037Z,1513211864.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:44.506Z,1513211864.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:44.836Z,1513211864.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:45.234Z,1513211865.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:45.636Z,1513211865.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:46.033Z,1513211866.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:46.427Z,1513211866.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:46.813Z,1513211866.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:47.240Z,1513211867.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:47.667Z,1513211867.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:48.051Z,1513211868.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:48.445Z,1513211868.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:48.831Z,1513211868.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:49.231Z,1513211869.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:49.631Z,1513211869.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:50.036Z,1513211870.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:50.443Z,1513211870.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:50.871Z,1513211870.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:51.234Z,1513211871.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:51.638Z,1513211871.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:52.039Z,1513211872.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:52.419Z,1513211872.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:52.821Z,1513211872.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:53.360Z,1513211873.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:53.648Z,1513211873.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:54.047Z,1513211874.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:54.425Z,1513211874.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:54.860Z,1513211874.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:55.227Z,1513211875.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:55.631Z,1513211875.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:56.055Z,1513211876.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:56.427Z,1513211876.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:56.867Z,1513211876.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:57.258Z,1513211877.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:57.634Z,1513211877.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:58.024Z,1513211878.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:58.424Z,1513211878.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:58.424Z,1513211878.424 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-12-14T00:37:58.424Z,1513211878.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:37:58.426Z,1513211878.426 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:58.426Z,1513211878.426 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2017-12-14T00:37:58.426Z,1513211878.426 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:37:58.428Z,1513211878.428 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:37:58.428Z,1513211878.428 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-12-14T00:37:58.428Z,1513211878.428 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:37:58.440Z,1513211878.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:37:58.441Z,1513211878.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:37:58.441Z,1513211878.441 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:37:58.841Z,1513211878.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:37:58.841Z,1513211878.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-12-14T00:37:58.842Z,1513211878.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:37:58.842Z,1513211878.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2017-12-14T00:37:58.842Z,1513211878.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:37:58.842Z,1513211878.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-12-14T00:37:59.231Z,1513211879.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:37:59.232Z,1513211879.232 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:37:59.232Z,1513211879.232 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:37:59.232Z,1513211879.232 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:37:59.233Z,1513211879.233 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:37:59.233Z,1513211879.233 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:37:59.234Z,1513211879.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:37:59.234Z,1513211879.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:37:59.234Z,1513211879.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:37:59.643Z,1513211879.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:00.032Z,1513211880.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:00.448Z,1513211880.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:00.829Z,1513211880.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:01.231Z,1513211881.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:01.628Z,1513211881.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:02.040Z,1513211882.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:02.441Z,1513211882.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:02.843Z,1513211882.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:03.220Z,1513211883.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:03.694Z,1513211883.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:04.022Z,1513211884.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:04.426Z,1513211884.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:04.812Z,1513211884.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:05.281Z,1513211885.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:05.647Z,1513211885.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:06.043Z,1513211886.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:06.443Z,1513211886.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:06.853Z,1513211886.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:07.230Z,1513211887.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:07.622Z,1513211887.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:08.032Z,1513211888.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:08.431Z,1513211888.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:08.828Z,1513211888.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:09.227Z,1513211889.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:09.626Z,1513211889.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:10.027Z,1513211890.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:10.423Z,1513211890.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:10.824Z,1513211890.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:11.235Z,1513211891.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:11.632Z,1513211891.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:12.032Z,1513211892.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:12.427Z,1513211892.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:12.831Z,1513211892.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:13.271Z,1513211893.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:13.633Z,1513211893.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:14.032Z,1513211894.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:14.442Z,1513211894.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:14.836Z,1513211894.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:15.231Z,1513211895.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:15.616Z,1513211895.616 [BPC1](ERROR): Failed to parse message.
2017-12-14T00:38:15.616Z,1513211895.616 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T00:38:15.616Z,1513211895.616 [BPC1] Data Fault, FailCount= 1
2017-12-14T00:38:15.616Z,1513211895.616 [BPC1](ERROR): Data Fault
2017-12-14T00:38:15.624Z,1513211895.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:15.638Z,1513211895.638 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T00:38:16.028Z,1513211896.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:16.467Z,1513211896.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:20.013Z,1513211900.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:20.042Z,1513211900.042 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:38:20.042Z,1513211900.042 [BPC1] No Fault, FailCount= 1
2017-12-14T00:38:20.207Z,1513211900.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:20.523Z,1513211900.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:21.011Z,1513211901.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:21.327Z,1513211901.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:21.706Z,1513211901.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:22.106Z,1513211902.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:22.507Z,1513211902.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:23.014Z,1513211903.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:23.303Z,1513211903.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:23.707Z,1513211903.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:24.129Z,1513211904.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:24.511Z,1513211904.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:24.963Z,1513211904.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:25.307Z,1513211905.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:25.710Z,1513211905.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:26.116Z,1513211906.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:26.523Z,1513211906.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:26.920Z,1513211906.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:27.306Z,1513211907.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:27.716Z,1513211907.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:28.093Z,1513211908.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:28.542Z,1513211908.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:28.899Z,1513211908.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:29.419Z,1513211909.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:29.435Z,1513211909.435 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T00:33:29.1Z
2017-12-14T00:38:29.435Z,1513211909.435 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T00:38:29.435Z,1513211909.435 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T00:38:29.724Z,1513211909.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:29.728Z,1513211909.728 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-12-14T00:38:30.486Z,1513211910.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:30.607Z,1513211910.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:34.201Z,1513211914.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:34.275Z,1513211914.275 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20171214T002839/Courier0004.lzma
2017-12-14T00:38:34.312Z,1513211914.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:34.704Z,1513211914.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:35.072Z,1513211915.072 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0004.lzma.bak
2017-12-14T00:38:35.072Z,1513211915.072 [DataOverHttps](INFO): SBD MOMSN=5437266
2017-12-14T00:38:35.151Z,1513211915.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:36.738Z,1513211916.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:36.887Z,1513211916.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:40.263Z,1513211920.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:40.406Z,1513211920.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:40.779Z,1513211920.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:41.171Z,1513211921.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:41.556Z,1513211921.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:41.967Z,1513211921.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:45.335Z,1513211925.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:45.453Z,1513211925.453 [DataOverHttps](INFO): Sending 177 bytes from file Logs/20171214T002839/Express0005.lzma
2017-12-14T00:38:45.552Z,1513211925.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:45.894Z,1513211925.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:46.231Z,1513211926.231 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0005.lzma.bak
2017-12-14T00:38:46.231Z,1513211926.231 [DataOverHttps](INFO): SBD MOMSN=5437268
2017-12-14T00:38:46.291Z,1513211926.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:47.495Z,1513211927.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:47.514Z,1513211927.514 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T00:38:47.514Z,1513211927.514 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T00:38:47.514Z,1513211927.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T00:38:47.638Z,1513211927.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:51.089Z,1513211931.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:51.223Z,1513211931.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:51.623Z,1513211931.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:52.034Z,1513211932.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:52.450Z,1513211932.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:52.794Z,1513211932.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:53.198Z,1513211933.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:53.636Z,1513211933.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:53.997Z,1513211933.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:54.422Z,1513211934.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:54.815Z,1513211934.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:55.207Z,1513211935.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:55.586Z,1513211935.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:56.010Z,1513211936.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:56.394Z,1513211936.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:56.427Z,1513211936.427 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T00:38:56.793Z,1513211936.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:57.222Z,1513211937.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:57.616Z,1513211937.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:58.025Z,1513211938.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:58.395Z,1513211938.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:58.838Z,1513211938.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:59.198Z,1513211939.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:38:59.603Z,1513211939.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:00.006Z,1513211940.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:00.415Z,1513211940.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:00.819Z,1513211940.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:01.227Z,1513211941.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:01.602Z,1513211941.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:02.003Z,1513211942.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:02.401Z,1513211942.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:02.802Z,1513211942.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:03.214Z,1513211943.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:03.609Z,1513211943.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:04.005Z,1513211944.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:04.447Z,1513211944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:04.873Z,1513211944.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:05.210Z,1513211945.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:05.623Z,1513211945.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:06.004Z,1513211946.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:06.408Z,1513211946.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:06.840Z,1513211946.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:07.203Z,1513211947.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:07.619Z,1513211947.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:07.987Z,1513211947.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:08.403Z,1513211948.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:08.787Z,1513211948.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:09.203Z,1513211949.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:09.607Z,1513211949.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:10.000Z,1513211950.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:10.383Z,1513211950.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:10.786Z,1513211950.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:11.300Z,1513211951.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:11.587Z,1513211951.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:11.999Z,1513211951.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:12.399Z,1513211952.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:12.799Z,1513211952.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:13.188Z,1513211953.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:13.591Z,1513211953.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:13.983Z,1513211953.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:14.389Z,1513211954.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:14.788Z,1513211954.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:15.197Z,1513211955.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:15.679Z,1513211955.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:15.999Z,1513211955.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:16.391Z,1513211956.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:16.790Z,1513211956.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:17.190Z,1513211957.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:17.592Z,1513211957.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:17.999Z,1513211957.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:18.502Z,1513211958.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:18.792Z,1513211958.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:19.190Z,1513211959.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:19.595Z,1513211959.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:19.992Z,1513211959.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:20.383Z,1513211960.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:20.787Z,1513211960.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:21.196Z,1513211961.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:21.600Z,1513211961.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:22.016Z,1513211962.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:22.383Z,1513211962.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:22.786Z,1513211962.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:23.187Z,1513211963.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:23.595Z,1513211963.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:24.007Z,1513211964.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:24.400Z,1513211964.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:24.807Z,1513211964.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:25.199Z,1513211965.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:25.599Z,1513211965.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:26.003Z,1513211966.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:26.434Z,1513211966.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:26.825Z,1513211966.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:27.207Z,1513211967.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:27.612Z,1513211967.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:28.106Z,1513211968.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:28.395Z,1513211968.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:28.822Z,1513211968.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:29.208Z,1513211969.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:29.711Z,1513211969.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:30.013Z,1513211970.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:30.409Z,1513211970.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:30.807Z,1513211970.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:31.206Z,1513211971.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:31.615Z,1513211971.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:32.020Z,1513211972.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:32.416Z,1513211972.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:32.821Z,1513211972.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:33.196Z,1513211973.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:33.599Z,1513211973.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:33.995Z,1513211973.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:34.392Z,1513211974.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:34.800Z,1513211974.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:35.203Z,1513211975.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:35.565Z,1513211975.565 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T00:39:35.565Z,1513211975.565 [NAL9602] Data Fault, FailCount= 1
2017-12-14T00:39:35.565Z,1513211975.565 [NAL9602](ERROR): Data Fault
2017-12-14T00:39:35.597Z,1513211975.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:35.631Z,1513211975.631 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T00:39:35.966Z,1513211975.966 [NAL9602](INFO): Powering down
2017-12-14T00:39:36.003Z,1513211976.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:36.351Z,1513211976.351 [NAL9602](FAULT): LCB fault:  Software Overcurrent.
2017-12-14T00:39:36.351Z,1513211976.351 [NAL9602] Hardware Fault, FailCount= 1
2017-12-14T00:39:36.352Z,1513211976.352 [NAL9602](ERROR): Hardware Fault
2017-12-14T00:39:36.411Z,1513211976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:36.800Z,1513211976.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:36.813Z,1513211976.813 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T00:39:36.814Z,1513211976.814 [NAL9602] No Fault, FailCount= 1
2017-12-14T00:39:37.194Z,1513211977.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:37.690Z,1513211977.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:37.999Z,1513211977.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:38.403Z,1513211978.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:38.800Z,1513211978.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:39.198Z,1513211979.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:39.602Z,1513211979.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:39.997Z,1513211979.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:40.397Z,1513211980.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:40.852Z,1513211980.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:41.197Z,1513211981.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:41.606Z,1513211981.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:42.000Z,1513211982.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:42.378Z,1513211982.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:42.799Z,1513211982.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:43.186Z,1513211983.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:43.585Z,1513211983.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:44.063Z,1513211984.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:44.417Z,1513211984.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:44.821Z,1513211984.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:45.233Z,1513211985.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:45.639Z,1513211985.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:46.007Z,1513211986.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:46.397Z,1513211986.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:46.807Z,1513211986.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:47.247Z,1513211987.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:47.612Z,1513211987.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:47.999Z,1513211987.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:51.648Z,1513211991.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:51.797Z,1513211991.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:52.129Z,1513211992.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:52.571Z,1513211992.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:52.931Z,1513211992.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:53.386Z,1513211993.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:53.739Z,1513211993.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:54.128Z,1513211994.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:54.535Z,1513211994.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:54.554Z,1513211994.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:39:54.935Z,1513211994.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:55.350Z,1513211995.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:39:55.344Z,1513211995.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:55.738Z,1513211995.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:55.761Z,1513211995.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:39:56.134Z,1513211996.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:56.534Z,1513211996.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:57.010Z,1513211997.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:57.347Z,1513211997.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:57.732Z,1513211997.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:58.131Z,1513211998.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:58.533Z,1513211998.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:59.044Z,1513211999.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:59.324Z,1513211999.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:39:59.726Z,1513211999.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:00.133Z,1513212000.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:00.532Z,1513212000.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:00.997Z,1513212000.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:01.322Z,1513212001.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:01.774Z,1513212001.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:02.125Z,1513212002.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:02.523Z,1513212002.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:03.056Z,1513212003.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:03.383Z,1513212003.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:03.730Z,1513212003.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:04.130Z,1513212004.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:04.534Z,1513212004.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:04.932Z,1513212004.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:05.344Z,1513212005.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:05.746Z,1513212005.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:06.094Z,1513212006.094 [NAL9602](INFO): Powering up NAL9602
2017-12-14T00:40:06.145Z,1513212006.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:06.584Z,1513212006.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:06.933Z,1513212006.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:07.395Z,1513212007.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:07.785Z,1513212007.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:08.132Z,1513212008.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:08.540Z,1513212008.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:08.939Z,1513212008.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:09.384Z,1513212009.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:09.752Z,1513212009.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:10.148Z,1513212010.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:10.546Z,1513212010.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:11.028Z,1513212011.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:11.348Z,1513212011.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:11.742Z,1513212011.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:12.135Z,1513212012.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:12.539Z,1513212012.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:12.995Z,1513212012.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:13.339Z,1513212013.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:13.800Z,1513212013.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:14.145Z,1513212014.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:14.524Z,1513212014.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:15.022Z,1513212015.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:15.335Z,1513212015.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:15.822Z,1513212015.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:16.130Z,1513212016.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:16.558Z,1513212016.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:16.925Z,1513212016.925 [NAL9602](INFO): NAL9602 initialized
2017-12-14T00:40:17.004Z,1513212017.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:17.330Z,1513212017.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:17.771Z,1513212017.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:18.154Z,1513212018.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:18.536Z,1513212018.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:19.058Z,1513212019.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:19.354Z,1513212019.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:19.760Z,1513212019.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:20.164Z,1513212020.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:20.552Z,1513212020.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:20.930Z,1513212020.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:21.363Z,1513212021.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:21.736Z,1513212021.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:22.132Z,1513212022.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:22.552Z,1513212022.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:22.955Z,1513212022.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:23.356Z,1513212023.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:23.741Z,1513212023.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:24.177Z,1513212024.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:24.535Z,1513212024.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:25.018Z,1513212025.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:25.403Z,1513212025.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:25.770Z,1513212025.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:26.163Z,1513212026.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:26.565Z,1513212026.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:27.027Z,1513212027.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:27.341Z,1513212027.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:27.740Z,1513212027.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:28.142Z,1513212028.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:28.594Z,1513212028.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:28.999Z,1513212028.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:29.358Z,1513212029.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:29.736Z,1513212029.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:30.143Z,1513212030.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:30.537Z,1513212030.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:31.002Z,1513212031.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:31.328Z,1513212031.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:31.784Z,1513212031.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:32.174Z,1513212032.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:32.556Z,1513212032.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:33.013Z,1513212033.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:33.347Z,1513212033.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:33.739Z,1513212033.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:34.138Z,1513212034.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:34.542Z,1513212034.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:34.987Z,1513212034.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:35.387Z,1513212035.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:35.740Z,1513212035.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:36.195Z,1513212036.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:36.539Z,1513212036.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:36.990Z,1513212036.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:37.358Z,1513212037.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:37.782Z,1513212037.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:38.192Z,1513212038.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:38.549Z,1513212038.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:39.003Z,1513212039.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:39.332Z,1513212039.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:39.743Z,1513212039.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:40.131Z,1513212040.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:40.540Z,1513212040.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:41.013Z,1513212041.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:41.370Z,1513212041.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:41.754Z,1513212041.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:42.131Z,1513212042.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:42.534Z,1513212042.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:43.001Z,1513212043.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:43.342Z,1513212043.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:43.748Z,1513212043.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:44.149Z,1513212044.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:44.597Z,1513212044.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:45.019Z,1513212045.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:45.346Z,1513212045.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:45.746Z,1513212045.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:46.160Z,1513212046.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:46.554Z,1513212046.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:47.022Z,1513212047.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:47.364Z,1513212047.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:47.791Z,1513212047.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:48.181Z,1513212048.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:51.667Z,1513212051.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:51.811Z,1513212051.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:52.166Z,1513212052.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:52.548Z,1513212052.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:53.023Z,1513212053.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:53.358Z,1513212053.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:53.746Z,1513212053.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:54.156Z,1513212054.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:54.556Z,1513212054.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:55.023Z,1513212055.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:55.364Z,1513212055.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:55.750Z,1513212055.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:56.141Z,1513212056.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:56.555Z,1513212056.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:57.065Z,1513212057.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:57.394Z,1513212057.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:57.794Z,1513212057.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:58.199Z,1513212058.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:58.544Z,1513212058.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:59.023Z,1513212059.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:59.391Z,1513212059.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:59.391Z,1513212059.391 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-12-14T00:40:59.391Z,1513212059.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:40:59.393Z,1513212059.393 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:59.393Z,1513212059.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2017-12-14T00:40:59.393Z,1513212059.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:40:59.395Z,1513212059.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:40:59.395Z,1513212059.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-12-14T00:40:59.395Z,1513212059.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:40:59.443Z,1513212059.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:40:59.444Z,1513212059.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:40:59.444Z,1513212059.444 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:40:59.775Z,1513212059.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:40:59.775Z,1513212059.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-12-14T00:40:59.776Z,1513212059.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:40:59.776Z,1513212059.776 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2017-12-14T00:40:59.776Z,1513212059.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:40:59.776Z,1513212059.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-12-14T00:41:00.189Z,1513212060.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:41:00.190Z,1513212060.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:41:00.190Z,1513212060.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:41:00.190Z,1513212060.190 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:41:00.191Z,1513212060.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:41:00.191Z,1513212060.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:41:00.191Z,1513212060.191 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:41:00.192Z,1513212060.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:41:00.192Z,1513212060.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:41:00.596Z,1513212060.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:00.943Z,1513212060.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:01.347Z,1513212061.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:01.754Z,1513212061.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:02.129Z,1513212062.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:02.636Z,1513212062.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:02.975Z,1513212062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:03.372Z,1513212063.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:03.760Z,1513212063.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:04.150Z,1513212064.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:04.550Z,1513212064.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:04.950Z,1513212064.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:05.360Z,1513212065.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:05.761Z,1513212065.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:06.158Z,1513212066.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:06.563Z,1513212066.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:07.024Z,1513212067.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:07.355Z,1513212067.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:07.731Z,1513212067.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:08.135Z,1513212068.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:08.583Z,1513212068.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:09.072Z,1513212069.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:09.369Z,1513212069.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:09.738Z,1513212069.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:10.138Z,1513212070.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:10.539Z,1513212070.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:11.015Z,1513212071.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:11.339Z,1513212071.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:11.743Z,1513212071.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:12.144Z,1513212072.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:12.556Z,1513212072.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:13.010Z,1513212073.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:13.350Z,1513212073.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:13.796Z,1513212073.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:14.150Z,1513212074.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:14.558Z,1513212074.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:15.049Z,1513212075.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:15.373Z,1513212075.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:15.752Z,1513212075.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:16.150Z,1513212076.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:16.537Z,1513212076.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:16.996Z,1513212076.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:17.363Z,1513212077.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:17.760Z,1513212077.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:18.167Z,1513212078.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:18.574Z,1513212078.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:19.023Z,1513212079.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:19.390Z,1513212079.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:19.753Z,1513212079.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:20.150Z,1513212080.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:20.665Z,1513212080.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:21.079Z,1513212081.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:21.425Z,1513212081.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:21.756Z,1513212081.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:22.167Z,1513212082.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:22.535Z,1513212082.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:23.003Z,1513212083.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:23.400Z,1513212083.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:23.770Z,1513212083.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:24.167Z,1513212084.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:24.540Z,1513212084.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:25.044Z,1513212085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:25.364Z,1513212085.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:25.751Z,1513212085.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:26.181Z,1513212086.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:26.556Z,1513212086.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:27.038Z,1513212087.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:27.376Z,1513212087.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:27.743Z,1513212087.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:28.215Z,1513212088.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:28.586Z,1513212088.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:29.017Z,1513212089.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:29.401Z,1513212089.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:29.773Z,1513212089.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:30.132Z,1513212090.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:30.614Z,1513212090.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:31.004Z,1513212091.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:31.388Z,1513212091.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:31.748Z,1513212091.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:32.143Z,1513212092.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:32.540Z,1513212092.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:32.979Z,1513212092.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:33.477Z,1513212093.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:33.747Z,1513212093.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:34.155Z,1513212094.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:34.544Z,1513212094.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:35.007Z,1513212095.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:35.348Z,1513212095.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:35.751Z,1513212095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:36.147Z,1513212096.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:36.543Z,1513212096.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:37.023Z,1513212097.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:37.354Z,1513212097.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:37.810Z,1513212097.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:38.167Z,1513212098.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:38.560Z,1513212098.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:39.000Z,1513212099.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:39.338Z,1513212099.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:39.764Z,1513212099.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:40.155Z,1513212100.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:40.549Z,1513212100.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:41.015Z,1513212101.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:41.363Z,1513212101.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:41.759Z,1513212101.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:42.156Z,1513212102.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:42.575Z,1513212102.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:43.080Z,1513212103.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:43.377Z,1513212103.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:43.767Z,1513212103.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:44.174Z,1513212104.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:44.540Z,1513212104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:45.012Z,1513212105.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:45.381Z,1513212105.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:45.770Z,1513212105.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:46.155Z,1513212106.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:46.555Z,1513212106.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:46.939Z,1513212106.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:47.378Z,1513212107.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:47.742Z,1513212107.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:48.139Z,1513212108.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:51.694Z,1513212111.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:51.832Z,1513212111.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:52.203Z,1513212112.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:52.608Z,1513212112.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:53.078Z,1513212113.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:53.399Z,1513212113.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:53.816Z,1513212113.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:54.197Z,1513212114.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:54.565Z,1513212114.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:55.038Z,1513212115.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:55.391Z,1513212115.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:55.841Z,1513212115.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:56.198Z,1513212116.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:56.568Z,1513212116.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:57.050Z,1513212117.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:57.413Z,1513212117.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:57.800Z,1513212117.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:58.179Z,1513212118.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:58.573Z,1513212118.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:59.004Z,1513212119.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:59.412Z,1513212119.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:41:59.804Z,1513212119.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:00.183Z,1513212120.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:00.577Z,1513212120.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:01.008Z,1513212121.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:01.395Z,1513212121.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:01.850Z,1513212121.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:02.206Z,1513212122.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:02.565Z,1513212122.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:03.005Z,1513212123.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:03.383Z,1513212123.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:03.801Z,1513212123.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:04.183Z,1513212124.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:04.579Z,1513212124.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:05.046Z,1513212125.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:05.519Z,1513212125.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:05.798Z,1513212125.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:06.207Z,1513212126.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:06.573Z,1513212126.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:07.035Z,1513212127.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:07.404Z,1513212127.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:07.786Z,1513212127.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:08.182Z,1513212128.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:08.607Z,1513212128.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:08.995Z,1513212128.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:09.394Z,1513212129.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:09.783Z,1513212129.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:10.214Z,1513212130.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:10.573Z,1513212130.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:11.043Z,1513212131.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:11.390Z,1513212131.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:11.803Z,1513212131.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:12.195Z,1513212132.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:12.561Z,1513212132.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:12.973Z,1513212132.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:13.368Z,1513212133.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:13.774Z,1513212133.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:14.199Z,1513212134.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:14.585Z,1513212134.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:15.004Z,1513212135.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:15.408Z,1513212135.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:15.803Z,1513212135.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:16.181Z,1513212136.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:16.607Z,1513212136.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:17.018Z,1513212137.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:17.385Z,1513212137.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:17.783Z,1513212137.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:18.251Z,1513212138.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:18.593Z,1513212138.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:19.021Z,1513212139.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:19.382Z,1513212139.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:19.754Z,1513212139.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:20.202Z,1513212140.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:20.590Z,1513212140.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:21.042Z,1513212141.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:21.448Z,1513212141.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:21.790Z,1513212141.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:22.180Z,1513212142.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:22.568Z,1513212142.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:23.045Z,1513212143.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:23.407Z,1513212143.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:23.775Z,1513212143.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:24.189Z,1513212144.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:24.618Z,1513212144.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:25.042Z,1513212145.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:25.387Z,1513212145.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:25.794Z,1513212145.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:26.213Z,1513212146.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:26.566Z,1513212146.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:26.982Z,1513212146.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:27.446Z,1513212147.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:27.887Z,1513212147.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:28.195Z,1513212148.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:28.564Z,1513212148.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:29.019Z,1513212149.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:29.374Z,1513212149.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:29.795Z,1513212149.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:30.168Z,1513212150.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:30.574Z,1513212150.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:31.078Z,1513212151.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:31.406Z,1513212151.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:31.786Z,1513212151.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:32.186Z,1513212152.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:32.587Z,1513212152.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:33.024Z,1513212153.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:33.395Z,1513212153.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:33.775Z,1513212153.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T00:42:33.814Z,1513212153.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:34.183Z,1513212154.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:34.580Z,1513212154.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:35.030Z,1513212155.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:35.397Z,1513212155.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:35.789Z,1513212155.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:36.178Z,1513212156.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:36.578Z,1513212156.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:37.036Z,1513212157.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:37.427Z,1513212157.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:37.791Z,1513212157.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:38.212Z,1513212158.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:38.577Z,1513212158.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:39.043Z,1513212159.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:39.402Z,1513212159.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:39.772Z,1513212159.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:40.183Z,1513212160.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:40.618Z,1513212160.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:41.000Z,1513212161.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:41.401Z,1513212161.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:41.782Z,1513212161.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:42.207Z,1513212162.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:42.561Z,1513212162.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:42.961Z,1513212162.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:43.387Z,1513212163.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:43.835Z,1513212163.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:44.205Z,1513212164.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:44.567Z,1513212164.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:45.041Z,1513212165.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:45.407Z,1513212165.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:45.777Z,1513212165.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:46.168Z,1513212166.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:46.560Z,1513212166.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:47.060Z,1513212167.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:47.403Z,1513212167.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:47.795Z,1513212167.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:48.200Z,1513212168.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:51.919Z,1513212171.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:52.047Z,1513212172.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:52.462Z,1513212172.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:52.844Z,1513212172.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:53.271Z,1513212173.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:53.647Z,1513212173.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:54.012Z,1513212174.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:54.416Z,1513212174.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:54.815Z,1513212174.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:55.217Z,1513212175.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:55.634Z,1513212175.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:56.039Z,1513212176.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:56.422Z,1513212176.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:56.822Z,1513212176.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:57.223Z,1513212177.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:57.610Z,1513212177.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:58.010Z,1513212178.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:58.411Z,1513212178.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:58.811Z,1513212178.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:59.213Z,1513212179.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:42:59.612Z,1513212179.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:00.015Z,1513212180.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:00.416Z,1513212180.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:00.809Z,1513212180.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:01.210Z,1513212181.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:01.651Z,1513212181.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:02.047Z,1513212182.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:02.427Z,1513212182.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:02.865Z,1513212182.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:03.227Z,1513212183.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:03.620Z,1513212183.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:04.022Z,1513212184.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:04.423Z,1513212184.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:04.823Z,1513212184.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:05.224Z,1513212185.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:05.621Z,1513212185.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:06.000Z,1513212186.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:06.423Z,1513212186.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:06.806Z,1513212186.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:07.200Z,1513212187.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:07.624Z,1513212187.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:08.036Z,1513212188.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:08.433Z,1513212188.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:08.804Z,1513212188.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:09.328Z,1513212189.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:09.616Z,1513212189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:10.008Z,1513212190.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:10.434Z,1513212190.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:10.839Z,1513212190.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:11.268Z,1513212191.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:11.617Z,1513212191.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:12.021Z,1513212192.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:12.416Z,1513212192.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:12.816Z,1513212192.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:13.227Z,1513212193.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:13.680Z,1513212193.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:14.031Z,1513212194.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:14.426Z,1513212194.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:14.824Z,1513212194.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:15.223Z,1513212195.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:15.690Z,1513212195.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:16.004Z,1513212196.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:16.427Z,1513212196.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:16.801Z,1513212196.801 [BPC1](ERROR): Failed to receive battery data
2017-12-14T00:43:16.801Z,1513212196.801 [BPC1] Communications Fault, FailCount= 1
2017-12-14T00:43:16.801Z,1513212196.801 [BPC1](ERROR): Communications Fault
2017-12-14T00:43:16.808Z,1513212196.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:16.838Z,1513212196.838 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T00:43:17.235Z,1513212197.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:17.608Z,1513212197.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:18.005Z,1513212198.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:18.050Z,1513212198.050 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:43:18.050Z,1513212198.050 [BPC1] No Fault, FailCount= 1
2017-12-14T00:43:18.467Z,1513212198.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:18.850Z,1513212198.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:19.219Z,1513212199.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:19.624Z,1513212199.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:20.031Z,1513212200.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:20.424Z,1513212200.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:20.812Z,1513212200.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:21.222Z,1513212201.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:21.611Z,1513212201.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:22.019Z,1513212202.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:22.420Z,1513212202.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:22.829Z,1513212202.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:23.329Z,1513212203.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:23.618Z,1513212203.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:24.031Z,1513212204.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:24.399Z,1513212204.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:24.828Z,1513212204.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:25.299Z,1513212205.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:25.616Z,1513212205.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:26.017Z,1513212206.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:26.416Z,1513212206.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:26.847Z,1513212206.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:27.265Z,1513212207.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:27.626Z,1513212207.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:28.015Z,1513212208.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:28.423Z,1513212208.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:28.828Z,1513212208.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:29.227Z,1513212209.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:29.616Z,1513212209.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:30.027Z,1513212210.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:30.415Z,1513212210.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:30.814Z,1513212210.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:31.214Z,1513212211.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:31.620Z,1513212211.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:32.064Z,1513212212.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:32.427Z,1513212212.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:32.808Z,1513212212.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:33.285Z,1513212213.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:33.621Z,1513212213.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:34.020Z,1513212214.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:34.427Z,1513212214.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:34.832Z,1513212214.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:35.272Z,1513212215.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:35.622Z,1513212215.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:36.020Z,1513212216.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:36.420Z,1513212216.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:36.822Z,1513212216.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:37.224Z,1513212217.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:37.671Z,1513212217.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:38.024Z,1513212218.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:38.471Z,1513212218.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:38.839Z,1513212218.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:39.208Z,1513212219.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:39.646Z,1513212219.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:40.007Z,1513212220.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:40.416Z,1513212220.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:40.815Z,1513212220.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:41.223Z,1513212221.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:41.655Z,1513212221.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:42.014Z,1513212222.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:42.410Z,1513212222.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:42.809Z,1513212222.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:43.211Z,1513212223.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:43.622Z,1513212223.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:44.023Z,1513212224.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:44.428Z,1513212224.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:44.828Z,1513212224.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:45.211Z,1513212225.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:45.622Z,1513212225.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:46.015Z,1513212226.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:46.431Z,1513212226.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:46.823Z,1513212226.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:47.227Z,1513212227.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:47.627Z,1513212227.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:48.079Z,1513212228.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:48.082Z,1513212228.082 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T00:43:48.083Z,1513212228.083 [Default:CheckIn:C.Wait] Stopped
2017-12-14T00:43:48.083Z,1513212228.083 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T00:43:48.083Z,1513212228.083 [Default:CheckIn:D] Running Loop=1
2017-12-14T00:43:48.413Z,1513212228.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:48.418Z,1513212228.418 [Default:CheckIn:D] Stopped
2017-12-14T00:43:48.418Z,1513212228.418 [Default:CheckIn:E] Running Loop=1
2017-12-14T00:43:51.924Z,1513212231.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:51.928Z,1513212231.928 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.550432 min 
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn:E] Stopped
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn] Stopped
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn](INFO): Running loop #2
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn] Running Loop=2
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T00:43:51.930Z,1513212231.930 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T00:43:52.067Z,1513212232.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:52.468Z,1513212232.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:52.865Z,1513212232.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:53.322Z,1513212233.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:53.667Z,1513212233.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:54.068Z,1513212234.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:54.450Z,1513212234.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:54.859Z,1513212234.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:55.256Z,1513212235.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:55.661Z,1513212235.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:56.068Z,1513212236.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:56.470Z,1513212236.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:56.863Z,1513212236.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:57.247Z,1513212237.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:57.696Z,1513212237.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:58.046Z,1513212238.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:58.478Z,1513212238.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:58.491Z,1513212238.491 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T00:43:58.491Z,1513212238.491 [DropWeight] No Fault, FailCount= 1
2017-12-14T00:43:58.967Z,1513212238.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:59.267Z,1513212239.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:43:59.654Z,1513212239.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:00.067Z,1513212240.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:00.447Z,1513212240.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:00.447Z,1513212240.447 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2017-12-14T00:44:00.447Z,1513212240.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:44:00.449Z,1513212240.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:00.449Z,1513212240.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2017-12-14T00:44:00.449Z,1513212240.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:44:00.451Z,1513212240.451 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:00.451Z,1513212240.451 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-12-14T00:44:00.451Z,1513212240.451 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:44:00.463Z,1513212240.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:44:00.463Z,1513212240.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:44:00.463Z,1513212240.463 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:44:01.019Z,1513212241.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:44:01.019Z,1513212241.019 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2017-12-14T00:44:01.019Z,1513212241.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:44:01.020Z,1513212241.020 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2017-12-14T00:44:01.020Z,1513212241.020 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:44:01.020Z,1513212241.020 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-12-14T00:44:01.279Z,1513212241.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:44:01.280Z,1513212241.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:44:01.280Z,1513212241.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:44:01.281Z,1513212241.281 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:44:01.281Z,1513212241.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:44:01.281Z,1513212241.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:44:01.282Z,1513212241.282 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:44:01.282Z,1513212241.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:44:01.283Z,1513212241.283 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:44:01.649Z,1513212241.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:02.086Z,1513212242.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:02.473Z,1513212242.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:02.843Z,1513212242.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:03.251Z,1513212243.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:03.646Z,1513212243.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:04.048Z,1513212244.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:04.470Z,1513212244.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:04.872Z,1513212244.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:05.330Z,1513212245.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:05.654Z,1513212245.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:06.052Z,1513212246.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:06.444Z,1513212246.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:06.847Z,1513212246.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:07.350Z,1513212247.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:07.667Z,1513212247.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:08.061Z,1513212248.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:08.463Z,1513212248.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:08.844Z,1513212248.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:09.250Z,1513212249.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:09.651Z,1513212249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:10.036Z,1513212250.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:10.513Z,1513212250.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:10.872Z,1513212250.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:11.271Z,1513212251.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:11.647Z,1513212251.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:12.048Z,1513212252.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:12.446Z,1513212252.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:12.852Z,1513212252.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:13.251Z,1513212253.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:13.666Z,1513212253.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:14.061Z,1513212254.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:14.461Z,1513212254.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:14.865Z,1513212254.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:15.242Z,1513212255.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:15.667Z,1513212255.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:16.071Z,1513212256.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:16.476Z,1513212256.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:16.851Z,1513212256.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:17.275Z,1513212257.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:17.648Z,1513212257.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:18.054Z,1513212258.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:18.443Z,1513212258.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:18.848Z,1513212258.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:19.344Z,1513212259.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:19.673Z,1513212259.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:20.066Z,1513212260.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:20.474Z,1513212260.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:20.846Z,1513212260.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:21.367Z,1513212261.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:21.649Z,1513212261.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:22.047Z,1513212262.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:22.488Z,1513212262.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:22.851Z,1513212262.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:23.296Z,1513212263.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:23.671Z,1513212263.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:24.055Z,1513212264.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:24.494Z,1513212264.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:24.855Z,1513212264.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:25.242Z,1513212265.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:25.664Z,1513212265.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:26.066Z,1513212266.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:26.515Z,1513212266.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:26.867Z,1513212266.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:27.246Z,1513212267.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:27.647Z,1513212267.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:28.044Z,1513212268.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:28.471Z,1513212268.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:28.873Z,1513212268.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:29.248Z,1513212269.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:29.686Z,1513212269.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:30.047Z,1513212270.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:30.448Z,1513212270.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:30.851Z,1513212270.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:31.247Z,1513212271.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:31.655Z,1513212271.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:32.055Z,1513212272.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:32.463Z,1513212272.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:32.938Z,1513212272.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:33.313Z,1513212273.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:33.649Z,1513212273.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:34.051Z,1513212274.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:34.456Z,1513212274.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:34.866Z,1513212274.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:35.328Z,1513212275.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:35.647Z,1513212275.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:36.080Z,1513212276.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:36.445Z,1513212276.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:36.846Z,1513212276.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:37.250Z,1513212277.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:37.666Z,1513212277.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:38.063Z,1513212278.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:38.467Z,1513212278.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:38.864Z,1513212278.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:39.287Z,1513212279.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:39.647Z,1513212279.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:40.048Z,1513212280.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:40.474Z,1513212280.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:40.876Z,1513212280.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:41.264Z,1513212281.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:41.657Z,1513212281.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:42.048Z,1513212282.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:42.486Z,1513212282.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:42.854Z,1513212282.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:43.266Z,1513212283.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:43.695Z,1513212283.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:44.067Z,1513212284.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:44.469Z,1513212284.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:44.882Z,1513212284.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:45.250Z,1513212285.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:45.648Z,1513212285.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:46.110Z,1513212286.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:46.462Z,1513212286.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:46.887Z,1513212286.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:47.329Z,1513212287.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:47.650Z,1513212287.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:48.048Z,1513212288.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:48.448Z,1513212288.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:51.994Z,1513212291.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:52.138Z,1513212292.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:52.471Z,1513212292.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:52.885Z,1513212292.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:53.295Z,1513212293.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:53.662Z,1513212293.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:54.062Z,1513212294.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:54.470Z,1513212294.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:54.864Z,1513212294.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:55.288Z,1513212295.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:55.690Z,1513212295.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:56.079Z,1513212296.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:56.478Z,1513212296.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:56.874Z,1513212296.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:57.272Z,1513212297.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:57.663Z,1513212297.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:58.055Z,1513212298.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:58.544Z,1513212298.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:58.895Z,1513212298.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:59.295Z,1513212299.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:44:59.690Z,1513212299.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:00.062Z,1513212300.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:00.455Z,1513212300.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:00.861Z,1513212300.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:01.343Z,1513212301.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:01.672Z,1513212301.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:02.072Z,1513212302.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:02.473Z,1513212302.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:02.872Z,1513212302.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:03.325Z,1513212303.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:03.666Z,1513212303.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:04.119Z,1513212304.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:04.481Z,1513212304.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:04.880Z,1513212304.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:05.264Z,1513212305.264 [BPC1](ERROR): Failed to parse message.
2017-12-14T00:45:05.264Z,1513212305.264 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T00:45:05.264Z,1513212305.264 [BPC1] Data Fault, FailCount= 1
2017-12-14T00:45:05.264Z,1513212305.264 [BPC1](ERROR): Data Fault
2017-12-14T00:45:05.303Z,1513212305.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:05.343Z,1513212305.343 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T00:45:05.666Z,1513212305.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:06.071Z,1513212306.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:06.467Z,1513212306.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:06.480Z,1513212306.480 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:45:06.480Z,1513212306.480 [BPC1] No Fault, FailCount= 1
2017-12-14T00:45:06.956Z,1513212306.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:07.271Z,1513212307.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:07.676Z,1513212307.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:08.079Z,1513212308.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:08.550Z,1513212308.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:08.867Z,1513212308.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:09.274Z,1513212309.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:09.666Z,1513212309.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:10.072Z,1513212310.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:10.478Z,1513212310.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:10.875Z,1513212310.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:11.272Z,1513212311.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:11.688Z,1513212311.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:12.072Z,1513212312.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:12.471Z,1513212312.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:12.870Z,1513212312.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:13.268Z,1513212313.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:13.683Z,1513212313.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:14.087Z,1513212314.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:14.468Z,1513212314.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:15.068Z,1513212315.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:15.343Z,1513212315.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:15.663Z,1513212315.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:16.067Z,1513212316.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:16.489Z,1513212316.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:16.875Z,1513212316.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:17.352Z,1513212317.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:17.671Z,1513212317.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:18.064Z,1513212318.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:18.472Z,1513212318.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:18.873Z,1513212318.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:19.272Z,1513212319.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:19.688Z,1513212319.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:20.091Z,1513212320.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:20.488Z,1513212320.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:20.867Z,1513212320.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:21.295Z,1513212321.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:21.658Z,1513212321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:22.070Z,1513212322.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:22.479Z,1513212322.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:22.878Z,1513212322.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:23.280Z,1513212323.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:23.677Z,1513212323.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:24.078Z,1513212324.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:24.455Z,1513212324.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:24.983Z,1513212324.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:25.280Z,1513212325.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:25.703Z,1513212325.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:26.079Z,1513212326.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:26.473Z,1513212326.473 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T00:45:26.474Z,1513212326.474 [BPC1] Data Fault, FailCount= 2
2017-12-14T00:45:26.474Z,1513212326.474 [BPC1](ERROR): Data Fault
2017-12-14T00:45:26.488Z,1513212326.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:26.566Z,1513212326.566 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T00:45:26.862Z,1513212326.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:27.271Z,1513212327.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:27.663Z,1513212327.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:27.676Z,1513212327.676 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:45:27.676Z,1513212327.676 [BPC1] No Fault, FailCount= 2
2017-12-14T00:45:28.146Z,1513212328.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:28.471Z,1513212328.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:28.876Z,1513212328.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:29.366Z,1513212329.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:29.664Z,1513212329.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:30.071Z,1513212330.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:30.458Z,1513212330.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:30.871Z,1513212330.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:31.345Z,1513212331.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:31.678Z,1513212331.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:32.081Z,1513212332.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:32.480Z,1513212332.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:32.867Z,1513212332.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:33.267Z,1513212333.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:33.667Z,1513212333.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:34.064Z,1513212334.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:34.469Z,1513212334.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:34.879Z,1513212334.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:35.283Z,1513212335.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:35.672Z,1513212335.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:36.073Z,1513212336.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:36.487Z,1513212336.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:36.874Z,1513212336.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:37.274Z,1513212337.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:37.695Z,1513212337.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:38.083Z,1513212338.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:38.477Z,1513212338.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:38.878Z,1513212338.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:39.263Z,1513212339.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:39.690Z,1513212339.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:40.058Z,1513212340.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:40.488Z,1513212340.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:40.893Z,1513212340.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:41.284Z,1513212341.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:41.670Z,1513212341.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:42.083Z,1513212342.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:42.468Z,1513212342.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:42.864Z,1513212342.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:43.315Z,1513212343.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:43.670Z,1513212343.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:44.072Z,1513212344.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:44.474Z,1513212344.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:44.863Z,1513212344.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:45.328Z,1513212345.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:45.663Z,1513212345.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:46.072Z,1513212346.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:46.475Z,1513212346.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:46.871Z,1513212346.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:47.314Z,1513212347.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:47.672Z,1513212347.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:48.070Z,1513212348.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:48.475Z,1513212348.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:51.991Z,1513212351.991 [BPC1](ERROR): Failed to receive battery data
2017-12-14T00:45:51.991Z,1513212351.991 [BPC1] Communications Fault, FailCount= 3
2017-12-14T00:45:51.991Z,1513212351.991 [BPC1](ERROR): Communications Fault
2017-12-14T00:45:51.998Z,1513212351.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:52.035Z,1513212352.035 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T00:45:52.135Z,1513212352.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:52.504Z,1513212352.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:52.995Z,1513212352.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:53.008Z,1513212353.008 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:45:53.008Z,1513212353.008 [BPC1] No Fault, FailCount= 3
2017-12-14T00:45:53.363Z,1513212353.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:53.734Z,1513212353.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:54.095Z,1513212354.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:54.495Z,1513212354.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:54.897Z,1513212354.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:55.305Z,1513212355.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:55.706Z,1513212355.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:56.108Z,1513212356.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:56.508Z,1513212356.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:56.950Z,1513212356.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:57.346Z,1513212357.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:57.698Z,1513212357.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:58.096Z,1513212358.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:58.504Z,1513212358.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:58.905Z,1513212358.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:59.350Z,1513212359.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:45:59.707Z,1513212359.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:00.166Z,1513212360.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:00.491Z,1513212360.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:00.962Z,1513212360.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:01.294Z,1513212361.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:01.731Z,1513212361.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:02.100Z,1513212362.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:02.506Z,1513212362.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:02.965Z,1513212362.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:03.341Z,1513212363.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:03.704Z,1513212363.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:04.107Z,1513212364.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:04.511Z,1513212364.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:04.986Z,1513212364.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:05.323Z,1513212365.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:05.700Z,1513212365.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:06.100Z,1513212366.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:06.512Z,1513212366.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:06.972Z,1513212366.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:07.309Z,1513212367.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:07.715Z,1513212367.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:08.114Z,1513212368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:08.515Z,1513212368.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:08.911Z,1513212368.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:09.292Z,1513212369.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:09.768Z,1513212369.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:10.105Z,1513212370.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:10.507Z,1513212370.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:10.912Z,1513212370.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:11.352Z,1513212371.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:11.705Z,1513212371.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:12.097Z,1513212372.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:12.539Z,1513212372.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:12.951Z,1513212372.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:13.354Z,1513212373.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:13.758Z,1513212373.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:14.119Z,1513212374.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:14.539Z,1513212374.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:14.954Z,1513212374.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:15.293Z,1513212375.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:15.699Z,1513212375.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:16.133Z,1513212376.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:16.505Z,1513212376.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:17.008Z,1513212377.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:17.307Z,1513212377.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:17.705Z,1513212377.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:18.099Z,1513212378.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:18.499Z,1513212378.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:18.956Z,1513212378.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:19.353Z,1513212379.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:19.703Z,1513212379.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:20.133Z,1513212380.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:20.515Z,1513212380.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:20.990Z,1513212380.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:21.313Z,1513212381.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:21.750Z,1513212381.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:22.121Z,1513212382.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:22.577Z,1513212382.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:23.010Z,1513212383.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:23.315Z,1513212383.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:23.706Z,1513212383.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:24.148Z,1513212384.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:24.512Z,1513212384.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:24.932Z,1513212384.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:25.394Z,1513212385.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:25.726Z,1513212385.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:26.139Z,1513212386.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:26.540Z,1513212386.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:26.905Z,1513212386.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:27.370Z,1513212387.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:27.726Z,1513212387.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:28.106Z,1513212388.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:28.528Z,1513212388.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:28.980Z,1513212388.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:29.326Z,1513212389.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:29.691Z,1513212389.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:30.107Z,1513212390.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:30.499Z,1513212390.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:30.939Z,1513212390.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:31.323Z,1513212391.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:31.720Z,1513212391.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:32.174Z,1513212392.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:32.578Z,1513212392.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:33.043Z,1513212393.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:33.352Z,1513212393.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:33.782Z,1513212393.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:34.151Z,1513212394.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:34.544Z,1513212394.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:35.068Z,1513212395.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:35.343Z,1513212395.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:35.730Z,1513212395.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:36.134Z,1513212396.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:36.494Z,1513212396.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:36.938Z,1513212396.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:37.295Z,1513212397.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:37.710Z,1513212397.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:38.114Z,1513212398.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:38.514Z,1513212398.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:38.903Z,1513212398.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:39.338Z,1513212399.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:39.701Z,1513212399.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:40.102Z,1513212400.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:40.510Z,1513212400.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:40.910Z,1513212400.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:41.359Z,1513212401.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:41.698Z,1513212401.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:42.098Z,1513212402.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:42.502Z,1513212402.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:42.961Z,1513212402.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:43.290Z,1513212403.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:43.720Z,1513212403.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:44.114Z,1513212404.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:44.511Z,1513212404.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:44.969Z,1513212404.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:45.366Z,1513212405.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:45.703Z,1513212405.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:46.099Z,1513212406.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:46.501Z,1513212406.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:46.975Z,1513212406.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:47.315Z,1513212407.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:47.704Z,1513212407.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:48.098Z,1513212408.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:48.538Z,1513212408.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:52.215Z,1513212412.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:52.340Z,1513212412.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:52.714Z,1513212412.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:53.123Z,1513212413.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:53.518Z,1513212413.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:53.907Z,1513212413.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:54.301Z,1513212414.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:54.699Z,1513212414.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:55.106Z,1513212415.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:55.512Z,1513212415.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:55.914Z,1513212415.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:56.451Z,1513212416.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:56.705Z,1513212416.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:57.105Z,1513212417.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:57.527Z,1513212417.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:57.910Z,1513212417.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:58.339Z,1513212418.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:58.699Z,1513212418.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:59.177Z,1513212419.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:59.531Z,1513212419.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:46:59.905Z,1513212419.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:00.307Z,1513212420.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:00.703Z,1513212420.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:01.194Z,1513212421.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:01.509Z,1513212421.509 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:01.509Z,1513212421.509 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2017-12-14T00:47:01.509Z,1513212421.509 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:47:01.511Z,1513212421.511 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:01.511Z,1513212421.511 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2017-12-14T00:47:01.511Z,1513212421.511 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:47:01.525Z,1513212421.525 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:01.525Z,1513212421.525 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-12-14T00:47:01.525Z,1513212421.525 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:47:01.550Z,1513212421.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:47:01.550Z,1513212421.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:47:01.551Z,1513212421.551 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:47:01.919Z,1513212421.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:47:01.919Z,1513212421.919 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2017-12-14T00:47:01.920Z,1513212421.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:47:01.920Z,1513212421.920 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2017-12-14T00:47:01.920Z,1513212421.920 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:47:01.920Z,1513212421.920 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-12-14T00:47:02.307Z,1513212422.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:47:02.308Z,1513212422.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:47:02.308Z,1513212422.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:47:02.309Z,1513212422.309 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:47:02.309Z,1513212422.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:47:02.309Z,1513212422.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:47:02.310Z,1513212422.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:47:02.310Z,1513212422.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:47:02.310Z,1513212422.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:47:02.710Z,1513212422.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:03.100Z,1513212423.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:03.555Z,1513212423.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:03.904Z,1513212423.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:04.355Z,1513212424.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:04.711Z,1513212424.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:05.112Z,1513212425.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:05.512Z,1513212425.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:05.906Z,1513212425.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:06.306Z,1513212426.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:06.711Z,1513212426.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:07.098Z,1513212427.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:07.548Z,1513212427.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:07.919Z,1513212427.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:08.323Z,1513212428.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:08.711Z,1513212428.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:09.105Z,1513212429.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:09.492Z,1513212429.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:09.894Z,1513212429.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:10.320Z,1513212430.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:10.762Z,1513212430.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:11.128Z,1513212431.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:11.508Z,1513212431.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:11.903Z,1513212431.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:12.299Z,1513212432.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:12.698Z,1513212432.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:13.102Z,1513212433.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:13.553Z,1513212433.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:13.942Z,1513212433.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:14.303Z,1513212434.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:14.700Z,1513212434.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:15.103Z,1513212435.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:15.505Z,1513212435.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:15.904Z,1513212435.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:16.306Z,1513212436.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:16.712Z,1513212436.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:17.124Z,1513212437.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:17.524Z,1513212437.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:17.930Z,1513212437.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:18.305Z,1513212438.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:18.704Z,1513212438.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:19.106Z,1513212439.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:19.560Z,1513212439.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:19.918Z,1513212439.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:20.339Z,1513212440.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:20.699Z,1513212440.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:21.147Z,1513212441.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:21.501Z,1513212441.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:21.907Z,1513212441.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:22.300Z,1513212442.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:22.506Z,1513212442.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:22.709Z,1513212442.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:23.117Z,1513212443.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:23.302Z,1513212443.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:23.560Z,1513212443.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:23.709Z,1513212443.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:23.905Z,1513212443.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:24.327Z,1513212444.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:24.505Z,1513212444.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:24.704Z,1513212444.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:25.104Z,1513212445.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:25.301Z,1513212445.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:25.526Z,1513212445.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:25.705Z,1513212445.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:47:25.917Z,1513212445.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:26.318Z,1513212446.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:26.751Z,1513212446.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:27.110Z,1513212447.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:27.494Z,1513212447.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:27.968Z,1513212447.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:28.292Z,1513212448.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:28.726Z,1513212448.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:29.114Z,1513212449.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:29.561Z,1513212449.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:29.940Z,1513212449.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:30.299Z,1513212450.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:30.747Z,1513212450.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:31.103Z,1513212451.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:31.519Z,1513212451.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:31.919Z,1513212451.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:32.315Z,1513212452.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:32.703Z,1513212452.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:33.112Z,1513212453.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:33.512Z,1513212453.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:33.905Z,1513212453.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:34.306Z,1513212454.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:34.711Z,1513212454.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:35.113Z,1513212455.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:35.515Z,1513212455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:35.906Z,1513212455.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:36.360Z,1513212456.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:36.711Z,1513212456.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:37.105Z,1513212457.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:37.521Z,1513212457.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:37.919Z,1513212457.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:38.322Z,1513212458.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:38.705Z,1513212458.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:39.105Z,1513212459.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:39.554Z,1513212459.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:39.916Z,1513212459.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:40.327Z,1513212460.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:40.724Z,1513212460.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:41.120Z,1513212461.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:41.547Z,1513212461.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:41.920Z,1513212461.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:42.298Z,1513212462.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:42.787Z,1513212462.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:43.103Z,1513212463.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:43.543Z,1513212463.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:43.924Z,1513212463.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:44.325Z,1513212464.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:44.698Z,1513212464.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:45.104Z,1513212465.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:45.505Z,1513212465.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:45.960Z,1513212465.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:46.312Z,1513212466.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:46.726Z,1513212466.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:47.127Z,1513212467.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:47.543Z,1513212467.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:47.933Z,1513212467.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:48.300Z,1513212468.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:48.711Z,1513212468.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:52.412Z,1513212472.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:52.563Z,1513212472.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:52.989Z,1513212472.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:53.328Z,1513212473.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:53.716Z,1513212473.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:54.110Z,1513212474.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:54.529Z,1513212474.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:54.976Z,1513212474.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:55.302Z,1513212475.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:55.732Z,1513212475.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:56.128Z,1513212476.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:56.530Z,1513212476.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:56.997Z,1513212476.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:57.319Z,1513212477.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:57.713Z,1513212477.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:58.111Z,1513212478.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:58.514Z,1513212478.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:58.984Z,1513212478.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:59.354Z,1513212479.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:47:59.715Z,1513212479.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:00.108Z,1513212480.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:00.516Z,1513212480.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:00.910Z,1513212480.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:01.302Z,1513212481.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:01.727Z,1513212481.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:02.126Z,1513212482.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:02.548Z,1513212482.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:02.915Z,1513212482.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:03.391Z,1513212483.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:03.712Z,1513212483.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:04.128Z,1513212484.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:04.525Z,1513212484.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:04.927Z,1513212484.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:05.417Z,1513212485.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:05.756Z,1513212485.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:06.127Z,1513212486.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:06.518Z,1513212486.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:07.013Z,1513212487.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:07.317Z,1513212487.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:07.715Z,1513212487.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:08.127Z,1513212488.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:08.535Z,1513212488.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:09.024Z,1513212489.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:09.327Z,1513212489.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:09.709Z,1513212489.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:10.116Z,1513212490.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:10.517Z,1513212490.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:10.978Z,1513212490.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:11.331Z,1513212491.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:11.703Z,1513212491.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:12.102Z,1513212492.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:12.502Z,1513212492.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:12.979Z,1513212492.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:13.311Z,1513212493.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:13.737Z,1513212493.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:14.155Z,1513212494.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:14.512Z,1513212494.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:14.915Z,1513212494.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:15.357Z,1513212495.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:15.720Z,1513212495.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:16.106Z,1513212496.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:16.516Z,1513212496.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:16.922Z,1513212496.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:17.362Z,1513212497.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:17.718Z,1513212497.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:18.124Z,1513212498.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:18.570Z,1513212498.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:18.917Z,1513212498.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:19.339Z,1513212499.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:19.747Z,1513212499.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:20.128Z,1513212500.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:20.531Z,1513212500.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:20.977Z,1513212500.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:21.308Z,1513212501.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:21.747Z,1513212501.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:22.115Z,1513212502.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:22.516Z,1513212502.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:22.999Z,1513212502.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:23.320Z,1513212503.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:23.715Z,1513212503.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:24.118Z,1513212504.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:24.512Z,1513212504.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:25.009Z,1513212505.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:25.313Z,1513212505.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:25.744Z,1513212505.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:26.126Z,1513212506.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:26.528Z,1513212506.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:27.012Z,1513212507.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:27.318Z,1513212507.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:27.751Z,1513212507.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:28.101Z,1513212508.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:28.523Z,1513212508.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:28.927Z,1513212508.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:29.333Z,1513212509.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:29.708Z,1513212509.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:30.102Z,1513212510.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:30.503Z,1513212510.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:30.908Z,1513212510.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:31.399Z,1513212511.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:31.720Z,1513212511.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:32.118Z,1513212512.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:32.518Z,1513212512.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:32.915Z,1513212512.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:33.353Z,1513212513.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:33.708Z,1513212513.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:34.124Z,1513212514.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:34.523Z,1513212514.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:34.991Z,1513212514.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:35.329Z,1513212515.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:35.716Z,1513212515.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:36.146Z,1513212516.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:36.507Z,1513212516.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:36.988Z,1513212516.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:37.309Z,1513212517.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:37.811Z,1513212517.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:38.123Z,1513212518.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:38.521Z,1513212518.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:39.033Z,1513212519.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:39.299Z,1513212519.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:39.726Z,1513212519.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:40.104Z,1513212520.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:40.525Z,1513212520.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:41.006Z,1513212521.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:41.314Z,1513212521.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:41.706Z,1513212521.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:42.106Z,1513212522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:42.512Z,1513212522.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:42.913Z,1513212522.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:43.320Z,1513212523.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:43.722Z,1513212523.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:44.124Z,1513212524.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:44.517Z,1513212524.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:44.915Z,1513212524.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:45.340Z,1513212525.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:45.719Z,1513212525.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:46.119Z,1513212526.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:46.525Z,1513212526.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:46.920Z,1513212526.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:47.424Z,1513212527.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:47.723Z,1513212527.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:48.172Z,1513212528.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:48.506Z,1513212528.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:48.993Z,1513212528.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:52.387Z,1513212532.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:52.391Z,1513212532.391 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T00:43:51.9Z
2017-12-14T00:48:52.391Z,1513212532.391 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T00:48:52.391Z,1513212532.391 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T00:48:52.539Z,1513212532.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:53.347Z,1513212533.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:53.499Z,1513212533.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:53.824Z,1513212533.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:54.223Z,1513212534.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:57.704Z,1513212537.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:57.731Z,1513212537.731 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T00:48:57.832Z,1513212537.832 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0008.lzma
2017-12-14T00:48:57.909Z,1513212537.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:58.238Z,1513212538.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:58.925Z,1513212538.925 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0008.lzma.bak
2017-12-14T00:48:58.925Z,1513212538.925 [DataOverHttps](INFO): SBD MOMSN=5437272
2017-12-14T00:48:58.996Z,1513212538.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:48:59.970Z,1513212539.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:00.106Z,1513212540.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:03.570Z,1513212543.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:03.703Z,1513212543.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:04.064Z,1513212544.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:04.461Z,1513212544.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:04.858Z,1513212544.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:05.248Z,1513212545.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:08.690Z,1513212548.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:08.765Z,1513212548.765 [DataOverHttps](INFO): Sending 200 bytes from file Logs/20171214T002839/Express0009.lzma
2017-12-14T00:49:08.839Z,1513212548.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:09.211Z,1513212549.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:09.543Z,1513212549.543 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0009.lzma.bak
2017-12-14T00:49:09.543Z,1513212549.543 [DataOverHttps](INFO): SBD MOMSN=5437274
2017-12-14T00:49:09.627Z,1513212549.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:10.731Z,1513212550.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:10.736Z,1513212550.736 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T00:49:10.736Z,1513212550.736 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T00:49:10.736Z,1513212550.736 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T00:49:10.859Z,1513212550.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:14.249Z,1513212554.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:14.390Z,1513212554.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:14.751Z,1513212554.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:15.151Z,1513212555.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:15.599Z,1513212555.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:15.960Z,1513212555.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:16.316Z,1513212556.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:16.712Z,1513212556.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:17.151Z,1513212557.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:17.535Z,1513212557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:17.963Z,1513212557.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:18.332Z,1513212558.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:18.734Z,1513212558.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:19.116Z,1513212559.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:19.523Z,1513212559.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:19.920Z,1513212559.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:20.315Z,1513212560.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:20.747Z,1513212560.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:21.124Z,1513212561.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:21.546Z,1513212561.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:21.915Z,1513212561.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:22.352Z,1513212562.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:22.731Z,1513212562.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:23.126Z,1513212563.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:23.525Z,1513212563.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:23.948Z,1513212563.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:24.326Z,1513212564.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:24.727Z,1513212564.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:25.118Z,1513212565.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:25.571Z,1513212565.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:25.919Z,1513212565.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:26.354Z,1513212566.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:26.762Z,1513212566.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:27.124Z,1513212567.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:27.552Z,1513212567.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:27.922Z,1513212567.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:28.329Z,1513212568.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:28.775Z,1513212568.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:29.134Z,1513212569.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:29.527Z,1513212569.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:29.921Z,1513212569.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:30.320Z,1513212570.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:30.739Z,1513212570.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:31.305Z,1513212571.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:31.532Z,1513212571.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:31.960Z,1513212571.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:32.321Z,1513212572.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:32.721Z,1513212572.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:33.179Z,1513212573.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:33.536Z,1513212573.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:33.943Z,1513212573.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:34.353Z,1513212574.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:34.723Z,1513212574.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:35.195Z,1513212575.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:35.523Z,1513212575.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:35.920Z,1513212575.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:36.320Z,1513212576.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:36.754Z,1513212576.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:37.151Z,1513212577.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:37.528Z,1513212577.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:37.971Z,1513212577.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:38.455Z,1513212578.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:38.733Z,1513212578.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:39.155Z,1513212579.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:39.575Z,1513212579.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:39.977Z,1513212579.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:40.335Z,1513212580.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:40.723Z,1513212580.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:41.121Z,1513212581.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:41.525Z,1513212581.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:41.920Z,1513212581.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:42.320Z,1513212582.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:42.723Z,1513212582.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:43.129Z,1513212583.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:43.536Z,1513212583.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:43.923Z,1513212583.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:44.357Z,1513212584.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:44.723Z,1513212584.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:45.119Z,1513212585.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:45.544Z,1513212585.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:45.951Z,1513212585.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:46.328Z,1513212586.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:46.724Z,1513212586.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:47.159Z,1513212587.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:47.519Z,1513212587.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:47.920Z,1513212587.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:48.354Z,1513212588.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:48.728Z,1513212588.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:49.128Z,1513212589.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:49.527Z,1513212589.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:49.923Z,1513212589.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:50.323Z,1513212590.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:50.720Z,1513212590.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:51.181Z,1513212591.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:51.535Z,1513212591.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:51.936Z,1513212591.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:52.332Z,1513212592.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:52.727Z,1513212592.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:53.127Z,1513212593.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:53.522Z,1513212593.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:53.923Z,1513212593.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:54.390Z,1513212594.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:54.725Z,1513212594.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:55.136Z,1513212595.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:55.536Z,1513212595.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:55.923Z,1513212595.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:56.346Z,1513212596.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:56.722Z,1513212596.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:57.121Z,1513212597.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:57.595Z,1513212597.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:57.940Z,1513212597.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:58.339Z,1513212598.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:58.721Z,1513212598.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:59.135Z,1513212599.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:59.529Z,1513212599.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:49:59.923Z,1513212599.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:00.348Z,1513212600.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:00.802Z,1513212600.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:01.144Z,1513212601.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:01.544Z,1513212601.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:01.948Z,1513212601.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:02.316Z,1513212602.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:02.316Z,1513212602.316 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2017-12-14T00:50:02.316Z,1513212602.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:50:02.319Z,1513212602.319 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:02.319Z,1513212602.319 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2017-12-14T00:50:02.319Z,1513212602.319 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:50:02.321Z,1513212602.321 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:02.322Z,1513212602.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-12-14T00:50:02.322Z,1513212602.322 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:50:02.345Z,1513212602.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:50:02.346Z,1513212602.346 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:50:02.346Z,1513212602.346 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:50:02.765Z,1513212602.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:50:02.765Z,1513212602.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2017-12-14T00:50:02.766Z,1513212602.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:50:02.766Z,1513212602.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2017-12-14T00:50:02.766Z,1513212602.766 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:50:02.766Z,1513212602.766 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-12-14T00:50:03.129Z,1513212603.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:50:03.130Z,1513212603.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:50:03.130Z,1513212603.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:50:03.130Z,1513212603.130 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:50:03.131Z,1513212603.131 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:50:03.131Z,1513212603.131 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:50:03.131Z,1513212603.131 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:50:03.132Z,1513212603.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:50:03.132Z,1513212603.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:50:03.532Z,1513212603.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:03.939Z,1513212603.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:04.331Z,1513212604.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:04.724Z,1513212604.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:05.140Z,1513212605.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:05.523Z,1513212605.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:05.924Z,1513212605.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:06.319Z,1513212606.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:06.732Z,1513212606.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:07.173Z,1513212607.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:07.532Z,1513212607.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:07.913Z,1513212607.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:08.339Z,1513212608.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:08.719Z,1513212608.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:09.120Z,1513212609.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:09.543Z,1513212609.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:09.941Z,1513212609.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:10.394Z,1513212610.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:10.723Z,1513212610.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:11.158Z,1513212611.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:14.560Z,1513212614.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:14.671Z,1513212614.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:15.074Z,1513212615.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:15.499Z,1513212615.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:15.901Z,1513212615.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:16.269Z,1513212616.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:16.672Z,1513212616.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:17.067Z,1513212617.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:17.474Z,1513212617.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:17.827Z,1513212617.827 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T00:50:17.827Z,1513212617.827 [NAL9602] Data Fault, FailCount= 2
2017-12-14T00:50:17.827Z,1513212617.827 [NAL9602](ERROR): Data Fault
2017-12-14T00:50:17.887Z,1513212617.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:17.910Z,1513212617.910 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T00:50:18.230Z,1513212618.230 [NAL9602](INFO): Powering down
2017-12-14T00:50:18.276Z,1513212618.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:18.675Z,1513212618.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:19.063Z,1513212619.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:19.097Z,1513212619.097 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T00:50:19.097Z,1513212619.097 [NAL9602] No Fault, FailCount= 2
2017-12-14T00:50:19.471Z,1513212619.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:19.909Z,1513212619.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:20.264Z,1513212620.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:20.671Z,1513212620.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:21.068Z,1513212621.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:21.467Z,1513212621.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:21.867Z,1513212621.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:22.267Z,1513212622.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:22.665Z,1513212622.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:23.115Z,1513212623.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:23.535Z,1513212623.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:23.856Z,1513212623.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:24.294Z,1513212624.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:24.662Z,1513212624.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:25.099Z,1513212625.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:25.479Z,1513212625.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:25.864Z,1513212625.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:26.261Z,1513212626.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:26.696Z,1513212626.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:27.066Z,1513212627.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:27.459Z,1513212627.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:27.862Z,1513212627.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:28.265Z,1513212628.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:28.658Z,1513212628.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:29.090Z,1513212629.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:29.470Z,1513212629.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:29.860Z,1513212629.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:30.263Z,1513212630.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:30.666Z,1513212630.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:31.067Z,1513212631.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:31.467Z,1513212631.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:31.866Z,1513212631.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:32.261Z,1513212632.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:32.663Z,1513212632.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:33.094Z,1513212633.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:33.490Z,1513212633.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:33.863Z,1513212633.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:34.275Z,1513212634.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:34.667Z,1513212634.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:35.078Z,1513212635.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:35.468Z,1513212635.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:35.863Z,1513212635.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:36.273Z,1513212636.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:36.667Z,1513212636.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:37.068Z,1513212637.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:37.476Z,1513212637.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:37.866Z,1513212637.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:38.267Z,1513212638.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:38.668Z,1513212638.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:39.110Z,1513212639.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:39.472Z,1513212639.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:39.870Z,1513212639.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:40.273Z,1513212640.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:40.671Z,1513212640.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:41.084Z,1513212641.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:41.487Z,1513212641.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:41.865Z,1513212641.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:42.267Z,1513212642.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:42.691Z,1513212642.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:43.093Z,1513212643.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:43.468Z,1513212643.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:43.868Z,1513212643.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:44.268Z,1513212644.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:44.664Z,1513212644.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:45.090Z,1513212645.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:45.555Z,1513212645.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:45.869Z,1513212645.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:46.287Z,1513212646.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:46.670Z,1513212646.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:47.107Z,1513212647.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:47.464Z,1513212647.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:47.867Z,1513212647.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:48.271Z,1513212648.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:48.626Z,1513212648.626 [NAL9602](INFO): Powering up NAL9602
2017-12-14T00:50:48.711Z,1513212648.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:49.079Z,1513212649.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:49.467Z,1513212649.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:49.865Z,1513212649.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:50.269Z,1513212650.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:50.660Z,1513212650.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:51.066Z,1513212651.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:51.466Z,1513212651.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:51.954Z,1513212651.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:52.266Z,1513212652.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:52.659Z,1513212652.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:53.067Z,1513212653.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:53.468Z,1513212653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:53.865Z,1513212653.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:54.268Z,1513212654.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:54.667Z,1513212654.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:55.107Z,1513212655.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:55.506Z,1513212655.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:55.868Z,1513212655.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:56.270Z,1513212656.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:56.671Z,1513212656.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:57.075Z,1513212657.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:57.468Z,1513212657.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:57.863Z,1513212657.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:58.352Z,1513212658.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:58.662Z,1513212658.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:59.057Z,1513212659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:59.472Z,1513212659.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:50:59.828Z,1513212659.828 [NAL9602](INFO): NAL9602 initialized
2017-12-14T00:50:59.859Z,1513212659.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:00.272Z,1513212660.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:00.674Z,1513212660.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:01.079Z,1513212661.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:01.466Z,1513212661.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:01.870Z,1513212661.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:02.270Z,1513212662.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:02.671Z,1513212662.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:03.076Z,1513212663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:03.512Z,1513212663.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:03.902Z,1513212663.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:04.281Z,1513212664.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:04.675Z,1513212664.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:05.076Z,1513212665.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:05.466Z,1513212665.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:05.871Z,1513212665.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:06.283Z,1513212666.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:06.676Z,1513212666.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:07.083Z,1513212667.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:07.519Z,1513212667.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:07.866Z,1513212667.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:08.291Z,1513212668.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:08.671Z,1513212668.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:09.111Z,1513212669.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:09.504Z,1513212669.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:09.888Z,1513212669.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:10.290Z,1513212670.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:10.664Z,1513212670.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:11.068Z,1513212671.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:11.471Z,1513212671.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:14.869Z,1513212674.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:15.075Z,1513212675.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:15.476Z,1513212675.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:15.934Z,1513212675.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:16.256Z,1513212676.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:16.777Z,1513212676.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:17.082Z,1513212677.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:17.499Z,1513212677.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:17.879Z,1513212677.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:18.282Z,1513212678.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:18.664Z,1513212678.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:19.111Z,1513212679.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:19.467Z,1513212679.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:19.863Z,1513212679.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:20.271Z,1513212680.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:20.668Z,1513212680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:21.083Z,1513212681.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:21.483Z,1513212681.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:21.886Z,1513212681.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:22.336Z,1513212682.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:22.666Z,1513212682.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:23.084Z,1513212683.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:23.510Z,1513212683.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:23.872Z,1513212683.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:24.320Z,1513212684.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:24.692Z,1513212684.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:25.096Z,1513212685.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:25.525Z,1513212685.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:25.868Z,1513212685.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:26.320Z,1513212686.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:26.675Z,1513212686.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:27.088Z,1513212687.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:27.496Z,1513212687.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:27.922Z,1513212687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:28.271Z,1513212688.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:28.671Z,1513212688.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:29.136Z,1513212689.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:29.514Z,1513212689.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:29.894Z,1513212689.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:30.295Z,1513212690.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:30.699Z,1513212690.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:31.147Z,1513212691.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:31.468Z,1513212691.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:31.938Z,1513212691.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:32.334Z,1513212692.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:32.710Z,1513212692.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:33.093Z,1513212693.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:33.534Z,1513212693.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:33.911Z,1513212693.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:34.321Z,1513212694.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:34.695Z,1513212694.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:35.115Z,1513212695.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:35.508Z,1513212695.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:35.908Z,1513212695.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:36.304Z,1513212696.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:36.667Z,1513212696.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:37.161Z,1513212697.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:37.491Z,1513212697.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:37.864Z,1513212697.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:38.258Z,1513212698.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:38.727Z,1513212698.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:39.092Z,1513212699.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:39.487Z,1513212699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:39.961Z,1513212699.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:40.271Z,1513212700.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:40.676Z,1513212700.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:41.070Z,1513212701.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:41.464Z,1513212701.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:41.939Z,1513212701.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:42.283Z,1513212702.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:42.678Z,1513212702.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:43.082Z,1513212703.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:43.456Z,1513212703.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:43.879Z,1513212703.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:44.260Z,1513212704.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:44.655Z,1513212704.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:45.091Z,1513212705.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:45.499Z,1513212705.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:45.864Z,1513212705.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:46.264Z,1513212706.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:46.663Z,1513212706.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:47.063Z,1513212707.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:47.461Z,1513212707.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:47.861Z,1513212707.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:48.296Z,1513212708.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:48.672Z,1513212708.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:49.071Z,1513212709.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:49.467Z,1513212709.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:49.861Z,1513212709.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:50.270Z,1513212710.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:50.671Z,1513212710.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:51.111Z,1513212711.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:51.519Z,1513212711.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:51.891Z,1513212711.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:52.263Z,1513212712.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:52.674Z,1513212712.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:53.098Z,1513212713.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:53.478Z,1513212713.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:53.890Z,1513212713.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:54.277Z,1513212714.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:54.695Z,1513212714.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:55.087Z,1513212715.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:55.455Z,1513212715.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:55.854Z,1513212715.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:56.282Z,1513212716.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:56.660Z,1513212716.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:57.077Z,1513212717.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:57.483Z,1513212717.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:58.006Z,1513212718.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:58.256Z,1513212718.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:58.667Z,1513212718.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:59.061Z,1513212719.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:59.458Z,1513212719.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:51:59.859Z,1513212719.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:00.268Z,1513212720.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:00.719Z,1513212720.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:01.086Z,1513212721.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:01.460Z,1513212721.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:01.868Z,1513212721.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:02.306Z,1513212722.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:02.666Z,1513212722.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:03.072Z,1513212723.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:03.479Z,1513212723.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:03.873Z,1513212723.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:04.325Z,1513212724.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:04.659Z,1513212724.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:05.069Z,1513212725.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:05.467Z,1513212725.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:05.860Z,1513212725.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:06.274Z,1513212726.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:06.687Z,1513212726.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:07.095Z,1513212727.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:07.522Z,1513212727.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:07.871Z,1513212727.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:08.270Z,1513212728.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:08.671Z,1513212728.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:09.068Z,1513212729.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:09.464Z,1513212729.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:09.871Z,1513212729.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:10.263Z,1513212730.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:10.707Z,1513212730.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:11.060Z,1513212731.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:11.467Z,1513212731.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:11.883Z,1513212731.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:15.651Z,1513212735.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:15.713Z,1513212735.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:52:15.790Z,1513212735.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:16.168Z,1513212736.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:16.509Z,1513212736.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:52:16.571Z,1513212736.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:16.937Z,1513212736.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:17.377Z,1513212737.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:17.739Z,1513212737.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:18.147Z,1513212738.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:18.555Z,1513212738.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:19.037Z,1513212739.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:19.361Z,1513212739.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:19.742Z,1513212739.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:20.194Z,1513212740.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:20.539Z,1513212740.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:21.011Z,1513212741.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:21.367Z,1513212741.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:21.758Z,1513212741.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:22.147Z,1513212742.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:22.531Z,1513212742.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:22.996Z,1513212742.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:23.411Z,1513212743.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:23.758Z,1513212743.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:24.166Z,1513212744.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:24.656Z,1513212744.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:25.013Z,1513212745.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:25.363Z,1513212745.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:25.768Z,1513212745.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:26.135Z,1513212746.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:26.559Z,1513212746.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:27.026Z,1513212747.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:27.383Z,1513212747.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:27.742Z,1513212747.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:28.137Z,1513212748.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:28.538Z,1513212748.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:28.933Z,1513212748.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:29.366Z,1513212749.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:29.819Z,1513212749.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:30.151Z,1513212750.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:30.571Z,1513212750.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:30.953Z,1513212750.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:31.399Z,1513212751.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:31.749Z,1513212751.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:32.149Z,1513212752.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:32.551Z,1513212752.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:33.036Z,1513212753.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:33.387Z,1513212753.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:33.764Z,1513212753.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:34.143Z,1513212754.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:34.544Z,1513212754.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:35.003Z,1513212755.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:35.360Z,1513212755.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:35.740Z,1513212755.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:36.155Z,1513212756.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:36.588Z,1513212756.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:37.013Z,1513212757.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:37.370Z,1513212757.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:37.843Z,1513212757.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:38.185Z,1513212758.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:38.523Z,1513212758.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:39.028Z,1513212759.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:39.412Z,1513212759.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:39.779Z,1513212759.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:40.164Z,1513212760.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:40.529Z,1513212760.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:40.927Z,1513212760.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:41.377Z,1513212761.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:41.731Z,1513212761.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:42.159Z,1513212762.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:42.596Z,1513212762.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:42.978Z,1513212762.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:43.350Z,1513212763.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:43.736Z,1513212763.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:44.143Z,1513212764.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:44.532Z,1513212764.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:44.942Z,1513212764.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:45.350Z,1513212765.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:45.794Z,1513212765.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:46.142Z,1513212766.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:46.537Z,1513212766.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:47.013Z,1513212767.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:47.341Z,1513212767.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:47.742Z,1513212767.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:48.188Z,1513212768.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:48.563Z,1513212768.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:49.020Z,1513212769.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:49.362Z,1513212769.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:49.739Z,1513212769.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:50.136Z,1513212770.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:50.536Z,1513212770.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:51.006Z,1513212771.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:51.386Z,1513212771.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:51.752Z,1513212771.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:52.139Z,1513212772.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:52.542Z,1513212772.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:53.056Z,1513212773.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:53.359Z,1513212773.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:53.739Z,1513212773.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:54.146Z,1513212774.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:54.551Z,1513212774.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:55.035Z,1513212775.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:55.392Z,1513212775.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:55.748Z,1513212775.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:56.136Z,1513212776.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:56.547Z,1513212776.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:56.953Z,1513212776.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:57.353Z,1513212777.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:57.751Z,1513212777.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:58.144Z,1513212778.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:58.589Z,1513212778.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:58.936Z,1513212778.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:59.348Z,1513212779.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:52:59.738Z,1513212779.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:00.210Z,1513212780.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:00.553Z,1513212780.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:01.039Z,1513212781.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:01.350Z,1513212781.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:01.803Z,1513212781.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:02.149Z,1513212782.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:02.548Z,1513212782.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:03.012Z,1513212783.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:03.364Z,1513212783.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:03.364Z,1513212783.364 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2017-12-14T00:53:03.364Z,1513212783.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:53:03.367Z,1513212783.367 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:03.367Z,1513212783.367 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2017-12-14T00:53:03.367Z,1513212783.367 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:53:03.368Z,1513212783.368 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:03.373Z,1513212783.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-12-14T00:53:03.373Z,1513212783.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:53:03.411Z,1513212783.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:53:03.411Z,1513212783.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:53:03.411Z,1513212783.411 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:53:03.775Z,1513212783.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:53:03.775Z,1513212783.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2017-12-14T00:53:03.776Z,1513212783.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:53:03.776Z,1513212783.776 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2017-12-14T00:53:03.776Z,1513212783.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:53:03.776Z,1513212783.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-12-14T00:53:04.146Z,1513212784.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:53:04.146Z,1513212784.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:53:04.146Z,1513212784.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:53:04.147Z,1513212784.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:53:04.147Z,1513212784.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:53:04.147Z,1513212784.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:53:04.148Z,1513212784.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:53:04.148Z,1513212784.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:53:04.148Z,1513212784.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:53:04.543Z,1513212784.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:05.044Z,1513212785.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:05.383Z,1513212785.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:05.793Z,1513212785.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:06.135Z,1513212786.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:06.537Z,1513212786.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:07.019Z,1513212787.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:07.347Z,1513212787.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:07.738Z,1513212787.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:08.146Z,1513212788.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:08.552Z,1513212788.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:09.017Z,1513212789.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:09.351Z,1513212789.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:09.732Z,1513212789.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:10.179Z,1513212790.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:10.527Z,1513212790.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:10.962Z,1513212790.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:11.423Z,1513212791.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:11.763Z,1513212791.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:12.136Z,1513212792.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:15.867Z,1513212795.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:16.007Z,1513212796.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:16.344Z,1513212796.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:16.771Z,1513212796.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:17.178Z,1513212797.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:17.542Z,1513212797.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:17.971Z,1513212797.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:18.347Z,1513212798.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:18.736Z,1513212798.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:19.151Z,1513212799.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:19.545Z,1513212799.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:19.949Z,1513212799.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:20.343Z,1513212800.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:20.742Z,1513212800.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:21.175Z,1513212801.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:21.543Z,1513212801.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:22.007Z,1513212802.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:22.359Z,1513212802.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:22.783Z,1513212802.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:23.158Z,1513212803.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:23.582Z,1513212803.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:23.999Z,1513212803.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:24.339Z,1513212804.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:24.741Z,1513212804.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:25.146Z,1513212805.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:25.543Z,1513212805.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:25.698Z,1513212805.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:53:25.944Z,1513212805.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:26.339Z,1513212806.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:26.493Z,1513212806.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:53:26.744Z,1513212806.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:27.139Z,1513212807.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:27.549Z,1513212807.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:27.956Z,1513212807.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:28.364Z,1513212808.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:28.754Z,1513212808.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:29.155Z,1513212809.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:29.552Z,1513212809.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:29.946Z,1513212809.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:30.355Z,1513212810.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:30.762Z,1513212810.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:31.139Z,1513212811.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:31.567Z,1513212811.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:31.984Z,1513212811.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:32.337Z,1513212812.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:32.732Z,1513212812.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:33.139Z,1513212813.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:33.606Z,1513212813.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:33.963Z,1513212813.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:34.356Z,1513212814.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:34.763Z,1513212814.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:35.155Z,1513212815.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:35.534Z,1513212815.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:35.934Z,1513212815.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:36.336Z,1513212816.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:36.823Z,1513212816.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:37.147Z,1513212817.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:37.566Z,1513212817.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:37.944Z,1513212817.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:38.339Z,1513212818.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:38.740Z,1513212818.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:39.138Z,1513212819.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:39.572Z,1513212819.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:39.999Z,1513212819.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:40.351Z,1513212820.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:40.790Z,1513212820.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:41.142Z,1513212821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:41.537Z,1513212821.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:41.942Z,1513212821.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:42.375Z,1513212822.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:42.741Z,1513212822.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:43.180Z,1513212823.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:43.595Z,1513212823.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:43.951Z,1513212823.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:44.350Z,1513212824.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:44.774Z,1513212824.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:45.150Z,1513212825.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:45.555Z,1513212825.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:45.959Z,1513212825.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:46.426Z,1513212826.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:46.758Z,1513212826.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:47.140Z,1513212827.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:47.549Z,1513212827.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:47.947Z,1513212827.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:48.347Z,1513212828.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:48.742Z,1513212828.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:49.150Z,1513212829.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:49.587Z,1513212829.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:49.953Z,1513212829.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:50.343Z,1513212830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:50.736Z,1513212830.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:51.142Z,1513212831.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:51.542Z,1513212831.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:51.952Z,1513212831.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:52.352Z,1513212832.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:52.811Z,1513212832.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:53.147Z,1513212833.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:53.549Z,1513212833.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:53.986Z,1513212833.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:54.346Z,1513212834.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:54.739Z,1513212834.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:55.154Z,1513212835.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:55.552Z,1513212835.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:56.011Z,1513212836.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:56.340Z,1513212836.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:56.743Z,1513212836.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:57.220Z,1513212837.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:57.551Z,1513212837.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:57.952Z,1513212837.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:58.351Z,1513212838.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:58.759Z,1513212838.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:59.195Z,1513212839.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:59.539Z,1513212839.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:53:59.949Z,1513212839.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:00.347Z,1513212840.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:00.744Z,1513212840.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:01.159Z,1513212841.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:01.604Z,1513212841.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:01.963Z,1513212841.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:02.395Z,1513212842.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:02.742Z,1513212842.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:03.154Z,1513212843.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:03.547Z,1513212843.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:03.951Z,1513212843.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:04.362Z,1513212844.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:04.806Z,1513212844.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:05.141Z,1513212845.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:05.552Z,1513212845.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:05.944Z,1513212845.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:06.367Z,1513212846.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:06.741Z,1513212846.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:07.159Z,1513212847.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:07.598Z,1513212847.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:07.963Z,1513212847.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:08.369Z,1513212848.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:08.494Z,1513212848.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:08.795Z,1513212848.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:09.151Z,1513212849.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:09.290Z,1513212849.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:09.550Z,1513212849.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:09.697Z,1513212849.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:09.960Z,1513212849.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:10.353Z,1513212850.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:10.749Z,1513212850.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:11.149Z,1513212851.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:11.152Z,1513212851.152 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T00:54:11.152Z,1513212851.152 [Default:CheckIn:C.Wait] Stopped
2017-12-14T00:54:11.152Z,1513212851.152 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T00:54:11.152Z,1513212851.152 [Default:CheckIn:D] Running Loop=1
2017-12-14T00:54:11.548Z,1513212851.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:11.551Z,1513212851.551 [Default:CheckIn:D] Stopped
2017-12-14T00:54:11.551Z,1513212851.551 [Default:CheckIn:E] Running Loop=1
2017-12-14T00:54:11.977Z,1513212851.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:11.988Z,1513212851.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.936021 min 
2017-12-14T00:54:11.988Z,1513212851.988 [Default:CheckIn:E] Stopped
2017-12-14T00:54:11.988Z,1513212851.988 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T00:54:11.988Z,1513212851.988 [Default:CheckIn] Stopped
2017-12-14T00:54:11.988Z,1513212851.988 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T00:54:11.989Z,1513212851.989 [Default:CheckIn](INFO): Running loop #3
2017-12-14T00:54:11.989Z,1513212851.989 [Default:CheckIn] Running Loop=3
2017-12-14T00:54:11.989Z,1513212851.989 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T00:54:11.989Z,1513212851.989 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T00:54:12.344Z,1513212852.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:15.989Z,1513212855.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:16.167Z,1513212856.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:16.538Z,1513212856.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:16.982Z,1513212856.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:17.303Z,1513212857.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:17.696Z,1513212857.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:18.098Z,1513212858.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:18.499Z,1513212858.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:18.900Z,1513212858.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:19.325Z,1513212859.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:19.719Z,1513212859.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:20.087Z,1513212860.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:20.483Z,1513212860.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:20.917Z,1513212860.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:21.368Z,1513212861.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:21.696Z,1513212861.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:22.095Z,1513212862.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:22.494Z,1513212862.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:22.526Z,1513212862.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:22.896Z,1513212862.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:23.322Z,1513212863.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:23.352Z,1513212863.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:23.704Z,1513212863.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:23.737Z,1513212863.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:24.101Z,1513212864.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:24.495Z,1513212864.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:24.960Z,1513212864.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:25.310Z,1513212865.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:25.711Z,1513212865.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:26.105Z,1513212866.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:26.486Z,1513212866.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:26.960Z,1513212866.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:27.350Z,1513212867.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:27.710Z,1513212867.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:28.147Z,1513212868.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:28.518Z,1513212868.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:28.981Z,1513212868.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:29.315Z,1513212869.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:29.731Z,1513212869.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:30.090Z,1513212870.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:30.535Z,1513212870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:30.978Z,1513212870.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:31.339Z,1513212871.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:31.692Z,1513212871.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:32.097Z,1513212872.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:32.488Z,1513212872.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:32.925Z,1513212872.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:33.295Z,1513212873.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:33.695Z,1513212873.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:34.096Z,1513212874.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:34.638Z,1513212874.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:34.920Z,1513212874.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:35.390Z,1513212875.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:35.741Z,1513212875.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:36.098Z,1513212876.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:36.502Z,1513212876.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:36.909Z,1513212876.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:37.360Z,1513212877.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:37.715Z,1513212877.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:38.085Z,1513212878.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:38.515Z,1513212878.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:39.016Z,1513212879.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:39.287Z,1513212879.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:39.704Z,1513212879.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:40.092Z,1513212880.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:40.493Z,1513212880.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:40.988Z,1513212880.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:41.319Z,1513212881.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:41.713Z,1513212881.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:42.085Z,1513212882.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:42.511Z,1513212882.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:42.983Z,1513212882.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:43.312Z,1513212883.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:43.718Z,1513212883.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:44.083Z,1513212884.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:44.202Z,1513212884.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:44.487Z,1513212884.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:44.995Z,1513212884.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:44.997Z,1513212884.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:45.340Z,1513212885.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:45.405Z,1513212885.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:45.708Z,1513212885.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:46.101Z,1513212886.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:46.201Z,1513212886.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:46.503Z,1513212886.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:46.908Z,1513212886.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:46.998Z,1513212886.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:47.314Z,1513212887.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:47.433Z,1513212887.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:47.721Z,1513212887.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:48.095Z,1513212888.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:48.229Z,1513212888.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:48.490Z,1513212888.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:48.900Z,1513212888.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:49.025Z,1513212889.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:49.438Z,1513212889.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:49.717Z,1513212889.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:49.730Z,1513212889.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:50.094Z,1513212890.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:50.490Z,1513212890.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:50.513Z,1513212890.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:50.938Z,1513212890.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:51.310Z,1513212891.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:51.400Z,1513212891.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:51.711Z,1513212891.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:51.714Z,1513212891.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:52.127Z,1513212892.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:52.507Z,1513212892.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:52.509Z,1513212892.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:52.970Z,1513212892.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:53.306Z,1513212893.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:53.309Z,1513212893.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:53.709Z,1513212893.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:53.712Z,1513212893.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:54.115Z,1513212894.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:54.497Z,1513212894.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:54.505Z,1513212894.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:54.988Z,1513212894.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:55.301Z,1513212895.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:55.334Z,1513212895.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:55.705Z,1513212895.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:55.727Z,1513212895.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:56.106Z,1513212896.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:56.495Z,1513212896.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:56.501Z,1513212896.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:56.987Z,1513212896.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:57.298Z,1513212897.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:57.348Z,1513212897.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:57.701Z,1513212897.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:57.711Z,1513212897.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:58.087Z,1513212898.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:58.498Z,1513212898.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:58.516Z,1513212898.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:58.966Z,1513212898.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:59.293Z,1513212899.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:59.302Z,1513212899.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:54:59.697Z,1513212899.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:54:59.704Z,1513212899.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:00.095Z,1513212900.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:00.493Z,1513212900.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:00.534Z,1513212900.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:00.905Z,1513212900.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:01.290Z,1513212901.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:01.339Z,1513212901.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:01.693Z,1513212901.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:01.701Z,1513212901.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:02.103Z,1513212902.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:02.489Z,1513212902.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:02.496Z,1513212902.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:02.901Z,1513212902.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:03.286Z,1513212903.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:03.357Z,1513212903.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:03.710Z,1513212903.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:03.720Z,1513212903.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:04.103Z,1513212904.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:04.496Z,1513212904.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:04.505Z,1513212904.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:04.901Z,1513212904.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:05.301Z,1513212905.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:05.373Z,1513212905.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:05.719Z,1513212905.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:05.749Z,1513212905.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:06.099Z,1513212906.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:06.491Z,1513212906.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:06.545Z,1513212906.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:07.028Z,1513212907.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:07.319Z,1513212907.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:07.341Z,1513212907.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:07.723Z,1513212907.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:07.762Z,1513212907.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:08.086Z,1513212908.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:08.486Z,1513212908.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:08.557Z,1513212908.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:08.982Z,1513212908.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:09.320Z,1513212909.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:09.354Z,1513212909.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:09.700Z,1513212909.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:09.757Z,1513212909.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:10.092Z,1513212910.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:10.507Z,1513212910.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:10.555Z,1513212910.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:10.998Z,1513212910.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:11.310Z,1513212911.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:11.349Z,1513212911.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:11.710Z,1513212911.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:11.753Z,1513212911.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:12.119Z,1513212912.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:12.498Z,1513212912.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:12.549Z,1513212912.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:13.346Z,1513212913.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:13.749Z,1513212913.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:14.545Z,1513212914.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:15.341Z,1513212915.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:15.745Z,1513212915.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:16.219Z,1513212916.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:16.353Z,1513212916.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:16.542Z,1513212916.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:16.732Z,1513212916.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:17.158Z,1513212917.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:17.339Z,1513212917.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:17.522Z,1513212917.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:17.741Z,1513212917.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:17.959Z,1513212917.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:18.323Z,1513212918.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:18.540Z,1513212918.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:18.727Z,1513212918.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:19.203Z,1513212919.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:19.334Z,1513212919.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:19.514Z,1513212919.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:19.737Z,1513212919.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:19.922Z,1513212919.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:20.328Z,1513212920.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:20.533Z,1513212920.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:20.728Z,1513212920.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:21.111Z,1513212921.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:21.329Z,1513212921.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:21.522Z,1513212921.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:21.733Z,1513212921.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:21.928Z,1513212921.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:22.323Z,1513212922.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:22.529Z,1513212922.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:22.762Z,1513212922.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:23.119Z,1513212923.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:23.325Z,1513212923.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:23.532Z,1513212923.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:23.729Z,1513212923.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:23.935Z,1513212923.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:24.332Z,1513212924.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:24.525Z,1513212924.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:24.715Z,1513212924.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:25.112Z,1513212925.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:25.324Z,1513212925.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:25.511Z,1513212925.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:25.729Z,1513212925.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:25.946Z,1513212925.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:26.359Z,1513212926.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:26.525Z,1513212926.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:26.741Z,1513212926.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:27.115Z,1513212927.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:27.325Z,1513212927.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:27.510Z,1513212927.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:27.729Z,1513212927.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:27.916Z,1513212927.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:28.320Z,1513212928.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:28.527Z,1513212928.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:28.716Z,1513212928.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:29.150Z,1513212929.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:29.321Z,1513212929.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:29.517Z,1513212929.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:29.725Z,1513212929.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:29.957Z,1513212929.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:30.320Z,1513212930.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:30.522Z,1513212930.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:30.719Z,1513212930.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:31.156Z,1513212931.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:31.318Z,1513212931.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:31.569Z,1513212931.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:31.721Z,1513212931.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:31.927Z,1513212931.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:32.367Z,1513212932.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:32.518Z,1513212932.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:32.751Z,1513212932.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:33.115Z,1513212933.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:33.314Z,1513212933.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:33.547Z,1513212933.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:33.717Z,1513212933.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:33.930Z,1513212933.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:34.328Z,1513212934.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:34.513Z,1513212934.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:34.731Z,1513212934.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:35.123Z,1513212935.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:35.309Z,1513212935.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:35.554Z,1513212935.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:35.713Z,1513212935.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:36.035Z,1513212936.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:36.325Z,1513212936.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:36.509Z,1513212936.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:36.727Z,1513212936.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:37.131Z,1513212937.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:37.308Z,1513212937.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:37.522Z,1513212937.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:37.713Z,1513212937.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:37.931Z,1513212937.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:38.331Z,1513212938.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:38.509Z,1513212938.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:38.774Z,1513212938.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:39.106Z,1513212939.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:39.305Z,1513212939.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:39.517Z,1513212939.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:39.709Z,1513212939.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:39.914Z,1513212939.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:40.316Z,1513212940.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:40.505Z,1513212940.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:40.715Z,1513212940.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:41.122Z,1513212941.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:41.302Z,1513212941.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:41.535Z,1513212941.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:41.705Z,1513212941.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:42.011Z,1513212942.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:42.307Z,1513212942.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:42.501Z,1513212942.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:42.716Z,1513212942.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:43.113Z,1513212943.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:43.297Z,1513212943.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:43.526Z,1513212943.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:43.701Z,1513212943.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:43.931Z,1513212943.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:44.328Z,1513212944.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:44.497Z,1513212944.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:44.726Z,1513212944.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:45.157Z,1513212945.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:45.294Z,1513212945.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:45.504Z,1513212945.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:45.721Z,1513212945.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:45.932Z,1513212945.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:46.336Z,1513212946.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:46.517Z,1513212946.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:46.731Z,1513212946.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:47.123Z,1513212947.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:47.313Z,1513212947.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:47.502Z,1513212947.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:47.717Z,1513212947.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:47.930Z,1513212947.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:48.332Z,1513212948.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:48.513Z,1513212948.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:48.739Z,1513212948.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:49.236Z,1513212949.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:49.309Z,1513212949.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:49.511Z,1513212949.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:49.713Z,1513212949.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:49.923Z,1513212949.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:50.321Z,1513212950.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:50.510Z,1513212950.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:50.720Z,1513212950.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:51.121Z,1513212951.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:51.305Z,1513212951.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:51.515Z,1513212951.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:51.709Z,1513212951.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:51.980Z,1513212951.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:52.338Z,1513212952.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:52.505Z,1513212952.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:52.770Z,1513212952.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:53.119Z,1513212953.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:53.301Z,1513212953.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:53.515Z,1513212953.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:53.705Z,1513212953.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:53.974Z,1513212953.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:54.328Z,1513212954.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:54.501Z,1513212954.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:54.759Z,1513212954.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:55.114Z,1513212955.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:55.298Z,1513212955.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:55.551Z,1513212955.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:55.701Z,1513212955.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:55.926Z,1513212955.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:56.328Z,1513212956.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:56.497Z,1513212956.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:56.725Z,1513212956.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:57.119Z,1513212957.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:57.293Z,1513212957.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:57.523Z,1513212957.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:57.697Z,1513212957.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:58.022Z,1513212958.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:58.366Z,1513212958.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:58.494Z,1513212958.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:58.735Z,1513212958.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:59.118Z,1513212959.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:59.290Z,1513212959.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:59.518Z,1513212959.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:55:59.697Z,1513212959.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:55:59.924Z,1513212959.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:00.326Z,1513212960.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:00.493Z,1513212960.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:00.725Z,1513212960.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:01.116Z,1513212961.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:01.290Z,1513212961.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:01.548Z,1513212961.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:01.705Z,1513212961.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:01.915Z,1513212961.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:02.324Z,1513212962.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:02.501Z,1513212962.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:02.715Z,1513212962.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:03.115Z,1513212963.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:03.297Z,1513212963.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:03.508Z,1513212963.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:03.701Z,1513212963.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:03.940Z,1513212963.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:04.319Z,1513212964.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:04.319Z,1513212964.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2017-12-14T00:56:04.319Z,1513212964.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:56:04.321Z,1513212964.321 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:04.321Z,1513212964.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2017-12-14T00:56:04.321Z,1513212964.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:56:04.323Z,1513212964.323 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:04.323Z,1513212964.323 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-12-14T00:56:04.323Z,1513212964.323 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:56:04.359Z,1513212964.359 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:56:04.360Z,1513212964.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:56:04.360Z,1513212964.360 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:56:04.497Z,1513212964.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:04.814Z,1513212964.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:56:04.814Z,1513212964.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2017-12-14T00:56:04.814Z,1513212964.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:56:04.814Z,1513212964.814 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2017-12-14T00:56:04.815Z,1513212964.815 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:56:04.815Z,1513212964.815 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-12-14T00:56:05.121Z,1513212965.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:56:05.122Z,1513212965.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:56:05.122Z,1513212965.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:56:05.122Z,1513212965.122 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:56:05.123Z,1513212965.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:56:05.123Z,1513212965.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:56:05.123Z,1513212965.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:56:05.124Z,1513212965.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:56:05.124Z,1513212965.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:56:05.293Z,1513212965.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:05.521Z,1513212965.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:05.697Z,1513212965.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:05.900Z,1513212965.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:06.322Z,1513212966.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:06.493Z,1513212966.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:06.696Z,1513212966.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:07.127Z,1513212967.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:07.289Z,1513212967.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:07.532Z,1513212967.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:07.693Z,1513212967.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:07.943Z,1513212967.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:08.320Z,1513212968.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:08.489Z,1513212968.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:08.710Z,1513212968.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:09.109Z,1513212969.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:09.285Z,1513212969.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:09.508Z,1513212969.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:09.689Z,1513212969.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:09.923Z,1513212969.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:10.316Z,1513212970.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:10.485Z,1513212970.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:10.716Z,1513212970.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:11.147Z,1513212971.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:11.281Z,1513212971.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:11.515Z,1513212971.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:11.685Z,1513212971.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:11.916Z,1513212971.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:12.319Z,1513212972.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:12.481Z,1513212972.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:12.720Z,1513212972.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:13.283Z,1513212973.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:13.717Z,1513212973.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:14.513Z,1513212974.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:15.310Z,1513212975.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:15.713Z,1513212975.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:16.411Z,1513212976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:16.509Z,1513212976.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:16.543Z,1513212976.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:17.011Z,1513212977.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:17.305Z,1513212977.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:17.320Z,1513212977.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:17.709Z,1513212977.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:17.739Z,1513212977.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:18.096Z,1513212978.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:18.507Z,1513212978.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:18.551Z,1513212978.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:19.068Z,1513212979.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:19.302Z,1513212979.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:19.394Z,1513212979.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:19.705Z,1513212979.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:19.842Z,1513212979.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:20.186Z,1513212980.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:20.502Z,1513212980.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:20.606Z,1513212980.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:21.061Z,1513212981.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:21.299Z,1513212981.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:21.412Z,1513212981.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:21.701Z,1513212981.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:21.718Z,1513212981.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:22.154Z,1513212982.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:22.497Z,1513212982.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:22.523Z,1513212982.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:23.024Z,1513212983.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:23.309Z,1513212983.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:23.323Z,1513212983.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:23.702Z,1513212983.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:23.713Z,1513212983.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:24.158Z,1513212984.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:24.509Z,1513212984.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:24.523Z,1513212984.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:25.018Z,1513212985.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:25.309Z,1513212985.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:25.339Z,1513212985.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:25.711Z,1513212985.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:25.713Z,1513212985.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:26.147Z,1513212986.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:26.510Z,1513212986.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:26.523Z,1513212986.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:26.924Z,1513212986.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:27.306Z,1513212987.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:27.374Z,1513212987.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:27.727Z,1513212987.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:27.791Z,1513212987.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:28.128Z,1513212988.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:28.499Z,1513212988.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:28.586Z,1513212988.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:28.926Z,1513212988.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:29.383Z,1513212989.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:29.411Z,1513212989.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:29.738Z,1513212989.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:29.793Z,1513212989.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:30.099Z,1513212990.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:30.499Z,1513212990.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:30.589Z,1513212990.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:30.962Z,1513212990.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:31.341Z,1513212991.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:31.386Z,1513212991.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:31.717Z,1513212991.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:31.790Z,1513212991.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:32.178Z,1513212992.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:32.553Z,1513212992.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:32.587Z,1513212992.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:33.030Z,1513212993.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:33.328Z,1513212993.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:33.389Z,1513212993.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:33.793Z,1513212993.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:33.798Z,1513212993.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:34.175Z,1513212994.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:34.539Z,1513212994.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:34.590Z,1513212994.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:34.994Z,1513212994.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:35.319Z,1513212995.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:35.386Z,1513212995.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:35.724Z,1513212995.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:35.791Z,1513212995.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:36.118Z,1513212996.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:36.585Z,1513212996.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:36.603Z,1513212996.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:37.026Z,1513212997.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:37.351Z,1513212997.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:37.384Z,1513212997.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:37.742Z,1513212997.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:37.798Z,1513212997.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:38.119Z,1513212998.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:38.528Z,1513212998.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:38.594Z,1513212998.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:38.904Z,1513212998.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:39.315Z,1513212999.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:39.389Z,1513212999.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:39.707Z,1513212999.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:39.793Z,1513212999.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:40.144Z,1513213000.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:40.496Z,1513213000.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:40.590Z,1513213000.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:40.943Z,1513213000.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:41.359Z,1513213001.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:41.386Z,1513213001.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:41.719Z,1513213001.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:41.789Z,1513213001.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:42.114Z,1513213002.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:42.488Z,1513213002.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:42.585Z,1513213002.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:42.915Z,1513213002.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:43.348Z,1513213003.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:43.381Z,1513213003.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:43.738Z,1513213003.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:43.788Z,1513213003.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:44.096Z,1513213004.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:44.493Z,1513213004.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:44.581Z,1513213004.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:44.976Z,1513213004.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:45.323Z,1513213005.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:45.377Z,1513213005.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:45.722Z,1513213005.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:45.782Z,1513213005.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:46.100Z,1513213006.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:46.496Z,1513213006.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:46.578Z,1513213006.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:47.027Z,1513213007.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:47.323Z,1513213007.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:47.375Z,1513213007.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:47.701Z,1513213007.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:47.786Z,1513213007.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:48.094Z,1513213008.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:48.493Z,1513213008.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:48.583Z,1513213008.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:48.998Z,1513213008.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:49.304Z,1513213009.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:49.377Z,1513213009.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:49.701Z,1513213009.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:49.781Z,1513213009.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:50.095Z,1513213010.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:50.498Z,1513213010.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:50.579Z,1513213010.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:50.995Z,1513213010.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:51.311Z,1513213011.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:51.374Z,1513213011.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:51.703Z,1513213011.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:51.777Z,1513213011.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:52.098Z,1513213012.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:52.500Z,1513213012.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:52.574Z,1513213012.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:52.902Z,1513213012.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:53.332Z,1513213013.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:53.369Z,1513213013.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:53.712Z,1513213013.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:53.775Z,1513213013.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:54.118Z,1513213014.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:54.483Z,1513213014.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:54.569Z,1513213014.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:54.919Z,1513213014.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:55.342Z,1513213015.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:55.365Z,1513213015.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:55.717Z,1513213015.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:55.771Z,1513213015.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:56.093Z,1513213016.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:56.524Z,1513213016.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:56.566Z,1513213016.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:56.920Z,1513213016.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:57.339Z,1513213017.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:57.362Z,1513213017.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:57.696Z,1513213017.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:57.773Z,1513213017.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:58.095Z,1513213018.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:58.499Z,1513213018.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:58.569Z,1513213018.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:58.976Z,1513213018.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:59.301Z,1513213019.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:59.365Z,1513213019.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:56:59.726Z,1513213019.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:56:59.769Z,1513213019.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:00.105Z,1513213020.105 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T00:57:00.105Z,1513213020.105 [BPC1] Data Fault, FailCount= 1
2017-12-14T00:57:00.105Z,1513213020.105 [BPC1](ERROR): Data Fault
2017-12-14T00:57:00.119Z,1513213020.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:00.165Z,1513213020.165 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T00:57:00.497Z,1513213020.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:00.566Z,1513213020.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:00.984Z,1513213020.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:01.313Z,1513213021.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:01.326Z,1513213021.326 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T00:57:01.326Z,1513213021.326 [BPC1] No Fault, FailCount= 1
2017-12-14T00:57:01.361Z,1513213021.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:01.765Z,1513213021.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:01.811Z,1513213021.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:02.092Z,1513213022.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:02.493Z,1513213022.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:02.561Z,1513213022.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:02.967Z,1513213022.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:03.327Z,1513213023.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:03.357Z,1513213023.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:03.719Z,1513213023.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:03.762Z,1513213023.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:04.096Z,1513213024.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:04.492Z,1513213024.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:04.557Z,1513213024.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:04.996Z,1513213024.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:05.325Z,1513213025.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:05.367Z,1513213025.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:05.719Z,1513213025.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:05.773Z,1513213025.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:06.102Z,1513213026.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:06.495Z,1513213026.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:06.569Z,1513213026.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:06.908Z,1513213026.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:07.314Z,1513213027.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:07.365Z,1513213027.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:07.710Z,1513213027.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:07.769Z,1513213027.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:08.103Z,1513213028.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:08.495Z,1513213028.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:08.566Z,1513213028.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:08.912Z,1513213028.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:09.362Z,1513213029.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:09.398Z,1513213029.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:09.765Z,1513213029.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:09.780Z,1513213029.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:10.127Z,1513213030.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:10.510Z,1513213030.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:10.562Z,1513213030.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:10.914Z,1513213030.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:11.353Z,1513213031.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:11.357Z,1513213031.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:11.712Z,1513213031.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:11.763Z,1513213031.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:12.111Z,1513213032.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:12.510Z,1513213032.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:12.558Z,1513213032.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:12.959Z,1513213032.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:13.353Z,1513213033.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:13.758Z,1513213033.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:14.553Z,1513213034.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:15.351Z,1513213035.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:15.761Z,1513213035.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:16.432Z,1513213036.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:16.557Z,1513213036.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:16.580Z,1513213036.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:16.974Z,1513213036.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:17.318Z,1513213037.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:17.354Z,1513213037.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:17.715Z,1513213037.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:18.131Z,1513213038.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:18.177Z,1513213038.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:18.523Z,1513213038.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:18.971Z,1513213038.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:18.973Z,1513213038.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:19.304Z,1513213039.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:19.707Z,1513213039.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:19.771Z,1513213039.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:20.127Z,1513213040.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:20.511Z,1513213040.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:20.566Z,1513213040.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:20.982Z,1513213040.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:21.317Z,1513213041.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:21.362Z,1513213041.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:21.716Z,1513213041.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:22.158Z,1513213042.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:22.193Z,1513213042.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:22.512Z,1513213042.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:22.907Z,1513213042.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:22.953Z,1513213042.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:23.365Z,1513213043.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:23.708Z,1513213043.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:23.749Z,1513213043.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:24.139Z,1513213044.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:24.503Z,1513213044.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:24.545Z,1513213044.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:24.908Z,1513213044.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:25.342Z,1513213045.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:25.402Z,1513213045.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:25.720Z,1513213045.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:25.745Z,1513213045.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:26.110Z,1513213046.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:26.149Z,1513213046.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:26.510Z,1513213046.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:26.555Z,1513213046.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:26.966Z,1513213046.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:26.990Z,1513213046.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:27.308Z,1513213047.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:27.369Z,1513213047.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:27.705Z,1513213047.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:27.777Z,1513213047.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:28.103Z,1513213048.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:28.500Z,1513213048.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:28.573Z,1513213048.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:28.985Z,1513213048.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:29.312Z,1513213049.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:29.371Z,1513213049.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:29.737Z,1513213049.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:29.773Z,1513213049.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:30.107Z,1513213050.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:30.507Z,1513213050.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:30.569Z,1513213050.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:30.975Z,1513213050.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:31.317Z,1513213051.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:31.365Z,1513213051.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:31.769Z,1513213051.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:31.792Z,1513213051.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:32.114Z,1513213052.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:32.535Z,1513213052.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:32.567Z,1513213052.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:32.988Z,1513213052.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:33.335Z,1513213053.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:33.378Z,1513213053.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:33.708Z,1513213053.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:33.781Z,1513213053.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:34.101Z,1513213054.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:34.511Z,1513213054.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:34.577Z,1513213054.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:35.032Z,1513213055.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:35.332Z,1513213055.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:35.379Z,1513213055.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:35.709Z,1513213055.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:36.102Z,1513213056.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:36.173Z,1513213056.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:36.503Z,1513213056.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:36.577Z,1513213056.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:36.937Z,1513213056.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:37.342Z,1513213057.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:37.373Z,1513213057.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:37.712Z,1513213057.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:37.777Z,1513213057.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:38.107Z,1513213058.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:38.505Z,1513213058.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:38.574Z,1513213058.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:38.909Z,1513213058.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:39.342Z,1513213059.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:39.369Z,1513213059.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:39.712Z,1513213059.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:39.773Z,1513213059.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:40.104Z,1513213060.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:40.510Z,1513213060.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:40.571Z,1513213060.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:41.006Z,1513213061.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:41.342Z,1513213061.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:41.366Z,1513213061.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:41.719Z,1513213061.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:41.769Z,1513213061.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:42.136Z,1513213062.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:42.508Z,1513213062.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:42.565Z,1513213062.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:42.968Z,1513213062.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:43.351Z,1513213063.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:43.362Z,1513213063.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:43.708Z,1513213063.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:43.767Z,1513213063.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:44.196Z,1513213064.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:44.501Z,1513213064.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:44.561Z,1513213064.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:44.995Z,1513213064.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:45.357Z,1513213065.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:45.405Z,1513213065.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:45.743Z,1513213065.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:45.761Z,1513213065.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:46.106Z,1513213066.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:46.503Z,1513213066.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:46.557Z,1513213066.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:46.986Z,1513213066.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:47.311Z,1513213067.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:47.355Z,1513213067.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:47.708Z,1513213067.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:47.761Z,1513213067.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:48.108Z,1513213068.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:48.507Z,1513213068.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:48.557Z,1513213068.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:48.915Z,1513213068.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:49.320Z,1513213069.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:49.354Z,1513213069.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:49.730Z,1513213069.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:49.757Z,1513213069.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:50.107Z,1513213070.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:50.507Z,1513213070.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:50.554Z,1513213070.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:50.925Z,1513213070.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:51.348Z,1513213071.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:51.350Z,1513213071.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:51.743Z,1513213071.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:51.754Z,1513213071.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:52.111Z,1513213072.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:52.503Z,1513213072.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:52.549Z,1513213072.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:52.923Z,1513213072.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:53.346Z,1513213073.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:53.352Z,1513213073.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:53.723Z,1513213073.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:53.749Z,1513213073.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:54.150Z,1513213074.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:54.514Z,1513213074.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:54.546Z,1513213074.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:54.974Z,1513213074.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:55.308Z,1513213075.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:55.342Z,1513213075.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:55.715Z,1513213075.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:55.745Z,1513213075.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:56.106Z,1513213076.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:56.511Z,1513213076.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:56.542Z,1513213076.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:57.075Z,1513213077.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:57.316Z,1513213077.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:57.338Z,1513213077.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:57.713Z,1513213077.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:57.741Z,1513213077.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:58.108Z,1513213078.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:58.507Z,1513213078.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:58.537Z,1513213078.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:59.015Z,1513213079.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:59.322Z,1513213079.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:59.334Z,1513213079.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:57:59.732Z,1513213079.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:57:59.737Z,1513213079.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:00.119Z,1513213080.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:00.498Z,1513213080.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:00.533Z,1513213080.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:00.988Z,1513213080.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:01.330Z,1513213081.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:01.343Z,1513213081.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:01.733Z,1513213081.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:01.740Z,1513213081.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:02.114Z,1513213082.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:02.506Z,1513213082.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:02.529Z,1513213082.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:02.908Z,1513213082.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:03.324Z,1513213083.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:03.326Z,1513213083.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:03.729Z,1513213083.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:03.731Z,1513213083.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:04.104Z,1513213084.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:04.525Z,1513213084.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:04.575Z,1513213084.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:04.986Z,1513213084.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:05.323Z,1513213085.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:05.363Z,1513213085.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:05.717Z,1513213085.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:05.738Z,1513213085.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:06.109Z,1513213086.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:06.534Z,1513213086.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:06.539Z,1513213086.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:06.918Z,1513213086.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:07.330Z,1513213087.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:07.359Z,1513213087.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:07.734Z,1513213087.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:07.781Z,1513213087.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:08.118Z,1513213088.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:08.527Z,1513213088.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:08.529Z,1513213088.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:08.956Z,1513213088.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:09.316Z,1513213089.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:09.326Z,1513213089.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:09.712Z,1513213089.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:09.729Z,1513213089.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:10.105Z,1513213090.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:10.507Z,1513213090.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:10.545Z,1513213090.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:11.021Z,1513213091.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:11.323Z,1513213091.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:11.341Z,1513213091.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:11.723Z,1513213091.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:11.745Z,1513213091.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:12.113Z,1513213092.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:12.516Z,1513213092.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:12.541Z,1513213092.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:12.993Z,1513213092.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:13.338Z,1513213093.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:13.742Z,1513213093.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:14.537Z,1513213094.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:15.333Z,1513213095.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:15.737Z,1513213095.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:16.533Z,1513213096.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:16.578Z,1513213096.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:16.699Z,1513213096.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:17.058Z,1513213097.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:17.329Z,1513213097.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:17.511Z,1513213097.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:17.733Z,1513213097.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:17.858Z,1513213097.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:18.287Z,1513213098.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:18.529Z,1513213098.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:18.660Z,1513213098.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:19.088Z,1513213099.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:19.325Z,1513213099.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:19.463Z,1513213099.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:19.729Z,1513213099.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:19.862Z,1513213099.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:20.255Z,1513213100.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:20.525Z,1513213100.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:20.740Z,1513213100.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:21.073Z,1513213101.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:21.321Z,1513213101.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:21.472Z,1513213101.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:21.725Z,1513213101.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:21.872Z,1513213101.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:22.254Z,1513213102.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:22.521Z,1513213102.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:22.648Z,1513213102.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:23.055Z,1513213103.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:23.317Z,1513213103.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:23.451Z,1513213103.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:23.721Z,1513213103.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:23.855Z,1513213103.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:24.282Z,1513213104.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:24.517Z,1513213104.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:24.685Z,1513213104.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:25.085Z,1513213105.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:25.315Z,1513213105.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:25.467Z,1513213105.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:25.717Z,1513213105.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:25.855Z,1513213105.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:26.259Z,1513213106.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:26.516Z,1513213106.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:26.653Z,1513213106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:27.111Z,1513213107.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:27.309Z,1513213107.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:27.483Z,1513213107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:27.715Z,1513213107.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:27.895Z,1513213107.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:28.258Z,1513213108.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:28.509Z,1513213108.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:28.698Z,1513213108.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:29.062Z,1513213109.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:29.306Z,1513213109.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:29.464Z,1513213109.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:29.709Z,1513213109.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:29.895Z,1513213109.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:30.303Z,1513213110.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:30.505Z,1513213110.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:30.695Z,1513213110.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:31.067Z,1513213111.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:31.301Z,1513213111.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:31.459Z,1513213111.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:31.705Z,1513213111.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:31.856Z,1513213111.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:32.261Z,1513213112.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:32.501Z,1513213112.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:32.656Z,1513213112.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:33.069Z,1513213113.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:33.298Z,1513213113.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:33.527Z,1513213113.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:33.701Z,1513213113.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:33.868Z,1513213113.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:34.260Z,1513213114.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:34.497Z,1513213114.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:34.666Z,1513213114.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:35.066Z,1513213115.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:35.294Z,1513213115.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:35.461Z,1513213115.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:35.697Z,1513213115.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:35.861Z,1513213115.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:36.265Z,1513213116.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:36.493Z,1513213116.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:36.688Z,1513213116.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:37.065Z,1513213117.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:37.289Z,1513213117.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:37.479Z,1513213117.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:37.693Z,1513213117.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:37.853Z,1513213117.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:38.256Z,1513213118.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:38.489Z,1513213118.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:38.651Z,1513213118.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:39.103Z,1513213119.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:39.285Z,1513213119.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:39.464Z,1513213119.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:39.689Z,1513213119.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:39.944Z,1513213119.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:40.259Z,1513213120.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:40.485Z,1513213120.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:40.659Z,1513213120.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:41.059Z,1513213121.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:41.281Z,1513213121.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:41.455Z,1513213121.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:41.685Z,1513213121.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:41.862Z,1513213121.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:42.260Z,1513213122.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:42.481Z,1513213122.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:42.665Z,1513213122.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:43.104Z,1513213123.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:43.277Z,1513213123.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:43.460Z,1513213123.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:43.681Z,1513213123.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:43.860Z,1513213123.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:44.263Z,1513213124.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:44.480Z,1513213124.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:44.659Z,1513213124.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:45.069Z,1513213125.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:45.281Z,1513213125.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:45.467Z,1513213125.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:45.685Z,1513213125.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:45.874Z,1513213125.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:46.260Z,1513213126.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:46.481Z,1513213126.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:46.659Z,1513213126.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:47.063Z,1513213127.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:47.279Z,1513213127.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:47.457Z,1513213127.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:47.697Z,1513213127.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:47.859Z,1513213127.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:48.273Z,1513213128.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:48.495Z,1513213128.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:48.679Z,1513213128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:49.074Z,1513213129.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:49.290Z,1513213129.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:49.464Z,1513213129.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:49.693Z,1513213129.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:49.846Z,1513213129.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:50.326Z,1513213130.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:50.489Z,1513213130.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:50.655Z,1513213130.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:51.143Z,1513213131.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:51.285Z,1513213131.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:51.486Z,1513213131.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:51.689Z,1513213131.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:51.890Z,1513213131.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:52.255Z,1513213132.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:52.485Z,1513213132.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:52.694Z,1513213132.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:53.058Z,1513213133.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:53.281Z,1513213133.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:53.489Z,1513213133.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:53.685Z,1513213133.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:53.866Z,1513213133.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:54.272Z,1513213134.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:54.481Z,1513213134.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:54.676Z,1513213134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:55.080Z,1513213135.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:55.278Z,1513213135.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:55.466Z,1513213135.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:55.681Z,1513213135.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:55.857Z,1513213135.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:56.257Z,1513213136.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:56.477Z,1513213136.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:56.732Z,1513213136.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:57.061Z,1513213137.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:57.273Z,1513213137.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:57.488Z,1513213137.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:57.677Z,1513213137.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:57.863Z,1513213137.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:57.897Z,1513213137.897 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T00:58:58.251Z,1513213138.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:58.473Z,1513213138.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:58.655Z,1513213138.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:59.072Z,1513213139.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:59.272Z,1513213139.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:59.458Z,1513213139.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:58:59.677Z,1513213139.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:58:59.938Z,1513213139.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:00.261Z,1513213140.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:00.475Z,1513213140.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:00.662Z,1513213140.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:01.095Z,1513213141.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:01.271Z,1513213141.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:01.459Z,1513213141.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:01.697Z,1513213141.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:01.854Z,1513213141.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:02.258Z,1513213142.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:02.493Z,1513213142.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:02.658Z,1513213142.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:03.120Z,1513213143.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:03.290Z,1513213143.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:03.468Z,1513213143.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:03.701Z,1513213143.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:03.870Z,1513213143.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:04.259Z,1513213144.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:04.497Z,1513213144.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:04.663Z,1513213144.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:05.060Z,1513213145.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:05.293Z,1513213145.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:05.467Z,1513213145.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:05.467Z,1513213145.467 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2017-12-14T00:59:05.467Z,1513213145.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T00:59:05.469Z,1513213145.469 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:05.469Z,1513213145.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2017-12-14T00:59:05.469Z,1513213145.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T00:59:05.471Z,1513213145.471 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:05.471Z,1513213145.471 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-12-14T00:59:05.471Z,1513213145.471 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T00:59:05.483Z,1513213145.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T00:59:05.483Z,1513213145.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T00:59:05.483Z,1513213145.483 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T00:59:05.697Z,1513213145.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:05.877Z,1513213145.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T00:59:05.877Z,1513213145.877 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2017-12-14T00:59:05.878Z,1513213145.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T00:59:05.878Z,1513213145.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2017-12-14T00:59:05.878Z,1513213145.878 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T00:59:05.878Z,1513213145.878 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-12-14T00:59:06.272Z,1513213146.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T00:59:06.273Z,1513213146.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:59:06.273Z,1513213146.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:59:06.274Z,1513213146.274 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T00:59:06.274Z,1513213146.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:59:06.274Z,1513213146.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:59:06.275Z,1513213146.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T00:59:06.275Z,1513213146.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T00:59:06.275Z,1513213146.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T00:59:06.493Z,1513213146.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:06.674Z,1513213146.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:07.056Z,1513213147.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:07.289Z,1513213147.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:07.479Z,1513213147.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:07.693Z,1513213147.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:07.854Z,1513213147.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:08.255Z,1513213148.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:08.489Z,1513213148.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:08.655Z,1513213148.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:09.060Z,1513213149.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:09.285Z,1513213149.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:09.495Z,1513213149.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:09.689Z,1513213149.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:09.859Z,1513213149.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:10.263Z,1513213150.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:10.486Z,1513213150.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:10.663Z,1513213150.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:11.055Z,1513213151.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:11.283Z,1513213151.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:11.467Z,1513213151.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:11.689Z,1513213151.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:11.854Z,1513213151.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:12.271Z,1513213152.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:12.274Z,1513213152.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T00:54:11.0Z
2017-12-14T00:59:12.275Z,1513213152.275 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T00:59:12.275Z,1513213152.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T00:59:12.485Z,1513213152.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:12.792Z,1513213152.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:13.281Z,1513213153.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:14.078Z,1513213154.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:14.341Z,1513213154.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:14.481Z,1513213154.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:15.280Z,1513213155.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:15.713Z,1513213155.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:16.510Z,1513213156.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:17.305Z,1513213157.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:17.737Z,1513213157.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:17.930Z,1513213157.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:18.009Z,1513213158.009 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0012.lzma
2017-12-14T00:59:18.078Z,1513213158.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:18.427Z,1513213158.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:18.533Z,1513213158.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:18.758Z,1513213158.758 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0012.lzma.bak
2017-12-14T00:59:18.759Z,1513213158.759 [DataOverHttps](INFO): SBD MOMSN=5437279
2017-12-14T00:59:18.834Z,1513213158.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:19.329Z,1513213159.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:19.733Z,1513213159.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:20.529Z,1513213160.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:21.325Z,1513213161.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:21.729Z,1513213161.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:22.525Z,1513213162.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:23.326Z,1513213163.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:23.729Z,1513213163.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:24.525Z,1513213164.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:25.321Z,1513213165.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:25.725Z,1513213165.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:26.524Z,1513213166.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:27.317Z,1513213167.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:27.724Z,1513213167.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:28.517Z,1513213168.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:29.314Z,1513213169.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:29.717Z,1513213169.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:30.513Z,1513213170.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:31.310Z,1513213171.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:31.717Z,1513213171.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:32.513Z,1513213172.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:33.313Z,1513213173.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:33.717Z,1513213173.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:34.513Z,1513213174.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:35.309Z,1513213175.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:35.713Z,1513213175.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:36.509Z,1513213176.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:37.305Z,1513213177.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:37.709Z,1513213177.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:38.505Z,1513213178.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:39.301Z,1513213179.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:39.705Z,1513213179.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:40.501Z,1513213180.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:41.297Z,1513213181.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:42.105Z,1513213182.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:42.901Z,1513213182.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:43.697Z,1513213183.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:43.811Z,1513213183.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:43.944Z,1513213183.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:44.101Z,1513213184.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:44.506Z,1513213184.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:45.301Z,1513213185.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:45.713Z,1513213185.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:46.509Z,1513213186.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:47.306Z,1513213187.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:47.709Z,1513213187.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:48.146Z,1513213188.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:48.362Z,1513213188.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:48.506Z,1513213188.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:48.711Z,1513213188.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:49.116Z,1513213189.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:49.301Z,1513213189.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:49.513Z,1513213189.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:49.706Z,1513213189.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:49.903Z,1513213189.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:50.501Z,1513213190.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:51.297Z,1513213191.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:51.701Z,1513213191.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:52.497Z,1513213192.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:53.294Z,1513213193.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:53.431Z,1513213193.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:53.509Z,1513213193.509 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0013.lzma
2017-12-14T00:59:53.565Z,1513213193.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:53.697Z,1513213193.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:53.933Z,1513213193.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:54.279Z,1513213194.279 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0013.lzma.bak
2017-12-14T00:59:54.279Z,1513213194.279 [DataOverHttps](INFO): SBD MOMSN=5437281
2017-12-14T00:59:54.338Z,1513213194.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:54.496Z,1513213194.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:55.290Z,1513213195.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:55.540Z,1513213195.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:55.543Z,1513213195.543 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T00:59:55.543Z,1513213195.543 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T00:59:55.543Z,1513213195.543 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T00:59:55.691Z,1513213195.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:55.693Z,1513213195.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:56.489Z,1513213196.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:57.285Z,1513213197.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:58.081Z,1513213198.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:58.529Z,1513213198.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:59.325Z,1513213199.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:59.411Z,1513213199.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:59.531Z,1513213199.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T00:59:59.729Z,1513213199.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T00:59:59.887Z,1513213199.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:00.314Z,1513213200.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:00.525Z,1513213200.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:00.688Z,1513213200.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:01.090Z,1513213201.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:01.321Z,1513213201.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:01.492Z,1513213201.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:01.725Z,1513213201.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:01.895Z,1513213201.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:02.294Z,1513213202.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:02.521Z,1513213202.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:02.688Z,1513213202.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:03.083Z,1513213203.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:03.319Z,1513213203.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:03.495Z,1513213203.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:03.721Z,1513213203.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:03.903Z,1513213203.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:04.312Z,1513213204.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:04.517Z,1513213204.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:04.694Z,1513213204.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:05.096Z,1513213205.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:05.313Z,1513213205.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:05.499Z,1513213205.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:05.717Z,1513213205.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:05.902Z,1513213205.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:06.302Z,1513213206.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:06.513Z,1513213206.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:06.703Z,1513213206.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:07.098Z,1513213207.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:07.309Z,1513213207.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:07.552Z,1513213207.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:07.713Z,1513213207.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:07.908Z,1513213207.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:08.303Z,1513213208.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:08.509Z,1513213208.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:08.712Z,1513213208.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:09.100Z,1513213209.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:09.305Z,1513213209.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:09.496Z,1513213209.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:09.709Z,1513213209.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:09.905Z,1513213209.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:10.298Z,1513213210.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:10.505Z,1513213210.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:10.722Z,1513213210.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:11.101Z,1513213211.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:11.302Z,1513213211.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:11.542Z,1513213211.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:11.705Z,1513213211.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:11.888Z,1513213211.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:12.327Z,1513213212.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:12.501Z,1513213212.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:12.711Z,1513213212.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:13.107Z,1513213213.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:13.298Z,1513213213.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:13.484Z,1513213213.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:13.701Z,1513213213.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:13.967Z,1513213213.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:14.288Z,1513213214.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:14.497Z,1513213214.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:14.688Z,1513213214.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:15.091Z,1513213215.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:15.295Z,1513213215.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:15.511Z,1513213215.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:15.697Z,1513213215.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:15.895Z,1513213215.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:16.293Z,1513213216.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:16.494Z,1513213216.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:16.688Z,1513213216.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:17.109Z,1513213217.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:17.289Z,1513213217.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:17.491Z,1513213217.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:17.693Z,1513213217.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:17.889Z,1513213217.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:18.289Z,1513213218.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:18.489Z,1513213218.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:18.690Z,1513213218.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:19.119Z,1513213219.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:19.285Z,1513213219.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:19.482Z,1513213219.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:19.689Z,1513213219.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:19.894Z,1513213219.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:20.370Z,1513213220.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:20.485Z,1513213220.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:20.692Z,1513213220.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:21.087Z,1513213221.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:21.281Z,1513213221.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:21.515Z,1513213221.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:21.685Z,1513213221.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:21.892Z,1513213221.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:22.299Z,1513213222.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:22.481Z,1513213222.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:22.793Z,1513213222.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:23.087Z,1513213223.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:23.277Z,1513213223.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:23.497Z,1513213223.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:23.681Z,1513213223.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:23.892Z,1513213223.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:24.287Z,1513213224.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:24.477Z,1513213224.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:24.702Z,1513213224.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:25.102Z,1513213225.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:25.275Z,1513213225.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:25.525Z,1513213225.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:25.693Z,1513213225.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:25.895Z,1513213225.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:26.287Z,1513213226.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:26.489Z,1513213226.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:26.730Z,1513213226.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:27.091Z,1513213227.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:27.286Z,1513213227.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:27.489Z,1513213227.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:27.721Z,1513213227.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:27.888Z,1513213227.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:28.315Z,1513213228.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:28.517Z,1513213228.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:28.694Z,1513213228.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:29.118Z,1513213229.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:29.314Z,1513213229.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:29.491Z,1513213229.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:29.717Z,1513213229.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:29.972Z,1513213229.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:30.288Z,1513213230.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:30.514Z,1513213230.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:30.688Z,1513213230.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:31.090Z,1513213231.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:31.309Z,1513213231.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:31.495Z,1513213231.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:31.714Z,1513213231.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:31.924Z,1513213231.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:32.294Z,1513213232.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:32.509Z,1513213232.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:32.692Z,1513213232.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:33.156Z,1513213233.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:33.305Z,1513213233.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:33.535Z,1513213233.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:33.709Z,1513213233.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:33.897Z,1513213233.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:34.337Z,1513213234.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:34.505Z,1513213234.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:34.698Z,1513213234.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:35.107Z,1513213235.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:35.301Z,1513213235.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:35.489Z,1513213235.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:35.705Z,1513213235.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:35.897Z,1513213235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:36.394Z,1513213236.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:36.502Z,1513213236.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:36.692Z,1513213236.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:37.078Z,1513213237.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:37.297Z,1513213237.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:37.484Z,1513213237.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:37.701Z,1513213237.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:37.908Z,1513213237.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:38.327Z,1513213238.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:38.497Z,1513213238.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:38.684Z,1513213238.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:39.084Z,1513213239.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:39.294Z,1513213239.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:39.606Z,1513213239.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:39.721Z,1513213239.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:39.899Z,1513213239.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:40.304Z,1513213240.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:40.517Z,1513213240.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:40.696Z,1513213240.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:41.085Z,1513213241.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:41.313Z,1513213241.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:41.491Z,1513213241.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:41.717Z,1513213241.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:41.896Z,1513213241.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:42.295Z,1513213242.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:42.513Z,1513213242.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:42.725Z,1513213242.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:43.094Z,1513213243.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:43.309Z,1513213243.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:43.526Z,1513213243.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:43.713Z,1513213243.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:43.893Z,1513213243.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:44.298Z,1513213244.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:44.509Z,1513213244.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:44.693Z,1513213244.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:45.083Z,1513213245.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:45.305Z,1513213245.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:45.491Z,1513213245.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:45.709Z,1513213245.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:45.907Z,1513213245.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:46.295Z,1513213246.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:46.505Z,1513213246.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:46.703Z,1513213246.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:47.079Z,1513213247.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:47.301Z,1513213247.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:47.479Z,1513213247.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:47.705Z,1513213247.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:47.927Z,1513213247.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:48.303Z,1513213248.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:48.501Z,1513213248.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:48.706Z,1513213248.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:49.159Z,1513213249.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:49.297Z,1513213249.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:49.482Z,1513213249.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:49.701Z,1513213249.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:49.916Z,1513213249.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:50.302Z,1513213250.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:50.497Z,1513213250.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:50.702Z,1513213250.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:51.103Z,1513213251.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:51.293Z,1513213251.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:51.487Z,1513213251.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:51.697Z,1513213251.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:51.955Z,1513213251.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:52.335Z,1513213252.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:52.495Z,1513213252.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:52.710Z,1513213252.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:53.091Z,1513213253.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:53.290Z,1513213253.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:53.489Z,1513213253.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:53.693Z,1513213253.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:53.894Z,1513213253.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:54.290Z,1513213254.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:54.489Z,1513213254.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:54.688Z,1513213254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:55.091Z,1513213255.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:55.286Z,1513213255.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:55.580Z,1513213255.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:55.698Z,1513213255.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:55.943Z,1513213255.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:56.303Z,1513213256.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:00:56.493Z,1513213256.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:57.289Z,1513213257.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:57.693Z,1513213257.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:58.489Z,1513213258.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:59.285Z,1513213259.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:59.689Z,1513213259.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:00:59.947Z,1513213259.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:00.086Z,1513213260.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:00.440Z,1513213260.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:00.485Z,1513213260.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:00.838Z,1513213260.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:01.246Z,1513213261.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:01.281Z,1513213261.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:01.620Z,1513213261.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:01.685Z,1513213261.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:01.994Z,1513213261.994 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:01:01.995Z,1513213261.995 [NAL9602] Data Fault, FailCount= 3
2017-12-14T01:01:01.995Z,1513213261.995 [NAL9602](ERROR): Data Fault
2017-12-14T01:01:02.051Z,1513213262.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:02.081Z,1513213262.081 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:01:02.380Z,1513213262.380 [NAL9602](INFO): Powering down
2017-12-14T01:01:02.427Z,1513213262.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:02.481Z,1513213262.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:02.820Z,1513213262.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:03.247Z,1513213263.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:03.260Z,1513213263.260 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:01:03.260Z,1513213263.260 [NAL9602] No Fault, FailCount= 3
2017-12-14T01:01:03.277Z,1513213263.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:03.623Z,1513213263.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:03.681Z,1513213263.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:04.017Z,1513213264.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:04.423Z,1513213264.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:04.477Z,1513213264.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:04.823Z,1513213264.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:05.219Z,1513213265.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:05.273Z,1513213265.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:05.622Z,1513213265.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:05.677Z,1513213265.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:06.022Z,1513213266.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:06.421Z,1513213266.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:06.473Z,1513213266.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:06.817Z,1513213266.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:07.271Z,1513213267.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:07.311Z,1513213267.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:07.619Z,1513213267.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:07.782Z,1513213267.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:08.027Z,1513213268.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:08.457Z,1513213268.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:08.581Z,1513213268.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:08.859Z,1513213268.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:09.217Z,1513213269.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:09.377Z,1513213269.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:09.627Z,1513213269.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:09.785Z,1513213269.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:10.021Z,1513213270.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:10.423Z,1513213270.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:10.581Z,1513213270.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:10.819Z,1513213270.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:11.222Z,1513213271.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:11.357Z,1513213271.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:11.618Z,1513213271.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:12.022Z,1513213272.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:12.154Z,1513213272.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:12.422Z,1513213272.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:12.822Z,1513213272.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:12.950Z,1513213272.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:13.231Z,1513213273.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:13.363Z,1513213273.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:13.608Z,1513213273.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:14.006Z,1513213274.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:14.157Z,1513213274.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:14.416Z,1513213274.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:14.815Z,1513213274.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:14.954Z,1513213274.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:15.221Z,1513213275.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:15.362Z,1513213275.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:15.626Z,1513213275.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:16.027Z,1513213276.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:16.157Z,1513213276.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:16.439Z,1513213276.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:16.833Z,1513213276.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:16.955Z,1513213276.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:17.260Z,1513213277.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:17.421Z,1513213277.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:17.659Z,1513213277.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:18.043Z,1513213278.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:18.218Z,1513213278.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:18.445Z,1513213278.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:18.819Z,1513213278.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:19.014Z,1513213279.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:19.249Z,1513213279.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:19.449Z,1513213279.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:19.667Z,1513213279.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:20.070Z,1513213280.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:20.246Z,1513213280.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:20.451Z,1513213280.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:20.898Z,1513213280.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:21.042Z,1513213281.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:21.329Z,1513213281.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:21.674Z,1513213281.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:21.785Z,1513213281.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:22.032Z,1513213282.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:22.466Z,1513213282.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:22.581Z,1513213282.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:22.823Z,1513213282.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:23.327Z,1513213283.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:23.377Z,1513213283.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:23.607Z,1513213283.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:23.783Z,1513213283.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:24.042Z,1513213284.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:24.436Z,1513213284.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:24.849Z,1513213284.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:25.271Z,1513213285.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:25.646Z,1513213285.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:26.018Z,1513213286.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:26.420Z,1513213286.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:26.859Z,1513213286.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:27.237Z,1513213287.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:27.733Z,1513213287.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:28.035Z,1513213288.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:28.459Z,1513213288.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:28.848Z,1513213288.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:29.250Z,1513213289.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:29.639Z,1513213289.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:30.083Z,1513213290.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:30.450Z,1513213290.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:30.895Z,1513213290.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:31.294Z,1513213291.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:31.643Z,1513213291.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:32.042Z,1513213292.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:32.431Z,1513213292.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:32.782Z,1513213292.782 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:01:32.814Z,1513213292.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:33.225Z,1513213293.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:33.633Z,1513213293.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:34.086Z,1513213294.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:34.498Z,1513213294.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:34.566Z,1513213294.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:34.820Z,1513213294.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:35.303Z,1513213295.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:35.361Z,1513213295.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:35.619Z,1513213295.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:35.766Z,1513213295.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:36.030Z,1513213296.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:36.423Z,1513213296.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:36.821Z,1513213296.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:37.287Z,1513213297.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:37.649Z,1513213297.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:38.036Z,1513213298.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:38.426Z,1513213298.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:38.816Z,1513213298.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:39.217Z,1513213299.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:39.618Z,1513213299.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:40.021Z,1513213300.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:40.417Z,1513213300.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:40.910Z,1513213300.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:41.230Z,1513213301.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:41.618Z,1513213301.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:42.019Z,1513213302.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:42.427Z,1513213302.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:42.934Z,1513213302.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:43.230Z,1513213303.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:43.655Z,1513213303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:43.978Z,1513213303.978 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:01:44.027Z,1513213304.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:44.453Z,1513213304.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:44.838Z,1513213304.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:45.240Z,1513213305.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:45.627Z,1513213305.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:46.019Z,1513213306.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:46.201Z,1513213306.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:46.420Z,1513213306.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:46.819Z,1513213306.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:46.998Z,1513213306.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:47.279Z,1513213307.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:47.401Z,1513213307.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:47.626Z,1513213307.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:48.053Z,1513213308.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:48.197Z,1513213308.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:48.423Z,1513213308.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:48.816Z,1513213308.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:48.993Z,1513213308.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:49.296Z,1513213309.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:49.621Z,1513213309.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:49.717Z,1513213309.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:50.020Z,1513213310.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:50.447Z,1513213310.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:50.514Z,1513213310.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:01:50.832Z,1513213310.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:51.314Z,1513213311.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:51.619Z,1513213311.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:52.024Z,1513213312.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:52.448Z,1513213312.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:52.852Z,1513213312.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:53.234Z,1513213313.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:53.663Z,1513213313.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:54.064Z,1513213314.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:54.421Z,1513213314.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:54.827Z,1513213314.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:55.232Z,1513213315.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:55.630Z,1513213315.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:56.039Z,1513213316.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:56.445Z,1513213316.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:01:59.991Z,1513213319.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:00.187Z,1513213320.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:00.460Z,1513213320.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:00.868Z,1513213320.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:01.275Z,1513213321.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:01.671Z,1513213321.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:02.082Z,1513213322.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:02.476Z,1513213322.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:02.880Z,1513213322.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:03.383Z,1513213323.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:03.683Z,1513213323.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:04.122Z,1513213324.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:04.507Z,1513213324.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:04.909Z,1513213324.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:05.324Z,1513213325.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:05.702Z,1513213325.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:06.079Z,1513213326.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:06.571Z,1513213326.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:06.571Z,1513213326.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2017-12-14T01:02:06.571Z,1513213326.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:02:06.577Z,1513213326.577 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:06.577Z,1513213326.577 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2017-12-14T01:02:06.577Z,1513213326.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:02:06.579Z,1513213326.579 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:06.579Z,1513213326.579 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-12-14T01:02:06.579Z,1513213326.579 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:02:06.604Z,1513213326.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:02:06.630Z,1513213326.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:02:06.630Z,1513213326.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:02:06.948Z,1513213326.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:02:06.948Z,1513213326.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2017-12-14T01:02:06.949Z,1513213326.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:02:06.949Z,1513213326.949 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2017-12-14T01:02:06.949Z,1513213326.949 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:02:06.949Z,1513213326.949 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-12-14T01:02:07.270Z,1513213327.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:02:07.270Z,1513213327.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:02:07.270Z,1513213327.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:02:07.271Z,1513213327.271 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:02:07.271Z,1513213327.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:02:07.272Z,1513213327.272 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:02:07.272Z,1513213327.272 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:02:07.272Z,1513213327.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:02:07.277Z,1513213327.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:02:07.662Z,1513213327.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:08.075Z,1513213328.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:08.476Z,1513213328.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:08.953Z,1513213328.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:09.275Z,1513213329.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:09.675Z,1513213329.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:10.099Z,1513213330.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:10.481Z,1513213330.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:10.851Z,1513213330.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:11.283Z,1513213331.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:11.684Z,1513213331.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:12.086Z,1513213332.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:12.464Z,1513213332.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:12.973Z,1513213332.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:13.264Z,1513213333.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:13.710Z,1513213333.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:14.072Z,1513213334.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:14.473Z,1513213334.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:14.903Z,1513213334.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:15.270Z,1513213335.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:15.670Z,1513213335.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:16.066Z,1513213336.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:16.475Z,1513213336.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:16.860Z,1513213336.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:17.339Z,1513213337.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:17.679Z,1513213337.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:18.144Z,1513213338.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:18.468Z,1513213338.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:18.871Z,1513213338.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:19.396Z,1513213339.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:19.680Z,1513213339.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:20.083Z,1513213340.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:20.483Z,1513213340.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:20.978Z,1513213340.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:21.247Z,1513213341.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:21.680Z,1513213341.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:22.080Z,1513213342.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:22.458Z,1513213342.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:22.936Z,1513213342.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:23.287Z,1513213343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:23.680Z,1513213343.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:24.075Z,1513213344.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:24.475Z,1513213344.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:24.913Z,1513213344.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:25.275Z,1513213345.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:25.700Z,1513213345.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:26.070Z,1513213346.070 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:02:26.071Z,1513213346.071 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:02:26.071Z,1513213346.071 [BPC1](ERROR): Data Fault
2017-12-14T01:02:26.079Z,1513213346.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:26.128Z,1513213346.128 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:02:26.463Z,1513213346.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:26.867Z,1513213346.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:27.267Z,1513213347.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:27.280Z,1513213347.280 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:02:27.280Z,1513213347.280 [BPC1] No Fault, FailCount= 1
2017-12-14T01:02:27.723Z,1513213347.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:28.076Z,1513213348.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:28.477Z,1513213348.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:28.908Z,1513213348.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:29.263Z,1513213349.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:29.672Z,1513213349.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:30.064Z,1513213350.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:30.462Z,1513213350.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:30.862Z,1513213350.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:31.312Z,1513213351.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:31.683Z,1513213351.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:32.086Z,1513213352.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:32.474Z,1513213352.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:32.876Z,1513213352.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:33.335Z,1513213353.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:33.679Z,1513213353.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:34.081Z,1513213354.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:34.481Z,1513213354.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:34.860Z,1513213354.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:35.322Z,1513213355.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:35.664Z,1513213355.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:36.091Z,1513213356.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:36.469Z,1513213356.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:36.869Z,1513213356.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:37.264Z,1513213357.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:37.668Z,1513213357.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:38.088Z,1513213358.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:38.498Z,1513213358.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:38.927Z,1513213358.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:39.275Z,1513213359.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:39.672Z,1513213359.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:40.076Z,1513213360.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:40.486Z,1513213360.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:40.945Z,1513213360.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:41.299Z,1513213361.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:41.698Z,1513213361.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:42.083Z,1513213362.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:42.458Z,1513213362.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:42.865Z,1513213362.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:43.295Z,1513213363.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:43.668Z,1513213363.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:44.095Z,1513213364.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:44.459Z,1513213364.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:44.902Z,1513213364.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:45.343Z,1513213365.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:45.669Z,1513213365.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:46.079Z,1513213366.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:46.482Z,1513213366.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:46.883Z,1513213366.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:47.327Z,1513213367.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:47.670Z,1513213367.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:48.198Z,1513213368.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:48.479Z,1513213368.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:48.945Z,1513213368.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:49.272Z,1513213369.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:49.702Z,1513213369.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:50.075Z,1513213370.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:50.464Z,1513213370.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:50.862Z,1513213370.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:51.308Z,1513213371.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:51.660Z,1513213371.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:52.068Z,1513213372.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:52.492Z,1513213372.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:52.864Z,1513213372.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:53.270Z,1513213373.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:53.669Z,1513213373.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:54.070Z,1513213374.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:54.498Z,1513213374.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:54.868Z,1513213374.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:55.276Z,1513213375.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:55.687Z,1513213375.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:56.086Z,1513213376.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:56.456Z,1513213376.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:02:59.982Z,1513213379.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:00.123Z,1513213380.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:00.479Z,1513213380.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:00.902Z,1513213380.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:01.306Z,1513213381.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:01.652Z,1513213381.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:02.047Z,1513213382.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:02.454Z,1513213382.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:02.852Z,1513213382.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:03.274Z,1513213383.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:03.667Z,1513213383.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:04.097Z,1513213384.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:04.451Z,1513213384.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:04.856Z,1513213384.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:05.274Z,1513213385.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:05.663Z,1513213385.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:06.059Z,1513213386.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:06.456Z,1513213386.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:06.854Z,1513213386.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:07.303Z,1513213387.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:07.680Z,1513213387.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:08.062Z,1513213388.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:08.452Z,1513213388.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:08.847Z,1513213388.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:09.262Z,1513213389.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:09.664Z,1513213389.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:10.060Z,1513213390.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:10.508Z,1513213390.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:10.867Z,1513213390.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:11.305Z,1513213391.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:11.663Z,1513213391.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:12.098Z,1513213392.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:12.458Z,1513213392.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:12.892Z,1513213392.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:13.327Z,1513213393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:13.728Z,1513213393.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:14.080Z,1513213394.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:14.451Z,1513213394.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:14.855Z,1513213394.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:15.361Z,1513213395.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:15.653Z,1513213395.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:16.068Z,1513213396.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:16.459Z,1513213396.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:16.968Z,1513213396.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:17.274Z,1513213397.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:17.648Z,1513213397.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:18.046Z,1513213398.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:18.446Z,1513213398.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:18.837Z,1513213398.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:19.273Z,1513213399.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:19.663Z,1513213399.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:20.056Z,1513213400.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:20.456Z,1513213400.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:20.850Z,1513213400.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:21.262Z,1513213401.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:21.660Z,1513213401.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:22.098Z,1513213402.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:22.468Z,1513213402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:22.865Z,1513213402.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:23.330Z,1513213403.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:23.672Z,1513213403.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:24.066Z,1513213404.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:24.447Z,1513213404.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:24.849Z,1513213404.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:25.267Z,1513213405.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:25.668Z,1513213405.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:26.072Z,1513213406.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:26.491Z,1513213406.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:26.852Z,1513213406.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:27.324Z,1513213407.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:27.653Z,1513213407.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:28.062Z,1513213408.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:28.467Z,1513213408.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:28.863Z,1513213408.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:29.305Z,1513213409.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:29.674Z,1513213409.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:30.061Z,1513213410.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:30.464Z,1513213410.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:30.854Z,1513213410.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:31.268Z,1513213411.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:31.665Z,1513213411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:32.074Z,1513213412.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:32.460Z,1513213412.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:33.013Z,1513213413.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:33.258Z,1513213413.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:33.654Z,1513213413.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:34.127Z,1513213414.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:34.467Z,1513213414.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:34.940Z,1513213414.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:35.253Z,1513213415.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:35.674Z,1513213415.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:36.055Z,1513213416.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:36.459Z,1513213416.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:36.852Z,1513213416.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:37.268Z,1513213417.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:37.671Z,1513213417.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:38.076Z,1513213418.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:38.458Z,1513213418.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:38.860Z,1513213418.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:39.318Z,1513213419.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:39.662Z,1513213419.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:40.068Z,1513213420.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:40.471Z,1513213420.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:40.868Z,1513213420.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:41.344Z,1513213421.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:41.646Z,1513213421.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:42.043Z,1513213422.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:42.482Z,1513213422.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:42.851Z,1513213422.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:43.314Z,1513213423.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:43.671Z,1513213423.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:44.092Z,1513213424.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:44.466Z,1513213424.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:44.867Z,1513213424.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:45.261Z,1513213425.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:45.696Z,1513213425.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:46.068Z,1513213426.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:46.463Z,1513213426.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:46.860Z,1513213426.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:47.264Z,1513213427.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:47.663Z,1513213427.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:48.043Z,1513213428.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:48.471Z,1513213428.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:48.980Z,1513213428.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:49.269Z,1513213429.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:49.670Z,1513213429.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:50.068Z,1513213430.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:50.452Z,1513213430.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:50.851Z,1513213430.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:51.252Z,1513213431.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:51.658Z,1513213431.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:52.068Z,1513213432.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:52.469Z,1513213432.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:52.861Z,1513213432.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:53.250Z,1513213433.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:53.651Z,1513213433.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:54.053Z,1513213434.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:54.462Z,1513213434.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:54.871Z,1513213434.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:55.340Z,1513213435.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:55.671Z,1513213435.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:56.092Z,1513213436.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:56.462Z,1513213436.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:03:56.867Z,1513213436.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:00.368Z,1513213440.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:00.506Z,1513213440.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:00.935Z,1513213440.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:01.263Z,1513213441.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:01.659Z,1513213441.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:02.059Z,1513213442.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:02.433Z,1513213442.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:02.856Z,1513213442.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:03.267Z,1513213443.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:03.661Z,1513213443.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:04.036Z,1513213444.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:04.439Z,1513213444.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:04.843Z,1513213444.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:05.263Z,1513213445.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:05.656Z,1513213445.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:06.039Z,1513213446.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:06.445Z,1513213446.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:06.841Z,1513213446.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:07.254Z,1513213447.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:07.653Z,1513213447.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:08.049Z,1513213448.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:08.445Z,1513213448.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:08.843Z,1513213448.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:09.350Z,1513213449.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:09.646Z,1513213449.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:10.059Z,1513213450.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:10.459Z,1513213450.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:10.859Z,1513213450.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:11.330Z,1513213451.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:11.639Z,1513213451.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:12.062Z,1513213452.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:12.442Z,1513213452.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:12.840Z,1513213452.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:13.258Z,1513213453.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:13.664Z,1513213453.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:14.055Z,1513213454.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:14.454Z,1513213454.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:14.848Z,1513213454.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:15.259Z,1513213455.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:15.658Z,1513213455.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:16.059Z,1513213456.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:16.463Z,1513213456.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:16.867Z,1513213456.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:17.244Z,1513213457.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:17.695Z,1513213457.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:18.043Z,1513213458.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:18.442Z,1513213458.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:18.871Z,1513213458.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:19.263Z,1513213459.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:19.660Z,1513213459.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:20.083Z,1513213460.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:20.450Z,1513213460.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:20.864Z,1513213460.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:21.290Z,1513213461.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:21.643Z,1513213461.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:22.083Z,1513213462.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:22.459Z,1513213462.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:22.875Z,1513213462.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:23.322Z,1513213463.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:23.654Z,1513213463.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:24.128Z,1513213464.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:24.439Z,1513213464.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:24.837Z,1513213464.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:25.326Z,1513213465.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:25.644Z,1513213465.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:26.051Z,1513213466.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:26.441Z,1513213466.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:26.834Z,1513213466.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:27.287Z,1513213467.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:27.650Z,1513213467.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:28.049Z,1513213468.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:28.463Z,1513213468.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:28.854Z,1513213468.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:29.242Z,1513213469.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:29.650Z,1513213469.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:30.047Z,1513213470.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:30.478Z,1513213470.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:30.852Z,1513213470.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:31.290Z,1513213471.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:31.663Z,1513213471.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:32.044Z,1513213472.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:32.435Z,1513213472.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:32.836Z,1513213472.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:33.239Z,1513213473.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:33.698Z,1513213473.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:34.049Z,1513213474.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:34.452Z,1513213474.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:34.859Z,1513213474.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:35.240Z,1513213475.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:35.647Z,1513213475.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:36.043Z,1513213476.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:36.451Z,1513213476.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:36.859Z,1513213476.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:37.296Z,1513213477.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:37.651Z,1513213477.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:38.045Z,1513213478.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:38.447Z,1513213478.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:38.842Z,1513213478.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:39.303Z,1513213479.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:39.644Z,1513213479.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:40.083Z,1513213480.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:40.459Z,1513213480.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:40.852Z,1513213480.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:41.249Z,1513213481.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:41.643Z,1513213481.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:42.035Z,1513213482.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:42.486Z,1513213482.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:42.847Z,1513213482.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:43.267Z,1513213483.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:43.653Z,1513213483.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:44.088Z,1513213484.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:44.450Z,1513213484.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:44.851Z,1513213484.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:45.236Z,1513213485.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:45.635Z,1513213485.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:46.055Z,1513213486.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:46.503Z,1513213486.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:46.866Z,1513213486.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:47.236Z,1513213487.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:47.642Z,1513213487.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:48.039Z,1513213488.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:48.463Z,1513213488.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:48.847Z,1513213488.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:49.245Z,1513213489.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:49.676Z,1513213489.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:50.055Z,1513213490.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:50.442Z,1513213490.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:50.837Z,1513213490.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:51.312Z,1513213491.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:51.650Z,1513213491.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:52.063Z,1513213492.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:52.463Z,1513213492.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:52.904Z,1513213492.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:53.299Z,1513213493.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:53.656Z,1513213493.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:54.075Z,1513213494.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:54.459Z,1513213494.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:54.839Z,1513213494.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:55.255Z,1513213495.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:55.660Z,1513213495.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:56.082Z,1513213496.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:56.089Z,1513213496.089 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:04:56.090Z,1513213496.090 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:04:56.090Z,1513213496.090 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:04:56.090Z,1513213496.090 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:04:56.441Z,1513213496.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:56.444Z,1513213496.444 [Default:CheckIn:D] Stopped
2017-12-14T01:04:56.444Z,1513213496.444 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:04:56.847Z,1513213496.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:04:56.851Z,1513213496.851 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.684233 min 
2017-12-14T01:04:56.851Z,1513213496.851 [Default:CheckIn:E] Stopped
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn] Stopped
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn](INFO): Running loop #4
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn] Running Loop=4
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:04:56.852Z,1513213496.852 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:04:57.262Z,1513213497.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:00.719Z,1513213500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:00.941Z,1513213500.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:01.237Z,1513213501.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:01.663Z,1513213501.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:02.025Z,1513213502.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:02.428Z,1513213502.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:02.837Z,1513213502.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:03.238Z,1513213503.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:03.640Z,1513213503.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:04.047Z,1513213504.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:04.429Z,1513213504.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:04.841Z,1513213504.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:05.281Z,1513213505.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:05.655Z,1513213505.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:06.037Z,1513213506.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:06.443Z,1513213506.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:06.832Z,1513213506.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:07.317Z,1513213507.317 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:07.317Z,1513213507.317 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2017-12-14T01:05:07.317Z,1513213507.317 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:05:07.319Z,1513213507.319 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:07.319Z,1513213507.319 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2017-12-14T01:05:07.319Z,1513213507.319 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:05:07.327Z,1513213507.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:07.327Z,1513213507.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-12-14T01:05:07.327Z,1513213507.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:05:07.366Z,1513213507.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:05:07.366Z,1513213507.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:05:07.367Z,1513213507.367 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:05:07.646Z,1513213507.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:05:07.646Z,1513213507.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2017-12-14T01:05:07.646Z,1513213507.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:05:07.646Z,1513213507.646 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2017-12-14T01:05:07.647Z,1513213507.647 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:05:07.647Z,1513213507.647 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-12-14T01:05:08.010Z,1513213508.010 [BPC1](ERROR): Failed to receive battery data
2017-12-14T01:05:08.010Z,1513213508.010 [BPC1] Communications Fault, FailCount= 1
2017-12-14T01:05:08.010Z,1513213508.010 [BPC1](ERROR): Communications Fault
2017-12-14T01:05:08.016Z,1513213508.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:05:08.037Z,1513213508.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:05:08.037Z,1513213508.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:05:08.038Z,1513213508.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:05:08.038Z,1513213508.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:05:08.038Z,1513213508.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:05:08.039Z,1513213508.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:05:08.039Z,1513213508.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:05:08.039Z,1513213508.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:05:08.063Z,1513213508.063 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T01:05:08.438Z,1513213508.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:08.973Z,1513213508.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:09.236Z,1513213509.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:09.266Z,1513213509.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:05:09.266Z,1513213509.266 [BPC1] No Fault, FailCount= 1
2017-12-14T01:05:09.707Z,1513213509.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:10.051Z,1513213510.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:10.443Z,1513213510.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:10.828Z,1513213510.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:11.235Z,1513213511.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:11.627Z,1513213511.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:12.036Z,1513213512.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:12.436Z,1513213512.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:12.838Z,1513213512.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:13.227Z,1513213513.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:13.631Z,1513213513.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:14.032Z,1513213514.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:14.434Z,1513213514.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:14.829Z,1513213514.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:15.265Z,1513213515.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:15.663Z,1513213515.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:16.050Z,1513213516.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:16.420Z,1513213516.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:16.824Z,1513213516.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:17.224Z,1513213517.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:17.647Z,1513213517.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:18.071Z,1513213518.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:18.507Z,1513213518.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:18.849Z,1513213518.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:19.301Z,1513213519.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:19.632Z,1513213519.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:20.029Z,1513213520.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:20.430Z,1513213520.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:20.844Z,1513213520.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:21.295Z,1513213521.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:21.664Z,1513213521.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:22.042Z,1513213522.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:22.418Z,1513213522.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:22.824Z,1513213522.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:23.236Z,1513213523.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:23.628Z,1513213523.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:24.039Z,1513213524.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:24.454Z,1513213524.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:24.932Z,1513213524.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:25.244Z,1513213525.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:25.623Z,1513213525.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:26.024Z,1513213526.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:26.424Z,1513213526.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:26.855Z,1513213526.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:27.235Z,1513213527.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:27.639Z,1513213527.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:28.030Z,1513213528.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:28.432Z,1513213528.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:28.891Z,1513213528.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:29.247Z,1513213529.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:29.651Z,1513213529.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:30.086Z,1513213530.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:30.420Z,1513213530.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:30.859Z,1513213530.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:31.247Z,1513213531.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:31.621Z,1513213531.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:32.093Z,1513213532.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:32.462Z,1513213532.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:32.849Z,1513213532.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:33.303Z,1513213533.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:33.628Z,1513213533.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:34.031Z,1513213534.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:34.432Z,1513213534.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:34.835Z,1513213534.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:35.323Z,1513213535.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:35.639Z,1513213535.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:36.026Z,1513213536.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:36.439Z,1513213536.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:36.834Z,1513213536.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:37.240Z,1513213537.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:37.647Z,1513213537.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:38.041Z,1513213538.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:38.430Z,1513213538.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:38.839Z,1513213538.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:39.251Z,1513213539.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:39.628Z,1513213539.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:40.048Z,1513213540.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:40.451Z,1513213540.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:40.846Z,1513213540.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:41.232Z,1513213541.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:41.671Z,1513213541.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:42.035Z,1513213542.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:42.430Z,1513213542.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:42.824Z,1513213542.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:43.244Z,1513213543.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:43.650Z,1513213543.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:44.040Z,1513213544.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:44.429Z,1513213544.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:44.888Z,1513213544.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:45.229Z,1513213545.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:45.628Z,1513213545.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:46.055Z,1513213546.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:46.454Z,1513213546.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:46.857Z,1513213546.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:47.300Z,1513213547.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:47.627Z,1513213547.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:48.031Z,1513213548.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:48.428Z,1513213548.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:48.827Z,1513213548.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:49.319Z,1513213549.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:49.690Z,1513213549.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:50.047Z,1513213550.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:50.435Z,1513213550.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:50.830Z,1513213550.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:51.299Z,1513213551.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:51.631Z,1513213551.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:52.054Z,1513213552.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:52.471Z,1513213552.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:52.853Z,1513213552.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:53.278Z,1513213553.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:53.631Z,1513213553.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:54.031Z,1513213554.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:54.450Z,1513213554.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:54.828Z,1513213554.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:55.246Z,1513213555.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:55.648Z,1513213555.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:56.044Z,1513213556.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:56.436Z,1513213556.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:56.839Z,1513213556.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:57.246Z,1513213557.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:05:57.654Z,1513213557.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:01.107Z,1513213561.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:01.346Z,1513213561.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:01.605Z,1513213561.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:01.980Z,1513213561.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:02.387Z,1513213562.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:02.781Z,1513213562.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:03.286Z,1513213563.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:03.611Z,1513213563.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:03.982Z,1513213563.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:04.371Z,1513213564.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:04.795Z,1513213564.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:05.194Z,1513213565.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:05.602Z,1513213565.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:06.003Z,1513213566.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:06.399Z,1513213566.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:06.807Z,1513213566.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:07.237Z,1513213567.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:07.570Z,1513213567.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:07.978Z,1513213567.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:08.380Z,1513213568.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:08.776Z,1513213568.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:09.210Z,1513213569.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:09.604Z,1513213569.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:10.008Z,1513213570.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:10.455Z,1513213570.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:10.788Z,1513213570.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:11.187Z,1513213571.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:11.570Z,1513213571.570 [BPC1](ERROR): Failed to parse message.
2017-12-14T01:06:11.570Z,1513213571.570 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:06:11.570Z,1513213571.570 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:06:11.570Z,1513213571.570 [BPC1](ERROR): Data Fault
2017-12-14T01:06:11.599Z,1513213571.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:11.629Z,1513213571.629 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:06:11.995Z,1513213571.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:12.392Z,1513213572.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:12.798Z,1513213572.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:12.810Z,1513213572.810 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:06:12.810Z,1513213572.810 [BPC1] No Fault, FailCount= 1
2017-12-14T01:06:13.231Z,1513213573.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:13.635Z,1513213573.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:13.988Z,1513213573.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:14.379Z,1513213574.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:14.788Z,1513213574.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:15.199Z,1513213575.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:15.603Z,1513213575.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:15.998Z,1513213575.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:16.371Z,1513213576.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:16.772Z,1513213576.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:17.199Z,1513213577.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:17.579Z,1513213577.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:18.002Z,1513213578.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:18.399Z,1513213578.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:18.802Z,1513213578.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:19.180Z,1513213579.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:19.581Z,1513213579.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:19.979Z,1513213579.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:20.376Z,1513213580.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:20.815Z,1513213580.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:21.218Z,1513213581.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:21.619Z,1513213581.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:21.987Z,1513213581.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:22.387Z,1513213582.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:22.814Z,1513213582.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:23.200Z,1513213583.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:23.596Z,1513213583.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:24.083Z,1513213584.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:24.402Z,1513213584.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:24.811Z,1513213584.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:25.176Z,1513213585.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:25.584Z,1513213585.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:25.987Z,1513213585.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:26.457Z,1513213586.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:26.818Z,1513213586.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:27.219Z,1513213587.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:27.610Z,1513213587.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:28.013Z,1513213588.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:28.387Z,1513213588.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:28.783Z,1513213588.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:29.268Z,1513213589.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:29.590Z,1513213589.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:30.019Z,1513213590.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:30.439Z,1513213590.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:30.795Z,1513213590.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:31.309Z,1513213591.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:31.590Z,1513213591.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:32.004Z,1513213592.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:32.383Z,1513213592.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:32.923Z,1513213592.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:33.223Z,1513213593.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:33.623Z,1513213593.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:34.030Z,1513213594.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:34.415Z,1513213594.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:34.816Z,1513213594.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:35.251Z,1513213595.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:35.590Z,1513213595.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:35.983Z,1513213595.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:36.450Z,1513213596.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:36.833Z,1513213596.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:37.196Z,1513213597.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:37.629Z,1513213597.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:37.999Z,1513213597.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:38.396Z,1513213598.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:38.791Z,1513213598.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:39.194Z,1513213599.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:39.600Z,1513213599.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:39.999Z,1513213599.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:40.439Z,1513213600.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:40.850Z,1513213600.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:41.186Z,1513213601.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:41.584Z,1513213601.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:41.995Z,1513213601.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:42.399Z,1513213602.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:42.793Z,1513213602.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:43.190Z,1513213603.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:43.624Z,1513213603.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:44.046Z,1513213604.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:44.372Z,1513213604.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:44.773Z,1513213604.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:45.201Z,1513213605.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:45.607Z,1513213605.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:45.984Z,1513213605.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:46.377Z,1513213606.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:46.865Z,1513213606.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:47.187Z,1513213607.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:47.583Z,1513213607.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:48.003Z,1513213608.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:48.399Z,1513213608.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:48.802Z,1513213608.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:49.180Z,1513213609.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:49.583Z,1513213609.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:49.975Z,1513213609.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:50.387Z,1513213610.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:50.780Z,1513213610.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:51.184Z,1513213611.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:51.585Z,1513213611.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:52.011Z,1513213612.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:52.390Z,1513213612.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:52.781Z,1513213612.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:53.231Z,1513213613.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:53.587Z,1513213613.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:53.996Z,1513213613.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:54.438Z,1513213614.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:54.822Z,1513213614.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:55.239Z,1513213615.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:55.582Z,1513213615.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:55.991Z,1513213615.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:56.439Z,1513213616.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:56.789Z,1513213616.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:57.290Z,1513213617.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:57.619Z,1513213617.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:06:57.995Z,1513213617.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:02.472Z,1513213622.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:02.623Z,1513213622.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:03.152Z,1513213623.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:03.427Z,1513213623.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:03.857Z,1513213623.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:04.215Z,1513213624.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:04.618Z,1513213624.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:05.009Z,1513213625.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:05.461Z,1513213625.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:05.816Z,1513213625.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:06.224Z,1513213626.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:06.615Z,1513213626.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:07.020Z,1513213627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:07.421Z,1513213627.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:07.809Z,1513213627.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:08.207Z,1513213628.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:08.615Z,1513213628.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:09.048Z,1513213629.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:09.460Z,1513213629.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:09.814Z,1513213629.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:10.212Z,1513213630.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:10.606Z,1513213630.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:11.011Z,1513213631.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:11.405Z,1513213631.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:11.804Z,1513213631.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:12.217Z,1513213632.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:12.650Z,1513213632.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:13.031Z,1513213633.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:13.420Z,1513213633.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:13.805Z,1513213633.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:14.258Z,1513213634.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:14.611Z,1513213634.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:15.023Z,1513213635.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:15.419Z,1513213635.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:15.830Z,1513213635.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:16.231Z,1513213636.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:16.614Z,1513213636.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:17.011Z,1513213637.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:17.418Z,1513213637.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:17.842Z,1513213637.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:18.220Z,1513213638.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:18.662Z,1513213638.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:19.072Z,1513213639.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:19.459Z,1513213639.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:19.908Z,1513213639.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:20.216Z,1513213640.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:20.616Z,1513213640.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:21.020Z,1513213641.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:21.423Z,1513213641.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:21.818Z,1513213641.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:22.232Z,1513213642.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:22.604Z,1513213642.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:23.056Z,1513213643.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:23.404Z,1513213643.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:23.817Z,1513213643.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:24.219Z,1513213644.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:24.617Z,1513213644.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:25.009Z,1513213645.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:25.458Z,1513213645.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:25.808Z,1513213645.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:26.217Z,1513213646.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:26.623Z,1513213646.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:27.027Z,1513213647.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:27.408Z,1513213647.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:27.840Z,1513213647.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:28.208Z,1513213648.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:28.645Z,1513213648.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:29.012Z,1513213649.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:29.418Z,1513213649.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:29.819Z,1513213649.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:30.215Z,1513213650.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:30.614Z,1513213650.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:31.013Z,1513213651.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:31.427Z,1513213651.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:31.867Z,1513213651.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:32.214Z,1513213652.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:32.608Z,1513213652.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:33.014Z,1513213653.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:33.443Z,1513213653.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:33.790Z,1513213653.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:34.226Z,1513213654.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:34.627Z,1513213654.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:35.028Z,1513213655.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:35.414Z,1513213655.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:35.814Z,1513213655.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:36.219Z,1513213656.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:36.620Z,1513213656.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:37.048Z,1513213657.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:37.421Z,1513213657.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:37.822Z,1513213657.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:38.268Z,1513213658.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:38.610Z,1513213658.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:39.012Z,1513213659.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:39.407Z,1513213659.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:39.839Z,1513213659.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:40.220Z,1513213660.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:40.615Z,1513213660.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:41.050Z,1513213661.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:41.438Z,1513213661.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:41.827Z,1513213661.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:42.203Z,1513213662.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:42.599Z,1513213662.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:43.040Z,1513213663.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:43.411Z,1513213663.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:43.808Z,1513213663.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:44.205Z,1513213664.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:44.615Z,1513213664.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:45.011Z,1513213665.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:45.412Z,1513213665.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:45.842Z,1513213665.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:46.231Z,1513213666.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:46.636Z,1513213666.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:47.030Z,1513213667.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:47.419Z,1513213667.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:47.823Z,1513213667.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:48.219Z,1513213668.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:48.603Z,1513213668.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:49.007Z,1513213669.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:49.435Z,1513213669.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:49.821Z,1513213669.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:50.232Z,1513213670.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:50.604Z,1513213670.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:51.070Z,1513213671.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:51.419Z,1513213671.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:51.820Z,1513213671.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:52.222Z,1513213672.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:52.629Z,1513213672.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:52.988Z,1513213672.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:53.427Z,1513213673.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:53.817Z,1513213673.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:54.238Z,1513213674.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:54.608Z,1513213674.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:55.011Z,1513213675.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:55.409Z,1513213675.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:55.808Z,1513213675.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:56.215Z,1513213676.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:56.605Z,1513213676.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:57.012Z,1513213677.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:57.415Z,1513213677.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:57.817Z,1513213677.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:07:58.210Z,1513213678.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:02.634Z,1513213682.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:02.791Z,1513213682.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:03.246Z,1513213683.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:03.613Z,1513213683.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:04.035Z,1513213684.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:04.366Z,1513213684.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:04.766Z,1513213684.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:05.167Z,1513213685.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:05.569Z,1513213685.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:05.973Z,1513213685.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:06.379Z,1513213686.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:06.774Z,1513213686.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:07.298Z,1513213687.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:07.566Z,1513213687.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:07.973Z,1513213687.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:08.374Z,1513213688.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:08.374Z,1513213688.374 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2017-12-14T01:08:08.374Z,1513213688.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:08:08.376Z,1513213688.376 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:08.376Z,1513213688.376 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2017-12-14T01:08:08.376Z,1513213688.376 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:08:08.377Z,1513213688.377 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:08.378Z,1513213688.378 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-12-14T01:08:08.378Z,1513213688.378 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:08:08.417Z,1513213688.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:08:08.418Z,1513213688.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:08:08.418Z,1513213688.418 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:08:08.795Z,1513213688.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:08:08.795Z,1513213688.795 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2017-12-14T01:08:08.795Z,1513213688.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:08:08.795Z,1513213688.795 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2017-12-14T01:08:08.796Z,1513213688.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:08:08.796Z,1513213688.796 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-12-14T01:08:09.180Z,1513213689.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:08:09.181Z,1513213689.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:08:09.181Z,1513213689.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:08:09.182Z,1513213689.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:08:09.182Z,1513213689.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:08:09.182Z,1513213689.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:08:09.183Z,1513213689.183 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:08:09.183Z,1513213689.183 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:08:09.183Z,1513213689.183 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:08:09.593Z,1513213689.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:09.965Z,1513213689.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:10.363Z,1513213690.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:10.766Z,1513213690.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:11.168Z,1513213691.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:11.572Z,1513213691.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:11.992Z,1513213691.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:12.412Z,1513213692.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:12.791Z,1513213692.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:13.167Z,1513213693.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:13.616Z,1513213693.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:13.971Z,1513213693.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:14.369Z,1513213694.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:14.771Z,1513213694.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:15.203Z,1513213695.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:15.573Z,1513213695.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:15.969Z,1513213695.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:16.371Z,1513213696.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:16.824Z,1513213696.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:17.176Z,1513213697.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:17.581Z,1513213697.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:17.985Z,1513213697.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:18.379Z,1513213698.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:18.779Z,1513213698.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:19.157Z,1513213699.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:19.560Z,1513213699.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:19.960Z,1513213699.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:20.371Z,1513213700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:20.799Z,1513213700.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:21.193Z,1513213701.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:21.580Z,1513213701.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:21.995Z,1513213701.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:22.364Z,1513213702.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:22.767Z,1513213702.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:23.278Z,1513213703.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:23.575Z,1513213703.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:23.983Z,1513213703.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:24.454Z,1513213704.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:24.781Z,1513213704.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:25.194Z,1513213705.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:25.579Z,1513213705.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:25.991Z,1513213705.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:26.373Z,1513213706.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:26.759Z,1513213706.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:27.181Z,1513213707.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:27.592Z,1513213707.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:27.980Z,1513213707.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:28.365Z,1513213708.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:28.765Z,1513213708.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:29.166Z,1513213709.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:29.611Z,1513213709.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:29.996Z,1513213709.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:30.396Z,1513213710.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:30.775Z,1513213710.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:31.174Z,1513213711.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:31.570Z,1513213711.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:31.976Z,1513213711.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:32.368Z,1513213712.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:32.875Z,1513213712.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:33.181Z,1513213713.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:33.592Z,1513213713.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:33.991Z,1513213713.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:34.400Z,1513213714.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:34.757Z,1513213714.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:35.166Z,1513213715.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:35.576Z,1513213715.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:35.986Z,1513213715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:36.384Z,1513213716.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:36.777Z,1513213716.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:37.167Z,1513213717.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:37.568Z,1513213717.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:37.963Z,1513213717.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:38.394Z,1513213718.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:38.760Z,1513213718.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:39.251Z,1513213719.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:39.599Z,1513213719.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:39.992Z,1513213719.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:40.363Z,1513213720.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:40.770Z,1513213720.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:41.168Z,1513213721.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:41.567Z,1513213721.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:41.973Z,1513213721.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:42.412Z,1513213722.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:42.782Z,1513213722.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:43.180Z,1513213723.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:43.580Z,1513213723.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:43.980Z,1513213723.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:44.373Z,1513213724.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:44.776Z,1513213724.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:45.194Z,1513213725.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:45.611Z,1513213725.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:46.015Z,1513213726.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:46.365Z,1513213726.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:46.803Z,1513213726.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:47.169Z,1513213727.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:47.573Z,1513213727.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:48.011Z,1513213728.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:48.383Z,1513213728.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:48.846Z,1513213728.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:49.167Z,1513213729.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:49.577Z,1513213729.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:49.971Z,1513213729.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:50.374Z,1513213730.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:50.783Z,1513213730.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:51.187Z,1513213731.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:51.593Z,1513213731.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:52.034Z,1513213732.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:52.384Z,1513213732.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:52.760Z,1513213732.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:53.177Z,1513213733.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:53.564Z,1513213733.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:53.992Z,1513213733.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:54.383Z,1513213734.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:54.785Z,1513213734.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:55.203Z,1513213735.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:55.568Z,1513213735.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:55.993Z,1513213735.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:56.363Z,1513213736.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:56.765Z,1513213736.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:57.214Z,1513213737.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:57.570Z,1513213737.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:57.974Z,1513213737.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:08:58.003Z,1513213738.003 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:08:58.418Z,1513213738.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:01.874Z,1513213741.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:02.013Z,1513213742.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:02.371Z,1513213742.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:02.764Z,1513213742.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:03.163Z,1513213743.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:03.557Z,1513213743.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:03.942Z,1513213743.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:04.348Z,1513213744.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:04.494Z,1513213744.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:09:04.807Z,1513213744.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:05.162Z,1513213745.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:05.290Z,1513213745.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:09:05.571Z,1513213745.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:05.693Z,1513213745.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:09:05.957Z,1513213745.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:06.342Z,1513213746.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:06.741Z,1513213746.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:07.167Z,1513213747.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:07.559Z,1513213747.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:07.985Z,1513213747.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:08.358Z,1513213748.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:08.793Z,1513213748.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:09.140Z,1513213749.140 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:09:09.140Z,1513213749.140 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:09:09.141Z,1513213749.141 [BPC1](ERROR): Data Fault
2017-12-14T01:09:09.150Z,1513213749.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:09.164Z,1513213749.164 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:09:09.554Z,1513213749.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:09.949Z,1513213749.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:10.347Z,1513213750.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:10.361Z,1513213750.361 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:09:10.361Z,1513213750.361 [BPC1] No Fault, FailCount= 1
2017-12-14T01:09:10.787Z,1513213750.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:11.162Z,1513213751.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:11.557Z,1513213751.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:11.951Z,1513213751.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:12.355Z,1513213752.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:12.748Z,1513213752.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:13.161Z,1513213753.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:13.535Z,1513213753.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:13.965Z,1513213753.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:14.368Z,1513213754.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:14.766Z,1513213754.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:15.165Z,1513213755.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:15.547Z,1513213755.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:15.947Z,1513213755.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:16.337Z,1513213756.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:16.741Z,1513213756.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:17.152Z,1513213757.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:17.548Z,1513213757.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:17.947Z,1513213757.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:18.389Z,1513213758.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:18.739Z,1513213758.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:19.178Z,1513213759.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:19.563Z,1513213759.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:19.967Z,1513213759.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:20.359Z,1513213760.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:20.767Z,1513213760.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:21.147Z,1513213761.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:21.588Z,1513213761.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:21.957Z,1513213761.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:22.352Z,1513213762.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:22.748Z,1513213762.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:23.175Z,1513213763.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:23.563Z,1513213763.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:23.960Z,1513213763.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:24.353Z,1513213764.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:24.800Z,1513213764.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:25.148Z,1513213765.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:25.543Z,1513213765.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:25.952Z,1513213765.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:26.363Z,1513213766.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:26.763Z,1513213766.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:27.146Z,1513213767.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:27.552Z,1513213767.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:27.953Z,1513213767.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:28.346Z,1513213768.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:28.752Z,1513213768.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:29.155Z,1513213769.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:29.558Z,1513213769.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:29.959Z,1513213769.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:30.346Z,1513213770.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:30.751Z,1513213770.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:31.373Z,1513213771.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:31.548Z,1513213771.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:31.995Z,1513213771.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:32.375Z,1513213772.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:32.795Z,1513213772.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:33.144Z,1513213773.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:33.554Z,1513213773.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:33.946Z,1513213773.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:34.343Z,1513213774.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:34.747Z,1513213774.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:35.148Z,1513213775.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:35.560Z,1513213775.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:35.951Z,1513213775.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:36.339Z,1513213776.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:36.744Z,1513213776.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:37.147Z,1513213777.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:37.544Z,1513213777.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:37.959Z,1513213777.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:38.358Z,1513213778.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:38.751Z,1513213778.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:39.147Z,1513213779.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:39.551Z,1513213779.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:39.949Z,1513213779.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:40.351Z,1513213780.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:40.834Z,1513213780.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:41.157Z,1513213781.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:41.561Z,1513213781.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:41.963Z,1513213781.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:42.347Z,1513213782.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:42.751Z,1513213782.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:43.153Z,1513213783.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:43.557Z,1513213783.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:43.987Z,1513213783.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:44.362Z,1513213784.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:44.755Z,1513213784.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:45.151Z,1513213785.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:45.547Z,1513213785.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:45.948Z,1513213785.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:46.350Z,1513213786.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:46.744Z,1513213786.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:47.298Z,1513213787.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:47.602Z,1513213787.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:47.972Z,1513213787.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:48.343Z,1513213788.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:48.783Z,1513213788.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:49.158Z,1513213789.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:49.581Z,1513213789.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:49.963Z,1513213789.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:50.394Z,1513213790.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:50.758Z,1513213790.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:51.159Z,1513213791.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:51.552Z,1513213791.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:51.947Z,1513213791.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:52.346Z,1513213792.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:52.809Z,1513213792.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:53.175Z,1513213793.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:53.567Z,1513213793.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:54.001Z,1513213794.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:54.356Z,1513213794.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:54.771Z,1513213794.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:55.163Z,1513213795.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:55.557Z,1513213795.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:55.963Z,1513213795.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:56.371Z,1513213796.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:56.750Z,1513213796.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:57.170Z,1513213797.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:57.174Z,1513213797.174 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:04:56.9Z
2017-12-14T01:09:57.174Z,1513213797.174 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T01:09:57.174Z,1513213797.174 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T01:09:57.556Z,1513213797.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:58.197Z,1513213798.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:09:58.308Z,1513213798.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:58.448Z,1513213798.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:09:58.993Z,1513213798.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:10:01.957Z,1513213801.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:02.029Z,1513213802.029 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0016.lzma
2017-12-14T01:10:02.104Z,1513213802.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:02.463Z,1513213802.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:02.798Z,1513213802.798 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0016.lzma.bak
2017-12-14T01:10:02.798Z,1513213802.798 [DataOverHttps](INFO): SBD MOMSN=5437317
2017-12-14T01:10:02.939Z,1513213802.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:03.978Z,1513213803.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:04.114Z,1513213804.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:07.641Z,1513213807.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:07.801Z,1513213807.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:08.172Z,1513213808.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:08.563Z,1513213808.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:09.011Z,1513213809.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:09.369Z,1513213809.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:12.783Z,1513213812.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:12.861Z,1513213812.861 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0017.lzma
2017-12-14T01:10:12.939Z,1513213812.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:13.357Z,1513213813.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:13.631Z,1513213813.631 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0017.lzma.bak
2017-12-14T01:10:13.631Z,1513213813.631 [DataOverHttps](INFO): SBD MOMSN=5437319
2017-12-14T01:10:13.702Z,1513213813.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:14.842Z,1513213814.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:14.849Z,1513213814.849 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T01:10:14.849Z,1513213814.849 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T01:10:14.850Z,1513213814.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T01:10:14.998Z,1513213814.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:18.390Z,1513213818.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:18.507Z,1513213818.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:18.943Z,1513213818.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:19.287Z,1513213819.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:19.715Z,1513213819.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:20.064Z,1513213820.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:20.449Z,1513213820.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:20.939Z,1513213820.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:21.283Z,1513213821.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:21.691Z,1513213821.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:22.052Z,1513213822.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:22.459Z,1513213822.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:22.857Z,1513213822.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:23.263Z,1513213823.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:23.663Z,1513213823.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:24.072Z,1513213824.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:24.471Z,1513213824.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:24.874Z,1513213824.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:25.289Z,1513213825.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:25.657Z,1513213825.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:26.059Z,1513213826.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:26.467Z,1513213826.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:26.873Z,1513213826.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:27.339Z,1513213827.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:27.676Z,1513213827.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:28.092Z,1513213828.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:28.505Z,1513213828.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:28.876Z,1513213828.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:29.378Z,1513213829.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:29.675Z,1513213829.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:30.127Z,1513213830.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:30.456Z,1513213830.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:30.862Z,1513213830.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:31.279Z,1513213831.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:31.704Z,1513213831.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:32.064Z,1513213832.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:32.458Z,1513213832.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:32.860Z,1513213832.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:33.282Z,1513213833.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:33.659Z,1513213833.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:34.081Z,1513213834.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:34.478Z,1513213834.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:34.970Z,1513213834.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:35.316Z,1513213835.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:35.673Z,1513213835.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:36.051Z,1513213836.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:36.474Z,1513213836.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:36.849Z,1513213836.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:37.308Z,1513213837.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:37.684Z,1513213837.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:38.086Z,1513213838.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:38.483Z,1513213838.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:38.859Z,1513213838.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:39.270Z,1513213839.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:39.669Z,1513213839.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:40.128Z,1513213840.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:40.499Z,1513213840.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:40.887Z,1513213840.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:41.405Z,1513213841.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:41.691Z,1513213841.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:42.099Z,1513213842.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:42.463Z,1513213842.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:42.860Z,1513213842.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:43.311Z,1513213843.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:43.672Z,1513213843.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:44.076Z,1513213844.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:44.565Z,1513213844.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:44.939Z,1513213844.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:45.263Z,1513213845.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:45.662Z,1513213845.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:46.070Z,1513213846.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:46.472Z,1513213846.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:46.959Z,1513213846.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:47.262Z,1513213847.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:47.663Z,1513213847.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:48.079Z,1513213848.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:48.448Z,1513213848.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:48.848Z,1513213848.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:49.279Z,1513213849.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:49.672Z,1513213849.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:50.078Z,1513213850.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:50.502Z,1513213850.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:50.981Z,1513213850.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:51.266Z,1513213851.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:51.661Z,1513213851.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:52.072Z,1513213852.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:52.473Z,1513213852.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:52.876Z,1513213852.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:53.269Z,1513213853.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:53.665Z,1513213853.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:54.070Z,1513213854.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:54.474Z,1513213854.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:54.862Z,1513213854.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:55.347Z,1513213855.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:55.668Z,1513213855.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:56.109Z,1513213856.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:56.464Z,1513213856.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:56.861Z,1513213856.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:57.322Z,1513213857.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:57.680Z,1513213857.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:58.069Z,1513213858.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:58.481Z,1513213858.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:58.943Z,1513213858.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:59.271Z,1513213859.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:10:59.672Z,1513213859.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:00.071Z,1513213860.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:00.470Z,1513213860.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:00.938Z,1513213860.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:01.268Z,1513213861.268 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:11:01.268Z,1513213861.268 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:11:01.268Z,1513213861.268 [BPC1](ERROR): Data Fault
2017-12-14T01:11:01.276Z,1513213861.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:01.289Z,1513213861.289 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:11:01.675Z,1513213861.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:02.083Z,1513213862.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:02.456Z,1513213862.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:02.491Z,1513213862.491 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:11:02.491Z,1513213862.491 [BPC1] No Fault, FailCount= 1
2017-12-14T01:11:03.061Z,1513213863.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:03.263Z,1513213863.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:03.667Z,1513213863.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:04.073Z,1513213864.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:04.472Z,1513213864.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:04.927Z,1513213864.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:05.266Z,1513213865.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:05.664Z,1513213865.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:06.059Z,1513213866.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:06.473Z,1513213866.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:06.978Z,1513213866.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:07.269Z,1513213867.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:07.672Z,1513213867.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:08.071Z,1513213868.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:08.464Z,1513213868.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:08.864Z,1513213868.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:09.327Z,1513213869.327 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:09.328Z,1513213869.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2017-12-14T01:11:09.328Z,1513213869.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:11:09.329Z,1513213869.329 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:09.330Z,1513213869.330 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2017-12-14T01:11:09.330Z,1513213869.330 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:11:09.331Z,1513213869.331 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:09.331Z,1513213869.331 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-12-14T01:11:09.332Z,1513213869.332 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:11:09.362Z,1513213869.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:11:09.362Z,1513213869.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:11:09.362Z,1513213869.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:11:09.680Z,1513213869.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:11:09.680Z,1513213869.680 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2017-12-14T01:11:09.680Z,1513213869.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:11:09.680Z,1513213869.680 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2017-12-14T01:11:09.681Z,1513213869.681 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:11:09.681Z,1513213869.681 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-12-14T01:11:10.078Z,1513213870.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:11:10.078Z,1513213870.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:11:10.078Z,1513213870.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:11:10.079Z,1513213870.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:11:10.079Z,1513213870.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:11:10.080Z,1513213870.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:11:10.080Z,1513213870.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:11:10.080Z,1513213870.080 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:11:10.081Z,1513213870.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:11:10.487Z,1513213870.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:10.860Z,1513213870.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:11.362Z,1513213871.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:11.659Z,1513213871.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:12.059Z,1513213872.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:12.467Z,1513213872.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:12.930Z,1513213872.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:13.365Z,1513213873.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:13.674Z,1513213873.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:14.072Z,1513213874.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:14.446Z,1513213874.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:14.944Z,1513213874.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:15.276Z,1513213875.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:18.683Z,1513213878.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:18.825Z,1513213878.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:19.160Z,1513213879.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:19.591Z,1513213879.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:19.963Z,1513213879.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:20.368Z,1513213880.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:20.764Z,1513213880.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:21.171Z,1513213881.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:21.587Z,1513213881.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:21.983Z,1513213881.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:22.379Z,1513213882.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:22.788Z,1513213882.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:23.282Z,1513213883.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:23.631Z,1513213883.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:24.003Z,1513213884.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:24.393Z,1513213884.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:24.811Z,1513213884.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:25.158Z,1513213885.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:25.594Z,1513213885.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:25.967Z,1513213885.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:26.406Z,1513213886.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:26.766Z,1513213886.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:27.188Z,1513213887.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:27.583Z,1513213887.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:27.982Z,1513213887.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:28.372Z,1513213888.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:28.776Z,1513213888.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:29.216Z,1513213889.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:29.686Z,1513213889.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:30.008Z,1513213890.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:30.407Z,1513213890.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:30.808Z,1513213890.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:31.172Z,1513213891.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:31.603Z,1513213891.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:31.970Z,1513213891.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:32.394Z,1513213892.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:32.805Z,1513213892.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:33.219Z,1513213893.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:33.658Z,1513213893.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:34.005Z,1513213894.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:34.406Z,1513213894.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:34.799Z,1513213894.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:35.172Z,1513213895.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:35.576Z,1513213895.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:36.022Z,1513213896.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:36.424Z,1513213896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:36.778Z,1513213896.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:37.191Z,1513213897.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:37.590Z,1513213897.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:37.959Z,1513213897.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:38.357Z,1513213898.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:38.760Z,1513213898.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:39.167Z,1513213899.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:39.658Z,1513213899.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:39.979Z,1513213899.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:40.367Z,1513213900.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:40.766Z,1513213900.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:41.168Z,1513213901.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:41.572Z,1513213901.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:41.975Z,1513213901.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:42.375Z,1513213902.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:42.791Z,1513213902.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:43.152Z,1513213903.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:43.551Z,1513213903.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:43.955Z,1513213903.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:44.355Z,1513213904.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:44.752Z,1513213904.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:45.125Z,1513213905.125 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:11:45.125Z,1513213905.125 [NAL9602] Data Fault, FailCount= 4
2017-12-14T01:11:45.125Z,1513213905.125 [NAL9602](ERROR): Data Fault
2017-12-14T01:11:45.158Z,1513213905.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:45.195Z,1513213905.195 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:11:45.518Z,1513213905.518 [NAL9602](INFO): Powering down
2017-12-14T01:11:45.612Z,1513213905.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:45.952Z,1513213905.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:46.399Z,1513213906.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:46.412Z,1513213906.412 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:11:46.412Z,1513213906.412 [NAL9602] No Fault, FailCount= 4
2017-12-14T01:11:46.759Z,1513213906.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:47.191Z,1513213907.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:47.567Z,1513213907.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:47.956Z,1513213907.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:48.368Z,1513213908.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:48.763Z,1513213908.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:49.204Z,1513213909.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:49.559Z,1513213909.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:49.957Z,1513213909.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:50.356Z,1513213910.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:50.758Z,1513213910.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:51.163Z,1513213911.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:51.566Z,1513213911.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:51.965Z,1513213911.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:52.411Z,1513213912.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:52.764Z,1513213912.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:53.158Z,1513213913.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:53.571Z,1513213913.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:53.968Z,1513213913.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:54.346Z,1513213914.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:54.768Z,1513213914.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:55.164Z,1513213915.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:55.639Z,1513213915.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:55.951Z,1513213915.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:56.353Z,1513213916.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:56.754Z,1513213916.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:57.156Z,1513213917.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:57.559Z,1513213917.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:57.979Z,1513213917.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:58.353Z,1513213918.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:58.829Z,1513213918.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:59.162Z,1513213919.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:59.564Z,1513213919.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:11:59.955Z,1513213919.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:00.361Z,1513213920.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:00.767Z,1513213920.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:01.167Z,1513213921.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:01.569Z,1513213921.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:01.943Z,1513213921.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:02.371Z,1513213922.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:02.771Z,1513213922.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:03.147Z,1513213923.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:03.552Z,1513213923.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:03.952Z,1513213923.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:04.349Z,1513213924.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:04.749Z,1513213924.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:05.258Z,1513213925.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:05.549Z,1513213925.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:05.948Z,1513213925.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:06.348Z,1513213926.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:06.742Z,1513213926.742 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:12:06.742Z,1513213926.742 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:12:06.742Z,1513213926.742 [BPC1](ERROR): Data Fault
2017-12-14T01:12:06.751Z,1513213926.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:06.766Z,1513213926.766 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:12:07.163Z,1513213927.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:07.549Z,1513213927.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:07.939Z,1513213927.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:07.953Z,1513213927.953 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:12:07.953Z,1513213927.953 [BPC1] No Fault, FailCount= 1
2017-12-14T01:12:08.391Z,1513213928.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:08.750Z,1513213928.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:09.142Z,1513213929.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:09.546Z,1513213929.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:09.938Z,1513213929.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:10.349Z,1513213930.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:10.746Z,1513213930.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:11.150Z,1513213931.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:11.539Z,1513213931.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:11.951Z,1513213931.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:12.349Z,1513213932.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:12.746Z,1513213932.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:13.149Z,1513213933.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:13.550Z,1513213933.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:13.939Z,1513213933.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:14.346Z,1513213934.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:14.742Z,1513213934.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:15.146Z,1513213935.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:15.547Z,1513213935.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:18.762Z,1513213938.762 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:12:18.831Z,1513213938.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:18.966Z,1513213938.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:19.307Z,1513213939.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:19.699Z,1513213939.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:20.092Z,1513213940.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:20.494Z,1513213940.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:20.896Z,1513213940.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:21.307Z,1513213941.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:21.703Z,1513213941.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:22.097Z,1513213942.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:22.493Z,1513213942.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:22.933Z,1513213942.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:23.326Z,1513213943.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:23.697Z,1513213943.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:24.094Z,1513213944.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:24.494Z,1513213944.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:24.932Z,1513213944.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:25.435Z,1513213945.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:25.719Z,1513213945.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:26.096Z,1513213946.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:26.504Z,1513213946.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:26.964Z,1513213946.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:27.299Z,1513213947.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:27.698Z,1513213947.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:28.116Z,1513213948.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:28.503Z,1513213948.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:28.975Z,1513213948.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:29.358Z,1513213949.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:29.662Z,1513213949.662 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:12:29.731Z,1513213949.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:30.099Z,1513213950.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:30.520Z,1513213950.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:31.034Z,1513213951.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:31.315Z,1513213951.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:31.714Z,1513213951.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:32.139Z,1513213952.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:32.499Z,1513213952.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:32.924Z,1513213952.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:33.343Z,1513213953.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:33.727Z,1513213953.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:34.134Z,1513213954.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:34.503Z,1513213954.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:34.907Z,1513213954.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:35.337Z,1513213955.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:35.736Z,1513213955.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:36.124Z,1513213956.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:36.527Z,1513213956.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:36.977Z,1513213956.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:37.315Z,1513213957.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:37.715Z,1513213957.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:38.087Z,1513213958.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:38.519Z,1513213958.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:39.032Z,1513213959.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:39.328Z,1513213959.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:39.731Z,1513213959.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:40.127Z,1513213960.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:40.495Z,1513213960.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:40.997Z,1513213960.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:41.305Z,1513213961.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:41.703Z,1513213961.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:42.112Z,1513213962.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:42.522Z,1513213962.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:42.988Z,1513213962.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:43.311Z,1513213963.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:43.710Z,1513213963.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:44.092Z,1513213964.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:44.499Z,1513213964.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:44.902Z,1513213964.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:45.323Z,1513213965.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:45.719Z,1513213965.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:46.116Z,1513213966.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:46.507Z,1513213966.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:46.914Z,1513213966.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:47.433Z,1513213967.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:47.716Z,1513213967.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:48.121Z,1513213968.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:48.559Z,1513213968.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:48.922Z,1513213968.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:49.323Z,1513213969.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:49.713Z,1513213969.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:50.112Z,1513213970.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:50.512Z,1513213970.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:50.957Z,1513213970.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:51.327Z,1513213971.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:51.787Z,1513213971.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:52.114Z,1513213972.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:52.511Z,1513213972.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:52.999Z,1513213972.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:53.308Z,1513213973.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:53.755Z,1513213973.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:54.123Z,1513213974.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:54.555Z,1513213974.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:55.011Z,1513213975.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:55.300Z,1513213975.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:55.702Z,1513213975.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:56.101Z,1513213976.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:56.507Z,1513213976.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:56.981Z,1513213976.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:57.316Z,1513213977.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:57.719Z,1513213977.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:58.134Z,1513213978.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:58.506Z,1513213978.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:58.901Z,1513213978.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:59.306Z,1513213979.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:12:59.703Z,1513213979.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:00.116Z,1513213980.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:00.519Z,1513213980.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:00.917Z,1513213980.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:01.365Z,1513213981.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:01.709Z,1513213981.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:02.099Z,1513213982.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:02.516Z,1513213982.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:02.928Z,1513213982.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:03.377Z,1513213983.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:03.731Z,1513213983.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:04.119Z,1513213984.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:04.540Z,1513213984.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:05.010Z,1513213985.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:05.314Z,1513213985.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:05.712Z,1513213985.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:06.118Z,1513213986.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:06.526Z,1513213986.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:06.970Z,1513213986.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:07.297Z,1513213987.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:07.735Z,1513213987.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:08.103Z,1513213988.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:08.507Z,1513213988.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:09.002Z,1513213989.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:09.347Z,1513213989.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:09.716Z,1513213989.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:10.126Z,1513213990.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:10.504Z,1513213990.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:10.985Z,1513213990.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:11.331Z,1513213991.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:11.700Z,1513213991.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:12.126Z,1513213992.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:12.534Z,1513213992.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:12.990Z,1513213992.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:13.306Z,1513213993.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:13.755Z,1513213993.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:14.101Z,1513213994.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:14.508Z,1513213994.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:14.959Z,1513213994.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:15.352Z,1513213995.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:15.713Z,1513213995.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:19.237Z,1513213999.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:19.384Z,1513213999.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:19.746Z,1513213999.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:20.111Z,1513214000.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:20.506Z,1513214000.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:20.983Z,1513214000.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:21.322Z,1513214001.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:21.720Z,1513214001.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:22.121Z,1513214002.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:22.512Z,1513214002.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:22.968Z,1513214002.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:23.320Z,1513214003.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:23.753Z,1513214003.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:24.108Z,1513214004.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:24.538Z,1513214004.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:25.001Z,1513214005.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:25.328Z,1513214005.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:25.711Z,1513214005.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:26.104Z,1513214006.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:26.511Z,1513214006.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:27.033Z,1513214007.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:27.355Z,1513214007.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:27.725Z,1513214007.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:28.162Z,1513214008.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:28.520Z,1513214008.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:28.918Z,1513214008.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:29.334Z,1513214009.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:29.714Z,1513214009.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:30.108Z,1513214010.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:30.527Z,1513214010.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:30.925Z,1513214010.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:31.363Z,1513214011.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:31.714Z,1513214011.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:32.114Z,1513214012.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:32.514Z,1513214012.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:32.975Z,1513214012.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:33.384Z,1513214013.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:33.743Z,1513214013.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:34.144Z,1513214014.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:34.517Z,1513214014.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:35.042Z,1513214015.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:35.349Z,1513214015.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:35.744Z,1513214015.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:36.140Z,1513214016.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:36.544Z,1513214016.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:36.996Z,1513214016.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:37.344Z,1513214017.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:37.707Z,1513214017.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:38.114Z,1513214018.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:38.514Z,1513214018.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:39.023Z,1513214019.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:39.352Z,1513214019.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:39.743Z,1513214019.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:40.171Z,1513214020.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:40.510Z,1513214020.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:40.912Z,1513214020.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:41.335Z,1513214021.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:41.744Z,1513214021.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:42.159Z,1513214022.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:42.529Z,1513214022.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:42.966Z,1513214022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:43.323Z,1513214023.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:43.721Z,1513214023.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:44.120Z,1513214024.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:44.500Z,1513214024.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:44.900Z,1513214024.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:45.337Z,1513214025.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:45.723Z,1513214025.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:46.183Z,1513214026.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:46.530Z,1513214026.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:46.974Z,1513214026.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:47.307Z,1513214027.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:47.708Z,1513214027.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:48.109Z,1513214028.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:48.512Z,1513214028.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:48.978Z,1513214028.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:49.399Z,1513214029.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:49.717Z,1513214029.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:50.107Z,1513214030.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:50.556Z,1513214030.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:50.975Z,1513214030.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:51.330Z,1513214031.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:51.726Z,1513214031.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:52.123Z,1513214032.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:52.587Z,1513214032.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:52.989Z,1513214032.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:53.334Z,1513214033.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:53.704Z,1513214033.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:54.112Z,1513214034.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:54.536Z,1513214034.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:55.020Z,1513214035.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:55.311Z,1513214035.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:55.724Z,1513214035.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:56.116Z,1513214036.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:56.514Z,1513214036.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:56.915Z,1513214036.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:57.332Z,1513214037.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:57.720Z,1513214037.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:58.125Z,1513214038.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:58.511Z,1513214038.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:58.931Z,1513214038.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:59.343Z,1513214039.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:59.678Z,1513214039.678 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T01:13:59.678Z,1513214039.678 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T01:13:59.678Z,1513214039.678 [DropWeight](ERROR): Hardware Fault
2017-12-14T01:13:59.735Z,1513214039.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:13:59.778Z,1513214039.778 [CBIT](INFO): Critical error at 20171214T011359
2017-12-14T01:13:59.780Z,1513214039.780 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T01:13:59.780Z,1513214039.780 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T01:14:00.108Z,1513214040.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:00.132Z,1513214040.132 [CBIT](INFO): Critical error at 20171214T011359
2017-12-14T01:14:00.511Z,1513214040.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:01.057Z,1513214041.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:01.332Z,1513214041.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:01.707Z,1513214041.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:02.136Z,1513214042.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:02.546Z,1513214042.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:02.987Z,1513214042.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:03.373Z,1513214043.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:03.732Z,1513214043.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:04.139Z,1513214044.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:04.531Z,1513214044.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:04.983Z,1513214044.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:05.395Z,1513214045.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:05.715Z,1513214045.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:06.116Z,1513214046.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:06.563Z,1513214046.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:07.002Z,1513214047.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:07.319Z,1513214047.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:07.715Z,1513214047.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:08.112Z,1513214048.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:08.591Z,1513214048.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:08.994Z,1513214048.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:09.327Z,1513214049.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:09.731Z,1513214049.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:10.123Z,1513214050.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:10.123Z,1513214050.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2017-12-14T01:14:10.124Z,1513214050.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:14:10.125Z,1513214050.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:10.125Z,1513214050.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2017-12-14T01:14:10.126Z,1513214050.126 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:14:10.127Z,1513214050.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:10.127Z,1513214050.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-12-14T01:14:10.127Z,1513214050.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:14:10.139Z,1513214050.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:14:10.139Z,1513214050.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:14:10.139Z,1513214050.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:14:10.512Z,1513214050.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:14:10.512Z,1513214050.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2017-12-14T01:14:10.521Z,1513214050.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:14:10.521Z,1513214050.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2017-12-14T01:14:10.522Z,1513214050.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:14:10.522Z,1513214050.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-12-14T01:14:10.903Z,1513214050.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:14:10.904Z,1513214050.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:14:10.904Z,1513214050.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:14:10.905Z,1513214050.905 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:14:10.905Z,1513214050.905 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:14:10.906Z,1513214050.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:14:10.906Z,1513214050.906 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:14:10.906Z,1513214050.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:14:10.907Z,1513214050.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:14:11.359Z,1513214051.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:11.738Z,1513214051.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:12.109Z,1513214052.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:12.579Z,1513214052.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:12.932Z,1513214052.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:13.354Z,1513214053.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:13.708Z,1513214053.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:14.106Z,1513214054.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:14.517Z,1513214054.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:15.010Z,1513214055.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:15.352Z,1513214055.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:15.726Z,1513214055.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:16.122Z,1513214056.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:19.607Z,1513214059.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:19.759Z,1513214059.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:20.091Z,1513214060.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:20.490Z,1513214060.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:20.971Z,1513214060.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:21.282Z,1513214061.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:21.687Z,1513214061.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:22.083Z,1513214062.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:22.492Z,1513214062.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:22.885Z,1513214062.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:23.309Z,1513214063.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:23.719Z,1513214063.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:24.106Z,1513214064.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:24.548Z,1513214064.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:24.885Z,1513214064.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:25.371Z,1513214065.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:25.675Z,1513214065.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:26.115Z,1513214066.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:26.488Z,1513214066.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:26.905Z,1513214066.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:27.369Z,1513214067.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:27.738Z,1513214067.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:28.083Z,1513214068.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:28.480Z,1513214068.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:28.978Z,1513214068.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:29.280Z,1513214069.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:29.700Z,1513214069.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:30.098Z,1513214070.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:30.474Z,1513214070.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:30.962Z,1513214070.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:31.315Z,1513214071.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:31.682Z,1513214071.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:32.084Z,1513214072.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:32.488Z,1513214072.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:32.994Z,1513214072.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:33.288Z,1513214073.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:33.683Z,1513214073.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:34.077Z,1513214074.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:34.523Z,1513214074.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:34.969Z,1513214074.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:35.299Z,1513214075.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:35.706Z,1513214075.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:36.098Z,1513214076.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:36.479Z,1513214076.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:36.882Z,1513214076.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:37.306Z,1513214077.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:37.677Z,1513214077.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:38.087Z,1513214078.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:38.507Z,1513214078.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:38.903Z,1513214078.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:39.348Z,1513214079.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:39.703Z,1513214079.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:40.111Z,1513214080.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:40.541Z,1513214080.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:40.899Z,1513214080.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:41.368Z,1513214081.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:41.703Z,1513214081.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:42.131Z,1513214082.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:42.477Z,1513214082.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:42.963Z,1513214082.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:43.295Z,1513214083.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:43.722Z,1513214083.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:44.089Z,1513214084.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:44.496Z,1513214084.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:44.982Z,1513214084.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:45.303Z,1513214085.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:45.683Z,1513214085.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:46.081Z,1513214086.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:46.480Z,1513214086.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:46.991Z,1513214086.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:47.314Z,1513214087.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:47.699Z,1513214087.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:48.099Z,1513214088.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:48.488Z,1513214088.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:48.953Z,1513214088.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:49.284Z,1513214089.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:49.681Z,1513214089.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:50.106Z,1513214090.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:50.512Z,1513214090.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:50.884Z,1513214090.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:51.296Z,1513214091.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:51.686Z,1513214091.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:52.087Z,1513214092.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:52.482Z,1513214092.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:52.885Z,1513214092.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:53.344Z,1513214093.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:53.703Z,1513214093.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:54.099Z,1513214094.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:54.480Z,1513214094.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:54.875Z,1513214094.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:55.343Z,1513214095.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:55.683Z,1513214095.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:56.110Z,1513214096.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:56.476Z,1513214096.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:56.960Z,1513214096.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:57.281Z,1513214097.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:57.677Z,1513214097.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:58.087Z,1513214098.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:58.482Z,1513214098.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:58.974Z,1513214098.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:59.287Z,1513214099.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:14:59.723Z,1513214099.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:00.092Z,1513214100.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:00.487Z,1513214100.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:00.987Z,1513214100.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:01.290Z,1513214101.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:01.690Z,1513214101.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:02.135Z,1513214102.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:02.488Z,1513214102.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:03.008Z,1513214103.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:03.293Z,1513214103.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:03.711Z,1513214103.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:04.099Z,1513214104.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:04.476Z,1513214104.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:04.877Z,1513214104.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:05.304Z,1513214105.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:05.693Z,1513214105.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:06.099Z,1513214106.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:06.491Z,1513214106.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:06.891Z,1513214106.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:07.348Z,1513214107.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:07.699Z,1513214107.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:08.104Z,1513214108.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:08.476Z,1513214108.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:08.903Z,1513214108.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:09.390Z,1513214109.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:09.683Z,1513214109.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:10.081Z,1513214110.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:10.484Z,1513214110.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:10.960Z,1513214110.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:11.303Z,1513214111.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:11.699Z,1513214111.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:12.112Z,1513214112.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:12.490Z,1513214112.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:12.931Z,1513214112.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:13.284Z,1513214113.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:13.678Z,1513214113.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:14.105Z,1513214114.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:14.514Z,1513214114.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:14.970Z,1513214114.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:15.282Z,1513214115.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:15.286Z,1513214115.286 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:15:15.286Z,1513214115.286 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:15:15.286Z,1513214115.286 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:15:15.286Z,1513214115.286 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:15:15.743Z,1513214115.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:15.747Z,1513214115.747 [Default:CheckIn:D] Stopped
2017-12-14T01:15:15.747Z,1513214115.747 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:15:16.080Z,1513214116.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.005941 min 
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn:E] Stopped
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn] Stopped
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn](INFO): Running loop #5
2017-12-14T01:15:16.084Z,1513214116.084 [Default:CheckIn] Running Loop=5
2017-12-14T01:15:16.085Z,1513214116.085 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:15:16.085Z,1513214116.085 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:15:16.499Z,1513214116.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:19.979Z,1513214119.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:20.161Z,1513214120.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:20.536Z,1513214120.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:20.956Z,1513214120.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:21.426Z,1513214121.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:21.738Z,1513214121.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:22.105Z,1513214122.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:22.588Z,1513214122.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:22.927Z,1513214122.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:23.367Z,1513214123.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:23.744Z,1513214123.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:24.195Z,1513214124.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:24.495Z,1513214124.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:25.010Z,1513214125.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:25.363Z,1513214125.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:25.718Z,1513214125.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:26.174Z,1513214126.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:26.558Z,1513214126.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:27.003Z,1513214127.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:27.303Z,1513214127.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:27.717Z,1513214127.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:28.110Z,1513214128.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:28.512Z,1513214128.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:28.984Z,1513214128.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:29.316Z,1513214129.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:29.735Z,1513214129.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:30.121Z,1513214130.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:30.504Z,1513214130.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:30.992Z,1513214130.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:31.319Z,1513214131.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:31.764Z,1513214131.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:32.123Z,1513214132.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:32.534Z,1513214132.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:32.974Z,1513214132.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:33.304Z,1513214133.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:33.710Z,1513214133.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:34.106Z,1513214134.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:34.549Z,1513214134.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:34.963Z,1513214134.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:35.335Z,1513214135.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:35.721Z,1513214135.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:36.116Z,1513214136.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:36.513Z,1513214136.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:36.912Z,1513214136.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:37.383Z,1513214137.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:37.721Z,1513214137.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:38.132Z,1513214138.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:38.527Z,1513214138.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:38.995Z,1513214138.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:39.351Z,1513214139.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:39.715Z,1513214139.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:40.110Z,1513214140.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:40.512Z,1513214140.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:40.992Z,1513214140.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:41.351Z,1513214141.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:41.712Z,1513214141.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:42.119Z,1513214142.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:42.507Z,1513214142.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:42.989Z,1513214142.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:43.306Z,1513214143.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:43.702Z,1513214143.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:44.134Z,1513214144.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:44.585Z,1513214144.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:45.019Z,1513214145.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:45.325Z,1513214145.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:45.711Z,1513214145.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:46.107Z,1513214146.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:46.511Z,1513214146.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:46.985Z,1513214146.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:47.320Z,1513214147.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:47.791Z,1513214147.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:48.132Z,1513214148.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:48.536Z,1513214148.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:48.911Z,1513214148.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:49.314Z,1513214149.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:49.704Z,1513214149.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:50.108Z,1513214150.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:50.512Z,1513214150.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:50.992Z,1513214150.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:51.344Z,1513214151.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:51.711Z,1513214151.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:52.106Z,1513214152.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:52.508Z,1513214152.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:53.062Z,1513214153.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:53.335Z,1513214153.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:53.742Z,1513214153.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:54.152Z,1513214154.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:54.506Z,1513214154.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:54.980Z,1513214154.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:55.301Z,1513214155.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:55.706Z,1513214155.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:56.123Z,1513214156.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:56.626Z,1513214156.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:56.992Z,1513214156.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:57.327Z,1513214157.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:57.718Z,1513214157.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:58.167Z,1513214158.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:58.517Z,1513214158.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:58.993Z,1513214158.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:59.327Z,1513214159.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:15:59.727Z,1513214159.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:00.121Z,1513214160.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:00.556Z,1513214160.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:00.987Z,1513214160.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:01.312Z,1513214161.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:01.712Z,1513214161.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:02.127Z,1513214162.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:02.180Z,1513214162.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:16:02.522Z,1513214162.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:02.924Z,1513214162.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:02.977Z,1513214162.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:16:03.338Z,1513214163.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:03.783Z,1513214163.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:04.119Z,1513214164.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:04.515Z,1513214164.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:04.908Z,1513214164.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:05.338Z,1513214165.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:05.722Z,1513214165.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:06.126Z,1513214166.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:06.517Z,1513214166.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:07.027Z,1513214167.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:07.326Z,1513214167.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:07.748Z,1513214167.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:08.125Z,1513214168.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:08.548Z,1513214168.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:08.998Z,1513214168.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:09.371Z,1513214169.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:09.703Z,1513214169.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:10.138Z,1513214170.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:10.509Z,1513214170.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:10.994Z,1513214170.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:11.354Z,1513214171.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:11.734Z,1513214171.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:12.135Z,1513214172.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:12.500Z,1513214172.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:12.980Z,1513214172.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:13.339Z,1513214173.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:13.707Z,1513214173.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:14.115Z,1513214174.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:14.517Z,1513214174.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:14.999Z,1513214174.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:15.307Z,1513214175.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:15.715Z,1513214175.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:16.113Z,1513214176.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:16.551Z,1513214176.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:22.481Z,1513214182.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:22.714Z,1513214182.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:23.170Z,1513214183.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:23.531Z,1513214183.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:23.894Z,1513214183.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:24.329Z,1513214184.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:24.739Z,1513214184.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:25.195Z,1513214185.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:25.527Z,1513214185.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:25.919Z,1513214185.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:26.316Z,1513214186.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:26.821Z,1513214186.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:27.250Z,1513214187.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:27.523Z,1513214187.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:27.906Z,1513214187.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:28.332Z,1513214188.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:28.695Z,1513214188.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:29.110Z,1513214189.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:29.516Z,1513214189.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:29.914Z,1513214189.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:30.324Z,1513214190.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:30.831Z,1513214190.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:31.117Z,1513214191.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:31.576Z,1513214191.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:31.910Z,1513214191.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:32.280Z,1513214192.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:32.665Z,1513214192.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:33.103Z,1513214193.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:33.475Z,1513214193.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:33.885Z,1513214193.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:34.247Z,1513214194.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:34.661Z,1513214194.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:35.120Z,1513214195.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:35.451Z,1513214195.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:35.899Z,1513214195.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:36.308Z,1513214196.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:36.686Z,1513214196.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:37.059Z,1513214197.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:37.467Z,1513214197.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:37.857Z,1513214197.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:38.247Z,1513214198.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:38.671Z,1513214198.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:39.074Z,1513214199.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:39.475Z,1513214199.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:39.895Z,1513214199.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:40.291Z,1513214200.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:40.665Z,1513214200.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:41.141Z,1513214201.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:41.477Z,1513214201.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:41.889Z,1513214201.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:42.267Z,1513214202.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:42.689Z,1513214202.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:43.078Z,1513214203.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:43.456Z,1513214203.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:43.855Z,1513214203.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:44.274Z,1513214204.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:44.647Z,1513214204.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:45.090Z,1513214205.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:45.456Z,1513214205.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:45.855Z,1513214205.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:46.246Z,1513214206.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:46.648Z,1513214206.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:47.048Z,1513214207.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:47.464Z,1513214207.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:47.859Z,1513214207.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:48.234Z,1513214208.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:48.630Z,1513214208.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:49.053Z,1513214209.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:49.507Z,1513214209.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:49.853Z,1513214209.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:50.235Z,1513214210.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:50.671Z,1513214210.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:51.051Z,1513214211.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:51.472Z,1513214211.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:51.858Z,1513214211.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:52.291Z,1513214212.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:52.651Z,1513214212.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:53.050Z,1513214213.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:53.457Z,1513214213.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:53.899Z,1513214213.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:54.243Z,1513214214.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:54.639Z,1513214214.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:55.040Z,1513214215.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:55.439Z,1513214215.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:55.867Z,1513214215.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:56.247Z,1513214216.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:56.648Z,1513214216.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:57.104Z,1513214217.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:57.440Z,1513214217.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:57.914Z,1513214217.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:58.240Z,1513214218.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:58.672Z,1513214218.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:59.083Z,1513214219.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:59.456Z,1513214219.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:16:59.848Z,1513214219.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:00.292Z,1513214220.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:00.643Z,1513214220.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:01.051Z,1513214221.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:01.453Z,1513214221.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:01.849Z,1513214221.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:02.244Z,1513214222.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:02.638Z,1513214222.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:03.048Z,1513214223.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:03.507Z,1513214223.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:03.860Z,1513214223.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:04.245Z,1513214224.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:04.646Z,1513214224.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:05.056Z,1513214225.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:05.452Z,1513214225.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:05.855Z,1513214225.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:06.243Z,1513214226.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:06.732Z,1513214226.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:07.048Z,1513214227.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:07.459Z,1513214227.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:07.854Z,1513214227.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:08.244Z,1513214228.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:08.647Z,1513214228.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:09.051Z,1513214229.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:09.452Z,1513214229.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:09.864Z,1513214229.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:10.240Z,1513214230.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:10.639Z,1513214230.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:11.061Z,1513214231.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:11.061Z,1513214231.061 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2017-12-14T01:17:11.061Z,1513214231.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:17:11.063Z,1513214231.063 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:11.063Z,1513214231.063 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2017-12-14T01:17:11.063Z,1513214231.063 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:17:11.065Z,1513214231.065 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:11.065Z,1513214231.065 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-12-14T01:17:11.065Z,1513214231.065 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:17:11.076Z,1513214231.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:17:11.076Z,1513214231.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:17:11.077Z,1513214231.077 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:17:11.467Z,1513214231.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:17:11.467Z,1513214231.467 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2017-12-14T01:17:11.467Z,1513214231.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:17:11.467Z,1513214231.467 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2017-12-14T01:17:11.468Z,1513214231.468 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:17:11.468Z,1513214231.468 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-12-14T01:17:11.893Z,1513214231.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:17:11.894Z,1513214231.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:17:11.894Z,1513214231.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:17:11.894Z,1513214231.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:17:11.895Z,1513214231.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:17:11.895Z,1513214231.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:17:11.895Z,1513214231.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:17:11.896Z,1513214231.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:17:11.896Z,1513214231.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:17:12.243Z,1513214232.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:12.644Z,1513214232.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:13.078Z,1513214233.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:13.459Z,1513214233.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:13.853Z,1513214233.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:14.245Z,1513214234.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:14.643Z,1513214234.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:15.057Z,1513214235.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:15.485Z,1513214235.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:15.853Z,1513214235.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:16.245Z,1513214236.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:16.649Z,1513214236.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:20.116Z,1513214240.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:20.256Z,1513214240.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:20.687Z,1513214240.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:21.048Z,1513214241.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:21.463Z,1513214241.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:21.827Z,1513214241.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:22.251Z,1513214242.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:22.671Z,1513214242.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:23.053Z,1513214243.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:23.428Z,1513214243.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:23.828Z,1513214243.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:24.225Z,1513214244.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:24.623Z,1513214244.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:25.042Z,1513214245.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:25.435Z,1513214245.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:25.879Z,1513214245.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:26.228Z,1513214246.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:26.627Z,1513214246.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:27.065Z,1513214247.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:27.436Z,1513214247.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:27.835Z,1513214247.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:28.232Z,1513214248.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:28.632Z,1513214248.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:29.036Z,1513214249.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:29.435Z,1513214249.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:29.867Z,1513214249.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:30.234Z,1513214250.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:30.630Z,1513214250.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:31.036Z,1513214251.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:31.437Z,1513214251.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:31.843Z,1513214251.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:32.227Z,1513214252.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:32.663Z,1513214252.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:33.035Z,1513214253.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:33.441Z,1513214253.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:33.843Z,1513214253.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:34.231Z,1513214254.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:34.635Z,1513214254.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:35.043Z,1513214255.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:35.437Z,1513214255.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:35.836Z,1513214255.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:36.226Z,1513214256.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:36.639Z,1513214256.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:37.037Z,1513214257.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:37.443Z,1513214257.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:37.839Z,1513214257.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:38.232Z,1513214258.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:38.674Z,1513214258.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:39.032Z,1513214259.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:39.441Z,1513214259.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:39.844Z,1513214259.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:40.229Z,1513214260.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:40.627Z,1513214260.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:41.036Z,1513214261.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:41.494Z,1513214261.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:41.876Z,1513214261.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:42.259Z,1513214262.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:42.640Z,1513214262.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:43.048Z,1513214263.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:43.479Z,1513214263.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:43.843Z,1513214263.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:44.259Z,1513214264.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:44.638Z,1513214264.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:45.087Z,1513214265.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:45.440Z,1513214265.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:45.843Z,1513214265.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:46.236Z,1513214266.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:46.616Z,1513214266.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:47.043Z,1513214267.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:47.453Z,1513214267.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:47.843Z,1513214267.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:48.271Z,1513214268.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:48.636Z,1513214268.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:49.049Z,1513214269.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:49.456Z,1513214269.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:49.831Z,1513214269.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:50.225Z,1513214270.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:50.635Z,1513214270.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:51.040Z,1513214271.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:51.467Z,1513214271.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:51.862Z,1513214271.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:52.227Z,1513214272.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:52.663Z,1513214272.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:53.044Z,1513214273.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:53.434Z,1513214273.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:53.832Z,1513214273.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:54.231Z,1513214274.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:54.719Z,1513214274.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:55.033Z,1513214275.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:55.443Z,1513214275.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:55.836Z,1513214275.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:56.231Z,1513214276.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:56.631Z,1513214276.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:57.040Z,1513214277.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:57.451Z,1513214277.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:57.882Z,1513214277.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:58.236Z,1513214278.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:58.660Z,1513214278.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:59.074Z,1513214279.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:59.447Z,1513214279.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:17:59.840Z,1513214279.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:00.231Z,1513214280.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:00.636Z,1513214280.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:01.068Z,1513214281.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:01.443Z,1513214281.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:01.847Z,1513214281.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:02.234Z,1513214282.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:02.635Z,1513214282.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:03.038Z,1513214283.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:03.441Z,1513214283.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:03.840Z,1513214283.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:04.248Z,1513214284.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:04.683Z,1513214284.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:05.055Z,1513214285.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:05.459Z,1513214285.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:05.878Z,1513214285.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:06.231Z,1513214286.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:06.655Z,1513214286.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:07.063Z,1513214287.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:07.482Z,1513214287.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:07.840Z,1513214287.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:08.245Z,1513214288.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:08.624Z,1513214288.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:09.049Z,1513214289.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:09.451Z,1513214289.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:09.844Z,1513214289.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:10.298Z,1513214290.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:10.670Z,1513214290.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:11.050Z,1513214291.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:11.450Z,1513214291.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:11.847Z,1513214291.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:12.227Z,1513214292.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:12.621Z,1513214292.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:13.052Z,1513214293.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:13.455Z,1513214293.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:13.872Z,1513214293.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:14.228Z,1513214294.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:14.626Z,1513214294.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:15.065Z,1513214295.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:15.463Z,1513214295.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:15.929Z,1513214295.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:16.227Z,1513214296.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:16.627Z,1513214296.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:17.106Z,1513214297.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:20.465Z,1513214300.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:20.591Z,1513214300.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:21.009Z,1513214301.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:21.375Z,1513214301.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:21.737Z,1513214301.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:22.165Z,1513214302.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:22.551Z,1513214302.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:22.946Z,1513214302.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:23.348Z,1513214303.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:23.740Z,1513214303.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:24.151Z,1513214304.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:24.539Z,1513214304.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:24.946Z,1513214304.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:25.345Z,1513214305.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:25.838Z,1513214305.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:26.160Z,1513214306.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:26.587Z,1513214306.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:27.042Z,1513214307.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:27.395Z,1513214307.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:27.740Z,1513214307.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:28.186Z,1513214308.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:28.554Z,1513214308.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:29.038Z,1513214309.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:29.351Z,1513214309.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:29.815Z,1513214309.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:30.139Z,1513214310.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:30.551Z,1513214310.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:30.992Z,1513214310.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:31.352Z,1513214311.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:31.757Z,1513214311.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:32.158Z,1513214312.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:32.551Z,1513214312.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:33.020Z,1513214313.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:33.364Z,1513214313.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:33.731Z,1513214313.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:34.160Z,1513214314.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:34.563Z,1513214314.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:35.011Z,1513214315.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:35.355Z,1513214315.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:35.731Z,1513214315.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:36.135Z,1513214316.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:36.536Z,1513214316.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:36.934Z,1513214316.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:37.431Z,1513214317.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:37.773Z,1513214317.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:38.148Z,1513214318.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:38.535Z,1513214318.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:38.944Z,1513214318.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:39.388Z,1513214319.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:39.739Z,1513214319.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:40.151Z,1513214320.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:40.543Z,1513214320.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:40.995Z,1513214320.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:41.372Z,1513214321.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:41.737Z,1513214321.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:42.129Z,1513214322.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:42.691Z,1513214322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:43.045Z,1513214323.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:43.372Z,1513214323.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:43.885Z,1513214323.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:44.181Z,1513214324.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:44.543Z,1513214324.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:44.986Z,1513214324.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:45.359Z,1513214325.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:45.744Z,1513214325.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:46.185Z,1513214326.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:46.579Z,1513214326.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:46.995Z,1513214326.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:47.346Z,1513214327.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:47.740Z,1513214327.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:48.182Z,1513214328.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:48.559Z,1513214328.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:49.003Z,1513214329.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:49.442Z,1513214329.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:49.783Z,1513214329.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:50.187Z,1513214330.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:50.529Z,1513214330.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:50.977Z,1513214330.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:51.338Z,1513214331.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:51.735Z,1513214331.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:52.171Z,1513214332.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:52.541Z,1513214332.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:52.950Z,1513214332.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:53.345Z,1513214333.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:53.734Z,1513214333.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:54.136Z,1513214334.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:54.549Z,1513214334.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:54.994Z,1513214334.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:55.351Z,1513214335.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:55.766Z,1513214335.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:56.149Z,1513214336.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:56.545Z,1513214336.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:57.001Z,1513214337.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:57.363Z,1513214337.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:57.731Z,1513214337.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:58.140Z,1513214338.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:58.167Z,1513214338.167 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:18:58.540Z,1513214338.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:59.028Z,1513214339.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:59.367Z,1513214339.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:18:59.739Z,1513214339.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:00.138Z,1513214340.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:00.536Z,1513214340.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:01.000Z,1513214341.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:01.367Z,1513214341.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:01.791Z,1513214341.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:02.146Z,1513214342.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:02.549Z,1513214342.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:03.006Z,1513214343.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:03.351Z,1513214343.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:03.754Z,1513214343.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:04.160Z,1513214344.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:04.582Z,1513214344.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:04.955Z,1513214344.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:05.348Z,1513214345.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:05.731Z,1513214345.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:06.129Z,1513214346.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:06.535Z,1513214346.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:06.933Z,1513214346.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:07.356Z,1513214347.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:07.752Z,1513214347.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:08.148Z,1513214348.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:08.563Z,1513214348.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:08.995Z,1513214348.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:09.358Z,1513214349.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:09.738Z,1513214349.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:10.155Z,1513214350.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:10.560Z,1513214350.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:10.996Z,1513214350.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:11.428Z,1513214351.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:11.739Z,1513214351.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:12.159Z,1513214352.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:12.539Z,1513214352.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:13.035Z,1513214353.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:13.378Z,1513214353.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:13.760Z,1513214353.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:14.183Z,1513214354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:14.539Z,1513214354.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:14.993Z,1513214354.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:15.359Z,1513214355.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:15.740Z,1513214355.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:16.143Z,1513214356.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:16.562Z,1513214356.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:17.095Z,1513214357.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:17.357Z,1513214357.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:20.723Z,1513214360.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:20.860Z,1513214360.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:21.307Z,1513214361.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:21.615Z,1513214361.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:22.008Z,1513214362.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:22.399Z,1513214362.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:22.796Z,1513214362.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:23.207Z,1513214363.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:23.606Z,1513214363.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:23.999Z,1513214363.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:24.406Z,1513214364.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:24.808Z,1513214364.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:25.207Z,1513214365.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:25.606Z,1513214365.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:25.994Z,1513214365.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:26.422Z,1513214366.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:26.787Z,1513214366.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:27.283Z,1513214367.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:27.623Z,1513214367.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:28.023Z,1513214368.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:28.391Z,1513214368.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:28.947Z,1513214368.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:29.204Z,1513214369.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:29.599Z,1513214369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:29.996Z,1513214369.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:30.435Z,1513214370.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:30.807Z,1513214370.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:31.212Z,1513214371.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:31.599Z,1513214371.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:32.007Z,1513214372.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:32.400Z,1513214372.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:32.847Z,1513214372.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:33.315Z,1513214373.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:33.640Z,1513214373.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:34.049Z,1513214374.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:34.398Z,1513214374.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:34.823Z,1513214374.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:35.271Z,1513214375.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:35.587Z,1513214375.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:35.988Z,1513214375.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:36.418Z,1513214376.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:36.934Z,1513214376.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:37.203Z,1513214377.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:37.597Z,1513214377.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:37.994Z,1513214377.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:38.395Z,1513214378.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:38.792Z,1513214378.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:39.203Z,1513214379.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:39.624Z,1513214379.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:39.998Z,1513214379.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:40.399Z,1513214380.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:40.794Z,1513214380.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:41.200Z,1513214381.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:41.594Z,1513214381.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:42.008Z,1513214382.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:42.396Z,1513214382.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:42.803Z,1513214382.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:43.266Z,1513214383.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:43.607Z,1513214383.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:44.001Z,1513214384.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:44.402Z,1513214384.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:44.800Z,1513214384.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:45.208Z,1513214385.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:45.608Z,1513214385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:46.110Z,1513214386.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:46.434Z,1513214386.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:46.807Z,1513214386.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:47.243Z,1513214387.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:47.623Z,1513214387.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:48.003Z,1513214388.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:48.395Z,1513214388.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:48.803Z,1513214388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:49.258Z,1513214389.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:49.657Z,1513214389.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:49.995Z,1513214389.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:50.404Z,1513214390.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:50.796Z,1513214390.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:51.214Z,1513214391.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:51.620Z,1513214391.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:52.008Z,1513214392.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:52.405Z,1513214392.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:52.806Z,1513214392.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:52.842Z,1513214392.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:53.179Z,1513214393.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:53.195Z,1513214393.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:53.574Z,1513214393.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:53.601Z,1513214393.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:53.995Z,1513214393.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:54.015Z,1513214394.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:54.394Z,1513214394.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:54.408Z,1513214394.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:54.793Z,1513214394.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:54.808Z,1513214394.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:55.172Z,1513214395.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:55.243Z,1513214395.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:55.570Z,1513214395.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:55.627Z,1513214395.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:55.974Z,1513214395.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:19:56.007Z,1513214396.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:56.411Z,1513214396.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:56.827Z,1513214396.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:57.227Z,1513214397.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:57.634Z,1513214397.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:57.000Z,1513214398.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:58.397Z,1513214398.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:58.799Z,1513214398.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:59.232Z,1513214399.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:19:59.595Z,1513214399.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:00.006Z,1513214400.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:00.404Z,1513214400.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:00.811Z,1513214400.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:01.264Z,1513214401.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:01.599Z,1513214401.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:01.999Z,1513214401.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:02.432Z,1513214402.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:02.802Z,1513214402.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:03.276Z,1513214403.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:03.609Z,1513214403.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:04.008Z,1513214404.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:04.400Z,1513214404.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:04.791Z,1513214404.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:05.202Z,1513214405.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:05.615Z,1513214405.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:06.040Z,1513214406.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:06.421Z,1513214406.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:06.810Z,1513214406.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:07.202Z,1513214407.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:07.595Z,1513214407.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:08.009Z,1513214408.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:08.397Z,1513214408.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:08.843Z,1513214408.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:09.207Z,1513214409.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:09.613Z,1513214409.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:10.011Z,1513214410.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:10.384Z,1513214410.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:10.782Z,1513214410.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:11.206Z,1513214411.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:11.615Z,1513214411.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:12.009Z,1513214412.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:12.009Z,1513214412.009 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2017-12-14T01:20:12.009Z,1513214412.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:20:12.011Z,1513214412.011 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:12.011Z,1513214412.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2017-12-14T01:20:12.011Z,1513214412.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:20:12.014Z,1513214412.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:12.014Z,1513214412.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-12-14T01:20:12.014Z,1513214412.014 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:20:12.026Z,1513214412.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:20:12.026Z,1513214412.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:20:12.026Z,1513214412.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:20:12.430Z,1513214412.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:20:12.430Z,1513214412.430 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2017-12-14T01:20:12.431Z,1513214412.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:20:12.431Z,1513214412.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2017-12-14T01:20:12.431Z,1513214412.431 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:20:12.431Z,1513214412.431 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-12-14T01:20:12.818Z,1513214412.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:20:12.819Z,1513214412.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:20:12.819Z,1513214412.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:20:12.820Z,1513214412.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:20:12.820Z,1513214412.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:20:12.820Z,1513214412.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:20:12.821Z,1513214412.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:20:12.821Z,1513214412.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:20:12.821Z,1513214412.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:20:13.193Z,1513214413.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:13.597Z,1513214413.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:13.996Z,1513214413.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:14.393Z,1513214414.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:14.804Z,1513214414.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:15.280Z,1513214415.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:15.615Z,1513214415.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:16.023Z,1513214416.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:16.403Z,1513214416.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:16.406Z,1513214416.406 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:15:16.1Z
2017-12-14T01:20:16.406Z,1513214416.406 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T01:20:16.407Z,1513214416.407 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T01:20:16.795Z,1513214416.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:17.662Z,1513214417.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:17.798Z,1513214417.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:21.312Z,1513214421.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:21.390Z,1513214421.390 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0020.lzma
2017-12-14T01:20:21.454Z,1513214421.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:21.867Z,1513214421.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:22.161Z,1513214422.161 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0020.lzma.bak
2017-12-14T01:20:22.162Z,1513214422.162 [DataOverHttps](INFO): SBD MOMSN=5437323
2017-12-14T01:20:22.215Z,1513214422.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:23.820Z,1513214423.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:23.967Z,1513214423.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:27.717Z,1513214427.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:27.864Z,1513214427.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:28.200Z,1513214428.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:28.594Z,1513214428.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:28.995Z,1513214428.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:29.393Z,1513214429.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:32.830Z,1513214432.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:32.935Z,1513214432.935 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0021.lzma
2017-12-14T01:20:33.015Z,1513214433.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:33.347Z,1513214433.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:33.659Z,1513214433.659 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0021.lzma.bak
2017-12-14T01:20:33.659Z,1513214433.659 [DataOverHttps](INFO): SBD MOMSN=5437327
2017-12-14T01:20:33.735Z,1513214433.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:35.024Z,1513214435.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:35.028Z,1513214435.028 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T01:20:35.028Z,1513214435.028 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T01:20:35.028Z,1513214435.028 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T01:20:35.151Z,1513214435.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:38.492Z,1513214438.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:38.633Z,1513214438.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:39.016Z,1513214439.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:39.452Z,1513214439.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:39.795Z,1513214439.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:40.198Z,1513214440.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:40.599Z,1513214440.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:41.006Z,1513214441.006 [PNI_TCM](ERROR): CRC does not match. Expected:0x64672 got:0x26648
2017-12-14T01:20:41.046Z,1513214441.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:41.415Z,1513214441.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:41.811Z,1513214441.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:42.198Z,1513214442.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:42.583Z,1513214442.583 [PNI_TCM](ERROR): CRC does not match. Expected:0x261 got:0x16893
2017-12-14T01:20:42.615Z,1513214442.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:42.993Z,1513214442.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:43.515Z,1513214443.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:43.796Z,1513214443.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:44.191Z,1513214444.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:44.627Z,1513214444.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:44.987Z,1513214444.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:45.512Z,1513214445.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:45.791Z,1513214445.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:46.230Z,1513214446.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:46.603Z,1513214446.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:47.004Z,1513214447.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:47.395Z,1513214447.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:47.811Z,1513214447.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:48.202Z,1513214448.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:48.621Z,1513214448.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:49.016Z,1513214449.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:49.413Z,1513214449.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:49.792Z,1513214449.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:50.196Z,1513214450.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:50.607Z,1513214450.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:50.992Z,1513214450.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:51.399Z,1513214451.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:51.842Z,1513214451.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:52.214Z,1513214452.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:52.612Z,1513214452.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:53.017Z,1513214453.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:53.405Z,1513214453.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:53.799Z,1513214453.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:54.206Z,1513214454.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:54.627Z,1513214454.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:55.104Z,1513214455.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:55.405Z,1513214455.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:55.811Z,1513214455.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:56.174Z,1513214456.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:56.188Z,1513214456.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:56.576Z,1513214456.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:56.592Z,1513214456.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:56.977Z,1513214456.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:56.992Z,1513214456.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:57.385Z,1513214457.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:57.412Z,1513214457.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:57.773Z,1513214457.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:57.788Z,1513214457.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:58.190Z,1513214458.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:58.236Z,1513214458.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:58.585Z,1513214458.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:58.600Z,1513214458.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:58.982Z,1513214458.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:58.997Z,1513214458.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:59.375Z,1513214459.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:20:59.395Z,1513214459.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:20:59.803Z,1513214459.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:00.205Z,1513214460.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:00.595Z,1513214460.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:01.007Z,1513214461.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:01.427Z,1513214461.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:01.801Z,1513214461.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:02.203Z,1513214462.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:02.589Z,1513214462.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:02.991Z,1513214462.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:03.408Z,1513214463.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:03.789Z,1513214463.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:04.193Z,1513214464.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:04.635Z,1513214464.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:05.023Z,1513214465.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:05.400Z,1513214465.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:05.795Z,1513214465.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:06.235Z,1513214466.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:06.611Z,1513214466.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:07.007Z,1513214467.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:07.442Z,1513214467.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:07.858Z,1513214467.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:08.219Z,1513214468.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:08.595Z,1513214468.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:09.043Z,1513214469.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:09.395Z,1513214469.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:09.804Z,1513214469.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:10.207Z,1513214470.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:10.607Z,1513214470.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:11.035Z,1513214471.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:11.407Z,1513214471.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:11.803Z,1513214471.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:12.210Z,1513214472.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:12.608Z,1513214472.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:13.011Z,1513214473.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:13.399Z,1513214473.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:13.800Z,1513214473.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:14.229Z,1513214474.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:14.591Z,1513214474.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:15.010Z,1513214475.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:15.415Z,1513214475.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:15.807Z,1513214475.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:16.191Z,1513214476.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:16.616Z,1513214476.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:16.987Z,1513214476.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:17.424Z,1513214477.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:17.803Z,1513214477.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:18.196Z,1513214478.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:18.637Z,1513214478.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:19.011Z,1513214479.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:19.416Z,1513214479.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:19.811Z,1513214479.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:20.215Z,1513214480.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:20.623Z,1513214480.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:21.065Z,1513214481.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:21.432Z,1513214481.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:21.819Z,1513214481.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:22.234Z,1513214482.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:22.634Z,1513214482.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:23.023Z,1513214483.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:23.436Z,1513214483.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:23.848Z,1513214483.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:24.222Z,1513214484.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:24.674Z,1513214484.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:25.041Z,1513214485.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:25.411Z,1513214485.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:25.822Z,1513214485.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:26.249Z,1513214486.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:26.594Z,1513214486.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:27.019Z,1513214487.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:27.453Z,1513214487.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:27.834Z,1513214487.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:28.217Z,1513214488.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:28.647Z,1513214488.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:29.077Z,1513214489.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:29.420Z,1513214489.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:29.841Z,1513214489.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:30.215Z,1513214490.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:30.715Z,1513214490.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:31.008Z,1513214491.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:31.404Z,1513214491.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:31.819Z,1513214491.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:32.208Z,1513214492.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:32.613Z,1513214492.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:33.027Z,1513214493.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:33.428Z,1513214493.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:33.799Z,1513214493.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:34.252Z,1513214494.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:34.642Z,1513214494.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:35.014Z,1513214495.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:35.507Z,1513214495.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:35.827Z,1513214495.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:39.883Z,1513214499.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:40.023Z,1513214500.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:40.392Z,1513214500.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:40.783Z,1513214500.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:41.180Z,1513214501.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:41.586Z,1513214501.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:41.991Z,1513214501.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:42.392Z,1513214502.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:42.789Z,1513214502.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:43.188Z,1513214503.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:43.628Z,1513214503.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:43.991Z,1513214503.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:44.384Z,1513214504.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:44.808Z,1513214504.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:45.234Z,1513214505.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:45.589Z,1513214505.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:45.989Z,1513214505.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:46.384Z,1513214506.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:46.821Z,1513214506.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:47.184Z,1513214507.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:47.591Z,1513214507.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:47.991Z,1513214507.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:48.410Z,1513214508.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:48.784Z,1513214508.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:49.243Z,1513214509.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:49.583Z,1513214509.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:49.987Z,1513214509.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:50.383Z,1513214510.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:50.784Z,1513214510.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:51.191Z,1513214511.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:51.595Z,1513214511.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:52.035Z,1513214512.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:52.395Z,1513214512.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:52.807Z,1513214512.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:53.187Z,1513214513.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:53.599Z,1513214513.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:53.998Z,1513214513.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:54.399Z,1513214514.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:54.798Z,1513214514.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:55.169Z,1513214515.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:55.617Z,1513214515.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:55.979Z,1513214515.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:56.378Z,1513214516.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:56.778Z,1513214516.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:57.188Z,1513214517.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:57.585Z,1513214517.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:57.984Z,1513214517.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:58.378Z,1513214518.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:58.788Z,1513214518.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:59.187Z,1513214519.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:59.580Z,1513214519.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:21:59.992Z,1513214519.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:00.388Z,1513214520.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:00.784Z,1513214520.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:01.176Z,1513214521.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:01.587Z,1513214521.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:02.013Z,1513214522.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:02.381Z,1513214522.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:02.790Z,1513214522.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:03.195Z,1513214523.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:03.603Z,1513214523.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:03.992Z,1513214523.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:04.379Z,1513214524.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:04.780Z,1513214524.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:05.224Z,1513214525.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:05.602Z,1513214525.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:05.999Z,1513214525.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:06.403Z,1513214526.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:06.788Z,1513214526.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:07.179Z,1513214527.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:07.589Z,1513214527.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:07.984Z,1513214527.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:08.476Z,1513214528.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:08.792Z,1513214528.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:09.192Z,1513214529.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:09.602Z,1513214529.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:10.003Z,1513214530.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:10.402Z,1513214530.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:10.790Z,1513214530.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:11.176Z,1513214531.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:11.580Z,1513214531.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:11.999Z,1513214531.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:12.442Z,1513214532.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:12.802Z,1513214532.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:13.178Z,1513214533.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:13.579Z,1513214533.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:14.000Z,1513214534.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:14.385Z,1513214534.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:14.827Z,1513214534.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:15.203Z,1513214535.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:15.599Z,1513214535.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:16.045Z,1513214536.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:16.374Z,1513214536.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:16.795Z,1513214536.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:17.178Z,1513214537.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:17.579Z,1513214537.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:18.004Z,1513214538.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:18.402Z,1513214538.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:18.805Z,1513214538.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:19.201Z,1513214539.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:19.581Z,1513214539.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:19.980Z,1513214539.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:20.386Z,1513214540.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:20.788Z,1513214540.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:21.294Z,1513214541.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:21.593Z,1513214541.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:21.996Z,1513214541.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:22.388Z,1513214542.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:22.782Z,1513214542.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:23.186Z,1513214543.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:23.581Z,1513214543.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:23.996Z,1513214543.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:24.416Z,1513214544.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:24.788Z,1513214544.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:25.179Z,1513214545.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:25.587Z,1513214545.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:25.983Z,1513214545.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:26.386Z,1513214546.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:26.915Z,1513214546.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:27.202Z,1513214547.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:27.627Z,1513214547.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:27.995Z,1513214547.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:28.391Z,1513214548.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:28.764Z,1513214548.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:29.171Z,1513214549.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:29.600Z,1513214549.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:29.997Z,1513214549.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:30.400Z,1513214550.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:30.807Z,1513214550.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:31.211Z,1513214551.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:31.590Z,1513214551.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:31.990Z,1513214551.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:32.388Z,1513214552.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:32.836Z,1513214552.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:33.143Z,1513214553.143 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:22:33.143Z,1513214553.143 [NAL9602] Data Fault, FailCount= 5
2017-12-14T01:22:33.143Z,1513214553.143 [NAL9602](ERROR): Data Fault
2017-12-14T01:22:33.196Z,1513214553.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:33.222Z,1513214553.222 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:22:33.222Z,1513214553.222 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T01:22:33.546Z,1513214553.546 [NAL9602](INFO): Powering down
2017-12-14T01:22:33.608Z,1513214553.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:33.620Z,1513214553.620 [CBIT](INFO): Critical error at 20171214T012233
2017-12-14T01:22:33.976Z,1513214553.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:34.379Z,1513214554.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:34.775Z,1513214554.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:35.269Z,1513214555.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:35.585Z,1513214555.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:36.026Z,1513214556.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:39.542Z,1513214559.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:39.664Z,1513214559.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:40.044Z,1513214560.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:40.441Z,1513214560.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:40.928Z,1513214560.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:41.247Z,1513214561.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:41.679Z,1513214561.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:42.048Z,1513214562.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:42.450Z,1513214562.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:42.849Z,1513214562.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:43.236Z,1513214563.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:43.707Z,1513214563.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:44.047Z,1513214564.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:44.435Z,1513214564.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:44.847Z,1513214564.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:45.254Z,1513214565.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:45.646Z,1513214565.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:46.047Z,1513214566.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:46.448Z,1513214566.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:46.863Z,1513214566.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:47.328Z,1513214567.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:47.642Z,1513214567.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:48.040Z,1513214568.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:48.444Z,1513214568.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:48.842Z,1513214568.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:49.310Z,1513214569.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:49.647Z,1513214569.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:50.067Z,1513214570.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:50.440Z,1513214570.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:50.839Z,1513214570.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:51.312Z,1513214571.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:51.641Z,1513214571.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:52.038Z,1513214572.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:52.442Z,1513214572.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:52.833Z,1513214572.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:53.295Z,1513214573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:53.653Z,1513214573.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:54.042Z,1513214574.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:54.446Z,1513214574.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:54.847Z,1513214574.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:55.246Z,1513214575.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:55.652Z,1513214575.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:56.046Z,1513214576.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:56.484Z,1513214576.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:56.855Z,1513214576.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:57.244Z,1513214577.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:57.643Z,1513214577.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:58.123Z,1513214578.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:58.442Z,1513214578.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:58.847Z,1513214578.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:59.250Z,1513214579.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:22:59.665Z,1513214579.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:00.052Z,1513214580.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:00.455Z,1513214580.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:00.857Z,1513214580.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:01.243Z,1513214581.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:01.641Z,1513214581.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:02.087Z,1513214582.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:02.440Z,1513214582.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:02.925Z,1513214582.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:03.315Z,1513214583.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:03.653Z,1513214583.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:04.071Z,1513214584.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:04.438Z,1513214584.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:04.868Z,1513214584.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:05.321Z,1513214585.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:05.655Z,1513214585.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:06.102Z,1513214586.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:06.455Z,1513214586.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:06.829Z,1513214586.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:07.240Z,1513214587.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:07.640Z,1513214587.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:08.038Z,1513214588.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:08.438Z,1513214588.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:08.845Z,1513214588.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:09.267Z,1513214589.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:09.659Z,1513214589.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:10.036Z,1513214590.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:10.433Z,1513214590.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:10.837Z,1513214590.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:11.246Z,1513214591.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:11.652Z,1513214591.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.042Z,1513214592.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.520Z,1513214592.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.847Z,1513214592.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.847Z,1513214592.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2017-12-14T01:23:12.847Z,1513214592.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:23:12.848Z,1513214592.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.849Z,1513214592.849 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2017-12-14T01:23:12.849Z,1513214592.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:23:12.851Z,1513214592.851 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:12.851Z,1513214592.851 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-12-14T01:23:12.851Z,1513214592.851 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:23:12.932Z,1513214592.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:23:12.937Z,1513214592.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:23:12.937Z,1513214592.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:23:13.263Z,1513214593.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:23:13.263Z,1513214593.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2017-12-14T01:23:13.264Z,1513214593.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:23:13.264Z,1513214593.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2017-12-14T01:23:13.264Z,1513214593.264 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:23:13.265Z,1513214593.265 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-12-14T01:23:13.651Z,1513214593.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:23:13.652Z,1513214593.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:23:13.652Z,1513214593.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:23:13.652Z,1513214593.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:23:13.653Z,1513214593.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:23:13.653Z,1513214593.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:23:13.653Z,1513214593.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:23:13.654Z,1513214593.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:23:13.654Z,1513214593.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:23:14.059Z,1513214594.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:14.434Z,1513214594.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:14.836Z,1513214594.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:15.239Z,1513214595.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:15.659Z,1513214595.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:16.042Z,1513214596.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:16.435Z,1513214596.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:16.841Z,1513214596.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:17.316Z,1513214597.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:17.638Z,1513214597.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:18.042Z,1513214598.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:18.435Z,1513214598.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:18.887Z,1513214598.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:19.288Z,1513214599.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:19.642Z,1513214599.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:20.044Z,1513214600.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:20.443Z,1513214600.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:20.847Z,1513214600.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:21.254Z,1513214601.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:21.645Z,1513214601.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:22.091Z,1513214602.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:22.454Z,1513214602.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:22.831Z,1513214602.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:23.275Z,1513214603.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:23.676Z,1513214603.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:24.043Z,1513214604.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:24.472Z,1513214604.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:24.841Z,1513214604.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:25.295Z,1513214605.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:25.654Z,1513214605.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:26.068Z,1513214606.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:26.467Z,1513214606.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:26.855Z,1513214606.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:27.238Z,1513214607.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:27.638Z,1513214607.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:28.036Z,1513214608.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:28.490Z,1513214608.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:28.840Z,1513214608.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:29.242Z,1513214609.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:29.641Z,1513214609.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:30.048Z,1513214610.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:30.441Z,1513214610.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:30.834Z,1513214610.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:31.315Z,1513214611.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:31.680Z,1513214611.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:32.056Z,1513214612.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:32.455Z,1513214612.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:32.832Z,1513214612.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:33.299Z,1513214613.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:33.637Z,1513214613.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:34.037Z,1513214614.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:34.470Z,1513214614.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:34.978Z,1513214614.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:35.238Z,1513214615.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:35.642Z,1513214615.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:36.039Z,1513214616.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:39.823Z,1513214619.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:39.947Z,1513214619.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:40.337Z,1513214620.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:40.697Z,1513214620.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:41.101Z,1513214621.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:41.500Z,1513214621.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:41.894Z,1513214621.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:42.299Z,1513214622.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:42.692Z,1513214622.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:43.099Z,1513214623.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:43.493Z,1513214623.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:43.896Z,1513214623.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:44.298Z,1513214624.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:44.685Z,1513214624.685 [BPC1](ERROR): Failed to parse message.
2017-12-14T01:23:44.685Z,1513214624.685 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:23:44.686Z,1513214624.686 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:23:44.686Z,1513214624.686 [BPC1](ERROR): Data Fault
2017-12-14T01:23:44.696Z,1513214624.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:44.710Z,1513214624.710 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:23:45.096Z,1513214625.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:45.502Z,1513214625.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:45.897Z,1513214625.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:45.910Z,1513214625.910 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:23:45.911Z,1513214625.911 [BPC1] No Fault, FailCount= 1
2017-12-14T01:23:46.351Z,1513214626.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:46.697Z,1513214626.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:47.096Z,1513214627.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:47.563Z,1513214627.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:47.892Z,1513214627.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:48.297Z,1513214628.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:48.693Z,1513214628.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:49.098Z,1513214629.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:49.492Z,1513214629.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:49.895Z,1513214629.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:50.296Z,1513214630.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:50.716Z,1513214630.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:51.084Z,1513214631.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:51.484Z,1513214631.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:51.889Z,1513214631.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:52.292Z,1513214632.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:52.682Z,1513214632.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:53.115Z,1513214633.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:53.491Z,1513214633.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:53.886Z,1513214633.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:54.306Z,1513214634.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:54.720Z,1513214634.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:55.097Z,1513214635.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:55.497Z,1513214635.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:55.899Z,1513214635.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:56.297Z,1513214636.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:56.697Z,1513214636.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:57.147Z,1513214637.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:57.500Z,1513214637.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:57.902Z,1513214637.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:58.301Z,1513214638.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:58.703Z,1513214638.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:59.106Z,1513214639.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:59.507Z,1513214639.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:23:59.882Z,1513214639.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:00.333Z,1513214640.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:00.705Z,1513214640.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:01.087Z,1513214641.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:01.492Z,1513214641.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:01.892Z,1513214641.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:02.292Z,1513214642.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:02.697Z,1513214642.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:03.095Z,1513214643.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:03.541Z,1513214643.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:03.892Z,1513214643.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:04.291Z,1513214644.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:04.695Z,1513214644.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:05.099Z,1513214645.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:05.538Z,1513214645.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:05.894Z,1513214645.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:06.292Z,1513214646.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:06.747Z,1513214646.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:07.094Z,1513214647.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:07.494Z,1513214647.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:07.901Z,1513214647.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:08.291Z,1513214648.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:08.688Z,1513214648.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:09.099Z,1513214649.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:09.524Z,1513214649.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:09.884Z,1513214649.884 [BPC1](ERROR): Failed to receive battery data
2017-12-14T01:24:09.884Z,1513214649.884 [BPC1] Communications Fault, FailCount= 2
2017-12-14T01:24:09.884Z,1513214649.884 [BPC1](ERROR): Communications Fault
2017-12-14T01:24:09.892Z,1513214649.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:09.907Z,1513214649.907 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T01:24:10.319Z,1513214650.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:10.697Z,1513214650.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:11.100Z,1513214651.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:11.114Z,1513214651.114 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:24:11.114Z,1513214651.114 [BPC1] No Fault, FailCount= 2
2017-12-14T01:24:11.551Z,1513214651.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:11.893Z,1513214651.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:12.306Z,1513214652.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:12.709Z,1513214652.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:13.176Z,1513214653.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:13.502Z,1513214653.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:13.899Z,1513214653.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:14.299Z,1513214654.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:14.694Z,1513214654.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:15.100Z,1513214655.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:15.503Z,1513214655.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:15.895Z,1513214655.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:16.291Z,1513214656.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:16.692Z,1513214656.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:17.092Z,1513214657.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:17.496Z,1513214657.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:17.896Z,1513214657.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:18.289Z,1513214658.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:18.687Z,1513214658.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:19.084Z,1513214659.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:19.484Z,1513214659.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:19.958Z,1513214659.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:20.306Z,1513214660.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:20.708Z,1513214660.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:21.104Z,1513214661.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:21.493Z,1513214661.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:21.888Z,1513214661.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:22.289Z,1513214662.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:22.679Z,1513214662.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:23.090Z,1513214663.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:23.495Z,1513214663.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:23.892Z,1513214663.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:24.286Z,1513214664.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:24.695Z,1513214664.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:25.089Z,1513214665.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:25.499Z,1513214665.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:25.935Z,1513214665.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:26.292Z,1513214666.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:26.693Z,1513214666.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:27.097Z,1513214667.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:27.492Z,1513214667.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:27.892Z,1513214667.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:28.298Z,1513214668.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:28.691Z,1513214668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:29.140Z,1513214669.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:29.502Z,1513214669.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:29.901Z,1513214669.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:30.298Z,1513214670.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:30.720Z,1513214670.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:31.105Z,1513214671.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:31.502Z,1513214671.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:31.923Z,1513214671.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:32.281Z,1513214672.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:32.724Z,1513214672.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:33.104Z,1513214673.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:33.506Z,1513214673.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:33.519Z,1513214673.519 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:24:33.519Z,1513214673.519 [NAL9602] No Fault, FailCount= 5
2017-12-14T01:24:33.851Z,1513214673.851 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:24:33.884Z,1513214673.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:34.288Z,1513214674.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:34.682Z,1513214674.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:35.107Z,1513214675.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:35.560Z,1513214675.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:35.892Z,1513214675.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:36.287Z,1513214676.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:39.966Z,1513214679.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:40.086Z,1513214680.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:40.433Z,1513214680.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:40.861Z,1513214680.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:41.321Z,1513214681.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:41.642Z,1513214681.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:42.042Z,1513214682.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:42.440Z,1513214682.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:42.844Z,1513214682.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:43.300Z,1513214683.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:43.655Z,1513214683.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:44.046Z,1513214684.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:44.454Z,1513214684.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:44.798Z,1513214684.798 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:24:44.883Z,1513214684.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:45.232Z,1513214685.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:45.659Z,1513214685.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:46.049Z,1513214686.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:46.456Z,1513214686.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:46.839Z,1513214686.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:47.242Z,1513214687.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:47.644Z,1513214687.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:48.042Z,1513214688.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:48.463Z,1513214688.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:48.944Z,1513214688.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:49.258Z,1513214689.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:49.648Z,1513214689.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:50.050Z,1513214690.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:50.442Z,1513214690.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:50.834Z,1513214690.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:51.281Z,1513214691.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:51.694Z,1513214691.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:52.051Z,1513214692.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:52.449Z,1513214692.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:52.867Z,1513214692.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:53.246Z,1513214693.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:53.643Z,1513214693.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:54.074Z,1513214694.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:54.476Z,1513214694.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:54.876Z,1513214694.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:55.299Z,1513214695.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:55.655Z,1513214695.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:56.056Z,1513214696.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:56.459Z,1513214696.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:56.832Z,1513214696.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:57.311Z,1513214697.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:57.659Z,1513214697.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:58.057Z,1513214698.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:58.432Z,1513214698.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:58.928Z,1513214698.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:59.227Z,1513214699.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:24:59.658Z,1513214699.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:00.037Z,1513214700.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:00.444Z,1513214700.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:00.935Z,1513214700.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:01.248Z,1513214701.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:01.648Z,1513214701.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:02.026Z,1513214702.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:02.441Z,1513214702.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:02.836Z,1513214702.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:03.275Z,1513214703.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:03.664Z,1513214703.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:04.036Z,1513214704.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:04.439Z,1513214704.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:04.840Z,1513214704.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:05.239Z,1513214705.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:05.644Z,1513214705.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:06.042Z,1513214706.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:06.446Z,1513214706.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:06.853Z,1513214706.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:07.272Z,1513214707.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:07.652Z,1513214707.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:08.031Z,1513214708.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:08.454Z,1513214708.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:08.845Z,1513214708.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:09.370Z,1513214709.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:09.656Z,1513214709.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:10.051Z,1513214710.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:10.472Z,1513214710.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:10.847Z,1513214710.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:11.300Z,1513214711.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:11.631Z,1513214711.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:12.032Z,1513214712.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:12.459Z,1513214712.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:12.924Z,1513214712.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:13.240Z,1513214713.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:13.654Z,1513214713.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:14.078Z,1513214714.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:14.439Z,1513214714.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:14.841Z,1513214714.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:15.272Z,1513214715.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:15.658Z,1513214715.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:16.051Z,1513214716.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:16.467Z,1513214716.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:16.919Z,1513214716.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:17.271Z,1513214717.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:17.655Z,1513214717.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:18.028Z,1513214718.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:18.454Z,1513214718.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:18.835Z,1513214718.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:19.267Z,1513214719.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:19.635Z,1513214719.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:20.034Z,1513214720.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:20.440Z,1513214720.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:20.842Z,1513214720.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:21.301Z,1513214721.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:21.648Z,1513214721.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:22.048Z,1513214722.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:22.445Z,1513214722.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:22.850Z,1513214722.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:23.363Z,1513214723.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:23.633Z,1513214723.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:24.044Z,1513214724.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:24.444Z,1513214724.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:24.841Z,1513214724.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:25.338Z,1513214725.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:25.642Z,1513214725.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:26.045Z,1513214726.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:26.450Z,1513214726.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:26.931Z,1513214726.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:27.262Z,1513214727.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:27.636Z,1513214727.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:28.036Z,1513214728.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:28.436Z,1513214728.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:28.914Z,1513214728.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:29.243Z,1513214729.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:29.725Z,1513214729.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:30.049Z,1513214730.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:30.438Z,1513214730.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:30.844Z,1513214730.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:31.235Z,1513214731.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:31.639Z,1513214731.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:32.041Z,1513214732.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:32.449Z,1513214732.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:32.959Z,1513214732.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:33.264Z,1513214733.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:33.647Z,1513214733.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:34.046Z,1513214734.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:34.455Z,1513214734.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:34.829Z,1513214734.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:35.267Z,1513214735.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:35.270Z,1513214735.270 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:25:35.271Z,1513214735.271 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:25:35.271Z,1513214735.271 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:25:35.271Z,1513214735.271 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:25:35.675Z,1513214735.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:35.679Z,1513214735.679 [Default:CheckIn:D] Stopped
2017-12-14T01:25:35.679Z,1513214735.679 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:25:36.154Z,1513214736.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:36.162Z,1513214736.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.338143 min 
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn:E] Stopped
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn] Stopped
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn](INFO): Running loop #6
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn] Running Loop=6
2017-12-14T01:25:36.163Z,1513214736.163 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:25:36.164Z,1513214736.164 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:25:36.466Z,1513214736.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:40.029Z,1513214740.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:40.127Z,1513214740.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:40.540Z,1513214740.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:40.995Z,1513214740.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:41.339Z,1513214741.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:41.752Z,1513214741.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:42.135Z,1513214742.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:42.571Z,1513214742.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:42.997Z,1513214742.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:43.328Z,1513214743.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:43.724Z,1513214743.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:44.124Z,1513214744.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:44.520Z,1513214744.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:44.978Z,1513214744.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:45.336Z,1513214745.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:45.751Z,1513214745.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:46.130Z,1513214746.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:46.536Z,1513214746.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:46.978Z,1513214746.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:47.321Z,1513214747.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:47.723Z,1513214747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:48.120Z,1513214748.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:48.531Z,1513214748.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:49.042Z,1513214749.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:49.331Z,1513214749.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:49.723Z,1513214749.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:50.112Z,1513214750.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:50.546Z,1513214750.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:50.954Z,1513214750.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:51.352Z,1513214751.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:51.752Z,1513214751.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:52.143Z,1513214752.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:52.534Z,1513214752.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:52.913Z,1513214752.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:53.352Z,1513214753.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:53.714Z,1513214753.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:54.147Z,1513214754.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:54.536Z,1513214754.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:54.988Z,1513214754.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:55.363Z,1513214755.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:55.720Z,1513214755.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:56.191Z,1513214756.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:56.544Z,1513214756.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:56.995Z,1513214756.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:57.390Z,1513214757.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:57.748Z,1513214757.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:58.164Z,1513214758.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:58.520Z,1513214758.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:58.972Z,1513214758.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:59.353Z,1513214759.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:25:59.715Z,1513214759.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:00.131Z,1513214760.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:00.535Z,1513214760.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:00.967Z,1513214760.967 [BPC1](ERROR): Failed to parse message.
2017-12-14T01:26:00.967Z,1513214760.967 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:26:00.968Z,1513214760.968 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:26:00.968Z,1513214760.968 [BPC1](ERROR): Data Fault
2017-12-14T01:26:00.980Z,1513214760.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:01.023Z,1513214761.023 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:26:01.363Z,1513214761.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:01.724Z,1513214761.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:02.129Z,1513214762.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:02.142Z,1513214762.142 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:26:02.142Z,1513214762.142 [BPC1] No Fault, FailCount= 1
2017-12-14T01:26:02.591Z,1513214762.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:03.002Z,1513214763.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:03.348Z,1513214763.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:03.715Z,1513214763.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:04.137Z,1513214764.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:04.539Z,1513214764.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:04.932Z,1513214764.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:05.340Z,1513214765.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:05.716Z,1513214765.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:06.128Z,1513214766.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:06.531Z,1513214766.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:06.924Z,1513214766.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:07.324Z,1513214767.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:07.727Z,1513214767.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:08.135Z,1513214768.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:08.538Z,1513214768.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:08.982Z,1513214768.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:09.327Z,1513214769.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:09.725Z,1513214769.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:10.139Z,1513214770.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:10.539Z,1513214770.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:11.007Z,1513214771.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:11.358Z,1513214771.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:11.790Z,1513214771.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:12.134Z,1513214772.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:12.527Z,1513214772.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.001Z,1513214773.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.351Z,1513214773.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.744Z,1513214773.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.744Z,1513214773.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2017-12-14T01:26:13.744Z,1513214773.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:26:13.746Z,1513214773.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.746Z,1513214773.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2017-12-14T01:26:13.747Z,1513214773.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:26:13.748Z,1513214773.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:13.749Z,1513214773.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-12-14T01:26:13.749Z,1513214773.749 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:26:13.767Z,1513214773.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:26:13.768Z,1513214773.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:26:13.768Z,1513214773.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:26:14.156Z,1513214774.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:26:14.156Z,1513214774.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2017-12-14T01:26:14.156Z,1513214774.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:26:14.156Z,1513214774.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2017-12-14T01:26:14.157Z,1513214774.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:26:14.157Z,1513214774.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-12-14T01:26:14.515Z,1513214774.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:26:14.516Z,1513214774.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:26:14.516Z,1513214774.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:26:14.517Z,1513214774.517 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:26:14.517Z,1513214774.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:26:14.518Z,1513214774.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:26:14.518Z,1513214774.518 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:26:14.518Z,1513214774.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:26:14.519Z,1513214774.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:26:14.980Z,1513214774.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:15.332Z,1513214775.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:15.723Z,1513214775.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:16.149Z,1513214776.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:16.540Z,1513214776.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:17.008Z,1513214777.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:17.331Z,1513214777.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:17.723Z,1513214777.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:18.134Z,1513214778.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:18.535Z,1513214778.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:18.969Z,1513214778.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:19.340Z,1513214779.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:19.727Z,1513214779.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:20.144Z,1513214780.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:20.555Z,1513214780.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:20.964Z,1513214780.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:21.451Z,1513214781.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:21.774Z,1513214781.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:22.178Z,1513214782.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:22.609Z,1513214782.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:23.074Z,1513214783.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:23.353Z,1513214783.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:23.791Z,1513214783.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:24.203Z,1513214784.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:24.587Z,1513214784.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:25.060Z,1513214785.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:25.357Z,1513214785.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:25.728Z,1513214785.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:26.148Z,1513214786.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:26.548Z,1513214786.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:26.971Z,1513214786.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:27.333Z,1513214787.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:27.759Z,1513214787.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:28.206Z,1513214788.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:28.556Z,1513214788.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:28.987Z,1513214788.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:29.339Z,1513214789.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:29.715Z,1513214789.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:30.158Z,1513214790.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:30.518Z,1513214790.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:31.056Z,1513214791.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:31.409Z,1513214791.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:31.776Z,1513214791.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:32.133Z,1513214792.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:32.575Z,1513214792.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:32.990Z,1513214792.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:33.372Z,1513214793.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:33.771Z,1513214793.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:34.143Z,1513214794.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:34.540Z,1513214794.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:34.919Z,1513214794.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:35.340Z,1513214795.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:35.789Z,1513214795.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:36.164Z,1513214796.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:36.544Z,1513214796.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:41.726Z,1513214801.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:41.836Z,1513214801.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:42.222Z,1513214802.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:42.622Z,1513214802.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:43.024Z,1513214803.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:43.428Z,1513214803.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:43.891Z,1513214803.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:44.235Z,1513214804.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:44.626Z,1513214804.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:45.026Z,1513214805.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:45.467Z,1513214805.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:45.825Z,1513214805.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:46.270Z,1513214806.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:46.632Z,1513214806.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:47.066Z,1513214807.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:47.427Z,1513214807.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:47.825Z,1513214807.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:48.227Z,1513214808.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:48.627Z,1513214808.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:49.025Z,1513214809.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:49.431Z,1513214809.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:49.831Z,1513214809.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:50.232Z,1513214810.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:50.627Z,1513214810.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:51.065Z,1513214811.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:51.426Z,1513214811.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:51.824Z,1513214811.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:52.226Z,1513214812.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:52.639Z,1513214812.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:53.027Z,1513214813.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:53.435Z,1513214813.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:53.828Z,1513214813.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:54.224Z,1513214814.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:54.629Z,1513214814.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:55.027Z,1513214815.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:55.478Z,1513214815.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:55.839Z,1513214815.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:56.236Z,1513214816.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:56.627Z,1513214816.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:57.054Z,1513214817.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:57.423Z,1513214817.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:57.830Z,1513214817.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:58.235Z,1513214818.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:58.633Z,1513214818.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:59.076Z,1513214819.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:59.427Z,1513214819.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:26:59.812Z,1513214819.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:00.263Z,1513214820.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:00.612Z,1513214820.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:01.007Z,1513214821.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:01.439Z,1513214821.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:01.835Z,1513214821.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:02.238Z,1513214822.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:02.616Z,1513214822.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:03.034Z,1513214823.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:03.476Z,1513214823.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:03.815Z,1513214823.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:04.221Z,1513214824.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:04.645Z,1513214824.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:05.050Z,1513214825.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:05.416Z,1513214825.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:05.816Z,1513214825.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:06.224Z,1513214826.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:06.696Z,1513214826.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:07.018Z,1513214827.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:07.453Z,1513214827.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:07.902Z,1513214827.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:08.232Z,1513214828.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:08.639Z,1513214828.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:09.028Z,1513214829.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:09.466Z,1513214829.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:09.835Z,1513214829.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:10.225Z,1513214830.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:10.624Z,1513214830.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:11.030Z,1513214831.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:11.424Z,1513214831.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:11.824Z,1513214831.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:12.220Z,1513214832.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:12.622Z,1513214832.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:13.084Z,1513214833.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:13.432Z,1513214833.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:13.835Z,1513214833.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:14.235Z,1513214834.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:14.627Z,1513214834.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:15.027Z,1513214835.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:15.414Z,1513214835.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:15.817Z,1513214835.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:16.263Z,1513214836.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:16.627Z,1513214836.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:17.031Z,1513214837.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:17.428Z,1513214837.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:17.851Z,1513214837.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:18.213Z,1513214838.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:18.622Z,1513214838.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:19.016Z,1513214839.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:19.483Z,1513214839.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:19.828Z,1513214839.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:20.227Z,1513214840.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:20.623Z,1513214840.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:21.015Z,1513214841.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:21.420Z,1513214841.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:21.827Z,1513214841.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:22.258Z,1513214842.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:22.677Z,1513214842.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:23.028Z,1513214843.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:23.423Z,1513214843.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:23.817Z,1513214843.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:24.222Z,1513214844.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:24.616Z,1513214844.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:25.018Z,1513214845.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:25.431Z,1513214845.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:25.887Z,1513214845.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:26.223Z,1513214846.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:26.629Z,1513214846.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:27.043Z,1513214847.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:27.423Z,1513214847.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:27.828Z,1513214847.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:28.239Z,1513214848.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:28.633Z,1513214848.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:29.071Z,1513214849.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:29.411Z,1513214849.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:29.871Z,1513214849.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:30.219Z,1513214850.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:30.641Z,1513214850.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:31.012Z,1513214851.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:31.459Z,1513214851.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:31.846Z,1513214851.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:32.247Z,1513214852.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:32.614Z,1513214852.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:33.019Z,1513214853.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:33.416Z,1513214853.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:33.819Z,1513214853.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:34.216Z,1513214854.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:34.616Z,1513214854.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:35.047Z,1513214855.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:35.423Z,1513214855.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:35.816Z,1513214855.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:36.223Z,1513214856.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:36.622Z,1513214856.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:40.120Z,1513214860.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:40.244Z,1513214860.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:40.624Z,1513214860.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:41.036Z,1513214861.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:41.399Z,1513214861.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:41.855Z,1513214861.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:42.203Z,1513214862.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:42.598Z,1513214862.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:42.998Z,1513214862.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:43.409Z,1513214863.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:43.805Z,1513214863.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:44.206Z,1513214864.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:44.591Z,1513214864.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:45.033Z,1513214865.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:45.418Z,1513214865.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:45.807Z,1513214865.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:46.215Z,1513214866.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:46.615Z,1513214866.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:47.008Z,1513214867.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:47.400Z,1513214867.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:47.812Z,1513214867.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:48.258Z,1513214868.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:48.605Z,1513214868.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:49.005Z,1513214869.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:49.417Z,1513214869.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:49.818Z,1513214869.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:50.200Z,1513214870.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:50.593Z,1513214870.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:50.999Z,1513214870.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:51.440Z,1513214871.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:51.803Z,1513214871.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:52.362Z,1513214872.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:52.609Z,1513214872.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:53.002Z,1513214873.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:53.423Z,1513214873.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:53.804Z,1513214873.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:54.219Z,1513214874.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:54.629Z,1513214874.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:55.028Z,1513214875.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:55.411Z,1513214875.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:55.811Z,1513214875.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:56.210Z,1513214876.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:56.607Z,1513214876.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:57.007Z,1513214877.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:57.406Z,1513214877.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:57.833Z,1513214877.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:58.215Z,1513214878.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:58.614Z,1513214878.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:59.012Z,1513214879.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:59.415Z,1513214879.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:27:59.814Z,1513214879.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:00.188Z,1513214880.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:00.610Z,1513214880.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:01.071Z,1513214881.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:01.430Z,1513214881.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:01.811Z,1513214881.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:02.240Z,1513214882.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:02.589Z,1513214882.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:03.014Z,1513214883.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:03.392Z,1513214883.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:03.796Z,1513214883.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:04.247Z,1513214884.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:04.600Z,1513214884.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:05.016Z,1513214885.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:05.421Z,1513214885.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:05.802Z,1513214885.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:06.192Z,1513214886.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:06.590Z,1513214886.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:06.995Z,1513214886.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:07.432Z,1513214887.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:07.821Z,1513214887.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:08.225Z,1513214888.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:08.595Z,1513214888.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:09.027Z,1513214889.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:09.399Z,1513214889.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:09.798Z,1513214889.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:10.208Z,1513214890.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:10.639Z,1513214890.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:11.012Z,1513214891.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:11.396Z,1513214891.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:11.800Z,1513214891.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:12.201Z,1513214892.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:12.599Z,1513214892.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:12.998Z,1513214892.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:13.404Z,1513214893.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:13.815Z,1513214893.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:14.280Z,1513214894.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:14.598Z,1513214894.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:15.041Z,1513214895.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:15.402Z,1513214895.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:15.823Z,1513214895.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:16.217Z,1513214896.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:16.639Z,1513214896.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:17.055Z,1513214897.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:17.392Z,1513214897.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:17.789Z,1513214897.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:18.194Z,1513214898.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:18.597Z,1513214898.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:18.994Z,1513214898.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:19.422Z,1513214899.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:19.804Z,1513214899.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:20.283Z,1513214900.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:20.592Z,1513214900.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:20.996Z,1513214900.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:21.408Z,1513214901.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:21.803Z,1513214901.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:22.202Z,1513214902.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:22.600Z,1513214902.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:23.037Z,1513214903.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:23.432Z,1513214903.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:23.809Z,1513214903.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:24.227Z,1513214904.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:24.610Z,1513214904.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:25.007Z,1513214905.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:25.421Z,1513214905.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:25.807Z,1513214905.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:26.210Z,1513214906.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:26.618Z,1513214906.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:26.000Z,1513214907.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:27.396Z,1513214907.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:27.798Z,1513214907.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:28.204Z,1513214908.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:28.611Z,1513214908.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:29.004Z,1513214909.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:29.404Z,1513214909.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:29.837Z,1513214909.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:30.198Z,1513214910.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:30.598Z,1513214910.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:30.999Z,1513214910.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:31.417Z,1513214911.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:31.808Z,1513214911.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:32.208Z,1513214912.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:32.597Z,1513214912.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:33.019Z,1513214913.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:33.399Z,1513214913.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:33.803Z,1513214913.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:34.211Z,1513214914.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:34.616Z,1513214914.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:35.005Z,1513214915.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:35.397Z,1513214915.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:35.807Z,1513214915.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:36.319Z,1513214916.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:36.604Z,1513214916.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:37.046Z,1513214917.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:40.447Z,1513214920.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:40.611Z,1513214920.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:40.920Z,1513214920.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:41.356Z,1513214921.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:41.720Z,1513214921.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:42.120Z,1513214922.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:42.524Z,1513214922.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:43.001Z,1513214923.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:43.355Z,1513214923.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:43.723Z,1513214923.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:44.125Z,1513214924.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:44.532Z,1513214924.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:44.998Z,1513214924.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:45.336Z,1513214925.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:45.739Z,1513214925.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:46.121Z,1513214926.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:46.532Z,1513214926.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:47.001Z,1513214927.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:47.334Z,1513214927.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:47.725Z,1513214927.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:48.121Z,1513214928.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:48.528Z,1513214928.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:49.015Z,1513214929.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:49.356Z,1513214929.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:49.751Z,1513214929.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:50.137Z,1513214930.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:50.519Z,1513214930.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:51.003Z,1513214931.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:51.362Z,1513214931.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:51.723Z,1513214931.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:52.132Z,1513214932.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:52.525Z,1513214932.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:52.959Z,1513214932.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:53.347Z,1513214933.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:53.723Z,1513214933.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:54.131Z,1513214934.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:54.538Z,1513214934.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:54.935Z,1513214934.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:55.368Z,1513214935.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:55.734Z,1513214935.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:56.133Z,1513214936.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:56.581Z,1513214936.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:56.984Z,1513214936.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:57.364Z,1513214937.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:57.728Z,1513214937.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:58.124Z,1513214938.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:58.578Z,1513214938.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:58.618Z,1513214938.618 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:28:58.995Z,1513214938.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:59.364Z,1513214939.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:59.741Z,1513214939.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:28:59.780Z,1513214939.780 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T01:28:59.780Z,1513214939.780 [DropWeight] No Fault, FailCount= 1
2017-12-14T01:29:00.126Z,1513214940.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:00.528Z,1513214940.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:00.999Z,1513214940.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:01.351Z,1513214941.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:01.733Z,1513214941.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:02.154Z,1513214942.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:02.587Z,1513214942.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:03.047Z,1513214943.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:03.366Z,1513214943.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:03.715Z,1513214943.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:04.115Z,1513214944.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:04.523Z,1513214944.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:04.980Z,1513214944.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:05.362Z,1513214945.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:05.732Z,1513214945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:06.132Z,1513214946.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:06.525Z,1513214946.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:06.923Z,1513214946.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:07.328Z,1513214947.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:07.722Z,1513214947.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:08.128Z,1513214948.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:08.574Z,1513214948.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:08.934Z,1513214948.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:09.330Z,1513214949.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:09.731Z,1513214949.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:10.134Z,1513214950.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:10.531Z,1513214950.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:10.983Z,1513214950.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:11.333Z,1513214951.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:11.759Z,1513214951.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:12.149Z,1513214952.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:12.547Z,1513214952.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:12.989Z,1513214952.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:13.359Z,1513214953.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:13.717Z,1513214953.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:14.147Z,1513214954.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:14.547Z,1513214954.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:14.547Z,1513214954.547 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2017-12-14T01:29:14.547Z,1513214954.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:29:14.549Z,1513214954.549 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:14.549Z,1513214954.549 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2017-12-14T01:29:14.549Z,1513214954.549 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:29:14.551Z,1513214954.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:14.551Z,1513214954.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-12-14T01:29:14.551Z,1513214954.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:29:14.571Z,1513214954.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:29:14.571Z,1513214954.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:29:14.571Z,1513214954.571 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:29:15.044Z,1513214955.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:29:15.044Z,1513214955.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2017-12-14T01:29:15.045Z,1513214955.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:29:15.045Z,1513214955.045 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2017-12-14T01:29:15.046Z,1513214955.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:29:15.046Z,1513214955.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-12-14T01:29:15.354Z,1513214955.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:29:15.355Z,1513214955.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:29:15.355Z,1513214955.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:29:15.355Z,1513214955.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:29:15.356Z,1513214955.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:29:15.356Z,1513214955.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:29:15.356Z,1513214955.356 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:29:15.357Z,1513214955.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:29:15.357Z,1513214955.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:29:15.722Z,1513214955.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:16.120Z,1513214956.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:16.523Z,1513214956.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:16.966Z,1513214956.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:17.374Z,1513214957.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:17.734Z,1513214957.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:18.132Z,1513214958.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:18.523Z,1513214958.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:18.995Z,1513214958.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:19.339Z,1513214959.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:19.730Z,1513214959.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:20.128Z,1513214960.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:20.555Z,1513214960.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:20.928Z,1513214960.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:21.383Z,1513214961.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:21.744Z,1513214961.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:22.138Z,1513214962.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:22.551Z,1513214962.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:22.938Z,1513214962.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:23.359Z,1513214963.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:23.760Z,1513214963.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:24.140Z,1513214964.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:24.610Z,1513214964.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:24.000Z,1513214965.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:25.383Z,1513214965.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:25.713Z,1513214965.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:26.128Z,1513214966.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:26.527Z,1513214966.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:26.952Z,1513214966.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:27.339Z,1513214967.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:27.776Z,1513214967.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:28.154Z,1513214968.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:28.535Z,1513214968.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:28.986Z,1513214968.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:29.331Z,1513214969.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:29.705Z,1513214969.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:30.147Z,1513214970.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:30.536Z,1513214970.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:31.043Z,1513214971.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:31.347Z,1513214971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:31.742Z,1513214971.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:32.143Z,1513214972.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:32.535Z,1513214972.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:33.007Z,1513214973.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:33.343Z,1513214973.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:33.780Z,1513214973.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:34.144Z,1513214974.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:34.524Z,1513214974.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:34.916Z,1513214974.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:35.325Z,1513214975.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:35.726Z,1513214975.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:36.124Z,1513214976.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:36.525Z,1513214976.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:36.931Z,1513214976.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:37.375Z,1513214977.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:40.841Z,1513214980.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:41.032Z,1513214981.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:41.423Z,1513214981.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:41.840Z,1513214981.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:42.205Z,1513214982.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:42.610Z,1513214982.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:43.007Z,1513214983.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:43.412Z,1513214983.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:43.818Z,1513214983.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:44.219Z,1513214984.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:44.613Z,1513214984.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:45.007Z,1513214985.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:45.409Z,1513214985.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:45.863Z,1513214985.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:46.221Z,1513214986.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:46.643Z,1513214986.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:47.056Z,1513214987.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:47.448Z,1513214987.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:47.814Z,1513214987.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:48.212Z,1513214988.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:48.610Z,1513214988.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:49.011Z,1513214989.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:49.420Z,1513214989.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:49.825Z,1513214989.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:50.263Z,1513214990.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:50.612Z,1513214990.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:51.012Z,1513214991.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:51.419Z,1513214991.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:51.792Z,1513214991.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:52.227Z,1513214992.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:52.626Z,1513214992.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:53.024Z,1513214993.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:53.428Z,1513214993.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:53.810Z,1513214993.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:54.209Z,1513214994.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:54.607Z,1513214994.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:55.002Z,1513214995.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:55.408Z,1513214995.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:55.879Z,1513214995.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:56.208Z,1513214996.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:56.656Z,1513214996.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:57.003Z,1513214997.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:57.415Z,1513214997.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:57.806Z,1513214997.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:58.208Z,1513214998.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:58.611Z,1513214998.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:59.011Z,1513214999.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:59.403Z,1513214999.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:29:59.844Z,1513214999.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:00.202Z,1513215000.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:00.612Z,1513215000.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:01.034Z,1513215001.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:01.414Z,1513215001.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:01.835Z,1513215001.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:02.234Z,1513215002.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:02.611Z,1513215002.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:03.015Z,1513215003.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:03.415Z,1513215003.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:03.811Z,1513215003.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:04.223Z,1513215004.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:04.458Z,1513215004.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:30:04.615Z,1513215004.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:05.016Z,1513215005.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:05.254Z,1513215005.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:30:05.407Z,1513215005.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:05.717Z,1513215005.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:30:05.806Z,1513215005.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:06.261Z,1513215006.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:06.603Z,1513215006.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:07.006Z,1513215007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:07.425Z,1513215007.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:07.874Z,1513215007.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:08.217Z,1513215008.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:08.655Z,1513215008.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:09.016Z,1513215009.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:09.460Z,1513215009.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:09.807Z,1513215009.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:10.264Z,1513215010.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:10.615Z,1513215010.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:11.005Z,1513215011.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:11.407Z,1513215011.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:11.852Z,1513215011.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:12.207Z,1513215012.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:12.630Z,1513215012.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:13.012Z,1513215013.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:13.423Z,1513215013.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:13.825Z,1513215013.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:14.218Z,1513215014.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:14.587Z,1513215014.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:15.033Z,1513215015.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:15.416Z,1513215015.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:15.870Z,1513215015.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:16.227Z,1513215016.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:16.624Z,1513215016.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:17.022Z,1513215017.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:17.419Z,1513215017.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:17.799Z,1513215017.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:18.203Z,1513215018.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:18.642Z,1513215018.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:19.074Z,1513215019.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:19.425Z,1513215019.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:19.834Z,1513215019.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:20.229Z,1513215020.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:20.608Z,1513215020.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:21.004Z,1513215021.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:21.414Z,1513215021.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:21.805Z,1513215021.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:22.243Z,1513215022.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:22.619Z,1513215022.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:23.019Z,1513215023.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:23.405Z,1513215023.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:23.808Z,1513215023.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:24.207Z,1513215024.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:24.612Z,1513215024.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:25.004Z,1513215025.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:25.460Z,1513215025.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:25.820Z,1513215025.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:26.216Z,1513215026.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:26.611Z,1513215026.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:27.007Z,1513215027.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:27.408Z,1513215027.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:27.808Z,1513215027.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:28.214Z,1513215028.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:28.652Z,1513215028.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:29.028Z,1513215029.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:29.409Z,1513215029.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:29.815Z,1513215029.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:30.251Z,1513215030.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:30.637Z,1513215030.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:31.012Z,1513215031.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:31.466Z,1513215031.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:31.840Z,1513215031.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:32.319Z,1513215032.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:32.610Z,1513215032.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:33.018Z,1513215033.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:33.420Z,1513215033.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:33.815Z,1513215033.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:34.223Z,1513215034.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:34.627Z,1513215034.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:35.050Z,1513215035.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:35.407Z,1513215035.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:35.826Z,1513215035.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:36.205Z,1513215036.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:36.225Z,1513215036.225 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:25:36.2Z
2017-12-14T01:30:36.225Z,1513215036.225 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T01:30:36.225Z,1513215036.225 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T01:30:36.603Z,1513215036.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:37.389Z,1513215037.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:37.531Z,1513215037.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:41.082Z,1513215041.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:41.161Z,1513215041.161 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0024.lzma
2017-12-14T01:30:41.239Z,1513215041.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:41.551Z,1513215041.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:41.907Z,1513215041.907 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0024.lzma.bak
2017-12-14T01:30:41.907Z,1513215041.907 [DataOverHttps](INFO): SBD MOMSN=5437331
2017-12-14T01:30:41.961Z,1513215041.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:43.246Z,1513215043.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:43.390Z,1513215043.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:46.828Z,1513215046.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:46.979Z,1513215046.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:47.352Z,1513215047.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:47.766Z,1513215047.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:48.122Z,1513215048.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:48.546Z,1513215048.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:52.096Z,1513215052.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:52.173Z,1513215052.173 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0025.lzma
2017-12-14T01:30:52.245Z,1513215052.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:52.624Z,1513215052.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:52.972Z,1513215052.972 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0025.lzma.bak
2017-12-14T01:30:52.972Z,1513215052.972 [DataOverHttps](INFO): SBD MOMSN=5437334
2017-12-14T01:30:53.122Z,1513215053.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:54.197Z,1513215054.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:54.205Z,1513215054.205 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T01:30:54.205Z,1513215054.205 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T01:30:54.205Z,1513215054.205 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T01:30:54.335Z,1513215054.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:57.824Z,1513215057.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:57.976Z,1513215057.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:58.359Z,1513215058.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:58.743Z,1513215058.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:59.131Z,1513215059.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:59.534Z,1513215059.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:30:59.922Z,1513215059.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:00.320Z,1513215060.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:00.760Z,1513215060.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:01.129Z,1513215061.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:01.522Z,1513215061.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:01.927Z,1513215061.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:02.321Z,1513215062.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:02.731Z,1513215062.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:03.131Z,1513215063.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:03.527Z,1513215063.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:03.961Z,1513215063.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:04.323Z,1513215064.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:04.767Z,1513215064.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:05.127Z,1513215065.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:05.531Z,1513215065.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:05.929Z,1513215065.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:06.326Z,1513215066.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:06.760Z,1513215066.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:07.171Z,1513215067.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:07.532Z,1513215067.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:07.930Z,1513215067.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:08.325Z,1513215068.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:08.722Z,1513215068.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:09.131Z,1513215069.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:09.536Z,1513215069.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:09.933Z,1513215069.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:10.359Z,1513215070.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:10.718Z,1513215070.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:11.123Z,1513215071.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:11.551Z,1513215071.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:11.931Z,1513215071.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:12.327Z,1513215072.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:12.720Z,1513215072.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:13.166Z,1513215073.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:13.589Z,1513215073.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:13.937Z,1513215073.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:14.335Z,1513215074.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:14.732Z,1513215074.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:15.134Z,1513215075.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:15.527Z,1513215075.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:15.927Z,1513215075.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:16.320Z,1513215076.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:16.803Z,1513215076.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:17.140Z,1513215077.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:17.592Z,1513215077.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:17.946Z,1513215077.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:18.341Z,1513215078.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:18.742Z,1513215078.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:19.195Z,1513215079.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:19.611Z,1513215079.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:19.979Z,1513215079.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:20.368Z,1513215080.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:20.735Z,1513215080.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:21.198Z,1513215081.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:21.548Z,1513215081.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:21.924Z,1513215081.924 [BPC1](ERROR): Failed to receive battery data
2017-12-14T01:31:21.925Z,1513215081.925 [BPC1] Communications Fault, FailCount= 1
2017-12-14T01:31:21.925Z,1513215081.925 [BPC1](ERROR): Communications Fault
2017-12-14T01:31:21.943Z,1513215081.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:21.998Z,1513215081.998 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T01:31:22.359Z,1513215082.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:22.739Z,1513215082.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:23.156Z,1513215083.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:23.221Z,1513215083.221 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:31:23.221Z,1513215083.221 [BPC1] No Fault, FailCount= 1
2017-12-14T01:31:23.631Z,1513215083.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:23.939Z,1513215083.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:24.323Z,1513215084.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:24.723Z,1513215084.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:25.169Z,1513215085.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:25.536Z,1513215085.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:25.932Z,1513215085.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:26.330Z,1513215086.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:26.722Z,1513215086.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:27.175Z,1513215087.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:27.539Z,1513215087.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:28.030Z,1513215088.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:28.329Z,1513215088.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:28.703Z,1513215088.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:29.140Z,1513215089.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:29.548Z,1513215089.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:29.986Z,1513215089.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:30.316Z,1513215090.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:30.762Z,1513215090.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:31.140Z,1513215091.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:31.585Z,1513215091.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:31.967Z,1513215091.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:32.323Z,1513215092.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:32.734Z,1513215092.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:33.188Z,1513215093.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:33.602Z,1513215093.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:33.972Z,1513215093.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:34.371Z,1513215094.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:34.764Z,1513215094.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:35.143Z,1513215095.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:35.539Z,1513215095.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:35.950Z,1513215095.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:36.348Z,1513215096.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:36.812Z,1513215096.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:37.162Z,1513215097.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:37.524Z,1513215097.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:37.927Z,1513215097.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:38.356Z,1513215098.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:38.727Z,1513215098.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:39.149Z,1513215099.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:39.716Z,1513215099.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:39.948Z,1513215099.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:40.348Z,1513215100.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:40.716Z,1513215100.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:41.143Z,1513215101.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:41.563Z,1513215101.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:41.971Z,1513215101.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:42.364Z,1513215102.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:42.787Z,1513215102.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:43.148Z,1513215103.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:43.559Z,1513215103.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:43.971Z,1513215103.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:44.361Z,1513215104.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:44.760Z,1513215104.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:45.135Z,1513215105.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:45.572Z,1513215105.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:45.944Z,1513215105.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:46.373Z,1513215106.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:46.747Z,1513215106.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:47.148Z,1513215107.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:47.593Z,1513215107.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:47.970Z,1513215107.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:48.335Z,1513215108.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:48.732Z,1513215108.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:49.159Z,1513215109.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:49.583Z,1513215109.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:49.932Z,1513215109.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:50.338Z,1513215110.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:50.715Z,1513215110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:51.143Z,1513215111.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:51.538Z,1513215111.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:51.920Z,1513215111.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:52.316Z,1513215112.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:52.798Z,1513215112.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:53.140Z,1513215113.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:53.532Z,1513215113.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:53.932Z,1513215113.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:54.323Z,1513215114.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:54.731Z,1513215114.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:58.371Z,1513215118.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:58.519Z,1513215118.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:58.952Z,1513215118.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:59.255Z,1513215119.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:31:59.648Z,1513215119.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:00.047Z,1513215120.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:00.489Z,1513215120.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:00.927Z,1513215120.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:01.265Z,1513215121.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:01.654Z,1513215121.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:02.049Z,1513215122.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:02.456Z,1513215122.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:02.911Z,1513215122.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:03.279Z,1513215123.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:03.662Z,1513215123.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:04.067Z,1513215124.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:04.463Z,1513215124.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:04.920Z,1513215124.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:05.251Z,1513215125.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:05.681Z,1513215125.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:06.082Z,1513215126.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:06.457Z,1513215126.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:06.886Z,1513215126.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:07.267Z,1513215127.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:07.647Z,1513215127.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:08.055Z,1513215128.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:08.444Z,1513215128.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:08.847Z,1513215128.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:09.321Z,1513215129.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:09.662Z,1513215129.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:10.062Z,1513215130.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:10.454Z,1513215130.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:10.853Z,1513215130.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:11.311Z,1513215131.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:11.683Z,1513215131.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:12.035Z,1513215132.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:12.464Z,1513215132.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:12.943Z,1513215132.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:13.270Z,1513215133.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:13.640Z,1513215133.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:14.040Z,1513215134.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:14.444Z,1513215134.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:14.990Z,1513215134.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:15.248Z,1513215135.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:15.671Z,1513215135.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:15.671Z,1513215135.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2017-12-14T01:32:15.671Z,1513215135.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:32:15.673Z,1513215135.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:15.674Z,1513215135.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2017-12-14T01:32:15.674Z,1513215135.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:32:15.675Z,1513215135.675 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:15.676Z,1513215135.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-12-14T01:32:15.676Z,1513215135.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:32:15.688Z,1513215135.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:32:15.688Z,1513215135.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:32:15.688Z,1513215135.688 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:32:16.086Z,1513215136.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:32:16.086Z,1513215136.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2017-12-14T01:32:16.087Z,1513215136.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:32:16.087Z,1513215136.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2017-12-14T01:32:16.087Z,1513215136.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:32:16.087Z,1513215136.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-12-14T01:32:16.443Z,1513215136.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:32:16.444Z,1513215136.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:32:16.444Z,1513215136.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:32:16.444Z,1513215136.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:32:16.445Z,1513215136.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:32:16.445Z,1513215136.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:32:16.446Z,1513215136.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:32:16.446Z,1513215136.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:32:16.446Z,1513215136.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:32:16.843Z,1513215136.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:17.256Z,1513215137.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:17.648Z,1513215137.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:18.050Z,1513215138.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:18.454Z,1513215138.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:18.914Z,1513215138.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:19.263Z,1513215139.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:19.661Z,1513215139.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:20.055Z,1513215140.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:20.439Z,1513215140.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:20.866Z,1513215140.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:21.291Z,1513215141.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:21.648Z,1513215141.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:22.059Z,1513215142.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:22.447Z,1513215142.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:22.847Z,1513215142.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:23.305Z,1513215143.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:23.668Z,1513215143.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:24.059Z,1513215144.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:24.510Z,1513215144.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:24.860Z,1513215144.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:25.352Z,1513215145.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:25.644Z,1513215145.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:26.050Z,1513215146.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:26.503Z,1513215146.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:26.913Z,1513215146.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:27.293Z,1513215147.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:27.703Z,1513215147.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:28.114Z,1513215148.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:28.459Z,1513215148.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:28.840Z,1513215148.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:29.258Z,1513215149.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:29.645Z,1513215149.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:30.051Z,1513215150.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:30.460Z,1513215150.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:30.932Z,1513215150.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:31.274Z,1513215151.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:31.674Z,1513215151.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:32.035Z,1513215152.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:32.438Z,1513215152.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:32.841Z,1513215152.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:33.275Z,1513215153.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:33.648Z,1513215153.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:34.116Z,1513215154.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:34.440Z,1513215154.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:34.850Z,1513215154.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:35.243Z,1513215155.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:35.644Z,1513215155.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:36.050Z,1513215156.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:36.491Z,1513215156.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:36.860Z,1513215156.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:37.309Z,1513215157.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:37.643Z,1513215157.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:38.043Z,1513215158.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:38.440Z,1513215158.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:38.841Z,1513215158.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:39.286Z,1513215159.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:39.667Z,1513215159.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:40.070Z,1513215160.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:40.498Z,1513215160.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:40.842Z,1513215160.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:41.243Z,1513215161.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:41.651Z,1513215161.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:42.047Z,1513215162.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:42.456Z,1513215162.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:42.912Z,1513215162.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:43.263Z,1513215163.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:43.650Z,1513215163.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:44.049Z,1513215164.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:44.451Z,1513215164.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:44.945Z,1513215164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:45.262Z,1513215165.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:45.660Z,1513215165.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:46.069Z,1513215166.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:46.460Z,1513215166.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:46.992Z,1513215166.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:47.247Z,1513215167.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:47.651Z,1513215167.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:48.045Z,1513215168.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:48.501Z,1513215168.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:48.991Z,1513215168.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:49.256Z,1513215169.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:49.675Z,1513215169.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:50.047Z,1513215170.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:50.483Z,1513215170.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:50.842Z,1513215170.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:51.314Z,1513215171.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:51.660Z,1513215171.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:52.063Z,1513215172.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:52.440Z,1513215172.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:52.844Z,1513215172.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:53.396Z,1513215173.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:53.644Z,1513215173.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:54.053Z,1513215174.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:54.465Z,1513215174.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:54.924Z,1513215174.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:58.251Z,1513215178.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:58.376Z,1513215178.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:58.795Z,1513215178.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:59.180Z,1513215179.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:59.580Z,1513215179.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:32:59.952Z,1513215179.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:00.352Z,1513215180.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:00.753Z,1513215180.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:01.182Z,1513215181.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:01.559Z,1513215181.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:01.952Z,1513215181.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:02.350Z,1513215182.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:02.759Z,1513215182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:03.153Z,1513215183.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:03.582Z,1513215183.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:03.973Z,1513215183.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:04.350Z,1513215184.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:04.761Z,1513215184.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:05.167Z,1513215185.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:05.563Z,1513215185.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:05.972Z,1513215185.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:06.375Z,1513215186.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:06.783Z,1513215186.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:07.176Z,1513215187.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:07.554Z,1513215187.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:07.957Z,1513215187.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:08.359Z,1513215188.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:08.756Z,1513215188.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:09.180Z,1513215189.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:09.602Z,1513215189.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:09.964Z,1513215189.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:10.363Z,1513215190.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:10.759Z,1513215190.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:11.204Z,1513215191.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:11.559Z,1513215191.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:11.959Z,1513215191.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:12.438Z,1513215192.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:12.771Z,1513215192.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:13.187Z,1513215193.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:13.607Z,1513215193.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:13.952Z,1513215193.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:14.351Z,1513215194.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:14.752Z,1513215194.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:15.167Z,1513215195.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:15.615Z,1513215195.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:16.006Z,1513215196.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:16.355Z,1513215196.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:16.751Z,1513215196.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:17.151Z,1513215197.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:17.556Z,1513215197.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:17.957Z,1513215197.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:18.371Z,1513215198.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:18.796Z,1513215198.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:19.168Z,1513215199.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:19.567Z,1513215199.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:19.943Z,1513215199.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:20.346Z,1513215200.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:20.767Z,1513215200.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:21.170Z,1513215201.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:21.607Z,1513215201.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:21.999Z,1513215201.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:22.351Z,1513215202.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:22.756Z,1513215202.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:23.152Z,1513215203.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:23.559Z,1513215203.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:23.952Z,1513215203.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:24.361Z,1513215204.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:24.756Z,1513215204.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:25.211Z,1513215205.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:25.563Z,1513215205.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:25.955Z,1513215205.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:26.355Z,1513215206.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:26.755Z,1513215206.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:27.167Z,1513215207.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:27.561Z,1513215207.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:27.967Z,1513215207.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:28.407Z,1513215208.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:28.752Z,1513215208.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:29.153Z,1513215209.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:29.563Z,1513215209.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:29.963Z,1513215209.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:30.372Z,1513215210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:30.770Z,1513215210.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:31.168Z,1513215211.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:31.580Z,1513215211.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:31.963Z,1513215211.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:32.365Z,1513215212.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:32.760Z,1513215212.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:33.175Z,1513215213.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:33.630Z,1513215213.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:33.981Z,1513215213.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:34.383Z,1513215214.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:34.826Z,1513215214.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:35.244Z,1513215215.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:35.553Z,1513215215.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:35.947Z,1513215215.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:36.386Z,1513215216.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:36.764Z,1513215216.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:37.163Z,1513215217.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:37.553Z,1513215217.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:38.015Z,1513215218.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:38.352Z,1513215218.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:38.755Z,1513215218.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:39.163Z,1513215219.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:39.575Z,1513215219.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:39.972Z,1513215219.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:40.363Z,1513215220.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:40.762Z,1513215220.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:41.211Z,1513215221.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:41.575Z,1513215221.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:41.967Z,1513215221.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:42.371Z,1513215222.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:42.768Z,1513215222.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:43.164Z,1513215223.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:43.572Z,1513215223.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:43.965Z,1513215223.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:44.392Z,1513215224.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:44.751Z,1513215224.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:45.177Z,1513215225.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:45.570Z,1513215225.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:45.972Z,1513215225.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:46.348Z,1513215226.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:46.751Z,1513215226.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:47.150Z,1513215227.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:47.576Z,1513215227.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:47.958Z,1513215227.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:48.399Z,1513215228.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:48.815Z,1513215228.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:49.168Z,1513215229.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:49.584Z,1513215229.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:49.954Z,1513215229.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:50.383Z,1513215230.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:50.754Z,1513215230.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:51.163Z,1513215231.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:51.591Z,1513215231.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:51.956Z,1513215231.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:52.351Z,1513215232.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:52.753Z,1513215232.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:53.151Z,1513215233.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:53.560Z,1513215233.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:53.955Z,1513215233.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:54.360Z,1513215234.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:54.767Z,1513215234.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:55.168Z,1513215235.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:58.656Z,1513215238.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:58.800Z,1513215238.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:59.160Z,1513215239.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:59.561Z,1513215239.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:33:59.928Z,1513215239.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:00.326Z,1513215240.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:00.728Z,1513215240.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:01.257Z,1513215241.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:01.546Z,1513215241.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:01.947Z,1513215241.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:02.351Z,1513215242.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:02.737Z,1513215242.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:03.143Z,1513215243.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:03.552Z,1513215243.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:03.948Z,1513215243.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:04.351Z,1513215244.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:04.734Z,1513215244.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:05.143Z,1513215245.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:05.547Z,1513215245.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:05.939Z,1513215245.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:06.335Z,1513215246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:06.731Z,1513215246.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:07.135Z,1513215247.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:07.584Z,1513215247.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:07.951Z,1513215247.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:08.334Z,1513215248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:08.726Z,1513215248.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:09.144Z,1513215249.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:09.579Z,1513215249.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:09.943Z,1513215249.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:10.338Z,1513215250.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:10.799Z,1513215250.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:11.137Z,1513215251.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:11.537Z,1513215251.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:11.979Z,1513215251.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:12.336Z,1513215252.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:12.855Z,1513215252.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:13.142Z,1513215253.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:13.549Z,1513215253.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:13.937Z,1513215253.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:14.328Z,1513215254.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:14.734Z,1513215254.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:15.143Z,1513215255.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:15.551Z,1513215255.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:15.947Z,1513215255.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:16.320Z,1513215256.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:16.725Z,1513215256.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:17.255Z,1513215257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:17.547Z,1513215257.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:17.941Z,1513215257.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:18.325Z,1513215258.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:18.884Z,1513215258.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:19.131Z,1513215259.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:19.532Z,1513215259.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:19.957Z,1513215259.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:20.328Z,1513215260.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:20.731Z,1513215260.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:21.171Z,1513215261.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:21.535Z,1513215261.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:21.940Z,1513215261.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:22.378Z,1513215262.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:22.743Z,1513215262.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:23.142Z,1513215263.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:23.626Z,1513215263.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:23.951Z,1513215263.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:24.382Z,1513215264.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:24.730Z,1513215264.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:25.140Z,1513215265.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:25.550Z,1513215265.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:25.943Z,1513215265.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:26.319Z,1513215266.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:26.719Z,1513215266.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:27.146Z,1513215267.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:27.554Z,1513215267.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:27.951Z,1513215267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:28.348Z,1513215268.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:28.723Z,1513215268.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:29.146Z,1513215269.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:29.532Z,1513215269.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:29.940Z,1513215269.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:30.331Z,1513215270.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:30.735Z,1513215270.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:31.133Z,1513215271.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:31.540Z,1513215271.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:31.942Z,1513215271.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:32.359Z,1513215272.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:32.762Z,1513215272.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:33.210Z,1513215273.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:33.540Z,1513215273.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:33.982Z,1513215273.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:34.335Z,1513215274.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:34.763Z,1513215274.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:35.139Z,1513215275.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:35.541Z,1513215275.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:35.948Z,1513215275.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:36.348Z,1513215276.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:36.717Z,1513215276.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:37.151Z,1513215277.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:37.551Z,1513215277.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:37.951Z,1513215277.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:38.347Z,1513215278.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:38.748Z,1513215278.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:39.145Z,1513215279.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:39.551Z,1513215279.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:39.950Z,1513215279.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:40.402Z,1513215280.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:40.755Z,1513215280.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:41.147Z,1513215281.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:41.551Z,1513215281.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:41.943Z,1513215281.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:42.346Z,1513215282.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:42.721Z,1513215282.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:43.244Z,1513215283.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:43.583Z,1513215283.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:43.960Z,1513215283.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:44.333Z,1513215284.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:44.732Z,1513215284.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:45.144Z,1513215285.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:45.563Z,1513215285.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:45.943Z,1513215285.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:46.335Z,1513215286.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:46.775Z,1513215286.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:47.086Z,1513215287.086 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:34:47.087Z,1513215287.087 [NAL9602] Data Fault, FailCount= 1
2017-12-14T01:34:47.087Z,1513215287.087 [NAL9602](ERROR): Data Fault
2017-12-14T01:34:47.144Z,1513215287.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:47.171Z,1513215287.171 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:34:47.492Z,1513215287.492 [NAL9602](INFO): Powering down
2017-12-14T01:34:47.541Z,1513215287.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:47.920Z,1513215287.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:48.352Z,1513215288.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:48.366Z,1513215288.366 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:34:48.366Z,1513215288.366 [NAL9602] No Fault, FailCount= 1
2017-12-14T01:34:48.718Z,1513215288.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:49.122Z,1513215289.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:49.531Z,1513215289.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:49.923Z,1513215289.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:50.339Z,1513215290.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:50.735Z,1513215290.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:51.139Z,1513215291.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:51.529Z,1513215291.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:51.951Z,1513215291.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:52.339Z,1513215292.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:52.731Z,1513215292.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:53.191Z,1513215293.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:53.538Z,1513215293.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:53.967Z,1513215293.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:54.341Z,1513215294.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:54.719Z,1513215294.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:55.120Z,1513215295.120 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:34:55.120Z,1513215295.120 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:34:55.120Z,1513215295.120 [BPC1](ERROR): Data Fault
2017-12-14T01:34:55.153Z,1513215295.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:55.175Z,1513215295.175 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:34:55.527Z,1513215295.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:59.018Z,1513215299.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:59.158Z,1513215299.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:59.172Z,1513215299.172 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:34:59.172Z,1513215299.172 [BPC1] No Fault, FailCount= 1
2017-12-14T01:34:59.592Z,1513215299.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:34:59.919Z,1513215299.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:00.321Z,1513215300.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:00.721Z,1513215300.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:01.100Z,1513215301.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:01.514Z,1513215301.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:01.928Z,1513215301.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:02.298Z,1513215302.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:02.733Z,1513215302.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:03.131Z,1513215303.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:03.506Z,1513215303.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:03.904Z,1513215303.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:04.300Z,1513215304.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:04.702Z,1513215304.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:05.131Z,1513215305.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:05.515Z,1513215305.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:05.902Z,1513215305.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:06.310Z,1513215306.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:06.778Z,1513215306.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:07.115Z,1513215307.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:07.511Z,1513215307.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:07.938Z,1513215307.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:08.310Z,1513215308.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:08.711Z,1513215308.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:09.115Z,1513215309.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:09.509Z,1513215309.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:09.915Z,1513215309.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:10.315Z,1513215310.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:10.705Z,1513215310.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:11.111Z,1513215311.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:11.515Z,1513215311.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:11.902Z,1513215311.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:12.310Z,1513215312.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:12.713Z,1513215312.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:13.266Z,1513215313.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:13.523Z,1513215313.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:13.930Z,1513215313.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:14.302Z,1513215314.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:14.721Z,1513215314.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:15.132Z,1513215315.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:15.505Z,1513215315.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:15.907Z,1513215315.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:16.315Z,1513215316.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:16.720Z,1513215316.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:16.720Z,1513215316.720 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2017-12-14T01:35:16.720Z,1513215316.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:35:16.722Z,1513215316.722 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:16.722Z,1513215316.722 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2017-12-14T01:35:16.722Z,1513215316.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:35:16.724Z,1513215316.724 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:16.724Z,1513215316.724 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2017-12-14T01:35:16.724Z,1513215316.724 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:35:16.770Z,1513215316.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:35:16.770Z,1513215316.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:35:16.770Z,1513215316.770 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:35:17.121Z,1513215317.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:35:17.121Z,1513215317.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2017-12-14T01:35:17.122Z,1513215317.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:35:17.122Z,1513215317.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2017-12-14T01:35:17.122Z,1513215317.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:35:17.122Z,1513215317.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2017-12-14T01:35:17.522Z,1513215317.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:35:17.522Z,1513215317.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:35:17.522Z,1513215317.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:35:17.523Z,1513215317.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:35:17.523Z,1513215317.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:35:17.523Z,1513215317.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:35:17.524Z,1513215317.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:35:17.524Z,1513215317.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:35:17.524Z,1513215317.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:35:17.879Z,1513215317.879 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:35:17.981Z,1513215317.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:18.316Z,1513215318.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:18.731Z,1513215318.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:19.112Z,1513215319.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:19.565Z,1513215319.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:19.944Z,1513215319.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:20.300Z,1513215320.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:20.724Z,1513215320.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:21.131Z,1513215321.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:21.509Z,1513215321.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:21.951Z,1513215321.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:22.315Z,1513215322.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:22.747Z,1513215322.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:23.112Z,1513215323.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:23.512Z,1513215323.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:23.918Z,1513215323.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:24.315Z,1513215324.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:24.724Z,1513215324.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:25.116Z,1513215325.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:25.515Z,1513215325.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:25.918Z,1513215325.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:26.314Z,1513215326.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:26.707Z,1513215326.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:27.117Z,1513215327.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:27.523Z,1513215327.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:27.906Z,1513215327.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:28.321Z,1513215328.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:28.722Z,1513215328.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:29.075Z,1513215329.075 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:35:29.167Z,1513215329.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:29.515Z,1513215329.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:29.939Z,1513215329.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:30.354Z,1513215330.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:30.739Z,1513215330.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:31.115Z,1513215331.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:31.508Z,1513215331.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:31.910Z,1513215331.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:32.367Z,1513215332.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:32.716Z,1513215332.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:33.139Z,1513215333.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:33.515Z,1513215333.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:33.897Z,1513215333.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:34.339Z,1513215334.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:34.715Z,1513215334.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:35.115Z,1513215335.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:35.559Z,1513215335.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:35.931Z,1513215335.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:36.331Z,1513215336.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:36.714Z,1513215336.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:37.110Z,1513215337.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:37.536Z,1513215337.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:37.920Z,1513215337.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:38.326Z,1513215338.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:38.740Z,1513215338.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:39.121Z,1513215339.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:39.512Z,1513215339.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:39.919Z,1513215339.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:40.312Z,1513215340.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:40.720Z,1513215340.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:41.143Z,1513215341.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:41.531Z,1513215341.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:41.971Z,1513215341.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:42.331Z,1513215342.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:42.752Z,1513215342.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:43.120Z,1513215343.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:43.547Z,1513215343.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:43.935Z,1513215343.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:44.355Z,1513215344.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:44.741Z,1513215344.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:45.160Z,1513215345.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:45.515Z,1513215345.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:45.916Z,1513215345.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:46.313Z,1513215346.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:46.714Z,1513215346.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:47.111Z,1513215347.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:47.516Z,1513215347.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:47.919Z,1513215347.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:48.371Z,1513215348.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:48.709Z,1513215348.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:49.115Z,1513215349.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:49.515Z,1513215349.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:49.915Z,1513215349.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:50.316Z,1513215350.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:50.715Z,1513215350.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:51.124Z,1513215351.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:51.572Z,1513215351.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:51.908Z,1513215351.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:52.315Z,1513215352.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:52.740Z,1513215352.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:53.119Z,1513215353.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:53.524Z,1513215353.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:53.931Z,1513215353.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:54.331Z,1513215354.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:54.773Z,1513215354.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:54.776Z,1513215354.776 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:35:54.781Z,1513215354.781 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:35:54.781Z,1513215354.781 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:35:54.781Z,1513215354.781 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:35:55.124Z,1513215355.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:55.127Z,1513215355.127 [Default:CheckIn:D] Stopped
2017-12-14T01:35:55.127Z,1513215355.127 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:35:55.521Z,1513215355.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.662284 min 
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn:E] Stopped
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn] Stopped
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:35:55.526Z,1513215355.526 [Default:CheckIn](INFO): Running loop #7
2017-12-14T01:35:55.527Z,1513215355.527 [Default:CheckIn] Running Loop=7
2017-12-14T01:35:55.527Z,1513215355.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:35:55.527Z,1513215355.527 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:35:55.920Z,1513215355.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:59.510Z,1513215359.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:35:59.651Z,1513215359.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:00.007Z,1513215360.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:00.409Z,1513215360.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:00.782Z,1513215360.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:01.207Z,1513215361.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:01.591Z,1513215361.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:01.992Z,1513215361.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:02.416Z,1513215362.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:02.810Z,1513215362.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:03.202Z,1513215363.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:03.616Z,1513215363.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:03.991Z,1513215363.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:04.401Z,1513215364.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:04.795Z,1513215364.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:05.212Z,1513215365.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:05.602Z,1513215365.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:06.015Z,1513215366.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:06.415Z,1513215366.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:06.780Z,1513215366.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:07.260Z,1513215367.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:07.623Z,1513215367.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:07.985Z,1513215367.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:08.404Z,1513215368.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:08.797Z,1513215368.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:09.267Z,1513215369.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:09.604Z,1513215369.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:09.991Z,1513215369.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:10.392Z,1513215370.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:10.886Z,1513215370.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:11.203Z,1513215371.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:11.606Z,1513215371.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:12.003Z,1513215372.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:12.375Z,1513215372.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:12.776Z,1513215372.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:13.180Z,1513215373.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:13.582Z,1513215373.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:13.980Z,1513215373.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:14.415Z,1513215374.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:14.820Z,1513215374.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:15.191Z,1513215375.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:15.618Z,1513215375.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:15.984Z,1513215375.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:16.391Z,1513215376.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:16.788Z,1513215376.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:17.203Z,1513215377.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:17.635Z,1513215377.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:17.993Z,1513215377.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:18.391Z,1513215378.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:18.790Z,1513215378.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:19.195Z,1513215379.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:19.635Z,1513215379.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:20.003Z,1513215380.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:20.401Z,1513215380.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:20.925Z,1513215380.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:21.266Z,1513215381.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:21.636Z,1513215381.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:22.015Z,1513215382.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:22.409Z,1513215382.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:22.808Z,1513215382.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:23.261Z,1513215383.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:23.596Z,1513215383.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:24.045Z,1513215384.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:24.445Z,1513215384.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:24.808Z,1513215384.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:25.222Z,1513215385.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:25.646Z,1513215385.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:25.991Z,1513215385.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:26.409Z,1513215386.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:26.796Z,1513215386.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:27.222Z,1513215387.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:27.695Z,1513215387.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:28.007Z,1513215388.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:28.403Z,1513215388.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:28.828Z,1513215388.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:29.193Z,1513215389.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:29.647Z,1513215389.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:29.986Z,1513215389.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:30.395Z,1513215390.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:30.884Z,1513215390.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:31.224Z,1513215391.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:31.587Z,1513215391.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:31.991Z,1513215391.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:32.426Z,1513215392.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:32.834Z,1513215392.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:33.226Z,1513215393.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:33.627Z,1513215393.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:34.035Z,1513215394.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:34.404Z,1513215394.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:34.795Z,1513215394.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:35.271Z,1513215395.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:35.638Z,1513215395.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:35.999Z,1513215395.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:36.411Z,1513215396.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:36.816Z,1513215396.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:37.286Z,1513215397.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:37.634Z,1513215397.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:38.037Z,1513215398.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:38.406Z,1513215398.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:38.789Z,1513215398.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:39.199Z,1513215399.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:39.610Z,1513215399.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:40.007Z,1513215400.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:40.399Z,1513215400.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:40.780Z,1513215400.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:41.203Z,1513215401.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:41.603Z,1513215401.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:42.003Z,1513215402.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:42.391Z,1513215402.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:42.793Z,1513215402.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:43.192Z,1513215403.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:43.587Z,1513215403.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:43.996Z,1513215403.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:44.403Z,1513215404.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:44.807Z,1513215404.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:45.183Z,1513215405.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:45.590Z,1513215405.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:45.989Z,1513215405.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:46.391Z,1513215406.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:46.785Z,1513215406.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:47.238Z,1513215407.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:47.600Z,1513215407.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:48.000Z,1513215408.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:48.397Z,1513215408.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:48.800Z,1513215408.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:49.265Z,1513215409.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:49.660Z,1513215409.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:49.992Z,1513215409.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:50.535Z,1513215410.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:50.779Z,1513215410.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:51.270Z,1513215411.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:51.615Z,1513215411.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:51.989Z,1513215411.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:52.420Z,1513215412.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:52.783Z,1513215412.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:53.191Z,1513215413.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:53.583Z,1513215413.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:53.987Z,1513215413.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:54.393Z,1513215414.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:54.787Z,1513215414.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:55.199Z,1513215415.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:55.592Z,1513215415.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:55.988Z,1513215415.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:59.634Z,1513215419.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:36:59.782Z,1513215419.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:00.145Z,1513215420.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:00.555Z,1513215420.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:00.976Z,1513215420.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:01.319Z,1513215421.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:01.707Z,1513215421.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:02.118Z,1513215422.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:02.513Z,1513215422.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:02.951Z,1513215422.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:03.370Z,1513215423.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:03.704Z,1513215423.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:04.107Z,1513215424.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:04.515Z,1513215424.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:04.913Z,1513215424.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:05.320Z,1513215425.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:05.722Z,1513215425.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:06.115Z,1513215426.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:06.560Z,1513215426.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:06.967Z,1513215426.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:07.307Z,1513215427.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:07.710Z,1513215427.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:08.109Z,1513215428.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:08.532Z,1513215428.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:08.980Z,1513215428.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:09.335Z,1513215429.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:09.766Z,1513215429.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:10.104Z,1513215430.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:10.502Z,1513215430.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:10.990Z,1513215430.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:11.310Z,1513215431.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:11.708Z,1513215431.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:12.115Z,1513215432.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:12.580Z,1513215432.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:13.012Z,1513215433.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:13.358Z,1513215433.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:13.716Z,1513215433.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:14.138Z,1513215434.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:14.523Z,1513215434.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:15.001Z,1513215435.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:15.349Z,1513215435.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:15.707Z,1513215435.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:16.103Z,1513215436.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:16.510Z,1513215436.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:16.910Z,1513215436.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:17.332Z,1513215437.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:17.724Z,1513215437.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:18.111Z,1513215438.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:18.510Z,1513215438.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:18.899Z,1513215438.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:19.391Z,1513215439.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:19.699Z,1513215439.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:20.100Z,1513215440.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:20.522Z,1513215440.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:20.965Z,1513215440.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:21.304Z,1513215441.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:21.709Z,1513215441.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:22.115Z,1513215442.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:22.571Z,1513215442.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:22.987Z,1513215442.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:23.350Z,1513215443.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:23.707Z,1513215443.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:24.115Z,1513215444.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:24.511Z,1513215444.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:24.975Z,1513215444.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:25.338Z,1513215445.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:25.767Z,1513215445.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:26.104Z,1513215446.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:26.501Z,1513215446.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:26.989Z,1513215446.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:27.311Z,1513215447.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:27.704Z,1513215447.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:28.105Z,1513215448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:28.508Z,1513215448.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:28.989Z,1513215448.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:29.360Z,1513215449.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:29.715Z,1513215449.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:30.113Z,1513215450.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:30.515Z,1513215450.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:30.896Z,1513215450.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:31.347Z,1513215451.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:31.686Z,1513215451.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:37:31.743Z,1513215451.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:32.129Z,1513215452.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:32.482Z,1513215452.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:37:32.512Z,1513215452.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:32.912Z,1513215452.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:33.339Z,1513215453.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:33.708Z,1513215453.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:34.109Z,1513215454.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:34.583Z,1513215454.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:34.972Z,1513215454.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:35.375Z,1513215455.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:35.715Z,1513215455.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:36.123Z,1513215456.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:36.518Z,1513215456.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:36.978Z,1513215456.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:37.331Z,1513215457.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:37.726Z,1513215457.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:38.127Z,1513215458.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:38.527Z,1513215458.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:38.954Z,1513215458.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:39.323Z,1513215459.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:39.715Z,1513215459.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:40.120Z,1513215460.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:40.520Z,1513215460.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:40.976Z,1513215460.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:41.335Z,1513215461.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:41.747Z,1513215461.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:42.102Z,1513215462.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:42.504Z,1513215462.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:42.994Z,1513215462.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:43.319Z,1513215463.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:43.716Z,1513215463.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:44.115Z,1513215464.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:44.543Z,1513215464.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:44.903Z,1513215464.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:45.370Z,1513215465.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:45.704Z,1513215465.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:46.112Z,1513215466.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:46.515Z,1513215466.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:46.927Z,1513215466.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:47.319Z,1513215467.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:47.723Z,1513215467.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:48.108Z,1513215468.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:48.568Z,1513215468.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:48.974Z,1513215468.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:49.339Z,1513215469.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:49.720Z,1513215469.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:50.127Z,1513215470.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:50.524Z,1513215470.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:50.986Z,1513215470.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:51.308Z,1513215471.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:51.708Z,1513215471.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:52.104Z,1513215472.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:52.513Z,1513215472.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:52.993Z,1513215472.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:53.354Z,1513215473.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:53.708Z,1513215473.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:54.105Z,1513215474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:54.523Z,1513215474.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:54.979Z,1513215474.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:55.358Z,1513215475.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:55.768Z,1513215475.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:56.118Z,1513215476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:59.687Z,1513215479.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:37:59.798Z,1513215479.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:00.218Z,1513215480.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:00.600Z,1513215480.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:01.023Z,1513215481.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:01.377Z,1513215481.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:01.778Z,1513215481.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:02.202Z,1513215482.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:02.583Z,1513215482.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:02.980Z,1513215482.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:03.383Z,1513215483.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:03.782Z,1513215483.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:04.182Z,1513215484.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:04.583Z,1513215484.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:05.000Z,1513215485.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:05.424Z,1513215485.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:05.783Z,1513215485.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:06.179Z,1513215486.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:06.578Z,1513215486.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:06.987Z,1513215486.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:07.402Z,1513215487.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:07.786Z,1513215487.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:08.195Z,1513215488.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:08.630Z,1513215488.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:08.979Z,1513215488.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:09.416Z,1513215489.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:09.779Z,1513215489.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:10.188Z,1513215490.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:10.590Z,1513215490.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:11.030Z,1513215491.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:11.372Z,1513215491.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:11.828Z,1513215491.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:12.201Z,1513215492.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:12.577Z,1513215492.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:12.989Z,1513215492.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:13.403Z,1513215493.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:13.797Z,1513215493.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:14.187Z,1513215494.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:14.578Z,1513215494.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:15.017Z,1513215495.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:15.383Z,1513215495.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:15.782Z,1513215495.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:16.191Z,1513215496.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:16.597Z,1513215496.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:16.999Z,1513215496.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:17.384Z,1513215497.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:17.789Z,1513215497.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:17.789Z,1513215497.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2017-12-14T01:38:17.789Z,1513215497.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:38:17.791Z,1513215497.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:17.791Z,1513215497.791 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2017-12-14T01:38:17.791Z,1513215497.791 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:38:17.793Z,1513215497.793 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:17.794Z,1513215497.794 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2017-12-14T01:38:17.794Z,1513215497.794 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:38:17.818Z,1513215497.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:38:17.818Z,1513215497.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:38:17.819Z,1513215497.819 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:38:18.255Z,1513215498.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:38:18.255Z,1513215498.255 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2017-12-14T01:38:18.255Z,1513215498.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:38:18.256Z,1513215498.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2017-12-14T01:38:18.256Z,1513215498.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:38:18.256Z,1513215498.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2017-12-14T01:38:18.590Z,1513215498.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:38:18.591Z,1513215498.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:38:18.591Z,1513215498.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:38:18.592Z,1513215498.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:38:18.592Z,1513215498.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:38:18.592Z,1513215498.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:38:18.593Z,1513215498.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:38:18.593Z,1513215498.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:38:18.593Z,1513215498.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:38:18.987Z,1513215498.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:19.381Z,1513215499.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:19.795Z,1513215499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:20.203Z,1513215500.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:20.595Z,1513215500.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:20.992Z,1513215500.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:21.483Z,1513215501.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:21.782Z,1513215501.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:22.223Z,1513215502.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:22.591Z,1513215502.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:23.027Z,1513215503.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:23.388Z,1513215503.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:23.782Z,1513215503.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:24.192Z,1513215504.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:24.590Z,1513215504.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:25.020Z,1513215505.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:25.392Z,1513215505.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:25.798Z,1513215505.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:26.194Z,1513215506.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:26.587Z,1513215506.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:26.973Z,1513215506.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:27.399Z,1513215507.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:27.818Z,1513215507.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:28.200Z,1513215508.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:28.590Z,1513215508.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:28.974Z,1513215508.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:29.404Z,1513215509.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:29.779Z,1513215509.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:30.198Z,1513215510.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:30.600Z,1513215510.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:31.024Z,1513215511.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:31.472Z,1513215511.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:31.784Z,1513215511.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:32.191Z,1513215512.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:32.595Z,1513215512.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:32.991Z,1513215512.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:33.378Z,1513215513.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:33.776Z,1513215513.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:34.274Z,1513215514.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:34.593Z,1513215514.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:34.987Z,1513215514.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:35.382Z,1513215515.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:35.781Z,1513215515.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:36.194Z,1513215516.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:36.586Z,1513215516.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:36.986Z,1513215516.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:37.403Z,1513215517.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:37.775Z,1513215517.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:38.196Z,1513215518.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:38.597Z,1513215518.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:39.017Z,1513215519.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:39.396Z,1513215519.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:39.796Z,1513215519.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:40.173Z,1513215520.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:40.610Z,1513215520.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:41.007Z,1513215521.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:41.380Z,1513215521.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:41.801Z,1513215521.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:42.206Z,1513215522.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:42.575Z,1513215522.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:42.976Z,1513215522.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:43.431Z,1513215523.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:43.816Z,1513215523.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:44.219Z,1513215524.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:44.603Z,1513215524.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:45.011Z,1513215525.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:45.379Z,1513215525.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:45.783Z,1513215525.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:46.180Z,1513215526.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:46.574Z,1513215526.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:47.016Z,1513215527.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:47.412Z,1513215527.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:47.795Z,1513215527.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:48.185Z,1513215528.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:48.580Z,1513215528.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:48.980Z,1513215528.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:49.379Z,1513215529.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:49.777Z,1513215529.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:50.219Z,1513215530.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:50.605Z,1513215530.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:50.988Z,1513215530.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:51.380Z,1513215531.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:51.781Z,1513215531.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:52.183Z,1513215532.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:52.580Z,1513215532.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:53.015Z,1513215533.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:53.450Z,1513215533.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:53.799Z,1513215533.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:54.192Z,1513215534.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:54.582Z,1513215534.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:54.994Z,1513215534.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:55.390Z,1513215535.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:55.772Z,1513215535.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:56.196Z,1513215536.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:59.772Z,1513215539.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:38:59.846Z,1513215539.846 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:38:59.959Z,1513215539.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:00.331Z,1513215540.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:00.704Z,1513215540.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:01.103Z,1513215541.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:01.505Z,1513215541.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:01.916Z,1513215541.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:02.442Z,1513215542.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:02.711Z,1513215542.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:03.123Z,1513215543.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:03.515Z,1513215543.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:03.908Z,1513215543.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:04.318Z,1513215544.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:04.720Z,1513215544.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:05.118Z,1513215545.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:05.578Z,1513215545.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:05.891Z,1513215545.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:06.375Z,1513215546.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:06.718Z,1513215546.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:07.139Z,1513215547.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:07.530Z,1513215547.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:07.940Z,1513215547.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:08.329Z,1513215548.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:08.703Z,1513215548.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:09.103Z,1513215549.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:09.541Z,1513215549.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:09.903Z,1513215549.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:10.308Z,1513215550.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:10.757Z,1513215550.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:11.115Z,1513215551.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:11.507Z,1513215551.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:11.902Z,1513215551.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:12.303Z,1513215552.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:12.707Z,1513215552.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:13.107Z,1513215553.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:13.519Z,1513215553.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:13.917Z,1513215553.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:14.319Z,1513215554.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:14.708Z,1513215554.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:15.104Z,1513215555.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:15.539Z,1513215555.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:15.915Z,1513215555.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:16.320Z,1513215556.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:16.719Z,1513215556.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:17.114Z,1513215557.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:17.516Z,1513215557.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:17.907Z,1513215557.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:18.311Z,1513215558.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:18.707Z,1513215558.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:19.147Z,1513215559.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:19.516Z,1513215559.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:19.918Z,1513215559.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:20.313Z,1513215560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:20.707Z,1513215560.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:21.102Z,1513215561.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:21.504Z,1513215561.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:21.907Z,1513215561.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:22.366Z,1513215562.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:22.715Z,1513215562.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:23.115Z,1513215563.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:23.511Z,1513215563.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:23.907Z,1513215563.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:24.307Z,1513215564.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:24.710Z,1513215564.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:25.115Z,1513215565.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:25.524Z,1513215565.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:25.973Z,1513215565.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:26.316Z,1513215566.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:26.713Z,1513215566.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:27.115Z,1513215567.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:27.539Z,1513215567.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:27.936Z,1513215567.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:28.319Z,1513215568.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:28.748Z,1513215568.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:29.146Z,1513215569.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:29.496Z,1513215569.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:29.935Z,1513215569.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:30.295Z,1513215570.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:30.695Z,1513215570.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:31.099Z,1513215571.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:31.523Z,1513215571.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:31.935Z,1513215571.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:32.336Z,1513215572.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:32.704Z,1513215572.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:33.111Z,1513215573.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:33.511Z,1513215573.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:33.905Z,1513215573.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:34.312Z,1513215574.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:34.708Z,1513215574.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:35.147Z,1513215575.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:35.503Z,1513215575.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:35.905Z,1513215575.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:36.302Z,1513215576.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:36.705Z,1513215576.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:37.118Z,1513215577.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:37.525Z,1513215577.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:37.924Z,1513215577.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:38.395Z,1513215578.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:38.710Z,1513215578.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:39.105Z,1513215579.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:39.511Z,1513215579.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:39.903Z,1513215579.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:40.335Z,1513215580.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:40.704Z,1513215580.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:41.111Z,1513215581.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:41.558Z,1513215581.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:41.911Z,1513215581.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:42.300Z,1513215582.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:42.705Z,1513215582.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:43.107Z,1513215583.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:43.556Z,1513215583.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:43.912Z,1513215583.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:44.308Z,1513215584.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:44.748Z,1513215584.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:45.104Z,1513215585.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:45.506Z,1513215585.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:45.912Z,1513215585.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:46.323Z,1513215586.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:46.723Z,1513215586.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:47.113Z,1513215587.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:47.515Z,1513215587.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:47.904Z,1513215587.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:48.314Z,1513215588.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:48.711Z,1513215588.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:49.115Z,1513215589.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:49.523Z,1513215589.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:49.951Z,1513215589.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:50.351Z,1513215590.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:50.711Z,1513215590.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:51.152Z,1513215591.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:51.531Z,1513215591.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:51.908Z,1513215591.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:52.366Z,1513215592.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:52.716Z,1513215592.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:53.115Z,1513215593.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:53.509Z,1513215593.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:53.911Z,1513215593.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:54.313Z,1513215594.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:54.711Z,1513215594.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:55.115Z,1513215595.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:55.527Z,1513215595.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:55.931Z,1513215595.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:39:56.343Z,1513215596.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:00.088Z,1513215600.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:00.209Z,1513215600.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:00.634Z,1513215600.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:01.006Z,1513215601.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:01.021Z,1513215601.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:01.396Z,1513215601.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:01.422Z,1513215601.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:01.772Z,1513215601.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:01.787Z,1513215601.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:02.177Z,1513215602.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:02.192Z,1513215602.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:02.580Z,1513215602.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:02.607Z,1513215602.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:02.999Z,1513215602.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:03.022Z,1513215603.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:03.389Z,1513215603.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:03.404Z,1513215603.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:03.801Z,1513215603.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:03.832Z,1513215603.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:04.188Z,1513215604.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:04.207Z,1513215604.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:04.579Z,1513215604.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:04.594Z,1513215604.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:04.972Z,1513215604.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:05.003Z,1513215605.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:05.385Z,1513215605.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:05.400Z,1513215605.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:05.786Z,1513215605.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:05.801Z,1513215605.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:06.194Z,1513215606.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:06.210Z,1513215606.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:06.593Z,1513215606.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:06.607Z,1513215606.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:06.995Z,1513215606.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:07.022Z,1513215607.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:07.394Z,1513215607.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:07.415Z,1513215607.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:07.773Z,1513215607.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:07.807Z,1513215607.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:08.172Z,1513215608.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:08.200Z,1513215608.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:08.573Z,1513215608.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:08.599Z,1513215608.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:08.971Z,1513215608.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:09.004Z,1513215609.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:09.394Z,1513215609.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:09.414Z,1513215609.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:09.795Z,1513215609.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:09.811Z,1513215609.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:10.207Z,1513215610.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:10.248Z,1513215610.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:10.572Z,1513215610.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:10.603Z,1513215610.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:10.976Z,1513215610.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:10.995Z,1513215610.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:11.375Z,1513215611.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:11.391Z,1513215611.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:11.774Z,1513215611.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:11.795Z,1513215611.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:12.190Z,1513215612.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:12.255Z,1513215612.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:12.596Z,1513215612.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:12.682Z,1513215612.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:12.993Z,1513215612.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:13.008Z,1513215613.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:13.390Z,1513215613.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:13.431Z,1513215613.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:13.784Z,1513215613.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:13.840Z,1513215613.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:14.172Z,1513215614.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:14.207Z,1513215614.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:14.570Z,1513215614.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:14.640Z,1513215614.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:14.984Z,1513215614.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:15.003Z,1513215615.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:15.395Z,1513215615.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:15.411Z,1513215615.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:15.796Z,1513215615.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:15.813Z,1513215615.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:16.190Z,1513215616.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:16.204Z,1513215616.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:16.583Z,1513215616.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:16.630Z,1513215616.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:16.992Z,1513215616.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:17.020Z,1513215617.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:17.373Z,1513215617.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:17.410Z,1513215617.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:17.771Z,1513215617.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:17.806Z,1513215617.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:18.190Z,1513215618.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:18.204Z,1513215618.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:18.593Z,1513215618.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:18.607Z,1513215618.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:18.995Z,1513215618.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:19.009Z,1513215619.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:19.371Z,1513215619.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:19.406Z,1513215619.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:19.781Z,1513215619.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:19.820Z,1513215619.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:20.179Z,1513215620.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:20.194Z,1513215620.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:20.576Z,1513215620.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:20.595Z,1513215620.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:20.976Z,1513215620.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:20.995Z,1513215620.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:21.386Z,1513215621.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:21.401Z,1513215621.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:21.793Z,1513215621.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:21.820Z,1513215621.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:22.193Z,1513215622.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:22.227Z,1513215622.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:22.570Z,1513215622.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:22.597Z,1513215622.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:23.012Z,1513215623.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:23.078Z,1513215623.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:23.382Z,1513215623.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:23.397Z,1513215623.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:23.781Z,1513215623.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:23.795Z,1513215623.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:24.182Z,1513215624.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:24.196Z,1513215624.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:24.588Z,1513215624.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:24.603Z,1513215624.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:24.982Z,1513215624.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:24.997Z,1513215624.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:25.380Z,1513215625.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:25.399Z,1513215625.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:25.779Z,1513215625.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:25.794Z,1513215625.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:26.212Z,1513215626.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:26.250Z,1513215626.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:26.583Z,1513215626.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:26.603Z,1513215626.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:26.978Z,1513215626.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:26.993Z,1513215626.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:27.386Z,1513215627.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:27.401Z,1513215627.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:27.788Z,1513215627.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:27.808Z,1513215627.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:28.205Z,1513215628.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:28.235Z,1513215628.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:28.578Z,1513215628.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:28.592Z,1513215628.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:28.977Z,1513215628.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:28.992Z,1513215628.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:29.399Z,1513215629.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:29.434Z,1513215629.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:29.780Z,1513215629.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:29.794Z,1513215629.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:30.193Z,1513215630.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:30.216Z,1513215630.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:30.593Z,1513215630.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:30.607Z,1513215630.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:31.006Z,1513215631.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:31.020Z,1513215631.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:31.387Z,1513215631.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:31.469Z,1513215631.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:31.772Z,1513215631.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:31.800Z,1513215631.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:32.184Z,1513215632.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:32.204Z,1513215632.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:32.586Z,1513215632.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:32.618Z,1513215632.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:32.987Z,1513215632.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:33.007Z,1513215633.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:33.396Z,1513215633.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:33.411Z,1513215633.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:33.796Z,1513215633.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:33.810Z,1513215633.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:34.192Z,1513215634.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:34.211Z,1513215634.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:34.573Z,1513215634.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:34.599Z,1513215634.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:34.975Z,1513215634.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:35.028Z,1513215635.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:35.398Z,1513215635.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:35.454Z,1513215635.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:35.780Z,1513215635.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:35.805Z,1513215635.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:36.197Z,1513215636.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:36.251Z,1513215636.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:36.607Z,1513215636.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:36.627Z,1513215636.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:36.981Z,1513215636.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:37.027Z,1513215637.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:37.385Z,1513215637.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:37.403Z,1513215637.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:37.776Z,1513215637.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:37.807Z,1513215637.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:38.177Z,1513215638.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:38.191Z,1513215638.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:38.578Z,1513215638.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:38.592Z,1513215638.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:38.983Z,1513215638.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:38.997Z,1513215638.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:39.390Z,1513215639.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:39.434Z,1513215639.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:39.786Z,1513215639.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:39.800Z,1513215639.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:40.186Z,1513215640.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:40.200Z,1513215640.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:40.580Z,1513215640.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:40.594Z,1513215640.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:40.983Z,1513215640.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:40.998Z,1513215640.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:41.379Z,1513215641.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:41.406Z,1513215641.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:41.780Z,1513215641.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:41.795Z,1513215641.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:42.190Z,1513215642.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:42.212Z,1513215642.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:42.596Z,1513215642.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:42.619Z,1513215642.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:42.995Z,1513215642.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:43.010Z,1513215643.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:43.370Z,1513215643.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:43.392Z,1513215643.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:43.775Z,1513215643.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:43.807Z,1513215643.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:44.173Z,1513215644.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:44.203Z,1513215644.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:44.575Z,1513215644.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:44.600Z,1513215644.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:44.992Z,1513215644.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:45.015Z,1513215645.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:45.397Z,1513215645.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:45.451Z,1513215645.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:45.808Z,1513215645.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:45.828Z,1513215645.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:46.181Z,1513215646.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:46.209Z,1513215646.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:46.574Z,1513215646.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:46.601Z,1513215646.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:46.988Z,1513215646.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:47.009Z,1513215647.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:47.387Z,1513215647.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:47.410Z,1513215647.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:47.780Z,1513215647.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:47.811Z,1513215647.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:48.183Z,1513215648.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:48.209Z,1513215648.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:48.595Z,1513215648.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:48.614Z,1513215648.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:49.017Z,1513215649.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:49.036Z,1513215649.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:49.378Z,1513215649.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:49.393Z,1513215649.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:49.778Z,1513215649.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:49.793Z,1513215649.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:50.184Z,1513215650.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:50.199Z,1513215650.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:50.580Z,1513215650.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:50.611Z,1513215650.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:50.976Z,1513215650.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:50.991Z,1513215650.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:51.390Z,1513215651.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:51.425Z,1513215651.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:51.783Z,1513215651.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:51.802Z,1513215651.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:52.225Z,1513215652.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:52.269Z,1513215652.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:52.582Z,1513215652.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:52.597Z,1513215652.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:52.982Z,1513215652.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:53.027Z,1513215653.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:53.432Z,1513215653.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:53.455Z,1513215653.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:53.787Z,1513215653.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:53.811Z,1513215653.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:54.196Z,1513215654.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:54.215Z,1513215654.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:54.594Z,1513215654.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:54.615Z,1513215654.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:54.994Z,1513215654.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:55.015Z,1513215655.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:55.394Z,1513215655.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:55.426Z,1513215655.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:55.795Z,1513215655.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:55.811Z,1513215655.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:55.815Z,1513215655.815 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:35:55.5Z
2017-12-14T01:40:55.815Z,1513215655.815 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T01:40:55.815Z,1513215655.815 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T01:40:56.174Z,1513215656.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:56.210Z,1513215656.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:40:57.033Z,1513215657.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:40:57.058Z,1513215657.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:00.207Z,1513215660.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:00.256Z,1513215660.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:00.331Z,1513215660.331 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0028.lzma
2017-12-14T01:41:00.371Z,1513215660.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:00.410Z,1513215660.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:00.737Z,1513215660.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:00.754Z,1513215660.754 [BPC1](ERROR): Failed to receive battery data
2017-12-14T01:41:00.754Z,1513215660.754 [BPC1] Communications Fault, FailCount= 1
2017-12-14T01:41:00.754Z,1513215660.754 [BPC1](ERROR): Communications Fault
2017-12-14T01:41:00.762Z,1513215660.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:00.776Z,1513215660.776 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T01:41:01.099Z,1513215661.099 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0028.lzma.bak
2017-12-14T01:41:01.099Z,1513215661.099 [DataOverHttps](INFO): SBD MOMSN=5437342
2017-12-14T01:41:01.148Z,1513215661.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:01.164Z,1513215661.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:02.391Z,1513215662.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:02.419Z,1513215662.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:02.516Z,1513215662.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:02.559Z,1513215662.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:02.574Z,1513215662.574 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:41:02.574Z,1513215662.574 [BPC1] No Fault, FailCount= 1
2017-12-14T01:41:06.020Z,1513215666.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:06.079Z,1513215666.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:06.186Z,1513215666.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:06.218Z,1513215666.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:06.546Z,1513215666.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:06.587Z,1513215666.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:06.977Z,1513215666.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:06.997Z,1513215666.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:07.356Z,1513215667.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:07.373Z,1513215667.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:07.728Z,1513215667.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:07.764Z,1513215667.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:11.277Z,1513215671.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:11.292Z,1513215671.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:11.393Z,1513215671.393 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0029.lzma
2017-12-14T01:41:11.434Z,1513215671.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:11.473Z,1513215671.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:11.782Z,1513215671.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:11.803Z,1513215671.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:12.143Z,1513215672.143 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0029.lzma.bak
2017-12-14T01:41:12.143Z,1513215672.143 [DataOverHttps](INFO): SBD MOMSN=5437344
2017-12-14T01:41:12.187Z,1513215672.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:12.201Z,1513215672.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:13.426Z,1513215673.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:13.447Z,1513215673.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:13.450Z,1513215673.450 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T01:41:13.450Z,1513215673.450 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T01:41:13.450Z,1513215673.450 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T01:41:13.552Z,1513215673.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:13.583Z,1513215673.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:16.943Z,1513215676.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:17.000Z,1513215677.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:17.106Z,1513215677.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:17.136Z,1513215677.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:17.482Z,1513215677.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:17.516Z,1513215677.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:17.878Z,1513215677.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:17.917Z,1513215677.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:18.271Z,1513215678.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:18.308Z,1513215678.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:18.672Z,1513215678.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:18.707Z,1513215678.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:18.708Z,1513215678.708 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2017-12-14T01:41:18.708Z,1513215678.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:41:18.710Z,1513215678.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:18.710Z,1513215678.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2017-12-14T01:41:18.710Z,1513215678.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:41:18.712Z,1513215678.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:18.712Z,1513215678.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2017-12-14T01:41:18.712Z,1513215678.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:41:18.724Z,1513215678.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:41:18.724Z,1513215678.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:41:18.724Z,1513215678.724 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:41:19.076Z,1513215679.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:19.116Z,1513215679.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:41:19.116Z,1513215679.116 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2017-12-14T01:41:19.116Z,1513215679.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:41:19.116Z,1513215679.116 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2017-12-14T01:41:19.117Z,1513215679.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:41:19.117Z,1513215679.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2017-12-14T01:41:19.494Z,1513215679.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:19.513Z,1513215679.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:41:19.514Z,1513215679.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:41:19.514Z,1513215679.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:41:19.515Z,1513215679.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:41:19.515Z,1513215679.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:41:19.515Z,1513215679.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:41:19.516Z,1513215679.516 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:41:19.516Z,1513215679.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:41:19.516Z,1513215679.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:41:19.897Z,1513215679.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:19.921Z,1513215679.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:20.286Z,1513215680.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:20.301Z,1513215680.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:20.672Z,1513215680.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:20.714Z,1513215680.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:21.090Z,1513215681.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:21.142Z,1513215681.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:21.483Z,1513215681.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:21.539Z,1513215681.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:21.882Z,1513215681.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:21.897Z,1513215681.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:22.293Z,1513215682.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:22.308Z,1513215682.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:22.698Z,1513215682.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:22.727Z,1513215682.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:23.095Z,1513215683.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:23.125Z,1513215683.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:23.503Z,1513215683.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:23.530Z,1513215683.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:23.935Z,1513215683.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:23.976Z,1513215683.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:24.273Z,1513215684.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:24.288Z,1513215684.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:24.678Z,1513215684.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:24.715Z,1513215684.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:25.080Z,1513215685.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:25.095Z,1513215685.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:25.491Z,1513215685.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:25.521Z,1513215685.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:25.911Z,1513215685.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:25.925Z,1513215685.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:26.293Z,1513215686.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:26.328Z,1513215686.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:26.699Z,1513215686.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:26.723Z,1513215686.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:27.082Z,1513215687.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:27.097Z,1513215687.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:27.510Z,1513215687.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:27.619Z,1513215687.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:27.890Z,1513215687.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:27.906Z,1513215687.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:28.289Z,1513215688.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:28.304Z,1513215688.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:28.694Z,1513215688.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:28.715Z,1513215688.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:29.094Z,1513215689.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:29.144Z,1513215689.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:29.499Z,1513215689.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:29.560Z,1513215689.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:29.886Z,1513215689.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:29.923Z,1513215689.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:30.271Z,1513215690.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:30.303Z,1513215690.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:30.673Z,1513215690.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:30.699Z,1513215690.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:31.072Z,1513215691.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:31.107Z,1513215691.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:31.509Z,1513215691.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:31.547Z,1513215691.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:31.900Z,1513215691.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:31.914Z,1513215691.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:32.297Z,1513215692.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:32.311Z,1513215692.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:32.681Z,1513215692.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:32.702Z,1513215692.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:33.079Z,1513215693.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:33.095Z,1513215693.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:33.481Z,1513215693.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:33.496Z,1513215693.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:33.891Z,1513215693.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:33.930Z,1513215693.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:34.289Z,1513215694.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:34.315Z,1513215694.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:34.696Z,1513215694.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:34.711Z,1513215694.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:35.091Z,1513215695.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:35.199Z,1513215695.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:35.471Z,1513215695.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:35.496Z,1513215695.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:35.871Z,1513215695.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:35.897Z,1513215695.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:36.271Z,1513215696.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:36.298Z,1513215696.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:36.672Z,1513215696.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:36.699Z,1513215696.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:37.123Z,1513215697.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:37.176Z,1513215697.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:37.489Z,1513215697.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:37.505Z,1513215697.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:37.889Z,1513215697.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:37.903Z,1513215697.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:38.290Z,1513215698.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:38.336Z,1513215698.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:38.686Z,1513215698.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:38.703Z,1513215698.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:39.086Z,1513215699.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:39.109Z,1513215699.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:39.487Z,1513215699.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:39.502Z,1513215699.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:39.871Z,1513215699.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:39.996Z,1513215699.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:40.297Z,1513215700.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:40.312Z,1513215700.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:40.694Z,1513215700.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:40.715Z,1513215700.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:41.096Z,1513215701.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:41.119Z,1513215701.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:41.475Z,1513215701.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:41.503Z,1513215701.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:41.892Z,1513215701.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:41.947Z,1513215701.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:42.271Z,1513215702.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:42.302Z,1513215702.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:42.795Z,1513215702.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:42.898Z,1513215702.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:43.072Z,1513215703.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:43.112Z,1513215703.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:43.514Z,1513215703.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:43.580Z,1513215703.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:43.892Z,1513215703.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:43.927Z,1513215703.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:44.288Z,1513215704.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:44.326Z,1513215704.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:44.691Z,1513215704.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:44.707Z,1513215704.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:45.091Z,1513215705.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:45.138Z,1513215705.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:45.471Z,1513215705.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:45.507Z,1513215705.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:45.907Z,1513215705.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:46.015Z,1513215706.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:46.303Z,1513215706.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:46.354Z,1513215706.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:46.716Z,1513215706.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:46.760Z,1513215706.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:47.083Z,1513215707.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:47.127Z,1513215707.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:47.473Z,1513215707.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:47.513Z,1513215707.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:47.878Z,1513215707.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:47.932Z,1513215707.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:48.277Z,1513215708.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:48.313Z,1513215708.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:48.679Z,1513215708.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:48.752Z,1513215708.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:49.079Z,1513215709.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:49.123Z,1513215709.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:49.491Z,1513215709.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:49.515Z,1513215709.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:49.913Z,1513215709.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:49.947Z,1513215709.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:50.303Z,1513215710.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:50.379Z,1513215710.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:50.728Z,1513215710.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:50.751Z,1513215710.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:51.079Z,1513215711.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:51.104Z,1513215711.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:51.474Z,1513215711.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:51.531Z,1513215711.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:51.930Z,1513215711.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:51.972Z,1513215711.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:52.288Z,1513215712.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:52.366Z,1513215712.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:52.687Z,1513215712.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:52.721Z,1513215712.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:53.084Z,1513215713.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:53.131Z,1513215713.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:53.475Z,1513215713.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:53.523Z,1513215713.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:53.881Z,1513215713.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:53.938Z,1513215713.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:54.276Z,1513215714.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:54.311Z,1513215714.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:54.673Z,1513215714.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:54.715Z,1513215714.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:55.077Z,1513215715.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:55.112Z,1513215715.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:55.494Z,1513215715.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:55.517Z,1513215715.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:55.897Z,1513215715.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:55.966Z,1513215715.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:56.284Z,1513215716.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:56.318Z,1513215716.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:56.769Z,1513215716.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:56.799Z,1513215716.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:57.118Z,1513215717.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:57.167Z,1513215717.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:57.482Z,1513215717.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:57.549Z,1513215717.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:57.873Z,1513215717.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:57.948Z,1513215717.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:58.284Z,1513215718.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:58.315Z,1513215718.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:58.725Z,1513215718.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:58.768Z,1513215718.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:59.083Z,1513215719.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:59.122Z,1513215719.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:59.483Z,1513215719.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:59.511Z,1513215719.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:41:59.883Z,1513215719.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:41:59.939Z,1513215719.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:00.283Z,1513215720.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:00.306Z,1513215720.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:00.683Z,1513215720.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:00.724Z,1513215720.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:01.091Z,1513215721.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:01.111Z,1513215721.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:01.491Z,1513215721.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:01.511Z,1513215721.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:01.898Z,1513215721.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:01.912Z,1513215721.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:02.294Z,1513215722.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:02.309Z,1513215722.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:02.671Z,1513215722.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:02.703Z,1513215722.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:03.071Z,1513215723.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:03.101Z,1513215723.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:03.472Z,1513215723.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:03.502Z,1513215723.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:03.872Z,1513215723.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:03.910Z,1513215723.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:04.295Z,1513215724.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:04.309Z,1513215724.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:04.698Z,1513215724.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:04.713Z,1513215724.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:05.101Z,1513215725.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:05.116Z,1513215725.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:05.471Z,1513215725.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:05.503Z,1513215725.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:05.875Z,1513215725.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:05.900Z,1513215725.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:06.271Z,1513215726.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:06.297Z,1513215726.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:06.670Z,1513215726.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:06.697Z,1513215726.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:07.078Z,1513215727.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:07.135Z,1513215727.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:07.498Z,1513215727.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:07.513Z,1513215727.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:07.898Z,1513215727.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:07.913Z,1513215727.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:08.294Z,1513215728.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:08.309Z,1513215728.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:08.686Z,1513215728.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:08.701Z,1513215728.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:09.071Z,1513215729.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:09.100Z,1513215729.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:09.489Z,1513215729.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:09.504Z,1513215729.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:09.873Z,1513215729.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:09.944Z,1513215729.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:10.358Z,1513215730.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:10.446Z,1513215730.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:10.689Z,1513215730.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:10.705Z,1513215730.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:11.101Z,1513215731.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:11.134Z,1513215731.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:11.492Z,1513215731.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:11.598Z,1513215731.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:11.895Z,1513215731.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:11.946Z,1513215731.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:12.274Z,1513215732.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:12.335Z,1513215732.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:12.669Z,1513215732.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:12.695Z,1513215732.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:13.084Z,1513215733.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:13.103Z,1513215733.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:13.498Z,1513215733.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:13.547Z,1513215733.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:13.896Z,1513215733.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:13.919Z,1513215733.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:17.445Z,1513215737.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:17.502Z,1513215737.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:17.599Z,1513215737.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:17.638Z,1513215737.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:17.998Z,1513215737.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:18.012Z,1513215738.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:18.365Z,1513215738.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:18.396Z,1513215738.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:18.755Z,1513215738.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:18.769Z,1513215738.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:19.178Z,1513215739.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:19.211Z,1513215739.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:19.578Z,1513215739.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:19.611Z,1513215739.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:19.970Z,1513215739.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:20.003Z,1513215740.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:20.369Z,1513215740.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:20.385Z,1513215740.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:20.764Z,1513215740.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:20.778Z,1513215740.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:21.161Z,1513215741.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:21.183Z,1513215741.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:21.564Z,1513215741.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:21.579Z,1513215741.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:21.959Z,1513215741.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:21.987Z,1513215741.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:22.374Z,1513215742.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:22.388Z,1513215742.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:22.774Z,1513215742.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:22.795Z,1513215742.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:23.200Z,1513215743.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:23.228Z,1513215743.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:23.574Z,1513215743.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:23.588Z,1513215743.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:23.970Z,1513215743.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:23.991Z,1513215743.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:24.368Z,1513215744.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:24.387Z,1513215744.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:24.812Z,1513215744.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:24.851Z,1513215744.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:25.179Z,1513215745.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:25.274Z,1513215745.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:25.582Z,1513215745.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:25.631Z,1513215745.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:25.969Z,1513215745.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:25.995Z,1513215745.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:26.354Z,1513215746.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:26.446Z,1513215746.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:26.763Z,1513215746.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:26.794Z,1513215746.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:27.165Z,1513215747.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:27.217Z,1513215747.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:27.568Z,1513215747.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:27.583Z,1513215747.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:27.970Z,1513215747.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:27.985Z,1513215747.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:28.362Z,1513215748.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:28.383Z,1513215748.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:28.757Z,1513215748.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:28.772Z,1513215748.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:29.162Z,1513215749.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:29.182Z,1513215749.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:29.554Z,1513215749.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:29.616Z,1513215749.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:29.968Z,1513215749.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:29.994Z,1513215749.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:30.378Z,1513215750.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:30.399Z,1513215750.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:30.778Z,1513215750.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:30.792Z,1513215750.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:31.169Z,1513215751.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:31.204Z,1513215751.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:31.565Z,1513215751.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:31.596Z,1513215751.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:31.959Z,1513215751.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:31.974Z,1513215751.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:32.354Z,1513215752.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:32.369Z,1513215752.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:32.805Z,1513215752.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:32.884Z,1513215752.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:33.171Z,1513215753.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:33.186Z,1513215753.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:33.576Z,1513215753.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:33.592Z,1513215753.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:33.973Z,1513215753.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:33.996Z,1513215753.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:34.356Z,1513215754.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:34.388Z,1513215754.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:34.752Z,1513215754.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:34.788Z,1513215754.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:35.170Z,1513215755.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:35.195Z,1513215755.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:35.568Z,1513215755.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:35.590Z,1513215755.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:35.969Z,1513215755.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:36.019Z,1513215756.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:36.360Z,1513215756.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:36.375Z,1513215756.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:36.760Z,1513215756.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:36.776Z,1513215756.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:37.249Z,1513215757.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:37.264Z,1513215757.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:37.556Z,1513215757.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:37.576Z,1513215757.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:37.961Z,1513215757.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:38.022Z,1513215758.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:38.375Z,1513215758.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:38.390Z,1513215758.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:38.778Z,1513215758.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:38.826Z,1513215758.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:39.168Z,1513215759.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:39.275Z,1513215759.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:39.551Z,1513215759.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:39.603Z,1513215759.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:39.955Z,1513215759.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:39.982Z,1513215759.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:40.356Z,1513215760.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:40.382Z,1513215760.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:40.750Z,1513215760.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:40.795Z,1513215760.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:41.177Z,1513215761.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:41.251Z,1513215761.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:41.578Z,1513215761.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:41.599Z,1513215761.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:41.974Z,1513215761.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:41.988Z,1513215761.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:42.352Z,1513215762.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:42.379Z,1513215762.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:42.752Z,1513215762.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:42.786Z,1513215762.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:43.177Z,1513215763.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:43.191Z,1513215763.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:43.571Z,1513215763.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:43.591Z,1513215763.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:43.971Z,1513215763.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:44.002Z,1513215764.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:44.349Z,1513215764.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:44.364Z,1513215764.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:44.755Z,1513215764.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:44.787Z,1513215764.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:45.162Z,1513215765.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:45.195Z,1513215765.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:45.594Z,1513215765.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:45.658Z,1513215765.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:45.986Z,1513215765.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:46.001Z,1513215766.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:46.351Z,1513215766.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:46.392Z,1513215766.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:46.755Z,1513215766.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:46.770Z,1513215766.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:47.159Z,1513215767.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:47.194Z,1513215767.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:47.557Z,1513215767.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:47.571Z,1513215767.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:47.958Z,1513215767.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:48.008Z,1513215768.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:48.370Z,1513215768.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:48.395Z,1513215768.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:48.845Z,1513215768.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:48.940Z,1513215768.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:49.173Z,1513215769.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:49.204Z,1513215769.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:49.558Z,1513215769.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:49.595Z,1513215769.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:49.957Z,1513215769.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:49.972Z,1513215769.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:50.360Z,1513215770.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:50.374Z,1513215770.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:50.764Z,1513215770.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:50.780Z,1513215770.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:51.166Z,1513215771.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:51.181Z,1513215771.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:51.574Z,1513215771.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:51.608Z,1513215771.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:51.966Z,1513215771.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:51.980Z,1513215771.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:52.364Z,1513215772.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:52.379Z,1513215772.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:52.762Z,1513215772.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:52.783Z,1513215772.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:53.166Z,1513215773.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:53.239Z,1513215773.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:53.571Z,1513215773.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:53.586Z,1513215773.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:53.973Z,1513215773.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:53.987Z,1513215773.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:54.374Z,1513215774.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:54.389Z,1513215774.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:54.780Z,1513215774.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:54.815Z,1513215774.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:55.236Z,1513215775.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:55.288Z,1513215775.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:55.553Z,1513215775.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:55.589Z,1513215775.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:55.952Z,1513215775.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:55.993Z,1513215775.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:56.365Z,1513215776.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:56.401Z,1513215776.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:56.766Z,1513215776.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:56.795Z,1513215776.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:57.192Z,1513215777.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:57.210Z,1513215777.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:57.564Z,1513215777.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:57.579Z,1513215777.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:57.959Z,1513215777.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:57.975Z,1513215777.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:58.357Z,1513215778.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:58.408Z,1513215778.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:58.762Z,1513215778.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:58.783Z,1513215778.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:59.170Z,1513215779.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:59.186Z,1513215779.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:59.570Z,1513215779.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:42:59.586Z,1513215779.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:42:59.971Z,1513215779.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:00.043Z,1513215780.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:00.364Z,1513215780.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:00.379Z,1513215780.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:00.751Z,1513215780.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:00.811Z,1513215780.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:01.151Z,1513215781.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:01.190Z,1513215781.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:01.574Z,1513215781.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:01.627Z,1513215781.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:01.978Z,1513215781.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:01.993Z,1513215781.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:02.382Z,1513215782.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:02.396Z,1513215782.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:02.766Z,1513215782.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:02.792Z,1513215782.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:03.162Z,1513215783.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:03.188Z,1513215783.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:03.552Z,1513215783.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:03.567Z,1513215783.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:03.952Z,1513215783.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:03.989Z,1513215783.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:04.360Z,1513215784.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:04.376Z,1513215784.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:04.760Z,1513215784.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:04.856Z,1513215784.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:05.162Z,1513215785.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:05.178Z,1513215785.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:05.573Z,1513215785.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:05.609Z,1513215785.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:05.966Z,1513215785.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:05.980Z,1513215785.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:06.361Z,1513215786.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:06.376Z,1513215786.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:06.758Z,1513215786.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:06.773Z,1513215786.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:07.165Z,1513215787.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:07.307Z,1513215787.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:07.574Z,1513215787.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:07.589Z,1513215787.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:07.974Z,1513215787.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:07.989Z,1513215787.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:08.362Z,1513215788.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:08.383Z,1513215788.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:08.764Z,1513215788.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:08.784Z,1513215788.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:09.192Z,1513215789.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:09.267Z,1513215789.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:09.574Z,1513215789.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:09.588Z,1513215789.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:09.974Z,1513215789.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:10.026Z,1513215790.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:10.360Z,1513215790.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:10.379Z,1513215790.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:10.759Z,1513215790.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:10.783Z,1513215790.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:11.172Z,1513215791.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:11.188Z,1513215791.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:11.552Z,1513215791.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:11.587Z,1513215791.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:11.959Z,1513215791.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:11.985Z,1513215791.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:12.375Z,1513215792.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:12.407Z,1513215792.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:12.774Z,1513215792.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:12.795Z,1513215792.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:13.174Z,1513215793.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:13.207Z,1513215793.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:13.557Z,1513215793.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:13.602Z,1513215793.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:13.965Z,1513215793.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:13.988Z,1513215793.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:17.754Z,1513215797.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:17.817Z,1513215797.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:17.910Z,1513215797.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:17.951Z,1513215797.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:18.305Z,1513215798.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:18.320Z,1513215798.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:18.711Z,1513215798.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:18.749Z,1513215798.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:19.100Z,1513215799.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:19.123Z,1513215799.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:19.500Z,1513215799.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:19.523Z,1513215799.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:19.902Z,1513215799.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:19.922Z,1513215799.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:20.302Z,1513215800.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:20.317Z,1513215800.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:20.696Z,1513215800.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:20.769Z,1513215800.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:21.087Z,1513215801.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:21.147Z,1513215801.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:21.506Z,1513215801.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:21.532Z,1513215801.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:21.905Z,1513215801.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:21.935Z,1513215801.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:22.316Z,1513215802.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:22.379Z,1513215802.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:22.695Z,1513215802.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:22.729Z,1513215802.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:23.094Z,1513215803.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:23.139Z,1513215803.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:23.490Z,1513215803.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:23.523Z,1513215803.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:23.943Z,1513215803.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:23.967Z,1513215803.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:24.317Z,1513215804.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:24.353Z,1513215804.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:24.706Z,1513215804.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:24.727Z,1513215804.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:25.107Z,1513215805.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:25.121Z,1513215805.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:25.491Z,1513215805.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:25.523Z,1513215805.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:25.902Z,1513215805.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:25.919Z,1513215805.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:26.297Z,1513215806.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:26.319Z,1513215806.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:26.698Z,1513215806.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:26.712Z,1513215806.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:27.146Z,1513215807.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:27.174Z,1513215807.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:27.515Z,1513215807.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:27.530Z,1513215807.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:27.910Z,1513215807.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:27.925Z,1513215807.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:28.315Z,1513215808.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:28.330Z,1513215808.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:28.699Z,1513215808.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:28.716Z,1513215808.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:29.087Z,1513215809.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:29.119Z,1513215809.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:29.488Z,1513215809.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:29.523Z,1513215809.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:29.891Z,1513215809.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:29.917Z,1513215809.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:30.330Z,1513215810.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:30.367Z,1513215810.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:30.706Z,1513215810.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:30.736Z,1513215810.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:31.098Z,1513215811.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:31.124Z,1513215811.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:31.494Z,1513215811.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:31.541Z,1513215811.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:31.896Z,1513215811.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:31.911Z,1513215811.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:32.296Z,1513215812.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:32.337Z,1513215812.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:32.698Z,1513215812.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:32.712Z,1513215812.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:33.096Z,1513215813.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:33.113Z,1513215813.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:33.542Z,1513215813.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:33.563Z,1513215813.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:33.901Z,1513215813.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:33.923Z,1513215813.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:34.306Z,1513215814.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:34.322Z,1513215814.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:34.700Z,1513215814.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:34.716Z,1513215814.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:35.097Z,1513215815.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:35.111Z,1513215815.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:35.496Z,1513215815.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:35.516Z,1513215815.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:35.899Z,1513215815.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:35.914Z,1513215815.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:36.306Z,1513215816.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:36.349Z,1513215816.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:36.724Z,1513215816.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:36.768Z,1513215816.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:37.110Z,1513215817.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:37.124Z,1513215817.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:37.487Z,1513215817.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:37.534Z,1513215817.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:37.895Z,1513215817.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:37.933Z,1513215817.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:38.295Z,1513215818.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:38.330Z,1513215818.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:38.693Z,1513215818.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:38.708Z,1513215818.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:39.096Z,1513215819.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:39.130Z,1513215819.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:39.505Z,1513215819.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:39.535Z,1513215819.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:39.927Z,1513215819.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:39.952Z,1513215819.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:40.302Z,1513215820.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:40.330Z,1513215820.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:40.689Z,1513215820.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:40.703Z,1513215820.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:41.092Z,1513215821.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:41.132Z,1513215821.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:41.494Z,1513215821.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:41.509Z,1513215821.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:41.892Z,1513215821.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:41.908Z,1513215821.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:42.306Z,1513215822.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:42.360Z,1513215822.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:42.706Z,1513215822.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:42.733Z,1513215822.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:43.112Z,1513215823.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:43.143Z,1513215823.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:43.496Z,1513215823.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:43.515Z,1513215823.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:43.896Z,1513215823.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:43.943Z,1513215823.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:44.298Z,1513215824.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:44.312Z,1513215824.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:44.695Z,1513215824.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:44.737Z,1513215824.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:45.094Z,1513215825.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:45.111Z,1513215825.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:45.510Z,1513215825.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:45.539Z,1513215825.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:45.938Z,1513215825.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:45.964Z,1513215825.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:46.320Z,1513215826.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:46.374Z,1513215826.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:46.687Z,1513215826.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:46.714Z,1513215826.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:47.087Z,1513215827.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:47.114Z,1513215827.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:47.487Z,1513215827.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:47.522Z,1513215827.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:47.891Z,1513215827.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:47.938Z,1513215827.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:48.307Z,1513215828.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:48.327Z,1513215828.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:48.711Z,1513215828.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:48.725Z,1513215828.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:49.106Z,1513215829.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:49.138Z,1513215829.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:49.519Z,1513215829.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:49.551Z,1513215829.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:49.895Z,1513215829.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:49.932Z,1513215829.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:50.295Z,1513215830.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:50.331Z,1513215830.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:50.692Z,1513215830.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:50.706Z,1513215830.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:51.092Z,1513215831.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:51.107Z,1513215831.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:51.514Z,1513215831.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:51.543Z,1513215831.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:51.906Z,1513215831.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:51.937Z,1513215831.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:52.305Z,1513215832.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:52.340Z,1513215832.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:52.725Z,1513215832.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:52.787Z,1513215832.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:53.096Z,1513215833.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:53.115Z,1513215833.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:53.503Z,1513215833.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:53.517Z,1513215833.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:53.900Z,1513215833.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:53.915Z,1513215833.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:54.304Z,1513215834.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:54.327Z,1513215834.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:54.716Z,1513215834.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:54.740Z,1513215834.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:55.114Z,1513215835.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:55.139Z,1513215835.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:55.490Z,1513215835.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:55.513Z,1513215835.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:55.898Z,1513215835.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:55.912Z,1513215835.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:56.306Z,1513215836.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:56.322Z,1513215836.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:56.695Z,1513215836.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:56.711Z,1513215836.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:57.100Z,1513215837.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:57.115Z,1513215837.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:57.501Z,1513215837.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:57.516Z,1513215837.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:57.901Z,1513215837.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:57.916Z,1513215837.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:58.300Z,1513215838.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:58.314Z,1513215838.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:58.695Z,1513215838.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:58.718Z,1513215838.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:59.127Z,1513215839.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:59.156Z,1513215839.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:59.505Z,1513215839.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:59.521Z,1513215839.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:43:59.905Z,1513215839.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:43:59.931Z,1513215839.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:00.311Z,1513215840.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:00.326Z,1513215840.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:00.701Z,1513215840.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:00.784Z,1513215840.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:01.092Z,1513215841.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:01.134Z,1513215841.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:01.496Z,1513215841.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:01.512Z,1513215841.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:01.891Z,1513215841.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:01.906Z,1513215841.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:02.340Z,1513215842.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:02.355Z,1513215842.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:02.710Z,1513215842.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:02.740Z,1513215842.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:03.105Z,1513215843.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:03.140Z,1513215843.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:03.511Z,1513215843.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:03.526Z,1513215843.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:03.904Z,1513215843.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:03.970Z,1513215843.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:04.288Z,1513215844.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:04.320Z,1513215844.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:04.689Z,1513215844.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:04.764Z,1513215844.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:05.091Z,1513215845.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:05.123Z,1513215845.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:05.552Z,1513215845.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:05.629Z,1513215845.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:05.906Z,1513215845.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:05.940Z,1513215845.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:06.340Z,1513215846.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:06.432Z,1513215846.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:06.694Z,1513215846.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:06.709Z,1513215846.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:07.098Z,1513215847.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:07.114Z,1513215847.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:07.496Z,1513215847.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:07.511Z,1513215847.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:07.896Z,1513215847.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:07.911Z,1513215847.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:08.310Z,1513215848.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:08.343Z,1513215848.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:08.730Z,1513215848.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:08.754Z,1513215848.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:09.107Z,1513215849.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:09.121Z,1513215849.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:09.495Z,1513215849.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:09.515Z,1513215849.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:09.898Z,1513215849.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:09.912Z,1513215849.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:10.298Z,1513215850.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:10.314Z,1513215850.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:10.692Z,1513215850.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:10.711Z,1513215850.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:11.095Z,1513215851.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:11.115Z,1513215851.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:11.507Z,1513215851.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:11.527Z,1513215851.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:11.906Z,1513215851.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:11.921Z,1513215851.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:12.330Z,1513215852.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:12.446Z,1513215852.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:12.687Z,1513215852.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:12.702Z,1513215852.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:13.093Z,1513215853.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:13.131Z,1513215853.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:13.494Z,1513215853.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:13.508Z,1513215853.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:13.896Z,1513215853.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:13.910Z,1513215853.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:14.310Z,1513215854.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:14.339Z,1513215854.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:17.857Z,1513215857.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:17.900Z,1513215857.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:18.011Z,1513215858.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:18.055Z,1513215858.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:18.351Z,1513215858.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:18.367Z,1513215858.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:18.759Z,1513215858.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:18.796Z,1513215858.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:19.156Z,1513215859.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:19.171Z,1513215859.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:19.560Z,1513215859.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:19.576Z,1513215859.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:19.577Z,1513215859.577 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2017-12-14T01:44:19.577Z,1513215859.577 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:44:19.579Z,1513215859.579 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:19.579Z,1513215859.579 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2017-12-14T01:44:19.579Z,1513215859.579 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:44:19.581Z,1513215859.581 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:19.581Z,1513215859.581 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2017-12-14T01:44:19.581Z,1513215859.581 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:44:19.614Z,1513215859.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:44:19.614Z,1513215859.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:44:19.614Z,1513215859.614 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:44:19.956Z,1513215859.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:19.990Z,1513215859.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:44:19.990Z,1513215859.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2017-12-14T01:44:19.991Z,1513215859.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:44:19.991Z,1513215859.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2017-12-14T01:44:19.991Z,1513215859.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:44:19.991Z,1513215859.991 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2017-12-14T01:44:20.368Z,1513215860.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:20.381Z,1513215860.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:44:20.382Z,1513215860.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:44:20.382Z,1513215860.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:44:20.382Z,1513215860.382 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:44:20.383Z,1513215860.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:44:20.383Z,1513215860.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:44:20.383Z,1513215860.383 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:44:20.384Z,1513215860.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:44:20.384Z,1513215860.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:44:20.766Z,1513215860.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:20.789Z,1513215860.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:21.162Z,1513215861.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:21.183Z,1513215861.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:21.557Z,1513215861.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:21.590Z,1513215861.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:21.963Z,1513215861.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:21.988Z,1513215861.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:22.352Z,1513215862.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:22.389Z,1513215862.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:22.749Z,1513215862.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:22.764Z,1513215862.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:23.177Z,1513215863.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:23.192Z,1513215863.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:23.566Z,1513215863.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:23.590Z,1513215863.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:23.962Z,1513215863.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:23.988Z,1513215863.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:24.355Z,1513215864.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:24.387Z,1513215864.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:24.753Z,1513215864.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:24.767Z,1513215864.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:25.183Z,1513215865.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:25.203Z,1513215865.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:25.571Z,1513215865.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:25.593Z,1513215865.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:25.974Z,1513215865.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:25.995Z,1513215865.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:26.353Z,1513215866.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:26.383Z,1513215866.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:26.748Z,1513215866.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:26.783Z,1513215866.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:27.162Z,1513215867.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:27.195Z,1513215867.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:27.577Z,1513215867.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:27.592Z,1513215867.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:27.967Z,1513215867.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:27.995Z,1513215867.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:28.364Z,1513215868.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:28.399Z,1513215868.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:28.753Z,1513215868.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:28.818Z,1513215868.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:29.158Z,1513215869.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:29.173Z,1513215869.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:29.562Z,1513215869.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:29.576Z,1513215869.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:29.970Z,1513215869.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:30.027Z,1513215870.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:30.357Z,1513215870.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:30.373Z,1513215870.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:30.756Z,1513215870.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:30.770Z,1513215870.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:31.162Z,1513215871.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:31.275Z,1513215871.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:31.559Z,1513215871.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:31.573Z,1513215871.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:31.954Z,1513215871.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:31.999Z,1513215871.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:32.363Z,1513215872.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:32.378Z,1513215872.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:32.834Z,1513215872.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:32.855Z,1513215872.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:33.162Z,1513215873.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:33.229Z,1513215873.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:33.552Z,1513215873.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:33.571Z,1513215873.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:33.966Z,1513215873.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:33.981Z,1513215873.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:34.354Z,1513215874.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:34.382Z,1513215874.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:34.756Z,1513215874.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:34.772Z,1513215874.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:35.177Z,1513215875.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:35.212Z,1513215875.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:35.562Z,1513215875.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:35.590Z,1513215875.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:35.967Z,1513215875.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:35.987Z,1513215875.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:36.361Z,1513215876.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:36.376Z,1513215876.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:36.749Z,1513215876.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:36.779Z,1513215876.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:37.156Z,1513215877.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:37.172Z,1513215877.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:37.566Z,1513215877.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:37.604Z,1513215877.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:37.947Z,1513215877.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:37.983Z,1513215877.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:38.371Z,1513215878.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:38.387Z,1513215878.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:38.775Z,1513215878.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:38.790Z,1513215878.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:39.173Z,1513215879.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:39.187Z,1513215879.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:39.548Z,1513215879.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:39.580Z,1513215879.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:39.947Z,1513215879.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:39.987Z,1513215879.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:40.352Z,1513215880.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:40.404Z,1513215880.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:40.799Z,1513215880.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:40.875Z,1513215880.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:41.178Z,1513215881.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:41.193Z,1513215881.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:41.575Z,1513215881.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:41.595Z,1513215881.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:41.966Z,1513215881.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:41.983Z,1513215881.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:42.361Z,1513215882.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:42.376Z,1513215882.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:42.744Z,1513215882.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:42.775Z,1513215882.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:43.166Z,1513215883.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:43.191Z,1513215883.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:43.575Z,1513215883.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:43.590Z,1513215883.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:43.967Z,1513215883.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:43.000Z,1513215884.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:44.348Z,1513215884.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:44.384Z,1513215884.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:44.751Z,1513215884.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:44.783Z,1513215884.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:45.158Z,1513215885.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:45.243Z,1513215885.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:45.562Z,1513215885.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:45.591Z,1513215885.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:45.972Z,1513215885.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:45.987Z,1513215885.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:46.363Z,1513215886.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:46.378Z,1513215886.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:46.760Z,1513215886.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:46.775Z,1513215886.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:47.190Z,1513215887.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:47.295Z,1513215887.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:47.585Z,1513215887.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:47.599Z,1513215887.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:47.970Z,1513215887.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:47.999Z,1513215887.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:48.354Z,1513215888.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:48.370Z,1513215888.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:48.752Z,1513215888.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:48.768Z,1513215888.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:49.170Z,1513215889.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:49.203Z,1513215889.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:49.571Z,1513215889.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:49.592Z,1513215889.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:49.970Z,1513215889.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:49.991Z,1513215889.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:50.355Z,1513215890.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:50.371Z,1513215890.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:50.758Z,1513215890.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:44:50.776Z,1513215890.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:51.222Z,1513215891.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:51.575Z,1513215891.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:51.973Z,1513215891.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:52.374Z,1513215892.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:52.815Z,1513215892.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:53.194Z,1513215893.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:53.654Z,1513215893.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:53.971Z,1513215893.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:54.399Z,1513215894.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:54.767Z,1513215894.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:55.173Z,1513215895.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:55.603Z,1513215895.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:55.991Z,1513215895.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:56.372Z,1513215896.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:56.803Z,1513215896.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:57.187Z,1513215897.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:57.600Z,1513215897.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:57.987Z,1513215897.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:58.391Z,1513215898.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:58.764Z,1513215898.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:59.262Z,1513215899.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:59.586Z,1513215899.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:44:59.980Z,1513215899.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:00.383Z,1513215900.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:00.771Z,1513215900.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:01.266Z,1513215901.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:01.591Z,1513215901.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:01.991Z,1513215901.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:02.375Z,1513215902.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:02.796Z,1513215902.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:03.217Z,1513215903.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:03.600Z,1513215903.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:03.992Z,1513215903.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:04.367Z,1513215904.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:04.775Z,1513215904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:05.179Z,1513215905.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:05.602Z,1513215905.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:06.000Z,1513215906.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:06.444Z,1513215906.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:06.775Z,1513215906.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:07.171Z,1513215907.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:07.579Z,1513215907.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:07.950Z,1513215907.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:07.978Z,1513215907.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:08.363Z,1513215908.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:08.394Z,1513215908.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:08.774Z,1513215908.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:08.789Z,1513215908.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:09.194Z,1513215909.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:09.647Z,1513215909.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:09.972Z,1513215909.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:10.375Z,1513215910.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:10.772Z,1513215910.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:11.179Z,1513215911.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:11.570Z,1513215911.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:11.604Z,1513215911.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:11.958Z,1513215911.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:11.973Z,1513215911.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:12.358Z,1513215912.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:12.373Z,1513215912.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:12.759Z,1513215912.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:12.773Z,1513215912.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:13.159Z,1513215913.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:13.174Z,1513215913.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:13.562Z,1513215913.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:13.583Z,1513215913.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:13.966Z,1513215913.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:14.028Z,1513215914.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:14.362Z,1513215914.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:14.383Z,1513215914.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:17.923Z,1513215917.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:17.980Z,1513215917.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:18.070Z,1513215918.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:18.114Z,1513215918.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:18.454Z,1513215918.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:18.470Z,1513215918.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:18.886Z,1513215918.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:18.933Z,1513215918.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:19.246Z,1513215919.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:19.281Z,1513215919.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:19.636Z,1513215919.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:19.686Z,1513215919.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:20.057Z,1513215920.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:20.091Z,1513215920.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:20.442Z,1513215920.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:20.494Z,1513215920.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:20.844Z,1513215920.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:20.930Z,1513215920.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:21.254Z,1513215921.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:21.275Z,1513215921.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:21.653Z,1513215921.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:21.668Z,1513215921.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:22.050Z,1513215922.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:22.064Z,1513215922.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:22.440Z,1513215922.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:22.460Z,1513215922.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:22.828Z,1513215922.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:22.924Z,1513215922.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:23.234Z,1513215923.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:23.249Z,1513215923.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:23.640Z,1513215923.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:23.680Z,1513215923.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:24.029Z,1513215924.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:24.044Z,1513215924.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:24.449Z,1513215924.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:24.479Z,1513215924.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:24.859Z,1513215924.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:24.959Z,1513215924.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:25.238Z,1513215925.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:25.252Z,1513215925.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:25.639Z,1513215925.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:25.659Z,1513215925.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:26.042Z,1513215926.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:26.056Z,1513215926.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:26.442Z,1513215926.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:26.456Z,1513215926.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:26.833Z,1513215926.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:26.847Z,1513215926.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:27.282Z,1513215927.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:27.313Z,1513215927.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:27.641Z,1513215927.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:27.656Z,1513215927.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:28.045Z,1513215928.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:28.059Z,1513215928.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:28.430Z,1513215928.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:28.573Z,1513215928.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:28.828Z,1513215928.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:28.855Z,1513215928.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:29.266Z,1513215929.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:29.301Z,1513215929.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:29.648Z,1513215929.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:30.075Z,1513215930.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:30.442Z,1513215930.442 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:45:30.442Z,1513215930.442 [NAL9602] Data Fault, FailCount= 2
2017-12-14T01:45:30.442Z,1513215930.442 [NAL9602](ERROR): Data Fault
2017-12-14T01:45:30.505Z,1513215930.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:30.519Z,1513215930.519 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:45:30.818Z,1513215930.818 [NAL9602](INFO): Powering down
2017-12-14T01:45:30.927Z,1513215930.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:31.244Z,1513215931.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:31.674Z,1513215931.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:31.687Z,1513215931.687 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:45:31.687Z,1513215931.687 [NAL9602] No Fault, FailCount= 2
2017-12-14T01:45:32.079Z,1513215932.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:32.454Z,1513215932.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:32.913Z,1513215932.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:33.261Z,1513215933.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:33.653Z,1513215933.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:34.052Z,1513215934.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:34.453Z,1513215934.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:34.955Z,1513215934.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:35.266Z,1513215935.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:35.631Z,1513215935.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:35.665Z,1513215935.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:36.034Z,1513215936.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:36.099Z,1513215936.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:36.432Z,1513215936.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:36.469Z,1513215936.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:36.831Z,1513215936.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:36.938Z,1513215936.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:37.246Z,1513215937.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:37.277Z,1513215937.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:37.638Z,1513215937.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:37.654Z,1513215937.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:38.039Z,1513215938.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:38.060Z,1513215938.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:38.440Z,1513215938.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:38.460Z,1513215938.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:38.840Z,1513215938.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:38.856Z,1513215938.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:39.231Z,1513215939.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:39.287Z,1513215939.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:39.631Z,1513215939.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:39.658Z,1513215939.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:40.030Z,1513215940.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:40.046Z,1513215940.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:40.435Z,1513215940.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:40.488Z,1513215940.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:40.836Z,1513215940.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:40.858Z,1513215940.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:41.303Z,1513215941.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:41.355Z,1513215941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:41.630Z,1513215941.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:41.695Z,1513215941.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:42.030Z,1513215942.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:42.061Z,1513215942.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:42.459Z,1513215942.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:42.511Z,1513215942.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:42.834Z,1513215942.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:42.860Z,1513215942.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:43.272Z,1513215943.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:43.308Z,1513215943.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:43.631Z,1513215943.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:43.664Z,1513215943.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:44.028Z,1513215944.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:44.063Z,1513215944.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:44.434Z,1513215944.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:44.469Z,1513215944.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:44.884Z,1513215944.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:44.936Z,1513215944.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:45.234Z,1513215945.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:45.248Z,1513215945.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:45.640Z,1513215945.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:45.655Z,1513215945.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:46.039Z,1513215946.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:46.053Z,1513215946.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:46.431Z,1513215946.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:46.445Z,1513215946.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:46.850Z,1513215946.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:46.927Z,1513215946.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:47.237Z,1513215947.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:47.264Z,1513215947.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:47.669Z,1513215947.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:47.706Z,1513215947.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:48.031Z,1513215948.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:48.058Z,1513215948.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:48.431Z,1513215948.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:48.457Z,1513215948.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:48.828Z,1513215948.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:48.913Z,1513215948.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:49.234Z,1513215949.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:49.249Z,1513215949.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:49.634Z,1513215949.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:49.648Z,1513215949.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:50.028Z,1513215950.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:50.064Z,1513215950.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:50.441Z,1513215950.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:50.455Z,1513215950.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:50.833Z,1513215950.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:50.975Z,1513215950.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:51.237Z,1513215951.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:51.259Z,1513215951.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:51.636Z,1513215951.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:51.651Z,1513215951.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:52.039Z,1513215952.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:52.053Z,1513215952.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:52.435Z,1513215952.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:52.455Z,1513215952.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:52.832Z,1513215952.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:52.847Z,1513215952.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:53.231Z,1513215953.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:53.270Z,1513215953.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:53.630Z,1513215953.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:53.666Z,1513215953.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:54.034Z,1513215954.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:54.069Z,1513215954.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:54.439Z,1513215954.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:54.459Z,1513215954.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:54.833Z,1513215954.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:54.848Z,1513215954.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:55.286Z,1513215955.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:55.302Z,1513215955.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:55.638Z,1513215955.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:55.665Z,1513215955.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:56.035Z,1513215956.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:56.050Z,1513215956.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:56.438Z,1513215956.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:56.453Z,1513215956.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:56.838Z,1513215956.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:56.855Z,1513215956.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:57.301Z,1513215957.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:57.344Z,1513215957.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:57.632Z,1513215957.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:57.658Z,1513215957.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:58.031Z,1513215958.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:58.063Z,1513215958.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:58.447Z,1513215958.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:58.481Z,1513215958.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:58.899Z,1513215958.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:58.926Z,1513215958.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:59.238Z,1513215959.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:59.263Z,1513215959.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:45:59.639Z,1513215959.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:45:59.659Z,1513215959.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:00.038Z,1513215960.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:00.065Z,1513215960.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:00.440Z,1513215960.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:00.455Z,1513215960.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:00.830Z,1513215960.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:00.929Z,1513215960.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:01.214Z,1513215961.214 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:46:01.238Z,1513215961.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:01.265Z,1513215961.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:01.637Z,1513215961.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:01.659Z,1513215961.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:02.038Z,1513215962.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:02.064Z,1513215962.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:02.441Z,1513215962.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:02.456Z,1513215962.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:02.856Z,1513215962.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:03.067Z,1513215963.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:03.230Z,1513215963.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:03.262Z,1513215963.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:03.673Z,1513215963.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:03.721Z,1513215963.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:04.037Z,1513215964.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:04.098Z,1513215964.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:04.434Z,1513215964.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:04.449Z,1513215964.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:04.833Z,1513215964.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:04.953Z,1513215964.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:05.237Z,1513215965.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:05.251Z,1513215965.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:05.637Z,1513215965.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:05.651Z,1513215965.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:06.042Z,1513215966.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:06.056Z,1513215966.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:06.438Z,1513215966.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:06.452Z,1513215966.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:06.869Z,1513215966.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:06.980Z,1513215966.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:07.251Z,1513215967.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:07.268Z,1513215967.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:07.631Z,1513215967.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:07.663Z,1513215967.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:08.035Z,1513215968.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:08.060Z,1513215968.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:08.435Z,1513215968.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:08.467Z,1513215968.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:08.836Z,1513215968.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:08.862Z,1513215968.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:09.266Z,1513215969.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:09.315Z,1513215969.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:09.631Z,1513215969.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:09.671Z,1513215969.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:10.034Z,1513215970.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:10.048Z,1513215970.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:10.440Z,1513215970.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:10.459Z,1513215970.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:10.844Z,1513215970.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:10.859Z,1513215970.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:11.264Z,1513215971.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:11.313Z,1513215971.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:11.654Z,1513215971.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:11.668Z,1513215971.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:12.018Z,1513215972.018 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:46:12.035Z,1513215972.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:12.064Z,1513215972.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:12.448Z,1513215972.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:12.463Z,1513215972.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:12.900Z,1513215972.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:12.934Z,1513215972.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:13.291Z,1513215973.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:13.367Z,1513215973.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:13.651Z,1513215973.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:13.672Z,1513215973.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:13.675Z,1513215973.675 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:46:13.675Z,1513215973.675 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:46:13.675Z,1513215973.675 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:46:13.675Z,1513215973.675 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:46:14.032Z,1513215974.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:14.058Z,1513215974.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:14.061Z,1513215974.061 [Default:CheckIn:D] Stopped
2017-12-14T01:46:14.061Z,1513215974.061 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:46:14.446Z,1513215974.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:14.461Z,1513215974.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:14.465Z,1513215974.465 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.977848 min 
2017-12-14T01:46:14.465Z,1513215974.465 [Default:CheckIn:E] Stopped
2017-12-14T01:46:14.465Z,1513215974.465 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:46:14.465Z,1513215974.465 [Default:CheckIn] Stopped
2017-12-14T01:46:14.466Z,1513215974.466 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:46:14.466Z,1513215974.466 [Default:CheckIn](INFO): Running loop #8
2017-12-14T01:46:14.466Z,1513215974.466 [Default:CheckIn] Running Loop=8
2017-12-14T01:46:14.466Z,1513215974.466 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:46:14.466Z,1513215974.466 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:46:17.988Z,1513215977.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:18.015Z,1513215978.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:18.108Z,1513215978.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:18.144Z,1513215978.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:18.482Z,1513215978.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:18.515Z,1513215978.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:18.950Z,1513215978.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:18.972Z,1513215978.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:19.274Z,1513215979.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:19.344Z,1513215979.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:19.674Z,1513215979.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:19.707Z,1513215979.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:20.073Z,1513215980.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:20.120Z,1513215980.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:20.489Z,1513215980.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:20.528Z,1513215980.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:20.880Z,1513215980.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:20.961Z,1513215980.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:21.280Z,1513215981.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:21.304Z,1513215981.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:21.700Z,1513215981.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:21.740Z,1513215981.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:22.065Z,1513215982.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:22.147Z,1513215982.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:22.488Z,1513215982.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:22.542Z,1513215982.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:22.881Z,1513215982.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:22.925Z,1513215982.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:23.296Z,1513215983.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:23.355Z,1513215983.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:23.678Z,1513215983.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:23.727Z,1513215983.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:24.065Z,1513215984.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:24.101Z,1513215984.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:24.504Z,1513215984.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:24.530Z,1513215984.530 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:46:24.530Z,1513215984.530 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:46:24.530Z,1513215984.530 [BPC1](ERROR): Data Fault
2017-12-14T01:46:24.552Z,1513215984.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:24.606Z,1513215984.606 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:46:24.892Z,1513215984.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:24.949Z,1513215984.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:25.294Z,1513215985.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:25.319Z,1513215985.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:25.677Z,1513215985.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:25.724Z,1513215985.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:25.765Z,1513215985.765 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:46:25.765Z,1513215985.765 [BPC1] No Fault, FailCount= 1
2017-12-14T01:46:26.074Z,1513215986.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:26.195Z,1513215986.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:26.476Z,1513215986.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:26.504Z,1513215986.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:26.949Z,1513215986.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:26.965Z,1513215986.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:27.297Z,1513215987.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:27.346Z,1513215987.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:27.666Z,1513215987.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:27.711Z,1513215987.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:28.084Z,1513215988.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:28.114Z,1513215988.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:28.482Z,1513215988.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:28.513Z,1513215988.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:28.948Z,1513215988.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:28.986Z,1513215988.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:29.282Z,1513215989.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:29.343Z,1513215989.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:29.664Z,1513215989.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:29.690Z,1513215989.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:30.067Z,1513215990.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:30.098Z,1513215990.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:30.493Z,1513215990.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:30.515Z,1513215990.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:30.947Z,1513215990.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:31.000Z,1513215991.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:31.288Z,1513215991.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:31.353Z,1513215991.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:31.664Z,1513215991.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:31.698Z,1513215991.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:32.084Z,1513215992.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:32.155Z,1513215992.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:32.485Z,1513215992.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:32.508Z,1513215992.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:32.937Z,1513215992.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:32.980Z,1513215992.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:33.382Z,1513215993.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:33.735Z,1513215993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:34.125Z,1513215994.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:34.572Z,1513215994.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:34.984Z,1513215994.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:35.336Z,1513215995.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:35.715Z,1513215995.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:35.781Z,1513215995.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:36.073Z,1513215996.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:36.101Z,1513215996.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:36.489Z,1513215996.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:36.575Z,1513215996.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:36.888Z,1513215996.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:36.937Z,1513215996.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:37.287Z,1513215997.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:37.343Z,1513215997.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:37.683Z,1513215997.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:37.734Z,1513215997.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:38.065Z,1513215998.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:38.141Z,1513215998.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:38.486Z,1513215998.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:38.555Z,1513215998.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:38.902Z,1513215998.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:38.932Z,1513215998.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:39.301Z,1513215999.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:39.376Z,1513215999.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:39.674Z,1513215999.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:39.717Z,1513215999.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:40.104Z,1513216000.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:40.172Z,1513216000.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:40.491Z,1513216000.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:40.538Z,1513216000.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:40.942Z,1513216000.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:40.985Z,1513216000.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:41.286Z,1513216001.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:41.319Z,1513216001.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:41.667Z,1513216001.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:41.699Z,1513216001.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:42.064Z,1513216002.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:42.099Z,1513216002.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:42.487Z,1513216002.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:42.502Z,1513216002.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:42.936Z,1513216002.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:42.973Z,1513216002.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:43.278Z,1513216003.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:43.320Z,1513216003.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:43.663Z,1513216003.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:43.699Z,1513216003.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:44.068Z,1513216004.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:44.082Z,1513216004.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:44.479Z,1513216004.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:44.511Z,1513216004.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:44.939Z,1513216004.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:44.970Z,1513216004.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:45.277Z,1513216005.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:45.311Z,1513216005.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:45.663Z,1513216005.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:45.671Z,1513216005.671 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:46:45.671Z,1513216005.671 [BPC1] Data Fault, FailCount= 2
2017-12-14T01:46:45.671Z,1513216005.671 [BPC1](ERROR): Data Fault
2017-12-14T01:46:45.704Z,1513216005.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:45.734Z,1513216005.734 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:46:46.070Z,1513216006.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:46.085Z,1513216006.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:46.481Z,1513216006.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:46.516Z,1513216006.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:46.927Z,1513216006.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:46.966Z,1513216006.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:47.005Z,1513216007.005 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:46:47.005Z,1513216007.005 [BPC1] No Fault, FailCount= 2
2017-12-14T01:46:47.293Z,1513216007.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:47.407Z,1513216007.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:47.672Z,1513216007.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:47.714Z,1513216007.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:48.065Z,1513216008.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:48.080Z,1513216008.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:48.482Z,1513216008.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:48.512Z,1513216008.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:48.881Z,1513216008.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:48.980Z,1513216008.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:49.283Z,1513216009.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:49.303Z,1513216009.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:49.686Z,1513216009.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:49.738Z,1513216009.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:50.064Z,1513216010.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:50.101Z,1513216010.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:50.205Z,1513216010.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:50.486Z,1513216010.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:50.501Z,1513216010.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:50.882Z,1513216010.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:50.923Z,1513216010.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:51.001Z,1513216011.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:51.313Z,1513216011.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:51.352Z,1513216011.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:51.660Z,1513216011.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:51.676Z,1513216011.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:52.071Z,1513216012.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:52.102Z,1513216012.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:52.472Z,1513216012.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:52.487Z,1513216012.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:52.920Z,1513216012.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:52.967Z,1513216012.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:53.277Z,1513216013.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:53.319Z,1513216013.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:53.690Z,1513216013.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:53.715Z,1513216013.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:54.077Z,1513216014.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:54.092Z,1513216014.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:54.529Z,1513216014.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:54.548Z,1513216014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:54.916Z,1513216014.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:54.943Z,1513216014.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:55.263Z,1513216015.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:55.295Z,1513216015.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:55.672Z,1513216015.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:46:55.719Z,1513216015.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:56.139Z,1513216016.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:56.490Z,1513216016.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:56.935Z,1513216016.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:57.361Z,1513216017.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:57.691Z,1513216017.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:58.090Z,1513216018.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:58.487Z,1513216018.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:58.929Z,1513216018.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:59.288Z,1513216019.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:46:59.707Z,1513216019.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:00.113Z,1513216020.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:00.506Z,1513216020.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:00.947Z,1513216020.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:01.310Z,1513216021.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:01.678Z,1513216021.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:02.103Z,1513216022.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:02.556Z,1513216022.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:02.968Z,1513216022.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:03.309Z,1513216023.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:03.699Z,1513216023.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:04.090Z,1513216024.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:04.578Z,1513216024.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:04.916Z,1513216024.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:05.304Z,1513216025.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:05.741Z,1513216025.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:06.087Z,1513216026.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:06.499Z,1513216026.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:06.899Z,1513216026.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:07.323Z,1513216027.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:07.755Z,1513216027.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:08.103Z,1513216028.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:08.552Z,1513216028.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:09.019Z,1513216029.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:09.342Z,1513216029.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:09.693Z,1513216029.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:10.096Z,1513216030.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:10.492Z,1513216030.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:10.983Z,1513216030.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:11.307Z,1513216031.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:11.696Z,1513216031.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:12.095Z,1513216032.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:12.507Z,1513216032.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:12.980Z,1513216032.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:13.343Z,1513216033.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:13.689Z,1513216033.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:14.091Z,1513216034.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:14.609Z,1513216034.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:18.008Z,1513216038.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:18.176Z,1513216038.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:18.532Z,1513216038.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x42134 got:0x42550
2017-12-14T01:47:18.559Z,1513216038.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:18.939Z,1513216038.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:19.315Z,1513216039.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:19.720Z,1513216039.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:20.115Z,1513216040.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:20.513Z,1513216040.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:20.514Z,1513216040.514 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2017-12-14T01:47:20.514Z,1513216040.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:47:20.515Z,1513216040.515 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:20.515Z,1513216040.515 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2017-12-14T01:47:20.516Z,1513216040.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:47:20.518Z,1513216040.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:20.518Z,1513216040.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2017-12-14T01:47:20.518Z,1513216040.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:47:20.546Z,1513216040.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:47:20.546Z,1513216040.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:47:20.546Z,1513216040.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:47:20.916Z,1513216040.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:47:20.916Z,1513216040.916 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2017-12-14T01:47:20.917Z,1513216040.917 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:47:20.917Z,1513216040.917 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2017-12-14T01:47:20.917Z,1513216040.917 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:47:20.918Z,1513216040.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2017-12-14T01:47:21.316Z,1513216041.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:47:21.321Z,1513216041.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:47:21.321Z,1513216041.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:47:21.322Z,1513216041.322 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:47:21.322Z,1513216041.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:47:21.322Z,1513216041.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:47:21.323Z,1513216041.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:47:21.323Z,1513216041.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:47:21.324Z,1513216041.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:47:21.740Z,1513216041.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:22.124Z,1513216042.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:22.531Z,1513216042.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:22.963Z,1513216042.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:23.338Z,1513216043.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:23.699Z,1513216043.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:24.119Z,1513216044.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:24.527Z,1513216044.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:24.984Z,1513216044.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:25.366Z,1513216045.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:25.708Z,1513216045.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:26.121Z,1513216046.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:26.534Z,1513216046.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:26.947Z,1513216046.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:27.324Z,1513216047.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:27.716Z,1513216047.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:28.107Z,1513216048.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:28.540Z,1513216048.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:29.037Z,1513216049.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:29.350Z,1513216049.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:29.720Z,1513216049.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:30.165Z,1513216050.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:30.536Z,1513216050.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:30.977Z,1513216050.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:31.371Z,1513216051.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:31.770Z,1513216051.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:32.111Z,1513216052.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:32.562Z,1513216052.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:32.908Z,1513216052.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:33.319Z,1513216053.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:33.720Z,1513216053.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:34.122Z,1513216054.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:34.563Z,1513216054.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:34.918Z,1513216054.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:35.319Z,1513216055.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:35.702Z,1513216055.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:36.123Z,1513216056.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:36.522Z,1513216056.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:36.968Z,1513216056.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:37.351Z,1513216057.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:37.758Z,1513216057.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:38.108Z,1513216058.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:38.537Z,1513216058.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:38.958Z,1513216058.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:39.324Z,1513216059.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:39.715Z,1513216059.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:40.109Z,1513216060.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:40.523Z,1513216060.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:41.011Z,1513216061.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:41.351Z,1513216061.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:41.708Z,1513216061.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:42.109Z,1513216062.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:42.520Z,1513216062.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:42.967Z,1513216062.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:43.322Z,1513216063.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:43.723Z,1513216063.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:44.156Z,1513216064.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:44.524Z,1513216064.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:44.973Z,1513216064.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:45.334Z,1513216065.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:45.724Z,1513216065.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:46.098Z,1513216066.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:46.527Z,1513216066.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:46.932Z,1513216066.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:47.456Z,1513216067.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:47.727Z,1513216067.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:48.108Z,1513216068.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:48.545Z,1513216068.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:48.942Z,1513216068.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:49.309Z,1513216069.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:49.711Z,1513216069.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:50.107Z,1513216070.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:50.512Z,1513216070.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:50.967Z,1513216070.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:51.318Z,1513216071.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:51.711Z,1513216071.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:52.107Z,1513216072.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:52.523Z,1513216072.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:53.014Z,1513216073.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:53.366Z,1513216073.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:53.773Z,1513216073.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:54.126Z,1513216074.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:54.554Z,1513216074.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:54.978Z,1513216074.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:55.368Z,1513216075.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:55.723Z,1513216075.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:56.114Z,1513216076.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:56.517Z,1513216076.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:57.011Z,1513216077.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:57.332Z,1513216077.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:57.718Z,1513216077.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:58.117Z,1513216078.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:58.532Z,1513216078.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:58.986Z,1513216078.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:59.324Z,1513216079.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:47:59.698Z,1513216079.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:00.150Z,1513216080.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:00.535Z,1513216080.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:00.905Z,1513216080.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:01.348Z,1513216081.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:01.715Z,1513216081.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:02.108Z,1513216082.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:02.509Z,1513216082.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:02.915Z,1513216082.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:03.388Z,1513216083.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:03.759Z,1513216083.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:04.116Z,1513216084.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:04.518Z,1513216084.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:05.010Z,1513216085.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:05.311Z,1513216085.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:05.707Z,1513216085.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:06.105Z,1513216086.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:06.560Z,1513216086.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:06.969Z,1513216086.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:07.325Z,1513216087.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:07.712Z,1513216087.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:08.111Z,1513216088.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:08.523Z,1513216088.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:08.965Z,1513216088.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:09.348Z,1513216089.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:09.787Z,1513216089.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:10.131Z,1513216090.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:10.513Z,1513216090.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:10.977Z,1513216090.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:11.318Z,1513216091.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:11.726Z,1513216091.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:12.126Z,1513216092.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:12.548Z,1513216092.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:13.002Z,1513216093.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:13.323Z,1513216093.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:13.712Z,1513216093.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:14.109Z,1513216094.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:14.520Z,1513216094.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:18.151Z,1513216098.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:18.276Z,1513216098.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:18.664Z,1513216098.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:19.056Z,1513216099.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:19.503Z,1513216099.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:19.863Z,1513216099.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:20.264Z,1513216100.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:20.668Z,1513216100.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:21.046Z,1513216101.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:21.577Z,1513216101.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:21.847Z,1513216101.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:22.243Z,1513216102.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:22.652Z,1513216102.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:23.051Z,1513216103.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:23.445Z,1513216103.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:23.842Z,1513216103.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:24.248Z,1513216104.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:24.639Z,1513216104.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:25.043Z,1513216105.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:25.441Z,1513216105.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:25.867Z,1513216105.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:26.252Z,1513216106.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:26.658Z,1513216106.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:27.047Z,1513216107.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:27.451Z,1513216107.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:27.886Z,1513216107.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:28.241Z,1513216108.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:28.654Z,1513216108.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:29.055Z,1513216109.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:29.455Z,1513216109.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:29.841Z,1513216109.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:30.247Z,1513216110.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:30.644Z,1513216110.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:31.043Z,1513216111.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:31.442Z,1513216111.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:31.856Z,1513216111.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:32.253Z,1513216112.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:32.655Z,1513216112.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:33.041Z,1513216113.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:33.451Z,1513216113.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:33.844Z,1513216113.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:34.251Z,1513216114.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:34.655Z,1513216114.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:35.055Z,1513216115.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:35.457Z,1513216115.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:35.854Z,1513216115.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:36.239Z,1513216116.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:36.634Z,1513216116.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:37.040Z,1513216117.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:37.443Z,1513216117.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:37.867Z,1513216117.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:38.287Z,1513216118.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:38.671Z,1513216118.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:39.043Z,1513216119.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:39.443Z,1513216119.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:39.886Z,1513216119.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:40.290Z,1513216120.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:40.656Z,1513216120.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:41.055Z,1513216121.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:41.488Z,1513216121.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:41.851Z,1513216121.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:42.275Z,1513216122.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:42.647Z,1513216122.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:43.040Z,1513216123.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:43.449Z,1513216123.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:43.853Z,1513216123.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:44.256Z,1513216124.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:44.685Z,1513216124.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:45.039Z,1513216125.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:45.451Z,1513216125.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:45.845Z,1513216125.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:46.246Z,1513216126.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:46.656Z,1513216126.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:47.054Z,1513216127.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:47.452Z,1513216127.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:47.914Z,1513216127.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:48.236Z,1513216128.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:48.643Z,1513216128.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:49.051Z,1513216129.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:49.447Z,1513216129.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:49.852Z,1513216129.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:50.252Z,1513216130.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:50.690Z,1513216130.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:51.074Z,1513216131.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:51.451Z,1513216131.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:51.835Z,1513216131.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:52.259Z,1513216132.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:52.664Z,1513216132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:53.061Z,1513216133.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:53.464Z,1513216133.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:53.857Z,1513216133.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:54.284Z,1513216134.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:54.638Z,1513216134.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:55.040Z,1513216135.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:55.445Z,1513216135.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:55.842Z,1513216135.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:56.269Z,1513216136.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:56.640Z,1513216136.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:57.043Z,1513216137.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:57.488Z,1513216137.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:57.839Z,1513216137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:58.240Z,1513216138.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:58.673Z,1513216138.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:59.074Z,1513216139.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:59.451Z,1513216139.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:59.841Z,1513216139.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:48:59.854Z,1513216139.854 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:49:00.240Z,1513216140.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:00.681Z,1513216140.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:01.044Z,1513216141.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:01.459Z,1513216141.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:01.852Z,1513216141.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:02.264Z,1513216142.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:02.695Z,1513216142.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:03.047Z,1513216143.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:03.494Z,1513216143.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:03.855Z,1513216143.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:04.298Z,1513216144.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:04.654Z,1513216144.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:05.059Z,1513216145.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:05.432Z,1513216145.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:05.835Z,1513216145.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:06.232Z,1513216146.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:06.736Z,1513216146.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:07.132Z,1513216147.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:07.444Z,1513216147.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:07.847Z,1513216147.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:08.238Z,1513216148.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:08.638Z,1513216148.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:09.039Z,1513216149.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:09.441Z,1513216149.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:09.842Z,1513216149.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:10.289Z,1513216150.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:10.645Z,1513216150.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:11.043Z,1513216151.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:11.440Z,1513216151.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:11.839Z,1513216151.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:12.239Z,1513216152.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:12.686Z,1513216152.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:13.086Z,1513216153.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:13.456Z,1513216153.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:13.835Z,1513216153.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:14.230Z,1513216154.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:14.635Z,1513216154.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:18.110Z,1513216158.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:18.210Z,1513216158.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:18.606Z,1513216158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:19.005Z,1513216159.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:19.393Z,1513216159.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:19.784Z,1513216159.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:20.183Z,1513216160.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:20.598Z,1513216160.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:20.991Z,1513216160.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:21.387Z,1513216161.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:21.796Z,1513216161.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:22.200Z,1513216162.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:22.603Z,1513216162.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:23.054Z,1513216163.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:23.391Z,1513216163.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:23.792Z,1513216163.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:24.186Z,1513216164.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:24.739Z,1513216164.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:25.048Z,1513216165.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:25.395Z,1513216165.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:25.790Z,1513216165.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:26.258Z,1513216166.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:26.584Z,1513216166.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:27.011Z,1513216167.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:27.396Z,1513216167.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:27.802Z,1513216167.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:28.195Z,1513216168.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:28.607Z,1513216168.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:28.994Z,1513216168.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:29.449Z,1513216169.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:29.797Z,1513216169.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:30.178Z,1513216170.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:30.607Z,1513216170.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:31.014Z,1513216171.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:31.407Z,1513216171.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:31.782Z,1513216171.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:32.208Z,1513216172.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:32.634Z,1513216172.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:32.988Z,1513216172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:33.386Z,1513216173.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:33.790Z,1513216173.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:34.195Z,1513216174.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:34.591Z,1513216174.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:34.987Z,1513216174.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:35.419Z,1513216175.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:35.824Z,1513216175.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:36.183Z,1513216176.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:36.595Z,1513216176.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:37.017Z,1513216177.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:37.389Z,1513216177.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:37.784Z,1513216177.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:38.188Z,1513216178.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:38.594Z,1513216178.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:39.044Z,1513216179.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:39.424Z,1513216179.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:39.800Z,1513216179.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:40.192Z,1513216180.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:40.599Z,1513216180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:40.991Z,1513216180.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:41.392Z,1513216181.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:41.776Z,1513216181.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:42.228Z,1513216182.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:42.611Z,1513216182.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:43.017Z,1513216183.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:43.403Z,1513216183.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:43.794Z,1513216183.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:44.183Z,1513216184.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:44.585Z,1513216184.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:44.991Z,1513216184.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:45.428Z,1513216185.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:45.785Z,1513216185.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:46.190Z,1513216186.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:46.592Z,1513216186.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:46.987Z,1513216186.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:47.430Z,1513216187.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:47.826Z,1513216187.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:48.182Z,1513216188.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:48.665Z,1513216188.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:48.999Z,1513216188.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:49.427Z,1513216189.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:49.788Z,1513216189.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:50.181Z,1513216190.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:50.591Z,1513216190.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:51.045Z,1513216191.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:51.390Z,1513216191.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:51.803Z,1513216191.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:52.195Z,1513216192.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:52.594Z,1513216192.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:52.988Z,1513216192.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:53.383Z,1513216193.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:53.785Z,1513216193.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:54.192Z,1513216194.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:54.589Z,1513216194.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:55.050Z,1513216195.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:55.395Z,1513216195.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:55.788Z,1513216195.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:56.192Z,1513216196.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:56.585Z,1513216196.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:56.989Z,1513216196.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:57.397Z,1513216197.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:57.838Z,1513216197.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:58.289Z,1513216198.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:58.600Z,1513216198.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:58.988Z,1513216198.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:59.384Z,1513216199.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:49:59.784Z,1513216199.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:00.185Z,1513216200.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:00.594Z,1513216200.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:00.999Z,1513216200.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:01.439Z,1513216201.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:01.784Z,1513216201.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:02.191Z,1513216202.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:02.595Z,1513216202.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:02.996Z,1513216202.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:03.391Z,1513216203.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:03.799Z,1513216203.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:04.197Z,1513216204.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:04.636Z,1513216204.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:05.010Z,1513216205.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:05.390Z,1513216205.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:05.796Z,1513216205.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:06.196Z,1513216206.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:06.596Z,1513216206.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:06.999Z,1513216206.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:07.411Z,1513216207.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:07.839Z,1513216207.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:08.187Z,1513216208.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:08.586Z,1513216208.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:08.992Z,1513216208.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:09.399Z,1513216209.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:09.851Z,1513216209.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:10.246Z,1513216210.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:10.604Z,1513216210.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:11.049Z,1513216211.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:11.381Z,1513216211.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:11.807Z,1513216211.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:12.188Z,1513216212.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:12.610Z,1513216212.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:12.987Z,1513216212.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:13.395Z,1513216213.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:13.787Z,1513216213.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:14.246Z,1513216214.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:14.583Z,1513216214.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:14.997Z,1513216214.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:18.419Z,1513216218.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:18.566Z,1513216218.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:18.978Z,1513216218.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:19.339Z,1513216219.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:19.692Z,1513216219.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:20.116Z,1513216220.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:20.523Z,1513216220.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:20.896Z,1513216220.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:21.319Z,1513216221.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:21.319Z,1513216221.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2017-12-14T01:50:21.319Z,1513216221.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:50:21.347Z,1513216221.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:50:21.700Z,1513216221.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:21.700Z,1513216221.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2017-12-14T01:50:21.700Z,1513216221.700 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:50:21.702Z,1513216221.702 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:21.702Z,1513216221.702 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2017-12-14T01:50:21.702Z,1513216221.702 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:50:21.713Z,1513216221.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:50:21.714Z,1513216221.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2017-12-14T01:50:21.714Z,1513216221.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:50:21.714Z,1513216221.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:50:22.104Z,1513216222.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:50:22.105Z,1513216222.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:50:22.105Z,1513216222.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:50:22.117Z,1513216222.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:50:22.117Z,1513216222.117 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2017-12-14T01:50:22.118Z,1513216222.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:50:22.118Z,1513216222.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2017-12-14T01:50:22.502Z,1513216222.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:22.502Z,1513216222.502 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:50:22.503Z,1513216222.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:50:22.503Z,1513216222.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:50:22.503Z,1513216222.503 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:50:22.504Z,1513216222.504 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:50:22.504Z,1513216222.504 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:50:22.902Z,1513216222.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:23.314Z,1513216223.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:23.754Z,1513216223.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:24.107Z,1513216224.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:24.513Z,1513216224.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:24.969Z,1513216224.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:25.290Z,1513216225.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:25.715Z,1513216225.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:26.103Z,1513216226.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:26.491Z,1513216226.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:26.990Z,1513216226.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:27.308Z,1513216227.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:27.696Z,1513216227.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:28.100Z,1513216228.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:28.500Z,1513216228.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:28.962Z,1513216228.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:29.312Z,1513216229.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:29.694Z,1513216229.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:30.092Z,1513216230.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:30.507Z,1513216230.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:31.010Z,1513216231.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:31.338Z,1513216231.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:31.705Z,1513216231.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:32.163Z,1513216232.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:32.512Z,1513216232.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:32.977Z,1513216232.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:33.355Z,1513216233.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:33.709Z,1513216233.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:34.150Z,1513216234.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:34.515Z,1513216234.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:34.914Z,1513216234.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:35.307Z,1513216235.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:35.691Z,1513216235.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:36.090Z,1513216236.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:36.529Z,1513216236.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:36.892Z,1513216236.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:37.316Z,1513216237.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:37.704Z,1513216237.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:38.097Z,1513216238.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:38.493Z,1513216238.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:38.972Z,1513216238.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:39.295Z,1513216239.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:39.734Z,1513216239.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:40.107Z,1513216240.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:40.507Z,1513216240.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:40.946Z,1513216240.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:40.967Z,1513216240.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:41.279Z,1513216241.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:41.317Z,1513216241.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:41.667Z,1513216241.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:41.693Z,1513216241.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:42.093Z,1513216242.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:42.541Z,1513216242.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:43.008Z,1513216243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:43.342Z,1513216243.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:43.708Z,1513216243.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:44.100Z,1513216244.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:44.501Z,1513216244.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:44.962Z,1513216244.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:45.295Z,1513216245.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:45.667Z,1513216245.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:45.704Z,1513216245.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:46.090Z,1513216246.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:46.105Z,1513216246.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:46.481Z,1513216246.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:50:46.508Z,1513216246.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:46.982Z,1513216246.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:47.339Z,1513216247.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:47.699Z,1513216247.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:48.098Z,1513216248.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:48.495Z,1513216248.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:48.899Z,1513216248.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:49.381Z,1513216249.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:49.721Z,1513216249.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:50.093Z,1513216250.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:50.490Z,1513216250.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:50.898Z,1513216250.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:51.336Z,1513216251.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:51.698Z,1513216251.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:52.103Z,1513216252.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:52.544Z,1513216252.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:52.977Z,1513216252.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:53.331Z,1513216253.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:53.696Z,1513216253.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:54.095Z,1513216254.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:54.519Z,1513216254.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:54.974Z,1513216254.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:55.327Z,1513216255.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:55.729Z,1513216255.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:56.139Z,1513216256.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:56.492Z,1513216256.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:56.972Z,1513216256.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:57.292Z,1513216257.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:57.698Z,1513216257.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:58.096Z,1513216258.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:58.501Z,1513216258.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:59.027Z,1513216259.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:59.339Z,1513216259.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:50:59.703Z,1513216259.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:00.099Z,1513216260.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:00.503Z,1513216260.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:00.962Z,1513216260.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:01.339Z,1513216261.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:01.709Z,1513216261.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:02.106Z,1513216262.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:02.505Z,1513216262.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:02.875Z,1513216262.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:03.308Z,1513216263.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:03.702Z,1513216263.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:04.110Z,1513216264.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:04.542Z,1513216264.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:04.908Z,1513216264.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:05.354Z,1513216265.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:05.692Z,1513216265.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:06.091Z,1513216266.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:06.492Z,1513216266.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:06.977Z,1513216266.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:07.320Z,1513216267.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:07.697Z,1513216267.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:08.120Z,1513216268.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:08.541Z,1513216268.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:08.966Z,1513216268.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:09.316Z,1513216269.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:09.709Z,1513216269.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:10.105Z,1513216270.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:10.511Z,1513216270.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:10.977Z,1513216270.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:11.295Z,1513216271.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:11.750Z,1513216271.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:12.104Z,1513216272.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:12.503Z,1513216272.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:12.960Z,1513216272.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:13.314Z,1513216273.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:13.710Z,1513216273.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:14.108Z,1513216274.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:14.506Z,1513216274.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:14.510Z,1513216274.510 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:46:14.5Z
2017-12-14T01:51:14.510Z,1513216274.510 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T01:51:14.510Z,1513216274.510 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T01:51:15.043Z,1513216275.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:15.806Z,1513216275.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:19.531Z,1513216279.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:19.619Z,1513216279.619 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0032.lzma
2017-12-14T01:51:19.724Z,1513216279.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:20.080Z,1513216280.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:20.407Z,1513216280.407 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0032.lzma.bak
2017-12-14T01:51:20.407Z,1513216280.407 [DataOverHttps](INFO): SBD MOMSN=5437374
2017-12-14T01:51:20.502Z,1513216280.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:23.188Z,1513216283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:23.348Z,1513216283.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:29.222Z,1513216289.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:29.395Z,1513216289.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:29.759Z,1513216289.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:30.167Z,1513216290.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:30.524Z,1513216290.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:37.472Z,1513216297.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:37.564Z,1513216297.564 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0033.lzma
2017-12-14T01:51:37.695Z,1513216297.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:38.083Z,1513216298.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:40.057Z,1513216300.057 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0033.lzma.bak
2017-12-14T01:51:40.057Z,1513216300.057 [DataOverHttps](INFO): SBD MOMSN=5437376
2017-12-14T01:51:40.232Z,1513216300.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:41.953Z,1513216301.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:41.956Z,1513216301.956 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T01:51:41.956Z,1513216301.956 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T01:51:41.957Z,1513216301.957 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T01:51:42.096Z,1513216302.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:45.525Z,1513216305.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:45.687Z,1513216305.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:46.035Z,1513216306.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:46.425Z,1513216306.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:46.834Z,1513216306.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:47.358Z,1513216307.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:47.631Z,1513216307.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:48.096Z,1513216308.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:48.437Z,1513216308.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:48.946Z,1513216308.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:49.235Z,1513216309.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:49.658Z,1513216309.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:50.023Z,1513216310.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:50.456Z,1513216310.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:50.820Z,1513216310.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:51.251Z,1513216311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:51.647Z,1513216311.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:52.020Z,1513216312.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:52.419Z,1513216312.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:52.819Z,1513216312.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:53.230Z,1513216313.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:53.620Z,1513216313.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:54.035Z,1513216314.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:54.436Z,1513216314.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:54.913Z,1513216314.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:55.217Z,1513216315.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:55.622Z,1513216315.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:56.015Z,1513216316.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:56.425Z,1513216316.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:56.819Z,1513216316.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:57.291Z,1513216317.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:57.630Z,1513216317.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:58.122Z,1513216318.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:58.399Z,1513216318.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:58.832Z,1513216318.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:59.318Z,1513216319.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:51:59.617Z,1513216319.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:00.024Z,1513216320.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:00.455Z,1513216320.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:00.831Z,1513216320.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:01.299Z,1513216321.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:01.631Z,1513216321.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:02.021Z,1513216322.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:02.421Z,1513216322.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:02.917Z,1513216322.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:03.227Z,1513216323.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:03.663Z,1513216323.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:04.080Z,1513216324.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:04.432Z,1513216324.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:04.904Z,1513216324.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:05.244Z,1513216325.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:05.640Z,1513216325.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:06.035Z,1513216326.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:06.427Z,1513216326.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:06.902Z,1513216326.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:07.247Z,1513216327.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:07.633Z,1513216327.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:08.039Z,1513216328.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:08.423Z,1513216328.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:08.840Z,1513216328.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:09.228Z,1513216329.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:09.647Z,1513216329.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:10.127Z,1513216330.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:10.447Z,1513216330.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:10.828Z,1513216330.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:11.211Z,1513216331.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:11.607Z,1513216331.607 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:52:11.608Z,1513216331.608 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:52:11.608Z,1513216331.608 [BPC1](ERROR): Data Fault
2017-12-14T01:52:11.615Z,1513216331.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:11.647Z,1513216331.647 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:52:12.011Z,1513216332.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:12.412Z,1513216332.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:12.813Z,1513216332.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:12.858Z,1513216332.858 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:52:12.858Z,1513216332.858 [BPC1] No Fault, FailCount= 1
2017-12-14T01:52:13.430Z,1513216333.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:13.637Z,1513216333.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:14.047Z,1513216334.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:14.408Z,1513216334.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:14.438Z,1513216334.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:14.820Z,1513216334.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:15.234Z,1513216335.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:15.306Z,1513216335.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:15.619Z,1513216335.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:15.637Z,1513216335.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:16.031Z,1513216336.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:16.436Z,1513216336.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:16.891Z,1513216336.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:17.227Z,1513216337.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:17.624Z,1513216337.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:18.010Z,1513216338.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:18.439Z,1513216338.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:18.807Z,1513216338.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:19.224Z,1513216339.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:19.675Z,1513216339.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:20.023Z,1513216340.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:20.410Z,1513216340.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:20.815Z,1513216340.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:21.219Z,1513216341.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:21.651Z,1513216341.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:22.036Z,1513216342.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:22.429Z,1513216342.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:22.914Z,1513216342.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:23.272Z,1513216343.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:23.626Z,1513216343.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:24.026Z,1513216344.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:24.424Z,1513216344.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:24.822Z,1513216344.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:25.230Z,1513216345.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:25.635Z,1513216345.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:26.039Z,1513216346.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:26.405Z,1513216346.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:26.841Z,1513216346.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:27.261Z,1513216347.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:27.616Z,1513216347.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:28.036Z,1513216348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:28.411Z,1513216348.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:28.439Z,1513216348.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:28.814Z,1513216348.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:28.843Z,1513216348.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:29.253Z,1513216349.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:29.297Z,1513216349.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:29.607Z,1513216349.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:29.641Z,1513216349.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:29.998Z,1513216349.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:30.019Z,1513216350.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:30.401Z,1513216350.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:30.416Z,1513216350.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:30.803Z,1513216350.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:30.818Z,1513216350.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:31.219Z,1513216351.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:31.298Z,1513216351.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:31.606Z,1513216351.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:31.620Z,1513216351.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:32.006Z,1513216352.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:32.021Z,1513216352.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:32.407Z,1513216352.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:32.494Z,1513216352.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:32.798Z,1513216352.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:32.819Z,1513216352.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:33.192Z,1513216353.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:33.278Z,1513216353.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:33.603Z,1513216353.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:33.618Z,1513216353.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:34.014Z,1513216354.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:34.071Z,1513216354.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:34.418Z,1513216354.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:34.432Z,1513216354.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:34.811Z,1513216354.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:34.892Z,1513216354.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:35.191Z,1513216355.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:35.224Z,1513216355.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:35.595Z,1513216355.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:35.661Z,1513216355.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:35.996Z,1513216355.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:36.015Z,1513216356.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:36.406Z,1513216356.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:36.422Z,1513216356.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:36.801Z,1513216356.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:36.816Z,1513216356.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:37.208Z,1513216357.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:37.231Z,1513216357.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:37.616Z,1513216357.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:37.635Z,1513216357.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:38.014Z,1513216358.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:38.031Z,1513216358.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:38.408Z,1513216358.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:38.423Z,1513216358.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:38.831Z,1513216358.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:38.862Z,1513216358.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:39.194Z,1513216359.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:39.244Z,1513216359.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:39.597Z,1513216359.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:39.631Z,1513216359.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:40.002Z,1513216360.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:40.017Z,1513216360.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:40.406Z,1513216360.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:40.427Z,1513216360.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:40.803Z,1513216360.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:40.817Z,1513216360.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:41.246Z,1513216361.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:41.301Z,1513216361.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:41.610Z,1513216361.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:41.624Z,1513216361.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:41.992Z,1513216361.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:42.034Z,1513216362.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:42.392Z,1513216362.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:42.423Z,1513216362.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:45.901Z,1513216365.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:45.952Z,1513216365.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:46.072Z,1513216366.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:46.107Z,1513216366.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:46.437Z,1513216366.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:46.453Z,1513216366.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:46.880Z,1513216366.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:46.930Z,1513216366.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:47.229Z,1513216367.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:47.251Z,1513216367.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:47.631Z,1513216367.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:47.651Z,1513216367.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:48.032Z,1513216368.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:48.046Z,1513216368.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:48.450Z,1513216368.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:48.490Z,1513216368.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:48.819Z,1513216368.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:48.917Z,1513216368.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:49.241Z,1513216369.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:49.271Z,1513216369.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:49.633Z,1513216369.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:49.671Z,1513216369.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:50.042Z,1513216370.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:50.074Z,1513216370.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:50.432Z,1513216370.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:50.446Z,1513216370.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:50.846Z,1513216370.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:50.967Z,1513216370.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:51.233Z,1513216371.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:51.248Z,1513216371.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:51.649Z,1513216371.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:51.692Z,1513216371.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:52.038Z,1513216372.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:52.053Z,1513216372.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:52.440Z,1513216372.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:52.456Z,1513216372.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:52.841Z,1513216372.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:52.855Z,1513216372.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:53.220Z,1513216373.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:53.252Z,1513216373.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:53.631Z,1513216373.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:53.654Z,1513216373.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:54.032Z,1513216374.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:54.046Z,1513216374.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:54.139Z,1513216374.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:54.432Z,1513216374.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:54.447Z,1513216374.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:54.876Z,1513216374.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:54.899Z,1513216374.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:54.934Z,1513216374.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:55.267Z,1513216375.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:55.300Z,1513216375.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:55.647Z,1513216375.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:55.667Z,1513216375.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:56.040Z,1513216376.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:56.055Z,1513216376.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:56.419Z,1513216376.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:56.455Z,1513216376.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:56.823Z,1513216376.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:56.848Z,1513216376.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:57.259Z,1513216377.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:57.349Z,1513216377.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:57.620Z,1513216377.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:57.650Z,1513216377.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:58.048Z,1513216378.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:58.075Z,1513216378.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:58.435Z,1513216378.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:58.487Z,1513216378.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:58.877Z,1513216378.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:58.932Z,1513216378.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:59.224Z,1513216379.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:59.271Z,1513216379.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:52:59.631Z,1513216379.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:52:59.667Z,1513216379.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:00.025Z,1513216380.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:00.040Z,1513216380.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:00.426Z,1513216380.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:00.447Z,1513216380.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:00.841Z,1513216380.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:00.909Z,1513216380.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:01.256Z,1513216381.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:01.287Z,1513216381.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:01.637Z,1513216381.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:01.651Z,1513216381.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:02.037Z,1513216382.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:02.052Z,1513216382.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:02.430Z,1513216382.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:02.445Z,1513216382.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:02.821Z,1513216382.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:02.945Z,1513216382.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:03.227Z,1513216383.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:03.294Z,1513216383.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:03.628Z,1513216383.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:03.647Z,1513216383.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:04.038Z,1513216384.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:04.053Z,1513216384.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:04.458Z,1513216384.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:04.499Z,1513216384.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:04.884Z,1513216384.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:04.912Z,1513216384.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:05.218Z,1513216385.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:05.243Z,1513216385.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:05.629Z,1513216385.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:05.645Z,1513216385.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:06.027Z,1513216386.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:06.041Z,1513216386.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:06.434Z,1513216386.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:06.448Z,1513216386.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:06.828Z,1513216386.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:06.844Z,1513216386.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:07.246Z,1513216387.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:07.261Z,1513216387.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:07.670Z,1513216387.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:07.731Z,1513216387.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:08.046Z,1513216388.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:08.112Z,1513216388.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:08.433Z,1513216388.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:08.449Z,1513216388.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:08.832Z,1513216388.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:08.847Z,1513216388.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:09.262Z,1513216389.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:09.298Z,1513216389.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:09.619Z,1513216389.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:09.647Z,1513216389.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:10.041Z,1513216390.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:10.057Z,1513216390.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:10.444Z,1513216390.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:10.463Z,1513216390.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:10.867Z,1513216390.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:10.891Z,1513216390.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:11.255Z,1513216391.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:11.295Z,1513216391.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:11.632Z,1513216391.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:11.665Z,1513216391.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:12.024Z,1513216392.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:12.038Z,1513216392.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:12.424Z,1513216392.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:12.439Z,1513216392.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:12.837Z,1513216392.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:12.923Z,1513216392.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:13.237Z,1513216393.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:13.311Z,1513216393.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:13.642Z,1513216393.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:13.656Z,1513216393.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:14.070Z,1513216394.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:14.111Z,1513216394.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:14.419Z,1513216394.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:14.455Z,1513216394.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:14.860Z,1513216394.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:14.924Z,1513216394.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:15.228Z,1513216395.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:15.243Z,1513216395.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:15.646Z,1513216395.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:16.072Z,1513216396.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:16.475Z,1513216396.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:16.882Z,1513216396.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:16.919Z,1513216396.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:17.229Z,1513216397.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:17.244Z,1513216397.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:17.628Z,1513216397.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:17.643Z,1513216397.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:18.033Z,1513216398.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:18.048Z,1513216398.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:18.430Z,1513216398.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:18.475Z,1513216398.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:18.820Z,1513216398.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:18.915Z,1513216398.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:19.248Z,1513216399.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:19.268Z,1513216399.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:19.649Z,1513216399.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:19.715Z,1513216399.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:20.030Z,1513216400.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:20.067Z,1513216400.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:20.459Z,1513216400.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:20.519Z,1513216400.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:20.826Z,1513216400.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:20.858Z,1513216400.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:21.224Z,1513216401.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:21.243Z,1513216401.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:21.626Z,1513216401.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:21.641Z,1513216401.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:22.034Z,1513216402.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:22.055Z,1513216402.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:22.439Z,1513216402.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:22.454Z,1513216402.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:22.454Z,1513216402.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2017-12-14T01:53:22.454Z,1513216402.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:53:22.488Z,1513216402.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:53:22.837Z,1513216402.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:22.852Z,1513216402.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:22.852Z,1513216402.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2017-12-14T01:53:22.853Z,1513216402.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:53:22.854Z,1513216402.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:22.855Z,1513216402.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2017-12-14T01:53:22.855Z,1513216402.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:53:22.893Z,1513216402.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:53:22.893Z,1513216402.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2017-12-14T01:53:22.894Z,1513216402.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:53:22.894Z,1513216402.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:53:23.266Z,1513216403.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:23.300Z,1513216403.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:53:23.304Z,1513216403.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:53:23.304Z,1513216403.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:53:23.316Z,1513216403.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:53:23.316Z,1513216403.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2017-12-14T01:53:23.325Z,1513216403.325 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:53:23.325Z,1513216403.325 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2017-12-14T01:53:23.642Z,1513216403.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:23.683Z,1513216403.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:23.683Z,1513216403.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:53:23.684Z,1513216403.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:53:23.684Z,1513216403.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:53:23.684Z,1513216403.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:53:23.693Z,1513216403.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:53:23.693Z,1513216403.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:53:24.019Z,1513216404.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:24.056Z,1513216404.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:24.425Z,1513216404.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:24.452Z,1513216404.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:24.827Z,1513216404.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:24.859Z,1513216404.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:25.314Z,1513216405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:25.658Z,1513216405.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:26.100Z,1513216406.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:26.455Z,1513216406.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:26.955Z,1513216406.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:27.252Z,1513216407.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:27.647Z,1513216407.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:28.044Z,1513216408.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:28.473Z,1513216408.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:28.877Z,1513216408.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:28.935Z,1513216408.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:29.222Z,1513216409.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:29.237Z,1513216409.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:29.626Z,1513216409.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:29.642Z,1513216409.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:30.028Z,1513216410.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:30.042Z,1513216410.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:30.424Z,1513216410.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:30.454Z,1513216410.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:30.868Z,1513216410.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:30.923Z,1513216410.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:31.238Z,1513216411.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:31.265Z,1513216411.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:31.638Z,1513216411.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:31.665Z,1513216411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:32.040Z,1513216412.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:32.055Z,1513216412.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:32.429Z,1513216412.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:32.443Z,1513216412.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:32.820Z,1513216412.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:32.908Z,1513216412.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:33.258Z,1513216413.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:33.301Z,1513216413.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:33.619Z,1513216413.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:33.664Z,1513216413.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:34.029Z,1513216414.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:34.057Z,1513216414.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:34.433Z,1513216414.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:34.467Z,1513216414.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:34.828Z,1513216414.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:34.859Z,1513216414.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:35.223Z,1513216415.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:35.248Z,1513216415.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:35.631Z,1513216415.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:35.646Z,1513216415.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:36.029Z,1513216416.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:36.044Z,1513216416.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:36.443Z,1513216416.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:36.472Z,1513216416.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:36.839Z,1513216416.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:36.854Z,1513216416.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:37.266Z,1513216417.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:37.351Z,1513216417.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:37.641Z,1513216417.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:37.675Z,1513216417.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:38.038Z,1513216418.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:38.062Z,1513216418.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:38.427Z,1513216418.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:38.442Z,1513216418.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:38.824Z,1513216418.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:38.840Z,1513216418.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:39.259Z,1513216419.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:39.298Z,1513216419.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:39.646Z,1513216419.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:39.720Z,1513216419.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:40.042Z,1513216420.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:40.075Z,1513216420.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:40.439Z,1513216420.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:40.465Z,1513216420.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:40.877Z,1513216420.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:40.945Z,1513216420.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:41.222Z,1513216421.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:41.252Z,1513216421.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:41.630Z,1513216421.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:41.646Z,1513216421.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:42.030Z,1513216422.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:42.075Z,1513216422.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:42.431Z,1513216422.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:42.448Z,1513216422.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:46.015Z,1513216426.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:46.055Z,1513216426.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:46.171Z,1513216426.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:46.203Z,1513216426.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:46.554Z,1513216426.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:53:46.579Z,1513216426.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:46.970Z,1513216426.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:47.377Z,1513216427.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:47.779Z,1513216427.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:48.230Z,1513216428.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:48.555Z,1513216428.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:49.000Z,1513216429.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:49.395Z,1513216429.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:49.759Z,1513216429.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:50.153Z,1513216430.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:50.555Z,1513216430.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:50.977Z,1513216430.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:51.365Z,1513216431.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:51.759Z,1513216431.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:52.166Z,1513216432.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:52.626Z,1513216432.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:52.971Z,1513216432.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:53.369Z,1513216433.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:53.755Z,1513216433.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:54.196Z,1513216434.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:54.563Z,1513216434.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:54.986Z,1513216434.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:55.371Z,1513216435.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:55.807Z,1513216435.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:56.167Z,1513216436.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:56.555Z,1513216436.555 [PNI_TCM](ERROR): CRC does not match. Expected:0x53969 got:0x56197
2017-12-14T01:53:56.586Z,1513216436.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:56.965Z,1513216436.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:57.364Z,1513216437.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:57.752Z,1513216437.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:58.166Z,1513216438.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:58.567Z,1513216438.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:59.013Z,1513216439.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:59.371Z,1513216439.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:53:59.758Z,1513216439.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:00.126Z,1513216440.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:00.165Z,1513216440.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:00.528Z,1513216440.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:00.578Z,1513216440.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:00.932Z,1513216440.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:00.980Z,1513216440.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:01.355Z,1513216441.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:01.370Z,1513216441.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:01.743Z,1513216441.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:01.765Z,1513216441.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:02.168Z,1513216442.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:02.205Z,1513216442.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:02.534Z,1513216442.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:02.578Z,1513216442.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:02.967Z,1513216442.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:02.982Z,1513216442.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T01:54:03.015Z,1513216443.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:03.339Z,1513216443.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:03.375Z,1513216443.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:03.732Z,1513216443.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:03.777Z,1513216443.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:04.138Z,1513216444.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:04.160Z,1513216444.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:04.545Z,1513216444.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:04.560Z,1513216444.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:04.947Z,1513216444.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:04.996Z,1513216444.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:05.352Z,1513216445.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:05.394Z,1513216445.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:05.724Z,1513216445.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:05.784Z,1513216445.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:06.150Z,1513216446.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x48428 got:0x7490
2017-12-14T01:54:06.206Z,1513216446.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:06.560Z,1513216446.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:06.993Z,1513216446.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:07.356Z,1513216447.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:07.370Z,1513216447.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:07.752Z,1513216447.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:07.802Z,1513216447.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:08.149Z,1513216448.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:08.163Z,1513216448.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:08.563Z,1513216448.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:08.600Z,1513216448.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:08.925Z,1513216448.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:08.963Z,1513216448.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:09.329Z,1513216449.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:09.363Z,1513216449.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:09.729Z,1513216449.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:09.757Z,1513216449.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:10.155Z,1513216450.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:10.174Z,1513216450.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:10.559Z,1513216450.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:10.573Z,1513216450.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:10.956Z,1513216450.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:10.975Z,1513216450.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:11.332Z,1513216451.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:11.359Z,1513216451.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:11.746Z,1513216451.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:11.783Z,1513216451.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:12.125Z,1513216452.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:12.168Z,1513216452.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:12.530Z,1513216452.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:12.571Z,1513216452.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:12.931Z,1513216452.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:12.973Z,1513216452.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:13.338Z,1513216453.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:13.380Z,1513216453.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:13.758Z,1513216453.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:13.773Z,1513216453.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:14.147Z,1513216454.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:14.168Z,1513216454.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:14.535Z,1513216454.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:14.571Z,1513216454.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:14.925Z,1513216454.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:15.010Z,1513216455.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:15.330Z,1513216455.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:15.370Z,1513216455.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:15.728Z,1513216455.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:15.770Z,1513216455.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:16.143Z,1513216456.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:16.206Z,1513216456.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:16.545Z,1513216456.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:16.575Z,1513216456.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:17.072Z,1513216457.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:17.118Z,1513216457.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:17.329Z,1513216457.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:17.367Z,1513216457.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:17.736Z,1513216457.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:17.751Z,1513216457.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:18.167Z,1513216458.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:18.193Z,1513216458.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:18.532Z,1513216458.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:18.577Z,1513216458.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:18.934Z,1513216458.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:18.953Z,1513216458.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:19.357Z,1513216459.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:19.387Z,1513216459.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:19.738Z,1513216459.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:19.778Z,1513216459.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:20.134Z,1513216460.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:20.159Z,1513216460.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:20.525Z,1513216460.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:20.546Z,1513216460.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:20.932Z,1513216460.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:20.959Z,1513216460.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:21.394Z,1513216461.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:21.434Z,1513216461.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:21.733Z,1513216461.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:21.759Z,1513216461.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:22.149Z,1513216462.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:22.164Z,1513216462.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:22.551Z,1513216462.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:22.566Z,1513216462.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:22.946Z,1513216462.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:22.976Z,1513216462.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:23.335Z,1513216463.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:23.371Z,1513216463.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:23.741Z,1513216463.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:23.753Z,1513216463.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x65283 got:0x6977
2017-12-14T01:54:23.792Z,1513216463.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:24.142Z,1513216464.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:24.156Z,1513216464.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:24.562Z,1513216464.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:24.602Z,1513216464.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:24.925Z,1513216464.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:24.973Z,1513216464.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:25.356Z,1513216465.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:25.375Z,1513216465.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:25.751Z,1513216465.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:25.766Z,1513216465.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:26.141Z,1513216466.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:26.175Z,1513216466.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:26.524Z,1513216466.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:26.562Z,1513216466.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:26.926Z,1513216466.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:26.977Z,1513216466.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:27.330Z,1513216467.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:27.387Z,1513216467.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:27.742Z,1513216467.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:27.818Z,1513216467.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:28.137Z,1513216468.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:28.195Z,1513216468.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:28.546Z,1513216468.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:28.569Z,1513216468.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:28.944Z,1513216468.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:28.995Z,1513216468.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:29.329Z,1513216469.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:29.382Z,1513216469.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:29.731Z,1513216469.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:29.791Z,1513216469.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:30.127Z,1513216470.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:30.174Z,1513216470.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:30.535Z,1513216470.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:30.566Z,1513216470.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:30.982Z,1513216470.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:31.048Z,1513216471.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:31.364Z,1513216471.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:31.379Z,1513216471.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:31.754Z,1513216471.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:31.774Z,1513216471.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:32.143Z,1513216472.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:32.172Z,1513216472.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:32.526Z,1513216472.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:32.569Z,1513216472.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:32.929Z,1513216472.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:32.959Z,1513216472.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:33.330Z,1513216473.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:33.417Z,1513216473.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:33.735Z,1513216473.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:33.771Z,1513216473.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:34.139Z,1513216474.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:34.211Z,1513216474.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:34.565Z,1513216474.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:34.587Z,1513216474.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:34.929Z,1513216474.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:34.966Z,1513216474.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:35.338Z,1513216475.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:35.369Z,1513216475.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:35.730Z,1513216475.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:35.779Z,1513216475.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:36.129Z,1513216476.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:36.172Z,1513216476.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:36.529Z,1513216476.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:36.573Z,1513216476.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:36.938Z,1513216476.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:36.978Z,1513216476.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:37.370Z,1513216477.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:37.395Z,1513216477.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:37.751Z,1513216477.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:37.766Z,1513216477.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:38.150Z,1513216478.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:38.188Z,1513216478.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:38.544Z,1513216478.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:38.558Z,1513216478.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:38.941Z,1513216478.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:38.989Z,1513216478.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:39.324Z,1513216479.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:39.362Z,1513216479.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:39.723Z,1513216479.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:39.765Z,1513216479.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:40.150Z,1513216480.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:40.165Z,1513216480.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:40.577Z,1513216480.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:40.607Z,1513216480.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:40.953Z,1513216480.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:40.968Z,1513216480.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:41.327Z,1513216481.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:41.360Z,1513216481.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:41.728Z,1513216481.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:41.755Z,1513216481.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:42.131Z,1513216482.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:42.168Z,1513216482.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:42.530Z,1513216482.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:42.564Z,1513216482.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:46.092Z,1513216486.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:46.108Z,1513216486.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:46.222Z,1513216486.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:46.249Z,1513216486.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:46.577Z,1513216486.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:46.608Z,1513216486.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:47.002Z,1513216487.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:47.032Z,1513216487.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:47.378Z,1513216487.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:47.392Z,1513216487.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:47.769Z,1513216487.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:47.784Z,1513216487.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:48.172Z,1513216488.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:48.187Z,1513216488.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:48.562Z,1513216488.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:48.593Z,1513216488.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:49.020Z,1513216489.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:49.084Z,1513216489.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:49.382Z,1513216489.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:49.446Z,1513216489.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:49.779Z,1513216489.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:49.794Z,1513216489.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:50.205Z,1513216490.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:50.295Z,1513216490.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:50.569Z,1513216490.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:50.604Z,1513216490.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:50.972Z,1513216490.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:51.003Z,1513216491.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:51.366Z,1513216491.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:51.419Z,1513216491.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:51.763Z,1513216491.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:51.804Z,1513216491.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:52.165Z,1513216492.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:52.215Z,1513216492.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:52.578Z,1513216492.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:52.611Z,1513216492.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:52.978Z,1513216492.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:53.011Z,1513216493.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:53.394Z,1513216493.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:53.421Z,1513216493.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:53.772Z,1513216493.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:53.796Z,1513216493.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:54.166Z,1513216494.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:54.180Z,1513216494.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:54.567Z,1513216494.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:54.582Z,1513216494.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:54.977Z,1513216494.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:55.026Z,1513216495.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:55.386Z,1513216495.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:55.412Z,1513216495.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:55.774Z,1513216495.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:55.805Z,1513216495.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:56.165Z,1513216496.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:56.187Z,1513216496.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:56.596Z,1513216496.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:56.638Z,1513216496.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:56.970Z,1513216496.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:56.985Z,1513216496.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:57.416Z,1513216497.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:57.509Z,1513216497.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:57.769Z,1513216497.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:57.783Z,1513216497.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:58.174Z,1513216498.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:58.203Z,1513216498.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:58.585Z,1513216498.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:58.600Z,1513216498.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:58.979Z,1513216498.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:59.020Z,1513216499.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:59.368Z,1513216499.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:59.384Z,1513216499.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:54:59.766Z,1513216499.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:54:59.795Z,1513216499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:00.174Z,1513216500.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:00.189Z,1513216500.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:00.568Z,1513216500.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:00.624Z,1513216500.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:00.978Z,1513216500.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:00.999Z,1513216500.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:01.397Z,1513216501.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:01.424Z,1513216501.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:01.776Z,1513216501.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:01.791Z,1513216501.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:02.167Z,1513216502.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:02.182Z,1513216502.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:02.564Z,1513216502.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:02.579Z,1513216502.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:02.975Z,1513216502.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:02.990Z,1513216502.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:03.375Z,1513216503.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:03.414Z,1513216503.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:03.759Z,1513216503.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:03.791Z,1513216503.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:04.171Z,1513216504.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:04.198Z,1513216504.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:04.584Z,1513216504.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:04.599Z,1513216504.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:04.979Z,1513216504.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:04.999Z,1513216504.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:05.359Z,1513216505.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:05.391Z,1513216505.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:05.763Z,1513216505.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:05.790Z,1513216505.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:06.160Z,1513216506.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:06.198Z,1513216506.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:06.576Z,1513216506.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:06.614Z,1513216506.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:06.994Z,1513216506.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:07.009Z,1513216507.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:07.378Z,1513216507.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:07.410Z,1513216507.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:07.775Z,1513216507.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:07.807Z,1513216507.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:08.174Z,1513216508.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:08.201Z,1513216508.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:08.564Z,1513216508.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:08.579Z,1513216508.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:08.965Z,1513216508.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:08.980Z,1513216508.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:09.370Z,1513216509.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:09.391Z,1513216509.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:09.816Z,1513216509.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:09.844Z,1513216509.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:10.171Z,1513216510.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:10.191Z,1513216510.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:10.574Z,1513216510.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:10.582Z,1513216510.582 [BPC1](ERROR): Failed to parse message.
2017-12-14T01:55:10.582Z,1513216510.582 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:55:10.583Z,1513216510.583 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:55:10.583Z,1513216510.583 [BPC1](ERROR): Data Fault
2017-12-14T01:55:10.591Z,1513216510.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:10.637Z,1513216510.637 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:55:10.998Z,1513216510.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:11.115Z,1513216511.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:11.373Z,1513216511.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:11.389Z,1513216511.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:11.770Z,1513216511.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:11.786Z,1513216511.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:11.799Z,1513216511.799 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:55:11.799Z,1513216511.799 [BPC1] No Fault, FailCount= 1
2017-12-14T01:55:12.174Z,1513216512.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:12.231Z,1513216512.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:12.571Z,1513216512.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:12.593Z,1513216512.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:13.024Z,1513216513.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:13.072Z,1513216513.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:13.379Z,1513216513.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:13.399Z,1513216513.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:13.773Z,1513216513.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:13.788Z,1513216513.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:14.166Z,1513216514.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:14.195Z,1513216514.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:14.575Z,1513216514.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:14.589Z,1513216514.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:14.974Z,1513216514.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:14.988Z,1513216514.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:15.371Z,1513216515.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:15.391Z,1513216515.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:15.776Z,1513216515.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:15.799Z,1513216515.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:16.184Z,1513216516.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:16.226Z,1513216516.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:16.581Z,1513216516.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:16.620Z,1513216516.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:16.978Z,1513216516.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:16.993Z,1513216516.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:17.366Z,1513216517.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:17.396Z,1513216517.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:17.760Z,1513216517.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:17.795Z,1513216517.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:18.160Z,1513216518.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:18.187Z,1513216518.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:18.571Z,1513216518.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:18.591Z,1513216518.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:18.976Z,1513216518.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:18.992Z,1513216518.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:19.378Z,1513216519.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:19.409Z,1513216519.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:19.778Z,1513216519.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:19.799Z,1513216519.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:20.167Z,1513216520.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:20.203Z,1513216520.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:20.566Z,1513216520.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:20.608Z,1513216520.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:20.967Z,1513216520.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:20.987Z,1513216520.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:21.364Z,1513216521.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:21.379Z,1513216521.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:21.759Z,1513216521.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:21.785Z,1513216521.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:22.176Z,1513216522.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:22.191Z,1513216522.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:22.615Z,1513216522.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:22.634Z,1513216522.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:22.979Z,1513216522.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:22.999Z,1513216522.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:23.369Z,1513216523.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:23.384Z,1513216523.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:23.762Z,1513216523.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:23.799Z,1513216523.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:24.173Z,1513216524.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:24.187Z,1513216524.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:24.557Z,1513216524.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:24.583Z,1513216524.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:24.986Z,1513216524.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:25.007Z,1513216525.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:25.386Z,1513216525.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:25.407Z,1513216525.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:25.790Z,1513216525.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:25.829Z,1513216525.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:26.159Z,1513216526.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:26.184Z,1513216526.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:26.563Z,1513216526.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:26.588Z,1513216526.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:26.989Z,1513216526.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:27.012Z,1513216527.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:27.364Z,1513216527.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:27.395Z,1513216527.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:27.788Z,1513216527.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:27.807Z,1513216527.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:28.190Z,1513216528.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:28.211Z,1513216528.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:28.580Z,1513216528.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:28.597Z,1513216528.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:28.988Z,1513216528.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:29.027Z,1513216529.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:29.368Z,1513216529.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:29.399Z,1513216529.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:29.763Z,1513216529.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:29.779Z,1513216529.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:30.175Z,1513216530.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:30.206Z,1513216530.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:30.583Z,1513216530.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:30.613Z,1513216530.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:30.978Z,1513216530.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:31.015Z,1513216531.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:31.364Z,1513216531.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:31.383Z,1513216531.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:31.781Z,1513216531.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:31.808Z,1513216531.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:32.199Z,1513216532.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:32.231Z,1513216532.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:32.568Z,1513216532.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:32.659Z,1513216532.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:32.965Z,1513216532.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:32.996Z,1513216532.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:33.372Z,1513216533.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:33.401Z,1513216533.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:33.766Z,1513216533.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:33.804Z,1513216533.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:34.165Z,1513216534.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:34.180Z,1513216534.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:34.561Z,1513216534.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:34.607Z,1513216534.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:34.969Z,1513216534.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:34.983Z,1513216534.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:35.408Z,1513216535.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:35.432Z,1513216535.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:35.764Z,1513216535.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:35.783Z,1513216535.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:36.177Z,1513216536.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:36.209Z,1513216536.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:36.577Z,1513216536.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:36.606Z,1513216536.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:36.971Z,1513216536.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:36.987Z,1513216536.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:37.367Z,1513216537.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:37.386Z,1513216537.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:37.764Z,1513216537.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:37.779Z,1513216537.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:38.171Z,1513216538.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:38.185Z,1513216538.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:38.602Z,1513216538.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:38.639Z,1513216538.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:38.970Z,1513216538.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:38.984Z,1513216538.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:39.378Z,1513216539.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:39.408Z,1513216539.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:39.772Z,1513216539.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:39.788Z,1513216539.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:40.163Z,1513216540.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:40.182Z,1513216540.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:40.568Z,1513216540.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:40.582Z,1513216540.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:40.977Z,1513216540.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:41.014Z,1513216541.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:41.366Z,1513216541.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:41.393Z,1513216541.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:41.809Z,1513216541.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:41.839Z,1513216541.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:42.178Z,1513216542.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:42.196Z,1513216542.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:42.578Z,1513216542.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:42.592Z,1513216542.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:46.090Z,1513216546.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:46.136Z,1513216546.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:46.232Z,1513216546.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:46.250Z,1513216546.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:46.592Z,1513216546.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:46.627Z,1513216546.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:46.988Z,1513216546.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:47.003Z,1513216547.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:47.384Z,1513216547.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:47.399Z,1513216547.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:47.805Z,1513216547.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:47.836Z,1513216547.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:48.203Z,1513216548.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:48.239Z,1513216548.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:48.598Z,1513216548.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:48.628Z,1513216548.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:48.994Z,1513216548.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:49.008Z,1513216549.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:49.384Z,1513216549.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:49.404Z,1513216549.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:49.802Z,1513216549.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:49.831Z,1513216549.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:50.205Z,1513216550.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:50.230Z,1513216550.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:50.593Z,1513216550.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:50.633Z,1513216550.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:50.994Z,1513216550.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:51.009Z,1513216551.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:51.391Z,1513216551.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:51.415Z,1513216551.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:51.802Z,1513216551.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:51.817Z,1513216551.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:52.197Z,1513216552.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:52.212Z,1513216552.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:52.609Z,1513216552.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:52.642Z,1513216552.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:52.995Z,1513216552.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:53.015Z,1513216553.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:53.393Z,1513216553.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:53.415Z,1513216553.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:53.798Z,1513216553.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:53.819Z,1513216553.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:54.210Z,1513216554.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:54.239Z,1513216554.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:54.613Z,1513216554.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:54.663Z,1513216554.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:54.992Z,1513216554.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:55.013Z,1513216555.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:55.398Z,1513216555.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:55.414Z,1513216555.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:55.802Z,1513216555.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:55.818Z,1513216555.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:56.202Z,1513216556.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:56.223Z,1513216556.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:56.603Z,1513216556.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:56.620Z,1513216556.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:56.990Z,1513216556.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:57.010Z,1513216557.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:57.395Z,1513216557.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:57.415Z,1513216557.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:57.842Z,1513216557.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:57.867Z,1513216557.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:58.210Z,1513216558.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:58.262Z,1513216558.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:58.608Z,1513216558.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:58.652Z,1513216558.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:58.999Z,1513216558.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:59.015Z,1513216559.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:59.387Z,1513216559.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:59.450Z,1513216559.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:55:59.806Z,1513216559.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:55:59.821Z,1513216559.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:00.211Z,1513216560.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:00.260Z,1513216560.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:00.611Z,1513216560.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:00.626Z,1513216560.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:01.017Z,1513216561.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:01.079Z,1513216561.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:01.383Z,1513216561.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:01.419Z,1513216561.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:01.802Z,1513216561.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:01.816Z,1513216561.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:02.212Z,1513216562.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:02.226Z,1513216562.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:02.612Z,1513216562.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:02.631Z,1513216562.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:03.005Z,1513216563.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:03.020Z,1513216563.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:03.384Z,1513216563.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:03.415Z,1513216563.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:03.813Z,1513216563.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:03.828Z,1513216563.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:04.261Z,1513216564.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:04.287Z,1513216564.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:04.594Z,1513216564.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:04.621Z,1513216564.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:04.984Z,1513216564.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:04.999Z,1513216564.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:05.396Z,1513216565.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:05.423Z,1513216565.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:05.801Z,1513216565.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:05.835Z,1513216565.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:06.207Z,1513216566.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:06.232Z,1513216566.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:06.602Z,1513216566.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:06.627Z,1513216566.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:06.995Z,1513216566.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:07.032Z,1513216567.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:07.418Z,1513216567.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:07.446Z,1513216567.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:07.806Z,1513216567.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:07.836Z,1513216567.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:08.202Z,1513216568.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:08.216Z,1513216568.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:08.611Z,1513216568.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:08.667Z,1513216568.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:08.995Z,1513216568.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:09.015Z,1513216569.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:09.395Z,1513216569.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:09.410Z,1513216569.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:09.794Z,1513216569.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:09.810Z,1513216569.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:10.206Z,1513216570.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:10.237Z,1513216570.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:10.622Z,1513216570.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:10.653Z,1513216570.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:11.002Z,1513216571.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:11.018Z,1513216571.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:11.386Z,1513216571.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:11.410Z,1513216571.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:11.802Z,1513216571.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:11.816Z,1513216571.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:12.199Z,1513216572.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:12.214Z,1513216572.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:12.595Z,1513216572.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:12.615Z,1513216572.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:12.970Z,1513216572.970 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T01:56:12.970Z,1513216572.970 [NAL9602] Data Fault, FailCount= 3
2017-12-14T01:56:12.970Z,1513216572.970 [NAL9602](ERROR): Data Fault
2017-12-14T01:56:13.005Z,1513216573.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:13.041Z,1513216573.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:13.054Z,1513216573.054 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T01:56:13.370Z,1513216573.370 [NAL9602](INFO): Powering down
2017-12-14T01:56:13.399Z,1513216573.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:13.427Z,1513216573.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:13.841Z,1513216573.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:13.867Z,1513216573.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:14.182Z,1513216574.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:14.218Z,1513216574.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:14.231Z,1513216574.231 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T01:56:14.231Z,1513216574.231 [NAL9602] No Fault, FailCount= 3
2017-12-14T01:56:14.581Z,1513216574.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:14.612Z,1513216574.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:14.987Z,1513216574.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:15.014Z,1513216575.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:15.382Z,1513216575.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:15.415Z,1513216575.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:15.781Z,1513216575.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:15.820Z,1513216575.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:16.182Z,1513216576.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:16.213Z,1513216576.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:16.588Z,1513216576.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:16.623Z,1513216576.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:17.038Z,1513216577.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:17.081Z,1513216577.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:17.396Z,1513216577.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:17.425Z,1513216577.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:17.790Z,1513216577.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:17.825Z,1513216577.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:18.194Z,1513216578.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:18.227Z,1513216578.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:18.587Z,1513216578.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:18.606Z,1513216578.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:18.992Z,1513216578.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:19.011Z,1513216579.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:19.394Z,1513216579.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:19.409Z,1513216579.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:19.813Z,1513216579.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:19.843Z,1513216579.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:20.236Z,1513216580.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:20.299Z,1513216580.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:20.592Z,1513216580.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:20.695Z,1513216580.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:20.993Z,1513216580.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:21.012Z,1513216581.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:21.402Z,1513216581.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:21.417Z,1513216581.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:21.793Z,1513216581.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:21.831Z,1513216581.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:22.192Z,1513216582.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:22.211Z,1513216582.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:22.584Z,1513216582.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:22.668Z,1513216582.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:22.988Z,1513216582.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:23.066Z,1513216583.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:23.385Z,1513216583.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:23.424Z,1513216583.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:23.424Z,1513216583.424 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2017-12-14T01:56:23.433Z,1513216583.433 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:56:23.574Z,1513216583.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:56:23.785Z,1513216583.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:23.830Z,1513216583.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:23.831Z,1513216583.831 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2017-12-14T01:56:23.831Z,1513216583.831 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:56:23.833Z,1513216583.833 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:23.833Z,1513216583.833 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2017-12-14T01:56:23.833Z,1513216583.833 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:56:23.908Z,1513216583.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:56:23.908Z,1513216583.908 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2017-12-14T01:56:23.910Z,1513216583.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:56:23.910Z,1513216583.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:56:24.193Z,1513216584.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:24.256Z,1513216584.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:56:24.256Z,1513216584.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:56:24.256Z,1513216584.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:56:24.268Z,1513216584.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:56:24.268Z,1513216584.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2017-12-14T01:56:24.269Z,1513216584.269 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:56:24.269Z,1513216584.269 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2017-12-14T01:56:24.603Z,1513216584.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:24.628Z,1513216584.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:24.628Z,1513216584.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:56:24.649Z,1513216584.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:56:24.649Z,1513216584.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:56:24.650Z,1513216584.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:56:24.650Z,1513216584.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:56:24.650Z,1513216584.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:56:24.991Z,1513216584.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:25.046Z,1513216585.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:25.397Z,1513216585.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:25.451Z,1513216585.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:25.788Z,1513216585.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:25.839Z,1513216585.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:26.201Z,1513216586.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:26.247Z,1513216586.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:26.589Z,1513216586.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:26.603Z,1513216586.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:27.025Z,1513216587.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:27.052Z,1513216587.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:27.417Z,1513216587.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:27.431Z,1513216587.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:27.801Z,1513216587.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:27.832Z,1513216587.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:28.202Z,1513216588.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:28.228Z,1513216588.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:28.583Z,1513216588.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:28.640Z,1513216588.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:28.992Z,1513216588.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:29.006Z,1513216589.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:29.396Z,1513216589.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:29.412Z,1513216589.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:29.791Z,1513216589.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:29.842Z,1513216589.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:30.192Z,1513216590.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:30.206Z,1513216590.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:30.585Z,1513216590.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:30.637Z,1513216590.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:30.990Z,1513216590.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:31.053Z,1513216591.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:31.408Z,1513216591.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:31.458Z,1513216591.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:31.814Z,1513216591.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:31.862Z,1513216591.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:32.184Z,1513216592.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:32.251Z,1513216592.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:32.606Z,1513216592.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:32.666Z,1513216592.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:33.003Z,1513216593.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:33.031Z,1513216593.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:33.421Z,1513216593.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:33.480Z,1513216593.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:33.785Z,1513216593.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:33.808Z,1513216593.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:34.196Z,1513216594.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:34.220Z,1513216594.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:34.584Z,1513216594.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:34.618Z,1513216594.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:34.984Z,1513216594.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:35.021Z,1513216595.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:35.385Z,1513216595.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:35.468Z,1513216595.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:35.811Z,1513216595.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:35.834Z,1513216595.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:36.183Z,1513216596.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:36.210Z,1513216596.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:36.587Z,1513216596.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:36.613Z,1513216596.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:36.982Z,1513216596.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:37.007Z,1513216597.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:37.398Z,1513216597.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:37.418Z,1513216597.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:37.788Z,1513216597.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:37.814Z,1513216597.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:38.182Z,1513216598.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:38.215Z,1513216598.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:38.586Z,1513216598.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:38.611Z,1513216598.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:38.988Z,1513216598.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:39.014Z,1513216599.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:39.383Z,1513216599.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:39.409Z,1513216599.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:39.783Z,1513216599.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:39.815Z,1513216599.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:40.189Z,1513216600.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:40.223Z,1513216600.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:40.594Z,1513216600.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:40.625Z,1513216600.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:40.984Z,1513216600.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:40.999Z,1513216600.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:41.389Z,1513216601.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:41.436Z,1513216601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:41.789Z,1513216601.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:41.803Z,1513216601.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:42.193Z,1513216602.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:42.279Z,1513216602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:42.282Z,1513216602.282 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T01:56:42.282Z,1513216602.282 [Default:CheckIn:C.Wait] Stopped
2017-12-14T01:56:42.282Z,1513216602.282 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T01:56:42.283Z,1513216602.283 [Default:CheckIn:D] Running Loop=1
2017-12-14T01:56:42.589Z,1513216602.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:42.605Z,1513216602.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:42.608Z,1513216602.608 [Default:CheckIn:D] Stopped
2017-12-14T01:56:42.608Z,1513216602.608 [Default:CheckIn:E] Running Loop=1
2017-12-14T01:56:46.158Z,1513216606.158 [NAL9602](INFO): Powering up NAL9602
2017-12-14T01:56:46.199Z,1513216606.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:46.303Z,1513216606.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:46.307Z,1513216606.307 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.453638 min 
2017-12-14T01:56:46.307Z,1513216606.307 [Default:CheckIn:E] Stopped
2017-12-14T01:56:46.307Z,1513216606.307 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T01:56:46.307Z,1513216606.307 [Default:CheckIn] Stopped
2017-12-14T01:56:46.308Z,1513216606.308 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T01:56:46.308Z,1513216606.308 [Default:CheckIn](INFO): Running loop #9
2017-12-14T01:56:46.308Z,1513216606.308 [Default:CheckIn] Running Loop=9
2017-12-14T01:56:46.308Z,1513216606.308 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T01:56:46.308Z,1513216606.308 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T01:56:46.411Z,1513216606.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:46.467Z,1513216606.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:46.778Z,1513216606.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:46.891Z,1513216606.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:47.196Z,1513216607.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:47.211Z,1513216607.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:47.598Z,1513216607.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:47.652Z,1513216607.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:47.979Z,1513216607.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:48.015Z,1513216608.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:48.373Z,1513216608.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:48.399Z,1513216608.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:48.783Z,1513216608.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:48.811Z,1513216608.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:49.179Z,1513216609.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:49.219Z,1513216609.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:49.580Z,1513216609.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:49.627Z,1513216609.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:49.983Z,1513216609.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:49.999Z,1513216609.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:50.384Z,1513216610.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:50.400Z,1513216610.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:50.786Z,1513216610.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:50.802Z,1513216610.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:51.185Z,1513216611.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:51.201Z,1513216611.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:51.589Z,1513216611.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:51.604Z,1513216611.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:51.982Z,1513216611.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:51.996Z,1513216611.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:52.382Z,1513216612.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:52.403Z,1513216612.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:52.787Z,1513216612.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:52.831Z,1513216612.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:53.230Z,1513216613.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:53.274Z,1513216613.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:53.588Z,1513216613.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:53.615Z,1513216613.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:53.985Z,1513216613.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:53.999Z,1513216613.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:54.383Z,1513216614.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:54.397Z,1513216614.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:54.786Z,1513216614.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:54.801Z,1513216614.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:55.256Z,1513216615.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:55.279Z,1513216615.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:55.578Z,1513216615.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:55.610Z,1513216615.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:55.982Z,1513216615.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:56.055Z,1513216616.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:56.383Z,1513216616.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:56.407Z,1513216616.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:56.803Z,1513216616.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:56.855Z,1513216616.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:57.162Z,1513216617.162 [NAL9602](INFO): NAL9602 initialized
2017-12-14T01:56:57.179Z,1513216617.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:57.207Z,1513216617.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:57.579Z,1513216617.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:57.615Z,1513216617.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:57.993Z,1513216617.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:58.028Z,1513216618.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:58.398Z,1513216618.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:58.427Z,1513216618.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:58.798Z,1513216618.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:58.889Z,1513216618.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:59.182Z,1513216619.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:59.235Z,1513216619.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:59.592Z,1513216619.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:56:59.629Z,1513216619.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:56:59.987Z,1513216619.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:00.007Z,1513216620.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:00.450Z,1513216620.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:00.464Z,1513216620.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:00.798Z,1513216620.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:00.859Z,1513216620.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:01.202Z,1513216621.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:01.222Z,1513216621.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:01.580Z,1513216621.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:01.623Z,1513216621.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:01.981Z,1513216621.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:02.020Z,1513216622.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:02.389Z,1513216622.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:02.433Z,1513216622.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:02.797Z,1513216622.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:02.883Z,1513216622.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:03.198Z,1513216623.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:03.212Z,1513216623.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:03.601Z,1513216623.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:03.616Z,1513216623.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:03.991Z,1513216623.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:04.006Z,1513216624.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:04.393Z,1513216624.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:04.408Z,1513216624.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:04.819Z,1513216624.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:04.847Z,1513216624.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:05.186Z,1513216625.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:05.205Z,1513216625.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:05.623Z,1513216625.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:05.651Z,1513216625.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:06.001Z,1513216626.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:06.032Z,1513216626.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:06.398Z,1513216626.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:06.412Z,1513216626.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:06.789Z,1513216626.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:06.804Z,1513216626.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:07.224Z,1513216627.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:07.251Z,1513216627.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:07.579Z,1513216627.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:07.607Z,1513216627.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:07.980Z,1513216627.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:08.058Z,1513216628.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:08.398Z,1513216628.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:08.413Z,1513216628.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:08.812Z,1513216628.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:08.868Z,1513216628.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:09.223Z,1513216629.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:09.247Z,1513216629.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:09.599Z,1513216629.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:09.658Z,1513216629.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:09.990Z,1513216629.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:10.004Z,1513216630.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:10.391Z,1513216630.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:10.423Z,1513216630.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:10.788Z,1513216630.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:10.803Z,1513216630.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:11.190Z,1513216631.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:11.205Z,1513216631.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:11.595Z,1513216631.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:11.610Z,1513216631.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:12.002Z,1513216632.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:12.116Z,1513216632.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:12.393Z,1513216632.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:12.415Z,1513216632.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:12.783Z,1513216632.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:12.797Z,1513216632.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:13.201Z,1513216633.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:13.223Z,1513216633.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:13.579Z,1513216633.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:13.613Z,1513216633.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:13.979Z,1513216633.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:14.014Z,1513216634.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:14.394Z,1513216634.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:14.409Z,1513216634.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:14.803Z,1513216634.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:14.853Z,1513216634.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:15.193Z,1513216635.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:15.228Z,1513216635.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:15.590Z,1513216635.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:15.621Z,1513216635.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:15.983Z,1513216635.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:15.998Z,1513216635.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:16.378Z,1513216636.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:16.393Z,1513216636.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:16.785Z,1513216636.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:16.801Z,1513216636.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:17.179Z,1513216637.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:17.207Z,1513216637.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:17.603Z,1513216637.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:17.618Z,1513216637.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:18.006Z,1513216638.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:18.059Z,1513216638.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:18.418Z,1513216638.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:18.449Z,1513216638.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:18.784Z,1513216638.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:18.814Z,1513216638.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:19.184Z,1513216639.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:19.203Z,1513216639.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:19.586Z,1513216639.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:19.601Z,1513216639.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:19.986Z,1513216639.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:20.001Z,1513216640.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:20.398Z,1513216640.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:20.428Z,1513216640.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:20.798Z,1513216640.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:20.812Z,1513216640.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:21.236Z,1513216641.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:21.268Z,1513216641.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:21.590Z,1513216641.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:21.655Z,1513216641.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:21.987Z,1513216641.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:22.036Z,1513216642.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:22.378Z,1513216642.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:22.393Z,1513216642.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:22.793Z,1513216642.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:22.821Z,1513216642.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:23.254Z,1513216643.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:23.302Z,1513216643.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:23.603Z,1513216643.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:23.617Z,1513216643.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:23.979Z,1513216643.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:24.010Z,1513216644.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:24.379Z,1513216644.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:24.393Z,1513216644.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:24.810Z,1513216644.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:24.902Z,1513216644.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:25.187Z,1513216645.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:25.218Z,1513216645.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:25.595Z,1513216645.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:25.626Z,1513216645.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:25.999Z,1513216645.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:26.027Z,1513216646.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:26.398Z,1513216646.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:26.429Z,1513216646.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:26.786Z,1513216646.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:26.801Z,1513216646.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:27.189Z,1513216647.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:27.204Z,1513216647.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:27.584Z,1513216647.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:27.616Z,1513216647.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:27.980Z,1513216647.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:28.015Z,1513216648.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:28.391Z,1513216648.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:28.427Z,1513216648.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:28.789Z,1513216648.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:28.858Z,1513216648.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:29.197Z,1513216649.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:29.220Z,1513216649.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:29.598Z,1513216649.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:29.624Z,1513216649.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:29.986Z,1513216649.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:30.051Z,1513216650.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:30.385Z,1513216650.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:30.399Z,1513216650.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:30.780Z,1513216650.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:30.894Z,1513216650.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:31.196Z,1513216651.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:31.239Z,1513216651.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:31.602Z,1513216651.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:31.646Z,1513216651.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:32.002Z,1513216652.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:32.019Z,1513216652.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:32.402Z,1513216652.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:32.419Z,1513216652.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:32.788Z,1513216652.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:32.803Z,1513216652.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:33.188Z,1513216653.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:33.208Z,1513216653.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:33.583Z,1513216653.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:33.605Z,1513216653.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:33.990Z,1513216653.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:34.011Z,1513216654.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:34.373Z,1513216654.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:34.416Z,1513216654.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:34.801Z,1513216654.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:34.816Z,1513216654.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:35.260Z,1513216655.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:35.292Z,1513216655.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:35.589Z,1513216655.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:35.620Z,1513216655.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:35.987Z,1513216655.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:36.023Z,1513216656.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:36.385Z,1513216656.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:36.400Z,1513216656.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:36.792Z,1513216656.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:36.806Z,1513216656.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:37.226Z,1513216657.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:37.251Z,1513216657.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:37.595Z,1513216657.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:37.655Z,1513216657.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:37.998Z,1513216657.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:38.079Z,1513216658.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:38.393Z,1513216658.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:38.421Z,1513216658.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:38.785Z,1513216658.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:38.800Z,1513216658.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:39.179Z,1513216659.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:39.218Z,1513216659.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:39.583Z,1513216659.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:39.617Z,1513216659.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:39.979Z,1513216659.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:40.024Z,1513216660.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:40.390Z,1513216660.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:40.419Z,1513216660.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:40.803Z,1513216660.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:40.913Z,1513216660.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:41.193Z,1513216661.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:41.219Z,1513216661.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:41.586Z,1513216661.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:41.617Z,1513216661.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:41.983Z,1513216661.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:42.010Z,1513216662.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:42.397Z,1513216662.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:42.424Z,1513216662.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:42.794Z,1513216662.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:42.862Z,1513216662.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:46.298Z,1513216666.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:46.329Z,1513216666.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:46.445Z,1513216666.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:46.479Z,1513216666.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:46.792Z,1513216666.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:46.831Z,1513216666.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:47.191Z,1513216667.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:47.212Z,1513216667.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:47.579Z,1513216667.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:47.619Z,1513216667.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:47.980Z,1513216667.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:47.999Z,1513216667.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:48.383Z,1513216668.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:48.398Z,1513216668.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:48.794Z,1513216668.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:48.829Z,1513216668.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:49.236Z,1513216669.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:49.290Z,1513216669.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:49.599Z,1513216669.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:49.626Z,1513216669.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:49.983Z,1513216669.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:50.015Z,1513216670.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:50.381Z,1513216670.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:50.424Z,1513216670.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:50.787Z,1513216670.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:50.814Z,1513216670.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:51.251Z,1513216671.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:51.286Z,1513216671.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:51.598Z,1513216671.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:51.680Z,1513216671.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:51.998Z,1513216671.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:52.020Z,1513216672.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:52.394Z,1513216672.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:52.448Z,1513216672.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:52.788Z,1513216672.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:52.803Z,1513216672.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:53.189Z,1513216673.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:53.203Z,1513216673.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:53.611Z,1513216673.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:53.663Z,1513216673.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:53.980Z,1513216673.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:54.015Z,1513216674.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:54.393Z,1513216674.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:54.432Z,1513216674.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:54.794Z,1513216674.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:54.891Z,1513216674.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:55.201Z,1513216675.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:55.234Z,1513216675.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:55.599Z,1513216675.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:55.626Z,1513216675.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:55.980Z,1513216675.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:56.008Z,1513216676.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:56.390Z,1513216676.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:56.405Z,1513216676.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:56.806Z,1513216676.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:56.905Z,1513216676.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:57.186Z,1513216677.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:57.208Z,1513216677.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:57.602Z,1513216677.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:57.635Z,1513216677.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:58.002Z,1513216678.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:58.028Z,1513216678.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:58.390Z,1513216678.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:58.404Z,1513216678.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:58.785Z,1513216678.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:58.800Z,1513216678.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:59.189Z,1513216679.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:59.207Z,1513216679.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:57:59.598Z,1513216679.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:57:59.613Z,1513216679.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:00.091Z,1513216680.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:00.108Z,1513216680.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:00.403Z,1513216680.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:00.418Z,1513216680.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:00.805Z,1513216680.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:00.821Z,1513216680.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:01.189Z,1513216681.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:01.216Z,1513216681.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:01.584Z,1513216681.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:01.623Z,1513216681.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:01.978Z,1513216681.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:01.992Z,1513216681.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:02.397Z,1513216682.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:02.425Z,1513216682.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:02.794Z,1513216682.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:02.844Z,1513216682.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:03.281Z,1513216683.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:03.334Z,1513216683.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:03.589Z,1513216683.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:03.604Z,1513216683.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:03.987Z,1513216683.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:04.010Z,1513216684.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:04.386Z,1513216684.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:04.401Z,1513216684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:04.787Z,1513216684.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:04.803Z,1513216684.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:05.242Z,1513216685.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:05.305Z,1513216685.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:05.602Z,1513216685.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:05.639Z,1513216685.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:06.002Z,1513216686.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:06.032Z,1513216686.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:06.390Z,1513216686.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:06.406Z,1513216686.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:06.779Z,1513216686.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:06.811Z,1513216686.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:07.192Z,1513216687.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:07.206Z,1513216687.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:07.589Z,1513216687.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:07.604Z,1513216687.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:07.984Z,1513216687.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:07.000Z,1513216688.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:08.389Z,1513216688.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:08.403Z,1513216688.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:08.797Z,1513216688.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:08.812Z,1513216688.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:09.194Z,1513216689.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:09.224Z,1513216689.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:09.607Z,1513216689.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:09.639Z,1513216689.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:09.979Z,1513216689.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:10.007Z,1513216690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:10.391Z,1513216690.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:10.406Z,1513216690.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:10.788Z,1513216690.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:10.803Z,1513216690.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:11.182Z,1513216691.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:11.215Z,1513216691.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:11.602Z,1513216691.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:11.619Z,1513216691.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:12.001Z,1513216692.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:12.019Z,1513216692.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:12.402Z,1513216692.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:12.419Z,1513216692.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:12.807Z,1513216692.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:12.902Z,1513216692.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:13.179Z,1513216693.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:13.210Z,1513216693.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:13.579Z,1513216693.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:13.607Z,1513216693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:13.985Z,1513216693.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:14.020Z,1513216694.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:14.379Z,1513216694.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:14.422Z,1513216694.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:14.809Z,1513216694.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:14.944Z,1513216694.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:15.196Z,1513216695.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:15.211Z,1513216695.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:15.598Z,1513216695.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:15.651Z,1513216695.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:15.990Z,1513216695.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:16.004Z,1513216696.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:16.389Z,1513216696.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:16.438Z,1513216696.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:16.782Z,1513216696.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:16.796Z,1513216696.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:17.249Z,1513216697.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:17.284Z,1513216697.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:17.597Z,1513216697.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:17.627Z,1513216697.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:17.997Z,1513216697.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:18.021Z,1513216698.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:18.410Z,1513216698.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:18.431Z,1513216698.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:18.780Z,1513216698.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:18.799Z,1513216698.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:19.237Z,1513216699.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:19.291Z,1513216699.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:19.584Z,1513216699.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:19.619Z,1513216699.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:19.979Z,1513216699.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:20.015Z,1513216700.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:20.397Z,1513216700.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:20.423Z,1513216700.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:20.798Z,1513216700.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:20.892Z,1513216700.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:21.193Z,1513216701.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:21.230Z,1513216701.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:21.587Z,1513216701.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:21.607Z,1513216701.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:22.085Z,1513216702.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:22.131Z,1513216702.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:22.394Z,1513216702.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:22.417Z,1513216702.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:22.807Z,1513216702.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:22.872Z,1513216702.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:23.202Z,1513216703.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:23.227Z,1513216703.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:23.587Z,1513216703.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:23.603Z,1513216703.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:23.989Z,1513216703.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:24.003Z,1513216704.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:24.397Z,1513216704.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:24.432Z,1513216704.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:24.802Z,1513216704.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:24.895Z,1513216704.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:25.200Z,1513216705.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:25.214Z,1513216705.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:25.596Z,1513216705.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:25.615Z,1513216705.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:25.988Z,1513216705.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:26.011Z,1513216706.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:26.419Z,1513216706.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:26.453Z,1513216706.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:26.803Z,1513216706.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:26.818Z,1513216706.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:27.190Z,1513216707.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:27.224Z,1513216707.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:27.585Z,1513216707.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:27.615Z,1513216707.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:27.986Z,1513216707.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:28.000Z,1513216708.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:28.399Z,1513216708.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:28.426Z,1513216708.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:28.801Z,1513216708.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:28.816Z,1513216708.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:29.210Z,1513216709.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:29.257Z,1513216709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:29.591Z,1513216709.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:29.625Z,1513216709.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:29.987Z,1513216709.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:30.002Z,1513216710.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:30.386Z,1513216710.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:30.401Z,1513216710.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:30.803Z,1513216710.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:30.828Z,1513216710.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:31.261Z,1513216711.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:31.292Z,1513216711.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:31.579Z,1513216711.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:31.612Z,1513216711.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:31.980Z,1513216711.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:32.008Z,1513216712.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:32.383Z,1513216712.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:32.464Z,1513216712.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:32.805Z,1513216712.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:32.824Z,1513216712.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:33.217Z,1513216713.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:33.274Z,1513216713.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:33.598Z,1513216713.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:33.631Z,1513216713.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:33.990Z,1513216713.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:34.005Z,1513216714.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:34.390Z,1513216714.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:34.405Z,1513216714.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:34.790Z,1513216714.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:34.805Z,1513216714.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:35.182Z,1513216715.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:35.215Z,1513216715.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:35.604Z,1513216715.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:35.623Z,1513216715.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:36.001Z,1513216716.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:36.023Z,1513216716.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:36.402Z,1513216716.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:36.427Z,1513216716.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:36.779Z,1513216716.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:36.930Z,1513216716.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:37.193Z,1513216717.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:37.207Z,1513216717.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:37.595Z,1513216717.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:37.643Z,1513216717.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:37.983Z,1513216717.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:38.013Z,1513216718.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:38.398Z,1513216718.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:38.446Z,1513216718.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:38.864Z,1513216718.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:38.988Z,1513216718.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:39.197Z,1513216719.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:39.223Z,1513216719.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:39.587Z,1513216719.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:39.620Z,1513216719.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:39.986Z,1513216719.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:39.000Z,1513216720.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:40.397Z,1513216720.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:40.431Z,1513216720.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:40.797Z,1513216720.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:40.816Z,1513216720.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:41.197Z,1513216721.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:41.211Z,1513216721.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:41.592Z,1513216721.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:41.606Z,1513216721.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:41.988Z,1513216721.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:42.012Z,1513216722.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:42.391Z,1513216722.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:42.405Z,1513216722.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:42.801Z,1513216722.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:42.836Z,1513216722.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:43.202Z,1513216723.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:43.216Z,1513216723.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:46.718Z,1513216726.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:46.765Z,1513216726.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:46.858Z,1513216726.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:46.902Z,1513216726.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:47.263Z,1513216727.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:47.296Z,1513216727.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:47.638Z,1513216727.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:47.667Z,1513216727.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:48.027Z,1513216728.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:48.064Z,1513216728.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:48.419Z,1513216728.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:48.435Z,1513216728.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:48.811Z,1513216728.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:48.905Z,1513216728.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:49.212Z,1513216729.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:49.234Z,1513216729.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:49.625Z,1513216729.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:49.640Z,1513216729.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:50.029Z,1513216730.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:50.043Z,1513216730.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:50.426Z,1513216730.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:50.470Z,1513216730.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:50.852Z,1513216730.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:50.923Z,1513216730.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:51.224Z,1513216731.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:51.238Z,1513216731.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:51.629Z,1513216731.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:51.678Z,1513216731.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:52.020Z,1513216732.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:52.043Z,1513216732.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:52.434Z,1513216732.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:52.456Z,1513216732.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:52.840Z,1513216732.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:52.904Z,1513216732.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:53.233Z,1513216733.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:53.250Z,1513216733.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:53.612Z,1513216733.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:53.639Z,1513216733.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:54.012Z,1513216734.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:54.039Z,1513216734.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:54.431Z,1513216734.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:54.447Z,1513216734.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:54.873Z,1513216734.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:54.935Z,1513216734.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:55.238Z,1513216735.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:55.281Z,1513216735.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:55.620Z,1513216735.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:55.635Z,1513216735.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:56.021Z,1513216736.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:56.036Z,1513216736.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:56.423Z,1513216736.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:56.439Z,1513216736.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:56.825Z,1513216736.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:56.847Z,1513216736.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:57.234Z,1513216737.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:57.256Z,1513216737.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:57.613Z,1513216737.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:57.673Z,1513216737.673 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T01:58:57.674Z,1513216737.674 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:58:57.674Z,1513216737.674 [BPC1](ERROR): Data Fault
2017-12-14T01:58:57.752Z,1513216737.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:57.787Z,1513216737.787 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:58:58.012Z,1513216738.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:58.039Z,1513216738.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:58.435Z,1513216738.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:58.455Z,1513216738.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:58.839Z,1513216738.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:58.854Z,1513216738.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:58.867Z,1513216738.867 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:58:58.867Z,1513216738.867 [BPC1] No Fault, FailCount= 1
2017-12-14T01:58:59.260Z,1513216739.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:59.354Z,1513216739.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:58:59.615Z,1513216739.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:58:59.642Z,1513216739.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:00.011Z,1513216740.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:00.043Z,1513216740.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:00.057Z,1513216740.057 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T01:59:00.412Z,1513216740.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:00.445Z,1513216740.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:00.817Z,1513216740.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:00.844Z,1513216740.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:01.254Z,1513216741.254 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T01:59:01.254Z,1513216741.254 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T01:59:01.254Z,1513216741.254 [DropWeight](ERROR): Hardware Fault
2017-12-14T01:59:01.280Z,1513216741.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:01.307Z,1513216741.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:01.343Z,1513216741.343 [CBIT](INFO): Critical error at 20171214T015901
2017-12-14T01:59:01.356Z,1513216741.356 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T01:59:01.365Z,1513216741.365 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T01:59:01.625Z,1513216741.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:01.652Z,1513216741.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:01.664Z,1513216741.664 [CBIT](INFO): Critical error at 20171214T015901
2017-12-14T01:59:02.034Z,1513216742.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:02.055Z,1513216742.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:02.422Z,1513216742.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:02.459Z,1513216742.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:02.814Z,1513216742.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:02.902Z,1513216742.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:03.216Z,1513216743.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:03.235Z,1513216743.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:03.619Z,1513216743.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:03.635Z,1513216743.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:04.019Z,1513216744.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:04.033Z,1513216744.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:04.434Z,1513216744.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:04.468Z,1513216744.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:04.840Z,1513216744.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:04.916Z,1513216744.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:05.225Z,1513216745.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:05.243Z,1513216745.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:05.620Z,1513216745.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:05.639Z,1513216745.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:06.022Z,1513216746.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:06.038Z,1513216746.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:06.426Z,1513216746.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:06.494Z,1513216746.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:06.844Z,1513216746.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:06.919Z,1513216746.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:07.225Z,1513216747.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:07.240Z,1513216747.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:07.618Z,1513216747.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:07.691Z,1513216747.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:08.011Z,1513216748.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:08.048Z,1513216748.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:08.430Z,1513216748.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:08.446Z,1513216748.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:08.905Z,1513216748.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:08.939Z,1513216748.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:09.235Z,1513216749.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:09.250Z,1513216749.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:09.625Z,1513216749.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:09.640Z,1513216749.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:10.012Z,1513216750.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:10.038Z,1513216750.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:10.429Z,1513216750.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:10.461Z,1513216750.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:10.843Z,1513216750.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:10.867Z,1513216750.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:11.255Z,1513216751.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:11.270Z,1513216751.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:11.620Z,1513216751.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:11.651Z,1513216751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:12.014Z,1513216752.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:12.030Z,1513216752.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:12.429Z,1513216752.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:12.460Z,1513216752.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:12.857Z,1513216752.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:12.872Z,1513216752.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:13.260Z,1513216753.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:13.284Z,1513216753.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:13.618Z,1513216753.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:13.633Z,1513216753.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:14.020Z,1513216754.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:14.035Z,1513216754.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:14.426Z,1513216754.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:14.461Z,1513216754.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:14.822Z,1513216754.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:14.837Z,1513216754.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:15.269Z,1513216755.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:15.300Z,1513216755.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:15.626Z,1513216755.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:15.641Z,1513216755.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:16.030Z,1513216756.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:16.045Z,1513216756.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:16.426Z,1513216756.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:16.447Z,1513216756.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:16.841Z,1513216756.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:16.910Z,1513216756.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:17.222Z,1513216757.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:17.266Z,1513216757.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:17.627Z,1513216757.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:17.667Z,1513216757.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:18.018Z,1513216758.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:18.033Z,1513216758.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:18.433Z,1513216758.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:18.463Z,1513216758.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:18.873Z,1513216758.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:18.973Z,1513216758.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:19.234Z,1513216759.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:19.251Z,1513216759.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:19.620Z,1513216759.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:19.702Z,1513216759.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:20.011Z,1513216760.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:20.037Z,1513216760.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:20.446Z,1513216760.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:20.503Z,1513216760.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:20.856Z,1513216760.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:20.920Z,1513216760.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:21.226Z,1513216761.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:21.268Z,1513216761.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:21.622Z,1513216761.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:21.636Z,1513216761.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:22.018Z,1513216762.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:22.034Z,1513216762.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:22.416Z,1513216762.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:22.431Z,1513216762.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:22.856Z,1513216762.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:22.916Z,1513216762.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:23.225Z,1513216763.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:23.243Z,1513216763.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:23.650Z,1513216763.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:23.673Z,1513216763.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:24.011Z,1513216764.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:24.038Z,1513216764.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:24.428Z,1513216764.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:24.444Z,1513216764.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:24.444Z,1513216764.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2017-12-14T01:59:24.444Z,1513216764.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T01:59:24.459Z,1513216764.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T01:59:24.829Z,1513216764.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:24.844Z,1513216764.844 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:24.844Z,1513216764.844 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2017-12-14T01:59:24.844Z,1513216764.844 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T01:59:24.846Z,1513216764.846 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:24.846Z,1513216764.846 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2017-12-14T01:59:24.846Z,1513216764.846 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T01:59:24.859Z,1513216764.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T01:59:24.859Z,1513216764.859 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2017-12-14T01:59:24.860Z,1513216764.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T01:59:24.860Z,1513216764.860 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T01:59:25.222Z,1513216765.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:25.254Z,1513216765.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T01:59:25.254Z,1513216765.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:59:25.255Z,1513216765.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:59:25.279Z,1513216765.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T01:59:25.279Z,1513216765.279 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2017-12-14T01:59:25.279Z,1513216765.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T01:59:25.279Z,1513216765.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2017-12-14T01:59:25.612Z,1513216765.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:25.627Z,1513216765.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:25.627Z,1513216765.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T01:59:25.628Z,1513216765.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:59:25.628Z,1513216765.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:59:25.645Z,1513216765.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T01:59:25.646Z,1513216765.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T01:59:25.646Z,1513216765.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T01:59:26.016Z,1513216766.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:26.031Z,1513216766.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:26.428Z,1513216766.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:26.459Z,1513216766.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:26.876Z,1513216766.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:26.912Z,1513216766.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:27.258Z,1513216767.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:27.293Z,1513216767.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:27.618Z,1513216767.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:27.645Z,1513216767.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:28.023Z,1513216768.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:28.039Z,1513216768.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:28.431Z,1513216768.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:28.446Z,1513216768.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:28.831Z,1513216768.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:28.858Z,1513216768.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:29.258Z,1513216769.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:29.304Z,1513216769.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:29.610Z,1513216769.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:29.646Z,1513216769.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:30.022Z,1513216770.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:30.067Z,1513216770.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:30.425Z,1513216770.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:30.449Z,1513216770.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:30.813Z,1513216770.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:30.911Z,1513216770.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:31.211Z,1513216771.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:31.235Z,1513216771.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:31.628Z,1513216771.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:31.647Z,1513216771.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:32.030Z,1513216772.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:32.045Z,1513216772.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:32.430Z,1513216772.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:32.444Z,1513216772.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:32.811Z,1513216772.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:32.906Z,1513216772.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:33.244Z,1513216773.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:33.301Z,1513216773.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:33.618Z,1513216773.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:33.633Z,1513216773.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:34.018Z,1513216774.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:34.033Z,1513216774.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:34.416Z,1513216774.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:34.431Z,1513216774.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:34.868Z,1513216774.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:34.913Z,1513216774.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:35.222Z,1513216775.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:35.236Z,1513216775.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:35.620Z,1513216775.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:35.634Z,1513216775.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:36.020Z,1513216776.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:36.035Z,1513216776.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:36.436Z,1513216776.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:36.491Z,1513216776.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:36.840Z,1513216776.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:36.918Z,1513216776.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:37.224Z,1513216777.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:37.243Z,1513216777.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:37.623Z,1513216777.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:37.638Z,1513216777.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:38.024Z,1513216778.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:38.039Z,1513216778.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:38.426Z,1513216778.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:38.441Z,1513216778.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:38.825Z,1513216778.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:38.840Z,1513216778.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:39.231Z,1513216779.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:39.251Z,1513216779.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:39.612Z,1513216779.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:39.685Z,1513216779.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:40.016Z,1513216780.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:40.045Z,1513216780.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:40.425Z,1513216780.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:40.433Z,1513216780.433 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T01:59:40.433Z,1513216780.433 [BPC1] Data Fault, FailCount= 1
2017-12-14T01:59:40.434Z,1513216780.434 [BPC1](ERROR): Data Fault
2017-12-14T01:59:40.467Z,1513216780.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:40.481Z,1513216780.481 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T01:59:40.830Z,1513216780.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:40.856Z,1513216780.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:41.273Z,1513216781.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:41.287Z,1513216781.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:41.619Z,1513216781.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:41.635Z,1513216781.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:41.677Z,1513216781.677 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T01:59:41.677Z,1513216781.677 [BPC1] No Fault, FailCount= 1
2017-12-14T01:59:42.020Z,1513216782.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:42.087Z,1513216782.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:42.421Z,1513216782.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:42.436Z,1513216782.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:42.861Z,1513216782.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:42.926Z,1513216782.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:43.274Z,1513216783.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:43.317Z,1513216783.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:46.672Z,1513216786.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:46.687Z,1513216786.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:46.798Z,1513216786.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:46.897Z,1513216786.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:47.159Z,1513216787.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:47.187Z,1513216787.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:47.547Z,1513216787.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:47.576Z,1513216787.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:47.940Z,1513216787.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:47.960Z,1513216787.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:48.344Z,1513216788.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:48.363Z,1513216788.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:48.754Z,1513216788.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:48.769Z,1513216788.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:49.158Z,1513216789.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:49.174Z,1513216789.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:49.555Z,1513216789.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:49.571Z,1513216789.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:49.953Z,1513216789.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:49.967Z,1513216789.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:50.329Z,1513216790.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:50.372Z,1513216790.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:50.756Z,1513216790.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:50.780Z,1513216790.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:51.135Z,1513216791.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:51.175Z,1513216791.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:51.561Z,1513216791.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:51.581Z,1513216791.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:51.959Z,1513216791.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:51.980Z,1513216791.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:52.375Z,1513216792.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:52.409Z,1513216792.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:52.740Z,1513216792.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:52.768Z,1513216792.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:53.146Z,1513216793.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:53.160Z,1513216793.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:53.544Z,1513216793.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:53.559Z,1513216793.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:53.936Z,1513216793.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:53.960Z,1513216793.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:54.342Z,1513216794.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:54.363Z,1513216794.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:54.750Z,1513216794.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:54.764Z,1513216794.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:55.150Z,1513216795.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:55.223Z,1513216795.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:55.559Z,1513216795.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:55.599Z,1513216795.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:55.963Z,1513216795.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:55.978Z,1513216795.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:56.332Z,1513216796.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:56.348Z,1513216796.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:56.430Z,1513216796.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:56.743Z,1513216796.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:56.776Z,1513216796.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:57.135Z,1513216797.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:57.150Z,1513216797.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:57.226Z,1513216797.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:57.558Z,1513216797.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:57.589Z,1513216797.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:57.633Z,1513216797.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:57.954Z,1513216797.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:57.969Z,1513216797.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:58.350Z,1513216798.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:58.371Z,1513216798.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:58.759Z,1513216798.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:58.801Z,1513216798.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:59.135Z,1513216799.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:59.160Z,1513216799.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:59.533Z,1513216799.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:59.567Z,1513216799.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T01:59:59.936Z,1513216799.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T01:59:59.963Z,1513216799.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:00.350Z,1513216800.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:00.372Z,1513216800.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:00.757Z,1513216800.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:00.779Z,1513216800.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:01.150Z,1513216801.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:01.171Z,1513216801.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:01.566Z,1513216801.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:01.582Z,1513216801.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:01.947Z,1513216801.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:01.980Z,1513216801.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:02.342Z,1513216802.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:02.415Z,1513216802.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:02.741Z,1513216802.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:02.757Z,1513216802.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:03.143Z,1513216803.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:03.199Z,1513216803.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:03.554Z,1513216803.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:03.587Z,1513216803.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:03.958Z,1513216803.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:04.029Z,1513216804.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:04.358Z,1513216804.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:04.383Z,1513216804.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:04.736Z,1513216804.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:04.752Z,1513216804.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:05.160Z,1513216805.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:05.198Z,1513216805.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:05.544Z,1513216805.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:05.563Z,1513216805.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:05.937Z,1513216805.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:05.952Z,1513216805.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:06.343Z,1513216806.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:06.358Z,1513216806.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:06.747Z,1513216806.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:06.767Z,1513216806.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:07.151Z,1513216807.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:07.166Z,1513216807.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:07.558Z,1513216807.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:07.592Z,1513216807.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:07.943Z,1513216807.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:07.958Z,1513216807.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:08.358Z,1513216808.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:08.389Z,1513216808.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:08.755Z,1513216808.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:08.771Z,1513216808.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:09.148Z,1513216809.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:09.162Z,1513216809.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:09.554Z,1513216809.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:09.574Z,1513216809.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:09.957Z,1513216809.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:09.979Z,1513216809.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:10.358Z,1513216810.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:10.373Z,1513216810.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:10.437Z,1513216810.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:10.739Z,1513216810.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:10.765Z,1513216810.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:11.142Z,1513216811.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:11.234Z,1513216811.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:11.242Z,1513216811.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:11.584Z,1513216811.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:11.637Z,1513216811.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:11.639Z,1513216811.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:11.933Z,1513216811.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:11.948Z,1513216811.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:12.339Z,1513216812.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:12.391Z,1513216812.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:12.750Z,1513216812.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:12.775Z,1513216812.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:13.158Z,1513216813.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:13.180Z,1513216813.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:13.550Z,1513216813.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:13.565Z,1513216813.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:13.936Z,1513216813.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:13.955Z,1513216813.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:14.335Z,1513216814.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:14.352Z,1513216814.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:14.782Z,1513216814.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:14.856Z,1513216814.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:15.134Z,1513216815.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:15.165Z,1513216815.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:15.551Z,1513216815.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:15.582Z,1513216815.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:15.962Z,1513216815.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:15.976Z,1513216815.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:16.356Z,1513216816.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:16.371Z,1513216816.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:16.747Z,1513216816.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:16.768Z,1513216816.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:17.155Z,1513216817.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:17.171Z,1513216817.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:17.548Z,1513216817.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:17.584Z,1513216817.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:17.963Z,1513216817.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:17.983Z,1513216817.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:18.360Z,1513216818.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:18.375Z,1513216818.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:18.747Z,1513216818.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:18.781Z,1513216818.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:19.151Z,1513216819.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:19.183Z,1513216819.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:19.555Z,1513216819.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:19.578Z,1513216819.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:19.942Z,1513216819.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:19.982Z,1513216819.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:20.343Z,1513216820.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:20.379Z,1513216820.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:20.743Z,1513216820.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:20.759Z,1513216820.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:21.160Z,1513216821.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:21.195Z,1513216821.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:21.546Z,1513216821.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:21.564Z,1513216821.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:21.949Z,1513216821.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:21.964Z,1513216821.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:22.358Z,1513216822.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:22.397Z,1513216822.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:22.742Z,1513216822.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:22.757Z,1513216822.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:23.145Z,1513216823.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:23.243Z,1513216823.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:23.544Z,1513216823.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:23.580Z,1513216823.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:23.940Z,1513216823.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:23.998Z,1513216823.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:24.379Z,1513216824.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:24.403Z,1513216824.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:24.434Z,1513216824.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:24.758Z,1513216824.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:24.782Z,1513216824.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:25.154Z,1513216825.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:25.229Z,1513216825.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:25.247Z,1513216825.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:25.558Z,1513216825.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:25.588Z,1513216825.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:25.641Z,1513216825.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:25.944Z,1513216825.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:25.994Z,1513216825.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:26.342Z,1513216826.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:26.358Z,1513216826.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:26.438Z,1513216826.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:26.744Z,1513216826.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:26.760Z,1513216826.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:27.146Z,1513216827.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:27.160Z,1513216827.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:27.233Z,1513216827.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:27.561Z,1513216827.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:27.609Z,1513216827.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:27.637Z,1513216827.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:27.962Z,1513216827.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:27.976Z,1513216827.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:28.351Z,1513216828.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:28.386Z,1513216828.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:28.739Z,1513216828.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:28.775Z,1513216828.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:29.140Z,1513216829.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:29.185Z,1513216829.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:29.538Z,1513216829.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:29.566Z,1513216829.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:29.937Z,1513216829.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:29.952Z,1513216829.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:30.340Z,1513216830.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:30.354Z,1513216830.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:30.804Z,1513216830.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:30.905Z,1513216830.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:31.158Z,1513216831.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:31.173Z,1513216831.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:31.554Z,1513216831.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:31.575Z,1513216831.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:31.935Z,1513216831.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:31.967Z,1513216831.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:32.333Z,1513216832.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:32.371Z,1513216832.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:32.740Z,1513216832.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:32.767Z,1513216832.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:33.134Z,1513216833.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:33.152Z,1513216833.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:33.546Z,1513216833.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:33.579Z,1513216833.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:33.982Z,1513216833.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:34.083Z,1513216834.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:34.362Z,1513216834.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:34.385Z,1513216834.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:34.742Z,1513216834.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:34.763Z,1513216834.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:35.144Z,1513216835.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:35.159Z,1513216835.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:35.542Z,1513216835.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:35.558Z,1513216835.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:35.944Z,1513216835.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:35.960Z,1513216835.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:36.342Z,1513216836.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:36.357Z,1513216836.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:36.758Z,1513216836.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:36.788Z,1513216836.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:37.142Z,1513216837.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:37.157Z,1513216837.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:37.556Z,1513216837.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:37.571Z,1513216837.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:37.953Z,1513216837.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:37.975Z,1513216837.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:38.332Z,1513216838.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:38.363Z,1513216838.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:38.735Z,1513216838.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:38.766Z,1513216838.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:39.138Z,1513216839.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:39.228Z,1513216839.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:39.550Z,1513216839.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:39.573Z,1513216839.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:39.964Z,1513216839.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:39.979Z,1513216839.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:40.354Z,1513216840.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:40.387Z,1513216840.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:40.741Z,1513216840.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:40.756Z,1513216840.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:41.147Z,1513216841.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:41.161Z,1513216841.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:41.546Z,1513216841.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:41.561Z,1513216841.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:41.942Z,1513216841.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:41.971Z,1513216841.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:42.348Z,1513216842.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:42.363Z,1513216842.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:42.751Z,1513216842.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:42.771Z,1513216842.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:43.163Z,1513216843.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:43.199Z,1513216843.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:43.572Z,1513216843.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:43.608Z,1513216843.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:47.049Z,1513216847.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:47.125Z,1513216847.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:47.213Z,1513216847.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:47.250Z,1513216847.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:47.597Z,1513216847.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:47.651Z,1513216847.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:47.996Z,1513216847.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:48.027Z,1513216848.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:48.386Z,1513216848.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:48.435Z,1513216848.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:48.787Z,1513216848.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:48.818Z,1513216848.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:49.184Z,1513216849.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:49.199Z,1513216849.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:49.587Z,1513216849.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:49.602Z,1513216849.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:50.002Z,1513216850.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:50.045Z,1513216850.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:50.389Z,1513216850.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:50.404Z,1513216850.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:50.797Z,1513216850.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:50.812Z,1513216850.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:51.231Z,1513216851.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:51.246Z,1513216851.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:51.589Z,1513216851.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:51.604Z,1513216851.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:51.980Z,1513216851.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:52.007Z,1513216852.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:52.401Z,1513216852.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:52.416Z,1513216852.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:52.797Z,1513216852.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:52.811Z,1513216852.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:53.265Z,1513216853.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:53.304Z,1513216853.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:53.589Z,1513216853.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:53.604Z,1513216853.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:53.987Z,1513216853.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:54.002Z,1513216854.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:54.383Z,1513216854.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:54.402Z,1513216854.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:54.783Z,1513216854.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:54.806Z,1513216854.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:55.178Z,1513216855.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:55.205Z,1513216855.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:55.601Z,1513216855.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:55.622Z,1513216855.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:56.002Z,1513216856.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:56.022Z,1513216856.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:56.405Z,1513216856.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:56.419Z,1513216856.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:56.779Z,1513216856.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:56.903Z,1513216856.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:57.182Z,1513216857.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:57.214Z,1513216857.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:57.580Z,1513216857.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:57.618Z,1513216857.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:57.980Z,1513216857.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:58.015Z,1513216858.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:58.390Z,1513216858.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:58.427Z,1513216858.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:58.808Z,1513216858.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:58.873Z,1513216858.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:59.190Z,1513216859.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:59.214Z,1513216859.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:59.602Z,1513216859.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:00:59.638Z,1513216859.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:00:59.994Z,1513216859.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:00.030Z,1513216860.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:00.386Z,1513216860.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:00.401Z,1513216860.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:00.801Z,1513216860.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:00.891Z,1513216860.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:01.201Z,1513216861.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:01.227Z,1513216861.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:01.580Z,1513216861.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:01.607Z,1513216861.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:01.980Z,1513216861.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:02.015Z,1513216862.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:02.379Z,1513216862.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:02.393Z,1513216862.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:02.800Z,1513216862.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:02.833Z,1513216862.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:03.195Z,1513216863.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:03.210Z,1513216863.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:03.593Z,1513216863.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:03.612Z,1513216863.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:03.988Z,1513216863.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:04.004Z,1513216864.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:04.391Z,1513216864.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:04.406Z,1513216864.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:04.793Z,1513216864.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:04.809Z,1513216864.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:05.240Z,1513216865.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:05.280Z,1513216865.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:05.608Z,1513216865.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:05.622Z,1513216865.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:06.011Z,1513216866.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:06.027Z,1513216866.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:06.402Z,1513216866.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:06.435Z,1513216866.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:06.792Z,1513216866.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:06.807Z,1513216866.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:07.239Z,1513216867.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:07.270Z,1513216867.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:07.591Z,1513216867.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:07.639Z,1513216867.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:07.988Z,1513216867.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:08.002Z,1513216868.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:08.384Z,1513216868.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:08.422Z,1513216868.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:08.798Z,1513216868.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:08.859Z,1513216868.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:09.231Z,1513216869.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:09.307Z,1513216869.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:09.593Z,1513216869.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:09.609Z,1513216869.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:09.987Z,1513216869.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:10.046Z,1513216870.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:10.388Z,1513216870.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:10.410Z,1513216870.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:10.793Z,1513216870.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:10.901Z,1513216870.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:11.180Z,1513216871.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:11.207Z,1513216871.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:11.594Z,1513216871.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:11.626Z,1513216871.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:12.010Z,1513216872.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:12.024Z,1513216872.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:12.398Z,1513216872.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:12.414Z,1513216872.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:12.780Z,1513216872.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:12.852Z,1513216872.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:13.203Z,1513216873.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:13.232Z,1513216873.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:13.581Z,1513216873.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:13.611Z,1513216873.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:13.996Z,1513216873.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:14.032Z,1513216874.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:14.384Z,1513216874.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:14.428Z,1513216874.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:14.796Z,1513216874.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:14.891Z,1513216874.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:15.208Z,1513216875.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:15.235Z,1513216875.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:15.596Z,1513216875.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:15.683Z,1513216875.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:15.984Z,1513216875.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:16.034Z,1513216876.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:16.389Z,1513216876.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:16.442Z,1513216876.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:16.790Z,1513216876.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:16.838Z,1513216876.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:17.180Z,1513216877.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:17.227Z,1513216877.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:17.594Z,1513216877.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:17.638Z,1513216877.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:17.996Z,1513216877.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:18.036Z,1513216878.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:18.400Z,1513216878.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:18.436Z,1513216878.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:18.788Z,1513216878.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:18.842Z,1513216878.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:19.261Z,1513216879.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:19.349Z,1513216879.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:19.580Z,1513216879.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:19.624Z,1513216879.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:20.020Z,1513216880.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:20.034Z,1513216880.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:20.387Z,1513216880.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:20.402Z,1513216880.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:20.798Z,1513216880.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:20.824Z,1513216880.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:21.267Z,1513216881.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:21.290Z,1513216881.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:21.590Z,1513216881.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:21.624Z,1513216881.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:21.979Z,1513216881.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:21.999Z,1513216881.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:22.385Z,1513216882.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:22.436Z,1513216882.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:22.785Z,1513216882.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:22.909Z,1513216882.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:23.196Z,1513216883.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:23.222Z,1513216883.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:23.605Z,1513216883.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:23.639Z,1513216883.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:23.993Z,1513216883.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:24.082Z,1513216884.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:24.396Z,1513216884.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:24.435Z,1513216884.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:24.781Z,1513216884.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:24.878Z,1513216884.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:25.203Z,1513216885.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:25.315Z,1513216885.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:25.588Z,1513216885.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:25.615Z,1513216885.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:25.989Z,1513216885.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:26.044Z,1513216886.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:26.410Z,1513216886.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:26.451Z,1513216886.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:26.804Z,1513216886.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:26.902Z,1513216886.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:27.195Z,1513216887.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:27.236Z,1513216887.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:27.592Z,1513216887.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:27.627Z,1513216887.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:27.988Z,1513216887.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:28.045Z,1513216888.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:28.382Z,1513216888.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:28.408Z,1513216888.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:28.804Z,1513216888.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:28.889Z,1513216888.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:29.190Z,1513216889.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:29.215Z,1513216889.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:29.604Z,1513216889.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:29.647Z,1513216889.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:30.006Z,1513216890.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:30.048Z,1513216890.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:30.392Z,1513216890.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:30.443Z,1513216890.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:30.780Z,1513216890.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:30.829Z,1513216890.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:31.179Z,1513216891.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:31.205Z,1513216891.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:31.579Z,1513216891.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:31.635Z,1513216891.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:31.981Z,1513216891.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:32.038Z,1513216892.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:32.384Z,1513216892.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:32.456Z,1513216892.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:32.803Z,1513216892.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:32.817Z,1513216892.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:33.288Z,1513216893.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:33.363Z,1513216893.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:33.594Z,1513216893.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:33.625Z,1513216893.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:33.987Z,1513216893.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:34.016Z,1513216894.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:34.390Z,1513216894.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:34.411Z,1513216894.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:34.782Z,1513216894.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:34.813Z,1513216894.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:35.253Z,1513216895.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:35.297Z,1513216895.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:35.601Z,1513216895.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:35.631Z,1513216895.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:36.001Z,1513216896.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:36.032Z,1513216896.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:36.402Z,1513216896.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:36.434Z,1513216896.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:36.790Z,1513216896.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:36.804Z,1513216896.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:37.185Z,1513216897.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:37.212Z,1513216897.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:37.589Z,1513216897.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:37.605Z,1513216897.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:37.987Z,1513216897.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:38.001Z,1513216898.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:38.390Z,1513216898.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:38.405Z,1513216898.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:38.802Z,1513216898.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:38.891Z,1513216898.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:39.207Z,1513216899.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:39.221Z,1513216899.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:39.584Z,1513216899.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:39.616Z,1513216899.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:39.979Z,1513216899.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:40.016Z,1513216900.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:40.390Z,1513216900.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:40.425Z,1513216900.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:40.806Z,1513216900.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:40.888Z,1513216900.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:41.198Z,1513216901.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:41.219Z,1513216901.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:41.601Z,1513216901.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:41.675Z,1513216901.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:41.988Z,1513216901.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:42.004Z,1513216902.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:42.392Z,1513216902.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:42.415Z,1513216902.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:42.798Z,1513216902.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:42.898Z,1513216902.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:43.202Z,1513216903.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:43.224Z,1513216903.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:43.590Z,1513216903.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:43.613Z,1513216903.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:47.004Z,1513216907.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:47.028Z,1513216907.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:47.031Z,1513216907.031 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T01:56:46.3Z
2017-12-14T02:01:47.031Z,1513216907.031 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:01:47.031Z,1513216907.031 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:01:47.128Z,1513216907.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:47.222Z,1513216907.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:47.902Z,1513216907.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:47.917Z,1513216907.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:48.029Z,1513216908.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:48.103Z,1513216908.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:48.383Z,1513216908.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:48.406Z,1513216908.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:48.770Z,1513216908.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:48.786Z,1513216908.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:52.314Z,1513216912.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:52.330Z,1513216912.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:52.418Z,1513216912.418 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0036.lzma
2017-12-14T02:01:52.439Z,1513216912.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:52.531Z,1513216912.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:52.862Z,1513216912.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:52.921Z,1513216912.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:53.961Z,1513216913.961 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0036.lzma.bak
2017-12-14T02:01:53.961Z,1513216913.961 [DataOverHttps](INFO): SBD MOMSN=5437384
2017-12-14T02:01:54.002Z,1513216914.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:54.051Z,1513216914.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:55.098Z,1513216915.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:55.112Z,1513216915.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:55.219Z,1513216915.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:55.254Z,1513216915.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:58.702Z,1513216918.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:58.747Z,1513216918.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:58.847Z,1513216918.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:58.940Z,1513216918.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:59.213Z,1513216919.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:59.266Z,1513216919.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:01:59.615Z,1513216919.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:01:59.629Z,1513216919.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:00.013Z,1513216920.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:00.029Z,1513216920.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:00.404Z,1513216920.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:00.419Z,1513216920.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:03.984Z,1513216923.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:04.008Z,1513216924.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:04.123Z,1513216924.123 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0037.lzma
2017-12-14T02:02:04.180Z,1513216924.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:04.226Z,1513216924.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:04.470Z,1513216924.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:04.504Z,1513216924.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:04.848Z,1513216924.848 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0037.lzma.bak
2017-12-14T02:02:04.873Z,1513216924.873 [DataOverHttps](INFO): SBD MOMSN=5437388
2017-12-14T02:02:04.924Z,1513216924.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:04.952Z,1513216924.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:06.007Z,1513216926.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:06.022Z,1513216926.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:06.025Z,1513216926.025 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:02:06.026Z,1513216926.026 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:02:06.026Z,1513216926.026 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:02:06.123Z,1513216926.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:06.146Z,1513216926.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:09.685Z,1513216929.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:09.730Z,1513216929.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:09.827Z,1513216929.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:09.847Z,1513216929.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:10.198Z,1513216930.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:10.222Z,1513216930.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:10.599Z,1513216930.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:10.632Z,1513216930.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:11.002Z,1513216931.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:11.031Z,1513216931.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:11.390Z,1513216931.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:11.405Z,1513216931.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:11.784Z,1513216931.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:11.799Z,1513216931.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:12.180Z,1513216932.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:12.195Z,1513216932.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:12.597Z,1513216932.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:12.612Z,1513216932.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:12.992Z,1513216932.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:13.036Z,1513216933.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:13.390Z,1513216933.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:13.404Z,1513216933.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:13.800Z,1513216933.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:13.840Z,1513216933.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:14.183Z,1513216934.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:14.203Z,1513216934.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:14.587Z,1513216934.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:14.602Z,1513216934.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:14.989Z,1513216934.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:15.004Z,1513216935.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:15.388Z,1513216935.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:15.419Z,1513216935.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:15.797Z,1513216935.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:15.812Z,1513216935.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:16.195Z,1513216936.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:16.210Z,1513216936.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:16.592Z,1513216936.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:16.606Z,1513216936.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:16.995Z,1513216936.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:17.022Z,1513216937.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:17.394Z,1513216937.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:17.408Z,1513216937.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:17.798Z,1513216937.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:17.812Z,1513216937.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:18.206Z,1513216938.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:18.221Z,1513216938.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:18.584Z,1513216938.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:18.610Z,1513216938.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:18.975Z,1513216938.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:19.007Z,1513216939.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:19.375Z,1513216939.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:19.407Z,1513216939.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:19.804Z,1513216939.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:19.862Z,1513216939.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:20.198Z,1513216940.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:20.218Z,1513216940.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:20.586Z,1513216940.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:20.639Z,1513216940.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:20.991Z,1513216940.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:21.013Z,1513216941.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:21.384Z,1513216941.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:21.416Z,1513216941.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:21.778Z,1513216941.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:21.809Z,1513216941.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:22.177Z,1513216942.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:22.192Z,1513216942.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:22.585Z,1513216942.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:22.617Z,1513216942.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:23.002Z,1513216943.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:23.023Z,1513216943.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:23.396Z,1513216943.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:23.425Z,1513216943.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:23.791Z,1513216943.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:23.826Z,1513216943.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:24.172Z,1513216944.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:24.195Z,1513216944.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:24.585Z,1513216944.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:24.600Z,1513216944.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:24.980Z,1513216944.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:24.997Z,1513216944.997 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:02:24.997Z,1513216944.997 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:02:24.997Z,1513216944.997 [BPC1](ERROR): Communications Fault
2017-12-14T02:02:25.083Z,1513216945.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:25.100Z,1513216945.100 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:02:25.380Z,1513216945.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:25.399Z,1513216945.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:25.399Z,1513216945.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2017-12-14T02:02:25.399Z,1513216945.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:02:25.442Z,1513216945.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:02:25.798Z,1513216945.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:25.812Z,1513216945.812 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:25.812Z,1513216945.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2017-12-14T02:02:25.812Z,1513216945.812 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:02:25.830Z,1513216945.830 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:25.830Z,1513216945.830 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2017-12-14T02:02:25.830Z,1513216945.830 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:02:25.851Z,1513216945.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:02:25.851Z,1513216945.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2017-12-14T02:02:25.851Z,1513216945.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:02:25.852Z,1513216945.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:02:26.205Z,1513216946.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:26.218Z,1513216946.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:02:26.219Z,1513216946.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:02:26.219Z,1513216946.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:02:26.262Z,1513216946.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:02:26.262Z,1513216946.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2017-12-14T02:02:26.263Z,1513216946.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:02:26.263Z,1513216946.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2017-12-14T02:02:26.263Z,1513216946.263 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:02:26.263Z,1513216946.263 [BPC1] No Fault, FailCount= 1
2017-12-14T02:02:26.604Z,1513216946.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:26.718Z,1513216946.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:26.719Z,1513216946.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:02:26.719Z,1513216946.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:02:26.720Z,1513216946.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:02:26.720Z,1513216946.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:02:26.745Z,1513216946.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:02:26.746Z,1513216946.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:02:26.984Z,1513216946.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:26.999Z,1513216946.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:27.378Z,1513216947.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:27.403Z,1513216947.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:27.793Z,1513216947.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:27.808Z,1513216947.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:28.187Z,1513216948.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:28.202Z,1513216948.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:28.595Z,1513216948.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:28.609Z,1513216948.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:28.996Z,1513216948.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:29.019Z,1513216949.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:29.396Z,1513216949.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:29.416Z,1513216949.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:29.787Z,1513216949.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:29.801Z,1513216949.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:30.175Z,1513216950.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:30.210Z,1513216950.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:30.583Z,1513216950.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:30.609Z,1513216950.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:30.980Z,1513216950.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:31.007Z,1513216951.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:31.375Z,1513216951.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:31.408Z,1513216951.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:31.842Z,1513216951.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:31.859Z,1513216951.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:32.189Z,1513216952.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:32.203Z,1513216952.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:32.594Z,1513216952.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:32.608Z,1513216952.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:33.024Z,1513216953.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:33.052Z,1513216953.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:33.375Z,1513216953.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:33.391Z,1513216953.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:33.773Z,1513216953.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:33.788Z,1513216953.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:34.180Z,1513216954.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:34.195Z,1513216954.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:34.604Z,1513216954.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:34.619Z,1513216954.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:34.988Z,1513216954.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:35.035Z,1513216955.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:35.390Z,1513216955.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:35.404Z,1513216955.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:35.783Z,1513216955.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:35.798Z,1513216955.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:36.174Z,1513216956.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:36.203Z,1513216956.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:36.575Z,1513216956.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:36.591Z,1513216956.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:36.975Z,1513216956.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:36.991Z,1513216956.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:37.377Z,1513216957.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:37.403Z,1513216957.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:37.790Z,1513216957.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:37.805Z,1513216957.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:38.191Z,1513216958.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:38.205Z,1513216958.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:38.587Z,1513216958.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:38.602Z,1513216958.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:38.978Z,1513216958.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:38.999Z,1513216958.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:39.390Z,1513216959.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:39.421Z,1513216959.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:39.780Z,1513216959.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:39.796Z,1513216959.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:40.177Z,1513216960.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:40.192Z,1513216960.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:40.593Z,1513216960.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:40.608Z,1513216960.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:40.988Z,1513216960.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:41.005Z,1513216961.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:41.390Z,1513216961.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:41.407Z,1513216961.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:41.776Z,1513216961.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:41.792Z,1513216961.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:42.186Z,1513216962.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:42.221Z,1513216962.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:42.581Z,1513216962.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:42.602Z,1513216962.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:42.978Z,1513216962.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:42.992Z,1513216962.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:43.375Z,1513216963.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:43.392Z,1513216963.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:43.789Z,1513216963.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:43.806Z,1513216963.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:44.188Z,1513216964.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:44.207Z,1513216964.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:44.590Z,1513216964.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:44.604Z,1513216964.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:44.975Z,1513216964.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:44.990Z,1513216964.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:45.381Z,1513216965.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:45.389Z,1513216965.389 [BPC1](ERROR): Failed to parse message.
2017-12-14T02:02:45.390Z,1513216965.390 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:02:45.390Z,1513216965.390 [BPC1] Data Fault, FailCount= 2
2017-12-14T02:02:45.390Z,1513216965.390 [BPC1](ERROR): Data Fault
2017-12-14T02:02:45.398Z,1513216965.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:45.411Z,1513216965.411 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:02:45.777Z,1513216965.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:45.793Z,1513216965.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:46.176Z,1513216966.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:46.191Z,1513216966.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:46.590Z,1513216966.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:46.605Z,1513216966.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:46.619Z,1513216966.619 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:02:46.619Z,1513216966.619 [BPC1] No Fault, FailCount= 2
2017-12-14T02:02:46.994Z,1513216966.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:47.083Z,1513216967.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:47.387Z,1513216967.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:47.415Z,1513216967.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:47.776Z,1513216967.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:47.842Z,1513216967.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:48.175Z,1513216968.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:48.198Z,1513216968.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:48.590Z,1513216968.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:48.618Z,1513216968.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:48.976Z,1513216968.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:49.007Z,1513216969.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:49.386Z,1513216969.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:49.413Z,1513216969.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:49.790Z,1513216969.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:49.817Z,1513216969.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:50.197Z,1513216970.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:50.221Z,1513216970.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:50.575Z,1513216970.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:50.608Z,1513216970.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:50.975Z,1513216970.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:50.991Z,1513216970.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:51.379Z,1513216971.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:51.414Z,1513216971.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:51.801Z,1513216971.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:51.816Z,1513216971.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:52.191Z,1513216972.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:52.224Z,1513216972.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:52.586Z,1513216972.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:52.612Z,1513216972.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:52.975Z,1513216972.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:52.992Z,1513216972.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:53.384Z,1513216973.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:53.407Z,1513216973.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:53.785Z,1513216973.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:53.800Z,1513216973.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:54.171Z,1513216974.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:54.203Z,1513216974.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:54.585Z,1513216974.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:54.600Z,1513216974.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:54.997Z,1513216974.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:55.011Z,1513216975.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:55.396Z,1513216975.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:55.464Z,1513216975.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:55.775Z,1513216975.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:55.805Z,1513216975.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:56.175Z,1513216976.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:56.210Z,1513216976.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:56.582Z,1513216976.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:56.615Z,1513216976.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:56.997Z,1513216976.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:57.012Z,1513216977.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:57.375Z,1513216977.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:57.415Z,1513216977.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:57.822Z,1513216977.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:57.850Z,1513216977.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:58.206Z,1513216978.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:58.227Z,1513216978.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:58.599Z,1513216978.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:58.648Z,1513216978.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:58.975Z,1513216978.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:59.007Z,1513216979.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:59.396Z,1513216979.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:59.415Z,1513216979.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:02:59.781Z,1513216979.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:02:59.807Z,1513216979.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:00.172Z,1513216980.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:00.196Z,1513216980.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:00.585Z,1513216980.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:00.616Z,1513216980.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:00.998Z,1513216980.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:01.013Z,1513216981.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:01.402Z,1513216981.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:01.418Z,1513216981.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:01.815Z,1513216981.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:01.854Z,1513216981.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:02.175Z,1513216982.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:02.264Z,1513216982.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:02.579Z,1513216982.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:02.612Z,1513216982.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:02.979Z,1513216982.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:03.009Z,1513216983.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:03.379Z,1513216983.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:03.414Z,1513216983.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:03.786Z,1513216983.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:03.820Z,1513216983.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:04.199Z,1513216984.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:04.213Z,1513216984.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:04.603Z,1513216984.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:04.618Z,1513216984.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:05.029Z,1513216985.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:05.068Z,1513216985.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:05.374Z,1513216985.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:05.408Z,1513216985.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:05.780Z,1513216985.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:05.837Z,1513216985.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:06.181Z,1513216986.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:06.236Z,1513216986.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:06.602Z,1513216986.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:06.617Z,1513216986.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:10.288Z,1513216990.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:10.335Z,1513216990.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:10.454Z,1513216990.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:10.487Z,1513216990.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:10.811Z,1513216990.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:10.871Z,1513216990.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:11.253Z,1513216991.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:11.296Z,1513216991.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:11.603Z,1513216991.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:11.639Z,1513216991.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:12.010Z,1513216992.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:12.024Z,1513216992.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:12.421Z,1513216992.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:12.455Z,1513216992.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:12.811Z,1513216992.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:12.849Z,1513216992.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:13.276Z,1513216993.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:13.299Z,1513216993.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:13.609Z,1513216993.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:13.623Z,1513216993.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:14.007Z,1513216994.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:14.103Z,1513216994.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:14.410Z,1513216994.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:14.424Z,1513216994.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:14.812Z,1513216994.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:14.915Z,1513216994.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:15.196Z,1513216995.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:15.235Z,1513216995.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:15.624Z,1513216995.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:15.641Z,1513216995.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:16.024Z,1513216996.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:16.043Z,1513216996.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:16.414Z,1513216996.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:16.436Z,1513216996.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:16.857Z,1513216996.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:16.927Z,1513216996.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:17.196Z,1513216997.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:17.234Z,1513216997.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:17.634Z,1513216997.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:17.677Z,1513216997.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:18.003Z,1513216998.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:18.039Z,1513216998.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:18.413Z,1513216998.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:18.443Z,1513216998.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:18.813Z,1513216998.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:18.928Z,1513216998.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:19.222Z,1513216999.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:19.258Z,1513216999.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:19.616Z,1513216999.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:19.631Z,1513216999.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:20.012Z,1513217000.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:20.028Z,1513217000.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:20.418Z,1513217000.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:20.434Z,1513217000.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:20.902Z,1513217000.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:20.917Z,1513217000.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:21.217Z,1513217001.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:21.239Z,1513217001.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:21.615Z,1513217001.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:21.631Z,1513217001.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:22.017Z,1513217002.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:22.031Z,1513217002.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:22.416Z,1513217002.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:22.439Z,1513217002.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:22.822Z,1513217002.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:22.838Z,1513217002.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:23.224Z,1513217003.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:23.239Z,1513217003.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:23.610Z,1513217003.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:23.633Z,1513217003.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:24.010Z,1513217004.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:24.037Z,1513217004.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:24.426Z,1513217004.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:24.440Z,1513217004.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:24.830Z,1513217004.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:24.844Z,1513217004.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:25.278Z,1513217005.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:25.298Z,1513217005.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:25.603Z,1513217005.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:25.635Z,1513217005.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:26.007Z,1513217006.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:26.032Z,1513217006.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:26.404Z,1513217006.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:26.432Z,1513217006.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:26.805Z,1513217006.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:26.840Z,1513217006.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:27.276Z,1513217007.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:27.324Z,1513217007.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:27.620Z,1513217007.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:27.636Z,1513217007.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:28.024Z,1513217008.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:28.039Z,1513217008.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:28.422Z,1513217008.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:28.437Z,1513217008.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:28.825Z,1513217008.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:28.921Z,1513217008.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:29.217Z,1513217009.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:29.232Z,1513217009.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:29.616Z,1513217009.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:29.679Z,1513217009.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:30.002Z,1513217010.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:30.036Z,1513217010.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:30.425Z,1513217010.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:30.448Z,1513217010.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:30.870Z,1513217010.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:30.951Z,1513217010.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:31.218Z,1513217011.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:31.246Z,1513217011.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:31.610Z,1513217011.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:31.624Z,1513217011.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:32.003Z,1513217012.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:32.055Z,1513217012.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:32.417Z,1513217012.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:32.449Z,1513217012.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:32.832Z,1513217012.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:32.947Z,1513217012.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:33.226Z,1513217013.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:33.256Z,1513217013.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:33.631Z,1513217013.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:33.670Z,1513217013.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:34.013Z,1513217014.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:34.035Z,1513217014.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:34.423Z,1513217014.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:34.440Z,1513217014.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:34.844Z,1513217014.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:34.895Z,1513217014.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:35.219Z,1513217015.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:35.252Z,1513217015.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:35.607Z,1513217015.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:35.634Z,1513217015.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:36.004Z,1513217016.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:36.035Z,1513217016.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:36.415Z,1513217016.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:36.444Z,1513217016.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:36.844Z,1513217016.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:36.902Z,1513217016.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:37.221Z,1513217017.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:37.240Z,1513217017.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:37.608Z,1513217017.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:37.622Z,1513217017.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:38.008Z,1513217018.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:38.035Z,1513217018.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:38.422Z,1513217018.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:38.438Z,1513217018.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:38.822Z,1513217018.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:38.836Z,1513217018.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:39.255Z,1513217019.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:39.294Z,1513217019.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:39.614Z,1513217019.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:39.635Z,1513217019.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:40.003Z,1513217020.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:40.035Z,1513217020.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:40.396Z,1513217020.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:40.433Z,1513217020.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:40.820Z,1513217020.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:40.835Z,1513217020.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:41.242Z,1513217021.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:41.306Z,1513217021.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:41.622Z,1513217021.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:41.659Z,1513217021.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:42.043Z,1513217022.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:42.091Z,1513217022.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:42.421Z,1513217022.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:42.447Z,1513217022.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:42.827Z,1513217022.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:42.908Z,1513217022.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:43.207Z,1513217023.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:43.233Z,1513217023.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:43.604Z,1513217023.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:43.641Z,1513217023.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:44.023Z,1513217024.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:44.048Z,1513217024.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:44.413Z,1513217024.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:44.443Z,1513217024.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:44.864Z,1513217024.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:44.898Z,1513217024.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:45.218Z,1513217025.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:45.233Z,1513217025.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:45.618Z,1513217025.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:45.633Z,1513217025.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:46.012Z,1513217026.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:46.027Z,1513217026.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:46.414Z,1513217026.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:46.429Z,1513217026.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:46.858Z,1513217026.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:46.918Z,1513217026.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:47.233Z,1513217027.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:47.280Z,1513217027.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:47.615Z,1513217027.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:47.629Z,1513217027.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:48.006Z,1513217028.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:48.043Z,1513217028.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:48.426Z,1513217028.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:48.441Z,1513217028.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:48.835Z,1513217028.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:48.899Z,1513217028.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:49.222Z,1513217029.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:49.244Z,1513217029.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:49.617Z,1513217029.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:49.639Z,1513217029.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:50.003Z,1513217030.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:50.031Z,1513217030.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:50.450Z,1513217030.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:50.493Z,1513217030.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:50.826Z,1513217030.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:50.842Z,1513217030.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:51.226Z,1513217031.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:51.271Z,1513217031.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:51.611Z,1513217031.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:51.625Z,1513217031.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:52.013Z,1513217032.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:52.028Z,1513217032.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:52.427Z,1513217032.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:52.479Z,1513217032.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:52.825Z,1513217032.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:52.856Z,1513217032.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:53.294Z,1513217033.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:53.319Z,1513217033.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:53.626Z,1513217033.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:53.695Z,1513217033.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:54.003Z,1513217034.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:54.084Z,1513217034.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:54.403Z,1513217034.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:54.430Z,1513217034.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:54.808Z,1513217034.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:54.873Z,1513217034.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:55.250Z,1513217035.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:55.282Z,1513217035.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:55.625Z,1513217035.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:55.679Z,1513217035.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:56.017Z,1513217036.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:56.048Z,1513217036.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:56.421Z,1513217036.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:56.457Z,1513217036.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:56.805Z,1513217036.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:56.891Z,1513217036.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:57.203Z,1513217037.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:57.237Z,1513217037.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:57.603Z,1513217037.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:57.628Z,1513217037.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:58.003Z,1513217038.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:58.031Z,1513217038.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:58.422Z,1513217038.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:58.438Z,1513217038.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:58.863Z,1513217038.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:58.912Z,1513217038.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:59.217Z,1513217039.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:59.238Z,1513217039.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:03:59.610Z,1513217039.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:03:59.632Z,1513217039.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:00.010Z,1513217040.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:00.031Z,1513217040.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:00.422Z,1513217040.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:00.437Z,1513217040.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:00.872Z,1513217040.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:00.917Z,1513217040.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:01.227Z,1513217041.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:01.242Z,1513217041.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:01.613Z,1513217041.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:01.632Z,1513217041.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:02.000Z,1513217042.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:02.032Z,1513217042.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:02.424Z,1513217042.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:02.441Z,1513217042.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:02.881Z,1513217042.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:02.938Z,1513217042.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:03.228Z,1513217043.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:03.251Z,1513217043.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:03.630Z,1513217043.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:03.645Z,1513217043.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:04.012Z,1513217044.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:04.063Z,1513217044.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:04.432Z,1513217044.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:04.455Z,1513217044.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:04.837Z,1513217044.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:04.952Z,1513217044.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:05.224Z,1513217045.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:05.259Z,1513217045.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:05.611Z,1513217045.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:05.627Z,1513217045.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:06.012Z,1513217046.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:06.027Z,1513217046.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:06.443Z,1513217046.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:06.470Z,1513217046.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:06.818Z,1513217046.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:06.832Z,1513217046.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:10.456Z,1513217050.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:10.480Z,1513217050.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:10.581Z,1513217050.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:10.613Z,1513217050.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:10.967Z,1513217050.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:10.987Z,1513217050.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:11.359Z,1513217051.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:11.379Z,1513217051.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:11.765Z,1513217051.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:11.780Z,1513217051.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:12.170Z,1513217052.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:12.187Z,1513217052.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:12.574Z,1513217052.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:12.595Z,1513217052.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:12.000Z,1513217053.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:13.035Z,1513217053.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:13.370Z,1513217053.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:13.393Z,1513217053.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:13.770Z,1513217053.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:13.785Z,1513217053.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:14.169Z,1513217054.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:14.184Z,1513217054.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:14.566Z,1513217054.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:14.607Z,1513217054.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:14.971Z,1513217054.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:14.991Z,1513217054.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:15.360Z,1513217055.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:15.392Z,1513217055.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:15.777Z,1513217055.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:15.812Z,1513217055.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:16.188Z,1513217056.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:16.243Z,1513217056.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:16.568Z,1513217056.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:16.638Z,1513217056.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:16.961Z,1513217056.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:16.990Z,1513217056.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:17.361Z,1513217057.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:17.426Z,1513217057.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:17.804Z,1513217057.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:17.856Z,1513217057.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:18.162Z,1513217058.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:18.194Z,1513217058.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:18.583Z,1513217058.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:18.598Z,1513217058.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:18.994Z,1513217058.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:19.015Z,1513217059.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:19.390Z,1513217059.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:19.414Z,1513217059.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:19.785Z,1513217059.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:19.800Z,1513217059.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:20.163Z,1513217060.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:20.183Z,1513217060.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:20.565Z,1513217060.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:20.579Z,1513217060.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:20.966Z,1513217060.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:20.981Z,1513217060.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:21.375Z,1513217061.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:21.407Z,1513217061.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:21.778Z,1513217061.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:21.811Z,1513217061.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:22.178Z,1513217062.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:22.209Z,1513217062.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:22.618Z,1513217062.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:22.639Z,1513217062.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:22.969Z,1513217062.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:22.983Z,1513217062.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:23.370Z,1513217063.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:23.385Z,1513217063.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:23.769Z,1513217063.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:23.783Z,1513217063.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:24.168Z,1513217064.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:24.182Z,1513217064.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:24.579Z,1513217064.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:24.594Z,1513217064.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:24.972Z,1513217064.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:24.992Z,1513217064.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:25.374Z,1513217065.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:25.388Z,1513217065.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:25.768Z,1513217065.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:25.839Z,1513217065.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:26.175Z,1513217066.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:26.190Z,1513217066.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:26.571Z,1513217066.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:26.585Z,1513217066.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:26.969Z,1513217066.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:26.985Z,1513217066.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:27.371Z,1513217067.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:27.392Z,1513217067.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:27.778Z,1513217067.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:27.794Z,1513217067.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:28.174Z,1513217068.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:28.189Z,1513217068.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:28.574Z,1513217068.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:28.589Z,1513217068.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:28.960Z,1513217068.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:29.037Z,1513217069.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:29.372Z,1513217069.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:29.388Z,1513217069.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:29.780Z,1513217069.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:29.796Z,1513217069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:30.170Z,1513217070.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:30.184Z,1513217070.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:30.579Z,1513217070.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:30.599Z,1513217070.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:30.993Z,1513217070.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:31.022Z,1513217071.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:31.378Z,1513217071.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:31.400Z,1513217071.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:31.775Z,1513217071.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:31.789Z,1513217071.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:32.200Z,1513217072.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:32.232Z,1513217072.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:32.559Z,1513217072.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:32.591Z,1513217072.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:32.979Z,1513217072.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:33.004Z,1513217073.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:33.374Z,1513217073.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:33.390Z,1513217073.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:33.783Z,1513217073.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:33.798Z,1513217073.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:34.176Z,1513217074.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:34.204Z,1513217074.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:34.580Z,1513217074.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:34.596Z,1513217074.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:34.967Z,1513217074.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:34.995Z,1513217074.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:35.410Z,1513217075.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:35.457Z,1513217075.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:35.761Z,1513217075.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:35.770Z,1513217075.770 [BPC1](ERROR): Failed to parse message.
2017-12-14T02:04:35.770Z,1513217075.770 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:04:35.770Z,1513217075.770 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:04:35.770Z,1513217075.770 [BPC1](ERROR): Data Fault
2017-12-14T02:04:35.778Z,1513217075.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:35.825Z,1513217075.825 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:04:36.168Z,1513217076.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:36.183Z,1513217076.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:36.579Z,1513217076.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:36.611Z,1513217076.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:36.978Z,1513217076.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:37.010Z,1513217077.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:37.024Z,1513217077.024 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:04:37.024Z,1513217077.024 [BPC1] No Fault, FailCount= 1
2017-12-14T02:04:37.386Z,1513217077.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:37.459Z,1513217077.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:37.770Z,1513217077.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:37.784Z,1513217077.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:38.170Z,1513217078.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:38.185Z,1513217078.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:38.614Z,1513217078.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:38.636Z,1513217078.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:38.972Z,1513217078.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:39.009Z,1513217079.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:39.366Z,1513217079.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:39.391Z,1513217079.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:39.774Z,1513217079.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:39.795Z,1513217079.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:40.169Z,1513217080.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:40.184Z,1513217080.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:40.573Z,1513217080.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:40.596Z,1513217080.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:40.966Z,1513217080.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:40.983Z,1513217080.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:41.369Z,1513217081.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:41.384Z,1513217081.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:41.788Z,1513217081.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:41.812Z,1513217081.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:42.167Z,1513217082.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:42.183Z,1513217082.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:42.582Z,1513217082.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:42.597Z,1513217082.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:42.981Z,1513217082.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:43.003Z,1513217083.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:43.370Z,1513217083.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:43.399Z,1513217083.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:43.771Z,1513217083.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:43.785Z,1513217083.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:44.169Z,1513217084.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:44.184Z,1513217084.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:44.571Z,1513217084.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:44.591Z,1513217084.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:45.026Z,1513217085.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:45.044Z,1513217085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:45.360Z,1513217085.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:45.386Z,1513217085.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:45.778Z,1513217085.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:45.834Z,1513217085.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:46.185Z,1513217086.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:46.200Z,1513217086.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:46.577Z,1513217086.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:46.600Z,1513217086.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:46.984Z,1513217086.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:47.003Z,1513217087.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:47.369Z,1513217087.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:47.391Z,1513217087.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:47.774Z,1513217087.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:47.789Z,1513217087.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:48.183Z,1513217088.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:48.238Z,1513217088.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:48.577Z,1513217088.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:48.599Z,1513217088.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:48.981Z,1513217088.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:48.996Z,1513217088.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:49.377Z,1513217089.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:49.399Z,1513217089.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:49.758Z,1513217089.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:49.785Z,1513217089.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:50.174Z,1513217090.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:50.195Z,1513217090.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:50.559Z,1513217090.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:50.586Z,1513217090.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:50.970Z,1513217090.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:50.984Z,1513217090.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:51.397Z,1513217091.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:51.467Z,1513217091.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:51.792Z,1513217091.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:51.807Z,1513217091.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:52.186Z,1513217092.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:52.200Z,1513217092.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:52.586Z,1513217092.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:52.600Z,1513217092.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:52.981Z,1513217092.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:52.995Z,1513217092.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:53.358Z,1513217093.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:53.379Z,1513217093.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:53.762Z,1513217093.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:53.783Z,1513217093.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:54.163Z,1513217094.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:54.193Z,1513217094.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:54.579Z,1513217094.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:54.632Z,1513217094.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:54.981Z,1513217094.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:55.003Z,1513217095.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:55.378Z,1513217095.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:55.405Z,1513217095.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:55.760Z,1513217095.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:55.786Z,1513217095.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:56.155Z,1513217096.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:56.179Z,1513217096.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:56.559Z,1513217096.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:56.597Z,1513217096.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:56.960Z,1513217096.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:56.987Z,1513217096.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:57.360Z,1513217097.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:57.386Z,1513217097.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:57.812Z,1513217097.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:57.846Z,1513217097.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:58.179Z,1513217098.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:58.244Z,1513217098.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:58.581Z,1513217098.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:58.604Z,1513217098.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:58.958Z,1513217098.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:59.023Z,1513217099.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:59.359Z,1513217099.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:59.391Z,1513217099.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:04:59.775Z,1513217099.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:04:59.830Z,1513217099.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:00.160Z,1513217100.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:00.188Z,1513217100.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:00.582Z,1513217100.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:00.597Z,1513217100.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:00.999Z,1513217100.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:01.036Z,1513217101.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:01.368Z,1513217101.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:01.394Z,1513217101.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:01.762Z,1513217101.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:01.789Z,1513217101.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:02.161Z,1513217102.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:02.190Z,1513217102.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:02.563Z,1513217102.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:02.595Z,1513217102.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:02.960Z,1513217102.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:02.995Z,1513217102.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:03.378Z,1513217103.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:03.399Z,1513217103.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:03.782Z,1513217103.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:03.797Z,1513217103.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:04.195Z,1513217104.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:04.243Z,1513217104.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:04.577Z,1513217104.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:04.596Z,1513217104.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:04.960Z,1513217104.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:04.988Z,1513217104.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:05.359Z,1513217105.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:05.389Z,1513217105.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:05.762Z,1513217105.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:05.789Z,1513217105.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:06.168Z,1513217106.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:06.200Z,1513217106.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:06.587Z,1513217106.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:06.601Z,1513217106.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:06.990Z,1513217106.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:07.005Z,1513217107.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:10.452Z,1513217110.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:10.499Z,1513217110.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:10.629Z,1513217110.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:10.660Z,1513217110.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:10.976Z,1513217110.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:10.995Z,1513217110.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:11.372Z,1513217111.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:11.388Z,1513217111.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:11.759Z,1513217111.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:11.781Z,1513217111.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:12.164Z,1513217112.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:12.180Z,1513217112.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:12.572Z,1513217112.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:12.589Z,1513217112.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:12.970Z,1513217112.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:12.987Z,1513217112.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:13.374Z,1513217113.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:13.395Z,1513217113.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:13.761Z,1513217113.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:13.847Z,1513217113.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:14.162Z,1513217114.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:14.182Z,1513217114.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:14.565Z,1513217114.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:14.580Z,1513217114.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:14.966Z,1513217114.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:15.019Z,1513217115.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:15.361Z,1513217115.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:15.376Z,1513217115.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:15.774Z,1513217115.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:15.789Z,1513217115.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:16.175Z,1513217116.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:16.190Z,1513217116.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:16.574Z,1513217116.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:16.592Z,1513217116.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:16.992Z,1513217116.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:17.024Z,1513217117.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:17.349Z,1513217117.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:17.380Z,1513217117.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:17.764Z,1513217117.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:17.780Z,1513217117.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:18.152Z,1513217118.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:18.179Z,1513217118.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:18.574Z,1513217118.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:18.590Z,1513217118.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:18.977Z,1513217118.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:18.993Z,1513217118.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:19.373Z,1513217119.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:19.390Z,1513217119.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:19.752Z,1513217119.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:19.777Z,1513217119.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:20.200Z,1513217120.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:20.240Z,1513217120.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:20.549Z,1513217120.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:20.580Z,1513217120.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:20.953Z,1513217120.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:20.979Z,1513217120.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:21.350Z,1513217121.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:21.383Z,1513217121.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:21.774Z,1513217121.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:21.790Z,1513217121.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:22.176Z,1513217122.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:22.191Z,1513217122.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:22.570Z,1513217122.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:22.647Z,1513217122.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:22.952Z,1513217122.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:22.983Z,1513217122.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:23.397Z,1513217123.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:23.485Z,1513217123.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:23.751Z,1513217123.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:23.779Z,1513217123.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:24.151Z,1513217124.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:24.204Z,1513217124.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:24.575Z,1513217124.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:24.595Z,1513217124.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:24.974Z,1513217124.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:24.988Z,1513217124.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:25.360Z,1513217125.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:25.392Z,1513217125.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:25.758Z,1513217125.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:25.772Z,1513217125.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:26.145Z,1513217126.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:26.163Z,1513217126.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:26.577Z,1513217126.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:26.644Z,1513217126.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:26.645Z,1513217126.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2017-12-14T02:05:26.645Z,1513217126.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:05:26.669Z,1513217126.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:05:26.960Z,1513217126.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:26.978Z,1513217126.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:26.979Z,1513217126.979 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2017-12-14T02:05:26.979Z,1513217126.979 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:05:27.001Z,1513217127.001 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:27.001Z,1513217127.001 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2017-12-14T02:05:27.001Z,1513217127.001 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:05:27.024Z,1513217127.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:05:27.024Z,1513217127.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2017-12-14T02:05:27.024Z,1513217127.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:05:27.025Z,1513217127.025 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:05:27.362Z,1513217127.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:27.384Z,1513217127.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:05:27.384Z,1513217127.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:05:27.384Z,1513217127.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:05:27.409Z,1513217127.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:05:27.409Z,1513217127.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2017-12-14T02:05:27.409Z,1513217127.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:05:27.410Z,1513217127.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2017-12-14T02:05:27.769Z,1513217127.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:27.784Z,1513217127.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:27.784Z,1513217127.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:05:27.785Z,1513217127.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:05:27.785Z,1513217127.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:05:27.786Z,1513217127.786 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:05:27.786Z,1513217127.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:05:27.786Z,1513217127.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:05:28.169Z,1513217128.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:28.183Z,1513217128.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:28.570Z,1513217128.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:28.596Z,1513217128.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:28.975Z,1513217128.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:29.017Z,1513217129.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:29.352Z,1513217129.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:29.387Z,1513217129.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:29.778Z,1513217129.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:29.806Z,1513217129.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:30.162Z,1513217130.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:30.185Z,1513217130.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:30.559Z,1513217130.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:30.594Z,1513217130.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:30.975Z,1513217130.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:30.990Z,1513217130.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:31.376Z,1513217131.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:31.392Z,1513217131.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:31.758Z,1513217131.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:31.784Z,1513217131.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:32.153Z,1513217132.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:32.171Z,1513217132.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:32.561Z,1513217132.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:32.607Z,1513217132.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:32.996Z,1513217132.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:33.052Z,1513217133.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:33.361Z,1513217133.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:33.397Z,1513217133.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:33.769Z,1513217133.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:33.793Z,1513217133.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:34.173Z,1513217134.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:34.199Z,1513217134.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:34.570Z,1513217134.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:34.596Z,1513217134.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:34.964Z,1513217134.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:34.999Z,1513217134.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:35.356Z,1513217135.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:35.387Z,1513217135.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:35.759Z,1513217135.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:35.775Z,1513217135.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:36.198Z,1513217136.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:36.230Z,1513217136.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:36.572Z,1513217136.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:36.587Z,1513217136.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:36.967Z,1513217136.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:36.991Z,1513217136.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:37.369Z,1513217137.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:37.391Z,1513217137.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:37.763Z,1513217137.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:37.777Z,1513217137.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:38.153Z,1513217138.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:38.181Z,1513217138.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:38.564Z,1513217138.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:38.579Z,1513217138.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:38.969Z,1513217138.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:38.983Z,1513217138.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:39.393Z,1513217139.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:39.423Z,1513217139.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:39.769Z,1513217139.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:39.785Z,1513217139.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:40.170Z,1513217140.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:40.184Z,1513217140.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:40.573Z,1513217140.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:40.588Z,1513217140.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:40.952Z,1513217140.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:40.978Z,1513217140.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:41.349Z,1513217141.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:41.387Z,1513217141.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:41.764Z,1513217141.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:41.780Z,1513217141.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:42.152Z,1513217142.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:42.177Z,1513217142.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:42.624Z,1513217142.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:42.674Z,1513217142.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:42.980Z,1513217142.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:42.999Z,1513217142.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:43.366Z,1513217143.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:43.393Z,1513217143.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:43.753Z,1513217143.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:43.784Z,1513217143.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:44.155Z,1513217144.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:44.187Z,1513217144.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:44.550Z,1513217144.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:44.607Z,1513217144.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:44.951Z,1513217144.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:45.012Z,1513217145.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:45.353Z,1513217145.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:45.384Z,1513217145.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:45.791Z,1513217145.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:45.843Z,1513217145.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:46.166Z,1513217146.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:46.199Z,1513217146.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:46.563Z,1513217146.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:46.629Z,1513217146.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:46.959Z,1513217146.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:46.992Z,1513217146.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:47.359Z,1513217147.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:47.387Z,1513217147.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:47.754Z,1513217147.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:47.786Z,1513217147.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:48.157Z,1513217148.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:48.172Z,1513217148.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:48.571Z,1513217148.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:48.597Z,1513217148.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:48.996Z,1513217148.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:49.015Z,1513217149.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:49.393Z,1513217149.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:49.408Z,1513217149.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:49.758Z,1513217149.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:49.794Z,1513217149.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:50.156Z,1513217150.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:50.174Z,1513217150.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:50.562Z,1513217150.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:50.576Z,1513217150.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:50.963Z,1513217150.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:50.977Z,1513217150.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:51.366Z,1513217151.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:51.381Z,1513217151.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:51.775Z,1513217151.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:51.810Z,1513217151.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:52.204Z,1513217152.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:52.236Z,1513217152.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:52.572Z,1513217152.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:52.599Z,1513217152.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:52.961Z,1513217152.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:52.980Z,1513217152.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:53.363Z,1513217153.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:53.380Z,1513217153.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:53.763Z,1513217153.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:53.778Z,1513217153.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:54.161Z,1513217154.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:54.183Z,1513217154.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:54.569Z,1513217154.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:54.584Z,1513217154.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:54.969Z,1513217154.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:55.018Z,1513217155.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:55.384Z,1513217155.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:55.427Z,1513217155.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:55.749Z,1513217155.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:55.779Z,1513217155.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:56.154Z,1513217156.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:56.176Z,1513217156.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:56.560Z,1513217156.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:56.574Z,1513217156.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:56.974Z,1513217156.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:56.988Z,1513217156.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:57.355Z,1513217157.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:57.386Z,1513217157.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:57.770Z,1513217157.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:57.791Z,1513217157.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:58.170Z,1513217158.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:58.185Z,1513217158.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:58.590Z,1513217158.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:58.626Z,1513217158.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:58.970Z,1513217158.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:58.985Z,1513217158.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:59.362Z,1513217159.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:59.383Z,1513217159.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:05:59.758Z,1513217159.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:05:59.779Z,1513217159.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:00.164Z,1513217160.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:00.178Z,1513217160.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:00.575Z,1513217160.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:00.595Z,1513217160.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:00.967Z,1513217160.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:00.984Z,1513217160.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:01.372Z,1513217161.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:01.391Z,1513217161.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:01.752Z,1513217161.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:01.846Z,1513217161.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:02.168Z,1513217162.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:02.187Z,1513217162.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:02.549Z,1513217162.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:02.575Z,1513217162.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:02.951Z,1513217162.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:02.987Z,1513217162.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:03.363Z,1513217163.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:03.379Z,1513217163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:03.770Z,1513217163.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:03.784Z,1513217163.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:04.174Z,1513217164.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:04.189Z,1513217164.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:04.570Z,1513217164.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:04.585Z,1513217164.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:04.996Z,1513217164.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:05.047Z,1513217165.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:05.352Z,1513217165.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:05.382Z,1513217165.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:05.764Z,1513217165.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:05.779Z,1513217165.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:06.150Z,1513217166.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:06.175Z,1513217166.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:06.575Z,1513217166.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:06.595Z,1513217166.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:06.978Z,1513217166.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:07.058Z,1513217167.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:07.370Z,1513217167.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:07.385Z,1513217167.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:10.842Z,1513217170.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:10.946Z,1513217170.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:11.036Z,1513217171.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:11.063Z,1513217171.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:11.437Z,1513217171.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:11.488Z,1513217171.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:11.843Z,1513217171.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:11.863Z,1513217171.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:12.218Z,1513217172.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:12.255Z,1513217172.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:12.622Z,1513217172.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:12.640Z,1513217172.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:13.020Z,1513217173.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:13.034Z,1513217173.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:13.425Z,1513217173.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:13.439Z,1513217173.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:13.826Z,1513217173.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:13.841Z,1513217173.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:14.226Z,1513217174.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:14.247Z,1513217174.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:14.622Z,1513217174.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:14.650Z,1513217174.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:15.018Z,1513217175.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:15.039Z,1513217175.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:15.429Z,1513217175.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:15.443Z,1513217175.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:15.829Z,1513217175.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:15.844Z,1513217175.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:16.230Z,1513217176.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:16.245Z,1513217176.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:16.620Z,1513217176.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:16.635Z,1513217176.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:17.018Z,1513217177.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:17.033Z,1513217177.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:17.424Z,1513217177.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:17.450Z,1513217177.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:17.830Z,1513217177.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:17.916Z,1513217177.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:18.244Z,1513217178.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:18.279Z,1513217178.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:18.613Z,1513217178.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:18.648Z,1513217178.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:19.012Z,1513217179.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:19.045Z,1513217179.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:19.433Z,1513217179.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:19.456Z,1513217179.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:19.850Z,1513217179.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:19.967Z,1513217179.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:20.234Z,1513217180.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:20.263Z,1513217180.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:20.616Z,1513217180.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:20.661Z,1513217180.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:21.012Z,1513217181.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:21.087Z,1513217181.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:21.424Z,1513217181.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:21.466Z,1513217181.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:21.828Z,1513217181.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:21.863Z,1513217181.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:22.240Z,1513217182.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:22.287Z,1513217182.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:22.614Z,1513217182.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:22.688Z,1513217182.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:23.009Z,1513217183.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:23.052Z,1513217183.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:23.432Z,1513217183.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:23.463Z,1513217183.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:23.836Z,1513217183.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:23.856Z,1513217183.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:24.234Z,1513217184.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:24.261Z,1513217184.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:24.613Z,1513217184.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:24.652Z,1513217184.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:25.059Z,1513217185.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:25.099Z,1513217185.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:25.459Z,1513217185.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:25.476Z,1513217185.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:25.844Z,1513217185.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:25.878Z,1513217185.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:26.225Z,1513217186.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:26.260Z,1513217186.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:26.619Z,1513217186.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:26.655Z,1513217186.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:27.065Z,1513217187.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:27.085Z,1513217187.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:27.470Z,1513217187.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:27.492Z,1513217187.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:27.846Z,1513217187.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:27.861Z,1513217187.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:28.292Z,1513217188.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:28.319Z,1513217188.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:28.632Z,1513217188.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:28.654Z,1513217188.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:29.033Z,1513217189.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:29.060Z,1513217189.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:29.441Z,1513217189.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:29.476Z,1513217189.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:29.814Z,1513217189.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:29.866Z,1513217189.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:30.216Z,1513217190.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:30.276Z,1513217190.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:30.632Z,1513217190.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:30.670Z,1513217190.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:31.049Z,1513217191.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:31.077Z,1513217191.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:31.448Z,1513217191.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:31.515Z,1513217191.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:31.814Z,1513217191.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:31.991Z,1513217191.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:32.222Z,1513217192.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:32.287Z,1513217192.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:32.617Z,1513217192.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:32.698Z,1513217192.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:33.017Z,1513217193.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:33.061Z,1513217193.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:33.453Z,1513217193.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:33.518Z,1513217193.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:33.832Z,1513217193.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:33.864Z,1513217193.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:34.258Z,1513217194.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:34.322Z,1513217194.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:34.627Z,1513217194.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:34.667Z,1513217194.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:35.021Z,1513217195.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:35.081Z,1513217195.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:35.439Z,1513217195.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:35.465Z,1513217195.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:35.829Z,1513217195.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:35.853Z,1513217195.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:36.222Z,1513217196.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:36.238Z,1513217196.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:36.621Z,1513217196.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:36.635Z,1513217196.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:37.019Z,1513217197.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:37.039Z,1513217197.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:37.425Z,1513217197.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:37.440Z,1513217197.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:37.854Z,1513217197.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:37.895Z,1513217197.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:38.228Z,1513217198.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:38.319Z,1513217198.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:38.620Z,1513217198.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:38.651Z,1513217198.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:39.011Z,1513217199.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:39.032Z,1513217199.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:39.429Z,1513217199.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:39.464Z,1513217199.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:39.826Z,1513217199.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:39.840Z,1513217199.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:40.225Z,1513217200.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:40.263Z,1513217200.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:40.618Z,1513217200.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:40.633Z,1513217200.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:41.021Z,1513217201.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:41.036Z,1513217201.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:41.508Z,1513217201.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:41.563Z,1513217201.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:41.825Z,1513217201.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:41.840Z,1513217201.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:42.230Z,1513217202.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:42.244Z,1513217202.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:42.622Z,1513217202.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:42.637Z,1513217202.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:43.021Z,1513217203.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:43.035Z,1513217203.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:43.423Z,1513217203.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:43.439Z,1513217203.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:43.830Z,1513217203.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:43.845Z,1513217203.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:44.226Z,1513217204.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:44.271Z,1513217204.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:44.623Z,1513217204.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:44.638Z,1513217204.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:45.019Z,1513217205.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:45.039Z,1513217205.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:45.426Z,1513217205.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:45.445Z,1513217205.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:45.827Z,1513217205.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:45.842Z,1513217205.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:46.225Z,1513217206.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:46.244Z,1513217206.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:46.621Z,1513217206.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:46.635Z,1513217206.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:47.019Z,1513217207.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:47.039Z,1513217207.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:47.423Z,1513217207.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:47.443Z,1513217207.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:47.826Z,1513217207.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:47.841Z,1513217207.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:48.224Z,1513217208.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:48.244Z,1513217208.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:48.620Z,1513217208.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:48.634Z,1513217208.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:49.020Z,1513217209.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:49.039Z,1513217209.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:49.429Z,1513217209.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:49.451Z,1513217209.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:49.828Z,1513217209.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:49.843Z,1513217209.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:50.230Z,1513217210.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:50.251Z,1513217210.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:50.615Z,1513217210.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:50.636Z,1513217210.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:51.018Z,1513217211.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:51.083Z,1513217211.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:51.429Z,1513217211.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:51.450Z,1513217211.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:51.830Z,1513217211.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:51.845Z,1513217211.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:52.237Z,1513217212.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:52.252Z,1513217212.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:52.620Z,1513217212.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:52.636Z,1513217212.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:53.018Z,1513217213.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:53.033Z,1513217213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:53.425Z,1513217213.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:53.510Z,1513217213.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:53.838Z,1513217213.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:53.853Z,1513217213.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:54.224Z,1513217214.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:54.264Z,1513217214.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:54.616Z,1513217214.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:54.663Z,1513217214.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:55.013Z,1513217215.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:55.028Z,1513217215.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:55.429Z,1513217215.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:55.483Z,1513217215.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:55.830Z,1513217215.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:55.855Z,1513217215.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:56.226Z,1513217216.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:56.256Z,1513217216.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:56.401Z,1513217216.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:56.616Z,1513217216.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:56.632Z,1513217216.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:57.017Z,1513217217.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:57.040Z,1513217217.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:57.199Z,1513217217.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:57.470Z,1513217217.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:57.491Z,1513217217.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:57.613Z,1513217217.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:57.828Z,1513217217.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:57.843Z,1513217217.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:58.229Z,1513217218.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:58.243Z,1513217218.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:58.626Z,1513217218.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:58.641Z,1513217218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:59.018Z,1513217219.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:59.034Z,1513217219.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:59.394Z,1513217219.394 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T02:06:59.394Z,1513217219.394 [NAL9602] Data Fault, FailCount= 4
2017-12-14T02:06:59.394Z,1513217219.394 [NAL9602](ERROR): Data Fault
2017-12-14T02:06:59.414Z,1513217219.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:59.452Z,1513217219.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:06:59.482Z,1513217219.482 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T02:06:59.798Z,1513217219.798 [NAL9602](INFO): Powering down
2017-12-14T02:06:59.824Z,1513217219.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:06:59.846Z,1513217219.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:00.244Z,1513217220.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:00.279Z,1513217220.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:00.649Z,1513217220.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:00.683Z,1513217220.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:00.697Z,1513217220.697 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T02:07:00.697Z,1513217220.697 [NAL9602] No Fault, FailCount= 4
2017-12-14T02:07:01.017Z,1513217221.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:01.041Z,1513217221.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:01.412Z,1513217221.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:01.446Z,1513217221.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:01.819Z,1513217221.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:01.833Z,1513217221.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:02.219Z,1513217222.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:02.234Z,1513217222.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:02.618Z,1513217222.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:02.633Z,1513217222.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:03.019Z,1513217223.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:03.081Z,1513217223.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:03.415Z,1513217223.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:03.438Z,1513217223.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:03.862Z,1513217223.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:03.952Z,1513217223.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:04.222Z,1513217224.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:04.236Z,1513217224.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:04.623Z,1513217224.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:04.638Z,1513217224.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:05.019Z,1513217225.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:05.034Z,1513217225.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:05.423Z,1513217225.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:05.438Z,1513217225.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:05.824Z,1513217225.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:05.843Z,1513217225.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:06.222Z,1513217226.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:06.237Z,1513217226.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:06.240Z,1513217226.240 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:07:06.240Z,1513217226.240 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:07:06.241Z,1513217226.241 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:07:06.241Z,1513217226.241 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:07:06.620Z,1513217226.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:06.635Z,1513217226.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:06.639Z,1513217226.639 [Default:CheckIn:D] Stopped
2017-12-14T02:07:06.639Z,1513217226.639 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:07:07.034Z,1513217227.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:07.066Z,1513217227.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:07.077Z,1513217227.077 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.854150 min 
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn:E] Stopped
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn] Stopped
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn](INFO): Running loop #10
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn] Running Loop=10
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:07:07.078Z,1513217227.078 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:07:07.412Z,1513217227.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:07.443Z,1513217227.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:10.414Z,1513217230.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:10.964Z,1513217230.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:10.991Z,1513217230.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:11.093Z,1513217231.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:11.136Z,1513217231.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:11.212Z,1513217231.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:11.455Z,1513217231.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:11.472Z,1513217231.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:11.621Z,1513217231.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:11.853Z,1513217231.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:11.867Z,1513217231.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:12.252Z,1513217232.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:12.330Z,1513217232.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:12.650Z,1513217232.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:12.664Z,1513217232.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:13.057Z,1513217233.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:13.072Z,1513217233.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:13.458Z,1513217233.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:13.478Z,1513217233.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:13.848Z,1513217233.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:13.871Z,1513217233.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:14.325Z,1513217234.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:14.356Z,1513217234.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:14.650Z,1513217234.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:14.666Z,1513217234.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:15.051Z,1513217235.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:15.067Z,1513217235.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:15.452Z,1513217235.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:15.467Z,1513217235.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:15.849Z,1513217235.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:15.911Z,1513217235.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:16.250Z,1513217236.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:16.284Z,1513217236.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:16.651Z,1513217236.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:16.666Z,1513217236.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:17.038Z,1513217237.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:17.065Z,1513217237.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:17.438Z,1513217237.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:17.491Z,1513217237.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:17.839Z,1513217237.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:17.870Z,1513217237.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:18.243Z,1513217238.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:18.310Z,1513217238.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:18.638Z,1513217238.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:18.665Z,1513217238.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:19.038Z,1513217239.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:19.067Z,1513217239.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:19.442Z,1513217239.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:19.467Z,1513217239.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:19.838Z,1513217239.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:19.863Z,1513217239.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:20.236Z,1513217240.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:20.263Z,1513217240.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:20.646Z,1513217240.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:20.661Z,1513217240.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:21.045Z,1513217241.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:21.061Z,1513217241.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:21.449Z,1513217241.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:21.463Z,1513217241.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:21.850Z,1513217241.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:21.865Z,1513217241.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:22.246Z,1513217242.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:22.270Z,1513217242.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:22.644Z,1513217242.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:22.659Z,1513217242.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:23.048Z,1513217243.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:23.067Z,1513217243.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:23.499Z,1513217243.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:23.532Z,1513217243.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:23.832Z,1513217243.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:23.864Z,1513217243.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:24.250Z,1513217244.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:24.265Z,1513217244.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:24.646Z,1513217244.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:24.667Z,1513217244.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:25.051Z,1513217245.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:25.065Z,1513217245.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:25.441Z,1513217245.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:25.464Z,1513217245.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:25.845Z,1513217245.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:25.861Z,1513217245.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:26.243Z,1513217246.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:26.257Z,1513217246.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:26.699Z,1513217246.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:26.764Z,1513217246.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:27.038Z,1513217247.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:27.079Z,1513217247.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:27.440Z,1513217247.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:27.455Z,1513217247.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:27.843Z,1513217247.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:27.874Z,1513217247.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:28.238Z,1513217248.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:28.252Z,1513217248.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:28.644Z,1513217248.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:28.659Z,1513217248.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:29.037Z,1513217249.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:29.082Z,1513217249.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:29.438Z,1513217249.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:29.471Z,1513217249.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:29.820Z,1513217249.820 [NAL9602](INFO): Powering up NAL9602
2017-12-14T02:07:29.838Z,1513217249.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:29.872Z,1513217249.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:30.249Z,1513217250.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:30.264Z,1513217250.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:30.647Z,1513217250.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:30.662Z,1513217250.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:31.048Z,1513217251.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:31.062Z,1513217251.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:31.450Z,1513217251.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:31.471Z,1513217251.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:31.848Z,1513217251.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:31.862Z,1513217251.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:32.241Z,1513217252.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:32.255Z,1513217252.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:32.649Z,1513217252.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:32.664Z,1513217252.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:33.097Z,1513217253.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:33.151Z,1513217253.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:33.442Z,1513217253.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:33.456Z,1513217253.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:33.844Z,1513217253.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:33.872Z,1513217253.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:34.251Z,1513217254.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:34.266Z,1513217254.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:34.652Z,1513217254.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:34.667Z,1513217254.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:35.057Z,1513217255.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:35.072Z,1513217255.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:35.440Z,1513217255.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:35.467Z,1513217255.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:35.846Z,1513217255.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:35.863Z,1513217255.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:36.265Z,1513217256.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:36.308Z,1513217256.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:36.648Z,1513217256.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:36.663Z,1513217256.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:37.051Z,1513217257.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:37.066Z,1513217257.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:37.442Z,1513217257.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:37.469Z,1513217257.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:37.851Z,1513217257.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:37.866Z,1513217257.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:38.238Z,1513217258.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:38.271Z,1513217258.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:38.638Z,1513217258.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:38.722Z,1513217258.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:39.039Z,1513217259.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:39.063Z,1513217259.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:39.470Z,1513217259.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:39.527Z,1513217259.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:39.865Z,1513217259.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:39.915Z,1513217259.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:40.259Z,1513217260.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:40.273Z,1513217260.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:40.405Z,1513217260.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:40.622Z,1513217260.622 [NAL9602](INFO): NAL9602 initialized
2017-12-14T02:07:40.639Z,1513217260.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:40.706Z,1513217260.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:41.039Z,1513217261.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:41.063Z,1513217261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:41.202Z,1513217261.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:41.470Z,1513217261.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:41.491Z,1513217261.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:41.605Z,1513217261.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:41.857Z,1513217261.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:41.872Z,1513217261.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:42.266Z,1513217262.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:42.280Z,1513217262.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:42.402Z,1513217262.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:42.692Z,1513217262.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:42.763Z,1513217262.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:43.047Z,1513217263.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:43.067Z,1513217263.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:43.197Z,1513217263.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:43.457Z,1513217263.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:43.479Z,1513217263.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:43.601Z,1513217263.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:43.852Z,1513217263.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:43.867Z,1513217263.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:44.258Z,1513217264.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:44.283Z,1513217264.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:44.397Z,1513217264.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:44.663Z,1513217264.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:44.678Z,1513217264.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:45.059Z,1513217265.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:45.079Z,1513217265.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:45.196Z,1513217265.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:45.457Z,1513217265.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:45.473Z,1513217265.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:45.601Z,1513217265.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:45.839Z,1513217265.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:45.864Z,1513217265.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:46.261Z,1513217266.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:46.276Z,1513217266.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:46.399Z,1513217266.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:46.640Z,1513217266.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:46.668Z,1513217266.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:47.060Z,1513217267.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:47.075Z,1513217267.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:47.193Z,1513217267.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:47.459Z,1513217267.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:47.486Z,1513217267.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:47.597Z,1513217267.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:47.864Z,1513217267.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:47.887Z,1513217267.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:48.243Z,1513217268.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:48.270Z,1513217268.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:48.393Z,1513217268.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:48.639Z,1513217268.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:48.672Z,1513217268.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:49.044Z,1513217269.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:49.122Z,1513217269.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:49.190Z,1513217269.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:49.448Z,1513217269.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:49.483Z,1513217269.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:49.593Z,1513217269.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:49.865Z,1513217269.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:49.887Z,1513217269.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:50.250Z,1513217270.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:50.279Z,1513217270.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:50.389Z,1513217270.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:50.645Z,1513217270.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:50.660Z,1513217270.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:51.047Z,1513217271.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:51.062Z,1513217271.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:51.186Z,1513217271.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:51.450Z,1513217271.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:51.465Z,1513217271.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:51.629Z,1513217271.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:51.848Z,1513217271.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:51.862Z,1513217271.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:52.271Z,1513217272.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:52.312Z,1513217272.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:52.425Z,1513217272.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:52.661Z,1513217272.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:52.676Z,1513217272.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:53.057Z,1513217273.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:53.073Z,1513217273.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:53.222Z,1513217273.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:53.460Z,1513217273.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:53.475Z,1513217273.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:53.625Z,1513217273.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:53.842Z,1513217273.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:53.867Z,1513217273.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:54.248Z,1513217274.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:54.264Z,1513217274.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:54.421Z,1513217274.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:54.643Z,1513217274.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:54.678Z,1513217274.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:55.047Z,1513217275.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:55.063Z,1513217275.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:55.217Z,1513217275.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:55.458Z,1513217275.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:55.487Z,1513217275.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:55.622Z,1513217275.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:55.861Z,1513217275.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:55.879Z,1513217275.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:56.262Z,1513217276.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:56.276Z,1513217276.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:56.417Z,1513217276.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:56.655Z,1513217276.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:56.670Z,1513217276.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:57.040Z,1513217277.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:57.066Z,1513217277.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:57.213Z,1513217277.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:57.440Z,1513217277.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:57.468Z,1513217277.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:57.617Z,1513217277.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:57.838Z,1513217277.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:57.865Z,1513217277.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:58.262Z,1513217278.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:58.277Z,1513217278.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:58.413Z,1513217278.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:58.666Z,1513217278.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:58.687Z,1513217278.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:59.070Z,1513217279.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:59.085Z,1513217279.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:59.209Z,1513217279.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:59.439Z,1513217279.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:59.479Z,1513217279.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:07:59.613Z,1513217279.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:59.842Z,1513217279.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:07:59.880Z,1513217279.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:00.242Z,1513217280.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:00.279Z,1513217280.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:00.409Z,1513217280.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:00.643Z,1513217280.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:00.658Z,1513217280.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:01.055Z,1513217281.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:01.114Z,1513217281.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:01.206Z,1513217281.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:01.461Z,1513217281.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:01.488Z,1513217281.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:01.609Z,1513217281.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:01.858Z,1513217281.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:01.908Z,1513217281.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:02.252Z,1513217282.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:02.302Z,1513217282.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:02.405Z,1513217282.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:02.638Z,1513217282.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:02.690Z,1513217282.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:03.038Z,1513217283.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:03.074Z,1513217283.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:03.202Z,1513217283.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:03.439Z,1513217283.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:03.487Z,1513217283.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:03.605Z,1513217283.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:03.843Z,1513217283.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:03.870Z,1513217283.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:04.259Z,1513217284.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:04.274Z,1513217284.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:04.401Z,1513217284.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:04.666Z,1513217284.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:04.687Z,1513217284.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:05.061Z,1513217285.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:05.116Z,1513217285.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:05.200Z,1513217285.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:05.449Z,1513217285.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:05.464Z,1513217285.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:05.625Z,1513217285.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:05.844Z,1513217285.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:05.863Z,1513217285.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:06.249Z,1513217286.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:06.263Z,1513217286.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:06.423Z,1513217286.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:06.643Z,1513217286.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:06.670Z,1513217286.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:07.050Z,1513217287.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:07.068Z,1513217287.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:07.218Z,1513217287.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:07.448Z,1513217287.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:07.463Z,1513217287.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:07.624Z,1513217287.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:08.424Z,1513217288.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:09.217Z,1513217289.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:09.623Z,1513217289.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:10.417Z,1513217290.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:10.903Z,1513217290.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:10.950Z,1513217290.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:11.035Z,1513217291.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:11.050Z,1513217291.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:11.213Z,1513217291.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:11.415Z,1513217291.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:11.439Z,1513217291.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:11.618Z,1513217291.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:11.819Z,1513217291.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:11.868Z,1513217291.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:12.209Z,1513217292.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:12.236Z,1513217292.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:12.413Z,1513217292.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:12.632Z,1513217292.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:12.647Z,1513217292.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:13.017Z,1513217293.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:13.051Z,1513217293.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:13.209Z,1513217293.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:13.404Z,1513217293.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:13.420Z,1513217293.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:13.613Z,1513217293.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:13.817Z,1513217293.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:13.899Z,1513217293.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:14.210Z,1513217294.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:14.246Z,1513217294.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:14.409Z,1513217294.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:14.601Z,1513217294.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:14.640Z,1513217294.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:15.015Z,1513217295.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:15.051Z,1513217295.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:15.205Z,1513217295.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:15.425Z,1513217295.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:15.454Z,1513217295.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:15.609Z,1513217295.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:15.811Z,1513217295.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:15.825Z,1513217295.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:16.213Z,1513217296.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:16.229Z,1513217296.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:16.405Z,1513217296.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:16.606Z,1513217296.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:16.627Z,1513217296.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:17.009Z,1513217297.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:17.024Z,1513217297.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:17.201Z,1513217297.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:17.408Z,1513217297.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:17.435Z,1513217297.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:17.605Z,1513217297.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:17.854Z,1513217297.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:17.903Z,1513217297.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:18.213Z,1513217298.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:18.235Z,1513217298.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:18.401Z,1513217298.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:18.613Z,1513217298.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:18.628Z,1513217298.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:19.014Z,1513217299.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:19.029Z,1513217299.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:19.199Z,1513217299.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:19.408Z,1513217299.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:19.428Z,1513217299.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:19.613Z,1513217299.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:19.814Z,1513217299.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:19.835Z,1513217299.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:20.212Z,1513217300.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:20.228Z,1513217300.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:20.409Z,1513217300.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:20.613Z,1513217300.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:20.628Z,1513217300.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:21.029Z,1513217301.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:21.068Z,1513217301.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:21.207Z,1513217301.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:21.424Z,1513217301.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:21.439Z,1513217301.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:21.629Z,1513217301.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:21.828Z,1513217301.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:21.843Z,1513217301.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:22.223Z,1513217302.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:22.238Z,1513217302.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:22.425Z,1513217302.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:22.600Z,1513217302.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:22.637Z,1513217302.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:23.005Z,1513217303.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:23.031Z,1513217303.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:23.221Z,1513217303.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:23.399Z,1513217303.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:23.455Z,1513217303.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:23.625Z,1513217303.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:23.799Z,1513217303.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:23.864Z,1513217303.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:24.210Z,1513217304.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:24.243Z,1513217304.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:24.422Z,1513217304.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:24.614Z,1513217304.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:24.663Z,1513217304.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:25.014Z,1513217305.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:25.046Z,1513217305.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:25.217Z,1513217305.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:25.407Z,1513217305.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:25.463Z,1513217305.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:25.621Z,1513217305.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:25.804Z,1513217305.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:25.818Z,1513217305.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:26.203Z,1513217306.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:26.218Z,1513217306.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:26.417Z,1513217306.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:26.605Z,1513217306.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:26.620Z,1513217306.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:27.008Z,1513217307.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:27.023Z,1513217307.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:27.213Z,1513217307.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:27.416Z,1513217307.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:27.449Z,1513217307.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:27.449Z,1513217307.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2017-12-14T02:08:27.449Z,1513217307.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:08:27.495Z,1513217307.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:08:27.617Z,1513217307.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:27.816Z,1513217307.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:27.836Z,1513217307.836 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:27.836Z,1513217307.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2017-12-14T02:08:27.836Z,1513217307.836 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:08:27.838Z,1513217307.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:27.838Z,1513217307.838 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2017-12-14T02:08:27.838Z,1513217307.838 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:08:27.886Z,1513217307.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:08:27.886Z,1513217307.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2017-12-14T02:08:27.887Z,1513217307.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:08:27.887Z,1513217307.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:08:28.216Z,1513217308.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:28.229Z,1513217308.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:08:28.230Z,1513217308.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:08:28.230Z,1513217308.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:08:28.241Z,1513217308.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:08:28.241Z,1513217308.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2017-12-14T02:08:28.242Z,1513217308.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:08:28.242Z,1513217308.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2017-12-14T02:08:28.413Z,1513217308.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:28.613Z,1513217308.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:28.627Z,1513217308.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:28.628Z,1513217308.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:08:28.628Z,1513217308.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:08:28.629Z,1513217308.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:08:28.630Z,1513217308.630 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:08:28.630Z,1513217308.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:08:28.631Z,1513217308.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:08:28.999Z,1513217308.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:29.026Z,1513217309.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:29.209Z,1513217309.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:29.398Z,1513217309.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:29.432Z,1513217309.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:29.613Z,1513217309.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:29.799Z,1513217309.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:29.831Z,1513217309.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:30.214Z,1513217310.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:30.236Z,1513217310.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:30.409Z,1513217310.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:30.645Z,1513217310.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:30.681Z,1513217310.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:31.016Z,1513217311.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:31.052Z,1513217311.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:31.206Z,1513217311.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:31.408Z,1513217311.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:31.441Z,1513217311.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:31.609Z,1513217311.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:31.805Z,1513217311.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:31.820Z,1513217311.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:32.211Z,1513217312.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:32.225Z,1513217312.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:32.405Z,1513217312.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:32.611Z,1513217312.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:32.626Z,1513217312.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:33.008Z,1513217313.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:33.022Z,1513217313.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:33.203Z,1513217313.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:33.430Z,1513217313.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:33.460Z,1513217313.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:33.609Z,1513217313.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:33.818Z,1513217313.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:33.867Z,1513217313.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:34.218Z,1513217314.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:34.270Z,1513217314.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:34.405Z,1513217314.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:34.608Z,1513217314.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:34.623Z,1513217314.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:35.011Z,1513217315.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:35.031Z,1513217315.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:35.203Z,1513217315.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:35.421Z,1513217315.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:35.436Z,1513217315.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:35.614Z,1513217315.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:35.811Z,1513217315.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:35.831Z,1513217315.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:36.217Z,1513217316.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:36.233Z,1513217316.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:36.409Z,1513217316.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:36.619Z,1513217316.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:36.639Z,1513217316.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:37.018Z,1513217317.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:37.102Z,1513217317.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:37.205Z,1513217317.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:37.409Z,1513217317.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:37.428Z,1513217317.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:37.609Z,1513217317.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:37.820Z,1513217317.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:37.834Z,1513217317.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:38.212Z,1513217318.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:38.227Z,1513217318.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:38.405Z,1513217318.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:38.611Z,1513217318.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:38.627Z,1513217318.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:39.006Z,1513217319.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:39.023Z,1513217319.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:39.201Z,1513217319.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:39.418Z,1513217319.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:39.433Z,1513217319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:39.605Z,1513217319.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:39.822Z,1513217319.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:39.843Z,1513217319.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:40.221Z,1513217320.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:40.239Z,1513217320.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:40.401Z,1513217320.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:40.609Z,1513217320.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:40.643Z,1513217320.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:40.999Z,1513217320.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:41.023Z,1513217321.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:41.198Z,1513217321.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:41.399Z,1513217321.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:41.430Z,1513217321.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:41.601Z,1513217321.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:41.799Z,1513217321.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:41.828Z,1513217321.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:42.218Z,1513217322.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:42.233Z,1513217322.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:42.397Z,1513217322.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:42.620Z,1513217322.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:42.650Z,1513217322.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:43.021Z,1513217323.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:43.043Z,1513217323.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:43.193Z,1513217323.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:43.399Z,1513217323.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:43.423Z,1513217323.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:43.597Z,1513217323.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:43.837Z,1513217323.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:43.876Z,1513217323.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:44.200Z,1513217324.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:44.235Z,1513217324.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:44.393Z,1513217324.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:44.615Z,1513217324.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:44.629Z,1513217324.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:44.998Z,1513217324.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:45.035Z,1513217325.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:45.189Z,1513217325.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:45.418Z,1513217325.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:45.490Z,1513217325.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:45.593Z,1513217325.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:45.825Z,1513217325.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:45.840Z,1513217325.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:46.208Z,1513217326.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:46.256Z,1513217326.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:46.389Z,1513217326.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:46.600Z,1513217326.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:46.632Z,1513217326.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:47.067Z,1513217327.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:47.131Z,1513217327.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:47.187Z,1513217327.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:47.408Z,1513217327.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:47.424Z,1513217327.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:47.633Z,1513217327.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:47.804Z,1513217327.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:47.858Z,1513217327.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:48.214Z,1513217328.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:48.241Z,1513217328.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:48.429Z,1513217328.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:48.621Z,1513217328.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:48.652Z,1513217328.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:49.018Z,1513217329.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:49.051Z,1513217329.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:49.226Z,1513217329.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:49.408Z,1513217329.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:49.424Z,1513217329.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:49.629Z,1513217329.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:49.808Z,1513217329.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:49.827Z,1513217329.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:50.209Z,1513217330.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:50.224Z,1513217330.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:50.425Z,1513217330.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:50.611Z,1513217330.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:50.626Z,1513217330.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:51.006Z,1513217331.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:51.027Z,1513217331.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:51.222Z,1513217331.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:51.412Z,1513217331.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:51.435Z,1513217331.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:51.625Z,1513217331.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:51.817Z,1513217331.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:51.840Z,1513217331.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:52.216Z,1513217332.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:52.231Z,1513217332.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:52.421Z,1513217332.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:52.612Z,1513217332.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:52.627Z,1513217332.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:53.017Z,1513217333.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:53.032Z,1513217333.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:53.217Z,1513217333.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:53.436Z,1513217333.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:53.476Z,1513217333.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:53.621Z,1513217333.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:53.799Z,1513217333.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:53.825Z,1513217333.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:54.217Z,1513217334.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:54.240Z,1513217334.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:54.417Z,1513217334.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:54.620Z,1513217334.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:54.635Z,1513217334.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:55.030Z,1513217335.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:55.051Z,1513217335.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:55.213Z,1513217335.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:55.399Z,1513217335.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:55.431Z,1513217335.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:55.617Z,1513217335.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:55.798Z,1513217335.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:55.823Z,1513217335.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:56.203Z,1513217336.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:56.273Z,1513217336.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:56.414Z,1513217336.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:56.622Z,1513217336.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:56.654Z,1513217336.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:56.998Z,1513217336.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:57.034Z,1513217337.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:57.209Z,1513217337.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:57.422Z,1513217337.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:57.442Z,1513217337.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:57.629Z,1513217337.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:57.811Z,1513217337.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:57.878Z,1513217337.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:58.209Z,1513217338.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:58.243Z,1513217338.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:58.425Z,1513217338.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:58.599Z,1513217338.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:58.614Z,1513217338.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:58.999Z,1513217338.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:59.019Z,1513217339.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:59.221Z,1513217339.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:59.412Z,1513217339.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:59.439Z,1513217339.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:08:59.625Z,1513217339.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:59.852Z,1513217339.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:08:59.871Z,1513217339.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:00.210Z,1513217340.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:00.225Z,1513217340.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:00.248Z,1513217340.248 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:09:00.421Z,1513217340.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:00.622Z,1513217340.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:00.652Z,1513217340.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:01.010Z,1513217341.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:01.026Z,1513217341.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:01.218Z,1513217341.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:01.416Z,1513217341.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:01.452Z,1513217341.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:01.621Z,1513217341.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:01.804Z,1513217341.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:01.837Z,1513217341.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:02.201Z,1513217342.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:02.223Z,1513217342.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:02.417Z,1513217342.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:02.615Z,1513217342.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:02.631Z,1513217342.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:03.066Z,1513217343.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:03.111Z,1513217343.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:03.214Z,1513217343.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:03.430Z,1513217343.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:03.446Z,1513217343.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:03.625Z,1513217343.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:03.815Z,1513217343.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:03.850Z,1513217343.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:04.209Z,1513217344.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:04.239Z,1513217344.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:04.421Z,1513217344.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:04.605Z,1513217344.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:04.631Z,1513217344.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:05.004Z,1513217345.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:05.035Z,1513217345.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:05.217Z,1513217345.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:05.411Z,1513217345.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:05.426Z,1513217345.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:05.621Z,1513217345.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:05.808Z,1513217345.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:05.822Z,1513217345.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:06.215Z,1513217346.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:06.231Z,1513217346.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:06.418Z,1513217346.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:06.613Z,1513217346.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:06.631Z,1513217346.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:07.029Z,1513217347.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:07.056Z,1513217347.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:07.213Z,1513217347.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:07.407Z,1513217347.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:07.422Z,1513217347.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:07.617Z,1513217347.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:07.811Z,1513217347.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:07.826Z,1513217347.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:08.413Z,1513217348.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:09.209Z,1513217349.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:09.613Z,1513217349.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:10.409Z,1513217350.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.205Z,1513217351.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.353Z,1513217351.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.441Z,1513217351.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:11.551Z,1513217351.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.583Z,1513217351.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:11.609Z,1513217351.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.918Z,1513217351.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:11.971Z,1513217351.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:12.322Z,1513217352.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:12.337Z,1513217352.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:12.405Z,1513217352.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:12.718Z,1513217352.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:12.768Z,1513217352.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:13.107Z,1513217353.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:13.123Z,1513217353.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:13.201Z,1513217353.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:13.518Z,1513217353.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:13.534Z,1513217353.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:13.605Z,1513217353.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:13.904Z,1513217353.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:13.920Z,1513217353.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:14.315Z,1513217354.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:14.333Z,1513217354.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:14.401Z,1513217354.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:14.720Z,1513217354.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:14.736Z,1513217354.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:15.118Z,1513217355.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:15.133Z,1513217355.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:15.199Z,1513217355.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:15.511Z,1513217355.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:15.539Z,1513217355.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:15.629Z,1513217355.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:15.898Z,1513217355.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:15.938Z,1513217355.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:16.299Z,1513217356.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:16.336Z,1513217356.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:16.426Z,1513217356.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:16.698Z,1513217356.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:16.733Z,1513217356.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:17.123Z,1513217357.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:17.138Z,1513217357.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:17.222Z,1513217357.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:17.517Z,1513217357.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:17.544Z,1513217357.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:17.637Z,1513217357.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:17.921Z,1513217357.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:17.951Z,1513217357.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:18.310Z,1513217358.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:18.349Z,1513217358.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:18.433Z,1513217358.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:18.700Z,1513217358.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:18.723Z,1513217358.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:19.141Z,1513217359.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:19.169Z,1513217359.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:19.230Z,1513217359.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:19.509Z,1513217359.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:19.523Z,1513217359.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:19.636Z,1513217359.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:19.927Z,1513217359.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:19.947Z,1513217359.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:20.309Z,1513217360.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:20.331Z,1513217360.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:20.429Z,1513217360.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:20.709Z,1513217360.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:20.773Z,1513217360.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:21.110Z,1513217361.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:21.179Z,1513217361.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:21.226Z,1513217361.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:21.499Z,1513217361.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:21.535Z,1513217361.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:21.629Z,1513217361.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:21.900Z,1513217361.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:21.914Z,1513217361.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:22.337Z,1513217362.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:22.368Z,1513217362.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:22.426Z,1513217362.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:22.707Z,1513217362.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:22.721Z,1513217362.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:23.125Z,1513217363.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:23.150Z,1513217363.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:23.221Z,1513217363.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:23.521Z,1513217363.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:23.547Z,1513217363.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:23.625Z,1513217363.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:23.917Z,1513217363.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:23.946Z,1513217363.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:24.308Z,1513217364.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:24.322Z,1513217364.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:24.421Z,1513217364.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:24.704Z,1513217364.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:24.719Z,1513217364.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:25.108Z,1513217365.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:25.122Z,1513217365.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:25.231Z,1513217365.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:25.527Z,1513217365.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:25.569Z,1513217365.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:25.638Z,1513217365.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:25.905Z,1513217365.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:25.920Z,1513217365.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:26.322Z,1513217366.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:26.345Z,1513217366.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:26.433Z,1513217366.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:26.721Z,1513217366.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:26.773Z,1513217366.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:27.110Z,1513217367.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:27.124Z,1513217367.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:27.229Z,1513217367.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:27.508Z,1513217367.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:27.527Z,1513217367.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:27.633Z,1513217367.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:27.908Z,1513217367.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:27.923Z,1513217367.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:28.310Z,1513217368.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:28.324Z,1513217368.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:28.429Z,1513217368.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:28.728Z,1513217368.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:28.770Z,1513217368.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:29.122Z,1513217369.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:29.226Z,1513217369.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:29.228Z,1513217369.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:29.513Z,1513217369.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:29.528Z,1513217369.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:29.629Z,1513217369.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:29.922Z,1513217369.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:29.952Z,1513217369.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:30.306Z,1513217370.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:30.336Z,1513217370.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:30.425Z,1513217370.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:30.709Z,1513217370.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:30.724Z,1513217370.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:31.132Z,1513217371.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:31.151Z,1513217371.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:31.222Z,1513217371.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:31.508Z,1513217371.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:31.523Z,1513217371.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:31.625Z,1513217371.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:31.935Z,1513217371.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:31.963Z,1513217371.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:32.324Z,1513217372.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:32.338Z,1513217372.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:32.421Z,1513217372.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:32.727Z,1513217372.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:32.779Z,1513217372.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:33.110Z,1513217373.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:33.163Z,1513217373.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:33.217Z,1513217373.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:33.507Z,1513217373.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:33.524Z,1513217373.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:33.621Z,1513217373.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:33.907Z,1513217373.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:33.928Z,1513217373.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:34.310Z,1513217374.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:34.362Z,1513217374.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:34.417Z,1513217374.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:34.708Z,1513217374.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:34.722Z,1513217374.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:35.129Z,1513217375.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:35.193Z,1513217375.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:35.213Z,1513217375.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:35.519Z,1513217375.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:35.617Z,1513217375.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:35.624Z,1513217375.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:35.917Z,1513217375.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:35.932Z,1513217375.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:36.305Z,1513217376.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:36.320Z,1513217376.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:36.414Z,1513217376.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:36.706Z,1513217376.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:36.721Z,1513217376.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:37.115Z,1513217377.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:37.129Z,1513217377.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:37.209Z,1513217377.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:37.507Z,1513217377.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:37.527Z,1513217377.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:37.613Z,1513217377.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:37.904Z,1513217377.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:37.918Z,1513217377.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:38.312Z,1513217378.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:38.327Z,1513217378.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:38.409Z,1513217378.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:38.743Z,1513217378.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:38.764Z,1513217378.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:39.115Z,1513217379.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:39.138Z,1513217379.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:39.205Z,1513217379.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:39.499Z,1513217379.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:39.526Z,1513217379.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:39.609Z,1513217379.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:39.899Z,1513217379.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:39.933Z,1513217379.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:40.311Z,1513217380.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:40.326Z,1513217380.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:40.405Z,1513217380.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:40.698Z,1513217380.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:40.727Z,1513217380.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:41.119Z,1513217381.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:41.134Z,1513217381.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:41.202Z,1513217381.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:41.525Z,1513217381.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:41.540Z,1513217381.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:41.606Z,1513217381.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:41.910Z,1513217381.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:41.947Z,1513217381.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:42.301Z,1513217382.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:42.337Z,1513217382.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:42.401Z,1513217382.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:42.699Z,1513217382.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:42.735Z,1513217382.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:43.109Z,1513217383.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:43.141Z,1513217383.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:43.199Z,1513217383.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:43.517Z,1513217383.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:43.572Z,1513217383.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:43.621Z,1513217383.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:43.918Z,1513217383.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:43.943Z,1513217383.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:44.306Z,1513217384.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:44.321Z,1513217384.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:44.417Z,1513217384.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:44.724Z,1513217384.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:44.758Z,1513217384.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:45.114Z,1513217385.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:45.146Z,1513217385.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:45.219Z,1513217385.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:45.502Z,1513217385.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:45.539Z,1513217385.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:45.621Z,1513217385.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:45.914Z,1513217385.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:45.966Z,1513217385.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:46.327Z,1513217386.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:46.342Z,1513217386.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:46.417Z,1513217386.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:46.725Z,1513217386.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:46.740Z,1513217386.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:47.121Z,1513217387.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:47.136Z,1513217387.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:47.213Z,1513217387.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:47.499Z,1513217387.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:47.536Z,1513217387.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:47.617Z,1513217387.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:47.934Z,1513217387.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:47.994Z,1513217387.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:48.301Z,1513217388.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:48.332Z,1513217388.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:48.413Z,1513217388.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:48.704Z,1513217388.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:48.732Z,1513217388.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:49.120Z,1513217389.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:49.136Z,1513217389.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:49.212Z,1513217389.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:49.521Z,1513217389.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:49.552Z,1513217389.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:49.617Z,1513217389.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:49.923Z,1513217389.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:49.940Z,1513217389.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:50.299Z,1513217390.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:50.330Z,1513217390.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:50.413Z,1513217390.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:50.702Z,1513217390.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:50.731Z,1513217390.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:51.180Z,1513217391.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:51.207Z,1513217391.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:51.221Z,1513217391.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:51.524Z,1513217391.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:51.548Z,1513217391.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:51.625Z,1513217391.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:51.922Z,1513217391.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:51.954Z,1513217391.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:52.305Z,1513217392.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:52.336Z,1513217392.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:52.423Z,1513217392.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:52.712Z,1513217392.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:52.742Z,1513217392.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:53.107Z,1513217393.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:53.138Z,1513217393.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:53.217Z,1513217393.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:53.504Z,1513217393.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:53.520Z,1513217393.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:53.621Z,1513217393.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:53.905Z,1513217393.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:53.920Z,1513217393.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:54.339Z,1513217394.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:54.399Z,1513217394.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:54.417Z,1513217394.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:54.721Z,1513217394.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:54.755Z,1513217394.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:55.120Z,1513217395.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:55.195Z,1513217395.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:55.213Z,1513217395.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:55.507Z,1513217395.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:55.521Z,1513217395.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:55.617Z,1513217395.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:55.903Z,1513217395.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:55.918Z,1513217395.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:56.303Z,1513217396.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:56.330Z,1513217396.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:56.413Z,1513217396.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:56.705Z,1513217396.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:56.719Z,1513217396.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:57.121Z,1513217397.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:57.153Z,1513217397.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:57.211Z,1513217397.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:57.521Z,1513217397.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:57.567Z,1513217397.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:57.630Z,1513217397.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:57.913Z,1513217397.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:57.927Z,1513217397.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:58.311Z,1513217398.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:58.326Z,1513217398.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:58.425Z,1513217398.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:58.704Z,1513217398.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:58.712Z,1513217398.712 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:09:58.712Z,1513217398.712 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:09:58.712Z,1513217398.712 [BPC1](ERROR): Communications Fault
2017-12-14T02:09:58.742Z,1513217398.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:58.774Z,1513217398.774 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:09:59.118Z,1513217399.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:59.132Z,1513217399.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:59.222Z,1513217399.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:59.538Z,1513217399.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:59.554Z,1513217399.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:59.625Z,1513217399.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:59.926Z,1513217399.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:09:59.941Z,1513217399.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:09:59.955Z,1513217399.955 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:09:59.955Z,1513217399.955 [BPC1] No Fault, FailCount= 1
2017-12-14T02:10:00.299Z,1513217400.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:00.379Z,1513217400.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:00.421Z,1513217400.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:00.710Z,1513217400.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:00.751Z,1513217400.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:01.098Z,1513217401.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:01.131Z,1513217401.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:01.217Z,1513217401.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:01.499Z,1513217401.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:01.525Z,1513217401.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:01.621Z,1513217401.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:01.911Z,1513217401.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:01.931Z,1513217401.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:02.324Z,1513217402.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:02.339Z,1513217402.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:02.417Z,1513217402.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:02.726Z,1513217402.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:02.740Z,1513217402.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:03.118Z,1513217403.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:03.133Z,1513217403.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:03.213Z,1513217403.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:03.499Z,1513217403.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:03.531Z,1513217403.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:03.617Z,1513217403.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:03.898Z,1513217403.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:03.923Z,1513217403.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:04.299Z,1513217404.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:04.325Z,1513217404.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:04.413Z,1513217404.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:04.715Z,1513217404.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:04.729Z,1513217404.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:05.120Z,1513217405.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:05.142Z,1513217405.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:05.209Z,1513217405.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:05.522Z,1513217405.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:05.537Z,1513217405.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:05.613Z,1513217405.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:05.914Z,1513217405.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:05.943Z,1513217405.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:06.299Z,1513217406.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:06.324Z,1513217406.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:06.409Z,1513217406.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:06.703Z,1513217406.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:06.728Z,1513217406.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:07.141Z,1513217407.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:07.186Z,1513217407.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:07.213Z,1513217407.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:07.523Z,1513217407.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:07.543Z,1513217407.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:07.617Z,1513217407.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:07.958Z,1513217407.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:08.021Z,1513217408.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:08.413Z,1513217408.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:09.209Z,1513217409.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:09.613Z,1513217409.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:10.410Z,1513217410.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.211Z,1513217411.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.421Z,1513217411.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.478Z,1513217411.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:11.581Z,1513217411.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.617Z,1513217411.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.619Z,1513217411.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:11.946Z,1513217411.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:11.978Z,1513217411.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:12.353Z,1513217412.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:12.377Z,1513217412.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:12.413Z,1513217412.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:12.746Z,1513217412.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:12.781Z,1513217412.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:13.133Z,1513217413.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:13.203Z,1513217413.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:13.211Z,1513217413.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:13.529Z,1513217413.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:13.594Z,1513217413.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:13.629Z,1513217413.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:13.947Z,1513217413.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:13.964Z,1513217413.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:14.349Z,1513217414.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:14.364Z,1513217414.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:14.425Z,1513217414.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:14.754Z,1513217414.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:14.768Z,1513217414.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:15.151Z,1513217415.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:15.171Z,1513217415.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:15.221Z,1513217415.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:15.527Z,1513217415.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:15.564Z,1513217415.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:15.625Z,1513217415.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:15.927Z,1513217415.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:15.965Z,1513217415.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:16.332Z,1513217416.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:16.365Z,1513217416.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:16.421Z,1513217416.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:16.757Z,1513217416.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:16.772Z,1513217416.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:17.147Z,1513217417.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:17.162Z,1513217417.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:17.217Z,1513217417.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:17.558Z,1513217417.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:17.572Z,1513217417.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:17.621Z,1513217417.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:17.942Z,1513217417.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:17.971Z,1513217417.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:18.326Z,1513217418.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:18.357Z,1513217418.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:18.417Z,1513217418.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:18.731Z,1513217418.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:18.764Z,1513217418.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:19.136Z,1513217419.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:19.152Z,1513217419.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:19.213Z,1513217419.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:19.540Z,1513217419.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:19.555Z,1513217419.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:19.617Z,1513217419.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:19.935Z,1513217419.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:19.951Z,1513217419.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:20.338Z,1513217420.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:20.353Z,1513217420.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:20.414Z,1513217420.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:20.742Z,1513217420.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:20.757Z,1513217420.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:21.138Z,1513217421.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:21.171Z,1513217421.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:21.209Z,1513217421.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:21.527Z,1513217421.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:21.563Z,1513217421.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:21.613Z,1513217421.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:21.927Z,1513217421.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:21.986Z,1513217421.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:22.332Z,1513217422.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:22.364Z,1513217422.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:22.410Z,1513217422.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:22.727Z,1513217422.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:22.764Z,1513217422.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:23.183Z,1513217423.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:23.206Z,1513217423.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:23.219Z,1513217423.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:23.541Z,1513217423.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:23.601Z,1513217423.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:23.609Z,1513217423.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:23.954Z,1513217423.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:23.973Z,1513217423.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:24.330Z,1513217424.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:24.379Z,1513217424.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:24.405Z,1513217424.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:24.791Z,1513217424.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:24.814Z,1513217424.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:25.140Z,1513217425.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:25.203Z,1513217425.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:25.241Z,1513217425.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:25.538Z,1513217425.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:25.554Z,1513217425.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:25.617Z,1513217425.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:25.933Z,1513217425.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:25.951Z,1513217425.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:26.371Z,1513217426.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:26.398Z,1513217426.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:26.414Z,1513217426.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:26.752Z,1513217426.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:26.771Z,1513217426.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:27.167Z,1513217427.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:27.212Z,1513217427.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:27.243Z,1513217427.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:27.532Z,1513217427.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:27.560Z,1513217427.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:27.617Z,1513217427.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:27.927Z,1513217427.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:27.963Z,1513217427.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:28.332Z,1513217428.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:28.360Z,1513217428.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:28.413Z,1513217428.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:28.730Z,1513217428.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:28.763Z,1513217428.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:29.151Z,1513217429.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:29.171Z,1513217429.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:29.209Z,1513217429.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:29.557Z,1513217429.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:29.599Z,1513217429.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:29.613Z,1513217429.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:29.946Z,1513217429.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:29.967Z,1513217429.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:30.328Z,1513217430.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:30.363Z,1513217430.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:30.409Z,1513217430.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:30.726Z,1513217430.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:30.749Z,1513217430.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:31.127Z,1513217431.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:31.164Z,1513217431.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:31.205Z,1513217431.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:31.527Z,1513217431.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:31.570Z,1513217431.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:31.609Z,1513217431.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:31.925Z,1513217431.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:31.957Z,1513217431.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:32.358Z,1513217432.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:32.372Z,1513217432.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:32.405Z,1513217432.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:32.773Z,1513217432.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:32.889Z,1513217432.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:33.144Z,1513217433.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:33.164Z,1513217433.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:33.202Z,1513217433.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:33.530Z,1513217433.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:33.562Z,1513217433.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:33.605Z,1513217433.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:33.937Z,1513217433.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:33.951Z,1513217433.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:34.342Z,1513217434.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:34.358Z,1513217434.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:34.401Z,1513217434.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:34.738Z,1513217434.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:34.754Z,1513217434.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:35.147Z,1513217435.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:35.163Z,1513217435.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:35.197Z,1513217435.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:35.547Z,1513217435.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:35.566Z,1513217435.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:35.601Z,1513217435.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:35.947Z,1513217435.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:35.962Z,1513217435.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:36.331Z,1513217436.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:36.365Z,1513217436.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:36.397Z,1513217436.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:36.732Z,1513217436.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:36.764Z,1513217436.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:37.138Z,1513217437.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:37.171Z,1513217437.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:37.193Z,1513217437.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:37.527Z,1513217437.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:37.558Z,1513217437.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:37.597Z,1513217437.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:37.924Z,1513217437.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:37.939Z,1513217437.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:38.341Z,1513217438.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:38.368Z,1513217438.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:38.393Z,1513217438.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:38.741Z,1513217438.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:38.776Z,1513217438.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:39.191Z,1513217439.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:39.202Z,1513217439.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:39.285Z,1513217439.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:39.534Z,1513217439.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:39.549Z,1513217439.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:39.621Z,1513217439.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:39.938Z,1513217439.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:39.968Z,1513217439.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:40.340Z,1513217440.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:40.355Z,1513217440.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:40.419Z,1513217440.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:40.743Z,1513217440.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:40.763Z,1513217440.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:41.144Z,1513217441.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:41.213Z,1513217441.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:41.232Z,1513217441.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:41.553Z,1513217441.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:41.568Z,1513217441.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:41.617Z,1513217441.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:41.938Z,1513217441.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:41.972Z,1513217441.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:42.367Z,1513217442.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:42.392Z,1513217442.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:42.413Z,1513217442.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:42.732Z,1513217442.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:42.762Z,1513217442.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:43.138Z,1513217443.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:43.165Z,1513217443.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:43.209Z,1513217443.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:43.536Z,1513217443.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:43.551Z,1513217443.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:43.613Z,1513217443.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:43.937Z,1513217443.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:43.979Z,1513217443.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:44.342Z,1513217444.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:44.375Z,1513217444.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:44.409Z,1513217444.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:44.754Z,1513217444.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:44.847Z,1513217444.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:45.138Z,1513217445.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:45.153Z,1513217445.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:45.205Z,1513217445.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:45.543Z,1513217445.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:45.603Z,1513217445.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:45.610Z,1513217445.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:45.926Z,1513217445.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:45.993Z,1513217445.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:46.339Z,1513217446.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:46.356Z,1513217446.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:46.405Z,1513217446.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:46.726Z,1513217446.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:46.786Z,1513217446.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:47.136Z,1513217447.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:47.163Z,1513217447.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:47.201Z,1513217447.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:47.549Z,1513217447.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:47.567Z,1513217447.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:47.605Z,1513217447.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:47.946Z,1513217447.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:47.966Z,1513217447.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:48.327Z,1513217448.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:48.361Z,1513217448.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:48.401Z,1513217448.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:48.724Z,1513217448.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:48.780Z,1513217448.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:49.137Z,1513217449.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:49.152Z,1513217449.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:49.197Z,1513217449.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:49.536Z,1513217449.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:49.551Z,1513217449.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:49.601Z,1513217449.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:49.935Z,1513217449.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:49.951Z,1513217449.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:50.350Z,1513217450.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:50.385Z,1513217450.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:50.397Z,1513217450.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:50.747Z,1513217450.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:50.761Z,1513217450.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:51.140Z,1513217451.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:51.160Z,1513217451.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:51.194Z,1513217451.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:51.538Z,1513217451.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:51.553Z,1513217451.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:51.597Z,1513217451.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:51.936Z,1513217451.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:51.951Z,1513217451.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:52.328Z,1513217452.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:52.355Z,1513217452.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:52.393Z,1513217452.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:52.726Z,1513217452.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:52.748Z,1513217452.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:53.191Z,1513217453.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:53.202Z,1513217453.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:53.251Z,1513217453.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:53.550Z,1513217453.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:53.579Z,1513217453.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:53.597Z,1513217453.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:53.950Z,1513217453.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:53.979Z,1513217453.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:54.331Z,1513217454.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:54.347Z,1513217454.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:54.393Z,1513217454.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:54.735Z,1513217454.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:54.751Z,1513217454.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:55.133Z,1513217455.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:55.194Z,1513217455.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:55.229Z,1513217455.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:55.538Z,1513217455.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:55.553Z,1513217455.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:55.625Z,1513217455.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:55.938Z,1513217455.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:55.955Z,1513217455.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:56.340Z,1513217456.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:56.363Z,1513217456.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:56.421Z,1513217456.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:56.763Z,1513217456.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:56.784Z,1513217456.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:57.142Z,1513217457.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:57.171Z,1513217457.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:57.217Z,1513217457.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:57.526Z,1513217457.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:57.563Z,1513217457.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:57.621Z,1513217457.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:57.927Z,1513217457.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:57.964Z,1513217457.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:58.333Z,1513217458.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:58.360Z,1513217458.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:58.417Z,1513217458.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:58.727Z,1513217458.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:58.759Z,1513217458.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:59.137Z,1513217459.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:59.164Z,1513217459.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:59.213Z,1513217459.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:59.553Z,1513217459.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:59.568Z,1513217459.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:10:59.617Z,1513217459.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:59.937Z,1513217459.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:10:59.964Z,1513217459.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:00.334Z,1513217460.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:00.361Z,1513217460.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:00.414Z,1513217460.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:00.724Z,1513217460.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:00.740Z,1513217460.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:01.127Z,1513217461.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:01.170Z,1513217461.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:01.229Z,1513217461.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:01.527Z,1513217461.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:01.571Z,1513217461.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:01.633Z,1513217461.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:01.924Z,1513217461.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:01.939Z,1513217461.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:02.338Z,1513217462.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:02.369Z,1513217462.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:02.429Z,1513217462.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:02.741Z,1513217462.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:02.774Z,1513217462.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:03.154Z,1513217463.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:03.177Z,1513217463.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:03.225Z,1513217463.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:03.534Z,1513217463.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:03.551Z,1513217463.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:03.629Z,1513217463.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:03.935Z,1513217463.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:03.951Z,1513217463.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:04.334Z,1513217464.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:04.357Z,1513217464.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:04.425Z,1513217464.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:04.744Z,1513217464.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:04.760Z,1513217464.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:05.179Z,1513217465.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:05.210Z,1513217465.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:05.229Z,1513217465.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:05.552Z,1513217465.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:05.567Z,1513217465.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:05.633Z,1513217465.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:05.947Z,1513217465.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:06.006Z,1513217466.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:06.331Z,1513217466.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:06.359Z,1513217466.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:06.429Z,1513217466.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:06.727Z,1513217466.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:06.759Z,1513217466.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:07.131Z,1513217467.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:07.226Z,1513217467.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:07.249Z,1513217467.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:07.529Z,1513217467.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:07.570Z,1513217467.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:07.629Z,1513217467.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:07.933Z,1513217467.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:07.950Z,1513217467.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:08.425Z,1513217468.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:09.222Z,1513217469.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:09.625Z,1513217469.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:10.422Z,1513217470.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:11.217Z,1513217471.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:11.538Z,1513217471.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:11.599Z,1513217471.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:11.621Z,1513217471.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:11.719Z,1513217471.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:11.755Z,1513217471.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:12.106Z,1513217472.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:12.163Z,1513217472.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:12.417Z,1513217472.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:12.504Z,1513217472.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:12.552Z,1513217472.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:12.897Z,1513217472.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:12.935Z,1513217472.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:13.213Z,1513217473.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:13.296Z,1513217473.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:13.334Z,1513217473.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:13.617Z,1513217473.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:13.738Z,1513217473.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:13.769Z,1513217473.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:14.105Z,1513217474.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:14.139Z,1513217474.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:14.413Z,1513217474.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:14.522Z,1513217474.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:14.544Z,1513217474.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:14.934Z,1513217474.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:14.967Z,1513217474.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:15.209Z,1513217475.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:15.295Z,1513217475.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:15.342Z,1513217475.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:15.613Z,1513217475.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:15.696Z,1513217475.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:15.721Z,1513217475.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:16.095Z,1513217476.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:16.127Z,1513217476.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:16.409Z,1513217476.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:16.500Z,1513217476.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:16.533Z,1513217476.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:16.913Z,1513217476.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:16.948Z,1513217476.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:17.205Z,1513217477.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:17.311Z,1513217477.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:17.361Z,1513217477.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:17.609Z,1513217477.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:17.713Z,1513217477.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:17.729Z,1513217477.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:18.129Z,1513217478.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:18.174Z,1513217478.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:18.406Z,1513217478.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:18.496Z,1513217478.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:18.579Z,1513217478.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:18.978Z,1513217478.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:18.994Z,1513217478.994 [PNI_TCM](ERROR): CRC does not match. Expected:0x46325 got:0x245
2017-12-14T02:11:19.047Z,1513217479.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:19.202Z,1513217479.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:19.310Z,1513217479.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:19.348Z,1513217479.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:19.606Z,1513217479.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:19.709Z,1513217479.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:19.761Z,1513217479.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:20.119Z,1513217480.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:20.155Z,1513217480.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:20.402Z,1513217480.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:20.521Z,1513217480.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:20.595Z,1513217480.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:20.910Z,1513217480.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:20.950Z,1513217480.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:21.199Z,1513217481.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:21.306Z,1513217481.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:21.367Z,1513217481.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:21.610Z,1513217481.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:21.726Z,1513217481.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:21.767Z,1513217481.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:22.112Z,1513217482.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:22.162Z,1513217482.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:22.405Z,1513217482.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:22.517Z,1513217482.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:22.547Z,1513217482.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:22.925Z,1513217482.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:22.971Z,1513217482.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:23.203Z,1513217483.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:23.303Z,1513217483.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:23.373Z,1513217483.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:23.625Z,1513217483.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:23.696Z,1513217483.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:23.723Z,1513217483.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:24.099Z,1513217484.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:24.126Z,1513217484.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:24.421Z,1513217484.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:24.498Z,1513217484.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:24.512Z,1513217484.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:24.898Z,1513217484.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:24.950Z,1513217484.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:25.218Z,1513217485.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:25.316Z,1513217485.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:25.359Z,1513217485.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:25.622Z,1513217485.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:25.722Z,1513217485.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:25.776Z,1513217485.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:26.119Z,1513217486.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:26.175Z,1513217486.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:26.418Z,1513217486.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:26.498Z,1513217486.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:26.550Z,1513217486.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:26.931Z,1513217486.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:26.980Z,1513217486.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:27.213Z,1513217487.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:27.306Z,1513217487.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:27.329Z,1513217487.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:27.617Z,1513217487.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:27.722Z,1513217487.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:27.745Z,1513217487.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:28.151Z,1513217488.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:28.195Z,1513217488.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:28.414Z,1513217488.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:28.511Z,1513217488.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:28.576Z,1513217488.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:28.577Z,1513217488.577 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2017-12-14T02:11:28.577Z,1513217488.577 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:11:28.616Z,1513217488.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:11:28.915Z,1513217488.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:28.956Z,1513217488.956 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:28.956Z,1513217488.956 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2017-12-14T02:11:28.956Z,1513217488.956 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:11:28.978Z,1513217488.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:28.978Z,1513217488.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2017-12-14T02:11:28.978Z,1513217488.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:11:29.010Z,1513217489.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:11:29.010Z,1513217489.010 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2017-12-14T02:11:29.011Z,1513217489.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:11:29.011Z,1513217489.011 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:11:29.209Z,1513217489.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:29.321Z,1513217489.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:29.344Z,1513217489.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:11:29.361Z,1513217489.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:11:29.361Z,1513217489.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:11:29.390Z,1513217489.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:11:29.390Z,1513217489.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2017-12-14T02:11:29.390Z,1513217489.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:11:29.390Z,1513217489.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2017-12-14T02:11:29.613Z,1513217489.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:29.743Z,1513217489.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:29.760Z,1513217489.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:29.761Z,1513217489.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:11:29.761Z,1513217489.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:11:29.762Z,1513217489.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:11:29.762Z,1513217489.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:11:29.762Z,1513217489.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:11:29.763Z,1513217489.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:11:30.125Z,1513217490.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:30.177Z,1513217490.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:30.409Z,1513217490.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:30.509Z,1513217490.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:30.555Z,1513217490.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:30.946Z,1513217490.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:31.015Z,1513217491.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:31.206Z,1513217491.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:31.323Z,1513217491.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:31.376Z,1513217491.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:31.610Z,1513217491.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:31.706Z,1513217491.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:31.725Z,1513217491.725 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:11:31.726Z,1513217491.726 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:11:31.726Z,1513217491.726 [BPC1](ERROR): Data Fault
2017-12-14T02:11:31.763Z,1513217491.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:31.804Z,1513217491.804 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:11:32.098Z,1513217492.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:32.171Z,1513217492.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:32.406Z,1513217492.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:32.504Z,1513217492.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:32.561Z,1513217492.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:32.965Z,1513217492.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:32.000Z,1513217493.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:33.047Z,1513217493.047 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:11:33.047Z,1513217493.047 [BPC1] No Fault, FailCount= 1
2017-12-14T02:11:33.202Z,1513217493.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:33.308Z,1513217493.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:33.432Z,1513217493.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:33.606Z,1513217493.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:33.715Z,1513217493.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:33.783Z,1513217493.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:34.111Z,1513217494.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:34.204Z,1513217494.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:34.401Z,1513217494.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:34.498Z,1513217494.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:34.551Z,1513217494.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:34.907Z,1513217494.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:34.969Z,1513217494.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:35.199Z,1513217495.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:35.298Z,1513217495.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:35.359Z,1513217495.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:35.697Z,1513217495.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:35.716Z,1513217495.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:35.993Z,1513217495.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:36.109Z,1513217496.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:36.178Z,1513217496.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:36.400Z,1513217496.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:36.531Z,1513217496.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:36.567Z,1513217496.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:36.917Z,1513217496.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:36.980Z,1513217496.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:37.199Z,1513217497.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:37.298Z,1513217497.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:37.336Z,1513217497.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:37.630Z,1513217497.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:37.697Z,1513217497.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:37.739Z,1513217497.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:38.113Z,1513217498.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:38.164Z,1513217498.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:38.425Z,1513217498.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:38.521Z,1513217498.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:38.546Z,1513217498.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:38.932Z,1513217498.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:38.946Z,1513217498.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:39.221Z,1513217499.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:39.314Z,1513217499.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:39.335Z,1513217499.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:39.625Z,1513217499.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:39.695Z,1513217499.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:39.728Z,1513217499.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:40.095Z,1513217500.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:40.123Z,1513217500.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:40.422Z,1513217500.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:40.496Z,1513217500.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:40.520Z,1513217500.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:40.900Z,1513217500.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:40.948Z,1513217500.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:41.218Z,1513217501.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:41.314Z,1513217501.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:41.366Z,1513217501.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:41.621Z,1513217501.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:41.722Z,1513217501.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:41.775Z,1513217501.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:42.115Z,1513217502.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:42.136Z,1513217502.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:42.418Z,1513217502.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:42.495Z,1513217502.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:42.540Z,1513217502.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:42.899Z,1513217502.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:42.936Z,1513217502.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:43.213Z,1513217503.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:43.295Z,1513217503.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:43.318Z,1513217503.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:43.617Z,1513217503.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:43.703Z,1513217503.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:43.742Z,1513217503.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:44.105Z,1513217504.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:44.146Z,1513217504.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:44.414Z,1513217504.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:44.509Z,1513217504.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:44.546Z,1513217504.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:44.929Z,1513217504.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:44.952Z,1513217504.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:45.209Z,1513217505.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:45.299Z,1513217505.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:45.354Z,1513217505.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:45.613Z,1513217505.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:45.698Z,1513217505.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:45.743Z,1513217505.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:46.103Z,1513217506.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:46.138Z,1513217506.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:46.409Z,1513217506.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:46.494Z,1513217506.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:46.509Z,1513217506.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:46.957Z,1513217506.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:46.984Z,1513217506.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:47.205Z,1513217507.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:47.317Z,1513217507.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:47.335Z,1513217507.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:47.609Z,1513217507.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:47.717Z,1513217507.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:47.767Z,1513217507.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:48.113Z,1513217508.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:48.131Z,1513217508.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:48.407Z,1513217508.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:48.495Z,1513217508.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:48.535Z,1513217508.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:48.900Z,1513217508.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:48.943Z,1513217508.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:49.203Z,1513217509.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:49.295Z,1513217509.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:49.327Z,1513217509.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:49.617Z,1513217509.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:49.695Z,1513217509.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:49.730Z,1513217509.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:50.117Z,1513217510.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:50.141Z,1513217510.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:50.413Z,1513217510.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:50.533Z,1513217510.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:50.578Z,1513217510.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:50.918Z,1513217510.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:50.956Z,1513217510.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:51.211Z,1513217511.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:51.310Z,1513217511.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:51.340Z,1513217511.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:51.613Z,1513217511.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:51.705Z,1513217511.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:51.720Z,1513217511.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:52.102Z,1513217512.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:52.126Z,1513217512.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:52.409Z,1513217512.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:52.502Z,1513217512.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:52.562Z,1513217512.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:52.907Z,1513217512.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:52.930Z,1513217512.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:53.205Z,1513217513.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:53.312Z,1513217513.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:53.335Z,1513217513.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:53.609Z,1513217513.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:53.731Z,1513217513.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:53.764Z,1513217513.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:54.114Z,1513217514.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:54.163Z,1513217514.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:54.405Z,1513217514.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:54.492Z,1513217514.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:54.520Z,1513217514.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:54.932Z,1513217514.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:54.968Z,1513217514.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:55.201Z,1513217515.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:55.295Z,1513217515.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:55.338Z,1513217515.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:55.605Z,1513217515.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:55.699Z,1513217515.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:55.731Z,1513217515.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:56.106Z,1513217516.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:56.148Z,1513217516.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:56.401Z,1513217516.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:56.518Z,1513217516.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:56.541Z,1513217516.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:56.911Z,1513217516.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:56.938Z,1513217516.938 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:11:56.939Z,1513217516.939 [BPC1] Communications Fault, FailCount= 2
2017-12-14T02:11:56.939Z,1513217516.939 [BPC1](ERROR): Communications Fault
2017-12-14T02:11:56.971Z,1513217516.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:57.025Z,1513217517.025 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:11:57.197Z,1513217517.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:57.307Z,1513217517.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:57.362Z,1513217517.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:57.601Z,1513217517.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:57.698Z,1513217517.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:57.724Z,1513217517.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:58.110Z,1513217518.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:58.146Z,1513217518.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:58.159Z,1513217518.159 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:11:58.160Z,1513217518.160 [BPC1] No Fault, FailCount= 2
2017-12-14T02:11:58.397Z,1513217518.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:58.510Z,1513217518.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:58.608Z,1513217518.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:58.932Z,1513217518.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:58.957Z,1513217518.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:59.193Z,1513217519.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:59.295Z,1513217519.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:59.310Z,1513217519.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:11:59.597Z,1513217519.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:59.699Z,1513217519.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:11:59.735Z,1513217519.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:00.102Z,1513217520.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:00.166Z,1513217520.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:00.393Z,1513217520.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:00.496Z,1513217520.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:00.528Z,1513217520.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:00.934Z,1513217520.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:00.967Z,1513217520.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:01.189Z,1513217521.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:01.326Z,1513217521.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:01.346Z,1513217521.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:01.709Z,1513217521.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:01.744Z,1513217521.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:01.985Z,1513217521.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:02.118Z,1513217522.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:02.178Z,1513217522.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:02.499Z,1513217522.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:02.542Z,1513217522.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:02.781Z,1513217522.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:02.900Z,1513217522.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:02.946Z,1513217522.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:03.342Z,1513217523.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:03.393Z,1513217523.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:03.577Z,1513217523.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:03.699Z,1513217523.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:03.728Z,1513217523.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:04.110Z,1513217524.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:04.142Z,1513217524.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:04.373Z,1513217524.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:04.524Z,1513217524.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:04.545Z,1513217524.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:04.910Z,1513217524.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:04.964Z,1513217524.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:05.171Z,1513217525.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:05.300Z,1513217525.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:05.332Z,1513217525.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:05.695Z,1513217525.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:05.711Z,1513217525.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:05.965Z,1513217525.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:06.107Z,1513217526.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:06.151Z,1513217526.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:06.551Z,1513217526.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:06.604Z,1513217526.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:06.761Z,1513217526.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:06.909Z,1513217526.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:06.971Z,1513217526.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:07.307Z,1513217527.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:07.322Z,1513217527.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:07.325Z,1513217527.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:07:07.1Z
2017-12-14T02:12:07.326Z,1513217527.326 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:12:07.326Z,1513217527.326 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:12:07.557Z,1513217527.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:07.708Z,1513217527.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:07.731Z,1513217527.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:08.353Z,1513217528.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:09.152Z,1513217529.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:09.946Z,1513217529.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:10.742Z,1513217530.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:11.537Z,1513217531.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:12.333Z,1513217532.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:12.901Z,1513217532.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:13.305Z,1513217533.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:13.709Z,1513217533.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:14.113Z,1513217534.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:14.519Z,1513217534.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:14.925Z,1513217534.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:15.329Z,1513217535.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:15.733Z,1513217535.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:16.529Z,1513217536.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:17.327Z,1513217537.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:17.733Z,1513217537.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:18.530Z,1513217538.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:19.325Z,1513217539.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:19.729Z,1513217539.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:20.526Z,1513217540.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:21.252Z,1513217541.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:22.045Z,1513217542.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:22.843Z,1513217542.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:23.269Z,1513217543.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:24.065Z,1513217544.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:24.864Z,1513217544.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:25.186Z,1513217545.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:25.197Z,1513217545.197 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:12:25.198Z,1513217545.198 [BPC1] Communications Fault, FailCount= 3
2017-12-14T02:12:25.198Z,1513217545.198 [BPC1](ERROR): Communications Fault
2017-12-14T02:12:25.234Z,1513217545.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:25.256Z,1513217545.256 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:12:25.286Z,1513217545.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:26.081Z,1513217546.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:26.878Z,1513217546.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:27.285Z,1513217547.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.081Z,1513217548.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.400Z,1513217548.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.430Z,1513217548.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:28.515Z,1513217548.515 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0040.lzma
2017-12-14T02:12:28.550Z,1513217548.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.598Z,1513217548.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:28.879Z,1513217548.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.953Z,1513217548.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:28.984Z,1513217548.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:29.014Z,1513217549.014 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:12:29.014Z,1513217549.014 [BPC1] No Fault, FailCount= 3
2017-12-14T02:12:29.263Z,1513217549.263 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0040.lzma.bak
2017-12-14T02:12:29.263Z,1513217549.263 [DataOverHttps](INFO): SBD MOMSN=5437404
2017-12-14T02:12:29.303Z,1513217549.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:29.329Z,1513217549.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:29.375Z,1513217549.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:30.126Z,1513217550.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:30.426Z,1513217550.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:30.440Z,1513217550.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:30.564Z,1513217550.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:30.636Z,1513217550.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:30.922Z,1513217550.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:31.625Z,1513217551.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:32.421Z,1513217552.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:33.218Z,1513217553.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:33.621Z,1513217553.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.031Z,1513217554.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.046Z,1513217554.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:34.164Z,1513217554.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.187Z,1513217554.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:34.417Z,1513217554.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.539Z,1513217554.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.555Z,1513217554.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:34.945Z,1513217554.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:34.982Z,1513217554.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:35.213Z,1513217555.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:35.345Z,1513217555.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:35.360Z,1513217555.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:35.617Z,1513217555.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:35.738Z,1513217555.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:35.760Z,1513217555.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:36.415Z,1513217556.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:37.209Z,1513217557.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:37.616Z,1513217557.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:38.409Z,1513217558.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.205Z,1513217559.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.359Z,1513217559.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.428Z,1513217559.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:39.509Z,1513217559.509 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0041.lzma
2017-12-14T02:12:39.554Z,1513217559.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.580Z,1513217559.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:39.609Z,1513217559.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.890Z,1513217559.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:39.938Z,1513217559.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:40.259Z,1513217560.259 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0041.lzma.bak
2017-12-14T02:12:40.259Z,1513217560.259 [DataOverHttps](INFO): SBD MOMSN=5437406
2017-12-14T02:12:40.297Z,1513217560.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:40.311Z,1513217560.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:40.405Z,1513217560.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:41.202Z,1513217561.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:41.605Z,1513217561.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:41.635Z,1513217561.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:41.651Z,1513217561.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:41.654Z,1513217561.654 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:12:41.654Z,1513217561.654 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:12:41.654Z,1513217561.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:12:41.756Z,1513217561.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:41.783Z,1513217561.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:42.401Z,1513217562.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:43.197Z,1513217563.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:43.601Z,1513217563.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:44.397Z,1513217564.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.131Z,1513217565.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.194Z,1513217565.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.153Z,1513217565.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:45.338Z,1513217565.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.360Z,1513217565.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:45.621Z,1513217565.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.739Z,1513217565.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:45.768Z,1513217565.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:46.128Z,1513217566.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:46.156Z,1513217566.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:46.417Z,1513217566.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:46.519Z,1513217566.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:46.536Z,1513217566.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:46.923Z,1513217566.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:46.978Z,1513217566.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:47.215Z,1513217567.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:47.322Z,1513217567.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:47.366Z,1513217567.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:47.617Z,1513217567.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:47.737Z,1513217567.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:47.777Z,1513217567.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:48.138Z,1513217568.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:48.172Z,1513217568.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:48.413Z,1513217568.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:48.534Z,1513217568.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:48.563Z,1513217568.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:48.940Z,1513217568.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:48.947Z,1513217568.947 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T02:12:48.968Z,1513217568.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:49.209Z,1513217569.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:49.327Z,1513217569.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:49.358Z,1513217569.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:49.613Z,1513217569.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:49.724Z,1513217569.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:49.752Z,1513217569.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:50.124Z,1513217570.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:50.184Z,1513217570.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:50.410Z,1513217570.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:50.521Z,1513217570.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:50.551Z,1513217570.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:50.956Z,1513217570.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:51.025Z,1513217571.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:51.205Z,1513217571.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:51.335Z,1513217571.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:51.363Z,1513217571.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:51.609Z,1513217571.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:51.737Z,1513217571.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:51.828Z,1513217571.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:52.121Z,1513217572.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:52.147Z,1513217572.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:52.405Z,1513217572.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:52.522Z,1513217572.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:52.612Z,1513217572.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:52.934Z,1513217572.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:52.955Z,1513217572.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:53.201Z,1513217573.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:53.319Z,1513217573.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:53.356Z,1513217573.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:53.605Z,1513217573.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:53.726Z,1513217573.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:53.750Z,1513217573.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:54.151Z,1513217574.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:54.182Z,1513217574.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:54.401Z,1513217574.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:54.543Z,1513217574.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:54.557Z,1513217574.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:54.937Z,1513217574.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:54.959Z,1513217574.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:55.197Z,1513217575.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:55.317Z,1513217575.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:55.353Z,1513217575.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:55.601Z,1513217575.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:55.733Z,1513217575.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:55.756Z,1513217575.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:56.130Z,1513217576.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:56.158Z,1513217576.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:56.397Z,1513217576.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:56.526Z,1513217576.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:56.559Z,1513217576.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:56.950Z,1513217576.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:56.965Z,1513217576.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:57.194Z,1513217577.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:57.347Z,1513217577.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:57.371Z,1513217577.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:57.597Z,1513217577.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:57.740Z,1513217577.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:57.755Z,1513217577.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:58.124Z,1513217578.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:58.154Z,1513217578.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:58.393Z,1513217578.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:58.508Z,1513217578.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:58.548Z,1513217578.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:58.925Z,1513217578.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:58.944Z,1513217578.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:59.191Z,1513217579.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:59.327Z,1513217579.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:59.350Z,1513217579.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:12:59.601Z,1513217579.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:59.716Z,1513217579.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:12:59.756Z,1513217579.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:00.144Z,1513217580.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:00.159Z,1513217580.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:00.397Z,1513217580.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:00.569Z,1513217580.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:00.600Z,1513217580.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:00.936Z,1513217580.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:00.994Z,1513217580.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:01.196Z,1513217581.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:01.314Z,1513217581.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:01.359Z,1513217581.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:01.609Z,1513217581.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:01.715Z,1513217581.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:01.751Z,1513217581.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:02.120Z,1513217582.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:02.154Z,1513217582.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:02.406Z,1513217582.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:02.518Z,1513217582.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:02.555Z,1513217582.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:02.935Z,1513217582.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:02.971Z,1513217582.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:03.201Z,1513217583.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:03.342Z,1513217583.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:03.349Z,1513217583.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x21472 got:0x49334
2017-12-14T02:13:03.391Z,1513217583.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:03.605Z,1513217583.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:03.763Z,1513217583.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:03.794Z,1513217583.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:04.119Z,1513217584.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:04.155Z,1513217584.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:04.401Z,1513217584.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:04.516Z,1513217584.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:04.550Z,1513217584.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:04.917Z,1513217584.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:04.963Z,1513217584.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:05.197Z,1513217585.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:05.316Z,1513217585.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:05.362Z,1513217585.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:05.601Z,1513217585.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:05.725Z,1513217585.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:05.749Z,1513217585.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:06.146Z,1513217586.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:06.164Z,1513217586.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:06.397Z,1513217586.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:06.541Z,1513217586.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:06.556Z,1513217586.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:06.945Z,1513217586.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:06.972Z,1513217586.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:07.193Z,1513217587.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:07.329Z,1513217587.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:07.361Z,1513217587.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:07.597Z,1513217587.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:07.719Z,1513217587.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:07.767Z,1513217587.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:08.126Z,1513217588.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:08.168Z,1513217588.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:08.393Z,1513217588.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:08.519Z,1513217588.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:08.555Z,1513217588.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:08.936Z,1513217588.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:08.950Z,1513217588.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:09.189Z,1513217589.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:09.331Z,1513217589.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:09.370Z,1513217589.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:09.593Z,1513217589.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:09.728Z,1513217589.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:09.751Z,1513217589.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:10.148Z,1513217590.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:10.180Z,1513217590.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:10.390Z,1513217590.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:10.539Z,1513217590.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:10.624Z,1513217590.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:10.953Z,1513217590.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:10.993Z,1513217590.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:11.185Z,1513217591.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:11.341Z,1513217591.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:11.356Z,1513217591.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:11.589Z,1513217591.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:11.733Z,1513217591.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:11.787Z,1513217591.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:12.141Z,1513217592.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:12.163Z,1513217592.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:12.385Z,1513217592.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:12.538Z,1513217592.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:12.561Z,1513217592.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:12.923Z,1513217592.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:12.960Z,1513217592.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:13.183Z,1513217593.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:13.370Z,1513217593.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:13.459Z,1513217593.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:13.738Z,1513217593.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:13.753Z,1513217593.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:13.977Z,1513217593.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:14.162Z,1513217594.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:14.215Z,1513217594.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:14.542Z,1513217594.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:14.563Z,1513217594.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:14.773Z,1513217594.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:14.945Z,1513217594.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:15.038Z,1513217595.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:15.317Z,1513217595.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:15.346Z,1513217595.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:15.571Z,1513217595.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:15.715Z,1513217595.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:15.755Z,1513217595.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:16.116Z,1513217596.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:16.150Z,1513217596.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:16.365Z,1513217596.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:16.532Z,1513217596.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:16.590Z,1513217596.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:16.959Z,1513217596.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:17.034Z,1513217597.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:17.161Z,1513217597.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:17.337Z,1513217597.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:17.368Z,1513217597.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:17.743Z,1513217597.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:17.749Z,1513217597.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x58137 got:0x91
2017-12-14T02:13:17.794Z,1513217597.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:17.957Z,1513217597.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:18.115Z,1513217598.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:18.155Z,1513217598.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:18.523Z,1513217598.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:18.549Z,1513217598.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:18.753Z,1513217598.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:18.930Z,1513217598.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:18.971Z,1513217598.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:19.348Z,1513217599.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:19.354Z,1513217599.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x1008 got:0x6977
2017-12-14T02:13:19.375Z,1513217599.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:19.549Z,1513217599.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:19.747Z,1513217599.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:19.787Z,1513217599.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:20.123Z,1513217600.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:20.146Z,1513217600.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:20.346Z,1513217600.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:20.531Z,1513217600.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:20.568Z,1513217600.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:20.927Z,1513217600.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:20.940Z,1513217600.940 [PNI_TCM](ERROR): CRC does not match. Expected:0x12061 got:0x7233
2017-12-14T02:13:20.966Z,1513217600.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:21.141Z,1513217601.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:21.337Z,1513217601.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:21.343Z,1513217601.343 [PNI_TCM](ERROR): CRC does not match. Expected:0x55771 got:0x31
2017-12-14T02:13:21.378Z,1513217601.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:21.722Z,1513217601.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:21.761Z,1513217601.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:21.937Z,1513217601.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:22.138Z,1513217602.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:22.159Z,1513217602.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:22.541Z,1513217602.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:22.555Z,1513217602.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:22.733Z,1513217602.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:22.946Z,1513217602.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:22.981Z,1513217602.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:23.319Z,1513217603.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:23.433Z,1513217603.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:23.531Z,1513217603.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:23.716Z,1513217603.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:23.755Z,1513217603.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:24.119Z,1513217604.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:24.160Z,1513217604.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:24.325Z,1513217604.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:24.551Z,1513217604.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:24.656Z,1513217604.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:24.952Z,1513217604.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:24.975Z,1513217604.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:25.121Z,1513217605.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:25.339Z,1513217605.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:25.363Z,1513217605.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:25.725Z,1513217605.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:25.798Z,1513217605.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:25.918Z,1513217605.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.145Z,1513217606.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.175Z,1513217606.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:26.321Z,1513217606.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.525Z,1513217606.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.551Z,1513217606.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:26.725Z,1513217606.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.918Z,1513217606.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:26.949Z,1513217606.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:27.129Z,1513217607.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:27.341Z,1513217607.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:27.356Z,1513217607.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:27.533Z,1513217607.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:27.715Z,1513217607.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:27.750Z,1513217607.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:27.937Z,1513217607.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.141Z,1513217608.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.148Z,1513217608.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x4360 got:0x49060
2017-12-14T02:13:28.167Z,1513217608.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:28.341Z,1513217608.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.536Z,1513217608.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.560Z,1513217608.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:28.746Z,1513217608.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.928Z,1513217608.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:28.956Z,1513217608.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:29.149Z,1513217609.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:29.345Z,1513217609.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:29.391Z,1513217609.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:29.613Z,1513217609.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:29.740Z,1513217609.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:29.759Z,1513217609.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:30.116Z,1513217610.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:30.155Z,1513217610.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:30.409Z,1513217610.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:30.515Z,1513217610.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:30.559Z,1513217610.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:30.947Z,1513217610.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:30.971Z,1513217610.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:31.205Z,1513217611.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:31.336Z,1513217611.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:31.363Z,1513217611.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:31.609Z,1513217611.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:31.738Z,1513217611.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:31.763Z,1513217611.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:32.118Z,1513217612.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:32.162Z,1513217612.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:32.406Z,1513217612.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:32.564Z,1513217612.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:32.602Z,1513217612.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:32.923Z,1513217612.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:32.964Z,1513217612.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:33.201Z,1513217613.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:33.316Z,1513217613.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:33.354Z,1513217613.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:33.605Z,1513217613.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:33.715Z,1513217613.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:33.746Z,1513217613.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:34.165Z,1513217614.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:34.239Z,1513217614.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:34.403Z,1513217614.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:34.535Z,1513217614.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:34.565Z,1513217614.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:34.927Z,1513217614.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:34.973Z,1513217614.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:35.197Z,1513217615.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:35.322Z,1513217615.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:35.350Z,1513217615.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:35.601Z,1513217615.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:35.753Z,1513217615.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:35.831Z,1513217615.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:36.137Z,1513217616.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:36.152Z,1513217616.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:36.397Z,1513217616.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:36.515Z,1513217616.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:36.556Z,1513217616.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:36.937Z,1513217616.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:36.987Z,1513217616.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:37.193Z,1513217617.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:37.339Z,1513217617.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:37.368Z,1513217617.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:37.597Z,1513217617.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:37.741Z,1513217617.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:37.795Z,1513217617.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:38.119Z,1513217618.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:38.163Z,1513217618.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:38.393Z,1513217618.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:38.519Z,1513217618.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:38.551Z,1513217618.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:38.991Z,1513217618.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:39.047Z,1513217619.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:39.191Z,1513217619.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:39.324Z,1513217619.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:39.362Z,1513217619.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:39.597Z,1513217619.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:39.722Z,1513217619.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:39.770Z,1513217619.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:40.130Z,1513217620.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:40.152Z,1513217620.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:40.393Z,1513217620.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:40.533Z,1513217620.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:40.547Z,1513217620.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:40.934Z,1513217620.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:40.948Z,1513217620.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:41.191Z,1513217621.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:41.323Z,1513217621.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:41.371Z,1513217621.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:41.613Z,1513217621.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:41.726Z,1513217621.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:41.750Z,1513217621.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:42.133Z,1513217622.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:42.179Z,1513217622.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:42.409Z,1513217622.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:43.207Z,1513217623.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:43.618Z,1513217623.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:44.413Z,1513217624.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:45.209Z,1513217625.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:45.613Z,1513217625.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:45.613Z,1513217625.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:45.639Z,1513217625.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:45.758Z,1513217625.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:45.830Z,1513217625.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:46.109Z,1513217626.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:46.150Z,1513217626.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:46.409Z,1513217626.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:46.509Z,1513217626.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:46.550Z,1513217626.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:46.905Z,1513217626.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:46.946Z,1513217626.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:47.205Z,1513217627.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:47.298Z,1513217627.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:47.331Z,1513217627.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:47.609Z,1513217627.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:47.702Z,1513217627.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:47.717Z,1513217627.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:48.106Z,1513217628.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:48.127Z,1513217628.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:48.405Z,1513217628.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:48.540Z,1513217628.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:48.574Z,1513217628.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:48.925Z,1513217628.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:48.962Z,1513217628.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:49.201Z,1513217629.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:49.287Z,1513217629.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:49.331Z,1513217629.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:49.605Z,1513217629.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:49.688Z,1513217629.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:49.714Z,1513217629.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:50.089Z,1513217630.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:50.115Z,1513217630.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:50.401Z,1513217630.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:50.484Z,1513217630.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:50.530Z,1513217630.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:50.918Z,1513217630.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:50.934Z,1513217630.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:51.199Z,1513217631.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:51.307Z,1513217631.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:51.337Z,1513217631.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:51.601Z,1513217631.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:51.732Z,1513217631.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:51.771Z,1513217631.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:52.087Z,1513217632.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:52.135Z,1513217632.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:52.397Z,1513217632.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:52.492Z,1513217632.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:52.506Z,1513217632.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:52.969Z,1513217632.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:53.011Z,1513217633.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:53.193Z,1513217633.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:53.287Z,1513217633.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:53.315Z,1513217633.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:53.597Z,1513217633.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:53.706Z,1513217633.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:53.739Z,1513217633.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:54.113Z,1513217634.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:54.170Z,1513217634.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:54.393Z,1513217634.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:54.497Z,1513217634.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:54.524Z,1513217634.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:54.892Z,1513217634.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:54.931Z,1513217634.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:55.191Z,1513217635.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:55.288Z,1513217635.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:55.323Z,1513217635.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:55.601Z,1513217635.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:55.692Z,1513217635.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:55.723Z,1513217635.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:56.107Z,1513217636.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:56.122Z,1513217636.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:56.397Z,1513217636.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:56.512Z,1513217636.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:56.567Z,1513217636.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:56.960Z,1513217636.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:56.976Z,1513217636.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:57.202Z,1513217637.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:57.307Z,1513217637.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:57.339Z,1513217637.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:57.609Z,1513217637.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:57.692Z,1513217637.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:57.767Z,1513217637.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:58.088Z,1513217638.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:58.119Z,1513217638.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:58.405Z,1513217638.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:58.491Z,1513217638.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:58.543Z,1513217638.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:58.938Z,1513217638.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:58.991Z,1513217638.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:59.204Z,1513217639.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:59.323Z,1513217639.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:59.384Z,1513217639.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:13:59.609Z,1513217639.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:59.713Z,1513217639.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:13:59.739Z,1513217639.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:00.091Z,1513217640.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:00.131Z,1513217640.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:00.407Z,1513217640.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:00.491Z,1513217640.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:00.531Z,1513217640.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:00.921Z,1513217640.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:00.943Z,1513217640.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:01.201Z,1513217641.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:01.316Z,1513217641.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:01.339Z,1513217641.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:01.353Z,1513217641.353 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T02:14:01.353Z,1513217641.353 [DropWeight] No Fault, FailCount= 1
2017-12-14T02:14:01.608Z,1513217641.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:01.717Z,1513217641.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:01.738Z,1513217641.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:02.098Z,1513217642.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:02.168Z,1513217642.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:02.401Z,1513217642.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:02.484Z,1513217642.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:02.512Z,1513217642.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:02.912Z,1513217642.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:02.948Z,1513217642.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:03.197Z,1513217643.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:03.293Z,1513217643.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:03.331Z,1513217643.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:03.601Z,1513217643.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:03.691Z,1513217643.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:03.725Z,1513217643.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:04.105Z,1513217644.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:04.119Z,1513217644.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:04.397Z,1513217644.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:04.501Z,1513217644.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:04.515Z,1513217644.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:04.937Z,1513217644.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:04.960Z,1513217644.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:05.193Z,1513217645.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:05.324Z,1513217645.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:05.367Z,1513217645.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:05.597Z,1513217645.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:05.687Z,1513217645.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:05.713Z,1513217645.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:06.084Z,1513217646.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:06.115Z,1513217646.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:06.394Z,1513217646.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:06.488Z,1513217646.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:06.527Z,1513217646.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:06.959Z,1513217646.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:06.995Z,1513217646.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:07.189Z,1513217647.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:07.311Z,1513217647.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:07.345Z,1513217647.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:07.594Z,1513217647.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:07.714Z,1513217647.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:07.771Z,1513217647.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:08.121Z,1513217648.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:08.144Z,1513217648.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:08.389Z,1513217648.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:08.507Z,1513217648.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:08.570Z,1513217648.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:08.891Z,1513217648.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:08.918Z,1513217648.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:09.187Z,1513217649.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:09.292Z,1513217649.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:09.330Z,1513217649.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:09.599Z,1513217649.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:09.691Z,1513217649.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:09.724Z,1513217649.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:10.106Z,1513217650.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:10.121Z,1513217650.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:10.393Z,1513217650.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:10.515Z,1513217650.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:10.543Z,1513217650.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:10.892Z,1513217650.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:10.919Z,1513217650.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:11.191Z,1513217651.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:11.291Z,1513217651.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:11.324Z,1513217651.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:11.617Z,1513217651.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:11.710Z,1513217651.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:11.744Z,1513217651.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:12.093Z,1513217652.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:12.176Z,1513217652.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:12.415Z,1513217652.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:12.495Z,1513217652.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:12.534Z,1513217652.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:12.905Z,1513217652.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:12.943Z,1513217652.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:13.209Z,1513217653.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:13.310Z,1513217653.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:13.351Z,1513217653.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:13.613Z,1513217653.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:13.706Z,1513217653.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:13.743Z,1513217653.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:14.110Z,1513217654.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:14.145Z,1513217654.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:14.409Z,1513217654.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:14.498Z,1513217654.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:14.521Z,1513217654.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:14.950Z,1513217654.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:14.999Z,1513217654.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:15.205Z,1513217655.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:15.299Z,1513217655.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:15.343Z,1513217655.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:15.609Z,1513217655.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:15.696Z,1513217655.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:15.711Z,1513217655.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:16.102Z,1513217656.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:16.124Z,1513217656.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:16.405Z,1513217656.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:16.506Z,1513217656.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:16.551Z,1513217656.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:16.923Z,1513217656.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:16.959Z,1513217656.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:17.201Z,1513217657.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:17.291Z,1513217657.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:17.345Z,1513217657.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:17.605Z,1513217657.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:17.699Z,1513217657.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:17.722Z,1513217657.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:18.109Z,1513217658.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:18.157Z,1513217658.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:18.402Z,1513217658.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:18.487Z,1513217658.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:18.515Z,1513217658.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:18.914Z,1513217658.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:18.981Z,1513217658.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:19.197Z,1513217659.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:19.306Z,1513217659.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:19.335Z,1513217659.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:19.601Z,1513217659.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:19.706Z,1513217659.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:19.774Z,1513217659.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:20.102Z,1513217660.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:20.148Z,1513217660.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:20.397Z,1513217660.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:20.489Z,1513217660.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:20.546Z,1513217660.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:20.950Z,1513217660.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:21.004Z,1513217661.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:21.193Z,1513217661.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:21.309Z,1513217661.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:21.379Z,1513217661.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:21.597Z,1513217661.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:21.706Z,1513217661.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:21.720Z,1513217661.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:22.109Z,1513217662.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:22.130Z,1513217662.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:22.393Z,1513217662.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:22.515Z,1513217662.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:22.534Z,1513217662.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:22.891Z,1513217662.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:22.935Z,1513217662.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:23.191Z,1513217663.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:23.289Z,1513217663.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:23.325Z,1513217663.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:23.617Z,1513217663.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:23.691Z,1513217663.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:23.721Z,1513217663.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:24.107Z,1513217664.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:24.141Z,1513217664.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:24.413Z,1513217664.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:24.507Z,1513217664.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:24.582Z,1513217664.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:24.906Z,1513217664.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:24.943Z,1513217664.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:25.215Z,1513217665.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:25.297Z,1513217665.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:25.332Z,1513217665.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:25.617Z,1513217665.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:25.693Z,1513217665.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:25.708Z,1513217665.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:26.096Z,1513217666.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:26.111Z,1513217666.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:26.413Z,1513217666.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:26.495Z,1513217666.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:26.514Z,1513217666.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:26.924Z,1513217666.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:26.951Z,1513217666.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:27.209Z,1513217667.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:27.302Z,1513217667.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:27.340Z,1513217667.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:27.613Z,1513217667.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:27.743Z,1513217667.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:27.791Z,1513217667.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:28.094Z,1513217668.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:28.127Z,1513217668.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:28.409Z,1513217668.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:28.494Z,1513217668.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:28.508Z,1513217668.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:28.920Z,1513217668.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:28.958Z,1513217668.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:29.206Z,1513217669.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:29.306Z,1513217669.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:29.355Z,1513217669.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:29.355Z,1513217669.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2017-12-14T02:14:29.355Z,1513217669.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:14:29.369Z,1513217669.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:14:29.609Z,1513217669.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:29.699Z,1513217669.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:29.766Z,1513217669.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:14:29.766Z,1513217669.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2017-12-14T02:14:30.101Z,1513217670.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:30.116Z,1513217670.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:14:30.116Z,1513217670.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:14:30.117Z,1513217670.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:14:30.118Z,1513217670.118 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:30.118Z,1513217670.118 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2017-12-14T02:14:30.118Z,1513217670.118 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:14:30.122Z,1513217670.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:30.123Z,1513217670.123 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2017-12-14T02:14:30.123Z,1513217670.123 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:14:30.156Z,1513217670.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:14:30.161Z,1513217670.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:14:30.406Z,1513217670.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:30.509Z,1513217670.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:30.532Z,1513217670.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:30.568Z,1513217670.568 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:14:30.568Z,1513217670.568 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2017-12-14T02:14:30.569Z,1513217670.569 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:14:30.569Z,1513217670.569 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2017-12-14T02:14:30.952Z,1513217670.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:30.000Z,1513217671.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:31.000Z,1513217671.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:14:31.009Z,1513217671.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:14:31.009Z,1513217671.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:14:31.010Z,1513217671.010 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:14:31.010Z,1513217671.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:14:31.010Z,1513217671.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:14:31.201Z,1513217671.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:31.287Z,1513217671.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:31.326Z,1513217671.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:31.605Z,1513217671.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:31.691Z,1513217671.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:31.718Z,1513217671.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:32.095Z,1513217672.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:32.138Z,1513217672.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:32.401Z,1513217672.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:32.487Z,1513217672.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:32.507Z,1513217672.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:32.922Z,1513217672.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:32.948Z,1513217672.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:33.197Z,1513217673.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:33.301Z,1513217673.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:33.336Z,1513217673.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:33.601Z,1513217673.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:33.706Z,1513217673.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:33.738Z,1513217673.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:34.098Z,1513217674.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:34.182Z,1513217674.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:34.397Z,1513217674.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:34.493Z,1513217674.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:34.507Z,1513217674.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:34.957Z,1513217674.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:34.993Z,1513217674.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:35.193Z,1513217675.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:35.290Z,1513217675.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:35.336Z,1513217675.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:35.597Z,1513217675.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:35.710Z,1513217675.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:35.746Z,1513217675.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:36.098Z,1513217676.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:36.113Z,1513217676.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:36.394Z,1513217676.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:36.503Z,1513217676.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:36.566Z,1513217676.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:36.893Z,1513217676.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:36.908Z,1513217676.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:37.191Z,1513217677.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:37.296Z,1513217677.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:37.311Z,1513217677.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:37.601Z,1513217677.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:37.729Z,1513217677.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:37.779Z,1513217677.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:38.119Z,1513217678.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:38.160Z,1513217678.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:38.397Z,1513217678.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:38.518Z,1513217678.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:38.535Z,1513217678.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:38.911Z,1513217678.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:38.962Z,1513217678.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:39.199Z,1513217679.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:39.287Z,1513217679.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:39.314Z,1513217679.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:39.605Z,1513217679.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:39.688Z,1513217679.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:39.715Z,1513217679.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:40.109Z,1513217680.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:40.130Z,1513217680.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:40.401Z,1513217680.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:40.491Z,1513217680.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:40.535Z,1513217680.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:40.958Z,1513217680.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:41.012Z,1513217681.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:41.197Z,1513217681.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:41.311Z,1513217681.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:41.352Z,1513217681.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:41.601Z,1513217681.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:41.707Z,1513217681.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:41.736Z,1513217681.736 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:14:41.736Z,1513217681.736 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:14:41.737Z,1513217681.737 [BPC1](ERROR): Data Fault
2017-12-14T02:14:41.754Z,1513217681.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:41.786Z,1513217681.786 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:14:42.087Z,1513217682.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:42.127Z,1513217682.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:42.397Z,1513217682.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:42.488Z,1513217682.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:42.514Z,1513217682.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:43.196Z,1513217683.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:43.601Z,1513217683.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:44.397Z,1513217684.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:45.196Z,1513217685.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:45.601Z,1513217685.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:46.142Z,1513217686.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:46.166Z,1513217686.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:46.179Z,1513217686.179 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:14:46.179Z,1513217686.179 [BPC1] No Fault, FailCount= 1
2017-12-14T02:14:46.278Z,1513217686.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:46.366Z,1513217686.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:46.397Z,1513217686.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:46.638Z,1513217686.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:46.671Z,1513217686.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:47.056Z,1513217687.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:47.070Z,1513217687.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:47.195Z,1513217687.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:47.430Z,1513217687.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:47.473Z,1513217687.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:47.597Z,1513217687.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:47.819Z,1513217687.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:47.834Z,1513217687.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:48.220Z,1513217688.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:48.235Z,1513217688.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:48.396Z,1513217688.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:48.616Z,1513217688.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:48.635Z,1513217688.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:49.038Z,1513217689.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:49.065Z,1513217689.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:49.189Z,1513217689.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:49.434Z,1513217689.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:49.467Z,1513217689.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:49.595Z,1513217689.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:49.834Z,1513217689.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:49.865Z,1513217689.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:50.225Z,1513217690.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:50.239Z,1513217690.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:50.389Z,1513217690.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:50.623Z,1513217690.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:50.682Z,1513217690.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:51.026Z,1513217691.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:51.041Z,1513217691.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:51.187Z,1513217691.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:51.432Z,1513217691.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:51.467Z,1513217691.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:51.609Z,1513217691.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:51.829Z,1513217691.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:51.845Z,1513217691.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:52.226Z,1513217692.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:52.240Z,1513217692.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:52.405Z,1513217692.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:52.637Z,1513217692.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:52.671Z,1513217692.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:53.025Z,1513217693.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:53.040Z,1513217693.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:53.208Z,1513217693.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:53.426Z,1513217693.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:53.441Z,1513217693.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:53.613Z,1513217693.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:53.825Z,1513217693.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:53.871Z,1513217693.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:54.224Z,1513217694.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:54.244Z,1513217694.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:54.409Z,1513217694.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:54.617Z,1513217694.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:54.672Z,1513217694.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:55.025Z,1513217695.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:55.040Z,1513217695.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:55.205Z,1513217695.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:55.437Z,1513217695.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:55.452Z,1513217695.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:55.609Z,1513217695.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:55.829Z,1513217695.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:55.844Z,1513217695.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:56.215Z,1513217696.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:56.248Z,1513217696.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:56.405Z,1513217696.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:56.619Z,1513217696.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:56.645Z,1513217696.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:57.017Z,1513217697.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:57.089Z,1513217697.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:57.202Z,1513217697.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:57.415Z,1513217697.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:57.451Z,1513217697.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:57.605Z,1513217697.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:57.843Z,1513217697.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:57.863Z,1513217697.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:58.223Z,1513217698.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:58.259Z,1513217698.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:58.401Z,1513217698.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:58.630Z,1513217698.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:58.656Z,1513217698.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:59.041Z,1513217699.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:59.057Z,1513217699.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:59.197Z,1513217699.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:59.415Z,1513217699.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:59.451Z,1513217699.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:14:59.601Z,1513217699.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:59.815Z,1513217699.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:14:59.830Z,1513217699.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:00.247Z,1513217700.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:00.274Z,1513217700.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:00.399Z,1513217700.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:00.620Z,1513217700.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:00.644Z,1513217700.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:01.028Z,1513217701.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:01.048Z,1513217701.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:01.193Z,1513217701.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:01.434Z,1513217701.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:01.448Z,1513217701.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:01.597Z,1513217701.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:01.830Z,1513217701.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:01.845Z,1513217701.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:02.227Z,1513217702.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:02.241Z,1513217702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:02.394Z,1513217702.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:02.626Z,1513217702.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:02.655Z,1513217702.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:03.022Z,1513217703.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:03.043Z,1513217703.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:03.189Z,1513217703.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:03.445Z,1513217703.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:03.481Z,1513217703.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:03.593Z,1513217703.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:03.838Z,1513217703.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:03.853Z,1513217703.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:04.238Z,1513217704.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:04.253Z,1513217704.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:04.389Z,1513217704.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:04.638Z,1513217704.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:04.659Z,1513217704.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:05.031Z,1513217705.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:05.045Z,1513217705.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:05.187Z,1513217705.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:05.418Z,1513217705.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:05.449Z,1513217705.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:05.597Z,1513217705.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:05.822Z,1513217705.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:05.842Z,1513217705.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:06.230Z,1513217706.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:06.245Z,1513217706.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:06.393Z,1513217706.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:06.625Z,1513217706.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:06.703Z,1513217706.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:07.047Z,1513217707.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:07.103Z,1513217707.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:07.191Z,1513217707.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:07.453Z,1513217707.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:07.468Z,1513217707.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:07.609Z,1513217707.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:07.839Z,1513217707.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:07.907Z,1513217707.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:08.221Z,1513217708.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:08.235Z,1513217708.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:08.405Z,1513217708.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:08.621Z,1513217708.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:08.671Z,1513217708.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:09.026Z,1513217709.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:09.041Z,1513217709.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:09.201Z,1513217709.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:09.426Z,1513217709.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:09.441Z,1513217709.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:09.605Z,1513217709.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:09.838Z,1513217709.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:09.879Z,1513217709.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:10.230Z,1513217710.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:10.245Z,1513217710.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:10.403Z,1513217710.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:10.637Z,1513217710.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:10.672Z,1513217710.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:11.024Z,1513217711.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:11.039Z,1513217711.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:11.197Z,1513217711.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:11.422Z,1513217711.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:11.445Z,1513217711.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:11.601Z,1513217711.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:11.828Z,1513217711.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:11.842Z,1513217711.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:12.228Z,1513217712.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:12.244Z,1513217712.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:12.397Z,1513217712.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:12.626Z,1513217712.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:12.641Z,1513217712.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:13.053Z,1513217713.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:13.106Z,1513217713.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:13.194Z,1513217713.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:13.447Z,1513217713.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:13.467Z,1513217713.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:13.597Z,1513217713.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:13.839Z,1513217713.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:13.854Z,1513217713.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:14.216Z,1513217714.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:14.252Z,1513217714.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:14.393Z,1513217714.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:14.613Z,1513217714.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:14.650Z,1513217714.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:15.016Z,1513217715.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:15.043Z,1513217715.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:15.189Z,1513217715.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:15.437Z,1513217715.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:15.452Z,1513217715.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:15.593Z,1513217715.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:15.839Z,1513217715.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:15.854Z,1513217715.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:16.244Z,1513217716.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:16.258Z,1513217716.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:16.389Z,1513217716.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:16.629Z,1513217716.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:16.662Z,1513217716.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:17.015Z,1513217717.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:17.106Z,1513217717.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:17.186Z,1513217717.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:17.415Z,1513217717.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:17.450Z,1513217717.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:17.589Z,1513217717.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:17.823Z,1513217717.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:17.844Z,1513217717.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:18.229Z,1513217718.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:18.245Z,1513217718.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:18.385Z,1513217718.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:18.628Z,1513217718.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:18.643Z,1513217718.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:19.033Z,1513217719.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:19.048Z,1513217719.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:19.183Z,1513217719.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:19.433Z,1513217719.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:19.455Z,1513217719.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:19.597Z,1513217719.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:19.832Z,1513217719.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:19.847Z,1513217719.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:20.224Z,1513217720.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:20.239Z,1513217720.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:20.393Z,1513217720.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:20.625Z,1513217720.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:20.640Z,1513217720.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:21.031Z,1513217721.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:21.046Z,1513217721.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:21.191Z,1513217721.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:21.418Z,1513217721.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:21.453Z,1513217721.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:21.601Z,1513217721.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:21.834Z,1513217721.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:21.850Z,1513217721.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:22.238Z,1513217722.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:22.253Z,1513217722.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:22.398Z,1513217722.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:22.635Z,1513217722.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:22.650Z,1513217722.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:23.035Z,1513217723.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:23.050Z,1513217723.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:23.193Z,1513217723.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:23.450Z,1513217723.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:23.482Z,1513217723.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:23.598Z,1513217723.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:23.816Z,1513217723.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:23.853Z,1513217723.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:24.221Z,1513217724.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:24.235Z,1513217724.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:24.393Z,1513217724.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:24.624Z,1513217724.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:24.663Z,1513217724.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:25.038Z,1513217725.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:25.067Z,1513217725.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:25.190Z,1513217725.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:25.443Z,1513217725.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:25.475Z,1513217725.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:25.593Z,1513217725.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:25.839Z,1513217725.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:25.865Z,1513217725.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:26.219Z,1513217726.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:26.235Z,1513217726.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:26.389Z,1513217726.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:26.659Z,1513217726.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:26.708Z,1513217726.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:27.026Z,1513217727.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:27.041Z,1513217727.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:27.185Z,1513217727.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:27.426Z,1513217727.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:27.441Z,1513217727.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:27.589Z,1513217727.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:27.837Z,1513217727.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:27.872Z,1513217727.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:28.230Z,1513217728.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:28.246Z,1513217728.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:28.385Z,1513217728.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:28.638Z,1513217728.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:28.699Z,1513217728.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:29.023Z,1513217729.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:29.095Z,1513217729.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:29.182Z,1513217729.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:29.425Z,1513217729.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:29.440Z,1513217729.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:29.585Z,1513217729.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:29.820Z,1513217729.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:29.871Z,1513217729.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:30.233Z,1513217730.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:30.247Z,1513217730.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:30.381Z,1513217730.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:30.626Z,1513217730.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:30.682Z,1513217730.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:31.025Z,1513217731.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:31.058Z,1513217731.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:31.177Z,1513217731.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:31.431Z,1513217731.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:31.463Z,1513217731.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:31.581Z,1513217731.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:31.834Z,1513217731.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:31.848Z,1513217731.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:32.228Z,1513217732.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:32.242Z,1513217732.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:32.377Z,1513217732.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:32.609Z,1513217732.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:32.645Z,1513217732.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:33.042Z,1513217733.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:33.082Z,1513217733.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:33.175Z,1513217733.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:33.415Z,1513217733.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:33.451Z,1513217733.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:33.617Z,1513217733.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:33.833Z,1513217733.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:33.859Z,1513217733.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:34.233Z,1513217734.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:34.263Z,1513217734.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:34.413Z,1513217734.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:34.633Z,1513217734.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:34.663Z,1513217734.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:35.015Z,1513217735.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:35.031Z,1513217735.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:35.210Z,1513217735.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:35.421Z,1513217735.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:35.436Z,1513217735.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:35.613Z,1513217735.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:35.819Z,1513217735.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:35.834Z,1513217735.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:36.227Z,1513217736.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:36.263Z,1513217736.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:36.410Z,1513217736.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:36.629Z,1513217736.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:36.643Z,1513217736.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:37.029Z,1513217737.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:37.044Z,1513217737.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:37.217Z,1513217737.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:37.429Z,1513217737.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:37.444Z,1513217737.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:37.621Z,1513217737.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:37.830Z,1513217737.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:37.844Z,1513217737.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:38.227Z,1513217738.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:38.241Z,1513217738.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:38.417Z,1513217738.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:38.622Z,1513217738.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:38.636Z,1513217738.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:39.030Z,1513217739.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:39.078Z,1513217739.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:39.213Z,1513217739.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:39.434Z,1513217739.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:39.481Z,1513217739.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:39.617Z,1513217739.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:39.841Z,1513217739.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:39.855Z,1513217739.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:40.241Z,1513217740.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:40.256Z,1513217740.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:40.413Z,1513217740.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:40.638Z,1513217740.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:40.653Z,1513217740.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:41.015Z,1513217741.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:41.047Z,1513217741.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:41.209Z,1513217741.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:41.415Z,1513217741.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:41.446Z,1513217741.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:41.613Z,1513217741.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:41.840Z,1513217741.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:41.859Z,1513217741.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:42.230Z,1513217742.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:42.244Z,1513217742.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:42.410Z,1513217742.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:42.649Z,1513217742.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:42.693Z,1513217742.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:43.205Z,1513217743.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:43.609Z,1513217743.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:44.405Z,1513217744.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:45.201Z,1513217745.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:45.605Z,1513217745.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:45.995Z,1513217745.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:46.038Z,1513217746.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:46.152Z,1513217746.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:46.168Z,1513217746.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:46.401Z,1513217746.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:46.540Z,1513217746.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:46.560Z,1513217746.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:46.921Z,1513217746.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:46.959Z,1513217746.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:47.199Z,1513217747.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:47.342Z,1513217747.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:47.357Z,1513217747.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:47.609Z,1513217747.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:47.728Z,1513217747.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:47.787Z,1513217747.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:48.149Z,1513217748.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:48.171Z,1513217748.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:48.405Z,1513217748.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:48.536Z,1513217748.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:48.562Z,1513217748.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:48.935Z,1513217748.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:48.960Z,1513217748.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:49.203Z,1513217749.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:49.322Z,1513217749.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:49.382Z,1513217749.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:49.613Z,1513217749.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:49.722Z,1513217749.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:49.756Z,1513217749.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:50.130Z,1513217750.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:50.161Z,1513217750.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:50.409Z,1513217750.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:50.530Z,1513217750.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:50.572Z,1513217750.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:50.933Z,1513217750.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:51.042Z,1513217751.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:51.237Z,1513217751.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:51.332Z,1513217751.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:51.344Z,1513217751.344 [PNI_TCM](ERROR): CRC does not match. Expected:0x60112 got:0x46785
2017-12-14T02:15:51.371Z,1513217751.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:51.641Z,1513217751.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:51.741Z,1513217751.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:51.812Z,1513217751.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:52.128Z,1513217752.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:52.147Z,1513217752.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:52.437Z,1513217752.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:52.522Z,1513217752.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:52.583Z,1513217752.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:52.924Z,1513217752.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:52.952Z,1513217752.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:53.233Z,1513217753.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:53.320Z,1513217753.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:53.367Z,1513217753.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:53.735Z,1513217753.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:53.754Z,1513217753.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:54.029Z,1513217754.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:54.134Z,1513217754.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:54.178Z,1513217754.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:54.532Z,1513217754.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:54.551Z,1513217754.551 [PNI_TCM](ERROR): CRC does not match. Expected:0x15363 got:0x28118
2017-12-14T02:15:54.579Z,1513217754.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:54.653Z,1513217754.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:54.942Z,1513217754.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:54.957Z,1513217754.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:55.250Z,1513217755.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:55.329Z,1513217755.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:55.344Z,1513217755.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:55.712Z,1513217755.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:55.757Z,1513217755.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:56.045Z,1513217756.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:56.131Z,1513217756.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:56.152Z,1513217756.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:56.523Z,1513217756.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:56.550Z,1513217756.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:56.844Z,1513217756.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:56.942Z,1513217756.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:56.956Z,1513217756.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:57.258Z,1513217757.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:57.341Z,1513217757.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:57.384Z,1513217757.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:57.742Z,1513217757.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:57.758Z,1513217757.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:58.053Z,1513217758.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:58.112Z,1513217758.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:58.146Z,1513217758.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:58.530Z,1513217758.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:58.551Z,1513217758.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:58.849Z,1513217758.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:58.986Z,1513217758.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:59.036Z,1513217759.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:59.311Z,1513217759.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:59.321Z,1513217759.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:59.348Z,1513217759.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:15:59.734Z,1513217759.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:15:59.761Z,1513217759.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:00.118Z,1513217760.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:00.162Z,1513217760.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:00.206Z,1513217760.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:00.532Z,1513217760.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:00.572Z,1513217760.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:00.913Z,1513217760.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:00.926Z,1513217760.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:00.980Z,1513217760.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:01.330Z,1513217761.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:01.344Z,1513217761.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:01.606Z,1513217761.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:01.728Z,1513217761.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:01.743Z,1513217761.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:02.129Z,1513217762.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:02.166Z,1513217762.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:02.401Z,1513217762.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:02.541Z,1513217762.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:02.571Z,1513217762.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:02.938Z,1513217762.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:02.968Z,1513217762.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:03.207Z,1513217763.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:03.329Z,1513217763.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:03.344Z,1513217763.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:03.613Z,1513217763.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:03.731Z,1513217763.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:03.784Z,1513217763.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:04.124Z,1513217764.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:04.165Z,1513217764.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:04.409Z,1513217764.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:04.528Z,1513217764.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:04.536Z,1513217764.536 [PNI_TCM](ERROR): CRC does not match. Expected:0x20983 got:0x61747
2017-12-14T02:16:04.570Z,1513217764.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:04.932Z,1513217764.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:04.948Z,1513217764.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:05.205Z,1513217765.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:05.329Z,1513217765.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:05.367Z,1513217765.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:05.609Z,1513217765.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:05.726Z,1513217765.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:05.748Z,1513217765.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:06.131Z,1513217766.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:06.146Z,1513217766.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:06.406Z,1513217766.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:06.520Z,1513217766.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:06.541Z,1513217766.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:06.980Z,1513217766.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:07.025Z,1513217767.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:07.203Z,1513217767.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:07.332Z,1513217767.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:07.361Z,1513217767.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:07.609Z,1513217767.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:07.734Z,1513217767.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:07.749Z,1513217767.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:08.131Z,1513217768.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:08.154Z,1513217768.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:08.405Z,1513217768.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:08.529Z,1513217768.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:08.574Z,1513217768.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:08.928Z,1513217768.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:08.984Z,1513217768.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:09.201Z,1513217769.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:09.316Z,1513217769.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:09.339Z,1513217769.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:09.605Z,1513217769.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:09.720Z,1513217769.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:09.740Z,1513217769.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:10.150Z,1513217770.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:10.172Z,1513217770.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:10.401Z,1513217770.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:10.542Z,1513217770.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:10.557Z,1513217770.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:10.945Z,1513217770.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:10.959Z,1513217770.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:11.197Z,1513217771.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:11.320Z,1513217771.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:11.359Z,1513217771.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:11.601Z,1513217771.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:11.719Z,1513217771.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:11.759Z,1513217771.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:12.120Z,1513217772.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:12.152Z,1513217772.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:12.397Z,1513217772.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:12.520Z,1513217772.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:12.562Z,1513217772.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:12.951Z,1513217772.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:13.049Z,1513217773.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:13.194Z,1513217773.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:13.372Z,1513217773.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:13.399Z,1513217773.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:13.597Z,1513217773.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:13.743Z,1513217773.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:13.811Z,1513217773.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:14.125Z,1513217774.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:14.144Z,1513217774.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:14.393Z,1513217774.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:14.527Z,1513217774.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:14.579Z,1513217774.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:14.922Z,1513217774.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:14.963Z,1513217774.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:15.191Z,1513217775.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:15.325Z,1513217775.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:15.348Z,1513217775.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:15.604Z,1513217775.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:15.781Z,1513217775.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:15.830Z,1513217775.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:16.132Z,1513217776.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:16.147Z,1513217776.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:16.397Z,1513217776.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:16.550Z,1513217776.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:16.575Z,1513217776.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:16.931Z,1513217776.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:16.969Z,1513217776.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:17.195Z,1513217777.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:17.334Z,1513217777.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:17.378Z,1513217777.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:17.606Z,1513217777.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:17.736Z,1513217777.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:17.763Z,1513217777.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:18.134Z,1513217778.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:18.180Z,1513217778.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:18.401Z,1513217778.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:18.529Z,1513217778.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:18.548Z,1513217778.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x6190 got:0x16850
2017-12-14T02:16:18.591Z,1513217778.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:18.944Z,1513217778.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:18.986Z,1513217778.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:19.198Z,1513217779.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:19.346Z,1513217779.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:19.383Z,1513217779.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:19.601Z,1513217779.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:19.758Z,1513217779.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:19.815Z,1513217779.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:20.116Z,1513217780.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:20.176Z,1513217780.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:20.398Z,1513217780.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:20.516Z,1513217780.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:20.596Z,1513217780.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:20.926Z,1513217780.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:20.971Z,1513217780.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:21.194Z,1513217781.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:21.318Z,1513217781.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:21.375Z,1513217781.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:21.598Z,1513217781.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:21.748Z,1513217781.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:21.780Z,1513217781.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:22.133Z,1513217782.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:22.171Z,1513217782.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:22.394Z,1513217782.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:22.538Z,1513217782.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:22.582Z,1513217782.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:22.932Z,1513217782.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:22.990Z,1513217782.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:23.190Z,1513217783.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:23.317Z,1513217783.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:23.367Z,1513217783.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:23.594Z,1513217783.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:23.722Z,1513217783.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:23.763Z,1513217783.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:24.136Z,1513217784.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:24.175Z,1513217784.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:24.389Z,1513217784.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:24.543Z,1513217784.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:24.571Z,1513217784.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:24.957Z,1513217784.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:24.999Z,1513217784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:25.185Z,1513217785.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:25.339Z,1513217785.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:25.375Z,1513217785.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:25.589Z,1513217785.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:25.759Z,1513217785.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:25.796Z,1513217785.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:26.134Z,1513217786.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:26.194Z,1513217786.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:26.386Z,1513217786.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:26.525Z,1513217786.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:26.583Z,1513217786.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:26.960Z,1513217786.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:26.971Z,1513217786.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x21758 got:0x65408
2017-12-14T02:16:27.038Z,1513217787.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:27.182Z,1513217787.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:27.342Z,1513217787.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:27.372Z,1513217787.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:27.585Z,1513217787.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:27.750Z,1513217787.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:27.773Z,1513217787.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:28.141Z,1513217788.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:28.174Z,1513217788.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:28.382Z,1513217788.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:28.534Z,1513217788.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:28.578Z,1513217788.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:28.931Z,1513217788.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:28.959Z,1513217788.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:29.179Z,1513217789.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:29.318Z,1513217789.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:29.378Z,1513217789.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:29.598Z,1513217789.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:29.722Z,1513217789.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:29.768Z,1513217789.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:30.137Z,1513217790.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:30.172Z,1513217790.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:30.393Z,1513217790.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:30.535Z,1513217790.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:30.567Z,1513217790.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:30.954Z,1513217790.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:30.986Z,1513217790.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:31.191Z,1513217791.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:31.365Z,1513217791.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:31.426Z,1513217791.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:31.621Z,1513217791.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:31.734Z,1513217791.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:31.781Z,1513217791.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:32.124Z,1513217792.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:32.185Z,1513217792.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:32.419Z,1513217792.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:32.518Z,1513217792.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:32.571Z,1513217792.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:32.947Z,1513217792.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:32.971Z,1513217792.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:33.214Z,1513217793.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:33.368Z,1513217793.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:33.401Z,1513217793.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:33.618Z,1513217793.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:33.745Z,1513217793.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:33.782Z,1513217793.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:34.131Z,1513217794.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:34.163Z,1513217794.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:34.416Z,1513217794.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:34.546Z,1513217794.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:34.655Z,1513217794.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:34.917Z,1513217794.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:34.996Z,1513217794.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:35.211Z,1513217795.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:35.325Z,1513217795.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:35.379Z,1513217795.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:35.618Z,1513217795.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:35.740Z,1513217795.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:35.803Z,1513217795.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:36.168Z,1513217796.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:36.201Z,1513217796.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:36.416Z,1513217796.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:36.544Z,1513217796.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:36.605Z,1513217796.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:36.941Z,1513217796.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:36.963Z,1513217796.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:37.209Z,1513217797.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:37.315Z,1513217797.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:37.355Z,1513217797.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:37.613Z,1513217797.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:37.715Z,1513217797.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:37.748Z,1513217797.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:38.115Z,1513217798.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:38.155Z,1513217798.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:38.409Z,1513217798.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:38.520Z,1513217798.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:38.547Z,1513217798.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:38.935Z,1513217798.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:38.979Z,1513217798.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:39.206Z,1513217799.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:39.355Z,1513217799.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:39.365Z,1513217799.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x8201 got:0x65472
2017-12-14T02:16:39.403Z,1513217799.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:39.609Z,1513217799.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:39.746Z,1513217799.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:39.767Z,1513217799.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:40.173Z,1513217800.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:40.188Z,1513217800.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:40.405Z,1513217800.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:40.521Z,1513217800.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:40.560Z,1513217800.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:40.955Z,1513217800.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:40.994Z,1513217800.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:41.201Z,1513217801.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:41.315Z,1513217801.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:41.359Z,1513217801.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:41.605Z,1513217801.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:41.731Z,1513217801.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:41.763Z,1513217801.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:42.144Z,1513217802.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:42.169Z,1513217802.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:42.401Z,1513217802.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:42.551Z,1513217802.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:42.582Z,1513217802.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:42.931Z,1513217802.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:42.963Z,1513217802.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:43.206Z,1513217803.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:43.613Z,1513217803.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:44.409Z,1513217804.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:45.206Z,1513217805.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:45.613Z,1513217805.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:46.409Z,1513217806.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:46.632Z,1513217806.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:46.676Z,1513217806.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:46.782Z,1513217806.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:46.877Z,1513217806.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:47.147Z,1513217807.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:47.176Z,1513217807.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:47.213Z,1513217807.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:47.547Z,1513217807.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:47.574Z,1513217807.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:47.617Z,1513217807.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:47.934Z,1513217807.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:47.949Z,1513217807.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:48.332Z,1513217808.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:48.348Z,1513217808.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:48.413Z,1513217808.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:48.733Z,1513217808.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:48.748Z,1513217808.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:49.141Z,1513217809.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:49.203Z,1513217809.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:49.210Z,1513217809.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:49.546Z,1513217809.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:49.576Z,1513217809.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:49.946Z,1513217809.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:49.978Z,1513217809.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:50.005Z,1513217810.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:50.324Z,1513217810.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:50.351Z,1513217810.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:50.728Z,1513217810.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:50.759Z,1513217810.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:50.801Z,1513217810.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:51.124Z,1513217811.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:51.167Z,1513217811.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:51.522Z,1513217811.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:51.537Z,1513217811.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:51.597Z,1513217811.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:51.934Z,1513217811.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:51.969Z,1513217811.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:52.339Z,1513217812.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:52.366Z,1513217812.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:52.393Z,1513217812.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:52.759Z,1513217812.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:52.774Z,1513217812.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:53.132Z,1513217813.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:53.156Z,1513217813.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:53.190Z,1513217813.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:53.533Z,1513217813.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:53.549Z,1513217813.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:53.942Z,1513217813.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:53.959Z,1513217813.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:53.985Z,1513217813.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:54.331Z,1513217814.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:54.348Z,1513217814.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:54.731Z,1513217814.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:54.747Z,1513217814.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:54.781Z,1513217814.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:55.156Z,1513217815.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:55.199Z,1513217815.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:55.537Z,1513217815.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:55.578Z,1513217815.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:55.587Z,1513217815.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:55.940Z,1513217815.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:55.968Z,1513217815.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:56.327Z,1513217816.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:56.363Z,1513217816.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:56.374Z,1513217816.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:56.731Z,1513217816.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:56.773Z,1513217816.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:57.134Z,1513217817.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:57.171Z,1513217817.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:57.195Z,1513217817.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:57.541Z,1513217817.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:57.585Z,1513217817.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:57.938Z,1513217817.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:57.953Z,1513217817.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:57.965Z,1513217817.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:58.362Z,1513217818.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:58.458Z,1513217818.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:58.739Z,1513217818.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:58.762Z,1513217818.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:58.766Z,1513217818.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:59.226Z,1513217819.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:59.275Z,1513217819.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:59.548Z,1513217819.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:59.558Z,1513217819.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:59.578Z,1513217819.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:59.923Z,1513217819.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:16:59.959Z,1513217819.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:16:59.962Z,1513217819.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:00.324Z,1513217820.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:00.365Z,1513217820.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:00.378Z,1513217820.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:00.727Z,1513217820.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:00.761Z,1513217820.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:00.769Z,1513217820.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.147Z,1513217821.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.173Z,1513217821.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.329Z,1513217821.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:01.541Z,1513217821.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.577Z,1513217821.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.599Z,1513217821.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:01.946Z,1513217821.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:01.977Z,1513217821.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:01.982Z,1513217821.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:02.331Z,1513217822.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:02.346Z,1513217822.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:02.386Z,1513217822.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:02.735Z,1513217822.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:02.751Z,1513217822.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:03.124Z,1513217823.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:03.152Z,1513217823.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:03.189Z,1513217823.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:03.523Z,1513217823.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:03.556Z,1513217823.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:03.594Z,1513217823.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:03.942Z,1513217823.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:03.975Z,1513217823.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:04.350Z,1513217824.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:04.364Z,1513217824.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:04.389Z,1513217824.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:04.772Z,1513217824.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:04.800Z,1513217824.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:05.124Z,1513217825.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:05.161Z,1513217825.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:05.185Z,1513217825.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:05.527Z,1513217825.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:05.544Z,1513217825.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:05.589Z,1513217825.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:05.923Z,1513217825.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:05.946Z,1513217825.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:06.328Z,1513217826.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:06.364Z,1513217826.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:06.385Z,1513217826.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:06.723Z,1513217826.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:06.763Z,1513217826.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:07.158Z,1513217827.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:07.173Z,1513217827.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:07.182Z,1513217827.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:07.538Z,1513217827.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:07.560Z,1513217827.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:07.585Z,1513217827.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:07.941Z,1513217827.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:07.971Z,1513217827.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:08.330Z,1513217828.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:08.357Z,1513217828.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:08.382Z,1513217828.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:08.731Z,1513217828.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:08.747Z,1513217828.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:09.129Z,1513217829.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:09.144Z,1513217829.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:09.177Z,1513217829.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:09.532Z,1513217829.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:09.582Z,1513217829.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:09.582Z,1513217829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:09.947Z,1513217829.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:09.978Z,1513217829.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:10.341Z,1513217830.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:10.371Z,1513217830.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:10.377Z,1513217830.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:10.734Z,1513217830.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:10.750Z,1513217830.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:11.134Z,1513217831.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:11.175Z,1513217831.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:11.221Z,1513217831.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:11.530Z,1513217831.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:11.546Z,1513217831.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:11.629Z,1513217831.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:11.929Z,1513217831.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:11.945Z,1513217831.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:12.330Z,1513217832.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:12.354Z,1513217832.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:12.425Z,1513217832.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:12.734Z,1513217832.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:12.849Z,1513217832.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:13.134Z,1513217833.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:13.216Z,1513217833.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:13.222Z,1513217833.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:13.549Z,1513217833.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:13.564Z,1513217833.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:13.626Z,1513217833.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:13.949Z,1513217833.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:13.964Z,1513217833.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:14.335Z,1513217834.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:14.353Z,1513217834.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:14.422Z,1513217834.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:14.723Z,1513217834.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:14.759Z,1513217834.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:15.124Z,1513217835.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:15.160Z,1513217835.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:15.217Z,1513217835.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:15.523Z,1513217835.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:15.560Z,1513217835.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:15.621Z,1513217835.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:15.956Z,1513217835.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:15.971Z,1513217835.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:16.342Z,1513217836.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:16.375Z,1513217836.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:16.417Z,1513217836.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:16.738Z,1513217836.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:16.772Z,1513217836.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:17.131Z,1513217837.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:17.146Z,1513217837.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:17.213Z,1513217837.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:17.549Z,1513217837.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:17.578Z,1513217837.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:17.618Z,1513217837.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:17.932Z,1513217837.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:17.948Z,1513217837.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:18.335Z,1513217838.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:18.376Z,1513217838.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:18.413Z,1513217838.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:18.724Z,1513217838.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:18.756Z,1513217838.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:19.133Z,1513217839.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:19.167Z,1513217839.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:19.210Z,1513217839.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:19.551Z,1513217839.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:19.568Z,1513217839.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:19.613Z,1513217839.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:19.946Z,1513217839.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:19.965Z,1513217839.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:20.323Z,1513217840.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:20.350Z,1513217840.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:20.409Z,1513217840.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:20.763Z,1513217840.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:20.879Z,1513217840.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:21.130Z,1513217841.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:21.166Z,1513217841.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:21.205Z,1513217841.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:21.528Z,1513217841.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:21.595Z,1513217841.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:21.609Z,1513217841.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:21.946Z,1513217841.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:21.973Z,1513217841.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:22.342Z,1513217842.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:22.405Z,1513217842.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:22.415Z,1513217842.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:22.741Z,1513217842.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:22.815Z,1513217842.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:23.132Z,1513217843.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:23.179Z,1513217843.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:23.201Z,1513217843.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:23.526Z,1513217843.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:23.559Z,1513217843.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:23.605Z,1513217843.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:23.930Z,1513217843.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:23.953Z,1513217843.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:24.332Z,1513217844.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:24.352Z,1513217844.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:24.401Z,1513217844.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:24.736Z,1513217844.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:24.751Z,1513217844.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:25.141Z,1513217845.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:25.199Z,1513217845.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:25.252Z,1513217845.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:25.541Z,1513217845.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:25.563Z,1513217845.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:25.628Z,1513217845.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:25.940Z,1513217845.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:25.963Z,1513217845.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:26.331Z,1513217846.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:26.347Z,1513217846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:26.421Z,1513217846.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:26.732Z,1513217846.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:26.747Z,1513217846.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:27.218Z,1513217847.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:27.219Z,1513217847.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:27.346Z,1513217847.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:27.536Z,1513217847.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:27.559Z,1513217847.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:27.637Z,1513217847.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:27.948Z,1513217847.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:27.967Z,1513217847.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:28.350Z,1513217848.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:28.371Z,1513217848.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:28.433Z,1513217848.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:28.749Z,1513217848.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:28.870Z,1513217848.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:29.123Z,1513217849.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:29.148Z,1513217849.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:29.229Z,1513217849.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:29.525Z,1513217849.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:29.540Z,1513217849.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:29.633Z,1513217849.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:29.964Z,1513217849.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:29.983Z,1513217849.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:30.336Z,1513217850.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:30.351Z,1513217850.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:30.351Z,1513217850.351 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2017-12-14T02:17:30.351Z,1513217850.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:17:30.364Z,1513217850.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:17:30.429Z,1513217850.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:30.723Z,1513217850.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:30.762Z,1513217850.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:17:30.762Z,1513217850.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2017-12-14T02:17:31.142Z,1513217851.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:31.168Z,1513217851.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:17:31.169Z,1513217851.169 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:17:31.169Z,1513217851.169 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:17:31.171Z,1513217851.171 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:31.171Z,1513217851.171 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2017-12-14T02:17:31.171Z,1513217851.171 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:17:31.173Z,1513217851.173 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:31.173Z,1513217851.173 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2017-12-14T02:17:31.173Z,1513217851.173 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:17:31.198Z,1513217851.198 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:17:31.198Z,1513217851.198 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:17:31.226Z,1513217851.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:31.546Z,1513217851.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:31.596Z,1513217851.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:31.619Z,1513217851.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:17:31.619Z,1513217851.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2017-12-14T02:17:31.620Z,1513217851.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:17:31.620Z,1513217851.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2017-12-14T02:17:31.629Z,1513217851.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:31.946Z,1513217851.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:31.970Z,1513217851.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:31.970Z,1513217851.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:17:31.971Z,1513217851.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:17:31.971Z,1513217851.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:17:31.971Z,1513217851.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:17:31.972Z,1513217851.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:17:31.972Z,1513217851.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:17:32.335Z,1513217852.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:32.366Z,1513217852.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:32.425Z,1513217852.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:32.732Z,1513217852.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:32.770Z,1513217852.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:33.132Z,1513217853.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:33.150Z,1513217853.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:33.221Z,1513217853.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:33.530Z,1513217853.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:33.546Z,1513217853.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:33.625Z,1513217853.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:33.942Z,1513217853.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:33.963Z,1513217853.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:34.341Z,1513217854.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:34.364Z,1513217854.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:34.421Z,1513217854.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:34.741Z,1513217854.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:34.756Z,1513217854.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:35.124Z,1513217855.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:35.153Z,1513217855.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:35.217Z,1513217855.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:35.535Z,1513217855.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:35.552Z,1513217855.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:35.621Z,1513217855.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:35.923Z,1513217855.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:35.954Z,1513217855.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:36.328Z,1513217856.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:36.354Z,1513217856.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:36.418Z,1513217856.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:36.766Z,1513217856.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:36.802Z,1513217856.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:37.155Z,1513217857.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:37.175Z,1513217857.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:37.213Z,1513217857.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:37.538Z,1513217857.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:37.559Z,1513217857.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:37.617Z,1513217857.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:37.939Z,1513217857.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:37.954Z,1513217857.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:38.334Z,1513217858.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:38.349Z,1513217858.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:38.414Z,1513217858.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:38.728Z,1513217858.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:38.841Z,1513217858.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:39.137Z,1513217859.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:39.211Z,1513217859.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:39.220Z,1513217859.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:39.532Z,1513217859.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:39.551Z,1513217859.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:39.629Z,1513217859.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:39.947Z,1513217859.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:39.967Z,1513217859.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:40.351Z,1513217860.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:40.371Z,1513217860.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:40.425Z,1513217860.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:40.739Z,1513217860.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:40.766Z,1513217860.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:41.123Z,1513217861.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:41.211Z,1513217861.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:41.222Z,1513217861.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:41.527Z,1513217861.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:41.553Z,1513217861.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:41.625Z,1513217861.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:41.924Z,1513217861.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:41.956Z,1513217861.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:41.963Z,1513217861.963 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:17:41.963Z,1513217861.963 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:17:41.963Z,1513217861.963 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:17:41.963Z,1513217861.963 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:17:42.329Z,1513217862.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:42.361Z,1513217862.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:42.365Z,1513217862.365 [Default:CheckIn:D] Stopped
2017-12-14T02:17:42.365Z,1513217862.365 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:17:42.421Z,1513217862.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:42.723Z,1513217862.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:42.762Z,1513217862.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:42.765Z,1513217862.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 104.449577 min 
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn:E] Stopped
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn] Stopped
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn](INFO): Running loop #11
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn] Running Loop=11
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:17:42.766Z,1513217862.766 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:17:43.154Z,1513217863.154 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T02:17:43.155Z,1513217863.155 [NAL9602] Data Fault, FailCount= 5
2017-12-14T02:17:43.155Z,1513217863.155 [NAL9602](ERROR): Data Fault
2017-12-14T02:17:43.190Z,1513217863.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:43.218Z,1513217863.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:43.260Z,1513217863.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:43.298Z,1513217863.298 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T02:17:43.298Z,1513217863.298 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T02:17:43.621Z,1513217863.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:44.418Z,1513217864.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:45.213Z,1513217865.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:45.617Z,1513217865.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:46.414Z,1513217866.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:46.678Z,1513217866.678 [NAL9602](INFO): Powering down
2017-12-14T02:17:46.707Z,1513217866.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:46.776Z,1513217866.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:46.788Z,1513217866.788 [CBIT](INFO): Critical error at 20171214T021743
2017-12-14T02:17:46.904Z,1513217866.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:46.959Z,1513217866.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:47.209Z,1513217867.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:47.255Z,1513217867.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:47.328Z,1513217867.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:47.615Z,1513217867.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:47.660Z,1513217867.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:47.691Z,1513217867.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:48.052Z,1513217868.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:48.091Z,1513217868.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:48.409Z,1513217868.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:48.454Z,1513217868.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:48.485Z,1513217868.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:48.890Z,1513217868.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:48.942Z,1513217868.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:49.205Z,1513217869.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:49.255Z,1513217869.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:49.286Z,1513217869.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:49.609Z,1513217869.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:49.656Z,1513217869.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:49.723Z,1513217869.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:50.059Z,1513217870.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:50.086Z,1513217870.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:50.405Z,1513217870.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:50.452Z,1513217870.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:50.475Z,1513217870.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:50.851Z,1513217870.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:50.936Z,1513217870.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:51.201Z,1513217871.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:51.263Z,1513217871.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:51.286Z,1513217871.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:51.605Z,1513217871.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:51.665Z,1513217871.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:51.680Z,1513217871.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:52.064Z,1513217872.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:52.078Z,1513217872.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:52.401Z,1513217872.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:52.461Z,1513217872.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:52.488Z,1513217872.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:52.864Z,1513217872.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:52.887Z,1513217872.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:53.199Z,1513217873.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:53.256Z,1513217873.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:53.292Z,1513217873.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:53.610Z,1513217873.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:53.658Z,1513217873.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:53.691Z,1513217873.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:54.055Z,1513217874.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:54.086Z,1513217874.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:54.405Z,1513217874.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:54.459Z,1513217874.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:54.490Z,1513217874.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:54.858Z,1513217874.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:54.895Z,1513217874.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:55.203Z,1513217875.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:55.269Z,1513217875.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:55.295Z,1513217875.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:55.609Z,1513217875.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:55.662Z,1513217875.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:55.676Z,1513217875.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:56.060Z,1513217876.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:56.075Z,1513217876.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:56.405Z,1513217876.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:56.463Z,1513217876.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:56.512Z,1513217876.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:56.906Z,1513217876.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:56.932Z,1513217876.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:57.201Z,1513217877.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:57.271Z,1513217877.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:57.311Z,1513217877.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:57.605Z,1513217877.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:57.663Z,1513217877.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:57.678Z,1513217877.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:58.062Z,1513217878.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:58.076Z,1513217878.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:58.401Z,1513217878.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:58.466Z,1513217878.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:58.487Z,1513217878.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:58.902Z,1513217878.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:58.922Z,1513217878.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:59.197Z,1513217879.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:59.282Z,1513217879.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:59.316Z,1513217879.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:17:59.601Z,1513217879.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:59.663Z,1513217879.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:17:59.684Z,1513217879.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:00.062Z,1513217880.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:00.077Z,1513217880.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:00.399Z,1513217880.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:00.463Z,1513217880.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:00.487Z,1513217880.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:00.888Z,1513217880.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:00.919Z,1513217880.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:01.193Z,1513217881.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:01.254Z,1513217881.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:01.290Z,1513217881.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:01.597Z,1513217881.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:01.658Z,1513217881.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:01.690Z,1513217881.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:02.059Z,1513217882.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:02.090Z,1513217882.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:02.393Z,1513217882.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:02.493Z,1513217882.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:02.538Z,1513217882.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:02.905Z,1513217882.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:02.951Z,1513217882.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:03.189Z,1513217883.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:03.262Z,1513217883.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:03.297Z,1513217883.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:03.593Z,1513217883.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:03.662Z,1513217883.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:03.681Z,1513217883.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:04.066Z,1513217884.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:04.080Z,1513217884.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:04.389Z,1513217884.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:04.459Z,1513217884.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:04.486Z,1513217884.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:04.906Z,1513217884.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:04.950Z,1513217884.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:05.185Z,1513217885.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:05.261Z,1513217885.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:05.299Z,1513217885.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:05.589Z,1513217885.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:05.695Z,1513217885.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:05.719Z,1513217885.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:06.067Z,1513217886.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:06.098Z,1513217886.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:06.389Z,1513217886.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:06.466Z,1513217886.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:06.481Z,1513217886.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:06.863Z,1513217886.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:06.880Z,1513217886.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:07.198Z,1513217887.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:07.345Z,1513217887.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:07.372Z,1513217887.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:07.605Z,1513217887.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:07.658Z,1513217887.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:07.691Z,1513217887.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:08.058Z,1513217888.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:08.093Z,1513217888.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:08.401Z,1513217888.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:08.466Z,1513217888.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:08.549Z,1513217888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:08.913Z,1513217888.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:08.941Z,1513217888.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:09.199Z,1513217889.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:09.269Z,1513217889.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:09.338Z,1513217889.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:09.609Z,1513217889.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:09.666Z,1513217889.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:09.680Z,1513217889.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:10.054Z,1513217890.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:10.104Z,1513217890.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:10.405Z,1513217890.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:10.456Z,1513217890.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:10.482Z,1513217890.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:10.892Z,1513217890.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:10.945Z,1513217890.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:11.201Z,1513217891.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:11.268Z,1513217891.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:11.284Z,1513217891.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:11.605Z,1513217891.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:11.663Z,1513217891.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:11.677Z,1513217891.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:12.110Z,1513217892.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:12.161Z,1513217892.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:12.403Z,1513217892.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:12.465Z,1513217892.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:12.487Z,1513217892.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:12.888Z,1513217892.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:12.920Z,1513217892.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:13.197Z,1513217893.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:13.320Z,1513217893.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:13.361Z,1513217893.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:13.658Z,1513217893.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:13.686Z,1513217893.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:13.701Z,1513217893.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:14.058Z,1513217894.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:14.083Z,1513217894.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:14.458Z,1513217894.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:14.483Z,1513217894.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:14.498Z,1513217894.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:14.893Z,1513217894.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:14.924Z,1513217894.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:15.249Z,1513217895.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:15.263Z,1513217895.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:15.293Z,1513217895.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:15.655Z,1513217895.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:15.682Z,1513217895.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:15.697Z,1513217895.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:16.062Z,1513217896.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:16.093Z,1513217896.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:16.459Z,1513217896.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:16.483Z,1513217896.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:16.494Z,1513217896.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:16.908Z,1513217896.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:16.958Z,1513217896.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:17.267Z,1513217897.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:17.281Z,1513217897.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:17.289Z,1513217897.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:17.664Z,1513217897.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:17.721Z,1513217897.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:18.068Z,1513217898.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:18.083Z,1513217898.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:18.085Z,1513217898.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:18.466Z,1513217898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:18.513Z,1513217898.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:18.883Z,1513217898.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:18.888Z,1513217898.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:18.966Z,1513217898.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:19.255Z,1513217899.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:19.299Z,1513217899.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:19.318Z,1513217899.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:19.654Z,1513217899.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:19.688Z,1513217899.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:20.058Z,1513217900.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:20.084Z,1513217900.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:20.113Z,1513217900.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:20.456Z,1513217900.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:20.492Z,1513217900.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:20.855Z,1513217900.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:20.883Z,1513217900.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:20.933Z,1513217900.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:21.257Z,1513217901.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:21.286Z,1513217901.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:21.598Z,1513217901.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:21.659Z,1513217901.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:21.685Z,1513217901.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:22.055Z,1513217902.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:22.096Z,1513217902.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:22.393Z,1513217902.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:22.459Z,1513217902.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:22.523Z,1513217902.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:22.851Z,1513217902.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:22.894Z,1513217902.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:23.191Z,1513217903.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:23.256Z,1513217903.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:23.302Z,1513217903.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:23.605Z,1513217903.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:23.654Z,1513217903.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:23.688Z,1513217903.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:24.054Z,1513217904.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:24.082Z,1513217904.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:24.401Z,1513217904.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:24.458Z,1513217904.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:24.492Z,1513217904.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:24.898Z,1513217904.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:24.948Z,1513217904.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:25.197Z,1513217905.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:25.264Z,1513217905.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:25.287Z,1513217905.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:25.601Z,1513217905.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:25.661Z,1513217905.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:25.707Z,1513217905.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:26.059Z,1513217906.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:26.089Z,1513217906.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:26.397Z,1513217906.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:26.462Z,1513217906.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:26.489Z,1513217906.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:26.903Z,1513217906.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:26.944Z,1513217906.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:27.193Z,1513217907.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:27.271Z,1513217907.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:27.286Z,1513217907.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:27.597Z,1513217907.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:27.668Z,1513217907.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:27.683Z,1513217907.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:28.062Z,1513217908.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:28.080Z,1513217908.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:28.393Z,1513217908.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:28.466Z,1513217908.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:28.480Z,1513217908.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:28.925Z,1513217908.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:28.981Z,1513217908.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:29.189Z,1513217909.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:29.262Z,1513217909.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:29.307Z,1513217909.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:29.593Z,1513217909.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:29.659Z,1513217909.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:29.685Z,1513217909.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:30.054Z,1513217910.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:30.087Z,1513217910.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:30.389Z,1513217910.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:30.458Z,1513217910.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:30.560Z,1513217910.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:30.893Z,1513217910.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:30.913Z,1513217910.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:31.185Z,1513217911.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:31.256Z,1513217911.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:31.307Z,1513217911.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:31.589Z,1513217911.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:31.659Z,1513217911.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:31.691Z,1513217911.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:32.058Z,1513217912.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:32.135Z,1513217912.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:32.385Z,1513217912.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:32.454Z,1513217912.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:32.492Z,1513217912.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:32.854Z,1513217912.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:32.969Z,1513217912.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:33.181Z,1513217913.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:33.264Z,1513217913.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:33.288Z,1513217913.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:33.586Z,1513217913.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:33.662Z,1513217913.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:33.690Z,1513217913.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:34.059Z,1513217914.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:34.093Z,1513217914.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:34.381Z,1513217914.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:34.454Z,1513217914.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:34.472Z,1513217914.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:34.861Z,1513217914.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:34.876Z,1513217914.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:35.179Z,1513217915.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:35.292Z,1513217915.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:35.339Z,1513217915.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:35.597Z,1513217915.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:35.654Z,1513217915.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:35.691Z,1513217915.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:36.058Z,1513217916.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:36.091Z,1513217916.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:36.393Z,1513217916.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:36.508Z,1513217916.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:36.543Z,1513217916.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:36.848Z,1513217916.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:36.862Z,1513217916.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:37.191Z,1513217917.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:37.267Z,1513217917.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:37.307Z,1513217917.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:37.609Z,1513217917.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:37.660Z,1513217917.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:37.683Z,1513217917.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:38.054Z,1513217918.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:38.079Z,1513217918.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:38.405Z,1513217918.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:38.482Z,1513217918.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:38.528Z,1513217918.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:38.893Z,1513217918.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:38.932Z,1513217918.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:39.201Z,1513217919.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:39.254Z,1513217919.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:39.291Z,1513217919.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:39.605Z,1513217919.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:39.653Z,1513217919.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:39.689Z,1513217919.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:40.058Z,1513217920.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:40.090Z,1513217920.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:40.401Z,1513217920.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:40.451Z,1513217920.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:40.492Z,1513217920.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:40.895Z,1513217920.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:40.926Z,1513217920.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:41.200Z,1513217921.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:41.272Z,1513217921.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:41.292Z,1513217921.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:41.605Z,1513217921.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:41.695Z,1513217921.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:41.742Z,1513217921.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:42.063Z,1513217922.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:42.077Z,1513217922.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:42.402Z,1513217922.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:42.469Z,1513217922.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:42.483Z,1513217922.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:42.901Z,1513217922.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:42.948Z,1513217922.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:43.197Z,1513217923.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:43.257Z,1513217923.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:43.295Z,1513217923.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:43.601Z,1513217923.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:44.397Z,1513217924.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:45.193Z,1513217925.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:45.597Z,1513217925.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:46.394Z,1513217926.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:46.796Z,1513217926.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:46.811Z,1513217926.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:46.965Z,1513217926.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:47.008Z,1513217927.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:47.189Z,1513217927.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:47.291Z,1513217927.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:47.327Z,1513217927.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:47.593Z,1513217927.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:47.697Z,1513217927.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:47.713Z,1513217927.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:48.136Z,1513217928.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:48.159Z,1513217928.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:48.389Z,1513217928.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:48.493Z,1513217928.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:48.523Z,1513217928.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:48.900Z,1513217928.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:48.915Z,1513217928.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:49.194Z,1513217929.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:49.296Z,1513217929.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:49.324Z,1513217929.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:49.609Z,1513217929.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:49.690Z,1513217929.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:49.729Z,1513217929.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:50.086Z,1513217930.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:50.112Z,1513217930.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:50.405Z,1513217930.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:50.498Z,1513217930.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:50.512Z,1513217930.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:50.886Z,1513217930.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:50.912Z,1513217930.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:51.203Z,1513217931.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:51.297Z,1513217931.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:51.356Z,1513217931.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:51.613Z,1513217931.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:51.686Z,1513217931.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:51.719Z,1513217931.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:52.086Z,1513217932.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:52.119Z,1513217932.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:52.409Z,1513217932.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:52.487Z,1513217932.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:52.579Z,1513217932.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:52.905Z,1513217932.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:52.948Z,1513217932.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:53.205Z,1513217933.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:53.291Z,1513217933.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:53.335Z,1513217933.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:53.609Z,1513217933.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:53.690Z,1513217933.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:53.744Z,1513217933.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:54.091Z,1513217934.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:54.105Z,1513217934.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:54.405Z,1513217934.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:54.491Z,1513217934.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:54.538Z,1513217934.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:54.922Z,1513217934.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:54.936Z,1513217934.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:55.201Z,1513217935.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:55.291Z,1513217935.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:55.311Z,1513217935.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:55.605Z,1513217935.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:55.686Z,1513217935.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:55.713Z,1513217935.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:56.086Z,1513217936.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:56.123Z,1513217936.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:56.401Z,1513217936.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:56.484Z,1513217936.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:56.511Z,1513217936.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:56.913Z,1513217936.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:56.932Z,1513217936.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:57.197Z,1513217937.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:57.291Z,1513217937.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:57.332Z,1513217937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:57.601Z,1513217937.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:57.690Z,1513217937.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:57.728Z,1513217937.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:58.090Z,1513217938.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:58.104Z,1513217938.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:58.397Z,1513217938.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:58.480Z,1513217938.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:58.550Z,1513217938.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:58.895Z,1513217938.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:58.938Z,1513217938.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:59.193Z,1513217939.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:59.296Z,1513217939.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:59.328Z,1513217939.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:18:59.597Z,1513217939.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:59.700Z,1513217939.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:18:59.715Z,1513217939.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:00.093Z,1513217940.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:00.111Z,1513217940.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:00.393Z,1513217940.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:00.495Z,1513217940.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:00.515Z,1513217940.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:00.536Z,1513217940.536 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:19:00.947Z,1513217940.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:00.979Z,1513217940.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:01.192Z,1513217941.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:01.286Z,1513217941.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:01.312Z,1513217941.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:01.597Z,1513217941.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:01.735Z,1513217941.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:01.780Z,1513217941.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:02.083Z,1513217942.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:02.116Z,1513217942.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:02.395Z,1513217942.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:02.480Z,1513217942.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:02.503Z,1513217942.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:02.890Z,1513217942.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:02.947Z,1513217942.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:03.191Z,1513217943.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:03.285Z,1513217943.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:03.316Z,1513217943.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:03.605Z,1513217943.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:03.690Z,1513217943.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:03.732Z,1513217943.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:04.091Z,1513217944.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:04.137Z,1513217944.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:04.401Z,1513217944.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:04.490Z,1513217944.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:04.530Z,1513217944.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:04.970Z,1513217944.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:04.991Z,1513217944.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:05.199Z,1513217945.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:05.286Z,1513217945.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:05.336Z,1513217945.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:05.611Z,1513217945.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:05.686Z,1513217945.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:05.700Z,1513217945.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:06.094Z,1513217946.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:06.109Z,1513217946.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:06.405Z,1513217946.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:06.499Z,1513217946.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:06.514Z,1513217946.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:06.913Z,1513217946.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:06.946Z,1513217946.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:07.201Z,1513217947.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:07.296Z,1513217947.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:07.351Z,1513217947.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:07.605Z,1513217947.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:07.692Z,1513217947.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:07.711Z,1513217947.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:08.119Z,1513217948.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:08.172Z,1513217948.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:08.401Z,1513217948.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:08.492Z,1513217948.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:08.536Z,1513217948.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:08.900Z,1513217948.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:08.947Z,1513217948.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:09.198Z,1513217949.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:09.290Z,1513217949.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:09.313Z,1513217949.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:09.601Z,1513217949.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:09.697Z,1513217949.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:09.712Z,1513217949.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:10.094Z,1513217950.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:10.122Z,1513217950.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:10.397Z,1513217950.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:10.498Z,1513217950.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:10.519Z,1513217950.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:10.912Z,1513217950.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:10.955Z,1513217950.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:11.193Z,1513217951.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:11.315Z,1513217951.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:11.355Z,1513217951.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:11.597Z,1513217951.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:11.686Z,1513217951.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:11.731Z,1513217951.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:12.086Z,1513217952.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:12.118Z,1513217952.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:12.393Z,1513217952.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:12.486Z,1513217952.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:12.523Z,1513217952.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:12.914Z,1513217952.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:12.932Z,1513217952.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:13.189Z,1513217953.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:13.287Z,1513217953.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:13.333Z,1513217953.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:13.593Z,1513217953.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:13.694Z,1513217953.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:13.738Z,1513217953.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:14.090Z,1513217954.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:14.104Z,1513217954.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:14.389Z,1513217954.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:14.507Z,1513217954.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:14.599Z,1513217954.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:14.952Z,1513217954.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:14.970Z,1513217954.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:15.189Z,1513217955.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:15.291Z,1513217955.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:15.366Z,1513217955.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:15.593Z,1513217955.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:15.684Z,1513217955.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:15.719Z,1513217955.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:16.098Z,1513217956.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:16.114Z,1513217956.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:16.392Z,1513217956.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:16.486Z,1513217956.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:16.550Z,1513217956.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:16.898Z,1513217956.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:16.921Z,1513217956.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:17.187Z,1513217957.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:17.286Z,1513217957.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:17.355Z,1513217957.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:17.605Z,1513217957.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:17.699Z,1513217957.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:17.761Z,1513217957.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:18.087Z,1513217958.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:18.114Z,1513217958.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:18.401Z,1513217958.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:18.490Z,1513217958.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:18.522Z,1513217958.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:18.890Z,1513217958.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:18.904Z,1513217958.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:19.202Z,1513217959.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:19.302Z,1513217959.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:19.346Z,1513217959.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:19.609Z,1513217959.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:19.691Z,1513217959.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:19.711Z,1513217959.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:20.096Z,1513217960.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:20.115Z,1513217960.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:20.405Z,1513217960.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:20.488Z,1513217960.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:20.503Z,1513217960.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:20.914Z,1513217960.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:20.955Z,1513217960.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:21.201Z,1513217961.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:21.285Z,1513217961.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:21.320Z,1513217961.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:21.605Z,1513217961.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:21.690Z,1513217961.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:21.722Z,1513217961.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:22.085Z,1513217962.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:22.119Z,1513217962.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:22.401Z,1513217962.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:22.503Z,1513217962.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:22.517Z,1513217962.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:22.889Z,1513217962.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:22.939Z,1513217962.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:23.198Z,1513217963.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:23.285Z,1513217963.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:23.300Z,1513217963.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:23.601Z,1513217963.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:23.690Z,1513217963.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:23.704Z,1513217963.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:24.140Z,1513217964.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:24.183Z,1513217964.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:24.397Z,1513217964.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:24.493Z,1513217964.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:24.531Z,1513217964.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:24.892Z,1513217964.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:24.931Z,1513217964.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:25.193Z,1513217965.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:25.311Z,1513217965.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:25.376Z,1513217965.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:25.597Z,1513217965.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:25.692Z,1513217965.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:25.708Z,1513217965.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:26.092Z,1513217966.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:26.111Z,1513217966.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:26.393Z,1513217966.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:26.491Z,1513217966.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:26.506Z,1513217966.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:26.897Z,1513217966.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:26.950Z,1513217966.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:27.189Z,1513217967.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:27.298Z,1513217967.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:27.313Z,1513217967.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:27.593Z,1513217967.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:27.697Z,1513217967.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:27.712Z,1513217967.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:28.096Z,1513217968.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:28.119Z,1513217968.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:28.389Z,1513217968.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:28.495Z,1513217968.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:28.509Z,1513217968.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:28.945Z,1513217968.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:28.981Z,1513217968.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:29.185Z,1513217969.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:29.286Z,1513217969.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:29.335Z,1513217969.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:29.589Z,1513217969.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:29.690Z,1513217969.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:29.731Z,1513217969.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:30.091Z,1513217970.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:30.126Z,1513217970.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:30.385Z,1513217970.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:30.526Z,1513217970.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:30.570Z,1513217970.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:30.886Z,1513217970.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:30.932Z,1513217970.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:31.186Z,1513217971.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:31.286Z,1513217971.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:31.331Z,1513217971.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:31.597Z,1513217971.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:31.686Z,1513217971.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:31.700Z,1513217971.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:32.090Z,1513217972.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:32.104Z,1513217972.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:32.394Z,1513217972.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:32.491Z,1513217972.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:32.506Z,1513217972.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:32.891Z,1513217972.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:32.942Z,1513217972.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:33.191Z,1513217973.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:33.298Z,1513217973.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:33.314Z,1513217973.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:33.597Z,1513217973.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:33.708Z,1513217973.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:33.762Z,1513217973.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:34.104Z,1513217974.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:34.123Z,1513217974.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:34.393Z,1513217974.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:34.494Z,1513217974.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:34.528Z,1513217974.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:34.898Z,1513217974.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:34.925Z,1513217974.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:35.189Z,1513217975.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:35.290Z,1513217975.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:35.322Z,1513217975.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:35.593Z,1513217975.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:35.694Z,1513217975.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:35.709Z,1513217975.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:36.090Z,1513217976.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:36.120Z,1513217976.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:36.389Z,1513217976.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:36.494Z,1513217976.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:36.514Z,1513217976.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:36.933Z,1513217976.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:37.001Z,1513217977.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:37.188Z,1513217977.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:37.294Z,1513217977.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:37.370Z,1513217977.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:37.593Z,1513217977.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:37.690Z,1513217977.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:37.724Z,1513217977.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:38.090Z,1513217978.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:38.115Z,1513217978.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:38.389Z,1513217978.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:38.484Z,1513217978.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:38.507Z,1513217978.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:38.888Z,1513217978.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:38.944Z,1513217978.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:39.185Z,1513217979.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:39.291Z,1513217979.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:39.325Z,1513217979.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:39.589Z,1513217979.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:39.688Z,1513217979.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:39.719Z,1513217979.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:40.139Z,1513217980.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:40.194Z,1513217980.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:40.385Z,1513217980.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:40.486Z,1513217980.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:40.516Z,1513217980.516 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:19:40.516Z,1513217980.516 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:19:40.516Z,1513217980.516 [BPC1](ERROR): Communications Fault
2017-12-14T02:19:40.533Z,1513217980.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:40.546Z,1513217980.546 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:19:40.892Z,1513217980.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:40.932Z,1513217980.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:41.181Z,1513217981.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:41.298Z,1513217981.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:41.333Z,1513217981.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:41.585Z,1513217981.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:41.695Z,1513217981.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:41.709Z,1513217981.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:41.755Z,1513217981.755 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:19:41.755Z,1513217981.755 [BPC1] No Fault, FailCount= 1
2017-12-14T02:19:42.095Z,1513217982.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:42.183Z,1513217982.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:42.381Z,1513217982.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:42.493Z,1513217982.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:42.510Z,1513217982.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:42.952Z,1513217982.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:42.971Z,1513217982.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:43.177Z,1513217983.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:43.301Z,1513217983.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:43.355Z,1513217983.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:43.398Z,1513217983.398 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T02:19:43.398Z,1513217983.398 [NAL9602] No Fault, FailCount= 5
2017-12-14T02:19:43.581Z,1513217983.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:44.377Z,1513217984.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:45.175Z,1513217985.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:45.609Z,1513217985.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:46.405Z,1513217986.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:46.771Z,1513217986.771 [NAL9602](INFO): Powering up NAL9602
2017-12-14T02:19:46.798Z,1513217986.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:46.819Z,1513217986.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:46.912Z,1513217986.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:46.959Z,1513217986.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:47.202Z,1513217987.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:47.300Z,1513217987.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:47.335Z,1513217987.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:47.605Z,1513217987.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:47.675Z,1513217987.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:47.707Z,1513217987.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:48.074Z,1513217988.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:48.107Z,1513217988.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:48.401Z,1513217988.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:48.471Z,1513217988.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:48.507Z,1513217988.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:48.889Z,1513217988.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:48.936Z,1513217988.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:49.197Z,1513217989.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:49.280Z,1513217989.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:49.313Z,1513217989.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:49.601Z,1513217989.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:49.713Z,1513217989.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:49.775Z,1513217989.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:50.075Z,1513217990.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:50.092Z,1513217990.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:50.398Z,1513217990.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:50.472Z,1513217990.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:50.533Z,1513217990.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:50.893Z,1513217990.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:50.928Z,1513217990.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:51.193Z,1513217991.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:51.274Z,1513217991.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:51.295Z,1513217991.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:51.597Z,1513217991.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:51.728Z,1513217991.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:51.743Z,1513217991.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:52.080Z,1513217992.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:52.121Z,1513217992.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:52.393Z,1513217992.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:52.479Z,1513217992.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:52.495Z,1513217992.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:52.954Z,1513217992.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:52.990Z,1513217992.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:53.189Z,1513217993.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:53.270Z,1513217993.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:53.312Z,1513217993.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:53.593Z,1513217993.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:53.677Z,1513217993.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:53.691Z,1513217993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:54.077Z,1513217994.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:54.091Z,1513217994.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:54.389Z,1513217994.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:54.475Z,1513217994.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:54.489Z,1513217994.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:54.894Z,1513217994.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:54.931Z,1513217994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:55.185Z,1513217995.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:55.267Z,1513217995.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:55.306Z,1513217995.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:55.589Z,1513217995.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:55.678Z,1513217995.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:55.693Z,1513217995.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:56.078Z,1513217996.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:56.134Z,1513217996.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:56.385Z,1513217996.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:56.467Z,1513217996.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:56.494Z,1513217996.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:56.938Z,1513217996.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:56.953Z,1513217996.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:57.186Z,1513217997.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:57.291Z,1513217997.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:57.327Z,1513217997.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:57.589Z,1513217997.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:57.654Z,1513217997.654 [NAL9602](INFO): NAL9602 initialized
2017-12-14T02:19:57.672Z,1513217997.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:57.711Z,1513217997.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:58.083Z,1513217998.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:58.111Z,1513217998.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:58.385Z,1513217998.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:58.482Z,1513217998.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:58.509Z,1513217998.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:58.886Z,1513217998.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:58.915Z,1513217998.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:59.183Z,1513217999.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:59.285Z,1513217999.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:59.318Z,1513217999.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:19:59.605Z,1513217999.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:59.679Z,1513217999.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:19:59.721Z,1513217999.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:00.075Z,1513218000.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:00.095Z,1513218000.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:00.403Z,1513218000.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:00.480Z,1513218000.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:00.495Z,1513218000.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:00.878Z,1513218000.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:00.886Z,1513218000.886 [BPC1](ERROR): Failed to parse message.
2017-12-14T02:20:00.886Z,1513218000.886 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:20:00.886Z,1513218000.886 [BPC1] Data Fault, FailCount= 2
2017-12-14T02:20:00.886Z,1513218000.886 [BPC1](ERROR): Data Fault
2017-12-14T02:20:00.895Z,1513218000.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:00.933Z,1513218000.933 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:20:01.199Z,1513218001.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:01.282Z,1513218001.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:01.297Z,1513218001.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:01.605Z,1513218001.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:01.682Z,1513218001.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:01.698Z,1513218001.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:02.082Z,1513218002.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:02.097Z,1513218002.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:02.119Z,1513218002.119 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:20:02.119Z,1513218002.119 [BPC1] No Fault, FailCount= 2
2017-12-14T02:20:02.401Z,1513218002.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:02.504Z,1513218002.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:02.639Z,1513218002.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:02.905Z,1513218002.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:02.944Z,1513218002.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:03.197Z,1513218003.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:03.287Z,1513218003.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:03.302Z,1513218003.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:03.601Z,1513218003.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:03.678Z,1513218003.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:03.697Z,1513218003.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:04.084Z,1513218004.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:04.105Z,1513218004.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:04.397Z,1513218004.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:04.485Z,1513218004.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:04.507Z,1513218004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:04.900Z,1513218004.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:04.944Z,1513218004.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:05.193Z,1513218005.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:05.268Z,1513218005.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:05.299Z,1513218005.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:05.597Z,1513218005.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:05.672Z,1513218005.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:05.700Z,1513218005.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:06.067Z,1513218006.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:06.096Z,1513218006.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:06.393Z,1513218006.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:06.467Z,1513218006.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:06.505Z,1513218006.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:06.903Z,1513218006.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:06.923Z,1513218006.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:07.189Z,1513218007.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:07.303Z,1513218007.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:07.404Z,1513218007.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:07.593Z,1513218007.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:07.690Z,1513218007.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:07.746Z,1513218007.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:08.090Z,1513218008.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:08.106Z,1513218008.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:08.389Z,1513218008.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:08.468Z,1513218008.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:08.504Z,1513218008.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:08.911Z,1513218008.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:08.973Z,1513218008.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:09.186Z,1513218009.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:09.271Z,1513218009.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:09.294Z,1513218009.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:09.589Z,1513218009.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:09.675Z,1513218009.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:09.690Z,1513218009.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:10.085Z,1513218010.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:10.100Z,1513218010.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:10.385Z,1513218010.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:10.486Z,1513218010.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:10.500Z,1513218010.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:10.938Z,1513218010.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:10.988Z,1513218010.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:11.181Z,1513218011.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:11.267Z,1513218011.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:11.300Z,1513218011.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:11.585Z,1513218011.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:11.667Z,1513218011.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:11.704Z,1513218011.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:12.070Z,1513218012.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:12.139Z,1513218012.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:12.381Z,1513218012.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:12.468Z,1513218012.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:12.494Z,1513218012.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:12.867Z,1513218012.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:12.895Z,1513218012.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:13.179Z,1513218013.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:13.287Z,1513218013.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:13.311Z,1513218013.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:13.585Z,1513218013.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:13.694Z,1513218013.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:13.708Z,1513218013.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:14.088Z,1513218014.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:14.122Z,1513218014.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:14.381Z,1513218014.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:14.472Z,1513218014.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:14.499Z,1513218014.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:14.868Z,1513218014.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:14.899Z,1513218014.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:15.179Z,1513218015.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:15.299Z,1513218015.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:15.342Z,1513218015.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:15.597Z,1513218015.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:15.674Z,1513218015.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:15.715Z,1513218015.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:16.086Z,1513218016.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:16.124Z,1513218016.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:16.393Z,1513218016.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:16.477Z,1513218016.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:16.492Z,1513218016.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:16.920Z,1513218016.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:16.942Z,1513218016.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:17.190Z,1513218017.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:17.277Z,1513218017.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:17.301Z,1513218017.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:17.593Z,1513218017.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:17.691Z,1513218017.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:17.727Z,1513218017.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:18.074Z,1513218018.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:18.089Z,1513218018.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:18.390Z,1513218018.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:18.500Z,1513218018.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:18.535Z,1513218018.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:18.897Z,1513218018.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:18.937Z,1513218018.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:19.185Z,1513218019.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:19.298Z,1513218019.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:19.339Z,1513218019.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:19.590Z,1513218019.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:19.690Z,1513218019.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:19.723Z,1513218019.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:20.081Z,1513218020.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:20.097Z,1513218020.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:20.385Z,1513218020.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:20.476Z,1513218020.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:20.495Z,1513218020.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:20.893Z,1513218020.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:20.940Z,1513218020.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:21.181Z,1513218021.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:21.272Z,1513218021.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:21.300Z,1513218021.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:21.585Z,1513218021.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:21.689Z,1513218021.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:21.755Z,1513218021.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:22.088Z,1513218022.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:22.102Z,1513218022.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:22.381Z,1513218022.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:22.494Z,1513218022.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:22.520Z,1513218022.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:22.904Z,1513218022.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:22.985Z,1513218022.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:23.177Z,1513218023.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:23.267Z,1513218023.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:23.303Z,1513218023.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:23.581Z,1513218023.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:23.671Z,1513218023.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:23.743Z,1513218023.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:24.069Z,1513218024.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:24.098Z,1513218024.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:24.381Z,1513218024.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:24.467Z,1513218024.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:24.498Z,1513218024.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:24.965Z,1513218024.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:25.004Z,1513218025.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:25.177Z,1513218025.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:25.288Z,1513218025.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:25.335Z,1513218025.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:25.581Z,1513218025.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:25.685Z,1513218025.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:25.721Z,1513218025.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:26.091Z,1513218026.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:26.106Z,1513218026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:26.378Z,1513218026.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:26.467Z,1513218026.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:26.499Z,1513218026.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:26.867Z,1513218026.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:26.895Z,1513218026.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:27.175Z,1513218027.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:27.268Z,1513218027.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:27.295Z,1513218027.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:27.589Z,1513218027.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:27.667Z,1513218027.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:27.699Z,1513218027.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:28.090Z,1513218028.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:28.105Z,1513218028.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:28.385Z,1513218028.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:28.492Z,1513218028.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:28.506Z,1513218028.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:28.892Z,1513218028.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:28.910Z,1513218028.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:29.188Z,1513218029.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:29.298Z,1513218029.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:29.319Z,1513218029.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:29.597Z,1513218029.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:29.671Z,1513218029.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:29.704Z,1513218029.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:30.071Z,1513218030.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:30.103Z,1513218030.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:30.393Z,1513218030.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:30.472Z,1513218030.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:30.503Z,1513218030.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:30.903Z,1513218030.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:30.924Z,1513218030.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:31.189Z,1513218031.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:31.303Z,1513218031.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:31.338Z,1513218031.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:31.338Z,1513218031.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2017-12-14T02:20:31.338Z,1513218031.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:20:31.389Z,1513218031.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:20:31.593Z,1513218031.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:31.700Z,1513218031.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:31.735Z,1513218031.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:20:31.735Z,1513218031.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2017-12-14T02:20:32.095Z,1513218032.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:32.135Z,1513218032.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:20:32.135Z,1513218032.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:20:32.135Z,1513218032.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:20:32.162Z,1513218032.162 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:32.162Z,1513218032.162 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2017-12-14T02:20:32.162Z,1513218032.162 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:20:32.164Z,1513218032.164 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:32.164Z,1513218032.164 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2017-12-14T02:20:32.164Z,1513218032.164 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:20:32.176Z,1513218032.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:20:32.176Z,1513218032.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:20:32.389Z,1513218032.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:32.479Z,1513218032.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:32.500Z,1513218032.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:32.512Z,1513218032.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:20:32.512Z,1513218032.512 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2017-12-14T02:20:32.513Z,1513218032.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:20:32.513Z,1513218032.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2017-12-14T02:20:32.889Z,1513218032.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:32.916Z,1513218032.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:32.916Z,1513218032.916 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:20:32.921Z,1513218032.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:20:32.921Z,1513218032.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:20:32.925Z,1513218032.925 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:20:32.925Z,1513218032.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:20:32.926Z,1513218032.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:20:33.185Z,1513218033.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:33.272Z,1513218033.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:33.313Z,1513218033.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:33.589Z,1513218033.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:33.667Z,1513218033.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:33.722Z,1513218033.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:34.077Z,1513218034.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:34.107Z,1513218034.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:34.385Z,1513218034.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:34.517Z,1513218034.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:34.574Z,1513218034.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:34.910Z,1513218034.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:34.939Z,1513218034.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:35.181Z,1513218035.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:35.268Z,1513218035.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:35.299Z,1513218035.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:35.585Z,1513218035.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:35.671Z,1513218035.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:35.699Z,1513218035.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:36.067Z,1513218036.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:36.092Z,1513218036.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:36.382Z,1513218036.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:36.467Z,1513218036.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:36.499Z,1513218036.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:36.904Z,1513218036.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:36.950Z,1513218036.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:37.177Z,1513218037.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:37.306Z,1513218037.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:37.351Z,1513218037.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:37.581Z,1513218037.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:37.692Z,1513218037.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:37.738Z,1513218037.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:38.090Z,1513218038.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:38.127Z,1513218038.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:38.377Z,1513218038.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:38.472Z,1513218038.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:38.487Z,1513218038.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:38.917Z,1513218038.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:38.946Z,1513218038.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:39.173Z,1513218039.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:39.284Z,1513218039.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:39.315Z,1513218039.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:39.577Z,1513218039.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:39.671Z,1513218039.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:39.686Z,1513218039.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:40.083Z,1513218040.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:40.119Z,1513218040.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:40.373Z,1513218040.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:40.490Z,1513218040.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:40.524Z,1513218040.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:40.891Z,1513218040.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:40.944Z,1513218040.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:41.171Z,1513218041.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:41.290Z,1513218041.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:41.305Z,1513218041.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:41.597Z,1513218041.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:41.682Z,1513218041.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:41.703Z,1513218041.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:42.079Z,1513218042.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:42.099Z,1513218042.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:42.393Z,1513218042.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:42.476Z,1513218042.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:42.493Z,1513218042.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:42.875Z,1513218042.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:42.900Z,1513218042.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:43.197Z,1513218043.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:43.298Z,1513218043.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:43.372Z,1513218043.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:43.605Z,1513218043.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:43.685Z,1513218043.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:43.715Z,1513218043.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:44.401Z,1513218044.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:45.198Z,1513218045.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:45.601Z,1513218045.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:47.162Z,1513218047.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:47.212Z,1513218047.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:47.324Z,1513218047.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:47.369Z,1513218047.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:47.685Z,1513218047.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:47.730Z,1513218047.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:48.086Z,1513218048.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:48.100Z,1513218048.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:48.393Z,1513218048.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:48.488Z,1513218048.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:48.523Z,1513218048.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:48.904Z,1513218048.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:48.952Z,1513218048.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:49.189Z,1513218049.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:49.302Z,1513218049.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:49.333Z,1513218049.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:49.593Z,1513218049.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:49.694Z,1513218049.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:49.736Z,1513218049.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:50.089Z,1513218050.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:50.128Z,1513218050.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:50.389Z,1513218050.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:50.477Z,1513218050.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:50.492Z,1513218050.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:50.892Z,1513218050.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:50.943Z,1513218050.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:51.185Z,1513218051.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:51.275Z,1513218051.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:51.314Z,1513218051.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:51.589Z,1513218051.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:51.680Z,1513218051.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:51.707Z,1513218051.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:52.100Z,1513218052.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:52.119Z,1513218052.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:52.385Z,1513218052.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:52.498Z,1513218052.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:52.523Z,1513218052.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:52.939Z,1513218052.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:52.986Z,1513218052.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:53.181Z,1513218053.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:53.278Z,1513218053.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:53.304Z,1513218053.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:53.585Z,1513218053.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:53.717Z,1513218053.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:53.755Z,1513218053.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:54.084Z,1513218054.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:54.139Z,1513218054.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:54.381Z,1513218054.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:54.487Z,1513218054.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:54.502Z,1513218054.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:54.883Z,1513218054.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:54.899Z,1513218054.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:55.178Z,1513218055.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:55.290Z,1513218055.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:55.304Z,1513218055.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:55.693Z,1513218055.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:55.708Z,1513218055.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:55.973Z,1513218055.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:56.095Z,1513218056.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:56.119Z,1513218056.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:56.377Z,1513218056.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:56.479Z,1513218056.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:56.508Z,1513218056.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:56.898Z,1513218056.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:56.922Z,1513218056.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:57.175Z,1513218057.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:57.305Z,1513218057.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:57.327Z,1513218057.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:57.593Z,1513218057.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:57.677Z,1513218057.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:57.692Z,1513218057.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:58.093Z,1513218058.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:58.160Z,1513218058.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:58.389Z,1513218058.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:58.493Z,1513218058.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:58.528Z,1513218058.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:58.910Z,1513218058.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:58.961Z,1513218058.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:59.185Z,1513218059.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:59.280Z,1513218059.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:59.330Z,1513218059.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:20:59.589Z,1513218059.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:59.680Z,1513218059.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:20:59.695Z,1513218059.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:00.125Z,1513218060.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:00.176Z,1513218060.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:00.385Z,1513218060.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:00.484Z,1513218060.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:00.530Z,1513218060.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:00.895Z,1513218060.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:00.937Z,1513218060.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:01.181Z,1513218061.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:01.291Z,1513218061.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:01.306Z,1513218061.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:01.585Z,1513218061.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:01.689Z,1513218061.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:01.712Z,1513218061.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:02.092Z,1513218062.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:02.106Z,1513218062.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:02.381Z,1513218062.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:02.482Z,1513218062.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:02.497Z,1513218062.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:02.897Z,1513218062.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:02.938Z,1513218062.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:03.177Z,1513218063.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:03.284Z,1513218063.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:03.307Z,1513218063.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:03.581Z,1513218063.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:03.687Z,1513218063.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:03.703Z,1513218063.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:04.098Z,1513218064.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:04.120Z,1513218064.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:04.377Z,1513218064.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:04.497Z,1513218064.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:04.511Z,1513218064.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:04.909Z,1513218064.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:04.924Z,1513218064.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:05.173Z,1513218065.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:05.300Z,1513218065.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:05.315Z,1513218065.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:05.577Z,1513218065.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:05.680Z,1513218065.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:05.710Z,1513218065.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:06.075Z,1513218066.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:06.125Z,1513218066.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:06.373Z,1513218066.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:06.480Z,1513218066.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:06.506Z,1513218066.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:07.006Z,1513218067.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:07.024Z,1513218067.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:07.170Z,1513218067.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:07.295Z,1513218067.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:07.335Z,1513218067.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:07.573Z,1513218067.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:07.699Z,1513218067.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:07.731Z,1513218067.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:08.103Z,1513218068.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:08.118Z,1513218068.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:08.369Z,1513218068.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:08.475Z,1513218068.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:08.512Z,1513218068.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:08.879Z,1513218068.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:08.944Z,1513218068.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:09.167Z,1513218069.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:09.286Z,1513218069.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:09.301Z,1513218069.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:09.601Z,1513218069.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:09.686Z,1513218069.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:09.700Z,1513218069.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:10.097Z,1513218070.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:10.159Z,1513218070.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:10.397Z,1513218070.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:10.489Z,1513218070.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:10.504Z,1513218070.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:10.891Z,1513218070.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:10.906Z,1513218070.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:11.195Z,1513218071.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:11.288Z,1513218071.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:11.348Z,1513218071.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:11.605Z,1513218071.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:11.686Z,1513218071.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:11.700Z,1513218071.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:12.088Z,1513218072.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:12.139Z,1513218072.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:12.402Z,1513218072.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:12.490Z,1513218072.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:12.505Z,1513218072.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:12.907Z,1513218072.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:12.941Z,1513218072.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:13.197Z,1513218073.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:13.293Z,1513218073.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:13.332Z,1513218073.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:13.601Z,1513218073.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:13.697Z,1513218073.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:13.720Z,1513218073.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:14.098Z,1513218074.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:14.112Z,1513218074.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:14.397Z,1513218074.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:14.472Z,1513218074.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:14.511Z,1513218074.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:14.914Z,1513218074.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:14.969Z,1513218074.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:15.193Z,1513218075.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:15.277Z,1513218075.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:15.313Z,1513218075.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:15.597Z,1513218075.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:15.679Z,1513218075.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:15.711Z,1513218075.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:16.098Z,1513218076.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:16.113Z,1513218076.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:16.393Z,1513218076.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:16.540Z,1513218076.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:16.582Z,1513218076.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:16.904Z,1513218076.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:16.926Z,1513218076.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:17.189Z,1513218077.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:17.294Z,1513218077.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:17.347Z,1513218077.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:17.649Z,1513218077.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:17.680Z,1513218077.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:17.709Z,1513218077.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:18.079Z,1513218078.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:18.115Z,1513218078.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:18.469Z,1513218078.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:18.533Z,1513218078.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:18.564Z,1513218078.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:18.934Z,1513218078.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:18.975Z,1513218078.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:19.266Z,1513218079.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:19.292Z,1513218079.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:19.343Z,1513218079.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:19.669Z,1513218079.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:19.696Z,1513218079.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:19.731Z,1513218079.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:20.093Z,1513218080.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:20.135Z,1513218080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:20.466Z,1513218080.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:20.479Z,1513218080.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:20.531Z,1513218080.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:20.944Z,1513218080.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:20.996Z,1513218080.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:21.261Z,1513218081.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:21.296Z,1513218081.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:21.350Z,1513218081.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:21.667Z,1513218081.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:21.690Z,1513218081.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:21.741Z,1513218081.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:22.104Z,1513218082.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:22.147Z,1513218082.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:22.462Z,1513218082.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:22.505Z,1513218082.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:22.549Z,1513218082.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:22.897Z,1513218082.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:22.951Z,1513218082.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:23.257Z,1513218083.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:23.301Z,1513218083.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:23.357Z,1513218083.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:23.664Z,1513218083.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:23.675Z,1513218083.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:23.739Z,1513218083.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:24.088Z,1513218084.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:24.107Z,1513218084.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:24.457Z,1513218084.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:24.491Z,1513218084.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:24.546Z,1513218084.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:24.873Z,1513218084.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:24.941Z,1513218084.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:25.253Z,1513218085.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:25.304Z,1513218085.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:25.319Z,1513218085.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:25.657Z,1513218085.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:25.718Z,1513218085.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:25.757Z,1513218085.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:26.102Z,1513218086.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:26.161Z,1513218086.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:26.453Z,1513218086.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:26.479Z,1513218086.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:26.528Z,1513218086.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:26.920Z,1513218086.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:26.967Z,1513218086.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:27.249Z,1513218087.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:27.316Z,1513218087.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:27.341Z,1513218087.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:27.683Z,1513218087.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:27.732Z,1513218087.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:28.136Z,1513218088.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:28.168Z,1513218088.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:28.497Z,1513218088.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:28.570Z,1513218088.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:28.907Z,1513218088.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:28.950Z,1513218088.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x6401 got:0x12064
2017-12-14T02:21:28.982Z,1513218088.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:29.296Z,1513218089.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:29.345Z,1513218089.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:29.690Z,1513218089.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:29.734Z,1513218089.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:30.087Z,1513218090.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:30.111Z,1513218090.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:30.499Z,1513218090.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:30.547Z,1513218090.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:30.910Z,1513218090.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:30.943Z,1513218090.943 [BPC1](ERROR): Failed to parse message.
2017-12-14T02:21:30.943Z,1513218090.943 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:21:30.943Z,1513218090.943 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:21:30.943Z,1513218090.943 [BPC1](ERROR): Data Fault
2017-12-14T02:21:31.011Z,1513218091.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:31.046Z,1513218091.046 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:21:31.292Z,1513218091.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:31.379Z,1513218091.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:31.723Z,1513218091.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:31.763Z,1513218091.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:32.098Z,1513218092.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:32.164Z,1513218092.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:32.219Z,1513218092.219 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:21:32.220Z,1513218092.220 [BPC1] No Fault, FailCount= 1
2017-12-14T02:21:32.481Z,1513218092.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:32.599Z,1513218092.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:32.892Z,1513218092.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:32.948Z,1513218092.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:33.287Z,1513218093.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:33.375Z,1513218093.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:33.687Z,1513218093.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:33.711Z,1513218093.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:34.104Z,1513218094.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:34.156Z,1513218094.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:34.503Z,1513218094.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:34.525Z,1513218094.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:34.991Z,1513218094.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:35.036Z,1513218095.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:35.297Z,1513218095.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:35.347Z,1513218095.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:35.719Z,1513218095.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:35.751Z,1513218095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:36.081Z,1513218096.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:36.139Z,1513218096.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:36.484Z,1513218096.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:36.527Z,1513218096.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:36.886Z,1513218096.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:36.946Z,1513218096.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:37.316Z,1513218097.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:37.364Z,1513218097.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:37.717Z,1513218097.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:37.751Z,1513218097.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:38.094Z,1513218098.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:38.132Z,1513218098.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:38.487Z,1513218098.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:38.507Z,1513218098.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:38.891Z,1513218098.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:38.945Z,1513218098.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:39.286Z,1513218099.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:39.308Z,1513218099.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:39.686Z,1513218099.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:39.700Z,1513218099.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:40.098Z,1513218100.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:40.112Z,1513218100.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:40.497Z,1513218100.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:40.523Z,1513218100.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:40.922Z,1513218100.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:40.985Z,1513218100.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:41.279Z,1513218101.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:41.318Z,1513218101.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:41.686Z,1513218101.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:41.707Z,1513218101.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:42.082Z,1513218102.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:42.104Z,1513218102.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:42.489Z,1513218102.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:42.504Z,1513218102.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:42.894Z,1513218102.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:42.958Z,1513218102.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:43.293Z,1513218103.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:43.318Z,1513218103.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:43.693Z,1513218103.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:43.726Z,1513218103.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:44.094Z,1513218104.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:44.115Z,1513218104.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:47.658Z,1513218107.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:47.673Z,1513218107.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:47.784Z,1513218107.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:47.812Z,1513218107.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:48.153Z,1513218108.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:48.167Z,1513218108.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:48.550Z,1513218108.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:48.567Z,1513218108.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:48.953Z,1513218108.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:48.987Z,1513218108.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:49.330Z,1513218109.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:49.385Z,1513218109.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:49.739Z,1513218109.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:49.758Z,1513218109.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:50.134Z,1513218110.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:50.157Z,1513218110.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:50.542Z,1513218110.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:50.556Z,1513218110.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:50.924Z,1513218110.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:50.958Z,1513218110.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:51.356Z,1513218111.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:51.395Z,1513218111.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:51.747Z,1513218111.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:51.767Z,1513218111.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:52.146Z,1513218112.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:52.180Z,1513218112.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:52.523Z,1513218112.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:52.571Z,1513218112.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:52.944Z,1513218112.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:53.010Z,1513218113.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:53.327Z,1513218113.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:53.359Z,1513218113.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:53.734Z,1513218113.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:53.783Z,1513218113.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:54.134Z,1513218114.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:54.167Z,1513218114.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:54.542Z,1513218114.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:54.565Z,1513218114.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:54.950Z,1513218114.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:55.021Z,1513218115.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:55.342Z,1513218115.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:55.365Z,1513218115.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:55.742Z,1513218115.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:55.798Z,1513218115.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:56.134Z,1513218116.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:56.156Z,1513218116.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:56.543Z,1513218116.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:56.559Z,1513218116.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:56.939Z,1513218116.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:56.953Z,1513218116.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:57.345Z,1513218117.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:57.361Z,1513218117.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:57.746Z,1513218117.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:57.783Z,1513218117.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:58.148Z,1513218118.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:58.162Z,1513218118.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:58.542Z,1513218118.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:58.558Z,1513218118.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:58.954Z,1513218118.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:58.986Z,1513218118.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:59.350Z,1513218119.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:59.389Z,1513218119.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:21:59.735Z,1513218119.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:21:59.763Z,1513218119.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:00.146Z,1513218120.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:00.167Z,1513218120.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:00.553Z,1513218120.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:00.567Z,1513218120.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:00.954Z,1513218120.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:00.968Z,1513218120.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:01.331Z,1513218121.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:01.354Z,1513218121.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:01.743Z,1513218121.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:01.757Z,1513218121.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:02.148Z,1513218122.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:02.204Z,1513218122.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:02.547Z,1513218122.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:02.561Z,1513218122.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:02.966Z,1513218122.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:02.998Z,1513218122.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:03.351Z,1513218123.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:03.372Z,1513218123.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:03.749Z,1513218123.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:03.777Z,1513218123.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:04.153Z,1513218124.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:04.167Z,1513218124.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:04.530Z,1513218124.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:04.575Z,1513218124.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:04.926Z,1513218124.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:04.963Z,1513218124.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:05.328Z,1513218125.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:05.377Z,1513218125.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:05.723Z,1513218125.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:05.767Z,1513218125.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:06.140Z,1513218126.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:06.171Z,1513218126.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:06.558Z,1513218126.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:06.592Z,1513218126.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:06.960Z,1513218126.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:06.983Z,1513218126.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:07.332Z,1513218127.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:07.387Z,1513218127.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:07.736Z,1513218127.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:07.774Z,1513218127.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:08.131Z,1513218128.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:08.168Z,1513218128.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:08.587Z,1513218128.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:08.626Z,1513218128.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:08.930Z,1513218128.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:08.948Z,1513218128.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:09.361Z,1513218129.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:09.376Z,1513218129.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:09.759Z,1513218129.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:09.775Z,1513218129.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:10.146Z,1513218130.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:10.179Z,1513218130.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:10.532Z,1513218130.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:10.550Z,1513218130.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:10.936Z,1513218130.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:10.951Z,1513218130.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:11.336Z,1513218131.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:11.359Z,1513218131.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:11.760Z,1513218131.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:11.787Z,1513218131.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:12.146Z,1513218132.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:12.174Z,1513218132.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:12.550Z,1513218132.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:12.565Z,1513218132.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:12.947Z,1513218132.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:13.007Z,1513218133.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:13.327Z,1513218133.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:13.367Z,1513218133.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:13.724Z,1513218133.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:13.759Z,1513218133.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:14.130Z,1513218134.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:14.203Z,1513218134.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:14.533Z,1513218134.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:14.556Z,1513218134.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:14.927Z,1513218134.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:15.031Z,1513218135.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:15.346Z,1513218135.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:15.361Z,1513218135.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:15.755Z,1513218135.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:15.770Z,1513218135.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:16.142Z,1513218136.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:16.173Z,1513218136.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:16.527Z,1513218136.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:16.567Z,1513218136.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:16.946Z,1513218136.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:16.960Z,1513218136.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:17.326Z,1513218137.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:17.359Z,1513218137.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:17.726Z,1513218137.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:17.752Z,1513218137.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:18.218Z,1513218138.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:18.239Z,1513218138.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:18.541Z,1513218138.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:18.568Z,1513218138.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:18.940Z,1513218138.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:18.973Z,1513218138.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:19.334Z,1513218139.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:19.367Z,1513218139.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:19.735Z,1513218139.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:19.756Z,1513218139.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:20.139Z,1513218140.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:20.154Z,1513218140.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:20.542Z,1513218140.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:20.560Z,1513218140.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:20.940Z,1513218140.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:20.954Z,1513218140.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:21.341Z,1513218141.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:21.359Z,1513218141.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:21.753Z,1513218141.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:21.785Z,1513218141.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:22.148Z,1513218142.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:22.168Z,1513218142.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:22.519Z,1513218142.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:22.546Z,1513218142.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:22.932Z,1513218142.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:22.979Z,1513218142.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:23.332Z,1513218143.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:23.351Z,1513218143.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x25193 got:0x8192
2017-12-14T02:22:23.396Z,1513218143.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:23.762Z,1513218143.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:23.784Z,1513218143.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:24.146Z,1513218144.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:24.160Z,1513218144.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:24.559Z,1513218144.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:24.594Z,1513218144.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:24.949Z,1513218144.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:24.964Z,1513218144.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:25.326Z,1513218145.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:25.341Z,1513218145.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:25.728Z,1513218145.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:25.763Z,1513218145.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:26.113Z,1513218146.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:26.166Z,1513218146.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:26.531Z,1513218146.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:26.562Z,1513218146.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:26.927Z,1513218146.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:26.965Z,1513218146.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:27.337Z,1513218147.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:27.372Z,1513218147.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:27.785Z,1513218147.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:27.824Z,1513218147.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:28.142Z,1513218148.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:28.163Z,1513218148.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:28.528Z,1513218148.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:28.552Z,1513218148.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:28.936Z,1513218148.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:28.959Z,1513218148.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:29.331Z,1513218149.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:29.358Z,1513218149.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:29.740Z,1513218149.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:29.754Z,1513218149.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:30.140Z,1513218150.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:30.164Z,1513218150.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:30.545Z,1513218150.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:30.567Z,1513218150.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:30.966Z,1513218150.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:31.006Z,1513218151.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:31.349Z,1513218151.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:31.372Z,1513218151.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:31.741Z,1513218151.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:31.760Z,1513218151.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:32.137Z,1513218152.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:32.152Z,1513218152.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:32.541Z,1513218152.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:32.607Z,1513218152.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:32.944Z,1513218152.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:32.959Z,1513218152.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:33.348Z,1513218153.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:33.367Z,1513218153.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:33.749Z,1513218153.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:33.814Z,1513218153.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:34.164Z,1513218154.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:34.201Z,1513218154.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:34.520Z,1513218154.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:34.554Z,1513218154.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:34.927Z,1513218154.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:34.959Z,1513218154.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:35.342Z,1513218155.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:35.356Z,1513218155.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:35.728Z,1513218155.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:35.787Z,1513218155.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:36.149Z,1513218156.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:36.164Z,1513218156.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:36.545Z,1513218156.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:36.573Z,1513218156.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:36.931Z,1513218156.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:36.955Z,1513218156.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:37.319Z,1513218157.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:37.406Z,1513218157.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:37.738Z,1513218157.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:37.763Z,1513218157.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:38.126Z,1513218158.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:38.179Z,1513218158.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:38.533Z,1513218158.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:38.560Z,1513218158.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:38.923Z,1513218158.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:38.967Z,1513218158.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:39.357Z,1513218159.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:39.372Z,1513218159.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:39.746Z,1513218159.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:39.772Z,1513218159.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:40.133Z,1513218160.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:40.166Z,1513218160.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:40.540Z,1513218160.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:40.585Z,1513218160.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:40.938Z,1513218160.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:40.954Z,1513218160.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:41.346Z,1513218161.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:41.369Z,1513218161.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:41.727Z,1513218161.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:41.754Z,1513218161.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:42.151Z,1513218162.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:42.167Z,1513218162.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:42.552Z,1513218162.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:42.571Z,1513218162.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:42.948Z,1513218162.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:42.976Z,1513218162.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:42.988Z,1513218162.988 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:17:42.8Z
2017-12-14T02:22:42.988Z,1513218162.988 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:22:42.988Z,1513218162.988 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:22:43.340Z,1513218163.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:43.357Z,1513218163.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:44.205Z,1513218164.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:44.219Z,1513218164.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:44.348Z,1513218164.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:44.372Z,1513218164.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:47.813Z,1513218167.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:47.854Z,1513218167.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:47.934Z,1513218167.934 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171214T002839/Courier0044.lzma
2017-12-14T02:22:47.974Z,1513218167.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:48.007Z,1513218168.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:48.314Z,1513218168.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:48.328Z,1513218168.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:48.680Z,1513218168.680 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0044.lzma.bak
2017-12-14T02:22:48.685Z,1513218168.685 [DataOverHttps](INFO): SBD MOMSN=5437410
2017-12-14T02:22:48.720Z,1513218168.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:48.734Z,1513218168.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:49.972Z,1513218169.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:49.987Z,1513218169.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:50.116Z,1513218170.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:50.156Z,1513218170.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:53.641Z,1513218173.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:53.656Z,1513218173.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:53.776Z,1513218173.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:53.791Z,1513218173.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:54.149Z,1513218174.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:54.174Z,1513218174.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:54.540Z,1513218174.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:54.554Z,1513218174.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:54.939Z,1513218174.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:54.959Z,1513218174.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:55.354Z,1513218175.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:55.383Z,1513218175.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:58.389Z,1513218178.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:58.911Z,1513218178.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.036Z,1513218179.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:59.121Z,1513218179.121 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0045.lzma
2017-12-14T02:22:59.157Z,1513218179.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.184Z,1513218179.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:59.186Z,1513218179.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.548Z,1513218179.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.589Z,1513218179.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.603Z,1513218179.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:22:59.907Z,1513218179.907 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0045.lzma.bak
2017-12-14T02:22:59.907Z,1513218179.907 [DataOverHttps](INFO): SBD MOMSN=5437413
2017-12-14T02:22:59.955Z,1513218179.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:22:59.992Z,1513218179.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:00.388Z,1513218180.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:01.183Z,1513218181.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:01.589Z,1513218181.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:02.388Z,1513218182.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:03.183Z,1513218183.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:03.609Z,1513218183.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:20.508Z,1513218200.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:20.579Z,1513218200.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:20.582Z,1513218200.582 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:23:20.583Z,1513218200.583 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:23:20.583Z,1513218200.583 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:23:20.676Z,1513218200.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:20.695Z,1513218200.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:24.351Z,1513218204.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:24.399Z,1513218204.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:24.523Z,1513218204.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:24.548Z,1513218204.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:24.901Z,1513218204.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:24.958Z,1513218204.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:25.267Z,1513218205.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:25.303Z,1513218205.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:25.655Z,1513218205.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:25.683Z,1513218205.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:26.058Z,1513218206.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:26.074Z,1513218206.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:26.385Z,1513218206.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:26.456Z,1513218206.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:26.471Z,1513218206.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:26.848Z,1513218206.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:26.954Z,1513218206.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:27.181Z,1513218207.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:27.263Z,1513218207.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:27.286Z,1513218207.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:27.585Z,1513218207.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:27.674Z,1513218207.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:27.689Z,1513218207.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:28.071Z,1513218208.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:28.095Z,1513218208.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:28.381Z,1513218208.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:28.452Z,1513218208.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:28.485Z,1513218208.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:28.852Z,1513218208.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:28.866Z,1513218208.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:29.179Z,1513218209.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:29.252Z,1513218209.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:29.271Z,1513218209.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:29.654Z,1513218209.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:29.681Z,1513218209.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:29.973Z,1513218209.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:30.061Z,1513218210.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:30.076Z,1513218210.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:30.377Z,1513218210.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:30.466Z,1513218210.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:30.480Z,1513218210.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:30.865Z,1513218210.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:30.880Z,1513218210.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:31.279Z,1513218211.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:31.343Z,1513218211.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:31.647Z,1513218211.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:31.678Z,1513218211.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:32.067Z,1513218212.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:32.081Z,1513218212.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:32.471Z,1513218212.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:32.526Z,1513218212.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:32.526Z,1513218212.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2017-12-14T02:23:32.526Z,1513218212.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:23:32.541Z,1513218212.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:23:32.904Z,1513218212.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:32.938Z,1513218212.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:32.938Z,1513218212.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2017-12-14T02:23:32.938Z,1513218212.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:23:32.940Z,1513218212.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:32.940Z,1513218212.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2017-12-14T02:23:32.940Z,1513218212.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:23:32.954Z,1513218212.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:23:32.954Z,1513218212.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2017-12-14T02:23:32.954Z,1513218212.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:23:32.954Z,1513218212.954 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:23:33.258Z,1513218213.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:33.298Z,1513218213.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:23:33.298Z,1513218213.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:23:33.299Z,1513218213.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:23:33.310Z,1513218213.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:23:33.310Z,1513218213.310 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2017-12-14T02:23:33.311Z,1513218213.311 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:23:33.311Z,1513218213.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2017-12-14T02:23:33.654Z,1513218213.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:33.682Z,1513218213.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:33.682Z,1513218213.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:23:33.683Z,1513218213.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:23:33.683Z,1513218213.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:23:33.684Z,1513218213.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:23:33.684Z,1513218213.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:23:33.684Z,1513218213.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:23:34.055Z,1513218214.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:34.088Z,1513218214.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:34.463Z,1513218214.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:34.494Z,1513218214.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:34.895Z,1513218214.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:34.938Z,1513218214.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:35.271Z,1513218215.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:35.286Z,1513218215.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:35.670Z,1513218215.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:35.684Z,1513218215.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:36.069Z,1513218216.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:36.083Z,1513218216.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:36.445Z,1513218216.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:36.481Z,1513218216.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:36.889Z,1513218216.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:36.936Z,1513218216.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:37.259Z,1513218217.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:37.274Z,1513218217.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:37.669Z,1513218217.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:37.719Z,1513218217.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:38.057Z,1513218218.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:38.072Z,1513218218.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:38.461Z,1513218218.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:38.475Z,1513218218.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:38.908Z,1513218218.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:38.951Z,1513218218.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:39.260Z,1513218219.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:39.302Z,1513218219.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:39.658Z,1513218219.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:39.672Z,1513218219.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:40.058Z,1513218220.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:40.074Z,1513218220.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:40.454Z,1513218220.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:40.483Z,1513218220.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:40.922Z,1513218220.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:40.970Z,1513218220.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:41.270Z,1513218221.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:41.308Z,1513218221.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:41.669Z,1513218221.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:41.684Z,1513218221.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:42.070Z,1513218222.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:42.091Z,1513218222.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:42.459Z,1513218222.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:42.476Z,1513218222.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:42.851Z,1513218222.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:42.872Z,1513218222.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:43.250Z,1513218223.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:43.337Z,1513218223.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:43.648Z,1513218223.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:43.679Z,1513218223.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:44.075Z,1513218224.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:44.090Z,1513218224.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:44.472Z,1513218224.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:44.491Z,1513218224.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:44.858Z,1513218224.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:44.954Z,1513218224.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:45.257Z,1513218225.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:45.280Z,1513218225.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:45.659Z,1513218225.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:45.673Z,1513218225.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:46.066Z,1513218226.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:46.115Z,1513218226.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:46.471Z,1513218226.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:46.486Z,1513218226.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:46.903Z,1513218226.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:46.963Z,1513218226.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:47.274Z,1513218227.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:47.314Z,1513218227.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:47.670Z,1513218227.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:47.710Z,1513218227.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:48.063Z,1513218228.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:48.077Z,1513218228.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:48.462Z,1513218228.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:48.481Z,1513218228.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:48.887Z,1513218228.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:48.937Z,1513218228.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:49.277Z,1513218229.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:49.308Z,1513218229.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:49.674Z,1513218229.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:49.688Z,1513218229.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:50.071Z,1513218230.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:50.086Z,1513218230.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:50.479Z,1513218230.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:50.530Z,1513218230.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:50.894Z,1513218230.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:50.933Z,1513218230.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:51.260Z,1513218231.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:51.292Z,1513218231.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:51.659Z,1513218231.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:51.673Z,1513218231.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:52.066Z,1513218232.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:52.095Z,1513218232.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:52.470Z,1513218232.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:52.496Z,1513218232.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:52.911Z,1513218232.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:52.952Z,1513218232.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:53.259Z,1513218233.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:53.300Z,1513218233.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:53.724Z,1513218233.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:53.767Z,1513218233.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:54.058Z,1513218234.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:54.083Z,1513218234.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:54.460Z,1513218234.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:54.484Z,1513218234.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:54.869Z,1513218234.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:54.965Z,1513218234.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:55.276Z,1513218235.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:55.336Z,1513218235.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:55.668Z,1513218235.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:55.684Z,1513218235.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:56.066Z,1513218236.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:56.081Z,1513218236.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:56.452Z,1513218236.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:56.479Z,1513218236.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:56.873Z,1513218236.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:56.927Z,1513218236.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:57.248Z,1513218237.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:57.291Z,1513218237.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:57.668Z,1513218237.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:57.695Z,1513218237.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:58.065Z,1513218238.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:58.095Z,1513218238.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:58.465Z,1513218238.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:58.495Z,1513218238.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:58.866Z,1513218238.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:58.896Z,1513218238.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:59.258Z,1513218239.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:59.290Z,1513218239.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:23:59.654Z,1513218239.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:23:59.669Z,1513218239.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:00.086Z,1513218240.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:00.122Z,1513218240.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:00.448Z,1513218240.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:00.499Z,1513218240.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:00.882Z,1513218240.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:00.936Z,1513218240.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:01.272Z,1513218241.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:01.287Z,1513218241.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:01.672Z,1513218241.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:01.686Z,1513218241.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:02.089Z,1513218242.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:02.104Z,1513218242.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:02.451Z,1513218242.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:02.476Z,1513218242.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:02.892Z,1513218242.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:02.968Z,1513218242.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:03.277Z,1513218243.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:03.304Z,1513218243.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:03.654Z,1513218243.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:03.685Z,1513218243.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:04.058Z,1513218244.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:04.074Z,1513218244.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:04.460Z,1513218244.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:04.480Z,1513218244.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:04.917Z,1513218244.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:05.002Z,1513218245.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:05.259Z,1513218245.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:05.302Z,1513218245.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:05.655Z,1513218245.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:05.674Z,1513218245.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:06.055Z,1513218246.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:06.075Z,1513218246.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:06.495Z,1513218246.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:06.527Z,1513218246.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:06.894Z,1513218246.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:06.924Z,1513218246.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:07.266Z,1513218247.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:07.335Z,1513218247.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:07.666Z,1513218247.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:07.680Z,1513218247.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:08.065Z,1513218248.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:08.087Z,1513218248.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:08.453Z,1513218248.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:08.555Z,1513218248.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:08.883Z,1513218248.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:08.954Z,1513218248.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:09.251Z,1513218249.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:09.303Z,1513218249.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:09.687Z,1513218249.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:09.739Z,1513218249.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:10.070Z,1513218250.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:10.090Z,1513218250.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:10.457Z,1513218250.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:10.483Z,1513218250.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:10.874Z,1513218250.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:10.889Z,1513218250.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:11.253Z,1513218251.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:11.359Z,1513218251.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:11.654Z,1513218251.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:11.669Z,1513218251.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:12.055Z,1513218252.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:12.069Z,1513218252.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:12.377Z,1513218252.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:12.457Z,1513218252.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:12.471Z,1513218252.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:12.902Z,1513218252.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:12.962Z,1513218252.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:13.175Z,1513218253.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:13.270Z,1513218253.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:13.303Z,1513218253.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:13.601Z,1513218253.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:13.669Z,1513218253.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:13.696Z,1513218253.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:14.061Z,1513218254.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:14.125Z,1513218254.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:14.398Z,1513218254.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:14.463Z,1513218254.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:14.478Z,1513218254.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:14.890Z,1513218254.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:14.920Z,1513218254.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:15.193Z,1513218255.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:15.248Z,1513218255.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:15.283Z,1513218255.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:15.597Z,1513218255.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:15.648Z,1513218255.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:15.684Z,1513218255.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:16.083Z,1513218256.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:16.141Z,1513218256.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:16.469Z,1513218256.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:16.491Z,1513218256.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:16.895Z,1513218256.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:16.934Z,1513218256.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:17.247Z,1513218257.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:17.279Z,1513218257.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:17.647Z,1513218257.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:17.695Z,1513218257.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:18.047Z,1513218258.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:18.078Z,1513218258.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:18.452Z,1513218258.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:18.477Z,1513218258.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:18.881Z,1513218258.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:18.908Z,1513218258.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:19.280Z,1513218259.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:19.300Z,1513218259.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:19.718Z,1513218259.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:19.753Z,1513218259.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:20.070Z,1513218260.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:20.099Z,1513218260.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:20.458Z,1513218260.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:20.473Z,1513218260.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:20.880Z,1513218260.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:20.920Z,1513218260.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:21.248Z,1513218261.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:21.283Z,1513218261.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:25.030Z,1513218265.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:25.045Z,1513218265.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:25.191Z,1513218265.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:25.254Z,1513218265.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:25.542Z,1513218265.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:25.557Z,1513218265.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:25.958Z,1513218265.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:25.983Z,1513218265.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:26.335Z,1513218266.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:26.351Z,1513218266.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:26.418Z,1513218266.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:26.727Z,1513218266.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:26.755Z,1513218266.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:27.158Z,1513218267.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:27.214Z,1513218267.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:27.249Z,1513218267.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:27.534Z,1513218267.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:27.549Z,1513218267.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:27.617Z,1513218267.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:27.937Z,1513218267.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:27.953Z,1513218267.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:28.346Z,1513218268.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:28.361Z,1513218268.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:28.741Z,1513218268.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:28.787Z,1513218268.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:29.141Z,1513218269.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:29.165Z,1513218269.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:29.529Z,1513218269.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:29.584Z,1513218269.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:29.924Z,1513218269.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:29.979Z,1513218269.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:30.334Z,1513218270.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:30.350Z,1513218270.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:30.733Z,1513218270.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:30.776Z,1513218270.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:31.142Z,1513218271.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:31.157Z,1513218271.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:31.544Z,1513218271.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:31.595Z,1513218271.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:31.949Z,1513218271.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:31.964Z,1513218271.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:32.326Z,1513218272.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:32.355Z,1513218272.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:32.731Z,1513218272.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:32.758Z,1513218272.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:33.130Z,1513218273.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:33.158Z,1513218273.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:33.530Z,1513218273.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:33.563Z,1513218273.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:33.936Z,1513218273.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:33.951Z,1513218273.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:34.346Z,1513218274.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:34.361Z,1513218274.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:34.743Z,1513218274.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:34.763Z,1513218274.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:35.159Z,1513218275.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:35.187Z,1513218275.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:35.533Z,1513218275.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:35.547Z,1513218275.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:35.926Z,1513218275.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:35.941Z,1513218275.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:36.334Z,1513218276.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:36.349Z,1513218276.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:36.730Z,1513218276.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:36.782Z,1513218276.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:37.141Z,1513218277.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:37.156Z,1513218277.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:37.541Z,1513218277.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:37.557Z,1513218277.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:37.942Z,1513218277.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:37.957Z,1513218277.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:38.324Z,1513218278.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:38.386Z,1513218278.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:38.723Z,1513218278.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:38.748Z,1513218278.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:39.180Z,1513218279.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:39.238Z,1513218279.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:39.533Z,1513218279.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:39.548Z,1513218279.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:39.931Z,1513218279.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:39.979Z,1513218279.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:40.346Z,1513218280.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:40.376Z,1513218280.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:40.406Z,1513218280.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:40.746Z,1513218280.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:40.770Z,1513218280.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:41.166Z,1513218281.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:41.202Z,1513218281.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:41.238Z,1513218281.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:41.569Z,1513218281.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:41.621Z,1513218281.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:41.636Z,1513218281.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:41.931Z,1513218281.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:41.946Z,1513218281.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:42.336Z,1513218282.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:42.351Z,1513218282.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:42.418Z,1513218282.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:42.732Z,1513218282.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:42.748Z,1513218282.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:43.133Z,1513218283.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:43.167Z,1513218283.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:43.214Z,1513218283.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:43.554Z,1513218283.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:43.568Z,1513218283.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:43.617Z,1513218283.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:43.942Z,1513218283.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:43.966Z,1513218283.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:44.325Z,1513218284.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:44.340Z,1513218284.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:44.747Z,1513218284.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:44.835Z,1513218284.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:45.123Z,1513218285.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:45.157Z,1513218285.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:45.524Z,1513218285.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:45.559Z,1513218285.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:45.927Z,1513218285.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:45.960Z,1513218285.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:46.342Z,1513218286.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:46.374Z,1513218286.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:46.733Z,1513218286.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:46.770Z,1513218286.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:47.134Z,1513218287.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:47.149Z,1513218287.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:47.531Z,1513218287.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:47.548Z,1513218287.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:47.933Z,1513218287.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:47.949Z,1513218287.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:48.329Z,1513218288.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:48.351Z,1513218288.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:48.732Z,1513218288.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:48.748Z,1513218288.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:49.149Z,1513218289.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:49.165Z,1513218289.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:49.546Z,1513218289.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:49.561Z,1513218289.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:49.948Z,1513218289.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:49.967Z,1513218289.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:50.336Z,1513218290.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:50.352Z,1513218290.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:50.733Z,1513218290.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:50.756Z,1513218290.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:51.200Z,1513218291.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:51.223Z,1513218291.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:51.532Z,1513218291.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:51.564Z,1513218291.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:51.925Z,1513218291.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:52.002Z,1513218292.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:52.352Z,1513218292.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:52.388Z,1513218292.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:52.746Z,1513218292.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:52.767Z,1513218292.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:53.175Z,1513218293.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:53.240Z,1513218293.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:53.528Z,1513218293.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:53.577Z,1513218293.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:53.929Z,1513218293.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:53.952Z,1513218293.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:54.350Z,1513218294.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:54.414Z,1513218294.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:54.427Z,1513218294.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:54.734Z,1513218294.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:54.750Z,1513218294.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:55.164Z,1513218295.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:55.210Z,1513218295.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:55.224Z,1513218295.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:55.547Z,1513218295.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:55.567Z,1513218295.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:55.613Z,1513218295.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:55.946Z,1513218295.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:55.962Z,1513218295.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:56.329Z,1513218296.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:56.353Z,1513218296.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:56.733Z,1513218296.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:56.749Z,1513218296.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:57.128Z,1513218297.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:57.157Z,1513218297.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:57.526Z,1513218297.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:57.591Z,1513218297.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:57.934Z,1513218297.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:57.950Z,1513218297.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:58.346Z,1513218298.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:58.378Z,1513218298.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:58.734Z,1513218298.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:58.750Z,1513218298.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:59.143Z,1513218299.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:59.167Z,1513218299.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:59.524Z,1513218299.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:59.554Z,1513218299.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:24:59.920Z,1513218299.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:24:59.949Z,1513218299.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:00.323Z,1513218300.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:00.360Z,1513218300.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:00.765Z,1513218300.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:00.785Z,1513218300.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:01.143Z,1513218301.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:01.163Z,1513218301.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:01.543Z,1513218301.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:01.571Z,1513218301.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:01.938Z,1513218301.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:01.953Z,1513218301.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:02.319Z,1513218302.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:02.342Z,1513218302.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:02.723Z,1513218302.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:02.764Z,1513218302.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:03.123Z,1513218303.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:03.159Z,1513218303.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:03.530Z,1513218303.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:03.546Z,1513218303.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:03.933Z,1513218303.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:03.948Z,1513218303.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:04.337Z,1513218304.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:04.359Z,1513218304.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:04.734Z,1513218304.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:04.749Z,1513218304.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:05.133Z,1513218305.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:05.151Z,1513218305.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:05.537Z,1513218305.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:05.552Z,1513218305.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:05.924Z,1513218305.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:05.951Z,1513218305.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:06.336Z,1513218306.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:06.351Z,1513218306.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:06.735Z,1513218306.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:06.751Z,1513218306.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:07.196Z,1513218307.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:07.246Z,1513218307.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:07.541Z,1513218307.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:07.559Z,1513218307.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:07.965Z,1513218307.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:07.988Z,1513218307.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:08.322Z,1513218308.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:08.354Z,1513218308.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:08.730Z,1513218308.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:08.751Z,1513218308.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:09.131Z,1513218309.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:09.211Z,1513218309.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:09.524Z,1513218309.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:09.550Z,1513218309.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:09.923Z,1513218309.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:09.947Z,1513218309.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:10.344Z,1513218310.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:10.370Z,1513218310.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:10.749Z,1513218310.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:10.767Z,1513218310.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:11.146Z,1513218311.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:11.179Z,1513218311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:11.531Z,1513218311.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:11.547Z,1513218311.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:11.928Z,1513218311.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:11.943Z,1513218311.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:12.332Z,1513218312.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:12.346Z,1513218312.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:12.728Z,1513218312.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:12.750Z,1513218312.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:13.155Z,1513218313.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:13.175Z,1513218313.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:13.556Z,1513218313.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:13.579Z,1513218313.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:13.947Z,1513218313.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:13.964Z,1513218313.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:14.327Z,1513218314.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:14.353Z,1513218314.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:14.723Z,1513218314.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:14.832Z,1513218314.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:15.141Z,1513218315.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:15.156Z,1513218315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:15.536Z,1513218315.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:15.583Z,1513218315.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:15.947Z,1513218315.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:15.983Z,1513218315.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:16.341Z,1513218316.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:16.399Z,1513218316.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:16.750Z,1513218316.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:16.841Z,1513218316.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:17.141Z,1513218317.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:17.163Z,1513218317.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:17.530Z,1513218317.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:17.561Z,1513218317.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:17.935Z,1513218317.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:17.951Z,1513218317.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:18.331Z,1513218318.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:18.351Z,1513218318.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:18.736Z,1513218318.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:18.751Z,1513218318.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:19.143Z,1513218319.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:19.163Z,1513218319.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:19.547Z,1513218319.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:19.563Z,1513218319.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:19.947Z,1513218319.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:19.963Z,1513218319.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:20.323Z,1513218320.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:20.355Z,1513218320.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:20.723Z,1513218320.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:20.755Z,1513218320.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:21.123Z,1513218321.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:21.209Z,1513218321.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:21.538Z,1513218321.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:21.559Z,1513218321.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:25.042Z,1513218325.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:25.090Z,1513218325.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:25.204Z,1513218325.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:25.242Z,1513218325.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:25.550Z,1513218325.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:25.566Z,1513218325.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:25.962Z,1513218325.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:25.994Z,1513218325.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:26.342Z,1513218326.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:26.363Z,1513218326.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:26.744Z,1513218326.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:26.763Z,1513218326.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:27.135Z,1513218327.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:27.163Z,1513218327.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:27.540Z,1513218327.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:27.571Z,1513218327.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:27.941Z,1513218327.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:27.956Z,1513218327.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:28.350Z,1513218328.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:28.375Z,1513218328.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:28.754Z,1513218328.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:28.779Z,1513218328.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:29.146Z,1513218329.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:29.183Z,1513218329.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:29.572Z,1513218329.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:29.599Z,1513218329.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:29.940Z,1513218329.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:29.956Z,1513218329.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:30.348Z,1513218330.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:30.362Z,1513218330.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:30.901Z,1513218330.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:30.961Z,1513218330.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:31.154Z,1513218331.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:31.187Z,1513218331.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:31.562Z,1513218331.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:31.584Z,1513218331.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:31.954Z,1513218331.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:31.986Z,1513218331.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:32.344Z,1513218332.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:32.386Z,1513218332.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:32.780Z,1513218332.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:32.815Z,1513218332.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:33.135Z,1513218333.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:33.166Z,1513218333.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:33.540Z,1513218333.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:33.578Z,1513218333.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:33.940Z,1513218333.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:33.969Z,1513218333.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:34.363Z,1513218334.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:34.378Z,1513218334.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:34.754Z,1513218334.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:34.776Z,1513218334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:35.169Z,1513218335.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:35.234Z,1513218335.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:35.542Z,1513218335.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:35.578Z,1513218335.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:36.096Z,1513218336.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:36.169Z,1513218336.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:36.354Z,1513218336.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:36.392Z,1513218336.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:36.742Z,1513218336.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:36.766Z,1513218336.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:37.190Z,1513218337.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:37.299Z,1513218337.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:37.555Z,1513218337.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:37.588Z,1513218337.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:37.954Z,1513218337.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:38.017Z,1513218338.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:38.348Z,1513218338.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:38.383Z,1513218338.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:38.735Z,1513218338.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:38.783Z,1513218338.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:39.144Z,1513218339.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:39.160Z,1513218339.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:39.540Z,1513218339.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:39.563Z,1513218339.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:39.948Z,1513218339.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:39.963Z,1513218339.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:40.351Z,1513218340.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:40.366Z,1513218340.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:40.754Z,1513218340.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:40.770Z,1513218340.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:41.155Z,1513218341.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:41.171Z,1513218341.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:41.549Z,1513218341.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:41.563Z,1513218341.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:41.950Z,1513218341.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:41.966Z,1513218341.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:42.343Z,1513218342.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:42.363Z,1513218342.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:42.732Z,1513218342.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:42.759Z,1513218342.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:43.168Z,1513218343.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:43.237Z,1513218343.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:43.561Z,1513218343.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:43.575Z,1513218343.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:43.959Z,1513218343.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:43.982Z,1513218343.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:44.339Z,1513218344.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:44.371Z,1513218344.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:44.735Z,1513218344.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:44.769Z,1513218344.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:45.144Z,1513218345.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:45.159Z,1513218345.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:45.540Z,1513218345.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:45.569Z,1513218345.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:45.950Z,1513218345.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:45.964Z,1513218345.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:46.353Z,1513218346.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:46.404Z,1513218346.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:46.751Z,1513218346.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:46.767Z,1513218346.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:47.152Z,1513218347.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:47.204Z,1513218347.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:47.546Z,1513218347.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:47.561Z,1513218347.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:47.953Z,1513218347.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:47.968Z,1513218347.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:48.343Z,1513218348.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:48.360Z,1513218348.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:48.750Z,1513218348.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:48.772Z,1513218348.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:49.203Z,1513218349.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:49.226Z,1513218349.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:49.560Z,1513218349.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:49.591Z,1513218349.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:49.949Z,1513218349.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:49.964Z,1513218349.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:50.343Z,1513218350.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:50.358Z,1513218350.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:50.741Z,1513218350.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:50.763Z,1513218350.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:51.157Z,1513218351.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:51.239Z,1513218351.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:51.542Z,1513218351.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:51.567Z,1513218351.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:51.948Z,1513218351.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:51.967Z,1513218351.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:52.354Z,1513218352.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:52.369Z,1513218352.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:52.754Z,1513218352.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:52.872Z,1513218352.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:53.156Z,1513218353.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:53.171Z,1513218353.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:53.535Z,1513218353.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:53.568Z,1513218353.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:53.940Z,1513218353.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:53.967Z,1513218353.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:54.357Z,1513218354.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:54.372Z,1513218354.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:54.743Z,1513218354.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:54.771Z,1513218354.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:55.154Z,1513218355.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:55.178Z,1513218355.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:55.555Z,1513218355.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:55.583Z,1513218355.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:55.958Z,1513218355.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:55.991Z,1513218355.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:56.344Z,1513218356.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:56.367Z,1513218356.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:56.744Z,1513218356.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:56.767Z,1513218356.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:57.140Z,1513218357.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:57.169Z,1513218357.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:57.536Z,1513218357.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:57.573Z,1513218357.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:57.939Z,1513218357.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:57.966Z,1513218357.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:58.359Z,1513218358.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:58.375Z,1513218358.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:58.750Z,1513218358.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:58.778Z,1513218358.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:59.176Z,1513218359.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:59.267Z,1513218359.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:59.535Z,1513218359.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:59.577Z,1513218359.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:25:59.936Z,1513218359.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:25:59.966Z,1513218359.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:00.336Z,1513218360.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:00.387Z,1513218360.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:00.739Z,1513218360.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:00.765Z,1513218360.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:01.159Z,1513218361.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:01.222Z,1513218361.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:01.563Z,1513218361.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:01.583Z,1513218361.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:01.964Z,1513218361.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:01.978Z,1513218361.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:02.340Z,1513218362.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:02.371Z,1513218362.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:02.735Z,1513218362.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:02.770Z,1513218362.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:03.196Z,1513218363.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:03.228Z,1513218363.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:03.544Z,1513218363.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:03.560Z,1513218363.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:04.054Z,1513218364.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:04.138Z,1513218364.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:04.342Z,1513218364.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:04.357Z,1513218364.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:04.754Z,1513218364.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:04.781Z,1513218364.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:05.210Z,1513218365.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:05.254Z,1513218365.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:05.570Z,1513218365.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:05.599Z,1513218365.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:05.945Z,1513218365.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:05.960Z,1513218365.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:06.354Z,1513218366.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:06.368Z,1513218366.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:06.736Z,1513218366.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:06.769Z,1513218366.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:07.171Z,1513218367.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:07.191Z,1513218367.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:07.564Z,1513218367.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:07.587Z,1513218367.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:07.950Z,1513218367.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:07.980Z,1513218367.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:08.344Z,1513218368.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:08.363Z,1513218368.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:08.778Z,1513218368.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:08.859Z,1513218368.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:09.135Z,1513218369.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:09.151Z,1513218369.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:09.548Z,1513218369.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:09.617Z,1513218369.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:09.947Z,1513218369.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:09.979Z,1513218369.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:10.362Z,1513218370.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:10.391Z,1513218370.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:10.764Z,1513218370.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:10.787Z,1513218370.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:11.149Z,1513218371.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:11.164Z,1513218371.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:11.547Z,1513218371.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:11.562Z,1513218371.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:11.943Z,1513218371.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:11.967Z,1513218371.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:12.346Z,1513218372.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:12.361Z,1513218372.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:12.736Z,1513218372.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:12.765Z,1513218372.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:13.157Z,1513218373.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:13.173Z,1513218373.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:13.562Z,1513218373.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:13.583Z,1513218373.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:13.943Z,1513218373.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:13.987Z,1513218373.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:14.338Z,1513218374.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:14.369Z,1513218374.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:14.735Z,1513218374.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:14.770Z,1513218374.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:15.135Z,1513218375.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:15.171Z,1513218375.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:15.536Z,1513218375.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:15.571Z,1513218375.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:15.937Z,1513218375.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:15.975Z,1513218375.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:16.386Z,1513218376.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:16.419Z,1513218376.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:16.770Z,1513218376.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:16.792Z,1513218376.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:17.194Z,1513218377.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:17.248Z,1513218377.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:17.543Z,1513218377.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:17.559Z,1513218377.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:17.941Z,1513218377.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:17.963Z,1513218377.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:18.346Z,1513218378.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:18.360Z,1513218378.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:18.744Z,1513218378.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:18.767Z,1513218378.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:19.163Z,1513218379.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:19.247Z,1513218379.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:19.555Z,1513218379.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:19.571Z,1513218379.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:19.954Z,1513218379.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:19.971Z,1513218379.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:20.345Z,1513218380.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:20.361Z,1513218380.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:20.747Z,1513218380.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:20.767Z,1513218380.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:21.153Z,1513218381.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:21.196Z,1513218381.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:21.622Z,1513218381.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:21.740Z,1513218381.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:29.090Z,1513218389.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:29.099Z,1513218389.099 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:26:29.099Z,1513218389.099 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:26:29.099Z,1513218389.099 [BPC1](ERROR): Communications Fault
2017-12-14T02:26:29.107Z,1513218389.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:29.120Z,1513218389.120 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:26:29.251Z,1513218389.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:29.283Z,1513218389.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:29.600Z,1513218389.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:29.616Z,1513218389.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:29.980Z,1513218389.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:30.004Z,1513218390.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:30.017Z,1513218390.017 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:26:30.017Z,1513218390.017 [BPC1] No Fault, FailCount= 1
2017-12-14T02:26:30.366Z,1513218390.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:30.467Z,1513218390.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:30.778Z,1513218390.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:30.811Z,1513218390.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:31.243Z,1513218391.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:31.280Z,1513218391.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:31.608Z,1513218391.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:31.650Z,1513218391.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:31.988Z,1513218391.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:32.003Z,1513218392.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:32.384Z,1513218392.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:32.408Z,1513218392.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:32.770Z,1513218392.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:32.792Z,1513218392.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:33.233Z,1513218393.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:33.281Z,1513218393.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:33.560Z,1513218393.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:33.731Z,1513218393.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:33.731Z,1513218393.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2017-12-14T02:26:33.731Z,1513218393.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:26:33.733Z,1513218393.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:33.733Z,1513218393.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2017-12-14T02:26:33.733Z,1513218393.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:26:33.778Z,1513218393.778 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:33.778Z,1513218393.778 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2017-12-14T02:26:33.778Z,1513218393.778 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:26:33.827Z,1513218393.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:26:33.827Z,1513218393.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:26:33.827Z,1513218393.827 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:26:33.971Z,1513218393.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:34.075Z,1513218394.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:26:34.075Z,1513218394.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2017-12-14T02:26:34.075Z,1513218394.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:26:34.075Z,1513218394.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2017-12-14T02:26:34.076Z,1513218394.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:26:34.076Z,1513218394.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2017-12-14T02:26:34.371Z,1513218394.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:34.397Z,1513218394.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:26:34.398Z,1513218394.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:26:34.398Z,1513218394.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:26:34.399Z,1513218394.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:26:34.399Z,1513218394.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:26:34.399Z,1513218394.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:26:34.400Z,1513218394.400 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:26:34.400Z,1513218394.400 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:26:34.400Z,1513218394.400 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:26:34.788Z,1513218394.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:34.890Z,1513218394.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:35.165Z,1513218395.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:35.217Z,1513218395.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:35.559Z,1513218395.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:35.591Z,1513218395.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:35.957Z,1513218395.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:36.014Z,1513218396.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:36.380Z,1513218396.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:36.403Z,1513218396.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:36.771Z,1513218396.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:36.863Z,1513218396.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:37.170Z,1513218397.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:37.203Z,1513218397.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:37.562Z,1513218397.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:37.598Z,1513218397.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:37.992Z,1513218397.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:38.060Z,1513218398.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:38.360Z,1513218398.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:38.410Z,1513218398.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:38.758Z,1513218398.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:38.890Z,1513218398.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:39.168Z,1513218399.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:39.222Z,1513218399.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:39.575Z,1513218399.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:39.607Z,1513218399.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:39.991Z,1513218399.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:40.014Z,1513218400.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:40.383Z,1513218400.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:40.465Z,1513218400.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:40.762Z,1513218400.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:40.891Z,1513218400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:41.188Z,1513218401.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:41.219Z,1513218401.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:41.564Z,1513218401.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:41.579Z,1513218401.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:41.965Z,1513218401.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:41.987Z,1513218401.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:42.378Z,1513218402.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:42.399Z,1513218402.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:42.783Z,1513218402.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:42.803Z,1513218402.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:43.173Z,1513218403.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:43.208Z,1513218403.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:43.565Z,1513218403.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:43.581Z,1513218403.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:43.962Z,1513218403.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:43.977Z,1513218403.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:44.366Z,1513218404.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:44.381Z,1513218404.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:44.778Z,1513218404.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:44.818Z,1513218404.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:45.213Z,1513218405.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:45.243Z,1513218405.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:45.574Z,1513218405.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:45.606Z,1513218405.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:45.978Z,1513218405.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:46.005Z,1513218406.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:46.364Z,1513218406.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:46.379Z,1513218406.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:46.766Z,1513218406.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:46.780Z,1513218406.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:47.216Z,1513218407.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:47.310Z,1513218407.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:47.559Z,1513218407.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:47.593Z,1513218407.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:47.983Z,1513218407.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:48.012Z,1513218408.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:48.402Z,1513218408.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:48.420Z,1513218408.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:48.770Z,1513218408.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:48.824Z,1513218408.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:49.167Z,1513218409.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:49.182Z,1513218409.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:49.562Z,1513218409.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:49.591Z,1513218409.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:49.965Z,1513218409.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:49.980Z,1513218409.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:50.369Z,1513218410.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:50.431Z,1513218410.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:50.770Z,1513218410.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:50.924Z,1513218410.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:51.169Z,1513218411.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:51.184Z,1513218411.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:51.567Z,1513218411.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:51.592Z,1513218411.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:51.966Z,1513218411.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:52.017Z,1513218412.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:52.363Z,1513218412.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:52.390Z,1513218412.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:52.767Z,1513218412.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:52.879Z,1513218412.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:53.188Z,1513218413.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:53.207Z,1513218413.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:53.584Z,1513218413.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:53.598Z,1513218413.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:53.989Z,1513218413.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:54.004Z,1513218414.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:54.387Z,1513218414.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:54.415Z,1513218414.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:54.763Z,1513218414.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:54.839Z,1513218414.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:55.170Z,1513218415.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:55.184Z,1513218415.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:55.561Z,1513218415.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:55.595Z,1513218415.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:55.971Z,1513218415.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:55.991Z,1513218415.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:56.375Z,1513218416.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:56.389Z,1513218416.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:56.773Z,1513218416.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:56.788Z,1513218416.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:57.174Z,1513218417.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:57.195Z,1513218417.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:57.594Z,1513218417.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:57.630Z,1513218417.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:57.957Z,1513218417.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:57.988Z,1513218417.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:58.357Z,1513218418.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:58.388Z,1513218418.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:58.755Z,1513218418.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:58.812Z,1513218418.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:59.241Z,1513218419.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:59.264Z,1513218419.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:59.577Z,1513218419.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:26:59.598Z,1513218419.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:26:59.988Z,1513218419.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:00.007Z,1513218420.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:00.360Z,1513218420.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:00.396Z,1513218420.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:00.795Z,1513218420.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:00.853Z,1513218420.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:01.207Z,1513218421.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:01.227Z,1513218421.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:01.565Z,1513218421.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:01.583Z,1513218421.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:01.955Z,1513218421.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:01.982Z,1513218421.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:02.379Z,1513218422.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:02.394Z,1513218422.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:02.778Z,1513218422.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:02.812Z,1513218422.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:03.170Z,1513218423.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:03.197Z,1513218423.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:03.556Z,1513218423.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:03.570Z,1513218423.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:03.958Z,1513218423.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:03.992Z,1513218423.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:04.402Z,1513218424.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:04.417Z,1513218424.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:04.768Z,1513218424.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:04.782Z,1513218424.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:05.167Z,1513218425.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:05.192Z,1513218425.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:05.577Z,1513218425.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:05.600Z,1513218425.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:05.978Z,1513218425.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:05.995Z,1513218425.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:06.356Z,1513218426.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:06.389Z,1513218426.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:06.755Z,1513218426.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:06.783Z,1513218426.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:07.190Z,1513218427.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:07.238Z,1513218427.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:07.565Z,1513218427.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:07.588Z,1513218427.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:07.963Z,1513218427.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:07.991Z,1513218427.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:08.378Z,1513218428.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:08.394Z,1513218428.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:08.794Z,1513218428.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:08.870Z,1513218428.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:09.170Z,1513218429.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:09.201Z,1513218429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:09.559Z,1513218429.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:09.590Z,1513218429.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:09.957Z,1513218429.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:09.972Z,1513218429.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:10.404Z,1513218430.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:10.440Z,1513218430.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:10.764Z,1513218430.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:10.779Z,1513218430.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:11.181Z,1513218431.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:11.212Z,1513218431.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:11.605Z,1513218431.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:11.655Z,1513218431.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:11.977Z,1513218431.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:12.011Z,1513218432.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:12.366Z,1513218432.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:12.381Z,1513218432.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:12.766Z,1513218432.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:12.782Z,1513218432.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:13.200Z,1513218433.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:13.286Z,1513218433.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:13.555Z,1513218433.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:13.570Z,1513218433.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:13.966Z,1513218433.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:14.018Z,1513218434.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:14.426Z,1513218434.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:14.442Z,1513218434.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:14.781Z,1513218434.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:14.843Z,1513218434.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:15.210Z,1513218435.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:15.235Z,1513218435.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:15.617Z,1513218435.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:15.631Z,1513218435.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:15.959Z,1513218435.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:15.974Z,1513218435.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:16.367Z,1513218436.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:16.403Z,1513218436.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:16.868Z,1513218436.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:16.929Z,1513218436.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:17.178Z,1513218437.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:17.204Z,1513218437.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:17.590Z,1513218437.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:17.612Z,1513218437.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:17.995Z,1513218437.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:18.009Z,1513218438.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:18.362Z,1513218438.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:18.390Z,1513218438.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:18.763Z,1513218438.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:18.794Z,1513218438.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:19.167Z,1513218439.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:19.184Z,1513218439.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:19.569Z,1513218439.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:19.585Z,1513218439.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:19.963Z,1513218439.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:19.979Z,1513218439.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:20.369Z,1513218440.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:20.386Z,1513218440.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:20.770Z,1513218440.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:20.857Z,1513218440.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:21.166Z,1513218441.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:21.212Z,1513218441.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:21.561Z,1513218441.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:21.593Z,1513218441.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:25.155Z,1513218445.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:25.200Z,1513218445.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:25.300Z,1513218445.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:25.347Z,1513218445.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:25.665Z,1513218445.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:25.689Z,1513218445.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:26.085Z,1513218446.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:26.100Z,1513218446.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:26.460Z,1513218446.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:26.492Z,1513218446.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:26.847Z,1513218446.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:26.861Z,1513218446.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:27.257Z,1513218447.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:27.275Z,1513218447.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:27.658Z,1513218447.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:27.673Z,1513218447.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:28.065Z,1513218448.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:28.080Z,1513218448.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:28.474Z,1513218448.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:28.498Z,1513218448.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:28.858Z,1513218448.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:28.875Z,1513218448.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:29.257Z,1513218449.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:29.295Z,1513218449.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:29.656Z,1513218449.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:29.671Z,1513218449.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:30.066Z,1513218450.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:30.081Z,1513218450.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:30.466Z,1513218450.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:30.480Z,1513218450.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:30.906Z,1513218450.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:30.931Z,1513218450.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:31.258Z,1513218451.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:31.283Z,1513218451.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:31.656Z,1513218451.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:31.679Z,1513218451.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:32.061Z,1513218452.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:32.076Z,1513218452.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:32.451Z,1513218452.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:32.474Z,1513218452.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:32.875Z,1513218452.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:32.915Z,1513218452.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:33.266Z,1513218453.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:33.291Z,1513218453.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:33.666Z,1513218453.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:33.699Z,1513218453.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:34.070Z,1513218454.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:34.085Z,1513218454.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:34.448Z,1513218454.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:34.475Z,1513218454.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:34.942Z,1513218454.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:34.995Z,1513218454.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:35.262Z,1513218455.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:35.299Z,1513218455.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:35.657Z,1513218455.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:35.672Z,1513218455.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:36.058Z,1513218456.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:36.074Z,1513218456.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:36.526Z,1513218456.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:36.596Z,1513218456.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:36.898Z,1513218456.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:36.979Z,1513218456.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:37.268Z,1513218457.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:37.287Z,1513218457.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:37.664Z,1513218457.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:37.679Z,1513218457.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:38.055Z,1513218458.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:38.106Z,1513218458.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:38.455Z,1513218458.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:38.478Z,1513218458.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:38.905Z,1513218458.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:38.995Z,1513218458.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:39.273Z,1513218459.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:39.320Z,1513218459.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:39.675Z,1513218459.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:39.690Z,1513218459.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:40.071Z,1513218460.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:40.085Z,1513218460.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:40.444Z,1513218460.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:40.479Z,1513218460.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:40.847Z,1513218460.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:40.874Z,1513218460.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:41.275Z,1513218461.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:41.293Z,1513218461.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:41.655Z,1513218461.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:41.687Z,1513218461.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:42.076Z,1513218462.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:42.092Z,1513218462.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:42.462Z,1513218462.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:42.489Z,1513218462.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:42.857Z,1513218462.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:42.873Z,1513218462.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:43.252Z,1513218463.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:43.280Z,1513218463.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:43.656Z,1513218463.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:43.671Z,1513218463.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:44.062Z,1513218464.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:44.078Z,1513218464.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:44.465Z,1513218464.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:44.487Z,1513218464.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:44.891Z,1513218464.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:44.934Z,1513218464.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:45.248Z,1513218465.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:45.291Z,1513218465.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:45.658Z,1513218465.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:45.673Z,1513218465.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:46.057Z,1513218466.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:46.071Z,1513218466.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:46.455Z,1513218466.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:46.470Z,1513218466.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:46.890Z,1513218466.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:46.938Z,1513218466.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:47.267Z,1513218467.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:47.331Z,1513218467.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:47.670Z,1513218467.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:47.686Z,1513218467.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:48.070Z,1513218468.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:48.084Z,1513218468.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:48.447Z,1513218468.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:48.530Z,1513218468.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:48.896Z,1513218468.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:48.935Z,1513218468.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:49.248Z,1513218469.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:49.283Z,1513218469.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:49.647Z,1513218469.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:49.680Z,1513218469.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:50.065Z,1513218470.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:50.084Z,1513218470.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:50.468Z,1513218470.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:50.486Z,1513218470.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:50.914Z,1513218470.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:50.929Z,1513218470.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:51.252Z,1513218471.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:51.279Z,1513218471.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:51.746Z,1513218471.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:51.788Z,1513218471.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:52.047Z,1513218472.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:52.083Z,1513218472.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:52.451Z,1513218472.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:52.483Z,1513218472.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:52.859Z,1513218472.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:52.963Z,1513218472.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:53.265Z,1513218473.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:53.291Z,1513218473.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:53.665Z,1513218473.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:53.696Z,1513218473.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:54.067Z,1513218474.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:54.091Z,1513218474.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:54.452Z,1513218474.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:54.471Z,1513218474.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:54.852Z,1513218474.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:54.867Z,1513218474.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:55.252Z,1513218475.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:55.275Z,1513218475.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:55.660Z,1513218475.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:55.679Z,1513218475.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:56.070Z,1513218476.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:56.085Z,1513218476.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:56.470Z,1513218476.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:56.484Z,1513218476.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:56.865Z,1513218476.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:56.883Z,1513218476.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:57.270Z,1513218477.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:57.285Z,1513218477.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:57.647Z,1513218477.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:57.684Z,1513218477.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:58.097Z,1513218478.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:58.134Z,1513218478.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:58.471Z,1513218478.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:58.479Z,1513218478.479 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:27:58.480Z,1513218478.480 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:27:58.480Z,1513218478.480 [BPC1](ERROR): Data Fault
2017-12-14T02:27:58.488Z,1513218478.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:58.502Z,1513218478.502 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:27:58.904Z,1513218478.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:58.919Z,1513218478.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:59.256Z,1513218479.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:59.275Z,1513218479.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:59.657Z,1513218479.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:27:59.671Z,1513218479.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:27:59.714Z,1513218479.714 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:27:59.714Z,1513218479.714 [BPC1] No Fault, FailCount= 1
2017-12-14T02:28:00.057Z,1513218480.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:00.138Z,1513218480.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:00.453Z,1513218480.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:00.468Z,1513218480.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:00.893Z,1513218480.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:00.916Z,1513218480.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:01.274Z,1513218481.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:01.309Z,1513218481.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:01.667Z,1513218481.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:01.714Z,1513218481.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:02.066Z,1513218482.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:02.081Z,1513218482.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:02.456Z,1513218482.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:02.471Z,1513218482.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:02.895Z,1513218482.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:02.930Z,1513218482.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:03.260Z,1513218483.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:03.280Z,1513218483.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:03.647Z,1513218483.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:03.679Z,1513218483.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:04.065Z,1513218484.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:04.080Z,1513218484.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:04.471Z,1513218484.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:04.485Z,1513218484.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:04.926Z,1513218484.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:04.991Z,1513218484.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:05.248Z,1513218485.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:05.294Z,1513218485.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:05.647Z,1513218485.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:05.663Z,1513218485.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:06.051Z,1513218486.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:06.095Z,1513218486.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:06.453Z,1513218486.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:06.467Z,1513218486.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:06.843Z,1513218486.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:06.947Z,1513218486.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:07.265Z,1513218487.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:07.280Z,1513218487.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:07.666Z,1513218487.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:07.680Z,1513218487.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:08.062Z,1513218488.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:08.076Z,1513218488.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:08.454Z,1513218488.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:08.514Z,1513218488.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:08.854Z,1513218488.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:08.868Z,1513218488.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:09.265Z,1513218489.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:09.296Z,1513218489.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:09.648Z,1513218489.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:09.675Z,1513218489.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:10.069Z,1513218490.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:10.090Z,1513218490.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:10.471Z,1513218490.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:10.487Z,1513218490.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:10.870Z,1513218490.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:10.884Z,1513218490.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:11.287Z,1513218491.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:11.336Z,1513218491.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:11.655Z,1513218491.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:11.670Z,1513218491.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:12.056Z,1513218492.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:12.075Z,1513218492.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:12.457Z,1513218492.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:12.472Z,1513218492.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:12.892Z,1513218492.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:12.927Z,1513218492.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:13.260Z,1513218493.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:13.299Z,1513218493.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:13.662Z,1513218493.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:13.676Z,1513218493.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:14.073Z,1513218494.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:14.088Z,1513218494.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:14.482Z,1513218494.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:14.510Z,1513218494.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:14.890Z,1513218494.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:14.920Z,1513218494.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:15.265Z,1513218495.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:15.288Z,1513218495.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:15.662Z,1513218495.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:15.683Z,1513218495.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:16.062Z,1513218496.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:16.077Z,1513218496.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:16.468Z,1513218496.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:16.487Z,1513218496.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:16.905Z,1513218496.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:16.933Z,1513218496.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:17.280Z,1513218497.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:17.304Z,1513218497.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:17.674Z,1513218497.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:17.714Z,1513218497.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:18.052Z,1513218498.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:18.090Z,1513218498.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:18.460Z,1513218498.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:18.475Z,1513218498.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:18.899Z,1513218498.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:18.936Z,1513218498.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:19.273Z,1513218499.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:19.292Z,1513218499.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:19.670Z,1513218499.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:19.759Z,1513218499.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:20.070Z,1513218500.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:20.139Z,1513218500.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:20.447Z,1513218500.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:20.511Z,1513218500.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:20.917Z,1513218500.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:20.980Z,1513218500.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:20.983Z,1513218500.983 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:28:20.983Z,1513218500.983 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:28:20.983Z,1513218500.983 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:28:20.984Z,1513218500.984 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:28:21.249Z,1513218501.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:21.307Z,1513218501.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:21.310Z,1513218501.310 [Default:CheckIn:D] Stopped
2017-12-14T02:28:21.310Z,1513218501.310 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:28:21.656Z,1513218501.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:21.691Z,1513218501.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 115.098665 min 
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn:E] Stopped
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn] Stopped
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:28:21.696Z,1513218501.696 [Default:CheckIn](INFO): Running loop #12
2017-12-14T02:28:21.697Z,1513218501.697 [Default:CheckIn] Running Loop=12
2017-12-14T02:28:21.697Z,1513218501.697 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:28:21.697Z,1513218501.697 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:28:25.298Z,1513218505.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:25.355Z,1513218505.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:25.476Z,1513218505.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:25.491Z,1513218505.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:25.838Z,1513218505.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:25.853Z,1513218505.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:26.233Z,1513218506.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:26.247Z,1513218506.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:26.619Z,1513218506.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:26.655Z,1513218506.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:27.043Z,1513218507.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:27.058Z,1513218507.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:27.451Z,1513218507.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:27.485Z,1513218507.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:27.843Z,1513218507.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:27.859Z,1513218507.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:28.220Z,1513218508.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:28.255Z,1513218508.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:28.623Z,1513218508.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:28.649Z,1513218508.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:29.046Z,1513218509.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:29.061Z,1513218509.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:29.443Z,1513218509.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:29.458Z,1513218509.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:29.844Z,1513218509.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:29.867Z,1513218509.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:30.221Z,1513218510.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:30.249Z,1513218510.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:30.622Z,1513218510.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:30.673Z,1513218510.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:31.034Z,1513218511.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:31.059Z,1513218511.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:31.439Z,1513218511.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:31.461Z,1513218511.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:31.850Z,1513218511.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:31.875Z,1513218511.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:32.224Z,1513218512.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:32.240Z,1513218512.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:32.617Z,1513218512.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:32.640Z,1513218512.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:33.053Z,1513218513.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:33.075Z,1513218513.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:33.437Z,1513218513.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:33.484Z,1513218513.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:33.834Z,1513218513.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:33.867Z,1513218513.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:34.228Z,1513218514.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:34.267Z,1513218514.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:34.628Z,1513218514.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:34.643Z,1513218514.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:35.030Z,1513218515.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:35.063Z,1513218515.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:35.438Z,1513218515.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:35.463Z,1513218515.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:35.837Z,1513218515.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:35.861Z,1513218515.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:36.226Z,1513218516.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:36.256Z,1513218516.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:36.632Z,1513218516.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:36.647Z,1513218516.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:37.034Z,1513218517.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:37.049Z,1513218517.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:37.435Z,1513218517.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:37.450Z,1513218517.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:37.832Z,1513218517.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:37.847Z,1513218517.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:38.230Z,1513218518.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:38.244Z,1513218518.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:38.625Z,1513218518.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:38.640Z,1513218518.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:39.034Z,1513218519.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:39.049Z,1513218519.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:39.434Z,1513218519.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:39.455Z,1513218519.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:39.831Z,1513218519.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:39.854Z,1513218519.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:40.227Z,1513218520.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:40.243Z,1513218520.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:40.629Z,1513218520.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:40.644Z,1513218520.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:41.037Z,1513218521.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:41.052Z,1513218521.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:41.437Z,1513218521.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:41.452Z,1513218521.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:41.838Z,1513218521.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:41.859Z,1513218521.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:42.228Z,1513218522.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:42.244Z,1513218522.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:42.623Z,1513218522.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:42.644Z,1513218522.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:43.042Z,1513218523.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:43.087Z,1513218523.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:43.439Z,1513218523.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:43.458Z,1513218523.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:43.844Z,1513218523.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:43.859Z,1513218523.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:44.224Z,1513218524.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:44.259Z,1513218524.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:44.619Z,1513218524.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:44.644Z,1513218524.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:45.038Z,1513218525.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:45.052Z,1513218525.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:45.443Z,1513218525.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:45.530Z,1513218525.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:45.830Z,1513218525.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:45.860Z,1513218525.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:46.270Z,1513218526.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:46.320Z,1513218526.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:46.624Z,1513218526.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:46.643Z,1513218526.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:47.041Z,1513218527.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:47.095Z,1513218527.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:47.437Z,1513218527.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:47.460Z,1513218527.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:47.841Z,1513218527.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:47.873Z,1513218527.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:48.228Z,1513218528.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:48.251Z,1513218528.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:48.628Z,1513218528.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:48.643Z,1513218528.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:49.033Z,1513218529.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:49.048Z,1513218529.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:49.447Z,1513218529.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:49.480Z,1513218529.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:49.842Z,1513218529.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:49.877Z,1513218529.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:50.228Z,1513218530.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:50.243Z,1513218530.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:50.620Z,1513218530.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:50.639Z,1513218530.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:51.034Z,1513218531.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:51.048Z,1513218531.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:51.433Z,1513218531.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:51.448Z,1513218531.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:51.833Z,1513218531.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:51.848Z,1513218531.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:52.232Z,1513218532.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:52.247Z,1513218532.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:52.651Z,1513218532.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:52.698Z,1513218532.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:53.032Z,1513218533.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:53.048Z,1513218533.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:53.433Z,1513218533.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:53.448Z,1513218533.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:53.834Z,1513218533.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:53.848Z,1513218533.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:54.226Z,1513218534.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:54.249Z,1513218534.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:54.632Z,1513218534.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:54.651Z,1513218534.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:55.042Z,1513218535.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:55.057Z,1513218535.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:55.442Z,1513218535.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:55.492Z,1513218535.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:55.868Z,1513218535.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:55.902Z,1513218535.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:56.219Z,1513218536.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:56.252Z,1513218536.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:56.633Z,1513218536.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:56.655Z,1513218536.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:57.020Z,1513218537.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:57.047Z,1513218537.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:57.421Z,1513218537.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:57.459Z,1513218537.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:57.813Z,1513218537.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:57.851Z,1513218537.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:58.242Z,1513218538.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:58.257Z,1513218538.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:58.642Z,1513218538.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:58.656Z,1513218538.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:59.076Z,1513218539.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:59.103Z,1513218539.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:59.420Z,1513218539.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:59.455Z,1513218539.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:28:59.821Z,1513218539.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:28:59.851Z,1513218539.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:00.220Z,1513218540.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:00.251Z,1513218540.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:00.623Z,1513218540.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:00.655Z,1513218540.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:00.669Z,1513218540.669 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:29:01.042Z,1513218541.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:01.057Z,1513218541.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:01.459Z,1513218541.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:01.474Z,1513218541.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:01.843Z,1513218541.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:01.857Z,1513218541.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:02.242Z,1513218542.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:02.273Z,1513218542.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:02.647Z,1513218542.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:02.667Z,1513218542.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:03.056Z,1513218543.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:03.071Z,1513218543.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:03.447Z,1513218543.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:03.462Z,1513218543.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:03.844Z,1513218543.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:03.859Z,1513218543.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:04.224Z,1513218544.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:04.257Z,1513218544.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:04.628Z,1513218544.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:04.658Z,1513218544.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:05.044Z,1513218545.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:05.059Z,1513218545.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:05.488Z,1513218545.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:05.525Z,1513218545.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:05.842Z,1513218545.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:05.875Z,1513218545.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:06.232Z,1513218546.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:06.267Z,1513218546.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:06.630Z,1513218546.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:06.644Z,1513218546.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:07.038Z,1513218547.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:07.069Z,1513218547.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:07.441Z,1513218547.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:07.499Z,1513218547.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:07.838Z,1513218547.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:07.853Z,1513218547.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:08.231Z,1513218548.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:08.245Z,1513218548.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:08.628Z,1513218548.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:08.682Z,1513218548.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:09.035Z,1513218549.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:09.057Z,1513218549.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:09.438Z,1513218549.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:09.453Z,1513218549.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:09.835Z,1513218549.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:09.859Z,1513218549.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:10.230Z,1513218550.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:10.258Z,1513218550.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:10.633Z,1513218550.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:10.642Z,1513218550.642 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:29:10.642Z,1513218550.642 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:29:10.642Z,1513218550.642 [BPC1](ERROR): Communications Fault
2017-12-14T02:29:10.650Z,1513218550.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:10.663Z,1513218550.663 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:29:11.051Z,1513218551.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:11.071Z,1513218551.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:11.438Z,1513218551.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:11.467Z,1513218551.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:11.845Z,1513218551.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:11.860Z,1513218551.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:11.874Z,1513218551.874 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:29:11.874Z,1513218551.874 [BPC1] No Fault, FailCount= 1
2017-12-14T02:29:12.219Z,1513218552.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:12.310Z,1513218552.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:12.619Z,1513218552.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:12.654Z,1513218552.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:13.043Z,1513218553.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:13.057Z,1513218553.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:13.438Z,1513218553.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:13.466Z,1513218553.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:13.838Z,1513218553.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:13.864Z,1513218553.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:14.224Z,1513218554.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:14.238Z,1513218554.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:14.627Z,1513218554.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:14.642Z,1513218554.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:15.047Z,1513218555.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:15.087Z,1513218555.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:15.442Z,1513218555.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:15.467Z,1513218555.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:15.839Z,1513218555.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:15.869Z,1513218555.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:16.219Z,1513218556.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:16.251Z,1513218556.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:16.619Z,1513218556.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:16.645Z,1513218556.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:17.040Z,1513218557.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:17.054Z,1513218557.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:17.446Z,1513218557.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:17.461Z,1513218557.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:17.844Z,1513218557.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:17.858Z,1513218557.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:18.262Z,1513218558.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:18.293Z,1513218558.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:18.619Z,1513218558.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:18.653Z,1513218558.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:19.047Z,1513218559.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:19.062Z,1513218559.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:19.440Z,1513218559.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:19.459Z,1513218559.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:19.843Z,1513218559.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:19.857Z,1513218559.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:20.224Z,1513218560.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:20.251Z,1513218560.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:20.616Z,1513218560.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:20.682Z,1513218560.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:21.037Z,1513218561.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:21.051Z,1513218561.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:21.439Z,1513218561.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:21.499Z,1513218561.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:21.841Z,1513218561.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:21.863Z,1513218561.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:25.306Z,1513218565.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:25.321Z,1513218565.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:25.420Z,1513218565.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:25.434Z,1513218565.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:25.804Z,1513218565.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:25.818Z,1513218565.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:26.214Z,1513218566.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:26.235Z,1513218566.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:26.593Z,1513218566.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:26.627Z,1513218566.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:26.983Z,1513218566.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:27.018Z,1513218567.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:27.388Z,1513218567.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:27.415Z,1513218567.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:27.821Z,1513218567.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:27.861Z,1513218567.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:28.193Z,1513218568.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:28.227Z,1513218568.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:28.610Z,1513218568.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:28.628Z,1513218568.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:28.994Z,1513218568.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:29.020Z,1513218569.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:29.387Z,1513218569.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:29.423Z,1513218569.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:29.785Z,1513218569.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:29.822Z,1513218569.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:30.188Z,1513218570.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:30.220Z,1513218570.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:30.587Z,1513218570.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:30.601Z,1513218570.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:31.002Z,1513218571.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:31.099Z,1513218571.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:31.405Z,1513218571.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:31.452Z,1513218571.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:31.801Z,1513218571.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:31.834Z,1513218571.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:32.193Z,1513218572.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:32.208Z,1513218572.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:32.590Z,1513218572.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:32.607Z,1513218572.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:32.990Z,1513218572.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:33.033Z,1513218573.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:33.406Z,1513218573.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:33.439Z,1513218573.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:33.805Z,1513218573.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:33.852Z,1513218573.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:34.205Z,1513218574.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:34.275Z,1513218574.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:34.594Z,1513218574.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:34.608Z,1513218574.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:34.609Z,1513218574.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2017-12-14T02:29:34.609Z,1513218574.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:29:34.611Z,1513218574.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:34.611Z,1513218574.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2017-12-14T02:29:34.611Z,1513218574.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:29:34.613Z,1513218574.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:34.613Z,1513218574.613 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2017-12-14T02:29:34.613Z,1513218574.613 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:29:34.645Z,1513218574.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:29:34.645Z,1513218574.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:29:34.646Z,1513218574.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:29:34.986Z,1513218574.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:35.038Z,1513218575.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:29:35.038Z,1513218575.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2017-12-14T02:29:35.038Z,1513218575.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:29:35.038Z,1513218575.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2017-12-14T02:29:35.039Z,1513218575.039 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:29:35.039Z,1513218575.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2017-12-14T02:29:35.387Z,1513218575.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:35.413Z,1513218575.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:29:35.414Z,1513218575.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:29:35.414Z,1513218575.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:29:35.415Z,1513218575.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:29:35.415Z,1513218575.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:29:35.415Z,1513218575.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:29:35.416Z,1513218575.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:29:35.416Z,1513218575.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:29:35.416Z,1513218575.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:29:35.787Z,1513218575.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:35.806Z,1513218575.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:36.206Z,1513218576.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:36.221Z,1513218576.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:36.605Z,1513218576.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:36.620Z,1513218576.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:37.008Z,1513218577.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:37.023Z,1513218577.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:37.402Z,1513218577.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:37.455Z,1513218577.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:37.783Z,1513218577.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:37.819Z,1513218577.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:38.196Z,1513218578.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:38.211Z,1513218578.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:38.584Z,1513218578.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:38.620Z,1513218578.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:38.996Z,1513218578.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:39.011Z,1513218579.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:39.402Z,1513218579.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:39.429Z,1513218579.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:39.806Z,1513218579.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:39.827Z,1513218579.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:40.205Z,1513218580.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:40.220Z,1513218580.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:40.588Z,1513218580.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:40.656Z,1513218580.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:40.983Z,1513218580.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:41.010Z,1513218581.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:41.398Z,1513218581.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:41.449Z,1513218581.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:41.788Z,1513218581.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:41.816Z,1513218581.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:42.203Z,1513218582.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:42.262Z,1513218582.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:42.606Z,1513218582.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:42.622Z,1513218582.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:43.014Z,1513218583.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:43.036Z,1513218583.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:43.384Z,1513218583.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:43.411Z,1513218583.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:43.833Z,1513218583.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:43.886Z,1513218583.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:44.185Z,1513218584.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:44.216Z,1513218584.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:44.589Z,1513218584.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:44.618Z,1513218584.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:44.984Z,1513218584.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:45.015Z,1513218585.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:45.406Z,1513218585.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:45.426Z,1513218585.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:45.813Z,1513218585.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:45.828Z,1513218585.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:46.209Z,1513218586.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:46.224Z,1513218586.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:46.581Z,1513218586.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:46.609Z,1513218586.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:46.987Z,1513218586.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:47.021Z,1513218587.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:47.384Z,1513218587.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:47.424Z,1513218587.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:47.783Z,1513218587.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:47.814Z,1513218587.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:48.197Z,1513218588.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:48.225Z,1513218588.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:48.614Z,1513218588.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:48.635Z,1513218588.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:48.998Z,1513218588.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:49.027Z,1513218589.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:49.383Z,1513218589.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:49.423Z,1513218589.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:49.791Z,1513218589.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:49.826Z,1513218589.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:50.191Z,1513218590.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:50.206Z,1513218590.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:50.594Z,1513218590.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:50.609Z,1513218590.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:51.001Z,1513218591.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:51.016Z,1513218591.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:51.403Z,1513218591.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:51.419Z,1513218591.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:51.803Z,1513218591.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:51.818Z,1513218591.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:52.200Z,1513218592.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:52.215Z,1513218592.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:52.597Z,1513218592.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:52.612Z,1513218592.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:52.992Z,1513218592.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:53.054Z,1513218593.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:53.438Z,1513218593.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:53.468Z,1513218593.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:53.784Z,1513218593.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:53.823Z,1513218593.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:54.199Z,1513218594.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:54.251Z,1513218594.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:54.613Z,1513218594.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:54.628Z,1513218594.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:54.997Z,1513218594.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:55.051Z,1513218595.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:55.385Z,1513218595.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:55.400Z,1513218595.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:55.789Z,1513218595.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:55.846Z,1513218595.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:56.188Z,1513218596.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:56.203Z,1513218596.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:56.598Z,1513218596.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:56.647Z,1513218596.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:57.001Z,1513218597.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:57.032Z,1513218597.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:57.405Z,1513218597.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:57.431Z,1513218597.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:57.806Z,1513218597.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:57.829Z,1513218597.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:58.192Z,1513218598.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:58.207Z,1513218598.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:58.589Z,1513218598.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:58.603Z,1513218598.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:58.971Z,1513218598.971 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T02:29:58.971Z,1513218598.971 [NAL9602] Data Fault, FailCount= 1
2017-12-14T02:29:58.971Z,1513218598.971 [NAL9602](ERROR): Data Fault
2017-12-14T02:29:58.988Z,1513218598.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:59.004Z,1513218599.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:59.041Z,1513218599.041 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T02:29:59.374Z,1513218599.374 [NAL9602](INFO): Powering down
2017-12-14T02:29:59.394Z,1513218599.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:59.421Z,1513218599.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:29:59.825Z,1513218599.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:29:59.870Z,1513218599.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:00.182Z,1513218600.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:00.209Z,1513218600.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:00.222Z,1513218600.222 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T02:30:00.222Z,1513218600.222 [NAL9602] No Fault, FailCount= 1
2017-12-14T02:30:00.599Z,1513218600.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:00.614Z,1513218600.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:00.997Z,1513218600.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:01.011Z,1513218601.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:01.383Z,1513218601.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:01.410Z,1513218601.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:01.782Z,1513218601.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:01.807Z,1513218601.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:02.180Z,1513218602.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:02.212Z,1513218602.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:02.595Z,1513218602.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:02.610Z,1513218602.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:02.983Z,1513218602.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:03.044Z,1513218603.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:03.401Z,1513218603.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:03.423Z,1513218603.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:03.783Z,1513218603.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:03.815Z,1513218603.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:04.194Z,1513218604.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:04.232Z,1513218604.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:04.580Z,1513218604.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:04.604Z,1513218604.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:04.982Z,1513218604.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:05.009Z,1513218605.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:05.383Z,1513218605.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:05.415Z,1513218605.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:05.796Z,1513218605.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:05.811Z,1513218605.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:06.195Z,1513218606.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:06.215Z,1513218606.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:06.582Z,1513218606.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:06.620Z,1513218606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:06.982Z,1513218606.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:07.019Z,1513218607.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:07.383Z,1513218607.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:07.419Z,1513218607.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:07.795Z,1513218607.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:07.810Z,1513218607.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:08.196Z,1513218608.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:08.210Z,1513218608.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:08.595Z,1513218608.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:08.614Z,1513218608.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:08.982Z,1513218608.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:09.015Z,1513218609.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:09.382Z,1513218609.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:09.478Z,1513218609.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:09.795Z,1513218609.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:09.815Z,1513218609.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:10.183Z,1513218610.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:10.209Z,1513218610.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:10.597Z,1513218610.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:10.619Z,1513218610.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:10.983Z,1513218610.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:11.008Z,1513218611.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:11.403Z,1513218611.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:11.435Z,1513218611.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:11.782Z,1513218611.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:11.815Z,1513218611.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:12.186Z,1513218612.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:12.214Z,1513218612.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:12.633Z,1513218612.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:12.659Z,1513218612.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:12.982Z,1513218612.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:13.014Z,1513218613.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:13.387Z,1513218613.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:13.418Z,1513218613.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:13.787Z,1513218613.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:13.818Z,1513218613.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:14.186Z,1513218614.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:14.220Z,1513218614.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:14.588Z,1513218614.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:14.619Z,1513218614.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:14.982Z,1513218614.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:15.043Z,1513218615.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:15.408Z,1513218615.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:15.424Z,1513218615.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:15.824Z,1513218615.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:15.844Z,1513218615.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:16.188Z,1513218616.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:16.242Z,1513218616.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:16.584Z,1513218616.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:16.599Z,1513218616.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:16.992Z,1513218616.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:17.025Z,1513218617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:17.386Z,1513218617.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:17.443Z,1513218617.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:17.790Z,1513218617.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:17.804Z,1513218617.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:18.186Z,1513218618.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:18.242Z,1513218618.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:18.590Z,1513218618.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:18.604Z,1513218618.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:19.033Z,1513218619.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:19.088Z,1513218619.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:19.389Z,1513218619.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:19.404Z,1513218619.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:19.791Z,1513218619.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:19.805Z,1513218619.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:20.185Z,1513218620.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:20.199Z,1513218620.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:20.586Z,1513218620.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:20.600Z,1513218620.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:20.991Z,1513218620.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:21.027Z,1513218621.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:21.390Z,1513218621.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:21.404Z,1513218621.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:21.783Z,1513218621.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:21.798Z,1513218621.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:22.234Z,1513218622.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:22.286Z,1513218622.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:25.676Z,1513218625.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:25.690Z,1513218625.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:25.783Z,1513218625.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:25.799Z,1513218625.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:26.177Z,1513218626.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:26.191Z,1513218626.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:26.570Z,1513218626.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:26.617Z,1513218626.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:26.959Z,1513218626.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:26.985Z,1513218626.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:27.359Z,1513218627.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:27.390Z,1513218627.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:27.771Z,1513218627.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:27.785Z,1513218627.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:28.158Z,1513218628.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:28.196Z,1513218628.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:28.559Z,1513218628.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:28.647Z,1513218628.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:28.964Z,1513218628.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:28.987Z,1513218628.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:29.372Z,1513218629.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:29.388Z,1513218629.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:29.747Z,1513218629.747 [NAL9602](INFO): Powering up NAL9602
2017-12-14T02:30:29.764Z,1513218629.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:29.783Z,1513218629.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:30.165Z,1513218630.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:30.179Z,1513218630.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:30.568Z,1513218630.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:30.583Z,1513218630.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:30.969Z,1513218630.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:30.983Z,1513218630.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:31.367Z,1513218631.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:31.387Z,1513218631.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:31.824Z,1513218631.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:31.858Z,1513218631.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:32.158Z,1513218632.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:32.183Z,1513218632.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:32.562Z,1513218632.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:32.587Z,1513218632.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:32.958Z,1513218632.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:32.985Z,1513218632.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:33.359Z,1513218633.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:33.395Z,1513218633.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:33.763Z,1513218633.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:33.795Z,1513218633.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:34.162Z,1513218634.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:34.190Z,1513218634.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:34.558Z,1513218634.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:34.583Z,1513218634.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:34.980Z,1513218634.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:35.007Z,1513218635.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:35.359Z,1513218635.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:35.395Z,1513218635.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:35.765Z,1513218635.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:35.779Z,1513218635.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:36.160Z,1513218636.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:36.175Z,1513218636.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:36.566Z,1513218636.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:36.608Z,1513218636.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:36.965Z,1513218636.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:37.019Z,1513218637.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:37.368Z,1513218637.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:37.383Z,1513218637.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:37.768Z,1513218637.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:37.783Z,1513218637.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:38.205Z,1513218638.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:38.232Z,1513218638.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:38.567Z,1513218638.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:38.629Z,1513218638.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:38.967Z,1513218638.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:38.982Z,1513218638.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:39.369Z,1513218639.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:39.410Z,1513218639.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:39.768Z,1513218639.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:39.783Z,1513218639.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:40.170Z,1513218640.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:40.215Z,1513218640.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:40.551Z,1513218640.551 [NAL9602](INFO): NAL9602 initialized
2017-12-14T02:30:40.568Z,1513218640.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:40.583Z,1513218640.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:40.967Z,1513218640.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:40.981Z,1513218640.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:41.409Z,1513218641.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:41.436Z,1513218641.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:41.774Z,1513218641.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:41.788Z,1513218641.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:42.174Z,1513218642.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:42.189Z,1513218642.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:42.571Z,1513218642.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:42.587Z,1513218642.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:42.967Z,1513218642.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:42.982Z,1513218642.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:43.368Z,1513218643.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:43.383Z,1513218643.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:43.773Z,1513218643.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:43.788Z,1513218643.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:44.174Z,1513218644.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:44.188Z,1513218644.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:44.584Z,1513218644.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:44.620Z,1513218644.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:44.974Z,1513218644.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:44.989Z,1513218644.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:45.370Z,1513218645.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:45.384Z,1513218645.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:45.771Z,1513218645.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:45.786Z,1513218645.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:46.174Z,1513218646.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:46.189Z,1513218646.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:46.569Z,1513218646.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:46.584Z,1513218646.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:46.977Z,1513218646.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:46.999Z,1513218646.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:47.381Z,1513218647.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:47.397Z,1513218647.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:47.815Z,1513218647.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:47.839Z,1513218647.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:48.165Z,1513218648.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:48.191Z,1513218648.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:48.576Z,1513218648.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:48.627Z,1513218648.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:48.970Z,1513218648.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:48.991Z,1513218648.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:49.380Z,1513218649.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:49.403Z,1513218649.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:49.781Z,1513218649.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:49.797Z,1513218649.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:50.180Z,1513218650.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:50.199Z,1513218650.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:50.572Z,1513218650.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:50.586Z,1513218650.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:51.000Z,1513218651.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:51.032Z,1513218651.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:51.382Z,1513218651.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:51.403Z,1513218651.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:51.779Z,1513218651.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:51.793Z,1513218651.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:52.186Z,1513218652.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:52.201Z,1513218652.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:52.584Z,1513218652.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:52.604Z,1513218652.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:52.982Z,1513218652.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:52.997Z,1513218652.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:53.372Z,1513218653.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:53.392Z,1513218653.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:53.773Z,1513218653.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:53.788Z,1513218653.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:54.215Z,1513218654.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:54.255Z,1513218654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:54.559Z,1513218654.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:54.587Z,1513218654.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:54.981Z,1513218654.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:54.996Z,1513218654.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:55.385Z,1513218655.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:55.400Z,1513218655.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:55.779Z,1513218655.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:55.794Z,1513218655.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:56.171Z,1513218656.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:56.191Z,1513218656.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:56.574Z,1513218656.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:56.589Z,1513218656.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:56.960Z,1513218656.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:56.987Z,1513218656.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:57.420Z,1513218657.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:57.451Z,1513218657.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:57.782Z,1513218657.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:57.796Z,1513218657.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:58.191Z,1513218658.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:58.211Z,1513218658.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:58.564Z,1513218658.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:58.599Z,1513218658.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:58.978Z,1513218658.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:59.039Z,1513218659.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:59.360Z,1513218659.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:59.401Z,1513218659.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:30:59.764Z,1513218659.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:30:59.791Z,1513218659.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:00.179Z,1513218660.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:00.200Z,1513218660.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:00.579Z,1513218660.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:00.618Z,1513218660.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:00.996Z,1513218660.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:01.019Z,1513218661.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:01.373Z,1513218661.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:01.398Z,1513218661.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:01.762Z,1513218661.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:01.777Z,1513218661.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:02.173Z,1513218662.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:02.217Z,1513218662.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:02.567Z,1513218662.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:02.581Z,1513218662.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:02.981Z,1513218662.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:02.996Z,1513218662.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:03.379Z,1513218663.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:03.394Z,1513218663.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:03.805Z,1513218663.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:03.813Z,1513218663.813 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:31:03.813Z,1513218663.813 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:31:03.813Z,1513218663.813 [BPC1](ERROR): Communications Fault
2017-12-14T02:31:03.878Z,1513218663.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:03.912Z,1513218663.912 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:31:04.169Z,1513218664.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:04.189Z,1513218664.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:04.576Z,1513218664.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:04.592Z,1513218664.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:04.972Z,1513218664.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:04.987Z,1513218664.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:05.025Z,1513218665.025 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:31:05.025Z,1513218665.025 [BPC1] No Fault, FailCount= 1
2017-12-14T02:31:05.378Z,1513218665.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:05.464Z,1513218665.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:05.778Z,1513218665.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:05.793Z,1513218665.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:06.181Z,1513218666.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:06.196Z,1513218666.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:06.564Z,1513218666.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:06.580Z,1513218666.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:06.982Z,1513218666.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:07.022Z,1513218667.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:07.377Z,1513218667.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:07.391Z,1513218667.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:07.770Z,1513218667.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:07.784Z,1513218667.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:08.182Z,1513218668.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:08.197Z,1513218668.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:08.581Z,1513218668.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:08.596Z,1513218668.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:08.982Z,1513218668.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:08.997Z,1513218668.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:09.375Z,1513218669.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:09.396Z,1513218669.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:09.771Z,1513218669.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:09.788Z,1513218669.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:10.181Z,1513218670.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:10.204Z,1513218670.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:10.576Z,1513218670.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:10.591Z,1513218670.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:10.975Z,1513218670.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:10.990Z,1513218670.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:11.382Z,1513218671.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:11.398Z,1513218671.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:11.784Z,1513218671.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:11.803Z,1513218671.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:12.182Z,1513218672.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:12.196Z,1513218672.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:12.560Z,1513218672.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:12.587Z,1513218672.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:12.962Z,1513218672.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:12.989Z,1513218672.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:13.406Z,1513218673.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:13.454Z,1513218673.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:13.759Z,1513218673.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:13.810Z,1513218673.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:14.186Z,1513218674.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:14.200Z,1513218674.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:14.583Z,1513218674.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:14.598Z,1513218674.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:14.970Z,1513218674.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:14.998Z,1513218674.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:15.359Z,1513218675.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:15.400Z,1513218675.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:15.763Z,1513218675.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:15.795Z,1513218675.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:16.163Z,1513218676.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:16.248Z,1513218676.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:16.623Z,1513218676.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:16.664Z,1513218676.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:16.000Z,1513218677.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:17.079Z,1513218677.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:17.389Z,1513218677.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:17.432Z,1513218677.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:17.782Z,1513218677.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:17.808Z,1513218677.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:18.180Z,1513218678.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:18.207Z,1513218678.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:18.572Z,1513218678.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:18.608Z,1513218678.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:18.966Z,1513218678.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:18.999Z,1513218678.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:19.362Z,1513218679.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:19.406Z,1513218679.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:19.762Z,1513218679.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:19.807Z,1513218679.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:20.197Z,1513218680.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:20.226Z,1513218680.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:20.591Z,1513218680.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:20.636Z,1513218680.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:20.982Z,1513218680.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:21.023Z,1513218681.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:21.370Z,1513218681.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:21.423Z,1513218681.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:21.768Z,1513218681.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:21.823Z,1513218681.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:22.177Z,1513218682.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:22.203Z,1513218682.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:22.571Z,1513218682.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:22.596Z,1513218682.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:26.627Z,1513218686.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:26.725Z,1513218686.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:26.884Z,1513218686.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:26.950Z,1513218686.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:27.255Z,1513218687.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:27.336Z,1513218687.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:27.606Z,1513218687.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:27.659Z,1513218687.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:27.975Z,1513218687.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:28.026Z,1513218688.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:28.386Z,1513218688.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:28.446Z,1513218688.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:28.789Z,1513218688.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:28.892Z,1513218688.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:29.190Z,1513218689.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:29.215Z,1513218689.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:29.597Z,1513218689.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:29.623Z,1513218689.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:29.992Z,1513218689.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:30.026Z,1513218690.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:30.379Z,1513218690.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:30.419Z,1513218690.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:30.804Z,1513218690.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:30.923Z,1513218690.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:31.174Z,1513218691.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:31.254Z,1513218691.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:31.570Z,1513218691.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:31.641Z,1513218691.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:31.972Z,1513218691.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:32.015Z,1513218692.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:32.388Z,1513218692.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:32.458Z,1513218692.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:32.788Z,1513218692.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:32.896Z,1513218692.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:33.190Z,1513218693.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:33.211Z,1513218693.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:33.599Z,1513218693.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:33.618Z,1513218693.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:33.969Z,1513218693.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:34.014Z,1513218694.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:34.373Z,1513218694.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:34.447Z,1513218694.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:34.772Z,1513218694.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:34.886Z,1513218694.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:35.192Z,1513218695.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:35.223Z,1513218695.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:35.596Z,1513218695.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:35.611Z,1513218695.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:35.990Z,1513218695.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:36.029Z,1513218696.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:36.375Z,1513218696.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:36.409Z,1513218696.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:36.771Z,1513218696.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:36.827Z,1513218696.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:37.182Z,1513218697.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:37.196Z,1513218697.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:37.579Z,1513218697.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:37.598Z,1513218697.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:37.990Z,1513218697.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:38.027Z,1513218698.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:38.390Z,1513218698.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:38.405Z,1513218698.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:38.790Z,1513218698.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:38.805Z,1513218698.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:39.213Z,1513218699.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:39.252Z,1513218699.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:39.571Z,1513218699.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:39.602Z,1513218699.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:39.982Z,1513218699.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:40.010Z,1513218700.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:40.385Z,1513218700.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:40.411Z,1513218700.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:40.786Z,1513218700.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:40.819Z,1513218700.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:41.226Z,1513218701.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:41.270Z,1513218701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:41.574Z,1513218701.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:41.598Z,1513218701.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:41.985Z,1513218701.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:42.015Z,1513218702.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:42.401Z,1513218702.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:42.467Z,1513218702.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:42.857Z,1513218702.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:42.877Z,1513218702.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:43.171Z,1513218703.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:43.215Z,1513218703.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:43.576Z,1513218703.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:43.607Z,1513218703.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:43.978Z,1513218703.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:44.013Z,1513218704.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:44.389Z,1513218704.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:44.419Z,1513218704.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:44.785Z,1513218704.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:44.875Z,1513218704.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:45.198Z,1513218705.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:45.227Z,1513218705.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:45.575Z,1513218705.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:45.594Z,1513218705.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:45.980Z,1513218705.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:46.016Z,1513218706.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:46.371Z,1513218706.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:46.411Z,1513218706.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:46.766Z,1513218706.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:46.879Z,1513218706.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:47.198Z,1513218707.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:47.217Z,1513218707.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:47.590Z,1513218707.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:47.643Z,1513218707.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:48.003Z,1513218708.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:48.023Z,1513218708.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:48.378Z,1513218708.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:48.405Z,1513218708.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:48.771Z,1513218708.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:48.785Z,1513218708.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:49.179Z,1513218709.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:49.252Z,1513218709.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:49.612Z,1513218709.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:49.634Z,1513218709.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:49.990Z,1513218709.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:50.033Z,1513218710.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:50.394Z,1513218710.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:50.409Z,1513218710.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:50.789Z,1513218710.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:50.812Z,1513218710.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:51.172Z,1513218711.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:51.203Z,1513218711.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:51.590Z,1513218711.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:51.605Z,1513218711.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:51.986Z,1513218711.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:52.009Z,1513218712.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:52.431Z,1513218712.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:52.463Z,1513218712.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:52.795Z,1513218712.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:52.811Z,1513218712.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:53.208Z,1513218713.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:53.259Z,1513218713.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:53.579Z,1513218713.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:53.593Z,1513218713.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:53.990Z,1513218713.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:54.017Z,1513218714.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:54.389Z,1513218714.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:54.415Z,1513218714.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:54.794Z,1513218714.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:54.827Z,1513218714.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:55.221Z,1513218715.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:55.264Z,1513218715.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:55.615Z,1513218715.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:55.662Z,1513218715.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:55.999Z,1513218715.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:56.047Z,1513218716.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:56.399Z,1513218716.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:56.414Z,1513218716.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:56.786Z,1513218716.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:56.868Z,1513218716.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:57.179Z,1513218717.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:57.194Z,1513218717.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:57.576Z,1513218717.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:57.608Z,1513218717.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:57.995Z,1513218717.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:58.026Z,1513218718.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:58.386Z,1513218718.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:58.424Z,1513218718.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:58.820Z,1513218718.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:58.902Z,1513218718.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:59.172Z,1513218719.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:59.200Z,1513218719.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:59.572Z,1513218719.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:31:59.611Z,1513218719.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:31:59.975Z,1513218719.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:00.012Z,1513218720.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:00.394Z,1513218720.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:00.410Z,1513218720.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:00.831Z,1513218720.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:00.906Z,1513218720.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:01.186Z,1513218721.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:01.208Z,1513218721.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:01.581Z,1513218721.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:01.596Z,1513218721.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:01.976Z,1513218721.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:02.003Z,1513218722.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:02.371Z,1513218722.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:02.414Z,1513218722.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:02.775Z,1513218722.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:02.891Z,1513218722.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:03.182Z,1513218723.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:03.218Z,1513218723.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:03.594Z,1513218723.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:03.616Z,1513218723.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:03.995Z,1513218723.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:04.015Z,1513218724.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:04.371Z,1513218724.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:04.402Z,1513218724.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:04.769Z,1513218724.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:04.783Z,1513218724.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:05.233Z,1513218725.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:05.287Z,1513218725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:05.582Z,1513218725.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:05.597Z,1513218725.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:05.989Z,1513218725.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:06.004Z,1513218726.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:06.387Z,1513218726.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:06.407Z,1513218726.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:06.786Z,1513218726.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:06.802Z,1513218726.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:07.219Z,1513218727.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:07.267Z,1513218727.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:07.578Z,1513218727.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:07.602Z,1513218727.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:07.990Z,1513218727.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:08.014Z,1513218728.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:08.429Z,1513218728.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:08.470Z,1513218728.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:08.794Z,1513218728.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:08.823Z,1513218728.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:09.230Z,1513218729.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:09.270Z,1513218729.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:09.580Z,1513218729.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:09.643Z,1513218729.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:09.986Z,1513218729.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:10.042Z,1513218730.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:10.394Z,1513218730.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:10.408Z,1513218730.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:10.787Z,1513218730.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:10.870Z,1513218730.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:11.172Z,1513218731.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:11.211Z,1513218731.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:11.626Z,1513218731.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:11.662Z,1513218731.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:11.978Z,1513218731.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:12.023Z,1513218732.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:12.389Z,1513218732.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:12.413Z,1513218732.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:12.808Z,1513218732.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:12.898Z,1513218732.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:13.186Z,1513218733.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:13.201Z,1513218733.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:13.579Z,1513218733.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:13.607Z,1513218733.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:13.984Z,1513218733.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:13.998Z,1513218733.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:14.381Z,1513218734.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:14.395Z,1513218734.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:14.783Z,1513218734.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:14.894Z,1513218734.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:15.193Z,1513218735.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:15.223Z,1513218735.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:15.606Z,1513218735.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:15.620Z,1513218735.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:15.994Z,1513218735.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:16.023Z,1513218736.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:16.376Z,1513218736.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:16.391Z,1513218736.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:16.774Z,1513218736.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:16.788Z,1513218736.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:17.172Z,1513218737.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:17.203Z,1513218737.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:17.571Z,1513218737.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:17.604Z,1513218737.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:18.001Z,1513218738.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:18.016Z,1513218738.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:18.386Z,1513218738.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:18.407Z,1513218738.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:18.796Z,1513218738.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:18.810Z,1513218738.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:19.176Z,1513218739.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:19.202Z,1513218739.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:19.578Z,1513218739.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:19.607Z,1513218739.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:19.986Z,1513218739.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:20.001Z,1513218740.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:20.389Z,1513218740.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:20.429Z,1513218740.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:20.788Z,1513218740.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:20.805Z,1513218740.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:21.246Z,1513218741.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:21.294Z,1513218741.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:21.580Z,1513218741.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:21.599Z,1513218741.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:21.993Z,1513218741.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:22.007Z,1513218742.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:22.394Z,1513218742.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:22.414Z,1513218742.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:22.791Z,1513218742.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:22.806Z,1513218742.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:26.245Z,1513218746.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:26.260Z,1513218746.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:26.381Z,1513218746.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:26.416Z,1513218746.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:26.747Z,1513218746.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:26.762Z,1513218746.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:27.156Z,1513218747.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:27.171Z,1513218747.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:27.538Z,1513218747.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:27.564Z,1513218747.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:27.934Z,1513218747.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:27.966Z,1513218747.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:28.335Z,1513218748.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:28.351Z,1513218748.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:28.732Z,1513218748.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:28.748Z,1513218748.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:29.146Z,1513218749.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:29.161Z,1513218749.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:29.547Z,1513218749.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:29.562Z,1513218749.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:29.946Z,1513218749.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:29.961Z,1513218749.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:30.335Z,1513218750.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:30.351Z,1513218750.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:30.735Z,1513218750.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:30.891Z,1513218750.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:31.136Z,1513218751.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:31.153Z,1513218751.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:31.543Z,1513218751.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:31.563Z,1513218751.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:31.937Z,1513218751.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:31.952Z,1513218751.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:32.342Z,1513218752.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:32.359Z,1513218752.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:32.741Z,1513218752.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:32.810Z,1513218752.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:33.146Z,1513218753.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:33.174Z,1513218753.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:33.535Z,1513218753.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:33.587Z,1513218753.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:33.939Z,1513218753.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:33.975Z,1513218753.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:34.341Z,1513218754.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:34.399Z,1513218754.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:34.734Z,1513218754.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:34.751Z,1513218754.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:35.170Z,1513218755.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:35.239Z,1513218755.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:35.546Z,1513218755.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:35.561Z,1513218755.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:35.561Z,1513218755.561 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2017-12-14T02:32:35.561Z,1513218755.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:32:35.563Z,1513218755.563 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:35.563Z,1513218755.563 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2017-12-14T02:32:35.563Z,1513218755.563 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:32:35.565Z,1513218755.565 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:35.566Z,1513218755.566 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2017-12-14T02:32:35.566Z,1513218755.566 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:32:35.598Z,1513218755.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:32:35.598Z,1513218755.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:32:35.599Z,1513218755.599 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:32:35.951Z,1513218755.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:36.001Z,1513218756.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:32:36.001Z,1513218756.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2017-12-14T02:32:36.002Z,1513218756.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:32:36.002Z,1513218756.002 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2017-12-14T02:32:36.002Z,1513218756.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:32:36.002Z,1513218756.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2017-12-14T02:32:36.334Z,1513218756.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:36.360Z,1513218756.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:32:36.361Z,1513218756.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:32:36.361Z,1513218756.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:32:36.362Z,1513218756.362 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:32:36.362Z,1513218756.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:32:36.362Z,1513218756.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:32:36.363Z,1513218756.363 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:32:36.363Z,1513218756.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:32:36.363Z,1513218756.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:32:36.727Z,1513218756.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:36.763Z,1513218756.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:37.196Z,1513218757.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:37.256Z,1513218757.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:37.544Z,1513218757.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:37.560Z,1513218757.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:37.943Z,1513218757.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:37.959Z,1513218757.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:38.343Z,1513218758.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:38.364Z,1513218758.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:38.746Z,1513218758.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:38.760Z,1513218758.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:39.146Z,1513218759.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:39.168Z,1513218759.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:39.531Z,1513218759.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:39.558Z,1513218759.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:39.927Z,1513218759.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:39.959Z,1513218759.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:40.328Z,1513218760.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:40.360Z,1513218760.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:40.727Z,1513218760.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:40.759Z,1513218760.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:41.144Z,1513218761.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:41.167Z,1513218761.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:41.546Z,1513218761.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:41.561Z,1513218761.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:41.946Z,1513218761.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:41.961Z,1513218761.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:42.340Z,1513218762.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:42.355Z,1513218762.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:42.729Z,1513218762.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:42.786Z,1513218762.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:43.127Z,1513218763.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:43.165Z,1513218763.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:43.548Z,1513218763.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:43.576Z,1513218763.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:43.950Z,1513218763.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:44.001Z,1513218764.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:44.351Z,1513218764.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:44.366Z,1513218764.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:44.756Z,1513218764.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:44.770Z,1513218764.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:45.141Z,1513218765.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:45.171Z,1513218765.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:45.540Z,1513218765.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:45.565Z,1513218765.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:45.933Z,1513218765.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:45.967Z,1513218765.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:46.336Z,1513218766.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:46.366Z,1513218766.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:46.763Z,1513218766.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:46.802Z,1513218766.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:47.137Z,1513218767.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:47.152Z,1513218767.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:47.542Z,1513218767.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:47.563Z,1513218767.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:47.943Z,1513218767.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:47.958Z,1513218767.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:48.335Z,1513218768.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:48.349Z,1513218768.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:48.739Z,1513218768.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:48.755Z,1513218768.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:49.151Z,1513218769.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:49.239Z,1513218769.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:49.540Z,1513218769.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:49.556Z,1513218769.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:49.935Z,1513218769.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:49.964Z,1513218769.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:50.338Z,1513218770.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:50.366Z,1513218770.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:50.741Z,1513218770.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:50.775Z,1513218770.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:51.180Z,1513218771.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:51.246Z,1513218771.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:51.534Z,1513218771.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:51.557Z,1513218771.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:51.938Z,1513218771.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:51.953Z,1513218771.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:52.342Z,1513218772.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:52.358Z,1513218772.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:52.739Z,1513218772.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:52.754Z,1513218772.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:53.167Z,1513218773.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:53.217Z,1513218773.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:53.551Z,1513218773.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:53.615Z,1513218773.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:53.951Z,1513218773.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:53.966Z,1513218773.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:54.331Z,1513218774.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:54.364Z,1513218774.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:54.731Z,1513218774.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:54.834Z,1513218774.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:55.132Z,1513218775.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:55.152Z,1513218775.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:55.533Z,1513218775.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:55.578Z,1513218775.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:55.940Z,1513218775.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:55.955Z,1513218775.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:56.355Z,1513218776.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:56.430Z,1513218776.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:56.750Z,1513218776.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:56.781Z,1513218776.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:57.142Z,1513218777.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:57.179Z,1513218777.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:57.536Z,1513218777.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:57.552Z,1513218777.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:57.933Z,1513218777.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:57.948Z,1513218777.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:58.338Z,1513218778.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:58.359Z,1513218778.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:58.736Z,1513218778.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:58.751Z,1513218778.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:59.146Z,1513218779.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:59.165Z,1513218779.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:59.576Z,1513218779.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:59.605Z,1513218779.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:32:59.947Z,1513218779.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:32:59.962Z,1513218779.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:00.327Z,1513218780.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:00.358Z,1513218780.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:00.732Z,1513218780.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:00.760Z,1513218780.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:01.127Z,1513218781.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:01.161Z,1513218781.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:01.549Z,1513218781.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:01.564Z,1513218781.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:01.931Z,1513218781.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:01.958Z,1513218781.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:02.346Z,1513218782.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:02.365Z,1513218782.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:02.763Z,1513218782.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:02.816Z,1513218782.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:03.174Z,1513218783.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:03.220Z,1513218783.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:03.534Z,1513218783.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:03.550Z,1513218783.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:03.935Z,1513218783.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:03.949Z,1513218783.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:04.338Z,1513218784.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:04.359Z,1513218784.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:04.410Z,1513218784.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:04.740Z,1513218784.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:04.793Z,1513218784.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:05.160Z,1513218785.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:05.206Z,1513218785.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:05.237Z,1513218785.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:05.546Z,1513218785.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:05.561Z,1513218785.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:05.617Z,1513218785.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:05.951Z,1513218785.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:05.996Z,1513218785.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:06.327Z,1513218786.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:06.364Z,1513218786.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:06.754Z,1513218786.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:06.769Z,1513218786.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:07.132Z,1513218787.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:07.151Z,1513218787.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:07.541Z,1513218787.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:07.556Z,1513218787.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:07.938Z,1513218787.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:07.959Z,1513218787.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:08.352Z,1513218788.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:08.384Z,1513218788.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:08.742Z,1513218788.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:08.760Z,1513218788.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:09.160Z,1513218789.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:09.203Z,1513218789.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:09.527Z,1513218789.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:09.554Z,1513218789.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:09.928Z,1513218789.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:09.955Z,1513218789.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:10.344Z,1513218790.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:10.360Z,1513218790.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:10.727Z,1513218790.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:10.766Z,1513218790.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:11.149Z,1513218791.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:11.169Z,1513218791.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:11.555Z,1513218791.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:11.571Z,1513218791.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:11.946Z,1513218791.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:11.964Z,1513218791.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:12.360Z,1513218792.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:12.421Z,1513218792.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:12.733Z,1513218792.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:12.762Z,1513218792.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:13.133Z,1513218793.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:13.157Z,1513218793.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:13.536Z,1513218793.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:13.551Z,1513218793.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:13.935Z,1513218793.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:13.950Z,1513218793.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:14.347Z,1513218794.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:14.378Z,1513218794.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:14.747Z,1513218794.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:14.782Z,1513218794.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:15.148Z,1513218795.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:15.175Z,1513218795.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:15.562Z,1513218795.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:15.623Z,1513218795.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:15.927Z,1513218795.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:15.962Z,1513218795.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:16.085Z,1513218796.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:16.332Z,1513218796.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:16.360Z,1513218796.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:16.727Z,1513218796.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:16.803Z,1513218796.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:16.881Z,1513218796.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:17.201Z,1513218797.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:17.229Z,1513218797.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:17.553Z,1513218797.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:17.618Z,1513218797.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:17.939Z,1513218797.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:17.954Z,1513218797.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:18.336Z,1513218798.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:18.382Z,1513218798.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:18.737Z,1513218798.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:18.789Z,1513218798.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:19.170Z,1513218799.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:19.236Z,1513218799.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:19.531Z,1513218799.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:19.564Z,1513218799.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:19.925Z,1513218799.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:19.957Z,1513218799.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:20.343Z,1513218800.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:20.375Z,1513218800.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:20.758Z,1513218800.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:20.772Z,1513218800.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:21.146Z,1513218801.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:21.180Z,1513218801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:21.537Z,1513218801.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:21.575Z,1513218801.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:21.979Z,1513218801.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:21.995Z,1513218801.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:22.033Z,1513218802.033 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:28:21.7Z
2017-12-14T02:33:22.034Z,1513218802.034 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:33:22.034Z,1513218802.034 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:33:22.337Z,1513218802.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:22.353Z,1513218802.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:23.193Z,1513218803.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:23.208Z,1513218803.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:23.327Z,1513218803.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:23.355Z,1513218803.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:26.736Z,1513218806.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:26.780Z,1513218806.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:26.914Z,1513218806.914 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0048.lzma
2017-12-14T02:33:26.953Z,1513218806.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:26.968Z,1513218806.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:27.334Z,1513218807.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:27.363Z,1513218807.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:27.703Z,1513218807.703 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0048.lzma.bak
2017-12-14T02:33:27.703Z,1513218807.703 [DataOverHttps](INFO): SBD MOMSN=5437420
2017-12-14T02:33:27.756Z,1513218807.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:27.771Z,1513218807.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:29.071Z,1513218809.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:29.104Z,1513218809.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:29.207Z,1513218809.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:29.250Z,1513218809.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:32.710Z,1513218812.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:32.771Z,1513218812.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:32.877Z,1513218812.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:32.914Z,1513218812.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:33.259Z,1513218813.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:33.279Z,1513218813.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:33.653Z,1513218813.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:33.667Z,1513218813.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:34.044Z,1513218814.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:34.065Z,1513218814.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:34.439Z,1513218814.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:34.468Z,1513218814.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:37.985Z,1513218817.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:38.000Z,1513218818.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:38.081Z,1513218818.081 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0049.lzma
2017-12-14T02:33:38.122Z,1513218818.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:38.156Z,1513218818.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:38.498Z,1513218818.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:38.515Z,1513218818.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:38.925Z,1513218818.925 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0049.lzma.bak
2017-12-14T02:33:38.925Z,1513218818.925 [DataOverHttps](INFO): SBD MOMSN=5437422
2017-12-14T02:33:38.964Z,1513218818.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:39.013Z,1513218819.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:40.008Z,1513218820.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:40.023Z,1513218820.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:40.042Z,1513218820.042 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:33:40.042Z,1513218820.042 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:33:40.042Z,1513218820.042 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:33:40.120Z,1513218820.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:40.151Z,1513218820.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:43.599Z,1513218823.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:43.649Z,1513218823.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:43.750Z,1513218823.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:43.765Z,1513218823.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:44.142Z,1513218824.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:44.228Z,1513218824.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:44.513Z,1513218824.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:44.553Z,1513218824.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:44.914Z,1513218824.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:44.936Z,1513218824.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:45.304Z,1513218825.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:45.326Z,1513218825.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:45.711Z,1513218825.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:45.725Z,1513218825.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:46.097Z,1513218826.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:46.135Z,1513218826.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:46.503Z,1513218826.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:46.519Z,1513218826.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:46.907Z,1513218826.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:46.931Z,1513218826.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:47.311Z,1513218827.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:47.399Z,1513218827.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:47.719Z,1513218827.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:47.751Z,1513218827.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:48.161Z,1513218828.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:48.183Z,1513218828.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:48.492Z,1513218828.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:48.534Z,1513218828.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:48.895Z,1513218828.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:48.927Z,1513218828.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:49.296Z,1513218829.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:49.345Z,1513218829.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:49.699Z,1513218829.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:49.733Z,1513218829.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:50.122Z,1513218830.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:50.149Z,1513218830.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:50.528Z,1513218830.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:50.621Z,1513218830.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:50.914Z,1513218830.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:50.947Z,1513218830.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:51.299Z,1513218831.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:51.332Z,1513218831.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:51.696Z,1513218831.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:51.742Z,1513218831.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:52.092Z,1513218832.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:52.130Z,1513218832.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:52.500Z,1513218832.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:52.548Z,1513218832.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:52.939Z,1513218832.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:52.954Z,1513218832.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:53.328Z,1513218833.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:53.343Z,1513218833.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:53.732Z,1513218833.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:53.760Z,1513218833.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:54.113Z,1513218834.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:54.147Z,1513218834.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:54.503Z,1513218834.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:54.540Z,1513218834.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:54.900Z,1513218834.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:54.921Z,1513218834.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:55.314Z,1513218835.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:55.354Z,1513218835.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:55.696Z,1513218835.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:55.749Z,1513218835.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:56.113Z,1513218836.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:56.153Z,1513218836.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:56.533Z,1513218836.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:56.549Z,1513218836.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:56.957Z,1513218836.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:57.004Z,1513218837.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:57.316Z,1513218837.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:57.352Z,1513218837.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:57.706Z,1513218837.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:57.737Z,1513218837.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:58.099Z,1513218838.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:58.166Z,1513218838.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:58.496Z,1513218838.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:58.542Z,1513218838.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:58.899Z,1513218838.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:58.946Z,1513218838.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:59.330Z,1513218839.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:59.345Z,1513218839.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:33:59.729Z,1513218839.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:33:59.743Z,1513218839.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:00.142Z,1513218840.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:00.185Z,1513218840.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:00.496Z,1513218840.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:00.524Z,1513218840.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:00.928Z,1513218840.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:00.945Z,1513218840.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:01.296Z,1513218841.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:01.335Z,1513218841.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:01.699Z,1513218841.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:01.735Z,1513218841.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:02.123Z,1513218842.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:02.155Z,1513218842.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:02.531Z,1513218842.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:02.552Z,1513218842.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:02.915Z,1513218842.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:02.959Z,1513218842.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:03.326Z,1513218843.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:03.365Z,1513218843.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:03.696Z,1513218843.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:03.785Z,1513218843.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:04.102Z,1513218844.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:04.118Z,1513218844.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:04.503Z,1513218844.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:04.595Z,1513218844.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:04.910Z,1513218844.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:04.926Z,1513218844.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:05.308Z,1513218845.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:05.363Z,1513218845.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:05.714Z,1513218845.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:05.736Z,1513218845.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:06.120Z,1513218846.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:06.171Z,1513218846.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:06.515Z,1513218846.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:06.551Z,1513218846.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:06.895Z,1513218846.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:06.924Z,1513218846.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:07.387Z,1513218847.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:07.411Z,1513218847.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:07.699Z,1513218847.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:07.746Z,1513218847.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:08.124Z,1513218848.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:08.138Z,1513218848.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:08.510Z,1513218848.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:08.576Z,1513218848.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:08.906Z,1513218848.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:08.942Z,1513218848.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:09.295Z,1513218849.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:09.311Z,1513218849.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:09.751Z,1513218849.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:09.784Z,1513218849.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:10.096Z,1513218850.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:10.144Z,1513218850.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:10.496Z,1513218850.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:10.528Z,1513218850.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:10.938Z,1513218850.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:10.976Z,1513218850.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:11.322Z,1513218851.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:11.351Z,1513218851.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:11.721Z,1513218851.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:11.756Z,1513218851.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:12.100Z,1513218852.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:12.134Z,1513218852.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:12.521Z,1513218852.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:12.540Z,1513218852.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:12.926Z,1513218852.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:12.955Z,1513218852.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:13.296Z,1513218853.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:13.349Z,1513218853.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:13.710Z,1513218853.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:13.785Z,1513218853.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:14.130Z,1513218854.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:14.151Z,1513218854.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:14.517Z,1513218854.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:14.556Z,1513218854.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:14.911Z,1513218854.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:14.951Z,1513218854.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:15.313Z,1513218855.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:15.335Z,1513218855.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:15.708Z,1513218855.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:15.731Z,1513218855.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:16.153Z,1513218856.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:16.185Z,1513218856.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:16.502Z,1513218856.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:16.527Z,1513218856.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:16.892Z,1513218856.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:16.919Z,1513218856.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:17.318Z,1513218857.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:17.351Z,1513218857.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:17.727Z,1513218857.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:17.747Z,1513218857.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:18.118Z,1513218858.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:18.145Z,1513218858.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:18.495Z,1513218858.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:18.522Z,1513218858.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:18.899Z,1513218858.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:18.935Z,1513218858.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:19.323Z,1513218859.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:19.363Z,1513218859.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:19.696Z,1513218859.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:19.744Z,1513218859.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:20.120Z,1513218860.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:20.141Z,1513218860.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:20.527Z,1513218860.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:20.542Z,1513218860.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:20.931Z,1513218860.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:20.948Z,1513218860.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:21.299Z,1513218861.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:21.344Z,1513218861.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:21.699Z,1513218861.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:21.732Z,1513218861.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:22.096Z,1513218862.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:22.136Z,1513218862.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:22.529Z,1513218862.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:22.588Z,1513218862.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:22.895Z,1513218862.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:22.956Z,1513218862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:23.334Z,1513218863.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:23.379Z,1513218863.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:23.727Z,1513218863.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:23.751Z,1513218863.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:24.133Z,1513218864.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:24.155Z,1513218864.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:24.497Z,1513218864.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:24.543Z,1513218864.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:24.939Z,1513218864.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:24.977Z,1513218864.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:25.309Z,1513218865.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:25.340Z,1513218865.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:25.699Z,1513218865.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:25.739Z,1513218865.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:26.113Z,1513218866.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:26.151Z,1513218866.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:26.513Z,1513218866.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:26.595Z,1513218866.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:26.920Z,1513218866.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:26.971Z,1513218866.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:27.307Z,1513218867.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:27.341Z,1513218867.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:27.700Z,1513218867.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:27.724Z,1513218867.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:28.105Z,1513218868.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:28.156Z,1513218868.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:28.506Z,1513218868.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:28.529Z,1513218868.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:28.926Z,1513218868.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:28.996Z,1513218868.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:29.315Z,1513218869.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:29.359Z,1513218869.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:29.716Z,1513218869.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:29.740Z,1513218869.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:30.123Z,1513218870.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:30.143Z,1513218870.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:30.511Z,1513218870.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:30.534Z,1513218870.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:30.895Z,1513218870.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:30.985Z,1513218870.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:31.305Z,1513218871.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:31.336Z,1513218871.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:31.699Z,1513218871.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:31.738Z,1513218871.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:32.167Z,1513218872.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:32.186Z,1513218872.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:32.518Z,1513218872.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:32.546Z,1513218872.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:32.921Z,1513218872.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:32.942Z,1513218872.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:33.299Z,1513218873.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:33.335Z,1513218873.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:33.696Z,1513218873.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:33.731Z,1513218873.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:34.089Z,1513218874.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:34.144Z,1513218874.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:34.496Z,1513218874.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:34.534Z,1513218874.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:34.895Z,1513218874.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:34.911Z,1513218874.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:35.348Z,1513218875.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:35.384Z,1513218875.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:35.737Z,1513218875.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:35.754Z,1513218875.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:36.111Z,1513218876.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:36.145Z,1513218876.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:36.499Z,1513218876.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:36.550Z,1513218876.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:36.895Z,1513218876.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:36.938Z,1513218876.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:37.302Z,1513218877.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:37.360Z,1513218877.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:37.703Z,1513218877.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:37.737Z,1513218877.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:38.119Z,1513218878.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:38.144Z,1513218878.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:38.542Z,1513218878.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:38.595Z,1513218878.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:38.957Z,1513218878.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:38.971Z,1513218878.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:39.305Z,1513218879.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:39.350Z,1513218879.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:39.704Z,1513218879.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:39.746Z,1513218879.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:40.110Z,1513218880.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:40.124Z,1513218880.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:40.513Z,1513218880.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:40.562Z,1513218880.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:43.998Z,1513218883.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:44.013Z,1513218884.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:44.144Z,1513218884.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:44.159Z,1513218884.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:44.477Z,1513218884.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:44.525Z,1513218884.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:44.921Z,1513218884.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:44.965Z,1513218884.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:45.276Z,1513218885.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:45.315Z,1513218885.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:45.667Z,1513218885.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:45.699Z,1513218885.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:46.064Z,1513218886.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:46.079Z,1513218886.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:46.468Z,1513218886.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:46.484Z,1513218886.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:46.881Z,1513218886.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:46.919Z,1513218886.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:47.282Z,1513218887.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:47.309Z,1513218887.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:47.679Z,1513218887.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:47.706Z,1513218887.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:48.081Z,1513218888.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:48.155Z,1513218888.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:48.468Z,1513218888.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:48.511Z,1513218888.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:48.875Z,1513218888.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:48.956Z,1513218888.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:49.266Z,1513218889.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:49.333Z,1513218889.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:49.673Z,1513218889.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:49.687Z,1513218889.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:50.081Z,1513218890.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:50.127Z,1513218890.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:50.480Z,1513218890.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:50.494Z,1513218890.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:50.887Z,1513218890.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:50.939Z,1513218890.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:51.270Z,1513218891.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:51.285Z,1513218891.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:51.660Z,1513218891.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:51.686Z,1513218891.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:52.059Z,1513218892.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:52.092Z,1513218892.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:52.472Z,1513218892.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:52.488Z,1513218892.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:52.944Z,1513218892.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:52.963Z,1513218892.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:53.286Z,1513218893.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:53.320Z,1513218893.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:53.696Z,1513218893.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:53.711Z,1513218893.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:54.074Z,1513218894.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:54.103Z,1513218894.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:54.528Z,1513218894.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:54.594Z,1513218894.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:54.867Z,1513218894.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:54.900Z,1513218894.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:55.290Z,1513218895.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:55.311Z,1513218895.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:55.667Z,1513218895.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:55.697Z,1513218895.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:56.074Z,1513218896.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:56.110Z,1513218896.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:56.485Z,1513218896.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:56.507Z,1513218896.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:56.869Z,1513218896.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:56.895Z,1513218896.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:57.285Z,1513218897.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:57.301Z,1513218897.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:57.710Z,1513218897.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:57.754Z,1513218897.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:58.075Z,1513218898.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:58.104Z,1513218898.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:58.468Z,1513218898.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:58.487Z,1513218898.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:58.879Z,1513218898.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:58.928Z,1513218898.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:59.279Z,1513218899.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:59.320Z,1513218899.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:34:59.678Z,1513218899.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:34:59.705Z,1513218899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:00.082Z,1513218900.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:00.096Z,1513218900.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:00.473Z,1513218900.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:00.488Z,1513218900.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:00.915Z,1513218900.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:00.966Z,1513218900.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:01.260Z,1513218901.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:01.307Z,1513218901.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:01.663Z,1513218901.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:01.691Z,1513218901.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:02.082Z,1513218902.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:02.098Z,1513218902.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:02.482Z,1513218902.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:02.496Z,1513218902.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:02.895Z,1513218902.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:02.912Z,1513218902.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:03.263Z,1513218903.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:03.290Z,1513218903.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:03.660Z,1513218903.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:03.695Z,1513218903.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:04.059Z,1513218904.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:04.133Z,1513218904.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:04.476Z,1513218904.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:04.504Z,1513218904.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:04.890Z,1513218904.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:04.916Z,1513218904.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:05.280Z,1513218905.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:05.295Z,1513218905.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:05.693Z,1513218905.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:05.715Z,1513218905.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:06.075Z,1513218906.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:06.107Z,1513218906.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:06.469Z,1513218906.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:06.498Z,1513218906.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:06.928Z,1513218906.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:06.960Z,1513218906.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:07.297Z,1513218907.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:07.358Z,1513218907.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:07.670Z,1513218907.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:07.703Z,1513218907.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:08.077Z,1513218908.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:08.092Z,1513218908.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:08.476Z,1513218908.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:08.492Z,1513218908.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:08.878Z,1513218908.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:08.894Z,1513218908.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:09.273Z,1513218909.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:09.295Z,1513218909.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:09.670Z,1513218909.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:09.685Z,1513218909.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:10.072Z,1513218910.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:10.091Z,1513218910.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:10.478Z,1513218910.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:10.495Z,1513218910.495 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:35:10.495Z,1513218910.495 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:35:10.495Z,1513218910.495 [BPC1](ERROR): Data Fault
2017-12-14T02:35:10.534Z,1513218910.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:10.568Z,1513218910.568 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:35:10.876Z,1513218910.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:10.902Z,1513218910.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:11.301Z,1513218911.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:11.316Z,1513218911.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:11.678Z,1513218911.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:11.700Z,1513218911.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:11.720Z,1513218911.720 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:35:11.722Z,1513218911.722 [BPC1] No Fault, FailCount= 1
2017-12-14T02:35:12.078Z,1513218912.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:12.163Z,1513218912.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:12.468Z,1513218912.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:12.505Z,1513218912.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:12.874Z,1513218912.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:12.929Z,1513218912.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:13.265Z,1513218913.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:13.280Z,1513218913.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:13.668Z,1513218913.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:13.747Z,1513218913.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:14.070Z,1513218914.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:14.110Z,1513218914.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:14.474Z,1513218914.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:14.489Z,1513218914.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:14.894Z,1513218914.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:14.926Z,1513218914.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:15.263Z,1513218915.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:15.294Z,1513218915.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:15.671Z,1513218915.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:15.687Z,1513218915.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:16.067Z,1513218916.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:16.083Z,1513218916.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:16.469Z,1513218916.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:16.484Z,1513218916.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:16.926Z,1513218916.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:16.975Z,1513218916.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:17.282Z,1513218917.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:17.322Z,1513218917.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:17.676Z,1513218917.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:17.692Z,1513218917.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:18.077Z,1513218918.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:18.100Z,1513218918.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:18.459Z,1513218918.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:18.485Z,1513218918.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:18.888Z,1513218918.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:18.911Z,1513218918.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:19.260Z,1513218919.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:19.300Z,1513218919.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:19.663Z,1513218919.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:19.695Z,1513218919.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:20.074Z,1513218920.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:20.124Z,1513218920.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:20.500Z,1513218920.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:20.561Z,1513218920.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:20.950Z,1513218920.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:20.984Z,1513218920.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:21.263Z,1513218921.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:21.296Z,1513218921.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:21.660Z,1513218921.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:21.691Z,1513218921.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:22.060Z,1513218922.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:22.076Z,1513218922.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:22.460Z,1513218922.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:22.496Z,1513218922.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:22.859Z,1513218922.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:22.895Z,1513218922.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:23.294Z,1513218923.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:23.341Z,1513218923.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:23.673Z,1513218923.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:23.688Z,1513218923.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:24.078Z,1513218924.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:24.093Z,1513218924.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:24.471Z,1513218924.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:24.486Z,1513218924.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:24.864Z,1513218924.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:24.885Z,1513218924.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:25.276Z,1513218925.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:25.299Z,1513218925.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:25.669Z,1513218925.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:25.683Z,1513218925.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:26.076Z,1513218926.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:26.095Z,1513218926.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:26.514Z,1513218926.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:26.538Z,1513218926.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:26.888Z,1513218926.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:26.924Z,1513218926.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:27.260Z,1513218927.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:27.296Z,1513218927.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:27.659Z,1513218927.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:27.684Z,1513218927.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:28.059Z,1513218928.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:28.087Z,1513218928.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:28.462Z,1513218928.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:28.489Z,1513218928.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:28.884Z,1513218928.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:28.903Z,1513218928.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:29.279Z,1513218929.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:29.316Z,1513218929.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:29.705Z,1513218929.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:29.744Z,1513218929.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:30.069Z,1513218930.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:30.112Z,1513218930.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:30.463Z,1513218930.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:30.495Z,1513218930.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:30.895Z,1513218930.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:30.938Z,1513218930.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:31.259Z,1513218931.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:31.303Z,1513218931.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:31.663Z,1513218931.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:31.697Z,1513218931.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:32.070Z,1513218932.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:32.100Z,1513218932.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:32.481Z,1513218932.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:32.578Z,1513218932.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:32.948Z,1513218932.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:32.975Z,1513218932.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:33.264Z,1513218933.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:33.303Z,1513218933.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:33.659Z,1513218933.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:33.711Z,1513218933.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:34.063Z,1513218934.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:34.103Z,1513218934.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:34.457Z,1513218934.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:34.511Z,1513218934.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:34.938Z,1513218934.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:34.964Z,1513218934.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:35.291Z,1513218935.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:35.341Z,1513218935.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:35.687Z,1513218935.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:35.702Z,1513218935.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:36.092Z,1513218936.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:36.146Z,1513218936.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:36.461Z,1513218936.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:36.495Z,1513218936.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:36.496Z,1513218936.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2017-12-14T02:35:36.496Z,1513218936.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:35:36.497Z,1513218936.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:36.498Z,1513218936.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2017-12-14T02:35:36.498Z,1513218936.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:35:36.499Z,1513218936.499 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:36.500Z,1513218936.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2017-12-14T02:35:36.500Z,1513218936.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:35:36.511Z,1513218936.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:35:36.511Z,1513218936.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:35:36.512Z,1513218936.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:35:36.855Z,1513218936.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:36.897Z,1513218936.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:35:36.897Z,1513218936.897 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2017-12-14T02:35:36.897Z,1513218936.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:35:36.898Z,1513218936.898 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2017-12-14T02:35:36.898Z,1513218936.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:35:36.898Z,1513218936.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2017-12-14T02:35:37.269Z,1513218937.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:37.282Z,1513218937.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:35:37.283Z,1513218937.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:35:37.283Z,1513218937.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:35:37.284Z,1513218937.284 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:35:37.284Z,1513218937.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:35:37.284Z,1513218937.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:35:37.285Z,1513218937.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:35:37.285Z,1513218937.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:35:37.286Z,1513218937.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:35:37.675Z,1513218937.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:37.690Z,1513218937.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:38.075Z,1513218938.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:38.102Z,1513218938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:38.481Z,1513218938.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:38.496Z,1513218938.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:38.881Z,1513218938.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:38.896Z,1513218938.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:39.274Z,1513218939.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:39.324Z,1513218939.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:39.671Z,1513218939.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:39.700Z,1513218939.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:40.067Z,1513218940.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:40.104Z,1513218940.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:40.463Z,1513218940.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:40.478Z,1513218940.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:40.889Z,1513218940.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:40.928Z,1513218940.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:44.282Z,1513218944.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:44.330Z,1513218944.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:44.438Z,1513218944.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:44.476Z,1513218944.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:44.845Z,1513218944.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:44.891Z,1513218944.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:45.201Z,1513218945.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:45.216Z,1513218945.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:45.590Z,1513218945.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:45.608Z,1513218945.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:46.015Z,1513218946.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:46.046Z,1513218946.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:46.400Z,1513218946.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:46.417Z,1513218946.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:46.803Z,1513218946.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:46.870Z,1513218946.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:47.186Z,1513218947.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:47.219Z,1513218947.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:47.579Z,1513218947.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:47.612Z,1513218947.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:47.982Z,1513218947.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:48.020Z,1513218948.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:48.405Z,1513218948.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:48.427Z,1513218948.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:48.809Z,1513218948.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:48.919Z,1513218948.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:49.176Z,1513218949.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:49.207Z,1513218949.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:49.587Z,1513218949.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:49.634Z,1513218949.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:50.002Z,1513218950.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:50.017Z,1513218950.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:50.401Z,1513218950.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:50.416Z,1513218950.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:50.806Z,1513218950.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:50.827Z,1513218950.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:51.232Z,1513218951.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:51.264Z,1513218951.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:51.588Z,1513218951.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:51.603Z,1513218951.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:51.000Z,1513218952.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:52.015Z,1513218952.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:52.400Z,1513218952.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:52.423Z,1513218952.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:52.800Z,1513218952.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:52.815Z,1513218952.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:53.215Z,1513218953.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:53.254Z,1513218953.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:53.576Z,1513218953.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:53.608Z,1513218953.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:54.002Z,1513218954.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:54.024Z,1513218954.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:54.403Z,1513218954.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:54.424Z,1513218954.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:54.816Z,1513218954.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:54.897Z,1513218954.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:55.178Z,1513218955.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:55.255Z,1513218955.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:55.592Z,1513218955.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:55.611Z,1513218955.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:55.993Z,1513218955.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:56.009Z,1513218956.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:56.392Z,1513218956.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:56.467Z,1513218956.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:56.814Z,1513218956.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:56.895Z,1513218956.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:57.187Z,1513218957.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:57.250Z,1513218957.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:57.583Z,1513218957.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:57.604Z,1513218957.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:57.997Z,1513218957.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:58.051Z,1513218958.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:58.398Z,1513218958.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:58.412Z,1513218958.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:58.821Z,1513218958.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:58.884Z,1513218958.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:59.189Z,1513218959.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:59.204Z,1513218959.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:59.588Z,1513218959.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:35:59.602Z,1513218959.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:35:59.989Z,1513218959.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:00.004Z,1513218960.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:00.394Z,1513218960.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:00.409Z,1513218960.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:00.804Z,1513218960.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:00.895Z,1513218960.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:01.182Z,1513218961.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:01.201Z,1513218961.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:01.611Z,1513218961.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:01.647Z,1513218961.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:01.989Z,1513218961.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:02.004Z,1513218962.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:02.394Z,1513218962.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:02.428Z,1513218962.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:02.795Z,1513218962.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:02.823Z,1513218962.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:03.186Z,1513218963.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:03.200Z,1513218963.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:03.580Z,1513218963.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:03.603Z,1513218963.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:03.997Z,1513218963.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:04.028Z,1513218964.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:04.397Z,1513218964.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:04.424Z,1513218964.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:04.791Z,1513218964.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:04.811Z,1513218964.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:05.266Z,1513218965.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:05.314Z,1513218965.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:05.600Z,1513218965.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:05.619Z,1513218965.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:05.986Z,1513218965.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:06.020Z,1513218966.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:06.401Z,1513218966.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:06.478Z,1513218966.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:06.802Z,1513218966.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:06.817Z,1513218966.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:07.221Z,1513218967.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:07.267Z,1513218967.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:07.579Z,1513218967.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:07.616Z,1513218967.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:08.004Z,1513218968.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:08.019Z,1513218968.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:08.400Z,1513218968.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:08.415Z,1513218968.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:08.845Z,1513218968.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:08.884Z,1513218968.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:09.184Z,1513218969.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:09.199Z,1513218969.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:09.580Z,1513218969.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:09.603Z,1513218969.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:09.998Z,1513218969.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:10.013Z,1513218970.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:10.397Z,1513218970.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:10.412Z,1513218970.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:10.804Z,1513218970.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:10.877Z,1513218970.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:11.184Z,1513218971.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:11.217Z,1513218971.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:11.576Z,1513218971.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:11.675Z,1513218971.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:11.989Z,1513218971.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:12.004Z,1513218972.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:12.394Z,1513218972.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:12.410Z,1513218972.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:12.814Z,1513218972.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:12.894Z,1513218972.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:13.184Z,1513218973.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:13.199Z,1513218973.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:13.588Z,1513218973.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:13.603Z,1513218973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:14.001Z,1513218974.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:14.016Z,1513218974.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:14.394Z,1513218974.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:14.410Z,1513218974.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:14.848Z,1513218974.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:14.903Z,1513218974.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:15.193Z,1513218975.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:15.210Z,1513218975.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:15.582Z,1513218975.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:15.605Z,1513218975.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:15.998Z,1513218975.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:16.019Z,1513218976.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:16.399Z,1513218976.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:16.419Z,1513218976.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:16.800Z,1513218976.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:16.815Z,1513218976.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:17.188Z,1513218977.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:17.231Z,1513218977.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:17.583Z,1513218977.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:17.612Z,1513218977.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:18.002Z,1513218978.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:18.017Z,1513218978.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:18.418Z,1513218978.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:18.495Z,1513218978.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:18.790Z,1513218978.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:18.828Z,1513218978.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:19.227Z,1513218979.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:19.283Z,1513218979.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:19.589Z,1513218979.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:19.603Z,1513218979.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:19.996Z,1513218979.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:20.043Z,1513218980.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:20.390Z,1513218980.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:20.431Z,1513218980.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:20.788Z,1513218980.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:20.824Z,1513218980.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:21.306Z,1513218981.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:21.378Z,1513218981.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:21.585Z,1513218981.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:21.639Z,1513218981.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:21.999Z,1513218981.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:22.019Z,1513218982.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:22.414Z,1513218982.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:22.439Z,1513218982.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:22.818Z,1513218982.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:22.905Z,1513218982.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:23.190Z,1513218983.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:23.241Z,1513218983.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:23.599Z,1513218983.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:23.666Z,1513218983.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:23.987Z,1513218983.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:24.007Z,1513218984.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:24.398Z,1513218984.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:24.423Z,1513218984.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:24.841Z,1513218984.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:24.918Z,1513218984.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:25.200Z,1513218985.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:25.223Z,1513218985.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:25.576Z,1513218985.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:25.611Z,1513218985.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:25.987Z,1513218985.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:26.008Z,1513218986.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:26.387Z,1513218986.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:26.411Z,1513218986.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:26.786Z,1513218986.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:26.897Z,1513218986.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:27.201Z,1513218987.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:27.255Z,1513218987.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:27.596Z,1513218987.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:27.628Z,1513218987.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:28.052Z,1513218988.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:28.188Z,1513218988.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:28.377Z,1513218988.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:28.428Z,1513218988.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:28.822Z,1513218988.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:28.886Z,1513218988.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:29.180Z,1513218989.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:29.229Z,1513218989.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:29.585Z,1513218989.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:29.613Z,1513218989.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:29.987Z,1513218989.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:30.015Z,1513218990.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:30.414Z,1513218990.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:30.428Z,1513218990.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:30.808Z,1513218990.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:30.824Z,1513218990.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:31.182Z,1513218991.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:31.227Z,1513218991.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:31.602Z,1513218991.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:31.655Z,1513218991.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:32.018Z,1513218992.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:32.047Z,1513218992.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:32.396Z,1513218992.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:32.426Z,1513218992.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:32.787Z,1513218992.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:32.832Z,1513218992.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:33.246Z,1513218993.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:33.357Z,1513218993.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:33.587Z,1513218993.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:33.615Z,1513218993.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:33.987Z,1513218993.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:34.031Z,1513218994.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:34.439Z,1513218994.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:34.471Z,1513218994.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:34.810Z,1513218994.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:34.858Z,1513218994.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:35.226Z,1513218995.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:35.275Z,1513218995.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:35.600Z,1513218995.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:35.667Z,1513218995.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:35.996Z,1513218995.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:36.044Z,1513218996.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:36.427Z,1513218996.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:36.532Z,1513218996.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:36.856Z,1513218996.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:36.933Z,1513218996.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:37.203Z,1513218997.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:37.252Z,1513218997.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:37.602Z,1513218997.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:37.632Z,1513218997.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:38.016Z,1513218998.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:38.032Z,1513218998.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:38.395Z,1513218998.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:38.436Z,1513218998.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:38.866Z,1513218998.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:38.907Z,1513218998.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:39.203Z,1513218999.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:39.252Z,1513218999.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:39.616Z,1513218999.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:39.664Z,1513218999.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:40.009Z,1513219000.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:40.112Z,1513219000.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:40.389Z,1513219000.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:40.403Z,1513219000.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:40.784Z,1513219000.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:40.899Z,1513219000.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:41.210Z,1513219001.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:41.224Z,1513219001.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:44.660Z,1513219004.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:44.704Z,1513219004.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:44.894Z,1513219004.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:44.975Z,1513219004.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:45.173Z,1513219005.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:45.207Z,1513219005.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:45.580Z,1513219005.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:45.599Z,1513219005.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:45.949Z,1513219005.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:45.989Z,1513219005.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:46.353Z,1513219006.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:46.376Z,1513219006.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:46.751Z,1513219006.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:46.766Z,1513219006.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:47.247Z,1513219007.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:47.267Z,1513219007.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:47.578Z,1513219007.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:47.607Z,1513219007.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:47.970Z,1513219007.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:47.998Z,1513219007.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:48.358Z,1513219008.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:48.373Z,1513219008.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:48.758Z,1513219008.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:48.773Z,1513219008.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:49.219Z,1513219009.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:49.243Z,1513219009.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:49.555Z,1513219009.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:49.587Z,1513219009.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:49.973Z,1513219009.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:49.995Z,1513219009.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:50.381Z,1513219010.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:50.395Z,1513219010.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:50.762Z,1513219010.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:50.856Z,1513219010.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:51.154Z,1513219011.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:51.176Z,1513219011.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:51.556Z,1513219011.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:51.583Z,1513219011.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:51.947Z,1513219011.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:51.974Z,1513219011.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:52.372Z,1513219012.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:52.387Z,1513219012.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:52.776Z,1513219012.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:52.867Z,1513219012.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:53.174Z,1513219013.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:53.190Z,1513219013.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:53.556Z,1513219013.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:53.583Z,1513219013.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:53.951Z,1513219013.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:53.987Z,1513219013.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:54.440Z,1513219014.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:54.467Z,1513219014.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:54.764Z,1513219014.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:54.847Z,1513219014.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:55.171Z,1513219015.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:55.202Z,1513219015.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:55.559Z,1513219015.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:55.574Z,1513219015.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:55.970Z,1513219015.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:56.001Z,1513219016.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:56.362Z,1513219016.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:56.377Z,1513219016.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:56.758Z,1513219016.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:56.773Z,1513219016.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:57.174Z,1513219017.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:57.189Z,1513219017.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:57.568Z,1513219017.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:57.582Z,1513219017.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:57.952Z,1513219017.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:57.987Z,1513219017.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:58.365Z,1513219018.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:58.394Z,1513219018.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:58.836Z,1513219018.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:58.939Z,1513219018.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:59.166Z,1513219019.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:59.194Z,1513219019.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:59.558Z,1513219019.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:59.572Z,1513219019.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:36:59.951Z,1513219019.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:36:59.967Z,1513219019.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:00.360Z,1513219020.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:00.394Z,1513219020.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:00.815Z,1513219020.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:00.857Z,1513219020.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:01.231Z,1513219021.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:01.264Z,1513219021.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:01.580Z,1513219021.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:01.595Z,1513219021.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:01.970Z,1513219021.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:01.999Z,1513219021.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:02.352Z,1513219022.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:02.394Z,1513219022.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:02.752Z,1513219022.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:02.788Z,1513219022.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:03.234Z,1513219023.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:03.302Z,1513219023.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:03.563Z,1513219023.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:03.595Z,1513219023.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:03.974Z,1513219023.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:04.018Z,1513219024.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:04.377Z,1513219024.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:04.409Z,1513219024.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:04.768Z,1513219024.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:04.899Z,1513219024.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:05.157Z,1513219025.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:05.184Z,1513219025.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:05.554Z,1513219025.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:05.613Z,1513219025.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:05.956Z,1513219025.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:05.984Z,1513219025.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:06.375Z,1513219026.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:06.431Z,1513219026.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:06.774Z,1513219026.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:06.862Z,1513219026.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:07.169Z,1513219027.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:07.224Z,1513219027.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:07.551Z,1513219027.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:07.588Z,1513219027.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:07.955Z,1513219027.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:07.981Z,1513219027.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:08.350Z,1513219028.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:08.385Z,1513219028.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:08.745Z,1513219028.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:08.760Z,1513219028.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:09.188Z,1513219029.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:09.205Z,1513219029.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:09.585Z,1513219029.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:09.607Z,1513219029.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:09.967Z,1513219029.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:09.998Z,1513219029.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:10.356Z,1513219030.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:10.423Z,1513219030.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:10.751Z,1513219030.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:10.787Z,1513219030.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:11.149Z,1513219031.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:11.164Z,1513219031.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:11.585Z,1513219031.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:11.609Z,1513219031.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:11.956Z,1513219031.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:11.990Z,1513219031.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:12.366Z,1513219032.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:12.396Z,1513219032.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:12.766Z,1513219032.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:12.793Z,1513219032.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:13.165Z,1513219033.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:13.186Z,1513219033.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:13.575Z,1513219033.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:13.607Z,1513219033.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:13.960Z,1513219033.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:13.983Z,1513219033.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:14.366Z,1513219034.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:14.382Z,1513219034.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:14.754Z,1513219034.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:14.808Z,1513219034.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:15.227Z,1513219035.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:15.263Z,1513219035.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:15.575Z,1513219035.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:15.590Z,1513219035.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:15.974Z,1513219035.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:15.995Z,1513219035.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:16.351Z,1513219036.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:16.390Z,1513219036.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:16.790Z,1513219036.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:16.812Z,1513219036.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:17.223Z,1513219037.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:17.258Z,1513219037.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:17.561Z,1513219037.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:17.576Z,1513219037.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:17.971Z,1513219037.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:17.991Z,1513219037.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:18.370Z,1513219038.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:18.391Z,1513219038.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:18.774Z,1513219038.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:18.825Z,1513219038.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:19.152Z,1513219039.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:19.167Z,1513219039.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:19.558Z,1513219039.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:19.581Z,1513219039.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:20.005Z,1513219040.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:20.057Z,1513219040.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:20.369Z,1513219040.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:20.400Z,1513219040.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:20.763Z,1513219040.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:20.856Z,1513219040.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:21.168Z,1513219041.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:21.206Z,1513219041.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:21.560Z,1513219041.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:21.599Z,1513219041.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:21.978Z,1513219041.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:22.000Z,1513219042.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:22.357Z,1513219042.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:22.396Z,1513219042.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:22.762Z,1513219042.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:22.777Z,1513219042.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:23.169Z,1513219043.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:23.211Z,1513219043.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:23.575Z,1513219043.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:23.591Z,1513219043.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:23.979Z,1513219043.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:23.995Z,1513219043.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:24.352Z,1513219044.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:24.389Z,1513219044.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:24.751Z,1513219044.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:24.774Z,1513219044.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:25.162Z,1513219045.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:25.179Z,1513219045.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:25.562Z,1513219045.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:25.577Z,1513219045.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:25.956Z,1513219045.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:25.976Z,1513219045.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:26.392Z,1513219046.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:26.429Z,1513219046.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:26.765Z,1513219046.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:26.819Z,1513219046.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:27.186Z,1513219047.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:27.243Z,1513219047.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:27.562Z,1513219047.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:27.578Z,1513219047.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:27.954Z,1513219047.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:28.010Z,1513219048.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:28.358Z,1513219048.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:28.389Z,1513219048.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:28.765Z,1513219048.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:28.822Z,1513219048.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:29.220Z,1513219049.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:29.255Z,1513219049.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:29.587Z,1513219049.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:29.615Z,1513219049.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:29.974Z,1513219049.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:29.999Z,1513219049.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:30.358Z,1513219050.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:30.374Z,1513219050.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:30.762Z,1513219050.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:30.776Z,1513219050.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:31.221Z,1513219051.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:31.256Z,1513219051.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:31.551Z,1513219051.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:31.587Z,1513219051.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:31.975Z,1513219051.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:31.990Z,1513219051.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:32.380Z,1513219052.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:32.394Z,1513219052.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:32.780Z,1513219052.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:32.868Z,1513219052.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:33.161Z,1513219053.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:33.183Z,1513219053.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:33.568Z,1513219053.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:33.582Z,1513219053.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:33.962Z,1513219053.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:33.981Z,1513219053.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:34.373Z,1513219054.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:34.387Z,1513219054.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:34.771Z,1513219054.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:34.863Z,1513219054.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:35.165Z,1513219055.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:35.204Z,1513219055.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:35.556Z,1513219055.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:35.583Z,1513219055.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:35.956Z,1513219055.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:35.983Z,1513219055.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:36.353Z,1513219056.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:36.395Z,1513219056.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:36.764Z,1513219056.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:36.778Z,1513219056.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:37.176Z,1513219057.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:37.226Z,1513219057.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:37.568Z,1513219057.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:37.607Z,1513219057.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:37.972Z,1513219057.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:37.996Z,1513219057.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:38.366Z,1513219058.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:38.382Z,1513219058.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:38.752Z,1513219058.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:38.784Z,1513219058.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:39.176Z,1513219059.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:39.230Z,1513219059.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:39.562Z,1513219059.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:39.583Z,1513219059.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:39.964Z,1513219059.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:39.980Z,1513219059.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:40.367Z,1513219060.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:40.401Z,1513219060.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:40.771Z,1513219060.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:40.786Z,1513219060.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:41.175Z,1513219061.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:41.191Z,1513219061.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:41.554Z,1513219061.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:41.588Z,1513219061.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:44.970Z,1513219064.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:44.985Z,1513219064.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:45.084Z,1513219065.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:45.184Z,1513219065.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:45.450Z,1513219065.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:45.464Z,1513219065.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:45.860Z,1513219065.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:45.875Z,1513219065.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:46.242Z,1513219066.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:46.275Z,1513219066.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:46.635Z,1513219066.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:46.671Z,1513219066.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:47.031Z,1513219067.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:47.067Z,1513219067.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:47.436Z,1513219067.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:47.463Z,1513219067.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:47.841Z,1513219067.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:47.863Z,1513219067.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:48.246Z,1513219068.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:48.261Z,1513219068.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:48.660Z,1513219068.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:48.695Z,1513219068.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:49.041Z,1513219069.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:49.063Z,1513219069.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:49.440Z,1513219069.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:49.526Z,1513219069.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:49.832Z,1513219069.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:49.867Z,1513219069.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:50.244Z,1513219070.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:50.259Z,1513219070.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:50.645Z,1513219070.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:50.698Z,1513219070.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:51.049Z,1513219071.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:51.071Z,1513219071.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:51.454Z,1513219071.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:51.510Z,1513219071.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:51.858Z,1513219071.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:51.872Z,1513219071.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:52.231Z,1513219072.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:52.266Z,1513219072.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:52.634Z,1513219072.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:52.666Z,1513219072.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:53.038Z,1513219073.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:53.065Z,1513219073.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:53.432Z,1513219073.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:53.470Z,1513219073.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:53.830Z,1513219073.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:53.875Z,1513219073.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:54.245Z,1513219074.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:54.273Z,1513219074.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:54.658Z,1513219074.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:54.673Z,1513219074.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:55.043Z,1513219075.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:55.083Z,1513219075.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:55.458Z,1513219075.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:55.473Z,1513219075.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:55.836Z,1513219075.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:55.874Z,1513219075.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:56.239Z,1513219076.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:56.276Z,1513219076.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:56.634Z,1513219076.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:56.648Z,1513219076.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:57.049Z,1513219077.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:57.074Z,1513219077.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:57.446Z,1513219077.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:57.460Z,1513219077.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:57.846Z,1513219077.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:57.860Z,1513219077.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:58.275Z,1513219078.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:58.299Z,1513219078.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:58.640Z,1513219078.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:58.663Z,1513219078.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:59.042Z,1513219079.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:59.064Z,1513219079.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:59.440Z,1513219079.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:59.463Z,1513219079.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:37:59.841Z,1513219079.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:37:59.892Z,1513219079.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:00.254Z,1513219080.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:00.275Z,1513219080.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:00.654Z,1513219080.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:00.675Z,1513219080.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:01.065Z,1513219081.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:01.099Z,1513219081.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:01.460Z,1513219081.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:01.496Z,1513219081.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:01.837Z,1513219081.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:01.859Z,1513219081.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:02.242Z,1513219082.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:02.256Z,1513219082.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:02.642Z,1513219082.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:02.658Z,1513219082.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:03.054Z,1513219083.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:03.068Z,1513219083.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:03.450Z,1513219083.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:03.479Z,1513219083.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:03.858Z,1513219083.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:03.874Z,1513219083.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:04.241Z,1513219084.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:04.259Z,1513219084.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:04.692Z,1513219084.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:04.751Z,1513219084.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:05.032Z,1513219085.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:05.079Z,1513219085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:05.433Z,1513219085.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:05.450Z,1513219085.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:05.839Z,1513219085.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:05.855Z,1513219085.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:06.246Z,1513219086.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:06.273Z,1513219086.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:06.659Z,1513219086.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:06.683Z,1513219086.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:07.049Z,1513219087.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:07.091Z,1513219087.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:07.440Z,1513219087.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:07.454Z,1513219087.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:07.836Z,1513219087.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:07.856Z,1513219087.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:08.239Z,1513219088.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:08.259Z,1513219088.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:08.644Z,1513219088.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:08.663Z,1513219088.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:09.062Z,1513219089.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:09.093Z,1513219089.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:09.457Z,1513219089.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:09.472Z,1513219089.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:09.850Z,1513219089.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:09.864Z,1513219089.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:10.243Z,1513219090.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:10.263Z,1513219090.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:10.639Z,1513219090.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:10.654Z,1513219090.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:11.082Z,1513219091.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:11.110Z,1513219091.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:11.459Z,1513219091.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:11.474Z,1513219091.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:11.839Z,1513219091.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:11.927Z,1513219091.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:12.242Z,1513219092.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:12.269Z,1513219092.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:12.650Z,1513219092.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:12.675Z,1513219092.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:13.048Z,1513219093.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:13.087Z,1513219093.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:13.439Z,1513219093.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:13.454Z,1513219093.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:13.840Z,1513219093.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:13.898Z,1513219093.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:14.246Z,1513219094.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:14.260Z,1513219094.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:14.639Z,1513219094.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:14.654Z,1513219094.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:15.048Z,1513219095.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:15.068Z,1513219095.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:15.449Z,1513219095.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:15.464Z,1513219095.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:15.850Z,1513219095.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:15.864Z,1513219095.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:16.243Z,1513219096.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:16.258Z,1513219096.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:16.639Z,1513219096.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:16.653Z,1513219096.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:17.031Z,1513219097.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:17.066Z,1513219097.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:17.463Z,1513219097.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:17.484Z,1513219097.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:17.831Z,1513219097.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:17.856Z,1513219097.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:18.255Z,1513219098.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:18.269Z,1513219098.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:18.652Z,1513219098.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:18.670Z,1513219098.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:19.051Z,1513219099.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:19.071Z,1513219099.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:19.431Z,1513219099.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:19.465Z,1513219099.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:19.836Z,1513219099.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:19.861Z,1513219099.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:20.231Z,1513219100.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:20.261Z,1513219100.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:20.667Z,1513219100.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:20.689Z,1513219100.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:21.053Z,1513219101.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:21.068Z,1513219101.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:21.446Z,1513219101.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:21.461Z,1513219101.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:21.854Z,1513219101.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:21.868Z,1513219101.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:22.240Z,1513219102.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:22.293Z,1513219102.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:22.639Z,1513219102.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:22.654Z,1513219102.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:23.040Z,1513219103.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:23.059Z,1513219103.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:23.440Z,1513219103.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:23.455Z,1513219103.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:23.841Z,1513219103.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:23.856Z,1513219103.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:24.246Z,1513219104.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:24.267Z,1513219104.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:24.650Z,1513219104.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:24.666Z,1513219104.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:25.045Z,1513219105.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:25.067Z,1513219105.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:25.440Z,1513219105.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:25.455Z,1513219105.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:25.843Z,1513219105.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:25.858Z,1513219105.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:26.244Z,1513219106.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:26.259Z,1513219106.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:26.637Z,1513219106.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:26.653Z,1513219106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:27.086Z,1513219107.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:27.107Z,1513219107.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:27.453Z,1513219107.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:27.474Z,1513219107.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:27.855Z,1513219107.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:27.869Z,1513219107.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:28.236Z,1513219108.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:28.267Z,1513219108.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:28.631Z,1513219108.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:28.668Z,1513219108.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:29.031Z,1513219109.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:29.068Z,1513219109.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:29.436Z,1513219109.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:29.466Z,1513219109.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:29.835Z,1513219109.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:29.871Z,1513219109.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:30.259Z,1513219110.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:30.274Z,1513219110.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:30.646Z,1513219110.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:30.673Z,1513219110.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:31.042Z,1513219111.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:31.071Z,1513219111.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:31.435Z,1513219111.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:31.472Z,1513219111.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:31.835Z,1513219111.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:31.870Z,1513219111.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:32.231Z,1513219112.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:32.267Z,1513219112.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:32.633Z,1513219112.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:32.647Z,1513219112.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:33.051Z,1513219113.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:33.074Z,1513219113.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:33.465Z,1513219113.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:33.493Z,1513219113.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:33.868Z,1513219113.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:33.883Z,1513219113.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:34.240Z,1513219114.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:34.295Z,1513219114.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:34.642Z,1513219114.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:34.695Z,1513219114.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:35.042Z,1513219115.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:35.059Z,1513219115.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:35.444Z,1513219115.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:35.460Z,1513219115.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:35.843Z,1513219115.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:35.898Z,1513219115.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:36.252Z,1513219116.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:36.271Z,1513219116.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:36.665Z,1513219116.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:36.738Z,1513219116.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:37.054Z,1513219117.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:37.068Z,1513219117.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:37.448Z,1513219117.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:37.462Z,1513219117.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:37.462Z,1513219117.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2017-12-14T02:38:37.462Z,1513219117.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:38:37.464Z,1513219117.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:37.464Z,1513219117.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2017-12-14T02:38:37.464Z,1513219117.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:38:37.466Z,1513219117.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:37.466Z,1513219117.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2017-12-14T02:38:37.466Z,1513219117.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:38:37.490Z,1513219117.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:38:37.490Z,1513219117.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:38:37.490Z,1513219117.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:38:37.834Z,1513219117.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:37.894Z,1513219117.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:38:37.894Z,1513219117.894 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2017-12-14T02:38:37.894Z,1513219117.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:38:37.894Z,1513219117.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2017-12-14T02:38:37.895Z,1513219117.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:38:37.895Z,1513219117.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2017-12-14T02:38:38.232Z,1513219118.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:38.267Z,1513219118.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:38:38.267Z,1513219118.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:38:38.267Z,1513219118.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:38:38.268Z,1513219118.268 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:38:38.268Z,1513219118.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:38:38.273Z,1513219118.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:38:38.273Z,1513219118.273 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:38:38.274Z,1513219118.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:38:38.274Z,1513219118.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:38:38.628Z,1513219118.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:38.655Z,1513219118.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:39.042Z,1513219119.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:39.068Z,1513219119.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:39.454Z,1513219119.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:39.486Z,1513219119.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:39.850Z,1513219119.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:39.879Z,1513219119.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:40.232Z,1513219120.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:40.266Z,1513219120.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:40.270Z,1513219120.270 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:38:40.270Z,1513219120.270 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:38:40.270Z,1513219120.270 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:38:40.270Z,1513219120.270 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:38:40.635Z,1513219120.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:40.662Z,1513219120.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:40.666Z,1513219120.666 [Default:CheckIn:D] Stopped
2017-12-14T02:38:40.666Z,1513219120.666 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:38:41.032Z,1513219121.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:41.067Z,1513219121.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:41.070Z,1513219121.070 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 125.421273 min 
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn:E] Stopped
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn] Stopped
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn](INFO): Running loop #13
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn] Running Loop=13
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:38:41.071Z,1513219121.071 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:38:41.444Z,1513219121.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:41.475Z,1513219121.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:41.841Z,1513219121.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:41.879Z,1513219121.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:45.331Z,1513219125.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:45.387Z,1513219125.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:45.504Z,1513219125.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:45.532Z,1513219125.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:45.853Z,1513219125.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:45.888Z,1513219125.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:46.261Z,1513219126.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:46.298Z,1513219126.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:46.645Z,1513219126.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:46.660Z,1513219126.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:47.044Z,1513219127.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:47.058Z,1513219127.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:47.449Z,1513219127.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:47.463Z,1513219127.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:47.844Z,1513219127.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:47.860Z,1513219127.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:48.245Z,1513219128.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:48.260Z,1513219128.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:48.650Z,1513219128.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:48.664Z,1513219128.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:49.046Z,1513219129.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:49.067Z,1513219129.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:49.447Z,1513219129.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:49.462Z,1513219129.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:49.847Z,1513219129.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:49.861Z,1513219129.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:50.242Z,1513219130.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:50.269Z,1513219130.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:50.644Z,1513219130.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:50.703Z,1513219130.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:51.057Z,1513219131.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:51.072Z,1513219131.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:51.461Z,1513219131.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:51.476Z,1513219131.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:51.859Z,1513219131.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:51.879Z,1513219131.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:52.229Z,1513219132.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:52.264Z,1513219132.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:52.647Z,1513219132.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:52.663Z,1513219132.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:53.035Z,1513219133.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:53.066Z,1513219133.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:53.477Z,1513219133.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:53.508Z,1513219133.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:53.835Z,1513219133.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:53.862Z,1513219133.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:54.251Z,1513219134.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:54.270Z,1513219134.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:54.656Z,1513219134.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:54.687Z,1513219134.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:55.060Z,1513219135.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:55.074Z,1513219135.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:55.447Z,1513219135.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:55.461Z,1513219135.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:55.847Z,1513219135.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:55.862Z,1513219135.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:56.248Z,1513219136.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:56.263Z,1513219136.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:56.699Z,1513219136.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:56.742Z,1513219136.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:57.050Z,1513219137.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:57.090Z,1513219137.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:57.454Z,1513219137.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:57.518Z,1513219137.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:57.858Z,1513219137.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:57.879Z,1513219137.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:58.249Z,1513219138.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:58.299Z,1513219138.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:58.638Z,1513219138.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:58.673Z,1513219138.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:59.043Z,1513219139.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:59.099Z,1513219139.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:59.444Z,1513219139.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:59.459Z,1513219139.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:38:59.844Z,1513219139.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:38:59.859Z,1513219139.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:00.254Z,1513219140.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:00.269Z,1513219140.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:00.651Z,1513219140.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:00.665Z,1513219140.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:00.678Z,1513219140.678 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:39:01.062Z,1513219141.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:01.076Z,1513219141.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:01.447Z,1513219141.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:01.462Z,1513219141.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:01.835Z,1513219141.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:01.860Z,1513219141.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:02.256Z,1513219142.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:02.270Z,1513219142.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:02.635Z,1513219142.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:02.666Z,1513219142.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:03.066Z,1513219143.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:03.092Z,1513219143.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:03.460Z,1513219143.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:03.475Z,1513219143.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:03.855Z,1513219143.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:03.874Z,1513219143.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:04.235Z,1513219144.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:04.261Z,1513219144.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:04.639Z,1513219144.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:04.670Z,1513219144.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:05.035Z,1513219145.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:05.073Z,1513219145.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:05.434Z,1513219145.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:05.448Z,1513219145.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:05.840Z,1513219145.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:05.876Z,1513219145.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:06.248Z,1513219146.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:06.295Z,1513219146.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:06.653Z,1513219146.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:06.687Z,1513219146.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:07.054Z,1513219147.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:07.085Z,1513219147.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:07.444Z,1513219147.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:07.501Z,1513219147.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:07.845Z,1513219147.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:07.859Z,1513219147.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:08.236Z,1513219148.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:08.263Z,1513219148.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:08.640Z,1513219148.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:08.666Z,1513219148.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:09.064Z,1513219149.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:09.079Z,1513219149.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:09.467Z,1513219149.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:09.492Z,1513219149.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:09.862Z,1513219149.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:09.876Z,1513219149.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:10.235Z,1513219150.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:10.269Z,1513219150.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:10.636Z,1513219150.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:10.651Z,1513219150.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:11.040Z,1513219151.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:11.073Z,1513219151.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:11.443Z,1513219151.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:11.458Z,1513219151.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:11.841Z,1513219151.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:11.855Z,1513219151.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:12.253Z,1513219152.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:12.283Z,1513219152.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:12.691Z,1513219152.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:12.729Z,1513219152.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:13.067Z,1513219153.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:13.096Z,1513219153.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:13.439Z,1513219153.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:13.466Z,1513219153.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:13.849Z,1513219153.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:13.864Z,1513219153.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:14.247Z,1513219154.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:14.262Z,1513219154.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:14.654Z,1513219154.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:14.669Z,1513219154.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:15.060Z,1513219155.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:15.083Z,1513219155.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:15.456Z,1513219155.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:15.479Z,1513219155.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:15.857Z,1513219155.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:15.880Z,1513219155.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:16.235Z,1513219156.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:16.269Z,1513219156.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:16.640Z,1513219156.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:16.667Z,1513219156.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:17.035Z,1513219157.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:17.067Z,1513219157.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:17.435Z,1513219157.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:17.459Z,1513219157.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:17.835Z,1513219157.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:17.851Z,1513219157.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:18.250Z,1513219158.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:18.303Z,1513219158.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:18.667Z,1513219158.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:18.681Z,1513219158.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:19.116Z,1513219159.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:19.146Z,1513219159.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:19.448Z,1513219159.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:19.523Z,1513219159.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:19.844Z,1513219159.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:19.859Z,1513219159.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:20.245Z,1513219160.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:20.260Z,1513219160.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:20.642Z,1513219160.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:20.695Z,1513219160.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:21.057Z,1513219161.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:21.086Z,1513219161.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:21.458Z,1513219161.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:21.503Z,1513219161.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:21.856Z,1513219161.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:21.888Z,1513219161.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:22.287Z,1513219162.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:22.340Z,1513219162.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:22.377Z,1513219162.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:22.638Z,1513219162.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:22.657Z,1513219162.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:23.042Z,1513219163.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:23.065Z,1513219163.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:23.180Z,1513219163.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:23.445Z,1513219163.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:23.459Z,1513219163.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:23.589Z,1513219163.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:23.835Z,1513219163.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:23.868Z,1513219163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:24.252Z,1513219164.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:24.268Z,1513219164.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:24.653Z,1513219164.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:24.667Z,1513219164.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:25.052Z,1513219165.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:25.075Z,1513219165.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:25.438Z,1513219165.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:25.484Z,1513219165.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:25.849Z,1513219165.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:25.864Z,1513219165.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:26.250Z,1513219166.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:26.265Z,1513219166.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:26.635Z,1513219166.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:26.663Z,1513219166.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:27.058Z,1513219167.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:27.072Z,1513219167.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:27.456Z,1513219167.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:27.471Z,1513219167.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:27.859Z,1513219167.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:27.874Z,1513219167.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:28.236Z,1513219168.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:28.262Z,1513219168.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:28.652Z,1513219168.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:28.684Z,1513219168.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:29.035Z,1513219169.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:29.073Z,1513219169.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:29.436Z,1513219169.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:29.470Z,1513219169.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:29.833Z,1513219169.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:29.876Z,1513219169.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:30.263Z,1513219170.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:30.283Z,1513219170.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:30.660Z,1513219170.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:30.682Z,1513219170.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:31.046Z,1513219171.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:31.074Z,1513219171.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:31.447Z,1513219171.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:31.473Z,1513219171.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:31.835Z,1513219171.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:31.865Z,1513219171.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:32.245Z,1513219172.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:32.260Z,1513219172.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:32.644Z,1513219172.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:32.659Z,1513219172.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:33.048Z,1513219173.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:33.064Z,1513219173.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:33.453Z,1513219173.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:33.468Z,1513219173.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:33.849Z,1513219173.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:33.864Z,1513219173.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:34.247Z,1513219174.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:34.262Z,1513219174.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:34.639Z,1513219174.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:34.659Z,1513219174.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:35.065Z,1513219175.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:35.101Z,1513219175.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:35.435Z,1513219175.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:35.476Z,1513219175.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:35.839Z,1513219175.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:35.864Z,1513219175.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:36.264Z,1513219176.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:36.287Z,1513219176.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:36.398Z,1513219176.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:36.659Z,1513219176.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:36.673Z,1513219176.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:37.066Z,1513219177.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:37.087Z,1513219177.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:37.194Z,1513219177.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:37.444Z,1513219177.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:37.459Z,1513219177.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:37.597Z,1513219177.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:37.843Z,1513219177.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:37.858Z,1513219177.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:38.240Z,1513219178.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:38.255Z,1513219178.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:38.635Z,1513219178.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:38.666Z,1513219178.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:39.056Z,1513219179.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:39.075Z,1513219179.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:39.465Z,1513219179.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:39.480Z,1513219179.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:39.860Z,1513219179.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:39.875Z,1513219179.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:40.239Z,1513219180.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:40.267Z,1513219180.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:40.639Z,1513219180.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:40.691Z,1513219180.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:41.035Z,1513219181.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:41.066Z,1513219181.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:41.516Z,1513219181.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:41.543Z,1513219181.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:41.836Z,1513219181.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:41.895Z,1513219181.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:45.331Z,1513219185.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:45.367Z,1513219185.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:45.465Z,1513219185.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:45.499Z,1513219185.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:45.849Z,1513219185.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:45.880Z,1513219185.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:46.243Z,1513219186.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:46.283Z,1513219186.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:46.635Z,1513219186.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:46.667Z,1513219186.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:47.037Z,1513219187.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:47.086Z,1513219187.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:47.436Z,1513219187.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:47.451Z,1513219187.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:47.831Z,1513219187.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:47.846Z,1513219187.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:48.275Z,1513219188.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:48.291Z,1513219188.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:48.653Z,1513219188.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:48.677Z,1513219188.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:49.046Z,1513219189.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:49.076Z,1513219189.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:49.442Z,1513219189.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:49.456Z,1513219189.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:49.837Z,1513219189.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:49.852Z,1513219189.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:50.237Z,1513219190.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:50.252Z,1513219190.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:50.374Z,1513219190.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:50.642Z,1513219190.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:50.657Z,1513219190.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:51.083Z,1513219191.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:51.170Z,1513219191.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:51.207Z,1513219191.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:51.446Z,1513219191.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:51.461Z,1513219191.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:51.593Z,1513219191.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:51.846Z,1513219191.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:51.867Z,1513219191.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:52.239Z,1513219192.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:52.265Z,1513219192.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:52.389Z,1513219192.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:52.636Z,1513219192.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:52.663Z,1513219192.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:53.051Z,1513219193.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:53.080Z,1513219193.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:53.185Z,1513219193.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:53.432Z,1513219193.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:53.451Z,1513219193.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:53.589Z,1513219193.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:53.828Z,1513219193.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:53.855Z,1513219193.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:54.247Z,1513219194.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:54.274Z,1513219194.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:54.655Z,1513219194.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:54.669Z,1513219194.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:55.052Z,1513219195.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:55.066Z,1513219195.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:55.435Z,1513219195.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:55.491Z,1513219195.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:55.842Z,1513219195.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:55.858Z,1513219195.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:56.242Z,1513219196.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:56.259Z,1513219196.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:56.641Z,1513219196.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:56.658Z,1513219196.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:57.050Z,1513219197.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:57.066Z,1513219197.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:57.508Z,1513219197.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:57.547Z,1513219197.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:57.854Z,1513219197.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:57.888Z,1513219197.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:58.243Z,1513219198.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:58.282Z,1513219198.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:58.633Z,1513219198.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:58.648Z,1513219198.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:59.040Z,1513219199.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:59.055Z,1513219199.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:59.444Z,1513219199.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:59.460Z,1513219199.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:39:59.828Z,1513219199.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:39:59.854Z,1513219199.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:00.249Z,1513219200.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:00.277Z,1513219200.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:00.649Z,1513219200.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:00.691Z,1513219200.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:01.062Z,1513219201.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:01.080Z,1513219201.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:01.435Z,1513219201.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:01.461Z,1513219201.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:01.831Z,1513219201.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:01.859Z,1513219201.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:02.236Z,1513219202.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:02.262Z,1513219202.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:02.631Z,1513219202.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:02.663Z,1513219202.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:03.052Z,1513219203.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:03.071Z,1513219203.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:03.457Z,1513219203.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:03.487Z,1513219203.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:03.886Z,1513219203.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:03.934Z,1513219203.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:04.243Z,1513219204.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:04.258Z,1513219204.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:04.378Z,1513219204.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:04.639Z,1513219204.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:04.659Z,1513219204.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:05.037Z,1513219205.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:05.051Z,1513219205.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:05.175Z,1513219205.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:05.442Z,1513219205.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:05.457Z,1513219205.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:05.581Z,1513219205.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:05.837Z,1513219205.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:05.851Z,1513219205.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:06.245Z,1513219206.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:06.303Z,1513219206.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:06.378Z,1513219206.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:06.654Z,1513219206.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:06.685Z,1513219206.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:07.052Z,1513219207.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:07.087Z,1513219207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:07.174Z,1513219207.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:07.444Z,1513219207.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:07.510Z,1513219207.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:07.577Z,1513219207.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:07.842Z,1513219207.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:07.856Z,1513219207.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:08.244Z,1513219208.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:08.263Z,1513219208.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:08.639Z,1513219208.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:08.703Z,1513219208.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:09.048Z,1513219209.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:09.063Z,1513219209.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:09.449Z,1513219209.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:09.495Z,1513219209.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:09.849Z,1513219209.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:09.870Z,1513219209.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:10.293Z,1513219210.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:10.340Z,1513219210.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:10.640Z,1513219210.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:10.655Z,1513219210.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:11.038Z,1513219211.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:11.060Z,1513219211.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:11.446Z,1513219211.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:11.460Z,1513219211.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:11.844Z,1513219211.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:11.859Z,1513219211.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:12.249Z,1513219212.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:12.263Z,1513219212.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:12.650Z,1513219212.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:12.664Z,1513219212.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:13.046Z,1513219213.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:13.071Z,1513219213.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:13.449Z,1513219213.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:13.476Z,1513219213.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:13.831Z,1513219213.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:13.865Z,1513219213.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:14.236Z,1513219214.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:14.261Z,1513219214.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:14.631Z,1513219214.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:14.656Z,1513219214.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:15.055Z,1513219215.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:15.069Z,1513219215.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:15.455Z,1513219215.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:15.469Z,1513219215.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:15.854Z,1513219215.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:15.868Z,1513219215.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:16.235Z,1513219216.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:16.261Z,1513219216.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:16.675Z,1513219216.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:16.711Z,1513219216.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:17.031Z,1513219217.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:17.063Z,1513219217.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:17.439Z,1513219217.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:17.471Z,1513219217.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:17.831Z,1513219217.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:17.883Z,1513219217.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:18.256Z,1513219218.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:18.270Z,1513219218.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:18.369Z,1513219218.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:18.659Z,1513219218.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:18.679Z,1513219218.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:19.054Z,1513219219.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:19.068Z,1513219219.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:19.167Z,1513219219.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:19.437Z,1513219219.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:19.470Z,1513219219.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:19.593Z,1513219219.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:19.864Z,1513219219.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:19.912Z,1513219219.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:20.236Z,1513219220.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:20.252Z,1513219220.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:20.390Z,1513219220.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:20.637Z,1513219220.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:20.651Z,1513219220.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:21.050Z,1513219221.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:21.074Z,1513219221.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:21.186Z,1513219221.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:21.450Z,1513219221.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:21.473Z,1513219221.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:21.589Z,1513219221.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:21.853Z,1513219221.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:21.874Z,1513219221.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:22.240Z,1513219222.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:22.255Z,1513219222.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:22.632Z,1513219222.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:22.648Z,1513219222.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:23.096Z,1513219223.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:23.138Z,1513219223.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:23.436Z,1513219223.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:23.464Z,1513219223.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:23.841Z,1513219223.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:23.856Z,1513219223.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:24.253Z,1513219224.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:24.268Z,1513219224.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:24.654Z,1513219224.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:24.668Z,1513219224.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:25.043Z,1513219225.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:25.057Z,1513219225.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:25.447Z,1513219225.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:25.464Z,1513219225.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:25.838Z,1513219225.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:25.865Z,1513219225.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:26.262Z,1513219226.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:26.291Z,1513219226.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:26.640Z,1513219226.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:26.655Z,1513219226.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:27.057Z,1513219227.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:27.072Z,1513219227.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:27.454Z,1513219227.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:27.469Z,1513219227.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:27.844Z,1513219227.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:27.871Z,1513219227.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:28.235Z,1513219228.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:28.263Z,1513219228.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:28.635Z,1513219228.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:28.703Z,1513219228.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:29.031Z,1513219229.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:29.065Z,1513219229.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:29.465Z,1513219229.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:29.511Z,1513219229.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:29.831Z,1513219229.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:29.858Z,1513219229.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:30.241Z,1513219230.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:30.275Z,1513219230.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:30.659Z,1513219230.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:30.674Z,1513219230.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:31.046Z,1513219231.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:31.079Z,1513219231.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:31.440Z,1513219231.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:31.455Z,1513219231.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:31.839Z,1513219231.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:31.855Z,1513219231.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:32.232Z,1513219232.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:32.247Z,1513219232.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:32.374Z,1513219232.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:32.696Z,1513219232.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:32.733Z,1513219232.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:33.058Z,1513219233.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:33.066Z,1513219233.066 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:40:33.067Z,1513219233.067 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:40:33.067Z,1513219233.067 [BPC1](ERROR): Communications Fault
2017-12-14T02:40:33.075Z,1513219233.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:33.113Z,1513219233.113 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:40:33.171Z,1513219233.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:33.471Z,1513219233.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:33.491Z,1513219233.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:33.601Z,1513219233.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:33.862Z,1513219233.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:33.883Z,1513219233.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:34.236Z,1513219234.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:34.271Z,1513219234.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:34.285Z,1513219234.285 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:40:34.285Z,1513219234.285 [BPC1] No Fault, FailCount= 1
2017-12-14T02:40:34.400Z,1513219234.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:34.632Z,1513219234.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:34.715Z,1513219234.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:35.032Z,1513219235.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:35.067Z,1513219235.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:35.200Z,1513219235.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:35.432Z,1513219235.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:35.467Z,1513219235.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:35.605Z,1513219235.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:35.875Z,1513219235.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:35.952Z,1513219235.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:36.252Z,1513219236.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:36.283Z,1513219236.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:36.662Z,1513219236.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:36.678Z,1513219236.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:37.050Z,1513219237.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:37.079Z,1513219237.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:37.437Z,1513219237.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:37.452Z,1513219237.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:37.837Z,1513219237.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:37.851Z,1513219237.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:38.241Z,1513219238.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:38.256Z,1513219238.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:38.639Z,1513219238.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:38.655Z,1513219238.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:39.053Z,1513219239.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:39.116Z,1513219239.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:39.449Z,1513219239.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:39.472Z,1513219239.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:39.850Z,1513219239.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:39.879Z,1513219239.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:40.228Z,1513219240.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:40.243Z,1513219240.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:40.639Z,1513219240.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:40.675Z,1513219240.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:41.037Z,1513219241.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:41.070Z,1513219241.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:41.436Z,1513219241.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:41.450Z,1513219241.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:41.838Z,1513219241.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:41.853Z,1513219241.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:42.222Z,1513219242.222 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T02:40:42.222Z,1513219242.222 [NAL9602] Data Fault, FailCount= 2
2017-12-14T02:40:42.222Z,1513219242.222 [NAL9602](ERROR): Data Fault
2017-12-14T02:40:42.240Z,1513219242.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:42.320Z,1513219242.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:42.348Z,1513219242.348 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T02:40:45.704Z,1513219245.704 [NAL9602](INFO): Powering down
2017-12-14T02:40:45.739Z,1513219245.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:45.790Z,1513219245.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:45.892Z,1513219245.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:45.934Z,1513219245.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:46.248Z,1513219246.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:46.263Z,1513219246.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:46.308Z,1513219246.308 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T02:40:46.308Z,1513219246.308 [NAL9602] No Fault, FailCount= 2
2017-12-14T02:40:46.652Z,1513219246.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:46.667Z,1513219246.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:47.050Z,1513219247.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:47.065Z,1513219247.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:47.446Z,1513219247.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:47.461Z,1513219247.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:47.847Z,1513219247.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:47.862Z,1513219247.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:48.240Z,1513219248.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:48.255Z,1513219248.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:48.386Z,1513219248.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:48.688Z,1513219248.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:48.751Z,1513219248.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:49.038Z,1513219249.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:49.072Z,1513219249.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:49.182Z,1513219249.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:49.456Z,1513219249.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:49.470Z,1513219249.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:49.585Z,1513219249.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:49.860Z,1513219249.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:49.875Z,1513219249.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:50.242Z,1513219250.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:50.269Z,1513219250.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:50.642Z,1513219250.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:50.668Z,1513219250.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:51.038Z,1513219251.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:51.071Z,1513219251.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:51.439Z,1513219251.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:51.471Z,1513219251.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:51.842Z,1513219251.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:51.869Z,1513219251.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:52.239Z,1513219252.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:52.275Z,1513219252.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:52.642Z,1513219252.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:52.675Z,1513219252.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:53.039Z,1513219253.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:53.071Z,1513219253.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:53.439Z,1513219253.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:53.469Z,1513219253.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:53.842Z,1513219253.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:53.875Z,1513219253.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:54.242Z,1513219254.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:54.269Z,1513219254.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:54.639Z,1513219254.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:54.671Z,1513219254.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:55.089Z,1513219255.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:55.127Z,1513219255.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:55.438Z,1513219255.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:55.471Z,1513219255.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:55.838Z,1513219255.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:55.853Z,1513219255.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:56.242Z,1513219256.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:56.284Z,1513219256.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:56.642Z,1513219256.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:56.715Z,1513219256.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:57.044Z,1513219257.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:57.059Z,1513219257.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:57.444Z,1513219257.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:57.499Z,1513219257.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:57.846Z,1513219257.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:57.861Z,1513219257.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:58.281Z,1513219258.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:58.343Z,1513219258.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:58.648Z,1513219258.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:58.662Z,1513219258.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:59.048Z,1513219259.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:59.063Z,1513219259.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:59.445Z,1513219259.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:59.472Z,1513219259.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:40:59.848Z,1513219259.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:40:59.863Z,1513219259.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:00.244Z,1513219260.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:00.259Z,1513219260.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:00.648Z,1513219260.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:00.662Z,1513219260.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:01.044Z,1513219261.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:01.071Z,1513219261.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:01.479Z,1513219261.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:01.518Z,1513219261.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:01.848Z,1513219261.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:01.867Z,1513219261.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:02.249Z,1513219262.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:02.264Z,1513219262.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:02.644Z,1513219262.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:02.659Z,1513219262.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:03.046Z,1513219263.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:03.067Z,1513219263.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:03.449Z,1513219263.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:03.464Z,1513219263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:03.851Z,1513219263.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:03.866Z,1513219263.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:04.250Z,1513219264.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:04.264Z,1513219264.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:04.677Z,1513219264.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:04.707Z,1513219264.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:05.038Z,1513219265.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:05.079Z,1513219265.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:05.446Z,1513219265.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:05.483Z,1513219265.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:05.843Z,1513219265.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:05.879Z,1513219265.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:06.246Z,1513219266.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:06.261Z,1513219266.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:06.644Z,1513219266.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:06.689Z,1513219266.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:07.048Z,1513219267.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:07.064Z,1513219267.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:07.444Z,1513219267.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:07.459Z,1513219267.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:07.843Z,1513219267.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:07.870Z,1513219267.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:08.250Z,1513219268.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:08.265Z,1513219268.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:08.650Z,1513219268.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:08.664Z,1513219268.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:09.050Z,1513219269.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:09.064Z,1513219269.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:09.445Z,1513219269.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:09.461Z,1513219269.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:09.847Z,1513219269.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:09.862Z,1513219269.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:10.252Z,1513219270.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:10.267Z,1513219270.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:10.642Z,1513219270.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:10.673Z,1513219270.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:11.088Z,1513219271.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:11.116Z,1513219271.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:11.455Z,1513219271.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:11.469Z,1513219271.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:11.840Z,1513219271.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:11.874Z,1513219271.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:12.252Z,1513219272.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:12.268Z,1513219272.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:12.650Z,1513219272.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:12.664Z,1513219272.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:13.055Z,1513219273.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:13.075Z,1513219273.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:13.439Z,1513219273.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:13.482Z,1513219273.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:13.843Z,1513219273.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:13.882Z,1513219273.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:14.251Z,1513219274.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:14.287Z,1513219274.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:14.644Z,1513219274.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:14.672Z,1513219274.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:15.048Z,1513219275.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:15.063Z,1513219275.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:15.447Z,1513219275.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:15.468Z,1513219275.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:15.832Z,1513219275.832 [NAL9602](INFO): Powering up NAL9602
2017-12-14T02:41:15.850Z,1513219275.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:15.866Z,1513219275.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:16.251Z,1513219276.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:16.266Z,1513219276.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:16.653Z,1513219276.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:16.668Z,1513219276.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:17.047Z,1513219277.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:17.063Z,1513219277.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:17.471Z,1513219277.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:17.547Z,1513219277.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:17.838Z,1513219277.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:17.901Z,1513219277.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:18.242Z,1513219278.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:18.268Z,1513219278.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:18.639Z,1513219278.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:18.670Z,1513219278.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:19.039Z,1513219279.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:19.091Z,1513219279.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:19.443Z,1513219279.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:19.468Z,1513219279.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:19.846Z,1513219279.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:19.896Z,1513219279.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:20.236Z,1513219280.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:20.270Z,1513219280.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:20.671Z,1513219280.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:20.699Z,1513219280.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:21.047Z,1513219281.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:21.061Z,1513219281.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:21.449Z,1513219281.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:21.463Z,1513219281.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:21.843Z,1513219281.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:21.858Z,1513219281.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:22.244Z,1513219282.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:22.258Z,1513219282.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:22.648Z,1513219282.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:22.662Z,1513219282.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:23.048Z,1513219283.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:23.063Z,1513219283.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:23.444Z,1513219283.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:23.479Z,1513219283.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:23.846Z,1513219283.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:23.890Z,1513219283.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:24.248Z,1513219284.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:24.264Z,1513219284.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:24.647Z,1513219284.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:24.670Z,1513219284.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:25.040Z,1513219285.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:25.077Z,1513219285.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:25.467Z,1513219285.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:25.514Z,1513219285.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:25.842Z,1513219285.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:25.890Z,1513219285.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:26.240Z,1513219286.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:26.307Z,1513219286.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:26.655Z,1513219286.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:26.687Z,1513219286.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:27.022Z,1513219287.022 [NAL9602](INFO): NAL9602 initialized
2017-12-14T02:41:27.040Z,1513219287.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:27.075Z,1513219287.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:27.447Z,1513219287.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:27.482Z,1513219287.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:27.876Z,1513219287.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:27.895Z,1513219287.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:28.265Z,1513219288.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:28.323Z,1513219288.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:28.652Z,1513219288.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:28.731Z,1513219288.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:29.041Z,1513219289.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:29.087Z,1513219289.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:29.463Z,1513219289.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:29.502Z,1513219289.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:29.849Z,1513219289.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:29.864Z,1513219289.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:30.260Z,1513219290.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:30.279Z,1513219290.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:30.687Z,1513219290.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:30.732Z,1513219290.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:31.064Z,1513219291.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:31.099Z,1513219291.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:31.440Z,1513219291.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:31.467Z,1513219291.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:31.851Z,1513219291.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:31.866Z,1513219291.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:32.240Z,1513219292.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:32.285Z,1513219292.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:32.640Z,1513219292.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:32.668Z,1513219292.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:33.053Z,1513219293.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:33.071Z,1513219293.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:33.466Z,1513219293.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:33.488Z,1513219293.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:33.875Z,1513219293.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:33.898Z,1513219293.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:34.249Z,1513219294.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:34.278Z,1513219294.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:34.641Z,1513219294.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:34.688Z,1513219294.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:35.041Z,1513219295.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:35.083Z,1513219295.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:35.450Z,1513219295.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:35.491Z,1513219295.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:35.860Z,1513219295.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:35.896Z,1513219295.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:36.283Z,1513219296.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:36.312Z,1513219296.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:36.678Z,1513219296.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:36.706Z,1513219296.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:37.055Z,1513219297.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:37.090Z,1513219297.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:37.459Z,1513219297.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:37.494Z,1513219297.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:37.866Z,1513219297.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:37.899Z,1513219297.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:38.247Z,1513219298.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:38.275Z,1513219298.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:38.275Z,1513219298.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2017-12-14T02:41:38.275Z,1513219298.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:41:38.305Z,1513219298.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:38.305Z,1513219298.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2017-12-14T02:41:38.305Z,1513219298.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:41:38.307Z,1513219298.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:38.307Z,1513219298.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2017-12-14T02:41:38.307Z,1513219298.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:41:38.372Z,1513219298.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:41:38.372Z,1513219298.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:41:38.372Z,1513219298.372 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:41:38.659Z,1513219298.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:38.758Z,1513219298.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:41:38.758Z,1513219298.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2017-12-14T02:41:38.759Z,1513219298.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:41:38.759Z,1513219298.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2017-12-14T02:41:38.759Z,1513219298.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:41:38.759Z,1513219298.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2017-12-14T02:41:39.048Z,1513219299.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:39.086Z,1513219299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:41:39.086Z,1513219299.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:41:39.087Z,1513219299.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:41:39.087Z,1513219299.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:41:39.087Z,1513219299.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:41:39.088Z,1513219299.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:41:39.088Z,1513219299.088 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:41:39.101Z,1513219299.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:41:39.101Z,1513219299.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:41:39.455Z,1513219299.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:39.527Z,1513219299.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:39.889Z,1513219299.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:39.928Z,1513219299.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:40.251Z,1513219300.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:40.403Z,1513219300.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:40.643Z,1513219300.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:40.674Z,1513219300.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:41.041Z,1513219301.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:41.079Z,1513219301.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:41.452Z,1513219301.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:41.524Z,1513219301.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:41.850Z,1513219301.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:41.906Z,1513219301.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:42.257Z,1513219302.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:42.341Z,1513219302.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:46.457Z,1513219306.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:46.480Z,1513219306.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:46.599Z,1513219306.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:46.614Z,1513219306.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:46.943Z,1513219306.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:46.995Z,1513219306.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:47.346Z,1513219307.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:47.362Z,1513219307.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:47.732Z,1513219307.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:47.758Z,1513219307.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:48.148Z,1513219308.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:48.163Z,1513219308.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:48.546Z,1513219308.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:48.560Z,1513219308.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:48.946Z,1513219308.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:48.960Z,1513219308.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:49.335Z,1513219309.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:49.366Z,1513219309.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:49.743Z,1513219309.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:49.759Z,1513219309.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:50.144Z,1513219310.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:50.192Z,1513219310.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:50.541Z,1513219310.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:50.595Z,1513219310.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:50.944Z,1513219310.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:50.958Z,1513219310.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:51.351Z,1513219311.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:51.371Z,1513219311.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:51.754Z,1513219311.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:51.768Z,1513219311.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:52.154Z,1513219312.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:52.168Z,1513219312.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:52.543Z,1513219312.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:52.558Z,1513219312.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:52.940Z,1513219312.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:52.970Z,1513219312.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:53.369Z,1513219313.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:53.404Z,1513219313.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:53.731Z,1513219313.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:53.767Z,1513219313.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:54.158Z,1513219314.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:54.172Z,1513219314.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:54.556Z,1513219314.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:54.570Z,1513219314.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:54.946Z,1513219314.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:54.972Z,1513219314.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:55.331Z,1513219315.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:55.362Z,1513219315.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:55.736Z,1513219315.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:55.762Z,1513219315.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:56.133Z,1513219316.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:56.163Z,1513219316.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:56.555Z,1513219316.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:56.585Z,1513219316.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:56.936Z,1513219316.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:56.951Z,1513219316.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:57.348Z,1513219317.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:57.371Z,1513219317.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:57.760Z,1513219317.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:57.779Z,1513219317.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:58.149Z,1513219318.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:58.172Z,1513219318.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:58.537Z,1513219318.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:58.551Z,1513219318.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:58.945Z,1513219318.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:58.979Z,1513219318.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:59.343Z,1513219319.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:59.375Z,1513219319.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:41:59.784Z,1513219319.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:41:59.807Z,1513219319.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:00.149Z,1513219320.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:00.178Z,1513219320.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:00.546Z,1513219320.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:00.576Z,1513219320.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:00.946Z,1513219320.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:00.969Z,1513219320.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:01.340Z,1513219321.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:01.391Z,1513219321.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:01.740Z,1513219321.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:01.763Z,1513219321.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:02.153Z,1513219322.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:02.185Z,1513219322.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:02.544Z,1513219322.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:02.612Z,1513219322.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:02.953Z,1513219322.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:03.045Z,1513219323.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:03.355Z,1513219323.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:03.370Z,1513219323.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:03.754Z,1513219323.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:03.792Z,1513219323.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:04.142Z,1513219324.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:04.183Z,1513219324.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:04.535Z,1513219324.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:04.590Z,1513219324.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:04.940Z,1513219324.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:04.966Z,1513219324.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:05.337Z,1513219325.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:05.368Z,1513219325.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:05.735Z,1513219325.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:05.776Z,1513219325.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:06.179Z,1513219326.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:06.219Z,1513219326.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:06.555Z,1513219326.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:06.575Z,1513219326.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:06.944Z,1513219326.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:06.975Z,1513219326.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:07.331Z,1513219327.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:07.347Z,1513219327.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:07.742Z,1513219327.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:07.769Z,1513219327.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:08.141Z,1513219328.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:08.156Z,1513219328.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:08.537Z,1513219328.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:08.553Z,1513219328.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:08.945Z,1513219328.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:08.978Z,1513219328.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:09.351Z,1513219329.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:09.387Z,1513219329.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:09.818Z,1513219329.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:09.874Z,1513219329.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:10.164Z,1513219330.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:10.179Z,1513219330.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:10.545Z,1513219330.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:10.564Z,1513219330.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:10.947Z,1513219330.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:10.964Z,1513219330.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:11.340Z,1513219331.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:11.355Z,1513219331.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:11.736Z,1513219331.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:11.766Z,1513219331.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:12.147Z,1513219332.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:12.162Z,1513219332.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:12.546Z,1513219332.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:12.612Z,1513219332.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:12.947Z,1513219332.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:13.016Z,1513219333.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:13.338Z,1513219333.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:13.375Z,1513219333.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:13.743Z,1513219333.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:13.778Z,1513219333.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:14.138Z,1513219334.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:14.154Z,1513219334.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:14.536Z,1513219334.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:14.550Z,1513219334.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:14.943Z,1513219334.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:14.958Z,1513219334.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:15.340Z,1513219335.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:15.363Z,1513219335.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:15.785Z,1513219335.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:15.846Z,1513219335.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:16.143Z,1513219336.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:16.163Z,1513219336.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:16.546Z,1513219336.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:16.575Z,1513219336.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:16.949Z,1513219336.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:16.964Z,1513219336.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:17.343Z,1513219337.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:17.363Z,1513219337.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:17.744Z,1513219337.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:17.760Z,1513219337.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:18.152Z,1513219338.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:18.168Z,1513219338.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:18.551Z,1513219338.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:18.571Z,1513219338.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:18.981Z,1513219338.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:19.015Z,1513219339.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:19.343Z,1513219339.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:19.359Z,1513219339.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:19.739Z,1513219339.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:19.774Z,1513219339.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:20.165Z,1513219340.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:20.192Z,1513219340.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:20.534Z,1513219340.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:20.563Z,1513219340.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:20.948Z,1513219340.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:20.967Z,1513219340.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:21.351Z,1513219341.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:21.383Z,1513219341.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:21.756Z,1513219341.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:21.775Z,1513219341.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:22.158Z,1513219342.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:22.173Z,1513219342.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:22.531Z,1513219342.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:22.564Z,1513219342.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:22.931Z,1513219342.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:22.962Z,1513219342.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:23.338Z,1513219343.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:23.366Z,1513219343.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:23.732Z,1513219343.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:23.787Z,1513219343.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:24.164Z,1513219344.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:24.218Z,1513219344.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:24.553Z,1513219344.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:24.568Z,1513219344.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:24.954Z,1513219344.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:24.971Z,1513219344.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:25.332Z,1513219345.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:25.431Z,1513219345.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:25.737Z,1513219345.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:25.752Z,1513219345.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:26.132Z,1513219346.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:26.194Z,1513219346.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:26.534Z,1513219346.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:26.548Z,1513219346.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:26.936Z,1513219346.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:26.984Z,1513219346.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:27.350Z,1513219347.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:27.376Z,1513219347.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:27.747Z,1513219347.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:27.776Z,1513219347.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:28.136Z,1513219348.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:28.150Z,1513219348.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:28.537Z,1513219348.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:28.585Z,1513219348.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:28.936Z,1513219348.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:28.951Z,1513219348.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:29.340Z,1513219349.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:29.372Z,1513219349.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:29.736Z,1513219349.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:29.751Z,1513219349.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:30.149Z,1513219350.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:30.174Z,1513219350.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:30.545Z,1513219350.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:30.578Z,1513219350.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:30.945Z,1513219350.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:30.976Z,1513219350.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:31.346Z,1513219351.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:31.371Z,1513219351.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:31.787Z,1513219351.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:31.843Z,1513219351.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:32.139Z,1513219352.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:32.155Z,1513219352.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:32.546Z,1513219352.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:32.567Z,1513219352.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:32.942Z,1513219352.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:32.956Z,1513219352.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:33.354Z,1513219353.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:33.368Z,1513219353.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:33.746Z,1513219353.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:33.767Z,1513219353.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:34.151Z,1513219354.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:34.165Z,1513219354.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:34.545Z,1513219354.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:34.561Z,1513219354.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:34.962Z,1513219354.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:35.016Z,1513219355.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:35.345Z,1513219355.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:35.367Z,1513219355.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:35.748Z,1513219355.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:35.785Z,1513219355.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:36.150Z,1513219356.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:36.165Z,1513219356.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:36.550Z,1513219356.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:36.564Z,1513219356.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:36.948Z,1513219356.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:36.971Z,1513219356.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:37.354Z,1513219357.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:37.368Z,1513219357.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:37.742Z,1513219357.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:37.757Z,1513219357.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:38.168Z,1513219358.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:38.207Z,1513219358.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:38.541Z,1513219358.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:38.556Z,1513219358.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:38.921Z,1513219358.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:38.964Z,1513219358.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:39.354Z,1513219359.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:39.370Z,1513219359.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:39.752Z,1513219359.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:39.767Z,1513219359.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:40.154Z,1513219360.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:40.169Z,1513219360.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:40.543Z,1513219360.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:40.563Z,1513219360.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:40.943Z,1513219360.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:40.963Z,1513219360.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:41.366Z,1513219361.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:41.411Z,1513219361.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:41.732Z,1513219361.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:41.758Z,1513219361.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:42.153Z,1513219362.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:42.168Z,1513219362.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:42.552Z,1513219362.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:42.571Z,1513219362.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:46.051Z,1513219366.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:46.119Z,1513219366.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:46.223Z,1513219366.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:46.262Z,1513219366.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:46.631Z,1513219366.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:46.676Z,1513219366.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:47.031Z,1513219367.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:47.047Z,1513219367.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:47.432Z,1513219367.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:47.451Z,1513219367.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:47.829Z,1513219367.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:47.875Z,1513219367.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:48.242Z,1513219368.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:48.265Z,1513219368.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:48.645Z,1513219368.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:48.701Z,1513219368.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:49.052Z,1513219369.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:49.071Z,1513219369.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:49.431Z,1513219369.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:49.462Z,1513219369.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:49.827Z,1513219369.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:49.862Z,1513219369.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:50.227Z,1513219370.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:50.258Z,1513219370.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:50.632Z,1513219370.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:50.667Z,1513219370.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:51.035Z,1513219371.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:51.089Z,1513219371.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:51.451Z,1513219371.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:51.479Z,1513219371.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:51.845Z,1513219371.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:51.872Z,1513219371.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:52.245Z,1513219372.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:52.260Z,1513219372.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:52.628Z,1513219372.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:52.643Z,1513219372.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:53.027Z,1513219373.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:53.061Z,1513219373.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:53.450Z,1513219373.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:53.464Z,1513219373.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:53.842Z,1513219373.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:53.857Z,1513219373.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:54.246Z,1513219374.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:54.262Z,1513219374.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:54.652Z,1513219374.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:54.666Z,1513219374.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:55.051Z,1513219375.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:55.066Z,1513219375.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:55.428Z,1513219375.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:55.455Z,1513219375.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:55.827Z,1513219375.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:55.853Z,1513219375.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:56.240Z,1513219376.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:56.256Z,1513219376.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:56.628Z,1513219376.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:56.659Z,1513219376.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:57.027Z,1513219377.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:57.089Z,1513219377.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:57.456Z,1513219377.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:57.476Z,1513219377.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:57.851Z,1513219377.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:57.866Z,1513219377.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:58.242Z,1513219378.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:58.274Z,1513219378.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:58.627Z,1513219378.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:58.660Z,1513219378.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:59.027Z,1513219379.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:59.059Z,1513219379.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:59.427Z,1513219379.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:59.472Z,1513219379.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:42:59.831Z,1513219379.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:42:59.846Z,1513219379.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:00.245Z,1513219380.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:00.271Z,1513219380.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:00.676Z,1513219380.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:00.719Z,1513219380.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:01.046Z,1513219381.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:01.070Z,1513219381.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:01.434Z,1513219381.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:01.449Z,1513219381.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:01.839Z,1513219381.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:01.853Z,1513219381.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:02.238Z,1513219382.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:02.303Z,1513219382.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:02.642Z,1513219382.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:02.656Z,1513219382.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:03.037Z,1513219383.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:03.059Z,1513219383.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:03.445Z,1513219383.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:03.460Z,1513219383.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:03.842Z,1513219383.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:03.864Z,1513219383.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:04.251Z,1513219384.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:04.267Z,1513219384.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:04.634Z,1513219384.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:04.662Z,1513219384.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:05.045Z,1513219385.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:05.060Z,1513219385.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:05.429Z,1513219385.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:05.471Z,1513219385.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:05.832Z,1513219385.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:05.867Z,1513219385.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:06.246Z,1513219386.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:06.275Z,1513219386.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:06.659Z,1513219386.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:06.679Z,1513219386.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:07.067Z,1513219387.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:07.095Z,1513219387.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:07.448Z,1513219387.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:07.464Z,1513219387.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:07.839Z,1513219387.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:07.856Z,1513219387.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:08.235Z,1513219388.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:08.262Z,1513219388.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:08.639Z,1513219388.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:08.710Z,1513219388.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:09.031Z,1513219389.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:09.045Z,1513219389.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:09.441Z,1513219389.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:09.479Z,1513219389.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:09.849Z,1513219389.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:09.914Z,1513219389.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:10.246Z,1513219390.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:10.268Z,1513219390.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:10.635Z,1513219390.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:10.684Z,1513219390.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:11.037Z,1513219391.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:11.052Z,1513219391.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:11.436Z,1513219391.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:11.451Z,1513219391.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:11.832Z,1513219391.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:11.846Z,1513219391.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:12.250Z,1513219392.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:12.280Z,1513219392.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:12.650Z,1513219392.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:12.664Z,1513219392.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:13.041Z,1513219393.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:13.064Z,1513219393.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:13.450Z,1513219393.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:13.508Z,1513219393.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:13.836Z,1513219393.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:13.855Z,1513219393.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:14.235Z,1513219394.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:14.250Z,1513219394.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:14.642Z,1513219394.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:14.657Z,1513219394.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:15.034Z,1513219395.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:15.055Z,1513219395.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:15.444Z,1513219395.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:15.460Z,1513219395.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:15.845Z,1513219395.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:15.860Z,1513219395.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:16.245Z,1513219396.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:16.260Z,1513219396.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:16.641Z,1513219396.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:16.738Z,1513219396.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:17.036Z,1513219397.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:17.051Z,1513219397.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:17.431Z,1513219397.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:17.453Z,1513219397.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:17.835Z,1513219397.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:17.850Z,1513219397.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:18.246Z,1513219398.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:18.267Z,1513219398.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:18.645Z,1513219398.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:18.667Z,1513219398.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:19.043Z,1513219399.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:19.088Z,1513219399.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:19.428Z,1513219399.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:19.459Z,1513219399.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:19.896Z,1513219399.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:19.933Z,1513219399.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:20.227Z,1513219400.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:20.263Z,1513219400.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:20.632Z,1513219400.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:20.662Z,1513219400.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:21.028Z,1513219401.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:21.063Z,1513219401.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:21.442Z,1513219401.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:21.477Z,1513219401.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:21.855Z,1513219401.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:21.870Z,1513219401.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:22.237Z,1513219402.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:22.267Z,1513219402.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:22.631Z,1513219402.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:22.669Z,1513219402.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:23.027Z,1513219403.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:23.087Z,1513219403.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:23.443Z,1513219403.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:23.471Z,1513219403.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:23.827Z,1513219403.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:23.842Z,1513219403.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:24.245Z,1513219404.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:24.271Z,1513219404.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:24.656Z,1513219404.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:24.671Z,1513219404.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:25.046Z,1513219405.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:25.068Z,1513219405.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:25.431Z,1513219405.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:25.467Z,1513219405.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:25.836Z,1513219405.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:25.850Z,1513219405.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:26.255Z,1513219406.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:26.296Z,1513219406.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:26.635Z,1513219406.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:26.656Z,1513219406.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:27.035Z,1513219407.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:27.049Z,1513219407.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:27.442Z,1513219407.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:27.456Z,1513219407.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:27.841Z,1513219407.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:27.856Z,1513219407.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:28.242Z,1513219408.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:28.257Z,1513219408.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:28.639Z,1513219408.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:28.655Z,1513219408.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:29.035Z,1513219409.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:29.055Z,1513219409.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:29.461Z,1513219409.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:29.499Z,1513219409.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:29.845Z,1513219409.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:29.867Z,1513219409.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:30.250Z,1513219410.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:30.265Z,1513219410.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:30.651Z,1513219410.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:30.671Z,1513219410.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:31.049Z,1513219411.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:31.114Z,1513219411.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:31.434Z,1513219411.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:31.495Z,1513219411.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:31.844Z,1513219411.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:31.863Z,1513219411.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:32.228Z,1513219412.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:32.275Z,1513219412.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:32.667Z,1513219412.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:32.710Z,1513219412.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:33.027Z,1513219413.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:33.083Z,1513219413.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:33.449Z,1513219413.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:33.478Z,1513219413.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:33.845Z,1513219413.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:33.872Z,1513219413.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:34.249Z,1513219414.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:34.271Z,1513219414.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:34.636Z,1513219414.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:34.650Z,1513219414.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:35.035Z,1513219415.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:35.075Z,1513219415.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:35.448Z,1513219415.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:35.478Z,1513219415.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:35.878Z,1513219415.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:35.927Z,1513219415.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:36.250Z,1513219416.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:36.279Z,1513219416.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:36.645Z,1513219416.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:36.676Z,1513219416.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:37.042Z,1513219417.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:37.056Z,1513219417.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:37.432Z,1513219417.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:37.448Z,1513219417.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:37.832Z,1513219417.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:37.855Z,1513219417.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:38.237Z,1513219418.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:38.252Z,1513219418.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:38.638Z,1513219418.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:38.653Z,1513219418.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:39.083Z,1513219419.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:39.106Z,1513219419.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:39.450Z,1513219419.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:39.481Z,1513219419.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:39.851Z,1513219419.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:39.880Z,1513219419.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:40.239Z,1513219420.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:40.254Z,1513219420.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:40.639Z,1513219420.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:40.653Z,1513219420.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:41.037Z,1513219421.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:41.052Z,1513219421.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:41.437Z,1513219421.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:41.487Z,1513219421.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:41.491Z,1513219421.491 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:38:41.1Z
2017-12-14T02:43:41.491Z,1513219421.491 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:43:41.491Z,1513219421.491 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:43:41.838Z,1513219421.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:41.863Z,1513219421.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:42.731Z,1513219422.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:42.768Z,1513219422.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:42.942Z,1513219422.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:42.974Z,1513219422.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:46.338Z,1513219426.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:46.375Z,1513219426.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:46.449Z,1513219426.449 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0052.lzma
2017-12-14T02:43:46.479Z,1513219426.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:46.526Z,1513219426.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:46.828Z,1513219426.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:46.848Z,1513219426.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:47.207Z,1513219427.207 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0052.lzma.bak
2017-12-14T02:43:47.207Z,1513219427.207 [DataOverHttps](INFO): SBD MOMSN=5437426
2017-12-14T02:43:47.241Z,1513219427.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:47.273Z,1513219427.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:48.450Z,1513219428.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:48.483Z,1513219428.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:48.589Z,1513219428.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:48.635Z,1513219428.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:52.246Z,1513219432.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:52.261Z,1513219432.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:52.371Z,1513219432.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:52.411Z,1513219432.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:52.762Z,1513219432.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:52.878Z,1513219432.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:53.152Z,1513219433.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:53.207Z,1513219433.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:53.550Z,1513219433.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:53.607Z,1513219433.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:53.952Z,1513219433.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:53.967Z,1513219433.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:57.443Z,1513219437.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:57.486Z,1513219437.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:57.566Z,1513219437.566 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0053.lzma
2017-12-14T02:43:57.613Z,1513219437.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:57.647Z,1513219437.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:57.977Z,1513219437.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:58.039Z,1513219438.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:58.319Z,1513219438.319 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0053.lzma.bak
2017-12-14T02:43:58.319Z,1513219438.319 [DataOverHttps](INFO): SBD MOMSN=5437428
2017-12-14T02:43:58.357Z,1513219438.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:58.372Z,1513219438.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:59.556Z,1513219439.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:59.572Z,1513219439.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:43:59.595Z,1513219439.595 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:43:59.596Z,1513219439.596 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:43:59.596Z,1513219439.596 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:43:59.671Z,1513219439.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:43:59.719Z,1513219439.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:03.070Z,1513219443.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:03.092Z,1513219443.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:03.248Z,1513219443.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:03.279Z,1513219443.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:03.531Z,1513219443.531 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T02:44:03.531Z,1513219443.531 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T02:44:03.531Z,1513219443.531 [DropWeight](ERROR): Hardware Fault
2017-12-14T02:44:03.562Z,1513219443.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:03.607Z,1513219443.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:03.627Z,1513219443.627 [CBIT](INFO): Critical error at 20171214T024403
2017-12-14T02:44:03.634Z,1513219443.634 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T02:44:03.635Z,1513219443.635 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T02:44:03.948Z,1513219443.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:03.963Z,1513219443.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:03.986Z,1513219443.986 [CBIT](INFO): Critical error at 20171214T024403
2017-12-14T02:44:04.344Z,1513219444.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:04.364Z,1513219444.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:04.746Z,1513219444.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:04.767Z,1513219444.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:05.156Z,1513219445.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:05.175Z,1513219445.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:05.563Z,1513219445.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:05.578Z,1513219445.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:05.966Z,1513219445.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:05.983Z,1513219445.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:06.336Z,1513219446.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:06.409Z,1513219446.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:06.738Z,1513219446.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:06.816Z,1513219446.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:07.138Z,1513219447.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:07.174Z,1513219447.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:07.543Z,1513219447.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:07.606Z,1513219447.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:07.970Z,1513219447.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:07.986Z,1513219447.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:08.358Z,1513219448.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:08.384Z,1513219448.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:08.755Z,1513219448.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:08.838Z,1513219448.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:09.150Z,1513219449.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:09.166Z,1513219449.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:09.547Z,1513219449.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:09.561Z,1513219449.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:09.991Z,1513219449.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:10.006Z,1513219450.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:10.352Z,1513219450.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:10.371Z,1513219450.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:10.840Z,1513219450.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:10.903Z,1513219450.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:11.159Z,1513219451.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:11.186Z,1513219451.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:11.560Z,1513219451.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:11.576Z,1513219451.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:11.957Z,1513219451.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:11.980Z,1513219451.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:12.332Z,1513219452.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:12.355Z,1513219452.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:12.739Z,1513219452.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:12.771Z,1513219452.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:13.149Z,1513219453.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:13.163Z,1513219453.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:13.544Z,1513219453.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:13.560Z,1513219453.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:13.948Z,1513219453.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:13.964Z,1513219453.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:14.351Z,1513219454.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:14.371Z,1513219454.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:14.758Z,1513219454.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:14.779Z,1513219454.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:15.214Z,1513219455.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:15.277Z,1513219455.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:15.551Z,1513219455.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:15.575Z,1513219455.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:15.945Z,1513219455.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:15.972Z,1513219455.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:16.349Z,1513219456.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:16.402Z,1513219456.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:16.742Z,1513219456.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:16.783Z,1513219456.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:17.230Z,1513219457.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:17.292Z,1513219457.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:17.562Z,1513219457.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:17.590Z,1513219457.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:17.962Z,1513219457.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:17.990Z,1513219457.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:18.349Z,1513219458.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:18.425Z,1513219458.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:18.751Z,1513219458.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:18.848Z,1513219458.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:19.139Z,1513219459.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:19.174Z,1513219459.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:19.539Z,1513219459.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:19.583Z,1513219459.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:19.946Z,1513219459.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:19.981Z,1513219459.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:20.358Z,1513219460.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:20.411Z,1513219460.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:20.765Z,1513219460.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:20.847Z,1513219460.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:21.159Z,1513219461.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:21.183Z,1513219461.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:21.544Z,1513219461.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:21.560Z,1513219461.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:21.948Z,1513219461.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:21.962Z,1513219461.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:22.348Z,1513219462.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:22.363Z,1513219462.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:22.746Z,1513219462.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:22.862Z,1513219462.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:23.149Z,1513219463.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:23.164Z,1513219463.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:23.558Z,1513219463.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:23.642Z,1513219463.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:23.958Z,1513219463.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:23.987Z,1513219463.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:24.343Z,1513219464.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:24.370Z,1513219464.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:24.749Z,1513219464.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:24.767Z,1513219464.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:25.138Z,1513219465.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:25.176Z,1513219465.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:25.540Z,1513219465.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:25.570Z,1513219465.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:25.943Z,1513219465.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:25.975Z,1513219465.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:26.358Z,1513219466.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:26.386Z,1513219466.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:26.750Z,1513219466.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:26.937Z,1513219466.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:27.158Z,1513219467.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:27.187Z,1513219467.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:27.542Z,1513219467.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:27.567Z,1513219467.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:27.951Z,1513219467.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:27.966Z,1513219467.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:28.349Z,1513219468.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:28.364Z,1513219468.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:28.748Z,1513219468.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:28.807Z,1513219468.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:29.200Z,1513219469.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:29.254Z,1513219469.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:29.569Z,1513219469.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:29.601Z,1513219469.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:29.959Z,1513219469.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:29.974Z,1513219469.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:30.339Z,1513219470.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:30.372Z,1513219470.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:30.753Z,1513219470.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:30.768Z,1513219470.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:31.188Z,1513219471.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:31.220Z,1513219471.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:31.542Z,1513219471.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:31.557Z,1513219471.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:31.959Z,1513219471.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:32.004Z,1513219472.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:32.356Z,1513219472.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:32.386Z,1513219472.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:32.794Z,1513219472.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:32.881Z,1513219472.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:33.181Z,1513219473.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:33.247Z,1513219473.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:33.552Z,1513219473.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:33.568Z,1513219473.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:33.946Z,1513219473.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:33.960Z,1513219473.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:34.346Z,1513219474.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:34.362Z,1513219474.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:34.744Z,1513219474.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:34.772Z,1513219474.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:35.163Z,1513219475.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:35.178Z,1513219475.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:35.563Z,1513219475.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:35.584Z,1513219475.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:35.964Z,1513219475.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:35.988Z,1513219475.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:36.339Z,1513219476.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:36.372Z,1513219476.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:36.739Z,1513219476.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:36.823Z,1513219476.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:37.139Z,1513219477.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:37.176Z,1513219477.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:37.546Z,1513219477.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:37.577Z,1513219477.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:37.949Z,1513219477.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:37.964Z,1513219477.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:38.354Z,1513219478.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:38.369Z,1513219478.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:38.754Z,1513219478.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:38.768Z,1513219478.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:39.155Z,1513219479.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:39.183Z,1513219479.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:39.183Z,1513219479.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2017-12-14T02:44:39.183Z,1513219479.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:44:39.189Z,1513219479.189 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:39.189Z,1513219479.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2017-12-14T02:44:39.189Z,1513219479.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:44:39.191Z,1513219479.191 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:39.191Z,1513219479.191 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2017-12-14T02:44:39.191Z,1513219479.191 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:44:39.234Z,1513219479.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:44:39.234Z,1513219479.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:44:39.235Z,1513219479.235 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:44:39.542Z,1513219479.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:39.615Z,1513219479.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:44:39.615Z,1513219479.615 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2017-12-14T02:44:39.615Z,1513219479.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:44:39.616Z,1513219479.616 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2017-12-14T02:44:39.616Z,1513219479.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:44:39.616Z,1513219479.616 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2017-12-14T02:44:39.955Z,1513219479.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:39.993Z,1513219479.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:44:39.994Z,1513219479.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:44:39.994Z,1513219479.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:44:39.995Z,1513219479.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:44:39.995Z,1513219479.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:44:39.995Z,1513219479.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:44:39.996Z,1513219479.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:44:39.996Z,1513219479.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:44:39.996Z,1513219479.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:44:40.347Z,1513219480.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:40.362Z,1513219480.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:40.744Z,1513219480.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:40.795Z,1513219480.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:41.153Z,1513219481.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:41.211Z,1513219481.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:41.562Z,1513219481.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:41.583Z,1513219481.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:41.961Z,1513219481.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:42.011Z,1513219482.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:42.346Z,1513219482.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:42.369Z,1513219482.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:42.746Z,1513219482.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:42.827Z,1513219482.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:43.195Z,1513219483.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:43.240Z,1513219483.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:43.539Z,1513219483.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:43.572Z,1513219483.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:43.936Z,1513219483.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:43.963Z,1513219483.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:44.362Z,1513219484.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:44.377Z,1513219484.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:44.763Z,1513219484.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:44.783Z,1513219484.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:45.206Z,1513219485.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:45.220Z,1513219485.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:45.539Z,1513219485.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:45.576Z,1513219485.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:45.972Z,1513219485.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:46.030Z,1513219486.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:46.339Z,1513219486.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:46.370Z,1513219486.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:46.739Z,1513219486.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:46.771Z,1513219486.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:47.162Z,1513219487.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:47.195Z,1513219487.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:47.563Z,1513219487.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:47.591Z,1513219487.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:47.950Z,1513219487.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:47.966Z,1513219487.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:48.348Z,1513219488.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:48.362Z,1513219488.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:48.742Z,1513219488.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:48.771Z,1513219488.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:49.161Z,1513219489.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:49.196Z,1513219489.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:49.549Z,1513219489.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:49.582Z,1513219489.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:49.936Z,1513219489.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:49.952Z,1513219489.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:50.358Z,1513219490.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:50.387Z,1513219490.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:50.758Z,1513219490.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:50.832Z,1513219490.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:51.158Z,1513219491.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:51.204Z,1513219491.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:51.547Z,1513219491.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:51.567Z,1513219491.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:51.944Z,1513219491.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:51.959Z,1513219491.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:52.364Z,1513219492.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:52.400Z,1513219492.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:52.755Z,1513219492.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:52.852Z,1513219492.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:53.163Z,1513219493.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:53.178Z,1513219493.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:53.566Z,1513219493.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:53.581Z,1513219493.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:53.978Z,1513219493.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:53.999Z,1513219493.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:54.343Z,1513219494.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:54.376Z,1513219494.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:54.736Z,1513219494.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:54.752Z,1513219494.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:55.149Z,1513219495.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:55.164Z,1513219495.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:55.578Z,1513219495.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:55.603Z,1513219495.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:55.946Z,1513219495.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:55.961Z,1513219495.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:56.352Z,1513219496.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:56.367Z,1513219496.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:56.754Z,1513219496.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:56.768Z,1513219496.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:57.227Z,1513219497.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:57.246Z,1513219497.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:57.543Z,1513219497.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:57.579Z,1513219497.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:57.947Z,1513219497.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:57.961Z,1513219497.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:58.342Z,1513219498.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:58.363Z,1513219498.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:58.768Z,1513219498.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:58.810Z,1513219498.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:59.223Z,1513219499.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:59.253Z,1513219499.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:59.558Z,1513219499.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:59.581Z,1513219499.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:44:59.950Z,1513219499.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:44:59.976Z,1513219499.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:00.341Z,1513219500.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:00.372Z,1513219500.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:03.884Z,1513219503.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:03.966Z,1513219503.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:04.063Z,1513219504.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:04.107Z,1513219504.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:04.445Z,1513219504.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:04.476Z,1513219504.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:04.890Z,1513219504.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:04.940Z,1513219504.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:05.256Z,1513219505.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:05.287Z,1513219505.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:05.636Z,1513219505.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:05.684Z,1513219505.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:06.036Z,1513219506.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:06.050Z,1513219506.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:06.445Z,1513219506.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:06.459Z,1513219506.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:06.857Z,1513219506.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:06.894Z,1513219506.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:07.245Z,1513219507.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:07.260Z,1513219507.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:07.657Z,1513219507.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:07.672Z,1513219507.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:08.046Z,1513219508.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:08.060Z,1513219508.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:08.436Z,1513219508.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:08.459Z,1513219508.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:08.884Z,1513219508.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:08.950Z,1513219508.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:09.224Z,1513219509.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:09.252Z,1513219509.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:09.632Z,1513219509.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:09.667Z,1513219509.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:10.031Z,1513219510.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:10.067Z,1513219510.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:10.438Z,1513219510.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:10.472Z,1513219510.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:10.842Z,1513219510.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:10.879Z,1513219510.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:11.250Z,1513219511.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:11.276Z,1513219511.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:11.643Z,1513219511.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:11.672Z,1513219511.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:12.035Z,1513219512.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:12.075Z,1513219512.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:12.434Z,1513219512.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:12.471Z,1513219512.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:12.835Z,1513219512.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:12.850Z,1513219512.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:13.242Z,1513219513.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:13.273Z,1513219513.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:13.641Z,1513219513.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:13.656Z,1513219513.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:14.038Z,1513219514.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:14.081Z,1513219514.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:14.438Z,1513219514.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:14.453Z,1513219514.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:14.884Z,1513219514.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:14.932Z,1513219514.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:15.243Z,1513219515.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:15.283Z,1513219515.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:15.639Z,1513219515.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:15.654Z,1513219515.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:16.040Z,1513219516.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:16.059Z,1513219516.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:16.444Z,1513219516.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:16.459Z,1513219516.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:16.881Z,1513219516.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:16.907Z,1513219516.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:17.252Z,1513219517.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:17.267Z,1513219517.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:17.639Z,1513219517.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:17.655Z,1513219517.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:18.028Z,1513219518.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:18.059Z,1513219518.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:18.429Z,1513219518.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:18.463Z,1513219518.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:18.879Z,1513219518.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:18.912Z,1513219518.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:19.254Z,1513219519.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:19.272Z,1513219519.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:19.657Z,1513219519.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:19.671Z,1513219519.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:20.054Z,1513219520.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:20.069Z,1513219520.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:20.425Z,1513219520.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:20.457Z,1513219520.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:20.873Z,1513219520.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:20.924Z,1513219520.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:21.237Z,1513219521.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:21.256Z,1513219521.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:21.640Z,1513219521.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:21.656Z,1513219521.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:22.033Z,1513219522.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:22.055Z,1513219522.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:22.446Z,1513219522.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:22.464Z,1513219522.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:22.896Z,1513219522.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:22.940Z,1513219522.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:23.240Z,1513219523.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:23.285Z,1513219523.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:23.636Z,1513219523.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:23.651Z,1513219523.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:24.036Z,1513219524.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:24.051Z,1513219524.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:24.428Z,1513219524.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:24.459Z,1513219524.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:24.826Z,1513219524.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:24.860Z,1513219524.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:25.246Z,1513219525.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:25.263Z,1513219525.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:25.653Z,1513219525.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:25.668Z,1513219525.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:26.047Z,1513219526.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:26.132Z,1513219526.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:26.428Z,1513219526.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:26.463Z,1513219526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:26.833Z,1513219526.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:26.848Z,1513219526.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:27.284Z,1513219527.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:27.351Z,1513219527.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:27.632Z,1513219527.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:27.651Z,1513219527.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:28.050Z,1513219528.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:28.108Z,1513219528.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:28.449Z,1513219528.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:28.463Z,1513219528.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:28.907Z,1513219528.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:28.938Z,1513219528.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:29.233Z,1513219529.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:29.260Z,1513219529.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:29.638Z,1513219529.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:29.659Z,1513219529.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:30.028Z,1513219530.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:30.042Z,1513219530.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:30.450Z,1513219530.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:30.493Z,1513219530.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:30.884Z,1513219530.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:30.904Z,1513219530.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:31.254Z,1513219531.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:31.275Z,1513219531.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:31.627Z,1513219531.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:31.659Z,1513219531.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:32.027Z,1513219532.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:32.053Z,1513219532.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:32.432Z,1513219532.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:32.457Z,1513219532.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:32.867Z,1513219532.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:32.917Z,1513219532.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:33.258Z,1513219533.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:33.273Z,1513219533.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:33.720Z,1513219533.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:33.768Z,1513219533.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:34.046Z,1513219534.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:34.087Z,1513219534.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:34.434Z,1513219534.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:34.472Z,1513219534.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:34.872Z,1513219534.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:34.899Z,1513219534.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:35.242Z,1513219535.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:35.256Z,1513219535.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:35.634Z,1513219535.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:35.648Z,1513219535.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:36.032Z,1513219536.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:36.055Z,1513219536.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:36.452Z,1513219536.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:36.503Z,1513219536.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:36.902Z,1513219536.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:36.952Z,1513219536.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:37.259Z,1513219537.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:37.283Z,1513219537.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:37.631Z,1513219537.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:37.662Z,1513219537.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:38.034Z,1513219538.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:38.060Z,1513219538.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:38.432Z,1513219538.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:38.463Z,1513219538.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:38.827Z,1513219538.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:38.864Z,1513219538.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:39.244Z,1513219539.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:39.259Z,1513219539.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:39.649Z,1513219539.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:39.669Z,1513219539.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:40.054Z,1513219540.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:40.069Z,1513219540.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:40.444Z,1513219540.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:40.473Z,1513219540.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:40.827Z,1513219540.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:40.844Z,1513219540.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:41.246Z,1513219541.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:41.274Z,1513219541.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:41.638Z,1513219541.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:41.652Z,1513219541.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:42.023Z,1513219542.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:42.055Z,1513219542.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:42.450Z,1513219542.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:42.479Z,1513219542.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:42.876Z,1513219542.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:42.905Z,1513219542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:43.272Z,1513219543.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:43.296Z,1513219543.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:43.635Z,1513219543.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:43.651Z,1513219543.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:44.034Z,1513219544.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:44.067Z,1513219544.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:44.432Z,1513219544.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:44.458Z,1513219544.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:44.877Z,1513219544.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:44.909Z,1513219544.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:45.252Z,1513219545.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:45.268Z,1513219545.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:45.649Z,1513219545.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:45.665Z,1513219545.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:46.045Z,1513219546.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:46.060Z,1513219546.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:46.427Z,1513219546.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:46.503Z,1513219546.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:46.868Z,1513219546.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:46.917Z,1513219546.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:47.231Z,1513219547.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:47.259Z,1513219547.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:47.627Z,1513219547.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:47.659Z,1513219547.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:48.027Z,1513219548.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:48.058Z,1513219548.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:48.446Z,1513219548.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:48.503Z,1513219548.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:48.883Z,1513219548.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:48.932Z,1513219548.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:49.250Z,1513219549.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:49.269Z,1513219549.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:49.664Z,1513219549.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:49.700Z,1513219549.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:50.042Z,1513219550.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:50.087Z,1513219550.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:50.435Z,1513219550.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:50.450Z,1513219550.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:50.845Z,1513219550.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:50.954Z,1513219550.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:51.250Z,1513219551.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:51.271Z,1513219551.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:51.653Z,1513219551.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:51.683Z,1513219551.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:52.051Z,1513219552.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:52.074Z,1513219552.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:52.438Z,1513219552.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:52.453Z,1513219552.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:52.845Z,1513219552.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:52.888Z,1513219552.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:53.228Z,1513219553.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:53.263Z,1513219553.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:53.628Z,1513219553.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:53.663Z,1513219553.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:54.026Z,1513219554.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:54.049Z,1513219554.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:54.442Z,1513219554.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:54.469Z,1513219554.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:54.841Z,1513219554.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:54.868Z,1513219554.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:55.258Z,1513219555.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:55.282Z,1513219555.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:55.639Z,1513219555.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:55.667Z,1513219555.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:56.078Z,1513219556.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:56.104Z,1513219556.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:56.434Z,1513219556.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:56.463Z,1513219556.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:56.879Z,1513219556.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:56.924Z,1513219556.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:57.249Z,1513219557.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:57.285Z,1513219557.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:57.652Z,1513219557.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:57.675Z,1513219557.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:58.051Z,1513219558.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:58.072Z,1513219558.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:58.434Z,1513219558.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:58.450Z,1513219558.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:58.869Z,1513219558.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:58.900Z,1513219558.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:59.279Z,1513219559.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:59.359Z,1513219559.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:45:59.634Z,1513219559.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:45:59.648Z,1513219559.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:00.046Z,1513219560.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:00.072Z,1513219560.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:00.446Z,1513219560.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:00.470Z,1513219560.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:03.942Z,1513219563.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:03.972Z,1513219563.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:04.060Z,1513219564.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:04.099Z,1513219564.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:04.427Z,1513219564.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:04.442Z,1513219564.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:04.827Z,1513219564.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:04.929Z,1513219564.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:05.219Z,1513219565.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:05.250Z,1513219565.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:05.660Z,1513219565.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:05.704Z,1513219565.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:06.023Z,1513219566.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:06.054Z,1513219566.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:06.443Z,1513219566.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:06.461Z,1513219566.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:06.844Z,1513219566.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:06.864Z,1513219566.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:07.245Z,1513219567.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:07.260Z,1513219567.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:07.638Z,1513219567.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:07.659Z,1513219567.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:08.019Z,1513219568.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:08.058Z,1513219568.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:08.424Z,1513219568.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:08.458Z,1513219568.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:08.842Z,1513219568.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:08.878Z,1513219568.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:09.230Z,1513219569.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:09.272Z,1513219569.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:09.638Z,1513219569.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:09.667Z,1513219569.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:10.038Z,1513219570.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:10.063Z,1513219570.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:10.425Z,1513219570.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:10.449Z,1513219570.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:10.871Z,1513219570.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:10.918Z,1513219570.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:11.226Z,1513219571.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:11.312Z,1513219571.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:11.624Z,1513219571.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:11.647Z,1513219571.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:12.056Z,1513219572.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:12.087Z,1513219572.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:12.450Z,1513219572.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:12.495Z,1513219572.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:12.890Z,1513219572.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:12.926Z,1513219572.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:13.235Z,1513219573.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:13.295Z,1513219573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:13.631Z,1513219573.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:13.646Z,1513219573.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:14.031Z,1513219574.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:14.046Z,1513219574.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:14.430Z,1513219574.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:14.444Z,1513219574.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:14.880Z,1513219574.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:14.903Z,1513219574.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:15.268Z,1513219575.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:15.291Z,1513219575.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:15.643Z,1513219575.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:15.663Z,1513219575.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:16.030Z,1513219576.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:16.056Z,1513219576.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:16.420Z,1513219576.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:16.460Z,1513219576.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:16.877Z,1513219576.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:16.908Z,1513219576.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:17.212Z,1513219577.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:17.246Z,1513219577.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:17.620Z,1513219577.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:17.654Z,1513219577.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:18.018Z,1513219578.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:18.051Z,1513219578.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:18.464Z,1513219578.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:18.495Z,1513219578.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:18.889Z,1513219578.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:18.940Z,1513219578.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:19.232Z,1513219579.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:19.279Z,1513219579.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:19.626Z,1513219579.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:19.679Z,1513219579.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:20.086Z,1513219580.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:20.109Z,1513219580.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:20.438Z,1513219580.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:20.459Z,1513219580.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:20.819Z,1513219580.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:20.859Z,1513219580.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:21.259Z,1513219581.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:21.296Z,1513219581.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:21.683Z,1513219581.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:21.739Z,1513219581.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:22.040Z,1513219582.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:22.081Z,1513219582.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:22.461Z,1513219582.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:22.486Z,1513219582.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:22.829Z,1513219582.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:22.878Z,1513219582.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:23.233Z,1513219583.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:23.256Z,1513219583.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:23.620Z,1513219583.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:23.636Z,1513219583.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:24.022Z,1513219584.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:24.038Z,1513219584.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:24.427Z,1513219584.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:24.470Z,1513219584.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:24.872Z,1513219584.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:24.927Z,1513219584.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:25.233Z,1513219585.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:25.276Z,1513219585.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:25.629Z,1513219585.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:25.668Z,1513219585.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:26.030Z,1513219586.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:26.073Z,1513219586.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:26.434Z,1513219586.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:26.464Z,1513219586.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:26.850Z,1513219586.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:26.911Z,1513219586.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:27.234Z,1513219587.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:27.273Z,1513219587.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:27.639Z,1513219587.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:27.709Z,1513219587.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:28.030Z,1513219588.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:28.060Z,1513219588.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:28.459Z,1513219588.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:28.486Z,1513219588.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:28.877Z,1513219588.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:28.955Z,1513219588.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:29.241Z,1513219589.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:29.264Z,1513219589.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:29.651Z,1513219589.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:29.669Z,1513219589.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:30.035Z,1513219590.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:30.059Z,1513219590.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:30.451Z,1513219590.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:30.469Z,1513219590.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:30.899Z,1513219590.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:30.939Z,1513219590.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:31.266Z,1513219591.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:31.281Z,1513219591.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:31.642Z,1513219591.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:31.700Z,1513219591.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:32.034Z,1513219592.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:32.049Z,1513219592.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:32.433Z,1513219592.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:32.486Z,1513219592.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:32.911Z,1513219592.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:32.978Z,1513219592.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:33.261Z,1513219593.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:33.319Z,1513219593.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:33.671Z,1513219593.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:33.747Z,1513219593.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:34.034Z,1513219594.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:34.135Z,1513219594.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:34.431Z,1513219594.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:34.460Z,1513219594.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:34.820Z,1513219594.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:34.917Z,1513219594.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:35.242Z,1513219595.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:35.324Z,1513219595.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:35.622Z,1513219595.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:35.670Z,1513219595.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:36.025Z,1513219596.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:36.067Z,1513219596.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:36.437Z,1513219596.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:36.485Z,1513219596.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:36.871Z,1513219596.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:36.927Z,1513219596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:37.235Z,1513219597.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:37.271Z,1513219597.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:37.620Z,1513219597.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:37.664Z,1513219597.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:38.081Z,1513219598.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:38.120Z,1513219598.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:38.454Z,1513219598.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:38.524Z,1513219598.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:38.871Z,1513219598.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:38.919Z,1513219598.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:39.249Z,1513219599.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:39.275Z,1513219599.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:39.654Z,1513219599.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:39.720Z,1513219599.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:40.032Z,1513219600.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:40.071Z,1513219600.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:40.454Z,1513219600.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:40.484Z,1513219600.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:40.889Z,1513219600.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:40.937Z,1513219600.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:41.226Z,1513219601.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:41.295Z,1513219601.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:41.644Z,1513219601.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:41.668Z,1513219601.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:42.018Z,1513219602.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:42.053Z,1513219602.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:42.449Z,1513219602.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:42.464Z,1513219602.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:42.884Z,1513219602.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:42.905Z,1513219602.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:43.248Z,1513219603.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:43.263Z,1513219603.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:43.620Z,1513219603.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:43.647Z,1513219603.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:44.019Z,1513219604.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:44.053Z,1513219604.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:44.420Z,1513219604.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:44.472Z,1513219604.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:44.864Z,1513219604.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:44.916Z,1513219604.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:45.242Z,1513219605.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:45.280Z,1513219605.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:45.633Z,1513219605.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:45.659Z,1513219605.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:46.046Z,1513219606.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:46.061Z,1513219606.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:46.423Z,1513219606.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:46.439Z,1513219606.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:46.822Z,1513219606.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:46.916Z,1513219606.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:47.228Z,1513219607.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:47.252Z,1513219607.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:47.626Z,1513219607.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:47.648Z,1513219607.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:48.040Z,1513219608.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:48.054Z,1513219608.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:48.448Z,1513219608.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:48.463Z,1513219608.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:48.846Z,1513219608.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:48.867Z,1513219608.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:49.231Z,1513219609.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:49.268Z,1513219609.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:49.624Z,1513219609.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:49.647Z,1513219609.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:50.029Z,1513219610.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:50.070Z,1513219610.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:50.431Z,1513219610.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:50.451Z,1513219610.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:50.816Z,1513219610.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:50.844Z,1513219610.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:51.258Z,1513219611.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:51.296Z,1513219611.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:51.642Z,1513219611.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:51.664Z,1513219611.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:52.039Z,1513219612.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:52.054Z,1513219612.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:52.437Z,1513219612.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:52.452Z,1513219612.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:52.873Z,1513219612.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:52.904Z,1513219612.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:53.219Z,1513219613.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:53.263Z,1513219613.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:53.632Z,1513219613.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:53.647Z,1513219613.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:54.044Z,1513219614.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:54.068Z,1513219614.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:54.441Z,1513219614.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:54.456Z,1513219614.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:54.871Z,1513219614.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:54.900Z,1513219614.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:55.247Z,1513219615.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:55.267Z,1513219615.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:55.619Z,1513219615.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:55.653Z,1513219615.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:56.018Z,1513219616.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:56.059Z,1513219616.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:56.420Z,1513219616.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:56.490Z,1513219616.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:56.865Z,1513219616.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:56.912Z,1513219616.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:57.239Z,1513219617.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:57.283Z,1513219617.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:57.643Z,1513219617.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:57.713Z,1513219617.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:58.038Z,1513219618.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:58.064Z,1513219618.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:58.428Z,1513219618.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:58.483Z,1513219618.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:58.863Z,1513219618.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:58.894Z,1513219618.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:59.217Z,1513219619.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:59.251Z,1513219619.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:46:59.628Z,1513219619.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:46:59.648Z,1513219619.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:00.032Z,1513219620.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:00.047Z,1513219620.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:00.456Z,1513219620.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:00.487Z,1513219620.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:00.884Z,1513219620.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:00.928Z,1513219620.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:04.267Z,1513219624.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:04.281Z,1513219624.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:04.379Z,1513219624.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:04.427Z,1513219624.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:04.743Z,1513219624.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:04.775Z,1513219624.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:05.221Z,1513219625.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:05.240Z,1513219625.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:05.535Z,1513219625.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:05.568Z,1513219625.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:05.934Z,1513219625.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:05.970Z,1513219625.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:06.350Z,1513219626.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:06.376Z,1513219626.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:06.750Z,1513219626.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:06.843Z,1513219626.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:07.141Z,1513219627.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:07.159Z,1513219627.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:07.538Z,1513219627.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:07.553Z,1513219627.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:07.941Z,1513219627.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:07.959Z,1513219627.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:08.339Z,1513219628.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:08.354Z,1513219628.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:08.740Z,1513219628.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:08.756Z,1513219628.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:09.146Z,1513219629.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:09.171Z,1513219629.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:09.548Z,1513219629.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:09.583Z,1513219629.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:09.944Z,1513219629.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:09.972Z,1513219629.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:10.338Z,1513219630.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:10.354Z,1513219630.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:10.735Z,1513219630.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:10.749Z,1513219630.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:11.140Z,1513219631.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:11.156Z,1513219631.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:11.534Z,1513219631.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:11.569Z,1513219631.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:11.938Z,1513219631.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:11.954Z,1513219631.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:12.353Z,1513219632.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:12.369Z,1513219632.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:12.746Z,1513219632.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:12.760Z,1513219632.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:13.163Z,1513219633.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:13.203Z,1513219633.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:13.546Z,1513219633.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:13.571Z,1513219633.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:13.939Z,1513219633.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:13.975Z,1513219633.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:14.336Z,1513219634.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:14.370Z,1513219634.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:14.735Z,1513219634.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:14.751Z,1513219634.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:15.142Z,1513219635.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:15.174Z,1513219635.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:15.550Z,1513219635.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:15.572Z,1513219635.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:16.054Z,1513219636.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:16.103Z,1513219636.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:16.336Z,1513219636.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:16.391Z,1513219636.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:16.739Z,1513219636.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:16.759Z,1513219636.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:17.185Z,1513219637.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:17.227Z,1513219637.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:17.536Z,1513219637.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:17.563Z,1513219637.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:17.931Z,1513219637.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:17.958Z,1513219637.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:18.356Z,1513219638.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:18.379Z,1513219638.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:18.749Z,1513219638.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:18.830Z,1513219638.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:19.212Z,1513219639.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:19.235Z,1513219639.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:19.552Z,1513219639.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:19.622Z,1513219639.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:19.935Z,1513219639.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:19.963Z,1513219639.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:20.333Z,1513219640.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:20.375Z,1513219640.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:20.734Z,1513219640.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:20.763Z,1513219640.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:21.141Z,1513219641.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:21.180Z,1513219641.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:21.548Z,1513219641.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:21.574Z,1513219641.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:21.940Z,1513219641.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:21.971Z,1513219641.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:22.434Z,1513219642.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:22.510Z,1513219642.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:22.747Z,1513219642.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:22.845Z,1513219642.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:23.131Z,1513219643.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:23.166Z,1513219643.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:23.543Z,1513219643.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:23.563Z,1513219643.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:23.930Z,1513219643.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:23.955Z,1513219643.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:24.358Z,1513219644.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:24.379Z,1513219644.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:24.752Z,1513219644.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:24.767Z,1513219644.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:25.177Z,1513219645.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:25.208Z,1513219645.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:25.531Z,1513219645.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:25.570Z,1513219645.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:25.928Z,1513219645.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:25.955Z,1513219645.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:26.331Z,1513219646.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:26.366Z,1513219646.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:26.735Z,1513219646.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:26.768Z,1513219646.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:27.157Z,1513219647.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:27.172Z,1513219647.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:27.548Z,1513219647.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:27.576Z,1513219647.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:27.965Z,1513219647.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:27.980Z,1513219647.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:28.332Z,1513219648.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:28.367Z,1513219648.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:28.398Z,1513219648.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:28.731Z,1513219648.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:28.811Z,1513219648.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:29.136Z,1513219649.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:29.159Z,1513219649.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:29.194Z,1513219649.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:29.536Z,1513219649.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:29.552Z,1513219649.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:29.597Z,1513219649.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:29.936Z,1513219649.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:29.951Z,1513219649.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:30.350Z,1513219650.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:30.374Z,1513219650.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:30.393Z,1513219650.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:30.754Z,1513219650.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:30.779Z,1513219650.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:31.190Z,1513219651.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:31.211Z,1513219651.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:31.243Z,1513219651.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:31.543Z,1513219651.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:31.571Z,1513219651.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:31.593Z,1513219651.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:31.930Z,1513219651.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:31.954Z,1513219651.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:32.361Z,1513219652.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:32.390Z,1513219652.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:32.414Z,1513219652.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:32.741Z,1513219652.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:32.763Z,1513219652.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:33.186Z,1513219653.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:33.202Z,1513219653.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:33.245Z,1513219653.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:33.546Z,1513219653.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:33.586Z,1513219653.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:33.589Z,1513219653.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:33.942Z,1513219653.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:33.957Z,1513219653.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:34.341Z,1513219654.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:34.363Z,1513219654.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:34.385Z,1513219654.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:34.739Z,1513219654.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:34.754Z,1513219654.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:35.153Z,1513219655.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:35.168Z,1513219655.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:35.181Z,1513219655.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:35.531Z,1513219655.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:35.595Z,1513219655.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:35.793Z,1513219655.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:35.930Z,1513219655.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:35.966Z,1513219655.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:36.356Z,1513219656.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:36.371Z,1513219656.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:36.591Z,1513219656.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:36.756Z,1513219656.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:36.798Z,1513219656.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:37.157Z,1513219657.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:37.179Z,1513219657.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:37.241Z,1513219657.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:37.532Z,1513219657.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:37.570Z,1513219657.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:37.931Z,1513219657.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:37.959Z,1513219657.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:38.037Z,1513219658.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:38.336Z,1513219658.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:38.368Z,1513219658.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:38.741Z,1513219658.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:38.835Z,1513219658.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:38.852Z,1513219658.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:39.162Z,1513219659.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:39.191Z,1513219659.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:39.242Z,1513219659.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:39.551Z,1513219659.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:39.571Z,1513219659.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:39.963Z,1513219659.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:39.994Z,1513219659.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:40.037Z,1513219660.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:40.340Z,1513219660.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:40.356Z,1513219660.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:40.356Z,1513219660.356 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2017-12-14T02:47:40.356Z,1513219660.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:47:40.358Z,1513219660.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:40.358Z,1513219660.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2017-12-14T02:47:40.358Z,1513219660.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:47:40.360Z,1513219660.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:40.360Z,1513219660.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2017-12-14T02:47:40.360Z,1513219660.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:47:40.373Z,1513219660.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:47:40.373Z,1513219660.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:47:40.374Z,1513219660.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:47:40.731Z,1513219660.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:40.834Z,1513219660.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:41.047Z,1513219661.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:47:41.047Z,1513219661.047 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2017-12-14T02:47:41.048Z,1513219661.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:47:41.048Z,1513219661.048 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2017-12-14T02:47:41.048Z,1513219661.048 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:47:41.048Z,1513219661.048 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2017-12-14T02:47:41.140Z,1513219661.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:41.156Z,1513219661.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:47:41.156Z,1513219661.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:47:41.156Z,1513219661.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:47:41.157Z,1513219661.157 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:47:41.157Z,1513219661.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:47:41.158Z,1513219661.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:47:41.158Z,1513219661.158 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:47:41.158Z,1513219661.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:47:41.159Z,1513219661.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:47:41.309Z,1513219661.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:41.546Z,1513219661.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:41.607Z,1513219661.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:41.941Z,1513219661.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:41.956Z,1513219661.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:42.107Z,1513219662.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:42.342Z,1513219662.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:42.394Z,1513219662.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:42.746Z,1513219662.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:42.761Z,1513219662.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:42.902Z,1513219662.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:43.142Z,1513219663.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:43.163Z,1513219663.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:43.305Z,1513219663.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:43.541Z,1513219663.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:43.557Z,1513219663.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:43.939Z,1513219663.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:43.962Z,1513219663.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:44.103Z,1513219664.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:44.346Z,1513219664.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:44.361Z,1513219664.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:44.735Z,1513219664.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:44.763Z,1513219664.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:44.897Z,1513219664.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:45.222Z,1513219665.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:45.334Z,1513219665.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:45.546Z,1513219665.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:45.560Z,1513219665.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:45.617Z,1513219665.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:45.946Z,1513219665.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:45.960Z,1513219665.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:46.342Z,1513219666.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:46.371Z,1513219666.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:46.414Z,1513219666.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:46.743Z,1513219666.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:46.759Z,1513219666.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:47.203Z,1513219667.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:47.209Z,1513219667.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:47.246Z,1513219667.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:47.532Z,1513219667.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:47.567Z,1513219667.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:47.613Z,1513219667.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:47.941Z,1513219667.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:47.963Z,1513219667.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:48.358Z,1513219668.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:48.373Z,1513219668.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:48.410Z,1513219668.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:48.756Z,1513219668.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:48.796Z,1513219668.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:49.140Z,1513219669.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:49.166Z,1513219669.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:49.206Z,1513219669.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:49.531Z,1513219669.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:49.563Z,1513219669.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:49.609Z,1513219669.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:49.935Z,1513219669.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:49.960Z,1513219669.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:50.332Z,1513219670.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:50.368Z,1513219670.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:50.405Z,1513219670.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:50.728Z,1513219670.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:50.811Z,1513219670.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:51.151Z,1513219671.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:51.176Z,1513219671.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:51.201Z,1513219671.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:51.576Z,1513219671.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:51.595Z,1513219671.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:51.642Z,1513219671.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:51.941Z,1513219671.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:51.963Z,1513219671.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:52.342Z,1513219672.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:52.434Z,1513219672.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:52.438Z,1513219672.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:52.740Z,1513219672.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:52.755Z,1513219672.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:53.140Z,1513219673.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:53.163Z,1513219673.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:53.241Z,1513219673.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:53.544Z,1513219673.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:53.560Z,1513219673.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:53.934Z,1513219673.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:53.959Z,1513219673.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:54.037Z,1513219674.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:54.350Z,1513219674.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:54.371Z,1513219674.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:54.754Z,1513219674.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:54.835Z,1513219674.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:54.859Z,1513219674.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:55.142Z,1513219675.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:55.163Z,1513219675.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:55.249Z,1513219675.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:55.540Z,1513219675.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:55.555Z,1513219675.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:55.941Z,1513219675.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:55.956Z,1513219675.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:56.045Z,1513219676.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:56.335Z,1513219676.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:56.356Z,1513219676.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:56.736Z,1513219676.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:56.798Z,1513219676.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:56.842Z,1513219676.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:57.146Z,1513219677.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:57.161Z,1513219677.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:57.357Z,1513219677.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:57.554Z,1513219677.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:57.583Z,1513219677.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:57.946Z,1513219677.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:57.983Z,1513219677.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:58.154Z,1513219678.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:58.339Z,1513219678.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:58.359Z,1513219678.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:58.740Z,1513219678.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:58.756Z,1513219678.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:58.949Z,1513219678.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:59.190Z,1513219679.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:59.220Z,1513219679.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:59.538Z,1513219679.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:59.557Z,1513219679.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:47:59.605Z,1513219679.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:59.938Z,1513219679.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:47:59.955Z,1513219679.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:00.344Z,1513219680.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:00.360Z,1513219680.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:00.401Z,1513219680.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:00.750Z,1513219680.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:00.765Z,1513219680.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:01.198Z,1513219681.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:01.219Z,1513219681.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:01.267Z,1513219681.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:01.601Z,1513219681.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:02.398Z,1513219682.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:03.193Z,1513219683.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:03.600Z,1513219683.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:04.393Z,1513219684.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:04.726Z,1513219684.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:04.846Z,1513219684.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:04.930Z,1513219684.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:04.957Z,1513219684.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:05.189Z,1513219685.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:05.335Z,1513219685.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:05.383Z,1513219685.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:05.593Z,1513219685.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:05.743Z,1513219685.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:05.758Z,1513219685.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:06.134Z,1513219686.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:06.180Z,1513219686.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:06.389Z,1513219686.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:06.529Z,1513219686.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:06.543Z,1513219686.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:06.928Z,1513219686.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:06.945Z,1513219686.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:07.185Z,1513219687.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:07.378Z,1513219687.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:07.394Z,1513219687.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:07.589Z,1513219687.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:07.726Z,1513219687.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:07.745Z,1513219687.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:08.138Z,1513219688.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:08.153Z,1513219688.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:08.385Z,1513219688.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:08.541Z,1513219688.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:08.556Z,1513219688.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:08.940Z,1513219688.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:08.954Z,1513219688.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:09.182Z,1513219689.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:09.337Z,1513219689.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:09.351Z,1513219689.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:09.585Z,1513219689.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:09.726Z,1513219689.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:09.742Z,1513219689.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:10.122Z,1513219690.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:10.143Z,1513219690.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:10.382Z,1513219690.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:10.531Z,1513219690.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:10.545Z,1513219690.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:10.930Z,1513219690.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:10.963Z,1513219690.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:11.177Z,1513219691.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:11.334Z,1513219691.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:11.363Z,1513219691.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:11.581Z,1513219691.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:11.750Z,1513219691.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:11.765Z,1513219691.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:12.130Z,1513219692.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:12.161Z,1513219692.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:12.377Z,1513219692.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:12.516Z,1513219692.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:12.540Z,1513219692.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:12.920Z,1513219692.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:12.951Z,1513219692.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:13.174Z,1513219693.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:13.315Z,1513219693.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:13.351Z,1513219693.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:13.582Z,1513219693.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:13.718Z,1513219693.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:13.747Z,1513219693.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:14.139Z,1513219694.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:14.167Z,1513219694.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:14.377Z,1513219694.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:14.542Z,1513219694.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:14.595Z,1513219694.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:14.938Z,1513219694.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:14.960Z,1513219694.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:15.178Z,1513219695.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:15.317Z,1513219695.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:15.347Z,1513219695.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:15.581Z,1513219695.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:15.720Z,1513219695.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:15.751Z,1513219695.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:16.120Z,1513219696.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:16.146Z,1513219696.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:16.377Z,1513219696.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:16.515Z,1513219696.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:16.552Z,1513219696.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:16.919Z,1513219696.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:16.941Z,1513219696.941 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T02:48:16.967Z,1513219696.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:17.176Z,1513219697.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:17.338Z,1513219697.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:17.361Z,1513219697.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:17.581Z,1513219697.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:17.742Z,1513219697.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:17.763Z,1513219697.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:18.122Z,1513219698.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:18.164Z,1513219698.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:18.380Z,1513219698.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:18.523Z,1513219698.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:18.548Z,1513219698.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:18.920Z,1513219698.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:18.955Z,1513219698.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:19.173Z,1513219699.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:19.323Z,1513219699.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:19.351Z,1513219699.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:19.581Z,1513219699.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:19.714Z,1513219699.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:19.773Z,1513219699.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:20.142Z,1513219700.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:20.158Z,1513219700.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:20.381Z,1513219700.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:20.554Z,1513219700.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:20.596Z,1513219700.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:20.957Z,1513219700.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:20.979Z,1513219700.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:21.177Z,1513219701.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:21.320Z,1513219701.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:21.352Z,1513219701.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:21.581Z,1513219701.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:21.729Z,1513219701.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:21.753Z,1513219701.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:22.129Z,1513219702.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:22.152Z,1513219702.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:22.377Z,1513219702.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:22.530Z,1513219702.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:22.549Z,1513219702.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:22.935Z,1513219702.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:22.957Z,1513219702.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:23.173Z,1513219703.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:23.335Z,1513219703.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:23.359Z,1513219703.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:23.577Z,1513219703.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:23.751Z,1513219703.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:23.783Z,1513219703.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:24.139Z,1513219704.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:24.161Z,1513219704.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:24.373Z,1513219704.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:24.521Z,1513219704.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:24.561Z,1513219704.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:24.923Z,1513219704.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:24.965Z,1513219704.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:25.171Z,1513219705.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:25.328Z,1513219705.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:25.355Z,1513219705.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:25.577Z,1513219705.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:25.728Z,1513219705.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:25.743Z,1513219705.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:26.132Z,1513219706.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:26.148Z,1513219706.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:26.373Z,1513219706.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:26.533Z,1513219706.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:26.586Z,1513219706.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:26.947Z,1513219706.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:26.998Z,1513219706.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:27.170Z,1513219707.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:27.332Z,1513219707.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:27.351Z,1513219707.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:27.577Z,1513219707.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:27.733Z,1513219707.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:27.748Z,1513219707.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:28.135Z,1513219708.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:28.155Z,1513219708.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:28.373Z,1513219708.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:28.530Z,1513219708.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:28.546Z,1513219708.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:28.926Z,1513219708.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:28.941Z,1513219708.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:29.172Z,1513219709.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:29.332Z,1513219709.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:29.355Z,1513219709.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:29.582Z,1513219709.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:29.739Z,1513219709.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:29.747Z,1513219709.747 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:48:29.747Z,1513219709.747 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:48:29.747Z,1513219709.747 [BPC1](ERROR): Communications Fault
2017-12-14T02:48:29.763Z,1513219709.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:29.802Z,1513219709.802 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:48:30.137Z,1513219710.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:30.175Z,1513219710.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:30.377Z,1513219710.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:30.517Z,1513219710.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:30.548Z,1513219710.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:30.916Z,1513219710.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:30.969Z,1513219710.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:30.995Z,1513219710.995 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:48:30.995Z,1513219710.995 [BPC1] No Fault, FailCount= 1
2017-12-14T02:48:31.173Z,1513219711.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:31.318Z,1513219711.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:31.328Z,1513219711.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-12-14T02:48:31.407Z,1513219711.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:31.579Z,1513219711.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:31.724Z,1513219711.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:31.749Z,1513219711.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:32.138Z,1513219712.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:32.159Z,1513219712.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:32.373Z,1513219712.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:32.545Z,1513219712.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:32.560Z,1513219712.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:32.938Z,1513219712.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:32.959Z,1513219712.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:33.169Z,1513219713.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:33.338Z,1513219713.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:33.370Z,1513219713.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:33.573Z,1513219713.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:33.722Z,1513219713.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:33.754Z,1513219713.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:34.133Z,1513219714.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:34.148Z,1513219714.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:34.369Z,1513219714.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:34.538Z,1513219714.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:34.565Z,1513219714.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:34.930Z,1513219714.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:34.951Z,1513219714.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:35.168Z,1513219715.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:35.338Z,1513219715.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:35.359Z,1513219715.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:35.573Z,1513219715.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:35.742Z,1513219715.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:35.764Z,1513219715.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:36.145Z,1513219716.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:36.159Z,1513219716.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:36.371Z,1513219716.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:36.552Z,1513219716.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:36.598Z,1513219716.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:36.926Z,1513219716.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:36.949Z,1513219716.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:37.165Z,1513219717.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:37.336Z,1513219717.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:37.364Z,1513219717.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:37.569Z,1513219717.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:37.732Z,1513219717.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:37.754Z,1513219717.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:38.138Z,1513219718.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:38.154Z,1513219718.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:38.365Z,1513219718.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:38.543Z,1513219718.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:38.558Z,1513219718.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:38.944Z,1513219718.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:38.958Z,1513219718.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:39.161Z,1513219719.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:39.323Z,1513219719.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:39.362Z,1513219719.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:39.565Z,1513219719.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:39.757Z,1513219719.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:39.815Z,1513219719.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:40.135Z,1513219720.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:40.152Z,1513219720.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:40.361Z,1513219720.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:40.519Z,1513219720.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:40.554Z,1513219720.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:40.918Z,1513219720.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:40.948Z,1513219720.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:41.159Z,1513219721.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:41.336Z,1513219721.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:41.352Z,1513219721.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:41.569Z,1513219721.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:41.739Z,1513219721.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:41.754Z,1513219721.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:42.134Z,1513219722.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:42.167Z,1513219722.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:42.365Z,1513219722.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:42.523Z,1513219722.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:42.550Z,1513219722.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:42.941Z,1513219722.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:42.968Z,1513219722.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:43.166Z,1513219723.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:43.320Z,1513219723.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:43.355Z,1513219723.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:43.573Z,1513219723.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:43.714Z,1513219723.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:43.755Z,1513219723.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:44.138Z,1513219724.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:44.164Z,1513219724.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:44.369Z,1513219724.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:44.549Z,1513219724.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:44.598Z,1513219724.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:44.952Z,1513219724.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:44.971Z,1513219724.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:45.165Z,1513219725.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:45.331Z,1513219725.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:45.358Z,1513219725.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:45.569Z,1513219725.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:45.724Z,1513219725.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:45.751Z,1513219725.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:46.180Z,1513219726.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:46.220Z,1513219726.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:46.365Z,1513219726.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:46.524Z,1513219726.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:46.551Z,1513219726.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:46.915Z,1513219726.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:46.958Z,1513219726.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:47.161Z,1513219727.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:47.335Z,1513219727.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:47.347Z,1513219727.347 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T02:48:47.378Z,1513219727.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:47.565Z,1513219727.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:47.737Z,1513219727.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:47.768Z,1513219727.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:48.134Z,1513219728.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:48.159Z,1513219728.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:48.361Z,1513219728.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:48.518Z,1513219728.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:48.555Z,1513219728.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:48.920Z,1513219728.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:48.928Z,1513219728.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x21136 got:0x7431
2017-12-14T02:48:48.967Z,1513219728.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:49.157Z,1513219729.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:49.350Z,1513219729.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:49.381Z,1513219729.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:49.561Z,1513219729.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:49.739Z,1513219729.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:49.767Z,1513219729.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:50.137Z,1513219730.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:50.168Z,1513219730.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:50.357Z,1513219730.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:50.573Z,1513219730.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:50.670Z,1513219730.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:50.951Z,1513219730.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:50.966Z,1513219730.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:51.153Z,1513219731.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:51.328Z,1513219731.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:51.364Z,1513219731.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:51.557Z,1513219731.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:51.728Z,1513219731.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:51.779Z,1513219731.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:52.128Z,1513219732.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:52.164Z,1513219732.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:52.353Z,1513219732.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:52.563Z,1513219732.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:52.626Z,1513219732.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:52.925Z,1513219732.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:52.962Z,1513219732.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:53.150Z,1513219733.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:53.340Z,1513219733.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:53.367Z,1513219733.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:53.553Z,1513219733.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:53.750Z,1513219733.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:53.764Z,1513219733.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:54.132Z,1513219734.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:54.161Z,1513219734.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:54.350Z,1513219734.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:54.526Z,1513219734.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:54.540Z,1513219734.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:54.919Z,1513219734.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:54.941Z,1513219734.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:55.152Z,1513219735.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:55.330Z,1513219735.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:55.345Z,1513219735.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:55.569Z,1513219735.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:55.771Z,1513219735.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:55.799Z,1513219735.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:56.129Z,1513219736.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:56.144Z,1513219736.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:56.365Z,1513219736.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:56.539Z,1513219736.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:56.555Z,1513219736.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:56.938Z,1513219736.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:56.954Z,1513219736.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:57.173Z,1513219737.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:57.335Z,1513219737.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:57.355Z,1513219737.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:57.581Z,1513219737.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:57.731Z,1513219737.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:57.746Z,1513219737.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:58.131Z,1513219738.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:58.146Z,1513219738.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:58.377Z,1513219738.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:58.536Z,1513219738.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:58.550Z,1513219738.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:58.938Z,1513219738.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:58.985Z,1513219738.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:59.173Z,1513219739.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:59.345Z,1513219739.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:59.367Z,1513219739.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:59.577Z,1513219739.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:59.748Z,1513219739.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:48:59.764Z,1513219739.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:48:59.767Z,1513219739.767 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:48:59.767Z,1513219739.767 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:48:59.767Z,1513219739.767 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:48:59.767Z,1513219739.767 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:49:00.142Z,1513219740.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:00.163Z,1513219740.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:00.166Z,1513219740.166 [Default:CheckIn:D] Stopped
2017-12-14T02:49:00.166Z,1513219740.166 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:49:00.376Z,1513219740.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:00.533Z,1513219740.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:00.547Z,1513219740.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 135.746273 min 
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn:E] Stopped
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn] Stopped
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:49:00.551Z,1513219740.551 [Default:CheckIn](INFO): Running loop #14
2017-12-14T02:49:00.552Z,1513219740.552 [Default:CheckIn] Running Loop=14
2017-12-14T02:49:00.552Z,1513219740.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:49:00.552Z,1513219740.552 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:49:00.921Z,1513219740.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:00.987Z,1513219740.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:01.000Z,1513219741.000 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:49:01.169Z,1513219741.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:01.320Z,1513219741.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:01.356Z,1513219741.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:01.573Z,1513219741.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:02.369Z,1513219742.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:03.165Z,1513219743.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:03.569Z,1513219743.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:04.365Z,1513219744.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:04.723Z,1513219744.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:04.746Z,1513219744.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:04.895Z,1513219744.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:04.938Z,1513219744.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:05.161Z,1513219745.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:05.221Z,1513219745.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:05.255Z,1513219745.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:05.565Z,1513219745.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:05.627Z,1513219745.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:05.642Z,1513219745.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:05.988Z,1513219745.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:06.023Z,1513219746.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:06.361Z,1513219746.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:06.399Z,1513219746.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:06.435Z,1513219746.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:06.794Z,1513219746.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:06.865Z,1513219746.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:07.158Z,1513219747.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:07.210Z,1513219747.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:07.231Z,1513219747.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:07.561Z,1513219747.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:07.616Z,1513219747.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:07.631Z,1513219747.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:08.014Z,1513219748.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:08.031Z,1513219748.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:08.357Z,1513219748.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:08.409Z,1513219748.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:08.425Z,1513219748.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:08.803Z,1513219748.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:08.818Z,1513219748.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:09.154Z,1513219749.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:09.218Z,1513219749.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:09.255Z,1513219749.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:09.581Z,1513219749.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:09.597Z,1513219749.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:09.638Z,1513219749.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:09.997Z,1513219749.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:10.031Z,1513219750.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:10.377Z,1513219750.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:10.422Z,1513219750.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:10.436Z,1513219750.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:10.816Z,1513219750.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:10.837Z,1513219750.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:11.174Z,1513219751.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:11.225Z,1513219751.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:11.252Z,1513219751.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:11.581Z,1513219751.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:11.626Z,1513219751.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:11.649Z,1513219751.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:12.011Z,1513219752.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:12.059Z,1513219752.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:12.377Z,1513219752.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:12.408Z,1513219752.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:12.423Z,1513219752.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:12.862Z,1513219752.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:12.907Z,1513219752.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:13.173Z,1513219753.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:13.210Z,1513219753.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:13.278Z,1513219753.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:13.577Z,1513219753.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:13.609Z,1513219753.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:13.640Z,1513219753.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:14.005Z,1513219754.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:14.038Z,1513219754.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:14.373Z,1513219754.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:14.399Z,1513219754.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:14.459Z,1513219754.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:14.881Z,1513219754.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:14.960Z,1513219754.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:15.169Z,1513219755.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:15.208Z,1513219755.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:15.259Z,1513219755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:15.573Z,1513219755.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:15.613Z,1513219755.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:15.627Z,1513219755.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:16.008Z,1513219756.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:16.023Z,1513219756.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:16.369Z,1513219756.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:16.416Z,1513219756.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:16.431Z,1513219756.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:16.860Z,1513219756.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:16.887Z,1513219756.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:17.178Z,1513219757.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:17.210Z,1513219757.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:17.236Z,1513219757.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:17.581Z,1513219757.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:17.607Z,1513219757.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:17.621Z,1513219757.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:17.996Z,1513219757.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:18.023Z,1513219758.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:18.377Z,1513219758.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:18.412Z,1513219758.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:18.431Z,1513219758.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:18.868Z,1513219758.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:18.895Z,1513219758.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:19.173Z,1513219759.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:19.214Z,1513219759.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:19.244Z,1513219759.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:19.577Z,1513219759.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:19.617Z,1513219759.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:19.639Z,1513219759.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:20.018Z,1513219760.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:20.032Z,1513219760.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:20.375Z,1513219760.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:20.389Z,1513219760.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:20.405Z,1513219760.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:20.802Z,1513219760.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:20.910Z,1513219760.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:21.169Z,1513219761.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:21.236Z,1513219761.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:21.263Z,1513219761.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:21.573Z,1513219761.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:21.607Z,1513219761.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:21.634Z,1513219761.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:22.002Z,1513219762.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:22.034Z,1513219762.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:22.369Z,1513219762.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:22.436Z,1513219762.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:22.450Z,1513219762.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:22.806Z,1513219762.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:22.839Z,1513219762.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:23.182Z,1513219763.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:23.240Z,1513219763.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:23.287Z,1513219763.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:23.588Z,1513219763.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:23.599Z,1513219763.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:23.640Z,1513219763.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:23.995Z,1513219763.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:24.031Z,1513219764.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:24.381Z,1513219764.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:24.416Z,1513219764.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:24.451Z,1513219764.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:24.806Z,1513219764.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:24.837Z,1513219764.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:25.178Z,1513219765.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:25.240Z,1513219765.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:25.258Z,1513219765.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:25.585Z,1513219765.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:25.614Z,1513219765.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:25.643Z,1513219765.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:26.013Z,1513219766.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:26.040Z,1513219766.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:26.382Z,1513219766.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:26.393Z,1513219766.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:26.423Z,1513219766.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:26.852Z,1513219766.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:26.887Z,1513219766.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:27.178Z,1513219767.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:27.195Z,1513219767.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:27.223Z,1513219767.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:27.581Z,1513219767.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:27.629Z,1513219767.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:27.674Z,1513219767.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:28.008Z,1513219768.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:28.032Z,1513219768.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:28.377Z,1513219768.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:28.409Z,1513219768.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:28.440Z,1513219768.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:28.849Z,1513219768.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:28.890Z,1513219768.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:29.173Z,1513219769.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:29.220Z,1513219769.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:29.235Z,1513219769.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:29.577Z,1513219769.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:29.600Z,1513219769.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:29.633Z,1513219769.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:30.000Z,1513219770.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:30.028Z,1513219770.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:30.373Z,1513219770.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:30.413Z,1513219770.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:30.429Z,1513219770.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:30.872Z,1513219770.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:30.934Z,1513219770.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:31.169Z,1513219771.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:31.220Z,1513219771.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:31.235Z,1513219771.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:31.573Z,1513219771.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:31.623Z,1513219771.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:31.643Z,1513219771.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:32.019Z,1513219772.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:32.039Z,1513219772.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:32.369Z,1513219772.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:32.410Z,1513219772.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:32.425Z,1513219772.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:32.869Z,1513219772.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:32.912Z,1513219772.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:33.174Z,1513219773.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:33.199Z,1513219773.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:33.235Z,1513219773.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:33.577Z,1513219773.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:33.596Z,1513219773.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:33.611Z,1513219773.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:34.001Z,1513219774.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:34.047Z,1513219774.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:34.373Z,1513219774.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:34.421Z,1513219774.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:34.446Z,1513219774.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:34.819Z,1513219774.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:34.907Z,1513219774.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:35.169Z,1513219775.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:35.216Z,1513219775.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:35.267Z,1513219775.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:35.573Z,1513219775.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:35.613Z,1513219775.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:35.627Z,1513219775.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:36.009Z,1513219776.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:36.066Z,1513219776.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:36.370Z,1513219776.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:36.395Z,1513219776.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:36.423Z,1513219776.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:36.803Z,1513219776.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:36.855Z,1513219776.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:37.174Z,1513219777.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:37.237Z,1513219777.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:37.284Z,1513219777.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:37.589Z,1513219777.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:37.609Z,1513219777.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:37.635Z,1513219777.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:38.009Z,1513219778.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:38.043Z,1513219778.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:38.386Z,1513219778.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:38.395Z,1513219778.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:38.410Z,1513219778.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:38.796Z,1513219778.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:38.812Z,1513219778.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:39.181Z,1513219779.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:39.219Z,1513219779.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:39.268Z,1513219779.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:39.585Z,1513219779.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:39.604Z,1513219779.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:39.643Z,1513219779.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:40.002Z,1513219780.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:40.018Z,1513219780.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:40.381Z,1513219780.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:40.414Z,1513219780.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:40.464Z,1513219780.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:40.867Z,1513219780.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:40.906Z,1513219780.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:41.177Z,1513219781.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:41.212Z,1513219781.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:41.239Z,1513219781.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:41.582Z,1513219781.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:41.609Z,1513219781.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:41.623Z,1513219781.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:42.002Z,1513219782.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:42.022Z,1513219782.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:42.377Z,1513219782.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:42.403Z,1513219782.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:42.434Z,1513219782.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:42.867Z,1513219782.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:42.889Z,1513219782.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:43.173Z,1513219783.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:43.210Z,1513219783.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:43.242Z,1513219783.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:43.577Z,1513219783.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:43.666Z,1513219783.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:43.690Z,1513219783.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:44.019Z,1513219784.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:44.039Z,1513219784.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:44.373Z,1513219784.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:44.394Z,1513219784.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:44.418Z,1513219784.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:44.873Z,1513219784.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:44.944Z,1513219784.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:45.169Z,1513219785.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:45.195Z,1513219785.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:45.231Z,1513219785.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:45.573Z,1513219785.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:45.600Z,1513219785.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:45.615Z,1513219785.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:45.999Z,1513219785.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:46.013Z,1513219786.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:46.369Z,1513219786.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:46.418Z,1513219786.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:46.450Z,1513219786.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:46.911Z,1513219786.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:46.934Z,1513219786.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:47.187Z,1513219787.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:47.239Z,1513219787.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:47.283Z,1513219787.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:47.590Z,1513219787.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:47.603Z,1513219787.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:47.618Z,1513219787.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:47.997Z,1513219787.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:48.012Z,1513219788.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:48.386Z,1513219788.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:48.401Z,1513219788.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:48.416Z,1513219788.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:48.800Z,1513219788.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:48.814Z,1513219788.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:49.181Z,1513219789.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:49.213Z,1513219789.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:49.235Z,1513219789.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:49.585Z,1513219789.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:49.622Z,1513219789.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:49.643Z,1513219789.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:50.018Z,1513219790.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:50.033Z,1513219790.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:50.385Z,1513219790.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:50.396Z,1513219790.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:50.427Z,1513219790.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:50.794Z,1513219790.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:50.810Z,1513219790.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:51.181Z,1513219791.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:51.225Z,1513219791.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:51.254Z,1513219791.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:51.585Z,1513219791.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:51.604Z,1513219791.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:51.619Z,1513219791.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:52.001Z,1513219792.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:52.015Z,1513219792.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:52.381Z,1513219792.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:52.413Z,1513219792.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:52.446Z,1513219792.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:52.818Z,1513219792.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:52.843Z,1513219792.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:53.178Z,1513219793.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:53.255Z,1513219793.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:53.319Z,1513219793.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:53.584Z,1513219793.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:53.606Z,1513219793.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:53.628Z,1513219793.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:54.002Z,1513219794.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:54.016Z,1513219794.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:54.377Z,1513219794.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:54.399Z,1513219794.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:54.434Z,1513219794.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:54.874Z,1513219794.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:54.894Z,1513219794.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:55.173Z,1513219795.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:55.210Z,1513219795.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:55.275Z,1513219795.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:55.577Z,1513219795.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:55.613Z,1513219795.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:55.640Z,1513219795.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:56.013Z,1513219796.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:56.035Z,1513219796.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:56.373Z,1513219796.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:56.403Z,1513219796.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:56.483Z,1513219796.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:56.867Z,1513219796.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:56.934Z,1513219796.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:57.169Z,1513219797.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:57.195Z,1513219797.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:57.240Z,1513219797.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:57.573Z,1513219797.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:57.599Z,1513219797.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:57.652Z,1513219797.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:57.998Z,1513219797.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:58.033Z,1513219798.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:58.369Z,1513219798.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:58.410Z,1513219798.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:58.471Z,1513219798.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:58.886Z,1513219798.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:58.900Z,1513219798.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:59.177Z,1513219799.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:59.220Z,1513219799.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:59.240Z,1513219799.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:49:59.581Z,1513219799.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:59.622Z,1513219799.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:49:59.644Z,1513219799.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:00.000Z,1513219800.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:00.019Z,1513219800.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:00.377Z,1513219800.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:00.402Z,1513219800.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:00.426Z,1513219800.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:00.868Z,1513219800.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:00.922Z,1513219800.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:01.173Z,1513219801.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:01.214Z,1513219801.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:01.241Z,1513219801.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:01.578Z,1513219801.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:01.628Z,1513219801.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:01.642Z,1513219801.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:02.373Z,1513219802.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:03.169Z,1513219803.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:03.573Z,1513219803.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:04.369Z,1513219804.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.001Z,1513219805.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.027Z,1513219805.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:05.166Z,1513219805.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.173Z,1513219805.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.232Z,1513219805.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:05.486Z,1513219805.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.501Z,1513219805.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:05.597Z,1513219805.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.890Z,1513219805.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:05.905Z,1513219805.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:06.296Z,1513219806.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:06.331Z,1513219806.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:06.393Z,1513219806.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:06.683Z,1513219806.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:06.732Z,1513219806.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:07.089Z,1513219807.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:07.104Z,1513219807.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:07.190Z,1513219807.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:07.494Z,1513219807.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:07.509Z,1513219807.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:07.593Z,1513219807.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:07.890Z,1513219807.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:07.911Z,1513219807.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:08.291Z,1513219808.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:08.305Z,1513219808.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:08.389Z,1513219808.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:08.684Z,1513219808.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:08.699Z,1513219808.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:09.093Z,1513219809.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:09.111Z,1513219809.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:09.186Z,1513219809.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:09.498Z,1513219809.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:09.512Z,1513219809.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:09.589Z,1513219809.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:09.894Z,1513219809.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:09.909Z,1513219809.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:10.286Z,1513219810.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:10.302Z,1513219810.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:10.385Z,1513219810.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:10.679Z,1513219810.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:10.710Z,1513219810.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:11.092Z,1513219811.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:11.108Z,1513219811.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:11.181Z,1513219811.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:11.494Z,1513219811.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:11.510Z,1513219811.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:11.585Z,1513219811.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:11.893Z,1513219811.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:11.964Z,1513219811.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:12.317Z,1513219812.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:12.352Z,1513219812.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:12.381Z,1513219812.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:12.675Z,1513219812.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:12.709Z,1513219812.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:13.093Z,1513219813.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:13.115Z,1513219813.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:13.179Z,1513219813.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:13.496Z,1513219813.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:13.511Z,1513219813.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:13.585Z,1513219813.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:13.892Z,1513219813.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:13.914Z,1513219813.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:14.289Z,1513219814.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:14.303Z,1513219814.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:14.381Z,1513219814.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:14.688Z,1513219814.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:14.703Z,1513219814.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:15.093Z,1513219815.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:15.108Z,1513219815.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:15.178Z,1513219815.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:15.539Z,1513219815.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:15.581Z,1513219815.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:15.595Z,1513219815.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:15.892Z,1513219815.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:15.907Z,1513219815.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:16.275Z,1513219816.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:16.309Z,1513219816.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:16.379Z,1513219816.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:16.675Z,1513219816.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:16.702Z,1513219816.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:17.096Z,1513219817.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:17.158Z,1513219817.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:17.174Z,1513219817.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:17.496Z,1513219817.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:17.516Z,1513219817.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:17.577Z,1513219817.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:17.894Z,1513219817.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:17.910Z,1513219817.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:18.279Z,1513219818.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:18.347Z,1513219818.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:18.374Z,1513219818.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:18.694Z,1513219818.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:18.748Z,1513219818.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:19.107Z,1513219819.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:19.171Z,1513219819.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:19.191Z,1513219819.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:19.494Z,1513219819.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:19.520Z,1513219819.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:19.597Z,1513219819.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:19.900Z,1513219819.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:19.915Z,1513219819.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:20.283Z,1513219820.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:20.314Z,1513219820.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:20.395Z,1513219820.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:20.673Z,1513219820.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:20.696Z,1513219820.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:21.097Z,1513219821.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:21.176Z,1513219821.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:21.189Z,1513219821.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:21.498Z,1513219821.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:21.518Z,1513219821.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:21.593Z,1513219821.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:21.935Z,1513219821.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:22.010Z,1513219822.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:22.274Z,1513219822.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:22.311Z,1513219822.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:22.390Z,1513219822.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:22.674Z,1513219822.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:22.712Z,1513219822.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:23.075Z,1513219823.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:23.107Z,1513219823.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:23.186Z,1513219823.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:23.480Z,1513219823.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:23.503Z,1513219823.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:23.589Z,1513219823.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:23.883Z,1513219823.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:23.920Z,1513219823.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:24.281Z,1513219824.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:24.316Z,1513219824.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:24.386Z,1513219824.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:24.697Z,1513219824.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:24.720Z,1513219824.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:25.123Z,1513219825.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:25.175Z,1513219825.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:25.181Z,1513219825.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:25.485Z,1513219825.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:25.500Z,1513219825.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:25.586Z,1513219825.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:25.884Z,1513219825.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:25.899Z,1513219825.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:26.281Z,1513219826.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:26.295Z,1513219826.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:26.381Z,1513219826.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:26.678Z,1513219826.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:26.694Z,1513219826.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:27.097Z,1513219827.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:27.128Z,1513219827.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:27.177Z,1513219827.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:27.498Z,1513219827.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:27.547Z,1513219827.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:27.581Z,1513219827.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:27.894Z,1513219827.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:27.908Z,1513219827.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:28.284Z,1513219828.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:28.338Z,1513219828.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:28.377Z,1513219828.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:28.678Z,1513219828.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:28.703Z,1513219828.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:29.088Z,1513219829.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:29.108Z,1513219829.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:29.173Z,1513219829.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:29.489Z,1513219829.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:29.504Z,1513219829.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:29.577Z,1513219829.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:29.890Z,1513219829.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:29.905Z,1513219829.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:30.280Z,1513219830.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:30.302Z,1513219830.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:30.373Z,1513219830.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:30.675Z,1513219830.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:30.718Z,1513219830.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:31.095Z,1513219831.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:31.123Z,1513219831.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:31.169Z,1513219831.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:31.532Z,1513219831.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:31.574Z,1513219831.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:31.576Z,1513219831.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:31.897Z,1513219831.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:31.926Z,1513219831.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:32.282Z,1513219832.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:32.297Z,1513219832.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:32.369Z,1513219832.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:32.681Z,1513219832.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:32.696Z,1513219832.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:33.089Z,1513219833.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:33.104Z,1513219833.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:33.167Z,1513219833.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:33.496Z,1513219833.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:33.523Z,1513219833.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:33.581Z,1513219833.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:33.894Z,1513219833.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:33.918Z,1513219833.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:34.282Z,1513219834.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:34.313Z,1513219834.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:34.377Z,1513219834.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:34.714Z,1513219834.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:34.746Z,1513219834.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:35.106Z,1513219835.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:35.175Z,1513219835.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:35.212Z,1513219835.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:35.491Z,1513219835.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:35.523Z,1513219835.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:35.581Z,1513219835.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:35.891Z,1513219835.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:35.918Z,1513219835.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:36.275Z,1513219836.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:36.291Z,1513219836.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:36.377Z,1513219836.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:36.682Z,1513219836.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:36.717Z,1513219836.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:37.086Z,1513219837.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:37.117Z,1513219837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:37.173Z,1513219837.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:37.489Z,1513219837.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:37.516Z,1513219837.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:37.577Z,1513219837.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:37.934Z,1513219837.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:38.022Z,1513219838.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:38.283Z,1513219838.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:38.339Z,1513219838.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:38.373Z,1513219838.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:38.681Z,1513219838.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:38.696Z,1513219838.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:39.085Z,1513219839.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:39.126Z,1513219839.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:39.170Z,1513219839.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:39.484Z,1513219839.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:39.499Z,1513219839.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:39.573Z,1513219839.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:39.874Z,1513219839.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:39.925Z,1513219839.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:40.302Z,1513219840.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:40.317Z,1513219840.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:40.369Z,1513219840.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:40.703Z,1513219840.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:40.717Z,1513219840.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:41.104Z,1513219841.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:41.135Z,1513219841.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:41.165Z,1513219841.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:41.486Z,1513219841.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:41.507Z,1513219841.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:41.507Z,1513219841.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2017-12-14T02:50:41.507Z,1513219841.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:50:41.525Z,1513219841.525 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:41.525Z,1513219841.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2017-12-14T02:50:41.525Z,1513219841.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:50:41.527Z,1513219841.527 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:41.527Z,1513219841.527 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2017-12-14T02:50:41.527Z,1513219841.527 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:50:41.556Z,1513219841.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:50:41.556Z,1513219841.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:50:41.561Z,1513219841.561 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:50:41.570Z,1513219841.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:41.878Z,1513219841.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:41.924Z,1513219841.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:50:41.924Z,1513219841.924 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2017-12-14T02:50:41.929Z,1513219841.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:50:41.929Z,1513219841.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2017-12-14T02:50:41.929Z,1513219841.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:50:41.929Z,1513219841.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2017-12-14T02:50:42.279Z,1513219842.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:42.311Z,1513219842.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:50:42.312Z,1513219842.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:50:42.312Z,1513219842.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:50:42.313Z,1513219842.313 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:50:42.313Z,1513219842.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:50:42.313Z,1513219842.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:50:42.314Z,1513219842.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:50:42.314Z,1513219842.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:50:42.315Z,1513219842.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:50:42.366Z,1513219842.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:42.682Z,1513219842.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:42.698Z,1513219842.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:43.097Z,1513219843.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:43.111Z,1513219843.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:43.161Z,1513219843.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:43.502Z,1513219843.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:43.523Z,1513219843.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:43.565Z,1513219843.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:43.901Z,1513219843.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:43.916Z,1513219843.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:44.314Z,1513219844.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:44.350Z,1513219844.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:44.362Z,1513219844.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:44.675Z,1513219844.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:44.714Z,1513219844.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:45.094Z,1513219845.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:45.115Z,1513219845.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:45.157Z,1513219845.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:45.503Z,1513219845.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:45.520Z,1513219845.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:45.561Z,1513219845.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:45.903Z,1513219845.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:45.924Z,1513219845.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:46.280Z,1513219846.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:46.307Z,1513219846.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:46.357Z,1513219846.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:46.679Z,1513219846.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:46.708Z,1513219846.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:47.094Z,1513219847.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:47.112Z,1513219847.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:47.155Z,1513219847.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:47.538Z,1513219847.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:47.577Z,1513219847.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:47.593Z,1513219847.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:47.890Z,1513219847.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:47.904Z,1513219847.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:48.281Z,1513219848.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:48.331Z,1513219848.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:48.389Z,1513219848.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:48.682Z,1513219848.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:48.697Z,1513219848.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:49.090Z,1513219849.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:49.107Z,1513219849.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:49.185Z,1513219849.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:49.497Z,1513219849.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:49.513Z,1513219849.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:49.593Z,1513219849.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:49.905Z,1513219849.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:49.919Z,1513219849.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:50.279Z,1513219850.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:50.306Z,1513219850.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:50.389Z,1513219850.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:50.694Z,1513219850.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:50.739Z,1513219850.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:51.105Z,1513219851.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:51.135Z,1513219851.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:51.186Z,1513219851.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:51.493Z,1513219851.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:51.508Z,1513219851.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:51.589Z,1513219851.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:51.891Z,1513219851.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:51.908Z,1513219851.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:52.287Z,1513219852.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:52.302Z,1513219852.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:52.385Z,1513219852.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:52.680Z,1513219852.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:52.701Z,1513219852.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:53.093Z,1513219853.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:53.158Z,1513219853.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:53.182Z,1513219853.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:53.496Z,1513219853.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:53.519Z,1513219853.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:53.585Z,1513219853.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:53.894Z,1513219853.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:53.909Z,1513219853.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:54.275Z,1513219854.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:54.300Z,1513219854.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:54.382Z,1513219854.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:54.674Z,1513219854.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:54.699Z,1513219854.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:55.095Z,1513219855.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:55.115Z,1513219855.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:55.177Z,1513219855.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:55.494Z,1513219855.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:55.517Z,1513219855.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:55.581Z,1513219855.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:55.903Z,1513219855.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:55.931Z,1513219855.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:56.276Z,1513219856.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:56.290Z,1513219856.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:56.377Z,1513219856.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:56.672Z,1513219856.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:56.713Z,1513219856.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:57.125Z,1513219857.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:57.149Z,1513219857.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:57.173Z,1513219857.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:57.497Z,1513219857.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:57.529Z,1513219857.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:57.577Z,1513219857.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:57.897Z,1513219857.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:57.927Z,1513219857.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:58.282Z,1513219858.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:58.304Z,1513219858.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:58.373Z,1513219858.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:58.683Z,1513219858.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:58.698Z,1513219858.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:59.102Z,1513219859.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:59.126Z,1513219859.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:59.169Z,1513219859.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:59.489Z,1513219859.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:59.542Z,1513219859.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:50:59.573Z,1513219859.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:59.893Z,1513219859.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:50:59.949Z,1513219859.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:00.295Z,1513219860.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:00.359Z,1513219860.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:00.377Z,1513219860.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:00.682Z,1513219860.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:00.703Z,1513219860.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:01.097Z,1513219861.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:01.175Z,1513219861.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:01.198Z,1513219861.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:01.498Z,1513219861.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:01.519Z,1513219861.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:01.593Z,1513219861.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:01.903Z,1513219861.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:01.917Z,1513219861.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:02.389Z,1513219862.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:03.185Z,1513219863.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:03.589Z,1513219863.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:04.385Z,1513219864.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.185Z,1513219865.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.372Z,1513219865.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.401Z,1513219865.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:05.504Z,1513219865.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.551Z,1513219865.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:05.589Z,1513219865.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.857Z,1513219865.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:05.872Z,1513219865.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:06.266Z,1513219866.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:06.280Z,1513219866.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:06.385Z,1513219866.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:06.701Z,1513219866.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:06.731Z,1513219866.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:07.052Z,1513219867.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:07.091Z,1513219867.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:07.182Z,1513219867.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:07.456Z,1513219867.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:07.486Z,1513219867.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:07.585Z,1513219867.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:07.851Z,1513219867.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:07.871Z,1513219867.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:08.265Z,1513219868.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:08.298Z,1513219868.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:08.381Z,1513219868.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:08.665Z,1513219868.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:08.696Z,1513219868.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:09.071Z,1513219869.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:09.100Z,1513219869.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:09.177Z,1513219869.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:09.457Z,1513219869.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:09.506Z,1513219869.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:09.581Z,1513219869.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:09.852Z,1513219869.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:09.875Z,1513219869.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:10.255Z,1513219870.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:10.275Z,1513219870.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:10.377Z,1513219870.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:10.657Z,1513219870.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:10.671Z,1513219870.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:11.056Z,1513219871.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:11.074Z,1513219871.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:11.173Z,1513219871.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:11.458Z,1513219871.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:11.474Z,1513219871.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:11.577Z,1513219871.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:11.869Z,1513219871.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:11.892Z,1513219871.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:12.262Z,1513219872.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:12.277Z,1513219872.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:12.373Z,1513219872.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:12.659Z,1513219872.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:12.674Z,1513219872.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:13.088Z,1513219873.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:13.134Z,1513219873.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:13.170Z,1513219873.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:13.454Z,1513219873.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:13.477Z,1513219873.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:13.573Z,1513219873.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:13.854Z,1513219873.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:13.869Z,1513219873.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:14.277Z,1513219874.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:14.292Z,1513219874.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:14.369Z,1513219874.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:14.667Z,1513219874.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:14.687Z,1513219874.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:15.066Z,1513219875.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:15.081Z,1513219875.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:15.167Z,1513219875.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:15.447Z,1513219875.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:15.483Z,1513219875.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:15.585Z,1513219875.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:15.848Z,1513219875.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:15.880Z,1513219875.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:16.276Z,1513219876.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:16.299Z,1513219876.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:16.382Z,1513219876.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:16.658Z,1513219876.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:16.685Z,1513219876.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:17.062Z,1513219877.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:17.095Z,1513219877.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:17.179Z,1513219877.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:17.465Z,1513219877.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:17.495Z,1513219877.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:17.585Z,1513219877.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:17.865Z,1513219877.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:17.892Z,1513219877.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:18.256Z,1513219878.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:18.287Z,1513219878.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:18.381Z,1513219878.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:18.660Z,1513219878.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:18.706Z,1513219878.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:19.111Z,1513219879.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:19.139Z,1513219879.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:19.177Z,1513219879.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:19.502Z,1513219879.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:19.547Z,1513219879.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:19.589Z,1513219879.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:19.864Z,1513219879.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:19.901Z,1513219879.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:20.269Z,1513219880.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:20.336Z,1513219880.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:20.385Z,1513219880.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:20.648Z,1513219880.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:20.698Z,1513219880.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:21.089Z,1513219881.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:21.132Z,1513219881.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:21.182Z,1513219881.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:21.488Z,1513219881.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:21.548Z,1513219881.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:21.585Z,1513219881.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:21.860Z,1513219881.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:21.927Z,1513219881.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:22.248Z,1513219882.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:22.293Z,1513219882.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:22.382Z,1513219882.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:22.649Z,1513219882.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:22.664Z,1513219882.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:23.047Z,1513219883.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:23.110Z,1513219883.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:23.178Z,1513219883.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:23.485Z,1513219883.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:23.504Z,1513219883.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:23.581Z,1513219883.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:23.874Z,1513219883.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:23.948Z,1513219883.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:24.267Z,1513219884.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:24.284Z,1513219884.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:24.378Z,1513219884.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:24.647Z,1513219884.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:24.678Z,1513219884.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:25.049Z,1513219885.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:25.129Z,1513219885.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:25.174Z,1513219885.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:25.454Z,1513219885.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:25.515Z,1513219885.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:25.577Z,1513219885.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:25.848Z,1513219885.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:25.868Z,1513219885.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:26.302Z,1513219886.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:26.328Z,1513219886.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:26.373Z,1513219886.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:26.669Z,1513219886.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:26.723Z,1513219886.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:27.058Z,1513219887.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:27.072Z,1513219887.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:27.170Z,1513219887.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:27.476Z,1513219887.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:27.503Z,1513219887.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:27.573Z,1513219887.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:27.858Z,1513219887.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:27.874Z,1513219887.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:28.250Z,1513219888.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:28.280Z,1513219888.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:28.370Z,1513219888.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:28.658Z,1513219888.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:28.680Z,1513219888.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:29.067Z,1513219889.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:29.092Z,1513219889.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:29.167Z,1513219889.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:29.439Z,1513219889.439 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T02:51:29.439Z,1513219889.439 [NAL9602] Data Fault, FailCount= 3
2017-12-14T02:51:29.439Z,1513219889.439 [NAL9602](ERROR): Data Fault
2017-12-14T02:51:29.458Z,1513219889.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:29.533Z,1513219889.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:29.564Z,1513219889.564 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T02:51:29.613Z,1513219889.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:29.831Z,1513219889.831 [NAL9602](INFO): Powering down
2017-12-14T02:51:29.861Z,1513219889.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:29.960Z,1513219889.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:30.259Z,1513219890.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:30.338Z,1513219890.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:30.409Z,1513219890.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:30.647Z,1513219890.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:30.683Z,1513219890.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:30.731Z,1513219890.731 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T02:51:30.731Z,1513219890.731 [NAL9602] No Fault, FailCount= 3
2017-12-14T02:51:31.057Z,1513219891.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:31.167Z,1513219891.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:31.206Z,1513219891.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:31.449Z,1513219891.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:31.515Z,1513219891.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:31.609Z,1513219891.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:31.848Z,1513219891.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:31.887Z,1513219891.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:32.248Z,1513219892.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:32.296Z,1513219892.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:32.408Z,1513219892.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:32.648Z,1513219892.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:32.761Z,1513219892.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:33.054Z,1513219893.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:33.093Z,1513219893.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:33.202Z,1513219893.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:33.457Z,1513219893.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:33.502Z,1513219893.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:33.605Z,1513219893.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:33.857Z,1513219893.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:33.910Z,1513219893.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:34.257Z,1513219894.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:34.284Z,1513219894.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:34.401Z,1513219894.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:34.655Z,1513219894.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:34.724Z,1513219894.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:35.052Z,1513219895.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:35.094Z,1513219895.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:35.198Z,1513219895.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:35.458Z,1513219895.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:35.521Z,1513219895.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:35.602Z,1513219895.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:35.857Z,1513219895.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:35.887Z,1513219895.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:36.257Z,1513219896.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:36.307Z,1513219896.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:36.398Z,1513219896.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:36.886Z,1513219896.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:36.934Z,1513219896.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:37.058Z,1513219897.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:37.078Z,1513219897.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:37.196Z,1513219897.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:37.455Z,1513219897.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:37.480Z,1513219897.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:37.601Z,1513219897.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:37.856Z,1513219897.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:37.875Z,1513219897.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:38.256Z,1513219898.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:38.311Z,1513219898.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:38.398Z,1513219898.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:38.657Z,1513219898.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:38.713Z,1513219898.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:39.078Z,1513219899.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:39.130Z,1513219899.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:39.194Z,1513219899.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:39.472Z,1513219899.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:39.505Z,1513219899.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:39.597Z,1513219899.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:39.865Z,1513219899.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:39.880Z,1513219899.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:40.256Z,1513219900.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:40.279Z,1513219900.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:40.393Z,1513219900.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:40.660Z,1513219900.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:40.701Z,1513219900.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:41.056Z,1513219901.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:41.071Z,1513219901.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:41.189Z,1513219901.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:41.465Z,1513219901.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:41.483Z,1513219901.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:41.854Z,1513219901.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:41.869Z,1513219901.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:41.985Z,1513219901.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:42.254Z,1513219902.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:42.268Z,1513219902.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:42.654Z,1513219902.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:42.675Z,1513219902.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:42.781Z,1513219902.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:43.055Z,1513219903.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:43.166Z,1513219903.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:43.457Z,1513219903.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:43.486Z,1513219903.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:43.577Z,1513219903.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:43.855Z,1513219903.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:43.885Z,1513219903.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:43.981Z,1513219903.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:44.254Z,1513219904.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:44.291Z,1513219904.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:44.652Z,1513219904.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:44.706Z,1513219904.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:44.777Z,1513219904.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:45.054Z,1513219905.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:45.077Z,1513219905.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:45.455Z,1513219905.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:45.503Z,1513219905.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:45.565Z,1513219905.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:45.860Z,1513219905.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:45.875Z,1513219905.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:46.254Z,1513219906.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:46.315Z,1513219906.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:46.361Z,1513219906.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:46.654Z,1513219906.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:46.668Z,1513219906.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:47.055Z,1513219907.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:47.075Z,1513219907.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:47.157Z,1513219907.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:47.449Z,1513219907.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:47.479Z,1513219907.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:47.561Z,1513219907.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:47.867Z,1513219907.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:47.881Z,1513219907.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:48.244Z,1513219908.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:48.275Z,1513219908.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:48.357Z,1513219908.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:48.647Z,1513219908.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:48.675Z,1513219908.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:49.055Z,1513219909.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:49.075Z,1513219909.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:49.153Z,1513219909.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:49.456Z,1513219909.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:49.479Z,1513219909.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:49.557Z,1513219909.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:49.842Z,1513219909.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:49.873Z,1513219909.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:50.247Z,1513219910.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:50.274Z,1513219910.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:50.353Z,1513219910.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:50.647Z,1513219910.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:50.675Z,1513219910.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:51.047Z,1513219911.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:51.076Z,1513219911.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:51.151Z,1513219911.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:51.446Z,1513219911.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:51.481Z,1513219911.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:51.557Z,1513219911.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:51.859Z,1513219911.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:51.874Z,1513219911.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:52.242Z,1513219912.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:52.270Z,1513219912.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:52.353Z,1513219912.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:52.647Z,1513219912.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:52.674Z,1513219912.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:53.046Z,1513219913.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:53.079Z,1513219913.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:53.151Z,1513219913.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:53.446Z,1513219913.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:53.481Z,1513219913.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:53.557Z,1513219913.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:53.846Z,1513219913.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:53.871Z,1513219913.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:54.243Z,1513219914.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:54.278Z,1513219914.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:54.353Z,1513219914.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:54.659Z,1513219914.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:54.719Z,1513219914.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:55.095Z,1513219915.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:55.131Z,1513219915.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:55.170Z,1513219915.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:55.466Z,1513219915.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:55.480Z,1513219915.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:55.573Z,1513219915.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:55.847Z,1513219915.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:55.930Z,1513219915.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:56.247Z,1513219916.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:56.273Z,1513219916.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:56.369Z,1513219916.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:56.651Z,1513219916.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:56.676Z,1513219916.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:57.046Z,1513219917.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:57.083Z,1513219917.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:57.167Z,1513219917.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:57.445Z,1513219917.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:57.460Z,1513219917.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:57.577Z,1513219917.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:57.846Z,1513219917.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:57.860Z,1513219917.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:58.281Z,1513219918.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:58.311Z,1513219918.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:58.374Z,1513219918.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:58.652Z,1513219918.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:58.693Z,1513219918.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:59.048Z,1513219919.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:59.063Z,1513219919.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:59.171Z,1513219919.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:59.454Z,1513219919.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:59.474Z,1513219919.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:51:59.581Z,1513219919.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:59.838Z,1513219919.838 [NAL9602](INFO): Powering up NAL9602
2017-12-14T02:51:59.865Z,1513219919.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:51:59.891Z,1513219919.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:00.240Z,1513219920.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:00.273Z,1513219920.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:00.377Z,1513219920.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:00.644Z,1513219920.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:00.667Z,1513219920.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:01.047Z,1513219921.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:01.073Z,1513219921.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:01.173Z,1513219921.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:01.502Z,1513219921.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:01.543Z,1513219921.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:01.577Z,1513219921.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:01.852Z,1513219921.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:01.884Z,1513219921.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:02.264Z,1513219922.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:02.292Z,1513219922.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:02.374Z,1513219922.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:03.169Z,1513219923.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:03.573Z,1513219923.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:04.371Z,1513219924.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:05.165Z,1513219925.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:05.571Z,1513219925.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.003Z,1513219926.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.049Z,1513219926.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:06.143Z,1513219926.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.210Z,1513219926.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:06.365Z,1513219926.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.522Z,1513219926.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.546Z,1513219926.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:06.919Z,1513219926.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:06.951Z,1513219926.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:07.161Z,1513219927.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:07.337Z,1513219927.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:07.391Z,1513219927.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:07.565Z,1513219927.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:07.740Z,1513219927.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:07.754Z,1513219927.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:08.122Z,1513219928.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:08.192Z,1513219928.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:08.361Z,1513219928.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:08.518Z,1513219928.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:08.552Z,1513219928.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:08.920Z,1513219928.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:08.958Z,1513219928.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:09.157Z,1513219929.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:09.320Z,1513219929.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:09.344Z,1513219929.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:09.561Z,1513219929.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:09.742Z,1513219929.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:09.757Z,1513219929.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:10.114Z,1513219930.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:10.147Z,1513219930.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:10.357Z,1513219930.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:10.563Z,1513219930.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:10.641Z,1513219930.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:10.892Z,1513219930.892 [NAL9602](INFO): NAL9602 initialized
2017-12-14T02:52:10.913Z,1513219930.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:10.955Z,1513219930.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:11.155Z,1513219931.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:11.323Z,1513219931.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:11.348Z,1513219931.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:11.565Z,1513219931.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:11.738Z,1513219931.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:11.756Z,1513219931.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:12.144Z,1513219932.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:12.159Z,1513219932.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:12.361Z,1513219932.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:12.553Z,1513219932.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:12.595Z,1513219932.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:12.919Z,1513219932.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:12.958Z,1513219932.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:13.159Z,1513219933.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:13.360Z,1513219933.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:13.375Z,1513219933.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:13.569Z,1513219933.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:13.727Z,1513219933.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:13.748Z,1513219933.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:14.159Z,1513219934.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:14.204Z,1513219934.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:14.365Z,1513219934.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:14.549Z,1513219934.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:14.564Z,1513219934.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:14.931Z,1513219934.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:14.961Z,1513219934.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:15.161Z,1513219935.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:15.328Z,1513219935.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:15.356Z,1513219935.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:15.565Z,1513219935.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:15.725Z,1513219935.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:15.739Z,1513219935.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:16.137Z,1513219936.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:16.169Z,1513219936.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:16.361Z,1513219936.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:16.539Z,1513219936.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:16.588Z,1513219936.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:16.938Z,1513219936.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:16.968Z,1513219936.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:17.157Z,1513219937.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:17.325Z,1513219937.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:17.391Z,1513219937.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:17.561Z,1513219937.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:17.718Z,1513219937.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:17.752Z,1513219937.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:18.115Z,1513219938.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:18.148Z,1513219938.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:18.358Z,1513219938.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:18.519Z,1513219938.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:18.545Z,1513219938.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:18.921Z,1513219938.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:18.948Z,1513219938.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:19.153Z,1513219939.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:19.342Z,1513219939.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:19.363Z,1513219939.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:19.557Z,1513219939.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:19.748Z,1513219939.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:19.767Z,1513219939.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:20.131Z,1513219940.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:20.166Z,1513219940.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:20.353Z,1513219940.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:20.561Z,1513219940.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:20.608Z,1513219940.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:20.923Z,1513219940.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:20.943Z,1513219940.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:21.149Z,1513219941.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:21.325Z,1513219941.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:21.357Z,1513219941.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:21.553Z,1513219941.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:21.721Z,1513219941.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:21.755Z,1513219941.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:22.126Z,1513219942.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:22.158Z,1513219942.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:22.350Z,1513219942.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:22.542Z,1513219942.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:22.556Z,1513219942.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:22.939Z,1513219942.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:22.954Z,1513219942.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:23.146Z,1513219943.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:23.321Z,1513219943.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:23.355Z,1513219943.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:23.549Z,1513219943.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:23.720Z,1513219943.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:23.751Z,1513219943.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:24.140Z,1513219944.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:24.155Z,1513219944.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:24.346Z,1513219944.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:24.551Z,1513219944.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:24.571Z,1513219944.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:24.925Z,1513219944.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:24.959Z,1513219944.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:25.143Z,1513219945.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:25.321Z,1513219945.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:25.350Z,1513219945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:25.561Z,1513219945.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:25.720Z,1513219945.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:25.751Z,1513219945.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:26.135Z,1513219946.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:26.161Z,1513219946.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:26.357Z,1513219946.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:26.546Z,1513219946.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:26.567Z,1513219946.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:26.940Z,1513219946.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:26.956Z,1513219946.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:27.156Z,1513219947.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:27.380Z,1513219947.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:27.435Z,1513219947.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:27.585Z,1513219947.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:27.719Z,1513219947.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:27.735Z,1513219947.735 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:52:27.736Z,1513219947.736 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:52:27.736Z,1513219947.736 [BPC1](ERROR): Data Fault
2017-12-14T02:52:27.760Z,1513219947.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:27.794Z,1513219947.794 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:52:28.127Z,1513219948.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:28.163Z,1513219948.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:28.381Z,1513219948.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:28.522Z,1513219948.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:28.536Z,1513219948.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:28.924Z,1513219948.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:28.940Z,1513219948.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:28.978Z,1513219948.978 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:52:28.978Z,1513219948.978 [BPC1] No Fault, FailCount= 1
2017-12-14T02:52:29.177Z,1513219949.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:29.338Z,1513219949.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:29.415Z,1513219949.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:29.581Z,1513219949.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:29.764Z,1513219949.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:29.779Z,1513219949.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:30.142Z,1513219950.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:30.165Z,1513219950.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:30.377Z,1513219950.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:30.536Z,1513219950.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:30.637Z,1513219950.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:30.926Z,1513219950.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:30.971Z,1513219950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:31.173Z,1513219951.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:31.324Z,1513219951.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:31.351Z,1513219951.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:31.577Z,1513219951.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:31.731Z,1513219951.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:31.768Z,1513219951.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:32.137Z,1513219952.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:32.152Z,1513219952.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:32.373Z,1513219952.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:32.531Z,1513219952.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:32.545Z,1513219952.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:32.929Z,1513219952.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:32.951Z,1513219952.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:33.169Z,1513219953.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:33.334Z,1513219953.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:33.349Z,1513219953.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:33.574Z,1513219953.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:33.724Z,1513219953.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:33.740Z,1513219953.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:34.134Z,1513219954.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:34.149Z,1513219954.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:34.369Z,1513219954.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:34.535Z,1513219954.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:34.549Z,1513219954.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:34.930Z,1513219954.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:34.955Z,1513219954.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:35.165Z,1513219955.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:35.334Z,1513219955.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:35.348Z,1513219955.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:35.569Z,1513219955.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:35.771Z,1513219955.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:35.833Z,1513219955.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:36.139Z,1513219956.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:36.162Z,1513219956.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:36.365Z,1513219956.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:36.535Z,1513219956.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:36.551Z,1513219956.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:36.937Z,1513219956.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:36.959Z,1513219956.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:37.164Z,1513219957.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:37.332Z,1513219957.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:37.355Z,1513219957.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:37.569Z,1513219957.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:37.735Z,1513219957.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:37.783Z,1513219957.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:38.135Z,1513219958.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:38.155Z,1513219958.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:38.365Z,1513219958.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:38.536Z,1513219958.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:38.552Z,1513219958.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:38.941Z,1513219958.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:38.960Z,1513219958.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:39.171Z,1513219959.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:39.319Z,1513219959.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:39.351Z,1513219959.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:39.577Z,1513219959.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:39.724Z,1513219959.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:39.799Z,1513219959.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:40.138Z,1513219960.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:40.153Z,1513219960.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:40.374Z,1513219960.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:40.549Z,1513219960.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:40.564Z,1513219960.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:40.951Z,1513219960.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:41.011Z,1513219961.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:41.171Z,1513219961.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:41.319Z,1513219961.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:41.344Z,1513219961.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:41.577Z,1513219961.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:41.717Z,1513219961.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:41.747Z,1513219961.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:42.119Z,1513219962.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:42.153Z,1513219962.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:42.374Z,1513219962.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:42.522Z,1513219962.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:42.555Z,1513219962.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:42.920Z,1513219962.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:42.989Z,1513219962.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:43.169Z,1513219963.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:43.338Z,1513219963.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:43.354Z,1513219963.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:43.573Z,1513219963.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:43.736Z,1513219963.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:43.806Z,1513219963.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:44.142Z,1513219964.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:44.157Z,1513219964.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:44.369Z,1513219964.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:44.523Z,1513219964.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:44.555Z,1513219964.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:44.920Z,1513219964.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:44.951Z,1513219964.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:45.165Z,1513219965.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:45.338Z,1513219965.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:45.363Z,1513219965.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:45.569Z,1513219965.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:45.728Z,1513219965.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:45.744Z,1513219965.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:46.177Z,1513219966.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:46.223Z,1513219966.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:46.365Z,1513219966.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:46.537Z,1513219966.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:46.564Z,1513219966.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:46.933Z,1513219966.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:46.948Z,1513219966.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:47.161Z,1513219967.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:47.330Z,1513219967.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:47.404Z,1513219967.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:47.730Z,1513219967.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:47.745Z,1513219967.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:47.937Z,1513219967.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:48.138Z,1513219968.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:48.171Z,1513219968.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:48.541Z,1513219968.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:48.572Z,1513219968.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:48.733Z,1513219968.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:48.932Z,1513219968.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:48.962Z,1513219968.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:49.209Z,1513219969.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:49.355Z,1513219969.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:49.391Z,1513219969.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:49.728Z,1513219969.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:49.779Z,1513219969.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:50.005Z,1513219970.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:50.130Z,1513219970.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:50.155Z,1513219970.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:50.543Z,1513219970.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:50.607Z,1513219970.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:50.801Z,1513219970.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:50.935Z,1513219970.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:50.979Z,1513219970.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:51.277Z,1513219971.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:51.326Z,1513219971.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:51.375Z,1513219971.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:51.726Z,1513219971.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:51.744Z,1513219971.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:52.073Z,1513219972.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:52.134Z,1513219972.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:52.167Z,1513219972.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:52.579Z,1513219972.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:52.618Z,1513219972.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:52.869Z,1513219972.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:52.941Z,1513219972.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:52.971Z,1513219972.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:53.330Z,1513219973.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:53.373Z,1513219973.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:53.553Z,1513219973.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:53.722Z,1513219973.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:53.763Z,1513219973.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:54.119Z,1513219974.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:54.151Z,1513219974.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:54.350Z,1513219974.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:54.536Z,1513219974.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:54.551Z,1513219974.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:54.915Z,1513219974.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:54.953Z,1513219974.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:55.149Z,1513219975.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:55.338Z,1513219975.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:55.346Z,1513219975.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x58687 got:0x42305
2017-12-14T02:52:55.392Z,1513219975.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:55.565Z,1513219975.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:55.740Z,1513219975.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:55.794Z,1513219975.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:56.137Z,1513219976.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:56.156Z,1513219976.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:56.361Z,1513219976.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:56.519Z,1513219976.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:56.553Z,1513219976.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:56.920Z,1513219976.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:56.946Z,1513219976.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:57.157Z,1513219977.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:57.320Z,1513219977.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:57.357Z,1513219977.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:57.561Z,1513219977.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:57.718Z,1513219977.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:57.744Z,1513219977.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:58.141Z,1513219978.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:58.156Z,1513219978.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:58.357Z,1513219978.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:58.545Z,1513219978.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:58.559Z,1513219978.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:58.945Z,1513219978.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:58.967Z,1513219978.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:59.153Z,1513219979.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:59.319Z,1513219979.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:59.350Z,1513219979.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:52:59.557Z,1513219979.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:59.718Z,1513219979.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:52:59.772Z,1513219979.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:00.135Z,1513219980.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:00.163Z,1513219980.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:00.354Z,1513219980.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:00.546Z,1513219980.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:00.564Z,1513219980.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:00.929Z,1513219980.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:00.967Z,1513219980.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:01.150Z,1513219981.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:01.331Z,1513219981.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:01.358Z,1513219981.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:01.553Z,1513219981.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:01.729Z,1513219981.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:01.760Z,1513219981.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:02.159Z,1513219982.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:02.210Z,1513219982.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:02.349Z,1513219982.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:02.551Z,1513219982.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:02.566Z,1513219982.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:03.146Z,1513219983.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:03.549Z,1513219983.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:04.346Z,1513219984.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:05.142Z,1513219985.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:05.546Z,1513219985.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:05.962Z,1513219985.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:05.977Z,1513219985.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:06.076Z,1513219986.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:06.114Z,1513219986.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:06.344Z,1513219986.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:06.461Z,1513219986.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:06.479Z,1513219986.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:06.865Z,1513219986.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:06.880Z,1513219986.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:07.139Z,1513219987.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:07.265Z,1513219987.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:07.284Z,1513219987.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:07.569Z,1513219987.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:07.659Z,1513219987.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:07.675Z,1513219987.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:08.056Z,1513219988.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:08.085Z,1513219988.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:08.365Z,1513219988.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:08.468Z,1513219988.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:08.487Z,1513219988.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:08.874Z,1513219988.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:08.889Z,1513219988.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:09.163Z,1513219989.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:09.276Z,1513219989.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:09.290Z,1513219989.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:09.569Z,1513219989.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:09.652Z,1513219989.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:09.687Z,1513219989.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:10.054Z,1513219990.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:10.087Z,1513219990.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:10.365Z,1513219990.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:10.451Z,1513219990.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:10.477Z,1513219990.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:10.873Z,1513219990.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:10.893Z,1513219990.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:11.161Z,1513219991.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:11.266Z,1513219991.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:11.295Z,1513219991.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:11.565Z,1513219991.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:11.715Z,1513219991.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:11.795Z,1513219991.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:12.063Z,1513219992.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:12.150Z,1513219992.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:12.361Z,1513219992.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:12.455Z,1513219992.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:12.491Z,1513219992.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:12.876Z,1513219992.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:12.935Z,1513219992.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:13.157Z,1513219993.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:13.259Z,1513219993.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:13.290Z,1513219993.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:13.561Z,1513219993.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:13.656Z,1513219993.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:13.707Z,1513219993.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:14.056Z,1513219994.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:14.094Z,1513219994.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:14.358Z,1513219994.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:14.467Z,1513219994.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:14.493Z,1513219994.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:14.880Z,1513219994.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:14.939Z,1513219994.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:15.156Z,1513219995.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:15.270Z,1513219995.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:15.319Z,1513219995.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:15.561Z,1513219995.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:15.664Z,1513219995.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:15.683Z,1513219995.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:16.067Z,1513219996.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:16.087Z,1513219996.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:16.357Z,1513219996.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:16.452Z,1513219996.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:16.487Z,1513219996.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:16.864Z,1513219996.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:16.894Z,1513219996.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:17.154Z,1513219997.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:17.269Z,1513219997.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:17.285Z,1513219997.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:17.557Z,1513219997.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:17.673Z,1513219997.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:17.688Z,1513219997.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:18.066Z,1513219998.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:18.128Z,1513219998.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:18.354Z,1513219998.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:18.452Z,1513219998.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:18.487Z,1513219998.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:18.930Z,1513219998.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:18.948Z,1513219998.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:19.149Z,1513219999.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:19.255Z,1513219999.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:19.299Z,1513219999.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:19.554Z,1513219999.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:19.651Z,1513219999.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:19.678Z,1513219999.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:20.050Z,1513220000.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:20.077Z,1513220000.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:20.349Z,1513220000.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:20.462Z,1513220000.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:20.488Z,1513220000.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:20.867Z,1513220000.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:20.894Z,1513220000.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:21.148Z,1513220001.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:21.319Z,1513220001.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:21.349Z,1513220001.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:21.557Z,1513220001.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:21.650Z,1513220001.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:21.678Z,1513220001.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:22.062Z,1513220002.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:22.115Z,1513220002.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:22.353Z,1513220002.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:22.459Z,1513220002.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:22.495Z,1513220002.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:22.854Z,1513220002.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:22.891Z,1513220002.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:23.151Z,1513220003.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:23.274Z,1513220003.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:23.307Z,1513220003.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:23.565Z,1513220003.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:23.674Z,1513220003.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:23.699Z,1513220003.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:24.070Z,1513220004.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:24.095Z,1513220004.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:24.362Z,1513220004.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:24.466Z,1513220004.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:24.521Z,1513220004.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:24.865Z,1513220004.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:24.919Z,1513220004.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:25.157Z,1513220005.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:25.265Z,1513220005.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:25.280Z,1513220005.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:25.562Z,1513220005.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:25.662Z,1513220005.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:25.677Z,1513220005.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:26.076Z,1513220006.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:26.114Z,1513220006.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:26.358Z,1513220006.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:26.473Z,1513220006.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:26.489Z,1513220006.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:26.871Z,1513220006.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:26.895Z,1513220006.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:27.153Z,1513220007.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:27.255Z,1513220007.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:27.289Z,1513220007.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:27.557Z,1513220007.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:27.679Z,1513220007.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:27.719Z,1513220007.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:28.051Z,1513220008.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:28.083Z,1513220008.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:28.353Z,1513220008.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:28.473Z,1513220008.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:28.488Z,1513220008.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:28.884Z,1513220008.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:28.904Z,1513220008.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:29.149Z,1513220009.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:29.282Z,1513220009.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:29.321Z,1513220009.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:29.553Z,1513220009.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:29.661Z,1513220009.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:29.676Z,1513220009.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:30.060Z,1513220010.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:30.076Z,1513220010.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:30.349Z,1513220010.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:30.459Z,1513220010.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:30.483Z,1513220010.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:30.887Z,1513220010.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:30.928Z,1513220010.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:31.146Z,1513220011.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:31.267Z,1513220011.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:31.286Z,1513220011.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:31.549Z,1513220011.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:31.675Z,1513220011.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:31.695Z,1513220011.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:32.075Z,1513220012.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:32.090Z,1513220012.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:32.346Z,1513220012.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:32.455Z,1513220012.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:32.482Z,1513220012.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:32.925Z,1513220012.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:32.954Z,1513220012.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:33.141Z,1513220013.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:33.255Z,1513220013.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:33.285Z,1513220013.285 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:53:33.285Z,1513220013.285 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:53:33.286Z,1513220013.286 [BPC1](ERROR): Data Fault
2017-12-14T02:53:33.299Z,1513220013.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:33.341Z,1513220013.341 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:53:33.546Z,1513220013.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:33.682Z,1513220013.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:33.758Z,1513220013.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:34.051Z,1513220014.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:34.130Z,1513220014.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:34.341Z,1513220014.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:34.464Z,1513220014.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:34.495Z,1513220014.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:34.511Z,1513220014.511 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:53:34.511Z,1513220014.511 [BPC1] No Fault, FailCount= 1
2017-12-14T02:53:34.863Z,1513220014.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:34.947Z,1513220014.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:35.139Z,1513220015.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:35.262Z,1513220015.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:35.289Z,1513220015.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:35.557Z,1513220015.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:35.651Z,1513220015.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:35.695Z,1513220015.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:36.048Z,1513220016.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:36.064Z,1513220016.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:36.353Z,1513220016.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:36.451Z,1513220016.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:36.470Z,1513220016.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:36.858Z,1513220016.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:36.873Z,1513220016.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:37.150Z,1513220017.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:37.312Z,1513220017.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:37.332Z,1513220017.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:37.566Z,1513220017.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:37.665Z,1513220017.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:37.718Z,1513220017.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:38.073Z,1513220018.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:38.111Z,1513220018.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:38.361Z,1513220018.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:38.458Z,1513220018.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:38.473Z,1513220018.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:38.869Z,1513220018.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:38.918Z,1513220018.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:39.157Z,1513220019.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:39.262Z,1513220019.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:39.277Z,1513220019.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:39.561Z,1513220019.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:39.659Z,1513220019.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:39.674Z,1513220019.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:40.063Z,1513220020.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:40.079Z,1513220020.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:40.357Z,1513220020.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:40.482Z,1513220020.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:40.524Z,1513220020.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:40.874Z,1513220020.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:40.914Z,1513220020.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:41.156Z,1513220021.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:41.258Z,1513220021.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:41.282Z,1513220021.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:41.561Z,1513220021.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:41.669Z,1513220021.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:41.683Z,1513220021.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:42.048Z,1513220022.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:42.076Z,1513220022.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:42.357Z,1513220022.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:42.475Z,1513220022.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:42.491Z,1513220022.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:42.491Z,1513220022.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2017-12-14T02:53:42.491Z,1513220022.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:53:42.495Z,1513220022.495 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:42.496Z,1513220022.496 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2017-12-14T02:53:42.496Z,1513220022.496 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:53:42.500Z,1513220022.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:42.500Z,1513220022.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2017-12-14T02:53:42.500Z,1513220022.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:53:42.577Z,1513220022.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:53:42.577Z,1513220022.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:53:42.577Z,1513220022.577 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:53:42.895Z,1513220022.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:42.920Z,1513220022.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:53:42.949Z,1513220022.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2017-12-14T02:53:42.949Z,1513220022.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:53:42.949Z,1513220022.949 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2017-12-14T02:53:42.950Z,1513220022.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:53:42.950Z,1513220022.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2017-12-14T02:53:43.153Z,1513220023.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:43.266Z,1513220023.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:43.323Z,1513220023.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:53:43.324Z,1513220023.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:53:43.324Z,1513220023.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:53:43.347Z,1513220023.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:53:43.347Z,1513220023.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:53:43.347Z,1513220023.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:53:43.348Z,1513220023.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:53:43.348Z,1513220023.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:53:43.349Z,1513220023.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:53:43.557Z,1513220023.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:43.672Z,1513220023.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:43.698Z,1513220023.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:44.060Z,1513220024.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:44.075Z,1513220024.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:44.354Z,1513220024.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:44.460Z,1513220024.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:44.475Z,1513220024.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:44.876Z,1513220024.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:44.907Z,1513220024.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:45.149Z,1513220025.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:45.266Z,1513220025.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:45.280Z,1513220025.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:45.553Z,1513220025.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:45.673Z,1513220025.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:45.688Z,1513220025.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:46.065Z,1513220026.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:46.087Z,1513220026.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:46.349Z,1513220026.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:46.460Z,1513220026.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:46.479Z,1513220026.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:46.928Z,1513220026.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:46.975Z,1513220026.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:47.146Z,1513220027.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:47.260Z,1513220027.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:47.304Z,1513220027.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:47.549Z,1513220027.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:47.658Z,1513220027.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:47.672Z,1513220027.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:48.054Z,1513220028.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:48.075Z,1513220028.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:48.346Z,1513220028.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:48.469Z,1513220028.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:48.484Z,1513220028.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:48.873Z,1513220028.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:48.888Z,1513220028.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:49.148Z,1513220029.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:49.263Z,1513220029.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:49.279Z,1513220029.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:49.561Z,1513220029.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:49.660Z,1513220029.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:49.678Z,1513220029.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:50.060Z,1513220030.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:50.079Z,1513220030.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:50.357Z,1513220030.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:50.470Z,1513220030.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:50.485Z,1513220030.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:50.862Z,1513220030.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:50.876Z,1513220030.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:51.155Z,1513220031.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:51.271Z,1513220031.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:51.287Z,1513220031.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:51.577Z,1513220031.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:51.673Z,1513220031.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:51.688Z,1513220031.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:52.069Z,1513220032.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:52.083Z,1513220032.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:52.373Z,1513220032.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:52.459Z,1513220032.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:52.474Z,1513220032.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:52.870Z,1513220032.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:52.897Z,1513220032.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:53.169Z,1513220033.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:53.293Z,1513220033.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:53.335Z,1513220033.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:53.573Z,1513220033.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:53.656Z,1513220033.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:53.703Z,1513220033.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:54.066Z,1513220034.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:54.097Z,1513220034.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:54.369Z,1513220034.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:54.473Z,1513220034.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:54.503Z,1513220034.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:54.876Z,1513220034.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:54.913Z,1513220034.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:55.165Z,1513220035.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:55.264Z,1513220035.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:55.322Z,1513220035.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:55.569Z,1513220035.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:55.657Z,1513220035.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:55.707Z,1513220035.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:56.070Z,1513220036.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:56.085Z,1513220036.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:56.365Z,1513220036.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:56.494Z,1513220036.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:56.531Z,1513220036.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:56.875Z,1513220036.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:56.939Z,1513220036.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:57.162Z,1513220037.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:57.261Z,1513220037.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:57.295Z,1513220037.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:57.565Z,1513220037.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:57.665Z,1513220037.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:57.724Z,1513220037.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:58.060Z,1513220038.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:58.074Z,1513220038.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:58.361Z,1513220038.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:58.470Z,1513220038.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:58.496Z,1513220038.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:58.890Z,1513220038.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:58.921Z,1513220038.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:59.157Z,1513220039.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:59.266Z,1513220039.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:59.288Z,1513220039.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:53:59.561Z,1513220039.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:59.651Z,1513220039.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:53:59.728Z,1513220039.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:00.051Z,1513220040.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:00.078Z,1513220040.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:00.360Z,1513220040.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:00.452Z,1513220040.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:00.478Z,1513220040.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:00.900Z,1513220040.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:00.957Z,1513220040.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:00.965Z,1513220040.965 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:49:00.6Z
2017-12-14T02:54:00.965Z,1513220040.965 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T02:54:00.965Z,1513220040.965 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T02:54:01.157Z,1513220041.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:01.269Z,1513220041.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:01.314Z,1513220041.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:01.561Z,1513220041.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:02.046Z,1513220042.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:02.060Z,1513220042.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:02.188Z,1513220042.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:02.207Z,1513220042.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:02.357Z,1513220042.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:03.154Z,1513220043.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:03.574Z,1513220043.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:04.369Z,1513220044.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:05.167Z,1513220045.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:05.577Z,1513220045.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:05.672Z,1513220045.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:05.702Z,1513220045.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:05.796Z,1513220045.796 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0056.lzma
2017-12-14T02:54:05.828Z,1513220045.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:05.879Z,1513220045.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:06.182Z,1513220046.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:06.215Z,1513220046.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:06.373Z,1513220046.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:06.899Z,1513220046.899 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0056.lzma.bak
2017-12-14T02:54:06.900Z,1513220046.900 [DataOverHttps](INFO): SBD MOMSN=5437442
2017-12-14T02:54:06.969Z,1513220046.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:07.001Z,1513220047.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:07.169Z,1513220047.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:07.573Z,1513220047.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:07.859Z,1513220047.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:07.879Z,1513220047.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:07.983Z,1513220047.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:08.030Z,1513220048.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:08.369Z,1513220048.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:09.165Z,1513220049.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:09.569Z,1513220049.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:10.365Z,1513220050.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:11.161Z,1513220051.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:11.568Z,1513220051.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:11.580Z,1513220051.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:11.611Z,1513220051.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:11.707Z,1513220051.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:11.750Z,1513220051.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:12.082Z,1513220052.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:12.106Z,1513220052.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:12.361Z,1513220052.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:12.481Z,1513220052.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:12.516Z,1513220052.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:12.876Z,1513220052.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:12.914Z,1513220052.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:13.158Z,1513220053.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:13.284Z,1513220053.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:13.334Z,1513220053.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:13.561Z,1513220053.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:14.357Z,1513220054.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:15.154Z,1513220055.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:15.557Z,1513220055.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:16.353Z,1513220056.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:16.718Z,1513220056.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:16.733Z,1513220056.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:16.822Z,1513220056.822 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0057.lzma
2017-12-14T02:54:16.865Z,1513220056.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:16.916Z,1513220056.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:17.159Z,1513220057.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:17.215Z,1513220057.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:17.251Z,1513220057.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:17.579Z,1513220057.579 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0057.lzma.bak
2017-12-14T02:54:17.579Z,1513220057.579 [DataOverHttps](INFO): SBD MOMSN=5437446
2017-12-14T02:54:17.585Z,1513220057.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:17.624Z,1513220057.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:17.652Z,1513220057.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:18.381Z,1513220058.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:18.725Z,1513220058.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:18.799Z,1513220058.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:18.806Z,1513220058.806 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T02:54:18.807Z,1513220058.807 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T02:54:18.807Z,1513220058.807 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T02:54:18.915Z,1513220058.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:18.942Z,1513220058.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:19.179Z,1513220059.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:19.609Z,1513220059.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:20.405Z,1513220060.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:21.201Z,1513220061.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:21.605Z,1513220061.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:22.401Z,1513220062.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:22.414Z,1513220062.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:22.471Z,1513220062.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:22.583Z,1513220062.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:22.598Z,1513220062.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:22.969Z,1513220062.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:23.041Z,1513220063.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:23.197Z,1513220063.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:23.359Z,1513220063.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:23.400Z,1513220063.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:23.601Z,1513220063.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:23.748Z,1513220063.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:23.763Z,1513220063.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:24.148Z,1513220064.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:24.168Z,1513220064.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:24.397Z,1513220064.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:24.557Z,1513220064.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:24.572Z,1513220064.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:24.956Z,1513220064.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:24.970Z,1513220064.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:25.193Z,1513220065.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:25.362Z,1513220065.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:25.376Z,1513220065.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:25.597Z,1513220065.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:25.756Z,1513220065.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:25.771Z,1513220065.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:26.158Z,1513220066.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:26.172Z,1513220066.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:26.394Z,1513220066.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:26.557Z,1513220066.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:26.571Z,1513220066.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:26.952Z,1513220066.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:26.967Z,1513220066.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:27.189Z,1513220067.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:27.348Z,1513220067.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:27.375Z,1513220067.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:27.593Z,1513220067.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:27.755Z,1513220067.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:27.770Z,1513220067.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:28.157Z,1513220068.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:28.173Z,1513220068.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:28.389Z,1513220068.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:28.561Z,1513220068.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:28.576Z,1513220068.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:28.957Z,1513220068.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:28.979Z,1513220068.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:29.187Z,1513220069.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:29.360Z,1513220069.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:29.375Z,1513220069.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:29.593Z,1513220069.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:29.751Z,1513220069.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:29.770Z,1513220069.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:30.147Z,1513220070.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:30.171Z,1513220070.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:30.389Z,1513220070.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:30.551Z,1513220070.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:30.567Z,1513220070.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:30.955Z,1513220070.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:30.970Z,1513220070.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:31.187Z,1513220071.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:31.366Z,1513220071.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:31.419Z,1513220071.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:31.589Z,1513220071.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:31.765Z,1513220071.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:31.780Z,1513220071.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:32.165Z,1513220072.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:32.180Z,1513220072.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:32.385Z,1513220072.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:32.564Z,1513220072.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:32.579Z,1513220072.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:32.959Z,1513220072.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:32.974Z,1513220072.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:33.182Z,1513220073.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:33.343Z,1513220073.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:33.368Z,1513220073.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:33.585Z,1513220073.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:33.743Z,1513220073.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:33.775Z,1513220073.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:34.170Z,1513220074.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:34.185Z,1513220074.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:34.381Z,1513220074.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:34.562Z,1513220074.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:34.577Z,1513220074.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:34.962Z,1513220074.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:34.983Z,1513220074.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:35.178Z,1513220075.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:35.370Z,1513220075.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:35.415Z,1513220075.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:35.581Z,1513220075.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:35.746Z,1513220075.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:35.772Z,1513220075.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:36.158Z,1513220076.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:36.172Z,1513220076.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:36.377Z,1513220076.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:36.543Z,1513220076.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:36.576Z,1513220076.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:36.943Z,1513220076.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:36.979Z,1513220076.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:37.209Z,1513220077.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:37.362Z,1513220077.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:37.384Z,1513220077.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:37.613Z,1513220077.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:37.772Z,1513220077.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:37.791Z,1513220077.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:38.154Z,1513220078.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:38.187Z,1513220078.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:38.413Z,1513220078.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:38.584Z,1513220078.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:38.608Z,1513220078.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:38.953Z,1513220078.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:38.968Z,1513220078.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:39.210Z,1513220079.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:39.356Z,1513220079.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:39.371Z,1513220079.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:39.613Z,1513220079.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:39.748Z,1513220079.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:39.779Z,1513220079.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:40.158Z,1513220080.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:40.179Z,1513220080.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:40.409Z,1513220080.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:40.558Z,1513220080.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:40.574Z,1513220080.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:40.974Z,1513220080.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:40.995Z,1513220080.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:41.205Z,1513220081.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:41.343Z,1513220081.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:41.383Z,1513220081.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:41.653Z,1513220081.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:41.790Z,1513220081.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:41.835Z,1513220081.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:42.153Z,1513220082.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:42.184Z,1513220082.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:42.450Z,1513220082.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:42.549Z,1513220082.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:42.564Z,1513220082.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:42.943Z,1513220082.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:42.959Z,1513220082.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:43.245Z,1513220083.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:43.362Z,1513220083.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:43.458Z,1513220083.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:43.649Z,1513220083.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:43.769Z,1513220083.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:43.791Z,1513220083.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:44.185Z,1513220084.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:44.242Z,1513220084.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:44.445Z,1513220084.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:44.556Z,1513220084.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:44.571Z,1513220084.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:44.996Z,1513220084.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:45.044Z,1513220085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:45.241Z,1513220085.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:45.352Z,1513220085.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:45.367Z,1513220085.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:45.645Z,1513220085.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:45.753Z,1513220085.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:45.768Z,1513220085.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:46.161Z,1513220086.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:46.176Z,1513220086.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:46.441Z,1513220086.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:46.550Z,1513220086.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:46.565Z,1513220086.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:46.966Z,1513220086.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:46.997Z,1513220086.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:47.237Z,1513220087.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:47.360Z,1513220087.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:47.399Z,1513220087.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:47.641Z,1513220087.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:47.751Z,1513220087.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:47.767Z,1513220087.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:48.152Z,1513220088.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:48.167Z,1513220088.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:48.437Z,1513220088.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:48.596Z,1513220088.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:48.612Z,1513220088.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:48.954Z,1513220088.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:48.972Z,1513220088.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:49.217Z,1513220089.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:49.357Z,1513220089.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:49.379Z,1513220089.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:49.758Z,1513220089.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:49.772Z,1513220089.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:50.013Z,1513220090.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:50.158Z,1513220090.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:50.180Z,1513220090.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:50.557Z,1513220090.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:50.572Z,1513220090.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:50.811Z,1513220090.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:50.958Z,1513220090.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:50.973Z,1513220090.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:51.221Z,1513220091.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:51.399Z,1513220091.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:51.423Z,1513220091.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:51.756Z,1513220091.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:51.772Z,1513220091.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:52.017Z,1513220092.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:52.187Z,1513220092.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:52.212Z,1513220092.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:52.563Z,1513220092.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:52.583Z,1513220092.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:52.815Z,1513220092.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:52.962Z,1513220092.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:52.978Z,1513220092.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:53.225Z,1513220093.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:53.359Z,1513220093.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:53.408Z,1513220093.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:53.759Z,1513220093.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:53.775Z,1513220093.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:54.021Z,1513220094.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:54.145Z,1513220094.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:54.173Z,1513220094.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:54.584Z,1513220094.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:54.624Z,1513220094.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:54.819Z,1513220094.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:54.946Z,1513220094.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:54.981Z,1513220094.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:55.245Z,1513220095.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:55.368Z,1513220095.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:55.383Z,1513220095.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:55.756Z,1513220095.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:55.783Z,1513220095.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:56.041Z,1513220096.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:56.155Z,1513220096.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:56.183Z,1513220096.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:56.545Z,1513220096.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:56.560Z,1513220096.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:56.839Z,1513220096.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:56.956Z,1513220096.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:56.979Z,1513220096.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:57.277Z,1513220097.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:57.343Z,1513220097.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:57.370Z,1513220097.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:57.800Z,1513220097.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:57.824Z,1513220097.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:58.073Z,1513220098.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:58.167Z,1513220098.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:58.187Z,1513220098.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:58.567Z,1513220098.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:58.583Z,1513220098.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:58.869Z,1513220098.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:58.958Z,1513220098.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:58.991Z,1513220098.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:59.339Z,1513220099.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:59.370Z,1513220099.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:54:59.553Z,1513220099.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:59.745Z,1513220099.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:54:59.770Z,1513220099.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:00.159Z,1513220100.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:00.179Z,1513220100.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:00.353Z,1513220100.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:00.548Z,1513220100.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:00.575Z,1513220100.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:00.989Z,1513220100.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:01.030Z,1513220101.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:01.151Z,1513220101.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:01.369Z,1513220101.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:01.399Z,1513220101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:01.581Z,1513220101.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:01.770Z,1513220101.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:01.784Z,1513220101.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:02.154Z,1513220102.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:02.180Z,1513220102.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:02.377Z,1513220102.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:02.545Z,1513220102.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:02.559Z,1513220102.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:02.957Z,1513220102.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:02.987Z,1513220102.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:03.173Z,1513220103.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:03.356Z,1513220103.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:03.387Z,1513220103.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:03.577Z,1513220103.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:03.751Z,1513220103.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:03.787Z,1513220103.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:04.157Z,1513220104.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:04.166Z,1513220104.166 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:55:04.166Z,1513220104.166 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:55:04.166Z,1513220104.166 [BPC1](ERROR): Data Fault
2017-12-14T02:55:04.196Z,1513220104.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:04.221Z,1513220104.221 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:55:04.373Z,1513220104.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:04.558Z,1513220104.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:04.579Z,1513220104.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:04.957Z,1513220104.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:04.975Z,1513220104.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:05.169Z,1513220105.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:05.345Z,1513220105.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:05.378Z,1513220105.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:05.404Z,1513220105.404 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:55:05.404Z,1513220105.404 [BPC1] No Fault, FailCount= 1
2017-12-14T02:55:05.573Z,1513220105.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:05.750Z,1513220105.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:05.816Z,1513220105.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:06.152Z,1513220106.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:06.166Z,1513220106.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:06.369Z,1513220106.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:06.555Z,1513220106.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:06.569Z,1513220106.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:06.960Z,1513220106.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:06.983Z,1513220106.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:07.165Z,1513220107.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:07.372Z,1513220107.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:07.403Z,1513220107.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:07.569Z,1513220107.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:07.767Z,1513220107.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:07.781Z,1513220107.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:08.161Z,1513220108.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:08.176Z,1513220108.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:08.366Z,1513220108.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:08.572Z,1513220108.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:08.586Z,1513220108.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:08.942Z,1513220108.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:08.979Z,1513220108.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:09.161Z,1513220109.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:09.364Z,1513220109.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:09.379Z,1513220109.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:09.566Z,1513220109.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:09.751Z,1513220109.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:09.783Z,1513220109.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:10.168Z,1513220110.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:10.182Z,1513220110.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:10.361Z,1513220110.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:10.571Z,1513220110.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:10.595Z,1513220110.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:10.964Z,1513220110.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:10.987Z,1513220110.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:11.157Z,1513220111.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:11.367Z,1513220111.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:11.387Z,1513220111.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:11.561Z,1513220111.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:11.748Z,1513220111.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:11.774Z,1513220111.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:12.143Z,1513220112.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:12.280Z,1513220112.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:12.357Z,1513220112.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:12.548Z,1513220112.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:12.574Z,1513220112.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:12.948Z,1513220112.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:12.974Z,1513220112.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:13.155Z,1513220113.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:13.361Z,1513220113.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:13.383Z,1513220113.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:13.569Z,1513220113.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:13.773Z,1513220113.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:13.803Z,1513220113.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:14.158Z,1513220114.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:14.227Z,1513220114.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:14.369Z,1513220114.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:14.546Z,1513220114.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:14.589Z,1513220114.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:14.947Z,1513220114.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:14.991Z,1513220114.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:15.175Z,1513220115.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:15.343Z,1513220115.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:15.363Z,1513220115.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:15.581Z,1513220115.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:15.751Z,1513220115.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:15.784Z,1513220115.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:16.166Z,1513220116.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:16.201Z,1513220116.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:16.377Z,1513220116.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:16.567Z,1513220116.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:16.599Z,1513220116.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:16.967Z,1513220116.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:17.011Z,1513220117.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:17.173Z,1513220117.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:17.354Z,1513220117.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:17.368Z,1513220117.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:17.577Z,1513220117.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:17.756Z,1513220117.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:17.771Z,1513220117.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:18.151Z,1513220118.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:18.165Z,1513220118.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:18.553Z,1513220118.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:18.568Z,1513220118.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:18.956Z,1513220118.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:18.972Z,1513220118.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:19.370Z,1513220119.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:19.401Z,1513220119.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:22.754Z,1513220122.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:22.769Z,1513220122.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:22.926Z,1513220122.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:22.953Z,1513220122.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:23.362Z,1513220123.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:23.390Z,1513220123.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:23.703Z,1513220123.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:23.739Z,1513220123.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:24.130Z,1513220124.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:24.145Z,1513220124.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:24.362Z,1513220124.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:24.533Z,1513220124.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:24.548Z,1513220124.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:24.933Z,1513220124.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:24.979Z,1513220124.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:25.157Z,1513220125.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:25.301Z,1513220125.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:25.351Z,1513220125.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:25.561Z,1513220125.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:25.703Z,1513220125.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:25.730Z,1513220125.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x60681 got:0x7490
2017-12-14T02:55:25.769Z,1513220125.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:26.128Z,1513220126.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:26.192Z,1513220126.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:26.358Z,1513220126.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:26.533Z,1513220126.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:26.595Z,1513220126.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:26.937Z,1513220126.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:26.952Z,1513220126.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:27.155Z,1513220127.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:27.300Z,1513220127.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:27.363Z,1513220127.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:27.573Z,1513220127.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:27.708Z,1513220127.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:27.741Z,1513220127.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:28.112Z,1513220128.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:28.175Z,1513220128.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:28.369Z,1513220128.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:28.514Z,1513220128.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:28.548Z,1513220128.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:28.915Z,1513220128.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:28.948Z,1513220128.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:29.168Z,1513220129.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:29.313Z,1513220129.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:29.337Z,1513220129.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:29.590Z,1513220129.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:29.709Z,1513220129.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:29.768Z,1513220129.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:30.111Z,1513220130.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:30.151Z,1513220130.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:30.387Z,1513220130.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:30.519Z,1513220130.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:30.534Z,1513220130.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:30.923Z,1513220130.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:30.969Z,1513220130.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:31.181Z,1513220131.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:31.321Z,1513220131.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:31.336Z,1513220131.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:31.585Z,1513220131.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:31.711Z,1513220131.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:31.743Z,1513220131.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:32.122Z,1513220132.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:32.137Z,1513220132.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:32.523Z,1513220132.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:32.538Z,1513220132.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:32.934Z,1513220132.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:32.988Z,1513220132.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:33.323Z,1513220133.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:33.342Z,1513220133.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:33.700Z,1513220133.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:33.734Z,1513220133.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:34.129Z,1513220134.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:34.143Z,1513220134.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:34.525Z,1513220134.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:34.539Z,1513220134.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:34.919Z,1513220134.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:34.942Z,1513220134.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:35.299Z,1513220135.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:35.332Z,1513220135.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:35.717Z,1513220135.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:35.731Z,1513220135.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:36.137Z,1513220136.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:36.196Z,1513220136.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:36.527Z,1513220136.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:36.547Z,1513220136.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:36.924Z,1513220136.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:36.939Z,1513220136.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:37.318Z,1513220137.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:37.337Z,1513220137.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:37.706Z,1513220137.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:37.739Z,1513220137.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:38.126Z,1513220138.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:38.147Z,1513220138.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:38.522Z,1513220138.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:38.541Z,1513220138.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:38.941Z,1513220138.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:38.965Z,1513220138.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:39.342Z,1513220139.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:39.365Z,1513220139.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:39.702Z,1513220139.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:39.743Z,1513220139.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:40.104Z,1513220140.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:40.137Z,1513220140.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:40.511Z,1513220140.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:40.540Z,1513220140.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:40.899Z,1513220140.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:40.927Z,1513220140.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:41.325Z,1513220141.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:41.357Z,1513220141.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:41.717Z,1513220141.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:41.732Z,1513220141.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:42.112Z,1513220142.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:42.126Z,1513220142.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:42.366Z,1513220142.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:42.536Z,1513220142.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:42.600Z,1513220142.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:42.908Z,1513220142.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:42.934Z,1513220142.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:43.163Z,1513220143.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:43.306Z,1513220143.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:43.329Z,1513220143.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:43.569Z,1513220143.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:43.710Z,1513220143.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:43.726Z,1513220143.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:44.129Z,1513220144.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:44.163Z,1513220144.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:44.365Z,1513220144.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:44.526Z,1513220144.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:44.554Z,1513220144.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:44.930Z,1513220144.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:44.959Z,1513220144.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:45.161Z,1513220145.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:45.310Z,1513220145.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:45.329Z,1513220145.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:45.565Z,1513220145.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:45.729Z,1513220145.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:45.765Z,1513220145.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:46.115Z,1513220146.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:46.137Z,1513220146.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:46.523Z,1513220146.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:46.559Z,1513220146.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:46.924Z,1513220146.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:46.939Z,1513220146.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:47.306Z,1513220147.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:47.342Z,1513220147.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:47.729Z,1513220147.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:47.744Z,1513220147.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:48.123Z,1513220148.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:48.186Z,1513220148.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:48.524Z,1513220148.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:48.575Z,1513220148.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:48.926Z,1513220148.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:48.955Z,1513220148.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:49.387Z,1513220149.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:49.403Z,1513220149.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:49.699Z,1513220149.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:49.742Z,1513220149.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:50.127Z,1513220150.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:50.179Z,1513220150.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:50.526Z,1513220150.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:50.541Z,1513220150.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:50.909Z,1513220150.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:50.979Z,1513220150.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:51.300Z,1513220151.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:51.342Z,1513220151.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:51.703Z,1513220151.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:51.736Z,1513220151.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:52.164Z,1513220152.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:52.202Z,1513220152.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:52.353Z,1513220152.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:52.514Z,1513220152.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:52.558Z,1513220152.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:52.953Z,1513220152.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:52.959Z,1513220152.959 [PNI_TCM](ERROR): CRC does not match. Expected:0x9544 got:0x36066
2017-12-14T02:55:52.987Z,1513220152.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:53.149Z,1513220153.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:53.306Z,1513220153.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:53.340Z,1513220153.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:53.553Z,1513220153.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:53.726Z,1513220153.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:53.782Z,1513220153.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:54.092Z,1513220154.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:54.135Z,1513220154.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:54.508Z,1513220154.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:54.529Z,1513220154.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:54.918Z,1513220154.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:54.947Z,1513220154.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:55.358Z,1513220155.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:55.381Z,1513220155.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:55.725Z,1513220155.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:55.742Z,1513220155.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:56.125Z,1513220156.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:56.140Z,1513220156.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:56.361Z,1513220156.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:56.503Z,1513220156.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:56.531Z,1513220156.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:56.915Z,1513220156.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:56.929Z,1513220156.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:57.159Z,1513220157.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:57.323Z,1513220157.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:57.342Z,1513220157.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:57.565Z,1513220157.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:57.716Z,1513220157.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:57.733Z,1513220157.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:58.123Z,1513220158.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:58.139Z,1513220158.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:58.361Z,1513220158.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:58.539Z,1513220158.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:58.575Z,1513220158.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:58.921Z,1513220158.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:58.941Z,1513220158.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:59.157Z,1513220159.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:59.299Z,1513220159.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:59.360Z,1513220159.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:55:59.561Z,1513220159.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:59.710Z,1513220159.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:55:59.742Z,1513220159.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:00.121Z,1513220160.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:00.136Z,1513220160.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:00.529Z,1513220160.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:00.551Z,1513220160.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:00.926Z,1513220160.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:00.940Z,1513220160.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:01.319Z,1513220161.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:01.338Z,1513220161.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:01.715Z,1513220161.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:01.747Z,1513220161.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:02.130Z,1513220162.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:02.148Z,1513220162.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:02.532Z,1513220162.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:02.554Z,1513220162.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:02.934Z,1513220162.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:02.948Z,1513220162.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:03.313Z,1513220163.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:03.336Z,1513220163.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:03.709Z,1513220163.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:03.754Z,1513220163.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:04.137Z,1513220164.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:04.151Z,1513220164.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:04.535Z,1513220164.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:04.549Z,1513220164.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:04.961Z,1513220164.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:05.007Z,1513220165.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:05.309Z,1513220165.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:05.354Z,1513220165.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:05.707Z,1513220165.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:05.739Z,1513220165.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:06.110Z,1513220166.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:06.128Z,1513220166.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:06.516Z,1513220166.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:06.554Z,1513220166.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:06.911Z,1513220166.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:06.959Z,1513220166.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:07.316Z,1513220167.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:07.346Z,1513220167.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:07.723Z,1513220167.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:07.757Z,1513220167.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:08.115Z,1513220168.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:08.135Z,1513220168.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:08.512Z,1513220168.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:08.543Z,1513220168.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:08.927Z,1513220168.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:08.933Z,1513220168.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T02:56:08.978Z,1513220168.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:09.307Z,1513220169.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:09.339Z,1513220169.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:09.716Z,1513220169.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:09.731Z,1513220169.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:10.121Z,1513220170.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:10.142Z,1513220170.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:10.523Z,1513220170.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:10.543Z,1513220170.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:10.929Z,1513220170.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:10.944Z,1513220170.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:11.303Z,1513220171.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:11.334Z,1513220171.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:11.703Z,1513220171.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:11.803Z,1513220171.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:12.140Z,1513220172.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:12.164Z,1513220172.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:12.518Z,1513220172.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:12.571Z,1513220172.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:12.914Z,1513220172.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:12.946Z,1513220172.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:13.304Z,1513220173.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:13.359Z,1513220173.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:13.706Z,1513220173.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:13.746Z,1513220173.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:14.115Z,1513220174.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:14.146Z,1513220174.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:14.519Z,1513220174.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:14.543Z,1513220174.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:14.913Z,1513220174.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:14.951Z,1513220174.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:15.343Z,1513220175.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:15.359Z,1513220175.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x45461 got:0x16700
2017-12-14T02:56:15.401Z,1513220175.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:15.700Z,1513220175.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:15.732Z,1513220175.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:16.123Z,1513220176.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:16.138Z,1513220176.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:16.531Z,1513220176.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:16.546Z,1513220176.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:16.927Z,1513220176.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:16.942Z,1513220176.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:17.325Z,1513220177.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:17.340Z,1513220177.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:17.703Z,1513220177.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:17.729Z,1513220177.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:18.124Z,1513220178.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:18.142Z,1513220178.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:18.529Z,1513220178.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:18.598Z,1513220178.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:18.980Z,1513220178.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:19.043Z,1513220179.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:19.306Z,1513220179.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:19.340Z,1513220179.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:19.717Z,1513220179.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:19.757Z,1513220179.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:26.988Z,1513220186.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:27.036Z,1513220187.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:27.156Z,1513220187.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:27.199Z,1513220187.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:27.515Z,1513220187.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:27.532Z,1513220187.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:27.931Z,1513220187.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:27.949Z,1513220187.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:28.301Z,1513220188.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:28.349Z,1513220188.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:28.708Z,1513220188.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:28.760Z,1513220188.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:29.112Z,1513220189.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:29.127Z,1513220189.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:29.483Z,1513220189.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:29.535Z,1513220189.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:29.886Z,1513220189.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:29.912Z,1513220189.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:30.304Z,1513220190.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:30.318Z,1513220190.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:30.726Z,1513220190.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:30.841Z,1513220190.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:31.132Z,1513220191.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:31.170Z,1513220191.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:31.503Z,1513220191.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:31.535Z,1513220191.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:31.885Z,1513220191.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:31.920Z,1513220191.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:32.286Z,1513220192.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:32.353Z,1513220192.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:32.374Z,1513220192.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:32.684Z,1513220192.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:32.724Z,1513220192.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:33.102Z,1513220193.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:33.141Z,1513220193.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:33.169Z,1513220193.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:33.519Z,1513220193.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:33.570Z,1513220193.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:33.574Z,1513220193.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:33.905Z,1513220193.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:33.966Z,1513220193.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:34.314Z,1513220194.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:34.370Z,1513220194.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:34.374Z,1513220194.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:34.723Z,1513220194.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:34.776Z,1513220194.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:35.096Z,1513220195.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:35.135Z,1513220195.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:35.166Z,1513220195.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:35.504Z,1513220195.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:35.543Z,1513220195.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:35.569Z,1513220195.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:35.938Z,1513220195.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:35.994Z,1513220195.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:36.308Z,1513220196.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:36.348Z,1513220196.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:36.365Z,1513220196.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:36.711Z,1513220196.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:36.779Z,1513220196.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:37.137Z,1513220197.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:37.163Z,1513220197.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:37.247Z,1513220197.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:37.509Z,1513220197.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:37.558Z,1513220197.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:37.621Z,1513220197.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:37.904Z,1513220197.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:37.912Z,1513220197.912 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T02:56:37.912Z,1513220197.912 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:56:37.912Z,1513220197.912 [BPC1](ERROR): Data Fault
2017-12-14T02:56:37.961Z,1513220197.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:37.999Z,1513220197.999 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:56:38.298Z,1513220198.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:38.337Z,1513220198.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:38.714Z,1513220198.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:38.752Z,1513220198.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:39.096Z,1513220199.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:39.191Z,1513220199.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:39.236Z,1513220199.236 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:56:39.236Z,1513220199.236 [BPC1] No Fault, FailCount= 1
2017-12-14T02:56:39.500Z,1513220199.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:39.615Z,1513220199.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:39.895Z,1513220199.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:39.947Z,1513220199.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:40.285Z,1513220200.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:40.320Z,1513220200.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:40.690Z,1513220200.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:40.711Z,1513220200.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:41.097Z,1513220201.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:41.119Z,1513220201.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:41.498Z,1513220201.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:41.512Z,1513220201.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:41.897Z,1513220201.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:41.997Z,1513220201.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:42.295Z,1513220202.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:42.310Z,1513220202.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:42.694Z,1513220202.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:42.709Z,1513220202.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:43.101Z,1513220203.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:43.115Z,1513220203.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:43.506Z,1513220203.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:43.527Z,1513220203.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:43.527Z,1513220203.527 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2017-12-14T02:56:43.527Z,1513220203.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:56:43.528Z,1513220203.528 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:43.529Z,1513220203.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2017-12-14T02:56:43.529Z,1513220203.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:56:43.531Z,1513220203.531 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:43.531Z,1513220203.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2017-12-14T02:56:43.531Z,1513220203.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:56:43.591Z,1513220203.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:56:43.591Z,1513220203.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:56:43.591Z,1513220203.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:56:43.903Z,1513220203.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:43.933Z,1513220203.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:56:43.933Z,1513220203.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2017-12-14T02:56:43.934Z,1513220203.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:56:43.934Z,1513220203.934 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2017-12-14T02:56:43.934Z,1513220203.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:56:43.934Z,1513220203.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2017-12-14T02:56:44.284Z,1513220204.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:44.313Z,1513220204.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:56:44.314Z,1513220204.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:56:44.314Z,1513220204.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:56:44.315Z,1513220204.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:56:44.315Z,1513220204.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:56:44.315Z,1513220204.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:56:44.316Z,1513220204.316 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:56:44.316Z,1513220204.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:56:44.316Z,1513220204.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:56:44.683Z,1513220204.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:44.720Z,1513220204.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:45.132Z,1513220205.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:45.159Z,1513220205.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:45.497Z,1513220205.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:45.536Z,1513220205.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:45.905Z,1513220205.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:45.934Z,1513220205.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:46.290Z,1513220206.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:46.305Z,1513220206.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:46.692Z,1513220206.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:46.706Z,1513220206.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:47.109Z,1513220207.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:47.136Z,1513220207.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:47.498Z,1513220207.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:47.513Z,1513220207.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:47.905Z,1513220207.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:47.951Z,1513220207.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:48.311Z,1513220208.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:48.359Z,1513220208.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:48.697Z,1513220208.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:48.712Z,1513220208.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:49.113Z,1513220209.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:49.144Z,1513220209.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:49.502Z,1513220209.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:49.523Z,1513220209.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:49.898Z,1513220209.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:49.913Z,1513220209.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:50.058Z,1513220210.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:50.295Z,1513220210.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:50.310Z,1513220210.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:50.694Z,1513220210.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:50.709Z,1513220210.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:50.853Z,1513220210.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:51.098Z,1513220211.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:51.185Z,1513220211.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:51.531Z,1513220211.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:51.550Z,1513220211.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:51.903Z,1513220211.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:51.923Z,1513220211.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:52.294Z,1513220212.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:52.313Z,1513220212.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:52.683Z,1513220212.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:52.715Z,1513220212.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:53.125Z,1513220213.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:53.208Z,1513220213.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:53.507Z,1513220213.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:53.522Z,1513220213.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:53.904Z,1513220213.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:53.922Z,1513220213.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:54.287Z,1513220214.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:54.317Z,1513220214.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:54.721Z,1513220214.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:54.836Z,1513220214.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:55.101Z,1513220215.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:55.116Z,1513220215.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:55.506Z,1513220215.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:55.522Z,1513220215.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:55.904Z,1513220215.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:55.919Z,1513220215.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:56.296Z,1513220216.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:56.310Z,1513220216.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:56.696Z,1513220216.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:56.712Z,1513220216.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:57.102Z,1513220217.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:57.117Z,1513220217.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:57.506Z,1513220217.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:57.527Z,1513220217.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:57.902Z,1513220217.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:57.923Z,1513220217.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:58.288Z,1513220218.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:58.322Z,1513220218.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:58.691Z,1513220218.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:58.726Z,1513220218.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:59.103Z,1513220219.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:59.127Z,1513220219.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:59.510Z,1513220219.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:59.525Z,1513220219.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:56:59.897Z,1513220219.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:56:59.947Z,1513220219.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:00.293Z,1513220220.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:00.332Z,1513220220.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:00.692Z,1513220220.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:00.707Z,1513220220.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:01.107Z,1513220221.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:01.155Z,1513220221.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:01.510Z,1513220221.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:01.558Z,1513220221.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:01.899Z,1513220221.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:01.928Z,1513220221.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:02.287Z,1513220222.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:02.339Z,1513220222.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:02.683Z,1513220222.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:02.712Z,1513220222.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:03.104Z,1513220223.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:03.120Z,1513220223.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:03.505Z,1513220223.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:03.526Z,1513220223.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:03.896Z,1513220223.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:03.924Z,1513220223.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:04.283Z,1513220224.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:04.336Z,1513220224.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:04.688Z,1513220224.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:04.727Z,1513220224.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:05.089Z,1513220225.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:05.160Z,1513220225.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:05.498Z,1513220225.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:05.519Z,1513220225.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:05.900Z,1513220225.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:05.915Z,1513220225.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:06.292Z,1513220226.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:06.306Z,1513220226.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:06.696Z,1513220226.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:06.710Z,1513220226.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:07.101Z,1513220227.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:07.249Z,1513220227.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:07.550Z,1513220227.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:07.570Z,1513220227.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:07.893Z,1513220227.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:07.928Z,1513220227.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:08.283Z,1513220228.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:08.319Z,1513220228.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:08.686Z,1513220228.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:08.719Z,1513220228.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:09.094Z,1513220229.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:09.115Z,1513220229.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:09.511Z,1513220229.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:09.525Z,1513220229.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:09.916Z,1513220229.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:09.931Z,1513220229.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:10.288Z,1513220230.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:10.315Z,1513220230.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:10.715Z,1513220230.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:10.849Z,1513220230.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:11.101Z,1513220231.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:11.123Z,1513220231.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:11.497Z,1513220231.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:11.525Z,1513220231.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:11.915Z,1513220231.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:11.929Z,1513220231.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:12.287Z,1513220232.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:12.303Z,1513220232.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:12.687Z,1513220232.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:12.708Z,1513220232.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:13.095Z,1513220233.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:13.115Z,1513220233.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:13.498Z,1513220233.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:13.513Z,1513220233.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:13.898Z,1513220233.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:13.912Z,1513220233.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:14.291Z,1513220234.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:14.362Z,1513220234.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:14.688Z,1513220234.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:14.704Z,1513220234.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:15.095Z,1513220235.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:15.116Z,1513220235.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:15.509Z,1513220235.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:15.524Z,1513220235.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:15.906Z,1513220235.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:15.921Z,1513220235.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:16.296Z,1513220236.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:16.311Z,1513220236.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:16.683Z,1513220236.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:16.709Z,1513220236.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:17.121Z,1513220237.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:17.156Z,1513220237.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:17.505Z,1513220237.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:17.521Z,1513220237.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:17.931Z,1513220237.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:17.962Z,1513220237.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:18.287Z,1513220238.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:18.314Z,1513220238.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:18.683Z,1513220238.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:18.709Z,1513220238.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:19.125Z,1513220239.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:19.192Z,1513220239.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:19.508Z,1513220239.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:19.523Z,1513220239.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:19.894Z,1513220239.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:19.927Z,1513220239.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:23.705Z,1513220243.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:23.815Z,1513220243.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:23.911Z,1513220243.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:23.930Z,1513220243.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:24.276Z,1513220244.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:24.296Z,1513220244.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:24.689Z,1513220244.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:24.744Z,1513220244.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:25.085Z,1513220245.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:25.108Z,1513220245.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:25.470Z,1513220245.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:25.540Z,1513220245.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:25.871Z,1513220245.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:25.907Z,1513220245.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:26.260Z,1513220246.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:26.288Z,1513220246.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:26.670Z,1513220246.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:26.726Z,1513220246.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:27.063Z,1513220247.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:27.098Z,1513220247.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:27.473Z,1513220247.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:27.503Z,1513220247.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:27.890Z,1513220247.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:27.904Z,1513220247.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:28.286Z,1513220248.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:28.308Z,1513220248.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:28.663Z,1513220248.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:28.690Z,1513220248.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:29.090Z,1513220249.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:29.105Z,1513220249.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:29.472Z,1513220249.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:29.503Z,1513220249.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:29.863Z,1513220249.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:29.899Z,1513220249.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:30.282Z,1513220250.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:30.311Z,1513220250.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:30.686Z,1513220250.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:30.719Z,1513220250.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:31.083Z,1513220251.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:31.106Z,1513220251.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:31.471Z,1513220251.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:31.511Z,1513220251.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:31.871Z,1513220251.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:31.887Z,1513220251.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:32.270Z,1513220252.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:32.310Z,1513220252.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:32.669Z,1513220252.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:32.684Z,1513220252.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:33.130Z,1513220253.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:33.220Z,1513220253.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:33.483Z,1513220253.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:33.517Z,1513220253.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:33.877Z,1513220253.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:33.916Z,1513220253.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:34.275Z,1513220254.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:34.315Z,1513220254.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:34.670Z,1513220254.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:34.685Z,1513220254.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:35.085Z,1513220255.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:35.185Z,1513220255.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:35.486Z,1513220255.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:35.507Z,1513220255.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:35.884Z,1513220255.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:35.900Z,1513220255.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:36.273Z,1513220256.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:36.287Z,1513220256.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:36.675Z,1513220256.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:36.695Z,1513220256.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:37.083Z,1513220257.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:37.098Z,1513220257.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:37.486Z,1513220257.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:37.507Z,1513220257.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:37.888Z,1513220257.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:37.903Z,1513220257.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:38.273Z,1513220258.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:38.296Z,1513220258.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:38.662Z,1513220258.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:38.691Z,1513220258.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:39.087Z,1513220259.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:39.111Z,1513220259.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:39.491Z,1513220259.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:39.511Z,1513220259.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:39.882Z,1513220259.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:39.900Z,1513220259.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:40.261Z,1513220260.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:40.292Z,1513220260.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:40.667Z,1513220260.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:40.691Z,1513220260.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:41.072Z,1513220261.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:41.096Z,1513220261.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:41.483Z,1513220261.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:41.506Z,1513220261.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:41.878Z,1513220261.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:41.903Z,1513220261.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:42.268Z,1513220262.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:42.283Z,1513220262.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:42.668Z,1513220262.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:42.683Z,1513220262.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:43.072Z,1513220263.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:43.087Z,1513220263.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:43.478Z,1513220263.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:43.493Z,1513220263.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:43.885Z,1513220263.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:43.899Z,1513220263.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:44.285Z,1513220264.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:44.300Z,1513220264.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:44.671Z,1513220264.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:44.685Z,1513220264.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:45.071Z,1513220265.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:45.091Z,1513220265.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:45.467Z,1513220265.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:45.486Z,1513220265.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:45.872Z,1513220265.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:45.887Z,1513220265.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:46.282Z,1513220266.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:46.378Z,1513220266.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:46.686Z,1513220266.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:46.701Z,1513220266.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:47.083Z,1513220267.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:47.197Z,1513220267.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:47.463Z,1513220267.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:47.500Z,1513220267.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:47.867Z,1513220267.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:47.919Z,1513220267.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:48.263Z,1513220268.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:48.277Z,1513220268.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:48.656Z,1513220268.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:48.671Z,1513220268.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:49.078Z,1513220269.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:49.104Z,1513220269.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:49.494Z,1513220269.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:49.509Z,1513220269.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:49.884Z,1513220269.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:49.940Z,1513220269.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:50.268Z,1513220270.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:50.299Z,1513220270.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:50.667Z,1513220270.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:50.702Z,1513220270.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:51.082Z,1513220271.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:51.096Z,1513220271.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:51.485Z,1513220271.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:51.500Z,1513220271.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:51.881Z,1513220271.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:51.896Z,1513220271.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:52.276Z,1513220272.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:52.291Z,1513220272.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:52.674Z,1513220272.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:52.689Z,1513220272.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:53.081Z,1513220273.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:53.134Z,1513220273.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:53.486Z,1513220273.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:53.507Z,1513220273.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:53.885Z,1513220273.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:53.900Z,1513220273.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:54.277Z,1513220274.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:54.291Z,1513220274.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:54.676Z,1513220274.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:54.690Z,1513220274.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:55.081Z,1513220275.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:55.096Z,1513220275.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:55.484Z,1513220275.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:55.499Z,1513220275.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:55.886Z,1513220275.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:55.900Z,1513220275.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:56.312Z,1513220276.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:56.379Z,1513220276.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:56.666Z,1513220276.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:56.691Z,1513220276.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:57.078Z,1513220277.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:57.094Z,1513220277.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:57.486Z,1513220277.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:57.500Z,1513220277.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:57.878Z,1513220277.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:57.898Z,1513220277.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:58.267Z,1513220278.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:58.299Z,1513220278.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:58.669Z,1513220278.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:58.695Z,1513220278.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:59.063Z,1513220279.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:59.099Z,1513220279.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:59.516Z,1513220279.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:59.562Z,1513220279.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:57:59.885Z,1513220279.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:57:59.900Z,1513220279.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:00.282Z,1513220280.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:00.303Z,1513220280.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:00.664Z,1513220280.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:00.695Z,1513220280.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:01.068Z,1513220281.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:01.094Z,1513220281.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:01.465Z,1513220281.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:01.493Z,1513220281.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:01.867Z,1513220281.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:01.906Z,1513220281.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:02.278Z,1513220282.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:02.447Z,1513220282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:02.692Z,1513220282.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:02.719Z,1513220282.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:03.085Z,1513220283.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:03.183Z,1513220283.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:03.473Z,1513220283.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:03.488Z,1513220283.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:03.868Z,1513220283.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:03.888Z,1513220283.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:04.272Z,1513220284.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:04.286Z,1513220284.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:04.670Z,1513220284.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:04.685Z,1513220284.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:05.081Z,1513220285.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:05.096Z,1513220285.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:05.482Z,1513220285.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:05.496Z,1513220285.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:05.904Z,1513220285.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:05.934Z,1513220285.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:06.269Z,1513220286.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:06.293Z,1513220286.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:06.669Z,1513220286.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:06.692Z,1513220286.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:07.098Z,1513220287.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:07.133Z,1513220287.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:07.485Z,1513220287.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:07.500Z,1513220287.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:07.886Z,1513220287.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:07.901Z,1513220287.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:08.276Z,1513220288.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:08.339Z,1513220288.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:08.667Z,1513220288.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:08.694Z,1513220288.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:09.116Z,1513220289.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:09.151Z,1513220289.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:09.486Z,1513220289.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:09.501Z,1513220289.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:09.891Z,1513220289.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:09.906Z,1513220289.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:10.264Z,1513220290.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:10.298Z,1513220290.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:10.667Z,1513220290.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:10.699Z,1513220290.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:11.082Z,1513220291.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:11.098Z,1513220291.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:11.487Z,1513220291.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:11.496Z,1513220291.496 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:58:11.496Z,1513220291.496 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:58:11.496Z,1513220291.496 [BPC1](ERROR): Communications Fault
2017-12-14T02:58:11.533Z,1513220291.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:11.547Z,1513220291.547 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:58:11.874Z,1513220291.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:11.930Z,1513220291.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:12.266Z,1513220292.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:12.306Z,1513220292.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:12.671Z,1513220292.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:12.701Z,1513220292.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:12.714Z,1513220292.714 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:58:12.714Z,1513220292.714 [BPC1] No Fault, FailCount= 1
2017-12-14T02:58:13.074Z,1513220293.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:13.151Z,1513220293.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:13.497Z,1513220293.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:13.511Z,1513220293.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:13.881Z,1513220293.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:13.912Z,1513220293.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:14.269Z,1513220294.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:14.284Z,1513220294.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:14.668Z,1513220294.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:14.684Z,1513220294.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:15.083Z,1513220295.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:15.174Z,1513220295.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:15.525Z,1513220295.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:15.554Z,1513220295.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:15.886Z,1513220295.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:15.901Z,1513220295.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:16.263Z,1513220296.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:16.290Z,1513220296.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:16.678Z,1513220296.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:16.694Z,1513220296.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:17.062Z,1513220297.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:17.099Z,1513220297.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:17.486Z,1513220297.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:17.513Z,1513220297.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:17.877Z,1513220297.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:17.910Z,1513220297.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:18.281Z,1513220298.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:18.318Z,1513220298.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:18.730Z,1513220298.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:18.859Z,1513220298.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:19.071Z,1513220299.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:19.086Z,1513220299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:19.466Z,1513220299.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:19.486Z,1513220299.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:19.867Z,1513220299.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:19.881Z,1513220299.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:20.278Z,1513220300.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:20.292Z,1513220300.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:23.767Z,1513220303.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:23.821Z,1513220303.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:23.926Z,1513220303.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:23.967Z,1513220303.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:24.275Z,1513220304.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:24.290Z,1513220304.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:24.682Z,1513220304.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:24.697Z,1513220304.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:25.078Z,1513220305.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:25.092Z,1513220305.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:25.484Z,1513220305.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:25.499Z,1513220305.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:25.886Z,1513220305.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:25.901Z,1513220305.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:26.284Z,1513220306.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:26.299Z,1513220306.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:26.675Z,1513220306.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:26.698Z,1513220306.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:27.086Z,1513220307.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:27.107Z,1513220307.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:27.488Z,1513220307.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:27.504Z,1513220307.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:27.885Z,1513220307.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:27.900Z,1513220307.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:28.298Z,1513220308.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:28.359Z,1513220308.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:28.673Z,1513220308.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:28.692Z,1513220308.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:29.087Z,1513220309.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:29.163Z,1513220309.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:29.490Z,1513220309.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:29.515Z,1513220309.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:29.878Z,1513220309.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:29.912Z,1513220309.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:30.267Z,1513220310.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:30.298Z,1513220310.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:30.670Z,1513220310.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:30.709Z,1513220310.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:31.082Z,1513220311.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:31.179Z,1513220311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:31.514Z,1513220311.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:31.561Z,1513220311.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:31.898Z,1513220311.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:31.913Z,1513220311.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:32.276Z,1513220312.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:32.306Z,1513220312.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:32.674Z,1513220312.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:32.716Z,1513220312.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:33.077Z,1513220313.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:33.108Z,1513220313.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:33.477Z,1513220313.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:33.492Z,1513220313.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:33.886Z,1513220313.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:33.916Z,1513220313.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:34.276Z,1513220314.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:34.338Z,1513220314.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:34.715Z,1513220314.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:34.739Z,1513220314.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:35.084Z,1513220315.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:35.099Z,1513220315.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:35.485Z,1513220315.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:35.500Z,1513220315.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:35.885Z,1513220315.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:35.935Z,1513220315.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:36.270Z,1513220316.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:36.293Z,1513220316.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:36.676Z,1513220316.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:36.715Z,1513220316.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:37.067Z,1513220317.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:37.104Z,1513220317.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:37.477Z,1513220317.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:37.510Z,1513220317.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:37.890Z,1513220317.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:37.904Z,1513220317.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:38.278Z,1513220318.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:38.292Z,1513220318.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:38.671Z,1513220318.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:38.687Z,1513220318.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:39.075Z,1513220319.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:39.090Z,1513220319.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:39.471Z,1513220319.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:39.486Z,1513220319.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:39.875Z,1513220319.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:39.895Z,1513220319.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:40.277Z,1513220320.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:40.299Z,1513220320.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:40.678Z,1513220320.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:40.692Z,1513220320.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:41.115Z,1513220321.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:41.143Z,1513220321.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:41.475Z,1513220321.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:41.500Z,1513220321.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:41.872Z,1513220321.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:41.887Z,1513220321.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:42.317Z,1513220322.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:42.332Z,1513220322.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:42.677Z,1513220322.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:42.691Z,1513220322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:43.082Z,1513220323.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:43.103Z,1513220323.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:43.482Z,1513220323.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:43.519Z,1513220323.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:43.880Z,1513220323.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:43.912Z,1513220323.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:44.281Z,1513220324.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:44.326Z,1513220324.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:44.674Z,1513220324.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:44.689Z,1513220324.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:45.085Z,1513220325.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:45.207Z,1513220325.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:45.490Z,1513220325.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:45.504Z,1513220325.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:45.886Z,1513220325.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:45.901Z,1513220325.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:46.280Z,1513220326.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:46.295Z,1513220326.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:46.674Z,1513220326.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:46.695Z,1513220326.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:47.078Z,1513220327.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:47.093Z,1513220327.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:47.506Z,1513220327.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:47.537Z,1513220327.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:47.878Z,1513220327.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:47.909Z,1513220327.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:48.275Z,1513220328.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:48.291Z,1513220328.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:48.673Z,1513220328.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:48.688Z,1513220328.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:49.094Z,1513220329.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:49.119Z,1513220329.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:49.494Z,1513220329.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:49.519Z,1513220329.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:49.889Z,1513220329.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:49.919Z,1513220329.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:50.268Z,1513220330.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:50.283Z,1513220330.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:50.689Z,1513220330.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:50.729Z,1513220330.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:51.086Z,1513220331.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:51.101Z,1513220331.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:51.491Z,1513220331.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:51.506Z,1513220331.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:51.894Z,1513220331.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:51.918Z,1513220331.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:52.284Z,1513220332.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:52.307Z,1513220332.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:52.671Z,1513220332.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:52.707Z,1513220332.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:53.099Z,1513220333.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:53.114Z,1513220333.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:53.491Z,1513220333.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:53.508Z,1513220333.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:53.887Z,1513220333.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:53.906Z,1513220333.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:54.276Z,1513220334.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:54.304Z,1513220334.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:54.675Z,1513220334.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:54.693Z,1513220334.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:55.078Z,1513220335.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:55.100Z,1513220335.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:55.481Z,1513220335.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:55.503Z,1513220335.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:55.886Z,1513220335.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:55.902Z,1513220335.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:56.284Z,1513220336.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:56.298Z,1513220336.298 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T02:58:56.299Z,1513220336.299 [BPC1] Data Fault, FailCount= 1
2017-12-14T02:58:56.299Z,1513220336.299 [BPC1](ERROR): Data Fault
2017-12-14T02:58:56.307Z,1513220336.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:56.350Z,1513220336.350 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T02:58:56.674Z,1513220336.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:56.693Z,1513220336.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:57.155Z,1513220337.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:57.252Z,1513220337.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:57.489Z,1513220337.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:57.504Z,1513220337.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:57.521Z,1513220337.521 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:58:57.521Z,1513220337.521 [BPC1] No Fault, FailCount= 1
2017-12-14T02:58:57.877Z,1513220337.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:57.963Z,1513220337.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:58.267Z,1513220338.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:58.306Z,1513220338.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:58.668Z,1513220338.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:58.698Z,1513220338.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:59.078Z,1513220339.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:59.104Z,1513220339.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:59.485Z,1513220339.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:59.514Z,1513220339.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:58:59.881Z,1513220339.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:58:59.912Z,1513220339.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:00.273Z,1513220340.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:00.287Z,1513220340.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:00.682Z,1513220340.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:00.718Z,1513220340.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:01.089Z,1513220341.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:01.120Z,1513220341.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:01.151Z,1513220341.151 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T02:59:01.486Z,1513220341.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:01.523Z,1513220341.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:01.881Z,1513220341.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:01.903Z,1513220341.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:02.267Z,1513220342.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:02.286Z,1513220342.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:02.678Z,1513220342.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:02.692Z,1513220342.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:03.081Z,1513220343.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:03.103Z,1513220343.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:03.497Z,1513220343.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:03.532Z,1513220343.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:03.580Z,1513220343.580 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T02:59:03.589Z,1513220343.589 [DropWeight] No Fault, FailCount= 1
2017-12-14T02:59:03.884Z,1513220343.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:03.903Z,1513220343.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:04.280Z,1513220344.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:04.295Z,1513220344.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:04.684Z,1513220344.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:04.699Z,1513220344.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:05.083Z,1513220345.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:05.107Z,1513220345.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:05.486Z,1513220345.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:05.507Z,1513220345.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:05.886Z,1513220345.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:05.900Z,1513220345.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:06.281Z,1513220346.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:06.328Z,1513220346.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:06.675Z,1513220346.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:06.691Z,1513220346.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:07.084Z,1513220347.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:07.108Z,1513220347.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:07.489Z,1513220347.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:07.504Z,1513220347.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:07.890Z,1513220347.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:07.904Z,1513220347.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:08.280Z,1513220348.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:08.294Z,1513220348.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:08.681Z,1513220348.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:08.695Z,1513220348.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:09.082Z,1513220349.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:09.109Z,1513220349.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:09.481Z,1513220349.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:09.512Z,1513220349.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:09.885Z,1513220349.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:09.912Z,1513220349.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:10.267Z,1513220350.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:10.303Z,1513220350.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:10.668Z,1513220350.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:10.694Z,1513220350.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:11.087Z,1513220351.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:11.101Z,1513220351.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:11.486Z,1513220351.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:11.517Z,1513220351.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:11.885Z,1513220351.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:11.901Z,1513220351.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:12.267Z,1513220352.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:12.304Z,1513220352.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:12.671Z,1513220352.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:12.696Z,1513220352.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:13.094Z,1513220353.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:13.198Z,1513220353.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:13.486Z,1513220353.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:13.509Z,1513220353.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:13.885Z,1513220353.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:13.955Z,1513220353.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:14.274Z,1513220354.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:14.289Z,1513220354.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:14.675Z,1513220354.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:14.689Z,1513220354.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:15.088Z,1513220355.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:15.118Z,1513220355.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:15.487Z,1513220355.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:15.518Z,1513220355.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:15.890Z,1513220355.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:15.914Z,1513220355.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:16.272Z,1513220356.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:16.287Z,1513220356.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:16.683Z,1513220356.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:16.716Z,1513220356.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:17.080Z,1513220357.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:17.135Z,1513220357.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:17.490Z,1513220357.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:17.506Z,1513220357.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:17.886Z,1513220357.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:17.909Z,1513220357.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:18.267Z,1513220358.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:18.312Z,1513220358.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:18.667Z,1513220358.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:18.699Z,1513220358.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:19.077Z,1513220359.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:19.103Z,1513220359.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:19.107Z,1513220359.107 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T02:59:19.107Z,1513220359.107 [Default:CheckIn:C.Wait] Stopped
2017-12-14T02:59:19.107Z,1513220359.107 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T02:59:19.107Z,1513220359.107 [Default:CheckIn:D] Running Loop=1
2017-12-14T02:59:19.491Z,1513220359.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:19.567Z,1513220359.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:19.575Z,1513220359.575 [Default:CheckIn:D] Stopped
2017-12-14T02:59:19.575Z,1513220359.575 [Default:CheckIn:E] Running Loop=1
2017-12-14T02:59:19.890Z,1513220359.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:19.919Z,1513220359.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 146.069743 min 
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn:E] Stopped
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn] Stopped
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T02:59:19.923Z,1513220359.923 [Default:CheckIn](INFO): Running loop #15
2017-12-14T02:59:19.924Z,1513220359.924 [Default:CheckIn] Running Loop=15
2017-12-14T02:59:19.924Z,1513220359.924 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T02:59:19.924Z,1513220359.924 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T02:59:20.277Z,1513220360.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:20.331Z,1513220360.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:23.760Z,1513220363.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:23.776Z,1513220363.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:23.882Z,1513220363.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:23.914Z,1513220363.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:24.256Z,1513220364.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:24.275Z,1513220364.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:24.656Z,1513220364.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:24.679Z,1513220364.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:25.029Z,1513220365.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:25.044Z,1513220365.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:25.435Z,1513220365.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:25.469Z,1513220365.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:25.831Z,1513220365.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:25.868Z,1513220365.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:26.234Z,1513220366.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:26.263Z,1513220366.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:26.648Z,1513220366.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:26.662Z,1513220366.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:27.053Z,1513220367.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:27.068Z,1513220367.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:27.436Z,1513220367.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:27.467Z,1513220367.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:27.834Z,1513220367.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:27.848Z,1513220367.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:28.230Z,1513220368.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:28.245Z,1513220368.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:28.631Z,1513220368.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:28.676Z,1513220368.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:29.033Z,1513220369.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:29.049Z,1513220369.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:29.448Z,1513220369.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:29.472Z,1513220369.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:29.843Z,1513220369.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:29.875Z,1513220369.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:30.237Z,1513220370.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:30.271Z,1513220370.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:30.629Z,1513220370.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:30.643Z,1513220370.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:31.030Z,1513220371.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:31.045Z,1513220371.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:31.434Z,1513220371.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:31.449Z,1513220371.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:31.830Z,1513220371.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:31.846Z,1513220371.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:32.245Z,1513220372.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:32.311Z,1513220372.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:32.664Z,1513220372.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:32.678Z,1513220372.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:33.041Z,1513220373.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:33.055Z,1513220373.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:33.429Z,1513220373.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:33.450Z,1513220373.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:33.828Z,1513220373.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:33.847Z,1513220373.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:34.228Z,1513220374.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:34.242Z,1513220374.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:34.634Z,1513220374.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:34.649Z,1513220374.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:35.041Z,1513220375.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:35.056Z,1513220375.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:35.435Z,1513220375.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:35.449Z,1513220375.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:35.837Z,1513220375.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:35.853Z,1513220375.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:36.245Z,1513220376.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:36.276Z,1513220376.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:36.633Z,1513220376.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:36.655Z,1513220376.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:37.039Z,1513220377.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:37.075Z,1513220377.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:37.431Z,1513220377.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:37.446Z,1513220377.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:37.832Z,1513220377.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:37.907Z,1513220377.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:38.234Z,1513220378.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:38.249Z,1513220378.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:38.637Z,1513220378.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:38.659Z,1513220378.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:39.053Z,1513220379.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:39.162Z,1513220379.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:39.438Z,1513220379.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:39.453Z,1513220379.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:39.823Z,1513220379.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:39.851Z,1513220379.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:40.227Z,1513220380.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:40.254Z,1513220380.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:40.628Z,1513220380.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:40.653Z,1513220380.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:41.023Z,1513220381.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:41.053Z,1513220381.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:41.451Z,1513220381.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:41.467Z,1513220381.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:41.872Z,1513220381.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:41.904Z,1513220381.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:42.233Z,1513220382.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:42.271Z,1513220382.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:42.623Z,1513220382.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:42.661Z,1513220382.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:43.023Z,1513220383.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:43.058Z,1513220383.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:43.425Z,1513220383.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:43.448Z,1513220383.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:43.824Z,1513220383.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:43.832Z,1513220383.832 [BPC1](ERROR): Failed to receive battery data
2017-12-14T02:59:43.832Z,1513220383.832 [BPC1] Communications Fault, FailCount= 1
2017-12-14T02:59:43.832Z,1513220383.832 [BPC1](ERROR): Communications Fault
2017-12-14T02:59:43.840Z,1513220383.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:43.889Z,1513220383.889 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T02:59:44.239Z,1513220384.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:44.265Z,1513220384.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:44.637Z,1513220384.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:44.671Z,1513220384.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:44.671Z,1513220384.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2017-12-14T02:59:44.671Z,1513220384.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T02:59:44.673Z,1513220384.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:44.673Z,1513220384.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2017-12-14T02:59:44.673Z,1513220384.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T02:59:44.675Z,1513220384.675 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:44.675Z,1513220384.675 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2017-12-14T02:59:44.675Z,1513220384.675 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T02:59:44.687Z,1513220384.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T02:59:44.687Z,1513220384.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T02:59:44.687Z,1513220384.687 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T02:59:45.072Z,1513220385.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:45.127Z,1513220385.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T02:59:45.127Z,1513220385.127 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2017-12-14T02:59:45.127Z,1513220385.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T02:59:45.128Z,1513220385.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2017-12-14T02:59:45.128Z,1513220385.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T02:59:45.128Z,1513220385.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2017-12-14T02:59:45.129Z,1513220385.129 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T02:59:45.129Z,1513220385.129 [BPC1] No Fault, FailCount= 1
2017-12-14T02:59:45.433Z,1513220385.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:45.513Z,1513220385.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T02:59:45.514Z,1513220385.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:59:45.514Z,1513220385.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:59:45.514Z,1513220385.514 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T02:59:45.515Z,1513220385.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:59:45.515Z,1513220385.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:59:45.515Z,1513220385.515 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T02:59:45.516Z,1513220385.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T02:59:45.516Z,1513220385.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T02:59:45.829Z,1513220385.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:45.843Z,1513220385.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:46.232Z,1513220386.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:46.247Z,1513220386.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:46.632Z,1513220386.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:46.648Z,1513220386.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:47.036Z,1513220387.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:47.050Z,1513220387.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:47.473Z,1513220387.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:47.489Z,1513220387.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:47.842Z,1513220387.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:47.872Z,1513220387.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:48.241Z,1513220388.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:48.324Z,1513220388.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:48.629Z,1513220388.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:48.643Z,1513220388.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:49.032Z,1513220389.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:49.048Z,1513220389.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:49.428Z,1513220389.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:49.451Z,1513220389.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:49.833Z,1513220389.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:49.848Z,1513220389.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:50.246Z,1513220390.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:50.276Z,1513220390.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:50.645Z,1513220390.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:50.676Z,1513220390.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:51.037Z,1513220391.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:51.052Z,1513220391.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:51.454Z,1513220391.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:51.481Z,1513220391.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:51.831Z,1513220391.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:51.851Z,1513220391.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:52.232Z,1513220392.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:52.247Z,1513220392.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:52.630Z,1513220392.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:52.658Z,1513220392.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:53.035Z,1513220393.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:53.055Z,1513220393.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:53.440Z,1513220393.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:53.465Z,1513220393.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:53.843Z,1513220393.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:53.891Z,1513220393.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:54.238Z,1513220394.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:54.258Z,1513220394.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:54.666Z,1513220394.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:54.714Z,1513220394.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:55.027Z,1513220395.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:55.054Z,1513220395.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:55.432Z,1513220395.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:55.467Z,1513220395.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:55.832Z,1513220395.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:55.846Z,1513220395.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:56.238Z,1513220396.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:56.273Z,1513220396.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:56.646Z,1513220396.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:56.672Z,1513220396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:57.060Z,1513220397.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:57.080Z,1513220397.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:57.432Z,1513220397.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:57.447Z,1513220397.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:57.861Z,1513220397.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:57.896Z,1513220397.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:58.223Z,1513220398.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:58.253Z,1513220398.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:58.628Z,1513220398.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:58.660Z,1513220398.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:59.023Z,1513220399.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:59.059Z,1513220399.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:59.442Z,1513220399.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:59.467Z,1513220399.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T02:59:59.850Z,1513220399.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T02:59:59.870Z,1513220399.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:00.233Z,1513220400.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:00.269Z,1513220400.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:00.627Z,1513220400.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:00.661Z,1513220400.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:01.064Z,1513220401.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:01.079Z,1513220401.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:01.440Z,1513220401.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:01.472Z,1513220401.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:01.827Z,1513220401.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:01.860Z,1513220401.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:02.246Z,1513220402.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:02.275Z,1513220402.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:02.641Z,1513220402.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:02.673Z,1513220402.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:03.046Z,1513220403.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:03.077Z,1513220403.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:03.439Z,1513220403.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:03.456Z,1513220403.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:03.835Z,1513220403.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:03.855Z,1513220403.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:04.257Z,1513220404.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:04.308Z,1513220404.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:04.626Z,1513220404.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:04.662Z,1513220404.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:05.033Z,1513220405.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:05.086Z,1513220405.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:05.447Z,1513220405.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:05.462Z,1513220405.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:05.847Z,1513220405.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:05.896Z,1513220405.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:06.247Z,1513220406.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:06.262Z,1513220406.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:06.639Z,1513220406.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:06.654Z,1513220406.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:07.035Z,1513220407.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:07.053Z,1513220407.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:07.424Z,1513220407.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:07.450Z,1513220407.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:07.823Z,1513220407.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:07.861Z,1513220407.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:08.241Z,1513220408.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:08.270Z,1513220408.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:08.651Z,1513220408.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:08.672Z,1513220408.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:09.048Z,1513220409.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:09.063Z,1513220409.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:09.435Z,1513220409.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:09.470Z,1513220409.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:09.830Z,1513220409.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:09.845Z,1513220409.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:10.227Z,1513220410.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:10.242Z,1513220410.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:10.688Z,1513220410.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:10.833Z,1513220410.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:11.037Z,1513220411.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:11.052Z,1513220411.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:11.438Z,1513220411.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:11.471Z,1513220411.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:11.837Z,1513220411.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:11.880Z,1513220411.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:12.240Z,1513220412.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:12.256Z,1513220412.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:12.636Z,1513220412.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:12.650Z,1513220412.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:13.033Z,1513220413.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:13.048Z,1513220413.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:13.442Z,1513220413.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:13.456Z,1513220413.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:13.836Z,1513220413.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:13.851Z,1513220413.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:14.237Z,1513220414.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:14.288Z,1513220414.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:14.641Z,1513220414.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:14.656Z,1513220414.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:15.042Z,1513220415.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:15.059Z,1513220415.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:15.431Z,1513220415.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:15.450Z,1513220415.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:15.831Z,1513220415.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:15.850Z,1513220415.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:16.232Z,1513220416.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:16.247Z,1513220416.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:16.631Z,1513220416.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:16.646Z,1513220416.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:17.030Z,1513220417.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:17.050Z,1513220417.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:17.442Z,1513220417.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:17.459Z,1513220417.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:17.842Z,1513220417.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:17.857Z,1513220417.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:18.235Z,1513220418.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:18.272Z,1513220418.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:18.636Z,1513220418.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:18.651Z,1513220418.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:19.023Z,1513220419.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:19.048Z,1513220419.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:19.423Z,1513220419.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:19.454Z,1513220419.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:19.827Z,1513220419.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:19.854Z,1513220419.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:20.234Z,1513220420.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:20.261Z,1513220420.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:20.643Z,1513220420.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:20.666Z,1513220420.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:24.178Z,1513220424.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:24.202Z,1513220424.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:24.315Z,1513220424.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:24.402Z,1513220424.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:24.658Z,1513220424.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:24.673Z,1513220424.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:25.065Z,1513220425.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:25.080Z,1513220425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:25.462Z,1513220425.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:25.542Z,1513220425.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:25.863Z,1513220425.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:25.878Z,1513220425.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:26.265Z,1513220426.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:26.315Z,1513220426.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:26.671Z,1513220426.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:26.691Z,1513220426.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:27.067Z,1513220427.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:27.112Z,1513220427.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:27.464Z,1513220427.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:27.479Z,1513220427.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:27.851Z,1513220427.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:27.877Z,1513220427.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:28.252Z,1513220428.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:28.278Z,1513220428.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:28.656Z,1513220428.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:28.683Z,1513220428.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:29.051Z,1513220429.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:29.077Z,1513220429.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:29.470Z,1513220429.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:29.486Z,1513220429.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:29.874Z,1513220429.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:29.889Z,1513220429.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:30.275Z,1513220430.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:30.290Z,1513220430.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:30.684Z,1513220430.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:30.723Z,1513220430.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:31.051Z,1513220431.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:31.094Z,1513220431.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:31.452Z,1513220431.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:31.467Z,1513220431.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:31.855Z,1513220431.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:31.891Z,1513220431.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:32.257Z,1513220432.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:32.272Z,1513220432.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:32.674Z,1513220432.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:32.699Z,1513220432.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:33.074Z,1513220433.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:33.099Z,1513220433.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:33.463Z,1513220433.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:33.478Z,1513220433.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:33.859Z,1513220433.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:33.879Z,1513220433.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:34.262Z,1513220434.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:34.277Z,1513220434.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:34.660Z,1513220434.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:34.675Z,1513220434.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:35.074Z,1513220435.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:35.160Z,1513220435.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:35.469Z,1513220435.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:35.516Z,1513220435.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:35.870Z,1513220435.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:35.886Z,1513220435.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:36.264Z,1513220436.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:36.278Z,1513220436.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:36.659Z,1513220436.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:36.678Z,1513220436.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:37.068Z,1513220437.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:37.088Z,1513220437.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:37.482Z,1513220437.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:37.503Z,1513220437.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:37.878Z,1513220437.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:37.901Z,1513220437.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:38.279Z,1513220438.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:38.295Z,1513220438.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:38.655Z,1513220438.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:38.686Z,1513220438.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:39.063Z,1513220439.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:39.089Z,1513220439.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:39.453Z,1513220439.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:39.490Z,1513220439.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:39.857Z,1513220439.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:39.886Z,1513220439.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:40.262Z,1513220440.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:40.303Z,1513220440.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:40.668Z,1513220440.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:40.692Z,1513220440.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:41.078Z,1513220441.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:41.127Z,1513220441.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:41.459Z,1513220441.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:41.483Z,1513220441.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:41.866Z,1513220441.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:41.881Z,1513220441.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:42.266Z,1513220442.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:42.280Z,1513220442.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:42.658Z,1513220442.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:42.681Z,1513220442.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:43.061Z,1513220443.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:43.083Z,1513220443.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:43.483Z,1513220443.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:43.515Z,1513220443.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:43.870Z,1513220443.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:43.891Z,1513220443.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:44.271Z,1513220444.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:44.286Z,1513220444.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:44.669Z,1513220444.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:44.684Z,1513220444.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:45.065Z,1513220445.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:45.080Z,1513220445.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:45.463Z,1513220445.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:45.478Z,1513220445.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:45.867Z,1513220445.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:45.882Z,1513220445.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:46.269Z,1513220446.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:46.316Z,1513220446.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:46.675Z,1513220446.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:46.691Z,1513220446.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:47.073Z,1513220447.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:47.088Z,1513220447.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:47.463Z,1513220447.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:47.523Z,1513220447.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:47.860Z,1513220447.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:47.876Z,1513220447.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:48.258Z,1513220448.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:48.318Z,1513220448.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:48.658Z,1513220448.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:48.681Z,1513220448.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:49.062Z,1513220449.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:49.096Z,1513220449.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:49.465Z,1513220449.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:49.480Z,1513220449.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:49.882Z,1513220449.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:49.913Z,1513220449.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:50.269Z,1513220450.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:50.283Z,1513220450.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:50.660Z,1513220450.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:50.675Z,1513220450.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:51.067Z,1513220451.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:51.082Z,1513220451.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:51.452Z,1513220451.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:51.479Z,1513220451.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:51.863Z,1513220451.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:51.883Z,1513220451.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:52.270Z,1513220452.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:52.285Z,1513220452.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:52.675Z,1513220452.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:52.689Z,1513220452.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:53.086Z,1513220453.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:53.122Z,1513220453.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:53.452Z,1513220453.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:53.479Z,1513220453.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:53.852Z,1513220453.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:53.879Z,1513220453.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:54.248Z,1513220454.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:54.287Z,1513220454.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:54.656Z,1513220454.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:54.682Z,1513220454.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:55.051Z,1513220455.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:55.086Z,1513220455.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:55.461Z,1513220455.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:55.495Z,1513220455.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:55.878Z,1513220455.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:55.893Z,1513220455.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:56.293Z,1513220456.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:56.338Z,1513220456.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:56.656Z,1513220456.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:56.703Z,1513220456.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:57.067Z,1513220457.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:57.096Z,1513220457.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:57.457Z,1513220457.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:57.472Z,1513220457.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:57.857Z,1513220457.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:57.872Z,1513220457.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:58.271Z,1513220458.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:58.301Z,1513220458.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:58.678Z,1513220458.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:58.703Z,1513220458.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:59.070Z,1513220459.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:59.084Z,1513220459.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:59.468Z,1513220459.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:59.496Z,1513220459.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:00:59.851Z,1513220459.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:00:59.888Z,1513220459.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:00.246Z,1513220460.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:00.269Z,1513220460.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:00.657Z,1513220460.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:00.688Z,1513220460.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:01.051Z,1513220461.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:01.089Z,1513220461.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:01.458Z,1513220461.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:01.485Z,1513220461.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:01.873Z,1513220461.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:01.896Z,1513220461.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:02.265Z,1513220462.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:02.291Z,1513220462.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:02.652Z,1513220462.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:02.731Z,1513220462.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:03.057Z,1513220463.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:03.072Z,1513220463.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:03.460Z,1513220463.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:03.474Z,1513220463.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:03.856Z,1513220463.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:03.883Z,1513220463.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:04.274Z,1513220464.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:04.288Z,1513220464.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:04.669Z,1513220464.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:04.691Z,1513220464.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:05.066Z,1513220465.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:05.087Z,1513220465.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:05.459Z,1513220465.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:05.486Z,1513220465.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:05.902Z,1513220465.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:05.958Z,1513220465.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:06.256Z,1513220466.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:06.281Z,1513220466.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:06.651Z,1513220466.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:06.683Z,1513220466.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:07.075Z,1513220467.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:07.107Z,1513220467.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:07.476Z,1513220467.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:07.491Z,1513220467.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:07.862Z,1513220467.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:07.895Z,1513220467.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:08.255Z,1513220468.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:08.291Z,1513220468.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:08.655Z,1513220468.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:08.712Z,1513220468.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:09.076Z,1513220469.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:09.124Z,1513220469.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:09.473Z,1513220469.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:09.523Z,1513220469.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:09.870Z,1513220469.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:09.902Z,1513220469.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:10.259Z,1513220470.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:10.311Z,1513220470.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:10.658Z,1513220470.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:10.672Z,1513220470.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:11.062Z,1513220471.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:11.076Z,1513220471.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:11.474Z,1513220471.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:11.496Z,1513220471.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:11.873Z,1513220471.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:11.899Z,1513220471.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:12.268Z,1513220472.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:12.310Z,1513220472.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:12.658Z,1513220472.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:12.679Z,1513220472.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:13.058Z,1513220473.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:13.083Z,1513220473.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:13.462Z,1513220473.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:13.477Z,1513220473.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:13.865Z,1513220473.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:13.880Z,1513220473.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:14.273Z,1513220474.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:14.306Z,1513220474.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:14.652Z,1513220474.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:14.674Z,1513220474.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:15.058Z,1513220475.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:15.079Z,1513220475.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:15.494Z,1513220475.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:15.523Z,1513220475.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:15.859Z,1513220475.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:15.887Z,1513220475.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:16.273Z,1513220476.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:16.318Z,1513220476.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:16.677Z,1513220476.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:16.691Z,1513220476.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:17.072Z,1513220477.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:17.158Z,1513220477.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:17.456Z,1513220477.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:17.499Z,1513220477.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:17.861Z,1513220477.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:17.903Z,1513220477.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:18.268Z,1513220478.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:18.308Z,1513220478.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:18.715Z,1513220478.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:18.780Z,1513220478.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:19.072Z,1513220479.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:19.182Z,1513220479.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:19.468Z,1513220479.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:19.512Z,1513220479.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:19.866Z,1513220479.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:19.900Z,1513220479.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:20.263Z,1513220480.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:20.291Z,1513220480.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:20.665Z,1513220480.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:20.712Z,1513220480.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:25.862Z,1513220485.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:25.892Z,1513220485.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:26.029Z,1513220486.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:26.063Z,1513220486.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:26.358Z,1513220486.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:26.395Z,1513220486.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:26.796Z,1513220486.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:26.886Z,1513220486.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:27.160Z,1513220487.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:27.175Z,1513220487.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:27.540Z,1513220487.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:27.602Z,1513220487.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:27.955Z,1513220487.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:27.970Z,1513220487.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:28.367Z,1513220488.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:28.412Z,1513220488.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:28.775Z,1513220488.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:28.889Z,1513220488.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:29.170Z,1513220489.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:29.247Z,1513220489.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:29.563Z,1513220489.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:29.587Z,1513220489.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:29.968Z,1513220489.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:30.015Z,1513220490.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:30.358Z,1513220490.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:30.376Z,1513220490.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:30.762Z,1513220490.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:30.831Z,1513220490.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:31.186Z,1513220491.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:31.237Z,1513220491.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:31.556Z,1513220491.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:31.619Z,1513220491.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:31.955Z,1513220491.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:31.990Z,1513220491.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:32.395Z,1513220492.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:32.459Z,1513220492.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:32.754Z,1513220492.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:32.799Z,1513220492.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:33.187Z,1513220493.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:33.243Z,1513220493.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:33.550Z,1513220493.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:33.575Z,1513220493.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:33.953Z,1513220493.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:34.109Z,1513220494.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:34.363Z,1513220494.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:34.416Z,1513220494.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:34.817Z,1513220494.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:34.877Z,1513220494.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:35.153Z,1513220495.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:35.203Z,1513220495.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:35.547Z,1513220495.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:35.591Z,1513220495.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:35.950Z,1513220495.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:35.996Z,1513220495.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:36.357Z,1513220496.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:36.415Z,1513220496.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:36.750Z,1513220496.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:36.850Z,1513220496.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:37.176Z,1513220497.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:37.212Z,1513220497.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:37.555Z,1513220497.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:37.597Z,1513220497.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:37.952Z,1513220497.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:37.999Z,1513220497.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:38.404Z,1513220498.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:38.440Z,1513220498.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:38.749Z,1513220498.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:38.829Z,1513220498.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:39.140Z,1513220499.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:39.172Z,1513220499.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:39.541Z,1513220499.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:39.570Z,1513220499.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:39.939Z,1513220499.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:39.977Z,1513220499.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:40.366Z,1513220500.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:40.384Z,1513220500.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:40.802Z,1513220500.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:40.872Z,1513220500.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:41.158Z,1513220501.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:41.197Z,1513220501.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:41.556Z,1513220501.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:41.632Z,1513220501.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:41.950Z,1513220501.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:41.986Z,1513220501.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:42.348Z,1513220502.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:42.364Z,1513220502.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:42.748Z,1513220502.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:42.787Z,1513220502.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:43.159Z,1513220503.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:43.179Z,1513220503.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:43.559Z,1513220503.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:43.585Z,1513220503.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:43.950Z,1513220503.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:43.985Z,1513220503.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:44.340Z,1513220504.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:44.371Z,1513220504.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:44.808Z,1513220504.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:44.855Z,1513220504.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:45.193Z,1513220505.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:45.228Z,1513220505.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:45.547Z,1513220505.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:45.562Z,1513220505.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:45.948Z,1513220505.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:45.962Z,1513220505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:46.347Z,1513220506.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:46.367Z,1513220506.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:46.759Z,1513220506.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:46.786Z,1513220506.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:47.205Z,1513220507.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:47.248Z,1513220507.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:47.553Z,1513220507.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:47.568Z,1513220507.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:47.978Z,1513220507.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:48.013Z,1513220508.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:48.364Z,1513220508.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:48.378Z,1513220508.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:48.740Z,1513220508.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:48.836Z,1513220508.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:49.163Z,1513220509.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:49.232Z,1513220509.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:49.567Z,1513220509.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:49.583Z,1513220509.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:49.951Z,1513220509.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:49.987Z,1513220509.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:50.346Z,1513220510.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:50.377Z,1513220510.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:50.744Z,1513220510.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:50.811Z,1513220510.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:51.161Z,1513220511.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:51.205Z,1513220511.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:51.540Z,1513220511.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:51.591Z,1513220511.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:51.939Z,1513220511.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:51.962Z,1513220511.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:52.354Z,1513220512.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:52.377Z,1513220512.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:52.857Z,1513220512.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:52.923Z,1513220512.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:53.164Z,1513220513.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:53.179Z,1513220513.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:53.540Z,1513220513.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:53.575Z,1513220513.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:53.944Z,1513220513.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:53.995Z,1513220513.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:54.381Z,1513220514.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:54.405Z,1513220514.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:54.748Z,1513220514.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:54.838Z,1513220514.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:55.158Z,1513220515.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:55.172Z,1513220515.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:55.563Z,1513220515.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:55.578Z,1513220515.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:55.964Z,1513220515.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:55.978Z,1513220515.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:56.351Z,1513220516.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:56.375Z,1513220516.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:56.753Z,1513220516.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:56.768Z,1513220516.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:57.139Z,1513220517.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:57.165Z,1513220517.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:57.540Z,1513220517.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:57.599Z,1513220517.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:57.946Z,1513220517.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:57.960Z,1513220517.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:58.359Z,1513220518.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:58.384Z,1513220518.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:58.759Z,1513220518.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:58.784Z,1513220518.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:59.211Z,1513220519.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:59.246Z,1513220519.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:59.539Z,1513220519.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:59.565Z,1513220519.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:01:59.939Z,1513220519.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:01:59.976Z,1513220519.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:00.340Z,1513220520.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:00.376Z,1513220520.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:00.777Z,1513220520.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:00.796Z,1513220520.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:01.191Z,1513220521.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:01.246Z,1513220521.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:01.562Z,1513220521.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:01.576Z,1513220521.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:01.955Z,1513220521.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:01.970Z,1513220521.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:02.352Z,1513220522.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:02.367Z,1513220522.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:02.751Z,1513220522.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:02.839Z,1513220522.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:03.139Z,1513220523.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:03.173Z,1513220523.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:03.540Z,1513220523.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:03.575Z,1513220523.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:03.969Z,1513220523.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:03.995Z,1513220523.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:04.350Z,1513220524.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:04.383Z,1513220524.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:04.758Z,1513220524.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:04.859Z,1513220524.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:05.162Z,1513220525.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:05.193Z,1513220525.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:05.554Z,1513220525.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:05.569Z,1513220525.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:05.953Z,1513220525.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:05.968Z,1513220525.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:06.351Z,1513220526.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:06.366Z,1513220526.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:06.753Z,1513220526.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:06.863Z,1513220526.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:07.167Z,1513220527.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:07.203Z,1513220527.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:07.555Z,1513220527.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:07.650Z,1513220527.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:07.955Z,1513220527.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:07.984Z,1513220527.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:08.340Z,1513220528.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:08.356Z,1513220528.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:08.744Z,1513220528.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:08.854Z,1513220528.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:09.142Z,1513220529.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:09.167Z,1513220529.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:09.555Z,1513220529.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:09.570Z,1513220529.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:09.948Z,1513220529.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:09.970Z,1513220529.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:10.363Z,1513220530.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:10.403Z,1513220530.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:10.758Z,1513220530.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:10.776Z,1513220530.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:11.174Z,1513220531.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:11.190Z,1513220531.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:11.546Z,1513220531.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:11.580Z,1513220531.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:11.947Z,1513220531.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:11.975Z,1513220531.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:12.346Z,1513220532.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:12.392Z,1513220532.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:12.747Z,1513220532.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:12.764Z,1513220532.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:13.171Z,1513220533.171 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:02:13.171Z,1513220533.171 [NAL9602] Data Fault, FailCount= 4
2017-12-14T03:02:13.172Z,1513220533.172 [NAL9602](ERROR): Data Fault
2017-12-14T03:02:13.209Z,1513220533.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:13.257Z,1513220533.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:13.283Z,1513220533.283 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:02:13.522Z,1513220533.522 [NAL9602](INFO): Powering down
2017-12-14T03:02:13.570Z,1513220533.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:13.618Z,1513220533.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:13.938Z,1513220533.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:13.973Z,1513220533.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:14.343Z,1513220534.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:14.399Z,1513220534.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:14.437Z,1513220534.437 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:02:14.437Z,1513220534.437 [NAL9602] No Fault, FailCount= 4
2017-12-14T03:02:14.739Z,1513220534.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:14.778Z,1513220534.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:15.200Z,1513220535.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:15.239Z,1513220535.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:15.543Z,1513220535.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:15.590Z,1513220535.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:15.943Z,1513220535.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:15.967Z,1513220535.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:16.349Z,1513220536.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:16.393Z,1513220536.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:16.812Z,1513220536.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:16.887Z,1513220536.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:17.138Z,1513220537.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:17.174Z,1513220537.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:17.538Z,1513220537.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:17.575Z,1513220537.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:17.936Z,1513220537.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:17.963Z,1513220537.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:18.338Z,1513220538.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:18.366Z,1513220538.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:18.747Z,1513220538.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:18.824Z,1513220538.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:19.145Z,1513220539.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:19.171Z,1513220539.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:19.547Z,1513220539.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:19.563Z,1513220539.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:19.947Z,1513220539.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:19.961Z,1513220539.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:20.338Z,1513220540.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:20.363Z,1513220540.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:20.754Z,1513220540.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:20.850Z,1513220540.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:24.359Z,1513220544.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:24.374Z,1513220544.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:24.472Z,1513220544.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:24.538Z,1513220544.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:24.874Z,1513220544.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:24.928Z,1513220544.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:25.235Z,1513220545.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:25.267Z,1513220545.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:25.628Z,1513220545.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:25.647Z,1513220545.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:26.032Z,1513220546.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:26.046Z,1513220546.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:26.432Z,1513220546.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:26.456Z,1513220546.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:26.830Z,1513220546.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:26.846Z,1513220546.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:27.230Z,1513220547.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:27.251Z,1513220547.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:27.635Z,1513220547.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:27.649Z,1513220547.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:28.035Z,1513220548.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:28.050Z,1513220548.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:28.434Z,1513220548.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:28.448Z,1513220548.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:28.832Z,1513220548.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:28.846Z,1513220548.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:29.228Z,1513220549.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:29.244Z,1513220549.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:29.622Z,1513220549.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:29.637Z,1513220549.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:30.022Z,1513220550.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:30.055Z,1513220550.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:30.436Z,1513220550.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:30.455Z,1513220550.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:30.863Z,1513220550.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:30.893Z,1513220550.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:31.216Z,1513220551.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:31.251Z,1513220551.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:31.634Z,1513220551.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:31.654Z,1513220551.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:32.022Z,1513220552.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:32.047Z,1513220552.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:32.422Z,1513220552.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:32.455Z,1513220552.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:32.874Z,1513220552.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:32.919Z,1513220552.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:33.223Z,1513220553.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:33.259Z,1513220553.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:33.622Z,1513220553.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:33.661Z,1513220553.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:34.022Z,1513220554.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:34.053Z,1513220554.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:34.426Z,1513220554.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:34.457Z,1513220554.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:34.858Z,1513220554.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:34.873Z,1513220554.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:35.228Z,1513220555.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:35.251Z,1513220555.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:35.682Z,1513220555.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:35.713Z,1513220555.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:36.030Z,1513220556.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:36.046Z,1513220556.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:36.429Z,1513220556.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:36.490Z,1513220556.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:36.864Z,1513220556.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:36.908Z,1513220556.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:37.236Z,1513220557.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:37.251Z,1513220557.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:37.635Z,1513220557.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:37.687Z,1513220557.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:38.032Z,1513220558.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:38.054Z,1513220558.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:38.416Z,1513220558.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:38.475Z,1513220558.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:38.866Z,1513220558.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:38.929Z,1513220558.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:39.239Z,1513220559.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:39.278Z,1513220559.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:39.632Z,1513220559.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:39.651Z,1513220559.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:40.045Z,1513220560.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:40.076Z,1513220560.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:40.432Z,1513220560.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:40.446Z,1513220560.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:40.828Z,1513220560.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:40.843Z,1513220560.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:41.230Z,1513220561.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:41.244Z,1513220561.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:41.632Z,1513220561.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:41.646Z,1513220561.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:41.717Z,1513220561.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:42.028Z,1513220562.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:42.042Z,1513220562.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:42.456Z,1513220562.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:42.489Z,1513220562.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:42.515Z,1513220562.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:42.830Z,1513220562.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:42.845Z,1513220562.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:43.231Z,1513220563.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:43.245Z,1513220563.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:43.616Z,1513220563.616 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:02:43.634Z,1513220563.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:43.649Z,1513220563.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:44.033Z,1513220564.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:44.048Z,1513220564.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:44.428Z,1513220564.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:44.443Z,1513220564.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:44.858Z,1513220564.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:44.900Z,1513220564.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:45.231Z,1513220565.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:45.246Z,1513220565.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:45.639Z,1513220565.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:45.695Z,1513220565.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:45.696Z,1513220565.696 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2017-12-14T03:02:45.696Z,1513220565.696 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:02:45.697Z,1513220565.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:45.698Z,1513220565.698 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2017-12-14T03:02:45.698Z,1513220565.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:02:45.700Z,1513220565.700 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:45.700Z,1513220565.700 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2017-12-14T03:02:45.700Z,1513220565.700 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:02:45.764Z,1513220565.764 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:02:45.764Z,1513220565.764 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:02:45.764Z,1513220565.764 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:02:46.022Z,1513220566.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:46.070Z,1513220566.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:02:46.070Z,1513220566.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2017-12-14T03:02:46.070Z,1513220566.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:02:46.070Z,1513220566.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2017-12-14T03:02:46.071Z,1513220566.071 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:02:46.071Z,1513220566.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2017-12-14T03:02:46.481Z,1513220566.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:46.559Z,1513220566.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:02:46.560Z,1513220566.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:02:46.560Z,1513220566.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:02:46.561Z,1513220566.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:02:46.561Z,1513220566.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:02:46.561Z,1513220566.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:02:46.562Z,1513220566.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:02:46.562Z,1513220566.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:02:46.563Z,1513220566.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:02:46.843Z,1513220566.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:46.879Z,1513220566.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:47.223Z,1513220567.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:47.255Z,1513220567.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:47.622Z,1513220567.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:47.656Z,1513220567.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:48.022Z,1513220568.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:48.055Z,1513220568.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:48.427Z,1513220568.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:48.453Z,1513220568.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:48.875Z,1513220568.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:48.944Z,1513220568.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:49.222Z,1513220569.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:49.257Z,1513220569.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:49.627Z,1513220569.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:49.652Z,1513220569.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:50.022Z,1513220570.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:50.054Z,1513220570.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:50.420Z,1513220570.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:50.457Z,1513220570.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:50.864Z,1513220570.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:50.917Z,1513220570.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:51.226Z,1513220571.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:51.253Z,1513220571.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:51.622Z,1513220571.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:51.654Z,1513220571.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:52.044Z,1513220572.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:52.088Z,1513220572.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:52.427Z,1513220572.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:52.453Z,1513220572.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:52.852Z,1513220572.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:52.916Z,1513220572.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:53.227Z,1513220573.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:53.255Z,1513220573.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:53.634Z,1513220573.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:53.649Z,1513220573.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:54.037Z,1513220574.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:54.059Z,1513220574.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:54.447Z,1513220574.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:54.467Z,1513220574.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:54.809Z,1513220574.809 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:02:54.841Z,1513220574.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:54.856Z,1513220574.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:55.251Z,1513220575.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:55.334Z,1513220575.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:55.647Z,1513220575.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:55.667Z,1513220575.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:56.049Z,1513220576.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:56.071Z,1513220576.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:56.450Z,1513220576.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:56.472Z,1513220576.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:56.843Z,1513220576.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:56.859Z,1513220576.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:57.243Z,1513220577.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:57.259Z,1513220577.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:57.644Z,1513220577.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:57.659Z,1513220577.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:58.043Z,1513220578.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:58.103Z,1513220578.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:58.452Z,1513220578.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:58.519Z,1513220578.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:58.857Z,1513220578.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:58.879Z,1513220578.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:59.235Z,1513220579.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:59.264Z,1513220579.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:02:59.630Z,1513220579.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:02:59.671Z,1513220579.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:00.028Z,1513220580.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:00.066Z,1513220580.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:00.430Z,1513220580.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:00.482Z,1513220580.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:00.865Z,1513220580.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:00.899Z,1513220580.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:01.242Z,1513220581.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:01.273Z,1513220581.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:01.637Z,1513220581.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:01.680Z,1513220581.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:02.037Z,1513220582.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:02.060Z,1513220582.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:02.434Z,1513220582.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:02.450Z,1513220582.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:02.851Z,1513220582.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:02.898Z,1513220582.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:03.224Z,1513220583.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:03.249Z,1513220583.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:03.624Z,1513220583.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:03.671Z,1513220583.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:04.038Z,1513220584.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:04.058Z,1513220584.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:04.446Z,1513220584.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:04.461Z,1513220584.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:04.880Z,1513220584.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:04.959Z,1513220584.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:05.235Z,1513220585.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:05.263Z,1513220585.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:05.630Z,1513220585.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:05.644Z,1513220585.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:06.031Z,1513220586.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:06.045Z,1513220586.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:06.427Z,1513220586.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:06.442Z,1513220586.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:06.910Z,1513220586.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:06.945Z,1513220586.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:07.242Z,1513220587.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:07.275Z,1513220587.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:07.650Z,1513220587.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:07.664Z,1513220587.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:08.034Z,1513220588.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:08.095Z,1513220588.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:08.433Z,1513220588.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:08.465Z,1513220588.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:08.820Z,1513220588.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:08.879Z,1513220588.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:09.224Z,1513220589.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:09.239Z,1513220589.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:09.631Z,1513220589.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:09.645Z,1513220589.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:10.045Z,1513220590.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:10.075Z,1513220590.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:10.366Z,1513220590.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:10.445Z,1513220590.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:10.471Z,1513220590.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:10.841Z,1513220590.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:10.868Z,1513220590.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:11.163Z,1513220591.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:11.235Z,1513220591.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:11.268Z,1513220591.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:11.569Z,1513220591.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:11.630Z,1513220591.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:11.646Z,1513220591.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:12.032Z,1513220592.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:12.046Z,1513220592.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:12.432Z,1513220592.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:12.447Z,1513220592.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:12.865Z,1513220592.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:12.886Z,1513220592.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:13.246Z,1513220593.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:13.272Z,1513220593.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:13.641Z,1513220593.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:13.656Z,1513220593.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:14.038Z,1513220594.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:14.053Z,1513220594.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:14.433Z,1513220594.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:14.448Z,1513220594.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:14.891Z,1513220594.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:14.941Z,1513220594.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:15.229Z,1513220595.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:15.263Z,1513220595.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:15.635Z,1513220595.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:15.649Z,1513220595.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:16.046Z,1513220596.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:16.061Z,1513220596.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:16.444Z,1513220596.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:16.465Z,1513220596.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:16.864Z,1513220596.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:16.900Z,1513220596.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:17.223Z,1513220597.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:17.247Z,1513220597.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:17.627Z,1513220597.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:17.654Z,1513220597.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:18.028Z,1513220598.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:18.054Z,1513220598.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:18.447Z,1513220598.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:18.462Z,1513220598.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:18.867Z,1513220598.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:18.900Z,1513220598.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:19.242Z,1513220599.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:19.264Z,1513220599.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:19.640Z,1513220599.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:19.663Z,1513220599.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:20.042Z,1513220600.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:20.063Z,1513220600.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:20.431Z,1513220600.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:20.467Z,1513220600.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:20.891Z,1513220600.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:20.979Z,1513220600.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:24.250Z,1513220604.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:24.290Z,1513220604.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:24.353Z,1513220604.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:24.389Z,1513220604.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:24.458Z,1513220604.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:24.765Z,1513220604.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:24.792Z,1513220604.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:25.150Z,1513220605.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:25.220Z,1513220605.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:25.284Z,1513220605.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:25.562Z,1513220605.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:25.585Z,1513220605.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:25.597Z,1513220605.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:25.950Z,1513220605.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:25.995Z,1513220605.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:26.351Z,1513220606.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:26.366Z,1513220606.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:26.382Z,1513220606.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:26.749Z,1513220606.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:26.831Z,1513220606.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:27.166Z,1513220607.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:27.178Z,1513220607.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:27.183Z,1513220607.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:27.569Z,1513220607.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:27.594Z,1513220607.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:27.620Z,1513220607.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:27.951Z,1513220607.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:27.979Z,1513220607.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:28.340Z,1513220608.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:28.373Z,1513220608.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:28.740Z,1513220608.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:28.756Z,1513220608.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:29.149Z,1513220609.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:29.176Z,1513220609.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:29.551Z,1513220609.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:29.566Z,1513220609.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:29.956Z,1513220609.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:29.971Z,1513220609.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:30.359Z,1513220610.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:30.374Z,1513220610.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:30.805Z,1513220610.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:30.873Z,1513220610.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:31.139Z,1513220611.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:31.167Z,1513220611.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:31.540Z,1513220611.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:31.576Z,1513220611.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:31.944Z,1513220611.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:31.973Z,1513220611.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:32.340Z,1513220612.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:32.376Z,1513220612.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:32.743Z,1513220612.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:32.826Z,1513220612.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:33.153Z,1513220613.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:33.168Z,1513220613.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:33.554Z,1513220613.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:33.569Z,1513220613.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:33.962Z,1513220613.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:33.000Z,1513220614.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:34.348Z,1513220614.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:34.402Z,1513220614.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:34.751Z,1513220614.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:34.775Z,1513220614.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:35.139Z,1513220615.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:35.166Z,1513220615.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:35.539Z,1513220615.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:35.571Z,1513220615.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:35.960Z,1513220615.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:35.975Z,1513220615.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:36.366Z,1513220616.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:36.382Z,1513220616.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:36.764Z,1513220616.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:36.778Z,1513220616.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:37.219Z,1513220617.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:37.251Z,1513220617.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:37.548Z,1513220617.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:37.563Z,1513220617.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:37.949Z,1513220617.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:37.963Z,1513220617.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:38.351Z,1513220618.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:38.365Z,1513220618.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:38.749Z,1513220618.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:38.764Z,1513220618.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:39.212Z,1513220619.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:39.255Z,1513220619.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:39.558Z,1513220619.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:39.574Z,1513220619.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:39.988Z,1513220619.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:40.003Z,1513220620.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:40.349Z,1513220620.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:40.364Z,1513220620.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:40.749Z,1513220620.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:40.827Z,1513220620.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:41.144Z,1513220621.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:41.182Z,1513220621.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:41.553Z,1513220621.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:41.569Z,1513220621.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:41.962Z,1513220621.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:41.978Z,1513220621.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:42.361Z,1513220622.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:42.376Z,1513220622.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:42.781Z,1513220622.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:42.855Z,1513220622.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:43.157Z,1513220623.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:43.172Z,1513220623.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:43.579Z,1513220623.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:43.611Z,1513220623.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:43.939Z,1513220623.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:43.968Z,1513220623.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:44.340Z,1513220624.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:44.366Z,1513220624.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:44.739Z,1513220624.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:44.843Z,1513220624.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:45.168Z,1513220625.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:45.186Z,1513220625.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:45.566Z,1513220625.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:45.578Z,1513220625.578 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:03:45.578Z,1513220625.578 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:03:45.578Z,1513220625.578 [BPC1](ERROR): Data Fault
2017-12-14T03:03:45.598Z,1513220625.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:45.620Z,1513220625.620 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:03:46.017Z,1513220626.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:46.032Z,1513220626.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:46.353Z,1513220626.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:46.368Z,1513220626.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:46.821Z,1513220626.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:46.931Z,1513220626.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:46.979Z,1513220626.979 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:03:46.980Z,1513220626.980 [BPC1] No Fault, FailCount= 1
2017-12-14T03:03:47.139Z,1513220627.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:47.231Z,1513220627.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:47.543Z,1513220627.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:47.571Z,1513220627.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:47.964Z,1513220627.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:47.979Z,1513220627.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:48.363Z,1513220628.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:48.379Z,1513220628.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:48.759Z,1513220628.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:48.789Z,1513220628.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:49.148Z,1513220629.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:49.173Z,1513220629.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:49.548Z,1513220629.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:49.563Z,1513220629.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:49.951Z,1513220629.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:49.966Z,1513220629.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:50.350Z,1513220630.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:50.368Z,1513220630.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:50.748Z,1513220630.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:50.764Z,1513220630.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:51.199Z,1513220631.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:51.238Z,1513220631.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:51.561Z,1513220631.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:51.575Z,1513220631.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:51.962Z,1513220631.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:51.977Z,1513220631.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:52.354Z,1513220632.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:52.368Z,1513220632.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:52.754Z,1513220632.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:52.768Z,1513220632.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:53.206Z,1513220633.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:53.253Z,1513220633.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:53.555Z,1513220633.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:53.587Z,1513220633.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:53.958Z,1513220633.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:53.987Z,1513220633.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:54.364Z,1513220634.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:54.379Z,1513220634.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:54.759Z,1513220634.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:54.854Z,1513220634.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:55.148Z,1513220635.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:55.163Z,1513220635.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:55.548Z,1513220635.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:55.598Z,1513220635.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:55.949Z,1513220635.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:55.964Z,1513220635.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:56.353Z,1513220636.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:56.368Z,1513220636.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:56.748Z,1513220636.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:56.812Z,1513220636.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:57.162Z,1513220637.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:57.177Z,1513220637.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:57.560Z,1513220637.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:57.576Z,1513220637.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:57.952Z,1513220637.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:57.976Z,1513220637.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:58.339Z,1513220638.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:58.372Z,1513220638.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:58.757Z,1513220638.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:58.865Z,1513220638.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:59.144Z,1513220639.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:59.172Z,1513220639.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:59.562Z,1513220639.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:59.619Z,1513220639.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:03:59.958Z,1513220639.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:03:59.981Z,1513220639.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:00.368Z,1513220640.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:00.383Z,1513220640.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:00.758Z,1513220640.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:00.844Z,1513220640.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:01.154Z,1513220641.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:01.169Z,1513220641.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:01.557Z,1513220641.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:01.579Z,1513220641.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:01.949Z,1513220641.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:01.964Z,1513220641.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:02.354Z,1513220642.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:02.369Z,1513220642.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:02.775Z,1513220642.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:02.799Z,1513220642.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:03.154Z,1513220643.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:03.182Z,1513220643.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:03.572Z,1513220643.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:03.591Z,1513220643.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:03.952Z,1513220643.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:03.978Z,1513220643.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:04.343Z,1513220644.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:04.360Z,1513220644.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:04.743Z,1513220644.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:04.759Z,1513220644.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:05.190Z,1513220645.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:05.229Z,1513220645.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:05.543Z,1513220645.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:05.575Z,1513220645.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:05.965Z,1513220645.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:05.980Z,1513220645.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:06.374Z,1513220646.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:06.390Z,1513220646.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:06.765Z,1513220646.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:06.780Z,1513220646.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:07.198Z,1513220647.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:07.263Z,1513220647.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:07.548Z,1513220647.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:07.606Z,1513220647.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:07.982Z,1513220647.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:07.997Z,1513220647.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:08.352Z,1513220648.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:08.399Z,1513220648.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:08.748Z,1513220648.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:08.829Z,1513220648.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:09.215Z,1513220649.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:09.275Z,1513220649.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:09.555Z,1513220649.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:09.580Z,1513220649.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:09.950Z,1513220649.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:09.981Z,1513220649.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:10.349Z,1513220650.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:10.363Z,1513220650.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:10.747Z,1513220650.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:10.832Z,1513220650.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:11.148Z,1513220651.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:11.163Z,1513220651.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:11.549Z,1513220651.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:11.564Z,1513220651.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:11.952Z,1513220651.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:11.975Z,1513220651.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:12.359Z,1513220652.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:12.410Z,1513220652.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:12.777Z,1513220652.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:12.856Z,1513220652.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:13.154Z,1513220653.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:13.180Z,1513220653.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:13.539Z,1513220653.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:13.575Z,1513220653.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:13.976Z,1513220653.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:13.995Z,1513220653.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:14.338Z,1513220654.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:14.363Z,1513220654.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:14.740Z,1513220654.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:14.755Z,1513220654.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:15.158Z,1513220655.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:15.175Z,1513220655.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:15.593Z,1513220655.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:15.629Z,1513220655.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:15.950Z,1513220655.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:15.977Z,1513220655.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:16.339Z,1513220656.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:16.354Z,1513220656.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:16.743Z,1513220656.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:16.783Z,1513220656.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:17.146Z,1513220657.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:17.167Z,1513220657.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:17.550Z,1513220657.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:17.588Z,1513220657.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:17.959Z,1513220657.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:17.974Z,1513220657.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:18.365Z,1513220658.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:18.382Z,1513220658.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:18.805Z,1513220658.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:18.838Z,1513220658.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:19.185Z,1513220659.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:19.220Z,1513220659.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:19.544Z,1513220659.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:19.561Z,1513220659.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:19.981Z,1513220659.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:19.995Z,1513220659.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:19.999Z,1513220659.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T02:59:19.9Z
2017-12-14T03:04:19.999Z,1513220659.999 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:04:19.999Z,1513220659.999 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:04:20.344Z,1513220660.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:20.367Z,1513220660.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:21.168Z,1513220661.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:21.187Z,1513220661.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:21.311Z,1513220661.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:21.347Z,1513220661.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:24.689Z,1513220664.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:24.704Z,1513220664.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:24.839Z,1513220664.839 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0060.lzma
2017-12-14T03:04:24.883Z,1513220664.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:24.916Z,1513220664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:25.171Z,1513220665.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:25.215Z,1513220665.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:25.531Z,1513220665.531 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0060.lzma.bak
2017-12-14T03:04:25.531Z,1513220665.531 [DataOverHttps](INFO): SBD MOMSN=5437450
2017-12-14T03:04:25.556Z,1513220665.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:25.593Z,1513220665.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:26.812Z,1513220666.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:26.855Z,1513220666.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:26.954Z,1513220666.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:26.979Z,1513220666.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:30.422Z,1513220670.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:30.516Z,1513220670.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:30.630Z,1513220670.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:30.661Z,1513220670.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:30.999Z,1513220670.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:31.019Z,1513220671.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:31.402Z,1513220671.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:31.500Z,1513220671.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:31.780Z,1513220671.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:31.816Z,1513220671.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:32.181Z,1513220672.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:32.219Z,1513220672.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:35.662Z,1513220675.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:35.676Z,1513220675.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:35.764Z,1513220675.764 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0061.lzma
2017-12-14T03:04:35.806Z,1513220675.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:35.836Z,1513220675.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:36.158Z,1513220676.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:36.172Z,1513220676.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:36.515Z,1513220676.515 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0061.lzma.bak
2017-12-14T03:04:36.515Z,1513220676.515 [DataOverHttps](INFO): SBD MOMSN=5437452
2017-12-14T03:04:36.559Z,1513220676.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:36.591Z,1513220676.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:37.669Z,1513220677.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:37.683Z,1513220677.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:37.687Z,1513220677.687 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:04:37.687Z,1513220677.687 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:04:37.687Z,1513220677.687 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:04:37.791Z,1513220677.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:37.820Z,1513220677.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:41.231Z,1513220681.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:41.291Z,1513220681.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:41.408Z,1513220681.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:41.432Z,1513220681.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:41.782Z,1513220681.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:41.796Z,1513220681.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:42.181Z,1513220682.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:42.195Z,1513220682.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:42.583Z,1513220682.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:42.623Z,1513220682.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:42.983Z,1513220682.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:42.999Z,1513220682.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:43.375Z,1513220683.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:43.400Z,1513220683.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:43.779Z,1513220683.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:43.794Z,1513220683.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:44.217Z,1513220684.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:44.282Z,1513220684.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:44.586Z,1513220684.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:44.600Z,1513220684.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:44.980Z,1513220684.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:45.003Z,1513220685.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:45.374Z,1513220685.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:45.388Z,1513220685.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:45.777Z,1513220685.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:45.791Z,1513220685.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:46.177Z,1513220686.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:46.192Z,1513220686.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:46.580Z,1513220686.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:46.594Z,1513220686.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:46.982Z,1513220686.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:46.996Z,1513220686.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:47.423Z,1513220687.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:47.447Z,1513220687.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:47.784Z,1513220687.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:47.804Z,1513220687.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:48.177Z,1513220688.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:48.191Z,1513220688.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:48.580Z,1513220688.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:48.595Z,1513220688.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:48.998Z,1513220688.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:49.030Z,1513220689.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:49.374Z,1513220689.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:49.403Z,1513220689.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:49.779Z,1513220689.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:49.803Z,1513220689.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:50.184Z,1513220690.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:50.199Z,1513220690.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:50.589Z,1513220690.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:50.612Z,1513220690.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:50.986Z,1513220690.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:51.001Z,1513220691.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:51.383Z,1513220691.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:51.403Z,1513220691.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:51.782Z,1513220691.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:51.797Z,1513220691.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:52.175Z,1513220692.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:52.192Z,1513220692.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:52.570Z,1513220692.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:52.598Z,1513220692.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:52.997Z,1513220692.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:53.012Z,1513220693.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:53.385Z,1513220693.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:53.474Z,1513220693.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:53.828Z,1513220693.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:53.855Z,1513220693.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:54.167Z,1513220694.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:54.223Z,1513220694.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:54.567Z,1513220694.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:54.602Z,1513220694.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:54.967Z,1513220694.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:55.015Z,1513220695.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:55.369Z,1513220695.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:55.404Z,1513220695.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:55.772Z,1513220695.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:55.803Z,1513220695.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:56.177Z,1513220696.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:56.215Z,1513220696.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:56.581Z,1513220696.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:56.612Z,1513220696.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:57.020Z,1513220697.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:57.036Z,1513220697.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:57.373Z,1513220697.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:57.388Z,1513220697.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:57.775Z,1513220697.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:57.789Z,1513220697.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:58.170Z,1513220698.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:58.185Z,1513220698.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:58.572Z,1513220698.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:58.588Z,1513220698.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:58.985Z,1513220698.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:59.015Z,1513220699.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:59.385Z,1513220699.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:59.411Z,1513220699.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:04:59.809Z,1513220699.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:04:59.824Z,1513220699.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:00.225Z,1513220700.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:00.303Z,1513220700.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:00.576Z,1513220700.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:00.638Z,1513220700.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:00.975Z,1513220700.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:01.011Z,1513220701.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:01.379Z,1513220701.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:01.394Z,1513220701.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:01.773Z,1513220701.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:01.788Z,1513220701.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:02.185Z,1513220702.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:02.216Z,1513220702.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:02.585Z,1513220702.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:02.599Z,1513220702.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:02.987Z,1513220702.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:03.020Z,1513220703.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:03.412Z,1513220703.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:03.475Z,1513220703.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:03.779Z,1513220703.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:03.794Z,1513220703.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:04.184Z,1513220704.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:04.199Z,1513220704.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:04.580Z,1513220704.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:04.595Z,1513220704.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:04.982Z,1513220704.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:05.030Z,1513220705.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:05.387Z,1513220705.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:05.403Z,1513220705.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:05.782Z,1513220705.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:05.799Z,1513220705.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:06.176Z,1513220706.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:06.191Z,1513220706.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:06.608Z,1513220706.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:06.643Z,1513220706.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:06.973Z,1513220706.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:06.996Z,1513220706.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:07.378Z,1513220707.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:07.393Z,1513220707.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:07.771Z,1513220707.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:07.799Z,1513220707.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:08.186Z,1513220708.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:08.202Z,1513220708.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:08.658Z,1513220708.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:08.686Z,1513220708.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:08.987Z,1513220708.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:09.014Z,1513220709.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:09.371Z,1513220709.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:09.398Z,1513220709.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:09.769Z,1513220709.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:09.800Z,1513220709.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:10.168Z,1513220710.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:10.203Z,1513220710.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:10.567Z,1513220710.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:10.603Z,1513220710.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:11.001Z,1513220711.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:11.017Z,1513220711.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:11.400Z,1513220711.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:11.415Z,1513220711.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:11.786Z,1513220711.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:11.815Z,1513220711.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:12.203Z,1513220712.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:12.223Z,1513220712.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:12.568Z,1513220712.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:12.585Z,1513220712.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:13.016Z,1513220713.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:13.076Z,1513220713.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:13.378Z,1513220713.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:13.394Z,1513220713.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:13.777Z,1513220713.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:13.796Z,1513220713.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:14.182Z,1513220714.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:14.197Z,1513220714.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:14.589Z,1513220714.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:14.604Z,1513220714.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:14.983Z,1513220714.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:14.998Z,1513220714.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:15.370Z,1513220715.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:15.427Z,1513220715.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:15.767Z,1513220715.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:15.812Z,1513220715.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:16.168Z,1513220716.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:16.236Z,1513220716.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:16.596Z,1513220716.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:16.652Z,1513220716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:16.995Z,1513220716.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:17.009Z,1513220717.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:17.390Z,1513220717.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:17.439Z,1513220717.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:17.786Z,1513220717.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:17.819Z,1513220717.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:18.175Z,1513220718.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:18.189Z,1513220718.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:18.575Z,1513220718.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:18.611Z,1513220718.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:18.983Z,1513220718.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:19.017Z,1513220719.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:19.432Z,1513220719.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:19.465Z,1513220719.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:19.772Z,1513220719.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:19.792Z,1513220719.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:20.204Z,1513220720.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:20.220Z,1513220720.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:20.585Z,1513220720.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:20.611Z,1513220720.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:20.990Z,1513220720.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:21.028Z,1513220721.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:21.372Z,1513220721.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:21.391Z,1513220721.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:21.779Z,1513220721.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:21.793Z,1513220721.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:22.174Z,1513220722.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:22.201Z,1513220722.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:22.582Z,1513220722.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:22.605Z,1513220722.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:22.991Z,1513220722.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:23.103Z,1513220723.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:23.394Z,1513220723.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:23.415Z,1513220723.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:23.791Z,1513220723.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:23.811Z,1513220723.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:24.171Z,1513220724.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:24.199Z,1513220724.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:24.564Z,1513220724.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:24.594Z,1513220724.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:24.987Z,1513220724.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:25.003Z,1513220725.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:25.367Z,1513220725.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:25.394Z,1513220725.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:25.768Z,1513220725.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:25.835Z,1513220725.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:26.181Z,1513220726.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:26.208Z,1513220726.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:26.586Z,1513220726.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:26.609Z,1513220726.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:27.001Z,1513220727.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:27.015Z,1513220727.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:27.383Z,1513220727.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:27.411Z,1513220727.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:27.772Z,1513220727.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:27.787Z,1513220727.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:28.176Z,1513220728.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:28.213Z,1513220728.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:28.573Z,1513220728.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:28.588Z,1513220728.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:29.009Z,1513220729.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:29.027Z,1513220729.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:29.391Z,1513220729.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:29.431Z,1513220729.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:29.785Z,1513220729.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:29.818Z,1513220729.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:30.179Z,1513220730.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:30.193Z,1513220730.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:30.575Z,1513220730.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:30.595Z,1513220730.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:30.977Z,1513220730.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:30.992Z,1513220730.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:31.376Z,1513220731.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:31.392Z,1513220731.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:31.772Z,1513220731.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:31.787Z,1513220731.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:32.181Z,1513220732.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:32.196Z,1513220732.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:32.583Z,1513220732.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:32.647Z,1513220732.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:32.994Z,1513220732.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:33.019Z,1513220733.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:33.375Z,1513220733.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:33.390Z,1513220733.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:33.775Z,1513220733.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:33.796Z,1513220733.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:34.178Z,1513220734.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:34.193Z,1513220734.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:34.574Z,1513220734.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:34.593Z,1513220734.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:34.981Z,1513220734.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:35.019Z,1513220735.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:35.393Z,1513220735.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:35.418Z,1513220735.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:35.800Z,1513220735.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:35.833Z,1513220735.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:36.186Z,1513220736.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:36.201Z,1513220736.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:36.576Z,1513220736.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:36.591Z,1513220736.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:36.987Z,1513220736.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:37.007Z,1513220737.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:37.379Z,1513220737.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:37.394Z,1513220737.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:37.783Z,1513220737.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:37.842Z,1513220737.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:38.191Z,1513220738.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:38.206Z,1513220738.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:41.756Z,1513220741.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:41.812Z,1513220741.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:41.938Z,1513220741.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:41.982Z,1513220741.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:42.297Z,1513220742.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:42.351Z,1513220742.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:42.699Z,1513220742.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:42.713Z,1513220742.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:43.099Z,1513220743.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:43.215Z,1513220743.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:43.500Z,1513220743.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:43.519Z,1513220743.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:43.901Z,1513220743.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:43.917Z,1513220743.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:44.302Z,1513220744.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:44.316Z,1513220744.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:44.702Z,1513220744.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:44.723Z,1513220744.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:45.116Z,1513220745.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:45.196Z,1513220745.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:45.508Z,1513220745.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:45.527Z,1513220745.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:45.908Z,1513220745.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:45.927Z,1513220745.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:46.310Z,1513220746.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:46.325Z,1513220746.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:46.705Z,1513220746.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:46.723Z,1513220746.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:46.723Z,1513220746.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2017-12-14T03:05:46.723Z,1513220746.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:05:46.726Z,1513220746.726 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:46.726Z,1513220746.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2017-12-14T03:05:46.726Z,1513220746.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:05:46.728Z,1513220746.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:46.728Z,1513220746.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2017-12-14T03:05:46.728Z,1513220746.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:05:46.782Z,1513220746.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:05:46.783Z,1513220746.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:05:46.783Z,1513220746.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:05:47.099Z,1513220747.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:47.129Z,1513220747.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:05:47.129Z,1513220747.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2017-12-14T03:05:47.129Z,1513220747.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:05:47.129Z,1513220747.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2017-12-14T03:05:47.130Z,1513220747.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:05:47.130Z,1513220747.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2017-12-14T03:05:47.487Z,1513220747.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:47.526Z,1513220747.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:05:47.527Z,1513220747.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:05:47.527Z,1513220747.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:05:47.528Z,1513220747.528 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:05:47.528Z,1513220747.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:05:47.528Z,1513220747.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:05:47.529Z,1513220747.529 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:05:47.529Z,1513220747.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:05:47.529Z,1513220747.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:05:47.901Z,1513220747.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:47.934Z,1513220747.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:48.313Z,1513220748.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:48.328Z,1513220748.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:48.713Z,1513220748.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:48.728Z,1513220748.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:49.099Z,1513220749.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:49.122Z,1513220749.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:49.492Z,1513220749.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:49.515Z,1513220749.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:49.907Z,1513220749.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:49.934Z,1513220749.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:50.297Z,1513220750.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:50.319Z,1513220750.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:50.702Z,1513220750.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:50.718Z,1513220750.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:51.087Z,1513220751.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:51.157Z,1513220751.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:51.518Z,1513220751.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:51.579Z,1513220751.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:51.913Z,1513220751.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:51.935Z,1513220751.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:52.315Z,1513220752.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:52.331Z,1513220752.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:52.710Z,1513220752.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:52.726Z,1513220752.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:53.094Z,1513220753.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:53.122Z,1513220753.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:53.495Z,1513220753.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:53.510Z,1513220753.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:53.905Z,1513220753.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:53.936Z,1513220753.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:54.309Z,1513220754.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:54.340Z,1513220754.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:54.730Z,1513220754.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:54.761Z,1513220754.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:55.092Z,1513220755.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:55.119Z,1513220755.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:55.487Z,1513220755.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:55.512Z,1513220755.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:55.910Z,1513220755.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:55.925Z,1513220755.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:56.299Z,1513220756.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:56.330Z,1513220756.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:56.710Z,1513220756.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:56.725Z,1513220756.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:57.088Z,1513220757.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:57.190Z,1513220757.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:57.487Z,1513220757.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:57.523Z,1513220757.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:57.906Z,1513220757.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:57.922Z,1513220757.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:58.309Z,1513220758.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:58.324Z,1513220758.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:58.711Z,1513220758.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:58.726Z,1513220758.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:59.092Z,1513220759.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:59.194Z,1513220759.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:59.492Z,1513220759.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:59.506Z,1513220759.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:05:59.907Z,1513220759.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:05:59.931Z,1513220759.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:00.309Z,1513220760.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:00.339Z,1513220760.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:00.705Z,1513220760.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:00.732Z,1513220760.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:01.137Z,1513220761.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:01.182Z,1513220761.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:01.509Z,1513220761.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:01.531Z,1513220761.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:01.912Z,1513220761.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:01.931Z,1513220761.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:02.315Z,1513220762.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:02.330Z,1513220762.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:02.706Z,1513220762.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:02.722Z,1513220762.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:03.100Z,1513220763.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:03.134Z,1513220763.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:03.491Z,1513220763.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:03.550Z,1513220763.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:03.905Z,1513220763.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:03.974Z,1513220763.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:04.308Z,1513220764.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:04.347Z,1513220764.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:04.698Z,1513220764.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:04.833Z,1513220764.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:05.094Z,1513220765.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:05.109Z,1513220765.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:05.487Z,1513220765.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:05.528Z,1513220765.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:05.902Z,1513220765.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:05.916Z,1513220765.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:06.302Z,1513220766.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:06.339Z,1513220766.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:06.710Z,1513220766.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:06.747Z,1513220766.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:07.100Z,1513220767.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:07.115Z,1513220767.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:07.546Z,1513220767.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:07.581Z,1513220767.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:07.914Z,1513220767.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:07.928Z,1513220767.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:08.306Z,1513220768.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:08.321Z,1513220768.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:08.706Z,1513220768.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:08.720Z,1513220768.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:09.087Z,1513220769.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:09.123Z,1513220769.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:09.487Z,1513220769.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:09.518Z,1513220769.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:09.903Z,1513220769.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:09.922Z,1513220769.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:10.311Z,1513220770.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:10.325Z,1513220770.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:10.711Z,1513220770.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:10.772Z,1513220770.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:11.088Z,1513220771.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:11.172Z,1513220771.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:11.499Z,1513220771.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:11.537Z,1513220771.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:11.894Z,1513220771.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:11.908Z,1513220771.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:12.305Z,1513220772.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:12.332Z,1513220772.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:12.708Z,1513220772.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:12.732Z,1513220772.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:13.104Z,1513220773.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:13.184Z,1513220773.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:13.497Z,1513220773.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:13.512Z,1513220773.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:13.906Z,1513220773.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:13.993Z,1513220773.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:14.304Z,1513220774.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:14.320Z,1513220774.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:14.705Z,1513220774.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:14.720Z,1513220774.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:15.088Z,1513220775.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:15.102Z,1513220775.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:15.492Z,1513220775.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:15.506Z,1513220775.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:15.906Z,1513220775.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:15.939Z,1513220775.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:16.306Z,1513220776.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:16.339Z,1513220776.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:16.705Z,1513220776.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:16.740Z,1513220776.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:17.101Z,1513220777.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:17.147Z,1513220777.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:17.497Z,1513220777.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:17.519Z,1513220777.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:17.902Z,1513220777.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:17.917Z,1513220777.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:18.305Z,1513220778.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:18.320Z,1513220778.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:18.702Z,1513220778.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:18.723Z,1513220778.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:19.088Z,1513220779.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:19.120Z,1513220779.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:19.488Z,1513220779.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:19.536Z,1513220779.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:19.903Z,1513220779.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:19.931Z,1513220779.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:20.338Z,1513220780.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:20.389Z,1513220780.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:20.708Z,1513220780.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:20.815Z,1513220780.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:21.100Z,1513220781.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:21.153Z,1513220781.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:21.505Z,1513220781.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:21.554Z,1513220781.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:21.908Z,1513220781.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:21.936Z,1513220781.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:22.313Z,1513220782.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:22.328Z,1513220782.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:22.700Z,1513220782.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:22.756Z,1513220782.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:23.114Z,1513220783.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:23.144Z,1513220783.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:23.514Z,1513220783.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:23.560Z,1513220783.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:23.912Z,1513220783.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:23.960Z,1513220783.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:24.344Z,1513220784.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:24.374Z,1513220784.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:24.704Z,1513220784.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:24.735Z,1513220784.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:25.090Z,1513220785.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:25.209Z,1513220785.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:25.500Z,1513220785.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:25.612Z,1513220785.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:25.904Z,1513220785.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:25.938Z,1513220785.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:26.304Z,1513220786.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:26.339Z,1513220786.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:26.732Z,1513220786.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:26.842Z,1513220786.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:27.215Z,1513220787.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:27.300Z,1513220787.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:27.491Z,1513220787.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:27.539Z,1513220787.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:27.918Z,1513220787.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:27.940Z,1513220787.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:28.292Z,1513220788.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:28.308Z,1513220788.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:28.703Z,1513220788.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:28.732Z,1513220788.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:29.120Z,1513220789.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:29.136Z,1513220789.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:29.521Z,1513220789.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:29.536Z,1513220789.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:29.901Z,1513220789.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:29.929Z,1513220789.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:30.320Z,1513220790.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:30.335Z,1513220790.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:30.695Z,1513220790.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:30.726Z,1513220790.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:31.130Z,1513220791.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:31.174Z,1513220791.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:31.488Z,1513220791.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:31.524Z,1513220791.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:31.928Z,1513220791.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:31.958Z,1513220791.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:32.307Z,1513220792.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:32.335Z,1513220792.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:32.707Z,1513220792.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:32.747Z,1513220792.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:33.101Z,1513220793.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:33.152Z,1513220793.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:33.496Z,1513220793.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:33.523Z,1513220793.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:33.907Z,1513220793.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:33.934Z,1513220793.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:34.311Z,1513220794.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:34.336Z,1513220794.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:34.709Z,1513220794.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:34.732Z,1513220794.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:35.109Z,1513220795.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:35.151Z,1513220795.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:35.498Z,1513220795.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:35.543Z,1513220795.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:35.907Z,1513220795.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:35.995Z,1513220795.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:36.310Z,1513220796.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:36.357Z,1513220796.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:36.708Z,1513220796.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:36.758Z,1513220796.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:37.100Z,1513220797.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:37.143Z,1513220797.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:37.506Z,1513220797.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:37.548Z,1513220797.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:37.949Z,1513220797.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:38.016Z,1513220798.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:38.308Z,1513220798.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:38.328Z,1513220798.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:43.575Z,1513220803.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:43.607Z,1513220803.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:43.724Z,1513220803.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:43.765Z,1513220803.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:44.108Z,1513220804.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:44.136Z,1513220804.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:44.520Z,1513220804.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:44.534Z,1513220804.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:44.923Z,1513220804.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:44.938Z,1513220804.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:45.313Z,1513220805.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:45.355Z,1513220805.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:45.732Z,1513220805.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:45.747Z,1513220805.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:46.098Z,1513220806.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:46.128Z,1513220806.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:46.497Z,1513220806.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:46.527Z,1513220806.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:46.929Z,1513220806.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:46.967Z,1513220806.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:47.297Z,1513220807.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:47.339Z,1513220807.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:47.715Z,1513220807.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:47.794Z,1513220807.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:48.118Z,1513220808.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:48.138Z,1513220808.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:48.505Z,1513220808.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:48.540Z,1513220808.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:48.908Z,1513220808.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:48.975Z,1513220808.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:49.298Z,1513220809.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:49.332Z,1513220809.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:49.698Z,1513220809.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:49.747Z,1513220809.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:50.137Z,1513220810.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:50.172Z,1513220810.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:50.500Z,1513220810.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:50.522Z,1513220810.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:50.938Z,1513220810.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:50.959Z,1513220810.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:51.334Z,1513220811.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:51.350Z,1513220811.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:51.715Z,1513220811.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:51.744Z,1513220811.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:52.102Z,1513220812.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:52.124Z,1513220812.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:52.503Z,1513220812.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:52.526Z,1513220812.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:52.914Z,1513220812.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:52.932Z,1513220812.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:53.306Z,1513220813.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:53.351Z,1513220813.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:53.695Z,1513220813.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:53.734Z,1513220813.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:54.122Z,1513220814.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:54.142Z,1513220814.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:54.509Z,1513220814.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:54.543Z,1513220814.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:54.930Z,1513220814.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:54.948Z,1513220814.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:55.300Z,1513220815.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:55.330Z,1513220815.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:55.706Z,1513220815.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:55.756Z,1513220815.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:56.110Z,1513220816.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:56.140Z,1513220816.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:56.555Z,1513220816.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:56.602Z,1513220816.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:56.916Z,1513220816.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:56.947Z,1513220816.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:57.331Z,1513220817.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:57.346Z,1513220817.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:57.717Z,1513220817.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:57.768Z,1513220817.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:58.100Z,1513220818.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:58.139Z,1513220818.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:58.503Z,1513220818.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:58.541Z,1513220818.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:58.903Z,1513220818.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:58.918Z,1513220818.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:59.302Z,1513220819.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:59.347Z,1513220819.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:06:59.718Z,1513220819.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:06:59.764Z,1513220819.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:00.122Z,1513220820.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:00.146Z,1513220820.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:00.514Z,1513220820.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:00.539Z,1513220820.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:00.930Z,1513220820.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:00.944Z,1513220820.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:01.295Z,1513220821.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:01.332Z,1513220821.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:01.695Z,1513220821.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:01.739Z,1513220821.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:02.098Z,1513220822.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:02.127Z,1513220822.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:02.499Z,1513220822.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:02.524Z,1513220822.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:02.935Z,1513220822.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:02.966Z,1513220822.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:03.322Z,1513220823.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:03.344Z,1513220823.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:03.724Z,1513220823.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:03.791Z,1513220823.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:04.096Z,1513220824.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:04.130Z,1513220824.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:04.495Z,1513220824.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:04.539Z,1513220824.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:04.897Z,1513220824.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:04.954Z,1513220824.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:05.306Z,1513220825.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:05.339Z,1513220825.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:05.700Z,1513220825.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:05.736Z,1513220825.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:06.144Z,1513220826.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:06.179Z,1513220826.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:06.533Z,1513220826.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:06.548Z,1513220826.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:06.917Z,1513220826.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:06.948Z,1513220826.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:07.313Z,1513220827.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:07.344Z,1513220827.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:07.703Z,1513220827.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:07.747Z,1513220827.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:08.111Z,1513220828.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:08.128Z,1513220828.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:08.510Z,1513220828.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:08.525Z,1513220828.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:08.911Z,1513220828.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:08.934Z,1513220828.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:09.371Z,1513220829.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:09.491Z,1513220829.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:09.726Z,1513220829.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:09.740Z,1513220829.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:10.110Z,1513220830.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:10.131Z,1513220830.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:10.522Z,1513220830.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:10.578Z,1513220830.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:10.896Z,1513220830.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:10.929Z,1513220830.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:11.296Z,1513220831.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:11.361Z,1513220831.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:11.699Z,1513220831.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:11.736Z,1513220831.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:12.122Z,1513220832.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:12.136Z,1513220832.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:12.515Z,1513220832.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:12.538Z,1513220832.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:12.909Z,1513220832.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:12.938Z,1513220832.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:13.302Z,1513220833.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:13.329Z,1513220833.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:13.699Z,1513220833.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:13.739Z,1513220833.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:14.104Z,1513220834.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:14.143Z,1513220834.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:14.505Z,1513220834.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:14.545Z,1513220834.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:14.914Z,1513220834.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:14.943Z,1513220834.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:15.324Z,1513220835.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:15.339Z,1513220835.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:15.747Z,1513220835.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:15.795Z,1513220835.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:16.102Z,1513220836.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:16.140Z,1513220836.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:16.504Z,1513220836.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:16.543Z,1513220836.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:16.907Z,1513220836.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:16.922Z,1513220836.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:17.304Z,1513220837.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:17.337Z,1513220837.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:17.705Z,1513220837.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:17.737Z,1513220837.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:18.118Z,1513220838.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:18.148Z,1513220838.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:18.510Z,1513220838.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:18.532Z,1513220838.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:18.940Z,1513220838.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:18.968Z,1513220838.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:19.320Z,1513220839.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:19.335Z,1513220839.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:19.703Z,1513220839.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:19.762Z,1513220839.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:20.115Z,1513220840.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:20.130Z,1513220840.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:20.510Z,1513220840.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:20.532Z,1513220840.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:20.924Z,1513220840.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:20.939Z,1513220840.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:21.322Z,1513220841.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:21.351Z,1513220841.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:21.721Z,1513220841.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:21.739Z,1513220841.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:22.089Z,1513220842.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:22.159Z,1513220842.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:22.495Z,1513220842.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:22.535Z,1513220842.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:22.904Z,1513220842.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:22.932Z,1513220842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:23.303Z,1513220843.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:23.330Z,1513220843.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:23.695Z,1513220843.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:23.735Z,1513220843.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:24.122Z,1513220844.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:24.137Z,1513220844.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:24.517Z,1513220844.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:24.539Z,1513220844.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:24.907Z,1513220844.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:24.932Z,1513220844.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:25.320Z,1513220845.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:25.366Z,1513220845.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:25.704Z,1513220845.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:25.725Z,1513220845.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:26.110Z,1513220846.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:26.124Z,1513220846.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:26.510Z,1513220846.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:26.526Z,1513220846.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:26.906Z,1513220846.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:26.947Z,1513220846.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:27.314Z,1513220847.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:27.320Z,1513220847.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T03:07:27.358Z,1513220847.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:27.717Z,1513220847.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:27.749Z,1513220847.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:28.110Z,1513220848.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:28.126Z,1513220848.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:28.529Z,1513220848.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:28.596Z,1513220848.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:28.909Z,1513220848.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:28.926Z,1513220848.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:29.308Z,1513220849.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:29.323Z,1513220849.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:29.707Z,1513220849.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:29.743Z,1513220849.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:30.123Z,1513220850.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:30.152Z,1513220850.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:30.523Z,1513220850.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:30.552Z,1513220850.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:30.910Z,1513220850.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:30.931Z,1513220850.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:31.304Z,1513220851.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:31.332Z,1513220851.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:31.730Z,1513220851.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:31.812Z,1513220851.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:32.101Z,1513220852.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:32.134Z,1513220852.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:32.499Z,1513220852.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:32.534Z,1513220852.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:32.924Z,1513220852.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:32.975Z,1513220852.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:33.317Z,1513220853.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:33.342Z,1513220853.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:33.727Z,1513220853.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:33.768Z,1513220853.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:34.115Z,1513220854.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:34.130Z,1513220854.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:34.498Z,1513220854.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:34.525Z,1513220854.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:34.899Z,1513220854.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:34.941Z,1513220854.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:35.312Z,1513220855.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:35.343Z,1513220855.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:35.705Z,1513220855.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:35.741Z,1513220855.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:36.113Z,1513220856.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:36.149Z,1513220856.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:36.509Z,1513220856.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:36.544Z,1513220856.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:36.919Z,1513220856.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:36.945Z,1513220856.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:37.309Z,1513220857.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:37.345Z,1513220857.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:37.705Z,1513220857.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:37.720Z,1513220857.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:38.147Z,1513220858.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:38.175Z,1513220858.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:38.505Z,1513220858.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:38.524Z,1513220858.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:41.927Z,1513220861.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:41.990Z,1513220861.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:42.105Z,1513220862.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:42.121Z,1513220862.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:42.458Z,1513220862.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:42.499Z,1513220862.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:42.862Z,1513220862.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:42.900Z,1513220862.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:43.239Z,1513220863.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:43.267Z,1513220863.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:43.649Z,1513220863.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:43.671Z,1513220863.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:44.054Z,1513220864.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:44.069Z,1513220864.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:44.458Z,1513220864.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:44.479Z,1513220864.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:44.868Z,1513220864.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:44.884Z,1513220864.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:45.235Z,1513220865.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:45.272Z,1513220865.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:45.635Z,1513220865.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:45.667Z,1513220865.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:46.035Z,1513220866.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:46.066Z,1513220866.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:46.440Z,1513220866.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:46.517Z,1513220866.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:46.907Z,1513220866.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:46.935Z,1513220866.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:47.261Z,1513220867.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:47.331Z,1513220867.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:47.675Z,1513220867.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:47.694Z,1513220867.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:48.079Z,1513220868.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:48.099Z,1513220868.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:48.444Z,1513220868.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:48.478Z,1513220868.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:48.838Z,1513220868.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:48.875Z,1513220868.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:49.248Z,1513220869.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:49.282Z,1513220869.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:49.648Z,1513220869.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:49.685Z,1513220869.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:50.055Z,1513220870.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:50.080Z,1513220870.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:50.454Z,1513220870.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:50.488Z,1513220870.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:50.858Z,1513220870.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:50.880Z,1513220870.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:51.243Z,1513220871.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:51.263Z,1513220871.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:51.648Z,1513220871.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:51.663Z,1513220871.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:52.045Z,1513220872.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:52.061Z,1513220872.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:52.443Z,1513220872.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:52.462Z,1513220872.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:52.853Z,1513220872.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:52.916Z,1513220872.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:53.262Z,1513220873.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:53.277Z,1513220873.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:53.659Z,1513220873.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:53.674Z,1513220873.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:54.074Z,1513220874.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:54.163Z,1513220874.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:54.435Z,1513220874.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:54.471Z,1513220874.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:54.867Z,1513220874.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:54.923Z,1513220874.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:55.240Z,1513220875.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:55.272Z,1513220875.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:55.643Z,1513220875.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:55.691Z,1513220875.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:56.054Z,1513220876.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:56.087Z,1513220876.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:56.453Z,1513220876.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:56.476Z,1513220876.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:56.880Z,1513220876.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:56.902Z,1513220876.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:57.243Z,1513220877.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:57.334Z,1513220877.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:57.641Z,1513220877.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:57.674Z,1513220877.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:58.039Z,1513220878.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:58.066Z,1513220878.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:58.438Z,1513220878.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:58.464Z,1513220878.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:58.857Z,1513220878.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:58.883Z,1513220878.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:59.262Z,1513220879.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:59.283Z,1513220879.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:07:59.661Z,1513220879.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:07:59.684Z,1513220879.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:00.054Z,1513220880.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:00.068Z,1513220880.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:00.436Z,1513220880.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:00.528Z,1513220880.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:00.890Z,1513220880.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:00.931Z,1513220880.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:01.236Z,1513220881.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:01.251Z,1513220881.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:01.641Z,1513220881.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:01.656Z,1513220881.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:02.042Z,1513220882.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:02.057Z,1513220882.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:02.457Z,1513220882.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:02.480Z,1513220882.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:02.853Z,1513220882.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:02.887Z,1513220882.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:03.247Z,1513220883.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:03.281Z,1513220883.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:03.682Z,1513220883.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:03.747Z,1513220883.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:04.044Z,1513220884.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:04.063Z,1513220884.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:04.443Z,1513220884.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:04.458Z,1513220884.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:04.846Z,1513220884.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:04.860Z,1513220884.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:05.266Z,1513220885.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:05.299Z,1513220885.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:05.651Z,1513220885.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:05.666Z,1513220885.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:06.046Z,1513220886.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:06.061Z,1513220886.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:06.446Z,1513220886.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:06.460Z,1513220886.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:06.850Z,1513220886.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:06.924Z,1513220886.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:07.261Z,1513220887.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:07.276Z,1513220887.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:07.648Z,1513220887.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:07.674Z,1513220887.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:08.041Z,1513220888.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:08.072Z,1513220888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:08.465Z,1513220888.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:08.480Z,1513220888.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:08.876Z,1513220888.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:08.892Z,1513220888.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:09.240Z,1513220889.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:09.255Z,1513220889.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:09.642Z,1513220889.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:09.669Z,1513220889.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:10.043Z,1513220890.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:10.098Z,1513220890.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:10.436Z,1513220890.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:10.462Z,1513220890.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:10.858Z,1513220890.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:10.878Z,1513220890.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:11.254Z,1513220891.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:11.281Z,1513220891.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:11.662Z,1513220891.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:11.677Z,1513220891.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:12.045Z,1513220892.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:12.079Z,1513220892.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:12.435Z,1513220892.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:12.472Z,1513220892.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:12.856Z,1513220892.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:12.886Z,1513220892.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:13.274Z,1513220893.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:13.311Z,1513220893.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:13.641Z,1513220893.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:13.656Z,1513220893.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:14.054Z,1513220894.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:14.078Z,1513220894.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:14.453Z,1513220894.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:14.503Z,1513220894.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:14.911Z,1513220894.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:14.950Z,1513220894.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:15.240Z,1513220895.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:15.275Z,1513220895.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:15.647Z,1513220895.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:15.667Z,1513220895.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:16.045Z,1513220896.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:16.080Z,1513220896.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:16.454Z,1513220896.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:16.499Z,1513220896.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:16.839Z,1513220896.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:16.883Z,1513220896.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:17.254Z,1513220897.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:17.280Z,1513220897.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:17.667Z,1513220897.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:17.722Z,1513220897.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:18.052Z,1513220898.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:18.079Z,1513220898.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:18.443Z,1513220898.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:18.479Z,1513220898.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:18.837Z,1513220898.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:18.852Z,1513220898.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:19.250Z,1513220899.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:19.297Z,1513220899.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:19.636Z,1513220899.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:19.703Z,1513220899.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:20.046Z,1513220900.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:20.061Z,1513220900.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:20.453Z,1513220900.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:20.467Z,1513220900.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:20.870Z,1513220900.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:20.901Z,1513220900.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:21.248Z,1513220901.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:21.286Z,1513220901.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:21.642Z,1513220901.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:21.658Z,1513220901.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:22.038Z,1513220902.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:22.061Z,1513220902.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:22.444Z,1513220902.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:22.459Z,1513220902.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:22.896Z,1513220902.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:22.946Z,1513220902.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:23.250Z,1513220903.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:23.271Z,1513220903.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:23.654Z,1513220903.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:23.668Z,1513220903.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:24.054Z,1513220904.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:24.068Z,1513220904.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:24.449Z,1513220904.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:24.464Z,1513220904.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:24.866Z,1513220904.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:24.903Z,1513220904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:25.249Z,1513220905.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:25.271Z,1513220905.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:25.647Z,1513220905.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:25.662Z,1513220905.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:26.063Z,1513220906.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:26.125Z,1513220906.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:26.456Z,1513220906.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:26.479Z,1513220906.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:26.870Z,1513220906.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:26.908Z,1513220906.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:27.247Z,1513220907.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:27.266Z,1513220907.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:27.642Z,1513220907.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:27.665Z,1513220907.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:28.052Z,1513220908.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:28.071Z,1513220908.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:28.435Z,1513220908.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:28.476Z,1513220908.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:28.926Z,1513220908.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:28.953Z,1513220908.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:29.282Z,1513220909.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:29.323Z,1513220909.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:29.646Z,1513220909.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:29.675Z,1513220909.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:30.043Z,1513220910.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:30.077Z,1513220910.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:30.440Z,1513220910.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:30.455Z,1513220910.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:30.859Z,1513220910.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:30.891Z,1513220910.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:31.278Z,1513220911.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:31.292Z,1513220911.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:31.658Z,1513220911.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:31.688Z,1513220911.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:32.044Z,1513220912.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:32.059Z,1513220912.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:32.461Z,1513220912.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:32.510Z,1513220912.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:32.863Z,1513220912.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:32.889Z,1513220912.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:33.264Z,1513220913.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:33.289Z,1513220913.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:33.654Z,1513220913.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:33.695Z,1513220913.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:34.040Z,1513220914.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:34.055Z,1513220914.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:34.442Z,1513220914.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:34.465Z,1513220914.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:34.855Z,1513220914.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:34.891Z,1513220914.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:35.249Z,1513220915.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:35.264Z,1513220915.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:35.666Z,1513220915.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:35.697Z,1513220915.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:36.043Z,1513220916.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:36.063Z,1513220916.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:36.449Z,1513220916.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:36.522Z,1513220916.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:36.857Z,1513220916.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:36.902Z,1513220916.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:37.250Z,1513220917.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:37.265Z,1513220917.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:37.653Z,1513220917.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:37.668Z,1513220917.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:38.059Z,1513220918.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:38.112Z,1513220918.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:38.442Z,1513220918.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:38.456Z,1513220918.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:38.888Z,1513220918.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:38.904Z,1513220918.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:42.284Z,1513220922.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:42.342Z,1513220922.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:42.445Z,1513220922.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:42.487Z,1513220922.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:42.849Z,1513220922.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:42.931Z,1513220922.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:43.214Z,1513220923.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:43.238Z,1513220923.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:43.614Z,1513220923.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:43.636Z,1513220923.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:44.004Z,1513220924.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:44.018Z,1513220924.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:44.398Z,1513220924.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:44.420Z,1513220924.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:44.803Z,1513220924.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:44.817Z,1513220924.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:45.219Z,1513220925.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:45.267Z,1513220925.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:45.614Z,1513220925.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:45.629Z,1513220925.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:46.011Z,1513220926.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:46.025Z,1513220926.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:46.395Z,1513220926.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:46.421Z,1513220926.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:46.791Z,1513220926.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:46.818Z,1513220926.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:47.218Z,1513220927.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:47.243Z,1513220927.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:47.596Z,1513220927.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:47.636Z,1513220927.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:47.636Z,1513220927.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2017-12-14T03:08:47.636Z,1513220927.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:08:47.638Z,1513220927.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:47.638Z,1513220927.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2017-12-14T03:08:47.638Z,1513220927.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:08:47.640Z,1513220927.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:47.640Z,1513220927.640 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2017-12-14T03:08:47.640Z,1513220927.640 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:08:47.652Z,1513220927.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:08:47.652Z,1513220927.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:08:47.652Z,1513220927.652 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:08:48.010Z,1513220928.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:48.046Z,1513220928.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:08:48.046Z,1513220928.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2017-12-14T03:08:48.046Z,1513220928.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:08:48.046Z,1513220928.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2017-12-14T03:08:48.047Z,1513220928.047 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:08:48.047Z,1513220928.047 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2017-12-14T03:08:48.451Z,1513220928.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:48.488Z,1513220928.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:08:48.488Z,1513220928.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:08:48.488Z,1513220928.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:08:48.489Z,1513220928.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:08:48.489Z,1513220928.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:08:48.490Z,1513220928.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:08:48.490Z,1513220928.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:08:48.491Z,1513220928.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:08:48.491Z,1513220928.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:08:48.869Z,1513220928.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:48.884Z,1513220928.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:49.210Z,1513220929.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:49.225Z,1513220929.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:49.609Z,1513220929.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:49.624Z,1513220929.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:50.001Z,1513220930.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:50.028Z,1513220930.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:50.389Z,1513220930.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:50.426Z,1513220930.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:50.842Z,1513220930.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:50.878Z,1513220930.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:51.206Z,1513220931.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:51.251Z,1513220931.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:51.602Z,1513220931.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:51.667Z,1513220931.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:52.001Z,1513220932.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:52.042Z,1513220932.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:52.393Z,1513220932.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:52.423Z,1513220932.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:52.830Z,1513220932.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:52.865Z,1513220932.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:53.192Z,1513220933.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:53.219Z,1513220933.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:53.592Z,1513220933.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:53.619Z,1513220933.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:54.006Z,1513220934.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:54.035Z,1513220934.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:54.418Z,1513220934.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:54.432Z,1513220934.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:54.877Z,1513220934.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:54.915Z,1513220934.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:55.216Z,1513220935.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:55.230Z,1513220935.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:55.604Z,1513220935.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:55.624Z,1513220935.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:56.005Z,1513220936.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:56.020Z,1513220936.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:56.402Z,1513220936.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:56.419Z,1513220936.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:56.801Z,1513220936.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:56.900Z,1513220936.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:57.212Z,1513220937.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:57.226Z,1513220937.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:57.611Z,1513220937.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:57.625Z,1513220937.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:58.022Z,1513220938.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:58.085Z,1513220938.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:58.403Z,1513220938.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:58.440Z,1513220938.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:58.798Z,1513220938.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:58.813Z,1513220938.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:59.202Z,1513220939.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:59.234Z,1513220939.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:08:59.607Z,1513220939.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:08:59.627Z,1513220939.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:00.011Z,1513220940.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:00.026Z,1513220940.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:00.409Z,1513220940.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:00.425Z,1513220940.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:00.806Z,1513220940.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:00.827Z,1513220940.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:01.246Z,1513220941.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:01.297Z,1513220941.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:01.345Z,1513220941.345 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:09:01.608Z,1513220941.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:01.624Z,1513220941.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:01.998Z,1513220941.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:02.047Z,1513220942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:02.392Z,1513220942.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:02.420Z,1513220942.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:02.842Z,1513220942.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:02.873Z,1513220942.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:03.214Z,1513220943.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:03.259Z,1513220943.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:03.646Z,1513220943.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:03.662Z,1513220943.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:04.009Z,1513220944.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:04.059Z,1513220944.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:04.394Z,1513220944.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:04.425Z,1513220944.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:04.815Z,1513220944.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:04.895Z,1513220944.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:05.201Z,1513220945.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:05.231Z,1513220945.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:05.591Z,1513220945.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:05.618Z,1513220945.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:06.006Z,1513220946.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:06.039Z,1513220946.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:06.420Z,1513220946.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:06.434Z,1513220946.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:06.864Z,1513220946.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:06.883Z,1513220946.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:07.191Z,1513220947.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:07.230Z,1513220947.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:07.591Z,1513220947.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:07.616Z,1513220947.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:07.991Z,1513220947.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:08.005Z,1513220948.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:08.400Z,1513220948.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:08.431Z,1513220948.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:08.850Z,1513220948.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:08.900Z,1513220948.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:09.222Z,1513220949.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:09.243Z,1513220949.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:09.606Z,1513220949.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:09.633Z,1513220949.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:10.001Z,1513220950.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:10.033Z,1513220950.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:10.392Z,1513220950.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:10.407Z,1513220950.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:10.806Z,1513220950.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:10.929Z,1513220950.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:11.191Z,1513220951.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:11.219Z,1513220951.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:11.591Z,1513220951.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:11.625Z,1513220951.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:12.006Z,1513220952.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:12.021Z,1513220952.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:12.417Z,1513220952.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:12.431Z,1513220952.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:12.818Z,1513220952.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:12.833Z,1513220952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:13.196Z,1513220953.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:13.251Z,1513220953.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:13.595Z,1513220953.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:13.627Z,1513220953.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:13.999Z,1513220953.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:14.030Z,1513220954.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:14.395Z,1513220954.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:14.423Z,1513220954.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:14.802Z,1513220954.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:14.850Z,1513220954.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:15.224Z,1513220955.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:15.248Z,1513220955.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:15.606Z,1513220955.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:15.621Z,1513220955.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:16.014Z,1513220956.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:16.048Z,1513220956.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:16.403Z,1513220956.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:16.418Z,1513220956.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:16.844Z,1513220956.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:16.879Z,1513220956.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:17.191Z,1513220957.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:17.226Z,1513220957.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:17.592Z,1513220957.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:17.625Z,1513220957.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:18.010Z,1513220958.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:18.032Z,1513220958.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:18.416Z,1513220958.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:18.447Z,1513220958.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:18.865Z,1513220958.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:18.896Z,1513220958.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:19.206Z,1513220959.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:19.226Z,1513220959.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:19.605Z,1513220959.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:19.619Z,1513220959.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:20.005Z,1513220960.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:20.027Z,1513220960.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:20.405Z,1513220960.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:20.420Z,1513220960.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:20.847Z,1513220960.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:20.903Z,1513220960.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:21.222Z,1513220961.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:21.258Z,1513220961.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:21.610Z,1513220961.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:21.624Z,1513220961.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:22.010Z,1513220962.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:22.024Z,1513220962.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:22.404Z,1513220962.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:22.418Z,1513220962.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:22.848Z,1513220962.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:22.888Z,1513220962.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:23.202Z,1513220963.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:23.235Z,1513220963.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:23.599Z,1513220963.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:23.637Z,1513220963.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:24.010Z,1513220964.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:24.112Z,1513220964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:24.405Z,1513220964.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:24.443Z,1513220964.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:24.851Z,1513220964.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:24.939Z,1513220964.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:25.201Z,1513220965.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:25.243Z,1513220965.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:25.598Z,1513220965.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:25.648Z,1513220965.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:25.000Z,1513220966.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:26.020Z,1513220966.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:26.404Z,1513220966.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:26.419Z,1513220966.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:26.790Z,1513220966.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:26.822Z,1513220966.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:27.219Z,1513220967.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:27.260Z,1513220967.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:27.629Z,1513220967.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:27.644Z,1513220967.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:28.014Z,1513220968.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:28.043Z,1513220968.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:28.393Z,1513220968.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:28.407Z,1513220968.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:28.802Z,1513220968.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:28.816Z,1513220968.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:29.226Z,1513220969.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:29.246Z,1513220969.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:29.603Z,1513220969.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:29.645Z,1513220969.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:30.011Z,1513220970.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:30.041Z,1513220970.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:30.434Z,1513220970.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:30.494Z,1513220970.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:30.860Z,1513220970.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:30.917Z,1513220970.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:31.204Z,1513220971.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:31.219Z,1513220971.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:31.602Z,1513220971.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:31.617Z,1513220971.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:32.001Z,1513220972.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:32.016Z,1513220972.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:32.399Z,1513220972.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:32.414Z,1513220972.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:32.857Z,1513220972.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:32.903Z,1513220972.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:33.213Z,1513220973.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:33.245Z,1513220973.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:33.628Z,1513220973.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:33.687Z,1513220973.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:34.014Z,1513220974.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:34.044Z,1513220974.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:34.399Z,1513220974.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:34.414Z,1513220974.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:34.856Z,1513220974.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:34.898Z,1513220974.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:35.211Z,1513220975.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:35.230Z,1513220975.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:35.605Z,1513220975.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:35.619Z,1513220975.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:36.013Z,1513220976.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:36.028Z,1513220976.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:36.416Z,1513220976.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:36.430Z,1513220976.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:36.896Z,1513220976.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:36.948Z,1513220976.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:37.215Z,1513220977.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:37.243Z,1513220977.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:37.604Z,1513220977.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:37.621Z,1513220977.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:37.991Z,1513220977.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:38.018Z,1513220978.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:38.021Z,1513220978.021 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T03:09:38.021Z,1513220978.021 [Default:CheckIn:C.Wait] Stopped
2017-12-14T03:09:38.021Z,1513220978.021 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T03:09:38.021Z,1513220978.021 [Default:CheckIn:D] Running Loop=1
2017-12-14T03:09:38.392Z,1513220978.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:38.420Z,1513220978.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:38.424Z,1513220978.424 [Default:CheckIn:D] Stopped
2017-12-14T03:09:38.424Z,1513220978.424 [Default:CheckIn:E] Running Loop=1
2017-12-14T03:09:38.852Z,1513220978.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:38.914Z,1513220978.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:38.922Z,1513220978.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 156.383887 min 
2017-12-14T03:09:38.922Z,1513220978.922 [Default:CheckIn:E] Stopped
2017-12-14T03:09:38.922Z,1513220978.922 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn] Stopped
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn](INFO): Running loop #16
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn] Running Loop=16
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T03:09:38.923Z,1513220978.923 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T03:09:39.211Z,1513220979.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:39.230Z,1513220979.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:42.679Z,1513220982.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:42.699Z,1513220982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:42.820Z,1513220982.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:42.855Z,1513220982.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:43.198Z,1513220983.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:43.261Z,1513220983.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:43.587Z,1513220983.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:43.603Z,1513220983.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:43.983Z,1513220983.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:43.999Z,1513220983.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:44.383Z,1513220984.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:44.415Z,1513220984.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:44.841Z,1513220984.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:44.911Z,1513220984.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:45.199Z,1513220985.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:45.223Z,1513220985.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:45.596Z,1513220985.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:45.651Z,1513220985.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:45.982Z,1513220985.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:46.020Z,1513220986.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:46.374Z,1513220986.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:46.482Z,1513220986.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:46.857Z,1513220986.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:46.876Z,1513220986.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:47.172Z,1513220987.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:47.207Z,1513220987.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:47.575Z,1513220987.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:47.611Z,1513220987.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:47.993Z,1513220987.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:48.017Z,1513220988.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:48.393Z,1513220988.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:48.423Z,1513220988.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:48.847Z,1513220988.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:48.884Z,1513220988.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:49.176Z,1513220989.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:49.203Z,1513220989.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:49.586Z,1513220989.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:49.626Z,1513220989.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:49.982Z,1513220989.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:50.017Z,1513220990.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:50.378Z,1513220990.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:50.392Z,1513220990.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:50.844Z,1513220990.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:50.863Z,1513220990.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:51.201Z,1513220991.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:51.215Z,1513220991.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:51.595Z,1513220991.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:51.610Z,1513220991.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:51.990Z,1513220991.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:52.005Z,1513220992.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:52.390Z,1513220992.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:52.405Z,1513220992.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:52.793Z,1513220992.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:52.911Z,1513220992.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:53.173Z,1513220993.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:53.208Z,1513220993.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:53.580Z,1513220993.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:53.607Z,1513220993.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:53.996Z,1513220993.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:54.015Z,1513220994.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:54.402Z,1513220994.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:54.416Z,1513220994.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:54.796Z,1513220994.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:54.844Z,1513220994.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:55.194Z,1513220995.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:55.229Z,1513220995.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:55.576Z,1513220995.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:55.607Z,1513220995.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:55.974Z,1513220995.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:56.016Z,1513220996.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:56.387Z,1513220996.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:56.409Z,1513220996.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:56.781Z,1513220996.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:56.817Z,1513220996.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:57.219Z,1513220997.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:57.239Z,1513220997.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:57.590Z,1513220997.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:57.616Z,1513220997.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:57.989Z,1513220997.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:58.015Z,1513220998.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:58.383Z,1513220998.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:58.420Z,1513220998.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:58.845Z,1513220998.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:58.876Z,1513220998.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:59.221Z,1513220999.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:59.249Z,1513220999.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:59.581Z,1513220999.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:09:59.596Z,1513220999.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:09:59.990Z,1513220999.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:00.022Z,1513221000.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:00.393Z,1513221000.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:00.423Z,1513221000.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:00.856Z,1513221000.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:00.870Z,1513221000.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:01.172Z,1513221001.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:01.208Z,1513221001.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:01.579Z,1513221001.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:01.611Z,1513221001.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:01.972Z,1513221001.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:02.010Z,1513221002.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:02.375Z,1513221002.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:02.459Z,1513221002.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:02.844Z,1513221002.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:02.875Z,1513221002.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:03.194Z,1513221003.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:03.225Z,1513221003.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:03.598Z,1513221003.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:03.619Z,1513221003.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:03.997Z,1513221003.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:04.012Z,1513221004.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:04.379Z,1513221004.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:04.415Z,1513221004.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:04.854Z,1513221004.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:04.870Z,1513221004.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:05.185Z,1513221005.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:05.212Z,1513221005.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:05.609Z,1513221005.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:05.696Z,1513221005.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:05.986Z,1513221005.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:06.001Z,1513221006.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:06.398Z,1513221006.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:06.454Z,1513221006.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:06.789Z,1513221006.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:06.867Z,1513221006.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:07.178Z,1513221007.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:07.235Z,1513221007.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:07.582Z,1513221007.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:07.597Z,1513221007.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:07.976Z,1513221007.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:08.005Z,1513221008.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:08.380Z,1513221008.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:08.394Z,1513221008.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:08.778Z,1513221008.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:08.793Z,1513221008.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:09.200Z,1513221009.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:09.231Z,1513221009.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:09.595Z,1513221009.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:09.618Z,1513221009.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:10.005Z,1513221010.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:10.024Z,1513221010.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:10.376Z,1513221010.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:10.408Z,1513221010.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:10.775Z,1513221010.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:10.809Z,1513221010.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:11.195Z,1513221011.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:11.232Z,1513221011.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:11.579Z,1513221011.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:11.610Z,1513221011.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:12.031Z,1513221012.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:12.074Z,1513221012.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:12.394Z,1513221012.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:12.418Z,1513221012.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:12.848Z,1513221012.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:12.867Z,1513221012.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:13.166Z,1513221013.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:13.191Z,1513221013.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:13.573Z,1513221013.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:13.609Z,1513221013.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:13.975Z,1513221013.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:14.004Z,1513221014.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:14.376Z,1513221014.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:14.406Z,1513221014.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:14.834Z,1513221014.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:14.864Z,1513221014.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:15.233Z,1513221015.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:15.299Z,1513221015.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:15.586Z,1513221015.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:15.600Z,1513221015.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:15.986Z,1513221015.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:16.023Z,1513221016.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:16.382Z,1513221016.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:16.399Z,1513221016.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:16.849Z,1513221016.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:16.892Z,1513221016.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:17.187Z,1513221017.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:17.215Z,1513221017.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:17.572Z,1513221017.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:17.606Z,1513221017.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:18.000Z,1513221018.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:18.015Z,1513221018.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:18.433Z,1513221018.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:18.461Z,1513221018.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:18.852Z,1513221018.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:18.875Z,1513221018.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:19.176Z,1513221019.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:19.211Z,1513221019.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:19.580Z,1513221019.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:19.609Z,1513221019.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:19.979Z,1513221019.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:20.006Z,1513221020.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:20.375Z,1513221020.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:20.437Z,1513221020.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:20.776Z,1513221020.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:20.792Z,1513221020.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:21.191Z,1513221021.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:21.213Z,1513221021.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:21.630Z,1513221021.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:21.654Z,1513221021.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:21.990Z,1513221021.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:22.006Z,1513221022.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:22.371Z,1513221022.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:22.398Z,1513221022.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:22.772Z,1513221022.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:22.815Z,1513221022.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:23.204Z,1513221023.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:23.222Z,1513221023.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:23.575Z,1513221023.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:23.604Z,1513221023.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:23.994Z,1513221023.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:24.010Z,1513221024.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:24.397Z,1513221024.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:24.413Z,1513221024.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:24.819Z,1513221024.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:24.855Z,1513221024.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:25.206Z,1513221025.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:25.221Z,1513221025.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:25.576Z,1513221025.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:25.631Z,1513221025.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:25.971Z,1513221025.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:26.009Z,1513221026.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:26.371Z,1513221026.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:26.398Z,1513221026.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:26.842Z,1513221026.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:26.867Z,1513221026.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:27.181Z,1513221027.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:27.217Z,1513221027.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:27.585Z,1513221027.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:27.623Z,1513221027.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:28.011Z,1513221028.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:28.036Z,1513221028.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:28.380Z,1513221028.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:28.431Z,1513221028.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:28.839Z,1513221028.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:28.869Z,1513221028.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:29.176Z,1513221029.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:29.204Z,1513221029.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:29.571Z,1513221029.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:29.603Z,1513221029.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:29.000Z,1513221030.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:30.019Z,1513221030.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:30.382Z,1513221030.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:30.421Z,1513221030.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:30.852Z,1513221030.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:30.873Z,1513221030.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:31.222Z,1513221031.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:31.265Z,1513221031.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:31.583Z,1513221031.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:31.599Z,1513221031.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:31.987Z,1513221031.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:32.002Z,1513221032.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:32.386Z,1513221032.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:32.402Z,1513221032.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:32.845Z,1513221032.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:32.880Z,1513221032.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:33.197Z,1513221033.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:33.212Z,1513221033.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:33.594Z,1513221033.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:33.616Z,1513221033.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:33.987Z,1513221033.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:34.005Z,1513221034.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:34.380Z,1513221034.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:34.435Z,1513221034.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:34.776Z,1513221034.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:34.866Z,1513221034.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:35.177Z,1513221035.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:35.213Z,1513221035.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:35.571Z,1513221035.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:35.612Z,1513221035.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:35.999Z,1513221035.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:36.015Z,1513221036.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:36.382Z,1513221036.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:36.410Z,1513221036.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:36.782Z,1513221036.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:36.851Z,1513221036.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:37.191Z,1513221037.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:37.235Z,1513221037.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:37.627Z,1513221037.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:37.668Z,1513221037.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:37.982Z,1513221037.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:37.999Z,1513221037.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:38.383Z,1513221038.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:38.397Z,1513221038.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:38.781Z,1513221038.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:38.796Z,1513221038.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:39.202Z,1513221039.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:39.231Z,1513221039.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:39.587Z,1513221039.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:39.601Z,1513221039.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:43.068Z,1513221043.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:43.083Z,1513221043.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:43.186Z,1513221043.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:43.239Z,1513221043.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:43.536Z,1513221043.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:43.553Z,1513221043.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:43.953Z,1513221043.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:43.986Z,1513221043.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:44.344Z,1513221044.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:44.383Z,1513221044.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:44.739Z,1513221044.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:44.829Z,1513221044.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:45.154Z,1513221045.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:45.172Z,1513221045.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:45.550Z,1513221045.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:45.571Z,1513221045.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:45.950Z,1513221045.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:45.964Z,1513221045.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:46.345Z,1513221046.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:46.360Z,1513221046.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:46.738Z,1513221046.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:46.824Z,1513221046.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:47.132Z,1513221047.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:47.195Z,1513221047.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:47.532Z,1513221047.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:47.571Z,1513221047.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:47.956Z,1513221047.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:48.014Z,1513221048.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:48.359Z,1513221048.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:48.374Z,1513221048.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:48.756Z,1513221048.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:48.877Z,1513221048.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:49.129Z,1513221049.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:49.171Z,1513221049.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:49.542Z,1513221049.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:49.599Z,1513221049.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:49.938Z,1513221049.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:49.976Z,1513221049.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:50.377Z,1513221050.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:50.432Z,1513221050.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:50.740Z,1513221050.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:50.756Z,1513221050.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:51.183Z,1513221051.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:51.226Z,1513221051.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:51.549Z,1513221051.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:51.567Z,1513221051.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:51.951Z,1513221051.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:51.965Z,1513221051.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:52.334Z,1513221052.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:52.364Z,1513221052.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:52.748Z,1513221052.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:52.767Z,1513221052.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:53.180Z,1513221053.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:53.219Z,1513221053.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:53.536Z,1513221053.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:53.597Z,1513221053.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:53.942Z,1513221053.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:53.971Z,1513221053.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:54.355Z,1513221054.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:54.375Z,1513221054.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:54.784Z,1513221054.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:54.840Z,1513221054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:55.140Z,1513221055.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:55.156Z,1513221055.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:55.538Z,1513221055.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:55.555Z,1513221055.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:55.938Z,1513221055.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:55.956Z,1513221055.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:56.342Z,1513221056.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:56.358Z,1513221056.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:56.799Z,1513221056.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:56.860Z,1513221056.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:57.151Z,1513221057.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:57.168Z,1513221057.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:57.550Z,1513221057.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:57.566Z,1513221057.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:57.950Z,1513221057.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:57.964Z,1513221057.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:58.337Z,1513221058.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:58.352Z,1513221058.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:58.743Z,1513221058.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:58.847Z,1513221058.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:59.132Z,1513221059.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:59.159Z,1513221059.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:59.532Z,1513221059.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:59.563Z,1513221059.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:10:59.957Z,1513221059.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:10:59.972Z,1513221059.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:00.354Z,1513221060.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:00.381Z,1513221060.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:00.804Z,1513221060.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:00.850Z,1513221060.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:01.144Z,1513221061.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:01.160Z,1513221061.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:01.538Z,1513221061.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:01.559Z,1513221061.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:01.989Z,1513221061.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:02.003Z,1513221062.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:02.341Z,1513221062.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:02.357Z,1513221062.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:02.738Z,1513221062.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:02.754Z,1513221062.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:03.162Z,1513221063.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:03.217Z,1513221063.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:03.550Z,1513221063.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:03.580Z,1513221063.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:03.950Z,1513221063.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:03.971Z,1513221063.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:04.334Z,1513221064.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:04.348Z,1513221064.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:04.738Z,1513221064.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:04.753Z,1513221064.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:05.185Z,1513221065.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:05.224Z,1513221065.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:05.541Z,1513221065.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:05.557Z,1513221065.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:05.950Z,1513221065.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:05.979Z,1513221065.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:06.380Z,1513221066.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:06.426Z,1513221066.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:06.762Z,1513221066.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:06.792Z,1513221066.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:07.195Z,1513221067.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:07.215Z,1513221067.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:07.540Z,1513221067.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:07.557Z,1513221067.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:07.928Z,1513221067.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:07.944Z,1513221067.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:08.354Z,1513221068.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:08.369Z,1513221068.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:08.735Z,1513221068.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:08.831Z,1513221068.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:09.162Z,1513221069.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:09.176Z,1513221069.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:09.578Z,1513221069.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:09.651Z,1513221069.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:09.962Z,1513221069.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:09.998Z,1513221069.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:10.344Z,1513221070.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:10.360Z,1513221070.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:10.743Z,1513221070.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:10.863Z,1513221070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:11.131Z,1513221071.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:11.158Z,1513221071.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:11.532Z,1513221071.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:11.584Z,1513221071.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:11.956Z,1513221071.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:11.971Z,1513221071.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:12.355Z,1513221072.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:12.402Z,1513221072.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:12.796Z,1513221072.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:12.879Z,1513221072.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:13.141Z,1513221073.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:13.181Z,1513221073.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:13.535Z,1513221073.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:13.551Z,1513221073.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:13.940Z,1513221073.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:13.955Z,1513221073.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:14.338Z,1513221074.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:14.354Z,1513221074.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:14.740Z,1513221074.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:14.821Z,1513221074.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:15.151Z,1513221075.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:15.173Z,1513221075.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:15.554Z,1513221075.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:15.575Z,1513221075.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:15.954Z,1513221075.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:15.971Z,1513221075.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:16.331Z,1513221076.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:16.358Z,1513221076.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:16.731Z,1513221076.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:16.763Z,1513221076.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:17.131Z,1513221077.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:17.162Z,1513221077.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:17.531Z,1513221077.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:17.564Z,1513221077.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:17.958Z,1513221077.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:17.979Z,1513221077.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:18.359Z,1513221078.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:18.379Z,1513221078.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:18.791Z,1513221078.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:18.827Z,1513221078.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:19.327Z,1513221079.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:19.400Z,1513221079.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:19.559Z,1513221079.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:19.635Z,1513221079.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:19.934Z,1513221079.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:19.951Z,1513221079.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:20.350Z,1513221080.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:20.392Z,1513221080.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:20.776Z,1513221080.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:20.844Z,1513221080.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:21.200Z,1513221081.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:21.251Z,1513221081.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:21.560Z,1513221081.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:21.602Z,1513221081.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:21.944Z,1513221081.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:21.984Z,1513221081.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:22.346Z,1513221082.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:22.392Z,1513221082.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:22.742Z,1513221082.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:22.846Z,1513221082.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:23.154Z,1513221083.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:23.199Z,1513221083.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:23.544Z,1513221083.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:23.596Z,1513221083.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:23.948Z,1513221083.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:23.992Z,1513221083.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:24.358Z,1513221084.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:24.398Z,1513221084.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:24.776Z,1513221084.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:24.903Z,1513221084.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:25.158Z,1513221085.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:25.206Z,1513221085.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:25.531Z,1513221085.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:25.555Z,1513221085.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:25.953Z,1513221085.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:26.007Z,1513221086.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:26.344Z,1513221086.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:26.371Z,1513221086.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:26.804Z,1513221086.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:26.856Z,1513221086.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:27.158Z,1513221087.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:27.179Z,1513221087.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:27.555Z,1513221087.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:27.575Z,1513221087.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:27.962Z,1513221087.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:27.980Z,1513221087.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:28.331Z,1513221088.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:28.393Z,1513221088.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:28.800Z,1513221088.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:28.855Z,1513221088.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:29.142Z,1513221089.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:29.167Z,1513221089.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:29.535Z,1513221089.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:29.604Z,1513221089.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:29.964Z,1513221089.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:29.983Z,1513221089.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:30.350Z,1513221090.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:30.399Z,1513221090.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:30.748Z,1513221090.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:30.788Z,1513221090.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:31.134Z,1513221091.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:31.231Z,1513221091.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:31.534Z,1513221091.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:31.581Z,1513221091.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:31.932Z,1513221091.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:31.991Z,1513221091.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:32.334Z,1513221092.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:32.382Z,1513221092.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:32.785Z,1513221092.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:32.829Z,1513221092.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:33.175Z,1513221093.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:33.255Z,1513221093.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:33.548Z,1513221093.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:33.589Z,1513221093.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:33.953Z,1513221093.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:34.007Z,1513221094.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:34.355Z,1513221094.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:34.379Z,1513221094.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:34.742Z,1513221094.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:34.822Z,1513221094.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:35.200Z,1513221095.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:35.231Z,1513221095.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:35.532Z,1513221095.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:35.564Z,1513221095.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:35.972Z,1513221095.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:36.035Z,1513221096.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:36.357Z,1513221096.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:36.402Z,1513221096.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:36.760Z,1513221096.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:36.872Z,1513221096.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:37.133Z,1513221097.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:37.181Z,1513221097.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:37.533Z,1513221097.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:37.579Z,1513221097.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:37.952Z,1513221097.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:37.983Z,1513221097.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:38.338Z,1513221098.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:38.381Z,1513221098.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:38.743Z,1513221098.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:38.844Z,1513221098.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:39.160Z,1513221099.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:39.220Z,1513221099.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:39.552Z,1513221099.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:39.580Z,1513221099.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:39.977Z,1513221099.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:40.000Z,1513221100.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:43.639Z,1513221103.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:43.685Z,1513221103.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:43.814Z,1513221103.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:43.835Z,1513221103.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:44.157Z,1513221104.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:44.184Z,1513221104.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:44.561Z,1513221104.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:44.596Z,1513221104.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:44.959Z,1513221104.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:44.990Z,1513221104.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:45.348Z,1513221105.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:45.363Z,1513221105.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:45.750Z,1513221105.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:45.774Z,1513221105.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:46.158Z,1513221106.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:46.173Z,1513221106.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:46.555Z,1513221106.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:46.570Z,1513221106.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:46.960Z,1513221106.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:46.979Z,1513221106.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:47.359Z,1513221107.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:47.373Z,1513221107.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:47.758Z,1513221107.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:47.822Z,1513221107.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:48.152Z,1513221108.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:48.167Z,1513221108.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:48.550Z,1513221108.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:48.564Z,1513221108.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:48.564Z,1513221108.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2017-12-14T03:11:48.565Z,1513221108.565 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:11:48.566Z,1513221108.566 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:48.567Z,1513221108.567 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2017-12-14T03:11:48.567Z,1513221108.567 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:11:48.569Z,1513221108.569 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:48.569Z,1513221108.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2017-12-14T03:11:48.569Z,1513221108.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:11:48.581Z,1513221108.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:11:48.581Z,1513221108.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:11:48.581Z,1513221108.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:11:48.960Z,1513221108.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:49.018Z,1513221109.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:11:49.018Z,1513221109.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2017-12-14T03:11:49.019Z,1513221109.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:11:49.019Z,1513221109.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2017-12-14T03:11:49.019Z,1513221109.019 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:11:49.019Z,1513221109.019 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2017-12-14T03:11:49.346Z,1513221109.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:49.386Z,1513221109.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:11:49.386Z,1513221109.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:11:49.386Z,1513221109.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:11:49.387Z,1513221109.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:11:49.387Z,1513221109.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:11:49.388Z,1513221109.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:11:49.388Z,1513221109.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:11:49.388Z,1513221109.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:11:49.389Z,1513221109.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:11:49.742Z,1513221109.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:49.757Z,1513221109.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:50.153Z,1513221110.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:50.168Z,1513221110.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:50.558Z,1513221110.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:50.573Z,1513221110.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:50.955Z,1513221110.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:50.970Z,1513221110.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:51.350Z,1513221111.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:51.383Z,1513221111.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:51.741Z,1513221111.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:51.757Z,1513221111.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:52.143Z,1513221112.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:52.172Z,1513221112.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:52.542Z,1513221112.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:52.558Z,1513221112.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:52.953Z,1513221112.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:52.975Z,1513221112.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:53.357Z,1513221113.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:53.379Z,1513221113.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:53.754Z,1513221113.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:53.768Z,1513221113.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:54.172Z,1513221114.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:54.188Z,1513221114.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:54.540Z,1513221114.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:54.556Z,1513221114.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:54.940Z,1513221114.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:54.955Z,1513221114.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:55.346Z,1513221115.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:55.373Z,1513221115.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:55.747Z,1513221115.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:55.787Z,1513221115.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:56.153Z,1513221116.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:56.168Z,1513221116.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:56.553Z,1513221116.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:56.591Z,1513221116.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:56.954Z,1513221116.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:56.975Z,1513221116.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:57.340Z,1513221117.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:57.379Z,1513221117.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:57.780Z,1513221117.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:57.795Z,1513221117.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:58.138Z,1513221118.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:58.153Z,1513221118.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:58.549Z,1513221118.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:58.572Z,1513221118.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:58.957Z,1513221118.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:58.972Z,1513221118.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:59.353Z,1513221119.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:59.368Z,1513221119.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:11:59.766Z,1513221119.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:11:59.787Z,1513221119.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:00.141Z,1513221120.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:00.155Z,1513221120.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:00.545Z,1513221120.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:00.560Z,1513221120.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:00.940Z,1513221120.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:00.955Z,1513221120.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:01.339Z,1513221121.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:01.354Z,1513221121.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:01.740Z,1513221121.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:01.760Z,1513221121.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:02.155Z,1513221122.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:02.175Z,1513221122.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:02.545Z,1513221122.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:02.559Z,1513221122.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:02.953Z,1513221122.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:02.969Z,1513221122.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:03.343Z,1513221123.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:03.363Z,1513221123.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:03.748Z,1513221123.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:03.762Z,1513221123.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:04.142Z,1513221124.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:04.163Z,1513221124.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:04.540Z,1513221124.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:04.555Z,1513221124.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:04.953Z,1513221124.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:04.969Z,1513221124.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:05.357Z,1513221125.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:05.372Z,1513221125.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:05.773Z,1513221125.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:05.819Z,1513221125.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:06.140Z,1513221126.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:06.154Z,1513221126.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:06.542Z,1513221126.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:06.556Z,1513221126.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:06.940Z,1513221126.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:06.956Z,1513221126.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:07.341Z,1513221127.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:07.355Z,1513221127.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:07.743Z,1513221127.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:07.763Z,1513221127.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:08.149Z,1513221128.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:08.164Z,1513221128.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:08.557Z,1513221128.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:08.571Z,1513221128.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:08.953Z,1513221128.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:08.968Z,1513221128.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:09.336Z,1513221129.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:09.352Z,1513221129.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:09.741Z,1513221129.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:09.757Z,1513221129.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:10.146Z,1513221130.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:10.195Z,1513221130.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:10.540Z,1513221130.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:10.555Z,1513221130.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:10.953Z,1513221130.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:10.968Z,1513221130.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:11.355Z,1513221131.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:11.383Z,1513221131.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:11.762Z,1513221131.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:11.789Z,1513221131.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:12.139Z,1513221132.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:12.159Z,1513221132.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:12.539Z,1513221132.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:12.567Z,1513221132.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:12.939Z,1513221132.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:12.966Z,1513221132.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:13.345Z,1513221133.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:13.360Z,1513221133.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:13.739Z,1513221133.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:13.767Z,1513221133.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:14.154Z,1513221134.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:14.194Z,1513221134.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:14.568Z,1513221134.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:14.611Z,1513221134.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:14.960Z,1513221134.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:14.995Z,1513221134.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:15.339Z,1513221135.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:15.367Z,1513221135.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:15.739Z,1513221135.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:15.782Z,1513221135.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:16.139Z,1513221136.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:16.167Z,1513221136.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:16.547Z,1513221136.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:16.571Z,1513221136.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:16.956Z,1513221136.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:16.987Z,1513221136.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:17.358Z,1513221137.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:17.381Z,1513221137.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:17.758Z,1513221137.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:17.843Z,1513221137.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:18.148Z,1513221138.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:18.162Z,1513221138.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:18.549Z,1513221138.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:18.564Z,1513221138.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:18.948Z,1513221138.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:18.995Z,1513221138.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:19.350Z,1513221139.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:19.364Z,1513221139.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:19.748Z,1513221139.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:19.802Z,1513221139.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:20.161Z,1513221140.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:20.191Z,1513221140.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:20.553Z,1513221140.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:20.567Z,1513221140.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:20.951Z,1513221140.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:20.971Z,1513221140.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:21.355Z,1513221141.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:21.370Z,1513221141.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:21.754Z,1513221141.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:21.768Z,1513221141.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:22.150Z,1513221142.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:22.166Z,1513221142.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:22.543Z,1513221142.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:22.570Z,1513221142.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:22.958Z,1513221142.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:22.979Z,1513221142.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:23.358Z,1513221143.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:23.372Z,1513221143.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:23.757Z,1513221143.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:23.772Z,1513221143.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:24.180Z,1513221144.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:24.248Z,1513221144.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:24.553Z,1513221144.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:24.576Z,1513221144.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:24.948Z,1513221144.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:24.963Z,1513221144.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:25.350Z,1513221145.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:25.371Z,1513221145.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:25.754Z,1513221145.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:25.769Z,1513221145.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:26.185Z,1513221146.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:26.200Z,1513221146.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:26.570Z,1513221146.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:26.584Z,1513221146.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:26.958Z,1513221146.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:26.983Z,1513221146.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:27.377Z,1513221147.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:27.400Z,1513221147.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:27.756Z,1513221147.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:27.783Z,1513221147.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:28.049Z,1513221148.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:28.144Z,1513221148.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:28.203Z,1513221148.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:28.543Z,1513221148.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:28.560Z,1513221148.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:28.845Z,1513221148.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:28.953Z,1513221148.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:28.988Z,1513221148.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:29.361Z,1513221149.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:29.388Z,1513221149.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:29.762Z,1513221149.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:29.788Z,1513221149.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:30.145Z,1513221150.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:30.160Z,1513221150.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:30.580Z,1513221150.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:30.608Z,1513221150.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:30.957Z,1513221150.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:30.973Z,1513221150.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:31.349Z,1513221151.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:31.363Z,1513221151.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:31.761Z,1513221151.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:31.784Z,1513221151.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:32.155Z,1513221152.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:32.183Z,1513221152.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:32.562Z,1513221152.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:32.577Z,1513221152.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:32.960Z,1513221152.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:32.983Z,1513221152.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:33.343Z,1513221153.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:33.366Z,1513221153.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:33.791Z,1513221153.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:33.819Z,1513221153.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:34.144Z,1513221154.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:34.169Z,1513221154.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:34.539Z,1513221154.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:34.566Z,1513221154.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:34.964Z,1513221154.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:34.979Z,1513221154.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:35.362Z,1513221155.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:35.381Z,1513221155.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:35.765Z,1513221155.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:35.781Z,1513221155.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:36.139Z,1513221156.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:36.175Z,1513221156.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:36.543Z,1513221156.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:36.575Z,1513221156.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:36.991Z,1513221156.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:37.039Z,1513221157.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:37.345Z,1513221157.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:37.379Z,1513221157.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:37.743Z,1513221157.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:37.760Z,1513221157.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:38.158Z,1513221158.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:38.185Z,1513221158.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:38.561Z,1513221158.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:38.592Z,1513221158.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:38.971Z,1513221158.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:38.986Z,1513221158.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:39.346Z,1513221159.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:39.355Z,1513221159.355 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:12:39.355Z,1513221159.355 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:12:39.355Z,1513221159.355 [BPC1](ERROR): Data Fault
2017-12-14T03:12:39.363Z,1513221159.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:39.405Z,1513221159.405 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:12:39.746Z,1513221159.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:39.760Z,1513221159.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:40.148Z,1513221160.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:40.164Z,1513221160.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:43.746Z,1513221163.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:43.760Z,1513221163.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:43.774Z,1513221163.774 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:12:43.774Z,1513221163.774 [BPC1] No Fault, FailCount= 1
2017-12-14T03:12:43.874Z,1513221163.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:43.959Z,1513221163.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:44.230Z,1513221164.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:44.259Z,1513221164.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:44.633Z,1513221164.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:44.658Z,1513221164.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:45.018Z,1513221165.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:45.033Z,1513221165.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:45.422Z,1513221165.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:45.437Z,1513221165.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:45.821Z,1513221165.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:45.836Z,1513221165.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:46.218Z,1513221166.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:46.233Z,1513221166.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:46.635Z,1513221166.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:46.667Z,1513221166.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:47.034Z,1513221167.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:47.066Z,1513221167.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:47.429Z,1513221167.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:47.461Z,1513221167.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:47.822Z,1513221167.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:47.837Z,1513221167.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:48.223Z,1513221168.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:48.237Z,1513221168.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:48.618Z,1513221168.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:48.647Z,1513221168.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:49.026Z,1513221169.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:49.041Z,1513221169.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:49.426Z,1513221169.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:49.447Z,1513221169.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:49.824Z,1513221169.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:49.841Z,1513221169.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:50.219Z,1513221170.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:50.234Z,1513221170.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:50.621Z,1513221170.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:50.635Z,1513221170.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:51.018Z,1513221171.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:51.037Z,1513221171.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:51.420Z,1513221171.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:51.443Z,1513221171.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:51.812Z,1513221171.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:51.885Z,1513221171.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:52.218Z,1513221172.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:52.270Z,1513221172.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:52.622Z,1513221172.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:52.645Z,1513221172.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:53.033Z,1513221173.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:53.055Z,1513221173.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:53.411Z,1513221173.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:53.447Z,1513221173.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:53.815Z,1513221173.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:53.842Z,1513221173.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:54.213Z,1513221174.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:54.244Z,1513221174.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:54.608Z,1513221174.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:54.624Z,1513221174.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:55.022Z,1513221175.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:55.050Z,1513221175.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:55.425Z,1513221175.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:55.458Z,1513221175.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:55.826Z,1513221175.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:55.859Z,1513221175.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:56.212Z,1513221176.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:56.226Z,1513221176.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:56.615Z,1513221176.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:56.630Z,1513221176.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:57.012Z,1513221177.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:57.027Z,1513221177.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:57.418Z,1513221177.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:57.433Z,1513221177.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:57.815Z,1513221177.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:57.830Z,1513221177.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:58.188Z,1513221178.188 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:12:58.188Z,1513221178.188 [NAL9602] Data Fault, FailCount= 5
2017-12-14T03:12:58.188Z,1513221178.188 [NAL9602](ERROR): Data Fault
2017-12-14T03:12:58.212Z,1513221178.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:58.243Z,1513221178.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:58.273Z,1513221178.273 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:12:58.273Z,1513221178.273 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T03:12:58.598Z,1513221178.598 [NAL9602](INFO): Powering down
2017-12-14T03:12:58.621Z,1513221178.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:58.648Z,1513221178.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:58.664Z,1513221178.664 [CBIT](INFO): Critical error at 20171214T031258
2017-12-14T03:12:59.018Z,1513221179.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:59.034Z,1513221179.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:59.435Z,1513221179.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:59.478Z,1513221179.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:12:59.819Z,1513221179.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:12:59.833Z,1513221179.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:00.219Z,1513221180.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:00.234Z,1513221180.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:00.623Z,1513221180.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:00.638Z,1513221180.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:01.020Z,1513221181.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:01.035Z,1513221181.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:01.421Z,1513221181.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:01.436Z,1513221181.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:01.821Z,1513221181.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:01.836Z,1513221181.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:02.217Z,1513221182.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:02.247Z,1513221182.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:02.630Z,1513221182.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:02.651Z,1513221182.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:03.031Z,1513221183.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:03.046Z,1513221183.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:03.414Z,1513221183.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:03.443Z,1513221183.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:03.814Z,1513221183.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:03.841Z,1513221183.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:04.210Z,1513221184.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:04.263Z,1513221184.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:04.609Z,1513221184.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:04.671Z,1513221184.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:05.010Z,1513221185.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:05.041Z,1513221185.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:05.442Z,1513221185.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:05.474Z,1513221185.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:05.810Z,1513221185.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:05.859Z,1513221185.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:06.210Z,1513221186.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:06.226Z,1513221186.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:06.608Z,1513221186.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:06.662Z,1513221186.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:07.016Z,1513221187.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:07.039Z,1513221187.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:07.416Z,1513221187.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:07.431Z,1513221187.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:07.818Z,1513221187.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:07.833Z,1513221187.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:08.217Z,1513221188.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:08.232Z,1513221188.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:08.618Z,1513221188.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:08.633Z,1513221188.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:09.025Z,1513221189.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:09.066Z,1513221189.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:09.421Z,1513221189.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:09.436Z,1513221189.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:09.820Z,1513221189.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:09.835Z,1513221189.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:10.216Z,1513221190.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:10.231Z,1513221190.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:10.621Z,1513221190.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:10.636Z,1513221190.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:11.015Z,1513221191.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:11.031Z,1513221191.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:11.426Z,1513221191.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:11.462Z,1513221191.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:11.818Z,1513221191.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:11.833Z,1513221191.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:12.218Z,1513221192.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:12.232Z,1513221192.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:12.615Z,1513221192.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:12.630Z,1513221192.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:13.017Z,1513221193.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:13.053Z,1513221193.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:13.422Z,1513221193.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:13.437Z,1513221193.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:13.820Z,1513221193.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:13.836Z,1513221193.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:14.216Z,1513221194.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:14.239Z,1513221194.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:14.620Z,1513221194.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:14.635Z,1513221194.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:15.019Z,1513221195.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:15.067Z,1513221195.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:15.421Z,1513221195.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:15.437Z,1513221195.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:15.820Z,1513221195.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:15.835Z,1513221195.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:16.218Z,1513221196.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:16.232Z,1513221196.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:16.616Z,1513221196.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:16.635Z,1513221196.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:17.020Z,1513221197.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:17.039Z,1513221197.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:17.420Z,1513221197.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:17.435Z,1513221197.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:17.823Z,1513221197.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:17.838Z,1513221197.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:18.222Z,1513221198.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:18.237Z,1513221198.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:18.619Z,1513221198.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:18.636Z,1513221198.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:19.018Z,1513221199.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:19.034Z,1513221199.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:19.419Z,1513221199.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:19.439Z,1513221199.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:19.808Z,1513221199.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:19.835Z,1513221199.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:20.223Z,1513221200.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:20.239Z,1513221200.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:20.610Z,1513221200.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:20.636Z,1513221200.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:21.010Z,1513221201.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:21.038Z,1513221201.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:21.449Z,1513221201.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:21.497Z,1513221201.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:21.810Z,1513221201.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:21.847Z,1513221201.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:22.214Z,1513221202.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:22.241Z,1513221202.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:22.627Z,1513221202.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:22.642Z,1513221202.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:23.015Z,1513221203.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:23.051Z,1513221203.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:23.415Z,1513221203.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:23.443Z,1513221203.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:23.811Z,1513221203.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:23.836Z,1513221203.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:24.211Z,1513221204.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:24.236Z,1513221204.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:24.634Z,1513221204.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:24.669Z,1513221204.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:25.027Z,1513221205.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:25.052Z,1513221205.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:25.426Z,1513221205.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:25.442Z,1513221205.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:25.819Z,1513221205.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:25.841Z,1513221205.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:26.218Z,1513221206.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:26.232Z,1513221206.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:26.618Z,1513221206.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:26.663Z,1513221206.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:27.016Z,1513221207.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:27.039Z,1513221207.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:27.419Z,1513221207.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:27.479Z,1513221207.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:27.866Z,1513221207.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:27.927Z,1513221207.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:28.204Z,1513221208.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:28.231Z,1513221208.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:28.622Z,1513221208.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:28.659Z,1513221208.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:29.010Z,1513221209.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:29.047Z,1513221209.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:29.411Z,1513221209.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:29.468Z,1513221209.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:29.824Z,1513221209.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:29.838Z,1513221209.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:30.222Z,1513221210.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:30.237Z,1513221210.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:30.604Z,1513221210.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:30.638Z,1513221210.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:31.039Z,1513221211.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:31.090Z,1513221211.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:31.409Z,1513221211.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:31.438Z,1513221211.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:31.823Z,1513221211.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:31.838Z,1513221211.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:32.211Z,1513221212.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:32.236Z,1513221212.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:32.621Z,1513221212.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:32.637Z,1513221212.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:33.010Z,1513221213.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:33.035Z,1513221213.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:33.410Z,1513221213.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:33.435Z,1513221213.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:33.810Z,1513221213.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:33.835Z,1513221213.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:34.243Z,1513221214.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:34.271Z,1513221214.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:34.611Z,1513221214.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:34.647Z,1513221214.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:35.010Z,1513221215.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:35.047Z,1513221215.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:35.422Z,1513221215.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:35.436Z,1513221215.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:35.810Z,1513221215.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:35.839Z,1513221215.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:36.224Z,1513221216.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:36.238Z,1513221216.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:36.608Z,1513221216.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:36.640Z,1513221216.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:37.010Z,1513221217.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:37.044Z,1513221217.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:37.442Z,1513221217.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:37.507Z,1513221217.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:37.814Z,1513221217.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:37.839Z,1513221217.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:38.227Z,1513221218.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:38.241Z,1513221218.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:38.615Z,1513221218.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:38.641Z,1513221218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:39.010Z,1513221219.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:39.037Z,1513221219.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:39.410Z,1513221219.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:39.446Z,1513221219.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:39.814Z,1513221219.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:39.846Z,1513221219.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:40.211Z,1513221220.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:40.238Z,1513221220.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:43.705Z,1513221223.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:43.721Z,1513221223.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:43.869Z,1513221223.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:43.903Z,1513221223.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:44.203Z,1513221224.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:44.223Z,1513221224.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:44.610Z,1513221224.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:44.631Z,1513221224.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:45.014Z,1513221225.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:45.029Z,1513221225.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:45.402Z,1513221225.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:45.431Z,1513221225.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:45.811Z,1513221225.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:45.831Z,1513221225.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:46.210Z,1513221226.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:46.225Z,1513221226.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:46.606Z,1513221226.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:46.621Z,1513221226.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:47.021Z,1513221227.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:47.061Z,1513221227.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:47.404Z,1513221227.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:47.424Z,1513221227.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:47.810Z,1513221227.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:47.825Z,1513221227.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:48.214Z,1513221228.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:48.228Z,1513221228.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:48.607Z,1513221228.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:48.631Z,1513221228.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:49.006Z,1513221229.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:49.028Z,1513221229.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:49.405Z,1513221229.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:49.470Z,1513221229.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:49.812Z,1513221229.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:49.874Z,1513221229.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:50.244Z,1513221230.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:50.318Z,1513221230.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:50.597Z,1513221230.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:50.647Z,1513221230.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:50.998Z,1513221230.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:51.030Z,1513221231.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:51.398Z,1513221231.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:51.443Z,1513221231.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:51.800Z,1513221231.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:51.831Z,1513221231.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:52.199Z,1513221232.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:52.230Z,1513221232.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:52.603Z,1513221232.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:52.635Z,1513221232.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:52.996Z,1513221232.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:53.031Z,1513221233.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:53.406Z,1513221233.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:53.455Z,1513221233.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:53.805Z,1513221233.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:53.819Z,1513221233.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:54.200Z,1513221234.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:54.215Z,1513221234.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:54.605Z,1513221234.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:54.619Z,1513221234.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:55.008Z,1513221235.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:55.022Z,1513221235.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:55.408Z,1513221235.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:55.423Z,1513221235.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:55.804Z,1513221235.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:55.819Z,1513221235.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:56.206Z,1513221236.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:56.221Z,1513221236.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:56.629Z,1513221236.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:56.706Z,1513221236.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:57.021Z,1513221237.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:57.035Z,1513221237.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:57.402Z,1513221237.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:57.426Z,1513221237.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:57.802Z,1513221237.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:57.828Z,1513221237.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:58.198Z,1513221238.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:58.223Z,1513221238.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:58.598Z,1513221238.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:58.627Z,1513221238.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:58.998Z,1513221238.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:59.032Z,1513221239.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:59.406Z,1513221239.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:59.434Z,1513221239.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:13:59.799Z,1513221239.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:13:59.841Z,1513221239.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:00.199Z,1513221240.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:00.233Z,1513221240.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:00.603Z,1513221240.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:00.629Z,1513221240.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:01.001Z,1513221241.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:01.072Z,1513221241.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:01.395Z,1513221241.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:01.432Z,1513221241.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:01.802Z,1513221241.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:01.828Z,1513221241.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:02.199Z,1513221242.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:02.214Z,1513221242.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:02.602Z,1513221242.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:02.617Z,1513221242.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:03.041Z,1513221243.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:03.064Z,1513221243.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:03.408Z,1513221243.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:03.448Z,1513221243.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:03.799Z,1513221243.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:03.813Z,1513221243.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:04.204Z,1513221244.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:04.219Z,1513221244.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:04.610Z,1513221244.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:04.624Z,1513221244.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:05.014Z,1513221245.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:05.028Z,1513221245.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:05.404Z,1513221245.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:05.419Z,1513221245.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:05.807Z,1513221245.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:05.821Z,1513221245.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:06.222Z,1513221246.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:06.282Z,1513221246.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:06.606Z,1513221246.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:06.621Z,1513221246.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:07.007Z,1513221247.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:07.032Z,1513221247.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:07.405Z,1513221247.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:07.428Z,1513221247.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:07.802Z,1513221247.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:07.829Z,1513221247.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:08.197Z,1513221248.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:08.227Z,1513221248.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:08.598Z,1513221248.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:08.622Z,1513221248.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:09.010Z,1513221249.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:09.025Z,1513221249.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:09.449Z,1513221249.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:09.516Z,1513221249.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:09.798Z,1513221249.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:09.822Z,1513221249.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:10.210Z,1513221250.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:10.225Z,1513221250.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:10.619Z,1513221250.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:10.634Z,1513221250.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:11.005Z,1513221251.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:11.034Z,1513221251.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:11.398Z,1513221251.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:11.435Z,1513221251.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:11.798Z,1513221251.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:11.882Z,1513221251.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:12.200Z,1513221252.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:12.214Z,1513221252.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:12.641Z,1513221252.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:12.731Z,1513221252.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:13.010Z,1513221253.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:13.024Z,1513221253.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:13.403Z,1513221253.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:13.455Z,1513221253.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:13.806Z,1513221253.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:13.822Z,1513221253.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:14.206Z,1513221254.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:14.220Z,1513221254.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:14.599Z,1513221254.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:14.613Z,1513221254.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:15.014Z,1513221255.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:15.045Z,1513221255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:15.408Z,1513221255.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:15.422Z,1513221255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:15.808Z,1513221255.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:15.822Z,1513221255.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:16.207Z,1513221256.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:16.223Z,1513221256.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:16.607Z,1513221256.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:16.622Z,1513221256.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:17.008Z,1513221257.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:17.022Z,1513221257.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:17.408Z,1513221257.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:17.423Z,1513221257.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:17.807Z,1513221257.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:17.821Z,1513221257.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:18.202Z,1513221258.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:18.217Z,1513221258.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:18.607Z,1513221258.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:18.622Z,1513221258.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:19.049Z,1513221259.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:19.108Z,1513221259.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:19.406Z,1513221259.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:19.420Z,1513221259.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:19.808Z,1513221259.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:19.827Z,1513221259.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:20.207Z,1513221260.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:20.221Z,1513221260.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:20.603Z,1513221260.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:20.618Z,1513221260.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:21.007Z,1513221261.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:21.022Z,1513221261.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:21.404Z,1513221261.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:21.423Z,1513221261.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:21.804Z,1513221261.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:21.851Z,1513221261.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:22.224Z,1513221262.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:22.259Z,1513221262.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:22.606Z,1513221262.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:22.627Z,1513221262.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:23.007Z,1513221263.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:23.023Z,1513221263.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:23.406Z,1513221263.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:23.421Z,1513221263.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:23.808Z,1513221263.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:23.823Z,1513221263.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:24.207Z,1513221264.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:24.222Z,1513221264.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:24.611Z,1513221264.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:24.626Z,1513221264.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:24.998Z,1513221264.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:25.019Z,1513221265.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:25.440Z,1513221265.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:25.467Z,1513221265.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:25.800Z,1513221265.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:25.815Z,1513221265.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:26.202Z,1513221266.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:26.217Z,1513221266.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:26.600Z,1513221266.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:26.615Z,1513221266.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:27.011Z,1513221267.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:27.044Z,1513221267.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:27.408Z,1513221267.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:27.423Z,1513221267.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:27.806Z,1513221267.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:27.822Z,1513221267.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:28.200Z,1513221268.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:28.216Z,1513221268.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:28.650Z,1513221268.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:28.672Z,1513221268.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:29.008Z,1513221269.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:29.023Z,1513221269.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:29.409Z,1513221269.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:29.431Z,1513221269.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:29.808Z,1513221269.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:29.824Z,1513221269.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:30.207Z,1513221270.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:30.223Z,1513221270.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:30.607Z,1513221270.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:30.628Z,1513221270.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:31.006Z,1513221271.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:31.054Z,1513221271.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:31.409Z,1513221271.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:31.423Z,1513221271.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:31.808Z,1513221271.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:31.823Z,1513221271.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:32.217Z,1513221272.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:32.231Z,1513221272.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:32.611Z,1513221272.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:32.626Z,1513221272.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:33.007Z,1513221273.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:33.027Z,1513221273.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:33.404Z,1513221273.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:33.426Z,1513221273.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:33.808Z,1513221273.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:33.906Z,1513221273.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:34.206Z,1513221274.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:34.226Z,1513221274.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:34.599Z,1513221274.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:34.647Z,1513221274.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:35.044Z,1513221275.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:35.150Z,1513221275.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:35.403Z,1513221275.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:35.451Z,1513221275.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:35.805Z,1513221275.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:35.819Z,1513221275.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:36.200Z,1513221276.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:36.214Z,1513221276.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:36.600Z,1513221276.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:36.615Z,1513221276.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:37.011Z,1513221277.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:37.048Z,1513221277.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:37.406Z,1513221277.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:37.427Z,1513221277.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:37.809Z,1513221277.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:37.824Z,1513221277.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:38.207Z,1513221278.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:38.222Z,1513221278.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:38.599Z,1513221278.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:38.629Z,1513221278.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:38.999Z,1513221278.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:39.025Z,1513221279.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:39.029Z,1513221279.029 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T03:09:38.9Z
2017-12-14T03:14:39.029Z,1513221279.029 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:14:39.029Z,1513221279.029 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:14:39.399Z,1513221279.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:39.431Z,1513221279.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:40.170Z,1513221280.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:40.185Z,1513221280.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:40.283Z,1513221280.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:40.324Z,1513221280.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:43.820Z,1513221283.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:43.876Z,1513221283.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:43.942Z,1513221283.942 [DataOverHttps](INFO): Sending 89 bytes from file Logs/20171214T002839/Courier0064.lzma
2017-12-14T03:14:43.968Z,1513221283.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:44.021Z,1513221284.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:44.333Z,1513221284.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:44.348Z,1513221284.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:44.715Z,1513221284.715 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0064.lzma.bak
2017-12-14T03:14:44.716Z,1513221284.716 [DataOverHttps](INFO): SBD MOMSN=5437456
2017-12-14T03:14:44.739Z,1513221284.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:44.859Z,1513221284.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:45.863Z,1513221285.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:45.887Z,1513221285.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:45.998Z,1513221285.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:46.038Z,1513221286.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:49.693Z,1513221289.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:49.709Z,1513221289.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:49.709Z,1513221289.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2017-12-14T03:14:49.709Z,1513221289.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:14:49.711Z,1513221289.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:49.711Z,1513221289.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2017-12-14T03:14:49.711Z,1513221289.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:14:49.713Z,1513221289.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:49.713Z,1513221289.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2017-12-14T03:14:49.713Z,1513221289.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:14:49.753Z,1513221289.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:14:49.753Z,1513221289.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:14:49.754Z,1513221289.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:14:49.825Z,1513221289.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:49.881Z,1513221289.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:14:49.882Z,1513221289.882 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2017-12-14T03:14:49.882Z,1513221289.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:14:49.882Z,1513221289.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2017-12-14T03:14:49.883Z,1513221289.883 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:14:49.883Z,1513221289.883 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2017-12-14T03:14:50.206Z,1513221290.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:50.219Z,1513221290.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:14:50.219Z,1513221290.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:14:50.219Z,1513221290.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:14:50.220Z,1513221290.220 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:14:50.220Z,1513221290.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:14:50.222Z,1513221290.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:14:50.222Z,1513221290.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:14:50.222Z,1513221290.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:14:50.223Z,1513221290.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:14:50.598Z,1513221290.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:50.613Z,1513221290.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:51.001Z,1513221291.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:51.016Z,1513221291.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:51.402Z,1513221291.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:51.416Z,1513221291.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:54.952Z,1513221294.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:54.967Z,1513221294.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:55.046Z,1513221295.046 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20171214T002839/Express0065.lzma
2017-12-14T03:14:55.066Z,1513221295.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:55.114Z,1513221295.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:55.426Z,1513221295.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:55.463Z,1513221295.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:55.799Z,1513221295.799 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0065.lzma.bak
2017-12-14T03:14:55.799Z,1513221295.799 [DataOverHttps](INFO): SBD MOMSN=5437459
2017-12-14T03:14:55.826Z,1513221295.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:55.920Z,1513221295.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:57.010Z,1513221297.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:57.025Z,1513221297.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:14:57.028Z,1513221297.028 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:14:57.028Z,1513221297.028 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:14:57.029Z,1513221297.029 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:14:57.139Z,1513221297.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:14:57.191Z,1513221297.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:00.582Z,1513221300.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:00.627Z,1513221300.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:00.641Z,1513221300.641 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:15:00.641Z,1513221300.641 [NAL9602] No Fault, FailCount= 5
2017-12-14T03:15:00.711Z,1513221300.711 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:15:00.729Z,1513221300.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:00.766Z,1513221300.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:01.091Z,1513221301.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:01.150Z,1513221301.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:01.484Z,1513221301.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:01.499Z,1513221301.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:01.880Z,1513221301.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:01.899Z,1513221301.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:02.291Z,1513221302.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:02.333Z,1513221302.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:02.680Z,1513221302.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:02.695Z,1513221302.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:03.080Z,1513221303.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:03.168Z,1513221303.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:03.486Z,1513221303.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:03.501Z,1513221303.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:03.884Z,1513221303.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:03.899Z,1513221303.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:04.279Z,1513221304.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:04.294Z,1513221304.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:04.685Z,1513221304.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:04.700Z,1513221304.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:05.080Z,1513221305.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:05.180Z,1513221305.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:05.474Z,1513221305.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:05.501Z,1513221305.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:05.876Z,1513221305.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:05.915Z,1513221305.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:06.272Z,1513221306.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:06.295Z,1513221306.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:06.672Z,1513221306.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:06.707Z,1513221306.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:07.098Z,1513221307.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:07.113Z,1513221307.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:07.474Z,1513221307.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:07.497Z,1513221307.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:07.875Z,1513221307.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:07.906Z,1513221307.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:08.279Z,1513221308.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:08.315Z,1513221308.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:08.682Z,1513221308.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:08.709Z,1513221308.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:09.084Z,1513221309.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:09.103Z,1513221309.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:09.496Z,1513221309.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:09.543Z,1513221309.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:09.884Z,1513221309.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:09.901Z,1513221309.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:10.289Z,1513221310.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:10.304Z,1513221310.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:10.679Z,1513221310.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:10.703Z,1513221310.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:11.074Z,1513221311.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:11.113Z,1513221311.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:11.500Z,1513221311.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:11.531Z,1513221311.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:11.858Z,1513221311.858 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:15:11.875Z,1513221311.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:11.911Z,1513221311.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:12.283Z,1513221312.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:12.320Z,1513221312.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:12.682Z,1513221312.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:12.705Z,1513221312.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:13.106Z,1513221313.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:13.136Z,1513221313.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:13.488Z,1513221313.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:13.508Z,1513221313.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:13.887Z,1513221313.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:13.902Z,1513221313.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:14.288Z,1513221314.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:14.303Z,1513221314.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:14.704Z,1513221314.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:14.739Z,1513221314.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:15.085Z,1513221315.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:15.112Z,1513221315.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:15.494Z,1513221315.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:15.526Z,1513221315.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:15.896Z,1513221315.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:15.925Z,1513221315.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:16.277Z,1513221316.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:16.292Z,1513221316.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:16.687Z,1513221316.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:16.723Z,1513221316.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:17.085Z,1513221317.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:17.191Z,1513221317.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:17.509Z,1513221317.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:17.538Z,1513221317.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:17.889Z,1513221317.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:17.904Z,1513221317.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:18.292Z,1513221318.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:18.308Z,1513221318.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:18.698Z,1513221318.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:18.713Z,1513221318.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:19.147Z,1513221319.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:19.205Z,1513221319.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:19.483Z,1513221319.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:19.514Z,1513221319.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:19.881Z,1513221319.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:19.896Z,1513221319.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:20.288Z,1513221320.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:20.304Z,1513221320.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:20.686Z,1513221320.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:20.701Z,1513221320.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:21.149Z,1513221321.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:21.204Z,1513221321.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:21.502Z,1513221321.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:21.562Z,1513221321.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:21.900Z,1513221321.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:21.960Z,1513221321.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:22.274Z,1513221322.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:22.327Z,1513221322.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:22.679Z,1513221322.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:22.713Z,1513221322.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:23.078Z,1513221323.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:23.118Z,1513221323.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:23.485Z,1513221323.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:23.499Z,1513221323.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:23.882Z,1513221323.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:23.909Z,1513221323.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:24.290Z,1513221324.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:24.304Z,1513221324.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:24.697Z,1513221324.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:24.712Z,1513221324.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:25.086Z,1513221325.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:25.108Z,1513221325.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:25.490Z,1513221325.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:25.561Z,1513221325.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:25.882Z,1513221325.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:25.913Z,1513221325.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:26.281Z,1513221326.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:26.296Z,1513221326.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:26.682Z,1513221326.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:26.696Z,1513221326.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:27.098Z,1513221327.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:27.129Z,1513221327.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:27.540Z,1513221327.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:27.580Z,1513221327.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:27.894Z,1513221327.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:27.925Z,1513221327.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:28.281Z,1513221328.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:28.296Z,1513221328.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:28.685Z,1513221328.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:28.700Z,1513221328.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:29.098Z,1513221329.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:29.129Z,1513221329.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:29.480Z,1513221329.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:29.504Z,1513221329.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:29.882Z,1513221329.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:29.896Z,1513221329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:30.285Z,1513221330.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:30.307Z,1513221330.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:30.726Z,1513221330.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:30.757Z,1513221330.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:31.116Z,1513221331.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:31.217Z,1513221331.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:31.476Z,1513221331.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:31.511Z,1513221331.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:31.875Z,1513221331.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:31.911Z,1513221331.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:32.279Z,1513221332.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:32.312Z,1513221332.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:32.707Z,1513221332.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:32.723Z,1513221332.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:33.107Z,1513221333.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:33.180Z,1513221333.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:33.489Z,1513221333.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:33.504Z,1513221333.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:33.892Z,1513221333.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:33.939Z,1513221333.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:34.283Z,1513221334.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:34.299Z,1513221334.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:34.682Z,1513221334.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:34.697Z,1513221334.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:35.084Z,1513221335.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:35.107Z,1513221335.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:35.485Z,1513221335.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:35.507Z,1513221335.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:35.890Z,1513221335.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:35.904Z,1513221335.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:36.306Z,1513221336.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:36.336Z,1513221336.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:36.690Z,1513221336.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:36.705Z,1513221336.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:37.116Z,1513221337.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:37.237Z,1513221337.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:37.485Z,1513221337.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:37.500Z,1513221337.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:37.884Z,1513221337.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:37.899Z,1513221337.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:38.292Z,1513221338.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:38.327Z,1513221338.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:38.685Z,1513221338.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:38.699Z,1513221338.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:39.088Z,1513221339.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:39.115Z,1513221339.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:39.496Z,1513221339.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:39.516Z,1513221339.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:39.896Z,1513221339.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:39.944Z,1513221339.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:40.289Z,1513221340.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:40.311Z,1513221340.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:40.691Z,1513221340.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:40.706Z,1513221340.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:41.078Z,1513221341.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:41.109Z,1513221341.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:41.487Z,1513221341.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:41.522Z,1513221341.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:41.889Z,1513221341.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:41.918Z,1513221341.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:42.289Z,1513221342.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:42.323Z,1513221342.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:42.693Z,1513221342.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:42.723Z,1513221342.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:43.080Z,1513221343.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:43.135Z,1513221343.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:43.508Z,1513221343.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:43.591Z,1513221343.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:43.884Z,1513221343.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:43.919Z,1513221343.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:44.281Z,1513221344.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:44.328Z,1513221344.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:44.686Z,1513221344.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:44.700Z,1513221344.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:45.141Z,1513221345.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:45.207Z,1513221345.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:45.490Z,1513221345.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:45.504Z,1513221345.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:45.887Z,1513221345.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:45.901Z,1513221345.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:46.279Z,1513221346.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:46.298Z,1513221346.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:46.685Z,1513221346.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:46.699Z,1513221346.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:47.097Z,1513221347.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:47.176Z,1513221347.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:47.476Z,1513221347.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:47.511Z,1513221347.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:47.900Z,1513221347.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:47.915Z,1513221347.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:48.298Z,1513221348.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:48.318Z,1513221348.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:48.700Z,1513221348.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:48.715Z,1513221348.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:49.079Z,1513221349.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:49.094Z,1513221349.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:49.481Z,1513221349.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:49.496Z,1513221349.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:49.941Z,1513221349.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:49.983Z,1513221349.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:50.287Z,1513221350.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:50.327Z,1513221350.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:50.697Z,1513221350.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:50.731Z,1513221350.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:51.089Z,1513221351.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:51.123Z,1513221351.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:51.497Z,1513221351.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:51.518Z,1513221351.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:51.880Z,1513221351.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:51.912Z,1513221351.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:52.276Z,1513221352.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:52.299Z,1513221352.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:52.675Z,1513221352.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:52.711Z,1513221352.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:53.140Z,1513221353.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:53.184Z,1513221353.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:53.490Z,1513221353.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:53.538Z,1513221353.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:53.890Z,1513221353.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:53.904Z,1513221353.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:54.286Z,1513221354.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:54.300Z,1513221354.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:54.687Z,1513221354.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:54.703Z,1513221354.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:55.078Z,1513221355.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:55.110Z,1513221355.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:55.479Z,1513221355.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:55.500Z,1513221355.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:55.898Z,1513221355.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:55.913Z,1513221355.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:56.321Z,1513221356.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:56.350Z,1513221356.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:56.695Z,1513221356.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:56.710Z,1513221356.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:57.075Z,1513221357.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:57.104Z,1513221357.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:15:57.485Z,1513221357.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:15:57.507Z,1513221357.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:00.902Z,1513221360.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:00.921Z,1513221360.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:01.020Z,1513221361.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:01.051Z,1513221361.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:01.414Z,1513221361.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:01.436Z,1513221361.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:01.822Z,1513221361.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:01.843Z,1513221361.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:02.222Z,1513221362.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:02.237Z,1513221362.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:02.615Z,1513221362.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:02.630Z,1513221362.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:03.016Z,1513221363.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:03.051Z,1513221363.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:03.403Z,1513221363.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:03.439Z,1513221363.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:03.813Z,1513221363.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:03.839Z,1513221363.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:04.228Z,1513221364.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:04.247Z,1513221364.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:04.631Z,1513221364.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:04.646Z,1513221364.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:05.003Z,1513221365.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:05.042Z,1513221365.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:05.407Z,1513221365.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:05.468Z,1513221365.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:05.807Z,1513221365.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:05.891Z,1513221365.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:06.210Z,1513221366.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:06.242Z,1513221366.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:06.609Z,1513221366.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:06.623Z,1513221366.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:07.018Z,1513221367.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:07.063Z,1513221367.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:07.418Z,1513221367.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:07.450Z,1513221367.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:07.826Z,1513221367.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:07.875Z,1513221367.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:08.211Z,1513221368.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:08.251Z,1513221368.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:08.607Z,1513221368.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:08.621Z,1513221368.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:09.013Z,1513221369.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:09.028Z,1513221369.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:09.404Z,1513221369.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:09.430Z,1513221369.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:09.823Z,1513221369.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:09.838Z,1513221369.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:10.225Z,1513221370.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:10.247Z,1513221370.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:10.617Z,1513221370.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:10.632Z,1513221370.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:11.003Z,1513221371.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:11.036Z,1513221371.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:11.403Z,1513221371.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:11.430Z,1513221371.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:11.804Z,1513221371.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:11.840Z,1513221371.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:12.245Z,1513221372.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:12.283Z,1513221372.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:12.603Z,1513221372.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:12.636Z,1513221372.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:13.025Z,1513221373.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:13.040Z,1513221373.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:13.417Z,1513221373.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:13.447Z,1513221373.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:13.832Z,1513221373.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:13.851Z,1513221373.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:14.201Z,1513221374.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:14.216Z,1513221374.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:14.606Z,1513221374.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:14.622Z,1513221374.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:15.006Z,1513221375.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:15.020Z,1513221375.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:15.448Z,1513221375.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:15.493Z,1513221375.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:15.840Z,1513221375.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:15.855Z,1513221375.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:16.221Z,1513221376.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:16.272Z,1513221376.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:16.618Z,1513221376.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:16.650Z,1513221376.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:17.008Z,1513221377.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:17.027Z,1513221377.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:17.404Z,1513221377.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:17.420Z,1513221377.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:17.807Z,1513221377.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:17.827Z,1513221377.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:18.208Z,1513221378.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:18.223Z,1513221378.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:18.609Z,1513221378.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:18.664Z,1513221378.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:19.023Z,1513221379.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:19.068Z,1513221379.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:19.422Z,1513221379.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:19.440Z,1513221379.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:19.827Z,1513221379.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:19.851Z,1513221379.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:20.207Z,1513221380.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:20.242Z,1513221380.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:20.630Z,1513221380.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:20.687Z,1513221380.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:21.007Z,1513221381.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:21.027Z,1513221381.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:21.410Z,1513221381.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:21.461Z,1513221381.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:21.851Z,1513221381.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:21.940Z,1513221381.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:22.250Z,1513221382.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:22.279Z,1513221382.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:22.624Z,1513221382.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:22.667Z,1513221382.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:23.036Z,1513221383.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:23.063Z,1513221383.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:23.422Z,1513221383.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:23.466Z,1513221383.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:23.816Z,1513221383.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:23.860Z,1513221383.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:24.214Z,1513221384.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:24.260Z,1513221384.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:24.615Z,1513221384.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:24.639Z,1513221384.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:25.032Z,1513221385.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:25.064Z,1513221385.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:25.451Z,1513221385.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:25.487Z,1513221385.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:25.831Z,1513221385.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:25.851Z,1513221385.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:26.256Z,1513221386.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:26.279Z,1513221386.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:26.611Z,1513221386.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:26.631Z,1513221386.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:27.032Z,1513221387.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:27.064Z,1513221387.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:27.404Z,1513221387.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:27.440Z,1513221387.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:27.820Z,1513221387.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:27.869Z,1513221387.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:28.226Z,1513221388.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:28.320Z,1513221388.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:28.642Z,1513221388.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:28.658Z,1513221388.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:29.003Z,1513221389.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:29.038Z,1513221389.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:29.419Z,1513221389.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:29.479Z,1513221389.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:29.815Z,1513221389.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:29.830Z,1513221389.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:30.228Z,1513221390.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:30.279Z,1513221390.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:30.616Z,1513221390.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:30.639Z,1513221390.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:31.026Z,1513221391.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:31.053Z,1513221391.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:31.429Z,1513221391.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:31.455Z,1513221391.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:31.835Z,1513221391.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:31.863Z,1513221391.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:32.212Z,1513221392.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:32.235Z,1513221392.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:32.604Z,1513221392.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:32.684Z,1513221392.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:33.012Z,1513221393.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:33.059Z,1513221393.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:33.406Z,1513221393.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:33.438Z,1513221393.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:33.824Z,1513221393.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:33.852Z,1513221393.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:34.228Z,1513221394.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:34.279Z,1513221394.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:34.626Z,1513221394.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:34.649Z,1513221394.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:35.042Z,1513221395.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:35.100Z,1513221395.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:35.424Z,1513221395.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:35.449Z,1513221395.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:35.805Z,1513221395.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:35.844Z,1513221395.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:36.206Z,1513221396.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:36.248Z,1513221396.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:36.604Z,1513221396.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:36.688Z,1513221396.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:37.026Z,1513221397.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:37.047Z,1513221397.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:37.418Z,1513221397.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:37.444Z,1513221397.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:37.817Z,1513221397.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:37.849Z,1513221397.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:38.228Z,1513221398.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:38.271Z,1513221398.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:38.603Z,1513221398.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:38.660Z,1513221398.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:39.004Z,1513221399.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:39.039Z,1513221399.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:39.417Z,1513221399.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:39.432Z,1513221399.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:39.820Z,1513221399.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:39.840Z,1513221399.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:40.228Z,1513221400.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:40.251Z,1513221400.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:40.625Z,1513221400.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:40.648Z,1513221400.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:41.015Z,1513221401.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:41.033Z,1513221401.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:41.411Z,1513221401.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:41.481Z,1513221401.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:41.803Z,1513221401.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:41.829Z,1513221401.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:42.203Z,1513221402.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:42.229Z,1513221402.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:42.607Z,1513221402.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:42.633Z,1513221402.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:43.024Z,1513221403.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:43.038Z,1513221403.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:43.427Z,1513221403.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:43.447Z,1513221403.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:43.827Z,1513221403.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:43.842Z,1513221403.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:44.207Z,1513221404.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:44.238Z,1513221404.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:44.615Z,1513221404.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:44.645Z,1513221404.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:45.004Z,1513221405.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:45.042Z,1513221405.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:45.407Z,1513221405.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:45.428Z,1513221405.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:45.820Z,1513221405.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:45.844Z,1513221405.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:46.230Z,1513221406.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:46.251Z,1513221406.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:46.626Z,1513221406.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:46.641Z,1513221406.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:47.003Z,1513221407.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:47.030Z,1513221407.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:47.403Z,1513221407.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:47.430Z,1513221407.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:47.815Z,1513221407.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:47.836Z,1513221407.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:48.203Z,1513221408.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:48.228Z,1513221408.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:48.603Z,1513221408.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:48.629Z,1513221408.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:49.027Z,1513221409.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:49.047Z,1513221409.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:49.430Z,1513221409.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:49.445Z,1513221409.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:49.832Z,1513221409.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:49.847Z,1513221409.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:50.205Z,1513221410.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:50.231Z,1513221410.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:50.619Z,1513221410.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:50.696Z,1513221410.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:51.050Z,1513221411.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:51.100Z,1513221411.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:51.412Z,1513221411.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:51.528Z,1513221411.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:51.822Z,1513221411.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:51.848Z,1513221411.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:52.222Z,1513221412.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:52.271Z,1513221412.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:52.626Z,1513221412.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:52.659Z,1513221412.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:53.014Z,1513221413.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:53.048Z,1513221413.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:53.411Z,1513221413.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:53.426Z,1513221413.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:53.811Z,1513221413.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:53.831Z,1513221413.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:54.258Z,1513221414.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:54.312Z,1513221414.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:54.608Z,1513221414.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:54.622Z,1513221414.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:55.025Z,1513221415.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:55.158Z,1513221415.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:55.422Z,1513221415.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:55.445Z,1513221415.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:55.827Z,1513221415.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:55.842Z,1513221415.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:56.215Z,1513221416.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:56.229Z,1513221416.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:56.603Z,1513221416.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:56.639Z,1513221416.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:57.007Z,1513221417.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:57.034Z,1513221417.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:57.430Z,1513221417.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:57.454Z,1513221417.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:16:57.836Z,1513221417.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:16:57.855Z,1513221417.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:01.465Z,1513221421.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:01.512Z,1513221421.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:01.618Z,1513221421.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:01.649Z,1513221421.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:01.964Z,1513221421.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:01.978Z,1513221421.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:02.365Z,1513221422.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:02.380Z,1513221422.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:02.779Z,1513221422.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:02.854Z,1513221422.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:03.179Z,1513221423.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:03.212Z,1513221423.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:03.571Z,1513221423.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:03.610Z,1513221423.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:03.979Z,1513221423.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:04.011Z,1513221424.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:04.381Z,1513221424.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:04.411Z,1513221424.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:04.864Z,1513221424.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:04.912Z,1513221424.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:05.172Z,1513221425.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:05.199Z,1513221425.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:05.566Z,1513221425.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:05.594Z,1513221425.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:05.974Z,1513221425.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:05.995Z,1513221425.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:06.371Z,1513221426.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:06.391Z,1513221426.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:06.771Z,1513221426.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:06.785Z,1513221426.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:07.191Z,1513221427.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:07.226Z,1513221427.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:07.587Z,1513221427.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:07.602Z,1513221427.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:07.977Z,1513221427.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:07.993Z,1513221427.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:08.360Z,1513221428.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:08.433Z,1513221428.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:08.764Z,1513221428.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:08.791Z,1513221428.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:09.203Z,1513221429.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:09.278Z,1513221429.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:09.561Z,1513221429.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:09.599Z,1513221429.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:09.988Z,1513221429.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:10.004Z,1513221430.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:10.383Z,1513221430.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:10.412Z,1513221430.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:10.783Z,1513221430.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:10.798Z,1513221430.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:11.188Z,1513221431.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:11.228Z,1513221431.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:11.564Z,1513221431.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:11.580Z,1513221431.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:11.965Z,1513221431.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:11.980Z,1513221431.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:12.366Z,1513221432.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:12.382Z,1513221432.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:12.827Z,1513221432.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:12.888Z,1513221432.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:13.193Z,1513221433.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:13.258Z,1513221433.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:13.576Z,1513221433.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:13.619Z,1513221433.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:13.981Z,1513221433.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:14.036Z,1513221434.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:14.367Z,1513221434.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:14.390Z,1513221434.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:14.789Z,1513221434.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:14.850Z,1513221434.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:15.166Z,1513221435.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:15.222Z,1513221435.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:15.572Z,1513221435.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:15.636Z,1513221435.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:15.987Z,1513221435.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:16.039Z,1513221436.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:16.383Z,1513221436.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:16.397Z,1513221436.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:16.822Z,1513221436.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:16.870Z,1513221436.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:17.168Z,1513221437.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:17.192Z,1513221437.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:17.568Z,1513221437.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:17.591Z,1513221437.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:17.971Z,1513221437.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:17.986Z,1513221437.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:18.386Z,1513221438.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:18.423Z,1513221438.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:18.816Z,1513221438.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:18.839Z,1513221438.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:19.173Z,1513221439.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:19.196Z,1513221439.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:19.594Z,1513221439.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:19.617Z,1513221439.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:19.977Z,1513221439.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:19.992Z,1513221439.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:20.360Z,1513221440.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:20.391Z,1513221440.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:20.759Z,1513221440.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:20.863Z,1513221440.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:21.164Z,1513221441.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:21.196Z,1513221441.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:21.560Z,1513221441.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:21.576Z,1513221441.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:21.978Z,1513221441.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:22.003Z,1513221442.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:22.401Z,1513221442.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:22.415Z,1513221442.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:22.766Z,1513221442.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:22.806Z,1513221442.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:23.229Z,1513221443.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:23.270Z,1513221443.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:23.576Z,1513221443.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:23.591Z,1513221443.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:23.975Z,1513221443.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:23.989Z,1513221443.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:24.376Z,1513221444.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:24.424Z,1513221444.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:24.771Z,1513221444.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:24.786Z,1513221444.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:25.206Z,1513221445.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:25.230Z,1513221445.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:25.579Z,1513221445.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:25.599Z,1513221445.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:25.976Z,1513221445.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:25.993Z,1513221445.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:26.371Z,1513221446.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:26.386Z,1513221446.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:26.834Z,1513221446.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:26.875Z,1513221446.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:27.172Z,1513221447.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:27.218Z,1513221447.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:27.563Z,1513221447.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:27.578Z,1513221447.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:27.978Z,1513221447.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:28.004Z,1513221448.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:28.390Z,1513221448.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:28.409Z,1513221448.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:28.853Z,1513221448.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:28.868Z,1513221448.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:29.176Z,1513221449.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:29.223Z,1513221449.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:29.585Z,1513221449.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:29.621Z,1513221449.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:29.969Z,1513221449.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:29.983Z,1513221449.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:30.373Z,1513221450.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:30.389Z,1513221450.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:30.778Z,1513221450.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:30.829Z,1513221450.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:31.178Z,1513221451.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:31.201Z,1513221451.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:31.586Z,1513221451.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:31.608Z,1513221451.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:31.986Z,1513221451.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:32.034Z,1513221452.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:32.360Z,1513221452.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:32.388Z,1513221452.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:32.802Z,1513221452.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:32.855Z,1513221452.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:33.167Z,1513221453.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:33.199Z,1513221453.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:33.559Z,1513221453.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:33.586Z,1513221453.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:33.986Z,1513221453.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:34.001Z,1513221454.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:34.384Z,1513221454.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:34.398Z,1513221454.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:34.787Z,1513221454.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:34.882Z,1513221454.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:35.164Z,1513221455.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:35.206Z,1513221455.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:35.564Z,1513221455.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:35.578Z,1513221455.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:35.964Z,1513221455.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:35.978Z,1513221455.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:36.370Z,1513221456.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:36.434Z,1513221456.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:36.770Z,1513221456.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:36.785Z,1513221456.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:37.226Z,1513221457.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:37.241Z,1513221457.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:37.577Z,1513221457.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:37.631Z,1513221457.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:37.976Z,1513221457.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:37.992Z,1513221457.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:38.367Z,1513221458.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:38.408Z,1513221458.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:38.774Z,1513221458.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:38.789Z,1513221458.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:39.217Z,1513221459.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:39.264Z,1513221459.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:39.569Z,1513221459.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:39.584Z,1513221459.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:39.982Z,1513221459.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:39.996Z,1513221459.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:40.374Z,1513221460.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:40.389Z,1513221460.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:40.796Z,1513221460.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:40.856Z,1513221460.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:41.159Z,1513221461.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:41.190Z,1513221461.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:41.559Z,1513221461.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:41.586Z,1513221461.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:41.963Z,1513221461.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:42.002Z,1513221462.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:42.360Z,1513221462.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:42.376Z,1513221462.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:42.821Z,1513221462.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:42.864Z,1513221462.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:43.168Z,1513221463.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:43.199Z,1513221463.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:43.582Z,1513221463.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:43.604Z,1513221463.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:43.977Z,1513221463.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:44.007Z,1513221464.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:44.360Z,1513221464.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:44.392Z,1513221464.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:44.824Z,1513221464.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:44.856Z,1513221464.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:45.174Z,1513221465.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:45.198Z,1513221465.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:45.600Z,1513221465.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:45.644Z,1513221465.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:45.983Z,1513221465.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:45.998Z,1513221465.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:46.386Z,1513221466.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:46.407Z,1513221466.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:46.799Z,1513221466.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:46.868Z,1513221466.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:47.167Z,1513221467.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:47.194Z,1513221467.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:47.566Z,1513221467.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:47.607Z,1513221467.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:47.963Z,1513221467.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:47.978Z,1513221467.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:48.368Z,1513221468.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:48.383Z,1513221468.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:48.870Z,1513221468.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:48.931Z,1513221468.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:49.176Z,1513221469.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:49.191Z,1513221469.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:49.575Z,1513221469.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:49.595Z,1513221469.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:49.989Z,1513221469.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:50.021Z,1513221470.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:50.362Z,1513221470.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:50.378Z,1513221470.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:50.378Z,1513221470.378 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2017-12-14T03:17:50.378Z,1513221470.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:17:50.380Z,1513221470.380 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:50.380Z,1513221470.380 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2017-12-14T03:17:50.380Z,1513221470.380 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:17:50.382Z,1513221470.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:50.382Z,1513221470.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2017-12-14T03:17:50.382Z,1513221470.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:17:50.395Z,1513221470.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:17:50.396Z,1513221470.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:17:50.396Z,1513221470.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:17:50.776Z,1513221470.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:50.802Z,1513221470.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:17:50.802Z,1513221470.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2017-12-14T03:17:50.802Z,1513221470.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:17:50.802Z,1513221470.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2017-12-14T03:17:50.803Z,1513221470.803 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:17:50.803Z,1513221470.803 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2017-12-14T03:17:51.191Z,1513221471.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:51.237Z,1513221471.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:17:51.238Z,1513221471.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:17:51.238Z,1513221471.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:17:51.238Z,1513221471.238 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:17:51.239Z,1513221471.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:17:51.239Z,1513221471.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:17:51.239Z,1513221471.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:17:51.240Z,1513221471.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:17:51.240Z,1513221471.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:17:51.560Z,1513221471.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:51.584Z,1513221471.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:51.978Z,1513221471.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:52.009Z,1513221472.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:52.398Z,1513221472.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:52.413Z,1513221472.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:52.773Z,1513221472.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:52.800Z,1513221472.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:53.181Z,1513221473.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:53.226Z,1513221473.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:53.559Z,1513221473.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:53.593Z,1513221473.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:53.969Z,1513221473.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:53.991Z,1513221473.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:54.370Z,1513221474.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:54.401Z,1513221474.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:54.804Z,1513221474.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:54.867Z,1513221474.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:55.204Z,1513221475.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:55.236Z,1513221475.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:55.585Z,1513221475.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:55.608Z,1513221475.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:55.978Z,1513221475.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:56.005Z,1513221476.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:56.368Z,1513221476.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:56.391Z,1513221476.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:56.803Z,1513221476.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:56.846Z,1513221476.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:57.168Z,1513221477.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:57.207Z,1513221477.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:57.574Z,1513221477.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:57.631Z,1513221477.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:17:57.986Z,1513221477.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:17:58.007Z,1513221478.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:01.472Z,1513221481.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:01.508Z,1513221481.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:01.666Z,1513221481.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:01.707Z,1513221481.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:01.986Z,1513221481.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:02.001Z,1513221482.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:02.394Z,1513221482.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:02.439Z,1513221482.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:02.787Z,1513221482.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:02.874Z,1513221482.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:03.197Z,1513221483.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:03.220Z,1513221483.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:03.594Z,1513221483.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:03.647Z,1513221483.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:03.999Z,1513221483.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:04.019Z,1513221484.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:04.399Z,1513221484.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:04.448Z,1513221484.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:04.821Z,1513221484.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:04.854Z,1513221484.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:05.192Z,1513221485.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:05.232Z,1513221485.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:05.587Z,1513221485.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:05.620Z,1513221485.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:05.988Z,1513221485.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:06.015Z,1513221486.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:06.383Z,1513221486.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:06.403Z,1513221486.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:06.788Z,1513221486.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:06.807Z,1513221486.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:07.195Z,1513221487.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:07.241Z,1513221487.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:07.597Z,1513221487.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:07.619Z,1513221487.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:08.010Z,1513221488.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:08.050Z,1513221488.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:08.388Z,1513221488.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:08.403Z,1513221488.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:08.835Z,1513221488.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:08.875Z,1513221488.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:09.183Z,1513221489.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:09.218Z,1513221489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:09.583Z,1513221489.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:09.598Z,1513221489.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:09.993Z,1513221489.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:10.025Z,1513221490.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:10.412Z,1513221490.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:10.429Z,1513221490.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:10.853Z,1513221490.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:10.897Z,1513221490.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:11.174Z,1513221491.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:11.216Z,1513221491.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:11.580Z,1513221491.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:11.617Z,1513221491.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:11.979Z,1513221491.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:12.018Z,1513221492.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:12.380Z,1513221492.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:12.404Z,1513221492.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:12.870Z,1513221492.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:12.957Z,1513221492.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:13.193Z,1513221493.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:13.228Z,1513221493.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:13.607Z,1513221493.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:13.631Z,1513221493.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:13.994Z,1513221493.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:14.027Z,1513221494.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:14.418Z,1513221494.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:14.444Z,1513221494.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:14.844Z,1513221494.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:14.883Z,1513221494.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:15.190Z,1513221495.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:15.226Z,1513221495.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:15.585Z,1513221495.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:15.600Z,1513221495.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:15.998Z,1513221495.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:16.033Z,1513221496.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:16.397Z,1513221496.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:16.423Z,1513221496.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:16.794Z,1513221496.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:16.872Z,1513221496.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:17.176Z,1513221497.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:17.203Z,1513221497.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:17.587Z,1513221497.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:17.631Z,1513221497.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:17.979Z,1513221497.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:17.993Z,1513221497.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:18.375Z,1513221498.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:18.395Z,1513221498.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:18.783Z,1513221498.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:18.819Z,1513221498.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:19.199Z,1513221499.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:19.235Z,1513221499.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:19.601Z,1513221499.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:19.628Z,1513221499.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:19.998Z,1513221499.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:20.023Z,1513221500.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:20.387Z,1513221500.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:20.402Z,1513221500.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:20.787Z,1513221500.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:20.856Z,1513221500.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:21.200Z,1513221501.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:21.250Z,1513221501.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:21.585Z,1513221501.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:21.600Z,1513221501.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:21.998Z,1513221501.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:22.026Z,1513221502.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:22.402Z,1513221502.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:22.433Z,1513221502.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:22.855Z,1513221502.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:22.896Z,1513221502.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:23.190Z,1513221503.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:23.207Z,1513221503.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:23.586Z,1513221503.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:23.639Z,1513221503.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:24.033Z,1513221504.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:24.052Z,1513221504.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:24.387Z,1513221504.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:24.409Z,1513221504.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:24.838Z,1513221504.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:24.873Z,1513221504.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:25.196Z,1513221505.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:25.256Z,1513221505.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:25.610Z,1513221505.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:25.631Z,1513221505.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:25.998Z,1513221505.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:26.023Z,1513221506.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:26.384Z,1513221506.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:26.435Z,1513221506.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:26.843Z,1513221506.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:26.888Z,1513221506.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:27.209Z,1513221507.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:27.271Z,1513221507.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:27.590Z,1513221507.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:27.611Z,1513221507.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:28.042Z,1513221508.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:28.143Z,1513221508.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:28.405Z,1513221508.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:28.420Z,1513221508.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:28.851Z,1513221508.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:28.873Z,1513221508.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:29.201Z,1513221509.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:29.255Z,1513221509.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:29.586Z,1513221509.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:29.600Z,1513221509.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:29.987Z,1513221509.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:30.001Z,1513221510.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:30.379Z,1513221510.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:30.447Z,1513221510.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:30.789Z,1513221510.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:30.868Z,1513221510.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:31.205Z,1513221511.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:31.219Z,1513221511.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:31.606Z,1513221511.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:31.620Z,1513221511.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:32.001Z,1513221512.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:32.016Z,1513221512.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:32.393Z,1513221512.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:32.408Z,1513221512.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:32.778Z,1513221512.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:32.808Z,1513221512.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:33.198Z,1513221513.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:33.213Z,1513221513.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:33.606Z,1513221513.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:33.658Z,1513221513.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:33.994Z,1513221513.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:34.008Z,1513221514.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:34.394Z,1513221514.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:34.408Z,1513221514.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:34.797Z,1513221514.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:34.819Z,1513221514.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:35.202Z,1513221515.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:35.217Z,1513221515.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:35.586Z,1513221515.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:35.639Z,1513221515.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:35.988Z,1513221515.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:36.003Z,1513221516.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:36.390Z,1513221516.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:36.418Z,1513221516.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:36.840Z,1513221516.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:36.890Z,1513221516.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:37.196Z,1513221517.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:37.238Z,1513221517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:37.602Z,1513221517.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:37.632Z,1513221517.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:37.998Z,1513221517.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:38.022Z,1513221518.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:38.384Z,1513221518.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:38.399Z,1513221518.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:38.820Z,1513221518.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:38.897Z,1513221518.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:39.189Z,1513221519.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:39.203Z,1513221519.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:39.586Z,1513221519.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:39.612Z,1513221519.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:39.996Z,1513221519.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:40.016Z,1513221520.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:40.404Z,1513221520.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:40.424Z,1513221520.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:40.859Z,1513221520.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:40.878Z,1513221520.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:41.176Z,1513221521.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:41.199Z,1513221521.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:41.579Z,1513221521.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:41.610Z,1513221521.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:41.983Z,1513221521.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:42.018Z,1513221522.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:42.385Z,1513221522.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:42.416Z,1513221522.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:42.838Z,1513221522.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:42.870Z,1513221522.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:43.206Z,1513221523.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:43.247Z,1513221523.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:43.605Z,1513221523.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:43.635Z,1513221523.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:44.005Z,1513221524.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:44.020Z,1513221524.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:44.383Z,1513221524.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:44.411Z,1513221524.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:44.797Z,1513221524.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:44.932Z,1513221524.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:45.184Z,1513221525.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:45.214Z,1513221525.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:45.579Z,1513221525.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:45.627Z,1513221525.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:46.005Z,1513221526.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:46.047Z,1513221526.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:46.398Z,1513221526.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:46.420Z,1513221526.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:46.794Z,1513221526.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:46.819Z,1513221526.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:47.186Z,1513221527.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:47.231Z,1513221527.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:47.587Z,1513221527.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:47.628Z,1513221527.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:47.987Z,1513221527.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:48.001Z,1513221528.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:48.384Z,1513221528.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:48.412Z,1513221528.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:48.789Z,1513221528.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:48.803Z,1513221528.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:49.216Z,1513221529.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:49.246Z,1513221529.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:49.594Z,1513221529.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:49.610Z,1513221529.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:49.989Z,1513221529.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:50.008Z,1513221530.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:50.388Z,1513221530.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:50.403Z,1513221530.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:50.827Z,1513221530.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:50.852Z,1513221530.852 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:18:50.852Z,1513221530.852 [BPC1] Communications Fault, FailCount= 1
2017-12-14T03:18:50.852Z,1513221530.852 [BPC1](ERROR): Communications Fault
2017-12-14T03:18:50.895Z,1513221530.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:50.926Z,1513221530.926 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:18:51.193Z,1513221531.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:51.211Z,1513221531.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:51.580Z,1513221531.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:51.608Z,1513221531.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:52.002Z,1513221532.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:52.017Z,1513221532.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:52.031Z,1513221532.031 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:18:52.031Z,1513221532.031 [BPC1] No Fault, FailCount= 1
2017-12-14T03:18:52.402Z,1513221532.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:52.464Z,1513221532.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:52.854Z,1513221532.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:52.869Z,1513221532.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:53.179Z,1513221533.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:53.219Z,1513221533.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:53.580Z,1513221533.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:53.616Z,1513221533.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:53.980Z,1513221533.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:54.018Z,1513221534.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:54.374Z,1513221534.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:54.390Z,1513221534.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:54.836Z,1513221534.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:54.879Z,1513221534.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:55.199Z,1513221535.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:55.232Z,1513221535.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:55.598Z,1513221535.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:55.620Z,1513221535.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:55.997Z,1513221535.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:56.086Z,1513221536.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:56.385Z,1513221536.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:56.427Z,1513221536.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:56.827Z,1513221536.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:56.863Z,1513221536.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:57.185Z,1513221537.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:57.203Z,1513221537.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:57.588Z,1513221537.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:57.611Z,1513221537.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:18:58.002Z,1513221538.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:18:58.033Z,1513221538.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:01.531Z,1513221541.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:01.576Z,1513221541.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:01.591Z,1513221541.591 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:19:01.691Z,1513221541.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:01.731Z,1513221541.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:02.035Z,1513221542.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:02.071Z,1513221542.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:02.473Z,1513221542.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:02.531Z,1513221542.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:02.831Z,1513221542.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:02.872Z,1513221542.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:03.236Z,1513221543.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:03.256Z,1513221543.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:03.632Z,1513221543.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:03.661Z,1513221543.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:04.036Z,1513221544.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:04.055Z,1513221544.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:04.442Z,1513221544.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:04.457Z,1513221544.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:04.858Z,1513221544.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:04.888Z,1513221544.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:05.242Z,1513221545.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:05.256Z,1513221545.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:05.662Z,1513221545.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:05.700Z,1513221545.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:06.045Z,1513221546.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:06.059Z,1513221546.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:06.420Z,1513221546.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:06.455Z,1513221546.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:06.856Z,1513221546.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:06.874Z,1513221546.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:07.248Z,1513221547.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:07.263Z,1513221547.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:07.644Z,1513221547.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:07.659Z,1513221547.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:08.027Z,1513221548.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:08.053Z,1513221548.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:08.424Z,1513221548.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:08.451Z,1513221548.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:08.874Z,1513221548.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:08.923Z,1513221548.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:09.231Z,1513221549.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:09.275Z,1513221549.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:09.623Z,1513221549.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:09.656Z,1513221549.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:10.034Z,1513221550.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:10.072Z,1513221550.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:10.450Z,1513221550.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:10.466Z,1513221550.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:10.850Z,1513221550.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:10.866Z,1513221550.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:11.228Z,1513221551.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:11.236Z,1513221551.236 [BPC1](ERROR): Failed to parse message.
2017-12-14T03:19:11.236Z,1513221551.236 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:19:11.236Z,1513221551.236 [BPC1] Data Fault, FailCount= 2
2017-12-14T03:19:11.236Z,1513221551.236 [BPC1](ERROR): Data Fault
2017-12-14T03:19:11.267Z,1513221551.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:11.303Z,1513221551.303 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:19:11.636Z,1513221551.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:11.661Z,1513221551.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:12.092Z,1513221552.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:12.112Z,1513221552.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:12.430Z,1513221552.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:12.456Z,1513221552.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:12.470Z,1513221552.470 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:19:12.470Z,1513221552.470 [BPC1] No Fault, FailCount= 2
2017-12-14T03:19:12.925Z,1513221552.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:13.011Z,1513221553.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:13.256Z,1513221553.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:13.291Z,1513221553.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:13.642Z,1513221553.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:13.671Z,1513221553.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:14.029Z,1513221554.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:14.043Z,1513221554.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:14.431Z,1513221554.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:14.463Z,1513221554.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:14.831Z,1513221554.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:14.865Z,1513221554.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:15.257Z,1513221555.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:15.292Z,1513221555.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:15.632Z,1513221555.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:15.648Z,1513221555.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:16.041Z,1513221556.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:16.072Z,1513221556.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:16.437Z,1513221556.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:16.451Z,1513221556.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:16.838Z,1513221556.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:16.852Z,1513221556.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:17.236Z,1513221557.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:17.250Z,1513221557.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:17.636Z,1513221557.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:17.651Z,1513221557.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:18.031Z,1513221558.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:18.052Z,1513221558.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:18.461Z,1513221558.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:18.495Z,1513221558.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:18.848Z,1513221558.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:18.872Z,1513221558.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:19.238Z,1513221559.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:19.268Z,1513221559.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:19.646Z,1513221559.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:19.666Z,1513221559.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:20.045Z,1513221560.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:20.059Z,1513221560.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:20.420Z,1513221560.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:20.445Z,1513221560.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:20.858Z,1513221560.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:20.875Z,1513221560.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:21.230Z,1513221561.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:21.302Z,1513221561.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:21.649Z,1513221561.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:21.677Z,1513221561.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:22.034Z,1513221562.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:22.064Z,1513221562.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:22.442Z,1513221562.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:22.467Z,1513221562.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:22.870Z,1513221562.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:22.885Z,1513221562.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:23.235Z,1513221563.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:23.259Z,1513221563.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:23.631Z,1513221563.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:23.671Z,1513221563.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:24.034Z,1513221564.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:24.049Z,1513221564.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:24.430Z,1513221564.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:24.453Z,1513221564.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:24.901Z,1513221564.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:24.940Z,1513221564.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:25.254Z,1513221565.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:25.284Z,1513221565.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:25.638Z,1513221565.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:25.659Z,1513221565.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:26.036Z,1513221566.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:26.050Z,1513221566.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:26.431Z,1513221566.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:26.445Z,1513221566.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:26.894Z,1513221566.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:26.939Z,1513221566.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:27.223Z,1513221567.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:27.255Z,1513221567.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:27.651Z,1513221567.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:27.667Z,1513221567.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:28.090Z,1513221568.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:28.122Z,1513221568.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:28.443Z,1513221568.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:28.475Z,1513221568.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:28.825Z,1513221568.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:28.857Z,1513221568.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:29.229Z,1513221569.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:29.256Z,1513221569.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:29.623Z,1513221569.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:29.661Z,1513221569.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:30.043Z,1513221570.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:30.072Z,1513221570.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:30.450Z,1513221570.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:30.466Z,1513221570.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:30.844Z,1513221570.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:30.882Z,1513221570.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:31.224Z,1513221571.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:31.300Z,1513221571.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:31.639Z,1513221571.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:31.663Z,1513221571.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:32.028Z,1513221572.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:32.065Z,1513221572.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:32.427Z,1513221572.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:32.441Z,1513221572.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:32.848Z,1513221572.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:32.873Z,1513221572.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:33.241Z,1513221573.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:33.299Z,1513221573.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:33.642Z,1513221573.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:33.674Z,1513221573.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:34.031Z,1513221574.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:34.099Z,1513221574.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:34.467Z,1513221574.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:34.521Z,1513221574.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:34.849Z,1513221574.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:34.874Z,1513221574.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:35.228Z,1513221575.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:35.255Z,1513221575.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:35.630Z,1513221575.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:35.656Z,1513221575.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:36.045Z,1513221576.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:36.059Z,1513221576.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:36.454Z,1513221576.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:36.476Z,1513221576.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:36.858Z,1513221576.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:36.882Z,1513221576.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:37.230Z,1513221577.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:37.248Z,1513221577.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:37.640Z,1513221577.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:37.690Z,1513221577.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:38.024Z,1513221578.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:38.059Z,1513221578.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:38.417Z,1513221578.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:38.444Z,1513221578.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:38.859Z,1513221578.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:38.879Z,1513221578.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:39.243Z,1513221579.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:39.263Z,1513221579.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:39.645Z,1513221579.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:39.659Z,1513221579.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:40.023Z,1513221580.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:40.059Z,1513221580.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:40.423Z,1513221580.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:40.458Z,1513221580.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:40.898Z,1513221580.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:40.938Z,1513221580.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:41.243Z,1513221581.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:41.275Z,1513221581.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:41.627Z,1513221581.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:41.652Z,1513221581.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:42.042Z,1513221582.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:42.056Z,1513221582.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:42.447Z,1513221582.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:42.502Z,1513221582.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:42.843Z,1513221582.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:42.863Z,1513221582.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:43.223Z,1513221583.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:43.251Z,1513221583.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:43.623Z,1513221583.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:43.655Z,1513221583.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:44.023Z,1513221584.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:44.048Z,1513221584.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:44.423Z,1513221584.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:44.450Z,1513221584.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:44.849Z,1513221584.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:44.864Z,1513221584.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:45.251Z,1513221585.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:45.267Z,1513221585.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:45.643Z,1513221585.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:45.663Z,1513221585.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:46.028Z,1513221586.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:46.043Z,1513221586.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:46.430Z,1513221586.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:46.445Z,1513221586.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:46.859Z,1513221586.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:46.874Z,1513221586.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:47.279Z,1513221587.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:47.351Z,1513221587.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:47.627Z,1513221587.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:47.652Z,1513221587.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:48.038Z,1513221588.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:48.052Z,1513221588.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:48.438Z,1513221588.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:48.453Z,1513221588.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:48.854Z,1513221588.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:48.892Z,1513221588.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:49.231Z,1513221589.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:49.254Z,1513221589.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:49.637Z,1513221589.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:49.652Z,1513221589.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:50.036Z,1513221590.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:50.052Z,1513221590.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:50.431Z,1513221590.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:50.503Z,1513221590.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:50.856Z,1513221590.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:50.874Z,1513221590.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:51.250Z,1513221591.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:51.268Z,1513221591.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:51.654Z,1513221591.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:51.675Z,1513221591.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:52.028Z,1513221592.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:52.054Z,1513221592.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:52.423Z,1513221592.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:52.455Z,1513221592.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:52.848Z,1513221592.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:52.877Z,1513221592.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:53.224Z,1513221593.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:53.297Z,1513221593.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:53.631Z,1513221593.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:53.663Z,1513221593.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:54.051Z,1513221594.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:54.066Z,1513221594.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:54.448Z,1513221594.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:54.467Z,1513221594.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:54.895Z,1513221594.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:54.958Z,1513221594.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:55.224Z,1513221595.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:55.260Z,1513221595.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:55.623Z,1513221595.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:55.676Z,1513221595.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:56.024Z,1513221596.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:56.059Z,1513221596.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:56.423Z,1513221596.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:56.460Z,1513221596.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:56.848Z,1513221596.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:56.872Z,1513221596.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:57.270Z,1513221597.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:57.284Z,1513221597.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:57.287Z,1513221597.287 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T03:19:57.287Z,1513221597.287 [Default:CheckIn:C.Wait] Stopped
2017-12-14T03:19:57.288Z,1513221597.288 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T03:19:57.288Z,1513221597.288 [Default:CheckIn:D] Running Loop=1
2017-12-14T03:19:57.641Z,1513221597.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:57.666Z,1513221597.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:57.669Z,1513221597.669 [Default:CheckIn:D] Stopped
2017-12-14T03:19:57.669Z,1513221597.669 [Default:CheckIn:E] Running Loop=1
2017-12-14T03:19:58.028Z,1513221598.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:19:58.063Z,1513221598.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:19:58.071Z,1513221598.071 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 166.704655 min 
2017-12-14T03:19:58.071Z,1513221598.071 [Default:CheckIn:E] Stopped
2017-12-14T03:19:58.071Z,1513221598.071 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T03:19:58.071Z,1513221598.071 [Default:CheckIn] Stopped
2017-12-14T03:19:58.071Z,1513221598.071 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T03:19:58.072Z,1513221598.072 [Default:CheckIn](INFO): Running loop #17
2017-12-14T03:19:58.072Z,1513221598.072 [Default:CheckIn] Running Loop=17
2017-12-14T03:19:58.072Z,1513221598.072 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T03:19:58.072Z,1513221598.072 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T03:20:01.577Z,1513221601.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:01.592Z,1513221601.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:01.693Z,1513221601.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:01.712Z,1513221601.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:02.086Z,1513221602.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:02.126Z,1513221602.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:02.499Z,1513221602.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:02.525Z,1513221602.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:02.883Z,1513221602.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:02.930Z,1513221602.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:03.294Z,1513221603.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:03.330Z,1513221603.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:03.682Z,1513221603.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:03.743Z,1513221603.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:04.086Z,1513221604.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:04.108Z,1513221604.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:04.486Z,1513221604.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:04.508Z,1513221604.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:04.892Z,1513221604.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:04.907Z,1513221604.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:05.290Z,1513221605.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:05.334Z,1513221605.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:05.686Z,1513221605.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:05.710Z,1513221605.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:06.088Z,1513221606.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:06.108Z,1513221606.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:06.487Z,1513221606.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:06.527Z,1513221606.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:06.891Z,1513221606.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:06.934Z,1513221606.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:07.291Z,1513221607.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:07.326Z,1513221607.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:07.685Z,1513221607.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:07.726Z,1513221607.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:08.076Z,1513221608.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:08.119Z,1513221608.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:08.476Z,1513221608.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:08.519Z,1513221608.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:08.914Z,1513221608.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:08.951Z,1513221608.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:09.276Z,1513221609.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:09.315Z,1513221609.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:09.761Z,1513221609.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:09.780Z,1513221609.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:10.102Z,1513221610.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:10.124Z,1513221610.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:10.494Z,1513221610.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:10.526Z,1513221610.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:10.875Z,1513221610.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:10.919Z,1513221610.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:11.272Z,1513221611.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:11.318Z,1513221611.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:11.676Z,1513221611.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:11.691Z,1513221611.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:12.093Z,1513221612.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:12.127Z,1513221612.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:12.487Z,1513221612.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:12.519Z,1513221612.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:12.921Z,1513221612.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:12.944Z,1513221612.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:13.282Z,1513221613.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:13.334Z,1513221613.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:13.681Z,1513221613.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:13.724Z,1513221613.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:14.080Z,1513221614.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:14.108Z,1513221614.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:14.483Z,1513221614.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:14.546Z,1513221614.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:14.882Z,1513221614.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:14.928Z,1513221614.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:15.293Z,1513221615.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:15.324Z,1513221615.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:15.686Z,1513221615.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:15.720Z,1513221615.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:16.118Z,1513221616.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:16.195Z,1513221616.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:16.490Z,1513221616.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:16.528Z,1513221616.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:16.882Z,1513221616.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:16.936Z,1513221616.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:17.283Z,1513221617.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:17.306Z,1513221617.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:17.693Z,1513221617.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:17.739Z,1513221617.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:18.090Z,1513221618.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:18.133Z,1513221618.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:18.486Z,1513221618.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:18.520Z,1513221618.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:18.896Z,1513221618.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:18.912Z,1513221618.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:19.274Z,1513221619.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:19.328Z,1513221619.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:19.692Z,1513221619.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:19.723Z,1513221619.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:20.099Z,1513221620.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:20.119Z,1513221620.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:20.500Z,1513221620.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:20.514Z,1513221620.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:20.871Z,1513221620.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:20.910Z,1513221620.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:21.276Z,1513221621.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:21.321Z,1513221621.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:21.676Z,1513221621.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:21.709Z,1513221621.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:22.102Z,1513221622.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:22.117Z,1513221622.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:22.524Z,1513221622.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:22.559Z,1513221622.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:22.903Z,1513221622.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:22.926Z,1513221622.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:23.271Z,1513221623.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:23.309Z,1513221623.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:23.679Z,1513221623.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:23.714Z,1513221623.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:24.072Z,1513221624.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:24.106Z,1513221624.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:24.468Z,1513221624.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:24.518Z,1513221624.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:24.894Z,1513221624.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:24.917Z,1513221624.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:25.312Z,1513221625.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:25.328Z,1513221625.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:25.701Z,1513221625.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:25.732Z,1513221625.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:26.087Z,1513221626.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:26.155Z,1513221626.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:26.468Z,1513221626.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:26.484Z,1513221626.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:26.877Z,1513221626.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:26.917Z,1513221626.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:27.289Z,1513221627.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:27.317Z,1513221627.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:27.693Z,1513221627.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:27.739Z,1513221627.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:28.093Z,1513221628.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:28.116Z,1513221628.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x1581 got:0x16701
2017-12-14T03:20:28.144Z,1513221628.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:28.494Z,1513221628.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:28.520Z,1513221628.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:28.871Z,1513221628.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:28.894Z,1513221628.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:29.282Z,1513221629.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:29.334Z,1513221629.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:29.676Z,1513221629.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:29.695Z,1513221629.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:30.098Z,1513221630.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:30.122Z,1513221630.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:30.495Z,1513221630.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:30.521Z,1513221630.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:30.898Z,1513221630.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:30.976Z,1513221630.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:31.278Z,1513221631.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:31.293Z,1513221631.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:31.672Z,1513221631.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:31.709Z,1513221631.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:32.108Z,1513221632.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:32.150Z,1513221632.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:32.479Z,1513221632.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:32.503Z,1513221632.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:32.889Z,1513221632.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:32.912Z,1513221632.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:33.292Z,1513221633.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:33.310Z,1513221633.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:33.693Z,1513221633.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:33.708Z,1513221633.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:34.083Z,1513221634.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:34.130Z,1513221634.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:34.479Z,1513221634.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:34.494Z,1513221634.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:34.882Z,1513221634.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:34.911Z,1513221634.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:35.292Z,1513221635.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:35.341Z,1513221635.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:35.687Z,1513221635.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:35.722Z,1513221635.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:36.104Z,1513221636.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:36.120Z,1513221636.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:36.502Z,1513221636.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:36.523Z,1513221636.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:36.914Z,1513221636.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:36.938Z,1513221636.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:37.271Z,1513221637.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:37.327Z,1513221637.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:37.671Z,1513221637.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:37.716Z,1513221637.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:38.084Z,1513221638.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:38.164Z,1513221638.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:38.490Z,1513221638.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:38.570Z,1513221638.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:38.891Z,1513221638.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:38.958Z,1513221638.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:39.316Z,1513221639.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:39.322Z,1513221639.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T03:20:39.361Z,1513221639.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:39.707Z,1513221639.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:39.760Z,1513221639.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:40.074Z,1513221640.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:40.112Z,1513221640.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:40.475Z,1513221640.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:40.522Z,1513221640.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:40.872Z,1513221640.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:40.887Z,1513221640.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:41.283Z,1513221641.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:41.319Z,1513221641.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:41.712Z,1513221641.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:41.751Z,1513221641.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:42.100Z,1513221642.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:42.131Z,1513221642.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:42.482Z,1513221642.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:42.508Z,1513221642.508 [PNI_TCM](ERROR): CRC does not match. Expected:0x60040 got:0x41592
2017-12-14T03:20:42.543Z,1513221642.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:42.883Z,1513221642.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:42.930Z,1513221642.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:43.271Z,1513221643.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:43.306Z,1513221643.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:43.671Z,1513221643.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:43.719Z,1513221643.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:44.075Z,1513221644.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:44.114Z,1513221644.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:44.472Z,1513221644.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:44.515Z,1513221644.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:44.891Z,1513221644.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:44.929Z,1513221644.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:45.318Z,1513221645.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:45.339Z,1513221645.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:45.693Z,1513221645.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:45.727Z,1513221645.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:46.074Z,1513221646.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:46.116Z,1513221646.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:46.479Z,1513221646.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:46.497Z,1513221646.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:46.878Z,1513221646.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:46.904Z,1513221646.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:47.289Z,1513221647.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:47.356Z,1513221647.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:47.701Z,1513221647.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:47.727Z,1513221647.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:48.104Z,1513221648.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:48.178Z,1513221648.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:48.482Z,1513221648.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:48.526Z,1513221648.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:48.876Z,1513221648.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:48.918Z,1513221648.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:49.281Z,1513221649.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:49.304Z,1513221649.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:49.685Z,1513221649.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:49.700Z,1513221649.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:50.085Z,1513221650.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:50.126Z,1513221650.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:50.486Z,1513221650.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:50.507Z,1513221650.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:50.910Z,1513221650.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:50.939Z,1513221650.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:51.298Z,1513221651.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:51.342Z,1513221651.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:51.342Z,1513221651.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2017-12-14T03:20:51.342Z,1513221651.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:20:51.344Z,1513221651.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:51.344Z,1513221651.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2017-12-14T03:20:51.344Z,1513221651.344 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:20:51.354Z,1513221651.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:51.354Z,1513221651.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2017-12-14T03:20:51.354Z,1513221651.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:20:51.387Z,1513221651.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:20:51.387Z,1513221651.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:20:51.387Z,1513221651.387 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:20:51.702Z,1513221651.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:51.735Z,1513221651.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:20:51.735Z,1513221651.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2017-12-14T03:20:51.736Z,1513221651.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:20:51.736Z,1513221651.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2017-12-14T03:20:51.736Z,1513221651.736 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:20:51.737Z,1513221651.737 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2017-12-14T03:20:52.080Z,1513221652.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:52.125Z,1513221652.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:20:52.126Z,1513221652.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:20:52.126Z,1513221652.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:20:52.126Z,1513221652.126 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:20:52.127Z,1513221652.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:20:52.127Z,1513221652.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:20:52.127Z,1513221652.127 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:20:52.128Z,1513221652.128 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:20:52.128Z,1513221652.128 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:20:52.477Z,1513221652.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:52.513Z,1513221652.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:52.889Z,1513221652.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:52.915Z,1513221652.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:53.290Z,1513221653.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:53.331Z,1513221653.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:53.690Z,1513221653.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:53.800Z,1513221653.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:54.079Z,1513221654.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:54.110Z,1513221654.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:54.472Z,1513221654.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:54.486Z,1513221654.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x42681 got:0x55678
2017-12-14T03:20:54.535Z,1513221654.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:54.889Z,1513221654.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:54.931Z,1513221654.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:55.290Z,1513221655.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:55.322Z,1513221655.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:55.702Z,1513221655.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:55.727Z,1513221655.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:56.084Z,1513221656.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:56.113Z,1513221656.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:56.476Z,1513221656.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:56.520Z,1513221656.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:56.884Z,1513221656.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:56.924Z,1513221656.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:57.276Z,1513221657.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:57.310Z,1513221657.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:57.698Z,1513221657.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:57.768Z,1513221657.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:20:58.102Z,1513221658.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:20:58.133Z,1513221658.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:01.606Z,1513221661.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:01.697Z,1513221661.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:01.792Z,1513221661.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:01.811Z,1513221661.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:02.167Z,1513221662.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:02.199Z,1513221662.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:02.571Z,1513221662.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:02.639Z,1513221662.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:02.964Z,1513221662.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:02.997Z,1513221662.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:03.363Z,1513221663.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:03.410Z,1513221663.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:03.786Z,1513221663.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:03.801Z,1513221663.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:04.185Z,1513221664.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:04.208Z,1513221664.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:04.587Z,1513221664.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:04.601Z,1513221664.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:04.964Z,1513221664.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:04.000Z,1513221665.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:05.367Z,1513221665.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:05.394Z,1513221665.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:05.764Z,1513221665.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:05.837Z,1513221665.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:06.164Z,1513221666.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:06.198Z,1513221666.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:06.567Z,1513221666.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:06.598Z,1513221666.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:06.973Z,1513221666.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:07.008Z,1513221667.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:07.383Z,1513221667.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:07.423Z,1513221667.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:07.782Z,1513221667.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:07.811Z,1513221667.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:08.170Z,1513221668.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:08.208Z,1513221668.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:08.571Z,1513221668.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:08.607Z,1513221668.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:08.972Z,1513221668.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:09.002Z,1513221669.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:09.375Z,1513221669.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:09.408Z,1513221669.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:09.780Z,1513221669.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:09.814Z,1513221669.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:10.174Z,1513221670.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:10.201Z,1513221670.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:10.579Z,1513221670.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:10.625Z,1513221670.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:10.983Z,1513221670.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:11.007Z,1513221671.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:11.367Z,1513221671.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:11.387Z,1513221671.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:11.764Z,1513221671.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:11.829Z,1513221671.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:12.186Z,1513221672.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:12.226Z,1513221672.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:12.577Z,1513221672.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:12.599Z,1513221672.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:12.981Z,1513221672.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:12.997Z,1513221672.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:13.382Z,1513221673.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:13.397Z,1513221673.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:13.784Z,1513221673.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:13.829Z,1513221673.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:14.163Z,1513221674.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:14.197Z,1513221674.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:14.564Z,1513221674.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:14.592Z,1513221674.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:14.963Z,1513221674.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:14.991Z,1513221674.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:15.363Z,1513221675.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:15.390Z,1513221675.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:15.782Z,1513221675.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:15.805Z,1513221675.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:16.183Z,1513221676.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:16.203Z,1513221676.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:16.583Z,1513221676.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:16.603Z,1513221676.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:16.969Z,1513221676.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:17.003Z,1513221677.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:17.364Z,1513221677.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:17.420Z,1513221677.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:17.773Z,1513221677.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:17.799Z,1513221677.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:18.176Z,1513221678.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:18.204Z,1513221678.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:18.571Z,1513221678.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:18.604Z,1513221678.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:18.999Z,1513221678.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:19.014Z,1513221679.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:19.379Z,1513221679.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:19.415Z,1513221679.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:19.784Z,1513221679.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:19.815Z,1513221679.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:20.169Z,1513221680.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:20.187Z,1513221680.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:20.578Z,1513221680.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:20.602Z,1513221680.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:20.991Z,1513221680.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:21.067Z,1513221681.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:21.401Z,1513221681.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:21.451Z,1513221681.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:21.789Z,1513221681.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:21.848Z,1513221681.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:22.190Z,1513221682.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:22.215Z,1513221682.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:22.575Z,1513221682.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:22.615Z,1513221682.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:22.998Z,1513221682.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:23.023Z,1513221683.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:23.397Z,1513221683.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:23.449Z,1513221683.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:23.764Z,1513221683.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:23.876Z,1513221683.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:24.199Z,1513221684.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:24.240Z,1513221684.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:24.575Z,1513221684.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:24.610Z,1513221684.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:24.975Z,1513221684.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:25.049Z,1513221685.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:25.407Z,1513221685.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:25.449Z,1513221685.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:25.780Z,1513221685.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:25.839Z,1513221685.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:26.169Z,1513221686.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:26.199Z,1513221686.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:26.564Z,1513221686.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:26.615Z,1513221686.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:26.964Z,1513221686.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:26.994Z,1513221686.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:27.401Z,1513221687.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:27.436Z,1513221687.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:27.786Z,1513221687.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:27.822Z,1513221687.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:28.197Z,1513221688.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:28.220Z,1513221688.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:28.596Z,1513221688.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:28.615Z,1513221688.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:28.000Z,1513221689.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:29.015Z,1513221689.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:29.376Z,1513221689.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:29.414Z,1513221689.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:29.802Z,1513221689.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:29.817Z,1513221689.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:30.169Z,1513221690.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:30.183Z,1513221690.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:30.571Z,1513221690.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:30.591Z,1513221690.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:31.040Z,1513221691.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:31.079Z,1513221691.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:31.389Z,1513221691.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:31.435Z,1513221691.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:31.784Z,1513221691.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:31.841Z,1513221691.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:32.168Z,1513221692.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:32.235Z,1513221692.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:32.565Z,1513221692.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:32.615Z,1513221692.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:32.978Z,1513221692.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:33.038Z,1513221693.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:33.392Z,1513221693.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:33.453Z,1513221693.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:33.789Z,1513221693.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:33.827Z,1513221693.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:34.188Z,1513221694.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:34.251Z,1513221694.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:34.591Z,1513221694.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:34.635Z,1513221694.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:34.978Z,1513221694.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:35.024Z,1513221695.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:35.389Z,1513221695.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:35.432Z,1513221695.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:35.773Z,1513221695.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:35.801Z,1513221695.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:36.165Z,1513221696.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:36.238Z,1513221696.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:36.565Z,1513221696.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:36.599Z,1513221696.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:36.984Z,1513221696.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:37.037Z,1513221697.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:37.396Z,1513221697.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:37.420Z,1513221697.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:37.780Z,1513221697.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:37.823Z,1513221697.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:38.176Z,1513221698.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:38.242Z,1513221698.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:38.570Z,1513221698.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:38.585Z,1513221698.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:38.974Z,1513221698.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:38.989Z,1513221698.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:39.372Z,1513221699.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:39.387Z,1513221699.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:39.777Z,1513221699.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:39.792Z,1513221699.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:40.185Z,1513221700.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:40.216Z,1513221700.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:40.586Z,1513221700.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:40.620Z,1513221700.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:40.979Z,1513221700.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:41.030Z,1513221701.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:41.369Z,1513221701.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:41.392Z,1513221701.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:41.776Z,1513221701.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:41.791Z,1513221701.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:42.177Z,1513221702.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:42.191Z,1513221702.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:42.569Z,1513221702.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:42.588Z,1513221702.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:42.994Z,1513221702.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:43.023Z,1513221703.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:43.379Z,1513221703.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:43.396Z,1513221703.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:43.786Z,1513221703.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:43.800Z,1513221703.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:44.199Z,1513221704.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:44.231Z,1513221704.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:44.563Z,1513221704.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:44.605Z,1513221704.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:44.964Z,1513221704.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:44.992Z,1513221704.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:45.363Z,1513221705.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:45.395Z,1513221705.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:45.786Z,1513221705.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:45.801Z,1513221705.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:46.190Z,1513221706.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:46.254Z,1513221706.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:46.587Z,1513221706.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:46.620Z,1513221706.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:46.964Z,1513221706.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:46.999Z,1513221706.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:47.401Z,1513221707.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:47.432Z,1513221707.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:47.772Z,1513221707.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:47.831Z,1513221707.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:48.170Z,1513221708.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:48.185Z,1513221708.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:48.571Z,1513221708.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:48.631Z,1513221708.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:48.982Z,1513221708.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:49.012Z,1513221709.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:49.390Z,1513221709.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:49.413Z,1513221709.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:49.786Z,1513221709.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:49.821Z,1513221709.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:50.176Z,1513221710.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:50.191Z,1513221710.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:50.607Z,1513221710.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:50.671Z,1513221710.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:50.977Z,1513221710.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:50.992Z,1513221710.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:51.371Z,1513221711.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:51.395Z,1513221711.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:51.782Z,1513221711.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:51.797Z,1513221711.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:52.182Z,1513221712.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:52.198Z,1513221712.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:52.580Z,1513221712.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:52.595Z,1513221712.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:52.973Z,1513221712.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:52.995Z,1513221712.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:53.367Z,1513221713.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:53.403Z,1513221713.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:53.806Z,1513221713.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:53.839Z,1513221713.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:54.163Z,1513221714.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:54.198Z,1513221714.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:54.577Z,1513221714.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:54.596Z,1513221714.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:54.983Z,1513221714.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:54.998Z,1513221714.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:55.391Z,1513221715.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:55.411Z,1513221715.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:55.774Z,1513221715.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:55.801Z,1513221715.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:56.167Z,1513221716.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:56.201Z,1513221716.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:56.563Z,1513221716.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:56.589Z,1513221716.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:56.000Z,1513221717.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:57.051Z,1513221717.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:57.363Z,1513221717.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:57.403Z,1513221717.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:57.793Z,1513221717.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:57.807Z,1513221717.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:21:58.179Z,1513221718.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:21:58.215Z,1513221718.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:01.760Z,1513221721.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:01.775Z,1513221721.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:01.868Z,1513221721.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:01.907Z,1513221721.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:02.261Z,1513221722.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:02.275Z,1513221722.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:02.666Z,1513221722.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:02.680Z,1513221722.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:03.058Z,1513221723.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:03.138Z,1513221723.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:03.452Z,1513221723.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:03.491Z,1513221723.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:03.875Z,1513221723.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:03.891Z,1513221723.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:04.274Z,1513221724.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:04.293Z,1513221724.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:04.662Z,1513221724.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:04.697Z,1513221724.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:05.060Z,1513221725.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:05.159Z,1513221725.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:05.452Z,1513221725.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:05.468Z,1513221725.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:05.855Z,1513221725.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:05.894Z,1513221725.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:06.252Z,1513221726.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:06.271Z,1513221726.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:06.667Z,1513221726.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:06.697Z,1513221726.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:07.074Z,1513221727.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:07.097Z,1513221727.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:07.478Z,1513221727.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:07.504Z,1513221727.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:07.874Z,1513221727.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:07.899Z,1513221727.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:08.256Z,1513221728.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:08.283Z,1513221728.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:08.659Z,1513221728.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:08.679Z,1513221728.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:09.060Z,1513221729.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:09.147Z,1513221729.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:09.472Z,1513221729.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:09.510Z,1513221729.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:09.874Z,1513221729.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:09.922Z,1513221729.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:10.274Z,1513221730.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:10.289Z,1513221730.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:10.675Z,1513221730.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:10.734Z,1513221730.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:11.051Z,1513221731.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:11.076Z,1513221731.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:11.451Z,1513221731.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:11.477Z,1513221731.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:11.868Z,1513221731.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:11.883Z,1513221731.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:12.253Z,1513221732.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:12.287Z,1513221732.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:12.648Z,1513221732.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:12.688Z,1513221732.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:13.089Z,1513221733.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:13.104Z,1513221733.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:13.475Z,1513221733.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:13.489Z,1513221733.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:13.861Z,1513221733.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:13.895Z,1513221733.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:14.255Z,1513221734.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:14.287Z,1513221734.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:14.652Z,1513221734.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:14.688Z,1513221734.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:15.056Z,1513221735.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:15.091Z,1513221735.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:15.451Z,1513221735.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:15.489Z,1513221735.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:15.879Z,1513221735.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:15.940Z,1513221735.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:16.276Z,1513221736.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:16.291Z,1513221736.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:16.675Z,1513221736.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:16.690Z,1513221736.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:17.053Z,1513221737.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:17.087Z,1513221737.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:17.452Z,1513221737.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:17.468Z,1513221737.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:17.857Z,1513221737.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:17.871Z,1513221737.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:18.257Z,1513221738.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:18.271Z,1513221738.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:18.655Z,1513221738.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:18.675Z,1513221738.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:19.081Z,1513221739.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:19.195Z,1513221739.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:19.474Z,1513221739.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:19.495Z,1513221739.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:19.871Z,1513221739.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:19.894Z,1513221739.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:20.251Z,1513221740.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:20.280Z,1513221740.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:20.655Z,1513221740.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:20.681Z,1513221740.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:21.052Z,1513221741.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:21.088Z,1513221741.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:21.455Z,1513221741.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:21.482Z,1513221741.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:21.882Z,1513221741.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:21.946Z,1513221741.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:22.262Z,1513221742.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:22.288Z,1513221742.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:22.661Z,1513221742.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:22.688Z,1513221742.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:23.059Z,1513221743.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:23.088Z,1513221743.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:23.448Z,1513221743.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:23.471Z,1513221743.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:23.861Z,1513221743.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:23.876Z,1513221743.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:24.262Z,1513221744.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:24.276Z,1513221744.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:24.661Z,1513221744.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:24.676Z,1513221744.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:25.061Z,1513221745.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:25.083Z,1513221745.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:25.477Z,1513221745.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:25.519Z,1513221745.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:25.865Z,1513221745.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:25.880Z,1513221745.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:26.260Z,1513221746.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:26.279Z,1513221746.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:26.664Z,1513221746.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:26.678Z,1513221746.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:27.057Z,1513221747.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:27.088Z,1513221747.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:27.459Z,1513221747.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:27.475Z,1513221747.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:27.865Z,1513221747.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:27.882Z,1513221747.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:28.266Z,1513221748.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:28.280Z,1513221748.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:28.706Z,1513221748.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:28.762Z,1513221748.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:29.071Z,1513221749.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:29.087Z,1513221749.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:29.462Z,1513221749.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:29.476Z,1513221749.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:29.855Z,1513221749.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:29.897Z,1513221749.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:30.265Z,1513221750.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:30.292Z,1513221750.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:30.652Z,1513221750.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:30.678Z,1513221750.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:31.077Z,1513221751.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:31.231Z,1513221751.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:31.473Z,1513221751.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:31.499Z,1513221751.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:31.870Z,1513221751.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:31.905Z,1513221751.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:32.276Z,1513221752.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:32.330Z,1513221752.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:32.660Z,1513221752.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:32.675Z,1513221752.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:33.061Z,1513221753.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:33.160Z,1513221753.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:33.451Z,1513221753.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:33.484Z,1513221753.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:33.866Z,1513221753.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:33.893Z,1513221753.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:34.262Z,1513221754.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:34.291Z,1513221754.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:34.661Z,1513221754.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:34.693Z,1513221754.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:35.060Z,1513221755.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:35.098Z,1513221755.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:35.457Z,1513221755.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:35.471Z,1513221755.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:35.855Z,1513221755.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:35.870Z,1513221755.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:36.260Z,1513221756.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:36.274Z,1513221756.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:36.648Z,1513221756.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:36.679Z,1513221756.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:37.074Z,1513221757.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:37.104Z,1513221757.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:37.473Z,1513221757.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:37.505Z,1513221757.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:37.858Z,1513221757.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:37.872Z,1513221757.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:38.281Z,1513221758.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:38.366Z,1513221758.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:38.655Z,1513221758.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:38.669Z,1513221758.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:39.058Z,1513221759.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:39.073Z,1513221759.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:39.460Z,1513221759.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:39.476Z,1513221759.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:39.873Z,1513221759.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:39.905Z,1513221759.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:40.269Z,1513221760.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:40.284Z,1513221760.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:40.673Z,1513221760.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:40.688Z,1513221760.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:41.061Z,1513221761.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:41.083Z,1513221761.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:41.467Z,1513221761.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:41.519Z,1513221761.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:41.863Z,1513221761.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:41.880Z,1513221761.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:42.266Z,1513221762.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:42.290Z,1513221762.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:42.661Z,1513221762.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:42.683Z,1513221762.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:43.070Z,1513221763.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:43.091Z,1513221763.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:43.471Z,1513221763.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:43.491Z,1513221763.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:43.866Z,1513221763.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:43.895Z,1513221763.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:44.258Z,1513221764.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:44.278Z,1513221764.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:44.659Z,1513221764.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:44.675Z,1513221764.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:45.052Z,1513221765.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:45.083Z,1513221765.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:45.451Z,1513221765.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:45.488Z,1513221765.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:45.874Z,1513221765.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:45.902Z,1513221765.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:46.262Z,1513221766.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:46.300Z,1513221766.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:46.676Z,1513221766.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:46.692Z,1513221766.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:47.051Z,1513221767.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:47.115Z,1513221767.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:47.455Z,1513221767.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:47.475Z,1513221767.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:47.896Z,1513221767.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:47.919Z,1513221767.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:48.259Z,1513221768.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:48.276Z,1513221768.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:48.660Z,1513221768.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:48.679Z,1513221768.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:49.061Z,1513221769.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:49.083Z,1513221769.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:49.473Z,1513221769.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:49.488Z,1513221769.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:49.874Z,1513221769.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:49.888Z,1513221769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:50.261Z,1513221770.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:50.283Z,1513221770.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:50.660Z,1513221770.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:50.675Z,1513221770.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:51.087Z,1513221771.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:51.125Z,1513221771.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:51.461Z,1513221771.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:51.476Z,1513221771.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:51.869Z,1513221771.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:51.907Z,1513221771.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:52.270Z,1513221772.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:52.285Z,1513221772.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:52.667Z,1513221772.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:52.681Z,1513221772.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:53.060Z,1513221773.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:53.076Z,1513221773.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:53.459Z,1513221773.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:53.519Z,1513221773.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:53.857Z,1513221773.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:53.892Z,1513221773.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:54.306Z,1513221774.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:54.338Z,1513221774.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:54.652Z,1513221774.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:54.687Z,1513221774.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:55.072Z,1513221775.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:55.127Z,1513221775.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:55.472Z,1513221775.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:55.499Z,1513221775.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:55.866Z,1513221775.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:55.921Z,1513221775.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:56.251Z,1513221776.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:56.278Z,1513221776.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:56.656Z,1513221776.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:56.686Z,1513221776.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:57.059Z,1513221777.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:57.091Z,1513221777.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:57.451Z,1513221777.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:57.480Z,1513221777.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:57.895Z,1513221777.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:57.936Z,1513221777.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:22:58.265Z,1513221778.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:22:58.293Z,1513221778.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:01.910Z,1513221781.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:01.936Z,1513221781.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:02.039Z,1513221782.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:02.095Z,1513221782.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:02.395Z,1513221782.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:02.415Z,1513221782.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:02.849Z,1513221782.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:02.892Z,1513221782.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:03.188Z,1513221783.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:03.215Z,1513221783.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:03.595Z,1513221783.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:03.619Z,1513221783.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:04.001Z,1513221784.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:04.047Z,1513221784.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:04.405Z,1513221784.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:04.424Z,1513221784.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:04.842Z,1513221784.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:04.880Z,1513221784.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:05.203Z,1513221785.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:05.222Z,1513221785.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:05.602Z,1513221785.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:05.618Z,1513221785.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:05.983Z,1513221785.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:06.010Z,1513221786.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:06.397Z,1513221786.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:06.412Z,1513221786.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:06.841Z,1513221786.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:06.868Z,1513221786.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:07.216Z,1513221787.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:07.235Z,1513221787.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:07.635Z,1513221787.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:07.683Z,1513221787.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:08.004Z,1513221788.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:08.027Z,1513221788.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:08.383Z,1513221788.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:08.411Z,1513221788.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:08.849Z,1513221788.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:08.868Z,1513221788.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:09.184Z,1513221789.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:09.230Z,1513221789.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:09.584Z,1513221789.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:09.619Z,1513221789.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:10.051Z,1513221790.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:10.077Z,1513221790.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:10.398Z,1513221790.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:10.420Z,1513221790.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:10.838Z,1513221790.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:10.939Z,1513221790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:11.183Z,1513221791.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:11.224Z,1513221791.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:11.586Z,1513221791.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:11.600Z,1513221791.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:11.992Z,1513221791.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:12.006Z,1513221792.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:12.390Z,1513221792.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:12.406Z,1513221792.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:12.791Z,1513221792.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:12.811Z,1513221792.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:13.221Z,1513221793.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:13.236Z,1513221793.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:13.605Z,1513221793.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:13.634Z,1513221793.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:14.006Z,1513221794.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:14.032Z,1513221794.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:14.393Z,1513221794.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:14.408Z,1513221794.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:14.796Z,1513221794.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:14.810Z,1513221794.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:15.203Z,1513221795.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:15.242Z,1513221795.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:15.597Z,1513221795.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:15.619Z,1513221795.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:16.002Z,1513221796.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:16.090Z,1513221796.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:16.394Z,1513221796.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:16.417Z,1513221796.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:16.841Z,1513221796.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:16.916Z,1513221796.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:17.199Z,1513221797.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:17.251Z,1513221797.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:17.590Z,1513221797.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:17.636Z,1513221797.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:17.991Z,1513221797.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:18.006Z,1513221798.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:18.396Z,1513221798.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:18.411Z,1513221798.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:18.829Z,1513221798.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:18.883Z,1513221798.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:19.205Z,1513221799.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:19.220Z,1513221799.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:19.602Z,1513221799.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:19.617Z,1513221799.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:19.999Z,1513221799.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:20.019Z,1513221800.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:20.424Z,1513221800.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:20.462Z,1513221800.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:20.845Z,1513221800.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:20.868Z,1513221800.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:21.192Z,1513221801.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:21.224Z,1513221801.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:21.597Z,1513221801.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:21.613Z,1513221801.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:22.006Z,1513221802.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:22.024Z,1513221802.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:22.402Z,1513221802.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:22.423Z,1513221802.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:22.837Z,1513221802.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:22.852Z,1513221802.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:23.200Z,1513221803.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:23.224Z,1513221803.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:23.610Z,1513221803.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:23.646Z,1513221803.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:23.983Z,1513221803.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:24.023Z,1513221804.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:24.388Z,1513221804.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:24.425Z,1513221804.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:24.780Z,1513221804.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:24.873Z,1513221804.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:25.210Z,1513221805.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:25.238Z,1513221805.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:25.605Z,1513221805.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:25.641Z,1513221805.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:26.006Z,1513221806.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:26.059Z,1513221806.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:26.393Z,1513221806.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:26.408Z,1513221806.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:26.830Z,1513221806.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:26.897Z,1513221806.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:27.207Z,1513221807.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:27.248Z,1513221807.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:27.594Z,1513221807.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:27.610Z,1513221807.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:27.998Z,1513221807.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:28.013Z,1513221808.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:28.406Z,1513221808.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:28.441Z,1513221808.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:28.793Z,1513221808.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:28.816Z,1513221808.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:29.195Z,1513221809.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:29.215Z,1513221809.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:29.596Z,1513221809.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:29.611Z,1513221809.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:29.993Z,1513221809.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:30.072Z,1513221810.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:30.398Z,1513221810.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:30.413Z,1513221810.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:30.841Z,1513221810.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:30.866Z,1513221810.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:31.207Z,1513221811.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:31.239Z,1513221811.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:31.607Z,1513221811.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:31.622Z,1513221811.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:32.007Z,1513221812.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:32.023Z,1513221812.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:32.399Z,1513221812.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:32.413Z,1513221812.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:32.825Z,1513221812.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:32.868Z,1513221812.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:33.217Z,1513221813.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:33.256Z,1513221813.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:33.603Z,1513221813.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:33.628Z,1513221813.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:34.011Z,1513221814.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:34.026Z,1513221814.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:34.398Z,1513221814.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:34.425Z,1513221814.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:34.831Z,1513221814.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:34.858Z,1513221814.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:35.194Z,1513221815.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:35.217Z,1513221815.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:35.594Z,1513221815.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:35.615Z,1513221815.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:35.994Z,1513221815.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:36.008Z,1513221816.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:36.416Z,1513221816.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:36.454Z,1513221816.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:36.832Z,1513221816.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:36.856Z,1513221816.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:37.202Z,1513221817.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:37.222Z,1513221817.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:37.607Z,1513221817.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:37.691Z,1513221817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:38.002Z,1513221818.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:38.023Z,1513221818.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:38.387Z,1513221818.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:38.454Z,1513221818.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:38.815Z,1513221818.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:38.893Z,1513221818.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:39.192Z,1513221819.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:39.247Z,1513221819.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:39.620Z,1513221819.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:39.655Z,1513221819.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:39.997Z,1513221819.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:40.020Z,1513221820.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:40.402Z,1513221820.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:40.417Z,1513221820.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:40.798Z,1513221820.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:40.812Z,1513221820.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:41.196Z,1513221821.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:41.211Z,1513221821.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:41.591Z,1513221821.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:41.615Z,1513221821.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:41.996Z,1513221821.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:42.010Z,1513221822.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:42.391Z,1513221822.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:42.406Z,1513221822.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:42.824Z,1513221822.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:42.848Z,1513221822.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:43.213Z,1513221823.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:43.254Z,1513221823.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:43.607Z,1513221823.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:43.622Z,1513221823.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:44.006Z,1513221824.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:44.023Z,1513221824.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:44.383Z,1513221824.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:44.417Z,1513221824.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:44.848Z,1513221824.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:44.862Z,1513221824.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:45.202Z,1513221825.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:45.229Z,1513221825.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:45.584Z,1513221825.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:45.619Z,1513221825.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:46.012Z,1513221826.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:46.066Z,1513221826.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:46.409Z,1513221826.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:46.431Z,1513221826.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:46.843Z,1513221826.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:46.860Z,1513221826.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:47.184Z,1513221827.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:47.202Z,1513221827.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:47.589Z,1513221827.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:47.643Z,1513221827.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:47.994Z,1513221827.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:48.008Z,1513221828.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:48.391Z,1513221828.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:48.406Z,1513221828.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:48.861Z,1513221828.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:48.901Z,1513221828.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:49.219Z,1513221829.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:49.259Z,1513221829.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:49.598Z,1513221829.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:49.619Z,1513221829.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:50.002Z,1513221830.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:50.029Z,1513221830.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:50.393Z,1513221830.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:50.408Z,1513221830.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:50.824Z,1513221830.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:50.854Z,1513221830.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:51.187Z,1513221831.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:51.218Z,1513221831.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:51.587Z,1513221831.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:51.623Z,1513221831.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:52.011Z,1513221832.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:52.026Z,1513221832.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:52.411Z,1513221832.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:52.426Z,1513221832.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:52.426Z,1513221832.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2017-12-14T03:23:52.426Z,1513221832.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:23:52.428Z,1513221832.428 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:52.428Z,1513221832.428 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2017-12-14T03:23:52.428Z,1513221832.428 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:23:52.430Z,1513221832.430 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:52.430Z,1513221832.430 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2017-12-14T03:23:52.431Z,1513221832.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:23:52.444Z,1513221832.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:23:52.444Z,1513221832.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:23:52.445Z,1513221832.445 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:23:52.876Z,1513221832.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:52.945Z,1513221832.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:23:52.945Z,1513221832.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2017-12-14T03:23:52.946Z,1513221832.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:23:52.946Z,1513221832.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2017-12-14T03:23:52.946Z,1513221832.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:23:52.946Z,1513221832.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2017-12-14T03:23:53.188Z,1513221833.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:53.214Z,1513221833.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:23:53.215Z,1513221833.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:23:53.215Z,1513221833.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:23:53.215Z,1513221833.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:23:53.216Z,1513221833.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:23:53.216Z,1513221833.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:23:53.216Z,1513221833.216 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:23:53.221Z,1513221833.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:23:53.222Z,1513221833.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:23:53.593Z,1513221833.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:53.625Z,1513221833.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:54.004Z,1513221834.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:54.038Z,1513221834.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:54.387Z,1513221834.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:54.401Z,1513221834.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:54.794Z,1513221834.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:54.809Z,1513221834.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:55.214Z,1513221835.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:55.236Z,1513221835.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:55.597Z,1513221835.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:55.615Z,1513221835.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:55.998Z,1513221835.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:56.012Z,1513221836.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:56.384Z,1513221836.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:56.420Z,1513221836.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:56.783Z,1513221836.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:56.809Z,1513221836.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:57.203Z,1513221837.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:57.221Z,1513221837.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:57.598Z,1513221837.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:57.612Z,1513221837.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:58.008Z,1513221838.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:58.022Z,1513221838.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:23:58.404Z,1513221838.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:23:58.435Z,1513221838.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:01.980Z,1513221841.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:02.075Z,1513221842.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:02.178Z,1513221842.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:02.199Z,1513221842.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:02.536Z,1513221842.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:02.594Z,1513221842.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:02.938Z,1513221842.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:02.952Z,1513221842.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:03.336Z,1513221843.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:03.394Z,1513221843.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:03.743Z,1513221843.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:03.763Z,1513221843.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:04.146Z,1513221844.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:04.161Z,1513221844.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:04.540Z,1513221844.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:04.561Z,1513221844.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:04.932Z,1513221844.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:04.951Z,1513221844.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:05.337Z,1513221845.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:05.364Z,1513221845.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:05.750Z,1513221845.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:05.772Z,1513221845.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:06.149Z,1513221846.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:06.163Z,1513221846.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:06.539Z,1513221846.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:06.560Z,1513221846.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:06.939Z,1513221846.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:06.953Z,1513221846.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:07.334Z,1513221847.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:07.353Z,1513221847.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:07.747Z,1513221847.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:07.762Z,1513221847.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:08.142Z,1513221848.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:08.163Z,1513221848.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:08.544Z,1513221848.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:08.558Z,1513221848.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:08.937Z,1513221848.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:08.959Z,1513221848.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:09.335Z,1513221849.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:09.350Z,1513221849.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:09.741Z,1513221849.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:09.756Z,1513221849.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:10.142Z,1513221850.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:10.157Z,1513221850.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:10.542Z,1513221850.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:10.563Z,1513221850.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:10.935Z,1513221850.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:10.951Z,1513221850.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:11.332Z,1513221851.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:11.347Z,1513221851.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:11.777Z,1513221851.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:11.856Z,1513221851.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:12.137Z,1513221852.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:12.159Z,1513221852.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:12.520Z,1513221852.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:12.547Z,1513221852.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:12.950Z,1513221852.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:12.965Z,1513221852.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:13.345Z,1513221853.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:13.360Z,1513221853.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:13.746Z,1513221853.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:13.761Z,1513221853.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:14.133Z,1513221854.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:14.148Z,1513221854.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:14.540Z,1513221854.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:14.555Z,1513221854.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:14.941Z,1513221854.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:14.956Z,1513221854.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:15.339Z,1513221855.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:15.354Z,1513221855.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:15.746Z,1513221855.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:15.767Z,1513221855.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:16.146Z,1513221856.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:16.160Z,1513221856.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:16.544Z,1513221856.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:16.568Z,1513221856.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:16.937Z,1513221856.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:16.952Z,1513221856.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:17.332Z,1513221857.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:17.351Z,1513221857.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:17.731Z,1513221857.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:17.752Z,1513221857.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:18.140Z,1513221858.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:18.155Z,1513221858.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:18.527Z,1513221858.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:18.562Z,1513221858.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:18.952Z,1513221858.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:18.972Z,1513221858.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:19.345Z,1513221859.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:19.367Z,1513221859.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:19.751Z,1513221859.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:19.767Z,1513221859.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:20.130Z,1513221860.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:20.158Z,1513221860.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:20.531Z,1513221860.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:20.559Z,1513221860.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:20.924Z,1513221860.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:20.961Z,1513221860.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:21.361Z,1513221861.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:21.402Z,1513221861.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:21.746Z,1513221861.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:21.775Z,1513221861.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:22.145Z,1513221862.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:22.175Z,1513221862.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:22.542Z,1513221862.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:22.566Z,1513221862.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:22.932Z,1513221862.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:22.966Z,1513221862.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:23.332Z,1513221863.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:23.356Z,1513221863.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:23.734Z,1513221863.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:23.822Z,1513221863.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:24.137Z,1513221864.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:24.152Z,1513221864.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:24.564Z,1513221864.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:24.646Z,1513221864.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:24.945Z,1513221864.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:24.963Z,1513221864.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:25.350Z,1513221865.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:25.395Z,1513221865.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:25.745Z,1513221865.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:25.759Z,1513221865.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:26.140Z,1513221866.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:26.159Z,1513221866.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:26.535Z,1513221866.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:26.555Z,1513221866.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:26.939Z,1513221866.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:26.953Z,1513221866.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:27.338Z,1513221867.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:27.353Z,1513221867.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:27.782Z,1513221867.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:27.813Z,1513221867.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:28.150Z,1513221868.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:28.171Z,1513221868.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:28.539Z,1513221868.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:28.554Z,1513221868.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:28.951Z,1513221868.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:28.971Z,1513221868.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:29.339Z,1513221869.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:29.353Z,1513221869.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:29.746Z,1513221869.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:29.775Z,1513221869.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:30.151Z,1513221870.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:30.171Z,1513221870.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:30.546Z,1513221870.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:30.561Z,1513221870.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:30.964Z,1513221870.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:31.010Z,1513221871.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:31.341Z,1513221871.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:31.355Z,1513221871.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:31.751Z,1513221871.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:31.766Z,1513221871.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:32.150Z,1513221872.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:32.166Z,1513221872.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:32.546Z,1513221872.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:32.561Z,1513221872.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:32.945Z,1513221872.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:32.960Z,1513221872.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:33.327Z,1513221873.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:33.353Z,1513221873.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:33.750Z,1513221873.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:33.816Z,1513221873.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:34.179Z,1513221874.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:34.212Z,1513221874.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:34.546Z,1513221874.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:34.563Z,1513221874.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:34.924Z,1513221874.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:34.949Z,1513221874.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:35.344Z,1513221875.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:35.363Z,1513221875.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:35.750Z,1513221875.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:35.765Z,1513221875.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:36.153Z,1513221876.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:36.175Z,1513221876.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:36.543Z,1513221876.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:36.561Z,1513221876.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:36.924Z,1513221876.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:36.956Z,1513221876.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:37.366Z,1513221877.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:37.409Z,1513221877.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:37.760Z,1513221877.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:37.776Z,1513221877.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:38.145Z,1513221878.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:38.175Z,1513221878.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:38.541Z,1513221878.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:38.569Z,1513221878.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:38.937Z,1513221878.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:38.955Z,1513221878.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:39.333Z,1513221879.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:39.349Z,1513221879.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:39.738Z,1513221879.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:39.851Z,1513221879.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:40.134Z,1513221880.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:40.148Z,1513221880.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:40.553Z,1513221880.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:40.576Z,1513221880.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:40.946Z,1513221880.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:40.963Z,1513221880.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:41.346Z,1513221881.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:41.361Z,1513221881.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:41.743Z,1513221881.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:41.758Z,1513221881.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:42.138Z,1513221882.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:42.155Z,1513221882.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:42.540Z,1513221882.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:42.555Z,1513221882.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:42.930Z,1513221882.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:42.954Z,1513221882.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:43.340Z,1513221883.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:43.355Z,1513221883.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:43.764Z,1513221883.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:43.818Z,1513221883.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:44.144Z,1513221884.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:44.160Z,1513221884.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:44.544Z,1513221884.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:44.560Z,1513221884.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:44.933Z,1513221884.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:44.955Z,1513221884.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:45.340Z,1513221885.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:45.355Z,1513221885.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:45.745Z,1513221885.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:45.834Z,1513221885.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:46.152Z,1513221886.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:46.166Z,1513221886.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:46.542Z,1513221886.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:46.604Z,1513221886.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:46.955Z,1513221886.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:46.979Z,1513221886.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:47.354Z,1513221887.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:47.407Z,1513221887.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:47.747Z,1513221887.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:47.762Z,1513221887.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:48.142Z,1513221888.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:48.173Z,1513221888.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:48.551Z,1513221888.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:48.565Z,1513221888.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:48.927Z,1513221888.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:48.958Z,1513221888.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:49.328Z,1513221889.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:49.359Z,1513221889.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:49.731Z,1513221889.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:49.768Z,1513221889.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:50.173Z,1513221890.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:50.212Z,1513221890.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:50.532Z,1513221890.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:50.564Z,1513221890.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:50.945Z,1513221890.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:50.971Z,1513221890.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:51.341Z,1513221891.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:51.367Z,1513221891.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:51.745Z,1513221891.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:51.767Z,1513221891.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:52.135Z,1513221892.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:52.172Z,1513221892.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:52.520Z,1513221892.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:52.536Z,1513221892.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:52.932Z,1513221892.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:52.948Z,1513221892.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:53.389Z,1513221893.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:53.434Z,1513221893.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:53.745Z,1513221893.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:53.769Z,1513221893.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:54.141Z,1513221894.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:54.172Z,1513221894.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:54.545Z,1513221894.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:54.577Z,1513221894.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:54.936Z,1513221894.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:54.951Z,1513221894.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:55.339Z,1513221895.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:55.378Z,1513221895.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:55.732Z,1513221895.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:55.796Z,1513221895.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:56.127Z,1513221896.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:56.143Z,1513221896.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:56.570Z,1513221896.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:56.598Z,1513221896.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:56.954Z,1513221896.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:56.979Z,1513221896.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:57.351Z,1513221897.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:57.381Z,1513221897.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:57.734Z,1513221897.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:57.748Z,1513221897.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:58.136Z,1513221898.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:58.150Z,1513221898.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:24:58.154Z,1513221898.154 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T03:19:58.1Z
2017-12-14T03:24:58.154Z,1513221898.154 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:24:58.154Z,1513221898.154 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:24:58.537Z,1513221898.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:24:58.552Z,1513221898.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:02.335Z,1513221902.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:02.351Z,1513221902.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:02.429Z,1513221902.429 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0068.lzma
2017-12-14T03:25:02.449Z,1513221902.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:02.506Z,1513221902.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:02.872Z,1513221902.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:02.918Z,1513221902.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:03.179Z,1513221903.179 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0068.lzma.bak
2017-12-14T03:25:03.179Z,1513221903.179 [DataOverHttps](INFO): SBD MOMSN=5437463
2017-12-14T03:25:03.231Z,1513221903.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:03.267Z,1513221903.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:04.350Z,1513221904.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:04.383Z,1513221904.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:04.485Z,1513221904.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:04.534Z,1513221904.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:08.014Z,1513221908.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:08.104Z,1513221908.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:08.192Z,1513221908.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:08.207Z,1513221908.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:08.578Z,1513221908.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:08.593Z,1513221908.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:08.981Z,1513221908.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:09.027Z,1513221909.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:09.378Z,1513221909.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:09.401Z,1513221909.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:09.807Z,1513221909.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:09.859Z,1513221909.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:13.317Z,1513221913.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:13.341Z,1513221913.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:13.426Z,1513221913.426 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20171214T002839/Express0069.lzma
2017-12-14T03:25:13.453Z,1513221913.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:13.499Z,1513221913.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:13.770Z,1513221913.770 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:25:13.771Z,1513221913.771 [NAL9602] Data Fault, FailCount= 1
2017-12-14T03:25:13.771Z,1513221913.771 [NAL9602](ERROR): Data Fault
2017-12-14T03:25:13.790Z,1513221913.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:13.814Z,1513221913.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:13.843Z,1513221913.843 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:25:14.167Z,1513221914.167 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0069.lzma.bak
2017-12-14T03:25:14.167Z,1513221914.167 [DataOverHttps](INFO): SBD MOMSN=5437465
2017-12-14T03:25:14.192Z,1513221914.192 [NAL9602](INFO): Powering down
2017-12-14T03:25:14.210Z,1513221914.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:14.225Z,1513221914.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:16.109Z,1513221916.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:16.128Z,1513221916.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:16.155Z,1513221916.155 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:25:16.155Z,1513221916.155 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:25:16.156Z,1513221916.156 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:25:16.244Z,1513221916.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:16.292Z,1513221916.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:16.325Z,1513221916.325 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:25:16.325Z,1513221916.325 [NAL9602] No Fault, FailCount= 1
2017-12-14T03:25:19.760Z,1513221919.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:19.829Z,1513221919.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:19.935Z,1513221919.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:19.981Z,1513221919.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:20.294Z,1513221920.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:20.309Z,1513221920.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:20.692Z,1513221920.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:20.707Z,1513221920.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:21.165Z,1513221921.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:21.196Z,1513221921.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:21.504Z,1513221921.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:21.523Z,1513221921.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:21.891Z,1513221921.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:21.919Z,1513221921.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:22.286Z,1513221922.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:22.318Z,1513221922.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:22.686Z,1513221922.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:22.722Z,1513221922.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:23.095Z,1513221923.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:23.109Z,1513221923.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:23.491Z,1513221923.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:23.519Z,1513221923.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:23.896Z,1513221923.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:23.914Z,1513221923.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:24.295Z,1513221924.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:24.309Z,1513221924.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:24.694Z,1513221924.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:24.710Z,1513221924.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:25.086Z,1513221925.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:25.116Z,1513221925.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:25.486Z,1513221925.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:25.519Z,1513221925.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:25.886Z,1513221925.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:25.913Z,1513221925.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:26.300Z,1513221926.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:26.315Z,1513221926.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:26.700Z,1513221926.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:26.719Z,1513221926.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:27.086Z,1513221927.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:27.125Z,1513221927.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:27.486Z,1513221927.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:27.521Z,1513221927.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:27.890Z,1513221927.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:27.925Z,1513221927.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:28.285Z,1513221928.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:28.300Z,1513221928.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:28.786Z,1513221928.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:28.886Z,1513221928.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:29.092Z,1513221929.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:29.107Z,1513221929.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:29.494Z,1513221929.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:29.513Z,1513221929.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:29.897Z,1513221929.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:29.912Z,1513221929.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:30.297Z,1513221930.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:30.312Z,1513221930.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:30.692Z,1513221930.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:30.722Z,1513221930.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:31.096Z,1513221931.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:31.111Z,1513221931.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:31.496Z,1513221931.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:31.562Z,1513221931.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:31.895Z,1513221931.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:31.937Z,1513221931.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:32.348Z,1513221932.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:32.364Z,1513221932.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:32.691Z,1513221932.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:32.758Z,1513221932.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:33.135Z,1513221933.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:33.222Z,1513221933.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:33.486Z,1513221933.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:33.535Z,1513221933.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:33.886Z,1513221933.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:33.919Z,1513221933.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:34.286Z,1513221934.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:34.315Z,1513221934.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:34.684Z,1513221934.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:34.714Z,1513221934.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:35.188Z,1513221935.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:35.231Z,1513221935.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:35.487Z,1513221935.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:35.523Z,1513221935.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:35.890Z,1513221935.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:35.905Z,1513221935.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:36.287Z,1513221936.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:36.301Z,1513221936.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:36.692Z,1513221936.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:36.706Z,1513221936.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:37.096Z,1513221937.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:37.110Z,1513221937.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:37.495Z,1513221937.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:37.510Z,1513221937.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:37.894Z,1513221937.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:37.916Z,1513221937.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:38.295Z,1513221938.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:38.309Z,1513221938.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:38.692Z,1513221938.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:38.707Z,1513221938.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:39.108Z,1513221939.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:39.123Z,1513221939.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:39.501Z,1513221939.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:39.515Z,1513221939.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:39.895Z,1513221939.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:39.911Z,1513221939.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:40.290Z,1513221940.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:40.318Z,1513221940.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:40.696Z,1513221940.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:40.710Z,1513221940.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:41.098Z,1513221941.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:41.125Z,1513221941.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:41.534Z,1513221941.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:41.587Z,1513221941.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:41.892Z,1513221941.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:41.922Z,1513221941.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:42.292Z,1513221942.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:42.307Z,1513221942.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:42.696Z,1513221942.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:42.711Z,1513221942.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:43.099Z,1513221943.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:43.113Z,1513221943.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:43.491Z,1513221943.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:43.513Z,1513221943.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:43.890Z,1513221943.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:43.917Z,1513221943.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:44.270Z,1513221944.270 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:25:44.288Z,1513221944.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:44.324Z,1513221944.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:44.684Z,1513221944.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:44.740Z,1513221944.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:45.103Z,1513221945.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:45.127Z,1513221945.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:45.494Z,1513221945.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:45.530Z,1513221945.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:45.888Z,1513221945.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:45.903Z,1513221945.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:46.290Z,1513221946.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:46.312Z,1513221946.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:46.692Z,1513221946.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:46.706Z,1513221946.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:47.130Z,1513221947.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:47.163Z,1513221947.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:47.491Z,1513221947.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:47.523Z,1513221947.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:47.884Z,1513221947.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:47.983Z,1513221947.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:48.284Z,1513221948.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:48.308Z,1513221948.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:48.687Z,1513221948.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:48.718Z,1513221948.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:49.096Z,1513221949.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:49.166Z,1513221949.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:49.495Z,1513221949.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:49.529Z,1513221949.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:49.891Z,1513221949.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:49.927Z,1513221949.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:50.294Z,1513221950.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:50.309Z,1513221950.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:50.700Z,1513221950.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:50.715Z,1513221950.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:51.121Z,1513221951.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:51.144Z,1513221951.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:51.486Z,1513221951.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:51.519Z,1513221951.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:51.886Z,1513221951.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:51.919Z,1513221951.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:52.294Z,1513221952.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:52.366Z,1513221952.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:52.694Z,1513221952.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:52.709Z,1513221952.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:53.101Z,1513221953.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:53.116Z,1513221953.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:53.487Z,1513221953.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:53.660Z,1513221953.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:53.880Z,1513221953.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:53.918Z,1513221953.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:54.344Z,1513221954.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:54.407Z,1513221954.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:54.711Z,1513221954.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:54.728Z,1513221954.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:55.071Z,1513221955.071 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:25:55.088Z,1513221955.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:55.143Z,1513221955.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:55.488Z,1513221955.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:55.524Z,1513221955.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:55.912Z,1513221955.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:55.928Z,1513221955.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:56.314Z,1513221956.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:56.460Z,1513221956.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:56.783Z,1513221956.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:56.838Z,1513221956.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:57.096Z,1513221957.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:57.127Z,1513221957.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:57.527Z,1513221957.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:57.575Z,1513221957.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:57.888Z,1513221957.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:57.916Z,1513221957.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:58.287Z,1513221958.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:58.314Z,1513221958.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:58.698Z,1513221958.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:58.733Z,1513221958.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:59.136Z,1513221959.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:59.152Z,1513221959.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:59.506Z,1513221959.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:59.531Z,1513221959.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:25:59.893Z,1513221959.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:25:59.908Z,1513221959.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:00.292Z,1513221960.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:00.307Z,1513221960.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:00.695Z,1513221960.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:00.746Z,1513221960.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:01.127Z,1513221961.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:01.190Z,1513221961.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:01.495Z,1513221961.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:01.510Z,1513221961.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:01.909Z,1513221961.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:01.924Z,1513221961.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:02.302Z,1513221962.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:02.323Z,1513221962.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:02.705Z,1513221962.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:02.720Z,1513221962.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:03.143Z,1513221963.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:03.198Z,1513221963.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:03.491Z,1513221963.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:03.524Z,1513221963.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:03.896Z,1513221963.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:03.934Z,1513221963.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:04.301Z,1513221964.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:04.328Z,1513221964.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:04.707Z,1513221964.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:04.733Z,1513221964.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:05.105Z,1513221965.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:05.132Z,1513221965.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:05.505Z,1513221965.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:05.531Z,1513221965.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:05.895Z,1513221965.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:05.910Z,1513221965.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:06.296Z,1513221966.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:06.310Z,1513221966.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:06.694Z,1513221966.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:06.708Z,1513221966.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:07.130Z,1513221967.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:07.165Z,1513221967.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:07.487Z,1513221967.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:07.522Z,1513221967.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:07.912Z,1513221967.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:07.927Z,1513221967.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:08.314Z,1513221968.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:08.329Z,1513221968.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:08.711Z,1513221968.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:08.727Z,1513221968.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:09.104Z,1513221969.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:09.130Z,1513221969.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:09.495Z,1513221969.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:09.527Z,1513221969.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:09.895Z,1513221969.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:09.941Z,1513221969.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:10.312Z,1513221970.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:10.346Z,1513221970.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:10.698Z,1513221970.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:10.731Z,1513221970.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:11.105Z,1513221971.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:11.131Z,1513221971.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:11.517Z,1513221971.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:11.539Z,1513221971.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:11.892Z,1513221971.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:11.928Z,1513221971.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:12.295Z,1513221972.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:12.335Z,1513221972.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:12.691Z,1513221972.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:12.706Z,1513221972.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:13.098Z,1513221973.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:13.113Z,1513221973.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:13.543Z,1513221973.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:13.593Z,1513221973.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:13.910Z,1513221973.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:13.941Z,1513221973.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:14.305Z,1513221974.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:14.320Z,1513221974.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:14.709Z,1513221974.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:14.724Z,1513221974.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:15.147Z,1513221975.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:15.208Z,1513221975.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:15.492Z,1513221975.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:15.523Z,1513221975.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:15.896Z,1513221975.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:15.943Z,1513221975.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:16.295Z,1513221976.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:16.331Z,1513221976.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:16.738Z,1513221976.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:16.796Z,1513221976.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:22.395Z,1513221982.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:22.452Z,1513221982.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:22.598Z,1513221982.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:22.652Z,1513221982.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:22.992Z,1513221982.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:23.046Z,1513221983.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:23.384Z,1513221983.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:23.483Z,1513221983.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:23.788Z,1513221983.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:23.807Z,1513221983.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:24.170Z,1513221984.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:24.236Z,1513221984.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:24.592Z,1513221984.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:24.623Z,1513221984.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:24.994Z,1513221984.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:25.066Z,1513221985.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:25.404Z,1513221985.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:25.424Z,1513221985.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:25.771Z,1513221985.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:25.811Z,1513221985.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:26.168Z,1513221986.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:26.217Z,1513221986.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:26.572Z,1513221986.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:26.606Z,1513221986.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:26.996Z,1513221986.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:27.027Z,1513221987.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:27.374Z,1513221987.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:27.421Z,1513221987.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:27.788Z,1513221987.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:27.826Z,1513221987.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:28.198Z,1513221988.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:28.214Z,1513221988.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:28.612Z,1513221988.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:28.635Z,1513221988.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:28.967Z,1513221988.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:29.002Z,1513221989.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:29.399Z,1513221989.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:29.417Z,1513221989.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:29.840Z,1513221989.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:29.891Z,1513221989.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:30.169Z,1513221990.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:30.225Z,1513221990.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:30.596Z,1513221990.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:30.623Z,1513221990.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:30.993Z,1513221990.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:31.023Z,1513221991.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:31.389Z,1513221991.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:31.408Z,1513221991.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:31.769Z,1513221991.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:31.823Z,1513221991.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:32.182Z,1513221992.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:32.207Z,1513221992.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:32.574Z,1513221992.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:32.609Z,1513221992.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:32.969Z,1513221992.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:33.053Z,1513221993.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:33.392Z,1513221993.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:33.415Z,1513221993.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:33.779Z,1513221993.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:33.818Z,1513221993.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:34.216Z,1513221994.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:34.239Z,1513221994.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:34.580Z,1513221994.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:34.603Z,1513221994.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:34.976Z,1513221994.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:35.028Z,1513221995.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:35.378Z,1513221995.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:35.399Z,1513221995.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:35.779Z,1513221995.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:35.799Z,1513221995.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:36.178Z,1513221996.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:36.186Z,1513221996.186 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T03:26:36.186Z,1513221996.186 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:26:36.186Z,1513221996.186 [BPC1](ERROR): Data Fault
2017-12-14T03:26:36.202Z,1513221996.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:36.247Z,1513221996.247 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:26:36.615Z,1513221996.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:36.648Z,1513221996.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:36.991Z,1513221996.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:37.011Z,1513221997.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:37.388Z,1513221997.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:37.453Z,1513221997.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:37.507Z,1513221997.507 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:26:37.507Z,1513221997.507 [BPC1] No Fault, FailCount= 1
2017-12-14T03:26:37.767Z,1513221997.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:37.875Z,1513221997.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:38.190Z,1513221998.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:38.208Z,1513221998.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:38.581Z,1513221998.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:38.595Z,1513221998.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:38.968Z,1513221998.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:38.996Z,1513221998.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:39.367Z,1513221999.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:39.398Z,1513221999.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:39.789Z,1513221999.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:39.859Z,1513221999.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:40.191Z,1513222000.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:40.206Z,1513222000.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:40.590Z,1513222000.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:40.605Z,1513222000.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:40.967Z,1513222000.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:41.001Z,1513222001.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:41.380Z,1513222001.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:41.396Z,1513222001.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:41.768Z,1513222001.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:41.799Z,1513222001.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:42.177Z,1513222002.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:42.192Z,1513222002.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:42.591Z,1513222002.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:42.606Z,1513222002.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:43.002Z,1513222003.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:43.035Z,1513222003.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:43.407Z,1513222003.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:43.422Z,1513222003.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:43.775Z,1513222003.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:43.807Z,1513222003.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:44.171Z,1513222004.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:44.191Z,1513222004.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:44.576Z,1513222004.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:44.595Z,1513222004.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:44.976Z,1513222004.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:44.991Z,1513222004.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:45.386Z,1513222005.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:45.401Z,1513222005.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:45.782Z,1513222005.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:45.796Z,1513222005.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:46.185Z,1513222006.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:46.231Z,1513222006.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:46.583Z,1513222006.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:46.603Z,1513222006.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:46.976Z,1513222006.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:46.991Z,1513222006.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:47.378Z,1513222007.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:47.395Z,1513222007.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:47.776Z,1513222007.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:47.792Z,1513222007.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:48.170Z,1513222008.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:48.197Z,1513222008.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:48.586Z,1513222008.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:48.602Z,1513222008.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:48.981Z,1513222008.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:48.996Z,1513222008.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:49.382Z,1513222009.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:49.436Z,1513222009.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:49.777Z,1513222009.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:49.792Z,1513222009.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:50.176Z,1513222010.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:50.191Z,1513222010.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:50.575Z,1513222010.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:50.591Z,1513222010.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:50.976Z,1513222010.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:50.991Z,1513222010.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:51.370Z,1513222011.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:51.417Z,1513222011.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:51.786Z,1513222011.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:51.803Z,1513222011.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:52.186Z,1513222012.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:52.201Z,1513222012.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:52.611Z,1513222012.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:52.639Z,1513222012.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:52.967Z,1513222012.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:52.998Z,1513222012.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:53.367Z,1513222013.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:53.394Z,1513222013.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:53.395Z,1513222013.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2017-12-14T03:26:53.395Z,1513222013.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:26:53.396Z,1513222013.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:53.401Z,1513222013.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2017-12-14T03:26:53.401Z,1513222013.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:26:53.403Z,1513222013.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:53.403Z,1513222013.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2017-12-14T03:26:53.403Z,1513222013.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:26:53.428Z,1513222013.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:26:53.433Z,1513222013.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:26:53.433Z,1513222013.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:26:53.775Z,1513222013.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:53.821Z,1513222013.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:26:53.821Z,1513222013.821 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2017-12-14T03:26:53.822Z,1513222013.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:26:53.822Z,1513222013.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2017-12-14T03:26:53.822Z,1513222013.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:26:53.822Z,1513222013.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2017-12-14T03:26:54.183Z,1513222014.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:54.196Z,1513222014.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:26:54.197Z,1513222014.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:26:54.197Z,1513222014.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:26:54.198Z,1513222014.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:26:54.198Z,1513222014.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:26:54.199Z,1513222014.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:26:54.199Z,1513222014.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:26:54.199Z,1513222014.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:26:54.200Z,1513222014.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:26:54.583Z,1513222014.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:54.603Z,1513222014.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:54.982Z,1513222014.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:55.003Z,1513222015.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:55.382Z,1513222015.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:55.397Z,1513222015.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:55.831Z,1513222015.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:55.883Z,1513222015.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:56.176Z,1513222016.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:56.195Z,1513222016.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:56.576Z,1513222016.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:56.603Z,1513222016.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:56.978Z,1513222016.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:56.994Z,1513222016.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:57.371Z,1513222017.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:57.394Z,1513222017.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:57.785Z,1513222017.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:57.800Z,1513222017.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:58.186Z,1513222018.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:58.254Z,1513222018.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:58.587Z,1513222018.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:58.607Z,1513222018.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:58.980Z,1513222018.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:58.995Z,1513222018.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:59.368Z,1513222019.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:59.397Z,1513222019.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:26:59.534Z,1513222019.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:59.768Z,1513222019.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:26:59.803Z,1513222019.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:00.168Z,1513222020.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:00.212Z,1513222020.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:00.332Z,1513222020.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:00.595Z,1513222020.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:00.616Z,1513222020.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:00.991Z,1513222020.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:01.006Z,1513222021.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:01.390Z,1513222021.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:01.402Z,1513222021.402 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:27:01.402Z,1513222021.402 [BPC1] Communications Fault, FailCount= 2
2017-12-14T03:27:01.402Z,1513222021.402 [BPC1](ERROR): Communications Fault
2017-12-14T03:27:01.410Z,1513222021.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:01.424Z,1513222021.424 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:27:01.769Z,1513222021.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:01.800Z,1513222021.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:02.168Z,1513222022.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:02.224Z,1513222022.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:02.576Z,1513222022.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:02.607Z,1513222022.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:02.620Z,1513222022.620 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:27:02.621Z,1513222022.621 [BPC1] No Fault, FailCount= 2
2017-12-14T03:27:02.976Z,1513222022.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:03.055Z,1513222023.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:03.375Z,1513222023.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:03.408Z,1513222023.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:03.786Z,1513222023.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:03.819Z,1513222023.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:04.231Z,1513222024.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:04.264Z,1513222024.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:04.591Z,1513222024.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:04.614Z,1513222024.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:04.975Z,1513222024.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:04.996Z,1513222024.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:05.399Z,1513222025.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:05.446Z,1513222025.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:05.768Z,1513222025.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:05.795Z,1513222025.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:06.167Z,1513222026.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:06.200Z,1513222026.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:06.590Z,1513222026.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:06.607Z,1513222026.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:06.990Z,1513222026.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:07.004Z,1513222027.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:07.394Z,1513222027.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:07.408Z,1513222027.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:07.789Z,1513222027.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:07.803Z,1513222027.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:08.177Z,1513222028.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:08.207Z,1513222028.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:08.594Z,1513222028.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:08.633Z,1513222028.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:08.968Z,1513222028.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:09.005Z,1513222029.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:09.367Z,1513222029.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:09.415Z,1513222029.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:09.778Z,1513222029.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:09.811Z,1513222029.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:10.197Z,1513222030.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:10.211Z,1513222030.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:10.578Z,1513222030.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:10.607Z,1513222030.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:10.967Z,1513222030.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:10.999Z,1513222030.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:11.384Z,1513222031.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:11.452Z,1513222031.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:11.806Z,1513222031.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:11.826Z,1513222031.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:12.175Z,1513222032.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:12.213Z,1513222032.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:12.334Z,1513222032.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:12.585Z,1513222032.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:12.611Z,1513222032.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:12.986Z,1513222032.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:13.015Z,1513222033.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:13.131Z,1513222033.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:13.386Z,1513222033.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:13.409Z,1513222033.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:13.537Z,1513222033.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:13.775Z,1513222033.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:13.790Z,1513222033.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:14.171Z,1513222034.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:14.186Z,1513222034.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:14.333Z,1513222034.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:14.579Z,1513222034.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:14.593Z,1513222034.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:15.017Z,1513222035.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:15.069Z,1513222035.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:15.130Z,1513222035.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:15.376Z,1513222035.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:15.395Z,1513222035.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:15.533Z,1513222035.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:15.790Z,1513222035.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:15.820Z,1513222035.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:16.185Z,1513222036.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:16.200Z,1513222036.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:16.329Z,1513222036.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:16.578Z,1513222036.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:16.593Z,1513222036.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:16.975Z,1513222036.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:16.990Z,1513222036.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:17.125Z,1513222037.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:17.529Z,1513222037.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:18.325Z,1513222038.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:19.122Z,1513222039.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:19.525Z,1513222039.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:20.321Z,1513222040.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:20.440Z,1513222040.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:20.477Z,1513222040.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:20.566Z,1513222040.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:20.594Z,1513222040.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:20.946Z,1513222040.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:20.961Z,1513222040.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:21.117Z,1513222041.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:21.345Z,1513222041.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:21.360Z,1513222041.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:21.522Z,1513222041.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:21.743Z,1513222041.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:21.760Z,1513222041.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:22.138Z,1513222042.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:22.172Z,1513222042.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:22.317Z,1513222042.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:22.537Z,1513222042.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:22.552Z,1513222042.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:22.924Z,1513222042.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:22.949Z,1513222042.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:23.113Z,1513222043.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:23.339Z,1513222043.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:23.357Z,1513222043.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:23.517Z,1513222043.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:23.751Z,1513222043.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:23.771Z,1513222043.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:24.149Z,1513222044.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:24.199Z,1513222044.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:24.313Z,1513222044.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:24.558Z,1513222044.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:24.598Z,1513222044.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:24.923Z,1513222044.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:24.976Z,1513222044.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:25.111Z,1513222045.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:25.329Z,1513222045.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:25.355Z,1513222045.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:25.533Z,1513222045.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:25.728Z,1513222045.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:25.755Z,1513222045.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:26.124Z,1513222046.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:26.158Z,1513222046.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:26.330Z,1513222046.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:26.552Z,1513222046.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:26.567Z,1513222046.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:26.948Z,1513222046.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:26.967Z,1513222046.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:27.127Z,1513222047.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:27.349Z,1513222047.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:27.371Z,1513222047.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:27.537Z,1513222047.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:27.745Z,1513222047.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:27.781Z,1513222047.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:28.129Z,1513222048.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:28.159Z,1513222048.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:28.333Z,1513222048.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:28.541Z,1513222048.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:28.563Z,1513222048.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:28.942Z,1513222048.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:28.967Z,1513222048.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:29.129Z,1513222049.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:29.354Z,1513222049.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:29.377Z,1513222049.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:29.533Z,1513222049.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:29.730Z,1513222049.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:29.757Z,1513222049.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:30.139Z,1513222050.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:30.168Z,1513222050.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:30.329Z,1513222050.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:30.546Z,1513222050.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:30.572Z,1513222050.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:30.971Z,1513222050.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:30.995Z,1513222050.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:31.125Z,1513222051.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:31.343Z,1513222051.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:31.366Z,1513222051.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:31.529Z,1513222051.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:31.732Z,1513222051.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:31.772Z,1513222051.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:32.137Z,1513222052.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:32.152Z,1513222052.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:32.325Z,1513222052.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:32.538Z,1513222052.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:32.554Z,1513222052.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:32.938Z,1513222052.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:32.959Z,1513222052.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:33.121Z,1513222053.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:33.338Z,1513222053.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:33.390Z,1513222053.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:33.525Z,1513222053.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:33.735Z,1513222053.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:33.755Z,1513222053.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:34.158Z,1513222054.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:34.190Z,1513222054.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:34.321Z,1513222054.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:34.541Z,1513222054.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:34.556Z,1513222054.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:34.942Z,1513222054.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:34.957Z,1513222054.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:35.120Z,1513222055.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:35.346Z,1513222055.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:35.360Z,1513222055.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:35.525Z,1513222055.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:35.736Z,1513222055.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:35.751Z,1513222055.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:36.132Z,1513222056.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:36.155Z,1513222056.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:36.321Z,1513222056.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:36.542Z,1513222056.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:36.558Z,1513222056.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:36.943Z,1513222056.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:36.958Z,1513222056.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:37.120Z,1513222057.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:37.384Z,1513222057.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:37.404Z,1513222057.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:37.525Z,1513222057.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:37.737Z,1513222057.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:37.752Z,1513222057.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:38.139Z,1513222058.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:38.154Z,1513222058.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:38.323Z,1513222058.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:38.531Z,1513222058.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:38.554Z,1513222058.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:38.932Z,1513222058.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:38.952Z,1513222058.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:39.119Z,1513222059.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:39.334Z,1513222059.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:39.349Z,1513222059.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:39.537Z,1513222059.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:39.746Z,1513222059.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:39.762Z,1513222059.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:40.145Z,1513222060.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:40.160Z,1513222060.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:40.333Z,1513222060.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:40.548Z,1513222060.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:40.601Z,1513222060.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:40.923Z,1513222060.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:40.954Z,1513222060.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:41.131Z,1513222061.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:41.328Z,1513222061.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:41.359Z,1513222061.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:41.549Z,1513222061.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:41.744Z,1513222061.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:41.759Z,1513222061.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:42.125Z,1513222062.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:42.160Z,1513222062.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:42.346Z,1513222062.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:42.549Z,1513222062.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:42.571Z,1513222062.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:42.952Z,1513222062.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:42.979Z,1513222062.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:43.141Z,1513222063.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:43.351Z,1513222063.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:43.367Z,1513222063.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:43.546Z,1513222063.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:43.751Z,1513222063.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:43.807Z,1513222063.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:44.123Z,1513222064.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:44.185Z,1513222064.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:44.341Z,1513222064.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:44.552Z,1513222064.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:44.567Z,1513222064.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:44.950Z,1513222064.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:44.971Z,1513222064.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:45.137Z,1513222065.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:45.342Z,1513222065.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:45.399Z,1513222065.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:45.541Z,1513222065.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:45.728Z,1513222065.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:45.760Z,1513222065.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:46.127Z,1513222066.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:46.158Z,1513222066.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:46.339Z,1513222066.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:46.574Z,1513222066.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:46.623Z,1513222066.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:46.942Z,1513222066.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:46.971Z,1513222066.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:47.133Z,1513222067.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:47.334Z,1513222067.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:47.463Z,1513222067.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:47.728Z,1513222067.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:47.759Z,1513222067.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:47.817Z,1513222067.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:48.131Z,1513222068.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:48.163Z,1513222068.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:48.537Z,1513222068.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:48.562Z,1513222068.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:48.614Z,1513222068.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:48.963Z,1513222068.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:48.978Z,1513222068.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:49.191Z,1513222069.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:49.339Z,1513222069.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:49.365Z,1513222069.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:49.731Z,1513222069.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:49.763Z,1513222069.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:49.985Z,1513222069.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:50.124Z,1513222070.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:50.151Z,1513222070.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:50.540Z,1513222070.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:50.563Z,1513222070.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:50.781Z,1513222070.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:50.941Z,1513222070.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:50.965Z,1513222070.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:51.245Z,1513222071.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:51.343Z,1513222071.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:51.379Z,1513222071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:51.728Z,1513222071.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:51.769Z,1513222071.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:52.041Z,1513222072.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:52.130Z,1513222072.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:52.256Z,1513222072.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:52.544Z,1513222072.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:52.568Z,1513222072.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:52.837Z,1513222072.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:52.942Z,1513222072.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:52.971Z,1513222072.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:53.341Z,1513222073.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:53.363Z,1513222073.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:53.537Z,1513222073.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:53.733Z,1513222073.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:53.777Z,1513222073.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:54.139Z,1513222074.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:54.170Z,1513222074.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:54.333Z,1513222074.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:54.545Z,1513222074.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:54.574Z,1513222074.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:54.941Z,1513222074.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:54.968Z,1513222074.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:55.132Z,1513222075.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:55.334Z,1513222075.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:55.349Z,1513222075.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:55.541Z,1513222075.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:55.733Z,1513222075.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:55.784Z,1513222075.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:56.132Z,1513222076.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:56.148Z,1513222076.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:56.337Z,1513222076.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:56.542Z,1513222076.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:56.556Z,1513222076.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:56.959Z,1513222076.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:57.037Z,1513222077.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:57.134Z,1513222077.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:57.350Z,1513222077.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:57.381Z,1513222077.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:57.537Z,1513222077.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:57.738Z,1513222077.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:57.753Z,1513222077.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:58.132Z,1513222078.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:58.146Z,1513222078.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:58.333Z,1513222078.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:58.543Z,1513222078.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:58.608Z,1513222078.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:58.941Z,1513222078.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:58.956Z,1513222078.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:59.129Z,1513222079.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:59.349Z,1513222079.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:59.383Z,1513222079.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:27:59.533Z,1513222079.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:59.738Z,1513222079.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:27:59.752Z,1513222079.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:00.161Z,1513222080.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:00.195Z,1513222080.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:00.329Z,1513222080.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:00.540Z,1513222080.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:00.563Z,1513222080.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:00.942Z,1513222080.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:00.956Z,1513222080.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:01.126Z,1513222081.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:01.336Z,1513222081.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:01.363Z,1513222081.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:01.529Z,1513222081.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:01.737Z,1513222081.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:01.751Z,1513222081.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:02.140Z,1513222082.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:02.163Z,1513222082.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:02.326Z,1513222082.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:02.545Z,1513222082.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:02.560Z,1513222082.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:02.944Z,1513222082.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:02.960Z,1513222082.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:03.123Z,1513222083.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:03.388Z,1513222083.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:03.407Z,1513222083.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:03.530Z,1513222083.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:03.738Z,1513222083.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:03.759Z,1513222083.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:04.138Z,1513222084.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:04.152Z,1513222084.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:04.328Z,1513222084.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:04.524Z,1513222084.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:04.565Z,1513222084.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:04.923Z,1513222084.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:04.951Z,1513222084.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:05.121Z,1513222085.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:05.344Z,1513222085.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:05.360Z,1513222085.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:05.525Z,1513222085.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:05.746Z,1513222085.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:05.761Z,1513222085.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:06.150Z,1513222086.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:06.165Z,1513222086.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:06.321Z,1513222086.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:06.547Z,1513222086.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:06.658Z,1513222086.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:06.930Z,1513222086.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:06.969Z,1513222086.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:07.119Z,1513222087.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:07.327Z,1513222087.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:07.363Z,1513222087.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:07.529Z,1513222087.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:07.723Z,1513222087.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:07.790Z,1513222087.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:08.124Z,1513222088.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:08.160Z,1513222088.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:08.325Z,1513222088.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:08.542Z,1513222088.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:08.565Z,1513222088.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:08.950Z,1513222088.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:08.995Z,1513222088.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:09.123Z,1513222089.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:09.346Z,1513222089.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:09.371Z,1513222089.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:09.529Z,1513222089.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:09.724Z,1513222089.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:09.798Z,1513222089.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:10.125Z,1513222090.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:10.163Z,1513222090.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:10.325Z,1513222090.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:10.546Z,1513222090.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:10.610Z,1513222090.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:10.946Z,1513222090.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:10.961Z,1513222090.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:11.121Z,1513222091.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:11.350Z,1513222091.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:11.371Z,1513222091.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:11.525Z,1513222091.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:11.731Z,1513222091.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:11.759Z,1513222091.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:12.131Z,1513222092.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:12.159Z,1513222092.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:12.321Z,1513222092.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:12.533Z,1513222092.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:12.568Z,1513222092.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:12.957Z,1513222092.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:12.980Z,1513222092.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:13.118Z,1513222093.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:13.346Z,1513222093.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:13.367Z,1513222093.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:13.521Z,1513222093.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:13.738Z,1513222093.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:13.752Z,1513222093.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:14.137Z,1513222094.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:14.152Z,1513222094.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:14.317Z,1513222094.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:14.547Z,1513222094.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:14.568Z,1513222094.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:14.944Z,1513222094.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:14.959Z,1513222094.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:15.113Z,1513222095.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:15.345Z,1513222095.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:15.360Z,1513222095.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:15.517Z,1513222095.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:15.736Z,1513222095.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:15.751Z,1513222095.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:16.171Z,1513222096.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:16.218Z,1513222096.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:16.313Z,1513222096.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:16.530Z,1513222096.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:16.606Z,1513222096.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:16.950Z,1513222096.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:16.966Z,1513222096.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:17.109Z,1513222097.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:17.337Z,1513222097.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:17.371Z,1513222097.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:17.513Z,1513222097.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:18.309Z,1513222098.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:19.105Z,1513222099.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:19.509Z,1513222099.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:20.305Z,1513222100.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:20.729Z,1513222100.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:20.904Z,1513222100.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:21.000Z,1513222101.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:21.015Z,1513222101.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:21.103Z,1513222101.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:21.377Z,1513222101.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:21.392Z,1513222101.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:21.541Z,1513222101.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:21.779Z,1513222101.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:21.794Z,1513222101.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:22.178Z,1513222102.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:22.199Z,1513222102.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:22.337Z,1513222102.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:22.565Z,1513222102.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:22.595Z,1513222102.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:22.977Z,1513222102.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:22.992Z,1513222102.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:23.136Z,1513222103.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:23.367Z,1513222103.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:23.386Z,1513222103.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:23.541Z,1513222103.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:23.778Z,1513222103.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:23.793Z,1513222103.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:24.179Z,1513222104.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:24.194Z,1513222104.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:24.337Z,1513222104.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:24.578Z,1513222104.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:24.599Z,1513222104.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:24.964Z,1513222104.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:24.983Z,1513222104.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:25.133Z,1513222105.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:25.358Z,1513222105.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:25.395Z,1513222105.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:25.537Z,1513222105.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:25.773Z,1513222105.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:25.859Z,1513222105.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:26.162Z,1513222106.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:26.189Z,1513222106.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:26.333Z,1513222106.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:26.582Z,1513222106.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:26.596Z,1513222106.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:26.980Z,1513222106.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:26.995Z,1513222106.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:27.129Z,1513222107.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:27.362Z,1513222107.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:27.463Z,1513222107.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:27.533Z,1513222107.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:27.756Z,1513222107.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:27.791Z,1513222107.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:28.155Z,1513222108.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:28.188Z,1513222108.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:28.329Z,1513222108.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:28.582Z,1513222108.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:28.597Z,1513222108.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:29.006Z,1513222109.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:29.035Z,1513222109.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:29.126Z,1513222109.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:29.366Z,1513222109.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:29.394Z,1513222109.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:29.529Z,1513222109.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:29.755Z,1513222109.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:29.796Z,1513222109.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:30.159Z,1513222110.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:30.195Z,1513222110.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:30.325Z,1513222110.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:30.556Z,1513222110.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:30.571Z,1513222110.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:30.962Z,1513222110.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:30.993Z,1513222110.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:31.121Z,1513222111.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:31.363Z,1513222111.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:31.395Z,1513222111.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:31.525Z,1513222111.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:31.774Z,1513222111.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:31.828Z,1513222111.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:32.193Z,1513222112.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:32.263Z,1513222112.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:32.321Z,1513222112.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:32.580Z,1513222112.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:32.649Z,1513222112.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:32.963Z,1513222112.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:32.978Z,1513222112.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:33.117Z,1513222113.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:33.363Z,1513222113.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:33.415Z,1513222113.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:33.521Z,1513222113.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:33.764Z,1513222113.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:33.780Z,1513222113.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:34.164Z,1513222114.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:34.184Z,1513222114.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:34.317Z,1513222114.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:34.566Z,1513222114.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:34.580Z,1513222114.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:34.977Z,1513222114.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:35.008Z,1513222115.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:35.115Z,1513222115.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:35.385Z,1513222115.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:35.416Z,1513222115.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:35.530Z,1513222115.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:35.763Z,1513222115.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:35.783Z,1513222115.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:36.165Z,1513222116.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:36.180Z,1513222116.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:36.325Z,1513222116.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:36.567Z,1513222116.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:36.582Z,1513222116.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:36.965Z,1513222116.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:36.979Z,1513222116.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:37.126Z,1513222117.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:37.367Z,1513222117.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:37.381Z,1513222117.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:37.533Z,1513222117.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:37.769Z,1513222117.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:37.783Z,1513222117.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:38.170Z,1513222118.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:38.198Z,1513222118.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:38.329Z,1513222118.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:38.612Z,1513222118.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:38.631Z,1513222118.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:38.961Z,1513222118.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:38.984Z,1513222118.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:39.125Z,1513222119.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:39.375Z,1513222119.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:39.389Z,1513222119.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:39.529Z,1513222119.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:39.771Z,1513222119.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:39.791Z,1513222119.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:40.167Z,1513222120.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:40.187Z,1513222120.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:40.325Z,1513222120.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:40.573Z,1513222120.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:40.588Z,1513222120.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:40.982Z,1513222120.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:40.996Z,1513222120.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:41.121Z,1513222121.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:41.372Z,1513222121.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:41.395Z,1513222121.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:41.525Z,1513222121.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:41.755Z,1513222121.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:41.808Z,1513222121.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:42.156Z,1513222122.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:42.191Z,1513222122.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:42.321Z,1513222122.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:42.559Z,1513222122.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:42.576Z,1513222122.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:42.955Z,1513222122.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:42.975Z,1513222122.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:43.117Z,1513222123.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:43.366Z,1513222123.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:43.393Z,1513222123.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:43.521Z,1513222123.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:43.800Z,1513222123.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:43.815Z,1513222123.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:44.173Z,1513222124.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:44.207Z,1513222124.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:44.317Z,1513222124.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:44.571Z,1513222124.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:44.606Z,1513222124.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:44.982Z,1513222124.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:45.015Z,1513222125.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:45.114Z,1513222125.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:45.366Z,1513222125.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:45.380Z,1513222125.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:45.517Z,1513222125.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:45.763Z,1513222125.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:45.783Z,1513222125.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:46.162Z,1513222126.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:46.183Z,1513222126.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:46.313Z,1513222126.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:46.577Z,1513222126.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:46.609Z,1513222126.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:46.971Z,1513222126.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:46.985Z,1513222126.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:47.109Z,1513222127.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:47.370Z,1513222127.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:47.386Z,1513222127.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:47.513Z,1513222127.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:47.765Z,1513222127.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:47.780Z,1513222127.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:48.181Z,1513222128.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:48.221Z,1513222128.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:48.310Z,1513222128.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:48.564Z,1513222128.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:48.583Z,1513222128.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:48.989Z,1513222128.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:49.008Z,1513222129.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:49.107Z,1513222129.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:49.356Z,1513222129.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:49.377Z,1513222129.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:49.770Z,1513222129.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:49.792Z,1513222129.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:49.901Z,1513222129.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:50.168Z,1513222130.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:50.183Z,1513222130.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:50.357Z,1513222130.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:50.574Z,1513222130.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:50.589Z,1513222130.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:50.968Z,1513222130.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:50.983Z,1513222130.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:51.153Z,1513222131.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:51.387Z,1513222131.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:51.416Z,1513222131.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:51.557Z,1513222131.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:51.755Z,1513222131.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:51.784Z,1513222131.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:52.172Z,1513222132.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:52.195Z,1513222132.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:52.353Z,1513222132.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:52.575Z,1513222132.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:52.654Z,1513222132.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:52.985Z,1513222132.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:53.000Z,1513222133.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:53.149Z,1513222133.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:53.370Z,1513222133.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:53.429Z,1513222133.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:53.553Z,1513222133.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:53.755Z,1513222133.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:53.798Z,1513222133.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:54.159Z,1513222134.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:54.215Z,1513222134.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:54.349Z,1513222134.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:54.598Z,1513222134.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:54.630Z,1513222134.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:54.961Z,1513222134.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:55.003Z,1513222135.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:55.146Z,1513222135.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:55.361Z,1513222135.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:55.376Z,1513222135.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:55.549Z,1513222135.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:55.778Z,1513222135.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:55.808Z,1513222135.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:56.190Z,1513222136.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:56.204Z,1513222136.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:56.346Z,1513222136.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:56.573Z,1513222136.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:56.601Z,1513222136.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:56.965Z,1513222136.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:56.979Z,1513222136.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:57.141Z,1513222137.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:57.367Z,1513222137.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:57.382Z,1513222137.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:57.546Z,1513222137.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:57.765Z,1513222137.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:57.780Z,1513222137.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:58.162Z,1513222138.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:58.183Z,1513222138.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:58.343Z,1513222138.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:58.578Z,1513222138.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:58.613Z,1513222138.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:58.969Z,1513222138.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:58.984Z,1513222138.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:59.137Z,1513222139.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:59.370Z,1513222139.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:59.384Z,1513222139.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:28:59.544Z,1513222139.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:59.764Z,1513222139.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:28:59.778Z,1513222139.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:00.166Z,1513222140.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:00.180Z,1513222140.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:00.337Z,1513222140.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:00.564Z,1513222140.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:00.580Z,1513222140.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:00.988Z,1513222140.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:01.034Z,1513222141.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:01.134Z,1513222141.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:01.362Z,1513222141.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:01.383Z,1513222141.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:01.537Z,1513222141.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:01.770Z,1513222141.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:01.785Z,1513222141.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:01.806Z,1513222141.806 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:29:02.173Z,1513222142.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:02.187Z,1513222142.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:02.333Z,1513222142.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:02.569Z,1513222142.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:02.622Z,1513222142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:02.967Z,1513222142.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:02.982Z,1513222142.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:03.131Z,1513222143.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:03.367Z,1513222143.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:03.387Z,1513222143.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:03.537Z,1513222143.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:03.769Z,1513222143.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:03.784Z,1513222143.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:04.207Z,1513222144.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:04.234Z,1513222144.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:04.334Z,1513222144.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:04.570Z,1513222144.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:04.598Z,1513222144.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:04.942Z,1513222144.942 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T03:29:04.942Z,1513222144.942 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T03:29:04.942Z,1513222144.942 [DropWeight](ERROR): Hardware Fault
2017-12-14T03:29:04.986Z,1513222144.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:05.010Z,1513222145.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:05.034Z,1513222145.034 [CBIT](INFO): Critical error at 20171214T032904
2017-12-14T03:29:05.036Z,1513222145.036 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T03:29:05.041Z,1513222145.041 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T03:29:05.131Z,1513222145.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:05.373Z,1513222145.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:05.396Z,1513222145.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:05.417Z,1513222145.417 [CBIT](INFO): Critical error at 20171214T032905
2017-12-14T03:29:05.541Z,1513222145.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:05.767Z,1513222145.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:05.783Z,1513222145.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:06.153Z,1513222146.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:06.184Z,1513222146.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:06.337Z,1513222146.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:06.554Z,1513222146.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:06.587Z,1513222146.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:06.955Z,1513222146.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:06.988Z,1513222146.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:07.133Z,1513222147.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:07.392Z,1513222147.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:07.412Z,1513222147.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:07.537Z,1513222147.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:07.801Z,1513222147.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:07.828Z,1513222147.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:08.169Z,1513222148.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:08.203Z,1513222148.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:08.334Z,1513222148.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:08.570Z,1513222148.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:08.598Z,1513222148.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:08.954Z,1513222148.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:08.976Z,1513222148.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:09.131Z,1513222149.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:09.360Z,1513222149.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:09.375Z,1513222149.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:09.537Z,1513222149.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:09.764Z,1513222149.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:09.779Z,1513222149.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:10.159Z,1513222150.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:10.174Z,1513222150.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:10.336Z,1513222150.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:10.573Z,1513222150.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:10.605Z,1513222150.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:10.977Z,1513222150.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:11.005Z,1513222151.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:11.129Z,1513222151.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:11.378Z,1513222151.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:11.404Z,1513222151.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:11.535Z,1513222151.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:11.767Z,1513222151.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:11.808Z,1513222151.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:12.159Z,1513222152.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:12.174Z,1513222152.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:12.329Z,1513222152.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:12.563Z,1513222152.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:12.583Z,1513222152.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:12.965Z,1513222152.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:13.050Z,1513222153.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:13.125Z,1513222153.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:13.364Z,1513222153.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:13.378Z,1513222153.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:13.529Z,1513222153.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:13.767Z,1513222153.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:13.818Z,1513222153.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:14.169Z,1513222154.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:14.191Z,1513222154.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:14.325Z,1513222154.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:14.569Z,1513222154.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:14.618Z,1513222154.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:14.968Z,1513222154.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:14.987Z,1513222154.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:15.121Z,1513222155.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:15.358Z,1513222155.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:15.386Z,1513222155.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:15.525Z,1513222155.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:15.767Z,1513222155.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:15.782Z,1513222155.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:16.168Z,1513222156.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:16.186Z,1513222156.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:16.321Z,1513222156.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:16.568Z,1513222156.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:16.583Z,1513222156.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:16.973Z,1513222156.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:16.988Z,1513222156.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:17.119Z,1513222157.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:17.381Z,1513222157.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:17.396Z,1513222157.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:17.546Z,1513222157.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:18.341Z,1513222158.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:19.138Z,1513222159.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:19.541Z,1513222159.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:20.337Z,1513222160.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:20.946Z,1513222160.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:20.976Z,1513222160.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:21.056Z,1513222161.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:21.085Z,1513222161.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:21.134Z,1513222161.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:21.438Z,1513222161.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:21.452Z,1513222161.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:21.537Z,1513222161.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:21.849Z,1513222161.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:21.863Z,1513222161.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:22.239Z,1513222162.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:22.253Z,1513222162.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:22.333Z,1513222162.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:22.632Z,1513222162.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:22.678Z,1513222162.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:23.030Z,1513222163.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:23.056Z,1513222163.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:23.129Z,1513222163.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:23.446Z,1513222163.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:23.481Z,1513222163.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:23.534Z,1513222163.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:23.846Z,1513222163.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:23.862Z,1513222163.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:24.250Z,1513222164.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:24.271Z,1513222164.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:24.329Z,1513222164.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:24.644Z,1513222164.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:24.660Z,1513222164.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:25.023Z,1513222165.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:25.047Z,1513222165.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:25.126Z,1513222165.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:25.422Z,1513222165.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:25.449Z,1513222165.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:25.529Z,1513222165.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:25.833Z,1513222165.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:25.859Z,1513222165.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:26.236Z,1513222166.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:26.252Z,1513222166.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:26.328Z,1513222166.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:26.648Z,1513222166.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:26.675Z,1513222166.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:27.061Z,1513222167.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:27.076Z,1513222167.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:27.125Z,1513222167.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:27.438Z,1513222167.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:27.464Z,1513222167.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:27.529Z,1513222167.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:27.833Z,1513222167.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:27.848Z,1513222167.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:28.230Z,1513222168.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:28.294Z,1513222168.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:28.325Z,1513222168.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:28.631Z,1513222168.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:28.650Z,1513222168.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:29.031Z,1513222169.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:29.046Z,1513222169.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:29.121Z,1513222169.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:29.426Z,1513222169.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:29.447Z,1513222169.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:29.525Z,1513222169.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:29.850Z,1513222169.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:29.901Z,1513222169.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:30.246Z,1513222170.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:30.267Z,1513222170.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:30.333Z,1513222170.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:30.646Z,1513222170.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:30.660Z,1513222170.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:31.037Z,1513222171.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:31.052Z,1513222171.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:31.131Z,1513222171.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:31.446Z,1513222171.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:31.460Z,1513222171.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:31.542Z,1513222171.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:31.824Z,1513222171.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:31.849Z,1513222171.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:32.223Z,1513222172.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:32.249Z,1513222172.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:32.337Z,1513222172.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:32.643Z,1513222172.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:32.658Z,1513222172.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:33.056Z,1513222173.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:33.135Z,1513222173.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:33.163Z,1513222173.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:33.436Z,1513222173.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:33.463Z,1513222173.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:33.549Z,1513222173.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:33.832Z,1513222173.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:33.848Z,1513222173.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:34.235Z,1513222174.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:34.251Z,1513222174.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:34.346Z,1513222174.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:34.637Z,1513222174.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:34.660Z,1513222174.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:35.034Z,1513222175.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:35.088Z,1513222175.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:35.141Z,1513222175.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:35.437Z,1513222175.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:35.452Z,1513222175.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:35.546Z,1513222175.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:35.843Z,1513222175.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:35.895Z,1513222175.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:36.248Z,1513222176.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:36.263Z,1513222176.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:36.341Z,1513222176.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:36.642Z,1513222176.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:36.659Z,1513222176.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:37.023Z,1513222177.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:37.048Z,1513222177.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:37.137Z,1513222177.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:37.421Z,1513222177.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:37.455Z,1513222177.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:37.541Z,1513222177.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:37.833Z,1513222177.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:37.852Z,1513222177.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:38.223Z,1513222178.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:38.251Z,1513222178.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:38.337Z,1513222178.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:38.642Z,1513222178.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:38.658Z,1513222178.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:39.045Z,1513222179.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:39.060Z,1513222179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:39.133Z,1513222179.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:39.438Z,1513222179.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:39.500Z,1513222179.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:39.537Z,1513222179.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:39.823Z,1513222179.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:39.860Z,1513222179.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:40.228Z,1513222180.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:40.254Z,1513222180.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:40.336Z,1513222180.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:40.623Z,1513222180.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:40.655Z,1513222180.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:41.023Z,1513222181.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:41.058Z,1513222181.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:41.129Z,1513222181.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:41.423Z,1513222181.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:41.458Z,1513222181.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:41.533Z,1513222181.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:41.846Z,1513222181.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:41.861Z,1513222181.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:42.247Z,1513222182.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:42.262Z,1513222182.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:42.329Z,1513222182.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:42.657Z,1513222182.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:42.692Z,1513222182.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:43.033Z,1513222183.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:43.048Z,1513222183.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:43.125Z,1513222183.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:43.433Z,1513222183.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:43.447Z,1513222183.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:43.529Z,1513222183.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:43.830Z,1513222183.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:43.845Z,1513222183.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:44.229Z,1513222184.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:44.283Z,1513222184.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:44.325Z,1513222184.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:44.646Z,1513222184.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:44.676Z,1513222184.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:45.066Z,1513222185.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:45.123Z,1513222185.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:45.159Z,1513222185.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:45.438Z,1513222185.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:45.452Z,1513222185.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:45.549Z,1513222185.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:45.833Z,1513222185.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:45.847Z,1513222185.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:46.228Z,1513222186.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:46.254Z,1513222186.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:46.346Z,1513222186.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:46.632Z,1513222186.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:46.658Z,1513222186.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:47.024Z,1513222187.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:47.060Z,1513222187.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:47.141Z,1513222187.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:47.432Z,1513222187.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:47.447Z,1513222187.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:47.546Z,1513222187.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:47.834Z,1513222187.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:47.855Z,1513222187.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:48.245Z,1513222188.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:48.259Z,1513222188.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:48.341Z,1513222188.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:48.634Z,1513222188.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:48.649Z,1513222188.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:49.068Z,1513222189.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:49.096Z,1513222189.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:49.138Z,1513222189.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:49.435Z,1513222189.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:49.452Z,1513222189.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:49.541Z,1513222189.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:49.835Z,1513222189.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:49.855Z,1513222189.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:50.232Z,1513222190.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:50.247Z,1513222190.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:50.337Z,1513222190.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:50.638Z,1513222190.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:50.654Z,1513222190.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:51.042Z,1513222191.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:51.057Z,1513222191.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:51.133Z,1513222191.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:51.436Z,1513222191.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:51.451Z,1513222191.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:51.537Z,1513222191.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:51.830Z,1513222191.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:51.861Z,1513222191.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:52.247Z,1513222192.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:52.287Z,1513222192.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:52.338Z,1513222192.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:52.631Z,1513222192.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:52.651Z,1513222192.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:53.032Z,1513222193.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:53.055Z,1513222193.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:53.133Z,1513222193.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:53.437Z,1513222193.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:53.452Z,1513222193.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:53.537Z,1513222193.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:53.841Z,1513222193.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:53.864Z,1513222193.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:54.247Z,1513222194.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:54.267Z,1513222194.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:54.267Z,1513222194.267 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2017-12-14T03:29:54.267Z,1513222194.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:29:54.268Z,1513222194.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:54.269Z,1513222194.269 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2017-12-14T03:29:54.269Z,1513222194.269 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:29:54.271Z,1513222194.271 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:54.271Z,1513222194.271 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2017-12-14T03:29:54.271Z,1513222194.271 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:29:54.317Z,1513222194.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:29:54.317Z,1513222194.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:29:54.318Z,1513222194.318 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:29:54.334Z,1513222194.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:54.641Z,1513222194.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:54.668Z,1513222194.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:29:54.668Z,1513222194.668 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2017-12-14T03:29:54.668Z,1513222194.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:29:54.668Z,1513222194.668 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2017-12-14T03:29:54.669Z,1513222194.669 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:29:54.669Z,1513222194.669 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2017-12-14T03:29:55.023Z,1513222195.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:55.076Z,1513222195.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:29:55.077Z,1513222195.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:29:55.077Z,1513222195.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:29:55.078Z,1513222195.078 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:29:55.078Z,1513222195.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:29:55.078Z,1513222195.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:29:55.079Z,1513222195.079 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:29:55.079Z,1513222195.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:29:55.079Z,1513222195.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:29:55.130Z,1513222195.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:55.435Z,1513222195.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:55.467Z,1513222195.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:55.534Z,1513222195.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:55.834Z,1513222195.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:55.895Z,1513222195.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:56.227Z,1513222196.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:56.244Z,1513222196.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:56.329Z,1513222196.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:56.646Z,1513222196.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:56.724Z,1513222196.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:57.059Z,1513222197.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:57.079Z,1513222197.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:57.126Z,1513222197.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:57.446Z,1513222197.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:57.499Z,1513222197.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:57.529Z,1513222197.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:57.827Z,1513222197.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:57.842Z,1513222197.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:58.225Z,1513222198.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:58.240Z,1513222198.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:58.325Z,1513222198.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:58.667Z,1513222198.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:58.698Z,1513222198.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:59.030Z,1513222199.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:59.046Z,1513222199.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:59.123Z,1513222199.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:59.423Z,1513222199.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:59.463Z,1513222199.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:29:59.538Z,1513222199.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:59.842Z,1513222199.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:29:59.867Z,1513222199.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:00.241Z,1513222200.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:00.263Z,1513222200.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:00.333Z,1513222200.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:00.638Z,1513222200.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:00.663Z,1513222200.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:01.032Z,1513222201.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:01.067Z,1513222201.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:01.131Z,1513222201.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:01.430Z,1513222201.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:01.446Z,1513222201.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:01.545Z,1513222201.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:01.885Z,1513222201.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:01.919Z,1513222201.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:02.232Z,1513222202.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:02.275Z,1513222202.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:02.341Z,1513222202.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:02.641Z,1513222202.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:02.656Z,1513222202.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:03.046Z,1513222203.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:03.076Z,1513222203.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:03.138Z,1513222203.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:03.450Z,1513222203.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:03.475Z,1513222203.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:03.541Z,1513222203.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:03.825Z,1513222203.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:03.843Z,1513222203.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:04.228Z,1513222204.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:04.243Z,1513222204.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:04.338Z,1513222204.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:04.633Z,1513222204.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:04.648Z,1513222204.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:05.069Z,1513222205.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:05.134Z,1513222205.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:05.138Z,1513222205.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:05.430Z,1513222205.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:05.451Z,1513222205.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:05.537Z,1513222205.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:05.838Z,1513222205.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:05.886Z,1513222205.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:06.237Z,1513222206.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:06.252Z,1513222206.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:06.333Z,1513222206.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:06.638Z,1513222206.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:06.653Z,1513222206.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:07.043Z,1513222207.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:07.079Z,1513222207.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:07.129Z,1513222207.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:07.428Z,1513222207.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:07.523Z,1513222207.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:07.533Z,1513222207.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:07.830Z,1513222207.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:07.850Z,1513222207.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:08.231Z,1513222208.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:08.287Z,1513222208.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:08.329Z,1513222208.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:08.642Z,1513222208.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:08.656Z,1513222208.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:09.046Z,1513222209.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:09.061Z,1513222209.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:09.125Z,1513222209.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:09.441Z,1513222209.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:09.471Z,1513222209.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:09.529Z,1513222209.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:09.823Z,1513222209.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:09.867Z,1513222209.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:10.221Z,1513222210.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:10.252Z,1513222210.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:10.325Z,1513222210.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:10.627Z,1513222210.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:10.652Z,1513222210.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:11.028Z,1513222211.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:11.055Z,1513222211.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:11.121Z,1513222211.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:11.486Z,1513222211.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:11.510Z,1513222211.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:11.525Z,1513222211.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:11.844Z,1513222211.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:11.859Z,1513222211.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:12.248Z,1513222212.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:12.263Z,1513222212.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:12.321Z,1513222212.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:12.648Z,1513222212.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:12.663Z,1513222212.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:13.023Z,1513222213.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:13.063Z,1513222213.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:13.119Z,1513222213.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:13.430Z,1513222213.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:13.451Z,1513222213.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:13.549Z,1513222213.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:13.832Z,1513222213.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:13.847Z,1513222213.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:14.232Z,1513222214.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:14.247Z,1513222214.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:14.346Z,1513222214.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:14.677Z,1513222214.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:14.705Z,1513222214.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:15.038Z,1513222215.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:15.052Z,1513222215.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:15.142Z,1513222215.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:15.441Z,1513222215.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:15.460Z,1513222215.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:15.549Z,1513222215.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:15.833Z,1513222215.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:15.861Z,1513222215.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:16.227Z,1513222216.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:16.251Z,1513222216.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:16.346Z,1513222216.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:16.622Z,1513222216.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:16.645Z,1513222216.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:16.648Z,1513222216.648 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T03:30:16.649Z,1513222216.649 [Default:CheckIn:C.Wait] Stopped
2017-12-14T03:30:16.649Z,1513222216.649 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T03:30:16.649Z,1513222216.649 [Default:CheckIn:D] Running Loop=1
2017-12-14T03:30:17.023Z,1513222217.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:17.064Z,1513222217.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:17.079Z,1513222217.079 [Default:CheckIn:D] Stopped
2017-12-14T03:30:17.079Z,1513222217.079 [Default:CheckIn:E] Running Loop=1
2017-12-14T03:30:17.141Z,1513222217.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:17.434Z,1513222217.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:17.458Z,1513222217.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:17.461Z,1513222217.461 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 177.028141 min 
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn:E] Stopped
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn] Stopped
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn](INFO): Running loop #18
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn] Running Loop=18
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T03:30:17.462Z,1513222217.462 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T03:30:17.546Z,1513222217.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:18.341Z,1513222218.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:19.137Z,1513222219.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:19.541Z,1513222219.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:20.337Z,1513222220.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:20.959Z,1513222220.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.067Z,1513222221.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:21.134Z,1513222221.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.160Z,1513222221.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.203Z,1513222221.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:21.537Z,1513222221.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.550Z,1513222221.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.569Z,1513222221.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:21.947Z,1513222221.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:21.963Z,1513222221.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:22.333Z,1513222222.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:22.338Z,1513222222.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:22.355Z,1513222222.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:22.755Z,1513222222.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:22.870Z,1513222222.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:23.130Z,1513222223.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:23.139Z,1513222223.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:23.156Z,1513222223.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:23.533Z,1513222223.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:23.543Z,1513222223.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:23.596Z,1513222223.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:23.945Z,1513222223.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:23.978Z,1513222223.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:24.329Z,1513222224.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:24.352Z,1513222224.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:24.410Z,1513222224.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:24.736Z,1513222224.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:24.753Z,1513222224.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:25.126Z,1513222225.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:25.129Z,1513222225.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:25.171Z,1513222225.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:25.529Z,1513222225.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:25.554Z,1513222225.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:25.568Z,1513222225.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:25.941Z,1513222225.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:25.976Z,1513222225.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:26.326Z,1513222226.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:26.354Z,1513222226.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:26.368Z,1513222226.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:26.732Z,1513222226.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:26.760Z,1513222226.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:27.123Z,1513222227.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:27.169Z,1513222227.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:27.209Z,1513222227.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:27.542Z,1513222227.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:27.556Z,1513222227.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:27.587Z,1513222227.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:27.964Z,1513222227.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:27.980Z,1513222227.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:28.337Z,1513222228.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:28.347Z,1513222228.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:28.372Z,1513222228.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:28.743Z,1513222228.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:28.772Z,1513222228.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:29.135Z,1513222229.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:29.149Z,1513222229.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:29.164Z,1513222229.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:29.542Z,1513222229.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:29.563Z,1513222229.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:29.929Z,1513222229.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:29.943Z,1513222229.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:29.958Z,1513222229.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:30.333Z,1513222230.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:30.351Z,1513222230.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:30.386Z,1513222230.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:30.801Z,1513222230.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:30.857Z,1513222230.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:31.130Z,1513222231.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:31.135Z,1513222231.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:31.151Z,1513222231.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:31.533Z,1513222231.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:31.547Z,1513222231.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:31.573Z,1513222231.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:31.946Z,1513222231.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:32.018Z,1513222232.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:32.330Z,1513222232.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:32.343Z,1513222232.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:32.375Z,1513222232.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:32.751Z,1513222232.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:32.828Z,1513222232.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:33.125Z,1513222233.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:33.139Z,1513222233.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:33.154Z,1513222233.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:33.529Z,1513222233.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:33.543Z,1513222233.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:33.563Z,1513222233.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:33.984Z,1513222233.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:34.095Z,1513222234.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:34.325Z,1513222234.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:34.344Z,1513222234.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:34.367Z,1513222234.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:34.786Z,1513222234.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:34.880Z,1513222234.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:35.121Z,1513222235.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:35.143Z,1513222235.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:35.172Z,1513222235.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:35.525Z,1513222235.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:35.547Z,1513222235.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:35.574Z,1513222235.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:35.946Z,1513222235.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:35.961Z,1513222235.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:36.322Z,1513222236.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:36.354Z,1513222236.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:36.368Z,1513222236.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:36.774Z,1513222236.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:36.845Z,1513222236.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:37.117Z,1513222237.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:37.130Z,1513222237.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:37.211Z,1513222237.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:37.524Z,1513222237.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:37.538Z,1513222237.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:37.567Z,1513222237.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:37.938Z,1513222237.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:37.972Z,1513222237.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:38.317Z,1513222238.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:38.339Z,1513222238.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:38.373Z,1513222238.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:38.728Z,1513222238.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:38.768Z,1513222238.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:39.113Z,1513222239.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:39.135Z,1513222239.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:39.151Z,1513222239.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:39.517Z,1513222239.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:39.547Z,1513222239.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:39.570Z,1513222239.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:39.944Z,1513222239.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:39.960Z,1513222239.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:40.313Z,1513222240.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:40.363Z,1513222240.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:40.398Z,1513222240.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:40.741Z,1513222240.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:40.757Z,1513222240.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:41.111Z,1513222241.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:41.179Z,1513222241.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:41.219Z,1513222241.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:41.549Z,1513222241.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:41.550Z,1513222241.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:41.568Z,1513222241.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:41.948Z,1513222241.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:41.963Z,1513222241.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:42.346Z,1513222242.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:42.347Z,1513222242.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:42.362Z,1513222242.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:42.734Z,1513222242.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:42.791Z,1513222242.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:43.142Z,1513222243.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:43.163Z,1513222243.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:43.202Z,1513222243.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:43.539Z,1513222243.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:43.573Z,1513222243.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:43.615Z,1513222243.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:43.951Z,1513222243.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:43.966Z,1513222243.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:44.349Z,1513222244.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:44.369Z,1513222244.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:44.412Z,1513222244.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:44.731Z,1513222244.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:44.840Z,1513222244.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:45.132Z,1513222245.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:45.170Z,1513222245.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:45.182Z,1513222245.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:45.532Z,1513222245.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:45.562Z,1513222245.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:45.573Z,1513222245.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:45.943Z,1513222245.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:46.010Z,1513222246.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:46.338Z,1513222246.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:46.356Z,1513222246.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:46.369Z,1513222246.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:46.807Z,1513222246.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:46.842Z,1513222246.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:47.137Z,1513222247.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:47.159Z,1513222247.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:47.166Z,1513222247.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:47.535Z,1513222247.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:47.551Z,1513222247.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:47.569Z,1513222247.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:47.936Z,1513222247.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:47.951Z,1513222247.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:48.342Z,1513222248.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:48.358Z,1513222248.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:48.365Z,1513222248.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:48.744Z,1513222248.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:48.820Z,1513222248.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:49.146Z,1513222249.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:49.161Z,1513222249.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:49.180Z,1513222249.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:49.546Z,1513222249.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:49.565Z,1513222249.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:49.579Z,1513222249.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:49.938Z,1513222249.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:49.953Z,1513222249.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:50.336Z,1513222250.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:50.351Z,1513222250.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:50.361Z,1513222250.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:50.747Z,1513222250.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:50.862Z,1513222250.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:51.131Z,1513222251.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:51.154Z,1513222251.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:51.157Z,1513222251.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:51.529Z,1513222251.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:51.560Z,1513222251.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:51.561Z,1513222251.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:51.948Z,1513222251.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:51.963Z,1513222251.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:52.350Z,1513222252.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:52.357Z,1513222252.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:52.365Z,1513222252.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:52.746Z,1513222252.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:52.761Z,1513222252.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:53.143Z,1513222253.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:53.153Z,1513222253.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:53.175Z,1513222253.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:53.536Z,1513222253.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:53.552Z,1513222253.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:53.557Z,1513222253.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:53.936Z,1513222253.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:53.951Z,1513222253.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:54.334Z,1513222254.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:54.353Z,1513222254.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:54.391Z,1513222254.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:54.738Z,1513222254.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:54.753Z,1513222254.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:55.149Z,1513222255.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:55.190Z,1513222255.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:55.230Z,1513222255.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:55.547Z,1513222255.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:55.553Z,1513222255.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:55.563Z,1513222255.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:55.944Z,1513222255.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:55.961Z,1513222255.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:56.349Z,1513222256.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:56.359Z,1513222256.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:56.410Z,1513222256.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:56.724Z,1513222256.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:56.760Z,1513222256.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:57.146Z,1513222257.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:57.166Z,1513222257.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:57.184Z,1513222257.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:57.527Z,1513222257.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:57.556Z,1513222257.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:57.938Z,1513222257.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:57.941Z,1513222257.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:57.979Z,1513222257.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:58.342Z,1513222258.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:58.346Z,1513222258.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:58.367Z,1513222258.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:58.774Z,1513222258.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:58.845Z,1513222258.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:59.132Z,1513222259.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:59.141Z,1513222259.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:59.150Z,1513222259.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:59.546Z,1513222259.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:59.579Z,1513222259.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:59.618Z,1513222259.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:30:59.935Z,1513222259.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:30:59.952Z,1513222259.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:00.336Z,1513222260.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:00.342Z,1513222260.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:00.354Z,1513222260.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:00.755Z,1513222260.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:00.838Z,1513222260.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:01.140Z,1513222261.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:01.144Z,1513222261.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:01.161Z,1513222261.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:01.542Z,1513222261.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:01.546Z,1513222261.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:01.560Z,1513222261.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:01.938Z,1513222261.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:01.975Z,1513222261.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:02.332Z,1513222262.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:02.341Z,1513222262.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:02.348Z,1513222262.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:02.827Z,1513222262.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:02.851Z,1513222262.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:03.138Z,1513222263.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:03.148Z,1513222263.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:03.162Z,1513222263.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:03.536Z,1513222263.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:03.552Z,1513222263.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:03.934Z,1513222263.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:03.948Z,1513222263.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:03.963Z,1513222263.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:04.338Z,1513222264.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:04.349Z,1513222264.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:04.364Z,1513222264.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:04.792Z,1513222264.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:04.846Z,1513222264.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:05.133Z,1513222265.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:05.150Z,1513222265.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:05.174Z,1513222265.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:05.538Z,1513222265.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:05.542Z,1513222265.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:05.563Z,1513222265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:05.930Z,1513222265.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:05.963Z,1513222265.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:06.331Z,1513222266.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:06.341Z,1513222266.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:06.423Z,1513222266.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:06.749Z,1513222266.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:06.781Z,1513222266.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:07.137Z,1513222267.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:07.152Z,1513222267.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:07.199Z,1513222267.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:07.541Z,1513222267.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:07.547Z,1513222267.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:07.567Z,1513222267.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:07.944Z,1513222267.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:07.994Z,1513222267.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:08.334Z,1513222268.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:08.337Z,1513222268.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:08.351Z,1513222268.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:08.733Z,1513222268.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:08.748Z,1513222268.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:09.135Z,1513222269.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:09.171Z,1513222269.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:09.211Z,1513222269.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:09.528Z,1513222269.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:09.546Z,1513222269.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:09.559Z,1513222269.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:09.953Z,1513222269.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:09.999Z,1513222269.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:10.341Z,1513222270.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:10.343Z,1513222270.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:10.375Z,1513222270.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:10.746Z,1513222270.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:10.778Z,1513222270.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:11.138Z,1513222271.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:11.190Z,1513222271.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:11.229Z,1513222271.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:11.548Z,1513222271.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:11.560Z,1513222271.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:11.583Z,1513222271.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:11.938Z,1513222271.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:11.959Z,1513222271.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:12.333Z,1513222272.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:12.341Z,1513222272.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:12.359Z,1513222272.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:12.727Z,1513222272.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:12.813Z,1513222272.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:13.138Z,1513222273.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:13.178Z,1513222273.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:13.217Z,1513222273.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:13.542Z,1513222273.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:13.546Z,1513222273.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:13.582Z,1513222273.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:13.938Z,1513222273.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:13.953Z,1513222273.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:14.336Z,1513222274.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:14.337Z,1513222274.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:14.352Z,1513222274.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:14.734Z,1513222274.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:14.831Z,1513222274.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:15.133Z,1513222275.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:15.136Z,1513222275.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:15.163Z,1513222275.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:15.537Z,1513222275.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:15.538Z,1513222275.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:15.559Z,1513222275.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:15.952Z,1513222275.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:15.966Z,1513222275.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:16.333Z,1513222276.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:16.387Z,1513222276.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:16.495Z,1513222276.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:16.776Z,1513222276.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:16.859Z,1513222276.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:17.130Z,1513222277.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:17.132Z,1513222277.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:17.187Z,1513222277.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:17.534Z,1513222277.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:17.536Z,1513222277.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:17.573Z,1513222277.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:18.329Z,1513222278.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:19.127Z,1513222279.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:19.529Z,1513222279.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:20.326Z,1513222280.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:21.122Z,1513222281.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:21.525Z,1513222281.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:22.322Z,1513222282.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:23.119Z,1513222283.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:23.554Z,1513222283.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:24.349Z,1513222284.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.062Z,1513222285.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.146Z,1513222285.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.173Z,1513222285.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:25.248Z,1513222285.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.319Z,1513222285.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:25.549Z,1513222285.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.678Z,1513222285.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:25.701Z,1513222285.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:26.106Z,1513222286.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:26.137Z,1513222286.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:26.346Z,1513222286.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:26.468Z,1513222286.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:26.519Z,1513222286.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:26.866Z,1513222286.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:26.908Z,1513222286.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:27.141Z,1513222287.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:27.262Z,1513222287.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:27.315Z,1513222287.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:27.546Z,1513222287.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:27.651Z,1513222287.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:27.666Z,1513222287.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:28.060Z,1513222288.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:28.082Z,1513222288.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:28.344Z,1513222288.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:28.466Z,1513222288.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:28.564Z,1513222288.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:28.871Z,1513222288.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:28.911Z,1513222288.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:29.138Z,1513222289.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:29.263Z,1513222289.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:29.323Z,1513222289.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:29.542Z,1513222289.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:29.681Z,1513222289.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:29.723Z,1513222289.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:30.044Z,1513222290.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:30.131Z,1513222290.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:30.338Z,1513222290.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:30.464Z,1513222290.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:30.487Z,1513222290.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:30.873Z,1513222290.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:30.920Z,1513222290.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:31.134Z,1513222291.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:31.283Z,1513222291.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:31.327Z,1513222291.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:31.538Z,1513222291.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:31.675Z,1513222291.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:31.749Z,1513222291.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:32.080Z,1513222292.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:32.122Z,1513222292.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:32.333Z,1513222292.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:32.444Z,1513222292.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:32.531Z,1513222292.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:32.884Z,1513222292.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:32.934Z,1513222292.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:33.130Z,1513222293.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:33.277Z,1513222293.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:33.362Z,1513222293.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:33.533Z,1513222293.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:33.645Z,1513222293.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:33.720Z,1513222293.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:34.056Z,1513222294.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:34.095Z,1513222294.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:34.330Z,1513222294.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:34.476Z,1513222294.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:34.537Z,1513222294.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:34.887Z,1513222294.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:34.940Z,1513222294.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:35.126Z,1513222295.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:35.253Z,1513222295.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:35.302Z,1513222295.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:35.530Z,1513222295.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:35.648Z,1513222295.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:35.667Z,1513222295.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:36.049Z,1513222296.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:36.068Z,1513222296.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:36.326Z,1513222296.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:36.477Z,1513222296.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:36.566Z,1513222296.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:36.866Z,1513222296.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:36.910Z,1513222296.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:37.127Z,1513222297.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:37.273Z,1513222297.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:37.333Z,1513222297.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:37.557Z,1513222297.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:37.682Z,1513222297.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:37.703Z,1513222297.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:38.067Z,1513222298.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:38.101Z,1513222298.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:38.353Z,1513222298.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:38.436Z,1513222298.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:38.480Z,1513222298.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:38.843Z,1513222298.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:38.878Z,1513222298.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:39.150Z,1513222299.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:39.251Z,1513222299.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:39.292Z,1513222299.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:39.553Z,1513222299.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:39.643Z,1513222299.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:39.696Z,1513222299.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:40.069Z,1513222300.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:40.085Z,1513222300.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:40.349Z,1513222300.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:40.474Z,1513222300.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:40.497Z,1513222300.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:40.854Z,1513222300.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:40.888Z,1513222300.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:41.146Z,1513222301.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:41.251Z,1513222301.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:41.283Z,1513222301.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:41.549Z,1513222301.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:41.652Z,1513222301.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:41.687Z,1513222301.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:42.051Z,1513222302.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:42.092Z,1513222302.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:42.346Z,1513222302.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:42.450Z,1513222302.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:42.464Z,1513222302.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:42.867Z,1513222302.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:42.895Z,1513222302.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:43.141Z,1513222303.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:43.270Z,1513222303.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:43.300Z,1513222303.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:43.546Z,1513222303.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:43.665Z,1513222303.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:43.700Z,1513222303.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:44.062Z,1513222304.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:44.103Z,1513222304.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:44.341Z,1513222304.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:44.451Z,1513222304.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:44.472Z,1513222304.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:44.856Z,1513222304.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:44.870Z,1513222304.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:45.137Z,1513222305.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:45.259Z,1513222305.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:45.279Z,1513222305.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:45.541Z,1513222305.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:45.656Z,1513222305.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:45.678Z,1513222305.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:46.083Z,1513222306.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:46.123Z,1513222306.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:46.339Z,1513222306.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:46.468Z,1513222306.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:46.527Z,1513222306.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:46.860Z,1513222306.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:46.875Z,1513222306.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:47.134Z,1513222307.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:47.254Z,1513222307.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:47.270Z,1513222307.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:47.662Z,1513222307.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:47.677Z,1513222307.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:47.929Z,1513222307.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:48.056Z,1513222308.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:48.072Z,1513222308.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:48.450Z,1513222308.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:48.478Z,1513222308.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:48.725Z,1513222308.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:48.867Z,1513222308.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:48.903Z,1513222308.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:49.315Z,1513222309.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:49.359Z,1513222309.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:49.521Z,1513222309.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:49.666Z,1513222309.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:49.710Z,1513222309.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:50.065Z,1513222310.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:50.088Z,1513222310.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:50.317Z,1513222310.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:50.452Z,1513222310.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:50.519Z,1513222310.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:50.855Z,1513222310.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:50.875Z,1513222310.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:51.115Z,1513222311.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:51.256Z,1513222311.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:51.310Z,1513222311.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:51.651Z,1513222311.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:51.666Z,1513222311.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:51.909Z,1513222311.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:52.058Z,1513222312.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:52.106Z,1513222312.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:52.480Z,1513222312.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:52.531Z,1513222312.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:52.705Z,1513222312.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:52.856Z,1513222312.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:52.879Z,1513222312.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:53.250Z,1513222313.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:53.264Z,1513222313.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:53.501Z,1513222313.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:53.646Z,1513222313.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:53.670Z,1513222313.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:54.055Z,1513222314.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:54.075Z,1513222314.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:54.297Z,1513222314.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:54.453Z,1513222314.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:54.467Z,1513222314.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:54.852Z,1513222314.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:54.866Z,1513222314.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:55.093Z,1513222315.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:55.260Z,1513222315.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:55.283Z,1513222315.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:55.682Z,1513222315.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:55.716Z,1513222315.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:55.893Z,1513222315.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:56.062Z,1513222316.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:56.076Z,1513222316.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:56.451Z,1513222316.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:56.467Z,1513222316.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:56.691Z,1513222316.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:56.854Z,1513222316.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:56.880Z,1513222316.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:57.262Z,1513222317.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:57.276Z,1513222317.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:57.485Z,1513222317.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:57.654Z,1513222317.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:57.675Z,1513222317.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:58.060Z,1513222318.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:58.075Z,1513222318.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:58.282Z,1513222318.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:58.462Z,1513222318.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:58.499Z,1513222318.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:58.867Z,1513222318.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:58.900Z,1513222318.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:59.078Z,1513222319.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:59.243Z,1513222319.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:59.278Z,1513222319.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:59.640Z,1513222319.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:31:59.663Z,1513222319.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:31:59.873Z,1513222319.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:00.047Z,1513222320.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:00.088Z,1513222320.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:00.448Z,1513222320.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:00.510Z,1513222320.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:00.669Z,1513222320.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:00.854Z,1513222320.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:00.885Z,1513222320.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:01.258Z,1513222321.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:01.293Z,1513222321.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:01.467Z,1513222321.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:01.662Z,1513222321.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:01.707Z,1513222321.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:02.054Z,1513222322.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:02.137Z,1513222322.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:02.262Z,1513222322.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:02.464Z,1513222322.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:02.505Z,1513222322.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:02.873Z,1513222322.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:02.908Z,1513222322.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:03.057Z,1513222323.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:03.251Z,1513222323.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:03.282Z,1513222323.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:03.657Z,1513222323.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:03.672Z,1513222323.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:03.853Z,1513222323.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:04.065Z,1513222324.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:04.080Z,1513222324.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:04.463Z,1513222324.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:04.477Z,1513222324.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:04.649Z,1513222324.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:04.866Z,1513222324.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:04.889Z,1513222324.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:05.271Z,1513222325.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:05.322Z,1513222325.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:05.445Z,1513222325.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:05.643Z,1513222325.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:05.668Z,1513222325.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:06.047Z,1513222326.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:06.139Z,1513222326.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:06.241Z,1513222326.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:06.442Z,1513222326.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:06.475Z,1513222326.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:06.847Z,1513222326.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:06.873Z,1513222326.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:07.037Z,1513222327.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:07.259Z,1513222327.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:07.288Z,1513222327.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:07.669Z,1513222327.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:07.692Z,1513222327.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:07.833Z,1513222327.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:08.062Z,1513222328.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:08.083Z,1513222328.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:08.463Z,1513222328.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:08.499Z,1513222328.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:08.630Z,1513222328.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:08.844Z,1513222328.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:08.879Z,1513222328.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:09.248Z,1513222329.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:09.282Z,1513222329.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:09.425Z,1513222329.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:09.690Z,1513222329.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:09.721Z,1513222329.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:10.066Z,1513222330.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:10.099Z,1513222330.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:10.221Z,1513222330.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:10.470Z,1513222330.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:10.507Z,1513222330.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:10.855Z,1513222330.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:10.892Z,1513222330.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:11.006Z,1513222331.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:11.248Z,1513222331.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:11.288Z,1513222331.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:11.409Z,1513222331.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:11.685Z,1513222331.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:11.716Z,1513222331.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:11.813Z,1513222331.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.050Z,1513222332.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.081Z,1513222332.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:12.220Z,1513222332.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.523Z,1513222332.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.625Z,1513222332.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.630Z,1513222332.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:12.857Z,1513222332.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:12.891Z,1513222332.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:13.029Z,1513222333.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:13.265Z,1513222333.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:13.330Z,1513222333.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:13.433Z,1513222333.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:13.662Z,1513222333.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:13.688Z,1513222333.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:13.837Z,1513222333.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.054Z,1513222334.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.103Z,1513222334.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:14.241Z,1513222334.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.448Z,1513222334.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.462Z,1513222334.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:14.645Z,1513222334.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.867Z,1513222334.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:14.899Z,1513222334.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:15.050Z,1513222335.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:15.253Z,1513222335.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:15.347Z,1513222335.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:15.453Z,1513222335.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:15.652Z,1513222335.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:15.675Z,1513222335.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:15.857Z,1513222335.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.053Z,1513222336.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.068Z,1513222336.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:16.261Z,1513222336.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.457Z,1513222336.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.505Z,1513222336.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:16.665Z,1513222336.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.903Z,1513222336.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:16.919Z,1513222336.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:17.255Z,1513222337.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:17.261Z,1513222337.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:17.300Z,1513222337.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:17.654Z,1513222337.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:17.668Z,1513222337.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:18.057Z,1513222338.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:18.853Z,1513222338.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:19.549Z,1513222339.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:20.346Z,1513222340.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.141Z,1513222341.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.310Z,1513222341.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.325Z,1513222341.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:21.419Z,1513222341.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.458Z,1513222341.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:21.546Z,1513222341.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.805Z,1513222341.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:21.827Z,1513222341.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:22.212Z,1513222342.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:22.298Z,1513222342.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:22.353Z,1513222342.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:22.605Z,1513222342.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:22.620Z,1513222342.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:22.988Z,1513222342.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:23.014Z,1513222343.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:23.149Z,1513222343.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:23.401Z,1513222343.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:23.416Z,1513222343.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:23.553Z,1513222343.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:23.787Z,1513222343.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:23.815Z,1513222343.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:24.188Z,1513222344.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:24.213Z,1513222344.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:24.349Z,1513222344.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:24.585Z,1513222344.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:24.611Z,1513222344.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:25.007Z,1513222345.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:25.021Z,1513222345.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:25.146Z,1513222345.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:25.417Z,1513222345.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:25.440Z,1513222345.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:25.550Z,1513222345.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:25.808Z,1513222345.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:25.827Z,1513222345.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:26.191Z,1513222346.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:26.223Z,1513222346.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:26.346Z,1513222346.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:26.591Z,1513222346.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:26.628Z,1513222346.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:26.987Z,1513222346.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:27.020Z,1513222347.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:27.146Z,1513222347.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:27.387Z,1513222347.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:27.419Z,1513222347.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:27.549Z,1513222347.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:27.814Z,1513222347.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:27.828Z,1513222347.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:28.210Z,1513222348.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:28.235Z,1513222348.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:28.348Z,1513222348.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:28.621Z,1513222348.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:28.648Z,1513222348.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:28.987Z,1513222348.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:29.010Z,1513222349.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:29.142Z,1513222349.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:29.387Z,1513222349.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:29.427Z,1513222349.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:29.546Z,1513222349.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:29.795Z,1513222349.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:29.827Z,1513222349.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:30.204Z,1513222350.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:30.228Z,1513222350.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:30.341Z,1513222350.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:30.593Z,1513222350.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:30.627Z,1513222350.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:30.998Z,1513222350.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:31.026Z,1513222351.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:31.137Z,1513222351.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:31.422Z,1513222351.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:31.436Z,1513222351.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:31.541Z,1513222351.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:31.801Z,1513222351.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:31.832Z,1513222351.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:32.193Z,1513222352.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:32.208Z,1513222352.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:32.337Z,1513222352.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:32.595Z,1513222352.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:32.610Z,1513222352.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:32.994Z,1513222352.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:33.042Z,1513222353.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:33.134Z,1513222353.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:33.387Z,1513222353.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:33.419Z,1513222353.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:33.544Z,1513222353.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:33.805Z,1513222353.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:33.822Z,1513222353.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:34.201Z,1513222354.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:34.291Z,1513222354.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:34.338Z,1513222354.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:34.598Z,1513222354.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:34.613Z,1513222354.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:34.998Z,1513222354.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:35.056Z,1513222355.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:35.134Z,1513222355.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:35.405Z,1513222355.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:35.419Z,1513222355.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:35.546Z,1513222355.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:35.799Z,1513222355.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:35.854Z,1513222355.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:36.196Z,1513222356.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:36.211Z,1513222356.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:36.342Z,1513222356.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:36.596Z,1513222356.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:36.611Z,1513222356.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:37.004Z,1513222357.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:37.032Z,1513222357.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:37.137Z,1513222357.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:37.417Z,1513222357.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:37.432Z,1513222357.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:37.541Z,1513222357.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:37.811Z,1513222357.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:37.825Z,1513222357.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:38.190Z,1513222358.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:38.213Z,1513222358.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:38.340Z,1513222358.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:38.595Z,1513222358.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:38.613Z,1513222358.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:38.998Z,1513222358.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:39.023Z,1513222359.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:39.133Z,1513222359.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:39.420Z,1513222359.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:39.460Z,1513222359.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:39.537Z,1513222359.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:39.799Z,1513222359.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:39.820Z,1513222359.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:40.209Z,1513222360.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:40.238Z,1513222360.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:40.333Z,1513222360.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:40.602Z,1513222360.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:40.630Z,1513222360.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:40.996Z,1513222360.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:41.020Z,1513222361.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:41.129Z,1513222361.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:41.390Z,1513222361.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:41.433Z,1513222361.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:41.533Z,1513222361.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:41.794Z,1513222361.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:41.810Z,1513222361.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:42.197Z,1513222362.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:42.212Z,1513222362.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:42.329Z,1513222362.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:42.595Z,1513222362.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:42.609Z,1513222362.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:42.998Z,1513222362.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:43.019Z,1513222363.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:43.128Z,1513222363.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:43.410Z,1513222363.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:43.441Z,1513222363.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:43.533Z,1513222363.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:43.802Z,1513222363.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:43.823Z,1513222363.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:44.194Z,1513222364.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:44.247Z,1513222364.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:44.332Z,1513222364.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:44.594Z,1513222364.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:44.609Z,1513222364.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:44.997Z,1513222364.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:45.011Z,1513222365.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:45.125Z,1513222365.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:45.391Z,1513222365.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:45.418Z,1513222365.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:45.529Z,1513222365.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:45.808Z,1513222365.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:45.823Z,1513222365.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:46.209Z,1513222366.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:46.231Z,1513222366.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:46.325Z,1513222366.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:46.598Z,1513222366.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:46.634Z,1513222366.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:46.986Z,1513222366.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:47.011Z,1513222367.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:47.123Z,1513222367.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:47.387Z,1513222367.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:47.423Z,1513222367.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:47.533Z,1513222367.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:47.785Z,1513222367.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:47.800Z,1513222367.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:48.192Z,1513222368.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:48.230Z,1513222368.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:48.329Z,1513222368.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:48.590Z,1513222368.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:48.630Z,1513222368.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:48.993Z,1513222368.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:49.107Z,1513222369.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:49.127Z,1513222369.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:49.401Z,1513222369.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:49.416Z,1513222369.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:49.581Z,1513222369.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:49.800Z,1513222369.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:49.814Z,1513222369.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:50.191Z,1513222370.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:50.214Z,1513222370.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:50.377Z,1513222370.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:50.595Z,1513222370.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:50.609Z,1513222370.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:50.996Z,1513222370.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:51.015Z,1513222371.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:51.173Z,1513222371.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:51.395Z,1513222371.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:51.410Z,1513222371.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:51.577Z,1513222371.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:51.805Z,1513222371.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:51.820Z,1513222371.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:52.207Z,1513222372.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:52.222Z,1513222372.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:52.373Z,1513222372.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:52.606Z,1513222372.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:52.621Z,1513222372.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:53.006Z,1513222373.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:53.027Z,1513222373.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:53.170Z,1513222373.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:53.395Z,1513222373.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:53.419Z,1513222373.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:53.573Z,1513222373.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:53.795Z,1513222373.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:53.815Z,1513222373.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:54.195Z,1513222374.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:54.211Z,1513222374.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:54.369Z,1513222374.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:54.600Z,1513222374.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:54.615Z,1513222374.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:55.005Z,1513222375.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:55.021Z,1513222375.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:55.165Z,1513222375.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:55.406Z,1513222375.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:55.422Z,1513222375.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:55.422Z,1513222375.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2017-12-14T03:32:55.422Z,1513222375.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:32:55.424Z,1513222375.424 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:55.424Z,1513222375.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2017-12-14T03:32:55.424Z,1513222375.424 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:32:55.426Z,1513222375.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:55.426Z,1513222375.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2017-12-14T03:32:55.426Z,1513222375.426 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:32:55.451Z,1513222375.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:32:55.451Z,1513222375.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:32:55.451Z,1513222375.451 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:32:55.569Z,1513222375.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:55.799Z,1513222375.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:55.861Z,1513222375.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:32:55.861Z,1513222375.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2017-12-14T03:32:55.861Z,1513222375.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:32:55.861Z,1513222375.861 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2017-12-14T03:32:55.862Z,1513222375.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:32:55.862Z,1513222375.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2017-12-14T03:32:56.198Z,1513222376.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:56.294Z,1513222376.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:32:56.294Z,1513222376.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:32:56.295Z,1513222376.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:32:56.295Z,1513222376.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:32:56.295Z,1513222376.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:32:56.296Z,1513222376.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:32:56.296Z,1513222376.296 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:32:56.305Z,1513222376.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:32:56.305Z,1513222376.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:32:56.366Z,1513222376.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:56.601Z,1513222376.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:56.648Z,1513222376.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:56.993Z,1513222376.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:57.026Z,1513222377.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:57.165Z,1513222377.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:57.395Z,1513222377.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:57.435Z,1513222377.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:57.569Z,1513222377.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:57.804Z,1513222377.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:57.827Z,1513222377.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:58.217Z,1513222378.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:58.255Z,1513222378.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:58.365Z,1513222378.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:58.601Z,1513222378.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:58.631Z,1513222378.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:58.994Z,1513222378.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:59.023Z,1513222379.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:59.164Z,1513222379.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:59.393Z,1513222379.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:59.408Z,1513222379.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:32:59.569Z,1513222379.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:59.791Z,1513222379.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:32:59.819Z,1513222379.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:00.187Z,1513222380.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:00.224Z,1513222380.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:00.365Z,1513222380.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:00.591Z,1513222380.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:00.623Z,1513222380.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:01.009Z,1513222381.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:01.024Z,1513222381.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:01.162Z,1513222381.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:01.426Z,1513222381.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:01.440Z,1513222381.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:01.565Z,1513222381.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:01.814Z,1513222381.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:01.828Z,1513222381.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:02.195Z,1513222382.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:02.225Z,1513222382.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:02.361Z,1513222382.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:02.634Z,1513222382.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:02.686Z,1513222382.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:02.996Z,1513222382.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:03.024Z,1513222383.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:03.158Z,1513222383.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:03.396Z,1513222383.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:03.415Z,1513222383.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:03.561Z,1513222383.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:03.809Z,1513222383.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:03.836Z,1513222383.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:04.210Z,1513222384.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:04.240Z,1513222384.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:04.357Z,1513222384.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:04.594Z,1513222384.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:04.608Z,1513222384.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:04.996Z,1513222384.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:05.015Z,1513222385.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:05.153Z,1513222385.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:05.394Z,1513222385.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:05.413Z,1513222385.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:05.557Z,1513222385.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:05.826Z,1513222385.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:05.897Z,1513222385.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:06.198Z,1513222386.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:06.212Z,1513222386.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:06.353Z,1513222386.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:06.597Z,1513222386.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:06.646Z,1513222386.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:06.998Z,1513222386.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:07.014Z,1513222387.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:07.149Z,1513222387.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:07.401Z,1513222387.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:07.416Z,1513222387.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:07.553Z,1513222387.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:07.810Z,1513222387.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:07.842Z,1513222387.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:08.197Z,1513222388.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:08.212Z,1513222388.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:08.350Z,1513222388.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:08.595Z,1513222388.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:08.610Z,1513222388.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:09.011Z,1513222389.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:09.047Z,1513222389.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:09.146Z,1513222389.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:09.394Z,1513222389.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:09.410Z,1513222389.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:09.549Z,1513222389.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:09.804Z,1513222389.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:09.819Z,1513222389.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:10.205Z,1513222390.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:10.220Z,1513222390.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:10.346Z,1513222390.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:10.605Z,1513222390.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:10.620Z,1513222390.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:10.997Z,1513222390.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:11.019Z,1513222391.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:11.141Z,1513222391.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:11.397Z,1513222391.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:11.412Z,1513222391.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:11.546Z,1513222391.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:11.794Z,1513222391.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:11.810Z,1513222391.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:12.230Z,1513222392.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:12.282Z,1513222392.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:12.341Z,1513222392.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:12.591Z,1513222392.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:12.616Z,1513222392.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:13.005Z,1513222393.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:13.020Z,1513222393.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:13.138Z,1513222393.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:13.406Z,1513222393.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:13.433Z,1513222393.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:13.541Z,1513222393.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:13.811Z,1513222393.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:13.826Z,1513222393.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:14.191Z,1513222394.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:14.223Z,1513222394.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:14.337Z,1513222394.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:14.586Z,1513222394.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:14.618Z,1513222394.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:14.991Z,1513222394.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:15.022Z,1513222395.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:15.134Z,1513222395.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:15.469Z,1513222395.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:15.484Z,1513222395.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:15.537Z,1513222395.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:15.806Z,1513222395.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:15.829Z,1513222395.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:16.207Z,1513222396.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:16.237Z,1513222396.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:16.333Z,1513222396.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:16.607Z,1513222396.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:16.631Z,1513222396.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:16.994Z,1513222396.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:17.020Z,1513222397.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:17.131Z,1513222397.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:17.392Z,1513222397.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:17.423Z,1513222397.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:17.537Z,1513222397.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:17.801Z,1513222397.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:17.816Z,1513222397.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:18.333Z,1513222398.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:19.130Z,1513222399.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:19.533Z,1513222399.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:20.329Z,1513222400.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.126Z,1513222401.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.295Z,1513222401.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.367Z,1513222401.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:21.468Z,1513222401.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.508Z,1513222401.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:21.530Z,1513222401.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.854Z,1513222401.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:21.906Z,1513222401.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:22.253Z,1513222402.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:22.326Z,1513222402.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:22.352Z,1513222402.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:22.651Z,1513222402.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:22.674Z,1513222402.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:23.039Z,1513222403.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:23.084Z,1513222403.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:23.121Z,1513222403.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:23.441Z,1513222403.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:23.455Z,1513222403.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:23.525Z,1513222403.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:23.837Z,1513222403.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:23.852Z,1513222403.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:24.241Z,1513222404.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:24.256Z,1513222404.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:24.321Z,1513222404.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:24.634Z,1513222404.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:24.648Z,1513222404.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:25.059Z,1513222405.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:25.087Z,1513222405.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:25.117Z,1513222405.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:25.456Z,1513222405.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:25.488Z,1513222405.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:25.521Z,1513222405.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:25.853Z,1513222405.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:25.888Z,1513222405.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:26.236Z,1513222406.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:26.259Z,1513222406.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:26.319Z,1513222406.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:26.640Z,1513222406.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:26.655Z,1513222406.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:27.039Z,1513222407.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:27.059Z,1513222407.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:27.113Z,1513222407.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:27.440Z,1513222407.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:27.456Z,1513222407.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:27.517Z,1513222407.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:27.853Z,1513222407.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:27.883Z,1513222407.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:28.253Z,1513222408.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:28.287Z,1513222408.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:28.313Z,1513222408.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:28.644Z,1513222408.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:28.687Z,1513222408.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:29.040Z,1513222409.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:29.055Z,1513222409.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:29.112Z,1513222409.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:29.431Z,1513222409.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:29.466Z,1513222409.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:29.529Z,1513222409.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:29.835Z,1513222409.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:29.867Z,1513222409.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:30.231Z,1513222410.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:30.255Z,1513222410.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:30.325Z,1513222410.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:30.628Z,1513222410.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:30.662Z,1513222410.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:31.052Z,1513222411.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:31.123Z,1513222411.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:31.153Z,1513222411.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:31.460Z,1513222411.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:31.524Z,1513222411.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:31.537Z,1513222411.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:31.871Z,1513222411.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:31.898Z,1513222411.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:32.228Z,1513222412.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:32.252Z,1513222412.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:32.333Z,1513222412.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:32.634Z,1513222412.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:32.655Z,1513222412.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:33.040Z,1513222413.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:33.074Z,1513222413.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:33.129Z,1513222413.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:33.438Z,1513222413.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:33.452Z,1513222413.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:33.533Z,1513222413.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:33.849Z,1513222413.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:33.879Z,1513222413.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:34.246Z,1513222414.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:34.278Z,1513222414.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:34.329Z,1513222414.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:34.651Z,1513222414.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:34.683Z,1513222414.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:35.039Z,1513222415.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:35.054Z,1513222415.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:35.125Z,1513222415.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:35.440Z,1513222415.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:35.454Z,1513222415.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:35.529Z,1513222415.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:35.839Z,1513222415.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:35.858Z,1513222415.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:36.240Z,1513222416.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:36.256Z,1513222416.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:36.325Z,1513222416.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:36.636Z,1513222416.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:36.652Z,1513222416.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:37.042Z,1513222417.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:37.057Z,1513222417.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:37.121Z,1513222417.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:37.445Z,1513222417.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:37.461Z,1513222417.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:37.525Z,1513222417.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:37.852Z,1513222417.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:37.885Z,1513222417.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:38.247Z,1513222418.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:38.284Z,1513222418.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:38.321Z,1513222418.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:38.644Z,1513222418.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:38.659Z,1513222418.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:39.039Z,1513222419.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:39.059Z,1513222419.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:39.117Z,1513222419.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:39.438Z,1513222419.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:39.454Z,1513222419.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:39.521Z,1513222419.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:39.846Z,1513222419.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:39.861Z,1513222419.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:40.249Z,1513222420.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:40.264Z,1513222420.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:40.317Z,1513222420.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:40.646Z,1513222420.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:40.661Z,1513222420.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:41.040Z,1513222421.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:41.059Z,1513222421.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:41.113Z,1513222421.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:41.439Z,1513222421.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:41.459Z,1513222421.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:41.517Z,1513222421.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:41.842Z,1513222421.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:41.857Z,1513222421.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:42.240Z,1513222422.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:42.254Z,1513222422.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:42.313Z,1513222422.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:42.640Z,1513222422.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:42.648Z,1513222422.648 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:33:42.648Z,1513222422.648 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:33:42.648Z,1513222422.648 [BPC1](ERROR): Data Fault
2017-12-14T03:33:42.656Z,1513222422.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:42.695Z,1513222422.695 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:33:43.046Z,1513222423.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:43.061Z,1513222423.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:43.110Z,1513222423.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:43.450Z,1513222423.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:43.473Z,1513222423.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:43.538Z,1513222423.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:43.850Z,1513222423.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:43.873Z,1513222423.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:43.886Z,1513222423.886 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:33:43.886Z,1513222423.886 [BPC1] No Fault, FailCount= 1
2017-12-14T03:33:44.235Z,1513222424.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:44.334Z,1513222424.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:44.377Z,1513222424.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:44.637Z,1513222424.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:44.652Z,1513222424.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:45.040Z,1513222425.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:45.054Z,1513222425.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:45.131Z,1513222425.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:45.445Z,1513222425.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:45.460Z,1513222425.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:45.549Z,1513222425.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:45.846Z,1513222425.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:45.863Z,1513222425.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:46.250Z,1513222426.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:46.265Z,1513222426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:46.346Z,1513222426.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:46.646Z,1513222426.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:46.662Z,1513222426.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:47.039Z,1513222427.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:47.059Z,1513222427.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:47.141Z,1513222427.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:47.440Z,1513222427.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:47.510Z,1513222427.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:47.546Z,1513222427.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:47.840Z,1513222427.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:47.855Z,1513222427.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:48.239Z,1513222428.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:48.258Z,1513222428.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:48.341Z,1513222428.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:48.636Z,1513222428.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:48.652Z,1513222428.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:49.044Z,1513222429.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:49.064Z,1513222429.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:49.137Z,1513222429.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:49.445Z,1513222429.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:49.460Z,1513222429.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:49.541Z,1513222429.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:49.846Z,1513222429.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:49.861Z,1513222429.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:50.243Z,1513222430.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:50.258Z,1513222430.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:50.337Z,1513222430.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:50.664Z,1513222430.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:50.703Z,1513222430.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:51.031Z,1513222431.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:51.066Z,1513222431.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:51.133Z,1513222431.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:51.430Z,1513222431.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:51.462Z,1513222431.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:51.537Z,1513222431.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:51.846Z,1513222431.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:51.873Z,1513222431.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:52.259Z,1513222432.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:52.274Z,1513222432.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:52.333Z,1513222432.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:52.658Z,1513222432.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:52.714Z,1513222432.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:53.030Z,1513222433.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:53.062Z,1513222433.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:53.129Z,1513222433.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:53.431Z,1513222433.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:53.475Z,1513222433.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:53.533Z,1513222433.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:53.835Z,1513222433.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:53.866Z,1513222433.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:54.242Z,1513222434.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:54.263Z,1513222434.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:54.329Z,1513222434.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:54.641Z,1513222434.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:54.656Z,1513222434.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:55.054Z,1513222435.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:55.085Z,1513222435.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:55.125Z,1513222435.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:55.459Z,1513222435.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:55.489Z,1513222435.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:55.529Z,1513222435.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:55.849Z,1513222435.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:55.864Z,1513222435.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:56.245Z,1513222436.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:56.260Z,1513222436.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:56.326Z,1513222436.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:56.637Z,1513222436.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:56.666Z,1513222436.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:57.045Z,1513222437.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:57.123Z,1513222437.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:57.135Z,1513222437.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:57.439Z,1513222437.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:57.454Z,1513222437.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:57.541Z,1513222437.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:57.852Z,1513222437.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:57.882Z,1513222437.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:58.250Z,1513222438.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:58.284Z,1513222438.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:58.337Z,1513222438.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:58.638Z,1513222438.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:58.654Z,1513222438.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:59.035Z,1513222439.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:59.055Z,1513222439.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:59.135Z,1513222439.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:59.444Z,1513222439.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:59.459Z,1513222439.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:33:59.549Z,1513222439.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:59.840Z,1513222439.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:33:59.856Z,1513222439.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:00.240Z,1513222440.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:00.346Z,1513222440.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:00.380Z,1513222440.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:00.642Z,1513222440.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:00.657Z,1513222440.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:01.045Z,1513222441.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:01.060Z,1513222441.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:01.141Z,1513222441.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:01.445Z,1513222441.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:01.460Z,1513222441.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:01.546Z,1513222441.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:01.846Z,1513222441.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:01.860Z,1513222441.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:02.239Z,1513222442.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:02.257Z,1513222442.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:02.341Z,1513222442.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:02.640Z,1513222442.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:02.663Z,1513222442.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:03.039Z,1513222443.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:03.059Z,1513222443.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:03.137Z,1513222443.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:03.438Z,1513222443.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:03.453Z,1513222443.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:03.541Z,1513222443.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:03.851Z,1513222443.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:03.871Z,1513222443.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:04.254Z,1513222444.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:04.271Z,1513222444.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:04.337Z,1513222444.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:04.650Z,1513222444.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:04.785Z,1513222444.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:05.042Z,1513222445.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:05.079Z,1513222445.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:05.133Z,1513222445.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:05.435Z,1513222445.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:05.463Z,1513222445.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:05.537Z,1513222445.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:05.839Z,1513222445.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:05.887Z,1513222445.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:06.242Z,1513222446.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:06.257Z,1513222446.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:06.333Z,1513222446.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:06.687Z,1513222446.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:06.802Z,1513222446.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:07.047Z,1513222447.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:07.067Z,1513222447.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:07.129Z,1513222447.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:07.487Z,1513222447.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:07.533Z,1513222447.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:07.568Z,1513222447.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:07.848Z,1513222447.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:07.862Z,1513222447.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:08.244Z,1513222448.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:08.263Z,1513222448.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:08.329Z,1513222448.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:08.639Z,1513222448.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:08.654Z,1513222448.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:09.049Z,1513222449.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:09.063Z,1513222449.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:09.128Z,1513222449.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:09.439Z,1513222449.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:09.461Z,1513222449.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:09.533Z,1513222449.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:09.854Z,1513222449.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:09.869Z,1513222449.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:10.245Z,1513222450.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:10.259Z,1513222450.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:10.329Z,1513222450.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:10.642Z,1513222450.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:10.656Z,1513222450.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:11.042Z,1513222451.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:11.056Z,1513222451.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:11.127Z,1513222451.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:11.430Z,1513222451.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:11.471Z,1513222451.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:11.537Z,1513222451.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:11.825Z,1513222451.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:11.839Z,1513222451.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:12.233Z,1513222452.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:12.247Z,1513222452.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:12.333Z,1513222452.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:12.641Z,1513222452.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:12.655Z,1513222452.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:13.050Z,1513222453.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:13.065Z,1513222453.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:13.131Z,1513222453.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:13.451Z,1513222453.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:13.466Z,1513222453.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:13.549Z,1513222453.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:13.850Z,1513222453.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:13.865Z,1513222453.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:14.243Z,1513222454.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:14.264Z,1513222454.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:14.346Z,1513222454.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:14.638Z,1513222454.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:14.653Z,1513222454.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:15.040Z,1513222455.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:15.095Z,1513222455.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:15.141Z,1513222455.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:15.440Z,1513222455.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:15.456Z,1513222455.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:15.546Z,1513222455.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:15.850Z,1513222455.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:15.871Z,1513222455.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:16.250Z,1513222456.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:16.265Z,1513222456.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:16.341Z,1513222456.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:16.647Z,1513222456.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:16.669Z,1513222456.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:17.039Z,1513222457.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:17.054Z,1513222457.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:17.137Z,1513222457.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:17.440Z,1513222457.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:17.454Z,1513222457.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:17.541Z,1513222457.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:17.835Z,1513222457.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:17.857Z,1513222457.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:18.337Z,1513222458.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:19.137Z,1513222459.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:19.541Z,1513222459.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:20.337Z,1513222460.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.133Z,1513222461.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.338Z,1513222461.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.354Z,1513222461.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:21.452Z,1513222461.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.493Z,1513222461.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:21.537Z,1513222461.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.822Z,1513222461.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:21.855Z,1513222461.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:22.221Z,1513222462.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:22.248Z,1513222462.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:22.333Z,1513222462.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:22.619Z,1513222462.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:22.693Z,1513222462.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:23.003Z,1513222463.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:23.025Z,1513222463.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:23.129Z,1513222463.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:23.407Z,1513222463.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:23.422Z,1513222463.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:23.533Z,1513222463.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:23.814Z,1513222463.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:23.829Z,1513222463.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:24.214Z,1513222464.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:24.235Z,1513222464.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:24.329Z,1513222464.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:24.613Z,1513222464.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:24.628Z,1513222464.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:25.026Z,1513222465.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:25.057Z,1513222465.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:25.127Z,1513222465.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:25.422Z,1513222465.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:25.444Z,1513222465.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:25.541Z,1513222465.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:25.821Z,1513222465.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:25.844Z,1513222465.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:26.218Z,1513222466.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:26.242Z,1513222466.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:26.337Z,1513222466.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:26.611Z,1513222466.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:26.643Z,1513222466.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:27.011Z,1513222467.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:27.062Z,1513222467.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:27.134Z,1513222467.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:27.406Z,1513222467.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:27.463Z,1513222467.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:27.545Z,1513222467.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:27.818Z,1513222467.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:27.834Z,1513222467.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:28.229Z,1513222468.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:28.244Z,1513222468.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:28.341Z,1513222468.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:28.618Z,1513222468.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:28.670Z,1513222468.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:29.033Z,1513222469.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:29.086Z,1513222469.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:29.138Z,1513222469.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:29.404Z,1513222469.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:29.455Z,1513222469.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:29.541Z,1513222469.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:29.809Z,1513222469.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:29.843Z,1513222469.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:30.203Z,1513222470.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:30.235Z,1513222470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:30.337Z,1513222470.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:30.603Z,1513222470.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:30.639Z,1513222470.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:31.015Z,1513222471.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:31.041Z,1513222471.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:31.133Z,1513222471.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:31.418Z,1513222471.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:31.451Z,1513222471.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:31.537Z,1513222471.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:31.813Z,1513222471.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:31.843Z,1513222471.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:32.208Z,1513222472.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:32.287Z,1513222472.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:32.334Z,1513222472.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:32.602Z,1513222472.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:32.639Z,1513222472.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:32.000Z,1513222473.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:33.051Z,1513222473.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:33.129Z,1513222473.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:33.408Z,1513222473.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:33.427Z,1513222473.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:33.533Z,1513222473.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:33.817Z,1513222473.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:33.831Z,1513222473.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:34.217Z,1513222474.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:34.240Z,1513222474.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:34.329Z,1513222474.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:34.615Z,1513222474.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:34.645Z,1513222474.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:35.009Z,1513222475.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:35.047Z,1513222475.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:35.125Z,1513222475.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:35.424Z,1513222475.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:35.466Z,1513222475.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:35.529Z,1513222475.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:35.819Z,1513222475.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:35.847Z,1513222475.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:36.211Z,1513222476.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:36.225Z,1513222476.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:36.325Z,1513222476.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:36.604Z,1513222476.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:36.618Z,1513222476.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:37.027Z,1513222477.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:37.049Z,1513222477.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:37.121Z,1513222477.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:37.425Z,1513222477.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:37.498Z,1513222477.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:37.525Z,1513222477.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:37.824Z,1513222477.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:37.847Z,1513222477.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:38.207Z,1513222478.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:38.227Z,1513222478.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:38.321Z,1513222478.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:38.647Z,1513222478.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:38.662Z,1513222478.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:39.012Z,1513222479.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:39.028Z,1513222479.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:39.119Z,1513222479.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:39.409Z,1513222479.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:39.432Z,1513222479.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:39.541Z,1513222479.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:39.821Z,1513222479.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:39.836Z,1513222479.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:40.225Z,1513222480.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:40.240Z,1513222480.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:40.337Z,1513222480.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:40.620Z,1513222480.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:40.647Z,1513222480.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:41.015Z,1513222481.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:41.029Z,1513222481.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:41.135Z,1513222481.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:41.412Z,1513222481.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:41.427Z,1513222481.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:41.537Z,1513222481.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:41.811Z,1513222481.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:41.851Z,1513222481.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:42.213Z,1513222482.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:42.227Z,1513222482.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:42.333Z,1513222482.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:42.612Z,1513222482.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:42.627Z,1513222482.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:43.025Z,1513222483.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:43.056Z,1513222483.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:43.129Z,1513222483.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:43.418Z,1513222483.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:43.433Z,1513222483.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:43.533Z,1513222483.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:43.816Z,1513222483.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:43.831Z,1513222483.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:44.206Z,1513222484.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:44.234Z,1513222484.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:44.329Z,1513222484.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:44.604Z,1513222484.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:44.618Z,1513222484.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:45.047Z,1513222485.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:45.102Z,1513222485.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:45.129Z,1513222485.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:45.419Z,1513222485.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:45.452Z,1513222485.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:45.533Z,1513222485.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:45.822Z,1513222485.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:45.853Z,1513222485.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:46.226Z,1513222486.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:46.259Z,1513222486.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:46.330Z,1513222486.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:46.626Z,1513222486.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:46.649Z,1513222486.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:47.013Z,1513222487.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:47.027Z,1513222487.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:47.125Z,1513222487.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:47.415Z,1513222487.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:47.430Z,1513222487.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:47.529Z,1513222487.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:47.813Z,1513222487.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:47.828Z,1513222487.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:48.222Z,1513222488.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:48.259Z,1513222488.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:48.325Z,1513222488.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:48.613Z,1513222488.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:48.628Z,1513222488.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:49.018Z,1513222489.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:49.032Z,1513222489.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:49.121Z,1513222489.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:49.425Z,1513222489.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:49.499Z,1513222489.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:49.525Z,1513222489.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:49.823Z,1513222489.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:49.843Z,1513222489.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:50.212Z,1513222490.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:50.231Z,1513222490.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:50.321Z,1513222490.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:50.613Z,1513222490.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:50.659Z,1513222490.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:51.011Z,1513222491.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:51.031Z,1513222491.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:51.117Z,1513222491.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:51.461Z,1513222491.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:51.522Z,1513222491.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:51.527Z,1513222491.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:51.822Z,1513222491.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:51.836Z,1513222491.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:52.222Z,1513222492.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:52.243Z,1513222492.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:52.317Z,1513222492.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:52.616Z,1513222492.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:52.639Z,1513222492.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:53.016Z,1513222493.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:53.030Z,1513222493.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:53.114Z,1513222493.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:53.403Z,1513222493.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:53.436Z,1513222493.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:53.521Z,1513222493.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:53.801Z,1513222493.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:53.816Z,1513222493.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:54.203Z,1513222494.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:54.217Z,1513222494.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:54.317Z,1513222494.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:54.618Z,1513222494.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:54.665Z,1513222494.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:55.021Z,1513222495.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:55.047Z,1513222495.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:55.115Z,1513222495.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:55.418Z,1513222495.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:55.455Z,1513222495.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:55.546Z,1513222495.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:55.814Z,1513222495.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:55.829Z,1513222495.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:56.208Z,1513222496.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:56.226Z,1513222496.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:56.346Z,1513222496.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:56.611Z,1513222496.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:56.625Z,1513222496.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:57.012Z,1513222497.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:57.027Z,1513222497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:57.143Z,1513222497.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:57.412Z,1513222497.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:57.427Z,1513222497.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:57.545Z,1513222497.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:57.844Z,1513222497.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:57.888Z,1513222497.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:58.217Z,1513222498.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:58.233Z,1513222498.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:58.344Z,1513222498.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:58.626Z,1513222498.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:58.640Z,1513222498.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:59.011Z,1513222499.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:59.031Z,1513222499.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:59.137Z,1513222499.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:59.412Z,1513222499.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:59.427Z,1513222499.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:34:59.541Z,1513222499.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:59.812Z,1513222499.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:34:59.870Z,1513222499.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:00.210Z,1513222500.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:00.231Z,1513222500.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:00.337Z,1513222500.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:00.611Z,1513222500.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:00.626Z,1513222500.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:01.069Z,1513222501.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:01.092Z,1513222501.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:01.133Z,1513222501.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:01.426Z,1513222501.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:01.441Z,1513222501.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:01.537Z,1513222501.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:01.827Z,1513222501.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:01.842Z,1513222501.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:02.203Z,1513222502.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:02.229Z,1513222502.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:02.333Z,1513222502.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:02.602Z,1513222502.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:02.634Z,1513222502.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:03.004Z,1513222503.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:03.029Z,1513222503.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:03.129Z,1513222503.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:03.403Z,1513222503.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:03.435Z,1513222503.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:03.533Z,1513222503.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:03.826Z,1513222503.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:03.841Z,1513222503.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:04.244Z,1513222504.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:04.275Z,1513222504.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:04.330Z,1513222504.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:04.623Z,1513222504.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:04.638Z,1513222504.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:05.002Z,1513222505.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:05.039Z,1513222505.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:05.125Z,1513222505.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:05.411Z,1513222505.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:05.437Z,1513222505.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:05.529Z,1513222505.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:05.803Z,1513222505.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:05.830Z,1513222505.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:06.208Z,1513222506.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:06.239Z,1513222506.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:06.325Z,1513222506.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:06.598Z,1513222506.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:06.613Z,1513222506.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:07.019Z,1513222507.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:07.055Z,1513222507.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:07.123Z,1513222507.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:07.444Z,1513222507.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:07.476Z,1513222507.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:07.542Z,1513222507.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:07.829Z,1513222507.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:07.852Z,1513222507.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:08.216Z,1513222508.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:08.232Z,1513222508.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:08.337Z,1513222508.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:08.604Z,1513222508.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:08.670Z,1513222508.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:09.028Z,1513222509.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:09.043Z,1513222509.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:09.135Z,1513222509.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:09.412Z,1513222509.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:09.428Z,1513222509.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:09.541Z,1513222509.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:09.818Z,1513222509.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:09.834Z,1513222509.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:10.225Z,1513222510.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:10.261Z,1513222510.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:10.337Z,1513222510.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:10.622Z,1513222510.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:10.668Z,1513222510.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:11.008Z,1513222511.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:11.039Z,1513222511.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:11.146Z,1513222511.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:11.411Z,1513222511.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:11.431Z,1513222511.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:11.549Z,1513222511.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:11.823Z,1513222511.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:11.902Z,1513222511.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:12.210Z,1513222512.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:12.226Z,1513222512.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:12.346Z,1513222512.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:12.611Z,1513222512.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:12.625Z,1513222512.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:13.022Z,1513222513.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:13.082Z,1513222513.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:13.141Z,1513222513.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:13.425Z,1513222513.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:13.440Z,1513222513.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:13.546Z,1513222513.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:13.822Z,1513222513.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:13.876Z,1513222513.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:14.203Z,1513222514.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:14.228Z,1513222514.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:14.341Z,1513222514.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:14.602Z,1513222514.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:14.642Z,1513222514.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:15.003Z,1513222515.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:15.039Z,1513222515.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:15.137Z,1513222515.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:15.419Z,1513222515.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:15.434Z,1513222515.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:15.541Z,1513222515.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:15.822Z,1513222515.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:15.847Z,1513222515.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:16.230Z,1513222516.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:16.244Z,1513222516.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:16.337Z,1513222516.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:16.621Z,1513222516.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:16.637Z,1513222516.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:17.002Z,1513222517.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:17.082Z,1513222517.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:17.133Z,1513222517.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:17.407Z,1513222517.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:17.431Z,1513222517.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:17.537Z,1513222517.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:17.803Z,1513222517.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:17.835Z,1513222517.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:17.838Z,1513222517.838 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T03:30:17.5Z
2017-12-14T03:35:17.839Z,1513222517.839 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:35:17.839Z,1513222517.839 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:35:18.205Z,1513222518.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:18.240Z,1513222518.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:18.333Z,1513222518.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:19.129Z,1513222519.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:19.533Z,1513222519.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:20.330Z,1513222520.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:21.126Z,1513222521.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:21.533Z,1513222521.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:22.054Z,1513222522.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:22.092Z,1513222522.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:22.169Z,1513222522.169 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0072.lzma
2017-12-14T03:35:22.202Z,1513222522.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:22.237Z,1513222522.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:22.329Z,1513222522.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:22.586Z,1513222522.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:22.610Z,1513222522.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:22.947Z,1513222522.947 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0072.lzma.bak
2017-12-14T03:35:22.947Z,1513222522.947 [DataOverHttps](INFO): SBD MOMSN=5437468
2017-12-14T03:35:22.998Z,1513222522.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:23.013Z,1513222523.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:23.126Z,1513222523.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:23.533Z,1513222523.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:24.227Z,1513222524.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:24.247Z,1513222524.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:24.332Z,1513222524.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:24.344Z,1513222524.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:24.392Z,1513222524.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:25.125Z,1513222525.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:25.529Z,1513222525.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:26.325Z,1513222526.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:27.121Z,1513222527.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:27.525Z,1513222527.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:27.925Z,1513222527.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:27.940Z,1513222527.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:28.057Z,1513222528.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:28.092Z,1513222528.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:28.321Z,1513222528.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:28.414Z,1513222528.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:28.444Z,1513222528.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:28.833Z,1513222528.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:28.860Z,1513222528.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:29.118Z,1513222529.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:29.224Z,1513222529.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:29.247Z,1513222529.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:29.521Z,1513222529.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:29.594Z,1513222529.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:29.622Z,1513222529.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:30.317Z,1513222530.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:31.113Z,1513222531.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:31.517Z,1513222531.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:32.313Z,1513222532.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.056Z,1513222533.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.110Z,1513222533.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.113Z,1513222533.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:33.190Z,1513222533.190 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0073.lzma
2017-12-14T03:35:33.222Z,1513222533.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.261Z,1513222533.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:33.513Z,1513222533.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.608Z,1513222533.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:33.663Z,1513222533.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:33.972Z,1513222533.972 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0073.lzma.bak
2017-12-14T03:35:33.972Z,1513222533.972 [DataOverHttps](INFO): SBD MOMSN=5437472
2017-12-14T03:35:33.994Z,1513222533.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:34.034Z,1513222534.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:34.309Z,1513222534.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:35.106Z,1513222535.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:35.232Z,1513222535.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:35.279Z,1513222535.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:35.299Z,1513222535.299 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:35:35.299Z,1513222535.299 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:35:35.299Z,1513222535.299 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:35:35.382Z,1513222535.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:35.403Z,1513222535.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:35.537Z,1513222535.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:36.333Z,1513222536.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:37.131Z,1513222537.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:37.537Z,1513222537.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:38.333Z,1513222538.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:38.801Z,1513222538.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:38.847Z,1513222538.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:38.964Z,1513222538.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:38.980Z,1513222538.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:39.129Z,1513222539.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:39.335Z,1513222539.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:39.427Z,1513222539.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:39.534Z,1513222539.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:39.727Z,1513222539.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:39.743Z,1513222539.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:40.112Z,1513222540.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:40.144Z,1513222540.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:40.329Z,1513222540.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:40.507Z,1513222540.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:40.539Z,1513222540.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:40.922Z,1513222540.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:40.937Z,1513222540.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:41.125Z,1513222541.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:41.338Z,1513222541.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:41.353Z,1513222541.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:41.529Z,1513222541.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:41.724Z,1513222541.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:41.743Z,1513222541.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:42.105Z,1513222542.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:42.136Z,1513222542.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:42.325Z,1513222542.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:42.501Z,1513222542.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:42.544Z,1513222542.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:42.919Z,1513222542.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:42.938Z,1513222542.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:43.121Z,1513222543.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:43.318Z,1513222543.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:43.351Z,1513222543.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:43.525Z,1513222543.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:43.718Z,1513222543.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:43.751Z,1513222543.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:44.110Z,1513222544.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:44.149Z,1513222544.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:44.322Z,1513222544.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:44.512Z,1513222544.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:44.551Z,1513222544.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:44.910Z,1513222544.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:44.946Z,1513222544.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:45.117Z,1513222545.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:45.311Z,1513222545.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:45.334Z,1513222545.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:45.521Z,1513222545.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:45.767Z,1513222545.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:45.799Z,1513222545.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:46.121Z,1513222546.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:46.139Z,1513222546.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:46.317Z,1513222546.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:46.528Z,1513222546.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:46.542Z,1513222546.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:46.916Z,1513222546.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:46.935Z,1513222546.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:47.114Z,1513222547.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:47.317Z,1513222547.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:47.331Z,1513222547.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:47.517Z,1513222547.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:47.727Z,1513222547.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:47.772Z,1513222547.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:48.128Z,1513222548.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:48.144Z,1513222548.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:48.313Z,1513222548.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:48.521Z,1513222548.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:48.536Z,1513222548.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:48.959Z,1513222548.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:49.012Z,1513222549.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:49.111Z,1513222549.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:49.332Z,1513222549.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:49.351Z,1513222549.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:49.541Z,1513222549.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:49.732Z,1513222549.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:49.747Z,1513222549.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:50.125Z,1513222550.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:50.140Z,1513222550.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:50.337Z,1513222550.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:50.522Z,1513222550.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:50.537Z,1513222550.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:50.934Z,1513222550.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:50.949Z,1513222550.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:51.135Z,1513222551.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:51.308Z,1513222551.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:51.335Z,1513222551.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:51.541Z,1513222551.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:51.730Z,1513222551.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:51.745Z,1513222551.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:52.123Z,1513222552.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:52.146Z,1513222552.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:52.337Z,1513222552.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:52.516Z,1513222552.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:52.544Z,1513222552.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:52.917Z,1513222552.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:52.943Z,1513222552.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:53.133Z,1513222553.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:53.314Z,1513222553.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:53.341Z,1513222553.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:53.537Z,1513222553.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:53.722Z,1513222553.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:53.744Z,1513222553.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:54.127Z,1513222554.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:54.152Z,1513222554.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:54.333Z,1513222554.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:54.519Z,1513222554.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:54.549Z,1513222554.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:54.920Z,1513222554.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:54.954Z,1513222554.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:55.129Z,1513222555.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:55.342Z,1513222555.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:55.431Z,1513222555.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:55.533Z,1513222555.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:55.741Z,1513222555.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:55.756Z,1513222555.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:56.099Z,1513222556.099 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:35:56.099Z,1513222556.099 [NAL9602] Data Fault, FailCount= 2
2017-12-14T03:35:56.099Z,1513222556.099 [NAL9602](ERROR): Data Fault
2017-12-14T03:35:56.118Z,1513222556.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:56.157Z,1513222556.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:56.182Z,1513222556.182 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:35:56.329Z,1513222556.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:56.494Z,1513222556.494 [NAL9602](INFO): Powering down
2017-12-14T03:35:56.512Z,1513222556.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:56.531Z,1513222556.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:56.531Z,1513222556.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2017-12-14T03:35:56.531Z,1513222556.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:35:56.540Z,1513222556.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:56.540Z,1513222556.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2017-12-14T03:35:56.540Z,1513222556.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:35:56.542Z,1513222556.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:56.542Z,1513222556.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2017-12-14T03:35:56.542Z,1513222556.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:35:56.566Z,1513222556.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:35:56.566Z,1513222556.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:35:56.566Z,1513222556.566 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:35:56.911Z,1513222556.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:56.938Z,1513222556.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:35:56.938Z,1513222556.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2017-12-14T03:35:56.939Z,1513222556.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:35:56.939Z,1513222556.939 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2017-12-14T03:35:56.939Z,1513222556.939 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:35:56.939Z,1513222556.939 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2017-12-14T03:35:57.125Z,1513222557.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:57.329Z,1513222557.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:57.344Z,1513222557.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:35:57.344Z,1513222557.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:35:57.344Z,1513222557.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:35:57.345Z,1513222557.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:35:57.345Z,1513222557.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:35:57.346Z,1513222557.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:35:57.346Z,1513222557.346 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:35:57.346Z,1513222557.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:35:57.347Z,1513222557.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:35:57.378Z,1513222557.378 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:35:57.378Z,1513222557.378 [NAL9602] No Fault, FailCount= 2
2017-12-14T03:35:57.529Z,1513222557.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:57.711Z,1513222557.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:57.734Z,1513222557.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:58.114Z,1513222558.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:58.135Z,1513222558.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:58.326Z,1513222558.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:58.520Z,1513222558.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:58.534Z,1513222558.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:58.959Z,1513222558.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:58.999Z,1513222558.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:59.121Z,1513222559.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:59.316Z,1513222559.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:59.364Z,1513222559.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:35:59.525Z,1513222559.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:59.712Z,1513222559.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:35:59.791Z,1513222559.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:00.115Z,1513222560.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:00.130Z,1513222560.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:00.321Z,1513222560.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:00.518Z,1513222560.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:00.532Z,1513222560.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:00.918Z,1513222560.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:00.959Z,1513222560.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:01.118Z,1513222561.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:01.312Z,1513222561.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:01.337Z,1513222561.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:01.521Z,1513222561.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:01.741Z,1513222561.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:01.788Z,1513222561.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:02.116Z,1513222562.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:02.130Z,1513222562.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:02.317Z,1513222562.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:02.520Z,1513222562.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:02.599Z,1513222562.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:02.903Z,1513222562.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:02.930Z,1513222562.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:03.114Z,1513222563.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:03.302Z,1513222563.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:03.336Z,1513222563.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:03.525Z,1513222563.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:03.715Z,1513222563.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:03.735Z,1513222563.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:04.104Z,1513222564.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:04.130Z,1513222564.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:04.321Z,1513222564.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:04.504Z,1513222564.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:04.536Z,1513222564.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:04.944Z,1513222564.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:04.985Z,1513222564.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:05.119Z,1513222565.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:05.331Z,1513222565.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:05.351Z,1513222565.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:05.537Z,1513222565.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:05.719Z,1513222565.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:05.734Z,1513222565.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:06.123Z,1513222566.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:06.143Z,1513222566.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:06.333Z,1513222566.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:06.499Z,1513222566.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:06.522Z,1513222566.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:06.907Z,1513222566.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:06.932Z,1513222566.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:07.132Z,1513222567.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:07.315Z,1513222567.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:07.335Z,1513222567.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:07.540Z,1513222567.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:07.711Z,1513222567.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:07.726Z,1513222567.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:08.109Z,1513222568.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:08.123Z,1513222568.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:08.334Z,1513222568.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:08.505Z,1513222568.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:08.532Z,1513222568.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:08.915Z,1513222568.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:08.991Z,1513222568.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:09.129Z,1513222569.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:09.310Z,1513222569.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:09.339Z,1513222569.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:09.533Z,1513222569.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:09.716Z,1513222569.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:09.731Z,1513222569.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:10.115Z,1513222570.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:10.174Z,1513222570.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:10.329Z,1513222570.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:10.514Z,1513222570.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:10.530Z,1513222570.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:10.915Z,1513222570.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:10.931Z,1513222570.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:11.126Z,1513222571.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:11.337Z,1513222571.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:11.376Z,1513222571.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:11.529Z,1513222571.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:11.718Z,1513222571.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:11.739Z,1513222571.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:12.119Z,1513222572.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:12.139Z,1513222572.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:12.325Z,1513222572.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:12.504Z,1513222572.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:12.536Z,1513222572.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:12.902Z,1513222572.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:12.927Z,1513222572.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:13.121Z,1513222573.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:13.308Z,1513222573.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:13.335Z,1513222573.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:13.525Z,1513222573.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:13.708Z,1513222573.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:13.735Z,1513222573.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:14.105Z,1513222574.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:14.132Z,1513222574.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:14.321Z,1513222574.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:14.528Z,1513222574.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:14.588Z,1513222574.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:14.914Z,1513222574.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:14.939Z,1513222574.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:15.118Z,1513222575.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:15.309Z,1513222575.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:15.342Z,1513222575.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:15.521Z,1513222575.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:15.711Z,1513222575.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:15.727Z,1513222575.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:16.115Z,1513222576.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:16.131Z,1513222576.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:16.317Z,1513222576.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:16.523Z,1513222576.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:16.538Z,1513222576.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:16.913Z,1513222576.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:16.929Z,1513222576.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:17.115Z,1513222577.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:17.314Z,1513222577.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:17.332Z,1513222577.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:17.521Z,1513222577.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:17.740Z,1513222577.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:17.806Z,1513222577.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:18.118Z,1513222578.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:18.141Z,1513222578.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:18.317Z,1513222578.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:18.520Z,1513222578.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:18.535Z,1513222578.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:18.914Z,1513222578.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:18.934Z,1513222578.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:19.117Z,1513222579.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:19.334Z,1513222579.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:19.357Z,1513222579.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:19.546Z,1513222579.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:19.718Z,1513222579.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:19.761Z,1513222579.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:20.129Z,1513222580.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:20.168Z,1513222580.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:20.341Z,1513222580.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:20.517Z,1513222580.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:20.544Z,1513222580.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:20.968Z,1513222580.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:21.030Z,1513222581.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:21.138Z,1513222581.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:21.348Z,1513222581.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:21.418Z,1513222581.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:21.541Z,1513222581.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:21.733Z,1513222581.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:21.817Z,1513222581.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:22.125Z,1513222582.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:22.255Z,1513222582.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:22.338Z,1513222582.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:22.511Z,1513222582.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:22.547Z,1513222582.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:22.908Z,1513222582.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:22.984Z,1513222582.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:23.134Z,1513222583.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:23.337Z,1513222583.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:23.407Z,1513222583.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:23.538Z,1513222583.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:23.706Z,1513222583.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:23.779Z,1513222583.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:24.104Z,1513222584.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:24.144Z,1513222584.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:24.334Z,1513222584.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:24.539Z,1513222584.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:24.588Z,1513222584.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:24.908Z,1513222584.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:24.958Z,1513222584.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:25.130Z,1513222585.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:25.308Z,1513222585.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:25.366Z,1513222585.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:25.534Z,1513222585.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:25.712Z,1513222585.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:25.758Z,1513222585.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:26.110Z,1513222586.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:26.127Z,1513222586.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:26.329Z,1513222586.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:26.512Z,1513222586.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:26.578Z,1513222586.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:26.894Z,1513222586.894 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:36:26.914Z,1513222586.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:26.977Z,1513222586.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:27.126Z,1513222587.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:27.317Z,1513222587.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:27.371Z,1513222587.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:27.529Z,1513222587.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:27.711Z,1513222587.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:27.764Z,1513222587.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:28.121Z,1513222588.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:28.165Z,1513222588.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:28.325Z,1513222588.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:28.514Z,1513222588.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:28.582Z,1513222588.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:28.907Z,1513222588.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:28.923Z,1513222588.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:29.123Z,1513222589.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:29.333Z,1513222589.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:29.357Z,1513222589.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:29.525Z,1513222589.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:29.722Z,1513222589.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:29.736Z,1513222589.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:30.111Z,1513222590.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:30.153Z,1513222590.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:30.321Z,1513222590.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:30.513Z,1513222590.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:30.528Z,1513222590.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:30.916Z,1513222590.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:30.931Z,1513222590.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:31.119Z,1513222591.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:31.311Z,1513222591.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:31.341Z,1513222591.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:31.565Z,1513222591.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:31.723Z,1513222591.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:31.739Z,1513222591.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:32.131Z,1513222592.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:32.180Z,1513222592.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:32.361Z,1513222592.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:32.521Z,1513222592.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:32.536Z,1513222592.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:32.940Z,1513222592.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:32.955Z,1513222592.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:33.158Z,1513222593.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:33.306Z,1513222593.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:33.343Z,1513222593.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:33.561Z,1513222593.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:33.725Z,1513222593.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:33.807Z,1513222593.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:34.133Z,1513222594.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:34.169Z,1513222594.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:34.357Z,1513222594.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:34.518Z,1513222594.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:34.566Z,1513222594.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:34.913Z,1513222594.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:34.959Z,1513222594.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:35.154Z,1513222595.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:35.311Z,1513222595.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:35.366Z,1513222595.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:35.558Z,1513222595.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:35.712Z,1513222595.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:35.751Z,1513222595.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:36.354Z,1513222596.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:37.154Z,1513222597.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:37.557Z,1513222597.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:38.354Z,1513222598.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:39.151Z,1513222599.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:39.557Z,1513222599.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:40.354Z,1513222600.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:41.152Z,1513222601.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:41.558Z,1513222601.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:42.353Z,1513222602.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.152Z,1513222603.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.402Z,1513222603.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.411Z,1513222603.411 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:36:43.411Z,1513222603.411 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:36:43.411Z,1513222603.411 [BPC1](ERROR): Data Fault
2017-12-14T03:36:43.426Z,1513222603.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:43.439Z,1513222603.439 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:36:43.557Z,1513222603.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.564Z,1513222603.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.599Z,1513222603.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:43.866Z,1513222603.866 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:36:43.883Z,1513222603.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:43.897Z,1513222603.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:44.283Z,1513222604.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:44.297Z,1513222604.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:44.343Z,1513222604.343 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:36:44.343Z,1513222604.343 [BPC1] No Fault, FailCount= 1
2017-12-14T03:36:44.357Z,1513222604.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:44.681Z,1513222604.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:44.761Z,1513222604.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:45.121Z,1513222605.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:45.154Z,1513222605.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:45.176Z,1513222605.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:45.483Z,1513222605.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:45.497Z,1513222605.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:45.561Z,1513222605.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:45.882Z,1513222605.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:45.896Z,1513222605.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:46.286Z,1513222606.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:46.300Z,1513222606.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:46.358Z,1513222606.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:46.686Z,1513222606.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:46.702Z,1513222606.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:47.119Z,1513222607.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:47.154Z,1513222607.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:47.169Z,1513222607.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:47.498Z,1513222607.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:47.516Z,1513222607.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:47.557Z,1513222607.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:47.894Z,1513222607.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:47.922Z,1513222607.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:48.300Z,1513222608.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:48.315Z,1513222608.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:48.354Z,1513222608.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:48.678Z,1513222608.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:48.705Z,1513222608.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:49.075Z,1513222609.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:49.091Z,1513222609.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:49.149Z,1513222609.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:49.479Z,1513222609.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:49.511Z,1513222609.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:49.553Z,1513222609.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:49.879Z,1513222609.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:49.916Z,1513222609.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:50.293Z,1513222610.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:50.316Z,1513222610.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:50.349Z,1513222610.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:50.698Z,1513222610.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:50.714Z,1513222610.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:51.090Z,1513222611.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:51.119Z,1513222611.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:51.146Z,1513222611.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:51.550Z,1513222611.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:51.557Z,1513222611.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:51.572Z,1513222611.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:51.872Z,1513222611.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:51.895Z,1513222611.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:52.275Z,1513222612.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:52.310Z,1513222612.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:52.345Z,1513222612.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:52.682Z,1513222612.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:52.696Z,1513222612.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:53.084Z,1513222613.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:53.142Z,1513222613.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:53.146Z,1513222613.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:53.487Z,1513222613.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:53.546Z,1513222613.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:53.553Z,1513222613.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:53.889Z,1513222613.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:53.911Z,1513222613.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:54.288Z,1513222614.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:54.303Z,1513222614.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:54.342Z,1513222614.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:54.683Z,1513222614.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:54.698Z,1513222614.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:55.074Z,1513222615.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:55.108Z,1513222615.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:55.137Z,1513222615.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:55.476Z,1513222615.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:55.503Z,1513222615.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:55.541Z,1513222615.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:55.958Z,1513222615.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:56.011Z,1513222616.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:56.299Z,1513222616.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:56.314Z,1513222616.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:56.337Z,1513222616.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:56.702Z,1513222616.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:56.727Z,1513222616.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:57.118Z,1513222617.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:57.134Z,1513222617.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:57.136Z,1513222617.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:57.481Z,1513222617.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:57.496Z,1513222617.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:57.537Z,1513222617.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:57.873Z,1513222617.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:57.888Z,1513222617.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:58.283Z,1513222618.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:58.298Z,1513222618.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:58.334Z,1513222618.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:58.680Z,1513222618.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:58.695Z,1513222618.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:59.095Z,1513222619.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:59.131Z,1513222619.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:59.179Z,1513222619.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:59.488Z,1513222619.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:59.503Z,1513222619.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:36:59.553Z,1513222619.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:59.893Z,1513222619.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:36:59.915Z,1513222619.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:00.309Z,1513222620.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:00.343Z,1513222620.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:00.349Z,1513222620.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:00.682Z,1513222620.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:00.698Z,1513222620.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:01.114Z,1513222621.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:01.146Z,1513222621.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:01.168Z,1513222621.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:01.475Z,1513222621.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:01.506Z,1513222621.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:01.553Z,1513222621.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:01.875Z,1513222621.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:01.906Z,1513222621.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:02.302Z,1513222622.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:02.316Z,1513222622.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:02.349Z,1513222622.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:02.704Z,1513222622.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:02.719Z,1513222622.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:03.126Z,1513222623.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:03.146Z,1513222623.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:03.179Z,1513222623.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:03.481Z,1513222623.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:03.539Z,1513222623.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:03.885Z,1513222623.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:03.900Z,1513222623.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:03.941Z,1513222623.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:04.285Z,1513222624.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:04.300Z,1513222624.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:04.685Z,1513222624.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:04.699Z,1513222624.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:04.738Z,1513222624.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:05.083Z,1513222625.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:05.147Z,1513222625.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:05.491Z,1513222625.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:05.508Z,1513222625.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:05.533Z,1513222625.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:05.893Z,1513222625.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:05.908Z,1513222625.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:06.294Z,1513222626.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:06.330Z,1513222626.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:06.378Z,1513222626.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:06.685Z,1513222626.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:06.703Z,1513222626.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:07.075Z,1513222627.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:07.116Z,1513222627.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:07.125Z,1513222627.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:07.479Z,1513222627.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:07.506Z,1513222627.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:07.875Z,1513222627.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:07.910Z,1513222627.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:07.921Z,1513222627.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:08.302Z,1513222628.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:08.317Z,1513222628.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:08.689Z,1513222628.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:08.717Z,1513222628.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:08.721Z,1513222628.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:09.099Z,1513222629.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:09.114Z,1513222629.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:09.478Z,1513222629.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:09.514Z,1513222629.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:09.529Z,1513222629.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:09.887Z,1513222629.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:09.903Z,1513222629.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:10.286Z,1513222630.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:10.317Z,1513222630.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:10.342Z,1513222630.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:10.686Z,1513222630.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:10.700Z,1513222630.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:11.081Z,1513222631.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:11.097Z,1513222631.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:11.114Z,1513222631.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:11.498Z,1513222631.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:11.529Z,1513222631.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:11.894Z,1513222631.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:11.909Z,1513222631.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:11.910Z,1513222631.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:12.290Z,1513222632.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:12.306Z,1513222632.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:12.706Z,1513222632.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:12.711Z,1513222632.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:12.751Z,1513222632.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:13.083Z,1513222633.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:13.148Z,1513222633.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:13.480Z,1513222633.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:13.494Z,1513222633.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:13.509Z,1513222633.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:13.883Z,1513222633.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:13.898Z,1513222633.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:14.296Z,1513222634.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:14.306Z,1513222634.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:14.332Z,1513222634.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:14.694Z,1513222634.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:14.818Z,1513222634.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:15.096Z,1513222635.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:15.103Z,1513222635.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:15.179Z,1513222635.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:15.482Z,1513222635.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:15.497Z,1513222635.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:15.898Z,1513222635.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:15.915Z,1513222635.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:15.948Z,1513222635.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:16.285Z,1513222636.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:16.300Z,1513222636.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:16.683Z,1513222636.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:16.693Z,1513222636.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:16.700Z,1513222636.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:17.075Z,1513222637.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:17.101Z,1513222637.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:17.490Z,1513222637.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:17.494Z,1513222637.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:17.510Z,1513222637.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:17.897Z,1513222637.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:17.919Z,1513222637.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:18.285Z,1513222638.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:18.302Z,1513222638.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:18.317Z,1513222638.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:18.675Z,1513222638.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:18.702Z,1513222638.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:19.083Z,1513222639.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.085Z,1513222639.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.154Z,1513222639.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:19.483Z,1513222639.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.485Z,1513222639.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.501Z,1513222639.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:19.880Z,1513222639.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.890Z,1513222639.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:19.920Z,1513222639.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:20.292Z,1513222640.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:20.294Z,1513222640.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:20.310Z,1513222640.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:20.697Z,1513222640.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:20.700Z,1513222640.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:20.715Z,1513222640.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:21.086Z,1513222641.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:21.101Z,1513222641.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:21.130Z,1513222641.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:21.474Z,1513222641.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:21.505Z,1513222641.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:21.507Z,1513222641.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:21.875Z,1513222641.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:21.890Z,1513222641.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:21.909Z,1513222641.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:22.275Z,1513222642.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:22.295Z,1513222642.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:22.313Z,1513222642.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:22.691Z,1513222642.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:22.717Z,1513222642.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:22.766Z,1513222642.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:23.081Z,1513222643.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:23.096Z,1513222643.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:23.121Z,1513222643.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:23.493Z,1513222643.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:23.508Z,1513222643.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:23.525Z,1513222643.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:23.889Z,1513222643.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:23.911Z,1513222643.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:24.285Z,1513222644.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:24.300Z,1513222644.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:24.321Z,1513222644.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:24.680Z,1513222644.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:24.696Z,1513222644.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:25.080Z,1513222645.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:25.117Z,1513222645.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:25.144Z,1513222645.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:25.522Z,1513222645.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:25.526Z,1513222645.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:25.550Z,1513222645.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:25.889Z,1513222645.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:25.955Z,1513222645.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:26.294Z,1513222646.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:26.315Z,1513222646.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:26.317Z,1513222646.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:26.693Z,1513222646.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:26.708Z,1513222646.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:27.115Z,1513222647.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:27.118Z,1513222647.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:27.195Z,1513222647.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:27.475Z,1513222647.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:27.506Z,1513222647.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:27.553Z,1513222647.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:27.883Z,1513222647.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:27.912Z,1513222647.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:28.275Z,1513222648.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:28.326Z,1513222648.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:28.350Z,1513222648.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:28.679Z,1513222648.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:28.707Z,1513222648.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:29.117Z,1513222649.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:29.146Z,1513222649.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:29.235Z,1513222649.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:29.485Z,1513222649.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:29.500Z,1513222649.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:29.577Z,1513222649.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:29.889Z,1513222649.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:29.987Z,1513222649.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:30.297Z,1513222650.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:30.331Z,1513222650.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:30.373Z,1513222650.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:30.682Z,1513222650.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:30.703Z,1513222650.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:31.082Z,1513222651.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:31.103Z,1513222651.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:31.170Z,1513222651.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:31.483Z,1513222651.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:31.498Z,1513222651.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:31.573Z,1513222651.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:31.880Z,1513222651.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:31.899Z,1513222651.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:32.293Z,1513222652.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:32.307Z,1513222652.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:32.370Z,1513222652.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:32.699Z,1513222652.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:32.714Z,1513222652.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:33.094Z,1513222653.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:33.116Z,1513222653.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:33.166Z,1513222653.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:33.475Z,1513222653.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:33.496Z,1513222653.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:33.569Z,1513222653.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:33.881Z,1513222653.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:33.895Z,1513222653.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:34.279Z,1513222654.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:34.299Z,1513222654.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:34.366Z,1513222654.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:34.683Z,1513222654.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:34.703Z,1513222654.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:35.075Z,1513222655.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:35.103Z,1513222655.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:35.162Z,1513222655.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:35.535Z,1513222655.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:35.555Z,1513222655.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:35.565Z,1513222655.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:35.897Z,1513222655.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:35.919Z,1513222655.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:36.361Z,1513222656.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:37.157Z,1513222657.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:37.561Z,1513222657.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:38.357Z,1513222658.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.153Z,1513222659.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.379Z,1513222659.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.450Z,1513222659.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:39.532Z,1513222659.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.557Z,1513222659.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.575Z,1513222659.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:39.910Z,1513222659.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:39.928Z,1513222659.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:40.309Z,1513222660.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:40.324Z,1513222660.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:40.353Z,1513222660.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:40.709Z,1513222660.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:40.724Z,1513222660.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:41.146Z,1513222661.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:41.150Z,1513222661.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:41.170Z,1513222661.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:41.509Z,1513222661.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:41.548Z,1513222661.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:41.585Z,1513222661.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:41.927Z,1513222661.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:41.942Z,1513222661.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:42.331Z,1513222662.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:42.351Z,1513222662.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:42.381Z,1513222662.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:42.700Z,1513222662.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:42.715Z,1513222662.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:43.152Z,1513222663.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:43.178Z,1513222663.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:43.192Z,1513222663.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:43.508Z,1513222663.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:43.524Z,1513222663.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:43.581Z,1513222663.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:43.907Z,1513222663.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:43.922Z,1513222663.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:44.310Z,1513222664.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:44.325Z,1513222664.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:44.377Z,1513222664.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:44.713Z,1513222664.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:44.807Z,1513222664.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:45.118Z,1513222665.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:45.166Z,1513222665.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:45.174Z,1513222665.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:45.508Z,1513222665.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:45.531Z,1513222665.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:45.577Z,1513222665.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:45.906Z,1513222665.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:45.963Z,1513222665.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:46.308Z,1513222666.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:46.327Z,1513222666.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:46.373Z,1513222666.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:46.712Z,1513222666.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:46.791Z,1513222666.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:47.098Z,1513222667.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:47.124Z,1513222667.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:47.170Z,1513222667.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:47.523Z,1513222667.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:47.543Z,1513222667.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:47.573Z,1513222667.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:47.926Z,1513222667.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:47.941Z,1513222667.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:48.358Z,1513222668.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:48.369Z,1513222668.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:48.393Z,1513222668.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:48.715Z,1513222668.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:48.810Z,1513222668.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:49.110Z,1513222669.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:49.125Z,1513222669.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:49.166Z,1513222669.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:49.509Z,1513222669.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:49.524Z,1513222669.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:49.569Z,1513222669.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:49.905Z,1513222669.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:49.932Z,1513222669.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:50.318Z,1513222670.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:50.365Z,1513222670.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:50.387Z,1513222670.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:50.720Z,1513222670.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:50.809Z,1513222670.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:51.125Z,1513222671.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:51.140Z,1513222671.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:51.161Z,1513222671.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:51.523Z,1513222671.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:51.551Z,1513222671.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:51.566Z,1513222671.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:51.921Z,1513222671.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:51.935Z,1513222671.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:52.316Z,1513222672.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:52.331Z,1513222672.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:52.362Z,1513222672.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:52.700Z,1513222672.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:52.736Z,1513222672.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:53.112Z,1513222673.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:53.138Z,1513222673.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:53.157Z,1513222673.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:53.511Z,1513222673.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:53.548Z,1513222673.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:53.569Z,1513222673.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:53.924Z,1513222673.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:53.939Z,1513222673.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:54.328Z,1513222674.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:54.342Z,1513222674.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:54.365Z,1513222674.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:54.696Z,1513222674.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:54.738Z,1513222674.738 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:37:54.738Z,1513222674.738 [BPC1] Communications Fault, FailCount= 1
2017-12-14T03:37:54.738Z,1513222674.738 [BPC1](ERROR): Communications Fault
2017-12-14T03:37:54.762Z,1513222674.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:54.805Z,1513222674.805 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:37:55.139Z,1513222675.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:55.161Z,1513222675.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:55.178Z,1513222675.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:55.503Z,1513222675.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:55.530Z,1513222675.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:55.569Z,1513222675.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:55.899Z,1513222675.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:55.936Z,1513222675.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:55.951Z,1513222675.951 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:37:55.951Z,1513222675.951 [BPC1] No Fault, FailCount= 1
2017-12-14T03:37:56.317Z,1513222676.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:56.365Z,1513222676.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:56.399Z,1513222676.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:56.725Z,1513222676.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:56.740Z,1513222676.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:57.166Z,1513222677.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:57.180Z,1513222677.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:57.224Z,1513222677.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:57.503Z,1513222677.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:57.535Z,1513222677.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:57.569Z,1513222677.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:57.899Z,1513222677.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:57.956Z,1513222677.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:58.307Z,1513222678.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:58.327Z,1513222678.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:58.366Z,1513222678.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:58.708Z,1513222678.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:58.771Z,1513222678.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:59.111Z,1513222679.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:59.125Z,1513222679.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:59.162Z,1513222679.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:59.518Z,1513222679.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:59.538Z,1513222679.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:37:59.565Z,1513222679.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:59.922Z,1513222679.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:37:59.937Z,1513222679.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:00.320Z,1513222680.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:00.336Z,1513222680.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:00.361Z,1513222680.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:00.702Z,1513222680.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:00.799Z,1513222680.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:01.154Z,1513222681.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:01.158Z,1513222681.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:01.211Z,1513222681.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:01.505Z,1513222681.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:01.536Z,1513222681.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:01.561Z,1513222681.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:01.909Z,1513222681.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:01.923Z,1513222681.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:02.323Z,1513222682.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:02.353Z,1513222682.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:02.357Z,1513222682.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:02.713Z,1513222682.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:02.794Z,1513222682.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:03.114Z,1513222683.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:03.128Z,1513222683.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:03.153Z,1513222683.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:03.508Z,1513222683.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:03.527Z,1513222683.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:03.557Z,1513222683.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:03.912Z,1513222683.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:03.926Z,1513222683.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:04.306Z,1513222684.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:04.353Z,1513222684.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:04.357Z,1513222684.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:04.699Z,1513222684.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:04.798Z,1513222684.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:05.099Z,1513222685.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:05.130Z,1513222685.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:05.149Z,1513222685.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:05.517Z,1513222685.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:05.540Z,1513222685.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:05.553Z,1513222685.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:05.925Z,1513222685.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:05.940Z,1513222685.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:06.323Z,1513222686.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:06.343Z,1513222686.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:06.349Z,1513222686.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:06.696Z,1513222686.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:06.723Z,1513222686.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:07.104Z,1513222687.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:07.135Z,1513222687.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:07.146Z,1513222687.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:07.514Z,1513222687.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:07.549Z,1513222687.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:07.575Z,1513222687.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:07.907Z,1513222687.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:07.922Z,1513222687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:08.318Z,1513222688.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:08.333Z,1513222688.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:08.346Z,1513222688.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:08.716Z,1513222688.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:08.739Z,1513222688.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:09.142Z,1513222689.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:09.179Z,1513222689.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:09.210Z,1513222689.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:09.509Z,1513222689.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:09.524Z,1513222689.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:09.546Z,1513222689.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:09.898Z,1513222689.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:09.927Z,1513222689.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:10.296Z,1513222690.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:10.327Z,1513222690.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:10.341Z,1513222690.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:10.724Z,1513222690.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:10.752Z,1513222690.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:11.138Z,1513222691.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:11.169Z,1513222691.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:11.205Z,1513222691.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:11.510Z,1513222691.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:11.541Z,1513222691.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:11.551Z,1513222691.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:11.914Z,1513222691.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:11.928Z,1513222691.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:12.313Z,1513222692.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:12.327Z,1513222692.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:12.346Z,1513222692.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:12.713Z,1513222692.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:12.799Z,1513222692.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:13.102Z,1513222693.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:13.127Z,1513222693.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:13.142Z,1513222693.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:13.503Z,1513222693.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:13.526Z,1513222693.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:13.546Z,1513222693.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:13.913Z,1513222693.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:13.952Z,1513222693.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:14.322Z,1513222694.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:14.337Z,1513222694.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:14.341Z,1513222694.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:14.721Z,1513222694.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:14.801Z,1513222694.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:15.127Z,1513222695.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:15.138Z,1513222695.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:15.210Z,1513222695.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:15.503Z,1513222695.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:15.529Z,1513222695.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:15.541Z,1513222695.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:15.899Z,1513222695.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:15.931Z,1513222695.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:16.303Z,1513222696.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:16.337Z,1513222696.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:16.375Z,1513222696.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:16.699Z,1513222696.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:16.790Z,1513222696.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:17.130Z,1513222697.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:17.134Z,1513222697.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:17.216Z,1513222697.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:17.521Z,1513222697.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:17.537Z,1513222697.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:17.552Z,1513222697.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:17.920Z,1513222697.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:17.950Z,1513222697.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:18.318Z,1513222698.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:18.333Z,1513222698.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:18.356Z,1513222698.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:18.704Z,1513222698.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:18.719Z,1513222698.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:19.103Z,1513222699.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:19.123Z,1513222699.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:19.130Z,1513222699.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:19.506Z,1513222699.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:19.520Z,1513222699.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:19.533Z,1513222699.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:19.911Z,1513222699.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:19.925Z,1513222699.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:20.330Z,1513222700.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:20.342Z,1513222700.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:20.367Z,1513222700.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:20.718Z,1513222700.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:20.739Z,1513222700.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:21.117Z,1513222701.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:21.125Z,1513222701.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:21.135Z,1513222701.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:21.502Z,1513222701.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:21.524Z,1513222701.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:21.529Z,1513222701.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:21.902Z,1513222701.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:21.924Z,1513222701.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:22.316Z,1513222702.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:22.325Z,1513222702.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:22.339Z,1513222702.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:22.706Z,1513222702.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:22.728Z,1513222702.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:23.123Z,1513222703.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:23.157Z,1513222703.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:23.200Z,1513222703.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:23.549Z,1513222703.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:23.561Z,1513222703.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:23.591Z,1513222703.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:23.914Z,1513222703.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:23.934Z,1513222703.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:24.330Z,1513222704.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:24.346Z,1513222704.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:24.347Z,1513222704.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:24.699Z,1513222704.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:24.726Z,1513222704.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:25.142Z,1513222705.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:25.159Z,1513222705.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:25.203Z,1513222705.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:25.506Z,1513222705.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:25.561Z,1513222705.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:25.607Z,1513222705.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:25.907Z,1513222705.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:25.941Z,1513222705.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:26.317Z,1513222706.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:26.348Z,1513222706.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:26.357Z,1513222706.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:26.780Z,1513222706.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:26.830Z,1513222706.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:27.119Z,1513222707.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:27.134Z,1513222707.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:27.153Z,1513222707.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:27.498Z,1513222707.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:27.533Z,1513222707.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:27.557Z,1513222707.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:27.899Z,1513222707.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:27.924Z,1513222707.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:28.299Z,1513222708.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:28.331Z,1513222708.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:28.353Z,1513222708.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:28.699Z,1513222708.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:28.798Z,1513222708.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:29.100Z,1513222709.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:29.115Z,1513222709.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:29.150Z,1513222709.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:29.517Z,1513222709.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:29.544Z,1513222709.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:29.553Z,1513222709.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:29.922Z,1513222709.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:29.944Z,1513222709.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:30.326Z,1513222710.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:30.349Z,1513222710.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:30.353Z,1513222710.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:30.709Z,1513222710.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:30.763Z,1513222710.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:31.107Z,1513222711.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:31.127Z,1513222711.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:31.146Z,1513222711.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:31.509Z,1513222711.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:31.528Z,1513222711.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:31.549Z,1513222711.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:31.908Z,1513222711.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:31.927Z,1513222711.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:32.314Z,1513222712.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:32.330Z,1513222712.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:32.346Z,1513222712.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:32.718Z,1513222712.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:32.810Z,1513222712.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:33.142Z,1513222713.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:33.153Z,1513222713.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:33.196Z,1513222713.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:33.515Z,1513222713.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:33.531Z,1513222713.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:33.545Z,1513222713.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:33.898Z,1513222713.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:33.931Z,1513222713.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:34.299Z,1513222714.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:34.331Z,1513222714.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:34.341Z,1513222714.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:34.699Z,1513222714.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:34.725Z,1513222714.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:35.108Z,1513222715.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:35.137Z,1513222715.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:35.143Z,1513222715.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:35.521Z,1513222715.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:35.541Z,1513222715.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:35.552Z,1513222715.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:35.925Z,1513222715.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:35.952Z,1513222715.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:36.337Z,1513222716.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:36.365Z,1513222716.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:36.467Z,1513222716.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:37.133Z,1513222717.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:37.537Z,1513222717.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:38.333Z,1513222718.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:39.130Z,1513222719.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:39.533Z,1513222719.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:39.800Z,1513222719.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:39.815Z,1513222719.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:39.919Z,1513222719.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:39.962Z,1513222719.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:40.281Z,1513222720.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:40.313Z,1513222720.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:40.329Z,1513222720.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:40.685Z,1513222720.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:40.799Z,1513222720.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:41.082Z,1513222721.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:41.097Z,1513222721.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:41.126Z,1513222721.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:41.468Z,1513222721.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:41.522Z,1513222721.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:41.529Z,1513222721.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:41.872Z,1513222721.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:41.887Z,1513222721.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:42.276Z,1513222722.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:42.298Z,1513222722.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:42.325Z,1513222722.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:42.676Z,1513222722.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:42.692Z,1513222722.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:43.063Z,1513222723.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:43.086Z,1513222723.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:43.121Z,1513222723.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:43.476Z,1513222723.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:43.492Z,1513222723.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:43.525Z,1513222723.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:43.881Z,1513222723.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:43.897Z,1513222723.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:44.278Z,1513222724.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:44.292Z,1513222724.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:44.321Z,1513222724.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:44.669Z,1513222724.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:44.683Z,1513222724.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:45.084Z,1513222725.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:45.099Z,1513222725.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:45.117Z,1513222725.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:45.463Z,1513222725.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:45.491Z,1513222725.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:45.521Z,1513222725.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:45.860Z,1513222725.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:45.895Z,1513222725.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:46.293Z,1513222726.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:46.308Z,1513222726.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:46.317Z,1513222726.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:46.686Z,1513222726.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:46.700Z,1513222726.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:47.086Z,1513222727.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:47.111Z,1513222727.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:47.114Z,1513222727.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:47.475Z,1513222727.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:47.490Z,1513222727.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:47.517Z,1513222727.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:47.871Z,1513222727.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:47.887Z,1513222727.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:48.269Z,1513222728.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:48.291Z,1513222728.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:48.313Z,1513222728.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:48.668Z,1513222728.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:48.691Z,1513222728.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:49.072Z,1513222729.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:49.091Z,1513222729.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:49.109Z,1513222729.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:49.485Z,1513222729.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:49.500Z,1513222729.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:49.513Z,1513222729.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:49.884Z,1513222729.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:49.931Z,1513222729.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:50.282Z,1513222730.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:50.297Z,1513222730.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:50.317Z,1513222730.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:50.670Z,1513222730.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:50.689Z,1513222730.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:51.083Z,1513222731.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:51.115Z,1513222731.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:51.171Z,1513222731.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:51.463Z,1513222731.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:51.502Z,1513222731.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:51.541Z,1513222731.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:51.864Z,1513222731.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:51.899Z,1513222731.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:52.291Z,1513222732.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:52.322Z,1513222732.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:52.338Z,1513222732.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:52.677Z,1513222732.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:52.698Z,1513222732.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:53.126Z,1513222733.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:53.134Z,1513222733.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:53.179Z,1513222733.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:53.473Z,1513222733.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:53.511Z,1513222733.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:53.561Z,1513222733.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:53.869Z,1513222733.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:53.883Z,1513222733.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:54.269Z,1513222734.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:54.284Z,1513222734.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:54.357Z,1513222734.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:54.673Z,1513222734.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:54.688Z,1513222734.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:55.071Z,1513222735.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:55.087Z,1513222735.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:55.154Z,1513222735.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:55.495Z,1513222735.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:55.519Z,1513222735.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:55.557Z,1513222735.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:55.885Z,1513222735.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:55.899Z,1513222735.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:56.283Z,1513222736.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:56.298Z,1513222736.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:56.353Z,1513222736.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:56.668Z,1513222736.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:56.694Z,1513222736.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:57.091Z,1513222737.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:57.105Z,1513222737.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:57.150Z,1513222737.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:57.468Z,1513222737.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:57.492Z,1513222737.492 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:57.492Z,1513222737.492 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2017-12-14T03:38:57.492Z,1513222737.492 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:38:57.494Z,1513222737.494 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:57.494Z,1513222737.494 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2017-12-14T03:38:57.494Z,1513222737.494 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:38:57.496Z,1513222737.496 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:57.496Z,1513222737.496 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2017-12-14T03:38:57.496Z,1513222737.496 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:38:57.519Z,1513222737.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:38:57.519Z,1513222737.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:38:57.520Z,1513222737.520 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:38:57.554Z,1513222737.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:57.867Z,1513222737.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:57.913Z,1513222737.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:38:57.913Z,1513222737.913 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2017-12-14T03:38:57.914Z,1513222737.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:38:57.914Z,1513222737.914 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2017-12-14T03:38:57.914Z,1513222737.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:38:57.914Z,1513222737.914 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2017-12-14T03:38:58.278Z,1513222738.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:58.291Z,1513222738.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:38:58.292Z,1513222738.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:38:58.292Z,1513222738.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:38:58.301Z,1513222738.301 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:38:58.301Z,1513222738.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:38:58.302Z,1513222738.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:38:58.302Z,1513222738.302 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:38:58.302Z,1513222738.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:38:58.303Z,1513222738.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:38:58.350Z,1513222738.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:58.700Z,1513222738.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:58.806Z,1513222738.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:59.075Z,1513222739.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:59.105Z,1513222739.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:59.146Z,1513222739.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:59.475Z,1513222739.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:59.492Z,1513222739.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:38:59.549Z,1513222739.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:59.874Z,1513222739.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:38:59.895Z,1513222739.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:00.268Z,1513222740.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:00.305Z,1513222740.305 [BPC1](ERROR): Failed to parse message.
2017-12-14T03:39:00.305Z,1513222740.305 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T03:39:00.305Z,1513222740.305 [BPC1] Data Fault, FailCount= 1
2017-12-14T03:39:00.305Z,1513222740.305 [BPC1](ERROR): Data Fault
2017-12-14T03:39:00.323Z,1513222740.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:00.346Z,1513222740.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:00.349Z,1513222740.349 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T03:39:00.668Z,1513222740.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:00.697Z,1513222740.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:01.085Z,1513222741.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:01.099Z,1513222741.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:01.141Z,1513222741.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:01.481Z,1513222741.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:01.500Z,1513222741.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:01.522Z,1513222741.522 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:39:01.522Z,1513222741.522 [BPC1] No Fault, FailCount= 1
2017-12-14T03:39:01.546Z,1513222741.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:01.886Z,1513222741.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:01.982Z,1513222741.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:02.005Z,1513222742.005 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:39:02.281Z,1513222742.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:02.303Z,1513222742.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:02.341Z,1513222742.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:02.664Z,1513222742.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:02.691Z,1513222742.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:03.062Z,1513222743.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:03.079Z,1513222743.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:03.138Z,1513222743.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:03.468Z,1513222743.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:03.500Z,1513222743.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:03.541Z,1513222743.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:03.870Z,1513222743.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:03.891Z,1513222743.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:04.287Z,1513222744.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:04.315Z,1513222744.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:04.337Z,1513222744.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:04.681Z,1513222744.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:04.695Z,1513222744.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:05.134Z,1513222745.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:05.142Z,1513222745.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:05.187Z,1513222745.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:05.490Z,1513222745.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:05.505Z,1513222745.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:05.581Z,1513222745.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:05.886Z,1513222745.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:05.900Z,1513222745.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:06.277Z,1513222746.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:06.291Z,1513222746.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:06.377Z,1513222746.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:06.664Z,1513222746.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:06.690Z,1513222746.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:07.063Z,1513222747.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:07.155Z,1513222747.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:07.173Z,1513222747.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:07.478Z,1513222747.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:07.499Z,1513222747.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:07.577Z,1513222747.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:07.879Z,1513222747.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:07.894Z,1513222747.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:08.278Z,1513222748.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:08.347Z,1513222748.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:08.374Z,1513222748.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:08.660Z,1513222748.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:08.692Z,1513222748.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:09.062Z,1513222749.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:09.099Z,1513222749.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:09.169Z,1513222749.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:09.463Z,1513222749.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:09.499Z,1513222749.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:09.573Z,1513222749.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:09.858Z,1513222749.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:09.881Z,1513222749.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:10.274Z,1513222750.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:10.320Z,1513222750.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:10.369Z,1513222750.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:10.686Z,1513222750.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:10.702Z,1513222750.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:11.086Z,1513222751.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:11.112Z,1513222751.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:11.166Z,1513222751.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:11.473Z,1513222751.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:11.508Z,1513222751.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:11.570Z,1513222751.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:11.877Z,1513222751.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:11.892Z,1513222751.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:12.268Z,1513222752.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:12.283Z,1513222752.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:12.365Z,1513222752.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:12.668Z,1513222752.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:12.695Z,1513222752.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:13.071Z,1513222753.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:13.091Z,1513222753.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:13.162Z,1513222753.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:13.480Z,1513222753.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:13.503Z,1513222753.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:13.565Z,1513222753.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:13.886Z,1513222753.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:13.900Z,1513222753.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:14.290Z,1513222754.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:14.304Z,1513222754.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:14.361Z,1513222754.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:14.660Z,1513222754.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:14.712Z,1513222754.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:15.062Z,1513222755.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:15.097Z,1513222755.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:15.157Z,1513222755.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:15.464Z,1513222755.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:15.494Z,1513222755.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:15.561Z,1513222755.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:15.867Z,1513222755.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:15.899Z,1513222755.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:16.287Z,1513222756.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:16.301Z,1513222756.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:16.357Z,1513222756.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:16.688Z,1513222756.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:16.702Z,1513222756.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:17.073Z,1513222757.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:17.107Z,1513222757.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:17.153Z,1513222757.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:17.463Z,1513222757.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:17.498Z,1513222757.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:17.557Z,1513222757.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:17.863Z,1513222757.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:17.901Z,1513222757.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:18.279Z,1513222758.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:18.309Z,1513222758.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:18.353Z,1513222758.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:18.664Z,1513222758.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:18.679Z,1513222758.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:19.080Z,1513222759.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:19.162Z,1513222759.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:19.168Z,1513222759.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:19.478Z,1513222759.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:19.493Z,1513222759.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:19.565Z,1513222759.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:19.889Z,1513222759.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:19.920Z,1513222759.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:20.278Z,1513222760.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:20.293Z,1513222760.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:20.361Z,1513222760.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:20.676Z,1513222760.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:20.695Z,1513222760.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:21.158Z,1513222761.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:21.164Z,1513222761.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:21.243Z,1513222761.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:21.471Z,1513222761.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:21.505Z,1513222761.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:21.561Z,1513222761.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:21.871Z,1513222761.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:21.907Z,1513222761.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:22.281Z,1513222762.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:22.324Z,1513222762.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:22.699Z,1513222762.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:22.713Z,1513222762.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:23.075Z,1513222763.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:23.130Z,1513222763.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:23.466Z,1513222763.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:23.494Z,1513222763.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:23.875Z,1513222763.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:23.928Z,1513222763.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:24.271Z,1513222764.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:24.291Z,1513222764.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:24.681Z,1513222764.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:24.696Z,1513222764.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:25.068Z,1513222765.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:25.104Z,1513222765.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:25.488Z,1513222765.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:25.503Z,1513222765.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:25.886Z,1513222765.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:25.901Z,1513222765.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:26.288Z,1513222766.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:26.311Z,1513222766.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:26.664Z,1513222766.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:26.700Z,1513222766.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:27.074Z,1513222767.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:27.088Z,1513222767.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:27.473Z,1513222767.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:27.488Z,1513222767.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:27.865Z,1513222767.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:27.897Z,1513222767.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:28.285Z,1513222768.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:28.300Z,1513222768.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:28.688Z,1513222768.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:28.707Z,1513222768.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:29.074Z,1513222769.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:29.107Z,1513222769.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:29.471Z,1513222769.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:29.507Z,1513222769.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:29.871Z,1513222769.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:29.897Z,1513222769.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:30.267Z,1513222770.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:30.311Z,1513222770.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:30.673Z,1513222770.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:30.738Z,1513222770.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:31.063Z,1513222771.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:31.083Z,1513222771.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:31.482Z,1513222771.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:31.504Z,1513222771.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:31.896Z,1513222771.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:31.915Z,1513222771.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:32.282Z,1513222772.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:32.353Z,1513222772.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:32.663Z,1513222772.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:32.678Z,1513222772.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:33.088Z,1513222773.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:33.169Z,1513222773.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:33.477Z,1513222773.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:33.491Z,1513222773.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:33.875Z,1513222773.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:33.890Z,1513222773.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:34.281Z,1513222774.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:34.303Z,1513222774.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:34.682Z,1513222774.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:34.697Z,1513222774.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:35.116Z,1513222775.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:35.178Z,1513222775.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:35.467Z,1513222775.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:35.507Z,1513222775.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:35.867Z,1513222775.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:35.882Z,1513222775.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:36.271Z,1513222776.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:36.286Z,1513222776.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:36.677Z,1513222776.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:36.691Z,1513222776.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:40.334Z,1513222780.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:40.478Z,1513222780.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:40.499Z,1513222780.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:40.614Z,1513222780.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:40.647Z,1513222780.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:40.981Z,1513222780.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:40.996Z,1513222780.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:41.129Z,1513222781.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:41.379Z,1513222781.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:41.405Z,1513222781.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:41.533Z,1513222781.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:41.763Z,1513222781.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:41.795Z,1513222781.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:42.163Z,1513222782.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:42.196Z,1513222782.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:42.329Z,1513222782.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:42.563Z,1513222782.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:42.595Z,1513222782.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:42.963Z,1513222782.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:43.011Z,1513222783.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:43.125Z,1513222783.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:43.373Z,1513222783.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:43.389Z,1513222783.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:43.797Z,1513222783.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:43.812Z,1513222783.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:43.837Z,1513222783.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:44.181Z,1513222784.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:44.206Z,1513222784.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:44.574Z,1513222784.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:44.612Z,1513222784.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:44.634Z,1513222784.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:44.978Z,1513222784.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:45.015Z,1513222785.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:45.225Z,1513222785.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:45.372Z,1513222785.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:45.422Z,1513222785.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:45.770Z,1513222785.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:45.791Z,1513222785.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:46.021Z,1513222786.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:46.181Z,1513222786.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:46.235Z,1513222786.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:46.581Z,1513222786.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:46.596Z,1513222786.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:46.817Z,1513222786.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:46.978Z,1513222786.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:46.999Z,1513222786.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:47.382Z,1513222787.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:47.396Z,1513222787.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:47.513Z,1513222787.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:47.774Z,1513222787.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:47.788Z,1513222787.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:48.180Z,1513222788.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:48.196Z,1513222788.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:48.582Z,1513222788.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:48.596Z,1513222788.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:48.994Z,1513222788.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:49.027Z,1513222789.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:49.379Z,1513222789.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:49.411Z,1513222789.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:49.798Z,1513222789.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:49.819Z,1513222789.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:50.170Z,1513222790.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:50.186Z,1513222790.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:50.570Z,1513222790.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:50.585Z,1513222790.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:50.972Z,1513222790.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:50.987Z,1513222790.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:51.374Z,1513222791.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:51.388Z,1513222791.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:51.777Z,1513222791.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:51.792Z,1513222791.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:52.174Z,1513222792.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:52.188Z,1513222792.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:52.564Z,1513222792.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:52.585Z,1513222792.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:52.983Z,1513222792.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:53.019Z,1513222793.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:53.371Z,1513222793.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:53.391Z,1513222793.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:53.765Z,1513222793.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:53.779Z,1513222793.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:54.177Z,1513222794.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:54.192Z,1513222794.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:54.585Z,1513222794.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:54.632Z,1513222794.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:54.994Z,1513222794.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:55.018Z,1513222795.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:55.366Z,1513222795.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:55.396Z,1513222795.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:55.776Z,1513222795.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:55.790Z,1513222795.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:56.193Z,1513222796.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:56.226Z,1513222796.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:56.573Z,1513222796.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:56.588Z,1513222796.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:56.971Z,1513222796.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:56.991Z,1513222796.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:57.376Z,1513222797.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:57.396Z,1513222797.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:57.781Z,1513222797.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:57.796Z,1513222797.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:58.177Z,1513222798.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:58.192Z,1513222798.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:58.560Z,1513222798.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:58.583Z,1513222798.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:58.971Z,1513222798.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:58.986Z,1513222798.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:59.407Z,1513222799.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:59.433Z,1513222799.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:39:59.770Z,1513222799.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:39:59.785Z,1513222799.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:00.177Z,1513222800.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:00.192Z,1513222800.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:00.579Z,1513222800.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:00.619Z,1513222800.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:00.978Z,1513222800.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:00.993Z,1513222800.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:01.370Z,1513222801.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:01.386Z,1513222801.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:01.775Z,1513222801.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:01.789Z,1513222801.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:02.177Z,1513222802.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:02.192Z,1513222802.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:02.616Z,1513222802.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:02.639Z,1513222802.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:02.980Z,1513222802.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:02.998Z,1513222802.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:03.369Z,1513222803.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:03.390Z,1513222803.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:03.771Z,1513222803.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:03.786Z,1513222803.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:04.181Z,1513222804.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:04.195Z,1513222804.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:04.582Z,1513222804.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:04.596Z,1513222804.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:04.980Z,1513222804.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:04.998Z,1513222804.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:05.373Z,1513222805.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:05.403Z,1513222805.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:05.773Z,1513222805.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:05.824Z,1513222805.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:06.180Z,1513222806.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:06.199Z,1513222806.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:06.634Z,1513222806.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:06.691Z,1513222806.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:06.978Z,1513222806.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:07.001Z,1513222807.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:07.367Z,1513222807.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:07.394Z,1513222807.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:07.763Z,1513222807.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:07.835Z,1513222807.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:08.183Z,1513222808.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:08.198Z,1513222808.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:08.586Z,1513222808.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:08.642Z,1513222808.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:08.984Z,1513222808.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:09.038Z,1513222809.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:09.364Z,1513222809.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:09.389Z,1513222809.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:09.763Z,1513222809.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:09.794Z,1513222809.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:10.186Z,1513222810.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:10.201Z,1513222810.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:10.584Z,1513222810.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:10.599Z,1513222810.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:10.987Z,1513222810.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:11.009Z,1513222811.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:11.369Z,1513222811.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:11.383Z,1513222811.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:11.768Z,1513222811.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:11.814Z,1513222811.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:12.193Z,1513222812.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:12.227Z,1513222812.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:12.578Z,1513222812.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:12.592Z,1513222812.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:12.977Z,1513222812.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:12.992Z,1513222812.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:13.372Z,1513222813.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:13.388Z,1513222813.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:13.772Z,1513222813.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:13.786Z,1513222813.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:14.175Z,1513222814.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:14.194Z,1513222814.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:14.581Z,1513222814.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:14.596Z,1513222814.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:14.982Z,1513222814.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:14.996Z,1513222814.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:15.385Z,1513222815.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:15.421Z,1513222815.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:15.762Z,1513222815.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:15.799Z,1513222815.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:16.186Z,1513222816.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:16.201Z,1513222816.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:16.580Z,1513222816.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:16.596Z,1513222816.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:16.984Z,1513222816.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:17.028Z,1513222817.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:17.363Z,1513222817.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:17.402Z,1513222817.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:17.767Z,1513222817.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:17.798Z,1513222817.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:18.173Z,1513222818.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:18.203Z,1513222818.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:18.588Z,1513222818.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:18.658Z,1513222818.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:18.990Z,1513222818.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:19.010Z,1513222819.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:19.372Z,1513222819.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:19.403Z,1513222819.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:19.763Z,1513222819.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:19.777Z,1513222819.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:20.181Z,1513222820.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:20.207Z,1513222820.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:20.581Z,1513222820.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:20.606Z,1513222820.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:20.981Z,1513222820.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:21.006Z,1513222821.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:21.370Z,1513222821.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:21.385Z,1513222821.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:21.771Z,1513222821.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:21.786Z,1513222821.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:22.179Z,1513222822.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:22.239Z,1513222822.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:22.585Z,1513222822.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:22.600Z,1513222822.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:22.982Z,1513222822.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:23.003Z,1513222823.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:23.365Z,1513222823.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:23.403Z,1513222823.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:23.768Z,1513222823.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:23.803Z,1513222823.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:24.190Z,1513222824.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:24.205Z,1513222824.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:24.586Z,1513222824.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:24.608Z,1513222824.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:25.028Z,1513222825.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:25.071Z,1513222825.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:25.373Z,1513222825.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:25.388Z,1513222825.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:25.769Z,1513222825.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:25.785Z,1513222825.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:26.168Z,1513222826.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:26.188Z,1513222826.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:26.572Z,1513222826.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:26.587Z,1513222826.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:26.971Z,1513222826.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:26.991Z,1513222826.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:27.374Z,1513222827.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:27.389Z,1513222827.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:27.898Z,1513222827.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:27.919Z,1513222827.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:28.192Z,1513222828.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:28.227Z,1513222828.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:28.314Z,1513222828.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:28.570Z,1513222828.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:28.591Z,1513222828.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:28.975Z,1513222828.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:28.989Z,1513222828.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:29.110Z,1513222829.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:29.372Z,1513222829.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:29.438Z,1513222829.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:29.533Z,1513222829.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:29.771Z,1513222829.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:29.786Z,1513222829.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:30.177Z,1513222830.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:30.228Z,1513222830.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:30.329Z,1513222830.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:30.581Z,1513222830.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:30.596Z,1513222830.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:30.976Z,1513222830.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:31.025Z,1513222831.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:31.128Z,1513222831.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:31.363Z,1513222831.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:31.443Z,1513222831.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:31.533Z,1513222831.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:31.769Z,1513222831.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:31.784Z,1513222831.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:32.181Z,1513222832.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:32.207Z,1513222832.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:32.329Z,1513222832.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:32.573Z,1513222832.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:32.587Z,1513222832.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:32.986Z,1513222832.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:33.011Z,1513222833.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:33.125Z,1513222833.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:33.372Z,1513222833.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:33.388Z,1513222833.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:33.529Z,1513222833.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:33.770Z,1513222833.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:33.784Z,1513222833.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:34.177Z,1513222834.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:34.192Z,1513222834.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:34.623Z,1513222834.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:34.675Z,1513222834.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:34.981Z,1513222834.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:35.003Z,1513222835.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:35.370Z,1513222835.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:35.392Z,1513222835.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:35.774Z,1513222835.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:35.795Z,1513222835.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:35.798Z,1513222835.798 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T03:40:35.798Z,1513222835.798 [Default:CheckIn:C.Wait] Stopped
2017-12-14T03:40:35.798Z,1513222835.798 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T03:40:35.798Z,1513222835.798 [Default:CheckIn:D] Running Loop=1
2017-12-14T03:40:36.181Z,1513222836.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:36.196Z,1513222836.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:36.200Z,1513222836.200 [Default:CheckIn:D] Stopped
2017-12-14T03:40:36.200Z,1513222836.200 [Default:CheckIn:E] Running Loop=1
2017-12-14T03:40:36.583Z,1513222836.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:36.603Z,1513222836.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 187.346826 min 
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn:E] Stopped
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn] Stopped
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T03:40:36.607Z,1513222836.607 [Default:CheckIn](INFO): Running loop #19
2017-12-14T03:40:36.608Z,1513222836.608 [Default:CheckIn] Running Loop=19
2017-12-14T03:40:36.608Z,1513222836.608 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T03:40:36.608Z,1513222836.608 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T03:40:36.993Z,1513222836.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:37.015Z,1513222837.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:40.391Z,1513222840.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:40.433Z,1513222840.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:40.539Z,1513222840.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:40.559Z,1513222840.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:40.901Z,1513222840.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:40.928Z,1513222840.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:41.302Z,1513222841.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:41.333Z,1513222841.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:41.694Z,1513222841.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:41.727Z,1513222841.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:42.080Z,1513222842.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:42.132Z,1513222842.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:42.477Z,1513222842.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:42.500Z,1513222842.500 [PNI_TCM](ERROR): CRC does not match. Expected:0x7188 got:0x45199
2017-12-14T03:40:42.520Z,1513222842.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:42.896Z,1513222842.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:42.915Z,1513222842.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:43.306Z,1513222843.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:43.321Z,1513222843.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:43.710Z,1513222843.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:43.725Z,1513222843.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:44.126Z,1513222844.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:44.151Z,1513222844.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:44.485Z,1513222844.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:44.519Z,1513222844.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:44.878Z,1513222844.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:44.911Z,1513222844.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:45.279Z,1513222845.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:45.334Z,1513222845.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:45.701Z,1513222845.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:45.708Z,1513222845.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x31360 got:0x24576
2017-12-14T03:40:45.728Z,1513222845.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:46.078Z,1513222846.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:46.115Z,1513222846.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:46.502Z,1513222846.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:46.518Z,1513222846.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:46.913Z,1513222846.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:46.928Z,1513222846.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:47.322Z,1513222847.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:47.362Z,1513222847.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:47.688Z,1513222847.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:47.723Z,1513222847.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:48.090Z,1513222848.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:48.104Z,1513222848.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:48.486Z,1513222848.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:48.512Z,1513222848.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:48.901Z,1513222848.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:48.917Z,1513222848.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:49.300Z,1513222849.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:49.316Z,1513222849.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:49.701Z,1513222849.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:49.716Z,1513222849.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:50.106Z,1513222850.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:50.120Z,1513222850.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:50.519Z,1513222850.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:50.539Z,1513222850.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:50.883Z,1513222850.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:50.919Z,1513222850.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:51.282Z,1513222851.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:51.319Z,1513222851.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:51.683Z,1513222851.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:51.724Z,1513222851.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:52.083Z,1513222852.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:52.180Z,1513222852.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:52.502Z,1513222852.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:52.523Z,1513222852.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:52.894Z,1513222852.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:52.923Z,1513222852.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:53.305Z,1513222853.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:53.361Z,1513222853.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:53.732Z,1513222853.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:53.747Z,1513222853.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:54.095Z,1513222854.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:54.147Z,1513222854.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:54.492Z,1513222854.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:54.528Z,1513222854.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:54.886Z,1513222854.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:54.923Z,1513222854.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:55.315Z,1513222855.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:55.335Z,1513222855.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:55.713Z,1513222855.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:55.728Z,1513222855.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:56.097Z,1513222856.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:56.123Z,1513222856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:56.490Z,1513222856.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:56.527Z,1513222856.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:56.879Z,1513222856.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:56.917Z,1513222856.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:57.290Z,1513222857.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:57.304Z,1513222857.304 [PNI_TCM](ERROR): CRC does not match. Expected:0x55141 got:0x41760
2017-12-14T03:40:57.343Z,1513222857.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:57.697Z,1513222857.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:57.713Z,1513222857.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:58.090Z,1513222858.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:58.119Z,1513222858.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:58.506Z,1513222858.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:58.512Z,1513222858.512 [PNI_TCM](ERROR): CRC does not match. Expected:0x41981 got:0x53847
2017-12-14T03:40:58.554Z,1513222858.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:58.907Z,1513222858.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:59.040Z,1513222859.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:59.298Z,1513222859.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:59.319Z,1513222859.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:40:59.683Z,1513222859.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:40:59.715Z,1513222859.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:00.126Z,1513222860.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:00.163Z,1513222860.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:00.490Z,1513222860.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:00.504Z,1513222860.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:00.895Z,1513222860.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:00.910Z,1513222860.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:01.307Z,1513222861.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:01.336Z,1513222861.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:01.698Z,1513222861.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:01.712Z,1513222861.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:02.097Z,1513222862.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:02.138Z,1513222862.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:02.490Z,1513222862.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:02.528Z,1513222862.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:02.887Z,1513222862.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:02.912Z,1513222862.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:03.332Z,1513222863.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:03.351Z,1513222863.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:03.693Z,1513222863.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:03.717Z,1513222863.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:04.096Z,1513222864.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:04.111Z,1513222864.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:04.501Z,1513222864.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:04.518Z,1513222864.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:04.905Z,1513222864.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:04.927Z,1513222864.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:05.306Z,1513222865.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:05.329Z,1513222865.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:05.694Z,1513222865.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:05.708Z,1513222865.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:06.079Z,1513222866.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:06.112Z,1513222866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:06.514Z,1513222866.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:06.540Z,1513222866.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:06.882Z,1513222866.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:06.909Z,1513222866.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:07.292Z,1513222867.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:07.327Z,1513222867.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:07.713Z,1513222867.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:07.727Z,1513222867.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:08.108Z,1513222868.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:08.123Z,1513222868.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:08.482Z,1513222868.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:08.511Z,1513222868.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:08.885Z,1513222868.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:08.915Z,1513222868.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:09.279Z,1513222869.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:09.315Z,1513222869.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:09.719Z,1513222869.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:09.763Z,1513222869.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:10.095Z,1513222870.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:10.122Z,1513222870.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:10.491Z,1513222870.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:10.519Z,1513222870.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:10.894Z,1513222870.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:10.935Z,1513222870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:11.312Z,1513222871.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:11.328Z,1513222871.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:11.686Z,1513222871.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:11.730Z,1513222871.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:12.090Z,1513222872.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:12.124Z,1513222872.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:12.485Z,1513222872.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:12.527Z,1513222872.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:12.903Z,1513222872.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:12.932Z,1513222872.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:13.302Z,1513222873.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:13.331Z,1513222873.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:13.705Z,1513222873.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:13.732Z,1513222873.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:14.101Z,1513222874.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:14.125Z,1513222874.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:14.494Z,1513222874.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:14.549Z,1513222874.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:14.892Z,1513222874.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:14.947Z,1513222874.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:15.289Z,1513222875.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:15.316Z,1513222875.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:15.688Z,1513222875.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:15.782Z,1513222875.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:16.095Z,1513222876.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:16.101Z,1513222876.101 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T03:41:16.131Z,1513222876.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:16.502Z,1513222876.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:16.555Z,1513222876.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:16.910Z,1513222876.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:16.931Z,1513222876.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:17.294Z,1513222877.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:17.316Z,1513222877.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:17.691Z,1513222877.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:17.710Z,1513222877.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:18.095Z,1513222878.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:18.115Z,1513222878.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:18.498Z,1513222878.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:18.513Z,1513222878.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:18.886Z,1513222878.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:18.926Z,1513222878.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:19.330Z,1513222879.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:19.379Z,1513222879.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:19.709Z,1513222879.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:19.724Z,1513222879.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:20.093Z,1513222880.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:20.128Z,1513222880.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:20.507Z,1513222880.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:20.547Z,1513222880.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:20.904Z,1513222880.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:20.954Z,1513222880.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:21.295Z,1513222881.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:21.314Z,1513222881.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:21.714Z,1513222881.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:21.766Z,1513222881.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:22.081Z,1513222882.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:22.122Z,1513222882.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:22.508Z,1513222882.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:22.540Z,1513222882.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:22.944Z,1513222882.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:22.992Z,1513222882.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:23.297Z,1513222883.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:23.347Z,1513222883.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:23.682Z,1513222883.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:23.736Z,1513222883.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:24.080Z,1513222884.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:24.126Z,1513222884.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:24.504Z,1513222884.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:24.548Z,1513222884.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:24.895Z,1513222884.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:24.952Z,1513222884.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:25.305Z,1513222885.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:25.348Z,1513222885.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:25.709Z,1513222885.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:25.724Z,1513222885.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:26.103Z,1513222886.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:26.123Z,1513222886.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:26.515Z,1513222886.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:26.530Z,1513222886.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:26.878Z,1513222886.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:26.931Z,1513222886.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:27.307Z,1513222887.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:27.325Z,1513222887.325 [PNI_TCM](ERROR): CRC does not match. Expected:0x35629 got:0x77
2017-12-14T03:41:27.351Z,1513222887.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:27.687Z,1513222887.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:27.701Z,1513222887.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:28.102Z,1513222888.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:28.123Z,1513222888.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:28.499Z,1513222888.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:28.561Z,1513222888.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:28.914Z,1513222888.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:28.935Z,1513222888.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:29.346Z,1513222889.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:29.369Z,1513222889.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:29.687Z,1513222889.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:29.710Z,1513222889.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:30.110Z,1513222890.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:30.155Z,1513222890.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:30.497Z,1513222890.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:30.537Z,1513222890.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:30.894Z,1513222890.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:30.920Z,1513222890.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:31.320Z,1513222891.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:31.354Z,1513222891.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:31.713Z,1513222891.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:31.762Z,1513222891.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:32.102Z,1513222892.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:32.159Z,1513222892.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:32.524Z,1513222892.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:32.559Z,1513222892.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:32.895Z,1513222892.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:32.913Z,1513222892.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:33.307Z,1513222893.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:33.351Z,1513222893.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:33.723Z,1513222893.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:33.759Z,1513222893.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:34.094Z,1513222894.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:34.131Z,1513222894.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:34.491Z,1513222894.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:34.543Z,1513222894.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:34.899Z,1513222894.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:34.962Z,1513222894.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:35.314Z,1513222895.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:35.391Z,1513222895.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:35.684Z,1513222895.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:35.719Z,1513222895.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:36.094Z,1513222896.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:36.116Z,1513222896.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:36.507Z,1513222896.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:36.563Z,1513222896.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:36.910Z,1513222896.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:37.047Z,1513222897.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:37.304Z,1513222897.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:37.339Z,1513222897.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:41.646Z,1513222901.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:41.697Z,1513222901.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:41.802Z,1513222901.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:41.830Z,1513222901.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:42.151Z,1513222902.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:42.207Z,1513222902.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:42.556Z,1513222902.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:42.593Z,1513222902.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:42.959Z,1513222902.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:42.987Z,1513222902.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:43.361Z,1513222903.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:43.387Z,1513222903.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:43.777Z,1513222903.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:43.795Z,1513222903.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:44.158Z,1513222904.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:44.191Z,1513222904.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:44.548Z,1513222904.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:44.563Z,1513222904.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:44.951Z,1513222904.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:44.965Z,1513222904.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:45.348Z,1513222905.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:45.362Z,1513222905.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:45.752Z,1513222905.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:45.767Z,1513222905.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:46.165Z,1513222906.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:46.199Z,1513222906.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:46.554Z,1513222906.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:46.569Z,1513222906.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:46.967Z,1513222906.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:46.996Z,1513222906.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:47.348Z,1513222907.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:47.374Z,1513222907.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:47.747Z,1513222907.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:47.766Z,1513222907.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:48.156Z,1513222908.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:48.186Z,1513222908.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:48.561Z,1513222908.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:48.646Z,1513222908.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:48.958Z,1513222908.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:48.991Z,1513222908.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:49.343Z,1513222909.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:49.380Z,1513222909.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:49.746Z,1513222909.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:49.771Z,1513222909.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:50.162Z,1513222910.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:50.176Z,1513222910.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:50.560Z,1513222910.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:50.622Z,1513222910.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:50.966Z,1513222910.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:50.983Z,1513222910.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:51.343Z,1513222911.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:51.379Z,1513222911.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:51.746Z,1513222911.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:51.779Z,1513222911.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:52.173Z,1513222912.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:52.188Z,1513222912.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:52.313Z,1513222912.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:52.566Z,1513222912.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:52.580Z,1513222912.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:52.966Z,1513222912.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:52.981Z,1513222912.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:53.114Z,1513222913.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:53.344Z,1513222913.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:53.379Z,1513222913.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:53.521Z,1513222913.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:53.740Z,1513222913.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:53.755Z,1513222913.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:54.153Z,1513222914.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:54.180Z,1513222914.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:54.557Z,1513222914.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:54.582Z,1513222914.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:54.956Z,1513222914.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:54.000Z,1513222915.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:55.356Z,1513222915.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:55.379Z,1513222915.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:55.755Z,1513222915.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:55.769Z,1513222915.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:56.161Z,1513222916.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:56.176Z,1513222916.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:56.564Z,1513222916.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:56.584Z,1513222916.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:56.962Z,1513222916.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:56.983Z,1513222916.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:57.350Z,1513222917.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:57.377Z,1513222917.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:57.766Z,1513222917.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:57.818Z,1513222917.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:58.164Z,1513222918.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:58.178Z,1513222918.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:58.584Z,1513222918.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:58.599Z,1513222918.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:58.600Z,1513222918.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2017-12-14T03:41:58.600Z,1513222918.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:41:58.602Z,1513222918.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:58.602Z,1513222918.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2017-12-14T03:41:58.602Z,1513222918.602 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:41:58.604Z,1513222918.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:41:58.604Z,1513222918.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2017-12-14T03:41:58.604Z,1513222918.604 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:41:58.636Z,1513222918.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:41:58.636Z,1513222918.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:41:58.636Z,1513222918.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:41:58.966Z,1513222918.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:59.007Z,1513222919.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:41:59.007Z,1513222919.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2017-12-14T03:41:59.007Z,1513222919.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:41:59.007Z,1513222919.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2017-12-14T03:41:59.008Z,1513222919.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:41:59.008Z,1513222919.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2017-12-14T03:41:59.348Z,1513222919.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:59.365Z,1513222919.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:41:59.366Z,1513222919.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:41:59.366Z,1513222919.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:41:59.367Z,1513222919.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:41:59.367Z,1513222919.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:41:59.367Z,1513222919.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:41:59.368Z,1513222919.368 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:41:59.368Z,1513222919.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:41:59.368Z,1513222919.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:41:59.757Z,1513222919.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:41:59.797Z,1513222919.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:00.158Z,1513222920.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:00.173Z,1513222920.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:00.565Z,1513222920.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:00.598Z,1513222920.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:00.954Z,1513222920.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:00.970Z,1513222920.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:01.370Z,1513222921.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:01.390Z,1513222921.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:01.753Z,1513222921.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:01.775Z,1513222921.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:02.163Z,1513222922.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:02.183Z,1513222922.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:02.565Z,1513222922.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:02.642Z,1513222922.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:02.964Z,1513222922.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:02.983Z,1513222922.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:03.353Z,1513222923.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:03.369Z,1513222923.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:03.750Z,1513222923.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:03.810Z,1513222923.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:04.165Z,1513222924.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:04.179Z,1513222924.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:04.570Z,1513222924.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:04.624Z,1513222924.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:04.968Z,1513222924.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:05.015Z,1513222925.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:05.344Z,1513222925.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:05.384Z,1513222925.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:05.736Z,1513222925.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:05.771Z,1513222925.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:06.166Z,1513222926.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:06.182Z,1513222926.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:06.566Z,1513222926.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:06.581Z,1513222926.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:06.959Z,1513222926.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:06.982Z,1513222926.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:07.350Z,1513222927.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:07.377Z,1513222927.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:07.770Z,1513222927.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:07.836Z,1513222927.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:08.153Z,1513222928.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:08.192Z,1513222928.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:08.571Z,1513222928.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:08.587Z,1513222928.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:08.961Z,1513222928.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:08.982Z,1513222928.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:09.350Z,1513222929.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:09.364Z,1513222929.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:09.748Z,1513222929.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:09.775Z,1513222929.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:10.166Z,1513222930.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:10.180Z,1513222930.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:10.564Z,1513222930.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:10.579Z,1513222930.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:11.001Z,1513222931.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:11.030Z,1513222931.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:11.344Z,1513222931.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:11.371Z,1513222931.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:11.742Z,1513222931.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:11.779Z,1513222931.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:12.144Z,1513222932.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:12.170Z,1513222932.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:12.548Z,1513222932.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:12.575Z,1513222932.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:12.950Z,1513222932.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:13.014Z,1513222933.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:13.374Z,1513222933.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:13.388Z,1513222933.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:13.768Z,1513222933.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:13.782Z,1513222933.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:14.176Z,1513222934.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:14.204Z,1513222934.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:14.547Z,1513222934.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:14.586Z,1513222934.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:14.949Z,1513222934.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:14.983Z,1513222934.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:15.348Z,1513222935.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:15.362Z,1513222935.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:15.748Z,1513222935.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:15.767Z,1513222935.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:16.157Z,1513222936.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:16.192Z,1513222936.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:16.556Z,1513222936.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:16.586Z,1513222936.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:16.966Z,1513222936.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:16.990Z,1513222936.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:17.397Z,1513222937.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:17.443Z,1513222937.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:17.749Z,1513222937.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:17.764Z,1513222937.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:18.165Z,1513222938.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:18.190Z,1513222938.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:18.561Z,1513222938.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:18.587Z,1513222938.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:18.966Z,1513222938.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:18.990Z,1513222938.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:19.348Z,1513222939.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:19.372Z,1513222939.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:19.751Z,1513222939.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:19.766Z,1513222939.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:20.154Z,1513222940.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:20.168Z,1513222940.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:20.581Z,1513222940.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:20.605Z,1513222940.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:20.954Z,1513222940.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:21.008Z,1513222941.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:21.344Z,1513222941.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:21.379Z,1513222941.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:21.753Z,1513222941.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:21.769Z,1513222941.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:22.156Z,1513222942.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:22.171Z,1513222942.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:22.558Z,1513222942.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:22.572Z,1513222942.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:22.957Z,1513222942.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:22.979Z,1513222942.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:23.357Z,1513222943.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:23.372Z,1513222943.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:23.769Z,1513222943.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:23.792Z,1513222943.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:24.162Z,1513222944.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:24.180Z,1513222944.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:24.565Z,1513222944.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:24.584Z,1513222944.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:24.965Z,1513222944.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:25.039Z,1513222945.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:25.343Z,1513222945.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:25.376Z,1513222945.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:25.745Z,1513222945.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:25.791Z,1513222945.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:26.155Z,1513222946.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:26.191Z,1513222946.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:26.573Z,1513222946.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:26.611Z,1513222946.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:27.001Z,1513222947.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:27.031Z,1513222947.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:27.359Z,1513222947.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:27.388Z,1513222947.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:27.748Z,1513222947.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:27.762Z,1513222947.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:28.149Z,1513222948.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:28.163Z,1513222948.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:28.548Z,1513222948.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:28.568Z,1513222948.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:28.952Z,1513222948.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:28.967Z,1513222948.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:29.370Z,1513222949.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:29.413Z,1513222949.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:29.750Z,1513222949.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:29.789Z,1513222949.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:30.187Z,1513222950.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:30.220Z,1513222950.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:30.552Z,1513222950.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:30.567Z,1513222950.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:30.951Z,1513222950.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:30.965Z,1513222950.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:31.346Z,1513222951.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:31.368Z,1513222951.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:31.758Z,1513222951.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:31.772Z,1513222951.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:32.159Z,1513222952.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:32.178Z,1513222952.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:32.570Z,1513222952.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:32.584Z,1513222952.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:32.962Z,1513222952.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:32.977Z,1513222952.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:33.344Z,1513222953.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:33.387Z,1513222953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:33.763Z,1513222953.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:33.777Z,1513222953.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:34.158Z,1513222954.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:34.184Z,1513222954.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:34.590Z,1513222954.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:34.621Z,1513222954.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:34.965Z,1513222954.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:35.027Z,1513222955.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:35.358Z,1513222955.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:35.381Z,1513222955.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:35.749Z,1513222955.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:35.778Z,1513222955.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:36.157Z,1513222956.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:36.187Z,1513222956.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:36.600Z,1513222956.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:36.643Z,1513222956.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:36.962Z,1513222956.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:36.988Z,1513222956.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:37.344Z,1513222957.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:37.382Z,1513222957.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:41.017Z,1513222961.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:41.051Z,1513222961.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:41.149Z,1513222961.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:41.185Z,1513222961.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:41.513Z,1513222961.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:41.549Z,1513222961.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:41.926Z,1513222961.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:41.951Z,1513222961.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:42.308Z,1513222962.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:42.324Z,1513222962.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:42.708Z,1513222962.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:42.795Z,1513222962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:43.112Z,1513222963.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:43.136Z,1513222963.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:43.518Z,1513222963.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:43.539Z,1513222963.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:43.923Z,1513222963.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:43.943Z,1513222963.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:44.318Z,1513222964.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:44.344Z,1513222964.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:44.711Z,1513222964.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:44.795Z,1513222964.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:45.099Z,1513222965.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:45.151Z,1513222965.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:45.513Z,1513222965.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:45.528Z,1513222965.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:45.913Z,1513222965.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:45.928Z,1513222965.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:46.334Z,1513222966.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:46.367Z,1513222966.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:46.723Z,1513222966.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:46.743Z,1513222966.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:47.111Z,1513222967.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:47.187Z,1513222967.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:47.506Z,1513222967.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:47.521Z,1513222967.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:47.903Z,1513222967.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:47.918Z,1513222967.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:48.311Z,1513222968.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:48.371Z,1513222968.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:48.705Z,1513222968.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:48.720Z,1513222968.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:49.148Z,1513222969.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:49.208Z,1513222969.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:49.543Z,1513222969.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:49.563Z,1513222969.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:49.921Z,1513222969.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:49.935Z,1513222969.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:50.322Z,1513222970.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:50.336Z,1513222970.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:50.354Z,1513222970.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:50.696Z,1513222970.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:50.740Z,1513222970.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:51.149Z,1513222971.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:51.151Z,1513222971.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:51.186Z,1513222971.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:51.503Z,1513222971.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:51.528Z,1513222971.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:51.569Z,1513222971.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:51.892Z,1513222971.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:51.907Z,1513222971.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:52.310Z,1513222972.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:52.347Z,1513222972.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:52.787Z,1513222972.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:52.858Z,1513222972.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:53.118Z,1513222973.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:53.139Z,1513222973.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:53.499Z,1513222973.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:53.535Z,1513222973.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:53.902Z,1513222973.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:53.936Z,1513222973.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:54.303Z,1513222974.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:54.334Z,1513222974.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:54.699Z,1513222974.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:54.768Z,1513222974.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:55.110Z,1513222975.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:55.125Z,1513222975.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:55.518Z,1513222975.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:55.555Z,1513222975.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:55.920Z,1513222975.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:56.016Z,1513222976.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:56.320Z,1513222976.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:56.356Z,1513222976.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:56.696Z,1513222976.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:56.786Z,1513222976.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:57.126Z,1513222977.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:57.151Z,1513222977.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:57.503Z,1513222977.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:57.544Z,1513222977.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:57.905Z,1513222977.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:57.920Z,1513222977.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:58.323Z,1513222978.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:58.346Z,1513222978.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:58.717Z,1513222978.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:58.826Z,1513222978.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:59.127Z,1513222979.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:59.191Z,1513222979.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:59.499Z,1513222979.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:59.534Z,1513222979.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:42:59.902Z,1513222979.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:42:59.946Z,1513222979.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:00.295Z,1513222980.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:00.315Z,1513222980.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:00.703Z,1513222980.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:00.717Z,1513222980.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:01.099Z,1513222981.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:01.135Z,1513222981.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:01.511Z,1513222981.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:01.546Z,1513222981.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:01.929Z,1513222981.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:01.944Z,1513222981.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:02.309Z,1513222982.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:02.394Z,1513222982.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:02.696Z,1513222982.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:02.711Z,1513222982.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:03.149Z,1513222983.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:03.173Z,1513222983.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:03.509Z,1513222983.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:03.538Z,1513222983.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:03.929Z,1513222983.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:03.956Z,1513222983.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:04.321Z,1513222984.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:04.336Z,1513222984.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:04.726Z,1513222984.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:04.747Z,1513222984.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:05.159Z,1513222985.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:05.190Z,1513222985.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:05.510Z,1513222985.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:05.525Z,1513222985.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:05.904Z,1513222985.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:05.920Z,1513222985.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:06.309Z,1513222986.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:06.323Z,1513222986.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:06.708Z,1513222986.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:06.785Z,1513222986.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:07.109Z,1513222987.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:07.131Z,1513222987.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:07.528Z,1513222987.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:07.613Z,1513222987.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:07.918Z,1513222987.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:07.932Z,1513222987.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:08.319Z,1513222988.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:08.333Z,1513222988.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:08.706Z,1513222988.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:08.759Z,1513222988.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:09.098Z,1513222989.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:09.142Z,1513222989.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:09.500Z,1513222989.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:09.559Z,1513222989.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:09.900Z,1513222989.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:09.915Z,1513222989.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:10.317Z,1513222990.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:10.383Z,1513222990.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:10.718Z,1513222990.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:10.824Z,1513222990.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:11.114Z,1513222991.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:11.170Z,1513222991.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:11.508Z,1513222991.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:11.528Z,1513222991.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:11.912Z,1513222991.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:11.926Z,1513222991.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:12.306Z,1513222992.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:12.320Z,1513222992.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:12.707Z,1513222992.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:12.790Z,1513222992.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:13.098Z,1513222993.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:13.167Z,1513222993.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:13.510Z,1513222993.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:13.524Z,1513222993.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:13.922Z,1513222993.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:13.952Z,1513222993.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:14.321Z,1513222994.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:14.354Z,1513222994.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:14.705Z,1513222994.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:14.751Z,1513222994.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:15.106Z,1513222995.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:15.123Z,1513222995.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:15.506Z,1513222995.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:15.528Z,1513222995.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:15.906Z,1513222995.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:15.922Z,1513222995.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:16.344Z,1513222996.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:16.414Z,1513222996.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:16.725Z,1513222996.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:16.739Z,1513222996.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:17.175Z,1513222997.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:17.193Z,1513222997.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:17.510Z,1513222997.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:17.532Z,1513222997.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:17.902Z,1513222997.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:17.928Z,1513222997.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:18.292Z,1513222998.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:18.318Z,1513222998.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:18.706Z,1513222998.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:18.733Z,1513222998.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:19.167Z,1513222999.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:19.226Z,1513222999.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:19.526Z,1513222999.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:19.569Z,1513222999.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:19.928Z,1513222999.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:19.959Z,1513222999.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:20.314Z,1513223000.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:20.328Z,1513223000.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:20.709Z,1513223000.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:20.801Z,1513223000.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:21.107Z,1513223001.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:21.129Z,1513223001.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:21.506Z,1513223001.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:21.537Z,1513223001.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:21.896Z,1513223001.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:21.923Z,1513223001.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:22.321Z,1513223002.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:22.336Z,1513223002.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:22.775Z,1513223002.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:22.814Z,1513223002.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:23.110Z,1513223003.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:23.156Z,1513223003.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:23.499Z,1513223003.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:23.536Z,1513223003.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:23.899Z,1513223003.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:23.933Z,1513223003.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:24.303Z,1513223004.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:24.342Z,1513223004.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:24.703Z,1513223004.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:24.769Z,1513223004.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:25.113Z,1513223005.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:25.130Z,1513223005.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:25.514Z,1513223005.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:25.535Z,1513223005.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:25.919Z,1513223005.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:26.030Z,1513223006.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:26.312Z,1513223006.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:26.328Z,1513223006.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:26.707Z,1513223006.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:26.802Z,1513223006.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:27.098Z,1513223007.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:27.142Z,1513223007.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:27.513Z,1513223007.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:27.529Z,1513223007.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:27.900Z,1513223007.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:27.935Z,1513223007.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:28.322Z,1513223008.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:28.337Z,1513223008.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:28.724Z,1513223008.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:28.740Z,1513223008.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:29.112Z,1513223009.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:29.191Z,1513223009.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:29.508Z,1513223009.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:29.523Z,1513223009.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:29.908Z,1513223009.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:29.927Z,1513223009.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:30.304Z,1513223010.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:30.328Z,1513223010.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:30.709Z,1513223010.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:30.724Z,1513223010.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:31.168Z,1513223011.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:31.259Z,1513223011.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:31.510Z,1513223011.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:31.567Z,1513223011.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:31.921Z,1513223011.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:31.945Z,1513223011.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:32.338Z,1513223012.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:32.342Z,1513223012.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:32.370Z,1513223012.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:32.709Z,1513223012.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:32.758Z,1513223012.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:33.133Z,1513223013.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:33.152Z,1513223013.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:33.183Z,1513223013.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:33.501Z,1513223013.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:33.541Z,1513223013.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:33.564Z,1513223013.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:33.900Z,1513223013.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:33.927Z,1513223013.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:34.324Z,1513223014.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:34.339Z,1513223014.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:34.716Z,1513223014.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:34.811Z,1513223014.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:35.123Z,1513223015.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:35.158Z,1513223015.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:35.507Z,1513223015.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:35.563Z,1513223015.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:35.908Z,1513223015.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:35.924Z,1513223015.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:36.303Z,1513223016.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:36.318Z,1513223016.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:36.708Z,1513223016.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:36.786Z,1513223016.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:37.100Z,1513223017.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:37.138Z,1513223017.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:37.523Z,1513223017.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:37.540Z,1513223017.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:40.994Z,1513223020.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:41.024Z,1513223021.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:41.125Z,1513223021.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:41.172Z,1513223021.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:41.480Z,1513223021.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:41.495Z,1513223021.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:41.881Z,1513223021.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:41.928Z,1513223021.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:42.279Z,1513223022.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:42.373Z,1513223022.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:42.680Z,1513223022.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:42.695Z,1513223022.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:43.080Z,1513223023.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:43.103Z,1513223023.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:43.486Z,1513223023.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:43.501Z,1513223023.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:43.886Z,1513223023.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:43.907Z,1513223023.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:44.287Z,1513223024.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:44.301Z,1513223024.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:44.682Z,1513223024.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:44.699Z,1513223024.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:45.124Z,1513223025.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:45.192Z,1513223025.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:45.479Z,1513223025.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:45.495Z,1513223025.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:45.877Z,1513223025.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:45.892Z,1513223025.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:46.294Z,1513223026.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:46.317Z,1513223026.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:46.346Z,1513223026.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:46.681Z,1513223026.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:46.695Z,1513223026.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:47.143Z,1513223027.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:47.168Z,1513223027.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:47.183Z,1513223027.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:47.478Z,1513223027.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:47.493Z,1513223027.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:47.545Z,1513223027.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:47.876Z,1513223027.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:47.891Z,1513223027.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:48.287Z,1513223028.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:48.307Z,1513223028.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:48.691Z,1513223028.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:48.706Z,1513223028.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:49.083Z,1513223029.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:49.109Z,1513223029.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:49.490Z,1513223029.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:49.515Z,1513223029.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:49.900Z,1513223029.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:49.919Z,1513223029.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:50.289Z,1513223030.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:50.319Z,1513223030.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:50.676Z,1513223030.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:50.692Z,1513223030.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:51.078Z,1513223031.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:51.092Z,1513223031.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:51.474Z,1513223031.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:51.559Z,1513223031.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:51.887Z,1513223031.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:51.915Z,1513223031.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:52.285Z,1513223032.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:52.323Z,1513223032.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:52.706Z,1513223032.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:52.805Z,1513223032.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:53.090Z,1513223033.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:53.105Z,1513223033.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:53.471Z,1513223033.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:53.495Z,1513223033.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:53.871Z,1513223033.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:53.924Z,1513223033.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:54.271Z,1513223034.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:54.323Z,1513223034.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:54.694Z,1513223034.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:54.797Z,1513223034.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:55.079Z,1513223035.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:55.094Z,1513223035.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:55.488Z,1513223035.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:55.535Z,1513223035.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:55.890Z,1513223035.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:55.904Z,1513223035.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:56.290Z,1513223036.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:56.329Z,1513223036.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:56.680Z,1513223036.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:56.694Z,1513223036.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:57.085Z,1513223037.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:57.099Z,1513223037.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:57.482Z,1513223037.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:57.496Z,1513223037.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:57.878Z,1513223037.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:57.894Z,1513223037.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:58.288Z,1513223038.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:58.302Z,1513223038.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:58.689Z,1513223038.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:58.703Z,1513223038.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:59.099Z,1513223039.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:59.152Z,1513223039.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:59.479Z,1513223039.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:59.504Z,1513223039.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:43:59.870Z,1513223039.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:43:59.907Z,1513223039.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:00.271Z,1513223040.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:00.303Z,1513223040.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:00.671Z,1513223040.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:00.703Z,1513223040.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:01.123Z,1513223041.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:01.222Z,1513223041.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:01.498Z,1513223041.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:01.512Z,1513223041.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:01.898Z,1513223041.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:01.912Z,1513223041.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:02.295Z,1513223042.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:02.309Z,1513223042.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:02.682Z,1513223042.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:02.699Z,1513223042.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:03.090Z,1513223043.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:03.111Z,1513223043.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:03.471Z,1513223043.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:03.503Z,1513223043.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:03.876Z,1513223043.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:03.902Z,1513223043.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:04.291Z,1513223044.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:04.306Z,1513223044.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:04.694Z,1513223044.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:04.801Z,1513223044.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:05.086Z,1513223045.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:05.115Z,1513223045.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:05.148Z,1513223045.148 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T03:44:05.148Z,1513223045.148 [DropWeight] No Fault, FailCount= 1
2017-12-14T03:44:05.482Z,1513223045.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:05.497Z,1513223045.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:05.882Z,1513223045.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:05.896Z,1513223045.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:06.282Z,1513223046.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:06.297Z,1513223046.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:06.679Z,1513223046.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:06.699Z,1513223046.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:07.071Z,1513223047.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:07.099Z,1513223047.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:07.501Z,1513223047.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:07.543Z,1513223047.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:07.897Z,1513223047.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:07.916Z,1513223047.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:08.299Z,1513223048.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:08.314Z,1513223048.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:08.671Z,1513223048.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:08.699Z,1513223048.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:09.076Z,1513223049.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:09.104Z,1513223049.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:09.473Z,1513223049.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:09.507Z,1513223049.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:09.869Z,1513223049.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:09.915Z,1513223049.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:10.290Z,1513223050.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:10.319Z,1513223050.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:10.705Z,1513223050.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:10.765Z,1513223050.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:11.091Z,1513223051.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:11.106Z,1513223051.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:11.476Z,1513223051.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:11.504Z,1513223051.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:11.887Z,1513223051.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:11.903Z,1513223051.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:12.283Z,1513223052.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:12.305Z,1513223052.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:12.671Z,1513223052.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:12.704Z,1513223052.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:13.106Z,1513223053.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:13.171Z,1513223053.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:13.495Z,1513223053.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:13.515Z,1513223053.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:13.899Z,1513223053.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:13.916Z,1513223053.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:14.296Z,1513223054.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:14.319Z,1513223054.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:14.350Z,1513223054.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:14.675Z,1513223054.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:14.720Z,1513223054.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:15.105Z,1513223055.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:15.146Z,1513223055.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:15.162Z,1513223055.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:15.478Z,1513223055.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:15.492Z,1513223055.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:15.557Z,1513223055.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:15.878Z,1513223055.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:15.893Z,1513223055.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:16.287Z,1513223056.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:16.323Z,1513223056.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:16.690Z,1513223056.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:16.830Z,1513223056.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:17.109Z,1513223057.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:17.157Z,1513223057.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:17.478Z,1513223057.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:17.493Z,1513223057.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:17.882Z,1513223057.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:17.919Z,1513223057.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:18.279Z,1513223058.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:18.299Z,1513223058.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:18.680Z,1513223058.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:18.801Z,1513223058.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:19.084Z,1513223059.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:19.100Z,1513223059.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:19.493Z,1513223059.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:19.509Z,1513223059.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:19.890Z,1513223059.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:19.908Z,1513223059.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:20.296Z,1513223060.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:20.363Z,1513223060.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:20.669Z,1513223060.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:20.696Z,1513223060.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:21.081Z,1513223061.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:21.096Z,1513223061.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:21.477Z,1513223061.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:21.505Z,1513223061.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:21.866Z,1513223061.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:21.893Z,1513223061.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:22.289Z,1513223062.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:22.304Z,1513223062.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:22.706Z,1513223062.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:22.783Z,1513223062.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:23.091Z,1513223063.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:23.107Z,1513223063.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:23.497Z,1513223063.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:23.519Z,1513223063.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:23.871Z,1513223063.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:23.904Z,1513223063.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:24.275Z,1513223064.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:24.300Z,1513223064.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:24.672Z,1513223064.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:24.698Z,1513223064.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:25.076Z,1513223065.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:25.107Z,1513223065.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:25.487Z,1513223065.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:25.518Z,1513223065.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:25.897Z,1513223065.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:25.912Z,1513223065.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:26.288Z,1513223066.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:26.310Z,1513223066.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:26.686Z,1513223066.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:26.718Z,1513223066.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:27.143Z,1513223067.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:27.203Z,1513223067.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:27.476Z,1513223067.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:27.503Z,1513223067.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:27.875Z,1513223067.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:27.907Z,1513223067.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:28.289Z,1513223068.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:28.310Z,1513223068.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:28.694Z,1513223068.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:28.715Z,1513223068.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:29.119Z,1513223069.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:29.175Z,1513223069.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:29.475Z,1513223069.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:29.511Z,1513223069.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:29.932Z,1513223069.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:29.980Z,1513223069.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:30.268Z,1513223070.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:30.283Z,1513223070.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:30.346Z,1513223070.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:30.676Z,1513223070.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:30.690Z,1513223070.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:31.064Z,1513223071.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:31.091Z,1513223071.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:31.141Z,1513223071.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:31.492Z,1513223071.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:31.507Z,1513223071.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:31.545Z,1513223071.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:31.905Z,1513223071.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:31.920Z,1513223071.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:32.296Z,1513223072.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:32.311Z,1513223072.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:32.668Z,1513223072.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:32.699Z,1513223072.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:33.113Z,1513223073.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:33.156Z,1513223073.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:33.471Z,1513223073.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:33.506Z,1513223073.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:33.865Z,1513223073.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:33.888Z,1513223073.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:34.295Z,1513223074.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:34.315Z,1513223074.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:34.699Z,1513223074.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:34.715Z,1513223074.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:35.090Z,1513223075.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:35.115Z,1513223075.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:35.478Z,1513223075.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:35.492Z,1513223075.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:35.879Z,1513223075.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:35.893Z,1513223075.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:36.295Z,1513223076.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:36.331Z,1513223076.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:36.682Z,1513223076.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:36.699Z,1513223076.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:37.084Z,1513223077.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:37.099Z,1513223077.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:37.493Z,1513223077.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:37.509Z,1513223077.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:37.893Z,1513223077.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:37.908Z,1513223077.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:41.385Z,1513223081.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:41.456Z,1513223081.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:41.565Z,1513223081.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:41.595Z,1513223081.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:41.935Z,1513223081.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:41.950Z,1513223081.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:42.342Z,1513223082.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:42.357Z,1513223082.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:42.724Z,1513223082.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:42.791Z,1513223082.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:43.171Z,1513223083.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:43.202Z,1513223083.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:43.551Z,1513223083.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:43.596Z,1513223083.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:43.946Z,1513223083.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:43.961Z,1513223083.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:44.328Z,1513223084.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:44.363Z,1513223084.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:44.717Z,1513223084.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:44.811Z,1513223084.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:45.144Z,1513223085.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:45.183Z,1513223085.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:45.541Z,1513223085.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:45.575Z,1513223085.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:45.943Z,1513223085.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:46.002Z,1513223086.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:46.334Z,1513223086.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:46.350Z,1513223086.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:46.751Z,1513223086.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:46.806Z,1513223086.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:47.149Z,1513223087.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:47.165Z,1513223087.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:47.549Z,1513223087.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:47.564Z,1513223087.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:47.938Z,1513223087.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:47.965Z,1513223087.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:48.350Z,1513223088.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:48.364Z,1513223088.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:48.770Z,1513223088.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:48.811Z,1513223088.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:49.155Z,1513223089.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:49.175Z,1513223089.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:49.541Z,1513223089.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:49.565Z,1513223089.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:49.942Z,1513223089.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:49.967Z,1513223089.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:50.331Z,1513223090.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:50.363Z,1513223090.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:50.769Z,1513223090.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:50.826Z,1513223090.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:51.142Z,1513223091.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:51.174Z,1513223091.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:51.542Z,1513223091.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:51.573Z,1513223091.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:51.941Z,1513223091.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:51.992Z,1513223091.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:52.332Z,1513223092.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:52.380Z,1513223092.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:52.861Z,1513223092.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:52.915Z,1513223092.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:53.146Z,1513223093.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:53.179Z,1513223093.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:53.543Z,1513223093.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:53.575Z,1513223093.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:53.942Z,1513223093.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:53.972Z,1513223093.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:54.335Z,1513223094.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:54.351Z,1513223094.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:54.733Z,1513223094.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:54.750Z,1513223094.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:55.170Z,1513223095.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:55.210Z,1513223095.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:55.560Z,1513223095.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:55.583Z,1513223095.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:55.943Z,1513223095.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:55.967Z,1513223095.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:56.339Z,1513223096.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:56.355Z,1513223096.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:56.723Z,1513223096.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:56.758Z,1513223096.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:57.169Z,1513223097.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:57.215Z,1513223097.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:57.548Z,1513223097.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:57.564Z,1513223097.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:57.989Z,1513223097.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:58.045Z,1513223098.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:58.324Z,1513223098.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:58.351Z,1513223098.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:58.765Z,1513223098.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:58.804Z,1513223098.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:59.144Z,1513223099.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:59.187Z,1513223099.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:59.547Z,1513223099.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:59.576Z,1513223099.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:59.576Z,1513223099.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2017-12-14T03:44:59.576Z,1513223099.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:44:59.578Z,1513223099.578 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:59.578Z,1513223099.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2017-12-14T03:44:59.578Z,1513223099.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:44:59.580Z,1513223099.580 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:44:59.580Z,1513223099.580 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2017-12-14T03:44:59.580Z,1513223099.580 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:44:59.595Z,1513223099.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:44:59.595Z,1513223099.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:44:59.595Z,1513223099.595 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:44:59.949Z,1513223099.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:44:59.990Z,1513223099.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:44:59.990Z,1513223099.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2017-12-14T03:44:59.991Z,1513223099.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:44:59.991Z,1513223099.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2017-12-14T03:44:59.991Z,1513223099.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:44:59.991Z,1513223099.991 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2017-12-14T03:45:00.334Z,1513223100.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:00.348Z,1513223100.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:45:00.349Z,1513223100.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:45:00.349Z,1513223100.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:45:00.350Z,1513223100.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:45:00.350Z,1513223100.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:45:00.350Z,1513223100.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:45:00.351Z,1513223100.351 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:45:00.351Z,1513223100.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:45:00.351Z,1513223100.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:45:00.780Z,1513223100.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:00.831Z,1513223100.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:01.153Z,1513223101.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:01.168Z,1513223101.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:01.548Z,1513223101.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:01.563Z,1513223101.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:01.948Z,1513223101.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:01.962Z,1513223101.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:02.324Z,1513223102.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:02.368Z,1513223102.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:02.781Z,1513223102.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:02.807Z,1513223102.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:03.148Z,1513223103.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:03.183Z,1513223103.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:03.546Z,1513223103.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:03.573Z,1513223103.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:03.938Z,1513223103.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:03.994Z,1513223103.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:04.337Z,1513223104.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:04.414Z,1513223104.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:04.767Z,1513223104.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:04.876Z,1513223104.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:05.163Z,1513223105.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:05.227Z,1513223105.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:05.546Z,1513223105.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:05.576Z,1513223105.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:05.942Z,1513223105.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:05.983Z,1513223105.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:06.334Z,1513223106.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:06.351Z,1513223106.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:06.731Z,1513223106.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:06.748Z,1513223106.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:07.146Z,1513223107.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:07.162Z,1513223107.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:07.547Z,1513223107.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:07.562Z,1513223107.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:07.947Z,1513223107.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:07.962Z,1513223107.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:08.324Z,1513223108.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:08.410Z,1513223108.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:08.723Z,1513223108.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:08.751Z,1513223108.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:09.170Z,1513223109.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:09.204Z,1513223109.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:09.547Z,1513223109.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:09.567Z,1513223109.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:09.939Z,1513223109.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:09.955Z,1513223109.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:10.339Z,1513223110.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:10.353Z,1513223110.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:10.738Z,1513223110.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:10.841Z,1513223110.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:11.168Z,1513223111.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:11.214Z,1513223111.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:11.556Z,1513223111.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:11.607Z,1513223111.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:11.933Z,1513223111.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:11.963Z,1513223111.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:12.326Z,1513223112.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:12.353Z,1513223112.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:12.763Z,1513223112.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:12.817Z,1513223112.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:13.145Z,1513223113.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:13.180Z,1513223113.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:13.548Z,1513223113.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:13.573Z,1513223113.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:13.946Z,1513223113.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:13.975Z,1513223113.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:14.330Z,1513223114.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:14.385Z,1513223114.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:14.779Z,1513223114.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:14.850Z,1513223114.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:15.147Z,1513223115.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:15.175Z,1513223115.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:15.552Z,1513223115.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:15.575Z,1513223115.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:15.946Z,1513223115.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:15.961Z,1513223115.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:16.323Z,1513223116.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:16.358Z,1513223116.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:16.749Z,1513223116.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:16.827Z,1513223116.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:17.140Z,1513223117.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:17.180Z,1513223117.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:17.559Z,1513223117.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:17.575Z,1513223117.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:17.960Z,1513223117.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:17.975Z,1513223117.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:18.341Z,1513223118.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:18.370Z,1513223118.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:18.743Z,1513223118.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:18.819Z,1513223118.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:19.143Z,1513223119.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:19.163Z,1513223119.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:19.542Z,1513223119.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:19.563Z,1513223119.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:19.942Z,1513223119.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:19.957Z,1513223119.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:20.339Z,1513223120.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:20.355Z,1513223120.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:20.723Z,1513223120.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:20.824Z,1513223120.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:21.167Z,1513223121.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:21.216Z,1513223121.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:21.563Z,1513223121.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:21.578Z,1513223121.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:21.955Z,1513223121.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:21.970Z,1513223121.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:22.333Z,1513223122.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:22.363Z,1513223122.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:22.726Z,1513223122.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:22.740Z,1513223122.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:23.172Z,1513223123.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:23.199Z,1513223123.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:23.547Z,1513223123.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:23.572Z,1513223123.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:23.959Z,1513223123.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:23.974Z,1513223123.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:24.328Z,1513223124.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:24.400Z,1513223124.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:24.733Z,1513223124.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:24.749Z,1513223124.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:25.177Z,1513223125.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:25.205Z,1513223125.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:25.538Z,1513223125.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:25.554Z,1513223125.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:25.937Z,1513223125.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:25.956Z,1513223125.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:26.326Z,1513223126.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:26.403Z,1513223126.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:26.720Z,1513223126.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:26.815Z,1513223126.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:27.141Z,1513223127.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:27.168Z,1513223127.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:27.544Z,1513223127.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:27.610Z,1513223127.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:28.012Z,1513223128.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:28.070Z,1513223128.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:28.330Z,1513223128.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:28.380Z,1513223128.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:28.768Z,1513223128.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:28.827Z,1513223128.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:29.128Z,1513223129.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:29.155Z,1513223129.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:29.534Z,1513223129.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:29.551Z,1513223129.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:29.932Z,1513223129.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:29.948Z,1513223129.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:30.346Z,1513223130.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:30.380Z,1513223130.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:30.802Z,1513223130.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:30.828Z,1513223130.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:31.139Z,1513223131.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:31.157Z,1513223131.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:31.531Z,1513223131.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:31.554Z,1513223131.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:31.940Z,1513223131.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:31.955Z,1513223131.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:32.340Z,1513223132.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:32.356Z,1513223132.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:32.757Z,1513223132.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:32.860Z,1513223132.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:33.144Z,1513223133.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:33.180Z,1513223133.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:33.543Z,1513223133.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:33.575Z,1513223133.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:33.947Z,1513223133.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:33.979Z,1513223133.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:34.346Z,1513223134.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:34.361Z,1513223134.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:34.720Z,1513223134.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:34.747Z,1513223134.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:35.148Z,1513223135.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:35.176Z,1513223135.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:35.538Z,1513223135.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:35.559Z,1513223135.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:35.937Z,1513223135.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:35.953Z,1513223135.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:36.330Z,1513223136.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:36.350Z,1513223136.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:36.735Z,1513223136.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:36.792Z,1513223136.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:36.796Z,1513223136.796 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T03:40:36.6Z
2017-12-14T03:45:36.796Z,1513223136.796 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:45:36.796Z,1513223136.796 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:45:37.202Z,1513223137.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:37.242Z,1513223137.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:38.014Z,1513223138.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:38.064Z,1513223138.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:38.170Z,1513223138.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:38.185Z,1513223138.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:41.608Z,1513223141.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:41.622Z,1513223141.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:41.705Z,1513223141.705 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0076.lzma
2017-12-14T03:45:41.725Z,1513223141.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:41.741Z,1513223141.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:42.096Z,1513223142.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:42.122Z,1513223142.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:42.462Z,1513223142.462 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0076.lzma.bak
2017-12-14T03:45:42.462Z,1513223142.462 [DataOverHttps](INFO): SBD MOMSN=5437480
2017-12-14T03:45:42.515Z,1513223142.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:42.542Z,1513223142.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:43.919Z,1513223143.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:43.939Z,1513223143.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:44.043Z,1513223144.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:44.078Z,1513223144.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:47.514Z,1513223147.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:47.529Z,1513223147.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:47.629Z,1513223147.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:47.715Z,1513223147.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:48.034Z,1513223148.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:48.063Z,1513223148.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:48.436Z,1513223148.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:48.466Z,1513223148.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:48.905Z,1513223148.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:49.000Z,1513223149.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:49.232Z,1513223149.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:49.267Z,1513223149.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:52.618Z,1513223152.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:52.662Z,1513223152.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:52.742Z,1513223152.742 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0077.lzma
2017-12-14T03:45:52.773Z,1513223152.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:52.818Z,1513223152.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:53.172Z,1513223153.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:53.223Z,1513223153.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:53.491Z,1513223153.491 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0077.lzma.bak
2017-12-14T03:45:53.491Z,1513223153.491 [DataOverHttps](INFO): SBD MOMSN=5437482
2017-12-14T03:45:53.538Z,1513223153.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:53.562Z,1513223153.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:54.844Z,1513223154.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:54.883Z,1513223154.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:54.890Z,1513223154.890 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:45:54.890Z,1513223154.890 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:45:54.890Z,1513223154.890 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:45:54.967Z,1513223154.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:54.987Z,1513223154.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:58.360Z,1513223158.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:58.391Z,1513223158.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:58.498Z,1513223158.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:58.525Z,1513223158.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:58.850Z,1513223158.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:58.891Z,1513223158.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:59.261Z,1513223159.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:59.296Z,1513223159.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:45:59.654Z,1513223159.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:45:59.722Z,1513223159.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:00.049Z,1513223160.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:00.075Z,1513223160.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:00.466Z,1513223160.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:00.526Z,1513223160.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:00.847Z,1513223160.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:00.868Z,1513223160.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:01.252Z,1513223161.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:01.309Z,1513223161.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:01.654Z,1513223161.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:01.675Z,1513223161.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:02.054Z,1513223162.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:02.068Z,1513223162.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:02.449Z,1513223162.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:02.471Z,1513223162.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:02.880Z,1513223162.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:02.912Z,1513223162.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:03.251Z,1513223163.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:03.296Z,1513223163.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:03.670Z,1513223163.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:03.711Z,1513223163.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:04.039Z,1513223164.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:04.075Z,1513223164.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:04.463Z,1513223164.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:04.486Z,1513223164.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:04.871Z,1513223164.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:04.886Z,1513223164.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:05.262Z,1513223165.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:05.311Z,1513223165.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:05.688Z,1513223165.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:05.780Z,1513223165.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:06.039Z,1513223166.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:06.070Z,1513223166.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:06.444Z,1513223166.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:06.491Z,1513223166.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:06.846Z,1513223166.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:06.917Z,1513223166.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:07.254Z,1513223167.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:07.322Z,1513223167.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:07.657Z,1513223167.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:07.691Z,1513223167.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:08.049Z,1513223168.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:08.097Z,1513223168.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:08.451Z,1513223168.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:08.478Z,1513223168.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:08.855Z,1513223168.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:08.893Z,1513223168.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:09.244Z,1513223169.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:09.271Z,1513223169.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:09.654Z,1513223169.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:09.675Z,1513223169.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:10.060Z,1513223170.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:10.111Z,1513223170.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:10.457Z,1513223170.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:10.479Z,1513223170.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:10.861Z,1513223170.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:10.906Z,1513223170.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:11.258Z,1513223171.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:11.287Z,1513223171.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:11.652Z,1513223171.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:11.691Z,1513223171.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:12.044Z,1513223172.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:12.069Z,1513223172.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:12.440Z,1513223172.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:12.471Z,1513223172.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:12.839Z,1513223172.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:12.884Z,1513223172.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:13.305Z,1513223173.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:13.387Z,1513223173.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:13.657Z,1513223173.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:13.696Z,1513223173.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:14.058Z,1513223174.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:14.093Z,1513223174.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:14.448Z,1513223174.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:14.465Z,1513223174.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:14.847Z,1513223174.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:14.863Z,1513223174.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:15.264Z,1513223175.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:15.308Z,1513223175.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:15.648Z,1513223175.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:15.692Z,1513223175.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:16.050Z,1513223176.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:16.072Z,1513223176.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:16.453Z,1513223176.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:16.470Z,1513223176.470 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:46:16.470Z,1513223176.470 [BPC1] Communications Fault, FailCount= 1
2017-12-14T03:46:16.470Z,1513223176.470 [BPC1](ERROR): Communications Fault
2017-12-14T03:46:16.517Z,1513223176.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:16.553Z,1513223176.553 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:46:16.893Z,1513223176.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:16.908Z,1513223176.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:17.263Z,1513223177.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:17.296Z,1513223177.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:17.645Z,1513223177.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:17.660Z,1513223177.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:17.706Z,1513223177.706 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:46:17.706Z,1513223177.706 [BPC1] No Fault, FailCount= 1
2017-12-14T03:46:18.048Z,1513223178.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:18.107Z,1513223178.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:18.455Z,1513223178.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:18.475Z,1513223178.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:18.850Z,1513223178.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:18.865Z,1513223178.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:19.253Z,1513223179.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:19.284Z,1513223179.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:19.674Z,1513223179.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:19.725Z,1513223179.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:20.062Z,1513223180.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:20.107Z,1513223180.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:20.496Z,1513223180.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:20.520Z,1513223180.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:20.844Z,1513223180.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:20.884Z,1513223180.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:21.244Z,1513223181.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:21.321Z,1513223181.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:21.642Z,1513223181.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:21.690Z,1513223181.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:22.049Z,1513223182.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:22.103Z,1513223182.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:22.452Z,1513223182.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:22.490Z,1513223182.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:22.911Z,1513223182.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:22.943Z,1513223182.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:23.267Z,1513223183.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:23.323Z,1513223183.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:23.645Z,1513223183.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:23.688Z,1513223183.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:24.048Z,1513223184.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:24.087Z,1513223184.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:24.447Z,1513223184.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:24.486Z,1513223184.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:24.846Z,1513223184.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:24.861Z,1513223184.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:25.286Z,1513223185.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:25.322Z,1513223185.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:25.657Z,1513223185.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:25.688Z,1513223185.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:26.107Z,1513223186.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:26.118Z,1513223186.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x2759 got:0x15778
2017-12-14T03:46:26.222Z,1513223186.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:26.452Z,1513223186.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:26.504Z,1513223186.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:26.847Z,1513223186.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:26.861Z,1513223186.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:27.251Z,1513223187.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:27.278Z,1513223187.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:27.664Z,1513223187.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:27.683Z,1513223187.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:28.088Z,1513223188.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:28.120Z,1513223188.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:28.462Z,1513223188.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:28.495Z,1513223188.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:28.866Z,1513223188.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:28.915Z,1513223188.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:29.264Z,1513223189.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:29.319Z,1513223189.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:29.641Z,1513223189.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:29.731Z,1513223189.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:30.043Z,1513223190.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:30.131Z,1513223190.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:30.440Z,1513223190.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:30.479Z,1513223190.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:30.875Z,1513223190.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:30.915Z,1513223190.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:31.259Z,1513223191.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:31.292Z,1513223191.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:31.655Z,1513223191.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:31.726Z,1513223191.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:32.050Z,1513223192.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:32.091Z,1513223192.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:32.447Z,1513223192.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:32.471Z,1513223192.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:32.911Z,1513223192.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:32.947Z,1513223192.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:33.250Z,1513223193.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:33.295Z,1513223193.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:33.650Z,1513223193.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:33.699Z,1513223193.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:34.131Z,1513223194.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:34.162Z,1513223194.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:34.469Z,1513223194.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:34.511Z,1513223194.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:34.865Z,1513223194.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:34.915Z,1513223194.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:35.269Z,1513223195.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:35.290Z,1513223195.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:35.674Z,1513223195.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:35.719Z,1513223195.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:36.039Z,1513223196.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:36.104Z,1513223196.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:36.446Z,1513223196.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:36.502Z,1513223196.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:36.892Z,1513223196.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:36.968Z,1513223196.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:37.287Z,1513223197.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:37.315Z,1513223197.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:37.655Z,1513223197.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:37.711Z,1513223197.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:38.054Z,1513223198.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:38.110Z,1513223198.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:38.449Z,1513223198.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:38.504Z,1513223198.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:38.842Z,1513223198.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:38.911Z,1513223198.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:39.260Z,1513223199.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:39.320Z,1513223199.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:39.642Z,1513223199.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:39.718Z,1513223199.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:40.083Z,1513223200.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:40.134Z,1513223200.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:40.467Z,1513223200.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:40.526Z,1513223200.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:40.858Z,1513223200.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:40.895Z,1513223200.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:41.285Z,1513223201.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:41.362Z,1513223201.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:41.679Z,1513223201.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:41.706Z,1513223201.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:42.053Z,1513223202.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:42.092Z,1513223202.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:42.450Z,1513223202.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:42.543Z,1513223202.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:42.860Z,1513223202.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:42.921Z,1513223202.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:43.292Z,1513223203.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:43.311Z,1513223203.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:43.658Z,1513223203.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:43.715Z,1513223203.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:44.076Z,1513223204.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:44.121Z,1513223204.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:44.463Z,1513223204.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:44.516Z,1513223204.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:44.861Z,1513223204.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:44.874Z,1513223204.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x31216 got:0x49060
2017-12-14T03:46:44.927Z,1513223204.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:45.241Z,1513223205.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:45.283Z,1513223205.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:45.640Z,1513223205.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:45.679Z,1513223205.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:46.044Z,1513223206.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:46.059Z,1513223206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:46.422Z,1513223206.422 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:46:46.423Z,1513223206.423 [NAL9602] Data Fault, FailCount= 3
2017-12-14T03:46:46.423Z,1513223206.423 [NAL9602](ERROR): Data Fault
2017-12-14T03:46:46.439Z,1513223206.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:46.485Z,1513223206.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:46.511Z,1513223206.511 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:46:46.830Z,1513223206.830 [NAL9602](INFO): Powering down
2017-12-14T03:46:46.848Z,1513223206.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:46.880Z,1513223206.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:47.240Z,1513223207.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:47.275Z,1513223207.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:47.639Z,1513223207.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:47.684Z,1513223207.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:47.697Z,1513223207.697 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:46:47.697Z,1513223207.697 [NAL9602] No Fault, FailCount= 3
2017-12-14T03:46:48.042Z,1513223208.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:48.092Z,1513223208.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:48.442Z,1513223208.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:48.475Z,1513223208.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:48.843Z,1513223208.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:48.875Z,1513223208.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:49.251Z,1513223209.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:49.284Z,1513223209.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:49.639Z,1513223209.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:49.688Z,1513223209.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:50.043Z,1513223210.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:50.076Z,1513223210.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:50.442Z,1513223210.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:50.457Z,1513223210.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:50.848Z,1513223210.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:50.862Z,1513223210.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:51.246Z,1513223211.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:51.282Z,1513223211.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:51.650Z,1513223211.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:51.664Z,1513223211.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:52.057Z,1513223212.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:52.071Z,1513223212.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:52.482Z,1513223212.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:52.526Z,1513223212.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:52.843Z,1513223212.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:52.887Z,1513223212.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:53.242Z,1513223213.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:53.277Z,1513223213.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:53.647Z,1513223213.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:53.676Z,1513223213.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:54.047Z,1513223214.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:54.084Z,1513223214.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:54.448Z,1513223214.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:54.487Z,1513223214.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:54.843Z,1513223214.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:54.860Z,1513223214.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:55.250Z,1513223215.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:55.289Z,1513223215.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:58.899Z,1513223218.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:59.002Z,1513223219.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:59.115Z,1513223219.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:59.147Z,1513223219.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:59.508Z,1513223219.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:59.550Z,1513223219.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:46:59.908Z,1513223219.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:46:59.923Z,1513223219.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:00.303Z,1513223220.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:00.367Z,1513223220.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:00.708Z,1513223220.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:00.723Z,1513223220.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:01.157Z,1513223221.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:01.211Z,1513223221.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:01.505Z,1513223221.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:01.522Z,1513223221.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:01.907Z,1513223221.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:01.949Z,1513223221.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:02.309Z,1513223222.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:02.323Z,1513223222.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:02.704Z,1513223222.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:02.719Z,1513223222.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:03.150Z,1513223223.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:03.190Z,1513223223.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:03.499Z,1513223223.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:03.532Z,1513223223.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:03.896Z,1513223223.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:03.927Z,1513223223.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:04.310Z,1513223224.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:04.324Z,1513223224.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:04.712Z,1513223224.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:04.815Z,1513223224.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:05.097Z,1513223225.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:05.123Z,1513223225.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:05.499Z,1513223225.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:05.535Z,1513223225.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:05.900Z,1513223225.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:05.927Z,1513223225.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:06.296Z,1513223226.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:06.327Z,1513223226.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:06.702Z,1513223226.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:06.792Z,1513223226.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:07.103Z,1513223227.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:07.131Z,1513223227.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:07.506Z,1513223227.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:07.533Z,1513223227.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:07.899Z,1513223227.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:07.930Z,1513223227.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:08.303Z,1513223228.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:08.355Z,1513223228.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:08.705Z,1513223228.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:08.786Z,1513223228.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:09.098Z,1513223229.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:09.126Z,1513223229.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:09.498Z,1513223229.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:09.535Z,1513223229.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:09.897Z,1513223229.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:09.924Z,1513223229.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:10.303Z,1513223230.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:10.356Z,1513223230.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:10.700Z,1513223230.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:10.798Z,1513223230.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:11.106Z,1513223231.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:11.124Z,1513223231.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:11.505Z,1513223231.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:11.520Z,1513223231.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:11.909Z,1513223231.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:11.924Z,1513223231.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:12.342Z,1513223232.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:12.358Z,1513223232.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:12.705Z,1513223232.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:12.720Z,1513223232.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:13.098Z,1513223233.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:13.140Z,1513223233.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:13.507Z,1513223233.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:13.522Z,1513223233.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:13.909Z,1513223233.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:13.923Z,1513223233.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:14.306Z,1513223234.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:14.322Z,1513223234.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:14.741Z,1513223234.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:14.763Z,1513223234.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:15.140Z,1513223235.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:15.183Z,1513223235.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:15.503Z,1513223235.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:15.528Z,1513223235.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:15.898Z,1513223235.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:15.932Z,1513223235.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:16.298Z,1513223236.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:16.331Z,1513223236.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:16.700Z,1513223236.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:16.727Z,1513223236.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:17.123Z,1513223237.123 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:47:17.169Z,1513223237.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:17.196Z,1513223237.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:17.503Z,1513223237.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:17.540Z,1513223237.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:17.926Z,1513223237.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:17.951Z,1513223237.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:18.310Z,1513223238.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:18.341Z,1513223238.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:18.706Z,1513223238.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:18.785Z,1513223238.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:19.114Z,1513223239.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:19.129Z,1513223239.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:19.508Z,1513223239.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:19.527Z,1513223239.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:19.916Z,1513223239.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:19.931Z,1513223239.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:20.310Z,1513223240.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:20.325Z,1513223240.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:20.710Z,1513223240.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:20.841Z,1513223240.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:21.127Z,1513223241.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:21.149Z,1513223241.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:21.522Z,1513223241.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:21.537Z,1513223241.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:21.899Z,1513223241.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:21.927Z,1513223241.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:22.302Z,1513223242.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:22.336Z,1513223242.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:22.696Z,1513223242.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:22.710Z,1513223242.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:23.107Z,1513223243.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:23.122Z,1513223243.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:23.504Z,1513223243.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:23.530Z,1513223243.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:23.906Z,1513223243.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:23.922Z,1513223243.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:24.331Z,1513223244.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:24.360Z,1513223244.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:24.707Z,1513223244.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:24.805Z,1513223244.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:25.111Z,1513223245.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:25.125Z,1513223245.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:25.506Z,1513223245.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:25.518Z,1513223245.518 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:47:25.518Z,1513223245.518 [BPC1] Communications Fault, FailCount= 1
2017-12-14T03:47:25.518Z,1513223245.518 [BPC1](ERROR): Communications Fault
2017-12-14T03:47:25.534Z,1513223245.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:25.570Z,1513223245.570 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:47:25.899Z,1513223245.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:25.935Z,1513223245.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:26.303Z,1513223246.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:26.337Z,1513223246.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:26.698Z,1513223246.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:26.725Z,1513223246.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:26.748Z,1513223246.748 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:47:26.748Z,1513223246.748 [BPC1] No Fault, FailCount= 1
2017-12-14T03:47:27.110Z,1513223247.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:27.199Z,1513223247.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:27.535Z,1513223247.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:27.598Z,1513223247.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:27.909Z,1513223247.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:27.940Z,1513223247.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:28.287Z,1513223248.287 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:47:28.304Z,1513223248.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:28.320Z,1513223248.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:28.704Z,1513223248.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:28.718Z,1513223248.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:29.170Z,1513223249.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:29.252Z,1513223249.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:29.521Z,1513223249.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:29.555Z,1513223249.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:29.913Z,1513223249.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:29.952Z,1513223249.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:30.306Z,1513223250.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:30.321Z,1513223250.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:30.715Z,1513223250.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:30.759Z,1513223250.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:31.146Z,1513223251.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:31.173Z,1513223251.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:31.514Z,1513223251.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:31.528Z,1513223251.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:31.922Z,1513223251.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:31.957Z,1513223251.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:32.313Z,1513223252.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:32.335Z,1513223252.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:32.708Z,1513223252.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:32.841Z,1513223252.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:33.103Z,1513223253.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:33.129Z,1513223253.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:33.499Z,1513223253.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:33.531Z,1513223253.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:33.934Z,1513223253.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:33.981Z,1513223253.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:34.299Z,1513223254.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:34.335Z,1513223254.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:34.709Z,1513223254.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:34.801Z,1513223254.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:35.114Z,1513223255.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:35.129Z,1513223255.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:35.514Z,1513223255.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:35.563Z,1513223255.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:35.908Z,1513223255.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:35.923Z,1513223255.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:36.317Z,1513223256.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:36.332Z,1513223256.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:36.714Z,1513223256.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:36.809Z,1513223256.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:37.134Z,1513223257.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:37.163Z,1513223257.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:37.526Z,1513223257.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:37.541Z,1513223257.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:37.922Z,1513223257.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:37.937Z,1513223257.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:38.319Z,1513223258.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:38.339Z,1513223258.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:38.709Z,1513223258.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:38.795Z,1513223258.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:39.133Z,1513223259.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:39.148Z,1513223259.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:39.500Z,1513223259.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:39.527Z,1513223259.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:39.915Z,1513223259.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:39.930Z,1513223259.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:40.299Z,1513223260.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:40.335Z,1513223260.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:40.709Z,1513223260.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:40.736Z,1513223260.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:41.121Z,1513223261.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:41.171Z,1513223261.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:41.510Z,1513223261.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:41.525Z,1513223261.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:41.908Z,1513223261.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:41.923Z,1513223261.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:42.308Z,1513223262.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:42.323Z,1513223262.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:42.706Z,1513223262.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:42.723Z,1513223262.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:43.150Z,1513223263.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:43.171Z,1513223263.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:43.542Z,1513223263.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:43.569Z,1513223263.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:43.918Z,1513223263.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:43.933Z,1513223263.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:44.317Z,1513223264.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:44.332Z,1513223264.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:44.715Z,1513223264.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:44.730Z,1513223264.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:45.148Z,1513223265.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:45.179Z,1513223265.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:45.503Z,1513223265.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:45.535Z,1513223265.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:45.904Z,1513223265.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:45.943Z,1513223265.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:46.299Z,1513223266.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:46.391Z,1513223266.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:46.790Z,1513223266.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:46.824Z,1513223266.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:47.122Z,1513223267.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:47.166Z,1513223267.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:47.523Z,1513223267.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:47.554Z,1513223267.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:47.907Z,1513223267.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:47.952Z,1513223267.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:48.306Z,1513223268.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:48.320Z,1513223268.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:48.702Z,1513223268.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:48.755Z,1513223268.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:49.099Z,1513223269.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:49.131Z,1513223269.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:49.516Z,1513223269.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:49.551Z,1513223269.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:49.926Z,1513223269.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:49.941Z,1513223269.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:50.308Z,1513223270.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:50.336Z,1513223270.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:50.703Z,1513223270.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:50.803Z,1513223270.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:51.101Z,1513223271.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:51.115Z,1513223271.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:51.508Z,1513223271.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:51.522Z,1513223271.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:51.902Z,1513223271.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:51.917Z,1513223271.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:52.310Z,1513223272.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:52.324Z,1513223272.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:52.728Z,1513223272.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:52.819Z,1513223272.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:53.146Z,1513223273.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:53.178Z,1513223273.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:53.518Z,1513223273.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:53.539Z,1513223273.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:53.915Z,1513223273.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:53.930Z,1513223273.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:54.311Z,1513223274.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:54.326Z,1513223274.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:54.709Z,1513223274.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:54.836Z,1513223274.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:55.104Z,1513223275.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:55.118Z,1513223275.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:55.518Z,1513223275.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:55.544Z,1513223275.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:58.911Z,1513223278.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:58.970Z,1513223278.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:59.128Z,1513223279.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:59.186Z,1513223279.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:59.422Z,1513223279.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:59.456Z,1513223279.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:47:59.831Z,1513223279.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:47:59.848Z,1513223279.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:00.231Z,1513223280.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:00.246Z,1513223280.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:00.638Z,1513223280.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:00.653Z,1513223280.653 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:00.653Z,1513223280.653 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2017-12-14T03:48:00.653Z,1513223280.653 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:48:00.655Z,1513223280.655 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:00.655Z,1513223280.655 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2017-12-14T03:48:00.655Z,1513223280.655 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:48:00.657Z,1513223280.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:00.657Z,1513223280.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2017-12-14T03:48:00.657Z,1513223280.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:48:00.689Z,1513223280.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:48:00.689Z,1513223280.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:48:00.689Z,1513223280.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:48:01.043Z,1513223281.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:01.089Z,1513223281.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:48:01.089Z,1513223281.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2017-12-14T03:48:01.090Z,1513223281.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:48:01.090Z,1513223281.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2017-12-14T03:48:01.090Z,1513223281.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:48:01.090Z,1513223281.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2017-12-14T03:48:01.434Z,1513223281.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:01.451Z,1513223281.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:48:01.452Z,1513223281.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:48:01.452Z,1513223281.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:48:01.457Z,1513223281.457 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:48:01.457Z,1513223281.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:48:01.458Z,1513223281.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:48:01.458Z,1513223281.458 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:48:01.458Z,1513223281.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:48:01.459Z,1513223281.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:48:01.819Z,1513223281.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:01.857Z,1513223281.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:02.216Z,1513223282.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:02.247Z,1513223282.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:02.654Z,1513223282.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:02.678Z,1513223282.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:03.029Z,1513223283.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:03.043Z,1513223283.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:03.433Z,1513223283.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:03.448Z,1513223283.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:03.837Z,1513223283.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:03.852Z,1513223283.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:04.242Z,1513223284.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:04.256Z,1513223284.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:04.619Z,1513223284.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:04.638Z,1513223284.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:05.027Z,1513223285.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:05.047Z,1513223285.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:05.424Z,1513223285.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:05.447Z,1513223285.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:05.830Z,1513223285.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:05.845Z,1513223285.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:06.228Z,1513223286.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:06.244Z,1513223286.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:06.638Z,1513223286.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:06.665Z,1513223286.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:07.042Z,1513223287.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:07.057Z,1513223287.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:07.434Z,1513223287.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:07.463Z,1513223287.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:07.834Z,1513223287.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:07.849Z,1513223287.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:08.220Z,1513223288.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:08.255Z,1513223288.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:08.624Z,1513223288.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:08.653Z,1513223288.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:09.059Z,1513223289.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:09.097Z,1513223289.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:09.438Z,1513223289.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:09.479Z,1513223289.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:09.842Z,1513223289.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:09.860Z,1513223289.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:10.257Z,1513223290.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:10.309Z,1513223290.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:10.621Z,1513223290.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:10.636Z,1513223290.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:11.031Z,1513223291.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:11.142Z,1513223291.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:11.432Z,1513223291.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:11.452Z,1513223291.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:11.828Z,1513223291.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:11.885Z,1513223291.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:12.251Z,1513223292.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:12.288Z,1513223292.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:12.647Z,1513223292.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:12.662Z,1513223292.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:13.047Z,1513223293.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:13.137Z,1513223293.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:13.449Z,1513223293.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:13.464Z,1513223293.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:13.823Z,1513223293.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:13.846Z,1513223293.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:14.219Z,1513223294.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:14.239Z,1513223294.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:14.627Z,1513223294.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:14.642Z,1513223294.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:15.030Z,1513223295.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:15.044Z,1513223295.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:15.480Z,1513223295.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:15.521Z,1513223295.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:15.846Z,1513223295.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:15.871Z,1513223295.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:16.241Z,1513223296.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:16.267Z,1513223296.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:16.621Z,1513223296.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:16.636Z,1513223296.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:17.029Z,1513223297.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:17.043Z,1513223297.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:17.425Z,1513223297.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:17.451Z,1513223297.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:17.829Z,1513223297.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:17.844Z,1513223297.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:18.226Z,1513223298.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:18.241Z,1513223298.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:18.644Z,1513223298.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:18.679Z,1513223298.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:19.033Z,1513223299.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:19.063Z,1513223299.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:19.428Z,1513223299.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:19.463Z,1513223299.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:19.827Z,1513223299.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:19.858Z,1513223299.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:20.221Z,1513223300.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:20.273Z,1513223300.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:20.627Z,1513223300.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:20.643Z,1513223300.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:21.028Z,1513223301.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:21.047Z,1513223301.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:21.434Z,1513223301.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:21.448Z,1513223301.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:21.833Z,1513223301.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:21.848Z,1513223301.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:22.249Z,1513223302.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:22.274Z,1513223302.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:22.627Z,1513223302.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:22.647Z,1513223302.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:23.026Z,1513223303.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:23.041Z,1513223303.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:23.422Z,1513223303.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:23.455Z,1513223303.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:23.834Z,1513223303.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:23.848Z,1513223303.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:24.232Z,1513223304.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:24.247Z,1513223304.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:24.638Z,1513223304.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:24.659Z,1513223304.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:25.117Z,1513223305.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:25.198Z,1513223305.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:25.452Z,1513223305.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:25.475Z,1513223305.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:25.826Z,1513223305.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:25.841Z,1513223305.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:26.224Z,1513223306.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:26.238Z,1513223306.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:26.626Z,1513223306.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:26.641Z,1513223306.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:27.028Z,1513223307.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:27.043Z,1513223307.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:27.434Z,1513223307.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:27.450Z,1513223307.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:27.834Z,1513223307.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:27.849Z,1513223307.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:28.238Z,1513223308.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:28.253Z,1513223308.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:28.633Z,1513223308.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:28.789Z,1513223308.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:29.029Z,1513223309.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:29.048Z,1513223309.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:29.424Z,1513223309.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:29.456Z,1513223309.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:29.831Z,1513223309.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:29.855Z,1513223309.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:30.230Z,1513223310.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:30.246Z,1513223310.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:30.642Z,1513223310.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:30.706Z,1513223310.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:31.034Z,1513223311.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:31.098Z,1513223311.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:31.464Z,1513223311.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:31.493Z,1513223311.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:31.829Z,1513223311.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:31.851Z,1513223311.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:32.227Z,1513223312.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:32.285Z,1513223312.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:32.627Z,1513223312.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:32.642Z,1513223312.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:33.027Z,1513223313.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:33.083Z,1513223313.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:33.437Z,1513223313.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:33.452Z,1513223313.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:33.837Z,1513223313.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:33.852Z,1513223313.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:34.238Z,1513223314.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:34.259Z,1513223314.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:34.652Z,1513223314.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:34.679Z,1513223314.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:35.026Z,1513223315.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:35.047Z,1513223315.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:35.422Z,1513223315.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:35.452Z,1513223315.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:35.833Z,1513223315.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:35.848Z,1513223315.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:36.233Z,1513223316.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:36.247Z,1513223316.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:36.642Z,1513223316.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:36.656Z,1513223316.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:37.040Z,1513223317.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:37.056Z,1513223317.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:37.440Z,1513223317.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:37.455Z,1513223317.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:37.833Z,1513223317.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:37.847Z,1513223317.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:38.228Z,1513223318.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:38.243Z,1513223318.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:38.628Z,1513223318.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:38.647Z,1513223318.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:39.027Z,1513223319.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:39.042Z,1513223319.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:39.438Z,1513223319.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:39.469Z,1513223319.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:39.841Z,1513223319.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:39.856Z,1513223319.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:40.247Z,1513223320.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:40.261Z,1513223320.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:40.624Z,1513223320.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:40.650Z,1513223320.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:41.055Z,1513223321.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:41.191Z,1513223321.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:41.424Z,1513223321.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:41.463Z,1513223321.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:41.828Z,1513223321.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:41.862Z,1513223321.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:42.225Z,1513223322.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:42.240Z,1513223322.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:42.641Z,1513223322.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:42.671Z,1513223322.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:43.056Z,1513223323.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:43.078Z,1513223323.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:43.437Z,1513223323.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:43.468Z,1513223323.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:43.824Z,1513223323.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:43.839Z,1513223323.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:44.225Z,1513223324.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:44.240Z,1513223324.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:44.635Z,1513223324.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:44.650Z,1513223324.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:45.030Z,1513223325.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:45.044Z,1513223325.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:45.438Z,1513223325.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:45.461Z,1513223325.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:45.846Z,1513223325.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:45.860Z,1513223325.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:46.247Z,1513223326.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:46.303Z,1513223326.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:46.619Z,1513223326.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:46.646Z,1513223326.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:47.019Z,1513223327.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:47.045Z,1513223327.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:47.440Z,1513223327.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:47.490Z,1513223327.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:47.836Z,1513223327.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:47.851Z,1513223327.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:48.219Z,1513223328.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:48.255Z,1513223328.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:48.648Z,1513223328.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:48.662Z,1513223328.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:49.041Z,1513223329.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:49.057Z,1513223329.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:49.432Z,1513223329.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:49.447Z,1513223329.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:49.819Z,1513223329.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:49.892Z,1513223329.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:50.221Z,1513223330.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:50.250Z,1513223330.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:50.666Z,1513223330.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:50.701Z,1513223330.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:51.026Z,1513223331.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:51.041Z,1513223331.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:51.434Z,1513223331.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:51.486Z,1513223331.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:51.833Z,1513223331.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:51.848Z,1513223331.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:52.237Z,1513223332.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:52.259Z,1513223332.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:52.632Z,1513223332.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:52.647Z,1513223332.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:53.027Z,1513223333.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:53.050Z,1513223333.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:53.419Z,1513223333.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:53.467Z,1513223333.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:53.820Z,1513223333.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:53.845Z,1513223333.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:54.219Z,1513223334.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:54.271Z,1513223334.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:54.648Z,1513223334.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:54.662Z,1513223334.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:55.138Z,1513223335.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:55.175Z,1513223335.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:55.438Z,1513223335.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:55.461Z,1513223335.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:55.828Z,1513223335.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:55.842Z,1513223335.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:59.320Z,1513223339.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:59.336Z,1513223339.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:59.440Z,1513223339.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:59.475Z,1513223339.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:48:59.830Z,1513223339.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:48:59.845Z,1513223339.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:00.276Z,1513223340.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:00.299Z,1513223340.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:00.628Z,1513223340.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:00.644Z,1513223340.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:01.024Z,1513223341.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:01.047Z,1513223341.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:01.426Z,1513223341.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:01.473Z,1513223341.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:01.829Z,1513223341.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:01.851Z,1513223341.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:02.227Z,1513223342.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:02.242Z,1513223342.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:02.255Z,1513223342.255 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:49:02.631Z,1513223342.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:02.679Z,1513223342.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:03.038Z,1513223343.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:03.054Z,1513223343.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:03.460Z,1513223343.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:03.511Z,1513223343.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:03.815Z,1513223343.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:03.851Z,1513223343.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:04.219Z,1513223344.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:04.251Z,1513223344.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:04.617Z,1513223344.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:04.653Z,1513223344.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:05.015Z,1513223345.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:05.054Z,1513223345.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:05.429Z,1513223345.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:05.460Z,1513223345.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:05.842Z,1513223345.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:05.857Z,1513223345.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:06.234Z,1513223346.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:06.271Z,1513223346.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:06.639Z,1513223346.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:06.668Z,1513223346.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:07.015Z,1513223347.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:07.047Z,1513223347.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:07.415Z,1513223347.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:07.431Z,1513223347.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:07.824Z,1513223347.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:07.839Z,1513223347.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:08.219Z,1513223348.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:08.234Z,1513223348.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:08.638Z,1513223348.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:08.664Z,1513223348.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:09.037Z,1513223349.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:09.131Z,1513223349.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:09.430Z,1513223349.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:09.454Z,1513223349.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:09.824Z,1513223349.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:09.843Z,1513223349.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:10.215Z,1513223350.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:10.240Z,1513223350.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:10.615Z,1513223350.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:10.641Z,1513223350.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:11.037Z,1513223351.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:11.059Z,1513223351.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:11.438Z,1513223351.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:11.453Z,1513223351.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:11.837Z,1513223351.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:11.859Z,1513223351.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:12.237Z,1513223352.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:12.252Z,1513223352.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:12.615Z,1513223352.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:12.651Z,1513223352.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:13.035Z,1513223353.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:13.108Z,1513223353.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:13.420Z,1513223353.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:13.436Z,1513223353.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:13.826Z,1513223353.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:13.857Z,1513223353.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:14.227Z,1513223354.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:14.242Z,1513223354.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:14.633Z,1513223354.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:14.648Z,1513223354.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:15.037Z,1513223355.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:15.083Z,1513223355.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:15.429Z,1513223355.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:15.443Z,1513223355.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:15.827Z,1513223355.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:15.879Z,1513223355.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:16.220Z,1513223356.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:16.235Z,1513223356.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:16.624Z,1513223356.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:16.680Z,1513223356.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:17.025Z,1513223357.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:17.043Z,1513223357.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:17.432Z,1513223357.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:17.451Z,1513223357.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:17.836Z,1513223357.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:17.859Z,1513223357.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:18.234Z,1513223358.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:18.249Z,1513223358.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:18.619Z,1513223358.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:18.640Z,1513223358.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:19.023Z,1513223359.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:19.043Z,1513223359.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:19.429Z,1513223359.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:19.444Z,1513223359.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:19.830Z,1513223359.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:19.846Z,1513223359.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:20.223Z,1513223360.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:20.246Z,1513223360.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:20.637Z,1513223360.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:20.652Z,1513223360.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:21.036Z,1513223361.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:21.115Z,1513223361.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:21.429Z,1513223361.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:21.444Z,1513223361.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:21.819Z,1513223361.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:21.852Z,1513223361.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:22.213Z,1513223362.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:22.228Z,1513223362.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:22.615Z,1513223362.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:22.630Z,1513223362.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:23.015Z,1513223363.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:23.147Z,1513223363.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:23.435Z,1513223363.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:23.449Z,1513223363.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:23.850Z,1513223363.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:23.864Z,1513223363.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:24.240Z,1513223364.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:24.254Z,1513223364.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:24.614Z,1513223364.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:24.647Z,1513223364.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:25.015Z,1513223365.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:25.071Z,1513223365.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:25.420Z,1513223365.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:25.452Z,1513223365.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:25.816Z,1513223365.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:25.847Z,1513223365.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:26.215Z,1513223366.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:26.230Z,1513223366.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:26.630Z,1513223366.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:26.663Z,1513223366.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:27.030Z,1513223367.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:27.052Z,1513223367.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:27.435Z,1513223367.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:27.467Z,1513223367.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:27.823Z,1513223367.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:27.864Z,1513223367.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:28.211Z,1513223368.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:28.231Z,1513223368.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:28.621Z,1513223368.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:28.636Z,1513223368.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:29.022Z,1513223369.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:29.036Z,1513223369.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:29.467Z,1513223369.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:29.511Z,1513223369.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:29.838Z,1513223369.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:29.862Z,1513223369.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:30.237Z,1513223370.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:30.263Z,1513223370.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:30.617Z,1513223370.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:30.632Z,1513223370.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:31.031Z,1513223371.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:31.060Z,1513223371.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:31.421Z,1513223371.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:31.436Z,1513223371.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:31.821Z,1513223371.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:31.836Z,1513223371.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:32.223Z,1513223372.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:32.238Z,1513223372.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:32.640Z,1513223372.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:32.675Z,1513223372.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:33.052Z,1513223373.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:33.071Z,1513223373.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:33.434Z,1513223373.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:33.460Z,1513223373.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:33.826Z,1513223373.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:33.841Z,1513223373.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:34.221Z,1513223374.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:34.236Z,1513223374.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:34.620Z,1513223374.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:34.648Z,1513223374.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:35.028Z,1513223375.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:35.048Z,1513223375.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:35.430Z,1513223375.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:35.483Z,1513223375.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:35.841Z,1513223375.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:35.863Z,1513223375.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:36.252Z,1513223376.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:36.275Z,1513223376.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:36.620Z,1513223376.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:36.652Z,1513223376.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:37.018Z,1513223377.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:37.123Z,1513223377.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:37.419Z,1513223377.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:37.441Z,1513223377.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:37.829Z,1513223377.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:37.879Z,1513223377.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:38.225Z,1513223378.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:38.239Z,1513223378.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:38.634Z,1513223378.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:38.679Z,1513223378.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:39.048Z,1513223379.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:39.086Z,1513223379.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:39.434Z,1513223379.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:39.448Z,1513223379.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:39.822Z,1513223379.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:39.848Z,1513223379.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:40.216Z,1513223380.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:40.247Z,1513223380.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:40.620Z,1513223380.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:40.647Z,1513223380.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:41.015Z,1513223381.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:41.043Z,1513223381.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:41.432Z,1513223381.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:41.462Z,1513223381.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:41.844Z,1513223381.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:41.858Z,1513223381.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:42.240Z,1513223382.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:42.280Z,1513223382.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:42.615Z,1513223382.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:42.632Z,1513223382.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:43.025Z,1513223383.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:43.059Z,1513223383.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:43.416Z,1513223383.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:43.431Z,1513223383.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:43.824Z,1513223383.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:43.839Z,1513223383.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:44.223Z,1513223384.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:44.237Z,1513223384.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:44.638Z,1513223384.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:44.664Z,1513223384.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:45.033Z,1513223385.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:45.051Z,1513223385.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:45.438Z,1513223385.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:45.482Z,1513223385.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:45.826Z,1513223385.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:45.840Z,1513223385.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:46.225Z,1513223386.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:46.240Z,1513223386.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:46.623Z,1513223386.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:46.640Z,1513223386.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:47.023Z,1513223387.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:47.081Z,1513223387.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:47.432Z,1513223387.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:47.455Z,1513223387.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:47.837Z,1513223387.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:47.859Z,1513223387.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:48.238Z,1513223388.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:48.254Z,1513223388.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:48.644Z,1513223388.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:48.672Z,1513223388.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:49.015Z,1513223389.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:49.051Z,1513223389.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:49.427Z,1513223389.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:49.463Z,1513223389.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:49.824Z,1513223389.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:49.859Z,1513223389.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:50.221Z,1513223390.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:50.235Z,1513223390.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:50.633Z,1513223390.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:50.667Z,1513223390.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:51.038Z,1513223391.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:51.130Z,1513223391.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:51.429Z,1513223391.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:51.451Z,1513223391.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:51.911Z,1513223391.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:51.984Z,1513223391.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:52.223Z,1513223392.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:52.239Z,1513223392.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:52.627Z,1513223392.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:52.647Z,1513223392.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:53.024Z,1513223393.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:53.043Z,1513223393.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:53.426Z,1513223393.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:53.442Z,1513223393.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:53.837Z,1513223393.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:53.852Z,1513223393.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:54.230Z,1513223394.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:54.244Z,1513223394.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:54.628Z,1513223394.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:54.647Z,1513223394.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:55.023Z,1513223395.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:55.043Z,1513223395.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:55.423Z,1513223395.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:55.444Z,1513223395.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:55.827Z,1513223395.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:55.842Z,1513223395.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:56.225Z,1513223396.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:56.239Z,1513223396.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:59.782Z,1513223399.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:59.842Z,1513223399.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:49:59.950Z,1513223399.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:49:59.976Z,1513223399.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:00.318Z,1513223400.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:00.348Z,1513223400.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:00.700Z,1513223400.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:00.812Z,1513223400.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:01.107Z,1513223401.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:01.144Z,1513223401.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:01.546Z,1513223401.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:01.596Z,1513223401.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:01.900Z,1513223401.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:01.957Z,1513223401.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:02.301Z,1513223402.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:02.316Z,1513223402.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:02.717Z,1513223402.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:02.740Z,1513223402.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:03.167Z,1513223403.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:03.199Z,1513223403.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:03.514Z,1513223403.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:03.529Z,1513223403.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:03.910Z,1513223403.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:03.924Z,1513223403.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:04.312Z,1513223404.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:04.326Z,1513223404.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:04.711Z,1513223404.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:04.754Z,1513223404.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:05.162Z,1513223405.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:05.198Z,1513223405.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:05.514Z,1513223405.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:05.543Z,1513223405.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:05.926Z,1513223405.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:05.941Z,1513223405.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:06.315Z,1513223406.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:06.347Z,1513223406.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:06.699Z,1513223406.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:06.760Z,1513223406.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:07.110Z,1513223407.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:07.127Z,1513223407.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:07.515Z,1513223407.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:07.532Z,1513223407.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:07.911Z,1513223407.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:07.934Z,1513223407.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:08.301Z,1513223408.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:08.316Z,1513223408.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:08.734Z,1513223408.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:08.806Z,1513223408.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:09.121Z,1513223409.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:09.135Z,1513223409.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:09.519Z,1513223409.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:09.539Z,1513223409.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:09.912Z,1513223409.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:09.960Z,1513223409.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:10.315Z,1513223410.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:10.330Z,1513223410.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:10.708Z,1513223410.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:10.795Z,1513223410.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:11.099Z,1513223411.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:11.143Z,1513223411.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:11.513Z,1513223411.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:11.547Z,1513223411.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:11.915Z,1513223411.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:11.939Z,1513223411.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:12.318Z,1513223412.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:12.341Z,1513223412.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:12.708Z,1513223412.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:12.785Z,1513223412.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:13.099Z,1513223413.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:13.126Z,1513223413.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:13.518Z,1513223413.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:13.533Z,1513223413.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:13.912Z,1513223413.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:13.935Z,1513223413.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:14.307Z,1513223414.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:14.325Z,1513223414.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:14.716Z,1513223414.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:14.732Z,1513223414.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:15.120Z,1513223415.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:15.148Z,1513223415.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:15.514Z,1513223415.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:15.547Z,1513223415.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:15.906Z,1513223415.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:15.943Z,1513223415.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:16.304Z,1513223416.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:16.342Z,1513223416.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:16.704Z,1513223416.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:16.740Z,1513223416.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:17.175Z,1513223417.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:17.234Z,1513223417.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:17.523Z,1513223417.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:17.538Z,1513223417.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:17.925Z,1513223417.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:17.948Z,1513223417.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:18.325Z,1513223418.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:18.340Z,1513223418.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:18.715Z,1513223418.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:18.730Z,1513223418.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:19.152Z,1513223419.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:19.191Z,1513223419.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:19.503Z,1513223419.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:19.539Z,1513223419.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:19.900Z,1513223419.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:19.935Z,1513223419.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:20.303Z,1513223420.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:20.346Z,1513223420.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:20.710Z,1513223420.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:20.815Z,1513223420.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:21.126Z,1513223421.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:21.141Z,1513223421.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:21.518Z,1513223421.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:21.532Z,1513223421.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:21.899Z,1513223421.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:21.924Z,1513223421.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:22.303Z,1513223422.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:22.387Z,1513223422.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:22.700Z,1513223422.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:22.778Z,1513223422.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:23.111Z,1513223423.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:23.155Z,1513223423.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:23.547Z,1513223423.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:23.572Z,1513223423.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:23.914Z,1513223423.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:23.958Z,1513223423.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:24.310Z,1513223424.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:24.324Z,1513223424.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:24.710Z,1513223424.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:24.826Z,1513223424.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:25.100Z,1513223425.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:25.139Z,1513223425.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:25.503Z,1513223425.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:25.535Z,1513223425.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:25.908Z,1513223425.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:25.936Z,1513223425.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:26.300Z,1513223426.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:26.331Z,1513223426.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:26.805Z,1513223426.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:26.844Z,1513223426.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:27.124Z,1513223427.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:27.138Z,1513223427.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:27.523Z,1513223427.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:27.538Z,1513223427.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:27.903Z,1513223427.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:27.930Z,1513223427.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:28.304Z,1513223428.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:28.332Z,1513223428.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:28.700Z,1513223428.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:28.731Z,1513223428.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:29.099Z,1513223429.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:29.115Z,1513223429.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:29.530Z,1513223429.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:29.544Z,1513223429.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:29.919Z,1513223429.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:29.952Z,1513223429.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:30.310Z,1513223430.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:30.325Z,1513223430.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:30.694Z,1513223430.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:30.709Z,1513223430.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:31.126Z,1513223431.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:31.151Z,1513223431.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:31.510Z,1513223431.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:31.532Z,1513223431.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:31.903Z,1513223431.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:31.937Z,1513223431.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:32.306Z,1513223432.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:32.351Z,1513223432.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:32.722Z,1513223432.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:32.743Z,1513223432.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:33.162Z,1513223433.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:33.199Z,1513223433.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:33.518Z,1513223433.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:33.542Z,1513223433.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:33.947Z,1513223433.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:33.998Z,1513223433.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:34.308Z,1513223434.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:34.339Z,1513223434.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:34.710Z,1513223434.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:34.798Z,1513223434.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:35.111Z,1513223435.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:35.126Z,1513223435.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:35.514Z,1513223435.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:35.547Z,1513223435.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:35.925Z,1513223435.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:35.940Z,1513223435.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:36.322Z,1513223436.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:36.337Z,1513223436.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:36.698Z,1513223436.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:36.774Z,1513223436.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:37.170Z,1513223437.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:37.199Z,1513223437.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:37.499Z,1513223437.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:37.536Z,1513223437.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:37.893Z,1513223437.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:37.908Z,1513223437.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:38.299Z,1513223438.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:38.335Z,1513223438.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:38.713Z,1513223438.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:38.827Z,1513223438.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:39.114Z,1513223439.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:39.129Z,1513223439.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:39.515Z,1513223439.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:39.535Z,1513223439.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:39.911Z,1513223439.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:39.927Z,1513223439.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:40.339Z,1513223440.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:40.383Z,1513223440.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:40.709Z,1513223440.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:40.796Z,1513223440.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:41.103Z,1513223441.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:41.129Z,1513223441.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:41.523Z,1513223441.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:41.538Z,1513223441.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:41.920Z,1513223441.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:41.941Z,1513223441.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:42.323Z,1513223442.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:42.338Z,1513223442.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:42.699Z,1513223442.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:42.726Z,1513223442.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:43.099Z,1513223443.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:43.135Z,1513223443.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:43.503Z,1513223443.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:43.519Z,1513223443.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:43.916Z,1513223443.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:43.931Z,1513223443.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:44.309Z,1513223444.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:44.387Z,1513223444.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:44.716Z,1513223444.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:44.732Z,1513223444.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:45.166Z,1513223445.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:45.220Z,1513223445.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:45.518Z,1513223445.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:45.532Z,1513223445.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:45.934Z,1513223445.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:45.989Z,1513223445.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:46.312Z,1513223446.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:46.327Z,1513223446.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:46.740Z,1513223446.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:46.783Z,1513223446.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:47.157Z,1513223447.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:47.176Z,1513223447.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:47.521Z,1513223447.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:47.556Z,1513223447.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:47.922Z,1513223447.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:47.954Z,1513223447.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:48.310Z,1513223448.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:48.331Z,1513223448.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:48.701Z,1513223448.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:48.776Z,1513223448.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:49.099Z,1513223449.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:49.131Z,1513223449.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:49.499Z,1513223449.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:49.540Z,1513223449.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:49.932Z,1513223449.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:49.959Z,1513223449.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:50.304Z,1513223450.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:50.331Z,1513223450.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:50.712Z,1513223450.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:50.815Z,1513223450.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:51.110Z,1513223451.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:51.125Z,1513223451.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:51.515Z,1513223451.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:51.535Z,1513223451.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:51.910Z,1513223451.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:51.961Z,1513223451.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:52.302Z,1513223452.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:52.316Z,1513223452.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:52.707Z,1513223452.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:52.798Z,1513223452.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:53.145Z,1513223453.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:53.188Z,1513223453.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:53.522Z,1513223453.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:53.543Z,1513223453.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:53.917Z,1513223453.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:53.948Z,1513223453.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:54.322Z,1513223454.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:54.364Z,1513223454.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:54.703Z,1513223454.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:54.790Z,1513223454.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:55.105Z,1513223455.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:55.120Z,1513223455.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:55.124Z,1513223455.124 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T03:50:55.124Z,1513223455.124 [Default:CheckIn:C.Wait] Stopped
2017-12-14T03:50:55.124Z,1513223455.124 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T03:50:55.124Z,1513223455.124 [Default:CheckIn:D] Running Loop=1
2017-12-14T03:50:55.505Z,1513223455.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:55.519Z,1513223455.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:55.531Z,1513223455.531 [Default:CheckIn:D] Stopped
2017-12-14T03:50:55.531Z,1513223455.531 [Default:CheckIn:E] Running Loop=1
2017-12-14T03:50:55.909Z,1513223455.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:55.926Z,1513223455.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:55.929Z,1513223455.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 197.669027 min 
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn:E] Stopped
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn] Stopped
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn](INFO): Running loop #20
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn] Running Loop=20
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T03:50:55.930Z,1513223455.930 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T03:50:56.315Z,1513223456.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:56.339Z,1513223456.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:59.830Z,1513223459.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:50:59.847Z,1513223459.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:50:59.967Z,1513223459.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:00.005Z,1513223460.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:00.342Z,1513223460.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:00.375Z,1513223460.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:00.722Z,1513223460.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:00.736Z,1513223460.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:01.154Z,1513223461.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:01.189Z,1513223461.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:01.524Z,1513223461.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:01.540Z,1513223461.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:01.541Z,1513223461.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2017-12-14T03:51:01.541Z,1513223461.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:51:01.543Z,1513223461.543 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:01.543Z,1513223461.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2017-12-14T03:51:01.543Z,1513223461.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:51:01.561Z,1513223461.561 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:01.561Z,1513223461.561 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2017-12-14T03:51:01.561Z,1513223461.561 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:51:01.585Z,1513223461.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:51:01.585Z,1513223461.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:51:01.586Z,1513223461.586 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:51:01.929Z,1513223461.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:01.979Z,1513223461.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:51:01.979Z,1513223461.979 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2017-12-14T03:51:01.980Z,1513223461.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:51:01.980Z,1513223461.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2017-12-14T03:51:01.980Z,1513223461.980 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:51:01.980Z,1513223461.980 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2017-12-14T03:51:02.327Z,1513223462.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:02.350Z,1513223462.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:51:02.351Z,1513223462.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:51:02.351Z,1513223462.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:51:02.352Z,1513223462.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:51:02.352Z,1513223462.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:51:02.352Z,1513223462.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:51:02.353Z,1513223462.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:51:02.353Z,1513223462.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:51:02.354Z,1513223462.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:51:02.793Z,1513223462.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:02.828Z,1513223462.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:03.140Z,1513223463.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:03.179Z,1513223463.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:03.538Z,1513223463.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:03.554Z,1513223463.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:03.926Z,1513223463.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:03.948Z,1513223463.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:04.333Z,1513223464.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:04.352Z,1513223464.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:04.754Z,1513223464.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:04.804Z,1513223464.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:05.119Z,1513223465.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:05.136Z,1513223465.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:05.538Z,1513223465.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:05.567Z,1513223465.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:05.938Z,1513223465.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:05.966Z,1513223465.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:06.356Z,1513223466.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:06.450Z,1513223466.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:06.756Z,1513223466.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:06.825Z,1513223466.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:07.132Z,1513223467.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:07.190Z,1513223467.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:07.529Z,1513223467.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:07.544Z,1513223467.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:07.930Z,1513223467.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:07.971Z,1513223467.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:08.329Z,1513223468.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:08.352Z,1513223468.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:08.784Z,1513223468.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:08.812Z,1513223468.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:09.158Z,1513223469.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:09.190Z,1513223469.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:09.539Z,1513223469.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:09.555Z,1513223469.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:09.920Z,1513223469.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:09.992Z,1513223469.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:10.318Z,1513223470.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:10.347Z,1513223470.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:10.736Z,1513223470.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:10.751Z,1513223470.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:11.120Z,1513223471.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:11.157Z,1513223471.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:11.559Z,1513223471.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:11.574Z,1513223471.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:11.925Z,1513223471.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:11.956Z,1513223471.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:12.362Z,1513223472.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:12.409Z,1513223472.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:12.726Z,1513223472.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:12.740Z,1513223472.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:13.150Z,1513223473.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:13.189Z,1513223473.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:13.526Z,1513223473.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:13.555Z,1513223473.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:13.934Z,1513223473.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:13.948Z,1513223473.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:14.316Z,1513223474.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:14.325Z,1513223474.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:14.355Z,1513223474.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:14.734Z,1513223474.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:14.763Z,1513223474.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:15.122Z,1513223475.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:15.178Z,1513223475.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:15.200Z,1513223475.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:15.526Z,1513223475.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:15.544Z,1513223475.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:15.593Z,1513223475.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:15.961Z,1513223475.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:16.007Z,1513223476.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:16.326Z,1513223476.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:16.356Z,1513223476.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:16.761Z,1513223476.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:16.811Z,1513223476.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:17.128Z,1513223477.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:17.143Z,1513223477.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:17.534Z,1513223477.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:17.549Z,1513223477.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:17.942Z,1513223477.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:17.977Z,1513223477.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:18.330Z,1513223478.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:18.344Z,1513223478.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:18.807Z,1513223478.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:18.846Z,1513223478.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:19.126Z,1513223479.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:19.149Z,1513223479.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:19.529Z,1513223479.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:19.577Z,1513223479.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:19.936Z,1513223479.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:19.951Z,1513223479.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:20.318Z,1513223480.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:20.358Z,1513223480.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:20.804Z,1513223480.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:20.860Z,1513223480.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:21.154Z,1513223481.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:21.177Z,1513223481.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:21.542Z,1513223481.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:21.567Z,1513223481.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:21.952Z,1513223481.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:22.022Z,1513223482.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:22.336Z,1513223482.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:22.375Z,1513223482.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:22.756Z,1513223482.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:22.823Z,1513223482.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:23.123Z,1513223483.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:23.158Z,1513223483.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:23.557Z,1513223483.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:23.607Z,1513223483.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:23.936Z,1513223483.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:23.973Z,1513223483.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:24.360Z,1513223484.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:24.380Z,1513223484.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:24.734Z,1513223484.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:24.835Z,1513223484.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:25.128Z,1513223485.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:25.183Z,1513223485.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:25.548Z,1513223485.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:25.603Z,1513223485.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:25.934Z,1513223485.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:25.978Z,1513223485.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:26.334Z,1513223486.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:26.355Z,1513223486.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:26.738Z,1513223486.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:26.753Z,1513223486.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:27.195Z,1513223487.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:27.212Z,1513223487.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:27.538Z,1513223487.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:27.554Z,1513223487.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:27.948Z,1513223487.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:28.080Z,1513223488.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:28.320Z,1513223488.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:28.326Z,1513223488.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:28.386Z,1513223488.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:28.723Z,1513223488.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:28.786Z,1513223488.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:29.122Z,1513223489.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:29.176Z,1513223489.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:29.215Z,1513223489.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:29.525Z,1513223489.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:29.554Z,1513223489.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:29.610Z,1513223489.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:29.937Z,1513223489.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:29.967Z,1513223489.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:30.369Z,1513223490.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:30.384Z,1513223490.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:30.850Z,1513223490.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:30.934Z,1513223490.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:31.125Z,1513223491.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:31.182Z,1513223491.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:31.534Z,1513223491.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:31.577Z,1513223491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:31.953Z,1513223491.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:32.030Z,1513223492.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:32.326Z,1513223492.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:32.369Z,1513223492.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:32.819Z,1513223492.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:32.885Z,1513223492.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:33.140Z,1513223493.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:33.184Z,1513223493.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:33.542Z,1513223493.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:33.631Z,1513223493.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:33.930Z,1513223493.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:33.961Z,1513223493.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:34.321Z,1513223494.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:34.406Z,1513223494.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:34.760Z,1513223494.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:34.828Z,1513223494.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:35.138Z,1513223495.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:35.186Z,1513223495.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:35.546Z,1513223495.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:35.632Z,1513223495.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:35.944Z,1513223495.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:35.967Z,1513223495.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:36.390Z,1513223496.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:36.421Z,1513223496.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:36.790Z,1513223496.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:36.825Z,1513223496.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:37.138Z,1513223497.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:37.178Z,1513223497.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:37.531Z,1513223497.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:37.555Z,1513223497.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:37.936Z,1513223497.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:37.987Z,1513223497.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:38.332Z,1513223498.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:38.352Z,1513223498.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:38.748Z,1513223498.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:38.891Z,1513223498.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:39.135Z,1513223499.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:39.178Z,1513223499.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:39.536Z,1513223499.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:39.572Z,1513223499.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:39.946Z,1513223499.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:39.978Z,1513223499.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:40.327Z,1513223500.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:40.342Z,1513223500.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:40.723Z,1513223500.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:40.739Z,1513223500.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:41.142Z,1513223501.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:41.187Z,1513223501.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:41.538Z,1513223501.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:41.553Z,1513223501.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:41.938Z,1513223501.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:41.959Z,1513223501.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:42.330Z,1513223502.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:42.339Z,1513223502.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:42.355Z,1513223502.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:42.734Z,1513223502.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:42.749Z,1513223502.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:43.126Z,1513223503.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:43.159Z,1513223503.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:43.194Z,1513223503.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:43.526Z,1513223503.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:43.529Z,1513223503.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:43.559Z,1513223503.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:43.938Z,1513223503.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:43.953Z,1513223503.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:44.320Z,1513223504.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:44.351Z,1513223504.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:44.794Z,1513223504.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:44.836Z,1513223504.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:45.151Z,1513223505.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:45.177Z,1513223505.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:45.535Z,1513223505.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:45.550Z,1513223505.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:45.921Z,1513223505.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:45.936Z,1513223505.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:46.319Z,1513223506.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:46.335Z,1513223506.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:46.779Z,1513223506.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:46.816Z,1513223506.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:47.132Z,1513223507.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:47.148Z,1513223507.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:47.534Z,1513223507.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:47.550Z,1513223507.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:47.943Z,1513223507.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:47.977Z,1513223507.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:48.342Z,1513223508.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:48.379Z,1513223508.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:48.787Z,1513223508.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:48.830Z,1513223508.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:49.143Z,1513223509.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:49.173Z,1513223509.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:49.536Z,1513223509.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:49.568Z,1513223509.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:49.931Z,1513223509.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:50.020Z,1513223510.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:50.326Z,1513223510.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:50.344Z,1513223510.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:50.772Z,1513223510.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:50.834Z,1513223510.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:51.142Z,1513223511.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:51.175Z,1513223511.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:51.534Z,1513223511.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:51.587Z,1513223511.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:51.921Z,1513223511.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:51.935Z,1513223511.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:52.328Z,1513223512.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:52.344Z,1513223512.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:52.724Z,1513223512.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:52.740Z,1513223512.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:53.136Z,1513223513.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:53.164Z,1513223513.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:53.538Z,1513223513.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:53.553Z,1513223513.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:53.934Z,1513223513.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:53.959Z,1513223513.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:54.341Z,1513223514.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:54.356Z,1513223514.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:54.729Z,1513223514.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:54.743Z,1513223514.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:55.162Z,1513223515.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:55.205Z,1513223515.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:55.519Z,1513223515.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:55.544Z,1513223515.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:55.897Z,1513223515.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:55.939Z,1513223515.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:55.954Z,1513223515.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:56.320Z,1513223516.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:56.358Z,1513223516.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:51:56.693Z,1513223516.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:59.818Z,1513223519.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:51:59.917Z,1513223519.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:00.018Z,1513223520.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:00.051Z,1513223520.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:00.403Z,1513223520.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:00.423Z,1513223520.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:00.804Z,1513223520.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:00.851Z,1513223520.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:01.198Z,1513223521.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:01.212Z,1513223521.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:01.598Z,1513223521.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:01.621Z,1513223521.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:01.987Z,1513223521.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:02.022Z,1513223522.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:02.406Z,1513223522.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:02.421Z,1513223522.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:02.813Z,1513223522.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:02.827Z,1513223522.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:03.212Z,1513223523.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:03.231Z,1513223523.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:03.589Z,1513223523.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:03.616Z,1513223523.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:03.987Z,1513223523.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:04.019Z,1513223524.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:04.411Z,1513223524.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:04.426Z,1513223524.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:04.837Z,1513223524.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:04.874Z,1513223524.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:05.207Z,1513223525.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:05.279Z,1513223525.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:05.592Z,1513223525.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:05.619Z,1513223525.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:05.992Z,1513223525.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:06.019Z,1513223526.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:06.406Z,1513223526.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:06.426Z,1513223526.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:06.837Z,1513223526.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:06.868Z,1513223526.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:07.225Z,1513223527.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:07.241Z,1513223527.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:07.587Z,1513223527.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:07.622Z,1513223527.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:07.989Z,1513223527.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:08.037Z,1513223528.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:08.387Z,1513223528.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:08.410Z,1513223528.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:08.789Z,1513223528.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:08.803Z,1513223528.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:09.191Z,1513223529.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:09.205Z,1513223529.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:09.602Z,1513223529.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:09.616Z,1513223529.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:10.005Z,1513223530.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:10.027Z,1513223530.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:10.402Z,1513223530.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:10.423Z,1513223530.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:10.788Z,1513223530.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:10.802Z,1513223530.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:11.198Z,1513223531.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:11.227Z,1513223531.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:11.595Z,1513223531.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:11.635Z,1513223531.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:11.988Z,1513223531.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:12.031Z,1513223532.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:12.401Z,1513223532.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:12.416Z,1513223532.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:12.809Z,1513223532.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:12.824Z,1513223532.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:13.203Z,1513223533.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:13.251Z,1513223533.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:13.683Z,1513223533.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:13.714Z,1513223533.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:13.988Z,1513223533.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:14.062Z,1513223534.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:14.418Z,1513223534.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:14.454Z,1513223534.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:14.811Z,1513223534.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:14.843Z,1513223534.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:15.203Z,1513223535.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:15.230Z,1513223535.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:15.589Z,1513223535.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:15.619Z,1513223535.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:16.013Z,1513223536.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:16.039Z,1513223536.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:16.420Z,1513223536.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:16.443Z,1513223536.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:16.830Z,1513223536.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:16.849Z,1513223536.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:17.206Z,1513223537.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:17.227Z,1513223537.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:17.596Z,1513223537.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:17.634Z,1513223537.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:18.004Z,1513223538.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:18.030Z,1513223538.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:18.407Z,1513223538.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:18.429Z,1513223538.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:18.827Z,1513223538.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:18.846Z,1513223538.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:19.206Z,1513223539.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:19.231Z,1513223539.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:19.594Z,1513223539.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:19.621Z,1513223539.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:19.994Z,1513223539.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:20.035Z,1513223540.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:20.402Z,1513223540.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:20.434Z,1513223540.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:20.888Z,1513223540.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:20.938Z,1513223540.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:21.210Z,1513223541.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:21.345Z,1513223541.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:21.595Z,1513223541.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:21.609Z,1513223541.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:21.999Z,1513223541.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:22.013Z,1513223542.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:22.399Z,1513223542.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:22.447Z,1513223542.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:22.794Z,1513223542.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:22.810Z,1513223542.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:23.206Z,1513223543.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:23.220Z,1513223543.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:23.599Z,1513223543.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:23.619Z,1513223543.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:23.997Z,1513223543.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:24.019Z,1513223544.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:24.417Z,1513223544.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:24.450Z,1513223544.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:24.808Z,1513223544.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:24.831Z,1513223544.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:25.211Z,1513223545.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:25.226Z,1513223545.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:25.588Z,1513223545.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:25.619Z,1513223545.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:26.001Z,1513223546.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:26.016Z,1513223546.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:26.412Z,1513223546.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:26.427Z,1513223546.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:26.829Z,1513223546.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:26.956Z,1513223546.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:27.225Z,1513223547.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:27.270Z,1513223547.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:27.587Z,1513223547.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:27.613Z,1513223547.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:27.987Z,1513223547.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:28.012Z,1513223548.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:28.392Z,1513223548.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:28.420Z,1513223548.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:28.819Z,1513223548.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:28.837Z,1513223548.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:29.187Z,1513223549.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:29.222Z,1513223549.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:29.618Z,1513223549.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:29.633Z,1513223549.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:30.010Z,1513223550.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:30.026Z,1513223550.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:30.412Z,1513223550.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:30.452Z,1513223550.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:30.810Z,1513223550.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:30.848Z,1513223550.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:31.195Z,1513223551.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:31.215Z,1513223551.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:31.601Z,1513223551.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:31.661Z,1513223551.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:31.996Z,1513223551.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:32.012Z,1513223552.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:32.398Z,1513223552.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:32.413Z,1513223552.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:32.822Z,1513223552.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:32.846Z,1513223552.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:33.202Z,1513223553.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:33.217Z,1513223553.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:33.615Z,1513223553.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:33.647Z,1513223553.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:33.988Z,1513223553.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:34.047Z,1513223554.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:34.419Z,1513223554.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:34.490Z,1513223554.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:34.864Z,1513223554.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:34.911Z,1513223554.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:35.202Z,1513223555.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:35.228Z,1513223555.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:35.588Z,1513223555.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:35.625Z,1513223555.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:35.988Z,1513223555.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:36.055Z,1513223556.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:36.406Z,1513223556.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:36.425Z,1513223556.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:36.826Z,1513223556.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:36.879Z,1513223556.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:37.198Z,1513223557.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:37.232Z,1513223557.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:37.594Z,1513223557.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:37.635Z,1513223557.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:37.989Z,1513223557.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:38.003Z,1513223558.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:38.405Z,1513223558.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:38.432Z,1513223558.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:38.805Z,1513223558.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:38.836Z,1513223558.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:39.201Z,1513223559.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:39.234Z,1513223559.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:39.594Z,1513223559.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:39.609Z,1513223559.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:39.993Z,1513223559.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:40.007Z,1513223560.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:40.402Z,1513223560.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:40.417Z,1513223560.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:40.817Z,1513223560.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:40.844Z,1513223560.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:41.213Z,1513223561.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:41.244Z,1513223561.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:41.596Z,1513223561.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:41.611Z,1513223561.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:41.987Z,1513223561.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:42.010Z,1513223562.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:42.404Z,1513223562.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:42.419Z,1513223562.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:42.822Z,1513223562.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:42.836Z,1513223562.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:43.236Z,1513223563.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:43.280Z,1513223563.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:43.610Z,1513223563.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:43.624Z,1513223563.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:43.987Z,1513223563.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:44.022Z,1513223564.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:44.391Z,1513223564.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:44.418Z,1513223564.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:44.804Z,1513223564.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:44.862Z,1513223564.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:45.191Z,1513223565.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:45.255Z,1513223565.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:45.611Z,1513223565.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:45.627Z,1513223565.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:46.010Z,1513223566.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:46.027Z,1513223566.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:46.420Z,1513223566.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:46.486Z,1513223566.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:46.813Z,1513223566.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:46.840Z,1513223566.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:47.191Z,1513223567.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:47.216Z,1513223567.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:47.587Z,1513223567.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:47.619Z,1513223567.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:47.987Z,1513223567.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:48.023Z,1513223568.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:48.411Z,1513223568.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:48.426Z,1513223568.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:48.856Z,1513223568.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:48.899Z,1513223568.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:49.209Z,1513223569.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:49.233Z,1513223569.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:49.612Z,1513223569.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:49.656Z,1513223569.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:49.998Z,1513223569.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:50.012Z,1513223570.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:50.403Z,1513223570.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:50.423Z,1513223570.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:50.804Z,1513223570.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:50.818Z,1513223570.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:51.207Z,1513223571.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:51.222Z,1513223571.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:51.597Z,1513223571.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:51.612Z,1513223571.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:51.997Z,1513223571.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:52.011Z,1513223572.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:52.408Z,1513223572.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:52.422Z,1513223572.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:52.844Z,1513223572.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:52.868Z,1513223572.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:53.208Z,1513223573.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:53.227Z,1513223573.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:53.602Z,1513223573.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:53.618Z,1513223573.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:53.999Z,1513223573.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:54.023Z,1513223574.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:54.408Z,1513223574.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:54.422Z,1513223574.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:54.813Z,1513223574.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:54.858Z,1513223574.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:55.210Z,1513223575.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:55.226Z,1513223575.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:55.590Z,1513223575.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:55.621Z,1513223575.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:56.024Z,1513223576.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:56.070Z,1513223576.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:56.410Z,1513223576.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:56.424Z,1513223576.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:52:59.875Z,1513223579.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:52:59.955Z,1513223579.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:00.063Z,1513223580.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:00.109Z,1513223580.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:00.431Z,1513223580.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:00.468Z,1513223580.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:00.830Z,1513223580.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:00.886Z,1513223580.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:01.236Z,1513223581.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:01.251Z,1513223581.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:01.635Z,1513223581.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:01.695Z,1513223581.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:02.037Z,1513223582.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:02.052Z,1513223582.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:02.434Z,1513223582.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:02.448Z,1513223582.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:02.874Z,1513223582.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:02.929Z,1513223582.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:03.235Z,1513223583.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:03.266Z,1513223583.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:03.630Z,1513223583.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:03.645Z,1513223583.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:04.026Z,1513223584.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:04.042Z,1513223584.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:04.433Z,1513223584.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:04.448Z,1513223584.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:04.834Z,1513223584.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:04.849Z,1513223584.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:05.234Z,1513223585.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:05.248Z,1513223585.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:05.630Z,1513223585.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:05.645Z,1513223585.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:06.031Z,1513223586.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:06.071Z,1513223586.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:06.436Z,1513223586.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:06.452Z,1513223586.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:06.832Z,1513223586.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:06.847Z,1513223586.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:07.242Z,1513223587.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:07.256Z,1513223587.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:07.640Z,1513223587.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:07.655Z,1513223587.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:08.043Z,1513223588.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:08.057Z,1513223588.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:08.441Z,1513223588.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:08.457Z,1513223588.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:08.829Z,1513223588.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:08.848Z,1513223588.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:09.241Z,1513223589.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:09.272Z,1513223589.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:09.626Z,1513223589.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:09.659Z,1513223589.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:10.024Z,1513223590.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:10.090Z,1513223590.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:10.445Z,1513223590.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:10.462Z,1513223590.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:10.852Z,1513223590.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:10.868Z,1513223590.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:11.234Z,1513223591.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:11.257Z,1513223591.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:11.619Z,1513223591.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:11.652Z,1513223591.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:12.023Z,1513223592.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:12.050Z,1513223592.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:12.442Z,1513223592.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:12.477Z,1513223592.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:12.825Z,1513223592.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:12.863Z,1513223592.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:13.223Z,1513223593.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:13.238Z,1513223593.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:13.637Z,1513223593.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:13.674Z,1513223593.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:14.041Z,1513223594.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:14.065Z,1513223594.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:14.438Z,1513223594.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:14.467Z,1513223594.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:14.820Z,1513223594.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:14.835Z,1513223594.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:15.232Z,1513223595.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:15.248Z,1513223595.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:15.665Z,1513223595.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:15.699Z,1513223595.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:16.029Z,1513223596.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:16.047Z,1513223596.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:16.442Z,1513223596.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:16.482Z,1513223596.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:16.881Z,1513223596.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:16.917Z,1513223596.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:17.236Z,1513223597.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:17.278Z,1513223597.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:17.626Z,1513223597.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:17.647Z,1513223597.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:18.032Z,1513223598.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:18.047Z,1513223598.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:18.435Z,1513223598.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:18.451Z,1513223598.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:18.854Z,1513223598.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:18.907Z,1513223598.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:19.225Z,1513223599.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:19.252Z,1513223599.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:19.642Z,1513223599.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:19.663Z,1513223599.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:20.046Z,1513223600.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:20.068Z,1513223600.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:20.442Z,1513223600.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:20.463Z,1513223600.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:20.823Z,1513223600.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:20.850Z,1513223600.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:21.219Z,1513223601.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:21.247Z,1513223601.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:21.621Z,1513223601.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:21.647Z,1513223601.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:22.042Z,1513223602.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:22.115Z,1513223602.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:22.433Z,1513223602.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:22.497Z,1513223602.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:22.837Z,1513223602.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:22.867Z,1513223602.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:23.233Z,1513223603.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:23.248Z,1513223603.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:23.625Z,1513223603.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:23.679Z,1513223603.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:24.026Z,1513223604.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:24.047Z,1513223604.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:24.427Z,1513223604.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:24.483Z,1513223604.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:24.829Z,1513223604.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:24.845Z,1513223604.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:25.228Z,1513223605.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:25.301Z,1513223605.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:25.634Z,1513223605.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:25.655Z,1513223605.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:26.037Z,1513223606.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:26.051Z,1513223606.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:26.438Z,1513223606.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:26.453Z,1513223606.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:26.820Z,1513223606.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:26.859Z,1513223606.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:27.219Z,1513223607.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:27.259Z,1513223607.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:27.628Z,1513223607.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:27.664Z,1513223607.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:28.026Z,1513223608.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:28.053Z,1513223608.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:28.477Z,1513223608.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:28.525Z,1513223608.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:28.833Z,1513223608.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:28.867Z,1513223608.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:29.239Z,1513223609.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:29.265Z,1513223609.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:29.627Z,1513223609.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:29.674Z,1513223609.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:30.016Z,1513223610.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:30.035Z,1513223610.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:30.426Z,1513223610.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:30.440Z,1513223610.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:30.861Z,1513223610.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:30.911Z,1513223610.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:31.224Z,1513223611.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:31.251Z,1513223611.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:31.653Z,1513223611.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:31.682Z,1513223611.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:32.037Z,1513223612.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:32.059Z,1513223612.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:32.438Z,1513223612.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:32.459Z,1513223612.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:32.838Z,1513223612.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:32.891Z,1513223612.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:33.238Z,1513223613.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:33.253Z,1513223613.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:33.628Z,1513223613.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:33.645Z,1513223613.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:34.038Z,1513223614.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:34.060Z,1513223614.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:34.444Z,1513223614.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:34.459Z,1513223614.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:34.860Z,1513223614.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:34.903Z,1513223614.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:35.243Z,1513223615.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:35.263Z,1513223615.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:35.624Z,1513223615.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:35.650Z,1513223615.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:36.016Z,1513223616.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:36.052Z,1513223616.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:36.423Z,1513223616.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:36.448Z,1513223616.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:36.821Z,1513223616.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:36.855Z,1513223616.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:37.223Z,1513223617.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:37.257Z,1513223617.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:37.647Z,1513223617.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:37.672Z,1513223617.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:38.080Z,1513223618.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:38.123Z,1513223618.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:38.440Z,1513223618.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:38.463Z,1513223618.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:38.823Z,1513223618.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:38.848Z,1513223618.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:39.219Z,1513223619.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:39.242Z,1513223619.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:39.620Z,1513223619.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:39.655Z,1513223619.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:40.027Z,1513223620.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:40.054Z,1513223620.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:40.438Z,1513223620.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:40.474Z,1513223620.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:40.845Z,1513223620.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:40.866Z,1513223620.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:41.257Z,1513223621.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:41.284Z,1513223621.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:41.626Z,1513223621.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:41.659Z,1513223621.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:42.022Z,1513223622.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:42.037Z,1513223622.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:42.423Z,1513223622.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:42.439Z,1513223622.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:42.827Z,1513223622.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:42.842Z,1513223622.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:43.223Z,1513223623.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:43.246Z,1513223623.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:43.722Z,1513223623.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:43.738Z,1513223623.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:44.033Z,1513223624.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:44.073Z,1513223624.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:44.452Z,1513223624.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:44.484Z,1513223624.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:44.874Z,1513223624.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:44.955Z,1513223624.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:45.223Z,1513223625.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:45.263Z,1513223625.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:45.632Z,1513223625.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:45.691Z,1513223625.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:46.026Z,1513223626.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:46.045Z,1513223626.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:46.439Z,1513223626.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:46.483Z,1513223626.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:46.838Z,1513223626.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:46.853Z,1513223626.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:47.243Z,1513223627.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:47.260Z,1513223627.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:47.666Z,1513223627.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:47.683Z,1513223627.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:48.028Z,1513223628.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:48.043Z,1513223628.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:48.423Z,1513223628.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:48.445Z,1513223628.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:48.830Z,1513223628.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:48.844Z,1513223628.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:49.222Z,1513223629.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:49.248Z,1513223629.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:49.636Z,1513223629.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:49.657Z,1513223629.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:50.042Z,1513223630.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:50.063Z,1513223630.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:50.436Z,1513223630.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:50.455Z,1513223630.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:50.821Z,1513223630.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:50.906Z,1513223630.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:51.221Z,1513223631.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:51.236Z,1513223631.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:51.622Z,1513223631.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:51.636Z,1513223631.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:52.028Z,1513223632.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:52.043Z,1513223632.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:52.438Z,1513223632.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:52.472Z,1513223632.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:52.834Z,1513223632.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:52.864Z,1513223632.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:53.230Z,1513223633.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:53.263Z,1513223633.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:53.624Z,1513223633.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:53.639Z,1513223633.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:54.039Z,1513223634.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:54.070Z,1513223634.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:54.429Z,1513223634.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:54.446Z,1513223634.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:54.829Z,1513223634.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:54.883Z,1513223634.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:55.228Z,1513223635.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:55.243Z,1513223635.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:55.633Z,1513223635.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:55.648Z,1513223635.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:56.037Z,1513223636.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:56.052Z,1513223636.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:56.436Z,1513223636.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:56.455Z,1513223636.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:59.860Z,1513223639.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:53:59.889Z,1513223639.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:53:59.992Z,1513223639.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:00.034Z,1513223640.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:00.354Z,1513223640.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:00.378Z,1513223640.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:00.763Z,1513223640.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:00.783Z,1513223640.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:01.186Z,1513223641.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:01.215Z,1513223641.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:01.533Z,1513223641.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:01.571Z,1513223641.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:01.940Z,1513223641.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:01.976Z,1513223641.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:02.343Z,1513223642.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:02.375Z,1513223642.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:02.375Z,1513223642.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2017-12-14T03:54:02.375Z,1513223642.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:54:02.378Z,1513223642.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:02.379Z,1513223642.379 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2017-12-14T03:54:02.379Z,1513223642.379 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:54:02.381Z,1513223642.381 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:02.381Z,1513223642.381 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2017-12-14T03:54:02.381Z,1513223642.381 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:54:02.393Z,1513223642.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:54:02.394Z,1513223642.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:54:02.394Z,1513223642.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:54:02.754Z,1513223642.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:02.787Z,1513223642.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:54:02.787Z,1513223642.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2017-12-14T03:54:02.787Z,1513223642.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:54:02.787Z,1513223642.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2017-12-14T03:54:02.788Z,1513223642.788 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:54:02.788Z,1513223642.788 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2017-12-14T03:54:03.171Z,1513223643.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:03.197Z,1513223643.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:54:03.198Z,1513223643.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:54:03.198Z,1513223643.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:54:03.198Z,1513223643.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:54:03.199Z,1513223643.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:54:03.199Z,1513223643.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:54:03.199Z,1513223643.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:54:03.200Z,1513223643.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:54:03.200Z,1513223643.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:54:03.568Z,1513223643.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:03.603Z,1513223643.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:03.938Z,1513223643.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:03.975Z,1513223643.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:04.339Z,1513223644.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:04.375Z,1513223644.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:04.806Z,1513223644.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:04.846Z,1513223644.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:05.139Z,1513223645.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:05.174Z,1513223645.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:05.550Z,1513223645.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:05.587Z,1513223645.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:05.951Z,1513223645.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:05.987Z,1513223645.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:06.354Z,1513223646.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:06.380Z,1513223646.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:06.829Z,1513223646.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:06.880Z,1513223646.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:07.162Z,1513223647.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:07.219Z,1513223647.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:07.543Z,1513223647.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:07.573Z,1513223647.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:07.950Z,1513223647.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:07.983Z,1513223647.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:08.338Z,1513223648.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:08.391Z,1513223648.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:08.803Z,1513223648.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:08.850Z,1513223648.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:09.150Z,1513223649.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:09.207Z,1513223649.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:09.554Z,1513223649.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:09.573Z,1513223649.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:09.941Z,1513223649.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:10.007Z,1513223650.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:10.335Z,1513223650.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:10.368Z,1513223650.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:10.807Z,1513223650.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:10.839Z,1513223650.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:11.152Z,1513223651.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:11.175Z,1513223651.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:11.558Z,1513223651.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:11.589Z,1513223651.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:11.947Z,1513223651.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:11.962Z,1513223651.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:12.353Z,1513223652.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:12.388Z,1513223652.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:12.742Z,1513223652.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:12.758Z,1513223652.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:13.138Z,1513223653.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:13.195Z,1513223653.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:13.546Z,1513223653.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:13.564Z,1513223653.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:13.947Z,1513223653.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:13.966Z,1513223653.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:14.346Z,1513223654.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:14.361Z,1513223654.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:14.754Z,1513223654.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:14.769Z,1513223654.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:15.188Z,1513223655.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:15.219Z,1513223655.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:15.553Z,1513223655.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:15.575Z,1513223655.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:15.935Z,1513223655.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:15.962Z,1513223655.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:16.368Z,1513223656.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:16.403Z,1513223656.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:16.740Z,1513223656.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:16.775Z,1513223656.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:17.170Z,1513223657.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:17.204Z,1513223657.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:17.558Z,1513223657.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:17.618Z,1513223657.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:17.968Z,1513223657.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:17.991Z,1513223657.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:18.361Z,1513223658.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:18.376Z,1513223658.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:18.799Z,1513223658.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:18.822Z,1513223658.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:19.151Z,1513223659.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:19.183Z,1513223659.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:19.566Z,1513223659.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:19.595Z,1513223659.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:19.946Z,1513223659.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:19.987Z,1513223659.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:20.347Z,1513223660.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:20.367Z,1513223660.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:20.842Z,1513223660.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:20.890Z,1513223660.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:21.150Z,1513223661.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:21.179Z,1513223661.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:21.554Z,1513223661.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:21.576Z,1513223661.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:21.949Z,1513223661.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:21.964Z,1513223661.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:22.338Z,1513223662.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:22.365Z,1513223662.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:22.827Z,1513223662.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:22.862Z,1513223662.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:23.168Z,1513223663.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:23.184Z,1513223663.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:23.560Z,1513223663.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:23.579Z,1513223663.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:23.965Z,1513223663.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:23.980Z,1513223663.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:24.358Z,1513223664.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:24.380Z,1513223664.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:24.805Z,1513223664.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:24.844Z,1513223664.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:25.142Z,1513223665.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:25.174Z,1513223665.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:25.544Z,1513223665.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:25.560Z,1513223665.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:25.991Z,1513223665.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:26.044Z,1513223666.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:26.366Z,1513223666.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:26.399Z,1513223666.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:26.763Z,1513223666.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:26.857Z,1513223666.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:27.159Z,1513223667.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:27.186Z,1513223667.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:27.549Z,1513223667.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:27.564Z,1513223667.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:27.953Z,1513223667.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:27.968Z,1513223667.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:28.336Z,1513223668.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:28.365Z,1513223668.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:28.759Z,1513223668.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:28.779Z,1513223668.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:29.173Z,1513223669.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:29.234Z,1513223669.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:29.574Z,1513223669.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:29.643Z,1513223669.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:29.947Z,1513223669.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:29.987Z,1513223669.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:30.346Z,1513223670.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:30.360Z,1513223670.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:30.746Z,1513223670.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:30.760Z,1513223670.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:31.173Z,1513223671.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:31.211Z,1513223671.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:31.559Z,1513223671.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:31.588Z,1513223671.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:31.962Z,1513223671.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:32.011Z,1513223672.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:32.351Z,1513223672.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:32.411Z,1513223672.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:32.814Z,1513223672.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:32.851Z,1513223672.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:33.132Z,1513223673.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:33.179Z,1513223673.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:33.547Z,1513223673.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:33.561Z,1513223673.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:33.943Z,1513223673.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:33.967Z,1513223673.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:34.341Z,1513223674.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:34.362Z,1513223674.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:34.816Z,1513223674.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:34.837Z,1513223674.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:35.157Z,1513223675.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:35.184Z,1513223675.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:35.580Z,1513223675.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:35.639Z,1513223675.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:35.940Z,1513223675.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:35.966Z,1513223675.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:36.342Z,1513223676.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:36.357Z,1513223676.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:36.806Z,1513223676.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:36.839Z,1513223676.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:37.143Z,1513223677.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:37.179Z,1513223677.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:37.554Z,1513223677.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:37.589Z,1513223677.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:37.947Z,1513223677.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:37.962Z,1513223677.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:38.351Z,1513223678.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:38.366Z,1513223678.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:38.824Z,1513223678.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:38.871Z,1513223678.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:39.135Z,1513223679.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:39.170Z,1513223679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:39.536Z,1513223679.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:39.569Z,1513223679.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:39.938Z,1513223679.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:39.966Z,1513223679.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:40.335Z,1513223680.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:40.388Z,1513223680.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:40.761Z,1513223680.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:40.857Z,1513223680.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:41.167Z,1513223681.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:41.188Z,1513223681.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:41.574Z,1513223681.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:41.589Z,1513223681.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:41.940Z,1513223681.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:41.971Z,1513223681.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:42.343Z,1513223682.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:42.358Z,1513223682.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:42.740Z,1513223682.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:42.756Z,1513223682.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:43.174Z,1513223683.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:43.198Z,1513223683.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:43.555Z,1513223683.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:43.590Z,1513223683.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:43.991Z,1513223683.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:44.043Z,1513223684.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:44.363Z,1513223684.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:44.385Z,1513223684.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:44.741Z,1513223684.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:44.756Z,1513223684.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:45.189Z,1513223685.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:45.240Z,1513223685.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:45.536Z,1513223685.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:45.567Z,1513223685.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:45.935Z,1513223685.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:45.951Z,1513223685.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:46.333Z,1513223686.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:46.348Z,1513223686.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:46.807Z,1513223686.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:46.843Z,1513223686.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:47.159Z,1513223687.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:47.190Z,1513223687.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:47.563Z,1513223687.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:47.580Z,1513223687.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:47.933Z,1513223687.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:47.949Z,1513223687.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:48.348Z,1513223688.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:48.424Z,1513223688.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:48.810Z,1513223688.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:48.860Z,1513223688.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:49.140Z,1513223689.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:49.174Z,1513223689.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:49.560Z,1513223689.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:49.575Z,1513223689.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:49.958Z,1513223689.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:49.976Z,1513223689.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:50.363Z,1513223690.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:50.378Z,1513223690.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:50.807Z,1513223690.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:50.838Z,1513223690.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:51.143Z,1513223691.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:51.175Z,1513223691.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:51.545Z,1513223691.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:51.575Z,1513223691.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:51.964Z,1513223691.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:52.031Z,1513223692.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:52.353Z,1513223692.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:52.417Z,1513223692.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:52.810Z,1513223692.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:52.849Z,1513223692.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:53.159Z,1513223693.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:53.206Z,1513223693.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:53.550Z,1513223693.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:53.571Z,1513223693.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:54.006Z,1513223694.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:54.059Z,1513223694.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:54.349Z,1513223694.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:54.364Z,1513223694.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:54.830Z,1513223694.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:54.866Z,1513223694.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:55.151Z,1513223695.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:55.183Z,1513223695.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:55.558Z,1513223695.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:55.573Z,1513223695.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:55.946Z,1513223695.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:55.961Z,1513223695.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:56.350Z,1513223696.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:56.365Z,1513223696.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:54:56.749Z,1513223696.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:54:56.764Z,1513223696.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:00.195Z,1513223700.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:00.210Z,1513223700.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:00.324Z,1513223700.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:00.352Z,1513223700.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:00.677Z,1513223700.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:00.701Z,1513223700.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:01.085Z,1513223701.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:01.112Z,1513223701.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:01.468Z,1513223701.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:01.493Z,1513223701.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:01.867Z,1513223701.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:01.887Z,1513223701.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:02.265Z,1513223702.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:02.314Z,1513223702.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:02.678Z,1513223702.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:02.693Z,1513223702.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:03.083Z,1513223703.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:03.103Z,1513223703.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:03.484Z,1513223703.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:03.498Z,1513223703.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:03.859Z,1513223703.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:03.896Z,1513223703.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:04.259Z,1513223704.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:04.294Z,1513223704.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:04.708Z,1513223704.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:04.811Z,1513223704.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:05.067Z,1513223705.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:05.082Z,1513223705.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:05.469Z,1513223705.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:05.485Z,1513223705.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:05.881Z,1513223705.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:05.896Z,1513223705.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:06.274Z,1513223706.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:06.288Z,1513223706.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:06.668Z,1513223706.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:06.683Z,1513223706.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:07.069Z,1513223707.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:07.083Z,1513223707.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:07.472Z,1513223707.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:07.491Z,1513223707.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:07.872Z,1513223707.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:07.888Z,1513223707.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:08.259Z,1513223708.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:08.291Z,1513223708.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:08.682Z,1513223708.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:08.697Z,1513223708.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:09.082Z,1513223709.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:09.105Z,1513223709.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:09.480Z,1513223709.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:09.507Z,1513223709.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:09.863Z,1513223709.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:09.879Z,1513223709.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:10.265Z,1513223710.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:10.280Z,1513223710.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:10.666Z,1513223710.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:10.681Z,1513223710.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:11.161Z,1513223711.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:11.215Z,1513223711.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:11.486Z,1513223711.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:11.511Z,1513223711.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:11.877Z,1513223711.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:11.908Z,1513223711.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:12.279Z,1513223712.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:12.310Z,1513223712.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:12.663Z,1513223712.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:12.695Z,1513223712.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:13.132Z,1513223713.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:13.171Z,1513223713.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:13.468Z,1513223713.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:13.483Z,1513223713.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:13.862Z,1513223713.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:13.894Z,1513223713.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:14.273Z,1513223714.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:14.370Z,1513223714.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:14.684Z,1513223714.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:14.758Z,1513223714.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:15.092Z,1513223715.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:15.146Z,1513223715.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:15.473Z,1513223715.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:15.511Z,1513223715.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:15.863Z,1513223715.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:15.923Z,1513223715.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:16.262Z,1513223716.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:16.277Z,1513223716.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:16.660Z,1513223716.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:16.761Z,1513223716.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:17.060Z,1513223717.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:17.095Z,1513223717.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:17.482Z,1513223717.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:17.501Z,1513223717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:17.873Z,1513223717.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:17.899Z,1513223717.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:18.274Z,1513223718.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:18.303Z,1513223718.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:18.667Z,1513223718.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:18.698Z,1513223718.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:19.066Z,1513223719.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:19.080Z,1513223719.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:19.469Z,1513223719.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:19.496Z,1513223719.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:19.868Z,1513223719.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:19.884Z,1513223719.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:20.265Z,1513223720.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:20.279Z,1513223720.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:20.692Z,1513223720.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:20.794Z,1513223720.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:21.083Z,1513223721.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:21.097Z,1513223721.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:21.487Z,1513223721.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:21.501Z,1513223721.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:21.864Z,1513223721.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:21.895Z,1513223721.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:22.259Z,1513223722.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:22.300Z,1513223722.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:22.663Z,1513223722.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:22.678Z,1513223722.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:23.075Z,1513223723.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:23.103Z,1513223723.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:23.477Z,1513223723.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:23.503Z,1513223723.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:23.877Z,1513223723.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:23.904Z,1513223723.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:24.282Z,1513223724.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:24.320Z,1513223724.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:24.664Z,1513223724.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:24.687Z,1513223724.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:25.123Z,1513223725.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:25.155Z,1513223725.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:25.459Z,1513223725.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:25.494Z,1513223725.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:25.860Z,1513223725.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:25.887Z,1513223725.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:26.263Z,1513223726.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:26.302Z,1513223726.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:26.674Z,1513223726.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:26.707Z,1513223726.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:27.142Z,1513223727.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:27.193Z,1513223727.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:27.482Z,1513223727.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:27.503Z,1513223727.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:27.870Z,1513223727.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:27.884Z,1513223727.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:28.279Z,1513223728.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:28.294Z,1513223728.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:28.661Z,1513223728.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:28.699Z,1513223728.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:29.076Z,1513223729.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:29.101Z,1513223729.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:29.484Z,1513223729.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:29.499Z,1513223729.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:29.880Z,1513223729.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:29.895Z,1513223729.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:30.274Z,1513223730.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:30.299Z,1513223730.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:30.679Z,1513223730.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:30.768Z,1513223730.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:31.064Z,1513223731.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:31.083Z,1513223731.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:31.463Z,1513223731.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:31.490Z,1513223731.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:31.872Z,1513223731.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:31.892Z,1513223731.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:32.267Z,1513223732.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:32.283Z,1513223732.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:32.674Z,1513223732.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:32.689Z,1513223732.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:33.086Z,1513223733.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:33.101Z,1513223733.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:33.529Z,1513223733.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:33.557Z,1513223733.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:33.859Z,1513223733.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:33.884Z,1513223733.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:34.259Z,1513223734.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:34.297Z,1513223734.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:34.673Z,1513223734.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:34.695Z,1513223734.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:35.060Z,1513223735.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:35.095Z,1513223735.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:35.470Z,1513223735.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:35.507Z,1513223735.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:35.889Z,1513223735.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:35.959Z,1513223735.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:36.278Z,1513223736.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:36.332Z,1513223736.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:36.663Z,1513223736.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:36.711Z,1513223736.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:37.069Z,1513223737.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:37.083Z,1513223737.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:37.474Z,1513223737.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:37.527Z,1513223737.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:37.864Z,1513223737.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:37.896Z,1513223737.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:38.272Z,1513223738.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:38.320Z,1513223738.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:38.680Z,1513223738.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:38.700Z,1513223738.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:39.139Z,1513223739.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:39.179Z,1513223739.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:39.476Z,1513223739.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:39.502Z,1513223739.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:39.858Z,1513223739.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:39.903Z,1513223739.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:40.264Z,1513223740.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:40.291Z,1513223740.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:40.669Z,1513223740.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:40.683Z,1513223740.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:41.080Z,1513223741.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:41.132Z,1513223741.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:41.487Z,1513223741.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:41.502Z,1513223741.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:41.886Z,1513223741.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:41.900Z,1513223741.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:42.273Z,1513223742.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:42.295Z,1513223742.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:42.671Z,1513223742.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:42.692Z,1513223742.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:43.059Z,1513223743.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:43.127Z,1513223743.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:43.469Z,1513223743.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:43.484Z,1513223743.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:43.866Z,1513223743.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:43.881Z,1513223743.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:44.269Z,1513223744.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:44.283Z,1513223744.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:44.679Z,1513223744.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:44.728Z,1513223744.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:45.080Z,1513223745.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:45.096Z,1513223745.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:45.480Z,1513223745.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:45.495Z,1513223745.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:45.856Z,1513223745.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:45.883Z,1513223745.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:46.288Z,1513223746.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:46.323Z,1513223746.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:46.660Z,1513223746.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:46.704Z,1513223746.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:47.059Z,1513223747.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:47.092Z,1513223747.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:47.500Z,1513223747.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:47.523Z,1513223747.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:47.874Z,1513223747.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:47.902Z,1513223747.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:48.274Z,1513223748.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:48.301Z,1513223748.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:48.662Z,1513223748.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:48.677Z,1513223748.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:49.067Z,1513223749.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:49.082Z,1513223749.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:49.504Z,1513223749.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:49.543Z,1513223749.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:49.872Z,1513223749.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:49.886Z,1513223749.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:50.269Z,1513223750.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:50.291Z,1513223750.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:50.674Z,1513223750.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:50.689Z,1513223750.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:51.089Z,1513223751.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:51.111Z,1513223751.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:51.476Z,1513223751.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:51.532Z,1513223751.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:51.859Z,1513223751.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:51.887Z,1513223751.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:52.272Z,1513223752.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:52.287Z,1513223752.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:52.676Z,1513223752.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:52.724Z,1513223752.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:53.104Z,1513223753.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:53.143Z,1513223753.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:53.469Z,1513223753.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:53.500Z,1513223753.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:53.876Z,1513223753.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:53.911Z,1513223753.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:54.274Z,1513223754.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:54.303Z,1513223754.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:54.668Z,1513223754.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:54.694Z,1513223754.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:55.146Z,1513223755.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:55.176Z,1513223755.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:55.464Z,1513223755.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:55.487Z,1513223755.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:55.898Z,1513223755.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:55.935Z,1513223755.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:55.938Z,1513223755.938 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T03:50:55.9Z
2017-12-14T03:55:55.938Z,1513223755.938 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T03:55:55.939Z,1513223755.939 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T03:55:56.268Z,1513223756.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:56.291Z,1513223756.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:57.164Z,1513223757.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:57.179Z,1513223757.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:55:57.294Z,1513223757.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:55:57.322Z,1513223757.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:00.656Z,1513223760.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:00.775Z,1513223760.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:00.841Z,1513223760.841 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0080.lzma
2017-12-14T03:56:00.876Z,1513223760.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:00.913Z,1513223760.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:01.251Z,1513223761.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:01.295Z,1513223761.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:01.633Z,1513223761.633 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0080.lzma.bak
2017-12-14T03:56:01.633Z,1513223761.633 [DataOverHttps](INFO): SBD MOMSN=5437498
2017-12-14T03:56:01.738Z,1513223761.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:01.771Z,1513223761.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:03.041Z,1513223763.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:03.096Z,1513223763.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:03.218Z,1513223763.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:03.255Z,1513223763.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:06.569Z,1513223766.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:06.611Z,1513223766.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:06.722Z,1513223766.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:06.754Z,1513223766.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:07.111Z,1513223767.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:07.183Z,1513223767.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:07.472Z,1513223767.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:07.496Z,1513223767.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:07.862Z,1513223767.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:07.886Z,1513223767.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:08.272Z,1513223768.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:08.299Z,1513223768.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:11.777Z,1513223771.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:11.801Z,1513223771.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:11.889Z,1513223771.889 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0081.lzma
2017-12-14T03:56:11.932Z,1513223771.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:11.978Z,1513223771.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:12.266Z,1513223772.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:12.298Z,1513223772.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:12.628Z,1513223772.628 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0081.lzma.bak
2017-12-14T03:56:12.628Z,1513223772.628 [DataOverHttps](INFO): SBD MOMSN=5437500
2017-12-14T03:56:12.670Z,1513223772.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:12.687Z,1513223772.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:13.816Z,1513223773.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:13.832Z,1513223773.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:13.836Z,1513223773.836 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T03:56:13.836Z,1513223773.836 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T03:56:13.836Z,1513223773.836 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T03:56:13.932Z,1513223773.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:13.983Z,1513223773.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:17.389Z,1513223777.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:17.435Z,1513223777.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:17.543Z,1513223777.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:17.587Z,1513223777.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:17.906Z,1513223777.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:17.990Z,1513223777.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:18.334Z,1513223778.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:18.383Z,1513223778.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:18.693Z,1513223778.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:18.742Z,1513223778.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:19.150Z,1513223779.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:19.173Z,1513223779.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:19.506Z,1513223779.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:19.546Z,1513223779.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:19.909Z,1513223779.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:19.932Z,1513223779.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:20.295Z,1513223780.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:20.331Z,1513223780.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:20.683Z,1513223780.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:20.773Z,1513223780.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:21.120Z,1513223781.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:21.177Z,1513223781.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:21.527Z,1513223781.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:21.614Z,1513223781.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:21.883Z,1513223781.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:21.918Z,1513223781.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:22.280Z,1513223782.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:22.295Z,1513223782.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:22.711Z,1513223782.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:22.726Z,1513223782.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:23.143Z,1513223783.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:23.185Z,1513223783.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:23.496Z,1513223783.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:23.512Z,1513223783.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:23.890Z,1513223783.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:23.909Z,1513223783.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:24.294Z,1513223784.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:24.315Z,1513223784.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:24.698Z,1513223784.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:24.800Z,1513223784.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:25.095Z,1513223785.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:25.230Z,1513223785.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:25.498Z,1513223785.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:25.531Z,1513223785.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:25.902Z,1513223785.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:25.925Z,1513223785.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:26.300Z,1513223786.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:26.338Z,1513223786.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:26.691Z,1513223786.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:26.735Z,1513223786.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:27.110Z,1513223787.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:27.160Z,1513223787.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:27.496Z,1513223787.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:27.511Z,1513223787.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:27.899Z,1513223787.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:27.913Z,1513223787.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:28.288Z,1513223788.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:28.340Z,1513223788.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:28.698Z,1513223788.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:28.782Z,1513223788.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:29.097Z,1513223789.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:29.112Z,1513223789.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:29.498Z,1513223789.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:29.562Z,1513223789.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:29.894Z,1513223789.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:29.918Z,1513223789.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:30.292Z,1513223790.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:30.316Z,1513223790.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:30.810Z,1513223790.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:30.879Z,1513223790.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:31.095Z,1513223791.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:31.173Z,1513223791.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:31.517Z,1513223791.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:31.555Z,1513223791.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:31.899Z,1513223791.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:31.941Z,1513223791.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:32.306Z,1513223792.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:32.336Z,1513223792.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:32.697Z,1513223792.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:32.751Z,1513223792.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:33.094Z,1513223793.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:33.122Z,1513223793.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:33.495Z,1513223793.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:33.519Z,1513223793.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:33.885Z,1513223793.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:33.923Z,1513223793.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:34.284Z,1513223794.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:34.348Z,1513223794.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:34.697Z,1513223794.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:34.739Z,1513223794.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:35.148Z,1513223795.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:35.183Z,1513223795.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:35.542Z,1513223795.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:35.592Z,1513223795.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:35.892Z,1513223795.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:35.907Z,1513223795.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:36.295Z,1513223796.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:36.310Z,1513223796.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:36.741Z,1513223796.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:36.799Z,1513223796.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:37.138Z,1513223797.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:37.193Z,1513223797.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:37.539Z,1513223797.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:37.584Z,1513223797.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:37.900Z,1513223797.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:37.920Z,1513223797.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:38.318Z,1513223798.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:38.349Z,1513223798.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:38.693Z,1513223798.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:38.802Z,1513223798.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:39.100Z,1513223799.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:39.139Z,1513223799.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:39.507Z,1513223799.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:39.522Z,1513223799.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:39.884Z,1513223799.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:39.935Z,1513223799.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:40.315Z,1513223800.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:40.331Z,1513223800.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:40.755Z,1513223800.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:40.844Z,1513223800.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:41.126Z,1513223801.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:41.141Z,1513223801.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:41.510Z,1513223801.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:41.535Z,1513223801.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:41.891Z,1513223801.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:41.932Z,1513223801.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:42.295Z,1513223802.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:42.334Z,1513223802.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:42.696Z,1513223802.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:42.862Z,1513223802.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:43.093Z,1513223803.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:43.112Z,1513223803.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:43.500Z,1513223803.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:43.537Z,1513223803.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:43.901Z,1513223803.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:43.936Z,1513223803.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:44.334Z,1513223804.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:44.373Z,1513223804.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:44.684Z,1513223804.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:44.794Z,1513223804.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:45.087Z,1513223805.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:45.153Z,1513223805.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:45.494Z,1513223805.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:45.520Z,1513223805.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:45.887Z,1513223805.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:45.930Z,1513223805.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:46.286Z,1513223806.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:46.333Z,1513223806.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:46.740Z,1513223806.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:46.857Z,1513223806.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:47.121Z,1513223807.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:47.164Z,1513223807.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:47.496Z,1513223807.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:47.543Z,1513223807.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:47.889Z,1513223807.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:47.952Z,1513223807.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:48.289Z,1513223808.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:48.339Z,1513223808.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:48.701Z,1513223808.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:48.746Z,1513223808.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:49.136Z,1513223809.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:49.180Z,1513223809.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:49.499Z,1513223809.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:49.525Z,1513223809.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:49.904Z,1513223809.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:49.936Z,1513223809.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:50.304Z,1513223810.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:50.336Z,1513223810.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:50.697Z,1513223810.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:50.811Z,1513223810.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:51.150Z,1513223811.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:51.212Z,1513223811.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:51.519Z,1513223811.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:51.587Z,1513223811.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:51.900Z,1513223811.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:51.963Z,1513223811.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:52.285Z,1513223812.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:52.306Z,1513223812.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:52.694Z,1513223812.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:52.782Z,1513223812.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:53.107Z,1513223813.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:53.148Z,1513223813.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:53.498Z,1513223813.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:53.529Z,1513223813.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:53.886Z,1513223813.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:53.987Z,1513223813.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:54.283Z,1513223814.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:54.316Z,1513223814.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:54.688Z,1513223814.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:54.784Z,1513223814.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:55.086Z,1513223815.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:55.117Z,1513223815.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:55.504Z,1513223815.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:55.530Z,1513223815.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:55.889Z,1513223815.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:55.931Z,1513223815.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:56.301Z,1513223816.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:56.331Z,1513223816.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:56.691Z,1513223816.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:56.741Z,1513223816.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:57.108Z,1513223817.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:57.142Z,1513223817.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:57.501Z,1513223817.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:57.516Z,1513223817.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:57.898Z,1513223817.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:57.920Z,1513223817.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:58.281Z,1513223818.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:58.308Z,1513223818.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:58.705Z,1513223818.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:58.796Z,1513223818.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:59.106Z,1513223819.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:59.120Z,1513223819.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:59.502Z,1513223819.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:59.522Z,1513223819.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:56:59.885Z,1513223819.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:56:59.921Z,1513223819.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:00.305Z,1513223820.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:00.362Z,1513223820.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:00.684Z,1513223820.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:00.720Z,1513223820.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:01.083Z,1513223821.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:01.118Z,1513223821.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:01.511Z,1513223821.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:01.525Z,1513223821.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:01.893Z,1513223821.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:01.923Z,1513223821.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:02.307Z,1513223822.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:02.365Z,1513223822.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:02.687Z,1513223822.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:02.719Z,1513223822.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:03.143Z,1513223823.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:03.163Z,1513223823.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:03.520Z,1513223823.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:03.556Z,1513223823.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:03.561Z,1513223823.561 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2017-12-14T03:57:03.561Z,1513223823.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T03:57:03.563Z,1513223823.563 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:03.563Z,1513223823.563 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2017-12-14T03:57:03.563Z,1513223823.563 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T03:57:03.569Z,1513223823.569 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:03.569Z,1513223823.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2017-12-14T03:57:03.570Z,1513223823.570 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T03:57:03.618Z,1513223823.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T03:57:03.618Z,1513223823.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T03:57:03.618Z,1513223823.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T03:57:03.906Z,1513223823.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:03.960Z,1513223823.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T03:57:03.960Z,1513223823.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2017-12-14T03:57:03.961Z,1513223823.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T03:57:03.961Z,1513223823.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2017-12-14T03:57:03.961Z,1513223823.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T03:57:03.961Z,1513223823.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2017-12-14T03:57:04.287Z,1513223824.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:04.312Z,1513223824.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T03:57:04.313Z,1513223824.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:57:04.313Z,1513223824.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:57:04.314Z,1513223824.314 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T03:57:04.314Z,1513223824.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:57:04.314Z,1513223824.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:57:04.315Z,1513223824.315 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T03:57:04.315Z,1513223824.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T03:57:04.315Z,1513223824.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T03:57:04.701Z,1513223824.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:04.719Z,1513223824.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:05.156Z,1513223825.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:05.192Z,1513223825.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:05.498Z,1513223825.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:05.528Z,1513223825.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:05.883Z,1513223825.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:05.924Z,1513223825.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:06.287Z,1513223826.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:06.326Z,1513223826.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:06.685Z,1513223826.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:06.700Z,1513223826.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:07.092Z,1513223827.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:07.111Z,1513223827.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:07.498Z,1513223827.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:07.561Z,1513223827.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:07.896Z,1513223827.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:07.911Z,1513223827.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:08.298Z,1513223828.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:08.312Z,1513223828.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:08.693Z,1513223828.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:08.759Z,1513223828.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:09.101Z,1513223829.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:09.116Z,1513223829.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:09.502Z,1513223829.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:09.517Z,1513223829.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:09.885Z,1513223829.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:09.918Z,1513223829.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:10.283Z,1513223830.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:10.320Z,1513223830.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:10.693Z,1513223830.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:10.784Z,1513223830.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:11.101Z,1513223831.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:11.115Z,1513223831.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:11.544Z,1513223831.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:11.610Z,1513223831.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:11.893Z,1513223831.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:11.908Z,1513223831.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:12.292Z,1513223832.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:12.307Z,1513223832.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:12.694Z,1513223832.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:12.766Z,1513223832.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:13.122Z,1513223833.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:13.195Z,1513223833.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:13.513Z,1513223833.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:13.528Z,1513223833.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:13.913Z,1513223833.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:13.970Z,1513223833.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:14.318Z,1513223834.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:14.333Z,1513223834.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:17.868Z,1513223837.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:17.911Z,1513223837.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:18.021Z,1513223838.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:18.067Z,1513223838.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:18.378Z,1513223838.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:18.415Z,1513223838.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:18.774Z,1513223838.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:18.790Z,1513223838.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:19.180Z,1513223839.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:19.196Z,1513223839.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:19.575Z,1513223839.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:19.619Z,1513223839.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:19.959Z,1513223839.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:19.995Z,1513223839.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:20.375Z,1513223840.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:20.398Z,1513223840.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:20.830Z,1513223840.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:20.851Z,1513223840.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:21.175Z,1513223841.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:21.214Z,1513223841.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:21.561Z,1513223841.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:21.598Z,1513223841.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:21.963Z,1513223841.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:21.991Z,1513223841.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:22.380Z,1513223842.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:22.406Z,1513223842.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:22.836Z,1513223842.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:22.863Z,1513223842.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:23.194Z,1513223843.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:23.215Z,1513223843.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:23.560Z,1513223843.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:23.599Z,1513223843.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:23.957Z,1513223843.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:23.972Z,1513223843.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:24.378Z,1513223844.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:24.412Z,1513223844.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:24.820Z,1513223844.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:24.834Z,1513223844.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:25.170Z,1513223845.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:25.214Z,1513223845.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:25.564Z,1513223845.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:25.599Z,1513223845.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:25.963Z,1513223845.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:26.039Z,1513223846.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:26.386Z,1513223846.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:26.401Z,1513223846.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:26.815Z,1513223846.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:26.839Z,1513223846.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:27.190Z,1513223847.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:27.215Z,1513223847.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:27.570Z,1513223847.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:27.586Z,1513223847.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:27.966Z,1513223847.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:27.985Z,1513223847.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:28.385Z,1513223848.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:28.419Z,1513223848.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:28.791Z,1513223848.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:28.859Z,1513223848.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:29.218Z,1513223849.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:29.266Z,1513223849.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:29.579Z,1513223849.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:29.594Z,1513223849.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:29.960Z,1513223849.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:29.987Z,1513223849.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:30.374Z,1513223850.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:30.390Z,1513223850.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:30.770Z,1513223850.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:30.784Z,1513223850.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:31.171Z,1513223851.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:31.215Z,1513223851.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:31.547Z,1513223851.547 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T03:57:31.548Z,1513223851.548 [NAL9602] Data Fault, FailCount= 4
2017-12-14T03:57:31.548Z,1513223851.548 [NAL9602](ERROR): Data Fault
2017-12-14T03:57:31.576Z,1513223851.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:31.622Z,1513223851.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:31.635Z,1513223851.635 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T03:57:31.947Z,1513223851.947 [NAL9602](INFO): Powering down
2017-12-14T03:57:31.982Z,1513223851.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:31.996Z,1513223851.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:32.360Z,1513223852.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:32.391Z,1513223852.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:32.759Z,1513223852.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:32.792Z,1513223852.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:32.806Z,1513223852.806 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T03:57:32.806Z,1513223852.806 [NAL9602] No Fault, FailCount= 4
2017-12-14T03:57:33.159Z,1513223853.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:33.195Z,1513223853.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:33.560Z,1513223853.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:33.587Z,1513223853.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:33.960Z,1513223853.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:33.975Z,1513223853.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:34.364Z,1513223854.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:34.378Z,1513223854.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:34.810Z,1513223854.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:34.831Z,1513223854.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:35.172Z,1513223855.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:35.196Z,1513223855.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:35.579Z,1513223855.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:35.621Z,1513223855.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:35.970Z,1513223855.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:35.985Z,1513223855.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:36.372Z,1513223856.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:36.387Z,1513223856.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:36.809Z,1513223856.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:36.902Z,1513223856.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:37.163Z,1513223857.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:37.199Z,1513223857.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:37.573Z,1513223857.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:37.630Z,1513223857.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:37.972Z,1513223857.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:37.986Z,1513223857.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:38.369Z,1513223858.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:38.423Z,1513223858.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:38.832Z,1513223858.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:38.880Z,1513223858.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:39.170Z,1513223859.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:39.198Z,1513223859.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:39.560Z,1513223859.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:39.592Z,1513223859.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:39.964Z,1513223859.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:39.990Z,1513223859.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:40.376Z,1513223860.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:40.408Z,1513223860.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:40.808Z,1513223860.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:40.842Z,1513223860.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:41.160Z,1513223861.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:41.195Z,1513223861.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:41.563Z,1513223861.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:41.603Z,1513223861.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:41.953Z,1513223861.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:41.968Z,1513223861.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:42.369Z,1513223862.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:42.383Z,1513223862.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:42.808Z,1513223862.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:42.855Z,1513223862.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:43.172Z,1513223863.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:43.199Z,1513223863.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:43.574Z,1513223863.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:43.589Z,1513223863.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:43.971Z,1513223863.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:43.986Z,1513223863.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:44.354Z,1513223864.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:44.380Z,1513223864.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:44.771Z,1513223864.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:44.785Z,1513223864.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:45.159Z,1513223865.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:45.226Z,1513223865.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:45.559Z,1513223865.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:45.586Z,1513223865.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:45.959Z,1513223865.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:45.991Z,1513223865.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:46.363Z,1513223866.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:46.390Z,1513223866.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:46.755Z,1513223866.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:46.812Z,1513223866.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:47.159Z,1513223867.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:47.198Z,1513223867.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:47.563Z,1513223867.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:47.595Z,1513223867.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:47.964Z,1513223867.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:47.992Z,1513223867.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:48.378Z,1513223868.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:48.441Z,1513223868.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:48.798Z,1513223868.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:48.847Z,1513223868.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:49.163Z,1513223869.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:49.203Z,1513223869.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:49.559Z,1513223869.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:49.573Z,1513223869.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:49.963Z,1513223869.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:50.002Z,1513223870.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:50.353Z,1513223870.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:50.369Z,1513223870.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:50.800Z,1513223870.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:50.835Z,1513223870.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:51.172Z,1513223871.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:51.204Z,1513223871.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:51.575Z,1513223871.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:51.606Z,1513223871.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:51.969Z,1513223871.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:51.984Z,1513223871.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:52.366Z,1513223872.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:52.381Z,1513223872.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:52.790Z,1513223872.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:52.829Z,1513223872.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:53.166Z,1513223873.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:53.197Z,1513223873.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:53.574Z,1513223873.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:53.588Z,1513223873.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:53.957Z,1513223873.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:53.984Z,1513223873.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:54.375Z,1513223874.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:54.389Z,1513223874.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:54.863Z,1513223874.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:54.886Z,1513223874.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:55.183Z,1513223875.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:55.219Z,1513223875.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:55.567Z,1513223875.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:55.591Z,1513223875.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:55.973Z,1513223875.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:55.988Z,1513223875.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:56.375Z,1513223876.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:56.391Z,1513223876.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:56.826Z,1513223876.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:56.848Z,1513223876.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:57.180Z,1513223877.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:57.251Z,1513223877.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:57.572Z,1513223877.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:57.588Z,1513223877.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:57.970Z,1513223877.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:57.985Z,1513223877.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:58.359Z,1513223878.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:58.425Z,1513223878.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:58.771Z,1513223878.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:58.788Z,1513223878.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:59.160Z,1513223879.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:59.230Z,1513223879.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:59.560Z,1513223879.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:59.591Z,1513223879.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:57:59.957Z,1513223879.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:57:59.996Z,1513223879.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:00.365Z,1513223880.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:00.392Z,1513223880.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:00.763Z,1513223880.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:00.791Z,1513223880.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:01.206Z,1513223881.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:01.243Z,1513223881.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:01.559Z,1513223881.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:01.595Z,1513223881.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:01.963Z,1513223881.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:01.994Z,1513223881.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:02.341Z,1513223882.341 [NAL9602](INFO): Powering up NAL9602
2017-12-14T03:58:02.360Z,1513223882.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:02.382Z,1513223882.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:02.807Z,1513223882.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:02.833Z,1513223882.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:03.166Z,1513223883.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:03.181Z,1513223883.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:03.566Z,1513223883.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:03.584Z,1513223883.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:03.968Z,1513223883.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:03.982Z,1513223883.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:04.360Z,1513223884.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:04.411Z,1513223884.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:04.795Z,1513223884.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:04.830Z,1513223884.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:05.161Z,1513223885.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:05.193Z,1513223885.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:05.563Z,1513223885.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:05.596Z,1513223885.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:05.960Z,1513223885.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:05.990Z,1513223885.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:06.364Z,1513223886.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:06.398Z,1513223886.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:06.807Z,1513223886.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:06.838Z,1513223886.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:07.166Z,1513223887.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:07.206Z,1513223887.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:07.618Z,1513223887.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:07.656Z,1513223887.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:07.993Z,1513223887.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:08.012Z,1513223888.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:08.360Z,1513223888.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:08.375Z,1513223888.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:08.808Z,1513223888.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:08.833Z,1513223888.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:09.172Z,1513223889.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:09.199Z,1513223889.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:09.572Z,1513223889.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:09.588Z,1513223889.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:09.970Z,1513223889.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:09.985Z,1513223889.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:10.367Z,1513223890.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:10.388Z,1513223890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:10.863Z,1513223890.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:10.917Z,1513223890.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:11.187Z,1513223891.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:11.230Z,1513223891.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:11.560Z,1513223891.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:11.595Z,1513223891.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:11.963Z,1513223891.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:11.999Z,1513223891.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:12.363Z,1513223892.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:12.403Z,1513223892.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:12.769Z,1513223892.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:12.800Z,1513223892.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:13.154Z,1513223893.154 [NAL9602](INFO): NAL9602 initialized
2017-12-14T03:58:13.172Z,1513223893.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:13.198Z,1513223893.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:13.566Z,1513223893.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:13.581Z,1513223893.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:13.979Z,1513223893.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:14.002Z,1513223894.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:14.375Z,1513223894.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:14.399Z,1513223894.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:17.893Z,1513223897.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:17.918Z,1513223897.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:18.019Z,1513223898.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:18.068Z,1513223898.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:18.379Z,1513223898.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:18.394Z,1513223898.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:18.823Z,1513223898.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:18.886Z,1513223898.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:19.182Z,1513223899.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:19.209Z,1513223899.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:19.586Z,1513223899.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:19.607Z,1513223899.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:19.984Z,1513223899.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:19.999Z,1513223899.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:20.445Z,1513223900.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:20.460Z,1513223900.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:20.805Z,1513223900.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:20.851Z,1513223900.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:21.165Z,1513223901.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:21.192Z,1513223901.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:21.572Z,1513223901.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:21.607Z,1513223901.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:21.971Z,1513223901.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:22.004Z,1513223902.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:22.361Z,1513223902.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:22.375Z,1513223902.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:22.810Z,1513223902.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:22.823Z,1513223902.823 [BPC1](ERROR): Failed to receive battery data
2017-12-14T03:58:22.823Z,1513223902.823 [BPC1] Communications Fault, FailCount= 1
2017-12-14T03:58:22.823Z,1513223902.823 [BPC1](ERROR): Communications Fault
2017-12-14T03:58:22.857Z,1513223902.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:22.883Z,1513223902.883 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T03:58:23.192Z,1513223903.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:23.207Z,1513223903.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:23.604Z,1513223903.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:23.635Z,1513223903.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:23.977Z,1513223903.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:24.010Z,1513223904.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:24.023Z,1513223904.023 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T03:58:24.024Z,1513223904.024 [BPC1] No Fault, FailCount= 1
2017-12-14T03:58:24.375Z,1513223904.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:24.447Z,1513223904.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:24.816Z,1513223904.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:24.872Z,1513223904.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:25.179Z,1513223905.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:25.194Z,1513223905.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:25.589Z,1513223905.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:25.620Z,1513223905.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:25.989Z,1513223905.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:26.003Z,1513223906.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:26.390Z,1513223906.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:26.423Z,1513223906.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:26.817Z,1513223906.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:26.844Z,1513223906.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:27.181Z,1513223907.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:27.196Z,1513223907.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:27.588Z,1513223907.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:27.603Z,1513223907.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:27.989Z,1513223907.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:28.003Z,1513223908.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:28.386Z,1513223908.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:28.411Z,1513223908.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:28.780Z,1513223908.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:28.796Z,1513223908.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:29.182Z,1513223909.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:29.196Z,1513223909.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:29.589Z,1513223909.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:29.604Z,1513223909.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:29.989Z,1513223909.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:30.012Z,1513223910.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:30.393Z,1513223910.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:30.408Z,1513223910.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:30.801Z,1513223910.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:30.840Z,1513223910.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:31.171Z,1513223911.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:31.192Z,1513223911.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:31.581Z,1513223911.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:31.596Z,1513223911.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:31.981Z,1513223911.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:31.995Z,1513223911.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:32.390Z,1513223912.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:32.412Z,1513223912.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:32.811Z,1513223912.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:32.864Z,1513223912.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:33.211Z,1513223913.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:33.238Z,1513223913.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:33.598Z,1513223913.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:33.628Z,1513223913.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:33.985Z,1513223913.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:34.000Z,1513223914.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:34.385Z,1513223914.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:34.407Z,1513223914.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:34.805Z,1513223914.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:34.836Z,1513223914.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:35.169Z,1513223915.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:35.200Z,1513223915.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:35.597Z,1513223915.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:35.612Z,1513223915.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:36.001Z,1513223916.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:36.016Z,1513223916.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:36.416Z,1513223916.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:36.447Z,1513223916.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:36.819Z,1513223916.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:36.849Z,1513223916.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:37.172Z,1513223917.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:37.199Z,1513223917.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:37.596Z,1513223917.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:37.611Z,1513223917.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:37.997Z,1513223917.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:38.012Z,1513223918.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:38.394Z,1513223918.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:38.408Z,1513223918.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:38.833Z,1513223918.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:38.848Z,1513223918.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:39.187Z,1513223919.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:39.203Z,1513223919.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:39.594Z,1513223919.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:39.645Z,1513223919.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:39.990Z,1513223919.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:40.011Z,1513223920.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:40.390Z,1513223920.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:40.405Z,1513223920.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:40.784Z,1513223920.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:40.800Z,1513223920.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:41.185Z,1513223921.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:41.200Z,1513223921.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:41.590Z,1513223921.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:41.605Z,1513223921.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:41.990Z,1513223921.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:42.005Z,1513223922.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:42.390Z,1513223922.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:42.411Z,1513223922.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:42.822Z,1513223922.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:42.849Z,1513223922.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:43.194Z,1513223923.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:43.208Z,1513223923.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:43.594Z,1513223923.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:43.610Z,1513223923.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:43.998Z,1513223923.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:44.031Z,1513223924.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:44.386Z,1513223924.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:44.413Z,1513223924.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:44.814Z,1513223924.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:44.863Z,1513223924.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:45.175Z,1513223925.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:45.231Z,1513223925.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:45.587Z,1513223925.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:45.611Z,1513223925.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:46.019Z,1513223926.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:46.072Z,1513223926.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:46.381Z,1513223926.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:46.423Z,1513223926.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:46.811Z,1513223926.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:46.840Z,1513223926.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:47.178Z,1513223927.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:47.222Z,1513223927.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:47.592Z,1513223927.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:47.622Z,1513223927.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:47.994Z,1513223927.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:48.019Z,1513223928.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:48.390Z,1513223928.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:48.423Z,1513223928.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:48.815Z,1513223928.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:48.838Z,1513223928.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:49.193Z,1513223929.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:49.232Z,1513223929.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:49.594Z,1513223929.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:49.618Z,1513223929.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:49.990Z,1513223929.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:50.023Z,1513223930.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:50.390Z,1513223930.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:50.420Z,1513223930.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:50.813Z,1513223930.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:50.838Z,1513223930.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:51.178Z,1513223931.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:51.193Z,1513223931.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:51.594Z,1513223931.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:51.618Z,1513223931.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:51.993Z,1513223931.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:52.019Z,1513223932.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:52.432Z,1513223932.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:52.478Z,1513223932.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:52.832Z,1513223932.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:52.880Z,1513223932.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:53.178Z,1513223933.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:53.193Z,1513223933.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:53.589Z,1513223933.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:53.620Z,1513223933.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:53.979Z,1513223933.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:53.994Z,1513223933.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:54.390Z,1513223934.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:54.421Z,1513223934.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:54.777Z,1513223934.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:54.793Z,1513223934.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:55.178Z,1513223935.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:55.193Z,1513223935.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:55.612Z,1513223935.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:55.685Z,1513223935.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:55.994Z,1513223935.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:56.020Z,1513223936.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:56.297Z,1513223936.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:56.389Z,1513223936.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:56.420Z,1513223936.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:56.777Z,1513223936.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:56.792Z,1513223936.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:57.095Z,1513223937.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:57.183Z,1513223937.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:57.223Z,1513223937.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:57.517Z,1513223937.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:57.578Z,1513223937.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:57.594Z,1513223937.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:57.989Z,1513223937.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:58.004Z,1513223938.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:58.313Z,1513223938.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:58.393Z,1513223938.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:58.427Z,1513223938.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:58.857Z,1513223938.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:58.907Z,1513223938.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:59.109Z,1513223939.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:59.177Z,1513223939.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:59.212Z,1513223939.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:59.513Z,1513223939.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:59.571Z,1513223939.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:58:59.610Z,1513223939.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:58:59.971Z,1513223939.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:00.009Z,1513223940.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:00.375Z,1513223940.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:00.406Z,1513223940.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:00.811Z,1513223940.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:00.855Z,1513223940.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:01.192Z,1513223941.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:01.207Z,1513223941.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:01.599Z,1513223941.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:01.614Z,1513223941.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:01.976Z,1513223941.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:02.008Z,1513223942.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:02.379Z,1513223942.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:02.412Z,1513223942.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:02.438Z,1513223942.438 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T03:59:02.820Z,1513223942.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:02.839Z,1513223942.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:03.184Z,1513223943.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:03.203Z,1513223943.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:03.590Z,1513223943.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:03.619Z,1513223943.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:03.989Z,1513223943.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:04.020Z,1513223944.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:04.389Z,1513223944.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:04.404Z,1513223944.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:04.787Z,1513223944.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:04.802Z,1513223944.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:05.219Z,1513223945.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:05.243Z,1513223945.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:05.605Z,1513223945.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:05.620Z,1513223945.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:05.989Z,1513223945.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:06.013Z,1513223946.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:06.389Z,1513223946.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:06.443Z,1513223946.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:06.837Z,1513223946.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:06.882Z,1513223946.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:07.176Z,1513223947.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:07.196Z,1513223947.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:07.589Z,1513223947.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:07.647Z,1513223947.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:07.989Z,1513223947.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:08.003Z,1513223948.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:08.393Z,1513223948.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:08.434Z,1513223948.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:08.783Z,1513223948.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:08.834Z,1513223948.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:09.182Z,1513223949.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:09.205Z,1513223949.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:09.584Z,1513223949.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:09.635Z,1513223949.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:09.983Z,1513223949.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:10.003Z,1513223950.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:10.297Z,1513223950.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:10.381Z,1513223950.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:10.395Z,1513223950.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:10.772Z,1513223950.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:10.787Z,1513223950.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:11.095Z,1513223951.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:11.175Z,1513223951.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:11.190Z,1513223951.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:11.513Z,1513223951.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:11.595Z,1513223951.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:11.676Z,1513223951.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:11.985Z,1513223951.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:12.014Z,1513223952.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:12.310Z,1513223952.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:12.393Z,1513223952.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:12.423Z,1513223952.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:12.808Z,1513223952.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:12.836Z,1513223952.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:13.105Z,1513223953.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:13.180Z,1513223953.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:13.204Z,1513223953.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:13.509Z,1513223953.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:13.585Z,1513223953.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:13.615Z,1513223953.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:14.000Z,1513223954.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:14.015Z,1513223954.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:14.378Z,1513223954.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:14.409Z,1513223954.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:17.844Z,1513223957.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:17.892Z,1513223957.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:17.988Z,1513223957.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:18.043Z,1513223958.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:18.374Z,1513223958.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:18.390Z,1513223958.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:18.823Z,1513223958.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:18.841Z,1513223958.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:19.175Z,1513223959.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:19.190Z,1513223959.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:19.564Z,1513223959.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:19.580Z,1513223959.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:19.966Z,1513223959.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:19.981Z,1513223959.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:20.369Z,1513223960.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:20.384Z,1513223960.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:20.792Z,1513223960.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:20.844Z,1513223960.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:21.197Z,1513223961.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:21.230Z,1513223961.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:21.575Z,1513223961.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:21.594Z,1513223961.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:21.959Z,1513223961.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:21.985Z,1513223961.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:22.356Z,1513223962.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:22.390Z,1513223962.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:22.760Z,1513223962.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:22.795Z,1513223962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:23.163Z,1513223963.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:23.223Z,1513223963.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:23.556Z,1513223963.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:23.582Z,1513223963.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:23.967Z,1513223963.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:23.994Z,1513223963.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:24.302Z,1513223964.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:24.396Z,1513223964.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:24.436Z,1513223964.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:24.793Z,1513223964.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:24.808Z,1513223964.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:25.099Z,1513223965.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:25.178Z,1513223965.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:25.205Z,1513223965.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:25.505Z,1513223965.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:25.568Z,1513223965.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:25.592Z,1513223965.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:25.984Z,1513223965.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:26.019Z,1513223966.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:26.302Z,1513223966.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:26.371Z,1513223966.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:26.395Z,1513223966.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:26.818Z,1513223966.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:26.842Z,1513223966.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:27.097Z,1513223967.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:27.174Z,1513223967.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:27.203Z,1513223967.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:27.501Z,1513223967.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:27.612Z,1513223967.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:27.643Z,1513223967.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:27.972Z,1513223967.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:27.987Z,1513223967.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:28.356Z,1513223968.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:28.387Z,1513223968.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:28.803Z,1513223968.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:28.842Z,1513223968.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:29.157Z,1513223969.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:29.180Z,1513223969.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:29.584Z,1513223969.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:29.598Z,1513223969.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:29.969Z,1513223969.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:30.039Z,1513223970.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:30.382Z,1513223970.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:30.404Z,1513223970.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:30.823Z,1513223970.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:30.898Z,1513223970.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:31.171Z,1513223971.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:31.187Z,1513223971.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:31.570Z,1513223971.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:31.623Z,1513223971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:32.001Z,1513223972.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:32.017Z,1513223972.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:32.371Z,1513223972.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:32.385Z,1513223972.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:32.797Z,1513223972.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:32.832Z,1513223972.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:33.156Z,1513223973.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:33.183Z,1513223973.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:33.578Z,1513223973.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:33.603Z,1513223973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:33.981Z,1513223973.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:34.013Z,1513223974.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:34.369Z,1513223974.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:34.395Z,1513223974.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:34.751Z,1513223974.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:34.835Z,1513223974.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:35.168Z,1513223975.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:35.187Z,1513223975.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:35.569Z,1513223975.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:35.583Z,1513223975.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:35.970Z,1513223975.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:35.986Z,1513223975.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:36.373Z,1513223976.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:36.387Z,1513223976.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:36.771Z,1513223976.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:36.785Z,1513223976.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:37.161Z,1513223977.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:37.227Z,1513223977.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:37.556Z,1513223977.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:37.583Z,1513223977.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:37.957Z,1513223977.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:37.994Z,1513223977.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:38.289Z,1513223978.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:38.353Z,1513223978.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:38.383Z,1513223978.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:38.778Z,1513223978.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:38.793Z,1513223978.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:39.087Z,1513223979.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:39.185Z,1513223979.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:39.200Z,1513223979.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:39.497Z,1513223979.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:39.566Z,1513223979.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:39.603Z,1513223979.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:39.964Z,1513223979.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:40.004Z,1513223980.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:40.293Z,1513223980.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:40.385Z,1513223980.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:40.439Z,1513223980.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:40.809Z,1513223980.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:40.842Z,1513223980.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:41.089Z,1513223981.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:41.159Z,1513223981.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:41.190Z,1513223981.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:41.493Z,1513223981.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:41.578Z,1513223981.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:41.599Z,1513223981.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:41.974Z,1513223981.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:41.995Z,1513223981.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:42.377Z,1513223982.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:42.399Z,1513223982.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:42.818Z,1513223982.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:42.839Z,1513223982.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:43.168Z,1513223983.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:43.183Z,1513223983.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:43.591Z,1513223983.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:43.626Z,1513223983.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:43.978Z,1513223983.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:43.999Z,1513223983.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:44.362Z,1513223984.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:44.399Z,1513223984.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:44.812Z,1513223984.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:44.839Z,1513223984.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:45.156Z,1513223985.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:45.187Z,1513223985.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:45.578Z,1513223985.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:45.594Z,1513223985.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:45.978Z,1513223985.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:45.993Z,1513223985.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:46.379Z,1513223986.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:46.399Z,1513223986.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:46.850Z,1513223986.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:46.891Z,1513223986.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:47.164Z,1513223987.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:47.192Z,1513223987.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:47.574Z,1513223987.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:47.603Z,1513223987.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:47.985Z,1513223987.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:47.000Z,1513223988.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:48.385Z,1513223988.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:48.407Z,1513223988.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:48.816Z,1513223988.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:48.900Z,1513223988.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:49.156Z,1513223989.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:49.171Z,1513223989.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:49.557Z,1513223989.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:49.572Z,1513223989.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:49.994Z,1513223989.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:50.042Z,1513223990.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:50.374Z,1513223990.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:50.403Z,1513223990.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:50.785Z,1513223990.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:50.807Z,1513223990.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:51.185Z,1513223991.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:51.206Z,1513223991.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:51.556Z,1513223991.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:51.596Z,1513223991.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:51.964Z,1513223991.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:52.007Z,1513223992.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:52.363Z,1513223992.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:52.430Z,1513223992.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:52.762Z,1513223992.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:52.783Z,1513223992.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:53.194Z,1513223993.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:53.259Z,1513223993.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:53.578Z,1513223993.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:53.609Z,1513223993.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:53.963Z,1513223993.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:54.011Z,1513223994.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:54.359Z,1513223994.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:54.383Z,1513223994.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:54.796Z,1513223994.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:54.819Z,1513223994.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:55.169Z,1513223995.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:55.183Z,1513223995.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:55.571Z,1513223995.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:55.591Z,1513223995.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:55.971Z,1513223995.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:55.991Z,1513223995.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:56.390Z,1513223996.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:56.433Z,1513223996.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:56.800Z,1513223996.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:56.842Z,1513223996.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:57.156Z,1513223997.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:57.191Z,1513223997.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:57.579Z,1513223997.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:57.594Z,1513223997.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:57.978Z,1513223997.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:57.993Z,1513223997.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:58.380Z,1513223998.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:58.395Z,1513223998.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:58.804Z,1513223998.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:58.827Z,1513223998.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:59.164Z,1513223999.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:59.191Z,1513223999.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:59.596Z,1513223999.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:59.627Z,1513223999.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T03:59:59.970Z,1513223999.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T03:59:59.984Z,1513223999.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:00.377Z,1513224000.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:00.391Z,1513224000.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:00.795Z,1513224000.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:00.834Z,1513224000.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:01.156Z,1513224001.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:01.191Z,1513224001.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:01.578Z,1513224001.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:01.593Z,1513224001.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:01.979Z,1513224001.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:01.994Z,1513224001.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:02.379Z,1513224002.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:02.438Z,1513224002.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:02.774Z,1513224002.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:02.880Z,1513224002.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:03.169Z,1513224003.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:03.194Z,1513224003.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:03.563Z,1513224003.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:03.596Z,1513224003.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:03.973Z,1513224003.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:03.995Z,1513224003.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:04.373Z,1513224004.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:04.403Z,1513224004.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:04.403Z,1513224004.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2017-12-14T04:00:04.403Z,1513224004.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:00:04.405Z,1513224004.405 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:04.405Z,1513224004.405 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2017-12-14T04:00:04.405Z,1513224004.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:00:04.407Z,1513224004.407 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:04.407Z,1513224004.407 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2017-12-14T04:00:04.407Z,1513224004.407 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:00:04.419Z,1513224004.419 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:00:04.420Z,1513224004.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:00:04.420Z,1513224004.420 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:00:04.774Z,1513224004.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:04.817Z,1513224004.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:00:04.817Z,1513224004.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2017-12-14T04:00:04.817Z,1513224004.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:00:04.817Z,1513224004.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2017-12-14T04:00:04.818Z,1513224004.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:00:04.818Z,1513224004.818 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2017-12-14T04:00:05.167Z,1513224005.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:05.190Z,1513224005.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:00:05.190Z,1513224005.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:00:05.191Z,1513224005.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:00:05.191Z,1513224005.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:00:05.191Z,1513224005.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:00:05.192Z,1513224005.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:00:05.192Z,1513224005.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:00:05.192Z,1513224005.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:00:05.197Z,1513224005.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:00:05.560Z,1513224005.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:05.584Z,1513224005.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:05.966Z,1513224005.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:05.981Z,1513224005.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:06.365Z,1513224006.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:06.387Z,1513224006.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:06.780Z,1513224006.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:06.799Z,1513224006.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:07.178Z,1513224007.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:07.199Z,1513224007.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:07.578Z,1513224007.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:07.593Z,1513224007.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:07.957Z,1513224007.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:07.992Z,1513224007.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:08.368Z,1513224008.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:08.383Z,1513224008.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:08.791Z,1513224008.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:08.839Z,1513224008.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:09.186Z,1513224009.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:09.226Z,1513224009.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:09.588Z,1513224009.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:09.607Z,1513224009.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:09.989Z,1513224009.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:10.011Z,1513224010.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:10.383Z,1513224010.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:10.399Z,1513224010.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:10.798Z,1513224010.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:10.842Z,1513224010.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:11.160Z,1513224011.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:11.180Z,1513224011.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:11.569Z,1513224011.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:11.603Z,1513224011.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:11.970Z,1513224011.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:12.007Z,1513224012.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:12.396Z,1513224012.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:12.444Z,1513224012.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:12.810Z,1513224012.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:12.846Z,1513224012.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:13.159Z,1513224013.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:13.174Z,1513224013.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:13.578Z,1513224013.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:13.604Z,1513224013.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:13.977Z,1513224013.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:14.011Z,1513224014.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:14.375Z,1513224014.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:14.441Z,1513224014.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:14.805Z,1513224014.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:14.868Z,1513224014.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:18.173Z,1513224018.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:18.188Z,1513224018.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:18.305Z,1513224018.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:18.352Z,1513224018.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:18.677Z,1513224018.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:18.709Z,1513224018.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:19.162Z,1513224019.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:19.211Z,1513224019.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:19.466Z,1513224019.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:19.499Z,1513224019.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:19.867Z,1513224019.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:19.911Z,1513224019.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:20.266Z,1513224020.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:20.280Z,1513224020.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:20.678Z,1513224020.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:20.704Z,1513224020.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:21.123Z,1513224021.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:21.159Z,1513224021.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:21.482Z,1513224021.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:21.510Z,1513224021.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:21.856Z,1513224021.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:21.915Z,1513224021.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:22.259Z,1513224022.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:22.296Z,1513224022.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:22.663Z,1513224022.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:22.697Z,1513224022.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:23.069Z,1513224023.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:23.083Z,1513224023.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:23.468Z,1513224023.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:23.492Z,1513224023.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:23.873Z,1513224023.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:23.889Z,1513224023.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:24.270Z,1513224024.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:24.284Z,1513224024.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:24.681Z,1513224024.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:24.695Z,1513224024.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:25.083Z,1513224025.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:25.111Z,1513224025.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:25.465Z,1513224025.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:25.479Z,1513224025.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:25.867Z,1513224025.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:25.882Z,1513224025.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:26.267Z,1513224026.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:26.282Z,1513224026.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:26.677Z,1513224026.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:26.758Z,1513224026.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:27.077Z,1513224027.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:27.091Z,1513224027.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:27.478Z,1513224027.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:27.492Z,1513224027.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:27.867Z,1513224027.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:27.883Z,1513224027.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:28.288Z,1513224028.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:28.360Z,1513224028.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:28.686Z,1513224028.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:28.751Z,1513224028.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:29.068Z,1513224029.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:29.083Z,1513224029.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:29.472Z,1513224029.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:29.511Z,1513224029.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:29.878Z,1513224029.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:29.910Z,1513224029.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:30.281Z,1513224030.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:30.314Z,1513224030.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:30.673Z,1513224030.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:30.688Z,1513224030.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:31.069Z,1513224031.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:31.084Z,1513224031.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:31.473Z,1513224031.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:31.520Z,1513224031.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:31.870Z,1513224031.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:31.891Z,1513224031.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:32.272Z,1513224032.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:32.288Z,1513224032.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:32.677Z,1513224032.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:32.692Z,1513224032.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:33.139Z,1513224033.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:33.162Z,1513224033.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:33.484Z,1513224033.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:33.499Z,1513224033.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:33.863Z,1513224033.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:33.895Z,1513224033.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:34.260Z,1513224034.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:34.291Z,1513224034.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:34.663Z,1513224034.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:34.709Z,1513224034.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:35.120Z,1513224035.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:35.160Z,1513224035.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:35.467Z,1513224035.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:35.507Z,1513224035.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:35.882Z,1513224035.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:35.908Z,1513224035.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:36.277Z,1513224036.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:36.308Z,1513224036.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:36.674Z,1513224036.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:36.689Z,1513224036.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:37.060Z,1513224037.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:37.088Z,1513224037.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:37.460Z,1513224037.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:37.486Z,1513224037.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:37.878Z,1513224037.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:37.934Z,1513224037.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:38.259Z,1513224038.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:38.295Z,1513224038.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:38.687Z,1513224038.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:38.787Z,1513224038.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:39.089Z,1513224039.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:39.111Z,1513224039.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:39.473Z,1513224039.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:39.507Z,1513224039.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:39.866Z,1513224039.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:39.926Z,1513224039.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:40.267Z,1513224040.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:40.328Z,1513224040.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:40.667Z,1513224040.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:40.727Z,1513224040.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:41.102Z,1513224041.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:41.128Z,1513224041.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:41.468Z,1513224041.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:41.520Z,1513224041.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:41.873Z,1513224041.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:41.896Z,1513224041.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:42.278Z,1513224042.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:42.322Z,1513224042.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:42.673Z,1513224042.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:42.687Z,1513224042.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:43.064Z,1513224043.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:43.090Z,1513224043.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:43.459Z,1513224043.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:43.494Z,1513224043.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:43.863Z,1513224043.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:43.902Z,1513224043.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:44.285Z,1513224044.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:44.312Z,1513224044.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:44.681Z,1513224044.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:44.707Z,1513224044.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:45.101Z,1513224045.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:45.118Z,1513224045.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:45.474Z,1513224045.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:45.513Z,1513224045.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:45.864Z,1513224045.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:45.879Z,1513224045.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:46.269Z,1513224046.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:46.283Z,1513224046.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:46.669Z,1513224046.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:46.683Z,1513224046.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:47.120Z,1513224047.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:47.163Z,1513224047.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:47.492Z,1513224047.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:47.536Z,1513224047.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:47.884Z,1513224047.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:47.903Z,1513224047.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:48.287Z,1513224048.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:48.307Z,1513224048.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:48.676Z,1513224048.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:48.697Z,1513224048.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:49.125Z,1513224049.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:49.159Z,1513224049.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:49.464Z,1513224049.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:49.497Z,1513224049.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:49.869Z,1513224049.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:49.909Z,1513224049.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:50.256Z,1513224050.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:50.271Z,1513224050.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:50.748Z,1513224050.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:50.835Z,1513224050.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:51.073Z,1513224051.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:51.095Z,1513224051.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:51.475Z,1513224051.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:51.489Z,1513224051.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:51.869Z,1513224051.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:51.884Z,1513224051.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:52.267Z,1513224052.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:52.282Z,1513224052.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:52.670Z,1513224052.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:52.686Z,1513224052.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:53.064Z,1513224053.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:53.099Z,1513224053.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:53.467Z,1513224053.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:53.503Z,1513224053.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:53.881Z,1513224053.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:53.909Z,1513224053.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:54.281Z,1513224054.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:54.308Z,1513224054.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:54.682Z,1513224054.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:54.800Z,1513224054.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:55.060Z,1513224055.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:55.074Z,1513224055.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:55.462Z,1513224055.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:55.476Z,1513224055.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:55.866Z,1513224055.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:55.880Z,1513224055.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:56.264Z,1513224056.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:56.279Z,1513224056.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:56.677Z,1513224056.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:56.732Z,1513224056.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:57.090Z,1513224057.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:57.136Z,1513224057.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:57.487Z,1513224057.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:57.507Z,1513224057.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:57.863Z,1513224057.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:57.895Z,1513224057.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:58.261Z,1513224058.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:58.295Z,1513224058.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:58.660Z,1513224058.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:58.692Z,1513224058.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:59.060Z,1513224059.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:59.092Z,1513224059.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:59.459Z,1513224059.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:59.495Z,1513224059.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:00:59.874Z,1513224059.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:00:59.901Z,1513224059.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:00.300Z,1513224060.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:00.337Z,1513224060.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:00.682Z,1513224060.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:00.711Z,1513224060.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:01.129Z,1513224061.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:01.156Z,1513224061.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:01.468Z,1513224061.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:01.484Z,1513224061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:01.867Z,1513224061.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:01.882Z,1513224061.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:02.262Z,1513224062.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:02.294Z,1513224062.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:02.674Z,1513224062.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:02.748Z,1513224062.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:03.119Z,1513224063.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:03.150Z,1513224063.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:03.502Z,1513224063.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:03.522Z,1513224063.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:03.873Z,1513224063.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:03.927Z,1513224063.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:04.272Z,1513224064.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:04.291Z,1513224064.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:04.669Z,1513224064.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:04.775Z,1513224064.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:05.068Z,1513224065.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:05.094Z,1513224065.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:05.460Z,1513224065.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:05.495Z,1513224065.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:05.882Z,1513224065.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:05.901Z,1513224065.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:06.286Z,1513224066.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:06.301Z,1513224066.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:06.683Z,1513224066.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:06.771Z,1513224066.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:07.068Z,1513224067.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:07.082Z,1513224067.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:07.467Z,1513224067.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:07.487Z,1513224067.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:07.870Z,1513224067.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:07.885Z,1513224067.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:08.265Z,1513224068.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:08.281Z,1513224068.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:08.674Z,1513224068.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:08.688Z,1513224068.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:09.085Z,1513224069.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:09.099Z,1513224069.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:09.483Z,1513224069.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:09.497Z,1513224069.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:09.860Z,1513224069.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:09.887Z,1513224069.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:10.260Z,1513224070.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:10.295Z,1513224070.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:10.663Z,1513224070.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:10.696Z,1513224070.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:11.072Z,1513224071.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:11.103Z,1513224071.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:11.468Z,1513224071.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:11.499Z,1513224071.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:11.877Z,1513224071.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:11.902Z,1513224071.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:12.282Z,1513224072.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:12.311Z,1513224072.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:12.682Z,1513224072.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:12.711Z,1513224072.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:13.127Z,1513224073.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:13.179Z,1513224073.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:13.466Z,1513224073.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:13.481Z,1513224073.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:13.870Z,1513224073.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:13.885Z,1513224073.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:14.260Z,1513224074.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:14.304Z,1513224074.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:14.307Z,1513224074.307 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:01:14.308Z,1513224074.308 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:01:14.308Z,1513224074.308 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:01:14.308Z,1513224074.308 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:01:14.674Z,1513224074.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:14.711Z,1513224074.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:14.718Z,1513224074.718 [Default:CheckIn:D] Stopped
2017-12-14T04:01:14.719Z,1513224074.719 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:01:15.148Z,1513224075.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:15.175Z,1513224075.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:15.184Z,1513224075.184 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.988802 min 
2017-12-14T04:01:15.184Z,1513224075.184 [Default:CheckIn:E] Stopped
2017-12-14T04:01:15.184Z,1513224075.184 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:01:15.184Z,1513224075.184 [Default:CheckIn] Stopped
2017-12-14T04:01:15.189Z,1513224075.189 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:01:15.189Z,1513224075.189 [Default:CheckIn](INFO): Running loop #21
2017-12-14T04:01:15.189Z,1513224075.189 [Default:CheckIn] Running Loop=21
2017-12-14T04:01:15.189Z,1513224075.189 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:01:15.189Z,1513224075.189 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:01:19.840Z,1513224079.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:19.867Z,1513224079.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:19.000Z,1513224080.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:20.043Z,1513224080.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:20.366Z,1513224080.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:20.442Z,1513224080.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:20.801Z,1513224080.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:20.898Z,1513224080.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:21.170Z,1513224081.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:21.223Z,1513224081.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:21.607Z,1513224081.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:21.647Z,1513224081.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:22.008Z,1513224082.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:22.036Z,1513224082.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:22.403Z,1513224082.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:22.436Z,1513224082.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:22.833Z,1513224082.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:22.907Z,1513224082.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:23.186Z,1513224083.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:23.237Z,1513224083.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:23.588Z,1513224083.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:23.632Z,1513224083.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:23.988Z,1513224083.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:24.003Z,1513224084.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:24.395Z,1513224084.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:24.438Z,1513224084.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:24.797Z,1513224084.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:24.882Z,1513224084.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:25.167Z,1513224085.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:25.255Z,1513224085.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:25.617Z,1513224085.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:25.643Z,1513224085.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:25.986Z,1513224085.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:26.007Z,1513224086.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:26.401Z,1513224086.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:26.439Z,1513224086.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:26.799Z,1513224086.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:26.870Z,1513224086.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:27.177Z,1513224087.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:27.227Z,1513224087.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:27.590Z,1513224087.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:27.623Z,1513224087.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:27.981Z,1513224087.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:27.995Z,1513224087.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:28.418Z,1513224088.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:28.434Z,1513224088.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:28.777Z,1513224088.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:28.791Z,1513224088.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:29.195Z,1513224089.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:29.222Z,1513224089.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:29.621Z,1513224089.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:29.673Z,1513224089.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:29.984Z,1513224089.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:30.020Z,1513224090.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:30.383Z,1513224090.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:30.412Z,1513224090.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:30.770Z,1513224090.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:30.813Z,1513224090.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:31.182Z,1513224091.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:31.229Z,1513224091.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:31.584Z,1513224091.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:31.628Z,1513224091.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:31.983Z,1513224091.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:32.020Z,1513224092.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:32.391Z,1513224092.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:32.448Z,1513224092.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:32.795Z,1513224092.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:32.887Z,1513224092.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:33.180Z,1513224093.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:33.199Z,1513224093.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:33.592Z,1513224093.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:33.611Z,1513224093.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:33.990Z,1513224093.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:34.019Z,1513224094.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:34.394Z,1513224094.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:34.419Z,1513224094.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:34.832Z,1513224094.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:34.922Z,1513224094.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:35.168Z,1513224095.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:35.239Z,1513224095.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:35.591Z,1513224095.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:35.653Z,1513224095.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:35.992Z,1513224095.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:36.033Z,1513224096.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:36.396Z,1513224096.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:36.446Z,1513224096.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:36.793Z,1513224096.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:36.828Z,1513224096.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:37.196Z,1513224097.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:37.237Z,1513224097.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:37.589Z,1513224097.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:37.655Z,1513224097.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:37.987Z,1513224097.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:38.006Z,1513224098.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:38.389Z,1513224098.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:38.442Z,1513224098.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:38.785Z,1513224098.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:38.876Z,1513224098.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:39.191Z,1513224099.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:39.232Z,1513224099.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:39.587Z,1513224099.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:39.603Z,1513224099.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:39.986Z,1513224099.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:40.000Z,1513224100.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:40.386Z,1513224100.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:40.403Z,1513224100.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:40.801Z,1513224100.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:40.860Z,1513224100.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:41.161Z,1513224101.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:41.184Z,1513224101.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:41.588Z,1513224101.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:41.603Z,1513224101.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:41.984Z,1513224101.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:42.003Z,1513224102.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:42.389Z,1513224102.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:42.438Z,1513224102.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:42.777Z,1513224102.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:42.800Z,1513224102.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:43.184Z,1513224103.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:43.203Z,1513224103.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:43.605Z,1513224103.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:43.637Z,1513224103.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:43.989Z,1513224103.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:44.004Z,1513224104.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:44.388Z,1513224104.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:44.402Z,1513224104.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:44.777Z,1513224104.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:44.795Z,1513224104.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:45.169Z,1513224105.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:45.202Z,1513224105.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:45.578Z,1513224105.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:45.593Z,1513224105.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:45.978Z,1513224105.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:45.993Z,1513224105.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:46.378Z,1513224106.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:46.393Z,1513224106.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:46.790Z,1513224106.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:46.804Z,1513224106.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:47.165Z,1513224107.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:47.180Z,1513224107.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:47.565Z,1513224107.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:47.627Z,1513224107.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:47.993Z,1513224107.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:48.012Z,1513224108.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:48.365Z,1513224108.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:48.379Z,1513224108.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:48.789Z,1513224108.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:48.899Z,1513224108.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:49.177Z,1513224109.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:49.192Z,1513224109.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:49.579Z,1513224109.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:49.627Z,1513224109.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:49.965Z,1513224109.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:49.980Z,1513224109.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:50.365Z,1513224110.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:50.380Z,1513224110.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:50.808Z,1513224110.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:50.826Z,1513224110.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:51.165Z,1513224111.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:51.180Z,1513224111.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:51.577Z,1513224111.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:51.592Z,1513224111.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:51.978Z,1513224111.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:51.992Z,1513224111.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:52.379Z,1513224112.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:52.393Z,1513224112.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:52.780Z,1513224112.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:52.796Z,1513224112.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:53.165Z,1513224113.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:53.180Z,1513224113.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:53.578Z,1513224113.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:53.592Z,1513224113.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:53.978Z,1513224113.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:53.999Z,1513224113.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:54.410Z,1513224114.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:54.424Z,1513224114.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:54.782Z,1513224114.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:54.822Z,1513224114.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:55.165Z,1513224115.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:55.180Z,1513224115.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:55.573Z,1513224115.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:55.588Z,1513224115.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:55.978Z,1513224115.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:55.999Z,1513224115.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:56.378Z,1513224116.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:56.393Z,1513224116.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:56.767Z,1513224116.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:56.782Z,1513224116.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:57.166Z,1513224117.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:57.182Z,1513224117.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:57.578Z,1513224117.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:57.600Z,1513224117.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:57.979Z,1513224117.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:58.020Z,1513224118.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:58.378Z,1513224118.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:58.393Z,1513224118.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:58.766Z,1513224118.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:58.782Z,1513224118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:59.166Z,1513224119.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:59.182Z,1513224119.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:59.578Z,1513224119.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:59.599Z,1513224119.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:01:59.978Z,1513224119.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:01:59.994Z,1513224119.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:00.377Z,1513224120.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:00.392Z,1513224120.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:00.783Z,1513224120.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:00.800Z,1513224120.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:01.165Z,1513224121.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:01.180Z,1513224121.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:01.573Z,1513224121.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:01.588Z,1513224121.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:01.970Z,1513224121.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:01.985Z,1513224121.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:02.386Z,1513224122.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:02.414Z,1513224122.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:02.782Z,1513224122.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:02.798Z,1513224122.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:03.164Z,1513224123.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:03.178Z,1513224123.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:03.577Z,1513224123.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:03.592Z,1513224123.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:03.977Z,1513224123.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:03.992Z,1513224123.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:04.374Z,1513224124.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:04.388Z,1513224124.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:04.780Z,1513224124.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:04.795Z,1513224124.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:05.163Z,1513224125.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:05.178Z,1513224125.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:05.578Z,1513224125.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:05.592Z,1513224125.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:06.002Z,1513224126.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:06.050Z,1513224126.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:06.382Z,1513224126.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:06.419Z,1513224126.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:06.790Z,1513224126.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:06.830Z,1513224126.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:07.168Z,1513224127.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:07.188Z,1513224127.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:07.583Z,1513224127.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:07.611Z,1513224127.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:07.982Z,1513224127.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:08.014Z,1513224128.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:08.378Z,1513224128.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:08.403Z,1513224128.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:08.781Z,1513224128.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:08.870Z,1513224128.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:09.223Z,1513224129.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:09.238Z,1513224129.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:09.567Z,1513224129.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:09.595Z,1513224129.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:09.990Z,1513224129.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:10.043Z,1513224130.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:10.382Z,1513224130.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:10.431Z,1513224130.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:10.778Z,1513224130.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:10.803Z,1513224130.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:11.163Z,1513224131.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:11.203Z,1513224131.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:11.565Z,1513224131.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:11.600Z,1513224131.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:11.968Z,1513224131.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:12.039Z,1513224132.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:12.363Z,1513224132.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:12.431Z,1513224132.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:12.778Z,1513224132.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:12.827Z,1513224132.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:13.181Z,1513224133.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:13.196Z,1513224133.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:13.578Z,1513224133.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:13.592Z,1513224133.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:13.971Z,1513224133.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:13.998Z,1513224133.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:14.370Z,1513224134.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:14.392Z,1513224134.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:14.802Z,1513224134.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:14.825Z,1513224134.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:15.173Z,1513224135.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:15.199Z,1513224135.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:18.789Z,1513224138.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:18.859Z,1513224138.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:18.996Z,1513224138.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:19.016Z,1513224139.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:19.352Z,1513224139.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:19.371Z,1513224139.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:19.746Z,1513224139.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:19.760Z,1513224139.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:20.140Z,1513224140.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:20.195Z,1513224140.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:20.543Z,1513224140.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:20.562Z,1513224140.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:20.966Z,1513224140.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:20.997Z,1513224140.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:21.353Z,1513224141.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:21.369Z,1513224141.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:21.752Z,1513224141.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:21.770Z,1513224141.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:22.147Z,1513224142.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:22.175Z,1513224142.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:22.543Z,1513224142.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:22.558Z,1513224142.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:22.946Z,1513224142.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:22.967Z,1513224142.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:23.344Z,1513224143.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:23.359Z,1513224143.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:23.750Z,1513224143.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:23.778Z,1513224143.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:24.156Z,1513224144.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:24.175Z,1513224144.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:24.558Z,1513224144.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:24.573Z,1513224144.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:24.942Z,1513224144.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:24.969Z,1513224144.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:25.338Z,1513224145.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:25.368Z,1513224145.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:25.735Z,1513224145.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:25.774Z,1513224145.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:26.133Z,1513224146.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:26.171Z,1513224146.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:26.535Z,1513224146.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:26.570Z,1513224146.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:26.959Z,1513224146.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:26.973Z,1513224146.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:27.358Z,1513224147.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:27.379Z,1513224147.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:27.760Z,1513224147.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:27.782Z,1513224147.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:28.139Z,1513224148.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:28.172Z,1513224148.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:28.537Z,1513224148.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:28.576Z,1513224148.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:28.940Z,1513224148.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:28.967Z,1513224148.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:29.342Z,1513224149.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:29.363Z,1513224149.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:29.757Z,1513224149.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:29.789Z,1513224149.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:30.149Z,1513224150.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:30.164Z,1513224150.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:30.550Z,1513224150.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:30.565Z,1513224150.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:30.945Z,1513224150.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:30.960Z,1513224150.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:31.339Z,1513224151.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:31.367Z,1513224151.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:31.764Z,1513224151.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:31.804Z,1513224151.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:32.143Z,1513224152.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:32.163Z,1513224152.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:32.544Z,1513224152.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:32.615Z,1513224152.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:32.945Z,1513224152.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:32.982Z,1513224152.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:33.350Z,1513224153.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:33.414Z,1513224153.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:33.751Z,1513224153.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:33.787Z,1513224153.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:34.139Z,1513224154.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:34.179Z,1513224154.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:34.539Z,1513224154.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:34.577Z,1513224154.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:34.972Z,1513224154.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:34.992Z,1513224154.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:35.351Z,1513224155.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:35.379Z,1513224155.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:35.753Z,1513224155.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:35.780Z,1513224155.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:36.168Z,1513224156.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:36.182Z,1513224156.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:36.550Z,1513224156.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:36.579Z,1513224156.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:36.941Z,1513224156.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:36.973Z,1513224156.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:37.342Z,1513224157.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:37.357Z,1513224157.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:37.744Z,1513224157.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:37.759Z,1513224157.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:38.152Z,1513224158.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:38.186Z,1513224158.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:38.545Z,1513224158.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:38.560Z,1513224158.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:38.957Z,1513224158.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:38.983Z,1513224158.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:39.349Z,1513224159.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:39.364Z,1513224159.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:39.750Z,1513224159.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:39.764Z,1513224159.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:40.146Z,1513224160.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:40.160Z,1513224160.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:40.539Z,1513224160.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:40.570Z,1513224160.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:40.948Z,1513224160.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:40.968Z,1513224160.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:41.395Z,1513224161.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:41.423Z,1513224161.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:41.750Z,1513224161.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:41.771Z,1513224161.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:42.150Z,1513224162.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:42.171Z,1513224162.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:42.552Z,1513224162.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:42.606Z,1513224162.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:42.947Z,1513224162.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:42.963Z,1513224162.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:43.339Z,1513224163.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:43.360Z,1513224163.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:43.746Z,1513224163.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:43.763Z,1513224163.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:44.148Z,1513224164.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:44.164Z,1513224164.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:44.570Z,1513224164.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:44.605Z,1513224164.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:44.955Z,1513224164.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:44.971Z,1513224164.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:45.355Z,1513224165.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:45.376Z,1513224165.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:45.752Z,1513224165.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:45.768Z,1513224165.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:46.148Z,1513224166.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:46.163Z,1513224166.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:46.539Z,1513224166.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:46.559Z,1513224166.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:46.958Z,1513224166.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:46.979Z,1513224166.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:47.353Z,1513224167.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:47.375Z,1513224167.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:47.758Z,1513224167.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:47.774Z,1513224167.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:48.150Z,1513224168.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:48.171Z,1513224168.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:48.565Z,1513224168.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:48.587Z,1513224168.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:48.943Z,1513224168.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:48.962Z,1513224168.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:49.349Z,1513224169.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:49.364Z,1513224169.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:49.745Z,1513224169.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:49.760Z,1513224169.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:50.149Z,1513224170.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:50.164Z,1513224170.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:50.543Z,1513224170.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:50.563Z,1513224170.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:50.993Z,1513224170.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:51.041Z,1513224171.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:51.353Z,1513224171.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:51.375Z,1513224171.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:51.757Z,1513224171.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:51.774Z,1513224171.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:52.144Z,1513224172.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:52.159Z,1513224172.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:52.543Z,1513224172.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:52.563Z,1513224172.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:52.956Z,1513224172.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:52.000Z,1513224173.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:53.335Z,1513224173.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:53.366Z,1513224173.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:53.763Z,1513224173.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:53.778Z,1513224173.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:54.179Z,1513224174.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:54.207Z,1513224174.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:54.548Z,1513224174.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:54.633Z,1513224174.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:54.937Z,1513224174.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:54.952Z,1513224174.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:55.341Z,1513224175.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:55.387Z,1513224175.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:55.740Z,1513224175.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:55.754Z,1513224175.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:56.136Z,1513224176.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:56.190Z,1513224176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:56.539Z,1513224176.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:56.555Z,1513224176.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:56.972Z,1513224176.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:56.987Z,1513224176.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:57.370Z,1513224177.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:57.398Z,1513224177.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:57.756Z,1513224177.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:57.789Z,1513224177.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:58.144Z,1513224178.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:58.159Z,1513224178.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:58.539Z,1513224178.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:58.559Z,1513224178.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:58.935Z,1513224178.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:58.971Z,1513224178.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:59.336Z,1513224179.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:59.371Z,1513224179.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:02:59.758Z,1513224179.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:02:59.772Z,1513224179.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:00.158Z,1513224180.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:00.172Z,1513224180.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:00.577Z,1513224180.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:00.610Z,1513224180.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:00.936Z,1513224180.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:00.962Z,1513224180.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:01.335Z,1513224181.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:01.371Z,1513224181.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:01.732Z,1513224181.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:01.768Z,1513224181.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:02.130Z,1513224182.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:02.144Z,1513224182.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:02.539Z,1513224182.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:02.570Z,1513224182.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:02.967Z,1513224182.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:02.981Z,1513224182.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:03.354Z,1513224183.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:03.385Z,1513224183.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:03.748Z,1513224183.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:03.773Z,1513224183.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:04.151Z,1513224184.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:04.189Z,1513224184.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:04.539Z,1513224184.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:04.592Z,1513224184.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:04.945Z,1513224184.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:04.959Z,1513224184.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:05.341Z,1513224185.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:05.356Z,1513224185.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:05.356Z,1513224185.356 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2017-12-14T04:03:05.356Z,1513224185.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:03:05.358Z,1513224185.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:05.358Z,1513224185.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2017-12-14T04:03:05.358Z,1513224185.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:03:05.360Z,1513224185.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:05.360Z,1513224185.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2017-12-14T04:03:05.360Z,1513224185.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:03:05.388Z,1513224185.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:03:05.388Z,1513224185.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:03:05.393Z,1513224185.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:03:05.751Z,1513224185.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:05.796Z,1513224185.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:03:05.796Z,1513224185.796 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2017-12-14T04:03:05.801Z,1513224185.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:03:05.801Z,1513224185.801 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2017-12-14T04:03:05.801Z,1513224185.801 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:03:05.801Z,1513224185.801 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2017-12-14T04:03:06.149Z,1513224186.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:06.163Z,1513224186.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:03:06.163Z,1513224186.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:03:06.164Z,1513224186.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:03:06.164Z,1513224186.164 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:03:06.165Z,1513224186.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:03:06.165Z,1513224186.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:03:06.165Z,1513224186.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:03:06.166Z,1513224186.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:03:06.166Z,1513224186.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:03:06.567Z,1513224186.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:06.624Z,1513224186.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:06.961Z,1513224186.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:07.000Z,1513224187.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:07.335Z,1513224187.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:07.371Z,1513224187.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:07.736Z,1513224187.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:07.774Z,1513224187.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:08.130Z,1513224188.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:08.146Z,1513224188.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:08.534Z,1513224188.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:08.550Z,1513224188.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:08.945Z,1513224188.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:08.983Z,1513224188.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:09.349Z,1513224189.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:09.378Z,1513224189.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:09.744Z,1513224189.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:09.777Z,1513224189.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:10.140Z,1513224190.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:10.154Z,1513224190.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:10.540Z,1513224190.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:10.570Z,1513224190.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:10.943Z,1513224190.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:11.024Z,1513224191.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:11.345Z,1513224191.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:11.360Z,1513224191.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:11.754Z,1513224191.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:11.769Z,1513224191.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:12.157Z,1513224192.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:12.172Z,1513224192.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:12.554Z,1513224192.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:12.575Z,1513224192.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:12.952Z,1513224192.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:12.968Z,1513224192.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:13.376Z,1513224193.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:13.416Z,1513224193.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:13.735Z,1513224193.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:13.771Z,1513224193.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:14.140Z,1513224194.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:14.171Z,1513224194.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:14.536Z,1513224194.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:14.571Z,1513224194.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:14.963Z,1513224194.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:14.983Z,1513224194.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:15.358Z,1513224195.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:15.377Z,1513224195.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:18.741Z,1513224198.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:18.880Z,1513224198.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:18.996Z,1513224198.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:19.012Z,1513224199.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:19.352Z,1513224199.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:19.403Z,1513224199.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:19.759Z,1513224199.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:19.803Z,1513224199.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:20.153Z,1513224200.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:20.201Z,1513224200.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:20.551Z,1513224200.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:20.566Z,1513224200.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:20.962Z,1513224200.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:20.976Z,1513224200.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:21.365Z,1513224201.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:21.380Z,1513224201.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:21.766Z,1513224201.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:21.780Z,1513224201.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:22.157Z,1513224202.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:22.172Z,1513224202.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:22.558Z,1513224202.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:22.572Z,1513224202.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:22.963Z,1513224202.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:22.987Z,1513224202.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:23.375Z,1513224203.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:23.399Z,1513224203.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:23.768Z,1513224203.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:23.784Z,1513224203.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:24.166Z,1513224204.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:24.181Z,1513224204.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:24.557Z,1513224204.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:24.591Z,1513224204.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:24.951Z,1513224204.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:24.995Z,1513224204.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:25.355Z,1513224205.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:25.388Z,1513224205.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:25.750Z,1513224205.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:25.780Z,1513224205.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:26.148Z,1513224206.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:26.175Z,1513224206.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:26.553Z,1513224206.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:26.575Z,1513224206.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:26.959Z,1513224206.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:26.974Z,1513224206.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:27.359Z,1513224207.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:27.374Z,1513224207.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:27.758Z,1513224207.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:27.774Z,1513224207.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:28.146Z,1513224208.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:28.161Z,1513224208.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:28.553Z,1513224208.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:28.606Z,1513224208.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:28.952Z,1513224208.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:28.971Z,1513224208.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:29.393Z,1513224209.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:29.421Z,1513224209.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:29.759Z,1513224209.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:29.799Z,1513224209.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:30.160Z,1513224210.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:30.176Z,1513224210.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:30.561Z,1513224210.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:30.576Z,1513224210.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:30.952Z,1513224210.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:30.971Z,1513224210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:31.347Z,1513224211.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:31.369Z,1513224211.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:31.756Z,1513224211.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:31.770Z,1513224211.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:32.154Z,1513224212.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:32.169Z,1513224212.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:32.559Z,1513224212.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:32.611Z,1513224212.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:32.961Z,1513224212.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:32.976Z,1513224212.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:33.373Z,1513224213.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:33.388Z,1513224213.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:33.766Z,1513224213.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:33.781Z,1513224213.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:34.141Z,1513224214.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:34.168Z,1513224214.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:34.544Z,1513224214.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:34.579Z,1513224214.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:34.943Z,1513224214.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:34.975Z,1513224214.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:35.343Z,1513224215.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:35.379Z,1513224215.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:35.800Z,1513224215.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:35.838Z,1513224215.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:36.166Z,1513224216.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:36.187Z,1513224216.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:36.571Z,1513224216.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:36.586Z,1513224216.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:36.948Z,1513224216.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:36.979Z,1513224216.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:37.343Z,1513224217.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:37.379Z,1513224217.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:37.747Z,1513224217.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:37.777Z,1513224217.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:38.148Z,1513224218.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:38.183Z,1513224218.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:38.549Z,1513224218.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:38.563Z,1513224218.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:39.003Z,1513224219.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:39.043Z,1513224219.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:39.361Z,1513224219.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:39.392Z,1513224219.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:39.758Z,1513224219.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:39.772Z,1513224219.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:40.149Z,1513224220.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:40.163Z,1513224220.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:40.553Z,1513224220.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:40.624Z,1513224220.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:40.954Z,1513224220.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:40.968Z,1513224220.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:41.353Z,1513224221.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:41.367Z,1513224221.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:41.767Z,1513224221.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:41.819Z,1513224221.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:42.175Z,1513224222.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:42.226Z,1513224222.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:42.557Z,1513224222.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:42.604Z,1513224222.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:42.947Z,1513224222.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:42.982Z,1513224222.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:43.351Z,1513224223.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:43.367Z,1513224223.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:43.751Z,1513224223.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:43.775Z,1513224223.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:44.156Z,1513224224.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:44.175Z,1513224224.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:44.556Z,1513224224.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:44.570Z,1513224224.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:44.966Z,1513224224.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:44.987Z,1513224224.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:45.368Z,1513224225.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:45.387Z,1513224225.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:45.763Z,1513224225.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:45.777Z,1513224225.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:46.143Z,1513224226.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:46.168Z,1513224226.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:46.547Z,1513224226.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:46.572Z,1513224226.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:46.943Z,1513224226.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:46.977Z,1513224226.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:47.344Z,1513224227.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:47.385Z,1513224227.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:47.761Z,1513224227.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:47.793Z,1513224227.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:48.171Z,1513224228.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:48.185Z,1513224228.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:48.567Z,1513224228.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:48.638Z,1513224228.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:48.949Z,1513224228.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:48.964Z,1513224228.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:49.353Z,1513224229.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:49.368Z,1513224229.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:49.749Z,1513224229.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:49.771Z,1513224229.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:50.152Z,1513224230.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:50.171Z,1513224230.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:50.547Z,1513224230.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:50.563Z,1513224230.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:50.965Z,1513224230.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:51.008Z,1513224231.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:51.361Z,1513224231.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:51.376Z,1513224231.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:51.764Z,1513224231.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:51.819Z,1513224231.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:52.154Z,1513224232.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:52.175Z,1513224232.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:52.551Z,1513224232.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:52.567Z,1513224232.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:52.951Z,1513224232.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:52.971Z,1513224232.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:53.357Z,1513224233.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:53.371Z,1513224233.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:53.762Z,1513224233.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:53.776Z,1513224233.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:54.162Z,1513224234.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:54.176Z,1513224234.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:54.562Z,1513224234.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:54.576Z,1513224234.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:54.982Z,1513224234.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:55.019Z,1513224235.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:55.350Z,1513224235.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:55.370Z,1513224235.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:55.757Z,1513224235.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:55.771Z,1513224235.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:56.157Z,1513224236.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:56.171Z,1513224236.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:56.557Z,1513224236.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:56.572Z,1513224236.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:56.967Z,1513224236.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:56.987Z,1513224236.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:57.366Z,1513224237.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:57.381Z,1513224237.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:57.765Z,1513224237.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:57.781Z,1513224237.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:58.187Z,1513224238.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:58.216Z,1513224238.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:58.563Z,1513224238.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:58.578Z,1513224238.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:58.961Z,1513224238.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:58.976Z,1513224238.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:59.352Z,1513224239.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:59.372Z,1513224239.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:03:59.767Z,1513224239.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:03:59.810Z,1513224239.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:00.169Z,1513224240.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:00.185Z,1513224240.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:00.567Z,1513224240.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:00.582Z,1513224240.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:00.943Z,1513224240.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:00.971Z,1513224240.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:01.379Z,1513224241.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:01.407Z,1513224241.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:01.743Z,1513224241.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:01.778Z,1513224241.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:02.148Z,1513224242.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:02.174Z,1513224242.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:02.543Z,1513224242.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:02.576Z,1513224242.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:02.971Z,1513224242.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:03.124Z,1513224243.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:03.358Z,1513224243.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:03.372Z,1513224243.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:03.762Z,1513224243.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:03.777Z,1513224243.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:04.155Z,1513224244.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:04.198Z,1513224244.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:04.588Z,1513224244.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:04.608Z,1513224244.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:04.956Z,1513224244.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:05.011Z,1513224245.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:05.343Z,1513224245.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:05.386Z,1513224245.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:05.764Z,1513224245.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:05.779Z,1513224245.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:06.168Z,1513224246.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:06.183Z,1513224246.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:06.570Z,1513224246.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:06.584Z,1513224246.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:06.943Z,1513224246.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:06.980Z,1513224246.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:07.343Z,1513224247.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:07.379Z,1513224247.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:07.765Z,1513224247.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:07.796Z,1513224247.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:08.148Z,1513224248.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:08.171Z,1513224248.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:08.556Z,1513224248.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:08.572Z,1513224248.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:08.956Z,1513224248.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:08.973Z,1513224248.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:09.361Z,1513224249.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:09.378Z,1513224249.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:09.758Z,1513224249.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:09.772Z,1513224249.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:10.153Z,1513224250.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:10.167Z,1513224250.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:10.556Z,1513224250.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:10.575Z,1513224250.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:10.993Z,1513224250.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:11.028Z,1513224251.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:11.351Z,1513224251.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:11.371Z,1513224251.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:11.765Z,1513224251.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:11.780Z,1513224251.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:12.164Z,1513224252.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:12.179Z,1513224252.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:12.566Z,1513224252.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:12.580Z,1513224252.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:12.959Z,1513224252.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:12.979Z,1513224252.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:13.348Z,1513224253.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:13.402Z,1513224253.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:13.751Z,1513224253.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:13.777Z,1513224253.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:14.170Z,1513224254.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:14.213Z,1513224254.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:14.543Z,1513224254.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:14.568Z,1513224254.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:14.967Z,1513224254.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:14.982Z,1513224254.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:15.366Z,1513224255.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:15.381Z,1513224255.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:18.793Z,1513224258.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:18.823Z,1513224258.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:18.920Z,1513224258.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:18.935Z,1513224258.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:19.287Z,1513224259.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:19.310Z,1513224259.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:19.684Z,1513224259.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:19.722Z,1513224259.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:20.076Z,1513224260.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:20.096Z,1513224260.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:20.479Z,1513224260.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:20.507Z,1513224260.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:20.887Z,1513224260.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:20.907Z,1513224260.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:21.289Z,1513224261.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:21.307Z,1513224261.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:21.689Z,1513224261.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:21.730Z,1513224261.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:22.087Z,1513224262.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:22.102Z,1513224262.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:22.486Z,1513224262.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:22.502Z,1513224262.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:22.887Z,1513224262.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:22.906Z,1513224262.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:23.277Z,1513224263.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:23.312Z,1513224263.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:23.731Z,1513224263.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:23.759Z,1513224263.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:24.093Z,1513224264.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:24.108Z,1513224264.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:24.498Z,1513224264.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:24.519Z,1513224264.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:24.885Z,1513224264.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:24.909Z,1513224264.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:25.278Z,1513224265.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:25.351Z,1513224265.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:25.678Z,1513224265.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:25.704Z,1513224265.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:26.077Z,1513224266.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:26.112Z,1513224266.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:26.482Z,1513224266.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:26.550Z,1513224266.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:26.898Z,1513224266.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:26.954Z,1513224266.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:27.297Z,1513224267.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:27.354Z,1513224267.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:27.681Z,1513224267.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:27.741Z,1513224267.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:28.085Z,1513224268.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:28.099Z,1513224268.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:28.477Z,1513224268.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:28.500Z,1513224268.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:28.887Z,1513224268.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:28.902Z,1513224268.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:29.287Z,1513224269.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:29.307Z,1513224269.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:29.694Z,1513224269.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:29.709Z,1513224269.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:30.097Z,1513224270.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:30.155Z,1513224270.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:30.499Z,1513224270.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:30.514Z,1513224270.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:30.869Z,1513224270.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:30.906Z,1513224270.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:31.300Z,1513224271.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:31.319Z,1513224271.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:31.691Z,1513224271.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:31.705Z,1513224271.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:32.078Z,1513224272.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:32.111Z,1513224272.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:32.472Z,1513224272.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:32.509Z,1513224272.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:32.906Z,1513224272.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:32.941Z,1513224272.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:33.314Z,1513224273.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:33.347Z,1513224273.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:33.686Z,1513224273.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:33.711Z,1513224273.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:34.091Z,1513224274.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:34.107Z,1513224274.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:34.470Z,1513224274.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:34.503Z,1513224274.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:34.890Z,1513224274.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:34.905Z,1513224274.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:35.294Z,1513224275.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:35.312Z,1513224275.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:35.692Z,1513224275.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:35.737Z,1513224275.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:36.099Z,1513224276.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:36.136Z,1513224276.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:36.535Z,1513224276.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:36.584Z,1513224276.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:36.885Z,1513224276.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:36.901Z,1513224276.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:37.285Z,1513224277.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:37.312Z,1513224277.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:37.686Z,1513224277.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:37.712Z,1513224277.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:38.073Z,1513224278.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:38.100Z,1513224278.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:38.486Z,1513224278.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:38.500Z,1513224278.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:38.899Z,1513224278.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:38.914Z,1513224278.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:39.304Z,1513224279.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:39.319Z,1513224279.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:39.746Z,1513224279.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:39.768Z,1513224279.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:40.088Z,1513224280.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:40.107Z,1513224280.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:40.465Z,1513224280.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:40.509Z,1513224280.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:40.871Z,1513224280.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:40.904Z,1513224280.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:41.276Z,1513224281.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:41.302Z,1513224281.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:41.694Z,1513224281.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:41.709Z,1513224281.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:42.098Z,1513224282.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:42.123Z,1513224282.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:42.502Z,1513224282.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:42.523Z,1513224282.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:42.891Z,1513224282.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:42.946Z,1513224282.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:43.276Z,1513224283.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:43.307Z,1513224283.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:43.671Z,1513224283.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:43.718Z,1513224283.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:44.082Z,1513224284.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:44.109Z,1513224284.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:44.479Z,1513224284.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:44.511Z,1513224284.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:44.897Z,1513224284.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:44.912Z,1513224284.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:45.298Z,1513224285.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:45.325Z,1513224285.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:45.700Z,1513224285.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:45.716Z,1513224285.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:46.110Z,1513224286.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:46.135Z,1513224286.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:46.486Z,1513224286.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:46.523Z,1513224286.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:46.878Z,1513224286.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:46.918Z,1513224286.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:47.286Z,1513224287.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:47.292Z,1513224287.292 [PNI_TCM](ERROR): CRC does not match. Expected:0x23425 got:0x6977
2017-12-14T04:04:47.330Z,1513224287.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:47.695Z,1513224287.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:47.783Z,1513224287.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:48.097Z,1513224288.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:48.121Z,1513224288.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:48.491Z,1513224288.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:48.507Z,1513224288.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:48.883Z,1513224288.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:48.935Z,1513224288.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:49.326Z,1513224289.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:49.353Z,1513224289.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:49.693Z,1513224289.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:49.743Z,1513224289.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:50.078Z,1513224290.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:50.125Z,1513224290.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:50.488Z,1513224290.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:50.495Z,1513224290.495 [PNI_TCM](ERROR): CRC does not match. Expected:0x10093 got:0x0
2017-12-14T04:04:50.528Z,1513224290.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:50.895Z,1513224290.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:50.930Z,1513224290.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:51.290Z,1513224291.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:51.311Z,1513224291.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:51.694Z,1513224291.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:51.732Z,1513224291.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:52.089Z,1513224292.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:52.104Z,1513224292.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:52.519Z,1513224292.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:52.575Z,1513224292.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:52.879Z,1513224292.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:52.893Z,1513224292.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:53.275Z,1513224293.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:53.307Z,1513224293.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:53.688Z,1513224293.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:53.715Z,1513224293.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:54.097Z,1513224294.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:54.111Z,1513224294.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:54.498Z,1513224294.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:54.513Z,1513224294.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:54.871Z,1513224294.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:54.915Z,1513224294.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:55.285Z,1513224295.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:55.292Z,1513224295.292 [PNI_TCM](ERROR): CRC does not match. Expected:0x18967 got:0x54811
2017-12-14T04:04:55.312Z,1513224295.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:55.689Z,1513224295.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:55.703Z,1513224295.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:56.076Z,1513224296.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:56.102Z,1513224296.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:56.472Z,1513224296.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:56.536Z,1513224296.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:56.907Z,1513224296.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:56.927Z,1513224296.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:57.292Z,1513224297.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:57.311Z,1513224297.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:57.697Z,1513224297.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:57.711Z,1513224297.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:58.072Z,1513224298.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:58.124Z,1513224298.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:58.468Z,1513224298.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:58.506Z,1513224298.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:58.881Z,1513224298.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:58.907Z,1513224298.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:59.277Z,1513224299.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:59.308Z,1513224299.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:04:59.711Z,1513224299.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:04:59.752Z,1513224299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:00.105Z,1513224300.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:00.119Z,1513224300.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:00.494Z,1513224300.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:00.527Z,1513224300.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:00.878Z,1513224300.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:00.894Z,1513224300.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:01.278Z,1513224301.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:01.316Z,1513224301.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:01.683Z,1513224301.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:01.690Z,1513224301.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x20184 got:0x8201
2017-12-14T04:05:01.726Z,1513224301.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:02.075Z,1513224302.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:02.175Z,1513224302.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:02.477Z,1513224302.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:02.491Z,1513224302.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:02.916Z,1513224302.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:02.931Z,1513224302.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:03.294Z,1513224303.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:03.320Z,1513224303.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:03.693Z,1513224303.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:03.717Z,1513224303.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:04.087Z,1513224304.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:04.118Z,1513224304.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:04.472Z,1513224304.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:04.519Z,1513224304.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:04.883Z,1513224304.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:04.913Z,1513224304.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:05.284Z,1513224305.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:05.319Z,1513224305.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:05.697Z,1513224305.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:05.720Z,1513224305.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:06.094Z,1513224306.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:06.147Z,1513224306.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:06.498Z,1513224306.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:06.527Z,1513224306.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:06.887Z,1513224306.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:06.902Z,1513224306.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:07.284Z,1513224307.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:07.304Z,1513224307.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:07.681Z,1513224307.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:07.704Z,1513224307.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:08.087Z,1513224308.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:08.148Z,1513224308.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:08.494Z,1513224308.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:08.509Z,1513224308.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:08.894Z,1513224308.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:08.909Z,1513224308.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:09.321Z,1513224309.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:09.340Z,1513224309.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:09.696Z,1513224309.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:09.715Z,1513224309.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:10.091Z,1513224310.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:10.150Z,1513224310.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:10.490Z,1513224310.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:10.551Z,1513224310.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:10.872Z,1513224310.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:10.911Z,1513224310.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:11.274Z,1513224311.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:11.337Z,1513224311.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:11.700Z,1513224311.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:11.719Z,1513224311.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:12.100Z,1513224312.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:12.145Z,1513224312.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:12.531Z,1513224312.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:12.563Z,1513224312.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:12.883Z,1513224312.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:12.903Z,1513224312.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:13.294Z,1513224313.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:13.329Z,1513224313.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:13.686Z,1513224313.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:13.700Z,1513224313.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:14.081Z,1513224314.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:14.105Z,1513224314.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:14.486Z,1513224314.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:14.500Z,1513224314.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:14.890Z,1513224314.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:14.917Z,1513224314.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:15.290Z,1513224315.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:15.305Z,1513224315.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:15.709Z,1513224315.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:15.775Z,1513224315.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:19.157Z,1513224319.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:19.173Z,1513224319.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:19.272Z,1513224319.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:19.294Z,1513224319.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:19.672Z,1513224319.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:19.714Z,1513224319.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:20.038Z,1513224320.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:20.068Z,1513224320.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:20.434Z,1513224320.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:20.502Z,1513224320.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:20.839Z,1513224320.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:20.868Z,1513224320.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:21.225Z,1513224321.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:21.259Z,1513224321.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:21.624Z,1513224321.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:21.640Z,1513224321.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:22.025Z,1513224322.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:22.040Z,1513224322.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:22.419Z,1513224322.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:22.435Z,1513224322.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:22.834Z,1513224322.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:22.848Z,1513224322.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:23.237Z,1513224323.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:23.269Z,1513224323.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:23.641Z,1513224323.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:23.676Z,1513224323.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:24.022Z,1513224324.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:24.042Z,1513224324.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:24.425Z,1513224324.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:24.441Z,1513224324.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:24.856Z,1513224324.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:24.891Z,1513224324.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:25.228Z,1513224325.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:25.273Z,1513224325.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:25.630Z,1513224325.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:25.645Z,1513224325.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:26.044Z,1513224326.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:26.064Z,1513224326.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:26.427Z,1513224326.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:26.456Z,1513224326.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:26.819Z,1513224326.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:26.856Z,1513224326.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:27.219Z,1513224327.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:27.246Z,1513224327.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:27.634Z,1513224327.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:27.659Z,1513224327.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:28.033Z,1513224328.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:28.080Z,1513224328.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:28.449Z,1513224328.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:28.464Z,1513224328.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:28.860Z,1513224328.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:28.911Z,1513224328.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:29.247Z,1513224329.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:29.274Z,1513224329.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:29.626Z,1513224329.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:29.663Z,1513224329.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:30.028Z,1513224330.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:30.057Z,1513224330.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:30.430Z,1513224330.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:30.452Z,1513224330.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:30.860Z,1513224330.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:30.882Z,1513224330.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:31.249Z,1513224331.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:31.271Z,1513224331.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:31.642Z,1513224331.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:31.675Z,1513224331.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:32.049Z,1513224332.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:32.107Z,1513224332.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:32.426Z,1513224332.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:32.456Z,1513224332.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:32.848Z,1513224332.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:32.869Z,1513224332.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:33.235Z,1513224333.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:33.308Z,1513224333.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:33.636Z,1513224333.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:33.658Z,1513224333.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:34.037Z,1513224334.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:34.058Z,1513224334.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:34.438Z,1513224334.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:34.470Z,1513224334.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:34.828Z,1513224334.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:34.859Z,1513224334.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:35.269Z,1513224335.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:35.319Z,1513224335.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:35.628Z,1513224335.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:35.656Z,1513224335.656 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:05:35.656Z,1513224335.656 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:05:35.656Z,1513224335.656 [BPC1](ERROR): Communications Fault
2017-12-14T04:05:35.676Z,1513224335.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:35.689Z,1513224335.689 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:05:36.026Z,1513224336.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:36.042Z,1513224336.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:36.425Z,1513224336.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:36.440Z,1513224336.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:36.860Z,1513224336.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:36.883Z,1513224336.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:36.896Z,1513224336.896 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:05:36.896Z,1513224336.896 [BPC1] No Fault, FailCount= 1
2017-12-14T04:05:37.239Z,1513224337.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:37.327Z,1513224337.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:37.642Z,1513224337.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:37.678Z,1513224337.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:38.026Z,1513224338.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:38.053Z,1513224338.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:38.458Z,1513224338.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:38.501Z,1513224338.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:38.841Z,1513224338.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:38.856Z,1513224338.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:39.223Z,1513224339.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:39.273Z,1513224339.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:39.643Z,1513224339.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:39.658Z,1513224339.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:40.045Z,1513224340.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:40.060Z,1513224340.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:40.443Z,1513224340.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:40.467Z,1513224340.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:40.820Z,1513224340.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:40.864Z,1513224340.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:41.232Z,1513224341.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:41.252Z,1513224341.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:41.650Z,1513224341.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:41.683Z,1513224341.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:42.025Z,1513224342.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:42.040Z,1513224342.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:42.426Z,1513224342.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:42.441Z,1513224342.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:42.838Z,1513224342.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:42.852Z,1513224342.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:43.235Z,1513224343.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:43.255Z,1513224343.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:43.635Z,1513224343.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:43.650Z,1513224343.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:44.032Z,1513224344.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:44.050Z,1513224344.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:44.431Z,1513224344.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:44.447Z,1513224344.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:44.829Z,1513224344.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:44.847Z,1513224344.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:45.238Z,1513224345.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:45.254Z,1513224345.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:45.639Z,1513224345.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:45.690Z,1513224345.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:46.037Z,1513224346.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:46.052Z,1513224346.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:46.438Z,1513224346.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:46.467Z,1513224346.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:46.820Z,1513224346.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:46.847Z,1513224346.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:47.220Z,1513224347.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:47.251Z,1513224347.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:47.624Z,1513224347.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:47.652Z,1513224347.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:48.022Z,1513224348.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:48.055Z,1513224348.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:48.418Z,1513224348.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:48.456Z,1513224348.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:48.844Z,1513224348.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:48.867Z,1513224348.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:49.242Z,1513224349.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:49.262Z,1513224349.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:49.629Z,1513224349.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:49.663Z,1513224349.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:50.014Z,1513224350.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:50.028Z,1513224350.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:50.420Z,1513224350.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:50.466Z,1513224350.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:50.819Z,1513224350.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:50.835Z,1513224350.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:51.251Z,1513224351.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:51.288Z,1513224351.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:51.626Z,1513224351.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:51.642Z,1513224351.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:52.037Z,1513224352.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:52.052Z,1513224352.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:52.441Z,1513224352.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:52.476Z,1513224352.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:52.852Z,1513224352.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:52.888Z,1513224352.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:53.228Z,1513224353.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:53.247Z,1513224353.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:53.628Z,1513224353.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:53.642Z,1513224353.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:54.026Z,1513224354.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:54.045Z,1513224354.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:54.450Z,1513224354.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:54.488Z,1513224354.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:54.850Z,1513224354.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:54.885Z,1513224354.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:55.235Z,1513224355.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:55.250Z,1513224355.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:55.636Z,1513224355.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:55.659Z,1513224355.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:56.031Z,1513224356.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:56.045Z,1513224356.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:56.286Z,1513224356.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:56.424Z,1513224356.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:56.447Z,1513224356.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:56.824Z,1513224356.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:56.898Z,1513224356.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:57.086Z,1513224357.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:57.219Z,1513224357.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:57.254Z,1513224357.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:57.493Z,1513224357.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:57.639Z,1513224357.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:57.707Z,1513224357.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:58.033Z,1513224358.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:58.074Z,1513224358.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:58.425Z,1513224358.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:58.475Z,1513224358.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:58.820Z,1513224358.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:58.856Z,1513224358.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:59.219Z,1513224359.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:59.255Z,1513224359.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:05:59.647Z,1513224359.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:05:59.661Z,1513224359.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:00.046Z,1513224360.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:00.069Z,1513224360.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:00.432Z,1513224360.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:00.458Z,1513224360.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:00.831Z,1513224360.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:00.899Z,1513224360.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:01.219Z,1513224361.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:01.236Z,1513224361.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:01.626Z,1513224361.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:01.640Z,1513224361.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:02.027Z,1513224362.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:02.042Z,1513224362.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:02.427Z,1513224362.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:02.463Z,1513224362.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:02.845Z,1513224362.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:02.874Z,1513224362.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:03.238Z,1513224363.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:03.270Z,1513224363.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:03.641Z,1513224363.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:03.672Z,1513224363.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:04.073Z,1513224364.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:04.093Z,1513224364.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:04.425Z,1513224364.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:04.451Z,1513224364.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:04.827Z,1513224364.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:04.843Z,1513224364.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:05.228Z,1513224365.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:05.251Z,1513224365.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:05.633Z,1513224365.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:05.648Z,1513224365.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:06.037Z,1513224366.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:06.052Z,1513224366.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:06.437Z,1513224366.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:06.451Z,1513224366.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:06.452Z,1513224366.452 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2017-12-14T04:06:06.452Z,1513224366.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:06:06.457Z,1513224366.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:06.457Z,1513224366.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2017-12-14T04:06:06.458Z,1513224366.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:06:06.462Z,1513224366.462 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:06.462Z,1513224366.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2017-12-14T04:06:06.462Z,1513224366.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:06:06.495Z,1513224366.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:06:06.495Z,1513224366.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:06:06.495Z,1513224366.495 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:06:06.851Z,1513224366.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:06.908Z,1513224366.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:06:06.908Z,1513224366.908 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2017-12-14T04:06:06.908Z,1513224366.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:06:06.908Z,1513224366.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2017-12-14T04:06:06.909Z,1513224366.909 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:06:06.909Z,1513224366.909 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2017-12-14T04:06:07.235Z,1513224367.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:07.260Z,1513224367.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:06:07.265Z,1513224367.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:06:07.265Z,1513224367.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:06:07.266Z,1513224367.266 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:06:07.266Z,1513224367.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:06:07.267Z,1513224367.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:06:07.267Z,1513224367.267 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:06:07.267Z,1513224367.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:06:07.268Z,1513224367.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:06:07.619Z,1513224367.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:07.651Z,1513224367.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:08.019Z,1513224368.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:08.050Z,1513224368.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:08.423Z,1513224368.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:08.448Z,1513224368.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:08.840Z,1513224368.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:08.859Z,1513224368.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:09.254Z,1513224369.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:09.276Z,1513224369.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:09.643Z,1513224369.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:09.664Z,1513224369.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:10.022Z,1513224370.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:10.047Z,1513224370.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:10.416Z,1513224370.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:10.443Z,1513224370.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:10.830Z,1513224370.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:10.845Z,1513224370.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:11.229Z,1513224371.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:11.244Z,1513224371.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:11.634Z,1513224371.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:11.649Z,1513224371.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:12.034Z,1513224372.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:12.049Z,1513224372.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:12.433Z,1513224372.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:12.494Z,1513224372.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:12.819Z,1513224372.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:12.845Z,1513224372.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:13.232Z,1513224373.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:13.247Z,1513224373.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:13.650Z,1513224373.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:13.699Z,1513224373.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:14.020Z,1513224374.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:14.057Z,1513224374.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:14.423Z,1513224374.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:14.467Z,1513224374.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:14.856Z,1513224374.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:14.870Z,1513224374.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:15.246Z,1513224375.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:15.267Z,1513224375.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:15.270Z,1513224375.270 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:01:15.2Z
2017-12-14T04:06:15.270Z,1513224375.270 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:06:15.270Z,1513224375.270 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:06:15.635Z,1513224375.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:15.674Z,1513224375.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:16.413Z,1513224376.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:16.428Z,1513224376.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:20.726Z,1513224380.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:20.888Z,1513224380.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:20.966Z,1513224380.966 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0084.lzma
2017-12-14T04:06:20.999Z,1513224380.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:21.030Z,1513224381.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:21.399Z,1513224381.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:21.427Z,1513224381.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:21.756Z,1513224381.756 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0084.lzma.bak
2017-12-14T04:06:21.756Z,1513224381.756 [DataOverHttps](INFO): SBD MOMSN=5437579
2017-12-14T04:06:21.816Z,1513224381.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:21.871Z,1513224381.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:24.410Z,1513224384.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:24.457Z,1513224384.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:24.549Z,1513224384.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:24.651Z,1513224384.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:29.899Z,1513224389.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:29.922Z,1513224389.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:30.090Z,1513224390.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:30.134Z,1513224390.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:30.386Z,1513224390.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:30.424Z,1513224390.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:30.830Z,1513224390.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:30.848Z,1513224390.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:31.186Z,1513224391.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:31.238Z,1513224391.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:31.582Z,1513224391.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:31.596Z,1513224391.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:38.310Z,1513224398.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.106Z,1513224399.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.256Z,1513224399.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.346Z,1513224399.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:39.422Z,1513224399.422 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0085.lzma
2017-12-14T04:06:39.458Z,1513224399.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.493Z,1513224399.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:39.514Z,1513224399.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.817Z,1513224399.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:39.865Z,1513224399.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:40.183Z,1513224400.183 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0085.lzma.bak
2017-12-14T04:06:40.183Z,1513224400.183 [DataOverHttps](INFO): SBD MOMSN=5437581
2017-12-14T04:06:40.247Z,1513224400.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:40.294Z,1513224400.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:42.200Z,1513224402.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:42.231Z,1513224402.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:42.239Z,1513224402.239 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:06:42.239Z,1513224402.239 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:06:42.239Z,1513224402.239 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:06:42.335Z,1513224402.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:42.387Z,1513224402.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:46.868Z,1513224406.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:46.952Z,1513224406.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:47.037Z,1513224407.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:47.062Z,1513224407.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:47.421Z,1513224407.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:47.446Z,1513224407.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:47.825Z,1513224407.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:47.855Z,1513224407.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:48.222Z,1513224408.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:48.247Z,1513224408.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:48.604Z,1513224408.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:48.631Z,1513224408.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:49.007Z,1513224409.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:49.027Z,1513224409.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:49.408Z,1513224409.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:49.423Z,1513224409.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:49.810Z,1513224409.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:49.825Z,1513224409.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:50.221Z,1513224410.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:50.274Z,1513224410.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:50.630Z,1513224410.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:50.654Z,1513224410.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:51.002Z,1513224411.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:51.122Z,1513224411.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:51.399Z,1513224411.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:51.424Z,1513224411.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:51.809Z,1513224411.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:51.867Z,1513224411.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:52.199Z,1513224412.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:52.230Z,1513224412.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:52.290Z,1513224412.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:52.627Z,1513224412.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:52.642Z,1513224412.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:53.024Z,1513224413.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:53.073Z,1513224413.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:53.087Z,1513224413.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:53.410Z,1513224413.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:53.448Z,1513224413.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:53.509Z,1513224413.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:53.804Z,1513224413.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:53.834Z,1513224413.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:54.197Z,1513224414.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:54.211Z,1513224414.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:54.306Z,1513224414.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:54.627Z,1513224414.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:54.642Z,1513224414.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:55.028Z,1513224415.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:55.042Z,1513224415.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:55.101Z,1513224415.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:55.418Z,1513224415.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:55.447Z,1513224415.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:55.505Z,1513224415.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:55.834Z,1513224415.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:55.891Z,1513224415.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:56.207Z,1513224416.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:56.221Z,1513224416.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:56.618Z,1513224416.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:56.632Z,1513224416.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:57.053Z,1513224417.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:57.067Z,1513224417.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:57.416Z,1513224417.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:57.439Z,1513224417.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:57.806Z,1513224417.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:57.820Z,1513224417.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:58.203Z,1513224418.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:58.227Z,1513224418.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:58.618Z,1513224418.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:58.632Z,1513224418.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:59.029Z,1513224419.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:59.052Z,1513224419.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:59.415Z,1513224419.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:59.429Z,1513224419.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:06:59.804Z,1513224419.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:06:59.818Z,1513224419.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:00.193Z,1513224420.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:00.239Z,1513224420.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:00.610Z,1513224420.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:00.624Z,1513224420.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:01.012Z,1513224421.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:01.031Z,1513224421.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:01.413Z,1513224421.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:01.428Z,1513224421.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:01.802Z,1513224421.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:01.817Z,1513224421.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:02.238Z,1513224422.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:02.282Z,1513224422.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:02.614Z,1513224422.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:02.628Z,1513224422.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:03.014Z,1513224423.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:03.041Z,1513224423.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:03.414Z,1513224423.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:03.428Z,1513224423.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:03.801Z,1513224423.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:03.823Z,1513224423.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:04.203Z,1513224424.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:04.218Z,1513224424.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:04.613Z,1513224424.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:04.628Z,1513224424.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:05.013Z,1513224425.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:05.028Z,1513224425.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:05.423Z,1513224425.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:05.451Z,1513224425.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:05.804Z,1513224425.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:05.819Z,1513224425.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:06.203Z,1513224426.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:06.218Z,1513224426.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:06.294Z,1513224426.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:06.625Z,1513224426.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:06.681Z,1513224426.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:07.013Z,1513224427.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:07.027Z,1513224427.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:07.091Z,1513224427.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:07.414Z,1513224427.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:07.428Z,1513224427.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:07.501Z,1513224427.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:07.802Z,1513224427.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:07.823Z,1513224427.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:08.203Z,1513224428.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:08.218Z,1513224428.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:08.297Z,1513224428.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:08.622Z,1513224428.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:08.643Z,1513224428.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:09.013Z,1513224429.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:09.028Z,1513224429.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:09.093Z,1513224429.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:09.413Z,1513224429.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:09.428Z,1513224429.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:09.497Z,1513224429.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:09.803Z,1513224429.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:09.823Z,1513224429.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:10.226Z,1513224430.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:10.241Z,1513224430.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:10.614Z,1513224430.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:10.647Z,1513224430.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:11.022Z,1513224431.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:11.063Z,1513224431.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:11.414Z,1513224431.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:11.428Z,1513224431.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:11.800Z,1513224431.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:11.847Z,1513224431.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:12.198Z,1513224432.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:12.213Z,1513224432.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:12.614Z,1513224432.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:12.659Z,1513224432.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:13.014Z,1513224433.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:13.035Z,1513224433.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:13.414Z,1513224433.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:13.430Z,1513224433.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:13.798Z,1513224433.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:13.813Z,1513224433.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:14.203Z,1513224434.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:14.217Z,1513224434.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:14.614Z,1513224434.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:14.657Z,1513224434.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:15.041Z,1513224435.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:15.056Z,1513224435.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:15.414Z,1513224435.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:15.430Z,1513224435.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:15.800Z,1513224435.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:15.816Z,1513224435.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:16.200Z,1513224436.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:16.220Z,1513224436.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:16.618Z,1513224436.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:16.632Z,1513224436.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:17.022Z,1513224437.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:17.038Z,1513224437.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:17.413Z,1513224437.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:17.429Z,1513224437.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:17.801Z,1513224437.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:17.816Z,1513224437.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:18.200Z,1513224438.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:18.215Z,1513224438.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:18.310Z,1513224438.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:18.613Z,1513224438.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:18.628Z,1513224438.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:19.013Z,1513224439.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:19.066Z,1513224439.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:19.106Z,1513224439.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:19.410Z,1513224439.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:19.424Z,1513224439.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:19.509Z,1513224439.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:19.803Z,1513224439.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:19.823Z,1513224439.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:20.199Z,1513224440.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:20.257Z,1513224440.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:20.305Z,1513224440.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:20.610Z,1513224440.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:20.632Z,1513224440.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:21.104Z,1513224441.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:21.111Z,1513224441.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:21.187Z,1513224441.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:21.414Z,1513224441.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:21.435Z,1513224441.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:21.529Z,1513224441.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:21.800Z,1513224441.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:21.823Z,1513224441.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:22.199Z,1513224442.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:22.239Z,1513224442.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:22.325Z,1513224442.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:22.610Z,1513224442.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:22.635Z,1513224442.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:23.014Z,1513224443.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:23.037Z,1513224443.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:23.121Z,1513224443.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:23.410Z,1513224443.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:23.456Z,1513224443.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:23.525Z,1513224443.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:23.800Z,1513224443.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:23.827Z,1513224443.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:24.199Z,1513224444.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:24.227Z,1513224444.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:24.321Z,1513224444.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:24.606Z,1513224444.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:24.650Z,1513224444.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:25.022Z,1513224445.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:25.048Z,1513224445.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:25.118Z,1513224445.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:25.426Z,1513224445.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:25.459Z,1513224445.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:25.521Z,1513224445.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:25.814Z,1513224445.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:25.846Z,1513224445.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:26.208Z,1513224446.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:26.223Z,1513224446.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:26.317Z,1513224446.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:26.614Z,1513224446.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:26.629Z,1513224446.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:27.014Z,1513224447.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:27.031Z,1513224447.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:27.113Z,1513224447.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:27.415Z,1513224447.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:27.430Z,1513224447.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:27.529Z,1513224447.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:27.809Z,1513224447.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:27.831Z,1513224447.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:28.212Z,1513224448.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:28.227Z,1513224448.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:28.325Z,1513224448.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:28.618Z,1513224448.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:28.633Z,1513224448.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:29.017Z,1513224449.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:29.032Z,1513224449.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:29.121Z,1513224449.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:29.416Z,1513224449.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:29.431Z,1513224449.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:29.525Z,1513224449.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:29.807Z,1513224449.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:29.826Z,1513224449.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:30.206Z,1513224450.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:30.226Z,1513224450.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:30.321Z,1513224450.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:30.616Z,1513224450.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:30.639Z,1513224450.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:31.029Z,1513224451.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:31.060Z,1513224451.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:31.117Z,1513224451.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:31.414Z,1513224451.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:31.433Z,1513224451.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:31.521Z,1513224451.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:31.803Z,1513224451.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:31.858Z,1513224451.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:32.212Z,1513224452.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:32.251Z,1513224452.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:32.317Z,1513224452.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:32.618Z,1513224452.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:32.732Z,1513224452.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:33.016Z,1513224453.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:33.030Z,1513224453.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:33.114Z,1513224453.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:33.422Z,1513224453.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:33.479Z,1513224453.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:33.517Z,1513224453.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:33.801Z,1513224453.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:33.838Z,1513224453.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:34.199Z,1513224454.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:34.235Z,1513224454.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:34.313Z,1513224454.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:34.617Z,1513224454.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:34.650Z,1513224454.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:35.017Z,1513224455.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:35.071Z,1513224455.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:35.109Z,1513224455.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:35.421Z,1513224455.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:35.451Z,1513224455.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:35.517Z,1513224455.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:35.808Z,1513224455.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:35.823Z,1513224455.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:36.207Z,1513224456.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:36.222Z,1513224456.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:36.314Z,1513224456.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:36.622Z,1513224456.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:36.645Z,1513224456.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:37.016Z,1513224457.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:37.031Z,1513224457.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:37.110Z,1513224457.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:37.421Z,1513224457.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:37.436Z,1513224457.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:37.514Z,1513224457.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:37.808Z,1513224457.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:37.823Z,1513224457.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:38.214Z,1513224458.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:38.228Z,1513224458.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:38.309Z,1513224458.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:38.618Z,1513224458.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:38.633Z,1513224458.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:39.020Z,1513224459.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:39.043Z,1513224459.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:39.105Z,1513224459.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:39.420Z,1513224459.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:39.439Z,1513224459.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:39.509Z,1513224459.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:39.833Z,1513224459.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:39.911Z,1513224459.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:40.239Z,1513224460.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:40.305Z,1513224460.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:40.317Z,1513224460.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:40.622Z,1513224460.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:40.643Z,1513224460.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:41.020Z,1513224461.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:41.036Z,1513224461.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:41.101Z,1513224461.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:41.417Z,1513224461.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:41.439Z,1513224461.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:41.505Z,1513224461.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:41.814Z,1513224461.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:41.829Z,1513224461.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:42.204Z,1513224462.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:42.227Z,1513224462.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:42.301Z,1513224462.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:42.616Z,1513224462.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:42.662Z,1513224462.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:43.097Z,1513224463.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:43.501Z,1513224463.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:44.297Z,1513224464.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:45.093Z,1513224465.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:45.497Z,1513224465.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.072Z,1513224466.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.096Z,1513224466.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:46.220Z,1513224466.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.235Z,1513224466.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:46.293Z,1513224466.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.552Z,1513224466.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.598Z,1513224466.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:46.958Z,1513224466.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:46.985Z,1513224466.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:47.090Z,1513224467.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:47.355Z,1513224467.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:47.370Z,1513224467.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:47.501Z,1513224467.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:47.766Z,1513224467.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:47.796Z,1513224467.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:48.169Z,1513224468.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:48.195Z,1513224468.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:48.297Z,1513224468.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:48.556Z,1513224468.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:48.575Z,1513224468.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:48.952Z,1513224468.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:48.975Z,1513224468.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:49.095Z,1513224469.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:49.358Z,1513224469.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:49.374Z,1513224469.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:49.501Z,1513224469.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:49.779Z,1513224469.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:49.808Z,1513224469.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:50.163Z,1513224470.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:50.179Z,1513224470.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:50.297Z,1513224470.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:50.566Z,1513224470.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:50.581Z,1513224470.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:50.967Z,1513224470.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:51.054Z,1513224471.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:51.094Z,1513224471.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:51.363Z,1513224471.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:51.383Z,1513224471.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:51.497Z,1513224471.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:51.757Z,1513224471.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:51.774Z,1513224471.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:52.152Z,1513224472.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:52.167Z,1513224472.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:52.293Z,1513224472.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:52.547Z,1513224472.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:52.580Z,1513224472.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:53.015Z,1513224473.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:53.076Z,1513224473.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:53.097Z,1513224473.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:53.365Z,1513224473.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:53.426Z,1513224473.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:53.502Z,1513224473.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:53.762Z,1513224473.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:53.783Z,1513224473.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:54.143Z,1513224474.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:54.187Z,1513224474.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:54.297Z,1513224474.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:54.547Z,1513224474.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:54.574Z,1513224474.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:54.943Z,1513224474.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:54.995Z,1513224474.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:55.093Z,1513224475.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:55.343Z,1513224475.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:55.379Z,1513224475.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:55.497Z,1513224475.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:55.754Z,1513224475.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:55.778Z,1513224475.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:56.172Z,1513224476.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:56.211Z,1513224476.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:56.294Z,1513224476.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:56.566Z,1513224476.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:56.587Z,1513224476.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:56.956Z,1513224476.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:56.975Z,1513224476.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:57.091Z,1513224477.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:57.363Z,1513224477.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:57.386Z,1513224477.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:57.697Z,1513224477.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:57.760Z,1513224477.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:57.779Z,1513224477.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:58.138Z,1513224478.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:58.170Z,1513224478.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:58.493Z,1513224478.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:58.543Z,1513224478.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:58.568Z,1513224478.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:58.960Z,1513224478.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:58.979Z,1513224478.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:59.193Z,1513224479.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:59.360Z,1513224479.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:59.379Z,1513224479.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:59.760Z,1513224479.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:07:59.795Z,1513224479.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:07:59.989Z,1513224479.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:00.143Z,1513224480.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:00.166Z,1513224480.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:00.543Z,1513224480.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:00.581Z,1513224480.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:00.785Z,1513224480.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:00.943Z,1513224480.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:00.980Z,1513224480.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:01.339Z,1513224481.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:01.353Z,1513224481.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:01.489Z,1513224481.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:01.754Z,1513224481.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:01.768Z,1513224481.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:02.158Z,1513224482.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:02.172Z,1513224482.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:02.285Z,1513224482.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:02.558Z,1513224482.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:02.575Z,1513224482.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:02.952Z,1513224482.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:02.971Z,1513224482.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:03.094Z,1513224483.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:03.346Z,1513224483.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:03.396Z,1513224483.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:03.502Z,1513224483.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:03.753Z,1513224483.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:03.775Z,1513224483.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:04.151Z,1513224484.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:04.166Z,1513224484.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:04.297Z,1513224484.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:04.557Z,1513224484.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:04.571Z,1513224484.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:04.958Z,1513224484.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:04.975Z,1513224484.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:05.093Z,1513224485.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:05.358Z,1513224485.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:05.374Z,1513224485.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:05.497Z,1513224485.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:05.757Z,1513224485.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:05.775Z,1513224485.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:06.156Z,1513224486.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:06.170Z,1513224486.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:06.293Z,1513224486.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:06.571Z,1513224486.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:06.603Z,1513224486.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:06.978Z,1513224486.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:07.048Z,1513224487.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:07.089Z,1513224487.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:07.347Z,1513224487.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:07.380Z,1513224487.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:07.493Z,1513224487.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:07.754Z,1513224487.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:07.787Z,1513224487.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:08.166Z,1513224488.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:08.188Z,1513224488.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:08.290Z,1513224488.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:08.566Z,1513224488.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:08.608Z,1513224488.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:08.943Z,1513224488.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:08.980Z,1513224488.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:09.085Z,1513224489.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:09.343Z,1513224489.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:09.374Z,1513224489.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:09.489Z,1513224489.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:09.747Z,1513224489.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:09.785Z,1513224489.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:10.144Z,1513224490.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:10.179Z,1513224490.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:10.286Z,1513224490.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:10.547Z,1513224490.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:10.561Z,1513224490.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:10.957Z,1513224490.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:10.983Z,1513224490.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:11.081Z,1513224491.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:11.379Z,1513224491.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:11.394Z,1513224491.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:11.485Z,1513224491.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:11.761Z,1513224491.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:11.795Z,1513224491.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:12.147Z,1513224492.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:12.162Z,1513224492.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:12.281Z,1513224492.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:12.551Z,1513224492.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:12.591Z,1513224492.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:12.954Z,1513224492.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:12.995Z,1513224492.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:13.078Z,1513224493.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:13.349Z,1513224493.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:13.364Z,1513224493.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:13.481Z,1513224493.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:13.763Z,1513224493.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:13.795Z,1513224493.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:14.131Z,1513224494.131 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T04:08:14.131Z,1513224494.131 [NAL9602] Data Fault, FailCount= 5
2017-12-14T04:08:14.131Z,1513224494.131 [NAL9602](ERROR): Data Fault
2017-12-14T04:08:14.148Z,1513224494.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:14.220Z,1513224494.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:14.244Z,1513224494.244 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T04:08:14.245Z,1513224494.245 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T04:08:14.277Z,1513224494.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:14.532Z,1513224494.532 [NAL9602](INFO): Powering down
2017-12-14T04:08:14.550Z,1513224494.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:14.565Z,1513224494.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:14.598Z,1513224494.598 [CBIT](INFO): Critical error at 20171214T040814
2017-12-14T04:08:14.951Z,1513224494.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:14.966Z,1513224494.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:15.079Z,1513224495.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:15.354Z,1513224495.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:15.369Z,1513224495.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:15.489Z,1513224495.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:15.752Z,1513224495.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:15.803Z,1513224495.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:16.185Z,1513224496.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:16.204Z,1513224496.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:16.286Z,1513224496.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:16.549Z,1513224496.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:16.600Z,1513224496.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:16.950Z,1513224496.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:16.965Z,1513224496.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:17.083Z,1513224497.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:17.351Z,1513224497.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:17.371Z,1513224497.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:17.509Z,1513224497.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:17.751Z,1513224497.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:17.765Z,1513224497.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:18.156Z,1513224498.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:18.204Z,1513224498.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:18.305Z,1513224498.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:18.547Z,1513224498.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:18.563Z,1513224498.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:18.949Z,1513224498.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:18.971Z,1513224498.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:19.101Z,1513224499.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:19.363Z,1513224499.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:19.382Z,1513224499.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:19.505Z,1513224499.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:19.742Z,1513224499.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:19.779Z,1513224499.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:20.146Z,1513224500.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:20.160Z,1513224500.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:20.301Z,1513224500.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:20.548Z,1513224500.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:20.562Z,1513224500.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:20.948Z,1513224500.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:20.963Z,1513224500.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:21.097Z,1513224501.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:21.353Z,1513224501.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:21.367Z,1513224501.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:21.501Z,1513224501.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:21.750Z,1513224501.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:21.764Z,1513224501.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:22.149Z,1513224502.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:22.164Z,1513224502.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:22.297Z,1513224502.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:22.609Z,1513224502.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:22.662Z,1513224502.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:22.954Z,1513224502.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:22.969Z,1513224502.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:23.093Z,1513224503.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:23.351Z,1513224503.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:23.366Z,1513224503.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:23.497Z,1513224503.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:23.752Z,1513224503.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:23.766Z,1513224503.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:24.156Z,1513224504.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:24.171Z,1513224504.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:24.293Z,1513224504.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:24.555Z,1513224504.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:24.570Z,1513224504.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:24.951Z,1513224504.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:25.005Z,1513224505.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:25.089Z,1513224505.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:25.346Z,1513224505.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:25.380Z,1513224505.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:25.493Z,1513224505.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:25.754Z,1513224505.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:25.769Z,1513224505.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:26.152Z,1513224506.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:26.171Z,1513224506.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:26.291Z,1513224506.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:26.562Z,1513224506.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:26.576Z,1513224506.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:26.953Z,1513224506.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:26.969Z,1513224506.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:27.085Z,1513224507.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:27.362Z,1513224507.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:27.378Z,1513224507.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:27.492Z,1513224507.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:27.755Z,1513224507.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:27.775Z,1513224507.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:28.156Z,1513224508.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:28.171Z,1513224508.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:28.285Z,1513224508.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:28.553Z,1513224508.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:28.575Z,1513224508.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:28.979Z,1513224508.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:29.015Z,1513224509.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:29.084Z,1513224509.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:29.351Z,1513224509.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:29.366Z,1513224509.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:29.513Z,1513224509.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:29.753Z,1513224509.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:29.768Z,1513224509.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:30.150Z,1513224510.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:30.165Z,1513224510.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:30.309Z,1513224510.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:30.555Z,1513224510.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:30.570Z,1513224510.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:30.952Z,1513224510.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:30.967Z,1513224510.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:31.107Z,1513224511.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:31.350Z,1513224511.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:31.371Z,1513224511.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:31.513Z,1513224511.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:31.772Z,1513224511.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:31.906Z,1513224511.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:32.153Z,1513224512.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:32.168Z,1513224512.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:32.309Z,1513224512.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:32.560Z,1513224512.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:32.576Z,1513224512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:32.948Z,1513224512.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:32.979Z,1513224512.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:33.105Z,1513224513.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:33.351Z,1513224513.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:33.366Z,1513224513.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:33.509Z,1513224513.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:33.757Z,1513224513.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:33.771Z,1513224513.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:34.149Z,1513224514.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:34.165Z,1513224514.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:34.305Z,1513224514.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:34.554Z,1513224514.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:34.568Z,1513224514.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:34.950Z,1513224514.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:34.971Z,1513224514.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:35.102Z,1513224515.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:35.344Z,1513224515.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:35.379Z,1513224515.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:35.505Z,1513224515.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:35.755Z,1513224515.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:35.787Z,1513224515.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:36.148Z,1513224516.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:36.181Z,1513224516.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:36.301Z,1513224516.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:36.587Z,1513224516.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:36.631Z,1513224516.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:36.948Z,1513224516.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:36.984Z,1513224516.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:37.097Z,1513224517.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:37.342Z,1513224517.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:37.412Z,1513224517.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:37.501Z,1513224517.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:37.748Z,1513224517.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:37.763Z,1513224517.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:38.150Z,1513224518.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:38.188Z,1513224518.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:38.297Z,1513224518.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:38.551Z,1513224518.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:38.565Z,1513224518.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:38.948Z,1513224518.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:39.039Z,1513224519.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:39.094Z,1513224519.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:39.352Z,1513224519.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:39.367Z,1513224519.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:39.497Z,1513224519.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:39.752Z,1513224519.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:39.766Z,1513224519.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:40.148Z,1513224520.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:40.163Z,1513224520.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:40.293Z,1513224520.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:40.547Z,1513224520.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:40.577Z,1513224520.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:40.949Z,1513224520.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:40.964Z,1513224520.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:41.089Z,1513224521.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:41.348Z,1513224521.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:41.366Z,1513224521.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:41.493Z,1513224521.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:41.752Z,1513224521.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:41.803Z,1513224521.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:42.179Z,1513224522.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:42.197Z,1513224522.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:42.290Z,1513224522.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:42.550Z,1513224522.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:42.571Z,1513224522.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:42.951Z,1513224522.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:42.966Z,1513224522.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:43.089Z,1513224523.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:43.505Z,1513224523.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:44.301Z,1513224524.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:45.099Z,1513224525.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:45.505Z,1513224525.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:46.301Z,1513224526.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:46.347Z,1513224526.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:46.361Z,1513224526.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:46.465Z,1513224526.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:46.480Z,1513224526.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:46.815Z,1513224526.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:46.849Z,1513224526.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:47.097Z,1513224527.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:47.220Z,1513224527.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:47.275Z,1513224527.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:47.501Z,1513224527.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:47.616Z,1513224527.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:47.632Z,1513224527.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:48.019Z,1513224528.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:48.033Z,1513224528.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:48.297Z,1513224528.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:48.416Z,1513224528.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:48.435Z,1513224528.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:48.821Z,1513224528.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:48.836Z,1513224528.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:49.093Z,1513224529.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:49.226Z,1513224529.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:49.247Z,1513224529.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:49.497Z,1513224529.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:49.626Z,1513224529.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:49.641Z,1513224529.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:50.027Z,1513224530.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:50.042Z,1513224530.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:50.293Z,1513224530.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:50.418Z,1513224530.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:50.435Z,1513224530.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:50.820Z,1513224530.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:50.840Z,1513224530.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:51.089Z,1513224531.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:51.229Z,1513224531.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:51.245Z,1513224531.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:51.493Z,1513224531.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:51.634Z,1513224531.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:51.694Z,1513224531.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:52.026Z,1513224532.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:52.042Z,1513224532.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:52.289Z,1513224532.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:52.421Z,1513224532.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:52.435Z,1513224532.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:52.817Z,1513224532.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:52.832Z,1513224532.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:53.085Z,1513224533.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:53.215Z,1513224533.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:53.242Z,1513224533.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:53.489Z,1513224533.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:53.620Z,1513224533.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:53.635Z,1513224533.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:54.012Z,1513224534.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:54.046Z,1513224534.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:54.286Z,1513224534.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:54.424Z,1513224534.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:54.439Z,1513224534.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:54.894Z,1513224534.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:54.930Z,1513224534.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:55.081Z,1513224535.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:55.210Z,1513224535.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:55.251Z,1513224535.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:55.485Z,1513224535.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:55.622Z,1513224535.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:55.638Z,1513224535.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:56.009Z,1513224536.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:56.043Z,1513224536.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:56.281Z,1513224536.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:56.410Z,1513224536.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:56.443Z,1513224536.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:56.811Z,1513224536.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:56.838Z,1513224536.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:57.079Z,1513224537.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:57.210Z,1513224537.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:57.248Z,1513224537.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:57.485Z,1513224537.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:57.610Z,1513224537.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:57.636Z,1513224537.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:58.010Z,1513224538.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:58.056Z,1513224538.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:58.281Z,1513224538.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:58.410Z,1513224538.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:58.435Z,1513224538.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:58.810Z,1513224538.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:58.890Z,1513224538.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:59.079Z,1513224539.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:59.231Z,1513224539.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:59.254Z,1513224539.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:08:59.489Z,1513224539.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:59.615Z,1513224539.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:08:59.641Z,1513224539.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:00.010Z,1513224540.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:00.043Z,1513224540.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:00.285Z,1513224540.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:00.406Z,1513224540.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:00.443Z,1513224540.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:00.810Z,1513224540.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:00.841Z,1513224540.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:01.081Z,1513224541.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:01.225Z,1513224541.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:01.264Z,1513224541.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:01.485Z,1513224541.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:01.616Z,1513224541.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:01.631Z,1513224541.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:02.018Z,1513224542.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:02.032Z,1513224542.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:02.281Z,1513224542.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:02.415Z,1513224542.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:02.423Z,1513224542.423 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:09:02.423Z,1513224542.423 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:09:02.423Z,1513224542.423 [BPC1](ERROR): Communications Fault
2017-12-14T04:09:02.432Z,1513224542.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:02.463Z,1513224542.463 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:09:02.464Z,1513224542.464 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:09:02.817Z,1513224542.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:02.832Z,1513224542.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:03.077Z,1513224543.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:03.212Z,1513224543.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:03.247Z,1513224543.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:03.481Z,1513224543.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:03.617Z,1513224543.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:03.631Z,1513224543.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:03.644Z,1513224543.644 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:09:03.644Z,1513224543.644 [BPC1] No Fault, FailCount= 1
2017-12-14T04:09:04.028Z,1513224544.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:04.104Z,1513224544.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:04.277Z,1513224544.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:04.469Z,1513224544.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:04.496Z,1513224544.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:04.810Z,1513224544.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:04.834Z,1513224544.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:05.073Z,1513224545.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:05.230Z,1513224545.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:05.246Z,1513224545.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:05.477Z,1513224545.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:05.610Z,1513224545.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:05.636Z,1513224545.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:06.023Z,1513224546.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:06.037Z,1513224546.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:06.273Z,1513224546.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:06.408Z,1513224546.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:06.439Z,1513224546.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:06.810Z,1513224546.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:06.841Z,1513224546.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:07.069Z,1513224547.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:07.209Z,1513224547.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:07.224Z,1513224547.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:07.473Z,1513224547.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:07.649Z,1513224547.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:07.701Z,1513224547.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:07.701Z,1513224547.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2017-12-14T04:09:07.701Z,1513224547.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:09:07.703Z,1513224547.703 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:07.703Z,1513224547.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2017-12-14T04:09:07.703Z,1513224547.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:09:07.705Z,1513224547.705 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:07.705Z,1513224547.705 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2017-12-14T04:09:07.705Z,1513224547.705 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:09:07.728Z,1513224547.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:09:07.728Z,1513224547.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:09:07.728Z,1513224547.728 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:09:08.018Z,1513224548.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:08.044Z,1513224548.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:09:08.044Z,1513224548.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2017-12-14T04:09:08.044Z,1513224548.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:09:08.044Z,1513224548.044 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2017-12-14T04:09:08.045Z,1513224548.045 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:09:08.045Z,1513224548.045 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2017-12-14T04:09:08.269Z,1513224548.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:08.423Z,1513224548.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:08.436Z,1513224548.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:09:08.437Z,1513224548.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:09:08.437Z,1513224548.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:09:08.437Z,1513224548.437 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:09:08.438Z,1513224548.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:09:08.438Z,1513224548.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:09:08.438Z,1513224548.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:09:08.439Z,1513224548.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:09:08.439Z,1513224548.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:09:08.845Z,1513224548.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:08.883Z,1513224548.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:09.065Z,1513224549.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:09.217Z,1513224549.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:09.233Z,1513224549.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:09.469Z,1513224549.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:09.617Z,1513224549.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:09.632Z,1513224549.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:10.007Z,1513224550.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:10.040Z,1513224550.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:10.265Z,1513224550.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:10.423Z,1513224550.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:10.438Z,1513224550.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:10.820Z,1513224550.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:10.834Z,1513224550.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:11.063Z,1513224551.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:11.220Z,1513224551.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:11.236Z,1513224551.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:11.489Z,1513224551.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:11.617Z,1513224551.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:11.632Z,1513224551.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:12.018Z,1513224552.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:12.032Z,1513224552.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:12.285Z,1513224552.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:12.416Z,1513224552.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:12.463Z,1513224552.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:12.819Z,1513224552.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:12.835Z,1513224552.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:13.083Z,1513224553.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:13.221Z,1513224553.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:13.236Z,1513224553.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:13.493Z,1513224553.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:13.618Z,1513224553.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:13.633Z,1513224553.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:14.038Z,1513224554.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:14.070Z,1513224554.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:14.289Z,1513224554.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:14.410Z,1513224554.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:14.452Z,1513224554.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:14.810Z,1513224554.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:14.824Z,1513224554.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:15.086Z,1513224555.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:15.222Z,1513224555.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:15.263Z,1513224555.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:15.489Z,1513224555.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:15.615Z,1513224555.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:15.630Z,1513224555.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:16.007Z,1513224556.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:16.023Z,1513224556.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:16.288Z,1513224556.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:16.416Z,1513224556.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:16.435Z,1513224556.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:16.817Z,1513224556.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:16.831Z,1513224556.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:17.081Z,1513224557.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:17.258Z,1513224557.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:17.321Z,1513224557.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:17.485Z,1513224557.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:17.628Z,1513224557.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:17.647Z,1513224557.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:18.022Z,1513224558.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:18.037Z,1513224558.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:18.281Z,1513224558.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:18.407Z,1513224558.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:18.432Z,1513224558.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:18.818Z,1513224558.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:18.837Z,1513224558.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:19.077Z,1513224559.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:19.213Z,1513224559.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:19.245Z,1513224559.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:19.481Z,1513224559.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:19.627Z,1513224559.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:19.642Z,1513224559.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:20.011Z,1513224560.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:20.043Z,1513224560.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:20.278Z,1513224560.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:20.414Z,1513224560.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:20.466Z,1513224560.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:20.810Z,1513224560.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:20.845Z,1513224560.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:21.073Z,1513224561.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:21.219Z,1513224561.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:21.255Z,1513224561.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:21.477Z,1513224561.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:21.618Z,1513224561.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:21.661Z,1513224561.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:22.014Z,1513224562.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:22.028Z,1513224562.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:22.273Z,1513224562.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:22.416Z,1513224562.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:22.435Z,1513224562.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:22.841Z,1513224562.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:22.860Z,1513224562.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:23.069Z,1513224563.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:23.210Z,1513224563.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:23.235Z,1513224563.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:23.473Z,1513224563.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:23.633Z,1513224563.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:23.652Z,1513224563.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:24.010Z,1513224564.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:24.043Z,1513224564.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:24.271Z,1513224564.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:24.411Z,1513224564.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:24.488Z,1513224564.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:24.820Z,1513224564.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:24.847Z,1513224564.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:25.067Z,1513224565.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:25.211Z,1513224565.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:25.263Z,1513224565.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:25.477Z,1513224565.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:25.615Z,1513224565.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:25.639Z,1513224565.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:26.015Z,1513224566.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:26.088Z,1513224566.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:26.276Z,1513224566.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:26.414Z,1513224566.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:26.440Z,1513224566.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:26.811Z,1513224566.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:26.874Z,1513224566.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:27.071Z,1513224567.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:27.212Z,1513224567.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:27.239Z,1513224567.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:27.485Z,1513224567.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:27.610Z,1513224567.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:27.645Z,1513224567.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:28.008Z,1513224568.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:28.033Z,1513224568.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:28.281Z,1513224568.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:28.411Z,1513224568.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:28.445Z,1513224568.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:28.810Z,1513224568.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:28.838Z,1513224568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:29.078Z,1513224569.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:29.232Z,1513224569.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:29.247Z,1513224569.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:29.481Z,1513224569.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:29.612Z,1513224569.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:29.644Z,1513224569.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:30.061Z,1513224570.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:30.114Z,1513224570.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:30.277Z,1513224570.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:30.408Z,1513224570.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:30.441Z,1513224570.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:30.811Z,1513224570.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:30.837Z,1513224570.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:31.073Z,1513224571.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:31.211Z,1513224571.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:31.243Z,1513224571.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:31.477Z,1513224571.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:31.615Z,1513224571.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:31.642Z,1513224571.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:32.010Z,1513224572.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:32.048Z,1513224572.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:32.273Z,1513224572.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:32.416Z,1513224572.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:32.441Z,1513224572.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:32.810Z,1513224572.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:32.844Z,1513224572.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:33.072Z,1513224573.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:33.259Z,1513224573.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:33.295Z,1513224573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:33.477Z,1513224573.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:33.616Z,1513224573.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:33.645Z,1513224573.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:34.012Z,1513224574.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:34.027Z,1513224574.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:34.273Z,1513224574.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:34.417Z,1513224574.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:34.471Z,1513224574.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:34.826Z,1513224574.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:34.868Z,1513224574.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:35.070Z,1513224575.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:35.216Z,1513224575.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:35.235Z,1513224575.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:35.473Z,1513224575.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:35.617Z,1513224575.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:35.632Z,1513224575.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:36.018Z,1513224576.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:36.033Z,1513224576.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:36.270Z,1513224576.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:36.452Z,1513224576.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:36.517Z,1513224576.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:36.832Z,1513224576.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:36.847Z,1513224576.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:37.065Z,1513224577.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:37.210Z,1513224577.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:37.247Z,1513224577.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:37.610Z,1513224577.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:37.634Z,1513224577.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:37.862Z,1513224577.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:38.008Z,1513224578.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:38.041Z,1513224578.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:38.265Z,1513224578.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:38.411Z,1513224578.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:38.437Z,1513224578.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:38.810Z,1513224578.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:38.836Z,1513224578.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:39.063Z,1513224579.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:39.210Z,1513224579.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:39.242Z,1513224579.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:39.477Z,1513224579.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:39.614Z,1513224579.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:39.645Z,1513224579.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:40.010Z,1513224580.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:40.024Z,1513224580.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:40.274Z,1513224580.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:40.408Z,1513224580.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:40.422Z,1513224580.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:40.835Z,1513224580.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:40.863Z,1513224580.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:41.071Z,1513224581.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:41.223Z,1513224581.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:41.254Z,1513224581.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:41.495Z,1513224581.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:41.615Z,1513224581.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:41.631Z,1513224581.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:42.016Z,1513224582.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:42.039Z,1513224582.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:42.289Z,1513224582.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:42.423Z,1513224582.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:42.437Z,1513224582.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:42.819Z,1513224582.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:42.839Z,1513224582.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:43.086Z,1513224583.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:43.230Z,1513224583.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:43.244Z,1513224583.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:43.489Z,1513224583.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:44.285Z,1513224584.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:45.081Z,1513224585.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:45.485Z,1513224585.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:46.281Z,1513224586.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:46.639Z,1513224586.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:46.768Z,1513224586.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:46.843Z,1513224586.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:46.945Z,1513224586.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:47.078Z,1513224587.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:47.247Z,1513224587.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:47.307Z,1513224587.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:47.481Z,1513224587.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:47.642Z,1513224587.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:47.675Z,1513224587.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:48.030Z,1513224588.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:48.098Z,1513224588.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:48.277Z,1513224588.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:48.426Z,1513224588.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:48.451Z,1513224588.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:48.827Z,1513224588.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:48.865Z,1513224588.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:49.073Z,1513224589.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:49.226Z,1513224589.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:49.259Z,1513224589.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:49.477Z,1513224589.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:49.626Z,1513224589.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:49.659Z,1513224589.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:50.020Z,1513224590.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:50.046Z,1513224590.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:50.274Z,1513224590.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:50.426Z,1513224590.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:50.470Z,1513224590.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:50.857Z,1513224590.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:50.877Z,1513224590.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:51.069Z,1513224591.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:51.227Z,1513224591.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:51.258Z,1513224591.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:51.473Z,1513224591.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:51.631Z,1513224591.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:51.670Z,1513224591.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:52.027Z,1513224592.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:52.042Z,1513224592.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:52.269Z,1513224592.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:52.424Z,1513224592.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:52.439Z,1513224592.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:52.832Z,1513224592.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:52.847Z,1513224592.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:53.067Z,1513224593.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:53.289Z,1513224593.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:53.351Z,1513224593.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:53.638Z,1513224593.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:53.671Z,1513224593.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:53.721Z,1513224593.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:54.031Z,1513224594.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:54.059Z,1513224594.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:54.426Z,1513224594.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:54.440Z,1513224594.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:54.517Z,1513224594.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:54.826Z,1513224594.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:54.840Z,1513224594.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:55.242Z,1513224595.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:55.273Z,1513224595.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:55.313Z,1513224595.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:55.632Z,1513224595.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:55.662Z,1513224595.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:55.717Z,1513224595.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:56.035Z,1513224596.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:56.074Z,1513224596.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:56.428Z,1513224596.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:56.514Z,1513224596.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:56.519Z,1513224596.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:56.830Z,1513224596.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:56.845Z,1513224596.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:57.156Z,1513224597.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:57.234Z,1513224597.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:57.275Z,1513224597.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:57.632Z,1513224597.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:57.651Z,1513224597.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:57.950Z,1513224597.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:58.035Z,1513224598.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:58.049Z,1513224598.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:58.435Z,1513224598.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:58.452Z,1513224598.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:58.748Z,1513224598.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:58.838Z,1513224598.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:58.854Z,1513224598.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:59.161Z,1513224599.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:59.230Z,1513224599.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:59.249Z,1513224599.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:59.623Z,1513224599.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:09:59.693Z,1513224599.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:09:59.960Z,1513224599.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:00.038Z,1513224600.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:00.082Z,1513224600.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:00.436Z,1513224600.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:00.451Z,1513224600.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:00.755Z,1513224600.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:00.834Z,1513224600.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:00.849Z,1513224600.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:01.165Z,1513224601.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:01.232Z,1513224601.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:01.272Z,1513224601.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:01.632Z,1513224601.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:01.646Z,1513224601.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:01.961Z,1513224601.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:02.033Z,1513224602.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:02.047Z,1513224602.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:02.441Z,1513224602.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:02.456Z,1513224602.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:02.758Z,1513224602.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:02.891Z,1513224602.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:02.916Z,1513224602.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:03.161Z,1513224603.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:03.236Z,1513224603.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:03.283Z,1513224603.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:03.640Z,1513224603.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:03.655Z,1513224603.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:03.957Z,1513224603.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:04.030Z,1513224604.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:04.063Z,1513224604.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:04.439Z,1513224604.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:04.454Z,1513224604.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:04.755Z,1513224604.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:04.842Z,1513224604.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:04.884Z,1513224604.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:05.205Z,1513224605.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:05.246Z,1513224605.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:05.297Z,1513224605.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:05.634Z,1513224605.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:05.648Z,1513224605.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:06.001Z,1513224606.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:06.040Z,1513224606.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:06.106Z,1513224606.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:06.426Z,1513224606.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:06.464Z,1513224606.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:06.802Z,1513224606.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:06.828Z,1513224606.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:06.856Z,1513224606.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:07.251Z,1513224607.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:07.267Z,1513224607.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:07.477Z,1513224607.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:07.640Z,1513224607.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:07.654Z,1513224607.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:08.027Z,1513224608.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:08.059Z,1513224608.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:08.274Z,1513224608.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:08.439Z,1513224608.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:08.522Z,1513224608.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:08.826Z,1513224608.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:08.896Z,1513224608.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:09.071Z,1513224609.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:09.258Z,1513224609.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:09.349Z,1513224609.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:09.487Z,1513224609.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:09.627Z,1513224609.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:09.663Z,1513224609.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:10.026Z,1513224610.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:10.079Z,1513224610.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:10.281Z,1513224610.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:10.430Z,1513224610.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:10.455Z,1513224610.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:10.826Z,1513224610.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:10.859Z,1513224610.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:11.077Z,1513224611.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:11.227Z,1513224611.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:11.265Z,1513224611.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:11.481Z,1513224611.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:11.632Z,1513224611.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:11.662Z,1513224611.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:12.020Z,1513224612.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:12.036Z,1513224612.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:12.277Z,1513224612.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:12.465Z,1513224612.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:12.518Z,1513224612.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:12.826Z,1513224612.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:12.872Z,1513224612.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:13.074Z,1513224613.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:13.239Z,1513224613.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:13.271Z,1513224613.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:13.477Z,1513224613.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:13.632Z,1513224613.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:13.648Z,1513224613.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:14.028Z,1513224614.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:14.043Z,1513224614.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:14.273Z,1513224614.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:14.431Z,1513224614.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:14.447Z,1513224614.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:14.489Z,1513224614.489 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T04:10:14.489Z,1513224614.489 [NAL9602] No Fault, FailCount= 5
2017-12-14T04:10:14.810Z,1513224614.810 [NAL9602](INFO): Powering up NAL9602
2017-12-14T04:10:14.840Z,1513224614.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:14.863Z,1513224614.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:15.069Z,1513224615.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:15.236Z,1513224615.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:15.251Z,1513224615.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:15.473Z,1513224615.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:15.646Z,1513224615.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:15.694Z,1513224615.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:16.046Z,1513224616.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:16.092Z,1513224616.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:16.272Z,1513224616.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:16.427Z,1513224616.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:16.451Z,1513224616.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:16.834Z,1513224616.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:16.849Z,1513224616.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:17.065Z,1513224617.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:17.230Z,1513224617.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:17.258Z,1513224617.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:17.469Z,1513224617.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:17.639Z,1513224617.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:17.660Z,1513224617.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:18.030Z,1513224618.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:18.044Z,1513224618.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:18.265Z,1513224618.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:18.434Z,1513224618.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:18.482Z,1513224618.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:18.880Z,1513224618.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:18.912Z,1513224618.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:19.061Z,1513224619.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:19.235Z,1513224619.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:19.283Z,1513224619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:19.465Z,1513224619.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:19.638Z,1513224619.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:19.653Z,1513224619.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:20.035Z,1513224620.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:20.055Z,1513224620.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:20.261Z,1513224620.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:20.435Z,1513224620.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:20.450Z,1513224620.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:20.839Z,1513224620.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:20.860Z,1513224620.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:21.059Z,1513224621.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:21.234Z,1513224621.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:21.257Z,1513224621.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:21.497Z,1513224621.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:21.624Z,1513224621.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:21.639Z,1513224621.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:22.067Z,1513224622.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:22.089Z,1513224622.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:22.296Z,1513224622.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:22.423Z,1513224622.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:22.464Z,1513224622.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:22.835Z,1513224622.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:22.866Z,1513224622.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:23.091Z,1513224623.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:23.232Z,1513224623.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:23.280Z,1513224623.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:23.501Z,1513224623.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:23.631Z,1513224623.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:23.645Z,1513224623.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:24.032Z,1513224624.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:24.047Z,1513224624.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:24.297Z,1513224624.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:24.434Z,1513224624.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:24.448Z,1513224624.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:24.835Z,1513224624.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:24.850Z,1513224624.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:25.093Z,1513224625.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:25.290Z,1513224625.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:25.326Z,1513224625.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:25.497Z,1513224625.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:25.622Z,1513224625.622 [NAL9602](INFO): NAL9602 initialized
2017-12-14T04:10:25.639Z,1513224625.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:25.706Z,1513224625.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:26.033Z,1513224626.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:26.047Z,1513224626.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:26.293Z,1513224626.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:26.445Z,1513224626.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:26.460Z,1513224626.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:26.838Z,1513224626.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:26.852Z,1513224626.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:27.089Z,1513224627.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:27.241Z,1513224627.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:27.263Z,1513224627.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:27.637Z,1513224627.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:27.659Z,1513224627.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:27.753Z,1513224627.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:28.035Z,1513224628.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:28.051Z,1513224628.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:28.466Z,1513224628.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:28.492Z,1513224628.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:28.550Z,1513224628.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:28.842Z,1513224628.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:28.882Z,1513224628.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:29.141Z,1513224629.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:29.242Z,1513224629.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:29.256Z,1513224629.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:29.640Z,1513224629.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:29.655Z,1513224629.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:29.937Z,1513224629.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:30.048Z,1513224630.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:30.092Z,1513224630.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:30.430Z,1513224630.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:30.523Z,1513224630.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:30.735Z,1513224630.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:30.827Z,1513224630.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:30.856Z,1513224630.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:31.146Z,1513224631.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:31.250Z,1513224631.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:31.265Z,1513224631.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:31.655Z,1513224631.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:31.719Z,1513224631.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:31.941Z,1513224631.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:32.063Z,1513224632.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:32.077Z,1513224632.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:32.421Z,1513224632.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:32.480Z,1513224632.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:32.737Z,1513224632.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:32.847Z,1513224632.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:32.892Z,1513224632.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:33.189Z,1513224633.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:33.231Z,1513224633.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:33.265Z,1513224633.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:33.632Z,1513224633.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:33.669Z,1513224633.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:33.985Z,1513224633.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:34.027Z,1513224634.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:34.042Z,1513224634.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:34.457Z,1513224634.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:34.476Z,1513224634.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:34.781Z,1513224634.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:34.870Z,1513224634.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:34.890Z,1513224634.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:35.246Z,1513224635.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:35.277Z,1513224635.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:35.489Z,1513224635.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:35.633Z,1513224635.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:35.667Z,1513224635.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:36.035Z,1513224636.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:36.050Z,1513224636.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:36.286Z,1513224636.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:36.431Z,1513224636.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:36.451Z,1513224636.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:36.840Z,1513224636.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:36.881Z,1513224636.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:37.083Z,1513224637.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:37.245Z,1513224637.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:37.260Z,1513224637.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:37.493Z,1513224637.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:37.649Z,1513224637.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:37.664Z,1513224637.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:38.058Z,1513224638.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:38.112Z,1513224638.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:38.289Z,1513224638.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:38.437Z,1513224638.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:38.483Z,1513224638.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:38.848Z,1513224638.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:38.867Z,1513224638.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:39.085Z,1513224639.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:39.230Z,1513224639.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:39.257Z,1513224639.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:39.489Z,1513224639.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:39.641Z,1513224639.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:39.656Z,1513224639.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:40.027Z,1513224640.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:40.069Z,1513224640.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:40.285Z,1513224640.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:40.451Z,1513224640.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:40.465Z,1513224640.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:40.852Z,1513224640.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:40.903Z,1513224640.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:41.084Z,1513224641.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:41.253Z,1513224641.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:41.297Z,1513224641.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:41.489Z,1513224641.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:41.627Z,1513224641.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:41.662Z,1513224641.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:42.031Z,1513224642.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:42.059Z,1513224642.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:42.288Z,1513224642.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:42.450Z,1513224642.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:42.465Z,1513224642.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:42.825Z,1513224642.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:42.856Z,1513224642.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:43.081Z,1513224643.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:43.246Z,1513224643.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:43.282Z,1513224643.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:43.485Z,1513224643.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:44.281Z,1513224644.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:45.078Z,1513224645.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:45.481Z,1513224645.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:46.277Z,1513224646.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:46.646Z,1513224646.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:46.663Z,1513224646.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:46.822Z,1513224646.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:46.867Z,1513224646.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:47.074Z,1513224647.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:47.131Z,1513224647.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:47.146Z,1513224647.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:47.477Z,1513224647.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:47.531Z,1513224647.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:47.546Z,1513224647.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:47.916Z,1513224647.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:47.949Z,1513224647.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:48.273Z,1513224648.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:48.329Z,1513224648.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:48.363Z,1513224648.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:48.729Z,1513224648.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:48.763Z,1513224648.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:49.071Z,1513224649.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:49.156Z,1513224649.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:49.179Z,1513224649.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:49.505Z,1513224649.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:49.524Z,1513224649.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:49.540Z,1513224649.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:49.919Z,1513224649.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:49.934Z,1513224649.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:50.302Z,1513224650.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:50.318Z,1513224650.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:50.346Z,1513224650.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:50.719Z,1513224650.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:50.734Z,1513224650.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:51.104Z,1513224651.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:51.169Z,1513224651.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:51.184Z,1513224651.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:51.510Z,1513224651.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:51.534Z,1513224651.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:51.564Z,1513224651.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:51.924Z,1513224651.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:51.947Z,1513224651.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:52.305Z,1513224652.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:52.326Z,1513224652.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:52.340Z,1513224652.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:52.766Z,1513224652.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:52.844Z,1513224652.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:53.104Z,1513224653.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:53.117Z,1513224653.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:53.179Z,1513224653.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:53.510Z,1513224653.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:53.514Z,1513224653.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:53.528Z,1513224653.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:53.916Z,1513224653.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:53.963Z,1513224653.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:54.306Z,1513224654.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:54.322Z,1513224654.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:54.336Z,1513224654.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:54.835Z,1513224654.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:54.881Z,1513224654.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:55.101Z,1513224655.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:55.130Z,1513224655.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:55.164Z,1513224655.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:55.505Z,1513224655.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:55.522Z,1513224655.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:55.537Z,1513224655.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:55.921Z,1513224655.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:55.935Z,1513224655.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:56.302Z,1513224656.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:56.318Z,1513224656.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:56.348Z,1513224656.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:56.773Z,1513224656.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:56.803Z,1513224656.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:57.097Z,1513224657.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:57.134Z,1513224657.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:57.163Z,1513224657.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:57.501Z,1513224657.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:57.539Z,1513224657.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:57.559Z,1513224657.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:57.927Z,1513224657.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:57.951Z,1513224657.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:58.300Z,1513224658.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:58.323Z,1513224658.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:58.343Z,1513224658.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:58.793Z,1513224658.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:58.843Z,1513224658.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:59.093Z,1513224659.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:59.115Z,1513224659.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:59.135Z,1513224659.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:59.497Z,1513224659.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:59.513Z,1513224659.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:59.527Z,1513224659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:10:59.911Z,1513224659.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:10:59.943Z,1513224659.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:00.293Z,1513224660.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:00.332Z,1513224660.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:00.353Z,1513224660.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:00.738Z,1513224660.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:00.834Z,1513224660.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:01.089Z,1513224661.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:01.145Z,1513224661.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:01.179Z,1513224661.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:01.493Z,1513224661.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:01.520Z,1513224661.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:01.553Z,1513224661.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:01.918Z,1513224661.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:01.932Z,1513224661.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:02.289Z,1513224662.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:02.320Z,1513224662.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:02.355Z,1513224662.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:02.719Z,1513224662.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:02.756Z,1513224662.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:03.087Z,1513224663.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:03.148Z,1513224663.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:03.203Z,1513224663.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:03.497Z,1513224663.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:03.536Z,1513224663.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:03.561Z,1513224663.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:03.937Z,1513224663.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:03.954Z,1513224663.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:04.293Z,1513224664.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:04.351Z,1513224664.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:04.399Z,1513224664.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:04.718Z,1513224664.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:04.753Z,1513224664.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:05.091Z,1513224665.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:05.139Z,1513224665.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:05.174Z,1513224665.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:05.502Z,1513224665.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:05.530Z,1513224665.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:05.546Z,1513224665.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:05.920Z,1513224665.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:05.940Z,1513224665.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:06.297Z,1513224666.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:06.331Z,1513224666.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:06.351Z,1513224666.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:06.787Z,1513224666.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:06.831Z,1513224666.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:07.093Z,1513224667.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:07.140Z,1513224667.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:07.164Z,1513224667.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:07.497Z,1513224667.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:07.556Z,1513224667.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:07.594Z,1513224667.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:07.932Z,1513224667.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:07.950Z,1513224667.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:08.293Z,1513224668.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:08.314Z,1513224668.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:08.356Z,1513224668.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:08.776Z,1513224668.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:08.823Z,1513224668.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:09.089Z,1513224669.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:09.126Z,1513224669.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:09.149Z,1513224669.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:09.493Z,1513224669.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:09.535Z,1513224669.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:09.552Z,1513224669.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:09.934Z,1513224669.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:09.949Z,1513224669.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:10.289Z,1513224670.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:10.328Z,1513224670.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:10.343Z,1513224670.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:10.794Z,1513224670.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:10.830Z,1513224670.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:11.085Z,1513224671.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:11.146Z,1513224671.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:11.178Z,1513224671.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:11.489Z,1513224671.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:11.526Z,1513224671.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:11.550Z,1513224671.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:11.916Z,1513224671.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:11.944Z,1513224671.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:12.285Z,1513224672.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:12.332Z,1513224672.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:12.349Z,1513224672.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:12.791Z,1513224672.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:12.835Z,1513224672.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:13.094Z,1513224673.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:13.138Z,1513224673.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:13.161Z,1513224673.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:13.497Z,1513224673.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:13.516Z,1513224673.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:13.531Z,1513224673.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:13.919Z,1513224673.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:13.934Z,1513224673.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:14.293Z,1513224674.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:14.328Z,1513224674.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:14.363Z,1513224674.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:14.717Z,1513224674.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:14.881Z,1513224674.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:15.089Z,1513224675.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:15.150Z,1513224675.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:15.182Z,1513224675.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:15.493Z,1513224675.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:15.533Z,1513224675.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:15.583Z,1513224675.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:15.925Z,1513224675.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:15.957Z,1513224675.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:16.289Z,1513224676.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:16.320Z,1513224676.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:16.339Z,1513224676.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:16.717Z,1513224676.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:16.771Z,1513224676.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:17.086Z,1513224677.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:17.165Z,1513224677.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:17.208Z,1513224677.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:17.493Z,1513224677.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:17.521Z,1513224677.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:17.571Z,1513224677.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:17.915Z,1513224677.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:17.930Z,1513224677.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:18.289Z,1513224678.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:18.333Z,1513224678.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:18.362Z,1513224678.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:18.770Z,1513224678.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:18.793Z,1513224678.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:19.106Z,1513224679.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:19.150Z,1513224679.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:19.290Z,1513224679.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:19.513Z,1513224679.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:19.514Z,1513224679.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:19.549Z,1513224679.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:19.918Z,1513224679.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:19.960Z,1513224679.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:20.310Z,1513224680.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:20.386Z,1513224680.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:20.446Z,1513224680.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:20.801Z,1513224680.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:20.866Z,1513224680.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:21.108Z,1513224681.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:21.124Z,1513224681.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:21.187Z,1513224681.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:21.519Z,1513224681.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:21.530Z,1513224681.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:21.566Z,1513224681.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:21.949Z,1513224681.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:22.019Z,1513224682.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:22.314Z,1513224682.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:22.315Z,1513224682.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:22.362Z,1513224682.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:22.779Z,1513224682.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:22.831Z,1513224682.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:23.110Z,1513224683.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:23.154Z,1513224683.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:23.190Z,1513224683.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:23.514Z,1513224683.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:23.515Z,1513224683.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:23.581Z,1513224683.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:23.922Z,1513224683.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:23.943Z,1513224683.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:24.309Z,1513224684.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:24.331Z,1513224684.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:24.385Z,1513224684.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:24.754Z,1513224684.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:24.807Z,1513224684.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:25.105Z,1513224685.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:25.134Z,1513224685.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:25.166Z,1513224685.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:25.510Z,1513224685.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:25.554Z,1513224685.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:25.656Z,1513224685.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:25.914Z,1513224685.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:25.959Z,1513224685.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:26.305Z,1513224686.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:26.346Z,1513224686.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:26.378Z,1513224686.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:26.811Z,1513224686.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:26.833Z,1513224686.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:27.102Z,1513224687.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:27.140Z,1513224687.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:27.206Z,1513224687.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:27.505Z,1513224687.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:27.538Z,1513224687.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:27.554Z,1513224687.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:27.941Z,1513224687.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:27.963Z,1513224687.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:28.302Z,1513224688.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:28.307Z,1513224688.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:28.349Z,1513224688.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:28.716Z,1513224688.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:28.811Z,1513224688.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:29.097Z,1513224689.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:29.139Z,1513224689.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:29.166Z,1513224689.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:29.501Z,1513224689.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:29.513Z,1513224689.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:29.600Z,1513224689.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:29.921Z,1513224689.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:29.936Z,1513224689.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:30.318Z,1513224690.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:30.380Z,1513224690.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:30.440Z,1513224690.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:30.725Z,1513224690.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:30.765Z,1513224690.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:31.114Z,1513224691.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:31.168Z,1513224691.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:31.237Z,1513224691.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:31.526Z,1513224691.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:31.535Z,1513224691.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:31.579Z,1513224691.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:31.927Z,1513224691.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:31.978Z,1513224691.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:32.322Z,1513224692.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:32.323Z,1513224692.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:32.378Z,1513224692.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:32.722Z,1513224692.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:32.748Z,1513224692.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:33.118Z,1513224693.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:33.144Z,1513224693.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:33.203Z,1513224693.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:33.526Z,1513224693.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:33.548Z,1513224693.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:33.626Z,1513224693.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:33.933Z,1513224693.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:33.991Z,1513224693.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:34.321Z,1513224694.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:34.325Z,1513224694.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:34.381Z,1513224694.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:34.790Z,1513224694.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:34.874Z,1513224694.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:35.118Z,1513224695.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:35.146Z,1513224695.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:35.196Z,1513224695.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:35.521Z,1513224695.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:35.526Z,1513224695.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:35.549Z,1513224695.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:35.914Z,1513224695.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:35.965Z,1513224695.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:36.318Z,1513224696.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:36.328Z,1513224696.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:36.350Z,1513224696.350 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T04:11:36.350Z,1513224696.350 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:11:36.350Z,1513224696.350 [BPC1](ERROR): Data Fault
2017-12-14T04:11:36.416Z,1513224696.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:36.429Z,1513224696.429 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:11:36.799Z,1513224696.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:36.839Z,1513224696.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:37.114Z,1513224697.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:37.131Z,1513224697.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:37.200Z,1513224697.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:37.518Z,1513224697.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:37.523Z,1513224697.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:37.548Z,1513224697.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:37.606Z,1513224697.606 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:11:37.606Z,1513224697.606 [BPC1] No Fault, FailCount= 1
2017-12-14T04:11:37.923Z,1513224697.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:38.020Z,1513224698.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:38.314Z,1513224698.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:38.350Z,1513224698.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:38.386Z,1513224698.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:38.785Z,1513224698.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:38.858Z,1513224698.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:39.110Z,1513224699.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:39.147Z,1513224699.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:39.171Z,1513224699.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:39.513Z,1513224699.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:39.556Z,1513224699.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:39.579Z,1513224699.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:39.924Z,1513224699.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:39.995Z,1513224699.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:40.329Z,1513224700.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:40.363Z,1513224700.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:40.408Z,1513224700.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:40.783Z,1513224700.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:40.831Z,1513224700.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:41.125Z,1513224701.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:41.146Z,1513224701.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:41.194Z,1513224701.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:41.514Z,1513224701.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:41.529Z,1513224701.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:41.597Z,1513224701.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:41.922Z,1513224701.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:41.953Z,1513224701.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:42.325Z,1513224702.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:42.331Z,1513224702.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:42.364Z,1513224702.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:42.733Z,1513224702.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:42.824Z,1513224702.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:42.835Z,1513224702.835 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:11:42.835Z,1513224702.835 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:11:42.835Z,1513224702.835 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:11:42.835Z,1513224702.835 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:11:43.122Z,1513224703.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:43.136Z,1513224703.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:43.167Z,1513224703.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:43.171Z,1513224703.171 [Default:CheckIn:D] Stopped
2017-12-14T04:11:43.171Z,1513224703.171 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:11:43.512Z,1513224703.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:43.525Z,1513224703.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:43.544Z,1513224703.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:43.552Z,1513224703.552 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 218.463021 min 
2017-12-14T04:11:43.552Z,1513224703.552 [Default:CheckIn:E] Stopped
2017-12-14T04:11:43.552Z,1513224703.552 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn] Stopped
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn](INFO): Running loop #22
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn] Running Loop=22
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:11:43.557Z,1513224703.557 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:11:44.321Z,1513224704.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:45.118Z,1513224705.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:45.521Z,1513224705.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:46.317Z,1513224706.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.065Z,1513224707.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.114Z,1513224707.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.163Z,1513224707.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:47.258Z,1513224707.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.274Z,1513224707.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:47.517Z,1513224707.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.630Z,1513224707.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:47.671Z,1513224707.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:48.044Z,1513224708.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:48.059Z,1513224708.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:48.313Z,1513224708.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:48.426Z,1513224708.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:48.460Z,1513224708.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:48.811Z,1513224708.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:48.825Z,1513224708.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:49.109Z,1513224709.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:49.215Z,1513224709.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:49.231Z,1513224709.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:49.513Z,1513224709.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:49.619Z,1513224709.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:49.658Z,1513224709.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:50.023Z,1513224710.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:50.074Z,1513224710.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:50.310Z,1513224710.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:50.431Z,1513224710.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:50.488Z,1513224710.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:50.826Z,1513224710.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:50.847Z,1513224710.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:51.105Z,1513224711.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:51.222Z,1513224711.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:51.251Z,1513224711.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:51.509Z,1513224711.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:51.618Z,1513224711.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:51.645Z,1513224711.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:52.008Z,1513224712.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:52.040Z,1513224712.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:52.305Z,1513224712.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:52.415Z,1513224712.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:52.442Z,1513224712.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:52.812Z,1513224712.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:52.840Z,1513224712.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:53.101Z,1513224713.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:53.234Z,1513224713.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:53.257Z,1513224713.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:53.505Z,1513224713.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:53.634Z,1513224713.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:53.659Z,1513224713.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:54.035Z,1513224714.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:54.089Z,1513224714.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:54.301Z,1513224714.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:54.415Z,1513224714.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:54.447Z,1513224714.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:54.837Z,1513224714.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:54.855Z,1513224714.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:55.097Z,1513224715.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:55.212Z,1513224715.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:55.240Z,1513224715.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:55.617Z,1513224715.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:55.648Z,1513224715.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:55.893Z,1513224715.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:56.018Z,1513224716.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:56.033Z,1513224716.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:56.458Z,1513224716.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:56.492Z,1513224716.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:56.689Z,1513224716.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:56.851Z,1513224716.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:56.892Z,1513224716.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:57.227Z,1513224717.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:57.266Z,1513224717.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:57.485Z,1513224717.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:57.648Z,1513224717.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:57.682Z,1513224717.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:58.020Z,1513224718.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:58.035Z,1513224718.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:58.281Z,1513224718.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:58.425Z,1513224718.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:58.441Z,1513224718.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:58.814Z,1513224718.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:58.871Z,1513224718.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:59.079Z,1513224719.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:59.235Z,1513224719.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:59.304Z,1513224719.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:59.645Z,1513224719.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:11:59.695Z,1513224719.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:11:59.874Z,1513224719.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:00.059Z,1513224720.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:00.079Z,1513224720.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:00.420Z,1513224720.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:00.480Z,1513224720.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:00.670Z,1513224720.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:00.819Z,1513224720.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:00.855Z,1513224720.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:01.209Z,1513224721.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:01.259Z,1513224721.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:01.465Z,1513224721.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:01.622Z,1513224721.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:01.661Z,1513224721.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:02.019Z,1513224722.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:02.036Z,1513224722.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:02.261Z,1513224722.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:02.425Z,1513224722.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:02.441Z,1513224722.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:02.846Z,1513224722.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:02.898Z,1513224722.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:03.057Z,1513224723.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:03.231Z,1513224723.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:03.246Z,1513224723.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:03.622Z,1513224723.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:03.636Z,1513224723.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:03.865Z,1513224723.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:04.017Z,1513224724.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:04.041Z,1513224724.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:04.419Z,1513224724.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:04.435Z,1513224724.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:04.597Z,1513224724.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:04.820Z,1513224724.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:04.835Z,1513224724.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:05.001Z,1513224725.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:05.228Z,1513224725.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:05.243Z,1513224725.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:05.405Z,1513224725.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:05.633Z,1513224725.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:05.655Z,1513224725.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:05.809Z,1513224725.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.072Z,1513224726.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.104Z,1513224726.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:06.214Z,1513224726.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.412Z,1513224726.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.444Z,1513224726.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:06.617Z,1513224726.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.812Z,1513224726.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:06.855Z,1513224726.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:07.145Z,1513224727.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:07.224Z,1513224727.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:07.247Z,1513224727.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:07.618Z,1513224727.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:07.657Z,1513224727.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:07.941Z,1513224727.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:08.018Z,1513224728.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:08.032Z,1513224728.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:08.417Z,1513224728.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:08.432Z,1513224728.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:08.748Z,1513224728.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:08.849Z,1513224728.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:08.863Z,1513224728.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:08.863Z,1513224728.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2017-12-14T04:12:08.863Z,1513224728.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:12:08.865Z,1513224728.865 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:08.866Z,1513224728.866 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2017-12-14T04:12:08.866Z,1513224728.866 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:12:08.867Z,1513224728.867 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:08.868Z,1513224728.868 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2017-12-14T04:12:08.868Z,1513224728.868 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:12:08.887Z,1513224728.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:12:08.888Z,1513224728.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:12:08.888Z,1513224728.888 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:12:09.157Z,1513224729.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:09.242Z,1513224729.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:09.335Z,1513224729.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:12:09.335Z,1513224729.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2017-12-14T04:12:09.336Z,1513224729.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:12:09.336Z,1513224729.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2017-12-14T04:12:09.336Z,1513224729.336 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:12:09.336Z,1513224729.336 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2017-12-14T04:12:09.620Z,1513224729.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:09.633Z,1513224729.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:12:09.633Z,1513224729.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:12:09.634Z,1513224729.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:12:09.634Z,1513224729.634 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:12:09.634Z,1513224729.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:12:09.635Z,1513224729.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:12:09.635Z,1513224729.635 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:12:09.635Z,1513224729.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:12:09.636Z,1513224729.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:12:09.955Z,1513224729.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:10.014Z,1513224730.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:10.032Z,1513224730.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:10.420Z,1513224730.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:10.435Z,1513224730.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:10.751Z,1513224730.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:10.838Z,1513224730.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:10.880Z,1513224730.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:11.224Z,1513224731.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:11.248Z,1513224731.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:11.255Z,1513224731.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:11.638Z,1513224731.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:11.652Z,1513224731.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:12.030Z,1513224732.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:12.045Z,1513224732.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:12.049Z,1513224732.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:12.411Z,1513224732.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:12.491Z,1513224732.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:12.811Z,1513224732.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:12.845Z,1513224732.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:12.846Z,1513224732.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:13.212Z,1513224733.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:13.242Z,1513224733.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:13.505Z,1513224733.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:13.612Z,1513224733.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:13.648Z,1513224733.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:14.015Z,1513224734.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:14.047Z,1513224734.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:14.301Z,1513224734.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:14.435Z,1513224734.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:14.451Z,1513224734.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:14.836Z,1513224734.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:14.851Z,1513224734.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:15.099Z,1513224735.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:15.243Z,1513224735.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:15.259Z,1513224735.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:15.505Z,1513224735.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:15.623Z,1513224735.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:15.659Z,1513224735.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:16.016Z,1513224736.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:16.055Z,1513224736.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:16.301Z,1513224736.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:16.416Z,1513224736.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:16.439Z,1513224736.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:16.820Z,1513224736.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:16.834Z,1513224736.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:17.097Z,1513224737.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:17.226Z,1513224737.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:17.240Z,1513224737.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:17.501Z,1513224737.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:17.645Z,1513224737.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:17.677Z,1513224737.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:18.026Z,1513224738.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:18.066Z,1513224738.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:18.297Z,1513224738.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:18.422Z,1513224738.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:18.437Z,1513224738.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:18.852Z,1513224738.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:18.890Z,1513224738.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:19.093Z,1513224739.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:19.220Z,1513224739.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:19.268Z,1513224739.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:19.497Z,1513224739.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:19.625Z,1513224739.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:19.640Z,1513224739.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:20.025Z,1513224740.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:20.040Z,1513224740.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:20.293Z,1513224740.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:20.430Z,1513224740.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:20.451Z,1513224740.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:20.832Z,1513224740.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:20.848Z,1513224740.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:21.089Z,1513224741.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:21.229Z,1513224741.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:21.307Z,1513224741.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:21.493Z,1513224741.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:21.608Z,1513224741.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:21.650Z,1513224741.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:22.058Z,1513224742.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:22.144Z,1513224742.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:22.289Z,1513224742.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:22.413Z,1513224742.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:22.463Z,1513224742.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:22.811Z,1513224742.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:22.860Z,1513224742.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:23.085Z,1513224743.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:23.229Z,1513224743.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:23.258Z,1513224743.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:23.489Z,1513224743.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:23.638Z,1513224743.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:23.653Z,1513224743.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:24.036Z,1513224744.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:24.061Z,1513224744.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:24.285Z,1513224744.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:24.415Z,1513224744.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:24.447Z,1513224744.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:24.848Z,1513224744.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:24.895Z,1513224744.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:25.081Z,1513224745.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:25.211Z,1513224745.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:25.286Z,1513224745.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:25.485Z,1513224745.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:25.616Z,1513224745.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:25.631Z,1513224745.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:26.025Z,1513224746.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:26.039Z,1513224746.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:26.281Z,1513224746.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:26.430Z,1513224746.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:26.451Z,1513224746.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:26.838Z,1513224746.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:26.877Z,1513224746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:27.079Z,1513224747.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:27.236Z,1513224747.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:27.260Z,1513224747.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:27.497Z,1513224747.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:27.624Z,1513224747.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:27.638Z,1513224747.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:28.024Z,1513224748.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:28.043Z,1513224748.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:28.293Z,1513224748.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:28.486Z,1513224748.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:28.510Z,1513224748.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:28.811Z,1513224748.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:28.839Z,1513224748.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:29.091Z,1513224749.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:29.242Z,1513224749.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:29.256Z,1513224749.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:29.497Z,1513224749.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:29.640Z,1513224749.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:29.659Z,1513224749.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:30.036Z,1513224750.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:30.050Z,1513224750.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:30.293Z,1513224750.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:30.415Z,1513224750.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:30.447Z,1513224750.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:30.815Z,1513224750.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:30.841Z,1513224750.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:31.089Z,1513224751.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:31.211Z,1513224751.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:31.252Z,1513224751.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:31.493Z,1513224751.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:31.632Z,1513224751.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:31.685Z,1513224751.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:32.023Z,1513224752.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:32.062Z,1513224752.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:32.289Z,1513224752.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:32.436Z,1513224752.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:32.451Z,1513224752.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:32.836Z,1513224752.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:32.851Z,1513224752.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:33.085Z,1513224753.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:33.222Z,1513224753.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:33.260Z,1513224753.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:33.489Z,1513224753.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:33.616Z,1513224753.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:33.675Z,1513224753.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:34.025Z,1513224754.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:34.040Z,1513224754.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:34.285Z,1513224754.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:34.426Z,1513224754.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:34.441Z,1513224754.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:34.840Z,1513224754.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:34.896Z,1513224754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:35.081Z,1513224755.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:35.235Z,1513224755.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:35.256Z,1513224755.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:35.643Z,1513224755.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:35.663Z,1513224755.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:35.880Z,1513224755.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:36.024Z,1513224756.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:36.051Z,1513224756.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:36.285Z,1513224756.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:36.415Z,1513224756.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:36.447Z,1513224756.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:36.823Z,1513224756.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:36.859Z,1513224756.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:37.081Z,1513224757.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:37.212Z,1513224757.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:37.251Z,1513224757.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:37.485Z,1513224757.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:37.617Z,1513224757.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:37.646Z,1513224757.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:38.012Z,1513224758.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:38.049Z,1513224758.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:38.281Z,1513224758.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:38.435Z,1513224758.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:38.456Z,1513224758.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:38.847Z,1513224758.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:38.889Z,1513224758.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:39.078Z,1513224759.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:39.234Z,1513224759.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:39.256Z,1513224759.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:39.481Z,1513224759.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:39.669Z,1513224759.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:39.684Z,1513224759.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:40.021Z,1513224760.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:40.064Z,1513224760.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:40.277Z,1513224760.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:40.419Z,1513224760.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:40.436Z,1513224760.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:40.816Z,1513224760.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:40.830Z,1513224760.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:41.075Z,1513224761.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:41.225Z,1513224761.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:41.241Z,1513224761.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:41.489Z,1513224761.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:41.637Z,1513224761.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:41.671Z,1513224761.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:42.049Z,1513224762.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:42.064Z,1513224762.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:42.285Z,1513224762.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:42.415Z,1513224762.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:42.453Z,1513224762.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:42.815Z,1513224762.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:42.911Z,1513224762.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:43.091Z,1513224763.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:43.212Z,1513224763.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:43.231Z,1513224763.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:43.497Z,1513224763.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:43.624Z,1513224763.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:43.656Z,1513224763.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:44.293Z,1513224764.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:45.089Z,1513224765.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:45.493Z,1513224765.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:46.289Z,1513224766.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.088Z,1513224767.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.103Z,1513224767.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.170Z,1513224767.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:47.286Z,1513224767.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.302Z,1513224767.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:47.493Z,1513224767.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.637Z,1513224767.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:47.703Z,1513224767.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:48.045Z,1513224768.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:48.075Z,1513224768.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:48.289Z,1513224768.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:48.419Z,1513224768.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:48.463Z,1513224768.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:48.819Z,1513224768.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:48.845Z,1513224768.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:49.085Z,1513224769.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:49.220Z,1513224769.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:49.251Z,1513224769.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:49.489Z,1513224769.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:49.624Z,1513224769.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:49.663Z,1513224769.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:50.019Z,1513224770.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:50.060Z,1513224770.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:50.285Z,1513224770.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:50.442Z,1513224770.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:50.456Z,1513224770.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:50.840Z,1513224770.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:50.900Z,1513224770.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:51.085Z,1513224771.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:51.266Z,1513224771.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:51.305Z,1513224771.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:51.491Z,1513224771.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:51.629Z,1513224771.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:51.663Z,1513224771.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:52.014Z,1513224772.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:52.030Z,1513224772.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:52.285Z,1513224772.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:52.424Z,1513224772.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:52.471Z,1513224772.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:52.869Z,1513224772.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:52.883Z,1513224772.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:53.081Z,1513224773.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:53.241Z,1513224773.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:53.275Z,1513224773.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:53.485Z,1513224773.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:53.641Z,1513224773.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:53.666Z,1513224773.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:54.038Z,1513224774.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:54.074Z,1513224774.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:54.281Z,1513224774.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:54.420Z,1513224774.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:54.485Z,1513224774.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:54.819Z,1513224774.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:54.844Z,1513224774.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:55.080Z,1513224775.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:55.219Z,1513224775.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:55.245Z,1513224775.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:55.501Z,1513224775.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:55.617Z,1513224775.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:55.651Z,1513224775.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:56.035Z,1513224776.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:56.109Z,1513224776.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:56.297Z,1513224776.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:56.443Z,1513224776.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:56.461Z,1513224776.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:56.846Z,1513224776.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:56.861Z,1513224776.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:57.095Z,1513224777.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:57.248Z,1513224777.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:57.272Z,1513224777.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:57.505Z,1513224777.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:57.684Z,1513224777.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:57.750Z,1513224777.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:58.023Z,1513224778.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:58.070Z,1513224778.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:58.301Z,1513224778.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:58.424Z,1513224778.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:58.459Z,1513224778.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:58.820Z,1513224778.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:58.859Z,1513224778.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:59.097Z,1513224779.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:59.238Z,1513224779.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:59.275Z,1513224779.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:12:59.501Z,1513224779.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:59.642Z,1513224779.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:12:59.663Z,1513224779.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:00.041Z,1513224780.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:00.064Z,1513224780.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:00.297Z,1513224780.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:00.416Z,1513224780.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:00.454Z,1513224780.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:00.841Z,1513224780.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:00.889Z,1513224780.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:01.093Z,1513224781.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:01.219Z,1513224781.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:01.239Z,1513224781.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:01.497Z,1513224781.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:01.625Z,1513224781.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:01.664Z,1513224781.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:02.027Z,1513224782.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:02.044Z,1513224782.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:02.293Z,1513224782.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:02.437Z,1513224782.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:02.479Z,1513224782.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:02.837Z,1513224782.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:02.852Z,1513224782.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:03.089Z,1513224783.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:03.241Z,1513224783.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:03.256Z,1513224783.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:03.493Z,1513224783.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:03.633Z,1513224783.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:03.648Z,1513224783.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:04.032Z,1513224784.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:04.086Z,1513224784.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:04.289Z,1513224784.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:04.425Z,1513224784.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:04.449Z,1513224784.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:04.828Z,1513224784.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:04.843Z,1513224784.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:05.085Z,1513224785.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:05.238Z,1513224785.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:05.272Z,1513224785.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:05.489Z,1513224785.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:05.643Z,1513224785.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:05.666Z,1513224785.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:06.047Z,1513224786.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:06.063Z,1513224786.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:06.285Z,1513224786.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:06.419Z,1513224786.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:06.455Z,1513224786.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:06.844Z,1513224786.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:06.886Z,1513224786.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:07.084Z,1513224787.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:07.227Z,1513224787.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:07.265Z,1513224787.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:07.492Z,1513224787.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:07.628Z,1513224787.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:07.655Z,1513224787.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:08.032Z,1513224788.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:08.115Z,1513224788.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:08.285Z,1513224788.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:08.439Z,1513224788.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:08.461Z,1513224788.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:08.842Z,1513224788.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:08.865Z,1513224788.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:09.083Z,1513224789.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:09.266Z,1513224789.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:09.338Z,1513224789.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:09.493Z,1513224789.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:09.620Z,1513224789.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:09.664Z,1513224789.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:10.014Z,1513224790.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:10.078Z,1513224790.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:10.289Z,1513224790.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:10.475Z,1513224790.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:10.507Z,1513224790.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:10.824Z,1513224790.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:10.871Z,1513224790.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:11.087Z,1513224791.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:11.240Z,1513224791.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:11.256Z,1513224791.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:11.493Z,1513224791.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:11.649Z,1513224791.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:11.672Z,1513224791.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:12.045Z,1513224792.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:12.075Z,1513224792.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:12.289Z,1513224792.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:12.413Z,1513224792.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:12.460Z,1513224792.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:12.818Z,1513224792.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:12.857Z,1513224792.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:13.085Z,1513224793.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:13.228Z,1513224793.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:13.257Z,1513224793.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:13.489Z,1513224793.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:13.659Z,1513224793.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:13.695Z,1513224793.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:14.019Z,1513224794.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:14.064Z,1513224794.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:14.288Z,1513224794.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:14.433Z,1513224794.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:14.460Z,1513224794.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:14.837Z,1513224794.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:14.871Z,1513224794.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:15.081Z,1513224795.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:15.237Z,1513224795.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:15.267Z,1513224795.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:15.485Z,1513224795.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:15.624Z,1513224795.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:15.656Z,1513224795.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:16.016Z,1513224796.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:16.032Z,1513224796.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:16.281Z,1513224796.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:16.424Z,1513224796.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:16.438Z,1513224796.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:16.860Z,1513224796.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:16.887Z,1513224796.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:17.077Z,1513224797.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:17.249Z,1513224797.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:17.292Z,1513224797.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:17.481Z,1513224797.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:17.637Z,1513224797.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:17.659Z,1513224797.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:18.042Z,1513224798.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:18.056Z,1513224798.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:18.277Z,1513224798.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:18.413Z,1513224798.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:18.479Z,1513224798.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:18.827Z,1513224798.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:18.843Z,1513224798.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:19.073Z,1513224799.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:19.238Z,1513224799.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:19.254Z,1513224799.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:19.477Z,1513224799.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:19.623Z,1513224799.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:19.645Z,1513224799.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:20.057Z,1513224800.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:20.102Z,1513224800.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:20.273Z,1513224800.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:20.443Z,1513224800.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:20.467Z,1513224800.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:20.855Z,1513224800.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:20.895Z,1513224800.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:21.069Z,1513224801.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:21.234Z,1513224801.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:21.257Z,1513224801.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:21.473Z,1513224801.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:21.623Z,1513224801.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:21.652Z,1513224801.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:22.013Z,1513224802.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:22.028Z,1513224802.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:22.269Z,1513224802.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:22.420Z,1513224802.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:22.454Z,1513224802.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:22.823Z,1513224802.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:22.856Z,1513224802.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:23.067Z,1513224803.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:23.232Z,1513224803.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:23.279Z,1513224803.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:23.481Z,1513224803.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:23.634Z,1513224803.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:23.659Z,1513224803.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:24.033Z,1513224804.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:24.062Z,1513224804.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:24.277Z,1513224804.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:24.416Z,1513224804.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:24.439Z,1513224804.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:24.822Z,1513224804.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:24.837Z,1513224804.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:25.075Z,1513224805.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:25.230Z,1513224805.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:25.244Z,1513224805.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:25.485Z,1513224805.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:25.630Z,1513224805.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:25.644Z,1513224805.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:26.028Z,1513224806.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:26.043Z,1513224806.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:26.281Z,1513224806.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:26.439Z,1513224806.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:26.479Z,1513224806.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:26.834Z,1513224806.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:26.848Z,1513224806.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:27.077Z,1513224807.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:27.232Z,1513224807.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:27.259Z,1513224807.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:27.481Z,1513224807.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:27.629Z,1513224807.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:27.644Z,1513224807.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:28.034Z,1513224808.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:28.051Z,1513224808.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:28.434Z,1513224808.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:28.448Z,1513224808.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:28.828Z,1513224808.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:28.848Z,1513224808.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:29.240Z,1513224809.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:29.255Z,1513224809.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:29.682Z,1513224809.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:29.707Z,1513224809.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:30.042Z,1513224810.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:30.085Z,1513224810.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:30.429Z,1513224810.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:30.445Z,1513224810.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:30.831Z,1513224810.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:30.939Z,1513224810.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:31.232Z,1513224811.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:31.252Z,1513224811.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:31.632Z,1513224811.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:31.780Z,1513224811.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:32.030Z,1513224812.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:32.051Z,1513224812.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:32.442Z,1513224812.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:32.488Z,1513224812.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:32.844Z,1513224812.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:32.893Z,1513224812.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:33.235Z,1513224813.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:33.250Z,1513224813.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:33.619Z,1513224813.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:33.647Z,1513224813.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:34.016Z,1513224814.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:34.051Z,1513224814.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:34.274Z,1513224814.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:34.419Z,1513224814.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:34.444Z,1513224814.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:34.844Z,1513224814.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:34.869Z,1513224814.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:35.069Z,1513224815.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:35.247Z,1513224815.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:35.262Z,1513224815.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:35.473Z,1513224815.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:35.643Z,1513224815.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:35.658Z,1513224815.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:36.057Z,1513224816.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:36.098Z,1513224816.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:36.269Z,1513224816.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:36.416Z,1513224816.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:36.451Z,1513224816.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:36.828Z,1513224816.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:36.860Z,1513224816.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:37.067Z,1513224817.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:37.227Z,1513224817.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:37.255Z,1513224817.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:37.479Z,1513224817.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:37.621Z,1513224817.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:37.659Z,1513224817.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:38.022Z,1513224818.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:38.049Z,1513224818.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:38.273Z,1513224818.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:38.446Z,1513224818.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:38.462Z,1513224818.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:38.845Z,1513224818.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:38.868Z,1513224818.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:39.071Z,1513224819.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:39.247Z,1513224819.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:39.294Z,1513224819.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:39.477Z,1513224819.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:39.624Z,1513224819.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:39.670Z,1513224819.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:40.016Z,1513224820.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:40.032Z,1513224820.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:40.274Z,1513224820.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:40.424Z,1513224820.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:40.440Z,1513224820.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:40.831Z,1513224820.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:40.891Z,1513224820.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:41.069Z,1513224821.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:41.242Z,1513224821.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:41.272Z,1513224821.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:41.473Z,1513224821.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:41.637Z,1513224821.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:41.666Z,1513224821.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:42.042Z,1513224822.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:42.086Z,1513224822.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:42.464Z,1513224822.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:42.488Z,1513224822.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:42.827Z,1513224822.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:42.871Z,1513224822.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:43.233Z,1513224823.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:43.248Z,1513224823.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:43.634Z,1513224823.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:43.649Z,1513224823.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:47.105Z,1513224827.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:47.136Z,1513224827.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:47.276Z,1513224827.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:47.291Z,1513224827.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:47.610Z,1513224827.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:47.674Z,1513224827.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:48.010Z,1513224828.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:48.036Z,1513224828.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:48.396Z,1513224828.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:48.412Z,1513224828.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:48.870Z,1513224828.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:48.935Z,1513224828.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:49.199Z,1513224829.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:49.247Z,1513224829.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:49.593Z,1513224829.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:49.608Z,1513224829.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:49.992Z,1513224829.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:50.007Z,1513224830.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:50.397Z,1513224830.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:50.412Z,1513224830.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:50.809Z,1513224830.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:50.824Z,1513224830.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:51.214Z,1513224831.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:51.249Z,1513224831.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:51.592Z,1513224831.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:51.608Z,1513224831.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:51.987Z,1513224831.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:52.003Z,1513224832.003 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T04:13:52.003Z,1513224832.003 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:13:52.003Z,1513224832.003 [BPC1](ERROR): Data Fault
2017-12-14T04:13:52.011Z,1513224832.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:52.026Z,1513224832.026 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:13:52.270Z,1513224832.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:52.383Z,1513224832.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:52.423Z,1513224832.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:52.836Z,1513224832.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:52.862Z,1513224832.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:53.067Z,1513224833.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:53.208Z,1513224833.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:53.223Z,1513224833.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:53.236Z,1513224833.236 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:13:53.253Z,1513224833.253 [BPC1] No Fault, FailCount= 1
2017-12-14T04:13:53.481Z,1513224833.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:53.604Z,1513224833.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:53.667Z,1513224833.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:54.010Z,1513224834.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:54.025Z,1513224834.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:54.277Z,1513224834.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:54.387Z,1513224834.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:54.413Z,1513224834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:54.783Z,1513224834.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:54.820Z,1513224834.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:55.073Z,1513224835.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:55.187Z,1513224835.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:55.243Z,1513224835.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:55.477Z,1513224835.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:55.585Z,1513224835.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:55.616Z,1513224835.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:55.987Z,1513224835.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:56.026Z,1513224836.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:56.388Z,1513224836.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:56.416Z,1513224836.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:56.802Z,1513224836.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:56.825Z,1513224836.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:57.201Z,1513224837.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:57.227Z,1513224837.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:57.589Z,1513224837.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:57.603Z,1513224837.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:57.988Z,1513224837.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:58.003Z,1513224838.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:58.423Z,1513224838.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:58.475Z,1513224838.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:58.799Z,1513224838.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:58.833Z,1513224838.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:59.201Z,1513224839.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:59.225Z,1513224839.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:13:59.605Z,1513224839.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:13:59.686Z,1513224839.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:00.005Z,1513224840.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:00.039Z,1513224840.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:00.388Z,1513224840.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:00.404Z,1513224840.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:00.790Z,1513224840.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:00.809Z,1513224840.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:01.190Z,1513224841.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:01.205Z,1513224841.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:01.609Z,1513224841.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:01.652Z,1513224841.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:01.992Z,1513224841.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:02.043Z,1513224842.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:02.398Z,1513224842.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:02.413Z,1513224842.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:02.844Z,1513224842.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:02.896Z,1513224842.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:03.203Z,1513224843.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:03.217Z,1513224843.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:03.596Z,1513224843.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:03.610Z,1513224843.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:03.996Z,1513224843.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:04.011Z,1513224844.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:04.393Z,1513224844.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:04.407Z,1513224844.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:04.837Z,1513224844.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:04.949Z,1513224844.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:05.211Z,1513224845.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:05.262Z,1513224845.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:05.606Z,1513224845.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:05.620Z,1513224845.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:06.005Z,1513224846.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:06.020Z,1513224846.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:06.302Z,1513224846.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:06.370Z,1513224846.370 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T04:14:06.370Z,1513224846.370 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T04:14:06.370Z,1513224846.370 [DropWeight](ERROR): Hardware Fault
2017-12-14T04:14:06.395Z,1513224846.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:06.427Z,1513224846.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:06.458Z,1513224846.458 [CBIT](INFO): Critical error at 20171214T041406
2017-12-14T04:14:06.465Z,1513224846.465 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T04:14:06.465Z,1513224846.465 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T04:14:06.786Z,1513224846.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:06.812Z,1513224846.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:06.823Z,1513224846.823 [CBIT](INFO): Critical error at 20171214T041406
2017-12-14T04:14:07.098Z,1513224847.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:07.183Z,1513224847.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:07.211Z,1513224847.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:07.501Z,1513224847.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:07.605Z,1513224847.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:07.620Z,1513224847.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:07.982Z,1513224847.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:08.009Z,1513224848.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:08.405Z,1513224848.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:08.452Z,1513224848.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:08.812Z,1513224848.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:08.828Z,1513224848.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:09.198Z,1513224849.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:09.227Z,1513224849.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:09.587Z,1513224849.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:09.614Z,1513224849.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:09.987Z,1513224849.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:10.013Z,1513224850.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:10.384Z,1513224850.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:10.418Z,1513224850.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:10.784Z,1513224850.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:10.834Z,1513224850.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:11.198Z,1513224851.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:11.225Z,1513224851.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:11.616Z,1513224851.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:11.643Z,1513224851.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:11.993Z,1513224851.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:12.032Z,1513224852.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:12.387Z,1513224852.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:12.423Z,1513224852.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:12.784Z,1513224852.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:12.808Z,1513224852.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:13.187Z,1513224853.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:13.207Z,1513224853.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:13.589Z,1513224853.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:13.604Z,1513224853.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:13.990Z,1513224853.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:14.065Z,1513224854.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:14.402Z,1513224854.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:14.417Z,1513224854.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:14.804Z,1513224854.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:14.876Z,1513224854.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:15.198Z,1513224855.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:15.220Z,1513224855.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:15.625Z,1513224855.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:15.684Z,1513224855.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:15.984Z,1513224855.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:16.015Z,1513224856.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:16.387Z,1513224856.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:16.412Z,1513224856.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:16.829Z,1513224856.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:16.882Z,1513224856.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:17.210Z,1513224857.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:17.232Z,1513224857.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:17.602Z,1513224857.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:17.631Z,1513224857.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:18.022Z,1513224858.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:18.076Z,1513224858.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:18.398Z,1513224858.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:18.427Z,1513224858.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:18.788Z,1513224858.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:18.802Z,1513224858.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:19.190Z,1513224859.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:19.231Z,1513224859.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:19.590Z,1513224859.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:19.606Z,1513224859.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:19.995Z,1513224859.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:20.010Z,1513224860.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:20.278Z,1513224860.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:20.391Z,1513224860.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:20.406Z,1513224860.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:20.798Z,1513224860.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:20.813Z,1513224860.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:21.075Z,1513224861.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:21.259Z,1513224861.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:21.291Z,1513224861.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:21.489Z,1513224861.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:21.583Z,1513224861.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:21.620Z,1513224861.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:21.995Z,1513224861.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:22.015Z,1513224862.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:22.287Z,1513224862.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:22.383Z,1513224862.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:22.411Z,1513224862.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:22.794Z,1513224862.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:22.842Z,1513224862.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:23.081Z,1513224863.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:23.202Z,1513224863.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:23.227Z,1513224863.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:23.485Z,1513224863.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:23.605Z,1513224863.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:23.631Z,1513224863.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:24.001Z,1513224864.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:24.067Z,1513224864.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:24.385Z,1513224864.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:24.432Z,1513224864.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:24.789Z,1513224864.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:24.829Z,1513224864.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:25.187Z,1513224865.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:25.218Z,1513224865.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:25.595Z,1513224865.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:25.610Z,1513224865.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:25.986Z,1513224865.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:26.015Z,1513224866.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:26.407Z,1513224866.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:26.422Z,1513224866.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:26.806Z,1513224866.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:26.822Z,1513224866.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:27.198Z,1513224867.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:27.227Z,1513224867.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:27.612Z,1513224867.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:27.670Z,1513224867.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:27.983Z,1513224867.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:28.003Z,1513224868.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:28.392Z,1513224868.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:28.407Z,1513224868.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:28.792Z,1513224868.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:28.837Z,1513224868.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:29.205Z,1513224869.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:29.239Z,1513224869.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:29.597Z,1513224869.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:29.612Z,1513224869.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:30.004Z,1513224870.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:30.018Z,1513224870.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:30.386Z,1513224870.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:30.411Z,1513224870.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:30.827Z,1513224870.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:30.866Z,1513224870.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:31.206Z,1513224871.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:31.232Z,1513224871.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:31.594Z,1513224871.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:31.609Z,1513224871.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:31.989Z,1513224871.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:32.016Z,1513224872.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:32.402Z,1513224872.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:32.423Z,1513224872.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:32.803Z,1513224872.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:32.823Z,1513224872.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:33.203Z,1513224873.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:33.217Z,1513224873.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:33.591Z,1513224873.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:33.609Z,1513224873.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:33.986Z,1513224873.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:34.015Z,1513224874.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:34.278Z,1513224874.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:34.383Z,1513224874.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:34.410Z,1513224874.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:34.801Z,1513224874.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:34.820Z,1513224874.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:35.075Z,1513224875.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:35.195Z,1513224875.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:35.221Z,1513224875.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:35.489Z,1513224875.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:35.606Z,1513224875.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:35.621Z,1513224875.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:35.993Z,1513224875.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:36.069Z,1513224876.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:36.285Z,1513224876.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:36.379Z,1513224876.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:36.410Z,1513224876.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:36.798Z,1513224876.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:36.859Z,1513224876.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:37.081Z,1513224877.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:37.206Z,1513224877.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:37.230Z,1513224877.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:37.488Z,1513224877.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:37.580Z,1513224877.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:37.674Z,1513224877.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:37.994Z,1513224877.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:38.016Z,1513224878.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:38.399Z,1513224878.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:38.418Z,1513224878.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:38.806Z,1513224878.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:38.821Z,1513224878.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:39.206Z,1513224879.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:39.220Z,1513224879.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:39.583Z,1513224879.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:39.610Z,1513224879.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:39.976Z,1513224879.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:40.000Z,1513224880.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:40.406Z,1513224880.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:40.435Z,1513224880.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:40.784Z,1513224880.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:40.826Z,1513224880.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:41.207Z,1513224881.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:41.227Z,1513224881.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:41.614Z,1513224881.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:41.629Z,1513224881.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:42.004Z,1513224882.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:42.018Z,1513224882.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:42.380Z,1513224882.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:42.404Z,1513224882.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:42.786Z,1513224882.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:42.830Z,1513224882.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:43.187Z,1513224883.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:43.219Z,1513224883.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:43.606Z,1513224883.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:43.641Z,1513224883.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:44.004Z,1513224884.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:44.027Z,1513224884.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:47.479Z,1513224887.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:47.534Z,1513224887.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:47.645Z,1513224887.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:47.681Z,1513224887.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:47.994Z,1513224887.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:48.038Z,1513224888.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:48.294Z,1513224888.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:48.387Z,1513224888.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:48.402Z,1513224888.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:48.782Z,1513224888.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:48.796Z,1513224888.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:49.094Z,1513224889.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:49.183Z,1513224889.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:49.203Z,1513224889.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:49.501Z,1513224889.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:49.591Z,1513224889.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:49.607Z,1513224889.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:49.998Z,1513224889.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:50.045Z,1513224890.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:50.298Z,1513224890.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:50.405Z,1513224890.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:50.432Z,1513224890.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:50.801Z,1513224890.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:50.827Z,1513224890.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:51.093Z,1513224891.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:51.202Z,1513224891.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:51.227Z,1513224891.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:51.497Z,1513224891.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:51.595Z,1513224891.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:51.626Z,1513224891.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:51.991Z,1513224891.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:52.006Z,1513224892.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:52.400Z,1513224892.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:52.430Z,1513224892.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:52.792Z,1513224892.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:52.815Z,1513224892.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:53.241Z,1513224893.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:53.290Z,1513224893.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:53.602Z,1513224893.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:53.617Z,1513224893.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:53.998Z,1513224893.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:54.019Z,1513224894.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:54.386Z,1513224894.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:54.400Z,1513224894.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:54.792Z,1513224894.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:54.815Z,1513224894.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:55.199Z,1513224895.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:55.214Z,1513224895.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:55.595Z,1513224895.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:55.609Z,1513224895.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:55.999Z,1513224895.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:56.026Z,1513224896.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:56.407Z,1513224896.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:56.422Z,1513224896.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:56.819Z,1513224896.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:56.834Z,1513224896.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:57.206Z,1513224897.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:57.226Z,1513224897.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:57.584Z,1513224897.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:57.620Z,1513224897.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:57.992Z,1513224897.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:58.020Z,1513224898.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:58.390Z,1513224898.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:58.417Z,1513224898.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:58.845Z,1513224898.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:58.884Z,1513224898.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:59.203Z,1513224899.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:59.234Z,1513224899.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:14:59.610Z,1513224899.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:14:59.718Z,1513224899.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:00.002Z,1513224900.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:00.064Z,1513224900.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:00.380Z,1513224900.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:00.395Z,1513224900.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:00.784Z,1513224900.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:00.819Z,1513224900.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:01.187Z,1513224901.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:01.247Z,1513224901.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:01.591Z,1513224901.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:01.630Z,1513224901.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:01.984Z,1513224901.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:02.035Z,1513224902.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:02.278Z,1513224902.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:02.401Z,1513224902.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:02.423Z,1513224902.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:02.801Z,1513224902.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:02.824Z,1513224902.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:03.075Z,1513224903.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:03.198Z,1513224903.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:03.227Z,1513224903.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:03.485Z,1513224903.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:03.589Z,1513224903.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:03.623Z,1513224903.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:04.003Z,1513224904.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:04.077Z,1513224904.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:04.281Z,1513224904.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:04.391Z,1513224904.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:04.434Z,1513224904.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:04.798Z,1513224904.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:04.829Z,1513224904.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:05.077Z,1513224905.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:05.206Z,1513224905.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:05.233Z,1513224905.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:05.481Z,1513224905.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:05.601Z,1513224905.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:05.635Z,1513224905.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:06.003Z,1513224906.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:06.033Z,1513224906.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:06.394Z,1513224906.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:06.409Z,1513224906.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:06.788Z,1513224906.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:06.852Z,1513224906.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:07.189Z,1513224907.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:07.204Z,1513224907.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:07.589Z,1513224907.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:07.616Z,1513224907.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:07.979Z,1513224907.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:08.008Z,1513224908.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:08.405Z,1513224908.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:08.436Z,1513224908.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:08.799Z,1513224908.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:08.818Z,1513224908.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:09.198Z,1513224909.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:09.212Z,1513224909.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:09.588Z,1513224909.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:09.614Z,1513224909.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:10.033Z,1513224910.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:10.106Z,1513224910.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:10.106Z,1513224910.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2017-12-14T04:15:10.106Z,1513224910.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:15:10.108Z,1513224910.108 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:10.108Z,1513224910.108 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2017-12-14T04:15:10.108Z,1513224910.108 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:15:10.115Z,1513224910.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:10.115Z,1513224910.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2017-12-14T04:15:10.116Z,1513224910.116 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:15:10.182Z,1513224910.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:15:10.182Z,1513224910.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:15:10.183Z,1513224910.183 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:15:10.390Z,1513224910.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:10.438Z,1513224910.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:15:10.438Z,1513224910.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2017-12-14T04:15:10.439Z,1513224910.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:15:10.439Z,1513224910.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2017-12-14T04:15:10.439Z,1513224910.439 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:15:10.439Z,1513224910.439 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2017-12-14T04:15:10.790Z,1513224910.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:10.816Z,1513224910.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:15:10.816Z,1513224910.816 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:15:10.821Z,1513224910.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:15:10.821Z,1513224910.821 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:15:10.822Z,1513224910.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:15:10.822Z,1513224910.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:15:10.822Z,1513224910.822 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:15:10.823Z,1513224910.823 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:15:10.823Z,1513224910.823 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:15:11.211Z,1513224911.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:11.226Z,1513224911.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:11.607Z,1513224911.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:11.622Z,1513224911.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:12.004Z,1513224912.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:12.019Z,1513224912.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:12.382Z,1513224912.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:12.420Z,1513224912.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:12.838Z,1513224912.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:12.864Z,1513224912.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:13.188Z,1513224913.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:13.220Z,1513224913.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:13.602Z,1513224913.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:13.617Z,1513224913.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:13.991Z,1513224913.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:14.006Z,1513224914.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:14.400Z,1513224914.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:14.416Z,1513224914.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:14.800Z,1513224914.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:14.824Z,1513224914.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:15.196Z,1513224915.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:15.267Z,1513224915.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:15.594Z,1513224915.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:15.630Z,1513224915.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:15.984Z,1513224915.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:16.010Z,1513224916.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:16.415Z,1513224916.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:16.455Z,1513224916.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:16.783Z,1513224916.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:16.808Z,1513224916.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:17.202Z,1513224917.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:17.217Z,1513224917.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:17.610Z,1513224917.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:17.625Z,1513224917.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:18.007Z,1513224918.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:18.023Z,1513224918.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:18.384Z,1513224918.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:18.410Z,1513224918.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:18.784Z,1513224918.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:18.816Z,1513224918.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:19.182Z,1513224919.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:19.214Z,1513224919.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:19.605Z,1513224919.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:19.670Z,1513224919.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:19.983Z,1513224919.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:20.015Z,1513224920.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:20.414Z,1513224920.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:20.435Z,1513224920.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:20.808Z,1513224920.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:20.823Z,1513224920.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:21.206Z,1513224921.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:21.221Z,1513224921.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:21.583Z,1513224921.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:21.615Z,1513224921.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:21.986Z,1513224921.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:22.041Z,1513224922.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:22.385Z,1513224922.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:22.421Z,1513224922.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:22.818Z,1513224922.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:22.876Z,1513224922.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:23.221Z,1513224923.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:23.236Z,1513224923.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:23.607Z,1513224923.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:23.669Z,1513224923.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:24.005Z,1513224924.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:24.020Z,1513224924.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:24.389Z,1513224924.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:24.419Z,1513224924.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:24.822Z,1513224924.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:24.845Z,1513224924.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:25.185Z,1513224925.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:25.199Z,1513224925.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:25.588Z,1513224925.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:25.603Z,1513224925.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:25.983Z,1513224925.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:26.043Z,1513224926.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:26.400Z,1513224926.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:26.420Z,1513224926.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:26.851Z,1513224926.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:26.865Z,1513224926.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:27.200Z,1513224927.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:27.227Z,1513224927.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:27.593Z,1513224927.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:27.607Z,1513224927.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:27.990Z,1513224927.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:28.017Z,1513224928.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:28.395Z,1513224928.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:28.411Z,1513224928.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:28.786Z,1513224928.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:28.816Z,1513224928.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:29.204Z,1513224929.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:29.243Z,1513224929.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:29.597Z,1513224929.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:29.628Z,1513224929.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:29.995Z,1513224929.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:30.016Z,1513224930.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:30.395Z,1513224930.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:30.411Z,1513224930.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:30.795Z,1513224930.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:30.815Z,1513224930.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:31.185Z,1513224931.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:31.216Z,1513224931.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:31.596Z,1513224931.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:31.610Z,1513224931.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:31.986Z,1513224931.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:32.046Z,1513224932.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:32.415Z,1513224932.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:32.443Z,1513224932.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:32.808Z,1513224932.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:32.825Z,1513224932.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:33.202Z,1513224933.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:33.222Z,1513224933.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:33.586Z,1513224933.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:33.613Z,1513224933.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:33.990Z,1513224933.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:34.018Z,1513224934.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:34.389Z,1513224934.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:34.423Z,1513224934.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:34.789Z,1513224934.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:34.831Z,1513224934.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:35.211Z,1513224935.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:35.226Z,1513224935.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:35.623Z,1513224935.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:35.670Z,1513224935.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:36.002Z,1513224936.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:36.033Z,1513224936.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:36.393Z,1513224936.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:36.408Z,1513224936.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:36.787Z,1513224936.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:36.811Z,1513224936.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:37.184Z,1513224937.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:37.215Z,1513224937.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:37.583Z,1513224937.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:37.609Z,1513224937.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:37.981Z,1513224937.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:38.018Z,1513224938.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:38.407Z,1513224938.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:38.422Z,1513224938.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:38.819Z,1513224938.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:38.865Z,1513224938.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:39.202Z,1513224939.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:39.218Z,1513224939.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:39.583Z,1513224939.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:39.619Z,1513224939.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:39.987Z,1513224939.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:40.014Z,1513224940.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:40.386Z,1513224940.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:40.421Z,1513224940.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:40.826Z,1513224940.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:40.869Z,1513224940.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:41.218Z,1513224941.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:41.233Z,1513224941.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:41.598Z,1513224941.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:41.625Z,1513224941.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:42.012Z,1513224942.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:42.040Z,1513224942.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:42.390Z,1513224942.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:42.446Z,1513224942.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:42.784Z,1513224942.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:42.807Z,1513224942.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:43.192Z,1513224943.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:43.231Z,1513224943.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:43.591Z,1513224943.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:43.607Z,1513224943.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:43.990Z,1513224943.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:44.063Z,1513224944.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:44.406Z,1513224944.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:44.437Z,1513224944.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:47.947Z,1513224947.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:47.989Z,1513224947.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:48.115Z,1513224948.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:48.147Z,1513224948.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:48.446Z,1513224948.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:48.507Z,1513224948.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:48.848Z,1513224948.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:48.861Z,1513224948.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T04:15:48.889Z,1513224948.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:49.246Z,1513224949.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:49.294Z,1513224949.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:49.639Z,1513224949.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:49.660Z,1513224949.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:50.047Z,1513224950.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:50.068Z,1513224950.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:50.452Z,1513224950.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:50.471Z,1513224950.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:50.861Z,1513224950.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:50.903Z,1513224950.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:51.249Z,1513224951.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:51.264Z,1513224951.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:51.652Z,1513224951.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:51.706Z,1513224951.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:52.042Z,1513224952.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:52.092Z,1513224952.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:52.445Z,1513224952.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:52.471Z,1513224952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:52.844Z,1513224952.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:52.859Z,1513224952.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:53.254Z,1513224953.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:53.294Z,1513224953.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:53.657Z,1513224953.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:53.672Z,1513224953.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:54.049Z,1513224954.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:54.097Z,1513224954.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:54.442Z,1513224954.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:54.457Z,1513224954.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:54.885Z,1513224954.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:54.900Z,1513224954.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:55.242Z,1513224955.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:55.274Z,1513224955.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:55.636Z,1513224955.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:55.700Z,1513224955.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:56.049Z,1513224956.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:56.064Z,1513224956.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:56.454Z,1513224956.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:56.477Z,1513224956.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:56.864Z,1513224956.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:56.923Z,1513224956.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:57.260Z,1513224957.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:57.302Z,1513224957.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:57.647Z,1513224957.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:57.670Z,1513224957.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:58.055Z,1513224958.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:58.110Z,1513224958.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:58.436Z,1513224958.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:58.475Z,1513224958.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:58.846Z,1513224958.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:58.867Z,1513224958.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:59.260Z,1513224959.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:59.283Z,1513224959.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:15:59.666Z,1513224959.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:15:59.682Z,1513224959.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:00.046Z,1513224960.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:00.075Z,1513224960.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:00.448Z,1513224960.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:00.501Z,1513224960.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:00.835Z,1513224960.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:00.862Z,1513224960.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:01.275Z,1513224961.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:01.319Z,1513224961.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:01.644Z,1513224961.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:01.689Z,1513224961.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:02.057Z,1513224962.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:02.091Z,1513224962.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:02.450Z,1513224962.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:02.464Z,1513224962.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:02.860Z,1513224962.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:02.886Z,1513224962.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:03.234Z,1513224963.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:03.272Z,1513224963.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:03.648Z,1513224963.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:03.700Z,1513224963.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:04.046Z,1513224964.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:04.069Z,1513224964.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:04.488Z,1513224964.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:04.508Z,1513224964.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:04.864Z,1513224964.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:04.880Z,1513224964.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:05.258Z,1513224965.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:05.302Z,1513224965.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:05.649Z,1513224965.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:05.664Z,1513224965.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:06.047Z,1513224966.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:06.071Z,1513224966.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:06.436Z,1513224966.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:06.473Z,1513224966.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:06.834Z,1513224966.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:06.867Z,1513224966.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:07.250Z,1513224967.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:07.284Z,1513224967.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:07.668Z,1513224967.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:07.736Z,1513224967.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:08.046Z,1513224968.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:08.073Z,1513224968.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:08.435Z,1513224968.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:08.490Z,1513224968.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:08.844Z,1513224968.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:08.886Z,1513224968.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:09.246Z,1513224969.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:09.287Z,1513224969.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:09.637Z,1513224969.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:09.678Z,1513224969.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:10.053Z,1513224970.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:10.091Z,1513224970.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:10.453Z,1513224970.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:10.479Z,1513224970.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:10.886Z,1513224970.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:10.913Z,1513224970.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:11.242Z,1513224971.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:11.290Z,1513224971.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:11.644Z,1513224971.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:11.671Z,1513224971.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:12.050Z,1513224972.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:12.058Z,1513224972.058 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:16:12.058Z,1513224972.058 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:16:12.058Z,1513224972.058 [BPC1](ERROR): Communications Fault
2017-12-14T04:16:12.066Z,1513224972.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:12.123Z,1513224972.123 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:16:12.453Z,1513224972.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:12.476Z,1513224972.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:12.864Z,1513224972.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:12.898Z,1513224972.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:13.249Z,1513224973.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:13.296Z,1513224973.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:13.310Z,1513224973.310 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:16:13.310Z,1513224973.310 [BPC1] No Fault, FailCount= 1
2017-12-14T04:16:13.642Z,1513224973.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:13.727Z,1513224973.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:14.054Z,1513224974.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:14.075Z,1513224974.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:14.466Z,1513224974.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:14.480Z,1513224974.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:14.862Z,1513224974.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:14.892Z,1513224974.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:15.242Z,1513224975.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:15.277Z,1513224975.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:15.632Z,1513224975.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:15.668Z,1513224975.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:16.047Z,1513224976.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:16.083Z,1513224976.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:16.465Z,1513224976.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:16.494Z,1513224976.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:16.850Z,1513224976.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:16.883Z,1513224976.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:17.267Z,1513224977.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:17.306Z,1513224977.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:17.645Z,1513224977.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:17.667Z,1513224977.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:18.053Z,1513224978.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:18.100Z,1513224978.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:18.456Z,1513224978.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:18.479Z,1513224978.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:18.856Z,1513224978.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:18.878Z,1513224978.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:19.252Z,1513224979.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:19.270Z,1513224979.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:19.636Z,1513224979.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:19.703Z,1513224979.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:20.063Z,1513224980.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:20.114Z,1513224980.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:20.467Z,1513224980.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:20.531Z,1513224980.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:20.898Z,1513224980.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:20.943Z,1513224980.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:21.247Z,1513224981.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:21.291Z,1513224981.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:21.643Z,1513224981.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:21.663Z,1513224981.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:22.050Z,1513224982.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:22.115Z,1513224982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:22.456Z,1513224982.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:22.496Z,1513224982.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:22.864Z,1513224982.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:22.939Z,1513224982.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:23.243Z,1513224983.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:23.295Z,1513224983.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:23.645Z,1513224983.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:23.674Z,1513224983.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:24.056Z,1513224984.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:24.111Z,1513224984.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:24.456Z,1513224984.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:24.550Z,1513224984.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:24.860Z,1513224984.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:24.926Z,1513224984.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:25.238Z,1513224985.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:25.282Z,1513224985.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:25.658Z,1513224985.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:25.702Z,1513224985.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:26.056Z,1513224986.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:26.104Z,1513224986.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:26.452Z,1513224986.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:26.501Z,1513224986.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:26.852Z,1513224986.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:26.903Z,1513224986.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:27.235Z,1513224987.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:27.272Z,1513224987.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:27.642Z,1513224987.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:27.695Z,1513224987.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:28.047Z,1513224988.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:28.063Z,1513224988.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:28.467Z,1513224988.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:28.501Z,1513224988.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:28.852Z,1513224988.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:28.888Z,1513224988.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:29.266Z,1513224989.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:29.297Z,1513224989.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:29.656Z,1513224989.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:29.694Z,1513224989.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:30.043Z,1513224990.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:30.102Z,1513224990.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:30.465Z,1513224990.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:30.492Z,1513224990.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:30.866Z,1513224990.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:30.899Z,1513224990.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:31.255Z,1513224991.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:31.304Z,1513224991.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:31.677Z,1513224991.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:31.711Z,1513224991.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:32.059Z,1513224992.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:32.099Z,1513224992.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:32.454Z,1513224992.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:32.535Z,1513224992.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:32.847Z,1513224992.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:32.915Z,1513224992.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:33.242Z,1513224993.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:33.295Z,1513224993.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:33.640Z,1513224993.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:33.763Z,1513224993.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:34.036Z,1513224994.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:34.109Z,1513224994.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:34.447Z,1513224994.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:34.512Z,1513224994.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:34.872Z,1513224994.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:34.919Z,1513224994.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:35.251Z,1513224995.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:35.294Z,1513224995.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:35.636Z,1513224995.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:35.691Z,1513224995.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:36.036Z,1513224996.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:36.080Z,1513224996.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:36.441Z,1513224996.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:36.497Z,1513224996.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:36.840Z,1513224996.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:36.976Z,1513224996.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:37.256Z,1513224997.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:37.295Z,1513224997.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:37.652Z,1513224997.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:37.692Z,1513224997.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:38.047Z,1513224998.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:38.119Z,1513224998.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:38.437Z,1513224998.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:38.489Z,1513224998.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:38.840Z,1513224998.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:38.888Z,1513224998.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:39.251Z,1513224999.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:39.307Z,1513224999.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:39.643Z,1513224999.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:39.695Z,1513224999.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:40.051Z,1513225000.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:40.099Z,1513225000.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:40.451Z,1513225000.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:40.505Z,1513225000.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:40.847Z,1513225000.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:40.887Z,1513225000.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:41.237Z,1513225001.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:41.252Z,1513225001.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:41.636Z,1513225001.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:41.672Z,1513225001.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:42.050Z,1513225002.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:42.090Z,1513225002.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:42.459Z,1513225002.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:42.480Z,1513225002.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:42.854Z,1513225002.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:42.911Z,1513225002.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:43.235Z,1513225003.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:43.269Z,1513225003.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:43.634Z,1513225003.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:43.675Z,1513225003.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:43.685Z,1513225003.685 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:11:43.6Z
2017-12-14T04:16:43.685Z,1513225003.685 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:16:43.686Z,1513225003.686 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:16:44.057Z,1513225004.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:44.078Z,1513225004.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:44.911Z,1513225004.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:44.926Z,1513225004.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:48.078Z,1513225008.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:48.093Z,1513225008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:48.169Z,1513225008.169 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20171214T002839/Courier0088.lzma
2017-12-14T04:16:48.190Z,1513225008.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:48.232Z,1513225008.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:48.570Z,1513225008.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:48.586Z,1513225008.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:48.939Z,1513225008.939 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0088.lzma.bak
2017-12-14T04:16:48.939Z,1513225008.939 [DataOverHttps](INFO): SBD MOMSN=5437619
2017-12-14T04:16:48.978Z,1513225008.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:48.000Z,1513225009.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:50.225Z,1513225010.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:50.246Z,1513225010.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:50.349Z,1513225010.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:50.390Z,1513225010.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:54.220Z,1513225014.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:54.314Z,1513225014.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:54.422Z,1513225014.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:54.465Z,1513225014.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:54.782Z,1513225014.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:54.797Z,1513225014.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:55.167Z,1513225015.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:55.231Z,1513225015.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:55.566Z,1513225015.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:55.597Z,1513225015.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:55.966Z,1513225015.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:56.036Z,1513225016.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:59.591Z,1513225019.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:59.608Z,1513225019.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:16:59.693Z,1513225019.693 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0089.lzma
2017-12-14T04:16:59.737Z,1513225019.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:16:59.756Z,1513225019.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:00.094Z,1513225020.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:00.109Z,1513225020.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:00.457Z,1513225020.457 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0089.lzma.bak
2017-12-14T04:17:00.458Z,1513225020.458 [DataOverHttps](INFO): SBD MOMSN=5437624
2017-12-14T04:17:00.502Z,1513225020.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:00.516Z,1513225020.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:22.931Z,1513225042.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:22.994Z,1513225042.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:22.997Z,1513225042.997 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:17:22.997Z,1513225042.997 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:17:22.997Z,1513225042.997 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:17:23.124Z,1513225043.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:23.175Z,1513225043.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:26.678Z,1513225046.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:26.775Z,1513225046.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:26.874Z,1513225046.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:26.896Z,1513225046.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:27.262Z,1513225047.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:27.320Z,1513225047.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:27.656Z,1513225047.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:27.688Z,1513225047.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:28.044Z,1513225048.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:28.068Z,1513225048.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:28.451Z,1513225048.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:28.496Z,1513225048.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:28.852Z,1513225048.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:28.889Z,1513225048.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:29.254Z,1513225049.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:29.277Z,1513225049.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:29.676Z,1513225049.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:29.730Z,1513225049.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:30.058Z,1513225050.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:30.097Z,1513225050.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:30.450Z,1513225050.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:30.478Z,1513225050.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:30.849Z,1513225050.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:30.875Z,1513225050.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:31.258Z,1513225051.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:31.274Z,1513225051.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:31.668Z,1513225051.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:31.715Z,1513225051.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:32.053Z,1513225052.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:32.092Z,1513225052.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:32.470Z,1513225052.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:32.493Z,1513225052.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:32.860Z,1513225052.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:32.912Z,1513225052.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:33.251Z,1513225053.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:33.296Z,1513225053.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:33.656Z,1513225053.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:33.679Z,1513225053.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:34.061Z,1513225054.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:34.126Z,1513225054.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:34.466Z,1513225054.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:34.480Z,1513225054.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:34.862Z,1513225054.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:34.898Z,1513225054.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:35.250Z,1513225055.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:35.280Z,1513225055.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:35.658Z,1513225055.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:35.678Z,1513225055.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:36.081Z,1513225056.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:36.121Z,1513225056.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:36.466Z,1513225056.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:36.504Z,1513225056.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:36.868Z,1513225056.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:36.887Z,1513225056.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:37.268Z,1513225057.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:37.310Z,1513225057.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:37.643Z,1513225057.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:37.685Z,1513225057.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:38.065Z,1513225058.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:38.086Z,1513225058.086 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:17:38.086Z,1513225058.086 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:17:38.086Z,1513225058.086 [BPC1](ERROR): Communications Fault
2017-12-14T04:17:38.094Z,1513225058.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:38.139Z,1513225058.139 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:17:38.476Z,1513225058.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:38.492Z,1513225058.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:38.871Z,1513225058.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:38.886Z,1513225058.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:39.273Z,1513225059.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:39.313Z,1513225059.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:39.352Z,1513225059.352 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:17:39.361Z,1513225059.361 [BPC1] No Fault, FailCount= 1
2017-12-14T04:17:39.648Z,1513225059.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:39.739Z,1513225059.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:40.077Z,1513225060.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:40.093Z,1513225060.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:40.470Z,1513225060.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:40.495Z,1513225060.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:40.867Z,1513225060.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:40.882Z,1513225060.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:41.244Z,1513225061.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:41.289Z,1513225061.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:41.641Z,1513225061.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:41.698Z,1513225061.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:42.054Z,1513225062.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:42.095Z,1513225062.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:42.484Z,1513225062.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:42.511Z,1513225062.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:42.888Z,1513225062.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:42.903Z,1513225062.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:43.248Z,1513225063.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:43.294Z,1513225063.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:43.648Z,1513225063.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:43.686Z,1513225063.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:44.070Z,1513225064.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:44.085Z,1513225064.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:44.468Z,1513225064.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:44.492Z,1513225064.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:44.854Z,1513225064.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:44.895Z,1513225064.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:45.247Z,1513225065.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:45.277Z,1513225065.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:45.680Z,1513225065.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:45.709Z,1513225065.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:46.065Z,1513225066.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:46.099Z,1513225066.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:46.461Z,1513225066.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:46.487Z,1513225066.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:46.866Z,1513225066.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:46.906Z,1513225066.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:47.251Z,1513225067.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:47.278Z,1513225067.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:47.650Z,1513225067.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:47.693Z,1513225067.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:48.057Z,1513225068.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:48.108Z,1513225068.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:48.460Z,1513225068.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:48.479Z,1513225068.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:48.877Z,1513225068.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:48.907Z,1513225068.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:49.252Z,1513225069.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:49.298Z,1513225069.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:49.654Z,1513225069.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:49.678Z,1513225069.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:50.059Z,1513225070.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:50.078Z,1513225070.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:50.461Z,1513225070.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:50.475Z,1513225070.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:50.857Z,1513225070.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:50.897Z,1513225070.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:51.245Z,1513225071.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:51.281Z,1513225071.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:51.650Z,1513225071.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:51.673Z,1513225071.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:52.064Z,1513225072.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:52.131Z,1513225072.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:52.465Z,1513225072.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:52.503Z,1513225072.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:52.862Z,1513225072.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:52.884Z,1513225072.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:53.253Z,1513225073.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:53.284Z,1513225073.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:53.665Z,1513225073.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:53.683Z,1513225073.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:54.061Z,1513225074.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:54.091Z,1513225074.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:54.466Z,1513225074.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:54.488Z,1513225074.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:54.879Z,1513225074.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:54.894Z,1513225074.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:55.274Z,1513225075.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:55.313Z,1513225075.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:55.648Z,1513225075.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:55.689Z,1513225075.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:56.061Z,1513225076.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:56.099Z,1513225076.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:56.479Z,1513225076.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:56.499Z,1513225076.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:56.862Z,1513225076.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:56.884Z,1513225076.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:57.250Z,1513225077.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:57.289Z,1513225077.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:57.649Z,1513225077.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:57.663Z,1513225077.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:58.066Z,1513225078.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:58.095Z,1513225078.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:58.468Z,1513225078.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:58.493Z,1513225078.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:58.853Z,1513225078.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:58.923Z,1513225078.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:59.249Z,1513225079.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:59.279Z,1513225079.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:17:59.652Z,1513225079.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:17:59.675Z,1513225079.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:00.062Z,1513225080.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:00.108Z,1513225080.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:00.462Z,1513225080.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:00.502Z,1513225080.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:00.860Z,1513225080.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:00.919Z,1513225080.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:01.247Z,1513225081.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:01.285Z,1513225081.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:01.668Z,1513225081.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:01.731Z,1513225081.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:02.066Z,1513225082.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:02.110Z,1513225082.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:02.464Z,1513225082.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:02.635Z,1513225082.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:02.871Z,1513225082.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:02.886Z,1513225082.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:03.271Z,1513225083.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:03.287Z,1513225083.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:03.643Z,1513225083.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:03.667Z,1513225083.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:04.072Z,1513225084.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:04.090Z,1513225084.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:04.476Z,1513225084.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:04.491Z,1513225084.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:04.910Z,1513225084.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:04.936Z,1513225084.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:05.244Z,1513225085.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:05.368Z,1513225085.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:05.726Z,1513225085.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:05.759Z,1513225085.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:06.071Z,1513225086.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:06.091Z,1513225086.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:06.469Z,1513225086.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:06.492Z,1513225086.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:06.863Z,1513225086.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:06.895Z,1513225086.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:07.244Z,1513225087.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:07.278Z,1513225087.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:07.654Z,1513225087.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:07.677Z,1513225087.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:08.075Z,1513225088.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:08.095Z,1513225088.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:08.466Z,1513225088.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:08.492Z,1513225088.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:08.863Z,1513225088.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:08.887Z,1513225088.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:09.243Z,1513225089.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:09.278Z,1513225089.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:09.643Z,1513225089.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:09.675Z,1513225089.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.066Z,1513225090.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:10.131Z,1513225090.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.476Z,1513225090.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:10.482Z,1513225090.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x16955 got:0x2840
2017-12-14T04:18:10.522Z,1513225090.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.868Z,1513225090.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:10.891Z,1513225090.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.891Z,1513225090.891 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2017-12-14T04:18:10.891Z,1513225090.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:18:10.893Z,1513225090.893 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.893Z,1513225090.893 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2017-12-14T04:18:10.893Z,1513225090.893 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:18:10.895Z,1513225090.895 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:10.895Z,1513225090.895 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2017-12-14T04:18:10.925Z,1513225090.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:18:10.960Z,1513225090.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:18:10.961Z,1513225090.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:18:10.961Z,1513225090.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:18:11.271Z,1513225091.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:11.296Z,1513225091.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:18:11.296Z,1513225091.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2017-12-14T04:18:11.297Z,1513225091.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:18:11.297Z,1513225091.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2017-12-14T04:18:11.297Z,1513225091.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:18:11.298Z,1513225091.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2017-12-14T04:18:11.648Z,1513225091.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:11.689Z,1513225091.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:18:11.690Z,1513225091.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:18:11.690Z,1513225091.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:18:11.690Z,1513225091.690 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:18:11.691Z,1513225091.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:18:11.691Z,1513225091.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:18:11.691Z,1513225091.691 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:18:11.692Z,1513225091.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:18:11.692Z,1513225091.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:18:12.061Z,1513225092.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:12.090Z,1513225092.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:12.470Z,1513225092.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:12.493Z,1513225092.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:12.867Z,1513225092.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:12.889Z,1513225092.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:13.251Z,1513225093.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:13.295Z,1513225093.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:13.648Z,1513225093.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:13.692Z,1513225093.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:14.072Z,1513225094.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:14.095Z,1513225094.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:14.498Z,1513225094.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:14.555Z,1513225094.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:14.870Z,1513225094.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:14.908Z,1513225094.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:15.250Z,1513225095.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:15.290Z,1513225095.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:15.651Z,1513225095.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:15.672Z,1513225095.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:16.070Z,1513225096.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:16.094Z,1513225096.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:16.457Z,1513225096.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:16.502Z,1513225096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:16.853Z,1513225096.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:16.873Z,1513225096.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:17.253Z,1513225097.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:17.275Z,1513225097.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:17.669Z,1513225097.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:17.707Z,1513225097.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:18.092Z,1513225098.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:18.108Z,1513225098.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:18.474Z,1513225098.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:18.505Z,1513225098.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:18.860Z,1513225098.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:18.879Z,1513225098.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:19.266Z,1513225099.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:19.281Z,1513225099.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:19.648Z,1513225099.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:19.691Z,1513225099.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:20.063Z,1513225100.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:20.092Z,1513225100.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:20.476Z,1513225100.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:20.499Z,1513225100.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:20.883Z,1513225100.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:20.932Z,1513225100.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:21.260Z,1513225101.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:21.307Z,1513225101.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:21.642Z,1513225101.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:21.696Z,1513225101.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:22.076Z,1513225102.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:22.091Z,1513225102.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:22.472Z,1513225102.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:22.548Z,1513225102.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:22.853Z,1513225102.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:22.889Z,1513225102.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:23.251Z,1513225103.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:23.285Z,1513225103.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:23.663Z,1513225103.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:23.729Z,1513225103.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:27.458Z,1513225107.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:27.496Z,1513225107.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:27.594Z,1513225107.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:27.655Z,1513225107.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:27.965Z,1513225107.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:27.995Z,1513225107.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:28.352Z,1513225108.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:28.366Z,1513225108.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:28.766Z,1513225108.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:28.828Z,1513225108.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:29.148Z,1513225109.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:29.175Z,1513225109.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:29.543Z,1513225109.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:29.570Z,1513225109.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:29.943Z,1513225109.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:29.975Z,1513225109.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:30.359Z,1513225110.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:30.378Z,1513225110.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:30.768Z,1513225110.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:30.787Z,1513225110.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:31.167Z,1513225111.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:31.182Z,1513225111.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:31.543Z,1513225111.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:31.595Z,1513225111.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:31.947Z,1513225111.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:31.983Z,1513225111.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:32.348Z,1513225112.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:32.376Z,1513225112.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:32.743Z,1513225112.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:32.775Z,1513225112.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:33.170Z,1513225113.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:33.188Z,1513225113.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:33.562Z,1513225113.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:33.584Z,1513225113.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:33.964Z,1513225113.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:33.987Z,1513225113.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:34.348Z,1513225114.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:34.377Z,1513225114.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:34.777Z,1513225114.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:34.823Z,1513225114.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:35.152Z,1513225115.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:35.180Z,1513225115.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:35.555Z,1513225115.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:35.575Z,1513225115.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:35.950Z,1513225115.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:36.006Z,1513225116.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:36.355Z,1513225116.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:36.371Z,1513225116.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:36.824Z,1513225116.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:36.891Z,1513225116.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:37.162Z,1513225117.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:37.191Z,1513225117.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:37.551Z,1513225117.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:37.587Z,1513225117.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:37.952Z,1513225117.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:37.967Z,1513225117.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:38.352Z,1513225118.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:38.367Z,1513225118.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:38.784Z,1513225118.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:38.809Z,1513225118.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:39.167Z,1513225119.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:39.199Z,1513225119.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:39.562Z,1513225119.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:39.592Z,1513225119.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:39.965Z,1513225119.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:39.000Z,1513225120.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:40.353Z,1513225120.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:40.368Z,1513225120.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:40.777Z,1513225120.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:40.817Z,1513225120.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:41.148Z,1513225121.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:41.210Z,1513225121.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:41.548Z,1513225121.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:41.576Z,1513225121.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:41.943Z,1513225121.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:41.979Z,1513225121.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:42.362Z,1513225122.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:42.381Z,1513225122.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:42.815Z,1513225122.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:42.887Z,1513225122.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:43.185Z,1513225123.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:43.204Z,1513225123.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:43.554Z,1513225123.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:43.570Z,1513225123.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:43.950Z,1513225123.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:43.965Z,1513225123.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:44.355Z,1513225124.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:44.375Z,1513225124.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:44.754Z,1513225124.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:44.768Z,1513225124.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:45.166Z,1513225125.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:45.180Z,1513225125.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:45.563Z,1513225125.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:45.583Z,1513225125.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:45.960Z,1513225125.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:45.976Z,1513225125.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:46.373Z,1513225126.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:46.413Z,1513225126.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:46.743Z,1513225126.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:46.775Z,1513225126.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:47.161Z,1513225127.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:47.176Z,1513225127.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:47.546Z,1513225127.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:47.584Z,1513225127.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:47.960Z,1513225127.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:47.975Z,1513225127.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:48.363Z,1513225128.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:48.412Z,1513225128.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:48.797Z,1513225128.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:48.839Z,1513225128.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:49.168Z,1513225129.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:49.226Z,1513225129.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:49.550Z,1513225129.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:49.603Z,1513225129.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:49.951Z,1513225129.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:49.999Z,1513225129.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:50.352Z,1513225130.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:50.383Z,1513225130.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:50.776Z,1513225130.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:50.824Z,1513225130.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:51.158Z,1513225131.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:51.194Z,1513225131.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:51.569Z,1513225131.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:51.584Z,1513225131.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:51.967Z,1513225131.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:51.982Z,1513225131.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:52.341Z,1513225132.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:52.371Z,1513225132.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:52.800Z,1513225132.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:52.838Z,1513225132.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:53.167Z,1513225133.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:53.183Z,1513225133.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:53.543Z,1513225133.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:53.567Z,1513225133.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:53.942Z,1513225133.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:53.979Z,1513225133.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:54.358Z,1513225134.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:54.385Z,1513225134.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:54.806Z,1513225134.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:54.828Z,1513225134.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:55.163Z,1513225135.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:55.199Z,1513225135.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:55.548Z,1513225135.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:55.567Z,1513225135.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:55.953Z,1513225135.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:55.967Z,1513225135.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:56.351Z,1513225136.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:56.371Z,1513225136.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:56.814Z,1513225136.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:56.837Z,1513225136.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:57.166Z,1513225137.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:57.180Z,1513225137.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:57.563Z,1513225137.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:57.578Z,1513225137.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:57.958Z,1513225137.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:57.973Z,1513225137.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:58.349Z,1513225138.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:58.397Z,1513225138.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:58.756Z,1513225138.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:58.771Z,1513225138.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:59.176Z,1513225139.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:59.208Z,1513225139.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:59.555Z,1513225139.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:59.575Z,1513225139.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:18:59.940Z,1513225139.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:18:59.967Z,1513225139.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:00.361Z,1513225140.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:00.377Z,1513225140.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:00.762Z,1513225140.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:00.777Z,1513225140.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:01.167Z,1513225141.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:01.183Z,1513225141.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:01.556Z,1513225141.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:01.571Z,1513225141.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:01.943Z,1513225141.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:01.976Z,1513225141.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:02.374Z,1513225142.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:02.395Z,1513225142.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:02.789Z,1513225142.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:02.826Z,1513225142.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:02.839Z,1513225142.839 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:19:03.166Z,1513225143.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:03.186Z,1513225143.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:03.566Z,1513225143.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:03.581Z,1513225143.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:03.971Z,1513225143.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:03.986Z,1513225143.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:04.340Z,1513225144.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:04.378Z,1513225144.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:04.783Z,1513225144.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:04.819Z,1513225144.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:05.142Z,1513225145.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:05.180Z,1513225145.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:05.543Z,1513225145.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:05.571Z,1513225145.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:05.947Z,1513225145.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:05.978Z,1513225145.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:06.367Z,1513225146.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:06.382Z,1513225146.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:06.797Z,1513225146.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:06.832Z,1513225146.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:07.170Z,1513225147.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:07.190Z,1513225147.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:07.551Z,1513225147.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:07.589Z,1513225147.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:07.949Z,1513225147.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:07.983Z,1513225147.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:08.348Z,1513225148.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:08.363Z,1513225148.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:08.779Z,1513225148.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:08.806Z,1513225148.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:09.162Z,1513225149.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:09.185Z,1513225149.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:09.585Z,1513225149.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:09.621Z,1513225149.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:09.954Z,1513225149.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:09.983Z,1513225149.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:10.347Z,1513225150.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:10.355Z,1513225150.355 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T04:19:10.355Z,1513225150.355 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:19:10.356Z,1513225150.356 [BPC1](ERROR): Data Fault
2017-12-14T04:19:10.380Z,1513225150.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:10.414Z,1513225150.414 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:19:10.800Z,1513225150.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:10.831Z,1513225150.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:11.153Z,1513225151.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:11.176Z,1513225151.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:11.564Z,1513225151.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:11.578Z,1513225151.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:11.623Z,1513225151.623 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:19:11.623Z,1513225151.623 [BPC1] No Fault, FailCount= 1
2017-12-14T04:19:11.955Z,1513225151.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:12.023Z,1513225152.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:12.366Z,1513225152.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:12.407Z,1513225152.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:12.792Z,1513225152.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:12.831Z,1513225152.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:13.164Z,1513225153.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:13.178Z,1513225153.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:13.558Z,1513225153.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:13.572Z,1513225153.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:13.944Z,1513225153.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:13.979Z,1513225153.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:14.360Z,1513225154.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:14.375Z,1513225154.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:14.755Z,1513225154.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:14.776Z,1513225154.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:15.168Z,1513225155.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:15.183Z,1513225155.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:15.569Z,1513225155.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:15.584Z,1513225155.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:15.974Z,1513225155.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:16.039Z,1513225156.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:16.344Z,1513225156.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:16.372Z,1513225156.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:16.781Z,1513225156.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:16.820Z,1513225156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:17.150Z,1513225157.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:17.183Z,1513225157.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:17.549Z,1513225157.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:17.625Z,1513225157.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:17.947Z,1513225157.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:17.979Z,1513225157.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:18.354Z,1513225158.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:18.392Z,1513225158.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:18.802Z,1513225158.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:18.832Z,1513225158.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:19.175Z,1513225159.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:19.200Z,1513225159.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:19.549Z,1513225159.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:19.585Z,1513225159.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:19.951Z,1513225159.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:19.965Z,1513225159.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:20.352Z,1513225160.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:20.407Z,1513225160.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:20.789Z,1513225160.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:20.816Z,1513225160.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:21.162Z,1513225161.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:21.189Z,1513225161.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:21.577Z,1513225161.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:21.592Z,1513225161.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:21.994Z,1513225161.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:22.009Z,1513225162.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:22.390Z,1513225162.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:22.420Z,1513225162.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:22.778Z,1513225162.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:22.818Z,1513225162.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:23.148Z,1513225163.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:23.163Z,1513225163.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:23.551Z,1513225163.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:23.565Z,1513225163.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:23.952Z,1513225163.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:23.968Z,1513225163.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:27.446Z,1513225167.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:27.467Z,1513225167.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:27.584Z,1513225167.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:27.619Z,1513225167.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:27.963Z,1513225167.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:27.983Z,1513225167.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:28.363Z,1513225168.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:28.378Z,1513225168.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:28.761Z,1513225168.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:28.776Z,1513225168.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:29.153Z,1513225169.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:29.174Z,1513225169.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:29.556Z,1513225169.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:29.572Z,1513225169.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:29.959Z,1513225169.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:29.974Z,1513225169.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:30.366Z,1513225170.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:30.383Z,1513225170.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:30.792Z,1513225170.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:30.817Z,1513225170.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:31.168Z,1513225171.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:31.184Z,1513225171.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:31.556Z,1513225171.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:31.572Z,1513225171.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:31.979Z,1513225171.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:32.019Z,1513225172.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:32.357Z,1513225172.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:32.426Z,1513225172.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:32.780Z,1513225172.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:32.858Z,1513225172.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:33.166Z,1513225173.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:33.196Z,1513225173.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:33.575Z,1513225173.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:33.630Z,1513225173.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:33.972Z,1513225173.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:33.987Z,1513225173.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:34.351Z,1513225174.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:34.399Z,1513225174.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:34.778Z,1513225174.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:34.804Z,1513225174.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:35.189Z,1513225175.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:35.237Z,1513225175.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:35.554Z,1513225175.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:35.595Z,1513225175.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:35.960Z,1513225175.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:35.975Z,1513225175.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:36.366Z,1513225176.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:36.397Z,1513225176.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:36.803Z,1513225176.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:36.817Z,1513225176.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:37.170Z,1513225177.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:37.184Z,1513225177.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:37.554Z,1513225177.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:37.573Z,1513225177.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:37.961Z,1513225177.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:37.975Z,1513225177.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:38.359Z,1513225178.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:38.374Z,1513225178.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:38.776Z,1513225178.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:38.877Z,1513225178.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:39.166Z,1513225179.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:39.187Z,1513225179.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:39.565Z,1513225179.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:39.587Z,1513225179.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:39.966Z,1513225179.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:39.987Z,1513225179.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:40.355Z,1513225180.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:40.392Z,1513225180.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:40.744Z,1513225180.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:40.760Z,1513225180.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:41.155Z,1513225181.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:41.175Z,1513225181.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:41.557Z,1513225181.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:41.571Z,1513225181.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:41.973Z,1513225181.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:42.008Z,1513225182.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:42.362Z,1513225182.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:42.376Z,1513225182.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:42.763Z,1513225182.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:42.828Z,1513225182.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:43.160Z,1513225183.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:43.179Z,1513225183.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:43.559Z,1513225183.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:43.575Z,1513225183.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:43.955Z,1513225183.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:43.970Z,1513225183.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:44.360Z,1513225184.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:44.375Z,1513225184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:44.781Z,1513225184.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:44.816Z,1513225184.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:45.177Z,1513225185.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:45.213Z,1513225185.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:45.566Z,1513225185.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:45.580Z,1513225185.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:45.966Z,1513225185.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:45.981Z,1513225185.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:46.356Z,1513225186.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:46.370Z,1513225186.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:46.769Z,1513225186.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:46.800Z,1513225186.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:47.192Z,1513225187.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:47.222Z,1513225187.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:47.560Z,1513225187.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:47.574Z,1513225187.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:47.944Z,1513225187.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:47.981Z,1513225187.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:48.382Z,1513225188.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:48.401Z,1513225188.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:48.793Z,1513225188.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:48.814Z,1513225188.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:49.162Z,1513225189.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:49.192Z,1513225189.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:49.554Z,1513225189.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:49.581Z,1513225189.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:49.955Z,1513225189.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:49.995Z,1513225189.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:50.351Z,1513225190.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:50.371Z,1513225190.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:50.777Z,1513225190.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:50.817Z,1513225190.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:51.166Z,1513225191.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:51.182Z,1513225191.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:51.595Z,1513225191.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:51.635Z,1513225191.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:51.984Z,1513225191.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:51.999Z,1513225191.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:52.355Z,1513225192.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:52.390Z,1513225192.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:52.813Z,1513225192.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:52.852Z,1513225192.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:53.163Z,1513225193.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:53.180Z,1513225193.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:53.562Z,1513225193.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:53.584Z,1513225193.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:53.962Z,1513225193.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:53.977Z,1513225193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:54.363Z,1513225194.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:54.378Z,1513225194.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:54.766Z,1513225194.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:54.872Z,1513225194.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:55.166Z,1513225195.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:55.194Z,1513225195.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:55.549Z,1513225195.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:55.584Z,1513225195.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:55.951Z,1513225195.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:55.995Z,1513225195.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:56.352Z,1513225196.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:56.383Z,1513225196.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:56.787Z,1513225196.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:56.836Z,1513225196.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:57.170Z,1513225197.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:57.192Z,1513225197.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:57.575Z,1513225197.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:57.590Z,1513225197.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:57.959Z,1513225197.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:57.987Z,1513225197.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:58.355Z,1513225198.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:58.387Z,1513225198.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:58.790Z,1513225198.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:58.815Z,1513225198.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:59.168Z,1513225199.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:59.198Z,1513225199.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:59.557Z,1513225199.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:59.571Z,1513225199.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:19:59.953Z,1513225199.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:19:59.983Z,1513225199.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:00.363Z,1513225200.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:00.377Z,1513225200.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:00.803Z,1513225200.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:00.818Z,1513225200.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:01.188Z,1513225201.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:01.225Z,1513225201.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:01.565Z,1513225201.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:01.580Z,1513225201.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:01.959Z,1513225201.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:01.974Z,1513225201.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:02.362Z,1513225202.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:02.377Z,1513225202.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:02.775Z,1513225202.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:02.806Z,1513225202.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:03.168Z,1513225203.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:03.187Z,1513225203.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:03.574Z,1513225203.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:03.595Z,1513225203.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:03.968Z,1513225203.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:03.986Z,1513225203.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:04.375Z,1513225204.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:04.430Z,1513225204.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:04.778Z,1513225204.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:04.826Z,1513225204.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:05.151Z,1513225205.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:05.215Z,1513225205.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:05.549Z,1513225205.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:05.575Z,1513225205.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:05.952Z,1513225205.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:05.978Z,1513225205.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:06.366Z,1513225206.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:06.381Z,1513225206.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:06.803Z,1513225206.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:06.836Z,1513225206.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:07.174Z,1513225207.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:07.189Z,1513225207.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:07.580Z,1513225207.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:07.599Z,1513225207.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:07.959Z,1513225207.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:07.997Z,1513225207.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:08.353Z,1513225208.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:08.368Z,1513225208.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:08.759Z,1513225208.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:08.774Z,1513225208.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:09.169Z,1513225209.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:09.198Z,1513225209.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:09.565Z,1513225209.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:09.596Z,1513225209.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:09.961Z,1513225209.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:09.000Z,1513225210.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:10.354Z,1513225210.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:10.368Z,1513225210.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:10.752Z,1513225210.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:10.799Z,1513225210.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:11.155Z,1513225211.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:11.179Z,1513225211.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:11.565Z,1513225211.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:11.580Z,1513225211.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:11.960Z,1513225211.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:11.974Z,1513225211.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:12.366Z,1513225212.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:12.381Z,1513225212.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:12.789Z,1513225212.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:12.832Z,1513225212.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:13.166Z,1513225213.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:13.190Z,1513225213.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:13.556Z,1513225213.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:13.571Z,1513225213.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:13.984Z,1513225213.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:14.016Z,1513225214.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:14.364Z,1513225214.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:14.379Z,1513225214.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:14.781Z,1513225214.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:14.820Z,1513225214.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:15.171Z,1513225215.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:15.186Z,1513225215.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:15.569Z,1513225215.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:15.584Z,1513225215.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:15.970Z,1513225215.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:15.984Z,1513225215.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:16.357Z,1513225216.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:16.372Z,1513225216.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:16.781Z,1513225216.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:16.815Z,1513225216.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:17.166Z,1513225217.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:17.243Z,1513225217.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:17.556Z,1513225217.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:17.584Z,1513225217.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:17.960Z,1513225217.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:17.976Z,1513225217.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:18.366Z,1513225218.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:18.412Z,1513225218.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:18.793Z,1513225218.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:18.828Z,1513225218.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:19.171Z,1513225219.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:19.230Z,1513225219.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:19.552Z,1513225219.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:19.579Z,1513225219.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:19.947Z,1513225219.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:19.975Z,1513225219.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:20.352Z,1513225220.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:20.398Z,1513225220.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:20.800Z,1513225220.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:20.857Z,1513225220.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:21.165Z,1513225221.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:21.192Z,1513225221.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:21.565Z,1513225221.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:21.590Z,1513225221.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:21.966Z,1513225221.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:21.989Z,1513225221.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:22.352Z,1513225222.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:22.366Z,1513225222.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:22.752Z,1513225222.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:22.771Z,1513225222.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:23.158Z,1513225223.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:23.172Z,1513225223.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:23.570Z,1513225223.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:23.626Z,1513225223.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:23.954Z,1513225223.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:23.969Z,1513225223.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:24.361Z,1513225224.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:24.377Z,1513225224.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:27.835Z,1513225227.835 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T04:20:27.835Z,1513225227.835 [NAL9602] Data Fault, FailCount= 1
2017-12-14T04:20:27.835Z,1513225227.835 [NAL9602](ERROR): Data Fault
2017-12-14T04:20:27.853Z,1513225227.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:27.916Z,1513225227.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:27.941Z,1513225227.941 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T04:20:27.987Z,1513225227.987 [NAL9602](INFO): Powering down
2017-12-14T04:20:28.006Z,1513225228.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:28.058Z,1513225228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:28.382Z,1513225228.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:28.415Z,1513225228.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:28.807Z,1513225228.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:28.821Z,1513225228.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:28.858Z,1513225228.858 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T04:20:28.858Z,1513225228.858 [NAL9602] No Fault, FailCount= 1
2017-12-14T04:20:29.186Z,1513225229.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:29.213Z,1513225229.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:29.583Z,1513225229.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:29.610Z,1513225229.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:30.021Z,1513225230.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:30.081Z,1513225230.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:30.374Z,1513225230.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:30.405Z,1513225230.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:30.789Z,1513225230.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:30.820Z,1513225230.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:31.178Z,1513225231.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:31.215Z,1513225231.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:31.575Z,1513225231.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:31.590Z,1513225231.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:31.981Z,1513225231.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:31.996Z,1513225231.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:32.386Z,1513225232.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:32.423Z,1513225232.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:32.782Z,1513225232.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:32.829Z,1513225232.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:33.234Z,1513225233.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:33.277Z,1513225233.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:33.583Z,1513225233.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:33.603Z,1513225233.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:33.978Z,1513225233.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:34.005Z,1513225234.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:34.389Z,1513225234.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:34.405Z,1513225234.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:34.834Z,1513225234.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:34.878Z,1513225234.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:35.186Z,1513225235.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:35.207Z,1513225235.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:35.590Z,1513225235.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:35.612Z,1513225235.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:35.983Z,1513225235.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:35.997Z,1513225235.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:36.410Z,1513225236.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:36.446Z,1513225236.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:36.774Z,1513225236.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:36.803Z,1513225236.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:37.174Z,1513225237.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:37.201Z,1513225237.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:37.574Z,1513225237.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:37.606Z,1513225237.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:37.978Z,1513225237.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:38.004Z,1513225238.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:38.376Z,1513225238.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:38.403Z,1513225238.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:38.779Z,1513225238.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:38.812Z,1513225238.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:39.206Z,1513225239.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:39.227Z,1513225239.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:39.625Z,1513225239.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:39.725Z,1513225239.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:39.974Z,1513225239.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:40.042Z,1513225240.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:40.383Z,1513225240.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:40.413Z,1513225240.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:40.805Z,1513225240.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:40.843Z,1513225240.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:41.181Z,1513225241.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:41.204Z,1513225241.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:41.574Z,1513225241.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:41.623Z,1513225241.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:41.982Z,1513225241.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:41.996Z,1513225241.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:42.376Z,1513225242.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:42.391Z,1513225242.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:42.793Z,1513225242.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:42.867Z,1513225242.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:43.189Z,1513225243.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:43.210Z,1513225243.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:43.582Z,1513225243.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:43.609Z,1513225243.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:43.978Z,1513225243.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:43.993Z,1513225243.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:44.378Z,1513225244.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:44.392Z,1513225244.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:44.780Z,1513225244.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:44.815Z,1513225244.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:45.185Z,1513225245.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:45.199Z,1513225245.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:45.582Z,1513225245.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:45.596Z,1513225245.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:45.976Z,1513225245.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:46.031Z,1513225246.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:46.383Z,1513225246.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:46.398Z,1513225246.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:46.791Z,1513225246.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:46.831Z,1513225246.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:47.181Z,1513225247.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:47.196Z,1513225247.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:47.582Z,1513225247.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:47.596Z,1513225247.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:47.984Z,1513225247.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:47.999Z,1513225247.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:48.377Z,1513225248.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:48.391Z,1513225248.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:48.822Z,1513225248.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:48.845Z,1513225248.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:49.221Z,1513225249.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:49.265Z,1513225249.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:49.578Z,1513225249.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:49.593Z,1513225249.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:49.978Z,1513225249.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:50.016Z,1513225250.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:50.383Z,1513225250.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:50.397Z,1513225250.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:50.778Z,1513225250.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:50.817Z,1513225250.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:51.182Z,1513225251.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:51.200Z,1513225251.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:51.578Z,1513225251.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:51.597Z,1513225251.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:51.987Z,1513225251.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:52.002Z,1513225252.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:52.428Z,1513225252.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:52.459Z,1513225252.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:52.791Z,1513225252.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:52.805Z,1513225252.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:53.183Z,1513225253.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:53.211Z,1513225253.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:53.586Z,1513225253.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:53.601Z,1513225253.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:53.986Z,1513225253.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:54.000Z,1513225254.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:54.372Z,1513225254.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:54.397Z,1513225254.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:54.794Z,1513225254.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:54.815Z,1513225254.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:55.188Z,1513225255.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:55.207Z,1513225255.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:55.633Z,1513225255.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:55.672Z,1513225255.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:55.974Z,1513225255.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:56.008Z,1513225256.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:56.386Z,1513225256.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:56.400Z,1513225256.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:56.794Z,1513225256.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:56.815Z,1513225256.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:57.192Z,1513225257.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:57.207Z,1513225257.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:57.575Z,1513225257.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:57.607Z,1513225257.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:57.989Z,1513225257.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:58.004Z,1513225258.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:58.358Z,1513225258.358 [NAL9602](INFO): Powering up NAL9602
2017-12-14T04:20:58.375Z,1513225258.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:58.411Z,1513225258.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:58.816Z,1513225258.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:58.879Z,1513225258.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:59.182Z,1513225259.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:59.208Z,1513225259.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:59.575Z,1513225259.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:20:59.611Z,1513225259.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:20:59.979Z,1513225259.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:00.011Z,1513225260.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:00.378Z,1513225260.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:00.413Z,1513225260.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:00.780Z,1513225260.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:00.819Z,1513225260.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:01.178Z,1513225261.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:01.210Z,1513225261.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:01.578Z,1513225261.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:01.593Z,1513225261.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:02.016Z,1513225262.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:02.095Z,1513225262.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:02.382Z,1513225262.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:02.456Z,1513225262.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:02.825Z,1513225262.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:02.856Z,1513225262.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:03.182Z,1513225263.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:03.260Z,1513225263.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:03.576Z,1513225263.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:03.601Z,1513225263.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:03.988Z,1513225263.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:04.044Z,1513225264.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:04.375Z,1513225264.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:04.401Z,1513225264.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:04.789Z,1513225264.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:04.804Z,1513225264.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:05.174Z,1513225265.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:05.246Z,1513225265.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:05.574Z,1513225265.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:05.607Z,1513225265.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:05.978Z,1513225265.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:06.011Z,1513225266.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:06.374Z,1513225266.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:06.411Z,1513225266.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:06.778Z,1513225266.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:06.804Z,1513225266.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:07.174Z,1513225267.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:07.207Z,1513225267.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:07.574Z,1513225267.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:07.607Z,1513225267.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:07.974Z,1513225267.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:08.007Z,1513225268.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:08.415Z,1513225268.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:08.450Z,1513225268.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:08.801Z,1513225268.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:08.816Z,1513225268.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:09.166Z,1513225269.166 [NAL9602](INFO): NAL9602 initialized
2017-12-14T04:21:09.192Z,1513225269.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:09.214Z,1513225269.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:09.580Z,1513225269.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:09.608Z,1513225269.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:09.994Z,1513225269.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:10.016Z,1513225270.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:10.386Z,1513225270.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:10.419Z,1513225270.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:10.786Z,1513225270.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:10.824Z,1513225270.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:11.179Z,1513225271.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:11.206Z,1513225271.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:11.574Z,1513225271.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:11.611Z,1513225271.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:11.998Z,1513225271.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:12.033Z,1513225272.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:12.033Z,1513225272.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2017-12-14T04:21:12.033Z,1513225272.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:21:12.035Z,1513225272.035 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:12.035Z,1513225272.035 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2017-12-14T04:21:12.035Z,1513225272.035 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:21:12.042Z,1513225272.042 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:12.042Z,1513225272.042 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2017-12-14T04:21:12.042Z,1513225272.042 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:21:12.068Z,1513225272.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:21:12.068Z,1513225272.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:21:12.071Z,1513225272.071 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:21:12.397Z,1513225272.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:12.457Z,1513225272.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:21:12.457Z,1513225272.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2017-12-14T04:21:12.458Z,1513225272.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:21:12.458Z,1513225272.458 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2017-12-14T04:21:12.458Z,1513225272.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:21:12.458Z,1513225272.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2017-12-14T04:21:12.801Z,1513225272.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:12.821Z,1513225272.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:21:12.821Z,1513225272.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:21:12.822Z,1513225272.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:21:12.822Z,1513225272.822 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:21:12.822Z,1513225272.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:21:12.823Z,1513225272.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:21:12.823Z,1513225272.823 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:21:12.824Z,1513225272.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:21:12.824Z,1513225272.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:21:13.176Z,1513225273.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:13.211Z,1513225273.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:13.582Z,1513225273.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:13.612Z,1513225273.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:13.975Z,1513225273.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:14.012Z,1513225274.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:14.379Z,1513225274.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:14.411Z,1513225274.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:14.857Z,1513225274.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:14.891Z,1513225274.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:15.204Z,1513225275.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:15.235Z,1513225275.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:15.605Z,1513225275.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:15.628Z,1513225275.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:15.975Z,1513225275.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:16.011Z,1513225276.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:16.384Z,1513225276.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:16.421Z,1513225276.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:16.824Z,1513225276.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:16.873Z,1513225276.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:17.190Z,1513225277.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:17.204Z,1513225277.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:17.598Z,1513225277.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:17.681Z,1513225277.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:18.033Z,1513225278.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:18.100Z,1513225278.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:18.396Z,1513225278.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:18.420Z,1513225278.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:18.776Z,1513225278.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:18.808Z,1513225278.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:19.206Z,1513225279.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:19.238Z,1513225279.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:19.576Z,1513225279.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:19.604Z,1513225279.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:19.995Z,1513225279.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:20.068Z,1513225280.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:20.298Z,1513225280.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:20.400Z,1513225280.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:20.424Z,1513225280.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:20.792Z,1513225280.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:20.836Z,1513225280.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:21.094Z,1513225281.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:21.198Z,1513225281.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:21.231Z,1513225281.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:21.497Z,1513225281.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:21.603Z,1513225281.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:21.640Z,1513225281.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:21.991Z,1513225281.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:22.040Z,1513225282.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:22.389Z,1513225282.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:22.447Z,1513225282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:22.808Z,1513225282.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:22.880Z,1513225282.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:23.190Z,1513225283.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:23.238Z,1513225283.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:23.591Z,1513225283.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:23.631Z,1513225283.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:23.977Z,1513225283.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:24.030Z,1513225284.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:24.397Z,1513225284.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:24.560Z,1513225284.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:28.477Z,1513225288.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:28.506Z,1513225288.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:28.618Z,1513225288.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:28.679Z,1513225288.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:28.978Z,1513225288.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:28.993Z,1513225288.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:29.391Z,1513225289.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:29.472Z,1513225289.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:29.777Z,1513225289.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:29.837Z,1513225289.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:30.156Z,1513225290.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:30.186Z,1513225290.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:30.556Z,1513225290.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:30.589Z,1513225290.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:30.957Z,1513225290.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:30.997Z,1513225290.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:31.358Z,1513225291.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:31.413Z,1513225291.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:31.767Z,1513225291.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:31.813Z,1513225291.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:32.172Z,1513225292.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:32.196Z,1513225292.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:32.568Z,1513225292.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:32.611Z,1513225292.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:32.976Z,1513225292.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:33.020Z,1513225293.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:33.354Z,1513225293.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:33.407Z,1513225293.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:33.759Z,1513225293.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:33.787Z,1513225293.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:34.158Z,1513225294.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:34.175Z,1513225294.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:34.592Z,1513225294.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:34.641Z,1513225294.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:34.969Z,1513225294.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:34.988Z,1513225294.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:35.372Z,1513225295.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:35.415Z,1513225295.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:35.769Z,1513225295.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:35.791Z,1513225295.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:36.157Z,1513225296.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:36.176Z,1513225296.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:36.557Z,1513225296.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:36.584Z,1513225296.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:36.958Z,1513225296.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:36.981Z,1513225296.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:37.356Z,1513225297.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:37.375Z,1513225297.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:37.767Z,1513225297.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:37.887Z,1513225297.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:38.173Z,1513225298.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:38.188Z,1513225298.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:38.569Z,1513225298.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:38.584Z,1513225298.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:38.967Z,1513225298.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:38.982Z,1513225298.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:39.356Z,1513225299.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:39.371Z,1513225299.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:39.758Z,1513225299.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:39.773Z,1513225299.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:40.159Z,1513225300.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:40.174Z,1513225300.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:40.552Z,1513225300.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:40.567Z,1513225300.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:40.973Z,1513225300.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:40.988Z,1513225300.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:41.370Z,1513225301.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:41.398Z,1513225301.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:41.761Z,1513225301.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:41.776Z,1513225301.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:42.156Z,1513225302.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:42.170Z,1513225302.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:42.558Z,1513225302.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:42.573Z,1513225302.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:42.955Z,1513225302.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:42.970Z,1513225302.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:43.356Z,1513225303.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:43.372Z,1513225303.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:43.769Z,1513225303.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:43.785Z,1513225303.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:44.172Z,1513225304.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:44.195Z,1513225304.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:44.565Z,1513225304.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:44.587Z,1513225304.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:44.951Z,1513225304.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:44.966Z,1513225304.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:45.357Z,1513225305.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:45.375Z,1513225305.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:45.757Z,1513225305.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:45.830Z,1513225305.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:46.157Z,1513225306.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:46.172Z,1513225306.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:46.556Z,1513225306.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:46.571Z,1513225306.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:46.965Z,1513225306.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:46.980Z,1513225306.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:47.372Z,1513225307.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:47.395Z,1513225307.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:47.766Z,1513225307.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:47.787Z,1513225307.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:48.156Z,1513225308.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:48.171Z,1513225308.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:48.559Z,1513225308.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:48.575Z,1513225308.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:48.982Z,1513225308.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:48.997Z,1513225308.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:49.354Z,1513225309.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:49.420Z,1513225309.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:49.769Z,1513225309.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:49.791Z,1513225309.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:50.169Z,1513225310.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:50.256Z,1513225310.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:50.567Z,1513225310.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:50.610Z,1513225310.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:50.955Z,1513225310.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:51.003Z,1513225311.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:51.357Z,1513225311.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:51.372Z,1513225311.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:51.756Z,1513225311.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:51.806Z,1513225311.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:52.159Z,1513225312.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:52.174Z,1513225312.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:52.548Z,1513225312.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:52.563Z,1513225312.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:52.973Z,1513225312.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:52.988Z,1513225312.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:53.369Z,1513225313.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:53.391Z,1513225313.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:53.768Z,1513225313.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:53.786Z,1513225313.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:54.155Z,1513225314.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:54.183Z,1513225314.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:54.555Z,1513225314.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:54.583Z,1513225314.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:54.957Z,1513225314.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:54.990Z,1513225314.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:55.356Z,1513225315.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:55.383Z,1513225315.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:55.766Z,1513225315.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:55.791Z,1513225315.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:56.170Z,1513225316.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:56.192Z,1513225316.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:56.566Z,1513225316.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:56.603Z,1513225316.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:56.956Z,1513225316.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:57.019Z,1513225317.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:57.351Z,1513225317.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:57.375Z,1513225317.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:57.764Z,1513225317.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:57.801Z,1513225317.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:58.156Z,1513225318.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:58.186Z,1513225318.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:58.555Z,1513225318.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:58.575Z,1513225318.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:58.977Z,1513225318.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:59.005Z,1513225319.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:59.382Z,1513225319.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:59.412Z,1513225319.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:21:59.774Z,1513225319.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:21:59.804Z,1513225319.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:00.173Z,1513225320.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:00.255Z,1513225320.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:00.561Z,1513225320.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:00.576Z,1513225320.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:00.963Z,1513225320.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:00.979Z,1513225320.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:01.355Z,1513225321.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:01.380Z,1513225321.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:01.774Z,1513225321.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:01.789Z,1513225321.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:02.178Z,1513225322.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:02.231Z,1513225322.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:02.290Z,1513225322.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:02.577Z,1513225322.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:02.592Z,1513225322.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:02.956Z,1513225322.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:02.987Z,1513225322.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:03.087Z,1513225323.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:03.358Z,1513225323.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:03.388Z,1513225323.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:03.500Z,1513225323.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:03.763Z,1513225323.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:03.777Z,1513225323.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:04.162Z,1513225324.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:04.188Z,1513225324.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:04.568Z,1513225324.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:04.582Z,1513225324.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:04.974Z,1513225324.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:04.989Z,1513225324.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:05.378Z,1513225325.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:05.399Z,1513225325.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:05.776Z,1513225325.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:05.792Z,1513225325.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:06.162Z,1513225326.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:06.177Z,1513225326.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:06.576Z,1513225326.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:06.595Z,1513225326.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:06.970Z,1513225326.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:06.985Z,1513225326.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:07.355Z,1513225327.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:07.387Z,1513225327.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:07.774Z,1513225327.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:07.796Z,1513225327.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:08.185Z,1513225328.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:08.201Z,1513225328.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:08.579Z,1513225328.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:08.594Z,1513225328.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:08.978Z,1513225328.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:08.999Z,1513225328.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:09.360Z,1513225329.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:09.388Z,1513225329.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:09.755Z,1513225329.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:09.822Z,1513225329.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:10.156Z,1513225330.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:10.192Z,1513225330.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:10.555Z,1513225330.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:10.591Z,1513225330.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:10.966Z,1513225330.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:11.002Z,1513225331.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:11.392Z,1513225331.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:11.415Z,1513225331.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:11.842Z,1513225331.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:11.891Z,1513225331.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:12.154Z,1513225332.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:12.238Z,1513225332.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:12.555Z,1513225332.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:12.596Z,1513225332.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:13.019Z,1513225333.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:13.099Z,1513225333.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:13.359Z,1513225333.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:13.374Z,1513225333.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:13.773Z,1513225333.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:13.839Z,1513225333.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:14.177Z,1513225334.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:14.203Z,1513225334.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:14.574Z,1513225334.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:14.599Z,1513225334.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:14.963Z,1513225334.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:14.978Z,1513225334.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:15.358Z,1513225335.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:15.393Z,1513225335.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:15.768Z,1513225335.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:15.782Z,1513225335.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:16.188Z,1513225336.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:16.220Z,1513225336.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:16.294Z,1513225336.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:16.554Z,1513225336.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:16.582Z,1513225336.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:16.976Z,1513225336.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:16.995Z,1513225336.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:17.091Z,1513225337.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:17.377Z,1513225337.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:17.395Z,1513225337.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:17.509Z,1513225337.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:17.810Z,1513225337.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:17.951Z,1513225337.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:18.156Z,1513225338.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:18.186Z,1513225338.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:18.553Z,1513225338.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:18.587Z,1513225338.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:18.955Z,1513225338.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:18.991Z,1513225338.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:19.379Z,1513225339.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:19.410Z,1513225339.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:19.765Z,1513225339.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:19.780Z,1513225339.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:20.173Z,1513225340.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:20.204Z,1513225340.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:20.576Z,1513225340.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:20.609Z,1513225340.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:20.962Z,1513225340.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:20.983Z,1513225340.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:21.362Z,1513225341.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:21.378Z,1513225341.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:21.761Z,1513225341.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:21.776Z,1513225341.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:22.165Z,1513225342.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:22.208Z,1513225342.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:22.572Z,1513225342.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:22.608Z,1513225342.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:22.965Z,1513225342.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:23.003Z,1513225343.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:23.377Z,1513225343.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:23.406Z,1513225343.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:23.410Z,1513225343.410 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:22:23.410Z,1513225343.410 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:22:23.410Z,1513225343.410 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:22:23.410Z,1513225343.410 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:22:23.766Z,1513225343.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:23.794Z,1513225343.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:23.797Z,1513225343.797 [Default:CheckIn:D] Stopped
2017-12-14T04:22:23.797Z,1513225343.797 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:22:24.154Z,1513225344.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:24.189Z,1513225344.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:24.192Z,1513225344.192 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 229.140120 min 
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn:E] Stopped
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn] Stopped
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn](INFO): Running loop #23
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn] Running Loop=23
2017-12-14T04:22:24.193Z,1513225344.193 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:22:24.194Z,1513225344.194 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:22:24.556Z,1513225344.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:24.570Z,1513225344.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:28.037Z,1513225348.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:28.052Z,1513225348.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:28.153Z,1513225348.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:28.168Z,1513225348.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:28.532Z,1513225348.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:28.546Z,1513225348.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:28.941Z,1513225348.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:28.963Z,1513225348.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:29.353Z,1513225349.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:29.368Z,1513225349.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:29.712Z,1513225349.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:29.732Z,1513225349.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:30.113Z,1513225350.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:30.128Z,1513225350.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:30.294Z,1513225350.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:30.513Z,1513225350.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:30.528Z,1513225350.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:30.934Z,1513225350.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:30.963Z,1513225350.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:31.096Z,1513225351.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:31.329Z,1513225351.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:31.356Z,1513225351.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:31.501Z,1513225351.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:31.726Z,1513225351.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:31.749Z,1513225351.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:32.112Z,1513225352.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:32.132Z,1513225352.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:32.522Z,1513225352.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:32.537Z,1513225352.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:32.918Z,1513225352.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:32.933Z,1513225352.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:33.314Z,1513225353.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:33.331Z,1513225353.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:33.721Z,1513225353.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:33.736Z,1513225353.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:34.159Z,1513225354.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:34.223Z,1513225354.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:34.519Z,1513225354.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:34.590Z,1513225354.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:34.920Z,1513225354.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:34.934Z,1513225354.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:35.318Z,1513225355.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:35.412Z,1513225355.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:35.729Z,1513225355.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:35.744Z,1513225355.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:36.118Z,1513225356.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:36.155Z,1513225356.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:36.504Z,1513225356.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:36.540Z,1513225356.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:36.932Z,1513225356.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:36.952Z,1513225356.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:37.332Z,1513225357.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:37.351Z,1513225357.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:37.722Z,1513225357.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:37.744Z,1513225357.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:38.108Z,1513225358.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:38.134Z,1513225358.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:38.506Z,1513225358.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:38.539Z,1513225358.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:38.911Z,1513225358.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:38.946Z,1513225358.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:39.307Z,1513225359.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:39.338Z,1513225359.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:39.726Z,1513225359.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:39.740Z,1513225359.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:40.134Z,1513225360.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:40.155Z,1513225360.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:40.534Z,1513225360.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:40.549Z,1513225360.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:40.908Z,1513225360.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:40.935Z,1513225360.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:41.307Z,1513225361.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:41.343Z,1513225361.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:41.711Z,1513225361.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:41.744Z,1513225361.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:42.115Z,1513225362.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:42.142Z,1513225362.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:42.507Z,1513225362.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:42.566Z,1513225362.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:42.936Z,1513225362.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:42.955Z,1513225362.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:43.326Z,1513225363.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:43.366Z,1513225363.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:43.726Z,1513225363.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:43.759Z,1513225363.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:44.111Z,1513225364.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:44.147Z,1513225364.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:44.281Z,1513225364.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:44.511Z,1513225364.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:44.560Z,1513225364.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:44.912Z,1513225364.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:44.943Z,1513225364.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:45.086Z,1513225365.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:45.327Z,1513225365.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:45.355Z,1513225365.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:45.489Z,1513225365.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:45.718Z,1513225365.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:45.774Z,1513225365.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:46.130Z,1513225366.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:46.159Z,1513225366.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:46.286Z,1513225366.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:46.525Z,1513225366.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:46.559Z,1513225366.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:46.925Z,1513225366.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:46.959Z,1513225366.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:47.081Z,1513225367.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:47.313Z,1513225367.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:47.340Z,1513225367.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:47.485Z,1513225367.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:47.742Z,1513225367.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:47.811Z,1513225367.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:48.118Z,1513225368.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:48.132Z,1513225368.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:48.515Z,1513225368.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:48.532Z,1513225368.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:48.918Z,1513225368.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:48.939Z,1513225368.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:49.322Z,1513225369.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:49.337Z,1513225369.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:49.721Z,1513225369.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:49.740Z,1513225369.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:50.120Z,1513225370.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:50.134Z,1513225370.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:50.521Z,1513225370.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:50.535Z,1513225370.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:50.958Z,1513225370.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:51.019Z,1513225371.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:51.311Z,1513225371.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:51.339Z,1513225371.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:51.725Z,1513225371.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:51.740Z,1513225371.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:52.125Z,1513225372.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:52.147Z,1513225372.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:52.529Z,1513225372.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:52.551Z,1513225372.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:52.907Z,1513225372.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:52.934Z,1513225372.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:53.327Z,1513225373.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:53.347Z,1513225373.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:53.706Z,1513225373.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:53.739Z,1513225373.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:54.108Z,1513225374.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:54.133Z,1513225374.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:54.517Z,1513225374.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:54.540Z,1513225374.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:54.930Z,1513225374.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:54.945Z,1513225374.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:55.331Z,1513225375.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:55.346Z,1513225375.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:55.731Z,1513225375.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:55.751Z,1513225375.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:56.119Z,1513225376.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:56.200Z,1513225376.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:56.519Z,1513225376.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:56.548Z,1513225376.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:56.916Z,1513225376.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:56.947Z,1513225376.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:57.323Z,1513225377.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:57.371Z,1513225377.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:57.725Z,1513225377.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:57.753Z,1513225377.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:58.126Z,1513225378.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:58.195Z,1513225378.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:58.266Z,1513225378.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:58.525Z,1513225378.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:58.555Z,1513225378.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:58.954Z,1513225378.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:59.008Z,1513225379.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:59.066Z,1513225379.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:59.310Z,1513225379.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:59.337Z,1513225379.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:22:59.489Z,1513225379.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:59.719Z,1513225379.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:22:59.734Z,1513225379.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:00.119Z,1513225380.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:00.133Z,1513225380.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:00.286Z,1513225380.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:00.511Z,1513225380.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:00.527Z,1513225380.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:00.920Z,1513225380.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:00.939Z,1513225380.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:01.081Z,1513225381.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:01.333Z,1513225381.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:01.367Z,1513225381.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:01.485Z,1513225381.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:01.721Z,1513225381.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:01.743Z,1513225381.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:02.118Z,1513225382.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:02.132Z,1513225382.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:02.514Z,1513225382.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:02.540Z,1513225382.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:02.919Z,1513225382.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:03.012Z,1513225383.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:03.311Z,1513225383.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:03.331Z,1513225383.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:03.721Z,1513225383.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:03.736Z,1513225383.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:04.122Z,1513225384.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:04.136Z,1513225384.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:04.533Z,1513225384.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:04.564Z,1513225384.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:04.916Z,1513225384.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:04.935Z,1513225384.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:05.341Z,1513225385.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:05.376Z,1513225385.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:05.718Z,1513225385.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:05.739Z,1513225385.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:06.123Z,1513225386.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:06.138Z,1513225386.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:06.513Z,1513225386.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:06.570Z,1513225386.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:06.926Z,1513225386.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:06.940Z,1513225386.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:07.326Z,1513225387.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:07.340Z,1513225387.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:07.724Z,1513225387.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:07.740Z,1513225387.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:08.118Z,1513225388.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:08.132Z,1513225388.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:08.545Z,1513225388.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:08.612Z,1513225388.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:08.916Z,1513225388.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:08.935Z,1513225388.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:09.324Z,1513225389.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:09.339Z,1513225389.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:09.727Z,1513225389.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:09.742Z,1513225389.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:10.127Z,1513225390.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:10.147Z,1513225390.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:10.523Z,1513225390.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:10.539Z,1513225390.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:10.923Z,1513225390.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:10.938Z,1513225390.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:11.311Z,1513225391.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:11.332Z,1513225391.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:11.740Z,1513225391.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:11.767Z,1513225391.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:12.107Z,1513225392.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:12.134Z,1513225392.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:12.508Z,1513225392.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:12.544Z,1513225392.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:12.930Z,1513225392.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:12.945Z,1513225392.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:13.331Z,1513225393.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:13.346Z,1513225393.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:13.734Z,1513225393.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:13.864Z,1513225393.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:14.115Z,1513225394.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:14.141Z,1513225394.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:14.507Z,1513225394.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:14.538Z,1513225394.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:14.955Z,1513225394.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:14.992Z,1513225394.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:15.332Z,1513225395.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:15.347Z,1513225395.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:15.730Z,1513225395.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:15.751Z,1513225395.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:16.136Z,1513225396.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:16.159Z,1513225396.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:16.536Z,1513225396.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:16.551Z,1513225396.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:16.923Z,1513225396.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:16.949Z,1513225396.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:17.320Z,1513225397.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:17.353Z,1513225397.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:17.718Z,1513225397.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:17.733Z,1513225397.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:18.122Z,1513225398.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:18.165Z,1513225398.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:18.513Z,1513225398.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:18.582Z,1513225398.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:18.931Z,1513225398.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:18.989Z,1513225398.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:19.334Z,1513225399.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:19.355Z,1513225399.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:19.730Z,1513225399.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:19.786Z,1513225399.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:20.107Z,1513225400.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:20.147Z,1513225400.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:20.523Z,1513225400.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:20.579Z,1513225400.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:20.908Z,1513225400.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:20.937Z,1513225400.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:21.318Z,1513225401.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:21.359Z,1513225401.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:21.717Z,1513225401.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:21.747Z,1513225401.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:22.131Z,1513225402.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:22.160Z,1513225402.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:22.521Z,1513225402.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:22.555Z,1513225402.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:22.907Z,1513225402.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:22.948Z,1513225402.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:23.309Z,1513225403.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:23.323Z,1513225403.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:23.712Z,1513225403.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:23.728Z,1513225403.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:24.112Z,1513225404.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:24.127Z,1513225404.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:24.555Z,1513225404.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:24.582Z,1513225404.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:24.950Z,1513225404.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:24.967Z,1513225404.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:28.325Z,1513225408.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:28.340Z,1513225408.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:28.450Z,1513225408.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:28.487Z,1513225408.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:28.794Z,1513225408.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:28.832Z,1513225408.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:29.198Z,1513225409.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:29.226Z,1513225409.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:29.610Z,1513225409.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:29.632Z,1513225409.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:30.005Z,1513225410.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:30.028Z,1513225410.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:30.405Z,1513225410.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:30.436Z,1513225410.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:30.795Z,1513225410.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:30.811Z,1513225410.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:31.202Z,1513225411.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:31.224Z,1513225411.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:31.602Z,1513225411.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:31.647Z,1513225411.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:32.006Z,1513225412.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:32.020Z,1513225412.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:32.405Z,1513225412.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:32.419Z,1513225412.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:32.797Z,1513225412.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:32.817Z,1513225412.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:33.191Z,1513225413.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:33.214Z,1513225413.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:33.598Z,1513225413.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:33.617Z,1513225413.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:34.013Z,1513225414.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:34.068Z,1513225414.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:34.406Z,1513225414.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:34.421Z,1513225414.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:34.807Z,1513225414.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:34.821Z,1513225414.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:35.198Z,1513225415.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:35.229Z,1513225415.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:35.598Z,1513225415.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:35.613Z,1513225415.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:35.988Z,1513225415.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:36.020Z,1513225416.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:36.391Z,1513225416.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:36.417Z,1513225416.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:36.837Z,1513225416.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:36.860Z,1513225416.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:37.213Z,1513225417.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:37.248Z,1513225417.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:37.598Z,1513225417.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:37.631Z,1513225417.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:37.991Z,1513225417.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:38.022Z,1513225418.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:38.386Z,1513225418.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:38.421Z,1513225418.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:38.792Z,1513225418.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:38.823Z,1513225418.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:39.187Z,1513225419.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:39.219Z,1513225419.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:39.613Z,1513225419.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:39.628Z,1513225419.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:40.018Z,1513225420.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:40.033Z,1513225420.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:40.415Z,1513225420.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:40.494Z,1513225420.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:40.798Z,1513225420.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:40.858Z,1513225420.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:41.202Z,1513225421.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:41.235Z,1513225421.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:41.606Z,1513225421.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:41.651Z,1513225421.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:42.008Z,1513225422.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:42.035Z,1513225422.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:42.405Z,1513225422.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:42.457Z,1513225422.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:42.795Z,1513225422.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:42.815Z,1513225422.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:43.194Z,1513225423.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:43.209Z,1513225423.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:43.609Z,1513225423.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:43.683Z,1513225423.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:44.005Z,1513225424.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:44.020Z,1513225424.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:44.410Z,1513225424.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:44.424Z,1513225424.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:44.800Z,1513225424.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:44.819Z,1513225424.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:45.198Z,1513225425.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:45.220Z,1513225425.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:45.606Z,1513225425.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:45.621Z,1513225425.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:46.009Z,1513225426.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:46.035Z,1513225426.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:46.411Z,1513225426.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:46.426Z,1513225426.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:46.829Z,1513225426.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:46.871Z,1513225426.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:47.187Z,1513225427.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:47.224Z,1513225427.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:47.620Z,1513225427.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:47.636Z,1513225427.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:48.015Z,1513225428.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:48.029Z,1513225428.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:48.402Z,1513225428.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:48.433Z,1513225428.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:48.788Z,1513225428.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:48.824Z,1513225428.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:49.188Z,1513225429.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:49.220Z,1513225429.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:49.588Z,1513225429.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:49.623Z,1513225429.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:50.007Z,1513225430.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:50.036Z,1513225430.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:50.410Z,1513225430.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:50.431Z,1513225430.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:50.840Z,1513225430.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:50.906Z,1513225430.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:51.187Z,1513225431.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:51.223Z,1513225431.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:51.587Z,1513225431.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:51.625Z,1513225431.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:51.987Z,1513225431.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:52.027Z,1513225432.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:52.395Z,1513225432.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:52.425Z,1513225432.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:52.835Z,1513225432.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:52.849Z,1513225432.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:53.252Z,1513225433.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:53.302Z,1513225433.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:53.606Z,1513225433.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:53.654Z,1513225433.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:53.994Z,1513225433.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:54.030Z,1513225434.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:54.381Z,1513225434.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:54.407Z,1513225434.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:54.794Z,1513225434.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:54.809Z,1513225434.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:55.197Z,1513225435.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:55.211Z,1513225435.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:55.598Z,1513225435.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:55.613Z,1513225435.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:56.001Z,1513225436.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:56.017Z,1513225436.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:56.425Z,1513225436.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:56.465Z,1513225436.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:56.797Z,1513225436.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:56.812Z,1513225436.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:57.200Z,1513225437.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:57.215Z,1513225437.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:57.599Z,1513225437.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:57.626Z,1513225437.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:58.006Z,1513225438.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:58.020Z,1513225438.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:58.404Z,1513225438.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:58.427Z,1513225438.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:58.796Z,1513225438.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:58.823Z,1513225438.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:59.191Z,1513225439.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:59.222Z,1513225439.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:23:59.633Z,1513225439.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:23:59.688Z,1513225439.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:00.007Z,1513225440.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:00.022Z,1513225440.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:00.412Z,1513225440.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:00.427Z,1513225440.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:00.805Z,1513225440.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:00.821Z,1513225440.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:01.187Z,1513225441.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:01.215Z,1513225441.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:01.587Z,1513225441.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:01.619Z,1513225441.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:01.992Z,1513225441.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:02.019Z,1513225442.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:02.387Z,1513225442.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:02.419Z,1513225442.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:02.830Z,1513225442.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:02.920Z,1513225442.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:03.208Z,1513225443.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:03.286Z,1513225443.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:03.609Z,1513225443.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:03.624Z,1513225443.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:03.985Z,1513225443.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:04.030Z,1513225444.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:04.391Z,1513225444.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:04.427Z,1513225444.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:04.824Z,1513225444.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:04.878Z,1513225444.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:05.191Z,1513225445.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:05.227Z,1513225445.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:05.597Z,1513225445.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:05.627Z,1513225445.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:06.001Z,1513225446.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:06.080Z,1513225446.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:06.397Z,1513225446.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:06.432Z,1513225446.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:06.791Z,1513225446.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:06.826Z,1513225446.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:07.200Z,1513225447.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:07.229Z,1513225447.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:07.598Z,1513225447.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:07.632Z,1513225447.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:08.006Z,1513225448.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:08.039Z,1513225448.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:08.401Z,1513225448.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:08.429Z,1513225448.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:08.785Z,1513225448.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:08.799Z,1513225448.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:09.207Z,1513225449.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:09.241Z,1513225449.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:09.609Z,1513225449.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:09.636Z,1513225449.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:10.006Z,1513225450.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:10.039Z,1513225450.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:10.405Z,1513225450.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:10.436Z,1513225450.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:10.798Z,1513225450.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:10.843Z,1513225450.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:11.198Z,1513225451.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:11.212Z,1513225451.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:11.602Z,1513225451.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:11.616Z,1513225451.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.002Z,1513225452.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:12.016Z,1513225452.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.423Z,1513225452.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:12.455Z,1513225452.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.810Z,1513225452.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:12.826Z,1513225452.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.826Z,1513225452.826 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2017-12-14T04:24:12.826Z,1513225452.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:24:12.828Z,1513225452.828 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.828Z,1513225452.828 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2017-12-14T04:24:12.828Z,1513225452.828 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:24:12.830Z,1513225452.830 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:12.830Z,1513225452.830 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2017-12-14T04:24:12.830Z,1513225452.830 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:24:12.842Z,1513225452.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:24:12.843Z,1513225452.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:24:12.857Z,1513225452.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:24:13.187Z,1513225453.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:13.246Z,1513225453.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:24:13.246Z,1513225453.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2017-12-14T04:24:13.247Z,1513225453.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:24:13.247Z,1513225453.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2017-12-14T04:24:13.247Z,1513225453.247 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:24:13.247Z,1513225453.247 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2017-12-14T04:24:13.597Z,1513225453.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:13.621Z,1513225453.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:24:13.622Z,1513225453.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:24:13.622Z,1513225453.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:24:13.622Z,1513225453.622 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:24:13.623Z,1513225453.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:24:13.623Z,1513225453.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:24:13.623Z,1513225453.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:24:13.624Z,1513225453.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:24:13.624Z,1513225453.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:24:14.020Z,1513225454.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:14.035Z,1513225454.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:14.413Z,1513225454.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:14.435Z,1513225454.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:14.794Z,1513225454.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:14.826Z,1513225454.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:15.224Z,1513225455.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:15.240Z,1513225455.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:15.640Z,1513225455.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:15.692Z,1513225455.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:16.001Z,1513225456.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:16.027Z,1513225456.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:16.402Z,1513225456.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:16.416Z,1513225456.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:16.796Z,1513225456.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:16.811Z,1513225456.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:17.193Z,1513225457.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:17.216Z,1513225457.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:17.598Z,1513225457.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:17.613Z,1513225457.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:18.002Z,1513225458.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:18.017Z,1513225458.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:18.402Z,1513225458.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:18.417Z,1513225458.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:18.833Z,1513225458.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:18.869Z,1513225458.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:19.187Z,1513225459.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:19.224Z,1513225459.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:19.611Z,1513225459.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:19.626Z,1513225459.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:20.013Z,1513225460.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:20.028Z,1513225460.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:20.398Z,1513225460.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:20.430Z,1513225460.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:20.791Z,1513225460.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:20.830Z,1513225460.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:21.195Z,1513225461.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:21.231Z,1513225461.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:21.603Z,1513225461.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:21.634Z,1513225461.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:22.010Z,1513225462.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:22.071Z,1513225462.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:22.414Z,1513225462.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:22.450Z,1513225462.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:22.794Z,1513225462.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:22.821Z,1513225462.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:23.201Z,1513225463.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:23.216Z,1513225463.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:23.604Z,1513225463.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:23.626Z,1513225463.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:24.006Z,1513225464.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:24.027Z,1513225464.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:24.410Z,1513225464.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:24.431Z,1513225464.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:24.796Z,1513225464.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:24.820Z,1513225464.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:25.218Z,1513225465.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:25.299Z,1513225465.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:28.872Z,1513225468.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:28.938Z,1513225468.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:29.050Z,1513225469.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:29.079Z,1513225469.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:29.424Z,1513225469.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:29.447Z,1513225469.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:29.820Z,1513225469.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:29.835Z,1513225469.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:30.210Z,1513225470.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:30.268Z,1513225470.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:30.624Z,1513225470.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:30.639Z,1513225470.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:31.028Z,1513225471.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:31.091Z,1513225471.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:31.429Z,1513225471.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:31.444Z,1513225471.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:31.841Z,1513225471.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:31.855Z,1513225471.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:32.204Z,1513225472.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:32.219Z,1513225472.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:32.617Z,1513225472.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:32.641Z,1513225472.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:33.041Z,1513225473.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:33.056Z,1513225473.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:33.425Z,1513225473.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:33.440Z,1513225473.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:33.812Z,1513225473.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:33.840Z,1513225473.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:34.202Z,1513225474.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:34.223Z,1513225474.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:34.617Z,1513225474.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:34.645Z,1513225474.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:35.017Z,1513225475.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:35.112Z,1513225475.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:35.420Z,1513225475.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:35.434Z,1513225475.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:35.814Z,1513225475.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:35.829Z,1513225475.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:36.211Z,1513225476.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:36.231Z,1513225476.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:36.625Z,1513225476.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:36.640Z,1513225476.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:37.036Z,1513225477.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:37.118Z,1513225477.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:37.416Z,1513225477.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:37.443Z,1513225477.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:37.816Z,1513225477.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:37.863Z,1513225477.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:38.212Z,1513225478.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:38.231Z,1513225478.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:38.619Z,1513225478.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:38.634Z,1513225478.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:39.024Z,1513225479.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:39.040Z,1513225479.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:39.425Z,1513225479.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:39.475Z,1513225479.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:39.822Z,1513225479.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:39.836Z,1513225479.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:40.213Z,1513225480.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:40.228Z,1513225480.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:40.624Z,1513225480.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:40.639Z,1513225480.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:41.076Z,1513225481.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:41.095Z,1513225481.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:41.414Z,1513225481.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:41.450Z,1513225481.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:41.808Z,1513225481.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:41.840Z,1513225481.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:42.203Z,1513225482.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:42.240Z,1513225482.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:42.631Z,1513225482.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:42.647Z,1513225482.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:43.018Z,1513225483.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:43.054Z,1513225483.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:43.414Z,1513225483.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:43.448Z,1513225483.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:43.803Z,1513225483.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:43.818Z,1513225483.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:44.223Z,1513225484.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:44.307Z,1513225484.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:44.614Z,1513225484.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:44.629Z,1513225484.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:45.025Z,1513225485.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:45.040Z,1513225485.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:45.427Z,1513225485.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:45.447Z,1513225485.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:45.815Z,1513225485.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:45.831Z,1513225485.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:46.214Z,1513225486.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:46.228Z,1513225486.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:46.622Z,1513225486.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:46.636Z,1513225486.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:47.030Z,1513225487.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:47.044Z,1513225487.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:47.464Z,1513225487.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:47.518Z,1513225487.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:47.815Z,1513225487.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:47.830Z,1513225487.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:47.985Z,1513225487.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:48.206Z,1513225488.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:48.239Z,1513225488.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:48.625Z,1513225488.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:48.641Z,1513225488.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:48.781Z,1513225488.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:49.042Z,1513225489.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:49.127Z,1513225489.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:49.427Z,1513225489.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:49.442Z,1513225489.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:49.804Z,1513225489.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:49.835Z,1513225489.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:50.204Z,1513225490.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:50.236Z,1513225490.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:50.635Z,1513225490.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:50.658Z,1513225490.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:51.052Z,1513225491.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:51.111Z,1513225491.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:51.422Z,1513225491.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:51.483Z,1513225491.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:51.808Z,1513225491.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:51.827Z,1513225491.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:52.203Z,1513225492.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:52.240Z,1513225492.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:52.614Z,1513225492.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:52.716Z,1513225492.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:53.026Z,1513225493.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:53.044Z,1513225493.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:53.426Z,1513225493.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:53.467Z,1513225493.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:53.811Z,1513225493.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:53.863Z,1513225493.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:54.215Z,1513225494.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:54.243Z,1513225494.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:54.621Z,1513225494.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:54.644Z,1513225494.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:55.025Z,1513225495.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:55.059Z,1513225495.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:55.420Z,1513225495.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:55.436Z,1513225495.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:55.811Z,1513225495.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:55.831Z,1513225495.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:56.200Z,1513225496.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:56.226Z,1513225496.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:56.625Z,1513225496.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:56.640Z,1513225496.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:57.028Z,1513225497.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:57.083Z,1513225497.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:57.413Z,1513225497.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:57.447Z,1513225497.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:57.807Z,1513225497.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:57.842Z,1513225497.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:58.206Z,1513225498.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:58.220Z,1513225498.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:58.617Z,1513225498.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:58.644Z,1513225498.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:59.021Z,1513225499.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:59.044Z,1513225499.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:59.426Z,1513225499.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:59.458Z,1513225499.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:24:59.808Z,1513225499.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:24:59.834Z,1513225499.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:00.227Z,1513225500.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:00.266Z,1513225500.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:00.613Z,1513225500.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:00.635Z,1513225500.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:01.017Z,1513225501.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:01.031Z,1513225501.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:01.422Z,1513225501.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:01.436Z,1513225501.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:01.802Z,1513225501.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:01.844Z,1513225501.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:02.207Z,1513225502.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:02.222Z,1513225502.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:02.622Z,1513225502.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:02.655Z,1513225502.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:03.056Z,1513225503.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:03.132Z,1513225503.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:03.444Z,1513225503.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:03.467Z,1513225503.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:03.818Z,1513225503.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:03.833Z,1513225503.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:04.212Z,1513225504.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:04.226Z,1513225504.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:04.622Z,1513225504.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:04.636Z,1513225504.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:05.020Z,1513225505.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:05.121Z,1513225505.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:05.418Z,1513225505.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:05.441Z,1513225505.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:05.804Z,1513225505.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:05.830Z,1513225505.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:06.204Z,1513225506.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:06.230Z,1513225506.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:06.651Z,1513225506.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:06.806Z,1513225506.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:07.029Z,1513225507.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:07.044Z,1513225507.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:07.421Z,1513225507.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:07.436Z,1513225507.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:07.803Z,1513225507.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:07.834Z,1513225507.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:08.196Z,1513225508.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:08.211Z,1513225508.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:08.614Z,1513225508.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:08.651Z,1513225508.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:09.037Z,1513225509.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:09.059Z,1513225509.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:09.421Z,1513225509.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:09.451Z,1513225509.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:09.810Z,1513225509.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:09.825Z,1513225509.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:10.218Z,1513225510.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:10.249Z,1513225510.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:10.621Z,1513225510.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:10.654Z,1513225510.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:11.022Z,1513225511.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:11.051Z,1513225511.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:11.418Z,1513225511.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:11.450Z,1513225511.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:11.803Z,1513225511.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:11.847Z,1513225511.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:12.203Z,1513225512.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:12.243Z,1513225512.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:12.634Z,1513225512.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:12.655Z,1513225512.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:13.027Z,1513225513.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:13.127Z,1513225513.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:13.426Z,1513225513.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:13.455Z,1513225513.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:13.808Z,1513225513.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:13.870Z,1513225513.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:14.208Z,1513225514.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:14.223Z,1513225514.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:14.618Z,1513225514.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:14.633Z,1513225514.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:15.017Z,1513225515.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:15.063Z,1513225515.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:15.417Z,1513225515.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:15.432Z,1513225515.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:15.810Z,1513225515.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:15.863Z,1513225515.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:16.216Z,1513225516.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:16.259Z,1513225516.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:16.622Z,1513225516.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:16.637Z,1513225516.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:17.022Z,1513225517.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:17.125Z,1513225517.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:17.426Z,1513225517.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:17.447Z,1513225517.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:17.813Z,1513225517.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:17.827Z,1513225517.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:18.210Z,1513225518.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:18.231Z,1513225518.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:18.627Z,1513225518.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:18.647Z,1513225518.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:19.047Z,1513225519.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:19.098Z,1513225519.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:19.452Z,1513225519.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:19.483Z,1513225519.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:19.806Z,1513225519.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:19.836Z,1513225519.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:20.202Z,1513225520.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:20.229Z,1513225520.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:20.628Z,1513225520.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:20.643Z,1513225520.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:21.038Z,1513225521.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:21.059Z,1513225521.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:21.422Z,1513225521.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:21.442Z,1513225521.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:21.803Z,1513225521.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:21.834Z,1513225521.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:22.207Z,1513225522.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:22.235Z,1513225522.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:22.624Z,1513225522.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:22.649Z,1513225522.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:23.021Z,1513225523.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:23.052Z,1513225523.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:23.423Z,1513225523.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:23.445Z,1513225523.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:23.809Z,1513225523.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:23.823Z,1513225523.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:24.214Z,1513225524.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:24.263Z,1513225524.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:24.621Z,1513225524.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:24.652Z,1513225524.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:25.017Z,1513225525.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:25.032Z,1513225525.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:25.416Z,1513225525.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:25.430Z,1513225525.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:28.909Z,1513225528.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:28.924Z,1513225528.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:29.021Z,1513225529.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:29.062Z,1513225529.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:29.382Z,1513225529.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:29.412Z,1513225529.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:29.804Z,1513225529.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:29.820Z,1513225529.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:30.190Z,1513225530.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:30.212Z,1513225530.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:30.575Z,1513225530.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:30.590Z,1513225530.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:30.976Z,1513225530.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:30.990Z,1513225530.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:31.376Z,1513225531.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:31.403Z,1513225531.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:31.793Z,1513225531.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:31.808Z,1513225531.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:32.192Z,1513225532.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:32.208Z,1513225532.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:32.589Z,1513225532.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:32.611Z,1513225532.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:32.979Z,1513225532.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:32.995Z,1513225532.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:33.379Z,1513225533.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:33.411Z,1513225533.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:33.771Z,1513225533.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:33.807Z,1513225533.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:34.171Z,1513225534.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:34.204Z,1513225534.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:34.575Z,1513225534.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:34.595Z,1513225534.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:34.982Z,1513225534.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:35.071Z,1513225535.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:35.395Z,1513225535.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:35.437Z,1513225535.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:35.792Z,1513225535.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:35.806Z,1513225535.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:36.181Z,1513225536.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:36.196Z,1513225536.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:36.577Z,1513225536.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:36.603Z,1513225536.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:36.979Z,1513225536.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:36.999Z,1513225536.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:37.376Z,1513225537.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:37.404Z,1513225537.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:37.789Z,1513225537.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:37.804Z,1513225537.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:38.189Z,1513225538.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:38.203Z,1513225538.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:38.603Z,1513225538.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:38.634Z,1513225538.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:38.979Z,1513225538.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:38.993Z,1513225538.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:39.379Z,1513225539.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:39.387Z,1513225539.387 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:25:39.387Z,1513225539.387 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:25:39.387Z,1513225539.387 [BPC1](ERROR): Communications Fault
2017-12-14T04:25:39.399Z,1513225539.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:39.412Z,1513225539.412 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:25:39.788Z,1513225539.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:39.803Z,1513225539.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:40.188Z,1513225540.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:40.202Z,1513225540.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:40.588Z,1513225540.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:40.612Z,1513225540.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:40.638Z,1513225540.638 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:25:40.638Z,1513225540.638 [BPC1] No Fault, FailCount= 1
2017-12-14T04:25:40.989Z,1513225540.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:41.055Z,1513225541.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:41.394Z,1513225541.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:41.408Z,1513225541.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:41.782Z,1513225541.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:41.808Z,1513225541.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:42.171Z,1513225542.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:42.198Z,1513225542.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:42.570Z,1513225542.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:42.606Z,1513225542.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:42.996Z,1513225542.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:43.012Z,1513225543.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:43.393Z,1513225543.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:43.408Z,1513225543.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:43.794Z,1513225543.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:43.808Z,1513225543.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:44.172Z,1513225544.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:44.198Z,1513225544.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:44.585Z,1513225544.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:44.607Z,1513225544.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:45.012Z,1513225545.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:45.134Z,1513225545.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:45.383Z,1513225545.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:45.416Z,1513225545.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:45.778Z,1513225545.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:45.804Z,1513225545.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:46.198Z,1513225546.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:46.213Z,1513225546.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:46.582Z,1513225546.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:46.608Z,1513225546.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:46.972Z,1513225546.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:47.004Z,1513225547.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:47.387Z,1513225547.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:47.422Z,1513225547.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:47.777Z,1513225547.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:47.791Z,1513225547.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:48.178Z,1513225548.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:48.193Z,1513225548.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:48.586Z,1513225548.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:48.601Z,1513225548.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:48.989Z,1513225548.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:49.003Z,1513225549.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:49.390Z,1513225549.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:49.447Z,1513225549.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:49.786Z,1513225549.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:49.805Z,1513225549.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:50.181Z,1513225550.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:50.196Z,1513225550.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:50.576Z,1513225550.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:50.597Z,1513225550.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:50.980Z,1513225550.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:50.995Z,1513225550.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:51.412Z,1513225551.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:51.446Z,1513225551.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:51.786Z,1513225551.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:51.807Z,1513225551.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:52.200Z,1513225552.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:52.219Z,1513225552.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:52.594Z,1513225552.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:52.608Z,1513225552.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:52.971Z,1513225552.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:52.998Z,1513225552.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:53.386Z,1513225553.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:53.410Z,1513225553.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:53.773Z,1513225553.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:53.809Z,1513225553.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:54.170Z,1513225554.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:54.202Z,1513225554.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:54.611Z,1513225554.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:54.650Z,1513225554.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:54.983Z,1513225554.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:55.003Z,1513225555.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:55.394Z,1513225555.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:55.423Z,1513225555.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:55.794Z,1513225555.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:55.821Z,1513225555.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:56.176Z,1513225556.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:56.201Z,1513225556.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:56.571Z,1513225556.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:56.608Z,1513225556.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:56.971Z,1513225556.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:56.998Z,1513225556.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:57.370Z,1513225557.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:57.407Z,1513225557.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:57.791Z,1513225557.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:57.812Z,1513225557.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:58.195Z,1513225558.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:58.216Z,1513225558.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:58.582Z,1513225558.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:58.618Z,1513225558.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:58.975Z,1513225558.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:59.006Z,1513225559.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:59.393Z,1513225559.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:59.408Z,1513225559.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:25:59.777Z,1513225559.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:25:59.806Z,1513225559.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:00.172Z,1513225560.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:00.243Z,1513225560.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:00.580Z,1513225560.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:00.596Z,1513225560.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:01.012Z,1513225561.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:01.113Z,1513225561.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:01.393Z,1513225561.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:01.416Z,1513225561.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:01.794Z,1513225561.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:01.847Z,1513225561.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:02.172Z,1513225562.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:02.207Z,1513225562.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:02.565Z,1513225562.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:02.603Z,1513225562.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:02.972Z,1513225562.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:02.998Z,1513225562.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:03.371Z,1513225563.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:03.404Z,1513225563.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:03.786Z,1513225563.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:03.808Z,1513225563.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:04.199Z,1513225564.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:04.214Z,1513225564.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:04.591Z,1513225564.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:04.606Z,1513225564.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:04.971Z,1513225564.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:04.000Z,1513225565.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:05.390Z,1513225565.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:05.406Z,1513225565.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:05.771Z,1513225565.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:05.803Z,1513225565.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:06.175Z,1513225566.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:06.201Z,1513225566.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:06.571Z,1513225566.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:06.597Z,1513225566.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:06.996Z,1513225566.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:07.011Z,1513225567.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:07.421Z,1513225567.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:07.448Z,1513225567.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:07.790Z,1513225567.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:07.812Z,1513225567.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:08.171Z,1513225568.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:08.202Z,1513225568.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:08.568Z,1513225568.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:08.595Z,1513225568.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:08.983Z,1513225568.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:09.008Z,1513225569.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:09.375Z,1513225569.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:09.412Z,1513225569.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:09.781Z,1513225569.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:09.817Z,1513225569.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:10.197Z,1513225570.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:10.250Z,1513225570.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:10.617Z,1513225570.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:10.674Z,1513225570.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:10.976Z,1513225570.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:10.996Z,1513225570.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:11.376Z,1513225571.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:11.391Z,1513225571.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:11.776Z,1513225571.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:11.791Z,1513225571.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:12.179Z,1513225572.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:12.195Z,1513225572.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:12.579Z,1513225572.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:12.593Z,1513225572.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:12.989Z,1513225572.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:13.004Z,1513225573.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:13.391Z,1513225573.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:13.420Z,1513225573.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:13.793Z,1513225573.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:13.807Z,1513225573.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:14.171Z,1513225574.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:14.204Z,1513225574.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:14.568Z,1513225574.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:14.592Z,1513225574.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:14.971Z,1513225574.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:15.006Z,1513225575.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:15.379Z,1513225575.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:15.414Z,1513225575.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:15.785Z,1513225575.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:15.812Z,1513225575.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:16.203Z,1513225576.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:16.217Z,1513225576.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:16.586Z,1513225576.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:16.612Z,1513225576.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:16.976Z,1513225576.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:17.006Z,1513225577.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:17.380Z,1513225577.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:17.399Z,1513225577.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:17.776Z,1513225577.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:17.794Z,1513225577.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:18.178Z,1513225578.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:18.198Z,1513225578.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:18.593Z,1513225578.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:18.644Z,1513225578.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:18.983Z,1513225578.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:19.019Z,1513225579.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:19.395Z,1513225579.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:19.419Z,1513225579.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:19.791Z,1513225579.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:19.833Z,1513225579.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:20.172Z,1513225580.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:20.207Z,1513225580.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:20.664Z,1513225580.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:20.757Z,1513225580.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:20.983Z,1513225580.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:21.071Z,1513225581.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:21.404Z,1513225581.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:21.479Z,1513225581.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:21.791Z,1513225581.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:21.815Z,1513225581.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:22.193Z,1513225582.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:22.260Z,1513225582.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:22.593Z,1513225582.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:22.650Z,1513225582.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:22.972Z,1513225582.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:23.031Z,1513225583.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:23.373Z,1513225583.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:23.417Z,1513225583.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:23.783Z,1513225583.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:23.821Z,1513225583.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:24.177Z,1513225584.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:24.220Z,1513225584.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:24.583Z,1513225584.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:24.607Z,1513225584.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:25.018Z,1513225585.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:25.103Z,1513225585.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:25.392Z,1513225585.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:25.411Z,1513225585.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:25.774Z,1513225585.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:25.823Z,1513225585.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:30.086Z,1513225590.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:30.128Z,1513225590.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:30.278Z,1513225590.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:30.319Z,1513225590.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:30.673Z,1513225590.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:30.773Z,1513225590.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:31.096Z,1513225591.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:31.167Z,1513225591.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:31.459Z,1513225591.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:31.479Z,1513225591.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:31.868Z,1513225591.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:31.910Z,1513225591.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:32.265Z,1513225592.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:32.322Z,1513225592.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:32.652Z,1513225592.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:32.680Z,1513225592.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:33.045Z,1513225593.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:33.094Z,1513225593.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:33.457Z,1513225593.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:33.509Z,1513225593.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:33.859Z,1513225593.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:33.896Z,1513225593.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:34.271Z,1513225594.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:34.311Z,1513225594.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:34.665Z,1513225594.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:34.773Z,1513225594.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:35.044Z,1513225595.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:35.102Z,1513225595.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:35.444Z,1513225595.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:35.480Z,1513225595.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:35.871Z,1513225595.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:35.927Z,1513225595.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:36.246Z,1513225596.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:36.303Z,1513225596.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:36.659Z,1513225596.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:36.760Z,1513225596.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:37.101Z,1513225597.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:37.155Z,1513225597.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:37.464Z,1513225597.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:37.509Z,1513225597.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:37.851Z,1513225597.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:37.903Z,1513225597.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:38.269Z,1513225598.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:38.310Z,1513225598.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:38.653Z,1513225598.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:38.677Z,1513225598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:39.055Z,1513225599.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:39.089Z,1513225599.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:39.474Z,1513225599.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:39.517Z,1513225599.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:39.871Z,1513225599.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:39.939Z,1513225599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:40.267Z,1513225600.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:40.288Z,1513225600.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:40.665Z,1513225600.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:40.691Z,1513225600.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:41.126Z,1513225601.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:41.182Z,1513225601.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:41.454Z,1513225601.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:41.522Z,1513225601.522 [BPC1](ERROR): Failed to parse message.
2017-12-14T04:26:41.522Z,1513225601.522 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T04:26:41.522Z,1513225601.522 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:26:41.522Z,1513225601.522 [BPC1](ERROR): Data Fault
2017-12-14T04:26:41.555Z,1513225601.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:41.613Z,1513225601.613 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:26:41.872Z,1513225601.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:41.892Z,1513225601.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:42.247Z,1513225602.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:42.279Z,1513225602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:42.653Z,1513225602.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:42.677Z,1513225602.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:42.709Z,1513225602.709 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:26:42.709Z,1513225602.709 [BPC1] No Fault, FailCount= 1
2017-12-14T04:26:43.103Z,1513225603.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:43.253Z,1513225603.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:43.454Z,1513225603.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:43.468Z,1513225603.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:43.851Z,1513225603.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:43.865Z,1513225603.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:44.253Z,1513225604.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:44.267Z,1513225604.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:44.653Z,1513225604.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:44.667Z,1513225604.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:45.055Z,1513225605.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:45.070Z,1513225605.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:45.450Z,1513225605.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:45.471Z,1513225605.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:45.865Z,1513225605.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:45.879Z,1513225605.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:46.265Z,1513225606.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:46.279Z,1513225606.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:46.667Z,1513225606.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:46.754Z,1513225606.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:47.048Z,1513225607.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:47.074Z,1513225607.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:47.522Z,1513225607.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:47.537Z,1513225607.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:47.847Z,1513225607.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:47.875Z,1513225607.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:48.243Z,1513225608.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:48.275Z,1513225608.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:48.653Z,1513225608.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:48.753Z,1513225608.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:49.065Z,1513225609.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:49.093Z,1513225609.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:49.486Z,1513225609.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:49.533Z,1513225609.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:49.852Z,1513225609.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:49.867Z,1513225609.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:50.243Z,1513225610.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:50.257Z,1513225610.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:50.647Z,1513225610.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:50.667Z,1513225610.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:51.044Z,1513225611.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:51.059Z,1513225611.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:51.445Z,1513225611.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:51.484Z,1513225611.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:51.859Z,1513225611.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:51.895Z,1513225611.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:52.257Z,1513225612.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:52.271Z,1513225612.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:52.652Z,1513225612.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:52.718Z,1513225612.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:53.043Z,1513225613.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:53.063Z,1513225613.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:53.444Z,1513225613.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:53.459Z,1513225613.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:53.848Z,1513225613.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:53.862Z,1513225613.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:54.245Z,1513225614.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:54.261Z,1513225614.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:54.657Z,1513225614.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:54.673Z,1513225614.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:55.126Z,1513225615.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:55.142Z,1513225615.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:55.458Z,1513225615.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:55.473Z,1513225615.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:55.844Z,1513225615.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:55.858Z,1513225615.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:56.243Z,1513225616.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:56.257Z,1513225616.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:56.644Z,1513225616.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:56.660Z,1513225616.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:57.123Z,1513225617.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:57.139Z,1513225617.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:57.446Z,1513225617.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:57.461Z,1513225617.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:57.857Z,1513225617.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:57.872Z,1513225617.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:58.261Z,1513225618.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:58.275Z,1513225618.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:58.657Z,1513225618.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:58.672Z,1513225618.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:59.049Z,1513225619.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:59.081Z,1513225619.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:59.443Z,1513225619.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:59.464Z,1513225619.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:26:59.907Z,1513225619.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:26:59.922Z,1513225619.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:00.245Z,1513225620.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:00.260Z,1513225620.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:00.657Z,1513225620.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:00.672Z,1513225620.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:01.057Z,1513225621.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:01.079Z,1513225621.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:01.458Z,1513225621.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:01.479Z,1513225621.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:01.843Z,1513225621.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:01.851Z,1513225621.851 [BPC1](ERROR): Failed to parse message.
2017-12-14T04:27:01.851Z,1513225621.851 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T04:27:01.851Z,1513225621.851 [BPC1] Data Fault, FailCount= 2
2017-12-14T04:27:01.851Z,1513225621.851 [BPC1](ERROR): Data Fault
2017-12-14T04:27:01.860Z,1513225621.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:01.874Z,1513225621.874 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:27:02.244Z,1513225622.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:02.286Z,1513225622.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:02.644Z,1513225622.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:02.659Z,1513225622.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:03.043Z,1513225623.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:03.063Z,1513225623.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:03.076Z,1513225623.076 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:27:03.076Z,1513225623.076 [BPC1] No Fault, FailCount= 2
2017-12-14T04:27:03.446Z,1513225623.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:03.503Z,1513225623.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:03.858Z,1513225623.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:03.872Z,1513225623.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:04.258Z,1513225624.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:04.272Z,1513225624.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:04.649Z,1513225624.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:04.663Z,1513225624.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:05.043Z,1513225625.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:05.063Z,1513225625.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:05.461Z,1513225625.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:05.493Z,1513225625.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:05.847Z,1513225625.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:05.862Z,1513225625.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:06.250Z,1513225626.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:06.265Z,1513225626.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:06.658Z,1513225626.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:06.673Z,1513225626.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:07.057Z,1513225627.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:07.096Z,1513225627.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:07.458Z,1513225627.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:07.472Z,1513225627.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:07.844Z,1513225627.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:07.858Z,1513225627.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:08.241Z,1513225628.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:08.255Z,1513225628.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:08.646Z,1513225628.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:08.669Z,1513225628.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:09.112Z,1513225629.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:09.133Z,1513225629.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:09.446Z,1513225629.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:09.461Z,1513225629.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:09.857Z,1513225629.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:09.872Z,1513225629.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:10.257Z,1513225630.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:10.279Z,1513225630.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:10.650Z,1513225630.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:10.689Z,1513225630.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:11.109Z,1513225631.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:11.131Z,1513225631.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:11.444Z,1513225631.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:11.462Z,1513225631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:11.844Z,1513225631.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:11.899Z,1513225631.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:12.243Z,1513225632.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:12.271Z,1513225632.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:12.654Z,1513225632.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:12.728Z,1513225632.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.057Z,1513225633.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:13.083Z,1513225633.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.454Z,1513225633.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:13.479Z,1513225633.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.843Z,1513225633.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:13.886Z,1513225633.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.886Z,1513225633.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2017-12-14T04:27:13.886Z,1513225633.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:27:13.888Z,1513225633.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.888Z,1513225633.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2017-12-14T04:27:13.888Z,1513225633.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:27:13.894Z,1513225633.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:13.894Z,1513225633.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2017-12-14T04:27:13.894Z,1513225633.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:27:13.910Z,1513225633.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:27:13.910Z,1513225633.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:27:13.910Z,1513225633.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:27:14.243Z,1513225634.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:14.290Z,1513225634.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:27:14.290Z,1513225634.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2017-12-14T04:27:14.290Z,1513225634.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:27:14.291Z,1513225634.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2017-12-14T04:27:14.291Z,1513225634.291 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:27:14.291Z,1513225634.291 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2017-12-14T04:27:14.644Z,1513225634.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:14.670Z,1513225634.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:27:14.670Z,1513225634.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:27:14.671Z,1513225634.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:27:14.671Z,1513225634.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:27:14.671Z,1513225634.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:27:14.672Z,1513225634.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:27:14.672Z,1513225634.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:27:14.672Z,1513225634.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:27:14.694Z,1513225634.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:27:15.045Z,1513225635.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:15.115Z,1513225635.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:15.443Z,1513225635.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:15.479Z,1513225635.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:15.859Z,1513225635.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:15.883Z,1513225635.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:16.261Z,1513225636.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:16.286Z,1513225636.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:16.653Z,1513225636.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:16.787Z,1513225636.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:17.047Z,1513225637.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:17.062Z,1513225637.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:17.452Z,1513225637.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:17.507Z,1513225637.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:17.853Z,1513225637.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:17.868Z,1513225637.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:18.257Z,1513225638.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:18.316Z,1513225638.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:18.655Z,1513225638.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:18.670Z,1513225638.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:19.060Z,1513225639.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:19.090Z,1513225639.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:19.461Z,1513225639.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:19.484Z,1513225639.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:19.846Z,1513225639.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:19.879Z,1513225639.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:20.246Z,1513225640.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:20.273Z,1513225640.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:20.648Z,1513225640.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:20.674Z,1513225640.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:21.067Z,1513225641.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:21.082Z,1513225641.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:21.481Z,1513225641.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:21.531Z,1513225641.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:21.859Z,1513225641.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:21.888Z,1513225641.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:22.270Z,1513225642.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:22.284Z,1513225642.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:22.657Z,1513225642.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:22.687Z,1513225642.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:23.108Z,1513225643.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:23.139Z,1513225643.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:23.450Z,1513225643.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:23.488Z,1513225643.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:23.852Z,1513225643.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:23.866Z,1513225643.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:24.250Z,1513225644.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:24.264Z,1513225644.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:24.268Z,1513225644.268 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:22:24.2Z
2017-12-14T04:27:24.268Z,1513225644.268 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:27:24.268Z,1513225644.268 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:27:24.704Z,1513225644.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:24.751Z,1513225644.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:25.556Z,1513225645.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:25.575Z,1513225645.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:25.684Z,1513225645.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:25.711Z,1513225645.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:29.200Z,1513225649.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:29.264Z,1513225649.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:29.344Z,1513225649.344 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0092.lzma
2017-12-14T04:27:29.364Z,1513225649.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:29.380Z,1513225649.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:29.729Z,1513225649.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:29.755Z,1513225649.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:30.104Z,1513225650.104 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0092.lzma.bak
2017-12-14T04:27:30.104Z,1513225650.104 [DataOverHttps](INFO): SBD MOMSN=5437653
2017-12-14T04:27:30.152Z,1513225650.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:30.167Z,1513225650.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:31.714Z,1513225651.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:31.735Z,1513225651.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:31.835Z,1513225651.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:31.879Z,1513225651.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:35.405Z,1513225655.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:35.427Z,1513225655.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:35.524Z,1513225655.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:35.566Z,1513225655.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:35.912Z,1513225655.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:35.927Z,1513225655.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:36.325Z,1513225656.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:36.364Z,1513225656.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:36.713Z,1513225656.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:36.728Z,1513225656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:37.125Z,1513225657.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:37.173Z,1513225657.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:40.529Z,1513225660.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:40.587Z,1513225660.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:40.654Z,1513225660.654 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0093.lzma
2017-12-14T04:27:40.770Z,1513225660.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:40.811Z,1513225660.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:41.062Z,1513225661.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:41.126Z,1513225661.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:41.423Z,1513225661.423 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0093.lzma.bak
2017-12-14T04:27:41.423Z,1513225661.423 [DataOverHttps](INFO): SBD MOMSN=5437655
2017-12-14T04:27:41.475Z,1513225661.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:41.499Z,1513225661.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:42.654Z,1513225662.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:42.758Z,1513225662.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:42.778Z,1513225662.778 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:27:42.778Z,1513225662.778 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:27:42.778Z,1513225662.778 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:27:42.846Z,1513225662.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:42.876Z,1513225662.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:46.272Z,1513225666.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:46.326Z,1513225666.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:46.407Z,1513225666.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:46.448Z,1513225666.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:46.793Z,1513225666.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:46.851Z,1513225666.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:47.234Z,1513225667.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:47.282Z,1513225667.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:47.586Z,1513225667.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:47.601Z,1513225667.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:47.984Z,1513225667.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:47.998Z,1513225667.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:48.379Z,1513225668.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:48.393Z,1513225668.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:48.825Z,1513225668.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:48.857Z,1513225668.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:49.189Z,1513225669.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:49.204Z,1513225669.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:49.590Z,1513225669.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:49.604Z,1513225669.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:49.994Z,1513225669.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:50.009Z,1513225670.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:50.415Z,1513225670.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:50.479Z,1513225670.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:50.784Z,1513225670.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:50.803Z,1513225670.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:51.182Z,1513225671.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:51.209Z,1513225671.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:51.586Z,1513225671.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:51.607Z,1513225671.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:51.994Z,1513225671.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:52.008Z,1513225672.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:52.394Z,1513225672.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:52.493Z,1513225672.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:52.792Z,1513225672.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:52.811Z,1513225672.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:53.184Z,1513225673.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:53.199Z,1513225673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:53.597Z,1513225673.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:53.620Z,1513225673.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:53.984Z,1513225673.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:54.003Z,1513225674.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:54.372Z,1513225674.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:54.436Z,1513225674.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:54.793Z,1513225674.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:54.811Z,1513225674.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:55.202Z,1513225675.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:55.216Z,1513225675.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:55.599Z,1513225675.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:55.614Z,1513225675.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:56.014Z,1513225676.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:56.049Z,1513225676.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:56.377Z,1513225676.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:56.403Z,1513225676.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:56.808Z,1513225676.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:56.869Z,1513225676.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:57.192Z,1513225677.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:57.222Z,1513225677.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:57.586Z,1513225677.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:57.613Z,1513225677.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:57.993Z,1513225677.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:58.020Z,1513225678.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:58.397Z,1513225678.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:58.424Z,1513225678.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:58.798Z,1513225678.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:58.823Z,1513225678.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:59.185Z,1513225679.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:59.201Z,1513225679.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:59.577Z,1513225679.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:27:59.592Z,1513225679.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:27:59.998Z,1513225679.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:00.024Z,1513225680.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:00.388Z,1513225680.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:00.439Z,1513225680.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:00.794Z,1513225680.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:00.825Z,1513225680.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:01.197Z,1513225681.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:01.229Z,1513225681.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:01.586Z,1513225681.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:01.639Z,1513225681.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:01.987Z,1513225681.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:02.002Z,1513225682.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:02.391Z,1513225682.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:02.406Z,1513225682.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:02.815Z,1513225682.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:02.842Z,1513225682.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:03.221Z,1513225683.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:03.266Z,1513225683.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:03.596Z,1513225683.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:03.611Z,1513225683.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:04.007Z,1513225684.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:04.027Z,1513225684.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:04.400Z,1513225684.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:04.415Z,1513225684.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:04.791Z,1513225684.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:04.807Z,1513225684.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:05.194Z,1513225685.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:05.259Z,1513225685.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:05.598Z,1513225685.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:05.615Z,1513225685.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:06.002Z,1513225686.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:06.074Z,1513225686.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:06.385Z,1513225686.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:06.420Z,1513225686.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:06.838Z,1513225686.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:06.886Z,1513225686.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:07.191Z,1513225687.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:07.215Z,1513225687.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:07.594Z,1513225687.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:07.640Z,1513225687.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:07.998Z,1513225687.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:08.027Z,1513225688.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:08.393Z,1513225688.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:08.423Z,1513225688.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:08.785Z,1513225688.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:08.824Z,1513225688.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:09.182Z,1513225689.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:09.196Z,1513225689.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:09.604Z,1513225689.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:09.656Z,1513225689.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:09.997Z,1513225689.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:10.022Z,1513225690.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:10.394Z,1513225690.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:10.424Z,1513225690.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:10.784Z,1513225690.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:10.816Z,1513225690.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:11.192Z,1513225691.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:11.208Z,1513225691.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:11.584Z,1513225691.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:11.603Z,1513225691.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:11.994Z,1513225691.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:12.009Z,1513225692.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:12.394Z,1513225692.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:12.408Z,1513225692.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:12.814Z,1513225692.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:12.861Z,1513225692.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:13.174Z,1513225693.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:13.210Z,1513225693.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:13.575Z,1513225693.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:13.607Z,1513225693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:14.004Z,1513225694.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:14.023Z,1513225694.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:14.376Z,1513225694.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:14.411Z,1513225694.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:14.801Z,1513225694.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:14.815Z,1513225694.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:15.198Z,1513225695.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:15.219Z,1513225695.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:15.598Z,1513225695.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:15.619Z,1513225695.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:15.975Z,1513225695.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:16.056Z,1513225696.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:16.376Z,1513225696.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:16.407Z,1513225696.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:16.825Z,1513225696.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:16.867Z,1513225696.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:17.175Z,1513225697.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:17.216Z,1513225697.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:17.611Z,1513225697.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:17.680Z,1513225697.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:18.010Z,1513225698.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:18.049Z,1513225698.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:18.385Z,1513225698.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:18.412Z,1513225698.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:18.775Z,1513225698.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:18.803Z,1513225698.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:19.191Z,1513225699.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:19.229Z,1513225699.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:19.579Z,1513225699.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:19.620Z,1513225699.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:19.986Z,1513225699.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:20.006Z,1513225700.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:20.402Z,1513225700.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:20.417Z,1513225700.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:20.786Z,1513225700.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:20.807Z,1513225700.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:21.202Z,1513225701.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:21.224Z,1513225701.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:21.608Z,1513225701.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:21.623Z,1513225701.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:21.976Z,1513225701.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:22.011Z,1513225702.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:22.394Z,1513225702.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:22.447Z,1513225702.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:22.794Z,1513225702.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:22.815Z,1513225702.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:23.198Z,1513225703.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:23.219Z,1513225703.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:23.596Z,1513225703.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:23.618Z,1513225703.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:23.986Z,1513225703.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:24.008Z,1513225704.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:24.375Z,1513225704.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:24.408Z,1513225704.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:24.776Z,1513225704.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:24.820Z,1513225704.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:25.175Z,1513225705.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:25.211Z,1513225705.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:25.595Z,1513225705.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:25.654Z,1513225705.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:26.002Z,1513225706.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:26.023Z,1513225706.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:26.403Z,1513225706.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:26.423Z,1513225706.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:26.794Z,1513225706.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:26.810Z,1513225706.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:27.179Z,1513225707.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:27.204Z,1513225707.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:27.583Z,1513225707.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:27.681Z,1513225707.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:27.978Z,1513225707.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:28.082Z,1513225708.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:28.376Z,1513225708.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:28.391Z,1513225708.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:28.788Z,1513225708.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:28.852Z,1513225708.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:29.190Z,1513225709.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:29.211Z,1513225709.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:29.586Z,1513225709.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:29.646Z,1513225709.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:29.974Z,1513225709.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:29.999Z,1513225709.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:30.379Z,1513225710.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:30.410Z,1513225710.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:30.798Z,1513225710.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:30.825Z,1513225710.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:31.175Z,1513225711.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:31.199Z,1513225711.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:31.585Z,1513225711.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:31.622Z,1513225711.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:31.998Z,1513225711.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:32.067Z,1513225712.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:32.406Z,1513225712.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:32.438Z,1513225712.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:32.785Z,1513225712.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:32.803Z,1513225712.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:33.191Z,1513225713.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:33.206Z,1513225713.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:33.591Z,1513225713.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:33.606Z,1513225713.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:33.993Z,1513225713.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:34.009Z,1513225714.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:34.388Z,1513225714.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:34.404Z,1513225714.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:34.794Z,1513225714.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:34.815Z,1513225714.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:35.181Z,1513225715.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:35.208Z,1513225715.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:35.575Z,1513225715.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:35.606Z,1513225715.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:35.980Z,1513225715.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:36.012Z,1513225716.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:36.378Z,1513225716.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:36.414Z,1513225716.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:36.787Z,1513225716.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:36.815Z,1513225716.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:37.206Z,1513225717.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:37.221Z,1513225717.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:37.586Z,1513225717.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:37.615Z,1513225717.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:37.976Z,1513225717.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:38.016Z,1513225718.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:38.423Z,1513225718.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:38.466Z,1513225718.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:38.776Z,1513225718.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:38.825Z,1513225718.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:39.177Z,1513225719.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:39.209Z,1513225719.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:39.578Z,1513225719.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:39.596Z,1513225719.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:39.994Z,1513225719.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:40.019Z,1513225720.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:40.387Z,1513225720.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:40.420Z,1513225720.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:40.795Z,1513225720.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:40.822Z,1513225720.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:41.181Z,1513225721.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:41.195Z,1513225721.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:41.592Z,1513225721.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:41.628Z,1513225721.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:41.983Z,1513225721.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:42.003Z,1513225722.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:42.385Z,1513225722.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:42.400Z,1513225722.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:42.788Z,1513225722.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:42.807Z,1513225722.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:43.199Z,1513225723.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:43.232Z,1513225723.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:46.783Z,1513225726.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:46.803Z,1513225726.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:46.902Z,1513225726.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:46.930Z,1513225726.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:47.291Z,1513225727.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:47.306Z,1513225727.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:47.692Z,1513225727.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:47.706Z,1513225727.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:48.086Z,1513225728.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:48.162Z,1513225728.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:48.489Z,1513225728.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:48.509Z,1513225728.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:48.899Z,1513225728.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:48.919Z,1513225728.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:49.298Z,1513225729.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:49.319Z,1513225729.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:49.699Z,1513225729.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:49.766Z,1513225729.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:50.073Z,1513225730.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:50.124Z,1513225730.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:50.480Z,1513225730.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:50.506Z,1513225730.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:50.876Z,1513225730.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:50.942Z,1513225730.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:51.318Z,1513225731.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:51.356Z,1513225731.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:51.696Z,1513225731.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:51.754Z,1513225731.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:52.097Z,1513225732.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:52.119Z,1513225732.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:52.477Z,1513225732.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:52.512Z,1513225732.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:52.875Z,1513225732.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:52.907Z,1513225732.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:53.279Z,1513225733.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:53.305Z,1513225733.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:53.676Z,1513225733.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:53.707Z,1513225733.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:54.078Z,1513225734.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:54.105Z,1513225734.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:54.516Z,1513225734.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:54.574Z,1513225734.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:54.895Z,1513225734.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:54.911Z,1513225734.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:55.297Z,1513225735.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:55.312Z,1513225735.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:55.693Z,1513225735.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:55.719Z,1513225735.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:56.078Z,1513225736.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:56.104Z,1513225736.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:56.481Z,1513225736.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:56.507Z,1513225736.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:56.875Z,1513225736.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:56.911Z,1513225736.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:57.286Z,1513225737.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:57.312Z,1513225737.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:57.737Z,1513225737.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:57.760Z,1513225737.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:58.095Z,1513225738.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:58.118Z,1513225738.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:58.505Z,1513225738.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:58.519Z,1513225738.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:58.892Z,1513225738.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:58.917Z,1513225738.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:59.276Z,1513225739.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:59.292Z,1513225739.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:28:59.681Z,1513225739.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:28:59.696Z,1513225739.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:00.082Z,1513225740.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:00.128Z,1513225740.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:00.484Z,1513225740.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:00.499Z,1513225740.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:00.943Z,1513225740.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:00.990Z,1513225740.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:01.300Z,1513225741.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:01.319Z,1513225741.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:01.692Z,1513225741.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:01.707Z,1513225741.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:02.083Z,1513225742.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:02.097Z,1513225742.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:02.471Z,1513225742.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:02.496Z,1513225742.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:02.892Z,1513225742.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:02.912Z,1513225742.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:02.934Z,1513225742.934 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:29:03.293Z,1513225743.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:03.308Z,1513225743.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:03.694Z,1513225743.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:03.709Z,1513225743.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:04.096Z,1513225744.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:04.112Z,1513225744.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:04.496Z,1513225744.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:04.511Z,1513225744.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:04.884Z,1513225744.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:04.899Z,1513225744.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:05.288Z,1513225745.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:05.303Z,1513225745.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:05.686Z,1513225745.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:05.701Z,1513225745.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:06.090Z,1513225746.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:06.117Z,1513225746.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:06.487Z,1513225746.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:06.504Z,1513225746.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:06.518Z,1513225746.518 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T04:29:06.518Z,1513225746.518 [DropWeight] No Fault, FailCount= 1
2017-12-14T04:29:06.894Z,1513225746.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:06.908Z,1513225746.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:07.314Z,1513225747.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:07.351Z,1513225747.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:07.706Z,1513225747.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:07.721Z,1513225747.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:08.092Z,1513225748.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:08.107Z,1513225748.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:08.477Z,1513225748.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:08.512Z,1513225748.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:08.876Z,1513225748.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:08.901Z,1513225748.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:09.275Z,1513225749.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:09.304Z,1513225749.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:09.695Z,1513225749.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:09.710Z,1513225749.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:10.099Z,1513225750.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:10.114Z,1513225750.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:10.514Z,1513225750.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:10.566Z,1513225750.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:10.874Z,1513225750.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:10.906Z,1513225750.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:11.274Z,1513225751.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:11.311Z,1513225751.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:11.675Z,1513225751.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:11.701Z,1513225751.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:12.076Z,1513225752.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:12.127Z,1513225752.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:12.479Z,1513225752.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:12.531Z,1513225752.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:12.897Z,1513225752.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:12.912Z,1513225752.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:13.298Z,1513225753.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:13.358Z,1513225753.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:13.712Z,1513225753.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:13.756Z,1513225753.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:14.073Z,1513225754.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:14.132Z,1513225754.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:14.479Z,1513225754.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:14.505Z,1513225754.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:14.878Z,1513225754.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:14.905Z,1513225754.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:15.276Z,1513225755.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:15.308Z,1513225755.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:15.690Z,1513225755.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:15.714Z,1513225755.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:16.090Z,1513225756.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:16.116Z,1513225756.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:16.494Z,1513225756.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:16.509Z,1513225756.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:16.872Z,1513225756.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:16.931Z,1513225756.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:17.292Z,1513225757.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:17.327Z,1513225757.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:17.681Z,1513225757.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:17.713Z,1513225757.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:18.081Z,1513225758.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:18.097Z,1513225758.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:18.480Z,1513225758.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:18.499Z,1513225758.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:18.888Z,1513225758.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:18.929Z,1513225758.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:19.294Z,1513225759.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:19.308Z,1513225759.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:19.697Z,1513225759.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:19.712Z,1513225759.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:20.087Z,1513225760.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:20.102Z,1513225760.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:20.481Z,1513225760.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:20.508Z,1513225760.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:20.876Z,1513225760.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:20.901Z,1513225760.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:21.287Z,1513225761.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:21.301Z,1513225761.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:21.695Z,1513225761.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:21.710Z,1513225761.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:22.102Z,1513225762.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:22.116Z,1513225762.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:22.497Z,1513225762.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:22.539Z,1513225762.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:22.875Z,1513225762.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:22.902Z,1513225762.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:23.311Z,1513225763.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:23.354Z,1513225763.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:23.676Z,1513225763.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:23.704Z,1513225763.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:24.076Z,1513225764.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:24.108Z,1513225764.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:24.479Z,1513225764.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:24.511Z,1513225764.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:24.901Z,1513225764.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:24.916Z,1513225764.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:25.295Z,1513225765.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:25.322Z,1513225765.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:25.694Z,1513225765.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:25.715Z,1513225765.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:26.079Z,1513225766.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:26.105Z,1513225766.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:26.495Z,1513225766.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:26.527Z,1513225766.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:26.877Z,1513225766.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:26.911Z,1513225766.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:27.277Z,1513225767.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:27.292Z,1513225767.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:27.691Z,1513225767.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:27.716Z,1513225767.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:28.106Z,1513225768.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:28.121Z,1513225768.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:28.495Z,1513225768.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:28.520Z,1513225768.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:28.878Z,1513225768.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:28.892Z,1513225768.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:29.283Z,1513225769.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:29.319Z,1513225769.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:29.728Z,1513225769.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:29.813Z,1513225769.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:30.083Z,1513225770.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:30.104Z,1513225770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:30.489Z,1513225770.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:30.504Z,1513225770.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:30.889Z,1513225770.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:30.905Z,1513225770.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:31.297Z,1513225771.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:31.331Z,1513225771.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:31.691Z,1513225771.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:31.707Z,1513225771.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:32.090Z,1513225772.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:32.105Z,1513225772.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:32.484Z,1513225772.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:32.499Z,1513225772.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:32.885Z,1513225772.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:32.900Z,1513225772.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:33.298Z,1513225773.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:33.312Z,1513225773.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:33.693Z,1513225773.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:33.708Z,1513225773.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:34.090Z,1513225774.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:34.106Z,1513225774.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:34.497Z,1513225774.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:34.656Z,1513225774.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:34.868Z,1513225774.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:34.911Z,1513225774.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:35.277Z,1513225775.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:35.347Z,1513225775.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:35.677Z,1513225775.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:35.756Z,1513225775.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:36.072Z,1513225776.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:36.131Z,1513225776.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:36.475Z,1513225776.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:36.510Z,1513225776.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:36.886Z,1513225776.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:36.913Z,1513225776.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:37.300Z,1513225777.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:37.315Z,1513225777.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:37.702Z,1513225777.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:37.723Z,1513225777.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:38.073Z,1513225778.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:38.112Z,1513225778.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:38.474Z,1513225778.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:38.501Z,1513225778.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:38.892Z,1513225778.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:38.915Z,1513225778.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:39.313Z,1513225779.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:39.327Z,1513225779.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:39.687Z,1513225779.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:39.702Z,1513225779.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:40.101Z,1513225780.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:40.127Z,1513225780.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:40.492Z,1513225780.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:40.520Z,1513225780.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:40.880Z,1513225780.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:40.898Z,1513225780.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:41.284Z,1513225781.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:41.310Z,1513225781.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:41.691Z,1513225781.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:41.752Z,1513225781.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:42.087Z,1513225782.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:42.102Z,1513225782.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:42.511Z,1513225782.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:42.539Z,1513225782.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:42.901Z,1513225782.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:42.933Z,1513225782.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:43.295Z,1513225783.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:43.311Z,1513225783.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:46.813Z,1513225786.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:46.864Z,1513225786.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:46.959Z,1513225786.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:46.986Z,1513225786.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:47.348Z,1513225787.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:47.363Z,1513225787.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:47.749Z,1513225787.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:47.764Z,1513225787.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:48.149Z,1513225788.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:48.164Z,1513225788.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:48.548Z,1513225788.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:48.567Z,1513225788.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:48.953Z,1513225788.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:48.997Z,1513225788.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:49.351Z,1513225789.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:49.366Z,1513225789.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:49.748Z,1513225789.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:49.772Z,1513225789.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:50.147Z,1513225790.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:50.162Z,1513225790.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:50.536Z,1513225790.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:50.559Z,1513225790.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:50.954Z,1513225790.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:50.969Z,1513225790.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:51.340Z,1513225791.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:51.371Z,1513225791.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:51.745Z,1513225791.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:51.781Z,1513225791.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:52.151Z,1513225792.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:52.170Z,1513225792.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:52.550Z,1513225792.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:52.564Z,1513225792.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:52.948Z,1513225792.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:52.963Z,1513225792.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:53.346Z,1513225793.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:53.364Z,1513225793.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:53.746Z,1513225793.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:53.761Z,1513225793.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:54.147Z,1513225794.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:54.163Z,1513225794.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:54.542Z,1513225794.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:54.557Z,1513225794.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:54.965Z,1513225794.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:54.997Z,1513225794.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:55.350Z,1513225795.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:55.365Z,1513225795.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:55.750Z,1513225795.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:55.764Z,1513225795.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:56.148Z,1513225796.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:56.163Z,1513225796.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:56.547Z,1513225796.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:56.564Z,1513225796.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:56.999Z,1513225796.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:57.120Z,1513225797.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:57.335Z,1513225797.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:57.367Z,1513225797.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:57.759Z,1513225797.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:57.779Z,1513225797.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:58.159Z,1513225798.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:58.179Z,1513225798.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:58.546Z,1513225798.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:58.627Z,1513225798.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:58.932Z,1513225798.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:58.977Z,1513225798.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:59.344Z,1513225799.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:59.367Z,1513225799.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:29:59.748Z,1513225799.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:29:59.796Z,1513225799.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:00.146Z,1513225800.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:00.161Z,1513225800.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:00.544Z,1513225800.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:00.588Z,1513225800.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:00.966Z,1513225800.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:00.995Z,1513225800.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:01.354Z,1513225801.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:01.369Z,1513225801.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:01.764Z,1513225801.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:01.784Z,1513225801.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:02.139Z,1513225802.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:02.165Z,1513225802.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:02.530Z,1513225802.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:02.553Z,1513225802.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:02.936Z,1513225802.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:02.966Z,1513225802.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:03.335Z,1513225803.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:03.366Z,1513225803.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:03.758Z,1513225803.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:03.779Z,1513225803.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:04.158Z,1513225804.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:04.172Z,1513225804.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:04.571Z,1513225804.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:04.596Z,1513225804.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:04.938Z,1513225804.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:04.967Z,1513225804.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:05.342Z,1513225805.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:05.359Z,1513225805.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:05.742Z,1513225805.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:05.766Z,1513225805.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:06.142Z,1513225806.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:06.171Z,1513225806.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:06.548Z,1513225806.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:06.562Z,1513225806.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:06.962Z,1513225806.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:06.977Z,1513225806.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:07.355Z,1513225807.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:07.383Z,1513225807.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:07.761Z,1513225807.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:07.783Z,1513225807.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:08.136Z,1513225808.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:08.172Z,1513225808.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:08.533Z,1513225808.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:08.567Z,1513225808.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:08.936Z,1513225808.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:08.995Z,1513225808.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:09.338Z,1513225809.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:09.365Z,1513225809.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:09.751Z,1513225809.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:09.778Z,1513225809.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:10.150Z,1513225810.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:10.183Z,1513225810.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:10.554Z,1513225810.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:10.587Z,1513225810.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:10.939Z,1513225810.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:11.015Z,1513225811.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:11.346Z,1513225811.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:11.360Z,1513225811.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:11.742Z,1513225811.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:11.757Z,1513225811.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:12.143Z,1513225812.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:12.163Z,1513225812.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:12.540Z,1513225812.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:12.556Z,1513225812.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:12.954Z,1513225812.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:12.985Z,1513225812.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:13.350Z,1513225813.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:13.370Z,1513225813.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:13.759Z,1513225813.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:13.779Z,1513225813.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.147Z,1513225814.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:14.175Z,1513225814.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.540Z,1513225814.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:14.564Z,1513225814.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.953Z,1513225814.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:14.968Z,1513225814.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.968Z,1513225814.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2017-12-14T04:30:14.969Z,1513225814.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:30:14.970Z,1513225814.970 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.970Z,1513225814.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2017-12-14T04:30:14.971Z,1513225814.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:30:14.972Z,1513225814.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:14.973Z,1513225814.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2017-12-14T04:30:14.973Z,1513225814.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:30:15.014Z,1513225815.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:30:15.014Z,1513225815.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:30:15.015Z,1513225815.015 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:30:15.335Z,1513225815.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:15.386Z,1513225815.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:30:15.386Z,1513225815.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2017-12-14T04:30:15.387Z,1513225815.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:30:15.387Z,1513225815.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2017-12-14T04:30:15.387Z,1513225815.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:30:15.387Z,1513225815.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2017-12-14T04:30:15.754Z,1513225815.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:15.768Z,1513225815.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:30:15.768Z,1513225815.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:30:15.769Z,1513225815.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:30:15.769Z,1513225815.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:30:15.770Z,1513225815.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:30:15.770Z,1513225815.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:30:15.770Z,1513225815.770 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:30:15.771Z,1513225815.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:30:15.771Z,1513225815.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:30:16.162Z,1513225816.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:16.177Z,1513225816.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:16.562Z,1513225816.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:16.576Z,1513225816.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:16.935Z,1513225816.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:16.971Z,1513225816.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:17.335Z,1513225817.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:17.391Z,1513225817.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:17.742Z,1513225817.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:17.774Z,1513225817.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:18.144Z,1513225818.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:18.179Z,1513225818.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:18.545Z,1513225818.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:18.559Z,1513225818.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:18.959Z,1513225818.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:18.989Z,1513225818.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:19.354Z,1513225819.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:19.386Z,1513225819.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:19.757Z,1513225819.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:19.788Z,1513225819.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:20.144Z,1513225820.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:20.162Z,1513225820.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:20.560Z,1513225820.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:20.591Z,1513225820.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:20.946Z,1513225820.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:21.013Z,1513225821.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:21.346Z,1513225821.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:21.414Z,1513225821.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:21.753Z,1513225821.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:21.776Z,1513225821.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:22.153Z,1513225822.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:22.168Z,1513225822.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:22.555Z,1513225822.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:22.607Z,1513225822.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:22.955Z,1513225822.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:22.969Z,1513225822.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:23.340Z,1513225823.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:23.394Z,1513225823.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:23.743Z,1513225823.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:23.760Z,1513225823.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:24.136Z,1513225824.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:24.162Z,1513225824.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:24.534Z,1513225824.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:24.559Z,1513225824.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:24.959Z,1513225824.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:24.975Z,1513225824.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:25.371Z,1513225825.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:25.391Z,1513225825.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:25.760Z,1513225825.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:25.779Z,1513225825.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:26.132Z,1513225826.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:26.147Z,1513225826.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:26.535Z,1513225826.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:26.575Z,1513225826.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:26.982Z,1513225826.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:27.092Z,1513225827.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:27.351Z,1513225827.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:27.365Z,1513225827.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:27.758Z,1513225827.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:27.788Z,1513225827.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:28.154Z,1513225828.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:28.168Z,1513225828.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:28.545Z,1513225828.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:28.567Z,1513225828.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:28.950Z,1513225828.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:28.965Z,1513225828.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:29.353Z,1513225829.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:29.368Z,1513225829.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:29.747Z,1513225829.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:29.762Z,1513225829.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:30.143Z,1513225830.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:30.171Z,1513225830.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:30.542Z,1513225830.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:30.563Z,1513225830.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:30.953Z,1513225830.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:30.968Z,1513225830.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:31.352Z,1513225831.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:31.367Z,1513225831.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:31.754Z,1513225831.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:31.804Z,1513225831.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:32.149Z,1513225832.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:32.163Z,1513225832.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:32.550Z,1513225832.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:32.564Z,1513225832.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:32.943Z,1513225832.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:32.960Z,1513225832.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:33.351Z,1513225833.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:33.409Z,1513225833.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:33.752Z,1513225833.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:33.770Z,1513225833.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:34.152Z,1513225834.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:34.166Z,1513225834.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:34.554Z,1513225834.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:34.568Z,1513225834.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:35.034Z,1513225835.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:35.055Z,1513225835.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:35.343Z,1513225835.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:35.359Z,1513225835.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:35.744Z,1513225835.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:35.758Z,1513225835.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:36.148Z,1513225836.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:36.167Z,1513225836.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:36.579Z,1513225836.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:36.644Z,1513225836.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:36.954Z,1513225836.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:36.968Z,1513225836.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:37.354Z,1513225837.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:37.368Z,1513225837.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:37.752Z,1513225837.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:37.775Z,1513225837.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:38.141Z,1513225838.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:38.156Z,1513225838.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:38.547Z,1513225838.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:38.567Z,1513225838.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:38.949Z,1513225838.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:38.963Z,1513225838.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:39.345Z,1513225839.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:39.359Z,1513225839.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:39.791Z,1513225839.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:39.819Z,1513225839.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:40.157Z,1513225840.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:40.179Z,1513225840.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:40.262Z,1513225840.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:40.557Z,1513225840.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:40.573Z,1513225840.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:40.947Z,1513225840.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:40.967Z,1513225840.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:41.060Z,1513225841.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:41.342Z,1513225841.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:41.369Z,1513225841.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:41.481Z,1513225841.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:41.735Z,1513225841.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:41.776Z,1513225841.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:42.136Z,1513225842.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:42.167Z,1513225842.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:42.278Z,1513225842.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:42.538Z,1513225842.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:42.571Z,1513225842.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:43.015Z,1513225843.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:43.024Z,1513225843.024 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T04:30:43.024Z,1513225843.024 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:30:43.024Z,1513225843.024 [BPC1](ERROR): Data Fault
2017-12-14T04:30:43.074Z,1513225843.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:43.086Z,1513225843.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:43.133Z,1513225843.133 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:30:43.354Z,1513225843.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:43.385Z,1513225843.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:43.477Z,1513225843.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:46.835Z,1513225846.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:46.859Z,1513225846.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:46.958Z,1513225846.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:46.972Z,1513225846.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:47.006Z,1513225847.006 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:30:47.006Z,1513225847.006 [BPC1] No Fault, FailCount= 1
2017-12-14T04:30:47.347Z,1513225847.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:47.415Z,1513225847.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:47.746Z,1513225847.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:47.761Z,1513225847.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:48.150Z,1513225848.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:48.165Z,1513225848.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:48.546Z,1513225848.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:48.560Z,1513225848.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:48.951Z,1513225848.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:48.966Z,1513225848.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:49.364Z,1513225849.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:49.403Z,1513225849.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:49.754Z,1513225849.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:49.768Z,1513225849.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:50.149Z,1513225850.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:50.164Z,1513225850.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:50.550Z,1513225850.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:50.564Z,1513225850.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:50.946Z,1513225850.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:50.961Z,1513225850.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:51.352Z,1513225851.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:51.368Z,1513225851.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:51.755Z,1513225851.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:51.775Z,1513225851.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:52.155Z,1513225852.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:52.171Z,1513225852.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:52.603Z,1513225852.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:52.654Z,1513225852.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:52.947Z,1513225852.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:52.967Z,1513225852.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:53.343Z,1513225853.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:53.373Z,1513225853.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:53.743Z,1513225853.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:53.775Z,1513225853.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:54.137Z,1513225854.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:54.173Z,1513225854.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:54.266Z,1513225854.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:54.539Z,1513225854.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:54.579Z,1513225854.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:54.957Z,1513225854.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:54.982Z,1513225854.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:55.063Z,1513225855.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:55.353Z,1513225855.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:55.368Z,1513225855.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:55.473Z,1513225855.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:55.789Z,1513225855.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:55.847Z,1513225855.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:56.146Z,1513225856.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:56.160Z,1513225856.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:56.269Z,1513225856.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:56.543Z,1513225856.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:56.559Z,1513225856.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:56.944Z,1513225856.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:56.963Z,1513225856.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:57.065Z,1513225857.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:57.345Z,1513225857.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:57.359Z,1513225857.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:57.469Z,1513225857.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:57.754Z,1513225857.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:57.775Z,1513225857.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:58.165Z,1513225858.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:58.180Z,1513225858.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:58.558Z,1513225858.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:58.573Z,1513225858.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:58.967Z,1513225858.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:58.990Z,1513225858.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:59.351Z,1513225859.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:59.389Z,1513225859.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:30:59.743Z,1513225859.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:30:59.758Z,1513225859.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:00.140Z,1513225860.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:00.155Z,1513225860.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:00.539Z,1513225860.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:00.563Z,1513225860.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:00.957Z,1513225860.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:00.990Z,1513225860.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:01.350Z,1513225861.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:01.364Z,1513225861.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:01.757Z,1513225861.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:01.787Z,1513225861.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:02.169Z,1513225862.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:02.191Z,1513225862.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:02.543Z,1513225862.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:02.558Z,1513225862.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:02.943Z,1513225862.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:02.963Z,1513225862.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:03.342Z,1513225863.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:03.364Z,1513225863.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:03.755Z,1513225863.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:03.775Z,1513225863.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:04.162Z,1513225864.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:04.177Z,1513225864.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:04.561Z,1513225864.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:04.583Z,1513225864.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:04.955Z,1513225864.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:04.979Z,1513225864.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:05.377Z,1513225865.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:05.425Z,1513225865.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:05.735Z,1513225865.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:05.771Z,1513225865.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:06.140Z,1513225866.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:06.167Z,1513225866.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:06.536Z,1513225866.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:06.571Z,1513225866.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:06.960Z,1513225866.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:06.983Z,1513225866.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:07.370Z,1513225867.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:07.391Z,1513225867.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:07.757Z,1513225867.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:07.807Z,1513225867.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:08.143Z,1513225868.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:08.189Z,1513225868.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:08.290Z,1513225868.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:08.554Z,1513225868.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:08.594Z,1513225868.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:08.961Z,1513225868.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:08.976Z,1513225868.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:09.085Z,1513225869.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:09.335Z,1513225869.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:09.383Z,1513225869.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:09.751Z,1513225869.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:09.766Z,1513225869.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:10.127Z,1513225870.127 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T04:31:10.127Z,1513225870.127 [NAL9602] Data Fault, FailCount= 2
2017-12-14T04:31:10.127Z,1513225870.127 [NAL9602](ERROR): Data Fault
2017-12-14T04:31:10.144Z,1513225870.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:10.198Z,1513225870.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:10.224Z,1513225870.224 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T04:31:10.528Z,1513225870.528 [NAL9602](INFO): Powering down
2017-12-14T04:31:10.546Z,1513225870.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:10.560Z,1513225870.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:10.944Z,1513225870.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:10.958Z,1513225870.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:11.343Z,1513225871.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:11.357Z,1513225871.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:11.382Z,1513225871.382 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T04:31:11.382Z,1513225871.382 [NAL9602] No Fault, FailCount= 2
2017-12-14T04:31:11.791Z,1513225871.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:11.805Z,1513225871.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:12.142Z,1513225872.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:12.158Z,1513225872.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:12.541Z,1513225872.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:12.556Z,1513225872.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:12.944Z,1513225872.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:12.958Z,1513225872.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:13.344Z,1513225873.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:13.358Z,1513225873.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:13.744Z,1513225873.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:13.758Z,1513225873.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:14.143Z,1513225874.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:14.158Z,1513225874.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:14.536Z,1513225874.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:14.551Z,1513225874.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:14.972Z,1513225874.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:15.012Z,1513225875.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:15.334Z,1513225875.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:15.371Z,1513225875.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:15.729Z,1513225875.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:15.744Z,1513225875.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:16.136Z,1513225876.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:16.171Z,1513225876.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:16.532Z,1513225876.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:16.547Z,1513225876.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:16.936Z,1513225876.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:16.985Z,1513225876.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:17.344Z,1513225877.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:17.367Z,1513225877.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:17.745Z,1513225877.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:17.760Z,1513225877.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:18.179Z,1513225878.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:18.255Z,1513225878.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:18.559Z,1513225878.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:18.604Z,1513225878.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:18.944Z,1513225878.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:18.984Z,1513225878.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:19.336Z,1513225879.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:19.374Z,1513225879.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:19.735Z,1513225879.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:19.772Z,1513225879.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:20.136Z,1513225880.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:20.175Z,1513225880.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:20.536Z,1513225880.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:20.585Z,1513225880.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:20.966Z,1513225880.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:20.990Z,1513225880.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:21.336Z,1513225881.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:21.394Z,1513225881.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:21.736Z,1513225881.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:21.772Z,1513225881.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:22.136Z,1513225882.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:22.180Z,1513225882.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:22.282Z,1513225882.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:22.537Z,1513225882.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:22.609Z,1513225882.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:22.936Z,1513225882.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:22.972Z,1513225882.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:23.079Z,1513225883.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:23.344Z,1513225883.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:23.363Z,1513225883.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:23.494Z,1513225883.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:23.742Z,1513225883.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:23.757Z,1513225883.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:24.164Z,1513225884.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:24.179Z,1513225884.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:24.290Z,1513225884.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:24.538Z,1513225884.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:24.583Z,1513225884.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:24.947Z,1513225884.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:24.969Z,1513225884.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:25.086Z,1513225885.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:25.361Z,1513225885.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:25.376Z,1513225885.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:25.489Z,1513225885.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:25.758Z,1513225885.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:25.790Z,1513225885.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:26.135Z,1513225886.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:26.166Z,1513225886.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:26.557Z,1513225886.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:26.594Z,1513225886.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:26.947Z,1513225886.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:26.998Z,1513225886.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:27.351Z,1513225887.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:27.405Z,1513225887.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:27.741Z,1513225887.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:27.757Z,1513225887.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:28.169Z,1513225888.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:28.215Z,1513225888.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:28.567Z,1513225888.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:28.592Z,1513225888.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:28.941Z,1513225888.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:28.984Z,1513225888.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:29.341Z,1513225889.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:29.360Z,1513225889.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:29.757Z,1513225889.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:29.803Z,1513225889.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:30.140Z,1513225890.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:30.279Z,1513225890.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:30.537Z,1513225890.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:30.582Z,1513225890.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:30.937Z,1513225890.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:30.980Z,1513225890.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:31.337Z,1513225891.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:31.435Z,1513225891.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:31.737Z,1513225891.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:31.784Z,1513225891.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:32.138Z,1513225892.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:32.206Z,1513225892.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:32.545Z,1513225892.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:32.592Z,1513225892.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:32.944Z,1513225892.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:32.965Z,1513225892.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:33.340Z,1513225893.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:33.355Z,1513225893.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:33.736Z,1513225893.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:33.779Z,1513225893.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:34.136Z,1513225894.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:34.159Z,1513225894.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:34.549Z,1513225894.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:34.603Z,1513225894.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:34.937Z,1513225894.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:34.980Z,1513225894.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:35.358Z,1513225895.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:35.401Z,1513225895.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:35.736Z,1513225895.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:35.773Z,1513225895.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:36.136Z,1513225896.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:36.176Z,1513225896.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:36.294Z,1513225896.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:36.536Z,1513225896.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:36.577Z,1513225896.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:36.936Z,1513225896.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:36.979Z,1513225896.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:37.090Z,1513225897.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:37.357Z,1513225897.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:37.407Z,1513225897.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:37.494Z,1513225897.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:37.737Z,1513225897.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:37.802Z,1513225897.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:38.136Z,1513225898.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:38.176Z,1513225898.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:38.290Z,1513225898.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:38.540Z,1513225898.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:38.575Z,1513225898.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:38.936Z,1513225898.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:39.017Z,1513225899.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:39.086Z,1513225899.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:39.334Z,1513225899.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:39.370Z,1513225899.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:39.489Z,1513225899.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:39.732Z,1513225899.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:39.747Z,1513225899.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:40.135Z,1513225900.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:40.150Z,1513225900.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:40.538Z,1513225900.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:40.592Z,1513225900.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:40.936Z,1513225900.936 [NAL9602](INFO): Powering up NAL9602
2017-12-14T04:31:40.954Z,1513225900.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:40.982Z,1513225900.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:41.335Z,1513225901.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:41.355Z,1513225901.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:41.742Z,1513225901.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:41.783Z,1513225901.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:42.142Z,1513225902.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:42.183Z,1513225902.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:42.543Z,1513225902.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:42.557Z,1513225902.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:42.943Z,1513225902.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:42.958Z,1513225902.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:43.342Z,1513225903.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:43.357Z,1513225903.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:43.745Z,1513225903.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:43.760Z,1513225903.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:47.385Z,1513225907.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:47.400Z,1513225907.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:47.563Z,1513225907.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:47.619Z,1513225907.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:47.855Z,1513225907.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:47.875Z,1513225907.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:48.259Z,1513225908.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:48.275Z,1513225908.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:48.656Z,1513225908.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:48.672Z,1513225908.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:49.106Z,1513225909.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:49.131Z,1513225909.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:49.458Z,1513225909.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:49.483Z,1513225909.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:49.844Z,1513225909.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:49.871Z,1513225909.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:50.246Z,1513225910.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:50.271Z,1513225910.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:50.677Z,1513225910.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:50.720Z,1513225910.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:51.092Z,1513225911.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:51.133Z,1513225911.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:51.473Z,1513225911.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:51.488Z,1513225911.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:51.830Z,1513225911.830 [NAL9602](INFO): NAL9602 initialized
2017-12-14T04:31:51.848Z,1513225911.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:51.884Z,1513225911.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:52.251Z,1513225912.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:52.278Z,1513225912.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:52.684Z,1513225912.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:52.835Z,1513225912.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:53.065Z,1513225913.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:53.092Z,1513225913.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:53.479Z,1513225913.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:53.494Z,1513225913.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:53.907Z,1513225913.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:53.966Z,1513225913.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:54.255Z,1513225914.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:54.290Z,1513225914.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:54.652Z,1513225914.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:54.752Z,1513225914.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:55.060Z,1513225915.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:55.075Z,1513225915.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:55.466Z,1513225915.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:55.509Z,1513225915.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:55.869Z,1513225915.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:55.883Z,1513225915.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:56.270Z,1513225916.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:56.291Z,1513225916.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:56.642Z,1513225916.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:56.687Z,1513225916.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:57.086Z,1513225917.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:57.180Z,1513225917.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:57.456Z,1513225917.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:57.475Z,1513225917.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:57.857Z,1513225917.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:57.872Z,1513225917.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:58.261Z,1513225918.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:58.276Z,1513225918.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:58.662Z,1513225918.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:58.738Z,1513225918.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:59.070Z,1513225919.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:59.085Z,1513225919.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:59.459Z,1513225919.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:59.480Z,1513225919.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:31:59.847Z,1513225919.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:31:59.872Z,1513225919.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:00.260Z,1513225920.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:00.279Z,1513225920.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:00.655Z,1513225920.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:00.677Z,1513225920.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:01.052Z,1513225921.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:01.094Z,1513225921.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:01.466Z,1513225921.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:01.492Z,1513225921.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:01.865Z,1513225921.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:01.890Z,1513225921.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:02.265Z,1513225922.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:02.295Z,1513225922.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:02.650Z,1513225922.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:02.665Z,1513225922.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:03.114Z,1513225923.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:03.188Z,1513225923.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:03.468Z,1513225923.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:03.512Z,1513225923.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:03.856Z,1513225923.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:03.871Z,1513225923.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:04.265Z,1513225924.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:04.302Z,1513225924.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:04.669Z,1513225924.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:04.700Z,1513225924.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:05.112Z,1513225925.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:05.131Z,1513225925.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:05.459Z,1513225925.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:05.473Z,1513225925.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:05.854Z,1513225925.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:05.877Z,1513225925.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:06.259Z,1513225926.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:06.274Z,1513225926.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:06.712Z,1513225926.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:06.813Z,1513225926.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:07.047Z,1513225927.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:07.075Z,1513225927.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:07.470Z,1513225927.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:07.491Z,1513225927.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:07.870Z,1513225927.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:07.885Z,1513225927.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:08.271Z,1513225928.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:08.291Z,1513225928.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:08.659Z,1513225928.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:08.742Z,1513225928.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:09.047Z,1513225929.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:09.061Z,1513225929.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:09.456Z,1513225929.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:09.491Z,1513225929.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:09.855Z,1513225929.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:09.875Z,1513225929.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:10.269Z,1513225930.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:10.297Z,1513225930.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:10.666Z,1513225930.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:10.751Z,1513225930.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:11.066Z,1513225931.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:11.082Z,1513225931.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:11.455Z,1513225931.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:11.478Z,1513225931.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:11.863Z,1513225931.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:11.883Z,1513225931.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:12.263Z,1513225932.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:12.278Z,1513225932.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:12.663Z,1513225932.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:12.751Z,1513225932.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:13.064Z,1513225933.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:13.122Z,1513225933.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:13.478Z,1513225933.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:13.499Z,1513225933.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:13.874Z,1513225933.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:13.889Z,1513225933.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:14.267Z,1513225934.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:14.296Z,1513225934.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:14.650Z,1513225934.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:14.664Z,1513225934.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:15.059Z,1513225935.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:15.127Z,1513225935.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:15.456Z,1513225935.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:15.522Z,1513225935.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:15.853Z,1513225935.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:15.868Z,1513225935.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:16.271Z,1513225936.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:16.355Z,1513225936.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:16.673Z,1513225936.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:16.700Z,1513225936.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:17.116Z,1513225937.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:17.164Z,1513225937.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:17.459Z,1513225937.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:17.479Z,1513225937.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:17.857Z,1513225937.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:17.873Z,1513225937.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:18.250Z,1513225938.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:18.283Z,1513225938.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:18.660Z,1513225938.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:18.676Z,1513225938.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:19.109Z,1513225939.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:19.147Z,1513225939.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:19.482Z,1513225939.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:19.520Z,1513225939.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:19.861Z,1513225939.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:19.890Z,1513225939.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:20.271Z,1513225940.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:20.288Z,1513225940.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:20.647Z,1513225940.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:20.750Z,1513225940.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:21.049Z,1513225941.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:21.063Z,1513225941.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:21.453Z,1513225941.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:21.468Z,1513225941.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:21.856Z,1513225941.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:21.871Z,1513225941.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:22.265Z,1513225942.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:22.294Z,1513225942.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:22.707Z,1513225942.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:22.794Z,1513225942.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:23.066Z,1513225943.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:23.089Z,1513225943.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:23.451Z,1513225943.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:23.477Z,1513225943.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:23.848Z,1513225943.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:23.875Z,1513225943.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:24.251Z,1513225944.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:24.284Z,1513225944.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:24.651Z,1513225944.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:24.746Z,1513225944.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:25.047Z,1513225945.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:25.061Z,1513225945.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:25.461Z,1513225945.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:25.528Z,1513225945.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:25.861Z,1513225945.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:25.892Z,1513225945.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:26.265Z,1513225946.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:26.298Z,1513225946.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:26.648Z,1513225946.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:26.668Z,1513225946.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:27.054Z,1513225947.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:27.068Z,1513225947.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:27.458Z,1513225947.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:27.472Z,1513225947.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:27.857Z,1513225947.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:27.872Z,1513225947.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:28.269Z,1513225948.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:28.301Z,1513225948.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:28.665Z,1513225948.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:28.679Z,1513225948.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:29.085Z,1513225949.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:29.122Z,1513225949.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:29.456Z,1513225949.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:29.471Z,1513225949.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:29.853Z,1513225949.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:29.867Z,1513225949.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:30.257Z,1513225950.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:30.272Z,1513225950.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:30.653Z,1513225950.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:30.668Z,1513225950.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:31.114Z,1513225951.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:31.144Z,1513225951.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:31.472Z,1513225951.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:31.509Z,1513225951.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:31.863Z,1513225951.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:31.878Z,1513225951.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:32.294Z,1513225952.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:32.327Z,1513225952.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:32.667Z,1513225952.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:32.682Z,1513225952.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:33.109Z,1513225953.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:33.140Z,1513225953.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:33.448Z,1513225953.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:33.475Z,1513225953.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:33.859Z,1513225953.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:33.874Z,1513225953.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:34.266Z,1513225954.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:34.280Z,1513225954.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:34.676Z,1513225954.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:34.775Z,1513225954.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:35.074Z,1513225955.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:35.089Z,1513225955.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:35.474Z,1513225955.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:35.514Z,1513225955.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:35.847Z,1513225955.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:35.885Z,1513225955.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:36.251Z,1513225956.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:36.282Z,1513225956.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:36.651Z,1513225956.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:36.736Z,1513225956.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:37.057Z,1513225957.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:37.131Z,1513225957.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:37.462Z,1513225957.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:37.526Z,1513225957.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:37.866Z,1513225957.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:37.881Z,1513225957.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:38.264Z,1513225958.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:38.306Z,1513225958.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:38.663Z,1513225958.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:38.747Z,1513225958.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:39.047Z,1513225959.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:39.101Z,1513225959.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:39.452Z,1513225959.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:39.483Z,1513225959.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:39.852Z,1513225959.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:39.879Z,1513225959.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:40.257Z,1513225960.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:40.289Z,1513225960.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:40.726Z,1513225960.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:40.779Z,1513225960.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:41.068Z,1513225961.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:41.087Z,1513225961.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:41.451Z,1513225961.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:41.487Z,1513225961.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:41.852Z,1513225961.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:41.878Z,1513225961.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:42.252Z,1513225962.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:42.283Z,1513225962.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:42.658Z,1513225962.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:42.674Z,1513225962.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:43.047Z,1513225963.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:43.079Z,1513225963.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:43.082Z,1513225963.082 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:32:43.082Z,1513225963.082 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:32:43.082Z,1513225963.082 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:32:43.082Z,1513225963.082 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:32:43.469Z,1513225963.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:43.484Z,1513225963.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:43.487Z,1513225963.487 [Default:CheckIn:D] Stopped
2017-12-14T04:32:43.487Z,1513225963.487 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:32:43.870Z,1513225963.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:43.885Z,1513225963.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:43.888Z,1513225963.888 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 239.468294 min 
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn:E] Stopped
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn] Stopped
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn](INFO): Running loop #24
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn] Running Loop=24
2017-12-14T04:32:43.889Z,1513225963.889 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:32:43.890Z,1513225963.890 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:32:47.431Z,1513225967.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:47.472Z,1513225967.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:47.576Z,1513225967.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:47.617Z,1513225967.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:47.931Z,1513225967.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:47.947Z,1513225967.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:48.354Z,1513225968.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:48.407Z,1513225968.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:48.772Z,1513225968.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:48.800Z,1513225968.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:49.132Z,1513225969.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:49.148Z,1513225969.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:49.538Z,1513225969.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:49.553Z,1513225969.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:49.938Z,1513225969.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:49.953Z,1513225969.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:50.334Z,1513225970.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:50.349Z,1513225970.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:50.787Z,1513225970.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:50.832Z,1513225970.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:51.128Z,1513225971.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:51.155Z,1513225971.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:51.546Z,1513225971.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:51.568Z,1513225971.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:51.929Z,1513225971.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:51.944Z,1513225971.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:52.338Z,1513225972.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:52.355Z,1513225972.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:52.782Z,1513225972.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:52.797Z,1513225972.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:53.142Z,1513225973.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:53.171Z,1513225973.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:53.532Z,1513225973.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:53.548Z,1513225973.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:53.927Z,1513225973.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:53.948Z,1513225973.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:54.333Z,1513225974.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:54.349Z,1513225974.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:54.790Z,1513225974.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:54.824Z,1513225974.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:55.133Z,1513225975.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:55.148Z,1513225975.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:55.534Z,1513225975.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:55.550Z,1513225975.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:55.946Z,1513225975.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:55.978Z,1513225975.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:56.331Z,1513225976.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:56.347Z,1513225976.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:56.744Z,1513225976.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:56.843Z,1513225976.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:57.143Z,1513225977.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:57.159Z,1513225977.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:57.528Z,1513225977.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:57.550Z,1513225977.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:57.927Z,1513225977.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:57.948Z,1513225977.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:58.338Z,1513225978.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:58.358Z,1513225978.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:58.742Z,1513225978.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:58.763Z,1513225978.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:59.144Z,1513225979.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:59.215Z,1513225979.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:59.520Z,1513225979.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:59.544Z,1513225979.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:32:59.920Z,1513225979.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:32:59.935Z,1513225979.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:00.331Z,1513225980.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:00.399Z,1513225980.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:00.727Z,1513225980.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:00.762Z,1513225980.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:01.176Z,1513225981.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:01.235Z,1513225981.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:01.543Z,1513225981.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:01.574Z,1513225981.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:01.942Z,1513225981.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:01.975Z,1513225981.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:02.333Z,1513225982.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:02.350Z,1513225982.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:02.765Z,1513225982.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:02.784Z,1513225982.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:03.137Z,1513225983.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:03.154Z,1513225983.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:03.532Z,1513225983.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:03.548Z,1513225983.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:03.930Z,1513225983.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:03.944Z,1513225983.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:04.355Z,1513225984.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:04.385Z,1513225984.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:04.778Z,1513225984.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:04.808Z,1513225984.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:05.141Z,1513225985.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:05.158Z,1513225985.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:05.531Z,1513225985.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:05.552Z,1513225985.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:05.928Z,1513225985.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:05.943Z,1513225985.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:06.330Z,1513225986.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:06.344Z,1513225986.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:06.780Z,1513225986.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:06.804Z,1513225986.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:07.123Z,1513225987.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:07.151Z,1513225987.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:07.559Z,1513225987.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:07.597Z,1513225987.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:07.942Z,1513225987.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:07.963Z,1513225987.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:08.342Z,1513225988.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:08.357Z,1513225988.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:08.760Z,1513225988.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:08.798Z,1513225988.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:09.126Z,1513225989.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:09.149Z,1513225989.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:09.526Z,1513225989.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:09.579Z,1513225989.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:09.929Z,1513225989.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:09.943Z,1513225989.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:10.342Z,1513225990.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:10.375Z,1513225990.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:10.794Z,1513225990.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:10.837Z,1513225990.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:11.137Z,1513225991.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:11.152Z,1513225991.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:11.523Z,1513225991.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:11.551Z,1513225991.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:11.930Z,1513225991.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:11.946Z,1513225991.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:12.333Z,1513225992.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:12.348Z,1513225992.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:12.733Z,1513225992.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:12.749Z,1513225992.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:13.123Z,1513225993.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:13.158Z,1513225993.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:13.544Z,1513225993.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:13.559Z,1513225993.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:13.947Z,1513225993.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:13.962Z,1513225993.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:14.329Z,1513225994.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:14.356Z,1513225994.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:14.716Z,1513225994.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:14.731Z,1513225994.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.123Z,1513225995.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:15.151Z,1513225995.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.528Z,1513225995.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:15.562Z,1513225995.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.928Z,1513225995.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:15.942Z,1513225995.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.942Z,1513225995.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2017-12-14T04:33:15.942Z,1513225995.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:33:15.944Z,1513225995.944 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.944Z,1513225995.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2017-12-14T04:33:15.944Z,1513225995.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:33:15.977Z,1513225995.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:15.978Z,1513225995.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2017-12-14T04:33:15.978Z,1513225995.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:33:16.012Z,1513225996.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:33:16.012Z,1513225996.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:33:16.013Z,1513225996.013 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:33:16.343Z,1513225996.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:16.381Z,1513225996.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:33:16.381Z,1513225996.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2017-12-14T04:33:16.382Z,1513225996.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:33:16.382Z,1513225996.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2017-12-14T04:33:16.382Z,1513225996.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:33:16.382Z,1513225996.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2017-12-14T04:33:16.774Z,1513225996.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:16.794Z,1513225996.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:33:16.794Z,1513225996.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:33:16.794Z,1513225996.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:33:16.795Z,1513225996.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:33:16.795Z,1513225996.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:33:16.795Z,1513225996.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:33:16.796Z,1513225996.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:33:16.796Z,1513225996.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:33:16.796Z,1513225996.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:33:17.151Z,1513225997.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:17.188Z,1513225997.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:17.528Z,1513225997.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:17.548Z,1513225997.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:17.935Z,1513225997.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:17.950Z,1513225997.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:18.334Z,1513225998.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:18.350Z,1513225998.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:18.773Z,1513225998.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:18.796Z,1513225998.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:19.123Z,1513225999.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:19.144Z,1513225999.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:19.537Z,1513225999.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:19.552Z,1513225999.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:19.938Z,1513225999.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:19.953Z,1513225999.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:20.369Z,1513226000.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:20.392Z,1513226000.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:20.773Z,1513226000.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:20.809Z,1513226000.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:21.119Z,1513226001.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:21.183Z,1513226001.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:21.524Z,1513226001.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:21.591Z,1513226001.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:21.919Z,1513226001.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:21.944Z,1513226001.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:22.343Z,1513226002.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:22.402Z,1513226002.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:22.783Z,1513226002.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:22.798Z,1513226002.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:23.148Z,1513226003.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:23.199Z,1513226003.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:23.519Z,1513226003.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:23.579Z,1513226003.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:23.939Z,1513226003.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:23.971Z,1513226003.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:24.327Z,1513226004.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:24.365Z,1513226004.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:24.739Z,1513226004.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:24.831Z,1513226004.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:25.125Z,1513226005.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:25.139Z,1513226005.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:25.538Z,1513226005.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:25.570Z,1513226005.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:25.938Z,1513226005.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:25.969Z,1513226005.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:26.341Z,1513226006.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:26.371Z,1513226006.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:26.746Z,1513226006.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:26.780Z,1513226006.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:27.121Z,1513226007.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:27.163Z,1513226007.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:27.524Z,1513226007.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:27.551Z,1513226007.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:27.920Z,1513226007.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:27.957Z,1513226007.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:28.343Z,1513226008.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:28.363Z,1513226008.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:28.747Z,1513226008.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:28.762Z,1513226008.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:29.150Z,1513226009.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:29.166Z,1513226009.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:29.519Z,1513226009.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:29.551Z,1513226009.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:29.927Z,1513226009.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:29.999Z,1513226009.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:30.320Z,1513226010.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:30.353Z,1513226010.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:30.772Z,1513226010.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:30.813Z,1513226010.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:31.128Z,1513226011.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:31.152Z,1513226011.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:31.546Z,1513226011.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:31.588Z,1513226011.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:31.941Z,1513226011.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:31.975Z,1513226011.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:32.341Z,1513226012.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:32.375Z,1513226012.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:32.779Z,1513226012.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:32.799Z,1513226012.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:33.153Z,1513226013.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:33.189Z,1513226013.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:33.539Z,1513226013.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:33.559Z,1513226013.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:33.934Z,1513226013.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:33.948Z,1513226013.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:34.338Z,1513226014.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:34.359Z,1513226014.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:34.774Z,1513226014.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:34.797Z,1513226014.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:35.139Z,1513226015.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:35.166Z,1513226015.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:35.532Z,1513226015.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:35.552Z,1513226015.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:35.935Z,1513226015.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:35.951Z,1513226015.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:36.320Z,1513226016.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:36.388Z,1513226016.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:36.764Z,1513226016.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:36.811Z,1513226016.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:37.135Z,1513226017.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:37.151Z,1513226017.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:37.544Z,1513226017.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:37.559Z,1513226017.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:37.939Z,1513226017.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:37.960Z,1513226017.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:38.344Z,1513226018.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:38.367Z,1513226018.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:38.781Z,1513226018.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:38.845Z,1513226018.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:39.131Z,1513226019.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:39.152Z,1513226019.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:39.564Z,1513226019.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:39.599Z,1513226019.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:39.928Z,1513226019.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:39.944Z,1513226019.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:40.341Z,1513226020.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:40.374Z,1513226020.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:40.733Z,1513226020.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:40.750Z,1513226020.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:41.135Z,1513226021.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:41.163Z,1513226021.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:41.538Z,1513226021.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:41.554Z,1513226021.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:41.930Z,1513226021.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:41.945Z,1513226021.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:42.332Z,1513226022.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:42.349Z,1513226022.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:42.756Z,1513226022.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:42.798Z,1513226022.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:43.121Z,1513226023.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:43.168Z,1513226023.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:43.541Z,1513226023.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:43.607Z,1513226023.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:43.956Z,1513226023.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:44.030Z,1513226024.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:47.425Z,1513226027.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:47.460Z,1513226027.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:47.536Z,1513226027.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:47.579Z,1513226027.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:47.921Z,1513226027.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:47.956Z,1513226027.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:48.317Z,1513226028.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:48.379Z,1513226028.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:48.770Z,1513226028.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:48.817Z,1513226028.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:49.144Z,1513226029.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:49.207Z,1513226029.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:49.529Z,1513226029.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:49.558Z,1513226029.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:49.929Z,1513226029.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:49.954Z,1513226029.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:50.321Z,1513226030.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:50.336Z,1513226030.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:50.771Z,1513226030.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:50.817Z,1513226030.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:51.119Z,1513226031.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:51.134Z,1513226031.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:51.514Z,1513226031.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:51.541Z,1513226031.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:51.920Z,1513226031.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:51.934Z,1513226031.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:52.354Z,1513226032.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:52.380Z,1513226032.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:52.760Z,1513226032.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:52.830Z,1513226032.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:53.130Z,1513226033.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:53.156Z,1513226033.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:53.512Z,1513226033.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:53.538Z,1513226033.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:53.907Z,1513226033.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:53.969Z,1513226033.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:54.307Z,1513226034.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:54.339Z,1513226034.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:54.705Z,1513226034.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:54.736Z,1513226034.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:55.123Z,1513226035.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:55.162Z,1513226035.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:55.546Z,1513226035.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:55.572Z,1513226035.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:55.930Z,1513226035.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:55.963Z,1513226035.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:56.325Z,1513226036.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:56.351Z,1513226036.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:56.713Z,1513226036.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:56.727Z,1513226036.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:57.127Z,1513226037.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:57.158Z,1513226037.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:57.519Z,1513226037.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:57.575Z,1513226037.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:57.915Z,1513226037.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:57.929Z,1513226037.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:58.326Z,1513226038.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:58.358Z,1513226038.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:58.777Z,1513226038.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:58.823Z,1513226038.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:59.129Z,1513226039.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:59.146Z,1513226039.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:59.511Z,1513226039.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:59.532Z,1513226039.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:33:59.912Z,1513226039.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:33:59.984Z,1513226039.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:00.321Z,1513226040.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:00.335Z,1513226040.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:00.767Z,1513226040.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:00.803Z,1513226040.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:01.119Z,1513226041.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:01.139Z,1513226041.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:01.529Z,1513226041.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:01.548Z,1513226041.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:01.925Z,1513226041.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:01.940Z,1513226041.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:02.338Z,1513226042.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:02.359Z,1513226042.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:02.768Z,1513226042.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:02.802Z,1513226042.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:03.111Z,1513226043.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:03.137Z,1513226043.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:03.508Z,1513226043.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:03.533Z,1513226043.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:03.908Z,1513226043.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:03.934Z,1513226043.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:04.334Z,1513226044.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:04.349Z,1513226044.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:04.770Z,1513226044.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:04.798Z,1513226044.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:05.141Z,1513226045.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:05.175Z,1513226045.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:05.512Z,1513226045.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:05.539Z,1513226045.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:05.918Z,1513226045.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:05.932Z,1513226045.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:06.317Z,1513226046.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:06.332Z,1513226046.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:06.715Z,1513226046.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:06.810Z,1513226046.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:07.111Z,1513226047.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:07.143Z,1513226047.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:07.534Z,1513226047.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:07.551Z,1513226047.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:07.933Z,1513226047.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:07.951Z,1513226047.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:08.355Z,1513226048.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:08.387Z,1513226048.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:08.718Z,1513226048.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:08.749Z,1513226048.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:09.118Z,1513226049.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:09.172Z,1513226049.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:09.518Z,1513226049.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:09.567Z,1513226049.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:09.911Z,1513226049.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:09.964Z,1513226049.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:10.318Z,1513226050.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:10.341Z,1513226050.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:10.726Z,1513226050.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:10.774Z,1513226050.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:11.129Z,1513226051.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:11.166Z,1513226051.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:11.534Z,1513226051.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:11.587Z,1513226051.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:11.906Z,1513226051.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:11.935Z,1513226051.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:12.326Z,1513226052.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:12.341Z,1513226052.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:12.776Z,1513226052.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:12.800Z,1513226052.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:13.109Z,1513226053.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:13.158Z,1513226053.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:13.536Z,1513226053.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:13.551Z,1513226053.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:13.936Z,1513226053.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:13.951Z,1513226053.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:14.335Z,1513226054.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:14.351Z,1513226054.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:14.783Z,1513226054.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:14.814Z,1513226054.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:15.107Z,1513226055.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:15.144Z,1513226055.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:15.512Z,1513226055.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:15.543Z,1513226055.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:15.912Z,1513226055.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:15.960Z,1513226055.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:16.319Z,1513226056.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:16.355Z,1513226056.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:16.765Z,1513226056.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:16.780Z,1513226056.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:17.126Z,1513226057.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:17.150Z,1513226057.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:17.520Z,1513226057.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:17.536Z,1513226057.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:17.907Z,1513226057.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:17.940Z,1513226057.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:18.308Z,1513226058.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:18.338Z,1513226058.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:18.752Z,1513226058.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:18.780Z,1513226058.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:19.109Z,1513226059.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:19.140Z,1513226059.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:19.531Z,1513226059.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:19.546Z,1513226059.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:19.934Z,1513226059.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:19.995Z,1513226059.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:20.335Z,1513226060.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:20.350Z,1513226060.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:20.717Z,1513226060.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:20.803Z,1513226060.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:21.132Z,1513226061.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:21.187Z,1513226061.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:21.520Z,1513226061.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:21.535Z,1513226061.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:21.918Z,1513226061.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:21.944Z,1513226061.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:22.326Z,1513226062.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:22.342Z,1513226062.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:22.726Z,1513226062.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:22.748Z,1513226062.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:23.134Z,1513226063.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:23.169Z,1513226063.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:23.522Z,1513226063.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:23.537Z,1513226063.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:23.923Z,1513226063.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:23.938Z,1513226063.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:24.343Z,1513226064.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:24.377Z,1513226064.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:24.714Z,1513226064.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:24.737Z,1513226064.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:25.133Z,1513226065.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:25.191Z,1513226065.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:25.529Z,1513226065.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:25.544Z,1513226065.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:25.925Z,1513226065.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:25.955Z,1513226065.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:26.330Z,1513226066.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:26.345Z,1513226066.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:26.773Z,1513226066.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:26.800Z,1513226066.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:27.107Z,1513226067.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:27.148Z,1513226067.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:27.540Z,1513226067.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:27.581Z,1513226067.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:27.917Z,1513226067.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:27.939Z,1513226067.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:28.331Z,1513226068.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:28.351Z,1513226068.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:28.786Z,1513226068.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:28.802Z,1513226068.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:29.134Z,1513226069.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:29.150Z,1513226069.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:29.516Z,1513226069.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:29.532Z,1513226069.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:29.914Z,1513226069.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:29.943Z,1513226069.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:30.321Z,1513226070.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:30.336Z,1513226070.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:30.802Z,1513226070.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:30.839Z,1513226070.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:31.129Z,1513226071.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:31.144Z,1513226071.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:31.534Z,1513226071.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:31.549Z,1513226071.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:31.932Z,1513226071.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:32.002Z,1513226072.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:32.330Z,1513226072.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:32.346Z,1513226072.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:32.785Z,1513226072.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:32.878Z,1513226072.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:33.108Z,1513226073.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:33.143Z,1513226073.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:33.509Z,1513226073.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:33.559Z,1513226073.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:33.908Z,1513226073.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:33.947Z,1513226073.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:34.332Z,1513226074.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:34.351Z,1513226074.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:34.748Z,1513226074.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:34.824Z,1513226074.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:35.132Z,1513226075.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:35.148Z,1513226075.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:35.511Z,1513226075.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:35.548Z,1513226075.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:35.912Z,1513226075.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:35.926Z,1513226075.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:36.315Z,1513226076.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:36.331Z,1513226076.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:36.704Z,1513226076.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:36.719Z,1513226076.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:37.124Z,1513226077.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:37.167Z,1513226077.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:37.521Z,1513226077.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:37.543Z,1513226077.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:37.923Z,1513226077.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:37.943Z,1513226077.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:38.325Z,1513226078.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:38.339Z,1513226078.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:38.719Z,1513226078.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:38.735Z,1513226078.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:39.127Z,1513226079.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:39.152Z,1513226079.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:39.508Z,1513226079.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:39.543Z,1513226079.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:39.911Z,1513226079.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:39.943Z,1513226079.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:40.351Z,1513226080.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:40.379Z,1513226080.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:40.755Z,1513226080.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:40.799Z,1513226080.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:41.142Z,1513226081.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:41.157Z,1513226081.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:41.508Z,1513226081.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:41.538Z,1513226081.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:41.907Z,1513226081.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:41.948Z,1513226081.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:42.311Z,1513226082.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:42.340Z,1513226082.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:42.765Z,1513226082.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:42.811Z,1513226082.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:43.112Z,1513226083.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:43.148Z,1513226083.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:43.553Z,1513226083.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:43.593Z,1513226083.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:43.923Z,1513226083.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:43.937Z,1513226083.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:44.329Z,1513226084.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:44.343Z,1513226084.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:47.871Z,1513226087.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:47.885Z,1513226087.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:47.983Z,1513226087.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:48.022Z,1513226088.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:48.350Z,1513226088.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:48.386Z,1513226088.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:48.813Z,1513226088.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:48.835Z,1513226088.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:49.150Z,1513226089.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:49.165Z,1513226089.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:49.544Z,1513226089.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:49.567Z,1513226089.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:50.021Z,1513226090.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:50.052Z,1513226090.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:50.338Z,1513226090.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:50.360Z,1513226090.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:50.744Z,1513226090.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:50.761Z,1513226090.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:51.141Z,1513226091.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:51.157Z,1513226091.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:51.552Z,1513226091.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:51.571Z,1513226091.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:51.955Z,1513226091.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:51.975Z,1513226091.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:52.355Z,1513226092.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:52.375Z,1513226092.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:52.743Z,1513226092.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:52.803Z,1513226092.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:53.150Z,1513226093.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:53.181Z,1513226093.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:53.536Z,1513226093.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:53.572Z,1513226093.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:53.936Z,1513226093.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:54.018Z,1513226094.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:54.354Z,1513226094.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:54.375Z,1513226094.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:54.803Z,1513226094.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:54.818Z,1513226094.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:55.150Z,1513226095.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:55.203Z,1513226095.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:55.532Z,1513226095.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:55.574Z,1513226095.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:55.932Z,1513226095.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:55.983Z,1513226095.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:56.343Z,1513226096.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:56.391Z,1513226096.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:56.767Z,1513226096.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:56.808Z,1513226096.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:57.142Z,1513226097.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:57.159Z,1513226097.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:57.556Z,1513226097.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:57.587Z,1513226097.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:57.950Z,1513226097.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:57.966Z,1513226097.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:58.346Z,1513226098.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:58.362Z,1513226098.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:58.768Z,1513226098.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:58.792Z,1513226098.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:59.135Z,1513226099.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:59.177Z,1513226099.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:59.598Z,1513226099.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:59.648Z,1513226099.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:34:59.924Z,1513226099.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:34:59.960Z,1513226099.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:00.354Z,1513226100.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:00.368Z,1513226100.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:00.799Z,1513226100.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:00.818Z,1513226100.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:01.155Z,1513226101.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:01.177Z,1513226101.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:01.532Z,1513226101.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:01.564Z,1513226101.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:01.935Z,1513226101.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:01.964Z,1513226101.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:02.329Z,1513226102.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:02.365Z,1513226102.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:02.800Z,1513226102.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:02.834Z,1513226102.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:03.140Z,1513226103.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:03.155Z,1513226103.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:03.554Z,1513226103.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:03.587Z,1513226103.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:03.950Z,1513226103.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:03.964Z,1513226103.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:04.347Z,1513226104.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:04.391Z,1513226104.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:04.736Z,1513226104.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:04.752Z,1513226104.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:05.143Z,1513226105.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:05.159Z,1513226105.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:05.545Z,1513226105.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:05.560Z,1513226105.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:05.963Z,1513226105.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:05.992Z,1513226105.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:06.355Z,1513226106.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:06.370Z,1513226106.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:06.753Z,1513226106.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:06.769Z,1513226106.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:07.153Z,1513226107.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:07.168Z,1513226107.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:07.540Z,1513226107.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:07.555Z,1513226107.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:07.942Z,1513226107.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:07.959Z,1513226107.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:08.346Z,1513226108.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:08.361Z,1513226108.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:08.777Z,1513226108.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:08.806Z,1513226108.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:09.143Z,1513226109.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:09.201Z,1513226109.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:09.548Z,1513226109.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:09.568Z,1513226109.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:09.955Z,1513226109.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:09.969Z,1513226109.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:10.360Z,1513226110.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:10.374Z,1513226110.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:10.773Z,1513226110.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:10.807Z,1513226110.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:11.131Z,1513226111.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:11.168Z,1513226111.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:11.532Z,1513226111.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:11.564Z,1513226111.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:11.935Z,1513226111.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:11.961Z,1513226111.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:12.396Z,1513226112.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:12.430Z,1513226112.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:12.783Z,1513226112.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:12.805Z,1513226112.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:13.153Z,1513226113.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:13.176Z,1513226113.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:13.531Z,1513226113.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:13.566Z,1513226113.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:13.931Z,1513226113.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:13.962Z,1513226113.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:14.335Z,1513226114.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:14.367Z,1513226114.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:14.781Z,1513226114.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:14.889Z,1513226114.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:15.132Z,1513226115.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:15.155Z,1513226115.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:15.547Z,1513226115.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:15.618Z,1513226115.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:15.972Z,1513226115.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:16.023Z,1513226116.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:16.350Z,1513226116.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:16.380Z,1513226116.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:16.782Z,1513226116.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:16.852Z,1513226116.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:17.133Z,1513226117.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:17.148Z,1513226117.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:17.538Z,1513226117.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:17.581Z,1513226117.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:17.928Z,1513226117.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:17.948Z,1513226117.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:18.350Z,1513226118.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:18.377Z,1513226118.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:18.779Z,1513226118.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:18.823Z,1513226118.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:19.148Z,1513226119.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:19.177Z,1513226119.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:19.537Z,1513226119.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:19.575Z,1513226119.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:19.940Z,1513226119.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:19.956Z,1513226119.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:20.332Z,1513226120.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:20.352Z,1513226120.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:20.739Z,1513226120.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:20.754Z,1513226120.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:21.137Z,1513226121.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:21.160Z,1513226121.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:21.542Z,1513226121.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:21.557Z,1513226121.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:22.006Z,1513226122.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:22.088Z,1513226122.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:22.347Z,1513226122.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:22.383Z,1513226122.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:22.785Z,1513226122.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:22.807Z,1513226122.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:23.138Z,1513226123.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:23.153Z,1513226123.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:23.546Z,1513226123.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:23.561Z,1513226123.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:23.932Z,1513226123.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:23.955Z,1513226123.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:24.346Z,1513226124.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:24.360Z,1513226124.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:24.771Z,1513226124.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:24.806Z,1513226124.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:25.155Z,1513226125.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:25.206Z,1513226125.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:25.531Z,1513226125.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:25.569Z,1513226125.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:25.942Z,1513226125.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:25.966Z,1513226125.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:26.339Z,1513226126.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:26.369Z,1513226126.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:26.771Z,1513226126.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:26.802Z,1513226126.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:27.135Z,1513226127.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:27.180Z,1513226127.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:27.555Z,1513226127.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:27.580Z,1513226127.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:27.950Z,1513226127.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:27.977Z,1513226127.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:28.348Z,1513226128.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:28.402Z,1513226128.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:28.766Z,1513226128.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:28.804Z,1513226128.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:29.131Z,1513226129.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:29.168Z,1513226129.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:29.532Z,1513226129.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:29.566Z,1513226129.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:29.932Z,1513226129.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:29.959Z,1513226129.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:30.351Z,1513226130.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:30.366Z,1513226130.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:30.781Z,1513226130.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:30.859Z,1513226130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:31.158Z,1513226131.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:31.173Z,1513226131.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:31.566Z,1513226131.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:31.594Z,1513226131.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:31.938Z,1513226131.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:31.970Z,1513226131.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:32.339Z,1513226132.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:32.356Z,1513226132.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:32.736Z,1513226132.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:32.751Z,1513226132.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:33.155Z,1513226133.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:33.196Z,1513226133.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:33.551Z,1513226133.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:33.584Z,1513226133.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:33.951Z,1513226133.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:33.983Z,1513226133.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:34.355Z,1513226134.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:34.391Z,1513226134.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:34.775Z,1513226134.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:34.799Z,1513226134.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:35.139Z,1513226135.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:35.157Z,1513226135.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:35.542Z,1513226135.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:35.559Z,1513226135.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:35.942Z,1513226135.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:36.030Z,1513226136.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:36.355Z,1513226136.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:36.370Z,1513226136.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:36.785Z,1513226136.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:36.837Z,1513226136.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:37.157Z,1513226137.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:37.172Z,1513226137.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:37.540Z,1513226137.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:37.596Z,1513226137.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:37.987Z,1513226137.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:38.015Z,1513226138.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:38.331Z,1513226138.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:38.362Z,1513226138.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:38.761Z,1513226138.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:38.784Z,1513226138.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:39.163Z,1513226139.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:39.184Z,1513226139.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:39.554Z,1513226139.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:39.575Z,1513226139.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:39.964Z,1513226139.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:39.983Z,1513226139.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:40.343Z,1513226140.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:40.379Z,1513226140.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:40.772Z,1513226140.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:40.815Z,1513226140.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:41.131Z,1513226141.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:41.203Z,1513226141.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:41.549Z,1513226141.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:41.584Z,1513226141.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:41.937Z,1513226141.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:41.952Z,1513226141.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:42.350Z,1513226142.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:42.377Z,1513226142.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:42.779Z,1513226142.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:42.811Z,1513226142.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:43.156Z,1513226143.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:43.171Z,1513226143.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:43.531Z,1513226143.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:43.563Z,1513226143.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:43.931Z,1513226143.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:43.957Z,1513226143.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:44.366Z,1513226144.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:44.401Z,1513226144.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:47.915Z,1513226147.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:47.964Z,1513226147.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:48.069Z,1513226148.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:48.089Z,1513226148.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:48.434Z,1513226148.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:48.471Z,1513226148.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:48.840Z,1513226148.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:48.875Z,1513226148.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:49.243Z,1513226149.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:49.287Z,1513226149.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:49.617Z,1513226149.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:49.632Z,1513226149.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:50.020Z,1513226150.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:50.035Z,1513226150.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:50.425Z,1513226150.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:50.447Z,1513226150.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:50.827Z,1513226150.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:50.847Z,1513226150.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:51.238Z,1513226151.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:51.278Z,1513226151.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:51.636Z,1513226151.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:51.660Z,1513226151.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:52.033Z,1513226152.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:52.056Z,1513226152.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:52.405Z,1513226152.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:52.432Z,1513226152.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:52.811Z,1513226152.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:52.837Z,1513226152.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:53.212Z,1513226153.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:53.239Z,1513226153.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:53.627Z,1513226153.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:53.648Z,1513226153.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:54.061Z,1513226154.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:54.104Z,1513226154.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:54.430Z,1513226154.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:54.482Z,1513226154.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:54.838Z,1513226154.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:54.860Z,1513226154.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:55.230Z,1513226155.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:55.263Z,1513226155.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:55.612Z,1513226155.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:55.638Z,1513226155.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:56.012Z,1513226156.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:56.027Z,1513226156.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:56.411Z,1513226156.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:56.428Z,1513226156.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:56.823Z,1513226156.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:56.856Z,1513226156.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:57.240Z,1513226157.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:57.293Z,1513226157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:57.634Z,1513226157.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:57.648Z,1513226157.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:58.034Z,1513226158.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:58.053Z,1513226158.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:58.412Z,1513226158.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:58.450Z,1513226158.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:58.840Z,1513226158.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:58.934Z,1513226158.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:59.215Z,1513226159.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:59.252Z,1513226159.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:35:59.616Z,1513226159.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:35:59.664Z,1513226159.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:00.015Z,1513226160.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:00.035Z,1513226160.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:00.478Z,1513226160.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:00.520Z,1513226160.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:00.834Z,1513226160.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:00.876Z,1513226160.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:01.238Z,1513226161.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:01.283Z,1513226161.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:01.612Z,1513226161.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:01.635Z,1513226161.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:02.013Z,1513226162.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:02.028Z,1513226162.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:02.423Z,1513226162.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:02.467Z,1513226162.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:02.821Z,1513226162.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:02.836Z,1513226162.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:03.225Z,1513226163.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:03.245Z,1513226163.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:03.661Z,1513226163.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:03.699Z,1513226163.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:04.041Z,1513226164.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:04.079Z,1513226164.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:04.421Z,1513226164.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:04.435Z,1513226164.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:04.821Z,1513226164.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:04.836Z,1513226164.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:05.225Z,1513226165.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:05.239Z,1513226165.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:05.622Z,1513226165.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:05.637Z,1513226165.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:06.070Z,1513226166.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:06.091Z,1513226166.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:06.428Z,1513226166.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:06.466Z,1513226166.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:06.835Z,1513226166.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:06.884Z,1513226166.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:07.231Z,1513226167.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:07.250Z,1513226167.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:07.615Z,1513226167.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:07.641Z,1513226167.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:08.012Z,1513226168.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:08.051Z,1513226168.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:08.416Z,1513226168.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:08.451Z,1513226168.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:08.811Z,1513226168.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:08.881Z,1513226168.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:09.231Z,1513226169.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:09.260Z,1513226169.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:09.631Z,1513226169.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:09.660Z,1513226169.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:10.050Z,1513226170.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:10.093Z,1513226170.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:10.418Z,1513226170.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:10.449Z,1513226170.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:10.839Z,1513226170.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:10.862Z,1513226170.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:11.226Z,1513226171.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:11.256Z,1513226171.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:11.618Z,1513226171.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:11.651Z,1513226171.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:12.015Z,1513226172.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:12.046Z,1513226172.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:12.434Z,1513226172.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:12.470Z,1513226172.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:12.856Z,1513226172.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:12.870Z,1513226172.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:13.256Z,1513226173.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:13.301Z,1513226173.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:13.627Z,1513226173.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:13.655Z,1513226173.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:14.019Z,1513226174.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:14.059Z,1513226174.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:14.420Z,1513226174.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:14.451Z,1513226174.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:14.820Z,1513226174.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:14.859Z,1513226174.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:15.235Z,1513226175.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:15.269Z,1513226175.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:15.639Z,1513226175.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:15.681Z,1513226175.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.030Z,1513226176.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:16.062Z,1513226176.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.467Z,1513226176.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:16.485Z,1513226176.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x64544 got:0x49060
2017-12-14T04:36:16.538Z,1513226176.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.820Z,1513226176.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:16.866Z,1513226176.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.866Z,1513226176.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2017-12-14T04:36:16.866Z,1513226176.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:36:16.868Z,1513226176.868 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.868Z,1513226176.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2017-12-14T04:36:16.868Z,1513226176.868 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:36:16.871Z,1513226176.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:16.871Z,1513226176.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2017-12-14T04:36:16.871Z,1513226176.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:36:16.883Z,1513226176.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:36:16.883Z,1513226176.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:36:16.883Z,1513226176.883 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:36:17.220Z,1513226177.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:17.265Z,1513226177.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:36:17.265Z,1513226177.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2017-12-14T04:36:17.265Z,1513226177.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:36:17.265Z,1513226177.265 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2017-12-14T04:36:17.266Z,1513226177.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:36:17.266Z,1513226177.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2017-12-14T04:36:17.618Z,1513226177.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:17.657Z,1513226177.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:36:17.657Z,1513226177.657 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:36:17.658Z,1513226177.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:36:17.658Z,1513226177.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:36:17.658Z,1513226177.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:36:17.659Z,1513226177.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:36:17.659Z,1513226177.659 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:36:17.659Z,1513226177.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:36:17.660Z,1513226177.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:36:18.014Z,1513226178.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:18.038Z,1513226178.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:18.429Z,1513226178.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:18.452Z,1513226178.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:18.836Z,1513226178.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:18.862Z,1513226178.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:19.235Z,1513226179.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:19.316Z,1513226179.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:19.694Z,1513226179.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:19.756Z,1513226179.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:20.016Z,1513226180.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:20.074Z,1513226180.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:20.465Z,1513226180.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:20.518Z,1513226180.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:20.833Z,1513226180.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:20.883Z,1513226180.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:21.240Z,1513226181.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:21.318Z,1513226181.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:21.632Z,1513226181.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:21.667Z,1513226181.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:22.074Z,1513226182.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:22.115Z,1513226182.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:22.422Z,1513226182.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:22.463Z,1513226182.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:22.828Z,1513226182.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:22.847Z,1513226182.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:23.213Z,1513226183.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:23.254Z,1513226183.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:23.618Z,1513226183.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:23.673Z,1513226183.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:24.018Z,1513226184.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:24.136Z,1513226184.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:24.425Z,1513226184.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:24.463Z,1513226184.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:24.828Z,1513226184.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:24.886Z,1513226184.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:25.240Z,1513226185.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:25.279Z,1513226185.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:25.655Z,1513226185.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:25.688Z,1513226185.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:26.036Z,1513226186.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:26.077Z,1513226186.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:26.424Z,1513226186.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:26.443Z,1513226186.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:26.812Z,1513226186.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:26.856Z,1513226186.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:27.225Z,1513226187.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:27.266Z,1513226187.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:27.638Z,1513226187.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:27.705Z,1513226187.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:28.050Z,1513226188.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:28.072Z,1513226188.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:28.411Z,1513226188.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:28.426Z,1513226188.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:28.832Z,1513226188.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:28.865Z,1513226188.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:29.220Z,1513226189.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:29.285Z,1513226189.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:29.620Z,1513226189.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:29.683Z,1513226189.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:30.020Z,1513226190.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:30.068Z,1513226190.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:30.429Z,1513226190.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:30.451Z,1513226190.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:30.849Z,1513226190.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:30.880Z,1513226190.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:31.262Z,1513226191.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:31.285Z,1513226191.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:31.640Z,1513226191.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:31.698Z,1513226191.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:32.033Z,1513226192.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:32.106Z,1513226192.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:32.414Z,1513226192.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:32.459Z,1513226192.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:32.813Z,1513226192.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:32.868Z,1513226192.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:33.238Z,1513226193.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:33.292Z,1513226193.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:33.640Z,1513226193.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:33.668Z,1513226193.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:34.023Z,1513226194.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:34.089Z,1513226194.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:34.412Z,1513226194.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:34.467Z,1513226194.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:34.839Z,1513226194.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:34.901Z,1513226194.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:35.246Z,1513226195.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:35.276Z,1513226195.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:35.624Z,1513226195.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:35.651Z,1513226195.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:36.012Z,1513226196.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:36.079Z,1513226196.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:36.452Z,1513226196.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:36.496Z,1513226196.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:36.835Z,1513226196.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:36.884Z,1513226196.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:37.235Z,1513226197.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:37.287Z,1513226197.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:37.638Z,1513226197.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:37.689Z,1513226197.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:38.026Z,1513226198.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:38.077Z,1513226198.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:38.424Z,1513226198.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:38.451Z,1513226198.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:38.839Z,1513226198.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:38.882Z,1513226198.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:39.238Z,1513226199.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:39.309Z,1513226199.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:39.636Z,1513226199.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:39.666Z,1513226199.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:40.065Z,1513226200.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:40.107Z,1513226200.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:40.417Z,1513226200.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:40.500Z,1513226200.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:40.817Z,1513226200.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:40.873Z,1513226200.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:41.220Z,1513226201.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:41.236Z,1513226201.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:41.620Z,1513226201.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:41.668Z,1513226201.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:42.017Z,1513226202.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:42.032Z,1513226202.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:42.433Z,1513226202.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:42.479Z,1513226202.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:42.825Z,1513226202.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:42.874Z,1513226202.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:43.246Z,1513226203.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:43.275Z,1513226203.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:43.619Z,1513226203.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:43.651Z,1513226203.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:44.024Z,1513226204.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:44.038Z,1513226204.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:44.426Z,1513226204.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:44.441Z,1513226204.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:48.026Z,1513226208.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:48.048Z,1513226208.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:48.150Z,1513226208.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:48.175Z,1513226208.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:48.550Z,1513226208.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:48.579Z,1513226208.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:48.971Z,1513226208.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:48.998Z,1513226208.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:49.335Z,1513226209.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:49.355Z,1513226209.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:49.740Z,1513226209.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:49.755Z,1513226209.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:50.138Z,1513226210.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:50.159Z,1513226210.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:50.538Z,1513226210.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:50.587Z,1513226210.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:50.942Z,1513226210.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:50.957Z,1513226210.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:51.341Z,1513226211.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:51.356Z,1513226211.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:51.736Z,1513226211.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:51.751Z,1513226211.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:52.136Z,1513226212.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:52.151Z,1513226212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:52.549Z,1513226212.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:52.564Z,1513226212.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:52.934Z,1513226212.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:52.956Z,1513226212.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:53.345Z,1513226213.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:53.361Z,1513226213.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:53.748Z,1513226213.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:53.763Z,1513226213.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:54.150Z,1513226214.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:54.171Z,1513226214.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:54.540Z,1513226214.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:54.559Z,1513226214.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:54.928Z,1513226214.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:54.965Z,1513226214.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:55.392Z,1513226215.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:55.455Z,1513226215.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:55.727Z,1513226215.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:55.760Z,1513226215.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:56.149Z,1513226216.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:56.164Z,1513226216.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:56.541Z,1513226216.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:56.556Z,1513226216.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:56.946Z,1513226216.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:56.961Z,1513226216.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:57.345Z,1513226217.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:57.360Z,1513226217.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:57.740Z,1513226217.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:57.756Z,1513226217.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:58.131Z,1513226218.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:58.154Z,1513226218.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:58.585Z,1513226218.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:58.646Z,1513226218.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:58.950Z,1513226218.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:58.971Z,1513226218.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:59.345Z,1513226219.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:59.373Z,1513226219.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:36:59.732Z,1513226219.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:36:59.796Z,1513226219.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:00.131Z,1513226220.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:00.159Z,1513226220.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:00.532Z,1513226220.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:00.558Z,1513226220.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:00.931Z,1513226220.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:00.957Z,1513226220.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:01.346Z,1513226221.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:01.407Z,1513226221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:01.770Z,1513226221.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:01.811Z,1513226221.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:02.164Z,1513226222.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:02.179Z,1513226222.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:02.529Z,1513226222.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:02.579Z,1513226222.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:02.931Z,1513226222.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:02.979Z,1513226222.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:03.338Z,1513226223.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:03.353Z,1513226223.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:03.736Z,1513226223.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:03.776Z,1513226223.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:04.134Z,1513226224.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:04.157Z,1513226224.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:04.548Z,1513226224.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:04.595Z,1513226224.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:05.004Z,1513226225.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:05.031Z,1513226225.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:05.340Z,1513226225.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:05.368Z,1513226225.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:05.735Z,1513226225.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:05.824Z,1513226225.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:06.129Z,1513226226.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:06.144Z,1513226226.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:06.535Z,1513226226.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:06.571Z,1513226226.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:06.935Z,1513226226.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:06.973Z,1513226226.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:07.340Z,1513226227.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:07.375Z,1513226227.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:07.745Z,1513226227.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:07.769Z,1513226227.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:08.145Z,1513226228.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:08.172Z,1513226228.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:08.534Z,1513226228.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:08.549Z,1513226228.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:08.938Z,1513226228.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:08.953Z,1513226228.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:09.332Z,1513226229.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:09.348Z,1513226229.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:09.736Z,1513226229.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:09.759Z,1513226229.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:10.136Z,1513226230.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:10.150Z,1513226230.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:10.541Z,1513226230.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:10.555Z,1513226230.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:10.938Z,1513226230.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:10.952Z,1513226230.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:11.375Z,1513226231.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:11.402Z,1513226231.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:11.735Z,1513226231.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:11.755Z,1513226231.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:12.138Z,1513226232.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:12.189Z,1513226232.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:12.537Z,1513226232.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:12.551Z,1513226232.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:12.940Z,1513226232.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:12.955Z,1513226232.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:13.346Z,1513226233.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:13.360Z,1513226233.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:13.746Z,1513226233.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:13.760Z,1513226233.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:14.141Z,1513226234.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:14.157Z,1513226234.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:14.532Z,1513226234.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:14.579Z,1513226234.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:14.943Z,1513226234.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:14.979Z,1513226234.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:15.337Z,1513226235.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:15.352Z,1513226235.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:15.732Z,1513226235.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:15.749Z,1513226235.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:16.135Z,1513226236.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:16.150Z,1513226236.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:16.545Z,1513226236.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:16.560Z,1513226236.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:16.942Z,1513226236.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:16.957Z,1513226236.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:17.350Z,1513226237.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:17.384Z,1513226237.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:17.731Z,1513226237.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:17.751Z,1513226237.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:18.127Z,1513226238.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:18.152Z,1513226238.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:18.527Z,1513226238.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:18.559Z,1513226238.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:18.937Z,1513226238.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:18.952Z,1513226238.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:19.350Z,1513226239.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:19.380Z,1513226239.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:19.747Z,1513226239.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:19.773Z,1513226239.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:20.150Z,1513226240.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:20.179Z,1513226240.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:20.532Z,1513226240.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:20.559Z,1513226240.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:20.972Z,1513226240.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:20.988Z,1513226240.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:21.336Z,1513226241.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:21.351Z,1513226241.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:21.736Z,1513226241.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:21.751Z,1513226241.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:22.134Z,1513226242.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:22.149Z,1513226242.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:22.542Z,1513226242.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:22.557Z,1513226242.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:22.942Z,1513226242.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:23.006Z,1513226243.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:23.340Z,1513226243.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:23.363Z,1513226243.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:23.741Z,1513226243.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:23.756Z,1513226243.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:24.145Z,1513226244.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:24.272Z,1513226244.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:24.537Z,1513226244.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:24.559Z,1513226244.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:24.941Z,1513226244.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:24.994Z,1513226244.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:25.352Z,1513226245.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:25.368Z,1513226245.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:25.752Z,1513226245.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:25.798Z,1513226245.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:26.151Z,1513226246.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:26.171Z,1513226246.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:26.540Z,1513226246.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:26.559Z,1513226246.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:26.928Z,1513226246.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:26.959Z,1513226246.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:27.327Z,1513226247.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:27.356Z,1513226247.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:27.728Z,1513226247.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:27.751Z,1513226247.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:28.130Z,1513226248.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:28.163Z,1513226248.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:28.554Z,1513226248.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:28.575Z,1513226248.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:28.949Z,1513226248.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:28.968Z,1513226248.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:29.338Z,1513226249.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:29.371Z,1513226249.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:29.731Z,1513226249.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:29.763Z,1513226249.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:30.131Z,1513226250.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:30.171Z,1513226250.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:30.586Z,1513226250.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:30.630Z,1513226250.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:30.927Z,1513226250.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:30.956Z,1513226250.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:31.346Z,1513226251.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:31.361Z,1513226251.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:31.750Z,1513226251.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:31.764Z,1513226251.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:32.154Z,1513226252.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:32.169Z,1513226252.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:32.521Z,1513226252.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:32.555Z,1513226252.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:32.927Z,1513226252.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:32.959Z,1513226252.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:33.342Z,1513226253.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:33.357Z,1513226253.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:33.737Z,1513226253.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:33.767Z,1513226253.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:34.127Z,1513226254.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:34.192Z,1513226254.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:34.552Z,1513226254.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:34.575Z,1513226254.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:34.949Z,1513226254.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:34.971Z,1513226254.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:35.346Z,1513226255.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:35.374Z,1513226255.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:35.731Z,1513226255.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:35.758Z,1513226255.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:36.128Z,1513226256.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:36.159Z,1513226256.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:36.532Z,1513226256.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:36.563Z,1513226256.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:36.972Z,1513226256.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:37.016Z,1513226257.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:37.337Z,1513226257.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:37.367Z,1513226257.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:37.741Z,1513226257.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:37.771Z,1513226257.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:38.155Z,1513226258.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:38.170Z,1513226258.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:38.528Z,1513226258.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:38.563Z,1513226258.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:38.931Z,1513226258.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:38.946Z,1513226258.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:39.343Z,1513226259.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:39.374Z,1513226259.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:39.736Z,1513226259.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:39.787Z,1513226259.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:40.170Z,1513226260.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:40.188Z,1513226260.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:40.541Z,1513226260.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:40.556Z,1513226260.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:40.942Z,1513226260.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:40.956Z,1513226260.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:41.339Z,1513226261.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:41.354Z,1513226261.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:41.737Z,1513226261.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:41.753Z,1513226261.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:42.130Z,1513226262.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:42.155Z,1513226262.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:42.542Z,1513226262.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:42.556Z,1513226262.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:42.938Z,1513226262.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:42.955Z,1513226262.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:43.382Z,1513226263.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:43.401Z,1513226263.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:43.745Z,1513226263.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:43.767Z,1513226263.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:44.146Z,1513226264.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:44.163Z,1513226264.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:44.167Z,1513226264.167 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:32:43.9Z
2017-12-14T04:37:44.167Z,1513226264.167 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:37:44.167Z,1513226264.167 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:37:44.539Z,1513226264.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:44.560Z,1513226264.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:48.471Z,1513226268.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:48.504Z,1513226268.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:48.578Z,1513226268.578 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0096.lzma
2017-12-14T04:37:48.600Z,1513226268.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:48.651Z,1513226268.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:49.028Z,1513226269.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:49.086Z,1513226269.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:49.383Z,1513226269.383 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0096.lzma.bak
2017-12-14T04:37:49.383Z,1513226269.383 [DataOverHttps](INFO): SBD MOMSN=5437731
2017-12-14T04:37:49.438Z,1513226269.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:49.453Z,1513226269.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:51.048Z,1513226271.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:51.088Z,1513226271.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:51.182Z,1513226271.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:51.226Z,1513226271.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:54.542Z,1513226274.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:54.578Z,1513226274.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:54.653Z,1513226274.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:54.699Z,1513226274.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:55.111Z,1513226275.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:55.144Z,1513226275.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:55.454Z,1513226275.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:55.475Z,1513226275.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:55.847Z,1513226275.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:55.875Z,1513226275.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:56.266Z,1513226276.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:56.311Z,1513226276.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:59.711Z,1513226279.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:59.762Z,1513226279.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:37:59.844Z,1513226279.844 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0097.lzma
2017-12-14T04:37:59.866Z,1513226279.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:37:59.916Z,1513226279.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:00.225Z,1513226280.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:00.240Z,1513226280.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:00.588Z,1513226280.588 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0097.lzma.bak
2017-12-14T04:38:00.589Z,1513226280.589 [DataOverHttps](INFO): SBD MOMSN=5437733
2017-12-14T04:38:00.637Z,1513226280.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:00.663Z,1513226280.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:01.855Z,1513226281.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:01.883Z,1513226281.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:01.886Z,1513226281.886 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:38:01.886Z,1513226281.886 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:38:01.887Z,1513226281.887 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:38:01.975Z,1513226281.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:02.007Z,1513226282.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:05.434Z,1513226285.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:05.449Z,1513226285.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:05.548Z,1513226285.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:05.595Z,1513226285.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:05.931Z,1513226285.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:05.954Z,1513226285.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:06.334Z,1513226286.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:06.349Z,1513226286.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:06.706Z,1513226286.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:06.720Z,1513226286.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:07.117Z,1513226287.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:07.163Z,1513226287.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:07.507Z,1513226287.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:07.522Z,1513226287.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:07.910Z,1513226287.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:07.925Z,1513226287.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:08.321Z,1513226288.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:08.355Z,1513226288.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:08.718Z,1513226288.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:08.732Z,1513226288.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:09.152Z,1513226289.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:09.191Z,1513226289.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:09.503Z,1513226289.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:09.530Z,1513226289.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:09.900Z,1513226289.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:09.938Z,1513226289.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:10.305Z,1513226290.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:10.333Z,1513226290.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:10.758Z,1513226290.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:10.789Z,1513226290.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:11.108Z,1513226291.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:11.140Z,1513226291.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:11.522Z,1513226291.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:11.551Z,1513226291.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:11.918Z,1513226291.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:11.000Z,1513226292.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:12.349Z,1513226292.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:12.369Z,1513226292.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:12.753Z,1513226292.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:12.808Z,1513226292.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:13.103Z,1513226293.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:13.135Z,1513226293.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:13.500Z,1513226293.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:13.543Z,1513226293.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:13.903Z,1513226293.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:13.938Z,1513226293.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:14.313Z,1513226294.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:14.339Z,1513226294.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:14.779Z,1513226294.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:14.795Z,1513226294.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:15.114Z,1513226295.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:15.152Z,1513226295.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:15.503Z,1513226295.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:15.552Z,1513226295.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:15.905Z,1513226295.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:15.939Z,1513226295.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:16.307Z,1513226296.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:16.340Z,1513226296.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:16.752Z,1513226296.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:16.789Z,1513226296.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:17.115Z,1513226297.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:17.138Z,1513226297.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:17.522Z,1513226297.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:17.543Z,1513226297.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:17.922Z,1513226297.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:18.011Z,1513226298.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:18.322Z,1513226298.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:18.337Z,1513226298.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:18.765Z,1513226298.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:18.861Z,1513226298.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:19.112Z,1513226299.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:19.131Z,1513226299.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:19.504Z,1513226299.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:19.539Z,1513226299.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:19.898Z,1513226299.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:19.931Z,1513226299.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:20.317Z,1513226300.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:20.343Z,1513226300.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:20.721Z,1513226300.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:20.737Z,1513226300.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:21.128Z,1513226301.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:21.147Z,1513226301.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:21.518Z,1513226301.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:21.535Z,1513226301.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:21.900Z,1513226301.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:21.952Z,1513226301.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:22.300Z,1513226302.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:22.343Z,1513226302.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:22.699Z,1513226302.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:22.737Z,1513226302.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:23.101Z,1513226303.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:23.149Z,1513226303.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:23.522Z,1513226303.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:23.541Z,1513226303.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:23.927Z,1513226303.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:23.941Z,1513226303.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:24.327Z,1513226304.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:24.342Z,1513226304.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:24.764Z,1513226304.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:24.788Z,1513226304.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:25.194Z,1513226305.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:25.241Z,1513226305.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:25.512Z,1513226305.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:25.545Z,1513226305.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:25.897Z,1513226305.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:25.912Z,1513226305.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:26.321Z,1513226306.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:26.342Z,1513226306.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:26.767Z,1513226306.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:26.799Z,1513226306.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:27.123Z,1513226307.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:27.148Z,1513226307.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:27.507Z,1513226307.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:27.543Z,1513226307.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:27.905Z,1513226307.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:27.920Z,1513226307.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:28.304Z,1513226308.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:28.326Z,1513226308.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:28.759Z,1513226308.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:28.777Z,1513226308.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:29.115Z,1513226309.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:29.138Z,1513226309.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:29.521Z,1513226309.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:29.553Z,1513226309.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:29.917Z,1513226309.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:29.932Z,1513226309.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:30.321Z,1513226310.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:30.336Z,1513226310.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:30.752Z,1513226310.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:30.795Z,1513226310.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:31.115Z,1513226311.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:31.135Z,1513226311.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:31.525Z,1513226311.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:31.568Z,1513226311.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:31.899Z,1513226311.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:31.926Z,1513226311.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:32.327Z,1513226312.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:32.347Z,1513226312.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:32.744Z,1513226312.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:32.828Z,1513226312.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:33.123Z,1513226313.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:33.170Z,1513226313.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:33.503Z,1513226313.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:33.540Z,1513226313.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:33.903Z,1513226313.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:33.979Z,1513226313.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:34.311Z,1513226314.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:34.331Z,1513226314.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:34.733Z,1513226314.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:34.808Z,1513226314.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:35.121Z,1513226315.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:35.156Z,1513226315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:35.515Z,1513226315.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:35.571Z,1513226315.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:35.914Z,1513226315.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:35.935Z,1513226315.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:36.316Z,1513226316.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:36.331Z,1513226316.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:36.713Z,1513226316.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:36.728Z,1513226316.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:37.121Z,1513226317.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:37.162Z,1513226317.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:37.502Z,1513226317.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:37.538Z,1513226317.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:37.923Z,1513226317.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:37.954Z,1513226317.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:38.324Z,1513226318.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:38.339Z,1513226318.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:38.765Z,1513226318.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:38.792Z,1513226318.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:39.129Z,1513226319.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:39.143Z,1513226319.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:39.501Z,1513226319.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:39.516Z,1513226319.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:39.905Z,1513226319.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:39.920Z,1513226319.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:40.308Z,1513226320.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:40.324Z,1513226320.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:40.747Z,1513226320.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:40.761Z,1513226320.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:41.151Z,1513226321.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:41.172Z,1513226321.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:41.519Z,1513226321.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:41.534Z,1513226321.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:41.923Z,1513226321.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:41.937Z,1513226321.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:42.323Z,1513226322.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:42.338Z,1513226322.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:42.744Z,1513226322.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:42.773Z,1513226322.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:43.102Z,1513226323.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:43.134Z,1513226323.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:43.504Z,1513226323.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:43.529Z,1513226323.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:43.899Z,1513226323.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:43.976Z,1513226323.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:44.323Z,1513226324.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:44.388Z,1513226324.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:44.754Z,1513226324.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:44.778Z,1513226324.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:45.124Z,1513226325.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:45.143Z,1513226325.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:45.504Z,1513226325.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:45.531Z,1513226325.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:45.909Z,1513226325.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:45.924Z,1513226325.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:46.315Z,1513226326.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:46.344Z,1513226326.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:46.707Z,1513226326.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:46.783Z,1513226326.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:47.110Z,1513226327.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:47.158Z,1513226327.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:47.532Z,1513226327.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:47.568Z,1513226327.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:47.927Z,1513226327.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:47.963Z,1513226327.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:48.322Z,1513226328.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:48.336Z,1513226328.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:48.713Z,1513226328.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:48.728Z,1513226328.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:49.105Z,1513226329.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:49.140Z,1513226329.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:49.501Z,1513226329.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:49.535Z,1513226329.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:49.903Z,1513226329.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:49.939Z,1513226329.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:50.310Z,1513226330.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:50.347Z,1513226330.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:50.757Z,1513226330.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:50.800Z,1513226330.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:51.129Z,1513226331.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:51.148Z,1513226331.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:51.502Z,1513226331.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:51.533Z,1513226331.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:51.900Z,1513226331.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:51.915Z,1513226331.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:52.300Z,1513226332.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:52.316Z,1513226332.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:52.780Z,1513226332.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:52.816Z,1513226332.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:53.118Z,1513226333.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:53.134Z,1513226333.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:53.522Z,1513226333.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:53.543Z,1513226333.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:53.957Z,1513226333.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:53.976Z,1513226333.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:54.324Z,1513226334.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:54.348Z,1513226334.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:54.764Z,1513226334.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:54.792Z,1513226334.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:55.111Z,1513226335.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:55.132Z,1513226335.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:55.512Z,1513226335.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:55.527Z,1513226335.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:55.912Z,1513226335.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:55.927Z,1513226335.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:56.325Z,1513226336.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:56.413Z,1513226336.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:56.779Z,1513226336.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:56.799Z,1513226336.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:57.131Z,1513226337.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:57.195Z,1513226337.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:57.499Z,1513226337.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:57.524Z,1513226337.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:57.899Z,1513226337.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:57.967Z,1513226337.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:58.299Z,1513226338.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:58.325Z,1513226338.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:58.767Z,1513226338.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:58.796Z,1513226338.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:59.104Z,1513226339.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:59.139Z,1513226339.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:59.523Z,1513226339.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:59.538Z,1513226339.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:38:59.921Z,1513226339.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:38:59.936Z,1513226339.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:00.350Z,1513226340.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:00.389Z,1513226340.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:00.699Z,1513226340.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:00.787Z,1513226340.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:01.116Z,1513226341.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:01.138Z,1513226341.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:01.500Z,1513226341.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:01.515Z,1513226341.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:01.902Z,1513226341.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:01.916Z,1513226341.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:02.321Z,1513226342.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:02.345Z,1513226342.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:04.282Z,1513226344.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:05.077Z,1513226345.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:05.481Z,1513226345.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:05.839Z,1513226345.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:05.854Z,1513226345.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:05.867Z,1513226345.867 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:39:05.966Z,1513226345.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:06.023Z,1513226346.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:06.308Z,1513226346.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:06.323Z,1513226346.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:06.783Z,1513226346.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:06.826Z,1513226346.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:07.112Z,1513226347.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:07.129Z,1513226347.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:07.515Z,1513226347.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:07.530Z,1513226347.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:07.913Z,1513226347.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:07.928Z,1513226347.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:08.319Z,1513226348.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:08.339Z,1513226348.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:08.773Z,1513226348.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:08.795Z,1513226348.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:09.128Z,1513226349.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:09.143Z,1513226349.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:09.511Z,1513226349.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:09.526Z,1513226349.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:09.910Z,1513226349.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:09.925Z,1513226349.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:10.299Z,1513226350.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:10.329Z,1513226350.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:10.769Z,1513226350.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:10.788Z,1513226350.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:11.118Z,1513226351.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:11.132Z,1513226351.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:11.527Z,1513226351.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:11.547Z,1513226351.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:11.925Z,1513226351.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:11.940Z,1513226351.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:12.326Z,1513226352.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:12.340Z,1513226352.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:12.764Z,1513226352.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:12.787Z,1513226352.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:13.131Z,1513226353.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:13.163Z,1513226353.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:13.512Z,1513226353.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:13.538Z,1513226353.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:13.907Z,1513226353.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:13.943Z,1513226353.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:14.318Z,1513226354.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:14.348Z,1513226354.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:14.717Z,1513226354.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:14.811Z,1513226354.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:15.134Z,1513226355.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:15.157Z,1513226355.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:15.501Z,1513226355.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:15.538Z,1513226355.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:15.904Z,1513226355.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:15.930Z,1513226355.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:16.327Z,1513226356.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:16.432Z,1513226356.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:16.701Z,1513226356.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:16.731Z,1513226356.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:17.108Z,1513226357.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:17.131Z,1513226357.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:17.519Z,1513226357.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:17.548Z,1513226357.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:17.932Z,1513226357.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:18.006Z,1513226358.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:18.006Z,1513226358.006 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2017-12-14T04:39:18.007Z,1513226358.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:39:18.008Z,1513226358.008 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:18.008Z,1513226358.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2017-12-14T04:39:18.013Z,1513226358.013 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:39:18.015Z,1513226358.015 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:18.015Z,1513226358.015 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2017-12-14T04:39:18.015Z,1513226358.015 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:39:18.061Z,1513226358.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:39:18.061Z,1513226358.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:39:18.062Z,1513226358.062 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:39:18.323Z,1513226358.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:18.420Z,1513226358.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:39:18.421Z,1513226358.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2017-12-14T04:39:18.421Z,1513226358.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:39:18.421Z,1513226358.421 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2017-12-14T04:39:18.422Z,1513226358.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:39:18.422Z,1513226358.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2017-12-14T04:39:18.705Z,1513226358.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:18.720Z,1513226358.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:39:18.720Z,1513226358.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:39:18.721Z,1513226358.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:39:18.721Z,1513226358.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:39:18.722Z,1513226358.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:39:18.722Z,1513226358.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:39:18.722Z,1513226358.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:39:18.723Z,1513226358.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:39:18.723Z,1513226358.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:39:19.118Z,1513226359.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:19.159Z,1513226359.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:19.510Z,1513226359.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:19.598Z,1513226359.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:19.907Z,1513226359.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:19.927Z,1513226359.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:20.310Z,1513226360.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:20.367Z,1513226360.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:20.771Z,1513226360.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:20.804Z,1513226360.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:21.116Z,1513226361.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:21.131Z,1513226361.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:21.507Z,1513226361.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:21.522Z,1513226361.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:21.906Z,1513226361.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:21.921Z,1513226361.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:22.311Z,1513226362.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:22.327Z,1513226362.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:22.780Z,1513226362.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:22.856Z,1513226362.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:23.099Z,1513226363.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:23.135Z,1513226363.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:23.517Z,1513226363.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:23.539Z,1513226363.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:23.918Z,1513226363.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:23.940Z,1513226363.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:24.318Z,1513226364.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:24.340Z,1513226364.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:24.780Z,1513226364.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:24.806Z,1513226364.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:25.108Z,1513226365.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:25.150Z,1513226365.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:25.508Z,1513226365.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:25.523Z,1513226365.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:25.903Z,1513226365.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:25.918Z,1513226365.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:26.317Z,1513226366.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:26.332Z,1513226366.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:26.767Z,1513226366.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:26.804Z,1513226366.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:27.114Z,1513226367.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:27.157Z,1513226367.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:27.500Z,1513226367.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:27.531Z,1513226367.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:27.899Z,1513226367.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:27.929Z,1513226367.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:28.304Z,1513226368.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:28.332Z,1513226368.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:28.705Z,1513226368.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:28.824Z,1513226368.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:29.126Z,1513226369.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:29.166Z,1513226369.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:29.509Z,1513226369.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:29.546Z,1513226369.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:29.928Z,1513226369.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:29.943Z,1513226369.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:30.328Z,1513226370.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:30.343Z,1513226370.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:30.704Z,1513226370.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:30.743Z,1513226370.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:31.106Z,1513226371.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:31.152Z,1513226371.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:31.508Z,1513226371.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:31.539Z,1513226371.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:31.899Z,1513226371.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:31.927Z,1513226371.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:32.332Z,1513226372.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:32.356Z,1513226372.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:32.717Z,1513226372.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:32.738Z,1513226372.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:33.123Z,1513226373.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:33.150Z,1513226373.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:33.513Z,1513226373.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:33.528Z,1513226373.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:33.907Z,1513226373.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:33.922Z,1513226373.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:34.309Z,1513226374.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:34.323Z,1513226374.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:34.766Z,1513226374.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:34.810Z,1513226374.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:35.115Z,1513226375.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:35.130Z,1513226375.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:35.552Z,1513226375.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:35.583Z,1513226375.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:35.921Z,1513226375.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:35.943Z,1513226375.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:36.322Z,1513226376.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:36.343Z,1513226376.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:36.755Z,1513226376.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:36.797Z,1513226376.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:37.111Z,1513226377.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:37.141Z,1513226377.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:37.508Z,1513226377.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:37.540Z,1513226377.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:37.912Z,1513226377.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:37.988Z,1513226377.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:38.327Z,1513226378.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:38.347Z,1513226378.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:38.775Z,1513226378.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:38.810Z,1513226378.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:39.141Z,1513226379.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:39.156Z,1513226379.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:39.506Z,1513226379.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:39.539Z,1513226379.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:39.905Z,1513226379.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:39.920Z,1513226379.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:40.307Z,1513226380.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:40.322Z,1513226380.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:40.765Z,1513226380.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:40.863Z,1513226380.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:41.110Z,1513226381.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:41.135Z,1513226381.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:41.516Z,1513226381.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:41.531Z,1513226381.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:41.917Z,1513226381.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:42.004Z,1513226382.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:42.318Z,1513226382.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:42.339Z,1513226382.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:42.709Z,1513226382.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:42.790Z,1513226382.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:43.120Z,1513226383.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:43.148Z,1513226383.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:43.505Z,1513226383.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:43.533Z,1513226383.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:43.899Z,1513226383.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:43.952Z,1513226383.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:44.326Z,1513226384.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:44.341Z,1513226384.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:44.733Z,1513226384.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:44.748Z,1513226384.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:45.171Z,1513226385.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:45.210Z,1513226385.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:45.504Z,1513226385.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:45.531Z,1513226385.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:45.910Z,1513226385.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:45.924Z,1513226385.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:46.284Z,1513226386.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:46.308Z,1513226386.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:46.323Z,1513226386.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:46.707Z,1513226386.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:46.725Z,1513226386.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:47.077Z,1513226387.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:47.120Z,1513226387.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:47.154Z,1513226387.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:47.481Z,1513226387.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:47.517Z,1513226387.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:47.531Z,1513226387.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:47.914Z,1513226387.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:47.929Z,1513226387.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:48.277Z,1513226388.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:48.315Z,1513226388.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:48.367Z,1513226388.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:48.770Z,1513226388.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:48.793Z,1513226388.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:49.077Z,1513226389.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:49.111Z,1513226389.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:49.143Z,1513226389.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:49.481Z,1513226389.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:49.518Z,1513226389.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:49.537Z,1513226389.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:49.900Z,1513226389.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:49.927Z,1513226389.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:50.277Z,1513226390.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:50.326Z,1513226390.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:50.341Z,1513226390.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:50.777Z,1513226390.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:50.827Z,1513226390.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:51.081Z,1513226391.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:51.128Z,1513226391.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:51.144Z,1513226391.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:51.485Z,1513226391.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:51.530Z,1513226391.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:51.562Z,1513226391.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:51.924Z,1513226391.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:51.938Z,1513226391.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:52.281Z,1513226392.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:52.300Z,1513226392.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:52.331Z,1513226392.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:52.780Z,1513226392.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:52.798Z,1513226392.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:53.077Z,1513226393.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:53.099Z,1513226393.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:53.135Z,1513226393.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:53.481Z,1513226393.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:53.532Z,1513226393.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:53.547Z,1513226393.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:53.924Z,1513226393.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:53.939Z,1513226393.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:54.277Z,1513226394.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:54.322Z,1513226394.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:54.344Z,1513226394.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:54.843Z,1513226394.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:54.910Z,1513226394.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:55.077Z,1513226395.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:55.114Z,1513226395.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:55.151Z,1513226395.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:55.481Z,1513226395.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:55.510Z,1513226395.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:55.524Z,1513226395.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:55.910Z,1513226395.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:55.925Z,1513226395.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:56.326Z,1513226396.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:56.356Z,1513226396.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:56.719Z,1513226396.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:56.803Z,1513226396.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:57.126Z,1513226397.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:57.140Z,1513226397.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:57.507Z,1513226397.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:57.524Z,1513226397.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:57.907Z,1513226397.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:57.924Z,1513226397.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:58.326Z,1513226398.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:58.341Z,1513226398.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:58.715Z,1513226398.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:58.732Z,1513226398.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:59.112Z,1513226399.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:59.142Z,1513226399.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:59.522Z,1513226399.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:39:59.540Z,1513226399.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:39:59.927Z,1513226399.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:00.043Z,1513226400.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:00.322Z,1513226400.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:00.337Z,1513226400.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:00.553Z,1513226400.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:00.714Z,1513226400.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:00.729Z,1513226400.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:01.135Z,1513226401.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:01.181Z,1513226401.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:01.350Z,1513226401.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:01.500Z,1513226401.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:01.532Z,1513226401.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:01.753Z,1513226401.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:01.900Z,1513226401.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:01.931Z,1513226401.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:02.326Z,1513226402.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:02.341Z,1513226402.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:02.550Z,1513226402.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:02.788Z,1513226402.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:02.878Z,1513226402.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:03.137Z,1513226403.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:03.934Z,1513226403.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:04.736Z,1513226404.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:05.141Z,1513226405.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:05.938Z,1513226405.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:06.184Z,1513226406.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:06.199Z,1513226406.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:06.301Z,1513226406.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:06.346Z,1513226406.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:06.654Z,1513226406.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:06.735Z,1513226406.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:06.754Z,1513226406.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:07.064Z,1513226407.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:07.079Z,1513226407.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:07.141Z,1513226407.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:07.448Z,1513226407.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:07.543Z,1513226407.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:07.847Z,1513226407.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:07.883Z,1513226407.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:07.937Z,1513226407.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:08.275Z,1513226408.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:08.289Z,1513226408.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:08.686Z,1513226408.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:08.735Z,1513226408.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:08.755Z,1513226408.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:09.070Z,1513226409.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:09.090Z,1513226409.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:09.153Z,1513226409.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:09.447Z,1513226409.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:09.483Z,1513226409.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:09.851Z,1513226409.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:09.882Z,1513226409.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:09.950Z,1513226409.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:10.247Z,1513226410.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:10.269Z,1513226410.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:10.648Z,1513226410.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:10.662Z,1513226410.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:10.749Z,1513226410.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:11.055Z,1513226411.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:11.075Z,1513226411.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:11.201Z,1513226411.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:11.460Z,1513226411.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:11.507Z,1513226411.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:11.861Z,1513226411.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:11.875Z,1513226411.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:11.997Z,1513226411.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:12.261Z,1513226412.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:12.276Z,1513226412.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:12.655Z,1513226412.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:12.680Z,1513226412.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:12.793Z,1513226412.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:13.100Z,1513226413.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:13.147Z,1513226413.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:13.463Z,1513226413.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:13.478Z,1513226413.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:13.518Z,1513226413.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:13.847Z,1513226413.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:13.879Z,1513226413.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:14.261Z,1513226414.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:14.291Z,1513226414.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:14.313Z,1513226414.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:14.672Z,1513226414.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:14.687Z,1513226414.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:15.112Z,1513226415.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:15.117Z,1513226415.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:15.143Z,1513226415.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:15.448Z,1513226415.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:15.486Z,1513226415.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:15.517Z,1513226415.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:15.852Z,1513226415.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:15.903Z,1513226415.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:16.247Z,1513226416.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:16.284Z,1513226416.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:16.314Z,1513226416.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:16.648Z,1513226416.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:16.698Z,1513226416.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:17.062Z,1513226417.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:17.093Z,1513226417.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:17.114Z,1513226417.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:17.474Z,1513226417.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:17.488Z,1513226417.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:17.517Z,1513226417.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:17.872Z,1513226417.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:17.887Z,1513226417.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:18.269Z,1513226418.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:18.291Z,1513226418.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:18.313Z,1513226418.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:18.659Z,1513226418.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:18.754Z,1513226418.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:19.051Z,1513226419.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:19.089Z,1513226419.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:19.109Z,1513226419.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:19.446Z,1513226419.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:19.461Z,1513226419.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:19.513Z,1513226419.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:19.855Z,1513226419.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:19.894Z,1513226419.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:20.282Z,1513226420.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:20.307Z,1513226420.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:20.310Z,1513226420.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:20.661Z,1513226420.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:20.740Z,1513226420.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:21.061Z,1513226421.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:21.076Z,1513226421.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:21.106Z,1513226421.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:21.461Z,1513226421.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:21.475Z,1513226421.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:21.509Z,1513226421.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:21.861Z,1513226421.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:21.876Z,1513226421.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:22.250Z,1513226422.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:22.274Z,1513226422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:22.306Z,1513226422.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:22.660Z,1513226422.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:22.740Z,1513226422.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:23.047Z,1513226423.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:23.082Z,1513226423.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:23.101Z,1513226423.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:23.483Z,1513226423.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:23.506Z,1513226423.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:23.532Z,1513226423.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:23.875Z,1513226423.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:23.895Z,1513226423.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:24.272Z,1513226424.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:24.291Z,1513226424.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:24.302Z,1513226424.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:24.647Z,1513226424.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:24.684Z,1513226424.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:25.047Z,1513226425.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:25.092Z,1513226425.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:25.097Z,1513226425.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:25.453Z,1513226425.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:25.484Z,1513226425.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:25.501Z,1513226425.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:25.852Z,1513226425.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:25.887Z,1513226425.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:26.269Z,1513226426.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:26.294Z,1513226426.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:26.298Z,1513226426.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:26.712Z,1513226426.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:26.748Z,1513226426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:27.094Z,1513226427.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:27.102Z,1513226427.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:27.133Z,1513226427.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:27.458Z,1513226427.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:27.515Z,1513226427.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:27.533Z,1513226427.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:27.855Z,1513226427.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:27.875Z,1513226427.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:28.258Z,1513226428.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:28.322Z,1513226428.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:28.331Z,1513226428.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:28.663Z,1513226428.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:28.678Z,1513226428.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:29.112Z,1513226429.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:29.126Z,1513226429.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:29.156Z,1513226429.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:29.465Z,1513226429.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:29.511Z,1513226429.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:29.529Z,1513226429.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:29.870Z,1513226429.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:29.923Z,1513226429.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:30.266Z,1513226430.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:30.319Z,1513226430.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:30.326Z,1513226430.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:30.664Z,1513226430.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:30.755Z,1513226430.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:31.052Z,1513226431.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:31.079Z,1513226431.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:31.122Z,1513226431.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:31.448Z,1513226431.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:31.495Z,1513226431.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:31.525Z,1513226431.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:31.851Z,1513226431.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:31.876Z,1513226431.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:32.270Z,1513226432.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:32.284Z,1513226432.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:32.322Z,1513226432.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:32.678Z,1513226432.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:32.789Z,1513226432.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:33.110Z,1513226433.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:33.117Z,1513226433.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:33.139Z,1513226433.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:33.447Z,1513226433.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:33.461Z,1513226433.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:33.521Z,1513226433.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:33.847Z,1513226433.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:33.879Z,1513226433.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:34.251Z,1513226434.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:34.277Z,1513226434.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:34.318Z,1513226434.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:34.648Z,1513226434.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:34.744Z,1513226434.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:35.052Z,1513226435.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:35.067Z,1513226435.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:35.114Z,1513226435.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:35.457Z,1513226435.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:35.473Z,1513226435.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:35.517Z,1513226435.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:35.869Z,1513226435.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:35.883Z,1513226435.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:36.258Z,1513226436.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:36.273Z,1513226436.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:36.314Z,1513226436.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:36.654Z,1513226436.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:36.739Z,1513226436.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:37.056Z,1513226437.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:37.082Z,1513226437.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:37.109Z,1513226437.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:37.453Z,1513226437.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:37.469Z,1513226437.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:37.514Z,1513226437.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:37.852Z,1513226437.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:37.871Z,1513226437.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:38.265Z,1513226438.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:38.297Z,1513226438.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:38.310Z,1513226438.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:38.670Z,1513226438.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:38.801Z,1513226438.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:39.065Z,1513226439.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:39.085Z,1513226439.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:39.106Z,1513226439.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:39.447Z,1513226439.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:39.474Z,1513226439.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:39.509Z,1513226439.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:39.859Z,1513226439.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:39.879Z,1513226439.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:40.247Z,1513226440.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:40.279Z,1513226440.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:40.306Z,1513226440.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:40.648Z,1513226440.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:40.681Z,1513226440.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:41.104Z,1513226441.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:41.128Z,1513226441.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:41.151Z,1513226441.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:41.476Z,1513226441.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:41.492Z,1513226441.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:41.509Z,1513226441.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:41.870Z,1513226441.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:41.891Z,1513226441.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:42.269Z,1513226442.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:42.284Z,1513226442.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:42.306Z,1513226442.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:42.647Z,1513226442.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:42.675Z,1513226442.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:43.102Z,1513226443.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:43.131Z,1513226443.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:43.182Z,1513226443.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:43.455Z,1513226443.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:43.485Z,1513226443.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:43.505Z,1513226443.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:43.851Z,1513226443.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:43.867Z,1513226443.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:44.265Z,1513226444.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:44.295Z,1513226444.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:44.302Z,1513226444.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:44.665Z,1513226444.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:44.818Z,1513226444.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:45.070Z,1513226445.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:45.084Z,1513226445.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:45.105Z,1513226445.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:45.458Z,1513226445.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:45.477Z,1513226445.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:45.509Z,1513226445.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:45.848Z,1513226445.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:45.884Z,1513226445.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:46.247Z,1513226446.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:46.283Z,1513226446.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:46.306Z,1513226446.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:46.647Z,1513226446.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:46.748Z,1513226446.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:47.051Z,1513226447.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:47.083Z,1513226447.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:47.101Z,1513226447.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:47.465Z,1513226447.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:47.501Z,1513226447.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:47.505Z,1513226447.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:47.876Z,1513226447.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:47.891Z,1513226447.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:48.269Z,1513226448.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:48.286Z,1513226448.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:48.302Z,1513226448.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:48.647Z,1513226448.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:48.727Z,1513226448.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:49.054Z,1513226449.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:49.079Z,1513226449.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:49.098Z,1513226449.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:49.479Z,1513226449.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:49.501Z,1513226449.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:49.503Z,1513226449.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:49.857Z,1513226449.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:49.872Z,1513226449.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:50.264Z,1513226450.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:50.298Z,1513226450.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:50.336Z,1513226450.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:50.680Z,1513226450.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:50.788Z,1513226450.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:51.069Z,1513226451.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:51.084Z,1513226451.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:51.094Z,1513226451.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:51.447Z,1513226451.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:51.497Z,1513226451.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:51.507Z,1513226451.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:51.846Z,1513226451.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:51.873Z,1513226451.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:52.252Z,1513226452.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:52.294Z,1513226452.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:52.318Z,1513226452.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:52.647Z,1513226452.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:52.675Z,1513226452.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:53.051Z,1513226453.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:53.071Z,1513226453.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:53.089Z,1513226453.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:53.465Z,1513226453.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:53.492Z,1513226453.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:53.493Z,1513226453.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:53.865Z,1513226453.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:53.879Z,1513226453.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:54.269Z,1513226454.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:54.290Z,1513226454.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:54.304Z,1513226454.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:54.655Z,1513226454.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:54.670Z,1513226454.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:55.091Z,1513226455.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:55.105Z,1513226455.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:55.128Z,1513226455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:55.454Z,1513226455.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:55.473Z,1513226455.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:55.497Z,1513226455.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:55.854Z,1513226455.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:55.914Z,1513226455.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:56.262Z,1513226456.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:56.283Z,1513226456.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:56.294Z,1513226456.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:56.661Z,1513226456.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:56.676Z,1513226456.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:57.090Z,1513226457.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:57.094Z,1513226457.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:57.137Z,1513226457.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:57.447Z,1513226457.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:57.475Z,1513226457.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:57.493Z,1513226457.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:57.844Z,1513226457.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:57.874Z,1513226457.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:58.247Z,1513226458.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:58.272Z,1513226458.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:58.290Z,1513226458.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:58.647Z,1513226458.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:58.754Z,1513226458.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:59.055Z,1513226459.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:59.086Z,1513226459.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:59.140Z,1513226459.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:59.469Z,1513226459.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:59.489Z,1513226459.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:59.496Z,1513226459.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:40:59.882Z,1513226459.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:40:59.903Z,1513226459.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:00.265Z,1513226460.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:00.286Z,1513226460.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:00.299Z,1513226460.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:00.658Z,1513226460.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:00.770Z,1513226460.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:01.057Z,1513226461.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:01.071Z,1513226461.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:01.081Z,1513226461.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:01.463Z,1513226461.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:01.478Z,1513226461.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:01.485Z,1513226461.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:01.855Z,1513226461.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:01.870Z,1513226461.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:02.282Z,1513226462.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:02.299Z,1513226462.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:02.331Z,1513226462.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:02.667Z,1513226462.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:02.748Z,1513226462.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:03.078Z,1513226463.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:03.089Z,1513226463.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:03.112Z,1513226463.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:03.481Z,1513226463.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:06.444Z,1513226466.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:06.484Z,1513226466.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:06.569Z,1513226466.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:06.584Z,1513226466.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:06.958Z,1513226466.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:06.982Z,1513226466.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:07.357Z,1513226467.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:07.387Z,1513226467.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:07.750Z,1513226467.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:07.782Z,1513226467.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:08.144Z,1513226468.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:08.159Z,1513226468.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:08.537Z,1513226468.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:08.553Z,1513226468.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:08.939Z,1513226468.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:08.959Z,1513226468.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:09.349Z,1513226469.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:09.365Z,1513226469.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:09.754Z,1513226469.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:09.775Z,1513226469.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:10.154Z,1513226470.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:10.171Z,1513226470.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:10.545Z,1513226470.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:10.567Z,1513226470.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:10.945Z,1513226470.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:10.959Z,1513226470.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:11.330Z,1513226471.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:11.368Z,1513226471.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:11.732Z,1513226471.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:11.768Z,1513226471.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:12.131Z,1513226472.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:12.167Z,1513226472.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:12.538Z,1513226472.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:12.737Z,1513226472.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:12.961Z,1513226472.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:12.975Z,1513226472.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:13.368Z,1513226473.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:13.383Z,1513226473.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:13.736Z,1513226473.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:13.783Z,1513226473.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:14.133Z,1513226474.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:14.148Z,1513226474.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:14.532Z,1513226474.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:14.575Z,1513226474.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:14.938Z,1513226474.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:14.967Z,1513226474.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:15.346Z,1513226475.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:15.417Z,1513226475.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:15.753Z,1513226475.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:15.784Z,1513226475.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:16.138Z,1513226476.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:16.152Z,1513226476.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:16.538Z,1513226476.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:16.567Z,1513226476.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:16.944Z,1513226476.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:16.958Z,1513226476.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:17.339Z,1513226477.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:17.366Z,1513226477.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:17.744Z,1513226477.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:17.802Z,1513226477.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:18.135Z,1513226478.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:18.149Z,1513226478.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:18.552Z,1513226478.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:18.591Z,1513226478.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:18.957Z,1513226478.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:18.980Z,1513226478.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:19.343Z,1513226479.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:19.394Z,1513226479.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:19.732Z,1513226479.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:19.768Z,1513226479.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:20.141Z,1513226480.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:20.186Z,1513226480.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:20.542Z,1513226480.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:20.556Z,1513226480.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:20.941Z,1513226480.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:20.956Z,1513226480.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:21.356Z,1513226481.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:21.387Z,1513226481.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:21.748Z,1513226481.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:21.788Z,1513226481.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:22.143Z,1513226482.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:22.163Z,1513226482.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:22.544Z,1513226482.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:22.572Z,1513226482.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:22.949Z,1513226482.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:23.060Z,1513226483.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:23.344Z,1513226483.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:23.379Z,1513226483.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:23.741Z,1513226483.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:23.786Z,1513226483.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:24.150Z,1513226484.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:24.186Z,1513226484.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:24.546Z,1513226484.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:24.586Z,1513226484.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:24.967Z,1513226484.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:25.064Z,1513226485.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:25.347Z,1513226485.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:25.391Z,1513226485.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:25.732Z,1513226485.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:25.759Z,1513226485.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:26.148Z,1513226486.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:26.187Z,1513226486.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:26.535Z,1513226486.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:26.575Z,1513226486.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:26.934Z,1513226486.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:26.982Z,1513226486.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:27.344Z,1513226487.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:27.364Z,1513226487.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:27.749Z,1513226487.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:27.797Z,1513226487.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:28.150Z,1513226488.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:28.165Z,1513226488.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:28.556Z,1513226488.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:28.612Z,1513226488.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:28.940Z,1513226488.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:28.998Z,1513226488.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:29.339Z,1513226489.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:29.387Z,1513226489.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:29.741Z,1513226489.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:29.756Z,1513226489.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:30.153Z,1513226490.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:30.186Z,1513226490.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:30.547Z,1513226490.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:30.583Z,1513226490.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:30.962Z,1513226490.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:30.989Z,1513226490.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:31.347Z,1513226491.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:31.362Z,1513226491.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:31.756Z,1513226491.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:31.771Z,1513226491.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:32.132Z,1513226492.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:32.176Z,1513226492.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:32.533Z,1513226492.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:32.572Z,1513226492.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:32.933Z,1513226492.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:32.972Z,1513226492.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:33.367Z,1513226493.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:33.408Z,1513226493.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:33.772Z,1513226493.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:33.829Z,1513226493.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:34.160Z,1513226494.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:34.184Z,1513226494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:34.533Z,1513226494.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:34.569Z,1513226494.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:34.946Z,1513226494.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:35.041Z,1513226495.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:35.343Z,1513226495.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:35.459Z,1513226495.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:35.741Z,1513226495.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:35.799Z,1513226495.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:36.155Z,1513226496.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:36.223Z,1513226496.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:36.544Z,1513226496.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:36.578Z,1513226496.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:36.948Z,1513226496.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:37.070Z,1513226497.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:37.379Z,1513226497.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:37.399Z,1513226497.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:37.738Z,1513226497.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:37.786Z,1513226497.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:38.150Z,1513226498.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:38.191Z,1513226498.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:38.583Z,1513226498.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:38.650Z,1513226498.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:38.940Z,1513226498.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:38.959Z,1513226498.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:39.352Z,1513226499.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:39.386Z,1513226499.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:39.768Z,1513226499.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:39.798Z,1513226499.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:40.149Z,1513226500.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:40.191Z,1513226500.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:40.532Z,1513226500.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:40.579Z,1513226500.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:40.931Z,1513226500.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:40.963Z,1513226500.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:41.331Z,1513226501.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:41.366Z,1513226501.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:41.732Z,1513226501.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:41.763Z,1513226501.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:42.131Z,1513226502.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:42.147Z,1513226502.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:42.542Z,1513226502.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:42.571Z,1513226502.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:42.958Z,1513226502.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:42.976Z,1513226502.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:43.367Z,1513226503.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:43.386Z,1513226503.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:43.731Z,1513226503.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:43.758Z,1513226503.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:44.138Z,1513226504.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:44.153Z,1513226504.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:44.542Z,1513226504.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:44.557Z,1513226504.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:44.972Z,1513226504.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:44.991Z,1513226504.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:45.341Z,1513226505.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:45.391Z,1513226505.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:45.754Z,1513226505.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:45.785Z,1513226505.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:46.145Z,1513226506.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:46.161Z,1513226506.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:46.540Z,1513226506.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:46.555Z,1513226506.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:46.937Z,1513226506.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:46.959Z,1513226506.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:47.338Z,1513226507.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:47.353Z,1513226507.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:47.741Z,1513226507.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:47.756Z,1513226507.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:48.168Z,1513226508.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:48.214Z,1513226508.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:48.549Z,1513226508.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:48.585Z,1513226508.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:48.953Z,1513226508.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:48.986Z,1513226508.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:49.350Z,1513226509.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:49.377Z,1513226509.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:49.740Z,1513226509.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:49.759Z,1513226509.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:50.139Z,1513226510.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:50.154Z,1513226510.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:50.542Z,1513226510.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:50.556Z,1513226510.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:50.939Z,1513226510.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:50.954Z,1513226510.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:51.360Z,1513226511.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:51.387Z,1513226511.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:51.758Z,1513226511.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:51.779Z,1513226511.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:52.144Z,1513226512.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:52.159Z,1513226512.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:52.531Z,1513226512.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:52.568Z,1513226512.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:52.946Z,1513226512.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:52.960Z,1513226512.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:53.332Z,1513226513.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:53.367Z,1513226513.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:53.731Z,1513226513.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:53.771Z,1513226513.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:54.131Z,1513226514.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:54.163Z,1513226514.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:54.514Z,1513226514.514 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T04:41:54.515Z,1513226514.515 [NAL9602] Data Fault, FailCount= 3
2017-12-14T04:41:54.515Z,1513226514.515 [NAL9602](ERROR): Data Fault
2017-12-14T04:41:54.532Z,1513226514.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:54.591Z,1513226514.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:54.642Z,1513226514.642 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T04:41:54.914Z,1513226514.914 [NAL9602](INFO): Powering down
2017-12-14T04:41:54.931Z,1513226514.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:54.983Z,1513226514.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:55.337Z,1513226515.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:55.352Z,1513226515.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:55.739Z,1513226515.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:55.779Z,1513226515.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:55.817Z,1513226515.817 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T04:41:55.817Z,1513226515.817 [NAL9602] No Fault, FailCount= 3
2017-12-14T04:41:56.130Z,1513226516.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:56.164Z,1513226516.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:56.535Z,1513226516.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:56.560Z,1513226516.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:56.931Z,1513226516.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:56.984Z,1513226516.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:57.330Z,1513226517.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:57.395Z,1513226517.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:57.735Z,1513226517.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:57.761Z,1513226517.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:58.135Z,1513226518.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:58.151Z,1513226518.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:58.538Z,1513226518.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:58.578Z,1513226518.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:58.937Z,1513226518.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:58.952Z,1513226518.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:59.338Z,1513226519.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:59.391Z,1513226519.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:41:59.738Z,1513226519.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:41:59.752Z,1513226519.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:00.137Z,1513226520.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:00.151Z,1513226520.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:00.538Z,1513226520.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:00.554Z,1513226520.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:01.000Z,1513226521.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:01.050Z,1513226521.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:01.375Z,1513226521.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:01.391Z,1513226521.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:01.736Z,1513226521.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:01.750Z,1513226521.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:02.136Z,1513226522.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:02.150Z,1513226522.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:02.537Z,1513226522.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:02.564Z,1513226522.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:02.938Z,1513226522.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:02.954Z,1513226522.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:03.340Z,1513226523.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:03.355Z,1513226523.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:06.981Z,1513226526.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:06.996Z,1513226526.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:07.149Z,1513226527.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:07.191Z,1513226527.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:07.534Z,1513226527.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:07.595Z,1513226527.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:07.938Z,1513226527.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:07.953Z,1513226527.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:08.340Z,1513226528.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:08.355Z,1513226528.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:08.765Z,1513226528.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:08.801Z,1513226528.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:09.140Z,1513226529.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:09.163Z,1513226529.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:09.610Z,1513226529.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:09.624Z,1513226529.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:09.938Z,1513226529.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:09.960Z,1513226529.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:10.326Z,1513226530.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:10.351Z,1513226530.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:10.773Z,1513226530.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:10.807Z,1513226530.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:11.135Z,1513226531.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:11.163Z,1513226531.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:11.527Z,1513226531.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:11.564Z,1513226531.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:11.924Z,1513226531.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:11.939Z,1513226531.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:12.327Z,1513226532.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:12.371Z,1513226532.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:12.762Z,1513226532.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:12.788Z,1513226532.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:13.136Z,1513226533.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:13.163Z,1513226533.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:13.554Z,1513226533.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:13.580Z,1513226533.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:13.935Z,1513226533.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:13.950Z,1513226533.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:14.330Z,1513226534.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:14.346Z,1513226534.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:14.758Z,1513226534.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:14.797Z,1513226534.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:15.127Z,1513226535.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:15.162Z,1513226535.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:15.541Z,1513226535.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:15.556Z,1513226535.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:15.927Z,1513226535.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:15.965Z,1513226535.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:16.326Z,1513226536.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:16.360Z,1513226536.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:16.820Z,1513226536.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:16.868Z,1513226536.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:17.127Z,1513226537.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:17.163Z,1513226537.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:17.528Z,1513226537.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:17.566Z,1513226537.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:17.931Z,1513226537.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:17.962Z,1513226537.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:18.331Z,1513226538.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:18.364Z,1513226538.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:18.730Z,1513226538.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:18.767Z,1513226538.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:18.767Z,1513226538.767 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2017-12-14T04:42:18.767Z,1513226538.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:42:18.769Z,1513226538.769 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:18.769Z,1513226538.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2017-12-14T04:42:18.770Z,1513226538.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:42:18.774Z,1513226538.774 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:18.774Z,1513226538.774 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2017-12-14T04:42:18.774Z,1513226538.774 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:42:18.796Z,1513226538.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:42:18.803Z,1513226538.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:42:18.804Z,1513226538.804 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:42:19.143Z,1513226539.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:19.217Z,1513226539.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:42:19.217Z,1513226539.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2017-12-14T04:42:19.218Z,1513226539.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:42:19.218Z,1513226539.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2017-12-14T04:42:19.218Z,1513226539.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:42:19.218Z,1513226539.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2017-12-14T04:42:19.530Z,1513226539.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:19.562Z,1513226539.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:42:19.562Z,1513226539.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:42:19.563Z,1513226539.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:42:19.563Z,1513226539.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:42:19.563Z,1513226539.563 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:42:19.564Z,1513226539.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:42:19.564Z,1513226539.564 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:42:19.564Z,1513226539.564 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:42:19.569Z,1513226539.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:42:19.937Z,1513226539.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:19.988Z,1513226539.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:20.335Z,1513226540.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:20.367Z,1513226540.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:20.762Z,1513226540.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:20.777Z,1513226540.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:21.135Z,1513226541.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:21.186Z,1513226541.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:21.559Z,1513226541.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:21.579Z,1513226541.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:21.933Z,1513226541.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:21.991Z,1513226541.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:22.334Z,1513226542.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:22.349Z,1513226542.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:22.766Z,1513226542.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:22.788Z,1513226542.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:23.144Z,1513226543.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:23.199Z,1513226543.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:23.535Z,1513226543.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:23.566Z,1513226543.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:23.922Z,1513226543.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:23.954Z,1513226543.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:24.339Z,1513226544.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:24.359Z,1513226544.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:24.776Z,1513226544.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:24.793Z,1513226544.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:25.111Z,1513226545.111 [NAL9602](INFO): Powering up NAL9602
2017-12-14T04:42:25.136Z,1513226545.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:25.159Z,1513226545.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:25.540Z,1513226545.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:25.556Z,1513226545.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:25.937Z,1513226545.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:25.951Z,1513226545.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:26.372Z,1513226546.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:26.407Z,1513226546.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:26.762Z,1513226546.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:26.803Z,1513226546.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:27.133Z,1513226547.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:27.156Z,1513226547.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:27.541Z,1513226547.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:27.557Z,1513226547.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:27.927Z,1513226547.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:27.964Z,1513226547.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:28.324Z,1513226548.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:28.351Z,1513226548.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:28.757Z,1513226548.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:28.780Z,1513226548.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:29.131Z,1513226549.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:29.167Z,1513226549.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:29.565Z,1513226549.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:29.626Z,1513226549.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:29.921Z,1513226549.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:29.940Z,1513226549.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:30.333Z,1513226550.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:30.390Z,1513226550.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:30.794Z,1513226550.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:30.824Z,1513226550.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:31.130Z,1513226551.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:31.156Z,1513226551.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:31.524Z,1513226551.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:31.551Z,1513226551.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:31.936Z,1513226551.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:31.951Z,1513226551.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:32.339Z,1513226552.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:32.355Z,1513226552.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:32.746Z,1513226552.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:32.768Z,1513226552.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:33.127Z,1513226553.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:33.152Z,1513226553.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:33.526Z,1513226553.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:33.564Z,1513226553.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:33.939Z,1513226553.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:33.954Z,1513226553.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:34.340Z,1513226554.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:34.355Z,1513226554.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:34.724Z,1513226554.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:34.756Z,1513226554.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:35.127Z,1513226555.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:35.152Z,1513226555.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:35.527Z,1513226555.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:35.551Z,1513226555.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:35.969Z,1513226555.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:36.009Z,1513226556.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:36.317Z,1513226556.317 [NAL9602](INFO): NAL9602 initialized
2017-12-14T04:42:36.348Z,1513226556.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:36.363Z,1513226556.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:36.758Z,1513226556.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:36.791Z,1513226556.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:37.147Z,1513226557.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:37.162Z,1513226557.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:37.544Z,1513226557.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:37.560Z,1513226557.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:37.946Z,1513226557.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:37.961Z,1513226557.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:38.341Z,1513226558.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:38.363Z,1513226558.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:38.779Z,1513226558.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:38.795Z,1513226558.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:39.132Z,1513226559.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:39.179Z,1513226559.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:39.552Z,1513226559.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:39.567Z,1513226559.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:39.949Z,1513226559.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:39.971Z,1513226559.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:40.346Z,1513226560.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:40.361Z,1513226560.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:40.776Z,1513226560.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:40.808Z,1513226560.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:41.128Z,1513226561.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:41.160Z,1513226561.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:41.528Z,1513226561.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:41.555Z,1513226561.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:41.936Z,1513226561.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:41.953Z,1513226561.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:42.362Z,1513226562.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:42.443Z,1513226562.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:42.756Z,1513226562.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:42.804Z,1513226562.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:43.151Z,1513226563.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:43.202Z,1513226563.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:43.550Z,1513226563.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:43.566Z,1513226563.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:43.927Z,1513226563.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:43.991Z,1513226563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:44.340Z,1513226564.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:44.356Z,1513226564.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:44.766Z,1513226564.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:44.816Z,1513226564.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:45.131Z,1513226565.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:45.167Z,1513226565.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:45.541Z,1513226565.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:45.568Z,1513226565.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:45.943Z,1513226565.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:45.966Z,1513226565.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:46.361Z,1513226566.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:46.375Z,1513226566.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:46.728Z,1513226566.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:46.744Z,1513226566.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:47.139Z,1513226567.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:47.172Z,1513226567.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:47.535Z,1513226567.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:47.573Z,1513226567.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:47.928Z,1513226567.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:47.942Z,1513226567.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:48.328Z,1513226568.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:48.343Z,1513226568.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:48.746Z,1513226568.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:48.821Z,1513226568.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:49.147Z,1513226569.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:49.177Z,1513226569.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:49.546Z,1513226569.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:49.577Z,1513226569.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:49.934Z,1513226569.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:49.953Z,1513226569.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:50.337Z,1513226570.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:50.352Z,1513226570.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:50.790Z,1513226570.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:50.821Z,1513226570.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:51.131Z,1513226571.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:51.151Z,1513226571.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:51.550Z,1513226571.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:51.565Z,1513226571.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:51.968Z,1513226571.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:52.043Z,1513226572.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:52.346Z,1513226572.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:52.363Z,1513226572.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:52.767Z,1513226572.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:52.799Z,1513226572.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:53.130Z,1513226573.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:53.158Z,1513226573.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:53.528Z,1513226573.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:53.555Z,1513226573.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:53.932Z,1513226573.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:53.967Z,1513226573.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:54.331Z,1513226574.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:54.364Z,1513226574.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:54.785Z,1513226574.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:54.806Z,1513226574.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:55.180Z,1513226575.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:55.208Z,1513226575.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:55.552Z,1513226575.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:55.567Z,1513226575.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:55.934Z,1513226575.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:55.969Z,1513226575.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:56.331Z,1513226576.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:56.366Z,1513226576.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:56.784Z,1513226576.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:56.807Z,1513226576.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:57.134Z,1513226577.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:57.154Z,1513226577.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:57.546Z,1513226577.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:57.561Z,1513226577.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:57.942Z,1513226577.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:57.963Z,1513226577.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:58.364Z,1513226578.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:58.393Z,1513226578.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:58.807Z,1513226578.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:58.861Z,1513226578.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:59.139Z,1513226579.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:59.155Z,1513226579.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:59.540Z,1513226579.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:59.556Z,1513226579.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:42:59.939Z,1513226579.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:42:59.954Z,1513226579.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:00.340Z,1513226580.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:00.356Z,1513226580.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:00.743Z,1513226580.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:00.759Z,1513226580.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:01.141Z,1513226581.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:01.164Z,1513226581.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:01.569Z,1513226581.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:01.592Z,1513226581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:01.927Z,1513226581.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:01.960Z,1513226581.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:02.328Z,1513226582.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:02.356Z,1513226582.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:02.363Z,1513226582.363 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:43:02.363Z,1513226582.363 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:43:02.363Z,1513226582.363 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:43:02.363Z,1513226582.363 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:43:02.733Z,1513226582.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:02.771Z,1513226582.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:02.775Z,1513226582.775 [Default:CheckIn:D] Stopped
2017-12-14T04:43:02.775Z,1513226582.775 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:43:03.139Z,1513226583.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:03.168Z,1513226583.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:03.172Z,1513226583.172 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 249.789746 min 
2017-12-14T04:43:03.172Z,1513226583.172 [Default:CheckIn:E] Stopped
2017-12-14T04:43:03.172Z,1513226583.172 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn] Stopped
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn](INFO): Running loop #25
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn] Running Loop=25
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:43:03.173Z,1513226583.173 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:43:03.552Z,1513226583.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:03.568Z,1513226583.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:07.114Z,1513226587.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:07.191Z,1513226587.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:07.310Z,1513226587.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:07.325Z,1513226587.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:07.659Z,1513226587.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:07.689Z,1513226587.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:08.075Z,1513226588.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:08.131Z,1513226588.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:08.474Z,1513226588.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:08.489Z,1513226588.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:08.868Z,1513226588.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:08.916Z,1513226588.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:09.268Z,1513226589.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:09.292Z,1513226589.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:09.681Z,1513226589.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:09.696Z,1513226589.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:10.082Z,1513226590.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:10.096Z,1513226590.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:10.481Z,1513226590.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:10.503Z,1513226590.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:10.855Z,1513226590.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:10.899Z,1513226590.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:11.261Z,1513226591.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:11.326Z,1513226591.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:11.664Z,1513226591.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:11.691Z,1513226591.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:12.092Z,1513226592.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:12.108Z,1513226592.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:12.488Z,1513226592.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:12.503Z,1513226592.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:12.883Z,1513226592.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:12.903Z,1513226592.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:13.270Z,1513226593.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:13.302Z,1513226593.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:13.660Z,1513226593.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:13.688Z,1513226593.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:14.052Z,1513226594.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:14.095Z,1513226594.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:14.458Z,1513226594.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:14.488Z,1513226594.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:14.861Z,1513226594.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:14.888Z,1513226594.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:15.264Z,1513226595.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:15.295Z,1513226595.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:15.674Z,1513226595.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:15.701Z,1513226595.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:16.087Z,1513226596.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:16.101Z,1513226596.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:16.481Z,1513226596.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:16.504Z,1513226596.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:16.872Z,1513226596.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:16.892Z,1513226596.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:17.289Z,1513226597.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:17.341Z,1513226597.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:17.664Z,1513226597.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:17.689Z,1513226597.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:18.071Z,1513226598.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:18.088Z,1513226598.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:18.470Z,1513226598.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:18.485Z,1513226598.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:18.873Z,1513226598.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:18.889Z,1513226598.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:19.277Z,1513226599.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:19.292Z,1513226599.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:19.665Z,1513226599.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:19.702Z,1513226599.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:20.066Z,1513226600.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:20.083Z,1513226600.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:20.472Z,1513226600.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:20.489Z,1513226600.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:20.871Z,1513226600.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:20.891Z,1513226600.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:21.263Z,1513226601.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:21.291Z,1513226601.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:21.677Z,1513226601.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:21.692Z,1513226601.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:22.083Z,1513226602.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:22.103Z,1513226602.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:22.480Z,1513226602.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:22.508Z,1513226602.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:22.860Z,1513226602.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:22.892Z,1513226602.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:23.271Z,1513226603.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:23.294Z,1513226603.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:23.664Z,1513226603.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:23.692Z,1513226603.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:24.092Z,1513226604.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:24.107Z,1513226604.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:24.483Z,1513226604.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:24.498Z,1513226604.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:24.894Z,1513226604.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:24.915Z,1513226604.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:25.280Z,1513226605.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:25.295Z,1513226605.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:25.667Z,1513226605.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:25.690Z,1513226605.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:26.067Z,1513226606.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:26.090Z,1513226606.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:26.467Z,1513226606.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:26.491Z,1513226606.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:26.930Z,1513226606.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:26.953Z,1513226606.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:27.264Z,1513226607.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:27.298Z,1513226607.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:27.684Z,1513226607.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:27.699Z,1513226607.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:28.086Z,1513226608.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:28.107Z,1513226608.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:28.473Z,1513226608.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:28.503Z,1513226608.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:28.895Z,1513226608.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:28.903Z,1513226608.903 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T04:43:28.903Z,1513226608.903 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:43:28.903Z,1513226608.903 [BPC1](ERROR): Data Fault
2017-12-14T04:43:28.919Z,1513226608.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:28.965Z,1513226608.965 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:43:29.259Z,1513226609.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:29.279Z,1513226609.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:29.660Z,1513226609.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:29.675Z,1513226609.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:30.055Z,1513226610.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:30.120Z,1513226610.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:30.170Z,1513226610.170 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:43:30.170Z,1513226610.170 [BPC1] No Fault, FailCount= 1
2017-12-14T04:43:30.486Z,1513226610.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:30.552Z,1513226610.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:30.880Z,1513226610.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:30.895Z,1513226610.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:31.286Z,1513226611.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:31.303Z,1513226611.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:31.659Z,1513226611.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:31.702Z,1513226611.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:32.055Z,1513226612.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:32.086Z,1513226612.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:32.460Z,1513226612.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:32.491Z,1513226612.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:32.861Z,1513226612.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:32.892Z,1513226612.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:33.282Z,1513226613.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:33.309Z,1513226613.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:33.669Z,1513226613.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:33.693Z,1513226613.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:34.087Z,1513226614.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:34.102Z,1513226614.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:34.474Z,1513226614.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:34.503Z,1513226614.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:34.859Z,1513226614.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:34.900Z,1513226614.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:35.260Z,1513226615.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:35.303Z,1513226615.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:35.665Z,1513226615.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:35.702Z,1513226615.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:36.060Z,1513226616.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:36.075Z,1513226616.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:36.504Z,1513226616.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:36.546Z,1513226616.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:36.867Z,1513226616.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:36.889Z,1513226616.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:37.281Z,1513226617.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:37.311Z,1513226617.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:37.667Z,1513226617.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:37.681Z,1513226617.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:38.057Z,1513226618.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:38.101Z,1513226618.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:38.464Z,1513226618.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:38.470Z,1513226618.470 [PNI_TCM](ERROR): CRC does not match. Expected:0x33993 got:0x55835
2017-12-14T04:43:38.494Z,1513226618.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:38.867Z,1513226618.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:38.908Z,1513226618.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:39.267Z,1513226619.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:39.291Z,1513226619.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:39.689Z,1513226619.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:39.720Z,1513226619.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:40.097Z,1513226620.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:40.111Z,1513226620.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:40.479Z,1513226620.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:40.505Z,1513226620.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:40.863Z,1513226620.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:40.912Z,1513226620.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:41.260Z,1513226621.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:41.295Z,1513226621.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:41.669Z,1513226621.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:41.684Z,1513226621.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:42.070Z,1513226622.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:42.092Z,1513226622.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:42.470Z,1513226622.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:42.485Z,1513226622.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:42.875Z,1513226622.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:42.895Z,1513226622.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:43.303Z,1513226623.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:43.331Z,1513226623.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:43.668Z,1513226623.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:43.683Z,1513226623.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:44.066Z,1513226624.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:44.089Z,1513226624.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:44.459Z,1513226624.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:44.503Z,1513226624.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:44.876Z,1513226624.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:44.890Z,1513226624.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:45.259Z,1513226625.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:45.291Z,1513226625.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:45.678Z,1513226625.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:45.693Z,1513226625.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:46.079Z,1513226626.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:46.103Z,1513226626.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:46.479Z,1513226626.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:46.494Z,1513226626.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:46.879Z,1513226626.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:46.894Z,1513226626.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:47.261Z,1513226627.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:47.300Z,1513226627.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:47.656Z,1513226627.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:47.695Z,1513226627.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:48.063Z,1513226628.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:48.080Z,1513226628.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T04:43:48.107Z,1513226628.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:48.482Z,1513226628.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:48.496Z,1513226628.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:48.882Z,1513226628.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:48.896Z,1513226628.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:49.297Z,1513226629.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:49.328Z,1513226629.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:49.669Z,1513226629.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:49.683Z,1513226629.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:50.072Z,1513226630.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:50.099Z,1513226630.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:50.469Z,1513226630.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:50.488Z,1513226630.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:50.869Z,1513226630.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:50.961Z,1513226630.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:51.266Z,1513226631.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:51.293Z,1513226631.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:51.680Z,1513226631.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:51.731Z,1513226631.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:52.075Z,1513226632.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:52.089Z,1513226632.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:52.497Z,1513226632.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:52.563Z,1513226632.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:52.870Z,1513226632.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:52.890Z,1513226632.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:53.264Z,1513226633.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:53.287Z,1513226633.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:53.674Z,1513226633.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:53.689Z,1513226633.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:54.071Z,1513226634.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:54.087Z,1513226634.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:54.485Z,1513226634.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:54.499Z,1513226634.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:54.879Z,1513226634.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:54.894Z,1513226634.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:55.276Z,1513226635.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:55.293Z,1513226635.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:55.670Z,1513226635.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:55.686Z,1513226635.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:56.065Z,1513226636.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:56.097Z,1513226636.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:56.475Z,1513226636.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:56.490Z,1513226636.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:56.874Z,1513226636.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:56.899Z,1513226636.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:57.255Z,1513226637.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:57.291Z,1513226637.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:57.682Z,1513226637.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:57.698Z,1513226637.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:58.078Z,1513226638.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:58.093Z,1513226638.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:58.478Z,1513226638.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:58.494Z,1513226638.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:58.905Z,1513226638.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:58.941Z,1513226638.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:59.265Z,1513226639.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:59.284Z,1513226639.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:43:59.669Z,1513226639.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:43:59.684Z,1513226639.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:00.068Z,1513226640.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:00.082Z,1513226640.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:00.483Z,1513226640.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:00.498Z,1513226640.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:00.885Z,1513226640.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:00.939Z,1513226640.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:01.282Z,1513226641.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:01.297Z,1513226641.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:01.674Z,1513226641.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:01.688Z,1513226641.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:02.060Z,1513226642.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:02.083Z,1513226642.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:02.478Z,1513226642.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:02.499Z,1513226642.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:02.860Z,1513226642.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:02.895Z,1513226642.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:03.261Z,1513226643.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:03.297Z,1513226643.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:03.686Z,1513226643.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:03.701Z,1513226643.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:07.327Z,1513226647.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:07.359Z,1513226647.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:07.478Z,1513226647.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:07.511Z,1513226647.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:07.846Z,1513226647.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:07.861Z,1513226647.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:08.246Z,1513226648.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:08.262Z,1513226648.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:08.645Z,1513226648.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:08.661Z,1513226648.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:09.040Z,1513226649.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:09.058Z,1513226649.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:09.447Z,1513226649.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:09.463Z,1513226649.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:09.850Z,1513226649.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:09.864Z,1513226649.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:10.247Z,1513226650.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:10.263Z,1513226650.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:10.646Z,1513226650.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:10.661Z,1513226650.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:11.103Z,1513226651.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:11.138Z,1513226651.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:11.436Z,1513226651.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:11.474Z,1513226651.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:11.840Z,1513226651.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:11.859Z,1513226651.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:12.241Z,1513226652.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:12.257Z,1513226652.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:12.654Z,1513226652.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:12.686Z,1513226652.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:13.103Z,1513226653.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:13.171Z,1513226653.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:13.455Z,1513226653.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:13.478Z,1513226653.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:13.836Z,1513226653.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:13.863Z,1513226653.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:14.244Z,1513226654.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:14.286Z,1513226654.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:14.645Z,1513226654.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:14.660Z,1513226654.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:15.046Z,1513226655.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:15.107Z,1513226655.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:15.455Z,1513226655.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:15.470Z,1513226655.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:15.847Z,1513226655.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:15.867Z,1513226655.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:16.254Z,1513226656.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:16.270Z,1513226656.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:16.631Z,1513226656.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:16.716Z,1513226656.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:17.031Z,1513226657.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:17.051Z,1513226657.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:17.439Z,1513226657.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:17.475Z,1513226657.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:17.841Z,1513226657.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:17.855Z,1513226657.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:18.231Z,1513226658.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:18.259Z,1513226658.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:18.650Z,1513226658.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:18.699Z,1513226658.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:19.049Z,1513226659.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:19.095Z,1513226659.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:19.450Z,1513226659.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:19.480Z,1513226659.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:19.843Z,1513226659.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:19.858Z,1513226659.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:20.241Z,1513226660.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:20.255Z,1513226660.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:20.636Z,1513226660.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:20.652Z,1513226660.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:21.076Z,1513226661.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:21.115Z,1513226661.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:21.453Z,1513226661.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:21.471Z,1513226661.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:21.846Z,1513226661.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:21.861Z,1513226661.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:22.254Z,1513226662.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:22.272Z,1513226662.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:22.646Z,1513226662.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:22.660Z,1513226662.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:23.039Z,1513226663.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:23.059Z,1513226663.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:23.439Z,1513226663.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:23.494Z,1513226663.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:23.888Z,1513226663.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:23.968Z,1513226663.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:24.271Z,1513226664.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:24.299Z,1513226664.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:24.652Z,1513226664.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:24.667Z,1513226664.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:25.107Z,1513226665.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:25.139Z,1513226665.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:25.454Z,1513226665.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:25.475Z,1513226665.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:25.835Z,1513226665.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:25.861Z,1513226665.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:26.231Z,1513226666.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:26.257Z,1513226666.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:26.648Z,1513226666.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:26.667Z,1513226666.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:27.096Z,1513226667.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:27.127Z,1513226667.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:27.495Z,1513226667.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:27.551Z,1513226667.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:27.842Z,1513226667.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:27.874Z,1513226667.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:28.250Z,1513226668.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:28.273Z,1513226668.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:28.639Z,1513226668.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:28.705Z,1513226668.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:29.032Z,1513226669.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:29.071Z,1513226669.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:29.443Z,1513226669.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:29.467Z,1513226669.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:29.832Z,1513226669.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:29.858Z,1513226669.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:30.231Z,1513226670.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:30.264Z,1513226670.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:30.710Z,1513226670.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:30.767Z,1513226670.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:31.072Z,1513226671.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:31.087Z,1513226671.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:31.442Z,1513226671.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:31.474Z,1513226671.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:31.839Z,1513226671.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:31.856Z,1513226671.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:32.235Z,1513226672.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:32.271Z,1513226672.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:32.636Z,1513226672.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:32.691Z,1513226672.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:33.035Z,1513226673.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:33.057Z,1513226673.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:33.450Z,1513226673.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:33.465Z,1513226673.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:33.850Z,1513226673.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:34.015Z,1513226674.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:34.251Z,1513226674.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:34.266Z,1513226674.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:34.631Z,1513226674.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:34.657Z,1513226674.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:35.037Z,1513226675.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:35.070Z,1513226675.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:35.435Z,1513226675.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:35.475Z,1513226675.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:35.840Z,1513226675.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:35.898Z,1513226675.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:36.233Z,1513226676.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:36.248Z,1513226676.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:36.651Z,1513226676.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:36.707Z,1513226676.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:37.049Z,1513226677.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:37.067Z,1513226677.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:37.448Z,1513226677.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:37.502Z,1513226677.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:37.840Z,1513226677.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:37.859Z,1513226677.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:38.242Z,1513226678.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:38.256Z,1513226678.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:38.646Z,1513226678.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:38.661Z,1513226678.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:39.098Z,1513226679.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:39.136Z,1513226679.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:39.455Z,1513226679.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:39.470Z,1513226679.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:39.840Z,1513226679.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:39.866Z,1513226679.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:40.241Z,1513226680.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:40.339Z,1513226680.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:40.641Z,1513226680.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:40.655Z,1513226680.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:41.097Z,1513226681.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:41.141Z,1513226681.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:41.434Z,1513226681.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:41.456Z,1513226681.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:41.831Z,1513226681.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:41.867Z,1513226681.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:42.225Z,1513226682.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:42.240Z,1513226682.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:42.641Z,1513226682.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:42.735Z,1513226682.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:43.049Z,1513226683.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:43.075Z,1513226683.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:43.442Z,1513226683.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:43.515Z,1513226683.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:43.836Z,1513226683.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:43.867Z,1513226683.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:44.243Z,1513226684.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:44.259Z,1513226684.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:44.644Z,1513226684.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:44.659Z,1513226684.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:45.031Z,1513226685.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:45.063Z,1513226685.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:45.460Z,1513226685.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:45.474Z,1513226685.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:45.839Z,1513226685.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:45.900Z,1513226685.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:46.252Z,1513226686.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:46.274Z,1513226686.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:46.737Z,1513226686.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:46.772Z,1513226686.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:47.032Z,1513226687.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:47.051Z,1513226687.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:47.433Z,1513226687.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:47.455Z,1513226687.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:47.860Z,1513226687.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:47.895Z,1513226687.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:48.232Z,1513226688.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:48.267Z,1513226688.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:48.657Z,1513226688.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:48.736Z,1513226688.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:49.050Z,1513226689.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:49.076Z,1513226689.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:49.451Z,1513226689.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:49.475Z,1513226689.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:49.837Z,1513226689.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:49.853Z,1513226689.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:50.239Z,1513226690.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:50.259Z,1513226690.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:50.637Z,1513226690.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:50.652Z,1513226690.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:51.039Z,1513226691.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:51.107Z,1513226691.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:51.448Z,1513226691.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:51.464Z,1513226691.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:51.842Z,1513226691.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:51.856Z,1513226691.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:52.245Z,1513226692.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:52.259Z,1513226692.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:52.641Z,1513226692.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:52.655Z,1513226692.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:53.100Z,1513226693.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:53.135Z,1513226693.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:53.439Z,1513226693.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:53.472Z,1513226693.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:53.838Z,1513226693.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:53.852Z,1513226693.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:54.239Z,1513226694.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:54.259Z,1513226694.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:54.653Z,1513226694.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:54.682Z,1513226694.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:55.112Z,1513226695.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:55.132Z,1513226695.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:55.450Z,1513226695.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:55.471Z,1513226695.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:55.831Z,1513226695.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:55.857Z,1513226695.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:56.235Z,1513226696.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:56.267Z,1513226696.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:56.632Z,1513226696.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:56.809Z,1513226696.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:57.083Z,1513226697.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:57.119Z,1513226697.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:57.450Z,1513226697.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:57.475Z,1513226697.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:57.857Z,1513226697.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:57.912Z,1513226697.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:58.241Z,1513226698.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:58.271Z,1513226698.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:58.635Z,1513226698.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:58.740Z,1513226698.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:59.072Z,1513226699.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:59.111Z,1513226699.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:59.431Z,1513226699.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:59.458Z,1513226699.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:44:59.836Z,1513226699.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:44:59.874Z,1513226699.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:00.225Z,1513226700.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:00.286Z,1513226700.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:00.653Z,1513226700.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:00.735Z,1513226700.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:01.054Z,1513226701.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:01.068Z,1513226701.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:01.450Z,1513226701.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:01.466Z,1513226701.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:01.842Z,1513226701.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:01.858Z,1513226701.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:02.244Z,1513226702.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:02.263Z,1513226702.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:02.632Z,1513226702.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:02.662Z,1513226702.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:03.034Z,1513226703.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:03.068Z,1513226703.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:03.476Z,1513226703.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:03.491Z,1513226703.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:03.846Z,1513226703.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:03.871Z,1513226703.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:07.346Z,1513226707.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:07.393Z,1513226707.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:07.491Z,1513226707.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:07.520Z,1513226707.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:07.872Z,1513226707.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:07.886Z,1513226707.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:08.272Z,1513226708.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:08.298Z,1513226708.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:08.674Z,1513226708.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:08.688Z,1513226708.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:09.098Z,1513226709.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:09.139Z,1513226709.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:09.483Z,1513226709.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:09.512Z,1513226709.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:09.889Z,1513226709.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:09.911Z,1513226709.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:10.286Z,1513226710.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:10.300Z,1513226710.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:10.701Z,1513226710.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:10.768Z,1513226710.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:11.073Z,1513226711.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:11.088Z,1513226711.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:11.469Z,1513226711.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:11.496Z,1513226711.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:11.877Z,1513226711.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:11.892Z,1513226711.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:12.275Z,1513226712.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:12.296Z,1513226712.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:12.723Z,1513226712.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:12.767Z,1513226712.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:13.100Z,1513226713.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:13.139Z,1513226713.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:13.491Z,1513226713.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:13.511Z,1513226713.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:13.868Z,1513226713.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:13.899Z,1513226713.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:14.263Z,1513226714.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:14.287Z,1513226714.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:14.696Z,1513226714.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:14.774Z,1513226714.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:15.079Z,1513226715.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:15.121Z,1513226715.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:15.482Z,1513226715.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:15.508Z,1513226715.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:15.889Z,1513226715.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:15.919Z,1513226715.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:16.309Z,1513226716.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:16.331Z,1513226716.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:16.710Z,1513226716.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:16.777Z,1513226716.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:17.071Z,1513226717.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:17.088Z,1513226717.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:17.472Z,1513226717.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:17.487Z,1513226717.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:17.878Z,1513226717.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:17.950Z,1513226717.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:18.270Z,1513226718.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:18.297Z,1513226718.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:18.686Z,1513226718.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:18.707Z,1513226718.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.084Z,1513226719.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:19.135Z,1513226719.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.486Z,1513226719.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:19.522Z,1513226719.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.873Z,1513226719.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:19.916Z,1513226719.916 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.916Z,1513226719.916 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2017-12-14T04:45:19.916Z,1513226719.916 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:45:19.918Z,1513226719.918 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.918Z,1513226719.918 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2017-12-14T04:45:19.918Z,1513226719.918 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:45:19.920Z,1513226719.920 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:19.920Z,1513226719.920 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2017-12-14T04:45:19.920Z,1513226719.920 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:45:19.939Z,1513226719.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:45:19.939Z,1513226719.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:45:19.939Z,1513226719.939 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:45:20.268Z,1513226720.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:20.314Z,1513226720.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:45:20.314Z,1513226720.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2017-12-14T04:45:20.315Z,1513226720.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:45:20.315Z,1513226720.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2017-12-14T04:45:20.315Z,1513226720.315 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:45:20.315Z,1513226720.315 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2017-12-14T04:45:20.665Z,1513226720.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:20.678Z,1513226720.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:45:20.679Z,1513226720.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:45:20.679Z,1513226720.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:45:20.680Z,1513226720.680 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:45:20.680Z,1513226720.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:45:20.680Z,1513226720.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:45:20.681Z,1513226720.681 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:45:20.681Z,1513226720.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:45:20.682Z,1513226720.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:45:21.094Z,1513226721.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:21.127Z,1513226721.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:21.488Z,1513226721.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:21.515Z,1513226721.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:21.888Z,1513226721.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:21.904Z,1513226721.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:22.281Z,1513226722.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:22.299Z,1513226722.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:22.663Z,1513226722.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:22.695Z,1513226722.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:23.107Z,1513226723.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:23.152Z,1513226723.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:23.464Z,1513226723.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:23.495Z,1513226723.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:23.868Z,1513226723.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:23.906Z,1513226723.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:24.264Z,1513226724.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:24.296Z,1513226724.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:24.729Z,1513226724.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:24.768Z,1513226724.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:25.079Z,1513226725.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:25.106Z,1513226725.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:25.483Z,1513226725.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:25.498Z,1513226725.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:25.871Z,1513226725.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:25.896Z,1513226725.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:26.283Z,1513226726.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:26.318Z,1513226726.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:26.676Z,1513226726.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:26.766Z,1513226726.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:27.071Z,1513226727.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:27.094Z,1513226727.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:27.481Z,1513226727.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:27.505Z,1513226727.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:27.878Z,1513226727.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:27.913Z,1513226727.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:28.276Z,1513226728.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:28.320Z,1513226728.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:28.707Z,1513226728.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:28.747Z,1513226728.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:29.074Z,1513226729.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:29.117Z,1513226729.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:29.499Z,1513226729.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:29.531Z,1513226729.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:29.865Z,1513226729.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:29.903Z,1513226729.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:30.264Z,1513226730.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:30.303Z,1513226730.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:30.722Z,1513226730.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:30.768Z,1513226730.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:31.082Z,1513226731.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:31.106Z,1513226731.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:31.475Z,1513226731.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:31.491Z,1513226731.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:31.873Z,1513226731.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:31.887Z,1513226731.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:32.265Z,1513226732.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:32.291Z,1513226732.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:32.683Z,1513226732.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:32.801Z,1513226732.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:33.065Z,1513226733.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:33.099Z,1513226733.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:33.487Z,1513226733.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:33.502Z,1513226733.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:33.890Z,1513226733.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:33.905Z,1513226733.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:34.288Z,1513226734.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:34.307Z,1513226734.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:34.665Z,1513226734.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:34.692Z,1513226734.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:35.093Z,1513226735.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:35.137Z,1513226735.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:35.466Z,1513226735.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:35.503Z,1513226735.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:35.870Z,1513226735.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:35.895Z,1513226735.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:36.275Z,1513226736.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:36.290Z,1513226736.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:36.677Z,1513226736.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:36.692Z,1513226736.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:37.108Z,1513226737.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:37.140Z,1513226737.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:37.487Z,1513226737.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:37.507Z,1513226737.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:37.863Z,1513226737.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:37.888Z,1513226737.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:38.268Z,1513226738.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:38.303Z,1513226738.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:38.679Z,1513226738.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:38.800Z,1513226738.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:39.070Z,1513226739.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:39.139Z,1513226739.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:39.475Z,1513226739.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:39.490Z,1513226739.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:39.887Z,1513226739.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:39.935Z,1513226739.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:40.285Z,1513226740.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:40.322Z,1513226740.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:40.704Z,1513226740.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:40.775Z,1513226740.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:41.070Z,1513226741.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:41.093Z,1513226741.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:41.473Z,1513226741.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:41.509Z,1513226741.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:41.873Z,1513226741.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:41.887Z,1513226741.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:42.265Z,1513226742.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:42.316Z,1513226742.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:42.715Z,1513226742.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:42.751Z,1513226742.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:43.074Z,1513226743.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:43.096Z,1513226743.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:43.482Z,1513226743.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:43.507Z,1513226743.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:43.868Z,1513226743.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:43.882Z,1513226743.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:44.261Z,1513226744.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:44.277Z,1513226744.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:44.700Z,1513226744.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:44.758Z,1513226744.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:45.072Z,1513226745.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:45.091Z,1513226745.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:45.481Z,1513226745.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:45.496Z,1513226745.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:45.878Z,1513226745.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:45.892Z,1513226745.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:46.297Z,1513226746.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:46.327Z,1513226746.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:46.671Z,1513226746.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:46.685Z,1513226746.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:47.075Z,1513226747.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:47.107Z,1513226747.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:47.463Z,1513226747.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:47.490Z,1513226747.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:47.876Z,1513226747.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:47.892Z,1513226747.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:48.273Z,1513226748.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:48.300Z,1513226748.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:48.687Z,1513226748.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:48.707Z,1513226748.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:49.140Z,1513226749.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:49.211Z,1513226749.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:49.481Z,1513226749.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:49.495Z,1513226749.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:49.876Z,1513226749.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:49.895Z,1513226749.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:50.278Z,1513226750.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:50.299Z,1513226750.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:50.676Z,1513226750.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:50.695Z,1513226750.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:51.098Z,1513226751.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:51.136Z,1513226751.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:51.488Z,1513226751.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:51.502Z,1513226751.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:51.884Z,1513226751.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:51.900Z,1513226751.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:52.282Z,1513226752.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:52.303Z,1513226752.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:52.708Z,1513226752.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:52.806Z,1513226752.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:53.067Z,1513226753.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:53.111Z,1513226753.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:53.467Z,1513226753.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:53.494Z,1513226753.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:53.863Z,1513226753.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:53.889Z,1513226753.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:54.267Z,1513226754.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:54.303Z,1513226754.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:54.709Z,1513226754.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:54.788Z,1513226754.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:55.099Z,1513226755.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:55.114Z,1513226755.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:55.527Z,1513226755.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:55.553Z,1513226755.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:55.871Z,1513226755.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:55.903Z,1513226755.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:56.263Z,1513226756.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:56.278Z,1513226756.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:56.684Z,1513226756.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:56.756Z,1513226756.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:57.078Z,1513226757.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:57.093Z,1513226757.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:57.478Z,1513226757.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:57.499Z,1513226757.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:57.882Z,1513226757.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:57.897Z,1513226757.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:58.279Z,1513226758.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:58.300Z,1513226758.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:58.734Z,1513226758.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:58.780Z,1513226758.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:59.082Z,1513226759.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:59.116Z,1513226759.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:59.470Z,1513226759.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:59.486Z,1513226759.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:45:59.872Z,1513226759.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:45:59.951Z,1513226759.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:00.278Z,1513226760.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:00.293Z,1513226760.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:00.681Z,1513226760.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:00.794Z,1513226760.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:01.095Z,1513226761.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:01.111Z,1513226761.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:01.486Z,1513226761.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:01.532Z,1513226761.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:01.881Z,1513226761.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:01.896Z,1513226761.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:02.265Z,1513226762.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:02.298Z,1513226762.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:02.681Z,1513226762.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:02.696Z,1513226762.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:03.106Z,1513226763.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:03.173Z,1513226763.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:03.486Z,1513226763.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:03.512Z,1513226763.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:03.882Z,1513226763.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:03.908Z,1513226763.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:07.370Z,1513226767.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:07.385Z,1513226767.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:07.487Z,1513226767.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:07.515Z,1513226767.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:07.867Z,1513226767.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:07.889Z,1513226767.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:08.273Z,1513226768.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:08.287Z,1513226768.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:08.739Z,1513226768.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:08.778Z,1513226768.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:09.070Z,1513226769.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:09.099Z,1513226769.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:09.479Z,1513226769.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:09.499Z,1513226769.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:09.873Z,1513226769.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:09.927Z,1513226769.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:10.278Z,1513226770.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:10.293Z,1513226770.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:10.706Z,1513226770.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:10.774Z,1513226770.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:11.064Z,1513226771.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:11.103Z,1513226771.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:11.498Z,1513226771.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:11.534Z,1513226771.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:11.866Z,1513226771.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:11.892Z,1513226771.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:12.261Z,1513226772.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:12.295Z,1513226772.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:12.709Z,1513226772.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:12.768Z,1513226772.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:13.086Z,1513226773.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:13.115Z,1513226773.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:13.471Z,1513226773.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:13.491Z,1513226773.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:13.868Z,1513226773.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:13.884Z,1513226773.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:14.265Z,1513226774.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:14.288Z,1513226774.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:14.695Z,1513226774.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:14.814Z,1513226774.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:15.068Z,1513226775.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:15.095Z,1513226775.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:15.477Z,1513226775.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:15.492Z,1513226775.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:15.874Z,1513226775.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:15.889Z,1513226775.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:16.275Z,1513226776.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:16.290Z,1513226776.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:16.668Z,1513226776.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:16.682Z,1513226776.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:17.097Z,1513226777.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:17.122Z,1513226777.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:17.459Z,1513226777.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:17.486Z,1513226777.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:17.861Z,1513226777.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:17.888Z,1513226777.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:18.260Z,1513226778.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:18.289Z,1513226778.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:18.679Z,1513226778.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:18.694Z,1513226778.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:19.108Z,1513226779.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:19.145Z,1513226779.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:19.478Z,1513226779.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:19.499Z,1513226779.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:19.859Z,1513226779.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:19.957Z,1513226779.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:20.260Z,1513226780.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:20.319Z,1513226780.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:20.692Z,1513226780.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:20.819Z,1513226780.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:21.075Z,1513226781.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:21.102Z,1513226781.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:21.493Z,1513226781.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:21.539Z,1513226781.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:21.883Z,1513226781.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:21.930Z,1513226781.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:22.279Z,1513226782.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:22.370Z,1513226782.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:22.713Z,1513226782.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:22.792Z,1513226782.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:23.067Z,1513226783.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:23.107Z,1513226783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:23.468Z,1513226783.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:23.500Z,1513226783.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:23.875Z,1513226783.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:23.892Z,1513226783.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:24.271Z,1513226784.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:24.328Z,1513226784.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:24.723Z,1513226784.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:24.770Z,1513226784.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:25.076Z,1513226785.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:25.092Z,1513226785.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:25.471Z,1513226785.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:25.498Z,1513226785.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:25.860Z,1513226785.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:25.891Z,1513226785.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:26.261Z,1513226786.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:26.331Z,1513226786.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:26.753Z,1513226786.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:26.800Z,1513226786.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:27.077Z,1513226787.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:27.117Z,1513226787.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:27.507Z,1513226787.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:27.523Z,1513226787.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:27.877Z,1513226787.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:27.909Z,1513226787.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:28.279Z,1513226788.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:28.323Z,1513226788.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:28.669Z,1513226788.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:28.691Z,1513226788.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:29.066Z,1513226789.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:29.109Z,1513226789.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:29.469Z,1513226789.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:29.483Z,1513226789.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:29.884Z,1513226789.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:29.918Z,1513226789.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:30.266Z,1513226790.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:30.280Z,1513226790.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:30.698Z,1513226790.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:30.765Z,1513226790.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:31.128Z,1513226791.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:31.176Z,1513226791.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:31.474Z,1513226791.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:31.495Z,1513226791.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:31.862Z,1513226791.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:31.910Z,1513226791.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:32.271Z,1513226792.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:32.292Z,1513226792.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:32.697Z,1513226792.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:32.740Z,1513226792.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:33.100Z,1513226793.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:33.181Z,1513226793.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:33.475Z,1513226793.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:33.522Z,1513226793.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:33.892Z,1513226793.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:33.947Z,1513226793.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:34.281Z,1513226794.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:34.346Z,1513226794.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:34.709Z,1513226794.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:34.767Z,1513226794.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:35.070Z,1513226795.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:35.121Z,1513226795.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:35.470Z,1513226795.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:35.516Z,1513226795.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:35.872Z,1513226795.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:35.919Z,1513226795.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:36.267Z,1513226796.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:36.286Z,1513226796.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:36.724Z,1513226796.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:36.886Z,1513226796.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:37.076Z,1513226797.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:37.123Z,1513226797.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:37.482Z,1513226797.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:37.524Z,1513226797.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:37.870Z,1513226797.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:37.891Z,1513226797.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:38.276Z,1513226798.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:38.338Z,1513226798.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:38.719Z,1513226798.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:38.786Z,1513226798.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:39.124Z,1513226799.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:39.175Z,1513226799.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:39.482Z,1513226799.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:39.520Z,1513226799.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:39.885Z,1513226799.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:39.927Z,1513226799.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:40.332Z,1513226800.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:40.371Z,1513226800.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:40.723Z,1513226800.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:40.771Z,1513226800.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:41.060Z,1513226801.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:41.087Z,1513226801.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:41.460Z,1513226801.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:41.535Z,1513226801.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:41.864Z,1513226801.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:41.892Z,1513226801.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:42.286Z,1513226802.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:42.302Z,1513226802.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:42.679Z,1513226802.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:42.695Z,1513226802.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:43.078Z,1513226803.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:43.123Z,1513226803.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:43.479Z,1513226803.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:43.494Z,1513226803.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:43.868Z,1513226803.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:43.920Z,1513226803.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:44.274Z,1513226804.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:44.289Z,1513226804.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:44.674Z,1513226804.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:44.690Z,1513226804.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:45.089Z,1513226805.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:45.144Z,1513226805.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:45.486Z,1513226805.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:45.502Z,1513226805.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:45.884Z,1513226805.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:45.899Z,1513226805.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:46.287Z,1513226806.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:46.341Z,1513226806.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:46.659Z,1513226806.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:46.695Z,1513226806.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:47.088Z,1513226807.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:47.111Z,1513226807.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:47.459Z,1513226807.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:47.485Z,1513226807.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:47.859Z,1513226807.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:47.893Z,1513226807.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:48.256Z,1513226808.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:48.290Z,1513226808.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:48.695Z,1513226808.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:48.785Z,1513226808.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:49.077Z,1513226809.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:49.110Z,1513226809.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:49.487Z,1513226809.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:49.515Z,1513226809.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:49.866Z,1513226809.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:49.888Z,1513226809.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:50.265Z,1513226810.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:50.279Z,1513226810.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:50.720Z,1513226810.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:50.767Z,1513226810.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:51.067Z,1513226811.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:51.093Z,1513226811.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:51.482Z,1513226811.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:51.498Z,1513226811.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:51.878Z,1513226811.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:51.899Z,1513226811.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:52.276Z,1513226812.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:52.331Z,1513226812.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:52.741Z,1513226812.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:52.772Z,1513226812.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:53.075Z,1513226813.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:53.114Z,1513226813.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:53.464Z,1513226813.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:53.479Z,1513226813.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:53.869Z,1513226813.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:53.883Z,1513226813.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:54.264Z,1513226814.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:54.284Z,1513226814.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:54.725Z,1513226814.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:54.796Z,1513226814.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:55.077Z,1513226815.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:55.114Z,1513226815.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:55.478Z,1513226815.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:55.505Z,1513226815.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:55.870Z,1513226815.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:55.885Z,1513226815.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:56.259Z,1513226816.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:56.295Z,1513226816.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:56.660Z,1513226816.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:56.685Z,1513226816.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:57.059Z,1513226817.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:57.096Z,1513226817.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:57.486Z,1513226817.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:57.501Z,1513226817.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:57.865Z,1513226817.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:57.903Z,1513226817.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:58.274Z,1513226818.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:58.302Z,1513226818.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:58.663Z,1513226818.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:58.703Z,1513226818.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:59.146Z,1513226819.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:59.207Z,1513226819.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:59.468Z,1513226819.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:59.483Z,1513226819.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:46:59.879Z,1513226819.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:46:59.893Z,1513226819.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:00.270Z,1513226820.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:00.284Z,1513226820.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:00.678Z,1513226820.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:00.701Z,1513226820.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:01.107Z,1513226821.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:01.146Z,1513226821.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:01.484Z,1513226821.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:01.501Z,1513226821.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:01.871Z,1513226821.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:01.896Z,1513226821.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:02.260Z,1513226822.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:02.291Z,1513226822.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:02.704Z,1513226822.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:02.766Z,1513226822.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:03.065Z,1513226823.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:03.134Z,1513226823.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:03.479Z,1513226823.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:03.517Z,1513226823.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:03.878Z,1513226823.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:03.894Z,1513226823.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:04.278Z,1513226824.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:04.340Z,1513226824.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:07.825Z,1513226827.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:07.840Z,1513226827.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:07.933Z,1513226827.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:07.971Z,1513226827.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:08.337Z,1513226828.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:08.365Z,1513226828.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:08.776Z,1513226828.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:08.820Z,1513226828.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:09.140Z,1513226829.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:09.156Z,1513226829.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:09.527Z,1513226829.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:09.550Z,1513226829.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:09.932Z,1513226829.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:09.949Z,1513226829.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:10.331Z,1513226830.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:10.348Z,1513226830.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:10.775Z,1513226830.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:10.808Z,1513226830.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:11.155Z,1513226831.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:11.174Z,1513226831.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:11.538Z,1513226831.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:11.571Z,1513226831.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:11.951Z,1513226831.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:11.979Z,1513226831.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:12.340Z,1513226832.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:12.371Z,1513226832.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:12.724Z,1513226832.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:12.739Z,1513226832.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:13.147Z,1513226833.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:13.175Z,1513226833.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:13.546Z,1513226833.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:13.599Z,1513226833.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:13.938Z,1513226833.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:13.969Z,1513226833.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:14.373Z,1513226834.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:14.424Z,1513226834.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:14.732Z,1513226834.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:14.747Z,1513226834.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:15.172Z,1513226835.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:15.277Z,1513226835.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:15.528Z,1513226835.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:15.573Z,1513226835.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:15.933Z,1513226835.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:15.949Z,1513226835.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:16.326Z,1513226836.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:16.354Z,1513226836.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:16.770Z,1513226836.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:16.792Z,1513226836.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:17.138Z,1513226837.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:17.163Z,1513226837.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:17.539Z,1513226837.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:17.554Z,1513226837.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:17.931Z,1513226837.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:17.946Z,1513226837.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:18.334Z,1513226838.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:18.377Z,1513226838.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:18.760Z,1513226838.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:18.793Z,1513226838.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:19.136Z,1513226839.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:19.152Z,1513226839.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:19.541Z,1513226839.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:19.557Z,1513226839.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:19.942Z,1513226839.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:19.957Z,1513226839.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:20.341Z,1513226840.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:20.356Z,1513226840.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:20.762Z,1513226840.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:20.794Z,1513226840.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:21.134Z,1513226841.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:21.149Z,1513226841.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:21.573Z,1513226841.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:21.613Z,1513226841.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:21.932Z,1513226841.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:21.951Z,1513226841.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:22.339Z,1513226842.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:22.359Z,1513226842.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:22.767Z,1513226842.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:22.830Z,1513226842.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:23.143Z,1513226843.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:23.159Z,1513226843.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:23.533Z,1513226843.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:23.553Z,1513226843.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:23.934Z,1513226843.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:23.951Z,1513226843.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:24.334Z,1513226844.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:24.349Z,1513226844.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:24.790Z,1513226844.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:24.848Z,1513226844.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:25.138Z,1513226845.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:25.154Z,1513226845.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:25.539Z,1513226845.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:25.555Z,1513226845.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:25.924Z,1513226845.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:25.952Z,1513226845.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:26.335Z,1513226846.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:26.353Z,1513226846.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:26.732Z,1513226846.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:26.749Z,1513226846.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:27.132Z,1513226847.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:27.148Z,1513226847.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:27.541Z,1513226847.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:27.560Z,1513226847.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:27.942Z,1513226847.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:27.958Z,1513226847.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:28.335Z,1513226848.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:28.356Z,1513226848.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:28.727Z,1513226848.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:28.763Z,1513226848.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:29.155Z,1513226849.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:29.173Z,1513226849.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:29.530Z,1513226849.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:29.557Z,1513226849.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:29.935Z,1513226849.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:29.965Z,1513226849.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:30.327Z,1513226850.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:30.342Z,1513226850.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:30.771Z,1513226850.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:30.795Z,1513226850.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:31.152Z,1513226851.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:31.183Z,1513226851.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:31.616Z,1513226851.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:31.683Z,1513226851.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:31.944Z,1513226851.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:32.003Z,1513226852.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:32.343Z,1513226852.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:32.359Z,1513226852.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:32.765Z,1513226852.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:32.803Z,1513226852.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:33.135Z,1513226853.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:33.174Z,1513226853.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:33.542Z,1513226853.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:33.571Z,1513226853.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:33.941Z,1513226853.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:33.956Z,1513226853.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:34.369Z,1513226854.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:34.398Z,1513226854.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:34.766Z,1513226854.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:34.838Z,1513226854.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:35.127Z,1513226855.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:35.159Z,1513226855.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:35.535Z,1513226855.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:35.594Z,1513226855.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:35.931Z,1513226855.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:35.946Z,1513226855.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:36.337Z,1513226856.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:36.387Z,1513226856.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:36.764Z,1513226856.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:36.796Z,1513226856.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:37.142Z,1513226857.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:37.163Z,1513226857.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:37.581Z,1513226857.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:37.652Z,1513226857.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:37.923Z,1513226857.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:37.949Z,1513226857.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:38.323Z,1513226858.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:38.349Z,1513226858.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:38.810Z,1513226858.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:38.853Z,1513226858.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:39.128Z,1513226859.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:39.155Z,1513226859.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:39.555Z,1513226859.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:39.622Z,1513226859.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:39.942Z,1513226859.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:39.958Z,1513226859.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:40.342Z,1513226860.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:40.363Z,1513226860.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:40.723Z,1513226860.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:40.818Z,1513226860.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:41.123Z,1513226861.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:41.150Z,1513226861.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:41.524Z,1513226861.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:41.563Z,1513226861.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:41.924Z,1513226861.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:41.939Z,1513226861.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:42.262Z,1513226862.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:42.327Z,1513226862.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:42.341Z,1513226862.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:42.738Z,1513226862.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:42.765Z,1513226862.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:43.059Z,1513226863.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:43.165Z,1513226863.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:43.179Z,1513226863.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:43.465Z,1513226863.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:43.549Z,1513226863.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:43.574Z,1513226863.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:43.940Z,1513226863.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:43.968Z,1513226863.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:44.333Z,1513226864.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:44.349Z,1513226864.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:44.765Z,1513226864.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:44.816Z,1513226864.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:45.139Z,1513226865.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:45.178Z,1513226865.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:45.537Z,1513226865.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:45.553Z,1513226865.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:45.946Z,1513226865.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:45.973Z,1513226865.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:46.347Z,1513226866.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:46.376Z,1513226866.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:46.765Z,1513226866.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:46.785Z,1513226866.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:47.152Z,1513226867.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:47.192Z,1513226867.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:47.524Z,1513226867.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:47.552Z,1513226867.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:47.924Z,1513226867.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:47.952Z,1513226867.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:48.335Z,1513226868.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:48.355Z,1513226868.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:48.764Z,1513226868.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:48.796Z,1513226868.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:49.148Z,1513226869.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:49.170Z,1513226869.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:49.548Z,1513226869.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:49.563Z,1513226869.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:49.920Z,1513226869.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:49.955Z,1513226869.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:50.366Z,1513226870.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:50.397Z,1513226870.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:50.766Z,1513226870.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:50.801Z,1513226870.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:51.123Z,1513226871.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:51.159Z,1513226871.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:51.548Z,1513226871.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:51.563Z,1513226871.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:51.943Z,1513226871.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:51.978Z,1513226871.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:52.342Z,1513226872.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:52.373Z,1513226872.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:52.799Z,1513226872.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:52.833Z,1513226872.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:53.136Z,1513226873.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:53.167Z,1513226873.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:53.564Z,1513226873.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:53.599Z,1513226873.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:53.931Z,1513226873.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:53.951Z,1513226873.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:54.346Z,1513226874.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:54.377Z,1513226874.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:54.742Z,1513226874.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:54.763Z,1513226874.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:55.138Z,1513226875.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:55.159Z,1513226875.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:55.535Z,1513226875.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:55.552Z,1513226875.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:55.931Z,1513226875.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:55.947Z,1513226875.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:56.250Z,1513226876.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:56.332Z,1513226876.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:56.347Z,1513226876.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:56.770Z,1513226876.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:56.859Z,1513226876.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:57.049Z,1513226877.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:57.151Z,1513226877.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:57.166Z,1513226877.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:57.465Z,1513226877.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:57.548Z,1513226877.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:57.610Z,1513226877.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:57.927Z,1513226877.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:57.955Z,1513226877.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:58.261Z,1513226878.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:58.323Z,1513226878.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:58.372Z,1513226878.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:58.763Z,1513226878.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:58.803Z,1513226878.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:59.057Z,1513226879.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:59.130Z,1513226879.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:59.195Z,1513226879.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:59.461Z,1513226879.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:59.534Z,1513226879.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:47:59.567Z,1513226879.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:47:59.991Z,1513226879.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:00.068Z,1513226880.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:00.337Z,1513226880.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:00.371Z,1513226880.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:00.761Z,1513226880.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:00.791Z,1513226880.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:01.136Z,1513226881.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:01.163Z,1513226881.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:01.527Z,1513226881.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:01.547Z,1513226881.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:01.933Z,1513226881.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:01.948Z,1513226881.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:02.340Z,1513226882.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:02.425Z,1513226882.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:02.764Z,1513226882.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:02.788Z,1513226882.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:03.152Z,1513226883.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:03.188Z,1513226883.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:03.196Z,1513226883.196 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:43:03.2Z
2017-12-14T04:48:03.201Z,1513226883.201 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:48:03.201Z,1513226883.201 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:48:03.539Z,1513226883.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:03.559Z,1513226883.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:04.301Z,1513226884.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:04.316Z,1513226884.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:04.412Z,1513226884.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:04.456Z,1513226884.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:07.842Z,1513226887.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:07.888Z,1513226887.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:07.970Z,1513226887.970 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0100.lzma
2017-12-14T04:48:08.000Z,1513226888.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:08.045Z,1513226888.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:08.350Z,1513226888.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:08.366Z,1513226888.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:08.715Z,1513226888.715 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0100.lzma.bak
2017-12-14T04:48:08.715Z,1513226888.715 [DataOverHttps](INFO): SBD MOMSN=5437761
2017-12-14T04:48:08.770Z,1513226888.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:08.795Z,1513226888.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:10.151Z,1513226890.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:10.166Z,1513226890.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:10.253Z,1513226890.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:10.273Z,1513226890.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:10.319Z,1513226890.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:11.051Z,1513226891.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:11.466Z,1513226891.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:12.261Z,1513226892.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:13.057Z,1513226893.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:13.461Z,1513226893.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:13.821Z,1513226893.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:13.851Z,1513226893.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:13.960Z,1513226893.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:14.001Z,1513226894.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:14.314Z,1513226894.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:14.335Z,1513226894.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:14.765Z,1513226894.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:14.780Z,1513226894.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:15.114Z,1513226895.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:15.128Z,1513226895.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:15.504Z,1513226895.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:15.523Z,1513226895.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:19.192Z,1513226899.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:19.216Z,1513226899.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:19.329Z,1513226899.329 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0101.lzma
2017-12-14T04:48:19.380Z,1513226899.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:19.404Z,1513226899.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:19.750Z,1513226899.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:19.803Z,1513226899.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:20.103Z,1513226900.103 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0101.lzma.bak
2017-12-14T04:48:20.103Z,1513226900.103 [DataOverHttps](INFO): SBD MOMSN=5437763
2017-12-14T04:48:20.146Z,1513226900.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:20.205Z,1513226900.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:21.406Z,1513226901.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:21.516Z,1513226901.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:21.516Z,1513226901.516 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2017-12-14T04:48:21.516Z,1513226901.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:48:21.518Z,1513226901.518 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:21.518Z,1513226901.518 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2017-12-14T04:48:21.518Z,1513226901.518 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:48:21.520Z,1513226901.520 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:21.520Z,1513226901.520 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2017-12-14T04:48:21.520Z,1513226901.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:48:21.530Z,1513226901.530 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:48:21.530Z,1513226901.530 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:48:21.530Z,1513226901.530 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:48:21.540Z,1513226901.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:48:21.541Z,1513226901.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:48:21.541Z,1513226901.541 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:48:21.614Z,1513226901.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:21.693Z,1513226901.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:48:21.693Z,1513226901.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2017-12-14T04:48:21.694Z,1513226901.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:48:21.694Z,1513226901.694 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2017-12-14T04:48:21.694Z,1513226901.694 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:48:21.694Z,1513226901.694 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2017-12-14T04:48:24.973Z,1513226904.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:25.067Z,1513226905.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:48:25.068Z,1513226905.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:48:25.068Z,1513226905.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:48:25.068Z,1513226905.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:48:25.069Z,1513226905.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:48:25.069Z,1513226905.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:48:25.093Z,1513226905.093 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:48:25.093Z,1513226905.093 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:48:25.094Z,1513226905.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:48:25.192Z,1513226905.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:25.235Z,1513226905.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:25.611Z,1513226905.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:25.670Z,1513226905.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:26.022Z,1513226906.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:26.072Z,1513226906.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:26.399Z,1513226906.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:26.433Z,1513226906.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:26.787Z,1513226906.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:26.825Z,1513226906.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:27.187Z,1513226907.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:27.218Z,1513226907.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:27.592Z,1513226907.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:27.626Z,1513226907.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:27.995Z,1513226907.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:28.029Z,1513226908.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:28.405Z,1513226908.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:28.439Z,1513226908.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:28.802Z,1513226908.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:28.875Z,1513226908.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:29.219Z,1513226909.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:29.235Z,1513226909.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:29.598Z,1513226909.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:29.631Z,1513226909.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:29.990Z,1513226909.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:30.004Z,1513226910.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:30.398Z,1513226910.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:30.413Z,1513226910.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:30.797Z,1513226910.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:30.812Z,1513226910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:31.193Z,1513226911.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:31.208Z,1513226911.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:31.598Z,1513226911.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:31.699Z,1513226911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:32.015Z,1513226912.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:32.070Z,1513226912.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:32.398Z,1513226912.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:32.419Z,1513226912.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:32.796Z,1513226912.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:32.815Z,1513226912.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:33.197Z,1513226913.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:33.213Z,1513226913.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:33.600Z,1513226913.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:33.615Z,1513226913.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:33.996Z,1513226913.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:34.050Z,1513226914.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:34.406Z,1513226914.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:34.421Z,1513226914.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:34.812Z,1513226914.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:34.852Z,1513226914.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:35.218Z,1513226915.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:35.266Z,1513226915.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:35.587Z,1513226915.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:35.616Z,1513226915.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:36.012Z,1513226916.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:36.029Z,1513226916.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:36.400Z,1513226916.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:36.414Z,1513226916.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:36.788Z,1513226916.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:36.823Z,1513226916.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:37.187Z,1513226917.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:37.214Z,1513226917.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:37.602Z,1513226917.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:37.635Z,1513226917.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:38.012Z,1513226918.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:38.027Z,1513226918.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:38.420Z,1513226918.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:38.480Z,1513226918.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:38.798Z,1513226918.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:38.832Z,1513226918.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:39.203Z,1513226919.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:39.234Z,1513226919.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:39.596Z,1513226919.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:39.611Z,1513226919.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:39.996Z,1513226919.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:40.018Z,1513226920.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:40.402Z,1513226920.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:40.423Z,1513226920.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:40.801Z,1513226920.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:40.823Z,1513226920.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:41.218Z,1513226921.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:41.259Z,1513226921.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:41.601Z,1513226921.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:41.616Z,1513226921.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:41.992Z,1513226921.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:42.047Z,1513226922.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:42.404Z,1513226922.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:42.427Z,1513226922.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:42.800Z,1513226922.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:42.815Z,1513226922.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:43.187Z,1513226923.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:43.224Z,1513226923.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:43.610Z,1513226923.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:43.626Z,1513226923.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:44.014Z,1513226924.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:44.036Z,1513226924.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:44.412Z,1513226924.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:44.431Z,1513226924.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:44.813Z,1513226924.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:44.840Z,1513226924.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:45.211Z,1513226925.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:45.226Z,1513226925.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:45.588Z,1513226925.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:45.628Z,1513226925.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:45.996Z,1513226925.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:46.082Z,1513226926.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:46.406Z,1513226926.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:46.444Z,1513226926.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:46.801Z,1513226926.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:46.874Z,1513226926.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:47.216Z,1513226927.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:47.231Z,1513226927.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:47.588Z,1513226927.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:47.663Z,1513226927.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:48.049Z,1513226928.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:48.080Z,1513226928.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:48.398Z,1513226928.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:48.432Z,1513226928.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:48.807Z,1513226928.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:48.826Z,1513226928.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:49.187Z,1513226929.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:49.265Z,1513226929.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:49.605Z,1513226929.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:49.640Z,1513226929.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:49.995Z,1513226929.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:50.008Z,1513226930.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:50.407Z,1513226930.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:50.432Z,1513226930.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:50.799Z,1513226930.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:50.834Z,1513226930.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:51.258Z,1513226931.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:51.294Z,1513226931.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:51.598Z,1513226931.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:51.635Z,1513226931.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:51.997Z,1513226931.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:52.013Z,1513226932.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:52.401Z,1513226932.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:52.416Z,1513226932.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:52.810Z,1513226932.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:52.855Z,1513226932.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:53.219Z,1513226933.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:53.248Z,1513226933.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:53.597Z,1513226933.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:53.611Z,1513226933.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:54.060Z,1513226934.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:54.075Z,1513226934.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:54.438Z,1513226934.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:54.492Z,1513226934.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:54.801Z,1513226934.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:54.840Z,1513226934.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:55.195Z,1513226935.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:55.219Z,1513226935.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:55.604Z,1513226935.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:55.620Z,1513226935.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:56.005Z,1513226936.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:56.060Z,1513226936.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:56.406Z,1513226936.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:56.421Z,1513226936.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:56.797Z,1513226936.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:56.811Z,1513226936.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:57.203Z,1513226937.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:57.218Z,1513226937.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:57.608Z,1513226937.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:57.646Z,1513226937.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:57.987Z,1513226937.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:58.022Z,1513226938.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:58.397Z,1513226938.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:58.423Z,1513226938.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:58.811Z,1513226938.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:58.826Z,1513226938.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:59.198Z,1513226939.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:59.296Z,1513226939.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:59.602Z,1513226939.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:48:59.616Z,1513226939.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:48:59.999Z,1513226939.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:00.020Z,1513226940.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:00.406Z,1513226940.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:00.420Z,1513226940.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:00.812Z,1513226940.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:00.852Z,1513226940.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:01.208Z,1513226941.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:01.251Z,1513226941.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:01.594Z,1513226941.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:01.619Z,1513226941.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:01.984Z,1513226941.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:02.012Z,1513226942.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:02.410Z,1513226942.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:02.441Z,1513226942.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:02.823Z,1513226942.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:02.869Z,1513226942.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:03.276Z,1513226943.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:03.415Z,1513226943.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:03.598Z,1513226943.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:03.651Z,1513226943.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:04.024Z,1513226944.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:04.061Z,1513226944.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:04.396Z,1513226944.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:04.416Z,1513226944.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:04.795Z,1513226944.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:04.815Z,1513226944.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:05.193Z,1513226945.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:05.223Z,1513226945.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:05.610Z,1513226945.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:05.634Z,1513226945.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:06.010Z,1513226946.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:06.031Z,1513226946.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:06.081Z,1513226946.081 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:49:06.408Z,1513226946.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:06.427Z,1513226946.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:06.787Z,1513226946.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:06.816Z,1513226946.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:07.198Z,1513226947.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:07.239Z,1513226947.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:07.588Z,1513226947.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:07.613Z,1513226947.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:07.992Z,1513226947.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:08.039Z,1513226948.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:08.407Z,1513226948.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:08.470Z,1513226948.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:08.812Z,1513226948.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:08.834Z,1513226948.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:09.212Z,1513226949.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:09.227Z,1513226949.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:09.600Z,1513226949.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:09.615Z,1513226949.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:09.987Z,1513226949.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:10.035Z,1513226950.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:10.413Z,1513226950.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:10.475Z,1513226950.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:10.802Z,1513226950.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:10.858Z,1513226950.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:11.210Z,1513226951.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:11.224Z,1513226951.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:11.612Z,1513226951.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:11.631Z,1513226951.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:12.013Z,1513226952.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:12.058Z,1513226952.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:12.411Z,1513226952.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:12.431Z,1513226952.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:12.787Z,1513226952.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:12.814Z,1513226952.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:13.209Z,1513226953.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:13.224Z,1513226953.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:13.634Z,1513226953.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:13.672Z,1513226953.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:13.987Z,1513226953.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:14.020Z,1513226954.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:14.410Z,1513226954.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:14.424Z,1513226954.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:14.821Z,1513226954.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:14.835Z,1513226954.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:15.212Z,1513226955.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:15.227Z,1513226955.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:15.593Z,1513226955.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:15.619Z,1513226955.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:15.987Z,1513226955.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:16.024Z,1513226956.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:16.405Z,1513226956.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:16.424Z,1513226956.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:16.907Z,1513226956.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:16.983Z,1513226956.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:17.197Z,1513226957.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:17.243Z,1513226957.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:17.591Z,1513226957.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:17.623Z,1513226957.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:17.992Z,1513226957.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:18.023Z,1513226958.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:18.412Z,1513226958.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:18.426Z,1513226958.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:18.815Z,1513226958.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:18.829Z,1513226958.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:19.210Z,1513226959.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:19.275Z,1513226959.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:19.592Z,1513226959.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:19.622Z,1513226959.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:19.988Z,1513226959.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:20.026Z,1513226960.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:20.402Z,1513226960.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:20.429Z,1513226960.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:20.802Z,1513226960.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:20.829Z,1513226960.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:21.202Z,1513226961.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:21.231Z,1513226961.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:21.592Z,1513226961.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:21.626Z,1513226961.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:22.003Z,1513226962.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:22.029Z,1513226962.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:25.489Z,1513226965.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:25.527Z,1513226965.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:25.623Z,1513226965.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:25.669Z,1513226965.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:25.997Z,1513226965.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:26.031Z,1513226966.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:26.416Z,1513226966.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:26.452Z,1513226966.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:26.784Z,1513226966.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:26.799Z,1513226966.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:27.187Z,1513226967.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:27.202Z,1513226967.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:27.597Z,1513226967.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:27.612Z,1513226967.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:27.995Z,1513226967.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:28.015Z,1513226968.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:28.394Z,1513226968.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:28.410Z,1513226968.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:28.786Z,1513226968.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:28.801Z,1513226968.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:29.195Z,1513226969.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:29.215Z,1513226969.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:29.598Z,1513226969.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:29.628Z,1513226969.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:29.976Z,1513226969.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:30.013Z,1513226970.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:30.408Z,1513226970.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:30.423Z,1513226970.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:30.812Z,1513226970.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:30.836Z,1513226970.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:31.208Z,1513226971.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:31.278Z,1513226971.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:31.583Z,1513226971.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:31.638Z,1513226971.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:31.985Z,1513226971.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:31.999Z,1513226971.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:32.435Z,1513226972.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:32.487Z,1513226972.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:32.802Z,1513226972.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:32.827Z,1513226972.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:33.188Z,1513226973.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:33.284Z,1513226973.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:33.589Z,1513226973.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:33.603Z,1513226973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:33.982Z,1513226973.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:34.009Z,1513226974.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:34.394Z,1513226974.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:34.408Z,1513226974.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:34.794Z,1513226974.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:34.809Z,1513226974.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:35.207Z,1513226975.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:35.239Z,1513226975.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:35.590Z,1513226975.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:35.612Z,1513226975.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:36.014Z,1513226976.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:36.067Z,1513226976.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:36.393Z,1513226976.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:36.415Z,1513226976.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:36.789Z,1513226976.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:36.803Z,1513226976.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:37.176Z,1513226977.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:37.213Z,1513226977.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:37.591Z,1513226977.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:37.610Z,1513226977.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:37.998Z,1513226977.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:38.013Z,1513226978.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:38.395Z,1513226978.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:38.415Z,1513226978.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:38.775Z,1513226978.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:38.808Z,1513226978.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:39.197Z,1513226979.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:39.220Z,1513226979.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:39.577Z,1513226979.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:39.681Z,1513226979.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:39.984Z,1513226979.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:40.019Z,1513226980.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:40.393Z,1513226980.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:40.429Z,1513226980.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:40.793Z,1513226980.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:40.807Z,1513226980.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:41.198Z,1513226981.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:41.212Z,1513226981.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:41.590Z,1513226981.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:41.639Z,1513226981.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:41.986Z,1513226981.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:42.003Z,1513226982.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:42.399Z,1513226982.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:42.446Z,1513226982.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:42.792Z,1513226982.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:42.812Z,1513226982.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:43.194Z,1513226983.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:43.209Z,1513226983.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:43.593Z,1513226983.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:43.608Z,1513226983.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:44.146Z,1513226984.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:44.160Z,1513226984.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:44.394Z,1513226984.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:44.434Z,1513226984.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:44.812Z,1513226984.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:44.843Z,1513226984.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:45.198Z,1513226985.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:45.214Z,1513226985.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:45.609Z,1513226985.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:45.650Z,1513226985.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:45.975Z,1513226985.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:46.011Z,1513226986.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:46.400Z,1513226986.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:46.415Z,1513226986.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:46.786Z,1513226986.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:46.817Z,1513226986.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:47.195Z,1513226987.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:47.217Z,1513226987.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:47.584Z,1513226987.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:47.598Z,1513226987.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:47.979Z,1513226987.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:47.994Z,1513226987.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:48.393Z,1513226988.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:48.419Z,1513226988.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:48.795Z,1513226988.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:48.849Z,1513226988.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:49.206Z,1513226989.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:49.232Z,1513226989.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:49.588Z,1513226989.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:49.604Z,1513226989.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:49.999Z,1513226989.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:50.133Z,1513226990.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:50.387Z,1513226990.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:50.426Z,1513226990.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:50.786Z,1513226990.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:50.801Z,1513226990.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:51.186Z,1513226991.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:51.201Z,1513226991.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:51.591Z,1513226991.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:51.606Z,1513226991.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:52.048Z,1513226992.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:52.084Z,1513226992.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:52.388Z,1513226992.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:52.433Z,1513226992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:52.790Z,1513226992.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:52.805Z,1513226992.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:53.178Z,1513226993.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:53.205Z,1513226993.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:53.594Z,1513226993.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:53.681Z,1513226993.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:53.972Z,1513226993.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:53.996Z,1513226993.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:54.405Z,1513226994.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:54.420Z,1513226994.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:54.789Z,1513226994.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:54.851Z,1513226994.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:55.209Z,1513226995.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:55.257Z,1513226995.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:55.580Z,1513226995.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:55.627Z,1513226995.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:55.987Z,1513226995.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:56.024Z,1513226996.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:56.392Z,1513226996.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:56.427Z,1513226996.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:56.810Z,1513226996.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:56.824Z,1513226996.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:57.198Z,1513226997.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:57.227Z,1513226997.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:57.587Z,1513226997.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:57.610Z,1513226997.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:57.986Z,1513226997.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:58.001Z,1513226998.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:58.393Z,1513226998.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:58.455Z,1513226998.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:58.811Z,1513226998.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:58.838Z,1513226998.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:59.194Z,1513226999.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:59.209Z,1513226999.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:59.589Z,1513226999.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:49:59.604Z,1513226999.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:49:59.972Z,1513226999.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:00.004Z,1513227000.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:00.402Z,1513227000.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:00.417Z,1513227000.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:00.802Z,1513227000.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:00.816Z,1513227000.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:01.200Z,1513227001.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:01.223Z,1513227001.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:01.588Z,1513227001.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:01.612Z,1513227001.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:01.975Z,1513227001.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:01.995Z,1513227001.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:02.398Z,1513227002.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:02.416Z,1513227002.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:02.797Z,1513227002.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:02.819Z,1513227002.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:03.199Z,1513227003.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:03.213Z,1513227003.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:03.585Z,1513227003.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:03.602Z,1513227003.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:03.979Z,1513227003.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:04.039Z,1513227004.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:04.397Z,1513227004.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:04.419Z,1513227004.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:04.800Z,1513227004.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:04.815Z,1513227004.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:05.202Z,1513227005.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:05.223Z,1513227005.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:05.592Z,1513227005.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:05.607Z,1513227005.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:05.976Z,1513227005.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:06.011Z,1513227006.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:06.376Z,1513227006.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:06.408Z,1513227006.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:06.775Z,1513227006.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:06.811Z,1513227006.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:07.179Z,1513227007.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:07.211Z,1513227007.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:07.587Z,1513227007.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:07.636Z,1513227007.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:07.998Z,1513227007.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:08.013Z,1513227008.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:08.400Z,1513227008.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:08.415Z,1513227008.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:08.775Z,1513227008.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:08.808Z,1513227008.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:09.191Z,1513227009.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:09.207Z,1513227009.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:09.576Z,1513227009.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:09.612Z,1513227009.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:09.988Z,1513227009.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:10.003Z,1513227010.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:10.398Z,1513227010.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:10.419Z,1513227010.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:10.799Z,1513227010.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:10.814Z,1513227010.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:11.198Z,1513227011.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:11.213Z,1513227011.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:11.593Z,1513227011.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:11.608Z,1513227011.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:11.975Z,1513227011.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:12.001Z,1513227012.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:12.390Z,1513227012.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:12.421Z,1513227012.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:12.814Z,1513227012.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:12.874Z,1513227012.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:13.204Z,1513227013.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:13.223Z,1513227013.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:13.580Z,1513227013.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:13.611Z,1513227013.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:13.975Z,1513227013.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:14.011Z,1513227014.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:14.416Z,1513227014.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:14.463Z,1513227014.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:14.798Z,1513227014.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:14.813Z,1513227014.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:15.186Z,1513227015.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:15.224Z,1513227015.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:15.581Z,1513227015.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:15.617Z,1513227015.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:15.975Z,1513227015.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:16.062Z,1513227016.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:16.393Z,1513227016.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:16.419Z,1513227016.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:16.793Z,1513227016.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:16.863Z,1513227016.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:17.197Z,1513227017.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:17.227Z,1513227017.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:17.578Z,1513227017.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:17.652Z,1513227017.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:17.976Z,1513227017.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:18.011Z,1513227018.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:18.400Z,1513227018.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:18.415Z,1513227018.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:18.809Z,1513227018.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:18.830Z,1513227018.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:19.203Z,1513227019.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:19.218Z,1513227019.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:19.576Z,1513227019.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:19.607Z,1513227019.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:19.978Z,1513227019.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:20.012Z,1513227020.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:20.385Z,1513227020.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:20.416Z,1513227020.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:20.805Z,1513227020.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:20.843Z,1513227020.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:21.195Z,1513227021.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:21.217Z,1513227021.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:21.582Z,1513227021.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:21.596Z,1513227021.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:21.983Z,1513227021.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:22.019Z,1513227022.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:22.393Z,1513227022.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:22.422Z,1513227022.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:25.817Z,1513227025.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:25.875Z,1513227025.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:25.983Z,1513227025.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:26.022Z,1513227026.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:26.328Z,1513227026.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:26.349Z,1513227026.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:26.806Z,1513227026.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:26.850Z,1513227026.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:27.123Z,1513227027.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:27.180Z,1513227027.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:27.561Z,1513227027.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:27.577Z,1513227027.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:27.937Z,1513227027.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:27.969Z,1513227027.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:28.342Z,1513227028.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:28.375Z,1513227028.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:28.729Z,1513227028.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:28.743Z,1513227028.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:29.123Z,1513227029.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:29.144Z,1513227029.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:29.532Z,1513227029.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:29.551Z,1513227029.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:29.931Z,1513227029.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:29.946Z,1513227029.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:30.371Z,1513227030.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:30.396Z,1513227030.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:30.746Z,1513227030.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:30.767Z,1513227030.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:31.148Z,1513227031.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:31.167Z,1513227031.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:31.536Z,1513227031.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:31.553Z,1513227031.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:31.932Z,1513227031.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:31.948Z,1513227031.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:32.329Z,1513227032.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:32.359Z,1513227032.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:32.752Z,1513227032.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:32.797Z,1513227032.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:33.147Z,1513227033.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:33.167Z,1513227033.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:33.559Z,1513227033.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:33.599Z,1513227033.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:33.927Z,1513227033.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:33.957Z,1513227033.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:34.324Z,1513227034.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:34.359Z,1513227034.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:34.770Z,1513227034.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:34.811Z,1513227034.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:35.128Z,1513227035.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:35.160Z,1513227035.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:35.548Z,1513227035.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:35.563Z,1513227035.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:35.950Z,1513227035.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:35.965Z,1513227035.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:36.351Z,1513227036.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:36.366Z,1513227036.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:36.780Z,1513227036.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:36.807Z,1513227036.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:37.123Z,1513227037.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:37.152Z,1513227037.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:37.523Z,1513227037.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:37.553Z,1513227037.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:37.928Z,1513227037.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:38.003Z,1513227038.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:38.324Z,1513227038.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:38.379Z,1513227038.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:38.765Z,1513227038.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:38.780Z,1513227038.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:39.146Z,1513227039.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:39.203Z,1513227039.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:39.534Z,1513227039.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:39.571Z,1513227039.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:39.928Z,1513227039.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:39.979Z,1513227039.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:40.332Z,1513227040.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:40.362Z,1513227040.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:40.808Z,1513227040.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:40.827Z,1513227040.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:41.127Z,1513227041.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:41.159Z,1513227041.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:41.544Z,1513227041.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:41.559Z,1513227041.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:41.937Z,1513227041.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:41.959Z,1513227041.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:42.334Z,1513227042.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:42.350Z,1513227042.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:42.732Z,1513227042.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:42.753Z,1513227042.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:43.139Z,1513227043.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:43.160Z,1513227043.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:43.536Z,1513227043.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:43.552Z,1513227043.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:43.938Z,1513227043.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:43.959Z,1513227043.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:44.337Z,1513227044.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:44.352Z,1513227044.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:44.742Z,1513227044.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:44.758Z,1513227044.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:45.150Z,1513227045.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:45.166Z,1513227045.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:45.547Z,1513227045.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:45.561Z,1513227045.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:45.936Z,1513227045.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:45.951Z,1513227045.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:46.324Z,1513227046.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:46.352Z,1513227046.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:46.773Z,1513227046.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:46.808Z,1513227046.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:47.135Z,1513227047.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:47.151Z,1513227047.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:47.534Z,1513227047.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:47.549Z,1513227047.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:47.937Z,1513227047.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:47.952Z,1513227047.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:48.334Z,1513227048.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:48.380Z,1513227048.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:48.741Z,1513227048.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:48.765Z,1513227048.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:49.123Z,1513227049.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:49.157Z,1513227049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:49.535Z,1513227049.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:49.552Z,1513227049.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:49.930Z,1513227049.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:49.956Z,1513227049.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:50.336Z,1513227050.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:50.351Z,1513227050.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:50.760Z,1513227050.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:50.788Z,1513227050.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:51.148Z,1513227051.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:51.163Z,1513227051.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:51.547Z,1513227051.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:51.562Z,1513227051.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:51.917Z,1513227051.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:51.951Z,1513227051.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:52.327Z,1513227052.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:52.353Z,1513227052.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:52.759Z,1513227052.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:52.773Z,1513227052.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:53.142Z,1513227053.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:53.254Z,1513227053.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:53.548Z,1513227053.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:53.562Z,1513227053.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:53.948Z,1513227053.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:53.998Z,1513227053.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:54.347Z,1513227054.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:54.363Z,1513227054.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:54.782Z,1513227054.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:54.835Z,1513227054.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:55.128Z,1513227055.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:55.159Z,1513227055.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:55.532Z,1513227055.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:55.548Z,1513227055.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:55.931Z,1513227055.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:55.955Z,1513227055.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:56.347Z,1513227056.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:56.380Z,1513227056.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:56.737Z,1513227056.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:56.754Z,1513227056.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:57.134Z,1513227057.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:57.149Z,1513227057.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:57.548Z,1513227057.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:57.579Z,1513227057.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:57.934Z,1513227057.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:57.949Z,1513227057.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:58.338Z,1513227058.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:58.359Z,1513227058.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:58.742Z,1513227058.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:58.763Z,1513227058.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:59.150Z,1513227059.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:59.185Z,1513227059.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:59.533Z,1513227059.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:59.548Z,1513227059.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:50:59.937Z,1513227059.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:50:59.959Z,1513227059.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:00.336Z,1513227060.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:00.435Z,1513227060.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:00.757Z,1513227060.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:00.816Z,1513227060.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:01.149Z,1513227061.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:01.164Z,1513227061.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:01.547Z,1513227061.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:01.563Z,1513227061.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:01.923Z,1513227061.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:01.990Z,1513227061.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:02.323Z,1513227062.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:02.350Z,1513227062.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:02.755Z,1513227062.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:02.812Z,1513227062.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:03.124Z,1513227063.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:03.151Z,1513227063.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:03.551Z,1513227063.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:03.611Z,1513227063.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:03.937Z,1513227063.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:03.954Z,1513227063.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:04.338Z,1513227064.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:04.353Z,1513227064.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:04.754Z,1513227064.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:04.785Z,1513227064.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:05.133Z,1513227065.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:05.149Z,1513227065.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:05.537Z,1513227065.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:05.552Z,1513227065.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:05.936Z,1513227065.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:05.952Z,1513227065.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:06.332Z,1513227066.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:06.348Z,1513227066.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:06.771Z,1513227066.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:06.787Z,1513227066.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:07.150Z,1513227067.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:07.180Z,1513227067.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:07.558Z,1513227067.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:07.588Z,1513227067.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:07.931Z,1513227067.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:07.948Z,1513227067.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:08.331Z,1513227068.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:08.352Z,1513227068.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:08.814Z,1513227068.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:08.848Z,1513227068.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:09.127Z,1513227069.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:09.153Z,1513227069.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:09.548Z,1513227069.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:09.563Z,1513227069.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:09.949Z,1513227069.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:09.963Z,1513227069.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:10.342Z,1513227070.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:10.363Z,1513227070.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:10.746Z,1513227070.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:10.789Z,1513227070.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:11.123Z,1513227071.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:11.175Z,1513227071.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:11.527Z,1513227071.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:11.554Z,1513227071.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:11.924Z,1513227071.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:11.960Z,1513227071.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:12.324Z,1513227072.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:12.352Z,1513227072.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:12.733Z,1513227072.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:12.772Z,1513227072.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:13.146Z,1513227073.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:13.165Z,1513227073.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:13.548Z,1513227073.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:13.563Z,1513227073.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:13.932Z,1513227073.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:13.967Z,1513227073.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:14.331Z,1513227074.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:14.370Z,1513227074.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:14.764Z,1513227074.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:14.783Z,1513227074.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:15.128Z,1513227075.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:15.144Z,1513227075.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:15.542Z,1513227075.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:15.575Z,1513227075.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:15.946Z,1513227075.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:15.972Z,1513227075.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:16.347Z,1513227076.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:16.379Z,1513227076.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:16.769Z,1513227076.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:16.784Z,1513227076.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:17.161Z,1513227077.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:17.192Z,1513227077.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:17.531Z,1513227077.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:17.549Z,1513227077.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:17.932Z,1513227077.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:17.948Z,1513227077.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:18.331Z,1513227078.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:18.352Z,1513227078.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:18.767Z,1513227078.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:18.809Z,1513227078.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:19.141Z,1513227079.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:19.164Z,1513227079.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:19.546Z,1513227079.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:19.568Z,1513227079.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:19.935Z,1513227079.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:19.951Z,1513227079.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:20.346Z,1513227080.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:20.395Z,1513227080.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:20.767Z,1513227080.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:20.815Z,1513227080.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:21.134Z,1513227081.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:21.158Z,1513227081.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:21.542Z,1513227081.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:21.558Z,1513227081.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:21.950Z,1513227081.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:21.973Z,1513227081.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:22.351Z,1513227082.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:22.370Z,1513227082.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:22.776Z,1513227082.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:22.838Z,1513227082.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:29.797Z,1513227089.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:29.806Z,1513227089.806 [BPC1](ERROR): Failed to receive battery data
2017-12-14T04:51:29.806Z,1513227089.806 [BPC1] Communications Fault, FailCount= 1
2017-12-14T04:51:29.806Z,1513227089.806 [BPC1](ERROR): Communications Fault
2017-12-14T04:51:29.843Z,1513227089.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:29.843Z,1513227089.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2017-12-14T04:51:29.843Z,1513227089.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:51:29.849Z,1513227089.849 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:29.849Z,1513227089.849 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2017-12-14T04:51:29.849Z,1513227089.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:51:29.851Z,1513227089.851 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:29.851Z,1513227089.851 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2017-12-14T04:51:29.851Z,1513227089.851 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:51:29.880Z,1513227089.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:51:29.880Z,1513227089.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:51:29.880Z,1513227089.880 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:51:29.905Z,1513227089.905 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T04:51:29.953Z,1513227089.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:30.074Z,1513227090.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:51:30.074Z,1513227090.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2017-12-14T04:51:30.075Z,1513227090.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:51:30.075Z,1513227090.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2017-12-14T04:51:30.075Z,1513227090.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:51:30.075Z,1513227090.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2017-12-14T04:51:30.429Z,1513227090.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:30.529Z,1513227090.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:51:30.530Z,1513227090.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:51:30.530Z,1513227090.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:51:30.530Z,1513227090.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:51:30.531Z,1513227090.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:51:30.531Z,1513227090.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:51:30.531Z,1513227090.531 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:51:30.532Z,1513227090.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:51:30.532Z,1513227090.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:51:30.783Z,1513227090.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:30.803Z,1513227090.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:30.823Z,1513227090.823 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:51:30.823Z,1513227090.823 [BPC1] No Fault, FailCount= 1
2017-12-14T04:51:31.197Z,1513227091.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:31.274Z,1513227091.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:31.548Z,1513227091.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:31.563Z,1513227091.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:31.951Z,1513227091.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:31.966Z,1513227091.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:32.344Z,1513227092.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:32.379Z,1513227092.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:32.783Z,1513227092.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:32.813Z,1513227092.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:33.200Z,1513227093.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:33.240Z,1513227093.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:33.574Z,1513227093.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:33.595Z,1513227093.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:33.950Z,1513227093.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:33.990Z,1513227093.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:34.347Z,1513227094.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:34.444Z,1513227094.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:34.754Z,1513227094.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:34.806Z,1513227094.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:35.149Z,1513227095.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:35.172Z,1513227095.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:35.563Z,1513227095.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:35.583Z,1513227095.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:35.966Z,1513227095.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:35.998Z,1513227095.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:36.367Z,1513227096.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:36.430Z,1513227096.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:36.792Z,1513227096.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:36.870Z,1513227096.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:37.158Z,1513227097.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:37.213Z,1513227097.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:37.566Z,1513227097.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:37.603Z,1513227097.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:37.941Z,1513227097.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:37.980Z,1513227097.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:38.361Z,1513227098.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:38.389Z,1513227098.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:38.755Z,1513227098.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:38.826Z,1513227098.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:39.156Z,1513227099.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:39.185Z,1513227099.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:39.542Z,1513227099.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:39.603Z,1513227099.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:39.950Z,1513227099.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:40.003Z,1513227100.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:40.364Z,1513227100.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:40.405Z,1513227100.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:40.760Z,1513227100.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:40.799Z,1513227100.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:41.163Z,1513227101.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:41.187Z,1513227101.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:41.546Z,1513227101.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:41.587Z,1513227101.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:41.941Z,1513227101.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:41.000Z,1513227102.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:42.352Z,1513227102.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:42.396Z,1513227102.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:42.775Z,1513227102.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:42.801Z,1513227102.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:43.154Z,1513227103.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:43.181Z,1513227103.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:43.544Z,1513227103.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:43.560Z,1513227103.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:43.949Z,1513227103.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:43.964Z,1513227103.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:44.362Z,1513227104.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:44.393Z,1513227104.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:44.767Z,1513227104.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:44.791Z,1513227104.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:45.162Z,1513227105.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:45.193Z,1513227105.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:45.544Z,1513227105.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:45.563Z,1513227105.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:45.948Z,1513227105.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:45.963Z,1513227105.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:46.359Z,1513227106.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:46.375Z,1513227106.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:46.808Z,1513227106.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:46.828Z,1513227106.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:47.159Z,1513227107.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:47.174Z,1513227107.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:47.540Z,1513227107.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:47.576Z,1513227107.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:47.979Z,1513227107.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:47.995Z,1513227107.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:48.354Z,1513227108.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:48.387Z,1513227108.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:48.770Z,1513227108.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:48.785Z,1513227108.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:49.150Z,1513227109.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:49.189Z,1513227109.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:49.544Z,1513227109.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:49.579Z,1513227109.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:49.948Z,1513227109.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:50.011Z,1513227110.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:50.365Z,1513227110.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:50.395Z,1513227110.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:50.803Z,1513227110.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:50.835Z,1513227110.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:51.166Z,1513227111.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:51.195Z,1513227111.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:51.543Z,1513227111.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:51.599Z,1513227111.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:51.946Z,1513227111.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:52.007Z,1513227112.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:52.366Z,1513227112.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:52.381Z,1513227112.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:52.764Z,1513227112.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:52.818Z,1513227112.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:53.169Z,1513227113.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:53.196Z,1513227113.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:53.567Z,1513227113.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:53.626Z,1513227113.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:53.945Z,1513227113.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:53.964Z,1513227113.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:54.362Z,1513227114.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:54.398Z,1513227114.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:54.755Z,1513227114.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:54.770Z,1513227114.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:55.152Z,1513227115.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:55.171Z,1513227115.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:55.552Z,1513227115.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:55.567Z,1513227115.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:55.950Z,1513227115.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:55.965Z,1513227115.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:56.369Z,1513227116.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:56.400Z,1513227116.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:56.774Z,1513227116.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:56.803Z,1513227116.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:57.155Z,1513227117.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:57.171Z,1513227117.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:57.554Z,1513227117.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:57.570Z,1513227117.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:57.951Z,1513227117.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:57.966Z,1513227117.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:58.355Z,1513227118.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:58.371Z,1513227118.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:58.760Z,1513227118.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:58.798Z,1513227118.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:59.154Z,1513227119.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:59.170Z,1513227119.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:59.588Z,1513227119.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:59.623Z,1513227119.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:51:59.946Z,1513227119.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:51:59.974Z,1513227119.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:00.365Z,1513227120.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:00.422Z,1513227120.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:00.767Z,1513227120.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:00.783Z,1513227120.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:01.162Z,1513227121.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:01.182Z,1513227121.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:01.540Z,1513227121.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:01.571Z,1513227121.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:01.940Z,1513227121.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:02.007Z,1513227122.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:02.364Z,1513227122.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:02.380Z,1513227122.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:02.767Z,1513227122.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:02.783Z,1513227122.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:03.167Z,1513227123.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:03.182Z,1513227123.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:03.539Z,1513227123.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:03.579Z,1513227123.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:03.942Z,1513227123.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:03.969Z,1513227123.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:04.364Z,1513227124.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:04.379Z,1513227124.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:04.806Z,1513227124.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:04.844Z,1513227124.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:05.158Z,1513227125.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:05.191Z,1513227125.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:05.544Z,1513227125.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:05.560Z,1513227125.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:05.943Z,1513227125.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:05.963Z,1513227125.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:06.362Z,1513227126.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:06.392Z,1513227126.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:06.763Z,1513227126.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:06.797Z,1513227126.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:07.154Z,1513227127.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:07.169Z,1513227127.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:07.548Z,1513227127.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:07.562Z,1513227127.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:07.949Z,1513227127.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:07.964Z,1513227127.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:08.362Z,1513227128.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:08.395Z,1513227128.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:08.759Z,1513227128.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:08.773Z,1513227128.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:09.154Z,1513227129.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:09.170Z,1513227129.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:09.546Z,1513227129.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:09.565Z,1513227129.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:09.938Z,1513227129.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:09.974Z,1513227129.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:10.368Z,1513227130.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:10.383Z,1513227130.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:10.780Z,1513227130.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:10.811Z,1513227130.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:11.154Z,1513227131.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:11.189Z,1513227131.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:11.544Z,1513227131.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:11.571Z,1513227131.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:11.939Z,1513227131.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:11.971Z,1513227131.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:12.354Z,1513227132.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:12.378Z,1513227132.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:12.804Z,1513227132.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:12.839Z,1513227132.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:13.165Z,1513227133.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:13.187Z,1513227133.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:13.540Z,1513227133.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:13.581Z,1513227133.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:13.940Z,1513227133.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:13.999Z,1513227133.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:14.343Z,1513227134.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:14.400Z,1513227134.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:14.765Z,1513227134.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:14.780Z,1513227134.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:15.155Z,1513227135.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:15.191Z,1513227135.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:15.555Z,1513227135.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:15.622Z,1513227135.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:15.943Z,1513227135.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:15.994Z,1513227135.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:16.356Z,1513227136.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:16.425Z,1513227136.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:16.750Z,1513227136.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:16.783Z,1513227136.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:17.151Z,1513227137.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:17.166Z,1513227137.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:17.558Z,1513227137.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:17.581Z,1513227137.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:17.963Z,1513227137.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:17.995Z,1513227137.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:18.354Z,1513227138.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:18.370Z,1513227138.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:18.801Z,1513227138.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:18.820Z,1513227138.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:19.150Z,1513227139.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:19.188Z,1513227139.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:19.552Z,1513227139.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:19.579Z,1513227139.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:19.944Z,1513227139.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:19.980Z,1513227139.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:20.350Z,1513227140.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:20.399Z,1513227140.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:20.753Z,1513227140.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:20.780Z,1513227140.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:21.175Z,1513227141.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:21.191Z,1513227141.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:21.550Z,1513227141.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:21.572Z,1513227141.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:21.951Z,1513227141.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:21.966Z,1513227141.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:22.382Z,1513227142.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:22.406Z,1513227142.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:22.767Z,1513227142.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:22.782Z,1513227142.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:26.233Z,1513227146.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:26.284Z,1513227146.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:26.380Z,1513227146.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:26.409Z,1513227146.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:26.764Z,1513227146.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:26.798Z,1513227146.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:27.167Z,1513227147.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:27.187Z,1513227147.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:27.567Z,1513227147.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:27.582Z,1513227147.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:27.965Z,1513227147.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:27.980Z,1513227147.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:28.378Z,1513227148.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:28.410Z,1513227148.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:28.812Z,1513227148.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:28.860Z,1513227148.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:29.175Z,1513227149.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:29.207Z,1513227149.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:29.560Z,1513227149.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:29.587Z,1513227149.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:29.957Z,1513227149.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:29.991Z,1513227149.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:30.373Z,1513227150.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:30.394Z,1513227150.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:30.778Z,1513227150.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:30.810Z,1513227150.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:31.178Z,1513227151.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:31.193Z,1513227151.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:31.556Z,1513227151.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:31.586Z,1513227151.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:31.997Z,1513227151.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:32.047Z,1513227152.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:32.366Z,1513227152.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:32.407Z,1513227152.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:32.810Z,1513227152.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:32.843Z,1513227152.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:33.171Z,1513227153.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:33.188Z,1513227153.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:33.563Z,1513227153.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:33.591Z,1513227153.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:33.974Z,1513227153.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:33.988Z,1513227153.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:34.380Z,1513227154.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:34.395Z,1513227154.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:34.776Z,1513227154.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:34.799Z,1513227154.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:35.193Z,1513227155.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:35.220Z,1513227155.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:35.567Z,1513227155.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:35.598Z,1513227155.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:35.965Z,1513227155.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:36.002Z,1513227156.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:36.374Z,1513227156.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:36.396Z,1513227156.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:36.775Z,1513227156.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:36.799Z,1513227156.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:37.176Z,1513227157.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:37.200Z,1513227157.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:37.561Z,1513227157.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:37.579Z,1513227157.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:37.961Z,1513227157.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:38.022Z,1513227158.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:38.339Z,1513227158.339 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T04:52:38.339Z,1513227158.339 [NAL9602] Data Fault, FailCount= 4
2017-12-14T04:52:38.339Z,1513227158.339 [NAL9602](ERROR): Data Fault
2017-12-14T04:52:38.381Z,1513227158.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:38.456Z,1513227158.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:38.478Z,1513227158.478 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T04:52:38.742Z,1513227158.742 [NAL9602](INFO): Powering down
2017-12-14T04:52:38.762Z,1513227158.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:38.806Z,1513227158.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:39.163Z,1513227159.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:39.219Z,1513227159.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:39.560Z,1513227159.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:39.575Z,1513227159.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:39.612Z,1513227159.612 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T04:52:39.612Z,1513227159.612 [NAL9602] No Fault, FailCount= 4
2017-12-14T04:52:39.960Z,1513227159.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:40.001Z,1513227160.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:40.359Z,1513227160.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:40.456Z,1513227160.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:40.762Z,1513227160.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:40.780Z,1513227160.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:41.163Z,1513227161.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:41.179Z,1513227161.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:41.556Z,1513227161.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:41.571Z,1513227161.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:41.964Z,1513227161.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:41.979Z,1513227161.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:42.362Z,1513227162.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:42.380Z,1513227162.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:42.765Z,1513227162.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:42.785Z,1513227162.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:43.165Z,1513227163.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:43.180Z,1513227163.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:43.564Z,1513227163.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:43.578Z,1513227163.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:43.962Z,1513227163.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:43.977Z,1513227163.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:44.362Z,1513227164.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:44.389Z,1513227164.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:44.775Z,1513227164.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:44.823Z,1513227164.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:45.168Z,1513227165.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:45.192Z,1513227165.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:45.568Z,1513227165.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:45.583Z,1513227165.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:45.964Z,1513227165.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:45.979Z,1513227165.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:46.363Z,1513227166.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:46.377Z,1513227166.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:46.805Z,1513227166.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:46.828Z,1513227166.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:47.159Z,1513227167.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:47.182Z,1513227167.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:47.560Z,1513227167.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:47.575Z,1513227167.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:47.967Z,1513227167.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:47.982Z,1513227167.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:48.353Z,1513227168.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:48.416Z,1513227168.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:48.753Z,1513227168.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:48.783Z,1513227168.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:49.174Z,1513227169.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:49.190Z,1513227169.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:49.555Z,1513227169.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:49.588Z,1513227169.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:49.979Z,1513227169.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:50.031Z,1513227170.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:50.355Z,1513227170.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:50.390Z,1513227170.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:50.767Z,1513227170.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:50.782Z,1513227170.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:51.202Z,1513227171.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:51.238Z,1513227171.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:51.563Z,1513227171.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:51.579Z,1513227171.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:51.963Z,1513227171.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:51.977Z,1513227171.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:52.357Z,1513227172.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:52.382Z,1513227172.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:52.767Z,1513227172.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:52.791Z,1513227172.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:53.159Z,1513227173.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:53.184Z,1513227173.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:53.565Z,1513227173.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:53.580Z,1513227173.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:53.963Z,1513227173.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:53.979Z,1513227173.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:54.388Z,1513227174.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:54.415Z,1513227174.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:54.762Z,1513227174.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:54.786Z,1513227174.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:55.166Z,1513227175.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:55.181Z,1513227175.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:55.569Z,1513227175.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:55.584Z,1513227175.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:55.965Z,1513227175.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:55.992Z,1513227175.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:56.356Z,1513227176.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:56.395Z,1513227176.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:56.757Z,1513227176.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:56.807Z,1513227176.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:57.155Z,1513227177.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:57.191Z,1513227177.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:57.600Z,1513227177.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:57.638Z,1513227177.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:57.963Z,1513227177.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:58.003Z,1513227178.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:58.353Z,1513227178.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:58.368Z,1513227178.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:58.757Z,1513227178.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:58.779Z,1513227178.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:59.163Z,1513227179.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:59.179Z,1513227179.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:59.565Z,1513227179.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:59.580Z,1513227179.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:52:59.962Z,1513227179.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:52:59.976Z,1513227179.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:00.365Z,1513227180.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:00.460Z,1513227180.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:00.814Z,1513227180.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:00.869Z,1513227180.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:01.163Z,1513227181.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:01.178Z,1513227181.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:01.565Z,1513227181.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:01.620Z,1513227181.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:01.968Z,1513227181.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:01.983Z,1513227181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:02.369Z,1513227182.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:02.427Z,1513227182.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:02.769Z,1513227182.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:02.784Z,1513227182.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:03.172Z,1513227183.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:03.234Z,1513227183.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:03.567Z,1513227183.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:03.582Z,1513227183.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:03.964Z,1513227183.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:03.978Z,1513227183.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:04.353Z,1513227184.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:04.368Z,1513227184.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:04.758Z,1513227184.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:04.789Z,1513227184.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:05.156Z,1513227185.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:05.175Z,1513227185.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:05.559Z,1513227185.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:05.574Z,1513227185.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:05.961Z,1513227185.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:05.976Z,1513227185.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:06.361Z,1513227186.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:06.376Z,1513227186.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:06.761Z,1513227186.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:06.808Z,1513227186.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:07.163Z,1513227187.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:07.178Z,1513227187.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:07.574Z,1513227187.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:07.595Z,1513227187.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:07.962Z,1513227187.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:08.066Z,1513227188.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:08.366Z,1513227188.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:08.381Z,1513227188.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:08.767Z,1513227188.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:08.787Z,1513227188.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:09.138Z,1513227189.138 [NAL9602](INFO): Powering up NAL9602
2017-12-14T04:53:09.164Z,1513227189.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:09.188Z,1513227189.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:09.574Z,1513227189.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:09.589Z,1513227189.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:09.971Z,1513227189.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:09.985Z,1513227189.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:10.406Z,1513227190.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:10.463Z,1513227190.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:10.765Z,1513227190.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:10.784Z,1513227190.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:11.163Z,1513227191.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:11.182Z,1513227191.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:11.566Z,1513227191.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:11.581Z,1513227191.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:11.964Z,1513227191.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:11.980Z,1513227191.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:12.364Z,1513227192.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:12.384Z,1513227192.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:12.766Z,1513227192.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:12.788Z,1513227192.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:13.167Z,1513227193.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:13.182Z,1513227193.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:13.608Z,1513227193.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:13.640Z,1513227193.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:13.963Z,1513227193.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:13.979Z,1513227193.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:14.361Z,1513227194.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:14.376Z,1513227194.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:14.807Z,1513227194.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:14.839Z,1513227194.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:15.166Z,1513227195.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:15.181Z,1513227195.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:15.564Z,1513227195.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:15.582Z,1513227195.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:15.966Z,1513227195.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:15.982Z,1513227195.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:16.356Z,1513227196.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:16.371Z,1513227196.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:16.787Z,1513227196.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:16.826Z,1513227196.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:17.164Z,1513227197.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:17.179Z,1513227197.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:17.566Z,1513227197.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:17.580Z,1513227197.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:17.970Z,1513227197.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:17.985Z,1513227197.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:18.363Z,1513227198.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:18.379Z,1513227198.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:18.763Z,1513227198.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:18.778Z,1513227198.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:19.164Z,1513227199.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:19.179Z,1513227199.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:19.559Z,1513227199.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:19.582Z,1513227199.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:20.023Z,1513227200.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:20.067Z,1513227200.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:20.338Z,1513227200.338 [NAL9602](INFO): NAL9602 initialized
2017-12-14T04:53:20.357Z,1513227200.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:20.391Z,1513227200.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:20.778Z,1513227200.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:20.799Z,1513227200.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:21.178Z,1513227201.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:21.201Z,1513227201.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:21.578Z,1513227201.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:21.598Z,1513227201.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:21.966Z,1513227201.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:22.024Z,1513227202.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:22.031Z,1513227202.031 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T04:53:22.031Z,1513227202.031 [Default:CheckIn:C.Wait] Stopped
2017-12-14T04:53:22.031Z,1513227202.031 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T04:53:22.031Z,1513227202.031 [Default:CheckIn:D] Running Loop=1
2017-12-14T04:53:22.362Z,1513227202.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:22.416Z,1513227202.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:22.419Z,1513227202.419 [Default:CheckIn:D] Stopped
2017-12-14T04:53:22.419Z,1513227202.419 [Default:CheckIn:E] Running Loop=1
2017-12-14T04:53:22.764Z,1513227202.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:22.801Z,1513227202.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:22.805Z,1513227202.805 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 260.117155 min 
2017-12-14T04:53:22.805Z,1513227202.805 [Default:CheckIn:E] Stopped
2017-12-14T04:53:22.805Z,1513227202.805 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T04:53:22.805Z,1513227202.805 [Default:CheckIn] Stopped
2017-12-14T04:53:22.805Z,1513227202.805 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T04:53:22.806Z,1513227202.806 [Default:CheckIn](INFO): Running loop #26
2017-12-14T04:53:22.806Z,1513227202.806 [Default:CheckIn] Running Loop=26
2017-12-14T04:53:22.806Z,1513227202.806 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T04:53:22.806Z,1513227202.806 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T04:53:26.198Z,1513227206.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:26.245Z,1513227206.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:26.359Z,1513227206.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:26.403Z,1513227206.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:26.763Z,1513227206.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:26.820Z,1513227206.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:27.126Z,1513227207.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:27.161Z,1513227207.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:27.492Z,1513227207.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:27.518Z,1513227207.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:27.906Z,1513227207.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:27.921Z,1513227207.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:28.292Z,1513227208.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:28.328Z,1513227208.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:28.759Z,1513227208.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:28.808Z,1513227208.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:29.116Z,1513227209.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:29.139Z,1513227209.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:29.521Z,1513227209.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:29.535Z,1513227209.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:29.898Z,1513227209.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:29.936Z,1513227209.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:30.299Z,1513227210.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:30.339Z,1513227210.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:30.696Z,1513227210.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:30.711Z,1513227210.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:31.105Z,1513227211.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:31.141Z,1513227211.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:31.514Z,1513227211.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:31.545Z,1513227211.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:31.909Z,1513227211.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:31.924Z,1513227211.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:32.302Z,1513227212.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:32.328Z,1513227212.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:32.735Z,1513227212.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:32.771Z,1513227212.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:33.093Z,1513227213.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:33.120Z,1513227213.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:33.491Z,1513227213.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:33.526Z,1513227213.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:33.892Z,1513227213.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:33.926Z,1513227213.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:34.291Z,1513227214.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:34.326Z,1513227214.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:34.778Z,1513227214.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:34.792Z,1513227214.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:35.117Z,1513227215.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:35.171Z,1513227215.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:35.506Z,1513227215.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:35.536Z,1513227215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:35.919Z,1513227215.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:35.943Z,1513227215.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:36.321Z,1513227216.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:36.343Z,1513227216.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:36.746Z,1513227216.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:36.787Z,1513227216.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:37.103Z,1513227217.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:37.128Z,1513227217.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:37.513Z,1513227217.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:37.540Z,1513227217.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:37.909Z,1513227217.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:37.939Z,1513227217.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:38.310Z,1513227218.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:38.341Z,1513227218.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:38.761Z,1513227218.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:38.784Z,1513227218.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:39.092Z,1513227219.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:39.160Z,1513227219.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:39.491Z,1513227219.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:39.526Z,1513227219.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:39.892Z,1513227219.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:39.924Z,1513227219.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:40.292Z,1513227220.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:40.352Z,1513227220.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:40.771Z,1513227220.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:40.791Z,1513227220.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:41.111Z,1513227221.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:41.134Z,1513227221.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:41.519Z,1513227221.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:41.535Z,1513227221.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:41.888Z,1513227221.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:41.903Z,1513227221.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:42.306Z,1513227222.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:42.379Z,1513227222.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:42.732Z,1513227222.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:42.812Z,1513227222.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:43.103Z,1513227223.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:43.118Z,1513227223.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:43.514Z,1513227223.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:43.548Z,1513227223.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:43.909Z,1513227223.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:43.924Z,1513227223.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:44.314Z,1513227224.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:44.328Z,1513227224.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:44.705Z,1513227224.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:44.720Z,1513227224.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:45.096Z,1513227225.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:45.135Z,1513227225.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:45.501Z,1513227225.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:45.576Z,1513227225.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:45.917Z,1513227225.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:45.933Z,1513227225.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:46.306Z,1513227226.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:46.330Z,1513227226.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:46.717Z,1513227226.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:46.732Z,1513227226.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:47.130Z,1513227227.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:47.146Z,1513227227.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:47.517Z,1513227227.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:47.552Z,1513227227.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:47.899Z,1513227227.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:47.914Z,1513227227.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:48.299Z,1513227228.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:48.315Z,1513227228.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:48.788Z,1513227228.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:48.862Z,1513227228.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:49.103Z,1513227229.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:49.126Z,1513227229.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:49.514Z,1513227229.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:49.563Z,1513227229.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:49.914Z,1513227229.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:49.928Z,1513227229.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:50.306Z,1513227230.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:50.325Z,1513227230.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:50.761Z,1513227230.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:50.785Z,1513227230.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:51.104Z,1513227231.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:51.120Z,1513227231.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:51.508Z,1513227231.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:51.527Z,1513227231.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:51.891Z,1513227231.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:51.917Z,1513227231.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:52.291Z,1513227232.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:52.327Z,1513227232.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:52.758Z,1513227232.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:52.787Z,1513227232.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:53.118Z,1513227233.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:53.133Z,1513227233.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:53.511Z,1513227233.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:53.536Z,1513227233.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:53.891Z,1513227233.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:53.917Z,1513227233.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:54.308Z,1513227234.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:54.323Z,1513227234.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:54.757Z,1513227234.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:54.783Z,1513227234.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:55.118Z,1513227235.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:55.144Z,1513227235.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:55.510Z,1513227235.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:55.526Z,1513227235.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:55.914Z,1513227235.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:55.928Z,1513227235.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:56.310Z,1513227236.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:56.329Z,1513227236.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:56.695Z,1513227236.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:56.784Z,1513227236.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:57.096Z,1513227237.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:57.127Z,1513227237.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:57.504Z,1513227237.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:57.519Z,1513227237.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:57.903Z,1513227237.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:57.949Z,1513227237.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:58.339Z,1513227238.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:58.382Z,1513227238.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:58.710Z,1513227238.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:58.725Z,1513227238.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:59.107Z,1513227239.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:59.139Z,1513227239.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:59.519Z,1513227239.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:59.533Z,1513227239.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:53:59.895Z,1513227239.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:53:59.926Z,1513227239.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:00.291Z,1513227240.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:00.305Z,1513227240.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:00.696Z,1513227240.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:00.710Z,1513227240.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:01.115Z,1513227241.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:01.146Z,1513227241.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:01.548Z,1513227241.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:01.584Z,1513227241.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:01.909Z,1513227241.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:01.939Z,1513227241.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:02.305Z,1513227242.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:02.336Z,1513227242.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:02.750Z,1513227242.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:02.793Z,1513227242.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:03.108Z,1513227243.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:03.143Z,1513227243.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:03.501Z,1513227243.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:03.516Z,1513227243.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:03.900Z,1513227243.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:03.921Z,1513227243.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:04.304Z,1513227244.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:04.320Z,1513227244.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:04.788Z,1513227244.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:04.827Z,1513227244.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:05.122Z,1513227245.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:05.140Z,1513227245.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:05.515Z,1513227245.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:05.535Z,1513227245.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:05.897Z,1513227245.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:05.924Z,1513227245.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:06.291Z,1513227246.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:06.324Z,1513227246.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:06.747Z,1513227246.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:06.783Z,1513227246.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:07.095Z,1513227247.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:07.127Z,1513227247.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:07.510Z,1513227247.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:07.537Z,1513227247.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:07.921Z,1513227247.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:07.935Z,1513227247.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:08.327Z,1513227248.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:08.343Z,1513227248.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:08.753Z,1513227248.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:08.791Z,1513227248.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:09.107Z,1513227249.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:09.123Z,1513227249.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:09.503Z,1513227249.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:09.518Z,1513227249.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:09.901Z,1513227249.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:09.944Z,1513227249.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:10.307Z,1513227250.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:10.327Z,1513227250.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:10.720Z,1513227250.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:10.802Z,1513227250.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:11.126Z,1513227251.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:11.179Z,1513227251.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:11.514Z,1513227251.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:11.530Z,1513227251.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:11.888Z,1513227251.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:11.944Z,1513227251.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:12.304Z,1513227252.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:12.318Z,1513227252.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:12.706Z,1513227252.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:12.727Z,1513227252.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:13.101Z,1513227253.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:13.132Z,1513227253.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:13.510Z,1513227253.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:13.535Z,1513227253.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:13.909Z,1513227253.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:13.939Z,1513227253.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:14.324Z,1513227254.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:14.360Z,1513227254.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:14.701Z,1513227254.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:14.715Z,1513227254.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:15.162Z,1513227255.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:15.197Z,1513227255.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:15.505Z,1513227255.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:15.546Z,1513227255.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:15.896Z,1513227255.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:15.913Z,1513227255.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:16.299Z,1513227256.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:16.320Z,1513227256.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:16.760Z,1513227256.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:16.796Z,1513227256.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:17.112Z,1513227257.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:17.143Z,1513227257.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:17.522Z,1513227257.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:17.562Z,1513227257.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:17.899Z,1513227257.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:17.920Z,1513227257.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:18.302Z,1513227258.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:18.317Z,1513227258.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:18.755Z,1513227258.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:18.790Z,1513227258.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:19.095Z,1513227259.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:19.135Z,1513227259.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:19.516Z,1513227259.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:19.530Z,1513227259.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:19.914Z,1513227259.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:19.934Z,1513227259.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:20.317Z,1513227260.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:20.374Z,1513227260.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:20.757Z,1513227260.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:20.851Z,1513227260.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:21.103Z,1513227261.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:21.119Z,1513227261.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:21.493Z,1513227261.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:21.508Z,1513227261.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:21.906Z,1513227261.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:21.933Z,1513227261.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:22.303Z,1513227262.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:22.317Z,1513227262.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:22.784Z,1513227262.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:22.800Z,1513227262.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:23.109Z,1513227263.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:23.124Z,1513227263.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:26.526Z,1513227266.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:26.571Z,1513227266.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:26.668Z,1513227266.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:26.696Z,1513227266.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:27.103Z,1513227267.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:27.128Z,1513227267.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:27.459Z,1513227267.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:27.488Z,1513227267.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:27.864Z,1513227267.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:27.879Z,1513227267.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:28.260Z,1513227268.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:28.279Z,1513227268.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:28.670Z,1513227268.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:28.685Z,1513227268.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:29.109Z,1513227269.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:29.124Z,1513227269.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:29.464Z,1513227269.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:29.484Z,1513227269.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:29.860Z,1513227269.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:29.875Z,1513227269.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:30.260Z,1513227270.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:30.279Z,1513227270.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:30.686Z,1513227270.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:30.757Z,1513227270.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:30.757Z,1513227270.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2017-12-14T04:54:30.758Z,1513227270.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:54:30.759Z,1513227270.759 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:30.759Z,1513227270.759 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2017-12-14T04:54:30.760Z,1513227270.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:54:30.786Z,1513227270.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:30.786Z,1513227270.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2017-12-14T04:54:30.786Z,1513227270.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:54:30.806Z,1513227270.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:54:30.806Z,1513227270.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:54:30.807Z,1513227270.807 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:54:31.059Z,1513227271.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:31.171Z,1513227271.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:54:31.171Z,1513227271.171 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2017-12-14T04:54:31.171Z,1513227271.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:54:31.171Z,1513227271.171 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2017-12-14T04:54:31.172Z,1513227271.172 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:54:31.172Z,1513227271.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2017-12-14T04:54:31.463Z,1513227271.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:31.482Z,1513227271.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:54:31.482Z,1513227271.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:54:31.482Z,1513227271.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:54:31.483Z,1513227271.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:54:31.483Z,1513227271.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:54:31.484Z,1513227271.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:54:31.484Z,1513227271.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:54:31.484Z,1513227271.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:54:31.485Z,1513227271.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:54:31.869Z,1513227271.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:31.884Z,1513227271.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:32.269Z,1513227272.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:32.314Z,1513227272.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:32.701Z,1513227272.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:32.760Z,1513227272.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:33.054Z,1513227273.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:33.105Z,1513227273.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:33.459Z,1513227273.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:33.498Z,1513227273.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:33.854Z,1513227273.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:33.869Z,1513227273.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:34.257Z,1513227274.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:34.273Z,1513227274.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:34.713Z,1513227274.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:34.748Z,1513227274.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:35.076Z,1513227275.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:35.095Z,1513227275.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:35.471Z,1513227275.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:35.492Z,1513227275.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:35.865Z,1513227275.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:35.879Z,1513227275.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:36.249Z,1513227276.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:36.289Z,1513227276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:36.713Z,1513227276.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:36.755Z,1513227276.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:37.059Z,1513227277.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:37.073Z,1513227277.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:37.517Z,1513227277.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:37.554Z,1513227277.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:37.866Z,1513227277.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:37.881Z,1513227277.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:38.273Z,1513227278.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:38.305Z,1513227278.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:38.661Z,1513227278.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:38.676Z,1513227278.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:39.059Z,1513227279.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:39.075Z,1513227279.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:39.458Z,1513227279.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:39.484Z,1513227279.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:39.862Z,1513227279.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:39.877Z,1513227279.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:40.260Z,1513227280.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:40.275Z,1513227280.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:40.709Z,1513227280.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:40.736Z,1513227280.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:41.109Z,1513227281.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:41.170Z,1513227281.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:41.476Z,1513227281.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:41.518Z,1513227281.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:41.860Z,1513227281.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:41.874Z,1513227281.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:42.261Z,1513227282.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:42.276Z,1513227282.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:42.660Z,1513227282.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:42.674Z,1513227282.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:43.101Z,1513227283.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:43.126Z,1513227283.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:43.474Z,1513227283.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:43.488Z,1513227283.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:43.918Z,1513227283.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:43.964Z,1513227283.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:44.270Z,1513227284.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:44.285Z,1513227284.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:44.688Z,1513227284.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:44.810Z,1513227284.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:45.057Z,1513227285.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:45.072Z,1513227285.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:45.452Z,1513227285.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:45.467Z,1513227285.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:45.852Z,1513227285.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:45.867Z,1513227285.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:46.258Z,1513227286.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:46.296Z,1513227286.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:46.704Z,1513227286.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:46.745Z,1513227286.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:47.112Z,1513227287.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:47.156Z,1513227287.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:47.477Z,1513227287.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:47.508Z,1513227287.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:47.865Z,1513227287.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:47.880Z,1513227287.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:48.264Z,1513227288.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:48.280Z,1513227288.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:48.717Z,1513227288.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:48.756Z,1513227288.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:49.060Z,1513227289.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:49.075Z,1513227289.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:49.470Z,1513227289.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:49.485Z,1513227289.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:49.869Z,1513227289.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:49.884Z,1513227289.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:50.291Z,1513227290.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:50.323Z,1513227290.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:50.688Z,1513227290.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:50.753Z,1513227290.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:51.056Z,1513227291.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:51.071Z,1513227291.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:51.462Z,1513227291.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:51.473Z,1513227291.473 [BPC1](ERROR): Failed to parse message.
2017-12-14T04:54:51.473Z,1513227291.473 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T04:54:51.473Z,1513227291.473 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:54:51.473Z,1513227291.473 [BPC1](ERROR): Data Fault
2017-12-14T04:54:51.508Z,1513227291.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:51.534Z,1513227291.534 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:54:51.859Z,1513227291.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:51.875Z,1513227291.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:52.260Z,1513227292.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:52.275Z,1513227292.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:52.673Z,1513227292.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:52.761Z,1513227292.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:52.797Z,1513227292.797 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:54:52.797Z,1513227292.797 [BPC1] No Fault, FailCount= 1
2017-12-14T04:54:53.074Z,1513227293.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:53.147Z,1513227293.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:53.490Z,1513227293.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:53.527Z,1513227293.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:53.872Z,1513227293.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:53.887Z,1513227293.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:54.251Z,1513227294.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:54.279Z,1513227294.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:54.652Z,1513227294.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:54.683Z,1513227294.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:55.083Z,1513227295.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:55.109Z,1513227295.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:55.474Z,1513227295.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:55.495Z,1513227295.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:55.874Z,1513227295.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:55.889Z,1513227295.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:56.269Z,1513227296.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:56.299Z,1513227296.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:56.674Z,1513227296.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:56.712Z,1513227296.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:57.090Z,1513227297.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:57.125Z,1513227297.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:57.458Z,1513227297.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:57.479Z,1513227297.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:57.857Z,1513227297.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:57.873Z,1513227297.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:58.256Z,1513227298.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:58.271Z,1513227298.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:58.711Z,1513227298.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:58.751Z,1513227298.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:59.069Z,1513227299.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:59.102Z,1513227299.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:59.474Z,1513227299.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:59.509Z,1513227299.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:54:59.883Z,1513227299.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:54:59.910Z,1513227299.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:00.259Z,1513227300.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:00.275Z,1513227300.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:00.693Z,1513227300.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:00.760Z,1513227300.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:01.048Z,1513227301.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:01.063Z,1513227301.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:01.468Z,1513227301.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:01.534Z,1513227301.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:01.880Z,1513227301.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:01.895Z,1513227301.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:02.283Z,1513227302.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:02.298Z,1513227302.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:02.666Z,1513227302.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:02.752Z,1513227302.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:03.076Z,1513227303.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:03.126Z,1513227303.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:03.459Z,1513227303.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:03.479Z,1513227303.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:03.865Z,1513227303.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:03.880Z,1513227303.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:04.261Z,1513227304.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:04.276Z,1513227304.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:04.720Z,1513227304.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:04.747Z,1513227304.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:05.070Z,1513227305.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:05.105Z,1513227305.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:05.474Z,1513227305.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:05.504Z,1513227305.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:05.857Z,1513227305.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:05.871Z,1513227305.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:06.283Z,1513227306.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:06.322Z,1513227306.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:06.659Z,1513227306.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:06.679Z,1513227306.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:07.051Z,1513227307.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:07.087Z,1513227307.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:07.475Z,1513227307.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:07.491Z,1513227307.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:07.873Z,1513227307.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:07.895Z,1513227307.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:08.274Z,1513227308.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:08.292Z,1513227308.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:08.652Z,1513227308.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:08.683Z,1513227308.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:09.101Z,1513227309.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:09.132Z,1513227309.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:09.491Z,1513227309.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:09.538Z,1513227309.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:09.856Z,1513227309.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:09.887Z,1513227309.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:10.264Z,1513227310.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:10.278Z,1513227310.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:10.666Z,1513227310.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:10.681Z,1513227310.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:11.091Z,1513227311.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:11.118Z,1513227311.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:11.476Z,1513227311.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:11.563Z,1513227311.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:11.860Z,1513227311.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:11.876Z,1513227311.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:12.258Z,1513227312.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:12.347Z,1513227312.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:12.767Z,1513227312.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:12.808Z,1513227312.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:13.062Z,1513227313.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:13.077Z,1513227313.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:13.475Z,1513227313.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:13.523Z,1513227313.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:13.873Z,1513227313.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:13.904Z,1513227313.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:14.263Z,1513227314.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:14.308Z,1513227314.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:14.686Z,1513227314.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:14.753Z,1513227314.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:15.072Z,1513227315.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:15.087Z,1513227315.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:15.464Z,1513227315.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:15.479Z,1513227315.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:15.854Z,1513227315.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:15.890Z,1513227315.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:16.251Z,1513227316.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:16.278Z,1513227316.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:16.710Z,1513227316.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:16.759Z,1513227316.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:17.074Z,1513227317.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:17.100Z,1513227317.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:17.466Z,1513227317.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:17.495Z,1513227317.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:17.854Z,1513227317.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:17.868Z,1513227317.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:18.257Z,1513227318.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:18.285Z,1513227318.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:18.675Z,1513227318.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:18.757Z,1513227318.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:19.093Z,1513227319.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:19.134Z,1513227319.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:19.474Z,1513227319.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:19.504Z,1513227319.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:19.861Z,1513227319.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:19.876Z,1513227319.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:20.269Z,1513227320.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:20.292Z,1513227320.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:20.651Z,1513227320.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:20.675Z,1513227320.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:21.054Z,1513227321.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:21.094Z,1513227321.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:21.463Z,1513227321.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:21.519Z,1513227321.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:21.860Z,1513227321.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:21.875Z,1513227321.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:22.288Z,1513227322.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:22.310Z,1513227322.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:22.676Z,1513227322.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:22.731Z,1513227322.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:23.107Z,1513227323.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:23.135Z,1513227323.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:23.476Z,1513227323.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:23.492Z,1513227323.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:26.945Z,1513227326.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:26.978Z,1513227326.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:27.064Z,1513227327.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:27.099Z,1513227327.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:27.444Z,1513227327.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:27.459Z,1513227327.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:27.854Z,1513227327.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:27.869Z,1513227327.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:28.246Z,1513227328.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:28.261Z,1513227328.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:28.628Z,1513227328.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:28.764Z,1513227328.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:29.040Z,1513227329.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:29.075Z,1513227329.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:29.430Z,1513227329.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:29.446Z,1513227329.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:29.834Z,1513227329.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:29.848Z,1513227329.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:30.230Z,1513227330.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:30.245Z,1513227330.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:30.642Z,1513227330.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:30.769Z,1513227330.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:31.051Z,1513227331.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:31.075Z,1513227331.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:31.455Z,1513227331.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:31.479Z,1513227331.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:31.824Z,1513227331.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:31.859Z,1513227331.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:32.234Z,1513227332.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:32.249Z,1513227332.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:32.635Z,1513227332.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:32.725Z,1513227332.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:33.041Z,1513227333.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:33.058Z,1513227333.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:33.444Z,1513227333.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:33.510Z,1513227333.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:33.851Z,1513227333.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:33.915Z,1513227333.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:34.247Z,1513227334.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:34.264Z,1513227334.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:34.627Z,1513227334.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:34.676Z,1513227334.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:35.063Z,1513227335.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:35.115Z,1513227335.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:35.430Z,1513227335.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:35.498Z,1513227335.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:35.823Z,1513227335.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:35.856Z,1513227335.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:36.220Z,1513227336.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:36.252Z,1513227336.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:36.646Z,1513227336.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:36.662Z,1513227336.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:37.073Z,1513227337.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:37.101Z,1513227337.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:37.445Z,1513227337.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:37.472Z,1513227337.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:37.835Z,1513227337.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:37.870Z,1513227337.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:38.261Z,1513227338.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:38.327Z,1513227338.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:38.636Z,1513227338.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:38.671Z,1513227338.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:39.078Z,1513227339.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:39.100Z,1513227339.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:39.434Z,1513227339.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:39.449Z,1513227339.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:39.837Z,1513227339.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:39.851Z,1513227339.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:40.246Z,1513227340.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:40.279Z,1513227340.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:40.631Z,1513227340.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:40.645Z,1513227340.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:41.023Z,1513227341.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:41.060Z,1513227341.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:41.467Z,1513227341.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:41.515Z,1513227341.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:41.823Z,1513227341.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:41.858Z,1513227341.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:42.217Z,1513227342.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:42.232Z,1513227342.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:42.638Z,1513227342.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:42.743Z,1513227342.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:43.046Z,1513227343.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:43.075Z,1513227343.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:43.441Z,1513227343.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:43.474Z,1513227343.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:43.835Z,1513227343.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:43.894Z,1513227343.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:44.231Z,1513227344.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:44.246Z,1513227344.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:44.678Z,1513227344.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:44.765Z,1513227344.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:45.039Z,1513227345.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:45.059Z,1513227345.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:45.437Z,1513227345.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:45.452Z,1513227345.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:45.841Z,1513227345.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:45.856Z,1513227345.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:46.238Z,1513227346.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:46.253Z,1513227346.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:46.635Z,1513227346.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:46.695Z,1513227346.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:47.023Z,1513227347.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:47.051Z,1513227347.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:47.424Z,1513227347.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:47.459Z,1513227347.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:47.829Z,1513227347.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:47.855Z,1513227347.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:48.223Z,1513227348.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:48.261Z,1513227348.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:48.633Z,1513227348.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:48.661Z,1513227348.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:49.045Z,1513227349.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:49.068Z,1513227349.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:49.441Z,1513227349.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:49.472Z,1513227349.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:49.834Z,1513227349.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:49.848Z,1513227349.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:50.228Z,1513227350.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:50.248Z,1513227350.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:50.634Z,1513227350.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:50.648Z,1513227350.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:51.103Z,1513227351.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:51.151Z,1513227351.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:51.454Z,1513227351.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:51.471Z,1513227351.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:51.852Z,1513227351.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:51.875Z,1513227351.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:52.246Z,1513227352.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:52.267Z,1513227352.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:52.623Z,1513227352.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:52.648Z,1513227352.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:53.073Z,1513227353.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:53.096Z,1513227353.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:53.424Z,1513227353.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:53.460Z,1513227353.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:53.828Z,1513227353.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:53.856Z,1513227353.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:54.227Z,1513227354.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:54.256Z,1513227354.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:54.646Z,1513227354.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:54.783Z,1513227354.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:55.053Z,1513227355.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:55.068Z,1513227355.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:55.447Z,1513227355.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:55.511Z,1513227355.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:55.829Z,1513227355.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:55.860Z,1513227355.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:56.229Z,1513227356.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:56.271Z,1513227356.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:56.631Z,1513227356.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:56.696Z,1513227356.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:57.035Z,1513227357.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:57.050Z,1513227357.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:57.446Z,1513227357.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:57.472Z,1513227357.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:57.847Z,1513227357.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:57.867Z,1513227357.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:58.247Z,1513227358.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:58.262Z,1513227358.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:58.624Z,1513227358.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:58.722Z,1513227358.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:59.033Z,1513227359.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:59.047Z,1513227359.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:59.434Z,1513227359.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:59.450Z,1513227359.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:55:59.832Z,1513227359.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:55:59.847Z,1513227359.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:00.231Z,1513227360.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:00.245Z,1513227360.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:00.681Z,1513227360.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:00.750Z,1513227360.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:01.046Z,1513227361.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:01.067Z,1513227361.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:01.462Z,1513227361.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:01.492Z,1513227361.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:01.835Z,1513227361.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:01.852Z,1513227361.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:02.227Z,1513227362.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:02.249Z,1513227362.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:02.619Z,1513227362.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:02.654Z,1513227362.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:03.023Z,1513227363.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:03.059Z,1513227363.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:03.450Z,1513227363.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:03.466Z,1513227363.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:03.848Z,1513227363.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:03.863Z,1513227363.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:04.261Z,1513227364.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:04.318Z,1513227364.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:04.627Z,1513227364.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:04.650Z,1513227364.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:05.074Z,1513227365.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:05.119Z,1513227365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:05.429Z,1513227365.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:05.444Z,1513227365.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:05.835Z,1513227365.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:05.850Z,1513227365.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:06.228Z,1513227366.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:06.243Z,1513227366.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:06.641Z,1513227366.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:06.656Z,1513227366.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:07.106Z,1513227367.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:07.145Z,1513227367.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:07.449Z,1513227367.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:07.464Z,1513227367.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:07.836Z,1513227367.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:07.851Z,1513227367.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:08.227Z,1513227368.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:08.251Z,1513227368.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:08.632Z,1513227368.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:08.648Z,1513227368.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:09.023Z,1513227369.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:09.056Z,1513227369.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:09.450Z,1513227369.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:09.520Z,1513227369.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:09.851Z,1513227369.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:09.865Z,1513227369.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:10.238Z,1513227370.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:10.275Z,1513227370.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:10.639Z,1513227370.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:10.722Z,1513227370.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:11.024Z,1513227371.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:11.060Z,1513227371.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:11.424Z,1513227371.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:11.456Z,1513227371.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:11.828Z,1513227371.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:11.859Z,1513227371.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:12.223Z,1513227372.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:12.259Z,1513227372.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:12.648Z,1513227372.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:12.736Z,1513227372.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:13.051Z,1513227373.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:13.066Z,1513227373.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:13.477Z,1513227373.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:13.504Z,1513227373.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:13.829Z,1513227373.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:13.844Z,1513227373.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:14.227Z,1513227374.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:14.243Z,1513227374.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:14.634Z,1513227374.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:14.648Z,1513227374.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:15.024Z,1513227375.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:15.083Z,1513227375.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:15.443Z,1513227375.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:15.463Z,1513227375.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:15.854Z,1513227375.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:15.868Z,1513227375.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:16.246Z,1513227376.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:16.302Z,1513227376.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:16.648Z,1513227376.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:16.675Z,1513227376.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:17.033Z,1513227377.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:17.087Z,1513227377.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:17.436Z,1513227377.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:17.455Z,1513227377.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:17.836Z,1513227377.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:17.859Z,1513227377.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:18.235Z,1513227378.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:18.250Z,1513227378.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:18.638Z,1513227378.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:18.660Z,1513227378.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:19.090Z,1513227379.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:19.157Z,1513227379.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:19.440Z,1513227379.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:19.498Z,1513227379.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:19.820Z,1513227379.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:19.851Z,1513227379.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:20.243Z,1513227380.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:20.290Z,1513227380.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:20.635Z,1513227380.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:20.679Z,1513227380.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:21.064Z,1513227381.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:21.115Z,1513227381.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:21.450Z,1513227381.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:21.511Z,1513227381.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:21.850Z,1513227381.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:21.877Z,1513227381.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:22.236Z,1513227382.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:22.274Z,1513227382.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:22.700Z,1513227382.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:22.767Z,1513227382.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:23.024Z,1513227383.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:23.094Z,1513227383.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:23.431Z,1513227383.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:23.462Z,1513227383.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:23.832Z,1513227383.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:23.867Z,1513227383.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:29.375Z,1513227389.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:29.420Z,1513227389.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:29.555Z,1513227389.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:29.587Z,1513227389.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:29.888Z,1513227389.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:29.923Z,1513227389.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:30.314Z,1513227390.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:30.329Z,1513227390.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:30.718Z,1513227390.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:30.797Z,1513227390.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:31.067Z,1513227391.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:31.093Z,1513227391.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:31.469Z,1513227391.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:31.584Z,1513227391.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:31.871Z,1513227391.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:31.903Z,1513227391.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:32.269Z,1513227392.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:32.305Z,1513227392.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:32.679Z,1513227392.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:32.720Z,1513227392.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:33.098Z,1513227393.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:33.168Z,1513227393.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:33.506Z,1513227393.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:33.565Z,1513227393.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:33.869Z,1513227393.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:33.899Z,1513227393.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:34.270Z,1513227394.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:34.343Z,1513227394.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:34.671Z,1513227394.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:34.739Z,1513227394.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:35.130Z,1513227395.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:35.167Z,1513227395.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:35.495Z,1513227395.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:35.510Z,1513227395.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:35.888Z,1513227395.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:35.961Z,1513227395.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:36.296Z,1513227396.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:36.333Z,1513227396.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:36.751Z,1513227396.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:36.798Z,1513227396.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:37.107Z,1513227397.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:37.147Z,1513227397.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:37.470Z,1513227397.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:37.505Z,1513227397.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:37.870Z,1513227397.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:37.908Z,1513227397.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:38.270Z,1513227398.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:38.317Z,1513227398.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:38.719Z,1513227398.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:38.775Z,1513227398.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:39.100Z,1513227399.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:39.116Z,1513227399.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:39.500Z,1513227399.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:39.549Z,1513227399.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:39.868Z,1513227399.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:39.975Z,1513227399.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:40.270Z,1513227400.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:40.303Z,1513227400.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:40.769Z,1513227400.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:40.819Z,1513227400.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:41.099Z,1513227401.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:41.123Z,1513227401.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:41.491Z,1513227401.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:41.543Z,1513227401.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:41.890Z,1513227401.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:41.911Z,1513227401.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:42.302Z,1513227402.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:42.317Z,1513227402.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:42.692Z,1513227402.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:42.772Z,1513227402.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:43.073Z,1513227403.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:43.114Z,1513227403.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:43.468Z,1513227403.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:43.523Z,1513227403.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:43.869Z,1513227403.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:43.904Z,1513227403.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:44.268Z,1513227404.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:44.307Z,1513227404.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:44.692Z,1513227404.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:44.769Z,1513227404.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:45.085Z,1513227405.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:45.123Z,1513227405.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:45.486Z,1513227405.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:45.517Z,1513227405.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:45.922Z,1513227405.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:45.936Z,1513227405.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:46.269Z,1513227406.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:46.296Z,1513227406.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:46.675Z,1513227406.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:46.695Z,1513227406.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:47.102Z,1513227407.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:47.137Z,1513227407.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:47.490Z,1513227407.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:47.520Z,1513227407.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:47.881Z,1513227407.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:47.896Z,1513227407.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:48.289Z,1513227408.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:48.320Z,1513227408.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:48.675Z,1513227408.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:48.695Z,1513227408.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:49.106Z,1513227409.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:49.142Z,1513227409.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:49.527Z,1513227409.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:49.547Z,1513227409.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:49.870Z,1513227409.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:49.897Z,1513227409.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:50.254Z,1513227410.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:50.275Z,1513227410.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:50.298Z,1513227410.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:50.732Z,1513227410.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:50.779Z,1513227410.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:51.049Z,1513227411.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:51.084Z,1513227411.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:51.112Z,1513227411.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:51.453Z,1513227411.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:51.499Z,1513227411.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:51.516Z,1513227411.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:51.872Z,1513227411.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:51.937Z,1513227411.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:52.268Z,1513227412.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:52.297Z,1513227412.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:52.741Z,1513227412.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:52.798Z,1513227412.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:53.083Z,1513227413.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:53.098Z,1513227413.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:53.486Z,1513227413.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:53.507Z,1513227413.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:53.886Z,1513227413.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:53.935Z,1513227413.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:54.288Z,1513227414.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:54.303Z,1513227414.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:54.726Z,1513227414.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:54.767Z,1513227414.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:55.082Z,1513227415.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:55.127Z,1513227415.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:55.477Z,1513227415.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:55.492Z,1513227415.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:55.876Z,1513227415.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:55.895Z,1513227415.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:56.276Z,1513227416.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:56.295Z,1513227416.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:56.726Z,1513227416.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:56.756Z,1513227416.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:57.096Z,1513227417.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:57.162Z,1513227417.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:57.518Z,1513227417.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:57.548Z,1513227417.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:57.871Z,1513227417.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:57.896Z,1513227417.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:58.265Z,1513227418.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:58.288Z,1513227418.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:58.671Z,1513227418.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:58.751Z,1513227418.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:59.074Z,1513227419.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:59.105Z,1513227419.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:59.483Z,1513227419.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:59.503Z,1513227419.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:56:59.887Z,1513227419.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:56:59.901Z,1513227419.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:00.282Z,1513227420.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:00.296Z,1513227420.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:00.679Z,1513227420.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:00.694Z,1513227420.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:01.087Z,1513227421.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:01.134Z,1513227421.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:01.479Z,1513227421.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:01.493Z,1513227421.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:01.931Z,1513227421.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:01.946Z,1513227421.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:02.275Z,1513227422.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:02.298Z,1513227422.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:02.335Z,1513227422.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:02.677Z,1513227422.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:02.701Z,1513227422.701 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T04:57:02.701Z,1513227422.701 [BPC1] Data Fault, FailCount= 1
2017-12-14T04:57:02.702Z,1513227422.702 [BPC1](ERROR): Data Fault
2017-12-14T04:57:02.715Z,1513227422.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:02.728Z,1513227422.728 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T04:57:03.100Z,1513227423.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:03.113Z,1513227423.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:03.131Z,1513227423.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:03.489Z,1513227423.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:03.521Z,1513227423.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:03.529Z,1513227423.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:03.875Z,1513227423.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:03.890Z,1513227423.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:03.941Z,1513227423.941 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T04:57:03.941Z,1513227423.941 [BPC1] No Fault, FailCount= 1
2017-12-14T04:57:04.276Z,1513227424.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:04.362Z,1513227424.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:04.738Z,1513227424.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:04.783Z,1513227424.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:05.074Z,1513227425.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:05.088Z,1513227425.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:05.496Z,1513227425.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:05.521Z,1513227425.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:05.881Z,1513227425.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:05.899Z,1513227425.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:06.282Z,1513227426.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:06.296Z,1513227426.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:06.696Z,1513227426.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:06.730Z,1513227426.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:07.073Z,1513227427.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:07.097Z,1513227427.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:07.480Z,1513227427.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:07.536Z,1513227427.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:07.862Z,1513227427.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:07.893Z,1513227427.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:08.280Z,1513227428.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:08.294Z,1513227428.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:08.730Z,1513227428.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:08.774Z,1513227428.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:09.082Z,1513227429.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:09.096Z,1513227429.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:09.490Z,1513227429.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:09.523Z,1513227429.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:09.872Z,1513227429.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:09.887Z,1513227429.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:10.268Z,1513227430.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:10.287Z,1513227430.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:10.693Z,1513227430.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:10.738Z,1513227430.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:11.080Z,1513227431.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:11.149Z,1513227431.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:11.488Z,1513227431.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:11.503Z,1513227431.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:11.895Z,1513227431.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:11.955Z,1513227431.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:12.286Z,1513227432.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:12.313Z,1513227432.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:12.676Z,1513227432.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:12.775Z,1513227432.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:13.077Z,1513227433.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:13.092Z,1513227433.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:13.476Z,1513227433.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:13.496Z,1513227433.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:13.880Z,1513227433.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:13.895Z,1513227433.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:14.275Z,1513227434.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:14.290Z,1513227434.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:14.682Z,1513227434.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:14.698Z,1513227434.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:15.130Z,1513227435.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:15.295Z,1513227435.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:15.487Z,1513227435.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:15.507Z,1513227435.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:15.868Z,1513227435.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:15.896Z,1513227435.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:16.264Z,1513227436.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:16.299Z,1513227436.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:16.667Z,1513227436.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:16.703Z,1513227436.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:17.100Z,1513227437.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:17.132Z,1513227437.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:17.486Z,1513227437.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:17.500Z,1513227437.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:17.890Z,1513227437.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:17.904Z,1513227437.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:18.290Z,1513227438.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:18.310Z,1513227438.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:18.710Z,1513227438.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:18.755Z,1513227438.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:19.077Z,1513227439.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:19.091Z,1513227439.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:19.473Z,1513227439.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:19.496Z,1513227439.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:19.878Z,1513227439.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:19.892Z,1513227439.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:20.276Z,1513227440.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:20.291Z,1513227440.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:20.724Z,1513227440.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:20.755Z,1513227440.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:21.092Z,1513227441.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:21.110Z,1513227441.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:21.496Z,1513227441.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:21.511Z,1513227441.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:21.880Z,1513227441.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:21.910Z,1513227441.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:22.277Z,1513227442.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:22.312Z,1513227442.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:22.728Z,1513227442.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:22.759Z,1513227442.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:23.082Z,1513227443.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:23.099Z,1513227443.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:23.491Z,1513227443.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:23.506Z,1513227443.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:23.890Z,1513227443.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:23.905Z,1513227443.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:27.394Z,1513227447.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:27.483Z,1513227447.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:27.586Z,1513227447.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:27.622Z,1513227447.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:27.967Z,1513227447.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:27.994Z,1513227447.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:28.348Z,1513227448.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:28.399Z,1513227448.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:28.732Z,1513227448.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:28.768Z,1513227448.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:29.131Z,1513227449.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:29.202Z,1513227449.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:29.557Z,1513227449.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:29.571Z,1513227449.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:29.956Z,1513227449.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:29.971Z,1513227449.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:30.357Z,1513227450.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:30.371Z,1513227450.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:30.783Z,1513227450.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:30.820Z,1513227450.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:31.154Z,1513227451.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:31.202Z,1513227451.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:31.531Z,1513227451.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:31.564Z,1513227451.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:31.564Z,1513227451.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2017-12-14T04:57:31.564Z,1513227451.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T04:57:31.567Z,1513227451.567 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:31.567Z,1513227451.567 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2017-12-14T04:57:31.567Z,1513227451.567 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T04:57:31.569Z,1513227451.569 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:31.569Z,1513227451.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2017-12-14T04:57:31.569Z,1513227451.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T04:57:31.582Z,1513227451.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T04:57:31.582Z,1513227451.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T04:57:31.583Z,1513227451.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T04:57:31.931Z,1513227451.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:31.978Z,1513227451.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T04:57:31.978Z,1513227451.978 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2017-12-14T04:57:31.978Z,1513227451.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T04:57:31.979Z,1513227451.979 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2017-12-14T04:57:31.979Z,1513227451.979 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T04:57:31.979Z,1513227451.979 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2017-12-14T04:57:32.330Z,1513227452.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:32.343Z,1513227452.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T04:57:32.344Z,1513227452.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:57:32.344Z,1513227452.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:57:32.344Z,1513227452.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T04:57:32.353Z,1513227452.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:57:32.353Z,1513227452.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:57:32.354Z,1513227452.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T04:57:32.354Z,1513227452.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T04:57:32.354Z,1513227452.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T04:57:32.768Z,1513227452.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:32.783Z,1513227452.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:33.159Z,1513227453.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:33.188Z,1513227453.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:33.546Z,1513227453.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:33.583Z,1513227453.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:33.936Z,1513227453.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:33.971Z,1513227453.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:34.371Z,1513227454.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:34.386Z,1513227454.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:34.750Z,1513227454.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:34.787Z,1513227454.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:35.148Z,1513227455.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:35.183Z,1513227455.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:35.554Z,1513227455.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:35.591Z,1513227455.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:35.940Z,1513227455.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:35.956Z,1513227455.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:36.348Z,1513227456.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:36.363Z,1513227456.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:36.758Z,1513227456.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:36.792Z,1513227456.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:37.144Z,1513227457.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:37.179Z,1513227457.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:37.564Z,1513227457.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:37.642Z,1513227457.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:37.940Z,1513227457.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:37.964Z,1513227457.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:38.343Z,1513227458.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:38.359Z,1513227458.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:38.766Z,1513227458.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:38.790Z,1513227458.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:39.165Z,1513227459.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:39.195Z,1513227459.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:39.547Z,1513227459.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:39.567Z,1513227459.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:39.942Z,1513227459.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:39.958Z,1513227459.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:40.344Z,1513227460.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:40.358Z,1513227460.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:40.846Z,1513227460.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:40.878Z,1513227460.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:41.131Z,1513227461.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:41.178Z,1513227461.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:41.559Z,1513227461.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:41.579Z,1513227461.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:41.956Z,1513227461.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:41.975Z,1513227461.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:42.347Z,1513227462.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:42.377Z,1513227462.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:42.735Z,1513227462.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:42.762Z,1513227462.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:43.151Z,1513227463.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:43.171Z,1513227463.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:43.531Z,1513227463.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:43.559Z,1513227463.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:43.933Z,1513227463.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:43.967Z,1513227463.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:44.336Z,1513227464.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:44.363Z,1513227464.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:44.752Z,1513227464.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:44.767Z,1513227464.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:45.163Z,1513227465.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:45.183Z,1513227465.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:45.550Z,1513227465.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:45.566Z,1513227465.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:45.946Z,1513227465.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:45.967Z,1513227465.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:46.335Z,1513227466.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:46.363Z,1513227466.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:46.766Z,1513227466.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:46.785Z,1513227466.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:47.139Z,1513227467.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:47.183Z,1513227467.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:47.570Z,1513227467.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:47.585Z,1513227467.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:47.954Z,1513227467.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:47.984Z,1513227467.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:48.350Z,1513227468.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:48.375Z,1513227468.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:48.770Z,1513227468.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:48.784Z,1513227468.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:49.137Z,1513227469.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:49.152Z,1513227469.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:49.539Z,1513227469.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:49.607Z,1513227469.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:49.936Z,1513227469.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:49.963Z,1513227469.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:50.337Z,1513227470.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:50.352Z,1513227470.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:50.752Z,1513227470.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:50.796Z,1513227470.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:51.150Z,1513227471.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:51.165Z,1513227471.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:51.546Z,1513227471.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:51.594Z,1513227471.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:51.944Z,1513227471.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:51.959Z,1513227471.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:52.342Z,1513227472.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:52.358Z,1513227472.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:52.750Z,1513227472.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:52.793Z,1513227472.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:53.139Z,1513227473.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:53.155Z,1513227473.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:53.587Z,1513227473.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:53.638Z,1513227473.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:53.947Z,1513227473.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:53.962Z,1513227473.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:54.354Z,1513227474.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:54.385Z,1513227474.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:54.805Z,1513227474.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:54.847Z,1513227474.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:55.138Z,1513227475.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:55.167Z,1513227475.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:55.544Z,1513227475.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:55.560Z,1513227475.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:55.947Z,1513227475.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:55.967Z,1513227475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:56.333Z,1513227476.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:56.349Z,1513227476.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:56.755Z,1513227476.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:56.792Z,1513227476.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:57.146Z,1513227477.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:57.161Z,1513227477.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:57.547Z,1513227477.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:57.562Z,1513227477.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:57.958Z,1513227477.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:57.972Z,1513227477.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:58.348Z,1513227478.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:58.371Z,1513227478.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:58.751Z,1513227478.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:58.795Z,1513227478.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:59.138Z,1513227479.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:59.155Z,1513227479.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:59.550Z,1513227479.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:57:59.565Z,1513227479.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:57:59.949Z,1513227479.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:00.023Z,1513227480.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:00.350Z,1513227480.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:00.371Z,1513227480.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:00.760Z,1513227480.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:00.795Z,1513227480.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:01.132Z,1513227481.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:01.164Z,1513227481.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:01.535Z,1513227481.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:01.570Z,1513227481.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:01.932Z,1513227481.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:01.967Z,1513227481.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:02.335Z,1513227482.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:02.367Z,1513227482.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:02.766Z,1513227482.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:02.781Z,1513227482.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:03.162Z,1513227483.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:03.186Z,1513227483.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:03.560Z,1513227483.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:03.575Z,1513227483.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:03.931Z,1513227483.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:03.946Z,1513227483.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:04.339Z,1513227484.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:04.355Z,1513227484.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:04.753Z,1513227484.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:04.786Z,1513227484.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:05.135Z,1513227485.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:05.163Z,1513227485.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:05.554Z,1513227485.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:05.589Z,1513227485.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:05.950Z,1513227485.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:05.965Z,1513227485.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:06.353Z,1513227486.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:06.400Z,1513227486.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:06.749Z,1513227486.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:06.794Z,1513227486.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:07.135Z,1513227487.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:07.167Z,1513227487.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:07.546Z,1513227487.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:07.560Z,1513227487.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:07.952Z,1513227487.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:07.967Z,1513227487.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:08.336Z,1513227488.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:08.367Z,1513227488.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:08.819Z,1513227488.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:08.856Z,1513227488.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:09.155Z,1513227489.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:09.171Z,1513227489.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:09.605Z,1513227489.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:09.624Z,1513227489.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:09.944Z,1513227489.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:09.960Z,1513227489.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:10.332Z,1513227490.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:10.362Z,1513227490.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:10.747Z,1513227490.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:10.768Z,1513227490.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:11.143Z,1513227491.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:11.160Z,1513227491.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:11.555Z,1513227491.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:11.571Z,1513227491.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:11.954Z,1513227491.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:12.038Z,1513227492.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:12.355Z,1513227492.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:12.370Z,1513227492.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:12.736Z,1513227492.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:12.802Z,1513227492.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:13.132Z,1513227493.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:13.183Z,1513227493.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:13.535Z,1513227493.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:13.570Z,1513227493.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:13.936Z,1513227493.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:14.003Z,1513227494.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:14.331Z,1513227494.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:14.367Z,1513227494.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:14.782Z,1513227494.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:14.815Z,1513227494.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:15.168Z,1513227495.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:15.187Z,1513227495.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:15.557Z,1513227495.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:15.579Z,1513227495.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:15.942Z,1513227495.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:15.980Z,1513227495.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:16.339Z,1513227496.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:16.354Z,1513227496.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:16.758Z,1513227496.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:16.788Z,1513227496.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:17.141Z,1513227497.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:17.156Z,1513227497.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:17.553Z,1513227497.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:17.579Z,1513227497.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:17.951Z,1513227497.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:17.981Z,1513227497.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:18.353Z,1513227498.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:18.383Z,1513227498.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:18.757Z,1513227498.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:18.787Z,1513227498.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:19.179Z,1513227499.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:19.208Z,1513227499.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:19.550Z,1513227499.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:19.571Z,1513227499.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:19.948Z,1513227499.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:19.962Z,1513227499.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:20.343Z,1513227500.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:20.359Z,1513227500.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:20.752Z,1513227500.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:20.796Z,1513227500.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:21.150Z,1513227501.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:21.171Z,1513227501.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:21.554Z,1513227501.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:21.575Z,1513227501.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:21.949Z,1513227501.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:21.963Z,1513227501.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:22.328Z,1513227502.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:22.440Z,1513227502.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:22.806Z,1513227502.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:22.869Z,1513227502.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:22.873Z,1513227502.873 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T04:53:22.8Z
2017-12-14T04:58:22.873Z,1513227502.873 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T04:58:22.873Z,1513227502.873 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T04:58:23.131Z,1513227503.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:23.167Z,1513227503.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:23.926Z,1513227503.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:23.941Z,1513227503.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:24.058Z,1513227504.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:24.079Z,1513227504.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:27.569Z,1513227507.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:27.598Z,1513227507.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:28.788Z,1513227508.788 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0104.lzma
2017-12-14T04:58:28.820Z,1513227508.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:28.853Z,1513227508.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:28.946Z,1513227508.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:28.983Z,1513227508.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:29.291Z,1513227509.291 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0104.lzma.bak
2017-12-14T04:58:29.291Z,1513227509.291 [DataOverHttps](INFO): SBD MOMSN=5437780
2017-12-14T04:58:29.342Z,1513227509.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:29.373Z,1513227509.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:30.469Z,1513227510.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:30.499Z,1513227510.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:30.607Z,1513227510.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:30.643Z,1513227510.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:34.169Z,1513227514.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:34.215Z,1513227514.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:34.313Z,1513227514.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:34.375Z,1513227514.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:34.754Z,1513227514.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:34.783Z,1513227514.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:35.137Z,1513227515.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:35.168Z,1513227515.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:35.514Z,1513227515.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:35.563Z,1513227515.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:35.912Z,1513227515.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:35.931Z,1513227515.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:39.438Z,1513227519.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:39.502Z,1513227519.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:39.581Z,1513227519.581 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0105.lzma
2017-12-14T04:58:39.608Z,1513227519.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:39.653Z,1513227519.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:39.968Z,1513227519.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:39.983Z,1513227519.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:40.331Z,1513227520.331 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0105.lzma.bak
2017-12-14T04:58:40.331Z,1513227520.331 [DataOverHttps](INFO): SBD MOMSN=5437785
2017-12-14T04:58:40.374Z,1513227520.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:40.389Z,1513227520.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:41.716Z,1513227521.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:41.736Z,1513227521.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:41.763Z,1513227521.763 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T04:58:41.763Z,1513227521.763 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T04:58:41.763Z,1513227521.763 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T04:58:41.857Z,1513227521.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:41.892Z,1513227521.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:45.431Z,1513227525.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:45.446Z,1513227525.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:45.541Z,1513227525.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:45.586Z,1513227525.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:45.927Z,1513227525.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:45.942Z,1513227525.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:46.328Z,1513227526.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:46.342Z,1513227526.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:46.758Z,1513227526.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:46.792Z,1513227526.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:47.111Z,1513227527.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:47.135Z,1513227527.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:47.506Z,1513227527.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:47.550Z,1513227527.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:47.900Z,1513227527.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:47.917Z,1513227527.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:48.306Z,1513227528.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:48.321Z,1513227528.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:48.753Z,1513227528.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:48.780Z,1513227528.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:49.114Z,1513227529.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:49.143Z,1513227529.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:49.518Z,1513227529.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:49.534Z,1513227529.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:49.914Z,1513227529.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:49.928Z,1513227529.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:50.292Z,1513227530.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:50.320Z,1513227530.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:50.767Z,1513227530.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:50.791Z,1513227530.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:51.106Z,1513227531.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:51.121Z,1513227531.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:51.513Z,1513227531.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:51.535Z,1513227531.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:51.913Z,1513227531.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:51.928Z,1513227531.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:52.313Z,1513227532.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:52.327Z,1513227532.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:52.707Z,1513227532.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:52.727Z,1513227532.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:53.105Z,1513227533.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:53.126Z,1513227533.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:53.504Z,1513227533.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:53.519Z,1513227533.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:53.912Z,1513227533.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:53.927Z,1513227533.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:54.307Z,1513227534.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:54.326Z,1513227534.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:54.714Z,1513227534.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:54.735Z,1513227534.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:55.112Z,1513227535.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:55.132Z,1513227535.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:55.508Z,1513227535.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:55.531Z,1513227535.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:55.905Z,1513227535.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:55.938Z,1513227535.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:56.308Z,1513227536.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:56.331Z,1513227536.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:56.755Z,1513227536.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:56.792Z,1513227536.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:57.103Z,1513227537.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:57.127Z,1513227537.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:57.514Z,1513227537.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:57.534Z,1513227537.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:57.918Z,1513227537.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:57.934Z,1513227537.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:58.319Z,1513227538.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:58.335Z,1513227538.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:58.744Z,1513227538.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:58.831Z,1513227538.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:59.104Z,1513227539.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:59.139Z,1513227539.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:59.507Z,1513227539.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:59.596Z,1513227539.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:58:59.900Z,1513227539.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:58:59.919Z,1513227539.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:00.304Z,1513227540.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:00.355Z,1513227540.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:00.802Z,1513227540.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:00.849Z,1513227540.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:01.117Z,1513227541.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:01.166Z,1513227541.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:01.555Z,1513227541.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:01.570Z,1513227541.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:01.904Z,1513227541.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:01.920Z,1513227541.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:02.292Z,1513227542.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:02.323Z,1513227542.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:02.734Z,1513227542.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:02.770Z,1513227542.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:03.095Z,1513227543.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:03.120Z,1513227543.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:03.506Z,1513227543.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:03.534Z,1513227543.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:03.910Z,1513227543.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:03.948Z,1513227543.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:04.311Z,1513227544.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:04.338Z,1513227544.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:04.709Z,1513227544.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:04.792Z,1513227544.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:05.104Z,1513227545.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:05.123Z,1513227545.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:05.505Z,1513227545.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:05.519Z,1513227545.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:05.896Z,1513227545.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:05.923Z,1513227545.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:06.309Z,1513227546.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:06.324Z,1513227546.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:06.337Z,1513227546.337 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T04:59:06.718Z,1513227546.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:06.732Z,1513227546.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:07.129Z,1513227547.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:07.167Z,1513227547.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:07.520Z,1513227547.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:07.535Z,1513227547.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:07.886Z,1513227547.886 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T04:59:07.886Z,1513227547.886 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T04:59:07.886Z,1513227547.886 [DropWeight](ERROR): Hardware Fault
2017-12-14T04:59:07.926Z,1513227547.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:07.941Z,1513227547.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:07.969Z,1513227547.969 [CBIT](INFO): Critical error at 20171214T045907
2017-12-14T04:59:07.971Z,1513227547.971 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T04:59:07.971Z,1513227547.971 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T04:59:08.296Z,1513227548.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:08.322Z,1513227548.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:08.334Z,1513227548.334 [CBIT](INFO): Critical error at 20171214T045907
2017-12-14T04:59:08.696Z,1513227548.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:08.723Z,1513227548.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:09.101Z,1513227549.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:09.131Z,1513227549.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:09.517Z,1513227549.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:09.573Z,1513227549.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:09.918Z,1513227549.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:09.932Z,1513227549.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:10.322Z,1513227550.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:10.374Z,1513227550.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:10.734Z,1513227550.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:10.779Z,1513227550.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:11.099Z,1513227551.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:11.122Z,1513227551.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:11.498Z,1513227551.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:11.514Z,1513227551.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:11.896Z,1513227551.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:11.919Z,1513227551.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:12.304Z,1513227552.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:12.319Z,1513227552.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:12.738Z,1513227552.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:12.767Z,1513227552.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:13.111Z,1513227553.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:13.129Z,1513227553.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:13.521Z,1513227553.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:13.563Z,1513227553.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:13.894Z,1513227553.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:13.927Z,1513227553.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:14.288Z,1513227554.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:14.322Z,1513227554.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:14.727Z,1513227554.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:14.766Z,1513227554.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:15.099Z,1513227555.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:15.131Z,1513227555.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:15.526Z,1513227555.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:15.541Z,1513227555.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:15.919Z,1513227555.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:15.939Z,1513227555.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:16.317Z,1513227556.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:16.374Z,1513227556.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:16.733Z,1513227556.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:16.801Z,1513227556.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:17.119Z,1513227557.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:17.138Z,1513227557.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:17.495Z,1513227557.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:17.535Z,1513227557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:17.900Z,1513227557.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:17.931Z,1513227557.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:18.304Z,1513227558.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:18.335Z,1513227558.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:18.760Z,1513227558.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:18.811Z,1513227558.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:19.109Z,1513227559.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:19.138Z,1513227559.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:19.506Z,1513227559.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:19.539Z,1513227559.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:19.899Z,1513227559.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:19.931Z,1513227559.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:20.302Z,1513227560.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:20.317Z,1513227560.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:20.705Z,1513227560.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:20.719Z,1513227560.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:21.112Z,1513227561.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:21.150Z,1513227561.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:21.517Z,1513227561.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:21.610Z,1513227561.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:21.913Z,1513227561.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:21.928Z,1513227561.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:22.306Z,1513227562.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:22.339Z,1513227562.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:22.708Z,1513227562.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:22.762Z,1513227562.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:23.110Z,1513227563.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:23.176Z,1513227563.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:23.495Z,1513227563.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:23.551Z,1513227563.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:23.900Z,1513227563.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:23.935Z,1513227563.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:24.295Z,1513227564.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:24.326Z,1513227564.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:24.747Z,1513227564.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:24.774Z,1513227564.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:25.116Z,1513227565.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:25.139Z,1513227565.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:25.510Z,1513227565.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:25.527Z,1513227565.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:25.895Z,1513227565.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:25.935Z,1513227565.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:26.298Z,1513227566.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:26.341Z,1513227566.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:26.756Z,1513227566.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:26.775Z,1513227566.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:27.108Z,1513227567.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:27.145Z,1513227567.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:27.513Z,1513227567.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:27.535Z,1513227567.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:27.916Z,1513227567.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:27.931Z,1513227567.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:28.317Z,1513227568.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:28.332Z,1513227568.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:28.736Z,1513227568.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:28.768Z,1513227568.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:29.098Z,1513227569.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:29.124Z,1513227569.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:29.563Z,1513227569.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:29.624Z,1513227569.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:29.893Z,1513227569.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:29.925Z,1513227569.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:30.298Z,1513227570.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:30.333Z,1513227570.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:30.754Z,1513227570.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:30.776Z,1513227570.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:31.120Z,1513227571.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:31.134Z,1513227571.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:31.522Z,1513227571.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:31.537Z,1513227571.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:31.895Z,1513227571.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:31.940Z,1513227571.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:32.300Z,1513227572.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:32.331Z,1513227572.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:32.760Z,1513227572.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:32.837Z,1513227572.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:33.103Z,1513227573.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:33.118Z,1513227573.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:33.513Z,1513227573.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:33.528Z,1513227573.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:33.914Z,1513227573.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:33.958Z,1513227573.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:34.309Z,1513227574.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:34.323Z,1513227574.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:34.700Z,1513227574.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:34.719Z,1513227574.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:35.098Z,1513227575.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:35.135Z,1513227575.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:35.502Z,1513227575.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:35.535Z,1513227575.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:35.893Z,1513227575.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:35.908Z,1513227575.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:36.303Z,1513227576.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:36.331Z,1513227576.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:36.709Z,1513227576.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:36.739Z,1513227576.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:37.114Z,1513227577.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:37.151Z,1513227577.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:37.515Z,1513227577.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:37.539Z,1513227577.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:37.901Z,1513227577.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:37.915Z,1513227577.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:38.299Z,1513227578.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:38.319Z,1513227578.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:38.734Z,1513227578.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:38.774Z,1513227578.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:39.135Z,1513227579.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:39.163Z,1513227579.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:39.508Z,1513227579.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:39.531Z,1513227579.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:39.912Z,1513227579.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:39.935Z,1513227579.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:40.326Z,1513227580.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:40.357Z,1513227580.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:40.740Z,1513227580.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:40.776Z,1513227580.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:41.099Z,1513227581.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:41.125Z,1513227581.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:41.499Z,1513227581.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:41.531Z,1513227581.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:41.896Z,1513227581.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:41.927Z,1513227581.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:42.338Z,1513227582.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:42.375Z,1513227582.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:45.790Z,1513227585.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:45.878Z,1513227585.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:45.982Z,1513227585.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:46.015Z,1513227586.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:46.358Z,1513227586.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:46.388Z,1513227586.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:46.804Z,1513227586.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:46.849Z,1513227586.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:47.140Z,1513227587.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:47.156Z,1513227587.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:47.544Z,1513227587.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:47.598Z,1513227587.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:47.945Z,1513227587.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:47.960Z,1513227587.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:48.341Z,1513227588.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:48.356Z,1513227588.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:48.764Z,1513227588.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:48.796Z,1513227588.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:49.162Z,1513227589.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:49.191Z,1513227589.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:49.551Z,1513227589.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:49.566Z,1513227589.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:50.002Z,1513227590.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:50.017Z,1513227590.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:50.348Z,1513227590.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:50.362Z,1513227590.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:50.750Z,1513227590.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:50.765Z,1513227590.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:51.155Z,1513227591.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:51.170Z,1513227591.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:51.555Z,1513227591.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:51.569Z,1513227591.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:51.973Z,1513227591.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:52.004Z,1513227592.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:52.365Z,1513227592.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:52.381Z,1513227592.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:52.740Z,1513227592.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:52.776Z,1513227592.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:53.138Z,1513227593.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:53.171Z,1513227593.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:53.541Z,1513227593.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:53.575Z,1513227593.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:53.959Z,1513227593.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:53.974Z,1513227593.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:54.337Z,1513227594.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:54.369Z,1513227594.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:54.758Z,1513227594.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:54.789Z,1513227594.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:55.189Z,1513227595.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:55.238Z,1513227595.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:55.550Z,1513227595.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:55.581Z,1513227595.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:55.942Z,1513227595.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:55.988Z,1513227595.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:56.346Z,1513227596.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:56.360Z,1513227596.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:56.774Z,1513227596.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:56.790Z,1513227596.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:57.152Z,1513227597.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:57.179Z,1513227597.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:57.558Z,1513227597.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:57.593Z,1513227597.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:57.963Z,1513227597.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:57.987Z,1513227597.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:58.391Z,1513227598.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:58.414Z,1513227598.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:58.749Z,1513227598.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:58.763Z,1513227598.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:59.146Z,1513227599.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:59.161Z,1513227599.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:59.551Z,1513227599.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:59.566Z,1513227599.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T04:59:59.950Z,1513227599.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T04:59:59.965Z,1513227599.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:00.344Z,1513227600.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:00.368Z,1513227600.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:00.798Z,1513227600.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:00.821Z,1513227600.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:01.162Z,1513227601.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:01.178Z,1513227601.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:01.572Z,1513227601.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:01.613Z,1513227601.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:01.957Z,1513227601.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:01.972Z,1513227601.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:02.340Z,1513227602.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:02.375Z,1513227602.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:02.746Z,1513227602.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:02.777Z,1513227602.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:03.140Z,1513227603.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:03.169Z,1513227603.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:03.561Z,1513227603.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:03.580Z,1513227603.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:03.966Z,1513227603.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:03.987Z,1513227603.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:04.359Z,1513227604.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:04.382Z,1513227604.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:04.754Z,1513227604.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:04.795Z,1513227604.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:05.139Z,1513227605.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:05.169Z,1513227605.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:05.539Z,1513227605.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:05.575Z,1513227605.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:05.939Z,1513227605.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:05.968Z,1513227605.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:06.343Z,1513227606.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:06.370Z,1513227606.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:06.759Z,1513227606.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:06.780Z,1513227606.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:07.168Z,1513227607.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:07.191Z,1513227607.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:07.603Z,1513227607.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:07.768Z,1513227607.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:07.942Z,1513227607.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:07.987Z,1513227607.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:08.337Z,1513227608.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:08.376Z,1513227608.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:08.741Z,1513227608.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:08.796Z,1513227608.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:09.142Z,1513227609.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:09.174Z,1513227609.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:09.549Z,1513227609.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:09.596Z,1513227609.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:09.964Z,1513227609.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:09.979Z,1513227609.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:10.350Z,1513227610.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:10.383Z,1513227610.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:10.740Z,1513227610.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:10.785Z,1513227610.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:11.169Z,1513227611.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:11.200Z,1513227611.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:11.546Z,1513227611.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:11.561Z,1513227611.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:11.948Z,1513227611.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:11.962Z,1513227611.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:12.341Z,1513227612.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:12.356Z,1513227612.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:12.756Z,1513227612.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:12.805Z,1513227612.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:13.162Z,1513227613.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:13.188Z,1513227613.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:13.558Z,1513227613.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:13.591Z,1513227613.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:13.949Z,1513227613.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:13.963Z,1513227613.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:14.382Z,1513227614.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:14.411Z,1513227614.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:14.797Z,1513227614.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:14.823Z,1513227614.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:15.149Z,1513227615.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:15.169Z,1513227615.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:15.558Z,1513227615.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:15.574Z,1513227615.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:15.958Z,1513227615.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:15.979Z,1513227615.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:16.359Z,1513227616.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:16.374Z,1513227616.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:16.754Z,1513227616.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:16.768Z,1513227616.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:17.141Z,1513227617.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:17.171Z,1513227617.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:17.580Z,1513227617.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:17.626Z,1513227617.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:17.938Z,1513227617.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:18.008Z,1513227618.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:18.363Z,1513227618.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:18.378Z,1513227618.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:18.763Z,1513227618.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:18.777Z,1513227618.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:19.161Z,1513227619.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:19.176Z,1513227619.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:19.550Z,1513227619.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:19.575Z,1513227619.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:19.951Z,1513227619.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:19.966Z,1513227619.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:20.352Z,1513227620.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:20.366Z,1513227620.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:20.780Z,1513227620.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:20.816Z,1513227620.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:21.166Z,1513227621.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:21.187Z,1513227621.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:21.564Z,1513227621.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:21.579Z,1513227621.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:21.936Z,1513227621.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:21.969Z,1513227621.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:22.342Z,1513227622.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:22.368Z,1513227622.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:22.741Z,1513227622.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:22.784Z,1513227622.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:23.147Z,1513227623.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:23.182Z,1513227623.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:23.558Z,1513227623.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:23.593Z,1513227623.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:24.003Z,1513227624.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:24.035Z,1513227624.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:24.350Z,1513227624.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:24.382Z,1513227624.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:24.740Z,1513227624.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:24.767Z,1513227624.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:25.146Z,1513227625.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:25.183Z,1513227625.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:25.547Z,1513227625.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:25.562Z,1513227625.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:25.949Z,1513227625.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:25.964Z,1513227625.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:26.348Z,1513227626.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:26.365Z,1513227626.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:26.756Z,1513227626.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:26.791Z,1513227626.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:27.162Z,1513227627.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:27.190Z,1513227627.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:27.571Z,1513227627.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:27.604Z,1513227627.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:27.948Z,1513227627.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:27.963Z,1513227627.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:28.347Z,1513227628.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:28.362Z,1513227628.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:28.802Z,1513227628.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:28.848Z,1513227628.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:29.147Z,1513227629.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:29.162Z,1513227629.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:29.550Z,1513227629.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:29.566Z,1513227629.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:29.954Z,1513227629.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:30.044Z,1513227630.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:30.355Z,1513227630.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:30.382Z,1513227630.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:30.768Z,1513227630.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:30.847Z,1513227630.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:31.160Z,1513227631.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:31.176Z,1513227631.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:31.568Z,1513227631.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:31.615Z,1513227631.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:31.946Z,1513227631.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:31.973Z,1513227631.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:32.363Z,1513227632.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:32.383Z,1513227632.383 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:32.383Z,1513227632.383 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2017-12-14T05:00:32.383Z,1513227632.383 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:00:32.385Z,1513227632.385 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:32.385Z,1513227632.385 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2017-12-14T05:00:32.385Z,1513227632.385 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:00:32.387Z,1513227632.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:32.387Z,1513227632.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2017-12-14T05:00:32.387Z,1513227632.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:00:32.423Z,1513227632.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:00:32.424Z,1513227632.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:00:32.424Z,1513227632.424 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:00:32.771Z,1513227632.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:32.825Z,1513227632.825 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:00:32.825Z,1513227632.825 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2017-12-14T05:00:32.826Z,1513227632.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:00:32.826Z,1513227632.826 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2017-12-14T05:00:32.826Z,1513227632.826 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:00:32.826Z,1513227632.826 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2017-12-14T05:00:33.165Z,1513227633.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:33.178Z,1513227633.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:00:33.179Z,1513227633.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:00:33.179Z,1513227633.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:00:33.180Z,1513227633.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:00:33.180Z,1513227633.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:00:33.180Z,1513227633.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:00:33.181Z,1513227633.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:00:33.181Z,1513227633.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:00:33.181Z,1513227633.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:00:33.539Z,1513227633.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:33.579Z,1513227633.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:34.019Z,1513227634.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:34.084Z,1513227634.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:34.351Z,1513227634.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:34.381Z,1513227634.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:34.773Z,1513227634.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:34.788Z,1513227634.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:35.155Z,1513227635.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:35.181Z,1513227635.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:35.573Z,1513227635.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:35.595Z,1513227635.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:35.943Z,1513227635.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:35.959Z,1513227635.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:36.347Z,1513227636.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:36.383Z,1513227636.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:36.761Z,1513227636.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:36.788Z,1513227636.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:37.144Z,1513227637.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:37.167Z,1513227637.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:37.553Z,1513227637.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:37.569Z,1513227637.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:37.953Z,1513227637.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:37.968Z,1513227637.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:38.352Z,1513227638.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:38.384Z,1513227638.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:38.752Z,1513227638.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:38.775Z,1513227638.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:39.150Z,1513227639.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:39.172Z,1513227639.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:39.556Z,1513227639.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:39.570Z,1513227639.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:39.956Z,1513227639.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:40.003Z,1513227640.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:40.375Z,1513227640.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:40.434Z,1513227640.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:40.763Z,1513227640.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:40.780Z,1513227640.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:41.160Z,1513227641.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:41.176Z,1513227641.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:41.557Z,1513227641.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:41.578Z,1513227641.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:41.951Z,1513227641.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:41.966Z,1513227641.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:42.343Z,1513227642.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:42.371Z,1513227642.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:45.818Z,1513227645.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:45.840Z,1513227645.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:45.952Z,1513227645.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:45.998Z,1513227645.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:46.303Z,1513227646.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:46.326Z,1513227646.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:46.748Z,1513227646.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:46.819Z,1513227646.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:47.118Z,1513227647.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:47.134Z,1513227647.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:47.507Z,1513227647.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:47.522Z,1513227647.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:47.896Z,1513227647.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:47.922Z,1513227647.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:48.288Z,1513227648.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:48.320Z,1513227648.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:48.747Z,1513227648.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:48.783Z,1513227648.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:49.123Z,1513227649.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:49.143Z,1513227649.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:49.506Z,1513227649.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:49.537Z,1513227649.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:49.896Z,1513227649.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:49.911Z,1513227649.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:50.310Z,1513227650.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:50.331Z,1513227650.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:50.744Z,1513227650.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:50.772Z,1513227650.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:51.088Z,1513227651.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:51.120Z,1513227651.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:51.577Z,1513227651.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:51.631Z,1513227651.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:51.910Z,1513227651.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:52.031Z,1513227652.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:52.309Z,1513227652.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:52.336Z,1513227652.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:52.747Z,1513227652.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:52.814Z,1513227652.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:53.117Z,1513227653.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:53.148Z,1513227653.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:53.498Z,1513227653.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:53.547Z,1513227653.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:53.895Z,1513227653.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:53.931Z,1513227653.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:54.295Z,1513227654.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:54.326Z,1513227654.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:54.742Z,1513227654.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:54.780Z,1513227654.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:55.102Z,1513227655.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:55.139Z,1513227655.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:55.507Z,1513227655.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:55.535Z,1513227655.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:55.898Z,1513227655.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:55.913Z,1513227655.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:56.306Z,1513227656.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:56.363Z,1513227656.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:56.704Z,1513227656.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:56.786Z,1513227656.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:57.102Z,1513227657.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:57.125Z,1513227657.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:57.502Z,1513227657.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:57.517Z,1513227657.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:57.910Z,1513227657.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:57.945Z,1513227657.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:58.301Z,1513227658.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:58.316Z,1513227658.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:58.696Z,1513227658.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:58.711Z,1513227658.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:59.091Z,1513227659.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:59.114Z,1513227659.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:59.524Z,1513227659.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:59.559Z,1513227659.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:00:59.897Z,1513227659.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:00:59.912Z,1513227659.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:00.296Z,1513227660.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:00.311Z,1513227660.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:00.705Z,1513227660.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:00.719Z,1513227660.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:01.111Z,1513227661.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:01.125Z,1513227661.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:01.502Z,1513227661.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:01.532Z,1513227661.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:01.886Z,1513227661.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:01.943Z,1513227661.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:02.283Z,1513227662.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:02.319Z,1513227662.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:02.776Z,1513227662.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:02.831Z,1513227662.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:03.097Z,1513227663.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:03.112Z,1513227663.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:03.501Z,1513227663.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:03.539Z,1513227663.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:03.913Z,1513227663.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:03.940Z,1513227663.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:04.298Z,1513227664.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:04.312Z,1513227664.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:04.734Z,1513227664.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:04.773Z,1513227664.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:05.087Z,1513227665.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:05.122Z,1513227665.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:05.494Z,1513227665.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:05.520Z,1513227665.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:05.888Z,1513227665.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:05.923Z,1513227665.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:06.304Z,1513227666.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:06.328Z,1513227666.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:06.749Z,1513227666.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:06.791Z,1513227666.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:07.109Z,1513227667.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:07.137Z,1513227667.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:07.506Z,1513227667.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:07.534Z,1513227667.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:07.898Z,1513227667.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:07.915Z,1513227667.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:08.292Z,1513227668.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:08.307Z,1513227668.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:08.758Z,1513227668.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:08.805Z,1513227668.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:09.129Z,1513227669.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:09.161Z,1513227669.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:09.514Z,1513227669.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:09.547Z,1513227669.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:09.910Z,1513227669.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:09.940Z,1513227669.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:10.310Z,1513227670.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:10.339Z,1513227670.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:10.724Z,1513227670.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:10.797Z,1513227670.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:11.088Z,1513227671.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:11.115Z,1513227671.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:11.495Z,1513227671.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:11.522Z,1513227671.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:11.900Z,1513227671.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:11.926Z,1513227671.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:12.291Z,1513227672.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:12.335Z,1513227672.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:12.715Z,1513227672.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:12.735Z,1513227672.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:13.115Z,1513227673.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:13.131Z,1513227673.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:13.514Z,1513227673.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:13.534Z,1513227673.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:13.887Z,1513227673.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:13.928Z,1513227673.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:14.293Z,1513227674.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:14.351Z,1513227674.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:14.698Z,1513227674.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:14.714Z,1513227674.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:15.096Z,1513227675.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:15.158Z,1513227675.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:15.520Z,1513227675.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:15.555Z,1513227675.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:15.911Z,1513227675.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:15.979Z,1513227675.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:16.328Z,1513227676.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:16.351Z,1513227676.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:16.782Z,1513227676.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:16.804Z,1513227676.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:17.111Z,1513227677.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:17.149Z,1513227677.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:17.494Z,1513227677.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:17.517Z,1513227677.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:17.908Z,1513227677.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:17.950Z,1513227677.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:18.297Z,1513227678.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:18.351Z,1513227678.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:18.777Z,1513227678.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:18.829Z,1513227678.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:19.118Z,1513227679.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:19.166Z,1513227679.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:19.509Z,1513227679.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:19.536Z,1513227679.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:19.888Z,1513227679.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:19.939Z,1513227679.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:20.289Z,1513227680.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:20.337Z,1513227680.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:20.716Z,1513227680.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:20.777Z,1513227680.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:21.207Z,1513227681.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:21.247Z,1513227681.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:21.594Z,1513227681.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:21.661Z,1513227681.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:21.908Z,1513227681.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:21.955Z,1513227681.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:22.316Z,1513227682.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:22.355Z,1513227682.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:22.740Z,1513227682.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:22.788Z,1513227682.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:23.126Z,1513227683.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:23.178Z,1513227683.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:23.504Z,1513227683.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:23.528Z,1513227683.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:23.895Z,1513227683.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:23.925Z,1513227683.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:24.289Z,1513227684.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:24.351Z,1513227684.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:24.712Z,1513227684.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:24.812Z,1513227684.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:25.110Z,1513227685.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:25.149Z,1513227685.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:25.498Z,1513227685.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:25.615Z,1513227685.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:25.888Z,1513227685.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:25.943Z,1513227685.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:26.306Z,1513227686.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:26.346Z,1513227686.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:26.722Z,1513227686.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:26.749Z,1513227686.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:27.129Z,1513227687.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:27.172Z,1513227687.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:27.500Z,1513227687.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:27.565Z,1513227687.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:27.911Z,1513227687.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:27.934Z,1513227687.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:28.317Z,1513227688.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:28.336Z,1513227688.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:28.695Z,1513227688.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:28.733Z,1513227688.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:29.104Z,1513227689.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:29.159Z,1513227689.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:29.489Z,1513227689.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:29.570Z,1513227689.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:29.894Z,1513227689.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:29.920Z,1513227689.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:30.292Z,1513227690.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:30.331Z,1513227690.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:30.752Z,1513227690.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:30.796Z,1513227690.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:31.098Z,1513227691.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:31.128Z,1513227691.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:31.509Z,1513227691.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:31.528Z,1513227691.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:31.896Z,1513227691.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:31.931Z,1513227691.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:32.322Z,1513227692.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:32.370Z,1513227692.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:32.762Z,1513227692.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:32.808Z,1513227692.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:33.114Z,1513227693.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:33.151Z,1513227693.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:33.533Z,1513227693.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:33.564Z,1513227693.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:33.920Z,1513227693.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:33.944Z,1513227693.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:34.308Z,1513227694.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:34.351Z,1513227694.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:34.740Z,1513227694.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:34.785Z,1513227694.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:35.105Z,1513227695.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:35.137Z,1513227695.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:35.531Z,1513227695.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:35.554Z,1513227695.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:35.898Z,1513227695.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:35.958Z,1513227695.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:36.292Z,1513227696.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:36.387Z,1513227696.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:36.728Z,1513227696.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:36.792Z,1513227696.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:37.132Z,1513227697.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:37.190Z,1513227697.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:37.514Z,1513227697.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:37.537Z,1513227697.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:37.892Z,1513227697.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:37.943Z,1513227697.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:38.296Z,1513227698.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:38.311Z,1513227698.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:38.704Z,1513227698.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:38.776Z,1513227698.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:39.120Z,1513227699.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:39.139Z,1513227699.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:39.502Z,1513227699.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:39.528Z,1513227699.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:39.914Z,1513227699.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:39.934Z,1513227699.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:40.302Z,1513227700.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:40.335Z,1513227700.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:40.687Z,1513227700.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:40.701Z,1513227700.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:41.091Z,1513227701.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:41.131Z,1513227701.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:41.499Z,1513227701.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:41.532Z,1513227701.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:41.894Z,1513227701.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:41.934Z,1513227701.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:42.288Z,1513227702.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:42.303Z,1513227702.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:42.698Z,1513227702.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:42.713Z,1513227702.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:45.958Z,1513227705.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:45.996Z,1513227705.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:46.102Z,1513227706.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:46.116Z,1513227706.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:46.441Z,1513227706.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:46.467Z,1513227706.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:46.861Z,1513227706.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:46.876Z,1513227706.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:47.250Z,1513227707.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:47.265Z,1513227707.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:47.662Z,1513227707.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:47.683Z,1513227707.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:48.056Z,1513227708.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:48.070Z,1513227708.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:48.455Z,1513227708.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:48.475Z,1513227708.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:48.859Z,1513227708.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:48.899Z,1513227708.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:49.245Z,1513227709.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:49.279Z,1513227709.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:49.649Z,1513227709.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:49.667Z,1513227709.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:50.056Z,1513227710.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:50.071Z,1513227710.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:50.461Z,1513227710.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:50.476Z,1513227710.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:50.856Z,1513227710.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:50.877Z,1513227710.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:51.261Z,1513227711.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:51.276Z,1513227711.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:51.651Z,1513227711.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:51.666Z,1513227711.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:52.050Z,1513227712.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:52.065Z,1513227712.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:52.446Z,1513227712.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:52.479Z,1513227712.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:52.860Z,1513227712.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:52.867Z,1513227712.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T05:01:52.887Z,1513227712.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:53.260Z,1513227713.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:53.338Z,1513227713.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:53.662Z,1513227713.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:53.680Z,1513227713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:54.044Z,1513227714.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:54.069Z,1513227714.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:54.453Z,1513227714.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:54.468Z,1513227714.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:54.849Z,1513227714.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:54.864Z,1513227714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:55.249Z,1513227715.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:55.263Z,1513227715.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:55.663Z,1513227715.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:55.679Z,1513227715.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:56.055Z,1513227716.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:56.071Z,1513227716.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:56.458Z,1513227716.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:56.479Z,1513227716.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:56.850Z,1513227716.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:56.865Z,1513227716.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:57.243Z,1513227717.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:57.275Z,1513227717.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:57.662Z,1513227717.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:57.677Z,1513227717.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:58.059Z,1513227718.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:58.079Z,1513227718.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:58.463Z,1513227718.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:58.523Z,1513227718.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:58.860Z,1513227718.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:58.876Z,1513227718.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:59.249Z,1513227719.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:59.300Z,1513227719.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:01:59.662Z,1513227719.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:01:59.676Z,1513227719.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:00.061Z,1513227720.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:00.099Z,1513227720.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:00.466Z,1513227720.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:00.487Z,1513227720.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:00.848Z,1513227720.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:00.867Z,1513227720.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:01.247Z,1513227721.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:01.267Z,1513227721.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:01.658Z,1513227721.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:01.673Z,1513227721.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:02.063Z,1513227722.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:02.078Z,1513227722.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:02.457Z,1513227722.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:02.471Z,1513227722.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:02.848Z,1513227722.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:02.863Z,1513227722.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:03.238Z,1513227723.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:03.253Z,1513227723.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:03.661Z,1513227723.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:03.678Z,1513227723.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:04.056Z,1513227724.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:04.109Z,1513227724.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:04.459Z,1513227724.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:04.479Z,1513227724.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:04.850Z,1513227724.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:04.871Z,1513227724.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:05.246Z,1513227725.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:05.283Z,1513227725.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:05.663Z,1513227725.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:05.669Z,1513227725.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x4089 got:0x55430
2017-12-14T05:02:05.695Z,1513227725.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:06.057Z,1513227726.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:06.073Z,1513227726.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:06.451Z,1513227726.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:06.466Z,1513227726.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:06.846Z,1513227726.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:06.887Z,1513227726.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:07.246Z,1513227727.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:07.304Z,1513227727.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:07.660Z,1513227727.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:07.675Z,1513227727.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:08.063Z,1513227728.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:08.090Z,1513227728.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:08.457Z,1513227728.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:08.508Z,1513227728.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:08.840Z,1513227728.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:08.876Z,1513227728.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:09.249Z,1513227729.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:09.268Z,1513227729.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:09.802Z,1513227729.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:09.826Z,1513227729.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:10.086Z,1513227730.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:10.129Z,1513227730.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:10.460Z,1513227730.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:10.484Z,1513227730.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:10.846Z,1513227730.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:10.871Z,1513227730.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:11.248Z,1513227731.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:11.279Z,1513227731.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:11.650Z,1513227731.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:11.685Z,1513227731.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:12.069Z,1513227732.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:12.084Z,1513227732.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:12.468Z,1513227732.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:12.483Z,1513227732.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:12.847Z,1513227732.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:12.880Z,1513227732.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:13.269Z,1513227733.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:13.334Z,1513227733.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:13.644Z,1513227733.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:13.685Z,1513227733.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:14.056Z,1513227734.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:14.083Z,1513227734.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:14.454Z,1513227734.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:14.486Z,1513227734.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:14.858Z,1513227734.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:14.887Z,1513227734.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:15.271Z,1513227735.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:15.285Z,1513227735.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:15.670Z,1513227735.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:15.691Z,1513227735.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:16.052Z,1513227736.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:16.075Z,1513227736.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:16.486Z,1513227736.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:16.522Z,1513227736.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:16.854Z,1513227736.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:16.875Z,1513227736.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:17.260Z,1513227737.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:17.299Z,1513227737.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:17.662Z,1513227737.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:17.677Z,1513227737.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:18.061Z,1513227738.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:18.083Z,1513227738.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:18.461Z,1513227738.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:18.476Z,1513227738.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:18.857Z,1513227738.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:18.879Z,1513227738.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:19.258Z,1513227739.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:19.273Z,1513227739.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:19.706Z,1513227739.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:19.784Z,1513227739.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:20.058Z,1513227740.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:20.124Z,1513227740.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:20.460Z,1513227740.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:20.476Z,1513227740.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:20.858Z,1513227740.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:20.922Z,1513227740.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:21.263Z,1513227741.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:21.283Z,1513227741.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:21.668Z,1513227741.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:21.682Z,1513227741.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:22.060Z,1513227742.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:22.112Z,1513227742.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:22.454Z,1513227742.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:22.470Z,1513227742.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:22.859Z,1513227742.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:22.925Z,1513227742.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:23.256Z,1513227743.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:23.279Z,1513227743.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:23.666Z,1513227743.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:23.680Z,1513227743.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:24.065Z,1513227744.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:24.079Z,1513227744.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:24.466Z,1513227744.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:24.505Z,1513227744.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:24.865Z,1513227744.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:24.920Z,1513227744.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:25.254Z,1513227745.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:25.275Z,1513227745.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:25.655Z,1513227745.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:25.671Z,1513227745.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:26.063Z,1513227746.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:26.078Z,1513227746.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:26.457Z,1513227746.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:26.484Z,1513227746.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:26.861Z,1513227746.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:26.880Z,1513227746.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:27.278Z,1513227747.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:27.292Z,1513227747.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:27.673Z,1513227747.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:27.695Z,1513227747.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:28.037Z,1513227748.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:28.075Z,1513227748.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:28.446Z,1513227748.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:28.475Z,1513227748.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:28.849Z,1513227748.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:28.875Z,1513227748.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:29.273Z,1513227749.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:29.307Z,1513227749.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:29.658Z,1513227749.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:29.683Z,1513227749.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:30.056Z,1513227750.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:30.131Z,1513227750.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:30.450Z,1513227750.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:30.476Z,1513227750.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:30.843Z,1513227750.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:30.883Z,1513227750.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:31.251Z,1513227751.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:31.307Z,1513227751.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:31.651Z,1513227751.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:31.682Z,1513227751.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:32.051Z,1513227752.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:32.065Z,1513227752.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:32.466Z,1513227752.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:32.502Z,1513227752.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:32.867Z,1513227752.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:32.894Z,1513227752.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:33.274Z,1513227753.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:33.303Z,1513227753.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:33.662Z,1513227753.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:33.687Z,1513227753.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:34.048Z,1513227754.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:34.093Z,1513227754.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:34.458Z,1513227754.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:34.465Z,1513227754.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x14696 got:0x192
2017-12-14T05:02:34.500Z,1513227754.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:34.872Z,1513227754.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:34.901Z,1513227754.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:35.260Z,1513227755.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:35.275Z,1513227755.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:35.699Z,1513227755.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:35.756Z,1513227755.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:36.062Z,1513227756.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:36.076Z,1513227756.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:36.462Z,1513227756.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:36.486Z,1513227756.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:36.857Z,1513227756.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:36.871Z,1513227756.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:37.253Z,1513227757.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:37.275Z,1513227757.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:37.656Z,1513227757.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:37.677Z,1513227757.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:38.062Z,1513227758.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:38.076Z,1513227758.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:38.458Z,1513227758.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:38.473Z,1513227758.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:38.877Z,1513227758.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:38.918Z,1513227758.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:39.279Z,1513227759.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:39.294Z,1513227759.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:39.678Z,1513227759.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:39.692Z,1513227759.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:40.057Z,1513227760.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:40.085Z,1513227760.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:40.451Z,1513227760.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:40.494Z,1513227760.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:40.858Z,1513227760.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:40.874Z,1513227760.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:41.254Z,1513227761.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:41.273Z,1513227761.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:41.662Z,1513227761.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:41.677Z,1513227761.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:42.067Z,1513227762.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:42.075Z,1513227762.075 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:02:42.076Z,1513227762.076 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:02:42.076Z,1513227762.076 [BPC1](ERROR): Data Fault
2017-12-14T05:02:42.084Z,1513227762.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:42.121Z,1513227762.121 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:02:42.469Z,1513227762.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:42.491Z,1513227762.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:42.863Z,1513227762.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:42.878Z,1513227762.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:46.240Z,1513227766.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:46.269Z,1513227766.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:46.283Z,1513227766.283 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:02:46.283Z,1513227766.283 [BPC1] No Fault, FailCount= 1
2017-12-14T05:02:46.371Z,1513227766.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:46.459Z,1513227766.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:46.747Z,1513227766.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:46.782Z,1513227766.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:47.142Z,1513227767.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:47.163Z,1513227767.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:47.540Z,1513227767.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:47.564Z,1513227767.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:47.925Z,1513227767.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:47.950Z,1513227767.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:48.324Z,1513227768.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:48.351Z,1513227768.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:48.765Z,1513227768.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:48.804Z,1513227768.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:49.137Z,1513227769.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:49.169Z,1513227769.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:49.537Z,1513227769.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:49.559Z,1513227769.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:49.934Z,1513227769.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:49.959Z,1513227769.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:50.324Z,1513227770.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:50.338Z,1513227770.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:50.716Z,1513227770.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:50.731Z,1513227770.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:51.120Z,1513227771.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:51.139Z,1513227771.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:51.523Z,1513227771.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:51.543Z,1513227771.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:51.933Z,1513227771.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:51.951Z,1513227771.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:52.334Z,1513227772.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:52.349Z,1513227772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:52.733Z,1513227772.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:52.751Z,1513227772.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:53.127Z,1513227773.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:53.147Z,1513227773.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:53.526Z,1513227773.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:53.541Z,1513227773.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:53.926Z,1513227773.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:53.941Z,1513227773.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:54.332Z,1513227774.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:54.347Z,1513227774.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:54.754Z,1513227774.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:54.823Z,1513227774.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:55.132Z,1513227775.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:55.152Z,1513227775.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:55.532Z,1513227775.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:55.551Z,1513227775.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:55.934Z,1513227775.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:55.950Z,1513227775.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:56.331Z,1513227776.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:56.346Z,1513227776.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:56.746Z,1513227776.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:56.786Z,1513227776.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:57.132Z,1513227777.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:57.151Z,1513227777.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:57.528Z,1513227777.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:57.543Z,1513227777.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:57.935Z,1513227777.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:57.951Z,1513227777.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:58.341Z,1513227778.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:58.357Z,1513227778.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:58.758Z,1513227778.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:58.793Z,1513227778.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:59.119Z,1513227779.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:59.151Z,1513227779.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:59.520Z,1513227779.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:59.551Z,1513227779.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:02:59.936Z,1513227779.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:02:59.951Z,1513227779.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:00.332Z,1513227780.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:00.348Z,1513227780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:00.745Z,1513227780.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:00.771Z,1513227780.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:01.146Z,1513227781.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:01.174Z,1513227781.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:01.541Z,1513227781.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:01.567Z,1513227781.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:01.942Z,1513227781.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:01.963Z,1513227781.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:02.323Z,1513227782.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:02.355Z,1513227782.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:02.775Z,1513227782.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:02.810Z,1513227782.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:03.126Z,1513227783.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:03.141Z,1513227783.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:03.525Z,1513227783.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:03.540Z,1513227783.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:03.938Z,1513227783.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:03.968Z,1513227783.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:04.388Z,1513227784.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:04.423Z,1513227784.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:04.730Z,1513227784.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:04.751Z,1513227784.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:05.127Z,1513227785.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:05.142Z,1513227785.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:05.530Z,1513227785.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:05.544Z,1513227785.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:05.928Z,1513227785.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:05.942Z,1513227785.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:06.331Z,1513227786.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:06.394Z,1513227786.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:06.733Z,1513227786.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:06.748Z,1513227786.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:07.133Z,1513227787.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:07.194Z,1513227787.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:07.558Z,1513227787.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:07.603Z,1513227787.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:07.934Z,1513227787.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:07.949Z,1513227787.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:08.320Z,1513227788.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:08.367Z,1513227788.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:08.731Z,1513227788.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:08.816Z,1513227788.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:09.131Z,1513227789.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:09.183Z,1513227789.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:09.527Z,1513227789.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:09.548Z,1513227789.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:09.938Z,1513227789.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:09.970Z,1513227789.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:10.341Z,1513227790.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:10.379Z,1513227790.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:10.786Z,1513227790.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:10.835Z,1513227790.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:11.122Z,1513227791.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:11.149Z,1513227791.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:11.543Z,1513227791.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:11.575Z,1513227791.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:11.928Z,1513227791.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:11.947Z,1513227791.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:12.327Z,1513227792.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:12.354Z,1513227792.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:12.742Z,1513227792.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:12.778Z,1513227792.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:13.132Z,1513227793.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:13.156Z,1513227793.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:13.550Z,1513227793.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:13.588Z,1513227793.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:13.956Z,1513227793.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:13.983Z,1513227793.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:14.319Z,1513227794.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:14.351Z,1513227794.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:14.756Z,1513227794.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:14.793Z,1513227794.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:15.124Z,1513227795.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:15.150Z,1513227795.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:15.519Z,1513227795.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:15.551Z,1513227795.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:15.941Z,1513227795.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:15.957Z,1513227795.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:16.341Z,1513227796.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:16.361Z,1513227796.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:16.797Z,1513227796.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:16.828Z,1513227796.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:17.119Z,1513227797.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:17.188Z,1513227797.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:17.526Z,1513227797.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:17.581Z,1513227797.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:17.932Z,1513227797.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:17.947Z,1513227797.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:18.333Z,1513227798.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:18.348Z,1513227798.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:18.733Z,1513227798.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:18.778Z,1513227798.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:19.141Z,1513227799.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:19.172Z,1513227799.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:19.534Z,1513227799.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:19.549Z,1513227799.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:19.930Z,1513227799.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:19.954Z,1513227799.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:20.339Z,1513227800.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:20.375Z,1513227800.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:20.719Z,1513227800.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:20.756Z,1513227800.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:21.120Z,1513227801.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:21.143Z,1513227801.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:21.519Z,1513227801.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:21.556Z,1513227801.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:21.906Z,1513227801.906 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:03:21.906Z,1513227801.906 [NAL9602] Data Fault, FailCount= 5
2017-12-14T05:03:21.906Z,1513227801.906 [NAL9602](ERROR): Data Fault
2017-12-14T05:03:21.923Z,1513227801.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:21.937Z,1513227801.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:21.979Z,1513227801.979 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:03:21.979Z,1513227801.979 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T05:03:22.308Z,1513227802.308 [NAL9602](INFO): Powering down
2017-12-14T05:03:22.325Z,1513227802.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:22.386Z,1513227802.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:22.410Z,1513227802.410 [CBIT](INFO): Critical error at 20171214T050321
2017-12-14T05:03:22.761Z,1513227802.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:22.775Z,1513227802.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:23.128Z,1513227803.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:23.143Z,1513227803.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:23.560Z,1513227803.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:23.592Z,1513227803.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:23.925Z,1513227803.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:23.947Z,1513227803.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:24.314Z,1513227804.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:24.344Z,1513227804.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:24.737Z,1513227804.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:24.781Z,1513227804.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:25.132Z,1513227805.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:25.148Z,1513227805.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:25.537Z,1513227805.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:25.552Z,1513227805.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:25.925Z,1513227805.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:25.941Z,1513227805.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:26.325Z,1513227806.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:26.339Z,1513227806.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:26.780Z,1513227806.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:26.838Z,1513227806.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:27.124Z,1513227807.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:27.143Z,1513227807.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:27.530Z,1513227807.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:27.545Z,1513227807.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:27.926Z,1513227807.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:27.941Z,1513227807.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:28.326Z,1513227808.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:28.342Z,1513227808.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:28.749Z,1513227808.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:28.778Z,1513227808.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:29.122Z,1513227809.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:29.149Z,1513227809.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:29.530Z,1513227809.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:29.546Z,1513227809.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:29.936Z,1513227809.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:30.042Z,1513227810.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:30.318Z,1513227810.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:30.341Z,1513227810.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:30.777Z,1513227810.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:30.848Z,1513227810.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:31.126Z,1513227811.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:31.161Z,1513227811.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:31.526Z,1513227811.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:31.571Z,1513227811.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:31.922Z,1513227811.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:31.936Z,1513227811.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:32.319Z,1513227812.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:32.333Z,1513227812.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:32.722Z,1513227812.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:32.737Z,1513227812.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:33.118Z,1513227813.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:33.139Z,1513227813.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:33.531Z,1513227813.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:33.559Z,1513227813.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:33.559Z,1513227813.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2017-12-14T05:03:33.559Z,1513227813.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:03:33.561Z,1513227813.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:33.561Z,1513227813.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2017-12-14T05:03:33.561Z,1513227813.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:03:33.563Z,1513227813.563 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:33.563Z,1513227813.563 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2017-12-14T05:03:33.563Z,1513227813.563 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:03:33.574Z,1513227813.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:03:33.575Z,1513227813.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:03:33.575Z,1513227813.575 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:03:33.924Z,1513227813.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:33.964Z,1513227813.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:03:33.964Z,1513227813.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2017-12-14T05:03:33.965Z,1513227813.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:03:33.965Z,1513227813.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2017-12-14T05:03:33.965Z,1513227813.965 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:03:33.965Z,1513227813.965 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2017-12-14T05:03:34.230Z,1513227814.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:34.331Z,1513227814.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:34.353Z,1513227814.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:03:34.354Z,1513227814.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:03:34.354Z,1513227814.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:03:34.361Z,1513227814.361 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:03:34.361Z,1513227814.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:03:34.362Z,1513227814.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:03:34.362Z,1513227814.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:03:34.362Z,1513227814.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:03:34.363Z,1513227814.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:03:34.730Z,1513227814.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:34.746Z,1513227814.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:35.027Z,1513227815.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:35.140Z,1513227815.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:35.184Z,1513227815.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:35.470Z,1513227815.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:35.526Z,1513227815.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:35.541Z,1513227815.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:35.925Z,1513227815.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:35.939Z,1513227815.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:36.361Z,1513227816.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:36.427Z,1513227816.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:36.741Z,1513227816.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:36.773Z,1513227816.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:37.134Z,1513227817.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:37.158Z,1513227817.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:37.523Z,1513227817.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:37.537Z,1513227817.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:37.928Z,1513227817.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:37.947Z,1513227817.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:38.327Z,1513227818.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:38.341Z,1513227818.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:38.743Z,1513227818.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:38.773Z,1513227818.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:39.128Z,1513227819.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:39.152Z,1513227819.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:39.550Z,1513227819.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:39.598Z,1513227819.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:39.919Z,1513227819.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:39.972Z,1513227819.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:40.329Z,1513227820.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:40.344Z,1513227820.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:40.733Z,1513227820.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:40.779Z,1513227820.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:41.131Z,1513227821.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:41.146Z,1513227821.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:41.532Z,1513227821.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:41.547Z,1513227821.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:41.925Z,1513227821.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:41.941Z,1513227821.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:41.944Z,1513227821.944 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:03:41.944Z,1513227821.944 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:03:41.944Z,1513227821.944 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:03:41.944Z,1513227821.944 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:03:42.323Z,1513227822.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:42.338Z,1513227822.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:42.341Z,1513227822.341 [Default:CheckIn:D] Stopped
2017-12-14T05:03:42.341Z,1513227822.341 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:03:42.771Z,1513227822.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:42.810Z,1513227822.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:42.814Z,1513227822.814 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 270.449186 min 
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn:E] Stopped
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn] Stopped
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn](INFO): Running loop #27
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn] Running Loop=27
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:03:42.815Z,1513227822.815 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:03:43.139Z,1513227823.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:43.167Z,1513227823.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:46.521Z,1513227826.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:46.536Z,1513227826.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:46.635Z,1513227826.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:46.683Z,1513227826.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:47.021Z,1513227827.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:47.083Z,1513227827.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:47.390Z,1513227827.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:47.405Z,1513227827.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:47.788Z,1513227827.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:47.803Z,1513227827.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:48.191Z,1513227828.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:48.205Z,1513227828.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:48.587Z,1513227828.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:48.603Z,1513227828.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:49.011Z,1513227829.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:49.083Z,1513227829.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:49.390Z,1513227829.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:49.411Z,1513227829.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:49.790Z,1513227829.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:49.805Z,1513227829.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:50.192Z,1513227830.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:50.258Z,1513227830.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:50.594Z,1513227830.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:50.608Z,1513227830.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:50.982Z,1513227830.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:51.020Z,1513227831.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:51.382Z,1513227831.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:51.413Z,1513227831.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:51.782Z,1513227831.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:51.805Z,1513227831.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:52.176Z,1513227832.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:52.210Z,1513227832.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:52.582Z,1513227832.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:52.610Z,1513227832.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:52.982Z,1513227832.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:53.014Z,1513227833.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:53.386Z,1513227833.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:53.409Z,1513227833.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:53.786Z,1513227833.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:53.811Z,1513227833.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:54.183Z,1513227834.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:54.208Z,1513227834.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:54.579Z,1513227834.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:54.617Z,1513227834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:54.982Z,1513227834.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:54.990Z,1513227834.990 [BPC1](ERROR): Failed to receive battery data
2017-12-14T05:03:54.990Z,1513227834.990 [BPC1] Communications Fault, FailCount= 1
2017-12-14T05:03:54.990Z,1513227834.990 [BPC1](ERROR): Communications Fault
2017-12-14T05:03:55.004Z,1513227835.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:55.054Z,1513227835.054 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T05:03:55.434Z,1513227835.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:55.491Z,1513227835.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:55.790Z,1513227835.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:55.804Z,1513227835.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:56.187Z,1513227836.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:56.202Z,1513227836.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:56.232Z,1513227836.232 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:03:56.232Z,1513227836.232 [BPC1] No Fault, FailCount= 1
2017-12-14T05:03:56.594Z,1513227836.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:56.728Z,1513227836.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:56.987Z,1513227836.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:57.002Z,1513227837.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:57.391Z,1513227837.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:57.408Z,1513227837.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:57.786Z,1513227837.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:57.801Z,1513227837.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:58.186Z,1513227838.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:58.200Z,1513227838.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:58.638Z,1513227838.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:58.738Z,1513227838.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:59.002Z,1513227839.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:59.016Z,1513227839.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:59.383Z,1513227839.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:59.414Z,1513227839.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:03:59.786Z,1513227839.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:03:59.812Z,1513227839.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:00.182Z,1513227840.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:00.213Z,1513227840.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:00.579Z,1513227840.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:00.605Z,1513227840.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:00.998Z,1513227840.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:01.079Z,1513227841.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:01.388Z,1513227841.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:01.407Z,1513227841.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:01.782Z,1513227841.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:01.797Z,1513227841.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:02.191Z,1513227842.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:02.208Z,1513227842.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:02.588Z,1513227842.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:02.602Z,1513227842.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:03.030Z,1513227843.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:03.097Z,1513227843.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:03.393Z,1513227843.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:03.408Z,1513227843.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:03.791Z,1513227843.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:03.920Z,1513227843.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:04.182Z,1513227844.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:04.198Z,1513227844.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:04.591Z,1513227844.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:04.612Z,1513227844.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:05.015Z,1513227845.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:05.071Z,1513227845.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:05.382Z,1513227845.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:05.419Z,1513227845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:05.784Z,1513227845.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:05.809Z,1513227845.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:06.183Z,1513227846.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:06.208Z,1513227846.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:06.582Z,1513227846.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:06.615Z,1513227846.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:06.988Z,1513227846.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:07.003Z,1513227847.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:07.390Z,1513227847.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:07.405Z,1513227847.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:07.784Z,1513227847.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:07.798Z,1513227847.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:08.200Z,1513227848.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:08.243Z,1513227848.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:08.592Z,1513227848.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:08.606Z,1513227848.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:08.982Z,1513227848.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:09.016Z,1513227849.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:09.383Z,1513227849.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:09.407Z,1513227849.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:09.782Z,1513227849.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:09.814Z,1513227849.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:10.179Z,1513227850.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:10.205Z,1513227850.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:10.596Z,1513227850.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:10.610Z,1513227850.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:10.982Z,1513227850.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:11.020Z,1513227851.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:11.382Z,1513227851.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:11.439Z,1513227851.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:11.792Z,1513227851.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:11.808Z,1513227851.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:12.192Z,1513227852.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:12.207Z,1513227852.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:12.592Z,1513227852.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:12.611Z,1513227852.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:12.993Z,1513227852.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:13.015Z,1513227853.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:13.391Z,1513227853.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:13.408Z,1513227853.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:13.789Z,1513227853.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:13.803Z,1513227853.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:14.193Z,1513227854.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:14.208Z,1513227854.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:14.632Z,1513227854.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:14.691Z,1513227854.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:15.047Z,1513227855.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:15.079Z,1513227855.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:15.383Z,1513227855.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:15.419Z,1513227855.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:15.782Z,1513227855.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:15.843Z,1513227855.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:16.190Z,1513227856.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:16.240Z,1513227856.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:16.591Z,1513227856.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:16.629Z,1513227856.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:17.013Z,1513227857.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:17.108Z,1513227857.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:17.395Z,1513227857.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:17.410Z,1513227857.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:17.795Z,1513227857.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:17.859Z,1513227857.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:18.189Z,1513227858.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:18.211Z,1513227858.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:18.582Z,1513227858.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:18.598Z,1513227858.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:18.982Z,1513227858.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:19.019Z,1513227859.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:19.382Z,1513227859.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:19.409Z,1513227859.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:19.786Z,1513227859.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:19.800Z,1513227859.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:20.175Z,1513227860.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:20.191Z,1513227860.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:20.582Z,1513227860.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:20.600Z,1513227860.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:20.988Z,1513227860.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:21.085Z,1513227861.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:21.390Z,1513227861.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:21.411Z,1513227861.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:21.790Z,1513227861.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:21.841Z,1513227861.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:22.185Z,1513227862.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:22.199Z,1513227862.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:22.587Z,1513227862.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:22.602Z,1513227862.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:22.982Z,1513227862.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:23.015Z,1513227863.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:23.382Z,1513227863.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:23.414Z,1513227863.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:23.786Z,1513227863.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:23.810Z,1513227863.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:24.210Z,1513227864.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:24.266Z,1513227864.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:24.582Z,1513227864.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:24.611Z,1513227864.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:24.982Z,1513227864.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:24.997Z,1513227864.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:25.390Z,1513227865.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:25.421Z,1513227865.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:25.790Z,1513227865.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:25.804Z,1513227865.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:26.186Z,1513227866.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:26.239Z,1513227866.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:26.587Z,1513227866.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:26.604Z,1513227866.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:26.992Z,1513227866.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:27.006Z,1513227867.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:27.424Z,1513227867.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:27.443Z,1513227867.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:27.789Z,1513227867.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:27.803Z,1513227867.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:28.193Z,1513227868.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:28.207Z,1513227868.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:28.587Z,1513227868.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:28.602Z,1513227868.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:29.024Z,1513227869.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:29.092Z,1513227869.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:29.394Z,1513227869.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:29.408Z,1513227869.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:29.793Z,1513227869.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:29.809Z,1513227869.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:30.189Z,1513227870.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:30.211Z,1513227870.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:30.607Z,1513227870.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:30.670Z,1513227870.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:31.034Z,1513227871.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:31.103Z,1513227871.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:31.386Z,1513227871.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:31.421Z,1513227871.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:31.787Z,1513227871.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:31.801Z,1513227871.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:32.179Z,1513227872.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:32.194Z,1513227872.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:32.582Z,1513227872.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:32.597Z,1513227872.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:32.000Z,1513227873.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:33.019Z,1513227873.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:33.390Z,1513227873.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:33.409Z,1513227873.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:33.831Z,1513227873.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:33.878Z,1513227873.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:34.197Z,1513227874.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:34.212Z,1513227874.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:34.589Z,1513227874.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:34.604Z,1513227874.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:34.982Z,1513227874.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:35.017Z,1513227875.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:35.386Z,1513227875.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:35.416Z,1513227875.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:35.783Z,1513227875.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:35.797Z,1513227875.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:36.187Z,1513227876.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:36.201Z,1513227876.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:36.586Z,1513227876.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:36.722Z,1513227876.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:36.988Z,1513227876.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:37.042Z,1513227877.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:37.390Z,1513227877.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:37.411Z,1513227877.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:37.791Z,1513227877.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:37.806Z,1513227877.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:38.202Z,1513227878.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:38.247Z,1513227878.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:38.587Z,1513227878.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:38.606Z,1513227878.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:38.982Z,1513227878.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:39.031Z,1513227879.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:39.382Z,1513227879.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:39.413Z,1513227879.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:39.786Z,1513227879.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:39.818Z,1513227879.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:40.175Z,1513227880.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:40.190Z,1513227880.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:40.582Z,1513227880.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:40.596Z,1513227880.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:40.987Z,1513227880.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:41.022Z,1513227881.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:41.382Z,1513227881.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:41.397Z,1513227881.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:41.790Z,1513227881.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:41.821Z,1513227881.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:42.188Z,1513227882.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:42.202Z,1513227882.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:42.584Z,1513227882.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:42.599Z,1513227882.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:43.034Z,1513227883.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:43.093Z,1513227883.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:43.394Z,1513227883.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:43.442Z,1513227883.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:44.250Z,1513227884.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:45.047Z,1513227885.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:45.449Z,1513227885.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:46.902Z,1513227886.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:46.933Z,1513227886.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:47.030Z,1513227887.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:47.091Z,1513227887.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:47.386Z,1513227887.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:47.400Z,1513227887.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:47.789Z,1513227887.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:47.811Z,1513227887.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:48.184Z,1513227888.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:48.199Z,1513227888.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:48.586Z,1513227888.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:48.601Z,1513227888.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:48.978Z,1513227888.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:49.009Z,1513227889.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:49.378Z,1513227889.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:49.393Z,1513227889.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:49.784Z,1513227889.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:49.799Z,1513227889.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:50.185Z,1513227890.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:50.200Z,1513227890.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:50.588Z,1513227890.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:50.611Z,1513227890.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:50.987Z,1513227890.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:51.007Z,1513227891.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:51.386Z,1513227891.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:51.407Z,1513227891.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:51.790Z,1513227891.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:51.806Z,1513227891.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:52.186Z,1513227892.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:52.207Z,1513227892.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:52.575Z,1513227892.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:52.608Z,1513227892.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:53.033Z,1513227893.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:53.072Z,1513227893.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:53.390Z,1513227893.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:53.405Z,1513227893.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:53.779Z,1513227893.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:53.795Z,1513227893.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:54.190Z,1513227894.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:54.223Z,1513227894.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:54.587Z,1513227894.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:54.622Z,1513227894.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:54.985Z,1513227894.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:55.027Z,1513227895.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:55.384Z,1513227895.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:55.399Z,1513227895.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:55.786Z,1513227895.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:55.801Z,1513227895.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:56.183Z,1513227896.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:56.203Z,1513227896.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:56.584Z,1513227896.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:56.607Z,1513227896.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:57.032Z,1513227897.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:57.094Z,1513227897.094 [BPC1](ERROR): Failed to parse message.
2017-12-14T05:04:57.094Z,1513227897.094 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:04:57.094Z,1513227897.094 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:04:57.094Z,1513227897.094 [BPC1](ERROR): Data Fault
2017-12-14T05:04:57.136Z,1513227897.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:57.174Z,1513227897.174 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:04:57.395Z,1513227897.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:57.411Z,1513227897.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:57.790Z,1513227897.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:57.806Z,1513227897.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:58.190Z,1513227898.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:58.204Z,1513227898.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:58.218Z,1513227898.218 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:04:58.218Z,1513227898.218 [BPC1] No Fault, FailCount= 1
2017-12-14T05:04:58.258Z,1513227898.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:58.584Z,1513227898.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:58.655Z,1513227898.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:59.039Z,1513227899.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:59.054Z,1513227899.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:59.090Z,1513227899.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:59.388Z,1513227899.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:59.406Z,1513227899.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:04:59.457Z,1513227899.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:59.786Z,1513227899.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:04:59.800Z,1513227899.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:00.175Z,1513227900.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:00.201Z,1513227900.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:00.588Z,1513227900.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:00.607Z,1513227900.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:00.978Z,1513227900.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:01.005Z,1513227901.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:01.378Z,1513227901.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:01.393Z,1513227901.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:01.784Z,1513227901.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:01.820Z,1513227901.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:02.172Z,1513227902.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:02.199Z,1513227902.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:02.587Z,1513227902.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:02.601Z,1513227902.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:02.978Z,1513227902.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:03.004Z,1513227903.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:03.416Z,1513227903.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:03.466Z,1513227903.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:03.775Z,1513227903.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:03.806Z,1513227903.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:04.182Z,1513227904.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:04.207Z,1513227904.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:04.575Z,1513227904.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:04.612Z,1513227904.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:04.987Z,1513227904.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:05.015Z,1513227905.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:05.390Z,1513227905.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:05.404Z,1513227905.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:05.785Z,1513227905.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:05.807Z,1513227905.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:06.188Z,1513227906.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:06.203Z,1513227906.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:06.606Z,1513227906.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:06.700Z,1513227906.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:06.986Z,1513227906.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:07.041Z,1513227907.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:07.390Z,1513227907.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:07.405Z,1513227907.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:07.785Z,1513227907.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:07.812Z,1513227907.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:08.189Z,1513227908.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:08.204Z,1513227908.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:08.588Z,1513227908.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:08.603Z,1513227908.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:08.984Z,1513227908.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:09.007Z,1513227909.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:09.390Z,1513227909.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:09.404Z,1513227909.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:09.790Z,1513227909.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:09.805Z,1513227909.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:10.187Z,1513227910.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:10.207Z,1513227910.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:10.575Z,1513227910.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:10.596Z,1513227910.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:11.015Z,1513227911.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:11.074Z,1513227911.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:11.382Z,1513227911.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:11.409Z,1513227911.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:11.786Z,1513227911.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:11.800Z,1513227911.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:12.176Z,1513227912.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:12.191Z,1513227912.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:12.595Z,1513227912.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:12.623Z,1513227912.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:13.074Z,1513227913.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:13.114Z,1513227913.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:13.385Z,1513227913.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:13.406Z,1513227913.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:13.787Z,1513227913.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:13.807Z,1513227913.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:14.190Z,1513227914.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:14.205Z,1513227914.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:14.246Z,1513227914.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:14.587Z,1513227914.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:14.602Z,1513227914.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:14.978Z,1513227914.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:15.016Z,1513227915.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:15.041Z,1513227915.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:15.379Z,1513227915.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:15.394Z,1513227915.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:15.445Z,1513227915.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:15.784Z,1513227915.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:15.798Z,1513227915.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:16.186Z,1513227916.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:16.201Z,1513227916.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:16.594Z,1513227916.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:16.626Z,1513227916.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:16.987Z,1513227916.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:17.006Z,1513227917.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:17.384Z,1513227917.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:17.400Z,1513227917.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:17.788Z,1513227917.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:17.850Z,1513227917.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:18.188Z,1513227918.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:18.254Z,1513227918.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:18.588Z,1513227918.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:18.604Z,1513227918.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:18.992Z,1513227918.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:19.028Z,1513227919.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:19.414Z,1513227919.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:19.472Z,1513227919.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:19.778Z,1513227919.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:19.808Z,1513227919.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:20.175Z,1513227920.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:20.215Z,1513227920.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:20.578Z,1513227920.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:20.604Z,1513227920.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:20.978Z,1513227920.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:21.010Z,1513227921.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:21.378Z,1513227921.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:21.413Z,1513227921.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:21.778Z,1513227921.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:21.793Z,1513227921.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:22.183Z,1513227922.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:22.223Z,1513227922.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:22.237Z,1513227922.237 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T05:05:22.237Z,1513227922.237 [NAL9602] No Fault, FailCount= 5
2017-12-14T05:05:22.568Z,1513227922.568 [NAL9602](INFO): Powering up NAL9602
2017-12-14T05:05:22.618Z,1513227922.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:22.677Z,1513227922.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:22.988Z,1513227922.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:23.002Z,1513227923.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:23.380Z,1513227923.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:23.413Z,1513227923.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:23.789Z,1513227923.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:23.804Z,1513227923.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:24.186Z,1513227924.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:24.202Z,1513227924.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:24.584Z,1513227924.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:24.608Z,1513227924.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:25.034Z,1513227925.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:25.090Z,1513227925.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:25.386Z,1513227925.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:25.401Z,1513227925.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:25.800Z,1513227925.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:25.900Z,1513227925.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:26.186Z,1513227926.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:26.200Z,1513227926.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:26.584Z,1513227926.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:26.599Z,1513227926.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:26.980Z,1513227926.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:27.071Z,1513227927.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:27.382Z,1513227927.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:27.408Z,1513227927.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:27.783Z,1513227927.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:27.810Z,1513227927.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:28.178Z,1513227928.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:28.211Z,1513227928.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:28.579Z,1513227928.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:28.624Z,1513227928.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:28.986Z,1513227928.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:29.007Z,1513227929.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:29.379Z,1513227929.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:29.406Z,1513227929.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:29.781Z,1513227929.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:29.807Z,1513227929.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:30.184Z,1513227930.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:30.212Z,1513227930.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:30.578Z,1513227930.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:30.611Z,1513227930.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:30.987Z,1513227930.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:31.025Z,1513227931.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:31.385Z,1513227931.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:31.413Z,1513227931.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:31.778Z,1513227931.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:31.806Z,1513227931.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:32.210Z,1513227932.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:32.256Z,1513227932.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:32.579Z,1513227932.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:32.613Z,1513227932.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:32.986Z,1513227932.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:33.008Z,1513227933.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:33.396Z,1513227933.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:33.414Z,1513227933.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:33.766Z,1513227933.766 [NAL9602](INFO): NAL9602 initialized
2017-12-14T05:05:33.794Z,1513227933.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:33.809Z,1513227933.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:34.188Z,1513227934.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:34.202Z,1513227934.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:34.597Z,1513227934.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:34.612Z,1513227934.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:35.002Z,1513227935.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:35.017Z,1513227935.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:35.400Z,1513227935.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:35.445Z,1513227935.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:35.798Z,1513227935.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:35.816Z,1513227935.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:36.179Z,1513227936.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:36.210Z,1513227936.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:36.582Z,1513227936.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:36.614Z,1513227936.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:36.990Z,1513227936.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:37.018Z,1513227937.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:37.402Z,1513227937.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:37.422Z,1513227937.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:37.802Z,1513227937.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:37.818Z,1513227937.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:38.179Z,1513227938.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:38.214Z,1513227938.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:38.578Z,1513227938.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:38.635Z,1513227938.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:39.043Z,1513227939.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:39.079Z,1513227939.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:39.393Z,1513227939.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:39.439Z,1513227939.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:39.787Z,1513227939.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:39.854Z,1513227939.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:40.201Z,1513227940.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:40.234Z,1513227940.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:40.597Z,1513227940.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:40.612Z,1513227940.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:41.002Z,1513227941.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:41.101Z,1513227941.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:41.389Z,1513227941.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:41.403Z,1513227941.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:41.822Z,1513227941.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:41.891Z,1513227941.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:42.186Z,1513227942.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:42.200Z,1513227942.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:42.586Z,1513227942.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:42.601Z,1513227942.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:42.992Z,1513227942.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:43.023Z,1513227943.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:43.399Z,1513227943.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:43.415Z,1513227943.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:43.800Z,1513227943.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:43.815Z,1513227943.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:47.443Z,1513227947.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:47.458Z,1513227947.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:47.556Z,1513227947.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:47.597Z,1513227947.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:47.926Z,1513227947.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:47.959Z,1513227947.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:48.340Z,1513227948.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:48.355Z,1513227948.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:48.758Z,1513227948.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:48.809Z,1513227948.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:49.120Z,1513227949.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:49.135Z,1513227949.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:49.517Z,1513227949.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:49.531Z,1513227949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:49.913Z,1513227949.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:49.970Z,1513227949.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:50.319Z,1513227950.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:50.334Z,1513227950.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:50.778Z,1513227950.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:50.805Z,1513227950.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:51.120Z,1513227951.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:51.140Z,1513227951.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:51.526Z,1513227951.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:51.561Z,1513227951.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:51.993Z,1513227951.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:52.055Z,1513227952.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:52.316Z,1513227952.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:52.346Z,1513227952.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:52.714Z,1513227952.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:52.746Z,1513227952.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:53.138Z,1513227953.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:53.155Z,1513227953.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:53.513Z,1513227953.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:53.540Z,1513227953.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:53.921Z,1513227953.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:53.950Z,1513227953.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:54.337Z,1513227954.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:54.352Z,1513227954.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:54.723Z,1513227954.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:54.775Z,1513227954.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:55.118Z,1513227955.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:55.171Z,1513227955.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:55.517Z,1513227955.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:55.535Z,1513227955.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:55.912Z,1513227955.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:55.927Z,1513227955.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:56.319Z,1513227956.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:56.335Z,1513227956.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:56.757Z,1513227956.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:56.772Z,1513227956.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:57.123Z,1513227957.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:57.161Z,1513227957.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:57.525Z,1513227957.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:57.599Z,1513227957.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:57.921Z,1513227957.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:57.936Z,1513227957.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:58.333Z,1513227958.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:58.370Z,1513227958.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:58.730Z,1513227958.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:58.774Z,1513227958.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:59.118Z,1513227959.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:59.133Z,1513227959.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:59.510Z,1513227959.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:59.543Z,1513227959.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:05:59.922Z,1513227959.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:05:59.938Z,1513227959.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:00.325Z,1513227960.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:00.384Z,1513227960.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:00.764Z,1513227960.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:00.783Z,1513227960.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:01.112Z,1513227961.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:01.142Z,1513227961.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:01.541Z,1513227961.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:01.561Z,1513227961.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:01.944Z,1513227961.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:01.999Z,1513227961.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:02.311Z,1513227962.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:02.334Z,1513227962.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:02.730Z,1513227962.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:02.787Z,1513227962.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:03.133Z,1513227963.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:03.151Z,1513227963.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:03.533Z,1513227963.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:03.548Z,1513227963.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:03.924Z,1513227963.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:03.951Z,1513227963.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:04.300Z,1513227964.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:04.334Z,1513227964.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:04.792Z,1513227964.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:04.862Z,1513227964.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:05.118Z,1513227965.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:05.160Z,1513227965.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:05.515Z,1513227965.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:05.535Z,1513227965.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:05.929Z,1513227965.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:05.963Z,1513227965.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:06.330Z,1513227966.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:06.344Z,1513227966.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:06.730Z,1513227966.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:06.764Z,1513227966.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:07.114Z,1513227967.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:07.135Z,1513227967.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:07.517Z,1513227967.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:07.531Z,1513227967.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:07.915Z,1513227967.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:07.930Z,1513227967.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:08.330Z,1513227968.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:08.346Z,1513227968.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:08.716Z,1513227968.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:08.743Z,1513227968.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:09.125Z,1513227969.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:09.148Z,1513227969.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:09.526Z,1513227969.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:09.547Z,1513227969.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:09.931Z,1513227969.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:09.951Z,1513227969.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:10.301Z,1513227970.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:10.328Z,1513227970.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:10.736Z,1513227970.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:10.776Z,1513227970.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:11.145Z,1513227971.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:11.203Z,1513227971.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:11.507Z,1513227971.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:11.547Z,1513227971.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:11.926Z,1513227971.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:11.952Z,1513227971.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:12.337Z,1513227972.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:12.359Z,1513227972.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:12.755Z,1513227972.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:12.770Z,1513227972.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:13.120Z,1513227973.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:13.155Z,1513227973.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:13.514Z,1513227973.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:13.536Z,1513227973.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:13.916Z,1513227973.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:13.931Z,1513227973.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:14.340Z,1513227974.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:14.371Z,1513227974.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:14.750Z,1513227974.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:14.769Z,1513227974.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:15.118Z,1513227975.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:15.139Z,1513227975.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:15.529Z,1513227975.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:15.564Z,1513227975.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:15.928Z,1513227975.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:15.943Z,1513227975.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:16.317Z,1513227976.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:16.332Z,1513227976.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:16.739Z,1513227976.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:16.772Z,1513227976.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:17.117Z,1513227977.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:17.187Z,1513227977.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:17.527Z,1513227977.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:17.559Z,1513227977.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:17.937Z,1513227977.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:17.953Z,1513227977.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:18.329Z,1513227978.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:18.344Z,1513227978.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:18.772Z,1513227978.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:18.847Z,1513227978.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:19.128Z,1513227979.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:19.183Z,1513227979.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:19.523Z,1513227979.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:19.539Z,1513227979.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:19.918Z,1513227979.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:19.985Z,1513227979.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:20.314Z,1513227980.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:20.359Z,1513227980.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:20.757Z,1513227980.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:20.788Z,1513227980.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:21.171Z,1513227981.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:21.203Z,1513227981.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:21.561Z,1513227981.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:21.604Z,1513227981.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:21.950Z,1513227981.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:22.010Z,1513227982.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:22.318Z,1513227982.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:22.365Z,1513227982.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:22.716Z,1513227982.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:22.775Z,1513227982.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:23.115Z,1513227983.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:23.194Z,1513227983.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:23.510Z,1513227983.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:23.548Z,1513227983.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:23.920Z,1513227983.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:23.988Z,1513227983.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:24.332Z,1513227984.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:24.411Z,1513227984.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:24.794Z,1513227984.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:24.882Z,1513227984.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:25.125Z,1513227985.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:25.160Z,1513227985.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:25.518Z,1513227985.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:25.572Z,1513227985.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:25.914Z,1513227985.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:25.937Z,1513227985.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:26.317Z,1513227986.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:26.373Z,1513227986.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:26.748Z,1513227986.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:26.825Z,1513227986.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:27.143Z,1513227987.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:27.174Z,1513227987.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:27.529Z,1513227987.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:27.544Z,1513227987.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:27.933Z,1513227987.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:27.956Z,1513227987.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:28.308Z,1513227988.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:28.352Z,1513227988.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:28.746Z,1513227988.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:28.776Z,1513227988.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:29.146Z,1513227989.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:29.162Z,1513227989.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:29.513Z,1513227989.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:29.557Z,1513227989.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:29.925Z,1513227989.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:29.946Z,1513227989.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:30.325Z,1513227990.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:30.348Z,1513227990.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:30.766Z,1513227990.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:30.834Z,1513227990.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:31.129Z,1513227991.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:31.172Z,1513227991.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:31.517Z,1513227991.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:31.573Z,1513227991.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:31.917Z,1513227991.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:31.944Z,1513227991.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:32.326Z,1513227992.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:32.347Z,1513227992.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:32.730Z,1513227992.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:32.826Z,1513227992.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:33.123Z,1513227993.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:33.183Z,1513227993.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:33.532Z,1513227993.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:33.599Z,1513227993.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:33.952Z,1513227993.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:34.019Z,1513227994.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:34.317Z,1513227994.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:34.370Z,1513227994.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:34.370Z,1513227994.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2017-12-14T05:06:34.370Z,1513227994.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:06:34.372Z,1513227994.372 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:34.372Z,1513227994.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2017-12-14T05:06:34.372Z,1513227994.372 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:06:34.382Z,1513227994.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:34.382Z,1513227994.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2017-12-14T05:06:34.382Z,1513227994.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:06:34.439Z,1513227994.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:06:34.439Z,1513227994.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:06:34.439Z,1513227994.439 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:06:34.715Z,1513227994.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:34.820Z,1513227994.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:06:34.820Z,1513227994.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2017-12-14T05:06:34.820Z,1513227994.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:06:34.820Z,1513227994.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2017-12-14T05:06:34.825Z,1513227994.825 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:06:34.825Z,1513227994.825 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2017-12-14T05:06:35.119Z,1513227995.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:35.150Z,1513227995.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:06:35.151Z,1513227995.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:06:35.151Z,1513227995.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:06:35.151Z,1513227995.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:06:35.152Z,1513227995.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:06:35.152Z,1513227995.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:06:35.173Z,1513227995.173 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:06:35.173Z,1513227995.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:06:35.174Z,1513227995.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:06:35.508Z,1513227995.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:35.581Z,1513227995.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:35.919Z,1513227995.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:35.949Z,1513227995.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:36.333Z,1513227996.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:36.390Z,1513227996.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:36.720Z,1513227996.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:36.756Z,1513227996.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:37.116Z,1513227997.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:37.169Z,1513227997.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:37.523Z,1513227997.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:37.602Z,1513227997.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:37.908Z,1513227997.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:37.957Z,1513227997.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:38.314Z,1513227998.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:38.362Z,1513227998.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:38.756Z,1513227998.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:38.811Z,1513227998.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:39.118Z,1513227999.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:39.163Z,1513227999.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:39.527Z,1513227999.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:39.548Z,1513227999.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:39.941Z,1513227999.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:39.981Z,1513227999.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:40.318Z,1513228000.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:40.341Z,1513228000.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:40.812Z,1513228000.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:40.863Z,1513228000.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:41.118Z,1513228001.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:41.150Z,1513228001.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:41.515Z,1513228001.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:41.551Z,1513228001.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:41.925Z,1513228001.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:41.950Z,1513228001.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:42.338Z,1513228002.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:42.353Z,1513228002.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:42.755Z,1513228002.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:42.771Z,1513228002.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:43.118Z,1513228003.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:43.142Z,1513228003.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:43.514Z,1513228003.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:43.529Z,1513228003.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:43.915Z,1513228003.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:43.935Z,1513228003.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:47.456Z,1513228007.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:47.547Z,1513228007.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:47.627Z,1513228007.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:47.650Z,1513228007.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:48.033Z,1513228008.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:48.073Z,1513228008.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:48.429Z,1513228008.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:48.473Z,1513228008.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:48.828Z,1513228008.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:48.883Z,1513228008.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:49.213Z,1513228009.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:49.243Z,1513228009.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:49.614Z,1513228009.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:49.647Z,1513228009.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:50.014Z,1513228010.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:50.036Z,1513228010.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:50.416Z,1513228010.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:50.447Z,1513228010.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:50.825Z,1513228010.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:50.848Z,1513228010.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:51.233Z,1513228011.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:51.248Z,1513228011.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:51.626Z,1513228011.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:51.670Z,1513228011.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:52.022Z,1513228012.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:52.050Z,1513228012.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:52.418Z,1513228012.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:52.440Z,1513228012.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:52.831Z,1513228012.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:52.851Z,1513228012.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:53.230Z,1513228013.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:53.272Z,1513228013.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:53.627Z,1513228013.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:53.680Z,1513228013.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:54.016Z,1513228014.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:54.041Z,1513228014.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:54.424Z,1513228014.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:54.443Z,1513228014.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:54.825Z,1513228014.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:54.873Z,1513228014.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:55.225Z,1513228015.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:55.262Z,1513228015.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:55.628Z,1513228015.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:55.650Z,1513228015.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:56.024Z,1513228016.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:56.043Z,1513228016.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:56.420Z,1513228016.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:56.443Z,1513228016.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:56.827Z,1513228016.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:56.859Z,1513228016.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:57.243Z,1513228017.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:57.302Z,1513228017.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:57.634Z,1513228017.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:57.649Z,1513228017.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:58.011Z,1513228018.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:58.052Z,1513228018.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:58.415Z,1513228018.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:58.452Z,1513228018.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:58.847Z,1513228018.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:58.862Z,1513228018.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:59.237Z,1513228019.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:59.260Z,1513228019.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:06:59.626Z,1513228019.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:06:59.667Z,1513228019.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:00.067Z,1513228020.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:00.118Z,1513228020.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:00.412Z,1513228020.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:00.455Z,1513228020.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:00.826Z,1513228020.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:00.856Z,1513228020.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:01.249Z,1513228021.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:01.314Z,1513228021.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:01.629Z,1513228021.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:01.665Z,1513228021.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:02.019Z,1513228022.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:02.060Z,1513228022.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:02.417Z,1513228022.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:02.439Z,1513228022.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:02.826Z,1513228022.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:02.865Z,1513228022.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:03.280Z,1513228023.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:03.322Z,1513228023.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:03.626Z,1513228023.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:03.667Z,1513228023.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:04.026Z,1513228024.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:04.035Z,1513228024.035 [PNI_TCM](ERROR): CRC does not match. Expected:0x41606 got:0x16897
2017-12-14T05:07:04.072Z,1513228024.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:04.422Z,1513228024.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:04.471Z,1513228024.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:04.858Z,1513228024.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:04.885Z,1513228024.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:05.227Z,1513228025.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:05.249Z,1513228025.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:05.634Z,1513228025.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:05.655Z,1513228025.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:06.020Z,1513228026.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:06.053Z,1513228026.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:06.436Z,1513228026.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:06.483Z,1513228026.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:06.832Z,1513228026.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:06.853Z,1513228026.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:07.239Z,1513228027.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:07.259Z,1513228027.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:07.632Z,1513228027.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:07.680Z,1513228027.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:08.011Z,1513228028.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:08.038Z,1513228028.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:08.407Z,1513228028.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:08.458Z,1513228028.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:08.833Z,1513228028.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:08.855Z,1513228028.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:09.234Z,1513228029.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:09.325Z,1513228029.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:09.682Z,1513228029.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:09.763Z,1513228029.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:10.015Z,1513228030.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:10.054Z,1513228030.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:10.415Z,1513228030.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:10.476Z,1513228030.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:10.814Z,1513228030.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:10.835Z,1513228030.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:11.210Z,1513228031.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:11.263Z,1513228031.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:11.616Z,1513228031.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:11.633Z,1513228031.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:12.020Z,1513228032.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:12.041Z,1513228032.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:12.420Z,1513228032.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:12.444Z,1513228032.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:12.820Z,1513228032.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:12.872Z,1513228032.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:13.215Z,1513228033.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:13.247Z,1513228033.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:13.617Z,1513228033.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:13.639Z,1513228033.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:14.008Z,1513228034.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:14.047Z,1513228034.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:14.418Z,1513228034.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:14.433Z,1513228034.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:14.825Z,1513228034.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:14.848Z,1513228034.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:15.235Z,1513228035.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:15.250Z,1513228035.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:15.629Z,1513228035.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:15.671Z,1513228035.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:16.049Z,1513228036.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:16.106Z,1513228036.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:16.407Z,1513228036.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:16.467Z,1513228036.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:16.831Z,1513228036.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:16.856Z,1513228036.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:17.227Z,1513228037.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:17.290Z,1513228037.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:17.628Z,1513228037.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:17.651Z,1513228037.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:18.020Z,1513228038.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:18.041Z,1513228038.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:18.406Z,1513228038.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:18.447Z,1513228038.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:18.833Z,1513228038.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:18.848Z,1513228038.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:19.226Z,1513228039.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:19.259Z,1513228039.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:19.626Z,1513228039.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:19.686Z,1513228039.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:20.005Z,1513228040.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:20.048Z,1513228040.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:20.406Z,1513228040.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:20.437Z,1513228040.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:20.827Z,1513228040.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:20.847Z,1513228040.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:21.238Z,1513228041.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:21.254Z,1513228041.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:21.638Z,1513228041.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:21.665Z,1513228041.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:22.020Z,1513228042.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:22.064Z,1513228042.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:22.408Z,1513228042.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:22.464Z,1513228042.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:22.817Z,1513228042.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:22.851Z,1513228042.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:23.243Z,1513228043.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:23.259Z,1513228043.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:23.623Z,1513228043.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:23.667Z,1513228043.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:24.015Z,1513228044.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:24.060Z,1513228044.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:24.404Z,1513228044.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:24.418Z,1513228044.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:24.843Z,1513228044.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:24.863Z,1513228044.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:25.229Z,1513228045.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:25.267Z,1513228045.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:25.645Z,1513228045.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:25.679Z,1513228045.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:26.013Z,1513228046.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:26.062Z,1513228046.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:26.411Z,1513228046.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:26.454Z,1513228046.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:26.825Z,1513228046.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:26.853Z,1513228046.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:27.230Z,1513228047.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:27.258Z,1513228047.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:27.625Z,1513228047.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:27.657Z,1513228047.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:28.007Z,1513228048.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:28.049Z,1513228048.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:28.414Z,1513228048.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:28.428Z,1513228048.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:28.883Z,1513228048.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:28.923Z,1513228048.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:29.226Z,1513228049.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:29.248Z,1513228049.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:29.629Z,1513228049.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:29.644Z,1513228049.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:30.022Z,1513228050.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:30.068Z,1513228050.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:30.415Z,1513228050.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:30.431Z,1513228050.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:30.824Z,1513228050.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:30.847Z,1513228050.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:31.231Z,1513228051.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:31.246Z,1513228051.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:31.626Z,1513228051.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:31.691Z,1513228051.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:32.021Z,1513228052.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:32.111Z,1513228052.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:32.407Z,1513228052.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:32.451Z,1513228052.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:32.839Z,1513228052.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:32.853Z,1513228052.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:33.221Z,1513228053.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:33.291Z,1513228053.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:33.621Z,1513228053.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:33.655Z,1513228053.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:34.008Z,1513228054.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:34.059Z,1513228054.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:34.412Z,1513228054.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:34.451Z,1513228054.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:34.817Z,1513228054.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:34.845Z,1513228054.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:35.221Z,1513228055.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:35.307Z,1513228055.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:35.639Z,1513228055.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:35.659Z,1513228055.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:36.016Z,1513228056.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:36.044Z,1513228056.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:36.415Z,1513228056.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:36.445Z,1513228056.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:36.826Z,1513228056.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:36.855Z,1513228056.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:37.226Z,1513228057.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:37.269Z,1513228057.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:37.650Z,1513228057.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:37.664Z,1513228057.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:38.016Z,1513228058.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:38.059Z,1513228058.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:38.438Z,1513228058.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:38.478Z,1513228058.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:38.830Z,1513228058.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:38.858Z,1513228058.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:39.231Z,1513228059.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:39.260Z,1513228059.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:39.626Z,1513228059.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:39.665Z,1513228059.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:40.013Z,1513228060.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:40.056Z,1513228060.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:40.414Z,1513228060.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:40.428Z,1513228060.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:40.838Z,1513228060.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:40.867Z,1513228060.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:41.225Z,1513228061.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:41.263Z,1513228061.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:41.635Z,1513228061.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:41.676Z,1513228061.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:42.016Z,1513228062.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:42.061Z,1513228062.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:42.425Z,1513228062.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:42.482Z,1513228062.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:42.827Z,1513228062.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:42.872Z,1513228062.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:43.226Z,1513228063.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:43.247Z,1513228063.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:43.626Z,1513228063.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:43.673Z,1513228063.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:44.024Z,1513228064.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:44.044Z,1513228064.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:47.499Z,1513228067.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:47.522Z,1513228067.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:47.633Z,1513228067.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:47.679Z,1513228067.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:47.994Z,1513228067.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:48.023Z,1513228068.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:48.389Z,1513228068.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:48.408Z,1513228068.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:48.781Z,1513228068.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:48.796Z,1513228068.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:49.188Z,1513228069.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:49.207Z,1513228069.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:49.582Z,1513228069.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:49.596Z,1513228069.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:49.990Z,1513228069.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:50.012Z,1513228070.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:50.396Z,1513228070.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:50.412Z,1513228070.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:50.790Z,1513228070.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:50.804Z,1513228070.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:51.171Z,1513228071.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:51.203Z,1513228071.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:51.572Z,1513228071.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:51.599Z,1513228071.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:51.971Z,1513228071.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:52.003Z,1513228072.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:52.375Z,1513228072.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:52.401Z,1513228072.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:52.770Z,1513228072.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:52.796Z,1513228072.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:53.186Z,1513228073.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:53.217Z,1513228073.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:53.602Z,1513228073.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:53.617Z,1513228073.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:53.992Z,1513228073.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:54.007Z,1513228074.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:54.370Z,1513228074.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:54.411Z,1513228074.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:54.771Z,1513228074.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:54.865Z,1513228074.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:55.182Z,1513228075.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:55.197Z,1513228075.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:55.577Z,1513228075.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:55.627Z,1513228075.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:55.982Z,1513228075.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:55.996Z,1513228075.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:56.385Z,1513228076.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:56.442Z,1513228076.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:56.796Z,1513228076.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:56.835Z,1513228076.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:57.180Z,1513228077.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:57.195Z,1513228077.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:57.576Z,1513228077.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:57.596Z,1513228077.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:58.075Z,1513228078.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:58.126Z,1513228078.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:58.379Z,1513228078.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:58.428Z,1513228078.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:58.794Z,1513228078.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:58.808Z,1513228078.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:59.186Z,1513228079.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:59.201Z,1513228079.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:59.581Z,1513228079.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:07:59.604Z,1513228079.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:07:59.971Z,1513228079.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:00.002Z,1513228080.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:00.371Z,1513228080.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:00.397Z,1513228080.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:00.769Z,1513228080.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:00.796Z,1513228080.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:01.187Z,1513228081.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:01.224Z,1513228081.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:01.594Z,1513228081.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:01.611Z,1513228081.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:01.994Z,1513228081.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:02.009Z,1513228082.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:02.371Z,1513228082.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:02.395Z,1513228082.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:02.769Z,1513228082.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:02.800Z,1513228082.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:03.171Z,1513228083.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:03.207Z,1513228083.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:03.576Z,1513228083.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:03.602Z,1513228083.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:03.996Z,1513228083.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:04.011Z,1513228084.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:04.403Z,1513228084.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:04.472Z,1513228084.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:04.803Z,1513228084.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:04.818Z,1513228084.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:05.178Z,1513228085.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:05.192Z,1513228085.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:05.577Z,1513228085.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:05.599Z,1513228085.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:05.977Z,1513228085.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:05.992Z,1513228085.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:06.379Z,1513228086.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:06.396Z,1513228086.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:06.778Z,1513228086.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:06.799Z,1513228086.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:07.182Z,1513228087.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:07.197Z,1513228087.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:07.601Z,1513228087.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:07.641Z,1513228087.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:07.986Z,1513228087.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:08.007Z,1513228088.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:08.385Z,1513228088.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:08.400Z,1513228088.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:08.780Z,1513228088.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:08.795Z,1513228088.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:09.182Z,1513228089.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:09.197Z,1513228089.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:09.580Z,1513228089.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:09.595Z,1513228089.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:09.986Z,1513228089.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:10.001Z,1513228090.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:10.386Z,1513228090.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:10.400Z,1513228090.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:10.858Z,1513228090.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:10.897Z,1513228090.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:11.185Z,1513228091.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:11.239Z,1513228091.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:11.582Z,1513228091.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:11.597Z,1513228091.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:11.971Z,1513228091.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:12.007Z,1513228092.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:12.376Z,1513228092.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:12.403Z,1513228092.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:12.772Z,1513228092.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:12.799Z,1513228092.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:13.194Z,1513228093.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:13.208Z,1513228093.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:13.593Z,1513228093.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:13.615Z,1513228093.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:13.991Z,1513228093.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:14.022Z,1513228094.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:14.371Z,1513228094.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:14.404Z,1513228094.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:14.774Z,1513228094.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:14.803Z,1513228094.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:15.194Z,1513228095.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:15.215Z,1513228095.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:15.572Z,1513228095.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:15.589Z,1513228095.589 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:08:15.590Z,1513228095.590 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:08:15.590Z,1513228095.590 [BPC1](ERROR): Data Fault
2017-12-14T05:08:15.616Z,1513228095.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:15.652Z,1513228095.652 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:08:15.982Z,1513228095.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:16.020Z,1513228096.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:16.389Z,1513228096.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:16.416Z,1513228096.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:16.782Z,1513228096.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:16.815Z,1513228096.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:16.829Z,1513228096.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:08:16.829Z,1513228096.829 [BPC1] No Fault, FailCount= 1
2017-12-14T05:08:17.215Z,1513228097.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:17.327Z,1513228097.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:17.574Z,1513228097.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:17.590Z,1513228097.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:17.979Z,1513228097.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:18.016Z,1513228098.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:18.379Z,1513228098.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:18.394Z,1513228098.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:18.779Z,1513228098.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:18.799Z,1513228098.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:19.194Z,1513228099.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:19.216Z,1513228099.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:19.598Z,1513228099.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:19.622Z,1513228099.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:19.989Z,1513228099.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:20.023Z,1513228100.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:20.375Z,1513228100.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:20.467Z,1513228100.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:20.778Z,1513228100.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:20.793Z,1513228100.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:21.176Z,1513228101.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:21.203Z,1513228101.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:21.579Z,1513228101.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:21.594Z,1513228101.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:21.993Z,1513228101.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:22.008Z,1513228102.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:22.381Z,1513228102.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:22.403Z,1513228102.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:22.784Z,1513228102.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:22.798Z,1513228102.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:23.183Z,1513228103.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:23.198Z,1513228103.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:23.593Z,1513228103.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:23.611Z,1513228103.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:23.986Z,1513228103.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:24.001Z,1513228104.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:24.386Z,1513228104.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:24.401Z,1513228104.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:24.796Z,1513228104.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:24.814Z,1513228104.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:25.190Z,1513228105.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:25.204Z,1513228105.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:25.594Z,1513228105.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:25.647Z,1513228105.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:25.994Z,1513228105.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:26.014Z,1513228106.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:26.371Z,1513228106.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:26.397Z,1513228106.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:26.813Z,1513228106.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:26.899Z,1513228106.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:27.181Z,1513228107.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:27.231Z,1513228107.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:27.574Z,1513228107.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:27.599Z,1513228107.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:27.999Z,1513228107.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:28.014Z,1513228108.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:28.392Z,1513228108.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:28.407Z,1513228108.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:28.790Z,1513228108.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:28.804Z,1513228108.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:29.171Z,1513228109.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:29.197Z,1513228109.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:29.571Z,1513228109.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:29.602Z,1513228109.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:29.974Z,1513228109.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:30.000Z,1513228110.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:30.371Z,1513228110.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:30.409Z,1513228110.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:30.771Z,1513228110.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:30.798Z,1513228110.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:31.189Z,1513228111.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:31.211Z,1513228111.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:31.593Z,1513228111.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:31.609Z,1513228111.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:31.993Z,1513228111.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:32.008Z,1513228112.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:32.444Z,1513228112.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:32.481Z,1513228112.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:32.779Z,1513228112.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:32.819Z,1513228112.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:33.177Z,1513228113.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:33.196Z,1513228113.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:33.579Z,1513228113.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:33.594Z,1513228113.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:33.993Z,1513228113.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:34.024Z,1513228114.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:34.394Z,1513228114.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:34.426Z,1513228114.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:34.781Z,1513228114.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:34.803Z,1513228114.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:35.178Z,1513228115.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:35.207Z,1513228115.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:35.583Z,1513228115.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:35.598Z,1513228115.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:35.982Z,1513228115.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:35.997Z,1513228115.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:36.384Z,1513228116.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:36.399Z,1513228116.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:36.779Z,1513228116.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:36.795Z,1513228116.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:37.188Z,1513228117.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:37.208Z,1513228117.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:37.591Z,1513228117.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:37.650Z,1513228117.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:37.982Z,1513228117.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:38.059Z,1513228118.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:38.375Z,1513228118.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:38.389Z,1513228118.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:38.785Z,1513228118.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:38.828Z,1513228118.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:39.217Z,1513228119.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:39.271Z,1513228119.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:39.624Z,1513228119.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:39.670Z,1513228119.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:39.997Z,1513228119.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:40.063Z,1513228120.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:40.385Z,1513228120.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:40.400Z,1513228120.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:40.792Z,1513228120.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:40.825Z,1513228120.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:41.180Z,1513228121.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:41.195Z,1513228121.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:41.581Z,1513228121.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:41.596Z,1513228121.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:41.981Z,1513228121.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:41.995Z,1513228121.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:42.382Z,1513228122.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:42.397Z,1513228122.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:42.794Z,1513228122.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:42.835Z,1513228122.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:42.850Z,1513228122.850 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:03:42.8Z
2017-12-14T05:08:42.850Z,1513228122.850 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T05:08:42.850Z,1513228122.850 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T05:08:43.181Z,1513228123.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:43.208Z,1513228123.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:44.006Z,1513228124.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:44.021Z,1513228124.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:44.130Z,1513228124.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:44.159Z,1513228124.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:47.568Z,1513228127.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:47.584Z,1513228127.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:47.657Z,1513228127.657 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Courier0108.lzma
2017-12-14T05:08:47.679Z,1513228127.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:47.706Z,1513228127.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:48.085Z,1513228128.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:48.128Z,1513228128.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:48.461Z,1513228128.461 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0108.lzma.bak
2017-12-14T05:08:48.461Z,1513228128.461 [DataOverHttps](INFO): SBD MOMSN=5437813
2017-12-14T05:08:48.518Z,1513228128.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:48.539Z,1513228128.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:49.786Z,1513228129.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:49.816Z,1513228129.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:49.905Z,1513228129.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:49.942Z,1513228129.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:53.632Z,1513228133.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:53.667Z,1513228133.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:53.764Z,1513228133.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:53.779Z,1513228133.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:54.136Z,1513228134.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:54.166Z,1513228134.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:54.537Z,1513228134.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:54.568Z,1513228134.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:54.922Z,1513228134.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:54.937Z,1513228134.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:55.318Z,1513228135.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:55.348Z,1513228135.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:58.694Z,1513228138.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:58.773Z,1513228138.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:58.866Z,1513228138.866 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0109.lzma
2017-12-14T05:08:58.897Z,1513228138.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:58.944Z,1513228138.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:59.278Z,1513228139.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:59.298Z,1513228139.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:08:59.636Z,1513228139.636 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0109.lzma.bak
2017-12-14T05:08:59.639Z,1513228139.639 [DataOverHttps](INFO): SBD MOMSN=5437818
2017-12-14T05:08:59.714Z,1513228139.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:08:59.736Z,1513228139.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:00.924Z,1513228140.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:00.999Z,1513228140.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:01.007Z,1513228141.007 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T05:09:01.007Z,1513228141.007 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T05:09:01.008Z,1513228141.008 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T05:09:01.104Z,1513228141.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:01.139Z,1513228141.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:04.462Z,1513228144.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:04.507Z,1513228144.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:04.603Z,1513228144.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:04.700Z,1513228144.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:04.975Z,1513228144.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:05.038Z,1513228145.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:05.391Z,1513228145.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:05.406Z,1513228145.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:05.774Z,1513228145.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:05.804Z,1513228145.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:06.169Z,1513228146.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:06.201Z,1513228146.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:06.563Z,1513228146.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:06.599Z,1513228146.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:06.629Z,1513228146.629 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:09:06.963Z,1513228146.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:06.999Z,1513228146.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:07.364Z,1513228147.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:07.417Z,1513228147.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:07.767Z,1513228147.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:07.803Z,1513228147.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:08.186Z,1513228148.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:08.204Z,1513228148.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:08.578Z,1513228148.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:08.607Z,1513228148.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:09.000Z,1513228149.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:09.063Z,1513228149.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:09.383Z,1513228149.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:09.419Z,1513228149.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:09.778Z,1513228149.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:09.792Z,1513228149.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:10.172Z,1513228150.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:10.189Z,1513228150.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:10.571Z,1513228150.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:10.586Z,1513228150.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:11.001Z,1513228151.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:11.075Z,1513228151.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:11.390Z,1513228151.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:11.411Z,1513228151.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:11.787Z,1513228151.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:11.802Z,1513228151.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:12.167Z,1513228152.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:12.193Z,1513228152.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:12.560Z,1513228152.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:12.595Z,1513228152.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:12.963Z,1513228152.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:12.999Z,1513228152.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:13.371Z,1513228153.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:13.427Z,1513228153.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:13.763Z,1513228153.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:13.804Z,1513228153.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:14.178Z,1513228154.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:14.206Z,1513228154.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:14.597Z,1513228154.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:14.624Z,1513228154.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:14.993Z,1513228154.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:15.030Z,1513228155.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:15.372Z,1513228155.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:15.455Z,1513228155.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:15.775Z,1513228155.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:15.790Z,1513228155.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:16.178Z,1513228156.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:16.192Z,1513228156.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:16.574Z,1513228156.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:16.588Z,1513228156.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:16.984Z,1513228156.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:16.999Z,1513228156.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:17.385Z,1513228157.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:17.407Z,1513228157.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:17.786Z,1513228157.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:17.800Z,1513228157.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:18.162Z,1513228158.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:18.199Z,1513228158.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:18.561Z,1513228158.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:18.592Z,1513228158.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:18.968Z,1513228158.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:19.004Z,1513228159.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:19.363Z,1513228159.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:19.379Z,1513228159.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:19.766Z,1513228159.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:19.781Z,1513228159.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:20.177Z,1513228160.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:20.204Z,1513228160.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:20.581Z,1513228160.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:20.614Z,1513228160.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:21.027Z,1513228161.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:21.066Z,1513228161.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:21.373Z,1513228161.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:21.388Z,1513228161.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:21.768Z,1513228161.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:21.788Z,1513228161.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:22.173Z,1513228162.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:22.187Z,1513228162.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:22.627Z,1513228162.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:22.642Z,1513228162.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:23.015Z,1513228163.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:23.064Z,1513228163.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:23.377Z,1513228163.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:23.415Z,1513228163.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:23.775Z,1513228163.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:23.803Z,1513228163.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:24.193Z,1513228164.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:24.231Z,1513228164.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:24.579Z,1513228164.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:24.594Z,1513228164.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:24.975Z,1513228164.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:25.055Z,1513228165.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:25.363Z,1513228165.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:25.458Z,1513228165.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:25.763Z,1513228165.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:25.795Z,1513228165.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:26.182Z,1513228166.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:26.239Z,1513228166.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:26.587Z,1513228166.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:26.601Z,1513228166.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:26.972Z,1513228166.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:27.024Z,1513228167.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:27.372Z,1513228167.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:27.387Z,1513228167.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:27.771Z,1513228167.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:27.791Z,1513228167.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:28.172Z,1513228168.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:28.299Z,1513228168.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:28.573Z,1513228168.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:28.587Z,1513228168.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:28.980Z,1513228168.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:28.995Z,1513228168.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:29.380Z,1513228169.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:29.395Z,1513228169.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:29.780Z,1513228169.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:29.799Z,1513228169.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:30.163Z,1513228170.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:30.282Z,1513228170.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:30.602Z,1513228170.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:30.629Z,1513228170.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:30.963Z,1513228170.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:30.994Z,1513228170.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:31.363Z,1513228171.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:31.399Z,1513228171.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:31.771Z,1513228171.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:31.806Z,1513228171.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:32.177Z,1513228172.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:32.204Z,1513228172.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:32.598Z,1513228172.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:32.612Z,1513228172.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:32.974Z,1513228172.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:32.995Z,1513228172.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:33.386Z,1513228173.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:33.435Z,1513228173.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:33.766Z,1513228173.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:33.795Z,1513228173.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:34.163Z,1513228174.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:34.196Z,1513228174.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:34.562Z,1513228174.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:34.595Z,1513228174.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:34.989Z,1513228174.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:35.004Z,1513228175.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:35.391Z,1513228175.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:35.437Z,1513228175.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:35.437Z,1513228175.437 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2017-12-14T05:09:35.437Z,1513228175.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:09:35.439Z,1513228175.439 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:35.439Z,1513228175.439 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2017-12-14T05:09:35.439Z,1513228175.439 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:09:35.441Z,1513228175.441 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:35.441Z,1513228175.441 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2017-12-14T05:09:35.441Z,1513228175.441 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:09:35.453Z,1513228175.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:09:35.453Z,1513228175.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:09:35.454Z,1513228175.454 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:09:35.778Z,1513228175.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:35.811Z,1513228175.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:09:35.811Z,1513228175.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2017-12-14T05:09:35.812Z,1513228175.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:09:35.812Z,1513228175.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2017-12-14T05:09:35.812Z,1513228175.812 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:09:35.812Z,1513228175.812 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2017-12-14T05:09:36.163Z,1513228176.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:36.192Z,1513228176.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:09:36.193Z,1513228176.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:09:36.193Z,1513228176.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:09:36.194Z,1513228176.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:09:36.194Z,1513228176.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:09:36.194Z,1513228176.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:09:36.195Z,1513228176.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:09:36.195Z,1513228176.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:09:36.195Z,1513228176.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:09:36.562Z,1513228176.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:36.598Z,1513228176.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:37.024Z,1513228177.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:37.083Z,1513228177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:37.370Z,1513228177.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:37.391Z,1513228177.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:37.771Z,1513228177.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:37.786Z,1513228177.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:38.185Z,1513228178.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:38.200Z,1513228178.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:38.589Z,1513228178.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:38.604Z,1513228178.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:39.024Z,1513228179.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:39.083Z,1513228179.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:39.381Z,1513228179.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:39.395Z,1513228179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:39.779Z,1513228179.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:39.799Z,1513228179.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:40.171Z,1513228180.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:40.186Z,1513228180.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:40.582Z,1513228180.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:40.603Z,1513228180.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:40.988Z,1513228180.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:41.003Z,1513228181.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:41.387Z,1513228181.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:41.401Z,1513228181.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:41.784Z,1513228181.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:41.799Z,1513228181.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:42.163Z,1513228182.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:42.199Z,1513228182.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:42.567Z,1513228182.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:42.601Z,1513228182.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:42.963Z,1513228182.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:42.983Z,1513228182.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:43.409Z,1513228183.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:43.462Z,1513228183.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:43.770Z,1513228183.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:43.784Z,1513228183.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:44.183Z,1513228184.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:44.211Z,1513228184.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:44.582Z,1513228184.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:44.603Z,1513228184.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:44.978Z,1513228184.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:44.000Z,1513228185.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:45.373Z,1513228185.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:45.388Z,1513228185.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:45.771Z,1513228185.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:45.798Z,1513228185.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:46.178Z,1513228186.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:46.193Z,1513228186.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:46.584Z,1513228186.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:46.615Z,1513228186.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:46.987Z,1513228186.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:47.010Z,1513228187.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:47.382Z,1513228187.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:47.462Z,1513228187.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:47.774Z,1513228187.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:47.795Z,1513228187.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:48.174Z,1513228188.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:48.189Z,1513228188.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:48.574Z,1513228188.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:48.619Z,1513228188.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:48.971Z,1513228188.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:48.991Z,1513228188.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:49.375Z,1513228189.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:49.427Z,1513228189.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:49.772Z,1513228189.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:49.787Z,1513228189.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:50.180Z,1513228190.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:50.213Z,1513228190.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:50.581Z,1513228190.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:50.596Z,1513228190.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:51.000Z,1513228191.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:51.080Z,1513228191.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:51.374Z,1513228191.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:51.396Z,1513228191.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:51.763Z,1513228191.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:51.794Z,1513228191.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:52.163Z,1513228192.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:52.188Z,1513228192.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:52.560Z,1513228192.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:52.595Z,1513228192.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:53.063Z,1513228193.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:53.118Z,1513228193.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:53.377Z,1513228193.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:53.402Z,1513228193.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:53.774Z,1513228193.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:53.805Z,1513228193.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:54.166Z,1513228194.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:54.180Z,1513228194.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:54.566Z,1513228194.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:54.580Z,1513228194.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:54.963Z,1513228194.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:54.990Z,1513228194.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:55.382Z,1513228195.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:55.396Z,1513228195.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:55.764Z,1513228195.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:55.795Z,1513228195.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:56.185Z,1513228196.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:56.199Z,1513228196.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:56.586Z,1513228196.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:56.607Z,1513228196.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:56.997Z,1513228196.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:57.013Z,1513228197.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:57.371Z,1513228197.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:57.407Z,1513228197.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:57.770Z,1513228197.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:57.819Z,1513228197.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:58.172Z,1513228198.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:58.188Z,1513228198.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:58.568Z,1513228198.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:58.596Z,1513228198.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:58.973Z,1513228198.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:59.007Z,1513228199.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:59.389Z,1513228199.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:59.412Z,1513228199.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:09:59.774Z,1513228199.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:09:59.847Z,1513228199.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:00.167Z,1513228200.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:00.203Z,1513228200.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:00.560Z,1513228200.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:00.576Z,1513228200.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:00.972Z,1513228200.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:01.002Z,1513228201.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:01.376Z,1513228201.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:01.411Z,1513228201.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:04.760Z,1513228204.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:04.776Z,1513228204.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:04.904Z,1513228204.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:04.927Z,1513228204.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:05.267Z,1513228205.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:05.295Z,1513228205.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:05.668Z,1513228205.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:05.683Z,1513228205.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:06.061Z,1513228206.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:06.076Z,1513228206.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:06.446Z,1513228206.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:06.482Z,1513228206.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:06.865Z,1513228206.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:06.880Z,1513228206.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:07.270Z,1513228207.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:07.285Z,1513228207.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:07.660Z,1513228207.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:07.683Z,1513228207.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:08.054Z,1513228208.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:08.070Z,1513228208.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:08.439Z,1513228208.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:08.484Z,1513228208.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:08.862Z,1513228208.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:08.869Z,1513228208.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x34451 got:0x16896
2017-12-14T05:10:08.895Z,1513228208.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:09.294Z,1513228209.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:09.322Z,1513228209.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:09.662Z,1513228209.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:09.731Z,1513228209.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:10.043Z,1513228210.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:10.100Z,1513228210.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:10.445Z,1513228210.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:10.454Z,1513228210.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x42105 got:0x6591
2017-12-14T05:10:10.490Z,1513228210.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:10.866Z,1513228210.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:10.911Z,1513228210.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:11.268Z,1513228211.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:11.282Z,1513228211.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:11.667Z,1513228211.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:11.728Z,1513228211.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:12.051Z,1513228212.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:12.081Z,1513228212.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:12.444Z,1513228212.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:12.510Z,1513228212.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:12.873Z,1513228212.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:12.888Z,1513228212.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:13.270Z,1513228213.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:13.292Z,1513228213.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:13.663Z,1513228213.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:13.695Z,1513228213.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:14.053Z,1513228214.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:14.090Z,1513228214.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:14.450Z,1513228214.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:14.465Z,1513228214.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:14.868Z,1513228214.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:14.889Z,1513228214.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:15.261Z,1513228215.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:15.293Z,1513228215.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:15.700Z,1513228215.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:15.724Z,1513228215.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:16.050Z,1513228216.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:16.065Z,1513228216.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:16.447Z,1513228216.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:16.474Z,1513228216.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:16.853Z,1513228216.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:16.868Z,1513228216.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:17.248Z,1513228217.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:17.272Z,1513228217.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:17.651Z,1513228217.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:17.666Z,1513228217.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:18.058Z,1513228218.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:18.074Z,1513228218.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:18.460Z,1513228218.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:18.475Z,1513228218.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:18.929Z,1513228218.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:19.109Z,1513228219.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:19.254Z,1513228219.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:19.269Z,1513228219.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:19.657Z,1513228219.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:19.673Z,1513228219.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:20.054Z,1513228220.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:20.110Z,1513228220.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:20.452Z,1513228220.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:20.468Z,1513228220.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:20.856Z,1513228220.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:20.871Z,1513228220.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:21.272Z,1513228221.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:21.303Z,1513228221.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:21.668Z,1513228221.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:21.683Z,1513228221.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:22.054Z,1513228222.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:22.068Z,1513228222.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:22.453Z,1513228222.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:22.468Z,1513228222.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:22.859Z,1513228222.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:22.875Z,1513228222.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:23.263Z,1513228223.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:23.292Z,1513228223.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:23.664Z,1513228223.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:23.679Z,1513228223.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:24.054Z,1513228224.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:24.070Z,1513228224.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:24.439Z,1513228224.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:24.483Z,1513228224.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:24.865Z,1513228224.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:24.881Z,1513228224.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:25.264Z,1513228225.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:25.323Z,1513228225.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:25.666Z,1513228225.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:25.683Z,1513228225.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:26.038Z,1513228226.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:26.072Z,1513228226.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:26.443Z,1513228226.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:26.473Z,1513228226.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:26.862Z,1513228226.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:26.883Z,1513228226.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:27.265Z,1513228227.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:27.281Z,1513228227.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:27.669Z,1513228227.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:27.683Z,1513228227.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:28.048Z,1513228228.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:28.074Z,1513228228.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:28.475Z,1513228228.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:28.511Z,1513228228.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:28.863Z,1513228228.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:28.878Z,1513228228.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:29.259Z,1513228229.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:29.286Z,1513228229.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:29.652Z,1513228229.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:29.687Z,1513228229.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:30.052Z,1513228230.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:30.138Z,1513228230.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:30.446Z,1513228230.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:30.477Z,1513228230.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:30.852Z,1513228230.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:30.877Z,1513228230.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:31.273Z,1513228231.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:31.288Z,1513228231.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:31.689Z,1513228231.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:31.729Z,1513228231.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:32.053Z,1513228232.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:32.151Z,1513228232.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:32.446Z,1513228232.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:32.484Z,1513228232.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:32.861Z,1513228232.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:32.912Z,1513228232.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:33.264Z,1513228233.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:33.283Z,1513228233.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:33.666Z,1513228233.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:33.718Z,1513228233.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:34.039Z,1513228234.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:34.072Z,1513228234.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:34.436Z,1513228234.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:34.479Z,1513228234.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:34.875Z,1513228234.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:34.900Z,1513228234.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:35.257Z,1513228235.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:35.272Z,1513228235.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:35.652Z,1513228235.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:35.671Z,1513228235.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:36.052Z,1513228236.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:36.067Z,1513228236.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:36.447Z,1513228236.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:36.479Z,1513228236.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:36.861Z,1513228236.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:36.876Z,1513228236.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:37.265Z,1513228237.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:37.292Z,1513228237.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:37.668Z,1513228237.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:37.687Z,1513228237.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:38.054Z,1513228238.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:38.068Z,1513228238.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:38.452Z,1513228238.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:38.467Z,1513228238.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:38.861Z,1513228238.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:38.876Z,1513228238.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:39.257Z,1513228239.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:39.291Z,1513228239.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:39.663Z,1513228239.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:39.677Z,1513228239.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:40.046Z,1513228240.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:40.072Z,1513228240.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:40.436Z,1513228240.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:40.478Z,1513228240.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:40.862Z,1513228240.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:40.877Z,1513228240.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:41.272Z,1513228241.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:41.300Z,1513228241.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:41.664Z,1513228241.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:41.687Z,1513228241.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:42.044Z,1513228242.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:42.103Z,1513228242.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:42.452Z,1513228242.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:42.484Z,1513228242.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:42.854Z,1513228242.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:42.886Z,1513228242.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:43.252Z,1513228243.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:43.275Z,1513228243.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:43.643Z,1513228243.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:43.690Z,1513228243.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:44.062Z,1513228244.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:44.077Z,1513228244.077 [PNI_TCM](ERROR): CRC does not match. Expected:0x55709 got:0x15761
2017-12-14T05:10:44.103Z,1513228244.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:44.465Z,1513228244.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:44.503Z,1513228244.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:44.862Z,1513228244.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:44.892Z,1513228244.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:45.246Z,1513228245.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:45.269Z,1513228245.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:45.649Z,1513228245.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:45.667Z,1513228245.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:46.054Z,1513228246.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:46.069Z,1513228246.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:46.451Z,1513228246.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:46.466Z,1513228246.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:46.865Z,1513228246.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:46.896Z,1513228246.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:47.258Z,1513228247.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:47.295Z,1513228247.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:47.691Z,1513228247.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:47.719Z,1513228247.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:48.050Z,1513228248.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:48.066Z,1513228248.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:48.453Z,1513228248.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:48.472Z,1513228248.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:48.859Z,1513228248.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:48.874Z,1513228248.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:49.263Z,1513228249.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:49.279Z,1513228249.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:49.654Z,1513228249.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:49.670Z,1513228249.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:50.061Z,1513228250.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:50.077Z,1513228250.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:50.464Z,1513228250.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:50.487Z,1513228250.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:50.871Z,1513228250.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:50.903Z,1513228250.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:51.258Z,1513228251.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:51.273Z,1513228251.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:51.653Z,1513228251.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:51.672Z,1513228251.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:52.050Z,1513228252.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:52.081Z,1513228252.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:52.456Z,1513228252.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:52.472Z,1513228252.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:52.861Z,1513228252.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:52.877Z,1513228252.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:53.271Z,1513228253.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:53.307Z,1513228253.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:53.666Z,1513228253.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:53.681Z,1513228253.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:54.072Z,1513228254.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:54.183Z,1513228254.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:54.442Z,1513228254.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:54.466Z,1513228254.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:54.852Z,1513228254.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:54.892Z,1513228254.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:55.267Z,1513228255.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:55.330Z,1513228255.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:55.654Z,1513228255.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:55.681Z,1513228255.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:56.045Z,1513228256.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:56.095Z,1513228256.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:56.442Z,1513228256.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:56.479Z,1513228256.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:56.852Z,1513228256.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:56.870Z,1513228256.870 [PNI_TCM](ERROR): CRC does not match. Expected:0x61785 got:0x49059
2017-12-14T05:10:56.895Z,1513228256.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:57.266Z,1513228257.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:57.281Z,1513228257.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:57.654Z,1513228257.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:57.675Z,1513228257.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:58.047Z,1513228258.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:58.077Z,1513228258.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:58.453Z,1513228258.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:58.473Z,1513228258.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:58.854Z,1513228258.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:58.874Z,1513228258.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:59.265Z,1513228259.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:59.280Z,1513228259.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:10:59.665Z,1513228259.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:10:59.680Z,1513228259.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:00.050Z,1513228260.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:00.071Z,1513228260.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:00.468Z,1513228260.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:00.532Z,1513228260.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:00.855Z,1513228260.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:00.882Z,1513228260.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:01.272Z,1513228261.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:01.286Z,1513228261.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:01.660Z,1513228261.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:01.691Z,1513228261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:05.129Z,1513228265.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:05.184Z,1513228265.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:05.294Z,1513228265.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:05.309Z,1513228265.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:05.652Z,1513228265.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:05.667Z,1513228265.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:06.063Z,1513228266.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:06.086Z,1513228266.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:06.462Z,1513228266.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:06.485Z,1513228266.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:06.866Z,1513228266.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:06.915Z,1513228266.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:07.250Z,1513228267.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:07.265Z,1513228267.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:07.645Z,1513228267.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:07.667Z,1513228267.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:08.051Z,1513228268.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:08.065Z,1513228268.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:08.451Z,1513228268.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:08.466Z,1513228268.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:08.846Z,1513228268.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:08.869Z,1513228268.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:09.235Z,1513228269.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:09.271Z,1513228269.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:09.648Z,1513228269.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:09.663Z,1513228269.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:10.065Z,1513228270.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:10.096Z,1513228270.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:10.445Z,1513228270.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:10.467Z,1513228270.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:10.851Z,1513228270.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:10.872Z,1513228270.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:11.252Z,1513228271.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:11.272Z,1513228271.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:11.655Z,1513228271.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:11.670Z,1513228271.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:12.050Z,1513228272.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:12.065Z,1513228272.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:12.444Z,1513228272.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:12.467Z,1513228272.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:12.853Z,1513228272.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:12.875Z,1513228272.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:13.268Z,1513228273.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:13.300Z,1513228273.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:13.650Z,1513228273.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:13.672Z,1513228273.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:14.044Z,1513228274.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:14.075Z,1513228274.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:14.448Z,1513228274.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:14.455Z,1513228274.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x59456 got:0x1858
2017-12-14T05:11:14.492Z,1513228274.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:14.857Z,1513228274.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:14.872Z,1513228274.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:15.253Z,1513228275.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:15.268Z,1513228275.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:15.659Z,1513228275.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:15.673Z,1513228275.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:16.038Z,1513228276.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:16.066Z,1513228276.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:16.468Z,1513228276.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:16.523Z,1513228276.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:16.843Z,1513228276.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:16.868Z,1513228276.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:17.276Z,1513228277.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:17.354Z,1513228277.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:17.661Z,1513228277.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:17.676Z,1513228277.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:18.033Z,1513228278.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:18.072Z,1513228278.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:18.443Z,1513228278.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:18.527Z,1513228278.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:18.890Z,1513228278.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:18.933Z,1513228278.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:19.261Z,1513228279.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:19.328Z,1513228279.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:19.679Z,1513228279.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:19.763Z,1513228279.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:20.050Z,1513228280.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:20.087Z,1513228280.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:20.445Z,1513228280.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:20.496Z,1513228280.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:20.858Z,1513228280.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:20.890Z,1513228280.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:21.252Z,1513228281.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:21.286Z,1513228281.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:21.652Z,1513228281.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:21.691Z,1513228281.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:22.044Z,1513228282.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:22.092Z,1513228282.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:22.448Z,1513228282.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:22.500Z,1513228282.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:22.846Z,1513228282.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:22.879Z,1513228282.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:23.255Z,1513228283.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:23.303Z,1513228283.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:23.658Z,1513228283.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:23.696Z,1513228283.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:24.034Z,1513228284.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:24.080Z,1513228284.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:24.437Z,1513228284.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:24.482Z,1513228284.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:24.889Z,1513228284.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:24.979Z,1513228284.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:25.246Z,1513228285.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:25.293Z,1513228285.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:25.658Z,1513228285.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:25.700Z,1513228285.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:26.052Z,1513228286.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:26.067Z,1513228286.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:26.450Z,1513228286.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:26.473Z,1513228286.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:26.868Z,1513228286.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:26.899Z,1513228286.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:27.259Z,1513228287.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:27.278Z,1513228287.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:27.677Z,1513228287.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:27.727Z,1513228287.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:28.038Z,1513228288.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:28.130Z,1513228288.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:28.456Z,1513228288.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:28.488Z,1513228288.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:28.847Z,1513228288.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:28.871Z,1513228288.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:29.266Z,1513228289.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:29.292Z,1513228289.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:29.673Z,1513228289.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:29.720Z,1513228289.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:30.056Z,1513228290.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:30.088Z,1513228290.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:30.447Z,1513228290.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:30.524Z,1513228290.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:30.852Z,1513228290.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:30.887Z,1513228290.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:31.249Z,1513228291.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:31.287Z,1513228291.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:31.639Z,1513228291.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:31.691Z,1513228291.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:32.048Z,1513228292.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:32.093Z,1513228292.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:32.458Z,1513228292.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:32.495Z,1513228292.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:32.885Z,1513228292.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:32.933Z,1513228292.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:33.243Z,1513228293.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:33.332Z,1513228293.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:33.676Z,1513228293.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:33.712Z,1513228293.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:34.038Z,1513228294.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:34.072Z,1513228294.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:34.436Z,1513228294.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:34.483Z,1513228294.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:34.859Z,1513228294.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:34.879Z,1513228294.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:35.271Z,1513228295.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:35.316Z,1513228295.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:35.658Z,1513228295.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:35.687Z,1513228295.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:36.039Z,1513228296.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:36.086Z,1513228296.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:36.478Z,1513228296.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:36.576Z,1513228296.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:36.866Z,1513228296.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:36.887Z,1513228296.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:37.271Z,1513228297.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:37.290Z,1513228297.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:37.646Z,1513228297.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:37.681Z,1513228297.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:38.037Z,1513228298.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:38.088Z,1513228298.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:38.452Z,1513228298.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:38.481Z,1513228298.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:38.850Z,1513228298.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:38.895Z,1513228298.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:39.250Z,1513228299.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:39.290Z,1513228299.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:39.655Z,1513228299.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:39.803Z,1513228299.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:40.046Z,1513228300.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:40.103Z,1513228300.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:40.448Z,1513228300.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:40.494Z,1513228300.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:40.850Z,1513228300.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:40.903Z,1513228300.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:41.249Z,1513228301.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:41.271Z,1513228301.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:41.654Z,1513228301.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:41.695Z,1513228301.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:42.052Z,1513228302.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:42.066Z,1513228302.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:42.446Z,1513228302.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:42.460Z,1513228302.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:42.851Z,1513228302.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:42.870Z,1513228302.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:43.258Z,1513228303.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:43.300Z,1513228303.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:43.650Z,1513228303.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:43.686Z,1513228303.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:44.044Z,1513228304.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:44.063Z,1513228304.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:44.233Z,1513228304.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:44.439Z,1513228304.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:44.471Z,1513228304.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:44.856Z,1513228304.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:44.883Z,1513228304.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:45.031Z,1513228305.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:45.256Z,1513228305.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:45.275Z,1513228305.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:45.449Z,1513228305.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:45.652Z,1513228305.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:45.667Z,1513228305.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:46.043Z,1513228306.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:46.096Z,1513228306.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:46.466Z,1513228306.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:46.473Z,1513228306.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x41992 got:0x32
2017-12-14T05:11:46.519Z,1513228306.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:46.856Z,1513228306.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:46.871Z,1513228306.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:47.254Z,1513228307.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:47.268Z,1513228307.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:47.655Z,1513228307.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:47.672Z,1513228307.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:48.029Z,1513228308.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:48.068Z,1513228308.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:48.448Z,1513228308.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:48.467Z,1513228308.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:48.865Z,1513228308.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:48.879Z,1513228308.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:49.256Z,1513228309.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:49.280Z,1513228309.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:49.669Z,1513228309.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:49.697Z,1513228309.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:50.045Z,1513228310.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:50.088Z,1513228310.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:50.442Z,1513228310.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:50.457Z,1513228310.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:50.881Z,1513228310.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:50.898Z,1513228310.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:51.255Z,1513228311.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:51.281Z,1513228311.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:51.651Z,1513228311.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:51.685Z,1513228311.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:52.035Z,1513228312.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:52.070Z,1513228312.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:52.430Z,1513228312.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:52.475Z,1513228312.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:52.906Z,1513228312.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:52.930Z,1513228312.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:53.250Z,1513228313.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:53.277Z,1513228313.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:53.641Z,1513228313.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:53.671Z,1513228313.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:54.040Z,1513228314.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:54.083Z,1513228314.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:54.441Z,1513228314.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:54.477Z,1513228314.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:54.845Z,1513228314.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:54.879Z,1513228314.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:55.253Z,1513228315.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:55.279Z,1513228315.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:55.642Z,1513228315.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:55.671Z,1513228315.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:56.071Z,1513228316.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:56.078Z,1513228316.078 [PNI_TCM](ERROR): CRC does not match. Expected:0x16283 got:0x51480
2017-12-14T05:11:56.134Z,1513228316.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:56.441Z,1513228316.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:56.456Z,1513228316.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:56.850Z,1513228316.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:56.876Z,1513228316.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:57.289Z,1513228317.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:57.311Z,1513228317.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:57.654Z,1513228317.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:57.684Z,1513228317.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:58.040Z,1513228318.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:58.060Z,1513228318.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:58.442Z,1513228318.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:58.472Z,1513228318.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:58.851Z,1513228318.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:58.871Z,1513228318.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:59.254Z,1513228319.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:59.287Z,1513228319.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:11:59.660Z,1513228319.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:11:59.675Z,1513228319.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:00.047Z,1513228320.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:00.062Z,1513228320.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:00.431Z,1513228320.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:00.471Z,1513228320.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:00.855Z,1513228320.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:00.871Z,1513228320.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:01.250Z,1513228321.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:01.268Z,1513228321.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:01.651Z,1513228321.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:01.666Z,1513228321.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:02.055Z,1513228322.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:02.128Z,1513228322.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:05.708Z,1513228325.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:05.743Z,1513228325.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:05.864Z,1513228325.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:05.905Z,1513228325.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:06.257Z,1513228326.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:06.284Z,1513228326.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:06.691Z,1513228326.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:06.752Z,1513228326.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:07.046Z,1513228327.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:07.073Z,1513228327.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:07.445Z,1513228327.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:07.494Z,1513228327.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:07.844Z,1513228327.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:07.860Z,1513228327.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:08.246Z,1513228328.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:08.260Z,1513228328.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:08.645Z,1513228328.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:08.667Z,1513228328.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:09.049Z,1513228329.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:09.064Z,1513228329.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:09.432Z,1513228329.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:09.467Z,1513228329.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:09.852Z,1513228329.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:09.866Z,1513228329.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:10.251Z,1513228330.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:10.270Z,1513228330.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:10.671Z,1513228330.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:10.700Z,1513228330.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:11.079Z,1513228331.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:11.116Z,1513228331.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:11.431Z,1513228331.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:11.470Z,1513228331.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:11.834Z,1513228331.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:11.860Z,1513228331.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:12.232Z,1513228332.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:12.265Z,1513228332.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:12.631Z,1513228332.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:12.662Z,1513228332.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:13.100Z,1513228333.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:13.115Z,1513228333.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:13.455Z,1513228333.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:13.470Z,1513228333.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:13.840Z,1513228333.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:13.872Z,1513228333.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:14.231Z,1513228334.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:14.268Z,1513228334.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:14.633Z,1513228334.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:14.742Z,1513228334.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:15.043Z,1513228335.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:15.059Z,1513228335.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:15.431Z,1513228335.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:15.457Z,1513228335.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:15.850Z,1513228335.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:15.903Z,1513228335.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:16.258Z,1513228336.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:16.273Z,1513228336.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:16.702Z,1513228336.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:16.732Z,1513228336.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:17.036Z,1513228337.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:17.059Z,1513228337.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:17.439Z,1513228337.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:17.455Z,1513228337.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:17.853Z,1513228337.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:17.884Z,1513228337.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:18.257Z,1513228338.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:18.293Z,1513228338.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:18.654Z,1513228338.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:18.771Z,1513228338.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:19.031Z,1513228339.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:19.062Z,1513228339.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:19.435Z,1513228339.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:19.479Z,1513228339.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:19.841Z,1513228339.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:19.872Z,1513228339.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:20.253Z,1513228340.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:20.283Z,1513228340.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:20.690Z,1513228340.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:20.727Z,1513228340.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:21.043Z,1513228341.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:21.057Z,1513228341.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:21.473Z,1513228341.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:21.506Z,1513228341.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:21.844Z,1513228341.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:21.859Z,1513228341.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:22.249Z,1513228342.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:22.264Z,1513228342.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:22.645Z,1513228342.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:22.686Z,1513228342.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:23.047Z,1513228343.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:23.070Z,1513228343.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:23.432Z,1513228343.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:23.463Z,1513228343.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:23.851Z,1513228343.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:23.871Z,1513228343.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:24.258Z,1513228344.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:24.279Z,1513228344.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:24.675Z,1513228344.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:24.699Z,1513228344.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:25.082Z,1513228345.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:25.125Z,1513228345.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:25.439Z,1513228345.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:25.454Z,1513228345.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:25.854Z,1513228345.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:25.878Z,1513228345.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:26.250Z,1513228346.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:26.277Z,1513228346.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:26.650Z,1513228346.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:26.684Z,1513228346.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:27.077Z,1513228347.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:27.120Z,1513228347.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:27.438Z,1513228347.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:27.462Z,1513228347.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:27.867Z,1513228347.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:27.948Z,1513228347.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:28.245Z,1513228348.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:28.294Z,1513228348.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:28.674Z,1513228348.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:28.736Z,1513228348.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:29.036Z,1513228349.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:29.094Z,1513228349.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:29.440Z,1513228349.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:29.479Z,1513228349.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:29.851Z,1513228349.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:29.924Z,1513228349.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:30.250Z,1513228350.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:30.283Z,1513228350.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:30.680Z,1513228350.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:30.739Z,1513228350.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:31.039Z,1513228351.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:31.055Z,1513228351.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:31.444Z,1513228351.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:31.459Z,1513228351.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:31.852Z,1513228351.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:31.868Z,1513228351.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:32.251Z,1513228352.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:32.282Z,1513228352.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:32.652Z,1513228352.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:32.745Z,1513228352.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:33.042Z,1513228353.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:33.056Z,1513228353.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:33.446Z,1513228353.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:33.460Z,1513228353.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:33.842Z,1513228353.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:33.857Z,1513228353.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:34.293Z,1513228354.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:34.316Z,1513228354.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:34.654Z,1513228354.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:34.715Z,1513228354.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:35.039Z,1513228355.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:35.059Z,1513228355.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:35.437Z,1513228355.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:35.471Z,1513228355.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:35.855Z,1513228355.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:35.871Z,1513228355.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:36.254Z,1513228356.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:36.268Z,1513228356.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:36.268Z,1513228356.268 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2017-12-14T05:12:36.268Z,1513228356.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:12:36.271Z,1513228356.271 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:36.271Z,1513228356.271 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2017-12-14T05:12:36.271Z,1513228356.271 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:12:36.273Z,1513228356.273 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:36.273Z,1513228356.273 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2017-12-14T05:12:36.273Z,1513228356.273 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:12:36.317Z,1513228356.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:12:36.317Z,1513228356.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:12:36.318Z,1513228356.318 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:12:36.646Z,1513228356.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:36.726Z,1513228356.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:12:36.726Z,1513228356.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2017-12-14T05:12:36.728Z,1513228356.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:12:36.728Z,1513228356.728 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2017-12-14T05:12:36.738Z,1513228356.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:12:36.739Z,1513228356.739 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2017-12-14T05:12:37.034Z,1513228357.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:37.051Z,1513228357.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:12:37.052Z,1513228357.052 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:12:37.052Z,1513228357.052 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:12:37.058Z,1513228357.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:12:37.058Z,1513228357.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:12:37.058Z,1513228357.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:12:37.059Z,1513228357.059 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:12:37.059Z,1513228357.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:12:37.059Z,1513228357.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:12:37.465Z,1513228357.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:37.520Z,1513228357.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:37.849Z,1513228357.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:37.901Z,1513228357.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:38.245Z,1513228358.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:38.303Z,1513228358.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:38.649Z,1513228358.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:38.679Z,1513228358.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:39.084Z,1513228359.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:39.129Z,1513228359.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:39.439Z,1513228359.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:39.459Z,1513228359.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:39.853Z,1513228359.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:39.882Z,1513228359.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:40.245Z,1513228360.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:40.260Z,1513228360.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:40.704Z,1513228360.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:40.736Z,1513228360.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:41.083Z,1513228361.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:41.115Z,1513228361.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:41.439Z,1513228361.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:41.464Z,1513228361.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:41.842Z,1513228361.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:41.860Z,1513228361.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:42.239Z,1513228362.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:42.253Z,1513228362.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:42.664Z,1513228362.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:42.743Z,1513228362.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:43.044Z,1513228363.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:43.071Z,1513228363.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:43.453Z,1513228363.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:43.468Z,1513228363.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:43.855Z,1513228363.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:43.895Z,1513228363.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:44.230Z,1513228364.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:44.256Z,1513228364.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:44.644Z,1513228364.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:44.725Z,1513228364.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:45.035Z,1513228365.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:45.066Z,1513228365.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:45.439Z,1513228365.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:45.474Z,1513228365.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:45.850Z,1513228365.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:45.879Z,1513228365.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:46.245Z,1513228366.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:46.276Z,1513228366.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:46.676Z,1513228366.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:46.732Z,1513228366.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:47.056Z,1513228367.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:47.100Z,1513228367.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:47.447Z,1513228367.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:47.463Z,1513228367.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:47.850Z,1513228367.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:47.865Z,1513228367.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:48.252Z,1513228368.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:48.268Z,1513228368.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:48.684Z,1513228368.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:48.733Z,1513228368.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:49.039Z,1513228369.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:49.069Z,1513228369.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:49.436Z,1513228369.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:49.459Z,1513228369.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:49.854Z,1513228369.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:49.926Z,1513228369.926 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:12:49.926Z,1513228369.926 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:12:49.926Z,1513228369.926 [BPC1](ERROR): Data Fault
2017-12-14T05:12:49.996Z,1513228369.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:50.028Z,1513228370.028 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:12:50.270Z,1513228370.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:50.301Z,1513228370.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:50.642Z,1513228370.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:50.679Z,1513228370.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:51.036Z,1513228371.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:51.060Z,1513228371.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:51.102Z,1513228371.102 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:12:51.102Z,1513228371.102 [BPC1] No Fault, FailCount= 1
2017-12-14T05:12:51.438Z,1513228371.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:51.520Z,1513228371.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:51.845Z,1513228371.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:51.860Z,1513228371.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:52.254Z,1513228372.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:52.284Z,1513228372.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:52.641Z,1513228372.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:52.655Z,1513228372.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:53.075Z,1513228373.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:53.106Z,1513228373.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:53.438Z,1513228373.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:53.478Z,1513228373.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:53.848Z,1513228373.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:53.863Z,1513228373.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:54.255Z,1513228374.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:54.269Z,1513228374.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:54.656Z,1513228374.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:54.679Z,1513228374.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:55.068Z,1513228375.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:55.112Z,1513228375.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:55.430Z,1513228375.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:55.472Z,1513228375.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:55.854Z,1513228375.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:55.875Z,1513228375.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:56.258Z,1513228376.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:56.272Z,1513228376.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:56.699Z,1513228376.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:56.778Z,1513228376.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:57.044Z,1513228377.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:57.059Z,1513228377.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:57.441Z,1513228377.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:57.456Z,1513228377.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:57.854Z,1513228377.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:57.883Z,1513228377.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:58.246Z,1513228378.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:58.260Z,1513228378.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:58.700Z,1513228378.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:58.753Z,1513228378.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:59.042Z,1513228379.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:59.057Z,1513228379.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:59.446Z,1513228379.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:59.460Z,1513228379.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:12:59.848Z,1513228379.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:12:59.956Z,1513228379.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:00.253Z,1513228380.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:00.275Z,1513228380.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:00.694Z,1513228380.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:00.731Z,1513228380.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:01.044Z,1513228381.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:01.059Z,1513228381.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:01.436Z,1513228381.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:01.456Z,1513228381.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:01.847Z,1513228381.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:01.867Z,1513228381.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:02.250Z,1513228382.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:02.266Z,1513228382.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:05.897Z,1513228385.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:05.956Z,1513228385.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:06.046Z,1513228386.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:06.069Z,1513228386.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:06.403Z,1513228386.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:06.450Z,1513228386.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:06.807Z,1513228386.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:06.823Z,1513228386.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:07.209Z,1513228387.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:07.249Z,1513228387.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:07.609Z,1513228387.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:07.657Z,1513228387.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:08.021Z,1513228388.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:08.059Z,1513228388.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:08.241Z,1513228388.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:08.421Z,1513228388.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:08.459Z,1513228388.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:08.824Z,1513228388.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:08.855Z,1513228388.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:09.038Z,1513228389.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:09.212Z,1513228389.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:09.258Z,1513228389.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:09.441Z,1513228389.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:09.619Z,1513228389.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:09.657Z,1513228389.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:10.024Z,1513228390.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:10.094Z,1513228390.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:10.409Z,1513228390.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:10.454Z,1513228390.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:10.826Z,1513228390.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:10.860Z,1513228390.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:11.240Z,1513228391.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:11.260Z,1513228391.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:11.627Z,1513228391.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:11.658Z,1513228391.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:12.004Z,1513228392.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:12.078Z,1513228392.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:12.410Z,1513228392.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:12.425Z,1513228392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:12.823Z,1513228392.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:12.876Z,1513228392.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:13.232Z,1513228393.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:13.250Z,1513228393.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:13.632Z,1513228393.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:13.672Z,1513228393.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:14.004Z,1513228394.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:14.048Z,1513228394.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:14.414Z,1513228394.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:14.436Z,1513228394.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:14.820Z,1513228394.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:14.841Z,1513228394.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:15.230Z,1513228395.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:15.245Z,1513228395.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:15.677Z,1513228395.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:15.704Z,1513228395.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:16.003Z,1513228396.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:16.031Z,1513228396.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:16.407Z,1513228396.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:16.441Z,1513228396.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:16.846Z,1513228396.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:16.878Z,1513228396.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:17.207Z,1513228397.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:17.236Z,1513228397.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:17.607Z,1513228397.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:17.644Z,1513228397.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:18.037Z,1513228398.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:18.052Z,1513228398.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:18.427Z,1513228398.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:18.454Z,1513228398.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:18.841Z,1513228398.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:18.890Z,1513228398.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:19.211Z,1513228399.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:19.251Z,1513228399.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:19.611Z,1513228399.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:19.642Z,1513228399.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:20.013Z,1513228400.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:20.051Z,1513228400.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:20.410Z,1513228400.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:20.460Z,1513228400.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:20.823Z,1513228400.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:20.856Z,1513228400.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:21.226Z,1513228401.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:21.266Z,1513228401.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:21.627Z,1513228401.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:21.651Z,1513228401.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:22.014Z,1513228402.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:22.098Z,1513228402.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:22.419Z,1513228402.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:22.457Z,1513228402.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:22.822Z,1513228402.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:22.863Z,1513228402.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:23.230Z,1513228403.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:23.259Z,1513228403.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:23.626Z,1513228403.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:23.671Z,1513228403.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:24.010Z,1513228404.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:24.025Z,1513228404.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:24.411Z,1513228404.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:24.428Z,1513228404.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:24.813Z,1513228404.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:24.836Z,1513228404.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:25.257Z,1513228405.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:25.287Z,1513228405.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:25.618Z,1513228405.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:25.659Z,1513228405.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:26.017Z,1513228406.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:26.041Z,1513228406.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:26.414Z,1513228406.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:26.438Z,1513228406.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:26.811Z,1513228406.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:26.843Z,1513228406.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:27.216Z,1513228407.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:27.276Z,1513228407.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:27.604Z,1513228407.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:27.646Z,1513228407.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:28.031Z,1513228408.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:28.051Z,1513228408.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:28.442Z,1513228408.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:28.480Z,1513228408.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:28.822Z,1513228408.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:28.853Z,1513228408.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:29.207Z,1513228409.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:29.240Z,1513228409.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:29.604Z,1513228409.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:29.643Z,1513228409.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:30.019Z,1513228410.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:30.058Z,1513228410.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:30.402Z,1513228410.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:30.436Z,1513228410.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:30.823Z,1513228410.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:30.846Z,1513228410.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:31.231Z,1513228411.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:31.246Z,1513228411.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:31.631Z,1513228411.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:31.687Z,1513228411.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:32.003Z,1513228412.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:32.035Z,1513228412.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:32.408Z,1513228412.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:32.442Z,1513228412.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:32.828Z,1513228412.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:32.890Z,1513228412.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:33.229Z,1513228413.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:33.275Z,1513228413.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:33.625Z,1513228413.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:33.682Z,1513228413.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:34.003Z,1513228414.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:34.032Z,1513228414.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:34.401Z,1513228414.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:34.451Z,1513228414.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:34.854Z,1513228414.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:34.888Z,1513228414.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:35.226Z,1513228415.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:35.259Z,1513228415.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:35.625Z,1513228415.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:35.648Z,1513228415.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:36.008Z,1513228416.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:36.040Z,1513228416.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:36.230Z,1513228416.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:36.403Z,1513228416.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:36.435Z,1513228416.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:36.828Z,1513228416.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:36.850Z,1513228416.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:37.027Z,1513228417.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:37.227Z,1513228417.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:37.249Z,1513228417.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:37.433Z,1513228417.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:37.632Z,1513228417.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:37.648Z,1513228417.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:38.003Z,1513228418.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:38.035Z,1513228418.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:38.230Z,1513228418.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:38.402Z,1513228418.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:38.433Z,1513228418.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:38.826Z,1513228418.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:38.847Z,1513228418.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:39.025Z,1513228419.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:39.243Z,1513228419.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:39.262Z,1513228419.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:39.429Z,1513228419.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:39.614Z,1513228419.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:39.660Z,1513228419.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:40.007Z,1513228420.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:40.044Z,1513228420.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:40.396Z,1513228420.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:40.411Z,1513228420.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:40.813Z,1513228420.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:40.846Z,1513228420.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:41.231Z,1513228421.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:41.267Z,1513228421.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:41.621Z,1513228421.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:41.652Z,1513228421.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:42.005Z,1513228422.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:42.020Z,1513228422.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:42.407Z,1513228422.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:42.441Z,1513228422.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:42.825Z,1513228422.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:42.883Z,1513228422.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:43.218Z,1513228423.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:43.232Z,1513228423.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:43.618Z,1513228423.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:43.640Z,1513228423.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:44.012Z,1513228424.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:44.037Z,1513228424.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:44.438Z,1513228424.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:44.479Z,1513228424.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:44.820Z,1513228424.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:44.846Z,1513228424.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:45.221Z,1513228425.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:45.246Z,1513228425.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:45.627Z,1513228425.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:45.641Z,1513228425.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:46.014Z,1513228426.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:46.039Z,1513228426.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:46.409Z,1513228426.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:46.423Z,1513228426.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:46.838Z,1513228426.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:46.867Z,1513228426.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:47.239Z,1513228427.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:47.267Z,1513228427.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:47.633Z,1513228427.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:47.690Z,1513228427.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:48.013Z,1513228428.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:48.027Z,1513228428.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:48.416Z,1513228428.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:48.438Z,1513228428.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:48.823Z,1513228428.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:48.840Z,1513228428.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:49.219Z,1513228429.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:49.267Z,1513228429.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:49.620Z,1513228429.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:49.647Z,1513228429.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:50.017Z,1513228430.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:50.038Z,1513228430.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:50.415Z,1513228430.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:50.438Z,1513228430.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:50.860Z,1513228430.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:50.886Z,1513228430.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:51.229Z,1513228431.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:51.267Z,1513228431.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:51.620Z,1513228431.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:51.644Z,1513228431.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:52.010Z,1513228432.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:52.043Z,1513228432.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:52.403Z,1513228432.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:52.428Z,1513228432.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:52.823Z,1513228432.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:52.844Z,1513228432.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:53.233Z,1513228433.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:53.250Z,1513228433.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:53.633Z,1513228433.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:53.716Z,1513228433.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:54.008Z,1513228434.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:54.058Z,1513228434.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:54.403Z,1513228434.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:54.459Z,1513228434.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:54.821Z,1513228434.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:54.841Z,1513228434.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:55.227Z,1513228435.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:55.282Z,1513228435.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:55.627Z,1513228435.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:55.674Z,1513228435.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:56.008Z,1513228436.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:56.035Z,1513228436.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:56.407Z,1513228436.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:56.442Z,1513228436.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:56.828Z,1513228436.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:56.844Z,1513228436.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:57.252Z,1513228437.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:57.291Z,1513228437.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:57.623Z,1513228437.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:57.655Z,1513228437.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:58.004Z,1513228438.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:58.039Z,1513228438.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:58.429Z,1513228438.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:58.443Z,1513228438.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:58.829Z,1513228438.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:58.874Z,1513228438.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:59.233Z,1513228439.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:59.256Z,1513228439.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:13:59.623Z,1513228439.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:13:59.675Z,1513228439.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:00.006Z,1513228440.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:00.032Z,1513228440.032 [PNI_TCM](ERROR): CRC does not match. Expected:0x13183 got:0x128
2017-12-14T05:14:00.059Z,1513228440.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:00.434Z,1513228440.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:00.476Z,1513228440.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:00.828Z,1513228440.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:00.849Z,1513228440.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:01.236Z,1513228441.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:01.252Z,1513228441.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:01.255Z,1513228441.255 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:14:01.255Z,1513228441.255 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:14:01.255Z,1513228441.255 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:14:01.255Z,1513228441.255 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:14:01.622Z,1513228441.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:01.657Z,1513228441.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:01.665Z,1513228441.665 [Default:CheckIn:D] Stopped
2017-12-14T05:14:01.665Z,1513228441.665 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:14:02.007Z,1513228442.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:02.035Z,1513228442.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:02.039Z,1513228442.039 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 280.771159 min 
2017-12-14T05:14:02.039Z,1513228442.039 [Default:CheckIn:E] Stopped
2017-12-14T05:14:02.039Z,1513228442.039 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:14:02.039Z,1513228442.039 [Default:CheckIn] Stopped
2017-12-14T05:14:02.039Z,1513228442.039 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:14:02.040Z,1513228442.040 [Default:CheckIn](INFO): Running loop #28
2017-12-14T05:14:02.040Z,1513228442.040 [Default:CheckIn] Running Loop=28
2017-12-14T05:14:02.040Z,1513228442.040 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:14:02.040Z,1513228442.040 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:14:02.403Z,1513228442.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:02.444Z,1513228442.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:05.932Z,1513228445.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:05.980Z,1513228445.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:06.097Z,1513228446.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:06.113Z,1513228446.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:06.448Z,1513228446.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:06.467Z,1513228446.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:06.885Z,1513228446.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:06.946Z,1513228446.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:07.257Z,1513228447.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:07.291Z,1513228447.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:07.639Z,1513228447.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:07.666Z,1513228447.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:08.050Z,1513228448.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:08.064Z,1513228448.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:08.085Z,1513228448.085 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T05:14:08.085Z,1513228448.085 [DropWeight] No Fault, FailCount= 1
2017-12-14T05:14:08.454Z,1513228448.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:08.471Z,1513228448.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:08.855Z,1513228448.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:08.870Z,1513228448.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:09.231Z,1513228449.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:09.263Z,1513228449.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:09.628Z,1513228449.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:09.664Z,1513228449.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:10.066Z,1513228450.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:10.103Z,1513228450.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:10.427Z,1513228450.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:10.464Z,1513228450.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:10.839Z,1513228450.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:10.859Z,1513228450.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x10343 got:0x53777
2017-12-14T05:14:10.887Z,1513228450.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:11.256Z,1513228451.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:11.271Z,1513228451.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:11.642Z,1513228451.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:11.677Z,1513228451.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:12.032Z,1513228452.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:12.087Z,1513228452.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:12.433Z,1513228452.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:12.468Z,1513228452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:12.842Z,1513228452.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:12.869Z,1513228452.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:13.244Z,1513228453.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:13.280Z,1513228453.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:13.653Z,1513228453.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:13.680Z,1513228453.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:14.041Z,1513228454.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:14.055Z,1513228454.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:14.436Z,1513228454.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:14.456Z,1513228454.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:14.838Z,1513228454.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:14.882Z,1513228454.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:15.245Z,1513228455.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:15.260Z,1513228455.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:15.643Z,1513228455.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:15.658Z,1513228455.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:16.048Z,1513228456.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:16.075Z,1513228456.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:16.478Z,1513228456.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:16.547Z,1513228456.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:16.844Z,1513228456.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:16.874Z,1513228456.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:17.254Z,1513228457.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:17.326Z,1513228457.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:17.651Z,1513228457.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:17.665Z,1513228457.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:18.032Z,1513228458.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:18.075Z,1513228458.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:18.431Z,1513228458.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:18.501Z,1513228458.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:18.853Z,1513228458.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:18.876Z,1513228458.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:19.242Z,1513228459.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:19.306Z,1513228459.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:19.666Z,1513228459.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:19.710Z,1513228459.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:20.028Z,1513228460.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:20.071Z,1513228460.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:20.424Z,1513228460.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:20.460Z,1513228460.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:20.840Z,1513228460.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:20.867Z,1513228460.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:21.263Z,1513228461.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:21.283Z,1513228461.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:21.640Z,1513228461.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:21.671Z,1513228461.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:22.039Z,1513228462.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:22.070Z,1513228462.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:22.434Z,1513228462.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:22.448Z,1513228462.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:22.841Z,1513228462.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:22.916Z,1513228462.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:23.250Z,1513228463.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:23.275Z,1513228463.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:23.646Z,1513228463.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:23.675Z,1513228463.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:24.036Z,1513228464.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:24.071Z,1513228464.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:24.435Z,1513228464.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:24.474Z,1513228464.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:24.854Z,1513228464.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:24.880Z,1513228464.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:25.245Z,1513228465.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:25.260Z,1513228465.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:25.648Z,1513228465.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:25.663Z,1513228465.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:26.079Z,1513228466.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:26.133Z,1513228466.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:26.435Z,1513228466.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:26.458Z,1513228466.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:26.844Z,1513228466.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:26.860Z,1513228466.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:27.247Z,1513228467.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:27.261Z,1513228467.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:27.641Z,1513228467.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:27.707Z,1513228467.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:28.041Z,1513228468.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:28.051Z,1513228468.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x59488 got:0x17433
2017-12-14T05:14:28.087Z,1513228468.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:28.441Z,1513228468.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:28.469Z,1513228468.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:28.850Z,1513228468.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:28.865Z,1513228468.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:29.253Z,1513228469.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:29.291Z,1513228469.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:29.656Z,1513228469.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:29.672Z,1513228469.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:30.036Z,1513228470.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:30.061Z,1513228470.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:30.432Z,1513228470.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:30.458Z,1513228470.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:30.852Z,1513228470.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:30.874Z,1513228470.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:31.262Z,1513228471.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:31.277Z,1513228471.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:31.648Z,1513228471.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:31.669Z,1513228471.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:32.032Z,1513228472.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:32.058Z,1513228472.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:32.443Z,1513228472.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:32.493Z,1513228472.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:32.840Z,1513228472.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:32.869Z,1513228472.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:33.256Z,1513228473.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:33.279Z,1513228473.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:33.637Z,1513228473.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:33.676Z,1513228473.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:34.032Z,1513228474.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:34.080Z,1513228474.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:34.431Z,1513228474.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:34.468Z,1513228474.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:34.841Z,1513228474.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:34.866Z,1513228474.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:35.242Z,1513228475.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:35.275Z,1513228475.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:35.665Z,1513228475.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:35.683Z,1513228475.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:36.048Z,1513228476.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:36.078Z,1513228476.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:36.443Z,1513228476.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:36.478Z,1513228476.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:36.866Z,1513228476.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:36.888Z,1513228476.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:37.256Z,1513228477.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:37.287Z,1513228477.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:37.647Z,1513228477.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:37.662Z,1513228477.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:38.047Z,1513228478.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:38.102Z,1513228478.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:38.431Z,1513228478.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:38.487Z,1513228478.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:38.893Z,1513228478.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:38.943Z,1513228478.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:39.250Z,1513228479.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:39.267Z,1513228479.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:39.652Z,1513228479.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:39.703Z,1513228479.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:40.038Z,1513228480.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:40.065Z,1513228480.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:40.441Z,1513228480.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:40.491Z,1513228480.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:40.852Z,1513228480.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:40.858Z,1513228480.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x24523 got:0x6591
2017-12-14T05:14:40.895Z,1513228480.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:41.251Z,1513228481.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:41.280Z,1513228481.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:41.651Z,1513228481.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:41.666Z,1513228481.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:42.072Z,1513228482.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:42.107Z,1513228482.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:42.454Z,1513228482.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:42.475Z,1513228482.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:42.855Z,1513228482.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:42.875Z,1513228482.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:43.254Z,1513228483.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:43.269Z,1513228483.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:43.654Z,1513228483.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:43.670Z,1513228483.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:44.031Z,1513228484.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:44.065Z,1513228484.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:44.421Z,1513228484.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:44.457Z,1513228484.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:44.847Z,1513228484.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:44.857Z,1513228484.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x30184 got:0x38443
2017-12-14T05:14:44.875Z,1513228484.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:45.258Z,1513228485.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:45.289Z,1513228485.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:45.641Z,1513228485.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:45.672Z,1513228485.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:46.037Z,1513228486.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:46.064Z,1513228486.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:46.437Z,1513228486.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:46.463Z,1513228486.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:46.834Z,1513228486.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:46.868Z,1513228486.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:47.258Z,1513228487.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:47.265Z,1513228487.265 [PNI_TCM](ERROR): CRC does not match. Expected:0x28413 got:0x16962
2017-12-14T05:14:47.307Z,1513228487.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:47.656Z,1513228487.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:47.671Z,1513228487.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:48.032Z,1513228488.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:48.063Z,1513228488.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:48.466Z,1513228488.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:48.514Z,1513228488.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:48.857Z,1513228488.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:48.908Z,1513228488.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:49.255Z,1513228489.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:49.274Z,1513228489.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:49.642Z,1513228489.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:49.675Z,1513228489.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:50.032Z,1513228490.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:50.072Z,1513228490.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:50.427Z,1513228490.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:50.469Z,1513228490.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:50.856Z,1513228490.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:50.871Z,1513228490.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:51.259Z,1513228491.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:51.281Z,1513228491.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:51.658Z,1513228491.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:51.697Z,1513228491.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:52.039Z,1513228492.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:52.072Z,1513228492.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:52.440Z,1513228492.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:52.476Z,1513228492.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:52.865Z,1513228492.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:52.880Z,1513228492.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:53.267Z,1513228493.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:53.288Z,1513228493.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:53.650Z,1513228493.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:53.676Z,1513228493.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:54.040Z,1513228494.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:54.071Z,1513228494.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:54.438Z,1513228494.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:54.452Z,1513228494.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:54.895Z,1513228494.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:54.943Z,1513228494.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:55.256Z,1513228495.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:55.279Z,1513228495.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:55.646Z,1513228495.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:55.673Z,1513228495.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:56.044Z,1513228496.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:56.058Z,1513228496.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:56.438Z,1513228496.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:56.478Z,1513228496.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:56.839Z,1513228496.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:56.858Z,1513228496.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:57.243Z,1513228497.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:57.259Z,1513228497.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:57.642Z,1513228497.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:57.665Z,1513228497.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:58.056Z,1513228498.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:58.106Z,1513228498.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:58.437Z,1513228498.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:58.457Z,1513228498.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:58.847Z,1513228498.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:58.862Z,1513228498.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:59.248Z,1513228499.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:59.263Z,1513228499.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:14:59.642Z,1513228499.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:14:59.665Z,1513228499.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:00.034Z,1513228500.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:00.130Z,1513228500.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:00.445Z,1513228500.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:00.460Z,1513228500.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:00.853Z,1513228500.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:00.899Z,1513228500.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:01.257Z,1513228501.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:01.280Z,1513228501.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:01.659Z,1513228501.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:01.703Z,1513228501.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:02.037Z,1513228502.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:02.067Z,1513228502.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:02.432Z,1513228502.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:02.468Z,1513228502.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:05.869Z,1513228505.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:05.884Z,1513228505.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:06.005Z,1513228506.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:06.039Z,1513228506.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:06.372Z,1513228506.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:06.386Z,1513228506.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:06.771Z,1513228506.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:06.791Z,1513228506.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:07.168Z,1513228507.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:07.188Z,1513228507.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:07.573Z,1513228507.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:07.588Z,1513228507.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:07.980Z,1513228507.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:07.995Z,1513228507.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:08.380Z,1513228508.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:08.407Z,1513228508.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:08.789Z,1513228508.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:08.807Z,1513228508.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:09.160Z,1513228509.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:09.191Z,1513228509.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:09.575Z,1513228509.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:09.595Z,1513228509.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:09.974Z,1513228509.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:10.012Z,1513228510.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:10.377Z,1513228510.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:10.391Z,1513228510.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:10.824Z,1513228510.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:10.890Z,1513228510.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:11.190Z,1513228511.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:11.204Z,1513228511.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:11.586Z,1513228511.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:11.601Z,1513228511.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:11.970Z,1513228511.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:12.006Z,1513228512.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:12.359Z,1513228512.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:12.395Z,1513228512.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:12.753Z,1513228512.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:12.767Z,1513228512.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:13.160Z,1513228513.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:13.175Z,1513228513.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:13.563Z,1513228513.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:13.578Z,1513228513.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:13.977Z,1513228513.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:14.024Z,1513228514.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:14.374Z,1513228514.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:14.389Z,1513228514.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:14.772Z,1513228514.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:14.787Z,1513228514.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:15.173Z,1513228515.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:15.188Z,1513228515.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:15.574Z,1513228515.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:15.589Z,1513228515.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:15.974Z,1513228515.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:15.988Z,1513228515.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:16.365Z,1513228516.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:16.392Z,1513228516.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:16.765Z,1513228516.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:16.789Z,1513228516.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:17.199Z,1513228517.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:17.231Z,1513228517.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:17.582Z,1513228517.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:17.597Z,1513228517.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:17.987Z,1513228517.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:18.007Z,1513228518.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:18.365Z,1513228518.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:18.395Z,1513228518.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:18.760Z,1513228518.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:18.796Z,1513228518.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:19.165Z,1513228519.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:19.199Z,1513228519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:19.559Z,1513228519.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:19.591Z,1513228519.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:19.988Z,1513228519.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:20.002Z,1513228520.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:20.401Z,1513228520.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:20.434Z,1513228520.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:20.769Z,1513228520.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:20.806Z,1513228520.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:21.167Z,1513228521.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:21.256Z,1513228521.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:21.566Z,1513228521.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:21.590Z,1513228521.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:21.980Z,1513228521.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:22.031Z,1513228522.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:22.374Z,1513228522.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:22.388Z,1513228522.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:22.769Z,1513228522.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:22.833Z,1513228522.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:23.178Z,1513228523.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:23.192Z,1513228523.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:23.614Z,1513228523.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:23.640Z,1513228523.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:23.978Z,1513228523.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:23.994Z,1513228523.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:24.359Z,1513228524.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:24.384Z,1513228524.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:24.791Z,1513228524.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:24.806Z,1513228524.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:25.174Z,1513228525.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:25.189Z,1513228525.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:25.560Z,1513228525.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:25.599Z,1513228525.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:25.987Z,1513228525.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:26.002Z,1513228526.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:26.380Z,1513228526.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:26.395Z,1513228526.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:26.805Z,1513228526.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:26.851Z,1513228526.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:27.159Z,1513228527.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:27.195Z,1513228527.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:27.561Z,1513228527.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:27.588Z,1513228527.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:27.968Z,1513228527.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:27.999Z,1513228527.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:28.354Z,1513228528.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:28.368Z,1513228528.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:28.764Z,1513228528.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:28.787Z,1513228528.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:29.169Z,1513228529.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:29.199Z,1513228529.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:29.573Z,1513228529.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:29.603Z,1513228529.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:29.979Z,1513228529.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:30.011Z,1513228530.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:30.366Z,1513228530.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:30.406Z,1513228530.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:30.764Z,1513228530.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:30.791Z,1513228530.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:31.164Z,1513228531.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:31.226Z,1513228531.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:31.567Z,1513228531.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:31.582Z,1513228531.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:31.979Z,1513228531.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:31.999Z,1513228531.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:32.378Z,1513228532.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:32.399Z,1513228532.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:32.779Z,1513228532.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:32.799Z,1513228532.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:33.202Z,1513228533.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:33.231Z,1513228533.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:33.582Z,1513228533.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:33.598Z,1513228533.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:33.959Z,1513228533.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:33.985Z,1513228533.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:34.357Z,1513228534.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:34.384Z,1513228534.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:34.759Z,1513228534.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:34.786Z,1513228534.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:35.143Z,1513228535.143 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:15:35.143Z,1513228535.143 [NAL9602] Data Fault, FailCount= 1
2017-12-14T05:15:35.143Z,1513228535.143 [NAL9602](ERROR): Data Fault
2017-12-14T05:15:35.160Z,1513228535.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:35.196Z,1513228535.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:35.225Z,1513228535.225 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:15:35.542Z,1513228535.542 [NAL9602](INFO): Powering down
2017-12-14T05:15:35.560Z,1513228535.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:35.600Z,1513228535.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:35.959Z,1513228535.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:35.986Z,1513228535.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:36.371Z,1513228536.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:36.410Z,1513228536.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:36.464Z,1513228536.464 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T05:15:36.464Z,1513228536.464 [NAL9602] No Fault, FailCount= 1
2017-12-14T05:15:36.759Z,1513228536.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:36.774Z,1513228536.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:37.164Z,1513228537.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:37.178Z,1513228537.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:37.179Z,1513228537.179 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2017-12-14T05:15:37.179Z,1513228537.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:15:37.180Z,1513228537.180 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:37.180Z,1513228537.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2017-12-14T05:15:37.180Z,1513228537.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:15:37.195Z,1513228537.195 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:37.195Z,1513228537.195 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2017-12-14T05:15:37.195Z,1513228537.195 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:15:37.215Z,1513228537.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:15:37.215Z,1513228537.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:15:37.216Z,1513228537.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:15:37.569Z,1513228537.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:37.624Z,1513228537.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:15:37.624Z,1513228537.624 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2017-12-14T05:15:37.625Z,1513228537.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:15:37.625Z,1513228537.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2017-12-14T05:15:37.626Z,1513228537.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:15:37.626Z,1513228537.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2017-12-14T05:15:37.965Z,1513228537.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:37.978Z,1513228537.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:15:37.978Z,1513228537.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:15:37.979Z,1513228537.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:15:37.979Z,1513228537.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:15:37.979Z,1513228537.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:15:37.980Z,1513228537.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:15:37.980Z,1513228537.980 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:15:37.981Z,1513228537.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:15:37.981Z,1513228537.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:15:38.370Z,1513228538.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:38.385Z,1513228538.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:38.780Z,1513228538.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:38.823Z,1513228538.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:39.163Z,1513228539.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:39.190Z,1513228539.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:39.578Z,1513228539.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:39.619Z,1513228539.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:39.959Z,1513228539.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:39.991Z,1513228539.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:40.201Z,1513228540.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:40.379Z,1513228540.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:40.393Z,1513228540.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:40.760Z,1513228540.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:40.796Z,1513228540.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:40.999Z,1513228540.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:41.160Z,1513228541.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:41.196Z,1513228541.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:41.421Z,1513228541.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:41.559Z,1513228541.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:41.619Z,1513228541.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:41.962Z,1513228541.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:41.990Z,1513228541.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:42.218Z,1513228542.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:42.363Z,1513228542.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:42.377Z,1513228542.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:42.763Z,1513228542.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:42.853Z,1513228542.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:43.015Z,1513228543.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:43.167Z,1513228543.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:43.215Z,1513228543.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:43.425Z,1513228543.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:43.564Z,1513228543.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:43.580Z,1513228543.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:43.968Z,1513228543.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:43.982Z,1513228543.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:44.221Z,1513228544.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:44.359Z,1513228544.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:44.408Z,1513228544.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:44.759Z,1513228544.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:44.795Z,1513228544.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:45.018Z,1513228545.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:45.159Z,1513228545.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:45.214Z,1513228545.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:45.421Z,1513228545.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:45.564Z,1513228545.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:45.600Z,1513228545.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:46.020Z,1513228546.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:46.088Z,1513228546.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:46.217Z,1513228546.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:46.356Z,1513228546.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:46.371Z,1513228546.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:46.759Z,1513228546.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:46.773Z,1513228546.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:47.013Z,1513228547.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:47.170Z,1513228547.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:47.205Z,1513228547.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:47.417Z,1513228547.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:47.564Z,1513228547.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:47.578Z,1513228547.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:47.963Z,1513228547.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:47.979Z,1513228547.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:48.214Z,1513228548.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:48.359Z,1513228548.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:48.373Z,1513228548.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:48.763Z,1513228548.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:48.778Z,1513228548.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:49.009Z,1513228549.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:49.197Z,1513228549.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:49.237Z,1513228549.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:49.413Z,1513228549.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:49.581Z,1513228549.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:49.603Z,1513228549.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:49.971Z,1513228549.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:49.986Z,1513228549.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:50.357Z,1513228550.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:50.397Z,1513228550.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:50.759Z,1513228550.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:50.787Z,1513228550.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:51.172Z,1513228551.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:51.188Z,1513228551.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:51.559Z,1513228551.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:51.590Z,1513228551.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:51.963Z,1513228551.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:51.989Z,1513228551.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:52.387Z,1513228552.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:52.410Z,1513228552.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:52.776Z,1513228552.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:52.808Z,1513228552.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:53.168Z,1513228553.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:53.191Z,1513228553.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:53.572Z,1513228553.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:53.613Z,1513228553.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:53.972Z,1513228553.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:53.988Z,1513228553.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:54.202Z,1513228554.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:54.367Z,1513228554.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:54.383Z,1513228554.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:54.767Z,1513228554.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:54.782Z,1513228554.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:55.006Z,1513228555.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:55.168Z,1513228555.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:55.183Z,1513228555.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:55.429Z,1513228555.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:55.606Z,1513228555.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:55.630Z,1513228555.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:55.980Z,1513228555.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:55.995Z,1513228555.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:56.226Z,1513228556.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:56.374Z,1513228556.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:56.389Z,1513228556.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:56.767Z,1513228556.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:56.787Z,1513228556.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:57.023Z,1513228557.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:57.179Z,1513228557.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:57.194Z,1513228557.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:57.433Z,1513228557.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:57.568Z,1513228557.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:57.583Z,1513228557.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:57.979Z,1513228557.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:57.993Z,1513228557.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:58.229Z,1513228558.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:58.366Z,1513228558.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:58.390Z,1513228558.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:58.784Z,1513228558.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:58.808Z,1513228558.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:59.025Z,1513228559.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:59.159Z,1513228559.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:59.211Z,1513228559.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:59.429Z,1513228559.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:59.559Z,1513228559.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:59.596Z,1513228559.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:15:59.963Z,1513228559.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:15:59.994Z,1513228559.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:00.226Z,1513228560.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:00.364Z,1513228560.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:00.378Z,1513228560.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:00.759Z,1513228560.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:00.779Z,1513228560.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:01.021Z,1513228561.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:01.159Z,1513228561.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:01.180Z,1513228561.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:01.425Z,1513228561.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:01.563Z,1513228561.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:01.578Z,1513228561.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:01.979Z,1513228561.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:02.023Z,1513228562.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:02.222Z,1513228562.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:02.371Z,1513228562.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:02.386Z,1513228562.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:02.769Z,1513228562.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:02.783Z,1513228562.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:03.017Z,1513228563.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:03.421Z,1513228563.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:04.217Z,1513228564.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:05.013Z,1513228565.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:05.417Z,1513228565.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:06.200Z,1513228566.200 [NAL9602](INFO): Powering up NAL9602
2017-12-14T05:16:06.214Z,1513228566.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:06.219Z,1513228566.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:06.278Z,1513228566.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:06.372Z,1513228566.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:06.412Z,1513228566.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:06.787Z,1513228566.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:06.828Z,1513228566.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:07.009Z,1513228567.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:07.140Z,1513228567.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:07.179Z,1513228567.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:07.413Z,1513228567.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:07.536Z,1513228567.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:07.595Z,1513228567.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:07.942Z,1513228567.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:07.975Z,1513228567.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:08.209Z,1513228568.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:08.336Z,1513228568.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:08.351Z,1513228568.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:08.745Z,1513228568.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:08.760Z,1513228568.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:09.007Z,1513228569.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:09.151Z,1513228569.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:09.165Z,1513228569.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:09.429Z,1513228569.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:09.541Z,1513228569.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:09.556Z,1513228569.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:09.943Z,1513228569.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:09.963Z,1513228569.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:10.226Z,1513228570.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:10.341Z,1513228570.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:10.356Z,1513228570.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:10.741Z,1513228570.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:10.756Z,1513228570.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:11.023Z,1513228571.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:11.136Z,1513228571.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:11.164Z,1513228571.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:11.441Z,1513228571.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:11.569Z,1513228571.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:11.604Z,1513228571.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:11.934Z,1513228571.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:11.967Z,1513228571.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:12.237Z,1513228572.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:12.336Z,1513228572.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:12.352Z,1513228572.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:12.736Z,1513228572.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:12.774Z,1513228572.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:13.033Z,1513228573.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:13.135Z,1513228573.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:13.171Z,1513228573.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:13.437Z,1513228573.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:13.539Z,1513228573.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:13.571Z,1513228573.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:13.935Z,1513228573.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:13.968Z,1513228573.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:14.233Z,1513228574.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:14.332Z,1513228574.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:14.366Z,1513228574.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:14.737Z,1513228574.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:14.772Z,1513228574.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:15.029Z,1513228575.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:15.135Z,1513228575.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:15.167Z,1513228575.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:15.433Z,1513228575.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:15.534Z,1513228575.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:15.549Z,1513228575.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:15.940Z,1513228575.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:15.999Z,1513228575.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:16.230Z,1513228576.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:16.339Z,1513228576.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:16.354Z,1513228576.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:16.749Z,1513228576.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:16.799Z,1513228576.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:17.025Z,1513228577.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:17.123Z,1513228577.123 [NAL9602](INFO): NAL9602 initialized
2017-12-14T05:16:17.140Z,1513228577.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:17.182Z,1513228577.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:17.429Z,1513228577.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:17.543Z,1513228577.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:17.576Z,1513228577.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:17.953Z,1513228577.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:17.976Z,1513228577.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:18.226Z,1513228578.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:18.346Z,1513228578.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:18.381Z,1513228578.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:18.750Z,1513228578.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:18.785Z,1513228578.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:19.022Z,1513228579.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:19.141Z,1513228579.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:19.196Z,1513228579.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:19.425Z,1513228579.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:19.569Z,1513228579.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:19.615Z,1513228579.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:19.947Z,1513228579.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:19.986Z,1513228579.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:20.337Z,1513228580.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:20.385Z,1513228580.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:20.777Z,1513228580.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:20.839Z,1513228580.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:21.173Z,1513228581.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:21.192Z,1513228581.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:21.552Z,1513228581.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:21.592Z,1513228581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:21.941Z,1513228581.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:21.979Z,1513228581.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:22.354Z,1513228582.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:22.391Z,1513228582.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:22.746Z,1513228582.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:22.789Z,1513228582.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:23.155Z,1513228583.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:23.190Z,1513228583.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:23.552Z,1513228583.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:23.603Z,1513228583.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:23.956Z,1513228583.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:23.998Z,1513228583.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:24.372Z,1513228584.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:24.412Z,1513228584.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:24.765Z,1513228584.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:24.810Z,1513228584.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:25.142Z,1513228585.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:25.217Z,1513228585.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:25.551Z,1513228585.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:25.591Z,1513228585.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:25.955Z,1513228585.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:25.995Z,1513228585.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:26.344Z,1513228586.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:26.367Z,1513228586.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:26.783Z,1513228586.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:26.802Z,1513228586.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:27.182Z,1513228587.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:27.197Z,1513228587.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:27.558Z,1513228587.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:27.643Z,1513228587.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:27.937Z,1513228587.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:28.002Z,1513228588.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:28.354Z,1513228588.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:28.370Z,1513228588.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:28.748Z,1513228588.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:28.811Z,1513228588.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:29.148Z,1513228589.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:29.167Z,1513228589.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:29.559Z,1513228589.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:29.607Z,1513228589.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:29.962Z,1513228589.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:29.978Z,1513228589.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:30.377Z,1513228590.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:30.419Z,1513228590.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:30.766Z,1513228590.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:30.816Z,1513228590.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:31.138Z,1513228591.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:31.181Z,1513228591.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:31.538Z,1513228591.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:31.599Z,1513228591.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:31.963Z,1513228591.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:31.999Z,1513228591.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:32.352Z,1513228592.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:32.367Z,1513228592.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:32.748Z,1513228592.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:32.783Z,1513228592.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:33.156Z,1513228593.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:33.192Z,1513228593.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:33.548Z,1513228593.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:33.637Z,1513228593.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:33.938Z,1513228593.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:33.983Z,1513228593.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:34.360Z,1513228594.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:34.400Z,1513228594.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:34.791Z,1513228594.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:34.841Z,1513228594.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:35.146Z,1513228595.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:35.214Z,1513228595.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:35.568Z,1513228595.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:35.602Z,1513228595.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:35.951Z,1513228595.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:35.995Z,1513228595.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:36.351Z,1513228596.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:36.397Z,1513228596.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:36.747Z,1513228596.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:36.770Z,1513228596.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:37.142Z,1513228597.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:37.174Z,1513228597.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:37.548Z,1513228597.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:37.563Z,1513228597.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:37.946Z,1513228597.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:38.028Z,1513228598.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:38.350Z,1513228598.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:38.393Z,1513228598.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:38.752Z,1513228598.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:38.776Z,1513228598.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:39.161Z,1513228599.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:39.205Z,1513228599.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:39.563Z,1513228599.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:39.587Z,1513228599.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:39.938Z,1513228599.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:39.986Z,1513228599.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:40.354Z,1513228600.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:40.384Z,1513228600.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:40.743Z,1513228600.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:40.795Z,1513228600.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:41.154Z,1513228601.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:41.195Z,1513228601.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:41.551Z,1513228601.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:41.598Z,1513228601.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:41.951Z,1513228601.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:41.987Z,1513228601.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:42.346Z,1513228602.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:42.362Z,1513228602.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:42.744Z,1513228602.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:42.785Z,1513228602.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:43.140Z,1513228603.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:43.163Z,1513228603.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:43.548Z,1513228603.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:43.695Z,1513228603.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:43.949Z,1513228603.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:43.988Z,1513228603.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:44.346Z,1513228604.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:44.360Z,1513228604.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:44.750Z,1513228604.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:44.793Z,1513228604.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:45.161Z,1513228605.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:45.177Z,1513228605.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:45.558Z,1513228605.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:45.573Z,1513228605.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:45.935Z,1513228605.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:45.972Z,1513228605.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:46.349Z,1513228606.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:46.364Z,1513228606.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:46.746Z,1513228606.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:46.768Z,1513228606.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:47.164Z,1513228607.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:47.179Z,1513228607.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:47.563Z,1513228607.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:47.595Z,1513228607.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:47.966Z,1513228607.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:47.985Z,1513228607.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:48.346Z,1513228608.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:48.377Z,1513228608.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:48.801Z,1513228608.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:48.840Z,1513228608.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:49.149Z,1513228609.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:49.164Z,1513228609.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:49.544Z,1513228609.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:49.560Z,1513228609.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:49.941Z,1513228609.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:50.030Z,1513228610.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:50.348Z,1513228610.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:50.363Z,1513228610.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:50.754Z,1513228610.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:50.814Z,1513228610.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:51.195Z,1513228611.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:51.246Z,1513228611.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:51.560Z,1513228611.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:51.611Z,1513228611.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:51.948Z,1513228611.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:51.971Z,1513228611.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:52.335Z,1513228612.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:52.368Z,1513228612.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:52.736Z,1513228612.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:52.768Z,1513228612.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:53.156Z,1513228613.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:53.175Z,1513228613.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:53.567Z,1513228613.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:53.587Z,1513228613.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:53.965Z,1513228613.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:53.979Z,1513228613.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:54.380Z,1513228614.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:54.430Z,1513228614.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:54.737Z,1513228614.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:54.776Z,1513228614.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:55.143Z,1513228615.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:55.159Z,1513228615.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:55.538Z,1513228615.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:55.553Z,1513228615.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:55.945Z,1513228615.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:55.960Z,1513228615.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:56.345Z,1513228616.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:56.361Z,1513228616.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:56.750Z,1513228616.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:56.767Z,1513228616.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:57.150Z,1513228617.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:57.165Z,1513228617.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:57.582Z,1513228617.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:57.652Z,1513228617.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:57.946Z,1513228617.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:57.961Z,1513228617.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:58.344Z,1513228618.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:58.359Z,1513228618.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:58.747Z,1513228618.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:58.769Z,1513228618.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:59.142Z,1513228619.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:59.159Z,1513228619.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:59.554Z,1513228619.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:16:59.574Z,1513228619.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:16:59.962Z,1513228619.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:00.011Z,1513228620.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:00.361Z,1513228620.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:00.376Z,1513228620.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:00.771Z,1513228620.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:00.810Z,1513228620.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:01.135Z,1513228621.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:01.172Z,1513228621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:01.535Z,1513228621.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:01.567Z,1513228621.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:01.935Z,1513228621.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:01.967Z,1513228621.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:02.335Z,1513228622.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:02.368Z,1513228622.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:02.803Z,1513228622.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:02.824Z,1513228622.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:03.170Z,1513228623.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:03.192Z,1513228623.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:06.720Z,1513228626.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:06.735Z,1513228626.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:06.839Z,1513228626.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:06.869Z,1513228626.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:07.223Z,1513228627.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:07.271Z,1513228627.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:07.621Z,1513228627.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:07.667Z,1513228627.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:08.020Z,1513228628.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:08.040Z,1513228628.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:08.415Z,1513228628.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:08.439Z,1513228628.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:08.831Z,1513228628.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:08.848Z,1513228628.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:09.230Z,1513228629.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:09.270Z,1513228629.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:09.626Z,1513228629.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:09.650Z,1513228629.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:10.016Z,1513228630.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:10.038Z,1513228630.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:10.426Z,1513228630.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:10.446Z,1513228630.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:10.828Z,1513228630.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:10.877Z,1513228630.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:11.207Z,1513228631.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:11.246Z,1513228631.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:11.636Z,1513228631.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:11.651Z,1513228631.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:12.038Z,1513228632.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:12.103Z,1513228632.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:12.432Z,1513228632.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:12.459Z,1513228632.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:12.807Z,1513228632.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:12.859Z,1513228632.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:13.211Z,1513228633.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:13.243Z,1513228633.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:13.634Z,1513228633.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:13.689Z,1513228633.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:14.012Z,1513228634.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:14.053Z,1513228634.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:14.449Z,1513228634.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:14.464Z,1513228634.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:14.822Z,1513228634.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:14.856Z,1513228634.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:15.235Z,1513228635.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:15.313Z,1513228635.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:15.622Z,1513228635.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:15.667Z,1513228635.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:16.011Z,1513228636.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:16.054Z,1513228636.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:16.406Z,1513228636.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:16.421Z,1513228636.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:16.827Z,1513228636.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:16.875Z,1513228636.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:17.212Z,1513228637.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:17.257Z,1513228637.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:17.614Z,1513228637.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:17.628Z,1513228637.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:18.028Z,1513228638.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:18.058Z,1513228638.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:18.429Z,1513228638.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:18.452Z,1513228638.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:18.870Z,1513228638.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:18.902Z,1513228638.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:19.212Z,1513228639.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:19.259Z,1513228639.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:19.615Z,1513228639.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:19.662Z,1513228639.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:20.029Z,1513228640.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:20.073Z,1513228640.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:20.418Z,1513228640.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:20.471Z,1513228640.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:20.829Z,1513228640.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:20.860Z,1513228640.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:21.218Z,1513228641.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:21.240Z,1513228641.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:21.633Z,1513228641.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:21.664Z,1513228641.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:22.015Z,1513228642.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:22.072Z,1513228642.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:22.415Z,1513228642.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:22.441Z,1513228642.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:22.814Z,1513228642.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:22.844Z,1513228642.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:23.236Z,1513228643.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:23.282Z,1513228643.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:23.630Z,1513228643.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:23.668Z,1513228643.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:24.029Z,1513228644.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:24.051Z,1513228644.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:24.433Z,1513228644.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:24.448Z,1513228644.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:24.804Z,1513228644.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:24.872Z,1513228644.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:25.211Z,1513228645.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:25.270Z,1513228645.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:25.604Z,1513228645.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:25.643Z,1513228645.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:26.024Z,1513228646.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:26.046Z,1513228646.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:26.433Z,1513228646.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:26.468Z,1513228646.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:26.832Z,1513228646.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:26.866Z,1513228646.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:27.217Z,1513228647.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:27.251Z,1513228647.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:27.617Z,1513228647.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:27.659Z,1513228647.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:28.011Z,1513228648.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:28.044Z,1513228648.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:28.409Z,1513228648.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:28.456Z,1513228648.456 [PNI_TCM](ERROR): CRC does not match. Expected:0x7185 got:0x44760
2017-12-14T05:17:28.490Z,1513228648.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:28.808Z,1513228648.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:28.855Z,1513228648.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:29.207Z,1513228649.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:29.248Z,1513228649.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:29.646Z,1513228649.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:29.669Z,1513228649.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:30.029Z,1513228650.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:30.061Z,1513228650.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:30.425Z,1513228650.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:30.462Z,1513228650.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:30.816Z,1513228650.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:30.838Z,1513228650.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:31.217Z,1513228651.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:31.238Z,1513228651.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:31.616Z,1513228651.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:31.718Z,1513228651.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:32.016Z,1513228652.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:32.061Z,1513228652.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:32.414Z,1513228652.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:32.440Z,1513228652.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:32.848Z,1513228652.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:32.872Z,1513228652.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:33.225Z,1513228653.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:33.267Z,1513228653.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:33.624Z,1513228653.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:33.694Z,1513228653.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:34.020Z,1513228654.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:34.042Z,1513228654.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:34.426Z,1513228654.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:34.479Z,1513228654.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:34.812Z,1513228654.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:34.859Z,1513228654.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:35.224Z,1513228655.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:35.245Z,1513228655.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:35.635Z,1513228655.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:35.683Z,1513228655.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:36.028Z,1513228656.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:36.067Z,1513228656.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:36.421Z,1513228656.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:36.486Z,1513228656.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:36.814Z,1513228656.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:36.849Z,1513228656.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:37.214Z,1513228657.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:37.240Z,1513228657.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:37.623Z,1513228657.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:37.658Z,1513228657.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:38.013Z,1513228658.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:38.058Z,1513228658.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:38.412Z,1513228658.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:38.431Z,1513228658.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:38.820Z,1513228658.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:38.861Z,1513228658.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:39.248Z,1513228659.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:39.279Z,1513228659.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:39.629Z,1513228659.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:39.668Z,1513228659.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:40.018Z,1513228660.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:40.032Z,1513228660.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:40.407Z,1513228660.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:40.451Z,1513228660.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:40.819Z,1513228660.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:40.838Z,1513228660.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:41.214Z,1513228661.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:41.239Z,1513228661.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:41.622Z,1513228661.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:41.645Z,1513228661.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:42.029Z,1513228662.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:42.048Z,1513228662.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:42.461Z,1513228662.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:42.516Z,1513228662.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:42.816Z,1513228662.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:42.866Z,1513228662.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:43.214Z,1513228663.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:43.240Z,1513228663.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:43.621Z,1513228663.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:43.643Z,1513228663.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:44.026Z,1513228664.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:44.041Z,1513228664.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:44.422Z,1513228664.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:44.465Z,1513228664.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:44.826Z,1513228664.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:44.879Z,1513228664.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:45.230Z,1513228665.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:45.248Z,1513228665.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:45.652Z,1513228665.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:45.686Z,1513228665.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:46.016Z,1513228666.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:46.070Z,1513228666.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:46.421Z,1513228666.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:46.448Z,1513228666.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:46.825Z,1513228666.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:46.847Z,1513228666.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:47.232Z,1513228667.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:47.263Z,1513228667.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:47.624Z,1513228667.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:47.672Z,1513228667.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:48.033Z,1513228668.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:48.056Z,1513228668.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:48.433Z,1513228668.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:48.448Z,1513228668.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:48.804Z,1513228668.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:48.872Z,1513228668.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:49.207Z,1513228669.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:49.243Z,1513228669.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:49.608Z,1513228669.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:49.646Z,1513228669.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:50.012Z,1513228670.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:50.047Z,1513228670.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:50.406Z,1513228670.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:50.441Z,1513228670.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:50.827Z,1513228670.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:50.842Z,1513228670.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:51.227Z,1513228671.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:51.260Z,1513228671.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:51.638Z,1513228671.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:51.659Z,1513228671.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:52.009Z,1513228672.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:52.043Z,1513228672.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:52.418Z,1513228672.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:52.467Z,1513228672.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:52.818Z,1513228672.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:52.833Z,1513228672.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:53.224Z,1513228673.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:53.263Z,1513228673.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:53.632Z,1513228673.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:53.663Z,1513228673.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:54.025Z,1513228674.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:54.063Z,1513228674.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:54.430Z,1513228674.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:54.459Z,1513228674.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:54.817Z,1513228674.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:54.862Z,1513228674.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:55.212Z,1513228675.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:55.264Z,1513228675.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:55.614Z,1513228675.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:55.643Z,1513228675.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:56.018Z,1513228676.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:56.033Z,1513228676.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:56.419Z,1513228676.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:56.440Z,1513228676.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:56.831Z,1513228676.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:56.923Z,1513228676.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:57.233Z,1513228677.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:57.274Z,1513228677.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:57.626Z,1513228677.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:57.648Z,1513228677.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:58.019Z,1513228678.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:58.133Z,1513228678.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:58.438Z,1513228678.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:58.472Z,1513228678.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:58.811Z,1513228678.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:58.879Z,1513228678.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:59.208Z,1513228679.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:59.256Z,1513228679.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:17:59.638Z,1513228679.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:17:59.658Z,1513228679.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:00.039Z,1513228680.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:00.054Z,1513228680.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:00.431Z,1513228680.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:00.459Z,1513228680.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:00.801Z,1513228680.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:00.816Z,1513228680.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:01.212Z,1513228681.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:01.254Z,1513228681.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:01.634Z,1513228681.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:01.666Z,1513228681.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:02.012Z,1513228682.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:02.043Z,1513228682.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:02.413Z,1513228682.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:02.448Z,1513228682.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:02.827Z,1513228682.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:02.857Z,1513228682.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:03.226Z,1513228683.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:03.252Z,1513228683.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:06.668Z,1513228686.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:06.746Z,1513228686.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:06.827Z,1513228686.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:06.874Z,1513228686.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:07.202Z,1513228687.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:07.256Z,1513228687.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:07.609Z,1513228687.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:07.650Z,1513228687.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:08.032Z,1513228688.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:08.055Z,1513228688.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:08.400Z,1513228688.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:08.435Z,1513228688.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:08.818Z,1513228688.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:08.834Z,1513228688.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:09.217Z,1513228689.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:09.240Z,1513228689.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:09.615Z,1513228689.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:09.636Z,1513228689.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:09.995Z,1513228689.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:10.039Z,1513228690.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:10.389Z,1513228690.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:10.423Z,1513228690.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:10.791Z,1513228690.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:10.823Z,1513228690.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:11.245Z,1513228691.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:11.281Z,1513228691.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:11.610Z,1513228691.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:11.652Z,1513228691.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:12.017Z,1513228692.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:12.045Z,1513228692.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:12.416Z,1513228692.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:12.438Z,1513228692.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:12.791Z,1513228692.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:12.834Z,1513228692.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:13.191Z,1513228693.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:13.222Z,1513228693.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:13.599Z,1513228693.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:13.626Z,1513228693.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:13.992Z,1513228693.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:14.023Z,1513228694.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:14.419Z,1513228694.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:14.444Z,1513228694.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:14.830Z,1513228694.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:14.863Z,1513228694.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:15.210Z,1513228695.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:15.233Z,1513228695.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:15.609Z,1513228695.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:15.643Z,1513228695.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:15.999Z,1513228695.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:16.045Z,1513228696.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:16.402Z,1513228696.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:16.417Z,1513228696.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:16.852Z,1513228696.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:16.899Z,1513228696.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:17.203Z,1513228697.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:17.244Z,1513228697.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:17.668Z,1513228697.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:17.695Z,1513228697.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:18.010Z,1513228698.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:18.056Z,1513228698.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:18.413Z,1513228698.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:18.428Z,1513228698.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:18.802Z,1513228698.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:18.816Z,1513228698.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:19.205Z,1513228699.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:19.270Z,1513228699.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:19.602Z,1513228699.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:19.665Z,1513228699.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:19.996Z,1513228699.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:20.026Z,1513228700.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:20.395Z,1513228700.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:20.422Z,1513228700.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:20.811Z,1513228700.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:20.883Z,1513228700.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:21.210Z,1513228701.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:21.236Z,1513228701.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:21.603Z,1513228701.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:21.665Z,1513228701.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:21.995Z,1513228701.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:22.038Z,1513228702.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:22.399Z,1513228702.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:22.443Z,1513228702.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:22.800Z,1513228702.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:22.828Z,1513228702.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:23.198Z,1513228703.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:23.225Z,1513228703.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:23.606Z,1513228703.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:23.641Z,1513228703.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:24.040Z,1513228704.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:24.103Z,1513228704.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:24.402Z,1513228704.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:24.439Z,1513228704.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:24.798Z,1513228704.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:24.815Z,1513228704.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:25.202Z,1513228705.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:25.217Z,1513228705.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:25.598Z,1513228705.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:25.625Z,1513228705.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:26.006Z,1513228706.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:26.020Z,1513228706.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:26.402Z,1513228706.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:26.416Z,1513228706.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:26.817Z,1513228706.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:26.838Z,1513228706.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:27.226Z,1513228707.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:27.261Z,1513228707.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:27.610Z,1513228707.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:27.643Z,1513228707.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:27.985Z,1513228707.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:28.019Z,1513228708.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:28.396Z,1513228708.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:28.437Z,1513228708.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:28.793Z,1513228708.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:28.838Z,1513228708.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:29.206Z,1513228709.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:29.230Z,1513228709.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:29.620Z,1513228709.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:29.642Z,1513228709.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:30.013Z,1513228710.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:30.071Z,1513228710.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:30.439Z,1513228710.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:30.474Z,1513228710.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:30.802Z,1513228710.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:30.839Z,1513228710.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:31.204Z,1513228711.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:31.246Z,1513228711.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:31.596Z,1513228711.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:31.611Z,1513228711.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:31.998Z,1513228711.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:32.014Z,1513228712.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:32.401Z,1513228712.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:32.415Z,1513228712.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:32.805Z,1513228712.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:32.820Z,1513228712.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:33.210Z,1513228713.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:33.227Z,1513228713.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:33.626Z,1513228713.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:33.663Z,1513228713.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:33.991Z,1513228713.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:34.024Z,1513228714.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:34.403Z,1513228714.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:34.423Z,1513228714.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:34.791Z,1513228714.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:34.832Z,1513228714.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:35.204Z,1513228715.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:35.225Z,1513228715.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:35.616Z,1513228715.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:35.635Z,1513228715.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:36.015Z,1513228716.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:36.037Z,1513228716.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:36.406Z,1513228716.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:36.422Z,1513228716.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:36.814Z,1513228716.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:36.865Z,1513228716.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:37.191Z,1513228717.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:37.231Z,1513228717.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:37.592Z,1513228717.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:37.606Z,1513228717.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:37.000Z,1513228718.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:38.039Z,1513228718.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:38.039Z,1513228718.039 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2017-12-14T05:18:38.039Z,1513228718.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:18:38.045Z,1513228718.045 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:38.045Z,1513228718.045 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2017-12-14T05:18:38.045Z,1513228718.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:18:38.047Z,1513228718.047 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:38.047Z,1513228718.047 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2017-12-14T05:18:38.047Z,1513228718.047 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:18:38.072Z,1513228718.072 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:18:38.072Z,1513228718.072 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:18:38.077Z,1513228718.077 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:18:38.399Z,1513228718.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:38.444Z,1513228718.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:18:38.444Z,1513228718.444 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2017-12-14T05:18:38.444Z,1513228718.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:18:38.444Z,1513228718.444 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2017-12-14T05:18:38.445Z,1513228718.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:18:38.445Z,1513228718.445 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2017-12-14T05:18:38.805Z,1513228718.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:38.819Z,1513228718.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:18:38.819Z,1513228718.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:18:38.820Z,1513228718.820 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:18:38.820Z,1513228718.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:18:38.820Z,1513228718.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:18:38.821Z,1513228718.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:18:38.821Z,1513228718.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:18:38.822Z,1513228718.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:18:38.822Z,1513228718.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:18:39.210Z,1513228719.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:39.244Z,1513228719.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:39.615Z,1513228719.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:39.638Z,1513228719.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:40.019Z,1513228720.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:40.079Z,1513228720.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:40.391Z,1513228720.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:40.430Z,1513228720.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:40.792Z,1513228720.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:40.826Z,1513228720.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:41.192Z,1513228721.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:41.219Z,1513228721.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:41.602Z,1513228721.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:41.643Z,1513228721.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:42.021Z,1513228722.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:42.117Z,1513228722.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:42.402Z,1513228722.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:42.423Z,1513228722.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:42.796Z,1513228722.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:42.811Z,1513228722.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:43.247Z,1513228723.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:43.303Z,1513228723.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:43.600Z,1513228723.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:43.623Z,1513228723.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:44.005Z,1513228724.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:44.057Z,1513228724.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:44.405Z,1513228724.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:44.419Z,1513228724.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:44.806Z,1513228724.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:44.827Z,1513228724.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:45.239Z,1513228725.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:45.262Z,1513228725.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:45.606Z,1513228725.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:45.620Z,1513228725.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:46.001Z,1513228726.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:46.016Z,1513228726.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:46.423Z,1513228726.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:46.467Z,1513228726.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:46.801Z,1513228726.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:46.851Z,1513228726.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:47.200Z,1513228727.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:47.216Z,1513228727.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:47.606Z,1513228727.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:47.620Z,1513228727.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:48.010Z,1513228728.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:48.032Z,1513228728.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:48.410Z,1513228728.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:48.424Z,1513228728.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:48.810Z,1513228728.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:48.824Z,1513228728.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:49.195Z,1513228729.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:49.235Z,1513228729.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:49.631Z,1513228729.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:49.682Z,1513228729.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:50.004Z,1513228730.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:50.035Z,1513228730.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:50.391Z,1513228730.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:50.416Z,1513228730.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:50.814Z,1513228730.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:50.835Z,1513228730.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:51.217Z,1513228731.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:51.237Z,1513228731.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:51.614Z,1513228731.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:51.664Z,1513228731.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:51.995Z,1513228731.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:52.026Z,1513228732.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:52.395Z,1513228732.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:52.464Z,1513228732.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:52.834Z,1513228732.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:52.874Z,1513228732.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:53.217Z,1513228733.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:53.262Z,1513228733.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:53.616Z,1513228733.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:53.631Z,1513228733.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:54.018Z,1513228734.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:54.041Z,1513228734.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:54.416Z,1513228734.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:54.437Z,1513228734.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:54.808Z,1513228734.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:54.843Z,1513228734.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:55.196Z,1513228735.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:55.231Z,1513228735.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:55.596Z,1513228735.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:55.623Z,1513228735.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:56.026Z,1513228736.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:56.062Z,1513228736.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:56.391Z,1513228736.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:56.428Z,1513228736.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:56.810Z,1513228736.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:56.848Z,1513228736.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:57.214Z,1513228737.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:57.244Z,1513228737.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:57.620Z,1513228737.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:57.643Z,1513228737.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:57.000Z,1513228738.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:58.027Z,1513228738.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:58.390Z,1513228738.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:58.414Z,1513228738.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:58.796Z,1513228738.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:58.811Z,1513228738.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:59.216Z,1513228739.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:59.253Z,1513228739.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:18:59.618Z,1513228739.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:18:59.664Z,1513228739.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:00.015Z,1513228740.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:00.043Z,1513228740.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:00.415Z,1513228740.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:00.438Z,1513228740.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:00.791Z,1513228740.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:00.835Z,1513228740.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:01.207Z,1513228741.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:01.229Z,1513228741.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:01.598Z,1513228741.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:01.630Z,1513228741.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:02.001Z,1513228742.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:02.037Z,1513228742.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:02.440Z,1513228742.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:02.480Z,1513228742.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:02.492Z,1513228742.492 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:14:02.0Z
2017-12-14T05:19:02.492Z,1513228742.492 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T05:19:02.492Z,1513228742.492 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T05:19:02.813Z,1513228742.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:02.843Z,1513228742.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:03.871Z,1513228743.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:03.899Z,1513228743.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:04.010Z,1513228744.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:04.068Z,1513228744.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:07.452Z,1513228747.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:07.518Z,1513228747.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:07.550Z,1513228747.550 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:19:07.590Z,1513228747.590 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0112.lzma
2017-12-14T05:19:07.623Z,1513228747.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:07.663Z,1513228747.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:08.001Z,1513228748.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:08.024Z,1513228748.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:08.363Z,1513228748.363 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0112.lzma.bak
2017-12-14T05:19:08.363Z,1513228748.363 [DataOverHttps](INFO): SBD MOMSN=5437840
2017-12-14T05:19:08.412Z,1513228748.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:08.451Z,1513228748.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:09.699Z,1513228749.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:09.723Z,1513228749.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:09.820Z,1513228749.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:09.885Z,1513228749.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:13.296Z,1513228753.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:13.311Z,1513228753.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:13.404Z,1513228753.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:13.444Z,1513228753.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:13.802Z,1513228753.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:13.823Z,1513228753.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:14.203Z,1513228754.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:14.224Z,1513228754.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:14.602Z,1513228754.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:14.617Z,1513228754.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:14.980Z,1513228754.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:15.014Z,1513228755.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:18.563Z,1513228758.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:18.611Z,1513228758.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:18.717Z,1513228758.717 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0113.lzma
2017-12-14T05:19:18.764Z,1513228758.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:18.807Z,1513228758.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:19.086Z,1513228759.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:19.107Z,1513228759.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:19.516Z,1513228759.516 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0113.lzma.bak
2017-12-14T05:19:19.516Z,1513228759.516 [DataOverHttps](INFO): SBD MOMSN=5437852
2017-12-14T05:19:19.577Z,1513228759.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:19.601Z,1513228759.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:40.802Z,1513228780.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:40.816Z,1513228780.816 [BPC1](ERROR): Failed to receive battery data
2017-12-14T05:19:40.817Z,1513228780.817 [BPC1] Communications Fault, FailCount= 1
2017-12-14T05:19:40.817Z,1513228780.817 [BPC1](ERROR): Communications Fault
2017-12-14T05:19:40.830Z,1513228780.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:40.862Z,1513228780.862 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T05:19:40.862Z,1513228780.862 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T05:19:40.862Z,1513228780.862 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T05:19:40.880Z,1513228780.880 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T05:19:40.940Z,1513228780.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:40.968Z,1513228780.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:44.477Z,1513228784.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:44.493Z,1513228784.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:44.595Z,1513228784.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:44.699Z,1513228784.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:44.737Z,1513228784.737 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:19:44.737Z,1513228784.737 [BPC1] No Fault, FailCount= 1
2017-12-14T05:19:44.961Z,1513228784.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:45.043Z,1513228785.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:45.361Z,1513228785.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:45.393Z,1513228785.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:45.757Z,1513228785.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:45.772Z,1513228785.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:46.150Z,1513228786.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:46.164Z,1513228786.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:46.584Z,1513228786.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:46.714Z,1513228786.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:46.939Z,1513228786.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:46.977Z,1513228786.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:47.339Z,1513228787.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:47.379Z,1513228787.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:47.767Z,1513228787.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:47.782Z,1513228787.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:48.168Z,1513228788.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:48.182Z,1513228788.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:48.562Z,1513228788.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:48.583Z,1513228788.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:48.940Z,1513228788.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:48.959Z,1513228788.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:49.347Z,1513228789.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:49.383Z,1513228789.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:49.745Z,1513228789.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:49.760Z,1513228789.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:50.148Z,1513228790.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:50.162Z,1513228790.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:50.550Z,1513228790.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:50.564Z,1513228790.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:50.965Z,1513228790.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:50.991Z,1513228790.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:51.358Z,1513228791.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:51.392Z,1513228791.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:51.740Z,1513228791.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:51.759Z,1513228791.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:52.150Z,1513228792.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:52.164Z,1513228792.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:52.550Z,1513228792.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:52.564Z,1513228792.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:53.008Z,1513228793.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:53.110Z,1513228793.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:53.354Z,1513228793.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:53.369Z,1513228793.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:53.806Z,1513228793.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:53.821Z,1513228793.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:54.157Z,1513228794.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:54.174Z,1513228794.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:54.557Z,1513228794.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:54.572Z,1513228794.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:54.956Z,1513228794.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:55.053Z,1513228795.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:55.339Z,1513228795.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:55.371Z,1513228795.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:55.742Z,1513228795.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:55.769Z,1513228795.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:56.140Z,1513228796.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:56.179Z,1513228796.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:56.546Z,1513228796.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:56.580Z,1513228796.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:56.972Z,1513228796.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:56.988Z,1513228796.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:57.361Z,1513228797.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:57.383Z,1513228797.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:57.736Z,1513228797.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:57.775Z,1513228797.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:58.147Z,1513228798.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:58.173Z,1513228798.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:58.540Z,1513228798.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:58.576Z,1513228798.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:58.978Z,1513228798.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:58.999Z,1513228798.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:59.340Z,1513228799.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:59.356Z,1513228799.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:19:59.754Z,1513228799.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:19:59.771Z,1513228799.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:00.186Z,1513228800.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:00.216Z,1513228800.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:00.558Z,1513228800.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:00.579Z,1513228800.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:00.939Z,1513228800.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:00.976Z,1513228800.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:01.339Z,1513228801.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:01.372Z,1513228801.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:01.741Z,1513228801.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:01.777Z,1513228801.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:02.140Z,1513228802.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:02.176Z,1513228802.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:02.551Z,1513228802.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:02.584Z,1513228802.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:02.986Z,1513228802.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:03.017Z,1513228803.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:03.369Z,1513228803.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:03.401Z,1513228803.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:03.751Z,1513228803.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:03.767Z,1513228803.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:04.148Z,1513228804.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:04.163Z,1513228804.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:04.548Z,1513228804.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:04.567Z,1513228804.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:04.959Z,1513228804.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:05.022Z,1513228805.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:05.347Z,1513228805.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:05.412Z,1513228805.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:05.765Z,1513228805.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:05.781Z,1513228805.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:06.164Z,1513228806.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:06.235Z,1513228806.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:06.559Z,1513228806.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:06.579Z,1513228806.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:06.940Z,1513228806.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:07.053Z,1513228807.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:07.344Z,1513228807.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:07.375Z,1513228807.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:07.740Z,1513228807.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:07.776Z,1513228807.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:08.139Z,1513228808.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:08.174Z,1513228808.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:08.549Z,1513228808.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:08.579Z,1513228808.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:08.991Z,1513228808.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:09.078Z,1513228809.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:09.366Z,1513228809.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:09.421Z,1513228809.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:09.739Z,1513228809.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:09.767Z,1513228809.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:10.139Z,1513228810.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:10.164Z,1513228810.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:10.539Z,1513228810.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:10.564Z,1513228810.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:10.956Z,1513228810.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:10.991Z,1513228810.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:11.355Z,1513228811.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:11.386Z,1513228811.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:11.760Z,1513228811.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:11.792Z,1513228811.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:12.149Z,1513228812.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:12.171Z,1513228812.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:12.577Z,1513228812.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:12.601Z,1513228812.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:12.948Z,1513228812.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:12.967Z,1513228812.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:13.346Z,1513228813.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:13.368Z,1513228813.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:13.761Z,1513228813.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:13.776Z,1513228813.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:14.152Z,1513228814.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:14.167Z,1513228814.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:14.557Z,1513228814.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:14.613Z,1513228814.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:14.977Z,1513228814.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:15.027Z,1513228815.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:15.358Z,1513228815.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:15.375Z,1513228815.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:15.754Z,1513228815.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:15.769Z,1513228815.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:16.139Z,1513228816.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:16.167Z,1513228816.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:16.552Z,1513228816.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:16.566Z,1513228816.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:16.940Z,1513228816.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:16.965Z,1513228816.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:17.339Z,1513228817.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:17.375Z,1513228817.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:17.766Z,1513228817.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:17.781Z,1513228817.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:18.158Z,1513228818.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:18.178Z,1513228818.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:18.555Z,1513228818.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:18.571Z,1513228818.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:18.939Z,1513228818.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:19.026Z,1513228819.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:19.339Z,1513228819.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:19.364Z,1513228819.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:19.740Z,1513228819.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:19.775Z,1513228819.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:20.144Z,1513228820.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:20.176Z,1513228820.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:20.551Z,1513228820.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:20.578Z,1513228820.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:20.993Z,1513228820.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:21.075Z,1513228821.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:21.363Z,1513228821.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:21.378Z,1513228821.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:21.742Z,1513228821.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:21.756Z,1513228821.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:22.158Z,1513228822.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:22.194Z,1513228822.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:22.554Z,1513228822.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:22.587Z,1513228822.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:22.941Z,1513228822.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:22.957Z,1513228822.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:23.342Z,1513228823.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:23.371Z,1513228823.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:23.761Z,1513228823.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:23.776Z,1513228823.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:24.162Z,1513228824.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:24.183Z,1513228824.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:24.562Z,1513228824.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:24.579Z,1513228824.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:24.948Z,1513228824.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:24.975Z,1513228824.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:25.385Z,1513228825.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:25.427Z,1513228825.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:25.745Z,1513228825.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:25.814Z,1513228825.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:26.142Z,1513228826.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:26.157Z,1513228826.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:26.558Z,1513228826.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:26.583Z,1513228826.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:26.961Z,1513228826.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:27.016Z,1513228827.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:27.358Z,1513228827.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:27.412Z,1513228827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:27.742Z,1513228827.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:27.758Z,1513228827.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:28.145Z,1513228828.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:28.203Z,1513228828.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:28.605Z,1513228828.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:28.696Z,1513228828.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:28.940Z,1513228828.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:29.006Z,1513228829.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:29.340Z,1513228829.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:29.375Z,1513228829.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:29.768Z,1513228829.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:29.783Z,1513228829.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:30.168Z,1513228830.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:30.191Z,1513228830.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:30.550Z,1513228830.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:30.587Z,1513228830.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:30.956Z,1513228830.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:30.982Z,1513228830.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:31.346Z,1513228831.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:31.373Z,1513228831.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:31.747Z,1513228831.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:31.763Z,1513228831.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:32.153Z,1513228832.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:32.202Z,1513228832.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:32.556Z,1513228832.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:32.571Z,1513228832.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:32.956Z,1513228832.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:32.976Z,1513228832.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:33.357Z,1513228833.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:33.380Z,1513228833.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:33.741Z,1513228833.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:33.764Z,1513228833.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:34.148Z,1513228834.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:34.162Z,1513228834.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:34.550Z,1513228834.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:34.564Z,1513228834.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:35.075Z,1513228835.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:35.115Z,1513228835.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:35.358Z,1513228835.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:35.374Z,1513228835.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:35.762Z,1513228835.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:35.851Z,1513228835.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:36.166Z,1513228836.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:36.180Z,1513228836.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:36.566Z,1513228836.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:36.581Z,1513228836.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:36.944Z,1513228836.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:37.037Z,1513228837.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:37.339Z,1513228837.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:37.384Z,1513228837.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:37.740Z,1513228837.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:37.820Z,1513228837.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:38.143Z,1513228838.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:38.182Z,1513228838.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:38.246Z,1513228838.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:38.549Z,1513228838.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:38.579Z,1513228838.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:38.962Z,1513228838.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:38.991Z,1513228838.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:39.042Z,1513228839.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:39.363Z,1513228839.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:39.389Z,1513228839.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:39.445Z,1513228839.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:39.740Z,1513228839.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:39.763Z,1513228839.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:40.143Z,1513228840.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:40.157Z,1513228840.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:40.241Z,1513228840.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:40.547Z,1513228840.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:40.597Z,1513228840.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:40.945Z,1513228840.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:40.968Z,1513228840.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:41.037Z,1513228841.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:41.364Z,1513228841.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:41.407Z,1513228841.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:41.833Z,1513228841.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:42.630Z,1513228842.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:43.037Z,1513228843.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:43.441Z,1513228843.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:44.237Z,1513228844.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:45.073Z,1513228845.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:45.088Z,1513228845.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:45.214Z,1513228845.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:45.265Z,1513228845.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:45.590Z,1513228845.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:45.620Z,1513228845.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:45.978Z,1513228845.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:46.017Z,1513228846.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:46.375Z,1513228846.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:46.395Z,1513228846.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:46.779Z,1513228846.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:46.827Z,1513228846.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:47.174Z,1513228847.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:47.199Z,1513228847.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:47.586Z,1513228847.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:47.602Z,1513228847.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:48.009Z,1513228848.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:48.051Z,1513228848.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:48.388Z,1513228848.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:48.431Z,1513228848.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:48.776Z,1513228848.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:48.792Z,1513228848.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:49.192Z,1513228849.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:49.295Z,1513228849.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:49.584Z,1513228849.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:49.600Z,1513228849.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:49.980Z,1513228849.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:49.998Z,1513228849.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:50.384Z,1513228850.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:50.446Z,1513228850.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:50.786Z,1513228850.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:50.802Z,1513228850.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:51.211Z,1513228851.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:51.280Z,1513228851.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:51.599Z,1513228851.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:51.687Z,1513228851.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:51.983Z,1513228851.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:52.010Z,1513228852.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:52.265Z,1513228852.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:52.366Z,1513228852.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:52.397Z,1513228852.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:52.789Z,1513228852.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:52.804Z,1513228852.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:53.061Z,1513228853.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:53.190Z,1513228853.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:53.205Z,1513228853.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:53.467Z,1513228853.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:53.590Z,1513228853.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:53.611Z,1513228853.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:53.992Z,1513228853.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:54.008Z,1513228854.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:54.261Z,1513228854.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:54.390Z,1513228854.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:54.404Z,1513228854.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:54.767Z,1513228854.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:54.793Z,1513228854.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:55.058Z,1513228855.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:55.176Z,1513228855.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:55.203Z,1513228855.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:55.461Z,1513228855.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:55.576Z,1513228855.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:55.590Z,1513228855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:55.976Z,1513228855.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:55.991Z,1513228855.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:56.259Z,1513228856.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:56.380Z,1513228856.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:56.396Z,1513228856.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:56.781Z,1513228856.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:56.796Z,1513228856.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:57.053Z,1513228857.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:57.216Z,1513228857.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:57.251Z,1513228857.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:57.457Z,1513228857.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:57.590Z,1513228857.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:57.633Z,1513228857.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:57.984Z,1513228857.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:57.999Z,1513228857.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:58.253Z,1513228858.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:58.371Z,1513228858.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:58.387Z,1513228858.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:58.787Z,1513228858.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:58.807Z,1513228858.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:59.049Z,1513228859.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:59.180Z,1513228859.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:59.204Z,1513228859.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:59.453Z,1513228859.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:59.582Z,1513228859.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:20:59.634Z,1513228859.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:20:59.994Z,1513228859.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:00.009Z,1513228860.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:00.250Z,1513228860.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:00.404Z,1513228860.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:00.447Z,1513228860.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:00.784Z,1513228860.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:00.809Z,1513228860.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:01.045Z,1513228861.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:01.184Z,1513228861.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:01.199Z,1513228861.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:01.449Z,1513228861.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:01.584Z,1513228861.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:01.599Z,1513228861.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:01.984Z,1513228861.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:01.999Z,1513228861.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:02.385Z,1513228862.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:02.399Z,1513228862.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:02.795Z,1513228862.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:02.810Z,1513228862.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:03.198Z,1513228863.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:03.219Z,1513228863.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:03.614Z,1513228863.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:03.657Z,1513228863.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:03.979Z,1513228863.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:04.006Z,1513228864.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:04.241Z,1513228864.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:04.365Z,1513228864.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:04.380Z,1513228864.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:04.772Z,1513228864.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:04.803Z,1513228864.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:05.038Z,1513228865.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:05.179Z,1513228865.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:05.214Z,1513228865.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:05.441Z,1513228865.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:05.583Z,1513228865.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:05.625Z,1513228865.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:05.994Z,1513228865.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:06.027Z,1513228866.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:06.237Z,1513228866.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:06.393Z,1513228866.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:06.419Z,1513228866.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:06.775Z,1513228866.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:06.834Z,1513228866.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:07.033Z,1513228867.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:07.183Z,1513228867.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:07.223Z,1513228867.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:07.437Z,1513228867.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:07.596Z,1513228867.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:07.627Z,1513228867.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:07.980Z,1513228867.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:07.996Z,1513228867.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:08.234Z,1513228868.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:08.376Z,1513228868.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:08.391Z,1513228868.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:08.797Z,1513228868.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:08.836Z,1513228868.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:09.029Z,1513228869.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:09.193Z,1513228869.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:09.224Z,1513228869.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:09.433Z,1513228869.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:09.590Z,1513228869.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:09.604Z,1513228869.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:09.990Z,1513228869.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:10.033Z,1513228870.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:10.230Z,1513228870.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:10.384Z,1513228870.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:10.401Z,1513228870.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:10.787Z,1513228870.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:10.810Z,1513228870.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:11.025Z,1513228871.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:11.185Z,1513228871.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:11.200Z,1513228871.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:11.429Z,1513228871.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:11.590Z,1513228871.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:11.671Z,1513228871.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:11.000Z,1513228872.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:12.021Z,1513228872.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:12.226Z,1513228872.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:12.399Z,1513228872.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:12.446Z,1513228872.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:12.779Z,1513228872.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:12.804Z,1513228872.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:13.022Z,1513228873.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:13.221Z,1513228873.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:13.302Z,1513228873.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:13.425Z,1513228873.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:13.575Z,1513228873.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:13.605Z,1513228873.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:13.973Z,1513228873.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:14.004Z,1513228874.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:14.222Z,1513228874.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:14.379Z,1513228874.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:14.409Z,1513228874.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:14.796Z,1513228874.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:14.812Z,1513228874.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:15.017Z,1513228875.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:15.185Z,1513228875.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:15.211Z,1513228875.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:15.421Z,1513228875.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:15.594Z,1513228875.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:15.609Z,1513228875.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:15.979Z,1513228875.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:16.010Z,1513228876.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:16.217Z,1513228876.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:16.368Z,1513228876.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:16.435Z,1513228876.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:16.777Z,1513228876.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:16.792Z,1513228876.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:17.015Z,1513228877.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:17.183Z,1513228877.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:17.215Z,1513228877.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:17.429Z,1513228877.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:17.576Z,1513228877.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:17.603Z,1513228877.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:17.985Z,1513228877.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:17.000Z,1513228878.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:18.225Z,1513228878.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:18.389Z,1513228878.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:18.411Z,1513228878.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:18.770Z,1513228878.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:18.792Z,1513228878.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:19.022Z,1513228879.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:19.184Z,1513228879.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:19.199Z,1513228879.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:19.437Z,1513228879.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:19.585Z,1513228879.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:19.599Z,1513228879.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:19.974Z,1513228879.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:20.015Z,1513228880.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:20.234Z,1513228880.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:20.377Z,1513228880.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:20.411Z,1513228880.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:20.807Z,1513228880.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:20.821Z,1513228880.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:21.030Z,1513228881.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:21.195Z,1513228881.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:21.245Z,1513228881.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:21.434Z,1513228881.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:21.589Z,1513228881.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:21.667Z,1513228881.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:21.985Z,1513228881.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:22.054Z,1513228882.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:22.230Z,1513228882.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:22.384Z,1513228882.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:22.403Z,1513228882.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:22.807Z,1513228882.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:22.850Z,1513228882.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:23.026Z,1513228883.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:23.194Z,1513228883.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:23.244Z,1513228883.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:23.429Z,1513228883.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:23.590Z,1513228883.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:23.614Z,1513228883.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:24.012Z,1513228884.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:24.063Z,1513228884.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:24.226Z,1513228884.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:24.392Z,1513228884.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:24.434Z,1513228884.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:24.779Z,1513228884.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:24.829Z,1513228884.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:25.023Z,1513228885.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:25.188Z,1513228885.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:25.220Z,1513228885.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:25.426Z,1513228885.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:25.580Z,1513228885.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:25.600Z,1513228885.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:25.988Z,1513228885.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:26.016Z,1513228886.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:26.223Z,1513228886.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:26.381Z,1513228886.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:26.449Z,1513228886.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:26.779Z,1513228886.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:26.851Z,1513228886.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:27.018Z,1513228887.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:27.208Z,1513228887.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:27.223Z,1513228887.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:27.421Z,1513228887.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:27.601Z,1513228887.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:27.617Z,1513228887.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:27.972Z,1513228887.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:27.987Z,1513228887.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:28.217Z,1513228888.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:28.403Z,1513228888.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:28.419Z,1513228888.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:28.791Z,1513228888.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:28.836Z,1513228888.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:29.014Z,1513228889.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:29.204Z,1513228889.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:29.235Z,1513228889.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:29.421Z,1513228889.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:29.627Z,1513228889.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:29.647Z,1513228889.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:30.028Z,1513228890.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:30.070Z,1513228890.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:30.389Z,1513228890.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:30.427Z,1513228890.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:30.778Z,1513228890.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:30.840Z,1513228890.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:31.182Z,1513228891.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:31.197Z,1513228891.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:31.581Z,1513228891.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:31.630Z,1513228891.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:31.995Z,1513228891.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:32.048Z,1513228892.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:32.218Z,1513228892.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:32.390Z,1513228892.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:32.446Z,1513228892.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:32.819Z,1513228892.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:32.860Z,1513228892.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:33.015Z,1513228893.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:33.199Z,1513228893.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:33.267Z,1513228893.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:33.446Z,1513228893.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:33.597Z,1513228893.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:33.663Z,1513228893.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:33.982Z,1513228893.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:34.051Z,1513228894.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:34.242Z,1513228894.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:34.367Z,1513228894.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:34.396Z,1513228894.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:34.794Z,1513228894.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:34.876Z,1513228894.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:35.038Z,1513228895.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:35.178Z,1513228895.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:35.201Z,1513228895.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:35.441Z,1513228895.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:35.590Z,1513228895.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:35.646Z,1513228895.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:36.003Z,1513228896.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:36.063Z,1513228896.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:36.238Z,1513228896.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:36.404Z,1513228896.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:36.458Z,1513228896.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:36.768Z,1513228896.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:36.804Z,1513228896.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:37.034Z,1513228897.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:37.196Z,1513228897.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:37.220Z,1513228897.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:37.438Z,1513228897.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:37.581Z,1513228897.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:37.635Z,1513228897.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:37.970Z,1513228897.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:37.988Z,1513228897.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:38.234Z,1513228898.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:38.397Z,1513228898.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:38.424Z,1513228898.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:38.787Z,1513228898.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:38.844Z,1513228898.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:38.845Z,1513228898.845 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2017-12-14T05:21:38.845Z,1513228898.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:21:38.887Z,1513228898.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:38.887Z,1513228898.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2017-12-14T05:21:38.887Z,1513228898.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:21:38.895Z,1513228898.895 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:38.895Z,1513228898.895 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2017-12-14T05:21:38.895Z,1513228898.895 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:21:38.946Z,1513228898.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:21:38.946Z,1513228898.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:21:38.946Z,1513228898.946 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:21:39.030Z,1513228899.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:39.200Z,1513228899.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:39.278Z,1513228899.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:21:39.278Z,1513228899.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2017-12-14T05:21:39.278Z,1513228899.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:21:39.278Z,1513228899.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2017-12-14T05:21:39.279Z,1513228899.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:21:39.279Z,1513228899.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2017-12-14T05:21:39.434Z,1513228899.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:39.637Z,1513228899.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:39.704Z,1513228899.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:21:39.709Z,1513228899.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:21:39.709Z,1513228899.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:21:39.710Z,1513228899.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:21:39.710Z,1513228899.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:21:39.711Z,1513228899.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:21:39.711Z,1513228899.711 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:21:39.711Z,1513228899.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:21:39.712Z,1513228899.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:21:39.975Z,1513228899.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:40.022Z,1513228900.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:40.230Z,1513228900.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:40.379Z,1513228900.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:40.430Z,1513228900.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:40.781Z,1513228900.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:40.796Z,1513228900.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:41.026Z,1513228901.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:41.187Z,1513228901.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:41.230Z,1513228901.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:41.429Z,1513228901.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:41.587Z,1513228901.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:41.607Z,1513228901.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:42.226Z,1513228902.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:43.022Z,1513228903.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:43.425Z,1513228903.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:44.221Z,1513228904.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:45.018Z,1513228905.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:45.445Z,1513228905.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:45.638Z,1513228905.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:45.692Z,1513228905.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:45.802Z,1513228905.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:45.832Z,1513228905.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:46.146Z,1513228906.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:46.194Z,1513228906.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:46.242Z,1513228906.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:46.553Z,1513228906.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:46.588Z,1513228906.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:46.946Z,1513228906.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:47.029Z,1513228907.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:47.038Z,1513228907.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:47.351Z,1513228907.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:47.366Z,1513228907.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:47.445Z,1513228907.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:47.761Z,1513228907.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:47.776Z,1513228907.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:48.163Z,1513228908.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:48.197Z,1513228908.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:48.242Z,1513228908.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:48.551Z,1513228908.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:48.565Z,1513228908.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:48.949Z,1513228908.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:48.971Z,1513228908.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:49.037Z,1513228909.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:49.351Z,1513228909.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:49.387Z,1513228909.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:49.442Z,1513228909.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:49.760Z,1513228909.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:49.776Z,1513228909.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:50.154Z,1513228910.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:50.169Z,1513228910.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:50.237Z,1513228910.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:50.557Z,1513228910.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:50.576Z,1513228910.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:50.972Z,1513228910.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:50.995Z,1513228910.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:51.034Z,1513228911.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:51.363Z,1513228911.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:51.383Z,1513228911.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:51.437Z,1513228911.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:51.739Z,1513228911.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:51.765Z,1513228911.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:52.140Z,1513228912.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:52.179Z,1513228912.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:52.234Z,1513228912.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:52.572Z,1513228912.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:52.599Z,1513228912.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:52.961Z,1513228912.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:52.976Z,1513228912.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:53.029Z,1513228913.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:53.351Z,1513228913.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:53.366Z,1513228913.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:53.433Z,1513228913.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:53.754Z,1513228913.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:53.769Z,1513228913.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:54.154Z,1513228914.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:54.169Z,1513228914.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:54.231Z,1513228914.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:54.566Z,1513228914.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:54.598Z,1513228914.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:54.959Z,1513228914.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:54.974Z,1513228914.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:55.057Z,1513228915.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:55.358Z,1513228915.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:55.374Z,1513228915.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:55.462Z,1513228915.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:55.743Z,1513228915.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:55.765Z,1513228915.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:56.139Z,1513228916.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:56.173Z,1513228916.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:56.257Z,1513228916.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:56.563Z,1513228916.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:56.583Z,1513228916.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:56.964Z,1513228916.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:56.987Z,1513228916.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:57.053Z,1513228917.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:57.362Z,1513228917.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:57.383Z,1513228917.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:57.457Z,1513228917.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:57.792Z,1513228917.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:57.882Z,1513228917.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:58.143Z,1513228918.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:58.178Z,1513228918.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:58.254Z,1513228918.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:58.539Z,1513228918.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:58.591Z,1513228918.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:58.998Z,1513228918.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:59.049Z,1513228919.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:59.060Z,1513228919.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:59.360Z,1513228919.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:59.411Z,1513228919.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:21:59.453Z,1513228919.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:59.761Z,1513228919.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:21:59.776Z,1513228919.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:00.160Z,1513228920.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:00.175Z,1513228920.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:00.250Z,1513228920.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:00.558Z,1513228920.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:00.573Z,1513228920.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:00.953Z,1513228920.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:01.036Z,1513228921.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:01.046Z,1513228921.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:01.385Z,1513228921.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:01.400Z,1513228921.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:01.449Z,1513228921.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:01.743Z,1513228921.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:01.775Z,1513228921.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:02.143Z,1513228922.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:02.177Z,1513228922.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:02.246Z,1513228922.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:02.550Z,1513228922.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:02.564Z,1513228922.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:02.962Z,1513228922.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:02.985Z,1513228922.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:03.042Z,1513228923.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:03.356Z,1513228923.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:03.398Z,1513228923.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:03.445Z,1513228923.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:03.746Z,1513228923.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:03.760Z,1513228923.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:04.148Z,1513228924.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:04.164Z,1513228924.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:04.242Z,1513228924.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:04.548Z,1513228924.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:04.562Z,1513228924.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:04.956Z,1513228924.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:04.971Z,1513228924.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:05.037Z,1513228925.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:05.368Z,1513228925.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:05.400Z,1513228925.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:05.442Z,1513228925.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:05.774Z,1513228925.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:05.789Z,1513228925.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:06.163Z,1513228926.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:06.178Z,1513228926.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:06.239Z,1513228926.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:06.558Z,1513228926.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:06.573Z,1513228926.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:06.945Z,1513228926.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:06.980Z,1513228926.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:07.033Z,1513228927.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:07.347Z,1513228927.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:07.380Z,1513228927.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:07.437Z,1513228927.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:07.748Z,1513228927.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:07.799Z,1513228927.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:08.144Z,1513228928.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:08.158Z,1513228928.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:08.234Z,1513228928.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:08.600Z,1513228928.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:08.714Z,1513228928.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:08.969Z,1513228928.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:08.984Z,1513228928.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:09.030Z,1513228929.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:09.366Z,1513228929.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:09.382Z,1513228929.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:09.433Z,1513228929.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:09.739Z,1513228929.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:09.764Z,1513228929.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:10.139Z,1513228930.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:10.171Z,1513228930.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:10.230Z,1513228930.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:10.557Z,1513228930.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:10.571Z,1513228930.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:10.940Z,1513228930.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:10.966Z,1513228930.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:11.025Z,1513228931.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:11.360Z,1513228931.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:11.375Z,1513228931.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:11.429Z,1513228931.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:11.759Z,1513228931.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:11.785Z,1513228931.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:12.158Z,1513228932.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:12.172Z,1513228932.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:12.226Z,1513228932.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:12.557Z,1513228932.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:12.572Z,1513228932.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:12.940Z,1513228932.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:13.022Z,1513228933.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:13.047Z,1513228933.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:13.345Z,1513228933.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:13.368Z,1513228933.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:13.441Z,1513228933.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:13.747Z,1513228933.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:13.767Z,1513228933.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:14.147Z,1513228934.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:14.161Z,1513228934.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:14.237Z,1513228934.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:14.561Z,1513228934.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:14.593Z,1513228934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:15.033Z,1513228935.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:15.043Z,1513228935.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:15.095Z,1513228935.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:15.370Z,1513228935.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:15.385Z,1513228935.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:15.446Z,1513228935.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:15.740Z,1513228935.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:15.767Z,1513228935.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:16.139Z,1513228936.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:16.172Z,1513228936.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:16.242Z,1513228936.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:16.539Z,1513228936.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:16.564Z,1513228936.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:16.962Z,1513228936.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:16.983Z,1513228936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:17.037Z,1513228937.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:17.354Z,1513228937.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:17.376Z,1513228937.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:17.441Z,1513228937.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:17.767Z,1513228937.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:17.781Z,1513228937.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:18.173Z,1513228938.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:18.187Z,1513228938.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:18.238Z,1513228938.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:18.558Z,1513228938.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:18.582Z,1513228938.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:18.949Z,1513228938.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:18.964Z,1513228938.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:19.033Z,1513228939.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:19.344Z,1513228939.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:19.410Z,1513228939.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:19.437Z,1513228939.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:19.751Z,1513228939.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:19.771Z,1513228939.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:20.150Z,1513228940.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:20.224Z,1513228940.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:20.234Z,1513228940.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:20.551Z,1513228940.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:20.567Z,1513228940.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:20.963Z,1513228940.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:20.996Z,1513228940.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:21.029Z,1513228941.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:21.383Z,1513228941.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:21.433Z,1513228941.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:21.458Z,1513228941.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:21.750Z,1513228941.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:21.765Z,1513228941.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:22.148Z,1513228942.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:22.202Z,1513228942.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:22.230Z,1513228942.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:22.550Z,1513228942.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:22.565Z,1513228942.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:22.948Z,1513228942.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:22.964Z,1513228942.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:23.027Z,1513228943.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:23.342Z,1513228943.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:23.366Z,1513228943.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:23.429Z,1513228943.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:23.758Z,1513228943.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:23.772Z,1513228943.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:24.153Z,1513228944.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:24.192Z,1513228944.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:24.226Z,1513228944.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:24.604Z,1513228944.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:24.651Z,1513228944.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:24.955Z,1513228944.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:24.983Z,1513228944.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:25.022Z,1513228945.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:25.345Z,1513228945.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:25.376Z,1513228945.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:25.425Z,1513228945.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:25.744Z,1513228945.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:25.759Z,1513228945.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:26.143Z,1513228946.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:26.158Z,1513228946.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:26.221Z,1513228946.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:26.554Z,1513228946.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:26.577Z,1513228946.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:26.958Z,1513228946.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:27.019Z,1513228947.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:27.052Z,1513228947.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:27.363Z,1513228947.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:27.383Z,1513228947.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:27.441Z,1513228947.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:27.739Z,1513228947.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:27.767Z,1513228947.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:28.147Z,1513228948.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:28.168Z,1513228948.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:28.239Z,1513228948.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:28.548Z,1513228948.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:28.562Z,1513228948.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:28.953Z,1513228948.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:29.034Z,1513228949.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:29.039Z,1513228949.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:29.339Z,1513228949.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:29.366Z,1513228949.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:29.437Z,1513228949.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:29.768Z,1513228949.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:29.783Z,1513228949.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:30.167Z,1513228950.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:30.183Z,1513228950.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:30.234Z,1513228950.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:30.548Z,1513228950.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:30.589Z,1513228950.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:30.994Z,1513228950.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:31.030Z,1513228951.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:31.063Z,1513228951.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:31.345Z,1513228951.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:31.360Z,1513228951.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:31.433Z,1513228951.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:31.744Z,1513228951.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:31.777Z,1513228951.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:32.155Z,1513228952.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:32.193Z,1513228952.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:32.230Z,1513228952.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:32.562Z,1513228952.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:32.586Z,1513228952.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:32.957Z,1513228952.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:32.988Z,1513228952.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:33.025Z,1513228953.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:33.357Z,1513228953.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:33.373Z,1513228953.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:33.429Z,1513228953.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:33.747Z,1513228953.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:33.762Z,1513228953.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:34.143Z,1513228954.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:34.214Z,1513228954.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:34.226Z,1513228954.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:34.539Z,1513228954.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:34.574Z,1513228954.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:34.963Z,1513228954.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:34.978Z,1513228954.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:35.022Z,1513228955.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:35.339Z,1513228955.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:35.376Z,1513228955.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:35.425Z,1513228955.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:35.763Z,1513228955.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:35.795Z,1513228955.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:36.161Z,1513228956.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:36.176Z,1513228956.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:36.222Z,1513228956.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:36.549Z,1513228956.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:36.574Z,1513228956.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:36.948Z,1513228956.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:36.963Z,1513228956.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:37.017Z,1513228957.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:37.384Z,1513228957.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:37.403Z,1513228957.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:37.421Z,1513228957.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:37.739Z,1513228957.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:37.773Z,1513228957.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:38.136Z,1513228958.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:38.162Z,1513228958.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:38.218Z,1513228958.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:38.561Z,1513228958.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:38.576Z,1513228958.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:38.962Z,1513228958.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:38.983Z,1513228958.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:39.014Z,1513228959.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:39.368Z,1513228959.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:39.382Z,1513228959.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:39.417Z,1513228959.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:39.744Z,1513228959.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:39.771Z,1513228959.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:40.135Z,1513228960.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:40.168Z,1513228960.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:40.214Z,1513228960.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:40.543Z,1513228960.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:40.569Z,1513228960.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:40.940Z,1513228960.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:41.011Z,1513228961.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:41.030Z,1513228961.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:41.349Z,1513228961.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:41.364Z,1513228961.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:41.437Z,1513228961.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:41.764Z,1513228961.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:41.783Z,1513228961.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:42.234Z,1513228962.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:43.030Z,1513228963.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:43.433Z,1513228963.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:44.230Z,1513228964.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.025Z,1513228965.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.281Z,1513228965.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.331Z,1513228965.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:45.429Z,1513228965.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.459Z,1513228965.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.491Z,1513228965.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:45.814Z,1513228965.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:45.830Z,1513228965.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:46.216Z,1513228966.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:46.226Z,1513228966.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:46.271Z,1513228966.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:46.612Z,1513228966.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:46.692Z,1513228966.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:47.013Z,1513228967.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:47.021Z,1513228967.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:47.075Z,1513228967.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:47.419Z,1513228967.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:47.425Z,1513228967.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:47.435Z,1513228967.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:47.825Z,1513228967.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:47.868Z,1513228967.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:48.222Z,1513228968.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:48.222Z,1513228968.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:48.236Z,1513228968.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:48.621Z,1513228968.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:48.711Z,1513228968.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:49.012Z,1513228969.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:49.017Z,1513228969.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:49.029Z,1513228969.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:49.417Z,1513228969.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:49.421Z,1513228969.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:49.432Z,1513228969.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:49.817Z,1513228969.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:49.832Z,1513228969.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:50.208Z,1513228970.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:50.218Z,1513228970.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:50.236Z,1513228970.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:50.634Z,1513228970.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:50.727Z,1513228970.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:51.014Z,1513228971.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:51.062Z,1513228971.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:51.090Z,1513228971.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:51.418Z,1513228971.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:51.429Z,1513228971.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:51.444Z,1513228971.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:51.803Z,1513228971.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:51.838Z,1513228971.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:52.211Z,1513228972.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:52.214Z,1513228972.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:52.227Z,1513228972.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:52.613Z,1513228972.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:52.628Z,1513228972.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:53.004Z,1513228973.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:53.009Z,1513228973.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:53.043Z,1513228973.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:53.407Z,1513228973.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:53.413Z,1513228973.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:53.436Z,1513228973.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:53.818Z,1513228973.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:53.848Z,1513228973.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:54.210Z,1513228974.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:54.259Z,1513228974.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:54.306Z,1513228974.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:54.614Z,1513228974.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:54.640Z,1513228974.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:55.007Z,1513228975.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:55.061Z,1513228975.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:55.116Z,1513228975.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:55.407Z,1513228975.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:55.433Z,1513228975.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:55.449Z,1513228975.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:55.808Z,1513228975.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:55.839Z,1513228975.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:56.203Z,1513228976.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:56.234Z,1513228976.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:56.246Z,1513228976.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:56.622Z,1513228976.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:56.645Z,1513228976.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:57.042Z,1513228977.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:57.086Z,1513228977.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:57.101Z,1513228977.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:57.446Z,1513228977.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:57.456Z,1513228977.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:57.495Z,1513228977.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:57.810Z,1513228977.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:57.845Z,1513228977.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:58.211Z,1513228978.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:58.242Z,1513228978.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:58.247Z,1513228978.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:58.610Z,1513228978.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:58.693Z,1513228978.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:59.013Z,1513228979.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:59.028Z,1513228979.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:59.037Z,1513228979.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:59.413Z,1513228979.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:59.435Z,1513228979.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:22:59.441Z,1513228979.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:59.820Z,1513228979.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:22:59.836Z,1513228979.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:00.224Z,1513228980.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:00.238Z,1513228980.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:00.275Z,1513228980.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:00.630Z,1513228980.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:00.717Z,1513228980.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:01.014Z,1513228981.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:01.029Z,1513228981.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:01.034Z,1513228981.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:01.418Z,1513228981.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:01.432Z,1513228981.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:01.445Z,1513228981.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:01.814Z,1513228981.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:01.829Z,1513228981.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:02.212Z,1513228982.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:02.229Z,1513228982.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:02.250Z,1513228982.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:02.617Z,1513228982.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:02.711Z,1513228982.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:03.022Z,1513228983.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:03.037Z,1513228983.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:03.046Z,1513228983.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:03.423Z,1513228983.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:03.443Z,1513228983.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:03.457Z,1513228983.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:03.818Z,1513228983.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:03.833Z,1513228983.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:04.214Z,1513228984.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:04.235Z,1513228984.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:04.270Z,1513228984.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:04.610Z,1513228984.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:04.692Z,1513228984.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:05.008Z,1513228985.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:05.042Z,1513228985.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:05.073Z,1513228985.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:05.403Z,1513228985.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:05.460Z,1513228985.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:05.477Z,1513228985.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:05.828Z,1513228985.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:05.843Z,1513228985.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:06.230Z,1513228986.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:06.271Z,1513228986.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:06.282Z,1513228986.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:06.623Z,1513228986.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:06.653Z,1513228986.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:07.061Z,1513228987.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:07.078Z,1513228987.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:07.123Z,1513228987.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:07.414Z,1513228987.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:07.435Z,1513228987.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:07.481Z,1513228987.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:07.819Z,1513228987.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:07.835Z,1513228987.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:08.213Z,1513228988.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:08.228Z,1513228988.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:08.278Z,1513228988.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:08.623Z,1513228988.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:08.638Z,1513228988.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:09.074Z,1513228989.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:09.080Z,1513228989.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:09.095Z,1513228989.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:09.424Z,1513228989.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:09.450Z,1513228989.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:09.477Z,1513228989.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:09.808Z,1513228989.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:09.834Z,1513228989.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:10.201Z,1513228990.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:10.274Z,1513228990.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:10.283Z,1513228990.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:10.604Z,1513228990.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:10.640Z,1513228990.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:11.054Z,1513228991.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:11.069Z,1513228991.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:11.097Z,1513228991.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:11.409Z,1513228991.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:11.444Z,1513228991.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:11.513Z,1513228991.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:11.815Z,1513228991.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:11.851Z,1513228991.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:12.233Z,1513228992.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:12.247Z,1513228992.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:12.309Z,1513228992.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:12.613Z,1513228992.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:12.699Z,1513228992.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:13.012Z,1513228993.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:13.027Z,1513228993.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:13.089Z,1513228993.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:13.448Z,1513228993.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:13.468Z,1513228993.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:13.814Z,1513228993.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:13.828Z,1513228993.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:13.886Z,1513228993.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:14.210Z,1513228994.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:14.231Z,1513228994.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:14.617Z,1513228994.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:14.682Z,1513228994.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:14.714Z,1513228994.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:15.024Z,1513228995.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:15.047Z,1513228995.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:15.097Z,1513228995.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:15.426Z,1513228995.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:15.479Z,1513228995.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:15.817Z,1513228995.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:15.831Z,1513228995.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:15.893Z,1513228995.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:16.204Z,1513228996.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:16.239Z,1513228996.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:16.689Z,1513228996.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:16.690Z,1513228996.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:16.714Z,1513228996.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:17.039Z,1513228997.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:17.059Z,1513228997.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:17.137Z,1513228997.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:17.426Z,1513228997.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:17.441Z,1513228997.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:17.842Z,1513228997.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:17.856Z,1513228997.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:17.934Z,1513228997.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:18.221Z,1513228998.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:18.235Z,1513228998.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:18.598Z,1513228998.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:18.613Z,1513228998.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:18.730Z,1513228998.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:19.004Z,1513228999.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:19.031Z,1513228999.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:19.133Z,1513228999.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:19.411Z,1513228999.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:19.426Z,1513228999.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:19.816Z,1513228999.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:19.835Z,1513228999.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:19.930Z,1513228999.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:20.217Z,1513229000.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:20.239Z,1513229000.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:20.618Z,1513229000.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:20.632Z,1513229000.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:20.737Z,1513229000.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:21.004Z,1513229001.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:21.039Z,1513229001.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:21.142Z,1513229001.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:21.406Z,1513229001.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:21.441Z,1513229001.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:21.804Z,1513229001.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:21.834Z,1513229001.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:21.937Z,1513229001.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:22.207Z,1513229002.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:22.242Z,1513229002.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:22.617Z,1513229002.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:22.647Z,1513229002.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:22.733Z,1513229002.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:23.078Z,1513229003.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:23.107Z,1513229003.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:23.434Z,1513229003.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:23.464Z,1513229003.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:23.466Z,1513229003.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:23.809Z,1513229003.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:23.832Z,1513229003.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:24.216Z,1513229004.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:24.230Z,1513229004.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:24.261Z,1513229004.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:24.607Z,1513229004.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:24.630Z,1513229004.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:25.058Z,1513229005.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:25.071Z,1513229005.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:25.109Z,1513229005.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:25.403Z,1513229005.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:25.437Z,1513229005.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:25.470Z,1513229005.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:25.822Z,1513229005.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:25.836Z,1513229005.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:26.225Z,1513229006.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:26.286Z,1513229006.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:26.327Z,1513229006.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:26.648Z,1513229006.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:26.724Z,1513229006.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:27.013Z,1513229007.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:27.028Z,1513229007.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:27.081Z,1513229007.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:27.411Z,1513229007.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:27.461Z,1513229007.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:27.485Z,1513229007.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:27.812Z,1513229007.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:27.827Z,1513229007.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:28.210Z,1513229008.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:28.261Z,1513229008.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:28.282Z,1513229008.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:28.613Z,1513229008.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:28.694Z,1513229008.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:29.042Z,1513229009.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:29.073Z,1513229009.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:29.077Z,1513229009.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:29.427Z,1513229009.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:29.447Z,1513229009.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:29.482Z,1513229009.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:29.804Z,1513229009.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:29.839Z,1513229009.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:30.207Z,1513229010.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:30.240Z,1513229010.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:30.278Z,1513229010.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:30.600Z,1513229010.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:30.615Z,1513229010.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:31.013Z,1513229011.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:31.028Z,1513229011.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:31.073Z,1513229011.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:31.408Z,1513229011.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:31.435Z,1513229011.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:31.477Z,1513229011.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:31.817Z,1513229011.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:31.839Z,1513229011.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:32.218Z,1513229012.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:32.232Z,1513229012.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:32.692Z,1513229012.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:32.763Z,1513229012.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:33.012Z,1513229013.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:33.031Z,1513229013.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:33.407Z,1513229013.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:33.430Z,1513229013.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:33.814Z,1513229013.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:33.829Z,1513229013.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:34.205Z,1513229014.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:34.232Z,1513229014.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:34.625Z,1513229014.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:34.640Z,1513229014.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:35.025Z,1513229015.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:35.040Z,1513229015.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:35.422Z,1513229015.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:35.436Z,1513229015.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:35.803Z,1513229015.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:35.833Z,1513229015.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:36.204Z,1513229016.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:36.219Z,1513229016.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:36.608Z,1513229016.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:36.667Z,1513229016.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:37.063Z,1513229017.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:37.101Z,1513229017.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:37.415Z,1513229017.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:37.450Z,1513229017.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:37.814Z,1513229017.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:37.849Z,1513229017.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:38.221Z,1513229018.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:38.248Z,1513229018.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:38.626Z,1513229018.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:38.655Z,1513229018.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:39.095Z,1513229019.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:39.127Z,1513229019.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:39.410Z,1513229019.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:39.432Z,1513229019.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:39.810Z,1513229019.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:39.828Z,1513229019.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:40.210Z,1513229020.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:40.233Z,1513229020.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:40.618Z,1513229020.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:40.696Z,1513229020.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:41.031Z,1513229021.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:41.046Z,1513229021.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:41.428Z,1513229021.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:41.447Z,1513229021.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:41.807Z,1513229021.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:41.833Z,1513229021.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:45.340Z,1513229025.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:45.356Z,1513229025.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:45.476Z,1513229025.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:45.527Z,1513229025.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:45.864Z,1513229025.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:45.878Z,1513229025.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:46.263Z,1513229026.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:46.278Z,1513229026.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:46.694Z,1513229026.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:46.706Z,1513229026.706 [BPC1](ERROR): Failed to parse message.
2017-12-14T05:23:46.706Z,1513229026.706 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:23:46.706Z,1513229026.706 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:23:46.706Z,1513229026.706 [BPC1](ERROR): Data Fault
2017-12-14T05:23:46.723Z,1513229026.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:46.773Z,1513229026.773 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:23:47.039Z,1513229027.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:47.060Z,1513229027.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:47.444Z,1513229027.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:47.459Z,1513229027.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:47.843Z,1513229027.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:47.858Z,1513229027.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:47.888Z,1513229027.888 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:23:47.888Z,1513229027.888 [BPC1] No Fault, FailCount= 1
2017-12-14T05:23:48.246Z,1513229028.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:48.331Z,1513229028.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:48.650Z,1513229028.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:48.758Z,1513229028.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:49.046Z,1513229029.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:49.074Z,1513229029.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:49.446Z,1513229029.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:49.479Z,1513229029.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:49.835Z,1513229029.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:49.851Z,1513229029.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:49.942Z,1513229029.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:50.227Z,1513229030.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:50.242Z,1513229030.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:50.639Z,1513229030.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:50.671Z,1513229030.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:50.737Z,1513229030.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:51.077Z,1513229031.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:51.096Z,1513229031.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:51.446Z,1513229031.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:51.481Z,1513229031.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:51.853Z,1513229031.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:51.882Z,1513229031.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:52.247Z,1513229032.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:52.262Z,1513229032.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:52.644Z,1513229032.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:52.664Z,1513229032.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:53.072Z,1513229033.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:53.092Z,1513229033.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:53.447Z,1513229033.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:53.475Z,1513229033.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:53.860Z,1513229033.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:53.879Z,1513229033.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:54.247Z,1513229034.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:54.283Z,1513229034.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:54.677Z,1513229034.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:54.732Z,1513229034.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:55.043Z,1513229035.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:55.094Z,1513229035.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:55.459Z,1513229035.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:55.476Z,1513229035.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:55.855Z,1513229035.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:55.869Z,1513229035.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:56.246Z,1513229036.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:56.273Z,1513229036.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:56.680Z,1513229036.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:56.780Z,1513229036.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:57.033Z,1513229037.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:57.069Z,1513229037.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:57.442Z,1513229037.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:57.476Z,1513229037.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:57.845Z,1513229037.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:57.879Z,1513229037.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:58.289Z,1513229038.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:58.332Z,1513229038.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:58.667Z,1513229038.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:58.720Z,1513229038.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:59.040Z,1513229039.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:59.056Z,1513229039.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:59.446Z,1513229039.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:59.460Z,1513229039.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:23:59.842Z,1513229039.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:23:59.856Z,1513229039.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:00.242Z,1513229040.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:00.256Z,1513229040.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:00.689Z,1513229040.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:00.723Z,1513229040.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:01.035Z,1513229041.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:01.050Z,1513229041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:01.481Z,1513229041.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:01.511Z,1513229041.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:01.845Z,1513229041.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:01.884Z,1513229041.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:02.242Z,1513229042.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:02.257Z,1513229042.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:02.641Z,1513229042.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:02.656Z,1513229042.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:03.034Z,1513229043.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:03.071Z,1513229043.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:03.456Z,1513229043.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:03.471Z,1513229043.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:03.853Z,1513229043.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:03.876Z,1513229043.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:04.245Z,1513229044.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:04.283Z,1513229044.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:04.634Z,1513229044.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:04.648Z,1513229044.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:05.061Z,1513229045.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:05.104Z,1513229045.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:05.461Z,1513229045.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:05.492Z,1513229045.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:05.851Z,1513229045.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:05.865Z,1513229045.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:06.249Z,1513229046.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:06.272Z,1513229046.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:06.646Z,1513229046.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:06.660Z,1513229046.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:07.061Z,1513229047.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:07.154Z,1513229047.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:07.451Z,1513229047.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:07.466Z,1513229047.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:07.861Z,1513229047.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:07.961Z,1513229047.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:08.242Z,1513229048.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:08.272Z,1513229048.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:08.682Z,1513229048.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:08.743Z,1513229048.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:09.050Z,1513229049.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:09.072Z,1513229049.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:09.450Z,1513229049.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:09.502Z,1513229049.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:09.850Z,1513229049.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:09.864Z,1513229049.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:10.251Z,1513229050.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:10.271Z,1513229050.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:10.676Z,1513229050.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:10.731Z,1513229050.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:11.036Z,1513229051.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:11.068Z,1513229051.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:11.456Z,1513229051.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:11.472Z,1513229051.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:11.842Z,1513229051.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:11.879Z,1513229051.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:12.256Z,1513229052.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:12.271Z,1513229052.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:12.683Z,1513229052.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:12.739Z,1513229052.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:13.038Z,1513229053.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:13.053Z,1513229053.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:13.453Z,1513229053.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:13.491Z,1513229053.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:13.846Z,1513229053.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:13.860Z,1513229053.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:14.257Z,1513229054.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:14.294Z,1513229054.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:14.676Z,1513229054.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:14.741Z,1513229054.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:15.034Z,1513229055.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:15.076Z,1513229055.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:15.456Z,1513229055.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:15.471Z,1513229055.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:15.860Z,1513229055.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:15.875Z,1513229055.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:16.245Z,1513229056.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:16.272Z,1513229056.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:16.636Z,1513229056.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:16.672Z,1513229056.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:17.033Z,1513229057.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:17.048Z,1513229057.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:17.463Z,1513229057.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:17.535Z,1513229057.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:17.845Z,1513229057.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:17.860Z,1513229057.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:18.249Z,1513229058.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:18.283Z,1513229058.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:18.637Z,1513229058.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:18.652Z,1513229058.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:19.063Z,1513229059.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:19.087Z,1513229059.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:19.450Z,1513229059.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:19.464Z,1513229059.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:19.877Z,1513229059.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:19.900Z,1513229059.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:20.251Z,1513229060.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:20.266Z,1513229060.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:20.671Z,1513229060.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:20.706Z,1513229060.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:21.061Z,1513229061.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:21.094Z,1513229061.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:21.450Z,1513229061.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:21.468Z,1513229061.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:21.854Z,1513229061.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:21.869Z,1513229061.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:22.261Z,1513229062.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:22.283Z,1513229062.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:22.675Z,1513229062.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:22.714Z,1513229062.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:23.031Z,1513229063.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:23.048Z,1513229063.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:23.450Z,1513229063.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:23.483Z,1513229063.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:23.852Z,1513229063.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:23.887Z,1513229063.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:24.254Z,1513229064.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:24.287Z,1513229064.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:24.652Z,1513229064.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:24.720Z,1513229064.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:25.043Z,1513229065.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:25.060Z,1513229065.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:25.446Z,1513229065.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:25.467Z,1513229065.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:25.850Z,1513229065.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:25.865Z,1513229065.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:26.248Z,1513229066.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:26.264Z,1513229066.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:26.677Z,1513229066.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:26.724Z,1513229066.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:27.069Z,1513229067.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:27.118Z,1513229067.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:27.456Z,1513229067.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:27.480Z,1513229067.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:27.854Z,1513229067.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:27.879Z,1513229067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:28.255Z,1513229068.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:28.347Z,1513229068.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:28.700Z,1513229068.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:28.740Z,1513229068.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:29.041Z,1513229069.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:29.099Z,1513229069.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:29.446Z,1513229069.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:29.461Z,1513229069.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:29.850Z,1513229069.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:29.903Z,1513229069.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:30.277Z,1513229070.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:30.347Z,1513229070.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:30.642Z,1513229070.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:30.656Z,1513229070.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:31.034Z,1513229071.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:31.064Z,1513229071.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:31.448Z,1513229071.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:31.467Z,1513229071.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:31.869Z,1513229071.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:31.910Z,1513229071.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:32.260Z,1513229072.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:32.276Z,1513229072.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:32.631Z,1513229072.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:32.657Z,1513229072.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:33.072Z,1513229073.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:33.116Z,1513229073.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:33.465Z,1513229073.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:33.484Z,1513229073.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:33.854Z,1513229073.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:33.871Z,1513229073.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:34.249Z,1513229074.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:34.280Z,1513229074.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:34.636Z,1513229074.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:34.662Z,1513229074.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:35.071Z,1513229075.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:35.100Z,1513229075.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:35.459Z,1513229075.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:35.479Z,1513229075.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:35.850Z,1513229075.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:35.871Z,1513229075.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:36.251Z,1513229076.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:36.275Z,1513229076.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:36.717Z,1513229076.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:36.761Z,1513229076.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:37.040Z,1513229077.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:37.059Z,1513229077.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:37.450Z,1513229077.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:37.464Z,1513229077.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:37.850Z,1513229077.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:37.864Z,1513229077.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:38.248Z,1513229078.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:38.302Z,1513229078.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:38.664Z,1513229078.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:38.734Z,1513229078.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.035Z,1513229079.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:39.067Z,1513229079.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.454Z,1513229079.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:39.473Z,1513229079.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.862Z,1513229079.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:39.883Z,1513229079.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.883Z,1513229079.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2017-12-14T05:24:39.883Z,1513229079.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:24:39.885Z,1513229079.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.885Z,1513229079.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2017-12-14T05:24:39.885Z,1513229079.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:24:39.887Z,1513229079.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:39.887Z,1513229079.887 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2017-12-14T05:24:39.887Z,1513229079.887 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:24:39.920Z,1513229079.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:24:39.920Z,1513229079.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:24:39.920Z,1513229079.920 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:24:40.246Z,1513229080.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:40.285Z,1513229080.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:24:40.285Z,1513229080.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2017-12-14T05:24:40.286Z,1513229080.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:24:40.286Z,1513229080.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2017-12-14T05:24:40.286Z,1513229080.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:24:40.286Z,1513229080.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2017-12-14T05:24:40.656Z,1513229080.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:40.716Z,1513229080.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:24:40.725Z,1513229080.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:24:40.725Z,1513229080.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:24:40.726Z,1513229080.726 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:24:40.726Z,1513229080.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:24:40.727Z,1513229080.727 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:24:40.727Z,1513229080.727 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:24:40.727Z,1513229080.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:24:40.728Z,1513229080.728 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:24:41.035Z,1513229081.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:41.055Z,1513229081.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:41.058Z,1513229081.058 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:24:41.058Z,1513229081.058 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:24:41.058Z,1513229081.058 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:24:41.058Z,1513229081.058 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:24:41.445Z,1513229081.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:41.460Z,1513229081.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:41.465Z,1513229081.465 [Default:CheckIn:D] Stopped
2017-12-14T05:24:41.465Z,1513229081.465 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:24:41.850Z,1513229081.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:41.864Z,1513229081.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:41.868Z,1513229081.868 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 291.434570 min 
2017-12-14T05:24:41.868Z,1513229081.868 [Default:CheckIn:E] Stopped
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn] Stopped
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn](INFO): Running loop #29
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn] Running Loop=29
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:24:41.869Z,1513229081.869 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:24:45.362Z,1513229085.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:45.397Z,1513229085.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:45.513Z,1513229085.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:45.552Z,1513229085.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:45.847Z,1513229085.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:45.867Z,1513229085.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:46.260Z,1513229086.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:46.276Z,1513229086.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:46.644Z,1513229086.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:46.675Z,1513229086.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:47.089Z,1513229087.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:47.104Z,1513229087.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:47.473Z,1513229087.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:47.487Z,1513229087.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:47.871Z,1513229087.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:47.886Z,1513229087.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:48.252Z,1513229088.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:48.281Z,1513229088.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:48.643Z,1513229088.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:48.687Z,1513229088.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:49.077Z,1513229089.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:49.147Z,1513229089.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:49.474Z,1513229089.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:49.543Z,1513229089.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:49.861Z,1513229089.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:49.895Z,1513229089.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:50.262Z,1513229090.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:50.297Z,1513229090.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:50.697Z,1513229090.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:50.752Z,1513229090.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:51.052Z,1513229091.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:51.069Z,1513229091.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:51.464Z,1513229091.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:51.592Z,1513229091.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:51.862Z,1513229091.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:51.876Z,1513229091.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:52.254Z,1513229092.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:52.269Z,1513229092.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:52.720Z,1513229092.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:52.771Z,1513229092.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:53.062Z,1513229093.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:53.103Z,1513229093.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:53.466Z,1513229093.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:53.496Z,1513229093.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:53.866Z,1513229093.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:53.896Z,1513229093.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:54.266Z,1513229094.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:54.299Z,1513229094.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:54.726Z,1513229094.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:54.763Z,1513229094.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:55.065Z,1513229095.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:55.080Z,1513229095.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:55.466Z,1513229095.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:55.487Z,1513229095.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:55.866Z,1513229095.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:55.880Z,1513229095.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:56.255Z,1513229096.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:56.282Z,1513229096.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:56.692Z,1513229096.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:56.727Z,1513229096.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:57.050Z,1513229097.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:57.069Z,1513229097.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:57.458Z,1513229097.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:57.473Z,1513229097.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:57.866Z,1513229097.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:57.880Z,1513229097.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:58.254Z,1513229098.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:58.269Z,1513229098.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:58.652Z,1513229098.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:58.667Z,1513229098.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:59.065Z,1513229099.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:59.109Z,1513229099.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:59.462Z,1513229099.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:59.491Z,1513229099.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:24:59.862Z,1513229099.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:24:59.915Z,1513229099.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:00.262Z,1513229100.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:00.295Z,1513229100.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:00.651Z,1513229100.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:00.689Z,1513229100.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:01.067Z,1513229101.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:01.099Z,1513229101.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:01.458Z,1513229101.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:01.474Z,1513229101.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:01.869Z,1513229101.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:01.899Z,1513229101.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:02.292Z,1513229102.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:02.307Z,1513229102.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:02.654Z,1513229102.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:02.675Z,1513229102.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:03.065Z,1513229103.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:03.105Z,1513229103.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:03.467Z,1513229103.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:03.487Z,1513229103.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:03.867Z,1513229103.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:03.887Z,1513229103.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:04.268Z,1513229104.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:04.283Z,1513229104.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:04.736Z,1513229104.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:04.815Z,1513229104.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:05.046Z,1513229105.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:05.083Z,1513229105.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:05.494Z,1513229105.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:05.538Z,1513229105.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:05.866Z,1513229105.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:05.887Z,1513229105.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:06.269Z,1513229106.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:06.291Z,1513229106.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:06.720Z,1513229106.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:06.749Z,1513229106.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:07.052Z,1513229107.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:07.068Z,1513229107.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:07.467Z,1513229107.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:07.490Z,1513229107.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:07.862Z,1513229107.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:07.896Z,1513229107.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:08.259Z,1513229108.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:08.295Z,1513229108.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:08.754Z,1513229108.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:08.787Z,1513229108.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:09.055Z,1513229109.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:09.079Z,1513229109.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:09.465Z,1513229109.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:09.496Z,1513229109.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:09.858Z,1513229109.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:09.895Z,1513229109.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:10.270Z,1513229110.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:10.293Z,1513229110.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:10.714Z,1513229110.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:10.742Z,1513229110.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:11.046Z,1513229111.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:11.103Z,1513229111.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:11.453Z,1513229111.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:11.490Z,1513229111.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:11.867Z,1513229111.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:11.882Z,1513229111.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:12.265Z,1513229112.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:12.335Z,1513229112.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:12.644Z,1513229112.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:12.660Z,1513229112.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:13.051Z,1513229113.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:13.099Z,1513229113.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:13.458Z,1513229113.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:13.473Z,1513229113.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:13.857Z,1513229113.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:13.872Z,1513229113.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:14.259Z,1513229114.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:14.274Z,1513229114.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:14.657Z,1513229114.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:14.672Z,1513229114.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:15.084Z,1513229115.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:15.142Z,1513229115.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:15.460Z,1513229115.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:15.475Z,1513229115.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:15.862Z,1513229115.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:15.883Z,1513229115.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:16.263Z,1513229116.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:16.283Z,1513229116.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:16.657Z,1513229116.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:16.672Z,1513229116.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:17.074Z,1513229117.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:17.109Z,1513229117.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:17.462Z,1513229117.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:17.483Z,1513229117.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:17.864Z,1513229117.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:17.880Z,1513229117.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:18.267Z,1513229118.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:18.313Z,1513229118.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:18.722Z,1513229118.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:18.746Z,1513229118.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:19.045Z,1513229119.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:19.085Z,1513229119.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:19.472Z,1513229119.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:19.487Z,1513229119.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:19.858Z,1513229119.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:19.887Z,1513229119.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:20.257Z,1513229120.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:20.278Z,1513229120.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:20.722Z,1513229120.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:20.737Z,1513229120.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:21.047Z,1513229121.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:21.088Z,1513229121.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:21.495Z,1513229121.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:21.551Z,1513229121.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:21.884Z,1513229121.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:21.903Z,1513229121.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:22.268Z,1513229122.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:22.283Z,1513229122.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:22.719Z,1513229122.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:22.746Z,1513229122.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:23.047Z,1513229123.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:23.079Z,1513229123.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:23.470Z,1513229123.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:23.485Z,1513229123.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:23.870Z,1513229123.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:23.885Z,1513229123.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:24.273Z,1513229124.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:24.288Z,1513229124.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:24.730Z,1513229124.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:24.782Z,1513229124.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:25.043Z,1513229125.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:25.083Z,1513229125.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:25.466Z,1513229125.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:25.488Z,1513229125.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:25.871Z,1513229125.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:25.886Z,1513229125.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:26.255Z,1513229126.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:26.289Z,1513229126.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:26.644Z,1513229126.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:26.675Z,1513229126.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:27.054Z,1513229127.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:27.096Z,1513229127.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:27.463Z,1513229127.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:27.478Z,1513229127.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:27.866Z,1513229127.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:27.887Z,1513229127.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:28.263Z,1513229128.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:28.278Z,1513229128.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:28.651Z,1513229128.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:28.667Z,1513229128.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:29.074Z,1513229129.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:29.122Z,1513229129.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:29.465Z,1513229129.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:29.488Z,1513229129.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:29.868Z,1513229129.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:29.883Z,1513229129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:30.271Z,1513229130.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:30.287Z,1513229130.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:30.653Z,1513229130.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:30.671Z,1513229130.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:31.095Z,1513229131.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:31.134Z,1513229131.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:31.468Z,1513229131.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:31.484Z,1513229131.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:31.865Z,1513229131.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:31.885Z,1513229131.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:32.268Z,1513229132.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:32.283Z,1513229132.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:32.693Z,1513229132.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:32.735Z,1513229132.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:33.049Z,1513229133.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:33.082Z,1513229133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:33.465Z,1513229133.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:33.499Z,1513229133.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:33.861Z,1513229133.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:33.915Z,1513229133.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:34.261Z,1513229134.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:34.333Z,1513229134.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:34.713Z,1513229134.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:34.758Z,1513229134.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:35.051Z,1513229135.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:35.099Z,1513229135.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:35.466Z,1513229135.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:35.495Z,1513229135.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:35.876Z,1513229135.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:35.979Z,1513229135.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:36.276Z,1513229136.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:36.291Z,1513229136.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:36.717Z,1513229136.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:36.753Z,1513229136.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:37.055Z,1513229137.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:37.087Z,1513229137.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:37.482Z,1513229137.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:37.503Z,1513229137.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:37.867Z,1513229137.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:37.882Z,1513229137.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:38.267Z,1513229138.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:38.282Z,1513229138.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:38.692Z,1513229138.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:38.707Z,1513229138.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:39.048Z,1513229139.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:39.076Z,1513229139.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:39.461Z,1513229139.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:39.485Z,1513229139.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:39.861Z,1513229139.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:39.892Z,1513229139.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:40.261Z,1513229140.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:40.283Z,1513229140.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:40.651Z,1513229140.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:40.752Z,1513229140.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:41.071Z,1513229141.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:41.086Z,1513229141.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:41.466Z,1513229141.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:41.488Z,1513229141.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:41.867Z,1513229141.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:41.883Z,1513229141.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:45.393Z,1513229145.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:45.439Z,1513229145.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:45.538Z,1513229145.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:45.586Z,1513229145.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:45.894Z,1513229145.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:45.910Z,1513229145.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:46.299Z,1513229146.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:46.314Z,1513229146.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:46.723Z,1513229146.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:46.757Z,1513229146.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:47.092Z,1513229147.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:47.135Z,1513229147.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:47.510Z,1513229147.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:47.531Z,1513229147.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:47.902Z,1513229147.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:47.924Z,1513229147.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:48.306Z,1513229148.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:48.320Z,1513229148.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:48.727Z,1513229148.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:48.765Z,1513229148.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:49.097Z,1513229149.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:49.112Z,1513229149.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:49.492Z,1513229149.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:49.515Z,1513229149.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:49.897Z,1513229149.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:49.912Z,1513229149.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:50.302Z,1513229150.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:50.342Z,1513229150.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:50.731Z,1513229150.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:50.772Z,1513229150.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:51.111Z,1513229151.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:51.126Z,1513229151.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:51.517Z,1513229151.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:51.532Z,1513229151.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:51.891Z,1513229151.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:51.923Z,1513229151.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:52.292Z,1513229152.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:52.336Z,1513229152.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:52.727Z,1513229152.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:52.750Z,1513229152.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:53.100Z,1513229153.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:53.129Z,1513229153.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:53.560Z,1513229153.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:53.608Z,1513229153.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:53.905Z,1513229153.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:53.938Z,1513229153.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:54.307Z,1513229154.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:54.338Z,1513229154.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:54.757Z,1513229154.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:54.794Z,1513229154.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:55.100Z,1513229155.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:55.115Z,1513229155.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:55.502Z,1513229155.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:55.517Z,1513229155.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:55.901Z,1513229155.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:55.923Z,1513229155.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:56.298Z,1513229156.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:56.316Z,1513229156.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:56.741Z,1513229156.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:56.765Z,1513229156.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:57.105Z,1513229157.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:57.121Z,1513229157.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:57.506Z,1513229157.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:57.587Z,1513229157.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:57.888Z,1513229157.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:57.914Z,1513229157.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:58.292Z,1513229158.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:58.343Z,1513229158.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:58.692Z,1513229158.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:58.727Z,1513229158.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:59.087Z,1513229159.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:59.144Z,1513229159.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:59.514Z,1513229159.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:59.528Z,1513229159.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:25:59.923Z,1513229159.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:25:59.956Z,1513229159.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:00.305Z,1513229160.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:00.339Z,1513229160.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:00.738Z,1513229160.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:00.755Z,1513229160.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:01.095Z,1513229161.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:01.112Z,1513229161.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:01.491Z,1513229161.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:01.515Z,1513229161.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:01.897Z,1513229161.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:01.911Z,1513229161.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:02.288Z,1513229162.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:02.307Z,1513229162.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:02.740Z,1513229162.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:02.757Z,1513229162.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:03.101Z,1513229163.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:03.116Z,1513229163.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:03.507Z,1513229163.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:03.522Z,1513229163.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:03.898Z,1513229163.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:03.913Z,1513229163.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:04.302Z,1513229164.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:04.317Z,1513229164.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:04.725Z,1513229164.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:04.762Z,1513229164.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:05.087Z,1513229165.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:05.123Z,1513229165.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:05.510Z,1513229165.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:05.558Z,1513229165.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:05.897Z,1513229165.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:05.930Z,1513229165.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:06.324Z,1513229166.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:06.376Z,1513229166.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:06.726Z,1513229166.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:06.768Z,1513229166.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:07.087Z,1513229167.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:07.125Z,1513229167.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:07.487Z,1513229167.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:07.542Z,1513229167.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:07.892Z,1513229167.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:07.923Z,1513229167.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:08.291Z,1513229168.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:08.324Z,1513229168.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:08.736Z,1513229168.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:08.788Z,1513229168.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:09.102Z,1513229169.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:09.117Z,1513229169.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:09.515Z,1513229169.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:09.547Z,1513229169.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:09.895Z,1513229169.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:09.915Z,1513229169.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:10.301Z,1513229170.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:10.316Z,1513229170.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:10.695Z,1513229170.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:10.710Z,1513229170.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:11.092Z,1513229171.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:11.144Z,1513229171.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:11.514Z,1513229171.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:11.535Z,1513229171.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:11.905Z,1513229171.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:11.920Z,1513229171.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:12.305Z,1513229172.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:12.320Z,1513229172.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:12.712Z,1513229172.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:12.731Z,1513229172.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:13.091Z,1513229173.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:13.123Z,1513229173.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:13.492Z,1513229173.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:13.523Z,1513229173.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:13.888Z,1513229173.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:13.920Z,1513229173.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:14.291Z,1513229174.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:14.328Z,1513229174.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:14.736Z,1513229174.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:14.752Z,1513229174.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:15.112Z,1513229175.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:15.127Z,1513229175.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:15.513Z,1513229175.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:15.528Z,1513229175.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:15.937Z,1513229175.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:15.991Z,1513229175.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:16.295Z,1513229176.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:16.328Z,1513229176.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:16.716Z,1513229176.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:16.748Z,1513229176.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:17.095Z,1513229177.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:17.179Z,1513229177.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:17.518Z,1513229177.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:17.533Z,1513229177.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:17.905Z,1513229177.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:17.929Z,1513229177.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:18.305Z,1513229178.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:18.327Z,1513229178.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:18.746Z,1513229178.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:18.794Z,1513229178.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:19.098Z,1513229179.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:19.171Z,1513229179.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:19.499Z,1513229179.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:19.619Z,1513229179.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:19.906Z,1513229179.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:19.930Z,1513229179.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:20.290Z,1513229180.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:20.362Z,1513229180.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:20.701Z,1513229180.701 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:26:20.701Z,1513229180.701 [NAL9602] Data Fault, FailCount= 2
2017-12-14T05:26:20.701Z,1513229180.701 [NAL9602](ERROR): Data Fault
2017-12-14T05:26:20.735Z,1513229180.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:20.786Z,1513229180.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:20.837Z,1513229180.837 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:26:21.070Z,1513229181.070 [NAL9602](INFO): Powering down
2017-12-14T05:26:21.103Z,1513229181.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:21.147Z,1513229181.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:21.499Z,1513229181.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:21.518Z,1513229181.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:21.889Z,1513229181.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:21.956Z,1513229181.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:22.047Z,1513229182.047 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T05:26:22.047Z,1513229182.047 [NAL9602] No Fault, FailCount= 2
2017-12-14T05:26:22.290Z,1513229182.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:22.323Z,1513229182.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:22.739Z,1513229182.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:22.809Z,1513229182.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:23.088Z,1513229183.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:23.149Z,1513229183.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:23.488Z,1513229183.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:23.508Z,1513229183.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:23.894Z,1513229183.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:23.944Z,1513229183.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:24.297Z,1513229184.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:24.319Z,1513229184.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:24.697Z,1513229184.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:24.729Z,1513229184.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:25.111Z,1513229185.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:25.142Z,1513229185.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:25.494Z,1513229185.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:25.549Z,1513229185.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:25.894Z,1513229185.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:25.953Z,1513229185.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:26.299Z,1513229186.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:26.319Z,1513229186.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:26.694Z,1513229186.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:26.742Z,1513229186.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:27.092Z,1513229187.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:27.135Z,1513229187.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:27.494Z,1513229187.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:27.515Z,1513229187.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:27.907Z,1513229187.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:27.950Z,1513229187.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:28.305Z,1513229188.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:28.323Z,1513229188.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:28.749Z,1513229188.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:28.764Z,1513229188.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:29.095Z,1513229189.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:29.129Z,1513229189.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:29.522Z,1513229189.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:29.560Z,1513229189.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:29.891Z,1513229189.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:29.905Z,1513229189.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:30.304Z,1513229190.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:30.339Z,1513229190.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:30.779Z,1513229190.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:30.828Z,1513229190.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:31.107Z,1513229191.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:31.134Z,1513229191.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:31.493Z,1513229191.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:31.524Z,1513229191.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:31.889Z,1513229191.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:31.959Z,1513229191.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:32.293Z,1513229192.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:32.378Z,1513229192.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:32.709Z,1513229192.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:32.743Z,1513229192.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:33.100Z,1513229193.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:33.139Z,1513229193.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:33.489Z,1513229193.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:33.528Z,1513229193.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:33.893Z,1513229193.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:33.984Z,1513229193.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:34.294Z,1513229194.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:34.315Z,1513229194.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:34.730Z,1513229194.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:34.793Z,1513229194.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:35.097Z,1513229195.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:35.142Z,1513229195.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:35.495Z,1513229195.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:35.518Z,1513229195.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:35.892Z,1513229195.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:35.935Z,1513229195.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:36.289Z,1513229196.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:36.341Z,1513229196.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:36.760Z,1513229196.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:36.822Z,1513229196.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:37.114Z,1513229197.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:37.161Z,1513229197.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:37.488Z,1513229197.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:37.535Z,1513229197.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:37.888Z,1513229197.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:37.984Z,1513229197.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:38.288Z,1513229198.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:38.319Z,1513229198.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:38.689Z,1513229198.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:38.758Z,1513229198.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:39.112Z,1513229199.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:39.165Z,1513229199.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:39.518Z,1513229199.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:39.565Z,1513229199.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:39.888Z,1513229199.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:39.935Z,1513229199.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:40.288Z,1513229200.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:40.332Z,1513229200.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:40.692Z,1513229200.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:40.747Z,1513229200.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:41.089Z,1513229201.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:41.136Z,1513229201.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:41.502Z,1513229201.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:41.598Z,1513229201.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:41.943Z,1513229201.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:42.040Z,1513229202.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:45.606Z,1513229205.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:45.621Z,1513229205.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:45.715Z,1513229205.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:45.730Z,1513229205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:46.118Z,1513229206.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:46.167Z,1513229206.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:46.522Z,1513229206.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:46.561Z,1513229206.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:46.917Z,1513229206.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:46.964Z,1513229206.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:47.316Z,1513229207.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:47.331Z,1513229207.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:47.712Z,1513229207.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:47.726Z,1513229207.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:48.118Z,1513229208.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:48.133Z,1513229208.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:48.516Z,1513229208.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:48.537Z,1513229208.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:48.917Z,1513229208.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:48.939Z,1513229208.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:49.319Z,1513229209.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:49.339Z,1513229209.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:49.715Z,1513229209.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:49.731Z,1513229209.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:50.118Z,1513229210.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:50.133Z,1513229210.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:50.523Z,1513229210.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:50.538Z,1513229210.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:50.920Z,1513229210.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:50.934Z,1513229210.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:51.294Z,1513229211.294 [NAL9602](INFO): Powering up NAL9602
2017-12-14T05:26:51.325Z,1513229211.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:51.339Z,1513229211.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:51.720Z,1513229211.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:51.735Z,1513229211.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:52.120Z,1513229212.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:52.135Z,1513229212.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:52.523Z,1513229212.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:52.539Z,1513229212.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:52.923Z,1513229212.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:52.937Z,1513229212.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:53.311Z,1513229213.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:53.353Z,1513229213.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:53.708Z,1513229213.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:53.724Z,1513229213.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:54.112Z,1513229214.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:54.127Z,1513229214.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:54.514Z,1513229214.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:54.529Z,1513229214.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:54.908Z,1513229214.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:54.922Z,1513229214.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:55.312Z,1513229215.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:55.383Z,1513229215.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:55.714Z,1513229215.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:55.742Z,1513229215.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:56.114Z,1513229216.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:56.140Z,1513229216.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:56.514Z,1513229216.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:56.540Z,1513229216.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:56.931Z,1513229216.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:56.945Z,1513229216.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:57.310Z,1513229217.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:57.347Z,1513229217.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:57.709Z,1513229217.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:57.736Z,1513229217.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:58.111Z,1513229218.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:58.147Z,1513229218.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:58.504Z,1513229218.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:58.518Z,1513229218.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:58.911Z,1513229218.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:58.947Z,1513229218.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:59.318Z,1513229219.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:59.354Z,1513229219.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:26:59.706Z,1513229219.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:26:59.721Z,1513229219.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:00.111Z,1513229220.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:00.126Z,1513229220.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:00.519Z,1513229220.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:00.533Z,1513229220.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:00.955Z,1513229220.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:00.990Z,1513229220.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:01.320Z,1513229221.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:01.335Z,1513229221.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:01.725Z,1513229221.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:01.739Z,1513229221.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:02.101Z,1513229222.101 [NAL9602](INFO): NAL9602 initialized
2017-12-14T05:27:02.118Z,1513229222.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:02.132Z,1513229222.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:02.521Z,1513229222.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:02.536Z,1513229222.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:02.934Z,1513229222.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:02.965Z,1513229222.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:03.333Z,1513229223.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:03.362Z,1513229223.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:03.729Z,1513229223.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:03.744Z,1513229223.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:04.141Z,1513229224.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:04.183Z,1513229224.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:04.526Z,1513229224.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:04.540Z,1513229224.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:04.918Z,1513229224.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:04.939Z,1513229224.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:05.319Z,1513229225.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:05.340Z,1513229225.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:05.728Z,1513229225.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:05.743Z,1513229225.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:06.129Z,1513229226.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:06.144Z,1513229226.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:06.530Z,1513229226.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:06.551Z,1513229226.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:06.922Z,1513229226.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:06.937Z,1513229226.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:07.353Z,1513229227.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:07.440Z,1513229227.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:07.720Z,1513229227.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:07.739Z,1513229227.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:08.122Z,1513229228.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:08.137Z,1513229228.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:08.521Z,1513229228.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:08.572Z,1513229228.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:08.933Z,1513229228.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:09.031Z,1513229229.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:09.325Z,1513229229.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:09.378Z,1513229229.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:09.725Z,1513229229.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:09.739Z,1513229229.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:10.120Z,1513229230.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:10.134Z,1513229230.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:10.516Z,1513229230.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:10.531Z,1513229230.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:10.912Z,1513229230.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:10.942Z,1513229230.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:11.319Z,1513229231.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:11.347Z,1513229231.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:11.726Z,1513229231.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:11.759Z,1513229231.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:12.186Z,1513229232.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:12.201Z,1513229232.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:12.524Z,1513229232.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:12.551Z,1513229232.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:12.911Z,1513229232.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:12.946Z,1513229232.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:13.311Z,1513229233.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:13.346Z,1513229233.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:13.712Z,1513229233.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:13.747Z,1513229233.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:14.120Z,1513229234.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:14.139Z,1513229234.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:14.522Z,1513229234.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:14.543Z,1513229234.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:14.926Z,1513229234.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:14.948Z,1513229234.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:15.325Z,1513229235.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:15.340Z,1513229235.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:15.726Z,1513229235.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:15.741Z,1513229235.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:16.123Z,1513229236.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:16.137Z,1513229236.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:16.519Z,1513229236.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:16.535Z,1513229236.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:16.921Z,1513229236.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:16.936Z,1513229236.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:17.321Z,1513229237.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:17.335Z,1513229237.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:17.727Z,1513229237.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:17.779Z,1513229237.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:18.134Z,1513229238.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:18.155Z,1513229238.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:18.532Z,1513229238.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:18.546Z,1513229238.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:18.934Z,1513229238.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:18.949Z,1513229238.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:19.323Z,1513229239.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:19.338Z,1513229239.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:19.730Z,1513229239.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:19.745Z,1513229239.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:20.141Z,1513229240.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:20.186Z,1513229240.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:20.511Z,1513229240.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:20.539Z,1513229240.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:20.936Z,1513229240.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:20.951Z,1513229240.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:21.330Z,1513229241.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:21.356Z,1513229241.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:21.731Z,1513229241.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:21.755Z,1513229241.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:22.128Z,1513229242.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:22.155Z,1513229242.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:22.513Z,1513229242.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:22.528Z,1513229242.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:22.920Z,1513229242.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:22.955Z,1513229242.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:23.312Z,1513229243.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:23.372Z,1513229243.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:23.732Z,1513229243.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:23.747Z,1513229243.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:24.136Z,1513229244.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:24.150Z,1513229244.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:24.538Z,1513229244.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:24.553Z,1513229244.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:24.912Z,1513229244.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:24.943Z,1513229244.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:25.312Z,1513229245.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:25.347Z,1513229245.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:25.716Z,1513229245.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:25.760Z,1513229245.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:26.118Z,1513229246.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:26.146Z,1513229246.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:26.545Z,1513229246.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:26.581Z,1513229246.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:26.927Z,1513229246.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:26.944Z,1513229246.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:27.334Z,1513229247.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:27.369Z,1513229247.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:27.726Z,1513229247.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:27.741Z,1513229247.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:28.124Z,1513229248.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:28.139Z,1513229248.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:28.518Z,1513229248.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:28.566Z,1513229248.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:28.919Z,1513229248.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:28.935Z,1513229248.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:29.318Z,1513229249.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:29.345Z,1513229249.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:29.728Z,1513229249.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:29.855Z,1513229249.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:30.150Z,1513229250.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:30.211Z,1513229250.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:30.538Z,1513229250.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:30.559Z,1513229250.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:30.911Z,1513229250.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:30.937Z,1513229250.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:31.311Z,1513229251.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:31.368Z,1513229251.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:31.715Z,1513229251.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:31.742Z,1513229251.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:32.127Z,1513229252.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:32.183Z,1513229252.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:32.511Z,1513229252.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:32.545Z,1513229252.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:32.934Z,1513229252.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:32.955Z,1513229252.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:33.334Z,1513229253.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:33.349Z,1513229253.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:33.730Z,1513229253.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:33.744Z,1513229253.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:34.115Z,1513229254.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:34.171Z,1513229254.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:34.507Z,1513229254.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:34.523Z,1513229254.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:34.917Z,1513229254.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:34.941Z,1513229254.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:35.323Z,1513229255.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:35.355Z,1513229255.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:35.730Z,1513229255.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:35.744Z,1513229255.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:36.133Z,1513229256.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:36.148Z,1513229256.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:36.536Z,1513229256.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:36.555Z,1513229256.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:36.905Z,1513229256.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:36.932Z,1513229256.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:37.319Z,1513229257.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:37.333Z,1513229257.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:37.721Z,1513229257.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:37.735Z,1513229257.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:38.121Z,1513229258.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:38.136Z,1513229258.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:38.524Z,1513229258.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:38.538Z,1513229258.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:38.926Z,1513229258.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:38.972Z,1513229258.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:39.340Z,1513229259.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:39.382Z,1513229259.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:39.728Z,1513229259.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:39.748Z,1513229259.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.125Z,1513229260.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:40.139Z,1513229260.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.512Z,1513229260.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:40.574Z,1513229260.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.932Z,1513229260.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:40.947Z,1513229260.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.947Z,1513229260.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2017-12-14T05:27:40.947Z,1513229260.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:27:40.949Z,1513229260.949 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.949Z,1513229260.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2017-12-14T05:27:40.949Z,1513229260.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:27:40.951Z,1513229260.951 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:40.951Z,1513229260.951 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2017-12-14T05:27:40.951Z,1513229260.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:27:40.980Z,1513229260.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:27:40.980Z,1513229260.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:27:40.980Z,1513229260.980 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:27:41.311Z,1513229261.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:41.370Z,1513229261.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:27:41.370Z,1513229261.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2017-12-14T05:27:41.370Z,1513229261.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:27:41.370Z,1513229261.370 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2017-12-14T05:27:41.371Z,1513229261.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:27:41.371Z,1513229261.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2017-12-14T05:27:41.730Z,1513229261.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:41.744Z,1513229261.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:27:41.745Z,1513229261.745 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:27:41.745Z,1513229261.745 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:27:41.746Z,1513229261.746 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:27:41.746Z,1513229261.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:27:41.746Z,1513229261.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:27:41.747Z,1513229261.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:27:41.747Z,1513229261.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:27:41.747Z,1513229261.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:27:42.133Z,1513229262.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:42.148Z,1513229262.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:45.946Z,1513229265.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:45.967Z,1513229265.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:46.072Z,1513229266.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:46.096Z,1513229266.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:46.460Z,1513229266.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:46.483Z,1513229266.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:46.860Z,1513229266.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:46.874Z,1513229266.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:47.258Z,1513229267.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:47.279Z,1513229267.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:47.664Z,1513229267.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:47.680Z,1513229267.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:48.072Z,1513229268.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:48.103Z,1513229268.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:48.470Z,1513229268.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:48.484Z,1513229268.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:48.853Z,1513229268.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:48.868Z,1513229268.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:49.267Z,1513229269.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:49.282Z,1513229269.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:49.661Z,1513229269.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:49.676Z,1513229269.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:50.085Z,1513229270.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:50.186Z,1513229270.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:50.459Z,1513229270.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:50.474Z,1513229270.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:50.870Z,1513229270.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:50.900Z,1513229270.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:51.264Z,1513229271.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:51.291Z,1513229271.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:51.673Z,1513229271.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:51.695Z,1513229271.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:52.060Z,1513229272.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:52.083Z,1513229272.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:52.448Z,1513229272.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:52.519Z,1513229272.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:52.847Z,1513229272.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:52.913Z,1513229272.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:53.248Z,1513229273.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:53.279Z,1513229273.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:53.668Z,1513229273.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:53.684Z,1513229273.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:54.071Z,1513229274.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:54.123Z,1513229274.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:54.470Z,1513229274.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:54.492Z,1513229274.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:54.871Z,1513229274.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:54.929Z,1513229274.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:55.273Z,1513229275.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:55.297Z,1513229275.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:55.654Z,1513229275.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:55.674Z,1513229275.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:56.060Z,1513229276.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:56.075Z,1513229276.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:56.454Z,1513229276.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:56.468Z,1513229276.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:56.866Z,1513229276.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:56.900Z,1513229276.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:57.260Z,1513229277.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:57.276Z,1513229277.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:57.661Z,1513229277.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:57.702Z,1513229277.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:58.056Z,1513229278.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:58.072Z,1513229278.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:58.496Z,1513229278.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:58.528Z,1513229278.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:58.859Z,1513229278.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:58.879Z,1513229278.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:59.259Z,1513229279.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:59.276Z,1513229279.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:27:59.662Z,1513229279.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:27:59.677Z,1513229279.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:00.065Z,1513229280.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:00.080Z,1513229280.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:00.460Z,1513229280.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:00.475Z,1513229280.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:00.866Z,1513229280.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:00.880Z,1513229280.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:01.256Z,1513229281.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:01.270Z,1513229281.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:01.646Z,1513229281.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:01.677Z,1513229281.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:02.049Z,1513229282.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:02.075Z,1513229282.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:02.448Z,1513229282.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:02.474Z,1513229282.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:02.867Z,1513229282.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:02.887Z,1513229282.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:03.277Z,1513229283.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:03.323Z,1513229283.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:03.669Z,1513229283.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:03.685Z,1513229283.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:04.052Z,1513229284.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:04.077Z,1513229284.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:04.448Z,1513229284.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:04.474Z,1513229284.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:04.852Z,1513229284.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:04.928Z,1513229284.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:05.256Z,1513229285.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:05.275Z,1513229285.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:05.674Z,1513229285.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:05.697Z,1513229285.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:06.065Z,1513229286.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:06.080Z,1513229286.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:06.454Z,1513229286.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:06.470Z,1513229286.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:06.854Z,1513229286.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:06.869Z,1513229286.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:07.260Z,1513229287.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:07.365Z,1513229287.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:07.651Z,1513229287.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:07.673Z,1513229287.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:08.060Z,1513229288.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:08.075Z,1513229288.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:08.457Z,1513229288.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:08.471Z,1513229288.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:08.863Z,1513229288.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:08.883Z,1513229288.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:09.266Z,1513229289.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:09.280Z,1513229289.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:09.666Z,1513229289.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:09.680Z,1513229289.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:10.049Z,1513229290.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:10.080Z,1513229290.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:10.461Z,1513229290.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:10.477Z,1513229290.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:10.856Z,1513229290.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:10.870Z,1513229290.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:11.291Z,1513229291.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:11.327Z,1513229291.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:11.679Z,1513229291.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:11.699Z,1513229291.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:12.058Z,1513229292.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:12.091Z,1513229292.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:12.472Z,1513229292.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:12.487Z,1513229292.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:12.859Z,1513229292.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:12.888Z,1513229292.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:13.248Z,1513229293.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:13.285Z,1513229293.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:13.648Z,1513229293.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:13.679Z,1513229293.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:14.054Z,1513229294.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:14.084Z,1513229294.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:14.501Z,1513229294.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:14.543Z,1513229294.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:14.858Z,1513229294.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:14.885Z,1513229294.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:15.278Z,1513229295.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:15.366Z,1513229295.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:15.672Z,1513229295.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:15.695Z,1513229295.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:16.052Z,1513229296.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:16.103Z,1513229296.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:16.456Z,1513229296.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:16.485Z,1513229296.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:16.855Z,1513229296.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:16.899Z,1513229296.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:17.251Z,1513229297.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:17.287Z,1513229297.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:17.684Z,1513229297.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:17.716Z,1513229297.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:18.065Z,1513229298.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:18.090Z,1513229298.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:18.454Z,1513229298.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:18.475Z,1513229298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:18.852Z,1513229298.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:18.868Z,1513229298.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:19.254Z,1513229299.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:19.275Z,1513229299.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:19.650Z,1513229299.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:19.668Z,1513229299.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:20.059Z,1513229300.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:20.074Z,1513229300.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:20.457Z,1513229300.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:20.471Z,1513229300.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:20.888Z,1513229300.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:20.923Z,1513229300.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:21.271Z,1513229301.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:21.286Z,1513229301.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:21.665Z,1513229301.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:21.688Z,1513229301.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:22.050Z,1513229302.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:22.068Z,1513229302.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:22.460Z,1513229302.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:22.479Z,1513229302.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:22.865Z,1513229302.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:22.887Z,1513229302.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:23.258Z,1513229303.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:23.277Z,1513229303.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:23.670Z,1513229303.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:23.691Z,1513229303.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:24.116Z,1513229304.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:24.143Z,1513229304.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:24.467Z,1513229304.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:24.482Z,1513229304.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:24.868Z,1513229304.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:24.883Z,1513229304.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:25.254Z,1513229305.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:25.292Z,1513229305.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:25.659Z,1513229305.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:25.676Z,1513229305.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:26.062Z,1513229306.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:26.077Z,1513229306.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:26.462Z,1513229306.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:26.477Z,1513229306.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:26.871Z,1513229306.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:26.891Z,1513229306.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:27.280Z,1513229307.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:27.321Z,1513229307.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:27.668Z,1513229307.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:27.687Z,1513229307.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:28.062Z,1513229308.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:28.077Z,1513229308.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:28.460Z,1513229308.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:28.475Z,1513229308.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:28.848Z,1513229308.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:28.886Z,1513229308.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:29.243Z,1513229309.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:29.275Z,1513229309.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:29.673Z,1513229309.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:29.688Z,1513229309.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:30.070Z,1513229310.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:30.084Z,1513229310.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:30.464Z,1513229310.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:30.504Z,1513229310.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:30.849Z,1513229310.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:30.888Z,1513229310.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:31.248Z,1513229311.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:31.285Z,1513229311.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:31.647Z,1513229311.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:31.675Z,1513229311.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:32.047Z,1513229312.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:32.063Z,1513229312.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:32.453Z,1513229312.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:32.468Z,1513229312.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:32.870Z,1513229312.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:32.900Z,1513229312.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:33.266Z,1513229313.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:33.291Z,1513229313.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:33.704Z,1513229313.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:33.771Z,1513229313.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:34.054Z,1513229314.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:34.070Z,1513229314.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:34.456Z,1513229314.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:34.471Z,1513229314.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:34.856Z,1513229314.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:34.875Z,1513229314.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:35.258Z,1513229315.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:35.279Z,1513229315.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:35.664Z,1513229315.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:35.695Z,1513229315.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:36.062Z,1513229316.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:36.093Z,1513229316.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:36.466Z,1513229316.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:36.487Z,1513229316.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:36.884Z,1513229316.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:36.929Z,1513229316.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:37.247Z,1513229317.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:37.338Z,1513229317.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:37.647Z,1513229317.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:37.679Z,1513229317.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:38.051Z,1513229318.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:38.103Z,1513229318.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:38.449Z,1513229318.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:38.479Z,1513229318.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:38.868Z,1513229318.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:38.923Z,1513229318.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:39.265Z,1513229319.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:39.281Z,1513229319.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:39.667Z,1513229319.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:39.687Z,1513229319.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:40.107Z,1513229320.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:40.143Z,1513229320.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:40.449Z,1513229320.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:40.464Z,1513229320.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:40.856Z,1513229320.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:40.879Z,1513229320.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:41.254Z,1513229321.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:41.270Z,1513229321.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:41.657Z,1513229321.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:41.672Z,1513229321.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:42.063Z,1513229322.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:42.078Z,1513229322.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:42.458Z,1513229322.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:42.485Z,1513229322.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:45.864Z,1513229325.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:45.879Z,1513229325.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:45.994Z,1513229325.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:46.033Z,1513229326.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:46.376Z,1513229326.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:46.391Z,1513229326.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:46.774Z,1513229326.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:46.817Z,1513229326.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:47.169Z,1513229327.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:47.247Z,1513229327.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:47.558Z,1513229327.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:47.572Z,1513229327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:47.955Z,1513229327.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:47.970Z,1513229327.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:48.355Z,1513229328.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:48.371Z,1513229328.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:48.759Z,1513229328.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:48.779Z,1513229328.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:49.162Z,1513229329.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:49.180Z,1513229329.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:49.596Z,1513229329.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:49.628Z,1513229329.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:49.966Z,1513229329.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:49.981Z,1513229329.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:50.360Z,1513229330.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:50.374Z,1513229330.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:50.759Z,1513229330.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:50.779Z,1513229330.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:51.161Z,1513229331.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:51.176Z,1513229331.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:51.566Z,1513229331.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:51.587Z,1513229331.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:51.966Z,1513229331.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:51.980Z,1513229331.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:52.382Z,1513229332.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:52.459Z,1513229332.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:52.788Z,1513229332.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:52.823Z,1513229332.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:53.163Z,1513229333.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:53.178Z,1513229333.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:53.563Z,1513229333.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:53.586Z,1513229333.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:53.972Z,1513229333.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:53.995Z,1513229333.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:54.370Z,1513229334.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:54.388Z,1513229334.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:54.748Z,1513229334.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:54.781Z,1513229334.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:55.148Z,1513229335.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:55.185Z,1513229335.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:55.575Z,1513229335.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:55.591Z,1513229335.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:55.986Z,1513229335.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:56.028Z,1513229336.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:56.384Z,1513229336.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:56.399Z,1513229336.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:56.787Z,1513229336.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:56.807Z,1513229336.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:57.148Z,1513229337.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:57.187Z,1513229337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:57.589Z,1513229337.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:57.604Z,1513229337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:57.963Z,1513229337.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:57.989Z,1513229337.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:58.367Z,1513229338.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:58.390Z,1513229338.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:58.755Z,1513229338.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:58.787Z,1513229338.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:59.202Z,1513229339.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:59.323Z,1513229339.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:59.562Z,1513229339.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:59.578Z,1513229339.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:28:59.965Z,1513229339.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:28:59.981Z,1513229339.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:00.368Z,1513229340.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:00.422Z,1513229340.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:00.762Z,1513229340.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:00.776Z,1513229340.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:01.166Z,1513229341.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:01.227Z,1513229341.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:01.566Z,1513229341.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:01.587Z,1513229341.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:01.966Z,1513229341.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:01.987Z,1513229341.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:02.365Z,1513229342.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:02.382Z,1513229342.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:02.761Z,1513229342.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:02.776Z,1513229342.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:03.171Z,1513229343.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:03.187Z,1513229343.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:03.571Z,1513229343.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:03.590Z,1513229343.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:03.973Z,1513229343.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:03.988Z,1513229343.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:04.371Z,1513229344.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:04.391Z,1513229344.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:04.748Z,1513229344.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:04.780Z,1513229344.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:05.161Z,1513229345.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:05.187Z,1513229345.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:05.584Z,1513229345.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:05.647Z,1513229345.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:05.967Z,1513229345.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:05.982Z,1513229345.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:06.370Z,1513229346.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:06.391Z,1513229346.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:06.748Z,1513229346.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:06.782Z,1513229346.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:07.152Z,1513229347.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:07.179Z,1513229347.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:07.572Z,1513229347.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:07.591Z,1513229347.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:07.605Z,1513229347.605 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:29:07.970Z,1513229347.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:07.995Z,1513229347.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:08.367Z,1513229348.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:08.382Z,1513229348.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:08.781Z,1513229348.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:08.823Z,1513229348.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:09.160Z,1513229349.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:09.191Z,1513229349.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:09.581Z,1513229349.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:09.642Z,1513229349.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:09.977Z,1513229349.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:09.992Z,1513229349.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:10.371Z,1513229350.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:10.386Z,1513229350.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:10.773Z,1513229350.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:10.788Z,1513229350.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:11.152Z,1513229351.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:11.175Z,1513229351.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:11.565Z,1513229351.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:11.595Z,1513229351.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:12.014Z,1513229352.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:12.064Z,1513229352.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:12.367Z,1513229352.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:12.407Z,1513229352.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:12.752Z,1513229352.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:12.766Z,1513229352.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:13.154Z,1513229353.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:13.169Z,1513229353.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:13.562Z,1513229353.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:13.576Z,1513229353.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:13.965Z,1513229353.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:13.979Z,1513229353.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:14.354Z,1513229354.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:14.368Z,1513229354.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:14.753Z,1513229354.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:14.769Z,1513229354.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:15.155Z,1513229355.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:15.203Z,1513229355.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:15.566Z,1513229355.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:15.610Z,1513229355.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:15.986Z,1513229355.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:16.007Z,1513229356.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:16.362Z,1513229356.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:16.395Z,1513229356.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:16.749Z,1513229356.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:16.764Z,1513229356.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:17.153Z,1513229357.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:17.169Z,1513229357.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:17.565Z,1513229357.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:17.597Z,1513229357.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:17.968Z,1513229357.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:18.002Z,1513229358.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:18.373Z,1513229358.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:18.410Z,1513229358.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:18.772Z,1513229358.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:18.801Z,1513229358.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:19.157Z,1513229359.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:19.173Z,1513229359.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:19.562Z,1513229359.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:19.600Z,1513229359.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:19.996Z,1513229359.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:20.065Z,1513229360.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:20.363Z,1513229360.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:20.378Z,1513229360.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:20.758Z,1513229360.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:20.779Z,1513229360.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:21.151Z,1513229361.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:21.171Z,1513229361.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:21.581Z,1513229361.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:21.698Z,1513229361.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:21.965Z,1513229361.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:21.993Z,1513229361.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:22.358Z,1513229362.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:22.392Z,1513229362.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:22.748Z,1513229362.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:22.803Z,1513229362.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:23.151Z,1513229363.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:23.184Z,1513229363.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:23.558Z,1513229363.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:23.619Z,1513229363.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:23.973Z,1513229363.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:23.988Z,1513229363.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:24.367Z,1513229364.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:24.390Z,1513229364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:24.774Z,1513229364.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:24.837Z,1513229364.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:25.148Z,1513229365.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:25.171Z,1513229365.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:25.562Z,1513229365.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:25.593Z,1513229365.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:25.971Z,1513229365.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:25.992Z,1513229365.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:26.373Z,1513229366.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:26.387Z,1513229366.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:26.749Z,1513229366.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:26.783Z,1513229366.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:27.160Z,1513229367.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:27.184Z,1513229367.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:27.571Z,1513229367.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:27.586Z,1513229367.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:27.987Z,1513229367.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:28.040Z,1513229368.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:28.384Z,1513229368.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:28.399Z,1513229368.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:28.754Z,1513229368.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:28.785Z,1513229368.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:29.162Z,1513229369.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:29.184Z,1513229369.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:29.570Z,1513229369.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:29.585Z,1513229369.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:29.981Z,1513229369.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:29.996Z,1513229369.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:30.363Z,1513229370.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:30.395Z,1513229370.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:30.779Z,1513229370.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:30.794Z,1513229370.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:31.179Z,1513229371.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:31.235Z,1513229371.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:31.571Z,1513229371.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:31.694Z,1513229371.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:31.974Z,1513229371.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:31.989Z,1513229371.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:32.373Z,1513229372.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:32.395Z,1513229372.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:32.773Z,1513229372.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:32.788Z,1513229372.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:33.159Z,1513229373.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:33.182Z,1513229373.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:33.564Z,1513229373.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:33.587Z,1513229373.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:33.969Z,1513229373.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:33.984Z,1513229373.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:34.396Z,1513229374.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:34.442Z,1513229374.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:34.749Z,1513229374.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:34.787Z,1513229374.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:35.163Z,1513229375.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:35.178Z,1513229375.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:35.554Z,1513229375.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:35.580Z,1513229375.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:35.984Z,1513229375.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:35.000Z,1513229376.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:36.353Z,1513229376.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:36.383Z,1513229376.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:36.783Z,1513229376.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:36.827Z,1513229376.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:37.187Z,1513229377.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:37.207Z,1513229377.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:37.567Z,1513229377.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:37.634Z,1513229377.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:37.959Z,1513229377.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:37.990Z,1513229377.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:38.354Z,1513229378.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:38.370Z,1513229378.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:38.783Z,1513229378.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:38.811Z,1513229378.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:39.159Z,1513229379.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:39.175Z,1513229379.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:39.568Z,1513229379.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:39.605Z,1513229379.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:39.975Z,1513229379.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:40.001Z,1513229380.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:40.366Z,1513229380.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:40.394Z,1513229380.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:40.779Z,1513229380.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:40.831Z,1513229380.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:41.153Z,1513229381.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:41.180Z,1513229381.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:41.572Z,1513229381.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:41.587Z,1513229381.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:41.968Z,1513229381.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:41.990Z,1513229381.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:41.994Z,1513229381.994 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:24:41.9Z
2017-12-14T05:29:41.994Z,1513229381.994 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T05:29:41.994Z,1513229381.994 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T05:29:42.210Z,1513229382.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:42.364Z,1513229382.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:42.395Z,1513229382.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:43.007Z,1513229383.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:43.287Z,1513229383.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:43.304Z,1513229383.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:43.429Z,1513229383.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:46.391Z,1513229386.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:46.480Z,1513229386.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:46.549Z,1513229386.549 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0116.lzma
2017-12-14T05:29:46.586Z,1513229386.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:46.610Z,1513229386.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:46.957Z,1513229386.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:46.983Z,1513229386.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:47.351Z,1513229387.351 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0116.lzma.bak
2017-12-14T05:29:47.351Z,1513229387.351 [DataOverHttps](INFO): SBD MOMSN=5437881
2017-12-14T05:29:47.406Z,1513229387.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:47.476Z,1513229387.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:48.710Z,1513229388.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:48.743Z,1513229388.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:48.845Z,1513229388.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:48.888Z,1513229388.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:52.207Z,1513229392.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:52.233Z,1513229392.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:52.342Z,1513229392.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:52.378Z,1513229392.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:52.746Z,1513229392.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:52.787Z,1513229392.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:53.106Z,1513229393.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:53.120Z,1513229393.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:53.490Z,1513229393.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:53.519Z,1513229393.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:53.904Z,1513229393.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:53.920Z,1513229393.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:57.491Z,1513229397.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:57.539Z,1513229397.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:59.028Z,1513229399.028 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0117.lzma
2017-12-14T05:29:59.097Z,1513229399.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:59.112Z,1513229399.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:29:59.226Z,1513229399.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:29:59.267Z,1513229399.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:01.108Z,1513229401.108 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0117.lzma.bak
2017-12-14T05:30:01.108Z,1513229401.108 [DataOverHttps](INFO): SBD MOMSN=5437883
2017-12-14T05:30:01.161Z,1513229401.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:01.196Z,1513229401.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:23.147Z,1513229423.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:23.167Z,1513229423.167 [BPC1](ERROR): Failed to receive battery data
2017-12-14T05:30:23.167Z,1513229423.167 [BPC1] Communications Fault, FailCount= 1
2017-12-14T05:30:23.167Z,1513229423.167 [BPC1](ERROR): Communications Fault
2017-12-14T05:30:23.175Z,1513229423.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:23.179Z,1513229423.179 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T05:30:23.179Z,1513229423.179 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T05:30:23.179Z,1513229423.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T05:30:23.190Z,1513229423.190 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T05:30:23.283Z,1513229423.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:23.314Z,1513229423.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:24.230Z,1513229424.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:25.027Z,1513229425.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:25.433Z,1513229425.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:26.883Z,1513229426.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:26.898Z,1513229426.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:27.010Z,1513229427.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:27.052Z,1513229427.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:27.081Z,1513229427.081 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:30:27.081Z,1513229427.081 [BPC1] No Fault, FailCount= 1
2017-12-14T05:30:27.394Z,1513229427.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:27.475Z,1513229427.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:27.784Z,1513229427.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:27.811Z,1513229427.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:28.179Z,1513229428.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:28.211Z,1513229428.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:28.575Z,1513229428.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:28.607Z,1513229428.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:28.975Z,1513229428.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:29.010Z,1513229429.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:29.375Z,1513229429.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:29.410Z,1513229429.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:29.799Z,1513229429.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:29.814Z,1513229429.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:30.200Z,1513229430.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:30.214Z,1513229430.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:30.586Z,1513229430.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:30.619Z,1513229430.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:30.983Z,1513229430.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:31.022Z,1513229431.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:31.375Z,1513229431.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:31.395Z,1513229431.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:31.778Z,1513229431.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:31.792Z,1513229431.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:32.179Z,1513229432.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:32.199Z,1513229432.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:32.596Z,1513229432.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:32.698Z,1513229432.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:32.990Z,1513229432.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:33.021Z,1513229433.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:33.397Z,1513229433.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:33.445Z,1513229433.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:33.786Z,1513229433.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:33.807Z,1513229433.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:34.178Z,1513229434.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:34.197Z,1513229434.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:34.588Z,1513229434.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:34.603Z,1513229434.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:34.985Z,1513229434.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:35.007Z,1513229435.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:35.384Z,1513229435.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:35.400Z,1513229435.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:35.790Z,1513229435.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:35.842Z,1513229435.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:36.191Z,1513229436.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:36.206Z,1513229436.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:36.622Z,1513229436.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:36.645Z,1513229436.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:37.051Z,1513229437.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:37.095Z,1513229437.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:37.389Z,1513229437.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:37.404Z,1513229437.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:37.788Z,1513229437.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:37.804Z,1513229437.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:38.186Z,1513229438.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:38.202Z,1513229438.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:38.590Z,1513229438.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:38.605Z,1513229438.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:39.037Z,1513229439.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:39.080Z,1513229439.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:39.394Z,1513229439.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:39.429Z,1513229439.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:39.785Z,1513229439.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:39.800Z,1513229439.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:40.182Z,1513229440.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:40.199Z,1513229440.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:40.583Z,1513229440.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:40.597Z,1513229440.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:40.984Z,1513229440.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:40.998Z,1513229440.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:41.379Z,1513229441.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:41.401Z,1513229441.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:41.793Z,1513229441.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:41.808Z,1513229441.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:41.808Z,1513229441.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2017-12-14T05:30:41.808Z,1513229441.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:30:41.810Z,1513229441.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:41.810Z,1513229441.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2017-12-14T05:30:41.810Z,1513229441.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:30:41.812Z,1513229441.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:41.812Z,1513229441.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2017-12-14T05:30:41.812Z,1513229441.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:30:41.850Z,1513229441.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:30:41.850Z,1513229441.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:30:41.851Z,1513229441.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:30:42.198Z,1513229442.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:42.245Z,1513229442.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:30:42.245Z,1513229442.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2017-12-14T05:30:42.245Z,1513229442.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:30:42.245Z,1513229442.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2017-12-14T05:30:42.246Z,1513229442.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:30:42.246Z,1513229442.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2017-12-14T05:30:42.597Z,1513229442.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:42.618Z,1513229442.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:30:42.618Z,1513229442.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:30:42.619Z,1513229442.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:30:42.619Z,1513229442.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:30:42.619Z,1513229442.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:30:42.620Z,1513229442.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:30:42.620Z,1513229442.620 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:30:42.641Z,1513229442.641 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:30:42.642Z,1513229442.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:30:42.976Z,1513229442.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:42.995Z,1513229442.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:43.386Z,1513229443.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:43.407Z,1513229443.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:43.791Z,1513229443.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:43.811Z,1513229443.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:44.188Z,1513229444.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:44.202Z,1513229444.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:44.591Z,1513229444.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:44.605Z,1513229444.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:45.012Z,1513229445.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:45.031Z,1513229445.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:45.398Z,1513229445.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:45.414Z,1513229445.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:45.775Z,1513229445.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:45.803Z,1513229445.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:46.202Z,1513229446.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:46.223Z,1513229446.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:46.579Z,1513229446.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:46.607Z,1513229446.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:46.976Z,1513229446.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:47.012Z,1513229447.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:47.375Z,1513229447.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:47.408Z,1513229447.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:47.798Z,1513229447.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:47.835Z,1513229447.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:48.198Z,1513229448.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:48.234Z,1513229448.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:48.582Z,1513229448.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:48.605Z,1513229448.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:48.989Z,1513229448.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:49.036Z,1513229449.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:49.398Z,1513229449.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:49.428Z,1513229449.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:49.776Z,1513229449.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:49.829Z,1513229449.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:50.175Z,1513229450.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:50.199Z,1513229450.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:50.603Z,1513229450.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:50.618Z,1513229450.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:51.038Z,1513229451.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:51.078Z,1513229451.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:51.393Z,1513229451.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:51.417Z,1513229451.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:51.780Z,1513229451.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:51.796Z,1513229451.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:52.179Z,1513229452.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:52.199Z,1513229452.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:52.583Z,1513229452.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:52.629Z,1513229452.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:53.008Z,1513229453.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:53.067Z,1513229453.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:53.375Z,1513229453.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:53.411Z,1513229453.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:53.789Z,1513229453.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:53.815Z,1513229453.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:54.201Z,1513229454.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:54.217Z,1513229454.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:54.582Z,1513229454.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:54.615Z,1513229454.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:54.974Z,1513229454.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:54.989Z,1513229454.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:55.383Z,1513229455.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:55.414Z,1513229455.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:55.777Z,1513229455.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:55.840Z,1513229455.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:56.182Z,1513229456.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:56.215Z,1513229456.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:56.591Z,1513229456.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:56.607Z,1513229456.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:56.994Z,1513229456.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:57.009Z,1513229457.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:57.397Z,1513229457.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:57.426Z,1513229457.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:57.793Z,1513229457.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:57.815Z,1513229457.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:58.177Z,1513229458.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:58.226Z,1513229458.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:58.572Z,1513229458.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:58.587Z,1513229458.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:59.036Z,1513229459.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:59.078Z,1513229459.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:59.379Z,1513229459.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:59.399Z,1513229459.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:30:59.806Z,1513229459.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:30:59.835Z,1513229459.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:00.210Z,1513229460.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:00.225Z,1513229460.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:00.594Z,1513229460.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:00.681Z,1513229460.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:00.975Z,1513229460.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:01.009Z,1513229461.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:01.375Z,1513229461.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:01.406Z,1513229461.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:01.772Z,1513229461.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:01.787Z,1513229461.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:02.209Z,1513229462.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:02.236Z,1513229462.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:02.581Z,1513229462.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:02.596Z,1513229462.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:02.676Z,1513229462.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:02.995Z,1513229462.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:03.043Z,1513229463.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:03.129Z,1513229463.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:03.398Z,1513229463.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:03.431Z,1513229463.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:03.798Z,1513229463.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:03.827Z,1513229463.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:03.925Z,1513229463.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:04.181Z,1513229464.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:04.196Z,1513229464.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:04.579Z,1513229464.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:04.593Z,1513229464.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:04.721Z,1513229464.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:05.043Z,1513229465.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:05.071Z,1513229465.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:05.410Z,1513229465.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:05.430Z,1513229465.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:05.436Z,1513229465.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:05.785Z,1513229465.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:05.818Z,1513229465.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:06.193Z,1513229466.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:06.226Z,1513229466.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:06.228Z,1513229466.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:06.589Z,1513229466.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:06.619Z,1513229466.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:07.021Z,1513229467.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:07.054Z,1513229467.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:07.092Z,1513229467.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:07.382Z,1513229467.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:07.403Z,1513229467.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:07.425Z,1513229467.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:07.783Z,1513229467.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:07.803Z,1513229467.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:08.185Z,1513229468.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:08.200Z,1513229468.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:08.221Z,1513229468.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:08.646Z,1513229468.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:08.710Z,1513229468.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:08.986Z,1513229468.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:09.012Z,1513229469.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:09.018Z,1513229469.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:09.404Z,1513229469.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:09.419Z,1513229469.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:09.421Z,1513229469.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:09.794Z,1513229469.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:09.825Z,1513229469.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:10.175Z,1513229470.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:10.217Z,1513229470.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:10.327Z,1513229470.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:10.581Z,1513229470.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:10.596Z,1513229470.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:10.994Z,1513229470.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:11.013Z,1513229471.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:11.054Z,1513229471.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:11.376Z,1513229471.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:11.411Z,1513229471.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:11.417Z,1513229471.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:11.796Z,1513229471.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:11.892Z,1513229471.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:12.199Z,1513229472.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:12.213Z,1513229472.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:12.215Z,1513229472.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:12.590Z,1513229472.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:12.644Z,1513229472.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:12.983Z,1513229472.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:13.009Z,1513229473.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:13.018Z,1513229473.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:13.378Z,1513229473.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:13.413Z,1513229473.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:13.414Z,1513229473.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:13.822Z,1513229473.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:13.837Z,1513229473.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:14.177Z,1513229474.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:14.209Z,1513229474.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:14.192Z,1513229474.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:14.586Z,1513229474.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:14.696Z,1513229474.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:14.994Z,1513229474.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:15.006Z,1513229475.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:15.011Z,1513229475.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:15.394Z,1513229475.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:15.409Z,1513229475.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:15.412Z,1513229475.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:15.788Z,1513229475.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:15.803Z,1513229475.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:16.190Z,1513229476.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:16.205Z,1513229476.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:16.212Z,1513229476.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:16.594Z,1513229476.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:16.609Z,1513229476.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:16.995Z,1513229476.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:17.002Z,1513229477.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:17.044Z,1513229477.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:17.405Z,1513229477.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:17.468Z,1513229477.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:17.498Z,1513229477.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:17.787Z,1513229477.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:17.811Z,1513229477.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:18.202Z,1513229478.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:18.216Z,1513229478.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:18.247Z,1513229478.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:18.578Z,1513229478.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:18.620Z,1513229478.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:18.999Z,1513229478.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:19.067Z,1513229479.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:19.103Z,1513229479.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:19.393Z,1513229479.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:19.423Z,1513229479.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:19.437Z,1513229479.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:19.794Z,1513229479.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:19.818Z,1513229479.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:20.184Z,1513229480.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:20.232Z,1513229480.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:20.234Z,1513229480.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:20.583Z,1513229480.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:20.599Z,1513229480.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:21.030Z,1513229481.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:21.052Z,1513229481.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:21.090Z,1513229481.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:21.380Z,1513229481.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:21.406Z,1513229481.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:21.441Z,1513229481.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:21.795Z,1513229481.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:21.919Z,1513229481.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:22.182Z,1513229482.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:22.220Z,1513229482.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:22.237Z,1513229482.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:22.596Z,1513229482.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:22.679Z,1513229482.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:22.994Z,1513229482.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:23.034Z,1513229483.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:23.064Z,1513229483.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:23.379Z,1513229483.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:23.428Z,1513229483.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:23.437Z,1513229483.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:23.814Z,1513229483.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:23.852Z,1513229483.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:24.234Z,1513229484.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:25.030Z,1513229485.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:25.434Z,1513229485.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:26.229Z,1513229486.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:27.026Z,1513229487.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:27.453Z,1513229487.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:28.250Z,1513229488.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:29.045Z,1513229489.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:29.449Z,1513229489.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:30.028Z,1513229490.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:30.081Z,1513229490.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:30.184Z,1513229490.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:30.230Z,1513229490.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:30.245Z,1513229490.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:30.551Z,1513229490.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:30.582Z,1513229490.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:30.957Z,1513229490.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:31.042Z,1513229491.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:31.045Z,1513229491.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:31.340Z,1513229491.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:31.356Z,1513229491.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:31.446Z,1513229491.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:31.743Z,1513229491.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:31.791Z,1513229491.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:32.140Z,1513229492.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:32.155Z,1513229492.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:32.241Z,1513229492.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:32.534Z,1513229492.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:32.615Z,1513229492.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:32.948Z,1513229492.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:33.037Z,1513229493.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:33.048Z,1513229493.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:33.354Z,1513229493.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:33.402Z,1513229493.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:33.441Z,1513229493.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:33.748Z,1513229493.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:33.776Z,1513229493.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:34.129Z,1513229494.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:34.176Z,1513229494.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:34.238Z,1513229494.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:34.528Z,1513229494.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:34.604Z,1513229494.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:34.942Z,1513229494.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:35.034Z,1513229495.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:35.081Z,1513229495.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:35.330Z,1513229495.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:35.382Z,1513229495.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:35.438Z,1513229495.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:35.748Z,1513229495.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:35.788Z,1513229495.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:36.178Z,1513229496.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:36.201Z,1513229496.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:36.234Z,1513229496.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:36.540Z,1513229496.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:36.555Z,1513229496.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:36.975Z,1513229496.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:36.998Z,1513229496.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:37.029Z,1513229497.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:37.339Z,1513229497.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:37.367Z,1513229497.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:37.433Z,1513229497.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:37.750Z,1513229497.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:37.810Z,1513229497.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:38.131Z,1513229498.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:38.204Z,1513229498.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:38.229Z,1513229498.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:38.529Z,1513229498.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:38.608Z,1513229498.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:38.952Z,1513229498.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:38.984Z,1513229498.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:39.025Z,1513229499.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:39.348Z,1513229499.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:39.387Z,1513229499.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:39.429Z,1513229499.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:39.748Z,1513229499.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:39.787Z,1513229499.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:40.161Z,1513229500.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:40.192Z,1513229500.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:40.226Z,1513229500.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:40.548Z,1513229500.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:40.571Z,1513229500.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:40.930Z,1513229500.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:40.965Z,1513229500.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:41.022Z,1513229501.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:41.360Z,1513229501.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:41.407Z,1513229501.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:41.425Z,1513229501.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:41.752Z,1513229501.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:41.818Z,1513229501.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:42.153Z,1513229502.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:42.204Z,1513229502.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:42.221Z,1513229502.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:42.550Z,1513229502.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:42.574Z,1513229502.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:42.946Z,1513229502.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:42.984Z,1513229502.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:43.033Z,1513229503.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:43.339Z,1513229503.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:43.404Z,1513229503.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:43.439Z,1513229503.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:43.739Z,1513229503.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:43.790Z,1513229503.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:44.139Z,1513229504.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:44.183Z,1513229504.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:44.234Z,1513229504.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:44.531Z,1513229504.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:44.546Z,1513229504.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:44.942Z,1513229504.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:44.963Z,1513229504.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:45.030Z,1513229505.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:45.342Z,1513229505.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:45.363Z,1513229505.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:45.433Z,1513229505.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:45.740Z,1513229505.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:45.755Z,1513229505.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:46.136Z,1513229506.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:46.151Z,1513229506.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:46.229Z,1513229506.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:46.540Z,1513229506.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:46.554Z,1513229506.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:46.929Z,1513229506.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:47.021Z,1513229507.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:47.025Z,1513229507.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:47.328Z,1513229507.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:47.355Z,1513229507.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:47.429Z,1513229507.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:47.742Z,1513229507.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:47.777Z,1513229507.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:48.142Z,1513229508.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:48.195Z,1513229508.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:48.225Z,1513229508.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:48.546Z,1513229508.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:48.575Z,1513229508.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:48.934Z,1513229508.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:48.949Z,1513229508.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:49.022Z,1513229509.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:49.330Z,1513229509.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:49.361Z,1513229509.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:49.425Z,1513229509.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:49.739Z,1513229509.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:49.754Z,1513229509.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:50.138Z,1513229510.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:50.154Z,1513229510.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:50.221Z,1513229510.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:50.540Z,1513229510.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:50.556Z,1513229510.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:50.953Z,1513229510.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:50.988Z,1513229510.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:51.033Z,1513229511.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:51.364Z,1513229511.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:51.398Z,1513229511.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:51.437Z,1513229511.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:51.743Z,1513229511.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:51.764Z,1513229511.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:52.127Z,1513229512.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:52.159Z,1513229512.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:52.235Z,1513229512.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:52.527Z,1513229512.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:52.563Z,1513229512.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:52.954Z,1513229512.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:52.970Z,1513229512.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:53.029Z,1513229513.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:53.328Z,1513229513.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:53.368Z,1513229513.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:53.433Z,1513229513.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:53.755Z,1513229513.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:53.775Z,1513229513.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:54.154Z,1513229514.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:54.215Z,1513229514.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:54.229Z,1513229514.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:54.556Z,1513229514.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:54.669Z,1513229514.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:54.938Z,1513229514.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:54.953Z,1513229514.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:55.026Z,1513229515.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:55.336Z,1513229515.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:55.387Z,1513229515.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:55.429Z,1513229515.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:55.735Z,1513229515.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:55.751Z,1513229515.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:56.137Z,1513229516.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:56.185Z,1513229516.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:56.225Z,1513229516.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:56.539Z,1513229516.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:56.588Z,1513229516.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:56.950Z,1513229516.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:56.971Z,1513229516.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:57.021Z,1513229517.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:57.351Z,1513229517.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:57.373Z,1513229517.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:57.425Z,1513229517.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:57.752Z,1513229517.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:57.767Z,1513229517.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:58.127Z,1513229518.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:58.159Z,1513229518.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:58.222Z,1513229518.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:58.529Z,1513229518.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:58.596Z,1513229518.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:58.928Z,1513229518.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:58.959Z,1513229518.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:59.018Z,1513229519.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:59.327Z,1513229519.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:59.343Z,1513229519.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:31:59.421Z,1513229519.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:59.740Z,1513229519.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:31:59.770Z,1513229519.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:00.156Z,1513229520.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:00.176Z,1513229520.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:00.217Z,1513229520.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:00.545Z,1513229520.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:00.566Z,1513229520.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:01.011Z,1513229521.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:01.016Z,1513229521.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:01.062Z,1513229521.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:01.335Z,1513229521.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:01.350Z,1513229521.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:01.429Z,1513229521.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:01.734Z,1513229521.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:01.752Z,1513229521.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:02.133Z,1513229522.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:02.147Z,1513229522.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:02.226Z,1513229522.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:02.530Z,1513229522.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:02.563Z,1513229522.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:02.945Z,1513229522.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:03.022Z,1513229523.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:03.026Z,1513229523.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:03.352Z,1513229523.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:03.367Z,1513229523.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:03.425Z,1513229523.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:03.748Z,1513229523.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:03.762Z,1513229523.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:04.130Z,1513229524.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:04.222Z,1513229524.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:04.242Z,1513229524.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:04.527Z,1513229524.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:04.561Z,1513229524.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:04.928Z,1513229524.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:04.954Z,1513229524.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:05.017Z,1513229525.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:05.327Z,1513229525.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:05.353Z,1513229525.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:05.421Z,1513229525.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:05.758Z,1513229525.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:05.779Z,1513229525.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:06.151Z,1513229526.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:06.166Z,1513229526.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:06.217Z,1513229526.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:06.551Z,1513229526.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:06.571Z,1513229526.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:06.933Z,1513229526.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:06.971Z,1513229526.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:07.013Z,1513229527.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:07.339Z,1513229527.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:07.403Z,1513229527.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:07.418Z,1513229527.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:07.733Z,1513229527.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:07.748Z,1513229527.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:08.140Z,1513229528.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:08.155Z,1513229528.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:08.213Z,1513229528.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:08.537Z,1513229528.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:08.552Z,1513229528.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:08.950Z,1513229528.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:08.980Z,1513229528.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:09.033Z,1513229529.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:09.345Z,1513229529.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:09.387Z,1513229529.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:09.437Z,1513229529.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:09.744Z,1513229529.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:09.759Z,1513229529.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:10.136Z,1513229530.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:10.151Z,1513229530.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:10.233Z,1513229530.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:10.563Z,1513229530.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:10.603Z,1513229530.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:10.932Z,1513229530.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:10.959Z,1513229530.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:11.030Z,1513229531.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:11.360Z,1513229531.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:11.383Z,1513229531.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:11.433Z,1513229531.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:11.742Z,1513229531.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:11.756Z,1513229531.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:12.141Z,1513229532.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:12.156Z,1513229532.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:12.229Z,1513229532.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:12.541Z,1513229532.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:12.563Z,1513229532.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:12.939Z,1513229532.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:12.959Z,1513229532.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:13.025Z,1513229533.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:13.345Z,1513229533.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:13.360Z,1513229533.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:13.429Z,1513229533.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:13.738Z,1513229533.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:13.753Z,1513229533.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:14.136Z,1513229534.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:14.151Z,1513229534.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:14.225Z,1513229534.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:14.536Z,1513229534.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:14.551Z,1513229534.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:14.946Z,1513229534.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:15.020Z,1513229535.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:15.022Z,1513229535.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:15.350Z,1513229535.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:15.371Z,1513229535.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:15.445Z,1513229535.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:15.749Z,1513229535.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:15.771Z,1513229535.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:16.139Z,1513229536.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:16.179Z,1513229536.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:16.241Z,1513229536.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:16.541Z,1513229536.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:16.556Z,1513229536.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:17.038Z,1513229537.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:17.048Z,1513229537.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:17.100Z,1513229537.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:17.335Z,1513229537.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:17.383Z,1513229537.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:17.441Z,1513229537.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:17.756Z,1513229537.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:17.771Z,1513229537.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:18.142Z,1513229538.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:18.206Z,1513229538.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:18.237Z,1513229538.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:18.537Z,1513229538.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:18.570Z,1513229538.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:18.930Z,1513229538.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:18.952Z,1513229538.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:19.033Z,1513229539.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:19.352Z,1513229539.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:19.367Z,1513229539.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:19.437Z,1513229539.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:19.737Z,1513229539.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:19.751Z,1513229539.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:20.135Z,1513229540.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:20.163Z,1513229540.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:20.233Z,1513229540.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:20.534Z,1513229540.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:20.558Z,1513229540.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:20.963Z,1513229540.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:20.978Z,1513229540.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:21.029Z,1513229541.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:21.355Z,1513229541.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:21.370Z,1513229541.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:21.433Z,1513229541.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:21.746Z,1513229541.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:21.775Z,1513229541.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:22.140Z,1513229542.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:22.167Z,1513229542.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:22.229Z,1513229542.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:22.524Z,1513229542.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:22.551Z,1513229542.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:22.940Z,1513229542.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:22.955Z,1513229542.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:23.025Z,1513229543.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:23.362Z,1513229543.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:23.401Z,1513229543.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:23.429Z,1513229543.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:23.749Z,1513229543.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:23.764Z,1513229543.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:24.152Z,1513229544.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:24.167Z,1513229544.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:24.225Z,1513229544.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:25.021Z,1513229545.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:25.425Z,1513229545.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:26.221Z,1513229546.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:27.017Z,1513229547.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:27.421Z,1513229547.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:27.756Z,1513229547.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:27.807Z,1513229547.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:27.906Z,1513229547.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:27.951Z,1513229547.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:28.217Z,1513229548.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:28.266Z,1513229548.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:28.282Z,1513229548.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:28.663Z,1513229548.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:28.683Z,1513229548.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:29.015Z,1513229549.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:29.086Z,1513229549.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:29.114Z,1513229549.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:29.421Z,1513229549.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:29.463Z,1513229549.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:29.495Z,1513229549.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:29.873Z,1513229549.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:29.917Z,1513229549.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:30.217Z,1513229550.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:30.280Z,1513229550.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:30.295Z,1513229550.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:30.674Z,1513229550.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:30.688Z,1513229550.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:31.014Z,1513229551.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:31.060Z,1513229551.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:31.104Z,1513229551.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:31.421Z,1513229551.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:31.455Z,1513229551.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:31.498Z,1513229551.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:31.859Z,1513229551.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:31.885Z,1513229551.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:32.217Z,1513229552.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:32.256Z,1513229552.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:32.291Z,1513229552.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:32.719Z,1513229552.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:32.798Z,1513229552.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:33.013Z,1513229553.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:33.119Z,1513229553.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:33.155Z,1513229553.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:33.417Z,1513229553.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:33.482Z,1513229553.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:33.508Z,1513229553.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:33.860Z,1513229553.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:33.887Z,1513229553.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:34.213Z,1513229554.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:34.262Z,1513229554.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:34.289Z,1513229554.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:34.709Z,1513229554.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:34.761Z,1513229554.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:35.013Z,1513229555.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:35.078Z,1513229555.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:35.097Z,1513229555.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:35.417Z,1513229555.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:35.455Z,1513229555.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:35.491Z,1513229555.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:35.887Z,1513229555.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:35.902Z,1513229555.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:36.213Z,1513229556.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:36.298Z,1513229556.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:36.319Z,1513229556.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:36.733Z,1513229556.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:36.748Z,1513229556.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:37.009Z,1513229557.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:37.056Z,1513229557.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:37.079Z,1513229557.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:37.413Z,1513229557.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:37.460Z,1513229557.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:37.491Z,1513229557.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:37.857Z,1513229557.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:37.888Z,1513229557.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:38.209Z,1513229558.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:38.309Z,1513229558.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:38.343Z,1513229558.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:38.713Z,1513229558.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:38.749Z,1513229558.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:39.005Z,1513229559.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:39.082Z,1513229559.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:39.131Z,1513229559.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:39.409Z,1513229559.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:39.510Z,1513229559.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:39.554Z,1513229559.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:39.862Z,1513229559.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:39.878Z,1513229559.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:40.205Z,1513229560.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:40.263Z,1513229560.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:40.315Z,1513229560.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:40.661Z,1513229560.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:40.760Z,1513229560.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:41.001Z,1513229561.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:41.074Z,1513229561.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:41.123Z,1513229561.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:41.405Z,1513229561.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:41.467Z,1513229561.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:41.487Z,1513229561.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:41.878Z,1513229561.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:41.905Z,1513229561.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:42.201Z,1513229562.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:42.277Z,1513229562.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:42.311Z,1513229562.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:42.703Z,1513229562.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:42.760Z,1513229562.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:42.999Z,1513229562.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:43.065Z,1513229563.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:43.096Z,1513229563.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:43.417Z,1513229563.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:43.464Z,1513229563.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:43.499Z,1513229563.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:43.861Z,1513229563.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:43.875Z,1513229563.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:44.213Z,1513229564.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:44.262Z,1513229564.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:44.278Z,1513229564.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:44.674Z,1513229564.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:44.708Z,1513229564.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:45.011Z,1513229565.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:45.082Z,1513229565.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:45.106Z,1513229565.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:45.417Z,1513229565.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:45.477Z,1513229565.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:45.511Z,1513229565.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:45.871Z,1513229565.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:45.915Z,1513229565.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:46.213Z,1513229566.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:46.264Z,1513229566.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:46.287Z,1513229566.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:46.710Z,1513229566.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:46.750Z,1513229566.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:47.009Z,1513229567.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:47.074Z,1513229567.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:47.095Z,1513229567.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:47.413Z,1513229567.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:47.465Z,1513229567.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:47.490Z,1513229567.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:47.879Z,1513229567.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:47.895Z,1513229567.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:48.209Z,1513229568.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:48.284Z,1513229568.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:48.300Z,1513229568.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:48.718Z,1513229568.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:48.778Z,1513229568.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:49.008Z,1513229569.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:49.091Z,1513229569.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:49.135Z,1513229569.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:49.413Z,1513229569.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:49.455Z,1513229569.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:49.504Z,1513229569.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:49.857Z,1513229569.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:49.899Z,1513229569.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:50.210Z,1513229570.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:50.259Z,1513229570.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:50.291Z,1513229570.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:50.725Z,1513229570.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:50.744Z,1513229570.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:51.005Z,1513229571.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:51.079Z,1513229571.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:51.106Z,1513229571.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:51.409Z,1513229571.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:51.496Z,1513229571.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:51.510Z,1513229571.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:51.863Z,1513229571.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:51.895Z,1513229571.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:52.205Z,1513229572.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:52.290Z,1513229572.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:52.313Z,1513229572.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:52.702Z,1513229572.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:52.751Z,1513229572.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:53.001Z,1513229573.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:53.073Z,1513229573.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:53.087Z,1513229573.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:53.405Z,1513229573.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:53.456Z,1513229573.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:53.482Z,1513229573.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:53.880Z,1513229573.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:53.895Z,1513229573.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:54.201Z,1513229574.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:54.282Z,1513229574.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:54.297Z,1513229574.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:54.664Z,1513229574.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:54.760Z,1513229574.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:54.999Z,1513229574.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:55.062Z,1513229575.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:55.093Z,1513229575.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:55.405Z,1513229575.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:55.499Z,1513229575.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:55.535Z,1513229575.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:55.870Z,1513229575.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:55.884Z,1513229575.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:56.201Z,1513229576.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:56.270Z,1513229576.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:56.285Z,1513229576.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:56.678Z,1513229576.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:56.693Z,1513229576.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:56.999Z,1513229576.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:57.083Z,1513229577.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:57.111Z,1513229577.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:57.409Z,1513229577.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:57.488Z,1513229577.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:57.503Z,1513229577.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:57.859Z,1513229577.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:57.885Z,1513229577.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:58.205Z,1513229578.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:58.256Z,1513229578.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:58.291Z,1513229578.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:58.681Z,1513229578.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:58.738Z,1513229578.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:59.003Z,1513229579.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:59.098Z,1513229579.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:59.115Z,1513229579.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:59.413Z,1513229579.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:59.460Z,1513229579.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:59.491Z,1513229579.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:32:59.879Z,1513229579.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:32:59.954Z,1513229579.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:00.209Z,1513229580.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:00.281Z,1513229580.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:00.340Z,1513229580.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:00.734Z,1513229580.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:00.749Z,1513229580.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:01.005Z,1513229581.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:01.064Z,1513229581.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:01.080Z,1513229581.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:01.409Z,1513229581.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:01.463Z,1513229581.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:01.519Z,1513229581.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:01.876Z,1513229581.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:01.904Z,1513229581.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:02.205Z,1513229582.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:02.265Z,1513229582.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:02.311Z,1513229582.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:02.711Z,1513229582.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:02.730Z,1513229582.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:03.001Z,1513229583.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:03.078Z,1513229583.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:03.101Z,1513229583.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:03.405Z,1513229583.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:03.471Z,1513229583.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:03.486Z,1513229583.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:03.866Z,1513229583.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:03.882Z,1513229583.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:04.201Z,1513229584.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:04.265Z,1513229584.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:04.280Z,1513229584.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:04.698Z,1513229584.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:04.729Z,1513229584.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:04.998Z,1513229584.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:05.139Z,1513229585.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:05.178Z,1513229585.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:05.401Z,1513229585.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:05.455Z,1513229585.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:05.494Z,1513229585.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:05.882Z,1513229585.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:05.898Z,1513229585.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:06.198Z,1513229586.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:06.281Z,1513229586.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:06.296Z,1513229586.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:06.712Z,1513229586.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:06.743Z,1513229586.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:06.993Z,1513229586.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:07.073Z,1513229587.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:07.104Z,1513229587.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:07.398Z,1513229587.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:07.467Z,1513229587.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:07.487Z,1513229587.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:07.865Z,1513229587.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:07.888Z,1513229587.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:08.196Z,1513229588.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:08.269Z,1513229588.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:08.283Z,1513229588.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:08.680Z,1513229588.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:08.771Z,1513229588.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:08.989Z,1513229588.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:09.081Z,1513229589.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:09.096Z,1513229589.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:09.393Z,1513229589.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:09.474Z,1513229589.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:09.488Z,1513229589.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:09.865Z,1513229589.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:09.880Z,1513229589.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:10.189Z,1513229590.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:10.270Z,1513229590.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:10.285Z,1513229590.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:10.665Z,1513229590.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:10.716Z,1513229590.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:10.987Z,1513229590.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:11.061Z,1513229591.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:11.104Z,1513229591.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:11.421Z,1513229591.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:11.478Z,1513229591.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:11.525Z,1513229591.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:11.870Z,1513229591.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:11.899Z,1513229591.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:12.217Z,1513229592.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:12.284Z,1513229592.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:12.299Z,1513229592.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:12.666Z,1513229592.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:12.692Z,1513229592.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:13.015Z,1513229593.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:13.084Z,1513229593.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:13.103Z,1513229593.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:13.421Z,1513229593.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:13.460Z,1513229593.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:13.496Z,1513229593.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:13.857Z,1513229593.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:13.889Z,1513229593.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:14.217Z,1513229594.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:14.260Z,1513229594.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:14.275Z,1513229594.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:14.726Z,1513229594.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:14.774Z,1513229594.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:15.013Z,1513229595.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:15.074Z,1513229595.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:15.103Z,1513229595.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:15.417Z,1513229595.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:15.476Z,1513229595.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:15.491Z,1513229595.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:15.854Z,1513229595.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:15.889Z,1513229595.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:16.213Z,1513229596.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:16.272Z,1513229596.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:16.286Z,1513229596.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:16.711Z,1513229596.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:16.742Z,1513229596.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:17.009Z,1513229597.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:17.070Z,1513229597.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:17.097Z,1513229597.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:17.413Z,1513229597.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:17.455Z,1513229597.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:17.492Z,1513229597.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:17.883Z,1513229597.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:17.899Z,1513229597.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:18.209Z,1513229598.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:18.291Z,1513229598.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:18.311Z,1513229598.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:18.704Z,1513229598.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:18.727Z,1513229598.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:19.006Z,1513229599.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:19.060Z,1513229599.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:19.080Z,1513229599.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:19.409Z,1513229599.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:19.462Z,1513229599.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:19.485Z,1513229599.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:19.869Z,1513229599.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:19.884Z,1513229599.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:20.206Z,1513229600.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:20.262Z,1513229600.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:20.287Z,1513229600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:20.717Z,1513229600.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:20.742Z,1513229600.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:21.001Z,1513229601.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:21.106Z,1513229601.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:21.137Z,1513229601.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:21.406Z,1513229601.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:21.490Z,1513229601.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:21.595Z,1513229601.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:21.858Z,1513229601.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:21.877Z,1513229601.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:22.202Z,1513229602.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:22.264Z,1513229602.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:22.318Z,1513229602.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:22.662Z,1513229602.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:22.772Z,1513229602.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:22.997Z,1513229602.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:23.071Z,1513229603.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:23.126Z,1513229603.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:23.401Z,1513229603.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:23.462Z,1513229603.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:23.484Z,1513229603.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:23.874Z,1513229603.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:23.888Z,1513229603.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:24.200Z,1513229604.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:24.292Z,1513229604.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:24.322Z,1513229604.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:24.995Z,1513229604.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:25.429Z,1513229605.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:26.225Z,1513229606.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:27.022Z,1513229607.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:27.425Z,1513229607.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:27.772Z,1513229607.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:27.786Z,1513229607.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:27.884Z,1513229607.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:27.931Z,1513229607.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:28.221Z,1513229608.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:28.240Z,1513229608.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:28.281Z,1513229608.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:28.709Z,1513229608.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:28.754Z,1513229608.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:29.017Z,1513229609.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:29.038Z,1513229609.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:29.075Z,1513229609.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:29.421Z,1513229609.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:29.436Z,1513229609.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:29.451Z,1513229609.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:29.849Z,1513229609.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:29.886Z,1513229609.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:30.217Z,1513229610.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:30.249Z,1513229610.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:30.283Z,1513229610.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:30.715Z,1513229610.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:30.755Z,1513229610.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:31.013Z,1513229611.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:31.064Z,1513229611.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:31.099Z,1513229611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:31.417Z,1513229611.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:31.442Z,1513229611.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:31.494Z,1513229611.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:31.843Z,1513229611.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:31.862Z,1513229611.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:32.213Z,1513229612.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:32.255Z,1513229612.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:32.277Z,1513229612.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:32.715Z,1513229612.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:32.838Z,1513229612.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:33.009Z,1513229613.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:33.049Z,1513229613.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:33.065Z,1513229613.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:33.413Z,1513229613.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:33.452Z,1513229613.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:33.471Z,1513229613.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:33.835Z,1513229613.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:33.858Z,1513229613.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:34.209Z,1513229614.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:34.235Z,1513229614.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:34.273Z,1513229614.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:34.689Z,1513229614.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:34.716Z,1513229614.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:35.022Z,1513229615.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:35.043Z,1513229615.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:35.066Z,1513229615.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:35.428Z,1513229615.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:35.439Z,1513229615.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:35.454Z,1513229615.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:35.853Z,1513229615.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:35.876Z,1513229615.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:36.222Z,1513229616.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:36.253Z,1513229616.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:36.268Z,1513229616.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:36.658Z,1513229616.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:36.749Z,1513229616.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:37.017Z,1513229617.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:37.038Z,1513229617.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:37.070Z,1513229617.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:37.421Z,1513229617.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:37.444Z,1513229617.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:37.467Z,1513229617.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:37.846Z,1513229617.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:37.867Z,1513229617.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:38.217Z,1513229618.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:38.243Z,1513229618.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:38.268Z,1513229618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:38.658Z,1513229618.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:38.673Z,1513229618.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:39.014Z,1513229619.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:39.088Z,1513229619.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:39.103Z,1513229619.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:39.421Z,1513229619.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:39.460Z,1513229619.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:39.479Z,1513229619.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:39.841Z,1513229619.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:39.867Z,1513229619.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:40.217Z,1513229620.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:40.266Z,1513229620.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:40.305Z,1513229620.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:40.635Z,1513229620.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:40.671Z,1513229620.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:41.015Z,1513229621.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:41.067Z,1513229621.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:41.099Z,1513229621.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:41.428Z,1513229621.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:41.440Z,1513229621.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:41.472Z,1513229621.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:41.849Z,1513229621.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:41.880Z,1513229621.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:42.221Z,1513229622.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:42.249Z,1513229622.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:42.323Z,1513229622.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:42.699Z,1513229622.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:42.739Z,1513229622.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:42.739Z,1513229622.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2017-12-14T05:33:42.739Z,1513229622.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:33:42.749Z,1513229622.749 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:42.750Z,1513229622.750 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101
2017-12-14T05:33:42.750Z,1513229622.750 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:33:42.752Z,1513229622.752 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:42.752Z,1513229622.752 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2017-12-14T05:33:42.752Z,1513229622.752 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:33:42.787Z,1513229622.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:33:42.787Z,1513229622.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:33:42.787Z,1513229622.787 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:33:43.017Z,1513229623.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:43.050Z,1513229623.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:43.113Z,1513229623.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:33:43.113Z,1513229623.113 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2017-12-14T05:33:43.114Z,1513229623.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:33:43.114Z,1513229623.114 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101
2017-12-14T05:33:43.114Z,1513229623.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:33:43.114Z,1513229623.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2017-12-14T05:33:43.424Z,1513229623.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:43.454Z,1513229623.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:43.471Z,1513229623.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:33:43.472Z,1513229623.472 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:33:43.472Z,1513229623.472 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:33:43.481Z,1513229623.481 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:33:43.481Z,1513229623.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:33:43.482Z,1513229623.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:33:43.482Z,1513229623.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:33:43.482Z,1513229623.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:33:43.483Z,1513229623.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:33:43.848Z,1513229623.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:43.913Z,1513229623.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:44.217Z,1513229624.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:44.236Z,1513229624.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:44.278Z,1513229624.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:44.682Z,1513229624.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:44.715Z,1513229624.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:45.013Z,1513229625.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:45.070Z,1513229625.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:45.092Z,1513229625.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:45.417Z,1513229625.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:45.454Z,1513229625.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:45.483Z,1513229625.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:45.832Z,1513229625.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:45.848Z,1513229625.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:46.213Z,1513229626.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:46.244Z,1513229626.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:46.271Z,1513229626.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:46.712Z,1513229626.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:46.755Z,1513229626.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:47.009Z,1513229627.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:47.040Z,1513229627.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:47.067Z,1513229627.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:47.413Z,1513229627.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:47.452Z,1513229627.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:47.467Z,1513229627.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:47.853Z,1513229627.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:47.868Z,1513229627.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:48.210Z,1513229628.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:48.255Z,1513229628.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:48.293Z,1513229628.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:48.711Z,1513229628.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:48.731Z,1513229628.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:49.019Z,1513229629.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:49.039Z,1513229629.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:49.080Z,1513229629.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:49.422Z,1513229629.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:49.441Z,1513229629.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:49.472Z,1513229629.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:49.846Z,1513229629.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:49.881Z,1513229629.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:50.217Z,1513229630.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:50.248Z,1513229630.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:50.285Z,1513229630.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:50.643Z,1513229630.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:50.742Z,1513229630.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:51.013Z,1513229631.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:51.070Z,1513229631.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:51.099Z,1513229631.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:51.417Z,1513229631.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:51.452Z,1513229631.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:51.468Z,1513229631.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:51.841Z,1513229631.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:51.858Z,1513229631.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:52.213Z,1513229632.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:52.252Z,1513229632.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:52.303Z,1513229632.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:52.646Z,1513229632.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:52.662Z,1513229632.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:53.014Z,1513229633.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:53.095Z,1513229633.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:53.147Z,1513229633.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:53.426Z,1513229633.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:53.436Z,1513229633.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:53.472Z,1513229633.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:53.858Z,1513229633.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:53.874Z,1513229633.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:54.221Z,1513229634.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:54.265Z,1513229634.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:54.281Z,1513229634.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:54.659Z,1513229634.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:54.674Z,1513229634.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:55.019Z,1513229635.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:55.079Z,1513229635.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:55.106Z,1513229635.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:55.439Z,1513229635.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:55.445Z,1513229635.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:55.477Z,1513229635.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:55.836Z,1513229635.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:55.874Z,1513229635.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:56.239Z,1513229636.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:56.241Z,1513229636.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:56.305Z,1513229636.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:56.700Z,1513229636.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:56.755Z,1513229636.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:57.037Z,1513229637.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:57.072Z,1513229637.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:57.087Z,1513229637.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:57.441Z,1513229637.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:57.454Z,1513229637.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:57.487Z,1513229637.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:57.836Z,1513229637.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:57.852Z,1513229637.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:58.237Z,1513229638.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:58.244Z,1513229638.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:58.283Z,1513229638.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:58.687Z,1513229638.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:58.738Z,1513229638.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:59.034Z,1513229639.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:59.047Z,1513229639.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:59.082Z,1513229639.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:59.437Z,1513229639.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:59.476Z,1513229639.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:59.504Z,1513229639.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:33:59.857Z,1513229639.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:33:59.890Z,1513229639.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:00.233Z,1513229640.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:00.257Z,1513229640.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:00.290Z,1513229640.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:00.699Z,1513229640.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:00.747Z,1513229640.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:01.030Z,1513229641.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:01.043Z,1513229641.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:01.058Z,1513229641.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:01.433Z,1513229641.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:01.443Z,1513229641.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:01.458Z,1513229641.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:01.843Z,1513229641.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:01.873Z,1513229641.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:02.229Z,1513229642.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:02.247Z,1513229642.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:02.263Z,1513229642.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:02.722Z,1513229642.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:02.799Z,1513229642.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:03.025Z,1513229643.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:03.064Z,1513229643.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:03.085Z,1513229643.085 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:34:03.085Z,1513229643.085 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:34:03.086Z,1513229643.086 [BPC1](ERROR): Data Fault
2017-12-14T05:34:03.103Z,1513229643.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:03.124Z,1513229643.124 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:34:03.429Z,1513229643.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:03.462Z,1513229643.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:03.476Z,1513229643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:03.834Z,1513229643.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:03.860Z,1513229643.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:04.228Z,1513229644.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:04.239Z,1513229644.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:04.274Z,1513229644.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:04.287Z,1513229644.287 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:34:04.287Z,1513229644.287 [BPC1] No Fault, FailCount= 1
2017-12-14T05:34:04.635Z,1513229644.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:04.791Z,1513229644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:05.022Z,1513229645.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:05.037Z,1513229645.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:05.068Z,1513229645.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:05.426Z,1513229645.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:05.436Z,1513229645.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:05.472Z,1513229645.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:05.866Z,1513229645.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:05.881Z,1513229645.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:06.221Z,1513229646.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:06.262Z,1513229646.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:06.287Z,1513229646.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:06.658Z,1513229646.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:06.690Z,1513229646.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:07.019Z,1513229647.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:07.067Z,1513229647.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:07.103Z,1513229647.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:07.425Z,1513229647.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:07.448Z,1513229647.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:07.467Z,1513229647.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:07.844Z,1513229647.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:07.863Z,1513229647.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:08.234Z,1513229648.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:08.247Z,1513229648.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:08.261Z,1513229648.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:08.647Z,1513229648.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:08.661Z,1513229648.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:09.029Z,1513229649.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:09.098Z,1513229649.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:09.138Z,1513229649.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:09.433Z,1513229649.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:09.461Z,1513229649.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:09.498Z,1513229649.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:09.844Z,1513229649.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:09.859Z,1513229649.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:10.229Z,1513229650.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:10.247Z,1513229650.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:10.262Z,1513229650.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:10.708Z,1513229650.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:10.738Z,1513229650.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:11.026Z,1513229651.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:11.044Z,1513229651.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:11.083Z,1513229651.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:11.429Z,1513229651.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:11.450Z,1513229651.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:11.489Z,1513229651.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:11.839Z,1513229651.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:11.853Z,1513229651.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:12.228Z,1513229652.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:12.235Z,1513229652.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:12.250Z,1513229652.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:12.715Z,1513229652.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:12.737Z,1513229652.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:13.021Z,1513229653.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:13.068Z,1513229653.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:13.119Z,1513229653.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:13.425Z,1513229653.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:13.454Z,1513229653.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:13.468Z,1513229653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:13.853Z,1513229653.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:13.868Z,1513229653.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:14.221Z,1513229654.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:14.252Z,1513229654.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:14.267Z,1513229654.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:14.717Z,1513229654.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:14.752Z,1513229654.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:15.017Z,1513229655.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:15.039Z,1513229655.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:15.079Z,1513229655.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:15.421Z,1513229655.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:15.440Z,1513229655.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:15.508Z,1513229655.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:15.854Z,1513229655.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:15.869Z,1513229655.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:16.217Z,1513229656.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:16.260Z,1513229656.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:16.279Z,1513229656.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:16.692Z,1513229656.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:16.729Z,1513229656.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:17.013Z,1513229657.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:17.039Z,1513229657.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:17.079Z,1513229657.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:17.417Z,1513229657.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:17.436Z,1513229657.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:17.471Z,1513229657.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:17.843Z,1513229657.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:17.874Z,1513229657.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:18.213Z,1513229658.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:18.246Z,1513229658.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:18.260Z,1513229658.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:18.769Z,1513229658.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:18.846Z,1513229658.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:19.009Z,1513229659.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:19.057Z,1513229659.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:19.087Z,1513229659.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:19.413Z,1513229659.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:19.457Z,1513229659.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:19.485Z,1513229659.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:19.857Z,1513229659.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:19.887Z,1513229659.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:20.209Z,1513229660.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:20.247Z,1513229660.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:20.283Z,1513229660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:20.641Z,1513229660.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:20.663Z,1513229660.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:21.014Z,1513229661.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:21.077Z,1513229661.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:21.113Z,1513229661.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:21.437Z,1513229661.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:21.445Z,1513229661.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:21.460Z,1513229661.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:21.858Z,1513229661.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:21.872Z,1513229661.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:22.235Z,1513229662.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:22.249Z,1513229662.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:22.271Z,1513229662.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:22.658Z,1513229662.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:22.672Z,1513229662.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:23.029Z,1513229663.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:23.059Z,1513229663.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:23.099Z,1513229663.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:23.434Z,1513229663.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:23.436Z,1513229663.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:23.496Z,1513229663.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:23.835Z,1513229663.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:23.860Z,1513229663.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:24.230Z,1513229664.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:24.237Z,1513229664.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:24.278Z,1513229664.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:24.707Z,1513229664.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:24.759Z,1513229664.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:25.025Z,1513229665.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:25.429Z,1513229665.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:26.225Z,1513229666.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:27.021Z,1513229667.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:27.425Z,1513229667.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:28.086Z,1513229668.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:28.117Z,1513229668.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:28.222Z,1513229668.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:28.226Z,1513229668.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:28.298Z,1513229668.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:28.597Z,1513229668.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:28.698Z,1513229668.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:29.019Z,1513229669.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:29.026Z,1513229669.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:29.061Z,1513229669.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:29.383Z,1513229669.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:29.411Z,1513229669.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:29.421Z,1513229669.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:29.775Z,1513229669.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:29.814Z,1513229669.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:30.176Z,1513229670.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:30.207Z,1513229670.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:30.217Z,1513229670.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:30.575Z,1513229670.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:30.589Z,1513229670.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:30.998Z,1513229670.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:31.014Z,1513229671.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:31.015Z,1513229671.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:31.399Z,1513229671.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:31.414Z,1513229671.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:31.417Z,1513229671.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:31.795Z,1513229671.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:31.811Z,1513229671.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:32.180Z,1513229672.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:32.205Z,1513229672.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:32.213Z,1513229672.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:32.579Z,1513229672.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:32.606Z,1513229672.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:32.977Z,1513229672.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:33.009Z,1513229673.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:33.015Z,1513229673.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:33.376Z,1513229673.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:33.407Z,1513229673.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:33.413Z,1513229673.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:33.801Z,1513229673.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:33.823Z,1513229673.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:34.205Z,1513229674.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:34.209Z,1513229674.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:34.220Z,1513229674.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:34.597Z,1513229674.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:34.656Z,1513229674.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:35.007Z,1513229675.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:35.043Z,1513229675.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:35.079Z,1513229675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:35.379Z,1513229675.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:35.402Z,1513229675.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:35.453Z,1513229675.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:35.786Z,1513229675.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:35.801Z,1513229675.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:36.178Z,1513229676.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:36.205Z,1513229676.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:36.249Z,1513229676.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:36.586Z,1513229676.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:36.628Z,1513229676.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:37.046Z,1513229677.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:37.058Z,1513229677.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:37.098Z,1513229677.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:37.398Z,1513229677.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:37.414Z,1513229677.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:37.449Z,1513229677.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:37.798Z,1513229677.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:37.842Z,1513229677.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:38.176Z,1513229678.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:38.203Z,1513229678.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:38.245Z,1513229678.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:38.579Z,1513229678.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:38.607Z,1513229678.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:38.976Z,1513229678.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:39.011Z,1513229679.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:39.041Z,1513229679.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:39.379Z,1513229679.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:39.411Z,1513229679.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:39.445Z,1513229679.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:39.798Z,1513229679.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:39.813Z,1513229679.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:40.207Z,1513229680.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:40.221Z,1513229680.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:40.241Z,1513229680.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:40.603Z,1513229680.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:40.689Z,1513229680.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:41.029Z,1513229681.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:41.038Z,1513229681.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:41.073Z,1513229681.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:41.384Z,1513229681.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:41.399Z,1513229681.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:41.441Z,1513229681.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:41.778Z,1513229681.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:41.808Z,1513229681.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:42.183Z,1513229682.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:42.237Z,1513229682.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:42.255Z,1513229682.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:42.575Z,1513229682.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:42.601Z,1513229682.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:42.996Z,1513229682.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:43.021Z,1513229683.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:43.038Z,1513229683.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:43.398Z,1513229683.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:43.419Z,1513229683.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:43.441Z,1513229683.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:43.797Z,1513229683.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:43.813Z,1513229683.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:44.175Z,1513229684.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:44.206Z,1513229684.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:44.237Z,1513229684.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:44.575Z,1513229684.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:44.607Z,1513229684.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:44.988Z,1513229684.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:45.002Z,1513229685.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:45.033Z,1513229685.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:45.383Z,1513229685.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:45.414Z,1513229685.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:45.437Z,1513229685.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:45.792Z,1513229685.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:45.808Z,1513229685.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:46.205Z,1513229686.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:46.233Z,1513229686.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:46.239Z,1513229686.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:46.594Z,1513229686.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:46.602Z,1513229686.602 [BPC1](ERROR): Failed to parse message.
2017-12-14T05:34:46.603Z,1513229686.603 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:34:46.603Z,1513229686.603 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:34:46.603Z,1513229686.603 [BPC1](ERROR): Data Fault
2017-12-14T05:34:46.610Z,1513229686.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:46.656Z,1513229686.656 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:34:46.987Z,1513229686.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:47.017Z,1513229687.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:47.029Z,1513229687.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:47.389Z,1513229687.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:47.404Z,1513229687.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:47.433Z,1513229687.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:47.783Z,1513229687.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:47.803Z,1513229687.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:47.841Z,1513229687.841 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:34:47.841Z,1513229687.841 [BPC1] No Fault, FailCount= 1
2017-12-14T05:34:48.206Z,1513229688.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:48.229Z,1513229688.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:48.288Z,1513229688.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:48.575Z,1513229688.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:48.600Z,1513229688.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:49.026Z,1513229689.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:49.047Z,1513229689.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:49.086Z,1513229689.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:49.389Z,1513229689.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:49.404Z,1513229689.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:49.429Z,1513229689.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:49.790Z,1513229689.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:49.804Z,1513229689.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:50.188Z,1513229690.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:50.203Z,1513229690.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:50.225Z,1513229690.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:50.617Z,1513229690.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:50.649Z,1513229690.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:51.023Z,1513229691.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:51.039Z,1513229691.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:51.099Z,1513229691.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:51.375Z,1513229691.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:51.410Z,1513229691.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:51.453Z,1513229691.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:51.799Z,1513229691.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:51.819Z,1513229691.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:52.194Z,1513229692.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:52.218Z,1513229692.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:52.249Z,1513229692.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:52.581Z,1513229692.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:52.649Z,1513229692.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:52.982Z,1513229692.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:52.996Z,1513229692.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:53.045Z,1513229693.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:53.382Z,1513229693.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:53.401Z,1513229693.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:53.449Z,1513229693.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:53.823Z,1513229693.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:53.852Z,1513229693.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:54.187Z,1513229694.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:54.207Z,1513229694.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:54.245Z,1513229694.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:54.587Z,1513229694.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:54.607Z,1513229694.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:54.997Z,1513229694.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:55.020Z,1513229695.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:55.041Z,1513229695.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:55.402Z,1513229695.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:55.423Z,1513229695.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:55.445Z,1513229695.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:55.785Z,1513229695.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:55.815Z,1513229695.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:56.172Z,1513229696.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:56.187Z,1513229696.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:56.241Z,1513229696.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:56.579Z,1513229696.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:56.704Z,1513229696.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:57.021Z,1513229697.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:57.038Z,1513229697.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:57.052Z,1513229697.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:57.441Z,1513229697.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:57.476Z,1513229697.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:57.490Z,1513229697.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:57.804Z,1513229697.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:57.819Z,1513229697.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:58.194Z,1513229698.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:58.223Z,1513229698.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:58.237Z,1513229698.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:58.593Z,1513229698.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:58.648Z,1513229698.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:58.988Z,1513229698.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:59.022Z,1513229699.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:59.033Z,1513229699.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:59.387Z,1513229699.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:59.419Z,1513229699.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:34:59.437Z,1513229699.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:59.781Z,1513229699.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:34:59.796Z,1513229699.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:00.199Z,1513229700.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:00.233Z,1513229700.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:00.240Z,1513229700.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:00.586Z,1513229700.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:00.601Z,1513229700.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:00.997Z,1513229700.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:01.029Z,1513229701.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:01.034Z,1513229701.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:01.394Z,1513229701.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:01.426Z,1513229701.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:01.433Z,1513229701.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:01.798Z,1513229701.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:01.827Z,1513229701.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:02.182Z,1513229702.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:02.229Z,1513229702.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:02.244Z,1513229702.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:02.576Z,1513229702.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:02.615Z,1513229702.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:03.026Z,1513229703.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:03.043Z,1513229703.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:03.076Z,1513229703.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:03.430Z,1513229703.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:03.442Z,1513229703.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:03.498Z,1513229703.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:03.795Z,1513229703.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:03.828Z,1513229703.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:04.193Z,1513229704.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:04.225Z,1513229704.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:04.243Z,1513229704.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:04.594Z,1513229704.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:04.629Z,1513229704.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:05.008Z,1513229705.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:05.023Z,1513229705.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:05.066Z,1513229705.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:05.379Z,1513229705.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:05.406Z,1513229705.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:05.441Z,1513229705.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:05.776Z,1513229705.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:05.813Z,1513229705.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:06.181Z,1513229706.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:06.215Z,1513229706.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:06.237Z,1513229706.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:06.615Z,1513229706.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:06.718Z,1513229706.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:06.989Z,1513229706.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:07.022Z,1513229707.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:07.033Z,1513229707.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:07.396Z,1513229707.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:07.412Z,1513229707.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:07.437Z,1513229707.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:07.802Z,1513229707.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:07.817Z,1513229707.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:08.182Z,1513229708.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:08.204Z,1513229708.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:08.233Z,1513229708.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:08.578Z,1513229708.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:08.592Z,1513229708.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:08.987Z,1513229708.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:09.003Z,1513229709.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:09.029Z,1513229709.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:09.385Z,1513229709.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:09.399Z,1513229709.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:09.433Z,1513229709.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:09.795Z,1513229709.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:09.810Z,1513229709.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:10.199Z,1513229710.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:10.219Z,1513229710.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:10.229Z,1513229710.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:10.600Z,1513229710.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:10.615Z,1513229710.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:10.976Z,1513229710.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:11.007Z,1513229711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:11.025Z,1513229711.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:11.375Z,1513229711.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:11.408Z,1513229711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:11.429Z,1513229711.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:11.779Z,1513229711.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:11.821Z,1513229711.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:12.180Z,1513229712.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:12.215Z,1513229712.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:12.227Z,1513229712.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:12.579Z,1513229712.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:12.693Z,1513229712.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:13.022Z,1513229713.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:13.027Z,1513229713.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:13.090Z,1513229713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:13.413Z,1513229713.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:13.425Z,1513229713.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:13.432Z,1513229713.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:13.802Z,1513229713.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:13.835Z,1513229713.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:14.182Z,1513229714.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:14.197Z,1513229714.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:14.221Z,1513229714.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:14.585Z,1513229714.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:14.600Z,1513229714.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:14.986Z,1513229714.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:15.007Z,1513229715.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:15.017Z,1513229715.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:15.385Z,1513229715.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:15.399Z,1513229715.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:15.421Z,1513229715.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:15.787Z,1513229715.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:15.807Z,1513229715.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:16.190Z,1513229716.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:16.205Z,1513229716.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:16.217Z,1513229716.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:16.589Z,1513229716.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:16.603Z,1513229716.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:17.015Z,1513229717.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:17.042Z,1513229717.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:17.081Z,1513229717.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:17.383Z,1513229717.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:17.410Z,1513229717.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:17.433Z,1513229717.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:17.783Z,1513229717.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:17.820Z,1513229717.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:18.178Z,1513229718.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:18.192Z,1513229718.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:18.230Z,1513229718.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:18.583Z,1513229718.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:18.623Z,1513229718.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:19.026Z,1513229719.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:19.044Z,1513229719.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:19.083Z,1513229719.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:19.408Z,1513229719.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:19.430Z,1513229719.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:19.445Z,1513229719.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:19.834Z,1513229719.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:19.850Z,1513229719.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:20.190Z,1513229720.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:20.204Z,1513229720.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:20.225Z,1513229720.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:20.588Z,1513229720.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:20.607Z,1513229720.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:20.976Z,1513229720.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:21.011Z,1513229721.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:21.022Z,1513229721.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:21.379Z,1513229721.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:21.419Z,1513229721.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:21.425Z,1513229721.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:21.790Z,1513229721.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:21.823Z,1513229721.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:22.189Z,1513229722.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:22.222Z,1513229722.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:22.224Z,1513229722.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:22.617Z,1513229722.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:22.708Z,1513229722.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:22.980Z,1513229722.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:23.011Z,1513229723.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:23.017Z,1513229723.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:23.386Z,1513229723.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:23.402Z,1513229723.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:23.405Z,1513229723.405 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:35:23.405Z,1513229723.405 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:35:23.405Z,1513229723.405 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:35:23.405Z,1513229723.405 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:35:23.421Z,1513229723.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:23.783Z,1513229723.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:23.798Z,1513229723.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:23.801Z,1513229723.801 [Default:CheckIn:D] Stopped
2017-12-14T05:35:23.801Z,1513229723.801 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:35:24.189Z,1513229724.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:24.211Z,1513229724.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:24.215Z,1513229724.215 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 302.140202 min 
2017-12-14T05:35:24.215Z,1513229724.215 [Default:CheckIn:E] Stopped
2017-12-14T05:35:24.215Z,1513229724.215 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:35:24.215Z,1513229724.215 [Default:CheckIn] Stopped
2017-12-14T05:35:24.215Z,1513229724.215 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:35:24.216Z,1513229724.216 [Default:CheckIn](INFO): Running loop #30
2017-12-14T05:35:24.216Z,1513229724.216 [Default:CheckIn] Running Loop=30
2017-12-14T05:35:24.216Z,1513229724.216 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:35:24.216Z,1513229724.216 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:35:24.225Z,1513229724.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:24.590Z,1513229724.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:24.719Z,1513229724.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:24.000Z,1513229725.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:25.019Z,1513229725.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:25.021Z,1513229725.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:25.425Z,1513229725.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:26.222Z,1513229726.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:27.017Z,1513229727.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:27.421Z,1513229727.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:28.217Z,1513229728.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:28.421Z,1513229728.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:28.471Z,1513229728.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:28.586Z,1513229728.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:28.600Z,1513229728.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:28.928Z,1513229728.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:28.975Z,1513229728.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:29.013Z,1513229729.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:29.335Z,1513229729.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:29.371Z,1513229729.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:29.417Z,1513229729.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:29.728Z,1513229729.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:29.743Z,1513229729.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:30.120Z,1513229730.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:30.139Z,1513229730.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:30.213Z,1513229730.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:30.523Z,1513229730.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:30.538Z,1513229730.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:30.937Z,1513229730.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:31.011Z,1513229731.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:31.023Z,1513229731.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:31.338Z,1513229731.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:31.371Z,1513229731.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:31.429Z,1513229731.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:31.738Z,1513229731.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:31.770Z,1513229731.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:32.130Z,1513229732.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:32.145Z,1513229732.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:32.226Z,1513229732.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:32.529Z,1513229732.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:32.543Z,1513229732.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:32.935Z,1513229732.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:32.997Z,1513229732.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:33.022Z,1513229733.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:33.324Z,1513229733.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:33.359Z,1513229733.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:33.425Z,1513229733.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:33.741Z,1513229733.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:33.760Z,1513229733.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:34.145Z,1513229734.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:34.160Z,1513229734.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:34.221Z,1513229734.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:34.546Z,1513229734.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:34.567Z,1513229734.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:34.927Z,1513229734.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:34.942Z,1513229734.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:35.017Z,1513229735.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:35.371Z,1513229735.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:35.386Z,1513229735.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:35.421Z,1513229735.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:35.736Z,1513229735.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:35.752Z,1513229735.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:36.126Z,1513229736.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:36.155Z,1513229736.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:36.220Z,1513229736.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:36.513Z,1513229736.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:36.545Z,1513229736.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:36.947Z,1513229736.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:36.962Z,1513229736.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:37.014Z,1513229737.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:37.344Z,1513229737.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:37.384Z,1513229737.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:37.417Z,1513229737.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:37.742Z,1513229737.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:37.763Z,1513229737.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:38.119Z,1513229738.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:38.148Z,1513229738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:38.213Z,1513229738.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:38.550Z,1513229738.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:38.564Z,1513229738.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:38.938Z,1513229738.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:38.956Z,1513229738.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:39.010Z,1513229739.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:39.320Z,1513229739.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:39.355Z,1513229739.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:39.413Z,1513229739.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:39.745Z,1513229739.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:39.760Z,1513229739.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:40.136Z,1513229740.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:40.152Z,1513229740.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:40.209Z,1513229740.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:40.536Z,1513229740.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:40.555Z,1513229740.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:40.919Z,1513229740.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:40.950Z,1513229740.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:41.005Z,1513229741.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:41.321Z,1513229741.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:41.352Z,1513229741.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:41.409Z,1513229741.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:41.721Z,1513229741.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:41.736Z,1513229741.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:42.128Z,1513229742.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:42.161Z,1513229742.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:42.205Z,1513229742.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:42.516Z,1513229742.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:42.532Z,1513229742.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:42.952Z,1513229742.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:42.967Z,1513229742.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:43.001Z,1513229743.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:43.338Z,1513229743.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:43.361Z,1513229743.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:43.405Z,1513229743.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:43.734Z,1513229743.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:43.765Z,1513229743.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:44.128Z,1513229744.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:44.144Z,1513229744.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:44.201Z,1513229744.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:44.523Z,1513229744.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:44.548Z,1513229744.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:44.974Z,1513229744.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:44.999Z,1513229744.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:45.052Z,1513229745.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:45.328Z,1513229745.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:45.343Z,1513229745.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:45.446Z,1513229745.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:45.738Z,1513229745.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:45.754Z,1513229745.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:46.138Z,1513229746.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:46.153Z,1513229746.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:46.241Z,1513229746.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:46.537Z,1513229746.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:46.552Z,1513229746.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:46.932Z,1513229746.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:46.947Z,1513229746.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:47.037Z,1513229747.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:47.319Z,1513229747.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:47.351Z,1513229747.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:47.441Z,1513229747.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:47.730Z,1513229747.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:47.753Z,1513229747.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:48.133Z,1513229748.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:48.148Z,1513229748.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:48.238Z,1513229748.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:48.519Z,1513229748.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:48.547Z,1513229748.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:48.939Z,1513229748.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:48.954Z,1513229748.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:49.034Z,1513229749.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:49.340Z,1513229749.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:49.391Z,1513229749.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:49.437Z,1513229749.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:49.742Z,1513229749.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:49.814Z,1513229749.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:50.123Z,1513229750.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:50.150Z,1513229750.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:50.234Z,1513229750.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:50.527Z,1513229750.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:50.554Z,1513229750.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:50.922Z,1513229750.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:50.967Z,1513229750.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:51.029Z,1513229751.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:51.319Z,1513229751.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:51.340Z,1513229751.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:51.433Z,1513229751.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:51.779Z,1513229751.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:51.827Z,1513229751.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:52.138Z,1513229752.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:52.174Z,1513229752.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:52.229Z,1513229752.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:52.537Z,1513229752.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:52.566Z,1513229752.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:52.929Z,1513229752.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:52.951Z,1513229752.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:53.025Z,1513229753.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:53.319Z,1513229753.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:53.355Z,1513229753.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:53.429Z,1513229753.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:53.723Z,1513229753.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:53.763Z,1513229753.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:54.128Z,1513229754.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:54.142Z,1513229754.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:54.225Z,1513229754.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:54.521Z,1513229754.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:54.535Z,1513229754.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:54.968Z,1513229754.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:54.991Z,1513229754.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:55.022Z,1513229755.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:55.342Z,1513229755.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:55.367Z,1513229755.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:55.425Z,1513229755.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:55.733Z,1513229755.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:55.770Z,1513229755.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:56.125Z,1513229756.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:56.140Z,1513229756.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:56.221Z,1513229756.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:56.525Z,1513229756.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:56.558Z,1513229756.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:56.934Z,1513229756.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:56.949Z,1513229756.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:57.017Z,1513229757.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:57.322Z,1513229757.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:57.354Z,1513229757.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:57.421Z,1513229757.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:57.733Z,1513229757.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:57.752Z,1513229757.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:58.159Z,1513229758.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:58.193Z,1513229758.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:58.217Z,1513229758.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:58.536Z,1513229758.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:58.554Z,1513229758.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:58.933Z,1513229758.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:59.014Z,1513229759.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:59.028Z,1513229759.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:59.320Z,1513229759.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:59.346Z,1513229759.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:35:59.421Z,1513229759.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:59.719Z,1513229759.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:35:59.755Z,1513229759.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:00.124Z,1513229760.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:00.176Z,1513229760.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:00.217Z,1513229760.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:00.523Z,1513229760.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:00.548Z,1513229760.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:00.938Z,1513229760.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:01.015Z,1513229761.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:01.026Z,1513229761.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:01.347Z,1513229761.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:01.375Z,1513229761.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:01.421Z,1513229761.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:01.730Z,1513229761.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:01.756Z,1513229761.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:02.120Z,1513229762.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:02.136Z,1513229762.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:02.217Z,1513229762.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:02.527Z,1513229762.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:02.542Z,1513229762.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:02.926Z,1513229762.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:02.967Z,1513229762.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:03.013Z,1513229763.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:03.331Z,1513229763.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:03.354Z,1513229763.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:03.417Z,1513229763.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:03.758Z,1513229763.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:03.773Z,1513229763.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:04.133Z,1513229764.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:04.148Z,1513229764.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:04.213Z,1513229764.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:04.572Z,1513229764.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:04.599Z,1513229764.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:04.919Z,1513229764.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:04.946Z,1513229764.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:05.009Z,1513229765.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:05.319Z,1513229765.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:05.350Z,1513229765.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:05.413Z,1513229765.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:05.719Z,1513229765.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:05.744Z,1513229765.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:06.120Z,1513229766.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:06.148Z,1513229766.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:06.209Z,1513229766.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:06.517Z,1513229766.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:06.540Z,1513229766.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:06.940Z,1513229766.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:06.955Z,1513229766.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:07.005Z,1513229767.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:07.336Z,1513229767.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:07.360Z,1513229767.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:07.409Z,1513229767.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:07.742Z,1513229767.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:07.760Z,1513229767.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:08.149Z,1513229768.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:08.172Z,1513229768.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:08.205Z,1513229768.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:08.526Z,1513229768.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:08.556Z,1513229768.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:08.927Z,1513229768.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:08.963Z,1513229768.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:09.001Z,1513229769.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:09.332Z,1513229769.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:09.372Z,1513229769.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:09.405Z,1513229769.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:09.738Z,1513229769.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:09.771Z,1513229769.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:10.137Z,1513229770.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:10.172Z,1513229770.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:10.201Z,1513229770.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:10.541Z,1513229770.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:10.576Z,1513229770.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:10.981Z,1513229770.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:11.005Z,1513229771.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:11.023Z,1513229771.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:11.327Z,1513229771.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:11.342Z,1513229771.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:11.409Z,1513229771.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:11.726Z,1513229771.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:11.741Z,1513229771.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:12.125Z,1513229772.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:12.183Z,1513229772.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:12.205Z,1513229772.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:12.528Z,1513229772.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:12.602Z,1513229772.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:12.935Z,1513229772.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:12.988Z,1513229772.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:13.003Z,1513229773.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:13.343Z,1513229773.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:13.392Z,1513229773.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:13.429Z,1513229773.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:13.748Z,1513229773.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:13.794Z,1513229773.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:14.151Z,1513229774.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:14.211Z,1513229774.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:14.233Z,1513229774.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:14.519Z,1513229774.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:14.558Z,1513229774.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:14.924Z,1513229774.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:14.972Z,1513229774.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:15.030Z,1513229775.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:15.326Z,1513229775.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:15.340Z,1513229775.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:15.433Z,1513229775.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:15.737Z,1513229775.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:15.766Z,1513229775.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:16.133Z,1513229776.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:16.164Z,1513229776.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:16.229Z,1513229776.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:16.538Z,1513229776.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:16.570Z,1513229776.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:16.926Z,1513229776.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:16.954Z,1513229776.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:17.025Z,1513229777.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:17.345Z,1513229777.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:17.372Z,1513229777.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:17.430Z,1513229777.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:17.729Z,1513229777.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:17.751Z,1513229777.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:18.129Z,1513229778.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:18.143Z,1513229778.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:18.226Z,1513229778.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:18.533Z,1513229778.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:18.548Z,1513229778.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:18.989Z,1513229778.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:19.012Z,1513229779.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:19.022Z,1513229779.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:19.346Z,1513229779.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:19.397Z,1513229779.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:19.425Z,1513229779.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:19.735Z,1513229779.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:19.771Z,1513229779.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:20.120Z,1513229780.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:20.174Z,1513229780.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:20.222Z,1513229780.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:20.563Z,1513229780.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:20.662Z,1513229780.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:20.926Z,1513229780.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:20.952Z,1513229780.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:21.019Z,1513229781.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:21.321Z,1513229781.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:21.362Z,1513229781.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:21.426Z,1513229781.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:21.740Z,1513229781.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:21.775Z,1513229781.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:22.144Z,1513229782.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:22.174Z,1513229782.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:22.221Z,1513229782.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:22.531Z,1513229782.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:22.697Z,1513229782.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:22.921Z,1513229782.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:22.967Z,1513229782.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:23.017Z,1513229783.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:23.323Z,1513229783.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:23.360Z,1513229783.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:23.422Z,1513229783.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:23.719Z,1513229783.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:23.762Z,1513229783.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:24.122Z,1513229784.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:24.175Z,1513229784.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:24.217Z,1513229784.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:24.528Z,1513229784.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:24.591Z,1513229784.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:24.940Z,1513229784.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:24.997Z,1513229784.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:25.013Z,1513229785.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:25.369Z,1513229785.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:25.417Z,1513229785.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:25.454Z,1513229785.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:26.214Z,1513229786.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:27.010Z,1513229787.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:27.421Z,1513229787.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:28.217Z,1513229788.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:29.015Z,1513229789.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:29.421Z,1513229789.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:29.567Z,1513229789.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:29.619Z,1513229789.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:29.727Z,1513229789.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:29.777Z,1513229789.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:30.086Z,1513229790.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:30.114Z,1513229790.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:30.217Z,1513229790.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:30.492Z,1513229790.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:30.570Z,1513229790.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:30.909Z,1513229790.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:30.964Z,1513229790.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:31.017Z,1513229791.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:31.317Z,1513229791.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:31.359Z,1513229791.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:31.422Z,1513229791.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:31.704Z,1513229791.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:31.735Z,1513229791.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:32.076Z,1513229792.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:32.143Z,1513229792.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:32.217Z,1513229792.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:32.477Z,1513229792.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:32.529Z,1513229792.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:32.876Z,1513229792.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:32.896Z,1513229792.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:33.038Z,1513229793.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:33.286Z,1513229793.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:33.342Z,1513229793.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:33.441Z,1513229793.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:33.701Z,1513229793.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:33.738Z,1513229793.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:34.091Z,1513229794.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:34.132Z,1513229794.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:34.238Z,1513229794.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:34.487Z,1513229794.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:34.575Z,1513229794.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:34.877Z,1513229794.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:34.919Z,1513229794.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:35.034Z,1513229795.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:35.300Z,1513229795.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:35.362Z,1513229795.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:35.438Z,1513229795.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:35.676Z,1513229795.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:35.764Z,1513229795.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:36.078Z,1513229796.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:36.115Z,1513229796.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:36.234Z,1513229796.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:36.478Z,1513229796.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:36.562Z,1513229796.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:36.936Z,1513229796.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:36.990Z,1513229796.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:37.029Z,1513229797.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:37.293Z,1513229797.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:37.308Z,1513229797.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:37.433Z,1513229797.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:37.698Z,1513229797.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:37.742Z,1513229797.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:38.076Z,1513229798.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:38.153Z,1513229798.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:38.231Z,1513229798.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:38.500Z,1513229798.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:38.551Z,1513229798.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:38.887Z,1513229798.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:38.910Z,1513229798.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:39.027Z,1513229799.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:39.277Z,1513229799.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:39.375Z,1513229799.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:39.430Z,1513229799.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:39.710Z,1513229799.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:39.735Z,1513229799.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:40.095Z,1513229800.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:40.132Z,1513229800.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:40.226Z,1513229800.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:40.488Z,1513229800.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:40.534Z,1513229800.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:40.904Z,1513229800.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:40.923Z,1513229800.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:41.022Z,1513229801.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:41.277Z,1513229801.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:41.316Z,1513229801.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:41.426Z,1513229801.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:41.677Z,1513229801.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:41.727Z,1513229801.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:42.105Z,1513229802.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:42.128Z,1513229802.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:42.229Z,1513229802.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:42.478Z,1513229802.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:42.534Z,1513229802.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:42.893Z,1513229802.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:42.943Z,1513229802.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:43.026Z,1513229803.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:43.297Z,1513229803.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:43.316Z,1513229803.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:43.429Z,1513229803.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:43.697Z,1513229803.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:43.716Z,1513229803.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:43.716Z,1513229803.716 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2017-12-14T05:36:43.716Z,1513229803.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:36:43.718Z,1513229803.718 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:43.718Z,1513229803.718 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102
2017-12-14T05:36:43.718Z,1513229803.718 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:36:43.720Z,1513229803.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:43.720Z,1513229803.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2017-12-14T05:36:43.720Z,1513229803.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:36:43.802Z,1513229803.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:36:43.802Z,1513229803.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:36:43.802Z,1513229803.802 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:36:44.086Z,1513229804.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:44.139Z,1513229804.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:36:44.139Z,1513229804.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2017-12-14T05:36:44.140Z,1513229804.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:36:44.140Z,1513229804.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102
2017-12-14T05:36:44.140Z,1513229804.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:36:44.140Z,1513229804.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2017-12-14T05:36:44.225Z,1513229804.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:44.482Z,1513229804.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:44.496Z,1513229804.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:36:44.497Z,1513229804.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:36:44.497Z,1513229804.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:36:44.498Z,1513229804.498 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:36:44.498Z,1513229804.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:36:44.498Z,1513229804.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:36:44.499Z,1513229804.499 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:36:44.499Z,1513229804.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:36:44.500Z,1513229804.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:36:44.887Z,1513229804.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:44.951Z,1513229804.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:45.021Z,1513229805.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:45.286Z,1513229805.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:45.313Z,1513229805.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:45.425Z,1513229805.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:45.690Z,1513229805.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:45.707Z,1513229805.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:46.094Z,1513229806.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:46.131Z,1513229806.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:46.221Z,1513229806.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:46.494Z,1513229806.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:46.508Z,1513229806.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:46.885Z,1513229806.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:46.903Z,1513229806.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:47.018Z,1513229807.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:47.275Z,1513229807.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:47.303Z,1513229807.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:47.421Z,1513229807.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:47.686Z,1513229807.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:47.703Z,1513229807.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:48.089Z,1513229808.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:48.104Z,1513229808.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:48.217Z,1513229808.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:48.482Z,1513229808.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:48.503Z,1513229808.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:48.910Z,1513229808.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:48.945Z,1513229808.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:49.013Z,1513229809.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:49.298Z,1513229809.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:49.319Z,1513229809.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:49.417Z,1513229809.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:49.693Z,1513229809.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:49.709Z,1513229809.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:50.102Z,1513229810.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:50.142Z,1513229810.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:50.213Z,1513229810.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:50.485Z,1513229810.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:50.499Z,1513229810.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:50.882Z,1513229810.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:50.905Z,1513229810.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:51.009Z,1513229811.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:51.279Z,1513229811.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:51.311Z,1513229811.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:51.413Z,1513229811.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:51.698Z,1513229811.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:51.713Z,1513229811.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:52.097Z,1513229812.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:52.113Z,1513229812.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:52.209Z,1513229812.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:52.493Z,1513229812.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:52.515Z,1513229812.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:52.882Z,1513229812.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:52.907Z,1513229812.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:53.005Z,1513229813.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:53.316Z,1513229813.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:53.356Z,1513229813.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:53.410Z,1513229813.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:53.675Z,1513229813.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:53.711Z,1513229813.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:54.080Z,1513229814.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:54.107Z,1513229814.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:54.205Z,1513229814.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:54.490Z,1513229814.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:54.506Z,1513229814.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:54.889Z,1513229814.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:54.921Z,1513229814.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:55.003Z,1513229815.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:55.312Z,1513229815.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:55.335Z,1513229815.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:55.702Z,1513229815.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:55.731Z,1513229815.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:55.797Z,1513229815.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:56.082Z,1513229816.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:56.097Z,1513229816.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:56.514Z,1513229816.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:56.556Z,1513229816.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:56.594Z,1513229816.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:56.886Z,1513229816.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:56.942Z,1513229816.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:57.284Z,1513229817.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:57.358Z,1513229817.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:57.389Z,1513229817.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:57.699Z,1513229817.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:57.714Z,1513229817.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:58.099Z,1513229818.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:58.150Z,1513229818.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:58.185Z,1513229818.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:58.494Z,1513229818.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:58.509Z,1513229818.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:58.875Z,1513229818.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:58.935Z,1513229818.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:58.981Z,1513229818.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:59.275Z,1513229819.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:59.307Z,1513229819.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:59.385Z,1513229819.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:59.699Z,1513229819.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:36:59.723Z,1513229819.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:36:59.789Z,1513229819.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:00.077Z,1513229820.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:00.115Z,1513229820.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:00.193Z,1513229820.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:00.473Z,1513229820.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:00.510Z,1513229820.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:00.894Z,1513229820.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:00.912Z,1513229820.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:00.989Z,1513229820.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:01.338Z,1513229821.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:01.370Z,1513229821.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:01.393Z,1513229821.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:01.694Z,1513229821.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:01.718Z,1513229821.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:02.082Z,1513229822.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:02.097Z,1513229822.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:02.189Z,1513229822.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:02.472Z,1513229822.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:02.488Z,1513229822.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:02.900Z,1513229822.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:02.925Z,1513229822.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:02.986Z,1513229822.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:03.284Z,1513229823.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:03.324Z,1513229823.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:03.389Z,1513229823.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:03.664Z,1513229823.664 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:37:03.664Z,1513229823.664 [NAL9602] Data Fault, FailCount= 3
2017-12-14T05:37:03.664Z,1513229823.664 [NAL9602](ERROR): Data Fault
2017-12-14T05:37:03.681Z,1513229823.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:03.695Z,1513229823.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:03.733Z,1513229823.733 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:37:04.079Z,1513229824.079 [NAL9602](INFO): Powering down
2017-12-14T05:37:04.096Z,1513229824.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:04.127Z,1513229824.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:04.185Z,1513229824.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:04.484Z,1513229824.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:04.498Z,1513229824.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:04.882Z,1513229824.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:04.896Z,1513229824.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:04.933Z,1513229824.933 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T05:37:04.934Z,1513229824.934 [NAL9602] No Fault, FailCount= 3
2017-12-14T05:37:04.982Z,1513229824.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:05.278Z,1513229825.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:05.297Z,1513229825.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:05.385Z,1513229825.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:05.682Z,1513229825.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:05.696Z,1513229825.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:06.106Z,1513229826.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:06.162Z,1513229826.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:06.181Z,1513229826.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:06.487Z,1513229826.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:06.502Z,1513229826.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:06.884Z,1513229826.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:06.898Z,1513229826.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:06.977Z,1513229826.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:07.288Z,1513229827.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:07.328Z,1513229827.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:07.381Z,1513229827.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:07.688Z,1513229827.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:07.711Z,1513229827.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:08.086Z,1513229828.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:08.100Z,1513229828.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:08.177Z,1513229828.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:08.487Z,1513229828.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:08.501Z,1513229828.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:08.888Z,1513229828.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:08.903Z,1513229828.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:08.975Z,1513229828.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:09.336Z,1513229829.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:09.392Z,1513229829.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:09.429Z,1513229829.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:09.672Z,1513229829.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:09.704Z,1513229829.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:10.087Z,1513229830.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:10.102Z,1513229830.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:10.225Z,1513229830.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:10.483Z,1513229830.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:10.498Z,1513229830.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:10.872Z,1513229830.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:10.897Z,1513229830.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:11.022Z,1513229831.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:11.280Z,1513229831.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:11.306Z,1513229831.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:11.425Z,1513229831.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:11.674Z,1513229831.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:11.775Z,1513229831.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:12.072Z,1513229832.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:12.110Z,1513229832.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:12.221Z,1513229832.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:12.498Z,1513229832.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:12.535Z,1513229832.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:12.881Z,1513229832.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:12.895Z,1513229832.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:13.017Z,1513229833.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:13.284Z,1513229833.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:13.298Z,1513229833.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:13.421Z,1513229833.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:13.680Z,1513229833.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:13.696Z,1513229833.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:14.079Z,1513229834.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:14.103Z,1513229834.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:14.217Z,1513229834.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:14.484Z,1513229834.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:14.499Z,1513229834.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:14.882Z,1513229834.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:14.905Z,1513229834.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:15.013Z,1513229835.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:15.278Z,1513229835.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:15.311Z,1513229835.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:15.419Z,1513229835.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:15.689Z,1513229835.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:15.707Z,1513229835.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:16.084Z,1513229836.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:16.103Z,1513229836.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:16.213Z,1513229836.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:16.484Z,1513229836.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:16.499Z,1513229836.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:16.892Z,1513229836.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:16.906Z,1513229836.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:17.009Z,1513229837.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:17.278Z,1513229837.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:17.315Z,1513229837.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:17.413Z,1513229837.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:17.676Z,1513229837.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:17.703Z,1513229837.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:18.089Z,1513229838.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:18.104Z,1513229838.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:18.209Z,1513229838.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:18.486Z,1513229838.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:18.509Z,1513229838.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:18.926Z,1513229838.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:19.006Z,1513229839.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:19.018Z,1513229839.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:19.274Z,1513229839.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:19.320Z,1513229839.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:19.409Z,1513229839.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:19.675Z,1513229839.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:19.708Z,1513229839.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:20.077Z,1513229840.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:20.112Z,1513229840.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:20.205Z,1513229840.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:20.479Z,1513229840.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:20.523Z,1513229840.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:20.875Z,1513229840.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:20.913Z,1513229840.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:21.002Z,1513229841.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:21.274Z,1513229841.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:21.320Z,1513229841.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:21.405Z,1513229841.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:21.678Z,1513229841.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:21.711Z,1513229841.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:22.075Z,1513229842.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:22.171Z,1513229842.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:22.202Z,1513229842.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:22.486Z,1513229842.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:22.500Z,1513229842.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:22.880Z,1513229842.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:22.895Z,1513229842.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:22.999Z,1513229842.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:23.291Z,1513229843.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:23.327Z,1513229843.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:23.405Z,1513229843.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:23.682Z,1513229843.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:23.697Z,1513229843.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:24.082Z,1513229844.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:24.096Z,1513229844.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:24.201Z,1513229844.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:24.486Z,1513229844.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:24.501Z,1513229844.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:24.887Z,1513229844.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:24.901Z,1513229844.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:24.999Z,1513229844.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:25.310Z,1513229845.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:25.358Z,1513229845.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:25.425Z,1513229845.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:25.683Z,1513229845.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:25.698Z,1513229845.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:26.221Z,1513229846.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:27.018Z,1513229847.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:27.421Z,1513229847.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:29.168Z,1513229849.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:29.183Z,1513229849.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:29.290Z,1513229849.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:29.304Z,1513229849.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:29.644Z,1513229849.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:29.703Z,1513229849.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:30.044Z,1513229850.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:30.059Z,1513229850.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:30.444Z,1513229850.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:30.459Z,1513229850.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:30.845Z,1513229850.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:30.860Z,1513229850.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:31.241Z,1513229851.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:31.262Z,1513229851.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:31.644Z,1513229851.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:31.660Z,1513229851.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:32.044Z,1513229852.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:32.063Z,1513229852.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:32.442Z,1513229852.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:32.456Z,1513229852.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:32.832Z,1513229852.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:32.858Z,1513229852.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:33.231Z,1513229853.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:33.274Z,1513229853.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:33.648Z,1513229853.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:33.663Z,1513229853.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:34.032Z,1513229854.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:34.059Z,1513229854.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:34.206Z,1513229854.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:34.415Z,1513229854.415 [NAL9602](INFO): Powering up NAL9602
2017-12-14T05:37:34.432Z,1513229854.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:34.470Z,1513229854.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:34.855Z,1513229854.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:34.885Z,1513229854.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:35.002Z,1513229855.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:35.242Z,1513229855.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:35.273Z,1513229855.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:35.405Z,1513229855.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:35.642Z,1513229855.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:35.657Z,1513229855.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:36.039Z,1513229856.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:36.054Z,1513229856.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:36.201Z,1513229856.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:36.447Z,1513229856.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:36.462Z,1513229856.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:36.848Z,1513229856.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:36.867Z,1513229856.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:37.004Z,1513229857.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:37.247Z,1513229857.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:37.262Z,1513229857.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:37.413Z,1513229857.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:37.643Z,1513229857.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:37.658Z,1513229857.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:38.072Z,1513229858.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:38.118Z,1513229858.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:38.210Z,1513229858.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:38.441Z,1513229858.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:38.464Z,1513229858.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:38.846Z,1513229858.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:38.861Z,1513229858.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:39.007Z,1513229859.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:39.232Z,1513229859.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:39.259Z,1513229859.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:39.417Z,1513229859.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:39.631Z,1513229859.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:39.665Z,1513229859.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:40.048Z,1513229860.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:40.064Z,1513229860.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:40.442Z,1513229860.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:40.463Z,1513229860.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:40.852Z,1513229860.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:40.902Z,1513229860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:41.252Z,1513229861.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:41.284Z,1513229861.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:41.635Z,1513229861.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:41.692Z,1513229861.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:42.031Z,1513229862.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:42.095Z,1513229862.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:42.439Z,1513229862.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:42.478Z,1513229862.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:42.838Z,1513229862.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:42.891Z,1513229862.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:43.240Z,1513229863.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:43.266Z,1513229863.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:43.632Z,1513229863.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:43.683Z,1513229863.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:44.043Z,1513229864.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:44.073Z,1513229864.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:44.467Z,1513229864.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:44.481Z,1513229864.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:44.844Z,1513229864.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:44.875Z,1513229864.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:45.256Z,1513229865.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:45.271Z,1513229865.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:45.630Z,1513229865.630 [NAL9602](INFO): NAL9602 initialized
2017-12-14T05:37:45.645Z,1513229865.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:45.674Z,1513229865.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:46.037Z,1513229866.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:46.074Z,1513229866.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:46.450Z,1513229866.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:46.483Z,1513229866.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:46.864Z,1513229866.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:46.878Z,1513229866.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:47.253Z,1513229867.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:47.280Z,1513229867.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:47.686Z,1513229867.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:47.726Z,1513229867.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:48.045Z,1513229868.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:48.060Z,1513229868.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:48.446Z,1513229868.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:48.461Z,1513229868.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:48.858Z,1513229868.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:48.888Z,1513229868.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:49.251Z,1513229869.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:49.287Z,1513229869.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:49.652Z,1513229869.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:49.668Z,1513229869.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:50.044Z,1513229870.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:50.063Z,1513229870.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:50.202Z,1513229870.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:50.441Z,1513229870.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:50.459Z,1513229870.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:50.871Z,1513229870.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:50.899Z,1513229870.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:50.000Z,1513229871.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:51.261Z,1513229871.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:51.276Z,1513229871.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:51.417Z,1513229871.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:51.636Z,1513229871.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:51.665Z,1513229871.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:52.054Z,1513229872.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:52.108Z,1513229872.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:52.522Z,1513229872.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:52.557Z,1513229872.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:52.854Z,1513229872.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:52.869Z,1513229872.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:53.248Z,1513229873.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:53.263Z,1513229873.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:53.649Z,1513229873.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:53.671Z,1513229873.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:54.053Z,1513229874.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:54.067Z,1513229874.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:54.435Z,1513229874.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:54.463Z,1513229874.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:54.854Z,1513229874.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:54.869Z,1513229874.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:55.261Z,1513229875.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:55.276Z,1513229875.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:55.661Z,1513229875.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:55.676Z,1513229875.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:56.050Z,1513229876.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:56.071Z,1513229876.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:56.449Z,1513229876.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:56.463Z,1513229876.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:56.832Z,1513229876.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:56.859Z,1513229876.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:57.256Z,1513229877.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:57.287Z,1513229877.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:57.635Z,1513229877.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:57.673Z,1513229877.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:58.039Z,1513229878.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:58.062Z,1513229878.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:58.464Z,1513229878.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:58.479Z,1513229878.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:58.856Z,1513229878.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:58.879Z,1513229878.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:59.241Z,1513229879.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:59.256Z,1513229879.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:37:59.642Z,1513229879.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:37:59.658Z,1513229879.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:00.042Z,1513229880.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:00.056Z,1513229880.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:00.471Z,1513229880.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:00.495Z,1513229880.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:00.854Z,1513229880.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:00.885Z,1513229880.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:01.259Z,1513229881.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:01.295Z,1513229881.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:01.647Z,1513229881.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:01.668Z,1513229881.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:02.046Z,1513229882.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:02.061Z,1513229882.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:02.450Z,1513229882.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:02.471Z,1513229882.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:02.844Z,1513229882.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:02.867Z,1513229882.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:03.242Z,1513229883.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:03.267Z,1513229883.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:03.643Z,1513229883.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:03.666Z,1513229883.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:04.054Z,1513229884.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:04.127Z,1513229884.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:04.458Z,1513229884.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:04.474Z,1513229884.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:04.853Z,1513229884.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:04.900Z,1513229884.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:05.257Z,1513229885.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:05.273Z,1513229885.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:05.629Z,1513229885.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:05.691Z,1513229885.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:06.037Z,1513229886.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:06.064Z,1513229886.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:06.435Z,1513229886.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:06.461Z,1513229886.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:06.900Z,1513229886.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:06.919Z,1513229886.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:07.257Z,1513229887.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:07.282Z,1513229887.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:07.661Z,1513229887.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:07.684Z,1513229887.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:08.037Z,1513229888.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:08.056Z,1513229888.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:08.444Z,1513229888.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:08.459Z,1513229888.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:08.858Z,1513229888.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:08.882Z,1513229888.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:09.240Z,1513229889.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:09.259Z,1513229889.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:09.666Z,1513229889.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:09.772Z,1513229889.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:10.051Z,1513229890.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:10.070Z,1513229890.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:10.454Z,1513229890.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:10.469Z,1513229890.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:10.844Z,1513229890.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:10.863Z,1513229890.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:11.249Z,1513229891.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:11.263Z,1513229891.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:11.631Z,1513229891.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:11.674Z,1513229891.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:12.058Z,1513229892.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:12.073Z,1513229892.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:12.458Z,1513229892.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:12.473Z,1513229892.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:12.854Z,1513229892.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:12.869Z,1513229892.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:13.257Z,1513229893.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:13.297Z,1513229893.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:13.636Z,1513229893.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:13.662Z,1513229893.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:14.038Z,1513229894.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:14.102Z,1513229894.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:14.432Z,1513229894.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:14.464Z,1513229894.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:14.858Z,1513229894.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:14.873Z,1513229894.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:15.265Z,1513229895.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:15.280Z,1513229895.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:15.662Z,1513229895.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:15.714Z,1513229895.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:16.031Z,1513229896.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:16.062Z,1513229896.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:16.454Z,1513229896.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:16.486Z,1513229896.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:16.840Z,1513229896.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:16.871Z,1513229896.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:17.237Z,1513229897.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:17.264Z,1513229897.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:17.639Z,1513229897.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:17.655Z,1513229897.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:18.048Z,1513229898.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:18.063Z,1513229898.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:18.450Z,1513229898.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:18.473Z,1513229898.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:18.850Z,1513229898.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:18.864Z,1513229898.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:19.241Z,1513229899.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:19.256Z,1513229899.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:19.648Z,1513229899.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:19.662Z,1513229899.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:20.043Z,1513229900.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:20.071Z,1513229900.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:20.443Z,1513229900.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:20.469Z,1513229900.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:20.857Z,1513229900.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:20.872Z,1513229900.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:21.259Z,1513229901.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:21.286Z,1513229901.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:21.657Z,1513229901.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:21.679Z,1513229901.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:22.040Z,1513229902.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:22.068Z,1513229902.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:22.432Z,1513229902.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:22.467Z,1513229902.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:22.844Z,1513229902.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:22.871Z,1513229902.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:23.236Z,1513229903.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:23.270Z,1513229903.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:23.639Z,1513229903.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:23.673Z,1513229903.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:24.054Z,1513229904.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:24.089Z,1513229904.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:24.454Z,1513229904.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:24.470Z,1513229904.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:24.853Z,1513229904.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:24.877Z,1513229904.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:25.248Z,1513229905.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:25.263Z,1513229905.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:25.648Z,1513229905.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:25.714Z,1513229905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:26.054Z,1513229906.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:26.119Z,1513229906.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:29.520Z,1513229909.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:29.536Z,1513229909.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:29.655Z,1513229909.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:29.675Z,1513229909.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:30.038Z,1513229910.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:30.091Z,1513229910.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:30.441Z,1513229910.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:30.465Z,1513229910.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:30.821Z,1513229910.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:30.892Z,1513229910.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:31.225Z,1513229911.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:31.262Z,1513229911.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:31.677Z,1513229911.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:31.714Z,1513229911.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:32.027Z,1513229912.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:32.068Z,1513229912.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:32.458Z,1513229912.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:32.473Z,1513229912.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:32.845Z,1513229912.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:32.869Z,1513229912.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:33.231Z,1513229913.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:33.261Z,1513229913.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:33.631Z,1513229913.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:33.645Z,1513229913.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:34.030Z,1513229914.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:34.052Z,1513229914.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:34.422Z,1513229914.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:34.445Z,1513229914.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:34.842Z,1513229914.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:34.872Z,1513229914.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:35.249Z,1513229915.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:35.281Z,1513229915.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:35.647Z,1513229915.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:35.669Z,1513229915.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:36.034Z,1513229916.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:36.050Z,1513229916.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:36.434Z,1513229916.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:36.475Z,1513229916.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:36.827Z,1513229916.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:36.858Z,1513229916.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:37.226Z,1513229917.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:37.254Z,1513229917.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:37.634Z,1513229917.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:37.648Z,1513229917.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:38.037Z,1513229918.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:38.065Z,1513229918.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:38.449Z,1513229918.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:38.464Z,1513229918.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:38.845Z,1513229918.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:38.859Z,1513229918.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:39.260Z,1513229919.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:39.315Z,1513229919.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:39.625Z,1513229919.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:39.650Z,1513229919.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:40.039Z,1513229920.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:40.059Z,1513229920.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:40.423Z,1513229920.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:40.463Z,1513229920.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:40.856Z,1513229920.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:40.870Z,1513229920.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:41.245Z,1513229921.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:41.282Z,1513229921.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:41.647Z,1513229921.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:41.667Z,1513229921.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:42.023Z,1513229922.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:42.060Z,1513229922.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:42.416Z,1513229922.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:42.514Z,1513229922.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:42.843Z,1513229922.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:42.859Z,1513229922.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:43.225Z,1513229923.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:43.260Z,1513229923.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:43.650Z,1513229923.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:43.665Z,1513229923.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:44.039Z,1513229924.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:44.068Z,1513229924.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:44.444Z,1513229924.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:44.458Z,1513229924.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:44.822Z,1513229924.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:44.855Z,1513229924.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:45.227Z,1513229925.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:45.267Z,1513229925.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:45.669Z,1513229925.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:45.727Z,1513229925.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:46.025Z,1513229926.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:46.063Z,1513229926.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:46.425Z,1513229926.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:46.453Z,1513229926.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:46.849Z,1513229926.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:46.863Z,1513229926.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:47.247Z,1513229927.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:47.262Z,1513229927.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:47.648Z,1513229927.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:47.662Z,1513229927.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:48.027Z,1513229928.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:48.054Z,1513229928.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:48.419Z,1513229928.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:48.460Z,1513229928.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:48.854Z,1513229928.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:48.883Z,1513229928.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:49.224Z,1513229929.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:49.251Z,1513229929.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:49.642Z,1513229929.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:49.657Z,1513229929.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:50.044Z,1513229930.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:50.063Z,1513229930.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:50.448Z,1513229930.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:50.463Z,1513229930.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:50.833Z,1513229930.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:50.855Z,1513229930.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:51.237Z,1513229931.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:51.311Z,1513229931.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:51.642Z,1513229931.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:51.663Z,1513229931.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:52.022Z,1513229932.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:52.085Z,1513229932.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:52.424Z,1513229932.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:52.450Z,1513229932.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:52.838Z,1513229932.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:52.892Z,1513229932.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:53.249Z,1513229933.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:53.263Z,1513229933.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:53.649Z,1513229933.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:53.663Z,1513229933.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:54.033Z,1513229934.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:54.055Z,1513229934.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:54.436Z,1513229934.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:54.455Z,1513229934.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:54.820Z,1513229934.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:54.854Z,1513229934.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:55.219Z,1513229935.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:55.275Z,1513229935.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:55.642Z,1513229935.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:55.663Z,1513229935.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:56.030Z,1513229936.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:56.056Z,1513229936.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:56.430Z,1513229936.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:56.469Z,1513229936.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:56.819Z,1513229936.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:56.852Z,1513229936.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:57.226Z,1513229937.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:57.232Z,1513229937.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x8932 got:0x424
2017-12-14T05:38:57.259Z,1513229937.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:57.627Z,1513229937.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:57.652Z,1513229937.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:58.022Z,1513229938.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:58.070Z,1513229938.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:58.489Z,1513229938.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:58.521Z,1513229938.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:58.861Z,1513229938.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:58.883Z,1513229938.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:59.252Z,1513229939.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:59.267Z,1513229939.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:38:59.648Z,1513229939.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:38:59.663Z,1513229939.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:00.035Z,1513229940.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:00.056Z,1513229940.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:00.434Z,1513229940.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:00.459Z,1513229940.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:00.827Z,1513229940.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:00.861Z,1513229940.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:01.226Z,1513229941.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:01.287Z,1513229941.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:01.685Z,1513229941.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:01.720Z,1513229941.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:02.038Z,1513229942.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:02.060Z,1513229942.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:02.444Z,1513229942.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:02.459Z,1513229942.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:02.825Z,1513229942.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:02.870Z,1513229942.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:03.228Z,1513229943.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:03.260Z,1513229943.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:03.631Z,1513229943.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:03.659Z,1513229943.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:04.031Z,1513229944.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:04.061Z,1513229944.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:04.426Z,1513229944.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:04.466Z,1513229944.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:04.906Z,1513229944.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:04.912Z,1513229944.912 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:39:04.959Z,1513229944.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:05.250Z,1513229945.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:05.265Z,1513229945.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:05.650Z,1513229945.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:05.671Z,1513229945.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:06.023Z,1513229946.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:06.063Z,1513229946.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:06.432Z,1513229946.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:06.461Z,1513229946.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:06.832Z,1513229946.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:06.926Z,1513229946.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:07.235Z,1513229947.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:07.264Z,1513229947.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:07.649Z,1513229947.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:07.675Z,1513229947.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:07.689Z,1513229947.689 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:39:08.064Z,1513229948.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:08.084Z,1513229948.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:08.441Z,1513229948.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:08.475Z,1513229948.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:08.843Z,1513229948.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:08.869Z,1513229948.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:09.224Z,1513229949.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:09.260Z,1513229949.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:09.633Z,1513229949.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:09.648Z,1513229949.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:10.034Z,1513229950.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:10.057Z,1513229950.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:10.438Z,1513229950.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:10.453Z,1513229950.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:10.832Z,1513229950.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:10.854Z,1513229950.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:11.250Z,1513229951.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:11.289Z,1513229951.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:11.644Z,1513229951.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:11.659Z,1513229951.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:12.032Z,1513229952.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:12.059Z,1513229952.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:12.419Z,1513229952.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:12.460Z,1513229952.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:12.824Z,1513229952.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:12.850Z,1513229952.850 [PNI_TCM](ERROR): CRC does not match. Expected:0x20883 got:0x16701
2017-12-14T05:39:12.868Z,1513229952.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:13.234Z,1513229953.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:13.298Z,1513229953.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:13.631Z,1513229953.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:13.676Z,1513229953.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:14.038Z,1513229954.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:14.067Z,1513229954.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:14.467Z,1513229954.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:14.507Z,1513229954.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:14.824Z,1513229954.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:14.874Z,1513229954.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:15.224Z,1513229955.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:15.259Z,1513229955.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:15.620Z,1513229955.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:15.696Z,1513229955.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:16.027Z,1513229956.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:16.058Z,1513229956.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:16.206Z,1513229956.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:16.426Z,1513229956.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:16.455Z,1513229956.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:16.842Z,1513229956.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:16.858Z,1513229956.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:17.007Z,1513229957.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:17.242Z,1513229957.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:17.274Z,1513229957.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:17.413Z,1513229957.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:17.664Z,1513229957.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:17.703Z,1513229957.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:18.038Z,1513229958.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:18.070Z,1513229958.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:18.431Z,1513229958.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:18.446Z,1513229958.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:18.829Z,1513229958.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:18.871Z,1513229958.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:19.237Z,1513229959.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:19.244Z,1513229959.244 [PNI_TCM](ERROR): CRC does not match. Expected:0x12518 got:0x249
2017-12-14T05:39:19.275Z,1513229959.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:19.642Z,1513229959.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:19.682Z,1513229959.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:20.042Z,1513229960.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:20.066Z,1513229960.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:20.448Z,1513229960.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:20.479Z,1513229960.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:20.855Z,1513229960.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:20.887Z,1513229960.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:21.234Z,1513229961.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:21.267Z,1513229961.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:21.636Z,1513229961.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:21.673Z,1513229961.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:22.026Z,1513229962.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:22.051Z,1513229962.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:22.434Z,1513229962.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:22.449Z,1513229962.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:22.834Z,1513229962.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:22.855Z,1513229962.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:23.245Z,1513229963.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:23.277Z,1513229963.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:23.655Z,1513229963.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:23.719Z,1513229963.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:24.053Z,1513229964.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:24.084Z,1513229964.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:24.428Z,1513229964.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:24.481Z,1513229964.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:24.835Z,1513229964.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:24.867Z,1513229964.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:25.223Z,1513229965.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:25.256Z,1513229965.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:25.646Z,1513229965.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:25.669Z,1513229965.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:26.045Z,1513229966.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:26.068Z,1513229966.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:26.437Z,1513229966.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:26.465Z,1513229966.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:29.923Z,1513229969.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:29.939Z,1513229969.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:30.043Z,1513229970.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:30.068Z,1513229970.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:30.218Z,1513229970.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:30.443Z,1513229970.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:30.472Z,1513229970.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:30.841Z,1513229970.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:30.875Z,1513229970.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:31.015Z,1513229971.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:31.242Z,1513229971.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:31.262Z,1513229971.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:31.421Z,1513229971.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:31.624Z,1513229971.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:31.666Z,1513229971.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:32.029Z,1513229972.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:32.039Z,1513229972.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x49807 got:0x47132
2017-12-14T05:39:32.075Z,1513229972.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:32.430Z,1513229972.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:32.444Z,1513229972.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:32.846Z,1513229972.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:32.869Z,1513229972.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:33.240Z,1513229973.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:33.265Z,1513229973.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:33.641Z,1513229973.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:33.664Z,1513229973.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:34.038Z,1513229974.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:34.067Z,1513229974.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:34.436Z,1513229974.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:34.459Z,1513229974.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:34.830Z,1513229974.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:34.869Z,1513229974.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:35.233Z,1513229975.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:35.248Z,1513229975.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:35.636Z,1513229975.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:35.726Z,1513229975.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:36.038Z,1513229976.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:36.052Z,1513229976.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:36.444Z,1513229976.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:36.491Z,1513229976.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:36.848Z,1513229976.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:36.934Z,1513229976.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:37.235Z,1513229977.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:37.290Z,1513229977.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:37.631Z,1513229977.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:37.652Z,1513229977.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:38.031Z,1513229978.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:38.053Z,1513229978.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:38.436Z,1513229978.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:38.455Z,1513229978.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:38.843Z,1513229978.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:38.863Z,1513229978.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:39.242Z,1513229979.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:39.256Z,1513229979.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:39.645Z,1513229979.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:39.660Z,1513229979.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:40.053Z,1513229980.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:40.083Z,1513229980.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:40.424Z,1513229980.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:40.450Z,1513229980.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:40.825Z,1513229980.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:40.851Z,1513229980.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:41.226Z,1513229981.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:41.268Z,1513229981.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:41.652Z,1513229981.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:41.667Z,1513229981.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:42.050Z,1513229982.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:42.064Z,1513229982.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:42.449Z,1513229982.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:42.471Z,1513229982.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:42.824Z,1513229982.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:42.863Z,1513229982.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:43.262Z,1513229983.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:43.305Z,1513229983.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:43.638Z,1513229983.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:43.662Z,1513229983.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.032Z,1513229984.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:44.064Z,1513229984.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.205Z,1513229984.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:44.419Z,1513229984.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:44.463Z,1513229984.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.852Z,1513229984.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:44.867Z,1513229984.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.867Z,1513229984.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2017-12-14T05:39:44.867Z,1513229984.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:39:44.869Z,1513229984.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.869Z,1513229984.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103
2017-12-14T05:39:44.869Z,1513229984.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:39:44.871Z,1513229984.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:44.871Z,1513229984.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2017-12-14T05:39:44.871Z,1513229984.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:39:44.883Z,1513229984.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:39:44.883Z,1513229984.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:39:44.884Z,1513229984.884 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:39:45.003Z,1513229985.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:45.240Z,1513229985.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:45.281Z,1513229985.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:39:45.281Z,1513229985.281 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2017-12-14T05:39:45.282Z,1513229985.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:39:45.282Z,1513229985.282 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103
2017-12-14T05:39:45.282Z,1513229985.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:39:45.282Z,1513229985.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2017-12-14T05:39:45.425Z,1513229985.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:45.644Z,1513229985.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:45.690Z,1513229985.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:39:45.690Z,1513229985.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:39:45.690Z,1513229985.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:39:45.691Z,1513229985.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:39:45.691Z,1513229985.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:39:45.692Z,1513229985.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:39:45.692Z,1513229985.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:39:45.692Z,1513229985.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:39:45.693Z,1513229985.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:39:46.020Z,1513229986.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:46.059Z,1513229986.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:46.221Z,1513229986.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:46.428Z,1513229986.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:46.487Z,1513229986.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:46.824Z,1513229986.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:46.858Z,1513229986.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:47.017Z,1513229987.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:47.244Z,1513229987.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:47.259Z,1513229987.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:47.421Z,1513229987.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:47.645Z,1513229987.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:47.672Z,1513229987.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:48.053Z,1513229988.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:48.068Z,1513229988.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:48.436Z,1513229988.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:48.462Z,1513229988.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:48.835Z,1513229988.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:48.858Z,1513229988.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:49.219Z,1513229989.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:49.270Z,1513229989.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:49.623Z,1513229989.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:49.714Z,1513229989.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:50.031Z,1513229990.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:50.052Z,1513229990.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:50.426Z,1513229990.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:50.458Z,1513229990.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:50.830Z,1513229990.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:50.857Z,1513229990.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:51.252Z,1513229991.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:51.271Z,1513229991.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:51.639Z,1513229991.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:51.662Z,1513229991.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:52.024Z,1513229992.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:52.066Z,1513229992.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:52.420Z,1513229992.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:52.460Z,1513229992.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:52.856Z,1513229992.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:52.887Z,1513229992.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:53.226Z,1513229993.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:53.248Z,1513229993.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:53.650Z,1513229993.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:53.677Z,1513229993.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:54.036Z,1513229994.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:54.057Z,1513229994.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:54.442Z,1513229994.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:54.457Z,1513229994.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:54.832Z,1513229994.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:54.852Z,1513229994.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:55.230Z,1513229995.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:55.259Z,1513229995.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:55.616Z,1513229995.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:55.660Z,1513229995.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:56.046Z,1513229996.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:56.053Z,1513229996.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x22693 got:0x23044
2017-12-14T05:39:56.100Z,1513229996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:56.425Z,1513229996.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:56.452Z,1513229996.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:56.849Z,1513229996.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:56.871Z,1513229996.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:57.248Z,1513229997.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:57.264Z,1513229997.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:57.646Z,1513229997.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:57.703Z,1513229997.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:58.028Z,1513229998.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:58.072Z,1513229998.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:58.201Z,1513229998.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:58.426Z,1513229998.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:58.453Z,1513229998.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:58.825Z,1513229998.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:58.898Z,1513229998.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:58.999Z,1513229998.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:59.229Z,1513229999.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:59.275Z,1513229999.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:39:59.422Z,1513229999.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:59.636Z,1513229999.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:39:59.679Z,1513229999.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:00.048Z,1513230000.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:00.063Z,1513230000.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:00.218Z,1513230000.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:00.447Z,1513230000.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:00.462Z,1513230000.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:00.829Z,1513230000.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:00.859Z,1513230000.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:01.014Z,1513230001.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:01.230Z,1513230001.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:01.244Z,1513230001.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:01.417Z,1513230001.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:01.630Z,1513230001.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:01.646Z,1513230001.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:02.024Z,1513230002.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:02.049Z,1513230002.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:02.458Z,1513230002.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:02.490Z,1513230002.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:02.833Z,1513230002.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:02.848Z,1513230002.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:03.245Z,1513230003.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:03.267Z,1513230003.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:03.647Z,1513230003.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:03.675Z,1513230003.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:04.027Z,1513230004.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:04.046Z,1513230004.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:04.433Z,1513230004.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:04.447Z,1513230004.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:04.836Z,1513230004.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:04.870Z,1513230004.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:05.229Z,1513230005.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:05.252Z,1513230005.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:05.644Z,1513230005.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:05.672Z,1513230005.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:06.061Z,1513230006.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:06.075Z,1513230006.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:06.434Z,1513230006.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:06.450Z,1513230006.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:06.827Z,1513230006.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:06.855Z,1513230006.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:07.233Z,1513230007.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:07.239Z,1513230007.239 [PNI_TCM](ERROR): CRC does not match. Expected:0x44924 got:0x42095
2017-12-14T05:40:07.278Z,1513230007.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:07.641Z,1513230007.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:07.656Z,1513230007.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:08.038Z,1513230008.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:08.077Z,1513230008.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:08.430Z,1513230008.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:08.456Z,1513230008.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:08.866Z,1513230008.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:08.885Z,1513230008.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:09.257Z,1513230009.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:09.280Z,1513230009.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:09.650Z,1513230009.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:09.678Z,1513230009.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:10.032Z,1513230010.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:10.055Z,1513230010.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:10.433Z,1513230010.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:10.447Z,1513230010.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:10.833Z,1513230010.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:10.853Z,1513230010.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:11.243Z,1513230011.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:11.279Z,1513230011.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:11.641Z,1513230011.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:11.657Z,1513230011.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:12.058Z,1513230012.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:12.088Z,1513230012.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:12.458Z,1513230012.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:12.481Z,1513230012.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:12.853Z,1513230012.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:12.895Z,1513230012.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:13.219Z,1513230013.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:13.263Z,1513230013.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:13.619Z,1513230013.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:13.652Z,1513230013.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:14.024Z,1513230014.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:14.055Z,1513230014.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:14.423Z,1513230014.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:14.455Z,1513230014.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:14.865Z,1513230014.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:14.880Z,1513230014.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:15.261Z,1513230015.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:15.318Z,1513230015.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:15.645Z,1513230015.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:15.660Z,1513230015.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:16.024Z,1513230016.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:16.051Z,1513230016.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:16.423Z,1513230016.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:16.460Z,1513230016.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:16.821Z,1513230016.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:16.864Z,1513230016.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:17.223Z,1513230017.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:17.251Z,1513230017.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:17.637Z,1513230017.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:17.666Z,1513230017.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:18.052Z,1513230018.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:18.072Z,1513230018.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:18.461Z,1513230018.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:18.480Z,1513230018.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:18.831Z,1513230018.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:18.859Z,1513230018.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:19.228Z,1513230019.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:19.247Z,1513230019.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:19.630Z,1513230019.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:19.653Z,1513230019.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:20.040Z,1513230020.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:20.101Z,1513230020.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:20.435Z,1513230020.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:20.491Z,1513230020.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:20.843Z,1513230020.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:20.859Z,1513230020.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:21.246Z,1513230021.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:21.285Z,1513230021.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:21.651Z,1513230021.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:21.666Z,1513230021.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:22.048Z,1513230022.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:22.095Z,1513230022.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:22.434Z,1513230022.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:22.450Z,1513230022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:22.820Z,1513230022.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:22.857Z,1513230022.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:23.219Z,1513230023.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:23.256Z,1513230023.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:23.646Z,1513230023.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:23.661Z,1513230023.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:24.047Z,1513230024.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:24.068Z,1513230024.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:24.450Z,1513230024.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:24.480Z,1513230024.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:24.488Z,1513230024.488 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:35:24.2Z
2017-12-14T05:40:24.488Z,1513230024.488 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T05:40:24.488Z,1513230024.488 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T05:40:24.819Z,1513230024.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:24.899Z,1513230024.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:25.724Z,1513230025.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:25.743Z,1513230025.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:25.841Z,1513230025.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:25.886Z,1513230025.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:29.288Z,1513230029.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:29.302Z,1513230029.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:29.381Z,1513230029.381 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0120.lzma
2017-12-14T05:40:29.418Z,1513230029.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:29.448Z,1513230029.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:29.805Z,1513230029.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:29.837Z,1513230029.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:30.171Z,1513230030.171 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0120.lzma.bak
2017-12-14T05:40:30.171Z,1513230030.171 [DataOverHttps](INFO): SBD MOMSN=5437914
2017-12-14T05:40:30.231Z,1513230030.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:30.288Z,1513230030.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:31.650Z,1513230031.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:31.682Z,1513230031.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:31.780Z,1513230031.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:31.815Z,1513230031.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:35.246Z,1513230035.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:35.262Z,1513230035.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:35.386Z,1513230035.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:35.419Z,1513230035.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:35.746Z,1513230035.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:35.763Z,1513230035.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:36.136Z,1513230036.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:36.159Z,1513230036.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:36.544Z,1513230036.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:36.559Z,1513230036.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:36.943Z,1513230036.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:36.964Z,1513230036.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:40.454Z,1513230040.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:40.471Z,1513230040.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:40.545Z,1513230040.545 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0121.lzma
2017-12-14T05:40:40.583Z,1513230040.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:40.623Z,1513230040.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:40.999Z,1513230040.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:41.075Z,1513230041.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:41.319Z,1513230041.319 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0121.lzma.bak
2017-12-14T05:40:41.319Z,1513230041.319 [DataOverHttps](INFO): SBD MOMSN=5437916
2017-12-14T05:40:41.373Z,1513230041.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:41.381Z,1513230041.381 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:40:41.381Z,1513230041.381 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:40:41.381Z,1513230041.381 [BPC1](ERROR): Data Fault
2017-12-14T05:40:41.403Z,1513230041.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:41.432Z,1513230041.432 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:40:42.734Z,1513230042.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:42.759Z,1513230042.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:42.762Z,1513230042.762 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T05:40:42.763Z,1513230042.763 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T05:40:42.763Z,1513230042.763 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T05:40:42.866Z,1513230042.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:42.888Z,1513230042.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:46.217Z,1513230046.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:46.233Z,1513230046.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:46.280Z,1513230046.280 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:40:46.281Z,1513230046.281 [BPC1] No Fault, FailCount= 1
2017-12-14T05:40:46.355Z,1513230046.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:46.435Z,1513230046.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:46.730Z,1513230046.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:46.744Z,1513230046.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:47.128Z,1513230047.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:47.144Z,1513230047.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:47.523Z,1513230047.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:47.542Z,1513230047.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:47.946Z,1513230047.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:47.976Z,1513230047.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:48.330Z,1513230048.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:48.344Z,1513230048.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:48.730Z,1513230048.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:48.744Z,1513230048.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:49.144Z,1513230049.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:49.175Z,1513230049.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:49.529Z,1513230049.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:49.551Z,1513230049.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:49.924Z,1513230049.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:49.941Z,1513230049.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:50.324Z,1513230050.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:50.338Z,1513230050.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:50.775Z,1513230050.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:50.790Z,1513230050.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:51.124Z,1513230051.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:51.143Z,1513230051.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:51.534Z,1513230051.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:51.549Z,1513230051.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:51.930Z,1513230051.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:51.964Z,1513230051.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:52.337Z,1513230052.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:52.352Z,1513230052.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:52.771Z,1513230052.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:52.919Z,1513230052.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:53.123Z,1513230053.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:53.159Z,1513230053.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:53.529Z,1513230053.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:53.544Z,1513230053.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:53.934Z,1513230053.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:53.949Z,1513230053.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:54.338Z,1513230054.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:54.353Z,1513230054.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:54.734Z,1513230054.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:54.791Z,1513230054.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:55.115Z,1513230055.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:55.141Z,1513230055.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:55.515Z,1513230055.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:55.542Z,1513230055.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:55.930Z,1513230055.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:55.951Z,1513230055.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:56.315Z,1513230056.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:56.348Z,1513230056.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:56.738Z,1513230056.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:56.754Z,1513230056.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:57.137Z,1513230057.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:57.206Z,1513230057.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:57.538Z,1513230057.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:57.561Z,1513230057.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:57.918Z,1513230057.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:57.947Z,1513230057.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:58.315Z,1513230058.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:58.352Z,1513230058.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:58.715Z,1513230058.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:58.747Z,1513230058.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:59.120Z,1513230059.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:59.149Z,1513230059.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:59.515Z,1513230059.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:59.542Z,1513230059.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:40:59.938Z,1513230059.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:40:59.955Z,1513230059.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:00.354Z,1513230060.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:00.380Z,1513230060.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:00.726Z,1513230060.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:00.742Z,1513230060.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:01.122Z,1513230061.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:01.136Z,1513230061.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:01.524Z,1513230061.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:01.539Z,1513230061.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:01.926Z,1513230061.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:01.940Z,1513230061.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:02.324Z,1513230062.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:02.338Z,1513230062.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:02.730Z,1513230062.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:02.745Z,1513230062.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:03.130Z,1513230063.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:03.146Z,1513230063.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:03.540Z,1513230063.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:03.580Z,1513230063.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:03.933Z,1513230063.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:03.951Z,1513230063.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:04.327Z,1513230064.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:04.342Z,1513230064.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:04.755Z,1513230064.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:04.781Z,1513230064.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:05.126Z,1513230065.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:05.150Z,1513230065.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:05.527Z,1513230065.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:05.548Z,1513230065.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:05.932Z,1513230065.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:05.951Z,1513230065.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:06.334Z,1513230066.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:06.349Z,1513230066.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:06.733Z,1513230066.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:06.829Z,1513230066.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:07.116Z,1513230067.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:07.143Z,1513230067.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:07.515Z,1513230067.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:07.563Z,1513230067.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:07.916Z,1513230067.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:07.955Z,1513230067.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:08.318Z,1513230068.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:08.359Z,1513230068.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:08.729Z,1513230068.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:08.760Z,1513230068.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:09.143Z,1513230069.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:09.159Z,1513230069.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:09.534Z,1513230069.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:09.568Z,1513230069.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:09.955Z,1513230069.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:09.970Z,1513230069.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:10.319Z,1513230070.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:10.359Z,1513230070.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:10.754Z,1513230070.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:10.819Z,1513230070.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:11.123Z,1513230071.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:11.163Z,1513230071.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:11.532Z,1513230071.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:11.561Z,1513230071.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:11.933Z,1513230071.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:11.959Z,1513230071.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:12.326Z,1513230072.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:12.410Z,1513230072.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:12.738Z,1513230072.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:12.771Z,1513230072.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:13.124Z,1513230073.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:13.158Z,1513230073.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:13.525Z,1513230073.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:13.539Z,1513230073.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:13.922Z,1513230073.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:13.937Z,1513230073.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:14.322Z,1513230074.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:14.340Z,1513230074.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:14.734Z,1513230074.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:14.769Z,1513230074.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:15.130Z,1513230075.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:15.180Z,1513230075.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:15.526Z,1513230075.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:15.540Z,1513230075.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:15.924Z,1513230075.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:15.938Z,1513230075.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:16.322Z,1513230076.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:16.342Z,1513230076.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:16.726Z,1513230076.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:16.778Z,1513230076.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:17.124Z,1513230077.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:17.151Z,1513230077.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:17.523Z,1513230077.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:17.539Z,1513230077.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:17.932Z,1513230077.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:17.949Z,1513230077.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:18.374Z,1513230078.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:18.406Z,1513230078.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:18.762Z,1513230078.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:18.794Z,1513230078.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:19.129Z,1513230079.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:19.156Z,1513230079.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:19.526Z,1513230079.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:19.592Z,1513230079.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:19.944Z,1513230079.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:19.973Z,1513230079.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:20.329Z,1513230080.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:20.344Z,1513230080.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:20.751Z,1513230080.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:20.806Z,1513230080.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:21.140Z,1513230081.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:21.155Z,1513230081.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:21.553Z,1513230081.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:21.617Z,1513230081.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:21.918Z,1513230081.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:21.955Z,1513230081.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:22.318Z,1513230082.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:22.363Z,1513230082.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:22.716Z,1513230082.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:22.760Z,1513230082.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:23.117Z,1513230083.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:23.163Z,1513230083.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:23.537Z,1513230083.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:23.582Z,1513230083.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:23.971Z,1513230083.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:24.034Z,1513230084.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:24.341Z,1513230084.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:24.356Z,1513230084.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:24.738Z,1513230084.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:24.755Z,1513230084.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:25.163Z,1513230085.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:25.191Z,1513230085.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:25.534Z,1513230085.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:25.550Z,1513230085.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:25.917Z,1513230085.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:25.953Z,1513230085.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:26.326Z,1513230086.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:26.347Z,1513230086.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:26.735Z,1513230086.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:26.750Z,1513230086.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:27.133Z,1513230087.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:27.163Z,1513230087.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:27.536Z,1513230087.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:27.551Z,1513230087.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:27.952Z,1513230087.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:27.980Z,1513230087.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:28.328Z,1513230088.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:28.352Z,1513230088.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:28.724Z,1513230088.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:28.847Z,1513230088.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:29.116Z,1513230089.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:29.152Z,1513230089.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:29.515Z,1513230089.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:29.550Z,1513230089.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:29.936Z,1513230089.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:29.994Z,1513230089.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:30.339Z,1513230090.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:30.355Z,1513230090.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:30.739Z,1513230090.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:30.807Z,1513230090.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:31.115Z,1513230091.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:31.154Z,1513230091.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:31.561Z,1513230091.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:31.621Z,1513230091.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:31.916Z,1513230091.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:31.930Z,1513230091.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:32.319Z,1513230092.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:32.334Z,1513230092.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:32.754Z,1513230092.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:32.827Z,1513230092.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:33.162Z,1513230093.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:33.188Z,1513230093.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:33.598Z,1513230093.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:33.620Z,1513230093.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:33.937Z,1513230093.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:33.984Z,1513230093.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:34.324Z,1513230094.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:34.343Z,1513230094.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:34.734Z,1513230094.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:34.751Z,1513230094.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:35.138Z,1513230095.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:35.159Z,1513230095.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:35.515Z,1513230095.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:35.543Z,1513230095.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:35.934Z,1513230095.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:35.950Z,1513230095.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:36.343Z,1513230096.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:36.358Z,1513230096.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:36.735Z,1513230096.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:36.759Z,1513230096.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:37.116Z,1513230097.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:37.143Z,1513230097.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:37.515Z,1513230097.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:37.548Z,1513230097.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:37.928Z,1513230097.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:37.942Z,1513230097.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:38.326Z,1513230098.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:38.355Z,1513230098.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:38.738Z,1513230098.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:38.764Z,1513230098.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:39.142Z,1513230099.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:39.222Z,1513230099.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:39.554Z,1513230099.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:39.588Z,1513230099.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:39.915Z,1513230099.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:39.947Z,1513230099.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:40.315Z,1513230100.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:40.352Z,1513230100.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:40.746Z,1513230100.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:40.778Z,1513230100.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:41.127Z,1513230101.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:41.184Z,1513230101.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:41.527Z,1513230101.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:41.561Z,1513230101.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:41.953Z,1513230101.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:41.977Z,1513230101.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:42.330Z,1513230102.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:42.351Z,1513230102.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:42.766Z,1513230102.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:42.781Z,1513230102.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:43.125Z,1513230103.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:43.140Z,1513230103.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:47.934Z,1513230107.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:48.729Z,1513230108.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:50.529Z,1513230110.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:50.557Z,1513230110.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:50.667Z,1513230110.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:50.743Z,1513230110.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:51.090Z,1513230111.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:51.196Z,1513230111.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:51.485Z,1513230111.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:51.552Z,1513230111.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:51.864Z,1513230111.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:51.908Z,1513230111.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:52.254Z,1513230112.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:52.304Z,1513230112.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:52.703Z,1513230112.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:52.747Z,1513230112.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:53.042Z,1513230113.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:53.087Z,1513230113.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:53.461Z,1513230113.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:53.508Z,1513230113.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:53.858Z,1513230113.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:53.893Z,1513230113.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:54.254Z,1513230114.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:54.262Z,1513230114.262 [BPC1](ERROR): Failed to receive battery data
2017-12-14T05:41:54.262Z,1513230114.262 [BPC1] Communications Fault, FailCount= 1
2017-12-14T05:41:54.262Z,1513230114.262 [BPC1](ERROR): Communications Fault
2017-12-14T05:41:54.307Z,1513230114.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:54.336Z,1513230114.336 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T05:41:54.723Z,1513230114.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:54.767Z,1513230114.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:55.042Z,1513230115.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:55.091Z,1513230115.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:55.473Z,1513230115.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:55.500Z,1513230115.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:55.559Z,1513230115.559 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:41:55.559Z,1513230115.559 [BPC1] No Fault, FailCount= 1
2017-12-14T05:41:55.877Z,1513230115.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:55.987Z,1513230115.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:56.252Z,1513230116.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:56.292Z,1513230116.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:56.688Z,1513230116.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:56.762Z,1513230116.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:57.070Z,1513230117.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:57.093Z,1513230117.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:57.449Z,1513230117.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:57.497Z,1513230117.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:57.846Z,1513230117.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:57.866Z,1513230117.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:58.243Z,1513230118.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:58.257Z,1513230118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:58.703Z,1513230118.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:58.750Z,1513230118.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:59.058Z,1513230119.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:59.074Z,1513230119.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:59.451Z,1513230119.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:59.467Z,1513230119.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:41:59.853Z,1513230119.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:41:59.868Z,1513230119.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:00.255Z,1513230120.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:00.270Z,1513230120.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:00.653Z,1513230120.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:00.748Z,1513230120.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:01.056Z,1513230121.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:01.083Z,1513230121.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:01.440Z,1513230121.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:01.469Z,1513230121.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:01.839Z,1513230121.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:01.865Z,1513230121.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:02.239Z,1513230122.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:02.265Z,1513230122.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:02.658Z,1513230122.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:02.673Z,1513230122.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:03.069Z,1513230123.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:03.084Z,1513230123.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:03.468Z,1513230123.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:03.482Z,1513230123.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:03.841Z,1513230123.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:03.868Z,1513230123.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:04.239Z,1513230124.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:04.292Z,1513230124.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:04.643Z,1513230124.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:04.670Z,1513230124.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:05.043Z,1513230125.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:05.066Z,1513230125.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:05.441Z,1513230125.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:05.464Z,1513230125.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:05.869Z,1513230125.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:05.891Z,1513230125.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:06.283Z,1513230126.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:06.303Z,1513230126.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:06.707Z,1513230126.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:06.738Z,1513230126.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:07.055Z,1513230127.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:07.075Z,1513230127.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:07.450Z,1513230127.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:07.482Z,1513230127.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:07.847Z,1513230127.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:07.863Z,1513230127.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:08.241Z,1513230128.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:08.255Z,1513230128.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:08.712Z,1513230128.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:08.759Z,1513230128.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:09.100Z,1513230129.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:09.127Z,1513230129.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:09.461Z,1513230129.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:09.507Z,1513230129.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:09.849Z,1513230129.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:09.864Z,1513230129.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:10.247Z,1513230130.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:10.261Z,1513230130.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:10.698Z,1513230130.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:10.719Z,1513230130.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:11.052Z,1513230131.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:11.071Z,1513230131.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:11.447Z,1513230131.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:11.463Z,1513230131.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:11.861Z,1513230131.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:11.876Z,1513230131.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:12.278Z,1513230132.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:12.319Z,1513230132.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:12.704Z,1513230132.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:12.754Z,1513230132.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:13.060Z,1513230133.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:13.075Z,1513230133.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:13.451Z,1513230133.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:13.467Z,1513230133.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:13.846Z,1513230133.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:13.860Z,1513230133.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:14.250Z,1513230134.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:14.264Z,1513230134.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:14.650Z,1513230134.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:14.739Z,1513230134.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:15.066Z,1513230135.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:15.111Z,1513230135.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:15.502Z,1513230135.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:15.544Z,1513230135.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:15.839Z,1513230135.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:15.905Z,1513230135.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:16.256Z,1513230136.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:16.272Z,1513230136.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:16.643Z,1513230136.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:16.691Z,1513230136.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:17.054Z,1513230137.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:17.097Z,1513230137.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:17.447Z,1513230137.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:17.473Z,1513230137.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:17.864Z,1513230137.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:17.878Z,1513230137.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:18.312Z,1513230138.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:18.327Z,1513230138.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:18.676Z,1513230138.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:18.696Z,1513230138.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:19.047Z,1513230139.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:19.075Z,1513230139.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:19.457Z,1513230139.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:19.472Z,1513230139.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:19.857Z,1513230139.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:19.872Z,1513230139.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:20.247Z,1513230140.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:20.262Z,1513230140.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:20.706Z,1513230140.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:20.731Z,1513230140.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:21.066Z,1513230141.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:21.081Z,1513230141.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:21.465Z,1513230141.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:21.479Z,1513230141.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:21.867Z,1513230141.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:21.899Z,1513230141.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:22.263Z,1513230142.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:22.278Z,1513230142.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:22.704Z,1513230142.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:22.741Z,1513230142.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:23.044Z,1513230143.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:23.079Z,1513230143.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:23.439Z,1513230143.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:23.465Z,1513230143.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:23.863Z,1513230143.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:23.879Z,1513230143.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:24.268Z,1513230144.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:24.283Z,1513230144.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:24.705Z,1513230144.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:24.763Z,1513230144.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:25.073Z,1513230145.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:25.108Z,1513230145.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:25.451Z,1513230145.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:25.479Z,1513230145.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:25.848Z,1513230145.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:25.873Z,1513230145.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:26.251Z,1513230146.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:26.278Z,1513230146.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:26.714Z,1513230146.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:26.735Z,1513230146.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:27.066Z,1513230147.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:27.111Z,1513230147.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:27.456Z,1513230147.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:27.480Z,1513230147.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:27.842Z,1513230147.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:27.865Z,1513230147.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:28.266Z,1513230148.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:28.297Z,1513230148.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:28.646Z,1513230148.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:28.707Z,1513230148.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:29.059Z,1513230149.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:29.094Z,1513230149.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:29.454Z,1513230149.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:29.475Z,1513230149.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:29.853Z,1513230149.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:29.869Z,1513230149.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:30.258Z,1513230150.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:30.272Z,1513230150.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:30.766Z,1513230150.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:30.780Z,1513230150.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:31.063Z,1513230151.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:31.100Z,1513230151.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:31.463Z,1513230151.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:31.495Z,1513230151.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:31.871Z,1513230151.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:31.887Z,1513230151.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:32.243Z,1513230152.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:32.276Z,1513230152.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:32.666Z,1513230152.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:32.681Z,1513230152.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:33.074Z,1513230153.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:33.103Z,1513230153.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:33.466Z,1513230153.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:33.486Z,1513230153.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:33.844Z,1513230153.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:33.879Z,1513230153.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:34.243Z,1513230154.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:34.258Z,1513230154.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:34.703Z,1513230154.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:34.759Z,1513230154.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:35.072Z,1513230155.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:35.087Z,1513230155.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:35.442Z,1513230155.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:35.501Z,1513230155.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:35.865Z,1513230155.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:35.907Z,1513230155.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:36.258Z,1513230156.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:36.282Z,1513230156.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:36.718Z,1513230156.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:36.735Z,1513230156.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:37.057Z,1513230157.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:37.114Z,1513230157.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:37.439Z,1513230157.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:37.474Z,1513230157.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:37.870Z,1513230157.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:37.966Z,1513230157.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:38.241Z,1513230158.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:38.275Z,1513230158.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:38.706Z,1513230158.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:38.731Z,1513230158.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:39.074Z,1513230159.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:39.088Z,1513230159.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:39.462Z,1513230159.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:39.478Z,1513230159.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:39.839Z,1513230159.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:39.874Z,1513230159.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:40.241Z,1513230160.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:40.272Z,1513230160.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:40.704Z,1513230160.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:40.732Z,1513230160.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:41.040Z,1513230161.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:41.095Z,1513230161.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:41.481Z,1513230161.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:41.541Z,1513230161.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:41.845Z,1513230161.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:41.879Z,1513230161.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:42.267Z,1513230162.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:42.281Z,1513230162.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:42.695Z,1513230162.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:42.756Z,1513230162.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:43.045Z,1513230163.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:43.060Z,1513230163.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:43.480Z,1513230163.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:43.503Z,1513230163.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:46.915Z,1513230166.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:47.029Z,1513230167.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:47.029Z,1513230167.029 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2017-12-14T05:42:47.029Z,1513230167.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:42:47.031Z,1513230167.031 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:47.031Z,1513230167.031 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104
2017-12-14T05:42:47.031Z,1513230167.031 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:42:47.041Z,1513230167.041 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:47.041Z,1513230167.041 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2017-12-14T05:42:47.041Z,1513230167.041 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:42:47.064Z,1513230167.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:42:47.073Z,1513230167.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:42:47.073Z,1513230167.073 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:42:47.129Z,1513230167.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:47.201Z,1513230167.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:42:47.201Z,1513230167.201 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2017-12-14T05:42:47.202Z,1513230167.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:42:47.202Z,1513230167.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104
2017-12-14T05:42:47.202Z,1513230167.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:42:47.202Z,1513230167.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2017-12-14T05:42:47.520Z,1513230167.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:47.538Z,1513230167.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:42:47.539Z,1513230167.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:42:47.539Z,1513230167.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:42:47.540Z,1513230167.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:42:47.540Z,1513230167.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:42:47.540Z,1513230167.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:42:47.561Z,1513230167.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:42:47.562Z,1513230167.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:42:47.562Z,1513230167.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:42:47.938Z,1513230167.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:48.032Z,1513230168.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:48.326Z,1513230168.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:48.347Z,1513230168.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:48.728Z,1513230168.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:48.747Z,1513230168.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:49.127Z,1513230169.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:49.142Z,1513230169.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:49.515Z,1513230169.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:49.532Z,1513230169.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:49.923Z,1513230169.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:49.951Z,1513230169.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:50.329Z,1513230170.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:50.344Z,1513230170.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:50.723Z,1513230170.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:50.767Z,1513230170.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:51.119Z,1513230171.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:51.150Z,1513230171.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:51.513Z,1513230171.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:51.550Z,1513230171.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:51.909Z,1513230171.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:51.924Z,1513230171.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:52.315Z,1513230172.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:52.331Z,1513230172.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:52.725Z,1513230172.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:52.762Z,1513230172.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:53.179Z,1513230173.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:53.227Z,1513230173.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:53.526Z,1513230173.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:53.555Z,1513230173.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:53.944Z,1513230173.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:53.960Z,1513230173.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:54.315Z,1513230174.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:54.331Z,1513230174.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:54.723Z,1513230174.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:54.744Z,1513230174.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:55.121Z,1513230175.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:55.136Z,1513230175.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:55.522Z,1513230175.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:55.536Z,1513230175.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:55.919Z,1513230175.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:55.934Z,1513230175.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:56.321Z,1513230176.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:56.335Z,1513230176.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:56.762Z,1513230176.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:56.786Z,1513230176.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:57.138Z,1513230177.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:57.176Z,1513230177.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:57.544Z,1513230177.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:57.618Z,1513230177.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:57.926Z,1513230177.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:57.998Z,1513230177.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:58.326Z,1513230178.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:58.352Z,1513230178.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:58.720Z,1513230178.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:58.757Z,1513230178.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:59.116Z,1513230179.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:59.171Z,1513230179.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:59.515Z,1513230179.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:59.555Z,1513230179.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:42:59.929Z,1513230179.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:42:59.979Z,1513230179.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:00.328Z,1513230180.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:00.363Z,1513230180.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:00.733Z,1513230180.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:00.763Z,1513230180.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:01.125Z,1513230181.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:01.156Z,1513230181.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:01.516Z,1513230181.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:01.536Z,1513230181.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:01.913Z,1513230181.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:01.935Z,1513230181.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:02.317Z,1513230182.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:02.331Z,1513230182.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:02.719Z,1513230182.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:02.738Z,1513230182.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:03.122Z,1513230183.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:03.136Z,1513230183.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:03.544Z,1513230183.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:03.580Z,1513230183.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:03.915Z,1513230183.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:03.929Z,1513230183.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:04.311Z,1513230184.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:04.334Z,1513230184.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:04.724Z,1513230184.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:04.738Z,1513230184.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:05.129Z,1513230185.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:05.144Z,1513230185.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:05.508Z,1513230185.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:05.544Z,1513230185.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:05.932Z,1513230185.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:05.947Z,1513230185.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:06.332Z,1513230186.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:06.348Z,1513230186.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:06.733Z,1513230186.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:06.756Z,1513230186.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:07.107Z,1513230187.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:07.139Z,1513230187.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:07.508Z,1513230187.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:07.539Z,1513230187.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:07.911Z,1513230187.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:07.937Z,1513230187.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:08.307Z,1513230188.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:08.352Z,1513230188.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:08.726Z,1513230188.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:08.741Z,1513230188.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:09.128Z,1513230189.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:09.143Z,1513230189.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:09.527Z,1513230189.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:09.555Z,1513230189.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:09.912Z,1513230189.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:09.982Z,1513230189.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:10.307Z,1513230190.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:10.343Z,1513230190.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:10.755Z,1513230190.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:10.798Z,1513230190.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:11.118Z,1513230191.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:11.145Z,1513230191.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:11.526Z,1513230191.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:11.556Z,1513230191.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:11.928Z,1513230191.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:11.962Z,1513230191.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:12.349Z,1513230192.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:12.384Z,1513230192.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:12.714Z,1513230192.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:12.729Z,1513230192.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:13.158Z,1513230193.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:13.182Z,1513230193.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:13.517Z,1513230193.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:13.532Z,1513230193.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:13.926Z,1513230193.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:13.943Z,1513230193.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:14.329Z,1513230194.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:14.345Z,1513230194.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:14.730Z,1513230194.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:14.745Z,1513230194.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:15.128Z,1513230195.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:15.143Z,1513230195.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:15.522Z,1513230195.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:15.536Z,1513230195.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:15.921Z,1513230195.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:15.943Z,1513230195.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:16.337Z,1513230196.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:16.379Z,1513230196.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:16.736Z,1513230196.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:16.751Z,1513230196.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:17.134Z,1513230197.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:17.152Z,1513230197.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:17.532Z,1513230197.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:17.547Z,1513230197.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:17.912Z,1513230197.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:17.941Z,1513230197.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:18.308Z,1513230198.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:18.340Z,1513230198.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:18.740Z,1513230198.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:18.756Z,1513230198.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:19.135Z,1513230199.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:19.224Z,1513230199.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:19.573Z,1513230199.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:19.647Z,1513230199.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:19.928Z,1513230199.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:19.986Z,1513230199.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:20.307Z,1513230200.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:20.336Z,1513230200.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:20.706Z,1513230200.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:20.752Z,1513230200.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:21.112Z,1513230201.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:21.137Z,1513230201.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:21.511Z,1513230201.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:21.538Z,1513230201.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:21.917Z,1513230201.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:21.953Z,1513230201.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:22.325Z,1513230202.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:22.349Z,1513230202.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:22.738Z,1513230202.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:22.759Z,1513230202.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:23.123Z,1513230203.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:23.158Z,1513230203.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:23.512Z,1513230203.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:23.535Z,1513230203.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:23.918Z,1513230203.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:23.933Z,1513230203.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:24.308Z,1513230204.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:24.328Z,1513230204.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:24.766Z,1513230204.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:24.790Z,1513230204.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:25.126Z,1513230205.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:25.140Z,1513230205.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:25.519Z,1513230205.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:25.543Z,1513230205.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:25.955Z,1513230205.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:25.995Z,1513230205.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:26.317Z,1513230206.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:26.339Z,1513230206.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:26.714Z,1513230206.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:26.734Z,1513230206.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:27.129Z,1513230207.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:27.144Z,1513230207.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:27.521Z,1513230207.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:27.536Z,1513230207.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:27.924Z,1513230207.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:27.942Z,1513230207.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:28.328Z,1513230208.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:28.343Z,1513230208.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:28.730Z,1513230208.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:28.746Z,1513230208.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:29.154Z,1513230209.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:29.211Z,1513230209.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:29.508Z,1513230209.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:29.538Z,1513230209.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:29.912Z,1513230209.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:29.951Z,1513230209.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:30.307Z,1513230210.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:30.352Z,1513230210.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:30.721Z,1513230210.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:30.748Z,1513230210.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:31.137Z,1513230211.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:31.152Z,1513230211.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:31.526Z,1513230211.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:31.549Z,1513230211.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:31.912Z,1513230211.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:31.926Z,1513230211.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:32.307Z,1513230212.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:32.394Z,1513230212.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:32.709Z,1513230212.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:32.751Z,1513230212.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:33.116Z,1513230213.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:33.143Z,1513230213.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:33.511Z,1513230213.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:33.525Z,1513230213.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:33.915Z,1513230213.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:33.954Z,1513230213.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:34.326Z,1513230214.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:34.350Z,1513230214.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:34.725Z,1513230214.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:34.755Z,1513230214.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:35.115Z,1513230215.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:35.155Z,1513230215.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:35.562Z,1513230215.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:35.606Z,1513230215.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:35.918Z,1513230215.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:35.932Z,1513230215.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:36.323Z,1513230216.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:36.371Z,1513230216.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:36.725Z,1513230216.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:36.760Z,1513230216.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:37.130Z,1513230217.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:37.160Z,1513230217.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:37.522Z,1513230217.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:37.537Z,1513230217.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:37.916Z,1513230217.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:37.935Z,1513230217.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:38.319Z,1513230218.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:38.339Z,1513230218.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:38.776Z,1513230218.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:38.845Z,1513230218.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:39.113Z,1513230219.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:39.127Z,1513230219.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:39.529Z,1513230219.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:39.560Z,1513230219.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:39.930Z,1513230219.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:40.068Z,1513230220.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:40.325Z,1513230220.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:40.359Z,1513230220.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:40.713Z,1513230220.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:40.754Z,1513230220.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:41.116Z,1513230221.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:41.131Z,1513230221.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:41.515Z,1513230221.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:41.574Z,1513230221.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:41.926Z,1513230221.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:41.940Z,1513230221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:42.326Z,1513230222.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:42.340Z,1513230222.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:42.730Z,1513230222.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:42.744Z,1513230222.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:43.129Z,1513230223.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:43.144Z,1513230223.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:43.518Z,1513230223.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:43.533Z,1513230223.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:47.077Z,1513230227.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:47.092Z,1513230227.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:47.196Z,1513230227.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:47.227Z,1513230227.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:47.580Z,1513230227.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:47.619Z,1513230227.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:47.982Z,1513230227.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:48.003Z,1513230228.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:48.374Z,1513230228.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:48.399Z,1513230228.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:48.756Z,1513230228.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:48.791Z,1513230228.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:49.159Z,1513230229.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:49.191Z,1513230229.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:49.574Z,1513230229.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:49.636Z,1513230229.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:49.977Z,1513230229.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:49.993Z,1513230229.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:50.379Z,1513230230.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:50.394Z,1513230230.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:50.756Z,1513230230.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:50.792Z,1513230230.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:51.156Z,1513230231.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:51.195Z,1513230231.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:51.626Z,1513230231.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:51.654Z,1513230231.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:51.969Z,1513230231.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:51.999Z,1513230231.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:52.373Z,1513230232.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:52.401Z,1513230232.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:52.774Z,1513230232.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:52.802Z,1513230232.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:53.164Z,1513230233.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:53.179Z,1513230233.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:53.577Z,1513230233.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:53.611Z,1513230233.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:53.977Z,1513230233.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:54.005Z,1513230234.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:54.379Z,1513230234.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:54.403Z,1513230234.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:54.807Z,1513230234.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:54.866Z,1513230234.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:55.166Z,1513230235.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:55.211Z,1513230235.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:55.574Z,1513230235.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:55.605Z,1513230235.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:55.981Z,1513230235.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:56.012Z,1513230236.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:56.370Z,1513230236.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:56.385Z,1513230236.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:56.770Z,1513230236.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:56.785Z,1513230236.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:57.164Z,1513230237.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:57.179Z,1513230237.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:57.574Z,1513230237.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:57.589Z,1513230237.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:57.975Z,1513230237.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:57.999Z,1513230237.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:58.388Z,1513230238.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:58.413Z,1513230238.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:58.766Z,1513230238.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:58.800Z,1513230238.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:59.161Z,1513230239.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:59.176Z,1513230239.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:59.578Z,1513230239.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:43:59.608Z,1513230239.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:43:59.978Z,1513230239.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:00.058Z,1513230240.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:00.374Z,1513230240.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:00.405Z,1513230240.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:00.766Z,1513230240.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:00.828Z,1513230240.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:01.168Z,1513230241.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:01.234Z,1513230241.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:01.570Z,1513230241.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:01.630Z,1513230241.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:01.974Z,1513230241.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:01.989Z,1513230241.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:02.373Z,1513230242.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:02.504Z,1513230242.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:02.766Z,1513230242.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:02.783Z,1513230242.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:03.160Z,1513230243.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:03.189Z,1513230243.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:03.578Z,1513230243.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:03.642Z,1513230243.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:03.979Z,1513230243.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:03.995Z,1513230243.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:04.402Z,1513230244.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:04.440Z,1513230244.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:04.756Z,1513230244.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:04.791Z,1513230244.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:05.156Z,1513230245.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:05.189Z,1513230245.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:05.565Z,1513230245.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:05.580Z,1513230245.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:05.969Z,1513230245.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:05.983Z,1513230245.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:06.372Z,1513230246.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:06.386Z,1513230246.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:06.768Z,1513230246.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:06.793Z,1513230246.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:07.171Z,1513230247.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:07.185Z,1513230247.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:07.579Z,1513230247.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:07.599Z,1513230247.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:07.976Z,1513230247.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:07.992Z,1513230247.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:08.374Z,1513230248.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:08.388Z,1513230248.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:08.772Z,1513230248.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:08.793Z,1513230248.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:09.156Z,1513230249.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:09.190Z,1513230249.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:09.538Z,1513230249.538 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T05:44:09.538Z,1513230249.538 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T05:44:09.538Z,1513230249.538 [DropWeight](ERROR): Hardware Fault
2017-12-14T05:44:09.579Z,1513230249.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:09.623Z,1513230249.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:09.634Z,1513230249.634 [CBIT](INFO): Critical error at 20171214T054409
2017-12-14T05:44:09.636Z,1513230249.636 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T05:44:09.636Z,1513230249.636 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T05:44:09.974Z,1513230249.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:09.999Z,1513230249.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:10.012Z,1513230250.012 [CBIT](INFO): Critical error at 20171214T054409
2017-12-14T05:44:10.373Z,1513230250.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:10.395Z,1513230250.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:10.764Z,1513230250.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:10.815Z,1513230250.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:11.162Z,1513230251.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:11.193Z,1513230251.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:11.590Z,1513230251.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:11.613Z,1513230251.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:11.970Z,1513230251.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:11.991Z,1513230251.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:12.371Z,1513230252.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:12.391Z,1513230252.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:12.765Z,1513230252.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:12.780Z,1513230252.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:13.160Z,1513230253.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:13.180Z,1513230253.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:13.575Z,1513230253.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:13.590Z,1513230253.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:13.976Z,1513230253.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:13.992Z,1513230253.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:14.374Z,1513230254.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:14.388Z,1513230254.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:14.778Z,1513230254.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:14.798Z,1513230254.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:15.180Z,1513230255.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:15.199Z,1513230255.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:15.579Z,1513230255.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:15.594Z,1513230255.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:15.978Z,1513230255.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:15.993Z,1513230255.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:16.371Z,1513230256.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:16.398Z,1513230256.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:16.756Z,1513230256.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:16.831Z,1513230256.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:17.156Z,1513230257.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:17.188Z,1513230257.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:17.570Z,1513230257.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:17.600Z,1513230257.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:17.997Z,1513230257.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:18.044Z,1513230258.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:18.374Z,1513230258.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:18.390Z,1513230258.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:18.756Z,1513230258.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:18.781Z,1513230258.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:19.155Z,1513230259.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:19.187Z,1513230259.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:19.579Z,1513230259.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:19.594Z,1513230259.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:19.978Z,1513230259.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:19.993Z,1513230259.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:20.381Z,1513230260.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:20.395Z,1513230260.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:20.758Z,1513230260.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:20.833Z,1513230260.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:21.152Z,1513230261.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:21.229Z,1513230261.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:21.575Z,1513230261.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:21.608Z,1513230261.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:21.978Z,1513230261.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:21.999Z,1513230261.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:22.366Z,1513230262.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:22.399Z,1513230262.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:22.760Z,1513230262.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:22.793Z,1513230262.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:23.155Z,1513230263.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:23.210Z,1513230263.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:23.578Z,1513230263.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:23.592Z,1513230263.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:23.983Z,1513230263.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:24.038Z,1513230264.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:24.387Z,1513230264.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:24.410Z,1513230264.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:24.762Z,1513230264.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:24.793Z,1513230264.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:25.155Z,1513230265.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:25.175Z,1513230265.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:25.574Z,1513230265.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:25.596Z,1513230265.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:25.974Z,1513230265.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:26.050Z,1513230266.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:26.362Z,1513230266.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:26.376Z,1513230266.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:26.765Z,1513230266.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:26.780Z,1513230266.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:27.164Z,1513230267.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:27.180Z,1513230267.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:27.600Z,1513230267.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:27.656Z,1513230267.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:27.969Z,1513230267.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:27.984Z,1513230267.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:28.370Z,1513230268.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:28.384Z,1513230268.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:28.770Z,1513230268.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:28.784Z,1513230268.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:29.167Z,1513230269.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:29.186Z,1513230269.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:29.571Z,1513230269.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:29.591Z,1513230269.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:29.972Z,1513230269.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:29.988Z,1513230269.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:30.372Z,1513230270.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:30.387Z,1513230270.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:30.793Z,1513230270.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:30.825Z,1513230270.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:31.182Z,1513230271.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:31.196Z,1513230271.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:31.580Z,1513230271.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:31.595Z,1513230271.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:31.978Z,1513230271.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:31.999Z,1513230271.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:32.370Z,1513230272.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:32.420Z,1513230272.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:32.756Z,1513230272.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:32.781Z,1513230272.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:33.172Z,1513230273.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:33.187Z,1513230273.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:33.572Z,1513230273.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:33.594Z,1513230273.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:34.006Z,1513230274.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:34.037Z,1513230274.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:34.374Z,1513230274.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:34.396Z,1513230274.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:34.762Z,1513230274.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:34.801Z,1513230274.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:35.159Z,1513230275.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:35.186Z,1513230275.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:35.570Z,1513230275.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:35.600Z,1513230275.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:35.985Z,1513230275.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:36.007Z,1513230276.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:36.374Z,1513230276.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:36.396Z,1513230276.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:36.758Z,1513230276.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:36.784Z,1513230276.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:37.190Z,1513230277.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:37.243Z,1513230277.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:37.590Z,1513230277.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:37.658Z,1513230277.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:37.984Z,1513230277.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:37.999Z,1513230277.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:38.371Z,1513230278.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:38.399Z,1513230278.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:38.761Z,1513230278.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:38.796Z,1513230278.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:39.172Z,1513230279.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:39.196Z,1513230279.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:39.574Z,1513230279.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:39.597Z,1513230279.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:39.973Z,1513230279.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:39.998Z,1513230279.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:40.400Z,1513230280.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:40.423Z,1513230280.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:40.771Z,1513230280.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:40.804Z,1513230280.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:41.165Z,1513230281.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:41.203Z,1513230281.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:41.578Z,1513230281.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:41.614Z,1513230281.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:41.973Z,1513230281.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:42.003Z,1513230282.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:42.390Z,1513230282.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:42.407Z,1513230282.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:42.764Z,1513230282.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:42.780Z,1513230282.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:43.162Z,1513230283.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:43.177Z,1513230283.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:43.600Z,1513230283.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:43.625Z,1513230283.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:47.063Z,1513230287.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:47.130Z,1513230287.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:47.238Z,1513230287.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:47.276Z,1513230287.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:47.591Z,1513230287.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:47.635Z,1513230287.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:48.023Z,1513230288.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:48.075Z,1513230288.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:48.387Z,1513230288.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:48.435Z,1513230288.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:48.798Z,1513230288.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:48.863Z,1513230288.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:49.201Z,1513230289.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:49.240Z,1513230289.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:49.604Z,1513230289.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:49.633Z,1513230289.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:49.995Z,1513230289.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:50.064Z,1513230290.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:50.388Z,1513230290.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:50.434Z,1513230290.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:50.786Z,1513230290.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:50.802Z,1513230290.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:51.192Z,1513230291.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:51.230Z,1513230291.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:51.599Z,1513230291.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:51.614Z,1513230291.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:51.998Z,1513230291.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:52.019Z,1513230292.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:52.403Z,1513230292.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:52.424Z,1513230292.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:52.806Z,1513230292.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:52.823Z,1513230292.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:53.221Z,1513230293.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:53.263Z,1513230293.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:53.593Z,1513230293.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:53.618Z,1513230293.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:53.000Z,1513230294.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:54.022Z,1513230294.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:54.394Z,1513230294.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:54.424Z,1513230294.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:54.815Z,1513230294.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:54.830Z,1513230294.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:55.211Z,1513230295.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:55.233Z,1513230295.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:55.612Z,1513230295.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:55.634Z,1513230295.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:55.999Z,1513230295.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:56.022Z,1513230296.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:56.386Z,1513230296.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:56.466Z,1513230296.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:56.787Z,1513230296.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:56.812Z,1513230296.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:57.215Z,1513230297.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:57.275Z,1513230297.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:57.615Z,1513230297.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:57.630Z,1513230297.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:58.012Z,1513230298.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:58.054Z,1513230298.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:58.409Z,1513230298.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:58.432Z,1513230298.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:58.786Z,1513230298.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:58.826Z,1513230298.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:59.187Z,1513230299.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:59.223Z,1513230299.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:59.626Z,1513230299.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:44:59.666Z,1513230299.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:44:59.987Z,1513230299.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:00.028Z,1513230300.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:00.380Z,1513230300.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:00.395Z,1513230300.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:00.797Z,1513230300.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:00.842Z,1513230300.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:01.211Z,1513230301.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:01.242Z,1513230301.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:01.610Z,1513230301.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:01.635Z,1513230301.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:01.992Z,1513230301.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:02.035Z,1513230302.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:02.386Z,1513230302.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:02.425Z,1513230302.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:02.803Z,1513230302.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:02.848Z,1513230302.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:03.197Z,1513230303.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:03.212Z,1513230303.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:03.609Z,1513230303.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:03.656Z,1513230303.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:03.994Z,1513230303.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:04.034Z,1513230304.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:04.405Z,1513230304.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:04.444Z,1513230304.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:04.794Z,1513230304.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:04.819Z,1513230304.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:05.204Z,1513230305.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:05.228Z,1513230305.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:05.599Z,1513230305.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:05.622Z,1513230305.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:06.031Z,1513230306.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:06.072Z,1513230306.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:06.407Z,1513230306.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:06.439Z,1513230306.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:06.815Z,1513230306.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:06.834Z,1513230306.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:07.217Z,1513230307.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:07.232Z,1513230307.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:07.605Z,1513230307.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:07.644Z,1513230307.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:07.990Z,1513230307.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:08.019Z,1513230308.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:08.387Z,1513230308.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:08.423Z,1513230308.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:08.791Z,1513230308.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:08.816Z,1513230308.816 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:45:08.816Z,1513230308.816 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:45:08.816Z,1513230308.816 [BPC1](ERROR): Data Fault
2017-12-14T05:45:08.837Z,1513230308.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:08.867Z,1513230308.867 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:45:09.192Z,1513230309.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:09.243Z,1513230309.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:09.597Z,1513230309.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:09.639Z,1513230309.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:09.997Z,1513230309.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:10.029Z,1513230310.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:10.055Z,1513230310.055 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:45:10.055Z,1513230310.055 [BPC1] No Fault, FailCount= 1
2017-12-14T05:45:10.410Z,1513230310.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:10.483Z,1513230310.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:10.795Z,1513230310.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:10.824Z,1513230310.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:11.191Z,1513230311.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:11.211Z,1513230311.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:11.593Z,1513230311.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:11.607Z,1513230311.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:11.996Z,1513230311.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:12.019Z,1513230312.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:12.406Z,1513230312.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:12.446Z,1513230312.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:12.816Z,1513230312.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:12.840Z,1513230312.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:13.220Z,1513230313.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:13.243Z,1513230313.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:13.611Z,1513230313.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:13.626Z,1513230313.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:13.984Z,1513230313.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:14.011Z,1513230314.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:14.386Z,1513230314.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:14.421Z,1513230314.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:14.787Z,1513230314.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:14.835Z,1513230314.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:15.194Z,1513230315.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:15.229Z,1513230315.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:15.657Z,1513230315.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:15.710Z,1513230315.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:16.001Z,1513230316.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:16.039Z,1513230316.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:16.406Z,1513230316.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:16.439Z,1513230316.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:16.796Z,1513230316.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:16.828Z,1513230316.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:17.196Z,1513230317.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:17.246Z,1513230317.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:17.594Z,1513230317.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:17.616Z,1513230317.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:18.002Z,1513230318.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:18.023Z,1513230318.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:18.390Z,1513230318.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:18.420Z,1513230318.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:18.818Z,1513230318.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:18.888Z,1513230318.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:19.232Z,1513230319.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:19.251Z,1513230319.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:19.595Z,1513230319.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:19.639Z,1513230319.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:19.994Z,1513230319.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:20.026Z,1513230320.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:20.400Z,1513230320.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:20.414Z,1513230320.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:20.790Z,1513230320.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:20.806Z,1513230320.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:21.198Z,1513230321.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:21.237Z,1513230321.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:21.616Z,1513230321.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:21.645Z,1513230321.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:21.996Z,1513230321.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:22.046Z,1513230322.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:22.401Z,1513230322.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:22.421Z,1513230322.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:22.796Z,1513230322.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:22.813Z,1513230322.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:23.196Z,1513230323.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:23.226Z,1513230323.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:23.601Z,1513230323.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:23.628Z,1513230323.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:24.000Z,1513230324.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:24.015Z,1513230324.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:24.380Z,1513230324.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:24.422Z,1513230324.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:24.807Z,1513230324.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:24.823Z,1513230324.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:25.221Z,1513230325.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:25.268Z,1513230325.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:25.608Z,1513230325.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:25.630Z,1513230325.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:25.987Z,1513230325.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:26.028Z,1513230326.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:26.387Z,1513230326.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:26.421Z,1513230326.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:26.799Z,1513230326.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:26.853Z,1513230326.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:27.186Z,1513230327.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:27.231Z,1513230327.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:27.613Z,1513230327.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:27.632Z,1513230327.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:28.014Z,1513230328.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:28.028Z,1513230328.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:28.417Z,1513230328.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:28.463Z,1513230328.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:28.787Z,1513230328.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:28.831Z,1513230328.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:29.187Z,1513230329.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:29.228Z,1513230329.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:29.587Z,1513230329.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:29.620Z,1513230329.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:30.002Z,1513230330.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:30.052Z,1513230330.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:30.402Z,1513230330.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:30.417Z,1513230330.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:30.807Z,1513230330.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:30.867Z,1513230330.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:31.221Z,1513230331.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:31.268Z,1513230331.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:31.622Z,1513230331.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:31.671Z,1513230331.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:31.986Z,1513230331.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:32.035Z,1513230332.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:32.387Z,1513230332.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:32.401Z,1513230332.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:32.789Z,1513230332.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:32.836Z,1513230332.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:33.192Z,1513230333.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:33.223Z,1513230333.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:33.609Z,1513230333.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:33.644Z,1513230333.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:33.994Z,1513230333.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:34.008Z,1513230334.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:34.410Z,1513230334.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:34.446Z,1513230334.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:34.829Z,1513230334.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:34.886Z,1513230334.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:35.203Z,1513230335.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:35.250Z,1513230335.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:35.596Z,1513230335.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:35.611Z,1513230335.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:35.997Z,1513230335.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:36.019Z,1513230336.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:36.397Z,1513230336.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:36.444Z,1513230336.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:36.798Z,1513230336.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:36.819Z,1513230336.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:37.202Z,1513230337.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:37.241Z,1513230337.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:37.628Z,1513230337.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:37.690Z,1513230337.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:37.994Z,1513230337.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:38.027Z,1513230338.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:38.385Z,1513230338.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:38.427Z,1513230338.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:38.787Z,1513230338.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:38.831Z,1513230338.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:39.193Z,1513230339.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:39.227Z,1513230339.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:39.606Z,1513230339.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:39.643Z,1513230339.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:39.997Z,1513230339.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:40.013Z,1513230340.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:40.409Z,1513230340.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:40.442Z,1513230340.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:40.796Z,1513230340.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:40.836Z,1513230340.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:41.219Z,1513230341.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:41.242Z,1513230341.242 [PNI_TCM](ERROR): CRC does not match. Expected:0x55869 got:0x7490
2017-12-14T05:45:41.298Z,1513230341.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:41.602Z,1513230341.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:41.644Z,1513230341.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:41.998Z,1513230341.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:42.023Z,1513230342.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:42.396Z,1513230342.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:42.419Z,1513230342.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:42.797Z,1513230342.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:42.845Z,1513230342.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:43.202Z,1513230343.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:43.216Z,1513230343.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:43.221Z,1513230343.221 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:45:43.221Z,1513230343.221 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:45:43.222Z,1513230343.222 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:45:43.222Z,1513230343.222 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:45:43.602Z,1513230343.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:43.624Z,1513230343.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:43.628Z,1513230343.628 [Default:CheckIn:D] Stopped
2017-12-14T05:45:43.628Z,1513230343.628 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:45:47.088Z,1513230347.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:47.104Z,1513230347.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:47.107Z,1513230347.107 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 312.470638 min 
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn:E] Stopped
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn] Stopped
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn](INFO): Running loop #31
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn] Running Loop=31
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:45:47.108Z,1513230347.108 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:45:47.232Z,1513230347.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:47.260Z,1513230347.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:47.600Z,1513230347.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:47.656Z,1513230347.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:47.656Z,1513230347.656 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2017-12-14T05:45:47.656Z,1513230347.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:45:47.658Z,1513230347.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:47.658Z,1513230347.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105
2017-12-14T05:45:47.658Z,1513230347.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:45:47.660Z,1513230347.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:47.660Z,1513230347.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2017-12-14T05:45:47.660Z,1513230347.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:45:47.683Z,1513230347.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:45:47.684Z,1513230347.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:45:47.684Z,1513230347.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:45:47.974Z,1513230347.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:47.000Z,1513230348.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:45:47.000Z,1513230348.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2017-12-14T05:45:48.000Z,1513230348.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:45:48.000Z,1513230348.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105
2017-12-14T05:45:48.017Z,1513230348.017 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:45:48.017Z,1513230348.017 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2017-12-14T05:45:48.366Z,1513230348.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:48.420Z,1513230348.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:45:48.425Z,1513230348.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:45:48.425Z,1513230348.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:45:48.426Z,1513230348.426 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:45:48.426Z,1513230348.426 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:45:48.427Z,1513230348.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:45:48.427Z,1513230348.427 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:45:48.428Z,1513230348.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:45:48.428Z,1513230348.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:45:48.756Z,1513230348.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:48.780Z,1513230348.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:49.173Z,1513230349.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:49.188Z,1513230349.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:49.582Z,1513230349.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:49.597Z,1513230349.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:49.979Z,1513230349.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:49.999Z,1513230349.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:50.377Z,1513230350.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:50.392Z,1513230350.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:50.756Z,1513230350.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:50.799Z,1513230350.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:51.155Z,1513230351.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:51.190Z,1513230351.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:51.576Z,1513230351.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:51.591Z,1513230351.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:51.978Z,1513230351.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:51.999Z,1513230351.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:52.380Z,1513230352.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:52.394Z,1513230352.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:52.783Z,1513230352.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:52.803Z,1513230352.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:53.160Z,1513230353.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:53.203Z,1513230353.203 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T05:45:53.203Z,1513230353.203 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:45:53.203Z,1513230353.203 [BPC1](ERROR): Data Fault
2017-12-14T05:45:53.239Z,1513230353.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:53.273Z,1513230353.273 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:45:53.566Z,1513230353.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:53.599Z,1513230353.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:53.990Z,1513230353.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:54.032Z,1513230354.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:54.371Z,1513230354.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:54.398Z,1513230354.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:54.412Z,1513230354.412 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:45:54.412Z,1513230354.412 [BPC1] No Fault, FailCount= 1
2017-12-14T05:45:54.757Z,1513230354.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:54.890Z,1513230354.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:55.153Z,1513230355.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:55.167Z,1513230355.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:55.570Z,1513230355.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:55.607Z,1513230355.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:55.969Z,1513230355.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:56.006Z,1513230356.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:56.369Z,1513230356.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:56.407Z,1513230356.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:56.772Z,1513230356.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:56.798Z,1513230356.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:57.199Z,1513230357.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:57.250Z,1513230357.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:57.566Z,1513230357.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:57.599Z,1513230357.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:57.978Z,1513230357.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:58.016Z,1513230358.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:58.373Z,1513230358.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:58.406Z,1513230358.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:58.762Z,1513230358.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:58.780Z,1513230358.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:59.162Z,1513230359.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:59.176Z,1513230359.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:59.569Z,1513230359.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:59.584Z,1513230359.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:45:59.966Z,1513230359.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:45:59.981Z,1513230359.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:00.391Z,1513230360.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:00.419Z,1513230360.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:00.764Z,1513230360.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:00.783Z,1513230360.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:01.165Z,1513230361.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:01.179Z,1513230361.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:01.394Z,1513230361.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:01.574Z,1513230361.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:01.588Z,1513230361.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:01.973Z,1513230361.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:01.987Z,1513230361.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:02.189Z,1513230362.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:02.375Z,1513230362.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:02.395Z,1513230362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:02.768Z,1513230362.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:02.783Z,1513230362.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:03.163Z,1513230363.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:03.222Z,1513230363.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:03.609Z,1513230363.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:03.641Z,1513230363.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:03.982Z,1513230363.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:04.003Z,1513230364.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:04.380Z,1513230364.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:04.394Z,1513230364.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:04.757Z,1513230364.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:04.793Z,1513230364.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:05.156Z,1513230365.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:05.182Z,1513230365.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:05.572Z,1513230365.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:05.592Z,1513230365.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:05.980Z,1513230365.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:05.994Z,1513230365.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:06.380Z,1513230366.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:06.395Z,1513230366.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:06.757Z,1513230366.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:06.850Z,1513230366.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:07.155Z,1513230367.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:07.185Z,1513230367.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:07.579Z,1513230367.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:07.595Z,1513230367.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:07.978Z,1513230367.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:07.999Z,1513230367.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:08.372Z,1513230368.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:08.387Z,1513230368.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:08.760Z,1513230368.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:08.788Z,1513230368.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:09.156Z,1513230369.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:09.191Z,1513230369.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:09.581Z,1513230369.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:09.596Z,1513230369.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:09.981Z,1513230369.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:10.007Z,1513230370.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:10.365Z,1513230370.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:10.396Z,1513230370.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:10.760Z,1513230370.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:10.792Z,1513230370.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:11.160Z,1513230371.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:11.192Z,1513230371.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:11.566Z,1513230371.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:11.604Z,1513230371.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:11.982Z,1513230371.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:11.000Z,1513230372.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:12.366Z,1513230372.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:12.399Z,1513230372.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:12.758Z,1513230372.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:12.796Z,1513230372.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:13.160Z,1513230373.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:13.239Z,1513230373.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:13.590Z,1513230373.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:13.605Z,1513230373.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:13.986Z,1513230373.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:14.007Z,1513230374.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:14.385Z,1513230374.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:14.403Z,1513230374.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:14.764Z,1513230374.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:14.796Z,1513230374.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:15.162Z,1513230375.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:15.242Z,1513230375.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:15.573Z,1513230375.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:15.601Z,1513230375.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:15.978Z,1513230375.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:16.047Z,1513230376.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:16.378Z,1513230376.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:16.414Z,1513230376.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:16.771Z,1513230376.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:16.815Z,1513230376.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:17.165Z,1513230377.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:17.180Z,1513230377.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:17.569Z,1513230377.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:17.584Z,1513230377.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:17.973Z,1513230377.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:17.987Z,1513230377.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:18.374Z,1513230378.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:18.407Z,1513230378.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:18.766Z,1513230378.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:18.781Z,1513230378.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:19.163Z,1513230379.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:19.178Z,1513230379.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:19.612Z,1513230379.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:19.663Z,1513230379.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:19.992Z,1513230379.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:20.030Z,1513230380.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:20.383Z,1513230380.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:20.420Z,1513230380.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:20.768Z,1513230380.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:20.821Z,1513230380.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:21.171Z,1513230381.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:21.194Z,1513230381.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:21.576Z,1513230381.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:21.595Z,1513230381.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:21.000Z,1513230382.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:22.050Z,1513230382.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:22.380Z,1513230382.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:22.435Z,1513230382.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:22.789Z,1513230382.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:22.847Z,1513230382.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:23.166Z,1513230383.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:23.195Z,1513230383.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:23.576Z,1513230383.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:23.595Z,1513230383.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:23.971Z,1513230383.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:24.047Z,1513230384.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:24.400Z,1513230384.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:24.454Z,1513230384.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:24.758Z,1513230384.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:24.804Z,1513230384.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:25.174Z,1513230385.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:25.275Z,1513230385.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:25.572Z,1513230385.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:25.619Z,1513230385.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:25.965Z,1513230385.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:26.011Z,1513230386.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:26.362Z,1513230386.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:26.391Z,1513230386.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:26.770Z,1513230386.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:26.784Z,1513230386.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:27.180Z,1513230387.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:27.218Z,1513230387.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:27.576Z,1513230387.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:27.599Z,1513230387.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:27.966Z,1513230387.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:28.008Z,1513230388.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:28.356Z,1513230388.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:28.382Z,1513230388.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:28.785Z,1513230388.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:28.802Z,1513230388.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:29.156Z,1513230389.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:29.183Z,1513230389.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:29.591Z,1513230389.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:29.606Z,1513230389.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:29.978Z,1513230389.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:30.066Z,1513230390.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:30.372Z,1513230390.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:30.413Z,1513230390.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:30.765Z,1513230390.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:30.794Z,1513230390.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:31.156Z,1513230391.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:31.192Z,1513230391.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:31.595Z,1513230391.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:31.641Z,1513230391.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:31.977Z,1513230391.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:32.045Z,1513230392.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:32.367Z,1513230392.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:32.439Z,1513230392.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:32.758Z,1513230392.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:32.807Z,1513230392.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:33.158Z,1513230393.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:33.239Z,1513230393.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:33.567Z,1513230393.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:33.588Z,1513230393.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:33.971Z,1513230393.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:34.011Z,1513230394.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:34.368Z,1513230394.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:34.391Z,1513230394.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:34.770Z,1513230394.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:34.795Z,1513230394.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:35.167Z,1513230395.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:35.182Z,1513230395.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:35.577Z,1513230395.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:35.596Z,1513230395.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:35.982Z,1513230395.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:36.038Z,1513230396.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:36.382Z,1513230396.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:36.446Z,1513230396.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:36.758Z,1513230396.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:36.878Z,1513230396.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:37.190Z,1513230397.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:37.347Z,1513230397.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:37.570Z,1513230397.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:37.593Z,1513230397.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:37.975Z,1513230397.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:37.995Z,1513230397.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:38.368Z,1513230398.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:38.427Z,1513230398.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:38.783Z,1513230398.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:38.816Z,1513230398.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:39.165Z,1513230399.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:39.231Z,1513230399.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:39.572Z,1513230399.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:39.627Z,1513230399.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:39.974Z,1513230399.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:40.045Z,1513230400.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:40.386Z,1513230400.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:40.414Z,1513230400.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:40.780Z,1513230400.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:40.828Z,1513230400.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:41.167Z,1513230401.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:41.221Z,1513230401.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:41.571Z,1513230401.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:41.591Z,1513230401.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:41.975Z,1513230401.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:42.026Z,1513230402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:42.376Z,1513230402.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:42.430Z,1513230402.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:42.769Z,1513230402.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:42.788Z,1513230402.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:43.185Z,1513230403.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:43.238Z,1513230403.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:43.579Z,1513230403.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:43.623Z,1513230403.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:43.983Z,1513230403.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:44.032Z,1513230404.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:47.715Z,1513230407.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:47.773Z,1513230407.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:47.881Z,1513230407.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:47.924Z,1513230407.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:48.228Z,1513230408.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:48.244Z,1513230408.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:48.686Z,1513230408.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:48.721Z,1513230408.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:49.026Z,1513230409.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:49.057Z,1513230409.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:49.419Z,1513230409.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:49.455Z,1513230409.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:49.831Z,1513230409.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:49.863Z,1513230409.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:50.243Z,1513230410.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:50.259Z,1513230410.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:50.686Z,1513230410.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:50.708Z,1513230410.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:51.039Z,1513230411.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:51.071Z,1513230411.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:51.435Z,1513230411.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:51.450Z,1513230411.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:51.829Z,1513230411.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:51.843Z,1513230411.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:52.218Z,1513230412.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:52.237Z,1513230412.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:52.699Z,1513230412.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:52.734Z,1513230412.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:53.050Z,1513230413.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:53.077Z,1513230413.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:53.450Z,1513230413.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:53.464Z,1513230413.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:53.836Z,1513230413.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:53.852Z,1513230413.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:54.231Z,1513230414.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:54.259Z,1513230414.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:54.626Z,1513230414.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:54.698Z,1513230414.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:55.046Z,1513230415.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:55.082Z,1513230415.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:55.438Z,1513230415.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:55.452Z,1513230415.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:55.841Z,1513230415.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:55.877Z,1513230415.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:56.235Z,1513230416.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:56.250Z,1513230416.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:56.632Z,1513230416.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:56.651Z,1513230416.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:57.059Z,1513230417.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:57.085Z,1513230417.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:57.426Z,1513230417.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:57.446Z,1513230417.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:57.837Z,1513230417.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:57.852Z,1513230417.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:58.241Z,1513230418.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:58.255Z,1513230418.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:58.637Z,1513230418.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:58.659Z,1513230418.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:59.075Z,1513230419.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:59.116Z,1513230419.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:59.428Z,1513230419.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:59.475Z,1513230419.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:46:59.828Z,1513230419.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:46:59.898Z,1513230419.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:00.235Z,1513230420.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:00.250Z,1513230420.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:00.691Z,1513230420.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:00.751Z,1513230420.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:01.030Z,1513230421.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:01.067Z,1513230421.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:01.448Z,1513230421.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:01.510Z,1513230421.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:01.829Z,1513230421.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:01.862Z,1513230421.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:02.220Z,1513230422.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:02.239Z,1513230422.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:02.690Z,1513230422.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:02.730Z,1513230422.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:03.023Z,1513230423.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:03.054Z,1513230423.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:03.431Z,1513230423.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:03.459Z,1513230423.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:03.836Z,1513230423.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:03.860Z,1513230423.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:04.234Z,1513230424.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:04.260Z,1513230424.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:04.683Z,1513230424.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:04.722Z,1513230424.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:05.022Z,1513230425.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:05.060Z,1513230425.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:05.423Z,1513230425.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:05.459Z,1513230425.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:05.822Z,1513230425.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:05.854Z,1513230425.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:06.234Z,1513230426.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:06.248Z,1513230426.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:06.681Z,1513230426.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:06.712Z,1513230426.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:07.036Z,1513230427.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:07.051Z,1513230427.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:07.441Z,1513230427.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:07.472Z,1513230427.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:07.833Z,1513230427.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:07.871Z,1513230427.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:08.231Z,1513230428.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:08.251Z,1513230428.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:08.690Z,1513230428.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:08.748Z,1513230428.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:09.027Z,1513230429.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:09.070Z,1513230429.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:09.420Z,1513230429.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:09.459Z,1513230429.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:09.849Z,1513230429.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:09.902Z,1513230429.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:10.238Z,1513230430.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:10.266Z,1513230430.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:10.640Z,1513230430.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:10.664Z,1513230430.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:11.050Z,1513230431.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:11.090Z,1513230431.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:11.431Z,1513230431.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:11.447Z,1513230431.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:11.826Z,1513230431.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:11.845Z,1513230431.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:12.231Z,1513230432.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:12.253Z,1513230432.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:12.612Z,1513230432.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:12.646Z,1513230432.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:13.063Z,1513230433.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:13.087Z,1513230433.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:13.440Z,1513230433.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:13.468Z,1513230433.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:13.842Z,1513230433.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:13.857Z,1513230433.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:14.235Z,1513230434.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:14.250Z,1513230434.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:14.678Z,1513230434.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:14.712Z,1513230434.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:15.058Z,1513230435.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:15.088Z,1513230435.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:15.419Z,1513230435.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:15.454Z,1513230435.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:15.869Z,1513230435.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:15.904Z,1513230435.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:16.225Z,1513230436.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:16.263Z,1513230436.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:16.677Z,1513230436.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:16.712Z,1513230436.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:17.023Z,1513230437.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:17.056Z,1513230437.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:17.426Z,1513230437.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:17.461Z,1513230437.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:17.831Z,1513230437.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:17.859Z,1513230437.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:18.238Z,1513230438.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:18.275Z,1513230438.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:18.679Z,1513230438.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:18.694Z,1513230438.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:19.054Z,1513230439.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:19.075Z,1513230439.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:19.445Z,1513230439.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:19.460Z,1513230439.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:19.838Z,1513230439.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:19.853Z,1513230439.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:20.223Z,1513230440.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:20.292Z,1513230440.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:20.683Z,1513230440.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:20.722Z,1513230440.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:21.028Z,1513230441.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:21.055Z,1513230441.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:21.443Z,1513230441.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:21.475Z,1513230441.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:21.830Z,1513230441.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:21.924Z,1513230441.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:22.229Z,1513230442.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:22.257Z,1513230442.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:22.638Z,1513230442.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:22.722Z,1513230442.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:23.038Z,1513230443.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:23.090Z,1513230443.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:23.432Z,1513230443.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:23.446Z,1513230443.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:23.822Z,1513230443.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:23.875Z,1513230443.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:24.227Z,1513230444.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:24.253Z,1513230444.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:24.654Z,1513230444.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:24.683Z,1513230444.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:25.053Z,1513230445.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:25.088Z,1513230445.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:25.441Z,1513230445.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:25.455Z,1513230445.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:25.840Z,1513230445.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:25.854Z,1513230445.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:26.232Z,1513230446.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:26.251Z,1513230446.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:26.634Z,1513230446.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:26.648Z,1513230446.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:27.047Z,1513230447.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:27.082Z,1513230447.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:27.450Z,1513230447.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:27.464Z,1513230447.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:27.852Z,1513230447.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:27.875Z,1513230447.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:28.234Z,1513230448.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:28.279Z,1513230448.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:28.683Z,1513230448.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:28.715Z,1513230448.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:29.031Z,1513230449.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:29.061Z,1513230449.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:29.430Z,1513230449.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:29.444Z,1513230449.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:29.824Z,1513230449.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:29.848Z,1513230449.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:30.228Z,1513230450.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:30.247Z,1513230450.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:30.679Z,1513230450.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:30.714Z,1513230450.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:31.050Z,1513230451.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:31.093Z,1513230451.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:31.443Z,1513230451.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:31.473Z,1513230451.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:31.830Z,1513230451.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:31.851Z,1513230451.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:32.219Z,1513230452.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:32.278Z,1513230452.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:32.672Z,1513230452.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:32.708Z,1513230452.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:33.027Z,1513230453.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:33.044Z,1513230453.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:33.431Z,1513230453.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:33.471Z,1513230453.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:33.838Z,1513230453.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:33.871Z,1513230453.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:34.266Z,1513230454.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:34.293Z,1513230454.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:34.699Z,1513230454.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:34.726Z,1513230454.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:35.019Z,1513230455.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:35.063Z,1513230455.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:35.422Z,1513230455.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:35.457Z,1513230455.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:35.813Z,1513230455.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:35.828Z,1513230455.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:36.224Z,1513230456.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:36.259Z,1513230456.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:36.626Z,1513230456.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:36.708Z,1513230456.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:37.030Z,1513230457.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:37.048Z,1513230457.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:37.452Z,1513230457.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:37.487Z,1513230457.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:37.835Z,1513230457.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:37.851Z,1513230457.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:38.212Z,1513230458.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:38.239Z,1513230458.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:38.626Z,1513230458.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:38.647Z,1513230458.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:39.042Z,1513230459.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:39.082Z,1513230459.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:39.423Z,1513230459.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:39.456Z,1513230459.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:39.836Z,1513230459.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:39.855Z,1513230459.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:40.243Z,1513230460.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:40.263Z,1513230460.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:40.655Z,1513230460.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:40.695Z,1513230460.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:41.047Z,1513230461.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:41.093Z,1513230461.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:41.419Z,1513230461.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:41.451Z,1513230461.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:41.819Z,1513230461.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:41.851Z,1513230461.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:42.223Z,1513230462.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:42.259Z,1513230462.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:42.679Z,1513230462.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:42.711Z,1513230462.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:43.040Z,1513230463.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:43.075Z,1513230463.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:43.435Z,1513230463.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:43.450Z,1513230463.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:43.878Z,1513230463.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:43.927Z,1513230463.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:44.236Z,1513230464.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:44.368Z,1513230464.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:47.727Z,1513230467.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:47.772Z,1513230467.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:47.868Z,1513230467.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:47.914Z,1513230467.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:48.254Z,1513230468.254 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:47:48.254Z,1513230468.254 [NAL9602] Data Fault, FailCount= 4
2017-12-14T05:47:48.254Z,1513230468.254 [NAL9602](ERROR): Data Fault
2017-12-14T05:47:48.271Z,1513230468.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:48.313Z,1513230468.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:48.326Z,1513230468.326 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:47:48.675Z,1513230468.675 [NAL9602](INFO): Powering down
2017-12-14T05:47:48.706Z,1513230468.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:48.762Z,1513230468.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:49.078Z,1513230469.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:49.097Z,1513230469.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:49.476Z,1513230469.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:49.534Z,1513230469.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:49.548Z,1513230469.548 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T05:47:49.548Z,1513230469.548 [NAL9602] No Fault, FailCount= 4
2017-12-14T05:47:49.870Z,1513230469.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:49.885Z,1513230469.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:50.281Z,1513230470.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:50.325Z,1513230470.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:50.717Z,1513230470.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:50.765Z,1513230470.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:51.069Z,1513230471.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:51.090Z,1513230471.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:51.465Z,1513230471.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:51.494Z,1513230471.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:51.864Z,1513230471.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:51.895Z,1513230471.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:52.256Z,1513230472.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:52.271Z,1513230472.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:52.662Z,1513230472.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:52.686Z,1513230472.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:53.063Z,1513230473.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:53.098Z,1513230473.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:53.501Z,1513230473.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:53.516Z,1513230473.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:53.868Z,1513230473.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:53.900Z,1513230473.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:54.273Z,1513230474.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:54.313Z,1513230474.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:54.663Z,1513230474.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:54.677Z,1513230474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:55.085Z,1513230475.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:55.122Z,1513230475.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:55.469Z,1513230475.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:55.483Z,1513230475.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:55.870Z,1513230475.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:55.885Z,1513230475.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:56.264Z,1513230476.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:56.287Z,1513230476.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:56.722Z,1513230476.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:56.778Z,1513230476.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:57.082Z,1513230477.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:57.098Z,1513230477.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:57.471Z,1513230477.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:57.485Z,1513230477.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:57.868Z,1513230477.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:57.918Z,1513230477.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:58.275Z,1513230478.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:58.290Z,1513230478.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:58.710Z,1513230478.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:58.731Z,1513230478.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:59.068Z,1513230479.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:59.092Z,1513230479.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:59.474Z,1513230479.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:59.489Z,1513230479.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:47:59.874Z,1513230479.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:47:59.910Z,1513230479.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:00.262Z,1513230480.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:00.300Z,1513230480.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:00.710Z,1513230480.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:00.725Z,1513230480.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:01.062Z,1513230481.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:01.094Z,1513230481.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:01.463Z,1513230481.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:01.503Z,1513230481.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:01.866Z,1513230481.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:01.880Z,1513230481.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:02.260Z,1513230482.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:02.275Z,1513230482.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:02.693Z,1513230482.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:02.724Z,1513230482.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:03.078Z,1513230483.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:03.152Z,1513230483.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:03.462Z,1513230483.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:03.499Z,1513230483.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:03.866Z,1513230483.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:03.891Z,1513230483.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:04.262Z,1513230484.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:04.289Z,1513230484.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:04.714Z,1513230484.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:04.766Z,1513230484.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:05.067Z,1513230485.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:05.107Z,1513230485.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:05.479Z,1513230485.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:05.503Z,1513230485.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:05.874Z,1513230485.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:05.900Z,1513230485.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:06.295Z,1513230486.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:06.326Z,1513230486.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:06.662Z,1513230486.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:06.698Z,1513230486.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:07.067Z,1513230487.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:07.151Z,1513230487.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:07.463Z,1513230487.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:07.499Z,1513230487.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:07.863Z,1513230487.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:07.894Z,1513230487.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:08.270Z,1513230488.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:08.304Z,1513230488.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:08.662Z,1513230488.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:08.703Z,1513230488.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:09.066Z,1513230489.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:09.115Z,1513230489.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:09.496Z,1513230489.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:09.529Z,1513230489.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:09.882Z,1513230489.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:09.939Z,1513230489.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:10.274Z,1513230490.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:10.328Z,1513230490.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:10.694Z,1513230490.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:10.734Z,1513230490.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:11.078Z,1513230491.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:11.100Z,1513230491.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:11.473Z,1513230491.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:11.511Z,1513230491.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:11.873Z,1513230491.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:11.887Z,1513230491.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:12.279Z,1513230492.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:12.335Z,1513230492.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:12.731Z,1513230492.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:12.776Z,1513230492.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:13.066Z,1513230493.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:13.097Z,1513230493.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:13.478Z,1513230493.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:13.499Z,1513230493.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:13.877Z,1513230493.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:13.891Z,1513230493.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:14.272Z,1513230494.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:14.290Z,1513230494.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:14.685Z,1513230494.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:14.708Z,1513230494.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:15.064Z,1513230495.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:15.091Z,1513230495.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:15.463Z,1513230495.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:15.491Z,1513230495.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:15.862Z,1513230495.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:15.883Z,1513230495.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:16.263Z,1513230496.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:16.310Z,1513230496.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:16.680Z,1513230496.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:16.718Z,1513230496.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:17.066Z,1513230497.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:17.091Z,1513230497.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:17.463Z,1513230497.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:17.499Z,1513230497.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:17.863Z,1513230497.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:17.878Z,1513230497.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:18.263Z,1513230498.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:18.299Z,1513230498.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:18.712Z,1513230498.712 [NAL9602](INFO): Powering up NAL9602
2017-12-14T05:48:18.749Z,1513230498.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:18.783Z,1513230498.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:19.064Z,1513230499.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:19.107Z,1513230499.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:19.470Z,1513230499.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:19.501Z,1513230499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:19.866Z,1513230499.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:19.881Z,1513230499.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:20.270Z,1513230500.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:20.285Z,1513230500.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:20.666Z,1513230500.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:20.712Z,1513230500.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:21.070Z,1513230501.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:21.092Z,1513230501.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:21.470Z,1513230501.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:21.485Z,1513230501.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:21.871Z,1513230501.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:21.885Z,1513230501.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:22.303Z,1513230502.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:22.329Z,1513230502.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:22.669Z,1513230502.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:22.692Z,1513230502.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:23.074Z,1513230503.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:23.095Z,1513230503.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:23.479Z,1513230503.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:23.493Z,1513230503.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:23.873Z,1513230503.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:23.936Z,1513230503.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:24.270Z,1513230504.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:24.295Z,1513230504.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:24.692Z,1513230504.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:24.740Z,1513230504.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:25.062Z,1513230505.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:25.093Z,1513230505.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:25.487Z,1513230505.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:25.514Z,1513230505.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:25.868Z,1513230505.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:25.908Z,1513230505.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:26.262Z,1513230506.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:26.285Z,1513230506.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:26.703Z,1513230506.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:26.727Z,1513230506.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:27.074Z,1513230507.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:27.090Z,1513230507.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:27.478Z,1513230507.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:27.493Z,1513230507.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:27.875Z,1513230507.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:27.895Z,1513230507.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:28.276Z,1513230508.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:28.295Z,1513230508.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:28.735Z,1513230508.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:28.768Z,1513230508.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:29.091Z,1513230509.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:29.106Z,1513230509.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:29.488Z,1513230509.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:29.503Z,1513230509.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:29.851Z,1513230509.851 [NAL9602](INFO): NAL9602 initialized
2017-12-14T05:48:29.868Z,1513230509.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:29.904Z,1513230509.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:30.264Z,1513230510.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:30.299Z,1513230510.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:30.704Z,1513230510.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:30.741Z,1513230510.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:31.086Z,1513230511.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:31.117Z,1513230511.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:31.496Z,1513230511.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:31.511Z,1513230511.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:31.872Z,1513230511.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:31.880Z,1513230511.880 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:48:31.880Z,1513230511.880 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:48:31.880Z,1513230511.880 [BPC1](ERROR): Data Fault
2017-12-14T05:48:31.959Z,1513230511.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:32.005Z,1513230512.005 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:48:32.274Z,1513230512.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:32.306Z,1513230512.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:32.730Z,1513230512.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:32.756Z,1513230512.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:33.090Z,1513230513.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:33.112Z,1513230513.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:33.126Z,1513230513.126 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:48:33.126Z,1513230513.126 [BPC1] No Fault, FailCount= 1
2017-12-14T05:48:33.477Z,1513230513.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:33.558Z,1513230513.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:33.874Z,1513230513.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:33.888Z,1513230513.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:34.271Z,1513230514.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:34.286Z,1513230514.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:34.670Z,1513230514.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:34.691Z,1513230514.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:35.083Z,1513230515.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:35.126Z,1513230515.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:35.482Z,1513230515.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:35.496Z,1513230515.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:35.860Z,1513230515.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:35.892Z,1513230515.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:36.287Z,1513230516.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:36.301Z,1513230516.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:36.688Z,1513230516.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:36.704Z,1513230516.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:37.087Z,1513230517.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:37.103Z,1513230517.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:37.463Z,1513230517.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:37.490Z,1513230517.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:37.880Z,1513230517.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:37.895Z,1513230517.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:38.294Z,1513230518.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:38.334Z,1513230518.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:38.693Z,1513230518.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:38.737Z,1513230518.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:39.092Z,1513230519.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:39.108Z,1513230519.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:39.485Z,1513230519.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:39.500Z,1513230519.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:39.889Z,1513230519.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:39.904Z,1513230519.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:40.267Z,1513230520.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:40.303Z,1513230520.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:40.696Z,1513230520.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:40.715Z,1513230520.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:41.063Z,1513230521.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:41.100Z,1513230521.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:41.482Z,1513230521.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:41.532Z,1513230521.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:41.868Z,1513230521.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:41.923Z,1513230521.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:42.277Z,1513230522.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:42.311Z,1513230522.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:42.716Z,1513230522.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:42.731Z,1513230522.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:43.079Z,1513230523.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:43.108Z,1513230523.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:43.468Z,1513230523.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:43.503Z,1513230523.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:43.867Z,1513230523.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:43.887Z,1513230523.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:44.272Z,1513230524.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:44.288Z,1513230524.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:47.771Z,1513230527.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:47.787Z,1513230527.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:47.901Z,1513230527.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:47.939Z,1513230527.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:48.269Z,1513230528.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:48.291Z,1513230528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:48.658Z,1513230528.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:48.687Z,1513230528.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:48.687Z,1513230528.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2017-12-14T05:48:48.687Z,1513230528.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:48:48.689Z,1513230528.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:48.689Z,1513230528.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106
2017-12-14T05:48:48.689Z,1513230528.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:48:48.691Z,1513230528.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:48.691Z,1513230528.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2017-12-14T05:48:48.691Z,1513230528.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:48:48.704Z,1513230528.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:48:48.704Z,1513230528.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:48:48.704Z,1513230528.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:48:49.054Z,1513230529.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:49.116Z,1513230529.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:48:49.116Z,1513230529.116 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2017-12-14T05:48:49.121Z,1513230529.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:48:49.121Z,1513230529.121 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106
2017-12-14T05:48:49.121Z,1513230529.121 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:48:49.121Z,1513230529.121 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2017-12-14T05:48:49.441Z,1513230529.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:49.460Z,1513230529.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:48:49.465Z,1513230529.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:48:49.465Z,1513230529.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:48:49.466Z,1513230529.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:48:49.466Z,1513230529.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:48:49.467Z,1513230529.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:48:49.467Z,1513230529.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:48:49.467Z,1513230529.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:48:49.468Z,1513230529.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:48:49.840Z,1513230529.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:49.868Z,1513230529.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:50.257Z,1513230530.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:50.272Z,1513230530.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:50.662Z,1513230530.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:50.683Z,1513230530.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:51.071Z,1513230531.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:51.119Z,1513230531.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:51.434Z,1513230531.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:51.472Z,1513230531.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:51.835Z,1513230531.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:51.849Z,1513230531.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:52.244Z,1513230532.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:52.258Z,1513230532.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:52.698Z,1513230532.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:52.737Z,1513230532.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:53.051Z,1513230533.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:53.071Z,1513230533.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:53.451Z,1513230533.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:53.465Z,1513230533.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:53.847Z,1513230533.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:53.896Z,1513230533.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:54.247Z,1513230534.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:54.324Z,1513230534.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:54.687Z,1513230534.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:54.712Z,1513230534.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:55.041Z,1513230535.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:55.104Z,1513230535.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:55.440Z,1513230535.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:55.475Z,1513230535.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:55.839Z,1513230535.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:55.895Z,1513230535.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:56.251Z,1513230536.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:56.285Z,1513230536.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:56.700Z,1513230536.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:56.728Z,1513230536.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:57.050Z,1513230537.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:57.075Z,1513230537.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:57.463Z,1513230537.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:57.495Z,1513230537.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:57.855Z,1513230537.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:57.875Z,1513230537.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:58.238Z,1513230538.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:58.266Z,1513230538.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:58.710Z,1513230538.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:58.732Z,1513230538.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:59.058Z,1513230539.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:59.076Z,1513230539.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:59.458Z,1513230539.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:59.472Z,1513230539.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:48:59.858Z,1513230539.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:48:59.873Z,1513230539.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:00.239Z,1513230540.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:00.271Z,1513230540.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:00.723Z,1513230540.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:00.795Z,1513230540.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:01.050Z,1513230541.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:01.074Z,1513230541.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:01.448Z,1513230541.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:01.463Z,1513230541.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:01.834Z,1513230541.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:01.860Z,1513230541.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:02.255Z,1513230542.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:02.282Z,1513230542.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:02.658Z,1513230542.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:02.673Z,1513230542.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:03.055Z,1513230543.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:03.090Z,1513230543.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:03.442Z,1513230543.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:03.457Z,1513230543.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:03.842Z,1513230543.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:03.857Z,1513230543.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:04.255Z,1513230544.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:04.303Z,1513230544.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:04.640Z,1513230544.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:04.674Z,1513230544.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:05.068Z,1513230545.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:05.083Z,1513230545.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:05.462Z,1513230545.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:05.480Z,1513230545.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:05.858Z,1513230545.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:05.873Z,1513230545.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:06.236Z,1513230546.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:06.271Z,1513230546.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:06.695Z,1513230546.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:06.732Z,1513230546.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:07.083Z,1513230547.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:07.126Z,1513230547.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:07.442Z,1513230547.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:07.476Z,1513230547.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:07.840Z,1513230547.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:07.855Z,1513230547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:07.921Z,1513230547.921 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:49:08.253Z,1513230548.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:08.287Z,1513230548.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:08.709Z,1513230548.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:08.742Z,1513230548.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:09.055Z,1513230549.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:09.078Z,1513230549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:09.447Z,1513230549.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:09.464Z,1513230549.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:09.846Z,1513230549.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:09.867Z,1513230549.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:10.285Z,1513230550.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:10.313Z,1513230550.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:10.697Z,1513230550.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:10.725Z,1513230550.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:11.063Z,1513230551.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:11.078Z,1513230551.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:11.457Z,1513230551.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:11.472Z,1513230551.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:11.853Z,1513230551.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:11.869Z,1513230551.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:12.247Z,1513230552.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:12.267Z,1513230552.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:12.696Z,1513230552.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:12.715Z,1513230552.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:13.046Z,1513230553.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:13.068Z,1513230553.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:13.475Z,1513230553.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:13.510Z,1513230553.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:13.835Z,1513230553.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:13.867Z,1513230553.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:14.259Z,1513230554.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:14.274Z,1513230554.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:14.713Z,1513230554.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:14.744Z,1513230554.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:15.050Z,1513230555.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:15.090Z,1513230555.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:15.435Z,1513230555.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:15.451Z,1513230555.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:15.840Z,1513230555.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:15.854Z,1513230555.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:16.243Z,1513230556.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:16.279Z,1513230556.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:16.652Z,1513230556.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:16.697Z,1513230556.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:17.070Z,1513230557.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:17.111Z,1513230557.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:17.457Z,1513230557.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:17.488Z,1513230557.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:17.850Z,1513230557.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:17.864Z,1513230557.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:18.241Z,1513230558.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:18.291Z,1513230558.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:18.643Z,1513230558.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:18.659Z,1513230558.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:19.047Z,1513230559.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:19.100Z,1513230559.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:19.445Z,1513230559.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:19.459Z,1513230559.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:19.872Z,1513230559.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:19.941Z,1513230559.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:20.251Z,1513230560.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:20.271Z,1513230560.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:20.694Z,1513230560.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:20.719Z,1513230560.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:21.056Z,1513230561.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:21.075Z,1513230561.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:21.447Z,1513230561.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:21.500Z,1513230561.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:21.846Z,1513230561.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:21.861Z,1513230561.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:22.246Z,1513230562.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:22.260Z,1513230562.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:22.683Z,1513230562.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:22.714Z,1513230562.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:23.086Z,1513230563.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:23.121Z,1513230563.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:23.449Z,1513230563.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:23.477Z,1513230563.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:23.850Z,1513230563.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:23.876Z,1513230563.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:24.242Z,1513230564.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:24.279Z,1513230564.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:24.693Z,1513230564.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:24.731Z,1513230564.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:25.048Z,1513230565.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:25.086Z,1513230565.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:25.436Z,1513230565.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:25.451Z,1513230565.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:25.843Z,1513230565.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:25.857Z,1513230565.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:26.257Z,1513230566.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:26.290Z,1513230566.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:26.695Z,1513230566.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:26.716Z,1513230566.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:27.062Z,1513230567.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:27.083Z,1513230567.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:27.447Z,1513230567.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:27.503Z,1513230567.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:27.844Z,1513230567.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:27.860Z,1513230567.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:28.246Z,1513230568.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:28.261Z,1513230568.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:28.641Z,1513230568.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:28.741Z,1513230568.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:29.063Z,1513230569.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:29.086Z,1513230569.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:29.479Z,1513230569.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:29.515Z,1513230569.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:29.853Z,1513230569.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:29.876Z,1513230569.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:30.246Z,1513230570.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:30.275Z,1513230570.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:30.634Z,1513230570.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:30.649Z,1513230570.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:31.036Z,1513230571.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:31.079Z,1513230571.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:31.444Z,1513230571.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:31.459Z,1513230571.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:31.842Z,1513230571.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:31.858Z,1513230571.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:32.245Z,1513230572.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:32.260Z,1513230572.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:32.656Z,1513230572.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:32.696Z,1513230572.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:33.046Z,1513230573.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:33.074Z,1513230573.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:33.444Z,1513230573.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:33.463Z,1513230573.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:33.852Z,1513230573.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:33.867Z,1513230573.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:34.242Z,1513230574.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:34.271Z,1513230574.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:34.683Z,1513230574.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:34.715Z,1513230574.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:35.061Z,1513230575.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:35.076Z,1513230575.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:35.458Z,1513230575.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:35.472Z,1513230575.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:35.863Z,1513230575.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:35.903Z,1513230575.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:36.254Z,1513230576.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:36.275Z,1513230576.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:36.690Z,1513230576.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:36.704Z,1513230576.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:37.038Z,1513230577.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:37.065Z,1513230577.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:37.450Z,1513230577.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:37.465Z,1513230577.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:37.848Z,1513230577.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:37.863Z,1513230577.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:38.251Z,1513230578.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:38.266Z,1513230578.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:38.697Z,1513230578.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:38.720Z,1513230578.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:39.074Z,1513230579.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:39.114Z,1513230579.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:39.435Z,1513230579.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:39.519Z,1513230579.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:39.835Z,1513230579.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:39.862Z,1513230579.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:40.255Z,1513230580.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:40.309Z,1513230580.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:40.711Z,1513230580.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:40.726Z,1513230580.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:41.063Z,1513230581.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:41.116Z,1513230581.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:41.459Z,1513230581.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:41.479Z,1513230581.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:41.854Z,1513230581.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:41.868Z,1513230581.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:42.243Z,1513230582.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:42.318Z,1513230582.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:42.635Z,1513230582.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:42.717Z,1513230582.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:43.046Z,1513230583.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:43.064Z,1513230583.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:43.453Z,1513230583.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:43.468Z,1513230583.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:43.836Z,1513230583.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:43.861Z,1513230583.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:44.250Z,1513230584.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:44.274Z,1513230584.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:44.661Z,1513230584.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:44.676Z,1513230584.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:48.079Z,1513230588.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:48.094Z,1513230588.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:48.196Z,1513230588.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:48.239Z,1513230588.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:48.572Z,1513230588.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:48.590Z,1513230588.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:48.978Z,1513230588.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:48.999Z,1513230588.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:49.374Z,1513230589.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:49.426Z,1513230589.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:49.774Z,1513230589.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:49.795Z,1513230589.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:50.189Z,1513230590.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:50.204Z,1513230590.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:50.588Z,1513230590.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:50.679Z,1513230590.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:50.982Z,1513230590.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:51.004Z,1513230591.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:51.367Z,1513230591.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:51.398Z,1513230591.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:51.770Z,1513230591.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:51.803Z,1513230591.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:52.172Z,1513230592.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:52.203Z,1513230592.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:52.566Z,1513230592.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:52.625Z,1513230592.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:52.998Z,1513230592.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:53.025Z,1513230593.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:53.382Z,1513230593.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:53.396Z,1513230593.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:53.781Z,1513230593.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:53.796Z,1513230593.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:54.179Z,1513230594.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:54.194Z,1513230594.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:54.579Z,1513230594.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:54.594Z,1513230594.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:55.047Z,1513230595.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:55.091Z,1513230595.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:55.389Z,1513230595.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:55.405Z,1513230595.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:55.785Z,1513230595.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:55.800Z,1513230595.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:56.167Z,1513230596.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:56.199Z,1513230596.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:56.571Z,1513230596.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:56.597Z,1513230596.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:56.978Z,1513230596.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:57.006Z,1513230597.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:57.396Z,1513230597.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:57.410Z,1513230597.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:57.790Z,1513230597.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:57.811Z,1513230597.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:58.195Z,1513230598.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:58.220Z,1513230598.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:58.575Z,1513230598.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:58.606Z,1513230598.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:59.041Z,1513230599.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:59.086Z,1513230599.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:59.390Z,1513230599.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:59.415Z,1513230599.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:49:59.782Z,1513230599.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:49:59.817Z,1513230599.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:00.174Z,1513230600.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:00.200Z,1513230600.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:00.578Z,1513230600.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:00.594Z,1513230600.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:01.037Z,1513230601.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:01.107Z,1513230601.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:01.410Z,1513230601.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:01.475Z,1513230601.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:01.791Z,1513230601.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:01.816Z,1513230601.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:02.172Z,1513230602.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:02.219Z,1513230602.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:02.575Z,1513230602.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:02.631Z,1513230602.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:02.985Z,1513230602.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:03.048Z,1513230603.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:03.389Z,1513230603.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:03.404Z,1513230603.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:03.787Z,1513230603.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:03.803Z,1513230603.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:04.171Z,1513230604.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:04.202Z,1513230604.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:04.579Z,1513230604.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:04.662Z,1513230604.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:04.997Z,1513230604.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:05.016Z,1513230605.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:05.389Z,1513230605.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:05.404Z,1513230605.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:05.791Z,1513230605.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:05.807Z,1513230605.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:06.172Z,1513230606.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:06.203Z,1513230606.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:06.566Z,1513230606.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:06.651Z,1513230606.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:06.980Z,1513230606.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:06.995Z,1513230606.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:07.381Z,1513230607.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:07.396Z,1513230607.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:07.781Z,1513230607.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:07.795Z,1513230607.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:08.183Z,1513230608.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:08.197Z,1513230608.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:08.560Z,1513230608.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:08.595Z,1513230608.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:08.984Z,1513230608.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:09.003Z,1513230609.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:09.387Z,1513230609.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:09.415Z,1513230609.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:09.782Z,1513230609.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:09.801Z,1513230609.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:10.168Z,1513230610.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:10.194Z,1513230610.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:10.572Z,1513230610.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:10.637Z,1513230610.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:10.992Z,1513230610.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:11.014Z,1513230611.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:11.389Z,1513230611.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:11.443Z,1513230611.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:11.789Z,1513230611.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:11.811Z,1513230611.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:12.168Z,1513230612.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:12.191Z,1513230612.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:12.570Z,1513230612.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:12.607Z,1513230612.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:13.039Z,1513230613.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:13.079Z,1513230613.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:13.385Z,1513230613.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:13.415Z,1513230613.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:13.786Z,1513230613.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:13.816Z,1513230613.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:14.186Z,1513230614.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:14.224Z,1513230614.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:14.578Z,1513230614.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:14.593Z,1513230614.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:15.074Z,1513230615.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:15.088Z,1513230615.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:15.389Z,1513230615.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:15.411Z,1513230615.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:15.789Z,1513230615.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:15.805Z,1513230615.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:16.181Z,1513230616.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:16.196Z,1513230616.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:16.581Z,1513230616.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:16.595Z,1513230616.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:16.996Z,1513230616.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:17.010Z,1513230617.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:17.395Z,1513230617.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:17.418Z,1513230617.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:17.777Z,1513230617.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:17.811Z,1513230617.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:18.171Z,1513230618.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:18.202Z,1513230618.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:18.567Z,1513230618.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:18.668Z,1513230618.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:18.991Z,1513230618.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:19.011Z,1513230619.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:19.390Z,1513230619.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:19.411Z,1513230619.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:19.790Z,1513230619.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:19.811Z,1513230619.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:20.171Z,1513230620.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:20.205Z,1513230620.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:20.666Z,1513230620.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:20.731Z,1513230620.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:20.989Z,1513230620.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:21.023Z,1513230621.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:21.385Z,1513230621.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:21.420Z,1513230621.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:21.790Z,1513230621.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:21.821Z,1513230621.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:22.174Z,1513230622.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:22.190Z,1513230622.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:22.571Z,1513230622.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:22.627Z,1513230622.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:22.981Z,1513230622.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:22.996Z,1513230622.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:23.385Z,1513230623.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:23.446Z,1513230623.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:23.786Z,1513230623.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:23.853Z,1513230623.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:24.168Z,1513230624.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:24.194Z,1513230624.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:24.566Z,1513230624.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:24.628Z,1513230624.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:24.996Z,1513230624.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:25.014Z,1513230625.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:25.393Z,1513230625.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:25.447Z,1513230625.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:25.782Z,1513230625.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:25.808Z,1513230625.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:26.175Z,1513230626.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:26.201Z,1513230626.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:26.572Z,1513230626.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:26.603Z,1513230626.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:27.048Z,1513230627.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:27.072Z,1513230627.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:27.429Z,1513230627.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:27.455Z,1513230627.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:27.778Z,1513230627.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:27.816Z,1513230627.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:28.172Z,1513230628.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:28.191Z,1513230628.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:28.572Z,1513230628.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:28.587Z,1513230628.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:29.046Z,1513230629.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:29.061Z,1513230629.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:29.392Z,1513230629.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:29.407Z,1513230629.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:29.790Z,1513230629.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:29.808Z,1513230629.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:30.179Z,1513230630.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:30.194Z,1513230630.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:30.566Z,1513230630.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:30.595Z,1513230630.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:30.976Z,1513230630.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:31.010Z,1513230631.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:31.395Z,1513230631.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:31.410Z,1513230631.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:31.786Z,1513230631.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:31.807Z,1513230631.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:32.167Z,1513230632.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:32.198Z,1513230632.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:32.571Z,1513230632.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:32.595Z,1513230632.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:32.985Z,1513230632.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:33.015Z,1513230633.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:33.382Z,1513230633.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:33.409Z,1513230633.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:33.778Z,1513230633.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:33.827Z,1513230633.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:34.171Z,1513230634.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:34.207Z,1513230634.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:34.574Z,1513230634.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:34.589Z,1513230634.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:34.994Z,1513230634.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:35.009Z,1513230635.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:35.394Z,1513230635.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:35.409Z,1513230635.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:35.784Z,1513230635.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:35.810Z,1513230635.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:36.172Z,1513230636.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:36.207Z,1513230636.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:36.571Z,1513230636.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:36.713Z,1513230636.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:36.997Z,1513230636.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:37.019Z,1513230637.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:37.395Z,1513230637.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:37.410Z,1513230637.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:37.788Z,1513230637.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:37.816Z,1513230637.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:38.173Z,1513230638.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:38.200Z,1513230638.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:38.571Z,1513230638.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:38.603Z,1513230638.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:38.986Z,1513230638.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:39.009Z,1513230639.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:39.386Z,1513230639.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:39.408Z,1513230639.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:39.786Z,1513230639.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:39.815Z,1513230639.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:39.910Z,1513230639.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:40.187Z,1513230640.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:40.211Z,1513230640.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:40.579Z,1513230640.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:40.618Z,1513230640.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:40.705Z,1513230640.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:41.035Z,1513230641.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:41.062Z,1513230641.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:41.381Z,1513230641.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:41.396Z,1513230641.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:41.778Z,1513230641.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:41.793Z,1513230641.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:42.175Z,1513230642.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:42.190Z,1513230642.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:42.574Z,1513230642.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:42.592Z,1513230642.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:43.045Z,1513230643.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:43.096Z,1513230643.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:43.390Z,1513230643.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:43.405Z,1513230643.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:43.778Z,1513230643.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:43.811Z,1513230643.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:44.171Z,1513230644.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:44.209Z,1513230644.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:44.571Z,1513230644.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:44.682Z,1513230644.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:44.989Z,1513230644.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:45.011Z,1513230645.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:48.382Z,1513230648.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:48.486Z,1513230648.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:48.490Z,1513230648.490 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:45:47.1Z
2017-12-14T05:50:48.491Z,1513230648.491 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T05:50:48.491Z,1513230648.491 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T05:50:48.590Z,1513230648.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:48.668Z,1513230648.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:49.386Z,1513230649.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:49.435Z,1513230649.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:49.569Z,1513230649.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:49.624Z,1513230649.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:49.951Z,1513230649.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:49.999Z,1513230649.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:50.353Z,1513230650.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:50.383Z,1513230650.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:53.766Z,1513230653.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:53.782Z,1513230653.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:53.859Z,1513230653.859 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0124.lzma
2017-12-14T05:50:53.887Z,1513230653.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:53.931Z,1513230653.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:54.235Z,1513230654.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:54.255Z,1513230654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:54.607Z,1513230654.607 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0124.lzma.bak
2017-12-14T05:50:54.608Z,1513230654.608 [DataOverHttps](INFO): SBD MOMSN=5437947
2017-12-14T05:50:54.648Z,1513230654.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:54.682Z,1513230654.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:55.927Z,1513230655.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:55.958Z,1513230655.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:56.101Z,1513230656.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:56.136Z,1513230656.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:59.550Z,1513230659.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:59.600Z,1513230659.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:50:59.695Z,1513230659.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:50:59.710Z,1513230659.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:00.061Z,1513230660.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:00.088Z,1513230660.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:00.471Z,1513230660.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:00.496Z,1513230660.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:00.864Z,1513230660.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:00.892Z,1513230660.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:01.270Z,1513230661.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:01.291Z,1513230661.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:04.739Z,1513230664.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:04.754Z,1513230664.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:04.830Z,1513230664.830 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0125.lzma
2017-12-14T05:51:04.866Z,1513230664.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:04.904Z,1513230664.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:05.207Z,1513230665.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:05.239Z,1513230665.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:05.583Z,1513230665.583 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0125.lzma.bak
2017-12-14T05:51:05.583Z,1513230665.583 [DataOverHttps](INFO): SBD MOMSN=5437951
2017-12-14T05:51:05.657Z,1513230665.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:05.679Z,1513230665.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:06.817Z,1513230666.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:06.832Z,1513230666.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:06.835Z,1513230666.835 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T05:51:06.835Z,1513230666.835 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T05:51:06.836Z,1513230666.836 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T05:51:06.929Z,1513230666.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:06.969Z,1513230666.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:10.337Z,1513230670.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:10.366Z,1513230670.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:10.489Z,1513230670.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:10.519Z,1513230670.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:10.826Z,1513230670.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:10.863Z,1513230670.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:11.239Z,1513230671.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:11.286Z,1513230671.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:11.618Z,1513230671.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:11.679Z,1513230671.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:12.016Z,1513230672.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:12.032Z,1513230672.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:12.412Z,1513230672.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:12.490Z,1513230672.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:12.810Z,1513230672.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:12.868Z,1513230672.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:13.229Z,1513230673.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:13.251Z,1513230673.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:13.625Z,1513230673.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:13.663Z,1513230673.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:14.027Z,1513230674.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:14.049Z,1513230674.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:14.411Z,1513230674.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:14.443Z,1513230674.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:14.816Z,1513230674.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:14.823Z,1513230674.823 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T05:51:14.843Z,1513230674.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:15.217Z,1513230675.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:15.239Z,1513230675.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:15.611Z,1513230675.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:15.657Z,1513230675.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:16.023Z,1513230676.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:16.066Z,1513230676.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:16.459Z,1513230676.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:16.485Z,1513230676.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:16.847Z,1513230676.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:16.867Z,1513230676.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:17.215Z,1513230677.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:17.250Z,1513230677.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:17.615Z,1513230677.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:17.648Z,1513230677.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:18.080Z,1513230678.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:18.095Z,1513230678.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:18.417Z,1513230678.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:18.447Z,1513230678.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:18.841Z,1513230678.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:18.856Z,1513230678.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:19.275Z,1513230679.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:19.312Z,1513230679.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:19.656Z,1513230679.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:19.672Z,1513230679.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:20.031Z,1513230680.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:20.075Z,1513230680.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:20.421Z,1513230680.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:20.447Z,1513230680.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:20.812Z,1513230680.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:20.855Z,1513230680.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:21.223Z,1513230681.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:21.229Z,1513230681.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x52931 got:0x48411
2017-12-14T05:51:21.271Z,1513230681.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:21.629Z,1513230681.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:21.704Z,1513230681.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:21.926Z,1513230681.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:22.035Z,1513230682.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:22.067Z,1513230682.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:22.434Z,1513230682.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:22.463Z,1513230682.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:22.721Z,1513230682.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:22.829Z,1513230682.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:22.844Z,1513230682.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:23.225Z,1513230683.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:23.239Z,1513230683.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:23.619Z,1513230683.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:23.651Z,1513230683.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:24.030Z,1513230684.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:24.045Z,1513230684.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:24.437Z,1513230684.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:24.452Z,1513230684.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:24.826Z,1513230684.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:24.842Z,1513230684.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:25.226Z,1513230685.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:25.271Z,1513230685.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:25.635Z,1513230685.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:25.664Z,1513230685.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:26.031Z,1513230686.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:26.052Z,1513230686.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:26.428Z,1513230686.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:26.483Z,1513230686.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:26.819Z,1513230686.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:26.852Z,1513230686.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:27.224Z,1513230687.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:27.258Z,1513230687.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:27.619Z,1513230687.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:27.634Z,1513230687.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:28.053Z,1513230688.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:28.075Z,1513230688.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:28.434Z,1513230688.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:28.462Z,1513230688.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:28.837Z,1513230688.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:28.866Z,1513230688.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:29.225Z,1513230689.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:29.272Z,1513230689.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:29.626Z,1513230689.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:29.642Z,1513230689.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:30.089Z,1513230690.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:30.171Z,1513230690.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:30.425Z,1513230690.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:30.441Z,1513230690.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:30.826Z,1513230690.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:30.849Z,1513230690.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:31.241Z,1513230691.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:31.263Z,1513230691.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:31.646Z,1513230691.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:31.667Z,1513230691.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:32.043Z,1513230692.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:32.063Z,1513230692.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:32.416Z,1513230692.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:32.490Z,1513230692.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:32.892Z,1513230692.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:32.907Z,1513230692.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:33.214Z,1513230693.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:33.251Z,1513230693.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:33.615Z,1513230693.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:33.650Z,1513230693.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:34.024Z,1513230694.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:34.055Z,1513230694.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:34.446Z,1513230694.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:34.461Z,1513230694.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:34.858Z,1513230694.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:34.887Z,1513230694.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:35.230Z,1513230695.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:35.262Z,1513230695.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:35.635Z,1513230695.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:35.786Z,1513230695.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:36.023Z,1513230696.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:36.067Z,1513230696.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:36.420Z,1513230696.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:36.459Z,1513230696.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:36.823Z,1513230696.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:36.833Z,1513230696.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x2321 got:0x46731
2017-12-14T05:51:36.856Z,1513230696.856 [BPC1](ERROR): Failed to receive battery data
2017-12-14T05:51:36.856Z,1513230696.856 [BPC1] Communications Fault, FailCount= 1
2017-12-14T05:51:36.856Z,1513230696.856 [BPC1](ERROR): Communications Fault
2017-12-14T05:51:36.880Z,1513230696.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:36.926Z,1513230696.926 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T05:51:37.259Z,1513230697.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:37.307Z,1513230697.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:37.627Z,1513230697.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:37.674Z,1513230697.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:38.024Z,1513230698.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:38.098Z,1513230698.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:38.124Z,1513230698.124 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:51:38.124Z,1513230698.124 [BPC1] No Fault, FailCount= 1
2017-12-14T05:51:38.416Z,1513230698.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:38.553Z,1513230698.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:38.824Z,1513230698.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:39.007Z,1513230699.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:39.230Z,1513230699.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:39.263Z,1513230699.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:39.640Z,1513230699.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:39.656Z,1513230699.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:40.039Z,1513230700.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:40.079Z,1513230700.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:40.442Z,1513230700.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:40.456Z,1513230700.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:40.840Z,1513230700.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:40.880Z,1513230700.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:41.210Z,1513230701.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:41.241Z,1513230701.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:41.640Z,1513230701.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:41.655Z,1513230701.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:42.041Z,1513230702.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:42.048Z,1513230702.048 [PNI_TCM](ERROR): CRC does not match. Expected:0x7237 got:0x6591
2017-12-14T05:51:42.086Z,1513230702.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:42.426Z,1513230702.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:42.447Z,1513230702.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:42.812Z,1513230702.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:42.874Z,1513230702.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:43.239Z,1513230703.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:43.286Z,1513230703.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:43.637Z,1513230703.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:43.695Z,1513230703.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:44.023Z,1513230704.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:44.051Z,1513230704.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:44.458Z,1513230704.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:44.538Z,1513230704.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:44.828Z,1513230704.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:44.863Z,1513230704.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:45.224Z,1513230705.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:45.267Z,1513230705.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:45.625Z,1513230705.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:45.667Z,1513230705.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:46.036Z,1513230706.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:46.090Z,1513230706.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:46.440Z,1513230706.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:46.455Z,1513230706.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:46.855Z,1513230706.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:46.897Z,1513230706.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:47.228Z,1513230707.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:47.256Z,1513230707.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:47.612Z,1513230707.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:47.676Z,1513230707.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:48.012Z,1513230708.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:48.071Z,1513230708.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:48.418Z,1513230708.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:48.424Z,1513230708.424 [PNI_TCM](ERROR): CRC does not match. Expected:0x19704 got:0x7233
2017-12-14T05:51:48.466Z,1513230708.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:48.819Z,1513230708.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:48.874Z,1513230708.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:49.238Z,1513230709.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:49.279Z,1513230709.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:49.648Z,1513230709.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:49.709Z,1513230709.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:49.709Z,1513230709.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2017-12-14T05:51:49.709Z,1513230709.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:51:49.711Z,1513230709.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:49.711Z,1513230709.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107
2017-12-14T05:51:49.711Z,1513230709.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:51:49.713Z,1513230709.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:49.713Z,1513230709.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2017-12-14T05:51:49.713Z,1513230709.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:51:49.733Z,1513230709.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:51:49.733Z,1513230709.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:51:49.733Z,1513230709.733 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:51:50.046Z,1513230710.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:50.104Z,1513230710.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:51:50.104Z,1513230710.104 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2017-12-14T05:51:50.104Z,1513230710.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:51:50.104Z,1513230710.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107
2017-12-14T05:51:50.129Z,1513230710.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:51:50.129Z,1513230710.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2017-12-14T05:51:50.425Z,1513230710.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:50.451Z,1513230710.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:51:50.452Z,1513230710.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:51:50.452Z,1513230710.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:51:50.453Z,1513230710.453 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:51:50.453Z,1513230710.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:51:50.453Z,1513230710.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:51:50.454Z,1513230710.454 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:51:50.454Z,1513230710.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:51:50.454Z,1513230710.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:51:50.812Z,1513230710.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:50.893Z,1513230710.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:51.246Z,1513230711.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:51.294Z,1513230711.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:51.628Z,1513230711.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:51.655Z,1513230711.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:52.034Z,1513230712.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:52.063Z,1513230712.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:52.442Z,1513230712.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:52.495Z,1513230712.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:52.838Z,1513230712.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:52.884Z,1513230712.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:53.228Z,1513230713.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:53.256Z,1513230713.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:53.620Z,1513230713.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:53.659Z,1513230713.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:54.016Z,1513230714.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:54.047Z,1513230714.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:54.413Z,1513230714.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:54.463Z,1513230714.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:54.818Z,1513230714.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:54.856Z,1513230714.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:55.224Z,1513230715.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:55.270Z,1513230715.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:55.639Z,1513230715.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:55.676Z,1513230715.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:56.047Z,1513230716.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:56.094Z,1513230716.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:56.416Z,1513230716.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:56.464Z,1513230716.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:56.818Z,1513230716.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:56.855Z,1513230716.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:57.212Z,1513230717.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:57.244Z,1513230717.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:57.614Z,1513230717.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:57.638Z,1513230717.638 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:51:57.726Z,1513230717.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:58.038Z,1513230718.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:58.059Z,1513230718.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:58.437Z,1513230718.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:58.487Z,1513230718.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:58.832Z,1513230718.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:58.855Z,1513230718.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:59.211Z,1513230719.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:59.282Z,1513230719.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:51:59.629Z,1513230719.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:51:59.643Z,1513230719.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:00.015Z,1513230720.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:00.040Z,1513230720.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:00.413Z,1513230720.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:00.476Z,1513230720.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:00.811Z,1513230720.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:00.851Z,1513230720.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:01.236Z,1513230721.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:01.252Z,1513230721.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:01.634Z,1513230721.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:01.648Z,1513230721.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:02.048Z,1513230722.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:02.087Z,1513230722.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:02.431Z,1513230722.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:02.452Z,1513230722.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:02.842Z,1513230722.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:02.856Z,1513230722.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:03.232Z,1513230723.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:03.263Z,1513230723.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:03.621Z,1513230723.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:03.651Z,1513230723.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:04.030Z,1513230724.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:04.045Z,1513230724.045 [PNI_TCM](ERROR): CRC does not match. Expected:0x33746 got:0x6977
2017-12-14T05:52:04.075Z,1513230724.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:04.440Z,1513230724.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:04.454Z,1513230724.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:04.839Z,1513230724.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:04.859Z,1513230724.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:05.273Z,1513230725.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:05.304Z,1513230725.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:05.616Z,1513230725.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:05.647Z,1513230725.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:06.023Z,1513230726.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:06.037Z,1513230726.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:06.429Z,1513230726.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:06.444Z,1513230726.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:06.821Z,1513230726.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:06.866Z,1513230726.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:07.238Z,1513230727.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:07.245Z,1513230727.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x55274 got:0x42001
2017-12-14T05:52:07.272Z,1513230727.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:10.673Z,1513230730.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:10.756Z,1513230730.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:10.870Z,1513230730.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:10.885Z,1513230730.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:11.236Z,1513230731.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:11.263Z,1513230731.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:11.645Z,1513230731.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:11.663Z,1513230731.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:12.028Z,1513230732.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:12.047Z,1513230732.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:12.426Z,1513230732.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:12.442Z,1513230732.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:12.824Z,1513230732.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:12.839Z,1513230732.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:13.244Z,1513230733.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:13.266Z,1513230733.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:13.642Z,1513230733.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:13.663Z,1513230733.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:14.041Z,1513230734.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:14.063Z,1513230734.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:14.425Z,1513230734.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:14.440Z,1513230734.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:14.831Z,1513230734.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:14.851Z,1513230734.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:15.273Z,1513230735.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:15.307Z,1513230735.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:15.631Z,1513230735.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:15.651Z,1513230735.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:16.038Z,1513230736.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:16.053Z,1513230736.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:16.470Z,1513230736.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:16.490Z,1513230736.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:16.838Z,1513230736.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:16.867Z,1513230736.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:17.228Z,1513230737.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:17.271Z,1513230737.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:17.624Z,1513230737.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:17.659Z,1513230737.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:18.026Z,1513230738.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:18.060Z,1513230738.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:18.458Z,1513230738.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:18.474Z,1513230738.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:18.831Z,1513230738.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:18.858Z,1513230738.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:19.252Z,1513230739.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:19.276Z,1513230739.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:19.657Z,1513230739.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:19.672Z,1513230739.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:20.047Z,1513230740.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:20.063Z,1513230740.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:20.433Z,1513230740.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:20.459Z,1513230740.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:20.832Z,1513230740.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:20.857Z,1513230740.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:21.246Z,1513230741.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:21.318Z,1513230741.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:21.631Z,1513230741.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:21.686Z,1513230741.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:22.042Z,1513230742.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:22.065Z,1513230742.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:22.441Z,1513230742.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:22.488Z,1513230742.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:22.841Z,1513230742.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:22.863Z,1513230742.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:23.233Z,1513230743.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:23.275Z,1513230743.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:23.631Z,1513230743.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:23.668Z,1513230743.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:24.030Z,1513230744.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:24.053Z,1513230744.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:24.430Z,1513230744.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:24.466Z,1513230744.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:24.831Z,1513230744.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:24.845Z,1513230744.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:25.245Z,1513230745.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:25.279Z,1513230745.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:25.645Z,1513230745.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:25.670Z,1513230745.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:26.082Z,1513230746.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:26.168Z,1513230746.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:26.435Z,1513230746.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:26.458Z,1513230746.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:26.842Z,1513230746.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:26.861Z,1513230746.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:27.242Z,1513230747.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:27.257Z,1513230747.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:27.623Z,1513230747.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:27.656Z,1513230747.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:28.048Z,1513230748.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:28.067Z,1513230748.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:28.451Z,1513230748.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:28.465Z,1513230748.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:28.853Z,1513230748.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:28.868Z,1513230748.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:29.246Z,1513230749.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:29.273Z,1513230749.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:29.663Z,1513230749.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:29.689Z,1513230749.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:30.033Z,1513230750.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:30.047Z,1513230750.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:30.427Z,1513230750.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:30.454Z,1513230750.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:30.822Z,1513230750.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:30.855Z,1513230750.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:31.246Z,1513230751.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:31.267Z,1513230751.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:31.647Z,1513230751.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:31.691Z,1513230751.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:32.046Z,1513230752.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:32.061Z,1513230752.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:32.424Z,1513230752.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:32.465Z,1513230752.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:32.831Z,1513230752.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:32.857Z,1513230752.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:33.260Z,1513230753.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:33.275Z,1513230753.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:33.629Z,1513230753.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:33.655Z,1513230753.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:34.075Z,1513230754.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:34.124Z,1513230754.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:34.449Z,1513230754.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:34.472Z,1513230754.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:34.852Z,1513230754.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:34.867Z,1513230754.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:35.242Z,1513230755.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:35.271Z,1513230755.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:35.637Z,1513230755.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:35.667Z,1513230755.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:36.030Z,1513230756.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:36.068Z,1513230756.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:36.438Z,1513230756.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:36.459Z,1513230756.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:36.831Z,1513230756.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:36.864Z,1513230756.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:37.254Z,1513230757.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:37.294Z,1513230757.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:37.656Z,1513230757.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:37.685Z,1513230757.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:38.046Z,1513230758.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:38.075Z,1513230758.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:38.435Z,1513230758.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:38.469Z,1513230758.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:38.837Z,1513230758.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:38.871Z,1513230758.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:39.236Z,1513230759.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:39.266Z,1513230759.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:39.637Z,1513230759.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:39.652Z,1513230759.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:40.045Z,1513230760.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:40.075Z,1513230760.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:40.455Z,1513230760.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:40.487Z,1513230760.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:40.854Z,1513230760.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:40.879Z,1513230760.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:41.233Z,1513230761.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:41.269Z,1513230761.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:41.638Z,1513230761.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:41.653Z,1513230761.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:42.041Z,1513230762.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:42.056Z,1513230762.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:42.447Z,1513230762.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:42.518Z,1513230762.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:42.838Z,1513230762.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:42.853Z,1513230762.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:43.245Z,1513230763.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:43.291Z,1513230763.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:43.649Z,1513230763.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:43.664Z,1513230763.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:44.037Z,1513230764.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:44.091Z,1513230764.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:44.427Z,1513230764.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:44.442Z,1513230764.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:44.838Z,1513230764.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:44.867Z,1513230764.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:45.237Z,1513230765.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:45.267Z,1513230765.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:45.636Z,1513230765.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:45.650Z,1513230765.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:46.050Z,1513230766.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:46.072Z,1513230766.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:46.448Z,1513230766.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:46.477Z,1513230766.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:46.867Z,1513230766.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:46.887Z,1513230766.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:47.234Z,1513230767.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:47.254Z,1513230767.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:47.639Z,1513230767.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:47.658Z,1513230767.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:48.033Z,1513230768.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:48.048Z,1513230768.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:48.436Z,1513230768.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:48.452Z,1513230768.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:48.840Z,1513230768.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:48.854Z,1513230768.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:49.244Z,1513230769.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:49.259Z,1513230769.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:49.644Z,1513230769.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:49.659Z,1513230769.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:50.054Z,1513230770.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:50.068Z,1513230770.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:50.438Z,1513230770.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:50.452Z,1513230770.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:50.836Z,1513230770.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:50.856Z,1513230770.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:51.241Z,1513230771.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:51.255Z,1513230771.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:51.623Z,1513230771.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:51.660Z,1513230771.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:52.048Z,1513230772.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:52.062Z,1513230772.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:52.454Z,1513230772.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:52.503Z,1513230772.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:52.848Z,1513230772.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:52.863Z,1513230772.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:53.223Z,1513230773.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:53.293Z,1513230773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:53.643Z,1513230773.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:53.675Z,1513230773.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:54.037Z,1513230774.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:54.060Z,1513230774.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:54.437Z,1513230774.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:54.451Z,1513230774.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:54.839Z,1513230774.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:54.876Z,1513230774.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:55.240Z,1513230775.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:55.263Z,1513230775.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:55.642Z,1513230775.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:55.657Z,1513230775.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:56.040Z,1513230776.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:56.059Z,1513230776.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:56.445Z,1513230776.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:56.489Z,1513230776.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:56.828Z,1513230776.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:56.855Z,1513230776.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:57.228Z,1513230777.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:57.257Z,1513230777.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:57.624Z,1513230777.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:57.649Z,1513230777.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:58.046Z,1513230778.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:58.060Z,1513230778.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:58.452Z,1513230778.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:58.467Z,1513230778.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:58.847Z,1513230778.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:58.862Z,1513230778.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:59.240Z,1513230779.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:59.255Z,1513230779.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:52:59.623Z,1513230779.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:52:59.665Z,1513230779.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:00.027Z,1513230780.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:00.052Z,1513230780.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:00.428Z,1513230780.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:00.453Z,1513230780.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:00.824Z,1513230780.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:00.850Z,1513230780.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:01.248Z,1513230781.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:01.269Z,1513230781.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:01.650Z,1513230781.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:01.671Z,1513230781.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:02.049Z,1513230782.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:02.071Z,1513230782.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:02.425Z,1513230782.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:02.461Z,1513230782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:02.859Z,1513230782.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:02.913Z,1513230782.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:03.242Z,1513230783.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:03.319Z,1513230783.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:03.638Z,1513230783.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:03.653Z,1513230783.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:04.045Z,1513230784.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:04.099Z,1513230784.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:04.444Z,1513230784.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:04.458Z,1513230784.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:04.838Z,1513230784.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:04.883Z,1513230784.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:05.230Z,1513230785.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:05.255Z,1513230785.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:05.636Z,1513230785.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:05.650Z,1513230785.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:06.039Z,1513230786.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:06.059Z,1513230786.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:06.428Z,1513230786.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:06.463Z,1513230786.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:06.828Z,1513230786.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:06.854Z,1513230786.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:07.249Z,1513230787.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:07.271Z,1513230787.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:10.722Z,1513230790.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:10.746Z,1513230790.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:10.858Z,1513230790.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:10.873Z,1513230790.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:11.210Z,1513230791.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:11.246Z,1513230791.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:11.605Z,1513230791.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:11.627Z,1513230791.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:12.011Z,1513230792.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:12.031Z,1513230792.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:12.454Z,1513230792.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:12.510Z,1513230792.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:12.804Z,1513230792.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:12.830Z,1513230792.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:13.215Z,1513230793.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:13.270Z,1513230793.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:13.616Z,1513230793.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:13.632Z,1513230793.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:14.014Z,1513230794.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:14.051Z,1513230794.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:14.404Z,1513230794.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:14.429Z,1513230794.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:14.810Z,1513230794.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:14.835Z,1513230794.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:15.218Z,1513230795.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:15.252Z,1513230795.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:15.635Z,1513230795.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:15.671Z,1513230795.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:16.023Z,1513230796.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:16.041Z,1513230796.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:16.425Z,1513230796.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:16.439Z,1513230796.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:16.825Z,1513230796.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:16.839Z,1513230796.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:17.216Z,1513230797.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:17.251Z,1513230797.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:17.598Z,1513230797.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:17.613Z,1513230797.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:18.020Z,1513230798.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:18.035Z,1513230798.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:18.416Z,1513230798.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:18.431Z,1513230798.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:18.838Z,1513230798.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:18.886Z,1513230798.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:19.206Z,1513230799.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:19.239Z,1513230799.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:19.623Z,1513230799.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:19.651Z,1513230799.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:20.009Z,1513230800.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:20.031Z,1513230800.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:20.402Z,1513230800.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:20.441Z,1513230800.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:20.802Z,1513230800.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:20.841Z,1513230800.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:21.202Z,1513230801.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:21.234Z,1513230801.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:21.607Z,1513230801.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:21.631Z,1513230801.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:22.013Z,1513230802.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:22.058Z,1513230802.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:22.410Z,1513230802.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:22.445Z,1513230802.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:22.829Z,1513230802.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:22.843Z,1513230802.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x27119 got:0x46682
2017-12-14T05:53:22.871Z,1513230802.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:23.199Z,1513230803.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:23.227Z,1513230803.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:23.603Z,1513230803.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:23.686Z,1513230803.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:24.007Z,1513230804.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:24.029Z,1513230804.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:24.412Z,1513230804.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:24.430Z,1513230804.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:24.807Z,1513230804.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:24.855Z,1513230804.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:25.257Z,1513230805.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:25.272Z,1513230805.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:25.620Z,1513230805.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:25.675Z,1513230805.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:26.024Z,1513230806.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:26.058Z,1513230806.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:26.410Z,1513230806.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:26.433Z,1513230806.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:26.795Z,1513230806.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:26.841Z,1513230806.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:27.208Z,1513230807.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:27.230Z,1513230807.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:27.611Z,1513230807.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:27.631Z,1513230807.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:28.024Z,1513230808.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:28.039Z,1513230808.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:28.424Z,1513230808.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:28.494Z,1513230808.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:28.811Z,1513230808.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:28.862Z,1513230808.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:29.225Z,1513230809.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:29.232Z,1513230809.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x1428 got:0x16897
2017-12-14T05:53:29.270Z,1513230809.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:29.614Z,1513230809.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:29.629Z,1513230809.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:30.015Z,1513230810.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:30.047Z,1513230810.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:30.425Z,1513230810.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:30.441Z,1513230810.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:30.825Z,1513230810.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:30.840Z,1513230810.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:31.218Z,1513230811.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:31.241Z,1513230811.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:31.602Z,1513230811.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:31.654Z,1513230811.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:31.995Z,1513230811.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:32.010Z,1513230812.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:32.395Z,1513230812.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:32.438Z,1513230812.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:32.806Z,1513230812.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:32.840Z,1513230812.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:33.209Z,1513230813.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:33.250Z,1513230813.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:33.610Z,1513230813.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:33.650Z,1513230813.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:34.020Z,1513230814.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:34.086Z,1513230814.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:34.407Z,1513230814.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:34.441Z,1513230814.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:34.850Z,1513230814.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:34.891Z,1513230814.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:35.202Z,1513230815.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:35.243Z,1513230815.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:35.603Z,1513230815.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:35.642Z,1513230815.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:36.008Z,1513230816.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:36.039Z,1513230816.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:36.418Z,1513230816.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:36.454Z,1513230816.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:36.805Z,1513230816.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:36.842Z,1513230816.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:37.200Z,1513230817.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:37.234Z,1513230817.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:37.610Z,1513230817.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:37.641Z,1513230817.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:38.049Z,1513230818.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:38.064Z,1513230818.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:38.398Z,1513230818.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:38.444Z,1513230818.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:38.804Z,1513230818.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:38.828Z,1513230818.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:39.222Z,1513230819.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:39.258Z,1513230819.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:39.617Z,1513230819.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:39.656Z,1513230819.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:40.021Z,1513230820.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:40.050Z,1513230820.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:40.406Z,1513230820.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:40.427Z,1513230820.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:40.807Z,1513230820.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:40.822Z,1513230820.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:41.220Z,1513230821.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:41.277Z,1513230821.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:41.594Z,1513230821.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:41.630Z,1513230821.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:42.024Z,1513230822.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:42.040Z,1513230822.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:42.426Z,1513230822.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:42.440Z,1513230822.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:42.819Z,1513230822.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:42.844Z,1513230822.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:43.195Z,1513230823.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:43.239Z,1513230823.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:43.598Z,1513230823.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:43.645Z,1513230823.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:44.014Z,1513230824.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:44.028Z,1513230824.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:44.423Z,1513230824.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:44.473Z,1513230824.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:44.816Z,1513230824.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:44.906Z,1513230824.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:45.207Z,1513230825.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:45.241Z,1513230825.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:45.629Z,1513230825.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:45.682Z,1513230825.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:46.014Z,1513230826.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:46.047Z,1513230826.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:46.402Z,1513230826.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:46.442Z,1513230826.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:46.802Z,1513230826.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:46.840Z,1513230826.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:47.207Z,1513230827.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:47.241Z,1513230827.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:47.640Z,1513230827.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:47.667Z,1513230827.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:48.006Z,1513230828.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:48.046Z,1513230828.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:48.423Z,1513230828.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:48.453Z,1513230828.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:48.811Z,1513230828.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:48.817Z,1513230828.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x62490 got:0x36830
2017-12-14T05:53:48.848Z,1513230828.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:49.203Z,1513230829.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:49.247Z,1513230829.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:49.605Z,1513230829.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:49.627Z,1513230829.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:50.012Z,1513230830.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:50.029Z,1513230830.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:50.410Z,1513230830.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:50.428Z,1513230830.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:50.836Z,1513230830.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:50.876Z,1513230830.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:51.214Z,1513230831.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:51.235Z,1513230831.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:51.619Z,1513230831.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:51.639Z,1513230831.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:52.023Z,1513230832.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:52.051Z,1513230832.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:52.407Z,1513230832.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:52.438Z,1513230832.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:52.795Z,1513230832.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:52.826Z,1513230832.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:53.195Z,1513230833.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:53.231Z,1513230833.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:53.609Z,1513230833.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:53.633Z,1513230833.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:54.018Z,1513230834.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:54.066Z,1513230834.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:54.422Z,1513230834.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:54.439Z,1513230834.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:54.820Z,1513230834.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:54.873Z,1513230834.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:55.195Z,1513230835.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:55.234Z,1513230835.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:55.599Z,1513230835.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:55.643Z,1513230835.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:55.999Z,1513230835.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:56.031Z,1513230836.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:56.401Z,1513230836.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:56.440Z,1513230836.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:56.801Z,1513230836.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:56.832Z,1513230836.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:57.205Z,1513230837.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:57.279Z,1513230837.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:57.610Z,1513230837.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:57.651Z,1513230837.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:58.013Z,1513230838.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:58.022Z,1513230838.022 [PNI_TCM](ERROR): CRC does not match. Expected:0x65356 got:0x6336
2017-12-14T05:53:58.058Z,1513230838.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:58.413Z,1513230838.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:58.427Z,1513230838.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:58.809Z,1513230838.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:58.847Z,1513230838.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:59.203Z,1513230839.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:59.226Z,1513230839.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:53:59.609Z,1513230839.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:53:59.686Z,1513230839.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:00.024Z,1513230840.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:00.039Z,1513230840.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:00.423Z,1513230840.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:00.517Z,1513230840.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:00.814Z,1513230840.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:00.843Z,1513230840.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:01.216Z,1513230841.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:01.263Z,1513230841.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:01.607Z,1513230841.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:01.639Z,1513230841.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:02.019Z,1513230842.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:02.043Z,1513230842.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:02.425Z,1513230842.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:02.432Z,1513230842.432 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:54:02.469Z,1513230842.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:02.821Z,1513230842.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:02.836Z,1513230842.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:03.198Z,1513230843.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:03.235Z,1513230843.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:03.596Z,1513230843.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:03.641Z,1513230843.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:04.017Z,1513230844.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:04.038Z,1513230844.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:04.426Z,1513230844.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:04.440Z,1513230844.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:04.818Z,1513230844.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:04.834Z,1513230844.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:05.195Z,1513230845.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:05.232Z,1513230845.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:05.595Z,1513230845.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:05.633Z,1513230845.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:06.015Z,1513230846.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:06.066Z,1513230846.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:06.427Z,1513230846.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:06.442Z,1513230846.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:06.837Z,1513230846.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:06.868Z,1513230846.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:07.207Z,1513230847.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:07.250Z,1513230847.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:07.604Z,1513230847.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:07.625Z,1513230847.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:11.089Z,1513230851.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:11.152Z,1513230851.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:11.232Z,1513230851.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:11.263Z,1513230851.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:11.614Z,1513230851.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:11.653Z,1513230851.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:12.020Z,1513230852.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:12.038Z,1513230852.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:12.423Z,1513230852.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:12.443Z,1513230852.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:12.816Z,1513230852.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:12.836Z,1513230852.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:13.209Z,1513230853.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:13.264Z,1513230853.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:13.598Z,1513230853.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:13.631Z,1513230853.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:14.027Z,1513230854.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:14.047Z,1513230854.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:14.424Z,1513230854.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:14.439Z,1513230854.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:14.819Z,1513230854.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:14.851Z,1513230854.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:15.199Z,1513230855.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:15.232Z,1513230855.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:15.617Z,1513230855.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:15.632Z,1513230855.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:16.015Z,1513230856.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:16.035Z,1513230856.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:16.435Z,1513230856.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:16.466Z,1513230856.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:16.809Z,1513230856.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:16.841Z,1513230856.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:17.229Z,1513230857.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:17.235Z,1513230857.235 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T05:54:17.278Z,1513230857.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:17.624Z,1513230857.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:17.643Z,1513230857.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:17.999Z,1513230857.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:18.053Z,1513230858.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:18.403Z,1513230858.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:18.442Z,1513230858.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:18.799Z,1513230858.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:18.851Z,1513230858.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:19.207Z,1513230859.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:19.239Z,1513230859.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:19.645Z,1513230859.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:19.679Z,1513230859.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:20.030Z,1513230860.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:20.049Z,1513230860.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:20.413Z,1513230860.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:20.443Z,1513230860.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:20.805Z,1513230860.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:20.836Z,1513230860.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:21.206Z,1513230861.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:21.245Z,1513230861.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:21.620Z,1513230861.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:21.655Z,1513230861.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:22.029Z,1513230862.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:22.044Z,1513230862.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:22.420Z,1513230862.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:22.443Z,1513230862.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:22.808Z,1513230862.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:22.871Z,1513230862.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:23.215Z,1513230863.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:23.306Z,1513230863.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:23.626Z,1513230863.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:23.654Z,1513230863.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:24.018Z,1513230864.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:24.055Z,1513230864.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:24.422Z,1513230864.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:24.455Z,1513230864.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:24.808Z,1513230864.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:24.867Z,1513230864.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:25.211Z,1513230865.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:25.220Z,1513230865.220 [PNI_TCM](ERROR): CRC does not match. Expected:0x62570 got:0x6336
2017-12-14T05:54:25.252Z,1513230865.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:25.623Z,1513230865.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:25.657Z,1513230865.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:26.035Z,1513230866.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:26.060Z,1513230866.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:26.422Z,1513230866.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:26.438Z,1513230866.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:26.817Z,1513230866.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:26.833Z,1513230866.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:27.226Z,1513230867.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:27.240Z,1513230867.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:27.613Z,1513230867.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:27.641Z,1513230867.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:28.020Z,1513230868.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:28.044Z,1513230868.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:28.426Z,1513230868.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:28.442Z,1513230868.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:28.814Z,1513230868.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:28.839Z,1513230868.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:29.224Z,1513230869.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:29.262Z,1513230869.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:29.619Z,1513230869.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:29.638Z,1513230869.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:30.028Z,1513230870.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:30.042Z,1513230870.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:30.417Z,1513230870.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:30.450Z,1513230870.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:30.799Z,1513230870.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:30.843Z,1513230870.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:31.213Z,1513230871.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:31.234Z,1513230871.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:31.630Z,1513230871.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:31.644Z,1513230871.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:32.030Z,1513230872.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:32.072Z,1513230872.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:32.431Z,1513230872.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:32.481Z,1513230872.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:32.800Z,1513230872.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:32.848Z,1513230872.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:33.211Z,1513230873.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:33.229Z,1513230873.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x16065 got:0x49060
2017-12-14T05:54:33.283Z,1513230873.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:33.626Z,1513230873.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:33.643Z,1513230873.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:34.026Z,1513230874.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:34.047Z,1513230874.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:34.426Z,1513230874.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:34.441Z,1513230874.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:34.799Z,1513230874.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:34.832Z,1513230874.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:35.214Z,1513230875.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:35.220Z,1513230875.220 [PNI_TCM](ERROR): CRC does not match. Expected:0x60750 got:0x6336
2017-12-14T05:54:35.248Z,1513230875.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:35.624Z,1513230875.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:35.676Z,1513230875.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:36.021Z,1513230876.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:36.038Z,1513230876.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:36.427Z,1513230876.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:36.454Z,1513230876.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:36.803Z,1513230876.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:36.831Z,1513230876.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:37.198Z,1513230877.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:37.240Z,1513230877.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:37.603Z,1513230877.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:37.635Z,1513230877.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:37.999Z,1513230877.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:38.037Z,1513230878.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:38.407Z,1513230878.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:38.434Z,1513230878.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:38.844Z,1513230878.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:38.884Z,1513230878.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:39.225Z,1513230879.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:39.240Z,1513230879.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:39.623Z,1513230879.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:39.638Z,1513230879.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:40.010Z,1513230880.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:40.033Z,1513230880.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:40.411Z,1513230880.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:40.443Z,1513230880.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:40.811Z,1513230880.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:40.833Z,1513230880.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:41.224Z,1513230881.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:41.240Z,1513230881.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:41.627Z,1513230881.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:41.642Z,1513230881.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:42.031Z,1513230882.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:42.055Z,1513230882.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:42.423Z,1513230882.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:42.439Z,1513230882.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:42.799Z,1513230882.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:42.839Z,1513230882.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:43.219Z,1513230883.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:43.239Z,1513230883.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:43.604Z,1513230883.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:43.647Z,1513230883.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:44.003Z,1513230884.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:44.039Z,1513230884.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:44.402Z,1513230884.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:44.437Z,1513230884.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:44.830Z,1513230884.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:44.852Z,1513230884.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:45.255Z,1513230885.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:45.343Z,1513230885.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:45.636Z,1513230885.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:45.659Z,1513230885.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:46.006Z,1513230886.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:46.038Z,1513230886.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:46.412Z,1513230886.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:46.468Z,1513230886.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:46.806Z,1513230886.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:46.838Z,1513230886.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:47.206Z,1513230887.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:47.258Z,1513230887.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:47.629Z,1513230887.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:47.651Z,1513230887.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:48.019Z,1513230888.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:48.042Z,1513230888.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:48.415Z,1513230888.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:48.451Z,1513230888.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:48.802Z,1513230888.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:48.847Z,1513230888.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:49.208Z,1513230889.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:49.237Z,1513230889.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:49.611Z,1513230889.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:49.640Z,1513230889.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.007Z,1513230890.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:50.043Z,1513230890.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.407Z,1513230890.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:50.446Z,1513230890.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.828Z,1513230890.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:50.843Z,1513230890.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.844Z,1513230890.844 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2017-12-14T05:54:50.844Z,1513230890.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:54:50.846Z,1513230890.846 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.846Z,1513230890.846 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108
2017-12-14T05:54:50.846Z,1513230890.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:54:50.848Z,1513230890.848 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:50.848Z,1513230890.848 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2017-12-14T05:54:50.848Z,1513230890.848 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:54:50.860Z,1513230890.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:54:50.860Z,1513230890.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:54:50.860Z,1513230890.860 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:54:51.228Z,1513230891.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:51.254Z,1513230891.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:54:51.254Z,1513230891.254 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2017-12-14T05:54:51.254Z,1513230891.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:54:51.254Z,1513230891.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108
2017-12-14T05:54:51.255Z,1513230891.255 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:54:51.255Z,1513230891.255 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2017-12-14T05:54:51.617Z,1513230891.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:51.651Z,1513230891.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:54:51.651Z,1513230891.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:54:51.652Z,1513230891.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:54:51.652Z,1513230891.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:54:51.652Z,1513230891.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:54:51.653Z,1513230891.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:54:51.653Z,1513230891.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:54:51.653Z,1513230891.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:54:51.654Z,1513230891.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:54:52.008Z,1513230892.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:52.030Z,1513230892.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:52.416Z,1513230892.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:52.430Z,1513230892.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:52.820Z,1513230892.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:52.835Z,1513230892.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:53.206Z,1513230893.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:53.240Z,1513230893.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:53.618Z,1513230893.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:53.638Z,1513230893.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:54.023Z,1513230894.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:54.037Z,1513230894.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:54.424Z,1513230894.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:54.439Z,1513230894.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:54.808Z,1513230894.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:54.838Z,1513230894.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:55.204Z,1513230895.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:55.239Z,1513230895.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:55.603Z,1513230895.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:55.673Z,1513230895.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:56.006Z,1513230896.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:56.033Z,1513230896.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:56.399Z,1513230896.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:56.439Z,1513230896.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:56.829Z,1513230896.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:56.844Z,1513230896.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:57.220Z,1513230897.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:57.244Z,1513230897.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:57.618Z,1513230897.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:57.642Z,1513230897.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:58.002Z,1513230898.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:58.050Z,1513230898.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:58.417Z,1513230898.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:58.446Z,1513230898.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:58.815Z,1513230898.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:58.853Z,1513230898.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:59.210Z,1513230899.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:59.225Z,1513230899.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:54:59.621Z,1513230899.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:54:59.649Z,1513230899.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:00.027Z,1513230900.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:00.049Z,1513230900.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:00.408Z,1513230900.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:00.429Z,1513230900.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:00.811Z,1513230900.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:00.831Z,1513230900.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:01.232Z,1513230901.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:01.278Z,1513230901.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:01.608Z,1513230901.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:01.643Z,1513230901.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:02.019Z,1513230902.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:02.026Z,1513230902.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:55:02.043Z,1513230902.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:02.412Z,1513230902.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:02.437Z,1513230902.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:02.817Z,1513230902.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:02.904Z,1513230902.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:03.225Z,1513230903.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:03.241Z,1513230903.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:03.625Z,1513230903.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:03.640Z,1513230903.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:04.020Z,1513230904.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:04.035Z,1513230904.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:04.422Z,1513230904.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:04.470Z,1513230904.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:04.834Z,1513230904.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:04.865Z,1513230904.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:05.199Z,1513230905.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:05.239Z,1513230905.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:05.625Z,1513230905.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:05.647Z,1513230905.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:06.029Z,1513230906.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:06.048Z,1513230906.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:06.414Z,1513230906.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:06.445Z,1513230906.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:06.799Z,1513230906.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:06.838Z,1513230906.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:07.230Z,1513230907.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:07.237Z,1513230907.237 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T05:55:07.315Z,1513230907.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:07.642Z,1513230907.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:07.671Z,1513230907.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:11.103Z,1513230911.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:11.163Z,1513230911.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:11.259Z,1513230911.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:11.299Z,1513230911.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:11.653Z,1513230911.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:11.704Z,1513230911.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:12.054Z,1513230912.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:12.075Z,1513230912.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:12.447Z,1513230912.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:12.470Z,1513230912.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:12.834Z,1513230912.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:12.871Z,1513230912.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:13.248Z,1513230913.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:13.262Z,1513230913.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:13.631Z,1513230913.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:13.655Z,1513230913.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:14.081Z,1513230914.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:14.119Z,1513230914.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:14.435Z,1513230914.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:14.470Z,1513230914.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:14.845Z,1513230914.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:14.876Z,1513230914.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:15.266Z,1513230915.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:15.287Z,1513230915.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:15.648Z,1513230915.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:15.675Z,1513230915.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:16.036Z,1513230916.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:16.066Z,1513230916.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:16.438Z,1513230916.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:16.477Z,1513230916.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:16.841Z,1513230916.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:16.876Z,1513230916.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:17.267Z,1513230917.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:17.290Z,1513230917.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:17.667Z,1513230917.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:17.682Z,1513230917.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:18.053Z,1513230918.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:18.080Z,1513230918.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:18.454Z,1513230918.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:18.479Z,1513230918.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:18.843Z,1513230918.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:18.858Z,1513230918.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:19.238Z,1513230919.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:19.252Z,1513230919.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:19.639Z,1513230919.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:19.659Z,1513230919.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:20.038Z,1513230920.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:20.083Z,1513230920.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:20.458Z,1513230920.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:20.489Z,1513230920.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:20.844Z,1513230920.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:20.879Z,1513230920.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:21.262Z,1513230921.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:21.285Z,1513230921.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:21.645Z,1513230921.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:21.660Z,1513230921.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:22.043Z,1513230922.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:22.063Z,1513230922.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:22.445Z,1513230922.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:22.460Z,1513230922.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:22.846Z,1513230922.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:22.862Z,1513230922.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:23.239Z,1513230923.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:23.254Z,1513230923.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:23.653Z,1513230923.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:23.694Z,1513230923.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:24.053Z,1513230924.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:24.068Z,1513230924.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:24.454Z,1513230924.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:24.470Z,1513230924.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:24.831Z,1513230924.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:24.863Z,1513230924.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:25.236Z,1513230925.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:25.267Z,1513230925.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:25.635Z,1513230925.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:25.667Z,1513230925.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:26.033Z,1513230926.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:26.063Z,1513230926.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:26.427Z,1513230926.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:26.454Z,1513230926.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:26.867Z,1513230926.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:26.891Z,1513230926.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:27.269Z,1513230927.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:27.284Z,1513230927.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:27.654Z,1513230927.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:27.679Z,1513230927.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:28.039Z,1513230928.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:28.065Z,1513230928.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:28.434Z,1513230928.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:28.465Z,1513230928.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:28.838Z,1513230928.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:28.871Z,1513230928.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:29.232Z,1513230929.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:29.247Z,1513230929.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:29.649Z,1513230929.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:29.683Z,1513230929.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:30.075Z,1513230930.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:30.099Z,1513230930.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:30.466Z,1513230930.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:30.480Z,1513230930.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:30.842Z,1513230930.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:30.869Z,1513230930.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:31.235Z,1513230931.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:31.249Z,1513230931.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:31.643Z,1513230931.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:31.677Z,1513230931.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:32.048Z,1513230932.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:32.099Z,1513230932.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:32.439Z,1513230932.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:32.484Z,1513230932.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:32.854Z,1513230932.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:32.876Z,1513230932.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:33.259Z,1513230933.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:33.331Z,1513230933.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:33.657Z,1513230933.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:33.684Z,1513230933.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:34.041Z,1513230934.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:34.087Z,1513230934.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:34.442Z,1513230934.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:34.456Z,1513230934.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:34.841Z,1513230934.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:34.855Z,1513230934.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:35.246Z,1513230935.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:35.278Z,1513230935.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:35.653Z,1513230935.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:35.684Z,1513230935.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:36.049Z,1513230936.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:36.063Z,1513230936.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:36.463Z,1513230936.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:36.494Z,1513230936.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:36.846Z,1513230936.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:36.860Z,1513230936.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:37.239Z,1513230937.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:37.263Z,1513230937.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:37.642Z,1513230937.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:37.660Z,1513230937.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:38.045Z,1513230938.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:38.060Z,1513230938.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:38.441Z,1513230938.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:38.456Z,1513230938.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:38.846Z,1513230938.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:38.860Z,1513230938.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:39.257Z,1513230939.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:39.272Z,1513230939.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:39.681Z,1513230939.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:39.744Z,1513230939.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:40.043Z,1513230940.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:40.066Z,1513230940.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:40.445Z,1513230940.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:40.460Z,1513230940.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:40.845Z,1513230940.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:40.859Z,1513230940.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:41.242Z,1513230941.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:41.260Z,1513230941.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:41.657Z,1513230941.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:41.672Z,1513230941.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:42.077Z,1513230942.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:42.124Z,1513230942.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:42.454Z,1513230942.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:42.469Z,1513230942.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:42.848Z,1513230942.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:42.898Z,1513230942.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:43.250Z,1513230943.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:43.271Z,1513230943.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:43.632Z,1513230943.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:43.660Z,1513230943.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:44.050Z,1513230944.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:44.064Z,1513230944.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:44.433Z,1513230944.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:44.468Z,1513230944.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:44.854Z,1513230944.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:44.869Z,1513230944.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:45.256Z,1513230945.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:45.280Z,1513230945.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:45.654Z,1513230945.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:45.669Z,1513230945.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:46.051Z,1513230946.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:46.075Z,1513230946.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:46.437Z,1513230946.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:46.475Z,1513230946.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:46.832Z,1513230946.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:46.867Z,1513230946.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:47.235Z,1513230947.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:47.267Z,1513230947.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:47.652Z,1513230947.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:47.667Z,1513230947.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:48.054Z,1513230948.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:48.068Z,1513230948.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:48.458Z,1513230948.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:48.472Z,1513230948.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:48.835Z,1513230948.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:48.861Z,1513230948.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:49.279Z,1513230949.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:49.327Z,1513230949.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:49.635Z,1513230949.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:49.660Z,1513230949.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:50.047Z,1513230950.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:50.062Z,1513230950.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:50.447Z,1513230950.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:50.467Z,1513230950.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:50.856Z,1513230950.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:50.871Z,1513230950.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:51.255Z,1513230951.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:51.270Z,1513230951.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:51.649Z,1513230951.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:51.680Z,1513230951.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:52.032Z,1513230952.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:52.069Z,1513230952.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:52.463Z,1513230952.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:52.491Z,1513230952.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:52.837Z,1513230952.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:52.871Z,1513230952.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:53.240Z,1513230953.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:53.266Z,1513230953.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:53.659Z,1513230953.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:53.679Z,1513230953.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:54.061Z,1513230954.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:54.154Z,1513230954.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:54.457Z,1513230954.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:54.473Z,1513230954.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:54.843Z,1513230954.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:54.906Z,1513230954.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:55.229Z,1513230955.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:55.267Z,1513230955.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:55.640Z,1513230955.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:55.737Z,1513230955.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:56.038Z,1513230956.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:56.065Z,1513230956.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:56.432Z,1513230956.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:56.468Z,1513230956.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:56.841Z,1513230956.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:56.872Z,1513230956.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:57.250Z,1513230957.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:57.280Z,1513230957.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:57.656Z,1513230957.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:57.675Z,1513230957.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:58.033Z,1513230958.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:58.056Z,1513230958.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:58.437Z,1513230958.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:58.469Z,1513230958.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:58.836Z,1513230958.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:58.919Z,1513230958.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:59.238Z,1513230959.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:59.265Z,1513230959.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:55:59.658Z,1513230959.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:55:59.690Z,1513230959.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:00.050Z,1513230960.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:00.064Z,1513230960.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:00.446Z,1513230960.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:00.475Z,1513230960.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:00.844Z,1513230960.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:00.861Z,1513230960.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:01.242Z,1513230961.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:01.256Z,1513230961.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:01.638Z,1513230961.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:01.653Z,1513230961.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:02.054Z,1513230962.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:02.090Z,1513230962.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:02.446Z,1513230962.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:02.461Z,1513230962.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:02.853Z,1513230962.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:02.876Z,1513230962.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:03.254Z,1513230963.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:03.269Z,1513230963.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:03.657Z,1513230963.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:03.671Z,1513230963.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:04.032Z,1513230964.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:04.089Z,1513230964.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:04.447Z,1513230964.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:04.467Z,1513230964.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:04.846Z,1513230964.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:04.861Z,1513230964.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:05.256Z,1513230965.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:05.286Z,1513230965.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:05.658Z,1513230965.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:05.683Z,1513230965.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:06.049Z,1513230966.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:06.063Z,1513230966.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:06.442Z,1513230966.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:06.456Z,1513230966.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:06.846Z,1513230966.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:06.861Z,1513230966.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:07.244Z,1513230967.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:07.260Z,1513230967.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:07.263Z,1513230967.263 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T05:56:07.263Z,1513230967.263 [Default:CheckIn:C.Wait] Stopped
2017-12-14T05:56:07.263Z,1513230967.263 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T05:56:07.263Z,1513230967.263 [Default:CheckIn:D] Running Loop=1
2017-12-14T05:56:07.644Z,1513230967.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:07.668Z,1513230967.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:07.671Z,1513230967.671 [Default:CheckIn:D] Stopped
2017-12-14T05:56:07.671Z,1513230967.671 [Default:CheckIn:E] Running Loop=1
2017-12-14T05:56:11.117Z,1513230971.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:11.150Z,1513230971.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:11.154Z,1513230971.154 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 322.871354 min 
2017-12-14T05:56:11.154Z,1513230971.154 [Default:CheckIn:E] Stopped
2017-12-14T05:56:11.154Z,1513230971.154 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T05:56:11.154Z,1513230971.154 [Default:CheckIn] Stopped
2017-12-14T05:56:11.155Z,1513230971.155 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T05:56:11.155Z,1513230971.155 [Default:CheckIn](INFO): Running loop #32
2017-12-14T05:56:11.155Z,1513230971.155 [Default:CheckIn] Running Loop=32
2017-12-14T05:56:11.155Z,1513230971.155 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T05:56:11.155Z,1513230971.155 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T05:56:11.265Z,1513230971.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:11.288Z,1513230971.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:11.622Z,1513230971.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:11.653Z,1513230971.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:12.031Z,1513230972.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:12.060Z,1513230972.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:12.417Z,1513230972.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:12.432Z,1513230972.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:12.812Z,1513230972.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:12.828Z,1513230972.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:13.220Z,1513230973.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:13.259Z,1513230973.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:13.603Z,1513230973.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:13.636Z,1513230973.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:14.018Z,1513230974.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:14.026Z,1513230974.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x17207 got:0x6591
2017-12-14T05:56:14.065Z,1513230974.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:14.411Z,1513230974.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:14.430Z,1513230974.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:14.835Z,1513230974.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:14.871Z,1513230974.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:15.236Z,1513230975.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:15.266Z,1513230975.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:15.630Z,1513230975.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:15.644Z,1513230975.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:16.010Z,1513230976.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:16.063Z,1513230976.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:16.403Z,1513230976.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:16.486Z,1513230976.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:16.803Z,1513230976.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:16.836Z,1513230976.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:17.199Z,1513230977.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:17.243Z,1513230977.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:17.622Z,1513230977.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:17.695Z,1513230977.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:18.106Z,1513230978.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:18.155Z,1513230978.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:18.412Z,1513230978.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:18.470Z,1513230978.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:18.815Z,1513230978.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:18.830Z,1513230978.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:19.230Z,1513230979.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:19.273Z,1513230979.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:19.602Z,1513230979.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:19.645Z,1513230979.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:20.003Z,1513230980.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:20.054Z,1513230980.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:20.400Z,1513230980.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:20.456Z,1513230980.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:20.815Z,1513230980.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:20.856Z,1513230980.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:21.241Z,1513230981.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:21.291Z,1513230981.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:21.635Z,1513230981.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:21.691Z,1513230981.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:22.013Z,1513230982.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:22.050Z,1513230982.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:22.417Z,1513230982.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:22.440Z,1513230982.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:22.826Z,1513230982.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:22.868Z,1513230982.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:23.231Z,1513230983.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:23.275Z,1513230983.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:23.626Z,1513230983.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:23.671Z,1513230983.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:24.027Z,1513230984.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:24.076Z,1513230984.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:24.421Z,1513230984.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:24.446Z,1513230984.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:24.802Z,1513230984.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:24.847Z,1513230984.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:25.208Z,1513230985.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:25.226Z,1513230985.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:25.619Z,1513230985.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:25.651Z,1513230985.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:26.007Z,1513230986.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:26.045Z,1513230986.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:26.427Z,1513230986.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:26.467Z,1513230986.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:26.817Z,1513230986.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:26.886Z,1513230986.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:27.253Z,1513230987.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:27.275Z,1513230987.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:27.636Z,1513230987.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:27.683Z,1513230987.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:28.021Z,1513230988.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:28.064Z,1513230988.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:28.423Z,1513230988.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:28.477Z,1513230988.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:28.804Z,1513230988.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:28.831Z,1513230988.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:29.235Z,1513230989.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:29.286Z,1513230989.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:29.641Z,1513230989.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:29.660Z,1513230989.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:30.024Z,1513230990.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:30.059Z,1513230990.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:30.419Z,1513230990.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:30.452Z,1513230990.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:30.817Z,1513230990.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:30.864Z,1513230990.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:31.260Z,1513230991.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:31.276Z,1513230991.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:56:31.309Z,1513230991.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:31.602Z,1513230991.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:31.652Z,1513230991.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:32.012Z,1513230992.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:32.049Z,1513230992.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:32.404Z,1513230992.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:32.458Z,1513230992.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:32.811Z,1513230992.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:32.857Z,1513230992.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:33.220Z,1513230993.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:33.255Z,1513230993.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:33.627Z,1513230993.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:33.664Z,1513230993.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:34.011Z,1513230994.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:34.064Z,1513230994.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:34.417Z,1513230994.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:34.428Z,1513230994.428 [PNI_TCM](ERROR): CRC does not match. Expected:0x1170 got:0x6591
2017-12-14T05:56:34.468Z,1513230994.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:34.823Z,1513230994.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:34.878Z,1513230994.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:35.219Z,1513230995.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:35.244Z,1513230995.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:35.631Z,1513230995.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:35.674Z,1513230995.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:36.030Z,1513230996.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:36.079Z,1513230996.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:36.441Z,1513230996.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:36.485Z,1513230996.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:36.809Z,1513230996.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:36.851Z,1513230996.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:37.204Z,1513230997.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:37.266Z,1513230997.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:37.601Z,1513230997.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:37.652Z,1513230997.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:38.028Z,1513230998.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:38.068Z,1513230998.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:38.420Z,1513230998.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:38.479Z,1513230998.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:38.822Z,1513230998.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:38.879Z,1513230998.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:39.243Z,1513230999.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:39.257Z,1513230999.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:39.614Z,1513230999.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:39.629Z,1513230999.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:40.013Z,1513231000.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:40.072Z,1513231000.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:40.410Z,1513231000.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:40.447Z,1513231000.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:40.808Z,1513231000.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:40.867Z,1513231000.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:41.213Z,1513231001.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:41.230Z,1513231001.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:41.615Z,1513231001.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:41.635Z,1513231001.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:42.028Z,1513231002.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:42.053Z,1513231002.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:42.409Z,1513231002.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:42.454Z,1513231002.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:42.808Z,1513231002.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:42.818Z,1513231002.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x57955 got:0x7490
2017-12-14T05:56:42.852Z,1513231002.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:43.211Z,1513231003.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:43.231Z,1513231003.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:43.610Z,1513231003.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:43.653Z,1513231003.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:44.011Z,1513231004.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:44.033Z,1513231004.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:44.410Z,1513231004.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:44.427Z,1513231004.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:44.826Z,1513231004.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:44.847Z,1513231004.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:45.222Z,1513231005.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:45.244Z,1513231005.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:45.629Z,1513231005.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:45.644Z,1513231005.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:45.996Z,1513231005.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:46.035Z,1513231006.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:46.405Z,1513231006.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:46.430Z,1513231006.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:46.803Z,1513231006.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:46.840Z,1513231006.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:47.226Z,1513231007.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:47.245Z,1513231007.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:47.651Z,1513231007.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:47.684Z,1513231007.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:48.025Z,1513231008.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:48.047Z,1513231008.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:48.406Z,1513231008.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:48.439Z,1513231008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:48.799Z,1513231008.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:48.876Z,1513231008.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:49.203Z,1513231009.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:49.279Z,1513231009.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:49.605Z,1513231009.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:49.635Z,1513231009.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:50.000Z,1513231010.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:50.039Z,1513231010.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:50.403Z,1513231010.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:50.442Z,1513231010.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:50.848Z,1513231010.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:50.875Z,1513231010.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:51.238Z,1513231011.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:51.256Z,1513231011.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:51.614Z,1513231011.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:51.647Z,1513231011.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:51.998Z,1513231011.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:52.033Z,1513231012.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:52.406Z,1513231012.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:52.440Z,1513231012.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:52.814Z,1513231012.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:52.832Z,1513231012.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:53.206Z,1513231013.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:53.242Z,1513231013.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:53.612Z,1513231013.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:53.655Z,1513231013.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:54.059Z,1513231014.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:54.102Z,1513231014.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:54.424Z,1513231014.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:54.453Z,1513231014.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:54.818Z,1513231014.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:54.852Z,1513231014.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:55.208Z,1513231015.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:55.221Z,1513231015.221 [PNI_TCM](ERROR): CRC does not match. Expected:0x13807 got:0x49334
2017-12-14T05:56:55.252Z,1513231015.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:55.615Z,1513231015.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:55.623Z,1513231015.623 [PNI_TCM](ERROR): CRC does not match. Expected:0x41231 got:0x7490
2017-12-14T05:56:55.662Z,1513231015.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:56.018Z,1513231016.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:56.033Z,1513231016.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:56.413Z,1513231016.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:56.452Z,1513231016.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:56.813Z,1513231016.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:56.837Z,1513231016.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:57.223Z,1513231017.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:57.240Z,1513231017.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:57.623Z,1513231017.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:57.644Z,1513231017.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:58.012Z,1513231018.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:58.044Z,1513231018.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:58.411Z,1513231018.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:58.433Z,1513231018.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:58.808Z,1513231018.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:58.835Z,1513231018.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:59.209Z,1513231019.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:59.231Z,1513231019.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:56:59.616Z,1513231019.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:56:59.663Z,1513231019.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:00.034Z,1513231020.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:00.040Z,1513231020.040 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T05:57:00.078Z,1513231020.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:00.436Z,1513231020.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:00.464Z,1513231020.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:00.823Z,1513231020.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:00.838Z,1513231020.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:01.206Z,1513231021.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:01.291Z,1513231021.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:01.599Z,1513231021.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:01.670Z,1513231021.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:02.005Z,1513231022.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:02.034Z,1513231022.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:02.406Z,1513231022.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:02.457Z,1513231022.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:02.834Z,1513231022.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:02.849Z,1513231022.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:03.223Z,1513231023.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:03.279Z,1513231023.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:03.640Z,1513231023.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:03.667Z,1513231023.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:04.010Z,1513231024.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:04.038Z,1513231024.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:04.406Z,1513231024.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:04.449Z,1513231024.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:04.810Z,1513231024.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:04.849Z,1513231024.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:05.219Z,1513231025.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:05.247Z,1513231025.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:05.617Z,1513231025.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:05.650Z,1513231025.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:06.055Z,1513231026.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:06.075Z,1513231026.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:06.424Z,1513231026.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:06.455Z,1513231026.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:06.821Z,1513231026.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:06.912Z,1513231026.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:07.213Z,1513231027.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:07.228Z,1513231027.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:07.609Z,1513231027.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:07.643Z,1513231027.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:08.010Z,1513231028.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:08.032Z,1513231028.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:11.665Z,1513231031.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:11.711Z,1513231031.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:11.822Z,1513231031.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:11.862Z,1513231031.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:12.178Z,1513231032.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:12.192Z,1513231032.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:12.576Z,1513231032.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:12.595Z,1513231032.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:13.007Z,1513231033.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:13.022Z,1513231033.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:13.372Z,1513231033.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:13.391Z,1513231033.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:13.769Z,1513231033.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:13.783Z,1513231033.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:14.163Z,1513231034.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:14.211Z,1513231034.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:14.584Z,1513231034.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:14.627Z,1513231034.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:15.031Z,1513231035.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:15.076Z,1513231035.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:15.395Z,1513231035.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:15.411Z,1513231035.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:15.759Z,1513231035.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:15.781Z,1513231035.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:15.814Z,1513231035.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:16.166Z,1513231036.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:16.186Z,1513231036.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:16.205Z,1513231036.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:16.570Z,1513231036.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:16.589Z,1513231036.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:16.652Z,1513231036.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:16.978Z,1513231036.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:17.003Z,1513231037.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:17.377Z,1513231037.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:17.403Z,1513231037.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:17.767Z,1513231037.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:17.807Z,1513231037.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:18.166Z,1513231038.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:18.181Z,1513231038.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:18.567Z,1513231038.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:18.582Z,1513231038.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:18.978Z,1513231038.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:18.995Z,1513231038.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:19.381Z,1513231039.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:19.400Z,1513231039.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:19.781Z,1513231039.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:19.803Z,1513231039.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:20.165Z,1513231040.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:20.187Z,1513231040.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:20.567Z,1513231040.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:20.586Z,1513231040.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:20.961Z,1513231040.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:20.990Z,1513231040.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:21.365Z,1513231041.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:21.396Z,1513231041.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:21.770Z,1513231041.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:21.796Z,1513231041.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:22.182Z,1513231042.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:22.199Z,1513231042.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:22.666Z,1513231042.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:22.707Z,1513231042.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:22.964Z,1513231042.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:22.994Z,1513231042.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:23.373Z,1513231043.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:23.389Z,1513231043.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:23.770Z,1513231043.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:23.847Z,1513231043.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:24.167Z,1513231044.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:24.182Z,1513231044.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:24.562Z,1513231044.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:24.600Z,1513231044.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:24.976Z,1513231044.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:24.994Z,1513231044.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:25.382Z,1513231045.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:25.430Z,1513231045.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:25.778Z,1513231045.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:25.793Z,1513231045.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:26.159Z,1513231046.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:26.198Z,1513231046.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:26.562Z,1513231046.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:26.594Z,1513231046.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:27.125Z,1513231047.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:27.158Z,1513231047.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:27.356Z,1513231047.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:27.391Z,1513231047.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:27.782Z,1513231047.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:27.797Z,1513231047.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:28.187Z,1513231048.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:28.201Z,1513231048.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:28.222Z,1513231048.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:28.575Z,1513231048.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:28.597Z,1513231048.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:29.017Z,1513231049.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:29.055Z,1513231049.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:29.096Z,1513231049.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:29.365Z,1513231049.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:29.380Z,1513231049.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:29.429Z,1513231049.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:29.763Z,1513231049.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:29.783Z,1513231049.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:30.165Z,1513231050.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:30.179Z,1513231050.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:30.564Z,1513231050.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:30.579Z,1513231050.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:30.973Z,1513231050.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:31.004Z,1513231051.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:31.384Z,1513231051.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:31.407Z,1513231051.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:31.781Z,1513231051.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:31.796Z,1513231051.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:32.156Z,1513231052.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:32.183Z,1513231052.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:32.558Z,1513231052.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:32.658Z,1513231052.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:32.964Z,1513231052.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:33.002Z,1513231053.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:33.359Z,1513231053.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:33.399Z,1513231053.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:33.773Z,1513231053.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:33.828Z,1513231053.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:34.173Z,1513231054.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:34.202Z,1513231054.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:34.578Z,1513231054.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:34.670Z,1513231054.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:34.964Z,1513231054.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:34.978Z,1513231054.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:35.379Z,1513231055.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:35.435Z,1513231055.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:35.767Z,1513231055.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:35.782Z,1513231055.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:36.167Z,1513231056.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:36.187Z,1513231056.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:36.568Z,1513231056.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:36.583Z,1513231056.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:36.974Z,1513231056.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:36.997Z,1513231056.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:37.383Z,1513231057.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:37.398Z,1513231057.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:37.779Z,1513231057.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:37.794Z,1513231057.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:38.159Z,1513231058.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:38.192Z,1513231058.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:38.590Z,1513231058.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:38.631Z,1513231058.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:38.959Z,1513231058.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:38.993Z,1513231058.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:39.363Z,1513231059.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:39.389Z,1513231059.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:39.779Z,1513231059.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:39.793Z,1513231059.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:40.188Z,1513231060.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:40.207Z,1513231060.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:40.569Z,1513231060.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:40.599Z,1513231060.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:41.026Z,1513231061.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:41.044Z,1513231061.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:41.369Z,1513231061.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:41.384Z,1513231061.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:41.771Z,1513231061.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:41.786Z,1513231061.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:42.169Z,1513231062.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:42.191Z,1513231062.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:42.568Z,1513231062.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:42.584Z,1513231062.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:43.038Z,1513231063.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:43.059Z,1513231063.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:43.378Z,1513231063.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:43.401Z,1513231063.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:43.784Z,1513231063.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:43.799Z,1513231063.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:44.193Z,1513231064.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:44.209Z,1513231064.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:44.562Z,1513231064.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:44.591Z,1513231064.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:44.997Z,1513231064.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:45.037Z,1513231065.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:45.364Z,1513231065.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:45.380Z,1513231065.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:45.778Z,1513231065.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:45.832Z,1513231065.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:46.182Z,1513231066.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:46.260Z,1513231066.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:46.573Z,1513231066.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:46.623Z,1513231066.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:46.965Z,1513231066.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:46.981Z,1513231066.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:47.371Z,1513231067.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:47.427Z,1513231067.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:47.770Z,1513231067.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:47.791Z,1513231067.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:48.223Z,1513231068.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:48.275Z,1513231068.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:48.574Z,1513231068.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:48.588Z,1513231068.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:48.982Z,1513231068.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:49.015Z,1513231069.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:49.377Z,1513231069.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:49.405Z,1513231069.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:49.781Z,1513231069.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:49.796Z,1513231069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:50.159Z,1513231070.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:50.191Z,1513231070.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:50.559Z,1513231070.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:50.585Z,1513231070.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:50.960Z,1513231070.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:50.996Z,1513231070.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:51.409Z,1513231071.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:51.456Z,1513231071.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:51.778Z,1513231071.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:51.793Z,1513231071.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:51.793Z,1513231071.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2017-12-14T05:57:51.793Z,1513231071.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T05:57:51.795Z,1513231071.795 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:51.795Z,1513231071.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109
2017-12-14T05:57:51.795Z,1513231071.795 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T05:57:51.797Z,1513231071.797 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:51.797Z,1513231071.797 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2017-12-14T05:57:51.798Z,1513231071.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T05:57:51.809Z,1513231071.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T05:57:51.810Z,1513231071.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T05:57:51.810Z,1513231071.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T05:57:52.181Z,1513231072.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:52.214Z,1513231072.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T05:57:52.214Z,1513231072.214 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2017-12-14T05:57:52.214Z,1513231072.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T05:57:52.214Z,1513231072.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109
2017-12-14T05:57:52.215Z,1513231072.215 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T05:57:52.215Z,1513231072.215 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2017-12-14T05:57:52.570Z,1513231072.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:52.600Z,1513231072.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T05:57:52.601Z,1513231072.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:57:52.601Z,1513231072.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:57:52.602Z,1513231072.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T05:57:52.602Z,1513231072.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:57:52.602Z,1513231072.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:57:52.603Z,1513231072.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T05:57:52.603Z,1513231072.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T05:57:52.603Z,1513231072.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T05:57:52.969Z,1513231072.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:52.983Z,1513231072.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:53.365Z,1513231073.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:53.392Z,1513231073.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:53.769Z,1513231073.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:53.783Z,1513231073.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:54.166Z,1513231074.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:54.180Z,1513231074.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:54.575Z,1513231074.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:54.612Z,1513231074.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:55.028Z,1513231075.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:55.060Z,1513231075.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:55.377Z,1513231075.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:55.404Z,1513231075.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:55.782Z,1513231075.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:55.811Z,1513231075.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:56.172Z,1513231076.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:56.203Z,1513231076.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:56.564Z,1513231076.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:56.618Z,1513231076.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:57.025Z,1513231077.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:57.064Z,1513231077.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:57.367Z,1513231077.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:57.400Z,1513231077.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:57.807Z,1513231077.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:57.831Z,1513231077.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:58.182Z,1513231078.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:58.216Z,1513231078.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:58.575Z,1513231078.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:58.650Z,1513231078.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:58.966Z,1513231078.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:58.988Z,1513231078.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:59.371Z,1513231079.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:59.386Z,1513231079.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:57:59.758Z,1513231079.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:57:59.792Z,1513231079.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:00.169Z,1513231080.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:00.235Z,1513231080.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:00.567Z,1513231080.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:00.581Z,1513231080.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:01.042Z,1513231081.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:01.063Z,1513231081.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:01.393Z,1513231081.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:01.409Z,1513231081.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:01.782Z,1513231081.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:01.797Z,1513231081.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:02.159Z,1513231082.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:02.190Z,1513231082.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:02.559Z,1513231082.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:02.595Z,1513231082.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:02.960Z,1513231082.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:02.999Z,1513231082.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:03.363Z,1513231083.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:03.399Z,1513231083.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:03.770Z,1513231083.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:03.803Z,1513231083.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:04.201Z,1513231084.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:04.248Z,1513231084.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:04.570Z,1513231084.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:04.644Z,1513231084.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:04.964Z,1513231084.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:05.010Z,1513231085.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:05.371Z,1513231085.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:05.389Z,1513231085.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:05.764Z,1513231085.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:05.787Z,1513231085.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:06.166Z,1513231086.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:06.180Z,1513231086.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:06.567Z,1513231086.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:06.587Z,1513231086.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:06.970Z,1513231086.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:06.984Z,1513231086.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:07.391Z,1513231087.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:07.424Z,1513231087.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:07.778Z,1513231087.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:07.786Z,1513231087.786 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T05:58:07.786Z,1513231087.786 [BPC1] Data Fault, FailCount= 1
2017-12-14T05:58:07.786Z,1513231087.786 [BPC1](ERROR): Data Fault
2017-12-14T05:58:07.794Z,1513231087.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:07.839Z,1513231087.839 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T05:58:08.172Z,1513231088.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:08.195Z,1513231088.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:11.671Z,1513231091.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:11.686Z,1513231091.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:11.783Z,1513231091.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:11.826Z,1513231091.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:11.840Z,1513231091.840 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T05:58:11.840Z,1513231091.840 [BPC1] No Fault, FailCount= 1
2017-12-14T05:58:12.164Z,1513231092.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:12.235Z,1513231092.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:12.561Z,1513231092.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:12.576Z,1513231092.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:12.959Z,1513231092.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:12.982Z,1513231092.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:13.339Z,1513231093.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:13.358Z,1513231093.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:13.786Z,1513231093.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:13.842Z,1513231093.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:14.141Z,1513231094.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:14.155Z,1513231094.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:14.557Z,1513231094.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:14.581Z,1513231094.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:14.950Z,1513231094.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:14.965Z,1513231094.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:15.348Z,1513231095.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:15.364Z,1513231095.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:15.742Z,1513231095.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:15.768Z,1513231095.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:16.142Z,1513231096.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:16.156Z,1513231096.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:16.550Z,1513231096.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:16.573Z,1513231096.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:16.991Z,1513231096.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:17.031Z,1513231097.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:17.356Z,1513231097.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:17.375Z,1513231097.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:17.739Z,1513231097.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:17.771Z,1513231097.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:18.139Z,1513231098.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:18.164Z,1513231098.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:18.533Z,1513231098.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:18.567Z,1513231098.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:18.952Z,1513231098.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:18.972Z,1513231098.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:19.359Z,1513231099.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:19.375Z,1513231099.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:19.760Z,1513231099.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:19.775Z,1513231099.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:20.162Z,1513231100.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:20.185Z,1513231100.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:20.555Z,1513231100.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:20.614Z,1513231100.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:20.936Z,1513231100.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:20.971Z,1513231100.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:21.339Z,1513231101.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:21.363Z,1513231101.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:21.758Z,1513231101.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:21.787Z,1513231101.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:22.148Z,1513231102.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:22.167Z,1513231102.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:22.559Z,1513231102.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:22.588Z,1513231102.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:22.971Z,1513231102.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:23.024Z,1513231103.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:23.397Z,1513231103.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:23.444Z,1513231103.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:23.747Z,1513231103.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:23.767Z,1513231103.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:24.148Z,1513231104.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:24.163Z,1513231104.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:24.206Z,1513231104.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:24.542Z,1513231104.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:24.569Z,1513231104.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:24.982Z,1513231104.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:25.002Z,1513231105.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:25.039Z,1513231105.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:25.361Z,1513231105.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:25.376Z,1513231105.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:25.413Z,1513231105.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:25.745Z,1513231105.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:25.775Z,1513231105.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:26.138Z,1513231106.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:26.170Z,1513231106.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:26.565Z,1513231106.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:26.686Z,1513231106.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:26.944Z,1513231106.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:26.959Z,1513231106.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:27.342Z,1513231107.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:27.358Z,1513231107.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:27.750Z,1513231107.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:27.765Z,1513231107.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:28.153Z,1513231108.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:28.168Z,1513231108.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:28.548Z,1513231108.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:28.579Z,1513231108.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:28.940Z,1513231108.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:28.955Z,1513231108.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:29.342Z,1513231109.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:29.359Z,1513231109.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:29.742Z,1513231109.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:29.760Z,1513231109.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:30.143Z,1513231110.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:30.159Z,1513231110.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:30.544Z,1513231110.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:30.559Z,1513231110.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:30.926Z,1513231110.926 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T05:58:30.926Z,1513231110.926 [NAL9602] Data Fault, FailCount= 5
2017-12-14T05:58:30.926Z,1513231110.926 [NAL9602](ERROR): Data Fault
2017-12-14T05:58:30.955Z,1513231110.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:30.979Z,1513231110.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:31.009Z,1513231111.009 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T05:58:31.009Z,1513231111.009 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T05:58:31.326Z,1513231111.326 [NAL9602](INFO): Powering down
2017-12-14T05:58:31.359Z,1513231111.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:31.375Z,1513231111.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:31.395Z,1513231111.395 [CBIT](INFO): Critical error at 20171214T055831
2017-12-14T05:58:31.735Z,1513231111.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:31.768Z,1513231111.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:32.135Z,1513231112.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:32.161Z,1513231112.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:32.533Z,1513231112.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:32.664Z,1513231112.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:32.969Z,1513231112.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:33.002Z,1513231113.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:33.343Z,1513231113.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:33.359Z,1513231113.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:33.743Z,1513231113.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:33.791Z,1513231113.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:34.144Z,1513231114.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:34.161Z,1513231114.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:34.539Z,1513231114.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:34.594Z,1513231114.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:34.954Z,1513231114.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:34.968Z,1513231114.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:35.334Z,1513231115.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:35.367Z,1513231115.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:35.732Z,1513231115.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:35.755Z,1513231115.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:36.190Z,1513231116.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:36.219Z,1513231116.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:36.530Z,1513231116.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:36.544Z,1513231116.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:36.964Z,1513231116.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:37.036Z,1513231117.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:37.338Z,1513231117.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:37.375Z,1513231117.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:37.742Z,1513231117.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:37.756Z,1513231117.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:38.131Z,1513231118.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:38.147Z,1513231118.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:38.206Z,1513231118.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:38.542Z,1513231118.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:38.557Z,1513231118.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:39.001Z,1513231119.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:39.016Z,1513231119.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:39.047Z,1513231119.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:39.383Z,1513231119.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:39.411Z,1513231119.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:39.437Z,1513231119.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:39.741Z,1513231119.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:39.764Z,1513231119.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:40.128Z,1513231120.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:40.162Z,1513231120.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:40.527Z,1513231120.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:40.563Z,1513231120.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:40.934Z,1513231120.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:40.958Z,1513231120.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:41.334Z,1513231121.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:41.357Z,1513231121.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:41.745Z,1513231121.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:41.759Z,1513231121.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:42.134Z,1513231122.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:42.159Z,1513231122.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:42.567Z,1513231122.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:42.660Z,1513231122.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:42.943Z,1513231122.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:42.958Z,1513231122.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:43.338Z,1513231123.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:43.358Z,1513231123.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:43.742Z,1513231123.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:43.757Z,1513231123.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:44.144Z,1513231124.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:44.159Z,1513231124.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:44.541Z,1513231124.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:44.555Z,1513231124.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:44.934Z,1513231124.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:44.959Z,1513231124.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:45.334Z,1513231125.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:45.375Z,1513231125.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:45.734Z,1513231125.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:45.750Z,1513231125.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:46.139Z,1513231126.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:46.154Z,1513231126.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:46.538Z,1513231126.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:46.553Z,1513231126.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:46.941Z,1513231126.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:46.963Z,1513231126.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:47.343Z,1513231127.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:47.363Z,1513231127.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:47.746Z,1513231127.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:47.761Z,1513231127.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:48.141Z,1513231128.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:48.155Z,1513231128.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:48.531Z,1513231128.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:48.555Z,1513231128.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:48.972Z,1513231128.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:49.007Z,1513231129.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:49.355Z,1513231129.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:49.370Z,1513231129.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:49.734Z,1513231129.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:49.767Z,1513231129.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:50.138Z,1513231130.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:50.163Z,1513231130.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:50.534Z,1513231130.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:50.559Z,1513231130.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:50.956Z,1513231130.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:51.022Z,1513231131.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:51.334Z,1513231131.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:51.365Z,1513231131.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:51.738Z,1513231131.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:51.752Z,1513231131.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:52.180Z,1513231132.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:52.224Z,1513231132.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:52.540Z,1513231132.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:52.555Z,1513231132.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:52.978Z,1513231132.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:53.035Z,1513231133.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:53.344Z,1513231133.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:53.358Z,1513231133.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:53.740Z,1513231133.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:53.755Z,1513231133.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:54.141Z,1513231134.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:54.155Z,1513231134.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:54.544Z,1513231134.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:54.698Z,1513231134.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:54.932Z,1513231134.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:54.956Z,1513231134.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:55.375Z,1513231135.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:55.439Z,1513231135.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:55.734Z,1513231135.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:55.751Z,1513231135.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:56.131Z,1513231136.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:56.186Z,1513231136.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:56.539Z,1513231136.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:56.554Z,1513231136.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:56.938Z,1513231136.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:56.953Z,1513231136.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:57.340Z,1513231137.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:57.355Z,1513231137.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:57.740Z,1513231137.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:57.755Z,1513231137.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:58.138Z,1513231138.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:58.153Z,1513231138.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:58.572Z,1513231138.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:58.656Z,1513231138.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:58.951Z,1513231138.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:58.966Z,1513231138.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:59.342Z,1513231139.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:59.357Z,1513231139.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:58:59.744Z,1513231139.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:58:59.761Z,1513231139.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:00.140Z,1513231140.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:00.155Z,1513231140.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:00.539Z,1513231140.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:00.554Z,1513231140.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:00.935Z,1513231140.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:00.990Z,1513231140.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:01.339Z,1513231141.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:01.365Z,1513231141.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:01.734Z,1513231141.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:01.767Z,1513231141.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:02.134Z,1513231142.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:02.148Z,1513231142.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:02.534Z,1513231142.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:02.549Z,1513231142.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:02.935Z,1513231142.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:02.951Z,1513231142.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:03.338Z,1513231143.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:03.352Z,1513231143.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:03.739Z,1513231143.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:03.759Z,1513231143.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:04.142Z,1513231144.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:04.157Z,1513231144.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:04.534Z,1513231144.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:04.590Z,1513231144.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:05.046Z,1513231145.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:05.087Z,1513231145.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:05.342Z,1513231145.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:05.363Z,1513231145.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:05.746Z,1513231145.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:05.761Z,1513231145.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:06.148Z,1513231146.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:06.167Z,1513231146.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:06.541Z,1513231146.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:06.557Z,1513231146.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:06.977Z,1513231146.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:07.029Z,1513231147.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:07.334Z,1513231147.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:07.375Z,1513231147.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:07.738Z,1513231147.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:07.752Z,1513231147.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:08.138Z,1513231148.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:08.152Z,1513231148.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:08.178Z,1513231148.178 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T05:59:08.540Z,1513231148.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:08.555Z,1513231148.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:11.942Z,1513231151.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:11.958Z,1513231151.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:11.972Z,1513231151.972 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T05:59:11.972Z,1513231151.972 [DropWeight] No Fault, FailCount= 1
2017-12-14T05:59:12.062Z,1513231152.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:12.090Z,1513231152.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:12.421Z,1513231152.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:12.443Z,1513231152.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:12.825Z,1513231152.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:12.847Z,1513231152.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:13.216Z,1513231153.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:13.244Z,1513231153.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:13.619Z,1513231153.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:13.633Z,1513231153.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:14.018Z,1513231154.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:14.055Z,1513231154.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:14.424Z,1513231154.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:14.431Z,1513231154.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x56014 got:0x15797
2017-12-14T05:59:14.475Z,1513231154.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:14.834Z,1513231154.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:14.848Z,1513231154.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:15.226Z,1513231155.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:15.240Z,1513231155.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:15.618Z,1513231155.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:15.655Z,1513231155.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:16.010Z,1513231156.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:16.027Z,1513231156.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x41171 got:0x24917
2017-12-14T05:59:16.048Z,1513231156.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:16.423Z,1513231156.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:16.512Z,1513231156.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:16.812Z,1513231156.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:16.837Z,1513231156.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:17.214Z,1513231157.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:17.278Z,1513231157.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:17.606Z,1513231157.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:17.647Z,1513231157.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:18.011Z,1513231158.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:18.019Z,1513231158.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T05:59:18.083Z,1513231158.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:18.415Z,1513231158.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:18.438Z,1513231158.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:18.810Z,1513231158.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:18.844Z,1513231158.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:19.205Z,1513231159.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:19.246Z,1513231159.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:19.616Z,1513231159.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:19.646Z,1513231159.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:20.004Z,1513231160.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:20.019Z,1513231160.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:20.404Z,1513231160.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:20.455Z,1513231160.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:20.810Z,1513231160.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:20.894Z,1513231160.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:21.222Z,1513231161.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:21.236Z,1513231161.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:21.615Z,1513231161.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:21.630Z,1513231161.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:22.015Z,1513231162.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:22.054Z,1513231162.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:22.406Z,1513231162.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:22.441Z,1513231162.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:22.819Z,1513231162.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:22.835Z,1513231162.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:23.221Z,1513231163.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:23.244Z,1513231163.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:23.619Z,1513231163.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:23.662Z,1513231163.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:24.008Z,1513231164.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:24.027Z,1513231164.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x36997 got:0x128
2017-12-14T05:59:24.057Z,1513231164.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:24.436Z,1513231164.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:24.463Z,1513231164.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:24.818Z,1513231164.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:24.834Z,1513231164.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:25.217Z,1513231165.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:25.262Z,1513231165.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:25.623Z,1513231165.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:25.630Z,1513231165.630 [PNI_TCM](ERROR): CRC does not match. Expected:0x5276 got:0x6238
2017-12-14T05:59:25.670Z,1513231165.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:26.017Z,1513231166.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:26.046Z,1513231166.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:26.418Z,1513231166.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:26.472Z,1513231166.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:26.816Z,1513231166.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:26.855Z,1513231166.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:27.254Z,1513231167.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:27.276Z,1513231167.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x39179 got:0x6977
2017-12-14T05:59:27.317Z,1513231167.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:27.619Z,1513231167.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:27.634Z,1513231167.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:28.018Z,1513231168.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:28.045Z,1513231168.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:28.419Z,1513231168.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:28.459Z,1513231168.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:28.807Z,1513231168.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:28.831Z,1513231168.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x16244 got:0x46291
2017-12-14T05:59:28.860Z,1513231168.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:29.207Z,1513231169.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:29.239Z,1513231169.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:29.618Z,1513231169.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:29.640Z,1513231169.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:29.000Z,1513231170.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:30.034Z,1513231170.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:30.431Z,1513231170.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:30.463Z,1513231170.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:30.811Z,1513231170.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:30.842Z,1513231170.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:31.216Z,1513231171.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:31.251Z,1513231171.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:31.615Z,1513231171.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:31.655Z,1513231171.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:32.008Z,1513231172.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:32.030Z,1513231172.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:32.413Z,1513231172.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:32.428Z,1513231172.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:32.822Z,1513231172.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:32.854Z,1513231172.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:33.223Z,1513231173.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:33.256Z,1513231173.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:33.651Z,1513231173.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:33.670Z,1513231173.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:34.021Z,1513231174.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:34.036Z,1513231174.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:34.419Z,1513231174.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:34.434Z,1513231174.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:34.812Z,1513231174.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:34.849Z,1513231174.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:35.221Z,1513231175.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:35.229Z,1513231175.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T05:59:35.263Z,1513231175.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:35.622Z,1513231175.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:35.636Z,1513231175.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:36.019Z,1513231176.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:36.034Z,1513231176.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:36.412Z,1513231176.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:36.440Z,1513231176.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:36.837Z,1513231176.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:36.869Z,1513231176.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:37.223Z,1513231177.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:37.238Z,1513231177.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:37.623Z,1513231177.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:37.638Z,1513231177.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:38.017Z,1513231178.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:38.076Z,1513231178.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:38.423Z,1513231178.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:38.430Z,1513231178.430 [PNI_TCM](ERROR): CRC does not match. Expected:0x35103 got:0x34277
2017-12-14T05:59:38.484Z,1513231178.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:38.821Z,1513231178.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:38.837Z,1513231178.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:39.211Z,1513231179.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:39.253Z,1513231179.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:39.619Z,1513231179.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:39.641Z,1513231179.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:40.048Z,1513231180.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:40.115Z,1513231180.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:40.427Z,1513231180.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:40.442Z,1513231180.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:40.817Z,1513231180.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:40.832Z,1513231180.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:41.214Z,1513231181.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:41.240Z,1513231181.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:41.624Z,1513231181.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:41.638Z,1513231181.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:42.017Z,1513231182.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:42.040Z,1513231182.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:42.421Z,1513231182.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:42.435Z,1513231182.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:42.814Z,1513231182.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:42.839Z,1513231182.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:43.250Z,1513231183.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:43.291Z,1513231183.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:43.617Z,1513231183.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:43.643Z,1513231183.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:44.025Z,1513231184.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:44.039Z,1513231184.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:44.400Z,1513231184.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:44.439Z,1513231184.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:44.803Z,1513231184.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:44.846Z,1513231184.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:45.214Z,1513231185.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:45.245Z,1513231185.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:45.617Z,1513231185.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:45.638Z,1513231185.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:46.017Z,1513231186.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:46.047Z,1513231186.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:46.443Z,1513231186.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:46.449Z,1513231186.449 [PNI_TCM](ERROR): CRC does not match. Expected:0x58915 got:0x19129
2017-12-14T05:59:46.484Z,1513231186.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:46.821Z,1513231186.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:46.836Z,1513231186.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:47.220Z,1513231187.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:47.239Z,1513231187.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:47.617Z,1513231187.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:47.652Z,1513231187.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:47.000Z,1513231188.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:48.035Z,1513231188.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:48.423Z,1513231188.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:48.477Z,1513231188.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:48.823Z,1513231188.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:48.838Z,1513231188.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:49.207Z,1513231189.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:49.255Z,1513231189.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:49.656Z,1513231189.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:49.667Z,1513231189.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x52487 got:0x7490
2017-12-14T05:59:49.707Z,1513231189.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:50.010Z,1513231190.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:50.043Z,1513231190.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:50.415Z,1513231190.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:50.442Z,1513231190.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:50.806Z,1513231190.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:50.840Z,1513231190.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:51.208Z,1513231191.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:51.242Z,1513231191.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:51.627Z,1513231191.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:51.641Z,1513231191.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:52.029Z,1513231192.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:52.043Z,1513231192.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:52.174Z,1513231192.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:52.402Z,1513231192.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:52.446Z,1513231192.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:52.838Z,1513231192.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:52.862Z,1513231192.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:52.972Z,1513231192.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:53.229Z,1513231193.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:53.243Z,1513231193.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:53.377Z,1513231193.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:53.615Z,1513231193.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:53.640Z,1513231193.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:54.004Z,1513231194.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:54.050Z,1513231194.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:54.175Z,1513231194.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:54.411Z,1513231194.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:54.444Z,1513231194.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:54.809Z,1513231194.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:54.846Z,1513231194.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:54.970Z,1513231194.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:55.215Z,1513231195.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:55.250Z,1513231195.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:55.373Z,1513231195.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:55.613Z,1513231195.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:55.646Z,1513231195.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:56.042Z,1513231196.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:56.068Z,1513231196.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:56.418Z,1513231196.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:56.449Z,1513231196.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:56.827Z,1513231196.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:56.857Z,1513231196.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:57.214Z,1513231197.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:57.258Z,1513231197.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:57.622Z,1513231197.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:57.658Z,1513231197.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:58.021Z,1513231198.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:58.035Z,1513231198.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:58.419Z,1513231198.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:58.434Z,1513231198.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:58.823Z,1513231198.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:58.861Z,1513231198.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:59.225Z,1513231199.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:59.256Z,1513231199.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T05:59:59.610Z,1513231199.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T05:59:59.649Z,1513231199.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:00.014Z,1513231200.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:00.049Z,1513231200.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:00.162Z,1513231200.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:00.406Z,1513231200.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:00.483Z,1513231200.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:00.817Z,1513231200.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:00.860Z,1513231200.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:00.959Z,1513231200.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:01.211Z,1513231201.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:01.251Z,1513231201.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:01.393Z,1513231201.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:01.618Z,1513231201.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:01.655Z,1513231201.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:02.013Z,1513231202.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:02.055Z,1513231202.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:02.189Z,1513231202.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:02.421Z,1513231202.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:02.495Z,1513231202.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:02.815Z,1513231202.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:02.844Z,1513231202.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:02.987Z,1513231202.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:03.224Z,1513231203.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:03.247Z,1513231203.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:03.397Z,1513231203.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:03.619Z,1513231203.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:03.641Z,1513231203.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:04.023Z,1513231204.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:04.038Z,1513231204.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:04.193Z,1513231204.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:04.426Z,1513231204.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:04.441Z,1513231204.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:04.819Z,1513231204.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:04.834Z,1513231204.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:04.989Z,1513231204.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:05.215Z,1513231205.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:05.239Z,1513231205.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:05.393Z,1513231205.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:05.627Z,1513231205.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:05.641Z,1513231205.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T06:00:05.688Z,1513231205.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:06.014Z,1513231206.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:06.053Z,1513231206.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:06.189Z,1513231206.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:06.416Z,1513231206.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:06.454Z,1513231206.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:06.827Z,1513231206.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:06.856Z,1513231206.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:06.985Z,1513231206.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:07.224Z,1513231207.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:07.250Z,1513231207.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:07.389Z,1513231207.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:07.612Z,1513231207.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:07.653Z,1513231207.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:08.015Z,1513231208.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:08.050Z,1513231208.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:08.185Z,1513231208.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:08.409Z,1513231208.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:08.459Z,1513231208.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:08.858Z,1513231208.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:08.911Z,1513231208.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:08.984Z,1513231208.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:09.389Z,1513231209.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:10.186Z,1513231210.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:10.982Z,1513231210.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:11.385Z,1513231211.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:12.184Z,1513231212.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:12.254Z,1513231212.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:12.299Z,1513231212.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:12.401Z,1513231212.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:12.424Z,1513231212.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:12.754Z,1513231212.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:12.803Z,1513231212.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:12.977Z,1513231212.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:13.156Z,1513231213.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:13.182Z,1513231213.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:13.381Z,1513231213.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:13.557Z,1513231213.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:13.573Z,1513231213.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:13.964Z,1513231213.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:13.979Z,1513231213.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:14.177Z,1513231214.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:14.361Z,1513231214.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:14.376Z,1513231214.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:14.752Z,1513231214.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:14.769Z,1513231214.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:14.975Z,1513231214.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:15.154Z,1513231215.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:15.175Z,1513231215.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:15.381Z,1513231215.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:15.547Z,1513231215.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:15.583Z,1513231215.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:15.951Z,1513231215.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:15.978Z,1513231215.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:16.177Z,1513231216.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:16.348Z,1513231216.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:16.374Z,1513231216.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:16.752Z,1513231216.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:16.779Z,1513231216.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:16.975Z,1513231216.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:17.168Z,1513231217.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:17.184Z,1513231217.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:17.381Z,1513231217.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:17.547Z,1513231217.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:17.579Z,1513231217.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:17.944Z,1513231217.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:17.974Z,1513231217.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:18.177Z,1513231218.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:18.377Z,1513231218.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:18.408Z,1513231218.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:18.754Z,1513231218.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:18.769Z,1513231218.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:18.973Z,1513231218.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:19.160Z,1513231219.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:19.179Z,1513231219.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:19.377Z,1513231219.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:19.553Z,1513231219.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:19.570Z,1513231219.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:19.956Z,1513231219.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:19.971Z,1513231219.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:20.174Z,1513231220.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:20.354Z,1513231220.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:20.368Z,1513231220.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:20.755Z,1513231220.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:20.771Z,1513231220.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:20.969Z,1513231220.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:21.157Z,1513231221.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:21.172Z,1513231221.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:21.373Z,1513231221.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:21.573Z,1513231221.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:21.609Z,1513231221.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:21.947Z,1513231221.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:21.972Z,1513231221.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:22.169Z,1513231222.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:22.347Z,1513231222.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:22.374Z,1513231222.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:22.747Z,1513231222.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:22.778Z,1513231222.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:22.966Z,1513231222.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:23.148Z,1513231223.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:23.182Z,1513231223.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:23.369Z,1513231223.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:23.552Z,1513231223.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:23.582Z,1513231223.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:23.951Z,1513231223.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:23.982Z,1513231223.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:24.166Z,1513231224.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:24.347Z,1513231224.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:24.410Z,1513231224.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:24.805Z,1513231224.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:24.902Z,1513231224.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:24.962Z,1513231224.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:25.159Z,1513231225.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:25.174Z,1513231225.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:25.365Z,1513231225.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:25.552Z,1513231225.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:25.614Z,1513231225.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:25.957Z,1513231225.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:25.972Z,1513231225.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:26.162Z,1513231226.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:26.357Z,1513231226.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:26.401Z,1513231226.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:26.756Z,1513231226.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:26.771Z,1513231226.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:26.957Z,1513231226.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:27.150Z,1513231227.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:27.169Z,1513231227.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:27.361Z,1513231227.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:27.563Z,1513231227.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:27.578Z,1513231227.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:27.940Z,1513231227.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:28.003Z,1513231228.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:28.158Z,1513231228.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:28.346Z,1513231228.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:28.376Z,1513231228.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:28.757Z,1513231228.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:28.772Z,1513231228.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:28.955Z,1513231228.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:29.147Z,1513231229.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:29.172Z,1513231229.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:29.381Z,1513231229.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:29.547Z,1513231229.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:29.572Z,1513231229.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:29.948Z,1513231229.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:29.974Z,1513231229.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:30.178Z,1513231230.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:30.344Z,1513231230.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:30.372Z,1513231230.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:30.751Z,1513231230.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:30.778Z,1513231230.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:30.975Z,1513231230.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:31.147Z,1513231231.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:31.211Z,1513231231.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:31.262Z,1513231231.262 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:00:31.262Z,1513231231.262 [NAL9602] No Fault, FailCount= 5
2017-12-14T06:00:31.389Z,1513231231.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:31.530Z,1513231231.530 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:00:31.552Z,1513231231.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:31.571Z,1513231231.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:31.960Z,1513231231.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:31.974Z,1513231231.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:32.187Z,1513231232.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:32.351Z,1513231232.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:32.383Z,1513231232.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:32.756Z,1513231232.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:32.771Z,1513231232.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:32.982Z,1513231232.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:33.165Z,1513231233.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:33.180Z,1513231233.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:33.385Z,1513231233.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:33.560Z,1513231233.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:33.579Z,1513231233.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:33.957Z,1513231233.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:33.971Z,1513231233.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:34.182Z,1513231234.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:34.410Z,1513231234.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:34.472Z,1513231234.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:34.758Z,1513231234.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:34.791Z,1513231234.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:34.977Z,1513231234.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:35.166Z,1513231235.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:35.180Z,1513231235.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:35.381Z,1513231235.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:35.556Z,1513231235.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:35.571Z,1513231235.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:35.957Z,1513231235.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:35.979Z,1513231235.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:36.177Z,1513231236.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:36.358Z,1513231236.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:36.372Z,1513231236.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:36.758Z,1513231236.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:36.773Z,1513231236.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:36.973Z,1513231236.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:37.150Z,1513231237.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:37.181Z,1513231237.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:37.377Z,1513231237.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:37.569Z,1513231237.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:37.599Z,1513231237.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:37.947Z,1513231237.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:37.977Z,1513231237.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:38.173Z,1513231238.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:38.347Z,1513231238.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:38.380Z,1513231238.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:38.747Z,1513231238.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:38.779Z,1513231238.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:38.969Z,1513231238.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:39.148Z,1513231239.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:39.188Z,1513231239.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:39.373Z,1513231239.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:39.551Z,1513231239.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:39.584Z,1513231239.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:39.954Z,1513231239.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:39.982Z,1513231239.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:40.169Z,1513231240.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:40.347Z,1513231240.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:40.373Z,1513231240.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:40.762Z,1513231240.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:40.804Z,1513231240.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:40.965Z,1513231240.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:41.151Z,1513231241.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:41.187Z,1513231241.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:41.369Z,1513231241.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:41.552Z,1513231241.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:41.567Z,1513231241.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:41.967Z,1513231241.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:41.999Z,1513231241.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:42.165Z,1513231242.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:42.339Z,1513231242.339 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:00:42.357Z,1513231242.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:42.372Z,1513231242.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:42.756Z,1513231242.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:42.775Z,1513231242.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:42.963Z,1513231242.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:43.162Z,1513231243.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:43.183Z,1513231243.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:43.385Z,1513231243.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:43.566Z,1513231243.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:43.581Z,1513231243.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:43.972Z,1513231243.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:44.003Z,1513231244.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:44.181Z,1513231244.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:44.348Z,1513231244.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:44.376Z,1513231244.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:44.768Z,1513231244.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:44.784Z,1513231244.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:44.979Z,1513231244.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:45.149Z,1513231245.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:45.175Z,1513231245.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:45.389Z,1513231245.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:45.553Z,1513231245.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:45.580Z,1513231245.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:45.966Z,1513231245.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:46.034Z,1513231246.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:46.186Z,1513231246.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:46.373Z,1513231246.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:46.408Z,1513231246.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:46.772Z,1513231246.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:46.788Z,1513231246.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:46.981Z,1513231246.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:47.170Z,1513231247.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:47.232Z,1513231247.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:47.386Z,1513231247.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:47.564Z,1513231247.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:47.590Z,1513231247.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:47.952Z,1513231247.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:48.003Z,1513231248.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:48.181Z,1513231248.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:48.352Z,1513231248.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:48.387Z,1513231248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:48.754Z,1513231248.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:48.786Z,1513231248.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:48.977Z,1513231248.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:49.181Z,1513231249.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:49.195Z,1513231249.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:49.381Z,1513231249.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:49.565Z,1513231249.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:49.595Z,1513231249.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:49.963Z,1513231249.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:49.990Z,1513231249.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:50.177Z,1513231250.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:50.344Z,1513231250.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:50.432Z,1513231250.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:50.756Z,1513231250.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:50.772Z,1513231250.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:50.973Z,1513231250.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:51.152Z,1513231251.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:51.183Z,1513231251.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:51.377Z,1513231251.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:51.560Z,1513231251.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:51.574Z,1513231251.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:51.968Z,1513231251.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:51.983Z,1513231251.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:52.174Z,1513231252.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:52.366Z,1513231252.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:52.381Z,1513231252.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:52.766Z,1513231252.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:52.781Z,1513231252.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:52.781Z,1513231252.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2017-12-14T06:00:52.782Z,1513231252.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:00:52.783Z,1513231252.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:52.783Z,1513231252.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110
2017-12-14T06:00:52.783Z,1513231252.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:00:52.786Z,1513231252.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:52.786Z,1513231252.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2017-12-14T06:00:52.786Z,1513231252.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:00:52.823Z,1513231252.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:00:52.824Z,1513231252.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:00:52.824Z,1513231252.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:00:52.969Z,1513231252.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:53.168Z,1513231253.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:53.194Z,1513231253.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:00:53.195Z,1513231253.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2017-12-14T06:00:53.195Z,1513231253.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:00:53.195Z,1513231253.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110
2017-12-14T06:00:53.196Z,1513231253.196 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:00:53.196Z,1513231253.196 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2017-12-14T06:00:53.373Z,1513231253.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:53.547Z,1513231253.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:53.599Z,1513231253.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:00:53.600Z,1513231253.600 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:00:53.600Z,1513231253.600 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:00:53.600Z,1513231253.600 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:00:53.601Z,1513231253.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:00:53.601Z,1513231253.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:00:53.617Z,1513231253.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:00:53.619Z,1513231253.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:00:53.619Z,1513231253.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:00:53.948Z,1513231253.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:53.971Z,1513231253.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:54.170Z,1513231254.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:54.354Z,1513231254.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:54.375Z,1513231254.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:54.755Z,1513231254.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:54.770Z,1513231254.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:54.966Z,1513231254.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:55.162Z,1513231255.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:55.184Z,1513231255.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:55.369Z,1513231255.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:55.569Z,1513231255.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:55.584Z,1513231255.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:55.976Z,1513231255.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:56.011Z,1513231256.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:56.165Z,1513231256.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:56.355Z,1513231256.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:56.404Z,1513231256.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:56.793Z,1513231256.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:56.828Z,1513231256.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:56.963Z,1513231256.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:57.148Z,1513231257.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:57.189Z,1513231257.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:57.401Z,1513231257.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:57.547Z,1513231257.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:57.587Z,1513231257.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:57.970Z,1513231257.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:57.990Z,1513231257.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:58.198Z,1513231258.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:58.370Z,1513231258.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:58.395Z,1513231258.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:58.775Z,1513231258.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:58.790Z,1513231258.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:58.995Z,1513231258.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:59.148Z,1513231259.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:59.179Z,1513231259.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:59.397Z,1513231259.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:59.551Z,1513231259.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:59.589Z,1513231259.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:00:59.948Z,1513231259.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:00:59.962Z,1513231259.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:00.195Z,1513231260.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:00.354Z,1513231260.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:00.385Z,1513231260.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:00.753Z,1513231260.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:00.797Z,1513231260.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:00.989Z,1513231260.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:01.165Z,1513231261.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:01.210Z,1513231261.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:01.393Z,1513231261.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:01.562Z,1513231261.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:01.583Z,1513231261.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:01.965Z,1513231261.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:01.981Z,1513231261.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:02.189Z,1513231262.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:02.354Z,1513231262.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:02.368Z,1513231262.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:02.756Z,1513231262.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:02.774Z,1513231262.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:02.986Z,1513231262.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:03.202Z,1513231263.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:03.236Z,1513231263.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:03.389Z,1513231263.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:03.547Z,1513231263.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:03.575Z,1513231263.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:03.966Z,1513231263.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:03.989Z,1513231263.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:04.186Z,1513231264.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:04.369Z,1513231264.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:04.384Z,1513231264.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:04.772Z,1513231264.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:04.787Z,1513231264.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:04.981Z,1513231264.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:05.161Z,1513231265.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:05.181Z,1513231265.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:05.386Z,1513231265.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:05.547Z,1513231265.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:05.575Z,1513231265.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:05.949Z,1513231265.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:05.980Z,1513231265.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:06.182Z,1513231266.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:06.373Z,1513231266.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:06.406Z,1513231266.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:06.755Z,1513231266.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:06.786Z,1513231266.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:06.977Z,1513231266.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:07.184Z,1513231267.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:07.248Z,1513231267.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:07.381Z,1513231267.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:07.566Z,1513231267.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:07.599Z,1513231267.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:07.966Z,1513231267.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:07.999Z,1513231267.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:08.177Z,1513231268.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:08.344Z,1513231268.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:08.359Z,1513231268.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:08.752Z,1513231268.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:08.771Z,1513231268.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:08.973Z,1513231268.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:09.160Z,1513231269.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:09.179Z,1513231269.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:09.377Z,1513231269.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:10.173Z,1513231270.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:10.971Z,1513231270.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:11.385Z,1513231271.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:12.181Z,1513231272.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:12.610Z,1513231272.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:12.619Z,1513231272.619 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:01:12.619Z,1513231272.619 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:01:12.619Z,1513231272.619 [BPC1](ERROR): Communications Fault
2017-12-14T06:01:12.627Z,1513231272.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:12.631Z,1513231272.631 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T05:56:11.2Z
2017-12-14T06:01:12.631Z,1513231272.631 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:01:12.631Z,1513231272.631 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:01:12.669Z,1513231272.669 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:01:12.813Z,1513231272.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:12.862Z,1513231272.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:12.979Z,1513231272.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:13.401Z,1513231273.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:13.669Z,1513231273.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:13.696Z,1513231273.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:13.807Z,1513231273.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:13.850Z,1513231273.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:13.864Z,1513231273.864 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:01:13.864Z,1513231273.864 [BPC1] No Fault, FailCount= 1
2017-12-14T06:01:14.147Z,1513231274.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:14.227Z,1513231274.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:14.554Z,1513231274.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:14.569Z,1513231274.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:18.194Z,1513231278.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:18.990Z,1513231278.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:19.393Z,1513231279.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:20.085Z,1513231280.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:20.123Z,1513231280.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:20.230Z,1513231280.230 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0128.lzma
2017-12-14T06:01:20.265Z,1513231280.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:20.307Z,1513231280.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:20.686Z,1513231280.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:20.746Z,1513231280.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:21.032Z,1513231281.032 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0128.lzma.bak
2017-12-14T06:01:21.033Z,1513231281.033 [DataOverHttps](INFO): SBD MOMSN=5438000
2017-12-14T06:01:21.094Z,1513231281.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:21.138Z,1513231281.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:23.411Z,1513231283.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:23.464Z,1513231283.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:23.612Z,1513231283.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:23.660Z,1513231283.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:28.259Z,1513231288.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:28.290Z,1513231288.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:28.400Z,1513231288.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:28.446Z,1513231288.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:28.762Z,1513231288.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:28.798Z,1513231288.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:29.162Z,1513231289.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:29.235Z,1513231289.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:29.569Z,1513231289.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:29.588Z,1513231289.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:29.959Z,1513231289.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:29.974Z,1513231289.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:37.116Z,1513231297.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:37.214Z,1513231297.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:37.278Z,1513231297.278 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0129.lzma
2017-12-14T06:01:37.304Z,1513231297.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:37.335Z,1513231297.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:37.717Z,1513231297.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:37.771Z,1513231297.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:52.533Z,1513231312.533 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0129.lzma.bak
2017-12-14T06:01:52.534Z,1513231312.534 [DataOverHttps](INFO): SBD MOMSN=5438003
2017-12-14T06:01:52.591Z,1513231312.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:52.657Z,1513231312.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:54.161Z,1513231314.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:54.219Z,1513231314.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:54.222Z,1513231314.222 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:01:54.222Z,1513231314.222 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:01:54.222Z,1513231314.222 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:01:54.318Z,1513231314.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:54.362Z,1513231314.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:57.861Z,1513231317.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:57.875Z,1513231317.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:57.972Z,1513231317.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:58.038Z,1513231318.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:58.341Z,1513231318.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:58.356Z,1513231318.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:58.740Z,1513231318.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:58.756Z,1513231318.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:59.142Z,1513231319.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:59.157Z,1513231319.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:59.537Z,1513231319.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:59.552Z,1513231319.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:01:59.934Z,1513231319.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:01:59.949Z,1513231319.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:00.331Z,1513231320.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:00.348Z,1513231320.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:00.748Z,1513231320.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:00.787Z,1513231320.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:01.150Z,1513231321.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:01.207Z,1513231321.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:01.547Z,1513231321.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:01.561Z,1513231321.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:01.941Z,1513231321.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:01.957Z,1513231321.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:02.341Z,1513231322.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:02.380Z,1513231322.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:02.724Z,1513231322.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:02.754Z,1513231322.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:03.124Z,1513231323.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:03.152Z,1513231323.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:03.523Z,1513231323.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:03.557Z,1513231323.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:03.947Z,1513231323.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:03.961Z,1513231323.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:04.378Z,1513231324.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:04.416Z,1513231324.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:04.767Z,1513231324.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:04.812Z,1513231324.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:05.128Z,1513231325.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:05.165Z,1513231325.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:05.527Z,1513231325.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:05.561Z,1513231325.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:05.927Z,1513231325.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:05.961Z,1513231325.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:06.328Z,1513231326.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:06.360Z,1513231326.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:06.723Z,1513231326.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:06.759Z,1513231326.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:07.162Z,1513231327.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:07.176Z,1513231327.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:07.557Z,1513231327.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:07.585Z,1513231327.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:07.933Z,1513231327.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:07.963Z,1513231327.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:08.327Z,1513231328.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:08.341Z,1513231328.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:08.724Z,1513231328.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:08.763Z,1513231328.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:09.130Z,1513231329.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:09.146Z,1513231329.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:09.529Z,1513231329.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:09.543Z,1513231329.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:09.947Z,1513231329.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:09.977Z,1513231329.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:10.346Z,1513231330.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:10.379Z,1513231330.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:10.752Z,1513231330.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:10.786Z,1513231330.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:11.132Z,1513231331.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:11.147Z,1513231331.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:11.533Z,1513231331.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:11.548Z,1513231331.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:11.934Z,1513231331.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:11.949Z,1513231331.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:12.331Z,1513231332.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:12.351Z,1513231332.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:12.729Z,1513231332.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:12.787Z,1513231332.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:13.138Z,1513231333.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:13.160Z,1513231333.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:13.541Z,1513231333.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:13.606Z,1513231333.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:13.946Z,1513231333.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:14.021Z,1513231334.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:14.324Z,1513231334.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:14.363Z,1513231334.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:14.724Z,1513231334.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:14.790Z,1513231334.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:15.123Z,1513231335.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:15.156Z,1513231335.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:15.527Z,1513231335.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:15.575Z,1513231335.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:15.942Z,1513231335.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:15.963Z,1513231335.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:16.345Z,1513231336.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:16.367Z,1513231336.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:16.737Z,1513231336.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:16.771Z,1513231336.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:17.138Z,1513231337.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:17.197Z,1513231337.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:17.528Z,1513231337.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:17.558Z,1513231337.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:17.929Z,1513231337.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:17.943Z,1513231337.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:18.330Z,1513231338.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:18.344Z,1513231338.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:18.736Z,1513231338.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:18.779Z,1513231338.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:19.141Z,1513231339.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:19.175Z,1513231339.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:19.541Z,1513231339.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:19.570Z,1513231339.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:19.938Z,1513231339.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:19.965Z,1513231339.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:20.364Z,1513231340.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:20.424Z,1513231340.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:20.729Z,1513231340.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:20.744Z,1513231340.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:21.134Z,1513231341.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:21.149Z,1513231341.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:21.529Z,1513231341.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:21.543Z,1513231341.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:21.946Z,1513231341.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:21.977Z,1513231341.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:22.342Z,1513231342.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:22.369Z,1513231342.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:22.742Z,1513231342.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:22.794Z,1513231342.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:23.130Z,1513231343.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:23.157Z,1513231343.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:23.542Z,1513231343.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:23.588Z,1513231343.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:23.942Z,1513231343.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:24.006Z,1513231344.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:24.326Z,1513231344.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:24.346Z,1513231344.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:24.731Z,1513231344.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:24.747Z,1513231344.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:25.142Z,1513231345.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:25.164Z,1513231345.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:25.541Z,1513231345.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:25.563Z,1513231345.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:25.946Z,1513231345.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:25.960Z,1513231345.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:26.337Z,1513231346.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:26.352Z,1513231346.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:26.738Z,1513231346.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:26.773Z,1513231346.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:27.123Z,1513231347.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:27.159Z,1513231347.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:27.527Z,1513231347.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:27.559Z,1513231347.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:27.937Z,1513231347.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:27.964Z,1513231347.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:28.337Z,1513231348.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:28.370Z,1513231348.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:28.763Z,1513231348.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:28.783Z,1513231348.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:29.132Z,1513231349.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:29.148Z,1513231349.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:29.530Z,1513231349.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:29.549Z,1513231349.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:29.952Z,1513231349.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:29.984Z,1513231349.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:30.336Z,1513231350.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:30.356Z,1513231350.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:30.734Z,1513231350.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:30.751Z,1513231350.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:31.143Z,1513231351.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:31.159Z,1513231351.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:31.554Z,1513231351.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:31.587Z,1513231351.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:31.946Z,1513231351.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:31.967Z,1513231351.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:32.336Z,1513231352.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:32.355Z,1513231352.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:32.750Z,1513231352.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:32.766Z,1513231352.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:33.155Z,1513231353.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:33.195Z,1513231353.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:33.532Z,1513231353.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:33.549Z,1513231353.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:33.941Z,1513231353.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:33.963Z,1513231353.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:34.345Z,1513231354.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:34.367Z,1513231354.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:34.751Z,1513231354.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:34.843Z,1513231354.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:35.123Z,1513231355.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:35.161Z,1513231355.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:35.528Z,1513231355.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:35.566Z,1513231355.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:35.957Z,1513231355.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:36.022Z,1513231356.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:36.328Z,1513231356.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:36.363Z,1513231356.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:36.732Z,1513231356.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:36.779Z,1513231356.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:37.146Z,1513231357.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:37.170Z,1513231357.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:37.541Z,1513231357.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:37.569Z,1513231357.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:37.946Z,1513231357.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:37.976Z,1513231357.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:38.327Z,1513231358.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:38.344Z,1513231358.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:38.728Z,1513231358.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:38.744Z,1513231358.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:39.128Z,1513231359.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:39.151Z,1513231359.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:39.566Z,1513231359.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:39.594Z,1513231359.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:39.955Z,1513231359.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:39.986Z,1513231359.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:40.344Z,1513231360.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:40.416Z,1513231360.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:40.747Z,1513231360.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:40.762Z,1513231360.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:41.123Z,1513231361.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:41.165Z,1513231361.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:41.527Z,1513231361.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:41.559Z,1513231361.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:41.927Z,1513231361.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:41.955Z,1513231361.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:42.324Z,1513231362.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:42.351Z,1513231362.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:42.754Z,1513231362.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:42.822Z,1513231362.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:43.151Z,1513231363.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:43.180Z,1513231363.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:43.551Z,1513231363.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:43.575Z,1513231363.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:43.947Z,1513231363.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:43.961Z,1513231363.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:44.327Z,1513231364.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:44.342Z,1513231364.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:44.723Z,1513231364.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:44.739Z,1513231364.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:45.133Z,1513231365.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:45.179Z,1513231365.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:45.530Z,1513231365.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:45.547Z,1513231365.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:45.980Z,1513231365.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:46.023Z,1513231366.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:46.337Z,1513231366.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:46.355Z,1513231366.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:46.770Z,1513231366.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:46.787Z,1513231366.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:47.130Z,1513231367.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:47.154Z,1513231367.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:47.534Z,1513231367.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:47.605Z,1513231367.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:47.935Z,1513231367.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:47.951Z,1513231367.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:48.335Z,1513231368.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:48.351Z,1513231368.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:48.726Z,1513231368.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:48.803Z,1513231368.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:49.161Z,1513231369.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:49.198Z,1513231369.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:49.547Z,1513231369.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:49.562Z,1513231369.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:49.943Z,1513231369.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:49.959Z,1513231369.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:50.320Z,1513231370.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:50.357Z,1513231370.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:50.735Z,1513231370.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:50.751Z,1513231370.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:51.124Z,1513231371.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:51.150Z,1513231371.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:51.523Z,1513231371.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:51.592Z,1513231371.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:51.947Z,1513231371.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:51.962Z,1513231371.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:52.349Z,1513231372.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:52.402Z,1513231372.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:52.747Z,1513231372.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:52.767Z,1513231372.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:53.123Z,1513231373.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:53.155Z,1513231373.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:53.523Z,1513231373.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:53.549Z,1513231373.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:53.923Z,1513231373.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:53.951Z,1513231373.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:54.355Z,1513231374.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:54.418Z,1513231374.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:54.725Z,1513231374.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:54.760Z,1513231374.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:58.253Z,1513231378.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:58.338Z,1513231378.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:58.454Z,1513231378.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:58.472Z,1513231378.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:58.808Z,1513231378.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:58.845Z,1513231378.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:59.215Z,1513231379.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:59.267Z,1513231379.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:59.587Z,1513231379.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:02:59.634Z,1513231379.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:02:59.000Z,1513231380.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:00.039Z,1513231380.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:00.388Z,1513231380.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:00.427Z,1513231380.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:00.819Z,1513231380.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:00.834Z,1513231380.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:01.208Z,1513231381.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:01.251Z,1513231381.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:01.630Z,1513231381.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:01.656Z,1513231381.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:02.030Z,1513231382.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:02.066Z,1513231382.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:02.413Z,1513231382.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:02.427Z,1513231382.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:02.814Z,1513231382.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:02.860Z,1513231382.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:03.219Z,1513231383.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:03.235Z,1513231383.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:03.616Z,1513231383.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:03.630Z,1513231383.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:03.988Z,1513231383.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:04.027Z,1513231384.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:04.380Z,1513231384.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:04.431Z,1513231384.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:04.809Z,1513231384.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:04.831Z,1513231384.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:05.215Z,1513231385.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:05.241Z,1513231385.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:05.626Z,1513231385.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:05.647Z,1513231385.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:05.994Z,1513231385.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:06.028Z,1513231386.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:06.388Z,1513231386.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:06.408Z,1513231386.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:06.798Z,1513231386.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:06.829Z,1513231386.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:07.210Z,1513231387.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:07.231Z,1513231387.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:07.619Z,1513231387.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:07.789Z,1513231387.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:07.991Z,1513231387.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:08.038Z,1513231388.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:08.393Z,1513231388.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:08.444Z,1513231388.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:08.828Z,1513231388.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:08.848Z,1513231388.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:09.202Z,1513231389.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:09.243Z,1513231389.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:09.598Z,1513231389.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:09.616Z,1513231389.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:09.999Z,1513231389.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:10.021Z,1513231390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:10.399Z,1513231390.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:10.420Z,1513231390.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:10.800Z,1513231390.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:10.842Z,1513231390.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:11.202Z,1513231391.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:11.227Z,1513231391.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:11.609Z,1513231391.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:11.626Z,1513231391.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:12.051Z,1513231392.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:12.107Z,1513231392.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:12.398Z,1513231392.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:12.441Z,1513231392.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:12.821Z,1513231392.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:12.847Z,1513231392.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:13.211Z,1513231393.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:13.218Z,1513231393.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x21276 got:0x36824
2017-12-14T06:03:13.254Z,1513231393.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:13.610Z,1513231393.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:13.627Z,1513231393.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:14.001Z,1513231394.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:14.043Z,1513231394.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:14.397Z,1513231394.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:14.414Z,1513231394.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:14.812Z,1513231394.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:14.827Z,1513231394.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:15.223Z,1513231395.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:15.247Z,1513231395.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:15.607Z,1513231395.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:15.639Z,1513231395.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:16.004Z,1513231396.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:16.028Z,1513231396.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:16.392Z,1513231396.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:16.427Z,1513231396.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:16.818Z,1513231396.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:16.832Z,1513231396.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:17.217Z,1513231397.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:17.239Z,1513231397.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:17.610Z,1513231397.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:17.636Z,1513231397.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:17.991Z,1513231397.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:18.028Z,1513231398.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:18.423Z,1513231398.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:18.458Z,1513231398.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:18.809Z,1513231398.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:18.844Z,1513231398.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:19.214Z,1513231399.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:19.295Z,1513231399.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:19.624Z,1513231399.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:19.639Z,1513231399.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:19.995Z,1513231399.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:20.066Z,1513231400.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:20.386Z,1513231400.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:20.420Z,1513231400.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:20.797Z,1513231400.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:20.867Z,1513231400.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:21.207Z,1513231401.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:21.242Z,1513231401.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:21.619Z,1513231401.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:21.677Z,1513231401.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:21.995Z,1513231401.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:22.041Z,1513231402.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:22.394Z,1513231402.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:22.424Z,1513231402.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:22.797Z,1513231402.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:22.826Z,1513231402.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:23.223Z,1513231403.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:23.243Z,1513231403.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:23.602Z,1513231403.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:23.635Z,1513231403.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:23.991Z,1513231403.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:24.005Z,1513231404.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:24.385Z,1513231404.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:24.399Z,1513231404.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:24.824Z,1513231404.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:24.847Z,1513231404.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:25.220Z,1513231405.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:25.243Z,1513231405.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:25.605Z,1513231405.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:25.634Z,1513231405.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:25.995Z,1513231405.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:26.034Z,1513231406.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:26.397Z,1513231406.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:26.405Z,1513231406.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x37433 got:0x5659
2017-12-14T06:03:26.439Z,1513231406.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:26.810Z,1513231406.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:26.842Z,1513231406.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:27.229Z,1513231407.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:27.244Z,1513231407.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:27.619Z,1513231407.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:27.651Z,1513231407.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:28.055Z,1513231408.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:28.111Z,1513231408.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:28.393Z,1513231408.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:28.442Z,1513231408.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:28.835Z,1513231408.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:28.863Z,1513231408.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:29.216Z,1513231409.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:29.256Z,1513231409.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:29.630Z,1513231409.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:29.652Z,1513231409.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:29.988Z,1513231409.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:30.039Z,1513231410.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:30.391Z,1513231410.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:30.405Z,1513231410.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:30.808Z,1513231410.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:30.833Z,1513231410.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:31.226Z,1513231411.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:31.254Z,1513231411.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:31.609Z,1513231411.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:31.641Z,1513231411.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:31.998Z,1513231411.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:32.046Z,1513231412.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:32.395Z,1513231412.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:32.436Z,1513231412.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:32.811Z,1513231412.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:32.840Z,1513231412.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:33.209Z,1513231413.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:33.240Z,1513231413.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:33.609Z,1513231413.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:33.642Z,1513231413.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:34.024Z,1513231414.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:34.038Z,1513231414.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:34.410Z,1513231414.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:34.495Z,1513231414.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:34.804Z,1513231414.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:34.871Z,1513231414.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:35.214Z,1513231415.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:35.243Z,1513231415.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:35.614Z,1513231415.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:35.637Z,1513231415.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:36.002Z,1513231416.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:36.055Z,1513231416.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:36.393Z,1513231416.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:36.442Z,1513231416.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:36.811Z,1513231416.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:36.881Z,1513231416.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:37.231Z,1513231417.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:37.245Z,1513231417.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:37.609Z,1513231417.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:37.636Z,1513231417.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:38.003Z,1513231418.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:38.055Z,1513231418.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:38.403Z,1513231418.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:38.447Z,1513231418.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:38.798Z,1513231418.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:38.820Z,1513231418.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:39.205Z,1513231419.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:39.220Z,1513231419.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:39.610Z,1513231419.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:39.651Z,1513231419.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:39.997Z,1513231419.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:40.015Z,1513231420.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:40.397Z,1513231420.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:40.419Z,1513231420.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:40.814Z,1513231420.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:40.856Z,1513231420.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:41.248Z,1513231421.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:41.290Z,1513231421.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:41.602Z,1513231421.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:41.642Z,1513231421.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:41.994Z,1513231421.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:42.023Z,1513231422.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:42.398Z,1513231422.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:42.414Z,1513231422.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:42.798Z,1513231422.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:42.840Z,1513231422.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:43.201Z,1513231423.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:43.223Z,1513231423.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:43.605Z,1513231423.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:43.623Z,1513231423.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:44.003Z,1513231424.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:44.020Z,1513231424.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:44.428Z,1513231424.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:44.469Z,1513231424.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:44.804Z,1513231424.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:44.840Z,1513231424.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:45.223Z,1513231425.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:45.238Z,1513231425.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T06:03:45.298Z,1513231425.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:45.607Z,1513231425.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:45.622Z,1513231425.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:46.000Z,1513231426.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:46.043Z,1513231426.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:46.400Z,1513231426.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:46.422Z,1513231426.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:46.867Z,1513231426.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:46.994Z,1513231426.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:47.215Z,1513231427.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:47.230Z,1513231427.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:47.643Z,1513231427.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:47.679Z,1513231427.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:47.987Z,1513231427.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:48.043Z,1513231428.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:48.395Z,1513231428.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:48.436Z,1513231428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:48.799Z,1513231428.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:48.831Z,1513231428.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:49.194Z,1513231429.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:49.234Z,1513231429.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:49.591Z,1513231429.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:49.606Z,1513231429.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:50.014Z,1513231430.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:50.037Z,1513231430.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:50.410Z,1513231430.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:50.439Z,1513231430.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:50.834Z,1513231430.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:50.863Z,1513231430.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:51.199Z,1513231431.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:51.243Z,1513231431.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:51.592Z,1513231431.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:51.624Z,1513231431.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:52.042Z,1513231432.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:52.056Z,1513231432.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:52.398Z,1513231432.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:52.447Z,1513231432.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:52.800Z,1513231432.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:52.854Z,1513231432.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:53.205Z,1513231433.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:53.224Z,1513231433.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:53.608Z,1513231433.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:53.643Z,1513231433.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:53.643Z,1513231433.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2017-12-14T06:03:53.643Z,1513231433.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:03:53.649Z,1513231433.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:53.649Z,1513231433.649 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111
2017-12-14T06:03:53.649Z,1513231433.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:03:53.651Z,1513231433.651 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:53.651Z,1513231433.651 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2017-12-14T06:03:53.651Z,1513231433.651 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:03:53.676Z,1513231433.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:03:53.676Z,1513231433.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:03:53.676Z,1513231433.676 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:03:54.043Z,1513231434.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:54.118Z,1513231434.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:03:54.118Z,1513231434.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2017-12-14T06:03:54.119Z,1513231434.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:03:54.119Z,1513231434.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111
2017-12-14T06:03:54.119Z,1513231434.119 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:03:54.119Z,1513231434.119 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2017-12-14T06:03:54.403Z,1513231434.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:54.445Z,1513231434.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:03:54.446Z,1513231434.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:03:54.446Z,1513231434.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:03:54.446Z,1513231434.446 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:03:54.447Z,1513231434.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:03:54.447Z,1513231434.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:03:54.447Z,1513231434.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:03:54.448Z,1513231434.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:03:54.448Z,1513231434.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:03:54.822Z,1513231434.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:54.829Z,1513231434.829 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T06:03:54.853Z,1513231434.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:58.214Z,1513231438.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:58.380Z,1513231438.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:58.494Z,1513231438.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:58.519Z,1513231438.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:58.880Z,1513231438.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:58.992Z,1513231438.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:59.286Z,1513231439.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:59.307Z,1513231439.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:03:59.646Z,1513231439.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:03:59.701Z,1513231439.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:00.053Z,1513231440.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:00.068Z,1513231440.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:00.484Z,1513231440.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:00.515Z,1513231440.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:00.870Z,1513231440.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:00.896Z,1513231440.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:01.273Z,1513231441.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:01.307Z,1513231441.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:01.671Z,1513231441.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:01.706Z,1513231441.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:02.056Z,1513231442.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:02.080Z,1513231442.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:02.458Z,1513231442.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:02.474Z,1513231442.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:02.860Z,1513231442.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:02.886Z,1513231442.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:03.258Z,1513231443.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:03.281Z,1513231443.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:03.668Z,1513231443.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:03.683Z,1513231443.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:04.066Z,1513231444.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:04.107Z,1513231444.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:04.462Z,1513231444.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:04.495Z,1513231444.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:04.860Z,1513231444.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:04.875Z,1513231444.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:05.266Z,1513231445.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:05.280Z,1513231445.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:05.653Z,1513231445.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:05.672Z,1513231445.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:06.060Z,1513231446.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:06.078Z,1513231446.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:06.461Z,1513231446.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:06.475Z,1513231446.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:06.878Z,1513231446.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:06.903Z,1513231446.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:07.273Z,1513231447.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:07.304Z,1513231447.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:07.672Z,1513231447.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:07.721Z,1513231447.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:08.063Z,1513231448.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:08.079Z,1513231448.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:08.461Z,1513231448.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:08.476Z,1513231448.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:08.860Z,1513231448.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:08.883Z,1513231448.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:09.258Z,1513231449.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:09.273Z,1513231449.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:09.662Z,1513231449.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:09.677Z,1513231449.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:10.118Z,1513231450.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:10.157Z,1513231450.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:10.462Z,1513231450.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:10.477Z,1513231450.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:10.859Z,1513231450.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:10.879Z,1513231450.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:11.258Z,1513231451.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:11.274Z,1513231451.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:11.658Z,1513231451.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:11.674Z,1513231451.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:12.058Z,1513231452.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:12.078Z,1513231452.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:12.461Z,1513231452.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:12.475Z,1513231452.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:12.862Z,1513231452.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:12.877Z,1513231452.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:13.297Z,1513231453.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:13.329Z,1513231453.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:13.671Z,1513231453.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:13.691Z,1513231453.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:14.063Z,1513231454.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:14.078Z,1513231454.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:14.451Z,1513231454.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:14.482Z,1513231454.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:14.879Z,1513231454.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:14.899Z,1513231454.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:15.252Z,1513231455.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:15.291Z,1513231455.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:15.666Z,1513231455.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:15.762Z,1513231455.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:16.065Z,1513231456.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:16.099Z,1513231456.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:16.190Z,1513231456.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:16.483Z,1513231456.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:16.508Z,1513231456.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:16.877Z,1513231456.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:16.902Z,1513231456.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:16.985Z,1513231456.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:17.264Z,1513231457.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:17.278Z,1513231457.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:17.389Z,1513231457.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:17.656Z,1513231457.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:17.675Z,1513231457.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:18.061Z,1513231458.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:18.076Z,1513231458.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:18.188Z,1513231458.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:18.460Z,1513231458.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:18.475Z,1513231458.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:18.874Z,1513231458.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:18.904Z,1513231458.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:18.986Z,1513231458.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:19.277Z,1513231459.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:19.303Z,1513231459.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:19.389Z,1513231459.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:19.677Z,1513231459.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:19.783Z,1513231459.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:20.056Z,1513231460.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:20.072Z,1513231460.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:20.189Z,1513231460.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:20.458Z,1513231460.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:20.473Z,1513231460.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:20.862Z,1513231460.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:20.902Z,1513231460.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:20.987Z,1513231460.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:21.263Z,1513231461.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:21.278Z,1513231461.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:21.393Z,1513231461.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:21.673Z,1513231461.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:21.719Z,1513231461.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:22.070Z,1513231462.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:22.106Z,1513231462.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:22.189Z,1513231462.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:22.462Z,1513231462.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:22.476Z,1513231462.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:22.861Z,1513231462.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:22.876Z,1513231462.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:22.987Z,1513231462.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:23.261Z,1513231463.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:23.275Z,1513231463.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:23.393Z,1513231463.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:23.655Z,1513231463.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:23.670Z,1513231463.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:24.060Z,1513231464.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:24.074Z,1513231464.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:24.464Z,1513231464.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:24.478Z,1513231464.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:24.874Z,1513231464.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:24.904Z,1513231464.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:25.270Z,1513231465.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:25.284Z,1513231465.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:25.673Z,1513231465.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:25.706Z,1513231465.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:26.060Z,1513231466.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:26.075Z,1513231466.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:26.471Z,1513231466.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:26.491Z,1513231466.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:26.865Z,1513231466.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:26.879Z,1513231466.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:27.251Z,1513231467.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:27.267Z,1513231467.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:27.678Z,1513231467.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:27.694Z,1513231467.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:28.065Z,1513231468.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:28.094Z,1513231468.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:28.462Z,1513231468.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:28.492Z,1513231468.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:28.860Z,1513231468.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:28.875Z,1513231468.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:29.337Z,1513231469.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:29.377Z,1513231469.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:29.645Z,1513231469.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:29.668Z,1513231469.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:30.056Z,1513231470.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:30.122Z,1513231470.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:30.189Z,1513231470.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:30.448Z,1513231470.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:30.471Z,1513231470.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:30.879Z,1513231470.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:30.894Z,1513231470.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:30.985Z,1513231470.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:31.270Z,1513231471.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:31.293Z,1513231471.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:31.389Z,1513231471.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:31.665Z,1513231471.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:31.699Z,1513231471.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:32.051Z,1513231472.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:32.088Z,1513231472.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:32.186Z,1513231472.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:32.503Z,1513231472.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:32.526Z,1513231472.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:32.858Z,1513231472.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:32.883Z,1513231472.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:32.981Z,1513231472.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:33.267Z,1513231473.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:33.283Z,1513231473.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:33.385Z,1513231473.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:33.674Z,1513231473.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:33.691Z,1513231473.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:34.073Z,1513231474.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:34.088Z,1513231474.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:34.182Z,1513231474.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:34.468Z,1513231474.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:34.484Z,1513231474.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:34.862Z,1513231474.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:34.883Z,1513231474.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:34.978Z,1513231474.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:35.262Z,1513231475.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:35.279Z,1513231475.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:35.381Z,1513231475.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:35.659Z,1513231475.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:35.686Z,1513231475.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:36.064Z,1513231476.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:36.079Z,1513231476.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:36.178Z,1513231476.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:36.452Z,1513231476.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:36.489Z,1513231476.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:36.872Z,1513231476.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:36.888Z,1513231476.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:36.973Z,1513231476.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:37.278Z,1513231477.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:37.293Z,1513231477.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:37.378Z,1513231477.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:37.680Z,1513231477.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:37.694Z,1513231477.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:38.066Z,1513231478.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:38.081Z,1513231478.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:38.452Z,1513231478.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:38.484Z,1513231478.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:38.918Z,1513231478.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:38.945Z,1513231478.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:39.251Z,1513231479.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:39.278Z,1513231479.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:39.665Z,1513231479.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:39.696Z,1513231479.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:40.080Z,1513231480.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:40.103Z,1513231480.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:40.475Z,1513231480.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:40.491Z,1513231480.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:40.852Z,1513231480.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:40.879Z,1513231480.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:41.256Z,1513231481.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:41.272Z,1513231481.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:41.659Z,1513231481.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:41.700Z,1513231481.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:42.103Z,1513231482.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:42.163Z,1513231482.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:42.178Z,1513231482.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:42.457Z,1513231482.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:42.471Z,1513231482.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:42.873Z,1513231482.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:42.975Z,1513231482.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:42.979Z,1513231482.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:43.267Z,1513231483.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:43.295Z,1513231483.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:43.397Z,1513231483.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:43.674Z,1513231483.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:43.718Z,1513231483.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:44.063Z,1513231484.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:44.084Z,1513231484.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:44.194Z,1513231484.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:44.459Z,1513231484.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:44.479Z,1513231484.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:44.862Z,1513231484.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:44.883Z,1513231484.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:44.989Z,1513231484.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:45.266Z,1513231485.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:45.309Z,1513231485.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:45.393Z,1513231485.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:45.670Z,1513231485.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:45.691Z,1513231485.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:46.076Z,1513231486.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:46.092Z,1513231486.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:46.190Z,1513231486.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:46.470Z,1513231486.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:46.484Z,1513231486.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:46.865Z,1513231486.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:46.887Z,1513231486.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:46.986Z,1513231486.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:47.270Z,1513231487.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:47.285Z,1513231487.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:47.389Z,1513231487.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:47.652Z,1513231487.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:47.683Z,1513231487.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:48.056Z,1513231488.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:48.083Z,1513231488.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:48.186Z,1513231488.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:48.475Z,1513231488.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:48.510Z,1513231488.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:48.862Z,1513231488.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:48.882Z,1513231488.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:48.981Z,1513231488.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:49.266Z,1513231489.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:49.300Z,1513231489.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:49.386Z,1513231489.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:49.665Z,1513231489.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:49.693Z,1513231489.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:50.060Z,1513231490.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:50.096Z,1513231490.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:50.182Z,1513231490.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:50.459Z,1513231490.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:50.496Z,1513231490.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:50.860Z,1513231490.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:50.884Z,1513231490.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:50.977Z,1513231490.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:51.251Z,1513231491.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:51.287Z,1513231491.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:51.381Z,1513231491.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:51.669Z,1513231491.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:51.703Z,1513231491.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:52.079Z,1513231492.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:52.120Z,1513231492.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:52.177Z,1513231492.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:52.463Z,1513231492.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:52.490Z,1513231492.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:52.855Z,1513231492.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:52.876Z,1513231492.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:52.973Z,1513231492.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:53.260Z,1513231493.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:53.275Z,1513231493.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:53.377Z,1513231493.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:53.659Z,1513231493.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:53.679Z,1513231493.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:54.060Z,1513231494.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:54.074Z,1513231494.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:54.461Z,1513231494.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:54.475Z,1513231494.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:54.876Z,1513231494.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:54.912Z,1513231494.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:56.208Z,1513231496.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:57.002Z,1513231497.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:57.405Z,1513231497.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:58.202Z,1513231498.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:58.321Z,1513231498.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:58.336Z,1513231498.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:58.450Z,1513231498.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:58.483Z,1513231498.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:58.788Z,1513231498.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:58.818Z,1513231498.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:58.997Z,1513231498.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:59.200Z,1513231499.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:59.227Z,1513231499.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:59.401Z,1513231499.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:59.583Z,1513231499.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:04:59.634Z,1513231499.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:04:59.988Z,1513231499.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:00.035Z,1513231500.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:00.198Z,1513231500.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:00.386Z,1513231500.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:00.421Z,1513231500.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:00.816Z,1513231500.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:00.831Z,1513231500.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:00.993Z,1513231500.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:01.202Z,1513231501.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:01.235Z,1513231501.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:01.398Z,1513231501.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:01.602Z,1513231501.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:01.636Z,1513231501.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:01.990Z,1513231501.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:02.034Z,1513231502.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:02.194Z,1513231502.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:02.390Z,1513231502.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:02.427Z,1513231502.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:02.795Z,1513231502.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:02.857Z,1513231502.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:02.989Z,1513231502.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:03.196Z,1513231503.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:03.239Z,1513231503.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:03.393Z,1513231503.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:03.611Z,1513231503.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:03.683Z,1513231503.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:04.010Z,1513231504.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:04.059Z,1513231504.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:04.189Z,1513231504.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:04.410Z,1513231504.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:04.448Z,1513231504.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:04.793Z,1513231504.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:04.843Z,1513231504.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:04.985Z,1513231504.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:05.198Z,1513231505.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:05.220Z,1513231505.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:05.389Z,1513231505.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:05.597Z,1513231505.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:05.650Z,1513231505.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:05.993Z,1513231505.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:06.020Z,1513231506.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:06.185Z,1513231506.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:06.396Z,1513231506.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:06.420Z,1513231506.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:06.799Z,1513231506.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:06.821Z,1513231506.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:06.981Z,1513231506.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:07.217Z,1513231507.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:07.241Z,1513231507.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:07.385Z,1513231507.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:07.619Z,1513231507.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:07.665Z,1513231507.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:07.984Z,1513231507.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:08.031Z,1513231508.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:08.182Z,1513231508.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:08.383Z,1513231508.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:08.419Z,1513231508.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:08.784Z,1513231508.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:08.820Z,1513231508.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:08.979Z,1513231508.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:09.184Z,1513231509.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:09.234Z,1513231509.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:09.385Z,1513231509.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:09.608Z,1513231509.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:09.630Z,1513231509.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:10.016Z,1513231510.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:10.032Z,1513231510.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:10.182Z,1513231510.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:10.406Z,1513231510.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:10.443Z,1513231510.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:10.787Z,1513231510.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:10.815Z,1513231510.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:10.979Z,1513231510.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:11.188Z,1513231511.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:11.239Z,1513231511.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:11.389Z,1513231511.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:11.591Z,1513231511.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:11.634Z,1513231511.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:11.992Z,1513231511.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:12.028Z,1513231512.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:12.185Z,1513231512.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:12.384Z,1513231512.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:12.408Z,1513231512.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:12.795Z,1513231512.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:12.830Z,1513231512.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:12.981Z,1513231512.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:13.211Z,1513231513.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:13.239Z,1513231513.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:13.385Z,1513231513.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:13.604Z,1513231513.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:13.628Z,1513231513.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:13.990Z,1513231513.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:14.086Z,1513231514.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:14.182Z,1513231514.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:14.403Z,1513231514.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:14.441Z,1513231514.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:14.792Z,1513231514.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:14.814Z,1513231514.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:14.977Z,1513231514.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:15.192Z,1513231515.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:15.214Z,1513231515.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:15.381Z,1513231515.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:15.595Z,1513231515.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:15.638Z,1513231515.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:16.005Z,1513231516.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:16.039Z,1513231516.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:16.178Z,1513231516.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:16.410Z,1513231516.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:16.440Z,1513231516.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:16.793Z,1513231516.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:16.819Z,1513231516.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:16.973Z,1513231516.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:17.190Z,1513231517.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:17.238Z,1513231517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:17.378Z,1513231517.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:17.591Z,1513231517.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:17.606Z,1513231517.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:17.993Z,1513231517.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:18.014Z,1513231518.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:18.173Z,1513231518.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:18.387Z,1513231518.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:18.410Z,1513231518.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:18.794Z,1513231518.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:18.839Z,1513231518.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:18.972Z,1513231518.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:19.197Z,1513231519.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:19.220Z,1513231519.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:19.377Z,1513231519.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:19.601Z,1513231519.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:19.641Z,1513231519.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:19.996Z,1513231519.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:20.015Z,1513231520.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:20.175Z,1513231520.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:20.415Z,1513231520.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:20.487Z,1513231520.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:20.795Z,1513231520.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:20.839Z,1513231520.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:20.969Z,1513231520.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:21.194Z,1513231521.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:21.216Z,1513231521.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:21.373Z,1513231521.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:21.608Z,1513231521.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:21.623Z,1513231521.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:22.004Z,1513231522.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:22.042Z,1513231522.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:22.170Z,1513231522.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:22.396Z,1513231522.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:22.433Z,1513231522.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:22.795Z,1513231522.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:22.819Z,1513231522.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:22.967Z,1513231522.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:23.191Z,1513231523.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:23.217Z,1513231523.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:23.385Z,1513231523.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:23.603Z,1513231523.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:23.652Z,1513231523.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:23.000Z,1513231524.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:24.022Z,1513231524.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:24.185Z,1513231524.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:24.398Z,1513231524.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:24.420Z,1513231524.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:24.811Z,1513231524.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:24.831Z,1513231524.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:24.990Z,1513231524.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:25.205Z,1513231525.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:25.246Z,1513231525.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:25.393Z,1513231525.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:25.605Z,1513231525.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:25.676Z,1513231525.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:25.994Z,1513231525.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:26.016Z,1513231526.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:26.190Z,1513231526.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:26.404Z,1513231526.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:26.448Z,1513231526.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:26.784Z,1513231526.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:26.882Z,1513231526.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:26.986Z,1513231526.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:27.183Z,1513231527.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:27.210Z,1513231527.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:27.389Z,1513231527.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:27.610Z,1513231527.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:27.663Z,1513231527.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:28.018Z,1513231528.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:28.032Z,1513231528.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:28.185Z,1513231528.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:28.406Z,1513231528.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:28.463Z,1513231528.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:28.783Z,1513231528.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:28.824Z,1513231528.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:28.981Z,1513231528.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:29.187Z,1513231529.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:29.220Z,1513231529.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:29.385Z,1513231529.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:29.587Z,1513231529.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:29.630Z,1513231529.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:30.030Z,1513231530.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:30.066Z,1513231530.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:30.182Z,1513231530.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:30.383Z,1513231530.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:30.409Z,1513231530.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:30.816Z,1513231530.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:30.831Z,1513231530.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:30.977Z,1513231530.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:31.220Z,1513231531.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:31.238Z,1513231531.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:31.381Z,1513231531.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:31.609Z,1513231531.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:31.636Z,1513231531.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:31.983Z,1513231531.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:32.008Z,1513231532.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:32.178Z,1513231532.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:32.383Z,1513231532.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:32.428Z,1513231532.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:32.800Z,1513231532.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:32.827Z,1513231532.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:32.973Z,1513231532.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:33.203Z,1513231533.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:33.247Z,1513231533.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:33.377Z,1513231533.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:33.602Z,1513231533.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:33.639Z,1513231533.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:34.004Z,1513231534.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:34.030Z,1513231534.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:34.173Z,1513231534.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:34.412Z,1513231534.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:34.435Z,1513231534.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:34.799Z,1513231534.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:34.840Z,1513231534.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:34.969Z,1513231534.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:35.189Z,1513231535.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:35.203Z,1513231535.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:35.373Z,1513231535.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:35.587Z,1513231535.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:35.628Z,1513231535.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:36.005Z,1513231536.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:36.020Z,1513231536.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:36.169Z,1513231536.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:36.411Z,1513231536.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:36.438Z,1513231536.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:36.798Z,1513231536.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:36.847Z,1513231536.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:36.967Z,1513231536.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:37.218Z,1513231537.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:37.247Z,1513231537.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:37.381Z,1513231537.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:37.603Z,1513231537.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:37.617Z,1513231537.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:37.996Z,1513231537.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:38.039Z,1513231538.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:38.178Z,1513231538.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:38.396Z,1513231538.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:38.419Z,1513231538.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:38.798Z,1513231538.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:38.820Z,1513231538.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:38.979Z,1513231538.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:39.186Z,1513231539.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:39.223Z,1513231539.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:39.393Z,1513231539.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:39.652Z,1513231539.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:39.672Z,1513231539.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:40.008Z,1513231540.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:40.029Z,1513231540.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:40.189Z,1513231540.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:40.410Z,1513231540.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:40.425Z,1513231540.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:40.783Z,1513231540.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:40.827Z,1513231540.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:40.985Z,1513231540.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:41.183Z,1513231541.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:41.217Z,1513231541.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:41.389Z,1513231541.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:41.587Z,1513231541.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:41.622Z,1513231541.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:41.984Z,1513231541.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:42.015Z,1513231542.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:42.185Z,1513231542.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:42.383Z,1513231542.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:42.423Z,1513231542.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:42.866Z,1513231542.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:42.894Z,1513231542.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:42.982Z,1513231542.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:43.202Z,1513231543.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:43.243Z,1513231543.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:43.385Z,1513231543.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:43.607Z,1513231543.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:43.633Z,1513231543.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:43.989Z,1513231543.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:44.028Z,1513231544.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:44.182Z,1513231544.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:44.394Z,1513231544.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:44.446Z,1513231544.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:44.794Z,1513231544.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:44.837Z,1513231544.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:44.977Z,1513231544.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:45.194Z,1513231545.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:45.237Z,1513231545.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:45.381Z,1513231545.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:45.600Z,1513231545.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:45.615Z,1513231545.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:46.047Z,1513231546.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:46.053Z,1513231546.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x50459 got:0x36831
2017-12-14T06:05:46.095Z,1513231546.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:46.178Z,1513231546.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:46.397Z,1513231546.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:46.438Z,1513231546.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:46.792Z,1513231546.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:46.815Z,1513231546.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:46.973Z,1513231546.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:47.207Z,1513231547.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:47.245Z,1513231547.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:47.377Z,1513231547.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:47.595Z,1513231547.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:47.643Z,1513231547.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:47.996Z,1513231547.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:48.024Z,1513231548.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:48.174Z,1513231548.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:48.397Z,1513231548.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:48.419Z,1513231548.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:48.806Z,1513231548.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:48.871Z,1513231548.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:48.969Z,1513231548.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:49.245Z,1513231549.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:49.276Z,1513231549.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:49.374Z,1513231549.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:49.608Z,1513231549.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:49.656Z,1513231549.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:49.987Z,1513231549.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:50.022Z,1513231550.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:50.170Z,1513231550.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:50.383Z,1513231550.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:50.450Z,1513231550.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:50.788Z,1513231550.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:50.835Z,1513231550.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:50.967Z,1513231550.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:51.183Z,1513231551.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:51.222Z,1513231551.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:51.377Z,1513231551.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:51.608Z,1513231551.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:51.632Z,1513231551.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:52.018Z,1513231552.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:52.033Z,1513231552.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:52.173Z,1513231552.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:52.389Z,1513231552.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:52.465Z,1513231552.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:52.783Z,1513231552.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:52.840Z,1513231552.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:52.971Z,1513231552.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:53.183Z,1513231553.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:53.226Z,1513231553.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:53.381Z,1513231553.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:53.578Z,1513231553.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:53.604Z,1513231553.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:53.985Z,1513231553.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:54.030Z,1513231554.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:54.177Z,1513231554.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:54.391Z,1513231554.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:54.435Z,1513231554.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:54.816Z,1513231554.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:54.835Z,1513231554.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:54.973Z,1513231554.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:55.214Z,1513231555.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:55.230Z,1513231555.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:55.377Z,1513231555.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:56.174Z,1513231556.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:56.969Z,1513231556.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:57.373Z,1513231557.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:58.169Z,1513231558.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:58.667Z,1513231558.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:58.714Z,1513231558.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:58.851Z,1513231558.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:58.879Z,1513231558.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:58.966Z,1513231558.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:59.167Z,1513231559.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:59.207Z,1513231559.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:59.369Z,1513231559.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:59.611Z,1513231559.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:05:59.626Z,1513231559.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:05:59.965Z,1513231559.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:00.011Z,1513231560.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:00.166Z,1513231560.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:00.363Z,1513231560.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:00.377Z,1513231560.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:00.780Z,1513231560.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:00.800Z,1513231560.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:00.961Z,1513231560.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:01.181Z,1513231561.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:01.219Z,1513231561.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:01.365Z,1513231561.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:01.579Z,1513231561.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:01.612Z,1513231561.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:01.971Z,1513231561.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:01.986Z,1513231561.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:02.162Z,1513231562.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:02.373Z,1513231562.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:02.388Z,1513231562.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:02.774Z,1513231562.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:02.789Z,1513231562.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:02.957Z,1513231562.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:03.177Z,1513231563.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:03.197Z,1513231563.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:03.361Z,1513231563.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:03.582Z,1513231563.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:03.596Z,1513231563.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:04.039Z,1513231564.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:04.106Z,1513231564.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:04.173Z,1513231564.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:04.378Z,1513231564.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:04.418Z,1513231564.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:04.772Z,1513231564.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:04.787Z,1513231564.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:04.971Z,1513231564.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:05.222Z,1513231565.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:05.252Z,1513231565.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:05.389Z,1513231565.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:05.587Z,1513231565.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:05.628Z,1513231565.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:05.986Z,1513231565.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:06.007Z,1513231566.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:06.186Z,1513231566.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:06.383Z,1513231566.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:06.419Z,1513231566.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:06.764Z,1513231566.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:06.802Z,1513231566.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:06.983Z,1513231566.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:07.175Z,1513231567.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:07.193Z,1513231567.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:07.393Z,1513231567.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:07.586Z,1513231567.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:07.610Z,1513231567.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:07.987Z,1513231567.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:08.009Z,1513231568.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:08.189Z,1513231568.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:08.395Z,1513231568.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:08.450Z,1513231568.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:08.767Z,1513231568.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:08.794Z,1513231568.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:08.985Z,1513231568.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:09.167Z,1513231569.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:09.211Z,1513231569.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:09.389Z,1513231569.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:09.564Z,1513231569.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:09.594Z,1513231569.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:09.968Z,1513231569.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:09.996Z,1513231569.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:10.185Z,1513231570.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:10.364Z,1513231570.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:10.396Z,1513231570.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:10.790Z,1513231570.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:10.847Z,1513231570.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:10.981Z,1513231570.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:11.192Z,1513231571.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:11.244Z,1513231571.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:11.385Z,1513231571.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:11.608Z,1513231571.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:11.670Z,1513231571.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:11.964Z,1513231571.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:11.995Z,1513231571.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:12.182Z,1513231572.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:12.364Z,1513231572.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:12.414Z,1513231572.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:12.769Z,1513231572.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:12.807Z,1513231572.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:12.977Z,1513231572.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:13.164Z,1513231573.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:13.211Z,1513231573.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:13.381Z,1513231573.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:13.586Z,1513231573.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:13.600Z,1513231573.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:13.986Z,1513231573.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:14.004Z,1513231574.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:14.177Z,1513231574.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:14.387Z,1513231574.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:14.410Z,1513231574.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:14.807Z,1513231574.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:14.851Z,1513231574.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:14.976Z,1513231574.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:15.164Z,1513231575.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:15.202Z,1513231575.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:15.381Z,1513231575.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:15.587Z,1513231575.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:15.613Z,1513231575.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:15.983Z,1513231575.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:16.017Z,1513231576.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:16.177Z,1513231576.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:16.377Z,1513231576.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:16.415Z,1513231576.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:16.768Z,1513231576.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:16.799Z,1513231576.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:16.973Z,1513231576.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:17.169Z,1513231577.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:17.196Z,1513231577.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:17.377Z,1513231577.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:17.578Z,1513231577.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:17.599Z,1513231577.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:17.990Z,1513231577.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:18.032Z,1513231578.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:18.174Z,1513231578.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:18.386Z,1513231578.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:18.400Z,1513231578.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:18.775Z,1513231578.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:18.789Z,1513231578.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:18.971Z,1513231578.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:19.178Z,1513231579.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:19.200Z,1513231579.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:19.381Z,1513231579.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:19.569Z,1513231579.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:19.593Z,1513231579.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:19.976Z,1513231579.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:20.005Z,1513231580.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:20.178Z,1513231580.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:20.375Z,1513231580.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:20.391Z,1513231580.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:20.814Z,1513231580.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:20.847Z,1513231580.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:20.975Z,1513231580.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:21.196Z,1513231581.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:21.267Z,1513231581.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:21.393Z,1513231581.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:21.583Z,1513231581.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:21.607Z,1513231581.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:21.987Z,1513231581.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:22.044Z,1513231582.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:22.195Z,1513231582.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:22.369Z,1513231582.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:22.434Z,1513231582.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:22.770Z,1513231582.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:22.803Z,1513231582.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:22.990Z,1513231582.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:23.193Z,1513231583.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:23.254Z,1513231583.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:23.394Z,1513231583.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:23.595Z,1513231583.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:23.653Z,1513231583.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:23.995Z,1513231583.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:24.051Z,1513231584.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:24.190Z,1513231584.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:24.380Z,1513231584.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:24.450Z,1513231584.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:24.778Z,1513231584.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:24.829Z,1513231584.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:24.986Z,1513231584.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:25.183Z,1513231585.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:25.231Z,1513231585.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:25.390Z,1513231585.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:25.588Z,1513231585.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:25.626Z,1513231585.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:25.987Z,1513231585.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:26.065Z,1513231586.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:26.186Z,1513231586.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:26.399Z,1513231586.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:26.434Z,1513231586.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:26.773Z,1513231586.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:26.907Z,1513231586.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:26.982Z,1513231586.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:27.174Z,1513231587.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:27.205Z,1513231587.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:27.385Z,1513231587.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:27.583Z,1513231587.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:27.610Z,1513231587.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:28.015Z,1513231588.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:28.096Z,1513231588.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:28.181Z,1513231588.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:28.364Z,1513231588.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:28.428Z,1513231588.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:28.791Z,1513231588.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:28.812Z,1513231588.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:28.977Z,1513231588.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:29.191Z,1513231589.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:29.247Z,1513231589.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:29.382Z,1513231589.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:29.595Z,1513231589.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:29.635Z,1513231589.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:29.964Z,1513231589.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:29.993Z,1513231589.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:30.178Z,1513231590.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:30.387Z,1513231590.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:30.410Z,1513231590.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:30.766Z,1513231590.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:30.837Z,1513231590.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:30.974Z,1513231590.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:31.185Z,1513231591.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:31.200Z,1513231591.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:31.378Z,1513231591.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:31.621Z,1513231591.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:31.658Z,1513231591.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:32.017Z,1513231592.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:32.077Z,1513231592.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:32.174Z,1513231592.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:32.384Z,1513231592.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:32.430Z,1513231592.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:32.796Z,1513231592.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:32.851Z,1513231592.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:32.971Z,1513231592.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:33.172Z,1513231593.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:33.259Z,1513231593.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:33.393Z,1513231593.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:33.580Z,1513231593.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:33.683Z,1513231593.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:34.005Z,1513231594.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:34.055Z,1513231594.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:34.191Z,1513231594.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:34.383Z,1513231594.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:34.438Z,1513231594.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T06:06:34.506Z,1513231594.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:34.816Z,1513231594.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:34.873Z,1513231594.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:34.987Z,1513231594.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:35.175Z,1513231595.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:35.272Z,1513231595.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:35.412Z,1513231595.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:35.589Z,1513231595.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:35.654Z,1513231595.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:35.987Z,1513231595.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:36.040Z,1513231596.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:36.206Z,1513231596.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:36.388Z,1513231596.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:36.435Z,1513231596.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:36.777Z,1513231596.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:36.809Z,1513231596.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:37.002Z,1513231597.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:37.181Z,1513231597.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:37.204Z,1513231597.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:37.406Z,1513231597.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:37.588Z,1513231597.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:37.639Z,1513231597.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:37.970Z,1513231597.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:38.016Z,1513231598.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:38.202Z,1513231598.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:38.373Z,1513231598.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:38.422Z,1513231598.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:38.784Z,1513231598.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:38.804Z,1513231598.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:38.997Z,1513231598.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:39.200Z,1513231599.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:39.246Z,1513231599.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:39.401Z,1513231599.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:39.584Z,1513231599.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:39.631Z,1513231599.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:39.978Z,1513231599.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:40.007Z,1513231600.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:40.198Z,1513231600.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:40.381Z,1513231600.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:40.395Z,1513231600.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:40.779Z,1513231600.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:40.803Z,1513231600.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:40.994Z,1513231600.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:41.168Z,1513231601.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:41.237Z,1513231601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:41.398Z,1513231601.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:41.618Z,1513231601.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:41.658Z,1513231601.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:41.982Z,1513231601.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:42.031Z,1513231602.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:42.194Z,1513231602.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:42.377Z,1513231602.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:42.407Z,1513231602.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:42.814Z,1513231602.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:42.830Z,1513231602.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:42.989Z,1513231602.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:43.172Z,1513231603.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:43.211Z,1513231603.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:43.393Z,1513231603.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:43.579Z,1513231603.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:43.635Z,1513231603.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:43.977Z,1513231603.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:43.993Z,1513231603.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:44.190Z,1513231604.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:44.382Z,1513231604.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:44.396Z,1513231604.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:44.783Z,1513231604.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:44.805Z,1513231604.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:44.985Z,1513231604.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:45.174Z,1513231605.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:45.197Z,1513231605.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:45.389Z,1513231605.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:45.586Z,1513231605.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:45.607Z,1513231605.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:45.988Z,1513231605.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:46.013Z,1513231606.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:46.185Z,1513231606.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:46.387Z,1513231606.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:46.409Z,1513231606.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:46.764Z,1513231606.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:46.807Z,1513231606.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:46.983Z,1513231606.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:47.176Z,1513231607.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:47.195Z,1513231607.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:47.389Z,1513231607.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:47.591Z,1513231607.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:47.612Z,1513231607.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:47.978Z,1513231607.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:48.023Z,1513231608.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:48.186Z,1513231608.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:48.382Z,1513231608.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:48.408Z,1513231608.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:48.770Z,1513231608.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:48.786Z,1513231608.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:48.986Z,1513231608.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:49.172Z,1513231609.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:49.212Z,1513231609.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:49.393Z,1513231609.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:49.582Z,1513231609.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:49.614Z,1513231609.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:49.977Z,1513231609.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:49.992Z,1513231609.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:50.189Z,1513231610.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:50.411Z,1513231610.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:50.436Z,1513231610.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:50.778Z,1513231610.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:50.820Z,1513231610.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:50.985Z,1513231610.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:51.175Z,1513231611.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:51.201Z,1513231611.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:51.389Z,1513231611.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:51.572Z,1513231611.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:51.587Z,1513231611.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:51.968Z,1513231611.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:51.991Z,1513231611.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:52.185Z,1513231612.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:52.374Z,1513231612.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:52.389Z,1513231612.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:52.787Z,1513231612.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:52.826Z,1513231612.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:52.981Z,1513231612.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:53.187Z,1513231613.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:53.231Z,1513231613.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:53.385Z,1513231613.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:53.607Z,1513231613.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:53.648Z,1513231613.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:53.967Z,1513231613.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:54.014Z,1513231614.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:54.182Z,1513231614.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:54.364Z,1513231614.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:54.407Z,1513231614.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:54.414Z,1513231614.414 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:06:54.414Z,1513231614.414 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:06:54.414Z,1513231614.414 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:06:54.414Z,1513231614.414 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:06:54.776Z,1513231614.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:54.804Z,1513231614.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:54.804Z,1513231614.804 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2017-12-14T06:06:54.805Z,1513231614.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:06:54.806Z,1513231614.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:54.806Z,1513231614.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112
2017-12-14T06:06:54.807Z,1513231614.807 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:06:54.808Z,1513231614.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:54.808Z,1513231614.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2017-12-14T06:06:54.809Z,1513231614.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:06:54.810Z,1513231614.810 [Default:CheckIn:D] Stopped
2017-12-14T06:06:54.811Z,1513231614.811 [Default:CheckIn:E] Running Loop=1
2017-12-14T06:06:54.822Z,1513231614.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:06:54.823Z,1513231614.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:06:54.823Z,1513231614.823 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:06:54.977Z,1513231614.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:55.165Z,1513231615.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:55.231Z,1513231615.231 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 333.656999 min 
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn:E] Stopped
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn] Stopped
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn](INFO): Running loop #33
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn] Running Loop=33
2017-12-14T06:06:55.232Z,1513231615.232 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T06:06:55.237Z,1513231615.237 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T06:06:55.255Z,1513231615.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:06:55.255Z,1513231615.255 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2017-12-14T06:06:55.255Z,1513231615.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:06:55.256Z,1513231615.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112
2017-12-14T06:06:55.256Z,1513231615.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:06:55.256Z,1513231615.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2017-12-14T06:06:55.381Z,1513231615.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:55.592Z,1513231615.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:55.613Z,1513231615.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:06:55.614Z,1513231615.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:06:55.614Z,1513231615.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:06:55.614Z,1513231615.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:06:55.615Z,1513231615.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:06:55.615Z,1513231615.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:06:55.615Z,1513231615.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:06:55.616Z,1513231615.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:06:55.616Z,1513231615.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:06:56.177Z,1513231616.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:56.973Z,1513231616.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:57.377Z,1513231617.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:58.173Z,1513231618.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:58.969Z,1513231618.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:59.125Z,1513231619.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:59.179Z,1513231619.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:59.286Z,1513231619.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:59.319Z,1513231619.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:06:59.373Z,1513231619.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:59.660Z,1513231619.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:06:59.727Z,1513231619.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:00.068Z,1513231620.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:00.111Z,1513231620.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:00.170Z,1513231620.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:00.459Z,1513231620.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:00.479Z,1513231620.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:00.865Z,1513231620.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:00.879Z,1513231620.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:00.967Z,1513231620.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:01.275Z,1513231621.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:01.295Z,1513231621.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:01.381Z,1513231621.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:01.667Z,1513231621.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:01.682Z,1513231621.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:02.059Z,1513231622.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:02.091Z,1513231622.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:02.177Z,1513231622.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:02.448Z,1513231622.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:02.486Z,1513231622.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:02.894Z,1513231622.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:02.910Z,1513231622.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:02.975Z,1513231622.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:03.265Z,1513231623.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:03.307Z,1513231623.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:03.402Z,1513231623.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:03.669Z,1513231623.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:03.683Z,1513231623.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:04.073Z,1513231624.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:04.104Z,1513231624.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:04.198Z,1513231624.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:04.466Z,1513231624.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:04.480Z,1513231624.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:04.860Z,1513231624.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:04.874Z,1513231624.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:04.993Z,1513231624.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:05.250Z,1513231625.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:05.282Z,1513231625.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:05.397Z,1513231625.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:05.656Z,1513231625.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:05.672Z,1513231625.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:06.062Z,1513231626.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:06.077Z,1513231626.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:06.193Z,1513231626.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:06.475Z,1513231626.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:06.521Z,1513231626.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:06.868Z,1513231626.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:06.884Z,1513231626.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:06.989Z,1513231626.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:07.270Z,1513231627.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:07.287Z,1513231627.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:07.393Z,1513231627.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:07.670Z,1513231627.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:07.686Z,1513231627.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:08.063Z,1513231628.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:08.121Z,1513231628.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:08.190Z,1513231628.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:08.457Z,1513231628.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:08.472Z,1513231628.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:08.855Z,1513231628.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:08.875Z,1513231628.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:08.985Z,1513231628.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:09.266Z,1513231629.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:09.282Z,1513231629.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:09.389Z,1513231629.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:09.669Z,1513231629.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:09.684Z,1513231629.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:10.066Z,1513231630.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:10.080Z,1513231630.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:10.186Z,1513231630.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:10.474Z,1513231630.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:10.489Z,1513231630.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:10.852Z,1513231630.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:10.915Z,1513231630.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:10.981Z,1513231630.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:11.247Z,1513231631.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:11.273Z,1513231631.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:11.385Z,1513231631.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:11.647Z,1513231631.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:11.679Z,1513231631.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:12.052Z,1513231632.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:12.077Z,1513231632.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:12.181Z,1513231632.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:12.448Z,1513231632.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:12.475Z,1513231632.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:12.887Z,1513231632.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:12.931Z,1513231632.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:12.978Z,1513231632.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:13.262Z,1513231633.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:13.291Z,1513231633.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:13.381Z,1513231633.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:13.657Z,1513231633.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:13.687Z,1513231633.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:14.053Z,1513231634.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:14.084Z,1513231634.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:14.178Z,1513231634.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:14.489Z,1513231634.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:14.505Z,1513231634.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:14.852Z,1513231634.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:14.887Z,1513231634.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:14.975Z,1513231634.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:15.258Z,1513231635.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:15.272Z,1513231635.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:15.397Z,1513231635.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:15.673Z,1513231635.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:15.701Z,1513231635.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:16.088Z,1513231636.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:16.112Z,1513231636.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:16.194Z,1513231636.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:16.460Z,1513231636.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:16.479Z,1513231636.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:16.847Z,1513231636.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:16.883Z,1513231636.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:16.996Z,1513231636.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:17.262Z,1513231637.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:17.276Z,1513231637.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:17.401Z,1513231637.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:17.663Z,1513231637.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:17.678Z,1513231637.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:18.056Z,1513231638.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:18.072Z,1513231638.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:18.197Z,1513231638.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:18.451Z,1513231638.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:18.472Z,1513231638.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:18.866Z,1513231638.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:18.887Z,1513231638.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:18.993Z,1513231638.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:19.266Z,1513231639.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:19.280Z,1513231639.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:19.397Z,1513231639.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:19.668Z,1513231639.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:19.758Z,1513231639.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:20.047Z,1513231640.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:20.110Z,1513231640.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:20.194Z,1513231640.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:20.464Z,1513231640.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:20.478Z,1513231640.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:20.848Z,1513231640.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:20.965Z,1513231640.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:20.989Z,1513231640.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:21.252Z,1513231641.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:21.279Z,1513231641.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:21.393Z,1513231641.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:21.676Z,1513231641.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:21.723Z,1513231641.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:22.071Z,1513231642.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:22.086Z,1513231642.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:22.190Z,1513231642.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:22.473Z,1513231642.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:22.495Z,1513231642.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:22.851Z,1513231642.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:22.889Z,1513231642.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:22.986Z,1513231642.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:23.247Z,1513231643.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:23.287Z,1513231643.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:23.389Z,1513231643.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:23.659Z,1513231643.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:23.694Z,1513231643.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:24.057Z,1513231644.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:24.071Z,1513231644.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:24.185Z,1513231644.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:24.481Z,1513231644.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:24.503Z,1513231644.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:24.866Z,1513231644.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:24.889Z,1513231644.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:24.982Z,1513231644.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:25.281Z,1513231645.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:25.339Z,1513231645.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:25.385Z,1513231645.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:25.657Z,1513231645.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:25.689Z,1513231645.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:26.063Z,1513231646.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:26.103Z,1513231646.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:26.182Z,1513231646.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:26.452Z,1513231646.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:26.478Z,1513231646.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:26.860Z,1513231646.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:26.876Z,1513231646.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:26.977Z,1513231646.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:27.260Z,1513231647.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:27.275Z,1513231647.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:27.381Z,1513231647.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:27.669Z,1513231647.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:27.683Z,1513231647.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:28.069Z,1513231648.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:28.084Z,1513231648.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:28.178Z,1513231648.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:28.470Z,1513231648.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:28.484Z,1513231648.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:28.861Z,1513231648.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:28.876Z,1513231648.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:28.975Z,1513231648.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:29.297Z,1513231649.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:29.324Z,1513231649.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:29.381Z,1513231649.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:29.647Z,1513231649.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:29.679Z,1513231649.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:30.052Z,1513231650.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:30.122Z,1513231650.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:30.178Z,1513231650.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:30.448Z,1513231650.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:30.483Z,1513231650.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:30.867Z,1513231650.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:30.890Z,1513231650.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:30.975Z,1513231650.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:31.272Z,1513231651.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:31.287Z,1513231651.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:31.385Z,1513231651.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:31.675Z,1513231651.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:31.689Z,1513231651.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:32.052Z,1513231652.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:32.079Z,1513231652.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:32.182Z,1513231652.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:32.490Z,1513231652.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:32.512Z,1513231652.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:32.856Z,1513231652.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:32.875Z,1513231652.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:32.977Z,1513231652.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:33.263Z,1513231653.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:33.278Z,1513231653.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:33.381Z,1513231653.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:33.666Z,1513231653.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:33.680Z,1513231653.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:34.070Z,1513231654.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:34.084Z,1513231654.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:34.178Z,1513231654.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:34.464Z,1513231654.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:34.483Z,1513231654.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:34.852Z,1513231654.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:34.877Z,1513231654.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:34.974Z,1513231654.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:35.247Z,1513231655.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:35.283Z,1513231655.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:35.377Z,1513231655.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:35.651Z,1513231655.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:35.677Z,1513231655.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:36.048Z,1513231656.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:36.091Z,1513231656.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:36.173Z,1513231656.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:36.452Z,1513231656.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:36.484Z,1513231656.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:36.858Z,1513231656.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:36.884Z,1513231656.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:36.969Z,1513231656.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:37.265Z,1513231657.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:37.294Z,1513231657.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:37.373Z,1513231657.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:37.666Z,1513231657.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:37.691Z,1513231657.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:38.056Z,1513231658.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:38.094Z,1513231658.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:38.170Z,1513231658.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:38.456Z,1513231658.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:38.471Z,1513231658.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:38.898Z,1513231658.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:38.918Z,1513231658.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:38.966Z,1513231658.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:39.256Z,1513231659.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:39.270Z,1513231659.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:39.369Z,1513231659.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:39.673Z,1513231659.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:39.709Z,1513231659.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:40.066Z,1513231660.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:40.080Z,1513231660.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:40.166Z,1513231660.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:40.463Z,1513231660.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:40.483Z,1513231660.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:40.854Z,1513231660.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:40.875Z,1513231660.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:40.961Z,1513231660.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:41.268Z,1513231661.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:41.287Z,1513231661.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:41.365Z,1513231661.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:41.655Z,1513231661.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:41.670Z,1513231661.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:42.078Z,1513231662.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:42.162Z,1513231662.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:42.164Z,1513231662.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:42.450Z,1513231662.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:42.479Z,1513231662.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:42.897Z,1513231662.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:42.959Z,1513231662.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:43.052Z,1513231663.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:43.269Z,1513231663.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:43.283Z,1513231663.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:43.397Z,1513231663.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:43.662Z,1513231663.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:43.715Z,1513231663.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:44.056Z,1513231664.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:44.071Z,1513231664.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:44.194Z,1513231664.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:44.460Z,1513231664.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:44.475Z,1513231664.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:44.862Z,1513231664.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:44.878Z,1513231664.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:44.990Z,1513231664.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:45.248Z,1513231665.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:45.299Z,1513231665.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:45.394Z,1513231665.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:45.672Z,1513231665.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:45.687Z,1513231665.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:46.075Z,1513231666.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:46.095Z,1513231666.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:46.190Z,1513231666.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:46.469Z,1513231666.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:46.489Z,1513231666.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:46.847Z,1513231666.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:46.879Z,1513231666.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:46.985Z,1513231666.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:47.247Z,1513231667.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:47.279Z,1513231667.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:47.389Z,1513231667.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:47.652Z,1513231667.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:47.677Z,1513231667.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:48.048Z,1513231668.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:48.080Z,1513231668.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:48.185Z,1513231668.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:48.468Z,1513231668.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:48.504Z,1513231668.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:48.899Z,1513231668.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:48.981Z,1513231668.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:48.986Z,1513231668.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:49.269Z,1513231669.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:49.301Z,1513231669.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:49.385Z,1513231669.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:49.662Z,1513231669.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:49.688Z,1513231669.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:50.054Z,1513231670.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:50.069Z,1513231670.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:50.182Z,1513231670.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:50.448Z,1513231670.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:50.463Z,1513231670.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:50.857Z,1513231670.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:50.873Z,1513231670.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:50.977Z,1513231670.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:51.257Z,1513231671.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:51.272Z,1513231671.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:51.381Z,1513231671.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:51.669Z,1513231671.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:51.692Z,1513231671.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:52.070Z,1513231672.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:52.120Z,1513231672.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:52.178Z,1513231672.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:52.473Z,1513231672.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:52.488Z,1513231672.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:52.848Z,1513231672.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:52.882Z,1513231672.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:52.973Z,1513231672.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:53.247Z,1513231673.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:53.283Z,1513231673.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:53.377Z,1513231673.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:53.651Z,1513231673.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:53.675Z,1513231673.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:54.064Z,1513231674.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:54.079Z,1513231674.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:54.173Z,1513231674.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:54.444Z,1513231674.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:54.479Z,1513231674.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:54.876Z,1513231674.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:54.923Z,1513231674.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:54.969Z,1513231674.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:55.271Z,1513231675.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:55.286Z,1513231675.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:55.373Z,1513231675.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:55.672Z,1513231675.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:55.691Z,1513231675.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:56.169Z,1513231676.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:56.966Z,1513231676.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:57.373Z,1513231677.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:58.170Z,1513231678.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:58.967Z,1513231678.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:59.243Z,1513231679.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:59.278Z,1513231679.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:59.368Z,1513231679.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:59.386Z,1513231679.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:59.403Z,1513231679.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:07:59.745Z,1513231679.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:07:59.776Z,1513231679.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:00.153Z,1513231680.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:00.176Z,1513231680.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:00.182Z,1513231680.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:00.546Z,1513231680.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:00.575Z,1513231680.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:00.934Z,1513231680.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:00.948Z,1513231680.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:00.977Z,1513231680.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:01.349Z,1513231681.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:01.381Z,1513231681.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:01.397Z,1513231681.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:01.738Z,1513231681.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:01.753Z,1513231681.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:02.136Z,1513231682.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:02.151Z,1513231682.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:02.178Z,1513231682.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:02.549Z,1513231682.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:02.564Z,1513231682.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:02.951Z,1513231682.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:02.966Z,1513231682.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:02.974Z,1513231682.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:03.350Z,1513231683.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:03.366Z,1513231683.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:03.377Z,1513231683.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:03.728Z,1513231683.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:03.826Z,1513231683.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:04.127Z,1513231684.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:04.159Z,1513231684.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:04.174Z,1513231684.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:04.549Z,1513231684.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:04.681Z,1513231684.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:04.941Z,1513231684.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:04.956Z,1513231684.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:04.970Z,1513231684.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:05.343Z,1513231685.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:05.373Z,1513231685.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:05.391Z,1513231685.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:05.727Z,1513231685.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:05.751Z,1513231685.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:06.128Z,1513231686.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:06.159Z,1513231686.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:06.170Z,1513231686.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:06.531Z,1513231686.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:06.556Z,1513231686.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:06.945Z,1513231686.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:06.965Z,1513231686.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:06.983Z,1513231686.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:07.356Z,1513231687.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:07.369Z,1513231687.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:07.375Z,1513231687.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:07.754Z,1513231687.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:07.779Z,1513231687.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:08.134Z,1513231688.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:08.166Z,1513231688.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:08.169Z,1513231688.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:08.528Z,1513231688.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:08.543Z,1513231688.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:08.935Z,1513231688.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:08.951Z,1513231688.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:08.961Z,1513231688.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:09.335Z,1513231689.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:09.355Z,1513231689.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:09.365Z,1513231689.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:09.745Z,1513231689.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:09.760Z,1513231689.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:10.143Z,1513231690.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:10.157Z,1513231690.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:10.162Z,1513231690.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:10.541Z,1513231690.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:10.556Z,1513231690.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:10.959Z,1513231690.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:10.999Z,1513231690.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:11.046Z,1513231691.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:11.334Z,1513231691.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:11.354Z,1513231691.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:11.393Z,1513231691.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:11.736Z,1513231691.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:11.751Z,1513231691.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:12.144Z,1513231692.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:12.158Z,1513231692.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:12.190Z,1513231692.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:12.524Z,1513231692.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:12.551Z,1513231692.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:12.981Z,1513231692.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:12.986Z,1513231692.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:13.015Z,1513231693.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:13.345Z,1513231693.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:13.373Z,1513231693.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:13.401Z,1513231693.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:13.738Z,1513231693.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:13.787Z,1513231693.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:14.133Z,1513231694.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:14.147Z,1513231694.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:14.198Z,1513231694.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:14.538Z,1513231694.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:14.552Z,1513231694.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:14.932Z,1513231694.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:14.960Z,1513231694.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:14.993Z,1513231694.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:15.327Z,1513231695.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:15.358Z,1513231695.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:15.397Z,1513231695.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:15.753Z,1513231695.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:15.803Z,1513231695.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:16.155Z,1513231696.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:16.170Z,1513231696.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:16.193Z,1513231696.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:16.554Z,1513231696.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:16.568Z,1513231696.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:16.933Z,1513231696.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:16.956Z,1513231696.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:16.989Z,1513231696.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:17.387Z,1513231697.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:17.393Z,1513231697.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:17.433Z,1513231697.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:17.734Z,1513231697.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:17.755Z,1513231697.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:18.139Z,1513231698.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:18.159Z,1513231698.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:18.190Z,1513231698.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:18.528Z,1513231698.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:18.559Z,1513231698.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:18.944Z,1513231698.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:18.959Z,1513231698.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:18.986Z,1513231698.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:19.346Z,1513231699.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:19.367Z,1513231699.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:19.389Z,1513231699.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:19.738Z,1513231699.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:19.765Z,1513231699.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:20.138Z,1513231700.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:20.153Z,1513231700.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:20.186Z,1513231700.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:20.566Z,1513231700.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:20.650Z,1513231700.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:20.944Z,1513231700.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:20.963Z,1513231700.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:20.981Z,1513231700.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:21.330Z,1513231701.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:21.365Z,1513231701.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:21.385Z,1513231701.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:21.743Z,1513231701.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:21.763Z,1513231701.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:22.148Z,1513231702.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:22.163Z,1513231702.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:22.182Z,1513231702.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:22.549Z,1513231702.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:22.563Z,1513231702.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:22.930Z,1513231702.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:22.953Z,1513231702.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:22.978Z,1513231702.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:23.332Z,1513231703.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:23.355Z,1513231703.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:23.381Z,1513231703.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:23.732Z,1513231703.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:23.754Z,1513231703.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:24.150Z,1513231704.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:24.165Z,1513231704.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:24.178Z,1513231704.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:24.539Z,1513231704.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:24.559Z,1513231704.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:24.965Z,1513231704.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:24.976Z,1513231704.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:25.024Z,1513231705.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:25.341Z,1513231705.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:25.375Z,1513231705.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:25.409Z,1513231705.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:25.754Z,1513231705.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:25.824Z,1513231705.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:26.127Z,1513231706.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:26.190Z,1513231706.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:26.206Z,1513231706.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:26.535Z,1513231706.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:26.566Z,1513231706.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:27.002Z,1513231707.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:27.034Z,1513231707.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:27.086Z,1513231707.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:27.338Z,1513231707.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:27.391Z,1513231707.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:27.409Z,1513231707.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:27.751Z,1513231707.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:27.771Z,1513231707.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:28.150Z,1513231708.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:28.202Z,1513231708.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:28.206Z,1513231708.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:28.548Z,1513231708.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:28.564Z,1513231708.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:28.928Z,1513231708.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:28.963Z,1513231708.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:29.001Z,1513231709.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:29.328Z,1513231709.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:29.359Z,1513231709.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:29.405Z,1513231709.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:29.735Z,1513231709.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:29.762Z,1513231709.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:30.130Z,1513231710.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:30.163Z,1513231710.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:30.202Z,1513231710.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:30.527Z,1513231710.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:30.544Z,1513231710.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:30.950Z,1513231710.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:30.984Z,1513231710.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:30.997Z,1513231710.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:31.346Z,1513231711.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:31.374Z,1513231711.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:31.401Z,1513231711.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:31.738Z,1513231711.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:31.754Z,1513231711.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:32.137Z,1513231712.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:32.153Z,1513231712.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:32.198Z,1513231712.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:32.534Z,1513231712.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:32.554Z,1513231712.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:32.932Z,1513231712.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:32.959Z,1513231712.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:32.994Z,1513231712.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:33.360Z,1513231713.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:33.395Z,1513231713.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:33.397Z,1513231713.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:33.744Z,1513231713.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:33.760Z,1513231713.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:34.145Z,1513231714.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:34.168Z,1513231714.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:34.194Z,1513231714.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:34.549Z,1513231714.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:34.564Z,1513231714.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:34.928Z,1513231714.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:34.942Z,1513231714.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:34.990Z,1513231714.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:35.335Z,1513231715.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:35.372Z,1513231715.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:35.393Z,1513231715.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:35.727Z,1513231715.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:35.747Z,1513231715.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:36.132Z,1513231716.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:36.147Z,1513231716.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:36.190Z,1513231716.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:36.569Z,1513231716.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:36.718Z,1513231716.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:36.950Z,1513231716.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:36.980Z,1513231716.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:36.985Z,1513231716.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:37.353Z,1513231717.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:37.379Z,1513231717.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:37.389Z,1513231717.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:37.751Z,1513231717.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:37.775Z,1513231717.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:38.135Z,1513231718.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:38.149Z,1513231718.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:38.186Z,1513231718.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:38.537Z,1513231718.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:38.551Z,1513231718.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:38.984Z,1513231718.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:38.994Z,1513231718.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:39.030Z,1513231719.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:39.340Z,1513231719.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:39.355Z,1513231719.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:39.418Z,1513231719.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:39.750Z,1513231719.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:39.764Z,1513231719.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:40.152Z,1513231720.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:40.167Z,1513231720.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:40.234Z,1513231720.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:40.536Z,1513231720.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:40.562Z,1513231720.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:40.937Z,1513231720.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:41.029Z,1513231721.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:41.042Z,1513231721.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:41.331Z,1513231721.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:41.351Z,1513231721.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:41.433Z,1513231721.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:41.735Z,1513231721.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:41.755Z,1513231721.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:42.133Z,1513231722.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:42.148Z,1513231722.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:42.231Z,1513231722.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:42.532Z,1513231722.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:42.548Z,1513231722.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:42.942Z,1513231722.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:42.983Z,1513231722.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:43.026Z,1513231723.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:43.341Z,1513231723.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:43.371Z,1513231723.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:43.429Z,1513231723.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:43.738Z,1513231723.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:43.764Z,1513231723.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:44.128Z,1513231724.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:44.142Z,1513231724.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:44.225Z,1513231724.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:44.528Z,1513231724.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:44.543Z,1513231724.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:44.927Z,1513231724.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:44.953Z,1513231724.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:45.021Z,1513231725.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:45.339Z,1513231725.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:45.354Z,1513231725.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:45.425Z,1513231725.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:45.750Z,1513231725.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:45.771Z,1513231725.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:46.163Z,1513231726.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:46.201Z,1513231726.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:46.222Z,1513231726.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:46.553Z,1513231726.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:46.568Z,1513231726.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:46.928Z,1513231726.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:46.951Z,1513231726.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:47.017Z,1513231727.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:47.332Z,1513231727.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:47.372Z,1513231727.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:47.421Z,1513231727.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:47.734Z,1513231727.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:47.748Z,1513231727.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:48.134Z,1513231728.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:48.155Z,1513231728.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:48.217Z,1513231728.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:48.532Z,1513231728.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:48.653Z,1513231728.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:48.941Z,1513231728.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:49.005Z,1513231729.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:49.014Z,1513231729.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:49.380Z,1513231729.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:49.417Z,1513231729.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:49.434Z,1513231729.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:49.741Z,1513231729.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:49.787Z,1513231729.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:50.138Z,1513231730.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:50.152Z,1513231730.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:50.213Z,1513231730.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:50.534Z,1513231730.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:50.580Z,1513231730.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:50.928Z,1513231730.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:50.955Z,1513231730.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:51.009Z,1513231731.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:51.344Z,1513231731.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:51.359Z,1513231731.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:51.413Z,1513231731.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:51.751Z,1513231731.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:51.771Z,1513231731.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:52.150Z,1513231732.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:52.165Z,1513231732.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:52.210Z,1513231732.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:52.554Z,1513231732.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:52.596Z,1513231732.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:52.953Z,1513231732.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:53.006Z,1513231733.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:53.042Z,1513231733.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:53.335Z,1513231733.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:53.371Z,1513231733.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:53.409Z,1513231733.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:53.739Z,1513231733.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:53.776Z,1513231733.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:54.133Z,1513231734.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:54.148Z,1513231734.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:54.205Z,1513231734.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:54.536Z,1513231734.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:54.552Z,1513231734.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:54.986Z,1513231734.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:55.001Z,1513231735.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:55.031Z,1513231735.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:55.342Z,1513231735.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:55.357Z,1513231735.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:55.409Z,1513231735.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:55.784Z,1513231735.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:55.815Z,1513231735.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:56.205Z,1513231736.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:57.001Z,1513231737.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:57.405Z,1513231737.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:58.201Z,1513231738.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:58.998Z,1513231738.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:59.234Z,1513231739.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:59.292Z,1513231739.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:59.400Z,1513231739.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:59.401Z,1513231739.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:59.460Z,1513231739.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:08:59.761Z,1513231739.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:08:59.793Z,1513231739.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:00.165Z,1513231740.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:00.198Z,1513231740.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:00.207Z,1513231740.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:00.554Z,1513231740.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:00.569Z,1513231740.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:00.956Z,1513231740.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:00.971Z,1513231740.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:00.993Z,1513231740.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:01.375Z,1513231741.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:01.390Z,1513231741.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:01.742Z,1513231741.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:01.759Z,1513231741.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:01.774Z,1513231741.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:02.165Z,1513231742.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:02.214Z,1513231742.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:02.537Z,1513231742.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:02.565Z,1513231742.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:02.620Z,1513231742.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:02.971Z,1513231742.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:02.987Z,1513231742.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:03.054Z,1513231743.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:03.365Z,1513231743.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:03.380Z,1513231743.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:03.745Z,1513231743.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:03.776Z,1513231743.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:03.849Z,1513231743.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:04.148Z,1513231744.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:04.163Z,1513231744.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:04.560Z,1513231744.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:04.576Z,1513231744.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:04.648Z,1513231744.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:04.962Z,1513231744.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:05.008Z,1513231745.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:05.081Z,1513231745.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:05.396Z,1513231745.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:05.421Z,1513231745.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:05.740Z,1513231745.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:05.775Z,1513231745.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:05.878Z,1513231745.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:06.153Z,1513231746.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:06.168Z,1513231746.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:06.551Z,1513231746.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:06.571Z,1513231746.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:06.673Z,1513231746.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:07.023Z,1513231747.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:07.053Z,1513231747.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:07.366Z,1513231747.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:07.383Z,1513231747.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:07.390Z,1513231747.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:07.761Z,1513231747.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:07.776Z,1513231747.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:08.140Z,1513231748.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:08.167Z,1513231748.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:08.185Z,1513231748.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:08.197Z,1513231748.197 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:09:08.579Z,1513231748.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:08.627Z,1513231748.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:08.984Z,1513231748.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:09.018Z,1513231749.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:09.057Z,1513231749.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:09.347Z,1513231749.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:09.371Z,1513231749.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:09.393Z,1513231749.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:09.759Z,1513231749.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:09.774Z,1513231749.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:10.159Z,1513231750.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:10.182Z,1513231750.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:10.190Z,1513231750.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:10.568Z,1513231750.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:10.640Z,1513231750.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:10.943Z,1513231750.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:10.978Z,1513231750.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:10.986Z,1513231750.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:11.340Z,1513231751.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:11.389Z,1513231751.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:11.395Z,1513231751.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:11.786Z,1513231751.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:11.840Z,1513231751.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:12.150Z,1513231752.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:12.165Z,1513231752.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:12.186Z,1513231752.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:12.546Z,1513231752.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:12.658Z,1513231752.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:12.964Z,1513231752.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:12.982Z,1513231752.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:12.987Z,1513231752.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:13.365Z,1513231753.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:13.385Z,1513231753.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:13.415Z,1513231753.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:13.762Z,1513231753.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:13.778Z,1513231753.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:14.139Z,1513231754.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:14.171Z,1513231754.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:14.182Z,1513231754.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:14.539Z,1513231754.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:14.573Z,1513231754.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:14.944Z,1513231754.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:14.978Z,1513231754.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:15.012Z,1513231755.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:15.358Z,1513231755.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:15.372Z,1513231755.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:15.381Z,1513231755.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:15.773Z,1513231755.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:15.805Z,1513231755.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:16.156Z,1513231756.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:16.176Z,1513231756.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:16.178Z,1513231756.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:16.557Z,1513231756.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:16.572Z,1513231756.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:16.939Z,1513231756.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:16.965Z,1513231756.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:16.973Z,1513231756.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:17.345Z,1513231757.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:17.371Z,1513231757.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:17.378Z,1513231757.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:17.749Z,1513231757.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:17.763Z,1513231757.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:18.174Z,1513231758.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:18.176Z,1513231758.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:18.222Z,1513231758.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:18.541Z,1513231758.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:18.556Z,1513231758.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:18.965Z,1513231758.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:18.970Z,1513231758.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:19.010Z,1513231759.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:19.353Z,1513231759.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:19.373Z,1513231759.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:19.375Z,1513231759.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:19.749Z,1513231759.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:19.764Z,1513231759.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:20.147Z,1513231760.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:20.162Z,1513231760.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:20.170Z,1513231760.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:20.547Z,1513231760.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:20.563Z,1513231760.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:20.966Z,1513231760.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:21.010Z,1513231761.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:21.050Z,1513231761.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:21.379Z,1513231761.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:21.406Z,1513231761.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:21.408Z,1513231761.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:21.753Z,1513231761.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:21.799Z,1513231761.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:22.159Z,1513231762.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:22.186Z,1513231762.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:22.202Z,1513231762.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:22.554Z,1513231762.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:22.583Z,1513231762.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:22.999Z,1513231762.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:23.022Z,1513231763.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:23.060Z,1513231763.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:23.339Z,1513231763.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:23.364Z,1513231763.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:23.401Z,1513231763.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:23.739Z,1513231763.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:23.764Z,1513231763.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:24.140Z,1513231764.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:24.172Z,1513231764.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:24.198Z,1513231764.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:24.538Z,1513231764.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:24.564Z,1513231764.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:24.951Z,1513231764.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:24.992Z,1513231764.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:24.994Z,1513231764.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:25.374Z,1513231765.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:25.388Z,1513231765.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:25.397Z,1513231765.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:25.753Z,1513231765.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:25.788Z,1513231765.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:26.150Z,1513231766.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:26.164Z,1513231766.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:26.194Z,1513231766.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:26.545Z,1513231766.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:26.560Z,1513231766.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:26.944Z,1513231766.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:26.983Z,1513231766.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:26.989Z,1513231766.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:27.340Z,1513231767.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:27.356Z,1513231767.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:27.393Z,1513231767.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:27.757Z,1513231767.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:27.786Z,1513231767.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:28.178Z,1513231768.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:28.189Z,1513231768.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:28.207Z,1513231768.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:28.558Z,1513231768.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:28.629Z,1513231768.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:28.951Z,1513231768.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:28.986Z,1513231768.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:28.993Z,1513231768.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:29.348Z,1513231769.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:29.387Z,1513231769.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:29.389Z,1513231769.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:29.744Z,1513231769.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:29.761Z,1513231769.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:30.147Z,1513231770.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:30.162Z,1513231770.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:30.186Z,1513231770.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:30.544Z,1513231770.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:30.571Z,1513231770.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:30.965Z,1513231770.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:30.982Z,1513231770.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:31.007Z,1513231771.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:31.376Z,1513231771.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:31.385Z,1513231771.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:31.407Z,1513231771.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:31.762Z,1513231771.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:31.778Z,1513231771.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:32.147Z,1513231772.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:32.164Z,1513231772.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:32.182Z,1513231772.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:32.548Z,1513231772.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:32.567Z,1513231772.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:32.960Z,1513231772.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:32.968Z,1513231772.968 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T06:09:32.969Z,1513231772.969 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:09:32.969Z,1513231772.969 [BPC1](ERROR): Data Fault
2017-12-14T06:09:32.978Z,1513231772.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:32.980Z,1513231772.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:33.022Z,1513231773.022 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:09:33.348Z,1513231773.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:33.363Z,1513231773.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:33.381Z,1513231773.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:33.777Z,1513231773.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:33.807Z,1513231773.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:34.161Z,1513231774.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:34.176Z,1513231774.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:34.178Z,1513231774.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:34.206Z,1513231774.206 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:09:34.206Z,1513231774.206 [BPC1] No Fault, FailCount= 1
2017-12-14T06:09:34.584Z,1513231774.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:34.687Z,1513231774.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:34.975Z,1513231774.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:35.030Z,1513231775.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:35.059Z,1513231775.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:35.339Z,1513231775.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:35.375Z,1513231775.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:35.389Z,1513231775.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:35.756Z,1513231775.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:35.771Z,1513231775.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:36.141Z,1513231776.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:36.167Z,1513231776.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:36.185Z,1513231776.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:36.536Z,1513231776.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:36.571Z,1513231776.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:36.984Z,1513231776.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:37.011Z,1513231777.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:37.047Z,1513231777.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:37.357Z,1513231777.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:37.371Z,1513231777.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:37.389Z,1513231777.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:37.798Z,1513231777.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:37.823Z,1513231777.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:38.153Z,1513231778.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:38.168Z,1513231778.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:38.186Z,1513231778.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:38.551Z,1513231778.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:38.565Z,1513231778.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:38.940Z,1513231778.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:38.979Z,1513231778.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:38.982Z,1513231778.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:39.347Z,1513231779.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:39.379Z,1513231779.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:39.385Z,1513231779.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:39.757Z,1513231779.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:39.783Z,1513231779.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:40.149Z,1513231780.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:40.180Z,1513231780.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:40.182Z,1513231780.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:40.558Z,1513231780.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:40.648Z,1513231780.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:40.969Z,1513231780.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:40.978Z,1513231780.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:41.012Z,1513231781.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:41.345Z,1513231781.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:41.374Z,1513231781.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:41.381Z,1513231781.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:41.751Z,1513231781.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:41.772Z,1513231781.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:42.148Z,1513231782.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:42.163Z,1513231782.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:42.178Z,1513231782.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:42.536Z,1513231782.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:42.573Z,1513231782.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:42.953Z,1513231782.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:42.974Z,1513231782.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:43.010Z,1513231783.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:43.370Z,1513231783.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:43.377Z,1513231783.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:43.520Z,1513231783.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:43.762Z,1513231783.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:43.777Z,1513231783.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:44.162Z,1513231784.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:44.174Z,1513231784.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:44.202Z,1513231784.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:44.555Z,1513231784.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:44.646Z,1513231784.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:44.950Z,1513231784.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:44.965Z,1513231784.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:44.970Z,1513231784.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:45.350Z,1513231785.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:45.364Z,1513231785.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:45.373Z,1513231785.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:45.754Z,1513231785.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:45.769Z,1513231785.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:46.162Z,1513231786.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:46.170Z,1513231786.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:46.194Z,1513231786.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:46.554Z,1513231786.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:46.568Z,1513231786.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:46.949Z,1513231786.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:46.963Z,1513231786.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:46.965Z,1513231786.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:47.352Z,1513231787.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:47.369Z,1513231787.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:47.388Z,1513231787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:47.757Z,1513231787.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:47.772Z,1513231787.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:48.156Z,1513231788.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:48.165Z,1513231788.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:48.172Z,1513231788.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:48.533Z,1513231788.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:48.570Z,1513231788.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:48.963Z,1513231788.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:49.002Z,1513231789.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:49.042Z,1513231789.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:49.353Z,1513231789.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:49.368Z,1513231789.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:49.417Z,1513231789.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:49.751Z,1513231789.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:49.771Z,1513231789.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:50.152Z,1513231790.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:50.167Z,1513231790.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:50.214Z,1513231790.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:50.572Z,1513231790.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:50.591Z,1513231790.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:51.010Z,1513231791.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:51.022Z,1513231791.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:51.066Z,1513231791.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:51.351Z,1513231791.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:51.371Z,1513231791.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:51.413Z,1513231791.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:51.758Z,1513231791.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:51.773Z,1513231791.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:52.162Z,1513231792.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:52.178Z,1513231792.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:52.210Z,1513231792.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:52.555Z,1513231792.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:52.570Z,1513231792.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:52.950Z,1513231792.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:52.975Z,1513231792.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:53.005Z,1513231793.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:53.339Z,1513231793.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:53.379Z,1513231793.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:53.409Z,1513231793.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:53.742Z,1513231793.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:53.831Z,1513231793.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:54.140Z,1513231794.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:54.176Z,1513231794.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:54.206Z,1513231794.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:54.543Z,1513231794.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:54.569Z,1513231794.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:54.950Z,1513231794.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:55.001Z,1513231795.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:55.015Z,1513231795.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:55.358Z,1513231795.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:55.383Z,1513231795.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:55.405Z,1513231795.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:55.754Z,1513231795.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:55.811Z,1513231795.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:55.811Z,1513231795.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2017-12-14T06:09:55.811Z,1513231795.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:09:55.833Z,1513231795.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:55.833Z,1513231795.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113
2017-12-14T06:09:55.833Z,1513231795.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:09:55.835Z,1513231795.835 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:09:55.835Z,1513231795.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2017-12-14T06:09:55.835Z,1513231795.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:09:55.864Z,1513231795.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:09:55.864Z,1513231795.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:09:55.870Z,1513231795.870 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:09:56.202Z,1513231796.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:57.015Z,1513231797.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:57.417Z,1513231797.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:58.213Z,1513231798.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.009Z,1513231799.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.259Z,1513231799.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.298Z,1513231799.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:09:59.298Z,1513231799.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2017-12-14T06:09:59.299Z,1513231799.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:09:59.299Z,1513231799.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113
2017-12-14T06:09:59.299Z,1513231799.299 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:09:59.299Z,1513231799.299 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2017-12-14T06:09:59.395Z,1513231799.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.413Z,1513231799.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.473Z,1513231799.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:09:59.474Z,1513231799.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:09:59.474Z,1513231799.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:09:59.474Z,1513231799.474 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:09:59.475Z,1513231799.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:09:59.475Z,1513231799.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:09:59.475Z,1513231799.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:09:59.476Z,1513231799.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:09:59.476Z,1513231799.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:09:59.753Z,1513231799.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:09:59.768Z,1513231799.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:00.156Z,1513231800.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:00.170Z,1513231800.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:00.210Z,1513231800.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:00.555Z,1513231800.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:00.569Z,1513231800.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:00.935Z,1513231800.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:00.968Z,1513231800.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:01.005Z,1513231801.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:01.349Z,1513231801.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:01.363Z,1513231801.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:01.409Z,1513231801.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:01.750Z,1513231801.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:01.765Z,1513231801.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:02.152Z,1513231802.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:02.166Z,1513231802.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:02.206Z,1513231802.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:02.562Z,1513231802.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:02.577Z,1513231802.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:02.982Z,1513231802.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:03.002Z,1513231803.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:03.031Z,1513231803.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:03.350Z,1513231803.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:03.406Z,1513231803.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:03.420Z,1513231803.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:03.736Z,1513231803.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:03.771Z,1513231803.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:04.139Z,1513231804.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:04.171Z,1513231804.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:04.210Z,1513231804.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:04.547Z,1513231804.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:04.579Z,1513231804.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:04.976Z,1513231804.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:05.006Z,1513231805.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:05.033Z,1513231805.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:05.354Z,1513231805.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:05.377Z,1513231805.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:05.421Z,1513231805.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:05.741Z,1513231805.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:05.755Z,1513231805.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:06.142Z,1513231806.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:06.156Z,1513231806.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:06.217Z,1513231806.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:06.557Z,1513231806.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:06.649Z,1513231806.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:06.948Z,1513231806.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:06.967Z,1513231806.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:07.014Z,1513231807.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:07.404Z,1513231807.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:07.424Z,1513231807.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:07.750Z,1513231807.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:07.754Z,1513231807.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:07.799Z,1513231807.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:08.148Z,1513231808.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:08.163Z,1513231808.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:08.549Z,1513231808.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:08.550Z,1513231808.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:08.565Z,1513231808.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:08.937Z,1513231808.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:08.975Z,1513231808.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:09.054Z,1513231809.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:09.335Z,1513231809.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:09.365Z,1513231809.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:09.762Z,1513231809.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:09.778Z,1513231809.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:09.851Z,1513231809.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:10.160Z,1513231810.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:10.175Z,1513231810.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:10.545Z,1513231810.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:10.572Z,1513231810.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:10.646Z,1513231810.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:10.945Z,1513231810.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:10.971Z,1513231810.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:11.061Z,1513231811.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:11.340Z,1513231811.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:11.367Z,1513231811.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:11.742Z,1513231811.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:11.756Z,1513231811.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:12.142Z,1513231812.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:12.168Z,1513231812.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:12.536Z,1513231812.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:12.559Z,1513231812.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:12.952Z,1513231812.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:12.975Z,1513231812.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:13.358Z,1513231813.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:13.377Z,1513231813.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:13.755Z,1513231813.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:13.769Z,1513231813.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:14.135Z,1513231814.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:14.159Z,1513231814.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:14.539Z,1513231814.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:14.566Z,1513231814.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:14.957Z,1513231814.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:14.972Z,1513231814.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:15.352Z,1513231815.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:15.371Z,1513231815.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:15.760Z,1513231815.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:15.775Z,1513231815.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:16.159Z,1513231816.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:16.173Z,1513231816.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:16.553Z,1513231816.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:16.572Z,1513231816.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:16.968Z,1513231816.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:17.020Z,1513231817.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:17.342Z,1513231817.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:17.357Z,1513231817.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:17.743Z,1513231817.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:17.757Z,1513231817.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:18.139Z,1513231818.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:18.162Z,1513231818.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:18.546Z,1513231818.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:18.562Z,1513231818.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:18.973Z,1513231818.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:19.038Z,1513231819.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:19.359Z,1513231819.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:19.399Z,1513231819.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:19.773Z,1513231819.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:19.839Z,1513231819.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:20.143Z,1513231820.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:20.158Z,1513231820.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:20.546Z,1513231820.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:20.663Z,1513231820.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:20.947Z,1513231820.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:20.971Z,1513231820.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:21.343Z,1513231821.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:21.402Z,1513231821.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:21.757Z,1513231821.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:21.779Z,1513231821.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:22.158Z,1513231822.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:22.172Z,1513231822.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:22.558Z,1513231822.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:22.572Z,1513231822.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:22.938Z,1513231822.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:23.004Z,1513231823.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:23.344Z,1513231823.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:23.360Z,1513231823.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:23.740Z,1513231823.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:23.754Z,1513231823.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:24.144Z,1513231824.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:24.163Z,1513231824.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:24.538Z,1513231824.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:24.565Z,1513231824.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:24.955Z,1513231824.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:24.975Z,1513231824.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:25.361Z,1513231825.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:25.375Z,1513231825.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:25.759Z,1513231825.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:25.779Z,1513231825.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:26.166Z,1513231826.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:26.207Z,1513231826.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:26.544Z,1513231826.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:26.560Z,1513231826.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:26.952Z,1513231826.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:26.974Z,1513231826.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:27.340Z,1513231827.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:27.377Z,1513231827.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:27.762Z,1513231827.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:27.779Z,1513231827.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:28.158Z,1513231828.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:28.174Z,1513231828.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:28.555Z,1513231828.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:28.569Z,1513231828.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:28.935Z,1513231828.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:28.964Z,1513231828.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:29.384Z,1513231829.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:29.439Z,1513231829.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:29.735Z,1513231829.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:29.779Z,1513231829.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:30.140Z,1513231830.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:30.155Z,1513231830.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:30.539Z,1513231830.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:30.554Z,1513231830.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:31.022Z,1513231831.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:31.059Z,1513231831.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:31.363Z,1513231831.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:31.377Z,1513231831.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:31.758Z,1513231831.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:31.779Z,1513231831.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:32.139Z,1513231832.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:32.172Z,1513231832.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:32.563Z,1513231832.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:32.615Z,1513231832.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:32.943Z,1513231832.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:33.098Z,1513231833.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:33.335Z,1513231833.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:33.371Z,1513231833.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:33.759Z,1513231833.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:33.773Z,1513231833.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:34.150Z,1513231834.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:34.171Z,1513231834.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:34.548Z,1513231834.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:34.563Z,1513231834.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:34.939Z,1513231834.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:34.964Z,1513231834.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:35.335Z,1513231835.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:35.370Z,1513231835.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:35.781Z,1513231835.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:35.824Z,1513231835.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:36.137Z,1513231836.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:36.168Z,1513231836.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:36.540Z,1513231836.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:36.567Z,1513231836.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:36.945Z,1513231836.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:36.982Z,1513231836.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:37.362Z,1513231837.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:37.377Z,1513231837.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:37.746Z,1513231837.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:37.779Z,1513231837.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:38.143Z,1513231838.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:38.175Z,1513231838.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:38.570Z,1513231838.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:38.715Z,1513231838.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:38.981Z,1513231838.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:39.025Z,1513231839.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:39.345Z,1513231839.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:39.361Z,1513231839.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:39.753Z,1513231839.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:39.777Z,1513231839.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:40.157Z,1513231840.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:40.172Z,1513231840.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:40.550Z,1513231840.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:40.564Z,1513231840.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:40.958Z,1513231840.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:40.979Z,1513231840.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:41.340Z,1513231841.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:41.371Z,1513231841.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:41.735Z,1513231841.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:41.764Z,1513231841.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:42.161Z,1513231842.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:42.219Z,1513231842.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:42.535Z,1513231842.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:42.570Z,1513231842.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:42.945Z,1513231842.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:42.975Z,1513231842.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:43.321Z,1513231843.321 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T06:10:43.321Z,1513231843.321 [NAL9602] Data Fault, FailCount= 1
2017-12-14T06:10:43.321Z,1513231843.321 [NAL9602](ERROR): Data Fault
2017-12-14T06:10:43.338Z,1513231843.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:43.383Z,1513231843.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:43.396Z,1513231843.396 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T06:10:43.714Z,1513231843.714 [NAL9602](INFO): Powering down
2017-12-14T06:10:43.732Z,1513231843.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:43.748Z,1513231843.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:44.142Z,1513231844.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:44.172Z,1513231844.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:44.535Z,1513231844.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:44.543Z,1513231844.543 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:10:44.543Z,1513231844.543 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:10:44.543Z,1513231844.543 [BPC1](ERROR): Communications Fault
2017-12-14T06:10:44.551Z,1513231844.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:44.589Z,1513231844.589 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:10:44.590Z,1513231844.590 [NAL9602] No Fault, FailCount= 1
2017-12-14T06:10:44.590Z,1513231844.590 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:10:45.025Z,1513231845.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:45.050Z,1513231845.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:45.375Z,1513231845.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:45.403Z,1513231845.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:45.741Z,1513231845.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:45.755Z,1513231845.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:45.797Z,1513231845.797 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:10:45.798Z,1513231845.798 [BPC1] No Fault, FailCount= 1
2017-12-14T06:10:46.143Z,1513231846.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:46.226Z,1513231846.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:46.539Z,1513231846.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:46.554Z,1513231846.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:46.991Z,1513231846.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:47.034Z,1513231847.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:47.335Z,1513231847.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:47.366Z,1513231847.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:47.734Z,1513231847.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:47.767Z,1513231847.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:48.142Z,1513231848.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:48.168Z,1513231848.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:48.615Z,1513231848.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:48.713Z,1513231848.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:48.939Z,1513231848.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:48.954Z,1513231848.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:49.340Z,1513231849.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:49.355Z,1513231849.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:49.739Z,1513231849.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:49.754Z,1513231849.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:50.139Z,1513231850.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:50.153Z,1513231850.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:50.538Z,1513231850.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:50.553Z,1513231850.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:50.936Z,1513231850.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:50.971Z,1513231850.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:51.334Z,1513231851.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:51.367Z,1513231851.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:51.732Z,1513231851.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:51.758Z,1513231851.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:52.135Z,1513231852.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:52.166Z,1513231852.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:52.534Z,1513231852.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:52.566Z,1513231852.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:52.940Z,1513231852.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:52.966Z,1513231852.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:53.338Z,1513231853.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:53.368Z,1513231853.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:53.742Z,1513231853.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:53.756Z,1513231853.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:54.143Z,1513231854.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:54.158Z,1513231854.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:54.548Z,1513231854.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:54.659Z,1513231854.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:54.997Z,1513231854.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:55.051Z,1513231855.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:55.344Z,1513231855.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:55.379Z,1513231855.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:55.739Z,1513231855.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:55.779Z,1513231855.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:59.229Z,1513231859.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:59.244Z,1513231859.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:59.351Z,1513231859.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:59.387Z,1513231859.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:10:59.700Z,1513231859.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:10:59.715Z,1513231859.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:00.098Z,1513231860.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:00.143Z,1513231860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:00.489Z,1513231860.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:00.505Z,1513231860.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:00.898Z,1513231860.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:00.913Z,1513231860.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:01.300Z,1513231861.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:01.315Z,1513231861.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:01.691Z,1513231861.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:01.727Z,1513231861.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:02.104Z,1513231862.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:02.119Z,1513231862.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:02.504Z,1513231862.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:02.519Z,1513231862.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:02.906Z,1513231862.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:02.922Z,1513231862.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:03.291Z,1513231863.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:03.320Z,1513231863.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:03.690Z,1513231863.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:03.718Z,1513231863.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:04.090Z,1513231864.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:04.116Z,1513231864.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:04.557Z,1513231864.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:04.580Z,1513231864.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:04.896Z,1513231864.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:04.912Z,1513231864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:05.296Z,1513231865.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:05.362Z,1513231865.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:05.699Z,1513231865.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:05.760Z,1513231865.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:06.096Z,1513231866.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:06.110Z,1513231866.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:06.503Z,1513231866.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:06.518Z,1513231866.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:06.904Z,1513231866.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:06.948Z,1513231866.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:07.303Z,1513231867.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:07.343Z,1513231867.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:07.696Z,1513231867.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:07.717Z,1513231867.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:08.098Z,1513231868.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:08.152Z,1513231868.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:08.502Z,1513231868.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:08.516Z,1513231868.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:08.899Z,1513231868.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:08.914Z,1513231868.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:09.295Z,1513231869.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:09.323Z,1513231869.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:09.703Z,1513231869.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:09.717Z,1513231869.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:10.103Z,1513231870.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:10.118Z,1513231870.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:10.502Z,1513231870.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:10.518Z,1513231870.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:10.931Z,1513231870.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:10.969Z,1513231870.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:11.300Z,1513231871.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:11.315Z,1513231871.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:11.700Z,1513231871.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:11.714Z,1513231871.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:12.101Z,1513231872.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:12.123Z,1513231872.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:12.488Z,1513231872.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:12.520Z,1513231872.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:12.891Z,1513231872.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:12.917Z,1513231872.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:13.291Z,1513231873.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:13.324Z,1513231873.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:13.685Z,1513231873.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:13.708Z,1513231873.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:14.074Z,1513231874.074 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:11:14.114Z,1513231874.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:14.175Z,1513231874.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:14.491Z,1513231874.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:14.521Z,1513231874.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:14.884Z,1513231874.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:14.900Z,1513231874.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:15.291Z,1513231875.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:15.312Z,1513231875.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:15.698Z,1513231875.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:15.713Z,1513231875.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:16.092Z,1513231876.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:16.107Z,1513231876.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:16.498Z,1513231876.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:16.537Z,1513231876.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:16.900Z,1513231876.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:16.915Z,1513231876.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:17.341Z,1513231877.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:17.360Z,1513231877.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:17.698Z,1513231877.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:17.719Z,1513231877.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:18.100Z,1513231878.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:18.115Z,1513231878.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:18.492Z,1513231878.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:18.535Z,1513231878.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:18.903Z,1513231878.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:18.927Z,1513231878.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:19.361Z,1513231879.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:19.391Z,1513231879.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:19.694Z,1513231879.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:19.712Z,1513231879.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:20.153Z,1513231880.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:20.215Z,1513231880.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:20.524Z,1513231880.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:20.563Z,1513231880.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:20.895Z,1513231880.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:20.930Z,1513231880.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:21.317Z,1513231881.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:21.368Z,1513231881.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:21.701Z,1513231881.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:21.754Z,1513231881.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:22.105Z,1513231882.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:22.124Z,1513231882.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:22.522Z,1513231882.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:22.654Z,1513231882.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:22.892Z,1513231882.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:22.940Z,1513231882.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:23.296Z,1513231883.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:23.344Z,1513231883.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:23.698Z,1513231883.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:23.744Z,1513231883.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:24.101Z,1513231884.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:24.132Z,1513231884.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:24.501Z,1513231884.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:24.528Z,1513231884.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:24.932Z,1513231884.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:24.958Z,1513231884.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:25.274Z,1513231885.274 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:11:25.314Z,1513231885.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:25.335Z,1513231885.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:25.700Z,1513231885.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:25.719Z,1513231885.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:26.117Z,1513231886.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:26.132Z,1513231886.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:26.518Z,1513231886.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:26.538Z,1513231886.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:26.899Z,1513231886.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:27.027Z,1513231887.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:27.328Z,1513231887.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:27.436Z,1513231887.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:27.692Z,1513231887.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:27.725Z,1513231887.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:28.110Z,1513231888.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:28.167Z,1513231888.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:28.513Z,1513231888.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:28.535Z,1513231888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:28.948Z,1513231888.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:29.074Z,1513231889.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:29.297Z,1513231889.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:29.351Z,1513231889.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:29.693Z,1513231889.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:29.741Z,1513231889.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:30.093Z,1513231890.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:30.139Z,1513231890.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:30.493Z,1513231890.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:30.533Z,1513231890.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:30.902Z,1513231890.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:30.928Z,1513231890.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:31.292Z,1513231891.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:31.334Z,1513231891.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:31.714Z,1513231891.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:31.759Z,1513231891.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:32.116Z,1513231892.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:32.176Z,1513231892.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:32.515Z,1513231892.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:32.551Z,1513231892.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:32.903Z,1513231892.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:32.959Z,1513231892.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:33.331Z,1513231893.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:33.380Z,1513231893.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:33.703Z,1513231893.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:33.726Z,1513231893.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:34.102Z,1513231894.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:34.183Z,1513231894.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:34.513Z,1513231894.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:34.539Z,1513231894.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:34.924Z,1513231894.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:34.963Z,1513231894.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:35.320Z,1513231895.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:35.339Z,1513231895.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:35.696Z,1513231895.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:35.731Z,1513231895.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:36.092Z,1513231896.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:36.140Z,1513231896.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:36.492Z,1513231896.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:36.539Z,1513231896.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:36.899Z,1513231896.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:36.920Z,1513231896.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:37.359Z,1513231897.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:37.423Z,1513231897.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:37.712Z,1513231897.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:37.735Z,1513231897.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:38.118Z,1513231898.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:38.162Z,1513231898.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:38.511Z,1513231898.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:38.528Z,1513231898.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:38.892Z,1513231898.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:38.907Z,1513231898.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:39.313Z,1513231899.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:39.359Z,1513231899.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:39.736Z,1513231899.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:39.812Z,1513231899.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:40.100Z,1513231900.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:40.123Z,1513231900.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:40.511Z,1513231900.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:40.546Z,1513231900.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:40.906Z,1513231900.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:40.921Z,1513231900.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:41.315Z,1513231901.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:41.330Z,1513231901.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:41.692Z,1513231901.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:41.719Z,1513231901.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:42.091Z,1513231902.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:42.126Z,1513231902.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:42.489Z,1513231902.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:42.522Z,1513231902.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:42.896Z,1513231902.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:42.986Z,1513231902.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:43.291Z,1513231903.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:43.323Z,1513231903.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:43.722Z,1513231903.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:43.779Z,1513231903.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:44.119Z,1513231904.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:44.134Z,1513231904.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:44.502Z,1513231904.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:44.528Z,1513231904.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:44.896Z,1513231904.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:44.926Z,1513231904.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:45.291Z,1513231905.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:45.311Z,1513231905.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:45.699Z,1513231905.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:45.714Z,1513231905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:46.095Z,1513231906.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:46.110Z,1513231906.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:46.509Z,1513231906.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:46.540Z,1513231906.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:46.906Z,1513231906.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:46.927Z,1513231906.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:47.316Z,1513231907.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:47.331Z,1513231907.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:47.691Z,1513231907.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:47.726Z,1513231907.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:48.091Z,1513231908.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:48.148Z,1513231908.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:48.495Z,1513231908.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:48.554Z,1513231908.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:48.896Z,1513231908.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:48.923Z,1513231908.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:49.294Z,1513231909.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:49.343Z,1513231909.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:49.705Z,1513231909.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:49.721Z,1513231909.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:50.135Z,1513231910.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:50.202Z,1513231910.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:50.517Z,1513231910.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:50.547Z,1513231910.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:50.902Z,1513231910.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:50.916Z,1513231910.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:51.295Z,1513231911.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:51.321Z,1513231911.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:51.700Z,1513231911.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:51.714Z,1513231911.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:52.101Z,1513231912.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:52.115Z,1513231912.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:52.514Z,1513231912.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:52.529Z,1513231912.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:52.910Z,1513231912.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:52.930Z,1513231912.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:53.347Z,1513231913.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:53.375Z,1513231913.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:53.691Z,1513231913.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:53.723Z,1513231913.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:54.105Z,1513231914.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:54.120Z,1513231914.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:54.490Z,1513231914.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:54.516Z,1513231914.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:54.907Z,1513231914.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:54.922Z,1513231914.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:55.291Z,1513231915.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:55.308Z,1513231915.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:11:55.328Z,1513231915.328 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T06:06:55.2Z
2017-12-14T06:11:55.328Z,1513231915.328 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:11:55.328Z,1513231915.328 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:11:55.705Z,1513231915.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:11:55.737Z,1513231915.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:20.150Z,1513231940.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:20.211Z,1513231940.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:23.487Z,1513231943.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:23.502Z,1513231943.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:23.589Z,1513231943.589 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0132.lzma
2017-12-14T06:12:23.614Z,1513231943.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:23.651Z,1513231943.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:23.971Z,1513231943.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:24.005Z,1513231944.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:24.348Z,1513231944.348 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0132.lzma.bak
2017-12-14T06:12:24.348Z,1513231944.348 [DataOverHttps](INFO): SBD MOMSN=5438021
2017-12-14T06:12:24.389Z,1513231944.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:24.433Z,1513231944.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:25.754Z,1513231945.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:25.769Z,1513231945.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:25.875Z,1513231945.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:25.915Z,1513231945.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:29.517Z,1513231949.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:29.541Z,1513231949.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:29.666Z,1513231949.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:29.700Z,1513231949.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:30.050Z,1513231950.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:30.068Z,1513231950.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:30.413Z,1513231950.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:30.444Z,1513231950.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:30.799Z,1513231950.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:30.840Z,1513231950.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:31.199Z,1513231951.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:31.286Z,1513231951.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:34.778Z,1513231954.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:34.810Z,1513231954.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:34.881Z,1513231954.881 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0133.lzma
2017-12-14T06:12:34.926Z,1513231954.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:34.955Z,1513231954.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:35.278Z,1513231955.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:35.346Z,1513231955.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:35.639Z,1513231955.639 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0133.lzma.bak
2017-12-14T06:12:35.639Z,1513231955.639 [DataOverHttps](INFO): SBD MOMSN=5438023
2017-12-14T06:12:35.663Z,1513231955.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:35.683Z,1513231955.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:36.772Z,1513231956.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:36.831Z,1513231956.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:36.834Z,1513231956.834 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:12:36.834Z,1513231956.834 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:12:36.835Z,1513231956.835 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:12:36.962Z,1513231956.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:37.008Z,1513231957.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:40.324Z,1513231960.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:40.340Z,1513231960.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:40.457Z,1513231960.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:40.483Z,1513231960.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:40.798Z,1513231960.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:40.861Z,1513231960.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:41.199Z,1513231961.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:41.223Z,1513231961.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:41.598Z,1513231961.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:41.621Z,1513231961.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:41.997Z,1513231961.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:42.041Z,1513231962.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:42.409Z,1513231962.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:42.437Z,1513231962.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:42.808Z,1513231962.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:42.824Z,1513231962.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:43.205Z,1513231963.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:43.224Z,1513231963.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:43.594Z,1513231963.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:43.630Z,1513231963.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:43.998Z,1513231963.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:44.020Z,1513231964.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:44.403Z,1513231964.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:44.419Z,1513231964.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:44.792Z,1513231964.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:44.859Z,1513231964.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:45.191Z,1513231965.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:45.218Z,1513231965.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:45.610Z,1513231965.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:45.628Z,1513231965.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:46.017Z,1513231966.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:46.032Z,1513231966.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:46.419Z,1513231966.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:46.435Z,1513231966.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:46.801Z,1513231966.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:46.831Z,1513231966.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:47.199Z,1513231967.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:47.233Z,1513231967.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:47.595Z,1513231967.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:47.651Z,1513231967.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:47.998Z,1513231967.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:48.021Z,1513231968.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:48.402Z,1513231968.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:48.435Z,1513231968.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:48.803Z,1513231968.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:48.832Z,1513231968.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:49.222Z,1513231969.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:49.238Z,1513231969.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:49.596Z,1513231969.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:49.623Z,1513231969.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:49.994Z,1513231969.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:50.030Z,1513231970.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:50.394Z,1513231970.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:50.433Z,1513231970.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:50.792Z,1513231970.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:50.814Z,1513231970.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:51.202Z,1513231971.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:51.218Z,1513231971.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:51.602Z,1513231971.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:51.646Z,1513231971.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:52.007Z,1513231972.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:52.043Z,1513231972.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:52.408Z,1513231972.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:52.423Z,1513231972.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:52.808Z,1513231972.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:52.908Z,1513231972.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:53.202Z,1513231973.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:53.230Z,1513231973.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:53.600Z,1513231973.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:53.624Z,1513231973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:54.007Z,1513231974.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:54.023Z,1513231974.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:54.416Z,1513231974.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:54.436Z,1513231974.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:54.810Z,1513231974.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:54.855Z,1513231974.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:55.214Z,1513231975.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:55.222Z,1513231975.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x51688 got:0x15670
2017-12-14T06:12:55.254Z,1513231975.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:55.602Z,1513231975.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:55.694Z,1513231975.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:55.983Z,1513231975.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:56.022Z,1513231976.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:56.391Z,1513231976.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:56.460Z,1513231976.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:56.788Z,1513231976.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:56.855Z,1513231976.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:57.202Z,1513231977.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:57.251Z,1513231977.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:57.608Z,1513231977.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:57.638Z,1513231977.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:58.002Z,1513231978.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:58.044Z,1513231978.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:58.403Z,1513231978.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:58.436Z,1513231978.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:58.807Z,1513231978.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:58.846Z,1513231978.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:59.201Z,1513231979.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:59.215Z,1513231979.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:59.598Z,1513231979.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:12:59.706Z,1513231979.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:59.706Z,1513231979.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2017-12-14T06:12:59.706Z,1513231979.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:12:59.708Z,1513231979.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:59.708Z,1513231979.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114
2017-12-14T06:12:59.708Z,1513231979.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:12:59.714Z,1513231979.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:12:59.714Z,1513231979.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2017-12-14T06:12:59.714Z,1513231979.714 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:12:59.755Z,1513231979.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:12:59.755Z,1513231979.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:12:59.756Z,1513231979.756 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:13:00.035Z,1513231980.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:00.116Z,1513231980.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:13:00.116Z,1513231980.116 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2017-12-14T06:13:00.117Z,1513231980.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:13:00.117Z,1513231980.117 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114
2017-12-14T06:13:00.117Z,1513231980.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:13:00.117Z,1513231980.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2017-12-14T06:13:00.407Z,1513231980.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:00.421Z,1513231980.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:13:00.421Z,1513231980.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:13:00.421Z,1513231980.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:13:00.422Z,1513231980.422 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:13:00.422Z,1513231980.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:13:00.422Z,1513231980.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:13:00.423Z,1513231980.423 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:13:00.423Z,1513231980.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:13:00.424Z,1513231980.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:13:00.819Z,1513231980.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:00.833Z,1513231980.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:01.209Z,1513231981.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:01.250Z,1513231981.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:01.583Z,1513231981.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:01.620Z,1513231981.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:01.997Z,1513231981.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:02.026Z,1513231982.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:02.430Z,1513231982.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:02.451Z,1513231982.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:02.796Z,1513231982.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:02.829Z,1513231982.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:03.223Z,1513231983.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:03.332Z,1513231983.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:03.614Z,1513231983.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:03.628Z,1513231983.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:04.016Z,1513231984.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:04.031Z,1513231984.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:04.421Z,1513231984.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:04.439Z,1513231984.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:04.792Z,1513231984.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:04.824Z,1513231984.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:05.183Z,1513231985.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:05.222Z,1513231985.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:05.607Z,1513231985.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:05.666Z,1513231985.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:05.987Z,1513231985.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:06.025Z,1513231986.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:06.421Z,1513231986.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:06.443Z,1513231986.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:06.816Z,1513231986.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:06.835Z,1513231986.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:07.205Z,1513231987.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:07.232Z,1513231987.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:07.587Z,1513231987.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:07.637Z,1513231987.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:07.987Z,1513231987.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:08.024Z,1513231988.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:08.395Z,1513231988.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:08.428Z,1513231988.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:08.830Z,1513231988.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:08.851Z,1513231988.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:09.192Z,1513231989.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:09.231Z,1513231989.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:09.646Z,1513231989.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:09.701Z,1513231989.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:10.020Z,1513231990.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:10.045Z,1513231990.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:10.411Z,1513231990.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:10.467Z,1513231990.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:10.803Z,1513231990.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:10.867Z,1513231990.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:11.191Z,1513231991.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:11.219Z,1513231991.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:11.599Z,1513231991.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:11.623Z,1513231991.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:11.000Z,1513231992.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:12.047Z,1513231992.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:12.457Z,1513231992.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:12.472Z,1513231992.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:12.816Z,1513231992.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:12.902Z,1513231992.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:13.210Z,1513231993.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:13.232Z,1513231993.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:13.590Z,1513231993.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:13.620Z,1513231993.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:13.991Z,1513231993.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:14.035Z,1513231994.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:14.388Z,1513231994.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:14.425Z,1513231994.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:14.797Z,1513231994.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:14.823Z,1513231994.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:15.214Z,1513231995.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:15.234Z,1513231995.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:15.598Z,1513231995.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:15.637Z,1513231995.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:16.042Z,1513231996.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:16.061Z,1513231996.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:16.414Z,1513231996.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:16.443Z,1513231996.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:16.799Z,1513231996.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:16.853Z,1513231996.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:17.197Z,1513231997.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:17.241Z,1513231997.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:17.597Z,1513231997.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:17.619Z,1513231997.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:17.999Z,1513231997.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:18.018Z,1513231998.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:18.407Z,1513231998.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:18.422Z,1513231998.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:18.802Z,1513231998.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:18.842Z,1513231998.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:19.241Z,1513231999.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:19.260Z,1513231999.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:19.592Z,1513231999.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:19.615Z,1513231999.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:20.005Z,1513232000.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:20.024Z,1513232000.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:20.395Z,1513232000.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:20.474Z,1513232000.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:20.797Z,1513232000.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:20.817Z,1513232000.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:21.194Z,1513232001.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:21.251Z,1513232001.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:21.626Z,1513232001.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:21.650Z,1513232001.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:22.006Z,1513232002.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:22.046Z,1513232002.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:22.432Z,1513232002.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:22.473Z,1513232002.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:22.787Z,1513232002.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:22.827Z,1513232002.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:23.213Z,1513232003.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:23.228Z,1513232003.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:23.592Z,1513232003.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:23.630Z,1513232003.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:23.987Z,1513232003.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:24.040Z,1513232004.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:24.412Z,1513232004.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:24.443Z,1513232004.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:24.806Z,1513232004.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:24.827Z,1513232004.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:25.210Z,1513232005.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:25.251Z,1513232005.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:25.596Z,1513232005.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:25.636Z,1513232005.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:26.002Z,1513232006.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:26.019Z,1513232006.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:26.400Z,1513232006.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:26.420Z,1513232006.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:26.796Z,1513232006.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:26.842Z,1513232006.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:27.200Z,1513232007.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:27.223Z,1513232007.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:27.611Z,1513232007.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:27.631Z,1513232007.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:28.018Z,1513232008.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:28.032Z,1513232008.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:28.406Z,1513232008.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:28.443Z,1513232008.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:28.802Z,1513232008.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:28.851Z,1513232008.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:29.187Z,1513232009.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:29.231Z,1513232009.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:29.595Z,1513232009.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:29.626Z,1513232009.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:29.987Z,1513232009.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:30.037Z,1513232010.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:30.423Z,1513232010.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:30.438Z,1513232010.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:30.816Z,1513232010.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:30.848Z,1513232010.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:31.214Z,1513232011.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:31.234Z,1513232011.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:31.587Z,1513232011.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:31.631Z,1513232011.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:31.991Z,1513232011.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:32.035Z,1513232012.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:32.394Z,1513232012.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:32.424Z,1513232012.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:32.818Z,1513232012.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:32.898Z,1513232012.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:33.191Z,1513232013.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:33.266Z,1513232013.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:33.616Z,1513232013.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:33.649Z,1513232013.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:34.016Z,1513232014.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:34.059Z,1513232014.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:34.418Z,1513232014.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:34.432Z,1513232014.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:34.798Z,1513232014.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:34.860Z,1513232014.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:35.245Z,1513232015.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:35.280Z,1513232015.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:35.606Z,1513232015.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:35.626Z,1513232015.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:36.007Z,1513232016.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:36.023Z,1513232016.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:36.411Z,1513232016.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:36.452Z,1513232016.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:36.814Z,1513232016.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:36.822Z,1513232016.822 [PNI_TCM](ERROR): CRC does not match. Expected:0x44782 got:0x7490
2017-12-14T06:13:36.857Z,1513232016.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:37.220Z,1513232017.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:37.251Z,1513232017.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:40.877Z,1513232020.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:40.911Z,1513232020.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:41.007Z,1513232021.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:41.049Z,1513232021.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:41.374Z,1513232021.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:41.388Z,1513232021.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:41.777Z,1513232021.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:41.792Z,1513232021.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:42.182Z,1513232022.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:42.213Z,1513232022.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:42.567Z,1513232022.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:42.672Z,1513232022.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:42.972Z,1513232022.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:43.034Z,1513232023.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:43.372Z,1513232023.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:43.395Z,1513232023.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:43.773Z,1513232023.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:43.788Z,1513232023.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:44.173Z,1513232024.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:44.188Z,1513232024.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:44.578Z,1513232024.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:44.599Z,1513232024.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:44.978Z,1513232024.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:45.031Z,1513232025.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:45.377Z,1513232025.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:45.392Z,1513232025.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:45.768Z,1513232025.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:45.787Z,1513232025.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:46.170Z,1513232026.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:46.185Z,1513232026.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:46.575Z,1513232026.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:46.589Z,1513232026.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:47.004Z,1513232027.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:47.043Z,1513232027.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:47.381Z,1513232027.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:47.396Z,1513232027.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:47.781Z,1513232027.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:47.795Z,1513232027.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:48.188Z,1513232028.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:48.223Z,1513232028.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:48.573Z,1513232028.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:48.587Z,1513232028.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:49.012Z,1513232029.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:49.043Z,1513232029.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:49.359Z,1513232029.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:49.395Z,1513232029.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:49.761Z,1513232029.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:49.786Z,1513232029.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:50.159Z,1513232030.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:50.191Z,1513232030.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:50.610Z,1513232030.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:50.656Z,1513232030.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:50.984Z,1513232030.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:51.010Z,1513232031.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:51.399Z,1513232031.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:51.440Z,1513232031.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:51.759Z,1513232031.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:51.791Z,1513232031.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:52.159Z,1513232032.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:52.186Z,1513232032.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:52.564Z,1513232032.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:52.647Z,1513232032.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:52.971Z,1513232032.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:52.986Z,1513232032.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:53.381Z,1513232033.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:53.408Z,1513232033.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:53.782Z,1513232033.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:53.817Z,1513232033.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:54.182Z,1513232034.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:54.216Z,1513232034.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:54.642Z,1513232034.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:54.686Z,1513232034.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:54.955Z,1513232034.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:55.060Z,1513232035.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:55.363Z,1513232035.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:55.396Z,1513232035.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:55.761Z,1513232035.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:55.826Z,1513232035.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:56.156Z,1513232036.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:56.172Z,1513232036.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:56.601Z,1513232036.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:56.706Z,1513232036.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:56.981Z,1513232036.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:57.011Z,1513232037.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:57.377Z,1513232037.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:57.424Z,1513232037.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:57.771Z,1513232037.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:57.811Z,1513232037.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:58.167Z,1513232038.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:58.187Z,1513232038.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:58.572Z,1513232038.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:58.587Z,1513232038.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:58.959Z,1513232038.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:58.990Z,1513232038.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:59.378Z,1513232039.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:59.392Z,1513232039.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:13:59.783Z,1513232039.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:13:59.797Z,1513232039.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:00.186Z,1513232040.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:00.201Z,1513232040.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:00.559Z,1513232040.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:00.587Z,1513232040.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:01.046Z,1513232041.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:01.086Z,1513232041.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:01.365Z,1513232041.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:01.380Z,1513232041.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:01.766Z,1513232041.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:01.781Z,1513232041.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:02.167Z,1513232042.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:02.181Z,1513232042.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:02.577Z,1513232042.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:02.603Z,1513232042.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:03.015Z,1513232043.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:03.054Z,1513232043.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:03.377Z,1513232043.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:03.404Z,1513232043.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:03.763Z,1513232043.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:03.778Z,1513232043.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:04.163Z,1513232044.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:04.178Z,1513232044.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:04.569Z,1513232044.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:04.679Z,1513232044.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:04.969Z,1513232044.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:04.984Z,1513232044.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:05.382Z,1513232045.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:05.396Z,1513232045.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:05.778Z,1513232045.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:05.818Z,1513232045.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:06.174Z,1513232046.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:06.189Z,1513232046.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:06.567Z,1513232046.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:06.663Z,1513232046.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:06.959Z,1513232046.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:06.986Z,1513232046.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:07.388Z,1513232047.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:07.419Z,1513232047.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:07.760Z,1513232047.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:07.787Z,1513232047.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:08.159Z,1513232048.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:08.187Z,1513232048.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:08.599Z,1513232048.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:08.663Z,1513232048.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:08.985Z,1513232048.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:08.000Z,1513232049.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:09.382Z,1513232049.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:09.396Z,1513232049.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:09.760Z,1513232049.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:09.795Z,1513232049.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:10.163Z,1513232050.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:10.195Z,1513232050.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:10.560Z,1513232050.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:10.713Z,1513232050.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:10.984Z,1513232050.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:11.007Z,1513232051.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:11.384Z,1513232051.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:11.403Z,1513232051.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:11.783Z,1513232051.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:11.797Z,1513232051.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:12.182Z,1513232052.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:12.196Z,1513232052.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:12.559Z,1513232052.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:12.590Z,1513232052.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:13.000Z,1513232053.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:13.015Z,1513232053.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:13.364Z,1513232053.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:13.391Z,1513232053.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:13.760Z,1513232053.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:13.776Z,1513232053.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:14.169Z,1513232054.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:14.208Z,1513232054.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:14.582Z,1513232054.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:14.611Z,1513232054.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:15.021Z,1513232055.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:15.067Z,1513232055.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:15.377Z,1513232055.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:15.392Z,1513232055.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:15.771Z,1513232055.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:15.786Z,1513232055.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:16.171Z,1513232056.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:16.186Z,1513232056.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:16.570Z,1513232056.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:16.585Z,1513232056.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:17.042Z,1513232057.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:17.097Z,1513232057.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:17.379Z,1513232057.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:17.427Z,1513232057.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:17.783Z,1513232057.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:17.824Z,1513232057.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:18.174Z,1513232058.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:18.202Z,1513232058.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:18.569Z,1513232058.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:18.650Z,1513232058.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:18.968Z,1513232058.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:19.013Z,1513232059.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:19.359Z,1513232059.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:19.390Z,1513232059.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:19.772Z,1513232059.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:19.826Z,1513232059.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:20.171Z,1513232060.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:20.186Z,1513232060.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:20.587Z,1513232060.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:20.683Z,1513232060.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:20.984Z,1513232060.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:20.998Z,1513232060.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:21.386Z,1513232061.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:21.400Z,1513232061.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:21.756Z,1513232061.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:21.791Z,1513232061.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:22.171Z,1513232062.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:22.186Z,1513232062.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:22.559Z,1513232062.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:22.683Z,1513232062.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:22.954Z,1513232062.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:22.997Z,1513232062.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:23.408Z,1513232063.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:23.450Z,1513232063.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:23.782Z,1513232063.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:23.807Z,1513232063.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:24.182Z,1513232064.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:24.196Z,1513232064.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:24.559Z,1513232064.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:24.654Z,1513232064.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:24.965Z,1513232064.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:24.980Z,1513232064.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:25.360Z,1513232065.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:25.383Z,1513232065.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:25.765Z,1513232065.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:25.780Z,1513232065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:26.171Z,1513232066.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:26.186Z,1513232066.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:26.577Z,1513232066.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:26.612Z,1513232066.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:26.989Z,1513232066.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:27.025Z,1513232067.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:27.378Z,1513232067.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:27.392Z,1513232067.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:27.767Z,1513232067.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:27.786Z,1513232067.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:28.166Z,1513232068.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:28.226Z,1513232068.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:28.562Z,1513232068.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:28.591Z,1513232068.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:29.004Z,1513232069.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:29.050Z,1513232069.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:29.377Z,1513232069.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:29.392Z,1513232069.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:29.442Z,1513232069.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:29.782Z,1513232069.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:29.823Z,1513232069.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:30.188Z,1513232070.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:30.202Z,1513232070.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:30.238Z,1513232070.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:30.564Z,1513232070.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:30.599Z,1513232070.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:31.016Z,1513232071.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:31.067Z,1513232071.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:31.361Z,1513232071.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:31.376Z,1513232071.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:31.766Z,1513232071.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:31.782Z,1513232071.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:32.167Z,1513232072.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:32.182Z,1513232072.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:32.570Z,1513232072.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:32.656Z,1513232072.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:32.992Z,1513232072.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:33.022Z,1513232073.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:33.377Z,1513232073.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:33.395Z,1513232073.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:33.761Z,1513232073.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:33.779Z,1513232073.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:34.168Z,1513232074.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:34.187Z,1513232074.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:34.570Z,1513232074.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:34.656Z,1513232074.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:34.961Z,1513232074.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:34.997Z,1513232074.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:35.384Z,1513232075.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:35.399Z,1513232075.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:35.782Z,1513232075.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:35.803Z,1513232075.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:36.197Z,1513232076.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:36.245Z,1513232076.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:36.559Z,1513232076.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:36.575Z,1513232076.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:36.970Z,1513232076.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:36.985Z,1513232076.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:37.366Z,1513232077.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:37.386Z,1513232077.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:40.907Z,1513232080.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:40.977Z,1513232080.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:41.088Z,1513232081.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:41.127Z,1513232081.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:41.475Z,1513232081.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:41.490Z,1513232081.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:41.879Z,1513232081.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:41.927Z,1513232081.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:42.273Z,1513232082.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:42.288Z,1513232082.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:42.650Z,1513232082.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:42.719Z,1513232082.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:43.048Z,1513232083.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:43.080Z,1513232083.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:43.451Z,1513232083.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:43.485Z,1513232083.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:43.848Z,1513232083.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:43.878Z,1513232083.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:44.252Z,1513232084.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:44.290Z,1513232084.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:44.657Z,1513232084.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:44.685Z,1513232084.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:45.082Z,1513232085.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:45.096Z,1513232085.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:45.462Z,1513232085.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:45.495Z,1513232085.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:45.847Z,1513232085.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:45.863Z,1513232085.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:46.254Z,1513232086.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:46.285Z,1513232086.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:46.690Z,1513232086.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:46.705Z,1513232086.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:47.054Z,1513232087.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:47.068Z,1513232087.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:47.469Z,1513232087.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:47.496Z,1513232087.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:47.873Z,1513232087.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:47.898Z,1513232087.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:48.263Z,1513232088.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:48.293Z,1513232088.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:48.669Z,1513232088.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:48.699Z,1513232088.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:49.066Z,1513232089.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:49.103Z,1513232089.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:49.457Z,1513232089.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:49.472Z,1513232089.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:49.860Z,1513232089.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:49.879Z,1513232089.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:50.260Z,1513232090.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:50.274Z,1513232090.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:50.681Z,1513232090.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:50.747Z,1513232090.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:51.064Z,1513232091.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:51.084Z,1513232091.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:51.529Z,1513232091.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:51.563Z,1513232091.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:51.859Z,1513232091.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:51.874Z,1513232091.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:52.259Z,1513232092.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:52.275Z,1513232092.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:52.663Z,1513232092.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:52.688Z,1513232092.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:53.051Z,1513232093.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:53.068Z,1513232093.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:53.469Z,1513232093.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:53.499Z,1513232093.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:53.869Z,1513232093.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:53.894Z,1513232093.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:54.265Z,1513232094.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:54.291Z,1513232094.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:54.711Z,1513232094.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:54.755Z,1513232094.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:55.084Z,1513232095.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:55.123Z,1513232095.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:55.444Z,1513232095.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:55.470Z,1513232095.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:55.847Z,1513232095.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:55.878Z,1513232095.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:56.261Z,1513232096.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:56.275Z,1513232096.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:56.660Z,1513232096.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:56.683Z,1513232096.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:57.070Z,1513232097.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:57.091Z,1513232097.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:57.474Z,1513232097.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:57.495Z,1513232097.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:57.847Z,1513232097.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:57.884Z,1513232097.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:58.266Z,1513232098.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:58.302Z,1513232098.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:58.648Z,1513232098.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:58.683Z,1513232098.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:59.059Z,1513232099.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:59.091Z,1513232099.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:59.458Z,1513232099.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:59.495Z,1513232099.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:14:59.877Z,1513232099.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:14:59.899Z,1513232099.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:00.258Z,1513232100.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:00.285Z,1513232100.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:00.675Z,1513232100.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:00.710Z,1513232100.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:01.058Z,1513232101.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:01.085Z,1513232101.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:01.507Z,1513232101.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:01.532Z,1513232101.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:01.867Z,1513232101.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:01.882Z,1513232101.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:02.266Z,1513232102.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:02.334Z,1513232102.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:02.676Z,1513232102.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:02.743Z,1513232102.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:03.070Z,1513232103.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:03.100Z,1513232103.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:03.448Z,1513232103.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:03.476Z,1513232103.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:03.849Z,1513232103.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:03.915Z,1513232103.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:04.247Z,1513232104.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:04.279Z,1513232104.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:04.699Z,1513232104.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:04.751Z,1513232104.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:05.077Z,1513232105.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:05.101Z,1513232105.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:05.471Z,1513232105.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:05.491Z,1513232105.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:05.851Z,1513232105.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:05.878Z,1513232105.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:06.252Z,1513232106.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:06.279Z,1513232106.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:06.683Z,1513232106.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:06.703Z,1513232106.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:07.047Z,1513232107.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:07.070Z,1513232107.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:07.457Z,1513232107.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:07.492Z,1513232107.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:07.894Z,1513232107.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:07.951Z,1513232107.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:08.265Z,1513232108.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:08.288Z,1513232108.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:08.692Z,1513232108.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:08.772Z,1513232108.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:09.058Z,1513232109.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:09.091Z,1513232109.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:09.449Z,1513232109.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:09.464Z,1513232109.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:09.854Z,1513232109.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:09.869Z,1513232109.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:10.255Z,1513232110.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:10.269Z,1513232110.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:10.669Z,1513232110.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:10.698Z,1513232110.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:11.092Z,1513232111.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:11.115Z,1513232111.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:11.474Z,1513232111.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:11.503Z,1513232111.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:11.855Z,1513232111.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:11.869Z,1513232111.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:12.248Z,1513232112.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:12.271Z,1513232112.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:12.661Z,1513232112.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:12.675Z,1513232112.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:13.062Z,1513232113.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:13.118Z,1513232113.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:13.465Z,1513232113.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:13.481Z,1513232113.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:13.864Z,1513232113.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:13.879Z,1513232113.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:14.286Z,1513232114.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:14.307Z,1513232114.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:14.670Z,1513232114.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:14.709Z,1513232114.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:15.051Z,1513232115.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:15.087Z,1513232115.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:15.460Z,1513232115.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:15.475Z,1513232115.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:15.845Z,1513232115.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:15.879Z,1513232115.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:16.246Z,1513232116.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:16.273Z,1513232116.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:16.690Z,1513232116.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:16.722Z,1513232116.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:17.074Z,1513232117.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:17.089Z,1513232117.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:17.487Z,1513232117.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:17.523Z,1513232117.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:17.847Z,1513232117.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:17.883Z,1513232117.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:18.244Z,1513232118.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:18.275Z,1513232118.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:18.694Z,1513232118.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:18.722Z,1513232118.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:19.052Z,1513232119.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:19.075Z,1513232119.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:19.462Z,1513232119.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:19.490Z,1513232119.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:19.862Z,1513232119.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:19.895Z,1513232119.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:20.265Z,1513232120.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:20.295Z,1513232120.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:20.709Z,1513232120.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:20.757Z,1513232120.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:21.054Z,1513232121.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:21.077Z,1513232121.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:21.461Z,1513232121.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:21.476Z,1513232121.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:21.855Z,1513232121.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:21.878Z,1513232121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:22.259Z,1513232122.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:22.283Z,1513232122.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:22.707Z,1513232122.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:22.747Z,1513232122.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:23.066Z,1513232123.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:23.097Z,1513232123.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:23.470Z,1513232123.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:23.495Z,1513232123.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:23.853Z,1513232123.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:23.868Z,1513232123.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:24.255Z,1513232124.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:24.270Z,1513232124.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:24.655Z,1513232124.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:24.669Z,1513232124.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:25.055Z,1513232125.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:25.123Z,1513232125.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:25.467Z,1513232125.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:25.487Z,1513232125.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:25.866Z,1513232125.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:25.880Z,1513232125.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:26.271Z,1513232126.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:26.319Z,1513232126.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:26.644Z,1513232126.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:26.673Z,1513232126.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:27.092Z,1513232127.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:27.143Z,1513232127.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:27.447Z,1513232127.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:27.473Z,1513232127.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:27.848Z,1513232127.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:27.883Z,1513232127.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:28.260Z,1513232128.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:28.275Z,1513232128.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:28.686Z,1513232128.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:28.716Z,1513232128.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:29.070Z,1513232129.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:29.091Z,1513232129.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:29.462Z,1513232129.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:29.488Z,1513232129.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:29.851Z,1513232129.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:29.878Z,1513232129.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:30.247Z,1513232130.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:30.392Z,1513232130.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:30.684Z,1513232130.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:30.703Z,1513232130.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:31.062Z,1513232131.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:31.084Z,1513232131.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:31.466Z,1513232131.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:31.491Z,1513232131.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:31.869Z,1513232131.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:31.894Z,1513232131.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:32.269Z,1513232132.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:32.296Z,1513232132.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:32.683Z,1513232132.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:32.706Z,1513232132.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:33.055Z,1513232133.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:33.082Z,1513232133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:33.458Z,1513232133.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:33.473Z,1513232133.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:33.855Z,1513232133.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:33.871Z,1513232133.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:34.257Z,1513232134.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:34.271Z,1513232134.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:34.693Z,1513232134.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:34.710Z,1513232134.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:35.064Z,1513232135.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:35.079Z,1513232135.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:35.470Z,1513232135.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:35.523Z,1513232135.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:35.858Z,1513232135.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:35.872Z,1513232135.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:36.257Z,1513232136.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:36.272Z,1513232136.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:36.729Z,1513232136.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:36.760Z,1513232136.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:37.080Z,1513232137.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:37.095Z,1513232137.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:37.470Z,1513232137.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:37.490Z,1513232137.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:40.862Z,1513232140.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:40.895Z,1513232140.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:41.038Z,1513232141.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:41.090Z,1513232141.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:41.356Z,1513232141.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:41.372Z,1513232141.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:41.761Z,1513232141.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:41.776Z,1513232141.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:42.143Z,1513232142.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:42.175Z,1513232142.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:42.566Z,1513232142.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:42.655Z,1513232142.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:42.968Z,1513232142.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:42.987Z,1513232142.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:43.362Z,1513232143.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:43.382Z,1513232143.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:43.743Z,1513232143.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:43.780Z,1513232143.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:44.143Z,1513232144.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:44.174Z,1513232144.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:44.548Z,1513232144.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:44.628Z,1513232144.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:44.947Z,1513232144.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:44.991Z,1513232144.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:45.361Z,1513232145.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:45.389Z,1513232145.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:45.763Z,1513232145.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:45.790Z,1513232145.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:46.153Z,1513232146.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:46.191Z,1513232146.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:46.552Z,1513232146.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:46.571Z,1513232146.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:46.943Z,1513232146.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:46.975Z,1513232146.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:47.370Z,1513232147.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:47.439Z,1513232147.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:47.769Z,1513232147.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:47.820Z,1513232147.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:48.166Z,1513232148.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:48.185Z,1513232148.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:48.543Z,1513232148.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:48.604Z,1513232148.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:48.959Z,1513232148.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:48.995Z,1513232148.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:49.396Z,1513232149.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:49.455Z,1513232149.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:49.765Z,1513232149.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:49.796Z,1513232149.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:50.162Z,1513232150.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:50.199Z,1513232150.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:50.551Z,1513232150.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:50.567Z,1513232150.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:50.952Z,1513232150.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:50.971Z,1513232150.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:51.361Z,1513232151.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:51.376Z,1513232151.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:51.765Z,1513232151.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:51.780Z,1513232151.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:52.158Z,1513232152.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:52.172Z,1513232152.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:52.591Z,1513232152.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:52.626Z,1513232152.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:53.007Z,1513232153.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:53.047Z,1513232153.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:53.366Z,1513232153.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:53.382Z,1513232153.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:53.766Z,1513232153.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:53.781Z,1513232153.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:54.167Z,1513232154.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:54.181Z,1513232154.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:54.552Z,1513232154.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:54.578Z,1513232154.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:55.014Z,1513232155.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:55.036Z,1513232155.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:55.366Z,1513232155.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:55.380Z,1513232155.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:55.787Z,1513232155.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:55.831Z,1513232155.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:56.156Z,1513232156.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:56.182Z,1513232156.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:56.549Z,1513232156.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:56.653Z,1513232156.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:56.948Z,1513232156.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:56.964Z,1513232156.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:57.365Z,1513232157.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:57.390Z,1513232157.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:57.761Z,1513232157.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:57.792Z,1513232157.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:58.162Z,1513232158.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:58.188Z,1513232158.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:58.553Z,1513232158.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:58.653Z,1513232158.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:59.020Z,1513232159.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:59.072Z,1513232159.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:59.353Z,1513232159.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:59.387Z,1513232159.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:15:59.766Z,1513232159.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:15:59.788Z,1513232159.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:00.166Z,1513232160.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:00.180Z,1513232160.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:00.544Z,1513232160.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:00.631Z,1513232160.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:00.631Z,1513232160.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2017-12-14T06:16:00.631Z,1513232160.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:16:00.646Z,1513232160.646 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:00.646Z,1513232160.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115
2017-12-14T06:16:00.646Z,1513232160.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:16:00.648Z,1513232160.648 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:00.648Z,1513232160.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2017-12-14T06:16:00.648Z,1513232160.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:16:00.687Z,1513232160.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:16:00.687Z,1513232160.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:16:00.687Z,1513232160.687 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:16:00.948Z,1513232160.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:00.984Z,1513232160.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:16:00.985Z,1513232160.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2017-12-14T06:16:00.985Z,1513232160.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:16:00.985Z,1513232160.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115
2017-12-14T06:16:00.986Z,1513232160.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:16:00.986Z,1513232160.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2017-12-14T06:16:01.362Z,1513232161.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:01.390Z,1513232161.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:16:01.390Z,1513232161.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:16:01.391Z,1513232161.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:16:01.391Z,1513232161.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:16:01.391Z,1513232161.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:16:01.392Z,1513232161.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:16:01.392Z,1513232161.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:16:01.397Z,1513232161.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:16:01.397Z,1513232161.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:16:01.767Z,1513232161.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:01.782Z,1513232161.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:02.166Z,1513232162.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:02.237Z,1513232162.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:02.556Z,1513232162.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:02.638Z,1513232162.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:02.947Z,1513232162.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:02.979Z,1513232162.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:03.364Z,1513232163.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:03.384Z,1513232163.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:03.761Z,1513232163.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:03.782Z,1513232163.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:04.157Z,1513232164.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:04.188Z,1513232164.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:04.548Z,1513232164.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:04.575Z,1513232164.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:04.954Z,1513232164.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:04.969Z,1513232164.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:05.366Z,1513232165.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:05.420Z,1513232165.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:05.798Z,1513232165.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:05.819Z,1513232165.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:06.166Z,1513232166.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:06.197Z,1513232166.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:06.563Z,1513232166.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:06.595Z,1513232166.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:07.015Z,1513232167.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:07.052Z,1513232167.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:07.356Z,1513232167.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:07.376Z,1513232167.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:07.758Z,1513232167.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:07.773Z,1513232167.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:08.161Z,1513232168.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:08.177Z,1513232168.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:08.557Z,1513232168.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:08.572Z,1513232168.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:09.040Z,1513232169.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:09.094Z,1513232169.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:09.367Z,1513232169.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:09.382Z,1513232169.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:09.771Z,1513232169.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:09.787Z,1513232169.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:10.171Z,1513232170.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:10.187Z,1513232170.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:10.544Z,1513232170.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:10.646Z,1513232170.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:10.977Z,1513232170.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:11.051Z,1513232171.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:11.362Z,1513232171.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:11.386Z,1513232171.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:11.761Z,1513232171.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:11.787Z,1513232171.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:12.162Z,1513232172.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:12.259Z,1513232172.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:12.560Z,1513232172.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:12.674Z,1513232172.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:12.952Z,1513232172.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:12.996Z,1513232172.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:13.354Z,1513232173.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:13.370Z,1513232173.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:13.766Z,1513232173.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:13.796Z,1513232173.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:14.157Z,1513232174.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:14.171Z,1513232174.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:14.551Z,1513232174.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:14.566Z,1513232174.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:14.945Z,1513232174.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:14.972Z,1513232174.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:15.366Z,1513232175.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:15.435Z,1513232175.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:15.765Z,1513232175.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:15.781Z,1513232175.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:16.160Z,1513232176.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:16.179Z,1513232176.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:16.544Z,1513232176.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:16.571Z,1513232176.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:16.944Z,1513232176.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:16.979Z,1513232176.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:17.354Z,1513232177.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:17.383Z,1513232177.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:17.772Z,1513232177.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:17.786Z,1513232177.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:18.153Z,1513232178.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:18.183Z,1513232178.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:18.548Z,1513232178.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:18.579Z,1513232178.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:18.957Z,1513232178.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:18.972Z,1513232178.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:19.358Z,1513232179.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:19.373Z,1513232179.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:19.791Z,1513232179.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:19.815Z,1513232179.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:20.164Z,1513232180.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:20.178Z,1513232180.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:20.554Z,1513232180.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:20.569Z,1513232180.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:21.017Z,1513232181.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:21.083Z,1513232181.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:21.360Z,1513232181.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:21.426Z,1513232181.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:21.756Z,1513232181.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:21.825Z,1513232181.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:22.167Z,1513232182.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:22.195Z,1513232182.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:22.545Z,1513232182.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:22.592Z,1513232182.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:23.028Z,1513232183.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:23.093Z,1513232183.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:23.384Z,1513232183.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:23.427Z,1513232183.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:23.784Z,1513232183.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:23.840Z,1513232183.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:24.164Z,1513232184.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:24.195Z,1513232184.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:24.569Z,1513232184.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:24.683Z,1513232184.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:24.945Z,1513232184.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:24.983Z,1513232184.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:25.364Z,1513232185.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:25.427Z,1513232185.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:25.780Z,1513232185.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:25.832Z,1513232185.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:26.169Z,1513232186.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:26.218Z,1513232186.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:26.546Z,1513232186.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:26.600Z,1513232186.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:26.944Z,1513232186.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:26.975Z,1513232186.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:27.393Z,1513232187.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:27.408Z,1513232187.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:27.786Z,1513232187.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:27.891Z,1513232187.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:28.179Z,1513232188.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:28.196Z,1513232188.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:28.545Z,1513232188.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:28.627Z,1513232188.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:28.955Z,1513232188.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:28.999Z,1513232188.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:29.373Z,1513232189.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:29.388Z,1513232189.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:29.767Z,1513232189.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:29.792Z,1513232189.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:30.188Z,1513232190.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:30.203Z,1513232190.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:30.559Z,1513232190.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:30.674Z,1513232190.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:30.953Z,1513232190.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:31.003Z,1513232191.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:31.359Z,1513232191.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:31.379Z,1513232191.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:31.793Z,1513232191.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:31.850Z,1513232191.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:32.163Z,1513232192.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:32.183Z,1513232192.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:32.246Z,1513232192.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:32.563Z,1513232192.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:32.583Z,1513232192.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:32.967Z,1513232192.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:33.002Z,1513232193.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:33.042Z,1513232193.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:33.359Z,1513232193.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:33.421Z,1513232193.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:33.445Z,1513232193.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:33.754Z,1513232193.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:33.783Z,1513232193.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:34.146Z,1513232194.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:34.231Z,1513232194.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:34.242Z,1513232194.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:34.549Z,1513232194.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:34.606Z,1513232194.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:35.014Z,1513232195.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:35.038Z,1513232195.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:35.112Z,1513232195.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:35.378Z,1513232195.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:35.433Z,1513232195.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:35.505Z,1513232195.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:35.759Z,1513232195.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:35.856Z,1513232195.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:36.158Z,1513232196.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:36.197Z,1513232196.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:36.302Z,1513232196.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:36.546Z,1513232196.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:36.585Z,1513232196.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:37.008Z,1513232197.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:37.037Z,1513232197.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:37.098Z,1513232197.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:37.364Z,1513232197.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:37.387Z,1513232197.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:37.502Z,1513232197.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:37.768Z,1513232197.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:37.791Z,1513232197.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:43.882Z,1513232203.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:43.891Z,1513232203.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:43.948Z,1513232203.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:44.040Z,1513232204.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:44.056Z,1513232204.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:44.407Z,1513232204.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:44.428Z,1513232204.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:44.678Z,1513232204.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:44.827Z,1513232204.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:44.846Z,1513232204.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:45.082Z,1513232205.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:45.201Z,1513232205.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:45.238Z,1513232205.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:45.623Z,1513232205.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:45.647Z,1513232205.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:45.877Z,1513232205.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:46.020Z,1513232206.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:46.059Z,1513232206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:46.411Z,1513232206.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:46.435Z,1513232206.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:46.675Z,1513232206.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:46.811Z,1513232206.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:46.850Z,1513232206.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:47.101Z,1513232207.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:47.215Z,1513232207.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:47.230Z,1513232207.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:47.612Z,1513232207.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:47.627Z,1513232207.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:47.897Z,1513232207.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:48.006Z,1513232208.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:48.040Z,1513232208.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:48.416Z,1513232208.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:48.436Z,1513232208.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:48.696Z,1513232208.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:48.820Z,1513232208.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:48.839Z,1513232208.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:49.258Z,1513232209.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:49.285Z,1513232209.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:49.385Z,1513232209.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:49.606Z,1513232209.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:49.627Z,1513232209.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:49.996Z,1513232209.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:50.042Z,1513232210.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:50.181Z,1513232210.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:50.414Z,1513232210.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:50.421Z,1513232210.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:16:50.465Z,1513232210.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:50.812Z,1513232210.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:50.827Z,1513232210.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:50.978Z,1513232210.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:51.221Z,1513232211.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:51.236Z,1513232211.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:51.385Z,1513232211.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:51.624Z,1513232211.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:51.639Z,1513232211.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:52.027Z,1513232212.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:52.041Z,1513232212.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:52.181Z,1513232212.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:52.452Z,1513232212.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:52.480Z,1513232212.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:52.799Z,1513232212.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:52.826Z,1513232212.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:52.977Z,1513232212.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:53.223Z,1513232213.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:53.237Z,1513232213.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:53.381Z,1513232213.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:53.595Z,1513232213.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:53.631Z,1513232213.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:54.003Z,1513232214.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:54.035Z,1513232214.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:54.177Z,1513232214.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:54.410Z,1513232214.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:54.446Z,1513232214.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:54.840Z,1513232214.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:54.863Z,1513232214.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:54.973Z,1513232214.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:55.216Z,1513232215.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:55.242Z,1513232215.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:55.377Z,1513232215.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:55.607Z,1513232215.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:55.638Z,1513232215.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:56.016Z,1513232216.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:56.103Z,1513232216.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:56.174Z,1513232216.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:56.400Z,1513232216.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:56.446Z,1513232216.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:56.813Z,1513232216.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:56.859Z,1513232216.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:56.969Z,1513232216.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:57.211Z,1513232217.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:57.234Z,1513232217.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:57.373Z,1513232217.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:57.618Z,1513232217.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:57.664Z,1513232217.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:58.023Z,1513232218.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:58.046Z,1513232218.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:58.169Z,1513232218.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:58.416Z,1513232218.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:58.451Z,1513232218.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:58.844Z,1513232218.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:58.872Z,1513232218.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:58.965Z,1513232218.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:59.211Z,1513232219.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:59.231Z,1513232219.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:16:59.369Z,1513232219.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:59.609Z,1513232219.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:16:59.651Z,1513232219.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:00.010Z,1513232220.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:00.019Z,1513232220.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x63733 got:0x16897
2017-12-14T06:17:00.058Z,1513232220.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:00.165Z,1513232220.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:00.415Z,1513232220.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:00.430Z,1513232220.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:00.830Z,1513232220.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:00.852Z,1513232220.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:00.961Z,1513232220.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:01.230Z,1513232221.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:01.252Z,1513232221.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:01.365Z,1513232221.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:01.607Z,1513232221.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:01.626Z,1513232221.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:02.090Z,1513232222.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:02.137Z,1513232222.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:02.161Z,1513232222.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:02.425Z,1513232222.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:02.440Z,1513232222.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:02.801Z,1513232222.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:02.836Z,1513232222.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:02.959Z,1513232222.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:03.221Z,1513232223.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:03.244Z,1513232223.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:03.405Z,1513232223.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:03.614Z,1513232223.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:03.637Z,1513232223.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:04.019Z,1513232224.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:04.034Z,1513232224.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:04.201Z,1513232224.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:04.407Z,1513232224.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:04.441Z,1513232224.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:04.795Z,1513232224.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:04.838Z,1513232224.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:04.998Z,1513232224.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:05.196Z,1513232225.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:05.251Z,1513232225.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:05.401Z,1513232225.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:05.623Z,1513232225.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:05.638Z,1513232225.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:05.999Z,1513232225.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:06.064Z,1513232226.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:06.197Z,1513232226.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:06.418Z,1513232226.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:06.449Z,1513232226.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:06.825Z,1513232226.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:06.840Z,1513232226.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:06.995Z,1513232226.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:07.207Z,1513232227.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:07.239Z,1513232227.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:07.401Z,1513232227.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:07.600Z,1513232227.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:07.645Z,1513232227.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:07.998Z,1513232227.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:08.034Z,1513232228.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:08.197Z,1513232228.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:08.447Z,1513232228.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:08.490Z,1513232228.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:08.807Z,1513232228.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:08.838Z,1513232228.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:08.993Z,1513232228.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:09.204Z,1513232229.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:09.243Z,1513232229.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:09.626Z,1513232229.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:09.647Z,1513232229.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:09.789Z,1513232229.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:10.053Z,1513232230.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:10.067Z,1513232230.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:10.408Z,1513232230.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:10.440Z,1513232230.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:10.587Z,1513232230.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:10.800Z,1513232230.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:10.847Z,1513232230.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:11.201Z,1513232231.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:11.239Z,1513232231.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:11.381Z,1513232231.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:11.607Z,1513232231.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:11.639Z,1513232231.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:12.014Z,1513232232.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:12.044Z,1513232232.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:12.180Z,1513232232.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:12.421Z,1513232232.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:12.446Z,1513232232.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:12.818Z,1513232232.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:12.847Z,1513232232.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:12.973Z,1513232232.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:13.217Z,1513232233.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:13.240Z,1513232233.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:13.611Z,1513232233.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:13.626Z,1513232233.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:13.769Z,1513232233.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:14.006Z,1513232234.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:14.046Z,1513232234.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:14.407Z,1513232234.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:14.427Z,1513232234.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:14.565Z,1513232234.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:14.820Z,1513232234.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:14.835Z,1513232234.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:15.211Z,1513232235.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:15.248Z,1513232235.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:15.361Z,1513232235.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:15.621Z,1513232235.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:15.647Z,1513232235.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:16.022Z,1513232236.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:16.051Z,1513232236.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:16.158Z,1513232236.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:16.422Z,1513232236.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:16.451Z,1513232236.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:16.807Z,1513232236.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:16.822Z,1513232236.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:16.955Z,1513232236.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:17.199Z,1513232237.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:17.238Z,1513232237.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:17.604Z,1513232237.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:17.638Z,1513232237.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:17.749Z,1513232237.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:18.022Z,1513232238.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:18.124Z,1513232238.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:18.416Z,1513232238.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:18.431Z,1513232238.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:18.548Z,1513232238.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:18.823Z,1513232238.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:18.875Z,1513232238.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:19.234Z,1513232239.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:19.249Z,1513232239.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:19.341Z,1513232239.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:19.597Z,1513232239.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:19.651Z,1513232239.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:19.000Z,1513232240.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:20.025Z,1513232240.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:20.137Z,1513232240.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:20.395Z,1513232240.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:20.431Z,1513232240.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:20.818Z,1513232240.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:20.843Z,1513232240.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:20.933Z,1513232240.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:21.201Z,1513232241.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:21.229Z,1513232241.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:21.639Z,1513232241.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:21.659Z,1513232241.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:21.729Z,1513232241.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:22.031Z,1513232242.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:22.046Z,1513232242.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:22.422Z,1513232242.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:22.442Z,1513232242.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:22.525Z,1513232242.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:22.824Z,1513232242.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:22.839Z,1513232242.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:23.203Z,1513232243.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:23.234Z,1513232243.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:23.321Z,1513232243.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:23.602Z,1513232243.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:23.640Z,1513232243.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:24.012Z,1513232244.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:24.047Z,1513232244.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:24.117Z,1513232244.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:24.456Z,1513232244.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:24.496Z,1513232244.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:24.811Z,1513232244.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:24.835Z,1513232244.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:24.913Z,1513232244.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:25.242Z,1513232245.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:25.257Z,1513232245.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:25.602Z,1513232245.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:25.631Z,1513232245.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:25.709Z,1513232245.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:25.999Z,1513232245.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:26.031Z,1513232246.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:26.416Z,1513232246.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:26.432Z,1513232246.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:26.505Z,1513232246.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:26.810Z,1513232246.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:26.832Z,1513232246.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:27.212Z,1513232247.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:27.227Z,1513232247.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:27.301Z,1513232247.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:27.622Z,1513232247.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:27.669Z,1513232247.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:28.009Z,1513232248.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:28.071Z,1513232248.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:28.097Z,1513232248.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:28.406Z,1513232248.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:28.451Z,1513232248.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:28.799Z,1513232248.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:28.846Z,1513232248.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:28.893Z,1513232248.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:29.207Z,1513232249.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:29.213Z,1513232249.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x60788 got:0x15880
2017-12-14T06:17:29.235Z,1513232249.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:29.604Z,1513232249.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:29.636Z,1513232249.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:29.689Z,1513232249.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.130Z,1513232250.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.171Z,1513232250.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:30.358Z,1513232250.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.425Z,1513232250.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.440Z,1513232250.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:30.761Z,1513232250.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.863Z,1513232250.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:30.944Z,1513232250.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:31.165Z,1513232251.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:31.220Z,1513232251.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:31.250Z,1513232251.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:31.569Z,1513232251.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:31.592Z,1513232251.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:31.634Z,1513232251.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:31.973Z,1513232251.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.008Z,1513232252.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.044Z,1513232252.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:32.377Z,1513232252.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.411Z,1513232252.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.438Z,1513232252.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:32.782Z,1513232252.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.814Z,1513232252.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:32.837Z,1513232252.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:33.190Z,1513232253.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:33.198Z,1513232253.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:33.246Z,1513232253.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:33.593Z,1513232253.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:33.635Z,1513232253.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:33.651Z,1513232253.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:34.004Z,1513232254.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.027Z,1513232254.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.056Z,1513232254.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:34.407Z,1513232254.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.410Z,1513232254.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.451Z,1513232254.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:34.796Z,1513232254.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.816Z,1513232254.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:34.858Z,1513232254.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:35.203Z,1513232255.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:35.239Z,1513232255.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:35.241Z,1513232255.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:35.609Z,1513232255.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:35.641Z,1513232255.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:35.646Z,1513232255.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:36.003Z,1513232256.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:36.039Z,1513232256.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:36.409Z,1513232256.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:36.442Z,1513232256.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:36.443Z,1513232256.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:36.835Z,1513232256.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:36.855Z,1513232256.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:37.045Z,1513232257.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:37.243Z,1513232257.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:37.263Z,1513232257.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:37.303Z,1513232257.303 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:17:37.303Z,1513232257.303 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:17:37.303Z,1513232257.303 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:17:37.303Z,1513232257.303 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:17:37.603Z,1513232257.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:37.631Z,1513232257.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:37.639Z,1513232257.639 [Default:CheckIn:D] Stopped
2017-12-14T06:17:37.639Z,1513232257.639 [Default:CheckIn:E] Running Loop=1
2017-12-14T06:17:37.841Z,1513232257.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:38.007Z,1513232258.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:38.031Z,1513232258.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:38.036Z,1513232258.036 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 344.370801 min 
2017-12-14T06:17:38.036Z,1513232258.036 [Default:CheckIn:E] Stopped
2017-12-14T06:17:38.036Z,1513232258.036 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn] Stopped
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn](INFO): Running loop #34
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn] Running Loop=34
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T06:17:38.049Z,1513232258.049 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T06:17:38.638Z,1513232258.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:39.065Z,1513232259.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:39.861Z,1513232259.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:40.658Z,1513232260.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:41.073Z,1513232261.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:41.568Z,1513232261.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:41.575Z,1513232261.575 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.576Z,1513232261.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.576Z,1513232261.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.576Z,1513232261.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.577Z,1513232261.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.577Z,1513232261.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.577Z,1513232261.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.578Z,1513232261.578 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:17:41.691Z,1513232261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:41.783Z,1513232261.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:41.810Z,1513232261.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:41.869Z,1513232261.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:42.199Z,1513232262.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:42.260Z,1513232262.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:42.590Z,1513232262.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:42.616Z,1513232262.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:42.666Z,1513232262.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:42.978Z,1513232262.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:43.028Z,1513232263.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:43.125Z,1513232263.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:43.381Z,1513232263.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:43.396Z,1513232263.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:43.778Z,1513232263.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:43.822Z,1513232263.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:43.921Z,1513232263.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:44.175Z,1513232264.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:44.190Z,1513232264.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:44.589Z,1513232264.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:44.604Z,1513232264.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:44.717Z,1513232264.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:45.034Z,1513232265.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:45.052Z,1513232265.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:45.382Z,1513232265.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:45.396Z,1513232265.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:45.405Z,1513232265.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:45.775Z,1513232265.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:45.794Z,1513232265.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:46.175Z,1513232266.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:46.191Z,1513232266.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:46.201Z,1513232266.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:46.576Z,1513232266.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:46.591Z,1513232266.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:46.998Z,1513232266.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:47.016Z,1513232267.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:47.054Z,1513232267.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:47.394Z,1513232267.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:47.408Z,1513232267.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:47.442Z,1513232267.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:47.793Z,1513232267.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:47.808Z,1513232267.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:48.193Z,1513232268.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:48.215Z,1513232268.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:48.237Z,1513232268.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:48.567Z,1513232268.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:48.656Z,1513232268.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:48.975Z,1513232268.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:49.010Z,1513232269.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:49.033Z,1513232269.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:49.372Z,1513232269.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:49.387Z,1513232269.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:49.437Z,1513232269.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:49.776Z,1513232269.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:49.790Z,1513232269.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:50.177Z,1513232270.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:50.192Z,1513232270.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:50.233Z,1513232270.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:50.612Z,1513232270.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:50.673Z,1513232270.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:50.990Z,1513232270.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:51.004Z,1513232271.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:51.029Z,1513232271.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:51.384Z,1513232271.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:51.433Z,1513232271.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:51.436Z,1513232271.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:51.779Z,1513232271.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:51.794Z,1513232271.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:52.181Z,1513232272.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:52.195Z,1513232272.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:52.229Z,1513232272.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:52.608Z,1513232272.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:52.677Z,1513232272.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:52.976Z,1513232272.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:53.007Z,1513232273.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:53.026Z,1513232273.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:53.382Z,1513232273.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:53.409Z,1513232273.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:53.429Z,1513232273.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:53.777Z,1513232273.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:53.792Z,1513232273.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:54.185Z,1513232274.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:54.216Z,1513232274.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:54.225Z,1513232274.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:54.591Z,1513232274.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:54.680Z,1513232274.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:54.980Z,1513232274.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:54.995Z,1513232274.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:55.022Z,1513232275.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:55.367Z,1513232275.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:55.403Z,1513232275.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:55.425Z,1513232275.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:55.790Z,1513232275.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:55.805Z,1513232275.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:56.179Z,1513232276.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:56.215Z,1513232276.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:56.221Z,1513232276.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:56.586Z,1513232276.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:56.607Z,1513232276.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:56.981Z,1513232276.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:56.000Z,1513232277.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:57.017Z,1513232277.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:57.386Z,1513232277.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:57.416Z,1513232277.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:57.421Z,1513232277.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:57.772Z,1513232277.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:57.795Z,1513232277.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:58.167Z,1513232278.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:58.202Z,1513232278.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:58.217Z,1513232278.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:58.567Z,1513232278.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:58.594Z,1513232278.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:59.014Z,1513232279.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:59.015Z,1513232279.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:59.059Z,1513232279.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:59.408Z,1513232279.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:59.437Z,1513232279.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:59.468Z,1513232279.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:17:59.797Z,1513232279.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:17:59.812Z,1513232279.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:00.197Z,1513232280.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:00.212Z,1513232280.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:00.233Z,1513232280.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:00.573Z,1513232280.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:00.611Z,1513232280.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:01.018Z,1513232281.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:01.030Z,1513232281.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:01.039Z,1513232281.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:01.376Z,1513232281.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:01.391Z,1513232281.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:01.433Z,1513232281.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:01.773Z,1513232281.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:01.788Z,1513232281.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:02.176Z,1513232282.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:02.192Z,1513232282.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:02.229Z,1513232282.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:02.660Z,1513232282.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:02.700Z,1513232282.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:02.993Z,1513232282.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:03.015Z,1513232283.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:03.026Z,1513232283.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:03.393Z,1513232283.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:03.429Z,1513232283.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:03.478Z,1513232283.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:03.767Z,1513232283.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:03.803Z,1513232283.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:04.171Z,1513232284.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:04.219Z,1513232284.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:04.225Z,1513232284.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:04.598Z,1513232284.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:04.668Z,1513232284.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:04.974Z,1513232284.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:05.014Z,1513232285.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:05.022Z,1513232285.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:05.381Z,1513232285.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:05.396Z,1513232285.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:05.425Z,1513232285.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:05.782Z,1513232285.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:05.799Z,1513232285.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:06.186Z,1513232286.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:06.207Z,1513232286.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:06.221Z,1513232286.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:06.589Z,1513232286.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:06.680Z,1513232286.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:06.969Z,1513232286.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:06.987Z,1513232286.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:07.018Z,1513232287.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:07.370Z,1513232287.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:07.392Z,1513232287.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:07.421Z,1513232287.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:07.782Z,1513232287.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:07.803Z,1513232287.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:08.181Z,1513232288.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:08.196Z,1513232288.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:08.218Z,1513232288.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:08.635Z,1513232288.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:08.675Z,1513232288.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:09.014Z,1513232289.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:09.023Z,1513232289.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:09.073Z,1513232289.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:09.381Z,1513232289.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:09.399Z,1513232289.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:09.417Z,1513232289.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:09.779Z,1513232289.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:09.793Z,1513232289.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:10.180Z,1513232290.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:10.195Z,1513232290.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:10.213Z,1513232290.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:10.580Z,1513232290.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:10.595Z,1513232290.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:10.971Z,1513232290.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:10.985Z,1513232290.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:11.009Z,1513232291.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:11.382Z,1513232291.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:11.396Z,1513232291.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:11.413Z,1513232291.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:11.782Z,1513232291.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:11.845Z,1513232291.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:12.206Z,1513232292.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:12.209Z,1513232292.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:12.251Z,1513232292.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:12.577Z,1513232292.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:12.599Z,1513232292.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:13.006Z,1513232293.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:13.027Z,1513232293.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:13.091Z,1513232293.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:13.374Z,1513232293.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:13.389Z,1513232293.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:13.425Z,1513232293.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:13.777Z,1513232293.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:13.791Z,1513232293.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:14.178Z,1513232294.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:14.193Z,1513232294.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:14.222Z,1513232294.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:14.589Z,1513232294.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:14.620Z,1513232294.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:15.017Z,1513232295.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:15.018Z,1513232295.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:15.044Z,1513232295.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:15.407Z,1513232295.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:15.437Z,1513232295.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:15.447Z,1513232295.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:15.775Z,1513232295.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:15.795Z,1513232295.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:16.176Z,1513232296.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:16.195Z,1513232296.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:16.233Z,1513232296.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:16.614Z,1513232296.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:16.675Z,1513232296.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:16.968Z,1513232296.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:17.008Z,1513232297.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:17.029Z,1513232297.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:17.382Z,1513232297.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:17.416Z,1513232297.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:17.457Z,1513232297.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:17.777Z,1513232297.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:17.812Z,1513232297.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:18.177Z,1513232298.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:18.206Z,1513232298.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:18.253Z,1513232298.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:18.620Z,1513232298.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:18.665Z,1513232298.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:18.967Z,1513232298.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:18.994Z,1513232298.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:19.049Z,1513232299.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:19.367Z,1513232299.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:19.399Z,1513232299.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:19.453Z,1513232299.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:19.771Z,1513232299.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:19.798Z,1513232299.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:20.171Z,1513232300.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:20.196Z,1513232300.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:20.249Z,1513232300.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:20.620Z,1513232300.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:20.683Z,1513232300.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:20.989Z,1513232300.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:21.019Z,1513232301.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:21.066Z,1513232301.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:21.390Z,1513232301.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:21.419Z,1513232301.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:21.469Z,1513232301.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:21.779Z,1513232301.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:21.813Z,1513232301.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:22.176Z,1513232302.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:22.195Z,1513232302.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:22.265Z,1513232302.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:22.595Z,1513232302.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:22.678Z,1513232302.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:22.974Z,1513232302.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:23.007Z,1513232303.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:23.061Z,1513232303.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:23.394Z,1513232303.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:23.423Z,1513232303.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:23.465Z,1513232303.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:23.794Z,1513232303.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:23.823Z,1513232303.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:24.181Z,1513232304.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:24.199Z,1513232304.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:24.261Z,1513232304.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:24.591Z,1513232304.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:24.703Z,1513232304.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:24.992Z,1513232304.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:25.057Z,1513232305.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:25.070Z,1513232305.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:25.367Z,1513232305.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:25.419Z,1513232305.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:25.461Z,1513232305.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:25.772Z,1513232305.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:25.807Z,1513232305.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:26.172Z,1513232306.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:26.199Z,1513232306.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:26.257Z,1513232306.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:26.587Z,1513232306.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:26.602Z,1513232306.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:27.019Z,1513232307.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:27.054Z,1513232307.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:27.092Z,1513232307.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:27.386Z,1513232307.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:27.400Z,1513232307.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:27.457Z,1513232307.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:27.767Z,1513232307.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:27.823Z,1513232307.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:28.168Z,1513232308.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:28.196Z,1513232308.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:28.254Z,1513232308.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:28.568Z,1513232308.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:28.606Z,1513232308.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:29.015Z,1513232309.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:29.036Z,1513232309.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:29.080Z,1513232309.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:29.385Z,1513232309.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:29.416Z,1513232309.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:29.485Z,1513232309.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:29.785Z,1513232309.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:29.800Z,1513232309.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:30.177Z,1513232310.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:30.199Z,1513232310.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:30.281Z,1513232310.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:30.591Z,1513232310.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:30.676Z,1513232310.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:30.972Z,1513232310.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:30.988Z,1513232310.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:31.078Z,1513232311.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:31.418Z,1513232311.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:31.449Z,1513232311.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:31.482Z,1513232311.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:31.776Z,1513232311.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:31.791Z,1513232311.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:32.177Z,1513232312.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:32.202Z,1513232312.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:32.277Z,1513232312.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:32.623Z,1513232312.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:32.677Z,1513232312.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:32.982Z,1513232312.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:32.999Z,1513232312.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:33.073Z,1513232313.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:33.379Z,1513232313.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:33.406Z,1513232313.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:33.477Z,1513232313.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:33.777Z,1513232313.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:33.793Z,1513232313.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:34.179Z,1513232314.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:34.194Z,1513232314.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:34.273Z,1513232314.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:34.612Z,1513232314.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:34.702Z,1513232314.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:34.977Z,1513232314.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:34.991Z,1513232314.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:35.069Z,1513232315.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:35.402Z,1513232315.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:35.417Z,1513232315.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:35.473Z,1513232315.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:35.801Z,1513232315.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:35.861Z,1513232315.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:36.190Z,1513232316.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:36.219Z,1513232316.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:36.269Z,1513232316.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:36.602Z,1513232316.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:36.664Z,1513232316.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:36.978Z,1513232316.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:36.993Z,1513232316.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:37.065Z,1513232317.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:37.370Z,1513232317.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:37.393Z,1513232317.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:37.469Z,1513232317.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:37.783Z,1513232317.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:37.799Z,1513232317.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:38.176Z,1513232318.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:38.192Z,1513232318.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:38.265Z,1513232318.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:39.064Z,1513232319.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:39.469Z,1513232319.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:40.265Z,1513232320.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:41.063Z,1513232321.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:41.465Z,1513232321.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:41.709Z,1513232321.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:41.734Z,1513232321.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:41.842Z,1513232321.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:41.882Z,1513232321.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:42.207Z,1513232322.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:42.235Z,1513232322.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:42.293Z,1513232322.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:42.587Z,1513232322.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:42.603Z,1513232322.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:43.031Z,1513232323.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:43.051Z,1513232323.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:43.090Z,1513232323.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:43.391Z,1513232323.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:43.419Z,1513232323.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:43.494Z,1513232323.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:43.790Z,1513232323.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:43.818Z,1513232323.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:44.206Z,1513232324.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:44.258Z,1513232324.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:44.290Z,1513232324.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:44.613Z,1513232324.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:44.673Z,1513232324.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:45.002Z,1513232325.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:45.038Z,1513232325.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:45.086Z,1513232325.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:45.406Z,1513232325.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:45.440Z,1513232325.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:45.489Z,1513232325.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:45.788Z,1513232325.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:45.815Z,1513232325.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:46.195Z,1513232326.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:46.211Z,1513232326.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:46.285Z,1513232326.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:46.607Z,1513232326.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:46.668Z,1513232326.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:46.983Z,1513232326.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:47.010Z,1513232327.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:47.081Z,1513232327.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:47.409Z,1513232327.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:47.436Z,1513232327.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:47.486Z,1513232327.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:47.821Z,1513232327.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:47.890Z,1513232327.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:48.202Z,1513232328.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:48.251Z,1513232328.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:48.281Z,1513232328.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:48.636Z,1513232328.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:48.736Z,1513232328.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:48.987Z,1513232328.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:49.039Z,1513232329.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:49.077Z,1513232329.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:49.387Z,1513232329.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:49.418Z,1513232329.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:49.481Z,1513232329.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:49.783Z,1513232329.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:49.827Z,1513232329.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:50.188Z,1513232330.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:50.219Z,1513232330.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:50.277Z,1513232330.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:50.643Z,1513232330.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:50.736Z,1513232330.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:50.997Z,1513232330.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:51.012Z,1513232331.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:51.073Z,1513232331.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:51.394Z,1513232331.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:51.408Z,1513232331.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:51.477Z,1513232331.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:51.793Z,1513232331.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:51.808Z,1513232331.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:52.193Z,1513232332.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:52.208Z,1513232332.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:52.273Z,1513232332.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:52.593Z,1513232332.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:52.608Z,1513232332.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:52.996Z,1513232332.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:53.015Z,1513232333.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:53.069Z,1513232333.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:53.407Z,1513232333.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:53.422Z,1513232333.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:53.473Z,1513232333.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:53.810Z,1513232333.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:53.828Z,1513232333.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:54.193Z,1513232334.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:54.219Z,1513232334.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:54.269Z,1513232334.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:54.580Z,1513232334.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:54.595Z,1513232334.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:55.018Z,1513232335.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:55.044Z,1513232335.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:55.065Z,1513232335.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:55.388Z,1513232335.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:55.427Z,1513232335.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:55.469Z,1513232335.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:55.784Z,1513232335.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:55.798Z,1513232335.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:56.187Z,1513232336.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:56.203Z,1513232336.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:56.265Z,1513232336.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:56.602Z,1513232336.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:56.629Z,1513232336.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:57.063Z,1513232337.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:57.080Z,1513232337.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:57.108Z,1513232337.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:57.406Z,1513232337.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:57.436Z,1513232337.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:57.465Z,1513232337.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:57.788Z,1513232337.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:57.807Z,1513232337.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:58.191Z,1513232338.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:58.238Z,1513232338.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:58.261Z,1513232338.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:58.623Z,1513232338.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:58.680Z,1513232338.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:58.990Z,1513232338.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:59.016Z,1513232339.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:59.058Z,1513232339.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:59.398Z,1513232339.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:59.429Z,1513232339.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:18:59.461Z,1513232339.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:59.807Z,1513232339.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:18:59.839Z,1513232339.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:00.201Z,1513232340.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:00.252Z,1513232340.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:00.265Z,1513232340.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:00.666Z,1513232340.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:00.689Z,1513232340.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:00.991Z,1513232340.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:01.027Z,1513232341.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:01.061Z,1513232341.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:01.388Z,1513232341.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:01.403Z,1513232341.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:01.403Z,1513232341.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2017-12-14T06:19:01.403Z,1513232341.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:19:01.405Z,1513232341.405 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:01.405Z,1513232341.405 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116
2017-12-14T06:19:01.405Z,1513232341.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:19:01.407Z,1513232341.407 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:01.407Z,1513232341.407 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2017-12-14T06:19:01.407Z,1513232341.407 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:19:01.436Z,1513232341.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:19:01.436Z,1513232341.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:19:01.436Z,1513232341.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:19:01.466Z,1513232341.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:01.792Z,1513232341.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:01.816Z,1513232341.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:19:01.816Z,1513232341.816 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2017-12-14T06:19:01.817Z,1513232341.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:19:01.817Z,1513232341.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116
2017-12-14T06:19:01.817Z,1513232341.817 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:19:01.817Z,1513232341.817 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2017-12-14T06:19:02.191Z,1513232342.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:02.205Z,1513232342.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:19:02.206Z,1513232342.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:19:02.206Z,1513232342.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:19:02.206Z,1513232342.206 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:19:02.207Z,1513232342.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:19:02.207Z,1513232342.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:19:02.207Z,1513232342.207 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:19:02.208Z,1513232342.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:19:02.208Z,1513232342.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:19:02.262Z,1513232342.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:02.622Z,1513232342.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:02.670Z,1513232342.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:03.006Z,1513232343.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:03.020Z,1513232343.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:03.057Z,1513232343.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:03.409Z,1513232343.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:03.435Z,1513232343.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:03.462Z,1513232343.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:03.789Z,1513232343.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:03.818Z,1513232343.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:04.180Z,1513232344.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:04.196Z,1513232344.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:04.257Z,1513232344.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:04.640Z,1513232344.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:04.679Z,1513232344.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:04.987Z,1513232344.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:05.019Z,1513232345.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:05.065Z,1513232345.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:05.411Z,1513232345.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:05.469Z,1513232345.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:05.476Z,1513232345.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:05.797Z,1513232345.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:05.812Z,1513232345.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:06.197Z,1513232346.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:06.219Z,1513232346.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:06.265Z,1513232346.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:06.603Z,1513232346.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:06.696Z,1513232346.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:06.992Z,1513232346.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:07.033Z,1513232347.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:07.069Z,1513232347.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:07.394Z,1513232347.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:07.421Z,1513232347.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:07.473Z,1513232347.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:07.788Z,1513232347.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:07.807Z,1513232347.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:08.193Z,1513232348.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:08.208Z,1513232348.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:08.242Z,1513232348.242 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:19:08.269Z,1513232348.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:08.603Z,1513232348.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:08.636Z,1513232348.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:09.040Z,1513232349.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:09.054Z,1513232349.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:09.073Z,1513232349.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:09.398Z,1513232349.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:09.412Z,1513232349.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:09.477Z,1513232349.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:09.790Z,1513232349.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:09.815Z,1513232349.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:10.193Z,1513232350.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:10.273Z,1513232350.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:10.287Z,1513232350.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:10.598Z,1513232350.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:10.613Z,1513232350.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:11.009Z,1513232351.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:11.053Z,1513232351.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:11.069Z,1513232351.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:11.402Z,1513232351.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:11.447Z,1513232351.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:11.473Z,1513232351.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:11.801Z,1513232351.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:11.816Z,1513232351.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:12.202Z,1513232352.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:12.250Z,1513232352.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:12.269Z,1513232352.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:12.617Z,1513232352.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:12.664Z,1513232352.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:13.016Z,1513232353.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:13.044Z,1513232353.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:13.065Z,1513232353.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:13.393Z,1513232353.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:13.408Z,1513232353.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:13.469Z,1513232353.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:13.795Z,1513232353.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:13.811Z,1513232353.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:14.191Z,1513232354.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:14.211Z,1513232354.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:14.265Z,1513232354.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:14.644Z,1513232354.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:14.693Z,1513232354.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:15.005Z,1513232355.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:15.019Z,1513232355.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:15.061Z,1513232355.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:15.408Z,1513232355.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:15.423Z,1513232355.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:15.465Z,1513232355.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:15.784Z,1513232355.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:15.819Z,1513232355.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:16.234Z,1513232356.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:16.261Z,1513232356.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:16.265Z,1513232356.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:16.648Z,1513232356.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:16.683Z,1513232356.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:16.990Z,1513232356.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:17.005Z,1513232357.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:17.057Z,1513232357.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:17.405Z,1513232357.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:17.433Z,1513232357.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:17.461Z,1513232357.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:17.794Z,1513232357.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:17.808Z,1513232357.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:18.194Z,1513232358.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:18.210Z,1513232358.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:18.257Z,1513232358.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:18.634Z,1513232358.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:18.671Z,1513232358.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:18.988Z,1513232358.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:19.003Z,1513232359.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:19.053Z,1513232359.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:19.430Z,1513232359.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:19.454Z,1513232359.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:19.457Z,1513232359.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:19.792Z,1513232359.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:19.808Z,1513232359.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:20.188Z,1513232360.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:20.211Z,1513232360.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:20.253Z,1513232360.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:20.598Z,1513232360.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:20.703Z,1513232360.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:21.002Z,1513232361.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:21.017Z,1513232361.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:21.049Z,1513232361.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:21.401Z,1513232361.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:21.417Z,1513232361.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:21.453Z,1513232361.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:21.797Z,1513232361.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:21.828Z,1513232361.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:22.191Z,1513232362.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:22.211Z,1513232362.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:22.249Z,1513232362.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:22.599Z,1513232362.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:22.627Z,1513232362.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:23.020Z,1513232363.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:23.045Z,1513232363.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:23.059Z,1513232363.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:23.404Z,1513232363.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:23.424Z,1513232363.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:23.449Z,1513232363.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:23.800Z,1513232363.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:23.816Z,1513232363.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:24.202Z,1513232364.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:24.216Z,1513232364.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:24.246Z,1513232364.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:24.583Z,1513232364.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:24.609Z,1513232364.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:25.009Z,1513232365.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:25.032Z,1513232365.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:25.049Z,1513232365.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:25.384Z,1513232365.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:25.415Z,1513232365.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:25.453Z,1513232365.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:25.841Z,1513232365.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:25.883Z,1513232365.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:26.187Z,1513232366.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:26.222Z,1513232366.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:26.249Z,1513232366.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:26.619Z,1513232366.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:26.675Z,1513232366.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:26.997Z,1513232366.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:27.031Z,1513232367.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:27.045Z,1513232367.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:27.394Z,1513232367.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:27.424Z,1513232367.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:27.449Z,1513232367.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:27.792Z,1513232367.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:27.831Z,1513232367.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:28.188Z,1513232368.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:28.203Z,1513232368.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:28.245Z,1513232368.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:28.638Z,1513232368.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:28.677Z,1513232368.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:29.020Z,1513232369.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:29.039Z,1513232369.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:29.042Z,1513232369.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:29.397Z,1513232369.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:29.419Z,1513232369.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:29.445Z,1513232369.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:29.798Z,1513232369.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:29.825Z,1513232369.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:30.202Z,1513232370.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:30.235Z,1513232370.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:30.241Z,1513232370.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:30.660Z,1513232370.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:30.696Z,1513232370.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:30.987Z,1513232370.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:31.023Z,1513232371.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:31.038Z,1513232371.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:31.391Z,1513232371.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:31.427Z,1513232371.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:31.441Z,1513232371.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:31.790Z,1513232371.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:31.805Z,1513232371.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:32.203Z,1513232372.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:32.237Z,1513232372.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:32.243Z,1513232372.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:32.652Z,1513232372.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:32.688Z,1513232372.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:32.997Z,1513232372.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:33.033Z,1513232373.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:33.075Z,1513232373.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:33.398Z,1513232373.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:33.413Z,1513232373.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:33.437Z,1513232373.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:33.793Z,1513232373.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:33.839Z,1513232373.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:34.197Z,1513232374.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:34.212Z,1513232374.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:34.233Z,1513232374.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:34.596Z,1513232374.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:34.696Z,1513232374.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:34.983Z,1513232374.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:35.023Z,1513232375.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:35.029Z,1513232375.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:35.428Z,1513232375.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:35.433Z,1513232375.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:35.456Z,1513232375.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:35.798Z,1513232375.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:35.813Z,1513232375.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:36.194Z,1513232376.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:36.208Z,1513232376.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:36.229Z,1513232376.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:36.593Z,1513232376.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:36.607Z,1513232376.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:37.026Z,1513232377.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:37.030Z,1513232377.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:37.061Z,1513232377.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:37.390Z,1513232377.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:37.411Z,1513232377.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:37.429Z,1513232377.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:37.796Z,1513232377.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:37.810Z,1513232377.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:38.196Z,1513232378.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:38.211Z,1513232378.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:38.225Z,1513232378.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:39.021Z,1513232379.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:39.425Z,1513232379.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:40.221Z,1513232380.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:41.017Z,1513232381.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:41.421Z,1513232381.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:41.849Z,1513232381.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:41.864Z,1513232381.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:42.046Z,1513232382.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:42.069Z,1513232382.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:42.217Z,1513232382.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:42.407Z,1513232382.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:42.422Z,1513232382.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:42.775Z,1513232382.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:42.829Z,1513232382.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:43.013Z,1513232383.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:43.179Z,1513232383.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:43.212Z,1513232383.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:43.417Z,1513232383.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:43.584Z,1513232383.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:43.620Z,1513232383.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:43.980Z,1513232383.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:44.008Z,1513232384.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:44.216Z,1513232384.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:44.390Z,1513232384.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:44.437Z,1513232384.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:44.812Z,1513232384.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:44.838Z,1513232384.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:45.009Z,1513232385.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:45.226Z,1513232385.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:45.279Z,1513232385.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:45.413Z,1513232385.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:45.588Z,1513232385.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:45.606Z,1513232385.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:45.986Z,1513232385.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:46.030Z,1513232386.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:46.209Z,1513232386.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:46.386Z,1513232386.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:46.400Z,1513232386.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:46.783Z,1513232386.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:46.813Z,1513232386.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:47.005Z,1513232387.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:47.201Z,1513232387.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:47.232Z,1513232387.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:47.409Z,1513232387.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:47.590Z,1513232387.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:47.633Z,1513232387.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:47.990Z,1513232387.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:48.012Z,1513232388.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:48.205Z,1513232388.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:48.412Z,1513232388.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:48.452Z,1513232388.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:48.788Z,1513232388.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:48.805Z,1513232388.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:49.001Z,1513232389.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:49.192Z,1513232389.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:49.235Z,1513232389.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:49.405Z,1513232389.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:49.589Z,1513232389.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:49.613Z,1513232389.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:49.988Z,1513232389.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:50.012Z,1513232390.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:50.201Z,1513232390.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:50.397Z,1513232390.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:50.411Z,1513232390.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:50.838Z,1513232390.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:50.855Z,1513232390.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:50.999Z,1513232390.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:51.216Z,1513232391.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:51.235Z,1513232391.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:51.401Z,1513232391.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:51.612Z,1513232391.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:51.640Z,1513232391.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:51.998Z,1513232391.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:52.031Z,1513232392.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:52.198Z,1513232392.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:52.379Z,1513232392.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:52.426Z,1513232392.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:52.784Z,1513232392.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:52.827Z,1513232392.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:52.994Z,1513232392.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:53.198Z,1513232393.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:53.225Z,1513232393.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:53.397Z,1513232393.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:53.596Z,1513232393.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:53.631Z,1513232393.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:53.994Z,1513232393.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:54.031Z,1513232394.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:54.193Z,1513232394.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:54.399Z,1513232394.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:54.432Z,1513232394.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:54.830Z,1513232394.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:54.971Z,1513232394.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:54.989Z,1513232394.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:55.194Z,1513232395.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:55.208Z,1513232395.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:55.393Z,1513232395.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:55.589Z,1513232395.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:55.633Z,1513232395.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:55.989Z,1513232395.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:56.046Z,1513232396.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:56.189Z,1513232396.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:56.397Z,1513232396.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:56.415Z,1513232396.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:56.808Z,1513232396.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:56.859Z,1513232396.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:56.985Z,1513232396.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:57.217Z,1513232397.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:57.234Z,1513232397.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:57.389Z,1513232397.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:57.577Z,1513232397.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:57.616Z,1513232397.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:57.982Z,1513232397.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:58.010Z,1513232398.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:58.185Z,1513232398.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:58.385Z,1513232398.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:58.416Z,1513232398.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:58.780Z,1513232398.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:58.825Z,1513232398.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:58.981Z,1513232398.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:59.187Z,1513232399.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:59.234Z,1513232399.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:59.385Z,1513232399.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:59.602Z,1513232399.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:19:59.624Z,1513232399.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:19:59.999Z,1513232399.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:00.070Z,1513232400.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:00.181Z,1513232400.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:00.393Z,1513232400.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:00.435Z,1513232400.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:00.780Z,1513232400.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:00.809Z,1513232400.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:00.977Z,1513232400.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:01.229Z,1513232401.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:01.253Z,1513232401.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:01.381Z,1513232401.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:01.601Z,1513232401.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:01.616Z,1513232401.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:01.989Z,1513232401.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:02.060Z,1513232402.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:02.177Z,1513232402.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:02.391Z,1513232402.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:02.413Z,1513232402.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:02.805Z,1513232402.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:02.820Z,1513232402.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:02.976Z,1513232402.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:03.201Z,1513232403.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:03.215Z,1513232403.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:03.381Z,1513232403.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:03.570Z,1513232403.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:03.614Z,1513232403.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:03.985Z,1513232403.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:04.014Z,1513232404.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:04.177Z,1513232404.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:04.410Z,1513232404.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:04.447Z,1513232404.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:04.792Z,1513232404.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:04.811Z,1513232404.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:04.982Z,1513232404.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:05.199Z,1513232405.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:05.259Z,1513232405.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:05.393Z,1513232405.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:05.598Z,1513232405.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:05.620Z,1513232405.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:05.997Z,1513232405.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:06.016Z,1513232406.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:06.189Z,1513232406.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:06.403Z,1513232406.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:06.418Z,1513232406.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:06.789Z,1513232406.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:06.822Z,1513232406.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:06.986Z,1513232406.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:07.192Z,1513232407.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:07.215Z,1513232407.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:07.393Z,1513232407.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:07.614Z,1513232407.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:07.650Z,1513232407.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:08.002Z,1513232408.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:08.023Z,1513232408.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:08.189Z,1513232408.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:08.402Z,1513232408.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:08.448Z,1513232408.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:08.810Z,1513232408.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:08.826Z,1513232408.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:08.985Z,1513232408.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:09.212Z,1513232409.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:09.250Z,1513232409.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:09.389Z,1513232409.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:09.569Z,1513232409.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:09.611Z,1513232409.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:09.984Z,1513232409.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:10.017Z,1513232410.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:10.185Z,1513232410.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:10.375Z,1513232410.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:10.414Z,1513232410.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:10.802Z,1513232410.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:10.849Z,1513232410.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:10.982Z,1513232410.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:11.203Z,1513232411.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:11.223Z,1513232411.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:11.385Z,1513232411.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:11.610Z,1513232411.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:11.632Z,1513232411.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:12.011Z,1513232412.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:12.031Z,1513232412.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:12.181Z,1513232412.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:12.403Z,1513232412.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:12.438Z,1513232412.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:12.806Z,1513232412.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:12.876Z,1513232412.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:12.977Z,1513232412.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:13.181Z,1513232413.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:13.226Z,1513232413.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:13.381Z,1513232413.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:13.585Z,1513232413.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:13.617Z,1513232413.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:14.038Z,1513232414.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:14.077Z,1513232414.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:14.177Z,1513232414.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:14.412Z,1513232414.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:14.428Z,1513232414.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:14.826Z,1513232414.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:14.840Z,1513232414.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:14.973Z,1513232414.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:15.204Z,1513232415.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:15.244Z,1513232415.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:15.377Z,1513232415.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:15.582Z,1513232415.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:15.626Z,1513232415.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:15.989Z,1513232415.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:16.022Z,1513232416.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:16.173Z,1513232416.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:16.381Z,1513232416.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:16.431Z,1513232416.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:16.781Z,1513232416.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:16.800Z,1513232416.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:16.969Z,1513232416.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:17.233Z,1513232417.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:17.257Z,1513232417.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:17.374Z,1513232417.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:17.606Z,1513232417.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:17.643Z,1513232417.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:17.990Z,1513232417.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:18.033Z,1513232418.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:18.172Z,1513232418.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:18.394Z,1513232418.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:18.438Z,1513232418.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:18.787Z,1513232418.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:18.808Z,1513232418.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:18.967Z,1513232418.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:19.178Z,1513232419.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:19.208Z,1513232419.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:19.393Z,1513232419.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:19.591Z,1513232419.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:19.637Z,1513232419.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:19.988Z,1513232419.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:20.006Z,1513232420.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:20.189Z,1513232420.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:20.423Z,1513232420.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:20.431Z,1513232420.431 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:20:20.431Z,1513232420.431 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:20:20.431Z,1513232420.431 [BPC1](ERROR): Communications Fault
2017-12-14T06:20:20.465Z,1513232420.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:20.499Z,1513232420.499 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:20:20.792Z,1513232420.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:20.820Z,1513232420.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:20.986Z,1513232420.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:21.221Z,1513232421.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:21.236Z,1513232421.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:21.396Z,1513232421.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:21.587Z,1513232421.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:21.639Z,1513232421.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:21.677Z,1513232421.677 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:20:21.678Z,1513232421.678 [BPC1] No Fault, FailCount= 1
2017-12-14T06:20:21.980Z,1513232421.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:22.067Z,1513232422.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:22.189Z,1513232422.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:22.383Z,1513232422.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:22.410Z,1513232422.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:22.780Z,1513232422.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:22.804Z,1513232422.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:22.985Z,1513232422.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:23.191Z,1513232423.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:23.230Z,1513232423.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:23.389Z,1513232423.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:23.648Z,1513232423.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:23.683Z,1513232423.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:24.013Z,1513232424.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:24.035Z,1513232424.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:24.185Z,1513232424.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:24.390Z,1513232424.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:24.425Z,1513232424.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:24.784Z,1513232424.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:24.818Z,1513232424.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:24.981Z,1513232424.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:25.182Z,1513232425.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:25.213Z,1513232425.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:25.385Z,1513232425.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:25.580Z,1513232425.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:25.624Z,1513232425.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:25.980Z,1513232425.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:26.024Z,1513232426.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:26.181Z,1513232426.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:26.389Z,1513232426.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:26.427Z,1513232426.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:26.839Z,1513232426.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:26.898Z,1513232426.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:27.006Z,1513232427.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:27.203Z,1513232427.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:27.237Z,1513232427.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:27.409Z,1513232427.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:27.582Z,1513232427.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:27.627Z,1513232427.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:27.987Z,1513232427.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:28.001Z,1513232428.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:28.208Z,1513232428.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:28.385Z,1513232428.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:28.427Z,1513232428.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:28.792Z,1513232428.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:28.823Z,1513232428.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:29.005Z,1513232429.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:29.184Z,1513232429.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:29.238Z,1513232429.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:29.409Z,1513232429.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:29.597Z,1513232429.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:29.632Z,1513232429.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:29.986Z,1513232429.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:30.039Z,1513232430.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:30.205Z,1513232430.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:30.407Z,1513232430.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:30.456Z,1513232430.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:30.784Z,1513232430.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:30.830Z,1513232430.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:31.001Z,1513232431.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:31.187Z,1513232431.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:31.208Z,1513232431.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:31.405Z,1513232431.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:31.589Z,1513232431.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:31.610Z,1513232431.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:31.992Z,1513232431.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:32.011Z,1513232432.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:32.201Z,1513232432.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:32.390Z,1513232432.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:32.433Z,1513232432.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:32.801Z,1513232432.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:32.831Z,1513232432.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:32.998Z,1513232432.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:33.208Z,1513232433.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:33.244Z,1513232433.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:33.401Z,1513232433.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:33.586Z,1513232433.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:33.606Z,1513232433.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:33.987Z,1513232433.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:34.013Z,1513232434.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:34.197Z,1513232434.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:34.396Z,1513232434.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:34.446Z,1513232434.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:34.783Z,1513232434.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:34.809Z,1513232434.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:34.994Z,1513232434.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:35.201Z,1513232435.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:35.239Z,1513232435.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:35.397Z,1513232435.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:35.599Z,1513232435.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:35.640Z,1513232435.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:35.990Z,1513232435.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:36.013Z,1513232436.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:36.193Z,1513232436.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:36.432Z,1513232436.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:36.482Z,1513232436.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:36.800Z,1513232436.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:36.826Z,1513232436.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:36.989Z,1513232436.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:37.187Z,1513232437.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:37.226Z,1513232437.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:37.393Z,1513232437.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:37.582Z,1513232437.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:37.630Z,1513232437.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:37.982Z,1513232437.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:38.020Z,1513232438.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:38.189Z,1513232438.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:38.404Z,1513232438.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:38.430Z,1513232438.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:38.985Z,1513232438.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:39.389Z,1513232439.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:40.185Z,1513232440.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:40.981Z,1513232440.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:41.385Z,1513232441.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:41.938Z,1513232441.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:42.031Z,1513232442.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:42.132Z,1513232442.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:42.147Z,1513232442.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:42.181Z,1513232442.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:42.503Z,1513232442.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:42.518Z,1513232442.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:42.907Z,1513232442.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:42.971Z,1513232442.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:42.977Z,1513232442.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:43.314Z,1513232443.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:43.328Z,1513232443.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:43.381Z,1513232443.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:43.712Z,1513232443.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:43.754Z,1513232443.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:44.113Z,1513232444.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:44.135Z,1513232444.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:44.177Z,1513232444.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:44.488Z,1513232444.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:44.526Z,1513232444.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:44.912Z,1513232444.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:44.926Z,1513232444.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:44.974Z,1513232444.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:45.296Z,1513232445.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:45.319Z,1513232445.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:45.377Z,1513232445.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:45.710Z,1513232445.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:45.732Z,1513232445.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:46.114Z,1513232446.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:46.132Z,1513232446.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:46.173Z,1513232446.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:46.514Z,1513232446.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:46.535Z,1513232446.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:46.885Z,1513232446.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:46.966Z,1513232446.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:46.971Z,1513232446.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:47.305Z,1513232447.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:47.320Z,1513232447.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:47.429Z,1513232447.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:47.706Z,1513232447.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:47.721Z,1513232447.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:48.094Z,1513232448.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:48.110Z,1513232448.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:48.225Z,1513232448.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:48.504Z,1513232448.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:48.519Z,1513232448.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:48.910Z,1513232448.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:49.010Z,1513232449.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:49.022Z,1513232449.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:49.313Z,1513232449.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:49.328Z,1513232449.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:49.426Z,1513232449.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:49.691Z,1513232449.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:49.727Z,1513232449.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:50.096Z,1513232450.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:50.124Z,1513232450.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:50.221Z,1513232450.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:50.491Z,1513232450.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:50.527Z,1513232450.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:50.891Z,1513232450.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:50.927Z,1513232450.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:51.017Z,1513232451.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:51.326Z,1513232451.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:51.359Z,1513232451.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:51.709Z,1513232451.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:51.713Z,1513232451.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:51.743Z,1513232451.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:52.125Z,1513232452.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:52.164Z,1513232452.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:52.512Z,1513232452.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:52.513Z,1513232452.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:52.547Z,1513232452.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:52.891Z,1513232452.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:52.918Z,1513232452.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:53.077Z,1513232453.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:53.291Z,1513232453.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:53.315Z,1513232453.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:53.692Z,1513232453.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:53.723Z,1513232453.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:53.873Z,1513232453.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:54.091Z,1513232454.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:54.123Z,1513232454.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:54.514Z,1513232454.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:54.528Z,1513232454.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:54.669Z,1513232454.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:54.930Z,1513232454.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:54.945Z,1513232454.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:55.073Z,1513232455.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:55.310Z,1513232455.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:55.339Z,1513232455.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:55.697Z,1513232455.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:55.731Z,1513232455.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:55.870Z,1513232455.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:56.107Z,1513232456.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:56.132Z,1513232456.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:56.500Z,1513232456.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:56.532Z,1513232456.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:56.666Z,1513232456.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:56.902Z,1513232456.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:56.921Z,1513232456.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:57.069Z,1513232457.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:57.310Z,1513232457.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:57.346Z,1513232457.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:57.714Z,1513232457.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:57.745Z,1513232457.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:57.865Z,1513232457.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:58.109Z,1513232458.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:58.123Z,1513232458.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:58.500Z,1513232458.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:58.519Z,1513232458.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:58.663Z,1513232458.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:58.935Z,1513232458.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:58.958Z,1513232458.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:59.105Z,1513232459.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:59.306Z,1513232459.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:59.320Z,1513232459.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:59.710Z,1513232459.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:20:59.747Z,1513232459.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:20:59.902Z,1513232459.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:00.106Z,1513232460.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:00.127Z,1513232460.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:00.506Z,1513232460.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:00.520Z,1513232460.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:00.697Z,1513232460.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:00.907Z,1513232460.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:00.992Z,1513232460.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:01.301Z,1513232461.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:01.323Z,1513232461.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:01.441Z,1513232461.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:01.702Z,1513232461.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:01.717Z,1513232461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:02.143Z,1513232462.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:02.167Z,1513232462.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:02.238Z,1513232462.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:02.518Z,1513232462.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:02.534Z,1513232462.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:02.929Z,1513232462.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:03.033Z,1513232463.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:03.064Z,1513232463.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:03.316Z,1513232463.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:03.332Z,1513232463.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:03.437Z,1513232463.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:03.702Z,1513232463.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:03.762Z,1513232463.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:04.105Z,1513232464.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:04.119Z,1513232464.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:04.233Z,1513232464.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:04.488Z,1513232464.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:04.559Z,1513232464.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:04.892Z,1513232464.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:04.924Z,1513232464.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:05.029Z,1513232465.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:05.309Z,1513232465.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:05.332Z,1513232465.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:05.434Z,1513232465.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:05.705Z,1513232465.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:05.731Z,1513232465.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:06.101Z,1513232466.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:06.131Z,1513232466.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:06.229Z,1513232466.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:06.502Z,1513232466.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:06.536Z,1513232466.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:06.891Z,1513232466.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:06.906Z,1513232466.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:07.025Z,1513232467.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:07.297Z,1513232467.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:07.311Z,1513232467.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:07.429Z,1513232467.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:07.698Z,1513232467.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:07.712Z,1513232467.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:08.095Z,1513232468.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:08.109Z,1513232468.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:08.225Z,1513232468.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:08.586Z,1513232468.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:08.664Z,1513232468.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:08.913Z,1513232468.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:08.935Z,1513232468.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:09.022Z,1513232469.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:09.313Z,1513232469.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:09.328Z,1513232469.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:09.425Z,1513232469.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:09.703Z,1513232469.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:09.718Z,1513232469.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:10.100Z,1513232470.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:10.119Z,1513232470.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:10.221Z,1513232470.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:10.500Z,1513232470.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:10.514Z,1513232470.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:10.891Z,1513232470.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:10.927Z,1513232470.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:11.017Z,1513232471.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:11.310Z,1513232471.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:11.329Z,1513232471.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:11.421Z,1513232471.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:11.714Z,1513232471.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:11.729Z,1513232471.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:12.102Z,1513232472.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:12.128Z,1513232472.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:12.217Z,1513232472.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:12.491Z,1513232472.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:12.532Z,1513232472.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:12.893Z,1513232472.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:12.944Z,1513232472.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:13.013Z,1513232473.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:13.334Z,1513232473.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:13.350Z,1513232473.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:13.701Z,1513232473.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:13.707Z,1513232473.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:13.737Z,1513232473.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:14.105Z,1513232474.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:14.136Z,1513232474.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:14.497Z,1513232474.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:14.507Z,1513232474.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:14.539Z,1513232474.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:14.892Z,1513232474.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:15.025Z,1513232475.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:15.293Z,1513232475.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:15.304Z,1513232475.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:15.330Z,1513232475.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:15.698Z,1513232475.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:15.708Z,1513232475.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:15.724Z,1513232475.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:16.100Z,1513232476.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:16.119Z,1513232476.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:16.493Z,1513232476.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:16.517Z,1513232476.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:16.532Z,1513232476.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:16.923Z,1513232476.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:16.995Z,1513232476.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:17.290Z,1513232477.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:17.314Z,1513232477.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:17.341Z,1513232477.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:17.693Z,1513232477.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:17.696Z,1513232477.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:17.746Z,1513232477.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:18.095Z,1513232478.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:18.131Z,1513232478.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:18.490Z,1513232478.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:18.501Z,1513232478.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:18.624Z,1513232478.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:18.905Z,1513232478.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:18.943Z,1513232478.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:19.078Z,1513232479.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:19.297Z,1513232479.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:19.312Z,1513232479.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:19.703Z,1513232479.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:19.723Z,1513232479.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:19.873Z,1513232479.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:20.150Z,1513232480.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:20.202Z,1513232480.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:20.535Z,1513232480.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:20.639Z,1513232480.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:20.670Z,1513232480.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:20.918Z,1513232480.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:20.943Z,1513232480.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:21.102Z,1513232481.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:21.295Z,1513232481.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:21.367Z,1513232481.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:21.696Z,1513232481.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:21.722Z,1513232481.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:21.898Z,1513232481.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:22.100Z,1513232482.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:22.123Z,1513232482.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:22.512Z,1513232482.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:22.551Z,1513232482.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:22.694Z,1513232482.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:22.932Z,1513232482.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:22.968Z,1513232482.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:23.097Z,1513232483.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:23.304Z,1513232483.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:23.391Z,1513232483.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:23.699Z,1513232483.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:23.802Z,1513232483.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:23.894Z,1513232483.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:24.121Z,1513232484.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:24.147Z,1513232484.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:24.520Z,1513232484.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:24.686Z,1513232484.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:24.690Z,1513232484.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:24.922Z,1513232484.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:24.937Z,1513232484.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:25.219Z,1513232485.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:25.308Z,1513232485.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:25.359Z,1513232485.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:25.712Z,1513232485.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:25.755Z,1513232485.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:26.014Z,1513232486.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:26.110Z,1513232486.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:26.162Z,1513232486.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:26.495Z,1513232486.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:26.523Z,1513232486.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:26.809Z,1513232486.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:26.918Z,1513232486.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:26.953Z,1513232486.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:27.213Z,1513232487.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:27.299Z,1513232487.299 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T06:21:27.299Z,1513232487.299 [NAL9602] Data Fault, FailCount= 2
2017-12-14T06:21:27.299Z,1513232487.299 [NAL9602](ERROR): Data Fault
2017-12-14T06:21:27.323Z,1513232487.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:27.337Z,1513232487.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:27.379Z,1513232487.379 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T06:21:27.674Z,1513232487.674 [NAL9602](INFO): Powering down
2017-12-14T06:21:27.707Z,1513232487.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:27.755Z,1513232487.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:28.009Z,1513232488.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:28.139Z,1513232488.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:28.223Z,1513232488.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:28.490Z,1513232488.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:28.504Z,1513232488.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:28.570Z,1513232488.570 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:21:28.570Z,1513232488.570 [NAL9602] No Fault, FailCount= 2
2017-12-14T06:21:28.807Z,1513232488.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:28.899Z,1513232488.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:28.992Z,1513232488.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:29.293Z,1513232489.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:29.327Z,1513232489.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:29.556Z,1513232489.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:29.718Z,1513232489.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:29.732Z,1513232489.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:30.093Z,1513232490.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:30.132Z,1513232490.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:30.350Z,1513232490.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:30.492Z,1513232490.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:30.543Z,1513232490.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:30.892Z,1513232490.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:30.972Z,1513232490.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:31.146Z,1513232491.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:31.302Z,1513232491.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:31.323Z,1513232491.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:31.550Z,1513232491.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:31.702Z,1513232491.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:31.750Z,1513232491.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:32.102Z,1513232492.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:32.176Z,1513232492.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:32.346Z,1513232492.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:32.512Z,1513232492.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:32.556Z,1513232492.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:32.893Z,1513232492.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:32.964Z,1513232492.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:33.110Z,1513232493.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:33.292Z,1513232493.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:33.336Z,1513232493.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:33.713Z,1513232493.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:33.811Z,1513232493.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:33.906Z,1513232493.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:34.115Z,1513232494.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:34.161Z,1513232494.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:34.497Z,1513232494.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:34.512Z,1513232494.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:34.702Z,1513232494.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:34.892Z,1513232494.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:34.932Z,1513232494.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:35.114Z,1513232495.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:35.292Z,1513232495.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:35.335Z,1513232495.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:35.692Z,1513232495.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:35.733Z,1513232495.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:35.911Z,1513232495.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:36.093Z,1513232496.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:36.136Z,1513232496.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:36.492Z,1513232496.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:36.546Z,1513232496.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:36.706Z,1513232496.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:36.902Z,1513232496.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:36.943Z,1513232496.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:37.109Z,1513232497.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:37.302Z,1513232497.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:37.330Z,1513232497.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:37.688Z,1513232497.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:37.739Z,1513232497.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:37.905Z,1513232497.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:38.100Z,1513232498.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:38.131Z,1513232498.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:38.503Z,1513232498.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:38.527Z,1513232498.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:38.755Z,1513232498.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:39.157Z,1513232499.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:39.953Z,1513232499.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:40.751Z,1513232500.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:41.154Z,1513232501.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:41.949Z,1513232501.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:42.746Z,1513232502.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:43.397Z,1513232503.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:43.578Z,1513232503.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:43.597Z,1513232503.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:43.691Z,1513232503.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:43.706Z,1513232503.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:44.051Z,1513232504.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:44.066Z,1513232504.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:44.193Z,1513232504.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:44.455Z,1513232504.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:44.497Z,1513232504.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:44.853Z,1513232504.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:44.958Z,1513232504.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:44.989Z,1513232504.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:45.286Z,1513232505.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:45.330Z,1513232505.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:45.426Z,1513232505.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:45.647Z,1513232505.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:45.684Z,1513232505.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:46.051Z,1513232506.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:46.103Z,1513232506.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:46.221Z,1513232506.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:46.451Z,1513232506.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:46.483Z,1513232506.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:46.847Z,1513232506.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:46.895Z,1513232506.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:47.017Z,1513232507.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:47.248Z,1513232507.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:47.292Z,1513232507.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:47.421Z,1513232507.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:47.647Z,1513232507.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:47.682Z,1513232507.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:48.044Z,1513232508.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:48.058Z,1513232508.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:48.217Z,1513232508.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:48.491Z,1513232508.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:48.511Z,1513232508.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:48.846Z,1513232508.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:48.880Z,1513232508.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:49.013Z,1513232509.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:49.246Z,1513232509.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:49.284Z,1513232509.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:49.417Z,1513232509.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:49.647Z,1513232509.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:49.679Z,1513232509.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:50.047Z,1513232510.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:50.086Z,1513232510.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:50.213Z,1513232510.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:50.444Z,1513232510.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:50.458Z,1513232510.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:50.852Z,1513232510.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:50.880Z,1513232510.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:51.009Z,1513232511.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:51.262Z,1513232511.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:51.285Z,1513232511.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:51.413Z,1513232511.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:51.647Z,1513232511.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:51.662Z,1513232511.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:52.048Z,1513232512.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:52.079Z,1513232512.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:52.209Z,1513232512.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:52.455Z,1513232512.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:52.470Z,1513232512.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:52.852Z,1513232512.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:52.866Z,1513232512.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:53.005Z,1513232513.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:53.257Z,1513232513.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:53.272Z,1513232513.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:53.655Z,1513232513.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:53.669Z,1513232513.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:53.801Z,1513232513.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:54.054Z,1513232514.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:54.068Z,1513232514.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:54.456Z,1513232514.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:54.471Z,1513232514.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:54.597Z,1513232514.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:54.895Z,1513232514.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:54.963Z,1513232514.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:55.256Z,1513232515.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:55.270Z,1513232515.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:55.393Z,1513232515.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:55.657Z,1513232515.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:55.672Z,1513232515.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:56.055Z,1513232516.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:56.070Z,1513232516.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:56.189Z,1513232516.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:56.510Z,1513232516.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:56.525Z,1513232516.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:56.856Z,1513232516.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:56.871Z,1513232516.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:56.985Z,1513232516.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:57.254Z,1513232517.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:57.268Z,1513232517.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:57.654Z,1513232517.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:57.669Z,1513232517.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:57.781Z,1513232517.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:58.030Z,1513232518.030 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:21:58.070Z,1513232518.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:58.103Z,1513232518.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:58.446Z,1513232518.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:58.480Z,1513232518.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:58.577Z,1513232518.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:58.843Z,1513232518.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:58.875Z,1513232518.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:59.247Z,1513232519.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:59.284Z,1513232519.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:21:59.374Z,1513232519.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:59.651Z,1513232519.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:21:59.684Z,1513232519.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:00.045Z,1513232520.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:00.074Z,1513232520.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:00.169Z,1513232520.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:00.451Z,1513232520.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:00.477Z,1513232520.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:00.851Z,1513232520.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:00.886Z,1513232520.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:00.965Z,1513232520.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:01.246Z,1513232521.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:01.273Z,1513232521.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:01.647Z,1513232521.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:01.674Z,1513232521.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:02.046Z,1513232522.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:02.079Z,1513232522.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:02.450Z,1513232522.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:02.479Z,1513232522.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:02.479Z,1513232522.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2017-12-14T06:22:02.479Z,1513232522.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:22:02.481Z,1513232522.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:02.481Z,1513232522.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117
2017-12-14T06:22:02.481Z,1513232522.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:22:02.483Z,1513232522.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:02.483Z,1513232522.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2017-12-14T06:22:02.483Z,1513232522.483 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:22:02.495Z,1513232522.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:22:02.495Z,1513232522.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:22:02.495Z,1513232522.495 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:22:02.847Z,1513232522.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:02.893Z,1513232522.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:22:02.893Z,1513232522.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2017-12-14T06:22:02.894Z,1513232522.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:22:02.894Z,1513232522.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117
2017-12-14T06:22:02.894Z,1513232522.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:22:02.894Z,1513232522.894 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2017-12-14T06:22:03.254Z,1513232523.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:03.279Z,1513232523.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:22:03.280Z,1513232523.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:22:03.280Z,1513232523.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:22:03.280Z,1513232523.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:22:03.281Z,1513232523.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:22:03.281Z,1513232523.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:22:03.281Z,1513232523.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:22:03.282Z,1513232523.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:22:03.282Z,1513232523.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:22:03.648Z,1513232523.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:03.679Z,1513232523.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:04.048Z,1513232524.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:04.080Z,1513232524.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:04.480Z,1513232524.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:04.504Z,1513232524.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:04.857Z,1513232524.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:04.871Z,1513232524.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:05.250Z,1513232525.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:05.264Z,1513232525.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:05.652Z,1513232525.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:05.754Z,1513232525.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:06.058Z,1513232526.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:06.072Z,1513232526.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:06.458Z,1513232526.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:06.511Z,1513232526.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:06.550Z,1513232526.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:06.847Z,1513232526.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:06.880Z,1513232526.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:06.953Z,1513232526.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:07.247Z,1513232527.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:07.295Z,1513232527.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:07.357Z,1513232527.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:07.659Z,1513232527.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:07.678Z,1513232527.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:07.762Z,1513232527.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.047Z,1513232528.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.082Z,1513232528.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:08.165Z,1513232528.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.446Z,1513232528.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.475Z,1513232528.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:08.569Z,1513232528.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.871Z,1513232528.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:08.887Z,1513232528.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:08.973Z,1513232528.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:09.242Z,1513232529.242 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:22:09.271Z,1513232529.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:09.289Z,1513232529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:09.378Z,1513232529.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:09.647Z,1513232529.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:09.679Z,1513232529.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:10.079Z,1513232530.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:10.094Z,1513232530.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:10.173Z,1513232530.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:10.475Z,1513232530.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:10.495Z,1513232530.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:10.881Z,1513232530.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:10.971Z,1513232530.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:11.007Z,1513232531.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:11.247Z,1513232531.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:11.267Z,1513232531.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:11.445Z,1513232531.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:11.649Z,1513232531.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:11.664Z,1513232531.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:12.047Z,1513232532.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:12.061Z,1513232532.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:12.241Z,1513232532.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:12.465Z,1513232532.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:12.492Z,1513232532.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:12.865Z,1513232532.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:12.891Z,1513232532.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:13.037Z,1513232533.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:13.270Z,1513232533.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:13.296Z,1513232533.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:13.441Z,1513232533.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:13.648Z,1513232533.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:13.663Z,1513232533.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:14.050Z,1513232534.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:14.085Z,1513232534.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:14.237Z,1513232534.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:14.458Z,1513232534.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:14.472Z,1513232534.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:14.854Z,1513232534.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:14.876Z,1513232534.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:15.033Z,1513232535.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:15.250Z,1513232535.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:15.283Z,1513232535.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:15.437Z,1513232535.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:15.671Z,1513232535.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:15.713Z,1513232535.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:16.074Z,1513232536.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:16.095Z,1513232536.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:16.233Z,1513232536.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:16.471Z,1513232536.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:16.486Z,1513232536.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:16.848Z,1513232536.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:16.875Z,1513232536.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:17.029Z,1513232537.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:17.258Z,1513232537.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:17.297Z,1513232537.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:17.434Z,1513232537.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:17.668Z,1513232537.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:17.685Z,1513232537.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:18.047Z,1513232538.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:18.072Z,1513232538.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:18.229Z,1513232538.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:18.466Z,1513232538.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:18.481Z,1513232538.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:18.874Z,1513232538.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:18.891Z,1513232538.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:19.025Z,1513232539.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:19.262Z,1513232539.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:19.295Z,1513232539.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:19.429Z,1513232539.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:19.644Z,1513232539.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:19.659Z,1513232539.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:20.055Z,1513232540.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:20.091Z,1513232540.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:20.225Z,1513232540.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:20.493Z,1513232540.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:20.508Z,1513232540.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:20.847Z,1513232540.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:20.862Z,1513232540.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:21.021Z,1513232541.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:21.262Z,1513232541.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:21.283Z,1513232541.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:21.425Z,1513232541.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:21.661Z,1513232541.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:21.695Z,1513232541.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:22.057Z,1513232542.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:22.088Z,1513232542.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:22.225Z,1513232542.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:22.454Z,1513232542.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:22.469Z,1513232542.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:22.858Z,1513232542.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:22.872Z,1513232542.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:23.021Z,1513232543.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:23.256Z,1513232543.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:23.271Z,1513232543.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:23.425Z,1513232543.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:23.670Z,1513232543.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:23.700Z,1513232543.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:24.061Z,1513232544.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:24.083Z,1513232544.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:24.221Z,1513232544.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:24.470Z,1513232544.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:24.484Z,1513232544.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:24.857Z,1513232544.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:24.872Z,1513232544.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:25.019Z,1513232545.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:25.260Z,1513232545.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:25.282Z,1513232545.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:25.425Z,1513232545.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:25.663Z,1513232545.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:25.683Z,1513232545.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:26.060Z,1513232546.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:26.076Z,1513232546.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:26.221Z,1513232546.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:26.471Z,1513232546.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:26.548Z,1513232546.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:26.855Z,1513232546.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:26.998Z,1513232546.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:27.018Z,1513232547.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:27.266Z,1513232547.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:27.320Z,1513232547.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:27.465Z,1513232547.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:27.655Z,1513232547.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:27.693Z,1513232547.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:28.044Z,1513232548.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:28.099Z,1513232548.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:28.261Z,1513232548.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:28.452Z,1513232548.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:28.468Z,1513232548.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:28.853Z,1513232548.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:28.868Z,1513232548.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:29.045Z,1513232549.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:29.256Z,1513232549.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:29.271Z,1513232549.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:29.669Z,1513232549.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:29.702Z,1513232549.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:30.061Z,1513232550.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:30.075Z,1513232550.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:30.458Z,1513232550.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:30.474Z,1513232550.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:30.859Z,1513232550.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:30.879Z,1513232550.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:31.257Z,1513232551.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:31.271Z,1513232551.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:31.658Z,1513232551.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:31.672Z,1513232551.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:32.055Z,1513232552.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:32.075Z,1513232552.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:32.470Z,1513232552.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:32.484Z,1513232552.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:32.862Z,1513232552.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:32.876Z,1513232552.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:33.277Z,1513232553.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:33.309Z,1513232553.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:33.655Z,1513232553.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:33.670Z,1513232553.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:34.057Z,1513232554.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:34.071Z,1513232554.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:34.457Z,1513232554.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:34.479Z,1513232554.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:34.854Z,1513232554.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:34.899Z,1513232554.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:35.252Z,1513232555.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:35.267Z,1513232555.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:35.662Z,1513232555.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:35.677Z,1513232555.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:35.840Z,1513232555.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:36.062Z,1513232556.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:36.076Z,1513232556.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:36.503Z,1513232556.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:36.559Z,1513232556.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:36.638Z,1513232556.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:36.848Z,1513232556.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:36.879Z,1513232556.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:37.117Z,1513232557.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:37.247Z,1513232557.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:37.281Z,1513232557.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:37.652Z,1513232557.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:37.677Z,1513232557.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:37.913Z,1513232557.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:38.047Z,1513232558.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:38.079Z,1513232558.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:38.082Z,1513232558.082 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T06:17:38.0Z
2017-12-14T06:22:38.082Z,1513232558.082 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:22:38.083Z,1513232558.083 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:22:38.470Z,1513232558.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:38.484Z,1513232558.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:38.710Z,1513232558.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:39.334Z,1513232559.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:39.350Z,1513232559.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:39.421Z,1513232559.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:40.217Z,1513232560.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:41.016Z,1513232561.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:41.421Z,1513232561.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:42.218Z,1513232562.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:42.738Z,1513232562.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:42.835Z,1513232562.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:42.937Z,1513232562.937 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0136.lzma
2017-12-14T06:22:42.972Z,1513232562.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:43.004Z,1513232563.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:43.014Z,1513232563.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:43.303Z,1513232563.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:43.330Z,1513232563.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:22:43.417Z,1513232563.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:43.679Z,1513232563.679 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0136.lzma.bak
2017-12-14T06:22:43.679Z,1513232563.679 [DataOverHttps](INFO): SBD MOMSN=5438062
2017-12-14T06:22:43.722Z,1513232563.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:22:43.758Z,1513232563.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:06.413Z,1513232586.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:06.424Z,1513232586.424 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:23:06.424Z,1513232586.424 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:23:06.424Z,1513232586.424 [BPC1](ERROR): Communications Fault
2017-12-14T06:23:06.433Z,1513232586.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:06.475Z,1513232586.475 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:23:06.561Z,1513232586.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:06.600Z,1513232586.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:10.162Z,1513232590.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:10.178Z,1513232590.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:10.287Z,1513232590.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:10.331Z,1513232590.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:10.344Z,1513232590.344 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:23:10.344Z,1513232590.344 [BPC1] No Fault, FailCount= 1
2017-12-14T06:23:10.671Z,1513232590.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:10.783Z,1513232590.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:11.055Z,1513232591.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:11.075Z,1513232591.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:11.448Z,1513232591.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:11.463Z,1513232591.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:11.876Z,1513232591.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:11.904Z,1513232591.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:15.393Z,1513232595.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:15.407Z,1513232595.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:15.487Z,1513232595.487 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0137.lzma
2017-12-14T06:23:15.528Z,1513232595.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:15.556Z,1513232595.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:15.898Z,1513232595.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:15.930Z,1513232595.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:16.255Z,1513232596.255 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0137.lzma.bak
2017-12-14T06:23:16.255Z,1513232596.255 [DataOverHttps](INFO): SBD MOMSN=5438070
2017-12-14T06:23:16.302Z,1513232596.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:16.323Z,1513232596.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:17.543Z,1513232597.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:17.582Z,1513232597.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:17.585Z,1513232597.585 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:23:17.585Z,1513232597.585 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:23:17.586Z,1513232597.586 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:23:17.692Z,1513232597.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:17.707Z,1513232597.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:21.375Z,1513232601.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:21.431Z,1513232601.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:21.535Z,1513232601.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:21.574Z,1513232601.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:21.894Z,1513232601.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:21.908Z,1513232601.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:22.290Z,1513232602.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:22.304Z,1513232602.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:22.690Z,1513232602.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:22.705Z,1513232602.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:23.087Z,1513232603.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:23.102Z,1513232603.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:23.489Z,1513232603.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:23.504Z,1513232603.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:23.894Z,1513232603.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:23.908Z,1513232603.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:24.290Z,1513232604.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:24.305Z,1513232604.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:24.689Z,1513232604.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:24.704Z,1513232604.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:25.089Z,1513232605.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:25.104Z,1513232605.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:25.489Z,1513232605.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:25.505Z,1513232605.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:25.888Z,1513232605.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:25.902Z,1513232605.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:26.290Z,1513232606.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:26.305Z,1513232606.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:26.696Z,1513232606.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:26.731Z,1513232606.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:27.098Z,1513232607.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:27.114Z,1513232607.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:27.495Z,1513232607.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:27.510Z,1513232607.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:27.891Z,1513232607.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:27.907Z,1513232607.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:28.298Z,1513232608.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:28.314Z,1513232608.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:28.696Z,1513232608.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:28.712Z,1513232608.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:29.094Z,1513232609.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:29.117Z,1513232609.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:29.494Z,1513232609.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:29.508Z,1513232609.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:29.893Z,1513232609.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:29.944Z,1513232609.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:30.299Z,1513232610.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:30.314Z,1513232610.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:30.702Z,1513232610.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:30.723Z,1513232610.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:31.102Z,1513232611.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:31.116Z,1513232611.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:31.493Z,1513232611.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:31.508Z,1513232611.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:31.897Z,1513232611.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:31.918Z,1513232611.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:32.297Z,1513232612.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:32.317Z,1513232612.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:32.724Z,1513232612.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:32.751Z,1513232612.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:33.116Z,1513232613.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:33.179Z,1513232613.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:33.480Z,1513232613.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:33.505Z,1513232613.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:33.879Z,1513232613.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:33.931Z,1513232613.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:34.307Z,1513232614.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:34.322Z,1513232614.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:34.707Z,1513232614.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:34.727Z,1513232614.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:35.098Z,1513232615.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:35.158Z,1513232615.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:35.479Z,1513232615.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:35.505Z,1513232615.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:35.876Z,1513232615.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:35.923Z,1513232615.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:36.314Z,1513232616.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:36.361Z,1513232616.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:36.703Z,1513232616.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:36.717Z,1513232616.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:37.100Z,1513232617.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:37.121Z,1513232617.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:37.479Z,1513232617.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:37.508Z,1513232617.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:37.883Z,1513232617.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:37.916Z,1513232617.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:38.302Z,1513232618.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:38.317Z,1513232618.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:38.701Z,1513232618.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:38.733Z,1513232618.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:39.105Z,1513232619.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:39.133Z,1513232619.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:39.489Z,1513232619.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:39.547Z,1513232619.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:39.887Z,1513232619.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:39.904Z,1513232619.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:40.333Z,1513232620.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:40.348Z,1513232620.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:40.697Z,1513232620.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:40.719Z,1513232620.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:41.098Z,1513232621.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:41.112Z,1513232621.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:41.490Z,1513232621.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:41.505Z,1513232621.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:41.880Z,1513232621.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:41.902Z,1513232621.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:42.292Z,1513232622.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:42.319Z,1513232622.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:42.701Z,1513232622.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:42.715Z,1513232622.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:43.102Z,1513232623.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:43.123Z,1513232623.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:43.503Z,1513232623.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:43.546Z,1513232623.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:43.887Z,1513232623.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:43.902Z,1513232623.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:44.297Z,1513232624.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:44.351Z,1513232624.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:44.700Z,1513232624.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:44.717Z,1513232624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:45.097Z,1513232625.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:45.120Z,1513232625.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:45.493Z,1513232625.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:45.550Z,1513232625.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:45.880Z,1513232625.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:45.915Z,1513232625.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:46.304Z,1513232626.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:46.319Z,1513232626.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:46.746Z,1513232626.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:46.792Z,1513232626.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:47.097Z,1513232627.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:47.111Z,1513232627.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:47.479Z,1513232627.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:47.514Z,1513232627.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:47.878Z,1513232627.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:47.911Z,1513232627.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:48.302Z,1513232628.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:48.322Z,1513232628.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:48.701Z,1513232628.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:48.729Z,1513232628.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:49.115Z,1513232629.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:49.140Z,1513232629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:49.482Z,1513232629.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:49.515Z,1513232629.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:49.879Z,1513232629.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:49.942Z,1513232629.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:50.298Z,1513232630.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:50.329Z,1513232630.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:50.702Z,1513232630.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:50.733Z,1513232630.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:51.103Z,1513232631.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:51.118Z,1513232631.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:51.494Z,1513232631.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:51.510Z,1513232631.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:51.896Z,1513232631.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:51.911Z,1513232631.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:52.304Z,1513232632.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:52.319Z,1513232632.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:52.707Z,1513232632.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:52.727Z,1513232632.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:53.124Z,1513232633.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:53.169Z,1513232633.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:53.480Z,1513232633.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:53.512Z,1513232633.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:53.879Z,1513232633.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:53.915Z,1513232633.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:54.288Z,1513232634.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:54.319Z,1513232634.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:54.710Z,1513232634.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:54.730Z,1513232634.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:55.105Z,1513232635.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:55.119Z,1513232635.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:55.482Z,1513232635.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:55.530Z,1513232635.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:55.879Z,1513232635.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:55.924Z,1513232635.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:56.295Z,1513232636.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:56.422Z,1513232636.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:56.703Z,1513232636.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:56.755Z,1513232636.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:57.102Z,1513232637.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:57.141Z,1513232637.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:57.505Z,1513232637.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:57.543Z,1513232637.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:57.891Z,1513232637.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:57.944Z,1513232637.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:58.303Z,1513232638.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:58.318Z,1513232638.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:58.697Z,1513232638.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:58.732Z,1513232638.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:59.101Z,1513232639.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:59.132Z,1513232639.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:59.489Z,1513232639.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:59.504Z,1513232639.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:23:59.890Z,1513232639.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:23:59.914Z,1513232639.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:00.297Z,1513232640.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:00.311Z,1513232640.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:00.736Z,1513232640.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:00.755Z,1513232640.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:01.100Z,1513232641.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:01.124Z,1513232641.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:01.493Z,1513232641.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:01.507Z,1513232641.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:01.893Z,1513232641.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:01.915Z,1513232641.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:02.302Z,1513232642.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:02.323Z,1513232642.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:02.701Z,1513232642.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:02.715Z,1513232642.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:03.110Z,1513232643.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:03.162Z,1513232643.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:03.491Z,1513232643.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:03.506Z,1513232643.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:03.887Z,1513232643.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:04.015Z,1513232644.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:04.303Z,1513232644.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:04.323Z,1513232644.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:04.706Z,1513232644.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:04.727Z,1513232644.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:05.113Z,1513232645.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:05.128Z,1513232645.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:05.480Z,1513232645.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:05.508Z,1513232645.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:05.880Z,1513232645.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:05.946Z,1513232645.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:06.320Z,1513232646.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:06.397Z,1513232646.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:06.709Z,1513232646.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:06.724Z,1513232646.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:07.094Z,1513232647.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:07.121Z,1513232647.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:07.488Z,1513232647.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:07.520Z,1513232647.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:07.887Z,1513232647.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:07.901Z,1513232647.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:08.298Z,1513232648.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:08.330Z,1513232648.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:08.705Z,1513232648.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:08.736Z,1513232648.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:09.097Z,1513232649.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:09.130Z,1513232649.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:09.503Z,1513232649.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:09.538Z,1513232649.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:09.889Z,1513232649.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:09.904Z,1513232649.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:10.297Z,1513232650.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:10.331Z,1513232650.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:10.706Z,1513232650.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:10.736Z,1513232650.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:11.094Z,1513232651.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:11.108Z,1513232651.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:11.488Z,1513232651.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:11.520Z,1513232651.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:11.886Z,1513232651.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:11.907Z,1513232651.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:12.289Z,1513232652.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:12.305Z,1513232652.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:12.706Z,1513232652.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:12.748Z,1513232652.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:13.099Z,1513232653.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:13.113Z,1513232653.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:13.487Z,1513232653.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:13.514Z,1513232653.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:13.895Z,1513232653.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:13.910Z,1513232653.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:14.302Z,1513232654.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:14.323Z,1513232654.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:14.726Z,1513232654.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:14.773Z,1513232654.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:15.102Z,1513232655.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:15.124Z,1513232655.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:15.490Z,1513232655.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:15.505Z,1513232655.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:15.878Z,1513232655.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:15.959Z,1513232655.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:16.301Z,1513232656.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:16.332Z,1513232656.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:16.695Z,1513232656.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:16.710Z,1513232656.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:17.107Z,1513232657.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:17.137Z,1513232657.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:17.488Z,1513232657.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:17.496Z,1513232657.496 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T06:24:17.496Z,1513232657.496 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:24:17.496Z,1513232657.496 [BPC1](ERROR): Data Fault
2017-12-14T06:24:17.504Z,1513232657.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:17.535Z,1513232657.535 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:24:17.888Z,1513232657.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:17.903Z,1513232657.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:18.298Z,1513232658.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:18.314Z,1513232658.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:21.833Z,1513232661.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:21.847Z,1513232661.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:21.860Z,1513232661.860 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:24:21.861Z,1513232661.861 [BPC1] No Fault, FailCount= 1
2017-12-14T06:24:21.962Z,1513232661.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:22.051Z,1513232662.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:22.313Z,1513232662.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:22.356Z,1513232662.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:22.707Z,1513232662.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:22.722Z,1513232662.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:23.105Z,1513232663.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:23.120Z,1513232663.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:23.506Z,1513232663.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:23.520Z,1513232663.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:23.909Z,1513232663.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:23.923Z,1513232663.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:24.306Z,1513232664.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:24.327Z,1513232664.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:24.701Z,1513232664.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:24.717Z,1513232664.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:25.104Z,1513232665.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:25.119Z,1513232665.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:25.522Z,1513232665.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:25.555Z,1513232665.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:25.904Z,1513232665.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:25.919Z,1513232665.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:26.315Z,1513232666.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:26.329Z,1513232666.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:26.729Z,1513232666.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:26.766Z,1513232666.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:27.110Z,1513232667.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:27.135Z,1513232667.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:27.505Z,1513232667.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:27.519Z,1513232667.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:27.901Z,1513232667.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:27.923Z,1513232667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:28.318Z,1513232668.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:28.333Z,1513232668.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:28.782Z,1513232668.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:28.831Z,1513232668.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:29.119Z,1513232669.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:29.158Z,1513232669.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:29.500Z,1513232669.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:29.523Z,1513232669.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:29.906Z,1513232669.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:29.927Z,1513232669.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:30.319Z,1513232670.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:30.379Z,1513232670.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:30.719Z,1513232670.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:30.735Z,1513232670.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:31.120Z,1513232671.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:31.135Z,1513232671.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:31.512Z,1513232671.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:31.527Z,1513232671.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:31.895Z,1513232671.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:31.971Z,1513232671.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:32.319Z,1513232672.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:32.334Z,1513232672.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:32.724Z,1513232672.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:32.740Z,1513232672.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:33.118Z,1513232673.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:33.140Z,1513232673.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:33.500Z,1513232673.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:33.527Z,1513232673.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:33.892Z,1513232673.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:33.927Z,1513232673.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:34.318Z,1513232674.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:34.334Z,1513232674.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:34.709Z,1513232674.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:34.739Z,1513232674.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:35.121Z,1513232675.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:35.154Z,1513232675.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:35.497Z,1513232675.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:35.511Z,1513232675.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:35.896Z,1513232675.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:35.926Z,1513232675.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:36.306Z,1513232676.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:36.339Z,1513232676.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:36.713Z,1513232676.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:36.738Z,1513232676.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:37.114Z,1513232677.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:37.136Z,1513232677.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:37.502Z,1513232677.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:37.535Z,1513232677.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:37.903Z,1513232677.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:37.940Z,1513232677.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:38.339Z,1513232678.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:38.399Z,1513232678.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:38.713Z,1513232678.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:38.742Z,1513232678.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:39.114Z,1513232679.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:39.137Z,1513232679.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:39.502Z,1513232679.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:39.517Z,1513232679.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:39.903Z,1513232679.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:39.923Z,1513232679.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:40.310Z,1513232680.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:40.325Z,1513232680.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:40.718Z,1513232680.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:40.756Z,1513232680.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:41.114Z,1513232681.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:41.146Z,1513232681.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:41.522Z,1513232681.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:41.562Z,1513232681.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:41.913Z,1513232681.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:41.928Z,1513232681.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:42.310Z,1513232682.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:42.394Z,1513232682.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:42.722Z,1513232682.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:42.764Z,1513232682.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:43.118Z,1513232683.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:43.136Z,1513232683.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:43.496Z,1513232683.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:43.559Z,1513232683.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:43.895Z,1513232683.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:43.927Z,1513232683.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:44.322Z,1513232684.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:44.371Z,1513232684.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:44.730Z,1513232684.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:44.775Z,1513232684.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:45.114Z,1513232685.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:45.129Z,1513232685.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:45.496Z,1513232685.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:45.522Z,1513232685.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:45.892Z,1513232685.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:45.918Z,1513232685.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:46.186Z,1513232686.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:46.314Z,1513232686.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:46.328Z,1513232686.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:46.716Z,1513232686.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:46.739Z,1513232686.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:46.982Z,1513232686.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:47.116Z,1513232687.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:47.130Z,1513232687.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:47.385Z,1513232687.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:47.508Z,1513232687.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:47.524Z,1513232687.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:47.895Z,1513232687.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:47.920Z,1513232687.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:48.314Z,1513232688.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:48.328Z,1513232688.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:48.718Z,1513232688.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:48.733Z,1513232688.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:49.119Z,1513232689.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:49.134Z,1513232689.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:49.510Z,1513232689.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:49.525Z,1513232689.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:49.894Z,1513232689.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:49.928Z,1513232689.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:50.321Z,1513232690.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:50.336Z,1513232690.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:50.717Z,1513232690.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:50.732Z,1513232690.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:51.148Z,1513232691.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:51.172Z,1513232691.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:51.496Z,1513232691.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:51.524Z,1513232691.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:51.892Z,1513232691.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:51.922Z,1513232691.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:52.295Z,1513232692.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:52.329Z,1513232692.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:52.696Z,1513232692.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:52.766Z,1513232692.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:53.099Z,1513232693.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:53.124Z,1513232693.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:53.512Z,1513232693.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:53.540Z,1513232693.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:53.924Z,1513232693.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:53.939Z,1513232693.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:54.321Z,1513232694.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:54.354Z,1513232694.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:54.695Z,1513232694.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:54.731Z,1513232694.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:55.093Z,1513232695.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:55.119Z,1513232695.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:55.496Z,1513232695.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:55.531Z,1513232695.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:55.895Z,1513232695.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:55.921Z,1513232695.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:56.322Z,1513232696.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:56.337Z,1513232696.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:56.726Z,1513232696.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:56.763Z,1513232696.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:57.112Z,1513232697.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:57.128Z,1513232697.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:57.509Z,1513232697.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:57.523Z,1513232697.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:57.895Z,1513232697.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:57.926Z,1513232697.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:58.311Z,1513232698.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:58.331Z,1513232698.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:58.720Z,1513232698.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:58.734Z,1513232698.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:59.121Z,1513232699.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:59.136Z,1513232699.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:59.496Z,1513232699.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:59.527Z,1513232699.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:24:59.908Z,1513232699.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:24:59.927Z,1513232699.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:00.182Z,1513232700.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:00.314Z,1513232700.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:00.329Z,1513232700.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:00.718Z,1513232700.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:00.732Z,1513232700.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:00.978Z,1513232700.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:01.120Z,1513232701.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:01.139Z,1513232701.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:01.385Z,1513232701.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:01.520Z,1513232701.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:01.559Z,1513232701.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:01.894Z,1513232701.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:01.931Z,1513232701.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:02.182Z,1513232702.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:02.318Z,1513232702.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:02.333Z,1513232702.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:02.718Z,1513232702.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:02.733Z,1513232702.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:02.977Z,1513232702.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:03.110Z,1513232703.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:03.136Z,1513232703.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:03.381Z,1513232703.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:03.497Z,1513232703.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:03.527Z,1513232703.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:03.528Z,1513232703.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2017-12-14T06:25:03.528Z,1513232703.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:25:03.530Z,1513232703.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:03.530Z,1513232703.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118
2017-12-14T06:25:03.530Z,1513232703.530 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:25:03.532Z,1513232703.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:03.532Z,1513232703.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2017-12-14T06:25:03.532Z,1513232703.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:25:03.552Z,1513232703.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:25:03.557Z,1513232703.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:25:03.558Z,1513232703.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:25:03.899Z,1513232703.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:03.954Z,1513232703.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:25:03.954Z,1513232703.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2017-12-14T06:25:03.955Z,1513232703.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:25:03.955Z,1513232703.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118
2017-12-14T06:25:03.955Z,1513232703.955 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:25:03.955Z,1513232703.955 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2017-12-14T06:25:04.313Z,1513232704.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:04.343Z,1513232704.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:25:04.343Z,1513232704.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:25:04.343Z,1513232704.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:25:04.344Z,1513232704.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:25:04.344Z,1513232704.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:25:04.345Z,1513232704.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:25:04.346Z,1513232704.346 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:25:04.346Z,1513232704.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:25:04.346Z,1513232704.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:25:04.765Z,1513232704.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:04.879Z,1513232704.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:05.114Z,1513232705.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:05.141Z,1513232705.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:05.506Z,1513232705.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:05.522Z,1513232705.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:05.905Z,1513232705.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:05.962Z,1513232705.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:06.319Z,1513232706.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:06.353Z,1513232706.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:06.709Z,1513232706.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:06.751Z,1513232706.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:07.117Z,1513232707.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:07.132Z,1513232707.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:07.506Z,1513232707.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:07.521Z,1513232707.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:07.906Z,1513232707.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:07.920Z,1513232707.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:08.313Z,1513232708.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:08.347Z,1513232708.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:08.710Z,1513232708.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:08.746Z,1513232708.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:09.118Z,1513232709.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:09.146Z,1513232709.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:09.542Z,1513232709.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:09.558Z,1513232709.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:09.905Z,1513232709.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:09.923Z,1513232709.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:10.310Z,1513232710.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:10.324Z,1513232710.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:10.743Z,1513232710.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:10.758Z,1513232710.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:11.135Z,1513232711.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:11.166Z,1513232711.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:11.523Z,1513232711.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:11.543Z,1513232711.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:11.901Z,1513232711.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:11.924Z,1513232711.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:12.299Z,1513232712.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:12.335Z,1513232712.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:12.703Z,1513232712.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:12.717Z,1513232712.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:13.100Z,1513232713.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:13.119Z,1513232713.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:13.515Z,1513232713.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:13.548Z,1513232713.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:13.921Z,1513232713.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:13.946Z,1513232713.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:14.350Z,1513232714.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:14.408Z,1513232714.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:14.702Z,1513232714.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:14.754Z,1513232714.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:15.107Z,1513232715.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:15.166Z,1513232715.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:15.510Z,1513232715.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:15.525Z,1513232715.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:15.907Z,1513232715.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:15.927Z,1513232715.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:16.182Z,1513232716.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:16.317Z,1513232716.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:16.332Z,1513232716.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:16.718Z,1513232716.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:16.739Z,1513232716.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:16.977Z,1513232716.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:17.119Z,1513232717.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:17.134Z,1513232717.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:17.381Z,1513232717.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:17.520Z,1513232717.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:17.543Z,1513232717.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:17.903Z,1513232717.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:17.928Z,1513232717.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:18.315Z,1513232718.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:18.346Z,1513232718.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:21.743Z,1513232721.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:21.767Z,1513232721.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:21.889Z,1513232721.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:21.923Z,1513232721.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:22.251Z,1513232722.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:22.267Z,1513232722.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:22.661Z,1513232722.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:22.690Z,1513232722.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:23.042Z,1513232723.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:23.067Z,1513232723.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:23.454Z,1513232723.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:23.469Z,1513232723.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:23.857Z,1513232723.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:23.872Z,1513232723.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:24.263Z,1513232724.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:24.283Z,1513232724.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:24.689Z,1513232724.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:24.716Z,1513232724.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:25.055Z,1513232725.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:25.083Z,1513232725.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:25.446Z,1513232725.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:25.461Z,1513232725.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:25.848Z,1513232725.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:25.867Z,1513232725.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:26.249Z,1513232726.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:26.271Z,1513232726.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:26.663Z,1513232726.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:26.692Z,1513232726.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:27.071Z,1513232727.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:27.135Z,1513232727.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:27.459Z,1513232727.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:27.512Z,1513232727.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:27.859Z,1513232727.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:27.879Z,1513232727.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:28.240Z,1513232728.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:28.291Z,1513232728.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:28.644Z,1513232728.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:28.671Z,1513232728.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:29.058Z,1513232729.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:29.119Z,1513232729.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:29.462Z,1513232729.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:29.477Z,1513232729.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:29.861Z,1513232729.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:29.875Z,1513232729.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:30.262Z,1513232730.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:30.319Z,1513232730.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:30.659Z,1513232730.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:30.698Z,1513232730.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:31.053Z,1513232731.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:31.068Z,1513232731.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:31.442Z,1513232731.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:31.465Z,1513232731.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:31.852Z,1513232731.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:31.867Z,1513232731.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:32.254Z,1513232732.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:32.268Z,1513232732.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:32.680Z,1513232732.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:32.701Z,1513232732.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:33.062Z,1513232733.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:33.076Z,1513232733.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:33.486Z,1513232733.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:33.530Z,1513232733.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:33.832Z,1513232733.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:33.858Z,1513232733.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:34.249Z,1513232734.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:34.271Z,1513232734.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:34.670Z,1513232734.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:34.710Z,1513232734.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:35.052Z,1513232735.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:35.067Z,1513232735.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:35.458Z,1513232735.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:35.473Z,1513232735.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:35.859Z,1513232735.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:35.873Z,1513232735.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:36.257Z,1513232736.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:36.276Z,1513232736.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:36.738Z,1513232736.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:36.777Z,1513232736.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:37.050Z,1513232737.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:37.066Z,1513232737.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:37.457Z,1513232737.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:37.507Z,1513232737.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:37.844Z,1513232737.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:37.871Z,1513232737.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:38.247Z,1513232738.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:38.264Z,1513232738.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:38.701Z,1513232738.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:38.744Z,1513232738.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:39.058Z,1513232739.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:39.088Z,1513232739.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:39.461Z,1513232739.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:39.494Z,1513232739.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:39.840Z,1513232739.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:39.860Z,1513232739.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:40.248Z,1513232740.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:40.271Z,1513232740.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:40.654Z,1513232740.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:40.668Z,1513232740.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:41.062Z,1513232741.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:41.078Z,1513232741.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:41.457Z,1513232741.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:41.479Z,1513232741.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:41.858Z,1513232741.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:41.873Z,1513232741.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:42.256Z,1513232742.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:42.291Z,1513232742.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:42.652Z,1513232742.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:42.681Z,1513232742.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:43.093Z,1513232743.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:43.124Z,1513232743.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:43.439Z,1513232743.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:43.465Z,1513232743.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:43.839Z,1513232743.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:43.873Z,1513232743.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:44.253Z,1513232744.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:44.269Z,1513232744.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:44.670Z,1513232744.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:44.687Z,1513232744.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:45.062Z,1513232745.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:45.078Z,1513232745.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:45.462Z,1513232745.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:45.478Z,1513232745.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:45.839Z,1513232745.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:45.872Z,1513232745.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:46.274Z,1513232746.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:46.311Z,1513232746.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:46.668Z,1513232746.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:46.688Z,1513232746.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:47.042Z,1513232747.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:47.075Z,1513232747.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:47.464Z,1513232747.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:47.479Z,1513232747.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:47.861Z,1513232747.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:47.883Z,1513232747.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:48.258Z,1513232748.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:48.272Z,1513232748.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:48.659Z,1513232748.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:48.687Z,1513232748.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:49.041Z,1513232749.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:49.076Z,1513232749.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:49.475Z,1513232749.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:49.579Z,1513232749.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:49.856Z,1513232749.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:49.883Z,1513232749.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:50.247Z,1513232750.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:50.274Z,1513232750.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:50.664Z,1513232750.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:50.731Z,1513232750.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:51.062Z,1513232751.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:51.083Z,1513232751.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:51.462Z,1513232751.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:51.511Z,1513232751.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:51.840Z,1513232751.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:51.856Z,1513232751.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:52.243Z,1513232752.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:52.260Z,1513232752.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:52.743Z,1513232752.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:52.763Z,1513232752.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:53.039Z,1513232753.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:53.071Z,1513232753.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:53.458Z,1513232753.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:53.480Z,1513232753.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:53.871Z,1513232753.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:53.886Z,1513232753.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:54.250Z,1513232754.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:54.282Z,1513232754.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:54.656Z,1513232754.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:54.680Z,1513232754.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:55.047Z,1513232755.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:55.086Z,1513232755.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:55.439Z,1513232755.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:55.459Z,1513232755.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:55.848Z,1513232755.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:55.863Z,1513232755.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:56.248Z,1513232756.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:56.263Z,1513232756.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:56.654Z,1513232756.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:56.685Z,1513232756.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:57.071Z,1513232757.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:57.103Z,1513232757.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:57.457Z,1513232757.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:57.489Z,1513232757.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:57.842Z,1513232757.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:57.856Z,1513232757.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:58.250Z,1513232758.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:58.267Z,1513232758.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:58.666Z,1513232758.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:58.696Z,1513232758.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:59.095Z,1513232759.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:59.139Z,1513232759.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:59.450Z,1513232759.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:59.467Z,1513232759.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:25:59.853Z,1513232759.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:25:59.900Z,1513232759.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:00.261Z,1513232760.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:00.292Z,1513232760.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:00.661Z,1513232760.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:00.692Z,1513232760.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:01.048Z,1513232761.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:01.072Z,1513232761.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:01.447Z,1513232761.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:01.471Z,1513232761.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:01.851Z,1513232761.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:01.866Z,1513232761.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:02.263Z,1513232762.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:02.318Z,1513232762.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:02.670Z,1513232762.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:02.692Z,1513232762.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:03.057Z,1513232763.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:03.072Z,1513232763.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:03.454Z,1513232763.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:03.468Z,1513232763.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:03.840Z,1513232763.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:03.862Z,1513232763.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:04.246Z,1513232764.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:04.261Z,1513232764.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:04.668Z,1513232764.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:04.697Z,1513232764.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:05.051Z,1513232765.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:05.066Z,1513232765.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:05.467Z,1513232765.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:05.495Z,1513232765.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:05.853Z,1513232765.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:05.875Z,1513232765.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:06.254Z,1513232766.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:06.269Z,1513232766.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:06.707Z,1513232766.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:06.742Z,1513232766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:07.043Z,1513232767.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:07.074Z,1513232767.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:07.452Z,1513232767.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:07.467Z,1513232767.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:07.844Z,1513232767.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:07.867Z,1513232767.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:08.248Z,1513232768.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:08.267Z,1513232768.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:08.692Z,1513232768.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:08.715Z,1513232768.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:09.059Z,1513232769.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:09.082Z,1513232769.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:09.462Z,1513232769.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:09.477Z,1513232769.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:09.839Z,1513232769.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:09.865Z,1513232769.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:10.244Z,1513232770.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:10.271Z,1513232770.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:10.639Z,1513232770.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:10.667Z,1513232770.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:11.039Z,1513232771.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:11.059Z,1513232771.059 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T06:26:11.059Z,1513232771.059 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:26:11.059Z,1513232771.059 [BPC1](ERROR): Data Fault
2017-12-14T06:26:11.067Z,1513232771.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:11.081Z,1513232771.081 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:26:11.454Z,1513232771.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:11.478Z,1513232771.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:11.884Z,1513232771.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:11.924Z,1513232771.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:12.258Z,1513232772.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:12.277Z,1513232772.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:12.291Z,1513232772.291 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:26:12.291Z,1513232772.291 [BPC1] No Fault, FailCount= 1
2017-12-14T06:26:12.663Z,1513232772.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:12.757Z,1513232772.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:13.044Z,1513232773.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:13.071Z,1513232773.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:13.444Z,1513232773.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:13.479Z,1513232773.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:13.840Z,1513232773.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:13.875Z,1513232773.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:14.243Z,1513232774.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:14.269Z,1513232774.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:14.674Z,1513232774.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:14.689Z,1513232774.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:15.070Z,1513232775.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:15.091Z,1513232775.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:15.465Z,1513232775.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:15.487Z,1513232775.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:15.836Z,1513232775.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:15.851Z,1513232775.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:16.243Z,1513232776.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:16.277Z,1513232776.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:16.679Z,1513232776.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:16.694Z,1513232776.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:17.055Z,1513232777.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:17.079Z,1513232777.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:17.472Z,1513232777.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:17.495Z,1513232777.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:17.854Z,1513232777.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:17.882Z,1513232777.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:18.278Z,1513232778.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:18.318Z,1513232778.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:18.658Z,1513232778.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:18.702Z,1513232778.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:24.780Z,1513232784.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:24.892Z,1513232784.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:25.099Z,1513232785.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:25.159Z,1513232785.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:25.481Z,1513232785.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:25.510Z,1513232785.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:25.884Z,1513232785.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:25.948Z,1513232785.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:26.298Z,1513232786.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:26.348Z,1513232786.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:26.669Z,1513232786.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:26.750Z,1513232786.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:27.062Z,1513232787.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:27.115Z,1513232787.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:27.475Z,1513232787.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:27.507Z,1513232787.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:27.878Z,1513232787.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:27.896Z,1513232787.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:28.319Z,1513232788.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:28.377Z,1513232788.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:28.679Z,1513232788.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:28.703Z,1513232788.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:29.085Z,1513232789.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:29.120Z,1513232789.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:29.475Z,1513232789.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:29.490Z,1513232789.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:29.859Z,1513232789.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:29.923Z,1513232789.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:30.282Z,1513232790.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:30.298Z,1513232790.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:30.678Z,1513232790.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:30.693Z,1513232790.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:31.088Z,1513232791.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:31.111Z,1513232791.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:31.512Z,1513232791.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:31.544Z,1513232791.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:31.872Z,1513232791.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:31.934Z,1513232791.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:32.279Z,1513232792.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:32.294Z,1513232792.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:32.688Z,1513232792.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:32.708Z,1513232792.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:33.091Z,1513232793.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:33.134Z,1513232793.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:33.476Z,1513232793.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:33.503Z,1513232793.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:33.860Z,1513232793.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:33.895Z,1513232793.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:34.287Z,1513232794.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:34.311Z,1513232794.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:34.733Z,1513232794.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:34.756Z,1513232794.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:35.071Z,1513232795.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:35.095Z,1513232795.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:35.506Z,1513232795.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:35.539Z,1513232795.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:35.916Z,1513232795.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:35.955Z,1513232795.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:36.282Z,1513232796.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:36.337Z,1513232796.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:36.680Z,1513232796.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:36.790Z,1513232796.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:37.098Z,1513232797.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:37.146Z,1513232797.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:37.468Z,1513232797.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:37.527Z,1513232797.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:37.863Z,1513232797.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:37.910Z,1513232797.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:38.285Z,1513232798.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:38.355Z,1513232798.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:38.683Z,1513232798.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:38.747Z,1513232798.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:39.088Z,1513232799.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:39.111Z,1513232799.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:39.463Z,1513232799.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:39.495Z,1513232799.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:39.860Z,1513232799.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:39.918Z,1513232799.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:40.275Z,1513232800.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:40.342Z,1513232800.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:40.691Z,1513232800.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:40.724Z,1513232800.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:41.072Z,1513232801.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:41.115Z,1513232801.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:41.462Z,1513232801.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:41.561Z,1513232801.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:41.870Z,1513232801.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:41.914Z,1513232801.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:42.272Z,1513232802.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:42.343Z,1513232802.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:42.675Z,1513232802.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:42.719Z,1513232802.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:43.100Z,1513232803.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:43.120Z,1513232803.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:43.466Z,1513232803.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:43.524Z,1513232803.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:43.857Z,1513232803.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:43.936Z,1513232803.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:44.284Z,1513232804.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:44.299Z,1513232804.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:44.681Z,1513232804.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:44.696Z,1513232804.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:45.074Z,1513232805.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:45.115Z,1513232805.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:45.460Z,1513232805.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:45.475Z,1513232805.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:45.867Z,1513232805.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:45.903Z,1513232805.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:46.276Z,1513232806.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:46.308Z,1513232806.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:46.679Z,1513232806.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:46.758Z,1513232806.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:47.074Z,1513232807.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:47.097Z,1513232807.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:47.471Z,1513232807.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:47.485Z,1513232807.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:47.891Z,1513232807.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:47.922Z,1513232807.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:48.274Z,1513232808.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:48.291Z,1513232808.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:48.722Z,1513232808.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:48.741Z,1513232808.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:49.080Z,1513232809.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:49.117Z,1513232809.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:49.467Z,1513232809.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:49.486Z,1513232809.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:49.873Z,1513232809.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:49.888Z,1513232809.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:50.279Z,1513232810.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:50.299Z,1513232810.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:50.678Z,1513232810.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:50.693Z,1513232810.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:51.098Z,1513232811.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:51.131Z,1513232811.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:51.464Z,1513232811.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:51.495Z,1513232811.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:51.863Z,1513232811.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:51.903Z,1513232811.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:52.278Z,1513232812.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:52.305Z,1513232812.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:52.671Z,1513232812.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:52.698Z,1513232812.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:53.088Z,1513232813.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:53.112Z,1513232813.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:53.471Z,1513232813.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:53.487Z,1513232813.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:53.866Z,1513232813.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:53.882Z,1513232813.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:54.298Z,1513232814.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:54.326Z,1513232814.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:54.674Z,1513232814.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:54.720Z,1513232814.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:55.075Z,1513232815.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:55.090Z,1513232815.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:55.468Z,1513232815.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:55.483Z,1513232815.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:55.859Z,1513232815.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:55.891Z,1513232815.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:56.287Z,1513232816.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:56.307Z,1513232816.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:56.686Z,1513232816.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:56.702Z,1513232816.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:57.088Z,1513232817.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:57.115Z,1513232817.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:57.496Z,1513232817.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:57.532Z,1513232817.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:57.859Z,1513232817.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:57.891Z,1513232817.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:58.285Z,1513232818.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:58.358Z,1513232818.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:58.684Z,1513232818.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:58.748Z,1513232818.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:59.094Z,1513232819.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:59.131Z,1513232819.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:59.465Z,1513232819.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:59.511Z,1513232819.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:26:59.867Z,1513232819.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:26:59.898Z,1513232819.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:00.296Z,1513232820.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:00.351Z,1513232820.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:00.711Z,1513232820.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:00.750Z,1513232820.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:01.080Z,1513232821.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:01.095Z,1513232821.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:01.464Z,1513232821.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:01.495Z,1513232821.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:01.864Z,1513232821.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:01.878Z,1513232821.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:02.265Z,1513232822.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:02.301Z,1513232822.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:02.712Z,1513232822.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:02.736Z,1513232822.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:03.076Z,1513232823.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:03.091Z,1513232823.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:03.470Z,1513232823.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:03.491Z,1513232823.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:03.897Z,1513232823.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:03.928Z,1513232823.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:04.279Z,1513232824.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:04.299Z,1513232824.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:04.672Z,1513232824.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:04.750Z,1513232824.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:05.099Z,1513232825.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:05.127Z,1513232825.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:05.471Z,1513232825.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:05.485Z,1513232825.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:05.866Z,1513232825.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:05.880Z,1513232825.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:06.280Z,1513232826.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:06.295Z,1513232826.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:06.678Z,1513232826.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:06.692Z,1513232826.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:07.076Z,1513232827.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:07.109Z,1513232827.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:07.476Z,1513232827.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:07.503Z,1513232827.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:07.859Z,1513232827.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:07.873Z,1513232827.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:08.270Z,1513232828.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:08.360Z,1513232828.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:08.689Z,1513232828.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:08.735Z,1513232828.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:09.075Z,1513232829.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:09.090Z,1513232829.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:09.468Z,1513232829.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:09.484Z,1513232829.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:09.876Z,1513232829.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:09.892Z,1513232829.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:10.304Z,1513232830.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:10.386Z,1513232830.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:10.686Z,1513232830.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:10.713Z,1513232830.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:11.078Z,1513232831.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:11.092Z,1513232831.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:11.470Z,1513232831.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:11.485Z,1513232831.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:11.861Z,1513232831.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:11.884Z,1513232831.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:12.277Z,1513232832.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:12.292Z,1513232832.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:12.679Z,1513232832.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:12.694Z,1513232832.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:13.079Z,1513232833.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:13.094Z,1513232833.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:13.487Z,1513232833.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:13.530Z,1513232833.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:13.856Z,1513232833.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:13.884Z,1513232833.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:14.278Z,1513232834.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:14.294Z,1513232834.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:14.688Z,1513232834.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:14.706Z,1513232834.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:15.084Z,1513232835.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:15.098Z,1513232835.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:15.532Z,1513232835.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:15.551Z,1513232835.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:15.875Z,1513232835.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:15.891Z,1513232835.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:16.283Z,1513232836.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:16.298Z,1513232836.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:16.733Z,1513232836.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:16.790Z,1513232836.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:17.069Z,1513232837.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:17.097Z,1513232837.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:17.459Z,1513232837.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:17.473Z,1513232837.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:17.921Z,1513232837.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:17.947Z,1513232837.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:18.267Z,1513232838.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:18.303Z,1513232838.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:18.678Z,1513232838.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:18.707Z,1513232838.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:22.252Z,1513232842.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:22.342Z,1513232842.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:22.455Z,1513232842.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:22.475Z,1513232842.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:22.823Z,1513232842.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:22.850Z,1513232842.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:23.232Z,1513232843.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:23.307Z,1513232843.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:23.625Z,1513232843.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:23.656Z,1513232843.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:24.018Z,1513232844.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:24.067Z,1513232844.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:24.427Z,1513232844.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:24.449Z,1513232844.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:24.829Z,1513232844.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:24.863Z,1513232844.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:25.227Z,1513232845.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:25.241Z,1513232845.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:25.618Z,1513232845.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:25.647Z,1513232845.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:26.022Z,1513232846.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:26.036Z,1513232846.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:26.465Z,1513232846.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:26.484Z,1513232846.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:26.807Z,1513232846.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:26.849Z,1513232846.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:27.225Z,1513232847.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:27.256Z,1513232847.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:27.632Z,1513232847.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:27.646Z,1513232847.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:28.037Z,1513232848.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:28.052Z,1513232848.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:28.418Z,1513232848.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:28.445Z,1513232848.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:28.818Z,1513232848.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:28.848Z,1513232848.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:29.220Z,1513232849.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:29.243Z,1513232849.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:29.629Z,1513232849.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:29.663Z,1513232849.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:30.026Z,1513232850.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:30.040Z,1513232850.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:30.437Z,1513232850.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:30.460Z,1513232850.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:30.834Z,1513232850.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:30.860Z,1513232850.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:31.216Z,1513232851.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:31.230Z,1513232851.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:31.619Z,1513232851.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:31.642Z,1513232851.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:32.025Z,1513232852.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:32.044Z,1513232852.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:32.430Z,1513232852.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:32.478Z,1513232852.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:32.830Z,1513232852.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:32.844Z,1513232852.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:33.242Z,1513232853.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:33.263Z,1513232853.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:33.624Z,1513232853.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:33.653Z,1513232853.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:34.020Z,1513232854.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:34.042Z,1513232854.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:34.416Z,1513232854.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:34.431Z,1513232854.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:34.821Z,1513232854.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:34.835Z,1513232854.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:35.232Z,1513232855.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:35.246Z,1513232855.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:35.629Z,1513232855.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:35.644Z,1513232855.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:36.029Z,1513232856.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:36.044Z,1513232856.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:36.424Z,1513232856.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:36.451Z,1513232856.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:36.813Z,1513232856.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:36.843Z,1513232856.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:37.214Z,1513232857.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:37.228Z,1513232857.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:37.613Z,1513232857.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:37.628Z,1513232857.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:38.020Z,1513232858.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:38.053Z,1513232858.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:38.429Z,1513232858.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:38.455Z,1513232858.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:38.838Z,1513232858.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:38.853Z,1513232858.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:39.257Z,1513232859.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:39.299Z,1513232859.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:39.624Z,1513232859.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:39.653Z,1513232859.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:40.030Z,1513232860.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:40.080Z,1513232860.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:40.415Z,1513232860.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:40.432Z,1513232860.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:40.816Z,1513232860.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:40.835Z,1513232860.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:41.219Z,1513232861.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:41.234Z,1513232861.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:41.626Z,1513232861.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:41.657Z,1513232861.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:42.033Z,1513232862.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:42.064Z,1513232862.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:42.426Z,1513232862.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:42.445Z,1513232862.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:42.818Z,1513232862.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:42.902Z,1513232862.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:43.213Z,1513232863.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:43.258Z,1513232863.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:43.617Z,1513232863.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:43.640Z,1513232863.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:44.017Z,1513232864.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:44.032Z,1513232864.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:44.431Z,1513232864.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:44.513Z,1513232864.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:44.825Z,1513232864.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:44.855Z,1513232864.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:45.235Z,1513232865.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:45.283Z,1513232865.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:45.622Z,1513232865.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:45.636Z,1513232865.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:46.007Z,1513232866.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:46.074Z,1513232866.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:46.427Z,1513232866.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:46.443Z,1513232866.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:46.825Z,1513232866.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:46.840Z,1513232866.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:47.219Z,1513232867.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:47.244Z,1513232867.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:47.637Z,1513232867.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:47.654Z,1513232867.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:48.032Z,1513232868.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:48.047Z,1513232868.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:48.434Z,1513232868.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:48.450Z,1513232868.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:48.826Z,1513232868.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:48.844Z,1513232868.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:49.208Z,1513232869.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:49.240Z,1513232869.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:49.626Z,1513232869.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:49.644Z,1513232869.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:50.032Z,1513232870.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:50.056Z,1513232870.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:50.433Z,1513232870.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:50.448Z,1513232870.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:50.833Z,1513232870.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:50.848Z,1513232870.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:51.232Z,1513232871.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:51.247Z,1513232871.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:51.625Z,1513232871.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:51.639Z,1513232871.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:52.012Z,1513232872.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:52.053Z,1513232872.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:52.426Z,1513232872.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:52.441Z,1513232872.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:52.845Z,1513232872.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:52.892Z,1513232872.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:53.212Z,1513232873.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:53.237Z,1513232873.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:53.637Z,1513232873.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:53.659Z,1513232873.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:54.038Z,1513232874.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:54.053Z,1513232874.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:54.433Z,1513232874.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:54.487Z,1513232874.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:54.813Z,1513232874.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:54.838Z,1513232874.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:55.215Z,1513232875.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:55.241Z,1513232875.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:55.615Z,1513232875.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:55.644Z,1513232875.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:56.047Z,1513232876.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:56.088Z,1513232876.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:56.431Z,1513232876.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:56.446Z,1513232876.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:56.836Z,1513232876.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:56.855Z,1513232876.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:57.233Z,1513232877.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:57.249Z,1513232877.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:57.612Z,1513232877.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:57.637Z,1513232877.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:58.012Z,1513232878.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:58.043Z,1513232878.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:58.417Z,1513232878.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:58.444Z,1513232878.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:58.810Z,1513232878.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:58.842Z,1513232878.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:59.234Z,1513232879.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:59.258Z,1513232879.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:27:59.638Z,1513232879.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:27:59.653Z,1513232879.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:00.039Z,1513232880.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:00.054Z,1513232880.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:00.423Z,1513232880.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:00.449Z,1513232880.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:00.816Z,1513232880.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:00.849Z,1513232880.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:01.221Z,1513232881.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:01.252Z,1513232881.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:01.618Z,1513232881.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:01.654Z,1513232881.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:02.019Z,1513232882.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:02.062Z,1513232882.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:02.465Z,1513232882.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:02.504Z,1513232882.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:02.852Z,1513232882.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:02.930Z,1513232882.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:03.230Z,1513232883.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:03.260Z,1513232883.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:03.621Z,1513232883.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:03.635Z,1513232883.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:04.021Z,1513232884.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:04.036Z,1513232884.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:04.420Z,1513232884.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:04.439Z,1513232884.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:04.439Z,1513232884.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2017-12-14T06:28:04.439Z,1513232884.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:28:04.441Z,1513232884.441 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:04.441Z,1513232884.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119
2017-12-14T06:28:04.441Z,1513232884.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:28:04.443Z,1513232884.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:04.443Z,1513232884.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2017-12-14T06:28:04.443Z,1513232884.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:28:04.489Z,1513232884.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:28:04.489Z,1513232884.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:28:04.490Z,1513232884.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:28:04.822Z,1513232884.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:04.879Z,1513232884.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:28:04.879Z,1513232884.879 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2017-12-14T06:28:04.880Z,1513232884.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:28:04.880Z,1513232884.880 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119
2017-12-14T06:28:04.880Z,1513232884.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:28:04.880Z,1513232884.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2017-12-14T06:28:05.220Z,1513232885.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:05.242Z,1513232885.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:28:05.242Z,1513232885.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:28:05.242Z,1513232885.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:28:05.243Z,1513232885.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:28:05.243Z,1513232885.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:28:05.243Z,1513232885.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:28:05.244Z,1513232885.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:28:05.244Z,1513232885.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:28:05.244Z,1513232885.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:28:05.640Z,1513232885.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:05.663Z,1513232885.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:06.036Z,1513232886.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:06.059Z,1513232886.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:06.434Z,1513232886.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:06.510Z,1513232886.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:06.820Z,1513232886.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:06.847Z,1513232886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:07.213Z,1513232887.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:07.254Z,1513232887.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:07.623Z,1513232887.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:07.678Z,1513232887.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:08.077Z,1513232888.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:08.193Z,1513232888.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:08.427Z,1513232888.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:08.479Z,1513232888.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:08.876Z,1513232888.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:08.895Z,1513232888.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:09.226Z,1513232889.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:09.240Z,1513232889.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:09.621Z,1513232889.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:09.635Z,1513232889.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:10.018Z,1513232890.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:10.039Z,1513232890.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:10.420Z,1513232890.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:10.441Z,1513232890.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:10.821Z,1513232890.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:10.837Z,1513232890.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:11.220Z,1513232891.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:11.235Z,1513232891.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:11.630Z,1513232891.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:11.653Z,1513232891.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:12.087Z,1513232892.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:12.138Z,1513232892.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:12.434Z,1513232892.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:12.448Z,1513232892.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:12.820Z,1513232892.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:12.834Z,1513232892.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:13.207Z,1513232893.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:13.247Z,1513232893.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:13.621Z,1513232893.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:13.642Z,1513232893.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:14.023Z,1513232894.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:14.043Z,1513232894.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:14.438Z,1513232894.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:14.453Z,1513232894.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:14.825Z,1513232894.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:14.852Z,1513232894.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:15.232Z,1513232895.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:15.259Z,1513232895.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:15.611Z,1513232895.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:15.646Z,1513232895.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:16.008Z,1513232896.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:16.042Z,1513232896.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:16.407Z,1513232896.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:16.440Z,1513232896.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:16.831Z,1513232896.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:16.885Z,1513232896.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:17.221Z,1513232897.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:17.244Z,1513232897.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:17.630Z,1513232897.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:17.655Z,1513232897.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:18.058Z,1513232898.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:18.079Z,1513232898.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:18.082Z,1513232898.082 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:28:18.082Z,1513232898.082 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:28:18.082Z,1513232898.082 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:28:18.082Z,1513232898.082 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:28:18.437Z,1513232898.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:18.462Z,1513232898.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:18.469Z,1513232898.469 [Default:CheckIn:D] Stopped
2017-12-14T06:28:18.469Z,1513232898.469 [Default:CheckIn:E] Running Loop=1
2017-12-14T06:28:18.815Z,1513232898.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:18.835Z,1513232898.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 355.051335 min 
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn:E] Stopped
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn] Stopped
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn](INFO): Running loop #35
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn] Running Loop=35
2017-12-14T06:28:18.839Z,1513232898.839 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T06:28:18.885Z,1513232898.885 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T06:28:22.282Z,1513232902.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:22.297Z,1513232902.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:22.404Z,1513232902.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:22.428Z,1513232902.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:22.828Z,1513232902.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:22.851Z,1513232902.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:23.208Z,1513232903.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:23.239Z,1513232903.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:23.586Z,1513232903.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:23.619Z,1513232903.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:23.989Z,1513232903.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:24.005Z,1513232904.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:24.390Z,1513232904.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:24.431Z,1513232904.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:24.829Z,1513232904.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:24.856Z,1513232904.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:25.191Z,1513232905.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:25.212Z,1513232905.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:25.599Z,1513232905.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:25.616Z,1513232905.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:25.994Z,1513232905.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:26.042Z,1513232906.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:26.395Z,1513232906.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:26.418Z,1513232906.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:26.793Z,1513232906.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:26.810Z,1513232906.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:27.197Z,1513232907.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:27.229Z,1513232907.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:27.595Z,1513232907.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:27.639Z,1513232907.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:28.012Z,1513232908.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:28.027Z,1513232908.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:28.394Z,1513232908.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:28.424Z,1513232908.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:28.807Z,1513232908.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:28.894Z,1513232908.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:29.197Z,1513232909.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:29.230Z,1513232909.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:29.587Z,1513232909.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:29.642Z,1513232909.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:30.001Z,1513232910.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:30.044Z,1513232910.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:30.391Z,1513232910.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:30.447Z,1513232910.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:30.782Z,1513232910.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:30.834Z,1513232910.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:31.226Z,1513232911.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:31.249Z,1513232911.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:31.618Z,1513232911.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:31.632Z,1513232911.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:31.994Z,1513232911.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:32.021Z,1513232912.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:32.398Z,1513232912.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:32.439Z,1513232912.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:32.787Z,1513232912.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:32.809Z,1513232912.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:33.186Z,1513232913.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:33.208Z,1513232913.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:33.596Z,1513232913.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:33.610Z,1513232913.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:33.990Z,1513232913.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:34.032Z,1513232914.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:34.415Z,1513232914.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:34.438Z,1513232914.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:34.798Z,1513232914.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:34.812Z,1513232914.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:35.200Z,1513232915.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:35.219Z,1513232915.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:35.591Z,1513232915.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:35.634Z,1513232915.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:35.991Z,1513232915.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:36.013Z,1513232916.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:36.386Z,1513232916.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:36.414Z,1513232916.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:36.794Z,1513232916.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:36.815Z,1513232916.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:37.184Z,1513232917.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:37.219Z,1513232917.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:37.608Z,1513232917.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:37.622Z,1513232917.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:38.006Z,1513232918.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:38.035Z,1513232918.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:38.407Z,1513232918.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:38.422Z,1513232918.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:38.779Z,1513232918.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:38.836Z,1513232918.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:39.180Z,1513232919.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:39.208Z,1513232919.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:39.580Z,1513232919.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:39.624Z,1513232919.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:39.980Z,1513232919.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:40.020Z,1513232920.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:40.398Z,1513232920.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:40.429Z,1513232920.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:40.811Z,1513232920.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:40.843Z,1513232920.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:41.218Z,1513232921.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:41.239Z,1513232921.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:41.587Z,1513232921.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:41.602Z,1513232921.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:41.979Z,1513232921.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:42.023Z,1513232922.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:42.376Z,1513232922.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:42.409Z,1513232922.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:42.778Z,1513232922.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:42.816Z,1513232922.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:43.183Z,1513232923.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:43.213Z,1513232923.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:43.612Z,1513232923.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:43.630Z,1513232923.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:44.016Z,1513232924.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:44.055Z,1513232924.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:44.420Z,1513232924.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:44.434Z,1513232924.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:44.787Z,1513232924.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:44.827Z,1513232924.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:45.184Z,1513232925.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:45.222Z,1513232925.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:45.584Z,1513232925.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:45.618Z,1513232925.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:45.981Z,1513232925.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:46.003Z,1513232926.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:46.401Z,1513232926.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:46.435Z,1513232926.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:46.802Z,1513232926.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:46.839Z,1513232926.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:47.208Z,1513232927.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:47.247Z,1513232927.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:47.592Z,1513232927.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:47.611Z,1513232927.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:48.006Z,1513232928.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:48.033Z,1513232928.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:48.394Z,1513232928.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:48.438Z,1513232928.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:48.802Z,1513232928.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:48.821Z,1513232928.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:49.196Z,1513232929.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:49.212Z,1513232929.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:49.608Z,1513232929.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:49.622Z,1513232929.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:50.002Z,1513232930.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:50.047Z,1513232930.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:50.410Z,1513232930.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:50.425Z,1513232930.425 [PNI_TCM](ERROR): CRC does not match. Expected:0x5528 got:0x7233
2017-12-14T06:28:50.459Z,1513232930.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:50.795Z,1513232930.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:50.887Z,1513232930.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:51.189Z,1513232931.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:51.226Z,1513232931.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:51.592Z,1513232931.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:51.655Z,1513232931.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:51.979Z,1513232931.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:52.011Z,1513232932.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:52.410Z,1513232932.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:52.455Z,1513232932.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:52.807Z,1513232932.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:52.822Z,1513232932.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:53.204Z,1513232933.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:53.226Z,1513232933.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:53.591Z,1513232933.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:53.631Z,1513232933.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:53.979Z,1513232933.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:54.002Z,1513232934.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x48424 got:0x15796
2017-12-14T06:28:54.020Z,1513232934.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:54.393Z,1513232934.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:54.419Z,1513232934.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:54.780Z,1513232934.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:54.809Z,1513232934.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:55.180Z,1513232935.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:55.214Z,1513232935.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:55.611Z,1513232935.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:55.631Z,1513232935.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:55.989Z,1513232935.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:56.016Z,1513232936.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:56.394Z,1513232936.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:56.428Z,1513232936.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:56.814Z,1513232936.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:56.837Z,1513232936.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:57.195Z,1513232937.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:57.212Z,1513232937.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:57.595Z,1513232937.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:57.610Z,1513232937.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:57.994Z,1513232937.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:58.028Z,1513232938.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:58.395Z,1513232938.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:58.433Z,1513232938.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:58.798Z,1513232938.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:58.880Z,1513232938.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:59.222Z,1513232939.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:59.251Z,1513232939.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:59.580Z,1513232939.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:28:59.623Z,1513232939.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:28:59.990Z,1513232939.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:00.027Z,1513232940.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:00.380Z,1513232940.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:00.423Z,1513232940.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:00.788Z,1513232940.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:00.854Z,1513232940.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:01.179Z,1513232941.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:01.224Z,1513232941.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:01.614Z,1513232941.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:01.628Z,1513232941.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:02.000Z,1513232942.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:02.026Z,1513232942.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:02.406Z,1513232942.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:02.431Z,1513232942.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:02.779Z,1513232942.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:02.827Z,1513232942.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:03.201Z,1513232943.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:03.254Z,1513232943.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:03.579Z,1513232943.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:03.617Z,1513232943.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:03.981Z,1513232943.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:04.012Z,1513232944.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:04.404Z,1513232944.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:04.428Z,1513232944.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:04.808Z,1513232944.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:04.828Z,1513232944.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:05.206Z,1513232945.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:05.232Z,1513232945.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:05.583Z,1513232945.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:05.613Z,1513232945.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:05.979Z,1513232945.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:06.006Z,1513232946.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:06.420Z,1513232946.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:06.461Z,1513232946.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:06.779Z,1513232946.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:06.819Z,1513232946.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:07.188Z,1513232947.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:07.219Z,1513232947.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:07.605Z,1513232947.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:07.627Z,1513232947.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:08.011Z,1513232948.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:08.043Z,1513232948.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:08.405Z,1513232948.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:08.427Z,1513232948.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:08.441Z,1513232948.441 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:29:08.808Z,1513232948.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:08.822Z,1513232948.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:09.192Z,1513232949.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:09.239Z,1513232949.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:09.582Z,1513232949.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:09.627Z,1513232949.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:09.000Z,1513232950.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:10.025Z,1513232950.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:10.400Z,1513232950.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:10.423Z,1513232950.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:10.797Z,1513232950.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:10.831Z,1513232950.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:11.200Z,1513232951.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:11.230Z,1513232951.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:11.586Z,1513232951.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:11.625Z,1513232951.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:11.987Z,1513232951.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:12.004Z,1513232952.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:12.382Z,1513232952.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:12.428Z,1513232952.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:12.787Z,1513232952.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:12.842Z,1513232952.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:13.162Z,1513232953.162 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T06:29:13.162Z,1513232953.162 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T06:29:13.162Z,1513232953.162 [DropWeight](ERROR): Hardware Fault
2017-12-14T06:29:13.179Z,1513232953.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:13.267Z,1513232953.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:13.291Z,1513232953.291 [CBIT](INFO): Critical error at 20171214T062913
2017-12-14T06:29:13.297Z,1513232953.297 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T06:29:13.297Z,1513232953.297 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T06:29:13.611Z,1513232953.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:13.625Z,1513232953.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:13.637Z,1513232953.637 [CBIT](INFO): Critical error at 20171214T062913
2017-12-14T06:29:14.009Z,1513232954.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:14.063Z,1513232954.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:14.407Z,1513232954.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:14.422Z,1513232954.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:14.778Z,1513232954.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:14.853Z,1513232954.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:15.179Z,1513232955.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:15.216Z,1513232955.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:15.583Z,1513232955.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:15.618Z,1513232955.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:15.986Z,1513232955.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:16.021Z,1513232956.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:16.395Z,1513232956.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:16.423Z,1513232956.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:16.801Z,1513232956.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:16.831Z,1513232956.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:17.197Z,1513232957.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:17.235Z,1513232957.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:17.585Z,1513232957.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:17.608Z,1513232957.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:17.989Z,1513232957.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:18.009Z,1513232958.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:18.390Z,1513232958.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:18.404Z,1513232958.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:18.787Z,1513232958.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:18.829Z,1513232958.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:19.221Z,1513232959.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:19.249Z,1513232959.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:22.585Z,1513232962.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:22.601Z,1513232962.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:22.766Z,1513232962.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:22.804Z,1513232962.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:23.116Z,1513232963.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:23.156Z,1513232963.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:23.516Z,1513232963.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:23.531Z,1513232963.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:23.910Z,1513232963.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:23.930Z,1513232963.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:24.318Z,1513232964.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:24.339Z,1513232964.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:24.722Z,1513232964.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:24.736Z,1513232964.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:25.119Z,1513232965.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:25.140Z,1513232965.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:25.516Z,1513232965.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:25.531Z,1513232965.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:25.913Z,1513232965.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:25.935Z,1513232965.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:26.326Z,1513232966.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:26.340Z,1513232966.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:26.726Z,1513232966.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:26.740Z,1513232966.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:27.123Z,1513232967.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:27.138Z,1513232967.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:27.515Z,1513232967.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:27.531Z,1513232967.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:27.904Z,1513232967.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:27.931Z,1513232967.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:28.322Z,1513232968.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:28.342Z,1513232968.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:28.724Z,1513232968.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:28.781Z,1513232968.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:29.137Z,1513232969.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:29.153Z,1513232969.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:29.514Z,1513232969.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:29.550Z,1513232969.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:29.906Z,1513232969.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:29.921Z,1513232969.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:30.311Z,1513232970.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:30.327Z,1513232970.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:30.714Z,1513232970.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:30.728Z,1513232970.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:31.112Z,1513232971.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:31.128Z,1513232971.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:31.515Z,1513232971.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:31.531Z,1513232971.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:31.974Z,1513232971.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:32.021Z,1513232972.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:32.314Z,1513232972.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:32.329Z,1513232972.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:32.719Z,1513232972.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:32.734Z,1513232972.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:33.123Z,1513232973.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:33.138Z,1513232973.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:33.515Z,1513232973.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:33.539Z,1513232973.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:33.914Z,1513232973.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:33.928Z,1513232973.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:34.321Z,1513232974.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:34.337Z,1513232974.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:34.734Z,1513232974.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:34.773Z,1513232974.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:35.148Z,1513232975.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:35.235Z,1513232975.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:35.509Z,1513232975.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:35.524Z,1513232975.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:35.911Z,1513232975.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:35.959Z,1513232975.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:36.321Z,1513232976.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:36.356Z,1513232976.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:36.740Z,1513232976.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:36.779Z,1513232976.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:37.126Z,1513232977.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:37.149Z,1513232977.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:37.511Z,1513232977.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:37.526Z,1513232977.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:37.911Z,1513232977.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:37.931Z,1513232977.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:38.312Z,1513232978.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:38.327Z,1513232978.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:38.710Z,1513232978.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:38.731Z,1513232978.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:39.112Z,1513232979.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:39.127Z,1513232979.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:39.522Z,1513232979.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:39.536Z,1513232979.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:39.923Z,1513232979.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:39.937Z,1513232979.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:40.317Z,1513232980.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:40.333Z,1513232980.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:40.714Z,1513232980.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:40.819Z,1513232980.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:41.111Z,1513232981.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:41.126Z,1513232981.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:41.544Z,1513232981.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:41.571Z,1513232981.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:41.901Z,1513232981.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:41.928Z,1513232981.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:42.324Z,1513232982.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:42.340Z,1513232982.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:42.725Z,1513232982.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:42.740Z,1513232982.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:43.125Z,1513232983.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:43.140Z,1513232983.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:43.516Z,1513232983.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:43.531Z,1513232983.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:43.914Z,1513232983.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:43.928Z,1513232983.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:44.306Z,1513232984.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:44.336Z,1513232984.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:44.737Z,1513232984.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:44.794Z,1513232984.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:45.124Z,1513232985.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:45.176Z,1513232985.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:45.525Z,1513232985.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:45.540Z,1513232985.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:45.932Z,1513232985.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:45.947Z,1513232985.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:46.327Z,1513232986.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:46.347Z,1513232986.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:46.703Z,1513232986.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:46.730Z,1513232986.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:47.103Z,1513232987.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:47.135Z,1513232987.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:47.503Z,1513232987.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:47.589Z,1513232987.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:47.921Z,1513232987.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:47.959Z,1513232987.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:48.313Z,1513232988.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:48.348Z,1513232988.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:48.728Z,1513232988.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:48.748Z,1513232988.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:49.114Z,1513232989.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:49.155Z,1513232989.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:49.506Z,1513232989.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:49.520Z,1513232989.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:49.904Z,1513232989.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:49.943Z,1513232989.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:50.322Z,1513232990.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:50.375Z,1513232990.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:50.721Z,1513232990.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:50.749Z,1513232990.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:51.146Z,1513232991.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:51.178Z,1513232991.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:51.510Z,1513232991.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:51.525Z,1513232991.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:51.911Z,1513232991.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:51.929Z,1513232991.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:52.310Z,1513232992.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:52.338Z,1513232992.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:52.713Z,1513232992.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:52.758Z,1513232992.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:53.111Z,1513232993.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:53.131Z,1513232993.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:53.526Z,1513232993.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:53.560Z,1513232993.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:53.926Z,1513232993.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:53.961Z,1513232993.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:54.341Z,1513232994.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:54.386Z,1513232994.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:54.712Z,1513232994.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:54.727Z,1513232994.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:55.121Z,1513232995.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:55.136Z,1513232995.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:55.518Z,1513232995.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:55.533Z,1513232995.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:55.911Z,1513232995.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:55.927Z,1513232995.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:56.320Z,1513232996.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:56.340Z,1513232996.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:56.724Z,1513232996.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:56.743Z,1513232996.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:57.122Z,1513232997.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:57.139Z,1513232997.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:57.530Z,1513232997.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:57.550Z,1513232997.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:57.903Z,1513232997.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:57.946Z,1513232997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:58.313Z,1513232998.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:58.353Z,1513232998.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:58.717Z,1513232998.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:58.748Z,1513232998.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:59.113Z,1513232999.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:59.146Z,1513232999.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:59.504Z,1513232999.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:59.539Z,1513232999.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:29:59.907Z,1513232999.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:29:59.943Z,1513232999.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:00.314Z,1513233000.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:00.322Z,1513233000.322 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:30:00.322Z,1513233000.322 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:30:00.322Z,1513233000.322 [BPC1](ERROR): Communications Fault
2017-12-14T06:30:00.362Z,1513233000.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:00.376Z,1513233000.376 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:30:00.743Z,1513233000.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:00.763Z,1513233000.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:01.126Z,1513233001.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:01.158Z,1513233001.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:01.507Z,1513233001.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:01.530Z,1513233001.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:01.561Z,1513233001.561 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:30:01.561Z,1513233001.561 [BPC1] No Fault, FailCount= 1
2017-12-14T06:30:01.913Z,1513233001.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:01.979Z,1513233001.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:02.316Z,1513233002.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:02.331Z,1513233002.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:02.713Z,1513233002.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:02.735Z,1513233002.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:03.112Z,1513233003.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:03.127Z,1513233003.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:03.516Z,1513233003.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:03.536Z,1513233003.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:03.931Z,1513233003.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:03.986Z,1513233003.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:04.330Z,1513233004.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:04.362Z,1513233004.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:04.725Z,1513233004.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:04.762Z,1513233004.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:05.109Z,1513233005.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:05.136Z,1513233005.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:05.519Z,1513233005.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:05.534Z,1513233005.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:05.916Z,1513233005.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:05.931Z,1513233005.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:06.321Z,1513233006.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:06.335Z,1513233006.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:06.722Z,1513233006.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:06.737Z,1513233006.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:07.172Z,1513233007.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:07.224Z,1513233007.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:07.526Z,1513233007.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:07.541Z,1513233007.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:07.904Z,1513233007.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:07.946Z,1513233007.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:08.316Z,1513233008.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:08.332Z,1513233008.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:08.704Z,1513233008.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:08.728Z,1513233008.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:09.104Z,1513233009.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:09.130Z,1513233009.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:09.528Z,1513233009.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:09.543Z,1513233009.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:09.927Z,1513233009.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:09.941Z,1513233009.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:10.344Z,1513233010.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:10.419Z,1513233010.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:10.703Z,1513233010.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:10.736Z,1513233010.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:11.102Z,1513233011.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:11.139Z,1513233011.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:11.503Z,1513233011.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:11.534Z,1513233011.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:11.907Z,1513233011.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:11.944Z,1513233011.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:12.314Z,1513233012.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:12.382Z,1513233012.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:12.728Z,1513233012.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:12.743Z,1513233012.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:13.114Z,1513233013.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:13.151Z,1513233013.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:13.506Z,1513233013.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:13.547Z,1513233013.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:13.912Z,1513233013.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:13.926Z,1513233013.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:14.318Z,1513233014.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:14.332Z,1513233014.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:14.720Z,1513233014.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:14.739Z,1513233014.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:15.120Z,1513233015.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:15.136Z,1513233015.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:15.515Z,1513233015.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:15.530Z,1513233015.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:15.911Z,1513233015.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:15.925Z,1513233015.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:16.322Z,1513233016.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:16.336Z,1513233016.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:16.748Z,1513233016.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:16.778Z,1513233016.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:17.127Z,1513233017.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:17.147Z,1513233017.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:17.515Z,1513233017.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:17.530Z,1513233017.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:17.906Z,1513233017.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:17.947Z,1513233017.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:18.320Z,1513233018.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:18.339Z,1513233018.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:18.727Z,1513233018.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:18.750Z,1513233018.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:19.108Z,1513233019.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:19.135Z,1513233019.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:19.518Z,1513233019.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:19.551Z,1513233019.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:23.004Z,1513233023.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:23.147Z,1513233023.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:23.284Z,1513233023.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:23.303Z,1513233023.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:23.635Z,1513233023.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:23.691Z,1513233023.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:24.037Z,1513233024.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:24.070Z,1513233024.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:24.439Z,1513233024.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:24.487Z,1513233024.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:24.844Z,1513233024.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:24.868Z,1513233024.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:25.239Z,1513233025.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:25.273Z,1513233025.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:25.634Z,1513233025.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:25.648Z,1513233025.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:26.063Z,1513233026.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:26.079Z,1513233026.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:26.466Z,1513233026.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:26.493Z,1513233026.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:26.836Z,1513233026.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:26.850Z,1513233026.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:26.872Z,1513233026.872 [CBIT](IMPORTANT): Beginning ground fault scan
2017-12-14T06:30:27.231Z,1513233027.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:27.253Z,1513233027.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:27.642Z,1513233027.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:27.656Z,1513233027.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:28.035Z,1513233028.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:28.050Z,1513233028.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:28.441Z,1513233028.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:28.456Z,1513233028.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:28.846Z,1513233028.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:28.867Z,1513233028.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:29.246Z,1513233029.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:29.260Z,1513233029.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:29.662Z,1513233029.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:29.736Z,1513233029.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:30.037Z,1513233030.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:30.052Z,1513233030.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:30.439Z,1513233030.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:30.454Z,1513233030.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:30.841Z,1513233030.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:30.863Z,1513233030.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:31.239Z,1513233031.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:31.254Z,1513233031.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:31.646Z,1513233031.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:31.660Z,1513233031.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:32.046Z,1513233032.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:32.060Z,1513233032.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:32.446Z,1513233032.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:32.461Z,1513233032.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:32.853Z,1513233032.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:32.911Z,1513233032.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:33.233Z,1513233033.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:33.259Z,1513233033.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:33.641Z,1513233033.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:33.656Z,1513233033.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:34.038Z,1513233034.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:34.059Z,1513233034.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:34.449Z,1513233034.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:34.467Z,1513233034.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:34.849Z,1513233034.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:34.864Z,1513233034.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:35.241Z,1513233035.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:35.271Z,1513233035.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:35.631Z,1513233035.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:35.668Z,1513233035.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:36.072Z,1513233036.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:36.108Z,1513233036.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:36.431Z,1513233036.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:36.467Z,1513233036.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:36.828Z,1513233036.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:36.842Z,1513233036.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:37.240Z,1513233037.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:37.267Z,1513233037.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:37.642Z,1513233037.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:37.657Z,1513233037.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:37.699Z,1513233037.699 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133174
CHAN A1 (24V): 0.128799
CHAN A2 (12V): 0.000148
CHAN A3 (5V): -0.002121
CHAN B0 (3.3V): -0.000769
CHAN B1 (3.15aV): -0.000199
CHAN B2 (3.15bV): -0.001129
CHAN B3 (GND): -0.002245
OPEN: 0.003482
Full Scale Calc: 4.765 mA, -1.589 mA
2017-12-14T06:30:38.041Z,1513233038.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:38.055Z,1513233038.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:38.441Z,1513233038.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:38.456Z,1513233038.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:38.836Z,1513233038.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:38.859Z,1513233038.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:39.262Z,1513233039.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:39.298Z,1513233039.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:39.636Z,1513233039.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:39.663Z,1513233039.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:40.032Z,1513233040.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:40.047Z,1513233040.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:40.445Z,1513233040.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:40.475Z,1513233040.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:40.862Z,1513233040.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:40.876Z,1513233040.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:41.238Z,1513233041.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:41.273Z,1513233041.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:41.632Z,1513233041.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:41.647Z,1513233041.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:42.038Z,1513233042.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:42.066Z,1513233042.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:42.432Z,1513233042.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:42.447Z,1513233042.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:42.834Z,1513233042.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:42.855Z,1513233042.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:43.237Z,1513233043.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:43.252Z,1513233043.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:43.647Z,1513233043.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:43.722Z,1513233043.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:44.049Z,1513233044.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:44.064Z,1513233044.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:44.442Z,1513233044.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:44.489Z,1513233044.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:44.845Z,1513233044.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:44.860Z,1513233044.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:45.241Z,1513233045.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:45.291Z,1513233045.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:45.641Z,1513233045.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:45.656Z,1513233045.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:46.034Z,1513233046.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:46.052Z,1513233046.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:46.444Z,1513233046.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:46.463Z,1513233046.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:46.845Z,1513233046.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:46.860Z,1513233046.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:47.245Z,1513233047.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:47.260Z,1513233047.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:47.642Z,1513233047.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:47.656Z,1513233047.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:48.041Z,1513233048.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:48.056Z,1513233048.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:48.438Z,1513233048.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:48.454Z,1513233048.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:48.885Z,1513233048.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:48.955Z,1513233048.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:49.244Z,1513233049.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:49.267Z,1513233049.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:49.645Z,1513233049.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:49.671Z,1513233049.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:50.049Z,1513233050.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:50.068Z,1513233050.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:50.450Z,1513233050.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:50.476Z,1513233050.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:50.828Z,1513233050.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:50.847Z,1513233050.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:51.226Z,1513233051.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:51.262Z,1513233051.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:51.643Z,1513233051.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:51.663Z,1513233051.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:52.043Z,1513233052.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:52.058Z,1513233052.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:52.457Z,1513233052.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:52.472Z,1513233052.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:52.853Z,1513233052.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:52.867Z,1513233052.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:53.250Z,1513233053.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:53.265Z,1513233053.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:53.642Z,1513233053.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:53.681Z,1513233053.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:54.025Z,1513233054.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:54.059Z,1513233054.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:54.445Z,1513233054.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:54.460Z,1513233054.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:54.843Z,1513233054.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:54.863Z,1513233054.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:55.278Z,1513233055.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:55.313Z,1513233055.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:55.647Z,1513233055.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:55.661Z,1513233055.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:56.049Z,1513233056.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:56.071Z,1513233056.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:56.456Z,1513233056.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:56.471Z,1513233056.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:56.832Z,1513233056.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:56.859Z,1513233056.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:57.226Z,1513233057.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:57.251Z,1513233057.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:57.632Z,1513233057.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:57.666Z,1513233057.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:58.031Z,1513233058.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:58.063Z,1513233058.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:58.455Z,1513233058.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:58.487Z,1513233058.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:58.841Z,1513233058.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:58.869Z,1513233058.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:59.238Z,1513233059.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:59.276Z,1513233059.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:30:59.633Z,1513233059.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:30:59.668Z,1513233059.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:00.033Z,1513233060.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:00.072Z,1513233060.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:00.432Z,1513233060.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:00.462Z,1513233060.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:00.827Z,1513233060.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:00.863Z,1513233060.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:01.240Z,1513233061.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:01.271Z,1513233061.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:01.647Z,1513233061.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:01.675Z,1513233061.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:02.043Z,1513233062.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:02.070Z,1513233062.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:02.446Z,1513233062.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:02.471Z,1513233062.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:02.837Z,1513233062.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:02.865Z,1513233062.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:03.239Z,1513233063.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:03.255Z,1513233063.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:03.638Z,1513233063.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:03.652Z,1513233063.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:04.030Z,1513233064.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:04.062Z,1513233064.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:04.447Z,1513233064.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:04.532Z,1513233064.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:04.849Z,1513233064.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:04.884Z,1513233064.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:05.245Z,1513233065.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:05.292Z,1513233065.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:05.292Z,1513233065.292 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2017-12-14T06:31:05.292Z,1513233065.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:31:05.294Z,1513233065.294 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:05.294Z,1513233065.294 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120
2017-12-14T06:31:05.294Z,1513233065.294 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:31:05.296Z,1513233065.296 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:05.296Z,1513233065.296 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2017-12-14T06:31:05.296Z,1513233065.296 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:31:05.308Z,1513233065.308 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:31:05.309Z,1513233065.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:31:05.309Z,1513233065.309 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:31:05.648Z,1513233065.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:05.672Z,1513233065.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:31:05.672Z,1513233065.672 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2017-12-14T06:31:05.689Z,1513233065.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:31:05.689Z,1513233065.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120
2017-12-14T06:31:05.689Z,1513233065.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:31:05.689Z,1513233065.689 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2017-12-14T06:31:06.038Z,1513233066.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:06.074Z,1513233066.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:31:06.075Z,1513233066.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:31:06.075Z,1513233066.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:31:06.075Z,1513233066.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:31:06.076Z,1513233066.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:31:06.076Z,1513233066.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:31:06.076Z,1513233066.076 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:31:06.082Z,1513233066.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:31:06.082Z,1513233066.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:31:06.431Z,1513233066.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:06.465Z,1513233066.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:06.827Z,1513233066.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:06.859Z,1513233066.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:07.230Z,1513233067.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:07.263Z,1513233067.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:07.650Z,1513233067.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:07.665Z,1513233067.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:08.061Z,1513233068.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:08.075Z,1513233068.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:08.438Z,1513233068.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:08.475Z,1513233068.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:08.827Z,1513233068.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:08.867Z,1513233068.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:09.234Z,1513233069.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:09.257Z,1513233069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:09.634Z,1513233069.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:09.648Z,1513233069.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:10.034Z,1513233070.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:10.049Z,1513233070.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:10.450Z,1513233070.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:10.475Z,1513233070.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:10.843Z,1513233070.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:10.876Z,1513233070.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:11.253Z,1513233071.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:11.299Z,1513233071.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:11.634Z,1513233071.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:11.655Z,1513233071.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:12.036Z,1513233072.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:12.055Z,1513233072.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:12.439Z,1513233072.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:12.459Z,1513233072.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:12.836Z,1513233072.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:12.851Z,1513233072.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:13.233Z,1513233073.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:13.249Z,1513233073.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:13.638Z,1513233073.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:13.652Z,1513233073.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:14.053Z,1513233074.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:14.104Z,1513233074.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:14.459Z,1513233074.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:14.489Z,1513233074.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:14.851Z,1513233074.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:14.880Z,1513233074.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:15.232Z,1513233075.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:15.255Z,1513233075.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:15.640Z,1513233075.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:15.660Z,1513233075.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:16.042Z,1513233076.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:16.063Z,1513233076.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:16.475Z,1513233076.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:16.516Z,1513233076.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:16.843Z,1513233076.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:16.858Z,1513233076.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:17.253Z,1513233077.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:17.268Z,1513233077.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:17.643Z,1513233077.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:17.744Z,1513233077.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:18.028Z,1513233078.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:18.092Z,1513233078.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:18.428Z,1513233078.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:18.462Z,1513233078.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:18.834Z,1513233078.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:18.872Z,1513233078.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:19.240Z,1513233079.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:19.288Z,1513233079.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:19.660Z,1513233079.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:19.699Z,1513233079.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:26.092Z,1513233086.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:26.168Z,1513233086.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:26.300Z,1513233086.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:26.345Z,1513233086.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:26.690Z,1513233086.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:26.706Z,1513233086.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:27.088Z,1513233087.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:27.148Z,1513233087.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:27.448Z,1513233087.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:27.463Z,1513233087.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:27.850Z,1513233087.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:27.944Z,1513233087.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:28.250Z,1513233088.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:28.264Z,1513233088.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:28.691Z,1513233088.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:28.742Z,1513233088.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:29.073Z,1513233089.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:29.087Z,1513233089.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:29.478Z,1513233089.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:29.502Z,1513233089.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:29.849Z,1513233089.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:29.880Z,1513233089.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:30.251Z,1513233090.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:30.308Z,1513233090.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:30.648Z,1513233090.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:30.702Z,1513233090.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:31.067Z,1513233091.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:31.128Z,1513233091.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:31.460Z,1513233091.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:31.480Z,1513233091.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:31.863Z,1513233091.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:31.916Z,1513233091.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:32.259Z,1513233092.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:32.284Z,1513233092.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:32.640Z,1513233092.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:32.681Z,1513233092.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:33.040Z,1513233093.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:33.087Z,1513233093.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:33.442Z,1513233093.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:33.482Z,1513233093.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:33.865Z,1513233093.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:33.912Z,1513233093.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:34.244Z,1513233094.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:34.396Z,1513233094.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:34.664Z,1513233094.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:34.706Z,1513233094.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:35.067Z,1513233095.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:35.108Z,1513233095.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:35.459Z,1513233095.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:35.504Z,1513233095.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:35.849Z,1513233095.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:35.893Z,1513233095.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:36.248Z,1513233096.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:36.315Z,1513233096.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:36.662Z,1513233096.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:36.715Z,1513233096.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:37.048Z,1513233097.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:37.081Z,1513233097.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:37.459Z,1513233097.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:37.483Z,1513233097.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:37.865Z,1513233097.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:37.895Z,1513233097.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:38.261Z,1513233098.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:38.280Z,1513233098.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:38.687Z,1513233098.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:38.730Z,1513233098.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:39.040Z,1513233099.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:39.104Z,1513233099.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:39.441Z,1513233099.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:39.488Z,1513233099.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:39.841Z,1513233099.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:39.913Z,1513233099.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:40.240Z,1513233100.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:40.291Z,1513233100.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:40.673Z,1513233100.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:40.719Z,1513233100.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:41.098Z,1513233101.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:41.135Z,1513233101.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:41.458Z,1513233101.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:41.491Z,1513233101.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:41.836Z,1513233101.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:41.863Z,1513233101.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:42.244Z,1513233102.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:42.259Z,1513233102.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:42.704Z,1513233102.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:42.752Z,1513233102.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:43.052Z,1513233103.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:43.071Z,1513233103.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:43.457Z,1513233103.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:43.475Z,1513233103.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:43.858Z,1513233103.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:43.875Z,1513233103.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:44.255Z,1513233104.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:44.277Z,1513233104.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:44.651Z,1513233104.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:44.666Z,1513233104.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:45.050Z,1513233105.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:45.102Z,1513233105.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:45.452Z,1513233105.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:45.466Z,1513233105.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:45.851Z,1513233105.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:45.866Z,1513233105.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:46.247Z,1513233106.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:46.264Z,1513233106.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:46.656Z,1513233106.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:46.722Z,1513233106.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:47.060Z,1513233107.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:47.126Z,1513233107.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:47.460Z,1513233107.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:47.476Z,1513233107.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:47.843Z,1513233107.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:47.909Z,1513233107.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:48.243Z,1513233108.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:48.269Z,1513233108.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:48.675Z,1513233108.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:48.731Z,1513233108.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:49.043Z,1513233109.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:49.076Z,1513233109.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:49.454Z,1513233109.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:49.476Z,1513233109.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:49.864Z,1513233109.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:49.879Z,1513233109.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:50.254Z,1513233110.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:50.283Z,1513233110.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:50.649Z,1513233110.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:50.672Z,1513233110.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:51.047Z,1513233111.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:51.063Z,1513233111.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:51.447Z,1513233111.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:51.468Z,1513233111.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:51.850Z,1513233111.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:51.864Z,1513233111.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:52.246Z,1513233112.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:52.267Z,1513233112.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:52.683Z,1513233112.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:52.700Z,1513233112.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:53.065Z,1513233113.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:53.094Z,1513233113.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:53.451Z,1513233113.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:53.511Z,1513233113.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:53.842Z,1513233113.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:53.864Z,1513233113.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:54.246Z,1513233114.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:54.271Z,1513233114.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:54.664Z,1513233114.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:54.710Z,1513233114.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:55.040Z,1513233115.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:55.067Z,1513233115.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:55.464Z,1513233115.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:55.479Z,1513233115.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:55.869Z,1513233115.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:55.884Z,1513233115.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:56.261Z,1513233116.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:56.283Z,1513233116.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:56.713Z,1513233116.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:56.776Z,1513233116.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:57.039Z,1513233117.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:57.075Z,1513233117.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:57.440Z,1513233117.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:57.471Z,1513233117.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:57.839Z,1513233117.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:57.855Z,1513233117.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:58.240Z,1513233118.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:58.255Z,1513233118.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:58.658Z,1513233118.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:58.684Z,1513233118.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:59.081Z,1513233119.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:59.101Z,1513233119.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:59.377Z,1513233119.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:59.470Z,1513233119.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:59.485Z,1513233119.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:31:59.840Z,1513233119.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:31:59.855Z,1513233119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:00.173Z,1513233120.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:00.247Z,1513233120.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:00.283Z,1513233120.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:00.648Z,1513233120.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:00.663Z,1513233120.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:01.050Z,1513233121.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:01.065Z,1513233121.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:01.454Z,1513233121.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:01.491Z,1513233121.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:01.894Z,1513233121.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:01.915Z,1513233121.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:02.254Z,1513233122.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:02.269Z,1513233122.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:02.650Z,1513233122.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:02.695Z,1513233122.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:03.083Z,1513233123.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:03.111Z,1513233123.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:03.439Z,1513233123.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:03.463Z,1513233123.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:03.860Z,1513233123.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:03.875Z,1513233123.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:04.240Z,1513233124.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:04.274Z,1513233124.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:04.668Z,1513233124.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:04.686Z,1513233124.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:05.059Z,1513233125.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:05.090Z,1513233125.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:05.471Z,1513233125.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:05.491Z,1513233125.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:05.839Z,1513233125.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:05.870Z,1513233125.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:06.242Z,1513233126.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:06.294Z,1513233126.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:06.655Z,1513233126.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:06.688Z,1513233126.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:07.049Z,1513233127.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:07.103Z,1513233127.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:07.462Z,1513233127.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:07.490Z,1513233127.490 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T06:32:07.490Z,1513233127.490 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:32:07.490Z,1513233127.490 [BPC1](ERROR): Data Fault
2017-12-14T06:32:07.498Z,1513233127.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:07.511Z,1513233127.511 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:32:07.854Z,1513233127.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:07.868Z,1513233127.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:08.254Z,1513233128.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:08.275Z,1513233128.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:08.667Z,1513233128.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:08.701Z,1513233128.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:08.714Z,1513233128.714 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:32:08.714Z,1513233128.714 [BPC1] No Fault, FailCount= 1
2017-12-14T06:32:09.049Z,1513233129.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:09.115Z,1513233129.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:09.469Z,1513233129.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:09.509Z,1513233129.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:09.895Z,1513233129.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:09.910Z,1513233129.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:10.236Z,1513233130.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:10.261Z,1513233130.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:10.679Z,1513233130.679 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T06:32:10.679Z,1513233130.679 [NAL9602] Data Fault, FailCount= 3
2017-12-14T06:32:10.679Z,1513233130.679 [NAL9602](ERROR): Data Fault
2017-12-14T06:32:10.723Z,1513233130.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:10.764Z,1513233130.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:10.782Z,1513233130.782 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T06:32:11.030Z,1513233131.030 [NAL9602](INFO): Powering down
2017-12-14T06:32:11.062Z,1513233131.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:11.076Z,1513233131.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:11.446Z,1513233131.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:11.469Z,1513233131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:11.850Z,1513233131.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:11.866Z,1513233131.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:11.879Z,1513233131.879 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:32:11.879Z,1513233131.879 [NAL9602] No Fault, FailCount= 3
2017-12-14T06:32:12.246Z,1513233132.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:12.263Z,1513233132.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:12.671Z,1513233132.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:12.734Z,1513233132.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:13.045Z,1513233133.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:13.067Z,1513233133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:13.452Z,1513233133.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:13.467Z,1513233133.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:13.835Z,1513233133.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:13.870Z,1513233133.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:14.263Z,1513233134.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:14.306Z,1513233134.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:14.646Z,1513233134.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:14.663Z,1513233134.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:15.047Z,1513233135.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:15.062Z,1513233135.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:15.445Z,1513233135.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:15.467Z,1513233135.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:15.868Z,1513233135.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:15.910Z,1513233135.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:16.238Z,1513233136.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:16.252Z,1513233136.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:16.663Z,1513233136.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:16.683Z,1513233136.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:17.066Z,1513233137.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:17.081Z,1513233137.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:17.439Z,1513233137.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:17.487Z,1513233137.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:17.842Z,1513233137.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:17.881Z,1513233137.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:18.238Z,1513233138.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:18.259Z,1513233138.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:18.663Z,1513233138.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:18.687Z,1513233138.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:19.078Z,1513233139.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:19.119Z,1513233139.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:19.438Z,1513233139.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:19.474Z,1513233139.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:19.844Z,1513233139.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:19.875Z,1513233139.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:23.384Z,1513233143.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:23.480Z,1513233143.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:23.567Z,1513233143.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:23.620Z,1513233143.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:23.946Z,1513233143.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:24.011Z,1513233144.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:24.347Z,1513233144.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:24.374Z,1513233144.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:24.748Z,1513233144.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:24.810Z,1513233144.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:25.147Z,1513233145.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:25.183Z,1513233145.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:25.547Z,1513233145.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:25.574Z,1513233145.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:25.947Z,1513233145.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:25.971Z,1513233145.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:26.347Z,1513233146.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:26.371Z,1513233146.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:26.744Z,1513233146.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:26.767Z,1513233146.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:27.148Z,1513233147.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:27.189Z,1513233147.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:27.552Z,1513233147.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:27.577Z,1513233147.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:27.944Z,1513233147.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:27.968Z,1513233147.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:28.347Z,1513233148.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:28.382Z,1513233148.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:28.799Z,1513233148.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:28.888Z,1513233148.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:29.153Z,1513233149.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:29.191Z,1513233149.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:29.552Z,1513233149.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:29.567Z,1513233149.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:29.956Z,1513233149.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:29.970Z,1513233149.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:30.353Z,1513233150.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:30.369Z,1513233150.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:30.754Z,1513233150.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:30.768Z,1513233150.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:31.149Z,1513233151.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:31.183Z,1513233151.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:31.559Z,1513233151.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:31.574Z,1513233151.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:31.956Z,1513233151.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:31.971Z,1513233151.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:32.360Z,1513233152.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:32.374Z,1513233152.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:32.755Z,1513233152.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:32.769Z,1513233152.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:33.150Z,1513233153.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:33.204Z,1513233153.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:33.560Z,1513233153.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:33.575Z,1513233153.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:33.960Z,1513233153.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:33.975Z,1513233153.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:34.355Z,1513233154.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:34.375Z,1513233154.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:34.769Z,1513233154.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:34.807Z,1513233154.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:35.147Z,1513233155.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:35.190Z,1513233155.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:35.551Z,1513233155.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:35.576Z,1513233155.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:35.947Z,1513233155.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:35.983Z,1513233155.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:36.349Z,1513233156.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:36.380Z,1513233156.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:36.753Z,1513233156.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:36.768Z,1513233156.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:37.154Z,1513233157.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:37.169Z,1513233157.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:37.557Z,1513233157.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:37.572Z,1513233157.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:38.003Z,1513233158.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:38.058Z,1513233158.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:38.353Z,1513233158.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:38.398Z,1513233158.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:38.752Z,1513233158.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:38.768Z,1513233158.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:39.150Z,1513233159.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:39.171Z,1513233159.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:39.555Z,1513233159.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:39.570Z,1513233159.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:39.954Z,1513233159.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:39.969Z,1513233159.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:40.364Z,1513233160.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:40.378Z,1513233160.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:40.761Z,1513233160.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:40.779Z,1513233160.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:41.167Z,1513233161.167 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:32:41.190Z,1513233161.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:41.235Z,1513233161.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:41.556Z,1513233161.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:41.591Z,1513233161.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:41.960Z,1513233161.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:41.975Z,1513233161.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:42.358Z,1513233162.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:42.379Z,1513233162.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:42.755Z,1513233162.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:42.774Z,1513233162.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:43.153Z,1513233163.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:43.191Z,1513233163.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:43.559Z,1513233163.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:43.575Z,1513233163.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:43.947Z,1513233163.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:43.983Z,1513233163.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:44.370Z,1513233164.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:44.430Z,1513233164.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:44.748Z,1513233164.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:44.853Z,1513233164.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:45.152Z,1513233165.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:45.210Z,1513233165.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:45.555Z,1513233165.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:45.615Z,1513233165.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:45.951Z,1513233165.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:45.966Z,1513233165.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:46.355Z,1513233166.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:46.370Z,1513233166.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:46.755Z,1513233166.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:46.819Z,1513233166.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:47.154Z,1513233167.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:47.169Z,1513233167.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:47.614Z,1513233167.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:47.675Z,1513233167.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:47.956Z,1513233167.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:48.007Z,1513233168.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:48.358Z,1513233168.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:48.372Z,1513233168.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:48.754Z,1513233168.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:48.770Z,1513233168.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:49.157Z,1513233169.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:49.173Z,1513233169.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:49.555Z,1513233169.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:49.570Z,1513233169.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:50.002Z,1513233170.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:50.086Z,1513233170.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:50.346Z,1513233170.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:50.371Z,1513233170.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:50.784Z,1513233170.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:50.824Z,1513233170.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:51.156Z,1513233171.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:51.190Z,1513233171.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:51.558Z,1513233171.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:51.572Z,1513233171.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:51.967Z,1513233171.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:51.982Z,1513233171.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:52.330Z,1513233172.330 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:32:52.351Z,1513233172.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:52.396Z,1513233172.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:52.747Z,1513233172.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:52.781Z,1513233172.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:53.174Z,1513233173.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:53.188Z,1513233173.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:53.571Z,1513233173.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:53.586Z,1513233173.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:53.991Z,1513233173.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:54.044Z,1513233174.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:54.347Z,1513233174.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:54.385Z,1513233174.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:54.748Z,1513233174.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:54.784Z,1513233174.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:55.163Z,1513233175.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:55.188Z,1513233175.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:55.573Z,1513233175.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:55.595Z,1513233175.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:55.981Z,1513233175.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:56.042Z,1513233176.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:56.173Z,1513233176.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:56.373Z,1513233176.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:56.410Z,1513233176.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:56.748Z,1513233176.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:56.764Z,1513233176.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:56.972Z,1513233176.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:57.184Z,1513233177.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:57.237Z,1513233177.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:57.377Z,1513233177.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:57.552Z,1513233177.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:57.590Z,1513233177.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:57.956Z,1513233177.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:57.987Z,1513233177.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:58.355Z,1513233178.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:58.370Z,1513233178.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:58.759Z,1513233178.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:58.804Z,1513233178.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:59.166Z,1513233179.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:59.199Z,1513233179.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:59.569Z,1513233179.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:59.600Z,1513233179.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:32:59.953Z,1513233179.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:32:59.967Z,1513233179.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:00.357Z,1513233180.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:00.418Z,1513233180.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:00.756Z,1513233180.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:00.771Z,1513233180.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:01.152Z,1513233181.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:01.182Z,1513233181.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:01.570Z,1513233181.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:01.606Z,1513233181.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:01.963Z,1513233181.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:01.983Z,1513233181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:02.365Z,1513233182.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:02.390Z,1513233182.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:02.757Z,1513233182.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:02.772Z,1513233182.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:03.151Z,1513233183.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:03.174Z,1513233183.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:03.596Z,1513233183.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:03.643Z,1513233183.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:03.957Z,1513233183.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:03.992Z,1513233183.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:04.360Z,1513233184.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:04.375Z,1513233184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:04.780Z,1513233184.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:04.796Z,1513233184.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:05.164Z,1513233185.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:05.196Z,1513233185.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:05.567Z,1513233185.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:05.590Z,1513233185.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:05.959Z,1513233185.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:05.973Z,1513233185.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:06.357Z,1513233186.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:06.384Z,1513233186.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:06.770Z,1513233186.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:06.800Z,1513233186.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:07.147Z,1513233187.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:07.190Z,1513233187.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:07.570Z,1513233187.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:07.634Z,1513233187.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:07.973Z,1513233187.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:08.050Z,1513233188.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:08.373Z,1513233188.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:08.392Z,1513233188.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:08.750Z,1513233188.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:08.807Z,1513233188.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:09.160Z,1513233189.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:09.186Z,1513233189.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:09.553Z,1513233189.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:09.597Z,1513233189.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:09.975Z,1513233189.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:10.010Z,1513233190.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:10.178Z,1513233190.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:10.352Z,1513233190.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:10.372Z,1513233190.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:10.765Z,1513233190.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:10.799Z,1513233190.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:10.974Z,1513233190.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:11.186Z,1513233191.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:11.208Z,1513233191.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:11.377Z,1513233191.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:11.566Z,1513233191.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:11.599Z,1513233191.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:11.952Z,1513233191.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:11.966Z,1513233191.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:12.354Z,1513233192.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:12.375Z,1513233192.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:12.756Z,1513233192.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:12.770Z,1513233192.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:13.172Z,1513233193.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:13.217Z,1513233193.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:13.566Z,1513233193.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:13.592Z,1513233193.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:13.968Z,1513233193.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:13.984Z,1513233193.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:14.366Z,1513233194.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:14.387Z,1513233194.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:14.747Z,1513233194.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:14.775Z,1513233194.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:15.160Z,1513233195.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:15.177Z,1513233195.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:15.561Z,1513233195.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:15.575Z,1513233195.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:15.962Z,1513233195.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:15.977Z,1513233195.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:16.407Z,1513233196.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:16.426Z,1513233196.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:16.766Z,1513233196.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:16.792Z,1513233196.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:17.166Z,1513233197.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:17.185Z,1513233197.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:17.571Z,1513233197.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:17.586Z,1513233197.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:17.952Z,1513233197.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:18.004Z,1513233198.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:18.349Z,1513233198.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:18.386Z,1513233198.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:18.748Z,1513233198.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:18.774Z,1513233198.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:19.163Z,1513233199.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:19.178Z,1513233199.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:19.182Z,1513233199.182 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T06:28:18.8Z
2017-12-14T06:33:19.182Z,1513233199.182 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:33:19.182Z,1513233199.182 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:33:19.628Z,1513233199.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:19.676Z,1513233199.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:20.430Z,1513233200.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:20.446Z,1513233200.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:23.657Z,1513233203.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:23.673Z,1513233203.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:23.761Z,1513233203.761 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0140.lzma
2017-12-14T06:33:23.795Z,1513233203.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:23.827Z,1513233203.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:24.156Z,1513233204.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:24.171Z,1513233204.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:24.202Z,1513233204.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:24.527Z,1513233204.527 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0140.lzma.bak
2017-12-14T06:33:24.527Z,1513233204.527 [DataOverHttps](INFO): SBD MOMSN=5438102
2017-12-14T06:33:24.565Z,1513233204.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:24.580Z,1513233204.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:24.998Z,1513233204.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:25.405Z,1513233205.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:25.794Z,1513233205.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:25.809Z,1513233205.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:25.932Z,1513233205.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:25.972Z,1513233205.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:29.463Z,1513233209.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:29.479Z,1513233209.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:29.588Z,1513233209.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:29.613Z,1513233209.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:29.966Z,1513233209.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:30.051Z,1513233210.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:30.363Z,1513233210.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:30.377Z,1513233210.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:30.764Z,1513233210.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:30.860Z,1513233210.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:31.155Z,1513233211.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:31.190Z,1513233211.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:34.772Z,1513233214.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:34.849Z,1513233214.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:34.928Z,1513233214.928 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20171214T002839/Express0141.lzma
2017-12-14T06:33:34.974Z,1513233214.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:34.991Z,1513233214.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:35.361Z,1513233215.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:35.375Z,1513233215.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:35.771Z,1513233215.771 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0141.lzma.bak
2017-12-14T06:33:35.772Z,1513233215.772 [DataOverHttps](INFO): SBD MOMSN=5438106
2017-12-14T06:33:35.795Z,1513233215.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:35.832Z,1513233215.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:56.660Z,1513233236.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:56.722Z,1513233236.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:33:56.725Z,1513233236.725 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:33:56.725Z,1513233236.725 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:33:56.725Z,1513233236.725 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:33:56.828Z,1513233236.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:33:56.848Z,1513233236.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:01.102Z,1513233241.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:01.117Z,1513233241.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:01.236Z,1513233241.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:01.250Z,1513233241.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:01.626Z,1513233241.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:01.647Z,1513233241.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:02.003Z,1513233242.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:02.039Z,1513233242.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:02.404Z,1513233242.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:02.419Z,1513233242.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:02.807Z,1513233242.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:02.823Z,1513233242.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:03.208Z,1513233243.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:03.243Z,1513233243.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:03.619Z,1513233243.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:03.641Z,1513233243.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:04.011Z,1513233244.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:04.042Z,1513233244.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:04.407Z,1513233244.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:04.423Z,1513233244.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:04.806Z,1513233244.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:04.822Z,1513233244.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:05.199Z,1513233245.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:05.250Z,1513233245.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:05.607Z,1513233245.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:05.614Z,1513233245.614 [PNI_TCM](ERROR): CRC does not match. Expected:0x53630 got:0x55047
2017-12-14T06:34:05.653Z,1513233245.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:06.008Z,1513233246.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:06.024Z,1513233246.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:06.409Z,1513233246.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:06.424Z,1513233246.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:06.425Z,1513233246.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2017-12-14T06:34:06.425Z,1513233246.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:34:06.427Z,1513233246.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:06.427Z,1513233246.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121
2017-12-14T06:34:06.427Z,1513233246.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:34:06.429Z,1513233246.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:06.429Z,1513233246.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2017-12-14T06:34:06.429Z,1513233246.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:34:06.461Z,1513233246.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:34:06.461Z,1513233246.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:34:06.461Z,1513233246.461 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:34:06.816Z,1513233246.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:06.859Z,1513233246.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:34:06.859Z,1513233246.859 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2017-12-14T06:34:06.859Z,1513233246.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:34:06.859Z,1513233246.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121
2017-12-14T06:34:06.860Z,1513233246.860 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:34:06.860Z,1513233246.860 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2017-12-14T06:34:07.218Z,1513233247.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:07.250Z,1513233247.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:34:07.251Z,1513233247.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:34:07.251Z,1513233247.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:34:07.251Z,1513233247.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:34:07.252Z,1513233247.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:34:07.252Z,1513233247.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:34:07.257Z,1513233247.257 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:34:07.257Z,1513233247.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:34:07.258Z,1513233247.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:34:07.605Z,1513233247.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:07.630Z,1513233247.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:07.999Z,1513233247.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:08.031Z,1513233248.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:08.391Z,1513233248.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:08.466Z,1513233248.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:08.806Z,1513233248.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:08.852Z,1513233248.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:09.210Z,1513233249.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:09.235Z,1513233249.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:09.623Z,1513233249.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:09.677Z,1513233249.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:10.023Z,1513233250.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:10.038Z,1513233250.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:10.406Z,1513233250.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:10.451Z,1513233250.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:10.810Z,1513233250.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:10.851Z,1513233250.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:11.201Z,1513233251.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:11.224Z,1513233251.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:11.604Z,1513233251.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:11.626Z,1513233251.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:11.999Z,1513233251.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:12.021Z,1513233252.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:12.410Z,1513233252.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:12.424Z,1513233252.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:12.810Z,1513233252.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:12.824Z,1513233252.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:13.218Z,1513233253.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:13.233Z,1513233253.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:13.615Z,1513233253.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:13.650Z,1513233253.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:13.995Z,1513233253.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:14.034Z,1513233254.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:14.394Z,1513233254.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:14.427Z,1513233254.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:14.792Z,1513233254.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:14.831Z,1513233254.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:15.199Z,1513233255.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:15.229Z,1513233255.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:15.617Z,1513233255.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:15.632Z,1513233255.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:16.013Z,1513233256.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:16.028Z,1513233256.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:16.421Z,1513233256.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:16.443Z,1513233256.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:16.790Z,1513233256.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:16.835Z,1513233256.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:17.222Z,1513233257.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:17.229Z,1513233257.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x14905 got:0x15487
2017-12-14T06:34:17.255Z,1513233257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:17.600Z,1513233257.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:17.633Z,1513233257.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:17.995Z,1513233257.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:18.042Z,1513233258.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:18.395Z,1513233258.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:18.430Z,1513233258.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:18.802Z,1513233258.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:18.848Z,1513233258.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:19.221Z,1513233259.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:19.236Z,1513233259.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:19.603Z,1513233259.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:19.641Z,1513233259.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:20.056Z,1513233260.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:20.103Z,1513233260.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:20.399Z,1513233260.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:20.434Z,1513233260.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:20.801Z,1513233260.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:20.835Z,1513233260.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:21.210Z,1513233261.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:21.237Z,1513233261.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:21.611Z,1513233261.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:21.643Z,1513233261.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:22.007Z,1513233262.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:22.034Z,1513233262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:22.412Z,1513233262.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:22.435Z,1513233262.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:22.799Z,1513233262.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:22.838Z,1513233262.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:23.201Z,1513233263.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:23.238Z,1513233263.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x62808 got:0x49334
2017-12-14T06:34:23.280Z,1513233263.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:23.604Z,1513233263.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:23.629Z,1513233263.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:24.001Z,1513233264.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:24.036Z,1513233264.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:24.401Z,1513233264.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:24.434Z,1513233264.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:24.804Z,1513233264.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:24.811Z,1513233264.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x18704 got:0x22535
2017-12-14T06:34:24.836Z,1513233264.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:25.210Z,1513233265.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:25.237Z,1513233265.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:25.610Z,1513233265.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:25.633Z,1513233265.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:25.995Z,1513233265.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:26.035Z,1513233266.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:26.422Z,1513233266.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:26.454Z,1513233266.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:26.811Z,1513233266.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:26.849Z,1513233266.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:27.205Z,1513233267.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:27.219Z,1513233267.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:27.617Z,1513233267.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:27.642Z,1513233267.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:28.011Z,1513233268.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:28.042Z,1513233268.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:28.414Z,1513233268.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:28.444Z,1513233268.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:28.804Z,1513233268.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:28.824Z,1513233268.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:29.202Z,1513233269.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:29.224Z,1513233269.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:29.610Z,1513233269.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:29.625Z,1513233269.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:29.997Z,1513233269.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:30.027Z,1513233270.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:30.396Z,1513233270.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:30.422Z,1513233270.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:30.830Z,1513233270.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:30.909Z,1513233270.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:31.218Z,1513233271.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:31.234Z,1513233271.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:31.615Z,1513233271.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:31.629Z,1513233271.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:31.994Z,1513233271.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:32.035Z,1513233272.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:32.399Z,1513233272.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:32.432Z,1513233272.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:32.793Z,1513233272.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:32.883Z,1513233272.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:33.207Z,1513233273.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:33.221Z,1513233273.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:33.618Z,1513233273.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:33.647Z,1513233273.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:34.002Z,1513233274.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:34.024Z,1513233274.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:34.416Z,1513233274.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:34.447Z,1513233274.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:34.806Z,1513233274.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:34.866Z,1513233274.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:35.196Z,1513233275.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:35.231Z,1513233275.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:35.595Z,1513233275.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:35.635Z,1513233275.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:36.006Z,1513233276.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:36.035Z,1513233276.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:36.430Z,1513233276.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:36.446Z,1513233276.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:36.806Z,1513233276.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:36.838Z,1513233276.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:37.208Z,1513233277.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:37.228Z,1513233277.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:37.607Z,1513233277.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:37.627Z,1513233277.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:38.009Z,1513233278.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:38.037Z,1513233278.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:38.408Z,1513233278.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:38.424Z,1513233278.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:38.816Z,1513233278.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:38.855Z,1513233278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:39.209Z,1513233279.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:39.223Z,1513233279.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:39.618Z,1513233279.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:39.655Z,1513233279.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:40.010Z,1513233280.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:40.024Z,1513233280.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:40.416Z,1513233280.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:40.435Z,1513233280.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:40.805Z,1513233280.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:40.832Z,1513233280.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:41.211Z,1513233281.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:41.270Z,1513233281.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:41.602Z,1513233281.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:41.628Z,1513233281.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:41.991Z,1513233281.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:42.032Z,1513233282.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:42.418Z,1513233282.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:42.449Z,1513233282.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:42.814Z,1513233282.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:42.846Z,1513233282.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:43.222Z,1513233283.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:43.238Z,1513233283.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:43.602Z,1513233283.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:43.645Z,1513233283.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:43.996Z,1513233283.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:44.035Z,1513233284.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:44.396Z,1513233284.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:44.411Z,1513233284.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:44.808Z,1513233284.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:44.836Z,1513233284.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:45.201Z,1513233285.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:45.243Z,1513233285.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:45.605Z,1513233285.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:45.634Z,1513233285.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:45.886Z,1513233285.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:46.032Z,1513233286.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:46.047Z,1513233286.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:46.478Z,1513233286.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:46.502Z,1513233286.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:46.681Z,1513233286.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:46.804Z,1513233286.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:46.826Z,1513233286.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:47.212Z,1513233287.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:47.226Z,1513233287.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:47.601Z,1513233287.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:47.639Z,1513233287.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:48.008Z,1513233288.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:48.024Z,1513233288.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:48.391Z,1513233288.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:48.436Z,1513233288.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:48.838Z,1513233288.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:48.845Z,1513233288.845 [PNI_TCM](ERROR): CRC does not match. Expected:0x39900 got:0x39543
2017-12-14T06:34:48.891Z,1513233288.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:49.237Z,1513233289.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:49.259Z,1513233289.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:49.618Z,1513233289.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:49.648Z,1513233289.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:50.037Z,1513233290.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:50.051Z,1513233290.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:50.406Z,1513233290.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:50.421Z,1513233290.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:50.803Z,1513233290.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:50.831Z,1513233290.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:51.210Z,1513233291.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:51.224Z,1513233291.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:51.614Z,1513233291.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:51.635Z,1513233291.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:52.018Z,1513233292.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:52.051Z,1513233292.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:52.415Z,1513233292.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:52.436Z,1513233292.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:52.816Z,1513233292.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:52.831Z,1513233292.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:53.191Z,1513233293.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:53.276Z,1513233293.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:53.599Z,1513233293.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:53.629Z,1513233293.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:54.012Z,1513233294.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:54.066Z,1513233294.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:54.399Z,1513233294.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:54.427Z,1513233294.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:54.810Z,1513233294.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:54.862Z,1513233294.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:55.219Z,1513233295.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:55.271Z,1513233295.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:55.604Z,1513233295.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:55.633Z,1513233295.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:56.000Z,1513233296.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:56.036Z,1513233296.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:56.399Z,1513233296.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:56.447Z,1513233296.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:56.821Z,1513233296.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:56.836Z,1513233296.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:34:57.211Z,1513233297.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:34:57.236Z,1513233297.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:00.726Z,1513233300.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:00.742Z,1513233300.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:00.858Z,1513233300.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:00.915Z,1513233300.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:01.218Z,1513233301.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:01.233Z,1513233301.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:01.645Z,1513233301.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:01.664Z,1513233301.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:02.002Z,1513233302.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:02.023Z,1513233302.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:02.403Z,1513233302.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:02.417Z,1513233302.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:02.820Z,1513233302.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:02.834Z,1513233302.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:03.222Z,1513233303.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:03.267Z,1513233303.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:03.617Z,1513233303.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:03.631Z,1513233303.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:04.008Z,1513233304.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:04.024Z,1513233304.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:04.391Z,1513233304.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:04.440Z,1513233304.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:04.820Z,1513233304.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:04.868Z,1513233304.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:05.218Z,1513233305.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:05.233Z,1513233305.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:05.617Z,1513233305.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:05.639Z,1513233305.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:06.020Z,1513233306.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:06.035Z,1513233306.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:06.421Z,1513233306.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:06.437Z,1513233306.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:06.803Z,1513233306.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:06.818Z,1513233306.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:07.215Z,1513233307.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:07.230Z,1513233307.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:07.591Z,1513233307.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:07.627Z,1513233307.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:08.039Z,1513233308.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:08.074Z,1513233308.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:08.415Z,1513233308.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:08.436Z,1513233308.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:08.815Z,1513233308.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:08.835Z,1513233308.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:09.227Z,1513233309.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:09.243Z,1513233309.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:09.618Z,1513233309.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:09.639Z,1513233309.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:10.005Z,1513233310.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:10.032Z,1513233310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:10.399Z,1513233310.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:10.425Z,1513233310.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:10.791Z,1513233310.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:10.831Z,1513233310.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:11.215Z,1513233311.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:11.239Z,1513233311.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:11.626Z,1513233311.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:11.643Z,1513233311.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:12.015Z,1513233312.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:12.029Z,1513233312.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:12.418Z,1513233312.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:12.448Z,1513233312.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:12.791Z,1513233312.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:12.823Z,1513233312.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:13.199Z,1513233313.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:13.225Z,1513233313.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:13.599Z,1513233313.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:13.627Z,1513233313.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:13.993Z,1513233313.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:14.037Z,1513233314.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:14.425Z,1513233314.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:14.452Z,1513233314.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:14.811Z,1513233314.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:14.839Z,1513233314.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:15.207Z,1513233315.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:15.267Z,1513233315.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:15.609Z,1513233315.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:15.650Z,1513233315.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:16.005Z,1513233316.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:16.054Z,1513233316.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:16.404Z,1513233316.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:16.423Z,1513233316.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:16.806Z,1513233316.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:16.854Z,1513233316.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:17.191Z,1513233317.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:17.235Z,1513233317.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:17.662Z,1513233317.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:17.689Z,1513233317.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:18.016Z,1513233318.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:18.039Z,1513233318.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:18.420Z,1513233318.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:18.436Z,1513233318.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:18.791Z,1513233318.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:18.839Z,1513233318.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:19.191Z,1513233319.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:19.226Z,1513233319.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:19.596Z,1513233319.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:19.629Z,1513233319.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:19.998Z,1513233319.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:20.028Z,1513233320.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:20.394Z,1513233320.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:20.430Z,1513233320.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:20.826Z,1513233320.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:20.854Z,1513233320.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:21.207Z,1513233321.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:21.243Z,1513233321.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:21.610Z,1513233321.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:21.643Z,1513233321.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:21.986Z,1513233321.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:22.025Z,1513233322.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:22.402Z,1513233322.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:22.435Z,1513233322.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:22.810Z,1513233322.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:22.842Z,1513233322.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:23.205Z,1513233323.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:23.219Z,1513233323.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:23.617Z,1513233323.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:23.642Z,1513233323.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:24.043Z,1513233324.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:24.071Z,1513233324.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:24.407Z,1513233324.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:24.444Z,1513233324.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:24.805Z,1513233324.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:24.819Z,1513233324.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:25.201Z,1513233325.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:25.264Z,1513233325.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:25.605Z,1513233325.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:25.620Z,1513233325.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:26.007Z,1513233326.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:26.045Z,1513233326.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:26.402Z,1513233326.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:26.437Z,1513233326.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:26.808Z,1513233326.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:26.826Z,1513233326.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:27.231Z,1513233327.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:27.263Z,1513233327.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:27.610Z,1513233327.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:27.631Z,1513233327.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:28.003Z,1513233328.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:28.017Z,1513233328.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:28.401Z,1513233328.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:28.424Z,1513233328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:28.812Z,1513233328.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:28.826Z,1513233328.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:29.202Z,1513233329.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:29.227Z,1513233329.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:29.613Z,1513233329.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:29.632Z,1513233329.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:30.022Z,1513233330.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:30.036Z,1513233330.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:30.455Z,1513233330.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:30.511Z,1513233330.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:30.807Z,1513233330.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:30.827Z,1513233330.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:31.217Z,1513233331.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:31.232Z,1513233331.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:31.606Z,1513233331.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:31.626Z,1513233331.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:32.010Z,1513233332.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:32.034Z,1513233332.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:32.407Z,1513233332.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:32.421Z,1513233332.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:32.822Z,1513233332.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:32.837Z,1513233332.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:33.214Z,1513233333.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:33.237Z,1513233333.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:33.633Z,1513233333.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:33.656Z,1513233333.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:33.994Z,1513233333.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:34.028Z,1513233334.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:34.400Z,1513233334.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:34.425Z,1513233334.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:34.791Z,1513233334.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:34.831Z,1513233334.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:35.216Z,1513233335.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:35.231Z,1513233335.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:35.617Z,1513233335.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:35.639Z,1513233335.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:36.017Z,1513233336.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:36.032Z,1513233336.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:36.419Z,1513233336.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:36.434Z,1513233336.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:36.806Z,1513233336.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:36.842Z,1513233336.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:37.205Z,1513233337.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:37.294Z,1513233337.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:37.601Z,1513233337.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:37.616Z,1513233337.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:38.001Z,1513233338.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:38.063Z,1513233338.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:38.400Z,1513233338.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:38.416Z,1513233338.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:38.805Z,1513233338.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:38.854Z,1513233338.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:39.221Z,1513233339.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:39.247Z,1513233339.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:39.613Z,1513233339.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:39.640Z,1513233339.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:40.055Z,1513233340.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:40.106Z,1513233340.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:40.405Z,1513233340.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:40.424Z,1513233340.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:40.811Z,1513233340.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:40.831Z,1513233340.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:41.211Z,1513233341.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:41.227Z,1513233341.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:41.613Z,1513233341.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:41.628Z,1513233341.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:42.014Z,1513233342.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:42.043Z,1513233342.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:42.413Z,1513233342.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:42.428Z,1513233342.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:42.804Z,1513233342.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:42.826Z,1513233342.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:43.242Z,1513233343.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:43.261Z,1513233343.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:43.605Z,1513233343.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:43.627Z,1513233343.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:44.008Z,1513233344.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:44.023Z,1513233344.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:44.390Z,1513233344.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:44.423Z,1513233344.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:44.809Z,1513233344.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:44.843Z,1513233344.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:45.211Z,1513233345.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:45.242Z,1513233345.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:45.618Z,1513233345.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:45.633Z,1513233345.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:45.992Z,1513233345.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:46.026Z,1513233346.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:46.417Z,1513233346.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:46.468Z,1513233346.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:46.818Z,1513233346.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:46.834Z,1513233346.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:47.200Z,1513233347.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:47.264Z,1513233347.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:47.622Z,1513233347.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:47.637Z,1513233347.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:48.016Z,1513233348.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:48.036Z,1513233348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:48.412Z,1513233348.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:48.433Z,1513233348.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:48.796Z,1513233348.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:48.831Z,1513233348.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:49.190Z,1513233349.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:49.228Z,1513233349.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:49.589Z,1513233349.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:49.622Z,1513233349.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:49.997Z,1513233349.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:50.023Z,1513233350.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:50.400Z,1513233350.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:50.427Z,1513233350.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:50.822Z,1513233350.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:50.837Z,1513233350.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:51.212Z,1513233351.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:51.244Z,1513233351.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:51.615Z,1513233351.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:51.636Z,1513233351.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:51.997Z,1513233351.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:52.026Z,1513233352.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:52.390Z,1513233352.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:52.437Z,1513233352.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:52.820Z,1513233352.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:52.835Z,1513233352.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:53.195Z,1513233353.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:53.236Z,1513233353.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:53.610Z,1513233353.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:53.643Z,1513233353.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:54.028Z,1513233354.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:54.044Z,1513233354.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:54.420Z,1513233354.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:54.439Z,1513233354.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:54.811Z,1513233354.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:54.830Z,1513233354.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:55.203Z,1513233355.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:55.238Z,1513233355.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:55.592Z,1513233355.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:55.635Z,1513233355.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:56.031Z,1513233356.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:56.063Z,1513233356.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:56.408Z,1513233356.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:56.443Z,1513233356.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:56.817Z,1513233356.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:56.840Z,1513233356.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:57.234Z,1513233357.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:57.255Z,1513233357.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:35:57.619Z,1513233357.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:35:57.648Z,1513233357.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:01.088Z,1513233361.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:01.170Z,1513233361.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:01.258Z,1513233361.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:01.282Z,1513233361.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:01.656Z,1513233361.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:01.706Z,1513233361.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:02.058Z,1513233362.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:02.072Z,1513233362.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:02.460Z,1513233362.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:02.531Z,1513233362.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:02.838Z,1513233362.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:02.870Z,1513233362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:03.238Z,1513233363.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:03.265Z,1513233363.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:03.653Z,1513233363.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:03.672Z,1513233363.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:04.039Z,1513233364.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:04.066Z,1513233364.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:04.438Z,1513233364.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:04.459Z,1513233364.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:04.850Z,1513233364.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:04.876Z,1513233364.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:05.258Z,1513233365.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:05.289Z,1513233365.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:05.692Z,1513233365.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:05.733Z,1513233365.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:06.043Z,1513233366.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:06.058Z,1513233366.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:06.443Z,1513233366.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:06.457Z,1513233366.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:06.849Z,1513233366.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:06.864Z,1513233366.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:07.246Z,1513233367.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:07.283Z,1513233367.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:07.658Z,1513233367.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:07.688Z,1513233367.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:08.048Z,1513233368.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:08.064Z,1513233368.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:08.450Z,1513233368.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:08.465Z,1513233368.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:08.884Z,1513233368.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:08.900Z,1513233368.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:09.248Z,1513233369.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:09.267Z,1513233369.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:09.649Z,1513233369.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:09.671Z,1513233369.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:10.047Z,1513233370.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:10.062Z,1513233370.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:10.448Z,1513233370.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:10.463Z,1513233370.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:10.850Z,1513233370.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:10.967Z,1513233370.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:11.258Z,1513233371.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:11.272Z,1513233371.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:11.658Z,1513233371.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:11.672Z,1513233371.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:12.060Z,1513233372.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:12.100Z,1513233372.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:12.439Z,1513233372.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:12.471Z,1513233372.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:12.852Z,1513233372.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:12.868Z,1513233372.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:13.238Z,1513233373.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:13.274Z,1513233373.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:13.662Z,1513233373.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:13.677Z,1513233373.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:14.064Z,1513233374.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:14.078Z,1513233374.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:14.463Z,1513233374.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:14.478Z,1513233374.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:14.840Z,1513233374.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:14.875Z,1513233374.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:15.275Z,1513233375.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:15.323Z,1513233375.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:15.647Z,1513233375.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:15.682Z,1513233375.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:16.044Z,1513233376.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:16.058Z,1513233376.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:16.447Z,1513233376.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:16.486Z,1513233376.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:16.851Z,1513233376.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:16.878Z,1513233376.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:17.272Z,1513233377.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:17.287Z,1513233377.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:17.649Z,1513233377.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:17.684Z,1513233377.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:18.044Z,1513233378.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:18.059Z,1513233378.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:18.474Z,1513233378.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:18.504Z,1513233378.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:18.839Z,1513233378.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:18.876Z,1513233378.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:19.267Z,1513233379.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:19.292Z,1513233379.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:19.652Z,1513233379.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:19.688Z,1513233379.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:20.055Z,1513233380.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:20.089Z,1513233380.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:20.456Z,1513233380.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:20.487Z,1513233380.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:20.850Z,1513233380.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:20.926Z,1513233380.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:21.251Z,1513233381.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:21.271Z,1513233381.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:21.651Z,1513233381.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:21.679Z,1513233381.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:22.042Z,1513233382.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:22.080Z,1513233382.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:22.440Z,1513233382.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:22.491Z,1513233382.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:22.852Z,1513233382.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:22.892Z,1513233382.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:23.260Z,1513233383.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:23.364Z,1513233383.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:23.651Z,1513233383.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:23.694Z,1513233383.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:24.047Z,1513233384.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:24.111Z,1513233384.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:24.457Z,1513233384.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:24.496Z,1513233384.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:24.861Z,1513233384.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:24.992Z,1513233384.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:25.263Z,1513233385.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:25.312Z,1513233385.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:25.653Z,1513233385.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:25.692Z,1513233385.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:26.059Z,1513233386.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:26.123Z,1513233386.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:26.472Z,1513233386.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:26.507Z,1513233386.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:26.846Z,1513233386.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:26.862Z,1513233386.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:27.254Z,1513233387.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:27.268Z,1513233387.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:27.639Z,1513233387.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:27.670Z,1513233387.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:28.057Z,1513233388.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:28.088Z,1513233388.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:28.441Z,1513233388.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:28.491Z,1513233388.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:28.866Z,1513233388.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:28.896Z,1513233388.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:29.261Z,1513233389.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:29.276Z,1513233389.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:29.657Z,1513233389.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:29.711Z,1513233389.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:30.058Z,1513233390.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:30.073Z,1513233390.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:30.441Z,1513233390.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:30.488Z,1513233390.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:30.862Z,1513233390.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:30.876Z,1513233390.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:31.243Z,1513233391.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:31.320Z,1513233391.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:31.654Z,1513233391.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:31.703Z,1513233391.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:32.059Z,1513233392.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:32.129Z,1513233392.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:32.456Z,1513233392.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:32.487Z,1513233392.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:32.852Z,1513233392.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:32.874Z,1513233392.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:33.242Z,1513233393.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:33.318Z,1513233393.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:33.642Z,1513233393.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:33.678Z,1513233393.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:34.042Z,1513233394.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:34.083Z,1513233394.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:34.445Z,1513233394.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:34.494Z,1513233394.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:34.871Z,1513233394.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:34.921Z,1513233394.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:35.265Z,1513233395.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:35.291Z,1513233395.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:35.666Z,1513233395.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:35.751Z,1513233395.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:36.042Z,1513233396.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:36.089Z,1513233396.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:36.440Z,1513233396.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:36.487Z,1513233396.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:36.841Z,1513233396.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:36.898Z,1513233396.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:37.244Z,1513233397.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:37.289Z,1513233397.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:37.670Z,1513233397.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:37.699Z,1513233397.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:38.059Z,1513233398.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:38.111Z,1513233398.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:38.460Z,1513233398.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:38.546Z,1513233398.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:38.863Z,1513233398.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:38.887Z,1513233398.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:39.265Z,1513233399.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:39.322Z,1513233399.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:39.649Z,1513233399.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:39.672Z,1513233399.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:40.062Z,1513233400.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:40.098Z,1513233400.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:40.465Z,1513233400.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:40.507Z,1513233400.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:40.857Z,1513233400.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:40.939Z,1513233400.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:41.267Z,1513233401.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:41.291Z,1513233401.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:41.652Z,1513233401.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:41.721Z,1513233401.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:42.053Z,1513233402.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:42.115Z,1513233402.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:42.450Z,1513233402.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:42.487Z,1513233402.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:42.841Z,1513233402.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:42.899Z,1513233402.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:43.240Z,1513233403.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:43.260Z,1513233403.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:43.653Z,1513233403.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:43.669Z,1513233403.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:44.054Z,1513233404.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:44.071Z,1513233404.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:44.454Z,1513233404.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:44.468Z,1513233404.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:44.838Z,1513233404.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:44.880Z,1513233404.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:45.237Z,1513233405.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:45.279Z,1513233405.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:45.643Z,1513233405.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:45.666Z,1513233405.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:46.042Z,1513233406.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:46.088Z,1513233406.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:46.440Z,1513233406.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:46.455Z,1513233406.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:46.849Z,1513233406.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:46.896Z,1513233406.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:47.253Z,1513233407.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:47.268Z,1513233407.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:47.653Z,1513233407.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:47.667Z,1513233407.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:48.032Z,1513233408.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:48.075Z,1513233408.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:48.439Z,1513233408.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:48.459Z,1513233408.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:48.839Z,1513233408.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:48.859Z,1513233408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:49.239Z,1513233409.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:49.259Z,1513233409.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:49.653Z,1513233409.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:49.668Z,1513233409.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:50.055Z,1513233410.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:50.069Z,1513233410.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:50.454Z,1513233410.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:50.469Z,1513233410.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:50.839Z,1513233410.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:50.859Z,1513233410.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:51.249Z,1513233411.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:51.299Z,1513233411.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:51.639Z,1513233411.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:51.659Z,1513233411.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:52.041Z,1513233412.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:52.055Z,1513233412.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:52.441Z,1513233412.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:52.456Z,1513233412.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:52.850Z,1513233412.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:52.871Z,1513233412.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:53.265Z,1513233413.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:53.287Z,1513233413.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:53.678Z,1513233413.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:53.710Z,1513233413.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:54.032Z,1513233414.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:54.048Z,1513233414.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:54.440Z,1513233414.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:54.468Z,1513233414.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:54.840Z,1513233414.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:54.855Z,1513233414.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:55.239Z,1513233415.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:55.287Z,1513233415.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:55.653Z,1513233415.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:55.670Z,1513233415.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:56.053Z,1513233416.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:56.068Z,1513233416.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:56.454Z,1513233416.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:56.468Z,1513233416.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:56.839Z,1513233416.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:56.859Z,1513233416.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:57.238Z,1513233417.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:57.253Z,1513233417.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:36:57.640Z,1513233417.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:36:57.655Z,1513233417.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:01.104Z,1513233421.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:01.119Z,1513233421.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:01.221Z,1513233421.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:01.236Z,1513233421.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:01.581Z,1513233421.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:01.615Z,1513233421.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:01.994Z,1513233421.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:02.010Z,1513233422.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:02.385Z,1513233422.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:02.400Z,1513233422.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:02.779Z,1513233422.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:02.817Z,1513233422.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:03.168Z,1513233423.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:03.183Z,1513233423.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:03.572Z,1513233423.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:03.595Z,1513233423.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:03.968Z,1513233423.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:03.992Z,1513233423.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:04.365Z,1513233424.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:04.400Z,1513233424.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:04.790Z,1513233424.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:04.813Z,1513233424.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:05.179Z,1513233425.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:05.227Z,1513233425.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:05.587Z,1513233425.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:05.603Z,1513233425.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:05.971Z,1513233425.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:06.005Z,1513233426.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:06.378Z,1513233426.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:06.401Z,1513233426.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:06.765Z,1513233426.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:06.780Z,1513233426.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:07.200Z,1513233427.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:07.219Z,1513233427.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:07.581Z,1513233427.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:07.663Z,1513233427.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:07.663Z,1513233427.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2017-12-14T06:37:07.663Z,1513233427.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:37:07.665Z,1513233427.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:07.665Z,1513233427.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122
2017-12-14T06:37:07.665Z,1513233427.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:37:07.667Z,1513233427.667 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:07.667Z,1513233427.667 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2017-12-14T06:37:07.667Z,1513233427.667 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:37:07.679Z,1513233427.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:37:07.680Z,1513233427.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:37:07.680Z,1513233427.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:37:07.985Z,1513233427.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:08.057Z,1513233428.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:37:08.057Z,1513233428.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2017-12-14T06:37:08.058Z,1513233428.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:37:08.058Z,1513233428.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122
2017-12-14T06:37:08.058Z,1513233428.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:37:08.058Z,1513233428.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2017-12-14T06:37:08.382Z,1513233428.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:08.434Z,1513233428.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:37:08.434Z,1513233428.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:37:08.435Z,1513233428.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:37:08.435Z,1513233428.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:37:08.436Z,1513233428.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:37:08.436Z,1513233428.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:37:08.436Z,1513233428.436 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:37:08.437Z,1513233428.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:37:08.437Z,1513233428.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:37:08.770Z,1513233428.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:08.793Z,1513233428.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:09.179Z,1513233429.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:09.235Z,1513233429.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:09.565Z,1513233429.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:09.580Z,1513233429.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:09.995Z,1513233429.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:10.023Z,1513233430.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:10.368Z,1513233430.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:10.418Z,1513233430.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:10.782Z,1513233430.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:10.831Z,1513233430.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:11.191Z,1513233431.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:11.219Z,1513233431.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:11.587Z,1513233431.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:11.631Z,1513233431.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:11.968Z,1513233431.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:11.994Z,1513233431.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:12.370Z,1513233432.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:12.426Z,1513233432.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:12.764Z,1513233432.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:12.808Z,1513233432.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:13.180Z,1513233433.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:13.211Z,1513233433.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:13.600Z,1513233433.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:13.633Z,1513233433.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:13.982Z,1513233433.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:14.026Z,1513233434.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:14.378Z,1513233434.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:14.414Z,1513233434.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:14.787Z,1513233434.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:14.814Z,1513233434.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:15.191Z,1513233435.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:15.219Z,1513233435.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:15.571Z,1513233435.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:15.618Z,1513233435.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:15.971Z,1513233435.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:16.005Z,1513233436.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:16.370Z,1513233436.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:16.403Z,1513233436.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:16.798Z,1513233436.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:16.816Z,1513233436.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:17.198Z,1513233437.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:17.286Z,1513233437.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:17.634Z,1513233437.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:17.650Z,1513233437.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x833 got:0x53871
2017-12-14T06:37:17.667Z,1513233437.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:17.971Z,1513233437.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:18.019Z,1513233438.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:18.370Z,1513233438.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:18.411Z,1513233438.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:18.783Z,1513233438.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:18.820Z,1513233438.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:19.165Z,1513233439.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:19.180Z,1513233439.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:19.587Z,1513233439.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:19.613Z,1513233439.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:20.001Z,1513233440.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:20.016Z,1513233440.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:20.374Z,1513233440.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:20.417Z,1513233440.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:20.778Z,1513233440.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:20.821Z,1513233440.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:21.177Z,1513233441.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:21.214Z,1513233441.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:21.583Z,1513233441.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:21.612Z,1513233441.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:21.974Z,1513233441.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:22.014Z,1513233442.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:22.374Z,1513233442.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:22.422Z,1513233442.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:22.810Z,1513233442.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:22.876Z,1513233442.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:23.205Z,1513233443.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:23.220Z,1513233443.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:23.591Z,1513233443.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:23.639Z,1513233443.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:23.961Z,1513233443.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:23.984Z,1513233443.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:24.371Z,1513233444.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:24.404Z,1513233444.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:24.783Z,1513233444.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:24.810Z,1513233444.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:25.171Z,1513233445.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:25.218Z,1513233445.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:25.590Z,1513233445.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:25.613Z,1513233445.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:26.002Z,1513233446.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:26.018Z,1513233446.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:26.405Z,1513233446.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:26.443Z,1513233446.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:26.775Z,1513233446.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:26.818Z,1513233446.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:27.201Z,1513233447.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:27.218Z,1513233447.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:27.575Z,1513233447.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:27.619Z,1513233447.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:27.971Z,1513233447.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:28.004Z,1513233448.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:28.371Z,1513233448.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:28.418Z,1513233448.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:28.804Z,1513233448.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:28.942Z,1513233448.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:29.209Z,1513233449.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:29.299Z,1513233449.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:29.600Z,1513233449.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:29.623Z,1513233449.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:29.961Z,1513233449.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:29.993Z,1513233449.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:30.373Z,1513233450.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:30.423Z,1513233450.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:30.780Z,1513233450.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:30.811Z,1513233450.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:31.177Z,1513233451.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:31.235Z,1513233451.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:31.585Z,1513233451.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:31.619Z,1513233451.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:31.989Z,1513233451.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:32.027Z,1513233452.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:32.384Z,1513233452.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:32.415Z,1513233452.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:32.781Z,1513233452.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:32.796Z,1513233452.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:33.175Z,1513233453.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:33.222Z,1513233453.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:33.575Z,1513233453.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:33.618Z,1513233453.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:33.977Z,1513233453.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:33.998Z,1513233453.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:34.373Z,1513233454.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:34.396Z,1513233454.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:34.789Z,1513233454.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:34.827Z,1513233454.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:35.209Z,1513233455.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:35.231Z,1513233455.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:35.612Z,1513233455.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:35.636Z,1513233455.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:35.983Z,1513233455.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:35.998Z,1513233455.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:36.378Z,1513233456.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:36.425Z,1513233456.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:36.775Z,1513233456.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:36.791Z,1513233456.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:37.180Z,1513233457.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:37.203Z,1513233457.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:37.586Z,1513233457.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:37.600Z,1513233457.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:37.986Z,1513233457.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:38.028Z,1513233458.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:38.382Z,1513233458.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:38.404Z,1513233458.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:38.826Z,1513233458.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:38.855Z,1513233458.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:39.190Z,1513233459.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:39.231Z,1513233459.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:39.579Z,1513233459.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:39.639Z,1513233459.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:39.983Z,1513233459.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:40.007Z,1513233460.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:40.384Z,1513233460.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:40.406Z,1513233460.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:40.795Z,1513233460.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:40.822Z,1513233460.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:41.185Z,1513233461.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:41.226Z,1513233461.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:41.587Z,1513233461.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:41.610Z,1513233461.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:41.979Z,1513233461.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:42.003Z,1513233462.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:42.382Z,1513233462.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:42.447Z,1513233462.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:42.790Z,1513233462.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:42.828Z,1513233462.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:43.179Z,1513233463.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:43.208Z,1513233463.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:43.599Z,1513233463.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:43.614Z,1513233463.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:43.990Z,1513233463.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:44.006Z,1513233464.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:44.389Z,1513233464.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:44.429Z,1513233464.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:44.779Z,1513233464.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:44.795Z,1513233464.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:45.189Z,1513233465.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:45.208Z,1513233465.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:45.585Z,1513233465.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:45.616Z,1513233465.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:45.985Z,1513233465.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:46.017Z,1513233466.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:46.370Z,1513233466.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:46.408Z,1513233466.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:46.801Z,1513233466.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:46.816Z,1513233466.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:47.200Z,1513233467.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:47.216Z,1513233467.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:47.595Z,1513233467.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:47.638Z,1513233467.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:47.971Z,1513233467.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:48.007Z,1513233468.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:48.388Z,1513233468.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:48.405Z,1513233468.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:48.797Z,1513233468.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:48.816Z,1513233468.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:49.179Z,1513233469.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:49.222Z,1513233469.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:49.586Z,1513233469.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:49.620Z,1513233469.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:50.022Z,1513233470.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:50.114Z,1513233470.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:50.390Z,1513233470.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:50.413Z,1513233470.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:50.780Z,1513233470.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:50.813Z,1513233470.813 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T06:37:50.813Z,1513233470.813 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:37:50.813Z,1513233470.813 [BPC1](ERROR): Data Fault
2017-12-14T06:37:50.830Z,1513233470.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:50.843Z,1513233470.843 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:37:51.191Z,1513233471.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:51.219Z,1513233471.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:51.571Z,1513233471.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:51.607Z,1513233471.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:51.971Z,1513233471.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:52.003Z,1513233472.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:52.053Z,1513233472.053 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:37:52.053Z,1513233472.053 [BPC1] No Fault, FailCount= 1
2017-12-14T06:37:52.366Z,1513233472.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:52.451Z,1513233472.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:52.808Z,1513233472.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:52.823Z,1513233472.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:53.199Z,1513233473.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:53.221Z,1513233473.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:53.598Z,1513233473.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:53.612Z,1513233473.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:53.978Z,1513233473.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:54.016Z,1513233474.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:54.377Z,1513233474.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:54.409Z,1513233474.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:54.799Z,1513233474.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:54.815Z,1513233474.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:55.206Z,1513233475.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:55.233Z,1513233475.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:55.589Z,1513233475.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:55.639Z,1513233475.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:56.018Z,1513233476.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:56.052Z,1513233476.052 [PNI_TCM](ERROR): CRC does not match. Expected:0x15346 got:0x16896
2017-12-14T06:37:56.072Z,1513233476.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:56.382Z,1513233476.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:56.412Z,1513233476.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:56.782Z,1513233476.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:56.813Z,1513233476.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:57.176Z,1513233477.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:57.219Z,1513233477.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:57.570Z,1513233477.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:57.592Z,1513233477.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:37:57.977Z,1513233477.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:37:58.020Z,1513233478.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:01.460Z,1513233481.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:01.524Z,1513233481.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:01.748Z,1513233481.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:01.780Z,1513233481.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:02.109Z,1513233482.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:02.124Z,1513233482.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:02.510Z,1513233482.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:02.525Z,1513233482.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:02.922Z,1513233482.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:02.988Z,1513233482.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:03.287Z,1513233483.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:03.312Z,1513233483.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:03.687Z,1513233483.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:03.719Z,1513233483.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:04.085Z,1513233484.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:04.116Z,1513233484.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:04.503Z,1513233484.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:04.518Z,1513233484.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:04.998Z,1513233484.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:05.026Z,1513233485.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:05.310Z,1513233485.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:05.326Z,1513233485.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:05.705Z,1513233485.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:05.724Z,1513233485.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:06.090Z,1513233486.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:06.116Z,1513233486.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:06.491Z,1513233486.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:06.517Z,1513233486.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:06.899Z,1513233486.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:06.925Z,1513233486.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:07.292Z,1513233487.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:07.327Z,1513233487.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:07.713Z,1513233487.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:07.731Z,1513233487.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:08.111Z,1513233488.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:08.127Z,1513233488.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:08.505Z,1513233488.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:08.536Z,1513233488.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:08.897Z,1513233488.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:08.912Z,1513233488.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:09.303Z,1513233489.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:09.339Z,1513233489.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:09.695Z,1513233489.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:09.709Z,1513233489.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:10.094Z,1513233490.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:10.110Z,1513233490.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:10.492Z,1513233490.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:10.507Z,1513233490.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:10.904Z,1513233490.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:10.923Z,1513233490.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:11.306Z,1513233491.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:11.361Z,1513233491.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:11.718Z,1513233491.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:11.739Z,1513233491.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:12.087Z,1513233492.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:12.123Z,1513233492.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:12.491Z,1513233492.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:12.524Z,1513233492.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:12.894Z,1513233492.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:12.931Z,1513233492.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:13.294Z,1513233493.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:13.363Z,1513233493.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:13.705Z,1513233493.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:13.720Z,1513233493.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:14.109Z,1513233494.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:14.124Z,1513233494.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:14.519Z,1513233494.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:14.587Z,1513233494.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:14.900Z,1513233494.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:14.915Z,1513233494.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:15.303Z,1513233495.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:15.359Z,1513233495.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:15.687Z,1513233495.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:15.723Z,1513233495.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:16.086Z,1513233496.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:16.119Z,1513233496.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:16.487Z,1513233496.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:16.513Z,1513233496.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:16.930Z,1513233496.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:16.993Z,1513233496.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:17.302Z,1513233497.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:17.330Z,1513233497.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:17.706Z,1513233497.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:17.739Z,1513233497.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:18.104Z,1513233498.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:18.127Z,1513233498.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:18.497Z,1513233498.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:18.512Z,1513233498.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:18.894Z,1513233498.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:19.003Z,1513233499.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:19.291Z,1513233499.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:19.323Z,1513233499.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:19.705Z,1513233499.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:19.720Z,1513233499.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:20.108Z,1513233500.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:20.123Z,1513233500.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:20.507Z,1513233500.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:20.522Z,1513233500.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:20.892Z,1513233500.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:20.951Z,1513233500.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:21.295Z,1513233501.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:21.310Z,1513233501.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:21.695Z,1513233501.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:21.711Z,1513233501.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:22.098Z,1513233502.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:22.119Z,1513233502.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:22.495Z,1513233502.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:22.509Z,1513233502.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:22.904Z,1513233502.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:22.943Z,1513233502.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:23.307Z,1513233503.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:23.326Z,1513233503.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:23.712Z,1513233503.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:23.759Z,1513233503.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:24.114Z,1513233504.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:24.143Z,1513233504.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:24.490Z,1513233504.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:24.523Z,1513233504.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:24.902Z,1513233504.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:24.923Z,1513233504.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:25.294Z,1513233505.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:25.317Z,1513233505.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:25.706Z,1513233505.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:25.731Z,1513233505.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:26.106Z,1513233506.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:26.128Z,1513233506.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:26.506Z,1513233506.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:26.532Z,1513233506.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:26.892Z,1513233506.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:26.911Z,1513233506.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:27.305Z,1513233507.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:27.336Z,1513233507.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:27.687Z,1513233507.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:27.719Z,1513233507.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:28.088Z,1513233508.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:28.115Z,1513233508.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:28.487Z,1513233508.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:28.513Z,1513233508.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:28.910Z,1513233508.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:29.012Z,1513233509.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:29.310Z,1513233509.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:29.326Z,1513233509.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:29.713Z,1513233509.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:29.728Z,1513233509.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:30.081Z,1513233510.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:30.104Z,1513233510.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:30.532Z,1513233510.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:30.568Z,1513233510.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:30.888Z,1513233510.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:30.968Z,1513233510.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:31.296Z,1513233511.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:31.312Z,1513233511.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:31.703Z,1513233511.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:31.719Z,1513233511.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:32.102Z,1513233512.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:32.117Z,1513233512.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:32.502Z,1513233512.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:32.517Z,1513233512.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:32.904Z,1513233512.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:32.993Z,1513233512.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:33.295Z,1513233513.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:33.316Z,1513233513.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:33.730Z,1513233513.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:33.761Z,1513233513.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:34.087Z,1513233514.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:34.120Z,1513233514.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:34.505Z,1513233514.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:34.524Z,1513233514.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:34.901Z,1513233514.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:34.928Z,1513233514.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:35.302Z,1513233515.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:35.316Z,1513233515.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:35.687Z,1513233515.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:35.754Z,1513233515.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:36.096Z,1513233516.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:36.111Z,1513233516.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:36.494Z,1513233516.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:36.554Z,1513233516.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:36.905Z,1513233516.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:36.928Z,1513233516.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:37.310Z,1513233517.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:37.356Z,1513233517.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:37.711Z,1513233517.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:37.731Z,1513233517.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:38.101Z,1513233518.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:38.115Z,1513233518.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:38.499Z,1513233518.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:38.514Z,1513233518.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:38.887Z,1513233518.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:38.919Z,1513233518.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:39.306Z,1513233519.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:39.326Z,1513233519.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:39.710Z,1513233519.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:39.724Z,1513233519.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:40.156Z,1513233520.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:40.185Z,1513233520.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:40.498Z,1513233520.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:40.532Z,1513233520.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:40.891Z,1513233520.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:40.907Z,1513233520.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:41.296Z,1513233521.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:41.311Z,1513233521.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:41.692Z,1513233521.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:41.708Z,1513233521.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:42.091Z,1513233522.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:42.106Z,1513233522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:42.494Z,1513233522.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:42.516Z,1513233522.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:42.909Z,1513233522.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:42.940Z,1513233522.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:43.342Z,1513233523.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:43.386Z,1513233523.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:43.710Z,1513233523.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:43.741Z,1513233523.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:44.092Z,1513233524.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:44.121Z,1513233524.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:44.497Z,1513233524.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:44.511Z,1513233524.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:44.892Z,1513233524.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:44.984Z,1513233524.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:45.287Z,1513233525.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:45.313Z,1513233525.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:45.705Z,1513233525.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:45.753Z,1513233525.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:46.108Z,1513233526.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:46.124Z,1513233526.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:46.526Z,1513233526.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:46.570Z,1513233526.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:46.887Z,1513233526.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:46.976Z,1513233526.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:47.287Z,1513233527.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:47.319Z,1513233527.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:47.687Z,1513233527.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:47.713Z,1513233527.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:48.091Z,1513233528.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:48.119Z,1513233528.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:48.491Z,1513233528.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:48.524Z,1513233528.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:48.905Z,1513233528.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:48.931Z,1513233528.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:49.316Z,1513233529.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:49.330Z,1513233529.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:49.756Z,1513233529.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:49.791Z,1513233529.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:50.093Z,1513233530.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:50.134Z,1513233530.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:50.487Z,1513233530.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:50.503Z,1513233530.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:50.907Z,1513233530.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:50.960Z,1513233530.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:51.287Z,1513233531.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:51.319Z,1513233531.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:51.706Z,1513233531.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:51.721Z,1513233531.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:52.117Z,1513233532.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:52.132Z,1513233532.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:52.512Z,1513233532.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:52.526Z,1513233532.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:52.920Z,1513233532.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:52.967Z,1513233532.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:53.295Z,1513233533.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:53.328Z,1513233533.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:53.691Z,1513233533.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:53.726Z,1513233533.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:54.088Z,1513233534.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:54.103Z,1513233534.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:54.491Z,1513233534.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:54.506Z,1513233534.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:54.914Z,1513233534.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:54.935Z,1513233534.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:55.310Z,1513233535.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:55.324Z,1513233535.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:55.708Z,1513233535.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:55.723Z,1513233535.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:56.114Z,1513233536.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:56.161Z,1513233536.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:56.497Z,1513233536.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:56.515Z,1513233536.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:56.902Z,1513233536.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:56.917Z,1513233536.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:56.920Z,1513233536.920 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:38:56.920Z,1513233536.920 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:38:56.921Z,1513233536.921 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:38:56.921Z,1513233536.921 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:38:57.289Z,1513233537.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:57.326Z,1513233537.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:57.330Z,1513233537.330 [Default:CheckIn:D] Stopped
2017-12-14T06:38:57.330Z,1513233537.330 [Default:CheckIn:E] Running Loop=1
2017-12-14T06:38:57.710Z,1513233537.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:57.773Z,1513233537.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:38:57.777Z,1513233537.777 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 365.698991 min 
2017-12-14T06:38:57.777Z,1513233537.777 [Default:CheckIn:E] Stopped
2017-12-14T06:38:57.777Z,1513233537.777 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T06:38:57.777Z,1513233537.777 [Default:CheckIn] Stopped
2017-12-14T06:38:57.777Z,1513233537.777 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T06:38:57.778Z,1513233537.778 [Default:CheckIn](INFO): Running loop #36
2017-12-14T06:38:57.778Z,1513233537.778 [Default:CheckIn] Running Loop=36
2017-12-14T06:38:57.778Z,1513233537.778 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T06:38:57.778Z,1513233537.778 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T06:38:58.108Z,1513233538.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:38:58.178Z,1513233538.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:01.578Z,1513233541.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:01.617Z,1513233541.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:01.699Z,1513233541.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:01.719Z,1513233541.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:02.076Z,1513233542.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:02.092Z,1513233542.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:02.519Z,1513233542.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:02.634Z,1513233542.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:02.882Z,1513233542.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:02.896Z,1513233542.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:03.281Z,1513233543.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:03.327Z,1513233543.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:03.689Z,1513233543.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:03.723Z,1513233543.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:04.090Z,1513233544.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:04.123Z,1513233544.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:04.485Z,1513233544.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:04.523Z,1513233544.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:04.870Z,1513233544.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:04.903Z,1513233544.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:05.271Z,1513233545.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:05.302Z,1513233545.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:05.670Z,1513233545.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:05.703Z,1513233545.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:06.079Z,1513233546.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:06.106Z,1513233546.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:06.476Z,1513233546.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:06.508Z,1513233546.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:06.891Z,1513233546.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:06.914Z,1513233546.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:07.290Z,1513233547.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:07.312Z,1513233547.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:07.690Z,1513233547.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:07.719Z,1513233547.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:08.077Z,1513233548.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:08.092Z,1513233548.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:08.480Z,1513233548.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:08.495Z,1513233548.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:08.544Z,1513233548.544 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:39:08.905Z,1513233548.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:08.940Z,1513233548.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:09.270Z,1513233549.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:09.304Z,1513233549.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:09.688Z,1513233549.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:09.707Z,1513233549.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:10.088Z,1513233550.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:10.103Z,1513233550.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:10.490Z,1513233550.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:10.508Z,1513233550.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:10.871Z,1513233550.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:10.902Z,1513233550.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:11.271Z,1513233551.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:11.308Z,1513233551.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:11.670Z,1513233551.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:11.719Z,1513233551.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:12.075Z,1513233552.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:12.162Z,1513233552.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:12.483Z,1513233552.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:12.515Z,1513233552.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:12.890Z,1513233552.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:12.982Z,1513233552.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:13.291Z,1513233553.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:13.318Z,1513233553.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:13.694Z,1513233553.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:13.708Z,1513233553.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:14.074Z,1513233554.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:14.096Z,1513233554.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:14.479Z,1513233554.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:14.499Z,1513233554.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:14.882Z,1513233554.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:14.929Z,1513233554.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:15.307Z,1513233555.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:15.347Z,1513233555.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:15.691Z,1513233555.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:15.708Z,1513233555.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:16.086Z,1513233556.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:16.108Z,1513233556.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:16.486Z,1513233556.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:16.512Z,1513233556.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:16.878Z,1513233556.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:16.892Z,1513233556.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:17.276Z,1513233557.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:17.315Z,1513233557.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:17.678Z,1513233557.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:17.696Z,1513233557.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:18.080Z,1513233558.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:18.095Z,1513233558.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:18.526Z,1513233558.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:18.620Z,1513233558.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:18.894Z,1513233558.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:18.919Z,1513233558.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:19.296Z,1513233559.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:19.311Z,1513233559.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:19.694Z,1513233559.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:19.715Z,1513233559.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:20.075Z,1513233560.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:20.109Z,1513233560.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:20.474Z,1513233560.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:20.507Z,1513233560.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:20.871Z,1513233560.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:20.903Z,1513233560.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:21.291Z,1513233561.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:21.311Z,1513233561.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:21.686Z,1513233561.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:21.716Z,1513233561.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:22.086Z,1513233562.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:22.108Z,1513233562.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:22.504Z,1513233562.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:22.519Z,1513233562.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:22.879Z,1513233562.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:22.908Z,1513233562.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:23.280Z,1513233563.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:23.307Z,1513233563.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:23.681Z,1513233563.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:23.746Z,1513233563.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:24.084Z,1513233564.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:24.098Z,1513233564.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:24.476Z,1513233564.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:24.492Z,1513233564.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:24.894Z,1513233564.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:24.940Z,1513233564.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:25.292Z,1513233565.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:25.311Z,1513233565.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:25.684Z,1513233565.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:25.703Z,1513233565.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:26.083Z,1513233566.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:26.103Z,1513233566.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:26.481Z,1513233566.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:26.495Z,1513233566.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:26.884Z,1513233566.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:26.962Z,1513233566.962 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:39:26.962Z,1513233566.962 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:39:26.962Z,1513233566.962 [BPC1](ERROR): Communications Fault
2017-12-14T06:39:26.983Z,1513233566.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:27.021Z,1513233567.021 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:39:27.270Z,1513233567.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:27.303Z,1513233567.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:27.694Z,1513233567.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:27.708Z,1513233567.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:28.120Z,1513233568.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:28.150Z,1513233568.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:28.196Z,1513233568.196 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:39:28.196Z,1513233568.196 [BPC1] No Fault, FailCount= 1
2017-12-14T06:39:28.502Z,1513233568.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:28.575Z,1513233568.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:28.875Z,1513233568.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:28.973Z,1513233568.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:29.271Z,1513233569.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:29.311Z,1513233569.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:29.672Z,1513233569.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:29.687Z,1513233569.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:30.078Z,1513233570.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:30.092Z,1513233570.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:30.479Z,1513233570.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:30.511Z,1513233570.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:30.893Z,1513233570.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:30.923Z,1513233570.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:31.321Z,1513233571.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:31.383Z,1513233571.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:31.682Z,1513233571.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:31.700Z,1513233571.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:32.077Z,1513233572.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:32.099Z,1513233572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:32.481Z,1513233572.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:32.495Z,1513233572.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:32.879Z,1513233572.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:32.899Z,1513233572.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:33.280Z,1513233573.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:33.303Z,1513233573.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:33.686Z,1513233573.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:33.701Z,1513233573.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:34.084Z,1513233574.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:34.100Z,1513233574.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:34.516Z,1513233574.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:34.540Z,1513233574.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:34.869Z,1513233574.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:34.899Z,1513233574.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:35.272Z,1513233575.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:35.298Z,1513233575.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:35.671Z,1513233575.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:35.703Z,1513233575.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:36.071Z,1513233576.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:36.106Z,1513233576.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:36.482Z,1513233576.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:36.503Z,1513233576.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:36.890Z,1513233576.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:36.951Z,1513233576.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:37.294Z,1513233577.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:37.309Z,1513233577.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:37.694Z,1513233577.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:37.709Z,1513233577.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:38.071Z,1513233578.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:38.102Z,1513233578.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:38.474Z,1513233578.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:38.509Z,1513233578.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:38.882Z,1513233578.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:38.906Z,1513233578.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:39.278Z,1513233579.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:39.315Z,1513233579.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:39.689Z,1513233579.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:39.721Z,1513233579.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:40.094Z,1513233580.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:40.119Z,1513233580.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:40.494Z,1513233580.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:40.519Z,1513233580.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:40.947Z,1513233580.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:40.984Z,1513233580.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:41.276Z,1513233581.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:41.303Z,1513233581.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:41.681Z,1513233581.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:41.703Z,1513233581.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:42.095Z,1513233582.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:42.151Z,1513233582.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:42.481Z,1513233582.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:42.496Z,1513233582.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:42.887Z,1513233582.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:42.969Z,1513233582.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:43.292Z,1513233583.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:43.361Z,1513233583.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:43.692Z,1513233583.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:43.707Z,1513233583.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:44.084Z,1513233584.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:44.099Z,1513233584.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:44.494Z,1513233584.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:44.508Z,1513233584.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:44.872Z,1513233584.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:44.903Z,1513233584.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:45.271Z,1513233585.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:45.308Z,1513233585.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:45.682Z,1513233585.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:45.719Z,1513233585.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:46.095Z,1513233586.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:46.115Z,1513233586.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:46.496Z,1513233586.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:46.511Z,1513233586.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:46.881Z,1513233586.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:46.896Z,1513233586.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:47.308Z,1513233587.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:47.367Z,1513233587.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:47.670Z,1513233587.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:47.733Z,1513233587.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:48.071Z,1513233588.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:48.097Z,1513233588.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:48.475Z,1513233588.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:48.573Z,1513233588.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:48.894Z,1513233588.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:48.910Z,1513233588.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:49.299Z,1513233589.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:49.347Z,1513233589.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:49.696Z,1513233589.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:49.711Z,1513233589.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:50.070Z,1513233590.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:50.093Z,1513233590.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:50.495Z,1513233590.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:50.584Z,1513233590.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:50.880Z,1513233590.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:50.894Z,1513233590.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:51.278Z,1513233591.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:51.301Z,1513233591.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:51.686Z,1513233591.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:51.701Z,1513233591.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:52.084Z,1513233592.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:52.100Z,1513233592.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:52.485Z,1513233592.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:52.508Z,1513233592.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:52.877Z,1513233592.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:52.899Z,1513233592.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:53.284Z,1513233593.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:53.299Z,1513233593.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:53.683Z,1513233593.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:53.697Z,1513233593.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:54.072Z,1513233594.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:54.108Z,1513233594.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:54.475Z,1513233594.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:54.508Z,1513233594.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:54.881Z,1513233594.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:54.971Z,1513233594.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:55.289Z,1513233595.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:55.320Z,1513233595.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:55.690Z,1513233595.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:55.718Z,1513233595.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:56.081Z,1513233596.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:56.121Z,1513233596.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:56.475Z,1513233596.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:56.491Z,1513233596.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:56.880Z,1513233596.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:57.004Z,1513233597.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:57.296Z,1513233597.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:57.315Z,1513233597.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:57.699Z,1513233597.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:57.755Z,1513233597.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:58.087Z,1513233598.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:58.115Z,1513233598.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:39:58.485Z,1513233598.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:39:58.515Z,1513233598.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:01.882Z,1513233601.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:01.897Z,1513233601.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:01.991Z,1513233601.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:02.027Z,1513233602.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:02.399Z,1513233602.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:02.422Z,1513233602.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:02.793Z,1513233602.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:02.824Z,1513233602.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:03.184Z,1513233603.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:03.199Z,1513233603.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:03.578Z,1513233603.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:03.622Z,1513233603.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:03.982Z,1513233603.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:04.003Z,1513233604.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:04.382Z,1513233604.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:04.404Z,1513233604.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:04.806Z,1513233604.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:04.835Z,1513233604.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:05.186Z,1513233605.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:05.226Z,1513233605.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:05.582Z,1513233605.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:05.605Z,1513233605.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:05.986Z,1513233605.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:06.005Z,1513233606.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:06.386Z,1513233606.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:06.400Z,1513233606.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:06.781Z,1513233606.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:06.824Z,1513233606.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:07.176Z,1513233607.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:07.207Z,1513233607.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:07.595Z,1513233607.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:07.610Z,1513233607.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:07.993Z,1513233607.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:08.009Z,1513233608.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:08.388Z,1513233608.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:08.430Z,1513233608.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:08.780Z,1513233608.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:08.873Z,1513233608.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:08.873Z,1513233608.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123
2017-12-14T06:40:08.873Z,1513233608.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:40:08.875Z,1513233608.875 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:08.875Z,1513233608.875 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 123
2017-12-14T06:40:08.875Z,1513233608.875 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:40:08.877Z,1513233608.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:08.877Z,1513233608.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2017-12-14T06:40:08.877Z,1513233608.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:40:08.889Z,1513233608.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:40:08.889Z,1513233608.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:40:08.937Z,1513233608.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:40:09.201Z,1513233609.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:09.251Z,1513233609.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:40:09.251Z,1513233609.251 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123
2017-12-14T06:40:09.252Z,1513233609.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:40:09.252Z,1513233609.252 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 123
2017-12-14T06:40:09.252Z,1513233609.252 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:40:09.252Z,1513233609.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2017-12-14T06:40:09.616Z,1513233609.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:09.702Z,1513233609.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:40:09.702Z,1513233609.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:40:09.702Z,1513233609.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:40:09.703Z,1513233609.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:40:09.703Z,1513233609.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:40:09.703Z,1513233609.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:40:09.704Z,1513233609.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:40:09.704Z,1513233609.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:40:09.704Z,1513233609.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:40:09.972Z,1513233609.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:09.999Z,1513233609.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:10.368Z,1513233610.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:10.418Z,1513233610.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:10.798Z,1513233610.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:10.820Z,1513233610.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:11.199Z,1513233611.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:11.219Z,1513233611.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:11.596Z,1513233611.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:11.631Z,1513233611.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:11.974Z,1513233611.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:12.015Z,1513233612.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:12.374Z,1513233612.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:12.411Z,1513233612.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:12.772Z,1513233612.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:12.844Z,1513233612.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:13.176Z,1513233613.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:13.218Z,1513233613.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:13.590Z,1513233613.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:13.621Z,1513233613.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:13.988Z,1513233613.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:14.016Z,1513233614.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:14.392Z,1513233614.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:14.414Z,1513233614.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:14.777Z,1513233614.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:14.817Z,1513233614.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:15.179Z,1513233615.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:15.220Z,1513233615.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:15.580Z,1513233615.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:15.617Z,1513233615.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:15.994Z,1513233615.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:16.059Z,1513233616.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:16.377Z,1513233616.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:16.423Z,1513233616.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:16.781Z,1513233616.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:16.816Z,1513233616.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:17.205Z,1513233617.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:17.227Z,1513233617.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:17.594Z,1513233617.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:17.623Z,1513233617.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:17.977Z,1513233617.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:18.022Z,1513233618.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:18.379Z,1513233618.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:18.424Z,1513233618.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:18.777Z,1513233618.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:18.835Z,1513233618.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:19.227Z,1513233619.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:19.268Z,1513233619.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:19.594Z,1513233619.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:19.624Z,1513233619.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:19.989Z,1513233619.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:20.023Z,1513233620.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:20.398Z,1513233620.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:20.422Z,1513233620.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:20.783Z,1513233620.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:20.798Z,1513233620.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:21.183Z,1513233621.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:21.239Z,1513233621.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:21.577Z,1513233621.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:21.593Z,1513233621.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:21.978Z,1513233621.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:21.999Z,1513233621.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:22.387Z,1513233622.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:22.426Z,1513233622.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:22.788Z,1513233622.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:22.831Z,1513233622.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:23.196Z,1513233623.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:23.216Z,1513233623.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:23.596Z,1513233623.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:23.611Z,1513233623.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:23.982Z,1513233623.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:24.007Z,1513233624.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:24.384Z,1513233624.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:24.414Z,1513233624.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:24.786Z,1513233624.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:24.809Z,1513233624.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:25.173Z,1513233625.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:25.211Z,1513233625.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:25.645Z,1513233625.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:25.664Z,1513233625.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:25.994Z,1513233625.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:26.039Z,1513233626.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:26.399Z,1513233626.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:26.423Z,1513233626.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:26.770Z,1513233626.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:26.807Z,1513233626.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:27.190Z,1513233627.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:27.219Z,1513233627.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:27.570Z,1513233627.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:27.615Z,1513233627.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:27.975Z,1513233627.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:28.008Z,1513233628.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:28.375Z,1513233628.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:28.423Z,1513233628.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:28.813Z,1513233628.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:28.860Z,1513233628.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:29.199Z,1513233629.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:29.222Z,1513233629.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:29.599Z,1513233629.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:29.690Z,1513233629.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:29.974Z,1513233629.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:30.015Z,1513233630.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:30.379Z,1513233630.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:30.431Z,1513233630.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:30.771Z,1513233630.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:30.815Z,1513233630.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:31.175Z,1513233631.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:31.220Z,1513233631.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:31.585Z,1513233631.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:31.622Z,1513233631.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:32.005Z,1513233632.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:32.048Z,1513233632.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:32.381Z,1513233632.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:32.416Z,1513233632.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:32.779Z,1513233632.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:32.814Z,1513233632.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:33.175Z,1513233633.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:33.217Z,1513233633.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:33.583Z,1513233633.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:33.618Z,1513233633.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:33.980Z,1513233633.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:34.020Z,1513233634.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:34.372Z,1513233634.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:34.394Z,1513233634.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:34.797Z,1513233634.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:34.821Z,1513233634.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:35.210Z,1513233635.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:35.241Z,1513233635.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:35.593Z,1513233635.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:35.627Z,1513233635.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:35.976Z,1513233635.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:36.010Z,1513233636.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:36.383Z,1513233636.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:36.403Z,1513233636.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:36.785Z,1513233636.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:36.823Z,1513233636.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:37.179Z,1513233637.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:37.222Z,1513233637.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:37.582Z,1513233637.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:37.604Z,1513233637.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:37.983Z,1513233637.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:38.003Z,1513233638.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:38.428Z,1513233638.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:38.482Z,1513233638.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:38.781Z,1513233638.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:38.825Z,1513233638.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:39.180Z,1513233639.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:39.204Z,1513233639.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:39.581Z,1513233639.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:39.640Z,1513233639.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:39.987Z,1513233639.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:40.007Z,1513233640.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:40.385Z,1513233640.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:40.423Z,1513233640.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:40.786Z,1513233640.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:40.808Z,1513233640.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:41.191Z,1513233641.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:41.206Z,1513233641.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:41.601Z,1513233641.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:41.636Z,1513233641.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:41.978Z,1513233641.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:42.027Z,1513233642.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:42.385Z,1513233642.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:42.408Z,1513233642.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:42.780Z,1513233642.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:42.803Z,1513233642.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:43.191Z,1513233643.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:43.219Z,1513233643.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:43.596Z,1513233643.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:43.646Z,1513233643.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:43.983Z,1513233643.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:44.038Z,1513233644.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:44.399Z,1513233644.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:44.406Z,1513233644.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x60740 got:0x61467
2017-12-14T06:40:44.424Z,1513233644.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:44.811Z,1513233644.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:44.839Z,1513233644.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:45.170Z,1513233645.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:45.211Z,1513233645.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:45.574Z,1513233645.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:45.606Z,1513233645.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:45.976Z,1513233645.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:46.016Z,1513233646.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:46.378Z,1513233646.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:46.406Z,1513233646.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:46.791Z,1513233646.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:46.823Z,1513233646.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:47.206Z,1513233647.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:47.221Z,1513233647.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:47.600Z,1513233647.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:47.628Z,1513233647.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:47.998Z,1513233647.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:48.052Z,1513233648.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:48.371Z,1513233648.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:48.399Z,1513233648.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:48.771Z,1513233648.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:48.814Z,1513233648.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:49.171Z,1513233649.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:49.211Z,1513233649.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:49.598Z,1513233649.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:49.619Z,1513233649.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:49.999Z,1513233649.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:50.022Z,1513233650.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:50.403Z,1513233650.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:50.489Z,1513233650.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:50.774Z,1513233650.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:50.815Z,1513233650.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:51.199Z,1513233651.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:51.209Z,1513233651.209 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T06:40:51.271Z,1513233651.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:51.586Z,1513233651.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:51.623Z,1513233651.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:51.984Z,1513233651.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:52.043Z,1513233652.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:52.165Z,1513233652.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:52.387Z,1513233652.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:52.405Z,1513233652.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:52.790Z,1513233652.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:52.805Z,1513233652.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:52.962Z,1513233652.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:53.187Z,1513233653.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:53.230Z,1513233653.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:53.373Z,1513233653.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:53.587Z,1513233653.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:53.617Z,1513233653.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:53.984Z,1513233653.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:54.007Z,1513233654.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:54.399Z,1513233654.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:54.437Z,1513233654.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:54.780Z,1513233654.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:54.816Z,1513233654.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:55.184Z,1513233655.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:55.208Z,1513233655.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:55.595Z,1513233655.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:55.610Z,1513233655.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:55.995Z,1513233655.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:56.015Z,1513233656.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:56.396Z,1513233656.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:56.431Z,1513233656.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:56.771Z,1513233656.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:56.812Z,1513233656.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:57.184Z,1513233657.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:57.203Z,1513233657.203 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T06:40:57.238Z,1513233657.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:57.571Z,1513233657.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:57.611Z,1513233657.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:57.971Z,1513233657.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:57.995Z,1513233657.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:58.375Z,1513233658.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:58.410Z,1513233658.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:40:58.796Z,1513233658.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:40:58.823Z,1513233658.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:02.187Z,1513233662.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:02.243Z,1513233662.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:02.340Z,1513233662.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:02.394Z,1513233662.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:02.700Z,1513233662.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:02.753Z,1513233662.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:03.100Z,1513233663.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:03.115Z,1513233663.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:03.514Z,1513233663.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:03.528Z,1513233663.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:03.909Z,1513233663.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:03.924Z,1513233663.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:04.311Z,1513233664.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:04.331Z,1513233664.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:04.702Z,1513233664.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:04.718Z,1513233664.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:05.098Z,1513233665.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:05.120Z,1513233665.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:05.513Z,1513233665.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:05.536Z,1513233665.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:05.914Z,1513233665.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:05.972Z,1513233665.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:06.304Z,1513233666.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:06.319Z,1513233666.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:06.694Z,1513233666.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:06.709Z,1513233666.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:07.091Z,1513233667.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:07.190Z,1513233667.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:07.522Z,1513233667.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:07.538Z,1513233667.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:07.920Z,1513233667.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:07.939Z,1513233667.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:08.306Z,1513233668.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:08.331Z,1513233668.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:08.692Z,1513233668.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:08.711Z,1513233668.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:09.099Z,1513233669.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:09.135Z,1513233669.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:09.510Z,1513233669.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:09.541Z,1513233669.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:09.913Z,1513233669.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:09.946Z,1513233669.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:10.315Z,1513233670.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:10.348Z,1513233670.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:10.705Z,1513233670.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:10.720Z,1513233670.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:11.096Z,1513233671.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:11.123Z,1513233671.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:11.510Z,1513233671.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:11.531Z,1513233671.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:11.910Z,1513233671.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:11.942Z,1513233671.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:12.311Z,1513233672.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:12.331Z,1513233672.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:12.691Z,1513233672.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:12.782Z,1513233672.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:13.095Z,1513233673.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:13.131Z,1513233673.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:13.524Z,1513233673.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:13.586Z,1513233673.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:13.915Z,1513233673.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:13.948Z,1513233673.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:14.306Z,1513233674.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:14.358Z,1513233674.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:14.707Z,1513233674.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:14.740Z,1513233674.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:15.095Z,1513233675.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:15.115Z,1513233675.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:15.513Z,1513233675.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:15.543Z,1513233675.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:15.906Z,1513233675.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:15.944Z,1513233675.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:16.315Z,1513233676.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:16.345Z,1513233676.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:16.762Z,1513233676.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:16.802Z,1513233676.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:17.094Z,1513233677.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:17.173Z,1513233677.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:17.506Z,1513233677.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:17.520Z,1513233677.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:17.905Z,1513233677.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:17.920Z,1513233677.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:18.314Z,1513233678.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:18.328Z,1513233678.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:18.751Z,1513233678.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:18.765Z,1513233678.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:19.111Z,1513233679.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:19.126Z,1513233679.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:19.511Z,1513233679.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:19.526Z,1513233679.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:19.963Z,1513233679.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:20.027Z,1513233680.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:20.314Z,1513233680.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:20.371Z,1513233680.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:20.693Z,1513233680.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:20.748Z,1513233680.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:21.093Z,1513233681.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:21.132Z,1513233681.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:21.504Z,1513233681.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:21.542Z,1513233681.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:21.922Z,1513233681.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:21.949Z,1513233681.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:22.303Z,1513233682.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:22.335Z,1513233682.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:22.740Z,1513233682.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:22.811Z,1513233682.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:23.097Z,1513233683.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:23.146Z,1513233683.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:23.513Z,1513233683.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:23.552Z,1513233683.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:23.906Z,1513233683.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:23.931Z,1513233683.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:24.312Z,1513233684.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:24.362Z,1513233684.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:24.718Z,1513233684.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:24.765Z,1513233684.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:25.117Z,1513233685.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:25.161Z,1513233685.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:25.516Z,1513233685.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:25.536Z,1513233685.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:25.931Z,1513233685.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:25.946Z,1513233685.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:26.302Z,1513233686.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:26.335Z,1513233686.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:26.691Z,1513233686.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:26.748Z,1513233686.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:27.095Z,1513233687.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:27.132Z,1513233687.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:27.502Z,1513233687.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:27.557Z,1513233687.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:27.922Z,1513233687.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:27.951Z,1513233687.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:28.304Z,1513233688.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:28.319Z,1513233688.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:28.694Z,1513233688.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:28.739Z,1513233688.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:29.091Z,1513233689.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:29.128Z,1513233689.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:29.504Z,1513233689.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:29.531Z,1513233689.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:29.906Z,1513233689.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:29.955Z,1513233689.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:30.304Z,1513233690.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:30.342Z,1513233690.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:30.729Z,1513233690.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:30.744Z,1513233690.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:31.091Z,1513233691.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:31.128Z,1513233691.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:31.508Z,1513233691.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:31.563Z,1513233691.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:31.921Z,1513233691.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:31.964Z,1513233691.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:32.325Z,1513233692.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:32.374Z,1513233692.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:32.693Z,1513233692.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:32.764Z,1513233692.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:33.093Z,1513233693.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:33.226Z,1513233693.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:33.506Z,1513233693.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:33.547Z,1513233693.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:33.919Z,1513233693.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:33.996Z,1513233693.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:34.309Z,1513233694.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:34.393Z,1513233694.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:34.693Z,1513233694.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:34.763Z,1513233694.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:35.092Z,1513233695.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:35.172Z,1513233695.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:35.503Z,1513233695.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:35.570Z,1513233695.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:35.916Z,1513233695.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:35.935Z,1513233695.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:36.303Z,1513233696.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:36.377Z,1513233696.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:36.692Z,1513233696.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:36.731Z,1513233696.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:37.113Z,1513233697.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:37.156Z,1513233697.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:37.527Z,1513233697.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:37.567Z,1513233697.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:37.914Z,1513233697.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:37.974Z,1513233697.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:38.311Z,1513233698.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:38.335Z,1513233698.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:38.693Z,1513233698.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:38.751Z,1513233698.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:39.096Z,1513233699.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:39.136Z,1513233699.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:39.504Z,1513233699.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:39.554Z,1513233699.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:39.908Z,1513233699.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:39.962Z,1513233699.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:40.307Z,1513233700.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:40.343Z,1513233700.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:40.705Z,1513233700.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:40.743Z,1513233700.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:41.113Z,1513233701.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:41.144Z,1513233701.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:41.504Z,1513233701.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:41.547Z,1513233701.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:41.914Z,1513233701.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:41.959Z,1513233701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:42.310Z,1513233702.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:42.355Z,1513233702.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:42.700Z,1513233702.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:42.727Z,1513233702.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:43.107Z,1513233703.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:43.158Z,1513233703.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:43.509Z,1513233703.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:43.531Z,1513233703.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:43.910Z,1513233703.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:43.925Z,1513233703.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:44.308Z,1513233704.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:44.323Z,1513233704.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:44.706Z,1513233704.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:44.727Z,1513233704.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:45.101Z,1513233705.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:45.116Z,1513233705.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:45.510Z,1513233705.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:45.525Z,1513233705.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:45.941Z,1513233705.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:46.010Z,1513233706.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:46.313Z,1513233706.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:46.328Z,1513233706.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:46.704Z,1513233706.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:46.719Z,1513233706.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:47.094Z,1513233707.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:47.131Z,1513233707.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:47.515Z,1513233707.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:47.530Z,1513233707.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:47.917Z,1513233707.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:47.941Z,1513233707.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:48.309Z,1513233708.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:48.325Z,1513233708.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:48.691Z,1513233708.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:48.758Z,1513233708.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:49.090Z,1513233709.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:49.161Z,1513233709.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:49.502Z,1513233709.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:49.528Z,1513233709.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:49.923Z,1513233709.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:49.943Z,1513233709.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:50.303Z,1513233710.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:50.339Z,1513233710.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:50.691Z,1513233710.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:50.732Z,1513233710.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:51.095Z,1513233711.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:51.110Z,1513233711.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:51.510Z,1513233711.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:51.535Z,1513233711.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:51.909Z,1513233711.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:51.935Z,1513233711.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:52.352Z,1513233712.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:52.395Z,1513233712.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:52.692Z,1513233712.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:52.711Z,1513233712.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:53.102Z,1513233713.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:53.139Z,1513233713.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:53.499Z,1513233713.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:53.564Z,1513233713.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:53.899Z,1513233713.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:53.919Z,1513233713.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:54.296Z,1513233714.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:54.320Z,1513233714.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:54.705Z,1513233714.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:54.727Z,1513233714.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:55.106Z,1513233715.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:55.121Z,1513233715.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:55.537Z,1513233715.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:55.615Z,1513233715.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:55.899Z,1513233715.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:55.913Z,1513233715.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:56.298Z,1513233716.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:56.353Z,1513233716.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:56.700Z,1513233716.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:56.719Z,1513233716.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:57.117Z,1513233717.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:57.205Z,1513233717.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:57.509Z,1513233717.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:57.524Z,1513233717.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:57.908Z,1513233717.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:57.931Z,1513233717.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:58.310Z,1513233718.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:58.324Z,1513233718.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:58.732Z,1513233718.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:58.783Z,1513233718.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:41:59.112Z,1513233719.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:41:59.127Z,1513233719.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:02.655Z,1513233722.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:02.672Z,1513233722.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:02.777Z,1513233722.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:02.800Z,1513233722.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:03.130Z,1513233723.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:03.163Z,1513233723.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:03.527Z,1513233723.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:03.548Z,1513233723.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:03.921Z,1513233723.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:03.936Z,1513233723.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:04.320Z,1513233724.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:04.334Z,1513233724.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:04.730Z,1513233724.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:04.783Z,1513233724.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:05.168Z,1513233725.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:05.235Z,1513233725.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:05.533Z,1513233725.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:05.551Z,1513233725.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:05.921Z,1513233725.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:05.937Z,1513233725.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:06.318Z,1513233726.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:06.339Z,1513233726.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:06.720Z,1513233726.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:06.743Z,1513233726.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:07.120Z,1513233727.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:07.143Z,1513233727.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:07.535Z,1513233727.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:07.552Z,1513233727.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:07.931Z,1513233727.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:07.951Z,1513233727.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:08.380Z,1513233728.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:08.411Z,1513233728.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:08.719Z,1513233728.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:08.771Z,1513233728.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:09.120Z,1513233729.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:09.136Z,1513233729.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:09.516Z,1513233729.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:09.548Z,1513233729.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:09.922Z,1513233729.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:09.937Z,1513233729.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:10.321Z,1513233730.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:10.335Z,1513233730.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:10.729Z,1513233730.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:10.746Z,1513233730.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:11.134Z,1513233731.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:11.150Z,1513233731.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:11.532Z,1513233731.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:11.584Z,1513233731.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:11.920Z,1513233731.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:11.935Z,1513233731.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:12.321Z,1513233732.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:12.336Z,1513233732.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:12.720Z,1513233732.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:12.735Z,1513233732.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:13.121Z,1513233733.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:13.136Z,1513233733.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:13.534Z,1513233733.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:13.553Z,1513233733.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:13.933Z,1513233733.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:13.948Z,1513233733.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:14.333Z,1513233734.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:14.348Z,1513233734.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:14.722Z,1513233734.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:14.754Z,1513233734.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:15.120Z,1513233735.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:15.135Z,1513233735.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:15.534Z,1513233735.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:15.550Z,1513233735.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:15.930Z,1513233735.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:15.988Z,1513233735.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:16.333Z,1513233736.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:16.348Z,1513233736.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:16.723Z,1513233736.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:16.756Z,1513233736.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:17.119Z,1513233737.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:17.139Z,1513233737.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:17.534Z,1513233737.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:17.583Z,1513233737.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:17.936Z,1513233737.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:17.952Z,1513233737.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:18.335Z,1513233738.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:18.383Z,1513233738.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:18.719Z,1513233738.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:18.739Z,1513233738.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:19.121Z,1513233739.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:19.135Z,1513233739.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:19.538Z,1513233739.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:19.553Z,1513233739.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:19.937Z,1513233739.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:19.952Z,1513233739.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:20.326Z,1513233740.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:20.340Z,1513233740.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:20.719Z,1513233740.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:20.736Z,1513233740.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:21.119Z,1513233741.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:21.139Z,1513233741.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:21.533Z,1513233741.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:21.548Z,1513233741.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:21.934Z,1513233741.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:21.949Z,1513233741.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:22.333Z,1513233742.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:22.368Z,1513233742.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:22.720Z,1513233742.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:22.739Z,1513233742.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:23.120Z,1513233743.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:23.136Z,1513233743.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:23.534Z,1513233743.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:23.550Z,1513233743.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:23.937Z,1513233743.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:23.952Z,1513233743.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:24.330Z,1513233744.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:24.344Z,1513233744.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:24.719Z,1513233744.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:24.739Z,1513233744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:25.120Z,1513233745.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:25.139Z,1513233745.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:25.535Z,1513233745.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:25.551Z,1513233745.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:25.951Z,1513233745.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:25.978Z,1513233745.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:26.330Z,1513233746.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:26.368Z,1513233746.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:26.721Z,1513233746.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:26.776Z,1513233746.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:27.120Z,1513233747.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:27.148Z,1513233747.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:27.530Z,1513233747.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:27.553Z,1513233747.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:27.934Z,1513233747.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:27.959Z,1513233747.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:28.331Z,1513233748.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:28.351Z,1513233748.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:28.723Z,1513233748.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:28.769Z,1513233748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:29.120Z,1513233749.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:29.148Z,1513233749.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:29.530Z,1513233749.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:29.556Z,1513233749.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:29.934Z,1513233749.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:29.963Z,1513233749.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:30.332Z,1513233750.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:30.359Z,1513233750.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:30.737Z,1513233750.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:30.751Z,1513233750.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:31.127Z,1513233751.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:31.147Z,1513233751.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:31.542Z,1513233751.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:31.577Z,1513233751.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:31.933Z,1513233751.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:31.951Z,1513233751.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:32.330Z,1513233752.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:32.345Z,1513233752.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:32.727Z,1513233752.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:32.742Z,1513233752.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:33.126Z,1513233753.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:33.141Z,1513233753.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:33.529Z,1513233753.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:33.544Z,1513233753.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:33.952Z,1513233753.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:34.030Z,1513233754.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:34.338Z,1513233754.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:34.377Z,1513233754.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:34.742Z,1513233754.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:34.757Z,1513233754.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:35.119Z,1513233755.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:35.157Z,1513233755.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:35.541Z,1513233755.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:35.564Z,1513233755.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:35.942Z,1513233755.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:35.963Z,1513233755.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:36.330Z,1513233756.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:36.359Z,1513233756.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:36.778Z,1513233756.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:36.807Z,1513233756.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:37.119Z,1513233757.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:37.166Z,1513233757.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:37.530Z,1513233757.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:37.564Z,1513233757.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:37.938Z,1513233757.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:38.012Z,1513233758.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:38.343Z,1513233758.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:38.410Z,1513233758.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:38.746Z,1513233758.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:38.787Z,1513233758.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:39.124Z,1513233759.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:39.163Z,1513233759.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:39.542Z,1513233759.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:39.589Z,1513233759.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:39.940Z,1513233759.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:39.993Z,1513233759.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:40.341Z,1513233760.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:40.387Z,1513233760.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:40.726Z,1513233760.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:40.740Z,1513233760.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:41.122Z,1513233761.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:41.146Z,1513233761.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:41.538Z,1513233761.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:41.554Z,1513233761.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:41.938Z,1513233761.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:41.952Z,1513233761.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:42.337Z,1513233762.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:42.353Z,1513233762.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:42.723Z,1513233762.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:42.746Z,1513233762.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:43.174Z,1513233763.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:43.216Z,1513233763.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:43.538Z,1513233763.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:43.577Z,1513233763.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:43.940Z,1513233763.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:43.957Z,1513233763.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:44.341Z,1513233764.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:44.356Z,1513233764.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:44.727Z,1513233764.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:44.748Z,1513233764.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:45.142Z,1513233765.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:45.157Z,1513233765.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:45.542Z,1513233765.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:45.557Z,1513233765.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:45.935Z,1513233765.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:45.964Z,1513233765.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:46.344Z,1513233766.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:46.423Z,1513233766.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:46.719Z,1513233766.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:46.757Z,1513233766.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:47.125Z,1513233767.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:47.160Z,1513233767.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:47.542Z,1513233767.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:47.564Z,1513233767.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:47.942Z,1513233767.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:47.964Z,1513233767.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:48.325Z,1513233768.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:48.364Z,1513233768.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:48.719Z,1513233768.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:48.775Z,1513233768.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:49.131Z,1513233769.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:49.172Z,1513233769.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:49.531Z,1513233769.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:49.590Z,1513233769.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:49.951Z,1513233769.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:49.982Z,1513233769.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:50.332Z,1513233770.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:50.348Z,1513233770.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:50.728Z,1513233770.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:50.748Z,1513233770.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:51.132Z,1513233771.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:51.147Z,1513233771.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:51.539Z,1513233771.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:51.554Z,1513233771.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:51.935Z,1513233771.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:51.956Z,1513233771.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:52.336Z,1513233772.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:52.353Z,1513233772.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:52.761Z,1513233772.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:52.798Z,1513233772.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:53.128Z,1513233773.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:53.143Z,1513233773.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:53.502Z,1513233773.502 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T06:42:53.502Z,1513233773.502 [NAL9602] Data Fault, FailCount= 4
2017-12-14T06:42:53.502Z,1513233773.502 [NAL9602](ERROR): Data Fault
2017-12-14T06:42:53.524Z,1513233773.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:53.547Z,1513233773.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:53.582Z,1513233773.582 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T06:42:53.902Z,1513233773.902 [NAL9602](INFO): Powering down
2017-12-14T06:42:53.919Z,1513233773.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:53.963Z,1513233773.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:54.316Z,1513233774.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:54.343Z,1513233774.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:54.718Z,1513233774.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:54.732Z,1513233774.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:54.777Z,1513233774.777 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:42:54.777Z,1513233774.777 [NAL9602] No Fault, FailCount= 4
2017-12-14T06:42:55.118Z,1513233775.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:55.156Z,1513233775.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:55.522Z,1513233775.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:55.557Z,1513233775.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:55.965Z,1513233775.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:56.007Z,1513233776.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:56.325Z,1513233776.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:56.355Z,1513233776.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:56.720Z,1513233776.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:56.735Z,1513233776.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:57.120Z,1513233777.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:57.139Z,1513233777.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:57.526Z,1513233777.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:57.541Z,1513233777.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:57.925Z,1513233777.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:57.940Z,1513233777.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:58.327Z,1513233778.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:58.367Z,1513233778.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:58.727Z,1513233778.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:58.742Z,1513233778.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:42:59.163Z,1513233779.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:42:59.198Z,1513233779.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:02.549Z,1513233782.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:02.714Z,1513233782.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:02.822Z,1513233782.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:02.846Z,1513233782.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:03.174Z,1513233783.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:03.207Z,1513233783.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:03.581Z,1513233783.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:03.643Z,1513233783.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:03.975Z,1513233783.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:03.994Z,1513233783.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:04.369Z,1513233784.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:04.419Z,1513233784.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:04.770Z,1513233784.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:04.784Z,1513233784.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:05.172Z,1513233785.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:05.194Z,1513233785.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:05.575Z,1513233785.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:05.627Z,1513233785.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:05.972Z,1513233785.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:06.000Z,1513233786.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:06.360Z,1513233786.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:06.402Z,1513233786.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:06.774Z,1513233786.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:06.796Z,1513233786.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:07.163Z,1513233787.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:07.204Z,1513233787.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:07.564Z,1513233787.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:07.626Z,1513233787.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:07.963Z,1513233787.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:07.988Z,1513233787.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:08.361Z,1513233788.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:08.393Z,1513233788.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:08.781Z,1513233788.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:08.807Z,1513233788.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:09.167Z,1513233789.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:09.214Z,1513233789.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:09.563Z,1513233789.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:09.588Z,1513233789.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:09.961Z,1513233789.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:09.996Z,1513233789.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:09.996Z,1513233789.996 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124
2017-12-14T06:43:09.996Z,1513233789.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:43:10.002Z,1513233790.002 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:10.002Z,1513233790.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 124
2017-12-14T06:43:10.002Z,1513233790.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:43:10.004Z,1513233790.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:10.004Z,1513233790.004 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2017-12-14T06:43:10.004Z,1513233790.004 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:43:10.034Z,1513233790.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:43:10.034Z,1513233790.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:43:10.034Z,1513233790.034 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:43:10.367Z,1513233790.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:10.410Z,1513233790.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:43:10.410Z,1513233790.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124
2017-12-14T06:43:10.410Z,1513233790.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:43:10.410Z,1513233790.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 124
2017-12-14T06:43:10.411Z,1513233790.411 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:43:10.411Z,1513233790.411 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2017-12-14T06:43:10.758Z,1513233790.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:10.800Z,1513233790.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:43:10.805Z,1513233790.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:43:10.806Z,1513233790.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:43:10.807Z,1513233790.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:43:10.808Z,1513233790.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:43:10.821Z,1513233790.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:43:10.821Z,1513233790.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:43:10.822Z,1513233790.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:43:10.822Z,1513233790.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:43:11.180Z,1513233791.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:11.212Z,1513233791.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:11.570Z,1513233791.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:11.607Z,1513233791.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:11.970Z,1513233791.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:12.024Z,1513233792.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:12.370Z,1513233792.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:12.411Z,1513233792.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:12.772Z,1513233792.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:12.812Z,1513233792.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:13.180Z,1513233793.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:13.202Z,1513233793.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:13.560Z,1513233793.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:13.597Z,1513233793.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:13.971Z,1513233793.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:14.010Z,1513233794.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:14.371Z,1513233794.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:14.386Z,1513233794.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:14.772Z,1513233794.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:14.795Z,1513233794.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:15.185Z,1513233795.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:15.204Z,1513233795.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:15.570Z,1513233795.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:15.596Z,1513233795.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:15.963Z,1513233795.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:15.998Z,1513233795.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:16.374Z,1513233796.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:16.411Z,1513233796.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:16.763Z,1513233796.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:16.805Z,1513233796.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:17.166Z,1513233797.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:17.193Z,1513233797.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:17.571Z,1513233797.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:17.586Z,1513233797.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:17.967Z,1513233797.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:17.989Z,1513233797.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:18.367Z,1513233798.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:18.391Z,1513233798.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:18.812Z,1513233798.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:18.840Z,1513233798.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:19.171Z,1513233799.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:19.202Z,1513233799.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:19.574Z,1513233799.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:19.597Z,1513233799.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:19.975Z,1513233799.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:19.998Z,1513233799.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:20.371Z,1513233800.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:20.408Z,1513233800.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:20.780Z,1513233800.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:20.803Z,1513233800.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:21.167Z,1513233801.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:21.203Z,1513233801.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:21.575Z,1513233801.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:21.599Z,1513233801.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:22.026Z,1513233802.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:22.053Z,1513233802.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:22.377Z,1513233802.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:22.422Z,1513233802.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:22.774Z,1513233802.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:22.803Z,1513233802.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:23.176Z,1513233803.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:23.194Z,1513233803.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:23.572Z,1513233803.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:23.625Z,1513233803.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:23.946Z,1513233803.946 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:43:23.975Z,1513233803.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:24.008Z,1513233804.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:24.363Z,1513233804.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:24.431Z,1513233804.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:24.764Z,1513233804.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:24.827Z,1513233804.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:25.179Z,1513233805.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:25.248Z,1513233805.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:25.570Z,1513233805.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:25.603Z,1513233805.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:25.963Z,1513233805.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:26.015Z,1513233806.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:26.363Z,1513233806.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:26.408Z,1513233806.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:26.764Z,1513233806.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:26.817Z,1513233806.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:27.207Z,1513233807.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:27.222Z,1513233807.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:27.563Z,1513233807.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:27.606Z,1513233807.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:27.961Z,1513233807.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:27.984Z,1513233807.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:28.385Z,1513233808.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:28.423Z,1513233808.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:28.764Z,1513233808.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:28.806Z,1513233808.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:29.164Z,1513233809.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:29.179Z,1513233809.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:29.578Z,1513233809.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:29.611Z,1513233809.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:29.970Z,1513233809.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:30.010Z,1513233810.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:30.360Z,1513233810.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:30.400Z,1513233810.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:30.771Z,1513233810.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:30.806Z,1513233810.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:31.170Z,1513233811.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:31.192Z,1513233811.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:31.569Z,1513233811.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:31.596Z,1513233811.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:31.971Z,1513233811.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:31.986Z,1513233811.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:32.370Z,1513233812.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:32.394Z,1513233812.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:32.772Z,1513233812.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:32.793Z,1513233812.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:33.174Z,1513233813.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:33.213Z,1513233813.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:33.571Z,1513233813.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:33.586Z,1513233813.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:33.974Z,1513233813.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:33.997Z,1513233813.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:34.387Z,1513233814.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:34.401Z,1513233814.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:34.747Z,1513233814.747 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:43:34.790Z,1513233814.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:34.863Z,1513233814.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:35.166Z,1513233815.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:35.200Z,1513233815.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:35.587Z,1513233815.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:35.616Z,1513233815.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:35.991Z,1513233815.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:36.006Z,1513233816.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:36.390Z,1513233816.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:36.423Z,1513233816.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:36.763Z,1513233816.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:36.809Z,1513233816.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:37.163Z,1513233817.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:37.194Z,1513233817.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:37.564Z,1513233817.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:37.603Z,1513233817.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:37.963Z,1513233817.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:38.064Z,1513233818.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:38.385Z,1513233818.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:38.423Z,1513233818.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:38.784Z,1513233818.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:38.812Z,1513233818.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:39.197Z,1513233819.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:39.219Z,1513233819.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:39.571Z,1513233819.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:39.614Z,1513233819.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:39.974Z,1513233819.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:40.005Z,1513233820.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:40.367Z,1513233820.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:40.386Z,1513233820.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:40.774Z,1513233820.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:40.793Z,1513233820.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:41.193Z,1513233821.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:41.243Z,1513233821.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:41.586Z,1513233821.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:41.618Z,1513233821.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:41.977Z,1513233821.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:42.017Z,1513233822.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:42.381Z,1513233822.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:42.396Z,1513233822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:42.781Z,1513233822.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:42.823Z,1513233822.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:43.172Z,1513233823.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:43.208Z,1513233823.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:43.578Z,1513233823.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:43.600Z,1513233823.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:43.966Z,1513233823.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:44.003Z,1513233824.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:44.402Z,1513233824.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:44.420Z,1513233824.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x62834 got:0x440
2017-12-14T06:43:44.443Z,1513233824.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:44.782Z,1513233824.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:44.818Z,1513233824.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:45.177Z,1513233825.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:45.215Z,1513233825.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:45.564Z,1513233825.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:45.598Z,1513233825.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:45.970Z,1513233825.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:46.018Z,1513233826.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:46.371Z,1513233826.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:46.385Z,1513233826.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:46.774Z,1513233826.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:46.859Z,1513233826.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:47.167Z,1513233827.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:47.208Z,1513233827.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:47.586Z,1513233827.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:47.643Z,1513233827.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:47.994Z,1513233827.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:48.025Z,1513233828.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:48.393Z,1513233828.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:48.439Z,1513233828.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:48.783Z,1513233828.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:48.832Z,1513233828.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:49.163Z,1513233829.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:49.211Z,1513233829.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:49.561Z,1513233829.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:49.587Z,1513233829.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:49.963Z,1513233829.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:49.997Z,1513233829.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:50.394Z,1513233830.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:50.410Z,1513233830.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:50.787Z,1513233830.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:50.835Z,1513233830.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:51.186Z,1513233831.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:51.215Z,1513233831.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:51.564Z,1513233831.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:51.615Z,1513233831.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:51.963Z,1513233831.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:51.986Z,1513233831.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x58249 got:0x47389
2017-12-14T06:43:52.004Z,1513233832.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:52.363Z,1513233832.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:52.401Z,1513233832.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:52.767Z,1513233832.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:52.801Z,1513233832.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:53.166Z,1513233833.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:53.202Z,1513233833.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:53.591Z,1513233833.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:53.617Z,1513233833.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:53.995Z,1513233833.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:54.022Z,1513233834.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:54.384Z,1513233834.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:54.413Z,1513233834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:54.763Z,1513233834.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:54.806Z,1513233834.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:55.168Z,1513233835.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:55.210Z,1513233835.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:55.564Z,1513233835.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:55.613Z,1513233835.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:55.970Z,1513233835.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:55.985Z,1513233835.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:56.384Z,1513233836.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:56.416Z,1513233836.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:56.791Z,1513233836.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:56.843Z,1513233836.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:57.208Z,1513233837.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:57.261Z,1513233837.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:57.570Z,1513233837.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:57.613Z,1513233837.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:57.968Z,1513233837.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:57.991Z,1513233837.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:57.995Z,1513233837.995 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T06:38:57.8Z
2017-12-14T06:43:57.995Z,1513233837.995 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:43:57.995Z,1513233837.995 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:43:58.375Z,1513233838.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:58.392Z,1513233838.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:59.157Z,1513233839.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:59.194Z,1513233839.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:43:59.296Z,1513233839.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:43:59.334Z,1513233839.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:02.737Z,1513233842.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:02.770Z,1513233842.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:02.837Z,1513233842.837 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0144.lzma
2017-12-14T06:44:02.875Z,1513233842.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:02.890Z,1513233842.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:03.242Z,1513233843.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:03.264Z,1513233843.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:03.639Z,1513233843.639 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0144.lzma.bak
2017-12-14T06:44:03.640Z,1513233843.640 [DataOverHttps](INFO): SBD MOMSN=5438135
2017-12-14T06:44:03.694Z,1513233843.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:03.752Z,1513233843.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:04.944Z,1513233844.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:04.984Z,1513233844.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:05.079Z,1513233845.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:05.127Z,1513233845.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:08.612Z,1513233848.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:08.628Z,1513233848.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:08.743Z,1513233848.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:08.779Z,1513233848.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:09.102Z,1513233849.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:09.198Z,1513233849.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:09.491Z,1513233849.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:09.505Z,1513233849.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:09.894Z,1513233849.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:09.948Z,1513233849.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:10.285Z,1513233850.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:10.315Z,1513233850.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:13.690Z,1513233853.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:13.736Z,1513233853.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:13.749Z,1513233853.749 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T06:44:13.749Z,1513233853.749 [DropWeight] No Fault, FailCount= 1
2017-12-14T06:44:13.822Z,1513233853.822 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0145.lzma
2017-12-14T06:44:13.845Z,1513233853.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:13.894Z,1513233853.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:14.194Z,1513233854.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:14.209Z,1513233854.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:14.621Z,1513233854.621 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0145.lzma.bak
2017-12-14T06:44:14.621Z,1513233854.621 [DataOverHttps](INFO): SBD MOMSN=5438137
2017-12-14T06:44:14.665Z,1513233854.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:14.740Z,1513233854.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:15.743Z,1513233855.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:15.763Z,1513233855.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:15.766Z,1513233855.766 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:44:15.766Z,1513233855.766 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:44:15.766Z,1513233855.766 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:44:15.871Z,1513233855.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:15.915Z,1513233855.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:19.341Z,1513233859.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:19.356Z,1513233859.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:19.460Z,1513233859.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:19.499Z,1513233859.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:19.821Z,1513233859.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:19.922Z,1513233859.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:20.221Z,1513233860.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:20.246Z,1513233860.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:20.618Z,1513233860.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:20.660Z,1513233860.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:21.041Z,1513233861.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:21.056Z,1513233861.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:21.410Z,1513233861.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:21.445Z,1513233861.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:21.811Z,1513233861.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:21.863Z,1513233861.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:22.222Z,1513233862.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:22.255Z,1513233862.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:22.618Z,1513233862.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:22.643Z,1513233862.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:23.046Z,1513233863.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:23.076Z,1513233863.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:23.414Z,1513233863.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:23.458Z,1513233863.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:23.813Z,1513233863.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:23.827Z,1513233863.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:24.226Z,1513233864.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:24.251Z,1513233864.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:24.646Z,1513233864.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:24.673Z,1513233864.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:25.014Z,1513233865.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:25.030Z,1513233865.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:25.413Z,1513233865.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:25.428Z,1513233865.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:25.814Z,1513233865.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:25.828Z,1513233865.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:26.270Z,1513233866.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:26.317Z,1513233866.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:26.662Z,1513233866.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:26.676Z,1513233866.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:27.015Z,1513233867.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:27.034Z,1513233867.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:27.413Z,1513233867.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:27.429Z,1513233867.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:27.812Z,1513233867.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:27.827Z,1513233867.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:28.222Z,1513233868.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:28.237Z,1513233868.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:28.656Z,1513233868.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:28.675Z,1513233868.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:29.028Z,1513233869.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:29.043Z,1513233869.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:29.420Z,1513233869.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:29.471Z,1513233869.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:29.824Z,1513233869.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:29.839Z,1513233869.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:30.226Z,1513233870.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:30.242Z,1513233870.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:30.643Z,1513233870.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:30.680Z,1513233870.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:31.034Z,1513233871.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:31.049Z,1513233871.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:31.417Z,1513233871.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:31.432Z,1513233871.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:31.813Z,1513233871.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:31.839Z,1513233871.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:32.233Z,1513233872.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:32.248Z,1513233872.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:32.652Z,1513233872.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:32.715Z,1513233872.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:33.034Z,1513233873.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:33.054Z,1513233873.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:33.415Z,1513233873.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:33.444Z,1513233873.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:33.815Z,1513233873.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:33.902Z,1513233873.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:34.226Z,1513233874.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:34.255Z,1513233874.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:34.623Z,1513233874.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:34.649Z,1513233874.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:35.044Z,1513233875.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:35.102Z,1513233875.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:35.410Z,1513233875.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:35.425Z,1513233875.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:35.815Z,1513233875.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:35.867Z,1513233875.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:36.219Z,1513233876.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:36.239Z,1513233876.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:36.626Z,1513233876.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:36.641Z,1513233876.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:37.027Z,1513233877.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:37.048Z,1513233877.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:37.418Z,1513233877.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:37.432Z,1513233877.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:37.820Z,1513233877.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:37.839Z,1513233877.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:38.227Z,1513233878.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:38.242Z,1513233878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:38.664Z,1513233878.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:38.680Z,1513233878.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:39.031Z,1513233879.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:39.046Z,1513233879.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:39.425Z,1513233879.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:39.439Z,1513233879.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:39.800Z,1513233879.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:39.833Z,1513233879.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:40.231Z,1513233880.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:40.251Z,1513233880.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:40.660Z,1513233880.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:40.675Z,1513233880.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:41.021Z,1513233881.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:41.048Z,1513233881.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:41.408Z,1513233881.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:41.434Z,1513233881.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:41.803Z,1513233881.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:41.835Z,1513233881.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:42.240Z,1513233882.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:42.280Z,1513233882.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:42.644Z,1513233882.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:42.683Z,1513233882.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:43.026Z,1513233883.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:43.059Z,1513233883.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:43.408Z,1513233883.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:43.445Z,1513233883.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:43.803Z,1513233883.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:43.838Z,1513233883.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:44.217Z,1513233884.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:44.265Z,1513233884.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:44.652Z,1513233884.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:44.689Z,1513233884.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:45.039Z,1513233885.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:45.054Z,1513233885.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:45.442Z,1513233885.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:45.475Z,1513233885.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:45.812Z,1513233885.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:45.827Z,1513233885.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:46.218Z,1513233886.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:46.233Z,1513233886.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:46.700Z,1513233886.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:46.714Z,1513233886.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:47.030Z,1513233887.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:47.060Z,1513233887.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:47.415Z,1513233887.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:47.431Z,1513233887.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:47.813Z,1513233887.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:47.835Z,1513233887.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:48.219Z,1513233888.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:48.235Z,1513233888.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:48.677Z,1513233888.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:48.696Z,1513233888.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:49.034Z,1513233889.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:49.049Z,1513233889.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:49.424Z,1513233889.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:49.439Z,1513233889.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:49.803Z,1513233889.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:49.843Z,1513233889.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:50.234Z,1513233890.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:50.248Z,1513233890.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:50.621Z,1513233890.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:50.636Z,1513233890.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:51.040Z,1513233891.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:51.080Z,1513233891.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:51.405Z,1513233891.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:51.445Z,1513233891.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:51.830Z,1513233891.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:51.863Z,1513233891.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:52.214Z,1513233892.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:52.247Z,1513233892.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:52.646Z,1513233892.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:52.661Z,1513233892.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:53.014Z,1513233893.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:53.041Z,1513233893.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:53.412Z,1513233893.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:53.438Z,1513233893.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:53.836Z,1513233893.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:53.851Z,1513233893.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:54.228Z,1513233894.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:54.247Z,1513233894.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:54.687Z,1513233894.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:54.702Z,1513233894.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:55.031Z,1513233895.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:55.087Z,1513233895.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:55.410Z,1513233895.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:55.443Z,1513233895.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:55.810Z,1513233895.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:55.828Z,1513233895.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:56.225Z,1513233896.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:56.318Z,1513233896.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:56.641Z,1513233896.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:56.668Z,1513233896.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:57.029Z,1513233897.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:57.083Z,1513233897.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:57.417Z,1513233897.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:57.462Z,1513233897.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:57.807Z,1513233897.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:57.866Z,1513233897.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:58.234Z,1513233898.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:58.274Z,1513233898.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:58.651Z,1513233898.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:58.666Z,1513233898.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:59.022Z,1513233899.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:59.043Z,1513233899.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:59.421Z,1513233899.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:59.436Z,1513233899.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:44:59.818Z,1513233899.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:44:59.832Z,1513233899.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:00.223Z,1513233900.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:00.238Z,1513233900.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:00.641Z,1513233900.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:00.676Z,1513233900.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:01.026Z,1513233901.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:01.041Z,1513233901.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:01.433Z,1513233901.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:01.473Z,1513233901.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:01.830Z,1513233901.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:01.845Z,1513233901.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:02.232Z,1513233902.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:02.251Z,1513233902.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:02.630Z,1513233902.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:02.651Z,1513233902.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:03.025Z,1513233903.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:03.040Z,1513233903.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:03.404Z,1513233903.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:03.439Z,1513233903.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:03.804Z,1513233903.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:04.030Z,1513233904.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:04.227Z,1513233904.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:04.242Z,1513233904.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:04.633Z,1513233904.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:04.690Z,1513233904.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:05.035Z,1513233905.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:05.050Z,1513233905.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:05.408Z,1513233905.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:05.433Z,1513233905.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:05.803Z,1513233905.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:05.907Z,1513233905.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:06.217Z,1513233906.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:06.274Z,1513233906.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:06.634Z,1513233906.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:06.661Z,1513233906.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:07.028Z,1513233907.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:07.047Z,1513233907.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:07.408Z,1513233907.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:07.436Z,1513233907.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:07.873Z,1513233907.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:07.929Z,1513233907.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:08.221Z,1513233908.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:08.249Z,1513233908.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:08.653Z,1513233908.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:08.672Z,1513233908.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:09.022Z,1513233909.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:09.048Z,1513233909.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:09.409Z,1513233909.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:09.424Z,1513233909.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:09.805Z,1513233909.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:09.837Z,1513233909.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:10.232Z,1513233910.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:10.252Z,1513233910.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:10.651Z,1513233910.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:10.676Z,1513233910.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:11.030Z,1513233911.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:11.051Z,1513233911.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:11.417Z,1513233911.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:11.434Z,1513233911.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:11.812Z,1513233911.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:11.835Z,1513233911.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:12.213Z,1513233912.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:12.235Z,1513233912.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:12.644Z,1513233912.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:12.667Z,1513233912.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:13.032Z,1513233913.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:13.047Z,1513233913.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:13.408Z,1513233913.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:13.440Z,1513233913.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:13.803Z,1513233913.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:13.835Z,1513233913.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:14.226Z,1513233914.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:14.302Z,1513233914.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:14.650Z,1513233914.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:14.699Z,1513233914.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:15.022Z,1513233915.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:15.048Z,1513233915.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:15.410Z,1513233915.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:15.425Z,1513233915.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:15.808Z,1513233915.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:15.824Z,1513233915.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:16.226Z,1513233916.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:16.249Z,1513233916.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:19.817Z,1513233919.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:19.899Z,1513233919.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:20.010Z,1513233920.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:20.026Z,1513233920.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:20.351Z,1513233920.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:20.413Z,1513233920.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:20.765Z,1513233920.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:20.812Z,1513233920.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:21.155Z,1513233921.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:21.207Z,1513233921.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:21.568Z,1513233921.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:21.598Z,1513233921.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:21.968Z,1513233921.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:22.014Z,1513233922.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:22.364Z,1513233922.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:22.380Z,1513233922.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:22.762Z,1513233922.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:22.776Z,1513233922.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:23.154Z,1513233923.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:23.196Z,1513233923.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:23.553Z,1513233923.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:23.587Z,1513233923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:23.949Z,1513233923.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:23.987Z,1513233923.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:24.378Z,1513233924.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:24.400Z,1513233924.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:24.780Z,1513233924.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:24.794Z,1513233924.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:25.172Z,1513233925.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:25.220Z,1513233925.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:25.551Z,1513233925.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:25.578Z,1513233925.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:25.942Z,1513233925.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:25.970Z,1513233925.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:26.347Z,1513233926.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:26.384Z,1513233926.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:26.757Z,1513233926.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:26.782Z,1513233926.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:27.163Z,1513233927.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:27.204Z,1513233927.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:27.572Z,1513233927.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:27.596Z,1513233927.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:27.989Z,1513233927.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:28.003Z,1513233928.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:28.359Z,1513233928.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:28.402Z,1513233928.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:28.764Z,1513233928.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:28.831Z,1513233928.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:29.156Z,1513233929.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:29.191Z,1513233929.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:29.555Z,1513233929.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:29.605Z,1513233929.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:29.952Z,1513233929.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:29.987Z,1513233929.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:30.376Z,1513233930.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:30.397Z,1513233930.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:30.767Z,1513233930.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:30.801Z,1513233930.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:31.158Z,1513233931.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:31.199Z,1513233931.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:31.556Z,1513233931.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:31.570Z,1513233931.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:31.946Z,1513233931.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:31.960Z,1513233931.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:32.353Z,1513233932.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:32.368Z,1513233932.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:32.754Z,1513233932.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:32.792Z,1513233932.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:33.170Z,1513233933.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:33.202Z,1513233933.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:33.573Z,1513233933.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:33.590Z,1513233933.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:33.973Z,1513233933.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:34.055Z,1513233934.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:34.362Z,1513233934.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:34.391Z,1513233934.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:34.771Z,1513233934.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:34.791Z,1513233934.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:35.165Z,1513233935.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:35.202Z,1513233935.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:35.549Z,1513233935.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:35.571Z,1513233935.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:35.950Z,1513233935.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:35.964Z,1513233935.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:36.403Z,1513233936.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:36.454Z,1513233936.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:36.770Z,1513233936.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:36.807Z,1513233936.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:37.162Z,1513233937.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:37.193Z,1513233937.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:37.556Z,1513233937.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:37.574Z,1513233937.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:37.955Z,1513233937.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:37.983Z,1513233937.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:38.361Z,1513233938.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:38.376Z,1513233938.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:38.762Z,1513233938.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:38.777Z,1513233938.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:39.166Z,1513233939.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:39.189Z,1513233939.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:39.575Z,1513233939.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:39.622Z,1513233939.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:39.973Z,1513233939.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:39.989Z,1513233939.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:40.370Z,1513233940.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:40.394Z,1513233940.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:40.791Z,1513233940.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:40.806Z,1513233940.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:41.160Z,1513233941.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:41.211Z,1513233941.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:41.550Z,1513233941.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:41.610Z,1513233941.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:41.955Z,1513233941.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:42.019Z,1513233942.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:42.362Z,1513233942.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:42.397Z,1513233942.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:42.793Z,1513233942.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:42.859Z,1513233942.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:43.179Z,1513233943.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:43.212Z,1513233943.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:43.556Z,1513233943.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:43.607Z,1513233943.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:43.958Z,1513233943.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:43.980Z,1513233943.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:44.358Z,1513233944.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:44.372Z,1513233944.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:44.761Z,1513233944.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:44.775Z,1513233944.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:45.166Z,1513233945.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:45.188Z,1513233945.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:45.565Z,1513233945.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:45.588Z,1513233945.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:46.016Z,1513233946.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:46.060Z,1513233946.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:46.366Z,1513233946.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:46.408Z,1513233946.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:46.758Z,1513233946.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:46.772Z,1513233946.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:47.157Z,1513233947.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:47.182Z,1513233947.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:47.561Z,1513233947.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:47.576Z,1513233947.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:47.956Z,1513233947.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:47.970Z,1513233947.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:48.365Z,1513233948.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:48.403Z,1513233948.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:48.762Z,1513233948.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:48.794Z,1513233948.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:49.187Z,1513233949.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:49.226Z,1513233949.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:49.555Z,1513233949.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:49.575Z,1513233949.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:49.949Z,1513233949.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:49.964Z,1513233949.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:50.355Z,1513233950.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:50.383Z,1513233950.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:50.758Z,1513233950.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:50.772Z,1513233950.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:51.166Z,1513233951.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:51.181Z,1513233951.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:51.565Z,1513233951.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:51.592Z,1513233951.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:51.966Z,1513233951.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:52.012Z,1513233952.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:52.382Z,1513233952.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:52.419Z,1513233952.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:52.756Z,1513233952.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:52.775Z,1513233952.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:53.161Z,1513233953.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:53.190Z,1513233953.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:53.562Z,1513233953.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:53.584Z,1513233953.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:53.959Z,1513233953.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:53.979Z,1513233953.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:54.367Z,1513233954.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:54.382Z,1513233954.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:54.765Z,1513233954.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:54.789Z,1513233954.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:55.165Z,1513233955.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:55.188Z,1513233955.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:55.562Z,1513233955.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:55.620Z,1513233955.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:55.958Z,1513233955.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:55.973Z,1513233955.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:56.358Z,1513233956.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:56.376Z,1513233956.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:56.748Z,1513233956.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:56.788Z,1513233956.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:57.159Z,1513233957.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:57.177Z,1513233957.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:57.562Z,1513233957.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:57.585Z,1513233957.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:57.975Z,1513233957.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:57.996Z,1513233957.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:58.354Z,1513233958.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:58.397Z,1513233958.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:58.752Z,1513233958.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:58.783Z,1513233958.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:59.147Z,1513233959.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:59.197Z,1513233959.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:59.553Z,1513233959.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:59.595Z,1513233959.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:45:59.952Z,1513233959.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:45:59.967Z,1513233959.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:00.369Z,1513233960.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:00.401Z,1513233960.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:00.759Z,1513233960.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:00.798Z,1513233960.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:01.170Z,1513233961.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:01.204Z,1513233961.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:01.561Z,1513233961.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:01.602Z,1513233961.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:01.959Z,1513233961.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:01.976Z,1513233961.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:02.364Z,1513233962.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:02.379Z,1513233962.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:02.758Z,1513233962.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:02.774Z,1513233962.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:03.159Z,1513233963.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:03.182Z,1513233963.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:03.563Z,1513233963.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:03.630Z,1513233963.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:03.971Z,1513233963.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:04.034Z,1513233964.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:04.367Z,1513233964.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:04.391Z,1513233964.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:04.756Z,1513233964.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:04.812Z,1513233964.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:05.170Z,1513233965.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:05.214Z,1513233965.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:05.549Z,1513233965.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:05.605Z,1513233965.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:05.951Z,1513233965.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:05.990Z,1513233965.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:06.362Z,1513233966.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:06.399Z,1513233966.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:06.765Z,1513233966.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:06.813Z,1513233966.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:07.166Z,1513233967.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:07.200Z,1513233967.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:07.554Z,1513233967.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:07.581Z,1513233967.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:07.946Z,1513233967.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:07.961Z,1513233967.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:08.398Z,1513233968.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:08.442Z,1513233968.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:08.754Z,1513233968.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:08.802Z,1513233968.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:09.166Z,1513233969.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:09.200Z,1513233969.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:09.571Z,1513233969.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:09.604Z,1513233969.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:09.965Z,1513233969.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:09.995Z,1513233969.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:10.348Z,1513233970.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:10.369Z,1513233970.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:10.758Z,1513233970.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:10.772Z,1513233970.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:11.152Z,1513233971.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:11.187Z,1513233971.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:11.187Z,1513233971.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125
2017-12-14T06:46:11.187Z,1513233971.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:46:11.189Z,1513233971.189 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:11.189Z,1513233971.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 125
2017-12-14T06:46:11.189Z,1513233971.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:46:11.194Z,1513233971.194 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:11.194Z,1513233971.194 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2017-12-14T06:46:11.194Z,1513233971.194 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:46:11.232Z,1513233971.232 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:46:11.232Z,1513233971.232 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:46:11.233Z,1513233971.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:46:11.562Z,1513233971.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:11.659Z,1513233971.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:46:11.659Z,1513233971.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125
2017-12-14T06:46:11.660Z,1513233971.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:46:11.660Z,1513233971.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 125
2017-12-14T06:46:11.660Z,1513233971.660 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:46:11.660Z,1513233971.660 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2017-12-14T06:46:11.971Z,1513233971.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:11.994Z,1513233971.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:46:11.995Z,1513233971.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:46:11.996Z,1513233971.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:46:11.996Z,1513233971.996 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:46:12.025Z,1513233972.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:46:12.026Z,1513233972.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:46:12.026Z,1513233972.026 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:46:12.026Z,1513233972.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:46:12.027Z,1513233972.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:46:12.371Z,1513233972.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:12.392Z,1513233972.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:12.761Z,1513233972.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:12.788Z,1513233972.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:13.169Z,1513233973.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:13.216Z,1513233973.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:13.548Z,1513233973.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:13.574Z,1513233973.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:13.944Z,1513233973.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:14.006Z,1513233974.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:14.368Z,1513233974.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:14.389Z,1513233974.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:14.811Z,1513233974.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:14.848Z,1513233974.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:15.172Z,1513233975.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:15.218Z,1513233975.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:15.547Z,1513233975.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:15.574Z,1513233975.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:15.948Z,1513233975.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:15.983Z,1513233975.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:16.353Z,1513233976.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:16.385Z,1513233976.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:21.326Z,1513233981.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:21.406Z,1513233981.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:21.555Z,1513233981.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:21.616Z,1513233981.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:21.968Z,1513233981.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:22.039Z,1513233982.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:22.360Z,1513233982.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:22.390Z,1513233982.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:22.783Z,1513233982.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:22.844Z,1513233982.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:23.155Z,1513233983.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:23.218Z,1513233983.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:23.542Z,1513233983.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:23.576Z,1513233983.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:23.932Z,1513233983.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:23.967Z,1513233983.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:24.360Z,1513233984.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:24.424Z,1513233984.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:24.760Z,1513233984.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:24.815Z,1513233984.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:25.168Z,1513233985.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:25.240Z,1513233985.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:25.533Z,1513233985.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:25.598Z,1513233985.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:25.934Z,1513233985.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:25.970Z,1513233985.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:26.376Z,1513233986.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:26.491Z,1513233986.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:26.747Z,1513233986.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:26.848Z,1513233986.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:27.158Z,1513233987.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:27.210Z,1513233987.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:27.555Z,1513233987.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:27.651Z,1513233987.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:27.948Z,1513233987.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:28.082Z,1513233988.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:28.362Z,1513233988.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:28.443Z,1513233988.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:28.742Z,1513233988.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:28.812Z,1513233988.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:29.133Z,1513233989.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:29.180Z,1513233989.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:29.543Z,1513233989.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:29.594Z,1513233989.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:29.943Z,1513233989.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:30.008Z,1513233990.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:30.398Z,1513233990.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:30.457Z,1513233990.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:30.758Z,1513233990.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:30.817Z,1513233990.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:31.152Z,1513233991.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:31.183Z,1513233991.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:31.532Z,1513233991.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:31.575Z,1513233991.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:31.932Z,1513233991.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:31.991Z,1513233991.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:32.336Z,1513233992.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:32.394Z,1513233992.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:32.738Z,1513233992.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:32.754Z,1513233992.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:33.156Z,1513233993.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:33.193Z,1513233993.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:33.550Z,1513233993.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:33.581Z,1513233993.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:33.984Z,1513233993.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:34.004Z,1513233994.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:34.348Z,1513233994.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:34.396Z,1513233994.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:34.741Z,1513233994.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:34.771Z,1513233994.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:35.164Z,1513233995.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:35.209Z,1513233995.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:35.531Z,1513233995.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:35.584Z,1513233995.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:35.926Z,1513233995.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:35.956Z,1513233995.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:36.385Z,1513233996.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:36.410Z,1513233996.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:36.776Z,1513233996.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:36.827Z,1513233996.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:37.154Z,1513233997.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:37.187Z,1513233997.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:37.538Z,1513233997.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:37.575Z,1513233997.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:37.936Z,1513233997.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:37.990Z,1513233997.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:38.344Z,1513233998.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:38.394Z,1513233998.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:38.756Z,1513233998.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:38.822Z,1513233998.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:39.154Z,1513233999.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:39.200Z,1513233999.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:39.543Z,1513233999.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:39.591Z,1513233999.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:40.027Z,1513234000.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:40.055Z,1513234000.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:40.348Z,1513234000.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:40.419Z,1513234000.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:40.783Z,1513234000.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:40.847Z,1513234000.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:41.147Z,1513234001.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:41.175Z,1513234001.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:41.402Z,1513234001.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:41.534Z,1513234001.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:41.586Z,1513234001.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:41.959Z,1513234001.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:42.048Z,1513234002.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:42.198Z,1513234002.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:42.365Z,1513234002.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:42.413Z,1513234002.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:42.747Z,1513234002.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:42.798Z,1513234002.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:43.144Z,1513234003.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:43.190Z,1513234003.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:43.550Z,1513234003.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:43.579Z,1513234003.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:43.942Z,1513234003.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:43.994Z,1513234003.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:44.339Z,1513234004.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:44.390Z,1513234004.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:44.741Z,1513234004.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:44.823Z,1513234004.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:45.177Z,1513234005.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:45.212Z,1513234005.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:45.548Z,1513234005.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:45.600Z,1513234005.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:45.951Z,1513234005.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:46.013Z,1513234006.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:46.376Z,1513234006.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:46.416Z,1513234006.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:46.744Z,1513234006.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:46.779Z,1513234006.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:47.158Z,1513234007.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:47.186Z,1513234007.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:47.534Z,1513234007.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:47.609Z,1513234007.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:47.933Z,1513234007.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:47.980Z,1513234007.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:48.344Z,1513234008.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:48.439Z,1513234008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:48.759Z,1513234008.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:48.834Z,1513234008.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:49.149Z,1513234009.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:49.191Z,1513234009.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:49.531Z,1513234009.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:49.583Z,1513234009.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:49.932Z,1513234009.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:49.963Z,1513234009.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:50.329Z,1513234010.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:50.379Z,1513234010.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:50.731Z,1513234010.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:50.764Z,1513234010.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:51.131Z,1513234011.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:51.163Z,1513234011.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:51.555Z,1513234011.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:51.571Z,1513234011.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:51.957Z,1513234011.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:52.011Z,1513234012.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:52.344Z,1513234012.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:52.371Z,1513234012.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:52.732Z,1513234012.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:52.763Z,1513234012.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:53.137Z,1513234013.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:53.168Z,1513234013.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:53.539Z,1513234013.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:53.574Z,1513234013.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:53.929Z,1513234013.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:53.951Z,1513234013.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:54.353Z,1513234014.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:54.385Z,1513234014.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:54.753Z,1513234014.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:54.777Z,1513234014.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:55.148Z,1513234015.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:55.179Z,1513234015.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:55.540Z,1513234015.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:55.556Z,1513234015.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:55.939Z,1513234015.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:56.049Z,1513234016.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:56.329Z,1513234016.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:56.374Z,1513234016.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:56.739Z,1513234016.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:56.755Z,1513234016.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:57.185Z,1513234017.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:57.203Z,1513234017.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:57.555Z,1513234017.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:57.599Z,1513234017.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:57.953Z,1513234017.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:57.980Z,1513234017.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:58.359Z,1513234018.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:58.425Z,1513234018.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:58.738Z,1513234018.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:58.753Z,1513234018.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:59.135Z,1513234019.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:59.155Z,1513234019.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:59.538Z,1513234019.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:59.561Z,1513234019.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:46:59.943Z,1513234019.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:46:59.959Z,1513234019.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:00.345Z,1513234020.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:00.367Z,1513234020.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:00.751Z,1513234020.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:00.766Z,1513234020.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:01.148Z,1513234021.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:01.171Z,1513234021.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:01.551Z,1513234021.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:01.567Z,1513234021.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:01.950Z,1513234021.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:01.965Z,1513234021.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:02.333Z,1513234022.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:02.365Z,1513234022.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:02.741Z,1513234022.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:02.763Z,1513234022.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:03.140Z,1513234023.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:03.156Z,1513234023.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:03.554Z,1513234023.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:03.594Z,1513234023.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:03.950Z,1513234023.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:03.964Z,1513234023.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:04.350Z,1513234024.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:04.403Z,1513234024.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:04.742Z,1513234024.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:04.757Z,1513234024.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:05.139Z,1513234025.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:05.155Z,1513234025.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:05.539Z,1513234025.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:05.560Z,1513234025.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:05.939Z,1513234025.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:05.955Z,1513234025.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:06.346Z,1513234026.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:06.363Z,1513234026.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:06.747Z,1513234026.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:06.763Z,1513234026.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:07.150Z,1513234027.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:07.166Z,1513234027.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:07.583Z,1513234027.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:07.612Z,1513234027.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:07.931Z,1513234027.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:07.963Z,1513234027.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:08.371Z,1513234028.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:08.394Z,1513234028.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:08.736Z,1513234028.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:08.751Z,1513234028.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:09.138Z,1513234029.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:09.175Z,1513234029.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:09.550Z,1513234029.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:09.585Z,1513234029.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:09.953Z,1513234029.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:09.991Z,1513234029.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:10.355Z,1513234030.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:10.419Z,1513234030.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:10.793Z,1513234030.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:10.903Z,1513234030.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:11.131Z,1513234031.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:11.172Z,1513234031.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:11.536Z,1513234031.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:11.569Z,1513234031.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:11.933Z,1513234031.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:11.987Z,1513234031.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:12.357Z,1513234032.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:12.372Z,1513234032.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:12.802Z,1513234032.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:12.867Z,1513234032.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:13.154Z,1513234033.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:13.204Z,1513234033.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:13.536Z,1513234033.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:13.579Z,1513234033.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:13.929Z,1513234033.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:13.957Z,1513234033.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:14.332Z,1513234034.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:14.368Z,1513234034.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:14.732Z,1513234034.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:14.749Z,1513234034.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:15.139Z,1513234035.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:15.156Z,1513234035.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:15.547Z,1513234035.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:15.582Z,1513234035.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:15.954Z,1513234035.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:15.984Z,1513234035.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:16.391Z,1513234036.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:16.530Z,1513234036.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:16.741Z,1513234036.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:16.791Z,1513234036.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:20.186Z,1513234040.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:20.201Z,1513234040.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:20.296Z,1513234040.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:20.339Z,1513234040.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:20.695Z,1513234040.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:20.715Z,1513234040.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:21.069Z,1513234041.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:21.123Z,1513234041.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:21.469Z,1513234041.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:21.484Z,1513234041.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:21.857Z,1513234041.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:21.872Z,1513234041.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:22.257Z,1513234042.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:22.271Z,1513234042.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:22.656Z,1513234042.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:22.672Z,1513234042.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:23.054Z,1513234043.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:23.069Z,1513234043.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:23.461Z,1513234043.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:23.476Z,1513234043.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:23.871Z,1513234043.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:23.886Z,1513234043.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:24.271Z,1513234044.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:24.286Z,1513234044.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:24.654Z,1513234044.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:24.731Z,1513234044.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:25.048Z,1513234045.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:25.080Z,1513234045.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:25.453Z,1513234045.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:25.480Z,1513234045.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:25.847Z,1513234045.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:25.873Z,1513234045.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:26.266Z,1513234046.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:26.295Z,1513234046.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:26.690Z,1513234046.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:26.737Z,1513234046.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:27.063Z,1513234047.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:27.082Z,1513234047.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:27.461Z,1513234047.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:27.495Z,1513234047.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:27.855Z,1513234047.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:27.896Z,1513234047.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:28.255Z,1513234048.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:28.270Z,1513234048.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:28.660Z,1513234048.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:28.679Z,1513234048.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:29.055Z,1513234049.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:29.071Z,1513234049.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:29.473Z,1513234049.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:29.506Z,1513234049.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:29.877Z,1513234049.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:29.913Z,1513234049.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:30.261Z,1513234050.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:30.277Z,1513234050.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:30.663Z,1513234050.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:30.682Z,1513234050.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:31.064Z,1513234051.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:31.079Z,1513234051.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:31.456Z,1513234051.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:31.472Z,1513234051.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:31.856Z,1513234051.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:31.871Z,1513234051.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:32.265Z,1513234052.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:32.280Z,1513234052.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:32.668Z,1513234052.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:32.687Z,1513234052.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:33.084Z,1513234053.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:33.114Z,1513234053.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:33.448Z,1513234053.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:33.503Z,1513234053.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:33.851Z,1513234053.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:33.908Z,1513234053.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:34.247Z,1513234054.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:34.261Z,1513234054.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:34.674Z,1513234054.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:34.719Z,1513234054.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:35.064Z,1513234055.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:35.084Z,1513234055.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:35.471Z,1513234055.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:35.520Z,1513234055.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:35.873Z,1513234055.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:35.889Z,1513234055.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:36.286Z,1513234056.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:36.327Z,1513234056.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:36.647Z,1513234056.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:36.680Z,1513234056.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:37.055Z,1513234057.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:37.082Z,1513234057.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:37.449Z,1513234057.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:37.480Z,1513234057.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:37.847Z,1513234057.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:37.874Z,1513234057.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:38.262Z,1513234058.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:38.288Z,1513234058.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:38.661Z,1513234058.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:38.695Z,1513234058.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:39.061Z,1513234059.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:39.095Z,1513234059.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:39.452Z,1513234059.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:39.507Z,1513234059.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:39.856Z,1513234059.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:39.894Z,1513234059.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:40.161Z,1513234060.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:40.254Z,1513234060.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:40.285Z,1513234060.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:40.652Z,1513234060.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:40.684Z,1513234060.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:40.957Z,1513234060.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:41.054Z,1513234061.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:41.075Z,1513234061.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:41.361Z,1513234061.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:41.462Z,1513234061.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:41.477Z,1513234061.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:41.862Z,1513234061.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:41.879Z,1513234061.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:42.158Z,1513234062.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:42.262Z,1513234062.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:42.277Z,1513234062.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:42.686Z,1513234062.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:42.721Z,1513234062.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:42.953Z,1513234062.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:43.069Z,1513234063.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:43.084Z,1513234063.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:43.357Z,1513234063.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:43.459Z,1513234063.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:43.474Z,1513234063.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:43.860Z,1513234063.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:43.912Z,1513234063.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:44.153Z,1513234064.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:44.270Z,1513234064.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:44.291Z,1513234064.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:44.686Z,1513234064.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:44.716Z,1513234064.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:44.949Z,1513234064.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:45.071Z,1513234065.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:45.092Z,1513234065.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:45.353Z,1513234065.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:45.460Z,1513234065.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:45.514Z,1513234065.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:45.868Z,1513234065.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:45.900Z,1513234065.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:46.149Z,1513234066.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:46.247Z,1513234066.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:46.283Z,1513234066.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:46.649Z,1513234066.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:46.686Z,1513234066.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:46.945Z,1513234066.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:47.063Z,1513234067.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:47.080Z,1513234067.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:47.349Z,1513234067.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:47.470Z,1513234067.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:47.487Z,1513234067.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:47.875Z,1513234067.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:47.890Z,1513234067.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:48.271Z,1513234068.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:48.292Z,1513234068.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:48.703Z,1513234068.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:48.731Z,1513234068.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:49.072Z,1513234069.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:49.100Z,1513234069.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:49.447Z,1513234069.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:49.483Z,1513234069.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:49.847Z,1513234069.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:49.884Z,1513234069.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:50.257Z,1513234070.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:50.290Z,1513234070.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:50.675Z,1513234070.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:50.690Z,1513234070.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:51.071Z,1513234071.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:51.091Z,1513234071.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:51.460Z,1513234071.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:51.479Z,1513234071.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:51.855Z,1513234071.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:51.876Z,1513234071.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:52.275Z,1513234072.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:52.325Z,1513234072.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:52.653Z,1513234072.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:52.680Z,1513234072.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:53.047Z,1513234073.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:53.074Z,1513234073.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:53.467Z,1513234073.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:53.488Z,1513234073.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:53.868Z,1513234073.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:53.889Z,1513234073.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:54.162Z,1513234074.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:54.267Z,1513234074.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:54.294Z,1513234074.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:54.649Z,1513234074.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:54.684Z,1513234074.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:54.959Z,1513234074.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:55.048Z,1513234075.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:55.082Z,1513234075.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:55.365Z,1513234075.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:55.471Z,1513234075.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:55.516Z,1513234075.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:55.863Z,1513234075.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:55.940Z,1513234075.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:56.161Z,1513234076.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:56.267Z,1513234076.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:56.291Z,1513234076.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:56.681Z,1513234076.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:56.742Z,1513234076.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:56.957Z,1513234076.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:57.081Z,1513234077.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:57.096Z,1513234077.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:57.361Z,1513234077.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:57.451Z,1513234077.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:57.512Z,1513234077.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:57.854Z,1513234077.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:57.868Z,1513234077.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:58.157Z,1513234078.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:58.253Z,1513234078.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:58.267Z,1513234078.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:58.684Z,1513234078.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:58.718Z,1513234078.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:58.953Z,1513234078.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:59.056Z,1513234079.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:59.072Z,1513234079.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:59.357Z,1513234079.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:59.469Z,1513234079.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:59.497Z,1513234079.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:47:59.865Z,1513234079.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:47:59.896Z,1513234079.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:00.154Z,1513234080.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:00.261Z,1513234080.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:00.276Z,1513234080.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:00.656Z,1513234080.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:00.677Z,1513234080.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:00.949Z,1513234080.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:01.060Z,1513234081.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:01.079Z,1513234081.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:01.353Z,1513234081.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:01.452Z,1513234081.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:01.479Z,1513234081.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:01.895Z,1513234081.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:01.963Z,1513234081.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:02.149Z,1513234082.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:02.262Z,1513234082.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:02.277Z,1513234082.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:02.702Z,1513234082.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:02.723Z,1513234082.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:02.945Z,1513234082.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:03.062Z,1513234083.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:03.085Z,1513234083.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:03.349Z,1513234083.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:03.459Z,1513234083.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:03.479Z,1513234083.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:03.855Z,1513234083.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:03.871Z,1513234083.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:04.255Z,1513234084.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:04.270Z,1513234084.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:04.658Z,1513234084.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:04.672Z,1513234084.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:05.071Z,1513234085.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:05.103Z,1513234085.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:05.470Z,1513234085.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:05.485Z,1513234085.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:05.858Z,1513234085.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:05.918Z,1513234085.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:06.162Z,1513234086.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:06.269Z,1513234086.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:06.284Z,1513234086.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:06.661Z,1513234086.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:06.675Z,1513234086.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:06.958Z,1513234086.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:07.047Z,1513234087.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:07.074Z,1513234087.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:07.369Z,1513234087.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:07.448Z,1513234087.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:07.480Z,1513234087.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:07.849Z,1513234087.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:07.877Z,1513234087.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:08.165Z,1513234088.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:08.271Z,1513234088.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:08.306Z,1513234088.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:08.673Z,1513234088.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:08.700Z,1513234088.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:08.961Z,1513234088.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:09.074Z,1513234089.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:09.103Z,1513234089.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:09.365Z,1513234089.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:09.459Z,1513234089.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:09.495Z,1513234089.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:09.853Z,1513234089.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:09.868Z,1513234089.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:10.162Z,1513234090.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:10.255Z,1513234090.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:10.271Z,1513234090.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:10.655Z,1513234090.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:10.676Z,1513234090.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:10.957Z,1513234090.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:11.050Z,1513234091.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:11.069Z,1513234091.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:11.361Z,1513234091.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:11.490Z,1513234091.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:11.518Z,1513234091.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:11.871Z,1513234091.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:11.891Z,1513234091.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:12.158Z,1513234092.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:12.264Z,1513234092.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:12.284Z,1513234092.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:12.672Z,1513234092.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:12.687Z,1513234092.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:12.953Z,1513234092.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:13.048Z,1513234093.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:13.079Z,1513234093.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:13.357Z,1513234093.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:13.447Z,1513234093.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:13.482Z,1513234093.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:13.851Z,1513234093.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:13.883Z,1513234093.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:14.154Z,1513234094.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:14.270Z,1513234094.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:14.290Z,1513234094.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:14.667Z,1513234094.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:14.719Z,1513234094.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:14.949Z,1513234094.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:15.071Z,1513234095.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:15.096Z,1513234095.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:15.353Z,1513234095.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:15.459Z,1513234095.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:15.474Z,1513234095.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:15.854Z,1513234095.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:15.877Z,1513234095.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:16.150Z,1513234096.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:16.258Z,1513234096.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:16.272Z,1513234096.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:16.693Z,1513234096.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:16.738Z,1513234096.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:16.945Z,1513234096.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:17.049Z,1513234097.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:17.084Z,1513234097.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:17.349Z,1513234097.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:20.178Z,1513234100.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:20.482Z,1513234100.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:20.568Z,1513234100.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:20.675Z,1513234100.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:20.707Z,1513234100.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:20.974Z,1513234100.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:21.065Z,1513234101.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:21.094Z,1513234101.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:21.378Z,1513234101.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:21.431Z,1513234101.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:21.483Z,1513234101.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:21.827Z,1513234101.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:21.842Z,1513234101.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:22.174Z,1513234102.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:22.225Z,1513234102.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:22.281Z,1513234102.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:22.649Z,1513234102.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:22.683Z,1513234102.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:22.969Z,1513234102.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:23.031Z,1513234103.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:23.054Z,1513234103.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:23.373Z,1513234103.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:23.440Z,1513234103.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:23.463Z,1513234103.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:23.841Z,1513234103.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:23.856Z,1513234103.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:24.169Z,1513234104.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:24.258Z,1513234104.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:24.304Z,1513234104.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:24.650Z,1513234104.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:24.680Z,1513234104.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:24.965Z,1513234104.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:25.028Z,1513234105.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:25.058Z,1513234105.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:25.369Z,1513234105.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:25.427Z,1513234105.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:25.447Z,1513234105.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:25.821Z,1513234105.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:25.848Z,1513234105.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:26.165Z,1513234106.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:26.238Z,1513234106.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:26.274Z,1513234106.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:26.659Z,1513234106.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:26.679Z,1513234106.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:26.962Z,1513234106.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:27.026Z,1513234107.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:27.053Z,1513234107.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:27.365Z,1513234107.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:27.443Z,1513234107.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:27.483Z,1513234107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:27.825Z,1513234107.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:27.840Z,1513234107.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:28.162Z,1513234108.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:28.232Z,1513234108.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:28.251Z,1513234108.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:28.681Z,1513234108.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:28.724Z,1513234108.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:28.957Z,1513234108.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:29.036Z,1513234109.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:29.051Z,1513234109.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:29.361Z,1513234109.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:29.428Z,1513234109.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:29.446Z,1513234109.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:29.815Z,1513234109.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:29.851Z,1513234109.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:30.157Z,1513234110.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:30.234Z,1513234110.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:30.254Z,1513234110.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:30.717Z,1513234110.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:30.795Z,1513234110.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:30.953Z,1513234110.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:31.044Z,1513234111.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:31.059Z,1513234111.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:31.357Z,1513234111.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:31.419Z,1513234111.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:31.451Z,1513234111.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:31.815Z,1513234111.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:31.847Z,1513234111.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:32.153Z,1513234112.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:32.243Z,1513234112.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:32.258Z,1513234112.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:32.643Z,1513234112.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:32.658Z,1513234112.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:32.950Z,1513234112.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:33.028Z,1513234113.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:33.044Z,1513234113.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:33.357Z,1513234113.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:33.424Z,1513234113.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:33.451Z,1513234113.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:33.819Z,1513234113.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:33.845Z,1513234113.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:34.154Z,1513234114.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:34.251Z,1513234114.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:34.267Z,1513234114.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:34.644Z,1513234114.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:34.658Z,1513234114.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:34.950Z,1513234114.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:35.052Z,1513234115.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:35.071Z,1513234115.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:35.357Z,1513234115.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:35.415Z,1513234115.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:35.447Z,1513234115.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:35.815Z,1513234115.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:35.830Z,1513234115.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:36.153Z,1513234116.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:36.217Z,1513234116.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:36.232Z,1513234116.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:36.653Z,1513234116.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:36.671Z,1513234116.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:36.949Z,1513234116.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:37.028Z,1513234117.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:37.068Z,1513234117.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:37.353Z,1513234117.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:37.436Z,1513234117.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:37.451Z,1513234117.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:37.838Z,1513234117.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:37.853Z,1513234117.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:38.149Z,1513234118.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:38.237Z,1513234118.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:38.254Z,1513234118.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:38.642Z,1513234118.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:38.666Z,1513234118.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:38.945Z,1513234118.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:39.015Z,1513234119.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:39.042Z,1513234119.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:39.349Z,1513234119.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:39.420Z,1513234119.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:39.446Z,1513234119.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:39.820Z,1513234119.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:39.847Z,1513234119.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:40.146Z,1513234120.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:40.245Z,1513234120.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:40.268Z,1513234120.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:40.664Z,1513234120.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:40.680Z,1513234120.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:40.943Z,1513234120.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:41.044Z,1513234121.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:41.059Z,1513234121.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:41.349Z,1513234121.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:41.428Z,1513234121.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:41.455Z,1513234121.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:41.824Z,1513234121.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:41.839Z,1513234121.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:42.148Z,1513234122.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:42.223Z,1513234122.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:42.244Z,1513234122.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:42.641Z,1513234122.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:42.730Z,1513234122.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:42.941Z,1513234122.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:43.019Z,1513234123.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:43.051Z,1513234123.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:43.345Z,1513234123.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:43.454Z,1513234123.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:43.527Z,1513234123.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:43.834Z,1513234123.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:43.848Z,1513234123.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:44.141Z,1513234124.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:44.234Z,1513234124.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:44.273Z,1513234124.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:44.685Z,1513234124.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:44.714Z,1513234124.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:44.937Z,1513234124.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:45.015Z,1513234125.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:45.051Z,1513234125.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:45.341Z,1513234125.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:45.420Z,1513234125.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:45.451Z,1513234125.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:45.823Z,1513234125.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:45.850Z,1513234125.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:46.138Z,1513234126.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:46.230Z,1513234126.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:46.252Z,1513234126.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:46.656Z,1513234126.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:46.703Z,1513234126.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:46.934Z,1513234126.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:47.033Z,1513234127.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:47.054Z,1513234127.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:47.436Z,1513234127.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:47.459Z,1513234127.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:47.730Z,1513234127.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:47.816Z,1513234127.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:47.842Z,1513234127.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:48.133Z,1513234128.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:48.238Z,1513234128.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:48.252Z,1513234128.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:48.637Z,1513234128.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:48.653Z,1513234128.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:48.932Z,1513234128.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:49.038Z,1513234129.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:49.052Z,1513234129.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:49.357Z,1513234129.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:49.428Z,1513234129.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:49.443Z,1513234129.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:49.816Z,1513234129.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:49.851Z,1513234129.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:50.154Z,1513234130.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:50.243Z,1513234130.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:50.258Z,1513234130.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:50.647Z,1513234130.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:50.666Z,1513234130.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:50.949Z,1513234130.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:51.033Z,1513234131.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:51.048Z,1513234131.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:51.353Z,1513234131.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:51.416Z,1513234131.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:51.446Z,1513234131.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:51.819Z,1513234131.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:51.849Z,1513234131.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:52.150Z,1513234132.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:52.243Z,1513234132.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:52.263Z,1513234132.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:52.666Z,1513234132.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:52.752Z,1513234132.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:52.945Z,1513234132.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:53.031Z,1513234133.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:53.045Z,1513234133.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:53.349Z,1513234133.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:53.417Z,1513234133.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:53.432Z,1513234133.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:53.827Z,1513234133.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:53.851Z,1513234133.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:54.145Z,1513234134.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:54.238Z,1513234134.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:54.253Z,1513234134.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:54.654Z,1513234134.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:54.684Z,1513234134.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:54.941Z,1513234134.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:55.034Z,1513234135.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:55.074Z,1513234135.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:55.345Z,1513234135.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:55.432Z,1513234135.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:55.451Z,1513234135.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:55.816Z,1513234135.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:55.846Z,1513234135.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:56.142Z,1513234136.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:56.238Z,1513234136.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:56.259Z,1513234136.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:56.647Z,1513234136.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:56.667Z,1513234136.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:56.937Z,1513234136.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:57.055Z,1513234137.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:57.075Z,1513234137.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:57.341Z,1513234137.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:57.422Z,1513234137.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:57.457Z,1513234137.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:57.820Z,1513234137.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:57.879Z,1513234137.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:58.139Z,1513234138.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:58.219Z,1513234138.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:58.234Z,1513234138.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:58.691Z,1513234138.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:58.718Z,1513234138.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:58.933Z,1513234138.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:59.015Z,1513234139.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:59.047Z,1513234139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:59.337Z,1513234139.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:59.434Z,1513234139.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:59.453Z,1513234139.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:48:59.886Z,1513234139.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:48:59.914Z,1513234139.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:00.136Z,1513234140.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:00.227Z,1513234140.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:00.248Z,1513234140.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:00.624Z,1513234140.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:00.658Z,1513234140.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:00.931Z,1513234140.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:01.047Z,1513234141.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:01.063Z,1513234141.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:01.361Z,1513234141.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:01.420Z,1513234141.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:01.459Z,1513234141.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:01.823Z,1513234141.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:01.863Z,1513234141.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:02.157Z,1513234142.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:02.237Z,1513234142.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:02.264Z,1513234142.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:02.639Z,1513234142.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:02.663Z,1513234142.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:02.954Z,1513234142.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:03.044Z,1513234143.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:03.091Z,1513234143.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:03.357Z,1513234143.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:03.426Z,1513234143.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:03.447Z,1513234143.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:03.824Z,1513234143.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:03.843Z,1513234143.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:04.154Z,1513234144.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:04.227Z,1513234144.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:04.242Z,1513234144.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:04.634Z,1513234144.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:04.670Z,1513234144.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:04.949Z,1513234144.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:05.019Z,1513234145.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:05.090Z,1513234145.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:05.353Z,1513234145.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:05.436Z,1513234145.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:05.452Z,1513234145.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:05.837Z,1513234145.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:05.877Z,1513234145.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:06.149Z,1513234146.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:06.254Z,1513234146.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:06.278Z,1513234146.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:06.638Z,1513234146.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:06.683Z,1513234146.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:06.945Z,1513234146.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:07.015Z,1513234147.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:07.047Z,1513234147.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:07.349Z,1513234147.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:07.420Z,1513234147.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:07.446Z,1513234147.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:07.815Z,1513234147.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:07.839Z,1513234147.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:08.146Z,1513234148.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:08.238Z,1513234148.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:08.252Z,1513234148.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:08.648Z,1513234148.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:08.667Z,1513234148.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:08.696Z,1513234148.696 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:49:08.941Z,1513234148.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:09.032Z,1513234149.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:09.059Z,1513234149.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:09.345Z,1513234149.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:09.420Z,1513234149.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:09.497Z,1513234149.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:09.815Z,1513234149.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:09.840Z,1513234149.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:10.142Z,1513234150.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:10.232Z,1513234150.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:10.259Z,1513234150.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:10.657Z,1513234150.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:10.672Z,1513234150.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:10.937Z,1513234150.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:11.037Z,1513234151.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:11.067Z,1513234151.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:11.341Z,1513234151.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:11.419Z,1513234151.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:11.455Z,1513234151.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:11.820Z,1513234151.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:11.855Z,1513234151.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:12.139Z,1513234152.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:12.226Z,1513234152.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:12.249Z,1513234152.249 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:12.249Z,1513234152.249 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126
2017-12-14T06:49:12.249Z,1513234152.249 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:49:12.251Z,1513234152.251 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:12.251Z,1513234152.251 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 126
2017-12-14T06:49:12.251Z,1513234152.251 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:49:12.257Z,1513234152.257 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:12.257Z,1513234152.257 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2017-12-14T06:49:12.258Z,1513234152.258 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:49:12.282Z,1513234152.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:49:12.282Z,1513234152.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:49:12.282Z,1513234152.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:49:12.719Z,1513234152.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:12.811Z,1513234152.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:49:12.811Z,1513234152.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126
2017-12-14T06:49:12.812Z,1513234152.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:49:12.812Z,1513234152.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 126
2017-12-14T06:49:12.812Z,1513234152.812 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:49:12.812Z,1513234152.812 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2017-12-14T06:49:12.934Z,1513234152.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:13.034Z,1513234153.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:13.058Z,1513234153.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:49:13.058Z,1513234153.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:49:13.058Z,1513234153.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:49:13.059Z,1513234153.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:49:13.059Z,1513234153.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:49:13.060Z,1513234153.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:49:13.060Z,1513234153.060 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:49:13.060Z,1513234153.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:49:13.061Z,1513234153.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:49:13.337Z,1513234153.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:13.430Z,1513234153.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:13.460Z,1513234153.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:13.822Z,1513234153.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:13.838Z,1513234153.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:14.134Z,1513234154.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:14.238Z,1513234154.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:14.271Z,1513234154.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:14.629Z,1513234154.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:14.644Z,1513234154.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:14.931Z,1513234154.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:15.029Z,1513234155.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:15.088Z,1513234155.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:15.357Z,1513234155.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:15.417Z,1513234155.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:15.448Z,1513234155.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:15.820Z,1513234155.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:15.852Z,1513234155.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:16.154Z,1513234156.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:16.226Z,1513234156.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:16.259Z,1513234156.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:16.262Z,1513234156.262 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:49:16.263Z,1513234156.263 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:49:16.263Z,1513234156.263 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:49:16.263Z,1513234156.263 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:49:16.642Z,1513234156.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:16.659Z,1513234156.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:16.662Z,1513234156.662 [Default:CheckIn:D] Stopped
2017-12-14T06:49:16.663Z,1513234156.663 [Default:CheckIn:E] Running Loop=1
2017-12-14T06:49:16.950Z,1513234156.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:17.050Z,1513234157.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:17.067Z,1513234157.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:17.072Z,1513234157.072 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 376.021191 min 
2017-12-14T06:49:17.072Z,1513234157.072 [Default:CheckIn:E] Stopped
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn] Stopped
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn](INFO): Running loop #37
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn] Running Loop=37
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T06:49:17.073Z,1513234157.073 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T06:49:17.357Z,1513234157.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:17.418Z,1513234157.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:17.451Z,1513234157.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:18.154Z,1513234158.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:18.950Z,1513234158.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:19.353Z,1513234159.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:20.150Z,1513234160.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:20.949Z,1513234160.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:20.992Z,1513234160.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:21.050Z,1513234161.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:21.144Z,1513234161.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:21.199Z,1513234161.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:21.354Z,1513234161.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:21.522Z,1513234161.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:21.549Z,1513234161.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:21.943Z,1513234161.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:21.959Z,1513234161.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:22.149Z,1513234162.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:22.319Z,1513234162.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:22.351Z,1513234162.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:22.714Z,1513234162.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:22.730Z,1513234162.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:22.945Z,1513234162.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:23.116Z,1513234163.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:23.135Z,1513234163.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:23.349Z,1513234163.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:23.516Z,1513234163.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:23.532Z,1513234163.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:23.912Z,1513234163.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:23.927Z,1513234163.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:24.147Z,1513234164.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:24.325Z,1513234164.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:24.359Z,1513234164.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:24.729Z,1513234164.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:24.762Z,1513234164.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:24.943Z,1513234164.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:25.129Z,1513234165.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:25.163Z,1513234165.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:25.349Z,1513234165.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:25.514Z,1513234165.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:25.537Z,1513234165.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:25.913Z,1513234165.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:25.987Z,1513234165.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:26.146Z,1513234166.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:26.307Z,1513234166.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:26.338Z,1513234166.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:26.708Z,1513234166.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:26.733Z,1513234166.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:26.941Z,1513234166.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:27.107Z,1513234167.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:27.175Z,1513234167.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:27.345Z,1513234167.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:27.531Z,1513234167.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:27.546Z,1513234167.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:27.931Z,1513234167.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:27.984Z,1513234167.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:28.142Z,1513234168.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:28.329Z,1513234168.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:28.351Z,1513234168.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:28.709Z,1513234168.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:28.743Z,1513234168.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:28.939Z,1513234168.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:29.107Z,1513234169.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:29.144Z,1513234169.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:29.353Z,1513234169.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:29.512Z,1513234169.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:29.548Z,1513234169.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:29.908Z,1513234169.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:29.961Z,1513234169.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:30.149Z,1513234170.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:30.332Z,1513234170.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:30.347Z,1513234170.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:30.731Z,1513234170.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:30.751Z,1513234170.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:30.946Z,1513234170.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:31.118Z,1513234171.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:31.132Z,1513234171.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:31.357Z,1513234171.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:31.516Z,1513234171.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:31.530Z,1513234171.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:31.929Z,1513234171.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:31.973Z,1513234171.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:32.154Z,1513234172.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:32.317Z,1513234172.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:32.331Z,1513234172.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:32.716Z,1513234172.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:32.739Z,1513234172.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:32.949Z,1513234172.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:33.115Z,1513234173.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:33.130Z,1513234173.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:33.354Z,1513234173.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:33.521Z,1513234173.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:33.536Z,1513234173.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:33.922Z,1513234173.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:33.943Z,1513234173.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:34.151Z,1513234174.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:34.318Z,1513234174.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:34.340Z,1513234174.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:34.717Z,1513234174.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:34.732Z,1513234174.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:34.945Z,1513234174.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:35.162Z,1513234175.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:35.227Z,1513234175.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:35.349Z,1513234175.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:35.520Z,1513234175.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:35.535Z,1513234175.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:35.915Z,1513234175.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:36.016Z,1513234176.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:36.145Z,1513234176.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:36.321Z,1513234176.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:36.367Z,1513234176.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:36.721Z,1513234176.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:36.743Z,1513234176.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:36.945Z,1513234176.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:37.142Z,1513234177.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:37.187Z,1513234177.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:37.369Z,1513234177.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:37.521Z,1513234177.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:37.536Z,1513234177.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:37.920Z,1513234177.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:37.947Z,1513234177.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:38.166Z,1513234178.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:38.337Z,1513234178.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:38.386Z,1513234178.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:38.707Z,1513234178.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:38.735Z,1513234178.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:38.962Z,1513234178.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:39.118Z,1513234179.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:39.138Z,1513234179.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:39.365Z,1513234179.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:39.534Z,1513234179.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:39.550Z,1513234179.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:39.930Z,1513234179.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:39.949Z,1513234179.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:40.162Z,1513234180.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:40.317Z,1513234180.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:40.344Z,1513234180.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:40.722Z,1513234180.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:40.755Z,1513234180.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:40.957Z,1513234180.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:41.119Z,1513234181.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:41.150Z,1513234181.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:41.361Z,1513234181.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:41.532Z,1513234181.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:41.562Z,1513234181.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:41.917Z,1513234181.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:41.932Z,1513234181.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:42.157Z,1513234182.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:42.330Z,1513234182.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:42.363Z,1513234182.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:42.726Z,1513234182.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:42.762Z,1513234182.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:42.954Z,1513234182.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:43.130Z,1513234183.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:43.164Z,1513234183.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:43.357Z,1513234183.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:43.520Z,1513234183.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:43.535Z,1513234183.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:43.918Z,1513234183.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:43.933Z,1513234183.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:44.154Z,1513234184.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:44.315Z,1513234184.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:44.334Z,1513234184.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:44.720Z,1513234184.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:44.817Z,1513234184.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:44.950Z,1513234184.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:45.107Z,1513234185.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:45.127Z,1513234185.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:45.373Z,1513234185.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:45.526Z,1513234185.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:45.548Z,1513234185.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:45.928Z,1513234185.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:45.963Z,1513234185.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:46.169Z,1513234186.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:46.329Z,1513234186.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:46.344Z,1513234186.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:46.717Z,1513234186.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:46.739Z,1513234186.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:46.965Z,1513234186.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:47.112Z,1513234187.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:47.194Z,1513234187.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:47.369Z,1513234187.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:47.521Z,1513234187.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:47.537Z,1513234187.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:47.907Z,1513234187.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:47.956Z,1513234187.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:48.166Z,1513234188.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:48.331Z,1513234188.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:48.346Z,1513234188.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:48.730Z,1513234188.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:48.788Z,1513234188.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:48.961Z,1513234188.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:49.122Z,1513234189.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:49.149Z,1513234189.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:49.365Z,1513234189.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:49.512Z,1513234189.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:49.539Z,1513234189.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:49.911Z,1513234189.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:49.943Z,1513234189.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:50.162Z,1513234190.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:50.323Z,1513234190.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:50.344Z,1513234190.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:50.708Z,1513234190.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:50.741Z,1513234190.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:50.957Z,1513234190.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:51.107Z,1513234191.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:51.171Z,1513234191.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:51.361Z,1513234191.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:51.535Z,1513234191.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:51.550Z,1513234191.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:51.936Z,1513234191.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:51.952Z,1513234191.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:52.157Z,1513234192.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:52.318Z,1513234192.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:52.356Z,1513234192.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:52.707Z,1513234192.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:52.742Z,1513234192.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:52.954Z,1513234192.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:53.113Z,1513234193.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:53.128Z,1513234193.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:53.357Z,1513234193.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:53.519Z,1513234193.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:53.555Z,1513234193.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:53.916Z,1513234193.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:53.930Z,1513234193.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:54.154Z,1513234194.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:54.356Z,1513234194.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:54.371Z,1513234194.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:54.728Z,1513234194.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:54.744Z,1513234194.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:54.949Z,1513234194.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:55.124Z,1513234195.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:55.139Z,1513234195.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:55.353Z,1513234195.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:55.516Z,1513234195.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:55.535Z,1513234195.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:55.904Z,1513234195.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:55.944Z,1513234195.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:56.150Z,1513234196.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:56.317Z,1513234196.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:56.331Z,1513234196.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:56.719Z,1513234196.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:56.733Z,1513234196.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:56.947Z,1513234196.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:57.131Z,1513234197.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:57.186Z,1513234197.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:57.369Z,1513234197.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:57.562Z,1513234197.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:57.583Z,1513234197.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:57.930Z,1513234197.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:57.945Z,1513234197.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:58.166Z,1513234198.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:58.332Z,1513234198.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:58.347Z,1513234198.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:58.707Z,1513234198.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:58.743Z,1513234198.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:58.962Z,1513234198.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:59.107Z,1513234199.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:59.142Z,1513234199.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:59.365Z,1513234199.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:59.508Z,1513234199.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:59.546Z,1513234199.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:49:59.910Z,1513234199.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:49:59.936Z,1513234199.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:00.162Z,1513234200.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:00.334Z,1513234200.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:00.349Z,1513234200.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:00.728Z,1513234200.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:00.756Z,1513234200.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:00.957Z,1513234200.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:01.118Z,1513234201.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:01.154Z,1513234201.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:01.361Z,1513234201.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:01.507Z,1513234201.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:01.523Z,1513234201.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:01.911Z,1513234201.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:01.950Z,1513234201.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:02.158Z,1513234202.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:02.307Z,1513234202.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:02.353Z,1513234202.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:02.708Z,1513234202.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:02.743Z,1513234202.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:02.953Z,1513234202.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:03.113Z,1513234203.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:03.128Z,1513234203.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:03.357Z,1513234203.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:03.529Z,1513234203.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:03.558Z,1513234203.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:03.933Z,1513234203.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:03.969Z,1513234203.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:04.154Z,1513234204.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:04.335Z,1513234204.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:04.367Z,1513234204.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:04.714Z,1513234204.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:04.735Z,1513234204.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:04.950Z,1513234204.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:05.111Z,1513234205.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:05.138Z,1513234205.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:05.353Z,1513234205.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:05.516Z,1513234205.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:05.535Z,1513234205.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:05.923Z,1513234205.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:05.937Z,1513234205.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:06.149Z,1513234206.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:06.326Z,1513234206.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:06.341Z,1513234206.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:06.728Z,1513234206.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:06.743Z,1513234206.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:06.945Z,1513234206.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:07.156Z,1513234207.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:07.202Z,1513234207.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:07.349Z,1513234207.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:07.507Z,1513234207.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:07.539Z,1513234207.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:07.907Z,1513234207.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:07.963Z,1513234207.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:08.146Z,1513234208.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:08.314Z,1513234208.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:08.368Z,1513234208.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:08.721Z,1513234208.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:08.756Z,1513234208.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:08.941Z,1513234208.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:09.119Z,1513234209.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:09.155Z,1513234209.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:09.345Z,1513234209.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:09.518Z,1513234209.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:09.563Z,1513234209.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:09.929Z,1513234209.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:09.962Z,1513234209.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:10.143Z,1513234210.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:10.337Z,1513234210.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:10.418Z,1513234210.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:10.715Z,1513234210.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:10.735Z,1513234210.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:10.939Z,1513234210.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:11.116Z,1513234211.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:11.135Z,1513234211.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:11.361Z,1513234211.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:11.520Z,1513234211.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:11.535Z,1513234211.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:11.915Z,1513234211.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:11.929Z,1513234211.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:12.157Z,1513234212.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:12.326Z,1513234212.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:12.341Z,1513234212.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:12.726Z,1513234212.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:12.740Z,1513234212.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:12.955Z,1513234212.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:13.126Z,1513234213.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:13.141Z,1513234213.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:13.361Z,1513234213.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:13.512Z,1513234213.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:13.567Z,1513234213.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:13.907Z,1513234213.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:13.933Z,1513234213.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:14.158Z,1513234214.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:14.311Z,1513234214.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:14.344Z,1513234214.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:14.712Z,1513234214.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:14.739Z,1513234214.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:14.953Z,1513234214.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:15.133Z,1513234215.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:15.148Z,1513234215.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:15.357Z,1513234215.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:15.526Z,1513234215.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:15.547Z,1513234215.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:15.928Z,1513234215.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:15.951Z,1513234215.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:16.153Z,1513234216.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:16.327Z,1513234216.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:16.359Z,1513234216.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:16.740Z,1513234216.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:16.799Z,1513234216.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:16.949Z,1513234216.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:17.112Z,1513234217.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:17.142Z,1513234217.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:17.353Z,1513234217.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:17.510Z,1513234217.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:17.537Z,1513234217.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:18.149Z,1513234218.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:18.945Z,1513234218.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:19.349Z,1513234219.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:20.145Z,1513234220.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:20.941Z,1513234220.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:21.255Z,1513234221.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:21.304Z,1513234221.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:21.345Z,1513234221.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:21.409Z,1513234221.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:21.441Z,1513234221.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:21.770Z,1513234221.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:21.799Z,1513234221.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:22.142Z,1513234222.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:22.169Z,1513234222.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:22.200Z,1513234222.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:22.552Z,1513234222.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:22.571Z,1513234222.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:22.937Z,1513234222.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:22.992Z,1513234222.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:23.020Z,1513234223.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:23.341Z,1513234223.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:23.374Z,1513234223.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:23.388Z,1513234223.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:23.751Z,1513234223.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:23.779Z,1513234223.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:24.140Z,1513234224.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:24.151Z,1513234224.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:24.187Z,1513234224.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:24.579Z,1513234224.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:24.594Z,1513234224.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:24.934Z,1513234224.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:24.984Z,1513234224.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:25.030Z,1513234225.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:25.375Z,1513234225.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:25.395Z,1513234225.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:25.421Z,1513234225.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:25.751Z,1513234225.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:25.800Z,1513234225.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:26.152Z,1513234226.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:26.167Z,1513234226.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:26.218Z,1513234226.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:26.556Z,1513234226.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:26.571Z,1513234226.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:26.971Z,1513234226.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:27.013Z,1513234227.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:27.022Z,1513234227.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:27.369Z,1513234227.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:27.391Z,1513234227.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:27.417Z,1513234227.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:27.769Z,1513234227.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:27.795Z,1513234227.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:28.166Z,1513234228.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:28.192Z,1513234228.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:28.214Z,1513234228.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:28.588Z,1513234228.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:28.651Z,1513234228.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:28.952Z,1513234228.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:28.966Z,1513234228.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:29.009Z,1513234229.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:29.400Z,1513234229.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:29.413Z,1513234229.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:29.445Z,1513234229.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:29.767Z,1513234229.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:29.800Z,1513234229.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:30.173Z,1513234230.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:30.204Z,1513234230.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:30.210Z,1513234230.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:30.635Z,1513234230.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:30.664Z,1513234230.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:30.970Z,1513234230.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:31.001Z,1513234231.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:31.005Z,1513234231.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:31.363Z,1513234231.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:31.401Z,1513234231.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:31.409Z,1513234231.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:31.760Z,1513234231.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:31.851Z,1513234231.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:32.155Z,1513234232.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:32.184Z,1513234232.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:32.206Z,1513234232.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:32.599Z,1513234232.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:32.694Z,1513234232.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:32.969Z,1513234232.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:32.000Z,1513234233.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:33.001Z,1513234233.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:33.374Z,1513234233.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:33.405Z,1513234233.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:33.423Z,1513234233.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:33.760Z,1513234233.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:33.775Z,1513234233.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:34.154Z,1513234234.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:34.173Z,1513234234.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:34.578Z,1513234234.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:34.627Z,1513234234.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:34.957Z,1513234234.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:34.987Z,1513234234.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:35.374Z,1513234235.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:35.395Z,1513234235.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:35.773Z,1513234235.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:35.788Z,1513234235.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:36.169Z,1513234236.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:36.191Z,1513234236.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:36.555Z,1513234236.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:36.582Z,1513234236.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:36.951Z,1513234236.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:36.983Z,1513234236.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:37.351Z,1513234237.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:37.387Z,1513234237.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:37.754Z,1513234237.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:37.789Z,1513234237.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:38.157Z,1513234238.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:38.191Z,1513234238.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:38.561Z,1513234238.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:38.599Z,1513234238.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:38.992Z,1513234238.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:39.013Z,1513234239.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:39.370Z,1513234239.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:39.392Z,1513234239.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:39.763Z,1513234239.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:39.799Z,1513234239.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:40.148Z,1513234240.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:40.164Z,1513234240.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:40.552Z,1513234240.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:40.576Z,1513234240.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:40.974Z,1513234240.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:41.016Z,1513234241.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:41.366Z,1513234241.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:41.394Z,1513234241.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:41.774Z,1513234241.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:41.823Z,1513234241.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:42.173Z,1513234242.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:42.262Z,1513234242.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:42.619Z,1513234242.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:42.650Z,1513234242.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:42.962Z,1513234242.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:43.015Z,1513234243.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:43.362Z,1513234243.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:43.377Z,1513234243.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:43.764Z,1513234243.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:43.780Z,1513234243.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:44.162Z,1513234244.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:44.179Z,1513234244.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:44.589Z,1513234244.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:44.668Z,1513234244.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:44.975Z,1513234244.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:44.990Z,1513234244.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:45.388Z,1513234245.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:45.439Z,1513234245.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:45.751Z,1513234245.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:45.779Z,1513234245.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:46.148Z,1513234246.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:46.181Z,1513234246.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:46.587Z,1513234246.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:46.644Z,1513234246.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:46.950Z,1513234246.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:46.965Z,1513234246.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:47.365Z,1513234247.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:47.395Z,1513234247.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:47.824Z,1513234247.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:47.868Z,1513234247.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:48.165Z,1513234248.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:48.195Z,1513234248.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:48.616Z,1513234248.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:48.681Z,1513234248.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:48.971Z,1513234248.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:48.987Z,1513234248.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:49.351Z,1513234249.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:49.387Z,1513234249.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:49.756Z,1513234249.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:49.782Z,1513234249.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:50.155Z,1513234250.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:50.182Z,1513234250.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:50.566Z,1513234250.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:50.590Z,1513234250.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:50.970Z,1513234250.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:50.995Z,1513234250.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:51.370Z,1513234251.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:51.395Z,1513234251.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:51.757Z,1513234251.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:51.772Z,1513234251.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:52.160Z,1513234252.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:52.175Z,1513234252.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:52.560Z,1513234252.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:52.604Z,1513234252.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:52.983Z,1513234252.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:53.051Z,1513234253.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:53.374Z,1513234253.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:53.405Z,1513234253.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:53.772Z,1513234253.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:53.803Z,1513234253.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:54.161Z,1513234254.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:54.204Z,1513234254.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:54.561Z,1513234254.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:54.575Z,1513234254.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:55.015Z,1513234255.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:55.087Z,1513234255.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:55.351Z,1513234255.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:55.387Z,1513234255.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:55.756Z,1513234255.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:55.787Z,1513234255.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:56.155Z,1513234256.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:56.186Z,1513234256.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:56.609Z,1513234256.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:56.664Z,1513234256.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:56.981Z,1513234256.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:56.995Z,1513234256.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:57.382Z,1513234257.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:57.396Z,1513234257.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:57.763Z,1513234257.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:57.791Z,1513234257.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:58.157Z,1513234258.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:58.171Z,1513234258.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:58.638Z,1513234258.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:58.662Z,1513234258.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:58.957Z,1513234258.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:58.972Z,1513234258.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:59.373Z,1513234259.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:59.398Z,1513234259.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:50:59.774Z,1513234259.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:50:59.799Z,1513234259.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:00.169Z,1513234260.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:00.199Z,1513234260.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:00.607Z,1513234260.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:00.656Z,1513234260.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:00.962Z,1513234260.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:00.977Z,1513234260.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:01.398Z,1513234261.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:01.431Z,1513234261.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:01.763Z,1513234261.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:01.778Z,1513234261.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:02.161Z,1513234262.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:02.176Z,1513234262.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:02.631Z,1513234262.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:02.663Z,1513234262.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:02.969Z,1513234262.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:02.991Z,1513234262.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:03.369Z,1513234263.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:03.422Z,1513234263.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:03.764Z,1513234263.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:03.783Z,1513234263.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:04.166Z,1513234264.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:04.181Z,1513234264.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:04.615Z,1513234264.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:04.696Z,1513234264.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:04.951Z,1513234264.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:04.987Z,1513234264.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:05.375Z,1513234265.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:05.389Z,1513234265.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:05.776Z,1513234265.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:05.791Z,1513234265.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:05.930Z,1513234265.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:06.162Z,1513234266.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:06.195Z,1513234266.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:06.560Z,1513234266.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:06.589Z,1513234266.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:06.725Z,1513234266.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:06.975Z,1513234266.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:07.006Z,1513234267.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:07.360Z,1513234267.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:07.375Z,1513234267.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:07.761Z,1513234267.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:07.776Z,1513234267.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:08.159Z,1513234268.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:08.179Z,1513234268.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:08.573Z,1513234268.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:08.604Z,1513234268.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:08.994Z,1513234268.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:09.016Z,1513234269.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:09.370Z,1513234269.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:09.407Z,1513234269.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:09.762Z,1513234269.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:09.777Z,1513234269.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:10.159Z,1513234270.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:10.174Z,1513234270.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:10.579Z,1513234270.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:10.647Z,1513234270.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:10.957Z,1513234270.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:11.019Z,1513234271.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:11.366Z,1513234271.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:11.387Z,1513234271.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:11.770Z,1513234271.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:11.785Z,1513234271.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:12.166Z,1513234272.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:12.180Z,1513234272.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:12.578Z,1513234272.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:12.632Z,1513234272.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:12.951Z,1513234272.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:12.983Z,1513234272.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:13.359Z,1513234273.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:13.386Z,1513234273.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:13.752Z,1513234273.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:13.808Z,1513234273.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:14.175Z,1513234274.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:14.255Z,1513234274.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:14.595Z,1513234274.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:14.647Z,1513234274.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:14.969Z,1513234274.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:15.011Z,1513234275.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:15.374Z,1513234275.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:15.400Z,1513234275.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:15.762Z,1513234275.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:15.814Z,1513234275.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:16.162Z,1513234276.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:16.176Z,1513234276.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:16.621Z,1513234276.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:16.652Z,1513234276.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:16.958Z,1513234276.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:16.990Z,1513234276.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:17.410Z,1513234277.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:17.425Z,1513234277.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:17.774Z,1513234277.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:17.789Z,1513234277.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:24.336Z,1513234284.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:24.394Z,1513234284.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:24.514Z,1513234284.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:24.538Z,1513234284.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:24.898Z,1513234284.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:24.954Z,1513234284.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:25.291Z,1513234285.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:25.343Z,1513234285.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:25.693Z,1513234285.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:25.712Z,1513234285.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:26.076Z,1513234286.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:26.121Z,1513234286.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:26.487Z,1513234286.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:26.623Z,1513234286.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:26.899Z,1513234286.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:26.976Z,1513234286.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:27.291Z,1513234287.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:27.320Z,1513234287.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:27.685Z,1513234287.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:27.732Z,1513234287.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:28.083Z,1513234288.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:28.103Z,1513234288.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:28.494Z,1513234288.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:28.518Z,1513234288.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:28.882Z,1513234288.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:28.896Z,1513234288.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:29.302Z,1513234289.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:29.324Z,1513234289.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:29.697Z,1513234289.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:29.722Z,1513234289.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:30.106Z,1513234290.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:30.148Z,1513234290.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:30.488Z,1513234290.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:30.608Z,1513234290.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:30.875Z,1513234290.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:30.915Z,1513234290.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:31.298Z,1513234291.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:31.324Z,1513234291.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:31.723Z,1513234291.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:31.783Z,1513234291.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:32.081Z,1513234292.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:32.134Z,1513234292.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:32.496Z,1513234292.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:32.558Z,1513234292.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:32.915Z,1513234292.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:32.954Z,1513234292.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:33.300Z,1513234293.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:33.324Z,1513234293.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:33.692Z,1513234293.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:33.791Z,1513234293.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:34.078Z,1513234294.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:34.114Z,1513234294.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:34.481Z,1513234294.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:34.511Z,1513234294.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:34.912Z,1513234294.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:35.060Z,1513234295.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:35.292Z,1513234295.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:35.327Z,1513234295.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:35.699Z,1513234295.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:35.755Z,1513234295.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:36.095Z,1513234296.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:36.135Z,1513234296.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:36.484Z,1513234296.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:36.551Z,1513234296.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:36.898Z,1513234296.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:36.985Z,1513234296.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:37.300Z,1513234297.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:37.417Z,1513234297.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:37.678Z,1513234297.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:37.708Z,1513234297.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:38.076Z,1513234298.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:38.119Z,1513234298.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:38.506Z,1513234298.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:38.586Z,1513234298.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:38.892Z,1513234298.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:38.911Z,1513234298.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:39.293Z,1513234299.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:39.335Z,1513234299.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:39.690Z,1513234299.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:39.711Z,1513234299.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:40.086Z,1513234300.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:40.109Z,1513234300.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:40.507Z,1513234300.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:40.522Z,1513234300.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:40.962Z,1513234300.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:40.996Z,1513234300.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:41.320Z,1513234301.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:41.354Z,1513234301.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:41.700Z,1513234301.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:41.739Z,1513234301.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:42.112Z,1513234302.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:42.151Z,1513234302.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:42.486Z,1513234302.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:42.517Z,1513234302.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:42.896Z,1513234302.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:42.960Z,1513234302.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:43.281Z,1513234303.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:43.319Z,1513234303.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:43.681Z,1513234303.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:43.753Z,1513234303.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:44.095Z,1513234304.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:44.109Z,1513234304.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:44.517Z,1513234304.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:44.536Z,1513234304.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:44.899Z,1513234304.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:44.943Z,1513234304.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:45.293Z,1513234305.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:45.308Z,1513234305.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:45.683Z,1513234305.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:45.738Z,1513234305.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:46.090Z,1513234306.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:46.105Z,1513234306.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:46.486Z,1513234306.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:46.501Z,1513234306.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:46.886Z,1513234306.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:46.902Z,1513234306.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:47.300Z,1513234307.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:47.339Z,1513234307.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:47.698Z,1513234307.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:47.718Z,1513234307.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:48.096Z,1513234308.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:48.111Z,1513234308.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:48.489Z,1513234308.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:48.505Z,1513234308.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:48.875Z,1513234308.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:48.982Z,1513234308.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:49.282Z,1513234309.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:49.310Z,1513234309.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:49.680Z,1513234309.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:49.695Z,1513234309.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:50.083Z,1513234310.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:50.097Z,1513234310.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:50.515Z,1513234310.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:50.535Z,1513234310.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:50.928Z,1513234310.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:50.980Z,1513234310.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:51.291Z,1513234311.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:51.343Z,1513234311.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:51.685Z,1513234311.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:51.701Z,1513234311.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:52.088Z,1513234312.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:52.103Z,1513234312.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:52.486Z,1513234312.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:52.500Z,1513234312.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:52.875Z,1513234312.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:52.913Z,1513234312.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:53.300Z,1513234313.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:53.315Z,1513234313.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:53.708Z,1513234313.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:53.748Z,1513234313.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:54.100Z,1513234314.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:54.115Z,1513234314.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:54.475Z,1513234314.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:54.507Z,1513234314.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:54.875Z,1513234314.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:54.912Z,1513234314.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:55.275Z,1513234315.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:55.310Z,1513234315.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:55.681Z,1513234315.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:55.712Z,1513234315.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:56.076Z,1513234316.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:56.112Z,1513234316.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:56.501Z,1513234316.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:56.516Z,1513234316.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:56.919Z,1513234316.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:56.973Z,1513234316.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:57.286Z,1513234317.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:57.313Z,1513234317.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:57.679Z,1513234317.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:57.749Z,1513234317.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:58.076Z,1513234318.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:58.091Z,1513234318.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:58.481Z,1513234318.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:58.531Z,1513234318.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:58.882Z,1513234318.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:58.918Z,1513234318.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:59.286Z,1513234319.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:59.334Z,1513234319.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:51:59.688Z,1513234319.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:51:59.702Z,1513234319.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:00.089Z,1513234320.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:00.174Z,1513234320.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:00.482Z,1513234320.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:00.503Z,1513234320.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:00.896Z,1513234320.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:00.911Z,1513234320.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:01.287Z,1513234321.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:01.302Z,1513234321.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:01.687Z,1513234321.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:01.707Z,1513234321.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:02.084Z,1513234322.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:02.099Z,1513234322.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:02.490Z,1513234322.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:02.505Z,1513234322.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:02.904Z,1513234322.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:02.979Z,1513234322.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:03.308Z,1513234323.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:03.340Z,1513234323.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:03.684Z,1513234323.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:03.699Z,1513234323.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:04.082Z,1513234324.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:04.127Z,1513234324.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:04.479Z,1513234324.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:04.503Z,1513234324.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:04.908Z,1513234324.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:04.981Z,1513234324.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:05.294Z,1513234325.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:05.320Z,1513234325.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:05.706Z,1513234325.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:05.721Z,1513234325.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:06.089Z,1513234326.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:06.115Z,1513234326.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:06.477Z,1513234326.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:06.492Z,1513234326.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:06.916Z,1513234326.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:07.059Z,1513234327.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:07.289Z,1513234327.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:07.303Z,1513234327.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:07.689Z,1513234327.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:07.746Z,1513234327.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:08.078Z,1513234328.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:08.109Z,1513234328.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:08.494Z,1513234328.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:08.508Z,1513234328.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:08.890Z,1513234328.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:08.919Z,1513234328.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:09.294Z,1513234329.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:09.322Z,1513234329.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:09.685Z,1513234329.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:09.699Z,1513234329.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:10.076Z,1513234330.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:10.123Z,1513234330.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:10.482Z,1513234330.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:10.497Z,1513234330.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:10.881Z,1513234330.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:10.896Z,1513234330.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:11.294Z,1513234331.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:11.325Z,1513234331.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:11.698Z,1513234331.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:11.731Z,1513234331.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:12.085Z,1513234332.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:12.100Z,1513234332.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:12.482Z,1513234332.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:12.498Z,1513234332.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:12.894Z,1513234332.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:12.909Z,1513234332.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:13.296Z,1513234333.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:13.319Z,1513234333.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:13.319Z,1513234333.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127
2017-12-14T06:52:13.319Z,1513234333.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:52:13.321Z,1513234333.321 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:13.321Z,1513234333.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 127
2017-12-14T06:52:13.321Z,1513234333.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:52:13.323Z,1513234333.323 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:13.323Z,1513234333.323 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2017-12-14T06:52:13.323Z,1513234333.323 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:52:13.376Z,1513234333.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:52:13.377Z,1513234333.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:52:13.377Z,1513234333.377 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:52:13.676Z,1513234333.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:13.734Z,1513234333.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:52:13.734Z,1513234333.734 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127
2017-12-14T06:52:13.734Z,1513234333.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:52:13.734Z,1513234333.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 127
2017-12-14T06:52:13.735Z,1513234333.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:52:13.735Z,1513234333.735 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2017-12-14T06:52:14.076Z,1513234334.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:14.110Z,1513234334.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:52:14.110Z,1513234334.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:52:14.111Z,1513234334.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:52:14.111Z,1513234334.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:52:14.112Z,1513234334.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:52:14.112Z,1513234334.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:52:14.112Z,1513234334.112 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:52:14.117Z,1513234334.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:52:14.117Z,1513234334.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:52:14.486Z,1513234334.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:14.515Z,1513234334.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:14.899Z,1513234334.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:14.924Z,1513234334.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:15.294Z,1513234335.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:15.322Z,1513234335.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:15.685Z,1513234335.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:15.707Z,1513234335.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:16.082Z,1513234336.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:16.097Z,1513234336.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:16.491Z,1513234336.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:16.527Z,1513234336.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:16.889Z,1513234336.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:16.983Z,1513234336.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:17.296Z,1513234337.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:17.312Z,1513234337.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:17.697Z,1513234337.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:17.712Z,1513234337.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:18.099Z,1513234338.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:18.119Z,1513234338.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:21.787Z,1513234341.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:21.876Z,1513234341.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:21.968Z,1513234341.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:22.004Z,1513234342.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:22.358Z,1513234342.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:22.395Z,1513234342.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:22.758Z,1513234342.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:22.810Z,1513234342.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:23.158Z,1513234343.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:23.179Z,1513234343.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:23.540Z,1513234343.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:23.604Z,1513234343.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:23.940Z,1513234343.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:23.982Z,1513234343.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:24.354Z,1513234344.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:24.368Z,1513234344.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:24.756Z,1513234344.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:24.775Z,1513234344.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:25.151Z,1513234345.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:25.172Z,1513234345.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:25.564Z,1513234345.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:25.586Z,1513234345.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:25.994Z,1513234345.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:26.057Z,1513234346.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:26.359Z,1513234346.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:26.406Z,1513234346.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:26.765Z,1513234346.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:26.879Z,1513234346.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:27.153Z,1513234347.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:27.179Z,1513234347.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:27.555Z,1513234347.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:27.570Z,1513234347.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:27.938Z,1513234347.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:27.965Z,1513234347.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:28.366Z,1513234348.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:28.407Z,1513234348.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:28.762Z,1513234348.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:28.785Z,1513234348.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:29.218Z,1513234349.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:29.239Z,1513234349.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:29.539Z,1513234349.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:29.575Z,1513234349.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:29.943Z,1513234349.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:29.986Z,1513234349.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:30.343Z,1513234350.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:30.377Z,1513234350.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:30.744Z,1513234350.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:30.770Z,1513234350.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:31.139Z,1513234351.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:31.175Z,1513234351.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:31.562Z,1513234351.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:31.579Z,1513234351.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:31.963Z,1513234351.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:32.011Z,1513234352.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:32.393Z,1513234352.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:32.437Z,1513234352.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:32.764Z,1513234352.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:32.798Z,1513234352.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:33.139Z,1513234353.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:33.181Z,1513234353.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:33.542Z,1513234353.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:33.580Z,1513234353.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:33.948Z,1513234353.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:33.977Z,1513234353.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:34.355Z,1513234354.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:34.391Z,1513234354.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:34.754Z,1513234354.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:34.777Z,1513234354.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:35.162Z,1513234355.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:35.193Z,1513234355.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:35.543Z,1513234355.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:35.631Z,1513234355.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:35.944Z,1513234355.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:35.960Z,1513234355.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:36.343Z,1513234356.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:36.359Z,1513234356.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:36.749Z,1513234356.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:36.764Z,1513234356.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:37.143Z,1513234357.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:37.180Z,1513234357.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:37.562Z,1513234357.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:37.601Z,1513234357.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:37.962Z,1513234357.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:38.100Z,1513234358.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:38.349Z,1513234358.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:38.364Z,1513234358.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:38.764Z,1513234358.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:38.793Z,1513234358.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:39.154Z,1513234359.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:39.168Z,1513234359.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:39.546Z,1513234359.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:39.570Z,1513234359.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:39.943Z,1513234359.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:39.958Z,1513234359.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:40.354Z,1513234360.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:40.369Z,1513234360.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:40.755Z,1513234360.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:40.770Z,1513234360.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:41.162Z,1513234361.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:41.202Z,1513234361.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:41.546Z,1513234361.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:41.577Z,1513234361.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:41.981Z,1513234361.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:42.024Z,1513234362.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:42.360Z,1513234362.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:42.403Z,1513234362.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:42.750Z,1513234362.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:42.778Z,1513234362.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:43.139Z,1513234363.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:43.186Z,1513234363.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:43.562Z,1513234363.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:43.578Z,1513234363.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:43.967Z,1513234363.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:44.031Z,1513234364.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:44.362Z,1513234364.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:44.442Z,1513234364.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:44.770Z,1513234364.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:44.789Z,1513234364.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:45.183Z,1513234365.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:45.227Z,1513234365.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:45.548Z,1513234365.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:45.600Z,1513234365.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:45.947Z,1513234365.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:45.980Z,1513234365.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:46.362Z,1513234366.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:46.426Z,1513234366.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:46.769Z,1513234366.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:46.808Z,1513234366.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:47.180Z,1513234367.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:47.236Z,1513234367.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:47.548Z,1513234367.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:47.580Z,1513234367.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:47.947Z,1513234367.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:47.990Z,1513234367.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:48.372Z,1513234368.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:48.424Z,1513234368.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:48.741Z,1513234368.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:48.782Z,1513234368.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:49.153Z,1513234369.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:49.168Z,1513234369.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:49.560Z,1513234369.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:49.597Z,1513234369.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:49.956Z,1513234369.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:49.971Z,1513234369.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:50.358Z,1513234370.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:50.373Z,1513234370.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:50.747Z,1513234370.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:50.767Z,1513234370.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:51.155Z,1513234371.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:51.178Z,1513234371.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:51.564Z,1513234371.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:51.606Z,1513234371.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:51.939Z,1513234371.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:51.967Z,1513234371.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:52.358Z,1513234372.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:52.397Z,1513234372.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:52.763Z,1513234372.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:52.787Z,1513234372.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:53.163Z,1513234373.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:53.216Z,1513234373.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:53.543Z,1513234373.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:53.570Z,1513234373.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:53.943Z,1513234373.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:53.977Z,1513234373.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:54.341Z,1513234374.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:54.378Z,1513234374.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:54.775Z,1513234374.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:54.847Z,1513234374.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:55.140Z,1513234375.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:55.179Z,1513234375.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:55.563Z,1513234375.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:55.584Z,1513234375.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:55.967Z,1513234375.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:55.987Z,1513234375.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:56.365Z,1513234376.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:56.418Z,1513234376.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:56.740Z,1513234376.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:56.780Z,1513234376.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:57.143Z,1513234377.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:57.190Z,1513234377.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:57.547Z,1513234377.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:57.563Z,1513234377.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:57.961Z,1513234377.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:58.027Z,1513234378.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:58.350Z,1513234378.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:58.365Z,1513234378.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:58.759Z,1513234378.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:58.794Z,1513234378.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:59.150Z,1513234379.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:59.173Z,1513234379.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:59.552Z,1513234379.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:59.566Z,1513234379.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:52:59.948Z,1513234379.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:52:59.967Z,1513234379.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:00.352Z,1513234380.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:00.366Z,1513234380.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:00.751Z,1513234380.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:00.769Z,1513234380.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:01.163Z,1513234381.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:01.194Z,1513234381.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:01.569Z,1513234381.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:01.584Z,1513234381.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:01.982Z,1513234381.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:01.999Z,1513234381.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:02.358Z,1513234382.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:02.387Z,1513234382.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:02.739Z,1513234382.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:02.772Z,1513234382.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:03.141Z,1513234383.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:03.176Z,1513234383.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:03.545Z,1513234383.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:03.573Z,1513234383.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:03.939Z,1513234383.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:03.980Z,1513234383.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:04.372Z,1513234384.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:04.443Z,1513234384.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:04.763Z,1513234384.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:04.778Z,1513234384.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:05.168Z,1513234385.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:05.190Z,1513234385.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:05.544Z,1513234385.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:05.583Z,1513234385.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:05.944Z,1513234385.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:05.979Z,1513234385.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:06.339Z,1513234386.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:06.370Z,1513234386.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:06.754Z,1513234386.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:06.780Z,1513234386.780 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T06:53:06.780Z,1513234386.780 [BPC1] Data Fault, FailCount= 1
2017-12-14T06:53:06.780Z,1513234386.780 [BPC1](ERROR): Data Fault
2017-12-14T06:53:06.790Z,1513234386.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:06.803Z,1513234386.803 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T06:53:07.143Z,1513234387.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:07.159Z,1513234387.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:07.562Z,1513234387.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:07.591Z,1513234387.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:07.963Z,1513234387.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:07.977Z,1513234387.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:08.011Z,1513234388.011 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:53:08.011Z,1513234388.011 [BPC1] No Fault, FailCount= 1
2017-12-14T06:53:08.363Z,1513234388.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:08.450Z,1513234388.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:08.739Z,1513234388.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:08.777Z,1513234388.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:09.154Z,1513234389.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:09.168Z,1513234389.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:09.553Z,1513234389.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:09.568Z,1513234389.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:09.940Z,1513234389.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:09.967Z,1513234389.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:10.361Z,1513234390.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:10.382Z,1513234390.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:10.764Z,1513234390.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:10.778Z,1513234390.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:11.166Z,1513234391.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:11.209Z,1513234391.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:11.543Z,1513234391.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:11.569Z,1513234391.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:11.943Z,1513234391.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:11.979Z,1513234391.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:12.340Z,1513234392.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:12.375Z,1513234392.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:12.744Z,1513234392.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:12.776Z,1513234392.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:13.142Z,1513234393.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:13.180Z,1513234393.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:13.554Z,1513234393.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:13.587Z,1513234393.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:13.994Z,1513234393.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:14.051Z,1513234394.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:14.365Z,1513234394.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:14.400Z,1513234394.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:14.744Z,1513234394.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:14.791Z,1513234394.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:15.153Z,1513234395.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:15.191Z,1513234395.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:15.542Z,1513234395.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:15.579Z,1513234395.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:15.944Z,1513234395.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:15.968Z,1513234395.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:16.350Z,1513234396.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:16.380Z,1513234396.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:16.788Z,1513234396.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:16.846Z,1513234396.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:17.205Z,1513234397.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:17.238Z,1513234397.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:17.549Z,1513234397.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:17.582Z,1513234397.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:17.945Z,1513234397.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:17.990Z,1513234397.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:18.348Z,1513234398.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:18.387Z,1513234398.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:21.810Z,1513234401.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:21.841Z,1513234401.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:21.931Z,1513234401.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:21.967Z,1513234401.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:22.310Z,1513234402.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:22.342Z,1513234402.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:22.706Z,1513234402.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:22.737Z,1513234402.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:23.110Z,1513234403.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:23.141Z,1513234403.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:23.500Z,1513234403.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:23.516Z,1513234403.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:23.895Z,1513234403.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:23.916Z,1513234403.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:24.295Z,1513234404.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:24.310Z,1513234404.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:24.698Z,1513234404.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:24.720Z,1513234404.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:25.102Z,1513234405.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:25.117Z,1513234405.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:25.508Z,1513234405.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:25.523Z,1513234405.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:25.906Z,1513234405.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:25.920Z,1513234405.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:26.305Z,1513234406.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:26.327Z,1513234406.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:26.708Z,1513234406.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:26.759Z,1513234406.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:27.101Z,1513234407.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:27.116Z,1513234407.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:27.503Z,1513234407.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:27.518Z,1513234407.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:27.892Z,1513234407.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:27.919Z,1513234407.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:28.310Z,1513234408.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:28.325Z,1513234408.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:28.707Z,1513234408.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:28.774Z,1513234408.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:29.110Z,1513234409.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:29.171Z,1513234409.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:29.502Z,1513234409.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:29.517Z,1513234409.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:29.888Z,1513234409.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:29.924Z,1513234409.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:30.288Z,1513234410.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:30.316Z,1513234410.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:30.687Z,1513234410.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:30.749Z,1513234410.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:31.088Z,1513234411.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:31.116Z,1513234411.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:31.514Z,1513234411.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:31.563Z,1513234411.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:31.910Z,1513234411.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:31.925Z,1513234411.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:32.307Z,1513234412.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:32.322Z,1513234412.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:32.689Z,1513234412.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:32.715Z,1513234412.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:33.107Z,1513234413.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:33.135Z,1513234413.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:33.492Z,1513234413.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:33.524Z,1513234413.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:33.895Z,1513234413.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:33.910Z,1513234413.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:34.302Z,1513234414.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:34.317Z,1513234414.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:34.702Z,1513234414.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:34.735Z,1513234414.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:35.118Z,1513234415.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:35.149Z,1513234415.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:35.494Z,1513234415.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:35.523Z,1513234415.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:35.899Z,1513234415.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:35.914Z,1513234415.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:36.310Z,1513234416.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:36.334Z,1513234416.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:36.696Z,1513234416.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:36.715Z,1513234416.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:37.102Z,1513234417.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:37.116Z,1513234417.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:37.470Z,1513234417.470 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T06:53:37.471Z,1513234417.471 [NAL9602] Data Fault, FailCount= 5
2017-12-14T06:53:37.471Z,1513234417.471 [NAL9602](ERROR): Data Fault
2017-12-14T06:53:37.492Z,1513234417.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:37.527Z,1513234417.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:37.557Z,1513234417.557 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T06:53:37.557Z,1513234417.557 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T06:53:37.870Z,1513234417.870 [NAL9602](INFO): Powering down
2017-12-14T06:53:37.888Z,1513234417.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:37.923Z,1513234417.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:37.935Z,1513234417.935 [CBIT](INFO): Critical error at 20171214T065337
2017-12-14T06:53:38.284Z,1513234418.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:38.319Z,1513234418.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:38.688Z,1513234418.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:38.721Z,1513234418.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:39.086Z,1513234419.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:39.115Z,1513234419.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:39.484Z,1513234419.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:39.566Z,1513234419.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:39.887Z,1513234419.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:39.939Z,1513234419.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:40.290Z,1513234420.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:40.322Z,1513234420.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:40.690Z,1513234420.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:40.725Z,1513234420.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:41.086Z,1513234421.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:41.122Z,1513234421.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:41.486Z,1513234421.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:41.521Z,1513234421.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:41.890Z,1513234421.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:41.904Z,1513234421.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:42.291Z,1513234422.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:42.326Z,1513234422.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:42.721Z,1513234422.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:42.783Z,1513234422.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:43.101Z,1513234423.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:43.129Z,1513234423.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:43.494Z,1513234423.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:43.528Z,1513234423.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:43.893Z,1513234423.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:43.925Z,1513234423.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:44.284Z,1513234424.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:44.311Z,1513234424.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:44.697Z,1513234424.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:44.711Z,1513234424.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:45.096Z,1513234425.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:45.119Z,1513234425.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:45.495Z,1513234425.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:45.509Z,1513234425.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:45.947Z,1513234425.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:46.001Z,1513234426.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:46.295Z,1513234426.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:46.309Z,1513234426.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:46.694Z,1513234426.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:46.709Z,1513234426.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:47.088Z,1513234427.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:47.123Z,1513234427.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:47.499Z,1513234427.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:47.514Z,1513234427.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:47.898Z,1513234427.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:47.914Z,1513234427.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:48.289Z,1513234428.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:48.316Z,1513234428.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:48.686Z,1513234428.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:48.726Z,1513234428.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:49.086Z,1513234429.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:49.119Z,1513234429.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:49.487Z,1513234429.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:49.514Z,1513234429.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:49.898Z,1513234429.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:49.913Z,1513234429.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:50.286Z,1513234430.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:50.323Z,1513234430.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:50.696Z,1513234430.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:50.732Z,1513234430.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:51.091Z,1513234431.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:51.126Z,1513234431.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:51.487Z,1513234431.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:51.502Z,1513234431.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:51.888Z,1513234431.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:51.947Z,1513234431.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:52.332Z,1513234432.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:52.400Z,1513234432.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:52.696Z,1513234432.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:52.718Z,1513234432.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:53.092Z,1513234433.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:53.147Z,1513234433.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:53.494Z,1513234433.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:53.516Z,1513234433.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:53.893Z,1513234433.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:53.946Z,1513234433.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:54.299Z,1513234434.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:54.317Z,1513234434.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:54.698Z,1513234434.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:54.712Z,1513234434.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:55.094Z,1513234435.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:55.109Z,1513234435.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:55.513Z,1513234435.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:55.552Z,1513234435.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:55.896Z,1513234435.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:55.915Z,1513234435.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:56.294Z,1513234436.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:56.309Z,1513234436.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:56.697Z,1513234436.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:56.803Z,1513234436.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:57.093Z,1513234437.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:57.122Z,1513234437.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:57.498Z,1513234437.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:57.513Z,1513234437.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:57.895Z,1513234437.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:57.910Z,1513234437.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:58.295Z,1513234438.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:58.315Z,1513234438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:58.720Z,1513234438.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:58.759Z,1513234438.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:59.108Z,1513234439.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:59.122Z,1513234439.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:59.498Z,1513234439.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:59.517Z,1513234439.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:53:59.899Z,1513234439.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:53:59.913Z,1513234439.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:00.283Z,1513234440.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:00.310Z,1513234440.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:00.695Z,1513234440.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:00.711Z,1513234440.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:01.096Z,1513234441.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:01.112Z,1513234441.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:01.495Z,1513234441.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:01.509Z,1513234441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:01.930Z,1513234441.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:02.007Z,1513234442.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:02.294Z,1513234442.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:02.315Z,1513234442.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:02.696Z,1513234442.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:02.711Z,1513234442.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:03.089Z,1513234443.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:03.123Z,1513234443.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:03.498Z,1513234443.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:03.514Z,1513234443.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:03.898Z,1513234443.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:03.913Z,1513234443.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:04.294Z,1513234444.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:04.315Z,1513234444.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:04.696Z,1513234444.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:04.710Z,1513234444.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:05.102Z,1513234445.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:05.116Z,1513234445.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:05.485Z,1513234445.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:05.516Z,1513234445.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:05.883Z,1513234445.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:05.915Z,1513234445.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:06.284Z,1513234446.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:06.319Z,1513234446.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:06.689Z,1513234446.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:06.722Z,1513234446.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:07.089Z,1513234447.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:07.116Z,1513234447.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:07.482Z,1513234447.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:07.505Z,1513234447.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:07.888Z,1513234447.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:07.919Z,1513234447.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:08.319Z,1513234448.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:08.350Z,1513234448.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:08.692Z,1513234448.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:08.708Z,1513234448.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:09.087Z,1513234449.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:09.120Z,1513234449.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:09.495Z,1513234449.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:09.524Z,1513234449.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:09.895Z,1513234449.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:09.930Z,1513234449.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:10.295Z,1513234450.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:10.333Z,1513234450.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:10.694Z,1513234450.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:10.733Z,1513234450.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:11.107Z,1513234451.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:11.139Z,1513234451.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:11.536Z,1513234451.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:11.581Z,1513234451.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:11.894Z,1513234451.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:11.914Z,1513234451.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:12.299Z,1513234452.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:12.315Z,1513234452.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:12.696Z,1513234452.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:12.715Z,1513234452.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:13.098Z,1513234453.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:13.125Z,1513234453.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:13.498Z,1513234453.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:13.514Z,1513234453.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:13.886Z,1513234453.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:13.951Z,1513234453.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:14.283Z,1513234454.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:14.332Z,1513234454.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:14.724Z,1513234454.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:14.767Z,1513234454.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:15.092Z,1513234455.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:15.147Z,1513234455.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:15.494Z,1513234455.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:15.509Z,1513234455.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:15.894Z,1513234455.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:15.939Z,1513234455.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:16.294Z,1513234456.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:16.308Z,1513234456.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:16.693Z,1513234456.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:16.708Z,1513234456.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:17.094Z,1513234457.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:17.115Z,1513234457.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:17.135Z,1513234457.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T06:49:17.1Z
2017-12-14T06:54:17.135Z,1513234457.135 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T06:54:17.135Z,1513234457.135 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T06:54:17.491Z,1513234457.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:17.514Z,1513234457.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:18.359Z,1513234458.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:18.374Z,1513234458.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:18.471Z,1513234458.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:18.486Z,1513234458.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:22.031Z,1513234462.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:22.046Z,1513234462.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:22.125Z,1513234462.125 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0148.lzma
2017-12-14T06:54:22.146Z,1513234462.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:22.228Z,1513234462.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:22.540Z,1513234462.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:22.554Z,1513234462.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:22.955Z,1513234462.955 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0148.lzma.bak
2017-12-14T06:54:22.956Z,1513234462.956 [DataOverHttps](INFO): SBD MOMSN=5438202
2017-12-14T06:54:23.025Z,1513234463.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:23.057Z,1513234463.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:47.854Z,1513234487.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:47.913Z,1513234487.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:48.016Z,1513234488.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:48.040Z,1513234488.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:51.653Z,1513234491.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:51.678Z,1513234491.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:51.777Z,1513234491.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:51.822Z,1513234491.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:52.132Z,1513234492.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:52.147Z,1513234492.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:52.537Z,1513234492.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:52.585Z,1513234492.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:52.986Z,1513234492.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:53.011Z,1513234493.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:53.337Z,1513234493.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:53.359Z,1513234493.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:56.918Z,1513234496.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:56.940Z,1513234496.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:57.029Z,1513234497.029 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0149.lzma
2017-12-14T06:54:57.050Z,1513234497.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:57.098Z,1513234497.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:57.399Z,1513234497.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:57.414Z,1513234497.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:57.767Z,1513234497.767 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0149.lzma.bak
2017-12-14T06:54:57.767Z,1513234497.767 [DataOverHttps](INFO): SBD MOMSN=5438205
2017-12-14T06:54:57.810Z,1513234497.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:57.838Z,1513234497.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:59.132Z,1513234499.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:59.148Z,1513234499.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:54:59.152Z,1513234499.152 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T06:54:59.152Z,1513234499.152 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T06:54:59.152Z,1513234499.152 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T06:54:59.256Z,1513234499.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:54:59.271Z,1513234499.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:02.846Z,1513234502.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:02.912Z,1513234502.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:03.012Z,1513234503.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:03.054Z,1513234503.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:03.375Z,1513234503.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:03.431Z,1513234503.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:03.779Z,1513234503.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:03.793Z,1513234503.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:04.169Z,1513234504.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:04.225Z,1513234504.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:04.579Z,1513234504.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:04.594Z,1513234504.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:04.978Z,1513234504.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:05.022Z,1513234505.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:05.378Z,1513234505.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:05.398Z,1513234505.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:05.775Z,1513234505.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:05.790Z,1513234505.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:06.178Z,1513234506.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:06.193Z,1513234506.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:06.578Z,1513234506.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:06.594Z,1513234506.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:06.978Z,1513234506.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:06.000Z,1513234507.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:07.376Z,1513234507.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:07.403Z,1513234507.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:07.780Z,1513234507.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:07.795Z,1513234507.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:08.177Z,1513234508.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:08.192Z,1513234508.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:08.610Z,1513234508.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:08.640Z,1513234508.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:08.970Z,1513234508.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:08.996Z,1513234508.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:09.371Z,1513234509.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:09.396Z,1513234509.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:09.771Z,1513234509.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:09.796Z,1513234509.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:10.168Z,1513234510.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:10.203Z,1513234510.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:10.635Z,1513234510.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:10.655Z,1513234510.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:10.970Z,1513234510.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:10.994Z,1513234510.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:11.370Z,1513234511.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:11.396Z,1513234511.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:11.771Z,1513234511.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:11.807Z,1513234511.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:12.175Z,1513234512.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:12.201Z,1513234512.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:12.619Z,1513234512.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:12.671Z,1513234512.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:12.974Z,1513234512.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:12.999Z,1513234512.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:13.371Z,1513234513.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:13.402Z,1513234513.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:13.773Z,1513234513.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:13.803Z,1513234513.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:14.171Z,1513234514.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:14.204Z,1513234514.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:14.204Z,1513234514.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128
2017-12-14T06:55:14.204Z,1513234514.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:55:14.206Z,1513234514.206 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:14.206Z,1513234514.206 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 128
2017-12-14T06:55:14.206Z,1513234514.206 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:55:14.208Z,1513234514.208 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:14.208Z,1513234514.208 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2017-12-14T06:55:14.208Z,1513234514.208 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:55:14.220Z,1513234514.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:55:14.220Z,1513234514.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:55:14.220Z,1513234514.220 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:55:14.658Z,1513234514.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:14.732Z,1513234514.732 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:55:14.732Z,1513234514.732 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128
2017-12-14T06:55:14.761Z,1513234514.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:55:14.761Z,1513234514.761 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 128
2017-12-14T06:55:14.762Z,1513234514.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:55:14.762Z,1513234514.762 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2017-12-14T06:55:14.977Z,1513234514.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:14.991Z,1513234514.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:55:14.992Z,1513234514.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:55:14.992Z,1513234514.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:55:14.992Z,1513234514.992 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:55:14.993Z,1513234514.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:55:14.993Z,1513234514.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:55:14.994Z,1513234514.994 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:55:14.994Z,1513234514.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:55:14.994Z,1513234514.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:55:15.383Z,1513234515.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:15.398Z,1513234515.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:15.777Z,1513234515.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:15.824Z,1513234515.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:16.171Z,1513234516.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:16.191Z,1513234516.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:16.581Z,1513234516.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:16.688Z,1513234516.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:16.980Z,1513234516.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:16.998Z,1513234516.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:17.379Z,1513234517.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:17.396Z,1513234517.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:17.779Z,1513234517.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:17.795Z,1513234517.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:18.177Z,1513234518.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:18.197Z,1513234518.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:18.576Z,1513234518.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:18.591Z,1513234518.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:18.981Z,1513234518.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:19.009Z,1513234519.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:19.382Z,1513234519.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:19.397Z,1513234519.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:19.782Z,1513234519.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:19.797Z,1513234519.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:20.181Z,1513234520.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:20.195Z,1513234520.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:20.583Z,1513234520.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:20.597Z,1513234520.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:21.033Z,1513234521.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:21.081Z,1513234521.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:21.379Z,1513234521.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:21.395Z,1513234521.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:21.776Z,1513234521.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:21.795Z,1513234521.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:22.187Z,1513234522.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:22.202Z,1513234522.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:22.632Z,1513234522.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:22.681Z,1513234522.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:22.983Z,1513234522.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:22.997Z,1513234522.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:23.379Z,1513234523.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:23.394Z,1513234523.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:23.776Z,1513234523.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:23.795Z,1513234523.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:24.217Z,1513234524.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:24.251Z,1513234524.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:24.621Z,1513234524.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:24.708Z,1513234524.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:24.970Z,1513234524.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:25.018Z,1513234525.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:25.374Z,1513234525.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:25.423Z,1513234525.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:25.773Z,1513234525.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:25.788Z,1513234525.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:26.167Z,1513234526.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:26.208Z,1513234526.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:26.627Z,1513234526.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:26.651Z,1513234526.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:26.970Z,1513234526.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:26.985Z,1513234526.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:27.398Z,1513234527.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:27.413Z,1513234527.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:27.770Z,1513234527.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:27.791Z,1513234527.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:28.173Z,1513234528.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:28.187Z,1513234528.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:28.637Z,1513234528.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:28.658Z,1513234528.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:28.972Z,1513234528.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:28.992Z,1513234528.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:29.374Z,1513234529.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:29.389Z,1513234529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:29.774Z,1513234529.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:29.788Z,1513234529.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:30.172Z,1513234530.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:30.187Z,1513234530.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:30.572Z,1513234530.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:30.641Z,1513234530.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:30.971Z,1513234530.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:30.985Z,1513234530.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:31.374Z,1513234531.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:31.391Z,1513234531.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:31.771Z,1513234531.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:31.786Z,1513234531.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:32.194Z,1513234532.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:32.223Z,1513234532.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:32.572Z,1513234532.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:32.591Z,1513234532.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:32.971Z,1513234532.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:32.987Z,1513234532.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:33.375Z,1513234533.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:33.389Z,1513234533.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:33.774Z,1513234533.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:33.804Z,1513234533.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:34.170Z,1513234534.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:34.185Z,1513234534.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:34.575Z,1513234534.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:34.617Z,1513234534.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:34.975Z,1513234534.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:34.995Z,1513234534.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:35.372Z,1513234535.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:35.388Z,1513234535.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:35.769Z,1513234535.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:35.783Z,1513234535.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:36.174Z,1513234536.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:36.189Z,1513234536.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:36.601Z,1513234536.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:36.665Z,1513234536.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:36.973Z,1513234536.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:36.996Z,1513234536.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:37.372Z,1513234537.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:37.391Z,1513234537.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:37.767Z,1513234537.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:37.782Z,1513234537.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:37.796Z,1513234537.796 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T06:55:37.796Z,1513234537.796 [NAL9602] No Fault, FailCount= 5
2017-12-14T06:55:38.157Z,1513234538.157 [NAL9602](INFO): Powering up NAL9602
2017-12-14T06:55:38.174Z,1513234538.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:38.188Z,1513234538.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:38.596Z,1513234538.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:38.641Z,1513234538.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:38.972Z,1513234538.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:38.987Z,1513234538.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:39.374Z,1513234539.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:39.395Z,1513234539.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:39.775Z,1513234539.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:39.795Z,1513234539.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:40.171Z,1513234540.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:40.186Z,1513234540.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:40.599Z,1513234540.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:40.616Z,1513234540.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:40.973Z,1513234540.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:40.989Z,1513234540.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:41.372Z,1513234541.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:41.387Z,1513234541.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:41.773Z,1513234541.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:41.788Z,1513234541.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:42.190Z,1513234542.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:42.211Z,1513234542.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:42.598Z,1513234542.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:42.616Z,1513234542.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:42.973Z,1513234542.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:42.988Z,1513234542.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:43.372Z,1513234543.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:43.399Z,1513234543.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:43.771Z,1513234543.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:43.803Z,1513234543.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:44.179Z,1513234544.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:44.228Z,1513234544.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:44.571Z,1513234544.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:44.636Z,1513234544.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:44.971Z,1513234544.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:44.999Z,1513234544.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:45.370Z,1513234545.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:45.395Z,1513234545.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:45.772Z,1513234545.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:45.787Z,1513234545.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:46.230Z,1513234546.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:46.296Z,1513234546.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:46.583Z,1513234546.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:46.628Z,1513234546.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:46.972Z,1513234546.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:47.004Z,1513234547.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:47.374Z,1513234547.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:47.389Z,1513234547.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:47.772Z,1513234547.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:47.811Z,1513234547.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:48.171Z,1513234548.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:48.205Z,1513234548.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:48.572Z,1513234548.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:48.631Z,1513234548.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:48.982Z,1513234548.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:49.012Z,1513234549.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:49.354Z,1513234549.354 [NAL9602](INFO): NAL9602 initialized
2017-12-14T06:55:49.374Z,1513234549.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:49.401Z,1513234549.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:49.771Z,1513234549.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:49.794Z,1513234549.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:50.186Z,1513234550.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:50.213Z,1513234550.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:50.614Z,1513234550.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:50.650Z,1513234550.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:50.994Z,1513234550.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:51.010Z,1513234551.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:51.373Z,1513234551.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:51.406Z,1513234551.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:51.772Z,1513234551.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:51.808Z,1513234551.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:52.172Z,1513234552.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:52.199Z,1513234552.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:52.628Z,1513234552.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:52.667Z,1513234552.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:52.993Z,1513234552.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:53.024Z,1513234553.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:53.390Z,1513234553.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:53.430Z,1513234553.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:53.780Z,1513234553.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:53.794Z,1513234553.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:54.174Z,1513234554.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:54.189Z,1513234554.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:54.624Z,1513234554.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:54.663Z,1513234554.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:54.971Z,1513234554.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:55.009Z,1513234555.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:55.396Z,1513234555.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:55.415Z,1513234555.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:55.796Z,1513234555.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:55.813Z,1513234555.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:56.197Z,1513234556.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:56.212Z,1513234556.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:56.643Z,1513234556.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:56.695Z,1513234556.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:56.988Z,1513234556.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:57.004Z,1513234557.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:57.396Z,1513234557.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:57.411Z,1513234557.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:57.794Z,1513234557.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:57.810Z,1513234557.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:58.193Z,1513234558.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:58.216Z,1513234558.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:58.584Z,1513234558.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:58.719Z,1513234558.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:58.982Z,1513234558.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:58.996Z,1513234558.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:59.384Z,1513234559.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:59.399Z,1513234559.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:55:59.793Z,1513234559.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:55:59.808Z,1513234559.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:01.366Z,1513234561.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:02.162Z,1513234562.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:03.287Z,1513234563.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:03.307Z,1513234563.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:03.432Z,1513234563.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:03.463Z,1513234563.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:03.787Z,1513234563.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:03.838Z,1513234563.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:04.190Z,1513234564.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:04.206Z,1513234564.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:04.635Z,1513234564.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:04.663Z,1513234564.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:04.989Z,1513234564.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:05.012Z,1513234565.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:05.397Z,1513234565.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:05.412Z,1513234565.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:05.797Z,1513234565.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:05.819Z,1513234565.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:06.200Z,1513234566.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:06.215Z,1513234566.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:06.639Z,1513234566.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:06.666Z,1513234566.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:07.005Z,1513234567.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:07.057Z,1513234567.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:07.398Z,1513234567.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:07.415Z,1513234567.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:07.801Z,1513234567.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:07.823Z,1513234567.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:08.198Z,1513234568.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:08.214Z,1513234568.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:08.635Z,1513234568.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:08.717Z,1513234568.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:08.979Z,1513234568.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:09.047Z,1513234569.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:09.394Z,1513234569.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:09.411Z,1513234569.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:09.798Z,1513234569.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:09.835Z,1513234569.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:10.212Z,1513234570.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:10.231Z,1513234570.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:10.606Z,1513234570.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:10.667Z,1513234570.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:10.984Z,1513234570.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:11.000Z,1513234571.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:11.398Z,1513234571.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:11.429Z,1513234571.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:11.796Z,1513234571.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:11.811Z,1513234571.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:12.211Z,1513234572.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:12.235Z,1513234572.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:12.586Z,1513234572.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:12.671Z,1513234572.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:12.975Z,1513234572.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:13.010Z,1513234573.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:13.375Z,1513234573.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:13.412Z,1513234573.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:13.798Z,1513234573.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:13.827Z,1513234573.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:14.195Z,1513234574.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:14.226Z,1513234574.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:14.594Z,1513234574.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:14.627Z,1513234574.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:14.995Z,1513234574.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:15.030Z,1513234575.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:15.383Z,1513234575.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:15.399Z,1513234575.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:15.782Z,1513234575.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:15.796Z,1513234575.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:16.184Z,1513234576.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:16.200Z,1513234576.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:16.632Z,1513234576.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:16.656Z,1513234576.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:16.999Z,1513234576.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:17.034Z,1513234577.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:17.391Z,1513234577.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:17.405Z,1513234577.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:17.775Z,1513234577.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:17.806Z,1513234577.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:18.180Z,1513234578.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:18.208Z,1513234578.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:18.629Z,1513234578.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:18.699Z,1513234578.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:18.979Z,1513234578.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:19.015Z,1513234579.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:19.390Z,1513234579.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:19.422Z,1513234579.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:19.803Z,1513234579.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:19.827Z,1513234579.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:20.194Z,1513234580.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:20.223Z,1513234580.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:20.651Z,1513234580.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:20.699Z,1513234580.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:20.985Z,1513234580.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:21.020Z,1513234581.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:21.388Z,1513234581.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:21.412Z,1513234581.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:21.791Z,1513234581.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:21.807Z,1513234581.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:22.186Z,1513234582.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:22.218Z,1513234582.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:22.625Z,1513234582.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:22.648Z,1513234582.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:22.988Z,1513234582.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:23.035Z,1513234583.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:23.395Z,1513234583.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:23.449Z,1513234583.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:23.802Z,1513234583.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:23.844Z,1513234583.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:24.200Z,1513234584.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:24.243Z,1513234584.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:24.614Z,1513234584.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:24.641Z,1513234584.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:25.016Z,1513234585.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:25.045Z,1513234585.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:25.398Z,1513234585.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:25.437Z,1513234585.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:25.800Z,1513234585.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:25.842Z,1513234585.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:26.195Z,1513234586.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:26.231Z,1513234586.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:26.583Z,1513234586.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:26.686Z,1513234586.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:26.980Z,1513234586.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:27.015Z,1513234587.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:27.385Z,1513234587.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:27.412Z,1513234587.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:27.797Z,1513234587.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:27.816Z,1513234587.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:28.200Z,1513234588.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:28.223Z,1513234588.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:28.585Z,1513234588.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:28.619Z,1513234588.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:29.004Z,1513234589.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:29.070Z,1513234589.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:29.382Z,1513234589.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:29.406Z,1513234589.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:29.442Z,1513234589.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:29.789Z,1513234589.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:29.804Z,1513234589.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:30.200Z,1513234590.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:30.238Z,1513234590.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:30.241Z,1513234590.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:30.590Z,1513234590.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:30.671Z,1513234590.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:31.019Z,1513234591.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:31.044Z,1513234591.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:31.394Z,1513234591.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:31.448Z,1513234591.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:31.804Z,1513234591.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:31.824Z,1513234591.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:32.176Z,1513234592.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:32.256Z,1513234592.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:32.662Z,1513234592.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:32.721Z,1513234592.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:32.978Z,1513234592.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:33.035Z,1513234593.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:33.406Z,1513234593.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:33.459Z,1513234593.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:33.802Z,1513234593.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:33.831Z,1513234593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:34.187Z,1513234594.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:34.219Z,1513234594.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:34.650Z,1513234594.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:34.711Z,1513234594.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:34.976Z,1513234594.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:35.034Z,1513234595.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:35.387Z,1513234595.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:35.427Z,1513234595.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:35.795Z,1513234595.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:35.824Z,1513234595.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:36.190Z,1513234596.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:36.240Z,1513234596.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:36.629Z,1513234596.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:36.695Z,1513234596.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:36.978Z,1513234596.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:37.050Z,1513234597.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:37.388Z,1513234597.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:37.427Z,1513234597.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:37.800Z,1513234597.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:37.860Z,1513234597.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:38.187Z,1513234598.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:38.216Z,1513234598.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:38.625Z,1513234598.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:38.762Z,1513234598.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:38.982Z,1513234598.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:39.058Z,1513234599.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:39.388Z,1513234599.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:39.466Z,1513234599.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:39.796Z,1513234599.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:39.895Z,1513234599.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:40.188Z,1513234600.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:40.223Z,1513234600.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:40.600Z,1513234600.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:40.710Z,1513234600.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:40.987Z,1513234600.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:41.015Z,1513234601.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:41.396Z,1513234601.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:41.452Z,1513234601.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:41.808Z,1513234601.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:41.828Z,1513234601.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:42.201Z,1513234602.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:42.262Z,1513234602.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:42.582Z,1513234602.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:42.622Z,1513234602.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:42.998Z,1513234602.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:43.031Z,1513234603.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:43.381Z,1513234603.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:43.435Z,1513234603.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:43.810Z,1513234603.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:43.835Z,1513234603.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:44.200Z,1513234604.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:44.241Z,1513234604.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:44.639Z,1513234604.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:44.708Z,1513234604.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:44.984Z,1513234604.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:45.027Z,1513234605.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:45.386Z,1513234605.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:45.409Z,1513234605.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:45.801Z,1513234605.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:45.855Z,1513234605.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:46.175Z,1513234606.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:46.206Z,1513234606.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:46.643Z,1513234606.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:46.668Z,1513234606.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:46.998Z,1513234606.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:47.021Z,1513234607.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:47.386Z,1513234607.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:47.420Z,1513234607.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:47.779Z,1513234607.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:47.810Z,1513234607.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:48.175Z,1513234608.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:48.211Z,1513234608.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:48.635Z,1513234608.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:48.674Z,1513234608.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:48.984Z,1513234608.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:49.017Z,1513234609.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:49.395Z,1513234609.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:49.425Z,1513234609.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:49.801Z,1513234609.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:49.831Z,1513234609.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:50.198Z,1513234610.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:50.222Z,1513234610.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:50.627Z,1513234610.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:50.647Z,1513234610.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:50.979Z,1513234610.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:51.023Z,1513234611.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:51.407Z,1513234611.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:51.429Z,1513234611.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:51.789Z,1513234611.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:51.804Z,1513234611.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:52.194Z,1513234612.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:52.209Z,1513234612.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:52.672Z,1513234612.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:52.708Z,1513234612.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:52.980Z,1513234612.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:53.011Z,1513234613.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:53.390Z,1513234613.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:53.475Z,1513234613.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:53.796Z,1513234613.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:53.811Z,1513234613.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:54.199Z,1513234614.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:54.219Z,1513234614.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:54.584Z,1513234614.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:54.688Z,1513234614.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:54.980Z,1513234614.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:55.007Z,1513234615.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:55.382Z,1513234615.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:55.435Z,1513234615.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:55.793Z,1513234615.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:55.809Z,1513234615.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:56.198Z,1513234616.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:56.213Z,1513234616.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:56.597Z,1513234616.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:56.612Z,1513234616.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:56.979Z,1513234616.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:57.011Z,1513234617.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:57.377Z,1513234617.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:57.404Z,1513234617.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:57.780Z,1513234617.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:57.808Z,1513234617.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:58.169Z,1513234618.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:58.184Z,1513234618.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:58.586Z,1513234618.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:58.612Z,1513234618.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:59.025Z,1513234619.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:59.055Z,1513234619.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:59.407Z,1513234619.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:59.422Z,1513234619.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:56:59.782Z,1513234619.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:56:59.809Z,1513234619.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:03.355Z,1513234623.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:03.369Z,1513234623.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:03.467Z,1513234623.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:03.528Z,1513234623.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:03.835Z,1513234623.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:03.871Z,1513234623.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:04.237Z,1513234624.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:04.267Z,1513234624.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:04.669Z,1513234624.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:04.702Z,1513234624.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:05.023Z,1513234625.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:05.039Z,1513234625.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:05.462Z,1513234625.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:05.511Z,1513234625.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:05.888Z,1513234625.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:05.907Z,1513234625.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:06.224Z,1513234626.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:06.243Z,1513234626.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:06.640Z,1513234626.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:06.679Z,1513234626.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:07.029Z,1513234627.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:07.052Z,1513234627.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:07.434Z,1513234627.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:07.459Z,1513234627.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:07.821Z,1513234627.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:07.835Z,1513234627.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:08.216Z,1513234628.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:08.231Z,1513234628.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:08.715Z,1513234628.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:08.798Z,1513234628.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:09.015Z,1513234629.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:09.046Z,1513234629.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:09.435Z,1513234629.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:09.450Z,1513234629.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:09.847Z,1513234629.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:09.867Z,1513234629.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:10.223Z,1513234630.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:10.270Z,1513234630.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:10.615Z,1513234630.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:10.646Z,1513234630.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:11.038Z,1513234631.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:11.056Z,1513234631.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:11.358Z,1513234631.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:11.432Z,1513234631.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:11.456Z,1513234631.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:11.842Z,1513234631.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:11.857Z,1513234631.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:12.153Z,1513234632.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:12.245Z,1513234632.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:12.260Z,1513234632.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:12.621Z,1513234632.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:12.648Z,1513234632.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:13.038Z,1513234633.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:13.054Z,1513234633.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:13.432Z,1513234633.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:13.467Z,1513234633.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:13.853Z,1513234633.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:13.869Z,1513234633.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:14.227Z,1513234634.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:14.258Z,1513234634.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:14.632Z,1513234634.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:14.698Z,1513234634.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:15.016Z,1513234635.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:15.079Z,1513234635.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:15.451Z,1513234635.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:15.507Z,1513234635.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:15.838Z,1513234635.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:15.884Z,1513234635.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:16.226Z,1513234636.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:16.242Z,1513234636.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:16.629Z,1513234636.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:16.675Z,1513234636.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:17.027Z,1513234637.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:17.043Z,1513234637.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:17.429Z,1513234637.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:17.479Z,1513234637.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:17.829Z,1513234637.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:17.846Z,1513234637.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:18.237Z,1513234638.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:18.304Z,1513234638.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:18.632Z,1513234638.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:18.647Z,1513234638.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:19.024Z,1513234639.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:19.039Z,1513234639.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:19.434Z,1513234639.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:19.455Z,1513234639.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:19.834Z,1513234639.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:19.855Z,1513234639.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:20.232Z,1513234640.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:20.248Z,1513234640.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:20.635Z,1513234640.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:20.650Z,1513234640.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:21.023Z,1513234641.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:21.041Z,1513234641.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:21.442Z,1513234641.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:21.485Z,1513234641.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:21.850Z,1513234641.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:21.871Z,1513234641.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:22.240Z,1513234642.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:22.259Z,1513234642.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:22.644Z,1513234642.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:22.680Z,1513234642.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:23.024Z,1513234643.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:23.055Z,1513234643.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:23.433Z,1513234643.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:23.463Z,1513234643.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:23.837Z,1513234643.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:23.860Z,1513234643.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:24.249Z,1513234644.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:24.271Z,1513234644.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:24.650Z,1513234644.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:24.671Z,1513234644.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:25.023Z,1513234645.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:25.038Z,1513234645.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:25.437Z,1513234645.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:25.471Z,1513234645.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:25.837Z,1513234645.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:25.883Z,1513234645.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:26.233Z,1513234646.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:26.248Z,1513234646.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:26.626Z,1513234646.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:26.647Z,1513234646.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:27.022Z,1513234647.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:27.038Z,1513234647.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:27.425Z,1513234647.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:27.440Z,1513234647.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:27.852Z,1513234647.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:27.875Z,1513234647.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:28.234Z,1513234648.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:28.255Z,1513234648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:28.634Z,1513234648.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:28.648Z,1513234648.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:29.029Z,1513234649.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:29.044Z,1513234649.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:29.438Z,1513234649.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:29.453Z,1513234649.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:29.836Z,1513234649.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:29.932Z,1513234649.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:30.237Z,1513234650.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:30.252Z,1513234650.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:30.638Z,1513234650.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:30.653Z,1513234650.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:31.040Z,1513234651.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:31.087Z,1513234651.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:31.437Z,1513234651.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:31.453Z,1513234651.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:31.833Z,1513234651.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:31.855Z,1513234651.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:32.238Z,1513234652.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:32.252Z,1513234652.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:32.639Z,1513234652.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:32.685Z,1513234652.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:33.016Z,1513234653.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:33.051Z,1513234653.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:33.426Z,1513234653.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:33.538Z,1513234653.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:33.832Z,1513234653.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:33.848Z,1513234653.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:34.253Z,1513234654.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:34.286Z,1513234654.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:34.633Z,1513234654.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:34.679Z,1513234654.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:35.024Z,1513234655.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:35.051Z,1513234655.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:35.427Z,1513234655.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:35.443Z,1513234655.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:35.829Z,1513234655.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:35.867Z,1513234655.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:36.238Z,1513234656.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:36.318Z,1513234656.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:36.680Z,1513234656.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:36.723Z,1513234656.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:37.020Z,1513234657.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:37.050Z,1513234657.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:37.461Z,1513234657.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:37.480Z,1513234657.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:37.830Z,1513234657.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:37.879Z,1513234657.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:38.238Z,1513234658.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:38.273Z,1513234658.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:38.626Z,1513234658.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:38.686Z,1513234658.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:39.022Z,1513234659.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:39.045Z,1513234659.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:39.438Z,1513234659.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:39.453Z,1513234659.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:39.839Z,1513234659.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:39.895Z,1513234659.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:40.237Z,1513234660.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:40.252Z,1513234660.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:40.669Z,1513234660.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:40.738Z,1513234660.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:41.018Z,1513234661.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:41.047Z,1513234661.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:41.438Z,1513234661.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:41.452Z,1513234661.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:41.841Z,1513234661.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:41.856Z,1513234661.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:42.240Z,1513234662.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:42.254Z,1513234662.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:42.631Z,1513234662.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:42.664Z,1513234662.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:43.015Z,1513234663.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:43.047Z,1513234663.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:43.442Z,1513234663.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:43.459Z,1513234663.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:43.837Z,1513234663.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:43.868Z,1513234663.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:44.225Z,1513234664.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:44.248Z,1513234664.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:44.626Z,1513234664.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:44.667Z,1513234664.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:45.032Z,1513234665.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:45.060Z,1513234665.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:45.437Z,1513234665.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:45.472Z,1513234665.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:45.829Z,1513234665.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:45.843Z,1513234665.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:46.237Z,1513234666.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:46.268Z,1513234666.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:46.637Z,1513234666.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:46.667Z,1513234666.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:47.037Z,1513234667.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:47.068Z,1513234667.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:47.433Z,1513234667.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:47.455Z,1513234667.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:47.836Z,1513234667.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:47.851Z,1513234667.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:48.238Z,1513234668.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:48.259Z,1513234668.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:48.643Z,1513234668.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:48.663Z,1513234668.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:49.016Z,1513234669.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:49.067Z,1513234669.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:49.445Z,1513234669.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:49.459Z,1513234669.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:49.838Z,1513234669.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:49.854Z,1513234669.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:50.253Z,1513234670.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:50.299Z,1513234670.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:50.682Z,1513234670.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:50.703Z,1513234670.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:51.020Z,1513234671.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:51.052Z,1513234671.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:51.441Z,1513234671.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:51.456Z,1513234671.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:51.838Z,1513234671.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:51.863Z,1513234671.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:52.240Z,1513234672.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:52.256Z,1513234672.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:52.615Z,1513234672.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:52.646Z,1513234672.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:53.050Z,1513234673.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:53.064Z,1513234673.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:53.447Z,1513234673.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:53.495Z,1513234673.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:53.834Z,1513234673.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:53.863Z,1513234673.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:54.141Z,1513234674.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:54.246Z,1513234674.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:54.260Z,1513234674.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:54.620Z,1513234674.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:54.659Z,1513234674.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:54.938Z,1513234674.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:55.027Z,1513234675.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:55.061Z,1513234675.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:55.353Z,1513234675.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:55.437Z,1513234675.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:55.465Z,1513234675.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:55.834Z,1513234675.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:55.864Z,1513234675.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:56.238Z,1513234676.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:56.262Z,1513234676.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:56.670Z,1513234676.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:56.714Z,1513234676.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:57.027Z,1513234677.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:57.051Z,1513234677.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:57.433Z,1513234677.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:57.461Z,1513234677.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:57.837Z,1513234677.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:57.868Z,1513234677.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:58.238Z,1513234678.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:58.268Z,1513234678.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:58.641Z,1513234678.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:58.670Z,1513234678.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:59.026Z,1513234679.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:59.041Z,1513234679.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:59.430Z,1513234679.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:59.455Z,1513234679.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:57:59.856Z,1513234679.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:57:59.915Z,1513234679.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:03.350Z,1513234683.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:03.440Z,1513234683.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:03.528Z,1513234683.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:03.574Z,1513234683.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:03.907Z,1513234683.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:03.922Z,1513234683.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:04.134Z,1513234684.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:04.309Z,1513234684.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:04.324Z,1513234684.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:04.703Z,1513234684.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:04.758Z,1513234684.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:04.929Z,1513234684.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:05.102Z,1513234685.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:05.117Z,1513234685.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:05.333Z,1513234685.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:05.509Z,1513234685.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:05.559Z,1513234685.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:05.917Z,1513234685.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:05.932Z,1513234685.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:06.129Z,1513234686.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:06.315Z,1513234686.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:06.356Z,1513234686.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:06.706Z,1513234686.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:06.721Z,1513234686.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:06.927Z,1513234686.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:07.112Z,1513234687.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:07.128Z,1513234687.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:07.353Z,1513234687.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:07.503Z,1513234687.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:07.519Z,1513234687.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:07.909Z,1513234687.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:07.924Z,1513234687.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:08.149Z,1513234688.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:08.292Z,1513234688.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:08.327Z,1513234688.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:08.718Z,1513234688.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:08.732Z,1513234688.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:08.946Z,1513234688.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:09.118Z,1513234689.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:09.133Z,1513234689.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:09.405Z,1513234689.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:09.515Z,1513234689.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:09.534Z,1513234689.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:09.895Z,1513234689.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:09.932Z,1513234689.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:10.201Z,1513234690.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:10.299Z,1513234690.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:10.330Z,1513234690.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:10.696Z,1513234690.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:10.726Z,1513234690.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:10.997Z,1513234690.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:11.099Z,1513234691.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:11.136Z,1513234691.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:11.401Z,1513234691.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:11.509Z,1513234691.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:11.543Z,1513234691.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:11.922Z,1513234691.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:11.942Z,1513234691.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:12.197Z,1513234692.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:12.305Z,1513234692.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:12.339Z,1513234692.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:12.739Z,1513234692.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:12.759Z,1513234692.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:12.993Z,1513234692.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:13.105Z,1513234693.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:13.120Z,1513234693.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:13.397Z,1513234693.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:13.505Z,1513234693.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:13.520Z,1513234693.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:13.906Z,1513234693.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:13.951Z,1513234693.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:14.193Z,1513234694.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:14.294Z,1513234694.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:14.321Z,1513234694.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:14.705Z,1513234694.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:14.727Z,1513234694.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:14.989Z,1513234694.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:15.110Z,1513234695.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:15.125Z,1513234695.125 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:15.125Z,1513234695.125 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129
2017-12-14T06:58:15.125Z,1513234695.125 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T06:58:15.127Z,1513234695.127 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:15.127Z,1513234695.127 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 129
2017-12-14T06:58:15.127Z,1513234695.127 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T06:58:15.137Z,1513234695.137 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:15.137Z,1513234695.137 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2017-12-14T06:58:15.137Z,1513234695.137 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T06:58:15.158Z,1513234695.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T06:58:15.158Z,1513234695.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T06:58:15.158Z,1513234695.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T06:58:15.393Z,1513234695.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:15.510Z,1513234695.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:15.562Z,1513234695.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T06:58:15.562Z,1513234695.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129
2017-12-14T06:58:15.563Z,1513234695.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T06:58:15.563Z,1513234695.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 129
2017-12-14T06:58:15.563Z,1513234695.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T06:58:15.563Z,1513234695.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2017-12-14T06:58:15.930Z,1513234695.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:15.968Z,1513234695.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T06:58:15.969Z,1513234695.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:58:15.970Z,1513234695.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:58:15.971Z,1513234695.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T06:58:15.972Z,1513234695.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:58:15.972Z,1513234695.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:58:15.985Z,1513234695.985 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T06:58:15.985Z,1513234695.985 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T06:58:15.986Z,1513234695.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T06:58:16.189Z,1513234696.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:16.295Z,1513234696.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:16.332Z,1513234696.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:16.696Z,1513234696.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:16.730Z,1513234696.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:16.985Z,1513234696.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:17.095Z,1513234697.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:17.130Z,1513234697.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:17.389Z,1513234697.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:17.518Z,1513234697.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:17.543Z,1513234697.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:17.925Z,1513234697.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:17.940Z,1513234697.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:18.185Z,1513234698.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:18.321Z,1513234698.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:18.335Z,1513234698.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:18.726Z,1513234698.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:18.742Z,1513234698.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:18.981Z,1513234698.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:19.134Z,1513234699.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:19.179Z,1513234699.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:19.385Z,1513234699.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:19.501Z,1513234699.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:19.516Z,1513234699.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:19.904Z,1513234699.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:19.924Z,1513234699.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:20.181Z,1513234700.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:20.301Z,1513234700.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:20.328Z,1513234700.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:20.718Z,1513234700.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:20.759Z,1513234700.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:20.978Z,1513234700.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:21.126Z,1513234701.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:21.152Z,1513234701.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:21.384Z,1513234701.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:21.506Z,1513234701.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:21.521Z,1513234701.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:21.903Z,1513234701.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:21.917Z,1513234701.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:22.177Z,1513234702.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:22.319Z,1513234702.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:22.355Z,1513234702.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:22.696Z,1513234702.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:22.723Z,1513234702.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:22.974Z,1513234702.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:23.095Z,1513234703.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:23.123Z,1513234703.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:23.377Z,1513234703.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:23.518Z,1513234703.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:23.535Z,1513234703.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:23.917Z,1513234703.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:23.939Z,1513234703.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:24.173Z,1513234704.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:24.318Z,1513234704.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:24.339Z,1513234704.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:24.695Z,1513234704.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:24.727Z,1513234704.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:24.969Z,1513234704.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:25.096Z,1513234705.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:25.127Z,1513234705.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:25.373Z,1513234705.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:25.516Z,1513234705.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:25.549Z,1513234705.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:25.906Z,1513234705.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:25.963Z,1513234705.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:26.173Z,1513234706.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:26.300Z,1513234706.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:26.315Z,1513234706.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:26.717Z,1513234706.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:26.743Z,1513234706.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:26.970Z,1513234706.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:27.109Z,1513234707.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:27.124Z,1513234707.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:27.373Z,1513234707.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:27.510Z,1513234707.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:27.527Z,1513234707.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:27.895Z,1513234707.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:27.927Z,1513234707.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:28.169Z,1513234708.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:28.292Z,1513234708.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:28.308Z,1513234708.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:28.727Z,1513234708.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:28.755Z,1513234708.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:28.965Z,1513234708.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:29.115Z,1513234709.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:29.123Z,1513234709.123 [BPC1](ERROR): Failed to receive battery data
2017-12-14T06:58:29.123Z,1513234709.123 [BPC1] Communications Fault, FailCount= 1
2017-12-14T06:58:29.123Z,1513234709.123 [BPC1](ERROR): Communications Fault
2017-12-14T06:58:29.131Z,1513234709.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:29.147Z,1513234709.147 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T06:58:29.369Z,1513234709.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:29.521Z,1513234709.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:29.536Z,1513234709.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:29.928Z,1513234709.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:29.943Z,1513234709.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:30.165Z,1513234710.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:30.306Z,1513234710.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:30.334Z,1513234710.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:30.347Z,1513234710.347 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T06:58:30.347Z,1513234710.347 [BPC1] No Fault, FailCount= 1
2017-12-14T06:58:30.695Z,1513234710.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:30.779Z,1513234710.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:30.961Z,1513234710.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:31.095Z,1513234711.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:31.132Z,1513234711.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:31.365Z,1513234711.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:31.495Z,1513234711.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:31.530Z,1513234711.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:31.949Z,1513234711.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:32.027Z,1513234712.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:32.162Z,1513234712.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:32.296Z,1513234712.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:32.338Z,1513234712.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:32.706Z,1513234712.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:32.739Z,1513234712.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:32.959Z,1513234712.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:33.117Z,1513234713.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:33.147Z,1513234713.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:33.361Z,1513234713.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:33.510Z,1513234713.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:33.544Z,1513234713.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:33.895Z,1513234713.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:33.936Z,1513234713.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:34.157Z,1513234714.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:34.299Z,1513234714.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:34.338Z,1513234714.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:34.701Z,1513234714.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:34.736Z,1513234714.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:34.954Z,1513234714.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:35.095Z,1513234715.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:35.112Z,1513234715.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:35.357Z,1513234715.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:35.505Z,1513234715.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:35.520Z,1513234715.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:35.917Z,1513234715.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:35.953Z,1513234715.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:36.153Z,1513234716.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:36.310Z,1513234716.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:36.324Z,1513234716.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:36.708Z,1513234716.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:36.723Z,1513234716.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:36.950Z,1513234716.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:37.123Z,1513234717.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:37.153Z,1513234717.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:37.353Z,1513234717.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:37.498Z,1513234717.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:37.531Z,1513234717.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:37.910Z,1513234717.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:37.925Z,1513234717.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:38.149Z,1513234718.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:38.306Z,1513234718.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:38.339Z,1513234718.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:38.706Z,1513234718.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:38.727Z,1513234718.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:38.945Z,1513234718.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:39.111Z,1513234719.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:39.173Z,1513234719.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:39.349Z,1513234719.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:39.510Z,1513234719.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:39.543Z,1513234719.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:39.895Z,1513234719.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:39.912Z,1513234719.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:40.145Z,1513234720.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:40.299Z,1513234720.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:40.341Z,1513234720.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:40.696Z,1513234720.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:40.735Z,1513234720.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:40.941Z,1513234720.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:41.107Z,1513234721.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:41.139Z,1513234721.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:41.345Z,1513234721.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:41.516Z,1513234721.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:41.542Z,1513234721.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:41.914Z,1513234721.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:41.943Z,1513234721.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:42.141Z,1513234722.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:42.309Z,1513234722.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:42.343Z,1513234722.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:42.701Z,1513234722.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:42.715Z,1513234722.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:42.937Z,1513234722.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:43.098Z,1513234723.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:43.113Z,1513234723.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:43.341Z,1513234723.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:43.554Z,1513234723.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:43.623Z,1513234723.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:43.900Z,1513234723.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:43.923Z,1513234723.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:44.137Z,1513234724.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:44.303Z,1513234724.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:44.323Z,1513234724.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:44.731Z,1513234724.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:44.772Z,1513234724.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:44.935Z,1513234724.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:45.117Z,1513234725.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:45.132Z,1513234725.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:45.341Z,1513234725.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:45.518Z,1513234725.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:45.553Z,1513234725.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:45.907Z,1513234725.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:45.927Z,1513234725.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:46.137Z,1513234726.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:46.305Z,1513234726.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:46.320Z,1513234726.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:46.720Z,1513234726.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:46.739Z,1513234726.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:46.934Z,1513234726.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:47.098Z,1513234727.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:47.131Z,1513234727.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:47.337Z,1513234727.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:47.517Z,1513234727.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:47.539Z,1513234727.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:47.919Z,1513234727.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:47.947Z,1513234727.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:48.134Z,1513234728.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:48.315Z,1513234728.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:48.335Z,1513234728.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:48.699Z,1513234728.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:48.726Z,1513234728.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:48.931Z,1513234728.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:49.096Z,1513234729.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:49.131Z,1513234729.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:49.349Z,1513234729.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:49.495Z,1513234729.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:49.527Z,1513234729.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:49.896Z,1513234729.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:49.952Z,1513234729.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:50.145Z,1513234730.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:50.295Z,1513234730.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:50.330Z,1513234730.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:50.705Z,1513234730.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:50.739Z,1513234730.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:50.942Z,1513234730.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:51.129Z,1513234731.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:51.198Z,1513234731.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:51.349Z,1513234731.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:51.525Z,1513234731.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:51.540Z,1513234731.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:51.903Z,1513234731.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:51.951Z,1513234731.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:52.145Z,1513234732.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:52.303Z,1513234732.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:52.333Z,1513234732.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:52.722Z,1513234732.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:52.743Z,1513234732.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:52.941Z,1513234732.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:53.123Z,1513234733.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:53.143Z,1513234733.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:53.345Z,1513234733.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:53.518Z,1513234733.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:53.538Z,1513234733.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:53.920Z,1513234733.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:53.936Z,1513234733.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:54.141Z,1513234734.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:54.333Z,1513234734.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:54.389Z,1513234734.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:54.703Z,1513234734.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:54.757Z,1513234734.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:54.937Z,1513234734.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:55.111Z,1513234735.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:55.131Z,1513234735.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:55.341Z,1513234735.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:55.504Z,1513234735.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:55.519Z,1513234735.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:55.908Z,1513234735.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:55.924Z,1513234735.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:56.140Z,1513234736.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:56.307Z,1513234736.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:56.322Z,1513234736.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:56.713Z,1513234736.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:56.735Z,1513234736.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:56.933Z,1513234736.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:57.114Z,1513234737.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:57.128Z,1513234737.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:57.337Z,1513234737.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:57.531Z,1513234737.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:57.577Z,1513234737.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:57.895Z,1513234737.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:57.922Z,1513234737.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:58.133Z,1513234738.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:58.292Z,1513234738.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:58.327Z,1513234738.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:58.705Z,1513234738.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:58.727Z,1513234738.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:58.929Z,1513234738.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:59.108Z,1513234739.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:59.127Z,1513234739.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:59.333Z,1513234739.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:59.518Z,1513234739.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:59.532Z,1513234739.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:58:59.930Z,1513234739.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:58:59.979Z,1513234739.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:00.129Z,1513234740.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:00.925Z,1513234740.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:01.329Z,1513234741.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:02.126Z,1513234742.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:02.922Z,1513234742.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:03.369Z,1513234743.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:03.425Z,1513234743.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:03.459Z,1513234743.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:03.566Z,1513234743.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:03.614Z,1513234743.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:03.927Z,1513234743.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:03.981Z,1513234743.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:04.165Z,1513234744.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:04.317Z,1513234744.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:04.332Z,1513234744.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:04.712Z,1513234744.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:04.733Z,1513234744.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:04.962Z,1513234744.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:05.117Z,1513234745.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:05.132Z,1513234745.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:05.373Z,1513234745.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:05.521Z,1513234745.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:05.537Z,1513234745.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:05.921Z,1513234745.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:05.936Z,1513234745.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:06.169Z,1513234746.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:06.322Z,1513234746.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:06.337Z,1513234746.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:06.730Z,1513234746.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:06.782Z,1513234746.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:06.965Z,1513234746.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:07.149Z,1513234747.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:07.193Z,1513234747.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:07.369Z,1513234747.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:07.513Z,1513234747.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:07.548Z,1513234747.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:07.913Z,1513234747.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:07.937Z,1513234747.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:08.168Z,1513234748.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:08.307Z,1513234748.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:08.333Z,1513234748.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:08.727Z,1513234748.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:08.747Z,1513234748.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:08.762Z,1513234748.762 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T06:59:08.961Z,1513234748.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:09.136Z,1513234749.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:09.152Z,1513234749.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:09.365Z,1513234749.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:09.536Z,1513234749.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:09.559Z,1513234749.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:09.911Z,1513234749.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:09.944Z,1513234749.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:10.161Z,1513234750.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:10.343Z,1513234750.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:10.407Z,1513234750.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:10.716Z,1513234750.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:10.778Z,1513234750.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:10.957Z,1513234750.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:11.110Z,1513234751.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:11.139Z,1513234751.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:11.361Z,1513234751.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:11.532Z,1513234751.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:11.572Z,1513234751.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:11.926Z,1513234751.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:11.948Z,1513234751.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:12.160Z,1513234752.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:12.330Z,1513234752.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:12.382Z,1513234752.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:12.715Z,1513234752.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:12.729Z,1513234752.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:12.954Z,1513234752.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:13.110Z,1513234753.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:13.140Z,1513234753.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:13.357Z,1513234753.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:13.511Z,1513234753.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:13.587Z,1513234753.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:13.908Z,1513234753.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:13.940Z,1513234753.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:14.153Z,1513234754.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:14.304Z,1513234754.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:14.332Z,1513234754.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:14.717Z,1513234754.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:14.755Z,1513234754.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:14.949Z,1513234754.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:15.142Z,1513234755.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:15.159Z,1513234755.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:15.353Z,1513234755.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:15.514Z,1513234755.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:15.547Z,1513234755.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:15.915Z,1513234755.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:15.941Z,1513234755.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:16.149Z,1513234756.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:16.312Z,1513234756.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:16.344Z,1513234756.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:16.738Z,1513234756.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:16.777Z,1513234756.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:16.946Z,1513234756.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:17.142Z,1513234757.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:17.157Z,1513234757.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:17.369Z,1513234757.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:17.526Z,1513234757.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:17.552Z,1513234757.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:17.936Z,1513234757.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:17.951Z,1513234757.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:18.165Z,1513234758.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:18.330Z,1513234758.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:18.351Z,1513234758.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:18.712Z,1513234758.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:18.746Z,1513234758.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:18.961Z,1513234758.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:19.107Z,1513234759.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:19.150Z,1513234759.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:19.365Z,1513234759.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:19.507Z,1513234759.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:19.544Z,1513234759.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:19.911Z,1513234759.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:19.952Z,1513234759.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:20.161Z,1513234760.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:20.307Z,1513234760.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:20.344Z,1513234760.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:20.726Z,1513234760.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:20.806Z,1513234760.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:20.957Z,1513234760.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:21.122Z,1513234761.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:21.170Z,1513234761.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:21.361Z,1513234761.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:21.522Z,1513234761.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:21.549Z,1513234761.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:21.915Z,1513234761.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:21.953Z,1513234761.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:22.157Z,1513234762.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:22.307Z,1513234762.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:22.327Z,1513234762.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:22.712Z,1513234762.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:22.739Z,1513234762.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:22.954Z,1513234762.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:23.127Z,1513234763.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:23.155Z,1513234763.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:23.357Z,1513234763.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:23.526Z,1513234763.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:23.541Z,1513234763.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:23.934Z,1513234763.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:23.950Z,1513234763.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:24.154Z,1513234764.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:24.329Z,1513234764.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:24.346Z,1513234764.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:24.707Z,1513234764.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:24.743Z,1513234764.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:24.949Z,1513234764.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:25.107Z,1513234765.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:25.133Z,1513234765.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:25.354Z,1513234765.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:25.522Z,1513234765.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:25.540Z,1513234765.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:25.907Z,1513234765.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:25.939Z,1513234765.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:26.149Z,1513234766.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:26.322Z,1513234766.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:26.353Z,1513234766.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:26.770Z,1513234766.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:26.802Z,1513234766.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:26.945Z,1513234766.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:27.138Z,1513234767.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:27.173Z,1513234767.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:27.349Z,1513234767.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:27.530Z,1513234767.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:27.561Z,1513234767.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:27.913Z,1513234767.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:27.936Z,1513234767.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:28.145Z,1513234768.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:28.317Z,1513234768.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:28.332Z,1513234768.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:28.715Z,1513234768.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:28.732Z,1513234768.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:28.941Z,1513234768.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:29.110Z,1513234769.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:29.133Z,1513234769.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:29.345Z,1513234769.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:29.536Z,1513234769.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:29.590Z,1513234769.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:29.925Z,1513234769.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:29.950Z,1513234769.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:30.142Z,1513234770.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:30.326Z,1513234770.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:30.348Z,1513234770.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:30.713Z,1513234770.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:30.727Z,1513234770.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:30.941Z,1513234770.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:31.116Z,1513234771.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:31.132Z,1513234771.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:31.353Z,1513234771.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:31.516Z,1513234771.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:31.606Z,1513234771.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:31.922Z,1513234771.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:31.961Z,1513234771.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:32.149Z,1513234772.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:32.319Z,1513234772.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:32.369Z,1513234772.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:32.754Z,1513234772.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:32.815Z,1513234772.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:32.946Z,1513234772.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:33.133Z,1513234773.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:33.191Z,1513234773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:33.377Z,1513234773.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:33.522Z,1513234773.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:33.536Z,1513234773.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:33.911Z,1513234773.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:33.934Z,1513234773.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:34.173Z,1513234774.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:34.317Z,1513234774.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:34.331Z,1513234774.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:34.718Z,1513234774.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:34.739Z,1513234774.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:34.969Z,1513234774.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:35.110Z,1513234775.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:35.142Z,1513234775.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:35.373Z,1513234775.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:35.528Z,1513234775.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:35.544Z,1513234775.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:35.928Z,1513234775.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:35.948Z,1513234775.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:36.172Z,1513234776.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:36.317Z,1513234776.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:36.347Z,1513234776.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:36.707Z,1513234776.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:36.745Z,1513234776.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:36.965Z,1513234776.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:37.107Z,1513234777.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:37.143Z,1513234777.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:37.371Z,1513234777.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:37.507Z,1513234777.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:37.543Z,1513234777.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:37.908Z,1513234777.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:37.963Z,1513234777.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:38.165Z,1513234778.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:38.304Z,1513234778.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:38.319Z,1513234778.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:38.718Z,1513234778.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:38.744Z,1513234778.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:38.961Z,1513234778.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:39.152Z,1513234779.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:39.211Z,1513234779.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:39.365Z,1513234779.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:39.525Z,1513234779.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:39.551Z,1513234779.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:39.913Z,1513234779.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:39.928Z,1513234779.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:40.161Z,1513234780.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:40.316Z,1513234780.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:40.331Z,1513234780.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:40.714Z,1513234780.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:40.733Z,1513234780.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:40.957Z,1513234780.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:41.118Z,1513234781.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:41.132Z,1513234781.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:41.361Z,1513234781.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:41.525Z,1513234781.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:41.580Z,1513234781.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:41.925Z,1513234781.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:41.940Z,1513234781.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:42.158Z,1513234782.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:42.332Z,1513234782.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:42.376Z,1513234782.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:42.719Z,1513234782.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:42.734Z,1513234782.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:42.954Z,1513234782.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:43.110Z,1513234783.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:43.139Z,1513234783.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:43.357Z,1513234783.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:43.518Z,1513234783.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:43.541Z,1513234783.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:43.922Z,1513234783.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:43.936Z,1513234783.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:44.155Z,1513234784.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:44.316Z,1513234784.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:44.331Z,1513234784.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:44.724Z,1513234784.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:44.739Z,1513234784.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:44.950Z,1513234784.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:45.126Z,1513234785.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:45.147Z,1513234785.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:45.353Z,1513234785.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:45.540Z,1513234785.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:45.579Z,1513234785.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:45.907Z,1513234785.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:45.939Z,1513234785.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:46.149Z,1513234786.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:46.307Z,1513234786.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:46.340Z,1513234786.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:46.709Z,1513234786.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:46.738Z,1513234786.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:46.946Z,1513234786.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:47.108Z,1513234787.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:47.144Z,1513234787.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:47.349Z,1513234787.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:47.537Z,1513234787.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:47.552Z,1513234787.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:47.929Z,1513234787.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:47.949Z,1513234787.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:48.146Z,1513234788.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:48.325Z,1513234788.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:48.344Z,1513234788.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:48.703Z,1513234788.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:48.787Z,1513234788.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:48.941Z,1513234788.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:49.107Z,1513234789.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:49.148Z,1513234789.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:49.345Z,1513234789.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:49.511Z,1513234789.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:49.526Z,1513234789.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:49.916Z,1513234789.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:49.931Z,1513234789.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:50.141Z,1513234790.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:50.309Z,1513234790.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:50.323Z,1513234790.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:50.729Z,1513234790.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:50.761Z,1513234790.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:50.939Z,1513234790.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:51.128Z,1513234791.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:51.162Z,1513234791.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:51.345Z,1513234791.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:51.530Z,1513234791.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:51.556Z,1513234791.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:51.952Z,1513234791.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:51.983Z,1513234791.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:52.141Z,1513234792.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:52.312Z,1513234792.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:52.403Z,1513234792.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:52.715Z,1513234792.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:52.730Z,1513234792.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:52.937Z,1513234792.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:53.110Z,1513234793.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:53.158Z,1513234793.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:53.341Z,1513234793.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:53.525Z,1513234793.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:53.540Z,1513234793.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:53.927Z,1513234793.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:54.012Z,1513234794.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:54.137Z,1513234794.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:54.325Z,1513234794.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:54.347Z,1513234794.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:54.718Z,1513234794.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:54.733Z,1513234794.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:54.934Z,1513234794.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:55.128Z,1513234795.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:55.156Z,1513234795.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:55.337Z,1513234795.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:55.508Z,1513234795.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:55.541Z,1513234795.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:55.908Z,1513234795.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:55.936Z,1513234795.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:56.133Z,1513234796.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:56.307Z,1513234796.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:56.338Z,1513234796.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:56.730Z,1513234796.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:56.744Z,1513234796.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:56.929Z,1513234796.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:57.126Z,1513234797.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:57.159Z,1513234797.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:57.333Z,1513234797.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:57.522Z,1513234797.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:57.554Z,1513234797.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:57.910Z,1513234797.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:57.936Z,1513234797.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:58.129Z,1513234798.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:58.307Z,1513234798.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:58.341Z,1513234798.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:58.712Z,1513234798.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:58.739Z,1513234798.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:58.927Z,1513234798.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:59.108Z,1513234799.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:59.140Z,1513234799.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:59.373Z,1513234799.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:59.528Z,1513234799.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T06:59:59.550Z,1513234799.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T06:59:59.554Z,1513234799.554 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T06:59:59.554Z,1513234799.554 [Default:CheckIn:C.Wait] Stopped
2017-12-14T06:59:59.554Z,1513234799.554 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T06:59:59.554Z,1513234799.554 [Default:CheckIn:D] Running Loop=1
2017-12-14T06:59:59.928Z,1513234799.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:00.056Z,1513234800.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:00.059Z,1513234800.059 [Default:CheckIn:D] Stopped
2017-12-14T07:00:00.059Z,1513234800.059 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:00:00.169Z,1513234800.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:00.966Z,1513234800.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:01.389Z,1513234801.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:02.189Z,1513234802.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:02.985Z,1513234802.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:03.389Z,1513234803.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:03.440Z,1513234803.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:03.483Z,1513234803.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 386.744499 min 
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn:E] Stopped
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn] Stopped
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn](INFO): Running loop #38
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn] Running Loop=38
2017-12-14T07:00:03.487Z,1513234803.487 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:00:03.488Z,1513234803.488 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:00:03.589Z,1513234803.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:03.626Z,1513234803.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:03.944Z,1513234803.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:03.979Z,1513234803.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:04.185Z,1513234804.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:04.350Z,1513234804.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:04.364Z,1513234804.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:04.755Z,1513234804.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:04.778Z,1513234804.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:04.981Z,1513234804.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:05.131Z,1513234805.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:05.201Z,1513234805.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:05.385Z,1513234805.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:05.550Z,1513234805.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:05.594Z,1513234805.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:05.950Z,1513234805.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:05.964Z,1513234805.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:06.181Z,1513234806.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:06.341Z,1513234806.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:06.367Z,1513234806.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:06.741Z,1513234806.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:06.756Z,1513234806.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:06.977Z,1513234806.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:07.147Z,1513234807.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:07.162Z,1513234807.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:07.381Z,1513234807.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:07.544Z,1513234807.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:07.559Z,1513234807.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:07.940Z,1513234807.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:07.956Z,1513234807.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:08.177Z,1513234808.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:08.331Z,1513234808.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:08.351Z,1513234808.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:08.745Z,1513234808.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:08.767Z,1513234808.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:08.975Z,1513234808.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:09.146Z,1513234809.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:09.161Z,1513234809.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:09.381Z,1513234809.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:09.550Z,1513234809.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:09.572Z,1513234809.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:09.943Z,1513234809.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:09.959Z,1513234809.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:10.180Z,1513234810.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:10.340Z,1513234810.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:10.356Z,1513234810.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:10.742Z,1513234810.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:10.759Z,1513234810.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:10.981Z,1513234810.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:11.142Z,1513234811.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:11.170Z,1513234811.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:11.385Z,1513234811.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:11.550Z,1513234811.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:11.565Z,1513234811.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:11.962Z,1513234811.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:12.003Z,1513234812.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:12.181Z,1513234812.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:12.349Z,1513234812.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:12.372Z,1513234812.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:12.744Z,1513234812.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:12.762Z,1513234812.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:12.977Z,1513234812.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:13.134Z,1513234813.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:13.160Z,1513234813.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:13.381Z,1513234813.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:13.535Z,1513234813.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:13.558Z,1513234813.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:13.936Z,1513234813.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:13.999Z,1513234813.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:14.177Z,1513234814.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:14.334Z,1513234814.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:14.380Z,1513234814.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:14.750Z,1513234814.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:14.818Z,1513234814.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:14.974Z,1513234814.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:15.154Z,1513234815.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:15.169Z,1513234815.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:15.377Z,1513234815.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:15.553Z,1513234815.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:15.606Z,1513234815.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:15.947Z,1513234815.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:15.963Z,1513234815.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:16.173Z,1513234816.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:16.346Z,1513234816.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:16.406Z,1513234816.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:16.759Z,1513234816.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:16.779Z,1513234816.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:16.969Z,1513234816.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:17.171Z,1513234817.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:17.193Z,1513234817.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:17.373Z,1513234817.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:17.567Z,1513234817.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:17.584Z,1513234817.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:17.948Z,1513234817.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:17.980Z,1513234817.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:18.170Z,1513234818.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:18.350Z,1513234818.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:18.379Z,1513234818.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:18.738Z,1513234818.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:18.753Z,1513234818.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:18.966Z,1513234818.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:19.143Z,1513234819.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:19.187Z,1513234819.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:19.370Z,1513234819.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:19.541Z,1513234819.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:19.555Z,1513234819.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:19.938Z,1513234819.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:19.966Z,1513234819.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:20.165Z,1513234820.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:20.342Z,1513234820.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:20.357Z,1513234820.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:20.745Z,1513234820.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:20.793Z,1513234820.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:20.961Z,1513234820.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:21.165Z,1513234821.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:21.203Z,1513234821.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:21.365Z,1513234821.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:21.547Z,1513234821.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:21.568Z,1513234821.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:21.946Z,1513234821.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:21.962Z,1513234821.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:22.163Z,1513234822.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:22.344Z,1513234822.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:22.360Z,1513234822.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:22.741Z,1513234822.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:22.771Z,1513234822.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:22.957Z,1513234822.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:23.135Z,1513234823.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:23.166Z,1513234823.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:23.361Z,1513234823.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:23.561Z,1513234823.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:23.583Z,1513234823.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:23.960Z,1513234823.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:23.982Z,1513234823.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:24.157Z,1513234824.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:24.383Z,1513234824.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:24.455Z,1513234824.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:24.731Z,1513234824.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:24.766Z,1513234824.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:24.953Z,1513234824.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:25.131Z,1513234825.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:25.167Z,1513234825.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:25.357Z,1513234825.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:25.535Z,1513234825.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:25.574Z,1513234825.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:25.936Z,1513234825.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:25.970Z,1513234825.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:26.153Z,1513234826.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:26.332Z,1513234826.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:26.369Z,1513234826.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:26.757Z,1513234826.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:26.774Z,1513234826.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:26.951Z,1513234826.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:27.168Z,1513234827.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:27.195Z,1513234827.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:27.353Z,1513234827.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:27.565Z,1513234827.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:27.617Z,1513234827.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:27.932Z,1513234827.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:27.967Z,1513234827.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:28.149Z,1513234828.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:28.330Z,1513234828.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:28.344Z,1513234828.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:28.733Z,1513234828.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:28.766Z,1513234828.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:28.946Z,1513234828.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:29.131Z,1513234829.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:29.152Z,1513234829.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:29.349Z,1513234829.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:29.551Z,1513234829.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:29.578Z,1513234829.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:29.955Z,1513234829.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:29.988Z,1513234829.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:30.145Z,1513234830.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:30.349Z,1513234830.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:30.381Z,1513234830.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:30.750Z,1513234830.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:30.786Z,1513234830.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:30.942Z,1513234830.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:31.142Z,1513234831.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:31.178Z,1513234831.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:31.345Z,1513234831.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:31.540Z,1513234831.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:31.556Z,1513234831.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:31.941Z,1513234831.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:31.956Z,1513234831.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:32.141Z,1513234832.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:32.338Z,1513234832.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:32.359Z,1513234832.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:32.746Z,1513234832.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:32.767Z,1513234832.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:32.937Z,1513234832.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:33.147Z,1513234833.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:33.161Z,1513234833.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:33.341Z,1513234833.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:33.551Z,1513234833.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:33.592Z,1513234833.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:33.962Z,1513234833.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:34.005Z,1513234834.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:34.137Z,1513234834.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:34.343Z,1513234834.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:34.364Z,1513234834.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:34.743Z,1513234834.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:34.763Z,1513234834.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:34.933Z,1513234834.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:35.134Z,1513234835.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:35.191Z,1513234835.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:35.337Z,1513234835.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:35.552Z,1513234835.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:35.610Z,1513234835.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:35.955Z,1513234835.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:35.975Z,1513234835.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:36.134Z,1513234836.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:36.357Z,1513234836.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:36.399Z,1513234836.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:36.731Z,1513234836.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:36.771Z,1513234836.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:36.929Z,1513234836.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:37.153Z,1513234837.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:37.222Z,1513234837.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:37.334Z,1513234837.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:37.538Z,1513234837.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:37.553Z,1513234837.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:37.934Z,1513234837.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:37.949Z,1513234837.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:38.129Z,1513234838.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:38.341Z,1513234838.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:38.356Z,1513234838.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:38.751Z,1513234838.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:38.787Z,1513234838.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:38.925Z,1513234838.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:39.154Z,1513234839.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:39.192Z,1513234839.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:39.329Z,1513234839.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:39.554Z,1513234839.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:39.588Z,1513234839.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:39.943Z,1513234839.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:39.958Z,1513234839.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:40.125Z,1513234840.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:40.372Z,1513234840.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:40.419Z,1513234840.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:40.742Z,1513234840.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:40.758Z,1513234840.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:40.923Z,1513234840.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:41.152Z,1513234841.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:41.167Z,1513234841.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:41.353Z,1513234841.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:41.557Z,1513234841.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:41.580Z,1513234841.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:41.955Z,1513234841.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:42.003Z,1513234842.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:42.149Z,1513234842.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:42.347Z,1513234842.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:42.362Z,1513234842.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:42.729Z,1513234842.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:42.764Z,1513234842.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:42.946Z,1513234842.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:43.154Z,1513234843.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:43.176Z,1513234843.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:43.353Z,1513234843.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:43.531Z,1513234843.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:43.608Z,1513234843.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:43.940Z,1513234843.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:43.955Z,1513234843.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:44.149Z,1513234844.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:44.341Z,1513234844.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:44.356Z,1513234844.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:44.742Z,1513234844.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:44.767Z,1513234844.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:44.945Z,1513234844.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:45.146Z,1513234845.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:45.160Z,1513234845.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:45.349Z,1513234845.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:45.562Z,1513234845.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:45.618Z,1513234845.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:45.941Z,1513234845.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:45.958Z,1513234845.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:46.145Z,1513234846.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:46.339Z,1513234846.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:46.354Z,1513234846.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:46.764Z,1513234846.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:46.805Z,1513234846.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:46.942Z,1513234846.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:47.154Z,1513234847.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:47.199Z,1513234847.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:47.345Z,1513234847.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:47.555Z,1513234847.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:47.598Z,1513234847.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:47.954Z,1513234847.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:47.976Z,1513234847.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:48.141Z,1513234848.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:48.353Z,1513234848.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:48.367Z,1513234848.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:48.739Z,1513234848.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:48.754Z,1513234848.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:48.965Z,1513234848.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:49.134Z,1513234849.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:49.167Z,1513234849.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:49.369Z,1513234849.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:49.546Z,1513234849.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:49.564Z,1513234849.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:49.968Z,1513234849.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:50.007Z,1513234850.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:50.165Z,1513234850.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:50.331Z,1513234850.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:50.366Z,1513234850.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:50.751Z,1513234850.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:50.766Z,1513234850.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:50.962Z,1513234850.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:51.154Z,1513234851.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:51.183Z,1513234851.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:51.365Z,1513234851.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:51.556Z,1513234851.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:51.571Z,1513234851.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:51.932Z,1513234851.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:51.968Z,1513234851.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:52.162Z,1513234852.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:52.336Z,1513234852.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:52.363Z,1513234852.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:52.732Z,1513234852.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:52.773Z,1513234852.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:52.958Z,1513234852.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:53.139Z,1513234853.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:53.178Z,1513234853.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:53.361Z,1513234853.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:53.556Z,1513234853.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:53.570Z,1513234853.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:53.960Z,1513234853.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:53.982Z,1513234853.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:54.157Z,1513234854.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:54.356Z,1513234854.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:54.377Z,1513234854.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:54.736Z,1513234854.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:54.768Z,1513234854.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:54.954Z,1513234854.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:55.131Z,1513234855.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:55.168Z,1513234855.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:55.357Z,1513234855.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:55.536Z,1513234855.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:55.560Z,1513234855.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:55.932Z,1513234855.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:56.002Z,1513234856.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:56.153Z,1513234856.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:56.368Z,1513234856.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:56.387Z,1513234856.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:56.758Z,1513234856.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:56.795Z,1513234856.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:56.950Z,1513234856.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:57.150Z,1513234857.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:57.189Z,1513234857.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:57.353Z,1513234857.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:57.544Z,1513234857.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:57.586Z,1513234857.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:57.943Z,1513234857.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:57.963Z,1513234857.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:58.149Z,1513234858.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:58.328Z,1513234858.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:58.363Z,1513234858.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:58.737Z,1513234858.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:58.764Z,1513234858.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:58.949Z,1513234858.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:59.131Z,1513234859.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:59.171Z,1513234859.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:59.353Z,1513234859.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:59.567Z,1513234859.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:00:59.615Z,1513234859.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:00:59.967Z,1513234859.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:00.010Z,1513234860.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:00.149Z,1513234860.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:00.946Z,1513234860.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:01.349Z,1513234861.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:02.147Z,1513234862.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:02.941Z,1513234862.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:03.346Z,1513234863.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:03.556Z,1513234863.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:03.565Z,1513234863.565 [BPC1](ERROR): Failed to receive battery data
2017-12-14T07:01:03.565Z,1513234863.565 [BPC1] Communications Fault, FailCount= 1
2017-12-14T07:01:03.565Z,1513234863.565 [BPC1](ERROR): Communications Fault
2017-12-14T07:01:03.580Z,1513234863.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:03.595Z,1513234863.595 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T07:01:03.687Z,1513234863.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:03.722Z,1513234863.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:04.060Z,1513234864.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:04.079Z,1513234864.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:04.141Z,1513234864.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:04.459Z,1513234864.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:04.474Z,1513234864.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:04.487Z,1513234864.487 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:01:04.487Z,1513234864.487 [BPC1] No Fault, FailCount= 1
2017-12-14T07:01:04.869Z,1513234864.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:04.955Z,1513234864.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:04.973Z,1513234864.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:05.263Z,1513234865.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:05.283Z,1513234865.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:05.377Z,1513234865.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:05.670Z,1513234865.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:05.684Z,1513234865.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:06.074Z,1513234866.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:06.088Z,1513234866.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:06.174Z,1513234866.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:06.477Z,1513234866.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:06.499Z,1513234866.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:06.851Z,1513234866.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:06.888Z,1513234866.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:06.969Z,1513234866.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:07.251Z,1513234867.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:07.279Z,1513234867.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:07.373Z,1513234867.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:07.665Z,1513234867.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:07.680Z,1513234867.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:08.052Z,1513234868.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:08.078Z,1513234868.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:08.169Z,1513234868.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:08.474Z,1513234868.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:08.489Z,1513234868.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:08.889Z,1513234868.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:08.966Z,1513234868.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:08.977Z,1513234868.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:09.296Z,1513234869.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:09.328Z,1513234869.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:09.369Z,1513234869.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:09.662Z,1513234869.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:09.677Z,1513234869.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:10.056Z,1513234870.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:10.083Z,1513234870.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:10.165Z,1513234870.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:10.457Z,1513234870.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:10.471Z,1513234870.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:10.856Z,1513234870.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:10.908Z,1513234870.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:10.962Z,1513234870.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:11.251Z,1513234871.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:11.286Z,1513234871.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:11.389Z,1513234871.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:11.676Z,1513234871.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:11.690Z,1513234871.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:12.069Z,1513234872.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:12.099Z,1513234872.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:12.185Z,1513234872.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:12.472Z,1513234872.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:12.498Z,1513234872.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:12.859Z,1513234872.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:12.875Z,1513234872.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:12.981Z,1513234872.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:13.254Z,1513234873.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:13.306Z,1513234873.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:13.385Z,1513234873.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:13.661Z,1513234873.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:13.676Z,1513234873.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:14.061Z,1513234874.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:14.075Z,1513234874.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:14.181Z,1513234874.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:14.470Z,1513234874.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:14.491Z,1513234874.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:14.891Z,1513234874.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:14.907Z,1513234874.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:14.977Z,1513234874.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:15.265Z,1513234875.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:15.290Z,1513234875.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:15.381Z,1513234875.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:15.654Z,1513234875.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:15.677Z,1513234875.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:16.062Z,1513234876.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:16.077Z,1513234876.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:16.077Z,1513234876.077 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130
2017-12-14T07:01:16.077Z,1513234876.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:01:16.079Z,1513234876.079 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:16.079Z,1513234876.079 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 130
2017-12-14T07:01:16.079Z,1513234876.079 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:01:16.097Z,1513234876.097 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:16.097Z,1513234876.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2017-12-14T07:01:16.097Z,1513234876.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:01:16.113Z,1513234876.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:01:16.113Z,1513234876.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:01:16.114Z,1513234876.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:01:16.189Z,1513234876.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:16.458Z,1513234876.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:16.502Z,1513234876.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:01:16.502Z,1513234876.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130
2017-12-14T07:01:16.502Z,1513234876.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:01:16.502Z,1513234876.502 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 130
2017-12-14T07:01:16.503Z,1513234876.503 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:01:16.503Z,1513234876.503 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2017-12-14T07:01:16.859Z,1513234876.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:16.902Z,1513234876.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:01:16.902Z,1513234876.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:01:16.903Z,1513234876.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:01:16.903Z,1513234876.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:01:16.904Z,1513234876.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:01:16.904Z,1513234876.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:01:16.904Z,1513234876.904 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:01:16.909Z,1513234876.909 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:01:16.909Z,1513234876.909 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:01:16.993Z,1513234876.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:17.265Z,1513234877.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:17.293Z,1513234877.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:17.398Z,1513234877.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:17.678Z,1513234877.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:17.705Z,1513234877.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:18.124Z,1513234878.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:18.163Z,1513234878.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:18.194Z,1513234878.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:18.465Z,1513234878.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:18.499Z,1513234878.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:18.917Z,1513234878.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:18.989Z,1513234878.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:19.012Z,1513234879.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:19.263Z,1513234879.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:19.312Z,1513234879.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:19.395Z,1513234879.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:19.662Z,1513234879.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:19.683Z,1513234879.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:20.064Z,1513234880.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:20.100Z,1513234880.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:20.189Z,1513234880.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:20.476Z,1513234880.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:20.522Z,1513234880.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:20.876Z,1513234880.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:20.904Z,1513234880.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:20.986Z,1513234880.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:21.293Z,1513234881.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:21.337Z,1513234881.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:21.389Z,1513234881.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:21.653Z,1513234881.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:21.688Z,1513234881.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:22.071Z,1513234882.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:22.109Z,1513234882.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:22.186Z,1513234882.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:22.461Z,1513234882.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:22.515Z,1513234882.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:22.865Z,1513234882.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:22.946Z,1513234882.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:22.982Z,1513234882.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:23.252Z,1513234883.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:23.296Z,1513234883.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:23.410Z,1513234883.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:23.701Z,1513234883.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:23.719Z,1513234883.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:24.071Z,1513234884.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:24.099Z,1513234884.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:24.205Z,1513234884.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:24.479Z,1513234884.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:24.549Z,1513234884.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:24.917Z,1513234884.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:25.001Z,1513234885.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:25.027Z,1513234885.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:25.266Z,1513234885.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:25.281Z,1513234885.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:25.405Z,1513234885.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:25.666Z,1513234885.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:25.745Z,1513234885.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:26.052Z,1513234886.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:26.115Z,1513234886.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:26.201Z,1513234886.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:26.489Z,1513234886.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:26.503Z,1513234886.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:26.870Z,1513234886.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:26.920Z,1513234886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:26.997Z,1513234886.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:27.277Z,1513234887.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:27.299Z,1513234887.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:27.401Z,1513234887.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:27.654Z,1513234887.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:27.691Z,1513234887.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:28.068Z,1513234888.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:28.116Z,1513234888.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:28.198Z,1513234888.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:28.452Z,1513234888.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:28.495Z,1513234888.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:28.853Z,1513234888.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:28.932Z,1513234888.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:28.994Z,1513234888.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:29.252Z,1513234889.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:29.298Z,1513234889.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:29.398Z,1513234889.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:29.662Z,1513234889.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:29.703Z,1513234889.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:30.067Z,1513234890.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:30.107Z,1513234890.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:30.194Z,1513234890.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:30.463Z,1513234890.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:30.504Z,1513234890.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:30.852Z,1513234890.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:30.924Z,1513234890.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:30.990Z,1513234890.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:31.253Z,1513234891.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:31.299Z,1513234891.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:31.394Z,1513234891.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:31.653Z,1513234891.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:31.702Z,1513234891.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:32.052Z,1513234892.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:32.098Z,1513234892.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:32.189Z,1513234892.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:32.473Z,1513234892.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:32.502Z,1513234892.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:32.879Z,1513234892.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:32.916Z,1513234892.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:32.986Z,1513234892.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:33.276Z,1513234893.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:33.299Z,1513234893.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:33.389Z,1513234893.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:33.653Z,1513234893.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:33.692Z,1513234893.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:34.071Z,1513234894.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:34.111Z,1513234894.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:34.186Z,1513234894.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:34.456Z,1513234894.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:34.527Z,1513234894.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:34.863Z,1513234894.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:34.883Z,1513234894.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:34.982Z,1513234894.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:35.263Z,1513234895.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:35.331Z,1513234895.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:35.385Z,1513234895.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:35.675Z,1513234895.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:35.703Z,1513234895.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:36.076Z,1513234896.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:36.096Z,1513234896.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:36.183Z,1513234896.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:36.476Z,1513234896.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:36.496Z,1513234896.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:36.852Z,1513234896.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:36.967Z,1513234896.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:36.977Z,1513234896.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:37.261Z,1513234897.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:37.306Z,1513234897.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:37.406Z,1513234897.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:37.670Z,1513234897.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:37.703Z,1513234897.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:38.065Z,1513234898.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:38.121Z,1513234898.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:38.201Z,1513234898.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:38.466Z,1513234898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:38.487Z,1513234898.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:38.892Z,1513234898.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:38.979Z,1513234898.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:38.998Z,1513234898.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:39.273Z,1513234899.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:39.339Z,1513234899.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:39.449Z,1513234899.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:39.663Z,1513234899.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:39.682Z,1513234899.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:40.079Z,1513234900.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:40.102Z,1513234900.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:40.246Z,1513234900.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:40.452Z,1513234900.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:40.523Z,1513234900.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:40.863Z,1513234900.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:40.903Z,1513234900.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:41.042Z,1513234901.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:41.257Z,1513234901.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:41.272Z,1513234901.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:41.446Z,1513234901.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:41.668Z,1513234901.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:41.683Z,1513234901.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:42.113Z,1513234902.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:42.135Z,1513234902.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:42.242Z,1513234902.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:42.469Z,1513234902.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:42.558Z,1513234902.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:42.861Z,1513234902.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:42.875Z,1513234902.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:43.037Z,1513234903.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:43.254Z,1513234903.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:43.286Z,1513234903.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:43.441Z,1513234903.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:43.655Z,1513234903.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:43.679Z,1513234903.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:44.059Z,1513234904.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:44.085Z,1513234904.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:44.238Z,1513234904.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:44.470Z,1513234904.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:44.485Z,1513234904.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:44.865Z,1513234904.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:44.903Z,1513234904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:45.013Z,1513234905.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:45.300Z,1513234905.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:45.344Z,1513234905.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:45.657Z,1513234905.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:45.690Z,1513234905.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:45.809Z,1513234905.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:46.058Z,1513234906.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:46.100Z,1513234906.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:46.457Z,1513234906.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:46.471Z,1513234906.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:46.606Z,1513234906.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:46.855Z,1513234906.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:46.875Z,1513234906.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:47.013Z,1513234907.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:47.251Z,1513234907.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:47.323Z,1513234907.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:47.674Z,1513234907.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:47.720Z,1513234907.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:47.812Z,1513234907.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:48.071Z,1513234908.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:48.090Z,1513234908.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:48.500Z,1513234908.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:48.556Z,1513234908.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:48.607Z,1513234908.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:48.855Z,1513234908.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:48.870Z,1513234908.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:49.113Z,1513234909.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:49.259Z,1513234909.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:49.318Z,1513234909.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:49.676Z,1513234909.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:49.704Z,1513234909.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:49.909Z,1513234909.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:50.064Z,1513234910.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:50.090Z,1513234910.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:50.465Z,1513234910.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:50.505Z,1513234910.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:50.705Z,1513234910.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:50.866Z,1513234910.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:50.948Z,1513234910.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:51.269Z,1513234911.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:51.284Z,1513234911.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:51.385Z,1513234911.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:51.663Z,1513234911.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:51.677Z,1513234911.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:52.051Z,1513234912.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:52.076Z,1513234912.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:52.181Z,1513234912.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:52.451Z,1513234912.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:52.483Z,1513234912.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:52.865Z,1513234912.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:52.952Z,1513234912.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:52.978Z,1513234912.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:53.255Z,1513234913.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:53.281Z,1513234913.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:53.381Z,1513234913.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:53.672Z,1513234913.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:53.693Z,1513234913.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:54.074Z,1513234914.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:54.104Z,1513234914.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:54.177Z,1513234914.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:54.470Z,1513234914.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:54.485Z,1513234914.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:54.851Z,1513234914.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:54.925Z,1513234914.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:54.973Z,1513234914.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:55.258Z,1513234915.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:55.288Z,1513234915.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:55.377Z,1513234915.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:55.652Z,1513234915.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:55.668Z,1513234915.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:56.056Z,1513234916.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:56.072Z,1513234916.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:56.176Z,1513234916.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:56.458Z,1513234916.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:56.489Z,1513234916.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:56.866Z,1513234916.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:56.894Z,1513234916.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:56.969Z,1513234916.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:57.270Z,1513234917.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:57.299Z,1513234917.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:57.373Z,1513234917.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:57.650Z,1513234917.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:57.706Z,1513234917.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:58.056Z,1513234918.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:58.070Z,1513234918.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:58.170Z,1513234918.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:58.460Z,1513234918.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:58.523Z,1513234918.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:58.852Z,1513234918.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:58.877Z,1513234918.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:58.965Z,1513234918.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:59.251Z,1513234919.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:59.282Z,1513234919.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:01:59.369Z,1513234919.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:59.675Z,1513234919.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:01:59.690Z,1513234919.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:00.078Z,1513234920.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:00.092Z,1513234920.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:00.165Z,1513234920.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:00.961Z,1513234920.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:01.365Z,1513234921.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:02.162Z,1513234922.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:02.958Z,1513234922.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:03.361Z,1513234923.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:03.624Z,1513234923.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:03.639Z,1513234923.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:03.737Z,1513234923.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:03.776Z,1513234923.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:04.122Z,1513234924.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:04.152Z,1513234924.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:04.157Z,1513234924.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:04.539Z,1513234924.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:04.559Z,1513234924.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:04.954Z,1513234924.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:04.970Z,1513234924.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:05.010Z,1513234925.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:05.320Z,1513234925.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:05.343Z,1513234925.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:05.422Z,1513234925.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:05.737Z,1513234925.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:05.768Z,1513234925.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:06.130Z,1513234926.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:06.145Z,1513234926.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:06.217Z,1513234926.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:06.537Z,1513234926.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:06.552Z,1513234926.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:07.013Z,1513234927.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:07.112Z,1513234927.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:07.154Z,1513234927.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:07.315Z,1513234927.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:07.347Z,1513234927.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:07.489Z,1513234927.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:07.717Z,1513234927.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:07.761Z,1513234927.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:08.115Z,1513234928.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:08.152Z,1513234928.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:08.285Z,1513234928.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:08.571Z,1513234928.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:08.636Z,1513234928.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:08.933Z,1513234928.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:08.965Z,1513234928.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:09.041Z,1513234929.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:09.342Z,1513234929.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:09.383Z,1513234929.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:09.726Z,1513234929.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:09.767Z,1513234929.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:09.837Z,1513234929.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:10.124Z,1513234930.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:10.180Z,1513234930.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:10.540Z,1513234930.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:10.633Z,1513234930.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:10.637Z,1513234930.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:10.919Z,1513234930.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:10.962Z,1513234930.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:11.038Z,1513234931.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:11.314Z,1513234931.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:11.375Z,1513234931.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:11.743Z,1513234931.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:11.760Z,1513234931.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:11.834Z,1513234931.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:12.125Z,1513234932.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:12.190Z,1513234932.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:12.572Z,1513234932.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:12.630Z,1513234932.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:12.652Z,1513234932.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:12.925Z,1513234932.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:12.940Z,1513234932.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:13.041Z,1513234933.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:13.318Z,1513234933.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:13.347Z,1513234933.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:13.724Z,1513234933.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:13.738Z,1513234933.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:13.837Z,1513234933.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:14.133Z,1513234934.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:14.167Z,1513234934.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:14.544Z,1513234934.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:14.634Z,1513234934.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:14.634Z,1513234934.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:14.941Z,1513234934.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:14.956Z,1513234934.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:15.057Z,1513234935.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:15.339Z,1513234935.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:15.353Z,1513234935.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:15.712Z,1513234935.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:15.744Z,1513234935.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:15.853Z,1513234935.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:16.118Z,1513234936.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:16.144Z,1513234936.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:16.519Z,1513234936.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:16.544Z,1513234936.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:16.650Z,1513234936.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:16.916Z,1513234936.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:16.943Z,1513234936.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:17.069Z,1513234937.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:17.327Z,1513234937.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:17.382Z,1513234937.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:17.738Z,1513234937.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:17.759Z,1513234937.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:17.866Z,1513234937.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:18.134Z,1513234938.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:18.149Z,1513234938.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:18.533Z,1513234938.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:18.556Z,1513234938.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:18.661Z,1513234938.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:18.961Z,1513234938.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:18.994Z,1513234938.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:19.321Z,1513234939.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:19.336Z,1513234939.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:19.385Z,1513234939.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:19.720Z,1513234939.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:19.749Z,1513234939.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:20.124Z,1513234940.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:20.138Z,1513234940.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:20.181Z,1513234940.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:20.570Z,1513234940.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:20.615Z,1513234940.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:20.971Z,1513234940.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:20.977Z,1513234940.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:21.018Z,1513234941.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:21.333Z,1513234941.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:21.356Z,1513234941.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:21.381Z,1513234941.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:21.720Z,1513234941.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:21.757Z,1513234941.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:22.121Z,1513234942.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:22.135Z,1513234942.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:22.177Z,1513234942.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:22.578Z,1513234942.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:22.629Z,1513234942.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:22.922Z,1513234942.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:22.938Z,1513234942.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:22.974Z,1513234942.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:23.322Z,1513234943.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:23.337Z,1513234943.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:23.377Z,1513234943.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:23.760Z,1513234943.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:23.819Z,1513234943.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:24.125Z,1513234944.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:24.147Z,1513234944.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:24.174Z,1513234944.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:24.599Z,1513234944.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:24.639Z,1513234944.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:24.926Z,1513234944.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:24.940Z,1513234944.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:24.969Z,1513234944.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:25.323Z,1513234945.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:25.347Z,1513234945.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:25.373Z,1513234945.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:25.724Z,1513234945.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:25.738Z,1513234945.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:26.126Z,1513234946.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:26.147Z,1513234946.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:26.169Z,1513234946.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:26.610Z,1513234946.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:26.637Z,1513234946.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:26.966Z,1513234946.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:26.971Z,1513234946.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:26.994Z,1513234946.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:27.342Z,1513234947.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:27.357Z,1513234947.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:27.369Z,1513234947.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:27.723Z,1513234947.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:27.739Z,1513234947.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:28.122Z,1513234948.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:28.137Z,1513234948.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:28.165Z,1513234948.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:28.522Z,1513234948.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:28.615Z,1513234948.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:28.923Z,1513234948.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:28.949Z,1513234948.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:28.962Z,1513234948.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:29.316Z,1513234949.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:29.351Z,1513234949.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:29.365Z,1513234949.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:29.745Z,1513234949.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:29.760Z,1513234949.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:30.144Z,1513234950.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:30.161Z,1513234950.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:30.171Z,1513234950.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:30.525Z,1513234950.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:30.552Z,1513234950.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:30.924Z,1513234950.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:30.939Z,1513234950.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:30.958Z,1513234950.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:31.324Z,1513234951.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:31.339Z,1513234951.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:31.361Z,1513234951.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:31.724Z,1513234951.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:31.740Z,1513234951.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:32.128Z,1513234952.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:32.144Z,1513234952.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:32.157Z,1513234952.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:32.531Z,1513234952.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:32.603Z,1513234952.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:32.954Z,1513234952.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:32.975Z,1513234952.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:33.003Z,1513234953.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:33.345Z,1513234953.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:33.389Z,1513234953.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:33.395Z,1513234953.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:33.715Z,1513234953.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:33.742Z,1513234953.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:34.116Z,1513234954.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:34.167Z,1513234954.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:34.185Z,1513234954.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:34.530Z,1513234954.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:34.544Z,1513234954.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:34.962Z,1513234954.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:34.981Z,1513234954.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:34.995Z,1513234954.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:35.335Z,1513234955.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:35.352Z,1513234955.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:35.413Z,1513234955.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:35.739Z,1513234955.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:35.753Z,1513234955.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:36.139Z,1513234956.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:36.153Z,1513234956.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:36.209Z,1513234956.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:36.561Z,1513234956.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:36.672Z,1513234956.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:36.927Z,1513234956.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:36.943Z,1513234956.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:37.005Z,1513234957.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:37.318Z,1513234957.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:37.341Z,1513234957.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:37.409Z,1513234957.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:37.723Z,1513234957.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:37.737Z,1513234957.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:38.126Z,1513234958.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:38.141Z,1513234958.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:38.206Z,1513234958.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:38.568Z,1513234958.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:38.627Z,1513234958.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:38.933Z,1513234958.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:38.948Z,1513234958.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:39.001Z,1513234959.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:39.335Z,1513234959.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:39.350Z,1513234959.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:39.405Z,1513234959.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:39.728Z,1513234959.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:39.751Z,1513234959.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:40.132Z,1513234960.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:40.147Z,1513234960.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:40.201Z,1513234960.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:40.513Z,1513234960.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:40.611Z,1513234960.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:40.931Z,1513234960.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:40.959Z,1513234960.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:40.997Z,1513234960.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:41.324Z,1513234961.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:41.363Z,1513234961.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:41.401Z,1513234961.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:41.739Z,1513234961.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:41.764Z,1513234961.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:42.134Z,1513234962.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:42.166Z,1513234962.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:42.197Z,1513234962.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:42.581Z,1513234962.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:42.640Z,1513234962.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:42.946Z,1513234962.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:42.974Z,1513234962.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:42.993Z,1513234962.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:43.325Z,1513234963.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:43.340Z,1513234963.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:43.397Z,1513234963.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:43.727Z,1513234963.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:43.744Z,1513234963.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:44.128Z,1513234964.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:44.143Z,1513234964.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:44.193Z,1513234964.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:44.534Z,1513234964.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:44.556Z,1513234964.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:44.938Z,1513234964.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:44.954Z,1513234964.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:44.990Z,1513234964.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:45.343Z,1513234965.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:45.358Z,1513234965.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:45.393Z,1513234965.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:45.716Z,1513234965.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:45.744Z,1513234965.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:46.164Z,1513234966.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:46.189Z,1513234966.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:46.209Z,1513234966.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:46.514Z,1513234966.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:46.550Z,1513234966.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:46.957Z,1513234966.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:46.985Z,1513234966.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:47.005Z,1513234967.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:47.320Z,1513234967.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:47.351Z,1513234967.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:47.405Z,1513234967.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:47.738Z,1513234967.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:47.758Z,1513234967.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:48.144Z,1513234968.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:48.159Z,1513234968.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:48.201Z,1513234968.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:48.527Z,1513234968.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:48.554Z,1513234968.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:48.961Z,1513234968.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:48.996Z,1513234968.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:48.997Z,1513234968.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:49.350Z,1513234969.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:49.387Z,1513234969.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:49.418Z,1513234969.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:49.716Z,1513234969.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:49.759Z,1513234969.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:50.115Z,1513234970.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:50.129Z,1513234970.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:50.214Z,1513234970.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:50.556Z,1513234970.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:50.616Z,1513234970.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:50.929Z,1513234970.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:50.944Z,1513234970.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:51.009Z,1513234971.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:51.329Z,1513234971.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:51.347Z,1513234971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:51.413Z,1513234971.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:51.719Z,1513234971.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:51.758Z,1513234971.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:52.127Z,1513234972.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:52.147Z,1513234972.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:52.209Z,1513234972.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:52.554Z,1513234972.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:52.693Z,1513234972.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:52.938Z,1513234972.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:52.953Z,1513234972.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:53.006Z,1513234973.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:53.316Z,1513234973.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:53.351Z,1513234973.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:53.409Z,1513234973.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:53.742Z,1513234973.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:53.763Z,1513234973.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:54.136Z,1513234974.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:54.153Z,1513234974.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:54.205Z,1513234974.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:54.564Z,1513234974.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:54.692Z,1513234974.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:54.919Z,1513234974.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:54.946Z,1513234974.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:55.002Z,1513234975.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:55.319Z,1513234975.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:55.346Z,1513234975.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:55.405Z,1513234975.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:55.717Z,1513234975.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:55.763Z,1513234975.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:56.115Z,1513234976.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:56.151Z,1513234976.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:56.202Z,1513234976.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:56.586Z,1513234976.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:56.646Z,1513234976.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:56.933Z,1513234976.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:56.955Z,1513234976.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:56.997Z,1513234976.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:57.334Z,1513234977.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:57.348Z,1513234977.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:57.401Z,1513234977.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:57.716Z,1513234977.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:57.742Z,1513234977.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:58.115Z,1513234978.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:58.149Z,1513234978.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:58.197Z,1513234978.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:58.512Z,1513234978.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:58.539Z,1513234978.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:58.916Z,1513234978.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:58.986Z,1513234978.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:58.993Z,1513234978.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:59.331Z,1513234979.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:59.359Z,1513234979.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:02:59.397Z,1513234979.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:59.739Z,1513234979.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:02:59.754Z,1513234979.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:00.142Z,1513234980.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:00.156Z,1513234980.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:00.193Z,1513234980.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:00.989Z,1513234980.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:01.393Z,1513234981.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:02.189Z,1513234982.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:02.987Z,1513234982.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:03.389Z,1513234983.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:03.659Z,1513234983.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:03.679Z,1513234983.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:03.798Z,1513234983.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:03.831Z,1513234983.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:04.172Z,1513234984.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:04.185Z,1513234984.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:04.187Z,1513234984.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:04.645Z,1513234984.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:04.686Z,1513234984.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:04.971Z,1513234984.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:04.981Z,1513234984.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:05.006Z,1513234985.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:05.386Z,1513234985.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:05.402Z,1513234985.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:05.426Z,1513234985.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:05.784Z,1513234985.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:05.817Z,1513234985.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:06.181Z,1513234986.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:06.182Z,1513234986.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:06.213Z,1513234986.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:06.616Z,1513234986.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:06.647Z,1513234986.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:06.977Z,1513234986.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:06.979Z,1513234986.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:06.994Z,1513234986.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:07.380Z,1513234987.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:07.381Z,1513234987.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:07.397Z,1513234987.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:07.780Z,1513234987.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:07.794Z,1513234987.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:08.178Z,1513234988.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:08.183Z,1513234988.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:08.197Z,1513234988.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:08.632Z,1513234988.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:08.680Z,1513234988.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:08.965Z,1513234988.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:08.973Z,1513234988.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:09.062Z,1513234989.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:09.369Z,1513234989.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:09.377Z,1513234989.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:09.405Z,1513234989.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:09.790Z,1513234989.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:09.805Z,1513234989.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:10.173Z,1513234990.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:10.174Z,1513234990.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:10.207Z,1513234990.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:10.622Z,1513234990.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:10.660Z,1513234990.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:10.968Z,1513234990.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:10.970Z,1513234990.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:10.999Z,1513234990.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:11.373Z,1513234991.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:11.374Z,1513234991.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:11.390Z,1513234991.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:11.785Z,1513234991.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:11.861Z,1513234991.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:12.170Z,1513234992.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:12.175Z,1513234992.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:12.195Z,1513234992.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:12.570Z,1513234992.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:12.660Z,1513234992.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:12.966Z,1513234992.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:12.973Z,1513234992.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:12.988Z,1513234992.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:13.369Z,1513234993.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:13.373Z,1513234993.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:13.388Z,1513234993.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:13.787Z,1513234993.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:13.816Z,1513234993.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:14.167Z,1513234994.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:14.181Z,1513234994.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:14.216Z,1513234994.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:14.578Z,1513234994.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:14.593Z,1513234994.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:14.962Z,1513234994.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:14.993Z,1513234994.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:15.040Z,1513234995.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:15.377Z,1513234995.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:15.392Z,1513234995.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:15.421Z,1513234995.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:15.771Z,1513234995.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:15.798Z,1513234995.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:16.175Z,1513234996.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:16.195Z,1513234996.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:16.217Z,1513234996.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:16.581Z,1513234996.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:16.646Z,1513234996.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:16.983Z,1513234996.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:17.014Z,1513234997.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:17.050Z,1513234997.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:17.382Z,1513234997.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:17.397Z,1513234997.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:17.417Z,1513234997.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:17.777Z,1513234997.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:17.827Z,1513234997.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:18.163Z,1513234998.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:18.213Z,1513234998.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:18.228Z,1513234998.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:18.612Z,1513234998.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:18.676Z,1513234998.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:18.967Z,1513234998.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:18.993Z,1513234998.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:19.009Z,1513234999.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:19.386Z,1513234999.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:19.400Z,1513234999.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:19.413Z,1513234999.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:19.789Z,1513234999.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:19.804Z,1513234999.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:20.186Z,1513235000.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:20.201Z,1513235000.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:20.209Z,1513235000.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:20.621Z,1513235000.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:20.652Z,1513235000.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:20.975Z,1513235000.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:20.996Z,1513235000.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:21.005Z,1513235001.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:21.410Z,1513235001.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:21.413Z,1513235001.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:21.431Z,1513235001.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:21.786Z,1513235001.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:21.801Z,1513235001.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:22.205Z,1513235002.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:22.222Z,1513235002.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:22.252Z,1513235002.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:22.620Z,1513235002.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:22.666Z,1513235002.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:22.971Z,1513235002.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:23.002Z,1513235003.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:23.011Z,1513235003.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:23.382Z,1513235003.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:23.405Z,1513235003.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:23.416Z,1513235003.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:23.785Z,1513235003.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:23.818Z,1513235003.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:24.171Z,1513235004.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:24.185Z,1513235004.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:24.202Z,1513235004.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:24.631Z,1513235004.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:24.686Z,1513235004.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:24.968Z,1513235004.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:24.997Z,1513235004.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:25.003Z,1513235005.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:25.379Z,1513235005.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:25.394Z,1513235005.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:25.401Z,1513235005.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:25.782Z,1513235005.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:25.797Z,1513235005.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:26.179Z,1513235006.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:26.193Z,1513235006.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:26.197Z,1513235006.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:26.564Z,1513235006.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:26.648Z,1513235006.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:26.965Z,1513235006.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:26.993Z,1513235006.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:27.039Z,1513235007.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:27.366Z,1513235007.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:27.395Z,1513235007.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:27.397Z,1513235007.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:27.778Z,1513235007.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:27.795Z,1513235007.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:28.178Z,1513235008.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:28.193Z,1513235008.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:28.214Z,1513235008.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:28.585Z,1513235008.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:28.615Z,1513235008.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:28.972Z,1513235008.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:28.990Z,1513235008.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:29.015Z,1513235009.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:29.374Z,1513235009.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:29.389Z,1513235009.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:29.393Z,1513235009.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:29.774Z,1513235009.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:29.788Z,1513235009.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:30.166Z,1513235010.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:30.189Z,1513235010.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:30.206Z,1513235010.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:30.581Z,1513235010.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:30.596Z,1513235010.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:30.983Z,1513235010.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:30.986Z,1513235010.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:30.999Z,1513235010.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:31.382Z,1513235011.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:31.403Z,1513235011.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:31.774Z,1513235011.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:31.781Z,1513235011.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:31.801Z,1513235011.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:32.179Z,1513235012.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:32.185Z,1513235012.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:32.196Z,1513235012.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:32.628Z,1513235012.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:32.652Z,1513235012.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:32.976Z,1513235012.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:32.981Z,1513235012.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:32.993Z,1513235012.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:33.386Z,1513235013.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:33.388Z,1513235013.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:33.403Z,1513235013.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:33.786Z,1513235013.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:33.807Z,1513235013.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:34.182Z,1513235014.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:34.189Z,1513235014.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:34.204Z,1513235014.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:34.625Z,1513235014.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:34.644Z,1513235014.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:34.963Z,1513235014.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:34.977Z,1513235014.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:35.011Z,1513235015.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:35.381Z,1513235015.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:35.382Z,1513235015.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:35.412Z,1513235015.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:35.793Z,1513235015.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:35.815Z,1513235015.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:36.177Z,1513235016.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:36.183Z,1513235016.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:36.216Z,1513235016.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:36.621Z,1513235016.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:36.662Z,1513235016.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:36.965Z,1513235016.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:36.974Z,1513235016.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:36.987Z,1513235016.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:37.377Z,1513235017.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:37.379Z,1513235017.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:37.394Z,1513235017.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:37.773Z,1513235017.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:37.875Z,1513235017.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:38.174Z,1513235018.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:38.179Z,1513235018.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:38.212Z,1513235018.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:38.626Z,1513235018.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:38.647Z,1513235018.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:38.969Z,1513235018.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:38.979Z,1513235018.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:39.051Z,1513235019.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:39.373Z,1513235019.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:39.386Z,1513235019.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:39.407Z,1513235019.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:39.785Z,1513235019.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:39.807Z,1513235019.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:40.169Z,1513235020.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:40.188Z,1513235020.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:40.239Z,1513235020.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:40.563Z,1513235020.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:40.653Z,1513235020.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:40.966Z,1513235020.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:40.972Z,1513235020.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:41.051Z,1513235021.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:41.370Z,1513235021.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:41.380Z,1513235021.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:41.411Z,1513235021.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:41.782Z,1513235021.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:41.807Z,1513235021.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:42.165Z,1513235022.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:42.178Z,1513235022.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:42.200Z,1513235022.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:42.578Z,1513235022.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:42.592Z,1513235022.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:42.961Z,1513235022.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:42.978Z,1513235022.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:43.021Z,1513235023.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:43.376Z,1513235023.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:43.395Z,1513235023.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:43.397Z,1513235023.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:43.770Z,1513235023.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:43.793Z,1513235023.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:44.172Z,1513235024.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:44.193Z,1513235024.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:44.253Z,1513235024.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:44.579Z,1513235024.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:44.598Z,1513235024.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:44.986Z,1513235024.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:44.990Z,1513235024.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:45.003Z,1513235025.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:45.390Z,1513235025.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:45.393Z,1513235025.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:45.405Z,1513235025.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:45.758Z,1513235025.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:45.789Z,1513235025.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:46.167Z,1513235026.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:46.189Z,1513235026.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:46.203Z,1513235026.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:46.632Z,1513235026.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:46.654Z,1513235026.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:46.963Z,1513235026.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:46.986Z,1513235026.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:46.991Z,1513235026.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:47.390Z,1513235027.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:47.412Z,1513235027.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:47.455Z,1513235027.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:47.790Z,1513235027.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:47.804Z,1513235027.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:48.175Z,1513235028.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:48.185Z,1513235028.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:48.210Z,1513235028.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:48.619Z,1513235028.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:48.656Z,1513235028.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:48.971Z,1513235028.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:48.981Z,1513235028.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:48.988Z,1513235028.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:49.381Z,1513235029.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:49.385Z,1513235029.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:49.435Z,1513235029.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:49.781Z,1513235029.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:49.812Z,1513235029.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:50.181Z,1513235030.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:50.185Z,1513235030.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:50.219Z,1513235030.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:50.622Z,1513235030.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:50.681Z,1513235030.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:50.971Z,1513235030.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:50.977Z,1513235030.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:50.988Z,1513235030.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:51.377Z,1513235031.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:51.381Z,1513235031.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:51.393Z,1513235031.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:51.774Z,1513235031.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:51.788Z,1513235031.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:52.177Z,1513235032.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:52.187Z,1513235032.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:52.221Z,1513235032.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:52.624Z,1513235032.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:52.665Z,1513235032.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:52.972Z,1513235032.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:52.973Z,1513235032.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:52.990Z,1513235032.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:53.377Z,1513235033.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:53.379Z,1513235033.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:53.394Z,1513235033.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:53.783Z,1513235033.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:53.798Z,1513235033.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:54.173Z,1513235034.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:54.186Z,1513235034.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:54.201Z,1513235034.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:54.567Z,1513235034.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:54.671Z,1513235034.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:54.964Z,1513235034.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:54.969Z,1513235034.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:54.993Z,1513235034.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:55.369Z,1513235035.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:55.373Z,1513235035.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:55.401Z,1513235035.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:55.782Z,1513235035.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:55.807Z,1513235035.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:56.169Z,1513235036.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:56.182Z,1513235036.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:56.215Z,1513235036.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:56.579Z,1513235036.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:56.610Z,1513235036.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:56.966Z,1513235036.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:57.002Z,1513235037.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:57.028Z,1513235037.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:57.373Z,1513235037.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:57.388Z,1513235037.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:57.453Z,1513235037.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:57.772Z,1513235037.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:57.787Z,1513235037.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:58.173Z,1513235038.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:58.188Z,1513235038.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:58.249Z,1513235038.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:58.581Z,1513235038.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:58.596Z,1513235038.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:58.984Z,1513235038.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:59.020Z,1513235039.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:59.054Z,1513235039.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:59.378Z,1513235039.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:59.392Z,1513235039.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:03:59.457Z,1513235039.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:59.774Z,1513235039.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:03:59.788Z,1513235039.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:00.175Z,1513235040.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:00.195Z,1513235040.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:00.253Z,1513235040.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:01.037Z,1513235041.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:01.833Z,1513235041.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:02.630Z,1513235042.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:03.033Z,1513235043.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:03.674Z,1513235043.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:03.776Z,1513235043.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:03.921Z,1513235043.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:03.963Z,1513235043.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:04.323Z,1513235044.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:04.343Z,1513235044.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:04.719Z,1513235044.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:04.809Z,1513235044.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:05.121Z,1513235045.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:05.136Z,1513235045.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:05.508Z,1513235045.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:05.565Z,1513235045.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:05.825Z,1513235045.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:05.910Z,1513235045.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:05.924Z,1513235045.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:06.305Z,1513235046.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:06.336Z,1513235046.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:06.622Z,1513235046.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:06.721Z,1513235046.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:06.740Z,1513235046.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:07.025Z,1513235047.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:07.123Z,1513235047.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:07.137Z,1513235047.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:07.521Z,1513235047.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:07.537Z,1513235047.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:07.821Z,1513235047.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:07.899Z,1513235047.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:07.930Z,1513235047.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:08.299Z,1513235048.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:08.336Z,1513235048.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:08.618Z,1513235048.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:08.700Z,1513235048.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:08.731Z,1513235048.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:09.057Z,1513235049.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:09.099Z,1513235049.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:09.135Z,1513235049.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:09.528Z,1513235049.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:09.543Z,1513235049.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:09.854Z,1513235049.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:09.924Z,1513235049.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:09.956Z,1513235049.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:10.332Z,1513235050.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:10.348Z,1513235050.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:10.649Z,1513235050.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:10.716Z,1513235050.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:10.758Z,1513235050.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:11.100Z,1513235051.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:11.127Z,1513235051.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:11.345Z,1513235051.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:11.507Z,1513235051.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:11.521Z,1513235051.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:11.913Z,1513235051.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:11.927Z,1513235051.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:12.141Z,1513235052.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:12.310Z,1513235052.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:12.328Z,1513235052.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:12.717Z,1513235052.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:12.732Z,1513235052.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:12.937Z,1513235052.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:13.119Z,1513235053.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:13.174Z,1513235053.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:13.349Z,1513235053.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:13.522Z,1513235053.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:13.537Z,1513235053.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:13.903Z,1513235053.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:13.962Z,1513235053.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:14.145Z,1513235054.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:14.308Z,1513235054.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:14.322Z,1513235054.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:14.714Z,1513235054.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:14.729Z,1513235054.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:14.941Z,1513235054.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:15.103Z,1513235055.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:15.135Z,1513235055.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:15.345Z,1513235055.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:15.522Z,1513235055.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:15.543Z,1513235055.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:15.924Z,1513235055.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:15.947Z,1513235055.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:16.142Z,1513235056.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:16.366Z,1513235056.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:16.400Z,1513235056.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:16.697Z,1513235056.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:16.728Z,1513235056.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:16.937Z,1513235056.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:17.114Z,1513235057.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:17.136Z,1513235057.136 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:17.136Z,1513235057.136 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131
2017-12-14T07:04:17.136Z,1513235057.136 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:04:17.138Z,1513235057.138 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:17.138Z,1513235057.138 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 131
2017-12-14T07:04:17.138Z,1513235057.138 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:04:17.140Z,1513235057.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:17.140Z,1513235057.140 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2017-12-14T07:04:17.140Z,1513235057.140 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:04:17.153Z,1513235057.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:04:17.153Z,1513235057.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:04:17.154Z,1513235057.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:04:17.341Z,1513235057.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:17.524Z,1513235057.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:17.550Z,1513235057.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:04:17.550Z,1513235057.550 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131
2017-12-14T07:04:17.550Z,1513235057.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:04:17.550Z,1513235057.550 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 131
2017-12-14T07:04:17.551Z,1513235057.551 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:04:17.551Z,1513235057.551 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2017-12-14T07:04:17.906Z,1513235057.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:17.944Z,1513235057.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:04:17.944Z,1513235057.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:04:17.945Z,1513235057.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:04:17.946Z,1513235057.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:04:17.946Z,1513235057.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:04:17.946Z,1513235057.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:04:17.947Z,1513235057.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:04:17.947Z,1513235057.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:04:17.947Z,1513235057.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:04:18.299Z,1513235058.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:18.316Z,1513235058.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:18.719Z,1513235058.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:18.741Z,1513235058.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:19.123Z,1513235059.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:19.151Z,1513235059.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:19.538Z,1513235059.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:19.563Z,1513235059.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:19.908Z,1513235059.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:19.924Z,1513235059.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:20.307Z,1513235060.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:20.322Z,1513235060.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:20.708Z,1513235060.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:20.723Z,1513235060.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:21.110Z,1513235061.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:21.124Z,1513235061.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:21.513Z,1513235061.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:21.528Z,1513235061.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:21.923Z,1513235061.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:21.956Z,1513235061.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:22.318Z,1513235062.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:22.333Z,1513235062.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:22.720Z,1513235062.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:22.776Z,1513235062.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:23.102Z,1513235063.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:23.134Z,1513235063.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:23.509Z,1513235063.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:23.531Z,1513235063.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:23.919Z,1513235063.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:23.933Z,1513235063.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:24.306Z,1513235064.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:24.328Z,1513235064.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:24.722Z,1513235064.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:24.743Z,1513235064.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:25.121Z,1513235065.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:25.140Z,1513235065.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:25.521Z,1513235065.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:25.536Z,1513235065.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:25.899Z,1513235065.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:25.988Z,1513235065.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:26.311Z,1513235066.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:26.398Z,1513235066.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:26.700Z,1513235066.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:26.716Z,1513235066.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:27.108Z,1513235067.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:27.178Z,1513235067.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:27.521Z,1513235067.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:27.551Z,1513235067.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:27.918Z,1513235067.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:27.956Z,1513235067.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:28.321Z,1513235068.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:28.347Z,1513235068.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:28.708Z,1513235068.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:28.723Z,1513235068.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:29.109Z,1513235069.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:29.165Z,1513235069.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:29.517Z,1513235069.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:29.531Z,1513235069.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:29.912Z,1513235069.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:29.927Z,1513235069.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:30.297Z,1513235070.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:30.327Z,1513235070.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:30.717Z,1513235070.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:30.731Z,1513235070.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:31.118Z,1513235071.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:31.139Z,1513235071.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:31.518Z,1513235071.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:31.532Z,1513235071.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:31.906Z,1513235071.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:31.928Z,1513235071.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:32.352Z,1513235072.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:32.396Z,1513235072.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:32.709Z,1513235072.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:32.723Z,1513235072.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:33.103Z,1513235073.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:33.130Z,1513235073.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:33.526Z,1513235073.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:33.540Z,1513235073.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:33.922Z,1513235073.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:33.949Z,1513235073.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:34.323Z,1513235074.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:34.338Z,1513235074.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:34.699Z,1513235074.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:34.730Z,1513235074.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:35.099Z,1513235075.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:35.130Z,1513235075.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:35.521Z,1513235075.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:35.548Z,1513235075.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:35.912Z,1513235075.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:35.942Z,1513235075.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:36.296Z,1513235076.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:36.351Z,1513235076.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:36.709Z,1513235076.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:36.744Z,1513235076.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:37.117Z,1513235077.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:37.146Z,1513235077.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:37.518Z,1513235077.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:37.548Z,1513235077.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:37.899Z,1513235077.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:37.919Z,1513235077.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:38.304Z,1513235078.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:38.319Z,1513235078.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:38.754Z,1513235078.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:38.801Z,1513235078.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:39.099Z,1513235079.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:39.119Z,1513235079.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:39.517Z,1513235079.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:39.544Z,1513235079.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:39.923Z,1513235079.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:39.947Z,1513235079.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:40.312Z,1513235080.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:40.349Z,1513235080.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:40.708Z,1513235080.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:40.723Z,1513235080.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:41.108Z,1513235081.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:41.151Z,1513235081.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:41.508Z,1513235081.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:41.528Z,1513235081.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:41.906Z,1513235081.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:41.929Z,1513235081.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:42.308Z,1513235082.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:42.331Z,1513235082.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:42.717Z,1513235082.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:42.732Z,1513235082.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:43.118Z,1513235083.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:43.132Z,1513235083.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:43.520Z,1513235083.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:43.535Z,1513235083.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:43.910Z,1513235083.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:43.926Z,1513235083.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:44.312Z,1513235084.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:44.328Z,1513235084.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:44.721Z,1513235084.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:44.735Z,1513235084.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:45.120Z,1513235085.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:45.156Z,1513235085.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:45.533Z,1513235085.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:45.549Z,1513235085.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:45.919Z,1513235085.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:45.942Z,1513235085.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:46.318Z,1513235086.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:46.347Z,1513235086.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:46.706Z,1513235086.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:46.721Z,1513235086.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:47.108Z,1513235087.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:47.123Z,1513235087.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:47.510Z,1513235087.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:47.524Z,1513235087.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:47.909Z,1513235087.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:47.924Z,1513235087.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:48.326Z,1513235088.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:48.415Z,1513235088.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:48.709Z,1513235088.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:48.744Z,1513235088.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:49.121Z,1513235089.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:49.183Z,1513235089.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:49.522Z,1513235089.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:49.536Z,1513235089.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:49.899Z,1513235089.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:49.947Z,1513235089.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:50.303Z,1513235090.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:50.340Z,1513235090.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:50.700Z,1513235090.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:50.736Z,1513235090.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:51.111Z,1513235091.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:51.136Z,1513235091.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:51.521Z,1513235091.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:51.542Z,1513235091.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:51.923Z,1513235091.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:51.938Z,1513235091.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:52.312Z,1513235092.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:52.338Z,1513235092.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:52.700Z,1513235092.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:52.731Z,1513235092.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:53.127Z,1513235093.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:53.148Z,1513235093.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:53.507Z,1513235093.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:53.535Z,1513235093.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:53.904Z,1513235093.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:53.935Z,1513235093.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:54.304Z,1513235094.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:54.339Z,1513235094.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:54.748Z,1513235094.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:54.812Z,1513235094.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:55.121Z,1513235095.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:55.148Z,1513235095.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:55.518Z,1513235095.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:55.545Z,1513235095.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:55.905Z,1513235095.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:55.920Z,1513235095.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:56.302Z,1513235096.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:56.318Z,1513235096.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:56.704Z,1513235096.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:56.719Z,1513235096.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:57.111Z,1513235097.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:57.151Z,1513235097.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:57.518Z,1513235097.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:57.558Z,1513235097.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:57.919Z,1513235097.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:57.958Z,1513235097.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:58.312Z,1513235098.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:58.367Z,1513235098.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:58.708Z,1513235098.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:58.723Z,1513235098.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:59.103Z,1513235099.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:59.126Z,1513235099.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:59.510Z,1513235099.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:59.525Z,1513235099.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:04:59.913Z,1513235099.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:04:59.928Z,1513235099.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:00.312Z,1513235100.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:00.328Z,1513235100.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:03.761Z,1513235103.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:03.776Z,1513235103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:03.779Z,1513235103.779 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:00:03.5Z
2017-12-14T07:05:03.779Z,1513235103.779 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:05:03.779Z,1513235103.779 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:05:03.889Z,1513235103.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:03.935Z,1513235103.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:04.842Z,1513235104.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:04.865Z,1513235104.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:04.980Z,1513235104.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:05.022Z,1513235105.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:05.319Z,1513235105.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:05.334Z,1513235105.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:05.720Z,1513235105.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:05.736Z,1513235105.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:09.360Z,1513235109.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:09.383Z,1513235109.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:09.457Z,1513235109.457 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0152.lzma
2017-12-14T07:05:09.490Z,1513235109.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:09.535Z,1513235109.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:09.872Z,1513235109.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:09.887Z,1513235109.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:10.227Z,1513235110.227 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0152.lzma.bak
2017-12-14T07:05:10.227Z,1513235110.227 [DataOverHttps](INFO): SBD MOMSN=5438220
2017-12-14T07:05:10.282Z,1513235110.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:10.348Z,1513235110.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:11.513Z,1513235111.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:11.528Z,1513235111.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:11.640Z,1513235111.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:11.699Z,1513235111.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:15.282Z,1513235115.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:15.297Z,1513235115.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:15.405Z,1513235115.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:15.474Z,1513235115.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:15.786Z,1513235115.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:15.800Z,1513235115.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:16.187Z,1513235116.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:16.201Z,1513235116.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:16.626Z,1513235116.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:16.654Z,1513235116.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:16.975Z,1513235116.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:17.002Z,1513235117.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:20.588Z,1513235120.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:20.675Z,1513235120.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:20.766Z,1513235120.766 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20171214T002839/Express0153.lzma
2017-12-14T07:05:20.806Z,1513235120.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:20.820Z,1513235120.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:21.146Z,1513235121.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:21.182Z,1513235121.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:21.507Z,1513235121.507 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0153.lzma.bak
2017-12-14T07:05:21.507Z,1513235121.507 [DataOverHttps](INFO): SBD MOMSN=5438222
2017-12-14T07:05:21.532Z,1513235121.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:21.589Z,1513235121.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:44.831Z,1513235144.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:44.883Z,1513235144.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:44.886Z,1513235144.886 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:05:44.886Z,1513235144.886 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:05:44.886Z,1513235144.886 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:05:44.984Z,1513235144.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:45.033Z,1513235145.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:48.399Z,1513235148.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:48.415Z,1513235148.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:48.552Z,1513235148.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:48.591Z,1513235148.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:48.972Z,1513235148.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:49.004Z,1513235149.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:49.316Z,1513235149.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:49.331Z,1513235149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:49.709Z,1513235149.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:49.724Z,1513235149.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:50.106Z,1513235150.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:50.129Z,1513235150.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:50.483Z,1513235150.483 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T07:05:50.483Z,1513235150.483 [NAL9602] Data Fault, FailCount= 1
2017-12-14T07:05:50.483Z,1513235150.483 [NAL9602](ERROR): Data Fault
2017-12-14T07:05:50.500Z,1513235150.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:50.537Z,1513235150.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:50.550Z,1513235150.550 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T07:05:50.939Z,1513235150.939 [NAL9602](INFO): Powering down
2017-12-14T07:05:50.976Z,1513235150.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:51.016Z,1513235151.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:51.302Z,1513235151.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:51.336Z,1513235151.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:51.733Z,1513235151.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:51.774Z,1513235151.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:51.798Z,1513235151.798 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T07:05:51.798Z,1513235151.798 [NAL9602] No Fault, FailCount= 1
2017-12-14T07:05:52.099Z,1513235152.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:52.127Z,1513235152.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:52.500Z,1513235152.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:52.527Z,1513235152.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:52.900Z,1513235152.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:52.915Z,1513235152.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:53.304Z,1513235153.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:53.319Z,1513235153.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:53.707Z,1513235153.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:53.721Z,1513235153.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:54.106Z,1513235154.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:54.120Z,1513235154.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:54.507Z,1513235154.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:54.522Z,1513235154.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:54.937Z,1513235154.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:54.980Z,1513235154.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:55.299Z,1513235155.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:55.332Z,1513235155.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:55.702Z,1513235155.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:55.732Z,1513235155.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:56.098Z,1513235156.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:56.126Z,1513235156.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:56.502Z,1513235156.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:56.592Z,1513235156.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:56.909Z,1513235156.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:56.924Z,1513235156.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:57.304Z,1513235157.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:57.379Z,1513235157.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:57.705Z,1513235157.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:57.719Z,1513235157.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:58.138Z,1513235158.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:58.215Z,1513235158.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:58.507Z,1513235158.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:58.522Z,1513235158.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:58.898Z,1513235158.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:58.943Z,1513235158.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:59.316Z,1513235159.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:59.331Z,1513235159.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:05:59.699Z,1513235159.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:05:59.733Z,1513235159.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:00.117Z,1513235160.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:00.131Z,1513235160.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:00.497Z,1513235160.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:00.532Z,1513235160.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:00.899Z,1513235160.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:00.934Z,1513235160.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:01.339Z,1513235161.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:01.354Z,1513235161.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:01.692Z,1513235161.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:01.716Z,1513235161.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:02.107Z,1513235162.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:02.127Z,1513235162.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:02.501Z,1513235162.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:02.516Z,1513235162.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:03.012Z,1513235163.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:03.042Z,1513235163.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:03.312Z,1513235163.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:03.335Z,1513235163.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:03.711Z,1513235163.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:03.726Z,1513235163.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:04.111Z,1513235164.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:04.127Z,1513235164.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:04.548Z,1513235164.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:04.563Z,1513235164.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:04.979Z,1513235164.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:04.996Z,1513235164.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:05.302Z,1513235165.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:05.328Z,1513235165.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:05.698Z,1513235165.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:05.723Z,1513235165.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:06.103Z,1513235166.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:06.129Z,1513235166.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:06.503Z,1513235166.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:06.572Z,1513235166.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:06.898Z,1513235166.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:06.923Z,1513235166.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:07.298Z,1513235167.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:07.341Z,1513235167.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:07.749Z,1513235167.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:07.793Z,1513235167.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:08.099Z,1513235168.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:08.143Z,1513235168.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:08.503Z,1513235168.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:08.572Z,1513235168.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:08.906Z,1513235168.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:08.922Z,1513235168.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:09.303Z,1513235169.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:09.335Z,1513235169.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:09.707Z,1513235169.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:09.722Z,1513235169.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:10.104Z,1513235170.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:10.119Z,1513235170.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:10.503Z,1513235170.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:10.517Z,1513235170.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:10.906Z,1513235170.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:10.945Z,1513235170.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:11.305Z,1513235171.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:11.337Z,1513235171.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:11.698Z,1513235171.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:11.714Z,1513235171.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:12.106Z,1513235172.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:12.144Z,1513235172.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:12.500Z,1513235172.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:12.515Z,1513235172.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:12.907Z,1513235172.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:12.956Z,1513235172.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:13.306Z,1513235173.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:13.321Z,1513235173.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:13.700Z,1513235173.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:13.715Z,1513235173.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:14.103Z,1513235174.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:14.170Z,1513235174.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:14.514Z,1513235174.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:14.529Z,1513235174.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:14.898Z,1513235174.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:14.935Z,1513235174.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:15.299Z,1513235175.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:15.330Z,1513235175.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:15.703Z,1513235175.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:15.738Z,1513235175.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:16.102Z,1513235176.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:16.118Z,1513235176.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:16.507Z,1513235176.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:16.549Z,1513235176.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:16.962Z,1513235176.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:16.995Z,1513235176.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:17.360Z,1513235177.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:17.400Z,1513235177.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:17.711Z,1513235177.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:17.747Z,1513235177.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:18.130Z,1513235178.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:18.227Z,1513235178.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:18.506Z,1513235178.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:18.522Z,1513235178.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:18.978Z,1513235178.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:19.002Z,1513235179.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:19.308Z,1513235179.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:19.355Z,1513235179.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:19.707Z,1513235179.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:19.767Z,1513235179.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:20.118Z,1513235180.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:20.175Z,1513235180.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:20.618Z,1513235180.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:20.661Z,1513235180.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:20.909Z,1513235180.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:20.934Z,1513235180.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:21.282Z,1513235181.282 [NAL9602](INFO): Powering up NAL9602
2017-12-14T07:06:21.314Z,1513235181.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:21.371Z,1513235181.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:21.700Z,1513235181.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:21.752Z,1513235181.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:22.112Z,1513235182.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:22.223Z,1513235182.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:22.500Z,1513235182.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:22.527Z,1513235182.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:22.899Z,1513235182.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:22.914Z,1513235182.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:23.310Z,1513235183.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:23.342Z,1513235183.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:23.707Z,1513235183.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:23.727Z,1513235183.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:24.114Z,1513235184.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:24.128Z,1513235184.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:24.500Z,1513235184.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:24.523Z,1513235184.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:24.904Z,1513235184.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:24.931Z,1513235184.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:25.310Z,1513235185.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:25.325Z,1513235185.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:25.707Z,1513235185.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:25.721Z,1513235185.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:26.102Z,1513235186.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:26.128Z,1513235186.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:26.498Z,1513235186.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:26.525Z,1513235186.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:26.899Z,1513235186.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:26.926Z,1513235186.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:27.298Z,1513235187.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:27.329Z,1513235187.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:27.698Z,1513235187.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:27.713Z,1513235187.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:28.096Z,1513235188.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:28.111Z,1513235188.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:28.530Z,1513235188.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:28.558Z,1513235188.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:28.903Z,1513235188.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:28.938Z,1513235188.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:29.307Z,1513235189.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:29.323Z,1513235189.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:29.702Z,1513235189.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:29.728Z,1513235189.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:30.102Z,1513235190.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:30.128Z,1513235190.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:30.499Z,1513235190.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:30.551Z,1513235190.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:30.959Z,1513235190.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:30.982Z,1513235190.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:31.301Z,1513235191.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:31.353Z,1513235191.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:31.708Z,1513235191.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:31.739Z,1513235191.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:32.121Z,1513235192.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:32.208Z,1513235192.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:32.488Z,1513235192.488 [NAL9602](INFO): NAL9602 initialized
2017-12-14T07:06:32.506Z,1513235192.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:32.521Z,1513235192.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:32.960Z,1513235192.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:33.020Z,1513235193.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:33.352Z,1513235193.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:33.379Z,1513235193.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:33.729Z,1513235193.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:33.745Z,1513235193.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:34.124Z,1513235194.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:34.139Z,1513235194.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:34.498Z,1513235194.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:34.583Z,1513235194.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:34.924Z,1513235194.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:34.950Z,1513235194.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:35.304Z,1513235195.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:35.320Z,1513235195.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:35.714Z,1513235195.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:35.855Z,1513235195.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:36.117Z,1513235196.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:36.132Z,1513235196.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:36.566Z,1513235196.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:36.643Z,1513235196.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:36.906Z,1513235196.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:36.933Z,1513235196.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:37.302Z,1513235197.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:37.317Z,1513235197.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:37.703Z,1513235197.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:37.719Z,1513235197.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:38.118Z,1513235198.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:38.155Z,1513235198.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:38.507Z,1513235198.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:38.521Z,1513235198.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:38.929Z,1513235198.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:38.958Z,1513235198.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:39.314Z,1513235199.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:39.329Z,1513235199.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:39.712Z,1513235199.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:39.731Z,1513235199.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:40.109Z,1513235200.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:40.124Z,1513235200.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:40.554Z,1513235200.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:40.630Z,1513235200.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:40.904Z,1513235200.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:40.931Z,1513235200.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:41.303Z,1513235201.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:41.330Z,1513235201.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:41.710Z,1513235201.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:41.726Z,1513235201.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:42.121Z,1513235202.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:42.164Z,1513235202.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:42.526Z,1513235202.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:42.563Z,1513235202.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:42.899Z,1513235202.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:42.975Z,1513235202.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:43.316Z,1513235203.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:43.420Z,1513235203.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:43.705Z,1513235203.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:43.754Z,1513235203.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:44.113Z,1513235204.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:44.162Z,1513235204.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:44.508Z,1513235204.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:44.527Z,1513235204.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:44.971Z,1513235204.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:45.027Z,1513235205.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:45.322Z,1513235205.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:45.360Z,1513235205.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:50.529Z,1513235210.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:50.662Z,1513235210.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:50.763Z,1513235210.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:50.804Z,1513235210.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:51.139Z,1513235211.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:51.187Z,1513235211.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:51.540Z,1513235211.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:51.608Z,1513235211.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:51.941Z,1513235211.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:51.963Z,1513235211.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:52.347Z,1513235212.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:52.362Z,1513235212.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:52.780Z,1513235212.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:52.796Z,1513235212.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:53.152Z,1513235213.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:53.236Z,1513235213.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:53.560Z,1513235213.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:53.590Z,1513235213.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:53.951Z,1513235213.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:54.006Z,1513235214.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:54.336Z,1513235214.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:54.379Z,1513235214.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:54.784Z,1513235214.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:54.828Z,1513235214.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:55.162Z,1513235215.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:55.195Z,1513235215.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:55.578Z,1513235215.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:55.643Z,1513235215.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:56.022Z,1513235216.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:56.090Z,1513235216.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:56.353Z,1513235216.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:56.407Z,1513235216.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:56.742Z,1513235216.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:56.799Z,1513235216.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:57.150Z,1513235217.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:57.237Z,1513235217.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:57.553Z,1513235217.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:57.595Z,1513235217.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:57.950Z,1513235217.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:58.003Z,1513235218.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:58.352Z,1513235218.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:58.382Z,1513235218.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:58.737Z,1513235218.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:58.792Z,1513235218.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:59.135Z,1513235219.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:59.183Z,1513235219.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:59.548Z,1513235219.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:06:59.584Z,1513235219.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:06:59.951Z,1513235219.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:00.035Z,1513235220.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:00.348Z,1513235220.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:00.423Z,1513235220.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:00.739Z,1513235220.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:00.788Z,1513235220.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:01.143Z,1513235221.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:01.187Z,1513235221.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:01.556Z,1513235221.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:01.603Z,1513235221.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:01.982Z,1513235221.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:02.036Z,1513235222.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:02.356Z,1513235222.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:02.399Z,1513235222.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:02.749Z,1513235222.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:02.839Z,1513235222.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:03.151Z,1513235223.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:03.200Z,1513235223.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:03.561Z,1513235223.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:03.623Z,1513235223.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:03.965Z,1513235223.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:04.006Z,1513235224.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:04.358Z,1513235224.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:04.414Z,1513235224.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:04.737Z,1513235224.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:04.809Z,1513235224.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:05.162Z,1513235225.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:05.251Z,1513235225.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:05.583Z,1513235225.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:05.651Z,1513235225.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:06.010Z,1513235226.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:06.089Z,1513235226.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:06.357Z,1513235226.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:06.408Z,1513235226.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:06.737Z,1513235226.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:06.814Z,1513235226.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:07.180Z,1513235227.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:07.224Z,1513235227.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:07.559Z,1513235227.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:07.615Z,1513235227.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:07.962Z,1513235227.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:07.988Z,1513235227.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:08.361Z,1513235228.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:08.451Z,1513235228.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:08.742Z,1513235228.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:08.791Z,1513235228.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:09.156Z,1513235229.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:09.267Z,1513235229.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:09.548Z,1513235229.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:09.592Z,1513235229.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:09.956Z,1513235229.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:09.991Z,1513235229.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:10.383Z,1513235230.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:10.436Z,1513235230.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:10.735Z,1513235230.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:10.763Z,1513235230.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:11.135Z,1513235231.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:11.162Z,1513235231.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:11.539Z,1513235231.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:11.578Z,1513235231.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:11.941Z,1513235231.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:11.978Z,1513235231.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:12.339Z,1513235232.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:12.375Z,1513235232.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:12.744Z,1513235232.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:12.775Z,1513235232.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:13.160Z,1513235233.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:13.183Z,1513235233.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:13.560Z,1513235233.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:13.585Z,1513235233.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:13.935Z,1513235233.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:13.968Z,1513235233.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:14.329Z,1513235234.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:14.343Z,1513235234.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:14.736Z,1513235234.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:14.751Z,1513235234.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:15.174Z,1513235235.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:15.194Z,1513235235.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:15.588Z,1513235235.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:15.673Z,1513235235.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:15.954Z,1513235235.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:15.991Z,1513235235.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:16.355Z,1513235236.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:16.382Z,1513235236.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:16.745Z,1513235236.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:16.767Z,1513235236.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.146Z,1513235237.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:17.162Z,1513235237.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.550Z,1513235237.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:17.565Z,1513235237.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.954Z,1513235237.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:17.995Z,1513235237.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.995Z,1513235237.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132
2017-12-14T07:07:17.995Z,1513235237.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:07:17.997Z,1513235237.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.997Z,1513235237.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 132
2017-12-14T07:07:17.997Z,1513235237.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:07:17.999Z,1513235237.999 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:17.999Z,1513235237.999 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2017-12-14T07:07:17.999Z,1513235237.999 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:07:18.011Z,1513235238.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:07:18.011Z,1513235238.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:07:18.011Z,1513235238.011 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:07:18.355Z,1513235238.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:18.409Z,1513235238.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:07:18.410Z,1513235238.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132
2017-12-14T07:07:18.410Z,1513235238.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:07:18.410Z,1513235238.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 132
2017-12-14T07:07:18.411Z,1513235238.411 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:07:18.411Z,1513235238.411 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2017-12-14T07:07:18.807Z,1513235238.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:18.832Z,1513235238.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:07:18.833Z,1513235238.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:07:18.833Z,1513235238.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:07:18.833Z,1513235238.833 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:07:18.834Z,1513235238.834 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:07:18.834Z,1513235238.834 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:07:18.835Z,1513235238.835 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:07:18.835Z,1513235238.835 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:07:18.835Z,1513235238.835 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:07:19.135Z,1513235239.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:19.172Z,1513235239.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:19.558Z,1513235239.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:19.593Z,1513235239.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:19.967Z,1513235239.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:19.988Z,1513235239.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:20.346Z,1513235240.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:20.372Z,1513235240.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:20.736Z,1513235240.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:20.752Z,1513235240.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:21.139Z,1513235241.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:21.182Z,1513235241.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:21.598Z,1513235241.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:21.635Z,1513235241.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:21.966Z,1513235241.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:22.003Z,1513235242.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:22.354Z,1513235242.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:22.387Z,1513235242.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:22.739Z,1513235242.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:22.774Z,1513235242.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:23.142Z,1513235243.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:23.165Z,1513235243.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:23.550Z,1513235243.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:23.566Z,1513235243.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:23.954Z,1513235243.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:23.969Z,1513235243.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:24.350Z,1513235244.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:24.365Z,1513235244.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:24.738Z,1513235244.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:24.754Z,1513235244.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:25.132Z,1513235245.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:25.167Z,1513235245.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:25.378Z,1513235245.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:25.550Z,1513235245.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:25.566Z,1513235245.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:25.946Z,1513235245.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:25.961Z,1513235245.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:26.173Z,1513235246.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:26.350Z,1513235246.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:26.373Z,1513235246.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:26.823Z,1513235246.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:26.853Z,1513235246.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:27.136Z,1513235247.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:27.168Z,1513235247.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:27.547Z,1513235247.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:27.634Z,1513235247.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:27.954Z,1513235247.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:27.987Z,1513235247.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:28.369Z,1513235248.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:28.435Z,1513235248.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:28.743Z,1513235248.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:28.758Z,1513235248.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:29.144Z,1513235249.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:29.210Z,1513235249.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:29.555Z,1513235249.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:29.588Z,1513235249.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:29.953Z,1513235249.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:29.983Z,1513235249.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:30.342Z,1513235250.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:30.387Z,1513235250.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:30.748Z,1513235250.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:30.763Z,1513235250.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:31.146Z,1513235251.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:31.167Z,1513235251.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:31.568Z,1513235251.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:31.613Z,1513235251.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:31.952Z,1513235251.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:31.971Z,1513235251.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:32.351Z,1513235252.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:32.366Z,1513235252.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:32.740Z,1513235252.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:32.782Z,1513235252.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:33.143Z,1513235253.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:33.180Z,1513235253.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:33.562Z,1513235253.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:33.577Z,1513235253.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:33.957Z,1513235253.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:33.995Z,1513235253.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:34.346Z,1513235254.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:34.391Z,1513235254.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:34.799Z,1513235254.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:34.844Z,1513235254.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:35.148Z,1513235255.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:35.190Z,1513235255.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:35.554Z,1513235255.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:35.603Z,1513235255.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:35.953Z,1513235255.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:35.987Z,1513235255.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:36.355Z,1513235256.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:36.402Z,1513235256.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:36.752Z,1513235256.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:36.791Z,1513235256.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:37.146Z,1513235257.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:37.160Z,1513235257.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:37.554Z,1513235257.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:37.627Z,1513235257.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:37.958Z,1513235257.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:38.010Z,1513235258.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:38.401Z,1513235258.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:38.416Z,1513235258.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:38.744Z,1513235258.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:38.792Z,1513235258.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:39.139Z,1513235259.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:39.179Z,1513235259.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:39.546Z,1513235259.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:39.561Z,1513235259.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:39.947Z,1513235259.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:39.962Z,1513235259.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:40.350Z,1513235260.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:40.371Z,1513235260.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:40.754Z,1513235260.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:40.777Z,1513235260.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:41.168Z,1513235261.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:41.207Z,1513235261.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:41.558Z,1513235261.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:41.574Z,1513235261.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:42.006Z,1513235262.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:42.020Z,1513235262.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:42.329Z,1513235262.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:42.375Z,1513235262.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:42.746Z,1513235262.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:42.761Z,1513235262.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:43.156Z,1513235263.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:43.171Z,1513235263.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:43.547Z,1513235263.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:43.580Z,1513235263.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:43.961Z,1513235263.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:43.981Z,1513235263.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:44.401Z,1513235264.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:44.428Z,1513235264.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:44.736Z,1513235264.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:44.800Z,1513235264.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:45.136Z,1513235265.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:45.175Z,1513235265.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:45.585Z,1513235265.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:45.617Z,1513235265.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:49.255Z,1513235269.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:49.315Z,1513235269.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:49.422Z,1513235269.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:49.486Z,1513235269.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:49.779Z,1513235269.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:49.795Z,1513235269.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:50.188Z,1513235270.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:50.203Z,1513235270.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:50.627Z,1513235270.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:50.673Z,1513235270.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:50.992Z,1513235270.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:51.007Z,1513235271.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:51.388Z,1513235271.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:51.435Z,1513235271.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:51.787Z,1513235271.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:51.807Z,1513235271.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:52.188Z,1513235272.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:52.204Z,1513235272.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:52.636Z,1513235272.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:52.695Z,1513235272.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:52.989Z,1513235272.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:53.003Z,1513235273.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:53.387Z,1513235273.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:53.402Z,1513235273.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:53.791Z,1513235273.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:53.806Z,1513235273.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:54.191Z,1513235274.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:54.206Z,1513235274.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:54.591Z,1513235274.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:54.607Z,1513235274.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:54.992Z,1513235274.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:55.009Z,1513235275.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:55.394Z,1513235275.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:55.409Z,1513235275.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:55.775Z,1513235275.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:55.795Z,1513235275.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:56.174Z,1513235276.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:56.189Z,1513235276.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:56.576Z,1513235276.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:56.613Z,1513235276.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:56.994Z,1513235276.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:57.010Z,1513235277.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:57.375Z,1513235277.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:57.403Z,1513235277.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:57.794Z,1513235277.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:57.808Z,1513235277.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:58.203Z,1513235278.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:58.218Z,1513235278.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:58.642Z,1513235278.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:58.664Z,1513235278.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:58.991Z,1513235278.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:59.018Z,1513235279.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:59.376Z,1513235279.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:59.404Z,1513235279.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:07:59.777Z,1513235279.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:07:59.849Z,1513235279.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:00.221Z,1513235280.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:00.256Z,1513235280.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:00.625Z,1513235280.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:00.668Z,1513235280.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:00.997Z,1513235280.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:01.028Z,1513235281.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:01.396Z,1513235281.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:01.420Z,1513235281.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:01.780Z,1513235281.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:01.797Z,1513235281.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:02.180Z,1513235282.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:02.197Z,1513235282.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:02.632Z,1513235282.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:02.647Z,1513235282.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:02.986Z,1513235282.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:03.003Z,1513235283.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:03.418Z,1513235283.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:03.446Z,1513235283.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:03.786Z,1513235283.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:03.807Z,1513235283.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:04.190Z,1513235284.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:04.205Z,1513235284.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:04.633Z,1513235284.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:04.649Z,1513235284.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:04.982Z,1513235284.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:05.000Z,1513235285.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:05.383Z,1513235285.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:05.448Z,1513235285.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:05.786Z,1513235285.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:05.801Z,1513235285.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:06.186Z,1513235286.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:06.200Z,1513235286.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:06.682Z,1513235286.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:06.723Z,1513235286.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:07.006Z,1513235287.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:07.023Z,1513235287.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:07.401Z,1513235287.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:07.416Z,1513235287.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:07.775Z,1513235287.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:07.802Z,1513235287.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:08.179Z,1513235288.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:08.211Z,1513235288.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:08.575Z,1513235288.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:08.607Z,1513235288.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:09.004Z,1513235289.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:09.019Z,1513235289.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:09.375Z,1513235289.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:09.411Z,1513235289.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:09.798Z,1513235289.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:09.813Z,1513235289.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:10.190Z,1513235290.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:10.224Z,1513235290.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:10.590Z,1513235290.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:10.623Z,1513235290.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:10.976Z,1513235290.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:11.023Z,1513235291.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:11.384Z,1513235291.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:11.420Z,1513235291.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:11.780Z,1513235291.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:11.831Z,1513235291.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:12.180Z,1513235292.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:12.195Z,1513235292.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:12.637Z,1513235292.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:12.691Z,1513235292.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:13.045Z,1513235293.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:13.078Z,1513235293.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:13.398Z,1513235293.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:13.452Z,1513235293.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:13.781Z,1513235293.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:13.796Z,1513235293.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:14.181Z,1513235294.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:14.197Z,1513235294.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:14.626Z,1513235294.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:14.651Z,1513235294.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:14.983Z,1513235294.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:14.998Z,1513235294.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:15.382Z,1513235295.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:15.403Z,1513235295.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:15.786Z,1513235295.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:15.807Z,1513235295.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:16.231Z,1513235296.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:16.289Z,1513235296.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:16.631Z,1513235296.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:16.649Z,1513235296.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:16.982Z,1513235296.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:16.000Z,1513235297.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:17.384Z,1513235297.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:17.399Z,1513235297.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:17.782Z,1513235297.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:17.801Z,1513235297.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:18.185Z,1513235298.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:18.200Z,1513235298.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:18.633Z,1513235298.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:18.648Z,1513235298.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:18.000Z,1513235299.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:19.037Z,1513235299.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:19.425Z,1513235299.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:19.455Z,1513235299.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:19.783Z,1513235299.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:19.803Z,1513235299.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:20.186Z,1513235300.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:20.201Z,1513235300.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:20.632Z,1513235300.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:20.687Z,1513235300.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:20.992Z,1513235300.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:21.007Z,1513235301.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:21.390Z,1513235301.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:21.404Z,1513235301.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:21.802Z,1513235301.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:21.865Z,1513235301.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:22.190Z,1513235302.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:22.228Z,1513235302.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:22.629Z,1513235302.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:22.648Z,1513235302.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:22.983Z,1513235302.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:22.998Z,1513235302.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:23.386Z,1513235303.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:23.400Z,1513235303.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:23.785Z,1513235303.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:23.800Z,1513235303.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:24.183Z,1513235304.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:24.199Z,1513235304.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:24.589Z,1513235304.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:24.605Z,1513235304.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:24.998Z,1513235304.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:25.029Z,1513235305.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:25.390Z,1513235305.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:25.406Z,1513235305.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:25.816Z,1513235305.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:25.846Z,1513235305.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:26.182Z,1513235306.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:26.213Z,1513235306.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:26.622Z,1513235306.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:26.649Z,1513235306.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:26.984Z,1513235306.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:27.053Z,1513235307.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:27.383Z,1513235307.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:27.410Z,1513235307.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:27.790Z,1513235307.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:27.818Z,1513235307.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:28.194Z,1513235308.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:28.222Z,1513235308.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:28.628Z,1513235308.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:28.651Z,1513235308.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:29.018Z,1513235309.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:29.057Z,1513235309.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:29.376Z,1513235309.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:29.411Z,1513235309.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:29.781Z,1513235309.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:29.807Z,1513235309.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:30.180Z,1513235310.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:30.211Z,1513235310.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:30.627Z,1513235310.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:30.656Z,1513235310.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:31.000Z,1513235311.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:31.019Z,1513235311.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:31.386Z,1513235311.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:31.415Z,1513235311.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:31.776Z,1513235311.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:31.799Z,1513235311.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:32.251Z,1513235312.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:32.315Z,1513235312.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:32.620Z,1513235312.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:32.647Z,1513235312.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:32.983Z,1513235312.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:33.037Z,1513235313.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:33.378Z,1513235313.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:33.417Z,1513235313.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:33.792Z,1513235313.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:33.843Z,1513235313.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:34.195Z,1513235314.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:34.210Z,1513235314.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:34.630Z,1513235314.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:34.672Z,1513235314.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:34.981Z,1513235314.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:34.999Z,1513235314.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:35.380Z,1513235315.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:35.396Z,1513235315.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:35.784Z,1513235315.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:35.804Z,1513235315.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:36.187Z,1513235316.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:36.203Z,1513235316.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:36.590Z,1513235316.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:36.605Z,1513235316.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:36.992Z,1513235316.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:37.007Z,1513235317.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:37.389Z,1513235317.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:37.412Z,1513235317.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:37.788Z,1513235317.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:37.803Z,1513235317.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:38.181Z,1513235318.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:38.206Z,1513235318.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:38.624Z,1513235318.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:38.643Z,1513235318.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:38.989Z,1513235318.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:39.003Z,1513235319.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:39.386Z,1513235319.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:39.407Z,1513235319.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:39.788Z,1513235319.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:39.819Z,1513235319.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:40.199Z,1513235320.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:40.213Z,1513235320.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:40.624Z,1513235320.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:40.660Z,1513235320.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:40.991Z,1513235320.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:41.019Z,1513235321.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:41.383Z,1513235321.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:41.407Z,1513235321.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:41.836Z,1513235321.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:41.897Z,1513235321.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:42.187Z,1513235322.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:42.202Z,1513235322.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:42.638Z,1513235322.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:42.657Z,1513235322.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:42.998Z,1513235322.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:43.019Z,1513235323.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:43.397Z,1513235323.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:43.412Z,1513235323.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:43.789Z,1513235323.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:43.803Z,1513235323.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:44.190Z,1513235324.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:44.211Z,1513235324.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:44.618Z,1513235324.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:44.654Z,1513235324.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:45.008Z,1513235325.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:45.039Z,1513235325.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:45.375Z,1513235325.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:45.415Z,1513235325.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:45.794Z,1513235325.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:45.824Z,1513235325.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:49.289Z,1513235329.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:49.314Z,1513235329.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:49.434Z,1513235329.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:49.468Z,1513235329.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:49.769Z,1513235329.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:49.791Z,1513235329.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:50.180Z,1513235330.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:50.195Z,1513235330.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:50.574Z,1513235330.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:50.589Z,1513235330.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:50.973Z,1513235330.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:50.988Z,1513235330.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:51.404Z,1513235331.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:51.439Z,1513235331.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:51.782Z,1513235331.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:51.797Z,1513235331.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:52.182Z,1513235332.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:52.246Z,1513235332.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:52.589Z,1513235332.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:52.624Z,1513235332.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:52.967Z,1513235332.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:53.001Z,1513235333.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:53.363Z,1513235333.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:53.411Z,1513235333.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:53.765Z,1513235333.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:53.800Z,1513235333.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:54.167Z,1513235334.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:54.219Z,1513235334.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:54.651Z,1513235334.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:54.676Z,1513235334.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:54.977Z,1513235334.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:55.019Z,1513235335.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:55.374Z,1513235335.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:55.408Z,1513235335.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:55.772Z,1513235335.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:55.807Z,1513235335.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:56.164Z,1513235336.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:56.179Z,1513235336.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:56.614Z,1513235336.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:56.629Z,1513235336.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:56.982Z,1513235336.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:56.998Z,1513235336.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:57.378Z,1513235337.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:57.407Z,1513235337.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:57.777Z,1513235337.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:57.792Z,1513235337.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:58.164Z,1513235338.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:58.191Z,1513235338.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:58.636Z,1513235338.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:58.663Z,1513235338.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:58.992Z,1513235338.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:59.007Z,1513235339.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:59.382Z,1513235339.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:59.397Z,1513235339.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:08:59.763Z,1513235339.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:08:59.794Z,1513235339.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:00.163Z,1513235340.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:00.195Z,1513235340.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:00.638Z,1513235340.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:00.666Z,1513235340.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:00.993Z,1513235340.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:01.047Z,1513235341.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:01.374Z,1513235341.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:01.401Z,1513235341.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:01.763Z,1513235341.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:01.803Z,1513235341.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:02.167Z,1513235342.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:02.182Z,1513235342.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:02.606Z,1513235342.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:02.688Z,1513235342.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:02.985Z,1513235342.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:03.012Z,1513235343.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:03.385Z,1513235343.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:03.419Z,1513235343.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:03.826Z,1513235343.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:03.879Z,1513235343.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:04.181Z,1513235344.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:04.224Z,1513235344.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:04.579Z,1513235344.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:04.593Z,1513235344.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:04.974Z,1513235344.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:05.015Z,1513235345.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:05.375Z,1513235345.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:05.396Z,1513235345.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:05.779Z,1513235345.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:05.793Z,1513235345.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:06.177Z,1513235346.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:06.196Z,1513235346.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:06.578Z,1513235346.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:06.599Z,1513235346.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:06.977Z,1513235346.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:07.002Z,1513235347.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:07.388Z,1513235347.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:07.419Z,1513235347.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:07.772Z,1513235347.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:07.789Z,1513235347.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:08.173Z,1513235348.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:08.188Z,1513235348.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:08.610Z,1513235348.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:08.634Z,1513235348.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:09.010Z,1513235349.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:09.047Z,1513235349.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:09.077Z,1513235349.077 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:09:09.393Z,1513235349.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:09.415Z,1513235349.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:09.768Z,1513235349.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:09.803Z,1513235349.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:10.163Z,1513235350.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:10.200Z,1513235350.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:10.656Z,1513235350.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:10.701Z,1513235350.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:10.974Z,1513235350.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:10.992Z,1513235350.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:11.368Z,1513235351.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:11.395Z,1513235351.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:11.785Z,1513235351.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:11.800Z,1513235351.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:12.178Z,1513235352.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:12.194Z,1513235352.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:12.631Z,1513235352.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:12.671Z,1513235352.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:12.977Z,1513235352.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:12.995Z,1513235352.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:13.372Z,1513235353.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:13.440Z,1513235353.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:13.775Z,1513235353.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:13.790Z,1513235353.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:14.169Z,1513235354.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:14.215Z,1513235354.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:14.634Z,1513235354.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:14.669Z,1513235354.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:14.981Z,1513235354.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:15.024Z,1513235355.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:15.378Z,1513235355.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:15.415Z,1513235355.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:15.773Z,1513235355.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:15.795Z,1513235355.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:16.173Z,1513235356.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:16.190Z,1513235356.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:16.620Z,1513235356.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:16.676Z,1513235356.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:17.004Z,1513235357.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:17.031Z,1513235357.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:17.382Z,1513235357.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:17.398Z,1513235357.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:17.763Z,1513235357.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:17.789Z,1513235357.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:18.168Z,1513235358.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:18.191Z,1513235358.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:18.586Z,1513235358.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:18.600Z,1513235358.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:18.983Z,1513235358.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:19.003Z,1513235359.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:19.381Z,1513235359.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:19.400Z,1513235359.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:19.770Z,1513235359.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:19.790Z,1513235359.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:20.199Z,1513235360.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:20.221Z,1513235360.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:20.573Z,1513235360.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:20.587Z,1513235360.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:20.994Z,1513235360.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:21.019Z,1513235361.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:21.377Z,1513235361.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:21.392Z,1513235361.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:21.774Z,1513235361.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:21.795Z,1513235361.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:22.182Z,1513235362.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:22.205Z,1513235362.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:22.625Z,1513235362.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:22.651Z,1513235362.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:22.968Z,1513235362.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:23.005Z,1513235363.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:23.401Z,1513235363.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:23.460Z,1513235363.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:23.764Z,1513235363.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:23.808Z,1513235363.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:24.164Z,1513235364.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:24.200Z,1513235364.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:24.621Z,1513235364.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:24.660Z,1513235364.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:24.981Z,1513235364.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:25.012Z,1513235365.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:25.386Z,1513235365.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:25.416Z,1513235365.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:25.769Z,1513235365.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:25.784Z,1513235365.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:26.171Z,1513235366.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:26.186Z,1513235366.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:26.616Z,1513235366.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:26.667Z,1513235366.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:26.970Z,1513235366.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:27.003Z,1513235367.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:27.373Z,1513235367.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:27.387Z,1513235367.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:27.774Z,1513235367.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:27.789Z,1513235367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:28.178Z,1513235368.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:28.193Z,1513235368.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:28.627Z,1513235368.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:28.668Z,1513235368.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:28.974Z,1513235368.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:28.990Z,1513235368.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:29.370Z,1513235369.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:29.389Z,1513235369.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:29.773Z,1513235369.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:29.788Z,1513235369.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:30.176Z,1513235370.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:30.195Z,1513235370.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:30.602Z,1513235370.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:30.670Z,1513235370.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:30.983Z,1513235370.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:31.010Z,1513235371.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:31.374Z,1513235371.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:31.400Z,1513235371.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:31.764Z,1513235371.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:31.791Z,1513235371.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:32.160Z,1513235372.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:32.198Z,1513235372.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:32.582Z,1513235372.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:32.609Z,1513235372.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:32.999Z,1513235372.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:33.043Z,1513235373.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:33.378Z,1513235373.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:33.422Z,1513235373.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:33.763Z,1513235373.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:33.812Z,1513235373.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:34.191Z,1513235374.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:34.267Z,1513235374.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:34.577Z,1513235374.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:34.592Z,1513235374.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:34.974Z,1513235374.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:35.031Z,1513235375.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:35.364Z,1513235375.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:35.400Z,1513235375.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:35.788Z,1513235375.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:35.849Z,1513235375.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:36.182Z,1513235376.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:36.229Z,1513235376.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:36.625Z,1513235376.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:36.651Z,1513235376.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:36.963Z,1513235376.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:36.996Z,1513235376.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:37.363Z,1513235377.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:37.399Z,1513235377.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:37.769Z,1513235377.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:37.800Z,1513235377.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:38.163Z,1513235378.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:38.198Z,1513235378.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:38.632Z,1513235378.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:38.662Z,1513235378.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:38.981Z,1513235378.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:39.007Z,1513235379.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:39.432Z,1513235379.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:39.482Z,1513235379.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:39.762Z,1513235379.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:39.776Z,1513235379.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:40.171Z,1513235380.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:40.186Z,1513235380.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:40.618Z,1513235380.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:40.657Z,1513235380.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:40.964Z,1513235380.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:40.991Z,1513235380.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:41.363Z,1513235381.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:41.389Z,1513235381.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:41.787Z,1513235381.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:41.802Z,1513235381.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:42.188Z,1513235382.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:42.203Z,1513235382.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:42.644Z,1513235382.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:42.684Z,1513235382.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:42.963Z,1513235382.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:42.998Z,1513235382.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:43.363Z,1513235383.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:43.400Z,1513235383.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:43.763Z,1513235383.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:43.798Z,1513235383.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:44.167Z,1513235384.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:44.216Z,1513235384.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:44.574Z,1513235384.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:44.668Z,1513235384.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:44.978Z,1513235384.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:44.000Z,1513235385.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:45.378Z,1513235385.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:45.393Z,1513235385.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:45.772Z,1513235385.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:45.787Z,1513235385.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:46.183Z,1513235386.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:46.199Z,1513235386.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:49.676Z,1513235389.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:49.691Z,1513235389.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:49.802Z,1513235389.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:49.839Z,1513235389.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:50.158Z,1513235390.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:50.191Z,1513235390.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:50.624Z,1513235390.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:50.657Z,1513235390.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:50.968Z,1513235390.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:51.023Z,1513235391.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:51.339Z,1513235391.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:51.373Z,1513235391.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:51.764Z,1513235391.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:51.779Z,1513235391.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:52.166Z,1513235392.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:52.181Z,1513235392.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:52.571Z,1513235392.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:52.642Z,1513235392.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:52.947Z,1513235392.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:52.980Z,1513235392.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:53.347Z,1513235393.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:53.364Z,1513235393.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:53.744Z,1513235393.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:53.759Z,1513235393.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:54.149Z,1513235394.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:54.164Z,1513235394.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:54.613Z,1513235394.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:54.653Z,1513235394.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:54.960Z,1513235394.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:55.039Z,1513235395.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:55.361Z,1513235395.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:55.384Z,1513235395.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:55.750Z,1513235395.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:55.815Z,1513235395.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:56.158Z,1513235396.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:56.179Z,1513235396.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:56.612Z,1513235396.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:56.658Z,1513235396.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:56.968Z,1513235396.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:56.998Z,1513235396.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:57.358Z,1513235397.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:57.385Z,1513235397.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:57.791Z,1513235397.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:57.845Z,1513235397.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:58.137Z,1513235398.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:58.153Z,1513235398.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:58.558Z,1513235398.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:58.662Z,1513235398.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:58.972Z,1513235398.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:59.023Z,1513235399.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:59.371Z,1513235399.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:59.401Z,1513235399.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:09:59.752Z,1513235399.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:09:59.766Z,1513235399.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:00.151Z,1513235400.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:00.165Z,1513235400.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:00.557Z,1513235400.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:00.580Z,1513235400.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:00.980Z,1513235400.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:01.011Z,1513235401.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:01.364Z,1513235401.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:01.379Z,1513235401.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:01.744Z,1513235401.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:01.770Z,1513235401.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:02.166Z,1513235402.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:02.192Z,1513235402.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:02.562Z,1513235402.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:02.576Z,1513235402.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:02.984Z,1513235402.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:03.029Z,1513235403.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:03.365Z,1513235403.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:03.379Z,1513235403.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:03.739Z,1513235403.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:03.774Z,1513235403.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:04.143Z,1513235404.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:04.176Z,1513235404.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:04.601Z,1513235404.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:04.632Z,1513235404.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:04.964Z,1513235404.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:05.016Z,1513235405.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:05.369Z,1513235405.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:05.400Z,1513235405.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:05.748Z,1513235405.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:05.763Z,1513235405.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:06.151Z,1513235406.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:06.166Z,1513235406.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:06.610Z,1513235406.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:06.649Z,1513235406.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:06.963Z,1513235406.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:07.002Z,1513235407.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:07.362Z,1513235407.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:07.395Z,1513235407.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:07.750Z,1513235407.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:07.765Z,1513235407.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:08.148Z,1513235408.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:08.162Z,1513235408.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:08.624Z,1513235408.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:08.674Z,1513235408.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:08.987Z,1513235408.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:09.001Z,1513235409.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:09.358Z,1513235409.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:09.382Z,1513235409.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:09.746Z,1513235409.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:09.760Z,1513235409.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:10.140Z,1513235410.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:10.156Z,1513235410.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:10.611Z,1513235410.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:10.647Z,1513235410.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:10.961Z,1513235410.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:10.997Z,1513235410.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:11.362Z,1513235411.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:11.376Z,1513235411.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:11.752Z,1513235411.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:11.767Z,1513235411.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:12.152Z,1513235412.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:12.167Z,1513235412.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:12.555Z,1513235412.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:12.609Z,1513235412.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:12.977Z,1513235412.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:12.999Z,1513235412.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:13.363Z,1513235413.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:13.378Z,1513235413.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:13.744Z,1513235413.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:13.774Z,1513235413.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:14.140Z,1513235414.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:14.176Z,1513235414.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:14.567Z,1513235414.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:14.582Z,1513235414.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:14.986Z,1513235414.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:15.046Z,1513235415.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:15.349Z,1513235415.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:15.403Z,1513235415.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:15.743Z,1513235415.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:15.782Z,1513235415.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:16.140Z,1513235416.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:16.188Z,1513235416.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:16.554Z,1513235416.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:16.581Z,1513235416.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:16.991Z,1513235416.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:17.046Z,1513235417.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:17.359Z,1513235417.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:17.391Z,1513235417.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:17.740Z,1513235417.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:17.788Z,1513235417.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:18.140Z,1513235418.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:18.163Z,1513235418.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:18.572Z,1513235418.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:18.625Z,1513235418.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:19.030Z,1513235419.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:19.054Z,1513235419.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:19.055Z,1513235419.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133
2017-12-14T07:10:19.055Z,1513235419.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:10:19.056Z,1513235419.056 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:19.057Z,1513235419.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 133
2017-12-14T07:10:19.057Z,1513235419.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:10:19.059Z,1513235419.059 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:19.059Z,1513235419.059 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2017-12-14T07:10:19.059Z,1513235419.059 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:10:19.071Z,1513235419.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:10:19.071Z,1513235419.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:10:19.071Z,1513235419.071 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:10:19.365Z,1513235419.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:19.389Z,1513235419.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:10:19.389Z,1513235419.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133
2017-12-14T07:10:19.389Z,1513235419.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:10:19.390Z,1513235419.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 133
2017-12-14T07:10:19.390Z,1513235419.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:10:19.390Z,1513235419.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2017-12-14T07:10:19.740Z,1513235419.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:19.767Z,1513235419.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:10:19.767Z,1513235419.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:10:19.767Z,1513235419.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:10:19.768Z,1513235419.768 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:10:19.768Z,1513235419.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:10:19.769Z,1513235419.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:10:19.769Z,1513235419.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:10:19.770Z,1513235419.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:10:19.770Z,1513235419.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:10:20.138Z,1513235420.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:20.172Z,1513235420.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:20.619Z,1513235420.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:20.650Z,1513235420.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:20.965Z,1513235420.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:20.979Z,1513235420.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:21.384Z,1513235421.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:21.406Z,1513235421.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:21.739Z,1513235421.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:21.767Z,1513235421.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:22.143Z,1513235422.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:22.174Z,1513235422.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:22.587Z,1513235422.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:22.638Z,1513235422.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:22.944Z,1513235422.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:22.982Z,1513235422.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:23.343Z,1513235423.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:23.358Z,1513235423.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:23.757Z,1513235423.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:23.788Z,1513235423.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:24.158Z,1513235424.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:24.193Z,1513235424.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:24.591Z,1513235424.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:24.640Z,1513235424.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:24.947Z,1513235424.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:24.969Z,1513235424.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:25.350Z,1513235425.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:25.364Z,1513235425.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:25.740Z,1513235425.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:25.779Z,1513235425.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:26.143Z,1513235426.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:26.196Z,1513235426.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:26.558Z,1513235426.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:26.680Z,1513235426.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:26.961Z,1513235426.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:27.007Z,1513235427.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:27.358Z,1513235427.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:27.372Z,1513235427.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:27.746Z,1513235427.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:27.774Z,1513235427.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:28.150Z,1513235428.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:28.165Z,1513235428.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:28.550Z,1513235428.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:28.565Z,1513235428.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:28.992Z,1513235428.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:29.012Z,1513235429.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:29.362Z,1513235429.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:29.395Z,1513235429.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:29.749Z,1513235429.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:29.763Z,1513235429.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:30.153Z,1513235430.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:30.168Z,1513235430.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:30.554Z,1513235430.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:30.575Z,1513235430.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:31.010Z,1513235431.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:31.055Z,1513235431.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:31.357Z,1513235431.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:31.379Z,1513235431.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:31.752Z,1513235431.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:31.768Z,1513235431.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:32.148Z,1513235432.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:32.183Z,1513235432.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:32.580Z,1513235432.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:32.643Z,1513235432.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:32.962Z,1513235432.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:32.985Z,1513235432.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:33.358Z,1513235433.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:33.380Z,1513235433.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:33.740Z,1513235433.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:33.773Z,1513235433.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:34.143Z,1513235434.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:34.168Z,1513235434.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:34.569Z,1513235434.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:34.629Z,1513235434.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:34.973Z,1513235434.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:34.987Z,1513235434.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:35.351Z,1513235435.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:35.378Z,1513235435.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:35.744Z,1513235435.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:35.782Z,1513235435.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:36.147Z,1513235436.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:36.183Z,1513235436.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:36.578Z,1513235436.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:36.633Z,1513235436.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:36.961Z,1513235436.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:37.019Z,1513235437.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:37.390Z,1513235437.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:37.411Z,1513235437.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:37.749Z,1513235437.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:37.764Z,1513235437.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:38.147Z,1513235438.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:38.163Z,1513235438.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:38.606Z,1513235438.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:38.656Z,1513235438.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:38.946Z,1513235438.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:38.969Z,1513235438.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:39.352Z,1513235439.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:39.399Z,1513235439.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:39.757Z,1513235439.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:39.772Z,1513235439.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:40.158Z,1513235440.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:40.172Z,1513235440.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:40.617Z,1513235440.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:40.735Z,1513235440.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:40.939Z,1513235440.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:40.983Z,1513235440.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:41.336Z,1513235441.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:41.375Z,1513235441.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:41.752Z,1513235441.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:41.782Z,1513235441.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:42.143Z,1513235442.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:42.179Z,1513235442.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:42.550Z,1513235442.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:42.564Z,1513235442.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:42.968Z,1513235442.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:42.999Z,1513235442.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:43.362Z,1513235443.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:43.395Z,1513235443.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:43.744Z,1513235443.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:43.759Z,1513235443.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:44.153Z,1513235444.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:44.168Z,1513235444.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:44.557Z,1513235444.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:44.588Z,1513235444.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:44.972Z,1513235444.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:45.007Z,1513235445.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:45.355Z,1513235445.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:45.391Z,1513235445.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:45.398Z,1513235445.398 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T07:10:45.399Z,1513235445.399 [Default:CheckIn:C.Wait] Stopped
2017-12-14T07:10:45.399Z,1513235445.399 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T07:10:45.399Z,1513235445.399 [Default:CheckIn:D] Running Loop=1
2017-12-14T07:10:45.746Z,1513235445.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:45.764Z,1513235445.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:45.769Z,1513235445.769 [Default:CheckIn:D] Stopped
2017-12-14T07:10:45.769Z,1513235445.769 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:10:46.146Z,1513235446.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:46.169Z,1513235446.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:46.177Z,1513235446.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 397.506315 min 
2017-12-14T07:10:46.177Z,1513235446.177 [Default:CheckIn:E] Stopped
2017-12-14T07:10:46.177Z,1513235446.177 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:10:46.177Z,1513235446.177 [Default:CheckIn] Stopped
2017-12-14T07:10:46.178Z,1513235446.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:10:46.178Z,1513235446.178 [Default:CheckIn](INFO): Running loop #39
2017-12-14T07:10:46.178Z,1513235446.178 [Default:CheckIn] Running Loop=39
2017-12-14T07:10:46.178Z,1513235446.178 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:10:46.178Z,1513235446.178 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:10:46.588Z,1513235446.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:46.620Z,1513235446.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:49.973Z,1513235449.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:50.012Z,1513235450.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:50.124Z,1513235450.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:50.139Z,1513235450.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:50.493Z,1513235450.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:50.508Z,1513235450.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:50.886Z,1513235450.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:50.925Z,1513235450.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:51.279Z,1513235451.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:51.316Z,1513235451.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:51.702Z,1513235451.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:51.720Z,1513235451.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:52.102Z,1513235452.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:52.117Z,1513235452.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:52.504Z,1513235452.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:52.523Z,1513235452.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:52.907Z,1513235452.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:52.931Z,1513235452.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:53.284Z,1513235453.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:53.339Z,1513235453.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:53.697Z,1513235453.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:53.732Z,1513235453.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:54.084Z,1513235454.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:54.100Z,1513235454.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:54.487Z,1513235454.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:54.502Z,1513235454.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:54.902Z,1513235454.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:54.926Z,1513235454.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:55.300Z,1513235455.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:55.331Z,1513235455.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:55.698Z,1513235455.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:55.751Z,1513235455.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:56.083Z,1513235456.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:56.103Z,1513235456.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:56.534Z,1513235456.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:56.580Z,1513235456.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:56.950Z,1513235456.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:57.005Z,1513235457.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:57.280Z,1513235457.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:57.308Z,1513235457.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:57.694Z,1513235457.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:57.717Z,1513235457.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:58.108Z,1513235458.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:58.123Z,1513235458.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:58.502Z,1513235458.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:58.519Z,1513235458.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:58.942Z,1513235458.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:58.984Z,1513235458.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:59.289Z,1513235459.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:59.303Z,1513235459.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:10:59.720Z,1513235459.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:10:59.739Z,1513235459.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:00.088Z,1513235460.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:00.111Z,1513235460.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:00.498Z,1513235460.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:00.513Z,1513235460.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:00.902Z,1513235460.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:00.918Z,1513235460.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:01.294Z,1513235461.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:01.322Z,1513235461.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:01.680Z,1513235461.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:01.708Z,1513235461.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:02.095Z,1513235462.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:02.169Z,1513235462.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:02.480Z,1513235462.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:02.507Z,1513235462.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:02.930Z,1513235462.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:02.995Z,1513235462.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:03.294Z,1513235463.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:03.321Z,1513235463.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:03.702Z,1513235463.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:03.751Z,1513235463.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:04.091Z,1513235464.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:04.127Z,1513235464.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:04.476Z,1513235464.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:04.499Z,1513235464.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:04.889Z,1513235464.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:04.908Z,1513235464.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:05.292Z,1513235465.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:05.312Z,1513235465.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:05.690Z,1513235465.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:05.713Z,1513235465.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:06.149Z,1513235466.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:06.209Z,1513235466.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:06.503Z,1513235466.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:06.523Z,1513235466.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:06.880Z,1513235466.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:06.895Z,1513235466.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:07.288Z,1513235467.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:07.323Z,1513235467.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:07.683Z,1513235467.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:07.698Z,1513235467.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:08.082Z,1513235468.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:08.096Z,1513235468.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:08.486Z,1513235468.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:08.501Z,1513235468.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:08.901Z,1513235468.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:08.929Z,1513235468.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:09.319Z,1513235469.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:09.344Z,1513235469.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:09.701Z,1513235469.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:09.735Z,1513235469.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:10.084Z,1513235470.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:10.099Z,1513235470.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:10.482Z,1513235470.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:10.501Z,1513235470.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:10.956Z,1513235470.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:10.979Z,1513235470.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:11.279Z,1513235471.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:11.310Z,1513235471.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:11.690Z,1513235471.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:11.727Z,1513235471.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:12.094Z,1513235472.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:12.144Z,1513235472.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:12.516Z,1513235472.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:12.575Z,1513235472.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:12.957Z,1513235472.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:12.992Z,1513235472.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:13.286Z,1513235473.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:13.301Z,1513235473.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:13.690Z,1513235473.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:13.704Z,1513235473.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:14.084Z,1513235474.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:14.112Z,1513235474.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:14.488Z,1513235474.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:14.503Z,1513235474.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:14.903Z,1513235474.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:14.919Z,1513235474.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:15.301Z,1513235475.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:15.317Z,1513235475.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:15.706Z,1513235475.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:15.728Z,1513235475.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:16.079Z,1513235476.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:16.107Z,1513235476.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:16.478Z,1513235476.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:16.508Z,1513235476.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:16.887Z,1513235476.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:16.907Z,1513235476.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:17.291Z,1513235477.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:17.306Z,1513235477.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:17.692Z,1513235477.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:17.712Z,1513235477.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:18.093Z,1513235478.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:18.107Z,1513235478.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:18.494Z,1513235478.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:18.509Z,1513235478.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:18.919Z,1513235478.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:18.978Z,1513235478.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:19.292Z,1513235479.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:19.339Z,1513235479.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:19.691Z,1513235479.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:19.707Z,1513235479.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:20.090Z,1513235480.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:20.114Z,1513235480.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:20.480Z,1513235480.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:20.509Z,1513235480.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:20.929Z,1513235480.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:20.956Z,1513235480.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:21.308Z,1513235481.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:21.347Z,1513235481.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:21.727Z,1513235481.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:21.794Z,1513235481.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:22.092Z,1513235482.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:22.115Z,1513235482.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:22.484Z,1513235482.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:22.525Z,1513235482.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:22.890Z,1513235482.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:22.907Z,1513235482.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:23.315Z,1513235483.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:23.356Z,1513235483.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:23.701Z,1513235483.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:23.734Z,1513235483.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:24.096Z,1513235484.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:24.198Z,1513235484.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:24.514Z,1513235484.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:24.591Z,1513235484.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:24.937Z,1513235484.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:24.977Z,1513235484.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:25.285Z,1513235485.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:25.343Z,1513235485.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:25.707Z,1513235485.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:25.743Z,1513235485.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:26.090Z,1513235486.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:26.162Z,1513235486.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:26.501Z,1513235486.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:26.535Z,1513235486.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:26.950Z,1513235486.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:26.000Z,1513235487.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:27.325Z,1513235487.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:27.345Z,1513235487.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:27.699Z,1513235487.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:27.719Z,1513235487.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:28.128Z,1513235488.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:28.151Z,1513235488.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:28.487Z,1513235488.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:28.506Z,1513235488.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:28.884Z,1513235488.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:28.937Z,1513235488.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:29.286Z,1513235489.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:29.309Z,1513235489.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:29.718Z,1513235489.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:29.738Z,1513235489.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:30.106Z,1513235490.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:30.120Z,1513235490.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:30.522Z,1513235490.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:30.628Z,1513235490.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:30.879Z,1513235490.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:30.928Z,1513235490.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:31.297Z,1513235491.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:31.341Z,1513235491.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:31.681Z,1513235491.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:31.735Z,1513235491.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:32.088Z,1513235492.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:32.111Z,1513235492.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:32.499Z,1513235492.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:32.626Z,1513235492.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:32.892Z,1513235492.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:32.962Z,1513235492.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:33.296Z,1513235493.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:33.344Z,1513235493.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:33.723Z,1513235493.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:33.740Z,1513235493.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:34.095Z,1513235494.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:34.134Z,1513235494.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:34.485Z,1513235494.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:34.599Z,1513235494.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:34.885Z,1513235494.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:34.946Z,1513235494.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:35.282Z,1513235495.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:35.336Z,1513235495.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:35.711Z,1513235495.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:35.762Z,1513235495.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:36.102Z,1513235496.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:36.123Z,1513235496.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:36.496Z,1513235496.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:36.527Z,1513235496.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:36.889Z,1513235496.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:36.932Z,1513235496.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:37.291Z,1513235497.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:37.315Z,1513235497.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:37.694Z,1513235497.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:37.762Z,1513235497.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:38.092Z,1513235498.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:38.119Z,1513235498.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:38.479Z,1513235498.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:38.548Z,1513235498.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:38.967Z,1513235498.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:39.007Z,1513235499.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:39.304Z,1513235499.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:39.328Z,1513235499.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:39.691Z,1513235499.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:39.759Z,1513235499.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:40.081Z,1513235500.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:40.133Z,1513235500.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:40.483Z,1513235500.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:40.534Z,1513235500.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:40.973Z,1513235500.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:41.044Z,1513235501.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:41.288Z,1513235501.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:41.334Z,1513235501.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:41.696Z,1513235501.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:41.774Z,1513235501.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:42.104Z,1513235502.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:42.134Z,1513235502.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:42.500Z,1513235502.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:42.590Z,1513235502.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:42.882Z,1513235502.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:42.934Z,1513235502.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:43.281Z,1513235503.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:43.330Z,1513235503.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:43.685Z,1513235503.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:43.769Z,1513235503.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:44.086Z,1513235504.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:44.141Z,1513235504.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:44.489Z,1513235504.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:44.503Z,1513235504.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:44.893Z,1513235504.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:44.908Z,1513235504.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:45.309Z,1513235505.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:45.343Z,1513235505.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:45.697Z,1513235505.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:45.712Z,1513235505.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:46.086Z,1513235506.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:46.119Z,1513235506.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:46.491Z,1513235506.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:46.591Z,1513235506.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:46.884Z,1513235506.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:46.922Z,1513235506.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:50.354Z,1513235510.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:50.404Z,1513235510.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:50.515Z,1513235510.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:50.550Z,1513235510.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:50.892Z,1513235510.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:50.955Z,1513235510.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:51.307Z,1513235511.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:51.356Z,1513235511.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:51.673Z,1513235511.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:51.688Z,1513235511.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:52.075Z,1513235512.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:52.090Z,1513235512.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:52.477Z,1513235512.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:52.492Z,1513235512.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:52.893Z,1513235512.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:52.937Z,1513235512.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:53.289Z,1513235513.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:53.320Z,1513235513.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:53.690Z,1513235513.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:53.723Z,1513235513.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:54.077Z,1513235514.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:54.095Z,1513235514.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:54.509Z,1513235514.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:54.539Z,1513235514.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:54.925Z,1513235514.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:54.948Z,1513235514.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:55.269Z,1513235515.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:55.308Z,1513235515.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:55.686Z,1513235515.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:55.733Z,1513235515.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:56.096Z,1513235516.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:56.114Z,1513235516.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:56.478Z,1513235516.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:56.508Z,1513235516.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:56.871Z,1513235516.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:56.903Z,1513235516.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:57.275Z,1513235517.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:57.291Z,1513235517.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:57.705Z,1513235517.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:57.738Z,1513235517.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:58.076Z,1513235518.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:58.095Z,1513235518.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:58.467Z,1513235518.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:58.504Z,1513235518.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:58.878Z,1513235518.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:58.922Z,1513235518.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:59.296Z,1513235519.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:59.351Z,1513235519.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:11:59.698Z,1513235519.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:11:59.713Z,1513235519.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:00.073Z,1513235520.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:00.101Z,1513235520.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:00.473Z,1513235520.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:00.488Z,1513235520.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:00.901Z,1513235520.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:00.936Z,1513235520.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:01.268Z,1513235521.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:01.304Z,1513235521.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:01.690Z,1513235521.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:01.708Z,1513235521.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:02.095Z,1513235522.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:02.110Z,1513235522.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:02.490Z,1513235522.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:02.506Z,1513235522.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:02.873Z,1513235522.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:02.888Z,1513235522.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:03.276Z,1513235523.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:03.291Z,1513235523.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:03.708Z,1513235523.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:03.736Z,1513235523.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:04.131Z,1513235524.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:04.173Z,1513235524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:04.471Z,1513235524.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:04.486Z,1513235524.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:04.894Z,1513235524.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:04.935Z,1513235524.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:05.286Z,1513235525.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:05.317Z,1513235525.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:05.690Z,1513235525.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:05.716Z,1513235525.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:06.080Z,1513235526.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:06.095Z,1513235526.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:06.476Z,1513235526.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:06.492Z,1513235526.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:06.941Z,1513235526.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:06.976Z,1513235526.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:07.301Z,1513235527.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:07.342Z,1513235527.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:07.688Z,1513235527.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:07.714Z,1513235527.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:08.091Z,1513235528.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:08.106Z,1513235528.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:08.488Z,1513235528.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:08.503Z,1513235528.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:08.933Z,1513235528.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:08.964Z,1513235528.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:09.271Z,1513235529.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:09.294Z,1513235529.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:09.680Z,1513235529.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:09.695Z,1513235529.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:10.081Z,1513235530.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:10.096Z,1513235530.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:10.482Z,1513235530.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:10.589Z,1513235530.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:10.890Z,1513235530.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:10.939Z,1513235530.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:11.283Z,1513235531.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:11.323Z,1513235531.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:11.682Z,1513235531.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:11.697Z,1513235531.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:12.077Z,1513235532.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:12.134Z,1513235532.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:12.477Z,1513235532.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:12.495Z,1513235532.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:12.868Z,1513235532.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:12.929Z,1513235532.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:13.267Z,1513235533.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:13.303Z,1513235533.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:13.691Z,1513235533.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:13.706Z,1513235533.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:14.081Z,1513235534.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:14.112Z,1513235534.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:14.482Z,1513235534.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:14.511Z,1513235534.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:14.877Z,1513235534.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:14.892Z,1513235534.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:15.273Z,1513235535.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:15.295Z,1513235535.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:15.673Z,1513235535.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:15.688Z,1513235535.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:16.076Z,1513235536.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:16.092Z,1513235536.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:16.468Z,1513235536.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:16.495Z,1513235536.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:16.898Z,1513235536.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:16.951Z,1513235536.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:17.289Z,1513235537.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:17.315Z,1513235537.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:17.692Z,1513235537.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:17.706Z,1513235537.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:18.077Z,1513235538.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:18.092Z,1513235538.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:18.475Z,1513235538.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:18.491Z,1513235538.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:18.875Z,1513235538.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:18.896Z,1513235538.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:19.270Z,1513235539.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:19.292Z,1513235539.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:19.681Z,1513235539.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:19.696Z,1513235539.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:20.120Z,1513235540.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:20.176Z,1513235540.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:20.481Z,1513235540.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:20.499Z,1513235540.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:20.910Z,1513235540.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:20.990Z,1513235540.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:21.271Z,1513235541.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:21.309Z,1513235541.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:21.671Z,1513235541.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:21.686Z,1513235541.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:22.075Z,1513235542.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:22.090Z,1513235542.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:22.475Z,1513235542.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:22.489Z,1513235542.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:22.942Z,1513235542.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:22.983Z,1513235542.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:23.298Z,1513235543.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:23.335Z,1513235543.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:23.689Z,1513235543.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:23.711Z,1513235543.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:24.079Z,1513235544.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:24.099Z,1513235544.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:24.476Z,1513235544.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:24.495Z,1513235544.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:24.881Z,1513235544.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:24.912Z,1513235544.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:25.276Z,1513235545.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:25.315Z,1513235545.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:25.683Z,1513235545.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:25.717Z,1513235545.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:26.081Z,1513235546.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:26.095Z,1513235546.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:26.488Z,1513235546.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:26.570Z,1513235546.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:26.887Z,1513235546.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:26.915Z,1513235546.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:27.272Z,1513235547.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:27.287Z,1513235547.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:27.675Z,1513235547.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:27.715Z,1513235547.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:28.072Z,1513235548.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:28.087Z,1513235548.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:28.475Z,1513235548.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:28.490Z,1513235548.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:28.886Z,1513235548.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:28.901Z,1513235548.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:29.282Z,1513235549.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:29.303Z,1513235549.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:29.682Z,1513235549.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:29.697Z,1513235549.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:30.076Z,1513235550.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:30.091Z,1513235550.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:30.471Z,1513235550.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:30.494Z,1513235550.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:30.880Z,1513235550.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:30.894Z,1513235550.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:31.277Z,1513235551.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:31.292Z,1513235551.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:31.678Z,1513235551.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:31.699Z,1513235551.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:32.090Z,1513235552.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:32.125Z,1513235552.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:32.482Z,1513235552.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:32.497Z,1513235552.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:32.904Z,1513235552.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:33.007Z,1513235553.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:33.276Z,1513235553.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:33.291Z,1513235553.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:33.680Z,1513235553.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:33.695Z,1513235553.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:34.082Z,1513235554.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:34.131Z,1513235554.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:34.476Z,1513235554.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:34.499Z,1513235554.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:34.916Z,1513235554.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:35.049Z,1513235555.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:35.294Z,1513235555.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:35.315Z,1513235555.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:35.690Z,1513235555.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:35.705Z,1513235555.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:36.071Z,1513235556.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:36.098Z,1513235556.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:36.467Z,1513235556.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:36.500Z,1513235556.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:36.900Z,1513235556.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:36.954Z,1513235556.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:37.278Z,1513235557.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:37.292Z,1513235557.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:37.685Z,1513235557.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:37.716Z,1513235557.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:38.089Z,1513235558.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:38.115Z,1513235558.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:38.481Z,1513235558.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:38.496Z,1513235558.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:38.880Z,1513235558.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:38.895Z,1513235558.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:39.318Z,1513235559.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:39.371Z,1513235559.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:39.672Z,1513235559.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:39.688Z,1513235559.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:40.073Z,1513235560.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:40.105Z,1513235560.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:40.481Z,1513235560.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:40.496Z,1513235560.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:40.899Z,1513235560.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:40.919Z,1513235560.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:41.292Z,1513235561.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:41.307Z,1513235561.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:41.692Z,1513235561.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:41.707Z,1513235561.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:42.071Z,1513235562.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:42.096Z,1513235562.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:42.554Z,1513235562.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:42.649Z,1513235562.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:42.878Z,1513235562.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:42.892Z,1513235562.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:43.277Z,1513235563.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:43.327Z,1513235563.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:43.687Z,1513235563.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:43.714Z,1513235563.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:44.089Z,1513235564.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:44.127Z,1513235564.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:44.478Z,1513235564.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:44.492Z,1513235564.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:44.867Z,1513235564.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:44.899Z,1513235564.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:45.268Z,1513235565.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:45.295Z,1513235565.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:45.672Z,1513235565.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:45.726Z,1513235565.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:46.067Z,1513235566.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:46.106Z,1513235566.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:46.467Z,1513235566.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:46.503Z,1513235566.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:46.888Z,1513235566.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:46.908Z,1513235566.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:47.292Z,1513235567.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:47.311Z,1513235567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:50.681Z,1513235570.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:50.696Z,1513235570.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:50.805Z,1513235570.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:50.820Z,1513235570.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:51.146Z,1513235571.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:51.184Z,1513235571.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:51.563Z,1513235571.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:51.578Z,1513235571.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:51.967Z,1513235571.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:52.005Z,1513235572.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:52.343Z,1513235572.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:52.377Z,1513235572.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:52.770Z,1513235572.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:52.791Z,1513235572.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:53.169Z,1513235573.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:53.214Z,1513235573.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:53.564Z,1513235573.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:53.586Z,1513235573.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:53.958Z,1513235573.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:53.979Z,1513235573.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:54.363Z,1513235574.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:54.391Z,1513235574.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:54.744Z,1513235574.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:54.779Z,1513235574.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:55.143Z,1513235575.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:55.180Z,1513235575.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:55.574Z,1513235575.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:55.647Z,1513235575.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:55.974Z,1513235575.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:55.988Z,1513235575.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:56.373Z,1513235576.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:56.401Z,1513235576.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:56.769Z,1513235576.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:56.834Z,1513235576.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:57.149Z,1513235577.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:57.185Z,1513235577.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:57.579Z,1513235577.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:57.634Z,1513235577.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:57.973Z,1513235577.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:58.007Z,1513235578.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:58.404Z,1513235578.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:58.440Z,1513235578.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:58.749Z,1513235578.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:58.785Z,1513235578.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:59.153Z,1513235579.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:59.185Z,1513235579.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:59.550Z,1513235579.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:59.594Z,1513235579.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:12:59.944Z,1513235579.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:12:59.958Z,1513235579.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:00.350Z,1513235580.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:00.385Z,1513235580.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:00.770Z,1513235580.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:00.799Z,1513235580.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:01.162Z,1513235581.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:01.198Z,1513235581.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:01.559Z,1513235581.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:01.590Z,1513235581.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:01.976Z,1513235581.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:02.001Z,1513235582.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:02.353Z,1513235582.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:02.374Z,1513235582.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:02.758Z,1513235582.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:02.806Z,1513235582.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:03.146Z,1513235583.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:03.186Z,1513235583.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:03.575Z,1513235583.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:03.589Z,1513235583.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:03.954Z,1513235583.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:04.002Z,1513235584.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:04.371Z,1513235584.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:04.414Z,1513235584.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:04.744Z,1513235584.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:04.771Z,1513235584.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:05.144Z,1513235585.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:05.178Z,1513235585.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:05.571Z,1513235585.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:05.599Z,1513235585.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:05.973Z,1513235585.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:06.024Z,1513235586.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:06.369Z,1513235586.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:06.392Z,1513235586.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:06.743Z,1513235586.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:06.781Z,1513235586.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:07.143Z,1513235587.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:07.180Z,1513235587.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:07.567Z,1513235587.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:07.609Z,1513235587.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:07.966Z,1513235587.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:07.999Z,1513235587.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:08.375Z,1513235588.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:08.390Z,1513235588.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:08.744Z,1513235588.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:08.787Z,1513235588.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:09.143Z,1513235589.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:09.191Z,1513235589.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:09.567Z,1513235589.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:09.589Z,1513235589.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:09.948Z,1513235589.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:09.986Z,1513235589.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:10.373Z,1513235590.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:10.387Z,1513235590.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:10.744Z,1513235590.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:10.792Z,1513235590.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:11.183Z,1513235591.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:11.208Z,1513235591.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:11.582Z,1513235591.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:11.596Z,1513235591.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:11.979Z,1513235591.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:11.995Z,1513235591.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:12.350Z,1513235592.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:12.383Z,1513235592.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:12.752Z,1513235592.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:12.776Z,1513235592.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:13.144Z,1513235593.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:13.179Z,1513235593.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:13.571Z,1513235593.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:13.586Z,1513235593.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:13.966Z,1513235593.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:14.007Z,1513235594.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:14.385Z,1513235594.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:14.400Z,1513235594.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:14.750Z,1513235594.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:14.795Z,1513235594.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:15.148Z,1513235595.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:15.188Z,1513235595.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:15.552Z,1513235595.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:15.566Z,1513235595.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:15.953Z,1513235595.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:15.969Z,1513235595.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:16.353Z,1513235596.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:16.376Z,1513235596.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:16.763Z,1513235596.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:16.778Z,1513235596.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:17.158Z,1513235597.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:17.204Z,1513235597.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:17.571Z,1513235597.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:17.619Z,1513235597.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:17.943Z,1513235597.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:18.047Z,1513235598.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:18.340Z,1513235598.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:18.367Z,1513235598.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:18.744Z,1513235598.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:18.797Z,1513235598.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:19.143Z,1513235599.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:19.185Z,1513235599.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:19.554Z,1513235599.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:19.627Z,1513235599.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:19.966Z,1513235599.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:19.998Z,1513235599.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:19.998Z,1513235599.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134
2017-12-14T07:13:19.998Z,1513235599.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:13:19.000Z,1513235600.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:20.000Z,1513235600.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 134
2017-12-14T07:13:20.000Z,1513235600.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:13:20.002Z,1513235600.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:20.002Z,1513235600.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2017-12-14T07:13:20.002Z,1513235600.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:13:20.023Z,1513235600.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:13:20.023Z,1513235600.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:13:20.023Z,1513235600.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:13:20.359Z,1513235600.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:20.407Z,1513235600.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:13:20.407Z,1513235600.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134
2017-12-14T07:13:20.407Z,1513235600.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:13:20.407Z,1513235600.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 134
2017-12-14T07:13:20.408Z,1513235600.408 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:13:20.408Z,1513235600.408 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2017-12-14T07:13:20.744Z,1513235600.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:20.803Z,1513235600.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:13:20.803Z,1513235600.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:13:20.804Z,1513235600.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:13:20.804Z,1513235600.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:13:20.804Z,1513235600.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:13:20.813Z,1513235600.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:13:20.813Z,1513235600.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:13:20.814Z,1513235600.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:13:20.814Z,1513235600.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:13:21.164Z,1513235601.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:21.203Z,1513235601.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:21.568Z,1513235601.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:21.582Z,1513235601.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:21.964Z,1513235601.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:22.003Z,1513235602.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:22.363Z,1513235602.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:22.385Z,1513235602.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:22.754Z,1513235602.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:22.778Z,1513235602.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:23.152Z,1513235603.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:23.175Z,1513235603.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:23.566Z,1513235603.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:23.608Z,1513235603.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:23.967Z,1513235603.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:24.051Z,1513235604.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:24.364Z,1513235604.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:24.387Z,1513235604.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:24.744Z,1513235604.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:24.781Z,1513235604.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:25.152Z,1513235605.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:25.184Z,1513235605.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:25.554Z,1513235605.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:25.587Z,1513235605.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:25.975Z,1513235605.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:25.991Z,1513235605.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:26.374Z,1513235606.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:26.389Z,1513235606.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:26.744Z,1513235606.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:26.808Z,1513235606.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:27.143Z,1513235607.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:27.203Z,1513235607.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:27.572Z,1513235607.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:27.595Z,1513235607.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:27.950Z,1513235607.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:28.010Z,1513235608.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:28.358Z,1513235608.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:28.394Z,1513235608.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:28.748Z,1513235608.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:28.787Z,1513235608.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:29.144Z,1513235609.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:29.180Z,1513235609.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:29.574Z,1513235609.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:29.597Z,1513235609.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:29.967Z,1513235609.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:29.997Z,1513235609.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:30.368Z,1513235610.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:30.402Z,1513235610.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:30.751Z,1513235610.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:30.789Z,1513235610.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:31.153Z,1513235611.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:31.184Z,1513235611.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:31.555Z,1513235611.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:31.594Z,1513235611.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:31.975Z,1513235611.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:31.996Z,1513235611.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:32.137Z,1513235612.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:32.362Z,1513235612.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:32.393Z,1513235612.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:32.752Z,1513235612.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:32.784Z,1513235612.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:32.934Z,1513235612.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:33.150Z,1513235613.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:33.183Z,1513235613.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:33.337Z,1513235613.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:33.582Z,1513235613.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:33.615Z,1513235613.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:33.962Z,1513235613.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:33.993Z,1513235613.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:34.371Z,1513235614.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:34.398Z,1513235614.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:34.757Z,1513235614.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:34.787Z,1513235614.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:35.148Z,1513235615.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:35.167Z,1513235615.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:35.562Z,1513235615.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:35.600Z,1513235615.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:35.961Z,1513235615.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:35.995Z,1513235615.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:36.366Z,1513235616.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:36.403Z,1513235616.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:36.772Z,1513235616.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:36.818Z,1513235616.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:37.153Z,1513235617.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:37.196Z,1513235617.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:37.564Z,1513235617.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:37.579Z,1513235617.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:37.962Z,1513235617.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:38.006Z,1513235618.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:38.358Z,1513235618.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:38.403Z,1513235618.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:38.753Z,1513235618.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:38.775Z,1513235618.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:39.157Z,1513235619.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:39.178Z,1513235619.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:39.558Z,1513235619.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:39.604Z,1513235619.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:39.998Z,1513235619.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:40.083Z,1513235620.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:40.358Z,1513235620.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:40.401Z,1513235620.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:40.778Z,1513235620.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:40.792Z,1513235620.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:41.143Z,1513235621.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:41.211Z,1513235621.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:41.563Z,1513235621.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:41.586Z,1513235621.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:41.976Z,1513235621.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:42.031Z,1513235622.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:42.372Z,1513235622.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:42.403Z,1513235622.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:42.744Z,1513235622.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:42.779Z,1513235622.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:43.145Z,1513235623.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:43.187Z,1513235623.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:43.559Z,1513235623.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:43.598Z,1513235623.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:43.971Z,1513235623.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:44.001Z,1513235624.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:44.358Z,1513235624.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:44.402Z,1513235624.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:44.755Z,1513235624.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:44.770Z,1513235624.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:45.152Z,1513235625.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:45.180Z,1513235625.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:45.572Z,1513235625.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:45.591Z,1513235625.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:45.962Z,1513235625.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:46.005Z,1513235626.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:46.138Z,1513235626.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:46.384Z,1513235626.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:46.416Z,1513235626.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:46.753Z,1513235626.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:46.806Z,1513235626.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:46.933Z,1513235626.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:47.153Z,1513235627.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:47.181Z,1513235627.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:47.361Z,1513235627.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:47.565Z,1513235627.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:47.606Z,1513235627.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:51.038Z,1513235631.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:51.110Z,1513235631.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:51.215Z,1513235631.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:51.239Z,1513235631.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:51.562Z,1513235631.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:51.592Z,1513235631.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:51.973Z,1513235631.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:51.988Z,1513235631.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:52.366Z,1513235632.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:52.405Z,1513235632.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:52.771Z,1513235632.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:52.812Z,1513235632.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:53.183Z,1513235633.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:53.198Z,1513235633.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:53.568Z,1513235633.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:53.595Z,1513235633.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:53.959Z,1513235633.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:54.007Z,1513235634.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:54.359Z,1513235634.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:54.394Z,1513235634.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:54.756Z,1513235634.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:54.792Z,1513235634.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:55.158Z,1513235635.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:55.190Z,1513235635.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:55.576Z,1513235635.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:55.604Z,1513235635.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:55.984Z,1513235635.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:56.023Z,1513235636.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:56.392Z,1513235636.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:56.415Z,1513235636.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:56.769Z,1513235636.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:56.800Z,1513235636.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:57.160Z,1513235637.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:57.190Z,1513235637.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:57.567Z,1513235637.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:57.605Z,1513235637.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:57.980Z,1513235637.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:58.021Z,1513235638.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:58.372Z,1513235638.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:58.387Z,1513235638.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:58.771Z,1513235638.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:58.814Z,1513235638.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:59.206Z,1513235639.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:59.229Z,1513235639.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:59.580Z,1513235639.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:13:59.595Z,1513235639.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:13:59.971Z,1513235639.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:00.000Z,1513235640.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:00.370Z,1513235640.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:00.414Z,1513235640.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:00.772Z,1513235640.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:00.795Z,1513235640.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:01.162Z,1513235641.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:01.197Z,1513235641.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:01.587Z,1513235641.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:01.624Z,1513235641.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:01.978Z,1513235641.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:02.018Z,1513235642.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:02.389Z,1513235642.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:02.396Z,1513235642.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x23146 got:0x23321
2017-12-14T07:14:02.431Z,1513235642.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:02.756Z,1513235642.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:02.797Z,1513235642.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:03.165Z,1513235643.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:03.223Z,1513235643.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:03.580Z,1513235643.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:03.654Z,1513235643.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:04.032Z,1513235644.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:04.049Z,1513235644.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:04.383Z,1513235644.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:04.400Z,1513235644.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:04.760Z,1513235644.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:04.832Z,1513235644.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:05.164Z,1513235645.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:05.201Z,1513235645.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:05.567Z,1513235645.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:05.654Z,1513235645.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:05.985Z,1513235645.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:05.999Z,1513235645.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:06.382Z,1513235646.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:06.398Z,1513235646.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:06.756Z,1513235646.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:06.800Z,1513235646.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:07.163Z,1513235647.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:07.194Z,1513235647.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:07.585Z,1513235647.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:07.599Z,1513235647.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:07.967Z,1513235647.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:07.998Z,1513235647.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:08.388Z,1513235648.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:08.407Z,1513235648.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:08.760Z,1513235648.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:08.817Z,1513235648.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:09.167Z,1513235649.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:09.187Z,1513235649.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:09.576Z,1513235649.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:09.595Z,1513235649.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:09.971Z,1513235649.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:09.998Z,1513235649.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:10.358Z,1513235650.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:10.384Z,1513235650.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:10.822Z,1513235650.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:10.962Z,1513235650.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:11.184Z,1513235651.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:11.199Z,1513235651.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:11.572Z,1513235651.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:11.609Z,1513235651.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:12.009Z,1513235652.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:12.040Z,1513235652.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:12.355Z,1513235652.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:12.388Z,1513235652.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:12.773Z,1513235652.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:12.788Z,1513235652.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:13.155Z,1513235653.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:13.202Z,1513235653.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:13.584Z,1513235653.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:13.603Z,1513235653.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:13.972Z,1513235653.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:14.027Z,1513235654.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:14.134Z,1513235654.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:14.376Z,1513235654.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:14.396Z,1513235654.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:14.742Z,1513235654.742 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T07:14:14.742Z,1513235654.742 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T07:14:14.742Z,1513235654.742 [DropWeight](ERROR): Hardware Fault
2017-12-14T07:14:14.760Z,1513235654.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:14.806Z,1513235654.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:14.830Z,1513235654.830 [CBIT](INFO): Critical error at 20171214T071414
2017-12-14T07:14:14.832Z,1513235654.832 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T07:14:14.833Z,1513235654.833 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T07:14:14.930Z,1513235654.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:15.185Z,1513235655.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:15.212Z,1513235655.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:15.250Z,1513235655.250 [CBIT](INFO): Critical error at 20171214T071414
2017-12-14T07:14:15.350Z,1513235655.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:15.590Z,1513235655.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:15.618Z,1513235655.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:15.976Z,1513235655.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:16.003Z,1513235656.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:16.374Z,1513235656.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:16.403Z,1513235656.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:16.756Z,1513235656.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:16.789Z,1513235656.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:17.155Z,1513235657.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:17.202Z,1513235657.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:17.574Z,1513235657.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:17.605Z,1513235657.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:17.985Z,1513235657.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:18.006Z,1513235658.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:18.392Z,1513235658.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:18.445Z,1513235658.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:18.756Z,1513235658.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:18.799Z,1513235658.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:19.162Z,1513235659.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:19.190Z,1513235659.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:19.573Z,1513235659.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:19.607Z,1513235659.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:19.970Z,1513235659.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:20.010Z,1513235660.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:20.375Z,1513235660.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:20.407Z,1513235660.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:20.764Z,1513235660.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:20.791Z,1513235660.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:21.155Z,1513235661.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:21.198Z,1513235661.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:21.588Z,1513235661.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:21.615Z,1513235661.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:21.991Z,1513235661.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:22.006Z,1513235662.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:22.371Z,1513235662.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:22.403Z,1513235662.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:22.757Z,1513235662.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:22.806Z,1513235662.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:23.159Z,1513235663.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:23.201Z,1513235663.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:23.588Z,1513235663.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:23.603Z,1513235663.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:23.982Z,1513235663.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:24.004Z,1513235664.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:24.374Z,1513235664.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:24.412Z,1513235664.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:24.785Z,1513235664.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:24.823Z,1513235664.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:25.167Z,1513235665.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:25.187Z,1513235665.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:25.582Z,1513235665.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:25.596Z,1513235665.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:25.979Z,1513235665.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:26.090Z,1513235666.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:26.384Z,1513235666.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:26.390Z,1513235666.390 [PNI_TCM](ERROR): CRC does not match. Expected:0x6725 got:0x43627
2017-12-14T07:14:26.427Z,1513235666.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:26.756Z,1513235666.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:26.849Z,1513235666.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:27.171Z,1513235667.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:27.226Z,1513235667.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:27.569Z,1513235667.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:27.608Z,1513235667.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:28.006Z,1513235668.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:28.062Z,1513235668.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:28.170Z,1513235668.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:28.371Z,1513235668.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:28.387Z,1513235668.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:28.768Z,1513235668.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:28.783Z,1513235668.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:28.965Z,1513235668.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:29.167Z,1513235669.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:29.212Z,1513235669.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:29.369Z,1513235669.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:29.563Z,1513235669.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:29.593Z,1513235669.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:29.978Z,1513235669.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:30.010Z,1513235670.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:30.376Z,1513235670.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:30.412Z,1513235670.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:30.764Z,1513235670.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:30.805Z,1513235670.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:31.198Z,1513235671.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:31.225Z,1513235671.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:31.577Z,1513235671.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:31.599Z,1513235671.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:31.969Z,1513235671.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:31.996Z,1513235671.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:32.377Z,1513235672.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:32.415Z,1513235672.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:32.766Z,1513235672.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:32.795Z,1513235672.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:33.167Z,1513235673.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:33.188Z,1513235673.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:33.555Z,1513235673.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:33.585Z,1513235673.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:33.956Z,1513235673.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:33.998Z,1513235673.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:34.382Z,1513235674.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:34.431Z,1513235674.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:34.780Z,1513235674.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:34.807Z,1513235674.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:35.175Z,1513235675.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:35.207Z,1513235675.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:35.578Z,1513235675.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:35.615Z,1513235675.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:35.959Z,1513235675.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:35.992Z,1513235675.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:36.359Z,1513235676.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:36.417Z,1513235676.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:36.762Z,1513235676.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:36.790Z,1513235676.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:37.164Z,1513235677.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:37.207Z,1513235677.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:37.588Z,1513235677.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:37.603Z,1513235677.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:37.973Z,1513235677.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:38.001Z,1513235678.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:38.374Z,1513235678.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:38.401Z,1513235678.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:38.766Z,1513235678.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:38.804Z,1513235678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:39.162Z,1513235679.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:39.193Z,1513235679.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:39.582Z,1513235679.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:39.604Z,1513235679.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:39.979Z,1513235679.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:40.008Z,1513235680.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:40.362Z,1513235680.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:40.403Z,1513235680.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:40.764Z,1513235680.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:40.854Z,1513235680.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:41.183Z,1513235681.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:41.203Z,1513235681.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:41.586Z,1513235681.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:41.602Z,1513235681.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:41.982Z,1513235681.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:42.004Z,1513235682.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:42.378Z,1513235682.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:42.397Z,1513235682.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:42.760Z,1513235682.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:42.795Z,1513235682.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:43.158Z,1513235683.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:43.189Z,1513235683.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:43.575Z,1513235683.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:43.608Z,1513235683.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:43.970Z,1513235683.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:44.005Z,1513235684.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:44.380Z,1513235684.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:44.395Z,1513235684.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:44.772Z,1513235684.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:44.792Z,1513235684.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:45.155Z,1513235685.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:45.198Z,1513235685.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:45.584Z,1513235685.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:45.599Z,1513235685.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:45.988Z,1513235685.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:46.003Z,1513235686.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:46.384Z,1513235686.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:46.399Z,1513235686.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:46.756Z,1513235686.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:46.786Z,1513235686.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:47.176Z,1513235687.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:47.245Z,1513235687.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:47.568Z,1513235687.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:47.591Z,1513235687.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:51.069Z,1513235691.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:51.173Z,1513235691.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:51.274Z,1513235691.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:51.289Z,1513235691.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:51.631Z,1513235691.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:51.666Z,1513235691.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:52.036Z,1513235692.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:52.066Z,1513235692.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:52.431Z,1513235692.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:52.479Z,1513235692.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:52.842Z,1513235692.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:52.868Z,1513235692.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:53.260Z,1513235693.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:53.318Z,1513235693.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:53.693Z,1513235693.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:53.719Z,1513235693.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:54.043Z,1513235694.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:54.066Z,1513235694.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:54.435Z,1513235694.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:54.470Z,1513235694.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:54.834Z,1513235694.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:54.848Z,1513235694.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:55.243Z,1513235695.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:55.259Z,1513235695.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:55.650Z,1513235695.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:55.674Z,1513235695.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:56.042Z,1513235696.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:56.056Z,1513235696.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:56.441Z,1513235696.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:56.456Z,1513235696.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:56.910Z,1513235696.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:56.998Z,1513235696.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:57.231Z,1513235697.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:57.263Z,1513235697.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:57.634Z,1513235697.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:57.661Z,1513235697.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:58.032Z,1513235698.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:58.062Z,1513235698.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:58.428Z,1513235698.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:58.451Z,1513235698.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:58.841Z,1513235698.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:58.871Z,1513235698.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:59.259Z,1513235699.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:59.274Z,1513235699.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:14:59.643Z,1513235699.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:14:59.675Z,1513235699.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:00.030Z,1513235700.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:00.070Z,1513235700.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:00.436Z,1513235700.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:00.460Z,1513235700.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:00.835Z,1513235700.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:00.855Z,1513235700.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:01.235Z,1513235701.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:01.249Z,1513235701.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:01.650Z,1513235701.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:01.695Z,1513235701.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:02.054Z,1513235702.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:02.086Z,1513235702.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:02.450Z,1513235702.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:02.480Z,1513235702.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:02.840Z,1513235702.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:02.863Z,1513235702.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:03.246Z,1513235703.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:03.277Z,1513235703.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:03.639Z,1513235703.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:03.659Z,1513235703.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:04.045Z,1513235704.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:04.060Z,1513235704.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:04.440Z,1513235704.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:04.455Z,1513235704.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:04.844Z,1513235704.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:04.871Z,1513235704.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:05.250Z,1513235705.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:05.264Z,1513235705.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:05.650Z,1513235705.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:05.665Z,1513235705.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:06.040Z,1513235706.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:06.055Z,1513235706.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:06.465Z,1513235706.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:06.500Z,1513235706.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:06.832Z,1513235706.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:06.867Z,1513235706.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:07.234Z,1513235707.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:07.269Z,1513235707.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:07.641Z,1513235707.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:07.678Z,1513235707.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:07.873Z,1513235707.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:08.057Z,1513235708.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:08.072Z,1513235708.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:08.441Z,1513235708.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:08.475Z,1513235708.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:08.669Z,1513235708.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:08.834Z,1513235708.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:08.916Z,1513235708.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:09.242Z,1513235709.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:09.257Z,1513235709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:09.640Z,1513235709.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:09.656Z,1513235709.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:10.040Z,1513235710.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:10.059Z,1513235710.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:10.444Z,1513235710.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:10.459Z,1513235710.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:10.850Z,1513235710.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:10.915Z,1513235710.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:11.255Z,1513235711.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:11.278Z,1513235711.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:11.656Z,1513235711.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:11.671Z,1513235711.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:12.030Z,1513235712.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:12.065Z,1513235712.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:12.431Z,1513235712.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:12.464Z,1513235712.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:12.887Z,1513235712.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:12.923Z,1513235712.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:13.234Z,1513235713.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:13.266Z,1513235713.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:13.658Z,1513235713.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:13.680Z,1513235713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:14.058Z,1513235714.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:14.127Z,1513235714.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:14.441Z,1513235714.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:14.468Z,1513235714.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:14.836Z,1513235714.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:14.886Z,1513235714.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:15.240Z,1513235715.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:15.255Z,1513235715.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:15.641Z,1513235715.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:15.687Z,1513235715.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:16.064Z,1513235716.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:16.111Z,1513235716.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:16.440Z,1513235716.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:16.455Z,1513235716.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:16.853Z,1513235716.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:16.883Z,1513235716.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:17.254Z,1513235717.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:17.284Z,1513235717.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:17.655Z,1513235717.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:17.684Z,1513235717.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:18.039Z,1513235718.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:18.064Z,1513235718.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:18.434Z,1513235718.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:18.448Z,1513235718.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:18.842Z,1513235718.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:18.857Z,1513235718.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:19.255Z,1513235719.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:19.288Z,1513235719.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:19.642Z,1513235719.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:19.656Z,1513235719.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:20.055Z,1513235720.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:20.083Z,1513235720.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:20.441Z,1513235720.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:20.463Z,1513235720.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:20.839Z,1513235720.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:20.854Z,1513235720.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:21.243Z,1513235721.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:21.263Z,1513235721.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:21.642Z,1513235721.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:21.656Z,1513235721.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:22.040Z,1513235722.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:22.056Z,1513235722.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:22.483Z,1513235722.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:22.502Z,1513235722.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:22.851Z,1513235722.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:22.935Z,1513235722.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:23.246Z,1513235723.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:23.275Z,1513235723.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:23.647Z,1513235723.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:23.674Z,1513235723.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:24.030Z,1513235724.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:24.079Z,1513235724.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:24.434Z,1513235724.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:24.449Z,1513235724.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:24.829Z,1513235724.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:24.844Z,1513235724.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:25.240Z,1513235725.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:25.255Z,1513235725.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:25.653Z,1513235725.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:25.700Z,1513235725.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:26.046Z,1513235726.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:26.067Z,1513235726.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:26.446Z,1513235726.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:26.467Z,1513235726.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:26.835Z,1513235726.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:26.850Z,1513235726.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:27.241Z,1513235727.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:27.256Z,1513235727.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:27.635Z,1513235727.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:27.654Z,1513235727.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:28.038Z,1513235728.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:28.067Z,1513235728.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:28.430Z,1513235728.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:28.463Z,1513235728.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:28.871Z,1513235728.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:28.913Z,1513235728.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:29.254Z,1513235729.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:29.276Z,1513235729.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:29.653Z,1513235729.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:29.668Z,1513235729.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:30.032Z,1513235730.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:30.066Z,1513235730.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:30.428Z,1513235730.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:30.465Z,1513235730.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:30.852Z,1513235730.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:30.867Z,1513235730.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:31.231Z,1513235731.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:31.267Z,1513235731.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:31.649Z,1513235731.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:31.670Z,1513235731.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:32.064Z,1513235732.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:32.111Z,1513235732.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:32.458Z,1513235732.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:32.473Z,1513235732.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:32.843Z,1513235732.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:32.857Z,1513235732.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:33.234Z,1513235733.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:33.257Z,1513235733.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:33.640Z,1513235733.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:33.671Z,1513235733.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:34.045Z,1513235734.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:34.060Z,1513235734.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:34.444Z,1513235734.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:34.459Z,1513235734.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:34.848Z,1513235734.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:34.863Z,1513235734.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:35.266Z,1513235735.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:35.314Z,1513235735.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:35.649Z,1513235735.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:35.671Z,1513235735.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:36.043Z,1513235736.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:36.063Z,1513235736.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:36.444Z,1513235736.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:36.515Z,1513235736.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:36.833Z,1513235736.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:36.860Z,1513235736.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:37.243Z,1513235737.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:37.279Z,1513235737.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:37.653Z,1513235737.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:37.695Z,1513235737.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:38.049Z,1513235738.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:38.064Z,1513235738.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:38.468Z,1513235738.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:38.538Z,1513235738.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:38.842Z,1513235738.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:38.859Z,1513235738.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:39.231Z,1513235739.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:39.263Z,1513235739.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:39.630Z,1513235739.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:39.659Z,1513235739.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:40.035Z,1513235740.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:40.066Z,1513235740.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:40.435Z,1513235740.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:40.466Z,1513235740.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:40.861Z,1513235740.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:40.876Z,1513235740.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:41.255Z,1513235741.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:41.269Z,1513235741.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:41.656Z,1513235741.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:41.680Z,1513235741.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:42.031Z,1513235742.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:42.068Z,1513235742.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:42.431Z,1513235742.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:42.468Z,1513235742.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:42.831Z,1513235742.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:42.866Z,1513235742.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:43.230Z,1513235743.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:43.267Z,1513235743.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:43.656Z,1513235743.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:43.670Z,1513235743.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:44.042Z,1513235744.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:44.069Z,1513235744.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:44.464Z,1513235744.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:44.479Z,1513235744.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:44.868Z,1513235744.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:44.895Z,1513235744.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:45.249Z,1513235745.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:45.264Z,1513235745.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:45.631Z,1513235745.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:45.666Z,1513235745.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:46.036Z,1513235746.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:46.067Z,1513235746.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:46.430Z,1513235746.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:46.453Z,1513235746.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:46.459Z,1513235746.459 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:10:46.2Z
2017-12-14T07:15:46.459Z,1513235746.459 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:15:46.459Z,1513235746.459 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:15:46.842Z,1513235746.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:46.908Z,1513235746.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:47.663Z,1513235747.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:47.679Z,1513235747.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:47.792Z,1513235747.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:47.835Z,1513235747.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:51.356Z,1513235751.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:51.372Z,1513235751.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:51.452Z,1513235751.452 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0156.lzma
2017-12-14T07:15:51.472Z,1513235751.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:51.518Z,1513235751.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:51.842Z,1513235751.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:51.866Z,1513235751.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:52.199Z,1513235752.199 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0156.lzma.bak
2017-12-14T07:15:52.200Z,1513235752.200 [DataOverHttps](INFO): SBD MOMSN=5438234
2017-12-14T07:15:52.248Z,1513235752.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:52.271Z,1513235752.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:53.470Z,1513235753.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:53.491Z,1513235753.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:53.591Z,1513235753.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:53.619Z,1513235753.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:57.166Z,1513235757.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:57.181Z,1513235757.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:57.279Z,1513235757.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:57.299Z,1513235757.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:57.665Z,1513235757.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:57.681Z,1513235757.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:58.063Z,1513235758.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:58.083Z,1513235758.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:58.452Z,1513235758.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:58.484Z,1513235758.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:15:58.851Z,1513235758.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:15:58.914Z,1513235758.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:02.256Z,1513235762.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:02.318Z,1513235762.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:02.392Z,1513235762.392 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0157.lzma
2017-12-14T07:16:02.412Z,1513235762.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:02.427Z,1513235762.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:02.803Z,1513235762.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:02.855Z,1513235762.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:03.163Z,1513235763.163 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0157.lzma.bak
2017-12-14T07:16:03.163Z,1513235763.163 [DataOverHttps](INFO): SBD MOMSN=5438238
2017-12-14T07:16:03.219Z,1513235763.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:03.233Z,1513235763.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:04.318Z,1513235764.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:04.374Z,1513235764.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:04.377Z,1513235764.377 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:16:04.377Z,1513235764.377 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:16:04.377Z,1513235764.377 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:16:04.463Z,1513235764.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:04.478Z,1513235764.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:08.050Z,1513235768.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:08.065Z,1513235768.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:08.179Z,1513235768.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:08.231Z,1513235768.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:08.620Z,1513235768.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:08.657Z,1513235768.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:08.986Z,1513235768.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:09.016Z,1513235769.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:09.382Z,1513235769.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:09.410Z,1513235769.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:09.776Z,1513235769.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:09.791Z,1513235769.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:10.169Z,1513235770.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:10.185Z,1513235770.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:10.600Z,1513235770.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:10.639Z,1513235770.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:10.974Z,1513235770.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:11.000Z,1513235771.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:11.413Z,1513235771.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:11.470Z,1513235771.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:11.771Z,1513235771.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:11.797Z,1513235771.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:12.190Z,1513235772.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:12.238Z,1513235772.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:12.621Z,1513235772.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:12.671Z,1513235772.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:12.980Z,1513235772.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:13.008Z,1513235773.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:13.370Z,1513235773.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:13.385Z,1513235773.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:13.768Z,1513235773.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:13.783Z,1513235773.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:14.175Z,1513235774.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:14.191Z,1513235774.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:14.633Z,1513235774.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:14.686Z,1513235774.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:14.979Z,1513235774.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:14.996Z,1513235774.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:15.378Z,1513235775.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:15.393Z,1513235775.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:15.769Z,1513235775.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:15.784Z,1513235775.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:16.174Z,1513235776.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:16.189Z,1513235776.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:16.612Z,1513235776.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:16.683Z,1513235776.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:16.982Z,1513235776.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:17.009Z,1513235777.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:17.376Z,1513235777.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:17.391Z,1513235777.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:17.780Z,1513235777.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:17.796Z,1513235777.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:18.189Z,1513235778.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:18.204Z,1513235778.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:18.583Z,1513235778.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:18.597Z,1513235778.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:18.965Z,1513235778.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:19.001Z,1513235779.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:19.383Z,1513235779.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:19.415Z,1513235779.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:19.837Z,1513235779.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:19.851Z,1513235779.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:20.173Z,1513235780.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:20.240Z,1513235780.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:20.575Z,1513235780.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:20.619Z,1513235780.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:20.993Z,1513235780.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:21.036Z,1513235781.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:21.036Z,1513235781.036 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135
2017-12-14T07:16:21.036Z,1513235781.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:16:21.046Z,1513235781.046 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:21.046Z,1513235781.046 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 135
2017-12-14T07:16:21.046Z,1513235781.046 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:16:21.048Z,1513235781.048 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:21.125Z,1513235781.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2017-12-14T07:16:21.125Z,1513235781.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:16:21.170Z,1513235781.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:16:21.170Z,1513235781.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:16:21.170Z,1513235781.170 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:16:21.380Z,1513235781.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:21.432Z,1513235781.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:16:21.432Z,1513235781.432 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135
2017-12-14T07:16:21.432Z,1513235781.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:16:21.432Z,1513235781.432 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 135
2017-12-14T07:16:21.437Z,1513235781.437 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:16:21.437Z,1513235781.437 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2017-12-14T07:16:21.773Z,1513235781.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:21.810Z,1513235781.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:16:21.811Z,1513235781.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:16:21.811Z,1513235781.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:16:21.811Z,1513235781.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:16:21.812Z,1513235781.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:16:21.812Z,1513235781.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:16:21.812Z,1513235781.812 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:16:21.821Z,1513235781.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:16:21.821Z,1513235781.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:16:22.187Z,1513235782.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:22.238Z,1513235782.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:22.586Z,1513235782.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:22.633Z,1513235782.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:22.967Z,1513235782.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:23.004Z,1513235783.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:23.371Z,1513235783.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:23.407Z,1513235783.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:23.813Z,1513235783.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:23.828Z,1513235783.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:24.181Z,1513235784.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:24.214Z,1513235784.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:24.597Z,1513235784.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:24.715Z,1513235784.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:24.966Z,1513235784.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:24.999Z,1513235784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:25.374Z,1513235785.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:25.427Z,1513235785.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:25.773Z,1513235785.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:25.787Z,1513235785.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:26.171Z,1513235786.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:26.231Z,1513235786.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:26.647Z,1513235786.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:26.694Z,1513235786.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:26.987Z,1513235786.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:27.009Z,1513235787.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:27.384Z,1513235787.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:27.398Z,1513235787.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:27.762Z,1513235787.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:27.792Z,1513235787.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:28.161Z,1513235788.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:28.189Z,1513235788.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:28.607Z,1513235788.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:28.651Z,1513235788.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:28.967Z,1513235788.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:28.994Z,1513235788.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:29.381Z,1513235789.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:29.395Z,1513235789.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:29.780Z,1513235789.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:29.806Z,1513235789.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:30.206Z,1513235790.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:30.287Z,1513235790.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:30.604Z,1513235790.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:30.661Z,1513235790.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:30.972Z,1513235790.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:30.987Z,1513235790.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:31.369Z,1513235791.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:31.383Z,1513235791.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:31.769Z,1513235791.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:31.783Z,1513235791.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:32.168Z,1513235792.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:32.184Z,1513235792.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:32.577Z,1513235792.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:32.593Z,1513235792.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:32.998Z,1513235792.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:33.062Z,1513235793.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:33.374Z,1513235793.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:33.389Z,1513235793.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:33.772Z,1513235793.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:33.787Z,1513235793.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:34.163Z,1513235794.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:34.194Z,1513235794.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:34.563Z,1513235794.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:34.611Z,1513235794.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:34.968Z,1513235794.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:34.000Z,1513235795.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:35.379Z,1513235795.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:35.408Z,1513235795.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:35.754Z,1513235795.754 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T07:16:35.754Z,1513235795.754 [NAL9602] Data Fault, FailCount= 2
2017-12-14T07:16:35.754Z,1513235795.754 [NAL9602](ERROR): Data Fault
2017-12-14T07:16:35.771Z,1513235795.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:35.787Z,1513235795.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:35.833Z,1513235795.833 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T07:16:36.152Z,1513235796.152 [NAL9602](INFO): Powering down
2017-12-14T07:16:36.183Z,1513235796.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:36.198Z,1513235796.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:36.584Z,1513235796.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:36.598Z,1513235796.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:36.962Z,1513235796.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:36.983Z,1513235796.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:36.997Z,1513235796.997 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T07:16:36.997Z,1513235796.997 [NAL9602] No Fault, FailCount= 2
2017-12-14T07:16:37.362Z,1513235797.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:37.383Z,1513235797.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:37.808Z,1513235797.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:37.839Z,1513235797.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:38.165Z,1513235798.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:38.197Z,1513235798.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:38.597Z,1513235798.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:38.645Z,1513235798.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:38.996Z,1513235798.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:39.020Z,1513235799.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:39.370Z,1513235799.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:39.420Z,1513235799.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:39.783Z,1513235799.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:39.809Z,1513235799.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:40.165Z,1513235800.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:40.208Z,1513235800.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:40.611Z,1513235800.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:40.683Z,1513235800.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:40.972Z,1513235800.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:40.999Z,1513235800.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:41.371Z,1513235801.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:41.387Z,1513235801.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:41.785Z,1513235801.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:41.830Z,1513235801.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:42.162Z,1513235802.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:42.218Z,1513235802.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:42.630Z,1513235802.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:42.663Z,1513235802.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:43.004Z,1513235803.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:43.024Z,1513235803.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:43.366Z,1513235803.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:43.432Z,1513235803.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:43.769Z,1513235803.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:43.783Z,1513235803.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:44.201Z,1513235804.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:44.216Z,1513235804.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:44.628Z,1513235804.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:44.681Z,1513235804.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:45.012Z,1513235805.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:45.053Z,1513235805.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:45.371Z,1513235805.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:45.437Z,1513235805.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:45.773Z,1513235805.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:45.806Z,1513235805.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:46.165Z,1513235806.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:46.264Z,1513235806.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:46.566Z,1513235806.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:46.663Z,1513235806.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:46.965Z,1513235806.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:47.023Z,1513235807.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:47.370Z,1513235807.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:47.436Z,1513235807.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:47.772Z,1513235807.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:47.808Z,1513235807.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:48.171Z,1513235808.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:48.295Z,1513235808.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:48.573Z,1513235808.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:48.623Z,1513235808.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:48.974Z,1513235808.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:48.999Z,1513235808.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:49.371Z,1513235809.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:49.395Z,1513235809.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:49.764Z,1513235809.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:49.814Z,1513235809.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:50.164Z,1513235810.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:50.197Z,1513235810.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:50.596Z,1513235810.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:50.640Z,1513235810.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:50.968Z,1513235810.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:51.043Z,1513235811.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:51.365Z,1513235811.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:51.404Z,1513235811.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:51.764Z,1513235811.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:51.811Z,1513235811.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:52.165Z,1513235812.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:52.212Z,1513235812.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:52.589Z,1513235812.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:52.626Z,1513235812.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:52.964Z,1513235812.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:53.005Z,1513235813.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:53.364Z,1513235813.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:53.403Z,1513235813.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:53.765Z,1513235813.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:53.799Z,1513235813.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:54.164Z,1513235814.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:54.227Z,1513235814.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:54.594Z,1513235814.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:54.652Z,1513235814.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:54.964Z,1513235814.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:55.031Z,1513235815.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:55.368Z,1513235815.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:55.411Z,1513235815.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:55.765Z,1513235815.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:55.810Z,1513235815.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:56.167Z,1513235816.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:56.182Z,1513235816.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:56.615Z,1513235816.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:56.656Z,1513235816.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:56.970Z,1513235816.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:56.984Z,1513235816.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:57.372Z,1513235817.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:57.387Z,1513235817.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:57.770Z,1513235817.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:57.784Z,1513235817.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:58.172Z,1513235818.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:58.231Z,1513235818.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:58.583Z,1513235818.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:58.664Z,1513235818.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:58.975Z,1513235818.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:58.989Z,1513235818.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:59.361Z,1513235819.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:59.395Z,1513235819.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:16:59.767Z,1513235819.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:16:59.782Z,1513235819.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:00.171Z,1513235820.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:00.185Z,1513235820.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:00.571Z,1513235820.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:00.586Z,1513235820.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:00.972Z,1513235820.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:00.987Z,1513235820.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:01.372Z,1513235821.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:01.431Z,1513235821.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:01.778Z,1513235821.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:01.793Z,1513235821.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:02.174Z,1513235822.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:02.188Z,1513235822.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:02.570Z,1513235822.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:02.596Z,1513235822.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:02.981Z,1513235822.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:02.996Z,1513235822.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:03.379Z,1513235823.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:03.394Z,1513235823.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:03.769Z,1513235823.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:03.800Z,1513235823.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:04.171Z,1513235824.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:04.186Z,1513235824.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:04.629Z,1513235824.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:04.685Z,1513235824.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:04.967Z,1513235824.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:04.992Z,1513235824.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:08.446Z,1513235828.446 [NAL9602](INFO): Powering up NAL9602
2017-12-14T07:17:08.463Z,1513235828.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:08.511Z,1513235828.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:08.659Z,1513235828.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:08.699Z,1513235828.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:09.063Z,1513235829.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:09.126Z,1513235829.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:09.446Z,1513235829.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:09.469Z,1513235829.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:09.849Z,1513235829.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:09.915Z,1513235829.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:10.247Z,1513235830.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:10.284Z,1513235830.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:10.644Z,1513235830.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:10.688Z,1513235830.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:11.093Z,1513235831.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:11.132Z,1513235831.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:11.446Z,1513235831.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:11.482Z,1513235831.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:11.844Z,1513235831.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:11.859Z,1513235831.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:12.247Z,1513235832.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:12.278Z,1513235832.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:12.655Z,1513235832.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:12.687Z,1513235832.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:13.050Z,1513235833.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:13.133Z,1513235833.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:13.440Z,1513235833.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:13.455Z,1513235833.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:13.850Z,1513235833.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:13.881Z,1513235833.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:14.284Z,1513235834.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:14.343Z,1513235834.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:14.652Z,1513235834.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:14.683Z,1513235834.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:15.046Z,1513235835.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:15.067Z,1513235835.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:15.450Z,1513235835.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:15.464Z,1513235835.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:15.845Z,1513235835.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:15.860Z,1513235835.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:16.252Z,1513235836.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:16.293Z,1513235836.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:16.684Z,1513235836.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:16.698Z,1513235836.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:17.053Z,1513235837.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:17.068Z,1513235837.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:17.488Z,1513235837.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:17.517Z,1513235837.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:17.855Z,1513235837.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:17.871Z,1513235837.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:18.248Z,1513235838.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:18.263Z,1513235838.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:18.662Z,1513235838.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:18.692Z,1513235838.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:19.069Z,1513235839.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:19.124Z,1513235839.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:19.432Z,1513235839.432 [NAL9602](INFO): NAL9602 initialized
2017-12-14T07:17:19.449Z,1513235839.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:19.464Z,1513235839.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:19.853Z,1513235839.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:19.867Z,1513235839.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:20.266Z,1513235840.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:20.297Z,1513235840.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:20.668Z,1513235840.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:20.699Z,1513235840.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:21.060Z,1513235841.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:21.098Z,1513235841.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:21.457Z,1513235841.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:21.471Z,1513235841.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:21.848Z,1513235841.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:21.871Z,1513235841.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:22.258Z,1513235842.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:22.273Z,1513235842.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:22.655Z,1513235842.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:22.671Z,1513235842.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:23.064Z,1513235843.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:23.080Z,1513235843.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:23.465Z,1513235843.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:23.480Z,1513235843.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:23.888Z,1513235843.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:23.912Z,1513235843.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:24.257Z,1513235844.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:24.272Z,1513235844.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:24.658Z,1513235844.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:24.675Z,1513235844.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:25.065Z,1513235845.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:25.081Z,1513235845.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:25.455Z,1513235845.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:25.472Z,1513235845.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:25.865Z,1513235845.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:25.887Z,1513235845.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:26.266Z,1513235846.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:26.287Z,1513235846.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:26.667Z,1513235846.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:26.691Z,1513235846.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:27.072Z,1513235847.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:27.095Z,1513235847.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:27.447Z,1513235847.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:27.486Z,1513235847.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:27.851Z,1513235847.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:27.882Z,1513235847.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:28.252Z,1513235848.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:28.284Z,1513235848.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:28.655Z,1513235848.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:28.686Z,1513235848.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:29.059Z,1513235849.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:29.081Z,1513235849.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:29.481Z,1513235849.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:29.496Z,1513235849.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:29.871Z,1513235849.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:29.891Z,1513235849.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:30.298Z,1513235850.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:30.307Z,1513235850.307 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:17:30.307Z,1513235850.307 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:17:30.307Z,1513235850.307 [BPC1](ERROR): Data Fault
2017-12-14T07:17:30.324Z,1513235850.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:30.393Z,1513235850.393 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:17:30.649Z,1513235850.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:30.681Z,1513235850.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:31.054Z,1513235851.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:31.080Z,1513235851.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:31.445Z,1513235851.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:31.475Z,1513235851.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:31.490Z,1513235851.490 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:17:31.490Z,1513235851.490 [BPC1] No Fault, FailCount= 1
2017-12-14T07:17:31.867Z,1513235851.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:31.927Z,1513235851.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:32.272Z,1513235852.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:32.288Z,1513235852.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:32.671Z,1513235852.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:32.688Z,1513235852.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:33.047Z,1513235853.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:33.079Z,1513235853.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:33.451Z,1513235853.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:33.551Z,1513235853.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:33.846Z,1513235853.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:33.873Z,1513235853.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:34.248Z,1513235854.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:34.275Z,1513235854.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:34.647Z,1513235854.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:34.673Z,1513235854.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:35.071Z,1513235855.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:35.086Z,1513235855.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:35.493Z,1513235855.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:35.527Z,1513235855.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:35.872Z,1513235855.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:35.886Z,1513235855.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:36.247Z,1513235856.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:36.274Z,1513235856.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:36.682Z,1513235856.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:36.730Z,1513235856.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:37.047Z,1513235857.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:37.079Z,1513235857.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:37.446Z,1513235857.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:37.479Z,1513235857.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:37.865Z,1513235857.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:37.894Z,1513235857.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:38.275Z,1513235858.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:38.290Z,1513235858.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:38.667Z,1513235858.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:38.682Z,1513235858.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:39.078Z,1513235859.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:39.094Z,1513235859.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:39.447Z,1513235859.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:39.479Z,1513235859.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:39.867Z,1513235859.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:39.891Z,1513235859.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:40.247Z,1513235860.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:40.296Z,1513235860.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:40.667Z,1513235860.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:40.682Z,1513235860.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:41.065Z,1513235861.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:41.080Z,1513235861.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:41.470Z,1513235861.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:41.485Z,1513235861.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:41.869Z,1513235861.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:41.974Z,1513235861.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:42.259Z,1513235862.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:42.274Z,1513235862.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:42.646Z,1513235862.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:42.672Z,1513235862.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:43.048Z,1513235863.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:43.075Z,1513235863.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:43.447Z,1513235863.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:43.473Z,1513235863.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:43.864Z,1513235863.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:43.884Z,1513235863.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:44.269Z,1513235864.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:44.291Z,1513235864.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:44.669Z,1513235864.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:44.684Z,1513235864.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:45.047Z,1513235865.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:45.072Z,1513235865.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:45.459Z,1513235865.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:45.495Z,1513235865.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:45.846Z,1513235865.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:45.882Z,1513235865.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:46.258Z,1513235866.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:46.310Z,1513235866.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:46.647Z,1513235866.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:46.673Z,1513235866.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:47.069Z,1513235867.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:47.084Z,1513235867.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:47.473Z,1513235867.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:47.488Z,1513235867.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:47.871Z,1513235867.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:47.891Z,1513235867.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:48.260Z,1513235868.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:48.275Z,1513235868.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:48.646Z,1513235868.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:48.683Z,1513235868.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:49.060Z,1513235869.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:49.075Z,1513235869.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:49.483Z,1513235869.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:49.523Z,1513235869.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:49.877Z,1513235869.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:49.892Z,1513235869.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:50.270Z,1513235870.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:50.291Z,1513235870.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:50.658Z,1513235870.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:50.687Z,1513235870.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:51.054Z,1513235871.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:51.076Z,1513235871.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:51.447Z,1513235871.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:51.483Z,1513235871.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:51.847Z,1513235871.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:51.903Z,1513235871.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:52.251Z,1513235872.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:52.289Z,1513235872.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:52.660Z,1513235872.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:52.732Z,1513235872.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:53.076Z,1513235873.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:53.091Z,1513235873.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:53.477Z,1513235873.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:53.532Z,1513235873.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:53.862Z,1513235873.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:53.895Z,1513235873.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:54.253Z,1513235874.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:54.268Z,1513235874.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:54.670Z,1513235874.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:54.695Z,1513235874.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:55.057Z,1513235875.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:55.072Z,1513235875.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:55.455Z,1513235875.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:55.475Z,1513235875.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:55.863Z,1513235875.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:55.903Z,1513235875.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:56.261Z,1513235876.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:56.276Z,1513235876.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:56.669Z,1513235876.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:56.684Z,1513235876.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:57.055Z,1513235877.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:57.070Z,1513235877.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:57.460Z,1513235877.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:57.475Z,1513235877.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:57.858Z,1513235877.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:57.874Z,1513235877.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:58.255Z,1513235878.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:58.269Z,1513235878.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:58.657Z,1513235878.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:58.672Z,1513235878.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:59.102Z,1513235879.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:59.125Z,1513235879.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:59.469Z,1513235879.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:59.484Z,1513235879.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:17:59.866Z,1513235879.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:17:59.888Z,1513235879.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:00.247Z,1513235880.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:00.272Z,1513235880.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:00.646Z,1513235880.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:00.683Z,1513235880.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:01.048Z,1513235881.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:01.075Z,1513235881.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:01.451Z,1513235881.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:01.478Z,1513235881.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:01.868Z,1513235881.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:01.913Z,1513235881.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:02.277Z,1513235882.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:02.325Z,1513235882.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:02.668Z,1513235882.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:02.682Z,1513235882.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:03.047Z,1513235883.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:03.084Z,1513235883.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:03.446Z,1513235883.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:03.486Z,1513235883.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:03.851Z,1513235883.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:03.883Z,1513235883.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:04.264Z,1513235884.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:04.280Z,1513235884.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:04.647Z,1513235884.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:04.676Z,1513235884.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:05.082Z,1513235885.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:05.098Z,1513235885.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:08.499Z,1513235888.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:08.547Z,1513235888.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:08.726Z,1513235888.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:08.788Z,1513235888.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:09.079Z,1513235889.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:09.115Z,1513235889.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:09.483Z,1513235889.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:09.514Z,1513235889.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:09.880Z,1513235889.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:09.895Z,1513235889.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:10.283Z,1513235890.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:10.298Z,1513235890.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:10.694Z,1513235890.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:10.722Z,1513235890.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:11.094Z,1513235891.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:11.118Z,1513235891.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:11.509Z,1513235891.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:11.525Z,1513235891.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:11.883Z,1513235891.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:11.898Z,1513235891.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:12.289Z,1513235892.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:12.304Z,1513235892.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:12.698Z,1513235892.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:12.728Z,1513235892.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:13.102Z,1513235893.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:13.151Z,1513235893.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:13.502Z,1513235893.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:13.525Z,1513235893.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:13.883Z,1513235893.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:13.923Z,1513235893.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:14.286Z,1513235894.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:14.300Z,1513235894.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:14.690Z,1513235894.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:14.738Z,1513235894.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:15.101Z,1513235895.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:15.140Z,1513235895.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:15.499Z,1513235895.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:15.514Z,1513235895.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:15.886Z,1513235895.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:15.906Z,1513235895.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:16.278Z,1513235896.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:16.320Z,1513235896.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:16.690Z,1513235896.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:16.715Z,1513235896.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:17.095Z,1513235897.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:17.131Z,1513235897.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:17.515Z,1513235897.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:17.535Z,1513235897.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:17.883Z,1513235897.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:17.898Z,1513235897.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:18.298Z,1513235898.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:18.331Z,1513235898.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:18.689Z,1513235898.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:18.711Z,1513235898.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:19.102Z,1513235899.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:19.132Z,1513235899.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:19.502Z,1513235899.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:19.516Z,1513235899.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:19.890Z,1513235899.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:19.905Z,1513235899.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:20.284Z,1513235900.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:20.299Z,1513235900.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:20.692Z,1513235900.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:20.707Z,1513235900.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:21.101Z,1513235901.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:21.116Z,1513235901.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:21.529Z,1513235901.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:21.597Z,1513235901.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:21.889Z,1513235901.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:21.904Z,1513235901.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:22.286Z,1513235902.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:22.301Z,1513235902.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:22.696Z,1513235902.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:22.712Z,1513235902.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:23.096Z,1513235903.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:23.151Z,1513235903.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:23.498Z,1513235903.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:23.513Z,1513235903.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:23.897Z,1513235903.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:23.911Z,1513235903.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:24.282Z,1513235904.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:24.306Z,1513235904.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:24.710Z,1513235904.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:24.749Z,1513235904.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:25.105Z,1513235905.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:25.120Z,1513235905.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:25.502Z,1513235905.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:25.516Z,1513235905.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:25.892Z,1513235905.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:25.906Z,1513235905.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:26.293Z,1513235906.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:26.308Z,1513235906.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:26.702Z,1513235906.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:26.716Z,1513235906.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:27.100Z,1513235907.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:27.116Z,1513235907.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:27.495Z,1513235907.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:27.520Z,1513235907.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:27.891Z,1513235907.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:27.906Z,1513235907.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:28.311Z,1513235908.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:28.326Z,1513235908.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:28.700Z,1513235908.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:28.715Z,1513235908.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:29.105Z,1513235909.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:29.121Z,1513235909.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:29.497Z,1513235909.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:29.519Z,1513235909.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:29.879Z,1513235909.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:29.916Z,1513235909.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:30.287Z,1513235910.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:30.319Z,1513235910.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:30.713Z,1513235910.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:30.735Z,1513235910.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:31.125Z,1513235911.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:31.156Z,1513235911.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:31.490Z,1513235911.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:31.518Z,1513235911.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:31.879Z,1513235911.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:31.916Z,1513235911.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:32.279Z,1513235912.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:32.299Z,1513235912.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:32.686Z,1513235912.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:32.701Z,1513235912.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:33.098Z,1513235913.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:33.133Z,1513235913.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:33.502Z,1513235913.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:33.532Z,1513235913.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:33.902Z,1513235913.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:33.959Z,1513235913.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:34.299Z,1513235914.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:34.384Z,1513235914.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:34.689Z,1513235914.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:34.703Z,1513235914.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:35.100Z,1513235915.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:35.115Z,1513235915.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:35.483Z,1513235915.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:35.505Z,1513235915.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:35.898Z,1513235915.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:35.948Z,1513235915.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:36.300Z,1513235916.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:36.323Z,1513235916.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:36.700Z,1513235916.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:36.764Z,1513235916.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:37.093Z,1513235917.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:37.107Z,1513235917.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:37.491Z,1513235917.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:37.548Z,1513235917.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:37.880Z,1513235917.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:37.907Z,1513235917.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:38.278Z,1513235918.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:38.313Z,1513235918.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:38.697Z,1513235918.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:38.716Z,1513235918.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:39.101Z,1513235919.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:39.116Z,1513235919.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:39.503Z,1513235919.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:39.518Z,1513235919.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:39.893Z,1513235919.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:39.908Z,1513235919.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:40.279Z,1513235920.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:40.314Z,1513235920.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:40.723Z,1513235920.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:40.761Z,1513235920.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:41.101Z,1513235921.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:41.123Z,1513235921.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:41.490Z,1513235921.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:41.523Z,1513235921.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:41.884Z,1513235921.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:41.916Z,1513235921.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:42.284Z,1513235922.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:42.319Z,1513235922.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:42.691Z,1513235922.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:42.718Z,1513235922.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:43.098Z,1513235923.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:43.125Z,1513235923.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:43.490Z,1513235923.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:43.505Z,1513235923.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:43.890Z,1513235923.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:43.906Z,1513235923.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:44.284Z,1513235924.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:44.312Z,1513235924.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:44.697Z,1513235924.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:44.712Z,1513235924.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:45.097Z,1513235925.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:45.147Z,1513235925.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:45.497Z,1513235925.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:45.512Z,1513235925.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:45.894Z,1513235925.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:45.909Z,1513235925.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:46.289Z,1513235926.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:46.304Z,1513235926.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:46.696Z,1513235926.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:46.724Z,1513235926.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:47.122Z,1513235927.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:47.151Z,1513235927.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:47.499Z,1513235927.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:47.514Z,1513235927.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:47.879Z,1513235927.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:47.911Z,1513235927.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:48.284Z,1513235928.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:48.310Z,1513235928.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:48.683Z,1513235928.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:48.709Z,1513235928.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:49.094Z,1513235929.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:49.117Z,1513235929.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:49.509Z,1513235929.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:49.531Z,1513235929.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:49.897Z,1513235929.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:49.923Z,1513235929.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:50.309Z,1513235930.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:50.344Z,1513235930.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:50.683Z,1513235930.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:50.703Z,1513235930.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:51.084Z,1513235931.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:51.106Z,1513235931.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:51.484Z,1513235931.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:51.499Z,1513235931.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:51.892Z,1513235931.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:51.909Z,1513235931.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:52.294Z,1513235932.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:52.308Z,1513235932.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:52.698Z,1513235932.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:52.715Z,1513235932.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:53.089Z,1513235933.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:53.110Z,1513235933.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:53.521Z,1513235933.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:53.557Z,1513235933.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:53.880Z,1513235933.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:53.908Z,1513235933.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:54.279Z,1513235934.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:54.307Z,1513235934.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:54.694Z,1513235934.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:54.723Z,1513235934.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:55.110Z,1513235935.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:55.126Z,1513235935.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:55.501Z,1513235935.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:55.529Z,1513235935.529 [BPC1](ERROR): Failed to parse message.
2017-12-14T07:18:55.529Z,1513235935.529 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:18:55.529Z,1513235935.529 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:18:55.529Z,1513235935.529 [BPC1](ERROR): Data Fault
2017-12-14T07:18:55.572Z,1513235935.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:55.602Z,1513235935.602 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:18:55.887Z,1513235935.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:55.915Z,1513235935.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:56.279Z,1513235936.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:56.316Z,1513235936.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:56.689Z,1513235936.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:56.759Z,1513235936.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:56.790Z,1513235936.790 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:18:56.791Z,1513235936.791 [BPC1] No Fault, FailCount= 1
2017-12-14T07:18:57.101Z,1513235937.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:57.186Z,1513235937.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:57.492Z,1513235937.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:57.511Z,1513235937.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:57.881Z,1513235937.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:57.896Z,1513235937.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:58.288Z,1513235938.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:58.315Z,1513235938.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:58.693Z,1513235938.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:58.708Z,1513235938.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:59.097Z,1513235939.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:59.119Z,1513235939.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:59.496Z,1513235939.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:59.511Z,1513235939.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:18:59.905Z,1513235939.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:18:59.968Z,1513235939.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:00.287Z,1513235940.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:00.307Z,1513235940.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:00.697Z,1513235940.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:00.712Z,1513235940.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:01.098Z,1513235941.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:01.127Z,1513235941.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:01.498Z,1513235941.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:01.513Z,1513235941.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:01.879Z,1513235941.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:01.910Z,1513235941.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:02.278Z,1513235942.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:02.311Z,1513235942.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:02.699Z,1513235942.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:02.713Z,1513235942.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:03.130Z,1513235943.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:03.155Z,1513235943.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:03.499Z,1513235943.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:03.519Z,1513235943.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:03.876Z,1513235943.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:03.911Z,1513235943.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:04.279Z,1513235944.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:04.311Z,1513235944.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:04.679Z,1513235944.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:04.703Z,1513235944.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:05.094Z,1513235945.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:05.123Z,1513235945.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:08.518Z,1513235948.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:08.556Z,1513235948.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:08.670Z,1513235948.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:08.710Z,1513235948.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:09.020Z,1513235949.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:09.054Z,1513235949.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:09.414Z,1513235949.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:09.429Z,1513235949.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:09.454Z,1513235949.454 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:19:09.812Z,1513235949.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:09.828Z,1513235949.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:10.211Z,1513235950.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:10.226Z,1513235950.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:10.613Z,1513235950.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:10.658Z,1513235950.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:11.026Z,1513235951.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:11.052Z,1513235951.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:11.418Z,1513235951.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:11.433Z,1513235951.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:11.826Z,1513235951.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:11.840Z,1513235951.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:12.212Z,1513235952.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:12.229Z,1513235952.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:12.651Z,1513235952.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:12.682Z,1513235952.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:13.007Z,1513235953.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:13.039Z,1513235953.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:13.415Z,1513235953.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:13.431Z,1513235953.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:13.825Z,1513235953.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:13.841Z,1513235953.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:14.226Z,1513235954.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:14.241Z,1513235954.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:14.626Z,1513235954.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:14.647Z,1513235954.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:15.012Z,1513235955.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:15.031Z,1513235955.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:15.406Z,1513235955.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:15.436Z,1513235955.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:15.839Z,1513235955.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:15.876Z,1513235955.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:16.203Z,1513235956.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:16.239Z,1513235956.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:16.619Z,1513235956.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:16.639Z,1513235956.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:17.018Z,1513235957.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:17.050Z,1513235957.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:17.426Z,1513235957.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:17.441Z,1513235957.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:17.827Z,1513235957.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:17.842Z,1513235957.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:18.204Z,1513235958.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:18.231Z,1513235958.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:18.652Z,1513235958.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:18.692Z,1513235958.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:19.031Z,1513235959.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:19.107Z,1513235959.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:19.410Z,1513235959.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:19.460Z,1513235959.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:19.820Z,1513235959.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:19.836Z,1513235959.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:20.221Z,1513235960.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:20.264Z,1513235960.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:20.621Z,1513235960.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:20.636Z,1513235960.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.010Z,1513235961.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:21.065Z,1513235961.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.415Z,1513235961.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:21.430Z,1513235961.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.810Z,1513235961.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:21.824Z,1513235961.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.824Z,1513235961.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136
2017-12-14T07:19:21.824Z,1513235961.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:19:21.826Z,1513235961.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.827Z,1513235961.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 136
2017-12-14T07:19:21.827Z,1513235961.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:19:21.828Z,1513235961.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:21.829Z,1513235961.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2017-12-14T07:19:21.829Z,1513235961.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:19:21.841Z,1513235961.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:19:21.841Z,1513235961.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:19:21.841Z,1513235961.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:19:22.211Z,1513235962.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:22.276Z,1513235962.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:19:22.276Z,1513235962.276 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136
2017-12-14T07:19:22.277Z,1513235962.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:19:22.277Z,1513235962.277 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 136
2017-12-14T07:19:22.277Z,1513235962.277 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:19:22.278Z,1513235962.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2017-12-14T07:19:22.622Z,1513235962.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:22.635Z,1513235962.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:19:22.635Z,1513235962.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:19:22.635Z,1513235962.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:19:22.636Z,1513235962.636 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:19:22.636Z,1513235962.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:19:22.636Z,1513235962.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:19:22.637Z,1513235962.637 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:19:22.637Z,1513235962.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:19:22.638Z,1513235962.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:19:23.034Z,1513235963.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:23.048Z,1513235963.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:23.426Z,1513235963.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:23.440Z,1513235963.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:23.822Z,1513235963.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:23.838Z,1513235963.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:24.214Z,1513235964.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:24.235Z,1513235964.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:24.625Z,1513235964.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:24.647Z,1513235964.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:25.014Z,1513235965.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:25.029Z,1513235965.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:25.432Z,1513235965.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:25.472Z,1513235965.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:25.820Z,1513235965.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:25.836Z,1513235965.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:26.224Z,1513235966.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:26.239Z,1513235966.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:26.629Z,1513235966.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:26.646Z,1513235966.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:27.023Z,1513235967.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:27.038Z,1513235967.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:27.413Z,1513235967.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:27.427Z,1513235967.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:27.800Z,1513235967.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:27.832Z,1513235967.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:28.203Z,1513235968.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:28.236Z,1513235968.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:28.640Z,1513235968.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:28.698Z,1513235968.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:29.023Z,1513235969.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:29.037Z,1513235969.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:29.429Z,1513235969.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:29.476Z,1513235969.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:29.826Z,1513235969.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:29.841Z,1513235969.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:30.217Z,1513235970.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:30.232Z,1513235970.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:30.616Z,1513235970.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:30.645Z,1513235970.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:31.004Z,1513235971.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:31.035Z,1513235971.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:31.403Z,1513235971.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:31.435Z,1513235971.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:31.856Z,1513235971.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:31.899Z,1513235971.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:32.230Z,1513235972.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:32.251Z,1513235972.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:32.671Z,1513235972.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:32.691Z,1513235972.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:33.002Z,1513235973.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:33.035Z,1513235973.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:33.416Z,1513235973.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:33.431Z,1513235973.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:33.800Z,1513235973.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:33.827Z,1513235973.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:34.204Z,1513235974.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:34.229Z,1513235974.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:34.608Z,1513235974.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:34.635Z,1513235974.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:35.038Z,1513235975.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:35.055Z,1513235975.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:35.432Z,1513235975.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:35.455Z,1513235975.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:35.822Z,1513235975.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:35.837Z,1513235975.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:36.203Z,1513235976.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:36.228Z,1513235976.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:36.606Z,1513235976.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:36.632Z,1513235976.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:37.004Z,1513235977.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:37.031Z,1513235977.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:37.403Z,1513235977.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:37.435Z,1513235977.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:37.819Z,1513235977.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:37.839Z,1513235977.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:38.258Z,1513235978.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:38.291Z,1513235978.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:38.628Z,1513235978.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:38.652Z,1513235978.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:39.011Z,1513235979.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:39.047Z,1513235979.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:39.408Z,1513235979.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:39.440Z,1513235979.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:39.803Z,1513235979.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:39.840Z,1513235979.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:40.203Z,1513235980.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:40.251Z,1513235980.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:40.611Z,1513235980.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:40.680Z,1513235980.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:41.017Z,1513235981.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:41.048Z,1513235981.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:41.442Z,1513235981.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:41.463Z,1513235981.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:41.826Z,1513235981.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:41.883Z,1513235981.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:42.208Z,1513235982.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:42.223Z,1513235982.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:42.621Z,1513235982.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:42.667Z,1513235982.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:43.014Z,1513235983.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:43.029Z,1513235983.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:43.408Z,1513235983.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:43.435Z,1513235983.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:43.825Z,1513235983.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:43.840Z,1513235983.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:44.226Z,1513235984.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:44.260Z,1513235984.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:44.651Z,1513235984.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:44.683Z,1513235984.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:45.011Z,1513235985.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:45.026Z,1513235985.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:45.418Z,1513235985.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:45.432Z,1513235985.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:45.812Z,1513235985.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:45.830Z,1513235985.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:46.215Z,1513235986.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:46.230Z,1513235986.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:46.650Z,1513235986.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:46.684Z,1513235986.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:47.018Z,1513235987.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:47.041Z,1513235987.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:47.426Z,1513235987.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:47.441Z,1513235987.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:47.840Z,1513235987.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:47.864Z,1513235987.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:48.202Z,1513235988.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:48.218Z,1513235988.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:48.606Z,1513235988.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:48.621Z,1513235988.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:49.024Z,1513235989.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:49.052Z,1513235989.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:49.403Z,1513235989.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:49.424Z,1513235989.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:49.817Z,1513235989.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:49.845Z,1513235989.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:50.225Z,1513235990.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:50.251Z,1513235990.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:50.622Z,1513235990.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:50.646Z,1513235990.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:51.019Z,1513235991.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:51.094Z,1513235991.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:51.408Z,1513235991.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:51.423Z,1513235991.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:51.808Z,1513235991.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:51.835Z,1513235991.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:52.213Z,1513235992.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:52.228Z,1513235992.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:52.626Z,1513235992.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:52.640Z,1513235992.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:53.017Z,1513235993.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:53.032Z,1513235993.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:53.418Z,1513235993.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:53.433Z,1513235993.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:53.817Z,1513235993.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:53.831Z,1513235993.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:54.247Z,1513235994.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:54.276Z,1513235994.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:54.617Z,1513235994.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:54.660Z,1513235994.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:55.018Z,1513235995.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:55.039Z,1513235995.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:55.417Z,1513235995.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:55.432Z,1513235995.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:55.822Z,1513235995.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:55.836Z,1513235995.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:56.220Z,1513235996.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:56.236Z,1513235996.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:56.623Z,1513235996.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:56.664Z,1513235996.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:57.015Z,1513235997.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:57.030Z,1513235997.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:57.436Z,1513235997.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:57.475Z,1513235997.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:57.809Z,1513235997.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:57.830Z,1513235997.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:58.215Z,1513235998.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:58.232Z,1513235998.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:58.621Z,1513235998.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:58.641Z,1513235998.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:59.022Z,1513235999.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:59.037Z,1513235999.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:59.426Z,1513235999.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:59.443Z,1513235999.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:19:59.826Z,1513235999.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:19:59.847Z,1513235999.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:00.209Z,1513236000.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:00.236Z,1513236000.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:00.720Z,1513236000.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:00.759Z,1513236000.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:01.012Z,1513236001.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:01.028Z,1513236001.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:01.413Z,1513236001.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:01.429Z,1513236001.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:01.826Z,1513236001.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:01.875Z,1513236001.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:02.225Z,1513236002.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:02.279Z,1513236002.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:02.627Z,1513236002.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:02.656Z,1513236002.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:03.011Z,1513236003.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:03.027Z,1513236003.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:03.410Z,1513236003.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:03.459Z,1513236003.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:03.808Z,1513236003.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:03.839Z,1513236003.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:04.203Z,1513236004.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:04.256Z,1513236004.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:04.608Z,1513236004.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:04.634Z,1513236004.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:05.017Z,1513236005.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:05.047Z,1513236005.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:05.428Z,1513236005.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:05.444Z,1513236005.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:09.066Z,1513236009.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:09.095Z,1513236009.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:09.197Z,1513236009.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:09.212Z,1513236009.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:09.550Z,1513236009.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:09.571Z,1513236009.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:09.955Z,1513236009.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:09.994Z,1513236009.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:10.351Z,1513236010.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:10.367Z,1513236010.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:10.784Z,1513236010.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:10.799Z,1513236010.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:11.168Z,1513236011.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:11.201Z,1513236011.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:11.563Z,1513236011.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:11.607Z,1513236011.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:11.975Z,1513236011.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:12.014Z,1513236012.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:12.340Z,1513236012.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:12.404Z,1513236012.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:12.742Z,1513236012.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:12.768Z,1513236012.768 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T07:20:12.803Z,1513236012.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:13.148Z,1513236013.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:13.205Z,1513236013.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:13.552Z,1513236013.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:13.567Z,1513236013.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:13.971Z,1513236013.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:14.011Z,1513236014.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:14.425Z,1513236014.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:14.472Z,1513236014.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:14.763Z,1513236014.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:14.811Z,1513236014.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:15.154Z,1513236015.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:15.183Z,1513236015.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:15.543Z,1513236015.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:15.577Z,1513236015.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:15.965Z,1513236015.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:15.980Z,1513236015.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:16.355Z,1513236016.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:16.394Z,1513236016.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:16.765Z,1513236016.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:16.787Z,1513236016.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:17.174Z,1513236017.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:17.189Z,1513236017.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:17.595Z,1513236017.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:17.633Z,1513236017.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:17.943Z,1513236017.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:17.975Z,1513236017.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:18.347Z,1513236018.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:18.381Z,1513236018.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:18.747Z,1513236018.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:18.781Z,1513236018.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:19.143Z,1513236019.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:19.183Z,1513236019.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:19.542Z,1513236019.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:19.593Z,1513236019.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:19.966Z,1513236019.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:19.992Z,1513236019.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:20.373Z,1513236020.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:20.391Z,1513236020.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:20.796Z,1513236020.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:20.832Z,1513236020.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:21.148Z,1513236021.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:21.190Z,1513236021.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:21.542Z,1513236021.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:21.557Z,1513236021.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:21.951Z,1513236021.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:21.987Z,1513236021.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:22.354Z,1513236022.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:22.382Z,1513236022.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:22.766Z,1513236022.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:22.803Z,1513236022.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:23.165Z,1513236023.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:23.219Z,1513236023.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:23.554Z,1513236023.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:23.593Z,1513236023.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:23.997Z,1513236023.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:24.088Z,1513236024.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:24.353Z,1513236024.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:24.402Z,1513236024.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:24.751Z,1513236024.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:24.775Z,1513236024.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:25.148Z,1513236025.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:25.202Z,1513236025.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:25.556Z,1513236025.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:25.574Z,1513236025.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:25.958Z,1513236025.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:26.018Z,1513236026.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:26.361Z,1513236026.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:26.400Z,1513236026.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:26.758Z,1513236026.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:26.780Z,1513236026.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:27.152Z,1513236027.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:27.215Z,1513236027.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:27.550Z,1513236027.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:27.604Z,1513236027.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:27.955Z,1513236027.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:27.970Z,1513236027.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:28.356Z,1513236028.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:28.379Z,1513236028.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:28.763Z,1513236028.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:28.778Z,1513236028.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:29.164Z,1513236029.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:29.202Z,1513236029.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:29.562Z,1513236029.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:29.584Z,1513236029.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:29.954Z,1513236029.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:29.976Z,1513236029.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:30.388Z,1513236030.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:30.424Z,1513236030.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:30.743Z,1513236030.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:30.791Z,1513236030.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:31.151Z,1513236031.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:31.195Z,1513236031.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:31.552Z,1513236031.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:31.591Z,1513236031.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:31.963Z,1513236031.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:31.987Z,1513236031.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:32.361Z,1513236032.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:32.394Z,1513236032.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:32.762Z,1513236032.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:32.802Z,1513236032.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:33.150Z,1513236033.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:33.187Z,1513236033.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:33.587Z,1513236033.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:33.640Z,1513236033.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:33.953Z,1513236033.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:34.001Z,1513236034.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:34.348Z,1513236034.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:34.410Z,1513236034.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:34.775Z,1513236034.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:34.799Z,1513236034.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:35.169Z,1513236035.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:35.197Z,1513236035.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:35.566Z,1513236035.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:35.601Z,1513236035.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:35.952Z,1513236035.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:35.966Z,1513236035.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:36.352Z,1513236036.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:36.378Z,1513236036.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:36.761Z,1513236036.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:36.800Z,1513236036.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:37.153Z,1513236037.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:37.207Z,1513236037.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:37.546Z,1513236037.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:37.586Z,1513236037.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:37.972Z,1513236037.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:37.987Z,1513236037.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:38.374Z,1513236038.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:38.388Z,1513236038.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:38.765Z,1513236038.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:38.807Z,1513236038.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:39.143Z,1513236039.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:39.190Z,1513236039.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:39.547Z,1513236039.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:39.581Z,1513236039.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:39.985Z,1513236039.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:40.067Z,1513236040.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:40.343Z,1513236040.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:40.379Z,1513236040.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:40.763Z,1513236040.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:40.784Z,1513236040.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:41.169Z,1513236041.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:41.200Z,1513236041.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:41.566Z,1513236041.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:41.589Z,1513236041.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:41.942Z,1513236041.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:41.980Z,1513236041.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:42.347Z,1513236042.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:42.389Z,1513236042.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:42.743Z,1513236042.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:42.783Z,1513236042.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:43.194Z,1513236043.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:43.238Z,1513236043.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:43.555Z,1513236043.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:43.597Z,1513236043.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:43.973Z,1513236043.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:43.994Z,1513236043.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:44.377Z,1513236044.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:44.392Z,1513236044.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:44.771Z,1513236044.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:44.786Z,1513236044.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:45.162Z,1513236045.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:45.208Z,1513236045.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:45.554Z,1513236045.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:45.569Z,1513236045.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:45.955Z,1513236045.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:45.976Z,1513236045.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:46.390Z,1513236046.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:46.411Z,1513236046.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:46.756Z,1513236046.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:46.801Z,1513236046.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:47.195Z,1513236047.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:47.251Z,1513236047.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:47.571Z,1513236047.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:47.586Z,1513236047.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:47.965Z,1513236047.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:48.007Z,1513236048.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:48.358Z,1513236048.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:48.408Z,1513236048.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:48.743Z,1513236048.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:48.814Z,1513236048.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:49.143Z,1513236049.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:49.182Z,1513236049.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:49.547Z,1513236049.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:49.629Z,1513236049.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:49.963Z,1513236049.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:50.007Z,1513236050.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:50.362Z,1513236050.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:50.394Z,1513236050.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:50.770Z,1513236050.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:50.793Z,1513236050.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:51.154Z,1513236051.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:51.183Z,1513236051.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:51.551Z,1513236051.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:51.590Z,1513236051.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:51.950Z,1513236051.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:51.991Z,1513236051.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:52.343Z,1513236052.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:52.361Z,1513236052.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:52.768Z,1513236052.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:52.798Z,1513236052.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:53.180Z,1513236053.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:53.203Z,1513236053.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:53.558Z,1513236053.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:53.594Z,1513236053.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:53.955Z,1513236053.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:53.990Z,1513236053.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:54.353Z,1513236054.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:54.391Z,1513236054.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:54.753Z,1513236054.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:54.795Z,1513236054.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:55.150Z,1513236055.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:55.165Z,1513236055.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:55.551Z,1513236055.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:55.572Z,1513236055.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:56.020Z,1513236056.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:56.055Z,1513236056.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:56.362Z,1513236056.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:56.399Z,1513236056.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:56.767Z,1513236056.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:56.841Z,1513236056.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:57.148Z,1513236057.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:57.210Z,1513236057.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:57.560Z,1513236057.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:57.574Z,1513236057.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:57.957Z,1513236057.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:57.999Z,1513236057.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:58.356Z,1513236058.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:58.399Z,1513236058.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:58.757Z,1513236058.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:58.780Z,1513236058.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:59.202Z,1513236059.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:59.258Z,1513236059.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:59.558Z,1513236059.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:59.603Z,1513236059.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:20:59.951Z,1513236059.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:20:59.966Z,1513236059.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:00.356Z,1513236060.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:00.377Z,1513236060.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:00.761Z,1513236060.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:00.775Z,1513236060.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:01.150Z,1513236061.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:01.175Z,1513236061.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:01.554Z,1513236061.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:01.569Z,1513236061.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:01.958Z,1513236061.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:01.980Z,1513236061.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:02.402Z,1513236062.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:02.430Z,1513236062.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:02.763Z,1513236062.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:02.793Z,1513236062.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:03.163Z,1513236063.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:03.191Z,1513236063.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:03.543Z,1513236063.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:03.583Z,1513236063.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:03.961Z,1513236063.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:03.982Z,1513236063.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:04.342Z,1513236064.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:04.390Z,1513236064.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:04.765Z,1513236064.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:04.787Z,1513236064.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:04.790Z,1513236064.790 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T07:21:04.790Z,1513236064.790 [Default:CheckIn:C.Wait] Stopped
2017-12-14T07:21:04.790Z,1513236064.790 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T07:21:04.790Z,1513236064.790 [Default:CheckIn:D] Running Loop=1
2017-12-14T07:21:05.173Z,1513236065.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:05.187Z,1513236065.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:05.191Z,1513236065.191 [Default:CheckIn:D] Stopped
2017-12-14T07:21:05.191Z,1513236065.191 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:21:05.564Z,1513236065.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:05.595Z,1513236065.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:05.603Z,1513236065.603 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 407.830013 min 
2017-12-14T07:21:05.603Z,1513236065.603 [Default:CheckIn:E] Stopped
2017-12-14T07:21:05.603Z,1513236065.603 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:21:05.603Z,1513236065.603 [Default:CheckIn] Stopped
2017-12-14T07:21:05.603Z,1513236065.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:21:05.604Z,1513236065.604 [Default:CheckIn](INFO): Running loop #40
2017-12-14T07:21:05.604Z,1513236065.604 [Default:CheckIn] Running Loop=40
2017-12-14T07:21:05.604Z,1513236065.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:21:05.604Z,1513236065.604 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:21:09.080Z,1513236069.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:09.162Z,1513236069.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:09.256Z,1513236069.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:09.294Z,1513236069.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:09.638Z,1513236069.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:09.687Z,1513236069.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:10.038Z,1513236070.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:10.059Z,1513236070.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:10.438Z,1513236070.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:10.487Z,1513236070.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:10.840Z,1513236070.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:10.854Z,1513236070.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:11.230Z,1513236071.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:11.244Z,1513236071.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:11.635Z,1513236071.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:11.650Z,1513236071.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:12.039Z,1513236072.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:12.084Z,1513236072.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:12.437Z,1513236072.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:12.452Z,1513236072.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:12.838Z,1513236072.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:12.916Z,1513236072.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:13.238Z,1513236073.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:13.253Z,1513236073.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:13.623Z,1513236073.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:13.649Z,1513236073.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:14.036Z,1513236074.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:14.051Z,1513236074.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:14.424Z,1513236074.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:14.450Z,1513236074.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:14.842Z,1513236074.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:14.941Z,1513236074.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:15.246Z,1513236075.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:15.267Z,1513236075.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:15.645Z,1513236075.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:15.660Z,1513236075.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:16.023Z,1513236076.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:16.048Z,1513236076.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:16.424Z,1513236076.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:16.450Z,1513236076.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:16.823Z,1513236076.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:16.854Z,1513236076.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:17.223Z,1513236077.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:17.239Z,1513236077.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:17.627Z,1513236077.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:17.663Z,1513236077.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:18.041Z,1513236078.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:18.066Z,1513236078.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:18.443Z,1513236078.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:18.491Z,1513236078.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:18.844Z,1513236078.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:18.891Z,1513236078.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:19.248Z,1513236079.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:19.283Z,1513236079.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:19.624Z,1513236079.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:19.659Z,1513236079.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:20.051Z,1513236080.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:20.094Z,1513236080.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:20.449Z,1513236080.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:20.476Z,1513236080.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:20.833Z,1513236080.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:20.930Z,1513236080.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:21.248Z,1513236081.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:21.272Z,1513236081.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:21.645Z,1513236081.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:21.680Z,1513236081.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:22.033Z,1513236082.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:22.089Z,1513236082.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:22.429Z,1513236082.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:22.460Z,1513236082.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:22.848Z,1513236082.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:22.897Z,1513236082.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:23.241Z,1513236083.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:23.289Z,1513236083.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:23.634Z,1513236083.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:23.683Z,1513236083.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:24.044Z,1513236084.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:24.087Z,1513236084.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:24.442Z,1513236084.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:24.474Z,1513236084.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:24.836Z,1513236084.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:24.872Z,1513236084.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:25.254Z,1513236085.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:25.285Z,1513236085.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:25.646Z,1513236085.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:25.694Z,1513236085.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:26.039Z,1513236086.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:26.079Z,1513236086.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:26.423Z,1513236086.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:26.459Z,1513236086.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:26.834Z,1513236086.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:26.952Z,1513236086.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:27.259Z,1513236087.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:27.274Z,1513236087.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:27.635Z,1513236087.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:27.681Z,1513236087.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:28.023Z,1513236088.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:28.040Z,1513236088.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:28.431Z,1513236088.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:28.488Z,1513236088.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:28.844Z,1513236088.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:28.976Z,1513236088.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:29.262Z,1513236089.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:29.287Z,1513236089.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:29.634Z,1513236089.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:29.650Z,1513236089.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:30.053Z,1513236090.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:30.088Z,1513236090.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:30.447Z,1513236090.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:30.463Z,1513236090.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:30.836Z,1513236090.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:30.955Z,1513236090.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:31.229Z,1513236091.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:31.262Z,1513236091.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:31.624Z,1513236091.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:31.737Z,1513236091.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:32.026Z,1513236092.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:32.067Z,1513236092.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:32.434Z,1513236092.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:32.499Z,1513236092.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:32.844Z,1513236092.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:32.922Z,1513236092.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:33.249Z,1513236093.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:33.297Z,1513236093.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:33.668Z,1513236093.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:33.704Z,1513236093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:34.036Z,1513236094.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:34.072Z,1513236094.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:34.426Z,1513236094.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:34.468Z,1513236094.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:34.835Z,1513236094.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:34.859Z,1513236094.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:35.235Z,1513236095.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:35.267Z,1513236095.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:35.634Z,1513236095.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:35.665Z,1513236095.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:36.043Z,1513236096.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:36.063Z,1513236096.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:36.449Z,1513236096.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:36.507Z,1513236096.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:36.850Z,1513236096.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:36.869Z,1513236096.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:37.225Z,1513236097.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:37.256Z,1513236097.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:37.642Z,1513236097.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:37.722Z,1513236097.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:38.025Z,1513236098.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:38.064Z,1513236098.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:38.466Z,1513236098.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:38.495Z,1513236098.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:38.840Z,1513236098.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:38.881Z,1513236098.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:39.244Z,1513236099.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:39.263Z,1513236099.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:39.659Z,1513236099.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:39.702Z,1513236099.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:40.020Z,1513236100.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:40.036Z,1513236100.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:40.425Z,1513236100.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:40.476Z,1513236100.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:40.836Z,1513236100.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:40.946Z,1513236100.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:41.225Z,1513236101.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:41.270Z,1513236101.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:41.627Z,1513236101.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:41.659Z,1513236101.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:42.034Z,1513236102.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:42.063Z,1513236102.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:42.445Z,1513236102.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:42.468Z,1513236102.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:42.834Z,1513236102.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:42.934Z,1513236102.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:43.230Z,1513236103.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:43.252Z,1513236103.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:43.633Z,1513236103.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:43.648Z,1513236103.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:44.038Z,1513236104.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:44.052Z,1513236104.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:44.439Z,1513236104.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:44.454Z,1513236104.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:44.840Z,1513236104.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:44.856Z,1513236104.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:45.245Z,1513236105.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:45.260Z,1513236105.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:45.642Z,1513236105.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:45.657Z,1513236105.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:46.023Z,1513236106.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:46.050Z,1513236106.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:46.420Z,1513236106.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:46.453Z,1513236106.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:46.845Z,1513236106.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:46.859Z,1513236106.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:47.223Z,1513236107.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:47.254Z,1513236107.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:47.620Z,1513236107.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:47.643Z,1513236107.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:48.076Z,1513236108.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:48.115Z,1513236108.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:48.456Z,1513236108.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:48.475Z,1513236108.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:48.835Z,1513236108.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:48.855Z,1513236108.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:49.228Z,1513236109.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:49.248Z,1513236109.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:49.631Z,1513236109.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:49.646Z,1513236109.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:50.034Z,1513236110.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:50.049Z,1513236110.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:50.429Z,1513236110.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:50.448Z,1513236110.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:50.849Z,1513236110.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:50.883Z,1513236110.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:51.248Z,1513236111.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:51.287Z,1513236111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:51.640Z,1513236111.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:51.663Z,1513236111.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:52.035Z,1513236112.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:52.050Z,1513236112.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:52.436Z,1513236112.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:52.451Z,1513236112.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:52.831Z,1513236112.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:52.887Z,1513236112.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:53.237Z,1513236113.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:53.272Z,1513236113.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:53.620Z,1513236113.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:53.652Z,1513236113.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:54.070Z,1513236114.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:54.100Z,1513236114.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:54.447Z,1513236114.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:54.514Z,1513236114.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:54.845Z,1513236114.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:54.926Z,1513236114.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:55.235Z,1513236115.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:55.294Z,1513236115.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:55.631Z,1513236115.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:55.648Z,1513236115.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:56.031Z,1513236116.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:56.046Z,1513236116.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:56.424Z,1513236116.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:56.451Z,1513236116.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:56.843Z,1513236116.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:56.944Z,1513236116.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:57.245Z,1513236117.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:57.260Z,1513236117.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:57.672Z,1513236117.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:57.718Z,1513236117.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:58.021Z,1513236118.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:58.051Z,1513236118.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:58.434Z,1513236118.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:58.453Z,1513236118.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:58.850Z,1513236118.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:58.865Z,1513236118.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:59.227Z,1513236119.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:59.259Z,1513236119.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:21:59.621Z,1513236119.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:21:59.636Z,1513236119.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:00.038Z,1513236120.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:00.065Z,1513236120.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:00.499Z,1513236120.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:00.615Z,1513236120.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:00.840Z,1513236120.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:00.875Z,1513236120.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:01.228Z,1513236121.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:01.258Z,1513236121.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:01.629Z,1513236121.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:01.643Z,1513236121.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:02.030Z,1513236122.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:02.049Z,1513236122.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:02.433Z,1513236122.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:02.456Z,1513236122.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:02.833Z,1513236122.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:02.855Z,1513236122.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:03.232Z,1513236123.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:03.251Z,1513236123.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:03.638Z,1513236123.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:03.682Z,1513236123.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:04.059Z,1513236124.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:04.106Z,1513236124.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:04.438Z,1513236124.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:04.455Z,1513236124.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:04.841Z,1513236124.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:04.857Z,1513236124.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:05.233Z,1513236125.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:05.248Z,1513236125.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:05.636Z,1513236125.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:05.652Z,1513236125.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:09.237Z,1513236129.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:09.252Z,1513236129.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:09.359Z,1513236129.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:09.403Z,1513236129.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:09.742Z,1513236129.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:09.763Z,1513236129.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:10.140Z,1513236130.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:10.156Z,1513236130.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:10.537Z,1513236130.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:10.585Z,1513236130.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:10.950Z,1513236130.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:10.990Z,1513236130.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:11.330Z,1513236131.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:11.360Z,1513236131.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:11.751Z,1513236131.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:11.765Z,1513236131.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:12.156Z,1513236132.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:12.210Z,1513236132.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:12.581Z,1513236132.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:12.612Z,1513236132.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:12.935Z,1513236132.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:12.956Z,1513236132.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:13.335Z,1513236133.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:13.351Z,1513236133.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:13.734Z,1513236133.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:13.748Z,1513236133.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:14.139Z,1513236134.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:14.155Z,1513236134.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:14.575Z,1513236134.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:14.615Z,1513236134.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:14.955Z,1513236134.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:14.982Z,1513236134.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:15.350Z,1513236135.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:15.368Z,1513236135.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:15.750Z,1513236135.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:15.842Z,1513236135.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:16.127Z,1513236136.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:16.151Z,1513236136.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:16.581Z,1513236136.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:16.640Z,1513236136.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:16.931Z,1513236136.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:16.961Z,1513236136.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:17.339Z,1513236137.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:17.383Z,1513236137.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:17.749Z,1513236137.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:17.780Z,1513236137.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:18.145Z,1513236138.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:18.168Z,1513236138.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:18.600Z,1513236138.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:18.638Z,1513236138.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:18.933Z,1513236138.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:18.948Z,1513236138.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:19.344Z,1513236139.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:19.368Z,1513236139.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:19.739Z,1513236139.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:19.753Z,1513236139.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:20.133Z,1513236140.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:20.153Z,1513236140.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:20.536Z,1513236140.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:20.551Z,1513236140.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:20.955Z,1513236140.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:20.970Z,1513236140.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:21.351Z,1513236141.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:21.371Z,1513236141.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:21.750Z,1513236141.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:21.765Z,1513236141.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:22.126Z,1513236142.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:22.159Z,1513236142.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:22.521Z,1513236142.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:22.543Z,1513236142.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:23.079Z,1513236143.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:23.119Z,1513236143.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:23.119Z,1513236143.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137
2017-12-14T07:22:23.119Z,1513236143.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:22:23.125Z,1513236143.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:23.125Z,1513236143.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 137
2017-12-14T07:22:23.125Z,1513236143.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:22:23.127Z,1513236143.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:23.127Z,1513236143.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2017-12-14T07:22:23.127Z,1513236143.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:22:23.164Z,1513236143.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:22:23.164Z,1513236143.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:22:23.164Z,1513236143.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:22:23.349Z,1513236143.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:23.375Z,1513236143.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:22:23.375Z,1513236143.375 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137
2017-12-14T07:22:23.376Z,1513236143.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:22:23.376Z,1513236143.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 137
2017-12-14T07:22:23.376Z,1513236143.376 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:22:23.376Z,1513236143.376 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2017-12-14T07:22:23.746Z,1513236143.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:23.773Z,1513236143.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:22:23.774Z,1513236143.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:22:23.774Z,1513236143.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:22:23.775Z,1513236143.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:22:23.775Z,1513236143.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:22:23.775Z,1513236143.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:22:23.776Z,1513236143.776 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:22:23.776Z,1513236143.776 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:22:23.776Z,1513236143.776 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:22:24.142Z,1513236144.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:24.174Z,1513236144.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:24.546Z,1513236144.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:24.572Z,1513236144.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:24.960Z,1513236144.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:25.023Z,1513236145.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:25.331Z,1513236145.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:25.346Z,1513236145.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:25.731Z,1513236145.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:25.787Z,1513236145.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:26.133Z,1513236146.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:26.148Z,1513236146.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:26.591Z,1513236146.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:26.633Z,1513236146.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:26.946Z,1513236146.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:26.972Z,1513236146.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:27.363Z,1513236147.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:27.378Z,1513236147.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:27.744Z,1513236147.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:27.771Z,1513236147.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:28.135Z,1513236148.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:28.175Z,1513236148.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:28.591Z,1513236148.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:28.660Z,1513236148.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:28.935Z,1513236148.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:28.950Z,1513236148.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:29.338Z,1513236149.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:29.415Z,1513236149.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:29.746Z,1513236149.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:29.760Z,1513236149.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:30.146Z,1513236150.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:30.163Z,1513236150.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:30.586Z,1513236150.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:30.623Z,1513236150.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:30.935Z,1513236150.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:30.956Z,1513236150.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:31.336Z,1513236151.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:31.350Z,1513236151.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:31.733Z,1513236151.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:31.748Z,1513236151.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:32.137Z,1513236152.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:32.151Z,1513236152.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:32.572Z,1513236152.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:32.604Z,1513236152.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:32.966Z,1513236152.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:32.982Z,1513236152.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:33.340Z,1513236153.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:33.365Z,1513236153.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:33.749Z,1513236153.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:33.776Z,1513236153.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:34.128Z,1513236154.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:34.159Z,1513236154.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:34.530Z,1513236154.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:34.601Z,1513236154.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:34.935Z,1513236154.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:34.953Z,1513236154.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:35.338Z,1513236155.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:35.353Z,1513236155.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:35.745Z,1513236155.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:35.760Z,1513236155.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:36.153Z,1513236156.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:36.168Z,1513236156.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:36.551Z,1513236156.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:36.571Z,1513236156.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:36.949Z,1513236156.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:36.979Z,1513236156.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:37.331Z,1513236157.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:37.364Z,1513236157.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:37.731Z,1513236157.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:37.819Z,1513236157.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:38.127Z,1513236158.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:38.142Z,1513236158.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:38.534Z,1513236158.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:38.583Z,1513236158.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:38.983Z,1513236158.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:39.027Z,1513236159.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:39.350Z,1513236159.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:39.420Z,1513236159.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:39.745Z,1513236159.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:39.775Z,1513236159.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:40.134Z,1513236160.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:40.155Z,1513236160.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:40.569Z,1513236160.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:40.634Z,1513236160.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:40.941Z,1513236160.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:40.955Z,1513236160.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:41.328Z,1513236161.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:41.359Z,1513236161.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:41.745Z,1513236161.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:41.767Z,1513236161.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:42.145Z,1513236162.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:42.200Z,1513236162.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:42.579Z,1513236162.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:42.614Z,1513236162.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:42.927Z,1513236162.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:42.964Z,1513236162.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:43.327Z,1513236163.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:43.364Z,1513236163.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:43.731Z,1513236163.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:43.763Z,1513236163.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:44.131Z,1513236164.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:44.166Z,1513236164.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:44.568Z,1513236164.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:44.613Z,1513236164.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:44.959Z,1513236164.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:44.987Z,1513236164.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:45.388Z,1513236165.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:45.425Z,1513236165.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:45.749Z,1513236165.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:45.773Z,1513236165.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:46.136Z,1513236166.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:46.150Z,1513236166.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:46.584Z,1513236166.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:46.627Z,1513236166.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:46.928Z,1513236166.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:46.942Z,1513236166.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:47.335Z,1513236167.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:47.371Z,1513236167.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:47.741Z,1513236167.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:47.811Z,1513236167.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:48.141Z,1513236168.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:48.175Z,1513236168.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:48.612Z,1513236168.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:48.684Z,1513236168.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:48.936Z,1513236168.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:48.971Z,1513236168.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:49.333Z,1513236169.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:49.348Z,1513236169.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:49.734Z,1513236169.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:49.748Z,1513236169.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:50.134Z,1513236170.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:50.148Z,1513236170.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:50.535Z,1513236170.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:50.550Z,1513236170.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:50.998Z,1513236170.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:51.030Z,1513236171.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:51.349Z,1513236171.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:51.383Z,1513236171.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:51.741Z,1513236171.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:51.772Z,1513236171.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:52.134Z,1513236172.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:52.149Z,1513236172.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:52.539Z,1513236172.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:52.559Z,1513236172.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:52.960Z,1513236172.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:52.990Z,1513236172.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:53.335Z,1513236173.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:53.351Z,1513236173.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:53.749Z,1513236173.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:53.785Z,1513236173.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:54.145Z,1513236174.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:54.159Z,1513236174.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:54.588Z,1513236174.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:54.627Z,1513236174.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:54.951Z,1513236174.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:54.995Z,1513236174.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:55.340Z,1513236175.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:55.371Z,1513236175.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:55.728Z,1513236175.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:55.749Z,1513236175.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:56.133Z,1513236176.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:56.149Z,1513236176.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:56.588Z,1513236176.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:56.624Z,1513236176.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:56.946Z,1513236176.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:56.989Z,1513236176.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:57.350Z,1513236177.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:57.378Z,1513236177.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:57.750Z,1513236177.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:57.776Z,1513236177.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:58.172Z,1513236178.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:58.221Z,1513236178.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:58.599Z,1513236178.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:58.632Z,1513236178.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:58.931Z,1513236178.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:58.965Z,1513236178.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:59.335Z,1513236179.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:59.395Z,1513236179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:22:59.746Z,1513236179.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:22:59.775Z,1513236179.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:00.146Z,1513236180.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:00.195Z,1513236180.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:00.590Z,1513236180.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:00.625Z,1513236180.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:00.932Z,1513236180.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:00.951Z,1513236180.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:01.362Z,1513236181.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:01.442Z,1513236181.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:01.736Z,1513236181.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:01.751Z,1513236181.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:02.138Z,1513236182.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:02.194Z,1513236182.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:02.535Z,1513236182.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:02.551Z,1513236182.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:02.944Z,1513236182.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:02.963Z,1513236182.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:03.348Z,1513236183.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:03.363Z,1513236183.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:03.747Z,1513236183.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:03.761Z,1513236183.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:04.129Z,1513236184.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:04.160Z,1513236184.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:04.564Z,1513236184.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:04.603Z,1513236184.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:04.954Z,1513236184.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:04.985Z,1513236184.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:05.331Z,1513236185.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:05.363Z,1513236185.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:05.738Z,1513236185.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:05.771Z,1513236185.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:09.273Z,1513236189.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:09.311Z,1513236189.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:09.408Z,1513236189.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:09.439Z,1513236189.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:09.769Z,1513236189.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:09.784Z,1513236189.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:10.165Z,1513236190.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:10.214Z,1513236190.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:10.616Z,1513236190.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:10.640Z,1513236190.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:10.974Z,1513236190.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:11.011Z,1513236191.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:11.378Z,1513236191.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:11.399Z,1513236191.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:11.777Z,1513236191.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:11.799Z,1513236191.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:12.171Z,1513236192.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:12.186Z,1513236192.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:12.597Z,1513236192.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:12.640Z,1513236192.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:12.970Z,1513236192.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:12.986Z,1513236192.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:13.362Z,1513236193.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:13.392Z,1513236193.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:13.779Z,1513236193.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:13.794Z,1513236193.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:14.176Z,1513236194.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:14.215Z,1513236194.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:14.621Z,1513236194.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:14.636Z,1513236194.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:14.970Z,1513236194.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:14.986Z,1513236194.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:15.364Z,1513236195.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:15.388Z,1513236195.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:15.768Z,1513236195.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:15.783Z,1513236195.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:16.170Z,1513236196.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:16.185Z,1513236196.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:16.584Z,1513236196.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:16.657Z,1513236196.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:16.974Z,1513236196.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:16.995Z,1513236196.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:17.421Z,1513236197.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:17.475Z,1513236197.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:17.776Z,1513236197.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:17.800Z,1513236197.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:18.171Z,1513236198.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:18.186Z,1513236198.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:18.568Z,1513236198.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:18.583Z,1513236198.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:18.988Z,1513236198.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:19.003Z,1513236199.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:19.374Z,1513236199.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:19.395Z,1513236199.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:19.783Z,1513236199.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:19.846Z,1513236199.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:20.181Z,1513236200.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:20.203Z,1513236200.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:20.604Z,1513236200.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:20.647Z,1513236200.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:20.978Z,1513236200.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:20.996Z,1513236200.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:21.372Z,1513236201.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:21.381Z,1513236201.381 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:23:21.382Z,1513236201.382 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:23:21.382Z,1513236201.382 [BPC1](ERROR): Data Fault
2017-12-14T07:23:21.395Z,1513236201.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:21.433Z,1513236201.433 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:23:21.772Z,1513236201.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:21.788Z,1513236201.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:22.175Z,1513236202.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:22.191Z,1513236202.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:22.602Z,1513236202.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:22.641Z,1513236202.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:22.680Z,1513236202.680 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:23:22.680Z,1513236202.680 [BPC1] No Fault, FailCount= 1
2017-12-14T07:23:22.990Z,1513236202.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:23.067Z,1513236203.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:23.386Z,1513236203.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:23.400Z,1513236203.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:23.791Z,1513236203.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:23.834Z,1513236203.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:24.159Z,1513236204.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:24.199Z,1513236204.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:24.603Z,1513236204.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:24.649Z,1513236204.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:24.975Z,1513236204.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:25.011Z,1513236205.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:25.370Z,1513236205.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:25.385Z,1513236205.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:25.782Z,1513236205.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:25.796Z,1513236205.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:26.174Z,1513236206.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:26.189Z,1513236206.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:26.610Z,1513236206.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:26.634Z,1513236206.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:26.990Z,1513236206.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:27.030Z,1513236207.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:27.372Z,1513236207.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:27.387Z,1513236207.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:27.762Z,1513236207.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:27.789Z,1513236207.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:28.175Z,1513236208.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:28.189Z,1513236208.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:28.599Z,1513236208.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:28.646Z,1513236208.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:28.984Z,1513236208.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:29.008Z,1513236209.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:29.390Z,1513236209.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:29.405Z,1513236209.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:29.781Z,1513236209.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:29.796Z,1513236209.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:30.205Z,1513236210.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:30.244Z,1513236210.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:30.558Z,1513236210.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:30.668Z,1513236210.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:30.968Z,1513236210.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:31.003Z,1513236211.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:31.366Z,1513236211.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:31.428Z,1513236211.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:31.777Z,1513236211.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:31.811Z,1513236211.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:32.178Z,1513236212.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:32.207Z,1513236212.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:32.579Z,1513236212.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:32.609Z,1513236212.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:32.969Z,1513236212.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:32.984Z,1513236212.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:33.399Z,1513236213.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:33.428Z,1513236213.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:33.770Z,1513236213.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:33.785Z,1513236213.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:34.171Z,1513236214.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:34.186Z,1513236214.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:34.562Z,1513236214.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:34.582Z,1513236214.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:34.974Z,1513236214.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:34.990Z,1513236214.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:35.374Z,1513236215.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:35.390Z,1513236215.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:35.769Z,1513236215.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:35.793Z,1513236215.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:36.173Z,1513236216.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:36.188Z,1513236216.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:36.625Z,1513236216.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:36.639Z,1513236216.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:36.969Z,1513236216.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:37.012Z,1513236217.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:37.371Z,1513236217.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:37.386Z,1513236217.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:37.782Z,1513236217.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:37.797Z,1513236217.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:38.179Z,1513236218.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:38.203Z,1513236218.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:38.622Z,1513236218.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:38.641Z,1513236218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:38.966Z,1513236218.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:38.999Z,1513236218.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:39.359Z,1513236219.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:39.387Z,1513236219.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:39.759Z,1513236219.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:39.851Z,1513236219.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:40.171Z,1513236220.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:40.187Z,1513236220.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:40.604Z,1513236220.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:40.646Z,1513236220.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:40.980Z,1513236220.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:41.008Z,1513236221.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:41.387Z,1513236221.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:41.407Z,1513236221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:41.777Z,1513236221.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:41.799Z,1513236221.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:42.159Z,1513236222.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:42.192Z,1513236222.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:42.601Z,1513236222.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:42.650Z,1513236222.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:42.989Z,1513236222.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:43.044Z,1513236223.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:43.371Z,1513236223.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:43.430Z,1513236223.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:43.773Z,1513236223.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:43.820Z,1513236223.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:44.189Z,1513236224.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:44.204Z,1513236224.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:44.620Z,1513236224.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:44.662Z,1513236224.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:44.972Z,1513236224.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:45.020Z,1513236225.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:45.367Z,1513236225.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:45.384Z,1513236225.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:45.764Z,1513236225.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:45.823Z,1513236225.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:46.212Z,1513236226.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:46.260Z,1513236226.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:46.565Z,1513236226.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:46.580Z,1513236226.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:46.986Z,1513236226.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:47.009Z,1513236227.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:47.377Z,1513236227.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:47.392Z,1513236227.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:47.767Z,1513236227.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:47.781Z,1513236227.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:48.166Z,1513236228.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:48.180Z,1513236228.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:48.568Z,1513236228.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:48.582Z,1513236228.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:48.972Z,1513236228.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:48.987Z,1513236228.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:49.378Z,1513236229.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:49.410Z,1513236229.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:49.778Z,1513236229.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:49.792Z,1513236229.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:50.177Z,1513236230.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:50.193Z,1513236230.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:50.619Z,1513236230.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:50.644Z,1513236230.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:50.975Z,1513236230.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:50.998Z,1513236230.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:51.375Z,1513236231.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:51.425Z,1513236231.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:51.761Z,1513236231.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:51.788Z,1513236231.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:52.173Z,1513236232.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:52.189Z,1513236232.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:52.609Z,1513236232.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:52.670Z,1513236232.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:53.005Z,1513236233.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:53.020Z,1513236233.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:53.381Z,1513236233.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:53.411Z,1513236233.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:53.766Z,1513236233.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:53.803Z,1513236233.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:54.167Z,1513236234.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:54.219Z,1513236234.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:54.618Z,1513236234.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:54.659Z,1513236234.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:54.966Z,1513236234.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:54.981Z,1513236234.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:55.364Z,1513236235.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:55.392Z,1513236235.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:55.782Z,1513236235.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:55.844Z,1513236235.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:56.174Z,1513236236.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:56.189Z,1513236236.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:56.615Z,1513236236.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:56.638Z,1513236236.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:56.976Z,1513236236.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:56.992Z,1513236236.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:57.371Z,1513236237.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:57.386Z,1513236237.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:57.767Z,1513236237.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:57.782Z,1513236237.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:58.174Z,1513236238.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:58.188Z,1513236238.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:58.571Z,1513236238.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:58.658Z,1513236238.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:58.998Z,1513236238.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:59.028Z,1513236239.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:59.381Z,1513236239.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:59.403Z,1513236239.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:23:59.770Z,1513236239.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:23:59.801Z,1513236239.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:00.159Z,1513236240.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:00.187Z,1513236240.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:00.559Z,1513236240.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:00.586Z,1513236240.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:00.977Z,1513236240.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:00.992Z,1513236240.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:01.359Z,1513236241.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:01.391Z,1513236241.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:01.781Z,1513236241.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:01.803Z,1513236241.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:02.204Z,1513236242.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:02.235Z,1513236242.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:02.579Z,1513236242.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:02.599Z,1513236242.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:02.974Z,1513236242.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:03.012Z,1513236243.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:03.381Z,1513236243.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:03.396Z,1513236243.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:03.759Z,1513236243.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:03.787Z,1513236243.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:04.160Z,1513236244.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:04.190Z,1513236244.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:04.603Z,1513236244.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:04.638Z,1513236244.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:04.982Z,1513236244.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:05.011Z,1513236245.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:05.405Z,1513236245.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:05.436Z,1513236245.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:05.770Z,1513236245.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:05.842Z,1513236245.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:09.296Z,1513236249.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:09.352Z,1513236249.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:09.481Z,1513236249.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:09.559Z,1513236249.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:09.835Z,1513236249.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:09.855Z,1513236249.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:10.246Z,1513236250.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:10.292Z,1513236250.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:10.632Z,1513236250.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:10.647Z,1513236250.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:11.022Z,1513236251.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:11.069Z,1513236251.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:11.429Z,1513236251.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:11.443Z,1513236251.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:11.824Z,1513236251.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:11.860Z,1513236251.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:12.225Z,1513236252.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:12.248Z,1513236252.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:12.671Z,1513236252.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:12.695Z,1513236252.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:13.040Z,1513236253.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:13.055Z,1513236253.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:13.442Z,1513236253.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:13.456Z,1513236253.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:13.839Z,1513236253.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:13.865Z,1513236253.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:14.219Z,1513236254.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:14.245Z,1513236254.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:14.619Z,1513236254.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:14.651Z,1513236254.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:15.059Z,1513236255.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:15.105Z,1513236255.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:15.413Z,1513236255.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:15.432Z,1513236255.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:15.842Z,1513236255.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:15.864Z,1513236255.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:16.237Z,1513236256.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:16.267Z,1513236256.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:16.631Z,1513236256.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:16.646Z,1513236256.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:17.028Z,1513236257.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:17.044Z,1513236257.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:17.427Z,1513236257.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:17.441Z,1513236257.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:17.820Z,1513236257.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:17.848Z,1513236257.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:18.260Z,1513236258.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:18.283Z,1513236258.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:18.630Z,1513236258.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:18.645Z,1513236258.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:19.033Z,1513236259.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:19.055Z,1513236259.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:19.434Z,1513236259.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:19.483Z,1513236259.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:19.832Z,1513236259.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:19.847Z,1513236259.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:20.227Z,1513236260.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:20.242Z,1513236260.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:20.629Z,1513236260.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:20.644Z,1513236260.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:21.024Z,1513236261.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:21.051Z,1513236261.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:21.454Z,1513236261.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:21.482Z,1513236261.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:21.837Z,1513236261.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:21.852Z,1513236261.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:22.242Z,1513236262.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:22.256Z,1513236262.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:22.635Z,1513236262.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:22.655Z,1513236262.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:23.026Z,1513236263.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:23.056Z,1513236263.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:23.424Z,1513236263.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:23.451Z,1513236263.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:23.818Z,1513236263.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:23.851Z,1513236263.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:24.224Z,1513236264.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:24.255Z,1513236264.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:24.667Z,1513236264.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:24.708Z,1513236264.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:25.031Z,1513236265.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:25.063Z,1513236265.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:25.448Z,1513236265.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:25.467Z,1513236265.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:25.831Z,1513236265.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:25.863Z,1513236265.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:26.219Z,1513236266.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:26.259Z,1513236266.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:26.667Z,1513236266.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:26.708Z,1513236266.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:27.022Z,1513236267.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:27.046Z,1513236267.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:27.423Z,1513236267.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:27.460Z,1513236267.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:27.891Z,1513236267.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:27.938Z,1513236267.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:28.237Z,1513236268.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:28.268Z,1513236268.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:28.635Z,1513236268.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:28.658Z,1513236268.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:29.027Z,1513236269.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:29.042Z,1513236269.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:29.429Z,1513236269.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:29.443Z,1513236269.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:29.824Z,1513236269.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:29.839Z,1513236269.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:30.229Z,1513236270.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:30.243Z,1513236270.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:30.625Z,1513236270.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:30.639Z,1513236270.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:31.049Z,1513236271.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:31.131Z,1513236271.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:31.440Z,1513236271.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:31.513Z,1513236271.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:31.841Z,1513236271.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:31.856Z,1513236271.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:32.230Z,1513236272.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:32.290Z,1513236272.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:32.632Z,1513236272.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:32.646Z,1513236272.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:33.020Z,1513236273.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:33.076Z,1513236273.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:33.419Z,1513236273.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:33.451Z,1513236273.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:33.841Z,1513236273.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:33.855Z,1513236273.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:34.245Z,1513236274.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:34.296Z,1513236274.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:34.639Z,1513236274.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:34.659Z,1513236274.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:35.031Z,1513236275.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:35.050Z,1513236275.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:35.419Z,1513236275.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:35.445Z,1513236275.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:35.816Z,1513236275.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:35.847Z,1513236275.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:36.219Z,1513236276.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:36.243Z,1513236276.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:36.638Z,1513236276.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:36.656Z,1513236276.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:37.042Z,1513236277.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:37.057Z,1513236277.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:37.456Z,1513236277.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:37.492Z,1513236277.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:37.842Z,1513236277.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:37.871Z,1513236277.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:38.219Z,1513236278.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:38.234Z,1513236278.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:38.631Z,1513236278.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:38.645Z,1513236278.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:39.024Z,1513236279.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:39.038Z,1513236279.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:39.431Z,1513236279.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:39.467Z,1513236279.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:39.838Z,1513236279.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:39.852Z,1513236279.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:40.241Z,1513236280.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:40.274Z,1513236280.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:40.687Z,1513236280.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:40.738Z,1513236280.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:41.024Z,1513236281.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:41.044Z,1513236281.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:41.429Z,1513236281.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:41.486Z,1513236281.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:41.828Z,1513236281.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:41.844Z,1513236281.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:42.228Z,1513236282.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:42.242Z,1513236282.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:42.631Z,1513236282.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:42.647Z,1513236282.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:43.034Z,1513236283.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:43.056Z,1513236283.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:43.441Z,1513236283.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:43.456Z,1513236283.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:43.842Z,1513236283.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:43.898Z,1513236283.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:44.232Z,1513236284.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:44.247Z,1513236284.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:44.618Z,1513236284.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:44.651Z,1513236284.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:45.019Z,1513236285.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:45.047Z,1513236285.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:45.419Z,1513236285.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:45.450Z,1513236285.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:45.837Z,1513236285.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:45.852Z,1513236285.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:46.243Z,1513236286.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:46.258Z,1513236286.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:46.638Z,1513236286.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:46.653Z,1513236286.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:47.031Z,1513236287.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:47.074Z,1513236287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:47.450Z,1513236287.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:47.471Z,1513236287.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:47.825Z,1513236287.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:47.852Z,1513236287.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:48.223Z,1513236288.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:48.237Z,1513236288.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:48.625Z,1513236288.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:48.640Z,1513236288.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:49.038Z,1513236289.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:49.061Z,1513236289.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:49.442Z,1513236289.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:49.471Z,1513236289.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:49.838Z,1513236289.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:49.863Z,1513236289.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:50.234Z,1513236290.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:50.279Z,1513236290.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:50.628Z,1513236290.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:50.647Z,1513236290.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:51.030Z,1513236291.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:51.045Z,1513236291.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:51.426Z,1513236291.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:51.449Z,1513236291.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:51.836Z,1513236291.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:51.859Z,1513236291.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:52.237Z,1513236292.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:52.252Z,1513236292.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:52.636Z,1513236292.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:52.644Z,1513236292.644 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T07:24:52.644Z,1513236292.644 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:24:52.644Z,1513236292.644 [BPC1](ERROR): Data Fault
2017-12-14T07:24:52.675Z,1513236292.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:52.705Z,1513236292.705 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:24:53.022Z,1513236293.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:53.054Z,1513236293.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:53.456Z,1513236293.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:53.491Z,1513236293.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:53.818Z,1513236293.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:53.854Z,1513236293.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:53.880Z,1513236293.880 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:24:53.880Z,1513236293.880 [BPC1] No Fault, FailCount= 1
2017-12-14T07:24:54.224Z,1513236294.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:54.295Z,1513236294.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:54.653Z,1513236294.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:54.669Z,1513236294.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:55.030Z,1513236295.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:55.064Z,1513236295.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:55.441Z,1513236295.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:55.463Z,1513236295.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:55.829Z,1513236295.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:55.859Z,1513236295.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:56.227Z,1513236296.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:56.258Z,1513236296.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:56.626Z,1513236296.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:56.700Z,1513236296.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:57.019Z,1513236297.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:57.043Z,1513236297.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:57.427Z,1513236297.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:57.442Z,1513236297.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:57.837Z,1513236297.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:57.852Z,1513236297.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:58.236Z,1513236298.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:58.250Z,1513236298.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:58.637Z,1513236298.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:58.651Z,1513236298.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:59.026Z,1513236299.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:59.040Z,1513236299.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:59.428Z,1513236299.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:59.442Z,1513236299.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:24:59.845Z,1513236299.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:24:59.884Z,1513236299.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:00.230Z,1513236300.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:00.251Z,1513236300.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:00.630Z,1513236300.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:00.644Z,1513236300.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:01.042Z,1513236301.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:01.056Z,1513236301.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:01.440Z,1513236301.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:01.463Z,1513236301.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:01.838Z,1513236301.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:01.853Z,1513236301.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:02.230Z,1513236302.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:02.245Z,1513236302.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:02.629Z,1513236302.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:02.668Z,1513236302.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:03.053Z,1513236303.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:03.088Z,1513236303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:03.419Z,1513236303.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:03.447Z,1513236303.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:03.834Z,1513236303.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:03.856Z,1513236303.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:04.246Z,1513236304.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:04.260Z,1513236304.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:04.639Z,1513236304.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:04.663Z,1513236304.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:05.019Z,1513236305.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:05.048Z,1513236305.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:05.419Z,1513236305.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:05.447Z,1513236305.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:05.823Z,1513236305.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:05.857Z,1513236305.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:09.311Z,1513236309.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:09.342Z,1513236309.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:09.420Z,1513236309.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:09.468Z,1513236309.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:09.825Z,1513236309.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:09.855Z,1513236309.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:10.226Z,1513236310.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:10.255Z,1513236310.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:10.622Z,1513236310.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:10.648Z,1513236310.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:11.013Z,1513236311.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:11.048Z,1513236311.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:11.411Z,1513236311.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:11.426Z,1513236311.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:11.811Z,1513236311.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:11.847Z,1513236311.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:12.212Z,1513236312.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:12.227Z,1513236312.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:12.611Z,1513236312.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:12.671Z,1513236312.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:13.026Z,1513236313.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:13.051Z,1513236313.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:13.421Z,1513236313.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:13.452Z,1513236313.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:13.817Z,1513236313.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:13.848Z,1513236313.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:14.213Z,1513236314.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:14.251Z,1513236314.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:14.618Z,1513236314.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:14.697Z,1513236314.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:15.010Z,1513236315.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:15.042Z,1513236315.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:15.410Z,1513236315.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:15.470Z,1513236315.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:15.834Z,1513236315.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:15.860Z,1513236315.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:16.225Z,1513236316.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:16.275Z,1513236316.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:16.627Z,1513236316.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:16.647Z,1513236316.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:17.004Z,1513236317.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:17.035Z,1513236317.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:17.406Z,1513236317.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:17.439Z,1513236317.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:17.807Z,1513236317.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:17.840Z,1513236317.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:18.211Z,1513236318.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:18.236Z,1513236318.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:18.602Z,1513236318.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:18.644Z,1513236318.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:19.074Z,1513236319.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:19.104Z,1513236319.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:19.417Z,1513236319.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:19.451Z,1513236319.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:19.814Z,1513236319.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:19.847Z,1513236319.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:20.211Z,1513236320.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:20.242Z,1513236320.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:20.610Z,1513236320.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:20.646Z,1513236320.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:21.012Z,1513236321.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:21.042Z,1513236321.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:21.411Z,1513236321.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:21.441Z,1513236321.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:21.817Z,1513236321.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:21.843Z,1513236321.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:22.238Z,1513236322.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:22.287Z,1513236322.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:22.656Z,1513236322.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:22.695Z,1513236322.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.011Z,1513236323.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:23.046Z,1513236323.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.409Z,1513236323.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:23.424Z,1513236323.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.811Z,1513236323.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:23.826Z,1513236323.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.826Z,1513236323.826 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138
2017-12-14T07:25:23.826Z,1513236323.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:25:23.828Z,1513236323.828 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.828Z,1513236323.828 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 138
2017-12-14T07:25:23.828Z,1513236323.828 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:25:23.846Z,1513236323.846 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:23.846Z,1513236323.846 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2017-12-14T07:25:23.846Z,1513236323.846 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:25:23.867Z,1513236323.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:25:23.867Z,1513236323.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:25:23.868Z,1513236323.868 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:25:24.209Z,1513236324.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:24.261Z,1513236324.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:25:24.262Z,1513236324.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138
2017-12-14T07:25:24.262Z,1513236324.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:25:24.262Z,1513236324.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 138
2017-12-14T07:25:24.263Z,1513236324.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:25:24.263Z,1513236324.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2017-12-14T07:25:24.609Z,1513236324.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:24.655Z,1513236324.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:25:24.656Z,1513236324.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:25:24.656Z,1513236324.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:25:24.657Z,1513236324.657 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:25:24.657Z,1513236324.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:25:24.657Z,1513236324.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:25:24.658Z,1513236324.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:25:24.658Z,1513236324.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:25:24.658Z,1513236324.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:25:25.016Z,1513236325.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:25.047Z,1513236325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:25.443Z,1513236325.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:25.479Z,1513236325.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:25.822Z,1513236325.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:25.843Z,1513236325.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:26.203Z,1513236326.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:26.235Z,1513236326.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:26.619Z,1513236326.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:26.634Z,1513236326.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:27.013Z,1513236327.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:27.044Z,1513236327.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:27.414Z,1513236327.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:27.435Z,1513236327.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:27.818Z,1513236327.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:27.841Z,1513236327.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:28.226Z,1513236328.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:28.240Z,1513236328.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:28.656Z,1513236328.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:28.687Z,1513236328.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:29.004Z,1513236329.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:29.035Z,1513236329.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:29.404Z,1513236329.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:29.439Z,1513236329.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:29.796Z,1513236329.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:29.812Z,1513236329.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:30.208Z,1513236330.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:30.239Z,1513236330.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:30.604Z,1513236330.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:30.649Z,1513236330.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:31.026Z,1513236331.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:31.046Z,1513236331.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:31.435Z,1513236331.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:31.480Z,1513236331.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:31.823Z,1513236331.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:31.862Z,1513236331.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:32.212Z,1513236332.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:32.236Z,1513236332.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:32.620Z,1513236332.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:32.659Z,1513236332.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:33.010Z,1513236333.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:33.029Z,1513236333.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:33.406Z,1513236333.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:33.429Z,1513236333.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:33.820Z,1513236333.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:33.835Z,1513236333.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:34.222Z,1513236334.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:34.236Z,1513236334.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:34.622Z,1513236334.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:34.637Z,1513236334.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:35.017Z,1513236335.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:35.067Z,1513236335.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:35.413Z,1513236335.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:35.435Z,1513236335.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:35.816Z,1513236335.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:35.839Z,1513236335.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:36.218Z,1513236336.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:36.233Z,1513236336.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:36.644Z,1513236336.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:36.741Z,1513236336.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:37.018Z,1513236337.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:37.055Z,1513236337.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:37.421Z,1513236337.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:37.494Z,1513236337.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:37.821Z,1513236337.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:37.847Z,1513236337.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:38.235Z,1513236338.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:38.295Z,1513236338.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:38.611Z,1513236338.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:38.643Z,1513236338.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:39.010Z,1513236339.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:39.027Z,1513236339.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:39.411Z,1513236339.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:39.451Z,1513236339.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:39.826Z,1513236339.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:39.856Z,1513236339.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:40.222Z,1513236340.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:40.257Z,1513236340.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:40.610Z,1513236340.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:40.627Z,1513236340.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:41.013Z,1513236341.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:41.029Z,1513236341.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:41.434Z,1513236341.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:41.460Z,1513236341.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:41.803Z,1513236341.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:41.834Z,1513236341.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:42.203Z,1513236342.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:42.218Z,1513236342.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:42.608Z,1513236342.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:42.655Z,1513236342.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:43.017Z,1513236343.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:43.045Z,1513236343.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:43.432Z,1513236343.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:43.455Z,1513236343.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:43.814Z,1513236343.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:43.849Z,1513236343.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:44.200Z,1513236344.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:44.215Z,1513236344.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:44.650Z,1513236344.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:44.694Z,1513236344.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:45.014Z,1513236345.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:45.041Z,1513236345.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:45.407Z,1513236345.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:45.427Z,1513236345.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:45.821Z,1513236345.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:45.836Z,1513236345.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:46.225Z,1513236346.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:46.239Z,1513236346.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:46.616Z,1513236346.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:46.659Z,1513236346.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:47.009Z,1513236347.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:47.024Z,1513236347.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:47.412Z,1513236347.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:47.426Z,1513236347.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:47.827Z,1513236347.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:47.859Z,1513236347.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:48.224Z,1513236348.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:48.240Z,1513236348.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:48.604Z,1513236348.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:48.636Z,1513236348.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:49.026Z,1513236349.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:49.041Z,1513236349.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:49.425Z,1513236349.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:49.441Z,1513236349.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:49.821Z,1513236349.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:49.836Z,1513236349.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:50.202Z,1513236350.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:50.235Z,1513236350.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:50.636Z,1513236350.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:50.683Z,1513236350.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:51.045Z,1513236351.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:51.068Z,1513236351.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:51.408Z,1513236351.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:51.423Z,1513236351.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:51.821Z,1513236351.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:51.847Z,1513236351.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:52.236Z,1513236352.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:52.251Z,1513236352.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:52.618Z,1513236352.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:52.648Z,1513236352.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:53.003Z,1513236353.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:53.023Z,1513236353.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:53.403Z,1513236353.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:53.424Z,1513236353.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:53.808Z,1513236353.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:53.823Z,1513236353.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:54.217Z,1513236354.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:54.310Z,1513236354.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:54.618Z,1513236354.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:54.639Z,1513236354.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:55.014Z,1513236355.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:55.029Z,1513236355.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:55.425Z,1513236355.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:55.440Z,1513236355.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:55.818Z,1513236355.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:55.839Z,1513236355.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:56.214Z,1513236356.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:56.230Z,1513236356.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:56.624Z,1513236356.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:56.642Z,1513236356.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:57.018Z,1513236357.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:57.033Z,1513236357.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:57.416Z,1513236357.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:57.448Z,1513236357.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:57.822Z,1513236357.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:57.843Z,1513236357.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:58.228Z,1513236358.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:58.244Z,1513236358.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:58.623Z,1513236358.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:58.758Z,1513236358.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:59.006Z,1513236359.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:59.043Z,1513236359.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:59.407Z,1513236359.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:59.459Z,1513236359.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:25:59.796Z,1513236359.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:25:59.812Z,1513236359.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:00.203Z,1513236360.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:00.247Z,1513236360.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:00.634Z,1513236360.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:00.659Z,1513236360.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:01.013Z,1513236361.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:01.040Z,1513236361.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:01.483Z,1513236361.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:01.506Z,1513236361.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:01.813Z,1513236361.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:01.851Z,1513236361.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:02.212Z,1513236362.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:02.243Z,1513236362.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:02.617Z,1513236362.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:02.651Z,1513236362.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:03.003Z,1513236363.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:03.018Z,1513236363.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:03.407Z,1513236363.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:03.423Z,1513236363.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:03.826Z,1513236363.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:03.855Z,1513236363.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:04.222Z,1513236364.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:04.245Z,1513236364.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:04.633Z,1513236364.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:04.664Z,1513236364.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:05.003Z,1513236365.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:05.038Z,1513236365.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:05.406Z,1513236365.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:05.431Z,1513236365.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:05.801Z,1513236365.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:05.831Z,1513236365.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:05.835Z,1513236365.835 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:21:05.6Z
2017-12-14T07:26:05.835Z,1513236365.835 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:26:05.835Z,1513236365.835 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:26:06.208Z,1513236366.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:06.240Z,1513236366.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:10.247Z,1513236370.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:10.296Z,1513236370.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:10.381Z,1513236370.381 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0160.lzma
2017-12-14T07:26:10.419Z,1513236370.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:10.439Z,1513236370.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:10.807Z,1513236370.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:10.837Z,1513236370.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:11.143Z,1513236371.143 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0160.lzma.bak
2017-12-14T07:26:11.144Z,1513236371.144 [DataOverHttps](INFO): SBD MOMSN=5438243
2017-12-14T07:26:11.195Z,1513236371.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:11.223Z,1513236371.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:12.297Z,1513236372.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:12.312Z,1513236372.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:12.423Z,1513236372.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:12.447Z,1513236372.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:16.051Z,1513236376.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:16.071Z,1513236376.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:16.183Z,1513236376.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:16.230Z,1513236376.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:16.584Z,1513236376.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:16.634Z,1513236376.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:16.922Z,1513236376.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:16.949Z,1513236376.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:17.337Z,1513236377.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:17.352Z,1513236377.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:17.728Z,1513236377.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:17.748Z,1513236377.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:24.805Z,1513236384.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:24.931Z,1513236384.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:25.017Z,1513236385.017 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0161.lzma
2017-12-14T07:26:25.051Z,1513236385.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:25.099Z,1513236385.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:25.411Z,1513236385.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:25.447Z,1513236385.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:26.019Z,1513236386.019 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0161.lzma.bak
2017-12-14T07:26:26.020Z,1513236386.020 [DataOverHttps](INFO): SBD MOMSN=5438245
2017-12-14T07:26:26.068Z,1513236386.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:26.134Z,1513236386.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:28.081Z,1513236388.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:28.115Z,1513236388.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:28.118Z,1513236388.118 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:26:28.118Z,1513236388.118 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:26:28.119Z,1513236388.119 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:26:28.223Z,1513236388.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:28.308Z,1513236388.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:32.220Z,1513236392.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:32.235Z,1513236392.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:32.352Z,1513236392.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:32.390Z,1513236392.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:32.726Z,1513236392.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:32.747Z,1513236392.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:33.122Z,1513236393.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:33.136Z,1513236393.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:33.514Z,1513236393.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:33.529Z,1513236393.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:33.904Z,1513236393.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:33.920Z,1513236393.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:34.304Z,1513236394.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:34.318Z,1513236394.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:34.718Z,1513236394.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:34.732Z,1513236394.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:35.117Z,1513236395.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:35.132Z,1513236395.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:35.519Z,1513236395.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:35.552Z,1513236395.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:35.907Z,1513236395.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:35.930Z,1513236395.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:36.304Z,1513236396.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:36.374Z,1513236396.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:36.715Z,1513236396.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:36.762Z,1513236396.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:37.118Z,1513236397.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:37.197Z,1513236397.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:37.515Z,1513236397.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:37.542Z,1513236397.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:37.915Z,1513236397.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:37.938Z,1513236397.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:38.326Z,1513236398.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:38.377Z,1513236398.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:38.759Z,1513236398.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:38.819Z,1513236398.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:39.119Z,1513236399.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:39.143Z,1513236399.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:39.515Z,1513236399.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:39.558Z,1513236399.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:39.905Z,1513236399.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:39.965Z,1513236399.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:40.364Z,1513236400.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:40.433Z,1513236400.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:40.721Z,1513236400.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:40.753Z,1513236400.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:41.119Z,1513236401.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:41.155Z,1513236401.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:41.549Z,1513236401.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:41.606Z,1513236401.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:41.913Z,1513236401.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:41.951Z,1513236401.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:42.312Z,1513236402.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:42.373Z,1513236402.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:42.725Z,1513236402.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:42.774Z,1513236402.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:43.115Z,1513236403.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:43.138Z,1513236403.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:43.511Z,1513236403.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:43.547Z,1513236403.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:43.941Z,1513236403.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:43.988Z,1513236403.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:44.338Z,1513236404.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:44.400Z,1513236404.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:44.727Z,1513236404.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:44.767Z,1513236404.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:45.125Z,1513236405.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:45.168Z,1513236405.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:45.512Z,1513236405.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:45.540Z,1513236405.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:45.912Z,1513236405.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:45.973Z,1513236405.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:46.326Z,1513236406.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:46.380Z,1513236406.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:46.730Z,1513236406.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:46.768Z,1513236406.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:47.128Z,1513236407.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:47.148Z,1513236407.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:47.529Z,1513236407.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:47.590Z,1513236407.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:47.904Z,1513236407.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:47.942Z,1513236407.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:48.302Z,1513236408.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:48.360Z,1513236408.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:48.722Z,1513236408.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:48.764Z,1513236408.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:49.121Z,1513236409.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:49.156Z,1513236409.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:49.521Z,1513236409.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:49.563Z,1513236409.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:49.914Z,1513236409.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:49.955Z,1513236409.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:50.312Z,1513236410.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:50.378Z,1513236410.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:50.714Z,1513236410.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:50.728Z,1513236410.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:51.118Z,1513236411.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:51.132Z,1513236411.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:51.518Z,1513236411.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:51.533Z,1513236411.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:51.918Z,1513236411.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:51.933Z,1513236411.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:52.307Z,1513236412.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:52.339Z,1513236412.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:52.723Z,1513236412.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:52.738Z,1513236412.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:53.125Z,1513236413.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:53.141Z,1513236413.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:53.522Z,1513236413.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:53.537Z,1513236413.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:53.903Z,1513236413.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:53.934Z,1513236413.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:54.342Z,1513236414.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:54.363Z,1513236414.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:54.724Z,1513236414.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:54.739Z,1513236414.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:55.138Z,1513236415.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:55.223Z,1513236415.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:55.518Z,1513236415.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:55.581Z,1513236415.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:55.908Z,1513236415.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:55.940Z,1513236415.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:56.312Z,1513236416.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:56.348Z,1513236416.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:56.747Z,1513236416.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:56.806Z,1513236416.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:57.121Z,1513236417.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:57.151Z,1513236417.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:57.522Z,1513236417.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:57.554Z,1513236417.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:57.911Z,1513236417.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:57.963Z,1513236417.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:58.310Z,1513236418.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:58.350Z,1513236418.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:58.714Z,1513236418.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:58.771Z,1513236418.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:59.133Z,1513236419.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:59.157Z,1513236419.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:59.521Z,1513236419.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:59.551Z,1513236419.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:26:59.946Z,1513236419.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:26:59.998Z,1513236419.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:00.318Z,1513236420.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:00.347Z,1513236420.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:00.771Z,1513236420.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:00.796Z,1513236420.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:01.121Z,1513236421.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:01.163Z,1513236421.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:01.522Z,1513236421.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:01.551Z,1513236421.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:01.910Z,1513236421.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:01.945Z,1513236421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:02.304Z,1513236422.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:02.320Z,1513236422.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:02.722Z,1513236422.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:02.748Z,1513236422.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:03.186Z,1513236423.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:03.246Z,1513236423.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:03.522Z,1513236423.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:03.571Z,1513236423.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:03.908Z,1513236423.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:03.923Z,1513236423.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:04.311Z,1513236424.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:04.326Z,1513236424.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:04.723Z,1513236424.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:04.755Z,1513236424.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:05.125Z,1513236425.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:05.155Z,1513236425.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:05.521Z,1513236425.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:05.562Z,1513236425.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:05.912Z,1513236425.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:05.928Z,1513236425.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:06.118Z,1513236426.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:06.331Z,1513236426.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:06.364Z,1513236426.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:06.725Z,1513236426.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:06.747Z,1513236426.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:06.914Z,1513236426.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:07.126Z,1513236427.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:07.141Z,1513236427.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:07.317Z,1513236427.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:07.522Z,1513236427.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:07.551Z,1513236427.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:07.907Z,1513236427.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:07.933Z,1513236427.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:08.114Z,1513236428.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:08.302Z,1513236428.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:08.336Z,1513236428.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:08.740Z,1513236428.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:08.761Z,1513236428.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:08.910Z,1513236428.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:09.142Z,1513236429.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:09.163Z,1513236429.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:09.313Z,1513236429.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:09.521Z,1513236429.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:09.546Z,1513236429.546 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:27:09.546Z,1513236429.546 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:27:09.546Z,1513236429.546 [BPC1](ERROR): Data Fault
2017-12-14T07:27:09.555Z,1513236429.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:09.617Z,1513236429.617 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:27:09.912Z,1513236429.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:09.927Z,1513236429.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:10.109Z,1513236430.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:10.310Z,1513236430.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:10.325Z,1513236430.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:10.725Z,1513236430.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:10.752Z,1513236430.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:10.766Z,1513236430.766 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:27:10.766Z,1513236430.766 [BPC1] No Fault, FailCount= 1
2017-12-14T07:27:10.905Z,1513236430.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:11.129Z,1513236431.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:11.215Z,1513236431.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:11.309Z,1513236431.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:11.522Z,1513236431.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:11.555Z,1513236431.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:11.905Z,1513236431.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:11.920Z,1513236431.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:12.106Z,1513236432.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:12.302Z,1513236432.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:12.338Z,1513236432.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:12.734Z,1513236432.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:12.818Z,1513236432.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:12.902Z,1513236432.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:13.134Z,1513236433.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:13.171Z,1513236433.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:13.305Z,1513236433.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:13.525Z,1513236433.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:13.540Z,1513236433.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:13.916Z,1513236433.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:13.931Z,1513236433.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:14.103Z,1513236434.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:14.314Z,1513236434.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:14.331Z,1513236434.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:14.721Z,1513236434.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:14.739Z,1513236434.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:14.897Z,1513236434.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:15.125Z,1513236435.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:15.140Z,1513236435.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:15.303Z,1513236435.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:15.525Z,1513236435.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:15.540Z,1513236435.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:15.903Z,1513236435.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:15.982Z,1513236435.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:16.302Z,1513236436.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:16.336Z,1513236436.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:16.728Z,1513236436.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:16.755Z,1513236436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:17.123Z,1513236437.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:17.142Z,1513236437.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:17.524Z,1513236437.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:17.538Z,1513236437.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:17.904Z,1513236437.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:17.935Z,1513236437.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:18.302Z,1513236438.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:18.340Z,1513236438.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:18.709Z,1513236438.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:18.732Z,1513236438.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:19.157Z,1513236439.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:19.208Z,1513236439.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:19.531Z,1513236439.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:19.589Z,1513236439.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:19.911Z,1513236439.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:19.941Z,1513236439.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:20.125Z,1513236440.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:20.306Z,1513236440.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:20.320Z,1513236440.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:20.699Z,1513236440.699 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T07:27:20.699Z,1513236440.699 [NAL9602] Data Fault, FailCount= 3
2017-12-14T07:27:20.699Z,1513236440.699 [NAL9602](ERROR): Data Fault
2017-12-14T07:27:20.716Z,1513236440.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:20.763Z,1513236440.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:20.799Z,1513236440.799 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T07:27:20.921Z,1513236440.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:21.090Z,1513236441.090 [NAL9602](INFO): Powering down
2017-12-14T07:27:21.108Z,1513236441.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:21.148Z,1513236441.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:21.325Z,1513236441.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:21.508Z,1513236441.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:21.523Z,1513236441.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:21.908Z,1513236441.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:21.927Z,1513236441.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:21.971Z,1513236441.971 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T07:27:21.971Z,1513236441.971 [NAL9602] No Fault, FailCount= 3
2017-12-14T07:27:22.121Z,1513236442.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:22.344Z,1513236442.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:22.375Z,1513236442.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:22.712Z,1513236442.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:22.731Z,1513236442.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:22.917Z,1513236442.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:23.118Z,1513236443.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:23.161Z,1513236443.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:23.321Z,1513236443.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:23.506Z,1513236443.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:23.520Z,1513236443.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:23.912Z,1513236443.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:23.955Z,1513236443.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:24.118Z,1513236444.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:24.310Z,1513236444.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:24.324Z,1513236444.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:24.710Z,1513236444.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:24.725Z,1513236444.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:24.913Z,1513236444.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:25.105Z,1513236445.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:25.146Z,1513236445.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:25.317Z,1513236445.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:25.540Z,1513236445.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:25.602Z,1513236445.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:25.907Z,1513236445.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:25.922Z,1513236445.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:26.114Z,1513236446.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:26.308Z,1513236446.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:26.327Z,1513236446.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:26.711Z,1513236446.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:26.731Z,1513236446.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:26.910Z,1513236446.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:27.113Z,1513236447.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:27.127Z,1513236447.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:27.313Z,1513236447.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:27.513Z,1513236447.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:27.528Z,1513236447.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:27.910Z,1513236447.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:27.926Z,1513236447.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:28.110Z,1513236448.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:28.313Z,1513236448.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:28.328Z,1513236448.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:28.764Z,1513236448.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:28.811Z,1513236448.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:28.906Z,1513236448.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:29.309Z,1513236449.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:30.106Z,1513236450.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:30.903Z,1513236450.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:31.341Z,1513236451.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:32.123Z,1513236452.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:32.138Z,1513236452.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:32.199Z,1513236452.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:32.294Z,1513236452.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:32.333Z,1513236452.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:32.696Z,1513236452.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:32.712Z,1513236452.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:32.934Z,1513236452.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:33.098Z,1513236453.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:33.120Z,1513236453.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:33.421Z,1513236453.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:33.498Z,1513236453.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:33.551Z,1513236453.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:33.900Z,1513236453.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:33.914Z,1513236453.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:34.217Z,1513236454.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:34.300Z,1513236454.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:34.347Z,1513236454.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:34.699Z,1513236454.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:34.714Z,1513236454.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:34.981Z,1513236454.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:35.117Z,1513236455.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:35.157Z,1513236455.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:35.490Z,1513236455.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:35.519Z,1513236455.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:35.777Z,1513236455.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:35.888Z,1513236455.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:35.910Z,1513236455.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:36.290Z,1513236456.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:36.322Z,1513236456.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:36.574Z,1513236456.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:36.691Z,1513236456.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:36.727Z,1513236456.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:36.981Z,1513236456.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:37.095Z,1513236457.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:37.122Z,1513236457.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:37.494Z,1513236457.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:37.521Z,1513236457.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:37.777Z,1513236457.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:37.888Z,1513236457.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:37.922Z,1513236457.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:38.349Z,1513236458.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:38.391Z,1513236458.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:38.574Z,1513236458.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:38.692Z,1513236458.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:38.727Z,1513236458.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:39.094Z,1513236459.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:39.108Z,1513236459.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:39.499Z,1513236459.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:39.514Z,1513236459.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:39.895Z,1513236459.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:39.910Z,1513236459.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:40.299Z,1513236460.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:40.313Z,1513236460.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:40.699Z,1513236460.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:40.714Z,1513236460.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:41.099Z,1513236461.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:41.113Z,1513236461.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:41.500Z,1513236461.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:41.515Z,1513236461.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:41.899Z,1513236461.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:41.913Z,1513236461.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:42.299Z,1513236462.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:42.315Z,1513236462.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:42.697Z,1513236462.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:42.751Z,1513236462.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:43.103Z,1513236463.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:43.118Z,1513236463.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:43.500Z,1513236463.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:43.515Z,1513236463.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:43.904Z,1513236463.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:43.928Z,1513236463.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:44.305Z,1513236464.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:44.320Z,1513236464.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:44.727Z,1513236464.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:44.787Z,1513236464.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:45.090Z,1513236465.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:45.124Z,1513236465.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:45.357Z,1513236465.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:45.494Z,1513236465.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:45.521Z,1513236465.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:45.889Z,1513236465.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:45.927Z,1513236465.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:46.153Z,1513236466.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:46.294Z,1513236466.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:46.327Z,1513236466.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:46.691Z,1513236466.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:46.718Z,1513236466.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:47.090Z,1513236467.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:47.129Z,1513236467.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:47.490Z,1513236467.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:47.522Z,1513236467.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:47.894Z,1513236467.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:47.943Z,1513236467.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:48.150Z,1513236468.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:48.316Z,1513236468.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:48.331Z,1513236468.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:48.695Z,1513236468.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:48.723Z,1513236468.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:48.945Z,1513236468.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:49.092Z,1513236469.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:49.120Z,1513236469.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:49.349Z,1513236469.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:49.502Z,1513236469.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:49.518Z,1513236469.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:49.898Z,1513236469.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:49.916Z,1513236469.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:50.145Z,1513236470.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:50.290Z,1513236470.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:50.322Z,1513236470.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:50.690Z,1513236470.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:50.716Z,1513236470.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:50.943Z,1513236470.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:51.108Z,1513236471.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:51.123Z,1513236471.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:51.349Z,1513236471.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:51.474Z,1513236471.474 [NAL9602](INFO): Powering up NAL9602
2017-12-14T07:27:51.491Z,1513236471.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:51.527Z,1513236471.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:51.891Z,1513236471.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:51.927Z,1513236471.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:52.146Z,1513236472.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:52.294Z,1513236472.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:52.318Z,1513236472.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:52.690Z,1513236472.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:52.722Z,1513236472.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:52.942Z,1513236472.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:53.090Z,1513236473.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:53.123Z,1513236473.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:53.345Z,1513236473.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:53.491Z,1513236473.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:53.562Z,1513236473.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:53.888Z,1513236473.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:53.912Z,1513236473.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:54.142Z,1513236474.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:54.314Z,1513236474.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:54.385Z,1513236474.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:54.690Z,1513236474.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:54.704Z,1513236474.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:54.938Z,1513236474.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:55.090Z,1513236475.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:55.143Z,1513236475.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:55.341Z,1513236475.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:55.494Z,1513236475.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:55.525Z,1513236475.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:55.895Z,1513236475.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:55.910Z,1513236475.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:56.137Z,1513236476.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:56.295Z,1513236476.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:56.310Z,1513236476.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:56.702Z,1513236476.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:56.758Z,1513236476.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:56.933Z,1513236476.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:57.101Z,1513236477.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:57.116Z,1513236477.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:57.337Z,1513236477.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:57.507Z,1513236477.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:57.547Z,1513236477.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:57.900Z,1513236477.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:57.915Z,1513236477.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:58.299Z,1513236478.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:58.313Z,1513236478.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:58.698Z,1513236478.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:58.713Z,1513236478.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:59.098Z,1513236479.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:59.112Z,1513236479.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:59.499Z,1513236479.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:59.513Z,1513236479.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:27:59.896Z,1513236479.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:27:59.911Z,1513236479.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:00.295Z,1513236480.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:00.325Z,1513236480.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:00.721Z,1513236480.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:00.763Z,1513236480.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:01.097Z,1513236481.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:01.112Z,1513236481.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:01.500Z,1513236481.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:01.527Z,1513236481.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:01.912Z,1513236481.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:01.926Z,1513236481.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:02.142Z,1513236482.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:02.278Z,1513236482.278 [NAL9602](INFO): NAL9602 initialized
2017-12-14T07:28:02.306Z,1513236482.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:02.325Z,1513236482.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:02.701Z,1513236482.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:02.763Z,1513236482.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:02.940Z,1513236482.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:03.105Z,1513236483.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:03.142Z,1513236483.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:03.345Z,1513236483.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:03.512Z,1513236483.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:03.567Z,1513236483.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:03.912Z,1513236483.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:03.931Z,1513236483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:04.142Z,1513236484.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:04.295Z,1513236484.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:04.327Z,1513236484.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:04.703Z,1513236484.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:04.729Z,1513236484.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:04.937Z,1513236484.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:05.093Z,1513236485.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:05.120Z,1513236485.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:05.342Z,1513236485.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:05.491Z,1513236485.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:05.506Z,1513236485.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:05.906Z,1513236485.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:05.942Z,1513236485.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:06.138Z,1513236486.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:06.310Z,1513236486.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:06.334Z,1513236486.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:06.701Z,1513236486.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:06.730Z,1513236486.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:06.933Z,1513236486.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:07.118Z,1513236487.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:07.146Z,1513236487.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:07.337Z,1513236487.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:07.501Z,1513236487.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:07.516Z,1513236487.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:07.897Z,1513236487.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:07.914Z,1513236487.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:08.133Z,1513236488.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:08.300Z,1513236488.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:08.316Z,1513236488.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:08.700Z,1513236488.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:08.715Z,1513236488.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:08.931Z,1513236488.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:09.144Z,1513236489.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:09.168Z,1513236489.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:09.506Z,1513236489.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:09.521Z,1513236489.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:09.905Z,1513236489.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:09.919Z,1513236489.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:10.324Z,1513236490.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:10.359Z,1513236490.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:10.708Z,1513236490.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:10.728Z,1513236490.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:11.103Z,1513236491.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:11.118Z,1513236491.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:11.498Z,1513236491.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:11.525Z,1513236491.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:11.914Z,1513236491.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:11.929Z,1513236491.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:12.314Z,1513236492.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:12.335Z,1513236492.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:12.708Z,1513236492.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:12.737Z,1513236492.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:13.090Z,1513236493.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:13.124Z,1513236493.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:13.502Z,1513236493.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:13.538Z,1513236493.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:13.891Z,1513236493.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:13.927Z,1513236493.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:14.293Z,1513236494.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:14.383Z,1513236494.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:14.694Z,1513236494.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:14.710Z,1513236494.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:15.120Z,1513236495.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:15.185Z,1513236495.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:15.509Z,1513236495.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:15.540Z,1513236495.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:15.901Z,1513236495.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:15.953Z,1513236495.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:16.122Z,1513236496.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:16.291Z,1513236496.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:16.305Z,1513236496.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:16.732Z,1513236496.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:16.755Z,1513236496.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:16.918Z,1513236496.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:17.102Z,1513236497.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:17.116Z,1513236497.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:17.321Z,1513236497.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:17.495Z,1513236497.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:17.523Z,1513236497.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:17.898Z,1513236497.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:17.916Z,1513236497.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:18.118Z,1513236498.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:18.309Z,1513236498.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:18.323Z,1513236498.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:18.702Z,1513236498.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:18.716Z,1513236498.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:18.913Z,1513236498.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:19.102Z,1513236499.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:19.135Z,1513236499.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:19.317Z,1513236499.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:19.496Z,1513236499.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:19.526Z,1513236499.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:19.926Z,1513236499.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:19.948Z,1513236499.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:20.114Z,1513236500.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:20.300Z,1513236500.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:20.320Z,1513236500.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:20.701Z,1513236500.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:20.715Z,1513236500.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:20.910Z,1513236500.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:21.102Z,1513236501.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:21.117Z,1513236501.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:21.313Z,1513236501.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:21.506Z,1513236501.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:21.520Z,1513236501.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:21.905Z,1513236501.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:21.927Z,1513236501.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:22.110Z,1513236502.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:22.303Z,1513236502.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:22.318Z,1513236502.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:22.699Z,1513236502.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:22.719Z,1513236502.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:22.905Z,1513236502.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:23.147Z,1513236503.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:23.174Z,1513236503.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:23.310Z,1513236503.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:23.500Z,1513236503.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:23.519Z,1513236503.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:23.914Z,1513236503.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:23.929Z,1513236503.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:24.105Z,1513236504.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:24.313Z,1513236504.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:24.360Z,1513236504.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:24.709Z,1513236504.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:24.731Z,1513236504.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:24.731Z,1513236504.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139
2017-12-14T07:28:24.731Z,1513236504.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:28:24.733Z,1513236504.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:24.733Z,1513236504.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 139
2017-12-14T07:28:24.733Z,1513236504.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:28:24.735Z,1513236504.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:24.735Z,1513236504.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2017-12-14T07:28:24.735Z,1513236504.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:28:24.792Z,1513236504.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:28:24.792Z,1513236504.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:28:24.792Z,1513236504.792 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:28:24.903Z,1513236504.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:25.091Z,1513236505.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:25.134Z,1513236505.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:28:25.134Z,1513236505.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139
2017-12-14T07:28:25.135Z,1513236505.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:28:25.135Z,1513236505.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 139
2017-12-14T07:28:25.135Z,1513236505.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:28:25.135Z,1513236505.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2017-12-14T07:28:25.309Z,1513236505.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:25.490Z,1513236505.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:25.521Z,1513236505.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:28:25.521Z,1513236505.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:28:25.521Z,1513236505.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:28:25.522Z,1513236505.522 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:28:25.522Z,1513236505.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:28:25.523Z,1513236505.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:28:25.523Z,1513236505.523 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:28:25.523Z,1513236505.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:28:25.524Z,1513236505.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:28:25.891Z,1513236505.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:25.929Z,1513236505.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:26.321Z,1513236506.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:26.352Z,1513236506.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:26.697Z,1513236506.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:26.730Z,1513236506.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:27.101Z,1513236507.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:27.134Z,1513236507.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:27.509Z,1513236507.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:27.538Z,1513236507.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:27.909Z,1513236507.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:27.935Z,1513236507.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:28.126Z,1513236508.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:28.295Z,1513236508.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:28.315Z,1513236508.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:28.692Z,1513236508.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:28.711Z,1513236508.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:28.924Z,1513236508.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:29.104Z,1513236509.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:29.119Z,1513236509.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:29.329Z,1513236509.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:30.126Z,1513236510.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:30.921Z,1513236510.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:31.325Z,1513236511.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:32.122Z,1513236512.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:32.644Z,1513236512.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:32.659Z,1513236512.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:32.802Z,1513236512.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:32.826Z,1513236512.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:32.918Z,1513236512.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:33.154Z,1513236513.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:33.181Z,1513236513.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:33.321Z,1513236513.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:33.563Z,1513236513.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:33.591Z,1513236513.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:33.935Z,1513236513.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:33.963Z,1513236513.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:34.118Z,1513236514.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:34.331Z,1513236514.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:34.358Z,1513236514.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:34.770Z,1513236514.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:34.785Z,1513236514.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:34.913Z,1513236514.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:35.157Z,1513236515.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:35.228Z,1513236515.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:35.317Z,1513236515.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:35.550Z,1513236515.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:35.592Z,1513236515.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:35.975Z,1513236515.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:36.027Z,1513236516.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:36.114Z,1513236516.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:36.339Z,1513236516.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:36.386Z,1513236516.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:36.766Z,1513236516.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:36.820Z,1513236516.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:36.910Z,1513236516.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:37.166Z,1513236517.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:37.199Z,1513236517.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:37.313Z,1513236517.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:37.542Z,1513236517.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:37.582Z,1513236517.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:37.937Z,1513236517.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:37.952Z,1513236517.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:38.109Z,1513236518.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:38.338Z,1513236518.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:38.380Z,1513236518.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:38.750Z,1513236518.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:38.772Z,1513236518.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:38.909Z,1513236518.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:39.152Z,1513236519.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:39.199Z,1513236519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:39.314Z,1513236519.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:39.554Z,1513236519.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:39.584Z,1513236519.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:39.940Z,1513236519.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:39.990Z,1513236519.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:40.337Z,1513236520.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:40.386Z,1513236520.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:40.753Z,1513236520.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:40.794Z,1513236520.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:41.154Z,1513236521.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:41.183Z,1513236521.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:41.556Z,1513236521.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:41.585Z,1513236521.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:41.941Z,1513236521.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:41.987Z,1513236521.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:42.129Z,1513236522.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:42.332Z,1513236522.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:42.391Z,1513236522.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:42.750Z,1513236522.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:42.773Z,1513236522.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:42.926Z,1513236522.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:43.162Z,1513236523.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:43.179Z,1513236523.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:43.329Z,1513236523.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:43.542Z,1513236523.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:43.575Z,1513236523.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:43.949Z,1513236523.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:43.964Z,1513236523.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:44.126Z,1513236524.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:44.343Z,1513236524.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:44.364Z,1513236524.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:44.756Z,1513236524.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:44.771Z,1513236524.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:44.922Z,1513236524.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:45.150Z,1513236525.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:45.211Z,1513236525.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:45.325Z,1513236525.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:45.604Z,1513236525.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:45.654Z,1513236525.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:45.944Z,1513236525.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:45.979Z,1513236525.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:46.122Z,1513236526.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:46.335Z,1513236526.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:46.373Z,1513236526.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:46.730Z,1513236526.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:46.769Z,1513236526.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:46.917Z,1513236526.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:47.131Z,1513236527.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:47.164Z,1513236527.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:47.321Z,1513236527.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:47.543Z,1513236527.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:47.570Z,1513236527.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:47.954Z,1513236527.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:47.979Z,1513236527.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:48.117Z,1513236528.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:48.353Z,1513236528.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:48.390Z,1513236528.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:48.804Z,1513236528.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:48.828Z,1513236528.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:48.914Z,1513236528.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:49.131Z,1513236529.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:49.175Z,1513236529.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:49.317Z,1513236529.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:49.528Z,1513236529.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:49.543Z,1513236529.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:49.939Z,1513236529.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:49.974Z,1513236529.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:50.114Z,1513236530.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:50.340Z,1513236530.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:50.354Z,1513236530.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:50.742Z,1513236530.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:50.778Z,1513236530.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:50.910Z,1513236530.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:51.156Z,1513236531.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:51.183Z,1513236531.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:51.316Z,1513236531.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:51.546Z,1513236531.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:51.589Z,1513236531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:51.997Z,1513236531.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:52.039Z,1513236532.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:52.110Z,1513236532.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:52.339Z,1513236532.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:52.383Z,1513236532.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:52.835Z,1513236532.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:52.851Z,1513236532.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:52.905Z,1513236532.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:53.148Z,1513236533.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:53.196Z,1513236533.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:53.309Z,1513236533.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:53.552Z,1513236533.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:53.579Z,1513236533.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:53.944Z,1513236533.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:53.966Z,1513236533.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:54.343Z,1513236534.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:54.366Z,1513236534.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:54.751Z,1513236534.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:54.796Z,1513236534.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:55.203Z,1513236535.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:55.231Z,1513236535.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:55.551Z,1513236535.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:55.611Z,1513236535.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:55.932Z,1513236535.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:55.957Z,1513236535.957 [PNI_TCM](ERROR): CRC does not match. Expected:0x46140 got:0x16850
2017-12-14T07:28:56.008Z,1513236536.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:56.130Z,1513236536.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:56.330Z,1513236536.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:56.356Z,1513236536.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:56.755Z,1513236536.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:56.807Z,1513236536.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:56.926Z,1513236536.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:57.153Z,1513236537.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:57.181Z,1513236537.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:57.341Z,1513236537.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:57.562Z,1513236537.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:57.607Z,1513236537.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:57.935Z,1513236537.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:57.964Z,1513236537.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:58.138Z,1513236538.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:58.331Z,1513236538.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:58.383Z,1513236538.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:58.746Z,1513236538.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:58.789Z,1513236538.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:58.933Z,1513236538.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:59.148Z,1513236539.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:59.178Z,1513236539.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:59.337Z,1513236539.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:59.544Z,1513236539.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:28:59.572Z,1513236539.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:28:59.942Z,1513236539.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:00.036Z,1513236540.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:00.133Z,1513236540.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:00.338Z,1513236540.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:00.353Z,1513236540.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:00.753Z,1513236540.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:00.770Z,1513236540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:00.929Z,1513236540.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:01.151Z,1513236541.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:01.198Z,1513236541.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:01.333Z,1513236541.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:01.550Z,1513236541.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:01.565Z,1513236541.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:01.939Z,1513236541.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:01.967Z,1513236541.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:02.131Z,1513236542.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:02.339Z,1513236542.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:02.361Z,1513236542.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:02.751Z,1513236542.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:02.767Z,1513236542.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:02.925Z,1513236542.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:03.155Z,1513236543.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:03.179Z,1513236543.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:03.329Z,1513236543.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:03.561Z,1513236543.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:03.579Z,1513236543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:03.932Z,1513236543.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:03.986Z,1513236543.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:04.126Z,1513236544.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:04.335Z,1513236544.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:04.350Z,1513236544.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:04.774Z,1513236544.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:04.828Z,1513236544.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:04.922Z,1513236544.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:05.147Z,1513236545.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:05.183Z,1513236545.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:05.325Z,1513236545.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:05.565Z,1513236545.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:05.579Z,1513236545.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:05.936Z,1513236545.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:06.000Z,1513236546.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:06.122Z,1513236546.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:06.335Z,1513236546.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:06.352Z,1513236546.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:06.774Z,1513236546.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:06.795Z,1513236546.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:06.917Z,1513236546.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:07.172Z,1513236547.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:07.188Z,1513236547.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:07.321Z,1513236547.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:07.550Z,1513236547.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:07.589Z,1513236547.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:07.979Z,1513236547.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:08.020Z,1513236548.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:08.119Z,1513236548.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:08.339Z,1513236548.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:08.379Z,1513236548.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:08.742Z,1513236548.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:08.764Z,1513236548.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:08.914Z,1513236548.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:09.146Z,1513236549.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:09.189Z,1513236549.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:09.329Z,1513236549.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:09.546Z,1513236549.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:09.560Z,1513236549.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:09.626Z,1513236549.626 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:29:09.932Z,1513236549.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:09.948Z,1513236549.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:10.126Z,1513236550.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:10.330Z,1513236550.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:10.349Z,1513236550.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:10.750Z,1513236550.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:10.779Z,1513236550.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:10.922Z,1513236550.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:11.176Z,1513236551.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:11.221Z,1513236551.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:11.330Z,1513236551.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:11.570Z,1513236551.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:11.585Z,1513236551.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:11.940Z,1513236551.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:11.979Z,1513236551.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:12.126Z,1513236552.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:12.332Z,1513236552.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:12.386Z,1513236552.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:12.754Z,1513236552.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:12.784Z,1513236552.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:12.921Z,1513236552.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:13.154Z,1513236553.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:13.191Z,1513236553.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:13.325Z,1513236553.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:13.558Z,1513236553.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:13.581Z,1513236553.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:13.939Z,1513236553.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:13.981Z,1513236553.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:14.122Z,1513236554.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:14.357Z,1513236554.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:14.405Z,1513236554.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:14.744Z,1513236554.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:14.786Z,1513236554.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:14.800Z,1513236554.800 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T07:29:14.800Z,1513236554.800 [DropWeight] No Fault, FailCount= 1
2017-12-14T07:29:14.917Z,1513236554.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:15.149Z,1513236555.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:15.181Z,1513236555.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:15.324Z,1513236555.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:15.604Z,1513236555.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:15.640Z,1513236555.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:15.942Z,1513236555.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:15.986Z,1513236555.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:16.118Z,1513236556.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:16.336Z,1513236556.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:16.366Z,1513236556.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:16.740Z,1513236556.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:16.814Z,1513236556.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:16.913Z,1513236556.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:17.134Z,1513236557.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:17.191Z,1513236557.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:17.317Z,1513236557.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:17.534Z,1513236557.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:17.560Z,1513236557.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:17.959Z,1513236557.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:18.014Z,1513236558.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:18.114Z,1513236558.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:18.368Z,1513236558.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:18.383Z,1513236558.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:18.753Z,1513236558.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:18.811Z,1513236558.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:18.910Z,1513236558.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:19.131Z,1513236559.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:19.158Z,1513236559.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:19.313Z,1513236559.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:19.535Z,1513236559.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:19.572Z,1513236559.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:19.935Z,1513236559.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:19.975Z,1513236559.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:20.109Z,1513236560.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:20.335Z,1513236560.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:20.371Z,1513236560.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:20.757Z,1513236560.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:20.795Z,1513236560.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:20.906Z,1513236560.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:21.152Z,1513236561.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:21.187Z,1513236561.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:21.309Z,1513236561.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:21.550Z,1513236561.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:21.569Z,1513236561.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:21.940Z,1513236561.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:21.991Z,1513236561.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:22.106Z,1513236562.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:22.339Z,1513236562.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:22.354Z,1513236562.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:22.751Z,1513236562.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:22.773Z,1513236562.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:22.903Z,1513236562.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:23.156Z,1513236563.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:23.171Z,1513236563.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:23.325Z,1513236563.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:23.550Z,1513236563.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:23.576Z,1513236563.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:23.962Z,1513236563.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:24.004Z,1513236564.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:24.122Z,1513236564.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:24.331Z,1513236564.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:24.376Z,1513236564.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:24.759Z,1513236564.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:24.779Z,1513236564.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:24.918Z,1513236564.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:25.152Z,1513236565.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:25.178Z,1513236565.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:25.325Z,1513236565.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:25.558Z,1513236565.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:25.580Z,1513236565.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:26.015Z,1513236566.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:26.059Z,1513236566.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:26.122Z,1513236566.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:26.331Z,1513236566.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:26.367Z,1513236566.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:26.751Z,1513236566.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:26.799Z,1513236566.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:26.917Z,1513236566.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:27.150Z,1513236567.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:27.200Z,1513236567.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:27.321Z,1513236567.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:27.558Z,1513236567.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:27.582Z,1513236567.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:27.932Z,1513236567.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:27.982Z,1513236567.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:28.118Z,1513236568.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:28.338Z,1513236568.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:28.370Z,1513236568.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:28.747Z,1513236568.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:28.776Z,1513236568.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:28.913Z,1513236568.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:29.146Z,1513236569.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:29.183Z,1513236569.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:29.317Z,1513236569.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:30.114Z,1513236570.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:30.910Z,1513236570.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:31.314Z,1513236571.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:32.109Z,1513236572.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:32.694Z,1513236572.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:32.735Z,1513236572.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:32.844Z,1513236572.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:32.875Z,1513236572.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:32.905Z,1513236572.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:33.230Z,1513236573.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:33.245Z,1513236573.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:33.309Z,1513236573.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:33.630Z,1513236573.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:33.646Z,1513236573.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:34.030Z,1513236574.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:34.051Z,1513236574.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:34.106Z,1513236574.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:34.445Z,1513236574.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:34.492Z,1513236574.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:34.845Z,1513236574.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:34.860Z,1513236574.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:34.902Z,1513236574.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:35.244Z,1513236575.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:35.259Z,1513236575.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:35.305Z,1513236575.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:35.643Z,1513236575.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:35.657Z,1513236575.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:36.032Z,1513236576.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:36.048Z,1513236576.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:36.102Z,1513236576.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:36.419Z,1513236576.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:36.455Z,1513236576.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:36.832Z,1513236576.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:36.899Z,1513236576.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:36.970Z,1513236576.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:37.220Z,1513236577.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:37.259Z,1513236577.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:37.406Z,1513236577.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:37.620Z,1513236577.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:37.687Z,1513236577.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:38.042Z,1513236578.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:38.066Z,1513236578.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:38.203Z,1513236578.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:38.437Z,1513236578.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:38.489Z,1513236578.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:38.858Z,1513236578.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:38.928Z,1513236578.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:38.998Z,1513236578.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:39.219Z,1513236579.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:39.256Z,1513236579.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:39.401Z,1513236579.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:39.621Z,1513236579.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:39.684Z,1513236579.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:40.024Z,1513236580.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:40.051Z,1513236580.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:40.198Z,1513236580.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:40.419Z,1513236580.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:40.467Z,1513236580.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:40.892Z,1513236580.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:40.931Z,1513236580.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:40.982Z,1513236580.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:41.238Z,1513236581.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:41.264Z,1513236581.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:41.638Z,1513236581.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:41.671Z,1513236581.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:41.777Z,1513236581.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:42.026Z,1513236582.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:42.040Z,1513236582.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:42.423Z,1513236582.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:42.446Z,1513236582.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:42.574Z,1513236582.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:42.837Z,1513236582.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:42.852Z,1513236582.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:42.977Z,1513236582.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:43.228Z,1513236583.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:43.242Z,1513236583.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:43.629Z,1513236583.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:43.651Z,1513236583.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:43.774Z,1513236583.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:44.055Z,1513236584.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:44.083Z,1513236584.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:44.442Z,1513236584.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:44.463Z,1513236584.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:44.570Z,1513236584.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:44.846Z,1513236584.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:44.860Z,1513236584.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:44.997Z,1513236584.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:45.219Z,1513236585.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:45.259Z,1513236585.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:45.623Z,1513236585.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:45.649Z,1513236585.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:45.794Z,1513236585.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:46.024Z,1513236586.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:46.051Z,1513236586.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:46.420Z,1513236586.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:46.446Z,1513236586.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:46.589Z,1513236586.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:46.834Z,1513236586.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:46.874Z,1513236586.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:46.993Z,1513236586.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:47.276Z,1513236587.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:47.314Z,1513236587.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:47.653Z,1513236587.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:47.675Z,1513236587.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:47.792Z,1513236587.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:48.026Z,1513236588.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:48.053Z,1513236588.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:48.427Z,1513236588.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:48.463Z,1513236588.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:48.592Z,1513236588.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:48.839Z,1513236588.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:48.891Z,1513236588.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:49.029Z,1513236589.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:49.228Z,1513236589.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:49.244Z,1513236589.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:49.620Z,1513236589.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:49.636Z,1513236589.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:49.826Z,1513236589.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:50.042Z,1513236590.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:50.075Z,1513236590.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:50.496Z,1513236590.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:50.535Z,1513236590.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:50.622Z,1513236590.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:50.838Z,1513236590.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:50.927Z,1513236590.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:51.220Z,1513236591.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:51.247Z,1513236591.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:51.361Z,1513236591.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:51.623Z,1513236591.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:51.652Z,1513236591.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:52.024Z,1513236592.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:52.051Z,1513236592.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:52.157Z,1513236592.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:52.419Z,1513236592.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:52.455Z,1513236592.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:52.878Z,1513236592.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:52.949Z,1513236592.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:52.954Z,1513236592.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:53.247Z,1513236593.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:53.267Z,1513236593.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:53.357Z,1513236593.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:53.669Z,1513236593.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:53.708Z,1513236593.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:54.019Z,1513236594.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:54.053Z,1513236594.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:54.154Z,1513236594.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:54.423Z,1513236594.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:54.454Z,1513236594.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:54.819Z,1513236594.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:54.861Z,1513236594.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:54.949Z,1513236594.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:55.219Z,1513236595.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:55.255Z,1513236595.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:55.353Z,1513236595.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:55.624Z,1513236595.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:55.663Z,1513236595.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:56.034Z,1513236596.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:56.065Z,1513236596.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:56.150Z,1513236596.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:56.441Z,1513236596.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:56.471Z,1513236596.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:56.832Z,1513236596.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:56.890Z,1513236596.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:56.946Z,1513236596.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:57.228Z,1513236597.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:57.247Z,1513236597.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:57.349Z,1513236597.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:57.630Z,1513236597.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:57.644Z,1513236597.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:58.034Z,1513236598.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:58.049Z,1513236598.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:58.146Z,1513236598.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:58.431Z,1513236598.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:58.446Z,1513236598.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:58.837Z,1513236598.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:58.845Z,1513236598.845 [BPC1](ERROR): Failed to parse message.
2017-12-14T07:29:58.845Z,1513236598.845 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:29:58.845Z,1513236598.845 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:29:58.845Z,1513236598.845 [BPC1](ERROR): Data Fault
2017-12-14T07:29:58.856Z,1513236598.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:58.906Z,1513236598.906 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:29:58.941Z,1513236598.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:59.237Z,1513236599.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:59.258Z,1513236599.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:29:59.345Z,1513236599.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:59.642Z,1513236599.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:29:59.657Z,1513236599.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:00.056Z,1513236600.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:00.099Z,1513236600.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:00.142Z,1513236600.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:00.163Z,1513236600.163 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:30:00.164Z,1513236600.164 [BPC1] No Fault, FailCount= 1
2017-12-14T07:30:00.420Z,1513236600.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:00.576Z,1513236600.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:00.823Z,1513236600.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:00.854Z,1513236600.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:00.939Z,1513236600.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:01.219Z,1513236601.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:01.260Z,1513236601.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:01.345Z,1513236601.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:01.623Z,1513236601.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:01.658Z,1513236601.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:02.033Z,1513236602.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:02.063Z,1513236602.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:02.142Z,1513236602.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:02.448Z,1513236602.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:02.462Z,1513236602.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:02.831Z,1513236602.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:02.851Z,1513236602.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:02.940Z,1513236602.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:03.234Z,1513236603.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:03.274Z,1513236603.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:03.346Z,1513236603.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:03.629Z,1513236603.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:03.643Z,1513236603.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:04.030Z,1513236604.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:04.045Z,1513236604.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:04.142Z,1513236604.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:04.425Z,1513236604.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:04.440Z,1513236604.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:04.837Z,1513236604.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:04.924Z,1513236604.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:04.937Z,1513236604.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:05.242Z,1513236605.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:05.257Z,1513236605.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:05.366Z,1513236605.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:05.634Z,1513236605.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:05.688Z,1513236605.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:06.016Z,1513236606.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:06.054Z,1513236606.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:06.161Z,1513236606.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:06.465Z,1513236606.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:06.499Z,1513236606.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:06.819Z,1513236606.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:06.917Z,1513236606.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:06.957Z,1513236606.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:07.226Z,1513236607.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:07.240Z,1513236607.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:07.361Z,1513236607.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:07.628Z,1513236607.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:07.663Z,1513236607.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:08.033Z,1513236608.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:08.070Z,1513236608.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:08.157Z,1513236608.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:08.445Z,1513236608.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:08.471Z,1513236608.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:08.830Z,1513236608.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:08.876Z,1513236608.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:08.955Z,1513236608.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:09.222Z,1513236609.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:09.244Z,1513236609.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:09.357Z,1513236609.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:09.630Z,1513236609.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:09.645Z,1513236609.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:10.021Z,1513236610.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:10.048Z,1513236610.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:10.154Z,1513236610.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:10.419Z,1513236610.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:10.447Z,1513236610.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:10.838Z,1513236610.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:10.854Z,1513236610.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:10.949Z,1513236610.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:11.238Z,1513236611.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:11.266Z,1513236611.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:11.353Z,1513236611.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:11.642Z,1513236611.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:11.657Z,1513236611.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:12.021Z,1513236612.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:12.053Z,1513236612.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:12.149Z,1513236612.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:12.425Z,1513236612.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:12.452Z,1513236612.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:12.841Z,1513236612.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:12.877Z,1513236612.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:12.946Z,1513236612.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:13.230Z,1513236613.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:13.244Z,1513236613.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:13.349Z,1513236613.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:13.624Z,1513236613.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:13.639Z,1513236613.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:14.038Z,1513236614.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:14.091Z,1513236614.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:14.146Z,1513236614.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:14.442Z,1513236614.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:14.472Z,1513236614.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:14.833Z,1513236614.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:14.848Z,1513236614.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:14.941Z,1513236614.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:15.222Z,1513236615.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:15.240Z,1513236615.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:15.345Z,1513236615.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:15.627Z,1513236615.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:15.643Z,1513236615.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:16.047Z,1513236616.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:16.079Z,1513236616.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:16.142Z,1513236616.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:16.425Z,1513236616.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:16.452Z,1513236616.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:16.842Z,1513236616.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:16.863Z,1513236616.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:16.937Z,1513236616.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:17.239Z,1513236617.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:17.258Z,1513236617.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:17.341Z,1513236617.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:17.642Z,1513236617.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:17.661Z,1513236617.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:18.032Z,1513236618.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:18.046Z,1513236618.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:18.137Z,1513236618.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:18.419Z,1513236618.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:18.450Z,1513236618.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:18.832Z,1513236618.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:18.921Z,1513236618.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:18.933Z,1513236618.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:19.254Z,1513236619.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:19.278Z,1513236619.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:19.353Z,1513236619.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:19.619Z,1513236619.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:19.659Z,1513236619.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:20.034Z,1513236620.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:20.067Z,1513236620.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:20.150Z,1513236620.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:20.433Z,1513236620.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:20.463Z,1513236620.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:20.834Z,1513236620.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:20.946Z,1513236620.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:20.967Z,1513236620.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:21.228Z,1513236621.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:21.243Z,1513236621.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:21.349Z,1513236621.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:21.630Z,1513236621.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:21.645Z,1513236621.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:22.035Z,1513236622.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:22.087Z,1513236622.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:22.146Z,1513236622.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:22.453Z,1513236622.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:22.484Z,1513236622.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:22.833Z,1513236622.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:22.875Z,1513236622.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:22.941Z,1513236622.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:23.252Z,1513236623.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:23.268Z,1513236623.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:23.346Z,1513236623.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:23.641Z,1513236623.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:23.667Z,1513236623.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:24.026Z,1513236624.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:24.040Z,1513236624.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:24.141Z,1513236624.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:24.428Z,1513236624.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:24.443Z,1513236624.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:24.829Z,1513236624.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:24.845Z,1513236624.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:24.937Z,1513236624.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:25.231Z,1513236625.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:25.257Z,1513236625.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:25.341Z,1513236625.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:25.620Z,1513236625.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:25.643Z,1513236625.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:26.041Z,1513236626.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:26.055Z,1513236626.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:26.138Z,1513236626.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:26.444Z,1513236626.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:26.458Z,1513236626.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:26.842Z,1513236626.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:26.933Z,1513236626.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:26.971Z,1513236626.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:27.223Z,1513236627.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:27.250Z,1513236627.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:27.337Z,1513236627.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:27.620Z,1513236627.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:27.647Z,1513236627.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:28.020Z,1513236628.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:28.046Z,1513236628.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:28.134Z,1513236628.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:28.441Z,1513236628.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:28.456Z,1513236628.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:28.899Z,1513236628.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:28.937Z,1513236628.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:28.963Z,1513236628.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:29.247Z,1513236629.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:29.262Z,1513236629.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:29.341Z,1513236629.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:30.137Z,1513236630.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:30.933Z,1513236630.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:31.337Z,1513236631.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:32.134Z,1513236632.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:32.639Z,1513236632.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:32.698Z,1513236632.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:32.790Z,1513236632.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:32.875Z,1513236632.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:32.930Z,1513236632.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:33.204Z,1513236633.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:33.219Z,1513236633.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:33.353Z,1513236633.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:33.600Z,1513236633.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:33.616Z,1513236633.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:34.003Z,1513236634.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:34.017Z,1513236634.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:34.150Z,1513236634.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:34.392Z,1513236634.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:34.415Z,1513236634.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:34.807Z,1513236634.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:34.822Z,1513236634.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:34.945Z,1513236634.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:35.198Z,1513236635.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:35.251Z,1513236635.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:35.350Z,1513236635.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:35.603Z,1513236635.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:35.625Z,1513236635.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:35.995Z,1513236635.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:36.030Z,1513236636.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:36.145Z,1513236636.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:36.390Z,1513236636.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:36.405Z,1513236636.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:36.794Z,1513236636.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:36.809Z,1513236636.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:36.941Z,1513236636.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:37.207Z,1513236637.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:37.231Z,1513236637.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:37.345Z,1513236637.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:37.588Z,1513236637.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:37.619Z,1513236637.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:38.011Z,1513236638.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:38.045Z,1513236638.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:38.142Z,1513236638.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:38.433Z,1513236638.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:38.464Z,1513236638.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:38.805Z,1513236638.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:38.819Z,1513236638.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:38.937Z,1513236638.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:39.188Z,1513236639.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:39.227Z,1513236639.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:39.341Z,1513236639.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:39.591Z,1513236639.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:39.618Z,1513236639.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:40.003Z,1513236640.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:40.018Z,1513236640.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:40.138Z,1513236640.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:40.386Z,1513236640.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:40.423Z,1513236640.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:40.807Z,1513236640.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:40.822Z,1513236640.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:40.933Z,1513236640.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:41.217Z,1513236641.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:41.236Z,1513236641.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:41.337Z,1513236641.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:41.600Z,1513236641.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:41.615Z,1513236641.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:41.993Z,1513236641.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:42.007Z,1513236642.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:42.133Z,1513236642.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:42.394Z,1513236642.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:42.409Z,1513236642.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:42.799Z,1513236642.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:42.835Z,1513236642.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:42.929Z,1513236642.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:43.200Z,1513236643.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:43.220Z,1513236643.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:43.333Z,1513236643.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:43.593Z,1513236643.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:43.616Z,1513236643.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:43.000Z,1513236644.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:44.019Z,1513236644.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:44.130Z,1513236644.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:44.409Z,1513236644.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:44.467Z,1513236644.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:44.813Z,1513236644.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:44.903Z,1513236644.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:44.925Z,1513236644.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:45.188Z,1513236645.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:45.224Z,1513236645.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:45.332Z,1513236645.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:45.600Z,1513236645.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:45.644Z,1513236645.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:45.998Z,1513236645.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:46.019Z,1513236646.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:46.126Z,1513236646.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:46.396Z,1513236646.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:46.451Z,1513236646.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:46.810Z,1513236646.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:46.824Z,1513236646.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:46.921Z,1513236646.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:47.208Z,1513236647.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:47.223Z,1513236647.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:47.341Z,1513236647.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:47.612Z,1513236647.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:47.627Z,1513236647.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:47.990Z,1513236647.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:48.053Z,1513236648.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:48.138Z,1513236648.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:48.401Z,1513236648.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:48.416Z,1513236648.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:48.799Z,1513236648.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:48.901Z,1513236648.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:48.934Z,1513236648.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:49.198Z,1513236649.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:49.212Z,1513236649.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:49.345Z,1513236649.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:49.595Z,1513236649.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:49.612Z,1513236649.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:50.004Z,1513236650.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:50.019Z,1513236650.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:50.142Z,1513236650.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:50.398Z,1513236650.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:50.434Z,1513236650.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:50.798Z,1513236650.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:50.814Z,1513236650.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:50.937Z,1513236650.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:51.222Z,1513236651.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:51.261Z,1513236651.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:51.342Z,1513236651.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:51.597Z,1513236651.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:51.616Z,1513236651.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:52.000Z,1513236652.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:52.015Z,1513236652.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:52.138Z,1513236652.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:52.396Z,1513236652.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:52.411Z,1513236652.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:52.802Z,1513236652.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:52.823Z,1513236652.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:52.933Z,1513236652.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:53.203Z,1513236653.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:53.231Z,1513236653.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:53.337Z,1513236653.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:53.605Z,1513236653.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:53.620Z,1513236653.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:53.987Z,1513236653.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:54.020Z,1513236654.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:54.133Z,1513236654.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:54.429Z,1513236654.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:54.621Z,1513236654.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:54.790Z,1513236654.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:54.821Z,1513236654.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:54.929Z,1513236654.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:55.192Z,1513236655.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:55.227Z,1513236655.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:55.333Z,1513236655.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:55.595Z,1513236655.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:55.631Z,1513236655.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:56.010Z,1513236656.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:56.031Z,1513236656.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:56.401Z,1513236656.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:56.427Z,1513236656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:56.800Z,1513236656.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:56.818Z,1513236656.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:57.195Z,1513236657.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:57.227Z,1513236657.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:57.583Z,1513236657.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:57.598Z,1513236657.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:57.990Z,1513236657.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:58.024Z,1513236658.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:58.395Z,1513236658.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:58.432Z,1513236658.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:58.801Z,1513236658.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:58.824Z,1513236658.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:59.202Z,1513236659.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:59.225Z,1513236659.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:59.618Z,1513236659.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:30:59.632Z,1513236659.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:30:59.996Z,1513236659.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:00.033Z,1513236660.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:00.389Z,1513236660.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:00.406Z,1513236660.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:00.789Z,1513236660.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:00.804Z,1513236660.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:01.190Z,1513236661.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:01.218Z,1513236661.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:01.598Z,1513236661.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:01.614Z,1513236661.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:02.008Z,1513236662.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:02.031Z,1513236662.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:02.411Z,1513236662.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:02.431Z,1513236662.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:02.808Z,1513236662.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:02.824Z,1513236662.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:03.193Z,1513236663.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:03.222Z,1513236663.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:03.588Z,1513236663.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:03.615Z,1513236663.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:03.992Z,1513236663.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:04.018Z,1513236664.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:04.389Z,1513236664.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:04.416Z,1513236664.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:04.809Z,1513236664.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:04.831Z,1513236664.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:05.212Z,1513236665.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:05.228Z,1513236665.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:05.606Z,1513236665.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:05.635Z,1513236665.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:05.995Z,1513236665.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:06.017Z,1513236666.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:06.397Z,1513236666.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:06.476Z,1513236666.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:06.804Z,1513236666.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:06.844Z,1513236666.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:07.200Z,1513236667.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:07.216Z,1513236667.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:07.602Z,1513236667.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:07.652Z,1513236667.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:08.023Z,1513236668.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:08.044Z,1513236668.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:08.406Z,1513236668.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:08.455Z,1513236668.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:08.803Z,1513236668.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:08.819Z,1513236668.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:09.192Z,1513236669.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:09.219Z,1513236669.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:09.593Z,1513236669.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:09.620Z,1513236669.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:09.989Z,1513236669.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:10.025Z,1513236670.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:10.387Z,1513236670.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:10.409Z,1513236670.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:10.799Z,1513236670.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:10.834Z,1513236670.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:11.211Z,1513236671.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:11.243Z,1513236671.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:11.597Z,1513236671.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:11.627Z,1513236671.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:11.987Z,1513236671.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:12.003Z,1513236672.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:12.387Z,1513236672.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:12.402Z,1513236672.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:12.824Z,1513236672.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:12.847Z,1513236672.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:13.200Z,1513236673.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:13.235Z,1513236673.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:13.595Z,1513236673.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:13.635Z,1513236673.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:14.002Z,1513236674.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:14.038Z,1513236674.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:14.439Z,1513236674.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:14.459Z,1513236674.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:14.814Z,1513236674.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:14.887Z,1513236674.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:15.195Z,1513236675.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:15.251Z,1513236675.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:15.611Z,1513236675.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:15.626Z,1513236675.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:16.013Z,1513236676.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:16.032Z,1513236676.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:16.388Z,1513236676.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:16.452Z,1513236676.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:16.879Z,1513236676.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:16.979Z,1513236676.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:17.210Z,1513236677.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:17.235Z,1513236677.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:17.639Z,1513236677.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:17.688Z,1513236677.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:17.990Z,1513236677.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:18.039Z,1513236678.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:18.385Z,1513236678.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:18.432Z,1513236678.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:18.792Z,1513236678.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:18.889Z,1513236678.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:19.206Z,1513236679.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:19.254Z,1513236679.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:19.596Z,1513236679.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:19.620Z,1513236679.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:20.005Z,1513236680.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:20.063Z,1513236680.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:20.428Z,1513236680.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:20.463Z,1513236680.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:20.816Z,1513236680.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:20.863Z,1513236680.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:21.189Z,1513236681.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:21.239Z,1513236681.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:21.619Z,1513236681.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:21.643Z,1513236681.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:21.995Z,1513236681.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:22.038Z,1513236682.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:22.399Z,1513236682.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:22.435Z,1513236682.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:22.818Z,1513236682.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:22.845Z,1513236682.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:23.212Z,1513236683.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:23.227Z,1513236683.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:23.609Z,1513236683.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:23.642Z,1513236683.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:23.987Z,1513236683.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:24.018Z,1513236684.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:24.411Z,1513236684.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:24.442Z,1513236684.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:24.791Z,1513236684.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:24.807Z,1513236684.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:25.197Z,1513236685.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:25.227Z,1513236685.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:25.609Z,1513236685.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:25.636Z,1513236685.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:25.636Z,1513236685.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140
2017-12-14T07:31:25.649Z,1513236685.649 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:31:25.651Z,1513236685.651 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:25.651Z,1513236685.651 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 140
2017-12-14T07:31:25.651Z,1513236685.651 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:31:25.657Z,1513236685.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:25.657Z,1513236685.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2017-12-14T07:31:25.657Z,1513236685.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:31:25.686Z,1513236685.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:31:25.686Z,1513236685.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:31:25.686Z,1513236685.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:31:26.011Z,1513236686.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:26.056Z,1513236686.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:31:26.056Z,1513236686.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140
2017-12-14T07:31:26.073Z,1513236686.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:31:26.073Z,1513236686.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 140
2017-12-14T07:31:26.073Z,1513236686.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:31:26.073Z,1513236686.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2017-12-14T07:31:26.404Z,1513236686.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:26.437Z,1513236686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:31:26.437Z,1513236686.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:31:26.438Z,1513236686.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:31:26.438Z,1513236686.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:31:26.438Z,1513236686.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:31:26.439Z,1513236686.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:31:26.439Z,1513236686.439 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:31:26.440Z,1513236686.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:31:26.440Z,1513236686.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:31:26.811Z,1513236686.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:26.840Z,1513236686.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:27.189Z,1513236687.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:27.235Z,1513236687.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:27.613Z,1513236687.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:27.651Z,1513236687.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:27.996Z,1513236687.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:28.024Z,1513236688.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:28.399Z,1513236688.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:28.423Z,1513236688.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:28.427Z,1513236688.427 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T07:31:28.427Z,1513236688.427 [Default:CheckIn:C.Wait] Stopped
2017-12-14T07:31:28.427Z,1513236688.427 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T07:31:28.427Z,1513236688.427 [Default:CheckIn:D] Running Loop=1
2017-12-14T07:31:28.813Z,1513236688.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:28.967Z,1513236688.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:28.983Z,1513236688.983 [Default:CheckIn:D] Stopped
2017-12-14T07:31:28.983Z,1513236688.983 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:31:29.203Z,1513236689.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:29.275Z,1513236689.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:29.290Z,1513236689.290 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 418.226562 min 
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn:E] Stopped
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn] Stopped
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn](INFO): Running loop #41
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn] Running Loop=41
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:31:29.291Z,1513236689.291 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:31:29.634Z,1513236689.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:29.695Z,1513236689.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:36.636Z,1513236696.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:36.684Z,1513236696.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:36.807Z,1513236696.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:36.841Z,1513236696.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:37.195Z,1513236697.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:37.293Z,1513236697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:37.604Z,1513236697.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:37.648Z,1513236697.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:37.996Z,1513236697.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:38.019Z,1513236698.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:38.376Z,1513236698.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:38.444Z,1513236698.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:38.792Z,1513236698.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:38.863Z,1513236698.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:39.187Z,1513236699.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:39.259Z,1513236699.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:39.612Z,1513236699.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:39.635Z,1513236699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:40.005Z,1513236700.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:40.020Z,1513236700.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:40.402Z,1513236700.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:40.422Z,1513236700.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:40.817Z,1513236700.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:40.835Z,1513236700.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:41.185Z,1513236701.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:41.215Z,1513236701.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:41.583Z,1513236701.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:41.599Z,1513236701.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:41.987Z,1513236701.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:42.001Z,1513236702.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:42.378Z,1513236702.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:42.393Z,1513236702.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:42.787Z,1513236702.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:42.802Z,1513236702.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:43.188Z,1513236703.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:43.215Z,1513236703.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:43.598Z,1513236703.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:43.619Z,1513236703.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:43.972Z,1513236703.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:43.999Z,1513236703.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:44.371Z,1513236704.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:44.408Z,1513236704.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:44.791Z,1513236704.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:44.811Z,1513236704.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:45.190Z,1513236705.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:45.218Z,1513236705.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:45.583Z,1513236705.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:45.626Z,1513236705.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:45.992Z,1513236705.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:46.025Z,1513236706.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:46.394Z,1513236706.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:46.408Z,1513236706.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:46.787Z,1513236706.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:46.875Z,1513236706.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:47.187Z,1513236707.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:47.202Z,1513236707.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:47.586Z,1513236707.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:47.601Z,1513236707.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:47.986Z,1513236707.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:48.002Z,1513236708.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:48.387Z,1513236708.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:48.408Z,1513236708.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:48.790Z,1513236708.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:48.811Z,1513236708.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:49.194Z,1513236709.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:49.211Z,1513236709.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:49.594Z,1513236709.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:49.617Z,1513236709.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:49.999Z,1513236709.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:50.035Z,1513236710.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:50.371Z,1513236710.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:50.407Z,1513236710.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:50.771Z,1513236710.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:50.824Z,1513236710.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:51.179Z,1513236711.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:51.204Z,1513236711.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:51.577Z,1513236711.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:51.607Z,1513236711.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:52.004Z,1513236712.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:52.019Z,1513236712.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:52.399Z,1513236712.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:52.414Z,1513236712.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:52.810Z,1513236712.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:52.831Z,1513236712.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:53.209Z,1513236713.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:53.232Z,1513236713.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:53.583Z,1513236713.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:53.615Z,1513236713.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:53.983Z,1513236713.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:53.998Z,1513236713.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:54.378Z,1513236714.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:54.405Z,1513236714.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:54.790Z,1513236714.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:54.811Z,1513236714.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:55.190Z,1513236715.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:55.205Z,1513236715.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:55.595Z,1513236715.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:55.610Z,1513236715.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:55.986Z,1513236715.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:56.007Z,1513236716.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:56.402Z,1513236716.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:56.438Z,1513236716.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:56.775Z,1513236716.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:56.811Z,1513236716.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:57.186Z,1513236717.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:57.208Z,1513236717.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:57.582Z,1513236717.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:57.682Z,1513236717.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:57.987Z,1513236717.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:58.013Z,1513236718.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:58.390Z,1513236718.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:58.461Z,1513236718.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:58.793Z,1513236718.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:58.819Z,1513236718.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:59.176Z,1513236719.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:59.239Z,1513236719.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:59.599Z,1513236719.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:31:59.639Z,1513236719.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:31:59.977Z,1513236719.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:00.004Z,1513236720.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:00.395Z,1513236720.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:00.410Z,1513236720.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:00.794Z,1513236720.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:00.809Z,1513236720.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:01.191Z,1513236721.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:01.213Z,1513236721.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:01.595Z,1513236721.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:01.610Z,1513236721.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:01.971Z,1513236721.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:02.030Z,1513236722.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:02.377Z,1513236722.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:02.405Z,1513236722.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:02.794Z,1513236722.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:02.821Z,1513236722.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:03.200Z,1513236723.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:03.219Z,1513236723.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:03.587Z,1513236723.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:03.609Z,1513236723.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:03.995Z,1513236723.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:04.010Z,1513236724.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:04.400Z,1513236724.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:04.419Z,1513236724.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:04.810Z,1513236724.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:04.831Z,1513236724.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:05.180Z,1513236725.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:05.206Z,1513236725.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:05.598Z,1513236725.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:05.612Z,1513236725.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:05.986Z,1513236725.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:06.009Z,1513236726.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:06.381Z,1513236726.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:06.412Z,1513236726.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:06.793Z,1513236726.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:06.819Z,1513236726.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:07.208Z,1513236727.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:07.223Z,1513236727.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:07.611Z,1513236727.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:07.659Z,1513236727.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:07.978Z,1513236727.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:07.993Z,1513236727.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:08.381Z,1513236728.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:08.397Z,1513236728.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:08.785Z,1513236728.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:08.820Z,1513236728.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:09.214Z,1513236729.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:09.247Z,1513236729.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:09.582Z,1513236729.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:09.597Z,1513236729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:09.992Z,1513236729.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:10.023Z,1513236730.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:10.387Z,1513236730.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:10.403Z,1513236730.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:10.796Z,1513236730.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:10.824Z,1513236730.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:11.182Z,1513236731.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:11.196Z,1513236731.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:11.591Z,1513236731.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:11.606Z,1513236731.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:12.022Z,1513236732.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:12.037Z,1513236732.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:12.406Z,1513236732.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:12.436Z,1513236732.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:12.786Z,1513236732.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:12.812Z,1513236732.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:13.189Z,1513236733.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:13.204Z,1513236733.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:13.593Z,1513236733.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:13.607Z,1513236733.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:13.988Z,1513236733.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:14.003Z,1513236734.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:14.383Z,1513236734.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:14.397Z,1513236734.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:14.785Z,1513236734.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:14.801Z,1513236734.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:15.192Z,1513236735.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:15.207Z,1513236735.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:15.609Z,1513236735.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:15.636Z,1513236735.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:15.991Z,1513236735.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:16.011Z,1513236736.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:16.395Z,1513236736.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:16.436Z,1513236736.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:16.796Z,1513236736.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:16.819Z,1513236736.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:17.189Z,1513236737.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:17.205Z,1513236737.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:17.592Z,1513236737.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:17.608Z,1513236737.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:17.986Z,1513236737.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:18.014Z,1513236738.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:18.390Z,1513236738.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:18.408Z,1513236738.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:18.796Z,1513236738.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:18.824Z,1513236738.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:19.210Z,1513236739.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:19.231Z,1513236739.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:19.606Z,1513236739.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:19.663Z,1513236739.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:19.979Z,1513236739.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:20.039Z,1513236740.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:20.383Z,1513236740.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:20.416Z,1513236740.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:20.781Z,1513236740.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:20.828Z,1513236740.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:21.210Z,1513236741.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:21.231Z,1513236741.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:21.578Z,1513236741.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:21.631Z,1513236741.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:22.035Z,1513236742.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:22.087Z,1513236742.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:22.404Z,1513236742.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:22.420Z,1513236742.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:22.794Z,1513236742.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:22.815Z,1513236742.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:23.183Z,1513236743.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:23.209Z,1513236743.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:23.584Z,1513236743.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:23.598Z,1513236743.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:23.983Z,1513236743.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:24.003Z,1513236744.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:24.378Z,1513236744.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:24.397Z,1513236744.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:24.791Z,1513236744.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:24.828Z,1513236744.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:25.203Z,1513236745.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:25.234Z,1513236745.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:25.595Z,1513236745.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:25.615Z,1513236745.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:26.007Z,1513236746.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:26.027Z,1513236746.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:26.375Z,1513236746.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:26.412Z,1513236746.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:26.776Z,1513236746.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:26.815Z,1513236746.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:27.183Z,1513236747.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:27.203Z,1513236747.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:27.590Z,1513236747.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:27.619Z,1513236747.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:27.992Z,1513236747.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:28.016Z,1513236748.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:28.418Z,1513236748.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:28.443Z,1513236748.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:28.786Z,1513236748.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:28.807Z,1513236748.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:29.188Z,1513236749.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:29.203Z,1513236749.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:29.588Z,1513236749.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:29.611Z,1513236749.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:29.991Z,1513236749.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:30.040Z,1513236750.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:33.709Z,1513236753.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:33.735Z,1513236753.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:33.846Z,1513236753.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:33.880Z,1513236753.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:34.206Z,1513236754.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:34.238Z,1513236754.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:34.611Z,1513236754.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:34.642Z,1513236754.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:34.996Z,1513236754.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:35.035Z,1513236755.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:35.398Z,1513236755.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:35.413Z,1513236755.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:35.793Z,1513236755.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:35.808Z,1513236755.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:36.190Z,1513236756.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:36.214Z,1513236756.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:36.660Z,1513236756.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:36.690Z,1513236756.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:37.005Z,1513236757.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:37.022Z,1513236757.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:37.402Z,1513236757.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:37.424Z,1513236757.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:37.806Z,1513236757.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:37.828Z,1513236757.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:38.195Z,1513236758.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:38.215Z,1513236758.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:38.596Z,1513236758.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:38.611Z,1513236758.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:38.986Z,1513236758.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:39.019Z,1513236759.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:39.396Z,1513236759.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:39.415Z,1513236759.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:39.806Z,1513236759.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:39.827Z,1513236759.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:40.206Z,1513236760.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:40.227Z,1513236760.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:40.610Z,1513236760.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:40.631Z,1513236760.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:40.983Z,1513236760.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:41.010Z,1513236761.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:41.383Z,1513236761.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:41.408Z,1513236761.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:41.800Z,1513236761.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:41.898Z,1513236761.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:42.189Z,1513236762.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:42.212Z,1513236762.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:42.605Z,1513236762.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:42.646Z,1513236762.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:42.999Z,1513236762.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:43.050Z,1513236763.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:43.398Z,1513236763.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:43.412Z,1513236763.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:43.797Z,1513236763.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:43.847Z,1513236763.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:44.210Z,1513236764.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:44.249Z,1513236764.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:44.614Z,1513236764.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:44.631Z,1513236764.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:44.984Z,1513236764.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:45.010Z,1513236765.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:45.385Z,1513236765.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:45.416Z,1513236765.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:45.802Z,1513236765.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:45.822Z,1513236765.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:46.205Z,1513236766.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:46.220Z,1513236766.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:46.618Z,1513236766.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:46.632Z,1513236766.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:46.988Z,1513236766.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:47.008Z,1513236767.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:47.428Z,1513236767.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:47.463Z,1513236767.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:47.799Z,1513236767.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:47.830Z,1513236767.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:48.274Z,1513236768.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:48.289Z,1513236768.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:48.607Z,1513236768.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:48.640Z,1513236768.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:49.015Z,1513236769.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:49.030Z,1513236769.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:49.398Z,1513236769.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:49.420Z,1513236769.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:49.801Z,1513236769.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:49.833Z,1513236769.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:50.191Z,1513236770.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:50.207Z,1513236770.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:50.659Z,1513236770.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:50.711Z,1513236770.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:50.992Z,1513236770.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:51.007Z,1513236771.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:51.393Z,1513236771.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:51.408Z,1513236771.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:51.798Z,1513236771.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:51.813Z,1513236771.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:52.198Z,1513236772.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:52.238Z,1513236772.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:52.607Z,1513236772.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:52.640Z,1513236772.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:52.990Z,1513236772.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:53.039Z,1513236773.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:53.395Z,1513236773.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:53.410Z,1513236773.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:53.790Z,1513236773.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:53.821Z,1513236773.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:54.194Z,1513236774.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:54.209Z,1513236774.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:54.594Z,1513236774.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:54.608Z,1513236774.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:55.003Z,1513236775.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:55.018Z,1513236775.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:55.402Z,1513236775.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:55.416Z,1513236775.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:55.801Z,1513236775.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:55.823Z,1513236775.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:56.177Z,1513236776.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:56.200Z,1513236776.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:56.611Z,1513236776.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:56.631Z,1513236776.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:57.030Z,1513236777.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:57.077Z,1513236777.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:57.383Z,1513236777.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:57.423Z,1513236777.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:57.810Z,1513236777.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:57.824Z,1513236777.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:58.212Z,1513236778.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:58.226Z,1513236778.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:58.626Z,1513236778.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:58.647Z,1513236778.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:58.995Z,1513236778.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:59.019Z,1513236779.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:59.391Z,1513236779.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:59.424Z,1513236779.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:32:59.787Z,1513236779.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:32:59.829Z,1513236779.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:00.199Z,1513236780.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:00.239Z,1513236780.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:00.600Z,1513236780.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:00.639Z,1513236780.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:01.013Z,1513236781.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:01.028Z,1513236781.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:01.402Z,1513236781.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:01.424Z,1513236781.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:01.802Z,1513236781.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:01.831Z,1513236781.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:02.193Z,1513236782.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:02.228Z,1513236782.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:02.601Z,1513236782.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:02.642Z,1513236782.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:02.991Z,1513236782.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:03.027Z,1513236783.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:03.424Z,1513236783.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:03.463Z,1513236783.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:03.814Z,1513236783.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:03.868Z,1513236783.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:04.202Z,1513236784.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:04.260Z,1513236784.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:04.677Z,1513236784.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:04.702Z,1513236784.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:05.002Z,1513236785.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:05.051Z,1513236785.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:05.392Z,1513236785.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:05.411Z,1513236785.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:05.797Z,1513236785.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:05.843Z,1513236785.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:06.194Z,1513236786.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:06.211Z,1513236786.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:06.589Z,1513236786.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:06.614Z,1513236786.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:07.006Z,1513236787.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:07.022Z,1513236787.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:07.405Z,1513236787.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:07.427Z,1513236787.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:07.806Z,1513236787.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:07.820Z,1513236787.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:08.183Z,1513236788.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:08.198Z,1513236788.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:08.588Z,1513236788.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:08.603Z,1513236788.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:08.988Z,1513236788.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:09.007Z,1513236789.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:09.390Z,1513236789.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:09.404Z,1513236789.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:09.805Z,1513236789.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:09.830Z,1513236789.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:10.223Z,1513236790.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:10.251Z,1513236790.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:10.626Z,1513236790.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:10.640Z,1513236790.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:10.995Z,1513236790.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:11.009Z,1513236791.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:11.391Z,1513236791.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:11.406Z,1513236791.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:11.790Z,1513236791.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:11.817Z,1513236791.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:12.191Z,1513236792.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:12.213Z,1513236792.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:12.613Z,1513236792.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:12.632Z,1513236792.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:13.007Z,1513236793.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:13.027Z,1513236793.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:13.430Z,1513236793.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:13.455Z,1513236793.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:13.802Z,1513236793.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:13.823Z,1513236793.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:14.180Z,1513236794.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:14.228Z,1513236794.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:14.617Z,1513236794.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:14.632Z,1513236794.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:14.997Z,1513236794.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:15.023Z,1513236795.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:15.383Z,1513236795.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:15.418Z,1513236795.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:15.806Z,1513236795.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:15.822Z,1513236795.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:16.209Z,1513236796.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:16.224Z,1513236796.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:16.642Z,1513236796.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:16.676Z,1513236796.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:16.984Z,1513236796.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:17.015Z,1513236797.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:17.383Z,1513236797.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:17.420Z,1513236797.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:17.783Z,1513236797.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:17.815Z,1513236797.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:18.184Z,1513236798.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:18.214Z,1513236798.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:18.665Z,1513236798.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:18.709Z,1513236798.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:19.011Z,1513236799.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:19.026Z,1513236799.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:19.410Z,1513236799.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:19.425Z,1513236799.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:19.815Z,1513236799.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:19.867Z,1513236799.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:20.183Z,1513236800.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:20.222Z,1513236800.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:20.587Z,1513236800.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:20.612Z,1513236800.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:21.008Z,1513236801.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:21.027Z,1513236801.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:21.384Z,1513236801.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:21.423Z,1513236801.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:21.806Z,1513236801.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:21.827Z,1513236801.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:22.202Z,1513236802.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:22.225Z,1513236802.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:22.610Z,1513236802.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:22.625Z,1513236802.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:23.010Z,1513236803.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:23.063Z,1513236803.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:23.393Z,1513236803.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:23.415Z,1513236803.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:23.801Z,1513236803.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:23.816Z,1513236803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:24.188Z,1513236804.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:24.219Z,1513236804.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:24.606Z,1513236804.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:24.630Z,1513236804.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:25.006Z,1513236805.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:25.022Z,1513236805.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:25.408Z,1513236805.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:25.427Z,1513236805.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:25.806Z,1513236805.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:25.874Z,1513236805.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:26.239Z,1513236806.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:26.309Z,1513236806.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:26.598Z,1513236806.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:26.636Z,1513236806.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:26.992Z,1513236806.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:27.022Z,1513236807.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:27.383Z,1513236807.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:27.427Z,1513236807.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:27.797Z,1513236807.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:27.823Z,1513236807.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:28.197Z,1513236808.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:28.258Z,1513236808.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:28.623Z,1513236808.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:28.638Z,1513236808.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:28.987Z,1513236808.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:29.010Z,1513236809.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:29.392Z,1513236809.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:29.443Z,1513236809.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:29.788Z,1513236809.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:29.828Z,1513236809.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:30.192Z,1513236810.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:30.223Z,1513236810.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:33.643Z,1513236813.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:33.680Z,1513236813.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:33.778Z,1513236813.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:33.825Z,1513236813.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:34.153Z,1513236814.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:34.186Z,1513236814.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:34.553Z,1513236814.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:34.577Z,1513236814.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:34.947Z,1513236814.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:34.995Z,1513236814.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:35.333Z,1513236815.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:35.347Z,1513236815.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:35.772Z,1513236815.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:35.787Z,1513236815.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:36.142Z,1513236816.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:36.156Z,1513236816.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:36.550Z,1513236816.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:36.603Z,1513236816.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:36.950Z,1513236816.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:36.998Z,1513236816.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:37.340Z,1513236817.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:37.355Z,1513236817.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:37.746Z,1513236817.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:37.762Z,1513236817.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:38.149Z,1513236818.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:38.167Z,1513236818.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:38.612Z,1513236818.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:38.627Z,1513236818.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:38.932Z,1513236818.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:38.000Z,1513236819.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:39.327Z,1513236819.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:39.356Z,1513236819.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:39.722Z,1513236819.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:39.749Z,1513236819.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:40.128Z,1513236820.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:40.159Z,1513236820.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:40.607Z,1513236820.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:40.630Z,1513236820.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:40.948Z,1513236820.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:40.973Z,1513236820.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:41.351Z,1513236821.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:41.367Z,1513236821.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:41.754Z,1513236821.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:41.768Z,1513236821.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:42.138Z,1513236822.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:42.178Z,1513236822.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:42.598Z,1513236822.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:42.625Z,1513236822.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:42.932Z,1513236822.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:42.961Z,1513236822.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:43.328Z,1513236823.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:43.366Z,1513236823.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:43.752Z,1513236823.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:43.767Z,1513236823.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:44.157Z,1513236824.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:44.179Z,1513236824.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:44.605Z,1513236824.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:44.628Z,1513236824.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:44.932Z,1513236824.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:44.973Z,1513236824.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:45.369Z,1513236825.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:45.430Z,1513236825.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:45.735Z,1513236825.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:45.750Z,1513236825.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:46.136Z,1513236826.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:46.151Z,1513236826.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:46.537Z,1513236826.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:46.552Z,1513236826.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:46.953Z,1513236826.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:46.976Z,1513236826.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:47.347Z,1513236827.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:47.371Z,1513236827.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:47.742Z,1513236827.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:47.825Z,1513236827.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:48.135Z,1513236828.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:48.162Z,1513236828.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:48.546Z,1513236828.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:48.643Z,1513236828.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:48.968Z,1513236828.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:48.986Z,1513236828.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:49.335Z,1513236829.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:49.371Z,1513236829.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:49.746Z,1513236829.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:49.817Z,1513236829.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:50.146Z,1513236830.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:50.170Z,1513236830.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:50.546Z,1513236830.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:50.599Z,1513236830.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:50.946Z,1513236830.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:50.990Z,1513236830.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:51.328Z,1513236831.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:51.342Z,1513236831.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:51.743Z,1513236831.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:51.790Z,1513236831.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:52.150Z,1513236832.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:52.178Z,1513236832.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:52.604Z,1513236832.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:52.627Z,1513236832.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:52.961Z,1513236832.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:52.980Z,1513236832.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:53.328Z,1513236833.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:53.368Z,1513236833.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:53.732Z,1513236833.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:53.759Z,1513236833.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:54.132Z,1513236834.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:54.162Z,1513236834.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:54.600Z,1513236834.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:54.630Z,1513236834.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:54.967Z,1513236834.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:55.002Z,1513236835.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:55.342Z,1513236835.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:55.371Z,1513236835.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:55.746Z,1513236835.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:55.771Z,1513236835.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:56.133Z,1513236836.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:56.147Z,1513236836.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:56.590Z,1513236836.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:56.626Z,1513236836.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:56.936Z,1513236836.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:56.951Z,1513236836.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:57.337Z,1513236837.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:57.351Z,1513236837.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:57.738Z,1513236837.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:57.753Z,1513236837.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:58.173Z,1513236838.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:58.192Z,1513236838.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:58.598Z,1513236838.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:58.636Z,1513236838.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:58.931Z,1513236838.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:58.959Z,1513236838.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:59.327Z,1513236839.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:59.359Z,1513236839.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:33:59.728Z,1513236839.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:33:59.765Z,1513236839.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:00.129Z,1513236840.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:00.160Z,1513236840.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:00.531Z,1513236840.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:00.621Z,1513236840.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:00.947Z,1513236840.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:00.976Z,1513236840.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:01.356Z,1513236841.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:01.383Z,1513236841.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:01.738Z,1513236841.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:01.755Z,1513236841.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:02.137Z,1513236842.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:02.152Z,1513236842.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:02.536Z,1513236842.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:02.555Z,1513236842.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:02.946Z,1513236842.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:02.995Z,1513236842.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:03.337Z,1513236843.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:03.351Z,1513236843.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:03.738Z,1513236843.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:03.753Z,1513236843.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:04.158Z,1513236844.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:04.187Z,1513236844.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:04.583Z,1513236844.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:04.635Z,1513236844.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:04.944Z,1513236844.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:04.988Z,1513236844.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:05.331Z,1513236845.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:05.352Z,1513236845.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:05.737Z,1513236845.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:05.752Z,1513236845.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:06.142Z,1513236846.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:06.163Z,1513236846.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:06.582Z,1513236846.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:06.626Z,1513236846.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:06.957Z,1513236846.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:06.972Z,1513236846.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:07.354Z,1513236847.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:07.370Z,1513236847.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:07.741Z,1513236847.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:07.782Z,1513236847.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:08.131Z,1513236848.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:08.159Z,1513236848.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:08.586Z,1513236848.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:08.605Z,1513236848.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:08.939Z,1513236848.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:08.966Z,1513236848.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:09.341Z,1513236849.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:09.356Z,1513236849.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:09.751Z,1513236849.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:09.792Z,1513236849.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:10.145Z,1513236850.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:10.168Z,1513236850.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:10.598Z,1513236850.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:10.670Z,1513236850.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:10.999Z,1513236850.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:11.067Z,1513236851.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:11.351Z,1513236851.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:11.367Z,1513236851.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:11.727Z,1513236851.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:11.767Z,1513236851.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:12.132Z,1513236852.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:12.166Z,1513236852.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:12.584Z,1513236852.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:12.632Z,1513236852.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:12.956Z,1513236852.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:12.970Z,1513236852.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:13.342Z,1513236853.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:13.364Z,1513236853.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:13.738Z,1513236853.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:13.773Z,1513236853.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:14.135Z,1513236854.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:14.231Z,1513236854.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:14.529Z,1513236854.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:14.544Z,1513236854.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:14.936Z,1513236854.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:14.954Z,1513236854.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:15.341Z,1513236855.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:15.356Z,1513236855.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:15.741Z,1513236855.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:15.755Z,1513236855.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:16.146Z,1513236856.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:16.160Z,1513236856.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:16.541Z,1513236856.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:16.564Z,1513236856.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:16.940Z,1513236856.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:16.959Z,1513236856.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:17.365Z,1513236857.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:17.401Z,1513236857.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:17.750Z,1513236857.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:17.767Z,1513236857.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:18.144Z,1513236858.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:18.167Z,1513236858.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:18.551Z,1513236858.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:18.565Z,1513236858.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:18.939Z,1513236858.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:18.962Z,1513236858.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:19.341Z,1513236859.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:19.356Z,1513236859.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:19.750Z,1513236859.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:19.767Z,1513236859.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:20.154Z,1513236860.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:20.168Z,1513236860.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:20.611Z,1513236860.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:20.658Z,1513236860.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:20.927Z,1513236860.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:20.996Z,1513236860.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:21.331Z,1513236861.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:21.359Z,1513236861.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:21.731Z,1513236861.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:21.763Z,1513236861.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:22.129Z,1513236862.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:22.156Z,1513236862.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:22.568Z,1513236862.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:22.622Z,1513236862.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:22.954Z,1513236862.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:22.975Z,1513236862.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:23.354Z,1513236863.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:23.370Z,1513236863.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:23.751Z,1513236863.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:23.766Z,1513236863.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:24.133Z,1513236864.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:24.156Z,1513236864.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:24.594Z,1513236864.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:24.624Z,1513236864.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:24.937Z,1513236864.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:24.952Z,1513236864.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:25.335Z,1513236865.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:25.359Z,1513236865.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:25.749Z,1513236865.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:25.765Z,1513236865.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:26.146Z,1513236866.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:26.162Z,1513236866.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:26.592Z,1513236866.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:26.628Z,1513236866.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:26.628Z,1513236866.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141
2017-12-14T07:34:26.628Z,1513236866.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:34:26.638Z,1513236866.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:26.638Z,1513236866.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 141
2017-12-14T07:34:26.638Z,1513236866.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:34:26.640Z,1513236866.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:26.640Z,1513236866.640 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2017-12-14T07:34:26.640Z,1513236866.640 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:34:26.669Z,1513236866.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:34:26.669Z,1513236866.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:34:26.670Z,1513236866.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:34:27.012Z,1513236867.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:27.068Z,1513236867.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:34:27.068Z,1513236867.068 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141
2017-12-14T07:34:27.068Z,1513236867.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:34:27.073Z,1513236867.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 141
2017-12-14T07:34:27.073Z,1513236867.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:34:27.073Z,1513236867.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2017-12-14T07:34:27.327Z,1513236867.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:27.352Z,1513236867.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:34:27.352Z,1513236867.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:34:27.353Z,1513236867.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:34:27.353Z,1513236867.353 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:34:27.354Z,1513236867.354 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:34:27.354Z,1513236867.354 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:34:27.354Z,1513236867.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:34:27.355Z,1513236867.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:34:27.355Z,1513236867.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:34:27.727Z,1513236867.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:27.759Z,1513236867.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:28.131Z,1513236868.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:28.162Z,1513236868.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:28.532Z,1513236868.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:28.584Z,1513236868.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:28.943Z,1513236868.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:28.958Z,1513236868.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:29.344Z,1513236869.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:29.360Z,1513236869.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:29.745Z,1513236869.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:29.760Z,1513236869.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:30.140Z,1513236870.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:30.155Z,1513236870.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:30.546Z,1513236870.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:30.560Z,1513236870.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:34.003Z,1513236874.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:34.089Z,1513236874.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:34.174Z,1513236874.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:34.207Z,1513236874.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:34.595Z,1513236874.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:34.654Z,1513236874.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:34.956Z,1513236874.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:34.973Z,1513236874.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:35.355Z,1513236875.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:35.410Z,1513236875.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:35.752Z,1513236875.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:35.767Z,1513236875.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:36.146Z,1513236876.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:36.161Z,1513236876.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:36.601Z,1513236876.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:36.648Z,1513236876.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:36.970Z,1513236876.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:36.991Z,1513236876.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:37.353Z,1513236877.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:37.383Z,1513236877.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:37.742Z,1513236877.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:37.756Z,1513236877.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:38.143Z,1513236878.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:38.183Z,1513236878.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:38.598Z,1513236878.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:38.616Z,1513236878.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:38.941Z,1513236878.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:38.957Z,1513236878.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:39.344Z,1513236879.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:39.363Z,1513236879.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:39.757Z,1513236879.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:39.772Z,1513236879.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:40.149Z,1513236880.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:40.181Z,1513236880.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:40.587Z,1513236880.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:40.624Z,1513236880.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:40.947Z,1513236880.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:40.964Z,1513236880.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:41.346Z,1513236881.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:41.362Z,1513236881.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:41.746Z,1513236881.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:41.768Z,1513236881.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:42.146Z,1513236882.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:42.161Z,1513236882.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:42.564Z,1513236882.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:42.650Z,1513236882.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:42.950Z,1513236882.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:42.967Z,1513236882.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:43.360Z,1513236883.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:43.379Z,1513236883.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:43.741Z,1513236883.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:43.801Z,1513236883.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:44.156Z,1513236884.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:44.172Z,1513236884.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:44.535Z,1513236884.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:44.562Z,1513236884.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:44.937Z,1513236884.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:44.984Z,1513236884.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:45.336Z,1513236885.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:45.371Z,1513236885.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:45.754Z,1513236885.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:45.785Z,1513236885.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:46.145Z,1513236886.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:46.215Z,1513236886.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:46.557Z,1513236886.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:46.587Z,1513236886.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:46.941Z,1513236886.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:46.960Z,1513236886.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:47.350Z,1513236887.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:47.364Z,1513236887.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:47.757Z,1513236887.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:47.790Z,1513236887.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:48.158Z,1513236888.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:48.192Z,1513236888.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:48.606Z,1513236888.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:48.635Z,1513236888.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:48.940Z,1513236888.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:48.955Z,1513236888.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:49.374Z,1513236889.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:49.439Z,1513236889.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:49.742Z,1513236889.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:49.757Z,1513236889.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:50.146Z,1513236890.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:50.161Z,1513236890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:50.602Z,1513236890.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:50.643Z,1513236890.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:50.946Z,1513236890.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:50.963Z,1513236890.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:51.350Z,1513236891.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:51.389Z,1513236891.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:51.763Z,1513236891.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:51.894Z,1513236891.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:52.147Z,1513236892.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:52.163Z,1513236892.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:52.606Z,1513236892.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:52.651Z,1513236892.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:52.953Z,1513236892.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:52.972Z,1513236892.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:53.343Z,1513236893.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:53.358Z,1513236893.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:53.753Z,1513236893.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:53.775Z,1513236893.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:54.154Z,1513236894.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:54.175Z,1513236894.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:54.598Z,1513236894.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:54.623Z,1513236894.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:54.948Z,1513236894.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:54.965Z,1513236894.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:55.344Z,1513236895.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:55.360Z,1513236895.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:55.739Z,1513236895.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:55.827Z,1513236895.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:56.135Z,1513236896.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:56.171Z,1513236896.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:56.614Z,1513236896.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:56.667Z,1513236896.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:56.961Z,1513236896.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:56.983Z,1513236896.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:57.358Z,1513236897.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:57.414Z,1513236897.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:57.760Z,1513236897.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:57.775Z,1513236897.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:58.130Z,1513236898.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:58.167Z,1513236898.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:58.539Z,1513236898.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:58.564Z,1513236898.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:58.938Z,1513236898.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:58.975Z,1513236898.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:59.341Z,1513236899.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:59.371Z,1513236899.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:34:59.747Z,1513236899.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:34:59.779Z,1513236899.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:00.165Z,1513236900.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:00.180Z,1513236900.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:00.559Z,1513236900.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:00.580Z,1513236900.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:00.937Z,1513236900.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:00.985Z,1513236900.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:01.339Z,1513236901.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:01.373Z,1513236901.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:01.746Z,1513236901.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:01.796Z,1513236901.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:02.171Z,1513236902.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:02.242Z,1513236902.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:02.595Z,1513236902.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:02.619Z,1513236902.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:02.936Z,1513236902.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:02.958Z,1513236902.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:03.345Z,1513236903.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:03.367Z,1513236903.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:03.749Z,1513236903.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:03.763Z,1513236903.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:04.150Z,1513236904.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:04.164Z,1513236904.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:04.589Z,1513236904.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:04.604Z,1513236904.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:04.951Z,1513236904.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:04.971Z,1513236904.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:05.370Z,1513236905.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:05.400Z,1513236905.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:05.752Z,1513236905.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:05.796Z,1513236905.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:06.149Z,1513236906.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:06.167Z,1513236906.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:06.598Z,1513236906.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:06.624Z,1513236906.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:06.946Z,1513236906.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:07.012Z,1513236907.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:07.342Z,1513236907.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:07.378Z,1513236907.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:07.757Z,1513236907.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:07.774Z,1513236907.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:08.157Z,1513236908.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:08.171Z,1513236908.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:08.624Z,1513236908.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:08.669Z,1513236908.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:08.936Z,1513236908.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:08.963Z,1513236908.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:09.336Z,1513236909.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:09.371Z,1513236909.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:09.739Z,1513236909.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:09.767Z,1513236909.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:10.140Z,1513236910.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:10.165Z,1513236910.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:10.534Z,1513236910.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:10.624Z,1513236910.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:10.950Z,1513236910.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:10.964Z,1513236910.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:11.357Z,1513236911.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:11.372Z,1513236911.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:11.749Z,1513236911.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:11.763Z,1513236911.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:12.135Z,1513236912.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:12.167Z,1513236912.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:12.539Z,1513236912.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:12.564Z,1513236912.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:12.937Z,1513236912.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:12.964Z,1513236912.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:13.339Z,1513236913.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:13.367Z,1513236913.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:13.758Z,1513236913.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:13.773Z,1513236913.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:14.156Z,1513236914.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:14.177Z,1513236914.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:14.565Z,1513236914.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:14.580Z,1513236914.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:14.971Z,1513236914.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:14.990Z,1513236914.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:15.335Z,1513236915.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:15.366Z,1513236915.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:15.762Z,1513236915.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:15.782Z,1513236915.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:16.163Z,1513236916.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:16.178Z,1513236916.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:16.595Z,1513236916.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:16.635Z,1513236916.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:16.964Z,1513236916.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:16.990Z,1513236916.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:17.340Z,1513236917.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:17.359Z,1513236917.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:17.745Z,1513236917.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:17.804Z,1513236917.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:18.161Z,1513236918.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:18.255Z,1513236918.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:18.569Z,1513236918.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:18.617Z,1513236918.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:18.954Z,1513236918.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:18.981Z,1513236918.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:19.366Z,1513236919.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:19.426Z,1513236919.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:19.746Z,1513236919.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:19.772Z,1513236919.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:20.143Z,1513236920.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:20.191Z,1513236920.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:20.587Z,1513236920.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:20.614Z,1513236920.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:20.943Z,1513236920.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:20.966Z,1513236920.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:21.347Z,1513236921.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:21.415Z,1513236921.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:21.758Z,1513236921.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:21.773Z,1513236921.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:22.156Z,1513236922.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:22.175Z,1513236922.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:22.598Z,1513236922.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:22.619Z,1513236922.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:22.946Z,1513236922.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:22.961Z,1513236922.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:23.345Z,1513236923.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:23.360Z,1513236923.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:23.742Z,1513236923.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:23.757Z,1513236923.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:24.144Z,1513236924.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:24.188Z,1513236924.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:24.634Z,1513236924.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:24.678Z,1513236924.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:24.956Z,1513236924.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:24.970Z,1513236924.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:25.360Z,1513236925.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:25.375Z,1513236925.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:25.760Z,1513236925.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:25.775Z,1513236925.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:26.135Z,1513236926.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:26.171Z,1513236926.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:26.533Z,1513236926.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:26.548Z,1513236926.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:26.939Z,1513236926.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:26.975Z,1513236926.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:27.335Z,1513236927.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:27.371Z,1513236927.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:27.754Z,1513236927.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:27.782Z,1513236927.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:28.151Z,1513236928.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:28.179Z,1513236928.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:28.555Z,1513236928.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:28.604Z,1513236928.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:28.941Z,1513236928.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:28.985Z,1513236928.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:29.341Z,1513236929.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:29.360Z,1513236929.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:29.753Z,1513236929.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:29.784Z,1513236929.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:30.157Z,1513236930.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:30.191Z,1513236930.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:30.596Z,1513236930.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:30.616Z,1513236930.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:33.938Z,1513236933.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:33.966Z,1513236933.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:34.058Z,1513236934.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:34.074Z,1513236934.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:34.457Z,1513236934.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:34.479Z,1513236934.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:34.875Z,1513236934.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:34.895Z,1513236934.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:35.269Z,1513236935.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:35.284Z,1513236935.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:35.647Z,1513236935.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:35.683Z,1513236935.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:36.052Z,1513236936.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:36.091Z,1513236936.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:36.448Z,1513236936.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:36.464Z,1513236936.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:36.874Z,1513236936.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:36.905Z,1513236936.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:37.272Z,1513236937.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:37.311Z,1513236937.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:37.670Z,1513236937.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:37.703Z,1513236937.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:38.059Z,1513236938.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:38.074Z,1513236938.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:38.448Z,1513236938.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:38.462Z,1513236938.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:38.858Z,1513236938.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:38.873Z,1513236938.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:39.256Z,1513236939.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:39.270Z,1513236939.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:39.657Z,1513236939.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:39.679Z,1513236939.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:40.066Z,1513236940.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:40.102Z,1513236940.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:40.493Z,1513236940.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:40.588Z,1513236940.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:40.873Z,1513236940.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:40.981Z,1513236940.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:41.251Z,1513236941.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:41.282Z,1513236941.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:41.651Z,1513236941.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:41.703Z,1513236941.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:42.048Z,1513236942.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:42.086Z,1513236942.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:42.452Z,1513236942.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:42.506Z,1513236942.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:42.895Z,1513236942.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:42.951Z,1513236942.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:43.256Z,1513236943.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:43.270Z,1513236943.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:43.662Z,1513236943.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:43.706Z,1513236943.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:44.056Z,1513236944.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:44.075Z,1513236944.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:44.460Z,1513236944.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:44.474Z,1513236944.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:44.849Z,1513236944.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:44.883Z,1513236944.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:45.250Z,1513236945.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:45.283Z,1513236945.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:45.660Z,1513236945.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:45.674Z,1513236945.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:46.064Z,1513236946.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:46.083Z,1513236946.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:46.466Z,1513236946.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:46.480Z,1513236946.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:46.870Z,1513236946.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:46.917Z,1513236946.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:47.264Z,1513236947.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:47.289Z,1513236947.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:47.652Z,1513236947.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:47.684Z,1513236947.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:48.051Z,1513236948.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:48.066Z,1513236948.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:48.449Z,1513236948.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:48.463Z,1513236948.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:48.873Z,1513236948.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:48.899Z,1513236948.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:49.265Z,1513236949.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:49.279Z,1513236949.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:49.670Z,1513236949.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:49.700Z,1513236949.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:50.052Z,1513236950.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:50.079Z,1513236950.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:50.456Z,1513236950.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:50.470Z,1513236950.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:50.847Z,1513236950.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:50.917Z,1513236950.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:51.261Z,1513236951.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:51.276Z,1513236951.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:51.665Z,1513236951.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:51.679Z,1513236951.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:52.068Z,1513236952.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:52.083Z,1513236952.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:52.470Z,1513236952.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:52.491Z,1513236952.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:52.866Z,1513236952.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:52.888Z,1513236952.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:53.247Z,1513236953.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:53.279Z,1513236953.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:53.659Z,1513236953.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:53.687Z,1513236953.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:54.054Z,1513236954.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:54.081Z,1513236954.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:54.452Z,1513236954.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:54.478Z,1513236954.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:54.883Z,1513236954.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:54.945Z,1513236954.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:55.261Z,1513236955.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:55.293Z,1513236955.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:55.657Z,1513236955.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:55.688Z,1513236955.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:56.052Z,1513236956.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:56.067Z,1513236956.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:56.455Z,1513236956.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:56.469Z,1513236956.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:56.904Z,1513236956.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:56.943Z,1513236956.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:57.248Z,1513236957.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:57.288Z,1513236957.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:57.648Z,1513236957.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:57.662Z,1513236957.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:58.062Z,1513236958.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:58.096Z,1513236958.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:58.469Z,1513236958.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:58.544Z,1513236958.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:58.862Z,1513236958.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:58.879Z,1513236958.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:59.251Z,1513236959.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:59.275Z,1513236959.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:35:59.655Z,1513236959.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:35:59.671Z,1513236959.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:00.062Z,1513236960.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:00.077Z,1513236960.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:00.468Z,1513236960.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:00.484Z,1513236960.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:00.866Z,1513236960.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:00.893Z,1513236960.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:01.264Z,1513236961.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:01.299Z,1513236961.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:01.670Z,1513236961.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:01.695Z,1513236961.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:02.047Z,1513236962.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:02.083Z,1513236962.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:02.451Z,1513236962.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:02.483Z,1513236962.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:02.857Z,1513236962.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:02.931Z,1513236962.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:03.300Z,1513236963.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:03.336Z,1513236963.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:03.647Z,1513236963.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:03.684Z,1513236963.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:04.070Z,1513236964.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:04.128Z,1513236964.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:04.472Z,1513236964.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:04.487Z,1513236964.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:04.861Z,1513236964.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:04.899Z,1513236964.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:05.253Z,1513236965.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:05.267Z,1513236965.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:05.655Z,1513236965.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:05.675Z,1513236965.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:06.053Z,1513236966.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:06.067Z,1513236966.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:06.487Z,1513236966.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:06.510Z,1513236966.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:06.871Z,1513236966.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:06.886Z,1513236966.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:07.271Z,1513236967.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:07.285Z,1513236967.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:07.662Z,1513236967.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:07.692Z,1513236967.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:08.047Z,1513236968.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:08.082Z,1513236968.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:08.448Z,1513236968.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:08.474Z,1513236968.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:08.864Z,1513236968.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:08.936Z,1513236968.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:09.255Z,1513236969.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:09.270Z,1513236969.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:09.654Z,1513236969.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:09.668Z,1513236969.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:10.063Z,1513236970.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:10.083Z,1513236970.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:10.462Z,1513236970.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:10.478Z,1513236970.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:10.906Z,1513236970.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:10.955Z,1513236970.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:11.255Z,1513236971.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:11.289Z,1513236971.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:11.655Z,1513236971.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:11.690Z,1513236971.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:12.056Z,1513236972.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:12.093Z,1513236972.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:12.448Z,1513236972.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:12.464Z,1513236972.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:12.873Z,1513236972.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:12.907Z,1513236972.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:13.263Z,1513236973.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:13.323Z,1513236973.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:13.662Z,1513236973.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:13.677Z,1513236973.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:14.060Z,1513236974.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:14.079Z,1513236974.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:14.461Z,1513236974.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:14.476Z,1513236974.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:14.847Z,1513236974.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:14.883Z,1513236974.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:15.248Z,1513236975.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:15.284Z,1513236975.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:15.647Z,1513236975.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:15.684Z,1513236975.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:16.058Z,1513236976.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:16.123Z,1513236976.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:16.484Z,1513236976.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:16.558Z,1513236976.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:16.862Z,1513236976.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:16.894Z,1513236976.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:17.252Z,1513236977.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:17.292Z,1513236977.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:17.655Z,1513236977.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:17.691Z,1513236977.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:18.055Z,1513236978.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:18.092Z,1513236978.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:18.455Z,1513236978.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:18.488Z,1513236978.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:18.869Z,1513236978.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:18.905Z,1513236978.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:19.296Z,1513236979.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:19.361Z,1513236979.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:19.663Z,1513236979.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:19.679Z,1513236979.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:20.056Z,1513236980.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:20.079Z,1513236980.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:20.464Z,1513236980.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:20.524Z,1513236980.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:20.858Z,1513236980.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:20.895Z,1513236980.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:21.258Z,1513236981.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:21.306Z,1513236981.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:21.678Z,1513236981.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:21.707Z,1513236981.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:22.074Z,1513236982.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:22.103Z,1513236982.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:22.464Z,1513236982.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:22.498Z,1513236982.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:22.944Z,1513236982.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:23.016Z,1513236983.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:23.252Z,1513236983.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:23.303Z,1513236983.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:23.649Z,1513236983.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:23.672Z,1513236983.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:24.050Z,1513236984.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:24.110Z,1513236984.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:24.455Z,1513236984.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:24.503Z,1513236984.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:24.912Z,1513236984.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:25.010Z,1513236985.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:25.263Z,1513236985.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:25.352Z,1513236985.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:25.669Z,1513236985.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:25.739Z,1513236985.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:26.050Z,1513236986.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:26.093Z,1513236986.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:26.447Z,1513236986.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:26.495Z,1513236986.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:26.877Z,1513236986.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:26.915Z,1513236986.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:27.286Z,1513236987.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:27.339Z,1513236987.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:27.661Z,1513236987.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:27.676Z,1513236987.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:28.066Z,1513236988.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:28.104Z,1513236988.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:28.474Z,1513236988.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:28.489Z,1513236988.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:28.860Z,1513236988.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:28.888Z,1513236988.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:29.279Z,1513236989.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:29.303Z,1513236989.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:29.307Z,1513236989.307 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:31:29.3Z
2017-12-14T07:36:29.307Z,1513236989.307 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:36:29.307Z,1513236989.307 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:36:29.647Z,1513236989.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:29.690Z,1513236989.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:30.707Z,1513236990.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:30.758Z,1513236990.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:30.859Z,1513236990.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:30.902Z,1513236990.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:38.650Z,1513236998.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:38.711Z,1513236998.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:40.690Z,1513237000.690 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0164.lzma
2017-12-14T07:36:40.730Z,1513237000.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:40.773Z,1513237000.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:40.879Z,1513237000.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:40.929Z,1513237000.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:36:43.295Z,1513237003.295 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0164.lzma.bak
2017-12-14T07:36:43.295Z,1513237003.295 [DataOverHttps](INFO): SBD MOMSN=5438257
2017-12-14T07:36:43.354Z,1513237003.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:36:43.398Z,1513237003.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:05.232Z,1513237025.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:05.251Z,1513237025.251 [BPC1](ERROR): Failed to receive battery data
2017-12-14T07:37:05.251Z,1513237025.251 [BPC1] Communications Fault, FailCount= 1
2017-12-14T07:37:05.251Z,1513237025.251 [BPC1](ERROR): Communications Fault
2017-12-14T07:37:05.267Z,1513237025.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:05.298Z,1513237025.298 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T07:37:05.383Z,1513237025.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:05.423Z,1513237025.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:09.108Z,1513237029.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:09.124Z,1513237029.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:09.234Z,1513237029.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:09.260Z,1513237029.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:09.273Z,1513237029.273 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:37:09.273Z,1513237029.273 [BPC1] No Fault, FailCount= 1
2017-12-14T07:37:09.613Z,1513237029.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:09.682Z,1513237029.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:10.015Z,1513237030.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:10.029Z,1513237030.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:10.413Z,1513237030.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:10.436Z,1513237030.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:10.818Z,1513237030.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:10.833Z,1513237030.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:14.233Z,1513237034.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:14.269Z,1513237034.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:14.325Z,1513237034.325 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0165.lzma
2017-12-14T07:37:14.374Z,1513237034.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:14.403Z,1513237034.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:14.726Z,1513237034.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:14.779Z,1513237034.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:15.104Z,1513237035.104 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0165.lzma.bak
2017-12-14T07:37:15.105Z,1513237035.105 [DataOverHttps](INFO): SBD MOMSN=5438259
2017-12-14T07:37:15.128Z,1513237035.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:15.147Z,1513237035.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:16.248Z,1513237036.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:16.272Z,1513237036.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:16.275Z,1513237036.275 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:37:16.275Z,1513237036.275 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:37:16.275Z,1513237036.275 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:37:16.394Z,1513237036.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:16.416Z,1513237036.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:19.858Z,1513237039.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:19.926Z,1513237039.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:20.079Z,1513237040.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:20.114Z,1513237040.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:20.409Z,1513237040.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:20.442Z,1513237040.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:20.810Z,1513237040.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:20.826Z,1513237040.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:21.196Z,1513237041.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:21.234Z,1513237041.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:21.595Z,1513237041.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:21.626Z,1513237041.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:22.024Z,1513237042.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:22.043Z,1513237042.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:22.424Z,1513237042.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:22.439Z,1513237042.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:22.826Z,1513237042.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:22.847Z,1513237042.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:23.231Z,1513237043.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:23.274Z,1513237043.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:23.598Z,1513237043.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:23.626Z,1513237043.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:23.999Z,1513237043.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:24.030Z,1513237044.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:24.399Z,1513237044.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:24.427Z,1513237044.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:24.819Z,1513237044.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:24.928Z,1513237044.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:25.222Z,1513237045.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:25.238Z,1513237045.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:25.624Z,1513237045.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:25.639Z,1513237045.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:25.995Z,1513237045.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:26.022Z,1513237046.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:26.419Z,1513237046.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:26.448Z,1513237046.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:26.807Z,1513237046.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:26.827Z,1513237046.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:27.207Z,1513237047.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:27.227Z,1513237047.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:27.605Z,1513237047.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:27.627Z,1513237047.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:27.627Z,1513237047.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142
2017-12-14T07:37:27.627Z,1513237047.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:37:27.629Z,1513237047.629 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:27.629Z,1513237047.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 142
2017-12-14T07:37:27.629Z,1513237047.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:37:27.631Z,1513237047.631 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:27.631Z,1513237047.631 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2017-12-14T07:37:27.631Z,1513237047.631 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:37:27.679Z,1513237047.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:37:27.679Z,1513237047.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:37:27.679Z,1513237047.679 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:37:28.014Z,1513237048.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:28.067Z,1513237048.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:37:28.067Z,1513237048.067 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142
2017-12-14T07:37:28.067Z,1513237048.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:37:28.067Z,1513237048.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 142
2017-12-14T07:37:28.068Z,1513237048.068 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:37:28.068Z,1513237048.068 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2017-12-14T07:37:28.417Z,1513237048.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:28.431Z,1513237048.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:37:28.432Z,1513237048.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:37:28.432Z,1513237048.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:37:28.433Z,1513237048.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:37:28.433Z,1513237048.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:37:28.433Z,1513237048.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:37:28.434Z,1513237048.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:37:28.434Z,1513237048.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:37:28.434Z,1513237048.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:37:28.820Z,1513237048.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:28.839Z,1513237048.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:29.195Z,1513237049.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:29.231Z,1513237049.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:29.599Z,1513237049.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:29.626Z,1513237049.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:29.000Z,1513237050.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:30.026Z,1513237050.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:30.401Z,1513237050.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:30.448Z,1513237050.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:30.802Z,1513237050.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:30.850Z,1513237050.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:31.217Z,1513237051.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:31.279Z,1513237051.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:31.621Z,1513237051.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:31.635Z,1513237051.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:31.998Z,1513237051.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:32.035Z,1513237052.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:32.395Z,1513237052.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:32.431Z,1513237052.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:32.821Z,1513237052.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:32.914Z,1513237052.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:33.198Z,1513237053.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:33.224Z,1513237053.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:33.599Z,1513237053.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:33.623Z,1513237053.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:34.023Z,1513237054.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:34.038Z,1513237054.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:34.413Z,1513237054.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:34.432Z,1513237054.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:34.821Z,1513237054.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:34.837Z,1513237054.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:35.210Z,1513237055.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:35.237Z,1513237055.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:35.602Z,1513237055.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:35.617Z,1513237055.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:35.995Z,1513237055.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:36.029Z,1513237056.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:36.401Z,1513237056.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:36.435Z,1513237056.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:36.824Z,1513237056.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:36.839Z,1513237056.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:37.226Z,1513237057.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:37.241Z,1513237057.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:37.622Z,1513237057.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:37.638Z,1513237057.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:37.999Z,1513237057.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:38.094Z,1513237058.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:38.399Z,1513237058.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:38.424Z,1513237058.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:38.800Z,1513237058.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:38.827Z,1513237058.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:39.204Z,1513237059.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:39.273Z,1513237059.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:39.604Z,1513237059.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:39.634Z,1513237059.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:40.014Z,1513237060.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:40.076Z,1513237060.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:40.424Z,1513237060.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:40.439Z,1513237060.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:40.813Z,1513237060.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:40.839Z,1513237060.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:41.234Z,1513237061.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:41.284Z,1513237061.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:41.600Z,1513237061.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:41.616Z,1513237061.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:42.002Z,1513237062.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:42.016Z,1513237062.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:42.406Z,1513237062.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:42.421Z,1513237062.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:42.810Z,1513237062.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:42.841Z,1513237062.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:43.229Z,1513237063.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:43.243Z,1513237063.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:43.615Z,1513237063.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:43.638Z,1513237063.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:43.998Z,1513237063.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:44.013Z,1513237064.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:44.407Z,1513237064.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:44.441Z,1513237064.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:44.806Z,1513237064.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:44.864Z,1513237064.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:45.200Z,1513237065.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:45.223Z,1513237065.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:45.605Z,1513237065.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:45.620Z,1513237065.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:46.019Z,1513237066.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:46.039Z,1513237066.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:46.418Z,1513237066.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:46.433Z,1513237066.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:46.814Z,1513237066.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:46.828Z,1513237066.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:47.206Z,1513237067.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:47.222Z,1513237067.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:47.605Z,1513237067.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:47.620Z,1513237067.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:48.007Z,1513237068.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:48.027Z,1513237068.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:48.438Z,1513237068.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:48.471Z,1513237068.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:48.836Z,1513237068.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:48.946Z,1513237068.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:49.215Z,1513237069.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:49.235Z,1513237069.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:49.626Z,1513237069.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:49.641Z,1513237069.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:50.002Z,1513237070.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:50.031Z,1513237070.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:50.402Z,1513237070.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:50.416Z,1513237070.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:50.808Z,1513237070.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:50.895Z,1513237070.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:51.208Z,1513237071.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:51.242Z,1513237071.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:51.604Z,1513237071.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:51.663Z,1513237071.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:52.042Z,1513237072.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:52.062Z,1513237072.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:52.409Z,1513237072.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:52.459Z,1513237072.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:52.824Z,1513237072.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:52.860Z,1513237072.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:53.205Z,1513237073.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:53.220Z,1513237073.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:53.612Z,1513237073.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:53.627Z,1513237073.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:54.009Z,1513237074.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:54.023Z,1513237074.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:54.411Z,1513237074.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:54.427Z,1513237074.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:54.813Z,1513237074.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:54.827Z,1513237074.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:55.214Z,1513237075.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:55.275Z,1513237075.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:55.615Z,1513237075.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:55.630Z,1513237075.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:56.013Z,1513237076.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:56.027Z,1513237076.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:56.405Z,1513237076.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:56.544Z,1513237076.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:56.793Z,1513237076.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:56.823Z,1513237076.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:57.213Z,1513237077.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:57.227Z,1513237077.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:57.615Z,1513237077.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:57.635Z,1513237077.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:58.009Z,1513237078.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:58.035Z,1513237078.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:58.426Z,1513237078.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:58.457Z,1513237078.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:58.821Z,1513237078.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:58.836Z,1513237078.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:59.267Z,1513237079.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:59.281Z,1513237079.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:59.595Z,1513237079.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:37:59.618Z,1513237079.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:37:59.996Z,1513237079.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:00.026Z,1513237080.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:00.407Z,1513237080.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:00.436Z,1513237080.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:00.823Z,1513237080.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:00.918Z,1513237080.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:01.238Z,1513237081.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:01.253Z,1513237081.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:01.614Z,1513237081.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:01.639Z,1513237081.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:02.007Z,1513237082.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:02.038Z,1513237082.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:02.404Z,1513237082.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:02.419Z,1513237082.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:02.802Z,1513237082.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:02.821Z,1513237082.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:03.196Z,1513237083.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:03.223Z,1513237083.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:03.599Z,1513237083.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:03.639Z,1513237083.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:03.983Z,1513237083.983 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T07:38:03.983Z,1513237083.983 [NAL9602] Data Fault, FailCount= 4
2017-12-14T07:38:03.983Z,1513237083.983 [NAL9602](ERROR): Data Fault
2017-12-14T07:38:03.000Z,1513237084.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:04.043Z,1513237084.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:04.072Z,1513237084.072 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T07:38:04.378Z,1513237084.378 [NAL9602](INFO): Powering down
2017-12-14T07:38:04.396Z,1513237084.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:04.426Z,1513237084.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:04.794Z,1513237084.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:04.886Z,1513237084.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:05.198Z,1513237085.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:05.232Z,1513237085.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:05.245Z,1513237085.245 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T07:38:05.246Z,1513237085.246 [NAL9602] No Fault, FailCount= 4
2017-12-14T07:38:05.603Z,1513237085.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:05.630Z,1513237085.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:05.994Z,1513237085.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:06.032Z,1513237086.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:06.430Z,1513237086.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:06.490Z,1513237086.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:06.808Z,1513237086.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:06.838Z,1513237086.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:07.206Z,1513237087.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:07.240Z,1513237087.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:07.602Z,1513237087.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:07.639Z,1513237087.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:08.047Z,1513237088.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:08.094Z,1513237088.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:08.403Z,1513237088.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:08.438Z,1513237088.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:08.805Z,1513237088.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:08.836Z,1513237088.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:09.206Z,1513237089.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:09.233Z,1513237089.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:09.602Z,1513237089.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:09.617Z,1513237089.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:10.004Z,1513237090.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:10.023Z,1513237090.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:10.400Z,1513237090.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:10.416Z,1513237090.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:10.806Z,1513237090.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:10.847Z,1513237090.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:11.242Z,1513237091.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:11.292Z,1513237091.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:11.611Z,1513237091.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:11.702Z,1513237091.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:12.007Z,1513237092.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:12.022Z,1513237092.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:12.399Z,1513237092.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:12.449Z,1513237092.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:12.804Z,1513237092.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:12.819Z,1513237092.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:13.206Z,1513237093.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:13.246Z,1513237093.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:13.636Z,1513237093.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:13.752Z,1513237093.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:14.001Z,1513237094.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:14.016Z,1513237094.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:14.439Z,1513237094.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:14.484Z,1513237094.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:14.806Z,1513237094.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:14.820Z,1513237094.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:15.207Z,1513237095.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:15.232Z,1513237095.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:15.594Z,1513237095.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:15.608Z,1513237095.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:15.993Z,1513237095.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:16.007Z,1513237096.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:16.402Z,1513237096.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:16.429Z,1513237096.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:16.808Z,1513237096.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:16.839Z,1513237096.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:20.197Z,1513237100.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:20.229Z,1513237100.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:20.317Z,1513237100.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:20.352Z,1513237100.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:20.685Z,1513237100.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:20.700Z,1513237100.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:21.090Z,1513237101.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:21.105Z,1513237101.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:21.487Z,1513237101.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:21.538Z,1513237101.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:21.886Z,1513237101.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:21.900Z,1513237101.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:22.287Z,1513237102.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:22.301Z,1513237102.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:22.689Z,1513237102.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:22.703Z,1513237102.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:23.089Z,1513237103.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:23.103Z,1513237103.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:23.489Z,1513237103.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:23.503Z,1513237103.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:23.913Z,1513237103.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:23.956Z,1513237103.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:24.296Z,1513237104.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:24.312Z,1513237104.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:24.690Z,1513237104.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:24.704Z,1513237104.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:25.089Z,1513237105.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:25.104Z,1513237105.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:25.497Z,1513237105.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:25.511Z,1513237105.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:25.872Z,1513237105.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:25.908Z,1513237105.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:26.291Z,1513237106.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:26.307Z,1513237106.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:26.685Z,1513237106.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:26.701Z,1513237106.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:27.097Z,1513237107.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:27.128Z,1513237107.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:27.486Z,1513237107.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:27.520Z,1513237107.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:27.886Z,1513237107.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:27.925Z,1513237107.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:28.281Z,1513237108.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:28.331Z,1513237108.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:28.679Z,1513237108.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:28.700Z,1513237108.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:29.090Z,1513237109.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:29.113Z,1513237109.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:29.491Z,1513237109.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:29.505Z,1513237109.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:29.646Z,1513237109.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:29.886Z,1513237109.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:29.911Z,1513237109.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:30.309Z,1513237110.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:30.362Z,1513237110.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:30.442Z,1513237110.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:30.700Z,1513237110.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:30.715Z,1513237110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:31.078Z,1513237111.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:31.106Z,1513237111.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:31.478Z,1513237111.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:31.515Z,1513237111.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:31.878Z,1513237111.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:31.911Z,1513237111.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:32.292Z,1513237112.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:32.387Z,1513237112.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:32.679Z,1513237112.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:32.707Z,1513237112.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:33.083Z,1513237113.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:33.150Z,1513237113.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:33.495Z,1513237113.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:33.529Z,1513237113.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:33.878Z,1513237113.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:33.927Z,1513237113.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:34.282Z,1513237114.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:34.315Z,1513237114.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:34.674Z,1513237114.674 [NAL9602](INFO): Powering up NAL9602
2017-12-14T07:38:34.692Z,1513237114.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:34.727Z,1513237114.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:35.079Z,1513237115.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:35.117Z,1513237115.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:35.483Z,1513237115.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:35.514Z,1513237115.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:35.883Z,1513237115.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:35.916Z,1513237115.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:36.282Z,1513237116.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:36.316Z,1513237116.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:36.702Z,1513237116.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:36.726Z,1513237116.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:37.079Z,1513237117.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:37.114Z,1513237117.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:37.479Z,1513237117.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:37.515Z,1513237117.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:37.876Z,1513237117.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:37.891Z,1513237117.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:38.278Z,1513237118.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:38.319Z,1513237118.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:38.690Z,1513237118.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:38.718Z,1513237118.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:39.085Z,1513237119.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:39.099Z,1513237119.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:39.489Z,1513237119.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:39.504Z,1513237119.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:39.920Z,1513237119.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:39.960Z,1513237119.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:40.286Z,1513237120.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:40.302Z,1513237120.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:40.686Z,1513237120.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:40.701Z,1513237120.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:41.087Z,1513237121.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:41.107Z,1513237121.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:41.488Z,1513237121.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:41.502Z,1513237121.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:41.814Z,1513237121.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:41.886Z,1513237121.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:41.907Z,1513237121.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:42.289Z,1513237122.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:42.336Z,1513237122.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:42.609Z,1513237122.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:42.690Z,1513237122.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:42.711Z,1513237122.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:43.117Z,1513237123.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:43.166Z,1513237123.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:43.478Z,1513237123.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:43.515Z,1513237123.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:43.878Z,1513237123.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:43.909Z,1513237123.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:44.279Z,1513237124.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:44.316Z,1513237124.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:44.678Z,1513237124.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:44.703Z,1513237124.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:44.902Z,1513237124.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:45.078Z,1513237125.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:45.107Z,1513237125.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:45.309Z,1513237125.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:45.506Z,1513237125.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:45.521Z,1513237125.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:45.862Z,1513237125.862 [NAL9602](INFO): NAL9602 initialized
2017-12-14T07:38:45.879Z,1513237125.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:45.911Z,1513237125.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:46.320Z,1513237126.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:46.374Z,1513237126.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:46.709Z,1513237126.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:46.725Z,1513237126.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:47.100Z,1513237127.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:47.115Z,1513237127.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:47.496Z,1513237127.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:47.534Z,1513237127.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:47.883Z,1513237127.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:47.909Z,1513237127.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:48.102Z,1513237128.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:48.301Z,1513237128.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:48.316Z,1513237128.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:48.679Z,1513237128.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:48.717Z,1513237128.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:48.897Z,1513237128.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:49.097Z,1513237129.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:49.128Z,1513237129.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:49.301Z,1513237129.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:49.536Z,1513237129.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:49.587Z,1513237129.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:49.893Z,1513237129.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:49.955Z,1513237129.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:50.100Z,1513237130.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:50.281Z,1513237130.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:50.296Z,1513237130.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:50.694Z,1513237130.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:50.720Z,1513237130.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:50.893Z,1513237130.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:51.084Z,1513237131.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:51.099Z,1513237131.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:51.297Z,1513237131.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:51.486Z,1513237131.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:51.501Z,1513237131.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:51.891Z,1513237131.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:51.906Z,1513237131.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:52.093Z,1513237132.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:52.301Z,1513237132.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:52.331Z,1513237132.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:52.740Z,1513237132.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:52.760Z,1513237132.760 [BPC1](ERROR): Failed to parse message.
2017-12-14T07:38:52.760Z,1513237132.760 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T07:38:52.760Z,1513237132.760 [BPC1] Data Fault, FailCount= 1
2017-12-14T07:38:52.760Z,1513237132.760 [BPC1](ERROR): Data Fault
2017-12-14T07:38:52.805Z,1513237132.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:52.844Z,1513237132.844 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T07:38:52.890Z,1513237132.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:53.091Z,1513237133.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:53.130Z,1513237133.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:53.293Z,1513237133.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:53.488Z,1513237133.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:53.511Z,1513237133.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:53.879Z,1513237133.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:53.899Z,1513237133.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:53.929Z,1513237133.929 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:38:53.929Z,1513237133.929 [BPC1] No Fault, FailCount= 1
2017-12-14T07:38:54.089Z,1513237134.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:54.284Z,1513237134.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:54.363Z,1513237134.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:54.691Z,1513237134.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:54.734Z,1513237134.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:54.885Z,1513237134.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:55.094Z,1513237135.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:55.109Z,1513237135.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:55.289Z,1513237135.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:55.494Z,1513237135.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:55.512Z,1513237135.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:55.893Z,1513237135.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:55.992Z,1513237135.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:56.085Z,1513237136.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:56.287Z,1513237136.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:56.307Z,1513237136.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:56.688Z,1513237136.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:56.711Z,1513237136.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:56.883Z,1513237136.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:57.086Z,1513237137.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:57.113Z,1513237137.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:57.313Z,1513237137.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:57.492Z,1513237137.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:57.506Z,1513237137.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:57.884Z,1513237137.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:57.906Z,1513237137.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:58.109Z,1513237138.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:58.302Z,1513237138.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:58.316Z,1513237138.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:58.697Z,1513237138.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:58.711Z,1513237138.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:58.906Z,1513237138.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:59.143Z,1513237139.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:59.197Z,1513237139.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:59.309Z,1513237139.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:59.488Z,1513237139.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:59.523Z,1513237139.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:38:59.874Z,1513237139.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:38:59.908Z,1513237139.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:00.105Z,1513237140.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:00.295Z,1513237140.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:00.310Z,1513237140.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:00.689Z,1513237140.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:00.704Z,1513237140.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:00.901Z,1513237140.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:01.101Z,1513237141.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:01.117Z,1513237141.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:01.305Z,1513237141.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:01.501Z,1513237141.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:01.516Z,1513237141.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:01.903Z,1513237141.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:01.917Z,1513237141.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:02.308Z,1513237142.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:02.359Z,1513237142.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:02.684Z,1513237142.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:02.749Z,1513237142.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:03.081Z,1513237143.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:03.104Z,1513237143.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:03.481Z,1513237143.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:03.496Z,1513237143.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:03.888Z,1513237143.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:03.923Z,1513237143.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:04.298Z,1513237144.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:04.329Z,1513237144.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:04.702Z,1513237144.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:04.731Z,1513237144.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:05.103Z,1513237145.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:05.135Z,1513237145.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:05.488Z,1513237145.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:05.533Z,1513237145.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:05.886Z,1513237145.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:05.904Z,1513237145.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:06.290Z,1513237146.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:06.306Z,1513237146.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:06.690Z,1513237146.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:06.704Z,1513237146.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:07.094Z,1513237147.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:07.110Z,1513237147.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:07.499Z,1513237147.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:07.520Z,1513237147.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:07.903Z,1513237147.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:07.960Z,1513237147.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:08.291Z,1513237148.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:08.312Z,1513237148.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:08.679Z,1513237148.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:08.766Z,1513237148.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:09.079Z,1513237149.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:09.106Z,1513237149.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:09.480Z,1513237149.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:09.515Z,1513237149.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:09.884Z,1513237149.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:09.911Z,1513237149.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:09.924Z,1513237149.924 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:39:10.300Z,1513237150.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:10.323Z,1513237150.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:10.701Z,1513237150.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:10.718Z,1513237150.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:11.098Z,1513237151.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:11.113Z,1513237151.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:11.501Z,1513237151.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:11.516Z,1513237151.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:11.899Z,1513237151.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:11.922Z,1513237151.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:12.280Z,1513237152.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:12.311Z,1513237152.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:12.679Z,1513237152.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:12.722Z,1513237152.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:13.089Z,1513237153.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:13.163Z,1513237153.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:13.509Z,1513237153.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:13.524Z,1513237153.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:13.892Z,1513237153.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:13.918Z,1513237153.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:14.283Z,1513237154.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:14.319Z,1513237154.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:14.684Z,1513237154.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:14.711Z,1513237154.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:15.123Z,1513237155.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:15.186Z,1513237155.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:15.480Z,1513237155.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:15.499Z,1513237155.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:15.887Z,1513237155.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:15.942Z,1513237155.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:16.301Z,1513237156.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:16.325Z,1513237156.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:16.697Z,1513237156.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:16.722Z,1513237156.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:17.098Z,1513237157.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:17.128Z,1513237157.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:20.598Z,1513237160.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:20.622Z,1513237160.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:20.726Z,1513237160.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:20.772Z,1513237160.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:21.086Z,1513237161.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:21.100Z,1513237161.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:21.537Z,1513237161.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:21.576Z,1513237161.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:21.883Z,1513237161.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:21.922Z,1513237161.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:22.278Z,1513237162.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:22.294Z,1513237162.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:22.678Z,1513237162.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:22.693Z,1513237162.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:23.078Z,1513237163.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:23.101Z,1513237163.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:23.484Z,1513237163.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:23.499Z,1513237163.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:23.885Z,1513237163.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:23.899Z,1513237163.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:24.287Z,1513237164.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:24.348Z,1513237164.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:24.708Z,1513237164.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:24.747Z,1513237164.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:25.093Z,1513237165.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:25.116Z,1513237165.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:25.485Z,1513237165.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:25.500Z,1513237165.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:25.881Z,1513237165.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:25.895Z,1513237165.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:26.283Z,1513237166.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:26.297Z,1513237166.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:26.668Z,1513237166.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:26.700Z,1513237166.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:27.081Z,1513237167.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:27.111Z,1513237167.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:27.495Z,1513237167.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:27.509Z,1513237167.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:27.881Z,1513237167.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:27.915Z,1513237167.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:28.275Z,1513237168.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:28.308Z,1513237168.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:28.672Z,1513237168.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:28.711Z,1513237168.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:29.076Z,1513237169.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:29.108Z,1513237169.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:29.472Z,1513237169.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:29.503Z,1513237169.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:29.876Z,1513237169.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:29.916Z,1513237169.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:30.282Z,1513237170.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:30.308Z,1513237170.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:30.686Z,1513237170.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:30.712Z,1513237170.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:31.115Z,1513237171.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:31.130Z,1513237171.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:31.478Z,1513237171.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:31.501Z,1513237171.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:31.883Z,1513237171.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:31.901Z,1513237171.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:32.272Z,1513237172.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:32.307Z,1513237172.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:32.671Z,1513237172.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:32.696Z,1513237172.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:33.096Z,1513237173.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:33.119Z,1513237173.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:33.499Z,1513237173.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:33.515Z,1513237173.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:33.890Z,1513237173.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:33.911Z,1513237173.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:34.290Z,1513237174.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:34.322Z,1513237174.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:34.671Z,1513237174.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:34.703Z,1513237174.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:35.075Z,1513237175.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:35.151Z,1513237175.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:35.472Z,1513237175.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:35.503Z,1513237175.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:35.872Z,1513237175.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:35.886Z,1513237175.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:36.282Z,1513237176.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:36.340Z,1513237176.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:36.707Z,1513237176.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:36.722Z,1513237176.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:37.089Z,1513237177.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:37.122Z,1513237177.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:37.532Z,1513237177.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:37.611Z,1513237177.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:37.887Z,1513237177.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:37.930Z,1513237177.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:38.281Z,1513237178.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:38.329Z,1513237178.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:38.681Z,1513237178.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:38.728Z,1513237178.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:39.082Z,1513237179.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:39.096Z,1513237179.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:39.497Z,1513237179.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:39.529Z,1513237179.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:39.886Z,1513237179.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:39.901Z,1513237179.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:40.276Z,1513237180.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:40.311Z,1513237180.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:40.686Z,1513237180.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:40.701Z,1513237180.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:41.072Z,1513237181.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:41.100Z,1513237181.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:41.472Z,1513237181.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:41.503Z,1513237181.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:41.871Z,1513237181.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:41.899Z,1513237181.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:42.287Z,1513237182.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:42.319Z,1513237182.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:42.696Z,1513237182.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:42.711Z,1513237182.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:43.094Z,1513237183.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:43.126Z,1513237183.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:43.475Z,1513237183.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:43.502Z,1513237183.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:43.897Z,1513237183.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:43.915Z,1513237183.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:44.271Z,1513237184.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:44.315Z,1513237184.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:44.671Z,1513237184.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:44.707Z,1513237184.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:45.086Z,1513237185.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:45.114Z,1513237185.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:45.486Z,1513237185.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:45.521Z,1513237185.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:45.881Z,1513237185.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:45.908Z,1513237185.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:46.279Z,1513237186.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:46.315Z,1513237186.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:46.679Z,1513237186.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:46.728Z,1513237186.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:47.094Z,1513237187.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:47.134Z,1513237187.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:47.481Z,1513237187.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:47.496Z,1513237187.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:47.879Z,1513237187.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:47.894Z,1513237187.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:48.286Z,1513237188.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:48.302Z,1513237188.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:48.686Z,1513237188.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:48.700Z,1513237188.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:49.086Z,1513237189.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:49.100Z,1513237189.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:49.478Z,1513237189.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:49.504Z,1513237189.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:49.876Z,1513237189.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:49.910Z,1513237189.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:50.312Z,1513237190.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:50.339Z,1513237190.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:50.680Z,1513237190.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:50.699Z,1513237190.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:51.088Z,1513237191.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:51.104Z,1513237191.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:51.494Z,1513237191.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:51.515Z,1513237191.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:51.890Z,1513237191.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:51.955Z,1513237191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:52.272Z,1513237192.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:52.298Z,1513237192.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:52.671Z,1513237192.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:52.714Z,1513237192.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:53.075Z,1513237193.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:53.096Z,1513237193.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:53.490Z,1513237193.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:53.526Z,1513237193.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:53.871Z,1513237193.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:53.904Z,1513237193.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:54.295Z,1513237194.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:54.310Z,1513237194.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:54.695Z,1513237194.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:54.710Z,1513237194.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:55.094Z,1513237195.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:55.119Z,1513237195.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:55.475Z,1513237195.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:55.500Z,1513237195.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:55.871Z,1513237195.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:55.896Z,1513237195.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:56.271Z,1513237196.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:56.303Z,1513237196.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:56.671Z,1513237196.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:56.739Z,1513237196.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:57.091Z,1513237197.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:57.106Z,1513237197.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:57.496Z,1513237197.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:57.510Z,1513237197.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:57.895Z,1513237197.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:57.910Z,1513237197.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:58.275Z,1513237198.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:58.300Z,1513237198.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:58.692Z,1513237198.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:58.707Z,1513237198.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:59.091Z,1513237199.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:59.151Z,1513237199.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:59.477Z,1513237199.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:59.504Z,1513237199.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:39:59.902Z,1513237199.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:39:59.932Z,1513237199.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:00.284Z,1513237200.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:00.335Z,1513237200.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:00.685Z,1513237200.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:00.700Z,1513237200.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:01.089Z,1513237201.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:01.128Z,1513237201.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:01.483Z,1513237201.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:01.503Z,1513237201.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:01.883Z,1513237201.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:01.903Z,1513237201.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:02.284Z,1513237202.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:02.299Z,1513237202.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:02.681Z,1513237202.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:02.695Z,1513237202.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:03.137Z,1513237203.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:03.192Z,1513237203.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:03.490Z,1513237203.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:03.527Z,1513237203.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:03.884Z,1513237203.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:03.907Z,1513237203.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:04.283Z,1513237204.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:04.307Z,1513237204.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:04.680Z,1513237204.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:04.694Z,1513237204.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:05.074Z,1513237205.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:05.105Z,1513237205.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:05.487Z,1513237205.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:05.506Z,1513237205.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:05.887Z,1513237205.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:05.901Z,1513237205.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:06.305Z,1513237206.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:06.340Z,1513237206.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:06.691Z,1513237206.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:06.727Z,1513237206.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:07.106Z,1513237207.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:07.127Z,1513237207.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:07.476Z,1513237207.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:07.491Z,1513237207.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:07.880Z,1513237207.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:07.895Z,1513237207.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:08.284Z,1513237208.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:08.299Z,1513237208.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:08.677Z,1513237208.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:08.692Z,1513237208.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:09.095Z,1513237209.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:09.128Z,1513237209.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:09.492Z,1513237209.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:09.535Z,1513237209.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:09.889Z,1513237209.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:09.907Z,1513237209.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:10.284Z,1513237210.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:10.307Z,1513237210.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:10.682Z,1513237210.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:10.697Z,1513237210.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:11.079Z,1513237211.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:11.104Z,1513237211.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:11.483Z,1513237211.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:11.499Z,1513237211.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:11.884Z,1513237211.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:11.898Z,1513237211.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:12.288Z,1513237212.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:12.308Z,1513237212.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:12.695Z,1513237212.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:12.727Z,1513237212.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:13.095Z,1513237213.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:13.115Z,1513237213.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:13.475Z,1513237213.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:13.507Z,1513237213.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:13.871Z,1513237213.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:13.904Z,1513237213.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:14.271Z,1513237214.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:14.302Z,1513237214.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:14.671Z,1513237214.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:14.702Z,1513237214.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:15.089Z,1513237215.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:15.110Z,1513237215.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:15.495Z,1513237215.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:15.509Z,1513237215.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:15.886Z,1513237215.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:15.917Z,1513237215.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:16.271Z,1513237216.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:16.308Z,1513237216.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:16.675Z,1513237216.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:16.706Z,1513237216.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:17.071Z,1513237217.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:17.103Z,1513237217.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:17.476Z,1513237217.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:17.514Z,1513237217.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:21.031Z,1513237221.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:21.054Z,1513237221.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:21.178Z,1513237221.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:21.235Z,1513237221.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:21.525Z,1513237221.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:21.573Z,1513237221.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:21.926Z,1513237221.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:21.999Z,1513237221.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:22.325Z,1513237222.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:22.374Z,1513237222.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:22.713Z,1513237222.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:22.761Z,1513237222.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:23.118Z,1513237223.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:23.173Z,1513237223.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:23.519Z,1513237223.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:23.534Z,1513237223.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:23.917Z,1513237223.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:23.975Z,1513237223.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:24.323Z,1513237224.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:24.338Z,1513237224.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:24.721Z,1513237224.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:24.737Z,1513237224.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:25.122Z,1513237225.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:25.136Z,1513237225.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:25.537Z,1513237225.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:25.563Z,1513237225.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:25.913Z,1513237225.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:25.947Z,1513237225.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:26.314Z,1513237226.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:26.330Z,1513237226.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:26.711Z,1513237226.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:26.727Z,1513237226.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:27.125Z,1513237227.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:27.157Z,1513237227.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:27.524Z,1513237227.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:27.539Z,1513237227.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:27.927Z,1513237227.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:27.942Z,1513237227.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:28.300Z,1513237228.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:28.332Z,1513237228.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:28.749Z,1513237228.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:28.789Z,1513237228.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:28.790Z,1513237228.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143
2017-12-14T07:40:28.790Z,1513237228.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:40:28.791Z,1513237228.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:28.792Z,1513237228.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 143
2017-12-14T07:40:28.792Z,1513237228.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:40:28.798Z,1513237228.798 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:28.798Z,1513237228.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2017-12-14T07:40:28.798Z,1513237228.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:40:28.878Z,1513237228.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:40:28.878Z,1513237228.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:40:28.879Z,1513237228.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:40:29.110Z,1513237229.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:29.163Z,1513237229.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:40:29.163Z,1513237229.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143
2017-12-14T07:40:29.164Z,1513237229.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:40:29.164Z,1513237229.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 143
2017-12-14T07:40:29.164Z,1513237229.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:40:29.164Z,1513237229.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2017-12-14T07:40:29.511Z,1513237229.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:29.546Z,1513237229.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:40:29.547Z,1513237229.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:40:29.547Z,1513237229.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:40:29.547Z,1513237229.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:40:29.548Z,1513237229.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:40:29.548Z,1513237229.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:40:29.548Z,1513237229.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:40:29.553Z,1513237229.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:40:29.553Z,1513237229.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:40:29.918Z,1513237229.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:29.939Z,1513237229.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:30.321Z,1513237230.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:30.336Z,1513237230.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:30.720Z,1513237230.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:30.736Z,1513237230.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:31.123Z,1513237231.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:31.139Z,1513237231.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:31.516Z,1513237231.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:31.530Z,1513237231.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:31.920Z,1513237231.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:31.955Z,1513237231.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:32.321Z,1513237232.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:32.389Z,1513237232.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:32.722Z,1513237232.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:32.750Z,1513237232.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:33.108Z,1513237233.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:33.128Z,1513237233.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:33.511Z,1513237233.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:33.531Z,1513237233.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:33.925Z,1513237233.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:33.960Z,1513237233.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:34.321Z,1513237234.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:34.336Z,1513237234.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:34.718Z,1513237234.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:34.732Z,1513237234.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:35.143Z,1513237235.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:35.187Z,1513237235.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:35.503Z,1513237235.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:35.551Z,1513237235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:35.925Z,1513237235.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:35.940Z,1513237235.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:36.327Z,1513237236.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:36.341Z,1513237236.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:36.726Z,1513237236.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:36.748Z,1513237236.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:37.104Z,1513237237.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:37.131Z,1513237237.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:37.503Z,1513237237.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:37.530Z,1513237237.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:37.918Z,1513237237.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:37.946Z,1513237237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:38.332Z,1513237238.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:38.379Z,1513237238.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:38.726Z,1513237238.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:38.740Z,1513237238.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:39.109Z,1513237239.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:39.136Z,1513237239.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:39.503Z,1513237239.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:39.542Z,1513237239.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:39.933Z,1513237239.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:39.954Z,1513237239.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:40.330Z,1513237240.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:40.346Z,1513237240.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:40.714Z,1513237240.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:40.740Z,1513237240.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:41.104Z,1513237241.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:41.140Z,1513237241.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:41.503Z,1513237241.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:41.538Z,1513237241.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:41.915Z,1513237241.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:41.946Z,1513237241.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:42.322Z,1513237242.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:42.348Z,1513237242.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:42.738Z,1513237242.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:42.761Z,1513237242.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:43.114Z,1513237243.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:43.155Z,1513237243.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:43.513Z,1513237243.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:43.528Z,1513237243.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:43.926Z,1513237243.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:43.976Z,1513237243.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:44.317Z,1513237244.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:44.370Z,1513237244.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:44.727Z,1513237244.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:44.756Z,1513237244.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:45.112Z,1513237245.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:45.173Z,1513237245.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:45.512Z,1513237245.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:45.534Z,1513237245.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:45.923Z,1513237245.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:45.987Z,1513237245.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:46.322Z,1513237246.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:46.336Z,1513237246.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:46.723Z,1513237246.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:46.748Z,1513237246.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:47.114Z,1513237247.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:47.129Z,1513237247.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:47.505Z,1513237247.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:47.537Z,1513237247.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:47.969Z,1513237247.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:47.992Z,1513237247.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:48.328Z,1513237248.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:48.352Z,1513237248.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:48.726Z,1513237248.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:48.747Z,1513237248.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:49.104Z,1513237249.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:49.132Z,1513237249.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:49.503Z,1513237249.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:49.537Z,1513237249.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:49.913Z,1513237249.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:49.944Z,1513237249.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:50.331Z,1513237250.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:50.346Z,1513237250.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:50.728Z,1513237250.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:50.742Z,1513237250.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:51.130Z,1513237251.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:51.161Z,1513237251.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:51.510Z,1513237251.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:51.542Z,1513237251.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:51.919Z,1513237251.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:51.955Z,1513237251.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:52.313Z,1513237252.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:52.346Z,1513237252.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:52.713Z,1513237252.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:52.753Z,1513237252.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:53.110Z,1513237253.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:53.124Z,1513237253.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:53.511Z,1513237253.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:53.531Z,1513237253.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:53.925Z,1513237253.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:53.964Z,1513237253.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:54.355Z,1513237254.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:54.423Z,1513237254.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:54.716Z,1513237254.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:54.761Z,1513237254.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:55.114Z,1513237255.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:55.141Z,1513237255.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:55.517Z,1513237255.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:55.539Z,1513237255.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:55.927Z,1513237255.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:55.954Z,1513237255.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:56.330Z,1513237256.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:56.344Z,1513237256.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:56.728Z,1513237256.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:56.742Z,1513237256.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:57.103Z,1513237257.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:57.136Z,1513237257.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:57.571Z,1513237257.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:57.611Z,1513237257.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:57.903Z,1513237257.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:57.931Z,1513237257.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:58.318Z,1513237258.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:58.346Z,1513237258.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:58.721Z,1513237258.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:58.743Z,1513237258.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:59.121Z,1513237259.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:59.161Z,1513237259.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:59.506Z,1513237259.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:59.521Z,1513237259.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:40:59.915Z,1513237259.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:40:59.953Z,1513237259.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:00.309Z,1513237260.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:00.324Z,1513237260.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:00.707Z,1513237260.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:00.728Z,1513237260.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:01.124Z,1513237261.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:01.139Z,1513237261.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:01.527Z,1513237261.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:01.542Z,1513237261.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:01.923Z,1513237261.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:01.942Z,1513237261.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:02.321Z,1513237262.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:02.350Z,1513237262.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:02.719Z,1513237262.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:02.739Z,1513237262.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:03.109Z,1513237263.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:03.135Z,1513237263.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:03.511Z,1513237263.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:03.527Z,1513237263.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:03.935Z,1513237263.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:04.016Z,1513237264.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:04.326Z,1513237264.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:04.366Z,1513237264.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:04.725Z,1513237264.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:04.744Z,1513237264.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:05.129Z,1513237265.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:05.146Z,1513237265.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:05.503Z,1513237265.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:05.530Z,1513237265.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:05.903Z,1513237265.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:05.944Z,1513237265.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:06.304Z,1513237266.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:06.402Z,1513237266.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:06.703Z,1513237266.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:06.735Z,1513237266.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:07.136Z,1513237267.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:07.211Z,1513237267.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:07.542Z,1513237267.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:07.575Z,1513237267.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:07.915Z,1513237267.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:07.956Z,1513237267.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:08.311Z,1513237268.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:08.347Z,1513237268.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:08.715Z,1513237268.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:08.752Z,1513237268.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:09.110Z,1513237269.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:09.143Z,1513237269.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:09.508Z,1513237269.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:09.523Z,1513237269.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:09.925Z,1513237269.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:09.956Z,1513237269.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:10.336Z,1513237270.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:10.374Z,1513237270.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:10.725Z,1513237270.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:10.752Z,1513237270.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:11.112Z,1513237271.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:11.127Z,1513237271.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:11.513Z,1513237271.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:11.528Z,1513237271.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:11.913Z,1513237271.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:11.929Z,1513237271.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:12.325Z,1513237272.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:12.361Z,1513237272.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:12.714Z,1513237272.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:12.728Z,1513237272.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:13.108Z,1513237273.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:13.127Z,1513237273.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:13.516Z,1513237273.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:13.535Z,1513237273.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:13.923Z,1513237273.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:13.938Z,1513237273.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:14.324Z,1513237274.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:14.339Z,1513237274.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:14.747Z,1513237274.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:14.795Z,1513237274.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:15.117Z,1513237275.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:15.161Z,1513237275.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:15.512Z,1513237275.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:15.526Z,1513237275.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:15.927Z,1513237275.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:15.941Z,1513237275.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:16.321Z,1513237276.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:16.371Z,1513237276.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:16.761Z,1513237276.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:16.787Z,1513237276.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:17.111Z,1513237277.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:17.148Z,1513237277.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:17.510Z,1513237277.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:17.537Z,1513237277.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:24.019Z,1513237284.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:24.074Z,1513237284.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:24.222Z,1513237284.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:24.260Z,1513237284.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:24.595Z,1513237284.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:24.643Z,1513237284.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:24.963Z,1513237284.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:25.038Z,1513237285.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:25.366Z,1513237285.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:25.408Z,1513237285.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:25.766Z,1513237285.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:25.791Z,1513237285.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:26.181Z,1513237286.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:26.228Z,1513237286.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:26.600Z,1513237286.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:26.644Z,1513237286.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:26.986Z,1513237286.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:27.021Z,1513237287.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:27.356Z,1513237287.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:27.406Z,1513237287.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:27.782Z,1513237287.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:27.799Z,1513237287.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:28.156Z,1513237288.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:28.251Z,1513237288.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:28.612Z,1513237288.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:28.675Z,1513237288.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:29.003Z,1513237289.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:29.096Z,1513237289.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:29.395Z,1513237289.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:29.411Z,1513237289.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:29.770Z,1513237289.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:29.850Z,1513237289.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:30.156Z,1513237290.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:30.204Z,1513237290.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:30.555Z,1513237290.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:30.591Z,1513237290.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:30.994Z,1513237290.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:31.012Z,1513237291.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:31.370Z,1513237291.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:31.397Z,1513237291.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:31.785Z,1513237291.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:31.807Z,1513237291.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:32.164Z,1513237292.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:32.234Z,1513237292.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:32.567Z,1513237292.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:32.590Z,1513237292.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:32.978Z,1513237292.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:33.028Z,1513237293.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:33.368Z,1513237293.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:33.395Z,1513237293.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:33.765Z,1513237293.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:33.811Z,1513237293.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:34.181Z,1513237294.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:34.232Z,1513237294.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:34.608Z,1513237294.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:34.690Z,1513237294.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:34.984Z,1513237294.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:35.011Z,1513237295.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:35.366Z,1513237295.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:35.404Z,1513237295.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:35.784Z,1513237295.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:35.861Z,1513237295.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:36.160Z,1513237296.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:36.195Z,1513237296.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:36.611Z,1513237296.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:36.666Z,1513237296.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:36.976Z,1513237296.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:37.020Z,1513237297.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:37.372Z,1513237297.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:37.391Z,1513237297.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:37.776Z,1513237297.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:37.818Z,1513237297.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:38.168Z,1513237298.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:38.234Z,1513237298.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:38.584Z,1513237298.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:38.633Z,1513237298.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:38.972Z,1513237298.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:39.022Z,1513237299.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:39.381Z,1513237299.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:39.432Z,1513237299.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:39.777Z,1513237299.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:39.814Z,1513237299.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:40.185Z,1513237300.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:40.208Z,1513237300.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:40.588Z,1513237300.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:40.619Z,1513237300.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:40.970Z,1513237300.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:41.019Z,1513237301.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:41.378Z,1513237301.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:41.401Z,1513237301.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:41.771Z,1513237301.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:41.826Z,1513237301.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:42.163Z,1513237302.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:42.209Z,1513237302.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:42.578Z,1513237302.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:42.675Z,1513237302.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:42.975Z,1513237302.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:42.998Z,1513237302.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:43.380Z,1513237303.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:43.443Z,1513237303.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:43.766Z,1513237303.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:43.815Z,1513237303.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:44.164Z,1513237304.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:44.202Z,1513237304.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:44.555Z,1513237304.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:44.581Z,1513237304.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:44.981Z,1513237304.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:44.996Z,1513237304.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:45.382Z,1513237305.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:45.398Z,1513237305.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:45.773Z,1513237305.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:45.796Z,1513237305.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:46.173Z,1513237306.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:46.188Z,1513237306.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:46.571Z,1513237306.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:46.597Z,1513237306.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:46.998Z,1513237306.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:47.019Z,1513237307.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:47.373Z,1513237307.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:47.396Z,1513237307.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:47.774Z,1513237307.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:47.803Z,1513237307.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:48.162Z,1513237308.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:48.176Z,1513237308.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:48.602Z,1513237308.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:48.623Z,1513237308.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:48.970Z,1513237308.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:49.001Z,1513237309.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:49.361Z,1513237309.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:49.376Z,1513237309.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:49.769Z,1513237309.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:49.837Z,1513237309.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:50.170Z,1513237310.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:50.244Z,1513237310.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:50.606Z,1513237310.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:50.626Z,1513237310.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:50.972Z,1513237310.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:50.988Z,1513237310.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:51.359Z,1513237311.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:51.400Z,1513237311.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:51.763Z,1513237311.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:51.778Z,1513237311.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:52.157Z,1513237312.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:52.195Z,1513237312.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:52.593Z,1513237312.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:52.622Z,1513237312.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:52.966Z,1513237312.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:52.980Z,1513237312.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:53.370Z,1513237313.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:53.391Z,1513237313.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:53.769Z,1513237313.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:53.784Z,1513237313.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:54.158Z,1513237314.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:54.172Z,1513237314.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:54.570Z,1513237314.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:54.584Z,1513237314.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:54.969Z,1513237314.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:54.984Z,1513237314.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:55.366Z,1513237315.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:55.380Z,1513237315.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:55.784Z,1513237315.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:55.807Z,1513237315.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:56.155Z,1513237316.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:56.169Z,1513237316.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:56.563Z,1513237316.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:56.611Z,1513237316.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:57.004Z,1513237317.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:57.020Z,1513237317.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:57.360Z,1513237317.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:57.375Z,1513237317.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:57.756Z,1513237317.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:57.771Z,1513237317.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:58.170Z,1513237318.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:58.185Z,1513237318.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:58.574Z,1513237318.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:58.588Z,1513237318.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:58.968Z,1513237318.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:58.996Z,1513237318.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:59.355Z,1513237319.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:59.375Z,1513237319.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:41:59.756Z,1513237319.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:41:59.798Z,1513237319.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:00.157Z,1513237320.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:00.187Z,1513237320.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:00.557Z,1513237320.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:00.622Z,1513237320.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:00.967Z,1513237320.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:00.991Z,1513237320.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:01.373Z,1513237321.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:01.454Z,1513237321.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:01.775Z,1513237321.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:01.789Z,1513237321.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:02.169Z,1513237322.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:02.201Z,1513237322.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:02.582Z,1513237322.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:02.597Z,1513237322.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:02.981Z,1513237322.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:02.995Z,1513237322.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:03.381Z,1513237323.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:03.396Z,1513237323.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:03.780Z,1513237323.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:03.795Z,1513237323.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:04.156Z,1513237324.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:04.183Z,1513237324.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:04.588Z,1513237324.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:04.603Z,1513237324.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:04.975Z,1513237324.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:04.999Z,1513237324.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:05.390Z,1513237325.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:05.418Z,1513237325.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:05.773Z,1513237325.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:05.803Z,1513237325.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:06.156Z,1513237326.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:06.172Z,1513237326.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:06.577Z,1513237326.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:06.604Z,1513237326.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:06.963Z,1513237326.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:06.978Z,1513237326.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:07.372Z,1513237327.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:07.405Z,1513237327.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:07.761Z,1513237327.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:07.783Z,1513237327.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:08.179Z,1513237328.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:08.223Z,1513237328.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:08.617Z,1513237328.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:08.664Z,1513237328.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:08.966Z,1513237328.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:08.986Z,1513237328.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:09.365Z,1513237329.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:09.380Z,1513237329.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:09.758Z,1513237329.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:09.781Z,1513237329.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:10.168Z,1513237330.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:10.184Z,1513237330.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:10.581Z,1513237330.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:10.640Z,1513237330.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:10.978Z,1513237330.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:11.024Z,1513237331.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:11.372Z,1513237331.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:11.404Z,1513237331.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:11.774Z,1513237331.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:11.836Z,1513237331.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:12.167Z,1513237332.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:12.227Z,1513237332.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:12.564Z,1513237332.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:12.626Z,1513237332.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:12.960Z,1513237332.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:12.976Z,1513237332.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:13.364Z,1513237333.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:13.418Z,1513237333.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:13.762Z,1513237333.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:13.781Z,1513237333.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:14.177Z,1513237334.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:14.223Z,1513237334.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:14.570Z,1513237334.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:14.607Z,1513237334.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:14.968Z,1513237334.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:15.056Z,1513237335.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:15.367Z,1513237335.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:15.382Z,1513237335.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:15.764Z,1513237335.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:15.787Z,1513237335.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:16.165Z,1513237336.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:16.179Z,1513237336.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:16.596Z,1513237336.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:16.627Z,1513237336.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:16.635Z,1513237336.635 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T07:42:16.635Z,1513237336.635 [Default:CheckIn:C.Wait] Stopped
2017-12-14T07:42:16.635Z,1513237336.635 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T07:42:16.635Z,1513237336.635 [Default:CheckIn:D] Running Loop=1
2017-12-14T07:42:16.969Z,1513237336.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:16.984Z,1513237336.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:16.988Z,1513237336.988 [Default:CheckIn:D] Stopped
2017-12-14T07:42:16.988Z,1513237336.988 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:42:17.375Z,1513237337.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:17.395Z,1513237337.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:17.415Z,1513237337.415 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 429.026628 min 
2017-12-14T07:42:17.415Z,1513237337.415 [Default:CheckIn:E] Stopped
2017-12-14T07:42:17.415Z,1513237337.415 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:42:17.415Z,1513237337.415 [Default:CheckIn] Stopped
2017-12-14T07:42:17.415Z,1513237337.415 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:42:17.416Z,1513237337.416 [Default:CheckIn](INFO): Running loop #42
2017-12-14T07:42:17.416Z,1513237337.416 [Default:CheckIn] Running Loop=42
2017-12-14T07:42:17.416Z,1513237337.416 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:42:17.416Z,1513237337.416 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:42:17.773Z,1513237337.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:17.789Z,1513237337.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:21.544Z,1513237341.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:21.577Z,1513237341.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:21.676Z,1513237341.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:21.691Z,1513237341.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:22.041Z,1513237342.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:22.074Z,1513237342.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:22.445Z,1513237342.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:22.570Z,1513237342.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:22.838Z,1513237342.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:22.855Z,1513237342.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:23.230Z,1513237343.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:23.255Z,1513237343.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:23.633Z,1513237343.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:23.647Z,1513237343.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:24.034Z,1513237344.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:24.048Z,1513237344.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:24.431Z,1513237344.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:24.446Z,1513237344.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:24.831Z,1513237344.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:24.851Z,1513237344.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:25.234Z,1513237345.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:25.255Z,1513237345.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:25.645Z,1513237345.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:25.659Z,1513237345.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:26.038Z,1513237346.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:26.062Z,1513237346.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:26.425Z,1513237346.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:26.440Z,1513237346.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:26.828Z,1513237346.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:26.908Z,1513237346.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:27.231Z,1513237347.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:27.251Z,1513237347.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:27.631Z,1513237347.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:27.651Z,1513237347.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:28.045Z,1513237348.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:28.077Z,1513237348.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:28.442Z,1513237348.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:28.456Z,1513237348.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:28.876Z,1513237348.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:28.939Z,1513237348.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:29.230Z,1513237349.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:29.246Z,1513237349.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:29.632Z,1513237349.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:29.656Z,1513237349.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:30.035Z,1513237350.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:30.052Z,1513237350.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:30.436Z,1513237350.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:30.451Z,1513237350.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:30.848Z,1513237350.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:30.883Z,1513237350.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:31.258Z,1513237351.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:31.274Z,1513237351.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:31.637Z,1513237351.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:31.665Z,1513237351.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:32.037Z,1513237352.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:32.069Z,1513237352.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:32.425Z,1513237352.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:32.440Z,1513237352.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:32.841Z,1513237352.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:32.855Z,1513237352.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:33.236Z,1513237353.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:33.259Z,1513237353.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:33.631Z,1513237353.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:33.648Z,1513237353.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:34.045Z,1513237354.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:34.112Z,1513237354.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:34.449Z,1513237354.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:34.464Z,1513237354.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:34.851Z,1513237354.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:34.912Z,1513237354.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:35.235Z,1513237355.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:35.265Z,1513237355.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:35.629Z,1513237355.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:35.644Z,1513237355.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:36.024Z,1513237356.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:36.078Z,1513237356.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:36.428Z,1513237356.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:36.442Z,1513237356.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:36.823Z,1513237356.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:36.867Z,1513237356.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:37.246Z,1513237357.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:37.260Z,1513237357.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:37.653Z,1513237357.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:37.672Z,1513237357.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:38.041Z,1513237358.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:38.068Z,1513237358.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:38.431Z,1513237358.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:38.472Z,1513237358.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:38.833Z,1513237358.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:38.982Z,1513237358.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:39.231Z,1513237359.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:39.246Z,1513237359.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:39.631Z,1513237359.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:39.667Z,1513237359.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:40.041Z,1513237360.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:40.073Z,1513237360.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:40.445Z,1513237360.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:40.474Z,1513237360.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:40.895Z,1513237360.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:40.954Z,1513237360.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:41.240Z,1513237361.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:41.260Z,1513237361.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:41.636Z,1513237361.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:41.651Z,1513237361.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:42.034Z,1513237362.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:42.048Z,1513237362.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:42.436Z,1513237362.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:42.451Z,1513237362.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:42.829Z,1513237362.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:42.931Z,1513237362.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:43.242Z,1513237363.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:43.267Z,1513237363.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:43.645Z,1513237363.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:43.671Z,1513237363.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:44.037Z,1513237364.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:44.071Z,1513237364.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:44.429Z,1513237364.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:44.444Z,1513237364.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:44.838Z,1513237364.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:44.853Z,1513237364.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:45.233Z,1513237365.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:45.284Z,1513237365.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:45.630Z,1513237365.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:45.651Z,1513237365.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:46.041Z,1513237366.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:46.056Z,1513237366.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:46.446Z,1513237366.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:46.467Z,1513237366.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:46.846Z,1513237366.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:46.866Z,1513237366.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:47.266Z,1513237367.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:47.306Z,1513237367.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:47.624Z,1513237367.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:47.660Z,1513237367.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:48.024Z,1513237368.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:48.054Z,1513237368.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:48.426Z,1513237368.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:48.462Z,1513237368.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:48.833Z,1513237368.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:48.847Z,1513237368.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:49.249Z,1513237369.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:49.279Z,1513237369.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:49.641Z,1513237369.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:49.676Z,1513237369.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:50.042Z,1513237370.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:50.074Z,1513237370.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:50.438Z,1513237370.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:50.479Z,1513237370.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:50.832Z,1513237370.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:50.851Z,1513237370.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:51.233Z,1513237371.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:51.248Z,1513237371.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:51.630Z,1513237371.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:51.657Z,1513237371.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:52.047Z,1513237372.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:52.061Z,1513237372.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:52.447Z,1513237372.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:52.467Z,1513237372.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:52.849Z,1513237372.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:52.871Z,1513237372.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:53.224Z,1513237373.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:53.252Z,1513237373.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:53.628Z,1513237373.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:53.654Z,1513237373.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:54.023Z,1513237374.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:54.059Z,1513237374.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:54.432Z,1513237374.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:54.459Z,1513237374.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:54.824Z,1513237374.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:54.904Z,1513237374.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:55.243Z,1513237375.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:55.271Z,1513237375.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:55.642Z,1513237375.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:55.670Z,1513237375.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:56.046Z,1513237376.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:56.076Z,1513237376.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:56.433Z,1513237376.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:56.448Z,1513237376.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:56.833Z,1513237376.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:56.991Z,1513237376.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:57.224Z,1513237377.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:57.307Z,1513237377.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:57.620Z,1513237377.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:57.647Z,1513237377.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:58.038Z,1513237378.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:58.075Z,1513237378.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:58.448Z,1513237378.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:58.463Z,1513237378.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:58.841Z,1513237378.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:58.899Z,1513237378.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:59.232Z,1513237379.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:59.267Z,1513237379.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:42:59.631Z,1513237379.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:42:59.646Z,1513237379.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:00.029Z,1513237380.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:00.044Z,1513237380.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:00.434Z,1513237380.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:00.455Z,1513237380.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:00.823Z,1513237380.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:00.857Z,1513237380.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:01.242Z,1513237381.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:01.261Z,1513237381.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:01.646Z,1513237381.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:01.667Z,1513237381.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:02.048Z,1513237382.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:02.062Z,1513237382.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:02.427Z,1513237382.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:02.452Z,1513237382.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:02.846Z,1513237382.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:02.860Z,1513237382.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:03.236Z,1513237383.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:03.318Z,1513237383.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:03.626Z,1513237383.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:03.660Z,1513237383.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:04.053Z,1513237384.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:04.068Z,1513237384.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:04.449Z,1513237384.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:04.463Z,1513237384.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:04.835Z,1513237384.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:04.852Z,1513237384.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:05.231Z,1513237385.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:05.246Z,1513237385.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:05.634Z,1513237385.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:05.648Z,1513237385.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:06.030Z,1513237386.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:06.053Z,1513237386.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:06.440Z,1513237386.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:06.468Z,1513237386.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:06.823Z,1513237386.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:06.860Z,1513237386.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:07.239Z,1513237387.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:07.291Z,1513237387.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:07.639Z,1513237387.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:07.660Z,1513237387.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:08.042Z,1513237388.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:08.058Z,1513237388.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:08.436Z,1513237388.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:08.451Z,1513237388.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:08.833Z,1513237388.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:08.927Z,1513237388.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:09.236Z,1513237389.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:09.252Z,1513237389.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:09.635Z,1513237389.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:09.656Z,1513237389.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:10.041Z,1513237390.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:10.063Z,1513237390.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:10.446Z,1513237390.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:10.461Z,1513237390.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:10.871Z,1513237390.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:10.931Z,1513237390.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:11.228Z,1513237391.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:11.259Z,1513237391.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:11.623Z,1513237391.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:11.662Z,1513237391.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:12.020Z,1513237392.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:12.035Z,1513237392.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:12.428Z,1513237392.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:12.458Z,1513237392.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:12.858Z,1513237392.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:12.886Z,1513237392.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:13.234Z,1513237393.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:13.248Z,1513237393.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:13.640Z,1513237393.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:13.659Z,1513237393.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:14.038Z,1513237394.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:14.059Z,1513237394.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:14.433Z,1513237394.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:14.448Z,1513237394.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:14.823Z,1513237394.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:14.849Z,1513237394.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:15.223Z,1513237395.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:15.262Z,1513237395.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:15.627Z,1513237395.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:15.654Z,1513237395.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:16.046Z,1513237396.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:16.074Z,1513237396.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:16.448Z,1513237396.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:16.467Z,1513237396.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:16.846Z,1513237396.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:16.875Z,1513237396.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:17.232Z,1513237397.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:17.259Z,1513237397.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:17.635Z,1513237397.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:17.650Z,1513237397.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:18.038Z,1513237398.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:18.053Z,1513237398.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:21.552Z,1513237401.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:21.654Z,1513237401.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:21.743Z,1513237401.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:21.787Z,1513237401.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:22.138Z,1513237402.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:22.224Z,1513237402.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:22.538Z,1513237402.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:22.552Z,1513237402.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:22.938Z,1513237402.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:22.987Z,1513237402.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:23.318Z,1513237403.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:23.351Z,1513237403.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:23.728Z,1513237403.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:23.742Z,1513237403.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:24.128Z,1513237404.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:24.143Z,1513237404.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:24.524Z,1513237404.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:24.543Z,1513237404.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:24.940Z,1513237404.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:24.960Z,1513237404.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:25.331Z,1513237405.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:25.346Z,1513237405.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:25.733Z,1513237405.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:25.749Z,1513237405.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:26.124Z,1513237406.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:26.138Z,1513237406.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:26.600Z,1513237406.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:26.619Z,1513237406.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:26.943Z,1513237406.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:26.958Z,1513237406.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:27.344Z,1513237407.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:27.363Z,1513237407.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:27.725Z,1513237407.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:27.763Z,1513237407.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:28.120Z,1513237408.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:28.150Z,1513237408.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:28.592Z,1513237408.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:28.618Z,1513237408.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:28.926Z,1513237408.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:28.963Z,1513237408.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:29.358Z,1513237409.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:29.402Z,1513237409.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:29.733Z,1513237409.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:29.766Z,1513237409.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:29.766Z,1513237409.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144
2017-12-14T07:43:29.767Z,1513237409.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:43:29.768Z,1513237409.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:29.768Z,1513237409.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 144
2017-12-14T07:43:29.768Z,1513237409.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:43:29.770Z,1513237409.770 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:29.770Z,1513237409.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2017-12-14T07:43:29.771Z,1513237409.771 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:43:29.782Z,1513237409.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:43:29.782Z,1513237409.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:43:29.783Z,1513237409.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:43:30.124Z,1513237410.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:30.169Z,1513237410.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:43:30.170Z,1513237410.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144
2017-12-14T07:43:30.170Z,1513237410.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:43:30.170Z,1513237410.170 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 144
2017-12-14T07:43:30.171Z,1513237410.171 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:43:30.171Z,1513237410.171 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2017-12-14T07:43:30.576Z,1513237410.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:30.597Z,1513237410.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:43:30.598Z,1513237410.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:43:30.598Z,1513237410.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:43:30.599Z,1513237410.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:43:30.599Z,1513237410.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:43:30.599Z,1513237410.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:43:30.600Z,1513237410.600 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:43:30.600Z,1513237410.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:43:30.600Z,1513237410.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:43:30.927Z,1513237410.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:30.955Z,1513237410.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:31.332Z,1513237411.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:31.386Z,1513237411.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:31.739Z,1513237411.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:31.759Z,1513237411.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:32.119Z,1513237412.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:32.147Z,1513237412.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:32.606Z,1513237412.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:32.662Z,1513237412.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:32.934Z,1513237412.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:32.949Z,1513237412.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:33.335Z,1513237413.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:33.356Z,1513237413.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:33.733Z,1513237413.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:33.755Z,1513237413.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:34.121Z,1513237414.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:34.136Z,1513237414.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:34.520Z,1513237414.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:34.535Z,1513237414.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:34.928Z,1513237414.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:34.948Z,1513237414.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:35.333Z,1513237415.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:35.348Z,1513237415.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:35.730Z,1513237415.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:35.744Z,1513237415.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:36.132Z,1513237416.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:36.147Z,1513237416.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:36.531Z,1513237416.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:36.550Z,1513237416.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:36.946Z,1513237416.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:36.971Z,1513237416.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:37.318Z,1513237417.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:37.330Z,1513237417.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:37.364Z,1513237417.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:37.738Z,1513237417.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:37.752Z,1513237417.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:38.114Z,1513237418.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:38.117Z,1513237418.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:38.148Z,1513237418.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:38.516Z,1513237418.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:38.543Z,1513237418.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:38.997Z,1513237418.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:39.053Z,1513237419.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:39.338Z,1513237419.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:39.363Z,1513237419.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:39.730Z,1513237419.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:39.752Z,1513237419.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:40.116Z,1513237420.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:40.151Z,1513237420.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:40.587Z,1513237420.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:40.616Z,1513237420.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:40.934Z,1513237420.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:40.963Z,1513237420.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:41.334Z,1513237421.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:41.365Z,1513237421.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:41.739Z,1513237421.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:41.769Z,1513237421.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:42.124Z,1513237422.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:42.139Z,1513237422.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:42.579Z,1513237422.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:42.619Z,1513237422.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:42.938Z,1513237422.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:42.954Z,1513237422.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:43.341Z,1513237423.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:43.407Z,1513237423.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:43.740Z,1513237423.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:43.799Z,1513237423.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:44.120Z,1513237424.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:44.153Z,1513237424.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:44.604Z,1513237424.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:44.620Z,1513237424.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:44.927Z,1513237424.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:44.994Z,1513237424.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:45.341Z,1513237425.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:45.355Z,1513237425.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:45.722Z,1513237425.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:45.789Z,1513237425.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:46.116Z,1513237426.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:46.191Z,1513237426.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:46.587Z,1513237426.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:46.611Z,1513237426.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:46.938Z,1513237426.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:46.953Z,1513237426.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:47.338Z,1513237427.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:47.354Z,1513237427.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:47.739Z,1513237427.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:47.759Z,1513237427.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:48.130Z,1513237428.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:48.145Z,1513237428.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:48.526Z,1513237428.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:48.619Z,1513237428.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:48.943Z,1513237428.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:48.964Z,1513237428.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:49.333Z,1513237429.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:49.369Z,1513237429.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:49.724Z,1513237429.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:49.755Z,1513237429.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:50.120Z,1513237430.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:50.152Z,1513237430.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:50.519Z,1513237430.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:50.553Z,1513237430.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:50.958Z,1513237430.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:50.973Z,1513237430.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:51.328Z,1513237431.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:51.346Z,1513237431.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:51.360Z,1513237431.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:51.726Z,1513237431.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:51.760Z,1513237431.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:52.120Z,1513237432.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:52.121Z,1513237432.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:52.154Z,1513237432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:52.551Z,1513237432.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:52.591Z,1513237432.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:52.940Z,1513237432.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:52.985Z,1513237432.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:53.334Z,1513237433.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:53.348Z,1513237433.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:53.734Z,1513237433.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:53.748Z,1513237433.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:54.130Z,1513237434.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:54.182Z,1513237434.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:54.583Z,1513237434.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:54.598Z,1513237434.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:54.943Z,1513237434.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:54.959Z,1513237434.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:55.338Z,1513237435.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:55.359Z,1513237435.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:55.763Z,1513237435.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:55.800Z,1513237435.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:56.138Z,1513237436.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:56.153Z,1513237436.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:56.592Z,1513237436.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:56.615Z,1513237436.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:56.933Z,1513237436.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:56.969Z,1513237436.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:57.340Z,1513237437.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:57.356Z,1513237437.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:57.726Z,1513237437.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:57.759Z,1513237437.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:58.119Z,1513237438.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:58.152Z,1513237438.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:58.601Z,1513237438.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:58.615Z,1513237438.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:58.954Z,1513237438.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:58.985Z,1513237438.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:59.357Z,1513237439.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:59.372Z,1513237439.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:43:59.733Z,1513237439.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:43:59.763Z,1513237439.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:00.124Z,1513237440.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:00.160Z,1513237440.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:00.596Z,1513237440.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:00.615Z,1513237440.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:00.933Z,1513237440.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:01.032Z,1513237441.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:01.334Z,1513237441.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:01.358Z,1513237441.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:01.737Z,1513237441.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:01.767Z,1513237441.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:02.137Z,1513237442.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:02.168Z,1513237442.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:02.523Z,1513237442.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:02.583Z,1513237442.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:02.935Z,1513237442.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:02.951Z,1513237442.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:03.338Z,1513237443.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:03.359Z,1513237443.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:03.738Z,1513237443.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:03.759Z,1513237443.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:04.131Z,1513237444.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:04.146Z,1513237444.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:04.516Z,1513237444.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:04.548Z,1513237444.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:04.947Z,1513237444.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:04.979Z,1513237444.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:05.365Z,1513237445.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:05.408Z,1513237445.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:05.734Z,1513237445.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:05.799Z,1513237445.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:06.124Z,1513237446.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:06.180Z,1513237446.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:06.523Z,1513237446.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:06.559Z,1513237446.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:06.950Z,1513237446.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:06.975Z,1513237446.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:07.347Z,1513237447.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:07.403Z,1513237447.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:07.733Z,1513237447.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:07.763Z,1513237447.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:08.124Z,1513237448.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:08.178Z,1513237448.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:08.599Z,1513237448.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:08.651Z,1513237448.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:08.950Z,1513237448.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:08.965Z,1513237448.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:09.345Z,1513237449.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:09.360Z,1513237449.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:09.739Z,1513237449.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:09.753Z,1513237449.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:10.115Z,1513237450.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:10.151Z,1513237450.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:10.583Z,1513237450.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:10.606Z,1513237450.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:10.935Z,1513237450.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:10.962Z,1513237450.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:11.343Z,1513237451.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:11.363Z,1513237451.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:11.739Z,1513237451.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:11.754Z,1513237451.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:12.116Z,1513237452.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:12.155Z,1513237452.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:12.581Z,1513237452.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:12.608Z,1513237452.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:12.944Z,1513237452.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:12.960Z,1513237452.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:13.334Z,1513237453.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:13.361Z,1513237453.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:13.738Z,1513237453.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:13.752Z,1513237453.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:14.122Z,1513237454.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:14.151Z,1513237454.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:14.599Z,1513237454.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:14.619Z,1513237454.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:14.953Z,1513237454.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:14.988Z,1513237454.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:15.329Z,1513237455.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:15.356Z,1513237455.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:15.729Z,1513237455.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:15.763Z,1513237455.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:16.118Z,1513237456.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:16.132Z,1513237456.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:16.524Z,1513237456.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:16.616Z,1513237456.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:16.934Z,1513237456.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:16.959Z,1513237456.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:17.330Z,1513237457.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:17.345Z,1513237457.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:17.730Z,1513237457.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:17.745Z,1513237457.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:18.155Z,1513237458.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:18.182Z,1513237458.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:21.695Z,1513237461.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:21.724Z,1513237461.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:21.830Z,1513237461.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:21.870Z,1513237461.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:22.195Z,1513237462.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:22.222Z,1513237462.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:22.602Z,1513237462.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:22.628Z,1513237462.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:22.982Z,1513237462.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:23.018Z,1513237463.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:23.382Z,1513237463.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:23.410Z,1513237463.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:23.784Z,1513237463.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:23.800Z,1513237463.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:24.195Z,1513237464.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:24.215Z,1513237464.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:24.597Z,1513237464.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:24.655Z,1513237464.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:25.002Z,1513237465.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:25.018Z,1513237465.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:25.372Z,1513237465.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:25.407Z,1513237465.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:25.775Z,1513237465.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:25.800Z,1513237465.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:26.176Z,1513237466.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:26.204Z,1513237466.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:26.600Z,1513237466.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:26.619Z,1513237466.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:27.005Z,1513237467.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:27.020Z,1513237467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:27.400Z,1513237467.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:27.415Z,1513237467.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:27.819Z,1513237467.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:27.847Z,1513237467.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:28.176Z,1513237468.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:28.208Z,1513237468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:28.594Z,1513237468.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:28.694Z,1513237468.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:28.983Z,1513237468.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:29.006Z,1513237469.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:29.379Z,1513237469.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:29.427Z,1513237469.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:29.779Z,1513237469.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:29.807Z,1513237469.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:30.186Z,1513237470.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:30.235Z,1513237470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:30.639Z,1513237470.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:30.681Z,1513237470.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:31.010Z,1513237471.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:31.050Z,1513237471.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:31.396Z,1513237471.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:31.412Z,1513237471.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:31.784Z,1513237471.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:31.798Z,1513237471.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:32.187Z,1513237472.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:32.202Z,1513237472.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:32.571Z,1513237472.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:32.602Z,1513237472.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:33.018Z,1513237473.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:33.147Z,1513237473.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:33.388Z,1513237473.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:33.402Z,1513237473.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:33.795Z,1513237473.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:33.810Z,1513237473.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:34.171Z,1513237474.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:34.258Z,1513237474.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:34.579Z,1513237474.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:34.605Z,1513237474.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:34.980Z,1513237474.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:35.012Z,1513237475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:35.376Z,1513237475.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:35.406Z,1513237475.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:35.779Z,1513237475.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:35.806Z,1513237475.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:36.195Z,1513237476.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:36.216Z,1513237476.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:36.604Z,1513237476.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:36.619Z,1513237476.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:37.004Z,1513237477.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:37.039Z,1513237477.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:37.421Z,1513237477.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:37.451Z,1513237477.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:37.781Z,1513237477.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:37.796Z,1513237477.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:38.182Z,1513237478.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:38.197Z,1513237478.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:38.597Z,1513237478.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:38.663Z,1513237478.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:38.994Z,1513237478.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:39.029Z,1513237479.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:39.387Z,1513237479.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:39.403Z,1513237479.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:39.794Z,1513237479.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:39.936Z,1513237479.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:40.181Z,1513237480.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:40.196Z,1513237480.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:40.625Z,1513237480.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:40.684Z,1513237480.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:40.984Z,1513237480.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:41.003Z,1513237481.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:41.385Z,1513237481.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:41.400Z,1513237481.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:41.782Z,1513237481.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:41.796Z,1513237481.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:42.186Z,1513237482.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:42.201Z,1513237482.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:42.602Z,1513237482.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:42.633Z,1513237482.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:42.990Z,1513237482.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:43.005Z,1513237483.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:43.384Z,1513237483.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:43.403Z,1513237483.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:43.779Z,1513237483.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:43.858Z,1513237483.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:44.182Z,1513237484.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:44.203Z,1513237484.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:44.636Z,1513237484.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:44.664Z,1513237484.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:44.998Z,1513237484.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:45.017Z,1513237485.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:45.395Z,1513237485.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:45.431Z,1513237485.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:45.802Z,1513237485.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:45.823Z,1513237485.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:46.176Z,1513237486.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:46.205Z,1513237486.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:46.575Z,1513237486.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:46.602Z,1513237486.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:47.027Z,1513237487.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:47.056Z,1513237487.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:47.372Z,1513237487.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:47.403Z,1513237487.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:47.775Z,1513237487.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:47.815Z,1513237487.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:48.186Z,1513237488.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:48.214Z,1513237488.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:48.586Z,1513237488.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:48.619Z,1513237488.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:48.986Z,1513237488.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:49.025Z,1513237489.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:49.380Z,1513237489.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:49.395Z,1513237489.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:49.777Z,1513237489.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:49.792Z,1513237489.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:50.176Z,1513237490.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:50.199Z,1513237490.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:50.587Z,1513237490.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:50.671Z,1513237490.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:50.999Z,1513237490.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:51.035Z,1513237491.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:51.393Z,1513237491.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:51.443Z,1513237491.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:51.792Z,1513237491.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:51.807Z,1513237491.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:52.178Z,1513237492.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:52.239Z,1513237492.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:52.599Z,1513237492.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:52.619Z,1513237492.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:52.991Z,1513237492.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:53.006Z,1513237493.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:53.394Z,1513237493.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:53.437Z,1513237493.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:53.771Z,1513237493.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:53.808Z,1513237493.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:54.195Z,1513237494.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:54.210Z,1513237494.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:54.603Z,1513237494.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:54.618Z,1513237494.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:55.009Z,1513237495.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:55.024Z,1513237495.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:55.376Z,1513237495.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:55.408Z,1513237495.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:55.775Z,1513237495.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:55.816Z,1513237495.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:56.171Z,1513237496.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:56.207Z,1513237496.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:56.628Z,1513237496.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:56.667Z,1513237496.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:57.008Z,1513237497.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:57.027Z,1513237497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:57.399Z,1513237497.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:57.414Z,1513237497.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:57.786Z,1513237497.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:57.817Z,1513237497.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:58.176Z,1513237498.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:58.206Z,1513237498.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:58.628Z,1513237498.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:58.674Z,1513237498.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:58.979Z,1513237498.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:59.015Z,1513237499.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:59.376Z,1513237499.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:59.415Z,1513237499.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:44:59.776Z,1513237499.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:44:59.866Z,1513237499.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:00.183Z,1513237500.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:00.206Z,1513237500.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:00.591Z,1513237500.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:00.643Z,1513237500.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:00.999Z,1513237500.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:01.029Z,1513237501.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:01.383Z,1513237501.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:01.423Z,1513237501.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:01.788Z,1513237501.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:01.825Z,1513237501.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:02.184Z,1513237502.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:02.199Z,1513237502.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:02.582Z,1513237502.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:02.597Z,1513237502.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:03.044Z,1513237503.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:03.063Z,1513237503.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:03.394Z,1513237503.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:03.416Z,1513237503.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:03.782Z,1513237503.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:03.811Z,1513237503.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:04.176Z,1513237504.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:04.211Z,1513237504.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:04.598Z,1513237504.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:04.615Z,1513237504.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:04.995Z,1513237504.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:05.015Z,1513237505.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:05.373Z,1513237505.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:05.405Z,1513237505.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:05.776Z,1513237505.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:05.802Z,1513237505.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:06.222Z,1513237506.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:06.245Z,1513237506.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:06.600Z,1513237506.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:06.625Z,1513237506.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:06.998Z,1513237506.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:07.013Z,1513237507.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:07.378Z,1513237507.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:07.411Z,1513237507.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:07.771Z,1513237507.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:07.808Z,1513237507.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:08.176Z,1513237508.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:08.204Z,1513237508.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:08.597Z,1513237508.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:08.622Z,1513237508.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:08.994Z,1513237508.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:09.025Z,1513237509.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:09.429Z,1513237509.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:09.497Z,1513237509.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:09.799Z,1513237509.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:09.814Z,1513237509.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:10.172Z,1513237510.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:10.203Z,1513237510.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:10.596Z,1513237510.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:10.624Z,1513237510.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:10.975Z,1513237510.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:11.015Z,1513237511.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:11.375Z,1513237511.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:11.398Z,1513237511.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:11.775Z,1513237511.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:11.790Z,1513237511.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:12.205Z,1513237512.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:12.220Z,1513237512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:12.672Z,1513237512.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:12.802Z,1513237512.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:12.991Z,1513237512.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:13.010Z,1513237513.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:13.379Z,1513237513.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:13.447Z,1513237513.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:13.775Z,1513237513.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:13.801Z,1513237513.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:14.173Z,1513237514.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:14.223Z,1513237514.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:14.576Z,1513237514.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:14.610Z,1513237514.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:15.011Z,1513237515.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:15.031Z,1513237515.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:15.395Z,1513237515.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:15.415Z,1513237515.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:15.782Z,1513237515.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:15.815Z,1513237515.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:16.179Z,1513237516.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:16.208Z,1513237516.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:16.571Z,1513237516.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:16.610Z,1513237516.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:16.973Z,1513237516.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:17.015Z,1513237517.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:17.372Z,1513237517.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:17.408Z,1513237517.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:17.771Z,1513237517.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:17.807Z,1513237517.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:18.182Z,1513237518.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:18.222Z,1513237518.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:21.649Z,1513237521.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:21.664Z,1513237521.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:21.775Z,1513237521.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:21.802Z,1513237521.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:22.116Z,1513237522.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:22.135Z,1513237522.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:22.578Z,1513237522.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:22.640Z,1513237522.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:22.923Z,1513237522.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:22.939Z,1513237522.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:23.311Z,1513237523.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:23.342Z,1513237523.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:23.724Z,1513237523.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:23.738Z,1513237523.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:24.122Z,1513237524.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:24.153Z,1513237524.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:24.583Z,1513237524.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:24.613Z,1513237524.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:24.926Z,1513237524.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:24.941Z,1513237524.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:25.319Z,1513237525.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:25.334Z,1513237525.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:25.720Z,1513237525.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:25.739Z,1513237525.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:26.123Z,1513237526.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:26.137Z,1513237526.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:26.516Z,1513237526.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:26.579Z,1513237526.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:26.931Z,1513237526.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:26.970Z,1513237526.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:27.329Z,1513237527.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:27.358Z,1513237527.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:27.726Z,1513237527.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:27.762Z,1513237527.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:28.119Z,1513237528.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:28.139Z,1513237528.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:28.561Z,1513237528.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:28.575Z,1513237528.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:28.942Z,1513237528.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:28.975Z,1513237528.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:29.328Z,1513237529.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:29.344Z,1513237529.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:29.734Z,1513237529.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:29.749Z,1513237529.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:30.122Z,1513237530.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:30.143Z,1513237530.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:30.525Z,1513237530.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:30.540Z,1513237530.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:30.950Z,1513237530.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:30.975Z,1513237530.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:31.329Z,1513237531.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:31.345Z,1513237531.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:31.789Z,1513237531.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:31.816Z,1513237531.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:32.111Z,1513237532.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:32.147Z,1513237532.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:32.577Z,1513237532.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:32.616Z,1513237532.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:32.923Z,1513237532.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:32.960Z,1513237532.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:33.321Z,1513237533.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:33.336Z,1513237533.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:33.718Z,1513237533.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:33.734Z,1513237533.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:34.133Z,1513237534.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:34.172Z,1513237534.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:34.587Z,1513237534.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:34.670Z,1513237534.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:34.922Z,1513237534.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:35.007Z,1513237535.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:35.328Z,1513237535.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:35.396Z,1513237535.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:35.738Z,1513237535.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:35.797Z,1513237535.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:36.114Z,1513237536.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:36.168Z,1513237536.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:36.577Z,1513237536.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:36.608Z,1513237536.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:36.933Z,1513237536.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:36.983Z,1513237536.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:37.330Z,1513237537.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:37.346Z,1513237537.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:37.725Z,1513237537.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:37.747Z,1513237537.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:38.161Z,1513237538.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:38.180Z,1513237538.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:38.581Z,1513237538.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:38.618Z,1513237538.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:38.936Z,1513237538.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:38.974Z,1513237538.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:39.325Z,1513237539.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:39.340Z,1513237539.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:39.734Z,1513237539.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:39.764Z,1513237539.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:40.121Z,1513237540.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:40.136Z,1513237540.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:40.521Z,1513237540.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:40.535Z,1513237540.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:40.925Z,1513237540.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:40.942Z,1513237540.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:41.364Z,1513237541.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:41.388Z,1513237541.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:41.729Z,1513237541.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:41.751Z,1513237541.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:42.122Z,1513237542.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:42.143Z,1513237542.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:42.524Z,1513237542.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:42.539Z,1513237542.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:42.966Z,1513237542.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:42.981Z,1513237542.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:43.329Z,1513237543.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:43.344Z,1513237543.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:43.728Z,1513237543.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:43.743Z,1513237543.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:44.121Z,1513237544.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:44.136Z,1513237544.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:44.560Z,1513237544.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:44.627Z,1513237544.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:44.946Z,1513237544.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:44.974Z,1513237544.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:45.327Z,1513237545.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:45.363Z,1513237545.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:45.730Z,1513237545.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:45.747Z,1513237545.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:46.124Z,1513237546.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:46.139Z,1513237546.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:46.585Z,1513237546.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:46.630Z,1513237546.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:46.943Z,1513237546.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:46.966Z,1513237546.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:47.334Z,1513237547.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:47.349Z,1513237547.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:47.745Z,1513237547.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:47.784Z,1513237547.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:48.123Z,1513237548.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:48.143Z,1513237548.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:48.585Z,1513237548.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:48.624Z,1513237548.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:48.942Z,1513237548.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:48.958Z,1513237548.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:49.339Z,1513237549.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:49.354Z,1513237549.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:49.734Z,1513237549.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:49.748Z,1513237549.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:50.129Z,1513237550.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:50.144Z,1513237550.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:50.569Z,1513237550.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:50.605Z,1513237550.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:50.961Z,1513237550.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:50.996Z,1513237550.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:51.326Z,1513237551.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:51.347Z,1513237551.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:51.734Z,1513237551.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:51.748Z,1513237551.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:52.126Z,1513237552.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:52.141Z,1513237552.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:52.572Z,1513237552.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:52.631Z,1513237552.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:52.943Z,1513237552.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:52.958Z,1513237552.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:53.338Z,1513237553.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:53.354Z,1513237553.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:53.738Z,1513237553.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:53.759Z,1513237553.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:54.127Z,1513237554.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:54.159Z,1513237554.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:54.516Z,1513237554.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:54.614Z,1513237554.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:54.938Z,1513237554.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:54.962Z,1513237554.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:55.334Z,1513237555.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:55.349Z,1513237555.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:55.729Z,1513237555.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:55.743Z,1513237555.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:56.115Z,1513237556.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:56.147Z,1513237556.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:56.515Z,1513237556.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:56.567Z,1513237556.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:56.941Z,1513237556.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:57.040Z,1513237557.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:57.335Z,1513237557.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:57.364Z,1513237557.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:57.723Z,1513237557.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:57.771Z,1513237557.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:58.113Z,1513237558.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:58.127Z,1513237558.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:58.512Z,1513237558.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:58.564Z,1513237558.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:58.943Z,1513237558.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:58.964Z,1513237558.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:59.325Z,1513237559.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:59.355Z,1513237559.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:45:59.730Z,1513237559.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:45:59.763Z,1513237559.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:00.112Z,1513237560.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:00.132Z,1513237560.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:00.603Z,1513237560.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:00.643Z,1513237560.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:00.926Z,1513237560.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:00.964Z,1513237560.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:01.333Z,1513237561.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:01.364Z,1513237561.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:01.733Z,1513237561.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:01.747Z,1513237561.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:02.122Z,1513237562.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:02.137Z,1513237562.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:02.578Z,1513237562.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:02.603Z,1513237562.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:02.930Z,1513237562.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:02.945Z,1513237562.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:03.337Z,1513237563.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:03.351Z,1513237563.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:03.731Z,1513237563.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:03.746Z,1513237563.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:04.128Z,1513237564.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:04.153Z,1513237564.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:04.577Z,1513237564.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:04.626Z,1513237564.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:04.930Z,1513237564.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:04.963Z,1513237564.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:05.329Z,1513237565.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:05.343Z,1513237565.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:05.726Z,1513237565.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:05.740Z,1513237565.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:06.122Z,1513237566.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:06.137Z,1513237566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:06.575Z,1513237566.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:06.616Z,1513237566.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:06.926Z,1513237566.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:06.944Z,1513237566.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:07.333Z,1513237567.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:07.348Z,1513237567.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:07.739Z,1513237567.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:07.783Z,1513237567.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:08.123Z,1513237568.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:08.138Z,1513237568.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:08.522Z,1513237568.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:08.643Z,1513237568.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:08.938Z,1513237568.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:08.968Z,1513237568.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:09.326Z,1513237569.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:09.340Z,1513237569.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:09.726Z,1513237569.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:09.741Z,1513237569.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:10.125Z,1513237570.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:10.140Z,1513237570.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:10.526Z,1513237570.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:10.541Z,1513237570.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:10.944Z,1513237570.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:10.966Z,1513237570.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:11.341Z,1513237571.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:11.355Z,1513237571.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:11.730Z,1513237571.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:11.746Z,1513237571.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:12.122Z,1513237572.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:12.136Z,1513237572.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:12.526Z,1513237572.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:12.541Z,1513237572.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:12.938Z,1513237572.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:12.971Z,1513237572.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:13.332Z,1513237573.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:13.367Z,1513237573.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:13.727Z,1513237573.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:13.764Z,1513237573.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:14.132Z,1513237574.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:14.157Z,1513237574.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:14.557Z,1513237574.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:14.582Z,1513237574.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:14.921Z,1513237574.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:14.960Z,1513237574.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:15.328Z,1513237575.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:15.360Z,1513237575.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:15.726Z,1513237575.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:15.755Z,1513237575.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:16.119Z,1513237576.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:16.155Z,1513237576.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:16.582Z,1513237576.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:16.630Z,1513237576.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:16.930Z,1513237576.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:16.956Z,1513237576.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:17.333Z,1513237577.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:17.363Z,1513237577.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:17.735Z,1513237577.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:17.832Z,1513237577.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:18.122Z,1513237578.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:18.137Z,1513237578.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:18.581Z,1513237578.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:18.651Z,1513237578.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:25.089Z,1513237585.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:25.125Z,1513237585.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:25.259Z,1513237585.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:25.340Z,1513237585.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:25.640Z,1513237585.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:25.660Z,1513237585.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:26.054Z,1513237586.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:26.119Z,1513237586.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:26.446Z,1513237586.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:26.478Z,1513237586.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:26.884Z,1513237586.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:26.947Z,1513237586.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:27.242Z,1513237587.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:27.259Z,1513237587.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:27.646Z,1513237587.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:27.699Z,1513237587.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:28.063Z,1513237588.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:28.123Z,1513237588.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:28.419Z,1513237588.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:28.433Z,1513237588.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:28.850Z,1513237588.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:28.872Z,1513237588.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:29.232Z,1513237589.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:29.284Z,1513237589.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:29.628Z,1513237589.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:29.642Z,1513237589.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.043Z,1513237590.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:30.075Z,1513237590.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.442Z,1513237590.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:30.475Z,1513237590.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.863Z,1513237590.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:30.919Z,1513237590.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.919Z,1513237590.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145
2017-12-14T07:46:30.919Z,1513237590.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:46:30.920Z,1513237590.920 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.929Z,1513237590.929 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 145
2017-12-14T07:46:30.929Z,1513237590.929 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:46:30.931Z,1513237590.931 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:30.931Z,1513237590.931 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2017-12-14T07:46:30.931Z,1513237590.931 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:46:30.988Z,1513237590.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:46:30.988Z,1513237590.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:46:30.988Z,1513237590.988 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:46:31.240Z,1513237591.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:31.287Z,1513237591.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:46:31.287Z,1513237591.287 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145
2017-12-14T07:46:31.287Z,1513237591.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:46:31.287Z,1513237591.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 145
2017-12-14T07:46:31.288Z,1513237591.288 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:46:31.288Z,1513237591.288 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2017-12-14T07:46:31.659Z,1513237591.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:31.696Z,1513237591.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:46:31.697Z,1513237591.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:46:31.698Z,1513237591.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:46:31.698Z,1513237591.698 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:46:31.698Z,1513237591.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:46:31.699Z,1513237591.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:46:31.699Z,1513237591.699 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:46:31.699Z,1513237591.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:46:31.700Z,1513237591.700 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:46:32.032Z,1513237592.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:32.093Z,1513237592.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:32.446Z,1513237592.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:32.486Z,1513237592.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:32.819Z,1513237592.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:32.843Z,1513237592.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:33.244Z,1513237593.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:33.294Z,1513237593.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:33.652Z,1513237593.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:33.692Z,1513237593.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:34.044Z,1513237594.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:34.083Z,1513237594.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:34.462Z,1513237594.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:34.569Z,1513237594.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:34.829Z,1513237594.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:34.867Z,1513237594.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:35.246Z,1513237595.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:35.271Z,1513237595.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:35.620Z,1513237595.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:35.688Z,1513237595.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:36.052Z,1513237596.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:36.123Z,1513237596.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:36.458Z,1513237596.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:36.508Z,1513237596.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:36.838Z,1513237596.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:36.853Z,1513237596.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:37.233Z,1513237597.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:37.285Z,1513237597.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:37.633Z,1513237597.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:37.680Z,1513237597.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:38.031Z,1513237598.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:38.075Z,1513237598.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:38.432Z,1513237598.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:38.455Z,1513237598.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:38.883Z,1513237598.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:38.940Z,1513237598.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:39.249Z,1513237599.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:39.314Z,1513237599.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:39.648Z,1513237599.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:39.668Z,1513237599.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:40.075Z,1513237600.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:40.102Z,1513237600.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:40.126Z,1513237600.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:40.420Z,1513237600.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:40.468Z,1513237600.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:40.820Z,1513237600.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:40.922Z,1513237600.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:40.961Z,1513237600.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:41.231Z,1513237601.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:41.256Z,1513237601.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:41.330Z,1513237601.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:41.632Z,1513237601.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:41.655Z,1513237601.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:42.035Z,1513237602.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:42.060Z,1513237602.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:42.443Z,1513237602.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:42.467Z,1513237602.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:42.844Z,1513237602.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:42.883Z,1513237602.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:43.225Z,1513237603.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:43.264Z,1513237603.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:43.659Z,1513237603.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:43.683Z,1513237603.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:44.039Z,1513237604.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:44.086Z,1513237604.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:44.422Z,1513237604.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:44.514Z,1513237604.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:44.819Z,1513237604.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:44.839Z,1513237604.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:45.237Z,1513237605.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:45.291Z,1513237605.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:45.633Z,1513237605.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:45.667Z,1513237605.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:46.038Z,1513237606.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:46.062Z,1513237606.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:46.425Z,1513237606.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:46.488Z,1513237606.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:46.818Z,1513237606.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:46.846Z,1513237606.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:47.220Z,1513237607.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:47.251Z,1513237607.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:47.640Z,1513237607.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:47.694Z,1513237607.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:48.042Z,1513237608.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:48.059Z,1513237608.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:48.438Z,1513237608.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:48.541Z,1513237608.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:48.850Z,1513237608.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:48.865Z,1513237608.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:49.227Z,1513237609.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:49.259Z,1513237609.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:49.626Z,1513237609.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:49.649Z,1513237609.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:50.026Z,1513237610.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:50.040Z,1513237610.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:50.422Z,1513237610.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:50.436Z,1513237610.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:50.830Z,1513237610.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:50.845Z,1513237610.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:51.242Z,1513237611.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:51.265Z,1513237611.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:51.637Z,1513237611.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:51.671Z,1513237611.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:52.038Z,1513237612.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:52.052Z,1513237612.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:52.430Z,1513237612.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:52.444Z,1513237612.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:52.821Z,1513237612.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:52.925Z,1513237612.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:53.229Z,1513237613.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:53.252Z,1513237613.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:53.624Z,1513237613.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:53.651Z,1513237613.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:54.042Z,1513237614.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:54.063Z,1513237614.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:54.446Z,1513237614.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:54.462Z,1513237614.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:54.881Z,1513237614.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:54.946Z,1513237614.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:55.223Z,1513237615.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:55.263Z,1513237615.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:55.627Z,1513237615.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:55.667Z,1513237615.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:56.028Z,1513237616.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:56.042Z,1513237616.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:56.105Z,1513237616.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:56.424Z,1513237616.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:56.440Z,1513237616.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:56.819Z,1513237616.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:56.902Z,1513237616.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:56.919Z,1513237616.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:57.243Z,1513237617.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:57.257Z,1513237617.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:57.305Z,1513237617.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:57.645Z,1513237617.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:57.667Z,1513237617.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:58.030Z,1513237618.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:58.056Z,1513237618.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:58.419Z,1513237618.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:58.451Z,1513237618.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:58.823Z,1513237618.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:58.838Z,1513237618.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:59.228Z,1513237619.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:59.243Z,1513237619.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:46:59.628Z,1513237619.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:46:59.647Z,1513237619.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:00.037Z,1513237620.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:00.088Z,1513237620.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:00.449Z,1513237620.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:00.479Z,1513237620.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:00.834Z,1513237620.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:00.855Z,1513237620.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:01.227Z,1513237621.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:01.243Z,1513237621.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:01.630Z,1513237621.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:01.645Z,1513237621.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:02.031Z,1513237622.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:02.076Z,1513237622.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:02.426Z,1513237622.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:02.453Z,1513237622.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:02.819Z,1513237622.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:02.855Z,1513237622.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:03.265Z,1513237623.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:03.312Z,1513237623.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:03.652Z,1513237623.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:03.668Z,1513237623.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:04.038Z,1513237624.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:04.063Z,1513237624.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:04.427Z,1513237624.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:04.441Z,1513237624.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:04.856Z,1513237624.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:04.871Z,1513237624.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:05.232Z,1513237625.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:05.264Z,1513237625.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:05.627Z,1513237625.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:05.641Z,1513237625.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:06.038Z,1513237626.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:06.072Z,1513237626.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:06.489Z,1513237626.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:06.524Z,1513237626.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:06.887Z,1513237626.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:06.945Z,1513237626.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:07.261Z,1513237627.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:07.287Z,1513237627.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:07.639Z,1513237627.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:07.698Z,1513237627.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:08.031Z,1513237628.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:08.046Z,1513237628.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:08.125Z,1513237628.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:08.420Z,1513237628.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:08.484Z,1513237628.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:08.863Z,1513237628.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:08.918Z,1513237628.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:08.922Z,1513237628.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:09.237Z,1513237629.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:09.287Z,1513237629.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:09.325Z,1513237629.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:09.651Z,1513237629.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:09.674Z,1513237629.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:10.043Z,1513237630.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:10.067Z,1513237630.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:10.429Z,1513237630.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:10.444Z,1513237630.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:10.815Z,1513237630.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:10.842Z,1513237630.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:11.224Z,1513237631.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:11.259Z,1513237631.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:11.627Z,1513237631.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:11.654Z,1513237631.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:12.031Z,1513237632.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:12.068Z,1513237632.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:12.448Z,1513237632.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:12.463Z,1513237632.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:12.839Z,1513237632.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:12.894Z,1513237632.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:13.228Z,1513237633.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:13.247Z,1513237633.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:13.627Z,1513237633.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:13.650Z,1513237633.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:14.034Z,1513237634.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:14.049Z,1513237634.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:14.430Z,1513237634.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:14.453Z,1513237634.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:14.819Z,1513237634.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:14.856Z,1513237634.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:15.243Z,1513237635.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:15.268Z,1513237635.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:15.643Z,1513237635.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:15.657Z,1513237635.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:16.058Z,1513237636.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:16.089Z,1513237636.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:16.426Z,1513237636.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:16.440Z,1513237636.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:16.819Z,1513237636.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:16.856Z,1513237636.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:17.224Z,1513237637.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:17.251Z,1513237637.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:17.619Z,1513237637.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:17.669Z,1513237637.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:17.672Z,1513237637.672 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:42:17.4Z
2017-12-14T07:47:17.672Z,1513237637.672 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:47:17.672Z,1513237637.672 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:47:18.040Z,1513237638.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:18.063Z,1513237638.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:28.453Z,1513237648.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:28.628Z,1513237648.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:28.736Z,1513237648.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:28.779Z,1513237648.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:32.287Z,1513237652.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:32.335Z,1513237652.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:32.417Z,1513237652.417 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0168.lzma
2017-12-14T07:47:32.444Z,1513237652.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:32.469Z,1513237652.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:32.810Z,1513237652.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:32.855Z,1513237652.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:33.177Z,1513237653.177 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0168.lzma.bak
2017-12-14T07:47:33.177Z,1513237653.177 [DataOverHttps](INFO): SBD MOMSN=5438265
2017-12-14T07:47:33.240Z,1513237653.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:33.254Z,1513237653.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:34.455Z,1513237654.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:34.475Z,1513237654.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:34.580Z,1513237654.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:34.623Z,1513237654.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:38.054Z,1513237658.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:38.068Z,1513237658.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:38.164Z,1513237658.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:38.210Z,1513237658.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:38.602Z,1513237658.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:38.633Z,1513237658.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:38.930Z,1513237658.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:38.953Z,1513237658.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:39.338Z,1513237659.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:39.352Z,1513237659.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:39.730Z,1513237659.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:39.744Z,1513237659.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:43.399Z,1513237663.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:43.452Z,1513237663.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:43.531Z,1513237663.531 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0169.lzma
2017-12-14T07:47:43.558Z,1513237663.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:43.588Z,1513237663.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:43.918Z,1513237663.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:43.959Z,1513237663.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:44.284Z,1513237664.284 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0169.lzma.bak
2017-12-14T07:47:44.284Z,1513237664.284 [DataOverHttps](INFO): SBD MOMSN=5438267
2017-12-14T07:47:44.342Z,1513237664.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:44.364Z,1513237664.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:45.506Z,1513237665.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:45.524Z,1513237665.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:45.551Z,1513237665.551 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:47:45.551Z,1513237665.551 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:47:45.551Z,1513237665.551 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:47:45.627Z,1513237665.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:45.651Z,1513237665.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:49.099Z,1513237669.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:49.114Z,1513237669.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:49.216Z,1513237669.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:49.235Z,1513237669.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:49.583Z,1513237669.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:49.617Z,1513237669.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:49.000Z,1513237670.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:50.031Z,1513237670.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:50.381Z,1513237670.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:50.396Z,1513237670.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:50.778Z,1513237670.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:50.793Z,1513237670.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:51.177Z,1513237671.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:51.203Z,1513237671.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:51.578Z,1513237671.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:51.600Z,1513237671.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:51.987Z,1513237671.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:52.010Z,1513237672.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:52.388Z,1513237672.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:52.413Z,1513237672.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:52.790Z,1513237672.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:52.814Z,1513237672.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:53.174Z,1513237673.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:53.199Z,1513237673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:53.574Z,1513237673.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:53.602Z,1513237673.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:54.003Z,1513237674.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:54.172Z,1513237674.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:54.382Z,1513237674.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:54.397Z,1513237674.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:54.792Z,1513237674.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:54.881Z,1513237674.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:55.178Z,1513237675.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:55.192Z,1513237675.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:55.582Z,1513237675.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:55.620Z,1513237675.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:55.981Z,1513237675.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:56.008Z,1513237676.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:56.367Z,1513237676.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:56.394Z,1513237676.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:56.767Z,1513237676.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:56.792Z,1513237676.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:57.164Z,1513237677.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:57.205Z,1513237677.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:57.583Z,1513237677.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:57.599Z,1513237677.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:57.993Z,1513237677.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:58.015Z,1513237678.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:58.387Z,1513237678.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:58.411Z,1513237678.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:58.790Z,1513237678.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:58.808Z,1513237678.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:59.170Z,1513237679.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:59.203Z,1513237679.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:59.569Z,1513237679.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:59.596Z,1513237679.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:47:59.965Z,1513237679.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:47:59.994Z,1513237679.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:00.390Z,1513237680.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:00.442Z,1513237680.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:00.769Z,1513237680.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:00.795Z,1513237680.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:01.192Z,1513237681.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:01.208Z,1513237681.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:01.593Z,1513237681.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:01.615Z,1513237681.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:01.986Z,1513237681.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:02.007Z,1513237682.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:02.381Z,1513237682.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:02.396Z,1513237682.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:02.782Z,1513237682.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:02.797Z,1513237682.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:03.168Z,1513237683.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:03.194Z,1513237683.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:03.564Z,1513237683.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:03.598Z,1513237683.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:03.979Z,1513237683.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:04.043Z,1513237684.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:04.377Z,1513237684.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:04.405Z,1513237684.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:04.779Z,1513237684.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:04.807Z,1513237684.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:05.178Z,1513237685.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:05.209Z,1513237685.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:05.568Z,1513237685.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:05.583Z,1513237685.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:05.974Z,1513237685.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:06.003Z,1513237686.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:06.377Z,1513237686.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:06.392Z,1513237686.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:06.799Z,1513237686.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:06.834Z,1513237686.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:07.197Z,1513237687.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:07.212Z,1513237687.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:07.590Z,1513237687.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:07.605Z,1513237687.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:07.986Z,1513237687.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:08.003Z,1513237688.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:08.364Z,1513237688.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:08.401Z,1513237688.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:08.781Z,1513237688.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:08.803Z,1513237688.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:09.182Z,1513237689.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:09.196Z,1513237689.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:09.581Z,1513237689.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:09.595Z,1513237689.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:10.001Z,1513237690.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:10.055Z,1513237690.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:10.391Z,1513237690.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:10.415Z,1513237690.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:10.791Z,1513237690.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:10.843Z,1513237690.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:11.171Z,1513237691.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:11.197Z,1513237691.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:11.564Z,1513237691.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:11.600Z,1513237691.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:11.973Z,1513237691.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:12.008Z,1513237692.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:12.373Z,1513237692.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:12.402Z,1513237692.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:12.773Z,1513237692.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:12.799Z,1513237692.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:13.200Z,1513237693.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:13.223Z,1513237693.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:13.582Z,1513237693.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:13.605Z,1513237693.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:13.996Z,1513237693.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:14.011Z,1513237694.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:14.399Z,1513237694.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:14.467Z,1513237694.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:14.777Z,1513237694.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:14.832Z,1513237694.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:15.173Z,1513237695.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:15.187Z,1513237695.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:15.576Z,1513237695.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:15.603Z,1513237695.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:15.989Z,1513237695.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:16.047Z,1513237696.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:16.410Z,1513237696.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:16.463Z,1513237696.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:16.780Z,1513237696.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:16.892Z,1513237696.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:17.197Z,1513237697.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:17.227Z,1513237697.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:17.573Z,1513237697.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:17.588Z,1513237697.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:17.972Z,1513237697.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:17.996Z,1513237697.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:18.392Z,1513237698.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:18.415Z,1513237698.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:18.769Z,1513237698.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:18.797Z,1513237698.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:19.185Z,1513237699.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:19.215Z,1513237699.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:19.598Z,1513237699.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:19.633Z,1513237699.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:19.979Z,1513237699.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:20.011Z,1513237700.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:20.374Z,1513237700.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:20.401Z,1513237700.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:20.775Z,1513237700.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:20.795Z,1513237700.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:21.177Z,1513237701.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:21.191Z,1513237701.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:21.575Z,1513237701.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:21.664Z,1513237701.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:21.986Z,1513237701.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:22.013Z,1513237702.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:22.378Z,1513237702.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:22.393Z,1513237702.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:22.786Z,1513237702.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:22.818Z,1513237702.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:23.190Z,1513237703.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:23.205Z,1513237703.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:23.579Z,1513237703.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:23.595Z,1513237703.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:23.975Z,1513237703.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:23.994Z,1513237703.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:24.389Z,1513237704.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:24.425Z,1513237704.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:24.780Z,1513237704.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:24.795Z,1513237704.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:25.190Z,1513237705.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:25.260Z,1513237705.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:25.589Z,1513237705.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:25.611Z,1513237705.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:25.998Z,1513237705.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:26.062Z,1513237706.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:26.372Z,1513237706.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:26.404Z,1513237706.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:26.771Z,1513237706.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:26.807Z,1513237706.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:27.171Z,1513237707.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:27.205Z,1513237707.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:27.568Z,1513237707.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:27.604Z,1513237707.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:27.979Z,1513237707.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:28.012Z,1513237708.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:28.399Z,1513237708.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:28.414Z,1513237708.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:28.778Z,1513237708.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:28.947Z,1513237708.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:29.161Z,1513237709.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:29.247Z,1513237709.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:29.570Z,1513237709.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:29.576Z,1513237709.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x9555 got:0x16897
2017-12-14T07:48:29.611Z,1513237709.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:29.967Z,1513237709.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:30.004Z,1513237710.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:30.368Z,1513237710.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:30.396Z,1513237710.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:30.763Z,1513237710.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:30.810Z,1513237710.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:31.184Z,1513237711.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:31.212Z,1513237711.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:31.586Z,1513237711.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:31.601Z,1513237711.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:31.987Z,1513237711.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:32.003Z,1513237712.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:32.394Z,1513237712.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:32.423Z,1513237712.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:32.772Z,1513237712.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:32.935Z,1513237712.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:33.174Z,1513237713.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:33.219Z,1513237713.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:33.572Z,1513237713.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:33.604Z,1513237713.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:33.995Z,1513237713.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:34.015Z,1513237714.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:34.394Z,1513237714.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:34.410Z,1513237714.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:34.795Z,1513237714.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:34.816Z,1513237714.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:35.170Z,1513237715.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:35.194Z,1513237715.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:35.604Z,1513237715.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:35.698Z,1513237715.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:35.972Z,1513237715.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:35.987Z,1513237715.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:36.380Z,1513237716.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:36.433Z,1513237716.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:36.803Z,1513237716.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:36.818Z,1513237716.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:37.188Z,1513237717.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:37.213Z,1513237717.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:37.602Z,1513237717.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:37.655Z,1513237717.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:37.989Z,1513237717.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:38.019Z,1513237718.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:38.373Z,1513237718.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:38.424Z,1513237718.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:38.790Z,1513237718.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:38.826Z,1513237718.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:39.181Z,1513237719.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:39.214Z,1513237719.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:39.572Z,1513237719.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:39.599Z,1513237719.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:39.986Z,1513237719.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:40.007Z,1513237720.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:40.392Z,1513237720.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:40.407Z,1513237720.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:40.790Z,1513237720.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:40.807Z,1513237720.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:41.181Z,1513237721.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:41.196Z,1513237721.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:41.582Z,1513237721.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:41.596Z,1513237721.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:41.982Z,1513237721.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:42.022Z,1513237722.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:42.389Z,1513237722.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:42.405Z,1513237722.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:42.774Z,1513237722.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:42.781Z,1513237722.781 [PNI_TCM](ERROR): CRC does not match. Expected:0x58170 got:0x42827
2017-12-14T07:48:42.799Z,1513237722.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:43.187Z,1513237723.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:43.207Z,1513237723.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:43.589Z,1513237723.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:43.616Z,1513237723.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:43.989Z,1513237723.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:44.003Z,1513237724.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:44.363Z,1513237724.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:44.391Z,1513237724.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:44.780Z,1513237724.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:44.796Z,1513237724.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:45.183Z,1513237725.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:45.216Z,1513237725.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:45.583Z,1513237725.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:45.612Z,1513237725.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:46.000Z,1513237726.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:46.023Z,1513237726.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:49.498Z,1513237729.498 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T07:48:49.498Z,1513237729.498 [NAL9602] Data Fault, FailCount= 5
2017-12-14T07:48:49.498Z,1513237729.498 [NAL9602](ERROR): Data Fault
2017-12-14T07:48:49.515Z,1513237729.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:49.582Z,1513237729.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:49.620Z,1513237729.620 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T07:48:49.621Z,1513237729.621 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T07:48:49.667Z,1513237729.667 [NAL9602](INFO): Powering down
2017-12-14T07:48:49.684Z,1513237729.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:49.716Z,1513237729.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:49.735Z,1513237729.735 [CBIT](INFO): Critical error at 20171214T074849
2017-12-14T07:48:50.064Z,1513237730.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:50.079Z,1513237730.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:50.469Z,1513237730.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:50.544Z,1513237730.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:50.858Z,1513237730.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:50.887Z,1513237730.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:51.255Z,1513237731.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:51.287Z,1513237731.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:51.657Z,1513237731.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:51.711Z,1513237731.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:52.055Z,1513237732.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:52.087Z,1513237732.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:52.453Z,1513237732.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:52.549Z,1513237732.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:52.855Z,1513237732.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:52.879Z,1513237732.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:53.267Z,1513237733.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:53.294Z,1513237733.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:53.655Z,1513237733.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:53.691Z,1513237733.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:54.058Z,1513237734.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:54.074Z,1513237734.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:54.462Z,1513237734.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:54.556Z,1513237734.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:54.887Z,1513237734.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:54.935Z,1513237734.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:55.254Z,1513237735.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:55.297Z,1513237735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:55.655Z,1513237735.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:55.670Z,1513237735.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:56.059Z,1513237736.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:56.073Z,1513237736.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:56.458Z,1513237736.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:56.474Z,1513237736.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:56.859Z,1513237736.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:56.874Z,1513237736.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:57.264Z,1513237737.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:57.279Z,1513237737.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:57.662Z,1513237737.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:57.676Z,1513237737.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:58.099Z,1513237738.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:58.149Z,1513237738.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:58.465Z,1513237738.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:58.480Z,1513237738.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:58.926Z,1513237738.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:58.962Z,1513237738.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:59.256Z,1513237739.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:59.289Z,1513237739.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:48:59.663Z,1513237739.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:48:59.677Z,1513237739.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:00.065Z,1513237740.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:00.079Z,1513237740.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:00.464Z,1513237740.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:00.535Z,1513237740.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:00.912Z,1513237740.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:00.936Z,1513237740.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:01.306Z,1513237741.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:01.336Z,1513237741.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:01.661Z,1513237741.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:01.718Z,1513237741.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:02.063Z,1513237742.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:02.077Z,1513237742.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:02.463Z,1513237742.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:02.552Z,1513237742.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:02.856Z,1513237742.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:02.887Z,1513237742.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:03.270Z,1513237743.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:03.290Z,1513237743.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:03.666Z,1513237743.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:03.681Z,1513237743.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:04.066Z,1513237744.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:04.081Z,1513237744.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:04.580Z,1513237744.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:04.623Z,1513237744.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:04.860Z,1513237744.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:04.875Z,1513237744.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:05.260Z,1513237745.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:05.287Z,1513237745.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:05.666Z,1513237745.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:05.680Z,1513237745.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:06.059Z,1513237746.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:06.075Z,1513237746.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:06.466Z,1513237746.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:06.481Z,1513237746.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:06.851Z,1513237746.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:06.878Z,1513237746.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:07.254Z,1513237747.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:07.285Z,1513237747.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:07.655Z,1513237747.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:07.686Z,1513237747.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:08.064Z,1513237748.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:08.078Z,1513237748.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:08.460Z,1513237748.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:08.475Z,1513237748.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:08.865Z,1513237748.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:08.891Z,1513237748.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:09.261Z,1513237749.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:09.292Z,1513237749.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:09.662Z,1513237749.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:09.693Z,1513237749.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:10.066Z,1513237750.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:10.087Z,1513237750.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:10.102Z,1513237750.102 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:49:10.461Z,1513237750.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:10.491Z,1513237750.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:10.904Z,1513237750.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:10.962Z,1513237750.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:11.267Z,1513237751.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:11.282Z,1513237751.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:11.665Z,1513237751.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:11.687Z,1513237751.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:12.060Z,1513237752.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:12.076Z,1513237752.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:12.460Z,1513237752.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:12.483Z,1513237752.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:12.924Z,1513237752.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:12.959Z,1513237752.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:13.258Z,1513237753.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:13.287Z,1513237753.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:13.653Z,1513237753.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:13.685Z,1513237753.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:14.088Z,1513237754.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:14.135Z,1513237754.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:14.455Z,1513237754.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:14.487Z,1513237754.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:14.906Z,1513237754.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:14.942Z,1513237754.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:15.261Z,1513237755.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:15.275Z,1513237755.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:15.663Z,1513237755.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:15.679Z,1513237755.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:16.063Z,1513237756.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:16.078Z,1513237756.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:16.460Z,1513237756.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:16.475Z,1513237756.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:16.854Z,1513237756.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:16.885Z,1513237756.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:17.304Z,1513237757.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:17.336Z,1513237757.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:17.654Z,1513237757.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:17.693Z,1513237757.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:18.058Z,1513237758.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:18.093Z,1513237758.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:18.462Z,1513237758.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:18.558Z,1513237758.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:18.866Z,1513237758.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:18.887Z,1513237758.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:19.262Z,1513237759.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:19.277Z,1513237759.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:19.663Z,1513237759.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:19.678Z,1513237759.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:20.063Z,1513237760.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:20.078Z,1513237760.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:20.547Z,1513237760.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:20.600Z,1513237760.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:20.874Z,1513237760.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:20.888Z,1513237760.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:21.262Z,1513237761.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:21.288Z,1513237761.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:21.655Z,1513237761.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:21.686Z,1513237761.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:22.058Z,1513237762.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:22.089Z,1513237762.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:22.458Z,1513237762.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:22.505Z,1513237762.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:22.859Z,1513237762.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:22.918Z,1513237762.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:23.266Z,1513237763.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:23.281Z,1513237763.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:23.666Z,1513237763.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:23.680Z,1513237763.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:24.062Z,1513237764.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:24.077Z,1513237764.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:24.462Z,1513237764.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:24.478Z,1513237764.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:24.861Z,1513237764.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:24.883Z,1513237764.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:25.263Z,1513237765.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:25.278Z,1513237765.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:25.667Z,1513237765.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:25.681Z,1513237765.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:26.062Z,1513237766.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:26.070Z,1513237766.070 [BPC1](ERROR): Failed to receive battery data
2017-12-14T07:49:26.070Z,1513237766.070 [BPC1] Communications Fault, FailCount= 1
2017-12-14T07:49:26.070Z,1513237766.070 [BPC1](ERROR): Communications Fault
2017-12-14T07:49:26.078Z,1513237766.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:26.091Z,1513237766.091 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T07:49:26.459Z,1513237766.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:26.475Z,1513237766.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:26.943Z,1513237766.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:26.989Z,1513237766.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:27.253Z,1513237767.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:27.281Z,1513237767.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:27.294Z,1513237767.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:49:27.295Z,1513237767.295 [BPC1] No Fault, FailCount= 1
2017-12-14T07:49:27.658Z,1513237767.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:27.735Z,1513237767.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:28.058Z,1513237768.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:28.083Z,1513237768.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:28.459Z,1513237768.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:28.484Z,1513237768.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:28.970Z,1513237768.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:29.015Z,1513237769.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:29.269Z,1513237769.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:29.290Z,1513237769.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:29.662Z,1513237769.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:29.692Z,1513237769.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:30.052Z,1513237770.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:30.068Z,1513237770.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:30.470Z,1513237770.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:30.538Z,1513237770.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:30.855Z,1513237770.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:30.887Z,1513237770.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:31.267Z,1513237771.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:31.282Z,1513237771.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:31.654Z,1513237771.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:31.679Z,1513237771.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:32.050Z,1513237772.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:32.076Z,1513237772.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:32.076Z,1513237772.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146
2017-12-14T07:49:32.076Z,1513237772.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:49:32.078Z,1513237772.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:32.078Z,1513237772.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 146
2017-12-14T07:49:32.078Z,1513237772.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:49:32.080Z,1513237772.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:32.080Z,1513237772.080 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2017-12-14T07:49:32.080Z,1513237772.080 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:49:32.092Z,1513237772.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:49:32.092Z,1513237772.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:49:32.092Z,1513237772.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:49:32.447Z,1513237772.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:32.532Z,1513237772.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:49:32.532Z,1513237772.532 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146
2017-12-14T07:49:32.542Z,1513237772.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:49:32.543Z,1513237772.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 146
2017-12-14T07:49:32.544Z,1513237772.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:49:32.553Z,1513237772.553 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2017-12-14T07:49:32.861Z,1513237772.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:32.883Z,1513237772.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:49:32.883Z,1513237772.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:49:32.884Z,1513237772.884 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:49:32.884Z,1513237772.884 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:49:32.884Z,1513237772.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:49:32.885Z,1513237772.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:49:32.885Z,1513237772.885 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:49:32.886Z,1513237772.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:49:32.886Z,1513237772.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:49:33.293Z,1513237773.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:33.324Z,1513237773.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:33.661Z,1513237773.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:33.675Z,1513237773.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:34.064Z,1513237774.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:34.078Z,1513237774.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:34.462Z,1513237774.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:34.476Z,1513237774.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:34.863Z,1513237774.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:34.877Z,1513237774.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:35.259Z,1513237775.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:35.286Z,1513237775.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:35.661Z,1513237775.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:35.676Z,1513237775.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:36.059Z,1513237776.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:36.112Z,1513237776.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:36.545Z,1513237776.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:36.575Z,1513237776.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:36.864Z,1513237776.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:36.879Z,1513237776.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:37.264Z,1513237777.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:37.279Z,1513237777.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:37.663Z,1513237777.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:37.678Z,1513237777.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:38.059Z,1513237778.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:38.075Z,1513237778.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:38.458Z,1513237778.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:38.473Z,1513237778.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:38.864Z,1513237778.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:38.878Z,1513237778.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:39.260Z,1513237779.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:39.279Z,1513237779.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:39.664Z,1513237779.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:39.679Z,1513237779.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:40.062Z,1513237780.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:40.077Z,1513237780.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:40.462Z,1513237780.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:40.478Z,1513237780.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:40.915Z,1513237780.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:40.935Z,1513237780.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:41.260Z,1513237781.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:41.287Z,1513237781.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:41.714Z,1513237781.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:41.735Z,1513237781.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:42.061Z,1513237782.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:42.076Z,1513237782.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:42.461Z,1513237782.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:42.488Z,1513237782.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:42.941Z,1513237782.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:42.996Z,1513237782.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:43.254Z,1513237783.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:43.292Z,1513237783.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:43.658Z,1513237783.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:43.672Z,1513237783.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:44.061Z,1513237784.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:44.076Z,1513237784.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:44.462Z,1513237784.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:44.477Z,1513237784.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:44.855Z,1513237784.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:44.880Z,1513237784.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:45.254Z,1513237785.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:45.287Z,1513237785.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:45.654Z,1513237785.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:45.679Z,1513237785.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:46.055Z,1513237786.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:46.091Z,1513237786.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:49.658Z,1513237789.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:49.761Z,1513237789.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:49.848Z,1513237789.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:49.894Z,1513237789.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:50.219Z,1513237790.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:50.249Z,1513237790.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:50.631Z,1513237790.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:50.671Z,1513237790.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:51.020Z,1513237791.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:51.046Z,1513237791.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:51.420Z,1513237791.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:51.483Z,1513237791.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:51.830Z,1513237791.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:51.844Z,1513237791.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:52.212Z,1513237792.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:52.246Z,1513237792.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:52.630Z,1513237792.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:52.651Z,1513237792.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:53.046Z,1513237793.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:53.061Z,1513237793.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:53.419Z,1513237793.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:53.446Z,1513237793.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:53.818Z,1513237793.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:53.851Z,1513237793.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:54.216Z,1513237794.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:54.240Z,1513237794.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:54.616Z,1513237794.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:54.646Z,1513237794.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:55.017Z,1513237795.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:55.046Z,1513237795.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:55.419Z,1513237795.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:55.453Z,1513237795.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:55.818Z,1513237795.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:55.845Z,1513237795.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:56.218Z,1513237796.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:56.245Z,1513237796.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:56.616Z,1513237796.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:56.645Z,1513237796.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:57.034Z,1513237797.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:57.055Z,1513237797.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:57.417Z,1513237797.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:57.451Z,1513237797.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:57.835Z,1513237797.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:57.849Z,1513237797.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:58.216Z,1513237798.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:58.244Z,1513237798.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:58.622Z,1513237798.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:58.658Z,1513237798.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:59.018Z,1513237799.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:59.054Z,1513237799.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:59.416Z,1513237799.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:59.431Z,1513237799.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:49:59.822Z,1513237799.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:49:59.875Z,1513237799.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:00.217Z,1513237800.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:00.234Z,1513237800.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:00.624Z,1513237800.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:00.648Z,1513237800.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:01.020Z,1513237801.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:01.048Z,1513237801.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:01.430Z,1513237801.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:01.444Z,1513237801.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:01.855Z,1513237801.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:01.886Z,1513237801.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:02.239Z,1513237802.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:02.254Z,1513237802.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:02.629Z,1513237802.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:02.644Z,1513237802.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:03.028Z,1513237803.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:03.049Z,1513237803.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:03.421Z,1513237803.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:03.448Z,1513237803.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:03.831Z,1513237803.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:03.845Z,1513237803.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:04.215Z,1513237804.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:04.251Z,1513237804.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:04.623Z,1513237804.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:04.649Z,1513237804.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:05.051Z,1513237805.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:05.075Z,1513237805.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:05.418Z,1513237805.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:05.443Z,1513237805.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:05.822Z,1513237805.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:05.854Z,1513237805.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:06.224Z,1513237806.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:06.240Z,1513237806.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:06.638Z,1513237806.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:06.671Z,1513237806.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:07.031Z,1513237807.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:07.061Z,1513237807.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:07.419Z,1513237807.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:07.435Z,1513237807.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:07.822Z,1513237807.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:07.838Z,1513237807.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:08.263Z,1513237808.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:08.283Z,1513237808.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:08.634Z,1513237808.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:08.670Z,1513237808.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:09.029Z,1513237809.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:09.044Z,1513237809.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:09.429Z,1513237809.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:09.451Z,1513237809.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:09.827Z,1513237809.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:09.847Z,1513237809.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:10.227Z,1513237810.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:10.243Z,1513237810.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:10.622Z,1513237810.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:10.651Z,1513237810.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:11.026Z,1513237811.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:11.047Z,1513237811.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:11.460Z,1513237811.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:11.563Z,1513237811.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:11.818Z,1513237811.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:11.855Z,1513237811.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:12.223Z,1513237812.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:12.249Z,1513237812.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:12.618Z,1513237812.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:12.659Z,1513237812.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:13.018Z,1513237813.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:13.051Z,1513237813.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:13.422Z,1513237813.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:13.467Z,1513237813.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:13.818Z,1513237813.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:13.844Z,1513237813.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:14.219Z,1513237814.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:14.233Z,1513237814.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:14.619Z,1513237814.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:14.633Z,1513237814.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:15.035Z,1513237815.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:15.072Z,1513237815.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:15.424Z,1513237815.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:15.439Z,1513237815.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:15.824Z,1513237815.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:15.838Z,1513237815.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:16.226Z,1513237816.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:16.240Z,1513237816.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:16.626Z,1513237816.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:16.640Z,1513237816.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:17.026Z,1513237817.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:17.078Z,1513237817.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:17.419Z,1513237817.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:17.435Z,1513237817.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:17.881Z,1513237817.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:17.923Z,1513237817.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:18.226Z,1513237818.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:18.247Z,1513237818.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:18.627Z,1513237818.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:18.641Z,1513237818.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:19.030Z,1513237819.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:19.045Z,1513237819.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:19.426Z,1513237819.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:19.441Z,1513237819.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:19.819Z,1513237819.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:19.834Z,1513237819.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:20.226Z,1513237820.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:20.240Z,1513237820.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:20.632Z,1513237820.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:20.674Z,1513237820.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:21.046Z,1513237821.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:21.095Z,1513237821.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:21.427Z,1513237821.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:21.447Z,1513237821.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:21.823Z,1513237821.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:21.869Z,1513237821.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:22.226Z,1513237822.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:22.241Z,1513237822.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:22.626Z,1513237822.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:22.651Z,1513237822.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:23.032Z,1513237823.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:23.079Z,1513237823.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:23.431Z,1513237823.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:23.447Z,1513237823.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:23.828Z,1513237823.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:23.842Z,1513237823.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:24.268Z,1513237824.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:24.329Z,1513237824.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:24.630Z,1513237824.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:24.644Z,1513237824.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:25.026Z,1513237825.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:25.040Z,1513237825.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:25.429Z,1513237825.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:25.444Z,1513237825.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:25.824Z,1513237825.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:25.839Z,1513237825.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:26.224Z,1513237826.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:26.249Z,1513237826.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:26.625Z,1513237826.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:26.647Z,1513237826.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:27.029Z,1513237827.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:27.044Z,1513237827.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:27.450Z,1513237827.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:27.488Z,1513237827.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:27.833Z,1513237827.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:27.848Z,1513237827.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:28.228Z,1513237828.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:28.243Z,1513237828.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:28.625Z,1513237828.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:28.641Z,1513237828.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:29.020Z,1513237829.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:29.051Z,1513237829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:29.427Z,1513237829.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:29.447Z,1513237829.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:29.831Z,1513237829.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:29.846Z,1513237829.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:30.234Z,1513237830.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:30.251Z,1513237830.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:30.660Z,1513237830.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:30.690Z,1513237830.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:31.037Z,1513237831.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:31.059Z,1513237831.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:31.430Z,1513237831.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:31.451Z,1513237831.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:31.831Z,1513237831.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:31.846Z,1513237831.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:32.227Z,1513237832.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:32.241Z,1513237832.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:32.631Z,1513237832.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:32.651Z,1513237832.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:33.031Z,1513237833.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:33.048Z,1513237833.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:33.425Z,1513237833.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:33.447Z,1513237833.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:33.846Z,1513237833.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:33.947Z,1513237833.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:34.228Z,1513237834.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:34.287Z,1513237834.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:34.646Z,1513237834.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:34.662Z,1513237834.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:35.030Z,1513237835.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:35.045Z,1513237835.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:35.418Z,1513237835.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:35.484Z,1513237835.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:35.818Z,1513237835.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:35.852Z,1513237835.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:36.230Z,1513237836.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:36.290Z,1513237836.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:36.632Z,1513237836.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:36.647Z,1513237836.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:37.018Z,1513237837.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:37.093Z,1513237837.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:37.417Z,1513237837.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:37.445Z,1513237837.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:37.816Z,1513237837.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:37.846Z,1513237837.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:38.218Z,1513237838.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:38.243Z,1513237838.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:38.622Z,1513237838.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:38.648Z,1513237838.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:39.022Z,1513237839.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:39.092Z,1513237839.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:39.422Z,1513237839.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:39.448Z,1513237839.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:39.822Z,1513237839.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:39.852Z,1513237839.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:40.261Z,1513237840.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:40.300Z,1513237840.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:40.618Z,1513237840.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:40.652Z,1513237840.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:41.025Z,1513237841.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:41.052Z,1513237841.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:41.420Z,1513237841.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:41.447Z,1513237841.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:41.819Z,1513237841.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:41.850Z,1513237841.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:42.223Z,1513237842.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:42.254Z,1513237842.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:42.619Z,1513237842.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:42.634Z,1513237842.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:43.026Z,1513237843.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:43.040Z,1513237843.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:43.438Z,1513237843.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:43.475Z,1513237843.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:43.826Z,1513237843.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:43.841Z,1513237843.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:44.225Z,1513237844.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:44.241Z,1513237844.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:44.627Z,1513237844.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:44.687Z,1513237844.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:45.029Z,1513237845.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:45.045Z,1513237845.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:45.426Z,1513237845.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:45.440Z,1513237845.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:45.829Z,1513237845.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:45.844Z,1513237845.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:46.226Z,1513237846.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:46.247Z,1513237846.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:49.635Z,1513237849.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:49.651Z,1513237849.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:49.687Z,1513237849.687 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T07:50:49.687Z,1513237849.687 [NAL9602] No Fault, FailCount= 5
2017-12-14T07:50:49.735Z,1513237849.735 [NAL9602](INFO): Powering up NAL9602
2017-12-14T07:50:49.766Z,1513237849.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:49.799Z,1513237849.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:50.122Z,1513237850.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:50.149Z,1513237850.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:50.523Z,1513237850.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:50.551Z,1513237850.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:50.933Z,1513237850.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:50.969Z,1513237850.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:51.327Z,1513237851.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:51.354Z,1513237851.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:51.727Z,1513237851.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:51.754Z,1513237851.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:52.126Z,1513237852.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:52.154Z,1513237852.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:52.522Z,1513237852.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:52.562Z,1513237852.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:52.928Z,1513237852.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:52.968Z,1513237852.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:53.323Z,1513237853.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:53.359Z,1513237853.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:53.723Z,1513237853.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:53.759Z,1513237853.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:54.122Z,1513237854.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:54.150Z,1513237854.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:54.577Z,1513237854.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:54.604Z,1513237854.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:54.932Z,1513237854.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:54.959Z,1513237854.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:55.331Z,1513237855.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:55.345Z,1513237855.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:55.728Z,1513237855.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:55.743Z,1513237855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:56.146Z,1513237856.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:56.190Z,1513237856.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:56.572Z,1513237856.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:56.615Z,1513237856.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:56.923Z,1513237856.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:57.011Z,1513237857.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:57.334Z,1513237857.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:57.349Z,1513237857.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:57.727Z,1513237857.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:57.741Z,1513237857.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:58.127Z,1513237858.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:58.182Z,1513237858.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:58.583Z,1513237858.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:58.626Z,1513237858.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:58.929Z,1513237858.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:58.981Z,1513237858.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:59.330Z,1513237859.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:59.346Z,1513237859.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:50:59.729Z,1513237859.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:50:59.744Z,1513237859.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:00.131Z,1513237860.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:00.146Z,1513237860.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:00.593Z,1513237860.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:00.620Z,1513237860.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:00.911Z,1513237860.911 [NAL9602](INFO): NAL9602 initialized
2017-12-14T07:51:00.940Z,1513237860.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:00.955Z,1513237860.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:01.334Z,1513237861.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:01.349Z,1513237861.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:01.750Z,1513237861.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:01.765Z,1513237861.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:02.146Z,1513237862.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:02.167Z,1513237862.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:02.524Z,1513237862.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:02.576Z,1513237862.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:02.941Z,1513237862.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:02.956Z,1513237862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:03.341Z,1513237863.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:03.356Z,1513237863.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:03.735Z,1513237863.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:03.750Z,1513237863.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:04.141Z,1513237864.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:04.156Z,1513237864.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:04.541Z,1513237864.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:04.556Z,1513237864.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:04.953Z,1513237864.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:04.968Z,1513237864.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:05.338Z,1513237865.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:05.359Z,1513237865.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:05.735Z,1513237865.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:05.750Z,1513237865.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:06.137Z,1513237866.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:06.152Z,1513237866.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:06.532Z,1513237866.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:06.547Z,1513237866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:06.955Z,1513237866.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:07.008Z,1513237867.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:07.351Z,1513237867.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:07.371Z,1513237867.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:07.746Z,1513237867.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:07.761Z,1513237867.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:08.148Z,1513237868.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:08.163Z,1513237868.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:08.589Z,1513237868.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:08.613Z,1513237868.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:08.944Z,1513237868.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:08.959Z,1513237868.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:09.358Z,1513237869.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:09.397Z,1513237869.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:09.733Z,1513237869.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:09.766Z,1513237869.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:10.139Z,1513237870.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:10.167Z,1513237870.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:10.596Z,1513237870.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:10.622Z,1513237870.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:10.932Z,1513237870.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:10.955Z,1513237870.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:11.333Z,1513237871.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:11.348Z,1513237871.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:11.730Z,1513237871.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:11.753Z,1513237871.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:12.136Z,1513237872.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:12.151Z,1513237872.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:12.626Z,1513237872.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:12.658Z,1513237872.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:12.943Z,1513237872.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:12.963Z,1513237872.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:13.348Z,1513237873.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:13.362Z,1513237873.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:13.744Z,1513237873.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:13.759Z,1513237873.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:14.149Z,1513237874.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:14.164Z,1513237874.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:14.586Z,1513237874.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:14.609Z,1513237874.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:14.942Z,1513237874.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:14.959Z,1513237874.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:15.331Z,1513237875.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:15.352Z,1513237875.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:15.734Z,1513237875.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:15.755Z,1513237875.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:16.161Z,1513237876.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:16.177Z,1513237876.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:16.572Z,1513237876.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:16.645Z,1513237876.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:16.943Z,1513237876.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:16.967Z,1513237876.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:17.331Z,1513237877.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:17.351Z,1513237877.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:17.734Z,1513237877.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:17.750Z,1513237877.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:18.134Z,1513237878.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:18.149Z,1513237878.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:18.534Z,1513237878.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:18.615Z,1513237878.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:18.995Z,1513237878.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:19.115Z,1513237879.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:19.348Z,1513237879.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:19.373Z,1513237879.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:19.748Z,1513237879.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:19.811Z,1513237879.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:20.157Z,1513237880.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:20.180Z,1513237880.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:20.531Z,1513237880.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:20.580Z,1513237880.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:20.969Z,1513237880.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:21.008Z,1513237881.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:21.333Z,1513237881.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:21.356Z,1513237881.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:21.741Z,1513237881.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:21.802Z,1513237881.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:22.140Z,1513237882.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:22.160Z,1513237882.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:22.606Z,1513237882.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:22.649Z,1513237882.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:22.946Z,1513237882.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:22.983Z,1513237882.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:23.334Z,1513237883.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:23.377Z,1513237883.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:23.731Z,1513237883.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:23.775Z,1513237883.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:24.122Z,1513237884.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:24.174Z,1513237884.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:24.568Z,1513237884.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:24.612Z,1513237884.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:24.932Z,1513237884.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:24.974Z,1513237884.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:25.340Z,1513237885.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:25.356Z,1513237885.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:25.741Z,1513237885.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:25.788Z,1513237885.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:26.135Z,1513237886.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:26.183Z,1513237886.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:26.558Z,1513237886.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:26.615Z,1513237886.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:26.931Z,1513237886.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:26.981Z,1513237886.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:27.325Z,1513237887.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:27.364Z,1513237887.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:27.764Z,1513237887.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:27.793Z,1513237887.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:28.141Z,1513237888.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:28.165Z,1513237888.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:28.630Z,1513237888.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:28.719Z,1513237888.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:28.960Z,1513237888.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:29.027Z,1513237889.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:29.332Z,1513237889.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:29.355Z,1513237889.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:29.723Z,1513237889.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:29.755Z,1513237889.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:30.167Z,1513237890.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:30.182Z,1513237890.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:30.528Z,1513237890.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:30.634Z,1513237890.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:30.931Z,1513237890.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:30.973Z,1513237890.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:31.367Z,1513237891.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:31.400Z,1513237891.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:31.740Z,1513237891.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:31.779Z,1513237891.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:32.160Z,1513237892.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:32.227Z,1513237892.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:32.543Z,1513237892.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:32.580Z,1513237892.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:32.927Z,1513237892.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:32.968Z,1513237892.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:33.351Z,1513237893.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:33.397Z,1513237893.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:33.724Z,1513237893.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:33.764Z,1513237893.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:34.145Z,1513237894.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:34.171Z,1513237894.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:34.549Z,1513237894.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:34.582Z,1513237894.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:34.958Z,1513237894.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:34.999Z,1513237894.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:35.326Z,1513237895.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:35.366Z,1513237895.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:35.725Z,1513237895.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:35.782Z,1513237895.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:36.127Z,1513237896.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:36.155Z,1513237896.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:36.582Z,1513237896.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:36.634Z,1513237896.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:36.937Z,1513237896.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:36.979Z,1513237896.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:37.340Z,1513237897.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:37.383Z,1513237897.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:37.740Z,1513237897.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:37.760Z,1513237897.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:38.144Z,1513237898.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:38.164Z,1513237898.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:38.600Z,1513237898.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:38.639Z,1513237898.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:38.934Z,1513237898.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:38.960Z,1513237898.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:39.335Z,1513237899.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:39.363Z,1513237899.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:39.725Z,1513237899.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:39.767Z,1513237899.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:40.138Z,1513237900.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:40.175Z,1513237900.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:40.600Z,1513237900.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:40.722Z,1513237900.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:40.951Z,1513237900.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:41.050Z,1513237901.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:41.336Z,1513237901.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:41.356Z,1513237901.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:41.734Z,1513237901.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:41.758Z,1513237901.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:42.157Z,1513237902.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:42.246Z,1513237902.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:42.568Z,1513237902.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:42.612Z,1513237902.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:42.927Z,1513237902.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:42.987Z,1513237902.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:43.351Z,1513237903.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:43.431Z,1513237903.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:43.746Z,1513237903.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:43.791Z,1513237903.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:44.146Z,1513237904.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:44.185Z,1513237904.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:44.534Z,1513237904.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:44.638Z,1513237904.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:44.930Z,1513237904.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:44.961Z,1513237904.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:45.324Z,1513237905.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:45.351Z,1513237905.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:45.723Z,1513237905.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:45.757Z,1513237905.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:46.144Z,1513237906.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:46.159Z,1513237906.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:46.547Z,1513237906.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:46.567Z,1513237906.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:50.052Z,1513237910.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:50.068Z,1513237910.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:50.164Z,1513237910.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:50.206Z,1513237910.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:50.583Z,1513237910.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:50.615Z,1513237910.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:50.950Z,1513237910.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:50.970Z,1513237910.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:51.368Z,1513237911.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:51.419Z,1513237911.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:51.754Z,1513237911.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:51.773Z,1513237911.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:52.161Z,1513237912.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:52.183Z,1513237912.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:52.590Z,1513237912.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:52.621Z,1513237912.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:52.950Z,1513237912.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:52.987Z,1513237912.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:53.343Z,1513237913.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:53.357Z,1513237913.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:53.742Z,1513237913.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:53.757Z,1513237913.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:54.144Z,1513237914.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:54.171Z,1513237914.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:54.577Z,1513237914.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:54.592Z,1513237914.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:54.968Z,1513237914.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:55.003Z,1513237915.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:55.354Z,1513237915.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:55.370Z,1513237915.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:55.758Z,1513237915.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:55.810Z,1513237915.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:56.152Z,1513237916.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:56.172Z,1513237916.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:56.576Z,1513237916.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:56.601Z,1513237916.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:56.956Z,1513237916.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:56.971Z,1513237916.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:57.350Z,1513237917.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:57.366Z,1513237917.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:57.743Z,1513237917.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:57.759Z,1513237917.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:58.184Z,1513237918.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:58.215Z,1513237918.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:58.571Z,1513237918.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:58.627Z,1513237918.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:58.958Z,1513237918.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:58.975Z,1513237918.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:59.335Z,1513237919.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:59.409Z,1513237919.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:51:59.736Z,1513237919.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:51:59.767Z,1513237919.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:00.135Z,1513237920.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:00.166Z,1513237920.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:00.538Z,1513237920.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:00.573Z,1513237920.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:00.937Z,1513237920.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:00.964Z,1513237920.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:01.361Z,1513237921.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:01.394Z,1513237921.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:01.754Z,1513237921.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:01.787Z,1513237921.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:02.156Z,1513237922.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:02.182Z,1513237922.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:02.544Z,1513237922.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:02.567Z,1513237922.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:02.945Z,1513237922.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:02.977Z,1513237922.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:03.345Z,1513237923.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:03.402Z,1513237923.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:03.750Z,1513237923.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:03.799Z,1513237923.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:04.149Z,1513237924.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:04.164Z,1513237924.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:04.604Z,1513237924.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:04.663Z,1513237924.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:04.953Z,1513237924.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:04.967Z,1513237924.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:05.350Z,1513237925.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:05.391Z,1513237925.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:05.766Z,1513237925.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:05.797Z,1513237925.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:06.135Z,1513237926.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:06.174Z,1513237926.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:06.599Z,1513237926.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:06.621Z,1513237926.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:06.942Z,1513237926.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:06.956Z,1513237926.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:07.354Z,1513237927.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:07.380Z,1513237927.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:07.753Z,1513237927.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:07.767Z,1513237927.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:08.148Z,1513237928.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:08.183Z,1513237928.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:08.591Z,1513237928.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:08.633Z,1513237928.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:08.941Z,1513237928.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:08.974Z,1513237928.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:09.346Z,1513237929.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:09.379Z,1513237929.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:09.741Z,1513237929.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:09.756Z,1513237929.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:10.158Z,1513237930.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:10.183Z,1513237930.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:10.589Z,1513237930.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:10.610Z,1513237930.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:10.959Z,1513237930.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:10.997Z,1513237930.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:11.342Z,1513237931.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:11.358Z,1513237931.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:11.742Z,1513237931.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:11.760Z,1513237931.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:12.143Z,1513237932.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:12.162Z,1513237932.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:12.593Z,1513237932.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:12.653Z,1513237932.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:12.934Z,1513237932.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:12.967Z,1513237932.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:13.350Z,1513237933.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:13.365Z,1513237933.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:13.749Z,1513237933.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:13.790Z,1513237933.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:14.189Z,1513237934.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:14.216Z,1513237934.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:14.543Z,1513237934.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:14.561Z,1513237934.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:14.948Z,1513237934.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:14.963Z,1513237934.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:15.343Z,1513237935.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:15.370Z,1513237935.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:15.747Z,1513237935.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:15.763Z,1513237935.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:16.158Z,1513237936.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:16.172Z,1513237936.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:16.555Z,1513237936.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:16.570Z,1513237936.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:16.959Z,1513237936.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:16.979Z,1513237936.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:17.383Z,1513237937.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:17.415Z,1513237937.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:17.735Z,1513237937.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:17.771Z,1513237937.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:18.135Z,1513237938.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:18.168Z,1513237938.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:18.580Z,1513237938.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:18.619Z,1513237938.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:18.936Z,1513237938.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:18.969Z,1513237938.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:19.358Z,1513237939.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:19.387Z,1513237939.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:19.749Z,1513237939.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:19.763Z,1513237939.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:20.147Z,1513237940.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:20.162Z,1513237940.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:20.581Z,1513237940.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:20.620Z,1513237940.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:20.952Z,1513237940.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:20.967Z,1513237940.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:21.350Z,1513237941.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:21.365Z,1513237941.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:21.748Z,1513237941.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:21.763Z,1513237941.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:22.157Z,1513237942.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:22.172Z,1513237942.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:22.592Z,1513237942.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:22.620Z,1513237942.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:22.948Z,1513237942.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:22.983Z,1513237942.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:23.340Z,1513237943.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:23.363Z,1513237943.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:23.735Z,1513237943.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:23.755Z,1513237943.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:24.147Z,1513237944.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:24.167Z,1513237944.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:24.567Z,1513237944.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:24.609Z,1513237944.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:24.953Z,1513237944.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:24.968Z,1513237944.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:25.350Z,1513237945.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:25.366Z,1513237945.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:25.750Z,1513237945.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:25.835Z,1513237945.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:26.147Z,1513237946.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:26.170Z,1513237946.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:26.572Z,1513237946.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:26.651Z,1513237946.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:26.973Z,1513237946.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:27.012Z,1513237947.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:27.336Z,1513237947.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:27.387Z,1513237947.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:27.739Z,1513237947.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:27.764Z,1513237947.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:28.156Z,1513237948.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:28.176Z,1513237948.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:28.555Z,1513237948.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:28.577Z,1513237948.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:28.966Z,1513237948.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:28.980Z,1513237948.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:29.336Z,1513237949.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:29.369Z,1513237949.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:29.736Z,1513237949.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:29.763Z,1513237949.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:30.169Z,1513237950.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:30.196Z,1513237950.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:30.546Z,1513237950.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:30.560Z,1513237950.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:30.944Z,1513237950.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:30.963Z,1513237950.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:31.355Z,1513237951.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:31.386Z,1513237951.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:31.755Z,1513237951.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:31.792Z,1513237951.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.142Z,1513237952.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:32.160Z,1513237952.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.564Z,1513237952.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:32.595Z,1513237952.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.946Z,1513237952.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:32.977Z,1513237952.977 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.978Z,1513237952.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147
2017-12-14T07:52:32.978Z,1513237952.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:52:32.979Z,1513237952.979 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.980Z,1513237952.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 147
2017-12-14T07:52:32.980Z,1513237952.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:52:32.986Z,1513237952.986 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:32.986Z,1513237952.986 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2017-12-14T07:52:32.986Z,1513237952.986 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:52:33.002Z,1513237953.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:52:33.002Z,1513237953.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:52:33.002Z,1513237953.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:52:33.381Z,1513237953.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:33.439Z,1513237953.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:52:33.439Z,1513237953.439 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147
2017-12-14T07:52:33.439Z,1513237953.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:52:33.439Z,1513237953.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 147
2017-12-14T07:52:33.440Z,1513237953.440 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:52:33.440Z,1513237953.440 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2017-12-14T07:52:33.741Z,1513237953.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:33.756Z,1513237953.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:52:33.756Z,1513237953.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:52:33.756Z,1513237953.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:52:33.757Z,1513237953.757 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:52:33.757Z,1513237953.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:52:33.758Z,1513237953.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:52:33.758Z,1513237953.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:52:33.758Z,1513237953.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:52:33.759Z,1513237953.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:52:34.154Z,1513237954.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:34.178Z,1513237954.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:34.587Z,1513237954.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:34.609Z,1513237954.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:34.961Z,1513237954.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:34.980Z,1513237954.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:35.335Z,1513237955.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:35.363Z,1513237955.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:35.739Z,1513237955.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:35.810Z,1513237955.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:36.140Z,1513237956.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:36.172Z,1513237956.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:36.607Z,1513237956.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:36.638Z,1513237956.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:36.950Z,1513237956.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:36.980Z,1513237956.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:37.362Z,1513237957.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:37.382Z,1513237957.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:37.760Z,1513237957.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:37.779Z,1513237957.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:38.143Z,1513237958.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:38.165Z,1513237958.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:38.588Z,1513237958.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:38.605Z,1513237958.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:38.972Z,1513237958.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:38.000Z,1513237959.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:39.350Z,1513237959.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:39.366Z,1513237959.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:39.742Z,1513237959.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:39.762Z,1513237959.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:40.161Z,1513237960.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:40.175Z,1513237960.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:40.572Z,1513237960.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:40.630Z,1513237960.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:40.953Z,1513237960.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:40.998Z,1513237960.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:41.339Z,1513237961.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:41.354Z,1513237961.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:41.731Z,1513237961.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:41.751Z,1513237961.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:42.139Z,1513237962.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:42.154Z,1513237962.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:42.541Z,1513237962.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:42.556Z,1513237962.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:43.010Z,1513237963.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:43.048Z,1513237963.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:43.346Z,1513237963.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:43.361Z,1513237963.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:43.749Z,1513237963.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:43.764Z,1513237963.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:44.158Z,1513237964.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:44.188Z,1513237964.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:44.543Z,1513237964.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:44.557Z,1513237964.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:44.946Z,1513237964.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:44.973Z,1513237964.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:45.344Z,1513237965.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:45.359Z,1513237965.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:45.743Z,1513237965.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:45.763Z,1513237965.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:45.766Z,1513237965.766 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T07:52:45.766Z,1513237965.766 [Default:CheckIn:C.Wait] Stopped
2017-12-14T07:52:45.766Z,1513237965.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T07:52:45.766Z,1513237965.766 [Default:CheckIn:D] Running Loop=1
2017-12-14T07:52:46.176Z,1513237966.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:46.213Z,1513237966.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:46.217Z,1513237966.217 [Default:CheckIn:D] Stopped
2017-12-14T07:52:46.217Z,1513237966.217 [Default:CheckIn:E] Running Loop=1
2017-12-14T07:52:46.590Z,1513237966.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:46.614Z,1513237966.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 439.513770 min 
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn:E] Stopped
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn] Stopped
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn](INFO): Running loop #43
2017-12-14T07:52:46.618Z,1513237966.618 [Default:CheckIn] Running Loop=43
2017-12-14T07:52:46.619Z,1513237966.619 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T07:52:46.619Z,1513237966.619 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T07:52:49.977Z,1513237969.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:50.067Z,1513237970.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:50.164Z,1513237970.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:50.196Z,1513237970.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:50.575Z,1513237970.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:50.624Z,1513237970.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:50.942Z,1513237970.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:50.962Z,1513237970.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:51.329Z,1513237971.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:51.384Z,1513237971.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:51.715Z,1513237971.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:51.747Z,1513237971.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:52.141Z,1513237972.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:52.163Z,1513237972.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:52.596Z,1513237972.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:52.648Z,1513237972.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:52.943Z,1513237972.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:52.957Z,1513237972.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:53.315Z,1513237973.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:53.342Z,1513237973.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:53.728Z,1513237973.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:53.743Z,1513237973.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:54.116Z,1513237974.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:54.159Z,1513237974.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:54.561Z,1513237974.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:54.622Z,1513237974.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:54.916Z,1513237974.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:54.946Z,1513237974.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:55.326Z,1513237975.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:55.348Z,1513237975.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:55.737Z,1513237975.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:55.773Z,1513237975.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:56.127Z,1513237976.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:56.141Z,1513237976.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:56.525Z,1513237976.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:56.539Z,1513237976.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:56.930Z,1513237976.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:56.965Z,1513237976.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:57.329Z,1513237977.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:57.344Z,1513237977.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:57.727Z,1513237977.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:57.742Z,1513237977.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:58.134Z,1513237978.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:58.149Z,1513237978.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:58.530Z,1513237978.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:58.551Z,1513237978.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:58.953Z,1513237978.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:58.996Z,1513237978.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:59.327Z,1513237979.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:59.342Z,1513237979.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:52:59.727Z,1513237979.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:52:59.782Z,1513237979.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:00.120Z,1513237980.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:00.142Z,1513237980.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:00.569Z,1513237980.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:00.612Z,1513237980.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:00.925Z,1513237980.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:00.966Z,1513237980.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:01.330Z,1513237981.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:01.357Z,1513237981.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:01.748Z,1513237981.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:01.762Z,1513237981.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:02.143Z,1513237982.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:02.172Z,1513237982.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:02.589Z,1513237982.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:02.620Z,1513237982.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:02.936Z,1513237982.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:02.955Z,1513237982.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:03.331Z,1513237983.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:03.351Z,1513237983.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:03.728Z,1513237983.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:03.743Z,1513237983.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:04.138Z,1513237984.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:04.153Z,1513237984.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:04.590Z,1513237984.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:04.605Z,1513237984.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:04.933Z,1513237984.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:04.957Z,1513237984.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:05.340Z,1513237985.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:05.379Z,1513237985.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:05.716Z,1513237985.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:05.751Z,1513237985.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:06.120Z,1513237986.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:06.153Z,1513237986.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:06.575Z,1513237986.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:06.603Z,1513237986.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:06.918Z,1513237986.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:06.955Z,1513237986.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:07.342Z,1513237987.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:07.371Z,1513237987.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:07.745Z,1513237987.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:07.802Z,1513237987.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:08.131Z,1513237988.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:08.163Z,1513237988.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:08.598Z,1513237988.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:08.653Z,1513237988.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:08.933Z,1513237988.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:08.955Z,1513237988.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:09.330Z,1513237989.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:09.346Z,1513237989.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:09.733Z,1513237989.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:09.749Z,1513237989.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:10.132Z,1513237990.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:10.147Z,1513237990.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:10.535Z,1513237990.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:10.572Z,1513237990.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:10.940Z,1513237990.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:10.963Z,1513237990.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:11.332Z,1513237991.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:11.347Z,1513237991.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:11.723Z,1513237991.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:11.811Z,1513237991.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:12.136Z,1513237992.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:12.153Z,1513237992.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:12.520Z,1513237992.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:12.586Z,1513237992.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:12.933Z,1513237992.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:12.981Z,1513237992.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:13.340Z,1513237993.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:13.400Z,1513237993.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:13.743Z,1513237993.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:13.759Z,1513237993.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:14.142Z,1513237994.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:14.156Z,1513237994.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:14.580Z,1513237994.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:14.605Z,1513237994.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:14.912Z,1513237994.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:14.935Z,1513237994.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:15.317Z,1513237995.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:15.347Z,1513237995.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:15.719Z,1513237995.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:15.755Z,1513237995.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:16.131Z,1513237996.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:16.164Z,1513237996.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:16.582Z,1513237996.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:16.613Z,1513237996.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:16.947Z,1513237996.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:16.968Z,1513237996.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:17.326Z,1513237997.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:17.341Z,1513237997.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:17.723Z,1513237997.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:17.751Z,1513237997.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:18.191Z,1513237998.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:18.247Z,1513237998.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:18.582Z,1513237998.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:18.630Z,1513237998.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:18.935Z,1513237998.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:18.952Z,1513237998.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:19.336Z,1513237999.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:19.353Z,1513237999.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:19.737Z,1513237999.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:19.751Z,1513237999.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:20.130Z,1513238000.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:20.151Z,1513238000.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:20.577Z,1513238000.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:20.608Z,1513238000.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:20.909Z,1513238000.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:20.948Z,1513238000.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:21.368Z,1513238001.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:21.439Z,1513238001.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:21.737Z,1513238001.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:21.756Z,1513238001.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:22.140Z,1513238002.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:22.155Z,1513238002.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:22.515Z,1513238002.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:22.607Z,1513238002.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:22.930Z,1513238002.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:22.957Z,1513238002.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:23.331Z,1513238003.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:23.346Z,1513238003.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:23.718Z,1513238003.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:23.751Z,1513238003.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:24.136Z,1513238004.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:24.152Z,1513238004.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:24.537Z,1513238004.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:24.560Z,1513238004.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:24.930Z,1513238004.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:24.962Z,1513238004.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:25.316Z,1513238005.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:25.356Z,1513238005.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:25.716Z,1513238005.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:25.730Z,1513238005.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:26.120Z,1513238006.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:26.136Z,1513238006.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:26.521Z,1513238006.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:26.535Z,1513238006.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:26.919Z,1513238006.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:26.958Z,1513238006.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:27.334Z,1513238007.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:27.370Z,1513238007.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:27.775Z,1513238007.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:27.823Z,1513238007.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:28.126Z,1513238008.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:28.141Z,1513238008.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:28.575Z,1513238008.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:28.594Z,1513238008.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:28.928Z,1513238008.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:28.947Z,1513238008.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:29.325Z,1513238009.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:29.340Z,1513238009.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:29.722Z,1513238009.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:29.742Z,1513238009.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:30.127Z,1513238010.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:30.142Z,1513238010.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:30.581Z,1513238010.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:30.608Z,1513238010.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:30.971Z,1513238010.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:30.991Z,1513238010.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:31.316Z,1513238011.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:31.341Z,1513238011.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:31.715Z,1513238011.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:31.751Z,1513238011.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:32.121Z,1513238012.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:32.144Z,1513238012.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:32.566Z,1513238012.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:32.601Z,1513238012.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:32.938Z,1513238012.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:32.957Z,1513238012.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:33.338Z,1513238013.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:33.398Z,1513238013.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:33.735Z,1513238013.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:33.772Z,1513238013.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:34.164Z,1513238014.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:34.198Z,1513238014.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:34.575Z,1513238014.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:34.635Z,1513238014.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:34.929Z,1513238014.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:34.952Z,1513238014.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:35.329Z,1513238015.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:35.374Z,1513238015.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:35.728Z,1513238015.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:35.743Z,1513238015.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:36.131Z,1513238016.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:36.146Z,1513238016.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:36.549Z,1513238016.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:36.627Z,1513238016.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:36.936Z,1513238016.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:36.951Z,1513238016.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:37.372Z,1513238017.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:37.404Z,1513238017.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:37.723Z,1513238017.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:37.743Z,1513238017.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:38.130Z,1513238018.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:38.151Z,1513238018.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:38.526Z,1513238018.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:38.547Z,1513238018.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:38.933Z,1513238018.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:38.968Z,1513238018.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:39.340Z,1513238019.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:39.355Z,1513238019.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:39.741Z,1513238019.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:39.756Z,1513238019.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:40.132Z,1513238020.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:40.147Z,1513238020.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:40.550Z,1513238020.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:40.594Z,1513238020.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:40.943Z,1513238020.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:40.966Z,1513238020.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:41.320Z,1513238021.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:41.352Z,1513238021.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:41.718Z,1513238021.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:41.748Z,1513238021.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:42.131Z,1513238022.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:42.163Z,1513238022.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:42.579Z,1513238022.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:42.621Z,1513238022.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:42.934Z,1513238022.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:42.966Z,1513238022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:43.327Z,1513238023.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:43.359Z,1513238023.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:43.782Z,1513238023.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:43.836Z,1513238023.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:44.129Z,1513238024.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:44.145Z,1513238024.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:44.576Z,1513238024.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:44.619Z,1513238024.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:44.923Z,1513238024.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:44.954Z,1513238024.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:45.335Z,1513238025.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:45.360Z,1513238025.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:45.734Z,1513238025.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:45.760Z,1513238025.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:46.134Z,1513238026.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:46.158Z,1513238026.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:46.576Z,1513238026.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:46.622Z,1513238026.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:46.947Z,1513238026.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:46.995Z,1513238026.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:50.343Z,1513238030.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:50.379Z,1513238030.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:50.465Z,1513238030.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:50.499Z,1513238030.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:50.840Z,1513238030.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:50.860Z,1513238030.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:51.257Z,1513238031.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:51.280Z,1513238031.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:51.647Z,1513238031.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:51.662Z,1513238031.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:52.027Z,1513238032.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:52.067Z,1513238032.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:52.444Z,1513238032.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:52.458Z,1513238032.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:52.851Z,1513238032.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:52.919Z,1513238032.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:53.237Z,1513238033.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:53.264Z,1513238033.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:53.641Z,1513238033.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:53.671Z,1513238033.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:54.046Z,1513238034.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:54.071Z,1513238034.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:54.434Z,1513238034.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:54.448Z,1513238034.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:54.886Z,1513238034.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:54.928Z,1513238034.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:55.236Z,1513238035.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:55.252Z,1513238035.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:55.630Z,1513238035.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:55.706Z,1513238035.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:56.047Z,1513238036.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:56.067Z,1513238036.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:56.454Z,1513238036.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:56.554Z,1513238036.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:56.845Z,1513238036.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:56.895Z,1513238036.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:57.232Z,1513238037.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:57.246Z,1513238037.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:57.635Z,1513238037.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:57.695Z,1513238037.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:58.034Z,1513238038.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:58.049Z,1513238038.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:58.429Z,1513238038.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:58.443Z,1513238038.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:58.827Z,1513238038.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:58.862Z,1513238038.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:59.255Z,1513238039.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:59.270Z,1513238039.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:53:59.652Z,1513238039.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:53:59.666Z,1513238039.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:00.074Z,1513238040.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:00.089Z,1513238040.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:00.429Z,1513238040.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:00.444Z,1513238040.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:00.831Z,1513238040.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:00.845Z,1513238040.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:01.232Z,1513238041.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:01.247Z,1513238041.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:01.635Z,1513238041.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:01.655Z,1513238041.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:02.042Z,1513238042.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:02.080Z,1513238042.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:02.450Z,1513238042.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:02.543Z,1513238042.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:02.842Z,1513238042.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:02.861Z,1513238042.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:03.227Z,1513238043.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:03.259Z,1513238043.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:03.640Z,1513238043.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:03.659Z,1513238043.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:04.040Z,1513238044.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:04.059Z,1513238044.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:04.442Z,1513238044.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:04.457Z,1513238044.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:04.848Z,1513238044.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:04.867Z,1513238044.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:05.245Z,1513238045.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:05.268Z,1513238045.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:05.653Z,1513238045.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:05.668Z,1513238045.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:06.056Z,1513238046.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:06.107Z,1513238046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:06.428Z,1513238046.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:06.459Z,1513238046.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:06.888Z,1513238046.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:06.923Z,1513238046.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:07.236Z,1513238047.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:07.267Z,1513238047.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:07.632Z,1513238047.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:07.655Z,1513238047.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:08.045Z,1513238048.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:08.060Z,1513238048.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:08.449Z,1513238048.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:08.478Z,1513238048.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:08.871Z,1513238048.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:08.943Z,1513238048.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:09.246Z,1513238049.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:09.292Z,1513238049.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:09.636Z,1513238049.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:09.659Z,1513238049.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:10.030Z,1513238050.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:10.056Z,1513238050.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:10.439Z,1513238050.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:10.453Z,1513238050.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:10.827Z,1513238050.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:10.855Z,1513238050.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:11.258Z,1513238051.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:11.273Z,1513238051.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:11.656Z,1513238051.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:11.670Z,1513238051.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:12.053Z,1513238052.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:12.068Z,1513238052.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:12.465Z,1513238052.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:12.554Z,1513238052.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:12.834Z,1513238052.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:12.870Z,1513238052.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:13.235Z,1513238053.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:13.274Z,1513238053.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:13.635Z,1513238053.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:13.675Z,1513238053.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:14.046Z,1513238054.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:14.078Z,1513238054.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:14.446Z,1513238054.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:14.478Z,1513238054.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:14.840Z,1513238054.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:14.856Z,1513238054.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:15.235Z,1513238055.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:15.254Z,1513238055.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:15.642Z,1513238055.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:15.657Z,1513238055.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:16.044Z,1513238056.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:16.059Z,1513238056.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:16.444Z,1513238056.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:16.458Z,1513238056.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:16.840Z,1513238056.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:16.868Z,1513238056.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:17.238Z,1513238057.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:17.272Z,1513238057.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:17.650Z,1513238057.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:17.699Z,1513238057.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:18.046Z,1513238058.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:18.098Z,1513238058.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:18.440Z,1513238058.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:18.478Z,1513238058.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:18.835Z,1513238058.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:18.915Z,1513238058.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:19.247Z,1513238059.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:19.264Z,1513238059.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:19.634Z,1513238059.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:19.694Z,1513238059.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:20.051Z,1513238060.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:20.067Z,1513238060.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:20.447Z,1513238060.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:20.463Z,1513238060.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:20.874Z,1513238060.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:20.927Z,1513238060.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:21.227Z,1513238061.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:21.271Z,1513238061.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:21.625Z,1513238061.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:21.640Z,1513238061.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:22.031Z,1513238062.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:22.083Z,1513238062.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:22.106Z,1513238062.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:22.434Z,1513238062.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:22.448Z,1513238062.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:22.838Z,1513238062.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:22.902Z,1513238062.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:22.918Z,1513238062.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:23.242Z,1513238063.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:23.257Z,1513238063.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:23.305Z,1513238063.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:23.642Z,1513238063.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:23.656Z,1513238063.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:24.038Z,1513238064.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:24.054Z,1513238064.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:24.430Z,1513238064.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:24.453Z,1513238064.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:24.836Z,1513238064.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:24.859Z,1513238064.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:25.258Z,1513238065.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:25.297Z,1513238065.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:25.627Z,1513238065.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:25.663Z,1513238065.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:26.053Z,1513238066.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:26.068Z,1513238066.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:26.433Z,1513238066.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:26.467Z,1513238066.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:26.837Z,1513238066.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:26.860Z,1513238066.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:27.244Z,1513238067.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:27.274Z,1513238067.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:27.631Z,1513238067.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:27.651Z,1513238067.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:28.033Z,1513238068.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:28.083Z,1513238068.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:28.502Z,1513238068.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:28.577Z,1513238068.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:28.835Z,1513238068.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:28.850Z,1513238068.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:29.240Z,1513238069.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:29.259Z,1513238069.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:29.645Z,1513238069.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:29.660Z,1513238069.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:30.042Z,1513238070.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:30.057Z,1513238070.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:30.437Z,1513238070.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:30.452Z,1513238070.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:30.827Z,1513238070.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:30.861Z,1513238070.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:31.228Z,1513238071.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:31.254Z,1513238071.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:31.627Z,1513238071.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:31.658Z,1513238071.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:32.041Z,1513238072.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:32.068Z,1513238072.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:32.437Z,1513238072.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:32.471Z,1513238072.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:32.838Z,1513238072.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:32.864Z,1513238072.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:33.227Z,1513238073.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:33.242Z,1513238073.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:33.631Z,1513238073.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:33.651Z,1513238073.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:34.033Z,1513238074.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:34.048Z,1513238074.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:34.437Z,1513238074.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:34.452Z,1513238074.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:34.876Z,1513238074.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:34.932Z,1513238074.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:35.238Z,1513238075.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:35.254Z,1513238075.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:35.641Z,1513238075.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:35.664Z,1513238075.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:36.042Z,1513238076.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:36.057Z,1513238076.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:36.114Z,1513238076.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:36.439Z,1513238076.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:36.454Z,1513238076.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:36.891Z,1513238076.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:36.911Z,1513238076.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:36.946Z,1513238076.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:37.229Z,1513238077.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:37.263Z,1513238077.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:37.317Z,1513238077.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:37.627Z,1513238077.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:37.660Z,1513238077.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:38.057Z,1513238078.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:38.072Z,1513238078.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:38.441Z,1513238078.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:38.467Z,1513238078.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:38.846Z,1513238078.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:38.879Z,1513238078.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:39.233Z,1513238079.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:39.247Z,1513238079.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:39.636Z,1513238079.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:39.679Z,1513238079.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:40.032Z,1513238080.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:40.052Z,1513238080.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:40.436Z,1513238080.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:40.556Z,1513238080.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:40.827Z,1513238080.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:40.858Z,1513238080.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:41.264Z,1513238081.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:41.287Z,1513238081.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:41.662Z,1513238081.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:41.707Z,1513238081.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:42.055Z,1513238082.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:42.073Z,1513238082.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:42.427Z,1513238082.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:42.506Z,1513238082.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:42.824Z,1513238082.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:42.839Z,1513238082.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:43.228Z,1513238083.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:43.247Z,1513238083.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:43.635Z,1513238083.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:43.671Z,1513238083.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:44.049Z,1513238084.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:44.078Z,1513238084.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:44.447Z,1513238084.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:44.551Z,1513238084.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:44.851Z,1513238084.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:44.880Z,1513238084.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:45.231Z,1513238085.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:45.259Z,1513238085.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:45.633Z,1513238085.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:45.648Z,1513238085.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:46.033Z,1513238086.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:46.055Z,1513238086.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:46.438Z,1513238086.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:46.452Z,1513238086.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:46.834Z,1513238086.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:46.861Z,1513238086.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:47.247Z,1513238087.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:47.267Z,1513238087.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:50.089Z,1513238090.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:50.631Z,1513238090.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:50.691Z,1513238090.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:50.797Z,1513238090.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:50.813Z,1513238090.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:50.887Z,1513238090.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:51.156Z,1513238091.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:51.171Z,1513238091.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:51.333Z,1513238091.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:51.555Z,1513238091.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:51.589Z,1513238091.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:51.950Z,1513238091.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:51.972Z,1513238091.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:52.131Z,1513238092.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:52.361Z,1513238092.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:52.376Z,1513238092.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:52.757Z,1513238092.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:52.790Z,1513238092.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:52.929Z,1513238092.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:53.159Z,1513238093.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:53.182Z,1513238093.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:53.547Z,1513238093.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:53.576Z,1513238093.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:53.939Z,1513238093.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:53.974Z,1513238093.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:54.354Z,1513238094.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:54.370Z,1513238094.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:54.739Z,1513238094.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:54.783Z,1513238094.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:55.169Z,1513238095.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:55.184Z,1513238095.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:55.556Z,1513238095.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:55.584Z,1513238095.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:55.966Z,1513238095.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:55.987Z,1513238095.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:56.343Z,1513238096.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:56.383Z,1513238096.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:56.766Z,1513238096.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:56.775Z,1513238096.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x31562 got:0x24491
2017-12-14T07:54:56.813Z,1513238096.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:57.160Z,1513238097.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:57.223Z,1513238097.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:57.542Z,1513238097.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:57.575Z,1513238097.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:57.943Z,1513238097.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:57.991Z,1513238097.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:58.368Z,1513238098.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:58.375Z,1513238098.375 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T07:54:58.396Z,1513238098.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:58.770Z,1513238098.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:58.791Z,1513238098.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:59.164Z,1513238099.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:59.180Z,1513238099.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:59.539Z,1513238099.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:59.578Z,1513238099.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:54:59.939Z,1513238099.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:54:59.979Z,1513238099.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:00.362Z,1513238100.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:00.398Z,1513238100.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:00.777Z,1513238100.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:00.799Z,1513238100.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:01.178Z,1513238101.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:01.192Z,1513238101.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:01.567Z,1513238101.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:01.584Z,1513238101.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:01.794Z,1513238101.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:01.966Z,1513238101.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:01.988Z,1513238101.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:02.349Z,1513238102.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:02.375Z,1513238102.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:02.589Z,1513238102.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:02.748Z,1513238102.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:02.888Z,1513238102.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:03.155Z,1513238103.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:03.191Z,1513238103.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:03.548Z,1513238103.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:03.655Z,1513238103.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:03.952Z,1513238103.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:03.967Z,1513238103.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:04.363Z,1513238104.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:04.437Z,1513238104.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:04.762Z,1513238104.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:04.793Z,1513238104.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:05.164Z,1513238105.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:05.188Z,1513238105.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:05.559Z,1513238105.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:05.579Z,1513238105.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:05.954Z,1513238105.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:05.980Z,1513238105.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:06.355Z,1513238106.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:06.376Z,1513238106.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:06.739Z,1513238106.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:06.809Z,1513238106.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:07.156Z,1513238107.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:07.192Z,1513238107.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:07.548Z,1513238107.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:07.596Z,1513238107.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:07.955Z,1513238107.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:07.987Z,1513238107.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:08.339Z,1513238108.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:08.382Z,1513238108.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:08.748Z,1513238108.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:08.778Z,1513238108.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:09.146Z,1513238109.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:09.191Z,1513238109.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:09.548Z,1513238109.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:09.585Z,1513238109.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:09.952Z,1513238109.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:09.988Z,1513238109.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:10.362Z,1513238110.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:10.391Z,1513238110.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:10.763Z,1513238110.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:10.807Z,1513238110.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:11.162Z,1513238111.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:11.188Z,1513238111.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:11.550Z,1513238111.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:11.579Z,1513238111.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:11.949Z,1513238111.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:11.963Z,1513238111.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:12.351Z,1513238112.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:12.391Z,1513238112.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:12.749Z,1513238112.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:12.796Z,1513238112.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:13.191Z,1513238113.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:13.232Z,1513238113.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:13.556Z,1513238113.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:13.572Z,1513238113.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:13.958Z,1513238113.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:14.003Z,1513238114.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:14.350Z,1513238114.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:14.364Z,1513238114.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x49214 got:0x215
2017-12-14T07:55:14.384Z,1513238114.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:14.751Z,1513238114.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:14.775Z,1513238114.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:15.153Z,1513238115.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:15.168Z,1513238115.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:15.550Z,1513238115.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:15.578Z,1513238115.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:15.936Z,1513238115.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:15.972Z,1513238115.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:16.398Z,1513238116.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:16.426Z,1513238116.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:16.767Z,1513238116.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:16.787Z,1513238116.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:17.155Z,1513238117.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:17.189Z,1513238117.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:17.543Z,1513238117.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:17.568Z,1513238117.568 [PNI_TCM](ERROR): CRC does not match. Expected:0x27994 got:0x6591
2017-12-14T07:55:17.608Z,1513238117.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:17.960Z,1513238117.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:17.974Z,1513238117.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:18.358Z,1513238118.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:18.372Z,1513238118.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:18.761Z,1513238118.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:18.784Z,1513238118.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:19.165Z,1513238119.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:19.187Z,1513238119.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:19.573Z,1513238119.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:19.596Z,1513238119.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:19.959Z,1513238119.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:19.982Z,1513238119.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:20.348Z,1513238120.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:20.386Z,1513238120.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:20.747Z,1513238120.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:20.778Z,1513238120.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:21.153Z,1513238121.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:21.168Z,1513238121.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:21.557Z,1513238121.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:21.593Z,1513238121.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:22.010Z,1513238122.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:22.043Z,1513238122.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:22.357Z,1513238122.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:22.385Z,1513238122.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:22.803Z,1513238122.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:22.842Z,1513238122.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:23.178Z,1513238123.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:23.208Z,1513238123.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:23.554Z,1513238123.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:23.592Z,1513238123.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:23.956Z,1513238123.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:23.978Z,1513238123.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:24.360Z,1513238124.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:24.383Z,1513238124.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:24.752Z,1513238124.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:24.814Z,1513238124.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:25.167Z,1513238125.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:25.230Z,1513238125.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:25.559Z,1513238125.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:25.593Z,1513238125.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:25.968Z,1513238125.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:25.984Z,1513238125.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:26.343Z,1513238126.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:26.399Z,1513238126.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:26.740Z,1513238126.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:26.793Z,1513238126.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:27.144Z,1513238127.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:27.192Z,1513238127.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:27.550Z,1513238127.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:27.577Z,1513238127.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:27.975Z,1513238127.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:27.994Z,1513238127.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:28.354Z,1513238128.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:28.397Z,1513238128.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:28.757Z,1513238128.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:28.781Z,1513238128.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:29.182Z,1513238129.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:29.205Z,1513238129.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:29.562Z,1513238129.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:29.589Z,1513238129.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:29.951Z,1513238129.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:29.985Z,1513238129.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:30.344Z,1513238130.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:30.376Z,1513238130.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:30.753Z,1513238130.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:30.767Z,1513238130.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:31.163Z,1513238131.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:31.187Z,1513238131.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:31.556Z,1513238131.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:31.589Z,1513238131.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:31.962Z,1513238131.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:31.968Z,1513238131.968 [PNI_TCM](ERROR): CRC does not match. Expected:0x1944 got:0x7490
2017-12-14T07:55:31.999Z,1513238131.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:32.394Z,1513238132.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:32.454Z,1513238132.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:32.755Z,1513238132.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:32.774Z,1513238132.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.144Z,1513238133.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:33.182Z,1513238133.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.540Z,1513238133.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:33.581Z,1513238133.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.936Z,1513238133.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:33.975Z,1513238133.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.975Z,1513238133.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148
2017-12-14T07:55:33.976Z,1513238133.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:55:33.982Z,1513238133.982 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.982Z,1513238133.982 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 148
2017-12-14T07:55:33.982Z,1513238133.982 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:55:33.984Z,1513238133.984 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:33.984Z,1513238133.984 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2017-12-14T07:55:33.984Z,1513238133.984 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:55:34.009Z,1513238134.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:55:34.009Z,1513238134.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:55:34.009Z,1513238134.009 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:55:34.365Z,1513238134.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:34.412Z,1513238134.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:55:34.412Z,1513238134.412 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148
2017-12-14T07:55:34.412Z,1513238134.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:55:34.412Z,1513238134.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 148
2017-12-14T07:55:34.413Z,1513238134.413 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:55:34.413Z,1513238134.413 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2017-12-14T07:55:34.781Z,1513238134.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:34.795Z,1513238134.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:55:34.795Z,1513238134.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:55:34.795Z,1513238134.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:55:34.796Z,1513238134.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:55:34.796Z,1513238134.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:55:34.796Z,1513238134.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:55:34.798Z,1513238134.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:55:34.798Z,1513238134.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:55:34.798Z,1513238134.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:55:35.163Z,1513238135.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:35.186Z,1513238135.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:35.561Z,1513238135.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:35.618Z,1513238135.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:35.955Z,1513238135.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:35.975Z,1513238135.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:36.350Z,1513238136.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:36.396Z,1513238136.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:36.748Z,1513238136.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:36.770Z,1513238136.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:37.163Z,1513238137.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:37.208Z,1513238137.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:37.567Z,1513238137.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:37.582Z,1513238137.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:37.959Z,1513238137.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:37.981Z,1513238137.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:38.339Z,1513238138.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:38.380Z,1513238138.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:38.763Z,1513238138.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:38.778Z,1513238138.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x16876 got:0x7233
2017-12-14T07:55:38.803Z,1513238138.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:39.143Z,1513238139.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:39.175Z,1513238139.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:39.558Z,1513238139.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:39.588Z,1513238139.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:39.932Z,1513238139.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:39.978Z,1513238139.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:40.371Z,1513238140.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:40.385Z,1513238140.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:40.764Z,1513238140.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:40.784Z,1513238140.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:41.154Z,1513238141.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:41.183Z,1513238141.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:41.542Z,1513238141.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:41.581Z,1513238141.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:41.947Z,1513238141.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:42.017Z,1513238142.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:42.346Z,1513238142.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:42.374Z,1513238142.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:42.739Z,1513238142.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:42.787Z,1513238142.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:43.166Z,1513238143.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:43.190Z,1513238143.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:43.571Z,1513238143.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:43.586Z,1513238143.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:43.955Z,1513238143.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:43.981Z,1513238143.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:44.340Z,1513238144.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:44.389Z,1513238144.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:44.743Z,1513238144.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:44.788Z,1513238144.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:45.197Z,1513238145.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:45.242Z,1513238145.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:45.559Z,1513238145.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:45.584Z,1513238145.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:45.964Z,1513238145.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:46.000Z,1513238146.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:46.366Z,1513238146.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:46.395Z,1513238146.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:46.762Z,1513238146.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:46.795Z,1513238146.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:47.145Z,1513238147.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:47.189Z,1513238147.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:47.549Z,1513238147.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:47.611Z,1513238147.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:51.048Z,1513238151.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:51.057Z,1513238151.057 [BPC1](ERROR): Failed to receive battery data
2017-12-14T07:55:51.057Z,1513238151.057 [BPC1] Communications Fault, FailCount= 1
2017-12-14T07:55:51.057Z,1513238151.057 [BPC1](ERROR): Communications Fault
2017-12-14T07:55:51.065Z,1513238151.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:51.078Z,1513238151.078 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T07:55:51.178Z,1513238151.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:51.203Z,1513238151.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:51.539Z,1513238151.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:51.563Z,1513238151.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:51.945Z,1513238151.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:51.967Z,1513238151.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:51.981Z,1513238151.981 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:55:51.981Z,1513238151.981 [BPC1] No Fault, FailCount= 1
2017-12-14T07:55:52.315Z,1513238152.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:52.402Z,1513238152.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:52.717Z,1513238152.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:52.732Z,1513238152.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:53.115Z,1513238153.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:53.130Z,1513238153.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:53.524Z,1513238153.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:53.564Z,1513238153.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:53.922Z,1513238153.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:53.936Z,1513238153.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:54.333Z,1513238154.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:54.373Z,1513238154.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:54.762Z,1513238154.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:54.785Z,1513238154.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:55.125Z,1513238155.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:55.166Z,1513238155.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:55.523Z,1513238155.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:55.548Z,1513238155.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:55.913Z,1513238155.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:55.975Z,1513238155.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:56.316Z,1513238156.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:56.347Z,1513238156.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:56.711Z,1513238156.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:56.750Z,1513238156.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:57.123Z,1513238157.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:57.150Z,1513238157.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:57.540Z,1513238157.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:57.562Z,1513238157.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:57.924Z,1513238157.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:57.999Z,1513238157.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:58.312Z,1513238158.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:58.359Z,1513238158.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:58.715Z,1513238158.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:58.747Z,1513238158.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:59.123Z,1513238159.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:59.159Z,1513238159.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:59.511Z,1513238159.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:59.531Z,1513238159.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:55:59.916Z,1513238159.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:55:59.962Z,1513238159.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:00.334Z,1513238160.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:00.361Z,1513238160.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:00.734Z,1513238160.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:00.805Z,1513238160.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:01.149Z,1513238161.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:01.183Z,1513238161.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:01.512Z,1513238161.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:01.551Z,1513238161.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:01.925Z,1513238161.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:01.973Z,1513238161.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:02.317Z,1513238162.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:02.346Z,1513238162.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:02.721Z,1513238162.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:02.759Z,1513238162.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:03.130Z,1513238163.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:03.175Z,1513238163.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:03.530Z,1513238163.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:03.557Z,1513238163.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:03.930Z,1513238163.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:03.964Z,1513238163.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:04.325Z,1513238164.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:04.367Z,1513238164.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:04.722Z,1513238164.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:04.746Z,1513238164.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:05.124Z,1513238165.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:05.138Z,1513238165.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:05.516Z,1513238165.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:05.544Z,1513238165.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:05.921Z,1513238165.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:05.935Z,1513238165.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:06.339Z,1513238166.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:06.356Z,1513238166.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:06.735Z,1513238166.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:06.783Z,1513238166.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:07.130Z,1513238167.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:07.150Z,1513238167.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:07.519Z,1513238167.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:07.539Z,1513238167.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:07.935Z,1513238167.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:07.955Z,1513238167.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:08.315Z,1513238168.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:08.352Z,1513238168.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:08.735Z,1513238168.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:08.750Z,1513238168.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:09.134Z,1513238169.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:09.158Z,1513238169.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:09.539Z,1513238169.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:09.563Z,1513238169.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:09.940Z,1513238169.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:09.983Z,1513238169.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:10.312Z,1513238170.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:10.348Z,1513238170.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:10.724Z,1513238170.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:10.774Z,1513238170.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:11.111Z,1513238171.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:11.144Z,1513238171.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:11.512Z,1513238171.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:11.560Z,1513238171.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:11.919Z,1513238171.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:11.934Z,1513238171.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:12.337Z,1513238172.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:12.375Z,1513238172.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:12.737Z,1513238172.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:12.803Z,1513238172.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:13.141Z,1513238173.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:13.183Z,1513238173.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:13.520Z,1513238173.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:13.582Z,1513238173.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:13.966Z,1513238173.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:14.006Z,1513238174.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:14.330Z,1513238174.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:14.351Z,1513238174.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:14.720Z,1513238174.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:14.743Z,1513238174.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:15.125Z,1513238175.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:15.140Z,1513238175.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:15.537Z,1513238175.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:15.572Z,1513238175.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:15.925Z,1513238175.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:15.947Z,1513238175.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:16.308Z,1513238176.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:16.331Z,1513238176.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:16.720Z,1513238176.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:16.739Z,1513238176.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:17.133Z,1513238177.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:17.188Z,1513238177.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:17.513Z,1513238177.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:17.559Z,1513238177.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:17.923Z,1513238177.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:17.953Z,1513238177.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:18.330Z,1513238178.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:18.346Z,1513238178.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:18.733Z,1513238178.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:18.755Z,1513238178.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:19.131Z,1513238179.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:19.153Z,1513238179.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:19.525Z,1513238179.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:19.552Z,1513238179.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:19.910Z,1513238179.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:19.948Z,1513238179.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:20.353Z,1513238180.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:20.398Z,1513238180.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:20.711Z,1513238180.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:20.751Z,1513238180.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:21.134Z,1513238181.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:21.158Z,1513238181.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:21.536Z,1513238181.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:21.562Z,1513238181.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:21.924Z,1513238181.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:21.982Z,1513238181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:22.314Z,1513238182.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:22.358Z,1513238182.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:22.722Z,1513238182.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:22.776Z,1513238182.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:23.121Z,1513238183.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:23.170Z,1513238183.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:23.523Z,1513238183.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:23.627Z,1513238183.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:23.921Z,1513238183.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:23.996Z,1513238183.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:24.360Z,1513238184.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:24.426Z,1513238184.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:24.729Z,1513238184.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:24.779Z,1513238184.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:25.162Z,1513238185.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:25.185Z,1513238185.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:25.547Z,1513238185.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:25.594Z,1513238185.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:25.922Z,1513238185.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:25.987Z,1513238185.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:26.324Z,1513238186.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:26.376Z,1513238186.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:26.743Z,1513238186.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:26.797Z,1513238186.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:27.137Z,1513238187.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:27.160Z,1513238187.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:27.537Z,1513238187.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:27.583Z,1513238187.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:27.957Z,1513238187.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:27.975Z,1513238187.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:28.317Z,1513238188.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:28.367Z,1513238188.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:28.731Z,1513238188.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:28.762Z,1513238188.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:29.170Z,1513238189.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:29.202Z,1513238189.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:29.511Z,1513238189.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:29.562Z,1513238189.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:29.959Z,1513238189.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:29.973Z,1513238189.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:30.357Z,1513238190.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:30.407Z,1513238190.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:30.747Z,1513238190.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:30.806Z,1513238190.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:31.142Z,1513238191.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:31.203Z,1513238191.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:31.512Z,1513238191.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:31.556Z,1513238191.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:31.918Z,1513238191.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:31.963Z,1513238191.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:32.314Z,1513238192.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:32.347Z,1513238192.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:32.713Z,1513238192.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:32.767Z,1513238192.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:33.161Z,1513238193.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:33.255Z,1513238193.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:33.557Z,1513238193.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:33.621Z,1513238193.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:33.936Z,1513238193.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:33.987Z,1513238193.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:34.323Z,1513238194.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:34.348Z,1513238194.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:34.717Z,1513238194.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:34.794Z,1513238194.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:35.124Z,1513238195.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:35.177Z,1513238195.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:35.524Z,1513238195.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:35.548Z,1513238195.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:35.938Z,1513238195.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:35.986Z,1513238195.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:36.336Z,1513238196.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:36.379Z,1513238196.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:36.751Z,1513238196.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:36.806Z,1513238196.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:37.152Z,1513238197.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:37.175Z,1513238197.175 [BPC1](ERROR): Failed to receive battery data
2017-12-14T07:56:37.175Z,1513238197.175 [BPC1] Communications Fault, FailCount= 1
2017-12-14T07:56:37.176Z,1513238197.176 [BPC1](ERROR): Communications Fault
2017-12-14T07:56:37.256Z,1513238197.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:37.335Z,1513238197.335 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T07:56:37.556Z,1513238197.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:37.604Z,1513238197.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:37.924Z,1513238197.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:37.982Z,1513238197.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:38.331Z,1513238198.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:38.395Z,1513238198.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:38.450Z,1513238198.450 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T07:56:38.450Z,1513238198.450 [BPC1] No Fault, FailCount= 1
2017-12-14T07:56:38.731Z,1513238198.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:38.846Z,1513238198.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:39.146Z,1513238199.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:39.182Z,1513238199.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:39.551Z,1513238199.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:39.606Z,1513238199.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:39.940Z,1513238199.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:39.993Z,1513238199.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:40.318Z,1513238200.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:40.387Z,1513238200.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:40.712Z,1513238200.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:40.743Z,1513238200.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:41.112Z,1513238201.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:41.163Z,1513238201.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:41.514Z,1513238201.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:41.559Z,1513238201.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:41.912Z,1513238201.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:41.960Z,1513238201.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:42.333Z,1513238202.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:42.368Z,1513238202.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:42.737Z,1513238202.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:42.775Z,1513238202.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:43.147Z,1513238203.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:43.187Z,1513238203.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:43.534Z,1513238203.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:43.587Z,1513238203.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:43.913Z,1513238203.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:43.944Z,1513238203.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:44.313Z,1513238204.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:44.403Z,1513238204.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:44.763Z,1513238204.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:44.804Z,1513238204.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:45.132Z,1513238205.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:45.191Z,1513238205.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:45.533Z,1513238205.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:45.553Z,1513238205.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:45.935Z,1513238205.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:45.957Z,1513238205.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:46.316Z,1513238206.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:46.351Z,1513238206.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:46.711Z,1513238206.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:46.762Z,1513238206.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:47.115Z,1513238207.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:47.166Z,1513238207.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:47.512Z,1513238207.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:47.548Z,1513238207.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:47.915Z,1513238207.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:47.951Z,1513238207.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:51.530Z,1513238211.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:51.546Z,1513238211.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:51.659Z,1513238211.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:51.687Z,1513238211.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:52.004Z,1513238212.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:52.031Z,1513238212.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:52.410Z,1513238212.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:52.425Z,1513238212.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:52.806Z,1513238212.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:52.822Z,1513238212.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:53.206Z,1513238213.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:53.221Z,1513238213.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:53.598Z,1513238213.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:53.627Z,1513238213.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:54.002Z,1513238214.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:54.029Z,1513238214.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:54.414Z,1513238214.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:54.431Z,1513238214.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:54.879Z,1513238214.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:54.926Z,1513238214.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:55.196Z,1513238215.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:55.215Z,1513238215.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:55.597Z,1513238215.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:55.611Z,1513238215.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:56.014Z,1513238216.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:56.039Z,1513238216.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:56.410Z,1513238216.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:56.434Z,1513238216.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:56.883Z,1513238216.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:56.914Z,1513238216.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:57.201Z,1513238217.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:57.224Z,1513238217.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:57.595Z,1513238217.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:57.655Z,1513238217.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:58.003Z,1513238218.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:58.061Z,1513238218.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:58.397Z,1513238218.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:58.412Z,1513238218.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:58.803Z,1513238218.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:58.819Z,1513238218.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:59.213Z,1513238219.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:59.280Z,1513238219.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:59.617Z,1513238219.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:56:59.693Z,1513238219.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:56:59.998Z,1513238219.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:00.046Z,1513238220.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:00.400Z,1513238220.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:00.415Z,1513238220.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:00.800Z,1513238220.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:00.814Z,1513238220.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:01.200Z,1513238221.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:01.215Z,1513238221.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:01.601Z,1513238221.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:01.615Z,1513238221.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:02.009Z,1513238222.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:02.024Z,1513238222.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:02.398Z,1513238222.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:02.415Z,1513238222.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:02.816Z,1513238222.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:02.844Z,1513238222.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:03.202Z,1513238223.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:03.255Z,1513238223.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:03.600Z,1513238223.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:03.615Z,1513238223.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:04.017Z,1513238224.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:04.042Z,1513238224.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:04.413Z,1513238224.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:04.446Z,1513238224.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:04.806Z,1513238224.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:04.829Z,1513238224.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:05.191Z,1513238225.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:05.223Z,1513238225.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:05.591Z,1513238225.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:05.621Z,1513238225.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:06.014Z,1513238226.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:06.029Z,1513238226.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:06.447Z,1513238226.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:06.483Z,1513238226.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:06.887Z,1513238226.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:06.903Z,1513238226.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:07.196Z,1513238227.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:07.211Z,1513238227.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:07.596Z,1513238227.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:07.610Z,1513238227.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:07.995Z,1513238227.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:08.009Z,1513238228.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:08.393Z,1513238228.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:08.439Z,1513238228.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:08.794Z,1513238228.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:08.811Z,1513238228.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:09.209Z,1513238229.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:09.224Z,1513238229.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:09.606Z,1513238229.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:09.621Z,1513238229.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:10.001Z,1513238230.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:10.024Z,1513238230.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:10.400Z,1513238230.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:10.419Z,1513238230.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:10.796Z,1513238230.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:10.811Z,1513238230.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:11.196Z,1513238231.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:11.221Z,1513238231.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:11.594Z,1513238231.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:11.615Z,1513238231.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:12.007Z,1513238232.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:12.022Z,1513238232.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:12.409Z,1513238232.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:12.424Z,1513238232.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:12.837Z,1513238232.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:12.856Z,1513238232.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:13.191Z,1513238233.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:13.206Z,1513238233.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:13.591Z,1513238233.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:13.611Z,1513238233.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:13.992Z,1513238233.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:14.008Z,1513238234.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:14.396Z,1513238234.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:14.412Z,1513238234.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:14.792Z,1513238234.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:14.811Z,1513238234.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:15.216Z,1513238235.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:15.249Z,1513238235.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:15.610Z,1513238235.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:15.635Z,1513238235.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:16.014Z,1513238236.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:16.060Z,1513238236.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:16.393Z,1513238236.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:16.408Z,1513238236.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:16.791Z,1513238236.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:16.819Z,1513238236.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:17.196Z,1513238237.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:17.227Z,1513238237.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:17.598Z,1513238237.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:17.625Z,1513238237.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:18.029Z,1513238238.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:18.044Z,1513238238.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:18.418Z,1513238238.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:18.439Z,1513238238.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:18.826Z,1513238238.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:18.887Z,1513238238.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:19.204Z,1513238239.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:19.259Z,1513238239.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:19.599Z,1513238239.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:19.619Z,1513238239.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:20.010Z,1513238240.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:20.025Z,1513238240.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:20.417Z,1513238240.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:20.466Z,1513238240.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:20.806Z,1513238240.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:20.827Z,1513238240.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:21.208Z,1513238241.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:21.266Z,1513238241.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:21.603Z,1513238241.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:21.619Z,1513238241.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:22.017Z,1513238242.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:22.048Z,1513238242.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:22.404Z,1513238242.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:22.440Z,1513238242.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:22.831Z,1513238242.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:22.911Z,1513238242.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:23.192Z,1513238243.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:23.220Z,1513238243.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:23.602Z,1513238243.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:23.628Z,1513238243.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:24.113Z,1513238244.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:24.143Z,1513238244.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:24.418Z,1513238244.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:24.448Z,1513238244.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:24.812Z,1513238244.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:24.908Z,1513238244.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:25.200Z,1513238245.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:25.228Z,1513238245.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:25.633Z,1513238245.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:25.688Z,1513238245.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:26.018Z,1513238246.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:26.033Z,1513238246.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:26.421Z,1513238246.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:26.436Z,1513238246.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:26.814Z,1513238246.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:26.848Z,1513238246.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:27.202Z,1513238247.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:27.218Z,1513238247.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:27.598Z,1513238247.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:27.617Z,1513238247.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:28.018Z,1513238248.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:28.098Z,1513238248.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:28.405Z,1513238248.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:28.419Z,1513238248.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:28.851Z,1513238248.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:28.875Z,1513238248.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:29.198Z,1513238249.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:29.220Z,1513238249.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:29.591Z,1513238249.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:29.658Z,1513238249.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:29.996Z,1513238249.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:30.022Z,1513238250.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:30.408Z,1513238250.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:30.431Z,1513238250.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:30.805Z,1513238250.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:30.833Z,1513238250.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:31.211Z,1513238251.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:31.236Z,1513238251.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:31.626Z,1513238251.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:31.647Z,1513238251.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:32.028Z,1513238252.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:32.059Z,1513238252.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:32.395Z,1513238252.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:32.415Z,1513238252.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:32.802Z,1513238252.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:32.816Z,1513238252.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:33.204Z,1513238253.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:33.218Z,1513238253.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:33.596Z,1513238253.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:33.611Z,1513238253.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:34.006Z,1513238254.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:34.021Z,1513238254.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:34.409Z,1513238254.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:34.424Z,1513238254.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:34.818Z,1513238254.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:34.843Z,1513238254.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:35.237Z,1513238255.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:35.270Z,1513238255.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:35.601Z,1513238255.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:35.623Z,1513238255.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:36.014Z,1513238256.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:36.047Z,1513238256.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:36.418Z,1513238256.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:36.448Z,1513238256.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:36.812Z,1513238256.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:36.910Z,1513238256.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:37.205Z,1513238257.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:37.220Z,1513238257.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:37.599Z,1513238257.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:37.618Z,1513238257.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:38.017Z,1513238258.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:38.052Z,1513238258.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:38.456Z,1513238258.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:38.479Z,1513238258.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:38.807Z,1513238258.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:38.968Z,1513238258.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:39.206Z,1513238259.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:39.221Z,1513238259.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:39.605Z,1513238259.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:39.620Z,1513238259.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:40.005Z,1513238260.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:40.056Z,1513238260.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:40.409Z,1513238260.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:40.468Z,1513238260.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:40.814Z,1513238260.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:40.829Z,1513238260.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:41.200Z,1513238261.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:41.266Z,1513238261.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:41.631Z,1513238261.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:41.669Z,1513238261.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:42.001Z,1513238262.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:42.066Z,1513238262.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:42.415Z,1513238262.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:42.435Z,1513238262.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:42.817Z,1513238262.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:42.843Z,1513238262.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:43.197Z,1513238263.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:43.213Z,1513238263.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:43.599Z,1513238263.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:43.619Z,1513238263.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:43.997Z,1513238263.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:44.012Z,1513238264.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:44.413Z,1513238264.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:44.447Z,1513238264.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:44.842Z,1513238264.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:44.869Z,1513238264.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:45.200Z,1513238265.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:45.220Z,1513238265.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:45.603Z,1513238265.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:45.618Z,1513238265.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:46.006Z,1513238266.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:46.027Z,1513238266.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:46.406Z,1513238266.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:46.420Z,1513238266.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:46.806Z,1513238266.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:46.821Z,1513238266.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:46.824Z,1513238266.824 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T07:52:46.6Z
2017-12-14T07:57:46.824Z,1513238266.824 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T07:57:46.825Z,1513238266.825 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T07:57:47.209Z,1513238267.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:47.236Z,1513238267.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:47.974Z,1513238267.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:48.019Z,1513238268.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:48.165Z,1513238268.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:48.199Z,1513238268.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:51.645Z,1513238271.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:51.699Z,1513238271.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:51.778Z,1513238271.778 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0172.lzma
2017-12-14T07:57:51.799Z,1513238271.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:51.832Z,1513238271.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:52.190Z,1513238272.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:52.211Z,1513238272.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:52.547Z,1513238272.547 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0172.lzma.bak
2017-12-14T07:57:52.548Z,1513238272.548 [DataOverHttps](INFO): SBD MOMSN=5438303
2017-12-14T07:57:52.592Z,1513238272.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:52.625Z,1513238272.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:54.095Z,1513238274.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:54.115Z,1513238274.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:54.224Z,1513238274.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:54.267Z,1513238274.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:58.091Z,1513238278.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:58.106Z,1513238278.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:58.201Z,1513238278.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:58.244Z,1513238278.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:58.588Z,1513238278.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:58.608Z,1513238278.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:58.985Z,1513238278.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:59.000Z,1513238279.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:59.374Z,1513238279.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:59.404Z,1513238279.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:57:59.759Z,1513238279.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:57:59.795Z,1513238279.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:03.501Z,1513238283.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:03.582Z,1513238283.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:03.657Z,1513238283.657 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0173.lzma
2017-12-14T07:58:03.680Z,1513238283.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:03.719Z,1513238283.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:04.102Z,1513238284.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:04.127Z,1513238284.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:04.427Z,1513238284.427 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0173.lzma.bak
2017-12-14T07:58:04.427Z,1513238284.427 [DataOverHttps](INFO): SBD MOMSN=5438306
2017-12-14T07:58:04.471Z,1513238284.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:04.511Z,1513238284.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:05.682Z,1513238285.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:05.719Z,1513238285.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:05.722Z,1513238285.722 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T07:58:05.723Z,1513238285.723 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T07:58:05.723Z,1513238285.723 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T07:58:05.804Z,1513238285.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:05.863Z,1513238285.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:09.355Z,1513238289.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:09.370Z,1513238289.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:09.469Z,1513238289.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:09.512Z,1513238289.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:09.833Z,1513238289.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:09.863Z,1513238289.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:10.241Z,1513238290.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:10.263Z,1513238290.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:10.636Z,1513238290.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:10.665Z,1513238290.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:11.020Z,1513238291.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:11.036Z,1513238291.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:11.424Z,1513238291.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:11.439Z,1513238291.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:11.821Z,1513238291.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:11.836Z,1513238291.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:12.237Z,1513238292.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:12.261Z,1513238292.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:12.633Z,1513238292.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:12.665Z,1513238292.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:13.038Z,1513238293.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:13.062Z,1513238293.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:13.420Z,1513238293.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:13.439Z,1513238293.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:13.820Z,1513238293.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:13.834Z,1513238293.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:14.222Z,1513238294.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:14.270Z,1513238294.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:14.623Z,1513238294.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:14.643Z,1513238294.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:15.033Z,1513238295.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:15.048Z,1513238295.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:15.438Z,1513238295.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:15.471Z,1513238295.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:15.826Z,1513238295.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:15.842Z,1513238295.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:16.224Z,1513238296.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:16.239Z,1513238296.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:16.626Z,1513238296.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:16.650Z,1513238296.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:17.030Z,1513238297.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:17.045Z,1513238297.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:17.431Z,1513238297.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:17.451Z,1513238297.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:17.829Z,1513238297.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:17.851Z,1513238297.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:18.225Z,1513238298.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:18.241Z,1513238298.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:18.628Z,1513238298.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:18.642Z,1513238298.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:19.034Z,1513238299.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:19.098Z,1513238299.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:19.434Z,1513238299.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:19.455Z,1513238299.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:19.834Z,1513238299.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:19.849Z,1513238299.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:20.215Z,1513238300.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:20.248Z,1513238300.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:20.615Z,1513238300.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:20.639Z,1513238300.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:21.015Z,1513238301.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:21.060Z,1513238301.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:21.425Z,1513238301.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:21.440Z,1513238301.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:21.821Z,1513238301.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:21.837Z,1513238301.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:22.242Z,1513238302.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:22.268Z,1513238302.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:22.635Z,1513238302.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:22.664Z,1513238302.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:23.084Z,1513238303.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:23.119Z,1513238303.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:23.424Z,1513238303.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:23.439Z,1513238303.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:23.823Z,1513238303.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:23.842Z,1513238303.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:24.226Z,1513238304.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:24.240Z,1513238304.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:24.626Z,1513238304.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:24.640Z,1513238304.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:25.038Z,1513238305.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:25.099Z,1513238305.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:25.435Z,1513238305.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:25.474Z,1513238305.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:25.829Z,1513238305.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:25.852Z,1513238305.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:26.243Z,1513238306.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:26.327Z,1513238306.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:26.624Z,1513238306.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:26.643Z,1513238306.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:27.029Z,1513238307.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:27.075Z,1513238307.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:27.424Z,1513238307.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:27.443Z,1513238307.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:27.826Z,1513238307.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:27.841Z,1513238307.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:28.229Z,1513238308.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:28.244Z,1513238308.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:28.630Z,1513238308.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:28.644Z,1513238308.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:29.034Z,1513238309.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:29.048Z,1513238309.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:29.457Z,1513238309.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:29.471Z,1513238309.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:29.855Z,1513238309.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:29.884Z,1513238309.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:30.226Z,1513238310.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:30.247Z,1513238310.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:30.637Z,1513238310.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:30.657Z,1513238310.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:31.034Z,1513238311.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:31.057Z,1513238311.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:31.442Z,1513238311.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:31.463Z,1513238311.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:31.843Z,1513238311.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:31.858Z,1513238311.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:32.213Z,1513238312.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:32.236Z,1513238312.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:32.628Z,1513238312.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:32.703Z,1513238312.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:33.015Z,1513238313.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:33.053Z,1513238313.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:33.417Z,1513238313.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:33.451Z,1513238313.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:33.815Z,1513238313.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:33.851Z,1513238313.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:34.243Z,1513238314.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:34.258Z,1513238314.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:34.626Z,1513238314.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:34.663Z,1513238314.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:35.026Z,1513238315.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:35.059Z,1513238315.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:35.060Z,1513238315.060 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149
2017-12-14T07:58:35.060Z,1513238315.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T07:58:35.062Z,1513238315.062 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:35.062Z,1513238315.062 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 149
2017-12-14T07:58:35.062Z,1513238315.062 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T07:58:35.064Z,1513238315.064 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:35.064Z,1513238315.064 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2017-12-14T07:58:35.064Z,1513238315.064 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T07:58:35.076Z,1513238315.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T07:58:35.076Z,1513238315.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T07:58:35.076Z,1513238315.076 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T07:58:35.415Z,1513238315.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:35.473Z,1513238315.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T07:58:35.474Z,1513238315.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149
2017-12-14T07:58:35.474Z,1513238315.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T07:58:35.474Z,1513238315.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 149
2017-12-14T07:58:35.474Z,1513238315.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T07:58:35.475Z,1513238315.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2017-12-14T07:58:35.848Z,1513238315.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:35.871Z,1513238315.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T07:58:35.871Z,1513238315.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:58:35.871Z,1513238315.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:58:35.872Z,1513238315.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T07:58:35.872Z,1513238315.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:58:35.877Z,1513238315.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:58:35.877Z,1513238315.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T07:58:35.878Z,1513238315.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T07:58:35.878Z,1513238315.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T07:58:36.243Z,1513238316.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:36.267Z,1513238316.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:36.623Z,1513238316.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:36.638Z,1513238316.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:37.038Z,1513238317.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:37.065Z,1513238317.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:37.437Z,1513238317.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:37.470Z,1513238317.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:37.834Z,1513238317.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:37.866Z,1513238317.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:38.218Z,1513238318.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:38.238Z,1513238318.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:38.622Z,1513238318.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:38.642Z,1513238318.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:39.024Z,1513238319.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:39.039Z,1513238319.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:39.425Z,1513238319.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:39.439Z,1513238319.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:39.824Z,1513238319.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:39.843Z,1513238319.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:40.238Z,1513238320.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:40.259Z,1513238320.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:40.638Z,1513238320.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:40.659Z,1513238320.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:41.035Z,1513238321.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:41.051Z,1513238321.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:41.442Z,1513238321.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:41.480Z,1513238321.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:41.827Z,1513238321.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:41.847Z,1513238321.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:42.234Z,1513238322.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:42.282Z,1513238322.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:42.628Z,1513238322.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:42.655Z,1513238322.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:43.030Z,1513238323.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:43.059Z,1513238323.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:43.445Z,1513238323.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:43.467Z,1513238323.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:43.830Z,1513238323.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:43.863Z,1513238323.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:44.221Z,1513238324.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:44.236Z,1513238324.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:44.635Z,1513238324.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:44.663Z,1513238324.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:45.032Z,1513238325.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:45.059Z,1513238325.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:45.421Z,1513238325.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:45.436Z,1513238325.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:45.824Z,1513238325.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:45.843Z,1513238325.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:46.230Z,1513238326.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:46.290Z,1513238326.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:46.637Z,1513238326.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:46.652Z,1513238326.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:47.034Z,1513238327.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:47.049Z,1513238327.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:47.430Z,1513238327.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:47.501Z,1513238327.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:47.827Z,1513238327.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:47.842Z,1513238327.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:48.227Z,1513238328.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:48.241Z,1513238328.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:48.638Z,1513238328.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:48.692Z,1513238328.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:49.034Z,1513238329.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:49.050Z,1513238329.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:49.438Z,1513238329.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:49.487Z,1513238329.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:49.832Z,1513238329.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:49.867Z,1513238329.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:50.214Z,1513238330.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:50.228Z,1513238330.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:50.616Z,1513238330.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:50.658Z,1513238330.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:51.015Z,1513238331.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:51.032Z,1513238331.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:51.422Z,1513238331.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:51.436Z,1513238331.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:51.823Z,1513238331.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:51.837Z,1513238331.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:52.233Z,1513238332.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:52.258Z,1513238332.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:52.633Z,1513238332.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:52.667Z,1513238332.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:53.034Z,1513238333.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:53.059Z,1513238333.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:53.421Z,1513238333.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:53.436Z,1513238333.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:53.822Z,1513238333.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:53.837Z,1513238333.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:54.220Z,1513238334.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:54.249Z,1513238334.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:54.623Z,1513238334.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:54.638Z,1513238334.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:55.059Z,1513238335.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:55.090Z,1513238335.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:55.430Z,1513238335.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:55.467Z,1513238335.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:55.838Z,1513238335.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:55.869Z,1513238335.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:56.225Z,1513238336.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:56.247Z,1513238336.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:56.624Z,1513238336.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:56.643Z,1513238336.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:57.026Z,1513238337.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:57.041Z,1513238337.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:57.426Z,1513238337.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:57.441Z,1513238337.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:57.824Z,1513238337.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:57.869Z,1513238337.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:58.243Z,1513238338.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:58.271Z,1513238338.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:58.635Z,1513238338.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:58.655Z,1513238338.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:59.034Z,1513238339.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:59.055Z,1513238339.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:59.431Z,1513238339.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:59.451Z,1513238339.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:58:59.823Z,1513238339.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:58:59.843Z,1513238339.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:00.231Z,1513238340.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:00.245Z,1513238340.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:00.625Z,1513238340.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:00.641Z,1513238340.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:01.042Z,1513238341.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:01.058Z,1513238341.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:01.443Z,1513238341.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:01.463Z,1513238341.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:01.839Z,1513238341.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:01.859Z,1513238341.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:02.217Z,1513238342.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:02.247Z,1513238342.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:02.615Z,1513238342.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:02.652Z,1513238342.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:03.043Z,1513238343.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:03.059Z,1513238343.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:03.416Z,1513238343.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:03.491Z,1513238343.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:03.815Z,1513238343.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:03.846Z,1513238343.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:04.234Z,1513238344.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:04.254Z,1513238344.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:04.645Z,1513238344.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:04.659Z,1513238344.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:05.027Z,1513238345.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:05.056Z,1513238345.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:05.415Z,1513238345.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:05.446Z,1513238345.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:05.815Z,1513238345.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:05.859Z,1513238345.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:06.220Z,1513238346.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:06.257Z,1513238346.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:09.724Z,1513238349.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:09.780Z,1513238349.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:09.891Z,1513238349.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:09.934Z,1513238349.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:10.265Z,1513238350.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:10.287Z,1513238350.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:10.325Z,1513238350.325 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T07:59:10.677Z,1513238350.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:10.731Z,1513238350.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:11.077Z,1513238351.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:11.124Z,1513238351.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:11.455Z,1513238351.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:11.514Z,1513238351.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:11.860Z,1513238351.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:11.874Z,1513238351.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:12.259Z,1513238352.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:12.287Z,1513238352.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:12.669Z,1513238352.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:12.691Z,1513238352.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:13.069Z,1513238353.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:13.085Z,1513238353.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:13.455Z,1513238353.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:13.475Z,1513238353.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:13.857Z,1513238353.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:13.871Z,1513238353.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:14.304Z,1513238354.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:14.330Z,1513238354.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:14.647Z,1513238354.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:14.672Z,1513238354.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:15.075Z,1513238355.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:15.095Z,1513238355.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:15.474Z,1513238355.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:15.488Z,1513238355.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:15.870Z,1513238355.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:15.885Z,1513238355.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:16.230Z,1513238356.230 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T07:59:16.230Z,1513238356.230 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T07:59:16.230Z,1513238356.230 [DropWeight](ERROR): Hardware Fault
2017-12-14T07:59:16.247Z,1513238356.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:16.300Z,1513238356.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:16.319Z,1513238356.319 [CBIT](INFO): Critical error at 20171214T075916
2017-12-14T07:59:16.321Z,1513238356.321 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T07:59:16.322Z,1513238356.322 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T07:59:16.647Z,1513238356.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:16.682Z,1513238356.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:16.694Z,1513238356.694 [CBIT](INFO): Critical error at 20171214T075916
2017-12-14T07:59:17.047Z,1513238357.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:17.082Z,1513238357.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:17.471Z,1513238357.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:17.500Z,1513238357.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:17.861Z,1513238357.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:17.883Z,1513238357.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:18.259Z,1513238358.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:18.279Z,1513238358.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:18.657Z,1513238358.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:18.687Z,1513238358.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:19.062Z,1513238359.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:19.094Z,1513238359.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:19.453Z,1513238359.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:19.475Z,1513238359.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:19.854Z,1513238359.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:19.900Z,1513238359.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:20.252Z,1513238360.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:20.266Z,1513238360.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:20.678Z,1513238360.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:20.711Z,1513238360.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:21.065Z,1513238361.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:21.080Z,1513238361.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:21.469Z,1513238361.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:21.491Z,1513238361.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:21.870Z,1513238361.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:21.884Z,1513238361.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:22.262Z,1513238362.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:22.276Z,1513238362.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:22.647Z,1513238362.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:22.679Z,1513238362.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:23.047Z,1513238363.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:23.084Z,1513238363.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:23.458Z,1513238363.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:23.473Z,1513238363.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:23.875Z,1513238363.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:23.926Z,1513238363.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:24.267Z,1513238364.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:24.281Z,1513238364.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:24.673Z,1513238364.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:24.687Z,1513238364.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:25.061Z,1513238365.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:25.088Z,1513238365.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:25.451Z,1513238365.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:25.483Z,1513238365.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:25.846Z,1513238365.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:25.870Z,1513238365.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:26.252Z,1513238366.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:26.277Z,1513238366.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:26.647Z,1513238366.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:26.679Z,1513238366.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:27.072Z,1513238367.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:27.095Z,1513238367.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:27.462Z,1513238367.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:27.489Z,1513238367.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:27.858Z,1513238367.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:27.895Z,1513238367.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:28.248Z,1513238368.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:28.262Z,1513238368.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:28.651Z,1513238368.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:28.691Z,1513238368.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:29.053Z,1513238369.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:29.068Z,1513238369.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:29.455Z,1513238369.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:29.470Z,1513238369.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:29.853Z,1513238369.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:29.868Z,1513238369.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:30.272Z,1513238370.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:30.306Z,1513238370.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:30.669Z,1513238370.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:30.700Z,1513238370.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:31.070Z,1513238371.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:31.100Z,1513238371.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:31.453Z,1513238371.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:31.468Z,1513238371.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:31.852Z,1513238371.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:31.930Z,1513238371.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:32.248Z,1513238372.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:32.319Z,1513238372.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:32.647Z,1513238372.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:32.678Z,1513238372.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:33.062Z,1513238373.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:33.085Z,1513238373.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:33.484Z,1513238373.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:33.535Z,1513238373.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:33.870Z,1513238373.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:33.899Z,1513238373.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:34.252Z,1513238374.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:34.299Z,1513238374.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:34.653Z,1513238374.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:34.667Z,1513238374.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:35.054Z,1513238375.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:35.069Z,1513238375.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:35.454Z,1513238375.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:35.468Z,1513238375.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:35.854Z,1513238375.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:35.868Z,1513238375.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:36.266Z,1513238376.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:36.296Z,1513238376.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:36.719Z,1513238376.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:36.759Z,1513238376.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:37.071Z,1513238377.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:37.095Z,1513238377.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:37.453Z,1513238377.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:37.468Z,1513238377.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:37.860Z,1513238377.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:37.874Z,1513238377.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:38.247Z,1513238378.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:38.284Z,1513238378.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:38.647Z,1513238378.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:38.680Z,1513238378.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:39.082Z,1513238379.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:39.097Z,1513238379.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:39.470Z,1513238379.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:39.491Z,1513238379.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:39.882Z,1513238379.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:39.930Z,1513238379.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:40.246Z,1513238380.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:40.282Z,1513238380.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:40.646Z,1513238380.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:40.680Z,1513238380.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:41.069Z,1513238381.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:41.084Z,1513238381.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:41.448Z,1513238381.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:41.484Z,1513238381.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:41.851Z,1513238381.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:41.893Z,1513238381.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:42.259Z,1513238382.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:42.284Z,1513238382.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:42.662Z,1513238382.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:42.724Z,1513238382.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:43.079Z,1513238383.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:43.132Z,1513238383.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:43.453Z,1513238383.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:43.482Z,1513238383.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:43.848Z,1513238383.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:43.862Z,1513238383.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:44.255Z,1513238384.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:44.270Z,1513238384.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:44.650Z,1513238384.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:44.665Z,1513238384.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:45.070Z,1513238385.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:45.100Z,1513238385.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:45.473Z,1513238385.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:45.498Z,1513238385.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:45.865Z,1513238385.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:45.897Z,1513238385.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:46.252Z,1513238386.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:46.347Z,1513238386.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:46.654Z,1513238386.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:46.668Z,1513238386.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:47.051Z,1513238387.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:47.071Z,1513238387.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:47.455Z,1513238387.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:47.475Z,1513238387.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:47.856Z,1513238387.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:47.872Z,1513238387.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:48.270Z,1513238388.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:48.301Z,1513238388.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:48.661Z,1513238388.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:48.679Z,1513238388.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:49.058Z,1513238389.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:49.073Z,1513238389.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:49.482Z,1513238389.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:49.514Z,1513238389.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:49.846Z,1513238389.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:49.872Z,1513238389.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:50.252Z,1513238390.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:50.279Z,1513238390.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:50.646Z,1513238390.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:50.683Z,1513238390.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:51.057Z,1513238391.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:51.094Z,1513238391.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:51.474Z,1513238391.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:51.495Z,1513238391.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:51.858Z,1513238391.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:51.891Z,1513238391.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:52.246Z,1513238392.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:52.281Z,1513238392.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:52.658Z,1513238392.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:52.726Z,1513238392.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:53.047Z,1513238393.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:53.083Z,1513238393.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:53.455Z,1513238393.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:53.483Z,1513238393.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:53.847Z,1513238393.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:53.882Z,1513238393.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:54.258Z,1513238394.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:54.288Z,1513238394.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:54.669Z,1513238394.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:54.762Z,1513238394.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:55.066Z,1513238395.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:55.085Z,1513238395.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:55.451Z,1513238395.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:55.507Z,1513238395.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:55.866Z,1513238395.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:55.941Z,1513238395.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:56.247Z,1513238396.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:56.303Z,1513238396.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:56.651Z,1513238396.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:56.687Z,1513238396.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:57.065Z,1513238397.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:57.089Z,1513238397.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:57.481Z,1513238397.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:57.495Z,1513238397.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:57.866Z,1513238397.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:57.891Z,1513238397.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:58.252Z,1513238398.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:58.272Z,1513238398.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:58.647Z,1513238398.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:58.663Z,1513238398.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:59.060Z,1513238399.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:59.096Z,1513238399.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:59.457Z,1513238399.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:59.472Z,1513238399.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T07:59:59.858Z,1513238399.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T07:59:59.873Z,1513238399.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:00.270Z,1513238400.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:00.300Z,1513238400.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:00.674Z,1513238400.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:00.698Z,1513238400.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:01.065Z,1513238401.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:01.080Z,1513238401.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:01.453Z,1513238401.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:01.468Z,1513238401.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:01.853Z,1513238401.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:01.867Z,1513238401.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:02.314Z,1513238402.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:02.349Z,1513238402.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:02.656Z,1513238402.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:02.671Z,1513238402.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:03.061Z,1513238403.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:03.076Z,1513238403.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:03.461Z,1513238403.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:03.475Z,1513238403.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:03.862Z,1513238403.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:03.876Z,1513238403.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:04.255Z,1513238404.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:04.275Z,1513238404.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:04.655Z,1513238404.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:04.701Z,1513238404.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:05.050Z,1513238405.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:05.083Z,1513238405.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:05.465Z,1513238405.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:05.509Z,1513238405.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:05.856Z,1513238405.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:05.875Z,1513238405.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:06.266Z,1513238406.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:06.281Z,1513238406.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:09.676Z,1513238409.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:09.691Z,1513238409.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:09.808Z,1513238409.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:09.854Z,1513238409.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:10.168Z,1513238410.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:10.184Z,1513238410.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:10.571Z,1513238410.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:10.585Z,1513238410.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:10.989Z,1513238410.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:11.016Z,1513238411.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:11.381Z,1513238411.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:11.412Z,1513238411.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:11.782Z,1513238411.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:11.813Z,1513238411.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:12.171Z,1513238412.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:12.187Z,1513238412.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:12.570Z,1513238412.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:12.599Z,1513238412.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:12.983Z,1513238412.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:12.998Z,1513238412.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:13.382Z,1513238413.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:13.397Z,1513238413.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:13.781Z,1513238413.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:13.803Z,1513238413.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:14.186Z,1513238414.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:14.207Z,1513238414.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:14.576Z,1513238414.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:14.607Z,1513238414.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:14.975Z,1513238414.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:15.031Z,1513238415.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:15.386Z,1513238415.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:15.402Z,1513238415.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:15.776Z,1513238415.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:15.791Z,1513238415.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:16.182Z,1513238416.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:16.203Z,1513238416.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:16.597Z,1513238416.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:16.659Z,1513238416.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:16.982Z,1513238416.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:16.997Z,1513238416.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:17.376Z,1513238417.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:17.440Z,1513238417.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:17.767Z,1513238417.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:17.795Z,1513238417.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:18.190Z,1513238418.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:18.259Z,1513238418.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:18.585Z,1513238418.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:18.611Z,1513238418.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:18.981Z,1513238418.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:19.036Z,1513238419.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:19.382Z,1513238419.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:19.397Z,1513238419.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:19.786Z,1513238419.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:19.801Z,1513238419.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:20.164Z,1513238420.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:20.195Z,1513238420.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:20.569Z,1513238420.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:20.605Z,1513238420.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:20.981Z,1513238420.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:21.002Z,1513238421.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:21.395Z,1513238421.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:21.443Z,1513238421.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:21.783Z,1513238421.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:21.797Z,1513238421.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:22.171Z,1513238422.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:22.202Z,1513238422.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:22.616Z,1513238422.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:22.647Z,1513238422.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:22.983Z,1513238422.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:23.007Z,1513238423.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:23.397Z,1513238423.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:23.411Z,1513238423.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:23.781Z,1513238423.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:23.808Z,1513238423.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:24.159Z,1513238424.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:24.191Z,1513238424.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:24.589Z,1513238424.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:24.620Z,1513238424.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:24.972Z,1513238424.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:24.991Z,1513238424.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:25.385Z,1513238425.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:25.407Z,1513238425.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:25.784Z,1513238425.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:25.799Z,1513238425.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:26.182Z,1513238426.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:26.196Z,1513238426.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:26.560Z,1513238426.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:26.587Z,1513238426.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:26.970Z,1513238426.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:26.997Z,1513238426.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:27.374Z,1513238427.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:27.412Z,1513238427.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:27.774Z,1513238427.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:27.821Z,1513238427.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:28.174Z,1513238428.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:28.204Z,1513238428.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:28.594Z,1513238428.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:28.610Z,1513238428.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:28.978Z,1513238428.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:29.005Z,1513238429.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:29.365Z,1513238429.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:29.403Z,1513238429.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:29.771Z,1513238429.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:29.786Z,1513238429.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:30.159Z,1513238430.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:30.180Z,1513238430.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:30.573Z,1513238430.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:30.616Z,1513238430.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:31.017Z,1513238431.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:31.040Z,1513238431.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:31.374Z,1513238431.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:31.389Z,1513238431.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:31.789Z,1513238431.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:31.816Z,1513238431.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:32.183Z,1513238432.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:32.217Z,1513238432.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:32.575Z,1513238432.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:32.619Z,1513238432.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:32.966Z,1513238432.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:32.989Z,1513238432.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:33.373Z,1513238433.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:33.387Z,1513238433.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:33.767Z,1513238433.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:33.786Z,1513238433.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:34.210Z,1513238434.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:34.238Z,1513238434.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:34.593Z,1513238434.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:34.628Z,1513238434.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:34.976Z,1513238434.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:35.003Z,1513238435.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:35.375Z,1513238435.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:35.390Z,1513238435.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:35.777Z,1513238435.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:35.792Z,1513238435.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:36.178Z,1513238436.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:36.193Z,1513238436.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:36.621Z,1513238436.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:36.652Z,1513238436.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:36.981Z,1513238436.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:36.996Z,1513238436.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:37.415Z,1513238437.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:37.439Z,1513238437.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:37.782Z,1513238437.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:37.797Z,1513238437.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:38.174Z,1513238438.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:38.194Z,1513238438.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:38.563Z,1513238438.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:38.589Z,1513238438.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:38.973Z,1513238438.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:39.031Z,1513238439.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:39.385Z,1513238439.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:39.432Z,1513238439.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:39.770Z,1513238439.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:39.784Z,1513238439.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:40.170Z,1513238440.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:40.218Z,1513238440.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:40.583Z,1513238440.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:40.627Z,1513238440.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:40.986Z,1513238440.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:41.031Z,1513238441.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:41.386Z,1513238441.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:41.416Z,1513238441.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:41.777Z,1513238441.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:41.816Z,1513238441.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:42.170Z,1513238442.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:42.185Z,1513238442.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:42.579Z,1513238442.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:42.617Z,1513238442.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:42.981Z,1513238442.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:42.996Z,1513238442.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:43.385Z,1513238443.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:43.426Z,1513238443.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:43.804Z,1513238443.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:43.836Z,1513238443.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:44.172Z,1513238444.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:44.186Z,1513238444.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:44.580Z,1513238444.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:44.607Z,1513238444.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:44.980Z,1513238444.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:44.995Z,1513238444.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:45.379Z,1513238445.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:45.401Z,1513238445.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:45.789Z,1513238445.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:45.812Z,1513238445.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:46.187Z,1513238446.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:46.202Z,1513238446.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:46.609Z,1513238446.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:46.659Z,1513238446.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:46.982Z,1513238446.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:47.006Z,1513238447.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:47.365Z,1513238447.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:47.408Z,1513238447.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:47.765Z,1513238447.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:47.822Z,1513238447.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:48.176Z,1513238448.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:48.224Z,1513238448.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:48.600Z,1513238448.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:48.652Z,1513238448.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:48.978Z,1513238448.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:49.020Z,1513238449.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:49.371Z,1513238449.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:49.455Z,1513238449.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:49.777Z,1513238449.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:49.827Z,1513238449.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:50.191Z,1513238450.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:50.246Z,1513238450.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:50.623Z,1513238450.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:50.670Z,1513238450.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:51.004Z,1513238451.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:51.048Z,1513238451.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:51.396Z,1513238451.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:51.468Z,1513238451.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:51.786Z,1513238451.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:51.819Z,1513238451.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:52.169Z,1513238452.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:52.228Z,1513238452.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:52.568Z,1513238452.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:52.615Z,1513238452.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:52.994Z,1513238452.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:53.047Z,1513238453.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:53.411Z,1513238453.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:53.425Z,1513238453.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:53.778Z,1513238453.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:53.792Z,1513238453.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:54.172Z,1513238454.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:54.187Z,1513238454.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:54.571Z,1513238454.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:54.591Z,1513238454.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:54.990Z,1513238454.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:55.038Z,1513238455.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:55.382Z,1513238455.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:55.397Z,1513238455.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:55.785Z,1513238455.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:55.803Z,1513238455.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:56.176Z,1513238456.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:56.191Z,1513238456.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:56.596Z,1513238456.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:56.664Z,1513238456.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:56.994Z,1513238456.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:57.015Z,1513238457.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:57.406Z,1513238457.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:57.438Z,1513238457.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:57.797Z,1513238457.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:57.819Z,1513238457.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:58.194Z,1513238458.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:58.210Z,1513238458.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:58.587Z,1513238458.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:58.638Z,1513238458.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:58.976Z,1513238458.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:58.992Z,1513238458.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:59.382Z,1513238459.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:59.405Z,1513238459.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:00:59.788Z,1513238459.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:00:59.803Z,1513238459.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:00.165Z,1513238460.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:00.206Z,1513238460.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:00.583Z,1513238460.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:00.630Z,1513238460.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:00.984Z,1513238460.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:01.015Z,1513238461.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:01.384Z,1513238461.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:01.506Z,1513238461.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:01.784Z,1513238461.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:01.811Z,1513238461.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:02.176Z,1513238462.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:02.243Z,1513238462.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:02.578Z,1513238462.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:02.651Z,1513238462.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:02.962Z,1513238462.962 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:01:02.962Z,1513238462.962 [NAL9602] Data Fault, FailCount= 1
2017-12-14T08:01:02.963Z,1513238462.963 [NAL9602](ERROR): Data Fault
2017-12-14T08:01:02.994Z,1513238462.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:03.054Z,1513238463.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:03.117Z,1513238463.117 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:01:03.346Z,1513238463.346 [NAL9602](INFO): Powering down
2017-12-14T08:01:03.379Z,1513238463.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:03.454Z,1513238463.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:03.764Z,1513238463.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:03.839Z,1513238463.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:04.160Z,1513238464.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:04.235Z,1513238464.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:04.268Z,1513238464.268 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:01:04.268Z,1513238464.268 [NAL9602] No Fault, FailCount= 1
2017-12-14T08:01:04.636Z,1513238464.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:04.698Z,1513238464.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:04.964Z,1513238464.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:05.004Z,1513238465.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:05.379Z,1513238465.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:05.433Z,1513238465.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:05.768Z,1513238465.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:05.813Z,1513238465.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:06.164Z,1513238466.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:06.211Z,1513238466.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:06.568Z,1513238466.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:06.614Z,1513238466.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:13.305Z,1513238473.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:13.352Z,1513238473.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:13.489Z,1513238473.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:13.549Z,1513238473.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:13.848Z,1513238473.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:13.863Z,1513238473.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:14.247Z,1513238474.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:14.267Z,1513238474.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:14.652Z,1513238474.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:14.667Z,1513238474.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:15.048Z,1513238475.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:15.064Z,1513238475.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:15.448Z,1513238475.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:15.463Z,1513238475.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:15.858Z,1513238475.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:15.872Z,1513238475.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:16.250Z,1513238476.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:16.264Z,1513238476.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:16.652Z,1513238476.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:16.691Z,1513238476.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:17.045Z,1513238477.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:17.068Z,1513238477.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:17.454Z,1513238477.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:17.469Z,1513238477.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:17.849Z,1513238477.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:17.864Z,1513238477.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:18.240Z,1513238478.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:18.263Z,1513238478.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:18.642Z,1513238478.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:18.667Z,1513238478.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:19.055Z,1513238479.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:19.071Z,1513238479.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:19.443Z,1513238479.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:19.469Z,1513238479.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:19.844Z,1513238479.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:19.900Z,1513238479.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:20.281Z,1513238480.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:20.296Z,1513238480.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:20.646Z,1513238480.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:20.672Z,1513238480.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:21.041Z,1513238481.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:21.073Z,1513238481.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:21.443Z,1513238481.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:21.470Z,1513238481.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:21.843Z,1513238481.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:21.874Z,1513238481.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:22.242Z,1513238482.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:22.277Z,1513238482.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:22.644Z,1513238482.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:22.674Z,1513238482.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:23.082Z,1513238483.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:23.146Z,1513238483.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:23.442Z,1513238483.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:23.478Z,1513238483.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:23.848Z,1513238483.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:23.874Z,1513238483.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:24.243Z,1513238484.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:24.266Z,1513238484.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:24.673Z,1513238484.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:24.687Z,1513238484.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:25.043Z,1513238485.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:25.076Z,1513238485.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:25.442Z,1513238485.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:25.511Z,1513238485.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:25.851Z,1513238485.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:25.866Z,1513238485.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:26.293Z,1513238486.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:26.355Z,1513238486.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:26.652Z,1513238486.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:26.672Z,1513238486.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:27.046Z,1513238487.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:27.095Z,1513238487.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:27.454Z,1513238487.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:27.468Z,1513238487.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:27.854Z,1513238487.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:27.868Z,1513238487.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:28.252Z,1513238488.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:28.266Z,1513238488.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:28.652Z,1513238488.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:28.666Z,1513238488.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:29.050Z,1513238489.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:29.066Z,1513238489.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:29.484Z,1513238489.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:29.534Z,1513238489.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:29.836Z,1513238489.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:29.869Z,1513238489.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:30.255Z,1513238490.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:30.270Z,1513238490.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:30.651Z,1513238490.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:30.665Z,1513238490.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:31.060Z,1513238491.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:31.074Z,1513238491.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:31.448Z,1513238491.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:31.463Z,1513238491.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:31.850Z,1513238491.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:31.864Z,1513238491.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:32.250Z,1513238492.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:32.264Z,1513238492.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:32.679Z,1513238492.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:32.715Z,1513238492.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:33.044Z,1513238493.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:33.095Z,1513238493.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:33.427Z,1513238493.427 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:01:33.459Z,1513238493.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:33.506Z,1513238493.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:33.851Z,1513238493.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:33.870Z,1513238493.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:34.247Z,1513238494.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:34.262Z,1513238494.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:34.651Z,1513238494.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:34.666Z,1513238494.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:35.056Z,1513238495.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:35.075Z,1513238495.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:35.456Z,1513238495.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:35.512Z,1513238495.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:35.854Z,1513238495.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:35.869Z,1513238495.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:36.058Z,1513238496.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:36.261Z,1513238496.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:36.276Z,1513238496.276 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:36.276Z,1513238496.276 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150
2017-12-14T08:01:36.276Z,1513238496.276 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:01:36.278Z,1513238496.278 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:36.279Z,1513238496.279 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 150
2017-12-14T08:01:36.279Z,1513238496.279 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:01:36.281Z,1513238496.281 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:36.281Z,1513238496.281 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2017-12-14T08:01:36.281Z,1513238496.281 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:01:36.313Z,1513238496.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:01:36.313Z,1513238496.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:01:36.313Z,1513238496.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:01:36.643Z,1513238496.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:36.688Z,1513238496.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:01:36.688Z,1513238496.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150
2017-12-14T08:01:36.688Z,1513238496.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:01:36.688Z,1513238496.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 150
2017-12-14T08:01:36.689Z,1513238496.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:01:36.689Z,1513238496.689 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2017-12-14T08:01:36.855Z,1513238496.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:37.042Z,1513238497.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:37.068Z,1513238497.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:01:37.068Z,1513238497.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:01:37.068Z,1513238497.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:01:37.069Z,1513238497.069 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:01:37.069Z,1513238497.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:01:37.069Z,1513238497.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:01:37.070Z,1513238497.070 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:01:37.070Z,1513238497.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:01:37.070Z,1513238497.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:01:37.261Z,1513238497.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:37.439Z,1513238497.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:37.471Z,1513238497.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:37.844Z,1513238497.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:37.876Z,1513238497.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:38.057Z,1513238498.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:38.239Z,1513238498.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:38.272Z,1513238498.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:38.642Z,1513238498.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:38.684Z,1513238498.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:38.853Z,1513238498.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:39.093Z,1513238499.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:39.161Z,1513238499.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:39.257Z,1513238499.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:39.450Z,1513238499.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:39.465Z,1513238499.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:39.851Z,1513238499.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:39.866Z,1513238499.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:40.252Z,1513238500.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:40.267Z,1513238500.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:40.650Z,1513238500.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:40.665Z,1513238500.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:41.058Z,1513238501.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:41.144Z,1513238501.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:41.449Z,1513238501.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:41.463Z,1513238501.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:41.848Z,1513238501.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:41.862Z,1513238501.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:42.289Z,1513238502.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:42.316Z,1513238502.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:42.652Z,1513238502.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:42.671Z,1513238502.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:43.071Z,1513238503.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:43.107Z,1513238503.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:43.450Z,1513238503.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:43.465Z,1513238503.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:43.850Z,1513238503.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:43.865Z,1513238503.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:44.261Z,1513238504.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:44.283Z,1513238504.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:44.626Z,1513238504.626 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:01:44.655Z,1513238504.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:44.671Z,1513238504.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:45.047Z,1513238505.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:45.066Z,1513238505.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:45.469Z,1513238505.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:45.512Z,1513238505.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:45.864Z,1513238505.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:45.880Z,1513238505.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:46.260Z,1513238506.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:46.283Z,1513238506.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:46.652Z,1513238506.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:46.666Z,1513238506.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:47.064Z,1513238507.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:47.079Z,1513238507.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:47.447Z,1513238507.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:47.511Z,1513238507.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:47.862Z,1513238507.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:47.896Z,1513238507.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:48.265Z,1513238508.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:48.281Z,1513238508.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:48.667Z,1513238508.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:48.716Z,1513238508.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:49.043Z,1513238509.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:49.095Z,1513238509.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:49.444Z,1513238509.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:49.475Z,1513238509.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:49.865Z,1513238509.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:49.922Z,1513238509.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:50.065Z,1513238510.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:50.240Z,1513238510.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:50.263Z,1513238510.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:50.653Z,1513238510.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:50.684Z,1513238510.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:50.863Z,1513238510.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:51.065Z,1513238511.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:51.080Z,1513238511.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:51.273Z,1513238511.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:51.453Z,1513238511.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:51.479Z,1513238511.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:51.847Z,1513238511.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:51.882Z,1513238511.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:52.300Z,1513238512.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:52.420Z,1513238512.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:52.643Z,1513238512.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:52.658Z,1513238512.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:53.058Z,1513238513.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:53.085Z,1513238513.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:53.461Z,1513238513.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:53.483Z,1513238513.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:53.860Z,1513238513.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:53.883Z,1513238513.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:54.248Z,1513238514.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:54.263Z,1513238514.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:54.649Z,1513238514.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:54.663Z,1513238514.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:55.079Z,1513238515.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:55.118Z,1513238515.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:55.460Z,1513238515.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:55.475Z,1513238515.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:55.858Z,1513238515.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:55.872Z,1513238515.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:56.257Z,1513238516.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:56.271Z,1513238516.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:56.674Z,1513238516.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:56.704Z,1513238516.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:57.046Z,1513238517.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:57.068Z,1513238517.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:57.450Z,1513238517.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:57.464Z,1513238517.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:57.855Z,1513238517.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:57.875Z,1513238517.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:58.265Z,1513238518.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:58.342Z,1513238518.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:58.643Z,1513238518.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:58.673Z,1513238518.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:59.055Z,1513238519.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:59.081Z,1513238519.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:59.475Z,1513238519.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:59.490Z,1513238519.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:01:59.853Z,1513238519.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:01:59.884Z,1513238519.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:00.243Z,1513238520.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:00.279Z,1513238520.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:00.655Z,1513238520.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:00.684Z,1513238520.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:01.056Z,1513238521.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:01.086Z,1513238521.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:01.454Z,1513238521.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:01.478Z,1513238521.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:01.869Z,1513238521.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:01.887Z,1513238521.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:02.268Z,1513238522.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:02.283Z,1513238522.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:02.654Z,1513238522.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:02.687Z,1513238522.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:03.063Z,1513238523.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:03.083Z,1513238523.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:03.457Z,1513238523.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:03.472Z,1513238523.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:03.840Z,1513238523.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:03.863Z,1513238523.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:04.054Z,1513238524.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:04.243Z,1513238524.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:04.283Z,1513238524.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:04.685Z,1513238524.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:04.705Z,1513238524.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:04.858Z,1513238524.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:05.087Z,1513238525.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:05.115Z,1513238525.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:05.282Z,1513238525.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:05.466Z,1513238525.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:05.481Z,1513238525.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:05.861Z,1513238525.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:05.877Z,1513238525.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:06.078Z,1513238526.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:06.243Z,1513238526.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:06.268Z,1513238526.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:06.643Z,1513238526.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:06.670Z,1513238526.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:06.873Z,1513238526.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:07.277Z,1513238527.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:10.135Z,1513238530.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:10.210Z,1513238530.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:10.316Z,1513238530.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:10.387Z,1513238530.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:10.675Z,1513238530.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:10.696Z,1513238530.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:11.081Z,1513238531.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:11.096Z,1513238531.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:11.479Z,1513238531.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:11.536Z,1513238531.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:11.876Z,1513238531.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:11.890Z,1513238531.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:12.256Z,1513238532.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:12.307Z,1513238532.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:12.678Z,1513238532.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:12.693Z,1513238532.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:13.081Z,1513238533.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:13.103Z,1513238533.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:13.482Z,1513238533.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:13.496Z,1513238533.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:13.859Z,1513238533.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:13.887Z,1513238533.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:14.259Z,1513238534.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:14.340Z,1513238534.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:14.670Z,1513238534.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:14.697Z,1513238534.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:15.088Z,1513238535.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:15.103Z,1513238535.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:15.481Z,1513238535.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:15.498Z,1513238535.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:15.859Z,1513238535.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:15.873Z,1513238535.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:16.260Z,1513238536.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:16.275Z,1513238536.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:16.671Z,1513238536.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:16.706Z,1513238536.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:17.077Z,1513238537.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:17.108Z,1513238537.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:17.516Z,1513238537.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:17.562Z,1513238537.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:17.882Z,1513238537.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:17.915Z,1513238537.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:18.061Z,1513238538.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:18.265Z,1513238538.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:18.280Z,1513238538.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:18.664Z,1513238538.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:18.684Z,1513238538.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:18.859Z,1513238538.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:19.075Z,1513238539.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:19.095Z,1513238539.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:19.269Z,1513238539.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:19.469Z,1513238539.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:19.484Z,1513238539.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:19.874Z,1513238539.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:19.891Z,1513238539.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:20.066Z,1513238540.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:20.277Z,1513238540.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:20.292Z,1513238540.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:20.677Z,1513238540.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:20.739Z,1513238540.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:20.862Z,1513238540.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:21.060Z,1513238541.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:21.087Z,1513238541.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:21.268Z,1513238541.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:21.463Z,1513238541.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:21.490Z,1513238541.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:21.859Z,1513238541.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:21.896Z,1513238541.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:22.263Z,1513238542.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:22.296Z,1513238542.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:22.702Z,1513238542.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:22.738Z,1513238542.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:23.082Z,1513238543.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:23.103Z,1513238543.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:23.482Z,1513238543.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:23.498Z,1513238543.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:23.884Z,1513238543.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:23.911Z,1513238543.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:24.258Z,1513238544.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:24.274Z,1513238544.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:24.692Z,1513238544.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:24.708Z,1513238544.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:25.089Z,1513238545.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:25.104Z,1513238545.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:25.469Z,1513238545.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:25.500Z,1513238545.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:25.863Z,1513238545.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:25.878Z,1513238545.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:26.267Z,1513238546.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:26.282Z,1513238546.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:26.678Z,1513238546.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:26.702Z,1513238546.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:27.107Z,1513238547.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:27.156Z,1513238547.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:27.481Z,1513238547.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:27.506Z,1513238547.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:27.864Z,1513238547.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:27.887Z,1513238547.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:28.269Z,1513238548.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:28.291Z,1513238548.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:28.678Z,1513238548.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:28.699Z,1513238548.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:29.078Z,1513238549.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:29.099Z,1513238549.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:29.476Z,1513238549.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:29.492Z,1513238549.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:29.863Z,1513238549.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:29.885Z,1513238549.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:30.285Z,1513238550.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:30.340Z,1513238550.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:30.682Z,1513238550.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:30.697Z,1513238550.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:31.082Z,1513238551.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:31.097Z,1513238551.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:31.482Z,1513238551.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:31.503Z,1513238551.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:31.872Z,1513238551.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:31.887Z,1513238551.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:32.050Z,1513238552.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:32.262Z,1513238552.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:32.312Z,1513238552.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:32.679Z,1513238552.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:32.712Z,1513238552.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:32.847Z,1513238552.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:33.086Z,1513238553.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:33.102Z,1513238553.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:33.265Z,1513238553.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:33.479Z,1513238553.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:33.508Z,1513238553.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:33.859Z,1513238553.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:33.896Z,1513238553.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:34.061Z,1513238554.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:34.267Z,1513238554.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:34.319Z,1513238554.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:34.670Z,1513238554.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:34.696Z,1513238554.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:34.857Z,1513238554.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:35.078Z,1513238555.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:35.123Z,1513238555.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:35.261Z,1513238555.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:35.474Z,1513238555.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:35.500Z,1513238555.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:35.868Z,1513238555.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:35.883Z,1513238555.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:36.057Z,1513238556.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:36.268Z,1513238556.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:36.283Z,1513238556.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:36.688Z,1513238556.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:36.723Z,1513238556.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:36.854Z,1513238556.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:37.081Z,1513238557.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:37.096Z,1513238557.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:37.257Z,1513238557.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:37.477Z,1513238557.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:37.499Z,1513238557.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:37.855Z,1513238557.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:37.891Z,1513238557.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:38.054Z,1513238558.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:38.262Z,1513238558.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:38.294Z,1513238558.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:38.668Z,1513238558.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:38.682Z,1513238558.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:38.850Z,1513238558.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:39.077Z,1513238559.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:39.091Z,1513238559.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:39.253Z,1513238559.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:39.477Z,1513238559.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:39.492Z,1513238559.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:39.902Z,1513238559.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:39.973Z,1513238559.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:40.266Z,1513238560.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:40.286Z,1513238560.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:40.682Z,1513238560.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:40.696Z,1513238560.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:41.077Z,1513238561.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:41.092Z,1513238561.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:41.456Z,1513238561.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:41.493Z,1513238561.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:41.878Z,1513238561.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:41.894Z,1513238561.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:42.281Z,1513238562.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:42.297Z,1513238562.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:42.677Z,1513238562.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:42.692Z,1513238562.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:43.059Z,1513238563.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:43.111Z,1513238563.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:43.472Z,1513238563.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:43.529Z,1513238563.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:43.865Z,1513238563.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:43.880Z,1513238563.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:44.268Z,1513238564.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:44.284Z,1513238564.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:44.672Z,1513238564.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:44.687Z,1513238564.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:45.073Z,1513238565.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:45.088Z,1513238565.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:45.473Z,1513238565.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:45.488Z,1513238565.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:45.872Z,1513238565.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:45.886Z,1513238565.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:46.052Z,1513238566.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:46.287Z,1513238566.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:46.327Z,1513238566.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:46.675Z,1513238566.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:46.692Z,1513238566.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:46.847Z,1513238566.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:47.076Z,1513238567.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:47.095Z,1513238567.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:47.261Z,1513238567.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:47.474Z,1513238567.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:47.489Z,1513238567.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:47.875Z,1513238567.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:47.890Z,1513238567.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:48.060Z,1513238568.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:48.266Z,1513238568.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:48.291Z,1513238568.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:48.675Z,1513238568.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:48.702Z,1513238568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:48.853Z,1513238568.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:49.088Z,1513238569.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:49.104Z,1513238569.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:49.257Z,1513238569.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:49.483Z,1513238569.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:49.543Z,1513238569.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:49.856Z,1513238569.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:49.883Z,1513238569.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:50.054Z,1513238570.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:50.263Z,1513238570.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:50.295Z,1513238570.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:50.668Z,1513238570.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:50.696Z,1513238570.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:50.849Z,1513238570.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:51.078Z,1513238571.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:51.101Z,1513238571.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:51.253Z,1513238571.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:51.470Z,1513238571.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:51.499Z,1513238571.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:51.863Z,1513238571.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:51.895Z,1513238571.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:52.049Z,1513238572.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:52.260Z,1513238572.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:52.295Z,1513238572.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:52.672Z,1513238572.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:52.707Z,1513238572.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:52.846Z,1513238572.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:53.082Z,1513238573.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:53.101Z,1513238573.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:53.249Z,1513238573.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:53.481Z,1513238573.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:53.496Z,1513238573.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:53.867Z,1513238573.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:53.893Z,1513238573.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:54.046Z,1513238574.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:54.258Z,1513238574.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:54.295Z,1513238574.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:54.692Z,1513238574.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:54.707Z,1513238574.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:54.841Z,1513238574.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:55.095Z,1513238575.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:55.110Z,1513238575.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:55.245Z,1513238575.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:55.474Z,1513238575.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:55.519Z,1513238575.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:55.873Z,1513238575.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:55.963Z,1513238575.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:56.270Z,1513238576.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:56.308Z,1513238576.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:56.677Z,1513238576.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:56.692Z,1513238576.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:57.078Z,1513238577.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:57.131Z,1513238577.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:57.483Z,1513238577.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:57.512Z,1513238577.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:57.864Z,1513238577.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:57.911Z,1513238577.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:58.260Z,1513238578.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:58.284Z,1513238578.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:58.683Z,1513238578.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:58.718Z,1513238578.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:59.077Z,1513238579.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:59.163Z,1513238579.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:59.479Z,1513238579.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:59.512Z,1513238579.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:02:59.877Z,1513238579.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:02:59.892Z,1513238579.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:00.049Z,1513238580.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:00.259Z,1513238580.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:00.293Z,1513238580.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:00.678Z,1513238580.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:00.694Z,1513238580.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:00.847Z,1513238580.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:01.079Z,1513238581.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:01.098Z,1513238581.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:01.261Z,1513238581.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:01.481Z,1513238581.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:01.496Z,1513238581.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:01.858Z,1513238581.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:01.884Z,1513238581.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:02.058Z,1513238582.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:02.275Z,1513238582.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:02.306Z,1513238582.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:02.669Z,1513238582.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:02.700Z,1513238582.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:02.853Z,1513238582.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:03.073Z,1513238583.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:03.107Z,1513238583.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:03.257Z,1513238583.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:03.473Z,1513238583.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:03.503Z,1513238583.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:03.867Z,1513238583.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:03.899Z,1513238583.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:04.054Z,1513238584.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:04.256Z,1513238584.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:04.272Z,1513238584.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:04.669Z,1513238584.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:04.698Z,1513238584.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:04.849Z,1513238584.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:05.073Z,1513238585.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:05.108Z,1513238585.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:05.253Z,1513238585.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:05.476Z,1513238585.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:05.505Z,1513238585.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:05.863Z,1513238585.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:05.883Z,1513238585.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:05.902Z,1513238585.902 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:03:05.902Z,1513238585.902 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:03:05.903Z,1513238585.903 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:03:05.903Z,1513238585.903 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:03:06.049Z,1513238586.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:06.265Z,1513238586.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:06.310Z,1513238586.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:06.313Z,1513238586.313 [Default:CheckIn:D] Stopped
2017-12-14T08:03:06.313Z,1513238586.313 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:03:06.678Z,1513238586.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:06.707Z,1513238586.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:06.711Z,1513238586.711 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 449.848730 min 
2017-12-14T08:03:06.711Z,1513238586.711 [Default:CheckIn:E] Stopped
2017-12-14T08:03:06.711Z,1513238586.711 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:03:06.711Z,1513238586.711 [Default:CheckIn] Stopped
2017-12-14T08:03:06.711Z,1513238586.711 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:03:06.712Z,1513238586.712 [Default:CheckIn](INFO): Running loop #44
2017-12-14T08:03:06.712Z,1513238586.712 [Default:CheckIn] Running Loop=44
2017-12-14T08:03:06.712Z,1513238586.712 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:03:06.712Z,1513238586.712 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:03:06.845Z,1513238586.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:07.249Z,1513238587.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:10.107Z,1513238590.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:10.122Z,1513238590.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:10.230Z,1513238590.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:10.266Z,1513238590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:10.621Z,1513238590.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:10.659Z,1513238590.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:10.976Z,1513238590.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:11.008Z,1513238591.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:11.375Z,1513238591.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:11.419Z,1513238591.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:11.791Z,1513238591.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:11.816Z,1513238591.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:12.065Z,1513238592.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:12.185Z,1513238592.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:12.206Z,1513238592.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:12.583Z,1513238592.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:12.613Z,1513238592.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:12.863Z,1513238592.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:12.976Z,1513238592.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:12.990Z,1513238592.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:13.273Z,1513238593.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:13.376Z,1513238593.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:13.391Z,1513238593.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:13.775Z,1513238593.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:13.795Z,1513238593.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:14.070Z,1513238594.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:14.179Z,1513238594.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:14.193Z,1513238594.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:14.581Z,1513238594.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:14.596Z,1513238594.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:14.870Z,1513238594.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:14.994Z,1513238594.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:15.045Z,1513238595.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:15.277Z,1513238595.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:15.394Z,1513238595.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:15.429Z,1513238595.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:15.785Z,1513238595.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:15.800Z,1513238595.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:16.074Z,1513238596.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:16.179Z,1513238596.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:16.194Z,1513238596.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:16.581Z,1513238596.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:16.603Z,1513238596.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:16.869Z,1513238596.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:16.986Z,1513238596.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:17.001Z,1513238597.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:17.273Z,1513238597.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:17.376Z,1513238597.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:17.388Z,1513238597.388 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T08:03:17.388Z,1513238597.388 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:03:17.388Z,1513238597.388 [BPC1](ERROR): Data Fault
2017-12-14T08:03:17.409Z,1513238597.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:17.435Z,1513238597.435 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:03:17.789Z,1513238597.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:17.804Z,1513238597.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:18.069Z,1513238598.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:18.215Z,1513238598.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:18.277Z,1513238598.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:18.588Z,1513238598.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:18.603Z,1513238598.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:18.633Z,1513238598.633 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:03:18.633Z,1513238598.633 [BPC1] No Fault, FailCount= 1
2017-12-14T08:03:18.868Z,1513238598.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:18.988Z,1513238598.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:19.055Z,1513238599.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:19.273Z,1513238599.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:19.378Z,1513238599.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:19.393Z,1513238599.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:19.784Z,1513238599.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:19.799Z,1513238599.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:20.070Z,1513238600.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:20.178Z,1513238600.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:20.194Z,1513238600.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:20.581Z,1513238600.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:20.607Z,1513238600.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:20.867Z,1513238600.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:20.988Z,1513238600.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:21.003Z,1513238601.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:21.273Z,1513238601.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:21.417Z,1513238601.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:21.442Z,1513238601.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:21.794Z,1513238601.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:21.815Z,1513238601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:22.072Z,1513238602.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:22.168Z,1513238602.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:22.198Z,1513238602.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:22.578Z,1513238602.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:22.619Z,1513238602.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:22.865Z,1513238602.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:22.985Z,1513238602.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:22.000Z,1513238603.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:23.271Z,1513238603.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:23.374Z,1513238603.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:23.404Z,1513238603.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:23.793Z,1513238603.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:23.808Z,1513238603.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:24.066Z,1513238604.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:24.194Z,1513238604.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:24.208Z,1513238604.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:24.633Z,1513238604.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:24.682Z,1513238604.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:24.863Z,1513238604.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:24.984Z,1513238604.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:25.000Z,1513238605.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:25.265Z,1513238605.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:25.375Z,1513238605.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:25.403Z,1513238605.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:25.775Z,1513238605.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:25.796Z,1513238605.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:26.064Z,1513238606.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:26.181Z,1513238606.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:26.196Z,1513238606.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:26.584Z,1513238606.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:26.599Z,1513238606.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:26.859Z,1513238606.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:26.985Z,1513238606.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:27.001Z,1513238607.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:27.277Z,1513238607.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:27.387Z,1513238607.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:27.438Z,1513238607.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:27.871Z,1513238607.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:27.940Z,1513238607.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:28.073Z,1513238608.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:28.179Z,1513238608.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:28.194Z,1513238608.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:28.574Z,1513238608.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:28.606Z,1513238608.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:28.870Z,1513238608.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:28.986Z,1513238608.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:29.001Z,1513238609.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:29.277Z,1513238609.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:29.383Z,1513238609.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:29.399Z,1513238609.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:29.783Z,1513238609.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:29.799Z,1513238609.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:30.074Z,1513238610.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:30.189Z,1513238610.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:30.204Z,1513238610.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:30.585Z,1513238610.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:30.607Z,1513238610.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:30.869Z,1513238610.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:30.975Z,1513238610.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:31.002Z,1513238611.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:31.273Z,1513238611.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:31.392Z,1513238611.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:31.406Z,1513238611.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:31.764Z,1513238611.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:31.799Z,1513238611.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:32.070Z,1513238612.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:32.175Z,1513238612.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:32.201Z,1513238612.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:32.572Z,1513238612.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:32.605Z,1513238612.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:32.865Z,1513238612.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:32.991Z,1513238612.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:33.009Z,1513238613.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:33.269Z,1513238613.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:33.398Z,1513238613.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:33.412Z,1513238613.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:33.792Z,1513238613.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:33.811Z,1513238613.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:34.065Z,1513238614.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:34.221Z,1513238614.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:34.261Z,1513238614.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:34.572Z,1513238614.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:34.607Z,1513238614.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:34.861Z,1513238614.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:34.971Z,1513238614.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:35.003Z,1513238615.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:35.265Z,1513238615.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:35.375Z,1513238615.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:35.410Z,1513238615.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:35.799Z,1513238615.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:35.814Z,1513238615.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:36.062Z,1513238616.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:36.198Z,1513238616.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:36.218Z,1513238616.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:36.582Z,1513238616.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:36.610Z,1513238616.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:36.857Z,1513238616.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:36.971Z,1513238616.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:36.987Z,1513238616.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:37.261Z,1513238617.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:37.386Z,1513238617.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:37.422Z,1513238617.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:37.776Z,1513238617.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:37.805Z,1513238617.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:38.058Z,1513238618.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:38.177Z,1513238618.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:38.191Z,1513238618.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:38.611Z,1513238618.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:38.641Z,1513238618.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:38.854Z,1513238618.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:38.984Z,1513238618.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:39.007Z,1513238619.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:39.257Z,1513238619.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:39.390Z,1513238619.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:39.451Z,1513238619.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:39.786Z,1513238619.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:39.800Z,1513238619.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:40.054Z,1513238620.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:40.175Z,1513238620.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:40.195Z,1513238620.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:40.590Z,1513238620.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:40.643Z,1513238620.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:40.851Z,1513238620.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:40.982Z,1513238620.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:40.996Z,1513238620.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:41.257Z,1513238621.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:41.376Z,1513238621.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:41.423Z,1513238621.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:41.785Z,1513238621.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:41.800Z,1513238621.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:42.056Z,1513238622.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:42.190Z,1513238622.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:42.204Z,1513238622.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:42.594Z,1513238622.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:42.608Z,1513238622.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:42.851Z,1513238622.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:42.979Z,1513238622.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:42.999Z,1513238622.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:43.277Z,1513238623.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:43.383Z,1513238623.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:43.403Z,1513238623.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:43.807Z,1513238623.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:43.836Z,1513238623.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:44.074Z,1513238624.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:44.178Z,1513238624.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:44.195Z,1513238624.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:44.595Z,1513238624.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:44.657Z,1513238624.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:44.870Z,1513238624.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:44.990Z,1513238624.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:45.005Z,1513238625.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:45.273Z,1513238625.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:45.388Z,1513238625.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:45.403Z,1513238625.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:45.790Z,1513238625.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:45.811Z,1513238625.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:46.069Z,1513238626.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:46.182Z,1513238626.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:46.203Z,1513238626.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:46.580Z,1513238626.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:46.602Z,1513238626.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:46.867Z,1513238626.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:46.989Z,1513238626.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:47.024Z,1513238627.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:47.269Z,1513238627.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:47.371Z,1513238627.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:47.397Z,1513238627.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:47.794Z,1513238627.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:47.809Z,1513238627.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:48.066Z,1513238628.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:48.186Z,1513238628.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:48.217Z,1513238628.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:48.596Z,1513238628.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:48.615Z,1513238628.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:48.861Z,1513238628.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:48.979Z,1513238628.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:49.006Z,1513238629.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:49.265Z,1513238629.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:49.375Z,1513238629.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:49.390Z,1513238629.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:49.777Z,1513238629.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:49.823Z,1513238629.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:50.062Z,1513238630.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:50.233Z,1513238630.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:50.274Z,1513238630.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:50.582Z,1513238630.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:50.613Z,1513238630.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:50.857Z,1513238630.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:50.995Z,1513238630.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:51.020Z,1513238631.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:51.261Z,1513238631.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:51.390Z,1513238631.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:51.421Z,1513238631.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:51.789Z,1513238631.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:51.804Z,1513238631.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:52.061Z,1513238632.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:52.176Z,1513238632.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:52.205Z,1513238632.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:52.609Z,1513238632.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:52.640Z,1513238632.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:52.858Z,1513238632.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:52.971Z,1513238632.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:53.013Z,1513238633.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:53.261Z,1513238633.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:53.379Z,1513238633.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:53.423Z,1513238633.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:53.781Z,1513238633.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:53.812Z,1513238633.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:54.057Z,1513238634.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:54.198Z,1513238634.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:54.213Z,1513238634.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:54.581Z,1513238634.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:54.607Z,1513238634.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:54.855Z,1513238634.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:54.975Z,1513238634.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:55.008Z,1513238635.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:55.265Z,1513238635.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:55.371Z,1513238635.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:55.406Z,1513238635.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:55.771Z,1513238635.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:55.812Z,1513238635.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:56.062Z,1513238636.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:56.179Z,1513238636.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:56.216Z,1513238636.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:56.586Z,1513238636.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:56.639Z,1513238636.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:56.859Z,1513238636.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:56.982Z,1513238636.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:57.013Z,1513238637.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:57.269Z,1513238637.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:57.393Z,1513238637.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:57.423Z,1513238637.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:57.789Z,1513238637.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:57.823Z,1513238637.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:58.066Z,1513238638.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:58.176Z,1513238638.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:58.192Z,1513238638.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:58.591Z,1513238638.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:58.613Z,1513238638.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:58.861Z,1513238638.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:58.987Z,1513238638.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:59.015Z,1513238639.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:59.265Z,1513238639.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:59.382Z,1513238639.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:59.405Z,1513238639.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:03:59.826Z,1513238639.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:03:59.847Z,1513238639.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:00.061Z,1513238640.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:00.193Z,1513238640.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:00.226Z,1513238640.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:00.592Z,1513238640.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:00.627Z,1513238640.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:00.857Z,1513238640.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:00.980Z,1513238640.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:00.999Z,1513238640.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:01.261Z,1513238641.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:01.376Z,1513238641.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:01.435Z,1513238641.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:01.785Z,1513238641.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:01.839Z,1513238641.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:02.058Z,1513238642.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:02.186Z,1513238642.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:02.200Z,1513238642.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:02.588Z,1513238642.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:02.631Z,1513238642.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:02.853Z,1513238642.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:03.008Z,1513238643.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:03.046Z,1513238643.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:03.257Z,1513238643.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:03.393Z,1513238643.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:03.446Z,1513238643.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:03.794Z,1513238643.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:03.809Z,1513238643.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:04.054Z,1513238644.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:04.171Z,1513238644.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:04.207Z,1513238644.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:04.572Z,1513238644.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:04.611Z,1513238644.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:04.849Z,1513238644.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:04.973Z,1513238644.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:05.000Z,1513238645.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:05.253Z,1513238645.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:05.371Z,1513238645.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:05.388Z,1513238645.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:05.786Z,1513238645.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:05.814Z,1513238645.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:06.050Z,1513238646.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:06.227Z,1513238646.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:06.271Z,1513238646.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:06.635Z,1513238646.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:06.658Z,1513238646.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:06.845Z,1513238646.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:06.982Z,1513238646.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:07.015Z,1513238647.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:07.249Z,1513238647.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:08.046Z,1513238648.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:08.851Z,1513238648.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:09.269Z,1513238649.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.066Z,1513238650.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.453Z,1513238650.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.468Z,1513238650.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:10.568Z,1513238650.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.609Z,1513238650.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:10.863Z,1513238650.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.950Z,1513238650.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:10.971Z,1513238650.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:11.269Z,1513238651.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:11.338Z,1513238651.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:11.369Z,1513238651.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:11.730Z,1513238651.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:11.779Z,1513238651.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:12.066Z,1513238652.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:12.125Z,1513238652.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:12.139Z,1513238652.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:12.578Z,1513238652.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:12.618Z,1513238652.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:12.861Z,1513238652.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:12.936Z,1513238652.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:12.951Z,1513238652.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:13.265Z,1513238653.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:13.315Z,1513238653.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:13.347Z,1513238653.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:13.741Z,1513238653.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:13.756Z,1513238653.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:14.061Z,1513238654.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:14.137Z,1513238654.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:14.160Z,1513238654.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:14.555Z,1513238654.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:14.621Z,1513238654.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:14.859Z,1513238654.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:14.936Z,1513238654.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:14.951Z,1513238654.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:15.265Z,1513238655.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:15.322Z,1513238655.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:15.345Z,1513238655.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:15.715Z,1513238655.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:15.746Z,1513238655.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:16.062Z,1513238656.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:16.115Z,1513238656.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:16.153Z,1513238656.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:16.550Z,1513238656.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:16.589Z,1513238656.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:16.857Z,1513238656.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:16.936Z,1513238656.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:16.955Z,1513238656.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:17.261Z,1513238657.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:17.339Z,1513238657.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:17.353Z,1513238657.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:17.730Z,1513238657.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:17.760Z,1513238657.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:18.058Z,1513238658.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:18.114Z,1513238658.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:18.138Z,1513238658.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:18.564Z,1513238658.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:18.583Z,1513238658.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:18.853Z,1513238658.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:18.925Z,1513238658.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:18.948Z,1513238658.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:19.257Z,1513238659.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:19.320Z,1513238659.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:19.343Z,1513238659.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:19.738Z,1513238659.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:19.768Z,1513238659.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:20.057Z,1513238660.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:20.130Z,1513238660.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:20.151Z,1513238660.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:20.590Z,1513238660.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:20.625Z,1513238660.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:20.853Z,1513238660.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:20.919Z,1513238660.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:20.947Z,1513238660.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:21.257Z,1513238661.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:21.328Z,1513238661.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:21.343Z,1513238661.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:21.725Z,1513238661.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:21.740Z,1513238661.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:22.054Z,1513238662.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:22.129Z,1513238662.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:22.144Z,1513238662.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:22.550Z,1513238662.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:22.577Z,1513238662.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:22.852Z,1513238662.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:22.928Z,1513238662.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:22.963Z,1513238662.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:23.261Z,1513238663.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:23.342Z,1513238663.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:23.391Z,1513238663.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:23.729Z,1513238663.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:23.790Z,1513238663.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:24.059Z,1513238664.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:24.129Z,1513238664.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:24.144Z,1513238664.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:24.522Z,1513238664.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:24.578Z,1513238664.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:24.855Z,1513238664.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:24.918Z,1513238664.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:24.958Z,1513238664.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:25.281Z,1513238665.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:25.314Z,1513238665.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:25.366Z,1513238665.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:25.784Z,1513238665.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:25.816Z,1513238665.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:26.078Z,1513238666.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:26.130Z,1513238666.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:26.149Z,1513238666.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:26.581Z,1513238666.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:26.596Z,1513238666.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:26.873Z,1513238666.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:26.930Z,1513238666.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:26.957Z,1513238666.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:27.277Z,1513238667.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:27.328Z,1513238667.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:27.348Z,1513238667.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:27.722Z,1513238667.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:27.737Z,1513238667.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:28.073Z,1513238668.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:28.127Z,1513238668.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:28.142Z,1513238668.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:28.563Z,1513238668.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:28.601Z,1513238668.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:28.869Z,1513238668.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:28.956Z,1513238668.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:28.992Z,1513238668.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:29.273Z,1513238669.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:29.330Z,1513238669.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:29.359Z,1513238669.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:29.730Z,1513238669.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:29.758Z,1513238669.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:30.070Z,1513238670.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:30.123Z,1513238670.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:30.150Z,1513238670.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:30.561Z,1513238670.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:30.588Z,1513238670.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:30.866Z,1513238670.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:30.934Z,1513238670.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:30.961Z,1513238670.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:31.269Z,1513238671.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:31.319Z,1513238671.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:31.346Z,1513238671.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:31.737Z,1513238671.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:31.774Z,1513238671.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:32.065Z,1513238672.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:32.143Z,1513238672.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:32.179Z,1513238672.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:32.582Z,1513238672.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:32.597Z,1513238672.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:32.861Z,1513238672.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:32.931Z,1513238672.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:32.950Z,1513238672.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:33.265Z,1513238673.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:33.327Z,1513238673.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:33.347Z,1513238673.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:33.726Z,1513238673.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:33.783Z,1513238673.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:34.064Z,1513238674.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:34.124Z,1513238674.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:34.139Z,1513238674.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:34.541Z,1513238674.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:34.606Z,1513238674.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:34.857Z,1513238674.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:34.930Z,1513238674.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:34.953Z,1513238674.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:35.261Z,1513238675.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:35.391Z,1513238675.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:35.441Z,1513238675.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:35.741Z,1513238675.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:35.755Z,1513238675.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:36.058Z,1513238676.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:36.115Z,1513238676.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:36.146Z,1513238676.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:36.513Z,1513238676.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:36.528Z,1513238676.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:36.855Z,1513238676.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:36.955Z,1513238676.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:36.975Z,1513238676.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:37.314Z,1513238677.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:37.316Z,1513238677.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:37.332Z,1513238677.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:37.332Z,1513238677.332 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151
2017-12-14T08:04:37.332Z,1513238677.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:04:37.358Z,1513238677.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:37.358Z,1513238677.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 151
2017-12-14T08:04:37.358Z,1513238677.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:04:37.360Z,1513238677.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:37.360Z,1513238677.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2017-12-14T08:04:37.360Z,1513238677.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:04:37.393Z,1513238677.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:04:37.393Z,1513238677.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:04:37.393Z,1513238677.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:04:37.734Z,1513238677.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:37.768Z,1513238677.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:04:37.768Z,1513238677.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151
2017-12-14T08:04:37.769Z,1513238677.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:04:37.769Z,1513238677.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 151
2017-12-14T08:04:37.769Z,1513238677.769 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:04:37.770Z,1513238677.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2017-12-14T08:04:38.110Z,1513238678.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:38.135Z,1513238678.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:38.162Z,1513238678.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:04:38.162Z,1513238678.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:04:38.163Z,1513238678.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:04:38.163Z,1513238678.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:04:38.163Z,1513238678.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:04:38.164Z,1513238678.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:04:38.164Z,1513238678.164 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:04:38.169Z,1513238678.169 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:04:38.169Z,1513238678.169 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:04:38.575Z,1513238678.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:38.626Z,1513238678.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:38.908Z,1513238678.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:38.926Z,1513238678.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:38.966Z,1513238678.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:39.314Z,1513238679.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:39.326Z,1513238679.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:39.342Z,1513238679.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:39.724Z,1513238679.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:39.740Z,1513238679.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:40.110Z,1513238680.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:40.126Z,1513238680.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:40.141Z,1513238680.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:40.571Z,1513238680.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:40.599Z,1513238680.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:40.912Z,1513238680.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:40.931Z,1513238680.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:40.949Z,1513238680.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:41.317Z,1513238681.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:41.334Z,1513238681.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:41.350Z,1513238681.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:41.777Z,1513238681.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:41.807Z,1513238681.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:42.114Z,1513238682.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:42.141Z,1513238682.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:42.155Z,1513238682.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:42.562Z,1513238682.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:42.586Z,1513238682.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:42.910Z,1513238682.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:42.938Z,1513238682.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:42.966Z,1513238682.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:43.316Z,1513238683.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:43.329Z,1513238683.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:43.344Z,1513238683.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:43.732Z,1513238683.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:43.751Z,1513238683.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:44.110Z,1513238684.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:44.144Z,1513238684.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:44.159Z,1513238684.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:44.576Z,1513238684.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:44.597Z,1513238684.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:44.908Z,1513238684.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:44.935Z,1513238684.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:44.982Z,1513238684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:45.314Z,1513238685.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:45.316Z,1513238685.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:45.387Z,1513238685.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:45.715Z,1513238685.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:45.747Z,1513238685.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:46.110Z,1513238686.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:46.120Z,1513238686.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:46.168Z,1513238686.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:46.558Z,1513238686.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:46.599Z,1513238686.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:46.905Z,1513238686.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:46.930Z,1513238686.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:46.976Z,1513238686.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:47.309Z,1513238687.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:47.337Z,1513238687.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:47.387Z,1513238687.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:47.731Z,1513238687.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:47.761Z,1513238687.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:48.108Z,1513238688.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:48.136Z,1513238688.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:48.200Z,1513238688.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:48.536Z,1513238688.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:48.627Z,1513238688.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:48.901Z,1513238688.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:48.922Z,1513238688.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:48.936Z,1513238688.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:49.306Z,1513238689.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:49.321Z,1513238689.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:49.336Z,1513238689.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:49.734Z,1513238689.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:49.757Z,1513238689.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:50.102Z,1513238690.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:50.143Z,1513238690.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:50.175Z,1513238690.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:50.542Z,1513238690.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:50.568Z,1513238690.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:50.897Z,1513238690.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:50.931Z,1513238690.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:50.964Z,1513238690.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:51.301Z,1513238691.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:51.349Z,1513238691.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:51.380Z,1513238691.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:51.735Z,1513238691.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:51.755Z,1513238691.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:52.098Z,1513238692.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:52.112Z,1513238692.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:52.150Z,1513238692.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:52.519Z,1513238692.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:52.551Z,1513238692.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:52.893Z,1513238692.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:52.950Z,1513238692.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:52.964Z,1513238692.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:53.297Z,1513238693.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:53.343Z,1513238693.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:53.357Z,1513238693.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:53.734Z,1513238693.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:53.753Z,1513238693.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:54.094Z,1513238694.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:54.138Z,1513238694.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:54.153Z,1513238694.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:54.578Z,1513238694.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:54.647Z,1513238694.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:54.889Z,1513238694.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:54.916Z,1513238694.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:54.955Z,1513238694.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:55.293Z,1513238695.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:55.319Z,1513238695.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:55.356Z,1513238695.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:55.733Z,1513238695.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:55.758Z,1513238695.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:56.090Z,1513238696.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:56.147Z,1513238696.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:56.162Z,1513238696.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:56.566Z,1513238696.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:56.616Z,1513238696.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:56.897Z,1513238696.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:56.920Z,1513238696.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:56.959Z,1513238696.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:57.301Z,1513238697.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:57.327Z,1513238697.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:57.343Z,1513238697.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:57.720Z,1513238697.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:57.739Z,1513238697.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:58.098Z,1513238698.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:58.131Z,1513238698.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:58.151Z,1513238698.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:58.569Z,1513238698.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:58.602Z,1513238698.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:58.893Z,1513238698.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:58.950Z,1513238698.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:58.979Z,1513238698.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:59.297Z,1513238699.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:59.333Z,1513238699.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:59.347Z,1513238699.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:04:59.728Z,1513238699.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:04:59.744Z,1513238699.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:00.093Z,1513238700.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:00.122Z,1513238700.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:00.144Z,1513238700.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:00.564Z,1513238700.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:00.601Z,1513238700.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:00.889Z,1513238700.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:00.969Z,1513238700.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:01.018Z,1513238701.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:01.293Z,1513238701.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:01.338Z,1513238701.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:01.353Z,1513238701.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:01.737Z,1513238701.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:01.759Z,1513238701.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:02.090Z,1513238702.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:02.141Z,1513238702.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:02.156Z,1513238702.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:02.549Z,1513238702.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:02.635Z,1513238702.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:02.898Z,1513238702.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:02.929Z,1513238702.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:02.956Z,1513238702.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:03.302Z,1513238703.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:03.316Z,1513238703.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:03.343Z,1513238703.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:03.729Z,1513238703.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:03.745Z,1513238703.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:04.097Z,1513238704.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:04.151Z,1513238704.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:04.190Z,1513238704.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:04.515Z,1513238704.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:04.547Z,1513238704.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:04.893Z,1513238704.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:04.946Z,1513238704.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:04.961Z,1513238704.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:05.297Z,1513238705.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:05.341Z,1513238705.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:05.357Z,1513238705.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:05.743Z,1513238705.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:05.758Z,1513238705.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:06.093Z,1513238706.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:06.123Z,1513238706.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:06.153Z,1513238706.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:06.515Z,1513238706.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:06.547Z,1513238706.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:06.894Z,1513238706.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:06.924Z,1513238706.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:06.962Z,1513238706.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:07.317Z,1513238707.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:07.365Z,1513238707.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:07.419Z,1513238707.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:08.114Z,1513238708.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:08.910Z,1513238708.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:09.313Z,1513238709.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:10.109Z,1513238710.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:10.873Z,1513238710.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:10.905Z,1513238710.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:10.970Z,1513238710.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:11.078Z,1513238711.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:11.115Z,1513238711.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:11.309Z,1513238711.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:11.446Z,1513238711.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:11.468Z,1513238711.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:11.832Z,1513238711.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:11.867Z,1513238711.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:12.105Z,1513238712.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:12.228Z,1513238712.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:12.296Z,1513238712.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:12.628Z,1513238712.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:12.659Z,1513238712.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:12.901Z,1513238712.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:13.042Z,1513238713.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:13.098Z,1513238713.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:13.305Z,1513238713.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:13.450Z,1513238713.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:13.471Z,1513238713.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:13.848Z,1513238713.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:13.872Z,1513238713.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:14.101Z,1513238714.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:14.234Z,1513238714.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:14.258Z,1513238714.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:14.627Z,1513238714.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:14.644Z,1513238714.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:14.897Z,1513238714.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:15.042Z,1513238715.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:15.071Z,1513238715.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:15.301Z,1513238715.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:15.427Z,1513238715.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:15.443Z,1513238715.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:15.847Z,1513238715.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:15.872Z,1513238715.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:16.098Z,1513238716.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:16.244Z,1513238716.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:16.273Z,1513238716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:16.638Z,1513238716.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:16.652Z,1513238716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:16.893Z,1513238716.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:17.035Z,1513238717.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:17.099Z,1513238717.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:17.297Z,1513238717.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:17.442Z,1513238717.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:17.457Z,1513238717.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:17.842Z,1513238717.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:17.856Z,1513238717.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:18.093Z,1513238718.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:18.239Z,1513238718.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:18.255Z,1513238718.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:18.634Z,1513238718.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:18.648Z,1513238718.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:18.890Z,1513238718.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:19.057Z,1513238719.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:19.072Z,1513238719.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:19.293Z,1513238719.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:19.449Z,1513238719.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:19.471Z,1513238719.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:19.850Z,1513238719.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:19.864Z,1513238719.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:20.089Z,1513238720.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:20.267Z,1513238720.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:20.308Z,1513238720.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:20.627Z,1513238720.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:20.653Z,1513238720.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:20.886Z,1513238720.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:21.027Z,1513238721.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:21.053Z,1513238721.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:21.289Z,1513238721.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:21.426Z,1513238721.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:21.476Z,1513238721.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:21.849Z,1513238721.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:21.868Z,1513238721.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:22.086Z,1513238722.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:22.297Z,1513238722.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:22.332Z,1513238722.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:22.649Z,1513238722.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:22.683Z,1513238722.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:22.881Z,1513238722.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:23.038Z,1513238723.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:23.053Z,1513238723.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:23.285Z,1513238723.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:23.437Z,1513238723.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:23.452Z,1513238723.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:23.848Z,1513238723.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:23.863Z,1513238723.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:24.084Z,1513238724.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:24.242Z,1513238724.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:24.257Z,1513238724.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:24.626Z,1513238724.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:24.663Z,1513238724.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:24.877Z,1513238724.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:25.043Z,1513238725.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:25.066Z,1513238725.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:25.283Z,1513238725.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:25.448Z,1513238725.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:25.464Z,1513238725.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:25.850Z,1513238725.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:25.865Z,1513238725.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:26.077Z,1513238726.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:26.227Z,1513238726.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:26.254Z,1513238726.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:26.650Z,1513238726.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:26.696Z,1513238726.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:26.874Z,1513238726.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:27.028Z,1513238727.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:27.063Z,1513238727.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:27.277Z,1513238727.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:27.430Z,1513238727.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:27.466Z,1513238727.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:27.852Z,1513238727.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:27.867Z,1513238727.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:28.074Z,1513238728.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:28.250Z,1513238728.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:28.274Z,1513238728.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:28.638Z,1513238728.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:28.664Z,1513238728.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:28.869Z,1513238728.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:29.038Z,1513238729.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:29.064Z,1513238729.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:29.273Z,1513238729.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:29.427Z,1513238729.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:29.458Z,1513238729.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:29.834Z,1513238729.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:29.915Z,1513238729.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:30.070Z,1513238730.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:30.233Z,1513238730.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:30.255Z,1513238730.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:30.636Z,1513238730.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:30.660Z,1513238730.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:30.865Z,1513238730.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:31.058Z,1513238731.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:31.092Z,1513238731.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:31.269Z,1513238731.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:31.445Z,1513238731.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:31.460Z,1513238731.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:31.845Z,1513238731.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:31.860Z,1513238731.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:32.065Z,1513238732.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:32.240Z,1513238732.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:32.255Z,1513238732.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:32.638Z,1513238732.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:32.659Z,1513238732.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:32.863Z,1513238732.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:33.047Z,1513238733.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:33.091Z,1513238733.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:33.269Z,1513238733.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:33.435Z,1513238733.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:33.503Z,1513238733.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:33.849Z,1513238733.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:33.871Z,1513238733.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:34.066Z,1513238734.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:34.253Z,1513238734.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:34.275Z,1513238734.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:34.643Z,1513238734.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:34.684Z,1513238734.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:34.863Z,1513238734.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:35.047Z,1513238735.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:35.067Z,1513238735.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:35.269Z,1513238735.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:35.446Z,1513238735.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:35.500Z,1513238735.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:35.825Z,1513238735.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:35.862Z,1513238735.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:36.065Z,1513238736.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:36.249Z,1513238736.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:36.280Z,1513238736.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:36.631Z,1513238736.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:36.663Z,1513238736.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:36.861Z,1513238736.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:37.038Z,1513238737.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:37.076Z,1513238737.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:37.265Z,1513238737.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:37.456Z,1513238737.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:37.471Z,1513238737.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:37.837Z,1513238737.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:37.868Z,1513238737.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:38.230Z,1513238738.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:38.263Z,1513238738.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:38.627Z,1513238738.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:38.663Z,1513238738.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:39.035Z,1513238739.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:39.062Z,1513238739.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:39.460Z,1513238739.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:39.479Z,1513238739.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:39.838Z,1513238739.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:39.871Z,1513238739.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:40.249Z,1513238740.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:40.264Z,1513238740.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:40.637Z,1513238740.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:40.675Z,1513238740.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:41.032Z,1513238741.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:41.047Z,1513238741.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:41.440Z,1513238741.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:41.455Z,1513238741.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:41.829Z,1513238741.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:41.844Z,1513238741.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:42.053Z,1513238742.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:42.227Z,1513238742.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:42.256Z,1513238742.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:42.688Z,1513238742.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:42.711Z,1513238742.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:42.849Z,1513238742.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:43.058Z,1513238743.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:43.072Z,1513238743.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:43.253Z,1513238743.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:43.450Z,1513238743.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:43.464Z,1513238743.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:43.827Z,1513238743.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:43.885Z,1513238743.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:44.049Z,1513238744.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:44.242Z,1513238744.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:44.256Z,1513238744.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:44.645Z,1513238744.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:44.663Z,1513238744.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:44.846Z,1513238744.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:45.027Z,1513238745.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:45.059Z,1513238745.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:45.249Z,1513238745.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:45.426Z,1513238745.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:45.453Z,1513238745.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:45.850Z,1513238745.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:45.874Z,1513238745.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:46.046Z,1513238746.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:46.258Z,1513238746.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:46.272Z,1513238746.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:46.653Z,1513238746.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:46.667Z,1513238746.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:46.843Z,1513238746.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:47.027Z,1513238747.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:47.070Z,1513238747.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:47.273Z,1513238747.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:47.426Z,1513238747.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:47.462Z,1513238747.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:47.827Z,1513238747.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:47.863Z,1513238747.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:48.069Z,1513238748.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:48.231Z,1513238748.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:48.270Z,1513238748.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:48.642Z,1513238748.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:48.675Z,1513238748.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:48.867Z,1513238748.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:49.066Z,1513238749.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:49.130Z,1513238749.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:49.273Z,1513238749.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:49.446Z,1513238749.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:49.475Z,1513238749.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:49.833Z,1513238749.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:49.848Z,1513238749.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:50.069Z,1513238750.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:50.232Z,1513238750.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:50.247Z,1513238750.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:50.644Z,1513238750.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:50.672Z,1513238750.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:50.865Z,1513238750.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:51.037Z,1513238751.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:51.052Z,1513238751.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:51.269Z,1513238751.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:51.445Z,1513238751.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:51.478Z,1513238751.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:51.845Z,1513238751.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:51.876Z,1513238751.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:52.254Z,1513238752.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:52.304Z,1513238752.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:52.637Z,1513238752.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:52.659Z,1513238752.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:53.034Z,1513238753.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:53.055Z,1513238753.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:53.435Z,1513238753.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:53.450Z,1513238753.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:53.837Z,1513238753.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:53.853Z,1513238753.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:54.250Z,1513238754.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:54.286Z,1513238754.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:54.638Z,1513238754.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:54.706Z,1513238754.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:55.039Z,1513238755.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:55.059Z,1513238755.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:55.454Z,1513238755.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:55.489Z,1513238755.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:55.828Z,1513238755.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:55.879Z,1513238755.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:56.226Z,1513238756.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:56.259Z,1513238756.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:56.649Z,1513238756.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:56.666Z,1513238756.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:57.046Z,1513238757.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:57.098Z,1513238757.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:57.440Z,1513238757.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:57.477Z,1513238757.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:57.821Z,1513238757.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:57.864Z,1513238757.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:58.249Z,1513238758.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:58.264Z,1513238758.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:58.655Z,1513238758.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:58.711Z,1513238758.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:59.028Z,1513238759.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:59.053Z,1513238759.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:59.427Z,1513238759.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:59.452Z,1513238759.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:05:59.844Z,1513238759.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:05:59.868Z,1513238759.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:00.254Z,1513238760.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:00.275Z,1513238760.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:00.651Z,1513238760.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:00.666Z,1513238760.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:01.027Z,1513238761.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:01.055Z,1513238761.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:01.422Z,1513238761.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:01.443Z,1513238761.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:01.899Z,1513238761.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:01.923Z,1513238761.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:02.227Z,1513238762.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:02.254Z,1513238762.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:02.638Z,1513238762.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:02.675Z,1513238762.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:03.071Z,1513238763.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:03.104Z,1513238763.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:03.452Z,1513238763.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:03.467Z,1513238763.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:03.820Z,1513238763.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:03.836Z,1513238763.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:04.237Z,1513238764.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:04.252Z,1513238764.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:04.638Z,1513238764.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:04.652Z,1513238764.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:05.049Z,1513238765.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:05.092Z,1513238765.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:05.458Z,1513238765.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:05.489Z,1513238765.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:05.842Z,1513238765.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:05.857Z,1513238765.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:06.242Z,1513238766.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:06.291Z,1513238766.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:06.636Z,1513238766.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:06.656Z,1513238766.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:07.034Z,1513238767.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:07.055Z,1513238767.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:07.446Z,1513238767.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:07.462Z,1513238767.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:10.980Z,1513238770.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:10.995Z,1513238770.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:11.106Z,1513238771.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:11.140Z,1513238771.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:11.449Z,1513238771.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:11.497Z,1513238771.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:11.854Z,1513238771.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:11.868Z,1513238771.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:12.248Z,1513238772.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:12.267Z,1513238772.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:12.662Z,1513238772.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:12.696Z,1513238772.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:13.088Z,1513238773.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:13.191Z,1513238773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:13.467Z,1513238773.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:13.495Z,1513238773.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:13.847Z,1513238773.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:13.871Z,1513238773.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:14.243Z,1513238774.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:14.276Z,1513238774.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:14.706Z,1513238774.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:14.734Z,1513238774.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:15.073Z,1513238775.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:15.088Z,1513238775.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:15.473Z,1513238775.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:15.488Z,1513238775.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:15.858Z,1513238775.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:15.887Z,1513238775.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:16.257Z,1513238776.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:16.287Z,1513238776.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:16.650Z,1513238776.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:16.703Z,1513238776.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:17.049Z,1513238777.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:17.088Z,1513238777.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:17.461Z,1513238777.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:17.488Z,1513238777.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:17.861Z,1513238777.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:17.888Z,1513238777.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:18.261Z,1513238778.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:18.340Z,1513238778.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:18.654Z,1513238778.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:18.668Z,1513238778.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:19.063Z,1513238779.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:19.115Z,1513238779.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:19.462Z,1513238779.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:19.481Z,1513238779.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:19.868Z,1513238779.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:19.939Z,1513238779.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:20.255Z,1513238780.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:20.289Z,1513238780.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:20.646Z,1513238780.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:20.701Z,1513238780.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:21.047Z,1513238781.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:21.063Z,1513238781.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:21.467Z,1513238781.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:21.519Z,1513238781.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:21.867Z,1513238781.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:21.912Z,1513238781.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:22.288Z,1513238782.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:22.311Z,1513238782.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:22.658Z,1513238782.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:22.718Z,1513238782.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:23.044Z,1513238783.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:23.082Z,1513238783.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:23.450Z,1513238783.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:23.484Z,1513238783.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:23.868Z,1513238783.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:23.918Z,1513238783.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:24.254Z,1513238784.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:24.280Z,1513238784.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:24.681Z,1513238784.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:24.729Z,1513238784.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:25.067Z,1513238785.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:25.120Z,1513238785.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:25.461Z,1513238785.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:25.509Z,1513238785.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:25.843Z,1513238785.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:25.870Z,1513238785.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:26.101Z,1513238786.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:26.243Z,1513238786.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:26.271Z,1513238786.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:26.646Z,1513238786.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:26.699Z,1513238786.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:26.898Z,1513238786.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:27.071Z,1513238787.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:27.096Z,1513238787.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:27.301Z,1513238787.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:27.487Z,1513238787.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:27.532Z,1513238787.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:27.871Z,1513238787.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:27.931Z,1513238787.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:28.270Z,1513238788.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:28.285Z,1513238788.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:28.643Z,1513238788.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:28.683Z,1513238788.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:29.043Z,1513238789.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:29.076Z,1513238789.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:29.460Z,1513238789.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:29.506Z,1513238789.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:29.859Z,1513238789.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:29.891Z,1513238789.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:30.094Z,1513238790.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:30.260Z,1513238790.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:30.303Z,1513238790.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:30.650Z,1513238790.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:30.676Z,1513238790.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:30.890Z,1513238790.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:31.062Z,1513238791.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:31.125Z,1513238791.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:31.293Z,1513238791.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:31.456Z,1513238791.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:31.506Z,1513238791.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:31.859Z,1513238791.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:31.922Z,1513238791.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:32.090Z,1513238792.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:32.263Z,1513238792.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:32.312Z,1513238792.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:32.658Z,1513238792.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:32.700Z,1513238792.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:32.887Z,1513238792.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:33.054Z,1513238793.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:33.072Z,1513238793.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:33.291Z,1513238793.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:33.463Z,1513238793.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:33.509Z,1513238793.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:33.860Z,1513238793.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:33.903Z,1513238793.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:34.087Z,1513238794.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:34.260Z,1513238794.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:34.291Z,1513238794.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:34.655Z,1513238794.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:34.717Z,1513238794.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:34.882Z,1513238794.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:35.061Z,1513238795.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:35.084Z,1513238795.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:35.287Z,1513238795.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:35.476Z,1513238795.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:35.532Z,1513238795.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:35.859Z,1513238795.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:35.918Z,1513238795.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:36.082Z,1513238796.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:36.263Z,1513238796.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:36.288Z,1513238796.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:36.645Z,1513238796.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:36.700Z,1513238796.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:36.878Z,1513238796.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:37.044Z,1513238797.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:37.077Z,1513238797.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:37.281Z,1513238797.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:37.458Z,1513238797.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:37.472Z,1513238797.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:37.898Z,1513238797.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:37.978Z,1513238797.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:38.078Z,1513238798.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:38.264Z,1513238798.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:38.320Z,1513238798.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:38.645Z,1513238798.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:38.687Z,1513238798.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:38.874Z,1513238798.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:39.043Z,1513238799.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:39.100Z,1513238799.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:39.278Z,1513238799.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:39.465Z,1513238799.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:39.512Z,1513238799.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:39.865Z,1513238799.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:39.915Z,1513238799.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:40.074Z,1513238800.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:40.265Z,1513238800.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:40.291Z,1513238800.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:40.662Z,1513238800.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:40.688Z,1513238800.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:40.870Z,1513238800.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:41.072Z,1513238801.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:41.099Z,1513238801.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:41.274Z,1513238801.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:41.464Z,1513238801.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:41.497Z,1513238801.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:41.863Z,1513238801.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:41.895Z,1513238801.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:42.070Z,1513238802.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:42.256Z,1513238802.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:42.272Z,1513238802.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:42.655Z,1513238802.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:42.712Z,1513238802.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:42.867Z,1513238802.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:43.056Z,1513238803.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:43.080Z,1513238803.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:43.286Z,1513238803.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:43.466Z,1513238803.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:43.516Z,1513238803.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:43.865Z,1513238803.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:43.967Z,1513238803.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:44.083Z,1513238804.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:44.264Z,1513238804.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:44.356Z,1513238804.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:44.644Z,1513238804.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:44.670Z,1513238804.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:44.878Z,1513238804.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:45.058Z,1513238805.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:45.080Z,1513238805.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:45.281Z,1513238805.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:45.466Z,1513238805.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:45.481Z,1513238805.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:45.855Z,1513238805.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:45.875Z,1513238805.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:46.078Z,1513238806.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:46.260Z,1513238806.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:46.274Z,1513238806.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:46.644Z,1513238806.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:46.679Z,1513238806.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:46.873Z,1513238806.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:47.044Z,1513238807.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:47.075Z,1513238807.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:47.277Z,1513238807.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:47.458Z,1513238807.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:47.487Z,1513238807.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:47.866Z,1513238807.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:47.887Z,1513238807.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:48.073Z,1513238808.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:48.258Z,1513238808.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:48.319Z,1513238808.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:48.643Z,1513238808.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:48.679Z,1513238808.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:48.869Z,1513238808.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:49.091Z,1513238809.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:49.163Z,1513238809.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:49.273Z,1513238809.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:49.466Z,1513238809.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:49.480Z,1513238809.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:49.866Z,1513238809.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:49.880Z,1513238809.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:50.070Z,1513238810.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:50.259Z,1513238810.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:50.287Z,1513238810.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:50.657Z,1513238810.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:50.696Z,1513238810.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:50.865Z,1513238810.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:51.043Z,1513238811.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:51.068Z,1513238811.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:51.269Z,1513238811.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:51.467Z,1513238811.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:51.482Z,1513238811.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:51.858Z,1513238811.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:51.889Z,1513238811.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:52.066Z,1513238812.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:52.252Z,1513238812.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:52.278Z,1513238812.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:52.643Z,1513238812.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:52.674Z,1513238812.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:52.861Z,1513238812.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:53.045Z,1513238813.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:53.072Z,1513238813.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:53.265Z,1513238813.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:53.466Z,1513238813.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:53.486Z,1513238813.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:53.874Z,1513238813.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:53.921Z,1513238813.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:54.064Z,1513238814.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:54.254Z,1513238814.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:54.281Z,1513238814.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:54.643Z,1513238814.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:54.687Z,1513238814.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:54.857Z,1513238814.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:55.043Z,1513238815.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:55.060Z,1513238815.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:55.261Z,1513238815.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:55.458Z,1513238815.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:55.485Z,1513238815.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:55.872Z,1513238815.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:55.891Z,1513238815.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:56.057Z,1513238816.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:56.258Z,1513238816.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:56.285Z,1513238816.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:56.644Z,1513238816.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:56.660Z,1513238816.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:56.855Z,1513238816.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:57.057Z,1513238817.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:57.100Z,1513238817.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:57.265Z,1513238817.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:57.466Z,1513238817.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:57.496Z,1513238817.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:57.866Z,1513238817.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:57.891Z,1513238817.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:58.062Z,1513238818.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:58.265Z,1513238818.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:58.289Z,1513238818.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:58.650Z,1513238818.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:58.748Z,1513238818.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:58.859Z,1513238818.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:59.050Z,1513238819.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:59.071Z,1513238819.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:59.269Z,1513238819.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:59.465Z,1513238819.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:59.503Z,1513238819.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:06:59.865Z,1513238819.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:06:59.900Z,1513238819.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:00.066Z,1513238820.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:00.266Z,1513238820.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:00.348Z,1513238820.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:00.658Z,1513238820.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:00.672Z,1513238820.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:00.861Z,1513238820.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:01.054Z,1513238821.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:01.068Z,1513238821.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:01.265Z,1513238821.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:01.459Z,1513238821.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:01.479Z,1513238821.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:01.861Z,1513238821.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:01.876Z,1513238821.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:02.061Z,1513238822.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:02.258Z,1513238822.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:02.272Z,1513238822.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:02.656Z,1513238822.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:02.671Z,1513238822.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:02.858Z,1513238822.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:03.058Z,1513238823.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:03.073Z,1513238823.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:03.261Z,1513238823.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:03.467Z,1513238823.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:03.507Z,1513238823.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:03.861Z,1513238823.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:03.883Z,1513238823.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:04.058Z,1513238824.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:04.258Z,1513238824.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:04.288Z,1513238824.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:04.660Z,1513238824.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:04.692Z,1513238824.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:04.853Z,1513238824.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:05.053Z,1513238825.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:05.069Z,1513238825.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:05.257Z,1513238825.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:05.466Z,1513238825.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:05.495Z,1513238825.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:05.858Z,1513238825.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:05.873Z,1513238825.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:06.053Z,1513238826.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:06.265Z,1513238826.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:06.295Z,1513238826.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:06.674Z,1513238826.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:06.744Z,1513238826.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:06.851Z,1513238826.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:07.043Z,1513238827.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:07.075Z,1513238827.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:07.253Z,1513238827.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:07.467Z,1513238827.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:07.487Z,1513238827.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:08.053Z,1513238828.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:08.850Z,1513238828.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:09.253Z,1513238829.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:11.030Z,1513238831.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:11.098Z,1513238831.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:11.197Z,1513238831.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:11.212Z,1513238831.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:11.564Z,1513238831.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:11.579Z,1513238831.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:11.977Z,1513238831.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:12.004Z,1513238832.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:12.070Z,1513238832.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:12.366Z,1513238832.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:12.397Z,1513238832.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:12.778Z,1513238832.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:12.867Z,1513238832.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:12.908Z,1513238832.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:13.177Z,1513238833.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:13.211Z,1513238833.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:13.273Z,1513238833.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:13.579Z,1513238833.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:13.603Z,1513238833.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:13.966Z,1513238833.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:13.981Z,1513238833.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:14.069Z,1513238834.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:14.363Z,1513238834.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:14.378Z,1513238834.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:14.776Z,1513238834.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:14.804Z,1513238834.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:14.865Z,1513238834.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:15.164Z,1513238835.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:15.179Z,1513238835.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:15.269Z,1513238835.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:15.579Z,1513238835.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:15.603Z,1513238835.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:15.987Z,1513238835.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:16.010Z,1513238836.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:16.066Z,1513238836.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:16.369Z,1513238836.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:16.385Z,1513238836.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:16.766Z,1513238836.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:16.780Z,1513238836.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:16.861Z,1513238836.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:17.163Z,1513238837.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:17.197Z,1513238837.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:17.265Z,1513238837.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:17.576Z,1513238837.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:17.590Z,1513238837.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:17.974Z,1513238837.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:17.988Z,1513238837.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:18.063Z,1513238838.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:18.370Z,1513238838.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:18.386Z,1513238838.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:18.777Z,1513238838.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:18.793Z,1513238838.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:18.857Z,1513238838.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:19.186Z,1513238839.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:19.216Z,1513238839.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:19.262Z,1513238839.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:19.578Z,1513238839.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:19.599Z,1513238839.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:19.967Z,1513238839.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:19.987Z,1513238839.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:20.059Z,1513238840.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:20.366Z,1513238840.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:20.401Z,1513238840.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:20.769Z,1513238840.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:20.791Z,1513238840.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:20.853Z,1513238840.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:21.171Z,1513238841.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:21.187Z,1513238841.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:21.257Z,1513238841.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:21.581Z,1513238841.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:21.651Z,1513238841.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:21.984Z,1513238841.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:22.024Z,1513238842.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:22.054Z,1513238842.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:22.412Z,1513238842.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:22.475Z,1513238842.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:22.767Z,1513238842.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:22.807Z,1513238842.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:22.850Z,1513238842.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:23.164Z,1513238843.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:23.180Z,1513238843.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:23.253Z,1513238843.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:23.565Z,1513238843.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:23.612Z,1513238843.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:23.968Z,1513238843.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:23.983Z,1513238843.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:24.049Z,1513238844.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:24.368Z,1513238844.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:24.383Z,1513238844.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:24.777Z,1513238844.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:24.847Z,1513238844.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:24.864Z,1513238844.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:25.185Z,1513238845.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:25.200Z,1513238845.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:25.281Z,1513238845.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:25.574Z,1513238845.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:25.605Z,1513238845.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:25.960Z,1513238845.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:25.994Z,1513238845.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:26.077Z,1513238846.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:26.356Z,1513238846.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:26.393Z,1513238846.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:26.766Z,1513238846.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:26.793Z,1513238846.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:26.874Z,1513238846.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:27.160Z,1513238847.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:27.202Z,1513238847.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:27.281Z,1513238847.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:27.574Z,1513238847.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:27.605Z,1513238847.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:27.973Z,1513238847.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:28.007Z,1513238848.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:28.078Z,1513238848.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:28.380Z,1513238848.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:28.408Z,1513238848.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:28.800Z,1513238848.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:28.838Z,1513238848.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:28.874Z,1513238848.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:29.171Z,1513238849.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:29.186Z,1513238849.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:29.277Z,1513238849.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:29.566Z,1513238849.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:29.580Z,1513238849.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:29.971Z,1513238849.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:29.985Z,1513238849.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:30.075Z,1513238850.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:30.372Z,1513238850.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:30.388Z,1513238850.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:30.785Z,1513238850.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:30.819Z,1513238850.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:30.869Z,1513238850.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:31.173Z,1513238851.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:31.187Z,1513238851.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:31.273Z,1513238851.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:31.576Z,1513238851.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:31.614Z,1513238851.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:32.006Z,1513238852.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:32.070Z,1513238852.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:32.079Z,1513238852.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:32.359Z,1513238852.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:32.385Z,1513238852.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:32.760Z,1513238852.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:32.788Z,1513238852.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:32.867Z,1513238852.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:33.173Z,1513238853.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:33.193Z,1513238853.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:33.269Z,1513238853.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:33.580Z,1513238853.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:33.596Z,1513238853.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:33.986Z,1513238853.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:34.002Z,1513238854.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:34.067Z,1513238854.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:34.389Z,1513238854.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:34.408Z,1513238854.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:34.766Z,1513238854.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:34.795Z,1513238854.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:34.861Z,1513238854.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:35.184Z,1513238855.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:35.207Z,1513238855.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:35.266Z,1513238855.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:35.564Z,1513238855.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:35.590Z,1513238855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:35.964Z,1513238855.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:35.991Z,1513238855.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:36.062Z,1513238856.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:36.364Z,1513238856.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:36.394Z,1513238856.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:36.768Z,1513238856.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:36.803Z,1513238856.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:36.857Z,1513238856.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:37.182Z,1513238857.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:37.196Z,1513238857.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:37.261Z,1513238857.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:37.582Z,1513238857.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:37.596Z,1513238857.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:37.957Z,1513238857.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:37.989Z,1513238857.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:38.058Z,1513238858.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:38.363Z,1513238858.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:38.390Z,1513238858.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:38.390Z,1513238858.390 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152
2017-12-14T08:07:38.390Z,1513238858.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:07:38.392Z,1513238858.392 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:38.392Z,1513238858.392 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 152
2017-12-14T08:07:38.392Z,1513238858.392 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:07:38.394Z,1513238858.394 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:38.394Z,1513238858.394 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2017-12-14T08:07:38.394Z,1513238858.394 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:07:38.449Z,1513238858.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:07:38.449Z,1513238858.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:07:38.450Z,1513238858.450 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:07:38.788Z,1513238858.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:38.855Z,1513238858.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:38.880Z,1513238858.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:07:38.880Z,1513238858.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152
2017-12-14T08:07:38.889Z,1513238858.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:07:38.889Z,1513238858.889 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 152
2017-12-14T08:07:38.890Z,1513238858.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:07:38.890Z,1513238858.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2017-12-14T08:07:39.163Z,1513238859.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:39.177Z,1513238859.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:07:39.178Z,1513238859.178 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:07:39.178Z,1513238859.178 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:07:39.178Z,1513238859.178 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:07:39.179Z,1513238859.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:07:39.179Z,1513238859.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:07:39.179Z,1513238859.179 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:07:39.180Z,1513238859.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:07:39.180Z,1513238859.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:07:39.285Z,1513238859.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:39.580Z,1513238859.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:39.610Z,1513238859.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:39.974Z,1513238859.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:40.005Z,1513238860.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:40.082Z,1513238860.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:40.390Z,1513238860.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:40.404Z,1513238860.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:40.761Z,1513238860.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:40.776Z,1513238860.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:40.877Z,1513238860.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:41.160Z,1513238861.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:41.198Z,1513238861.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:41.281Z,1513238861.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:41.570Z,1513238861.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:41.614Z,1513238861.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:41.974Z,1513238861.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:41.988Z,1513238861.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:42.078Z,1513238862.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:42.368Z,1513238862.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:42.407Z,1513238862.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:42.784Z,1513238862.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:42.803Z,1513238862.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:42.873Z,1513238862.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:43.171Z,1513238863.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:43.228Z,1513238863.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:43.277Z,1513238863.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:43.590Z,1513238863.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:43.606Z,1513238863.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:43.990Z,1513238863.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:44.050Z,1513238864.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:44.102Z,1513238864.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:44.359Z,1513238864.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:44.393Z,1513238864.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:44.828Z,1513238864.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:44.897Z,1513238864.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:44.906Z,1513238864.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:45.164Z,1513238865.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:45.197Z,1513238865.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:45.301Z,1513238865.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:45.576Z,1513238865.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:45.601Z,1513238865.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:45.987Z,1513238865.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:46.007Z,1513238866.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:46.106Z,1513238866.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:46.374Z,1513238866.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:46.403Z,1513238866.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:46.768Z,1513238866.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:46.802Z,1513238866.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:46.901Z,1513238866.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:47.163Z,1513238867.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:47.190Z,1513238867.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:47.306Z,1513238867.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:47.566Z,1513238867.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:47.597Z,1513238867.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:47.970Z,1513238867.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:48.008Z,1513238868.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:48.101Z,1513238868.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:48.367Z,1513238868.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:48.403Z,1513238868.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:48.784Z,1513238868.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:48.815Z,1513238868.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:48.898Z,1513238868.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:49.174Z,1513238869.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:49.213Z,1513238869.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:49.301Z,1513238869.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:49.571Z,1513238869.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:49.599Z,1513238869.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:49.971Z,1513238869.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:49.986Z,1513238869.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:50.099Z,1513238870.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:50.370Z,1513238870.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:50.384Z,1513238870.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:50.771Z,1513238870.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:50.786Z,1513238870.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:50.893Z,1513238870.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:51.161Z,1513238871.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:51.199Z,1513238871.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:51.297Z,1513238871.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:51.577Z,1513238871.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:51.592Z,1513238871.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:52.004Z,1513238872.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:52.043Z,1513238872.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:52.094Z,1513238872.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:52.377Z,1513238872.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:52.404Z,1513238872.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:52.763Z,1513238872.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:52.791Z,1513238872.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:52.890Z,1513238872.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:53.160Z,1513238873.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:53.207Z,1513238873.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:53.293Z,1513238873.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:53.563Z,1513238873.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:53.584Z,1513238873.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:53.971Z,1513238873.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:54.012Z,1513238874.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:54.090Z,1513238874.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:54.366Z,1513238874.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:54.381Z,1513238874.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:54.781Z,1513238874.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:54.805Z,1513238874.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:54.885Z,1513238874.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:55.179Z,1513238875.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:55.212Z,1513238875.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:55.289Z,1513238875.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:55.569Z,1513238875.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:55.591Z,1513238875.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:55.974Z,1513238875.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:55.990Z,1513238875.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:56.086Z,1513238876.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:56.369Z,1513238876.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:56.383Z,1513238876.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:56.771Z,1513238876.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:56.785Z,1513238876.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:56.881Z,1513238876.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:57.160Z,1513238877.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:57.179Z,1513238877.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:57.285Z,1513238877.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:57.572Z,1513238877.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:57.591Z,1513238877.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:57.976Z,1513238877.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:57.999Z,1513238877.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:58.090Z,1513238878.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:58.412Z,1513238878.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:58.454Z,1513238878.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:58.771Z,1513238878.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:58.786Z,1513238878.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:58.885Z,1513238878.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:59.162Z,1513238879.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:59.181Z,1513238879.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:59.289Z,1513238879.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:59.568Z,1513238879.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:59.587Z,1513238879.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:07:59.975Z,1513238879.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:07:59.990Z,1513238879.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:00.085Z,1513238880.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:00.363Z,1513238880.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:00.391Z,1513238880.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:00.775Z,1513238880.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:00.790Z,1513238880.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:00.881Z,1513238880.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:01.178Z,1513238881.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:01.199Z,1513238881.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:01.285Z,1513238881.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:01.578Z,1513238881.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:01.599Z,1513238881.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:01.975Z,1513238881.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:01.990Z,1513238881.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:02.082Z,1513238882.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:02.367Z,1513238882.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:02.390Z,1513238882.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:02.783Z,1513238882.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:02.803Z,1513238882.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:02.877Z,1513238882.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:03.173Z,1513238883.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:03.189Z,1513238883.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:03.281Z,1513238883.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:03.575Z,1513238883.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:03.602Z,1513238883.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:03.983Z,1513238883.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:04.003Z,1513238884.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:04.078Z,1513238884.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:04.381Z,1513238884.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:04.443Z,1513238884.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:04.792Z,1513238884.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:04.815Z,1513238884.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:04.873Z,1513238884.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:05.171Z,1513238885.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:05.231Z,1513238885.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:05.277Z,1513238885.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:05.575Z,1513238885.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:05.607Z,1513238885.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:05.970Z,1513238885.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:06.027Z,1513238886.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:06.073Z,1513238886.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:06.362Z,1513238886.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:06.376Z,1513238886.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:06.777Z,1513238886.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:06.871Z,1513238886.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:06.879Z,1513238886.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:06.887Z,1513238886.887 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:03:06.7Z
2017-12-14T08:08:06.887Z,1513238886.887 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T08:08:06.887Z,1513238886.887 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T08:08:07.180Z,1513238887.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:07.195Z,1513238887.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:07.277Z,1513238887.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:08.003Z,1513238888.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:08.040Z,1513238888.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:08.074Z,1513238888.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:08.873Z,1513238888.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:09.277Z,1513238889.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:10.074Z,1513238890.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:10.871Z,1513238890.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:11.199Z,1513238891.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:11.254Z,1513238891.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:11.277Z,1513238891.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:11.348Z,1513238891.348 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0176.lzma
2017-12-14T08:08:11.398Z,1513238891.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:11.443Z,1513238891.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:11.757Z,1513238891.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:11.792Z,1513238891.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:12.073Z,1513238892.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:12.115Z,1513238892.115 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0176.lzma.bak
2017-12-14T08:08:12.116Z,1513238892.116 [DataOverHttps](INFO): SBD MOMSN=5438323
2017-12-14T08:08:12.176Z,1513238892.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:12.191Z,1513238892.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:12.870Z,1513238892.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:13.273Z,1513238893.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:13.574Z,1513238893.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:13.589Z,1513238893.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:13.692Z,1513238893.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:13.738Z,1513238893.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:14.073Z,1513238894.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:14.872Z,1513238894.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:15.277Z,1513238895.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:16.074Z,1513238896.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:16.872Z,1513238896.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:17.131Z,1513238897.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:17.191Z,1513238897.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:17.277Z,1513238897.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:17.297Z,1513238897.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:17.312Z,1513238897.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:17.657Z,1513238897.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:17.692Z,1513238897.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:18.061Z,1513238898.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:18.081Z,1513238898.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:18.097Z,1513238898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:18.458Z,1513238898.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:18.489Z,1513238898.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:18.846Z,1513238898.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:18.878Z,1513238898.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:18.890Z,1513238898.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:19.281Z,1513238899.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:20.078Z,1513238900.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:20.876Z,1513238900.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:21.281Z,1513238901.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:22.078Z,1513238902.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:22.256Z,1513238902.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:22.271Z,1513238902.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:22.357Z,1513238902.357 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0177.lzma
2017-12-14T08:08:22.384Z,1513238902.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:22.407Z,1513238902.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:22.766Z,1513238902.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:22.795Z,1513238902.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:22.874Z,1513238902.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:23.123Z,1513238903.123 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0177.lzma.bak
2017-12-14T08:08:23.123Z,1513238903.123 [DataOverHttps](INFO): SBD MOMSN=5438327
2017-12-14T08:08:23.192Z,1513238903.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:23.208Z,1513238903.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:23.281Z,1513238903.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:24.079Z,1513238904.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:24.451Z,1513238904.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:24.506Z,1513238904.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:24.532Z,1513238904.532 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T08:08:24.532Z,1513238904.532 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T08:08:24.532Z,1513238904.532 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T08:08:24.615Z,1513238904.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:24.659Z,1513238904.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:24.873Z,1513238904.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:25.277Z,1513238905.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:26.074Z,1513238906.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:26.869Z,1513238906.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:27.273Z,1513238907.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.031Z,1513238908.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.070Z,1513238908.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.109Z,1513238908.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:28.200Z,1513238908.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.239Z,1513238908.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:28.583Z,1513238908.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.611Z,1513238908.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:28.865Z,1513238908.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:28.990Z,1513238908.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:29.039Z,1513238909.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:29.269Z,1513238909.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:29.371Z,1513238909.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:29.388Z,1513238909.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:29.773Z,1513238909.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:29.828Z,1513238909.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:30.067Z,1513238910.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:30.155Z,1513238910.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:30.191Z,1513238910.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:30.573Z,1513238910.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:30.640Z,1513238910.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:30.861Z,1513238910.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:30.979Z,1513238910.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:30.994Z,1513238910.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:31.265Z,1513238911.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:31.379Z,1513238911.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:31.394Z,1513238911.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:31.766Z,1513238911.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:31.799Z,1513238911.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:32.062Z,1513238912.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:32.159Z,1513238912.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:32.187Z,1513238912.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:32.607Z,1513238912.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:32.651Z,1513238912.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:32.857Z,1513238912.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:32.972Z,1513238912.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:33.007Z,1513238913.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:33.261Z,1513238913.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:33.365Z,1513238913.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:33.379Z,1513238913.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:33.798Z,1513238913.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:33.825Z,1513238913.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:34.057Z,1513238914.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:34.170Z,1513238914.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:34.184Z,1513238914.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:34.566Z,1513238914.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:34.580Z,1513238914.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:34.855Z,1513238914.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:34.964Z,1513238914.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:34.979Z,1513238914.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:35.269Z,1513238915.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:35.364Z,1513238915.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:35.380Z,1513238915.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:35.762Z,1513238915.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:35.781Z,1513238915.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:36.066Z,1513238916.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:36.164Z,1513238916.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:36.179Z,1513238916.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:36.560Z,1513238916.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:36.579Z,1513238916.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:36.863Z,1513238916.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:37.011Z,1513238917.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:37.034Z,1513238917.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:37.273Z,1513238917.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:37.378Z,1513238917.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:37.399Z,1513238917.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:37.766Z,1513238917.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:37.798Z,1513238917.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:38.070Z,1513238918.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:38.165Z,1513238918.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:38.185Z,1513238918.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:38.577Z,1513238918.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:38.599Z,1513238918.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:38.865Z,1513238918.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:38.964Z,1513238918.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:39.021Z,1513238919.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:39.270Z,1513238919.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:39.362Z,1513238919.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:39.377Z,1513238919.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:39.775Z,1513238919.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:39.795Z,1513238919.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:40.065Z,1513238920.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:40.179Z,1513238920.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:40.199Z,1513238920.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:40.577Z,1513238920.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:40.593Z,1513238920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:40.861Z,1513238920.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:40.959Z,1513238920.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:40.975Z,1513238920.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:41.355Z,1513238921.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:41.386Z,1513238921.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:41.518Z,1513238921.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:41.756Z,1513238921.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:41.783Z,1513238921.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:42.160Z,1513238922.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:42.198Z,1513238922.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:42.313Z,1513238922.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:42.578Z,1513238922.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:42.605Z,1513238922.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:42.937Z,1513238922.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:42.991Z,1513238922.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:43.030Z,1513238923.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:43.369Z,1513238923.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:43.394Z,1513238923.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:43.733Z,1513238923.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:43.783Z,1513238923.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:43.798Z,1513238923.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:44.221Z,1513238924.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:44.267Z,1513238924.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:44.532Z,1513238924.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:44.585Z,1513238924.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:44.639Z,1513238924.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:44.937Z,1513238924.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:44.964Z,1513238924.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:44.987Z,1513238924.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:45.364Z,1513238925.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:45.385Z,1513238925.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:45.733Z,1513238925.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:45.781Z,1513238925.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:45.796Z,1513238925.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:46.178Z,1513238926.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:46.193Z,1513238926.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:46.531Z,1513238926.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:46.621Z,1513238926.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:46.644Z,1513238926.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:46.955Z,1513238926.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:46.987Z,1513238926.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:46.997Z,1513238926.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:47.355Z,1513238927.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:47.423Z,1513238927.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:47.755Z,1513238927.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:47.787Z,1513238927.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:47.794Z,1513238927.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:48.160Z,1513238928.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:48.198Z,1513238928.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:48.559Z,1513238928.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:48.589Z,1513238928.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:48.601Z,1513238928.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:48.965Z,1513238928.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:49.001Z,1513238929.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:49.258Z,1513238929.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:49.373Z,1513238929.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:49.396Z,1513238929.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:49.774Z,1513238929.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:49.803Z,1513238929.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:50.054Z,1513238930.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:50.166Z,1513238930.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:50.199Z,1513238930.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:50.598Z,1513238930.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:50.650Z,1513238930.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:50.852Z,1513238930.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:50.956Z,1513238930.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:50.976Z,1513238930.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:51.261Z,1513238931.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:51.366Z,1513238931.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:51.408Z,1513238931.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:51.773Z,1513238931.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:51.795Z,1513238931.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:52.057Z,1513238932.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:52.178Z,1513238932.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:52.227Z,1513238932.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:52.577Z,1513238932.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:52.592Z,1513238932.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:52.853Z,1513238932.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:52.966Z,1513238932.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:53.023Z,1513238933.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:53.363Z,1513238933.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:53.380Z,1513238933.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:53.650Z,1513238933.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:53.774Z,1513238933.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:53.831Z,1513238933.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:54.164Z,1513238934.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:54.183Z,1513238934.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:54.445Z,1513238934.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:54.592Z,1513238934.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:54.620Z,1513238934.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:54.977Z,1513238934.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:54.992Z,1513238934.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:55.241Z,1513238935.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:55.378Z,1513238935.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:55.393Z,1513238935.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:55.771Z,1513238935.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:55.797Z,1513238935.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:56.039Z,1513238936.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:56.164Z,1513238936.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:56.179Z,1513238936.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:56.570Z,1513238936.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:56.585Z,1513238936.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:56.833Z,1513238936.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:56.983Z,1513238936.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:57.015Z,1513238937.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:57.362Z,1513238937.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:57.376Z,1513238937.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:57.629Z,1513238937.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:57.766Z,1513238937.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:57.787Z,1513238937.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:58.179Z,1513238938.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:58.259Z,1513238938.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:58.426Z,1513238938.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:58.573Z,1513238938.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:58.588Z,1513238938.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:58.965Z,1513238938.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:58.979Z,1513238938.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:59.221Z,1513238939.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:59.360Z,1513238939.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:59.380Z,1513238939.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:08:59.766Z,1513238939.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:08:59.780Z,1513238939.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:00.018Z,1513238940.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:00.190Z,1513238940.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:00.238Z,1513238940.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:00.592Z,1513238940.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:00.619Z,1513238940.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:00.813Z,1513238940.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:00.981Z,1513238940.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:01.016Z,1513238941.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:01.369Z,1513238941.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:01.409Z,1513238941.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:01.609Z,1513238941.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:01.767Z,1513238941.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:01.787Z,1513238941.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:02.163Z,1513238942.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:02.179Z,1513238942.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:02.405Z,1513238942.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:02.555Z,1513238942.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:02.647Z,1513238942.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:02.956Z,1513238942.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:02.982Z,1513238942.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:03.202Z,1513238943.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:03.408Z,1513238943.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:03.444Z,1513238943.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:03.772Z,1513238943.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:03.933Z,1513238943.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:03.997Z,1513238943.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:04.183Z,1513238944.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:04.199Z,1513238944.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:04.578Z,1513238944.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:04.599Z,1513238944.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:04.794Z,1513238944.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:04.974Z,1513238944.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:04.991Z,1513238944.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:05.349Z,1513238945.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:05.387Z,1513238945.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:05.589Z,1513238945.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:05.783Z,1513238945.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:05.883Z,1513238945.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:06.159Z,1513238946.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:06.186Z,1513238946.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:06.385Z,1513238946.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:06.629Z,1513238946.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:06.652Z,1513238946.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:06.975Z,1513238946.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:06.997Z,1513238946.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:07.182Z,1513238947.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:07.379Z,1513238947.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:07.395Z,1513238947.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:07.757Z,1513238947.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:07.797Z,1513238947.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:07.978Z,1513238947.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.162Z,1513238948.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.192Z,1513238948.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:08.381Z,1513238948.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.582Z,1513238948.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.620Z,1513238948.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:08.786Z,1513238948.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.962Z,1513238948.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:08.989Z,1513238948.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:09.190Z,1513238949.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:09.359Z,1513238949.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:09.375Z,1513238949.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:09.594Z,1513238949.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:09.774Z,1513238949.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:09.843Z,1513238949.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:09.997Z,1513238949.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.177Z,1513238950.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.204Z,1513238950.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:10.402Z,1513238950.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.596Z,1513238950.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.612Z,1513238950.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:10.626Z,1513238950.626 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:09:10.805Z,1513238950.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.965Z,1513238950.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:10.981Z,1513238950.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:11.210Z,1513238951.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:11.368Z,1513238951.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:11.383Z,1513238951.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:11.614Z,1513238951.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:11.760Z,1513238951.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:11.787Z,1513238951.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:12.018Z,1513238952.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:12.164Z,1513238952.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:12.184Z,1513238952.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:12.569Z,1513238952.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:12.612Z,1513238952.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:12.814Z,1513238952.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:12.989Z,1513238952.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:13.036Z,1513238953.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:13.217Z,1513238953.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:13.374Z,1513238953.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:13.462Z,1513238953.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:13.779Z,1513238953.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:13.794Z,1513238953.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:14.014Z,1513238954.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:14.154Z,1513238954.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:14.203Z,1513238954.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:14.609Z,1513238954.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:14.644Z,1513238954.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:14.809Z,1513238954.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:14.964Z,1513238954.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:15.018Z,1513238955.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:15.213Z,1513238955.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:15.363Z,1513238955.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:15.399Z,1513238955.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:15.773Z,1513238955.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:15.804Z,1513238955.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:16.009Z,1513238956.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:16.180Z,1513238956.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:16.219Z,1513238956.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:16.566Z,1513238956.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:16.587Z,1513238956.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:16.805Z,1513238956.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:16.970Z,1513238956.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:16.988Z,1513238956.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:17.301Z,1513238957.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:17.369Z,1513238957.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:17.384Z,1513238957.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:17.757Z,1513238957.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:17.786Z,1513238957.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:18.098Z,1513238958.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:18.170Z,1513238958.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:18.184Z,1513238958.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:18.567Z,1513238958.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:18.585Z,1513238958.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:18.896Z,1513238958.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:18.975Z,1513238958.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:19.011Z,1513238959.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:19.302Z,1513238959.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:19.392Z,1513238959.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:19.424Z,1513238959.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:19.771Z,1513238959.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:19.791Z,1513238959.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:20.098Z,1513238960.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:20.167Z,1513238960.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:20.181Z,1513238960.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:20.574Z,1513238960.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:20.595Z,1513238960.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:20.893Z,1513238960.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:20.960Z,1513238960.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:20.991Z,1513238960.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:21.297Z,1513238961.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:21.362Z,1513238961.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:21.394Z,1513238961.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:21.777Z,1513238961.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:21.799Z,1513238961.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:22.094Z,1513238962.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:22.177Z,1513238962.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:22.192Z,1513238962.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:22.615Z,1513238962.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:22.641Z,1513238962.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:22.889Z,1513238962.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:22.973Z,1513238962.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:22.988Z,1513238962.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:23.293Z,1513238963.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:23.355Z,1513238963.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:23.407Z,1513238963.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:23.758Z,1513238963.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:23.785Z,1513238963.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:24.090Z,1513238964.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:24.156Z,1513238964.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:24.187Z,1513238964.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:24.564Z,1513238964.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:24.602Z,1513238964.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:24.885Z,1513238964.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:24.972Z,1513238964.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:24.987Z,1513238964.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:25.289Z,1513238965.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:26.086Z,1513238966.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:26.881Z,1513238966.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:27.285Z,1513238967.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:28.081Z,1513238968.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:28.690Z,1513238968.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:28.705Z,1513238968.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:28.814Z,1513238968.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:28.840Z,1513238968.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:28.877Z,1513238968.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:29.197Z,1513238969.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:29.219Z,1513238969.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:29.281Z,1513238969.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:29.592Z,1513238969.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:29.623Z,1513238969.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:29.998Z,1513238969.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:30.033Z,1513238970.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:30.078Z,1513238970.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:30.394Z,1513238970.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:30.417Z,1513238970.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:30.802Z,1513238970.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:30.875Z,1513238970.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:30.885Z,1513238970.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:31.207Z,1513238971.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:31.230Z,1513238971.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:31.297Z,1513238971.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:31.615Z,1513238971.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:31.635Z,1513238971.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:31.000Z,1513238972.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:32.017Z,1513238972.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:32.094Z,1513238972.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:32.387Z,1513238972.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:32.412Z,1513238972.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:32.787Z,1513238972.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:32.883Z,1513238972.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:32.890Z,1513238972.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:33.208Z,1513238973.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:33.227Z,1513238973.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:33.293Z,1513238973.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:33.650Z,1513238973.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:33.746Z,1513238973.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:34.015Z,1513238974.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:34.036Z,1513238974.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:34.090Z,1513238974.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:34.398Z,1513238974.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:34.425Z,1513238974.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:34.791Z,1513238974.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:34.807Z,1513238974.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:34.885Z,1513238974.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:35.226Z,1513238975.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:35.287Z,1513238975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:35.289Z,1513238975.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:35.586Z,1513238975.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:35.648Z,1513238975.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:35.996Z,1513238975.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:36.011Z,1513238976.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:36.086Z,1513238976.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:36.392Z,1513238976.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:36.407Z,1513238976.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:36.810Z,1513238976.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:36.863Z,1513238976.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:36.881Z,1513238976.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:37.206Z,1513238977.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:37.233Z,1513238977.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:37.285Z,1513238977.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:37.610Z,1513238977.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:37.659Z,1513238977.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:37.997Z,1513238977.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:38.011Z,1513238978.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:38.081Z,1513238978.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:38.393Z,1513238978.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:38.432Z,1513238978.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:38.817Z,1513238978.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:38.878Z,1513238978.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:38.922Z,1513238978.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:39.190Z,1513238979.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:39.218Z,1513238979.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:39.281Z,1513238979.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:39.606Z,1513238979.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:39.622Z,1513238979.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:40.007Z,1513238980.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:40.031Z,1513238980.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:40.078Z,1513238980.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:40.397Z,1513238980.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:40.430Z,1513238980.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:40.794Z,1513238980.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:40.821Z,1513238980.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:40.874Z,1513238980.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:41.199Z,1513238981.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:41.227Z,1513238981.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:41.277Z,1513238981.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:41.599Z,1513238981.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:41.615Z,1513238981.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:41.987Z,1513238981.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:42.012Z,1513238982.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:42.074Z,1513238982.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:42.386Z,1513238982.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:42.418Z,1513238982.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:42.811Z,1513238982.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:42.826Z,1513238982.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:42.869Z,1513238982.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:43.211Z,1513238983.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:43.231Z,1513238983.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:43.273Z,1513238983.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:43.608Z,1513238983.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:43.623Z,1513238983.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:43.000Z,1513238984.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:44.015Z,1513238984.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:44.070Z,1513238984.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:44.387Z,1513238984.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:44.424Z,1513238984.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:44.787Z,1513238984.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:44.867Z,1513238984.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:44.911Z,1513238984.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:45.205Z,1513238985.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:45.220Z,1513238985.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:45.289Z,1513238985.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:45.600Z,1513238985.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:45.620Z,1513238985.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:46.005Z,1513238986.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:46.051Z,1513238986.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:46.086Z,1513238986.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:46.406Z,1513238986.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:46.421Z,1513238986.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:46.791Z,1513238986.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:46.878Z,1513238986.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:46.881Z,1513238986.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:47.188Z,1513238987.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:47.218Z,1513238987.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:47.285Z,1513238987.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:47.595Z,1513238987.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:47.622Z,1513238987.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:47.992Z,1513238987.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:48.027Z,1513238988.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:48.082Z,1513238988.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:48.387Z,1513238988.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:48.427Z,1513238988.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:48.798Z,1513238988.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:48.831Z,1513238988.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:48.877Z,1513238988.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:49.220Z,1513238989.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:49.234Z,1513238989.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:49.281Z,1513238989.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:49.600Z,1513238989.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:49.627Z,1513238989.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:49.984Z,1513238989.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:49.999Z,1513238989.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:50.077Z,1513238990.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:50.381Z,1513238990.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:50.396Z,1513238990.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:50.797Z,1513238990.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:50.828Z,1513238990.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:50.873Z,1513238990.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:51.222Z,1513238991.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:51.249Z,1513238991.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:51.277Z,1513238991.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:51.598Z,1513238991.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:51.622Z,1513238991.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:52.009Z,1513238992.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:52.031Z,1513238992.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:52.074Z,1513238992.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:52.409Z,1513238992.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:52.432Z,1513238992.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:52.792Z,1513238992.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:52.815Z,1513238992.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:52.869Z,1513238992.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:53.192Z,1513238993.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:53.219Z,1513238993.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:53.273Z,1513238993.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:53.600Z,1513238993.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:53.615Z,1513238993.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:54.003Z,1513238994.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:54.020Z,1513238994.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:54.070Z,1513238994.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:54.423Z,1513238994.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:54.460Z,1513238994.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:54.806Z,1513238994.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:54.821Z,1513238994.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:54.866Z,1513238994.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:55.206Z,1513238995.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:55.222Z,1513238995.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:55.269Z,1513238995.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:55.614Z,1513238995.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:55.629Z,1513238995.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:55.992Z,1513238995.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:56.023Z,1513238996.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:56.066Z,1513238996.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:56.387Z,1513238996.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:56.419Z,1513238996.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:56.787Z,1513238996.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:56.818Z,1513238996.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:56.861Z,1513238996.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:57.195Z,1513238997.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:57.222Z,1513238997.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:57.265Z,1513238997.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:57.610Z,1513238997.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:57.629Z,1513238997.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:58.011Z,1513238998.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:58.031Z,1513238998.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:58.062Z,1513238998.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:58.397Z,1513238998.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:58.494Z,1513238998.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:58.794Z,1513238998.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:58.831Z,1513238998.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:58.859Z,1513238998.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:59.190Z,1513238999.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:59.243Z,1513238999.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:59.285Z,1513238999.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:59.597Z,1513238999.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:09:59.619Z,1513238999.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:09:59.998Z,1513238999.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:00.050Z,1513239000.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:00.081Z,1513239000.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:00.401Z,1513239000.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:00.415Z,1513239000.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:00.877Z,1513239000.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:00.878Z,1513239000.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:00.939Z,1513239000.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:01.209Z,1513239001.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:01.225Z,1513239001.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:01.289Z,1513239001.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:01.600Z,1513239001.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:01.628Z,1513239001.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:01.992Z,1513239001.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:02.018Z,1513239002.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:02.085Z,1513239002.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:02.385Z,1513239002.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:02.408Z,1513239002.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:02.792Z,1513239002.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:02.823Z,1513239002.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:02.881Z,1513239002.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:03.187Z,1513239003.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:03.215Z,1513239003.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:03.285Z,1513239003.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:03.609Z,1513239003.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:03.625Z,1513239003.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:04.001Z,1513239004.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:04.025Z,1513239004.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:04.082Z,1513239004.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:04.408Z,1513239004.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:04.436Z,1513239004.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:04.787Z,1513239004.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:04.819Z,1513239004.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:04.877Z,1513239004.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:05.206Z,1513239005.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:05.221Z,1513239005.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:05.281Z,1513239005.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:05.586Z,1513239005.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:05.619Z,1513239005.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:05.991Z,1513239005.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:06.018Z,1513239006.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:06.078Z,1513239006.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:06.386Z,1513239006.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:06.412Z,1513239006.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:06.810Z,1513239006.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:06.826Z,1513239006.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:06.873Z,1513239006.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:07.225Z,1513239007.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:07.260Z,1513239007.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:07.278Z,1513239007.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:07.625Z,1513239007.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:07.696Z,1513239007.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:07.989Z,1513239007.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:08.004Z,1513239008.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:08.073Z,1513239008.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:08.388Z,1513239008.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:08.433Z,1513239008.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:08.797Z,1513239008.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:08.827Z,1513239008.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:08.869Z,1513239008.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:09.194Z,1513239009.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:09.208Z,1513239009.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:09.273Z,1513239009.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:09.629Z,1513239009.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:09.645Z,1513239009.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:10.007Z,1513239010.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:10.039Z,1513239010.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:10.070Z,1513239010.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:10.430Z,1513239010.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:10.451Z,1513239010.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:10.794Z,1513239010.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:10.815Z,1513239010.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:10.865Z,1513239010.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:11.195Z,1513239011.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:11.211Z,1513239011.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:11.269Z,1513239011.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:11.603Z,1513239011.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:11.623Z,1513239011.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:11.999Z,1513239011.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:12.015Z,1513239012.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:12.066Z,1513239012.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:12.396Z,1513239012.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:12.411Z,1513239012.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:12.806Z,1513239012.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:12.863Z,1513239012.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:12.890Z,1513239012.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:13.213Z,1513239013.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:13.230Z,1513239013.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:13.289Z,1513239013.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:13.600Z,1513239013.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:13.627Z,1513239013.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:13.987Z,1513239013.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:14.022Z,1513239014.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:14.086Z,1513239014.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:14.381Z,1513239014.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:14.396Z,1513239014.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:14.796Z,1513239014.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:14.881Z,1513239014.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:14.887Z,1513239014.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:15.192Z,1513239015.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:15.208Z,1513239015.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:15.285Z,1513239015.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:15.606Z,1513239015.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:15.638Z,1513239015.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:16.005Z,1513239016.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:16.041Z,1513239016.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:16.082Z,1513239016.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:16.410Z,1513239016.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:16.435Z,1513239016.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:16.788Z,1513239016.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:16.831Z,1513239016.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:16.878Z,1513239016.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:17.206Z,1513239017.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:17.221Z,1513239017.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:17.281Z,1513239017.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:17.587Z,1513239017.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:17.616Z,1513239017.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:17.992Z,1513239017.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:18.018Z,1513239018.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:18.078Z,1513239018.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:18.386Z,1513239018.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:18.415Z,1513239018.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:18.798Z,1513239018.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:18.831Z,1513239018.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:18.874Z,1513239018.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:19.201Z,1513239019.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:19.239Z,1513239019.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:19.277Z,1513239019.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:19.605Z,1513239019.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:19.635Z,1513239019.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:19.988Z,1513239019.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:20.074Z,1513239020.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:20.099Z,1513239020.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:20.394Z,1513239020.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:20.449Z,1513239020.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:20.787Z,1513239020.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:20.819Z,1513239020.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:20.869Z,1513239020.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:21.205Z,1513239021.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:21.258Z,1513239021.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:21.273Z,1513239021.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:21.610Z,1513239021.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:21.625Z,1513239021.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:22.010Z,1513239022.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:22.056Z,1513239022.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:22.070Z,1513239022.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:22.406Z,1513239022.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:22.422Z,1513239022.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:22.798Z,1513239022.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:22.824Z,1513239022.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:22.865Z,1513239022.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:23.194Z,1513239023.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:23.256Z,1513239023.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:23.269Z,1513239023.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:23.599Z,1513239023.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:23.632Z,1513239023.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:23.994Z,1513239023.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:24.009Z,1513239024.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:24.066Z,1513239024.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:24.392Z,1513239024.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:24.407Z,1513239024.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:24.798Z,1513239024.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:24.812Z,1513239024.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:24.861Z,1513239024.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:25.205Z,1513239025.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:25.220Z,1513239025.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:25.265Z,1513239025.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:26.062Z,1513239026.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:26.859Z,1513239026.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:27.285Z,1513239027.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:28.081Z,1513239028.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:28.621Z,1513239028.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:28.647Z,1513239028.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:28.746Z,1513239028.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:28.774Z,1513239028.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:28.878Z,1513239028.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:29.115Z,1513239029.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:29.169Z,1513239029.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:29.281Z,1513239029.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:29.510Z,1513239029.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:29.526Z,1513239029.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:29.895Z,1513239029.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:29.921Z,1513239029.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:30.078Z,1513239030.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:30.294Z,1513239030.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:30.344Z,1513239030.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:30.714Z,1513239030.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:30.729Z,1513239030.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:30.925Z,1513239030.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:31.112Z,1513239031.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:31.148Z,1513239031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:31.329Z,1513239031.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:31.518Z,1513239031.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:31.533Z,1513239031.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:31.895Z,1513239031.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:31.971Z,1513239031.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:32.126Z,1513239032.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:32.295Z,1513239032.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:32.335Z,1513239032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:32.717Z,1513239032.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:32.778Z,1513239032.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:32.917Z,1513239032.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:33.112Z,1513239033.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:33.127Z,1513239033.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:33.518Z,1513239033.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:33.540Z,1513239033.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:33.714Z,1513239033.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:33.918Z,1513239033.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:33.933Z,1513239033.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:34.313Z,1513239034.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:34.336Z,1513239034.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:34.511Z,1513239034.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:34.695Z,1513239034.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:34.720Z,1513239034.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:34.921Z,1513239034.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:35.111Z,1513239035.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:35.138Z,1513239035.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:35.509Z,1513239035.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:35.524Z,1513239035.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:35.718Z,1513239035.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:35.923Z,1513239035.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:35.962Z,1513239035.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:36.294Z,1513239036.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:36.331Z,1513239036.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:36.515Z,1513239036.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:36.714Z,1513239036.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:36.736Z,1513239036.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:36.925Z,1513239036.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:37.119Z,1513239037.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:37.139Z,1513239037.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:37.516Z,1513239037.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:37.539Z,1513239037.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:37.722Z,1513239037.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:37.899Z,1513239037.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:37.947Z,1513239037.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:38.296Z,1513239038.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:38.335Z,1513239038.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:38.519Z,1513239038.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:38.696Z,1513239038.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:38.730Z,1513239038.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:38.977Z,1513239038.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:39.117Z,1513239039.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:39.181Z,1513239039.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:39.183Z,1513239039.183 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:39.183Z,1513239039.183 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 153
2017-12-14T08:10:39.183Z,1513239039.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:10:39.185Z,1513239039.185 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:39.185Z,1513239039.185 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2017-12-14T08:10:39.185Z,1513239039.185 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:10:39.201Z,1513239039.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:10:39.201Z,1513239039.201 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:10:39.506Z,1513239039.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:39.536Z,1513239039.536 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:39.536Z,1513239039.536 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153
2017-12-14T08:10:39.536Z,1513239039.536 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:10:39.555Z,1513239039.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:10:39.555Z,1513239039.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:10:39.555Z,1513239039.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 153
2017-12-14T08:10:39.556Z,1513239039.556 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:10:39.556Z,1513239039.556 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2017-12-14T08:10:39.774Z,1513239039.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:39.911Z,1513239039.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:39.943Z,1513239039.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:10:39.943Z,1513239039.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:10:39.944Z,1513239039.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:10:39.944Z,1513239039.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:10:39.944Z,1513239039.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:10:39.945Z,1513239039.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:10:39.956Z,1513239039.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:10:39.956Z,1513239039.956 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153
2017-12-14T08:10:40.315Z,1513239040.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:40.338Z,1513239040.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:10:40.338Z,1513239040.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:10:40.339Z,1513239040.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:10:40.571Z,1513239040.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:40.699Z,1513239040.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:40.715Z,1513239040.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:41.104Z,1513239041.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:41.120Z,1513239041.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:41.249Z,1513239041.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:41.503Z,1513239041.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:41.518Z,1513239041.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:41.902Z,1513239041.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:41.922Z,1513239041.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:42.045Z,1513239042.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:42.305Z,1513239042.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:42.423Z,1513239042.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:42.714Z,1513239042.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:42.733Z,1513239042.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:42.843Z,1513239042.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:43.115Z,1513239043.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:43.175Z,1513239043.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:43.256Z,1513239043.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:43.510Z,1513239043.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:43.532Z,1513239043.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:43.895Z,1513239043.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:43.941Z,1513239043.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:44.049Z,1513239044.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:44.298Z,1513239044.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:44.325Z,1513239044.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:44.696Z,1513239044.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:44.733Z,1513239044.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:44.845Z,1513239044.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:45.103Z,1513239045.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:45.118Z,1513239045.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:45.249Z,1513239045.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:45.510Z,1513239045.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:45.524Z,1513239045.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:45.921Z,1513239045.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:45.944Z,1513239045.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:46.046Z,1513239046.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:46.311Z,1513239046.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:46.338Z,1513239046.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:46.715Z,1513239046.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:46.735Z,1513239046.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:46.842Z,1513239046.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:47.116Z,1513239047.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:47.131Z,1513239047.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:47.245Z,1513239047.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:47.506Z,1513239047.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:47.521Z,1513239047.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:47.903Z,1513239047.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:47.923Z,1513239047.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:48.042Z,1513239048.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:48.306Z,1513239048.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:48.327Z,1513239048.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:48.734Z,1513239048.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:48.785Z,1513239048.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:48.837Z,1513239048.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:49.122Z,1513239049.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:49.144Z,1513239049.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:49.241Z,1513239049.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:49.507Z,1513239049.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:49.548Z,1513239049.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:49.895Z,1513239049.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:49.910Z,1513239049.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:50.037Z,1513239050.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:50.301Z,1513239050.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:50.316Z,1513239050.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:50.706Z,1513239050.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:50.721Z,1513239050.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:50.833Z,1513239050.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:51.107Z,1513239051.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:51.121Z,1513239051.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:51.237Z,1513239051.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:51.518Z,1513239051.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:51.532Z,1513239051.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:51.939Z,1513239051.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:51.999Z,1513239051.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:52.042Z,1513239052.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:52.308Z,1513239052.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:52.324Z,1513239052.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:52.703Z,1513239052.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:52.723Z,1513239052.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:52.837Z,1513239052.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:53.108Z,1513239053.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:53.123Z,1513239053.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:53.242Z,1513239053.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:53.505Z,1513239053.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:53.520Z,1513239053.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:53.903Z,1513239053.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:53.923Z,1513239053.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:54.040Z,1513239054.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:54.302Z,1513239054.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:54.318Z,1513239054.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:54.709Z,1513239054.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:54.723Z,1513239054.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:54.835Z,1513239054.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:55.126Z,1513239055.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:55.170Z,1513239055.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:55.262Z,1513239055.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:55.513Z,1513239055.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:55.540Z,1513239055.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:55.888Z,1513239055.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:55.903Z,1513239055.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:56.059Z,1513239056.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:56.297Z,1513239056.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:56.324Z,1513239056.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:56.700Z,1513239056.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:56.732Z,1513239056.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:56.855Z,1513239056.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:57.100Z,1513239057.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:57.144Z,1513239057.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:57.265Z,1513239057.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:57.502Z,1513239057.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:57.532Z,1513239057.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:57.917Z,1513239057.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:57.948Z,1513239057.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:58.062Z,1513239058.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:58.366Z,1513239058.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:58.403Z,1513239058.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:58.694Z,1513239058.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:58.728Z,1513239058.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:58.857Z,1513239058.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:59.094Z,1513239059.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:59.139Z,1513239059.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:59.261Z,1513239059.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:59.498Z,1513239059.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:59.530Z,1513239059.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:10:59.900Z,1513239059.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:10:59.960Z,1513239059.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:00.058Z,1513239060.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:00.296Z,1513239060.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:00.311Z,1513239060.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:00.724Z,1513239060.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:00.747Z,1513239060.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:00.853Z,1513239060.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:01.111Z,1513239061.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:01.160Z,1513239061.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:01.257Z,1513239061.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:01.514Z,1513239061.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:01.555Z,1513239061.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:01.905Z,1513239061.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:01.919Z,1513239061.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:02.053Z,1513239062.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:02.300Z,1513239062.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:02.319Z,1513239062.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:02.703Z,1513239062.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:02.723Z,1513239062.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:02.849Z,1513239062.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:03.108Z,1513239063.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:03.122Z,1513239063.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:03.253Z,1513239063.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:03.509Z,1513239063.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:03.531Z,1513239063.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:03.914Z,1513239063.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:03.995Z,1513239063.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:04.050Z,1513239064.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:04.313Z,1513239064.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:04.328Z,1513239064.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:04.694Z,1513239064.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:04.783Z,1513239064.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:04.846Z,1513239064.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:05.095Z,1513239065.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:05.120Z,1513239065.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:05.249Z,1513239065.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:05.495Z,1513239065.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:05.548Z,1513239065.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:05.896Z,1513239065.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:05.926Z,1513239065.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:06.046Z,1513239066.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:06.299Z,1513239066.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:06.335Z,1513239066.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:06.717Z,1513239066.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:06.747Z,1513239066.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:06.842Z,1513239066.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:07.117Z,1513239067.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:07.151Z,1513239067.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:07.245Z,1513239067.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:07.517Z,1513239067.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:07.567Z,1513239067.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:07.903Z,1513239067.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:08.003Z,1513239068.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:08.042Z,1513239068.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:08.295Z,1513239068.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:08.316Z,1513239068.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:08.700Z,1513239068.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:08.719Z,1513239068.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:08.839Z,1513239068.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:09.105Z,1513239069.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:09.119Z,1513239069.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:09.269Z,1513239069.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:09.506Z,1513239069.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:09.520Z,1513239069.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:09.913Z,1513239069.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:09.928Z,1513239069.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:10.066Z,1513239070.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:10.310Z,1513239070.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:10.326Z,1513239070.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:10.695Z,1513239070.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:10.715Z,1513239070.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:10.863Z,1513239070.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:11.137Z,1513239071.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:11.180Z,1513239071.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:11.270Z,1513239071.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:11.495Z,1513239071.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:11.527Z,1513239071.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:11.907Z,1513239071.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:11.965Z,1513239071.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:12.066Z,1513239072.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:12.299Z,1513239072.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:12.326Z,1513239072.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:12.716Z,1513239072.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:12.730Z,1513239072.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:12.861Z,1513239072.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:13.115Z,1513239073.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:13.145Z,1513239073.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:13.265Z,1513239073.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:13.518Z,1513239073.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:13.541Z,1513239073.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:13.898Z,1513239073.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:13.949Z,1513239073.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:14.062Z,1513239074.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:14.324Z,1513239074.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:14.374Z,1513239074.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:14.730Z,1513239074.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:14.753Z,1513239074.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:14.857Z,1513239074.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:15.095Z,1513239075.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:15.140Z,1513239075.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:15.263Z,1513239075.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:15.510Z,1513239075.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:15.548Z,1513239075.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:15.922Z,1513239075.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:15.938Z,1513239075.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:16.058Z,1513239076.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:16.305Z,1513239076.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:16.332Z,1513239076.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:16.695Z,1513239076.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:16.739Z,1513239076.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:16.853Z,1513239076.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:17.095Z,1513239077.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:17.110Z,1513239077.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:17.257Z,1513239077.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:17.499Z,1513239077.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:17.514Z,1513239077.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:17.906Z,1513239077.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:17.920Z,1513239077.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:18.054Z,1513239078.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:18.303Z,1513239078.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:18.358Z,1513239078.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:18.710Z,1513239078.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:18.725Z,1513239078.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:18.850Z,1513239078.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:19.119Z,1513239079.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:19.142Z,1513239079.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:19.254Z,1513239079.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:19.517Z,1513239079.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:19.532Z,1513239079.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:19.898Z,1513239079.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:19.979Z,1513239079.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:20.050Z,1513239080.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:20.297Z,1513239080.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:20.343Z,1513239080.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:20.770Z,1513239080.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:20.827Z,1513239080.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:20.846Z,1513239080.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:21.096Z,1513239081.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:21.156Z,1513239081.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:21.250Z,1513239081.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:21.507Z,1513239081.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:21.548Z,1513239081.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:21.912Z,1513239081.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:21.952Z,1513239081.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:22.046Z,1513239082.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:22.315Z,1513239082.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:22.339Z,1513239082.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:22.709Z,1513239082.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:22.762Z,1513239082.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:22.843Z,1513239082.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:23.096Z,1513239083.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:23.151Z,1513239083.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:23.278Z,1513239083.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:23.496Z,1513239083.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:23.552Z,1513239083.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:23.912Z,1513239083.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:23.969Z,1513239083.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:24.074Z,1513239084.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:24.317Z,1513239084.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:24.350Z,1513239084.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:24.710Z,1513239084.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:24.831Z,1513239084.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:24.870Z,1513239084.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:25.110Z,1513239085.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:25.155Z,1513239085.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:25.286Z,1513239085.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:25.514Z,1513239085.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:25.529Z,1513239085.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:26.082Z,1513239086.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:26.877Z,1513239086.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:27.281Z,1513239087.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:28.078Z,1513239088.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:28.873Z,1513239088.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:29.277Z,1513239089.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:29.596Z,1513239089.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:29.762Z,1513239089.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:29.872Z,1513239089.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:29.947Z,1513239089.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:30.074Z,1513239090.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:30.274Z,1513239090.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:30.300Z,1513239090.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:30.682Z,1513239090.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:30.742Z,1513239090.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:30.870Z,1513239090.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:31.095Z,1513239091.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:31.163Z,1513239091.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:31.274Z,1513239091.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:31.452Z,1513239091.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:31.499Z,1513239091.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:31.853Z,1513239091.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:31.914Z,1513239091.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:32.070Z,1513239092.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:32.252Z,1513239092.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:32.292Z,1513239092.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:32.663Z,1513239092.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:32.703Z,1513239092.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:32.866Z,1513239092.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:33.099Z,1513239093.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:33.160Z,1513239093.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:33.269Z,1513239093.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:33.465Z,1513239093.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:33.517Z,1513239093.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:33.865Z,1513239093.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:33.904Z,1513239093.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:34.066Z,1513239094.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:34.261Z,1513239094.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:34.316Z,1513239094.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:34.666Z,1513239094.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:34.726Z,1513239094.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:34.862Z,1513239094.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:35.061Z,1513239095.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:35.084Z,1513239095.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:35.266Z,1513239095.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:35.479Z,1513239095.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:35.524Z,1513239095.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:35.876Z,1513239095.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:35.936Z,1513239095.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:36.062Z,1513239096.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:36.265Z,1513239096.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:36.315Z,1513239096.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:36.664Z,1513239096.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:36.727Z,1513239096.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:36.859Z,1513239096.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:37.062Z,1513239097.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:37.085Z,1513239097.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:37.270Z,1513239097.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:37.472Z,1513239097.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:37.499Z,1513239097.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:37.876Z,1513239097.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:37.919Z,1513239097.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:38.066Z,1513239098.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:38.274Z,1513239098.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:38.322Z,1513239098.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:38.661Z,1513239098.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:38.715Z,1513239098.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:38.864Z,1513239098.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:39.079Z,1513239099.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:39.119Z,1513239099.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:39.277Z,1513239099.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:39.471Z,1513239099.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:39.500Z,1513239099.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:39.876Z,1513239099.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:39.938Z,1513239099.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:40.074Z,1513239100.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:40.269Z,1513239100.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:40.323Z,1513239100.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:40.656Z,1513239100.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:40.691Z,1513239100.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:40.870Z,1513239100.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:41.052Z,1513239101.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:41.108Z,1513239101.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:41.274Z,1513239101.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:41.471Z,1513239101.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:41.515Z,1513239101.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:41.868Z,1513239101.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:41.930Z,1513239101.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:42.070Z,1513239102.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:42.267Z,1513239102.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:42.313Z,1513239102.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:42.658Z,1513239102.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:42.680Z,1513239102.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:42.866Z,1513239102.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:43.086Z,1513239103.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:43.129Z,1513239103.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:43.270Z,1513239103.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:43.483Z,1513239103.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:43.503Z,1513239103.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:43.876Z,1513239103.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:43.921Z,1513239103.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:44.066Z,1513239104.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:44.270Z,1513239104.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:44.285Z,1513239104.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:44.682Z,1513239104.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:44.696Z,1513239104.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:44.861Z,1513239104.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:45.071Z,1513239105.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:45.086Z,1513239105.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:45.265Z,1513239105.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:45.435Z,1513239105.435 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:11:45.473Z,1513239105.473 [NAL9602] Data Fault, FailCount= 2
2017-12-14T08:11:45.473Z,1513239105.473 [NAL9602](ERROR): Data Fault
2017-12-14T08:11:45.490Z,1513239105.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:45.506Z,1513239105.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:45.551Z,1513239105.551 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:11:45.834Z,1513239105.834 [NAL9602](INFO): Powering down
2017-12-14T08:11:45.851Z,1513239105.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:45.876Z,1513239105.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:46.062Z,1513239106.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:46.258Z,1513239106.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:46.284Z,1513239106.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:46.651Z,1513239106.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:46.682Z,1513239106.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:46.696Z,1513239106.696 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:11:46.696Z,1513239106.696 [NAL9602] No Fault, FailCount= 2
2017-12-14T08:11:46.857Z,1513239106.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:47.051Z,1513239107.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:47.094Z,1513239107.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:47.261Z,1513239107.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:47.452Z,1513239107.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:47.491Z,1513239107.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:47.863Z,1513239107.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:47.891Z,1513239107.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:48.058Z,1513239108.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:48.251Z,1513239108.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:48.292Z,1513239108.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:48.655Z,1513239108.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:48.669Z,1513239108.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:48.854Z,1513239108.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:49.094Z,1513239109.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:49.111Z,1513239109.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:49.458Z,1513239109.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:49.474Z,1513239109.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:49.649Z,1513239109.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:49.859Z,1513239109.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:49.875Z,1513239109.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:50.262Z,1513239110.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:50.278Z,1513239110.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:50.445Z,1513239110.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:50.652Z,1513239110.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:50.731Z,1513239110.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:51.060Z,1513239111.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:51.068Z,1513239111.068 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T08:11:51.068Z,1513239111.068 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:11:51.069Z,1513239111.069 [BPC1](ERROR): Data Fault
2017-12-14T08:11:51.078Z,1513239111.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:51.119Z,1513239111.119 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:11:51.241Z,1513239111.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:51.454Z,1513239111.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:51.482Z,1513239111.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:51.862Z,1513239111.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:51.876Z,1513239111.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:52.038Z,1513239112.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:52.260Z,1513239112.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:52.279Z,1513239112.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:52.305Z,1513239112.305 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:11:52.305Z,1513239112.305 [BPC1] No Fault, FailCount= 1
2017-12-14T08:11:52.658Z,1513239112.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:52.727Z,1513239112.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:52.836Z,1513239112.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:53.057Z,1513239113.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:53.072Z,1513239113.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:53.460Z,1513239113.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:53.503Z,1513239113.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:53.629Z,1513239113.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:53.862Z,1513239113.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:53.877Z,1513239113.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:54.259Z,1513239114.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:54.279Z,1513239114.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:54.425Z,1513239114.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:54.651Z,1513239114.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:54.683Z,1513239114.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:55.062Z,1513239115.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:55.078Z,1513239115.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:55.221Z,1513239115.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:55.450Z,1513239115.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:55.483Z,1513239115.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:55.862Z,1513239115.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:55.882Z,1513239115.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:56.017Z,1513239116.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:56.248Z,1513239116.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:56.275Z,1513239116.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:56.654Z,1513239116.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:56.680Z,1513239116.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:56.813Z,1513239116.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:57.076Z,1513239117.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:57.103Z,1513239117.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:57.456Z,1513239117.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:57.471Z,1513239117.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:57.610Z,1513239117.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:57.857Z,1513239117.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:57.871Z,1513239117.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:58.256Z,1513239118.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:58.295Z,1513239118.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:58.405Z,1513239118.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:58.658Z,1513239118.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:58.673Z,1513239118.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:59.058Z,1513239119.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:59.073Z,1513239119.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:59.201Z,1513239119.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:59.460Z,1513239119.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:59.475Z,1513239119.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:59.857Z,1513239119.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:11:59.908Z,1513239119.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:11:59.998Z,1513239119.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:00.283Z,1513239120.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:00.327Z,1513239120.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:00.401Z,1513239120.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:00.657Z,1513239120.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:00.672Z,1513239120.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:00.805Z,1513239120.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.059Z,1513239121.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.119Z,1513239121.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:01.209Z,1513239121.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.468Z,1513239121.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.483Z,1513239121.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:01.613Z,1513239121.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.863Z,1513239121.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:01.878Z,1513239121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:02.017Z,1513239122.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:02.257Z,1513239122.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:02.272Z,1513239122.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:02.421Z,1513239122.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:02.656Z,1513239122.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:02.682Z,1513239122.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:02.825Z,1513239122.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:03.054Z,1513239123.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:03.085Z,1513239123.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:03.229Z,1513239123.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:03.519Z,1513239123.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:03.539Z,1513239123.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:03.850Z,1513239123.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:03.885Z,1513239123.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:04.025Z,1513239124.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:04.252Z,1513239124.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:04.276Z,1513239124.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:04.650Z,1513239124.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:04.675Z,1513239124.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:04.826Z,1513239124.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:05.050Z,1513239125.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:05.091Z,1513239125.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:05.253Z,1513239125.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:05.486Z,1513239125.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:05.501Z,1513239125.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:05.851Z,1513239125.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:05.887Z,1513239125.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:06.049Z,1513239126.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:06.255Z,1513239126.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:06.279Z,1513239126.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:06.670Z,1513239126.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:06.702Z,1513239126.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:06.847Z,1513239126.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:07.057Z,1513239127.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:07.097Z,1513239127.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:07.273Z,1513239127.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:07.456Z,1513239127.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:07.470Z,1513239127.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:07.844Z,1513239127.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:07.871Z,1513239127.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:08.069Z,1513239128.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:08.301Z,1513239128.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:08.414Z,1513239128.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:08.655Z,1513239128.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:08.670Z,1513239128.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:08.873Z,1513239128.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:09.062Z,1513239129.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:09.078Z,1513239129.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:09.277Z,1513239129.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:09.460Z,1513239129.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:09.476Z,1513239129.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:09.859Z,1513239129.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:09.874Z,1513239129.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:10.074Z,1513239130.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:10.257Z,1513239130.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:10.280Z,1513239130.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:10.659Z,1513239130.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:10.674Z,1513239130.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:10.869Z,1513239130.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:11.064Z,1513239131.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:11.079Z,1513239131.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:11.273Z,1513239131.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:11.458Z,1513239131.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:11.472Z,1513239131.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:11.859Z,1513239131.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:11.875Z,1513239131.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:12.069Z,1513239132.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:12.257Z,1513239132.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:12.271Z,1513239132.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:12.659Z,1513239132.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:12.679Z,1513239132.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:12.886Z,1513239132.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:13.079Z,1513239133.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:13.183Z,1513239133.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:13.289Z,1513239133.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:13.454Z,1513239133.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:13.511Z,1513239133.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:13.863Z,1513239133.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:13.912Z,1513239133.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:14.086Z,1513239134.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:14.256Z,1513239134.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:14.272Z,1513239134.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:14.658Z,1513239134.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:14.695Z,1513239134.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:14.881Z,1513239134.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:15.054Z,1513239135.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:15.083Z,1513239135.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:15.286Z,1513239135.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:15.463Z,1513239135.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:15.478Z,1513239135.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:15.842Z,1513239135.842 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:12:15.872Z,1513239135.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:15.887Z,1513239135.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:16.081Z,1513239136.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:16.258Z,1513239136.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:16.281Z,1513239136.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:16.658Z,1513239136.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:16.674Z,1513239136.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:16.877Z,1513239136.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:17.053Z,1513239137.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:17.084Z,1513239137.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:17.281Z,1513239137.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:17.447Z,1513239137.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:17.473Z,1513239137.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:17.859Z,1513239137.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:17.874Z,1513239137.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:18.077Z,1513239138.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:18.260Z,1513239138.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:18.275Z,1513239138.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:18.664Z,1513239138.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:18.679Z,1513239138.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:18.874Z,1513239138.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:19.089Z,1513239139.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:19.104Z,1513239139.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:19.277Z,1513239139.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:19.497Z,1513239139.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:19.537Z,1513239139.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:19.848Z,1513239139.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:19.882Z,1513239139.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:20.074Z,1513239140.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:20.252Z,1513239140.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:20.282Z,1513239140.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:20.655Z,1513239140.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:20.693Z,1513239140.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:20.872Z,1513239140.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:21.051Z,1513239141.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:21.088Z,1513239141.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:21.277Z,1513239141.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:21.455Z,1513239141.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:21.489Z,1513239141.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:21.854Z,1513239141.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:21.869Z,1513239141.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:22.075Z,1513239142.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:22.252Z,1513239142.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:22.267Z,1513239142.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:22.716Z,1513239142.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:22.775Z,1513239142.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:22.870Z,1513239142.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:23.057Z,1513239143.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:23.072Z,1513239143.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:23.273Z,1513239143.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:23.455Z,1513239143.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:23.471Z,1513239143.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:23.858Z,1513239143.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:23.874Z,1513239143.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:24.069Z,1513239144.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:24.260Z,1513239144.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:24.275Z,1513239144.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:24.666Z,1513239144.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:24.680Z,1513239144.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:24.865Z,1513239144.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:25.067Z,1513239145.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:25.099Z,1513239145.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:25.269Z,1513239145.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:25.455Z,1513239145.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:25.483Z,1513239145.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:25.887Z,1513239145.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:25.911Z,1513239145.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:26.067Z,1513239146.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:26.861Z,1513239146.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:27.265Z,1513239147.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:28.061Z,1513239148.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:28.857Z,1513239148.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:29.261Z,1513239149.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:29.352Z,1513239149.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:29.383Z,1513239149.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:29.484Z,1513239149.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:29.519Z,1513239149.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:29.832Z,1513239149.832 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:12:29.850Z,1513239149.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:29.866Z,1513239149.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:30.058Z,1513239150.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:30.263Z,1513239150.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:30.279Z,1513239150.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:30.665Z,1513239150.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:30.680Z,1513239150.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:30.853Z,1513239150.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:31.064Z,1513239151.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:31.087Z,1513239151.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:31.257Z,1513239151.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:31.465Z,1513239151.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:31.487Z,1513239151.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:31.849Z,1513239151.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:31.876Z,1513239151.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:32.053Z,1513239152.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:32.280Z,1513239152.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:32.364Z,1513239152.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:32.654Z,1513239152.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:32.675Z,1513239152.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:32.855Z,1513239152.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:33.070Z,1513239153.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:33.086Z,1513239153.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:33.265Z,1513239153.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:33.469Z,1513239153.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:33.484Z,1513239153.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:33.863Z,1513239153.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:33.881Z,1513239153.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:34.062Z,1513239154.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:34.251Z,1513239154.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:34.278Z,1513239154.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:34.649Z,1513239154.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:34.726Z,1513239154.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:34.859Z,1513239154.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:35.047Z,1513239155.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:35.107Z,1513239155.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:35.273Z,1513239155.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:35.457Z,1513239155.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:35.518Z,1513239155.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:35.861Z,1513239155.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:35.876Z,1513239155.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:36.070Z,1513239156.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:36.261Z,1513239156.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:36.310Z,1513239156.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:36.654Z,1513239156.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:36.675Z,1513239156.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:36.865Z,1513239156.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:37.050Z,1513239157.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:37.099Z,1513239157.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:37.269Z,1513239157.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:37.451Z,1513239157.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:37.472Z,1513239157.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:37.853Z,1513239157.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:37.868Z,1513239157.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:38.065Z,1513239158.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:38.260Z,1513239158.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:38.279Z,1513239158.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:38.664Z,1513239158.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:38.752Z,1513239158.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:38.862Z,1513239158.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:39.064Z,1513239159.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:39.080Z,1513239159.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:39.265Z,1513239159.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:39.454Z,1513239159.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:39.468Z,1513239159.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:39.855Z,1513239159.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:39.875Z,1513239159.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:40.062Z,1513239160.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:40.255Z,1513239160.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:40.274Z,1513239160.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:40.657Z,1513239160.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:40.672Z,1513239160.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:40.858Z,1513239160.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:41.054Z,1513239161.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:41.075Z,1513239161.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:41.261Z,1513239161.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:41.465Z,1513239161.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:41.480Z,1513239161.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:41.876Z,1513239161.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:41.916Z,1513239161.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:42.058Z,1513239162.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:42.257Z,1513239162.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:42.291Z,1513239162.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:42.646Z,1513239162.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:42.660Z,1513239162.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:42.853Z,1513239162.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:43.047Z,1513239163.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:43.067Z,1513239163.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:43.257Z,1513239163.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:43.451Z,1513239163.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:43.466Z,1513239163.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:43.841Z,1513239163.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:43.868Z,1513239163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:44.053Z,1513239164.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:44.265Z,1513239164.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:44.280Z,1513239164.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:44.661Z,1513239164.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:44.683Z,1513239164.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:44.849Z,1513239164.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:45.062Z,1513239165.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:45.113Z,1513239165.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:45.254Z,1513239165.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:45.446Z,1513239165.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:45.499Z,1513239165.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:45.850Z,1513239165.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:45.878Z,1513239165.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:46.049Z,1513239166.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:46.251Z,1513239166.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:46.278Z,1513239166.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:46.647Z,1513239166.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:46.678Z,1513239166.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:46.847Z,1513239166.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:47.047Z,1513239167.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:47.091Z,1513239167.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:47.253Z,1513239167.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:47.461Z,1513239167.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:47.489Z,1513239167.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:47.862Z,1513239167.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:47.892Z,1513239167.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:48.050Z,1513239168.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:48.273Z,1513239168.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:48.315Z,1513239168.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:48.653Z,1513239168.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:48.668Z,1513239168.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:48.847Z,1513239168.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:49.053Z,1513239169.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:49.068Z,1513239169.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:49.257Z,1513239169.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:49.451Z,1513239169.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:49.466Z,1513239169.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:49.848Z,1513239169.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:49.863Z,1513239169.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:50.053Z,1513239170.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:50.266Z,1513239170.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:50.298Z,1513239170.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:50.670Z,1513239170.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:50.695Z,1513239170.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:50.849Z,1513239170.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:51.069Z,1513239171.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:51.098Z,1513239171.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:51.253Z,1513239171.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:51.462Z,1513239171.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:51.512Z,1513239171.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:51.855Z,1513239171.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:51.875Z,1513239171.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:52.049Z,1513239172.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:52.257Z,1513239172.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:52.272Z,1513239172.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:52.655Z,1513239172.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:52.675Z,1513239172.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:52.845Z,1513239172.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:53.050Z,1513239173.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:53.078Z,1513239173.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:53.249Z,1513239173.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:53.469Z,1513239173.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:53.491Z,1513239173.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:53.871Z,1513239173.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:53.891Z,1513239173.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:54.046Z,1513239174.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:54.270Z,1513239174.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:54.284Z,1513239174.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:54.664Z,1513239174.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:54.688Z,1513239174.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:54.842Z,1513239174.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:55.047Z,1513239175.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:55.080Z,1513239175.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:55.245Z,1513239175.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:55.447Z,1513239175.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:55.479Z,1513239175.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:55.847Z,1513239175.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:55.883Z,1513239175.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:56.042Z,1513239176.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:56.269Z,1513239176.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:56.284Z,1513239176.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:56.670Z,1513239176.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:56.684Z,1513239176.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:56.837Z,1513239176.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:57.057Z,1513239177.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:57.122Z,1513239177.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:57.241Z,1513239177.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:57.447Z,1513239177.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:57.495Z,1513239177.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:57.904Z,1513239177.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:57.966Z,1513239177.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:58.038Z,1513239178.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:58.256Z,1513239178.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:58.271Z,1513239178.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:58.666Z,1513239178.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:58.722Z,1513239178.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:58.833Z,1513239178.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:59.064Z,1513239179.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:59.083Z,1513239179.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:59.237Z,1513239179.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:59.470Z,1513239179.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:59.522Z,1513239179.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:12:59.870Z,1513239179.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:12:59.891Z,1513239179.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:00.034Z,1513239180.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:00.266Z,1513239180.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:00.280Z,1513239180.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:00.644Z,1513239180.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:00.675Z,1513239180.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:00.831Z,1513239180.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:01.073Z,1513239181.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:01.121Z,1513239181.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:01.262Z,1513239181.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:01.463Z,1513239181.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:01.486Z,1513239181.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:01.849Z,1513239181.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:01.863Z,1513239181.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:02.057Z,1513239182.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:02.258Z,1513239182.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:02.295Z,1513239182.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:02.666Z,1513239182.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:02.691Z,1513239182.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:02.855Z,1513239182.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:03.081Z,1513239183.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:03.096Z,1513239183.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:03.261Z,1513239183.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:03.458Z,1513239183.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:03.492Z,1513239183.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:03.855Z,1513239183.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:03.894Z,1513239183.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:04.058Z,1513239184.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:04.269Z,1513239184.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:04.308Z,1513239184.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:04.654Z,1513239184.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:04.669Z,1513239184.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:04.854Z,1513239184.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:05.058Z,1513239185.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:05.074Z,1513239185.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:05.257Z,1513239185.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:05.467Z,1513239185.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:05.498Z,1513239185.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:05.866Z,1513239185.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:05.894Z,1513239185.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:06.053Z,1513239186.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:06.258Z,1513239186.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:06.272Z,1513239186.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:06.655Z,1513239186.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:06.671Z,1513239186.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:06.849Z,1513239186.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:07.050Z,1513239187.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:07.073Z,1513239187.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:07.253Z,1513239187.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:07.472Z,1513239187.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:07.503Z,1513239187.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:07.854Z,1513239187.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:07.906Z,1513239187.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:08.050Z,1513239188.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:08.262Z,1513239188.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:08.276Z,1513239188.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:08.661Z,1513239188.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:08.676Z,1513239188.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:08.848Z,1513239188.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:09.066Z,1513239189.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:09.089Z,1513239189.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:09.253Z,1513239189.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:09.447Z,1513239189.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:09.483Z,1513239189.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:09.851Z,1513239189.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:09.883Z,1513239189.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:10.050Z,1513239190.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:10.247Z,1513239190.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:10.272Z,1513239190.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:10.682Z,1513239190.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:10.715Z,1513239190.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:10.846Z,1513239190.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:11.047Z,1513239191.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:11.067Z,1513239191.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:11.249Z,1513239191.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:11.461Z,1513239191.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:11.496Z,1513239191.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:11.865Z,1513239191.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:11.891Z,1513239191.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:12.045Z,1513239192.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:12.267Z,1513239192.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:12.289Z,1513239192.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:12.647Z,1513239192.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:12.662Z,1513239192.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:12.841Z,1513239192.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:13.053Z,1513239193.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:13.068Z,1513239193.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:13.245Z,1513239193.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:13.452Z,1513239193.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:13.471Z,1513239193.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:13.894Z,1513239193.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:13.925Z,1513239193.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:14.043Z,1513239194.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:14.259Z,1513239194.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:14.273Z,1513239194.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:14.661Z,1513239194.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:14.699Z,1513239194.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:14.838Z,1513239194.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:15.070Z,1513239195.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:15.105Z,1513239195.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:15.273Z,1513239195.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:15.456Z,1513239195.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:15.470Z,1513239195.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:15.856Z,1513239195.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:15.870Z,1513239195.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:16.069Z,1513239196.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:16.259Z,1513239196.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:16.274Z,1513239196.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:16.652Z,1513239196.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:16.679Z,1513239196.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:16.867Z,1513239196.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:17.081Z,1513239197.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:17.119Z,1513239197.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:17.274Z,1513239197.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:17.477Z,1513239197.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:17.493Z,1513239197.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:17.868Z,1513239197.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:17.882Z,1513239197.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:18.069Z,1513239198.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:18.271Z,1513239198.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:18.286Z,1513239198.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:18.651Z,1513239198.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:18.678Z,1513239198.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:18.865Z,1513239198.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:19.047Z,1513239199.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:19.079Z,1513239199.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:19.269Z,1513239199.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:19.479Z,1513239199.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:19.499Z,1513239199.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:19.850Z,1513239199.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:19.907Z,1513239199.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:20.067Z,1513239200.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:20.274Z,1513239200.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:20.343Z,1513239200.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:20.661Z,1513239200.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:20.690Z,1513239200.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:20.862Z,1513239200.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:21.070Z,1513239201.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:21.099Z,1513239201.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:21.265Z,1513239201.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:21.457Z,1513239201.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:21.514Z,1513239201.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:21.855Z,1513239201.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:21.871Z,1513239201.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:22.061Z,1513239202.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:22.256Z,1513239202.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:22.318Z,1513239202.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:22.655Z,1513239202.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:22.670Z,1513239202.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:22.857Z,1513239202.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:23.055Z,1513239203.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:23.075Z,1513239203.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:23.261Z,1513239203.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:23.458Z,1513239203.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:23.474Z,1513239203.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:23.861Z,1513239203.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:23.899Z,1513239203.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:24.057Z,1513239204.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:24.268Z,1513239204.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:24.284Z,1513239204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:24.656Z,1513239204.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:24.671Z,1513239204.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:24.675Z,1513239204.675 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:13:24.675Z,1513239204.675 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:13:24.675Z,1513239204.675 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:13:24.675Z,1513239204.675 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:13:24.853Z,1513239204.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:25.051Z,1513239205.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:25.079Z,1513239205.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:25.087Z,1513239205.087 [Default:CheckIn:D] Stopped
2017-12-14T08:13:25.087Z,1513239205.087 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:13:25.257Z,1513239205.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:25.456Z,1513239205.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:25.470Z,1513239205.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 460.161621 min 
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn:E] Stopped
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn] Stopped
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:13:25.474Z,1513239205.474 [Default:CheckIn](INFO): Running loop #45
2017-12-14T08:13:25.475Z,1513239205.475 [Default:CheckIn] Running Loop=45
2017-12-14T08:13:25.475Z,1513239205.475 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:13:25.475Z,1513239205.475 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:13:25.847Z,1513239205.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:25.874Z,1513239205.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:26.056Z,1513239206.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:26.260Z,1513239206.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:26.293Z,1513239206.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:26.850Z,1513239206.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:27.253Z,1513239207.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:28.050Z,1513239208.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:28.847Z,1513239208.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:29.265Z,1513239209.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:29.685Z,1513239209.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:29.719Z,1513239209.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:29.814Z,1513239209.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:29.851Z,1513239209.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:30.062Z,1513239210.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:30.191Z,1513239210.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:30.221Z,1513239210.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:30.577Z,1513239210.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:30.620Z,1513239210.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:30.859Z,1513239210.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:30.975Z,1513239210.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:30.995Z,1513239210.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:31.269Z,1513239211.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:31.389Z,1513239211.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:31.422Z,1513239211.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:31.782Z,1513239211.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:31.819Z,1513239211.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:32.065Z,1513239212.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:32.191Z,1513239212.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:32.219Z,1513239212.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:32.582Z,1513239212.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:32.596Z,1513239212.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:32.861Z,1513239212.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:32.970Z,1513239212.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:32.994Z,1513239212.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:33.265Z,1513239213.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:33.375Z,1513239213.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:33.390Z,1513239213.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:33.774Z,1513239213.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:33.789Z,1513239213.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:34.064Z,1513239214.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:34.186Z,1513239214.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:34.201Z,1513239214.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:34.584Z,1513239214.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:34.600Z,1513239214.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:34.857Z,1513239214.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:34.986Z,1513239214.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:35.000Z,1513239215.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:35.261Z,1513239215.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:35.382Z,1513239215.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:35.396Z,1513239215.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:35.775Z,1513239215.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:35.790Z,1513239215.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:36.058Z,1513239216.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:36.209Z,1513239216.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:36.270Z,1513239216.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:36.570Z,1513239216.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:36.603Z,1513239216.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:36.853Z,1513239216.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:36.967Z,1513239216.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:37.003Z,1513239217.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:37.257Z,1513239217.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:37.382Z,1513239217.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:37.413Z,1513239217.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:37.796Z,1513239217.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:37.815Z,1513239217.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:38.054Z,1513239218.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:38.190Z,1513239218.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:38.211Z,1513239218.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:38.569Z,1513239218.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:38.607Z,1513239218.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:38.849Z,1513239218.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:38.967Z,1513239218.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:38.995Z,1513239218.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:39.253Z,1513239219.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:39.407Z,1513239219.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:39.455Z,1513239219.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:39.779Z,1513239219.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:39.810Z,1513239219.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:40.050Z,1513239220.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:40.181Z,1513239220.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:40.211Z,1513239220.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:40.212Z,1513239220.212 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:40.212Z,1513239220.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 154
2017-12-14T08:13:40.213Z,1513239220.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:13:40.215Z,1513239220.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:40.215Z,1513239220.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2017-12-14T08:13:40.215Z,1513239220.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:13:40.227Z,1513239220.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:13:40.228Z,1513239220.228 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:13:40.616Z,1513239220.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:40.640Z,1513239220.640 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:40.640Z,1513239220.640 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154
2017-12-14T08:13:40.640Z,1513239220.640 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:13:40.688Z,1513239220.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:13:40.688Z,1513239220.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:13:40.688Z,1513239220.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 154
2017-12-14T08:13:40.693Z,1513239220.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:13:40.693Z,1513239220.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2017-12-14T08:13:40.847Z,1513239220.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:40.987Z,1513239220.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:41.015Z,1513239221.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:13:41.015Z,1513239221.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:13:41.015Z,1513239221.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:13:41.016Z,1513239221.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:13:41.016Z,1513239221.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:13:41.016Z,1513239221.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:13:41.028Z,1513239221.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:13:41.028Z,1513239221.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154
2017-12-14T08:13:41.253Z,1513239221.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:41.376Z,1513239221.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:41.395Z,1513239221.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:13:41.395Z,1513239221.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:13:41.395Z,1513239221.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:13:41.823Z,1513239221.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:41.843Z,1513239221.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:42.053Z,1513239222.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:42.178Z,1513239222.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:42.193Z,1513239222.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:42.595Z,1513239222.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:42.680Z,1513239222.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:42.851Z,1513239222.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:42.967Z,1513239222.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:42.984Z,1513239222.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:43.273Z,1513239223.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:43.381Z,1513239223.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:43.415Z,1513239223.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:43.789Z,1513239223.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:43.854Z,1513239223.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:44.070Z,1513239224.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:44.186Z,1513239224.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:44.210Z,1513239224.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:44.573Z,1513239224.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:44.612Z,1513239224.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:44.867Z,1513239224.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:44.972Z,1513239224.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:45.011Z,1513239225.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:45.273Z,1513239225.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:45.372Z,1513239225.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:45.392Z,1513239225.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:45.772Z,1513239225.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:45.786Z,1513239225.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:46.069Z,1513239226.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:46.189Z,1513239226.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:46.221Z,1513239226.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:46.586Z,1513239226.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:46.600Z,1513239226.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:46.866Z,1513239226.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:46.979Z,1513239226.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:46.994Z,1513239226.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:47.269Z,1513239227.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:47.367Z,1513239227.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:47.393Z,1513239227.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:47.766Z,1513239227.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:47.792Z,1513239227.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:48.066Z,1513239228.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:48.166Z,1513239228.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:48.199Z,1513239228.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:48.589Z,1513239228.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:48.604Z,1513239228.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:48.861Z,1513239228.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:48.987Z,1513239228.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:49.002Z,1513239229.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:49.265Z,1513239229.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:49.406Z,1513239229.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:49.427Z,1513239229.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:49.794Z,1513239229.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:49.813Z,1513239229.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:50.062Z,1513239230.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:50.189Z,1513239230.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:50.205Z,1513239230.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:50.575Z,1513239230.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:50.606Z,1513239230.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:50.857Z,1513239230.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:50.982Z,1513239230.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:51.004Z,1513239231.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:51.261Z,1513239231.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:51.375Z,1513239231.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:51.405Z,1513239231.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:51.779Z,1513239231.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:51.804Z,1513239231.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:52.057Z,1513239232.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:52.212Z,1513239232.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:52.231Z,1513239232.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:52.582Z,1513239232.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:52.616Z,1513239232.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:52.853Z,1513239232.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:52.000Z,1513239233.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:53.056Z,1513239233.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:53.257Z,1513239233.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:53.374Z,1513239233.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:53.389Z,1513239233.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:53.775Z,1513239233.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:53.795Z,1513239233.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:54.054Z,1513239234.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:54.176Z,1513239234.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:54.192Z,1513239234.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:54.613Z,1513239234.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:54.641Z,1513239234.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:54.851Z,1513239234.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:54.976Z,1513239234.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:54.995Z,1513239234.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:55.257Z,1513239235.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:55.390Z,1513239235.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:55.465Z,1513239235.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:55.781Z,1513239235.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:55.796Z,1513239235.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:56.057Z,1513239236.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:56.190Z,1513239236.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:56.220Z,1513239236.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:56.574Z,1513239236.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:56.588Z,1513239236.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:56.855Z,1513239236.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:56.975Z,1513239236.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:56.991Z,1513239236.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:57.273Z,1513239237.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:57.374Z,1513239237.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:57.389Z,1513239237.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:57.774Z,1513239237.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:57.795Z,1513239237.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:58.069Z,1513239238.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:58.181Z,1513239238.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:58.196Z,1513239238.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:58.596Z,1513239238.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:58.627Z,1513239238.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:58.867Z,1513239238.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:58.980Z,1513239238.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:59.003Z,1513239239.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:59.273Z,1513239239.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:59.378Z,1513239239.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:59.394Z,1513239239.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:13:59.778Z,1513239239.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:13:59.793Z,1513239239.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:00.070Z,1513239240.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:00.175Z,1513239240.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:00.189Z,1513239240.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:00.574Z,1513239240.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:00.599Z,1513239240.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:00.865Z,1513239240.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:00.977Z,1513239240.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:00.000Z,1513239241.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:01.269Z,1513239241.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:01.386Z,1513239241.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:01.401Z,1513239241.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:01.808Z,1513239241.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:01.854Z,1513239241.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:02.067Z,1513239242.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:02.186Z,1513239242.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:02.202Z,1513239242.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:02.575Z,1513239242.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:02.596Z,1513239242.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:02.861Z,1513239242.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:02.974Z,1513239242.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:02.996Z,1513239242.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:03.268Z,1513239243.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:03.377Z,1513239243.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:03.392Z,1513239243.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:03.774Z,1513239243.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:03.799Z,1513239243.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:04.061Z,1513239244.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:04.185Z,1513239244.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:04.207Z,1513239244.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:04.588Z,1513239244.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:04.608Z,1513239244.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:04.858Z,1513239244.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:05.001Z,1513239245.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:05.092Z,1513239245.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:05.261Z,1513239245.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:05.367Z,1513239245.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:05.381Z,1513239245.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:05.772Z,1513239245.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:05.811Z,1513239245.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:06.058Z,1513239246.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:06.171Z,1513239246.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:06.223Z,1513239246.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:06.573Z,1513239246.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:06.616Z,1513239246.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:06.853Z,1513239246.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:06.975Z,1513239246.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:07.031Z,1513239247.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:07.257Z,1513239247.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:07.385Z,1513239247.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:07.411Z,1513239247.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:07.781Z,1513239247.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:07.804Z,1513239247.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:08.054Z,1513239248.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:08.186Z,1513239248.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:08.236Z,1513239248.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:08.602Z,1513239248.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:08.643Z,1513239248.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:08.849Z,1513239248.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:08.975Z,1513239248.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:08.990Z,1513239248.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:09.255Z,1513239249.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:09.375Z,1513239249.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:09.390Z,1513239249.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:09.774Z,1513239249.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:09.789Z,1513239249.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:10.049Z,1513239250.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:10.178Z,1513239250.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:10.193Z,1513239250.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:10.582Z,1513239250.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:10.597Z,1513239250.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:10.847Z,1513239250.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:10.998Z,1513239250.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:11.027Z,1513239251.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:11.265Z,1513239251.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:11.402Z,1513239251.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:11.434Z,1513239251.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:11.769Z,1513239251.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:11.796Z,1513239251.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:12.062Z,1513239252.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:12.178Z,1513239252.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:12.193Z,1513239252.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:12.565Z,1513239252.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:12.591Z,1513239252.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:12.859Z,1513239252.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:12.992Z,1513239252.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:13.007Z,1513239253.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:13.265Z,1513239253.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:13.388Z,1513239253.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:13.403Z,1513239253.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:13.797Z,1513239253.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:13.812Z,1513239253.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:14.062Z,1513239254.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:14.190Z,1513239254.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:14.207Z,1513239254.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:14.599Z,1513239254.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:14.659Z,1513239254.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:14.857Z,1513239254.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:14.967Z,1513239254.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:14.994Z,1513239254.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:15.261Z,1513239255.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:15.368Z,1513239255.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:15.419Z,1513239255.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:15.771Z,1513239255.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:15.810Z,1513239255.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:16.057Z,1513239256.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:16.182Z,1513239256.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:16.210Z,1513239256.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:16.593Z,1513239256.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:16.615Z,1513239256.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:16.628Z,1513239256.628 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T08:14:16.629Z,1513239256.629 [DropWeight] No Fault, FailCount= 1
2017-12-14T08:14:16.853Z,1513239256.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:16.977Z,1513239256.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:17.011Z,1513239257.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:17.257Z,1513239257.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:17.367Z,1513239257.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:17.411Z,1513239257.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:17.771Z,1513239257.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:17.827Z,1513239257.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:18.054Z,1513239258.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:18.184Z,1513239258.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:18.208Z,1513239258.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:18.573Z,1513239258.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:18.609Z,1513239258.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:18.849Z,1513239258.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:18.976Z,1513239258.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:19.010Z,1513239259.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:19.253Z,1513239259.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:19.392Z,1513239259.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:19.407Z,1513239259.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:19.791Z,1513239259.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:19.805Z,1513239259.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:20.050Z,1513239260.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:20.193Z,1513239260.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:20.208Z,1513239260.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:20.583Z,1513239260.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:20.609Z,1513239260.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:20.846Z,1513239260.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:20.998Z,1513239260.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:21.023Z,1513239261.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:21.249Z,1513239261.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:21.376Z,1513239261.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:21.391Z,1513239261.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:21.777Z,1513239261.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:21.799Z,1513239261.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:22.045Z,1513239262.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:22.186Z,1513239262.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:22.219Z,1513239262.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:22.618Z,1513239262.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:22.641Z,1513239262.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:22.841Z,1513239262.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:22.986Z,1513239262.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:23.000Z,1513239263.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:23.245Z,1513239263.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:23.376Z,1513239263.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:23.391Z,1513239263.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:23.774Z,1513239263.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:23.789Z,1513239263.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:24.042Z,1513239264.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:24.199Z,1513239264.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:24.226Z,1513239264.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:24.584Z,1513239264.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:24.624Z,1513239264.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:24.839Z,1513239264.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:24.978Z,1513239264.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:24.999Z,1513239264.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:25.253Z,1513239265.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:25.378Z,1513239265.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:25.393Z,1513239265.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:25.782Z,1513239265.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:25.820Z,1513239265.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:26.049Z,1513239266.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:26.191Z,1513239266.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:26.220Z,1513239266.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:26.576Z,1513239266.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:26.591Z,1513239266.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:26.847Z,1513239266.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:27.273Z,1513239267.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:28.070Z,1513239268.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:28.865Z,1513239268.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:29.269Z,1513239269.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:30.042Z,1513239270.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:30.066Z,1513239270.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:30.147Z,1513239270.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:30.227Z,1513239270.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:30.271Z,1513239270.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:30.652Z,1513239270.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:30.721Z,1513239270.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:30.861Z,1513239270.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:31.030Z,1513239271.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:31.079Z,1513239271.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:31.265Z,1513239271.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:31.428Z,1513239271.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:31.443Z,1513239271.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:31.820Z,1513239271.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:31.875Z,1513239271.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:32.061Z,1513239272.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:32.226Z,1513239272.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:32.241Z,1513239272.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:32.614Z,1513239272.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:32.643Z,1513239272.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:32.859Z,1513239272.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:33.010Z,1513239273.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:33.046Z,1513239273.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:33.265Z,1513239273.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:33.431Z,1513239273.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:33.451Z,1513239273.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:33.864Z,1513239273.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:33.888Z,1513239273.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:34.062Z,1513239274.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:34.237Z,1513239274.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:34.256Z,1513239274.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:34.608Z,1513239274.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:34.635Z,1513239274.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:34.857Z,1513239274.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:35.009Z,1513239275.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:35.036Z,1513239275.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:35.261Z,1513239275.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:35.409Z,1513239275.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:35.448Z,1513239275.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:35.801Z,1513239275.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:35.816Z,1513239275.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:36.057Z,1513239276.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:36.218Z,1513239276.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:36.254Z,1513239276.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:36.630Z,1513239276.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:36.645Z,1513239276.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:36.853Z,1513239276.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:37.031Z,1513239277.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:37.066Z,1513239277.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:37.257Z,1513239277.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:37.423Z,1513239277.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:37.457Z,1513239277.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:37.812Z,1513239277.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:37.835Z,1513239277.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:38.053Z,1513239278.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:38.215Z,1513239278.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:38.230Z,1513239278.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:38.615Z,1513239278.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:38.631Z,1513239278.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:38.851Z,1513239278.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:39.017Z,1513239279.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:39.032Z,1513239279.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:39.265Z,1513239279.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:39.425Z,1513239279.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:39.440Z,1513239279.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:39.830Z,1513239279.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:39.844Z,1513239279.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:40.062Z,1513239280.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:40.255Z,1513239280.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:40.319Z,1513239280.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:40.616Z,1513239280.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:40.635Z,1513239280.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:40.858Z,1513239280.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:41.016Z,1513239281.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:41.031Z,1513239281.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:41.265Z,1513239281.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:41.420Z,1513239281.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:41.436Z,1513239281.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:41.816Z,1513239281.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:41.831Z,1513239281.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:42.062Z,1513239282.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:42.223Z,1513239282.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:42.238Z,1513239282.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:42.621Z,1513239282.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:42.644Z,1513239282.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:42.857Z,1513239282.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:43.022Z,1513239283.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:43.037Z,1513239283.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:43.261Z,1513239283.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:43.451Z,1513239283.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:43.480Z,1513239283.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:43.817Z,1513239283.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:43.839Z,1513239283.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:44.057Z,1513239284.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:44.222Z,1513239284.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:44.237Z,1513239284.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:44.615Z,1513239284.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:44.632Z,1513239284.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:44.853Z,1513239284.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:45.010Z,1513239285.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:45.037Z,1513239285.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:45.257Z,1513239285.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:45.430Z,1513239285.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:45.445Z,1513239285.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:45.830Z,1513239285.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:45.844Z,1513239285.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:46.055Z,1513239286.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:46.230Z,1513239286.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:46.244Z,1513239286.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:46.645Z,1513239286.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:46.666Z,1513239286.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:46.850Z,1513239286.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:47.007Z,1513239287.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:47.041Z,1513239287.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:47.253Z,1513239287.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:47.408Z,1513239287.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:47.434Z,1513239287.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:47.807Z,1513239287.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:47.833Z,1513239287.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:48.050Z,1513239288.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:48.235Z,1513239288.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:48.250Z,1513239288.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:48.631Z,1513239288.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:48.651Z,1513239288.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:48.845Z,1513239288.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:49.026Z,1513239289.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:49.049Z,1513239289.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:49.249Z,1513239289.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:49.408Z,1513239289.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:49.447Z,1513239289.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:49.807Z,1513239289.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:49.845Z,1513239289.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:50.046Z,1513239290.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:50.212Z,1513239290.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:50.244Z,1513239290.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:50.623Z,1513239290.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:50.663Z,1513239290.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:50.841Z,1513239290.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:51.018Z,1513239291.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:51.033Z,1513239291.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:51.245Z,1513239291.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:51.426Z,1513239291.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:51.457Z,1513239291.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:51.830Z,1513239291.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:51.861Z,1513239291.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:52.042Z,1513239292.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:52.235Z,1513239292.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:52.291Z,1513239292.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:52.616Z,1513239292.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:52.631Z,1513239292.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:52.839Z,1513239292.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:53.068Z,1513239293.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:53.092Z,1513239293.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:53.438Z,1513239293.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:53.474Z,1513239293.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:53.634Z,1513239293.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:53.817Z,1513239293.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:53.832Z,1513239293.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:54.037Z,1513239294.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:54.227Z,1513239294.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:54.247Z,1513239294.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:54.626Z,1513239294.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:54.644Z,1513239294.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:54.836Z,1513239294.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:55.023Z,1513239295.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:55.044Z,1513239295.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:55.257Z,1513239295.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:55.419Z,1513239295.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:55.427Z,1513239295.427 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:14:55.427Z,1513239295.427 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:14:55.427Z,1513239295.427 [BPC1](ERROR): Communications Fault
2017-12-14T08:14:55.435Z,1513239295.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:55.450Z,1513239295.450 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:14:55.807Z,1513239295.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:55.840Z,1513239295.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:56.053Z,1513239296.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:56.207Z,1513239296.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:56.234Z,1513239296.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:56.620Z,1513239296.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:56.640Z,1513239296.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:56.698Z,1513239296.698 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:14:56.698Z,1513239296.698 [BPC1] No Fault, FailCount= 1
2017-12-14T08:14:56.849Z,1513239296.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:57.007Z,1513239297.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:57.091Z,1513239297.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:57.253Z,1513239297.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:57.480Z,1513239297.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:57.495Z,1513239297.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:57.832Z,1513239297.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:57.847Z,1513239297.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:58.050Z,1513239298.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:58.226Z,1513239298.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:58.241Z,1513239298.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:58.629Z,1513239298.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:58.643Z,1513239298.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:58.846Z,1513239298.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:59.008Z,1513239299.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:59.039Z,1513239299.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:59.249Z,1513239299.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:59.408Z,1513239299.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:59.443Z,1513239299.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:14:59.842Z,1513239299.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:14:59.882Z,1513239299.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:00.046Z,1513239300.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:00.230Z,1513239300.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:00.244Z,1513239300.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:00.631Z,1513239300.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:00.651Z,1513239300.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:00.841Z,1513239300.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:01.039Z,1513239301.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:01.059Z,1513239301.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:01.245Z,1513239301.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:01.412Z,1513239301.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:01.439Z,1513239301.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:01.807Z,1513239301.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:01.843Z,1513239301.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:02.041Z,1513239302.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:02.201Z,1513239302.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:02.215Z,1513239302.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:02.608Z,1513239302.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:02.647Z,1513239302.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:02.837Z,1513239302.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:03.037Z,1513239303.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:03.067Z,1513239303.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:03.241Z,1513239303.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:03.425Z,1513239303.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:03.447Z,1513239303.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:03.826Z,1513239303.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:03.855Z,1513239303.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:04.038Z,1513239304.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:04.227Z,1513239304.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:04.255Z,1513239304.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:04.621Z,1513239304.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:04.657Z,1513239304.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:04.833Z,1513239304.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:05.014Z,1513239305.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:05.028Z,1513239305.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:05.237Z,1513239305.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:05.414Z,1513239305.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:05.459Z,1513239305.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:05.815Z,1513239305.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:05.829Z,1513239305.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:06.036Z,1513239306.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:06.227Z,1513239306.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:06.263Z,1513239306.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:06.631Z,1513239306.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:06.663Z,1513239306.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:06.834Z,1513239306.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:07.030Z,1513239307.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:07.056Z,1513239307.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:07.269Z,1513239307.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:07.412Z,1513239307.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:07.427Z,1513239307.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:07.818Z,1513239307.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:07.846Z,1513239307.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:08.065Z,1513239308.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:08.215Z,1513239308.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:08.229Z,1513239308.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:08.614Z,1513239308.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:08.629Z,1513239308.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:08.862Z,1513239308.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:09.016Z,1513239309.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:09.032Z,1513239309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:09.265Z,1513239309.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:09.440Z,1513239309.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:09.500Z,1513239309.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:09.829Z,1513239309.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:09.860Z,1513239309.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:10.062Z,1513239310.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:10.229Z,1513239310.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:10.244Z,1513239310.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:10.617Z,1513239310.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:10.631Z,1513239310.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:10.857Z,1513239310.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:11.011Z,1513239311.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:11.039Z,1513239311.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:11.261Z,1513239311.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:11.421Z,1513239311.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:11.443Z,1513239311.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:11.817Z,1513239311.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:11.832Z,1513239311.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:12.057Z,1513239312.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:12.225Z,1513239312.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:12.240Z,1513239312.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:12.658Z,1513239312.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:12.679Z,1513239312.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:12.853Z,1513239312.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:13.028Z,1513239313.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:13.053Z,1513239313.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:13.260Z,1513239313.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:13.423Z,1513239313.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:13.438Z,1513239313.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:13.807Z,1513239313.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:13.843Z,1513239313.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:14.054Z,1513239314.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:14.207Z,1513239314.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:14.244Z,1513239314.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:14.630Z,1513239314.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:14.645Z,1513239314.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:14.850Z,1513239314.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:15.007Z,1513239315.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:15.040Z,1513239315.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:15.253Z,1513239315.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:15.429Z,1513239315.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:15.456Z,1513239315.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:15.846Z,1513239315.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:15.867Z,1513239315.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:16.050Z,1513239316.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:16.227Z,1513239316.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:16.275Z,1513239316.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:16.615Z,1513239316.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:16.630Z,1513239316.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:16.846Z,1513239316.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:17.016Z,1513239317.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:17.070Z,1513239317.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:17.249Z,1513239317.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:17.412Z,1513239317.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:17.439Z,1513239317.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:17.817Z,1513239317.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:17.862Z,1513239317.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:18.048Z,1513239318.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:18.231Z,1513239318.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:18.265Z,1513239318.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:18.630Z,1513239318.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:18.654Z,1513239318.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:18.842Z,1513239318.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:19.037Z,1513239319.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:19.077Z,1513239319.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:19.245Z,1513239319.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:19.407Z,1513239319.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:19.433Z,1513239319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:19.811Z,1513239319.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:19.837Z,1513239319.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:20.041Z,1513239320.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:20.208Z,1513239320.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:20.250Z,1513239320.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:20.606Z,1513239320.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:20.643Z,1513239320.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:20.839Z,1513239320.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:21.007Z,1513239321.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:21.038Z,1513239321.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:21.253Z,1513239321.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:21.428Z,1513239321.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:21.447Z,1513239321.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:21.813Z,1513239321.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:21.851Z,1513239321.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:22.050Z,1513239322.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:22.235Z,1513239322.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:22.258Z,1513239322.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:22.608Z,1513239322.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:22.647Z,1513239322.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:22.847Z,1513239322.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:23.007Z,1513239323.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:23.040Z,1513239323.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:23.257Z,1513239323.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:23.408Z,1513239323.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:23.443Z,1513239323.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:23.811Z,1513239323.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:23.825Z,1513239323.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:24.053Z,1513239324.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:24.221Z,1513239324.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:24.249Z,1513239324.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:24.625Z,1513239324.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:24.651Z,1513239324.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:24.849Z,1513239324.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:25.022Z,1513239325.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:25.057Z,1513239325.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:25.253Z,1513239325.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:25.419Z,1513239325.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:25.462Z,1513239325.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:25.817Z,1513239325.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:25.833Z,1513239325.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:26.050Z,1513239326.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:26.217Z,1513239326.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:26.271Z,1513239326.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:26.613Z,1513239326.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:26.640Z,1513239326.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:26.846Z,1513239326.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:27.249Z,1513239327.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:28.046Z,1513239328.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:28.841Z,1513239328.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:29.246Z,1513239329.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:30.041Z,1513239330.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:30.218Z,1513239330.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:30.234Z,1513239330.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:30.358Z,1513239330.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:30.379Z,1513239330.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:30.719Z,1513239330.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:30.765Z,1513239330.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:30.837Z,1513239330.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:31.107Z,1513239331.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:31.136Z,1513239331.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:31.241Z,1513239331.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:31.482Z,1513239331.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:31.496Z,1513239331.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:31.912Z,1513239331.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:31.929Z,1513239331.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:32.037Z,1513239332.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:32.279Z,1513239332.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:32.293Z,1513239332.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:32.679Z,1513239332.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:32.696Z,1513239332.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:32.834Z,1513239332.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:33.101Z,1513239333.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:33.123Z,1513239333.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:33.237Z,1513239333.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:33.502Z,1513239333.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:33.516Z,1513239333.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:33.900Z,1513239333.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:33.914Z,1513239333.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:34.034Z,1513239334.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:34.290Z,1513239334.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:34.313Z,1513239334.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:34.686Z,1513239334.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:34.717Z,1513239334.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:34.839Z,1513239334.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:35.114Z,1513239335.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:35.155Z,1513239335.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:35.261Z,1513239335.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:35.501Z,1513239335.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:35.517Z,1513239335.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:35.903Z,1513239335.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:35.919Z,1513239335.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:36.058Z,1513239336.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:36.280Z,1513239336.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:36.322Z,1513239336.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:36.683Z,1513239336.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:36.754Z,1513239336.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:36.858Z,1513239336.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:37.098Z,1513239337.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:37.132Z,1513239337.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:37.353Z,1513239337.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:37.511Z,1513239337.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:37.536Z,1513239337.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:37.898Z,1513239337.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:37.927Z,1513239337.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:38.149Z,1513239338.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:38.286Z,1513239338.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:38.325Z,1513239338.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:38.684Z,1513239338.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:38.711Z,1513239338.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:38.910Z,1513239338.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:39.104Z,1513239339.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:39.159Z,1513239339.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:39.493Z,1513239339.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:39.507Z,1513239339.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:39.705Z,1513239339.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:39.892Z,1513239339.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:39.954Z,1513239339.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:40.291Z,1513239340.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:40.306Z,1513239340.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:40.503Z,1513239340.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:40.688Z,1513239340.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:40.707Z,1513239340.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:40.910Z,1513239340.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:41.092Z,1513239341.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:41.119Z,1513239341.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:41.498Z,1513239341.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:41.520Z,1513239341.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:41.705Z,1513239341.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:41.903Z,1513239341.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:41.917Z,1513239341.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:42.303Z,1513239342.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:42.357Z,1513239342.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:42.503Z,1513239342.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:42.679Z,1513239342.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:42.715Z,1513239342.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:42.925Z,1513239342.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:43.101Z,1513239343.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:43.127Z,1513239343.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:43.490Z,1513239343.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:43.518Z,1513239343.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:43.722Z,1513239343.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:43.890Z,1513239343.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:43.917Z,1513239343.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:44.280Z,1513239344.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:44.318Z,1513239344.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:44.521Z,1513239344.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:44.679Z,1513239344.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:44.716Z,1513239344.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:44.925Z,1513239344.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:45.102Z,1513239345.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:45.116Z,1513239345.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:45.502Z,1513239345.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:45.517Z,1513239345.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:45.721Z,1513239345.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:45.886Z,1513239345.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:45.909Z,1513239345.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:46.288Z,1513239346.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:46.303Z,1513239346.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:46.519Z,1513239346.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:46.688Z,1513239346.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:46.704Z,1513239346.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:46.963Z,1513239346.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:47.098Z,1513239347.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:47.112Z,1513239347.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:47.501Z,1513239347.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:47.516Z,1513239347.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:47.757Z,1513239347.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:47.894Z,1513239347.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:47.908Z,1513239347.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:48.291Z,1513239348.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:48.347Z,1513239348.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:48.553Z,1513239348.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:48.701Z,1513239348.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:48.876Z,1513239348.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:49.093Z,1513239349.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:49.131Z,1513239349.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:49.494Z,1513239349.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:49.509Z,1513239349.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:49.902Z,1513239349.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:49.916Z,1513239349.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:50.293Z,1513239350.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:50.307Z,1513239350.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:50.692Z,1513239350.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:50.707Z,1513239350.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:51.093Z,1513239351.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:51.108Z,1513239351.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:51.494Z,1513239351.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:51.509Z,1513239351.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:51.894Z,1513239351.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:51.910Z,1513239351.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:52.287Z,1513239352.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:52.307Z,1513239352.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:52.689Z,1513239352.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:52.711Z,1513239352.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:53.098Z,1513239353.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:53.113Z,1513239353.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:53.501Z,1513239353.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:53.566Z,1513239353.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:53.902Z,1513239353.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:53.917Z,1513239353.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:54.284Z,1513239354.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:54.309Z,1513239354.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:54.680Z,1513239354.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:54.706Z,1513239354.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:55.110Z,1513239355.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:55.132Z,1513239355.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:55.513Z,1513239355.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:55.528Z,1513239355.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:55.890Z,1513239355.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:55.927Z,1513239355.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:56.279Z,1513239356.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:56.314Z,1513239356.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:56.679Z,1513239356.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:56.694Z,1513239356.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:57.106Z,1513239357.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:57.121Z,1513239357.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:57.497Z,1513239357.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:57.527Z,1513239357.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:57.899Z,1513239357.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:57.932Z,1513239357.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:58.282Z,1513239358.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:58.340Z,1513239358.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:58.690Z,1513239358.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:58.705Z,1513239358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:59.102Z,1513239359.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:59.158Z,1513239359.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:59.494Z,1513239359.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:59.509Z,1513239359.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:15:59.938Z,1513239359.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:15:59.953Z,1513239359.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:00.287Z,1513239360.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:00.347Z,1513239360.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:00.685Z,1513239360.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:00.787Z,1513239360.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:01.092Z,1513239361.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:01.147Z,1513239361.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:01.503Z,1513239361.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:01.533Z,1513239361.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:01.898Z,1513239361.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:01.915Z,1513239361.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:02.291Z,1513239362.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:02.306Z,1513239362.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:02.676Z,1513239362.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:02.715Z,1513239362.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:03.090Z,1513239363.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:03.160Z,1513239363.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:03.503Z,1513239363.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:03.527Z,1513239363.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:03.890Z,1513239363.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:03.929Z,1513239363.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:04.284Z,1513239364.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:04.315Z,1513239364.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:04.679Z,1513239364.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:04.713Z,1513239364.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:05.098Z,1513239365.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:05.112Z,1513239365.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:05.497Z,1513239365.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:05.511Z,1513239365.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:05.898Z,1513239365.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:05.912Z,1513239365.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:06.290Z,1513239366.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:06.305Z,1513239366.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:06.696Z,1513239366.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:06.711Z,1513239366.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:07.098Z,1513239367.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:07.128Z,1513239367.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:07.497Z,1513239367.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:07.511Z,1513239367.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:07.892Z,1513239367.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:07.932Z,1513239367.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:08.288Z,1513239368.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:08.317Z,1513239368.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:08.684Z,1513239368.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:08.727Z,1513239368.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:09.110Z,1513239369.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:09.125Z,1513239369.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:09.506Z,1513239369.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:09.559Z,1513239369.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:09.898Z,1513239369.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:09.914Z,1513239369.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:10.309Z,1513239370.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:10.324Z,1513239370.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:10.679Z,1513239370.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:10.718Z,1513239370.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:11.102Z,1513239371.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:11.120Z,1513239371.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:11.506Z,1513239371.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:11.521Z,1513239371.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:11.911Z,1513239371.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:11.975Z,1513239371.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:12.292Z,1513239372.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:12.321Z,1513239372.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:12.679Z,1513239372.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:12.717Z,1513239372.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:13.108Z,1513239373.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:13.123Z,1513239373.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:13.498Z,1513239373.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:13.529Z,1513239373.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:13.894Z,1513239373.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:13.919Z,1513239373.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:14.289Z,1513239374.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:14.333Z,1513239374.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:14.684Z,1513239374.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:14.700Z,1513239374.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:15.100Z,1513239375.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:15.172Z,1513239375.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:15.517Z,1513239375.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:15.537Z,1513239375.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:15.898Z,1513239375.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:15.938Z,1513239375.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:16.291Z,1513239376.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:16.306Z,1513239376.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:16.689Z,1513239376.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:16.703Z,1513239376.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:17.111Z,1513239377.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:17.153Z,1513239377.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:17.493Z,1513239377.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:17.507Z,1513239377.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:17.894Z,1513239377.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:17.909Z,1513239377.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:18.283Z,1513239378.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:18.339Z,1513239378.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:18.706Z,1513239378.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:18.758Z,1513239378.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:19.120Z,1513239379.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:19.179Z,1513239379.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:19.501Z,1513239379.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:19.531Z,1513239379.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:19.899Z,1513239379.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:19.936Z,1513239379.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:20.127Z,1513239380.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:20.290Z,1513239380.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:20.365Z,1513239380.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:20.700Z,1513239380.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:20.796Z,1513239380.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:20.926Z,1513239380.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:21.102Z,1513239381.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:21.127Z,1513239381.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:21.330Z,1513239381.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:21.568Z,1513239381.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:21.591Z,1513239381.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:21.892Z,1513239381.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:21.975Z,1513239381.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:22.126Z,1513239382.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:22.283Z,1513239382.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:22.317Z,1513239382.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:22.692Z,1513239382.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:22.743Z,1513239382.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:22.926Z,1513239382.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:23.116Z,1513239383.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:23.160Z,1513239383.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:23.496Z,1513239383.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:23.525Z,1513239383.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:23.722Z,1513239383.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:23.897Z,1513239383.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:23.968Z,1513239383.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:24.289Z,1513239384.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:24.337Z,1513239384.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:24.522Z,1513239384.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:24.693Z,1513239384.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:24.740Z,1513239384.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:24.929Z,1513239384.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:25.116Z,1513239385.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:25.192Z,1513239385.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:25.492Z,1513239385.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:25.540Z,1513239385.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:25.726Z,1513239385.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:25.890Z,1513239385.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:25.904Z,1513239385.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:26.288Z,1513239386.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:26.304Z,1513239386.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:26.523Z,1513239386.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:26.695Z,1513239386.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:26.742Z,1513239386.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:26.925Z,1513239386.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:31.266Z,1513239391.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:31.936Z,1513239391.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:32.002Z,1513239392.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:32.062Z,1513239392.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:32.116Z,1513239392.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:32.151Z,1513239392.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:32.505Z,1513239392.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:32.528Z,1513239392.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:32.919Z,1513239392.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:32.958Z,1513239392.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:33.300Z,1513239393.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:33.320Z,1513239393.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:33.684Z,1513239393.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:33.722Z,1513239393.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:34.061Z,1513239394.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:34.133Z,1513239394.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:34.205Z,1513239394.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:34.546Z,1513239394.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:34.594Z,1513239394.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:34.857Z,1513239394.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:34.925Z,1513239394.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:34.985Z,1513239394.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:35.261Z,1513239395.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:35.342Z,1513239395.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:35.388Z,1513239395.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:35.695Z,1513239395.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:35.719Z,1513239395.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:36.058Z,1513239396.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:36.095Z,1513239396.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:36.148Z,1513239396.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:36.554Z,1513239396.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:36.620Z,1513239396.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:36.867Z,1513239396.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:36.896Z,1513239396.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:36.954Z,1513239396.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:37.274Z,1513239397.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:37.290Z,1513239397.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:37.335Z,1513239397.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:37.699Z,1513239397.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:37.743Z,1513239397.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:38.069Z,1513239398.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:38.108Z,1513239398.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:38.149Z,1513239398.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:38.564Z,1513239398.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:38.606Z,1513239398.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:38.865Z,1513239398.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:38.918Z,1513239398.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:38.962Z,1513239398.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:39.270Z,1513239399.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:39.287Z,1513239399.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:39.318Z,1513239399.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:39.708Z,1513239399.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:39.732Z,1513239399.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:40.066Z,1513239400.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:40.120Z,1513239400.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:40.143Z,1513239400.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:40.566Z,1513239400.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:40.599Z,1513239400.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:40.861Z,1513239400.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:40.934Z,1513239400.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:40.978Z,1513239400.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:41.265Z,1513239401.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:41.294Z,1513239401.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:41.376Z,1513239401.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:41.377Z,1513239401.377 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:41.377Z,1513239401.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 155
2017-12-14T08:16:41.377Z,1513239401.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:16:41.382Z,1513239401.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:41.382Z,1513239401.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2017-12-14T08:16:41.382Z,1513239401.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:16:41.404Z,1513239401.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:16:41.404Z,1513239401.404 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:16:41.693Z,1513239401.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:41.712Z,1513239401.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:41.712Z,1513239401.712 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155
2017-12-14T08:16:41.712Z,1513239401.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:16:41.762Z,1513239401.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:16:41.762Z,1513239401.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:16:41.762Z,1513239401.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 155
2017-12-14T08:16:41.762Z,1513239401.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:16:41.763Z,1513239401.763 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2017-12-14T08:16:42.108Z,1513239402.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:42.146Z,1513239402.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:16:42.147Z,1513239402.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:16:42.147Z,1513239402.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:16:42.147Z,1513239402.147 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:16:42.148Z,1513239402.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:16:42.148Z,1513239402.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:16:42.184Z,1513239402.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:16:42.184Z,1513239402.184 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155
2017-12-14T08:16:42.518Z,1513239402.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:42.673Z,1513239402.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:16:42.673Z,1513239402.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:16:42.673Z,1513239402.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:16:42.914Z,1513239402.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:42.954Z,1513239402.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:43.309Z,1513239403.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:43.363Z,1513239403.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:43.700Z,1513239403.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:43.747Z,1513239403.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:44.102Z,1513239404.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:44.162Z,1513239404.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:44.514Z,1513239404.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:44.559Z,1513239404.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:44.907Z,1513239404.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:44.947Z,1513239404.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:45.296Z,1513239405.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:45.315Z,1513239405.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:45.714Z,1513239405.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:45.735Z,1513239405.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:46.109Z,1513239406.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:46.124Z,1513239406.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:46.512Z,1513239406.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:46.527Z,1513239406.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:46.910Z,1513239406.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:46.941Z,1513239406.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:47.292Z,1513239407.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:47.323Z,1513239407.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:47.683Z,1513239407.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:47.698Z,1513239407.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:48.117Z,1513239408.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:48.144Z,1513239408.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:48.607Z,1513239408.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:48.639Z,1513239408.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:48.892Z,1513239408.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:48.915Z,1513239408.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:49.298Z,1513239409.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:49.313Z,1513239409.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:49.701Z,1513239409.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:49.715Z,1513239409.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:50.098Z,1513239410.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:50.125Z,1513239410.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:50.555Z,1513239410.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:50.598Z,1513239410.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:50.904Z,1513239410.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:50.923Z,1513239410.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:51.308Z,1513239411.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:51.328Z,1513239411.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:51.704Z,1513239411.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:51.719Z,1513239411.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:52.120Z,1513239412.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:52.134Z,1513239412.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:52.538Z,1513239412.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:52.588Z,1513239412.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:52.898Z,1513239412.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:52.951Z,1513239412.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:53.284Z,1513239413.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:53.303Z,1513239413.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:53.689Z,1513239413.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:53.704Z,1513239413.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:54.106Z,1513239414.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:54.131Z,1513239414.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:54.584Z,1513239414.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:54.599Z,1513239414.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:54.902Z,1513239414.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:54.917Z,1513239414.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:55.297Z,1513239415.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:55.312Z,1513239415.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:55.707Z,1513239415.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:55.721Z,1513239415.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:56.099Z,1513239416.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:56.119Z,1513239416.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:56.502Z,1513239416.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:56.604Z,1513239416.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:56.894Z,1513239416.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:56.926Z,1513239416.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:57.292Z,1513239417.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:57.327Z,1513239417.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:57.688Z,1513239417.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:57.707Z,1513239417.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:58.109Z,1513239418.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:58.131Z,1513239418.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:58.490Z,1513239418.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:58.505Z,1513239418.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:58.918Z,1513239418.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:58.942Z,1513239418.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:59.294Z,1513239419.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:59.309Z,1513239419.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:16:59.688Z,1513239419.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:16:59.712Z,1513239419.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:00.138Z,1513239420.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:00.153Z,1513239420.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:00.506Z,1513239420.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:00.536Z,1513239420.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:00.935Z,1513239420.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:00.989Z,1513239420.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:01.294Z,1513239421.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:01.318Z,1513239421.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:01.696Z,1513239421.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:01.719Z,1513239421.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:02.102Z,1513239422.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:02.118Z,1513239422.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:02.564Z,1513239422.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:02.584Z,1513239422.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:02.917Z,1513239422.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:02.978Z,1513239422.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:03.288Z,1513239423.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:03.360Z,1513239423.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:03.684Z,1513239423.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:03.715Z,1513239423.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:04.102Z,1513239424.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:04.179Z,1513239424.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:04.556Z,1513239424.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:04.594Z,1513239424.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:04.894Z,1513239424.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:04.944Z,1513239424.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:05.288Z,1513239425.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:05.323Z,1513239425.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:05.682Z,1513239425.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:05.696Z,1513239425.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:06.097Z,1513239426.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:06.131Z,1513239426.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:06.574Z,1513239426.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:06.588Z,1513239426.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:06.890Z,1513239426.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:06.918Z,1513239426.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:07.306Z,1513239427.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:07.342Z,1513239427.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:07.699Z,1513239427.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:07.713Z,1513239427.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:08.092Z,1513239428.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:08.119Z,1513239428.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:08.573Z,1513239428.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:08.595Z,1513239428.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:08.904Z,1513239428.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:08.931Z,1513239428.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:09.291Z,1513239429.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:09.311Z,1513239429.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:09.690Z,1513239429.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:09.720Z,1513239429.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:10.108Z,1513239430.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:10.124Z,1513239430.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:10.520Z,1513239430.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:10.611Z,1513239430.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:10.921Z,1513239430.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:10.948Z,1513239430.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:11.283Z,1513239431.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:11.319Z,1513239431.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:11.680Z,1513239431.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:11.706Z,1513239431.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:12.108Z,1513239432.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:12.123Z,1513239432.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:12.510Z,1513239432.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:12.524Z,1513239432.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:12.911Z,1513239432.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:12.942Z,1513239432.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:13.288Z,1513239433.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:13.356Z,1513239433.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:13.687Z,1513239433.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:13.712Z,1513239433.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:14.108Z,1513239434.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:14.123Z,1513239434.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:14.513Z,1513239434.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:14.527Z,1513239434.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:14.917Z,1513239434.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:14.932Z,1513239434.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:15.284Z,1513239435.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:15.319Z,1513239435.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:15.683Z,1513239435.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:15.727Z,1513239435.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:16.109Z,1513239436.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:16.124Z,1513239436.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:16.556Z,1513239436.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:16.581Z,1513239436.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:16.911Z,1513239436.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:16.932Z,1513239436.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:17.293Z,1513239437.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:17.327Z,1513239437.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:17.687Z,1513239437.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:17.719Z,1513239437.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:18.094Z,1513239438.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:18.139Z,1513239438.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:18.555Z,1513239438.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:18.585Z,1513239438.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:18.917Z,1513239438.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:18.948Z,1513239438.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:19.312Z,1513239439.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:19.326Z,1513239439.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:19.692Z,1513239439.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:19.722Z,1513239439.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:20.099Z,1513239440.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:20.135Z,1513239440.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:20.550Z,1513239440.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:20.572Z,1513239440.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:20.906Z,1513239440.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:20.943Z,1513239440.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:21.295Z,1513239441.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:21.315Z,1513239441.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:21.691Z,1513239441.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:21.714Z,1513239441.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:22.117Z,1513239442.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:22.155Z,1513239442.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:22.560Z,1513239442.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:22.582Z,1513239442.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:22.910Z,1513239442.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:22.930Z,1513239442.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:23.288Z,1513239443.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:23.319Z,1513239443.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:23.684Z,1513239443.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:23.731Z,1513239443.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:24.095Z,1513239444.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:24.128Z,1513239444.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:24.544Z,1513239444.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:24.600Z,1513239444.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:24.906Z,1513239444.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:24.963Z,1513239444.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:25.328Z,1513239445.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:25.357Z,1513239445.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:25.692Z,1513239445.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:25.747Z,1513239445.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:26.099Z,1513239446.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:26.119Z,1513239446.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:26.498Z,1513239446.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:26.519Z,1513239446.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:26.938Z,1513239446.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:26.959Z,1513239446.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:30.268Z,1513239450.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:30.291Z,1513239450.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:30.398Z,1513239450.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:30.421Z,1513239450.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:30.759Z,1513239450.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:30.787Z,1513239450.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:31.167Z,1513239451.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:31.182Z,1513239451.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:31.558Z,1513239451.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:31.583Z,1513239451.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:31.940Z,1513239451.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:31.975Z,1513239451.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:32.362Z,1513239452.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:32.376Z,1513239452.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:32.758Z,1513239452.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:32.772Z,1513239452.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:33.158Z,1513239453.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:33.198Z,1513239453.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:33.574Z,1513239453.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:33.588Z,1513239453.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:33.963Z,1513239453.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:34.021Z,1513239454.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:34.344Z,1513239454.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:34.382Z,1513239454.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:34.739Z,1513239454.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:34.830Z,1513239454.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:35.161Z,1513239455.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:35.187Z,1513239455.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:35.546Z,1513239455.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:35.576Z,1513239455.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:35.946Z,1513239455.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:35.975Z,1513239455.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:36.366Z,1513239456.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:36.399Z,1513239456.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:36.764Z,1513239456.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:36.822Z,1513239456.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:37.156Z,1513239457.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:37.188Z,1513239457.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:37.546Z,1513239457.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:37.574Z,1513239457.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:37.978Z,1513239457.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:38.006Z,1513239458.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:38.355Z,1513239458.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:38.396Z,1513239458.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:38.748Z,1513239458.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:38.763Z,1513239458.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:39.162Z,1513239459.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:39.195Z,1513239459.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:39.558Z,1513239459.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:39.574Z,1513239459.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:39.958Z,1513239459.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:39.987Z,1513239459.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:40.357Z,1513239460.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:40.380Z,1513239460.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:40.757Z,1513239460.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:40.779Z,1513239460.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:41.166Z,1513239461.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:41.207Z,1513239461.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:41.539Z,1513239461.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:41.573Z,1513239461.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:41.963Z,1513239461.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:41.977Z,1513239461.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:42.367Z,1513239462.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:42.387Z,1513239462.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:42.789Z,1513239462.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:42.880Z,1513239462.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:43.170Z,1513239463.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:43.193Z,1513239463.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:43.552Z,1513239463.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:43.587Z,1513239463.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:43.952Z,1513239463.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:43.975Z,1513239463.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:44.386Z,1513239464.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:44.411Z,1513239464.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:44.747Z,1513239464.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:44.799Z,1513239464.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:45.158Z,1513239465.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:45.183Z,1513239465.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:45.566Z,1513239465.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:45.594Z,1513239465.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:45.971Z,1513239465.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:46.030Z,1513239466.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:46.353Z,1513239466.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:46.380Z,1513239466.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:46.754Z,1513239466.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:46.773Z,1513239466.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:47.152Z,1513239467.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:47.203Z,1513239467.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:47.551Z,1513239467.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:47.572Z,1513239467.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:47.954Z,1513239467.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:47.999Z,1513239467.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:48.356Z,1513239468.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:48.392Z,1513239468.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:48.765Z,1513239468.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:48.780Z,1513239468.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:49.167Z,1513239469.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:49.194Z,1513239469.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:49.561Z,1513239469.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:49.576Z,1513239469.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:49.944Z,1513239469.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:49.979Z,1513239469.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:50.346Z,1513239470.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:50.374Z,1513239470.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:50.763Z,1513239470.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:50.798Z,1513239470.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:51.152Z,1513239471.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:51.177Z,1513239471.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:51.569Z,1513239471.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:51.583Z,1513239471.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:51.954Z,1513239471.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:51.981Z,1513239471.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:52.347Z,1513239472.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:52.382Z,1513239472.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:52.748Z,1513239472.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:52.773Z,1513239472.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:53.146Z,1513239473.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:53.161Z,1513239473.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:53.557Z,1513239473.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:53.580Z,1513239473.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:54.004Z,1513239474.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:54.040Z,1513239474.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:54.363Z,1513239474.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:54.391Z,1513239474.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:54.759Z,1513239474.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:54.790Z,1513239474.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:55.154Z,1513239475.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:55.169Z,1513239475.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:55.539Z,1513239475.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:55.574Z,1513239475.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:55.952Z,1513239475.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:55.971Z,1513239475.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:56.357Z,1513239476.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:56.396Z,1513239476.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:56.754Z,1513239476.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:56.769Z,1513239476.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:57.173Z,1513239477.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:57.196Z,1513239477.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:57.559Z,1513239477.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:57.587Z,1513239477.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:57.968Z,1513239477.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:57.984Z,1513239477.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:58.351Z,1513239478.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:58.374Z,1513239478.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:58.749Z,1513239478.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:58.771Z,1513239478.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:59.153Z,1513239479.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:59.168Z,1513239479.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:59.557Z,1513239479.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:59.572Z,1513239479.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:17:59.955Z,1513239479.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:17:59.970Z,1513239479.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:00.387Z,1513239480.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:00.418Z,1513239480.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:00.769Z,1513239480.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:00.784Z,1513239480.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:01.170Z,1513239481.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:01.191Z,1513239481.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:01.538Z,1513239481.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:01.570Z,1513239481.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:01.944Z,1513239481.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:01.980Z,1513239481.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:02.347Z,1513239482.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:02.356Z,1513239482.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x16789 got:0x56904
2017-12-14T08:18:02.395Z,1513239482.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:02.743Z,1513239482.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:02.782Z,1513239482.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:03.162Z,1513239483.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:03.195Z,1513239483.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:03.572Z,1513239483.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:03.587Z,1513239483.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:03.966Z,1513239483.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:03.999Z,1513239483.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:04.350Z,1513239484.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:04.365Z,1513239484.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:04.752Z,1513239484.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:04.768Z,1513239484.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:05.140Z,1513239485.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:05.175Z,1513239485.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:05.540Z,1513239485.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:05.603Z,1513239485.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:05.952Z,1513239485.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:05.981Z,1513239485.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:06.370Z,1513239486.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:06.385Z,1513239486.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:06.793Z,1513239486.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:06.836Z,1513239486.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:07.179Z,1513239487.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:07.243Z,1513239487.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:07.549Z,1513239487.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:07.564Z,1513239487.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:07.953Z,1513239487.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:07.968Z,1513239487.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:08.347Z,1513239488.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:08.369Z,1513239488.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:08.736Z,1513239488.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:08.852Z,1513239488.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:09.175Z,1513239489.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:09.190Z,1513239489.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:09.564Z,1513239489.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:09.579Z,1513239489.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:09.978Z,1513239489.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:10.031Z,1513239490.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:10.353Z,1513239490.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:10.380Z,1513239490.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:10.747Z,1513239490.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:10.883Z,1513239490.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:11.147Z,1513239491.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:11.187Z,1513239491.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:11.548Z,1513239491.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:11.593Z,1513239491.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:11.954Z,1513239491.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:11.968Z,1513239491.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:12.364Z,1513239492.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:12.390Z,1513239492.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:12.766Z,1513239492.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:12.792Z,1513239492.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:13.186Z,1513239493.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:13.211Z,1513239493.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:13.549Z,1513239493.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:13.578Z,1513239493.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:13.953Z,1513239493.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:13.968Z,1513239493.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:14.353Z,1513239494.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:14.367Z,1513239494.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:14.747Z,1513239494.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:14.770Z,1513239494.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:15.155Z,1513239495.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:15.176Z,1513239495.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:15.561Z,1513239495.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:15.575Z,1513239495.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:15.949Z,1513239495.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:15.983Z,1513239495.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:16.379Z,1513239496.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:16.414Z,1513239496.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:16.740Z,1513239496.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:16.779Z,1513239496.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:17.143Z,1513239497.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:17.188Z,1513239497.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:17.547Z,1513239497.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:17.573Z,1513239497.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:17.943Z,1513239497.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:17.975Z,1513239497.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:18.368Z,1513239498.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:18.375Z,1513239498.375 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T08:18:18.404Z,1513239498.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:18.776Z,1513239498.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:18.791Z,1513239498.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:19.171Z,1513239499.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:19.230Z,1513239499.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:19.540Z,1513239499.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:19.583Z,1513239499.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:19.951Z,1513239499.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:19.971Z,1513239499.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:20.357Z,1513239500.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:20.372Z,1513239500.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:20.750Z,1513239500.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:20.779Z,1513239500.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:21.162Z,1513239501.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:21.177Z,1513239501.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:21.562Z,1513239501.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:21.578Z,1513239501.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:21.960Z,1513239501.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:22.020Z,1513239502.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:22.343Z,1513239502.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:22.385Z,1513239502.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:22.773Z,1513239502.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:22.890Z,1513239502.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:23.157Z,1513239503.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:23.194Z,1513239503.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:23.552Z,1513239503.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:23.571Z,1513239503.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:23.954Z,1513239503.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:23.970Z,1513239503.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:24.357Z,1513239504.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:24.402Z,1513239504.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:24.759Z,1513239504.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:24.854Z,1513239504.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:25.172Z,1513239505.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:25.195Z,1513239505.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:25.548Z,1513239505.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:25.575Z,1513239505.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:25.579Z,1513239505.579 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:13:25.5Z
2017-12-14T08:18:25.579Z,1513239505.579 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T08:18:25.579Z,1513239505.579 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T08:18:25.939Z,1513239505.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:25.980Z,1513239505.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:26.818Z,1513239506.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:26.832Z,1513239506.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:26.938Z,1513239506.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:26.982Z,1513239506.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:30.597Z,1513239510.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:30.621Z,1513239510.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:30.702Z,1513239510.702 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0180.lzma
2017-12-14T08:18:30.742Z,1513239510.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:30.773Z,1513239510.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:31.086Z,1513239511.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:31.158Z,1513239511.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:31.452Z,1513239511.452 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0180.lzma.bak
2017-12-14T08:18:31.452Z,1513239511.452 [DataOverHttps](INFO): SBD MOMSN=5438334
2017-12-14T08:18:31.502Z,1513239511.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:31.520Z,1513239511.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:33.432Z,1513239513.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:33.498Z,1513239513.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:33.594Z,1513239513.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:33.609Z,1513239513.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:37.364Z,1513239517.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:37.412Z,1513239517.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:37.523Z,1513239517.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:37.558Z,1513239517.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:37.878Z,1513239517.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:37.902Z,1513239517.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:38.272Z,1513239518.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:38.306Z,1513239518.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:38.667Z,1513239518.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:38.682Z,1513239518.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:39.099Z,1513239519.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:39.119Z,1513239519.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:42.645Z,1513239522.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:42.659Z,1513239522.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:42.744Z,1513239522.744 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0181.lzma
2017-12-14T08:18:42.787Z,1513239522.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:42.815Z,1513239522.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:43.125Z,1513239523.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:43.144Z,1513239523.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:43.487Z,1513239523.487 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0181.lzma.bak
2017-12-14T08:18:43.488Z,1513239523.488 [DataOverHttps](INFO): SBD MOMSN=5438336
2017-12-14T08:18:43.530Z,1513239523.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:43.573Z,1513239523.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:44.729Z,1513239524.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:44.745Z,1513239524.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:44.749Z,1513239524.749 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T08:18:44.749Z,1513239524.749 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T08:18:44.749Z,1513239524.749 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T08:18:44.864Z,1513239524.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:44.895Z,1513239524.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:48.637Z,1513239528.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:48.688Z,1513239528.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:48.794Z,1513239528.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:48.825Z,1513239528.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:49.142Z,1513239529.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:49.175Z,1513239529.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:49.549Z,1513239529.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:49.581Z,1513239529.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:49.943Z,1513239529.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:49.983Z,1513239529.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:50.359Z,1513239530.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:50.374Z,1513239530.374 [PNI_TCM](ERROR): CRC does not match. Expected:0x23692 got:0x65048
2017-12-14T08:18:50.392Z,1513239530.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:50.756Z,1513239530.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:50.783Z,1513239530.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:51.151Z,1513239531.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:51.180Z,1513239531.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:51.547Z,1513239531.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:51.569Z,1513239531.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:51.951Z,1513239531.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:51.971Z,1513239531.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:52.346Z,1513239532.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:52.368Z,1513239532.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:52.749Z,1513239532.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:52.763Z,1513239532.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:53.164Z,1513239533.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:53.187Z,1513239533.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:53.568Z,1513239533.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:53.584Z,1513239533.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:53.961Z,1513239533.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:53.976Z,1513239533.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:54.339Z,1513239534.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:54.367Z,1513239534.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:54.735Z,1513239534.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:54.798Z,1513239534.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:55.135Z,1513239535.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:55.171Z,1513239535.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:55.540Z,1513239535.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:55.574Z,1513239535.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:55.944Z,1513239535.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:55.976Z,1513239535.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:56.369Z,1513239536.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:56.392Z,1513239536.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:56.774Z,1513239536.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:56.795Z,1513239536.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:57.161Z,1513239537.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:57.176Z,1513239537.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:57.545Z,1513239537.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:57.573Z,1513239537.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:57.968Z,1513239537.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:58.026Z,1513239538.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:58.348Z,1513239538.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:58.375Z,1513239538.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:58.739Z,1513239538.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:58.771Z,1513239538.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:59.169Z,1513239539.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:59.183Z,1513239539.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:59.574Z,1513239539.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:59.590Z,1513239539.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:18:59.955Z,1513239539.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:18:59.969Z,1513239539.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:00.341Z,1513239540.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:00.357Z,1513239540.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:00.744Z,1513239540.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:00.788Z,1513239540.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:01.169Z,1513239541.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:01.239Z,1513239541.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:01.537Z,1513239541.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:01.559Z,1513239541.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:01.943Z,1513239541.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:01.991Z,1513239541.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:02.354Z,1513239542.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:02.369Z,1513239542.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:02.751Z,1513239542.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:02.803Z,1513239542.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:03.151Z,1513239543.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:03.212Z,1513239543.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:03.537Z,1513239543.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:03.553Z,1513239543.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:03.946Z,1513239543.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:03.960Z,1513239543.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:04.359Z,1513239544.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:04.383Z,1513239544.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:04.735Z,1513239544.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:04.775Z,1513239544.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:05.152Z,1513239545.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:05.159Z,1513239545.159 [PNI_TCM](ERROR): CRC does not match. Expected:0x13833 got:0x19469
2017-12-14T08:19:05.187Z,1513239545.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:05.544Z,1513239545.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:05.567Z,1513239545.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:05.953Z,1513239545.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:05.975Z,1513239545.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:06.340Z,1513239546.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:06.362Z,1513239546.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:06.746Z,1513239546.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:06.761Z,1513239546.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:07.138Z,1513239547.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:07.156Z,1513239547.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:07.543Z,1513239547.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:07.578Z,1513239547.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:07.935Z,1513239547.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:07.975Z,1513239547.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:08.353Z,1513239548.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:08.360Z,1513239548.360 [PNI_TCM](ERROR): CRC does not match. Expected:0x26294 got:0x32
2017-12-14T08:19:08.387Z,1513239548.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:08.750Z,1513239548.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:08.765Z,1513239548.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:09.153Z,1513239549.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:09.173Z,1513239549.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:09.539Z,1513239549.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:09.561Z,1513239549.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:09.940Z,1513239549.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:09.955Z,1513239549.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:10.343Z,1513239550.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:10.395Z,1513239550.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:10.736Z,1513239550.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:10.770Z,1513239550.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:10.797Z,1513239550.797 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:19:11.159Z,1513239551.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:11.246Z,1513239551.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:11.552Z,1513239551.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:11.567Z,1513239551.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:11.951Z,1513239551.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:11.965Z,1513239551.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:12.359Z,1513239552.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:12.542Z,1513239552.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:12.739Z,1513239552.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:12.762Z,1513239552.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:13.140Z,1513239553.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:13.155Z,1513239553.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:13.542Z,1513239553.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:13.557Z,1513239553.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:13.933Z,1513239553.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:13.967Z,1513239553.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:14.381Z,1513239554.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:14.396Z,1513239554.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:14.753Z,1513239554.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:14.768Z,1513239554.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:15.169Z,1513239555.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:15.214Z,1513239555.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:15.536Z,1513239555.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:15.564Z,1513239555.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:15.930Z,1513239555.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:15.953Z,1513239555.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:16.345Z,1513239556.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:16.360Z,1513239556.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:16.745Z,1513239556.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:16.760Z,1513239556.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:17.155Z,1513239557.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:17.173Z,1513239557.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:17.555Z,1513239557.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:17.571Z,1513239557.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:17.953Z,1513239557.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:17.968Z,1513239557.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:18.343Z,1513239558.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:18.359Z,1513239558.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:18.856Z,1513239558.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:18.892Z,1513239558.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:19.138Z,1513239559.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:19.161Z,1513239559.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:19.546Z,1513239559.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:19.561Z,1513239559.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:19.937Z,1513239559.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:19.954Z,1513239559.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:20.074Z,1513239560.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:20.365Z,1513239560.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:20.380Z,1513239560.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:20.765Z,1513239560.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:20.780Z,1513239560.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:20.870Z,1513239560.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:21.153Z,1513239561.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:21.169Z,1513239561.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:21.273Z,1513239561.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:21.543Z,1513239561.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:21.559Z,1513239561.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:21.935Z,1513239561.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:21.978Z,1513239561.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:22.336Z,1513239562.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:22.373Z,1513239562.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:22.734Z,1513239562.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:22.791Z,1513239562.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:23.147Z,1513239563.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:23.240Z,1513239563.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:23.560Z,1513239563.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:23.587Z,1513239563.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:23.953Z,1513239563.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:24.010Z,1513239564.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:24.342Z,1513239564.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:24.383Z,1513239564.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:24.742Z,1513239564.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:24.803Z,1513239564.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:25.136Z,1513239565.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:25.178Z,1513239565.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:25.536Z,1513239565.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:25.599Z,1513239565.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:25.936Z,1513239565.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:25.966Z,1513239565.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:26.348Z,1513239566.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:26.399Z,1513239566.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:26.755Z,1513239566.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:26.802Z,1513239566.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:27.159Z,1513239567.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:27.183Z,1513239567.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:27.555Z,1513239567.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:27.570Z,1513239567.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:27.946Z,1513239567.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:27.973Z,1513239567.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:28.336Z,1513239568.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:28.375Z,1513239568.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:28.757Z,1513239568.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:28.772Z,1513239568.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:29.159Z,1513239569.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:29.192Z,1513239569.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:29.568Z,1513239569.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:29.584Z,1513239569.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:29.946Z,1513239569.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:29.984Z,1513239569.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:30.332Z,1513239570.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:30.371Z,1513239570.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:30.740Z,1513239570.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:30.779Z,1513239570.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:31.148Z,1513239571.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:31.178Z,1513239571.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:31.544Z,1513239571.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:31.576Z,1513239571.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:31.936Z,1513239571.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:31.950Z,1513239571.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x2728 got:0x53825
2017-12-14T08:19:31.983Z,1513239571.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:32.354Z,1513239572.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:32.378Z,1513239572.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:32.753Z,1513239572.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:32.777Z,1513239572.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:33.152Z,1513239573.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:33.211Z,1513239573.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:33.552Z,1513239573.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:33.567Z,1513239573.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:33.953Z,1513239573.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:33.969Z,1513239573.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:34.081Z,1513239574.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:34.354Z,1513239574.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:34.369Z,1513239574.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:34.748Z,1513239574.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:34.770Z,1513239574.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:34.877Z,1513239574.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:35.156Z,1513239575.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:35.176Z,1513239575.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:35.281Z,1513239575.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:35.557Z,1513239575.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:35.576Z,1513239575.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:35.954Z,1513239575.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:35.975Z,1513239575.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:36.344Z,1513239576.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:36.383Z,1513239576.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:36.739Z,1513239576.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:36.818Z,1513239576.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x49020 got:0x15765
2017-12-14T08:19:36.847Z,1513239576.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:37.142Z,1513239577.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:37.171Z,1513239577.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:37.552Z,1513239577.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:37.566Z,1513239577.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:37.954Z,1513239577.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:37.973Z,1513239577.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:38.360Z,1513239578.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:38.384Z,1513239578.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:38.763Z,1513239578.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:38.777Z,1513239578.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:39.151Z,1513239579.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:39.174Z,1513239579.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:39.551Z,1513239579.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:39.572Z,1513239579.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:39.935Z,1513239579.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:39.969Z,1513239579.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:40.355Z,1513239580.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:40.374Z,1513239580.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:40.759Z,1513239580.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:40.777Z,1513239580.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:41.158Z,1513239581.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:41.178Z,1513239581.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:41.567Z,1513239581.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:41.586Z,1513239581.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:41.963Z,1513239581.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:41.977Z,1513239581.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:42.348Z,1513239582.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:42.377Z,1513239582.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:42.378Z,1513239582.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:42.379Z,1513239582.379 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 156
2017-12-14T08:19:42.379Z,1513239582.379 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:19:42.381Z,1513239582.381 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:42.381Z,1513239582.381 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2017-12-14T08:19:42.381Z,1513239582.381 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:19:42.405Z,1513239582.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:19:42.405Z,1513239582.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:19:42.741Z,1513239582.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:42.786Z,1513239582.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:42.786Z,1513239582.786 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156
2017-12-14T08:19:42.786Z,1513239582.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:19:42.799Z,1513239582.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:19:42.799Z,1513239582.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:19:42.799Z,1513239582.799 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 156
2017-12-14T08:19:42.799Z,1513239582.799 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:19:42.800Z,1513239582.800 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2017-12-14T08:19:43.150Z,1513239583.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:43.182Z,1513239583.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:19:43.182Z,1513239583.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:19:43.182Z,1513239583.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:19:43.183Z,1513239583.183 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:19:43.183Z,1513239583.183 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:19:43.183Z,1513239583.183 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:19:43.195Z,1513239583.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:19:43.195Z,1513239583.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156
2017-12-14T08:19:43.554Z,1513239583.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:43.586Z,1513239583.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:19:43.587Z,1513239583.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:19:43.587Z,1513239583.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:19:43.951Z,1513239583.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:43.978Z,1513239583.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:44.362Z,1513239584.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:44.385Z,1513239584.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:44.766Z,1513239584.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:44.791Z,1513239584.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:45.159Z,1513239585.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:45.231Z,1513239585.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:48.058Z,1513239588.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:48.665Z,1513239588.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:48.698Z,1513239588.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:48.837Z,1513239588.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:48.855Z,1513239588.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:48.920Z,1513239588.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:49.187Z,1513239589.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:49.231Z,1513239589.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:49.269Z,1513239589.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:49.589Z,1513239589.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:49.631Z,1513239589.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:49.986Z,1513239589.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:50.007Z,1513239590.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:50.373Z,1513239590.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:50.403Z,1513239590.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:50.768Z,1513239590.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:50.795Z,1513239590.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:51.171Z,1513239591.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:51.191Z,1513239591.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:51.578Z,1513239591.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:51.599Z,1513239591.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:51.974Z,1513239591.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:51.988Z,1513239591.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:52.403Z,1513239592.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:52.434Z,1513239592.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:52.792Z,1513239592.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:52.806Z,1513239592.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:53.200Z,1513239593.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:53.215Z,1513239593.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:53.564Z,1513239593.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:53.579Z,1513239593.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:53.979Z,1513239593.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:54.006Z,1513239594.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:54.377Z,1513239594.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:54.391Z,1513239594.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:54.776Z,1513239594.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:54.791Z,1513239594.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:55.186Z,1513239595.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:55.220Z,1513239595.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:55.590Z,1513239595.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:55.616Z,1513239595.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:55.979Z,1513239595.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:55.993Z,1513239595.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:56.374Z,1513239596.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:56.390Z,1513239596.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:56.772Z,1513239596.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:56.788Z,1513239596.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:57.172Z,1513239597.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:57.206Z,1513239597.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:57.581Z,1513239597.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:57.596Z,1513239597.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:57.980Z,1513239597.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:58.021Z,1513239598.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:58.382Z,1513239598.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:58.397Z,1513239598.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:58.819Z,1513239598.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:58.853Z,1513239598.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:59.190Z,1513239599.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:59.204Z,1513239599.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:59.579Z,1513239599.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:59.594Z,1513239599.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:19:59.964Z,1513239599.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:19:59.995Z,1513239599.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:00.367Z,1513239600.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:00.394Z,1513239600.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:00.767Z,1513239600.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:00.858Z,1513239600.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:01.181Z,1513239601.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:01.212Z,1513239601.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:01.582Z,1513239601.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:01.618Z,1513239601.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:01.975Z,1513239601.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:02.040Z,1513239602.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:02.385Z,1513239602.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:02.399Z,1513239602.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:02.782Z,1513239602.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:02.864Z,1513239602.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:03.165Z,1513239603.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:03.180Z,1513239603.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:03.568Z,1513239603.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:03.584Z,1513239603.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:03.975Z,1513239603.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:04.014Z,1513239604.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:04.382Z,1513239604.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:04.408Z,1513239604.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:04.793Z,1513239604.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:04.819Z,1513239604.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:05.195Z,1513239605.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:05.227Z,1513239605.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:05.590Z,1513239605.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:05.605Z,1513239605.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:05.983Z,1513239605.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:05.998Z,1513239605.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:06.376Z,1513239606.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:06.391Z,1513239606.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:06.790Z,1513239606.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:06.805Z,1513239606.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:07.191Z,1513239607.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:07.211Z,1513239607.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:07.585Z,1513239607.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:07.608Z,1513239607.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:07.982Z,1513239607.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:08.015Z,1513239608.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:08.382Z,1513239608.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:08.421Z,1513239608.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:08.777Z,1513239608.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:08.792Z,1513239608.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:09.180Z,1513239609.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:09.196Z,1513239609.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:09.564Z,1513239609.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:09.596Z,1513239609.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:09.968Z,1513239609.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:10.046Z,1513239610.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:10.387Z,1513239610.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:10.482Z,1513239610.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:10.800Z,1513239610.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:10.816Z,1513239610.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:11.177Z,1513239611.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:11.212Z,1513239611.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:11.569Z,1513239611.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:11.619Z,1513239611.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:11.967Z,1513239611.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:12.002Z,1513239612.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:12.368Z,1513239612.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:12.415Z,1513239612.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:12.768Z,1513239612.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:12.804Z,1513239612.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:13.179Z,1513239613.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:13.215Z,1513239613.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:13.585Z,1513239613.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:13.615Z,1513239613.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:13.974Z,1513239613.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:13.989Z,1513239613.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:14.370Z,1513239614.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:14.389Z,1513239614.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:14.789Z,1513239614.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:14.892Z,1513239614.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:15.172Z,1513239615.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:15.194Z,1513239615.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:15.578Z,1513239615.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:15.593Z,1513239615.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:15.973Z,1513239615.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:15.987Z,1513239615.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:16.380Z,1513239616.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:16.399Z,1513239616.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:16.789Z,1513239616.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:16.930Z,1513239616.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:17.190Z,1513239617.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:17.215Z,1513239617.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:17.570Z,1513239617.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:17.584Z,1513239617.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:17.979Z,1513239617.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:17.995Z,1513239617.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:18.377Z,1513239618.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:18.399Z,1513239618.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:18.772Z,1513239618.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:18.799Z,1513239618.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:19.178Z,1513239619.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:19.193Z,1513239619.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:19.593Z,1513239619.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:19.625Z,1513239619.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:19.976Z,1513239619.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:19.995Z,1513239619.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:20.371Z,1513239620.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:20.392Z,1513239620.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:20.772Z,1513239620.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:20.828Z,1513239620.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:21.187Z,1513239621.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:21.211Z,1513239621.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:21.568Z,1513239621.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:21.603Z,1513239621.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:21.966Z,1513239621.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:21.993Z,1513239621.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:22.388Z,1513239622.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:22.403Z,1513239622.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:22.809Z,1513239622.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:22.846Z,1513239622.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:23.191Z,1513239623.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:23.211Z,1513239623.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:23.568Z,1513239623.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:23.596Z,1513239623.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:23.964Z,1513239623.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:23.979Z,1513239623.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:24.412Z,1513239624.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:24.517Z,1513239624.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:24.775Z,1513239624.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:24.790Z,1513239624.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:25.191Z,1513239625.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:25.224Z,1513239625.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:25.577Z,1513239625.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:25.592Z,1513239625.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:25.978Z,1513239625.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:26.003Z,1513239626.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:26.380Z,1513239626.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:26.395Z,1513239626.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:26.778Z,1513239626.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:26.792Z,1513239626.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:27.172Z,1513239627.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:27.193Z,1513239627.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:27.583Z,1513239627.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:27.598Z,1513239627.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:27.985Z,1513239627.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:28.000Z,1513239628.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:28.390Z,1513239628.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:28.405Z,1513239628.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:28.787Z,1513239628.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:28.884Z,1513239628.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:29.188Z,1513239629.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:29.203Z,1513239629.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:29.567Z,1513239629.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:29.603Z,1513239629.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:29.965Z,1513239629.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:30.001Z,1513239630.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:30.364Z,1513239630.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:30.379Z,1513239630.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:30.845Z,1513239630.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:30.891Z,1513239630.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:31.186Z,1513239631.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:31.215Z,1513239631.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:31.595Z,1513239631.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:31.610Z,1513239631.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:31.979Z,1513239631.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:32.011Z,1513239632.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:32.379Z,1513239632.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:32.404Z,1513239632.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:32.779Z,1513239632.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:32.873Z,1513239632.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:33.178Z,1513239633.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:33.199Z,1513239633.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:33.567Z,1513239633.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:33.615Z,1513239633.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:33.975Z,1513239633.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:33.990Z,1513239633.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:34.382Z,1513239634.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:34.435Z,1513239634.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:34.791Z,1513239634.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:34.805Z,1513239634.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:35.186Z,1513239635.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:35.201Z,1513239635.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:35.571Z,1513239635.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:35.598Z,1513239635.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:35.975Z,1513239635.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:35.991Z,1513239635.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:36.383Z,1513239636.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:36.397Z,1513239636.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:36.778Z,1513239636.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:36.793Z,1513239636.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:37.182Z,1513239637.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:37.211Z,1513239637.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:37.589Z,1513239637.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:37.605Z,1513239637.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:37.982Z,1513239637.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:37.998Z,1513239637.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:38.363Z,1513239638.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:38.389Z,1513239638.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:38.791Z,1513239638.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:38.806Z,1513239638.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:39.167Z,1513239639.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:39.203Z,1513239639.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:39.571Z,1513239639.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:39.598Z,1513239639.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:39.963Z,1513239639.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:39.995Z,1513239639.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:40.386Z,1513239640.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:40.426Z,1513239640.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:40.800Z,1513239640.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:40.814Z,1513239640.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:41.190Z,1513239641.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:41.216Z,1513239641.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:41.565Z,1513239641.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:41.579Z,1513239641.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:41.977Z,1513239641.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:41.991Z,1513239641.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:42.372Z,1513239642.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:42.387Z,1513239642.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:42.767Z,1513239642.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:42.863Z,1513239642.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:43.180Z,1513239643.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:43.207Z,1513239643.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:43.587Z,1513239643.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:43.602Z,1513239643.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:43.995Z,1513239643.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:44.011Z,1513239644.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:44.365Z,1513239644.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:44.392Z,1513239644.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:44.765Z,1513239644.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:44.838Z,1513239644.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:45.171Z,1513239645.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:45.206Z,1513239645.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:48.683Z,1513239648.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:48.698Z,1513239648.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:48.801Z,1513239648.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:48.824Z,1513239648.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:49.177Z,1513239649.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:49.207Z,1513239649.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:49.573Z,1513239649.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:49.606Z,1513239649.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:49.970Z,1513239649.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:50.019Z,1513239650.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:50.361Z,1513239650.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:50.376Z,1513239650.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:50.762Z,1513239650.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:50.783Z,1513239650.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:51.162Z,1513239651.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:51.176Z,1513239651.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:51.565Z,1513239651.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:51.580Z,1513239651.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:51.964Z,1513239651.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:51.983Z,1513239651.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:52.367Z,1513239652.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:52.387Z,1513239652.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:52.765Z,1513239652.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:52.781Z,1513239652.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:53.185Z,1513239653.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:53.208Z,1513239653.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:53.562Z,1513239653.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:53.579Z,1513239653.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:54.016Z,1513239654.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:54.036Z,1513239654.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:54.365Z,1513239654.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:54.380Z,1513239654.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:54.774Z,1513239654.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:54.789Z,1513239654.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:55.164Z,1513239655.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:55.239Z,1513239655.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:55.575Z,1513239655.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:55.595Z,1513239655.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:55.974Z,1513239655.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:56.029Z,1513239656.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:56.386Z,1513239656.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:56.405Z,1513239656.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:56.784Z,1513239656.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:56.878Z,1513239656.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:57.160Z,1513239657.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:57.176Z,1513239657.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:57.553Z,1513239657.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:57.567Z,1513239657.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:57.963Z,1513239657.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:57.978Z,1513239657.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:58.373Z,1513239658.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:58.404Z,1513239658.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:58.773Z,1513239658.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:58.856Z,1513239658.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:59.178Z,1513239659.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:59.204Z,1513239659.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:59.564Z,1513239659.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:59.613Z,1513239659.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:20:59.960Z,1513239659.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:20:59.988Z,1513239659.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:00.361Z,1513239660.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:00.396Z,1513239660.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:00.757Z,1513239660.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:00.776Z,1513239660.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:01.169Z,1513239661.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:01.192Z,1513239661.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:01.570Z,1513239661.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:01.587Z,1513239661.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:01.966Z,1513239661.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:01.981Z,1513239661.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:02.365Z,1513239662.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:02.379Z,1513239662.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:02.810Z,1513239662.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:02.841Z,1513239662.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:03.152Z,1513239663.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:03.179Z,1513239663.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:03.562Z,1513239663.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:03.576Z,1513239663.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:03.963Z,1513239663.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:03.978Z,1513239663.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:04.371Z,1513239664.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:04.399Z,1513239664.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:04.774Z,1513239664.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:04.789Z,1513239664.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:05.174Z,1513239665.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:05.231Z,1513239665.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:05.555Z,1513239665.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:05.591Z,1513239665.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:05.948Z,1513239665.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:06.025Z,1513239666.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:06.354Z,1513239666.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:06.382Z,1513239666.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:06.752Z,1513239666.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:06.787Z,1513239666.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:07.176Z,1513239667.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:07.328Z,1513239667.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:07.577Z,1513239667.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:07.592Z,1513239667.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:07.973Z,1513239667.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:07.988Z,1513239667.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:08.359Z,1513239668.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:08.382Z,1513239668.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:08.764Z,1513239668.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:08.788Z,1513239668.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:09.188Z,1513239669.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:09.231Z,1513239669.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:09.552Z,1513239669.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:09.587Z,1513239669.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:09.952Z,1513239669.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:09.980Z,1513239669.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:10.379Z,1513239670.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:10.399Z,1513239670.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:10.776Z,1513239670.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:10.881Z,1513239670.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:11.164Z,1513239671.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:11.202Z,1513239671.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:11.556Z,1513239671.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:11.591Z,1513239671.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:11.957Z,1513239671.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:11.999Z,1513239671.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:12.383Z,1513239672.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:12.403Z,1513239672.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:12.759Z,1513239672.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:12.831Z,1513239672.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:13.170Z,1513239673.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:13.199Z,1513239673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:13.574Z,1513239673.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:13.598Z,1513239673.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:13.973Z,1513239673.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:14.003Z,1513239674.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:14.360Z,1513239674.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:14.376Z,1513239674.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:14.764Z,1513239674.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:14.780Z,1513239674.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:15.161Z,1513239675.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:15.176Z,1513239675.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:15.594Z,1513239675.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:15.652Z,1513239675.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:15.958Z,1513239675.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:15.987Z,1513239675.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:16.366Z,1513239676.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:16.381Z,1513239676.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:16.765Z,1513239676.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:16.780Z,1513239676.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:17.168Z,1513239677.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:17.211Z,1513239677.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:17.559Z,1513239677.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:17.612Z,1513239677.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:17.970Z,1513239677.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:17.997Z,1513239677.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:18.368Z,1513239678.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:18.383Z,1513239678.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:18.822Z,1513239678.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:18.883Z,1513239678.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:19.175Z,1513239679.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:19.219Z,1513239679.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:19.577Z,1513239679.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:19.663Z,1513239679.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:19.975Z,1513239679.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:19.996Z,1513239679.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:20.389Z,1513239680.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:20.433Z,1513239680.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:20.761Z,1513239680.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:20.795Z,1513239680.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:21.171Z,1513239681.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:21.195Z,1513239681.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:21.555Z,1513239681.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:21.604Z,1513239681.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:21.952Z,1513239681.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:22.048Z,1513239682.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:22.368Z,1513239682.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:22.455Z,1513239682.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:22.797Z,1513239682.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:22.855Z,1513239682.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:23.171Z,1513239683.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:23.212Z,1513239683.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:23.569Z,1513239683.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:23.619Z,1513239683.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:23.963Z,1513239683.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:24.016Z,1513239684.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:24.366Z,1513239684.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:24.426Z,1513239684.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:24.763Z,1513239684.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:24.791Z,1513239684.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:25.175Z,1513239685.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:25.195Z,1513239685.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:25.590Z,1513239685.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:25.646Z,1513239685.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:25.991Z,1513239685.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:26.012Z,1513239686.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:26.360Z,1513239686.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:26.409Z,1513239686.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:26.748Z,1513239686.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:26.786Z,1513239686.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:27.172Z,1513239687.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:27.195Z,1513239687.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:27.582Z,1513239687.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:27.598Z,1513239687.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:27.952Z,1513239687.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:28.038Z,1513239688.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:28.379Z,1513239688.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:28.427Z,1513239688.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:28.771Z,1513239688.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:28.830Z,1513239688.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:29.169Z,1513239689.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:29.226Z,1513239689.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:29.574Z,1513239689.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:29.617Z,1513239689.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:29.951Z,1513239689.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:30.012Z,1513239690.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:30.354Z,1513239690.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:30.406Z,1513239690.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:30.766Z,1513239690.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:30.811Z,1513239690.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:31.172Z,1513239691.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:31.192Z,1513239691.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:31.580Z,1513239691.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:31.619Z,1513239691.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:31.971Z,1513239691.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:32.031Z,1513239692.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:32.372Z,1513239692.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:32.386Z,1513239692.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:32.751Z,1513239692.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:32.779Z,1513239692.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:33.155Z,1513239693.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:33.172Z,1513239693.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:33.556Z,1513239693.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:33.571Z,1513239693.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:33.954Z,1513239693.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:33.990Z,1513239693.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:34.387Z,1513239694.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:34.426Z,1513239694.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:34.776Z,1513239694.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:34.854Z,1513239694.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:35.198Z,1513239695.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:35.221Z,1513239695.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:35.579Z,1513239695.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:35.623Z,1513239695.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:35.958Z,1513239695.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:36.025Z,1513239696.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:36.376Z,1513239696.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:36.408Z,1513239696.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:36.798Z,1513239696.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:36.845Z,1513239696.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:37.212Z,1513239697.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:37.260Z,1513239697.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:37.567Z,1513239697.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:37.597Z,1513239697.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:37.970Z,1513239697.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:37.999Z,1513239697.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:38.375Z,1513239698.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:38.430Z,1513239698.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:38.775Z,1513239698.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:38.886Z,1513239698.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:39.180Z,1513239699.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:39.198Z,1513239699.198 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T08:21:39.198Z,1513239699.198 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:21:39.198Z,1513239699.198 [BPC1](ERROR): Data Fault
2017-12-14T08:21:39.210Z,1513239699.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:39.264Z,1513239699.264 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:21:39.570Z,1513239699.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:39.599Z,1513239699.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:39.960Z,1513239699.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:40.002Z,1513239700.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:40.398Z,1513239700.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:40.419Z,1513239700.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:40.478Z,1513239700.478 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:21:40.478Z,1513239700.478 [BPC1] No Fault, FailCount= 1
2017-12-14T08:21:40.775Z,1513239700.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:40.956Z,1513239700.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:41.178Z,1513239701.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:41.237Z,1513239701.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:41.578Z,1513239701.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:41.606Z,1513239701.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:41.971Z,1513239701.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:42.022Z,1513239702.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:42.361Z,1513239702.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:42.403Z,1513239702.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:42.774Z,1513239702.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:42.810Z,1513239702.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:43.175Z,1513239703.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:43.213Z,1513239703.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:43.568Z,1513239703.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:43.618Z,1513239703.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:43.968Z,1513239703.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:44.008Z,1513239704.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:44.369Z,1513239704.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:44.410Z,1513239704.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:44.753Z,1513239704.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:44.783Z,1513239704.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:45.166Z,1513239705.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:45.187Z,1513239705.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:45.564Z,1513239705.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:45.579Z,1513239705.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:49.093Z,1513239709.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:49.136Z,1513239709.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:49.242Z,1513239709.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:49.269Z,1513239709.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:49.633Z,1513239709.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:49.655Z,1513239709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:50.034Z,1513239710.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:50.055Z,1513239710.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:50.407Z,1513239710.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:50.443Z,1513239710.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:50.811Z,1513239710.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:50.835Z,1513239710.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:51.211Z,1513239711.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:51.239Z,1513239711.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:51.634Z,1513239711.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:51.659Z,1513239711.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:52.007Z,1513239712.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:52.024Z,1513239712.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:52.421Z,1513239712.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:52.438Z,1513239712.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:52.832Z,1513239712.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:52.888Z,1513239712.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:53.220Z,1513239713.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:53.235Z,1513239713.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:53.608Z,1513239713.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:53.623Z,1513239713.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:54.005Z,1513239714.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:54.020Z,1513239714.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:54.409Z,1513239714.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:54.425Z,1513239714.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:54.817Z,1513239714.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:54.879Z,1513239714.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:55.223Z,1513239715.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:55.255Z,1513239715.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:55.623Z,1513239715.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:55.643Z,1513239715.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:56.030Z,1513239716.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:56.051Z,1513239716.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:56.410Z,1513239716.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:56.513Z,1513239716.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:56.809Z,1513239716.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:56.823Z,1513239716.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:57.208Z,1513239717.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:57.224Z,1513239717.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:57.609Z,1513239717.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:57.631Z,1513239717.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:58.011Z,1513239718.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:58.026Z,1513239718.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:58.426Z,1513239718.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:58.441Z,1513239718.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:58.823Z,1513239718.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:58.843Z,1513239718.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:59.222Z,1513239719.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:59.243Z,1513239719.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:21:59.610Z,1513239719.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:21:59.625Z,1513239719.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:00.059Z,1513239720.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:00.074Z,1513239720.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:00.410Z,1513239720.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:00.425Z,1513239720.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:00.811Z,1513239720.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:00.894Z,1513239720.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:01.223Z,1513239721.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:01.267Z,1513239721.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:01.626Z,1513239721.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:01.641Z,1513239721.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:02.022Z,1513239722.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:02.039Z,1513239722.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:02.409Z,1513239722.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:02.424Z,1513239722.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:02.808Z,1513239722.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:02.847Z,1513239722.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:03.209Z,1513239723.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:03.223Z,1513239723.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:03.608Z,1513239723.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:03.655Z,1513239723.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:04.008Z,1513239724.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:04.025Z,1513239724.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:04.424Z,1513239724.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:04.494Z,1513239724.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:04.821Z,1513239724.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:04.835Z,1513239724.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:05.222Z,1513239725.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:05.237Z,1513239725.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:05.611Z,1513239725.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:05.626Z,1513239725.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:06.010Z,1513239726.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:06.025Z,1513239726.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:06.408Z,1513239726.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:06.423Z,1513239726.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:06.827Z,1513239726.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:06.865Z,1513239726.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:07.221Z,1513239727.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:07.236Z,1513239727.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:07.621Z,1513239727.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:07.635Z,1513239727.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:08.013Z,1513239728.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:08.027Z,1513239728.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:08.411Z,1513239728.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:08.431Z,1513239728.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:08.819Z,1513239728.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:08.862Z,1513239728.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:09.205Z,1513239729.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:09.220Z,1513239729.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:09.610Z,1513239729.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:09.624Z,1513239729.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:10.024Z,1513239730.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:10.052Z,1513239730.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:10.418Z,1513239730.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:10.444Z,1513239730.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:10.822Z,1513239730.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:10.888Z,1513239730.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:11.231Z,1513239731.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:11.262Z,1513239731.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:11.619Z,1513239731.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:11.647Z,1513239731.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:12.007Z,1513239732.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:12.070Z,1513239732.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:12.408Z,1513239732.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:12.451Z,1513239732.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:12.807Z,1513239732.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:12.843Z,1513239732.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:13.218Z,1513239733.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:13.243Z,1513239733.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:13.633Z,1513239733.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:13.652Z,1513239733.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:14.023Z,1513239734.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:14.069Z,1513239734.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:14.411Z,1513239734.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:14.446Z,1513239734.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:14.812Z,1513239734.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:14.826Z,1513239734.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:15.215Z,1513239735.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:15.229Z,1513239735.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:15.618Z,1513239735.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:15.633Z,1513239735.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:16.012Z,1513239736.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:16.038Z,1513239736.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:16.426Z,1513239736.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:16.485Z,1513239736.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:16.829Z,1513239736.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:16.851Z,1513239736.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:17.229Z,1513239737.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:17.244Z,1513239737.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:17.628Z,1513239737.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:17.651Z,1513239737.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:18.011Z,1513239738.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:18.038Z,1513239738.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:18.425Z,1513239738.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:18.440Z,1513239738.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:18.808Z,1513239738.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:18.839Z,1513239738.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:19.231Z,1513239739.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:19.246Z,1513239739.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:19.633Z,1513239739.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:19.649Z,1513239739.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:20.034Z,1513239740.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:20.056Z,1513239740.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:20.409Z,1513239740.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:20.435Z,1513239740.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:20.880Z,1513239740.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:20.932Z,1513239740.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:21.207Z,1513239741.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:21.247Z,1513239741.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:21.612Z,1513239741.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:21.651Z,1513239741.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:22.007Z,1513239742.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:22.043Z,1513239742.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:22.425Z,1513239742.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:22.452Z,1513239742.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:22.886Z,1513239742.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:22.994Z,1513239742.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:23.222Z,1513239743.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:23.236Z,1513239743.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:23.609Z,1513239743.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:23.664Z,1513239743.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:24.008Z,1513239744.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:24.028Z,1513239744.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:24.407Z,1513239744.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:24.444Z,1513239744.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:24.819Z,1513239744.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:24.863Z,1513239744.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:25.225Z,1513239745.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:25.247Z,1513239745.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:25.629Z,1513239745.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:25.701Z,1513239745.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:26.025Z,1513239746.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:26.055Z,1513239746.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:26.415Z,1513239746.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:26.451Z,1513239746.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:26.814Z,1513239746.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:26.829Z,1513239746.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:27.217Z,1513239747.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:27.231Z,1513239747.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:27.613Z,1513239747.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:27.637Z,1513239747.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:28.024Z,1513239748.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:28.043Z,1513239748.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:28.430Z,1513239748.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:28.451Z,1513239748.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:28.827Z,1513239748.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:28.849Z,1513239748.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:29.226Z,1513239749.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:29.241Z,1513239749.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:29.607Z,1513239749.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:29.638Z,1513239749.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:30.008Z,1513239750.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:30.035Z,1513239750.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:30.445Z,1513239750.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:30.536Z,1513239750.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:30.807Z,1513239750.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:30.842Z,1513239750.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:31.194Z,1513239751.194 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:22:31.194Z,1513239751.194 [NAL9602] Data Fault, FailCount= 3
2017-12-14T08:22:31.195Z,1513239751.195 [NAL9602](ERROR): Data Fault
2017-12-14T08:22:31.226Z,1513239751.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:31.249Z,1513239751.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:31.267Z,1513239751.267 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:22:31.590Z,1513239751.590 [NAL9602](INFO): Powering down
2017-12-14T08:22:31.607Z,1513239751.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:31.652Z,1513239751.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:32.010Z,1513239752.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:32.044Z,1513239752.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:32.412Z,1513239752.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:32.443Z,1513239752.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:32.457Z,1513239752.457 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:22:32.457Z,1513239752.457 [NAL9602] No Fault, FailCount= 3
2017-12-14T08:22:32.817Z,1513239752.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:32.831Z,1513239752.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:33.211Z,1513239753.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:33.227Z,1513239753.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:33.614Z,1513239753.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:33.629Z,1513239753.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:34.006Z,1513239754.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:34.068Z,1513239754.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:34.411Z,1513239754.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:34.443Z,1513239754.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:34.850Z,1513239754.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:34.898Z,1513239754.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:35.215Z,1513239755.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:35.235Z,1513239755.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:35.616Z,1513239755.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:35.632Z,1513239755.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:36.015Z,1513239756.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:36.030Z,1513239756.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:36.415Z,1513239756.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:36.431Z,1513239756.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:36.841Z,1513239756.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:36.884Z,1513239756.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:37.206Z,1513239757.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:37.238Z,1513239757.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:37.611Z,1513239757.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:37.643Z,1513239757.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:38.006Z,1513239758.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:38.022Z,1513239758.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:38.406Z,1513239758.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:38.421Z,1513239758.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:38.819Z,1513239758.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:38.834Z,1513239758.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:39.215Z,1513239759.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:39.229Z,1513239759.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:39.614Z,1513239759.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:39.629Z,1513239759.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:40.016Z,1513239760.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:40.031Z,1513239760.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:40.414Z,1513239760.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:40.430Z,1513239760.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:40.806Z,1513239760.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:40.840Z,1513239760.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:41.219Z,1513239761.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:41.239Z,1513239761.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:41.607Z,1513239761.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:41.643Z,1513239761.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:42.011Z,1513239762.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:42.038Z,1513239762.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:42.408Z,1513239762.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:42.446Z,1513239762.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:42.812Z,1513239762.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:42.828Z,1513239762.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:43.215Z,1513239763.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:43.230Z,1513239763.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:43.231Z,1513239763.231 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:43.231Z,1513239763.231 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 157
2017-12-14T08:22:43.231Z,1513239763.231 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:22:43.234Z,1513239763.234 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:43.234Z,1513239763.234 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2017-12-14T08:22:43.234Z,1513239763.234 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:22:43.311Z,1513239763.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:22:43.311Z,1513239763.311 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:22:43.606Z,1513239763.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:43.647Z,1513239763.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:43.647Z,1513239763.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157
2017-12-14T08:22:43.647Z,1513239763.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:22:43.671Z,1513239763.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:22:43.671Z,1513239763.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:22:43.671Z,1513239763.671 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 157
2017-12-14T08:22:43.672Z,1513239763.672 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:22:43.672Z,1513239763.672 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2017-12-14T08:22:44.014Z,1513239764.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:44.045Z,1513239764.045 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:22:44.046Z,1513239764.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:22:44.046Z,1513239764.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:22:44.047Z,1513239764.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:22:44.047Z,1513239764.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:22:44.047Z,1513239764.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:22:44.058Z,1513239764.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:22:44.059Z,1513239764.059 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157
2017-12-14T08:22:44.410Z,1513239764.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:44.424Z,1513239764.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:22:44.425Z,1513239764.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:22:44.425Z,1513239764.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:22:44.822Z,1513239764.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:44.854Z,1513239764.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:45.206Z,1513239765.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:45.248Z,1513239765.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:45.611Z,1513239765.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:45.627Z,1513239765.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:49.127Z,1513239769.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:49.212Z,1513239769.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:49.313Z,1513239769.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:49.362Z,1513239769.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:49.695Z,1513239769.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:49.725Z,1513239769.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:50.082Z,1513239770.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:50.135Z,1513239770.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:50.472Z,1513239770.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:50.487Z,1513239770.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:50.907Z,1513239770.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:50.976Z,1513239770.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:51.281Z,1513239771.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:51.296Z,1513239771.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:51.676Z,1513239771.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:51.692Z,1513239771.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:52.081Z,1513239772.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:52.097Z,1513239772.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:52.533Z,1513239772.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:52.563Z,1513239772.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:52.890Z,1513239772.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:52.934Z,1513239772.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:53.281Z,1513239773.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:53.317Z,1513239773.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:53.678Z,1513239773.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:53.692Z,1513239773.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:54.073Z,1513239774.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:54.088Z,1513239774.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:54.544Z,1513239774.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:54.579Z,1513239774.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:54.869Z,1513239774.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:54.915Z,1513239774.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:55.275Z,1513239775.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:55.301Z,1513239775.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:55.691Z,1513239775.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:55.706Z,1513239775.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:56.110Z,1513239776.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:56.155Z,1513239776.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:56.526Z,1513239776.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:56.563Z,1513239776.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:56.886Z,1513239776.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:56.910Z,1513239776.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:57.277Z,1513239777.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:57.299Z,1513239777.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:57.672Z,1513239777.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:57.687Z,1513239777.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:58.081Z,1513239778.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:58.096Z,1513239778.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:58.549Z,1513239778.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:58.563Z,1513239778.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:58.868Z,1513239778.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:58.900Z,1513239778.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:59.333Z,1513239779.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:59.392Z,1513239779.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:22:59.670Z,1513239779.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:22:59.701Z,1513239779.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:00.066Z,1513239780.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:00.089Z,1513239780.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:00.475Z,1513239780.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:00.565Z,1513239780.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:00.878Z,1513239780.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:00.918Z,1513239780.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:01.275Z,1513239781.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:01.291Z,1513239781.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:01.659Z,1513239781.659 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:23:01.677Z,1513239781.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:01.691Z,1513239781.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:02.073Z,1513239782.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:02.087Z,1513239782.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:02.533Z,1513239782.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:02.622Z,1513239782.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:02.889Z,1513239782.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:02.932Z,1513239782.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:03.280Z,1513239783.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:03.294Z,1513239783.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:03.676Z,1513239783.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:03.692Z,1513239783.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:04.073Z,1513239784.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:04.088Z,1513239784.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:04.474Z,1513239784.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:04.558Z,1513239784.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:04.887Z,1513239784.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:04.943Z,1513239784.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:05.282Z,1513239785.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:05.296Z,1513239785.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:05.680Z,1513239785.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:05.695Z,1513239785.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:06.080Z,1513239786.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:06.096Z,1513239786.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:06.522Z,1513239786.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:06.548Z,1513239786.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:06.884Z,1513239786.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:06.911Z,1513239786.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:07.282Z,1513239787.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:07.297Z,1513239787.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:07.687Z,1513239787.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:07.707Z,1513239787.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:08.082Z,1513239788.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:08.096Z,1513239788.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:08.520Z,1513239788.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:08.571Z,1513239788.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:08.903Z,1513239788.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:08.932Z,1513239788.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:09.297Z,1513239789.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:09.312Z,1513239789.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:09.679Z,1513239789.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:09.710Z,1513239789.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:10.076Z,1513239790.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:10.091Z,1513239790.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:10.527Z,1513239790.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:10.579Z,1513239790.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:10.887Z,1513239790.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:10.910Z,1513239790.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:11.281Z,1513239791.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:11.346Z,1513239791.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:11.682Z,1513239791.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:11.716Z,1513239791.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:12.102Z,1513239792.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:12.143Z,1513239792.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:12.552Z,1513239792.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:12.616Z,1513239792.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:12.858Z,1513239792.858 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:23:12.877Z,1513239792.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:12.913Z,1513239792.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:13.279Z,1513239793.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:13.331Z,1513239793.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:13.699Z,1513239793.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:13.714Z,1513239793.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:14.085Z,1513239794.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:14.115Z,1513239794.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:14.482Z,1513239794.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:14.562Z,1513239794.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:14.879Z,1513239794.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:14.895Z,1513239794.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:15.330Z,1513239795.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:15.377Z,1513239795.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:15.683Z,1513239795.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:15.697Z,1513239795.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:16.093Z,1513239796.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:16.124Z,1513239796.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:16.486Z,1513239796.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:16.500Z,1513239796.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:16.914Z,1513239796.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:16.938Z,1513239796.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:17.280Z,1513239797.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:17.296Z,1513239797.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:17.680Z,1513239797.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:17.704Z,1513239797.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:18.079Z,1513239798.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:18.106Z,1513239798.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:18.499Z,1513239798.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:18.541Z,1513239798.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:18.890Z,1513239798.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:18.911Z,1513239798.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:19.294Z,1513239799.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:19.309Z,1513239799.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:19.696Z,1513239799.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:19.750Z,1513239799.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:20.090Z,1513239800.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:20.107Z,1513239800.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:20.532Z,1513239800.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:20.571Z,1513239800.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:20.872Z,1513239800.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:20.888Z,1513239800.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:21.276Z,1513239801.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:21.292Z,1513239801.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:21.721Z,1513239801.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:21.771Z,1513239801.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:22.099Z,1513239802.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:22.127Z,1513239802.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:22.559Z,1513239802.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:22.590Z,1513239802.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:22.891Z,1513239802.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:22.907Z,1513239802.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:23.272Z,1513239803.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:23.308Z,1513239803.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:23.676Z,1513239803.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:23.710Z,1513239803.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:24.071Z,1513239804.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:24.094Z,1513239804.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:24.532Z,1513239804.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:24.571Z,1513239804.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:24.934Z,1513239804.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:24.981Z,1513239804.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:25.293Z,1513239805.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:25.328Z,1513239805.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:25.693Z,1513239805.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:25.707Z,1513239805.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:26.087Z,1513239806.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:26.102Z,1513239806.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:26.524Z,1513239806.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:26.548Z,1513239806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:26.871Z,1513239806.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:26.885Z,1513239806.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:27.280Z,1513239807.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:27.316Z,1513239807.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:27.674Z,1513239807.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:27.688Z,1513239807.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:28.123Z,1513239808.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:28.144Z,1513239808.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:28.493Z,1513239808.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:28.589Z,1513239808.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:28.893Z,1513239808.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:28.933Z,1513239808.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:29.277Z,1513239809.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:29.299Z,1513239809.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:29.678Z,1513239809.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:29.693Z,1513239809.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:30.077Z,1513239810.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:30.093Z,1513239810.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:30.477Z,1513239810.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:30.492Z,1513239810.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:30.908Z,1513239810.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:30.935Z,1513239810.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:31.305Z,1513239811.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:31.328Z,1513239811.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:31.701Z,1513239811.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:31.731Z,1513239811.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:32.094Z,1513239812.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:32.126Z,1513239812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:32.478Z,1513239812.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:32.492Z,1513239812.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:32.893Z,1513239812.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:32.932Z,1513239812.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:33.278Z,1513239813.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:33.305Z,1513239813.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:33.683Z,1513239813.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:33.766Z,1513239813.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:34.095Z,1513239814.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:34.110Z,1513239814.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:34.552Z,1513239814.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:34.628Z,1513239814.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:34.881Z,1513239814.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:34.919Z,1513239814.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:35.277Z,1513239815.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:35.332Z,1513239815.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:35.677Z,1513239815.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:35.692Z,1513239815.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:36.079Z,1513239816.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:36.094Z,1513239816.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:36.538Z,1513239816.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:36.583Z,1513239816.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:36.878Z,1513239816.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:36.893Z,1513239816.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:37.285Z,1513239817.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:37.300Z,1513239817.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:37.693Z,1513239817.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:37.726Z,1513239817.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:38.082Z,1513239818.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:38.096Z,1513239818.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:38.533Z,1513239818.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:38.573Z,1513239818.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:38.880Z,1513239818.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:38.914Z,1513239818.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:39.276Z,1513239819.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:39.292Z,1513239819.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:39.679Z,1513239819.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:39.693Z,1513239819.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:40.093Z,1513239820.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:40.121Z,1513239820.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:40.532Z,1513239820.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:40.560Z,1513239820.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:40.899Z,1513239820.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:40.935Z,1513239820.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:41.281Z,1513239821.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:41.303Z,1513239821.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:41.683Z,1513239821.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:41.700Z,1513239821.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:42.079Z,1513239822.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:42.093Z,1513239822.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:42.480Z,1513239822.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:42.494Z,1513239822.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:42.871Z,1513239822.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:42.909Z,1513239822.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:43.297Z,1513239823.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:43.313Z,1513239823.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:43.698Z,1513239823.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:43.742Z,1513239823.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:44.122Z,1513239824.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:44.156Z,1513239824.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:44.471Z,1513239824.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:44.496Z,1513239824.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:44.907Z,1513239824.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:44.923Z,1513239824.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:44.946Z,1513239824.946 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:23:44.946Z,1513239824.946 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:23:44.946Z,1513239824.946 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:23:44.946Z,1513239824.946 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:23:45.289Z,1513239825.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:45.304Z,1513239825.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:45.308Z,1513239825.308 [Default:CheckIn:D] Stopped
2017-12-14T08:23:45.308Z,1513239825.308 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:23:45.673Z,1513239825.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:45.700Z,1513239825.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 470.498633 min 
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn:E] Stopped
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn] Stopped
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn](INFO): Running loop #46
2017-12-14T08:23:45.708Z,1513239825.708 [Default:CheckIn] Running Loop=46
2017-12-14T08:23:45.713Z,1513239825.713 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:23:45.713Z,1513239825.713 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:23:49.222Z,1513239829.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:49.253Z,1513239829.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:49.354Z,1513239829.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:49.392Z,1513239829.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:49.717Z,1513239829.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:49.752Z,1513239829.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:50.108Z,1513239830.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:50.123Z,1513239830.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:50.569Z,1513239830.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:50.606Z,1513239830.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:50.934Z,1513239830.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:50.957Z,1513239830.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:51.314Z,1513239831.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:51.330Z,1513239831.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:51.714Z,1513239831.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:51.728Z,1513239831.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:52.107Z,1513239832.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:52.126Z,1513239832.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:52.551Z,1513239832.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:52.599Z,1513239832.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:52.930Z,1513239832.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:52.955Z,1513239832.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:53.315Z,1513239833.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:53.335Z,1513239833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:53.714Z,1513239833.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:53.776Z,1513239833.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:54.111Z,1513239834.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:54.131Z,1513239834.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:54.543Z,1513239834.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:54.587Z,1513239834.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:54.944Z,1513239834.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:54.959Z,1513239834.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:55.323Z,1513239835.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:55.338Z,1513239835.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:55.728Z,1513239835.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:55.759Z,1513239835.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:56.114Z,1513239836.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:56.171Z,1513239836.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:56.506Z,1513239836.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:56.610Z,1513239836.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:56.946Z,1513239836.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:57.005Z,1513239837.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:57.325Z,1513239837.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:57.352Z,1513239837.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:57.715Z,1513239837.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:57.767Z,1513239837.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:58.104Z,1513239838.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:58.142Z,1513239838.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:58.504Z,1513239838.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:58.527Z,1513239838.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:58.918Z,1513239838.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:58.955Z,1513239838.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:59.325Z,1513239839.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:59.356Z,1513239839.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:23:59.719Z,1513239839.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:23:59.739Z,1513239839.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:00.150Z,1513239840.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:00.182Z,1513239840.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:00.503Z,1513239840.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:00.535Z,1513239840.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:00.930Z,1513239840.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:00.948Z,1513239840.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:01.333Z,1513239841.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:01.355Z,1513239841.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:01.723Z,1513239841.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:01.739Z,1513239841.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:02.106Z,1513239842.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:02.136Z,1513239842.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:02.543Z,1513239842.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:02.583Z,1513239842.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:02.930Z,1513239842.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:02.949Z,1513239842.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:03.352Z,1513239843.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:03.372Z,1513239843.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:03.710Z,1513239843.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:03.726Z,1513239843.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:04.111Z,1513239844.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:04.126Z,1513239844.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:04.555Z,1513239844.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:04.579Z,1513239844.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:04.919Z,1513239844.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:04.947Z,1513239844.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:05.317Z,1513239845.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:05.379Z,1513239845.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:05.714Z,1513239845.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:05.729Z,1513239845.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:06.111Z,1513239846.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:06.163Z,1513239846.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:06.606Z,1513239846.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:06.636Z,1513239846.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:06.920Z,1513239846.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:06.961Z,1513239846.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:07.314Z,1513239847.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:07.329Z,1513239847.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:07.714Z,1513239847.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:07.728Z,1513239847.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:08.112Z,1513239848.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:08.127Z,1513239848.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:08.551Z,1513239848.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:08.571Z,1513239848.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:08.929Z,1513239848.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:08.959Z,1513239848.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:09.313Z,1513239849.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:09.336Z,1513239849.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:09.714Z,1513239849.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:09.729Z,1513239849.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:10.121Z,1513239850.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:10.136Z,1513239850.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:10.540Z,1513239850.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:10.606Z,1513239850.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:10.925Z,1513239850.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:10.952Z,1513239850.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:11.325Z,1513239851.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:11.347Z,1513239851.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:11.723Z,1513239851.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:11.739Z,1513239851.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:12.108Z,1513239852.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:12.137Z,1513239852.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:12.504Z,1513239852.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:12.535Z,1513239852.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:12.935Z,1513239852.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:12.958Z,1513239852.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:13.334Z,1513239853.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:13.348Z,1513239853.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:13.719Z,1513239853.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:13.742Z,1513239853.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:14.107Z,1513239854.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:14.144Z,1513239854.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:14.504Z,1513239854.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:14.520Z,1513239854.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:14.943Z,1513239854.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:14.959Z,1513239854.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:15.321Z,1513239855.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:15.355Z,1513239855.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:15.714Z,1513239855.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:15.747Z,1513239855.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:16.119Z,1513239856.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:16.188Z,1513239856.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:16.543Z,1513239856.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:16.590Z,1513239856.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:16.918Z,1513239856.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:16.938Z,1513239856.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:17.321Z,1513239857.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:17.347Z,1513239857.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:17.717Z,1513239857.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:17.751Z,1513239857.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:18.103Z,1513239858.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:18.175Z,1513239858.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:18.549Z,1513239858.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:18.568Z,1513239858.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:18.922Z,1513239858.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:18.992Z,1513239858.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:19.339Z,1513239859.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:19.367Z,1513239859.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:19.721Z,1513239859.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:19.763Z,1513239859.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:20.111Z,1513239860.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:20.125Z,1513239860.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:20.538Z,1513239860.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:20.565Z,1513239860.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:20.934Z,1513239860.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:20.948Z,1513239860.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:21.327Z,1513239861.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:21.342Z,1513239861.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:21.723Z,1513239861.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:21.739Z,1513239861.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:22.100Z,1513239862.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:22.126Z,1513239862.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:22.633Z,1513239862.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:22.686Z,1513239862.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:22.936Z,1513239862.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:22.951Z,1513239862.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:23.323Z,1513239863.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:23.338Z,1513239863.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:23.742Z,1513239863.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:23.780Z,1513239863.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:24.117Z,1513239864.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:24.132Z,1513239864.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:24.544Z,1513239864.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:24.602Z,1513239864.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:24.914Z,1513239864.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:24.937Z,1513239864.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:25.322Z,1513239865.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:25.349Z,1513239865.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:25.722Z,1513239865.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:25.751Z,1513239865.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:26.115Z,1513239866.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:26.154Z,1513239866.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:26.505Z,1513239866.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:26.520Z,1513239866.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:26.926Z,1513239866.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:26.956Z,1513239866.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:27.325Z,1513239867.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:27.350Z,1513239867.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:27.719Z,1513239867.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:27.753Z,1513239867.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:28.127Z,1513239868.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:28.195Z,1513239868.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:28.505Z,1513239868.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:28.519Z,1513239868.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:28.926Z,1513239868.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:28.956Z,1513239868.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:29.325Z,1513239869.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:29.350Z,1513239869.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:29.718Z,1513239869.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:29.753Z,1513239869.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:30.111Z,1513239870.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:30.128Z,1513239870.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:30.534Z,1513239870.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:30.560Z,1513239870.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:30.922Z,1513239870.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:30.949Z,1513239870.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:31.318Z,1513239871.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:31.333Z,1513239871.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:31.718Z,1513239871.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:31.732Z,1513239871.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:32.111Z,1513239872.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:32.152Z,1513239872.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:32.541Z,1513239872.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:32.585Z,1513239872.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:32.928Z,1513239872.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:32.944Z,1513239872.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:33.333Z,1513239873.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:33.444Z,1513239873.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:33.723Z,1513239873.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:33.743Z,1513239873.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:34.104Z,1513239874.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:34.139Z,1513239874.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:34.539Z,1513239874.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:34.582Z,1513239874.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:34.927Z,1513239874.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:34.943Z,1513239874.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:35.335Z,1513239875.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:35.355Z,1513239875.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:35.723Z,1513239875.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:35.743Z,1513239875.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:36.104Z,1513239876.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:36.132Z,1513239876.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:36.541Z,1513239876.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:36.581Z,1513239876.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:36.926Z,1513239876.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:36.955Z,1513239876.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:37.321Z,1513239877.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:37.348Z,1513239877.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:37.714Z,1513239877.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:37.728Z,1513239877.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:38.111Z,1513239878.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:38.126Z,1513239878.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:38.551Z,1513239878.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:38.613Z,1513239878.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:38.943Z,1513239878.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:38.961Z,1513239878.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:39.326Z,1513239879.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:39.357Z,1513239879.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:39.722Z,1513239879.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:39.756Z,1513239879.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:40.106Z,1513239880.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:40.152Z,1513239880.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:40.510Z,1513239880.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:40.525Z,1513239880.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:40.916Z,1513239880.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:40.936Z,1513239880.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:41.323Z,1513239881.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:41.373Z,1513239881.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:41.724Z,1513239881.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:41.739Z,1513239881.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:42.100Z,1513239882.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:42.161Z,1513239882.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:42.513Z,1513239882.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:42.528Z,1513239882.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:42.929Z,1513239882.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:42.945Z,1513239882.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:43.326Z,1513239883.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:43.348Z,1513239883.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:43.727Z,1513239883.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:43.741Z,1513239883.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:44.100Z,1513239884.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:44.129Z,1513239884.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:44.536Z,1513239884.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:44.580Z,1513239884.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:44.955Z,1513239884.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:44.979Z,1513239884.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:45.337Z,1513239885.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:45.356Z,1513239885.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:45.717Z,1513239885.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:45.744Z,1513239885.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:49.203Z,1513239889.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:49.218Z,1513239889.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:49.318Z,1513239889.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:49.353Z,1513239889.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:49.718Z,1513239889.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:49.750Z,1513239889.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:50.125Z,1513239890.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:50.180Z,1513239890.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:50.563Z,1513239890.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:50.611Z,1513239890.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:50.908Z,1513239890.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:50.935Z,1513239890.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:51.319Z,1513239891.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:51.365Z,1513239891.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:51.706Z,1513239891.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:51.722Z,1513239891.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:52.110Z,1513239892.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:52.125Z,1513239892.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:52.571Z,1513239892.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:52.619Z,1513239892.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:52.910Z,1513239892.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:52.934Z,1513239892.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:53.318Z,1513239893.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:53.333Z,1513239893.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:53.710Z,1513239893.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:53.724Z,1513239893.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:54.113Z,1513239894.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:54.129Z,1513239894.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:54.529Z,1513239894.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:54.574Z,1513239894.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:54.918Z,1513239894.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:54.940Z,1513239894.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:55.317Z,1513239895.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:55.348Z,1513239895.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:55.718Z,1513239895.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:55.748Z,1513239895.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:56.109Z,1513239896.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:56.123Z,1513239896.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:56.504Z,1513239896.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:56.524Z,1513239896.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:56.918Z,1513239896.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:56.957Z,1513239896.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:57.321Z,1513239897.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:57.355Z,1513239897.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:57.755Z,1513239897.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:57.806Z,1513239897.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:58.112Z,1513239898.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:58.127Z,1513239898.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:58.549Z,1513239898.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:58.573Z,1513239898.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:58.922Z,1513239898.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:58.950Z,1513239898.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:59.318Z,1513239899.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:59.332Z,1513239899.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:24:59.713Z,1513239899.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:24:59.728Z,1513239899.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:00.112Z,1513239900.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:00.131Z,1513239900.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:00.534Z,1513239900.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:00.599Z,1513239900.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:00.951Z,1513239900.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:00.980Z,1513239900.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:01.325Z,1513239901.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:01.364Z,1513239901.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:01.720Z,1513239901.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:01.735Z,1513239901.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:02.111Z,1513239902.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:02.126Z,1513239902.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:02.541Z,1513239902.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:02.623Z,1513239902.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:02.932Z,1513239902.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:02.947Z,1513239902.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:03.323Z,1513239903.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:03.372Z,1513239903.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:03.721Z,1513239903.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:03.737Z,1513239903.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:04.117Z,1513239904.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:04.215Z,1513239904.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:04.533Z,1513239904.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:04.578Z,1513239904.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:04.915Z,1513239904.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:04.946Z,1513239904.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:05.327Z,1513239905.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:05.347Z,1513239905.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:05.724Z,1513239905.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:05.738Z,1513239905.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:06.100Z,1513239906.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:06.138Z,1513239906.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:06.524Z,1513239906.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:06.584Z,1513239906.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:06.918Z,1513239906.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:06.971Z,1513239906.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:07.338Z,1513239907.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:07.371Z,1513239907.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:07.722Z,1513239907.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:07.752Z,1513239907.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:08.110Z,1513239908.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:08.126Z,1513239908.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:08.507Z,1513239908.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:08.527Z,1513239908.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:08.926Z,1513239908.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:08.952Z,1513239908.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:09.317Z,1513239909.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:09.331Z,1513239909.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:09.714Z,1513239909.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:09.728Z,1513239909.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:10.111Z,1513239910.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:10.126Z,1513239910.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:10.508Z,1513239910.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:10.523Z,1513239910.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:10.919Z,1513239910.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:10.935Z,1513239910.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:11.317Z,1513239911.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:11.332Z,1513239911.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:11.714Z,1513239911.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:11.728Z,1513239911.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:12.115Z,1513239912.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:12.135Z,1513239912.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:12.540Z,1513239912.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:12.595Z,1513239912.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:12.932Z,1513239912.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:12.947Z,1513239912.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:13.324Z,1513239913.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:13.340Z,1513239913.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:13.721Z,1513239913.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:13.736Z,1513239913.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:14.099Z,1513239914.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:14.179Z,1513239914.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:14.548Z,1513239914.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:14.588Z,1513239914.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:14.928Z,1513239914.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:14.943Z,1513239914.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:15.329Z,1513239915.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:15.351Z,1513239915.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:15.709Z,1513239915.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:15.744Z,1513239915.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:16.108Z,1513239916.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:16.140Z,1513239916.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:16.557Z,1513239916.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:16.572Z,1513239916.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:16.906Z,1513239916.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:16.921Z,1513239916.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:17.357Z,1513239917.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:17.403Z,1513239917.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:17.722Z,1513239917.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:17.755Z,1513239917.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:18.109Z,1513239918.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:18.141Z,1513239918.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:18.538Z,1513239918.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:18.565Z,1513239918.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:18.915Z,1513239918.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:18.951Z,1513239918.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:19.330Z,1513239919.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:19.355Z,1513239919.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:19.715Z,1513239919.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:19.751Z,1513239919.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:20.110Z,1513239920.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:20.126Z,1513239920.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:20.588Z,1513239920.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:20.643Z,1513239920.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:20.926Z,1513239920.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:20.951Z,1513239920.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:21.313Z,1513239921.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:21.328Z,1513239921.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:21.711Z,1513239921.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:21.726Z,1513239921.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:22.109Z,1513239922.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:22.124Z,1513239922.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:22.506Z,1513239922.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:22.535Z,1513239922.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:22.918Z,1513239922.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:22.933Z,1513239922.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:23.322Z,1513239923.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:23.382Z,1513239923.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:23.717Z,1513239923.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:23.743Z,1513239923.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:24.104Z,1513239924.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:24.140Z,1513239924.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:24.502Z,1513239924.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:24.540Z,1513239924.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:24.936Z,1513239924.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:24.951Z,1513239924.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:25.327Z,1513239925.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:25.342Z,1513239925.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:25.710Z,1513239925.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:25.743Z,1513239925.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:26.103Z,1513239926.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:26.142Z,1513239926.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:26.544Z,1513239926.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:26.588Z,1513239926.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:26.971Z,1513239926.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:27.007Z,1513239927.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:27.318Z,1513239927.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:27.339Z,1513239927.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:27.712Z,1513239927.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:27.725Z,1513239927.725 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:25:27.725Z,1513239927.725 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:25:27.725Z,1513239927.725 [BPC1](ERROR): Communications Fault
2017-12-14T08:25:27.742Z,1513239927.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:27.763Z,1513239927.763 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:25:28.114Z,1513239928.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:28.129Z,1513239928.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:28.556Z,1513239928.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:28.579Z,1513239928.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:28.922Z,1513239928.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:28.943Z,1513239928.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:28.981Z,1513239928.981 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:25:28.981Z,1513239928.981 [BPC1] No Fault, FailCount= 1
2017-12-14T08:25:29.324Z,1513239929.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:29.411Z,1513239929.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:29.749Z,1513239929.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:29.774Z,1513239929.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:30.123Z,1513239930.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:30.146Z,1513239930.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:30.553Z,1513239930.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:30.580Z,1513239930.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:30.929Z,1513239930.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:30.944Z,1513239930.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:31.326Z,1513239931.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:31.341Z,1513239931.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:31.720Z,1513239931.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:31.734Z,1513239931.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:32.103Z,1513239932.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:32.135Z,1513239932.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:32.541Z,1513239932.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:32.580Z,1513239932.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:32.914Z,1513239932.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:32.951Z,1513239932.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:33.370Z,1513239933.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:33.429Z,1513239933.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:33.718Z,1513239933.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:33.732Z,1513239933.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:34.099Z,1513239934.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:34.130Z,1513239934.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:34.536Z,1513239934.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:34.608Z,1513239934.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:34.914Z,1513239934.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:34.941Z,1513239934.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:35.331Z,1513239935.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:35.346Z,1513239935.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:35.713Z,1513239935.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:35.743Z,1513239935.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:36.104Z,1513239936.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:36.118Z,1513239936.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:36.558Z,1513239936.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:36.603Z,1513239936.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:36.918Z,1513239936.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:36.947Z,1513239936.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:37.321Z,1513239937.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:37.351Z,1513239937.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:37.717Z,1513239937.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:37.784Z,1513239937.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:38.102Z,1513239938.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:38.118Z,1513239938.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:38.505Z,1513239938.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:38.520Z,1513239938.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:38.922Z,1513239938.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:38.952Z,1513239938.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:39.317Z,1513239939.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:39.344Z,1513239939.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:39.756Z,1513239939.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:39.799Z,1513239939.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:40.113Z,1513239940.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:40.147Z,1513239940.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:40.549Z,1513239940.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:40.575Z,1513239940.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:40.932Z,1513239940.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:40.952Z,1513239940.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:41.321Z,1513239941.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:41.347Z,1513239941.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:41.717Z,1513239941.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:41.746Z,1513239941.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:42.109Z,1513239942.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:42.124Z,1513239942.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:42.549Z,1513239942.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:42.574Z,1513239942.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:42.954Z,1513239942.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:42.993Z,1513239942.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:43.321Z,1513239943.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:43.345Z,1513239943.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:43.713Z,1513239943.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:43.744Z,1513239943.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:44.106Z,1513239944.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:44.121Z,1513239944.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:44.123Z,1513239944.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:44.123Z,1513239944.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 158
2017-12-14T08:25:44.123Z,1513239944.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:25:44.125Z,1513239944.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:44.125Z,1513239944.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2017-12-14T08:25:44.125Z,1513239944.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:25:44.169Z,1513239944.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:25:44.170Z,1513239944.170 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:25:44.550Z,1513239944.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:44.576Z,1513239944.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:44.576Z,1513239944.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158
2017-12-14T08:25:44.576Z,1513239944.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:25:44.618Z,1513239944.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:25:44.618Z,1513239944.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:25:44.618Z,1513239944.618 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 158
2017-12-14T08:25:44.619Z,1513239944.619 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:25:44.619Z,1513239944.619 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2017-12-14T08:25:44.922Z,1513239944.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:44.984Z,1513239944.984 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:25:44.984Z,1513239944.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:25:44.984Z,1513239944.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:25:45.001Z,1513239945.001 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:25:45.002Z,1513239945.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:25:45.002Z,1513239945.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:25:45.062Z,1513239945.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:25:45.062Z,1513239945.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158
2017-12-14T08:25:45.330Z,1513239945.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:45.363Z,1513239945.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:25:45.364Z,1513239945.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:25:45.364Z,1513239945.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:25:45.717Z,1513239945.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:45.732Z,1513239945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:46.126Z,1513239946.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:46.151Z,1513239946.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:49.578Z,1513239949.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:49.667Z,1513239949.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:49.786Z,1513239949.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:49.824Z,1513239949.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:50.136Z,1513239950.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:50.152Z,1513239950.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:50.537Z,1513239950.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:50.552Z,1513239950.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:50.932Z,1513239950.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:50.986Z,1513239950.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:51.330Z,1513239951.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:51.344Z,1513239951.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:51.728Z,1513239951.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:51.775Z,1513239951.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:52.139Z,1513239952.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:52.154Z,1513239952.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:52.538Z,1513239952.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:52.579Z,1513239952.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:52.943Z,1513239952.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:52.964Z,1513239952.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:53.328Z,1513239953.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:53.343Z,1513239953.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:53.716Z,1513239953.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:53.747Z,1513239953.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:54.120Z,1513239954.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:54.146Z,1513239954.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:54.540Z,1513239954.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:54.579Z,1513239954.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:54.950Z,1513239954.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:54.965Z,1513239954.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:55.349Z,1513239955.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:55.364Z,1513239955.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:55.740Z,1513239955.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:55.768Z,1513239955.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:56.132Z,1513239956.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:56.166Z,1513239956.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:56.559Z,1513239956.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:56.577Z,1513239956.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:56.953Z,1513239956.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:56.967Z,1513239956.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:57.334Z,1513239957.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:57.363Z,1513239957.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:57.735Z,1513239957.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:57.757Z,1513239957.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:58.128Z,1513239958.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:58.170Z,1513239958.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:58.556Z,1513239958.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:58.580Z,1513239958.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:58.935Z,1513239958.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:58.959Z,1513239958.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:59.329Z,1513239959.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:59.348Z,1513239959.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:25:59.729Z,1513239959.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:25:59.744Z,1513239959.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:00.130Z,1513239960.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:00.169Z,1513239960.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:00.548Z,1513239960.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:00.585Z,1513239960.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:00.931Z,1513239960.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:00.956Z,1513239960.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:01.338Z,1513239961.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:01.354Z,1513239961.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:01.738Z,1513239961.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:01.752Z,1513239961.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:02.158Z,1513239962.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:02.195Z,1513239962.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:02.580Z,1513239962.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:02.631Z,1513239962.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:02.943Z,1513239962.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:02.965Z,1513239962.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:03.333Z,1513239963.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:03.360Z,1513239963.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:03.733Z,1513239963.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:03.747Z,1513239963.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:04.123Z,1513239964.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:04.150Z,1513239964.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:04.530Z,1513239964.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:04.544Z,1513239964.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:04.935Z,1513239964.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:04.950Z,1513239964.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:05.338Z,1513239965.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:05.375Z,1513239965.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:05.734Z,1513239965.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:05.756Z,1513239965.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:06.129Z,1513239966.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:06.144Z,1513239966.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:06.515Z,1513239966.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:06.549Z,1513239966.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:06.935Z,1513239966.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:06.950Z,1513239966.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:07.343Z,1513239967.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:07.358Z,1513239967.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:07.738Z,1513239967.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:07.754Z,1513239967.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:08.127Z,1513239968.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:08.142Z,1513239968.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:08.586Z,1513239968.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:08.637Z,1513239968.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:08.939Z,1513239968.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:08.959Z,1513239968.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:09.341Z,1513239969.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:09.356Z,1513239969.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:09.738Z,1513239969.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:09.757Z,1513239969.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:10.128Z,1513239970.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:10.147Z,1513239970.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:10.542Z,1513239970.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:10.596Z,1513239970.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:10.936Z,1513239970.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:10.987Z,1513239970.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:11.341Z,1513239971.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:11.356Z,1513239971.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:11.742Z,1513239971.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:11.803Z,1513239971.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:12.115Z,1513239972.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:12.150Z,1513239972.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:12.541Z,1513239972.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:12.592Z,1513239972.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:12.930Z,1513239972.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:12.954Z,1513239972.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:13.329Z,1513239973.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:13.343Z,1513239973.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:13.723Z,1513239973.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:13.737Z,1513239973.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:14.123Z,1513239974.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:14.143Z,1513239974.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:14.546Z,1513239974.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:14.560Z,1513239974.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:14.955Z,1513239974.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:14.979Z,1513239974.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:15.338Z,1513239975.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:15.353Z,1513239975.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:15.746Z,1513239975.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:15.760Z,1513239975.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:16.131Z,1513239976.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:16.146Z,1513239976.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:16.548Z,1513239976.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:16.628Z,1513239976.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:16.970Z,1513239976.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:16.985Z,1513239976.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:17.332Z,1513239977.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:17.347Z,1513239977.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:17.751Z,1513239977.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:17.801Z,1513239977.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:18.174Z,1513239978.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:18.202Z,1513239978.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:18.527Z,1513239978.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:18.559Z,1513239978.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:18.935Z,1513239978.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:18.971Z,1513239978.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:19.331Z,1513239979.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:19.375Z,1513239979.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:19.732Z,1513239979.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:19.770Z,1513239979.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:20.136Z,1513239980.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:20.202Z,1513239980.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:20.537Z,1513239980.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:20.611Z,1513239980.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:20.930Z,1513239980.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:20.993Z,1513239980.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:21.333Z,1513239981.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:21.368Z,1513239981.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:21.735Z,1513239981.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:21.798Z,1513239981.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:22.126Z,1513239982.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:22.149Z,1513239982.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:22.538Z,1513239982.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:22.604Z,1513239982.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:22.965Z,1513239982.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:23.011Z,1513239983.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:23.327Z,1513239983.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:23.367Z,1513239983.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:23.741Z,1513239983.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:23.771Z,1513239983.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:24.161Z,1513239984.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:24.181Z,1513239984.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:24.574Z,1513239984.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:24.596Z,1513239984.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:24.935Z,1513239984.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:24.977Z,1513239984.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:25.357Z,1513239985.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:25.388Z,1513239985.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:25.730Z,1513239985.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:25.760Z,1513239985.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:26.146Z,1513239986.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:26.160Z,1513239986.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:26.546Z,1513239986.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:26.603Z,1513239986.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:26.958Z,1513239986.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:26.974Z,1513239986.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:27.333Z,1513239987.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:27.363Z,1513239987.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:27.752Z,1513239987.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:27.767Z,1513239987.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:28.135Z,1513239988.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:28.164Z,1513239988.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:28.573Z,1513239988.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:28.627Z,1513239988.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:28.958Z,1513239988.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:28.990Z,1513239988.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:29.331Z,1513239989.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:29.366Z,1513239989.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:29.727Z,1513239989.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:29.779Z,1513239989.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:30.127Z,1513239990.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:30.151Z,1513239990.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:30.567Z,1513239990.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:30.606Z,1513239990.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:30.955Z,1513239990.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:31.032Z,1513239991.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:31.361Z,1513239991.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:31.384Z,1513239991.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:31.728Z,1513239991.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:31.843Z,1513239991.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:32.127Z,1513239992.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:32.196Z,1513239992.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:32.532Z,1513239992.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:32.587Z,1513239992.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:32.940Z,1513239992.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:32.992Z,1513239992.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:33.362Z,1513239993.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:33.427Z,1513239993.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:33.736Z,1513239993.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:33.813Z,1513239993.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:34.132Z,1513239994.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:34.171Z,1513239994.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:34.539Z,1513239994.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:34.577Z,1513239994.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:34.963Z,1513239994.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:35.011Z,1513239995.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:35.337Z,1513239995.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:35.387Z,1513239995.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:35.738Z,1513239995.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:35.790Z,1513239995.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:36.130Z,1513239996.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:36.163Z,1513239996.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:36.543Z,1513239996.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:36.629Z,1513239996.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:36.947Z,1513239996.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:36.984Z,1513239996.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:37.343Z,1513239997.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:37.383Z,1513239997.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:37.738Z,1513239997.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:37.759Z,1513239997.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:38.127Z,1513239998.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:38.184Z,1513239998.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:38.541Z,1513239998.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:38.591Z,1513239998.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:38.939Z,1513239998.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:38.968Z,1513239998.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:39.341Z,1513239999.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:39.365Z,1513239999.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:39.732Z,1513239999.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:39.767Z,1513239999.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:40.130Z,1513240000.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:40.159Z,1513240000.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:40.542Z,1513240000.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:40.592Z,1513240000.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:40.938Z,1513240000.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:40.963Z,1513240000.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:41.341Z,1513240001.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:41.367Z,1513240001.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:41.727Z,1513240001.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:41.802Z,1513240001.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:42.116Z,1513240002.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:42.154Z,1513240002.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:42.555Z,1513240002.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:42.605Z,1513240002.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:42.936Z,1513240002.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:42.960Z,1513240002.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:43.339Z,1513240003.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:43.359Z,1513240003.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:43.734Z,1513240003.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:43.769Z,1513240003.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:44.122Z,1513240004.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:44.136Z,1513240004.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:44.622Z,1513240004.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:44.670Z,1513240004.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:44.946Z,1513240004.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:44.981Z,1513240004.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:45.333Z,1513240005.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:45.348Z,1513240005.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:45.734Z,1513240005.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:45.749Z,1513240005.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:46.125Z,1513240006.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:46.143Z,1513240006.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:49.626Z,1513240009.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:49.643Z,1513240009.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:49.769Z,1513240009.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:49.803Z,1513240009.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:50.119Z,1513240010.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:50.134Z,1513240010.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:50.573Z,1513240010.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:50.603Z,1513240010.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:50.901Z,1513240010.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:50.925Z,1513240010.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:51.301Z,1513240011.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:51.317Z,1513240011.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:51.699Z,1513240011.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:51.724Z,1513240011.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:52.109Z,1513240012.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:52.138Z,1513240012.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:52.557Z,1513240012.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:52.626Z,1513240012.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:52.924Z,1513240012.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:52.983Z,1513240012.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:53.291Z,1513240013.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:53.327Z,1513240013.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:53.694Z,1513240013.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:53.743Z,1513240013.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:54.138Z,1513240014.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:54.171Z,1513240014.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:54.545Z,1513240014.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:54.617Z,1513240014.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:54.914Z,1513240014.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:54.935Z,1513240014.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:55.317Z,1513240015.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:55.333Z,1513240015.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:55.714Z,1513240015.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:55.728Z,1513240015.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:56.091Z,1513240016.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:56.132Z,1513240016.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:56.549Z,1513240016.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:56.587Z,1513240016.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:56.930Z,1513240016.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:56.944Z,1513240016.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:57.338Z,1513240017.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:57.366Z,1513240017.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:57.713Z,1513240017.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:57.746Z,1513240017.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:58.103Z,1513240018.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:58.123Z,1513240018.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:58.536Z,1513240018.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:58.596Z,1513240018.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:58.908Z,1513240018.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:58.924Z,1513240018.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:59.306Z,1513240019.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:59.322Z,1513240019.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:26:59.714Z,1513240019.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:26:59.747Z,1513240019.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:00.098Z,1513240020.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:00.113Z,1513240020.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:00.540Z,1513240020.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:00.568Z,1513240020.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:00.903Z,1513240020.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:00.941Z,1513240020.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:01.315Z,1513240021.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:01.329Z,1513240021.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:01.715Z,1513240021.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:01.735Z,1513240021.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:02.104Z,1513240022.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:02.120Z,1513240022.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:02.491Z,1513240022.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:02.516Z,1513240022.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:02.907Z,1513240022.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:02.966Z,1513240022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:03.310Z,1513240023.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:03.325Z,1513240023.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:03.751Z,1513240023.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:03.801Z,1513240023.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:04.087Z,1513240024.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:04.110Z,1513240024.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:04.125Z,1513240024.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:04.546Z,1513240024.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:04.574Z,1513240024.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:04.881Z,1513240024.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:04.913Z,1513240024.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:04.941Z,1513240024.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:05.285Z,1513240025.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:05.319Z,1513240025.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:05.334Z,1513240025.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:05.711Z,1513240025.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:05.726Z,1513240025.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:06.093Z,1513240026.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:06.131Z,1513240026.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:06.550Z,1513240026.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:06.569Z,1513240026.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:06.927Z,1513240026.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:06.963Z,1513240026.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:07.315Z,1513240027.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:07.331Z,1513240027.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:07.709Z,1513240027.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:07.736Z,1513240027.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:08.119Z,1513240028.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:08.134Z,1513240028.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:08.534Z,1513240028.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:08.549Z,1513240028.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:08.895Z,1513240028.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:08.911Z,1513240028.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:09.296Z,1513240029.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:09.311Z,1513240029.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:09.701Z,1513240029.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:09.716Z,1513240029.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:10.147Z,1513240030.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:10.171Z,1513240030.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:10.546Z,1513240030.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:10.567Z,1513240030.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:10.924Z,1513240030.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:10.950Z,1513240030.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:11.302Z,1513240031.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:11.319Z,1513240031.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:11.702Z,1513240031.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:11.718Z,1513240031.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:12.095Z,1513240032.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:12.128Z,1513240032.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:12.512Z,1513240032.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:12.576Z,1513240032.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:12.927Z,1513240032.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:12.967Z,1513240032.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:13.323Z,1513240033.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:13.376Z,1513240033.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:13.714Z,1513240033.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:13.819Z,1513240033.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:14.096Z,1513240034.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:14.127Z,1513240034.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:14.495Z,1513240034.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:14.532Z,1513240034.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:14.903Z,1513240034.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:14.973Z,1513240034.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:15.326Z,1513240035.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:15.341Z,1513240035.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:15.715Z,1513240035.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:15.755Z,1513240035.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:16.098Z,1513240036.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:16.125Z,1513240036.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:16.516Z,1513240036.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:16.595Z,1513240036.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:16.906Z,1513240036.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:16.921Z,1513240036.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:17.318Z,1513240037.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:17.344Z,1513240037.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:17.702Z,1513240037.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:17.717Z,1513240037.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:18.099Z,1513240038.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:18.113Z,1513240038.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:18.533Z,1513240038.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:18.556Z,1513240038.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:18.914Z,1513240038.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:18.929Z,1513240038.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:19.317Z,1513240039.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:19.339Z,1513240039.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:19.723Z,1513240039.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:19.750Z,1513240039.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:20.092Z,1513240040.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:20.215Z,1513240040.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:20.532Z,1513240040.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:20.563Z,1513240040.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:20.908Z,1513240040.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:20.936Z,1513240040.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:21.316Z,1513240041.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:21.343Z,1513240041.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:21.713Z,1513240041.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:21.736Z,1513240041.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:22.094Z,1513240042.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:22.121Z,1513240042.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:22.542Z,1513240042.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:22.580Z,1513240042.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:22.908Z,1513240042.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:22.940Z,1513240042.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:23.305Z,1513240043.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:23.320Z,1513240043.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:23.706Z,1513240043.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:23.720Z,1513240043.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:24.102Z,1513240044.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:24.117Z,1513240044.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:24.553Z,1513240044.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:24.618Z,1513240044.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:24.910Z,1513240044.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:24.926Z,1513240044.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:25.312Z,1513240045.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:25.328Z,1513240045.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:25.713Z,1513240045.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:25.755Z,1513240045.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:26.119Z,1513240046.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:26.158Z,1513240046.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:26.496Z,1513240046.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:26.635Z,1513240046.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:26.903Z,1513240046.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:26.918Z,1513240046.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:27.313Z,1513240047.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:27.328Z,1513240047.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:27.705Z,1513240047.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:27.728Z,1513240047.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:28.099Z,1513240048.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:28.114Z,1513240048.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:28.501Z,1513240048.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:28.520Z,1513240048.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:28.916Z,1513240048.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:28.964Z,1513240048.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:29.316Z,1513240049.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:29.367Z,1513240049.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:29.710Z,1513240049.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:29.731Z,1513240049.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:30.096Z,1513240050.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:30.122Z,1513240050.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:30.491Z,1513240050.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:30.516Z,1513240050.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:30.919Z,1513240050.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:30.951Z,1513240050.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:31.320Z,1513240051.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:31.334Z,1513240051.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:31.703Z,1513240051.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:31.739Z,1513240051.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:32.096Z,1513240052.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:32.131Z,1513240052.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:32.561Z,1513240052.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:32.629Z,1513240052.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:32.922Z,1513240052.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:32.944Z,1513240052.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:33.313Z,1513240053.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:33.344Z,1513240053.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:33.709Z,1513240053.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:33.724Z,1513240053.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:34.099Z,1513240054.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:34.114Z,1513240054.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:34.546Z,1513240054.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:34.574Z,1513240054.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:34.909Z,1513240054.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:34.932Z,1513240054.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:35.310Z,1513240055.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:35.331Z,1513240055.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:35.710Z,1513240055.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:35.807Z,1513240055.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:36.119Z,1513240056.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:36.139Z,1513240056.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:36.553Z,1513240056.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:36.588Z,1513240056.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:36.891Z,1513240056.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:36.927Z,1513240056.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:37.296Z,1513240057.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:37.339Z,1513240057.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:37.695Z,1513240057.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:37.726Z,1513240057.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:38.114Z,1513240058.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:38.176Z,1513240058.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:38.551Z,1513240058.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:38.578Z,1513240058.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:38.918Z,1513240058.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:38.979Z,1513240058.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:39.291Z,1513240059.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:39.335Z,1513240059.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:39.695Z,1513240059.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:39.733Z,1513240059.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:40.086Z,1513240060.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:40.100Z,1513240060.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:40.496Z,1513240060.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:40.583Z,1513240060.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:40.899Z,1513240060.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:40.927Z,1513240060.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:41.307Z,1513240061.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:41.327Z,1513240061.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:41.709Z,1513240061.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:41.725Z,1513240061.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:42.132Z,1513240062.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:42.163Z,1513240062.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:42.500Z,1513240062.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:42.515Z,1513240062.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:42.894Z,1513240062.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:42.925Z,1513240062.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:43.298Z,1513240063.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:43.325Z,1513240063.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:43.688Z,1513240063.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:43.708Z,1513240063.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:44.038Z,1513240064.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:44.121Z,1513240064.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:44.135Z,1513240064.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:44.519Z,1513240064.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:44.534Z,1513240064.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:44.835Z,1513240064.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:44.915Z,1513240064.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:44.939Z,1513240064.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:45.245Z,1513240065.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:45.333Z,1513240065.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:45.364Z,1513240065.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:45.703Z,1513240065.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:45.723Z,1513240065.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:46.045Z,1513240066.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:46.094Z,1513240066.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:46.131Z,1513240066.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:46.602Z,1513240066.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:46.662Z,1513240066.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:46.841Z,1513240066.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:47.245Z,1513240067.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:49.974Z,1513240069.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:50.011Z,1513240070.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:50.115Z,1513240070.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:50.158Z,1513240070.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:50.531Z,1513240070.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:50.563Z,1513240070.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:50.870Z,1513240070.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:50.895Z,1513240070.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:51.267Z,1513240071.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:51.287Z,1513240071.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:51.672Z,1513240071.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:51.687Z,1513240071.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:52.080Z,1513240072.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:52.096Z,1513240072.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:52.516Z,1513240072.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:52.564Z,1513240072.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:52.879Z,1513240072.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:52.913Z,1513240072.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:53.263Z,1513240073.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:53.300Z,1513240073.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:53.663Z,1513240073.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:53.678Z,1513240073.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:54.067Z,1513240074.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:54.106Z,1513240074.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:54.464Z,1513240074.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:54.554Z,1513240074.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:54.919Z,1513240074.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:54.965Z,1513240074.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:55.283Z,1513240075.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:55.314Z,1513240075.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:55.670Z,1513240075.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:55.684Z,1513240075.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:56.070Z,1513240076.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:56.084Z,1513240076.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:56.470Z,1513240076.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:56.484Z,1513240076.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:56.892Z,1513240076.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:56.935Z,1513240076.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:57.262Z,1513240077.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:57.299Z,1513240077.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:57.659Z,1513240077.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:57.691Z,1513240077.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:58.095Z,1513240078.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:58.167Z,1513240078.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:58.481Z,1513240078.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:58.503Z,1513240078.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:58.916Z,1513240078.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:58.951Z,1513240078.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:59.263Z,1513240079.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:59.299Z,1513240079.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:27:59.667Z,1513240079.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:27:59.682Z,1513240079.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:00.056Z,1513240080.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:00.073Z,1513240080.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:00.526Z,1513240080.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:00.553Z,1513240080.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:00.868Z,1513240080.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:00.882Z,1513240080.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:01.274Z,1513240081.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:01.329Z,1513240081.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:01.674Z,1513240081.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:01.699Z,1513240081.699 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:28:01.699Z,1513240081.699 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:28:01.699Z,1513240081.699 [BPC1](ERROR): Communications Fault
2017-12-14T08:28:01.732Z,1513240081.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:01.746Z,1513240081.746 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:28:02.074Z,1513240082.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:02.089Z,1513240082.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:02.509Z,1513240082.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:02.546Z,1513240082.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:02.856Z,1513240082.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:02.879Z,1513240082.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:02.894Z,1513240082.894 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:28:02.894Z,1513240082.894 [BPC1] No Fault, FailCount= 1
2017-12-14T08:28:03.264Z,1513240083.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:03.331Z,1513240083.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:03.660Z,1513240083.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:03.675Z,1513240083.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:04.116Z,1513240084.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:04.148Z,1513240084.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:04.549Z,1513240084.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:04.619Z,1513240084.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:04.900Z,1513240084.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:04.915Z,1513240084.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:05.258Z,1513240085.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:05.272Z,1513240085.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:05.662Z,1513240085.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:05.678Z,1513240085.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:06.063Z,1513240086.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:06.077Z,1513240086.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:06.480Z,1513240086.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:06.552Z,1513240086.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:06.869Z,1513240086.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:06.884Z,1513240086.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:07.277Z,1513240087.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:07.308Z,1513240087.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:07.682Z,1513240087.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:07.713Z,1513240087.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:08.089Z,1513240088.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:08.120Z,1513240088.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:08.480Z,1513240088.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:08.499Z,1513240088.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:08.863Z,1513240088.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:08.878Z,1513240088.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:09.267Z,1513240089.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:09.281Z,1513240089.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:09.668Z,1513240089.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:09.703Z,1513240089.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:10.066Z,1513240090.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:10.082Z,1513240090.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:10.481Z,1513240090.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:10.506Z,1513240090.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:10.895Z,1513240090.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:10.930Z,1513240090.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:11.257Z,1513240091.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:11.288Z,1513240091.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:11.680Z,1513240091.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:11.733Z,1513240091.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:12.064Z,1513240092.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:12.093Z,1513240092.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:12.461Z,1513240092.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:12.553Z,1513240092.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:12.893Z,1513240092.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:12.929Z,1513240092.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:13.284Z,1513240093.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:13.298Z,1513240093.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:13.682Z,1513240093.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:13.696Z,1513240093.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:14.089Z,1513240094.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:14.103Z,1513240094.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:14.496Z,1513240094.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:14.549Z,1513240094.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:14.868Z,1513240094.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:14.895Z,1513240094.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:15.260Z,1513240095.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:15.286Z,1513240095.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:15.659Z,1513240095.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:15.686Z,1513240095.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:16.074Z,1513240096.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:16.101Z,1513240096.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:16.517Z,1513240096.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:16.559Z,1513240096.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:16.894Z,1513240096.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:16.915Z,1513240096.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:17.265Z,1513240097.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:17.299Z,1513240097.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:17.664Z,1513240097.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:17.702Z,1513240097.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:18.076Z,1513240098.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:18.103Z,1513240098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:18.473Z,1513240098.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:18.544Z,1513240098.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:18.870Z,1513240098.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:18.897Z,1513240098.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:19.278Z,1513240099.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:19.293Z,1513240099.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:19.674Z,1513240099.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:19.689Z,1513240099.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:20.078Z,1513240100.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:20.094Z,1513240100.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:20.520Z,1513240100.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:20.564Z,1513240100.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:20.901Z,1513240100.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:20.940Z,1513240100.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:21.261Z,1513240101.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:21.297Z,1513240101.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:21.665Z,1513240101.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:21.694Z,1513240101.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:22.084Z,1513240102.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:22.108Z,1513240102.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:22.481Z,1513240102.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:22.569Z,1513240102.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:22.882Z,1513240102.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:22.913Z,1513240102.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:23.268Z,1513240103.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:23.284Z,1513240103.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:23.658Z,1513240103.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:23.712Z,1513240103.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:24.079Z,1513240104.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:24.120Z,1513240104.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:24.475Z,1513240104.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:24.535Z,1513240104.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:24.896Z,1513240104.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:24.919Z,1513240104.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:25.278Z,1513240105.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:25.327Z,1513240105.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:25.678Z,1513240105.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:25.693Z,1513240105.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:26.062Z,1513240106.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:26.082Z,1513240106.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:26.096Z,1513240106.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:26.468Z,1513240106.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:26.494Z,1513240106.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:26.859Z,1513240106.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:26.890Z,1513240106.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:26.929Z,1513240106.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:27.260Z,1513240107.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:27.289Z,1513240107.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:27.348Z,1513240107.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:27.659Z,1513240107.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:27.695Z,1513240107.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:28.087Z,1513240108.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:28.089Z,1513240108.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:28.105Z,1513240108.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:28.501Z,1513240108.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:28.567Z,1513240108.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:28.873Z,1513240108.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:28.882Z,1513240108.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:28.891Z,1513240108.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:29.266Z,1513240109.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:29.285Z,1513240109.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:29.287Z,1513240109.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:29.671Z,1513240109.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:29.685Z,1513240109.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:30.067Z,1513240110.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:30.087Z,1513240110.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:30.518Z,1513240110.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:30.585Z,1513240110.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:30.869Z,1513240110.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:30.886Z,1513240110.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:31.274Z,1513240111.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:31.289Z,1513240111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:31.677Z,1513240111.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:31.693Z,1513240111.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:32.073Z,1513240112.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:32.095Z,1513240112.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:32.505Z,1513240112.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:32.557Z,1513240112.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:32.863Z,1513240112.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:32.898Z,1513240112.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:33.260Z,1513240113.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:33.296Z,1513240113.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:33.663Z,1513240113.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:33.716Z,1513240113.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:34.070Z,1513240114.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:34.100Z,1513240114.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:34.522Z,1513240114.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:34.544Z,1513240114.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:34.876Z,1513240114.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:34.899Z,1513240114.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:35.274Z,1513240115.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:35.289Z,1513240115.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:35.667Z,1513240115.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:35.682Z,1513240115.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:36.064Z,1513240116.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:36.085Z,1513240116.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:36.472Z,1513240116.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:36.487Z,1513240116.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:36.858Z,1513240116.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:36.907Z,1513240116.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:37.274Z,1513240117.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:37.295Z,1513240117.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:37.677Z,1513240117.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:37.704Z,1513240117.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:38.095Z,1513240118.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:38.115Z,1513240118.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:38.463Z,1513240118.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:38.478Z,1513240118.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:38.905Z,1513240118.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:38.938Z,1513240118.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:39.268Z,1513240119.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:39.299Z,1513240119.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:39.667Z,1513240119.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:39.681Z,1513240119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:40.062Z,1513240120.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:40.099Z,1513240120.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:40.127Z,1513240120.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:40.481Z,1513240120.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:40.515Z,1513240120.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:40.858Z,1513240120.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:40.912Z,1513240120.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:40.939Z,1513240120.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:41.261Z,1513240121.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:41.268Z,1513240121.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:41.283Z,1513240121.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:41.666Z,1513240121.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:41.685Z,1513240121.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:42.058Z,1513240122.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:42.067Z,1513240122.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:42.089Z,1513240122.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:42.522Z,1513240122.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:42.554Z,1513240122.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:42.853Z,1513240122.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:42.874Z,1513240122.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:43.072Z,1513240123.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:43.257Z,1513240123.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:43.315Z,1513240123.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:43.362Z,1513240123.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:43.682Z,1513240123.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:43.709Z,1513240123.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:44.081Z,1513240124.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:44.111Z,1513240124.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:44.499Z,1513240124.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:44.549Z,1513240124.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:44.868Z,1513240124.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:44.885Z,1513240124.885 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T08:28:44.885Z,1513240124.885 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:28:44.885Z,1513240124.885 [BPC1](ERROR): Data Fault
2017-12-14T08:28:44.901Z,1513240124.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:44.924Z,1513240124.924 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:28:45.261Z,1513240125.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:45.296Z,1513240125.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:45.298Z,1513240125.298 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:45.298Z,1513240125.298 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 159
2017-12-14T08:28:45.298Z,1513240125.298 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:28:45.300Z,1513240125.300 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:45.300Z,1513240125.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2017-12-14T08:28:45.300Z,1513240125.300 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:28:45.312Z,1513240125.312 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:28:45.313Z,1513240125.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:28:45.659Z,1513240125.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:45.697Z,1513240125.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:45.697Z,1513240125.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159
2017-12-14T08:28:45.697Z,1513240125.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:28:45.709Z,1513240125.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:28:45.709Z,1513240125.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:28:45.709Z,1513240125.709 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 159
2017-12-14T08:28:45.710Z,1513240125.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:28:45.710Z,1513240125.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2017-12-14T08:28:46.070Z,1513240126.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:46.108Z,1513240126.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:28:46.108Z,1513240126.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:28:46.109Z,1513240126.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:28:46.109Z,1513240126.109 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:28:46.110Z,1513240126.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:28:46.110Z,1513240126.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:28:46.112Z,1513240126.112 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:23:45.7Z
2017-12-14T08:28:46.112Z,1513240126.112 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T08:28:46.112Z,1513240126.112 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T08:28:46.122Z,1513240126.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:28:46.122Z,1513240126.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159
2017-12-14T08:28:46.123Z,1513240126.123 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:28:46.123Z,1513240126.123 [BPC1] No Fault, FailCount= 1
2017-12-14T08:28:46.527Z,1513240126.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:46.647Z,1513240126.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:28:46.648Z,1513240126.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:28:46.648Z,1513240126.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:28:47.373Z,1513240127.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:47.408Z,1513240127.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:50.659Z,1513240130.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:50.680Z,1513240130.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:51.372Z,1513240131.372 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0184.lzma
2017-12-14T08:28:51.411Z,1513240131.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:51.425Z,1513240131.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:51.530Z,1513240131.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:51.578Z,1513240131.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:51.860Z,1513240131.860 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0184.lzma.bak
2017-12-14T08:28:51.860Z,1513240131.860 [DataOverHttps](INFO): SBD MOMSN=5438355
2017-12-14T08:28:51.893Z,1513240131.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:51.946Z,1513240131.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:53.229Z,1513240133.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:53.244Z,1513240133.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:53.336Z,1513240133.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:53.378Z,1513240133.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:56.896Z,1513240136.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:56.947Z,1513240136.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:57.045Z,1513240137.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:57.079Z,1513240137.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:57.430Z,1513240137.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:57.446Z,1513240137.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:57.845Z,1513240137.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:57.878Z,1513240137.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:58.234Z,1513240138.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:58.249Z,1513240138.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:28:58.628Z,1513240138.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:28:58.647Z,1513240138.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:02.076Z,1513240142.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:02.090Z,1513240142.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:02.169Z,1513240142.169 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0185.lzma
2017-12-14T08:29:02.191Z,1513240142.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:02.235Z,1513240142.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:02.577Z,1513240142.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:02.619Z,1513240142.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:02.919Z,1513240142.919 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0185.lzma.bak
2017-12-14T08:29:02.920Z,1513240142.920 [DataOverHttps](INFO): SBD MOMSN=5438357
2017-12-14T08:29:02.958Z,1513240142.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:02.986Z,1513240142.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:04.078Z,1513240144.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:04.107Z,1513240144.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:04.110Z,1513240144.110 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T08:29:04.111Z,1513240144.111 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T08:29:04.111Z,1513240144.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T08:29:04.210Z,1513240144.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:04.254Z,1513240144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:07.726Z,1513240147.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:07.757Z,1513240147.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:07.842Z,1513240147.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:07.882Z,1513240147.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:08.226Z,1513240148.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:08.241Z,1513240148.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:08.629Z,1513240148.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:08.651Z,1513240148.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:09.024Z,1513240149.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:09.135Z,1513240149.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:09.408Z,1513240149.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:09.439Z,1513240149.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:09.808Z,1513240149.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:09.864Z,1513240149.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:10.212Z,1513240150.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:10.238Z,1513240150.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:10.639Z,1513240150.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:10.692Z,1513240150.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:11.032Z,1513240151.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:11.051Z,1513240151.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:11.064Z,1513240151.064 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:29:11.433Z,1513240151.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:11.448Z,1513240151.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:11.807Z,1513240151.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:11.840Z,1513240151.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:12.266Z,1513240152.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:12.303Z,1513240152.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:12.624Z,1513240152.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:12.649Z,1513240152.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:13.018Z,1513240153.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:13.040Z,1513240153.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:13.432Z,1513240153.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:13.448Z,1513240153.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:13.830Z,1513240153.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:13.848Z,1513240153.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:14.230Z,1513240154.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:14.252Z,1513240154.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:14.622Z,1513240154.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:14.641Z,1513240154.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:15.017Z,1513240155.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:15.048Z,1513240155.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:15.460Z,1513240155.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:15.500Z,1513240155.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:15.825Z,1513240155.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:15.848Z,1513240155.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:16.215Z,1513240156.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:16.237Z,1513240156.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:16.616Z,1513240156.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:16.630Z,1513240156.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:17.046Z,1513240157.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:17.060Z,1513240157.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:17.430Z,1513240157.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:17.463Z,1513240157.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:17.827Z,1513240157.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:17.854Z,1513240157.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:18.225Z,1513240158.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:18.260Z,1513240158.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:18.632Z,1513240158.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:18.663Z,1513240158.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:19.008Z,1513240159.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:19.055Z,1513240159.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:19.418Z,1513240159.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:19.439Z,1513240159.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:19.822Z,1513240159.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:19.846Z,1513240159.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:20.219Z,1513240160.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:20.247Z,1513240160.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:20.608Z,1513240160.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:20.628Z,1513240160.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:21.007Z,1513240161.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:21.035Z,1513240161.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:21.418Z,1513240161.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:21.439Z,1513240161.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:21.820Z,1513240161.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:21.835Z,1513240161.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:22.225Z,1513240162.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:22.261Z,1513240162.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:22.614Z,1513240162.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:22.645Z,1513240162.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:23.012Z,1513240163.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:23.028Z,1513240163.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:23.426Z,1513240163.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:23.447Z,1513240163.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:23.825Z,1513240163.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:23.855Z,1513240163.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:24.225Z,1513240164.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:24.307Z,1513240164.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:24.609Z,1513240164.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:24.624Z,1513240164.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:25.060Z,1513240165.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:25.104Z,1513240165.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:25.430Z,1513240165.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:25.447Z,1513240165.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:25.823Z,1513240165.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:25.842Z,1513240165.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:26.227Z,1513240166.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:26.247Z,1513240166.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:26.629Z,1513240166.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:26.643Z,1513240166.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:27.028Z,1513240167.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:27.051Z,1513240167.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:27.424Z,1513240167.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:27.445Z,1513240167.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:27.830Z,1513240167.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:27.909Z,1513240167.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:28.226Z,1513240168.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:28.263Z,1513240168.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:28.608Z,1513240168.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:28.639Z,1513240168.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:29.008Z,1513240169.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:29.023Z,1513240169.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:29.419Z,1513240169.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:29.455Z,1513240169.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:29.822Z,1513240169.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:29.843Z,1513240169.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:30.221Z,1513240170.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:30.259Z,1513240170.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:30.608Z,1513240170.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:30.627Z,1513240170.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:31.013Z,1513240171.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:31.071Z,1513240171.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:31.466Z,1513240171.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:31.566Z,1513240171.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:31.822Z,1513240171.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:31.843Z,1513240171.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:32.223Z,1513240172.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:32.238Z,1513240172.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:32.615Z,1513240172.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:32.670Z,1513240172.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:33.019Z,1513240173.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:33.034Z,1513240173.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:33.421Z,1513240173.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:33.475Z,1513240173.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:33.825Z,1513240173.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:33.839Z,1513240173.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:34.222Z,1513240174.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:34.236Z,1513240174.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:34.614Z,1513240174.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:34.639Z,1513240174.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:35.016Z,1513240175.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:35.052Z,1513240175.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:35.429Z,1513240175.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:35.443Z,1513240175.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:35.829Z,1513240175.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:35.844Z,1513240175.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:36.221Z,1513240176.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:36.248Z,1513240176.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:36.613Z,1513240176.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:36.644Z,1513240176.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:37.019Z,1513240177.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:37.052Z,1513240177.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:37.421Z,1513240177.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:37.460Z,1513240177.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:37.821Z,1513240177.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:37.895Z,1513240177.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:38.240Z,1513240178.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:38.254Z,1513240178.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:38.650Z,1513240178.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:38.711Z,1513240178.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:39.015Z,1513240179.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:39.030Z,1513240179.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:39.422Z,1513240179.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:39.436Z,1513240179.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:39.822Z,1513240179.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:39.836Z,1513240179.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:40.221Z,1513240180.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:40.243Z,1513240180.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:40.622Z,1513240180.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:40.637Z,1513240180.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:41.042Z,1513240181.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:41.094Z,1513240181.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:41.423Z,1513240181.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:41.438Z,1513240181.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:41.825Z,1513240181.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:41.871Z,1513240181.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:42.243Z,1513240182.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:42.301Z,1513240182.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:42.610Z,1513240182.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:42.642Z,1513240182.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:43.008Z,1513240183.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:43.050Z,1513240183.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:43.435Z,1513240183.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:43.452Z,1513240183.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:43.830Z,1513240183.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:43.852Z,1513240183.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:44.220Z,1513240184.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:44.298Z,1513240184.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:44.616Z,1513240184.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:44.643Z,1513240184.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:45.011Z,1513240185.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:45.047Z,1513240185.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:45.429Z,1513240185.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:45.459Z,1513240185.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:45.842Z,1513240185.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:45.856Z,1513240185.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:46.221Z,1513240186.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:46.253Z,1513240186.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:46.618Z,1513240186.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:46.650Z,1513240186.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:47.014Z,1513240187.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:47.029Z,1513240187.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:47.425Z,1513240187.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:47.495Z,1513240187.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:47.829Z,1513240187.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:47.860Z,1513240187.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:48.230Z,1513240188.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:48.250Z,1513240188.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:48.615Z,1513240188.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:48.635Z,1513240188.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:49.016Z,1513240189.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:49.031Z,1513240189.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:49.423Z,1513240189.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:49.443Z,1513240189.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:49.826Z,1513240189.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:49.840Z,1513240189.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:50.222Z,1513240190.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:50.237Z,1513240190.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:50.641Z,1513240190.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:50.669Z,1513240190.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:51.015Z,1513240191.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:51.036Z,1513240191.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:51.426Z,1513240191.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:51.447Z,1513240191.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:51.826Z,1513240191.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:51.842Z,1513240191.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:52.226Z,1513240192.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:52.248Z,1513240192.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:52.621Z,1513240192.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:52.649Z,1513240192.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:53.023Z,1513240193.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:53.043Z,1513240193.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:53.429Z,1513240193.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:53.451Z,1513240193.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:53.822Z,1513240193.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:53.904Z,1513240193.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:54.232Z,1513240194.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:54.295Z,1513240194.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:54.608Z,1513240194.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:54.636Z,1513240194.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:55.027Z,1513240195.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:55.042Z,1513240195.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:55.433Z,1513240195.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:55.478Z,1513240195.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:55.835Z,1513240195.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:55.850Z,1513240195.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:56.230Z,1513240196.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:56.279Z,1513240196.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:56.608Z,1513240196.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:56.643Z,1513240196.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:57.018Z,1513240197.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:57.081Z,1513240197.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:57.418Z,1513240197.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:57.440Z,1513240197.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:57.823Z,1513240197.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:57.854Z,1513240197.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:58.218Z,1513240198.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:58.234Z,1513240198.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:58.618Z,1513240198.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:58.632Z,1513240198.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:59.014Z,1513240199.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:59.030Z,1513240199.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:59.422Z,1513240199.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:59.437Z,1513240199.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:29:59.822Z,1513240199.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:29:59.837Z,1513240199.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:00.253Z,1513240200.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:00.272Z,1513240200.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:00.617Z,1513240200.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:00.631Z,1513240200.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:01.011Z,1513240201.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:01.038Z,1513240201.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:01.427Z,1513240201.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:01.442Z,1513240201.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:01.822Z,1513240201.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:01.846Z,1513240201.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:02.246Z,1513240202.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:02.281Z,1513240202.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:02.619Z,1513240202.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:02.634Z,1513240202.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:03.007Z,1513240203.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:03.032Z,1513240203.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:03.435Z,1513240203.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:03.459Z,1513240203.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:03.821Z,1513240203.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:03.859Z,1513240203.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:04.215Z,1513240204.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:04.241Z,1513240204.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:04.616Z,1513240204.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:04.668Z,1513240204.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:08.091Z,1513240208.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:08.106Z,1513240208.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:08.214Z,1513240208.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:08.247Z,1513240208.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:08.572Z,1513240208.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:08.587Z,1513240208.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:08.978Z,1513240208.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:09.006Z,1513240209.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:09.353Z,1513240209.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:09.368Z,1513240209.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:09.755Z,1513240209.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:09.770Z,1513240209.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:10.158Z,1513240210.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:10.174Z,1513240210.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:10.566Z,1513240210.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:10.603Z,1513240210.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:10.972Z,1513240210.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:11.004Z,1513240211.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:11.373Z,1513240211.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:11.405Z,1513240211.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:11.757Z,1513240211.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:11.772Z,1513240211.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:12.158Z,1513240212.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:12.181Z,1513240212.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:12.566Z,1513240212.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:12.581Z,1513240212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:13.006Z,1513240213.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:13.030Z,1513240213.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:13.366Z,1513240213.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:13.381Z,1513240213.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:13.766Z,1513240213.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:13.780Z,1513240213.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:14.165Z,1513240214.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:14.180Z,1513240214.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:14.586Z,1513240214.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:14.626Z,1513240214.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:14.952Z,1513240214.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:14.980Z,1513240214.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:15.355Z,1513240215.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:15.392Z,1513240215.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:15.765Z,1513240215.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:15.800Z,1513240215.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:16.199Z,1513240216.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:16.227Z,1513240216.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:16.585Z,1513240216.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:16.652Z,1513240216.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:16.972Z,1513240216.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:17.043Z,1513240217.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:17.359Z,1513240217.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:17.390Z,1513240217.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:17.758Z,1513240217.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:17.814Z,1513240217.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:18.158Z,1513240218.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:18.172Z,1513240218.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:18.573Z,1513240218.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:18.627Z,1513240218.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:18.973Z,1513240218.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:19.001Z,1513240219.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:19.406Z,1513240219.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:19.445Z,1513240219.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:19.765Z,1513240219.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:19.779Z,1513240219.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:20.155Z,1513240220.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:20.170Z,1513240220.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:20.560Z,1513240220.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:20.615Z,1513240220.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:20.959Z,1513240220.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:20.979Z,1513240220.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:21.359Z,1513240221.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:21.375Z,1513240221.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:21.775Z,1513240221.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:21.804Z,1513240221.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:22.169Z,1513240222.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:22.198Z,1513240222.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:22.563Z,1513240222.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:22.623Z,1513240222.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:22.960Z,1513240222.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:22.975Z,1513240222.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:23.362Z,1513240223.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:23.377Z,1513240223.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:23.760Z,1513240223.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:23.775Z,1513240223.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:24.160Z,1513240224.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:24.176Z,1513240224.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:24.565Z,1513240224.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:24.612Z,1513240224.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:24.966Z,1513240224.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:24.987Z,1513240224.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:25.370Z,1513240225.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:25.391Z,1513240225.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:25.819Z,1513240225.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:25.878Z,1513240225.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:26.144Z,1513240226.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:26.176Z,1513240226.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:26.552Z,1513240226.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:26.582Z,1513240226.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:26.952Z,1513240226.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:27.016Z,1513240227.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:27.363Z,1513240227.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:27.380Z,1513240227.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:27.774Z,1513240227.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:27.795Z,1513240227.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:28.177Z,1513240228.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:28.192Z,1513240228.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:28.610Z,1513240228.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:28.628Z,1513240228.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:28.995Z,1513240228.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:29.035Z,1513240229.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:29.352Z,1513240229.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:29.378Z,1513240229.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:29.750Z,1513240229.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:29.781Z,1513240229.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:30.151Z,1513240230.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:30.187Z,1513240230.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:30.574Z,1513240230.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:30.604Z,1513240230.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:30.985Z,1513240230.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:30.000Z,1513240231.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:31.371Z,1513240231.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:31.387Z,1513240231.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:31.751Z,1513240231.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:31.783Z,1513240231.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:32.173Z,1513240232.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:32.208Z,1513240232.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:32.557Z,1513240232.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:32.594Z,1513240232.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:32.952Z,1513240232.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:32.968Z,1513240232.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:33.359Z,1513240233.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:33.396Z,1513240233.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:33.780Z,1513240233.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:33.796Z,1513240233.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:34.165Z,1513240234.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:34.196Z,1513240234.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:34.566Z,1513240234.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:34.601Z,1513240234.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:34.961Z,1513240234.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:34.976Z,1513240234.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:35.398Z,1513240235.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:35.424Z,1513240235.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:35.760Z,1513240235.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:35.775Z,1513240235.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:36.158Z,1513240236.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:36.173Z,1513240236.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:36.566Z,1513240236.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:36.587Z,1513240236.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:36.977Z,1513240236.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:36.992Z,1513240236.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:37.364Z,1513240237.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:37.391Z,1513240237.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:37.764Z,1513240237.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:37.779Z,1513240237.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:38.163Z,1513240238.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:38.171Z,1513240238.171 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T08:30:38.171Z,1513240238.171 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:30:38.171Z,1513240238.171 [BPC1](ERROR): Data Fault
2017-12-14T08:30:38.179Z,1513240238.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:38.194Z,1513240238.194 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:30:38.617Z,1513240238.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:38.664Z,1513240238.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:38.951Z,1513240238.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:38.983Z,1513240238.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:39.375Z,1513240239.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:39.390Z,1513240239.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:39.404Z,1513240239.404 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:30:39.404Z,1513240239.404 [BPC1] No Fault, FailCount= 1
2017-12-14T08:30:39.774Z,1513240239.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:39.831Z,1513240239.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:40.176Z,1513240240.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:40.191Z,1513240240.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:40.553Z,1513240240.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:40.580Z,1513240240.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:40.952Z,1513240240.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:40.977Z,1513240240.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:41.355Z,1513240241.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:41.381Z,1513240241.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:41.778Z,1513240241.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:41.830Z,1513240241.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:42.165Z,1513240242.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:42.203Z,1513240242.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:42.619Z,1513240242.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:42.633Z,1513240242.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:42.951Z,1513240242.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:42.991Z,1513240242.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:43.353Z,1513240243.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:43.367Z,1513240243.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:43.758Z,1513240243.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:43.772Z,1513240243.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:44.149Z,1513240244.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:44.164Z,1513240244.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:44.569Z,1513240244.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:44.593Z,1513240244.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:45.026Z,1513240245.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:45.051Z,1513240245.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:45.375Z,1513240245.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:45.407Z,1513240245.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:45.757Z,1513240245.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:45.771Z,1513240245.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:46.155Z,1513240246.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:46.170Z,1513240246.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:46.556Z,1513240246.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:46.571Z,1513240246.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:46.972Z,1513240246.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:46.996Z,1513240246.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:47.364Z,1513240247.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:47.400Z,1513240247.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:47.758Z,1513240247.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:47.795Z,1513240247.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:48.213Z,1513240248.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:48.292Z,1513240248.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:48.573Z,1513240248.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:48.607Z,1513240248.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:48.957Z,1513240248.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:48.972Z,1513240248.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:49.360Z,1513240249.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:49.379Z,1513240249.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:49.762Z,1513240249.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:49.777Z,1513240249.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:50.156Z,1513240250.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:50.176Z,1513240250.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:50.569Z,1513240250.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:50.606Z,1513240250.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:50.969Z,1513240250.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:50.984Z,1513240250.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:51.394Z,1513240251.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:51.418Z,1513240251.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:51.761Z,1513240251.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:51.783Z,1513240251.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:52.160Z,1513240252.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:52.176Z,1513240252.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:52.560Z,1513240252.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:52.575Z,1513240252.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:52.958Z,1513240252.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:52.987Z,1513240252.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:53.352Z,1513240253.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:53.367Z,1513240253.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:53.798Z,1513240253.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:53.819Z,1513240253.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:54.173Z,1513240254.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:54.195Z,1513240254.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:54.584Z,1513240254.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:54.618Z,1513240254.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:54.958Z,1513240254.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:54.978Z,1513240254.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:55.364Z,1513240255.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:55.383Z,1513240255.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:55.762Z,1513240255.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:55.782Z,1513240255.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:56.164Z,1513240256.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:56.179Z,1513240256.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:56.591Z,1513240256.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:56.630Z,1513240256.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:56.970Z,1513240256.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:56.999Z,1513240256.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:57.370Z,1513240257.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:57.390Z,1513240257.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:57.751Z,1513240257.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:57.807Z,1513240257.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:58.159Z,1513240258.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:58.174Z,1513240258.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:58.560Z,1513240258.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:58.576Z,1513240258.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:58.961Z,1513240258.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:58.978Z,1513240258.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:59.356Z,1513240259.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:59.372Z,1513240259.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:30:59.774Z,1513240259.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:30:59.804Z,1513240259.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:00.173Z,1513240260.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:00.276Z,1513240260.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:00.574Z,1513240260.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:00.605Z,1513240260.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:00.991Z,1513240260.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:01.067Z,1513240261.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:01.358Z,1513240261.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:01.377Z,1513240261.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:01.763Z,1513240261.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:01.815Z,1513240261.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:02.165Z,1513240262.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:02.180Z,1513240262.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:02.573Z,1513240262.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:02.588Z,1513240262.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:02.972Z,1513240262.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:02.987Z,1513240262.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:03.370Z,1513240263.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:03.391Z,1513240263.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:03.763Z,1513240263.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:03.778Z,1513240263.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:04.145Z,1513240264.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:04.192Z,1513240264.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:04.553Z,1513240264.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:04.591Z,1513240264.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:04.965Z,1513240264.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:04.993Z,1513240264.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:08.352Z,1513240268.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:08.367Z,1513240268.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:08.532Z,1513240268.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:08.580Z,1513240268.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:08.865Z,1513240268.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:08.891Z,1513240268.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:09.278Z,1513240269.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:09.299Z,1513240269.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:09.648Z,1513240269.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:09.667Z,1513240269.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:10.046Z,1513240270.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:10.092Z,1513240270.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:10.447Z,1513240270.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:10.461Z,1513240270.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:10.860Z,1513240270.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:10.888Z,1513240270.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:11.246Z,1513240271.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:11.261Z,1513240271.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:11.665Z,1513240271.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:11.689Z,1513240271.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:12.061Z,1513240272.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:12.087Z,1513240272.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:12.457Z,1513240272.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:12.489Z,1513240272.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:12.884Z,1513240272.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:12.924Z,1513240272.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:13.251Z,1513240273.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:13.267Z,1513240273.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:13.650Z,1513240273.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:13.664Z,1513240273.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:14.055Z,1513240274.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:14.070Z,1513240274.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:14.466Z,1513240274.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:14.487Z,1513240274.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:14.884Z,1513240274.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:14.924Z,1513240274.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:15.266Z,1513240275.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:15.287Z,1513240275.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:15.643Z,1513240275.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:15.669Z,1513240275.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:16.039Z,1513240276.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:16.076Z,1513240276.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:16.443Z,1513240276.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:16.530Z,1513240276.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:16.883Z,1513240276.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:16.931Z,1513240276.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:17.264Z,1513240277.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:17.283Z,1513240277.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:17.659Z,1513240277.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:17.688Z,1513240277.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:18.056Z,1513240278.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:18.111Z,1513240278.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:18.495Z,1513240278.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:18.555Z,1513240278.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:18.855Z,1513240278.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:18.920Z,1513240278.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:19.265Z,1513240279.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:19.317Z,1513240279.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:19.650Z,1513240279.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:19.677Z,1513240279.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:20.069Z,1513240280.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:20.136Z,1513240280.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:20.483Z,1513240280.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:20.565Z,1513240280.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:20.886Z,1513240280.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:20.902Z,1513240280.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:21.256Z,1513240281.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:21.276Z,1513240281.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:21.656Z,1513240281.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:21.708Z,1513240281.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:22.050Z,1513240282.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:22.171Z,1513240282.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:22.535Z,1513240282.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:22.573Z,1513240282.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:22.855Z,1513240282.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:22.875Z,1513240282.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:23.252Z,1513240283.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:23.315Z,1513240283.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:23.693Z,1513240283.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:23.728Z,1513240283.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:24.067Z,1513240284.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:24.123Z,1513240284.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:24.459Z,1513240284.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:24.473Z,1513240284.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:24.851Z,1513240284.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:24.895Z,1513240284.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:25.267Z,1513240285.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:25.285Z,1513240285.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:25.641Z,1513240285.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:25.679Z,1513240285.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:26.065Z,1513240286.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:26.103Z,1513240286.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:26.458Z,1513240286.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:26.483Z,1513240286.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:26.928Z,1513240286.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:26.971Z,1513240286.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:27.295Z,1513240287.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:27.354Z,1513240287.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:27.670Z,1513240287.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:27.692Z,1513240287.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:28.048Z,1513240288.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:28.064Z,1513240288.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:28.454Z,1513240288.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:28.469Z,1513240288.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:28.922Z,1513240288.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:28.985Z,1513240288.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:29.286Z,1513240289.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:29.334Z,1513240289.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:29.656Z,1513240289.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:29.695Z,1513240289.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:30.056Z,1513240290.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:30.151Z,1513240290.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:30.517Z,1513240290.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:30.560Z,1513240290.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:30.843Z,1513240290.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:30.888Z,1513240290.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:31.243Z,1513240291.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:31.284Z,1513240291.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:31.641Z,1513240291.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:31.698Z,1513240291.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:32.052Z,1513240292.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:32.098Z,1513240292.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:32.497Z,1513240292.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:32.598Z,1513240292.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:32.855Z,1513240292.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:32.899Z,1513240292.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:33.256Z,1513240293.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:33.301Z,1513240293.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:33.652Z,1513240293.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:33.671Z,1513240293.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:34.071Z,1513240294.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:34.114Z,1513240294.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:34.460Z,1513240294.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:34.600Z,1513240294.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:34.852Z,1513240294.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:34.928Z,1513240294.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:35.254Z,1513240295.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:35.314Z,1513240295.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:35.654Z,1513240295.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:35.702Z,1513240295.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:36.066Z,1513240296.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:36.087Z,1513240296.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:36.519Z,1513240296.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:36.558Z,1513240296.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:36.841Z,1513240296.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:36.883Z,1513240296.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:37.241Z,1513240297.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:37.280Z,1513240297.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:37.640Z,1513240297.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:37.682Z,1513240297.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:38.060Z,1513240298.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:38.076Z,1513240298.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:38.458Z,1513240298.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:38.490Z,1513240298.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:38.867Z,1513240298.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:38.899Z,1513240298.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:39.256Z,1513240299.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:39.298Z,1513240299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:39.651Z,1513240299.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:39.694Z,1513240299.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:40.048Z,1513240300.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:40.106Z,1513240300.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:40.451Z,1513240300.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:40.510Z,1513240300.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:40.872Z,1513240300.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:40.938Z,1513240300.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:41.249Z,1513240301.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:41.294Z,1513240301.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:41.659Z,1513240301.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:41.697Z,1513240301.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:42.073Z,1513240302.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:42.100Z,1513240302.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:42.459Z,1513240302.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:42.514Z,1513240302.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:42.879Z,1513240302.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:42.956Z,1513240302.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:43.252Z,1513240303.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:43.317Z,1513240303.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:43.642Z,1513240303.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:43.683Z,1513240303.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:44.040Z,1513240304.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:44.088Z,1513240304.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:44.473Z,1513240304.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:44.546Z,1513240304.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:44.857Z,1513240304.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:44.943Z,1513240304.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:45.261Z,1513240305.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:45.290Z,1513240305.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:45.664Z,1513240305.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:45.744Z,1513240305.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.045Z,1513240306.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:46.059Z,1513240306.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.464Z,1513240306.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:46.564Z,1513240306.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.565Z,1513240306.565 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.565Z,1513240306.565 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 160
2017-12-14T08:31:46.565Z,1513240306.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:31:46.567Z,1513240306.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.567Z,1513240306.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2017-12-14T08:31:46.567Z,1513240306.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:31:46.611Z,1513240306.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:31:46.611Z,1513240306.611 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:31:46.848Z,1513240306.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:46.864Z,1513240306.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:46.864Z,1513240306.864 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160
2017-12-14T08:31:46.864Z,1513240306.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:31:46.876Z,1513240306.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:31:46.897Z,1513240306.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:31:46.897Z,1513240306.897 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 160
2017-12-14T08:31:46.897Z,1513240306.897 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:31:46.897Z,1513240306.897 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2017-12-14T08:31:47.256Z,1513240307.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:47.270Z,1513240307.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:31:47.270Z,1513240307.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:31:47.271Z,1513240307.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:31:47.271Z,1513240307.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:31:47.272Z,1513240307.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:31:47.272Z,1513240307.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:31:47.304Z,1513240307.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:31:47.305Z,1513240307.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160
2017-12-14T08:31:47.657Z,1513240307.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:47.671Z,1513240307.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:31:47.671Z,1513240307.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:31:47.671Z,1513240307.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:31:48.058Z,1513240308.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:48.072Z,1513240308.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:48.504Z,1513240308.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:48.556Z,1513240308.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:48.833Z,1513240308.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:48.868Z,1513240308.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:49.251Z,1513240309.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:49.268Z,1513240309.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:49.639Z,1513240309.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:49.671Z,1513240309.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:50.039Z,1513240310.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:50.064Z,1513240310.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:50.506Z,1513240310.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:50.537Z,1513240310.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:50.861Z,1513240310.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:50.893Z,1513240310.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:51.254Z,1513240311.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:51.268Z,1513240311.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:51.646Z,1513240311.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:51.662Z,1513240311.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:52.047Z,1513240312.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:52.061Z,1513240312.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:52.449Z,1513240312.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:52.463Z,1513240312.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:52.842Z,1513240312.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:52.887Z,1513240312.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:53.255Z,1513240313.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:53.296Z,1513240313.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:53.649Z,1513240313.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:53.664Z,1513240313.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:54.057Z,1513240314.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:54.092Z,1513240314.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:54.461Z,1513240314.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:54.476Z,1513240314.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:54.869Z,1513240314.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:54.912Z,1513240314.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:55.250Z,1513240315.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:55.265Z,1513240315.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:55.647Z,1513240315.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:55.716Z,1513240315.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:56.076Z,1513240316.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:56.140Z,1513240316.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:56.454Z,1513240316.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:56.469Z,1513240316.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:56.891Z,1513240316.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:56.915Z,1513240316.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:57.254Z,1513240317.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:57.268Z,1513240317.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:57.644Z,1513240317.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:57.664Z,1513240317.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:58.051Z,1513240318.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:58.072Z,1513240318.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:58.457Z,1513240318.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:58.519Z,1513240318.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:58.852Z,1513240318.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:58.867Z,1513240318.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:59.288Z,1513240319.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:59.327Z,1513240319.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:31:59.666Z,1513240319.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:31:59.701Z,1513240319.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:00.059Z,1513240320.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:00.075Z,1513240320.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:00.513Z,1513240320.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:00.556Z,1513240320.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:00.849Z,1513240320.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:00.863Z,1513240320.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:01.253Z,1513240321.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:01.268Z,1513240321.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:01.681Z,1513240321.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:01.695Z,1513240321.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:02.039Z,1513240322.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:02.072Z,1513240322.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:02.514Z,1513240322.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:02.570Z,1513240322.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:02.854Z,1513240322.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:02.875Z,1513240322.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:03.258Z,1513240323.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:03.273Z,1513240323.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:03.646Z,1513240323.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:03.669Z,1513240323.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:04.052Z,1513240324.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:04.068Z,1513240324.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:04.468Z,1513240324.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:04.551Z,1513240324.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:04.853Z,1513240324.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:04.868Z,1513240324.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:05.247Z,1513240325.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:05.267Z,1513240325.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:09.053Z,1513240329.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:09.162Z,1513240329.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:09.270Z,1513240329.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:09.302Z,1513240329.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:09.629Z,1513240329.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:09.679Z,1513240329.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:10.018Z,1513240330.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:10.033Z,1513240330.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:10.408Z,1513240330.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:10.459Z,1513240330.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:10.874Z,1513240330.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:10.909Z,1513240330.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:11.217Z,1513240331.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:11.239Z,1513240331.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:11.622Z,1513240331.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:11.637Z,1513240331.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:12.021Z,1513240332.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:12.036Z,1513240332.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:12.422Z,1513240332.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:12.439Z,1513240332.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:12.807Z,1513240332.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:12.845Z,1513240332.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:13.227Z,1513240333.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:13.243Z,1513240333.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:13.608Z,1513240333.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:13.638Z,1513240333.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:14.006Z,1513240334.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:14.038Z,1513240334.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:14.434Z,1513240334.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:14.530Z,1513240334.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:14.822Z,1513240334.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:14.849Z,1513240334.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:15.218Z,1513240335.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:15.283Z,1513240335.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:15.615Z,1513240335.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:15.635Z,1513240335.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:16.017Z,1513240336.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:16.031Z,1513240336.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:16.418Z,1513240336.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:16.433Z,1513240336.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:16.825Z,1513240336.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:16.851Z,1513240336.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:17.231Z,1513240337.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:17.251Z,1513240337.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:17.604Z,1513240337.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:17.638Z,1513240337.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:18.040Z,1513240338.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:18.079Z,1513240338.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:18.404Z,1513240338.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:18.576Z,1513240338.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:18.834Z,1513240338.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:18.855Z,1513240338.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:19.234Z,1513240339.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:19.255Z,1513240339.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:19.628Z,1513240339.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:19.654Z,1513240339.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:20.011Z,1513240340.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:20.036Z,1513240340.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:20.407Z,1513240340.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:20.432Z,1513240340.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:20.808Z,1513240340.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:20.843Z,1513240340.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:21.211Z,1513240341.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:21.238Z,1513240341.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:21.627Z,1513240341.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:21.642Z,1513240341.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:22.032Z,1513240342.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:22.051Z,1513240342.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:22.414Z,1513240342.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:22.449Z,1513240342.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:22.868Z,1513240342.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:22.895Z,1513240342.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:23.214Z,1513240343.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:23.249Z,1513240343.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:23.615Z,1513240343.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:23.656Z,1513240343.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:24.055Z,1513240344.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:24.111Z,1513240344.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:24.408Z,1513240344.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:24.423Z,1513240344.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:24.840Z,1513240344.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:24.923Z,1513240344.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:25.240Z,1513240345.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:25.264Z,1513240345.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:25.635Z,1513240345.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:25.655Z,1513240345.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:26.012Z,1513240346.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:26.039Z,1513240346.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:26.407Z,1513240346.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:26.439Z,1513240346.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:26.808Z,1513240346.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:26.843Z,1513240346.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:27.228Z,1513240347.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:27.277Z,1513240347.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:27.621Z,1513240347.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:27.648Z,1513240347.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:28.029Z,1513240348.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:28.059Z,1513240348.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:28.434Z,1513240348.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:28.527Z,1513240348.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:28.816Z,1513240348.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:28.832Z,1513240348.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:29.212Z,1513240349.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:29.239Z,1513240349.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:29.617Z,1513240349.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:29.639Z,1513240349.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:30.017Z,1513240350.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:30.031Z,1513240350.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:30.426Z,1513240350.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:30.520Z,1513240350.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:30.815Z,1513240350.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:30.883Z,1513240350.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:31.244Z,1513240351.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:31.285Z,1513240351.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:31.626Z,1513240351.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:31.696Z,1513240351.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:32.010Z,1513240352.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:32.025Z,1513240352.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:32.411Z,1513240352.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:32.530Z,1513240352.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:32.813Z,1513240352.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:32.840Z,1513240352.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:33.217Z,1513240353.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:33.232Z,1513240353.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:33.630Z,1513240353.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:33.660Z,1513240353.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:34.025Z,1513240354.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:34.053Z,1513240354.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:34.433Z,1513240354.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:34.477Z,1513240354.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:34.837Z,1513240354.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:34.851Z,1513240354.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:35.220Z,1513240355.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:35.246Z,1513240355.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:35.649Z,1513240355.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:35.675Z,1513240355.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:36.010Z,1513240356.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:36.024Z,1513240356.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:36.409Z,1513240356.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:36.441Z,1513240356.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:36.884Z,1513240356.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:36.915Z,1513240356.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:37.226Z,1513240357.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:37.241Z,1513240357.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:37.628Z,1513240357.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:37.643Z,1513240357.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:38.013Z,1513240358.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:38.043Z,1513240358.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:38.413Z,1513240358.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:38.436Z,1513240358.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:38.870Z,1513240358.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:38.917Z,1513240358.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:39.211Z,1513240359.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:39.231Z,1513240359.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:39.625Z,1513240359.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:39.660Z,1513240359.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:40.029Z,1513240360.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:40.059Z,1513240360.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:40.431Z,1513240360.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:40.554Z,1513240360.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:40.868Z,1513240360.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:40.883Z,1513240360.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:41.218Z,1513240361.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:41.233Z,1513240361.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:41.614Z,1513240361.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:41.629Z,1513240361.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:42.013Z,1513240362.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:42.047Z,1513240362.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:42.413Z,1513240362.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:42.427Z,1513240362.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:42.824Z,1513240362.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:42.855Z,1513240362.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:43.229Z,1513240363.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:43.244Z,1513240363.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:43.629Z,1513240363.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:43.645Z,1513240363.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:44.035Z,1513240364.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:44.059Z,1513240364.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:44.407Z,1513240364.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:44.443Z,1513240364.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:44.818Z,1513240364.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:44.832Z,1513240364.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:45.214Z,1513240365.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:45.235Z,1513240365.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:45.621Z,1513240365.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:45.636Z,1513240365.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:46.023Z,1513240366.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:46.131Z,1513240366.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:46.422Z,1513240366.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:46.443Z,1513240366.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:46.807Z,1513240366.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:46.843Z,1513240366.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:47.249Z,1513240367.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:47.284Z,1513240367.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:47.616Z,1513240367.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:47.643Z,1513240367.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:48.008Z,1513240368.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:48.039Z,1513240368.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:48.412Z,1513240368.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:48.438Z,1513240368.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:48.839Z,1513240368.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:48.856Z,1513240368.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:49.227Z,1513240369.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:49.250Z,1513240369.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:49.637Z,1513240369.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:49.652Z,1513240369.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:50.011Z,1513240370.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:50.043Z,1513240370.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:50.415Z,1513240370.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:50.459Z,1513240370.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:50.888Z,1513240370.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:50.920Z,1513240370.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:51.215Z,1513240371.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:51.256Z,1513240371.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:51.626Z,1513240371.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:51.655Z,1513240371.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:52.063Z,1513240372.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:52.080Z,1513240372.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:52.426Z,1513240372.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:52.514Z,1513240372.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:52.878Z,1513240372.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:52.943Z,1513240372.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:53.211Z,1513240373.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:53.244Z,1513240373.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:53.646Z,1513240373.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:53.712Z,1513240373.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:54.008Z,1513240374.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:54.049Z,1513240374.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:54.404Z,1513240374.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:54.514Z,1513240374.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:54.822Z,1513240374.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:54.858Z,1513240374.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:55.234Z,1513240375.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:55.249Z,1513240375.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:55.621Z,1513240375.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:55.648Z,1513240375.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:56.012Z,1513240376.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:56.047Z,1513240376.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:56.411Z,1513240376.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:56.496Z,1513240376.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:56.851Z,1513240376.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:56.902Z,1513240376.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:57.296Z,1513240377.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:57.310Z,1513240377.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:57.621Z,1513240377.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:57.655Z,1513240377.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:58.017Z,1513240378.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:58.043Z,1513240378.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:58.422Z,1513240378.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:58.445Z,1513240378.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:58.819Z,1513240378.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:58.834Z,1513240378.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:59.216Z,1513240379.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:59.230Z,1513240379.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:32:59.618Z,1513240379.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:32:59.632Z,1513240379.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:00.060Z,1513240380.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:00.088Z,1513240380.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:00.415Z,1513240380.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:00.429Z,1513240380.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:00.838Z,1513240380.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:00.855Z,1513240380.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:01.233Z,1513240381.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:01.248Z,1513240381.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:01.630Z,1513240381.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:01.645Z,1513240381.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:02.019Z,1513240382.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:02.039Z,1513240382.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:02.407Z,1513240382.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:02.432Z,1513240382.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:02.808Z,1513240382.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:02.879Z,1513240382.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:03.254Z,1513240383.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:03.288Z,1513240383.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:03.626Z,1513240383.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:03.647Z,1513240383.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:04.034Z,1513240384.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:04.050Z,1513240384.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:04.430Z,1513240384.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:04.444Z,1513240384.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:04.871Z,1513240384.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:04.919Z,1513240384.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:05.211Z,1513240385.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:05.249Z,1513240385.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:05.612Z,1513240385.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:05.646Z,1513240385.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:09.160Z,1513240389.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:09.194Z,1513240389.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:09.300Z,1513240389.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:09.340Z,1513240389.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:09.663Z,1513240389.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:09.694Z,1513240389.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:10.066Z,1513240390.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:10.099Z,1513240390.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:10.510Z,1513240390.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:10.559Z,1513240390.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:10.855Z,1513240390.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:10.871Z,1513240390.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:11.251Z,1513240391.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:11.267Z,1513240391.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:11.654Z,1513240391.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:11.669Z,1513240391.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:12.055Z,1513240392.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:12.070Z,1513240392.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:12.473Z,1513240392.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:12.548Z,1513240392.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:12.876Z,1513240392.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:12.916Z,1513240392.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:13.261Z,1513240393.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:13.279Z,1513240393.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:13.661Z,1513240393.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:13.676Z,1513240393.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:14.058Z,1513240394.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:14.073Z,1513240394.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:14.477Z,1513240394.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:14.544Z,1513240394.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:14.882Z,1513240394.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:14.963Z,1513240394.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:15.244Z,1513240395.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:15.279Z,1513240395.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:15.626Z,1513240395.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:33:15.627Z,1513240395.627 [NAL9602] Data Fault, FailCount= 4
2017-12-14T08:33:15.627Z,1513240395.627 [NAL9602](ERROR): Data Fault
2017-12-14T08:33:15.644Z,1513240395.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:15.691Z,1513240395.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:15.721Z,1513240395.721 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:33:16.074Z,1513240396.074 [NAL9602](INFO): Powering down
2017-12-14T08:33:16.095Z,1513240396.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:16.135Z,1513240396.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:16.450Z,1513240396.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:16.495Z,1513240396.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:16.852Z,1513240396.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:16.879Z,1513240396.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:16.909Z,1513240396.909 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:33:16.909Z,1513240396.909 [NAL9602] No Fault, FailCount= 4
2017-12-14T08:33:17.256Z,1513240397.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:17.270Z,1513240397.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:17.656Z,1513240397.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:17.672Z,1513240397.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:18.053Z,1513240398.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:18.068Z,1513240398.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:18.450Z,1513240398.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:18.464Z,1513240398.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:18.882Z,1513240398.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:18.921Z,1513240398.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:19.278Z,1513240399.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:19.296Z,1513240399.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:19.644Z,1513240399.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:19.675Z,1513240399.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:20.047Z,1513240400.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:20.079Z,1513240400.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:20.442Z,1513240400.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:20.485Z,1513240400.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:20.892Z,1513240400.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:20.927Z,1513240400.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:21.243Z,1513240401.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:21.275Z,1513240401.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:21.647Z,1513240401.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:21.681Z,1513240401.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:22.037Z,1513240402.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:22.052Z,1513240402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:22.542Z,1513240402.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:22.594Z,1513240402.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:22.842Z,1513240402.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:22.888Z,1513240402.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:23.246Z,1513240403.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:23.260Z,1513240403.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:23.650Z,1513240403.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:23.681Z,1513240403.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:24.051Z,1513240404.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:24.066Z,1513240404.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:24.465Z,1513240404.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:24.556Z,1513240404.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:24.852Z,1513240404.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:24.870Z,1513240404.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:25.254Z,1513240405.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:25.281Z,1513240405.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:25.642Z,1513240405.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:25.677Z,1513240405.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:26.059Z,1513240406.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:26.079Z,1513240406.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:26.497Z,1513240406.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:26.550Z,1513240406.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:26.845Z,1513240406.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:26.862Z,1513240406.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:27.251Z,1513240407.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:27.267Z,1513240407.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:27.654Z,1513240407.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:27.668Z,1513240407.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:28.050Z,1513240408.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:28.065Z,1513240408.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:28.485Z,1513240408.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:28.539Z,1513240408.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:28.888Z,1513240408.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:28.928Z,1513240408.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:29.242Z,1513240409.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:29.259Z,1513240409.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:29.646Z,1513240409.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:29.682Z,1513240409.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:30.046Z,1513240410.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:30.062Z,1513240410.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:30.438Z,1513240410.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:30.453Z,1513240410.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:30.851Z,1513240410.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:30.883Z,1513240410.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:31.256Z,1513240411.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:31.275Z,1513240411.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:31.650Z,1513240411.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:31.671Z,1513240411.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:32.082Z,1513240412.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:32.117Z,1513240412.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:32.449Z,1513240412.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:32.479Z,1513240412.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:32.875Z,1513240412.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:32.912Z,1513240412.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:33.243Z,1513240413.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:33.274Z,1513240413.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:33.646Z,1513240413.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:33.679Z,1513240413.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:34.046Z,1513240414.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:34.074Z,1513240414.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:34.442Z,1513240414.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:34.477Z,1513240414.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:34.893Z,1513240414.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:34.924Z,1513240414.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:35.280Z,1513240415.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:35.334Z,1513240415.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:35.643Z,1513240415.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:35.674Z,1513240415.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:36.046Z,1513240416.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:36.083Z,1513240416.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:36.484Z,1513240416.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:36.579Z,1513240416.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:36.854Z,1513240416.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:36.914Z,1513240416.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:37.252Z,1513240417.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:37.268Z,1513240417.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:37.650Z,1513240417.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:37.671Z,1513240417.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:38.055Z,1513240418.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:38.114Z,1513240418.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:38.505Z,1513240418.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:38.552Z,1513240418.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:38.842Z,1513240418.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:38.904Z,1513240418.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:39.246Z,1513240419.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:39.274Z,1513240419.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:39.643Z,1513240419.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:39.671Z,1513240419.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:40.040Z,1513240420.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:40.076Z,1513240420.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:40.471Z,1513240420.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:40.539Z,1513240420.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:40.842Z,1513240420.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:40.856Z,1513240420.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:41.248Z,1513240421.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:41.263Z,1513240421.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:41.646Z,1513240421.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:41.661Z,1513240421.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:42.052Z,1513240422.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:42.067Z,1513240422.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:42.465Z,1513240422.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:42.521Z,1513240422.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:42.850Z,1513240422.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:42.865Z,1513240422.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:43.251Z,1513240423.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:43.266Z,1513240423.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:43.651Z,1513240423.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:43.666Z,1513240423.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:44.050Z,1513240424.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:44.065Z,1513240424.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:44.446Z,1513240424.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:44.477Z,1513240424.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:44.883Z,1513240424.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:44.907Z,1513240424.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:45.250Z,1513240425.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:45.271Z,1513240425.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:45.653Z,1513240425.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:45.667Z,1513240425.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:46.050Z,1513240426.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:46.064Z,1513240426.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:46.424Z,1513240426.424 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:33:46.455Z,1513240426.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:46.470Z,1513240426.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:46.865Z,1513240426.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:46.906Z,1513240426.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:47.254Z,1513240427.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:47.308Z,1513240427.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:47.655Z,1513240427.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:47.670Z,1513240427.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:48.060Z,1513240428.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:48.095Z,1513240428.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:48.451Z,1513240428.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:48.467Z,1513240428.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:48.884Z,1513240428.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:48.919Z,1513240428.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:49.250Z,1513240429.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:49.264Z,1513240429.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:49.650Z,1513240429.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:49.665Z,1513240429.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:50.040Z,1513240430.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:50.067Z,1513240430.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:50.464Z,1513240430.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:50.528Z,1513240430.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:50.841Z,1513240430.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:50.855Z,1513240430.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:51.282Z,1513240431.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:51.318Z,1513240431.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:51.648Z,1513240431.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:51.675Z,1513240431.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:52.051Z,1513240432.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:52.066Z,1513240432.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:52.506Z,1513240432.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:52.538Z,1513240432.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:52.851Z,1513240432.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:52.866Z,1513240432.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:53.256Z,1513240433.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:53.271Z,1513240433.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:53.653Z,1513240433.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:53.668Z,1513240433.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:54.046Z,1513240434.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:54.079Z,1513240434.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:54.537Z,1513240434.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:54.597Z,1513240434.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:54.849Z,1513240434.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:54.877Z,1513240434.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:55.257Z,1513240435.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:55.272Z,1513240435.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:55.660Z,1513240435.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:55.675Z,1513240435.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:56.057Z,1513240436.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:56.072Z,1513240436.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:56.465Z,1513240436.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:56.538Z,1513240436.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:56.857Z,1513240436.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:56.891Z,1513240436.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:57.234Z,1513240437.234 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:33:57.251Z,1513240437.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:57.297Z,1513240437.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:57.651Z,1513240437.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:57.670Z,1513240437.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:58.057Z,1513240438.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:58.095Z,1513240438.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:58.466Z,1513240438.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:58.562Z,1513240438.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:58.871Z,1513240438.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:58.904Z,1513240438.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:59.253Z,1513240439.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:59.300Z,1513240439.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:33:59.647Z,1513240439.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:33:59.679Z,1513240439.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:00.048Z,1513240440.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:00.080Z,1513240440.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:00.459Z,1513240440.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:00.473Z,1513240440.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:00.921Z,1513240440.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:00.963Z,1513240440.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:01.279Z,1513240441.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:01.299Z,1513240441.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:01.667Z,1513240441.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:01.683Z,1513240441.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:02.040Z,1513240442.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:02.076Z,1513240442.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:02.443Z,1513240442.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:02.451Z,1513240442.451 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:34:02.451Z,1513240442.451 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:34:02.451Z,1513240442.451 [BPC1](ERROR): Communications Fault
2017-12-14T08:34:02.491Z,1513240442.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:02.522Z,1513240442.522 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:34:02.893Z,1513240442.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:02.928Z,1513240442.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:03.240Z,1513240443.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:03.256Z,1513240443.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:03.658Z,1513240443.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:03.692Z,1513240443.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:03.706Z,1513240443.706 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:34:03.706Z,1513240443.706 [BPC1] No Fault, FailCount= 1
2017-12-14T08:34:04.057Z,1513240444.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:04.187Z,1513240444.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:04.495Z,1513240444.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:04.547Z,1513240444.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:04.559Z,1513240444.559 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:34:04.559Z,1513240444.559 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:34:04.559Z,1513240444.559 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:34:04.559Z,1513240444.559 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:34:04.849Z,1513240444.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:04.866Z,1513240444.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:04.883Z,1513240444.883 [Default:CheckIn:D] Stopped
2017-12-14T08:34:04.883Z,1513240444.883 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:34:05.255Z,1513240445.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:05.270Z,1513240445.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:05.300Z,1513240445.300 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 480.824870 min 
2017-12-14T08:34:05.300Z,1513240445.300 [Default:CheckIn:E] Stopped
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn] Stopped
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn](INFO): Running loop #47
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn] Running Loop=47
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:34:05.301Z,1513240445.301 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:34:05.654Z,1513240445.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:05.668Z,1513240445.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:09.185Z,1513240449.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:09.200Z,1513240449.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:09.306Z,1513240449.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:09.347Z,1513240449.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:09.669Z,1513240449.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:09.699Z,1513240449.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:10.056Z,1513240450.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:10.071Z,1513240450.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:10.496Z,1513240450.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:10.567Z,1513240450.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:10.847Z,1513240450.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:10.881Z,1513240450.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:11.256Z,1513240451.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:11.294Z,1513240451.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:11.648Z,1513240451.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:11.691Z,1513240451.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:12.066Z,1513240452.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:12.091Z,1513240452.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:12.465Z,1513240452.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:12.563Z,1513240452.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:12.866Z,1513240452.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:12.903Z,1513240452.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:13.253Z,1513240453.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:13.268Z,1513240453.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:13.652Z,1513240453.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:13.667Z,1513240453.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:14.056Z,1513240454.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:14.075Z,1513240454.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:14.455Z,1513240454.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:14.469Z,1513240454.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:14.891Z,1513240454.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:14.930Z,1513240454.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:15.276Z,1513240455.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:15.291Z,1513240455.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:15.658Z,1513240455.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:15.684Z,1513240455.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:16.051Z,1513240456.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:16.086Z,1513240456.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:16.441Z,1513240456.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:16.456Z,1513240456.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:16.906Z,1513240456.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:16.971Z,1513240456.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:17.268Z,1513240457.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:17.282Z,1513240457.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:17.662Z,1513240457.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:17.676Z,1513240457.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:18.065Z,1513240458.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:18.079Z,1513240458.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:18.501Z,1513240458.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:18.559Z,1513240458.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:18.856Z,1513240458.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:18.871Z,1513240458.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:19.256Z,1513240459.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:19.271Z,1513240459.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:19.669Z,1513240459.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:19.700Z,1513240459.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:20.094Z,1513240460.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:20.130Z,1513240460.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:20.491Z,1513240460.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:20.525Z,1513240460.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:20.847Z,1513240460.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:20.886Z,1513240460.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:21.252Z,1513240461.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:21.288Z,1513240461.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:21.654Z,1513240461.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:21.669Z,1513240461.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:22.065Z,1513240462.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:22.103Z,1513240462.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:22.518Z,1513240462.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:22.555Z,1513240462.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:22.870Z,1513240462.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:22.927Z,1513240462.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:23.256Z,1513240463.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:23.316Z,1513240463.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:23.656Z,1513240463.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:23.675Z,1513240463.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:24.056Z,1513240464.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:24.071Z,1513240464.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:24.508Z,1513240464.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:24.551Z,1513240464.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:24.873Z,1513240464.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:24.939Z,1513240464.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:25.278Z,1513240465.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:25.294Z,1513240465.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:25.672Z,1513240465.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:25.735Z,1513240465.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:26.049Z,1513240466.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:26.064Z,1513240466.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:26.582Z,1513240466.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:26.635Z,1513240466.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:26.856Z,1513240466.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:26.899Z,1513240466.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:27.252Z,1513240467.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:27.287Z,1513240467.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:27.662Z,1513240467.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:27.695Z,1513240467.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:28.069Z,1513240468.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:28.103Z,1513240468.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:28.465Z,1513240468.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:28.491Z,1513240468.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:28.900Z,1513240468.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:28.939Z,1513240468.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:29.253Z,1513240469.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:29.268Z,1513240469.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:29.665Z,1513240469.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:29.692Z,1513240469.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:30.062Z,1513240470.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:30.076Z,1513240470.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:30.466Z,1513240470.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:30.496Z,1513240470.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:30.877Z,1513240470.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:30.926Z,1513240470.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:31.258Z,1513240471.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:31.272Z,1513240471.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:31.665Z,1513240471.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:31.680Z,1513240471.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:32.065Z,1513240472.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:32.080Z,1513240472.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:32.487Z,1513240472.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:32.538Z,1513240472.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:32.873Z,1513240472.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:32.916Z,1513240472.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:33.258Z,1513240473.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:33.280Z,1513240473.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:33.656Z,1513240473.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:33.670Z,1513240473.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:34.062Z,1513240474.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:34.115Z,1513240474.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:34.514Z,1513240474.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:34.553Z,1513240474.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:34.862Z,1513240474.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:34.879Z,1513240474.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:35.257Z,1513240475.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:35.272Z,1513240475.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:35.652Z,1513240475.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:35.680Z,1513240475.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:36.088Z,1513240476.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:36.130Z,1513240476.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:36.476Z,1513240476.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:36.532Z,1513240476.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:36.876Z,1513240476.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:36.892Z,1513240476.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:37.270Z,1513240477.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:37.285Z,1513240477.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:37.670Z,1513240477.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:37.690Z,1513240477.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:38.049Z,1513240478.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:38.083Z,1513240478.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:38.477Z,1513240478.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:38.538Z,1513240478.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:38.848Z,1513240478.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:38.863Z,1513240478.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:39.279Z,1513240479.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:39.303Z,1513240479.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:39.660Z,1513240479.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:39.695Z,1513240479.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:40.054Z,1513240480.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:40.072Z,1513240480.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:40.470Z,1513240480.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:40.571Z,1513240480.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:40.874Z,1513240480.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:40.905Z,1513240480.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:41.252Z,1513240481.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:41.281Z,1513240481.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:41.658Z,1513240481.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:41.674Z,1513240481.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:42.059Z,1513240482.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:42.075Z,1513240482.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:42.474Z,1513240482.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:42.510Z,1513240482.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:42.880Z,1513240482.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:42.928Z,1513240482.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:43.275Z,1513240483.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:43.295Z,1513240483.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:43.670Z,1513240483.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:43.686Z,1513240483.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:44.052Z,1513240484.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:44.083Z,1513240484.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:44.456Z,1513240484.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:44.483Z,1513240484.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:44.879Z,1513240484.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:44.943Z,1513240484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:45.251Z,1513240485.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:45.287Z,1513240485.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:45.708Z,1513240485.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:45.759Z,1513240485.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:46.076Z,1513240486.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:46.141Z,1513240486.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:46.507Z,1513240486.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:46.532Z,1513240486.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:46.860Z,1513240486.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:46.875Z,1513240486.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:47.255Z,1513240487.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:47.307Z,1513240487.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:47.308Z,1513240487.308 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:47.308Z,1513240487.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 161
2017-12-14T08:34:47.309Z,1513240487.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:34:47.311Z,1513240487.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:47.311Z,1513240487.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2017-12-14T08:34:47.311Z,1513240487.311 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:34:47.324Z,1513240487.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:34:47.325Z,1513240487.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:34:47.675Z,1513240487.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:47.699Z,1513240487.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:47.700Z,1513240487.700 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161
2017-12-14T08:34:47.700Z,1513240487.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:34:47.712Z,1513240487.712 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:34:47.712Z,1513240487.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:34:47.712Z,1513240487.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 161
2017-12-14T08:34:47.713Z,1513240487.713 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:34:47.713Z,1513240487.713 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2017-12-14T08:34:48.061Z,1513240488.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:48.110Z,1513240488.110 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:34:48.111Z,1513240488.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:34:48.111Z,1513240488.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:34:48.112Z,1513240488.112 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:34:48.112Z,1513240488.112 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:34:48.112Z,1513240488.112 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:34:48.123Z,1513240488.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:34:48.123Z,1513240488.123 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161
2017-12-14T08:34:48.488Z,1513240488.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:48.532Z,1513240488.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:34:48.541Z,1513240488.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:34:48.542Z,1513240488.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:34:48.855Z,1513240488.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:48.892Z,1513240488.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:49.254Z,1513240489.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:49.284Z,1513240489.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:49.656Z,1513240489.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:49.679Z,1513240489.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:50.070Z,1513240490.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:50.102Z,1513240490.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:50.511Z,1513240490.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:50.541Z,1513240490.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:50.858Z,1513240490.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:50.873Z,1513240490.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:51.254Z,1513240491.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:51.273Z,1513240491.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:51.655Z,1513240491.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:51.675Z,1513240491.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:52.065Z,1513240492.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:52.108Z,1513240492.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:52.512Z,1513240492.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:52.547Z,1513240492.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:52.869Z,1513240492.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:52.908Z,1513240492.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:53.266Z,1513240493.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:53.280Z,1513240493.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:53.662Z,1513240493.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:53.677Z,1513240493.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:54.060Z,1513240494.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:54.075Z,1513240494.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:54.447Z,1513240494.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:54.474Z,1513240494.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:54.847Z,1513240494.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:54.883Z,1513240494.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:55.247Z,1513240495.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:55.343Z,1513240495.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:55.647Z,1513240495.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:55.673Z,1513240495.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:56.074Z,1513240496.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:56.089Z,1513240496.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:56.475Z,1513240496.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:56.523Z,1513240496.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:56.892Z,1513240496.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:56.930Z,1513240496.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:57.247Z,1513240497.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:57.272Z,1513240497.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:57.647Z,1513240497.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:57.672Z,1513240497.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:58.052Z,1513240498.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:58.078Z,1513240498.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:58.486Z,1513240498.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:58.525Z,1513240498.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:58.879Z,1513240498.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:58.918Z,1513240498.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:59.273Z,1513240499.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:59.288Z,1513240499.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:34:59.676Z,1513240499.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:34:59.691Z,1513240499.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:00.048Z,1513240500.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:00.075Z,1513240500.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:00.464Z,1513240500.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:00.528Z,1513240500.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:00.855Z,1513240500.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:00.891Z,1513240500.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:01.255Z,1513240501.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:01.269Z,1513240501.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:01.668Z,1513240501.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:01.705Z,1513240501.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:02.069Z,1513240502.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:02.100Z,1513240502.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:02.527Z,1513240502.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:02.557Z,1513240502.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:02.854Z,1513240502.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:02.869Z,1513240502.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:03.256Z,1513240503.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:03.276Z,1513240503.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:03.669Z,1513240503.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:03.710Z,1513240503.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:04.078Z,1513240504.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:04.101Z,1513240504.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:04.514Z,1513240504.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:04.549Z,1513240504.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:04.898Z,1513240504.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:04.942Z,1513240504.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:05.256Z,1513240505.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:05.280Z,1513240505.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:05.670Z,1513240505.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:05.705Z,1513240505.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:06.066Z,1513240506.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:06.081Z,1513240506.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:09.566Z,1513240509.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:09.626Z,1513240509.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:09.740Z,1513240509.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:09.783Z,1513240509.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:10.077Z,1513240510.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:10.092Z,1513240510.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:10.479Z,1513240510.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:10.515Z,1513240510.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:10.887Z,1513240510.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:10.932Z,1513240510.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:11.315Z,1513240511.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:11.358Z,1513240511.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:11.690Z,1513240511.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:11.698Z,1513240511.698 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:35:11.698Z,1513240511.698 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:35:11.698Z,1513240511.698 [BPC1](ERROR): Communications Fault
2017-12-14T08:35:11.706Z,1513240511.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:11.741Z,1513240511.741 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:35:12.101Z,1513240512.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:12.131Z,1513240512.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:12.497Z,1513240512.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:12.532Z,1513240512.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:12.895Z,1513240512.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:12.939Z,1513240512.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:12.952Z,1513240512.952 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:35:12.952Z,1513240512.952 [BPC1] No Fault, FailCount= 1
2017-12-14T08:35:13.278Z,1513240513.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:13.359Z,1513240513.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:13.697Z,1513240513.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:13.712Z,1513240513.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:14.101Z,1513240514.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:14.132Z,1513240514.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:14.544Z,1513240514.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:14.596Z,1513240514.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:14.892Z,1513240514.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:14.908Z,1513240514.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:15.282Z,1513240515.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:15.301Z,1513240515.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:15.692Z,1513240515.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:15.706Z,1513240515.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:16.088Z,1513240516.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:16.102Z,1513240516.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:16.539Z,1513240516.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:16.563Z,1513240516.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:16.905Z,1513240516.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:16.936Z,1513240516.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:17.298Z,1513240517.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:17.312Z,1513240517.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:17.697Z,1513240517.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:17.712Z,1513240517.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:18.095Z,1513240518.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:18.115Z,1513240518.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:18.547Z,1513240518.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:18.571Z,1513240518.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:18.892Z,1513240518.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:18.915Z,1513240518.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:19.285Z,1513240519.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:19.311Z,1513240519.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:19.700Z,1513240519.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:19.715Z,1513240519.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:20.099Z,1513240520.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:20.122Z,1513240520.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:20.538Z,1513240520.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:20.582Z,1513240520.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:20.900Z,1513240520.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:20.931Z,1513240520.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:21.284Z,1513240521.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:21.306Z,1513240521.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:21.679Z,1513240521.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:21.742Z,1513240521.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:22.086Z,1513240522.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:22.108Z,1513240522.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:22.473Z,1513240522.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:22.488Z,1513240522.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:22.896Z,1513240522.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:22.920Z,1513240522.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:23.300Z,1513240523.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:23.315Z,1513240523.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:23.699Z,1513240523.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:23.719Z,1513240523.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:24.102Z,1513240524.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:24.138Z,1513240524.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:24.475Z,1513240524.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:24.511Z,1513240524.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:24.886Z,1513240524.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:24.925Z,1513240524.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:25.275Z,1513240525.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:25.303Z,1513240525.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:25.704Z,1513240525.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:25.719Z,1513240525.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:26.086Z,1513240526.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:26.127Z,1513240526.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:26.489Z,1513240526.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:26.523Z,1513240526.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:26.949Z,1513240526.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:26.964Z,1513240526.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:27.282Z,1513240527.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:27.329Z,1513240527.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:27.685Z,1513240527.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:27.712Z,1513240527.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:28.089Z,1513240528.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:28.126Z,1513240528.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:28.532Z,1513240528.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:28.574Z,1513240528.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:28.883Z,1513240528.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:28.899Z,1513240528.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:29.280Z,1513240529.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:29.295Z,1513240529.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:29.687Z,1513240529.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:29.723Z,1513240529.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:30.084Z,1513240530.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:30.100Z,1513240530.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:30.558Z,1513240530.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:30.586Z,1513240530.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:30.904Z,1513240530.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:30.943Z,1513240530.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:31.297Z,1513240531.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:31.313Z,1513240531.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:31.699Z,1513240531.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:31.715Z,1513240531.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:32.083Z,1513240532.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:32.116Z,1513240532.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:32.533Z,1513240532.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:32.595Z,1513240532.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:32.884Z,1513240532.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:32.904Z,1513240532.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:33.284Z,1513240533.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:33.299Z,1513240533.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:33.697Z,1513240533.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:33.771Z,1513240533.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:34.097Z,1513240534.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:34.120Z,1513240534.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:34.542Z,1513240534.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:34.596Z,1513240534.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:34.887Z,1513240534.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:34.910Z,1513240534.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:35.287Z,1513240535.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:35.302Z,1513240535.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:35.683Z,1513240535.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:35.698Z,1513240535.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:36.082Z,1513240536.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:36.104Z,1513240536.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:36.487Z,1513240536.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:36.592Z,1513240536.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:36.911Z,1513240536.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:36.955Z,1513240536.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:37.293Z,1513240537.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:37.316Z,1513240537.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:37.694Z,1513240537.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:37.717Z,1513240537.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:38.076Z,1513240538.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:38.103Z,1513240538.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:38.485Z,1513240538.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:38.500Z,1513240538.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:38.889Z,1513240538.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:38.924Z,1513240538.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:39.286Z,1513240539.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:39.301Z,1513240539.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:39.698Z,1513240539.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:39.712Z,1513240539.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:40.131Z,1513240540.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:40.179Z,1513240540.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:40.488Z,1513240540.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:40.512Z,1513240540.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:40.893Z,1513240540.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:40.929Z,1513240540.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:41.289Z,1513240541.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:41.304Z,1513240541.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:41.698Z,1513240541.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:41.719Z,1513240541.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:42.099Z,1513240542.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:42.119Z,1513240542.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:42.550Z,1513240542.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:42.597Z,1513240542.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:42.871Z,1513240542.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:42.934Z,1513240542.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:43.298Z,1513240543.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:43.335Z,1513240543.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:43.675Z,1513240543.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:43.701Z,1513240543.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:44.080Z,1513240544.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:44.107Z,1513240544.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:44.534Z,1513240544.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:44.562Z,1513240544.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:44.902Z,1513240544.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:44.925Z,1513240544.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:45.303Z,1513240545.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:45.318Z,1513240545.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:45.697Z,1513240545.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:45.712Z,1513240545.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:46.079Z,1513240546.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:46.105Z,1513240546.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:46.536Z,1513240546.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:46.614Z,1513240546.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:46.892Z,1513240546.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:46.928Z,1513240546.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:47.282Z,1513240547.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:47.296Z,1513240547.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:47.693Z,1513240547.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:47.724Z,1513240547.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:48.093Z,1513240548.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:48.124Z,1513240548.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:48.539Z,1513240548.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:48.585Z,1513240548.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:48.875Z,1513240548.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:48.899Z,1513240548.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:49.284Z,1513240549.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:49.300Z,1513240549.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:49.683Z,1513240549.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:49.698Z,1513240549.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:50.077Z,1513240550.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:50.108Z,1513240550.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:50.475Z,1513240550.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:50.563Z,1513240550.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:50.910Z,1513240550.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:50.932Z,1513240550.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:51.292Z,1513240551.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:51.307Z,1513240551.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:51.691Z,1513240551.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:51.711Z,1513240551.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:52.087Z,1513240552.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:52.102Z,1513240552.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:52.483Z,1513240552.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:52.498Z,1513240552.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:52.916Z,1513240552.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:52.924Z,1513240552.924 [BPC1](ERROR): Failed to parse message.
2017-12-14T08:35:52.924Z,1513240552.924 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T08:35:52.924Z,1513240552.924 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:35:52.924Z,1513240552.924 [BPC1](ERROR): Data Fault
2017-12-14T08:35:52.969Z,1513240552.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:52.999Z,1513240552.999 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:35:53.291Z,1513240553.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:53.306Z,1513240553.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:53.686Z,1513240553.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:53.700Z,1513240553.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:54.089Z,1513240554.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:54.105Z,1513240554.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:54.135Z,1513240554.135 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:35:54.135Z,1513240554.135 [BPC1] No Fault, FailCount= 1
2017-12-14T08:35:54.493Z,1513240554.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:54.563Z,1513240554.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:54.886Z,1513240554.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:54.900Z,1513240554.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:55.288Z,1513240555.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:55.303Z,1513240555.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:55.691Z,1513240555.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:55.706Z,1513240555.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:56.090Z,1513240556.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:56.159Z,1513240556.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:56.538Z,1513240556.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:56.573Z,1513240556.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:56.889Z,1513240556.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:56.903Z,1513240556.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:57.277Z,1513240557.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:57.304Z,1513240557.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:57.689Z,1513240557.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:57.704Z,1513240557.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:58.088Z,1513240558.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:58.102Z,1513240558.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:58.525Z,1513240558.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:58.560Z,1513240558.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:58.909Z,1513240558.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:58.924Z,1513240558.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:59.296Z,1513240559.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:59.356Z,1513240559.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:35:59.686Z,1513240559.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:35:59.709Z,1513240559.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:00.082Z,1513240560.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:00.097Z,1513240560.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:00.538Z,1513240560.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:00.577Z,1513240560.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:00.886Z,1513240560.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:00.900Z,1513240560.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:01.288Z,1513240561.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:01.304Z,1513240561.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:01.693Z,1513240561.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:01.707Z,1513240561.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:02.090Z,1513240562.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:02.119Z,1513240562.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:02.558Z,1513240562.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:02.619Z,1513240562.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:02.875Z,1513240562.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:02.912Z,1513240562.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:03.279Z,1513240563.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:03.316Z,1513240563.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:03.675Z,1513240563.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:03.714Z,1513240563.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:04.075Z,1513240564.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:04.111Z,1513240564.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:04.479Z,1513240564.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:04.648Z,1513240564.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:04.898Z,1513240564.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:04.919Z,1513240564.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:05.298Z,1513240565.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:05.313Z,1513240565.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:05.698Z,1513240565.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:05.714Z,1513240565.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:06.088Z,1513240566.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:06.107Z,1513240566.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:09.574Z,1513240569.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:09.598Z,1513240569.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:09.707Z,1513240569.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:09.747Z,1513240569.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:10.071Z,1513240570.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:10.101Z,1513240570.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:10.515Z,1513240570.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:10.555Z,1513240570.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:10.866Z,1513240570.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:10.881Z,1513240570.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:11.260Z,1513240571.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:11.275Z,1513240571.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:11.656Z,1513240571.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:11.675Z,1513240571.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:12.061Z,1513240572.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:12.118Z,1513240572.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:12.498Z,1513240572.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:12.540Z,1513240572.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:12.880Z,1513240572.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:12.896Z,1513240572.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:13.266Z,1513240573.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:13.326Z,1513240573.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:13.671Z,1513240573.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:13.711Z,1513240573.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:14.049Z,1513240574.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:14.063Z,1513240574.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:14.486Z,1513240574.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:14.546Z,1513240574.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:14.858Z,1513240574.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:14.903Z,1513240574.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:15.304Z,1513240575.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:15.351Z,1513240575.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:15.661Z,1513240575.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:15.707Z,1513240575.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:16.070Z,1513240576.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:16.099Z,1513240576.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:16.488Z,1513240576.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:16.533Z,1513240576.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:16.853Z,1513240576.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:16.869Z,1513240576.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:17.253Z,1513240577.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:17.268Z,1513240577.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:17.653Z,1513240577.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:17.667Z,1513240577.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:18.062Z,1513240578.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:18.099Z,1513240578.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:18.508Z,1513240578.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:18.611Z,1513240578.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:18.867Z,1513240578.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:18.886Z,1513240578.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:19.260Z,1513240579.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:19.276Z,1513240579.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:19.663Z,1513240579.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:19.690Z,1513240579.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:20.084Z,1513240580.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:20.136Z,1513240580.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:20.443Z,1513240580.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:20.474Z,1513240580.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:20.894Z,1513240580.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:20.927Z,1513240580.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:21.264Z,1513240581.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:21.304Z,1513240581.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:21.660Z,1513240581.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:21.698Z,1513240581.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:22.054Z,1513240582.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:22.054Z,1513240582.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:22.099Z,1513240582.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:22.459Z,1513240582.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:22.510Z,1513240582.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:22.849Z,1513240582.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:22.903Z,1513240582.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:22.947Z,1513240582.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:23.253Z,1513240583.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:23.281Z,1513240583.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:23.307Z,1513240583.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:23.701Z,1513240583.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:23.803Z,1513240583.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:24.073Z,1513240584.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:24.110Z,1513240584.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:24.551Z,1513240584.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:24.586Z,1513240584.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:24.849Z,1513240584.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:24.899Z,1513240584.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:25.258Z,1513240585.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:25.282Z,1513240585.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:25.656Z,1513240585.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:25.703Z,1513240585.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:26.063Z,1513240586.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:26.080Z,1513240586.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:26.486Z,1513240586.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:26.557Z,1513240586.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:26.866Z,1513240586.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:26.939Z,1513240586.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:27.267Z,1513240587.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:27.295Z,1513240587.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:27.685Z,1513240587.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:27.700Z,1513240587.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:28.059Z,1513240588.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:28.097Z,1513240588.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:28.542Z,1513240588.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:28.593Z,1513240588.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:28.881Z,1513240588.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:28.943Z,1513240588.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:29.258Z,1513240589.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:29.274Z,1513240589.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:29.661Z,1513240589.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:29.676Z,1513240589.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:30.075Z,1513240590.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:30.098Z,1513240590.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:30.542Z,1513240590.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:30.588Z,1513240590.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:30.856Z,1513240590.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:30.874Z,1513240590.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:31.260Z,1513240591.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:31.290Z,1513240591.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:31.653Z,1513240591.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:31.692Z,1513240591.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:32.063Z,1513240592.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:32.111Z,1513240592.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:32.453Z,1513240592.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:32.565Z,1513240592.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:32.868Z,1513240592.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:32.899Z,1513240592.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:33.264Z,1513240593.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:33.343Z,1513240593.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:33.662Z,1513240593.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:33.699Z,1513240593.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:34.048Z,1513240594.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:34.107Z,1513240594.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:34.449Z,1513240594.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:34.525Z,1513240594.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:34.900Z,1513240594.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:34.951Z,1513240594.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:35.259Z,1513240595.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:35.283Z,1513240595.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:35.669Z,1513240595.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:35.714Z,1513240595.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:36.074Z,1513240596.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:36.119Z,1513240596.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:36.468Z,1513240596.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:36.488Z,1513240596.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:36.876Z,1513240596.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:36.931Z,1513240596.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:37.249Z,1513240597.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:37.287Z,1513240597.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:37.672Z,1513240597.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:37.699Z,1513240597.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:38.063Z,1513240598.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:38.103Z,1513240598.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:38.514Z,1513240598.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:38.553Z,1513240598.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:38.878Z,1513240598.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:38.950Z,1513240598.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:39.249Z,1513240599.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:39.264Z,1513240599.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:39.660Z,1513240599.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:39.691Z,1513240599.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:40.064Z,1513240600.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:40.103Z,1513240600.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:40.510Z,1513240600.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:40.551Z,1513240600.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:40.849Z,1513240600.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:40.898Z,1513240600.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:41.249Z,1513240601.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:41.324Z,1513240601.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:41.657Z,1513240601.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:41.702Z,1513240601.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:42.064Z,1513240602.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:42.099Z,1513240602.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:42.510Z,1513240602.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:42.528Z,1513240602.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:42.873Z,1513240602.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:42.899Z,1513240602.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:43.254Z,1513240603.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:43.274Z,1513240603.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:43.654Z,1513240603.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:43.672Z,1513240603.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:44.060Z,1513240604.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:44.075Z,1513240604.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:44.462Z,1513240604.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:44.532Z,1513240604.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:44.865Z,1513240604.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:44.904Z,1513240604.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:45.266Z,1513240605.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:45.316Z,1513240605.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:45.663Z,1513240605.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:45.688Z,1513240605.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:46.055Z,1513240606.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:46.097Z,1513240606.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:46.453Z,1513240606.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:46.471Z,1513240606.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:46.851Z,1513240606.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:46.875Z,1513240606.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:47.251Z,1513240607.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:47.274Z,1513240607.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:47.659Z,1513240607.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:47.674Z,1513240607.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:48.067Z,1513240608.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:48.087Z,1513240608.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:48.468Z,1513240608.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:48.483Z,1513240608.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:48.910Z,1513240608.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:48.928Z,1513240608.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:49.261Z,1513240609.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:49.276Z,1513240609.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:49.655Z,1513240609.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:49.672Z,1513240609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:50.060Z,1513240610.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:50.076Z,1513240610.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:50.444Z,1513240610.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:50.470Z,1513240610.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:50.917Z,1513240610.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:50.974Z,1513240610.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:51.271Z,1513240611.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:51.287Z,1513240611.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:51.657Z,1513240611.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:51.685Z,1513240611.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:52.047Z,1513240612.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:52.078Z,1513240612.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:52.491Z,1513240612.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:52.546Z,1513240612.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:52.854Z,1513240612.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:52.868Z,1513240612.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:53.252Z,1513240613.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:53.280Z,1513240613.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:53.661Z,1513240613.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:53.677Z,1513240613.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:54.070Z,1513240614.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:54.127Z,1513240614.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:54.515Z,1513240614.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:54.550Z,1513240614.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:54.852Z,1513240614.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:54.881Z,1513240614.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:55.247Z,1513240615.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:55.280Z,1513240615.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:55.672Z,1513240615.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:55.687Z,1513240615.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:56.073Z,1513240616.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:56.137Z,1513240616.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:56.493Z,1513240616.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:56.550Z,1513240616.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:56.868Z,1513240616.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:56.899Z,1513240616.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:57.281Z,1513240617.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:57.362Z,1513240617.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:57.665Z,1513240617.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:57.684Z,1513240617.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:58.067Z,1513240618.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:58.081Z,1513240618.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:58.510Z,1513240618.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:58.571Z,1513240618.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:58.848Z,1513240618.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:58.891Z,1513240618.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:59.256Z,1513240619.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:59.303Z,1513240619.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:36:59.659Z,1513240619.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:36:59.689Z,1513240619.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:00.058Z,1513240620.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:00.095Z,1513240620.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:00.537Z,1513240620.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:00.598Z,1513240620.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:00.869Z,1513240620.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:00.907Z,1513240620.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:01.255Z,1513240621.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:01.275Z,1513240621.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:01.655Z,1513240621.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:01.669Z,1513240621.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:02.055Z,1513240622.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:02.083Z,1513240622.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:02.447Z,1513240622.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:02.467Z,1513240622.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:02.898Z,1513240622.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:02.925Z,1513240622.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:03.274Z,1513240623.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:03.288Z,1513240623.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:03.667Z,1513240623.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:03.682Z,1513240623.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:04.047Z,1513240624.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:04.082Z,1513240624.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:04.452Z,1513240624.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:04.480Z,1513240624.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:04.914Z,1513240624.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:04.951Z,1513240624.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:05.251Z,1513240625.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:05.283Z,1513240625.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:05.670Z,1513240625.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:05.686Z,1513240625.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:06.061Z,1513240626.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:06.083Z,1513240626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:06.512Z,1513240626.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:06.559Z,1513240626.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:10.002Z,1513240630.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:10.083Z,1513240630.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:10.183Z,1513240630.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:10.223Z,1513240630.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:10.592Z,1513240630.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:10.607Z,1513240630.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:10.999Z,1513240630.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:11.017Z,1513240631.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:11.378Z,1513240631.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:11.412Z,1513240631.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:11.767Z,1513240631.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:11.802Z,1513240631.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:12.171Z,1513240632.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:12.203Z,1513240632.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:12.570Z,1513240632.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:12.607Z,1513240632.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:12.978Z,1513240632.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:13.011Z,1513240633.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:13.383Z,1513240633.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:13.432Z,1513240633.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:13.778Z,1513240633.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:13.805Z,1513240633.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:14.167Z,1513240634.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:14.203Z,1513240634.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:14.599Z,1513240634.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:14.621Z,1513240634.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:14.969Z,1513240634.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:14.984Z,1513240634.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:15.373Z,1513240635.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:15.388Z,1513240635.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:15.786Z,1513240635.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:15.811Z,1513240635.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:16.181Z,1513240636.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:16.213Z,1513240636.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:16.609Z,1513240636.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:16.636Z,1513240636.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:16.978Z,1513240636.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:16.993Z,1513240636.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:17.372Z,1513240637.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:17.409Z,1513240637.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:17.773Z,1513240637.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:17.788Z,1513240637.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:18.178Z,1513240638.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:18.192Z,1513240638.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:18.574Z,1513240638.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:18.590Z,1513240638.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:18.990Z,1513240638.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:19.021Z,1513240639.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:19.393Z,1513240639.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:19.427Z,1513240639.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:19.804Z,1513240639.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:19.831Z,1513240639.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:20.178Z,1513240640.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:20.193Z,1513240640.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:20.577Z,1513240640.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:20.639Z,1513240640.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:20.971Z,1513240640.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:21.005Z,1513240641.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:21.380Z,1513240641.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:21.403Z,1513240641.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:21.791Z,1513240641.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:21.811Z,1513240641.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:22.190Z,1513240642.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:22.243Z,1513240642.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:22.590Z,1513240642.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:22.611Z,1513240642.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:22.971Z,1513240642.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:23.035Z,1513240643.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:23.367Z,1513240643.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:23.420Z,1513240643.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:23.771Z,1513240643.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:23.796Z,1513240643.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:24.168Z,1513240644.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:24.212Z,1513240644.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:24.568Z,1513240644.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:24.604Z,1513240644.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:24.985Z,1513240644.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:25.007Z,1513240645.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:25.390Z,1513240645.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:25.404Z,1513240645.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:25.786Z,1513240645.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:25.801Z,1513240645.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:26.192Z,1513240646.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:26.216Z,1513240646.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:26.568Z,1513240646.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:26.608Z,1513240646.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:26.966Z,1513240646.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:26.982Z,1513240646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:27.371Z,1513240647.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:27.388Z,1513240647.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:27.790Z,1513240647.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:27.815Z,1513240647.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:28.178Z,1513240648.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:28.209Z,1513240648.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:28.609Z,1513240648.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:28.624Z,1513240648.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:28.973Z,1513240648.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:28.989Z,1513240648.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:29.395Z,1513240649.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:29.431Z,1513240649.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:29.772Z,1513240649.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:29.795Z,1513240649.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:30.177Z,1513240650.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:30.191Z,1513240650.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:30.578Z,1513240650.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:30.593Z,1513240650.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:30.978Z,1513240650.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:30.999Z,1513240650.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:31.390Z,1513240651.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:31.404Z,1513240651.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:31.782Z,1513240651.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:31.798Z,1513240651.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:32.179Z,1513240652.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:32.193Z,1513240652.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:32.602Z,1513240652.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:32.656Z,1513240652.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:32.977Z,1513240652.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:32.999Z,1513240652.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:33.374Z,1513240653.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:33.397Z,1513240653.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:33.786Z,1513240653.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:33.801Z,1513240653.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:34.186Z,1513240654.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:34.202Z,1513240654.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:34.584Z,1513240654.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:34.604Z,1513240654.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:34.980Z,1513240654.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:34.995Z,1513240654.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:35.384Z,1513240655.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:35.404Z,1513240655.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:35.808Z,1513240655.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:35.834Z,1513240655.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:36.177Z,1513240656.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:36.199Z,1513240656.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:36.575Z,1513240656.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:36.590Z,1513240656.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:36.984Z,1513240656.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:36.999Z,1513240656.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:37.386Z,1513240657.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:37.401Z,1513240657.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:37.786Z,1513240657.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:37.854Z,1513240657.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:38.177Z,1513240658.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:38.192Z,1513240658.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:38.577Z,1513240658.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:38.599Z,1513240658.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:39.012Z,1513240659.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:39.043Z,1513240659.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:39.367Z,1513240659.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:39.392Z,1513240659.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:39.789Z,1513240659.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:39.804Z,1513240659.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:40.181Z,1513240660.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:40.196Z,1513240660.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:40.581Z,1513240660.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:40.603Z,1513240660.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:40.979Z,1513240660.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:40.995Z,1513240660.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:41.378Z,1513240661.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:41.393Z,1513240661.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:41.780Z,1513240661.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:41.794Z,1513240661.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:42.209Z,1513240662.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:42.224Z,1513240662.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:42.600Z,1513240662.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:42.623Z,1513240662.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:42.981Z,1513240662.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:43.040Z,1513240663.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:43.381Z,1513240663.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:43.403Z,1513240663.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:43.782Z,1513240663.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:43.796Z,1513240663.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:44.179Z,1513240664.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:44.193Z,1513240664.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:44.579Z,1513240664.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:44.647Z,1513240664.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:44.982Z,1513240664.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:44.997Z,1513240664.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:45.381Z,1513240665.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:45.427Z,1513240665.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:45.786Z,1513240665.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:45.801Z,1513240665.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:46.181Z,1513240666.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:46.227Z,1513240666.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:46.581Z,1513240666.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:46.596Z,1513240666.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:46.977Z,1513240666.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:46.992Z,1513240666.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:47.380Z,1513240667.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:47.399Z,1513240667.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:47.780Z,1513240667.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:47.794Z,1513240667.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:48.180Z,1513240668.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:48.195Z,1513240668.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:48.197Z,1513240668.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:48.197Z,1513240668.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 162
2017-12-14T08:37:48.197Z,1513240668.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:37:48.199Z,1513240668.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:48.199Z,1513240668.199 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2017-12-14T08:37:48.199Z,1513240668.199 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:37:48.233Z,1513240668.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:37:48.233Z,1513240668.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:37:48.575Z,1513240668.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:48.595Z,1513240668.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:48.595Z,1513240668.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162
2017-12-14T08:37:48.595Z,1513240668.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:37:48.608Z,1513240668.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:37:48.625Z,1513240668.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:37:48.625Z,1513240668.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 162
2017-12-14T08:37:48.625Z,1513240668.625 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:37:48.625Z,1513240668.625 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2017-12-14T08:37:48.984Z,1513240668.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:48.998Z,1513240668.998 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:37:48.999Z,1513240668.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:37:48.999Z,1513240668.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:37:48.000Z,1513240669.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:37:49.000Z,1513240669.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:37:49.000Z,1513240669.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:37:49.012Z,1513240669.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:37:49.012Z,1513240669.012 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162
2017-12-14T08:37:49.390Z,1513240669.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:49.410Z,1513240669.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:37:49.410Z,1513240669.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:37:49.410Z,1513240669.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:37:49.790Z,1513240669.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:49.811Z,1513240669.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:50.178Z,1513240670.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:50.196Z,1513240670.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:50.576Z,1513240670.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:50.595Z,1513240670.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:50.980Z,1513240670.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:50.995Z,1513240670.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:51.384Z,1513240671.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:51.403Z,1513240671.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:51.790Z,1513240671.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:51.805Z,1513240671.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:52.187Z,1513240672.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:52.232Z,1513240672.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:52.590Z,1513240672.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:52.604Z,1513240672.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:52.967Z,1513240672.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:52.994Z,1513240672.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:53.371Z,1513240673.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:53.398Z,1513240673.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:53.771Z,1513240673.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:53.796Z,1513240673.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:54.169Z,1513240674.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:54.204Z,1513240674.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:54.568Z,1513240674.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:54.619Z,1513240674.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:54.994Z,1513240674.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:55.021Z,1513240675.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:55.418Z,1513240675.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:55.450Z,1513240675.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:55.798Z,1513240675.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:55.813Z,1513240675.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:56.168Z,1513240676.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:56.202Z,1513240676.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:56.589Z,1513240676.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:56.621Z,1513240676.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:56.970Z,1513240676.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:56.997Z,1513240676.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:57.368Z,1513240677.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:57.384Z,1513240677.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:57.786Z,1513240677.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:57.819Z,1513240677.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:58.182Z,1513240678.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:58.207Z,1513240678.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:58.599Z,1513240678.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:58.655Z,1513240678.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:58.979Z,1513240678.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:59.008Z,1513240679.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:59.368Z,1513240679.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:59.388Z,1513240679.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:37:59.783Z,1513240679.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:37:59.813Z,1513240679.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:00.176Z,1513240680.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:00.192Z,1513240680.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:00.574Z,1513240680.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:00.589Z,1513240680.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:00.989Z,1513240680.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:01.014Z,1513240681.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:01.389Z,1513240681.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:01.418Z,1513240681.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:01.802Z,1513240681.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:01.822Z,1513240681.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:02.174Z,1513240682.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:02.196Z,1513240682.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:02.580Z,1513240682.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:02.595Z,1513240682.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:02.973Z,1513240682.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:02.999Z,1513240682.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:03.377Z,1513240683.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:03.391Z,1513240683.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:03.783Z,1513240683.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:03.798Z,1513240683.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:04.182Z,1513240684.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:04.247Z,1513240684.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:04.582Z,1513240684.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:04.603Z,1513240684.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:05.004Z,1513240685.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:05.035Z,1513240685.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:05.375Z,1513240685.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:05.391Z,1513240685.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:05.775Z,1513240685.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:05.802Z,1513240685.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:06.183Z,1513240686.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:06.252Z,1513240686.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:06.574Z,1513240686.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:06.649Z,1513240686.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:09.987Z,1513240689.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:10.009Z,1513240690.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:10.126Z,1513240690.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:10.159Z,1513240690.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:10.551Z,1513240690.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:10.619Z,1513240690.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:10.934Z,1513240690.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:10.950Z,1513240690.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:11.291Z,1513240691.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:11.394Z,1513240691.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:11.705Z,1513240691.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:11.720Z,1513240691.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:12.102Z,1513240692.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:12.116Z,1513240692.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:12.502Z,1513240692.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:12.518Z,1513240692.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:12.893Z,1513240692.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:12.920Z,1513240692.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:13.299Z,1513240693.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:13.314Z,1513240693.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:13.702Z,1513240693.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:13.716Z,1513240693.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:14.101Z,1513240694.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:14.123Z,1513240694.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:14.522Z,1513240694.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:14.570Z,1513240694.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:14.893Z,1513240694.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:14.930Z,1513240694.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:15.299Z,1513240695.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:15.314Z,1513240695.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:15.706Z,1513240695.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:15.815Z,1513240695.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:16.106Z,1513240696.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:16.120Z,1513240696.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:16.541Z,1513240696.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:16.563Z,1513240696.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:16.902Z,1513240696.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:16.917Z,1513240696.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:17.295Z,1513240697.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:17.311Z,1513240697.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:17.725Z,1513240697.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:17.760Z,1513240697.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:18.095Z,1513240698.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:18.164Z,1513240698.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:18.543Z,1513240698.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:18.559Z,1513240698.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:18.906Z,1513240698.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:18.921Z,1513240698.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:19.306Z,1513240699.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:19.320Z,1513240699.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:19.704Z,1513240699.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:19.751Z,1513240699.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:20.104Z,1513240700.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:20.118Z,1513240700.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:20.542Z,1513240700.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:20.561Z,1513240700.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:20.892Z,1513240700.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:20.943Z,1513240700.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:21.297Z,1513240701.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:21.341Z,1513240701.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:21.700Z,1513240701.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:21.715Z,1513240701.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:22.106Z,1513240702.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:22.120Z,1513240702.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:22.536Z,1513240702.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:22.557Z,1513240702.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:22.901Z,1513240702.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:22.916Z,1513240702.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:23.299Z,1513240703.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:23.314Z,1513240703.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:23.695Z,1513240703.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:23.711Z,1513240703.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:24.100Z,1513240704.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:24.114Z,1513240704.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:24.557Z,1513240704.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:24.608Z,1513240704.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:24.902Z,1513240704.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:24.925Z,1513240704.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:25.312Z,1513240705.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:25.326Z,1513240705.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:25.705Z,1513240705.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:25.730Z,1513240705.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:26.099Z,1513240706.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:26.123Z,1513240706.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:26.487Z,1513240706.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:26.513Z,1513240706.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:26.914Z,1513240706.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:26.934Z,1513240706.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:27.302Z,1513240707.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:27.316Z,1513240707.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:27.721Z,1513240707.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:27.756Z,1513240707.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:28.112Z,1513240708.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:28.127Z,1513240708.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:28.509Z,1513240708.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:28.524Z,1513240708.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:28.890Z,1513240708.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:28.924Z,1513240708.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:29.287Z,1513240709.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:29.314Z,1513240709.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:29.710Z,1513240709.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:29.730Z,1513240709.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:30.116Z,1513240710.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:30.131Z,1513240710.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:30.544Z,1513240710.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:30.566Z,1513240710.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:30.939Z,1513240710.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:30.978Z,1513240710.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:31.299Z,1513240711.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:31.325Z,1513240711.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:31.694Z,1513240711.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:31.763Z,1513240711.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:32.096Z,1513240712.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:32.119Z,1513240712.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:32.527Z,1513240712.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:32.587Z,1513240712.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:32.903Z,1513240712.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:32.919Z,1513240712.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:33.311Z,1513240713.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:33.366Z,1513240713.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:33.709Z,1513240713.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:33.747Z,1513240713.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:34.111Z,1513240714.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:34.156Z,1513240714.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:34.523Z,1513240714.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:34.562Z,1513240714.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:34.892Z,1513240714.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:34.924Z,1513240714.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:35.292Z,1513240715.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:35.331Z,1513240715.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:35.699Z,1513240715.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:35.735Z,1513240715.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:36.110Z,1513240716.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:36.136Z,1513240716.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:36.545Z,1513240716.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:36.563Z,1513240716.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:36.900Z,1513240716.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:36.924Z,1513240716.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:37.328Z,1513240717.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:37.387Z,1513240717.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:37.692Z,1513240717.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:37.707Z,1513240717.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:38.093Z,1513240718.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:38.124Z,1513240718.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:38.520Z,1513240718.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:38.603Z,1513240718.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:38.906Z,1513240718.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:38.921Z,1513240718.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:39.306Z,1513240719.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:39.321Z,1513240719.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:39.707Z,1513240719.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:39.721Z,1513240719.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:40.093Z,1513240720.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:40.109Z,1513240720.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:40.526Z,1513240720.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:40.564Z,1513240720.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:40.896Z,1513240720.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:40.927Z,1513240720.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:41.288Z,1513240721.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:41.319Z,1513240721.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:41.705Z,1513240721.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:41.755Z,1513240721.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:42.110Z,1513240722.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:42.126Z,1513240722.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:42.509Z,1513240722.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:42.524Z,1513240722.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:42.905Z,1513240722.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:42.930Z,1513240722.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:43.291Z,1513240723.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:43.319Z,1513240723.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:43.764Z,1513240723.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:43.788Z,1513240723.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:44.112Z,1513240724.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:44.127Z,1513240724.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:44.556Z,1513240724.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:44.571Z,1513240724.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:44.891Z,1513240724.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:44.927Z,1513240724.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:45.287Z,1513240725.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:45.323Z,1513240725.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:45.688Z,1513240725.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:45.726Z,1513240725.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:46.093Z,1513240726.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:46.124Z,1513240726.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:46.526Z,1513240726.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:46.566Z,1513240726.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:46.936Z,1513240726.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:46.976Z,1513240726.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:47.298Z,1513240727.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:47.325Z,1513240727.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:47.705Z,1513240727.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:47.739Z,1513240727.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:48.094Z,1513240728.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:48.108Z,1513240728.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:48.534Z,1513240728.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:48.561Z,1513240728.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:48.899Z,1513240728.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:48.915Z,1513240728.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:49.295Z,1513240729.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:49.315Z,1513240729.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:49.710Z,1513240729.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:49.740Z,1513240729.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:50.136Z,1513240730.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:50.167Z,1513240730.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:50.542Z,1513240730.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:50.572Z,1513240730.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:50.904Z,1513240730.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:50.941Z,1513240730.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:51.295Z,1513240731.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:51.315Z,1513240731.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:51.696Z,1513240731.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:51.711Z,1513240731.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:52.099Z,1513240732.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:52.115Z,1513240732.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:52.504Z,1513240732.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:52.572Z,1513240732.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:52.910Z,1513240732.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:52.925Z,1513240732.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:53.323Z,1513240733.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:53.351Z,1513240733.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:53.710Z,1513240733.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:53.759Z,1513240733.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:54.098Z,1513240734.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:54.155Z,1513240734.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:54.494Z,1513240734.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:54.509Z,1513240734.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:54.904Z,1513240734.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:54.919Z,1513240734.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:55.296Z,1513240735.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:55.344Z,1513240735.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:55.709Z,1513240735.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:55.744Z,1513240735.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:56.101Z,1513240736.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:56.150Z,1513240736.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:56.515Z,1513240736.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:56.546Z,1513240736.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:56.904Z,1513240736.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:56.919Z,1513240736.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:57.301Z,1513240737.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:57.316Z,1513240737.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:57.706Z,1513240737.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:57.721Z,1513240737.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:58.098Z,1513240738.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:58.122Z,1513240738.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:58.540Z,1513240738.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:58.575Z,1513240738.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:58.895Z,1513240738.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:58.919Z,1513240738.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:59.295Z,1513240739.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:59.329Z,1513240739.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:38:59.733Z,1513240739.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:38:59.782Z,1513240739.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:00.096Z,1513240740.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:00.111Z,1513240740.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:00.533Z,1513240740.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:00.563Z,1513240740.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:00.910Z,1513240740.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:00.932Z,1513240740.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:01.309Z,1513240741.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:01.335Z,1513240741.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:01.702Z,1513240741.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:01.716Z,1513240741.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:02.099Z,1513240742.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:02.114Z,1513240742.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:02.538Z,1513240742.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:02.560Z,1513240742.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:02.899Z,1513240742.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:02.955Z,1513240742.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:03.296Z,1513240743.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:03.315Z,1513240743.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:03.709Z,1513240743.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:03.724Z,1513240743.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:04.098Z,1513240744.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:04.113Z,1513240744.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:04.546Z,1513240744.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:04.598Z,1513240744.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:04.892Z,1513240744.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:04.920Z,1513240744.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:05.300Z,1513240745.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:05.316Z,1513240745.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:05.319Z,1513240745.319 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:34:05.3Z
2017-12-14T08:39:05.319Z,1513240745.319 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T08:39:05.320Z,1513240745.320 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T08:39:05.701Z,1513240745.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:05.716Z,1513240745.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:06.645Z,1513240746.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:06.660Z,1513240746.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:06.760Z,1513240746.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:06.793Z,1513240746.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:10.148Z,1513240750.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:10.163Z,1513240750.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:10.237Z,1513240750.237 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0188.lzma
2017-12-14T08:39:10.269Z,1513240750.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:10.305Z,1513240750.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:10.638Z,1513240750.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:10.653Z,1513240750.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:11.012Z,1513240751.012 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0188.lzma.bak
2017-12-14T08:39:11.012Z,1513240751.012 [DataOverHttps](INFO): SBD MOMSN=5438361
2017-12-14T08:39:11.054Z,1513240751.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:11.069Z,1513240751.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:11.106Z,1513240751.106 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:39:12.219Z,1513240752.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:12.248Z,1513240752.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:12.355Z,1513240752.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:12.370Z,1513240752.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:15.703Z,1513240755.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:15.724Z,1513240755.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:15.830Z,1513240755.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:15.898Z,1513240755.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:16.230Z,1513240756.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:16.260Z,1513240756.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:16.614Z,1513240756.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:16.671Z,1513240756.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:17.018Z,1513240757.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:17.082Z,1513240757.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:17.412Z,1513240757.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:17.432Z,1513240757.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:20.894Z,1513240760.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:20.966Z,1513240760.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:21.032Z,1513240761.032 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0189.lzma
2017-12-14T08:39:21.100Z,1513240761.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:21.135Z,1513240761.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:21.438Z,1513240761.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:21.487Z,1513240761.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:21.989Z,1513240761.989 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0189.lzma.bak
2017-12-14T08:39:21.989Z,1513240761.989 [DataOverHttps](INFO): SBD MOMSN=5438363
2017-12-14T08:39:22.021Z,1513240762.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:22.063Z,1513240762.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:23.164Z,1513240763.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:23.179Z,1513240763.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:23.182Z,1513240763.182 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T08:39:23.182Z,1513240763.182 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T08:39:23.182Z,1513240763.182 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T08:39:23.304Z,1513240763.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:23.337Z,1513240763.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:26.733Z,1513240766.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:26.770Z,1513240766.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:26.890Z,1513240766.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:26.937Z,1513240766.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:27.228Z,1513240767.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:27.255Z,1513240767.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:27.632Z,1513240767.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:27.647Z,1513240767.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:28.030Z,1513240768.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:28.046Z,1513240768.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:28.421Z,1513240768.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:28.510Z,1513240768.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:28.855Z,1513240768.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:28.886Z,1513240768.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:29.229Z,1513240769.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:29.252Z,1513240769.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:29.633Z,1513240769.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:29.681Z,1513240769.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:30.021Z,1513240770.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:30.036Z,1513240770.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:30.416Z,1513240770.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:30.431Z,1513240770.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:30.821Z,1513240770.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:30.840Z,1513240770.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:31.222Z,1513240771.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:31.242Z,1513240771.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:31.625Z,1513240771.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:31.640Z,1513240771.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:32.070Z,1513240772.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:32.129Z,1513240772.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:32.471Z,1513240772.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:32.545Z,1513240772.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:32.829Z,1513240772.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:32.852Z,1513240772.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:33.223Z,1513240773.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:33.240Z,1513240773.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:33.622Z,1513240773.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:33.643Z,1513240773.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:34.029Z,1513240774.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:34.044Z,1513240774.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:34.422Z,1513240774.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:34.448Z,1513240774.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:34.869Z,1513240774.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:34.901Z,1513240774.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:35.265Z,1513240775.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:35.296Z,1513240775.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:35.649Z,1513240775.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:35.671Z,1513240775.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:36.016Z,1513240776.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:36.055Z,1513240776.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:36.416Z,1513240776.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:36.452Z,1513240776.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:36.874Z,1513240776.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:36.907Z,1513240776.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:37.222Z,1513240777.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:37.258Z,1513240777.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:37.636Z,1513240777.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:37.667Z,1513240777.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:38.030Z,1513240778.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:38.044Z,1513240778.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:38.455Z,1513240778.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:38.483Z,1513240778.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:38.867Z,1513240778.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:38.891Z,1513240778.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:39.219Z,1513240779.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:39.239Z,1513240779.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:39.634Z,1513240779.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:39.650Z,1513240779.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:40.030Z,1513240780.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:40.045Z,1513240780.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:40.429Z,1513240780.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:40.519Z,1513240780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:40.816Z,1513240780.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:40.832Z,1513240780.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:41.220Z,1513240781.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:41.239Z,1513240781.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:41.640Z,1513240781.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:41.726Z,1513240781.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:42.070Z,1513240782.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:42.085Z,1513240782.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:42.430Z,1513240782.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:42.524Z,1513240782.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:42.829Z,1513240782.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:42.847Z,1513240782.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:43.216Z,1513240783.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:43.266Z,1513240783.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:43.616Z,1513240783.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:43.635Z,1513240783.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:44.016Z,1513240784.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:44.030Z,1513240784.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:44.411Z,1513240784.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:44.431Z,1513240784.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:44.832Z,1513240784.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:44.858Z,1513240784.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:45.234Z,1513240785.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:45.250Z,1513240785.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:45.634Z,1513240785.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:45.650Z,1513240785.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:46.016Z,1513240786.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:46.040Z,1513240786.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:46.418Z,1513240786.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:46.434Z,1513240786.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:46.816Z,1513240786.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:46.831Z,1513240786.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:47.219Z,1513240787.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:47.235Z,1513240787.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:47.619Z,1513240787.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:47.635Z,1513240787.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:48.031Z,1513240788.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:48.052Z,1513240788.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:48.426Z,1513240788.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:48.442Z,1513240788.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:48.825Z,1513240788.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:48.848Z,1513240788.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:49.214Z,1513240789.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:49.228Z,1513240789.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:49.619Z,1513240789.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:49.639Z,1513240789.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:50.017Z,1513240790.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:50.092Z,1513240790.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:50.408Z,1513240790.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:50.423Z,1513240790.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:50.878Z,1513240790.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:50.898Z,1513240790.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:51.229Z,1513240791.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:51.244Z,1513240791.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:51.629Z,1513240791.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:51.668Z,1513240791.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:52.013Z,1513240792.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:52.028Z,1513240792.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:52.416Z,1513240792.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:52.432Z,1513240792.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:52.875Z,1513240792.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:52.900Z,1513240792.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:53.216Z,1513240793.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:53.231Z,1513240793.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:53.629Z,1513240793.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:53.644Z,1513240793.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:54.021Z,1513240794.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:54.035Z,1513240794.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:54.426Z,1513240794.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:54.505Z,1513240794.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:54.819Z,1513240794.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:54.834Z,1513240794.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:55.220Z,1513240795.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:55.234Z,1513240795.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:55.612Z,1513240795.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:55.627Z,1513240795.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:56.029Z,1513240796.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:56.045Z,1513240796.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:56.425Z,1513240796.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:56.475Z,1513240796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:56.830Z,1513240796.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:56.851Z,1513240796.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:57.217Z,1513240797.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:57.233Z,1513240797.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:57.615Z,1513240797.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:57.629Z,1513240797.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:58.017Z,1513240798.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:58.032Z,1513240798.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:58.415Z,1513240798.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:58.429Z,1513240798.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:58.825Z,1513240798.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:58.847Z,1513240798.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:59.230Z,1513240799.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:59.254Z,1513240799.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:39:59.627Z,1513240799.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:39:59.650Z,1513240799.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:00.018Z,1513240800.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:00.046Z,1513240800.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:00.422Z,1513240800.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:00.508Z,1513240800.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:00.815Z,1513240800.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:00.841Z,1513240800.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:01.216Z,1513240801.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:01.243Z,1513240801.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:01.615Z,1513240801.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:01.639Z,1513240801.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:02.027Z,1513240802.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:02.066Z,1513240802.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:02.430Z,1513240802.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:02.452Z,1513240802.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:02.827Z,1513240802.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:02.851Z,1513240802.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:03.215Z,1513240803.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:03.243Z,1513240803.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:03.633Z,1513240803.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:03.702Z,1513240803.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:04.022Z,1513240804.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:04.087Z,1513240804.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:04.427Z,1513240804.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:04.442Z,1513240804.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:04.890Z,1513240804.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:04.946Z,1513240804.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:05.239Z,1513240805.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:05.259Z,1513240805.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:05.638Z,1513240805.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:05.694Z,1513240805.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:06.030Z,1513240806.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:06.044Z,1513240806.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:06.428Z,1513240806.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:06.447Z,1513240806.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:06.899Z,1513240806.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:06.946Z,1513240806.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:07.229Z,1513240807.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:07.243Z,1513240807.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:07.634Z,1513240807.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:07.649Z,1513240807.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:08.037Z,1513240808.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:08.051Z,1513240808.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:08.429Z,1513240808.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:08.512Z,1513240808.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:08.815Z,1513240808.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:08.851Z,1513240808.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:09.217Z,1513240809.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:09.248Z,1513240809.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:09.619Z,1513240809.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:09.657Z,1513240809.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:10.029Z,1513240810.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:10.055Z,1513240810.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:10.495Z,1513240810.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:10.557Z,1513240810.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:10.821Z,1513240810.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:10.853Z,1513240810.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:11.258Z,1513240811.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:11.272Z,1513240811.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:11.622Z,1513240811.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:11.653Z,1513240811.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:12.026Z,1513240812.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:12.040Z,1513240812.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:12.422Z,1513240812.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:12.472Z,1513240812.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:12.829Z,1513240812.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:12.855Z,1513240812.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:13.259Z,1513240813.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:13.324Z,1513240813.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:13.633Z,1513240813.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:13.648Z,1513240813.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:14.022Z,1513240814.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:14.082Z,1513240814.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:14.420Z,1513240814.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:14.503Z,1513240814.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:14.824Z,1513240814.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:14.855Z,1513240814.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:15.218Z,1513240815.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:15.255Z,1513240815.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:15.620Z,1513240815.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:15.654Z,1513240815.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:16.039Z,1513240816.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:16.055Z,1513240816.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:16.438Z,1513240816.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:16.473Z,1513240816.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:16.833Z,1513240816.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:16.855Z,1513240816.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:17.230Z,1513240817.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:17.245Z,1513240817.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:17.629Z,1513240817.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:17.653Z,1513240817.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:18.015Z,1513240818.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:18.052Z,1513240818.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:18.427Z,1513240818.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:18.448Z,1513240818.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:18.879Z,1513240818.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:18.910Z,1513240818.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:19.239Z,1513240819.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:19.254Z,1513240819.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:19.641Z,1513240819.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:19.660Z,1513240819.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:20.037Z,1513240820.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:20.055Z,1513240820.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:20.415Z,1513240820.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:20.449Z,1513240820.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:20.875Z,1513240820.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:20.921Z,1513240820.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:21.218Z,1513240821.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:21.259Z,1513240821.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:21.629Z,1513240821.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:21.660Z,1513240821.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:22.033Z,1513240822.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:22.063Z,1513240822.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:22.434Z,1513240822.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:22.519Z,1513240822.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:22.887Z,1513240822.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:22.924Z,1513240822.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:23.230Z,1513240823.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:23.246Z,1513240823.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:23.642Z,1513240823.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:23.677Z,1513240823.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:27.138Z,1513240827.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:27.203Z,1513240827.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:27.322Z,1513240827.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:27.356Z,1513240827.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:27.686Z,1513240827.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:27.728Z,1513240827.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:28.093Z,1513240828.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:28.108Z,1513240828.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:28.530Z,1513240828.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:28.580Z,1513240828.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:28.906Z,1513240828.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:28.929Z,1513240828.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:29.298Z,1513240829.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:29.319Z,1513240829.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:29.690Z,1513240829.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:29.711Z,1513240829.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:30.075Z,1513240830.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:30.103Z,1513240830.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:30.465Z,1513240830.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:30.479Z,1513240830.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:30.895Z,1513240830.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:30.922Z,1513240830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:31.283Z,1513240831.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:31.298Z,1513240831.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:31.689Z,1513240831.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:31.705Z,1513240831.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:32.090Z,1513240832.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:32.105Z,1513240832.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:32.522Z,1513240832.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:32.547Z,1513240832.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:32.894Z,1513240832.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:32.917Z,1513240832.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:33.287Z,1513240833.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:33.307Z,1513240833.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:33.698Z,1513240833.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:33.719Z,1513240833.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:34.088Z,1513240834.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:34.103Z,1513240834.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:34.490Z,1513240834.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:34.506Z,1513240834.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:34.885Z,1513240834.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:34.930Z,1513240834.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:35.272Z,1513240835.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:35.300Z,1513240835.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:35.699Z,1513240835.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:35.719Z,1513240835.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:36.108Z,1513240836.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:36.127Z,1513240836.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:36.553Z,1513240836.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:36.575Z,1513240836.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:36.875Z,1513240836.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:36.920Z,1513240836.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:37.275Z,1513240837.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:37.307Z,1513240837.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:37.671Z,1513240837.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:37.706Z,1513240837.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:38.076Z,1513240838.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:38.156Z,1513240838.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:38.529Z,1513240838.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:38.548Z,1513240838.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:38.916Z,1513240838.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:38.948Z,1513240838.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:39.308Z,1513240839.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:39.323Z,1513240839.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:39.694Z,1513240839.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:39.709Z,1513240839.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:40.076Z,1513240840.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:40.104Z,1513240840.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:40.528Z,1513240840.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:40.572Z,1513240840.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:40.879Z,1513240840.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:40.894Z,1513240840.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:41.281Z,1513240841.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:41.296Z,1513240841.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:41.682Z,1513240841.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:41.697Z,1513240841.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:42.112Z,1513240842.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:42.172Z,1513240842.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:42.540Z,1513240842.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:42.563Z,1513240842.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:42.880Z,1513240842.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:42.912Z,1513240842.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:43.283Z,1513240843.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:43.298Z,1513240843.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:43.690Z,1513240843.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:43.704Z,1513240843.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:44.081Z,1513240844.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:44.108Z,1513240844.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:44.471Z,1513240844.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:44.557Z,1513240844.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:44.900Z,1513240844.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:44.916Z,1513240844.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:45.296Z,1513240845.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:45.331Z,1513240845.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:45.682Z,1513240845.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:45.697Z,1513240845.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:46.082Z,1513240846.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:46.096Z,1513240846.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:46.478Z,1513240846.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:46.503Z,1513240846.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:46.888Z,1513240846.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:46.931Z,1513240846.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:47.281Z,1513240847.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:47.295Z,1513240847.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:47.694Z,1513240847.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:47.708Z,1513240847.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:48.090Z,1513240848.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:48.105Z,1513240848.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:48.485Z,1513240848.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:48.501Z,1513240848.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:48.910Z,1513240848.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:49.011Z,1513240849.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:49.021Z,1513240849.021 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:49.021Z,1513240849.021 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 163
2017-12-14T08:40:49.021Z,1513240849.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:40:49.023Z,1513240849.023 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:49.023Z,1513240849.023 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2017-12-14T08:40:49.023Z,1513240849.023 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:40:49.052Z,1513240849.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:40:49.052Z,1513240849.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:40:49.283Z,1513240849.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:49.309Z,1513240849.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:49.321Z,1513240849.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:40:49.321Z,1513240849.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 163
2017-12-14T08:40:49.321Z,1513240849.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:40:49.321Z,1513240849.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2017-12-14T08:40:49.694Z,1513240849.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:49.713Z,1513240849.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:49.713Z,1513240849.713 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163
2017-12-14T08:40:49.713Z,1513240849.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:40:49.714Z,1513240849.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:40:49.715Z,1513240849.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:40:49.715Z,1513240849.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:40:49.715Z,1513240849.715 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:40:49.716Z,1513240849.716 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:40:49.716Z,1513240849.716 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:40:49.727Z,1513240849.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:40:50.089Z,1513240850.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:50.156Z,1513240850.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:40:50.156Z,1513240850.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163
2017-12-14T08:40:50.535Z,1513240850.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:50.563Z,1513240850.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:40:50.564Z,1513240850.564 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:40:50.564Z,1513240850.564 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:40:50.869Z,1513240850.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:50.923Z,1513240850.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:51.276Z,1513240851.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:51.306Z,1513240851.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:51.679Z,1513240851.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:51.711Z,1513240851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:52.073Z,1513240852.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:52.111Z,1513240852.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:52.526Z,1513240852.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:52.565Z,1513240852.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:52.895Z,1513240852.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:52.922Z,1513240852.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:53.294Z,1513240853.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:53.310Z,1513240853.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:53.694Z,1513240853.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:53.715Z,1513240853.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:54.079Z,1513240854.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:54.111Z,1513240854.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:54.538Z,1513240854.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:54.561Z,1513240854.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:54.877Z,1513240854.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:54.923Z,1513240854.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:55.301Z,1513240855.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:55.327Z,1513240855.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:55.684Z,1513240855.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:55.703Z,1513240855.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:56.098Z,1513240856.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:56.112Z,1513240856.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:56.535Z,1513240856.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:56.566Z,1513240856.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:56.873Z,1513240856.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:56.907Z,1513240856.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:57.273Z,1513240857.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:57.305Z,1513240857.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:57.675Z,1513240857.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:57.707Z,1513240857.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:58.080Z,1513240858.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:58.107Z,1513240858.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:58.476Z,1513240858.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:58.574Z,1513240858.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:58.900Z,1513240858.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:58.974Z,1513240858.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:59.290Z,1513240859.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:59.323Z,1513240859.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:40:59.691Z,1513240859.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:40:59.722Z,1513240859.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:00.078Z,1513240860.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:00.094Z,1513240860.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:00.480Z,1513240860.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:00.495Z,1513240860.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:00.895Z,1513240860.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:00.927Z,1513240860.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:01.278Z,1513240861.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:01.300Z,1513240861.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:01.699Z,1513240861.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:01.751Z,1513240861.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:02.097Z,1513240862.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:02.134Z,1513240862.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:02.486Z,1513240862.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:02.501Z,1513240862.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:02.889Z,1513240862.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:02.924Z,1513240862.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:03.282Z,1513240863.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:03.297Z,1513240863.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:03.686Z,1513240863.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:03.701Z,1513240863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:04.097Z,1513240864.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:04.112Z,1513240864.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:04.520Z,1513240864.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:04.552Z,1513240864.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:04.871Z,1513240864.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:04.907Z,1513240864.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:05.273Z,1513240865.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:05.314Z,1513240865.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:05.672Z,1513240865.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:05.707Z,1513240865.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:06.076Z,1513240866.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:06.091Z,1513240866.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:06.537Z,1513240866.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:06.571Z,1513240866.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:06.891Z,1513240866.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:06.923Z,1513240866.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:07.290Z,1513240867.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:07.317Z,1513240867.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:07.690Z,1513240867.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:07.715Z,1513240867.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:08.092Z,1513240868.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:08.112Z,1513240868.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:08.546Z,1513240868.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:08.602Z,1513240868.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:08.899Z,1513240868.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:08.934Z,1513240868.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:09.278Z,1513240869.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:09.306Z,1513240869.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:09.695Z,1513240869.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:09.712Z,1513240869.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:10.096Z,1513240870.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:10.111Z,1513240870.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:10.543Z,1513240870.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:10.572Z,1513240870.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:10.892Z,1513240870.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:10.954Z,1513240870.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:11.294Z,1513240871.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:11.328Z,1513240871.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:11.671Z,1513240871.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:11.702Z,1513240871.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:12.092Z,1513240872.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:12.116Z,1513240872.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:12.476Z,1513240872.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:12.573Z,1513240872.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:12.898Z,1513240872.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:12.922Z,1513240872.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:13.295Z,1513240873.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:13.343Z,1513240873.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:13.694Z,1513240873.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:13.727Z,1513240873.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:14.072Z,1513240874.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:14.099Z,1513240874.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:14.481Z,1513240874.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:14.496Z,1513240874.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:14.930Z,1513240874.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:14.974Z,1513240874.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:15.272Z,1513240875.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:15.294Z,1513240875.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:15.685Z,1513240875.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:15.712Z,1513240875.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:16.100Z,1513240876.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:16.115Z,1513240876.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:16.478Z,1513240876.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:16.511Z,1513240876.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:16.889Z,1513240876.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:16.935Z,1513240876.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:17.275Z,1513240877.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:17.290Z,1513240877.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:17.686Z,1513240877.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:17.712Z,1513240877.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:18.109Z,1513240878.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:18.153Z,1513240878.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:18.539Z,1513240878.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:18.566Z,1513240878.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:18.874Z,1513240878.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:18.890Z,1513240878.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:19.318Z,1513240879.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:19.341Z,1513240879.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:19.681Z,1513240879.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:19.695Z,1513240879.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:20.085Z,1513240880.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:20.141Z,1513240880.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:20.531Z,1513240880.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:20.555Z,1513240880.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:20.918Z,1513240880.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:20.945Z,1513240880.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:21.311Z,1513240881.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:21.347Z,1513240881.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:21.688Z,1513240881.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:21.743Z,1513240881.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:22.084Z,1513240882.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:22.115Z,1513240882.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:22.523Z,1513240882.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:22.552Z,1513240882.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:22.878Z,1513240882.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:22.925Z,1513240882.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:23.284Z,1513240883.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:23.326Z,1513240883.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:23.726Z,1513240883.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:23.751Z,1513240883.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:29.101Z,1513240889.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:29.141Z,1513240889.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:29.254Z,1513240889.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:29.270Z,1513240889.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:29.613Z,1513240889.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:29.628Z,1513240889.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:30.014Z,1513240890.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:30.065Z,1513240890.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:30.428Z,1513240890.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:30.459Z,1513240890.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:30.903Z,1513240890.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:30.945Z,1513240890.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:31.232Z,1513240891.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:31.259Z,1513240891.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:31.625Z,1513240891.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:31.675Z,1513240891.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:32.019Z,1513240892.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:32.067Z,1513240892.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:32.415Z,1513240892.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:32.528Z,1513240892.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:32.815Z,1513240892.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:32.858Z,1513240892.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:33.215Z,1513240893.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:33.235Z,1513240893.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:33.605Z,1513240893.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:33.695Z,1513240893.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:34.034Z,1513240894.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:34.058Z,1513240894.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:34.498Z,1513240894.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:34.691Z,1513240894.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:34.853Z,1513240894.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:34.905Z,1513240894.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:35.214Z,1513240895.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:35.267Z,1513240895.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:35.615Z,1513240895.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:35.667Z,1513240895.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:36.014Z,1513240896.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:36.071Z,1513240896.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:36.416Z,1513240896.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:36.436Z,1513240896.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:36.831Z,1513240896.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:36.854Z,1513240896.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:37.220Z,1513240897.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:37.247Z,1513240897.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:37.620Z,1513240897.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:37.662Z,1513240897.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:38.036Z,1513240898.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:38.110Z,1513240898.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:38.410Z,1513240898.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:38.507Z,1513240898.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:38.839Z,1513240898.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:38.859Z,1513240898.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:39.206Z,1513240899.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:39.279Z,1513240899.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:39.609Z,1513240899.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:39.655Z,1513240899.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:40.020Z,1513240900.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:40.061Z,1513240900.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:40.428Z,1513240900.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:40.554Z,1513240900.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:40.819Z,1513240900.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:40.858Z,1513240900.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:41.215Z,1513240901.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:41.239Z,1513240901.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:41.615Z,1513240901.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:41.663Z,1513240901.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:42.015Z,1513240902.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:42.073Z,1513240902.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:42.414Z,1513240902.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:42.446Z,1513240902.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:42.904Z,1513240902.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:42.968Z,1513240902.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:43.230Z,1513240903.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:43.287Z,1513240903.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:43.630Z,1513240903.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:43.655Z,1513240903.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:44.003Z,1513240904.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:44.040Z,1513240904.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:44.403Z,1513240904.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:44.448Z,1513240904.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:44.871Z,1513240904.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:44.907Z,1513240904.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:45.210Z,1513240905.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:45.229Z,1513240905.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:45.625Z,1513240905.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:45.658Z,1513240905.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:46.018Z,1513240906.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:46.033Z,1513240906.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:46.426Z,1513240906.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:46.510Z,1513240906.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:46.801Z,1513240906.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:46.943Z,1513240906.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:47.216Z,1513240907.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:47.235Z,1513240907.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:47.622Z,1513240907.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:47.653Z,1513240907.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:48.017Z,1513240908.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:48.045Z,1513240908.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:48.418Z,1513240908.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:48.508Z,1513240908.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:48.822Z,1513240908.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:48.855Z,1513240908.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:49.211Z,1513240909.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:49.225Z,1513240909.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:49.605Z,1513240909.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:49.620Z,1513240909.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:50.010Z,1513240910.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:50.024Z,1513240910.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:50.405Z,1513240910.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:50.419Z,1513240910.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:50.884Z,1513240910.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:50.920Z,1513240910.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:51.225Z,1513240911.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:51.240Z,1513240911.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:51.623Z,1513240911.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:51.643Z,1513240911.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:52.003Z,1513240912.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:52.036Z,1513240912.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:52.403Z,1513240912.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:52.446Z,1513240912.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:52.808Z,1513240912.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:52.847Z,1513240912.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:53.245Z,1513240913.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:53.267Z,1513240913.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:53.611Z,1513240913.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:53.648Z,1513240913.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:54.042Z,1513240914.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:54.109Z,1513240914.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:54.431Z,1513240914.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:54.446Z,1513240914.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:54.830Z,1513240914.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:54.859Z,1513240914.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:55.216Z,1513240915.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:55.232Z,1513240915.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:55.611Z,1513240915.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:55.627Z,1513240915.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:56.014Z,1513240916.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:56.029Z,1513240916.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:56.412Z,1513240916.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:56.477Z,1513240916.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:56.854Z,1513240916.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:56.911Z,1513240916.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:57.256Z,1513240917.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:57.270Z,1513240917.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:57.630Z,1513240917.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:57.692Z,1513240917.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:58.015Z,1513240918.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:58.036Z,1513240918.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:58.415Z,1513240918.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:58.471Z,1513240918.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:58.857Z,1513240918.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:58.873Z,1513240918.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:59.219Z,1513240919.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:59.239Z,1513240919.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:41:59.610Z,1513240919.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:41:59.632Z,1513240919.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:00.027Z,1513240920.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:00.042Z,1513240920.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:00.491Z,1513240920.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:00.544Z,1513240920.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:00.814Z,1513240920.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:00.844Z,1513240920.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:01.232Z,1513240921.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:01.247Z,1513240921.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:01.608Z,1513240921.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:01.622Z,1513240921.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:02.013Z,1513240922.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:02.027Z,1513240922.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:02.405Z,1513240922.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:02.424Z,1513240922.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:02.830Z,1513240922.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:02.860Z,1513240922.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:03.217Z,1513240923.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:03.231Z,1513240923.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:03.615Z,1513240923.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:03.635Z,1513240923.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:04.007Z,1513240924.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:04.038Z,1513240924.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:04.408Z,1513240924.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:04.423Z,1513240924.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:04.810Z,1513240924.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:04.826Z,1513240924.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:05.214Z,1513240925.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:05.229Z,1513240925.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:05.677Z,1513240925.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:05.750Z,1513240925.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:06.021Z,1513240926.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:06.036Z,1513240926.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:06.425Z,1513240926.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:06.472Z,1513240926.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:06.869Z,1513240926.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:06.940Z,1513240926.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:07.206Z,1513240927.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:07.226Z,1513240927.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:07.607Z,1513240927.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:07.635Z,1513240927.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:08.019Z,1513240928.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:08.034Z,1513240928.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:08.418Z,1513240928.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:08.432Z,1513240928.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:08.835Z,1513240928.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:08.868Z,1513240928.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:09.221Z,1513240929.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:09.243Z,1513240929.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:09.622Z,1513240929.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:09.640Z,1513240929.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:10.030Z,1513240930.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:10.069Z,1513240930.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:10.427Z,1513240930.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:10.488Z,1513240930.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:10.861Z,1513240930.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:10.896Z,1513240930.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:11.213Z,1513240931.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:11.240Z,1513240931.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:11.616Z,1513240931.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:11.639Z,1513240931.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:12.034Z,1513240932.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:12.049Z,1513240932.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:12.427Z,1513240932.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:12.448Z,1513240932.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:12.884Z,1513240932.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:12.923Z,1513240932.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:13.259Z,1513240933.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:13.303Z,1513240933.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:13.604Z,1513240933.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:13.635Z,1513240933.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:14.008Z,1513240934.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:14.055Z,1513240934.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:14.411Z,1513240934.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:14.471Z,1513240934.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:14.825Z,1513240934.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:14.844Z,1513240934.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:15.226Z,1513240935.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:15.242Z,1513240935.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:15.627Z,1513240935.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:15.647Z,1513240935.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:16.015Z,1513240936.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:16.031Z,1513240936.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:16.506Z,1513240936.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:16.574Z,1513240936.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:16.815Z,1513240936.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:16.846Z,1513240936.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:17.212Z,1513240937.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:17.227Z,1513240937.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:17.615Z,1513240937.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:17.631Z,1513240937.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:18.025Z,1513240938.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:18.059Z,1513240938.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:18.419Z,1513240938.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:18.498Z,1513240938.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:18.828Z,1513240938.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:18.983Z,1513240938.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:19.217Z,1513240939.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:19.272Z,1513240939.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:19.610Z,1513240939.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:19.638Z,1513240939.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:20.004Z,1513240940.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:20.043Z,1513240940.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:20.404Z,1513240940.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:20.519Z,1513240940.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:20.830Z,1513240940.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:20.845Z,1513240940.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:21.226Z,1513240941.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:21.279Z,1513240941.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:21.627Z,1513240941.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:21.643Z,1513240941.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:22.000Z,1513240942.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:22.031Z,1513240942.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:22.403Z,1513240942.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:22.434Z,1513240942.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:22.844Z,1513240942.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:22.876Z,1513240942.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:23.220Z,1513240943.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:23.252Z,1513240943.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:23.610Z,1513240943.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:23.626Z,1513240943.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:24.022Z,1513240944.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:24.052Z,1513240944.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:27.502Z,1513240947.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:27.517Z,1513240947.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:27.631Z,1513240947.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:27.656Z,1513240947.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:27.975Z,1513240947.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:28.007Z,1513240948.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:28.380Z,1513240948.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:28.407Z,1513240948.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:28.781Z,1513240948.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:28.796Z,1513240948.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:29.228Z,1513240949.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:29.256Z,1513240949.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:29.584Z,1513240949.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:29.632Z,1513240949.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:29.988Z,1513240949.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:30.007Z,1513240950.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:30.394Z,1513240950.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:30.509Z,1513240950.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:30.793Z,1513240950.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:30.815Z,1513240950.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:31.186Z,1513240951.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:31.201Z,1513240951.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:31.587Z,1513240951.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:31.602Z,1513240951.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:31.988Z,1513240951.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:32.003Z,1513240952.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:32.402Z,1513240952.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:32.502Z,1513240952.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:32.785Z,1513240952.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:32.816Z,1513240952.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:33.197Z,1513240953.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:33.227Z,1513240953.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:33.583Z,1513240953.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:33.619Z,1513240953.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:33.982Z,1513240953.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:33.998Z,1513240953.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:34.380Z,1513240954.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:34.394Z,1513240954.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:34.793Z,1513240954.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:34.816Z,1513240954.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:35.188Z,1513240955.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:35.203Z,1513240955.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:35.593Z,1513240955.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:35.608Z,1513240955.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:36.007Z,1513240956.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:36.027Z,1513240956.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:36.409Z,1513240956.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:36.431Z,1513240956.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:36.806Z,1513240956.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:36.847Z,1513240956.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:37.187Z,1513240957.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:37.207Z,1513240957.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:37.588Z,1513240957.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:37.607Z,1513240957.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:37.991Z,1513240957.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:38.005Z,1513240958.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:38.390Z,1513240958.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:38.411Z,1513240958.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:38.828Z,1513240958.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:38.871Z,1513240958.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:39.211Z,1513240959.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:39.231Z,1513240959.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:39.598Z,1513240959.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:39.613Z,1513240959.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:39.979Z,1513240959.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:40.005Z,1513240960.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:40.384Z,1513240960.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:40.423Z,1513240960.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:40.838Z,1513240960.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:40.931Z,1513240960.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:41.180Z,1513240961.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:41.208Z,1513240961.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:41.593Z,1513240961.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:41.609Z,1513240961.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:41.986Z,1513240961.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:42.064Z,1513240962.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:42.393Z,1513240962.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:42.419Z,1513240962.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:42.802Z,1513240962.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:42.882Z,1513240962.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:43.184Z,1513240963.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:43.211Z,1513240963.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:43.587Z,1513240963.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:43.633Z,1513240963.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:43.990Z,1513240963.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:44.012Z,1513240964.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:44.376Z,1513240964.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:44.399Z,1513240964.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:44.791Z,1513240964.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:44.812Z,1513240964.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:45.203Z,1513240965.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:45.267Z,1513240965.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:45.595Z,1513240965.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:45.611Z,1513240965.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:45.983Z,1513240965.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:46.010Z,1513240966.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:46.379Z,1513240966.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:46.406Z,1513240966.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:46.775Z,1513240966.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:46.810Z,1513240966.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:47.190Z,1513240967.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:47.204Z,1513240967.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:47.586Z,1513240967.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:47.609Z,1513240967.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:47.996Z,1513240967.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:48.011Z,1513240968.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:48.423Z,1513240968.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:48.501Z,1513240968.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:48.790Z,1513240968.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:48.812Z,1513240968.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:49.182Z,1513240969.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:49.209Z,1513240969.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:49.583Z,1513240969.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:49.597Z,1513240969.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:49.981Z,1513240969.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:49.996Z,1513240969.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:50.384Z,1513240970.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:50.399Z,1513240970.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:50.798Z,1513240970.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:50.828Z,1513240970.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:51.193Z,1513240971.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:51.270Z,1513240971.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:51.586Z,1513240971.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:51.600Z,1513240971.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:51.984Z,1513240971.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:52.037Z,1513240972.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:52.390Z,1513240972.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:52.405Z,1513240972.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:52.840Z,1513240972.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:52.863Z,1513240972.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:53.182Z,1513240973.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:53.196Z,1513240973.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:53.583Z,1513240973.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:53.597Z,1513240973.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:53.994Z,1513240973.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:54.024Z,1513240974.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:54.393Z,1513240974.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:54.407Z,1513240974.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:54.883Z,1513240974.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:54.939Z,1513240974.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:55.181Z,1513240975.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:55.210Z,1513240975.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:55.590Z,1513240975.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:55.611Z,1513240975.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:55.992Z,1513240975.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:56.007Z,1513240976.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:56.383Z,1513240976.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:56.407Z,1513240976.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:56.786Z,1513240976.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:56.822Z,1513240976.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:57.194Z,1513240977.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:57.227Z,1513240977.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:57.594Z,1513240977.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:57.626Z,1513240977.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:57.982Z,1513240977.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:57.996Z,1513240977.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:58.375Z,1513240978.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:58.403Z,1513240978.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:58.782Z,1513240978.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:58.816Z,1513240978.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:59.184Z,1513240979.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:59.219Z,1513240979.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:59.579Z,1513240979.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:42:59.612Z,1513240979.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:42:59.994Z,1513240979.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:00.014Z,1513240980.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:00.407Z,1513240980.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:00.428Z,1513240980.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:00.801Z,1513240980.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:00.838Z,1513240980.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:01.226Z,1513240981.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:01.250Z,1513240981.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:01.583Z,1513240981.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:01.599Z,1513240981.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:01.976Z,1513240981.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:02.033Z,1513240982.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:02.379Z,1513240982.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:02.399Z,1513240982.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:02.801Z,1513240982.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:02.844Z,1513240982.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:03.201Z,1513240983.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:03.216Z,1513240983.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:03.591Z,1513240983.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:03.611Z,1513240983.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:03.987Z,1513240983.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:04.086Z,1513240984.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:04.386Z,1513240984.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:04.425Z,1513240984.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:04.783Z,1513240984.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:04.803Z,1513240984.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:05.185Z,1513240985.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:05.239Z,1513240985.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:05.585Z,1513240985.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:05.599Z,1513240985.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:05.998Z,1513240985.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:06.054Z,1513240986.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:06.398Z,1513240986.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:06.412Z,1513240986.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:06.837Z,1513240986.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:06.884Z,1513240986.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:07.188Z,1513240987.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:07.203Z,1513240987.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:07.590Z,1513240987.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:07.604Z,1513240987.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:07.992Z,1513240987.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:08.007Z,1513240988.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:08.383Z,1513240988.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:08.403Z,1513240988.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:08.841Z,1513240988.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:08.860Z,1513240988.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:09.199Z,1513240989.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:09.214Z,1513240989.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:09.586Z,1513240989.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:09.612Z,1513240989.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:09.987Z,1513240989.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:10.019Z,1513240990.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:10.370Z,1513240990.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:10.384Z,1513240990.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:10.786Z,1513240990.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:10.829Z,1513240990.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:11.185Z,1513240991.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:11.200Z,1513240991.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:11.584Z,1513240991.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:11.603Z,1513240991.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:11.996Z,1513240991.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:12.011Z,1513240992.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:12.397Z,1513240992.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:12.411Z,1513240992.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:12.797Z,1513240992.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:12.823Z,1513240992.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:13.179Z,1513240993.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:13.212Z,1513240993.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:13.583Z,1513240993.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:13.609Z,1513240993.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:14.011Z,1513240994.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:14.039Z,1513240994.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:14.385Z,1513240994.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:14.478Z,1513240994.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:14.796Z,1513240994.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:14.830Z,1513240994.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:15.193Z,1513240995.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:15.208Z,1513240995.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:15.593Z,1513240995.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:15.608Z,1513240995.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:15.986Z,1513240995.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:16.001Z,1513240996.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:16.387Z,1513240996.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:16.401Z,1513240996.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:16.775Z,1513240996.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:16.807Z,1513240996.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:17.231Z,1513240997.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:17.262Z,1513240997.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:17.586Z,1513240997.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:17.600Z,1513240997.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:17.994Z,1513240997.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:18.020Z,1513240998.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:18.409Z,1513240998.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:18.424Z,1513240998.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:18.789Z,1513240998.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:18.812Z,1513240998.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:19.186Z,1513240999.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:19.201Z,1513240999.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:19.585Z,1513240999.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:19.600Z,1513240999.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:19.986Z,1513240999.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:20.001Z,1513241000.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:20.391Z,1513241000.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:20.435Z,1513241000.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:20.840Z,1513241000.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:20.891Z,1513241000.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:21.203Z,1513241001.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:21.219Z,1513241001.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:21.599Z,1513241001.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:21.614Z,1513241001.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:21.983Z,1513241001.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:22.015Z,1513241002.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:22.383Z,1513241002.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:22.419Z,1513241002.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:22.806Z,1513241002.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:22.869Z,1513241002.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:23.188Z,1513241003.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:23.204Z,1513241003.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:23.629Z,1513241003.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:23.682Z,1513241003.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:23.998Z,1513241003.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:24.033Z,1513241004.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:24.397Z,1513241004.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:24.456Z,1513241004.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:27.846Z,1513241007.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:27.942Z,1513241007.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:28.023Z,1513241008.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:28.056Z,1513241008.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:28.412Z,1513241008.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:28.427Z,1513241008.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:28.811Z,1513241008.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:28.878Z,1513241008.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:29.207Z,1513241009.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:29.229Z,1513241009.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:29.611Z,1513241009.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:29.663Z,1513241009.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:30.028Z,1513241010.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:30.068Z,1513241010.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:30.426Z,1513241010.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:30.520Z,1513241010.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:30.827Z,1513241010.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:30.842Z,1513241010.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:31.224Z,1513241011.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:31.240Z,1513241011.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:31.603Z,1513241011.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:31.635Z,1513241011.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:32.007Z,1513241012.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:32.037Z,1513241012.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:32.406Z,1513241012.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:32.440Z,1513241012.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:32.814Z,1513241012.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:32.841Z,1513241012.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:33.247Z,1513241013.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:33.267Z,1513241013.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:33.621Z,1513241013.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:33.646Z,1513241013.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:34.011Z,1513241014.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:34.048Z,1513241014.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:34.407Z,1513241014.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:34.427Z,1513241014.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:34.870Z,1513241014.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:34.921Z,1513241014.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:35.213Z,1513241015.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:35.229Z,1513241015.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:35.625Z,1513241015.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:35.659Z,1513241015.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:36.010Z,1513241016.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:36.037Z,1513241016.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:36.430Z,1513241016.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:36.458Z,1513241016.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:36.880Z,1513241016.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:36.916Z,1513241016.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:37.220Z,1513241017.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:37.235Z,1513241017.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:37.626Z,1513241017.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:37.647Z,1513241017.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:38.025Z,1513241018.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:38.073Z,1513241018.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:38.426Z,1513241018.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:38.512Z,1513241018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:38.807Z,1513241018.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:38.840Z,1513241018.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:39.212Z,1513241019.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:39.240Z,1513241019.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:39.616Z,1513241019.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:39.659Z,1513241019.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:40.013Z,1513241020.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:40.044Z,1513241020.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:40.426Z,1513241020.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:40.532Z,1513241020.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:40.827Z,1513241020.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:40.841Z,1513241020.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:41.204Z,1513241021.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:41.239Z,1513241021.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:41.603Z,1513241021.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:41.636Z,1513241021.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:42.007Z,1513241022.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:42.042Z,1513241022.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:42.407Z,1513241022.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:42.490Z,1513241022.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:42.831Z,1513241022.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:42.872Z,1513241022.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:43.227Z,1513241023.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:43.247Z,1513241023.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:43.627Z,1513241023.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:43.687Z,1513241023.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:44.007Z,1513241024.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:44.039Z,1513241024.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:44.400Z,1513241024.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:44.483Z,1513241024.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:44.807Z,1513241024.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:44.843Z,1513241024.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:45.210Z,1513241025.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:45.231Z,1513241025.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:45.613Z,1513241025.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:45.627Z,1513241025.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:46.029Z,1513241026.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:46.066Z,1513241026.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:46.434Z,1513241026.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:46.463Z,1513241026.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:46.822Z,1513241026.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:46.844Z,1513241026.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:47.207Z,1513241027.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:47.232Z,1513241027.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:47.603Z,1513241027.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:47.628Z,1513241027.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:48.005Z,1513241028.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:48.039Z,1513241028.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:48.408Z,1513241028.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:48.435Z,1513241028.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:48.872Z,1513241028.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:48.947Z,1513241028.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:49.247Z,1513241029.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:49.299Z,1513241029.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:49.622Z,1513241029.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:49.636Z,1513241029.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.003Z,1513241030.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:50.048Z,1513241030.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.049Z,1513241030.049 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.049Z,1513241030.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 164
2017-12-14T08:43:50.049Z,1513241030.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:43:50.051Z,1513241030.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.051Z,1513241030.051 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2017-12-14T08:43:50.052Z,1513241030.052 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:43:50.092Z,1513241030.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:43:50.092Z,1513241030.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:43:50.403Z,1513241030.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:50.430Z,1513241030.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.454Z,1513241030.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:43:50.454Z,1513241030.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 164
2017-12-14T08:43:50.454Z,1513241030.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:43:50.454Z,1513241030.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2017-12-14T08:43:50.866Z,1513241030.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:50.939Z,1513241030.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:50.939Z,1513241030.939 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164
2017-12-14T08:43:50.939Z,1513241030.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:43:50.940Z,1513241030.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:43:50.940Z,1513241030.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:43:50.946Z,1513241030.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:43:50.946Z,1513241030.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:43:50.946Z,1513241030.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:43:50.947Z,1513241030.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:43:50.979Z,1513241030.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:43:51.211Z,1513241031.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:51.264Z,1513241031.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:43:51.264Z,1513241031.264 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164
2017-12-14T08:43:51.621Z,1513241031.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:51.674Z,1513241031.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:43:51.674Z,1513241031.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:43:51.674Z,1513241031.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:43:52.021Z,1513241032.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:52.036Z,1513241032.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:52.460Z,1513241032.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:52.532Z,1513241032.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:52.803Z,1513241032.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:52.833Z,1513241032.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:53.204Z,1513241033.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:53.243Z,1513241033.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:53.603Z,1513241033.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:53.640Z,1513241033.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:54.013Z,1513241034.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:54.049Z,1513241034.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:54.428Z,1513241034.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:54.527Z,1513241034.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:54.813Z,1513241034.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:54.842Z,1513241034.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:55.204Z,1513241035.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:55.218Z,1513241035.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:55.608Z,1513241035.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:55.643Z,1513241035.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:56.013Z,1513241036.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:56.028Z,1513241036.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:56.404Z,1513241036.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:56.419Z,1513241036.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:56.820Z,1513241036.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:56.839Z,1513241036.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:57.233Z,1513241037.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:57.251Z,1513241037.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:57.619Z,1513241037.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:57.633Z,1513241037.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:58.004Z,1513241038.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:58.052Z,1513241038.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:58.403Z,1513241038.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:58.427Z,1513241038.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:58.859Z,1513241038.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:58.915Z,1513241038.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:59.210Z,1513241039.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:59.241Z,1513241039.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:59.594Z,1513241039.594 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:43:59.594Z,1513241039.594 [NAL9602] Data Fault, FailCount= 5
2017-12-14T08:43:59.594Z,1513241039.594 [NAL9602](ERROR): Data Fault
2017-12-14T08:43:59.610Z,1513241039.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:43:59.625Z,1513241039.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:43:59.670Z,1513241039.670 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:43:59.670Z,1513241039.670 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T08:43:59.988Z,1513241039.988 [NAL9602](INFO): Powering down
2017-12-14T08:44:00.006Z,1513241040.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:00.063Z,1513241040.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:00.097Z,1513241040.097 [CBIT](INFO): Critical error at 20171214T084359
2017-12-14T08:44:00.406Z,1513241040.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:00.429Z,1513241040.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:00.811Z,1513241040.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:00.831Z,1513241040.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:01.214Z,1513241041.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:01.229Z,1513241041.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:01.615Z,1513241041.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:01.630Z,1513241041.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:02.037Z,1513241042.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:02.069Z,1513241042.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:02.411Z,1513241042.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:02.426Z,1513241042.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:02.867Z,1513241042.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:02.910Z,1513241042.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:03.214Z,1513241043.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:03.229Z,1513241043.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:03.612Z,1513241043.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:03.626Z,1513241043.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:04.017Z,1513241044.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:04.032Z,1513241044.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:04.062Z,1513241044.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:04.412Z,1513241044.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:04.434Z,1513241044.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:04.858Z,1513241044.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:04.871Z,1513241044.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:04.896Z,1513241044.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:05.240Z,1513241045.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:05.261Z,1513241045.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:05.282Z,1513241045.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:05.602Z,1513241045.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:05.639Z,1513241045.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:05.996Z,1513241045.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:06.022Z,1513241046.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:06.059Z,1513241046.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:06.401Z,1513241046.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:06.504Z,1513241046.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:06.803Z,1513241046.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:06.835Z,1513241046.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:06.853Z,1513241046.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:07.203Z,1513241047.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:07.234Z,1513241047.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:07.257Z,1513241047.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:07.602Z,1513241047.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:07.640Z,1513241047.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:08.002Z,1513241048.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:08.038Z,1513241048.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:08.054Z,1513241048.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:08.505Z,1513241048.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:08.536Z,1513241048.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:08.812Z,1513241048.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:08.827Z,1513241048.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:08.850Z,1513241048.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:09.208Z,1513241049.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:09.223Z,1513241049.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:09.610Z,1513241049.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:09.624Z,1513241049.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:09.646Z,1513241049.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:10.008Z,1513241050.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:10.028Z,1513241050.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:10.442Z,1513241050.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:10.459Z,1513241050.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:10.532Z,1513241050.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:10.815Z,1513241050.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:10.847Z,1513241050.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:10.849Z,1513241050.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:11.214Z,1513241051.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:11.234Z,1513241051.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:11.254Z,1513241051.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:11.616Z,1513241051.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:11.676Z,1513241051.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:12.002Z,1513241052.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:12.017Z,1513241052.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:12.049Z,1513241052.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:12.402Z,1513241052.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:12.517Z,1513241052.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:12.811Z,1513241052.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:12.825Z,1513241052.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:12.847Z,1513241052.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:13.212Z,1513241053.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:13.249Z,1513241053.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:13.252Z,1513241053.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:13.614Z,1513241053.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:13.629Z,1513241053.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:14.013Z,1513241054.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:14.027Z,1513241054.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:14.046Z,1513241054.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:14.405Z,1513241054.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:14.420Z,1513241054.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:14.832Z,1513241054.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:14.842Z,1513241054.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:14.899Z,1513241054.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:15.212Z,1513241055.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:15.231Z,1513241055.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:15.245Z,1513241055.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:15.615Z,1513241055.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:15.629Z,1513241055.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:16.002Z,1513241056.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:16.028Z,1513241056.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:16.416Z,1513241056.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:16.431Z,1513241056.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:16.864Z,1513241056.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:16.887Z,1513241056.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:17.216Z,1513241057.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:17.230Z,1513241057.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:17.612Z,1513241057.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:17.627Z,1513241057.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:17.983Z,1513241057.983 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T08:44:17.983Z,1513241057.983 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T08:44:17.983Z,1513241057.983 [DropWeight](ERROR): Hardware Fault
2017-12-14T08:44:17.000Z,1513241058.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:18.055Z,1513241058.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:18.069Z,1513241058.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:18.082Z,1513241058.082 [CBIT](INFO): Critical error at 20171214T084417
2017-12-14T08:44:18.085Z,1513241058.085 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T08:44:18.085Z,1513241058.085 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T08:44:18.412Z,1513241058.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:18.427Z,1513241058.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:18.439Z,1513241058.439 [CBIT](INFO): Critical error at 20171214T084418
2017-12-14T08:44:18.862Z,1513241058.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:18.866Z,1513241058.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:18.883Z,1513241058.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:19.209Z,1513241059.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:19.224Z,1513241059.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:19.281Z,1513241059.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:19.599Z,1513241059.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:19.631Z,1513241059.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:20.013Z,1513241060.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:20.027Z,1513241060.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:20.078Z,1513241060.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:20.400Z,1513241060.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:20.425Z,1513241060.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:20.803Z,1513241060.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:20.829Z,1513241060.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:20.873Z,1513241060.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:21.243Z,1513241061.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:21.278Z,1513241061.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:21.295Z,1513241061.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:21.602Z,1513241061.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:21.635Z,1513241061.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:22.006Z,1513241062.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:22.031Z,1513241062.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:22.074Z,1513241062.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:22.402Z,1513241062.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:22.503Z,1513241062.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:22.810Z,1513241062.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:22.824Z,1513241062.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:22.869Z,1513241062.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:23.204Z,1513241063.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:23.219Z,1513241063.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:23.273Z,1513241063.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:23.607Z,1513241063.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:23.622Z,1513241063.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:23.625Z,1513241063.625 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:44:23.626Z,1513241063.626 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:44:23.626Z,1513241063.626 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:44:23.626Z,1513241063.626 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:44:24.006Z,1513241064.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:24.020Z,1513241064.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:24.024Z,1513241064.024 [Default:CheckIn:D] Stopped
2017-12-14T08:44:24.024Z,1513241064.024 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:44:24.070Z,1513241064.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:24.409Z,1513241064.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:24.510Z,1513241064.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:24.530Z,1513241064.530 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 491.143880 min 
2017-12-14T08:44:24.530Z,1513241064.530 [Default:CheckIn:E] Stopped
2017-12-14T08:44:24.530Z,1513241064.530 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn] Stopped
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn](INFO): Running loop #48
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn] Running Loop=48
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:44:24.531Z,1513241064.531 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:44:24.865Z,1513241064.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:25.269Z,1513241065.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:26.065Z,1513241066.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:26.861Z,1513241066.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:27.265Z,1513241067.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:27.851Z,1513241067.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:27.889Z,1513241067.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:27.978Z,1513241067.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:27.993Z,1513241067.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:28.062Z,1513241068.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:28.368Z,1513241068.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:28.388Z,1513241068.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:28.780Z,1513241068.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:28.795Z,1513241068.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:28.859Z,1513241068.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:29.180Z,1513241069.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:29.195Z,1513241069.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:29.261Z,1513241069.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:29.572Z,1513241069.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:29.587Z,1513241069.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:29.970Z,1513241069.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:29.988Z,1513241069.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:30.059Z,1513241070.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:30.370Z,1513241070.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:30.385Z,1513241070.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:30.824Z,1513241070.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:30.854Z,1513241070.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:30.927Z,1513241070.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:31.166Z,1513241071.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:31.192Z,1513241071.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:31.257Z,1513241071.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:31.563Z,1513241071.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:31.619Z,1513241071.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:31.963Z,1513241071.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:31.994Z,1513241071.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:32.053Z,1513241072.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:32.366Z,1513241072.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:32.393Z,1513241072.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:32.763Z,1513241072.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:32.839Z,1513241072.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:32.850Z,1513241072.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:33.169Z,1513241073.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:33.184Z,1513241073.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:33.253Z,1513241073.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:33.569Z,1513241073.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:33.634Z,1513241073.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:33.970Z,1513241073.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:33.985Z,1513241073.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:34.050Z,1513241074.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:34.376Z,1513241074.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:34.391Z,1513241074.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:34.766Z,1513241074.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:34.815Z,1513241074.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:34.845Z,1513241074.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:35.162Z,1513241075.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:35.193Z,1513241075.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:35.249Z,1513241075.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:35.570Z,1513241075.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:35.641Z,1513241075.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:35.986Z,1513241075.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:36.000Z,1513241076.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:36.046Z,1513241076.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:36.361Z,1513241076.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:36.376Z,1513241076.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:36.770Z,1513241076.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:36.807Z,1513241076.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:36.841Z,1513241076.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:37.224Z,1513241077.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:37.245Z,1513241077.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:37.260Z,1513241077.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:37.562Z,1513241077.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:37.587Z,1513241077.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:37.970Z,1513241077.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:37.993Z,1513241077.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:38.042Z,1513241078.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:38.360Z,1513241078.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:38.393Z,1513241078.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:38.771Z,1513241078.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:38.786Z,1513241078.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:38.837Z,1513241078.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:39.175Z,1513241079.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:39.190Z,1513241079.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:39.241Z,1513241079.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:39.569Z,1513241079.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:39.583Z,1513241079.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:39.968Z,1513241079.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:39.983Z,1513241079.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:40.038Z,1513241080.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:40.424Z,1513241080.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:40.512Z,1513241080.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:40.763Z,1513241080.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:40.797Z,1513241080.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:40.833Z,1513241080.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:41.163Z,1513241081.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:41.194Z,1513241081.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:41.237Z,1513241081.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:41.562Z,1513241081.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:41.600Z,1513241081.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:41.970Z,1513241081.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:41.984Z,1513241081.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:42.033Z,1513241082.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:42.368Z,1513241082.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:42.383Z,1513241082.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:42.778Z,1513241082.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:42.809Z,1513241082.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:42.830Z,1513241082.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:43.168Z,1513241083.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:43.183Z,1513241083.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:43.233Z,1513241083.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:43.570Z,1513241083.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:43.584Z,1513241083.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:43.971Z,1513241083.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:44.027Z,1513241084.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:44.030Z,1513241084.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:44.369Z,1513241084.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:44.383Z,1513241084.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:44.770Z,1513241084.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:44.827Z,1513241084.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:44.863Z,1513241084.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:45.178Z,1513241085.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:45.193Z,1513241085.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:45.245Z,1513241085.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:45.571Z,1513241085.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:45.586Z,1513241085.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:45.968Z,1513241085.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:45.990Z,1513241085.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:46.042Z,1513241086.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:46.368Z,1513241086.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:46.388Z,1513241086.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:46.838Z,1513241086.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:46.863Z,1513241086.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:46.912Z,1513241086.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:47.173Z,1513241087.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:47.188Z,1513241087.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:47.253Z,1513241087.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:47.574Z,1513241087.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:47.589Z,1513241087.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:47.969Z,1513241087.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:47.984Z,1513241087.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:48.049Z,1513241088.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:48.370Z,1513241088.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:48.386Z,1513241088.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:48.774Z,1513241088.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:48.838Z,1513241088.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:48.846Z,1513241088.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:49.174Z,1513241089.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:49.189Z,1513241089.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:49.249Z,1513241089.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:49.563Z,1513241089.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:49.590Z,1513241089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:49.973Z,1513241089.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:49.999Z,1513241089.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:50.046Z,1513241090.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:50.367Z,1513241090.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:50.397Z,1513241090.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:50.766Z,1513241090.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:50.795Z,1513241090.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:50.841Z,1513241090.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:51.170Z,1513241091.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:51.202Z,1513241091.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:51.245Z,1513241091.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:51.571Z,1513241091.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:51.608Z,1513241091.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:51.966Z,1513241091.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:51.982Z,1513241091.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:52.042Z,1513241092.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:52.366Z,1513241092.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:52.381Z,1513241092.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:52.813Z,1513241092.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:52.827Z,1513241092.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:52.837Z,1513241092.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:53.197Z,1513241093.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:53.231Z,1513241093.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:53.242Z,1513241093.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:53.575Z,1513241093.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:53.589Z,1513241093.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:53.972Z,1513241093.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:53.986Z,1513241093.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:54.038Z,1513241094.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:54.372Z,1513241094.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:54.387Z,1513241094.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:54.773Z,1513241094.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:54.808Z,1513241094.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:54.833Z,1513241094.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:55.178Z,1513241095.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:55.193Z,1513241095.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:55.237Z,1513241095.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:55.562Z,1513241095.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:55.627Z,1513241095.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:55.962Z,1513241095.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:55.987Z,1513241095.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:56.034Z,1513241096.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:56.416Z,1513241096.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:56.460Z,1513241096.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:56.771Z,1513241096.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:56.786Z,1513241096.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:56.830Z,1513241096.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:57.167Z,1513241097.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:57.183Z,1513241097.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:57.233Z,1513241097.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:57.567Z,1513241097.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:57.587Z,1513241097.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:57.970Z,1513241097.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:57.984Z,1513241097.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:58.030Z,1513241098.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:58.370Z,1513241098.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:58.384Z,1513241098.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:58.770Z,1513241098.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:58.827Z,1513241098.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:58.871Z,1513241098.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:59.175Z,1513241099.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:59.190Z,1513241099.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:59.233Z,1513241099.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:59.571Z,1513241099.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:59.588Z,1513241099.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:44:59.973Z,1513241099.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:44:59.988Z,1513241099.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:00.030Z,1513241100.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:00.360Z,1513241100.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:00.391Z,1513241100.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:00.761Z,1513241100.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:00.827Z,1513241100.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:00.848Z,1513241100.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:01.172Z,1513241101.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:01.201Z,1513241101.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:01.241Z,1513241101.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:01.564Z,1513241101.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:01.579Z,1513241101.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:01.962Z,1513241101.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:01.978Z,1513241101.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:02.037Z,1513241102.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:02.370Z,1513241102.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:02.384Z,1513241102.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:02.822Z,1513241102.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:02.834Z,1513241102.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:02.848Z,1513241102.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:03.175Z,1513241103.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:03.195Z,1513241103.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:03.237Z,1513241103.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:03.564Z,1513241103.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:03.578Z,1513241103.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:03.984Z,1513241103.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:04.006Z,1513241104.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:04.034Z,1513241104.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:04.371Z,1513241104.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:04.386Z,1513241104.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:04.766Z,1513241104.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:04.816Z,1513241104.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:04.829Z,1513241104.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:05.162Z,1513241105.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:05.193Z,1513241105.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:05.233Z,1513241105.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:05.561Z,1513241105.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:05.575Z,1513241105.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:06.009Z,1513241106.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:06.038Z,1513241106.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:06.049Z,1513241106.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:06.367Z,1513241106.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:06.402Z,1513241106.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:06.772Z,1513241106.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:06.795Z,1513241106.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:06.833Z,1513241106.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:07.170Z,1513241107.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:07.186Z,1513241107.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:07.237Z,1513241107.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:07.572Z,1513241107.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:07.587Z,1513241107.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:07.971Z,1513241107.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:07.986Z,1513241107.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:08.034Z,1513241108.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:08.376Z,1513241108.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:08.391Z,1513241108.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:08.767Z,1513241108.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:08.802Z,1513241108.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:08.829Z,1513241108.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:09.200Z,1513241109.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:09.233Z,1513241109.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:09.244Z,1513241109.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:09.562Z,1513241109.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:09.601Z,1513241109.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:09.960Z,1513241109.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:09.975Z,1513241109.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:10.030Z,1513241110.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:10.362Z,1513241110.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:10.376Z,1513241110.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:10.773Z,1513241110.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:10.801Z,1513241110.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:10.825Z,1513241110.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:11.164Z,1513241111.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:11.179Z,1513241111.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:11.229Z,1513241111.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:11.570Z,1513241111.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:11.586Z,1513241111.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:11.971Z,1513241111.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:11.986Z,1513241111.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:12.026Z,1513241112.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:12.426Z,1513241112.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:12.462Z,1513241112.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:12.784Z,1513241112.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:12.823Z,1513241112.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:12.874Z,1513241112.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:13.179Z,1513241113.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:13.194Z,1513241113.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:13.253Z,1513241113.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:13.571Z,1513241113.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:13.586Z,1513241113.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:13.983Z,1513241113.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:13.999Z,1513241113.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:14.049Z,1513241114.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:14.371Z,1513241114.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:14.386Z,1513241114.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:14.770Z,1513241114.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:14.846Z,1513241114.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:14.907Z,1513241114.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:15.162Z,1513241115.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:15.198Z,1513241115.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:15.249Z,1513241115.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:15.606Z,1513241115.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:15.619Z,1513241115.619 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T08:45:15.619Z,1513241115.619 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:45:15.619Z,1513241115.619 [BPC1](ERROR): Data Fault
2017-12-14T08:45:15.652Z,1513241115.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:15.700Z,1513241115.700 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:45:15.971Z,1513241115.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:15.986Z,1513241115.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:16.046Z,1513241116.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:16.369Z,1513241116.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:16.384Z,1513241116.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:16.766Z,1513241116.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:16.800Z,1513241116.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:16.815Z,1513241116.815 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:45:16.815Z,1513241116.815 [BPC1] No Fault, FailCount= 1
2017-12-14T08:45:16.841Z,1513241116.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:17.163Z,1513241117.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:17.243Z,1513241117.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:17.245Z,1513241117.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:17.562Z,1513241117.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:17.587Z,1513241117.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:17.962Z,1513241117.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:18.042Z,1513241118.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:18.110Z,1513241118.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:18.356Z,1513241118.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:18.384Z,1513241118.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:18.766Z,1513241118.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:18.837Z,1513241118.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:18.843Z,1513241118.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:19.166Z,1513241119.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:19.191Z,1513241119.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:19.241Z,1513241119.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:19.563Z,1513241119.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:19.590Z,1513241119.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:19.962Z,1513241119.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:19.976Z,1513241119.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:20.038Z,1513241120.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:20.365Z,1513241120.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:20.395Z,1513241120.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:20.772Z,1513241120.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:20.787Z,1513241120.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:20.833Z,1513241120.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:21.168Z,1513241121.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:21.183Z,1513241121.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:21.237Z,1513241121.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:21.569Z,1513241121.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:21.584Z,1513241121.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:22.010Z,1513241122.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:22.034Z,1513241122.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:22.041Z,1513241122.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:22.372Z,1513241122.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:22.386Z,1513241122.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:22.766Z,1513241122.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:22.801Z,1513241122.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:22.829Z,1513241122.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:23.162Z,1513241123.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:23.177Z,1513241123.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:23.233Z,1513241123.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:23.572Z,1513241123.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:23.586Z,1513241123.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:23.970Z,1513241123.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:23.984Z,1513241123.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:24.031Z,1513241124.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:24.370Z,1513241124.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:24.385Z,1513241124.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:24.774Z,1513241124.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:24.788Z,1513241124.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:24.825Z,1513241124.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:25.230Z,1513241125.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:26.025Z,1513241126.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:26.823Z,1513241126.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:27.241Z,1513241127.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.037Z,1513241128.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.338Z,1513241128.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.431Z,1513241128.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:28.562Z,1513241128.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.595Z,1513241128.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:28.838Z,1513241128.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.923Z,1513241128.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:28.944Z,1513241128.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:29.245Z,1513241129.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:29.322Z,1513241129.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:29.337Z,1513241129.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:29.721Z,1513241129.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:29.736Z,1513241129.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:30.042Z,1513241130.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:30.121Z,1513241130.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:30.136Z,1513241130.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:30.537Z,1513241130.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:30.572Z,1513241130.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:30.837Z,1513241130.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:30.918Z,1513241130.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:30.933Z,1513241130.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:31.241Z,1513241131.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:31.317Z,1513241131.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:31.332Z,1513241131.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:31.717Z,1513241131.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:31.731Z,1513241131.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:32.037Z,1513241132.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:32.115Z,1513241132.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:32.130Z,1513241132.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:32.535Z,1513241132.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:32.577Z,1513241132.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:32.833Z,1513241132.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:32.914Z,1513241132.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:32.937Z,1513241132.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:33.237Z,1513241133.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:33.320Z,1513241133.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:33.335Z,1513241133.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:33.716Z,1513241133.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:33.735Z,1513241133.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:34.033Z,1513241134.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:34.121Z,1513241134.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:34.136Z,1513241134.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:34.537Z,1513241134.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:34.568Z,1513241134.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:34.829Z,1513241134.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:34.918Z,1513241134.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:34.939Z,1513241134.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:35.233Z,1513241135.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:35.322Z,1513241135.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:35.336Z,1513241135.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:35.716Z,1513241135.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:35.731Z,1513241135.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:36.030Z,1513241136.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:36.114Z,1513241136.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:36.141Z,1513241136.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:36.539Z,1513241136.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:36.554Z,1513241136.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:36.825Z,1513241136.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:36.908Z,1513241136.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:36.959Z,1513241136.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:37.229Z,1513241137.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:37.319Z,1513241137.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:37.345Z,1513241137.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:37.710Z,1513241137.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:37.748Z,1513241137.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:38.025Z,1513241138.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:38.117Z,1513241138.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:38.132Z,1513241138.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:38.570Z,1513241138.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:38.610Z,1513241138.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:38.821Z,1513241138.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:38.910Z,1513241138.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:38.971Z,1513241138.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:39.225Z,1513241139.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:39.314Z,1513241139.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:39.367Z,1513241139.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:39.711Z,1513241139.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:39.746Z,1513241139.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:40.024Z,1513241140.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:40.111Z,1513241140.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:40.151Z,1513241140.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:40.514Z,1513241140.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:40.541Z,1513241140.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:40.819Z,1513241140.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:40.958Z,1513241140.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:41.011Z,1513241141.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:41.237Z,1513241141.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:41.330Z,1513241141.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:41.344Z,1513241141.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:41.710Z,1513241141.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:41.742Z,1513241141.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:42.033Z,1513241142.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:42.115Z,1513241142.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:42.145Z,1513241142.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:42.515Z,1513241142.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:42.530Z,1513241142.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:42.841Z,1513241142.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:42.911Z,1513241142.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:42.926Z,1513241142.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:43.319Z,1513241143.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:43.334Z,1513241143.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:43.638Z,1513241143.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:43.739Z,1513241143.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:43.766Z,1513241143.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:44.134Z,1513241144.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:44.135Z,1513241144.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:44.178Z,1513241144.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:44.534Z,1513241144.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:44.577Z,1513241144.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:44.877Z,1513241144.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:44.922Z,1513241144.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:44.937Z,1513241144.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:45.314Z,1513241145.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:45.331Z,1513241145.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:45.673Z,1513241145.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:45.716Z,1513241145.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:45.737Z,1513241145.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:46.121Z,1513241146.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:46.136Z,1513241146.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:46.473Z,1513241146.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:46.539Z,1513241146.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:46.575Z,1513241146.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:46.881Z,1513241146.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:46.930Z,1513241146.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:46.946Z,1513241146.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:47.350Z,1513241147.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:47.413Z,1513241147.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:47.677Z,1513241147.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:47.720Z,1513241147.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:47.736Z,1513241147.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:48.116Z,1513241148.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:48.131Z,1513241148.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:48.475Z,1513241148.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:48.533Z,1513241148.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:48.572Z,1513241148.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:48.881Z,1513241148.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:48.920Z,1513241148.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:48.935Z,1513241148.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:49.322Z,1513241149.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:49.367Z,1513241149.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:49.677Z,1513241149.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:49.726Z,1513241149.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:49.740Z,1513241149.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:50.121Z,1513241150.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:50.137Z,1513241150.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:50.475Z,1513241150.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:50.574Z,1513241150.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:50.624Z,1513241150.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:50.917Z,1513241150.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:50.929Z,1513241150.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:50.943Z,1513241150.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:51.310Z,1513241151.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:51.341Z,1513241151.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:51.714Z,1513241151.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:51.724Z,1513241151.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:51.739Z,1513241151.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:52.118Z,1513241152.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:52.132Z,1513241152.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:52.511Z,1513241152.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:52.577Z,1513241152.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:52.617Z,1513241152.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:52.917Z,1513241152.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:52.932Z,1513241152.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:52.953Z,1513241152.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:53.317Z,1513241153.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:53.331Z,1513241153.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:53.716Z,1513241153.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:53.750Z,1513241153.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:53.763Z,1513241153.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:54.117Z,1513241154.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:54.139Z,1513241154.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:54.518Z,1513241154.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:54.534Z,1513241154.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:54.546Z,1513241154.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:54.917Z,1513241154.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:54.932Z,1513241154.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:55.221Z,1513241155.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:55.317Z,1513241155.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:55.332Z,1513241155.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:55.720Z,1513241155.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:55.735Z,1513241155.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:56.017Z,1513241156.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:56.120Z,1513241156.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:56.135Z,1513241156.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:56.519Z,1513241156.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:56.534Z,1513241156.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:56.816Z,1513241156.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:56.956Z,1513241156.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:57.018Z,1513241157.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:57.229Z,1513241157.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:57.317Z,1513241157.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:57.340Z,1513241157.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:57.718Z,1513241157.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:57.732Z,1513241157.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:58.026Z,1513241158.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:58.117Z,1513241158.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:58.132Z,1513241158.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:58.541Z,1513241158.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:58.571Z,1513241158.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:58.821Z,1513241158.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:58.915Z,1513241158.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:58.938Z,1513241158.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:59.225Z,1513241159.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:59.317Z,1513241159.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:59.333Z,1513241159.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:59.721Z,1513241159.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:45:59.794Z,1513241159.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:45:59.820Z,1513241159.820 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:45:59.825Z,1513241159.825 [NAL9602] No Fault, FailCount= 5
2017-12-14T08:46:00.021Z,1513241160.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:00.130Z,1513241160.130 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:46:00.150Z,1513241160.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:00.188Z,1513241160.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:00.540Z,1513241160.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:00.572Z,1513241160.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:00.817Z,1513241160.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:00.911Z,1513241160.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:00.947Z,1513241160.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:01.221Z,1513241161.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:01.311Z,1513241161.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:01.351Z,1513241161.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:01.711Z,1513241161.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:01.745Z,1513241161.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:02.017Z,1513241162.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:02.105Z,1513241162.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:02.148Z,1513241162.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:02.521Z,1513241162.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:02.561Z,1513241162.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:02.813Z,1513241162.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:02.913Z,1513241162.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:02.940Z,1513241162.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:03.217Z,1513241163.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:03.356Z,1513241163.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:03.396Z,1513241163.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:03.710Z,1513241163.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:03.755Z,1513241163.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:04.014Z,1513241164.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:04.110Z,1513241164.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:04.127Z,1513241164.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:04.521Z,1513241164.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:04.554Z,1513241164.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:04.809Z,1513241164.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:04.911Z,1513241164.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:04.947Z,1513241164.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:05.213Z,1513241165.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:05.316Z,1513241165.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:05.359Z,1513241165.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:05.715Z,1513241165.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:05.730Z,1513241165.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:06.009Z,1513241166.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:06.118Z,1513241166.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:06.133Z,1513241166.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:06.581Z,1513241166.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:06.643Z,1513241166.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:06.805Z,1513241166.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:06.918Z,1513241166.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:06.933Z,1513241166.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:07.209Z,1513241167.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:07.322Z,1513241167.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:07.336Z,1513241167.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:07.722Z,1513241167.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:07.737Z,1513241167.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:08.006Z,1513241168.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:08.111Z,1513241168.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:08.127Z,1513241168.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:08.521Z,1513241168.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:08.535Z,1513241168.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:08.803Z,1513241168.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:08.918Z,1513241168.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:08.932Z,1513241168.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:09.241Z,1513241169.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:09.319Z,1513241169.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:09.334Z,1513241169.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:09.720Z,1513241169.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:09.734Z,1513241169.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:10.038Z,1513241170.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:10.113Z,1513241170.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:10.144Z,1513241170.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:10.518Z,1513241170.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:10.583Z,1513241170.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:10.836Z,1513241170.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:10.938Z,1513241170.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:10.971Z,1513241170.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:11.246Z,1513241171.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:11.294Z,1513241171.294 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:46:11.321Z,1513241171.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:11.340Z,1513241171.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:11.719Z,1513241171.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:11.734Z,1513241171.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:12.042Z,1513241172.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:12.126Z,1513241172.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:12.141Z,1513241172.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:12.543Z,1513241172.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:12.575Z,1513241172.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:12.837Z,1513241172.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:12.956Z,1513241172.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:12.988Z,1513241172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:13.241Z,1513241173.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:13.317Z,1513241173.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:13.344Z,1513241173.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:13.723Z,1513241173.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:13.738Z,1513241173.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:14.038Z,1513241174.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:14.119Z,1513241174.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:14.139Z,1513241174.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:14.557Z,1513241174.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:14.579Z,1513241174.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:14.833Z,1513241174.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:14.932Z,1513241174.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:14.959Z,1513241174.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:15.237Z,1513241175.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:15.328Z,1513241175.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:15.356Z,1513241175.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:15.714Z,1513241175.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:15.740Z,1513241175.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:16.033Z,1513241176.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:16.115Z,1513241176.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:16.154Z,1513241176.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:16.538Z,1513241176.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:16.569Z,1513241176.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:16.829Z,1513241176.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:16.917Z,1513241176.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:16.944Z,1513241176.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:17.233Z,1513241177.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:17.317Z,1513241177.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:17.348Z,1513241177.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:17.727Z,1513241177.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:17.754Z,1513241177.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:18.030Z,1513241178.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:18.126Z,1513241178.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:18.162Z,1513241178.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:18.542Z,1513241178.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:18.570Z,1513241178.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:18.825Z,1513241178.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:18.919Z,1513241178.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:18.957Z,1513241178.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:19.229Z,1513241179.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:19.419Z,1513241179.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:19.474Z,1513241179.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:19.735Z,1513241179.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:19.784Z,1513241179.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:20.034Z,1513241180.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:20.121Z,1513241180.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:20.147Z,1513241180.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:20.583Z,1513241180.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:20.626Z,1513241180.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:20.830Z,1513241180.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:20.949Z,1513241180.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:20.974Z,1513241180.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:21.234Z,1513241181.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:21.349Z,1513241181.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:21.439Z,1513241181.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:21.713Z,1513241181.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:21.752Z,1513241181.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:22.032Z,1513241182.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:22.142Z,1513241182.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:22.173Z,1513241182.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:22.516Z,1513241182.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:22.583Z,1513241182.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:22.831Z,1513241182.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:22.940Z,1513241182.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:23.021Z,1513241183.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:23.261Z,1513241183.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:23.317Z,1513241183.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:23.368Z,1513241183.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:23.723Z,1513241183.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:23.755Z,1513241183.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:24.058Z,1513241184.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:24.137Z,1513241184.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:24.196Z,1513241184.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:24.524Z,1513241184.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:24.559Z,1513241184.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:24.854Z,1513241184.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:24.950Z,1513241184.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:24.969Z,1513241184.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:25.258Z,1513241185.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:26.054Z,1513241186.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:26.849Z,1513241186.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:27.253Z,1513241187.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:28.050Z,1513241188.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:28.847Z,1513241188.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:29.249Z,1513241189.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:29.535Z,1513241189.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:29.566Z,1513241189.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:29.695Z,1513241189.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:29.739Z,1513241189.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:30.046Z,1513241190.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:30.122Z,1513241190.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:30.137Z,1513241190.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:30.578Z,1513241190.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:30.594Z,1513241190.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:30.841Z,1513241190.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:30.930Z,1513241190.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:30.945Z,1513241190.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:31.246Z,1513241191.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:31.299Z,1513241191.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:31.334Z,1513241191.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:31.713Z,1513241191.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:31.748Z,1513241191.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:32.042Z,1513241192.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:32.101Z,1513241192.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:32.120Z,1513241192.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:32.527Z,1513241192.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:32.610Z,1513241192.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:32.850Z,1513241192.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:32.952Z,1513241192.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:32.991Z,1513241192.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:33.254Z,1513241193.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:33.303Z,1513241193.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:33.348Z,1513241193.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:33.700Z,1513241193.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:33.727Z,1513241193.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:34.051Z,1513241194.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:34.096Z,1513241194.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:34.138Z,1513241194.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:34.505Z,1513241194.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:34.595Z,1513241194.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:34.846Z,1513241194.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:34.911Z,1513241194.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:34.984Z,1513241194.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:35.249Z,1513241195.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:35.305Z,1513241195.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:35.378Z,1513241195.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:35.703Z,1513241195.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:35.748Z,1513241195.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:36.046Z,1513241196.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:36.111Z,1513241196.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:36.152Z,1513241196.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:36.507Z,1513241196.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:36.559Z,1513241196.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:36.842Z,1513241196.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:36.892Z,1513241196.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:36.922Z,1513241196.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:37.246Z,1513241197.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:37.302Z,1513241197.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:37.332Z,1513241197.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:37.701Z,1513241197.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:37.736Z,1513241197.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:38.044Z,1513241198.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:38.098Z,1513241198.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:38.138Z,1513241198.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:38.511Z,1513241198.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:38.539Z,1513241198.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:38.839Z,1513241198.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:38.916Z,1513241198.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:38.940Z,1513241198.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:39.246Z,1513241199.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:39.304Z,1513241199.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:39.338Z,1513241199.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:39.693Z,1513241199.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:39.735Z,1513241199.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:40.042Z,1513241200.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:40.096Z,1513241200.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:40.132Z,1513241200.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:40.541Z,1513241200.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:40.600Z,1513241200.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:40.839Z,1513241200.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:40.929Z,1513241200.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:40.964Z,1513241200.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:41.241Z,1513241201.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:41.296Z,1513241201.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:41.356Z,1513241201.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:41.737Z,1513241201.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:41.798Z,1513241201.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:42.038Z,1513241202.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:42.134Z,1513241202.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:42.164Z,1513241202.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:42.526Z,1513241202.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:42.591Z,1513241202.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:42.834Z,1513241202.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:42.901Z,1513241202.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:42.936Z,1513241202.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:43.238Z,1513241203.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:43.292Z,1513241203.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:43.367Z,1513241203.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:43.693Z,1513241203.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:43.775Z,1513241203.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:44.034Z,1513241204.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:44.091Z,1513241204.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:44.138Z,1513241204.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:44.542Z,1513241204.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:44.593Z,1513241204.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:44.829Z,1513241204.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:44.914Z,1513241204.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:44.935Z,1513241204.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:45.233Z,1513241205.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:45.315Z,1513241205.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:45.337Z,1513241205.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:45.703Z,1513241205.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:45.759Z,1513241205.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:46.030Z,1513241206.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:46.107Z,1513241206.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:46.143Z,1513241206.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:46.534Z,1513241206.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:46.595Z,1513241206.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:46.825Z,1513241206.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:46.902Z,1513241206.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:46.925Z,1513241206.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:47.229Z,1513241207.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:47.299Z,1513241207.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:47.317Z,1513241207.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:47.711Z,1513241207.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:47.741Z,1513241207.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:48.026Z,1513241208.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:48.113Z,1513241208.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:48.145Z,1513241208.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:48.551Z,1513241208.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:48.596Z,1513241208.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:48.821Z,1513241208.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:48.891Z,1513241208.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:48.916Z,1513241208.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:49.225Z,1513241209.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:49.307Z,1513241209.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:49.327Z,1513241209.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:49.691Z,1513241209.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:49.719Z,1513241209.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:50.021Z,1513241210.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:50.095Z,1513241210.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:50.127Z,1513241210.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:50.509Z,1513241210.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:50.524Z,1513241210.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:50.819Z,1513241210.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:50.914Z,1513241210.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:50.929Z,1513241210.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:51.225Z,1513241211.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:51.315Z,1513241211.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:51.335Z,1513241211.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:51.336Z,1513241211.336 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:51.336Z,1513241211.336 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 165
2017-12-14T08:46:51.337Z,1513241211.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:46:51.339Z,1513241211.339 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:51.339Z,1513241211.339 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165
2017-12-14T08:46:51.339Z,1513241211.339 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:46:51.371Z,1513241211.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:46:51.371Z,1513241211.371 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:46:51.708Z,1513241211.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:51.727Z,1513241211.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:51.727Z,1513241211.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165
2017-12-14T08:46:51.727Z,1513241211.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:46:51.739Z,1513241211.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:46:51.740Z,1513241211.740 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:46:51.740Z,1513241211.740 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 165
2017-12-14T08:46:51.740Z,1513241211.740 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:46:51.740Z,1513241211.740 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165
2017-12-14T08:46:52.021Z,1513241212.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:52.091Z,1513241212.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:52.127Z,1513241212.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:46:52.127Z,1513241212.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:46:52.127Z,1513241212.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:46:52.128Z,1513241212.128 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:46:52.128Z,1513241212.128 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:46:52.129Z,1513241212.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:46:52.172Z,1513241212.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:46:52.172Z,1513241212.172 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165
2017-12-14T08:46:52.491Z,1513241212.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:52.527Z,1513241212.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:46:52.528Z,1513241212.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:46:52.528Z,1513241212.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:46:52.819Z,1513241212.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:52.898Z,1513241212.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:52.923Z,1513241212.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:53.225Z,1513241213.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:53.299Z,1513241213.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:53.337Z,1513241213.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:53.702Z,1513241213.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:53.735Z,1513241213.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:54.022Z,1513241214.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:54.110Z,1513241214.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:54.131Z,1513241214.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:54.536Z,1513241214.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:54.560Z,1513241214.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:54.817Z,1513241214.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:54.891Z,1513241214.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:54.954Z,1513241214.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:55.221Z,1513241215.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:55.291Z,1513241215.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:55.339Z,1513241215.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:55.691Z,1513241215.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:55.723Z,1513241215.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:56.017Z,1513241216.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:56.090Z,1513241216.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:56.118Z,1513241216.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:56.540Z,1513241216.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:56.568Z,1513241216.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:56.814Z,1513241216.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:56.915Z,1513241216.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:56.939Z,1513241216.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:57.217Z,1513241217.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:57.310Z,1513241217.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:57.326Z,1513241217.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:57.691Z,1513241217.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:57.724Z,1513241217.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:58.013Z,1513241218.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:58.091Z,1513241218.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:58.119Z,1513241218.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:58.578Z,1513241218.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:58.620Z,1513241218.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:58.810Z,1513241218.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:58.890Z,1513241218.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:58.926Z,1513241218.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:59.213Z,1513241219.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:59.309Z,1513241219.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:59.324Z,1513241219.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:46:59.717Z,1513241219.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:46:59.732Z,1513241219.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:00.010Z,1513241220.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:00.114Z,1513241220.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:00.129Z,1513241220.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:00.523Z,1513241220.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:00.571Z,1513241220.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:00.805Z,1513241220.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:00.891Z,1513241220.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:00.920Z,1513241220.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:01.210Z,1513241221.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:01.294Z,1513241221.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:01.328Z,1513241221.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:01.711Z,1513241221.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:01.725Z,1513241221.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:02.005Z,1513241222.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:02.113Z,1513241222.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:02.128Z,1513241222.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:02.550Z,1513241222.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:02.598Z,1513241222.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:02.801Z,1513241222.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:02.904Z,1513241222.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:02.929Z,1513241222.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:03.205Z,1513241223.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:03.295Z,1513241223.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:03.319Z,1513241223.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:03.691Z,1513241223.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:03.711Z,1513241223.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:04.001Z,1513241224.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:04.097Z,1513241224.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:04.111Z,1513241224.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:04.510Z,1513241224.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:04.535Z,1513241224.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:04.799Z,1513241224.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:04.944Z,1513241224.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:04.991Z,1513241224.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:05.221Z,1513241225.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:05.314Z,1513241225.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:05.343Z,1513241225.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:05.695Z,1513241225.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:05.758Z,1513241225.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:06.018Z,1513241226.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:06.101Z,1513241226.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:06.116Z,1513241226.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:06.499Z,1513241226.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:06.514Z,1513241226.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:06.815Z,1513241226.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:06.901Z,1513241226.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:06.971Z,1513241226.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:07.225Z,1513241227.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:07.300Z,1513241227.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:07.329Z,1513241227.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:07.708Z,1513241227.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:07.724Z,1513241227.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:08.021Z,1513241228.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:08.110Z,1513241228.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:08.179Z,1513241228.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:08.528Z,1513241228.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:08.556Z,1513241228.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:08.817Z,1513241228.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:08.898Z,1513241228.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:08.950Z,1513241228.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:09.221Z,1513241229.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:09.300Z,1513241229.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:09.315Z,1513241229.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:09.698Z,1513241229.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:09.721Z,1513241229.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:10.018Z,1513241230.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:10.103Z,1513241230.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:10.117Z,1513241230.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:10.522Z,1513241230.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:10.538Z,1513241230.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:10.813Z,1513241230.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:10.921Z,1513241230.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:10.936Z,1513241230.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:11.320Z,1513241231.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:11.374Z,1513241231.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:11.610Z,1513241231.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:11.692Z,1513241231.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:11.727Z,1513241231.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:12.090Z,1513241232.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:12.132Z,1513241232.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:12.406Z,1513241232.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:12.518Z,1513241232.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:12.534Z,1513241232.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:12.891Z,1513241232.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:12.922Z,1513241232.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:13.202Z,1513241233.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:13.295Z,1513241233.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:13.330Z,1513241233.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:13.705Z,1513241233.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:13.736Z,1513241233.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:13.997Z,1513241233.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:14.109Z,1513241234.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:14.180Z,1513241234.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:14.528Z,1513241234.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:14.588Z,1513241234.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:14.794Z,1513241234.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:14.901Z,1513241234.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:14.915Z,1513241234.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:15.297Z,1513241235.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:15.312Z,1513241235.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:15.589Z,1513241235.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:15.698Z,1513241235.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:15.713Z,1513241235.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:16.103Z,1513241236.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:16.117Z,1513241236.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:16.385Z,1513241236.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:16.521Z,1513241236.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:16.562Z,1513241236.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:16.918Z,1513241236.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:16.939Z,1513241236.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:17.181Z,1513241237.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:17.314Z,1513241237.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:17.370Z,1513241237.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:17.688Z,1513241237.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:17.744Z,1513241237.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:17.978Z,1513241237.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:18.111Z,1513241238.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:18.135Z,1513241238.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:18.496Z,1513241238.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:18.523Z,1513241238.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:18.775Z,1513241238.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:18.891Z,1513241238.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:18.935Z,1513241238.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:19.292Z,1513241239.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:19.307Z,1513241239.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:19.570Z,1513241239.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:19.701Z,1513241239.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:19.736Z,1513241239.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:20.109Z,1513241240.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:20.140Z,1513241240.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:20.365Z,1513241240.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:20.509Z,1513241240.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:20.535Z,1513241240.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:20.904Z,1513241240.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:20.959Z,1513241240.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:21.162Z,1513241241.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:21.453Z,1513241241.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:21.476Z,1513241241.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:21.697Z,1513241241.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:21.713Z,1513241241.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:21.730Z,1513241241.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:22.091Z,1513241242.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.101Z,1513241242.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.128Z,1513241242.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:22.506Z,1513241242.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.538Z,1513241242.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.569Z,1513241242.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:22.910Z,1513241242.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.924Z,1513241242.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:22.943Z,1513241242.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:23.315Z,1513241243.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:23.321Z,1513241243.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:23.391Z,1513241243.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:23.695Z,1513241243.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:23.722Z,1513241243.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:23.730Z,1513241243.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:24.126Z,1513241244.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:24.146Z,1513241244.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:24.176Z,1513241244.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:24.527Z,1513241244.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:24.559Z,1513241244.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:24.896Z,1513241244.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:24.902Z,1513241244.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:24.926Z,1513241244.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:25.291Z,1513241245.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:25.331Z,1513241245.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:25.697Z,1513241245.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:26.494Z,1513241246.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:26.902Z,1513241246.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:27.698Z,1513241247.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:28.494Z,1513241248.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:28.847Z,1513241248.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:28.879Z,1513241248.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:28.897Z,1513241248.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:28.994Z,1513241248.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:29.028Z,1513241249.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:29.346Z,1513241249.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:29.399Z,1513241249.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:29.693Z,1513241249.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:29.739Z,1513241249.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:29.777Z,1513241249.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:30.134Z,1513241250.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:30.188Z,1513241250.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:30.492Z,1513241250.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:30.598Z,1513241250.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:30.652Z,1513241250.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:30.938Z,1513241250.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:30.973Z,1513241250.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:30.986Z,1513241250.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:31.351Z,1513241251.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:31.383Z,1513241251.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:31.741Z,1513241251.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:31.757Z,1513241251.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:31.777Z,1513241251.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:32.146Z,1513241252.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:32.168Z,1513241252.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:32.540Z,1513241252.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:32.559Z,1513241252.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:32.589Z,1513241252.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:32.933Z,1513241252.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:32.963Z,1513241252.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:33.217Z,1513241253.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:33.331Z,1513241253.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:33.358Z,1513241253.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:33.752Z,1513241253.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:33.771Z,1513241253.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:34.013Z,1513241254.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:34.151Z,1513241254.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:34.166Z,1513241254.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:34.537Z,1513241254.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:34.572Z,1513241254.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:34.811Z,1513241254.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:34.928Z,1513241254.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:34.963Z,1513241254.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:35.225Z,1513241255.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:35.339Z,1513241255.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:35.366Z,1513241255.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:35.728Z,1513241255.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:35.767Z,1513241255.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:36.021Z,1513241256.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:36.125Z,1513241256.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:36.140Z,1513241256.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:36.559Z,1513241256.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:36.579Z,1513241256.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:36.817Z,1513241256.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:36.983Z,1513241256.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:37.036Z,1513241257.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:37.221Z,1513241257.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:37.338Z,1513241257.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:37.354Z,1513241257.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:37.732Z,1513241257.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:37.752Z,1513241257.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:38.017Z,1513241258.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:38.136Z,1513241258.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:38.151Z,1513241258.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:38.533Z,1513241258.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:38.558Z,1513241258.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:38.815Z,1513241258.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:38.932Z,1513241258.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:38.951Z,1513241258.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:39.221Z,1513241259.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:39.336Z,1513241259.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:39.382Z,1513241259.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:39.750Z,1513241259.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:39.780Z,1513241259.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:40.018Z,1513241260.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:40.154Z,1513241260.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:40.207Z,1513241260.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:40.542Z,1513241260.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:40.563Z,1513241260.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:40.813Z,1513241260.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:40.934Z,1513241260.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:40.951Z,1513241260.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:41.219Z,1513241261.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:41.334Z,1513241261.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:41.349Z,1513241261.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:41.740Z,1513241261.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:41.754Z,1513241261.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:42.013Z,1513241262.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:42.131Z,1513241262.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:42.150Z,1513241262.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:42.544Z,1513241262.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:42.561Z,1513241262.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:42.809Z,1513241262.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:42.945Z,1513241262.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:42.960Z,1513241262.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:43.213Z,1513241263.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:43.363Z,1513241263.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:43.394Z,1513241263.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:43.735Z,1513241263.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:43.750Z,1513241263.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:44.010Z,1513241264.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:44.136Z,1513241264.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:44.150Z,1513241264.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:44.563Z,1513241264.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:44.606Z,1513241264.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:44.805Z,1513241264.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:44.928Z,1513241264.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:44.963Z,1513241264.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:45.209Z,1513241265.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:45.326Z,1513241265.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:45.355Z,1513241265.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:45.749Z,1513241265.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:45.765Z,1513241265.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:46.006Z,1513241266.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:46.149Z,1513241266.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:46.164Z,1513241266.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:46.549Z,1513241266.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:46.604Z,1513241266.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:46.803Z,1513241266.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:46.927Z,1513241266.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:46.953Z,1513241266.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:47.225Z,1513241267.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:47.328Z,1513241267.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:47.363Z,1513241267.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:47.727Z,1513241267.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:47.760Z,1513241267.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:48.022Z,1513241268.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:48.127Z,1513241268.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:48.161Z,1513241268.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:48.548Z,1513241268.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:48.563Z,1513241268.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:48.819Z,1513241268.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:48.946Z,1513241268.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:48.961Z,1513241268.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:49.241Z,1513241269.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:49.345Z,1513241269.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:49.360Z,1513241269.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:49.752Z,1513241269.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:49.784Z,1513241269.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:50.038Z,1513241270.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:50.135Z,1513241270.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:50.154Z,1513241270.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:50.541Z,1513241270.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:50.566Z,1513241270.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:50.833Z,1513241270.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:50.931Z,1513241270.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:50.961Z,1513241270.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:51.237Z,1513241271.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:51.339Z,1513241271.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:51.429Z,1513241271.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:51.747Z,1513241271.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:51.773Z,1513241271.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:52.034Z,1513241272.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:52.154Z,1513241272.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:52.210Z,1513241272.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:52.546Z,1513241272.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:52.561Z,1513241272.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:52.829Z,1513241272.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:52.967Z,1513241272.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:53.023Z,1513241273.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:53.233Z,1513241273.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:53.327Z,1513241273.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:53.362Z,1513241273.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:53.727Z,1513241273.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:53.766Z,1513241273.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:54.029Z,1513241274.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:54.125Z,1513241274.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:54.163Z,1513241274.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:54.539Z,1513241274.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:54.565Z,1513241274.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:54.825Z,1513241274.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:54.949Z,1513241274.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:54.972Z,1513241274.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:55.229Z,1513241275.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:55.349Z,1513241275.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:55.365Z,1513241275.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:55.726Z,1513241275.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:55.762Z,1513241275.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:56.025Z,1513241276.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:56.127Z,1513241276.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:56.158Z,1513241276.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:56.528Z,1513241276.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:56.567Z,1513241276.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:56.821Z,1513241276.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:56.937Z,1513241276.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:56.968Z,1513241276.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:57.225Z,1513241277.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:57.331Z,1513241277.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:57.346Z,1513241277.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:57.742Z,1513241277.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:57.759Z,1513241277.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:58.022Z,1513241278.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:58.150Z,1513241278.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:58.172Z,1513241278.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:58.575Z,1513241278.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:58.620Z,1513241278.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:58.817Z,1513241278.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:58.931Z,1513241278.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:58.957Z,1513241278.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:59.221Z,1513241279.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:59.354Z,1513241279.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:59.378Z,1513241279.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:47:59.727Z,1513241279.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:47:59.763Z,1513241279.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:00.017Z,1513241280.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:00.120Z,1513241280.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:00.150Z,1513241280.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:00.545Z,1513241280.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:00.561Z,1513241280.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:00.815Z,1513241280.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:00.951Z,1513241280.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:00.968Z,1513241280.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:01.221Z,1513241281.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:01.342Z,1513241281.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:01.395Z,1513241281.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:01.740Z,1513241281.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:01.755Z,1513241281.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:02.017Z,1513241282.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:02.126Z,1513241282.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:02.161Z,1513241282.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:02.538Z,1513241282.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:02.560Z,1513241282.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:02.815Z,1513241282.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:02.927Z,1513241282.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:02.952Z,1513241282.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:03.225Z,1513241283.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:03.327Z,1513241283.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:03.355Z,1513241283.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:03.750Z,1513241283.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:03.765Z,1513241283.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:04.022Z,1513241284.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:04.146Z,1513241284.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:04.169Z,1513241284.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:04.546Z,1513241284.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:04.562Z,1513241284.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:04.817Z,1513241284.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:04.927Z,1513241284.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:04.952Z,1513241284.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:05.221Z,1513241285.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:05.331Z,1513241285.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:05.367Z,1513241285.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:05.773Z,1513241285.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:05.812Z,1513241285.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:06.018Z,1513241286.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:06.127Z,1513241286.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:06.142Z,1513241286.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:06.558Z,1513241286.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:06.578Z,1513241286.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:06.813Z,1513241286.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:06.959Z,1513241286.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:06.974Z,1513241286.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:07.217Z,1513241287.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:07.338Z,1513241287.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:07.368Z,1513241287.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:07.732Z,1513241287.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:07.747Z,1513241287.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:08.013Z,1513241288.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:08.135Z,1513241288.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:08.150Z,1513241288.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:08.533Z,1513241288.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:08.574Z,1513241288.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:08.811Z,1513241288.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:08.966Z,1513241288.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:09.005Z,1513241289.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:09.217Z,1513241289.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:09.326Z,1513241289.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:09.358Z,1513241289.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:09.746Z,1513241289.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:09.762Z,1513241289.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:10.014Z,1513241290.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:10.148Z,1513241290.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:10.168Z,1513241290.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:10.548Z,1513241290.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:10.563Z,1513241290.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:10.809Z,1513241290.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:10.951Z,1513241290.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:10.971Z,1513241290.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:11.213Z,1513241291.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:11.331Z,1513241291.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:11.357Z,1513241291.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:11.728Z,1513241291.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:11.770Z,1513241291.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:12.009Z,1513241292.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:12.173Z,1513241292.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:12.215Z,1513241292.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:12.572Z,1513241292.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:12.591Z,1513241292.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:12.805Z,1513241292.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:12.946Z,1513241292.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:12.981Z,1513241292.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:13.209Z,1513241293.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:13.358Z,1513241293.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:13.431Z,1513241293.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:13.732Z,1513241293.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:13.748Z,1513241293.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:14.008Z,1513241294.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:14.133Z,1513241294.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:14.148Z,1513241294.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:14.533Z,1513241294.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:14.579Z,1513241294.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:14.804Z,1513241294.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:14.936Z,1513241294.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:14.951Z,1513241294.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:15.213Z,1513241295.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:15.367Z,1513241295.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:15.408Z,1513241295.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:15.738Z,1513241295.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:15.756Z,1513241295.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:16.010Z,1513241296.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:16.150Z,1513241296.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:16.185Z,1513241296.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:16.541Z,1513241296.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:16.556Z,1513241296.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:16.807Z,1513241296.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:16.947Z,1513241296.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:16.963Z,1513241296.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:17.224Z,1513241297.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:17.331Z,1513241297.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:17.359Z,1513241297.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:17.742Z,1513241297.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:17.756Z,1513241297.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:18.017Z,1513241298.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:18.120Z,1513241298.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:18.155Z,1513241298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:18.584Z,1513241298.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:18.620Z,1513241298.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:18.813Z,1513241298.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:18.950Z,1513241298.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:18.967Z,1513241298.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:19.217Z,1513241299.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:19.346Z,1513241299.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:19.361Z,1513241299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:19.740Z,1513241299.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:19.754Z,1513241299.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:20.013Z,1513241300.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:20.126Z,1513241300.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:20.159Z,1513241300.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:20.528Z,1513241300.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:20.561Z,1513241300.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:20.810Z,1513241300.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:20.927Z,1513241300.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:20.952Z,1513241300.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:21.213Z,1513241301.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:21.326Z,1513241301.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:21.359Z,1513241301.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:21.764Z,1513241301.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:21.799Z,1513241301.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:22.010Z,1513241302.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:22.150Z,1513241302.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:22.171Z,1513241302.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:22.546Z,1513241302.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:22.561Z,1513241302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:22.805Z,1513241302.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:22.927Z,1513241302.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:22.958Z,1513241302.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:23.209Z,1513241303.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:23.327Z,1513241303.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:23.359Z,1513241303.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:23.727Z,1513241303.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:23.780Z,1513241303.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:24.007Z,1513241304.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:24.132Z,1513241304.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:24.158Z,1513241304.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:24.545Z,1513241304.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:24.561Z,1513241304.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:24.801Z,1513241304.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:24.968Z,1513241304.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:24.995Z,1513241304.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:25.205Z,1513241305.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:25.345Z,1513241305.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:25.360Z,1513241305.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:26.002Z,1513241306.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:26.797Z,1513241306.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:27.201Z,1513241307.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:27.997Z,1513241307.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:28.795Z,1513241308.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.034Z,1513241309.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.057Z,1513241309.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:29.167Z,1513241309.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.187Z,1513241309.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:29.237Z,1513241309.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.522Z,1513241309.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.561Z,1513241309.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:29.933Z,1513241309.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:29.967Z,1513241309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:30.033Z,1513241310.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:30.319Z,1513241310.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:30.348Z,1513241310.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:30.716Z,1513241310.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:30.758Z,1513241310.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:30.831Z,1513241310.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:31.106Z,1513241311.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:31.138Z,1513241311.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:31.241Z,1513241311.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:31.512Z,1513241311.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:31.536Z,1513241311.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:31.924Z,1513241311.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:31.943Z,1513241311.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:32.038Z,1513241312.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:32.312Z,1513241312.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:32.351Z,1513241312.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:32.723Z,1513241312.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:32.747Z,1513241312.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:32.833Z,1513241312.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:33.143Z,1513241313.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:33.159Z,1513241313.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:33.237Z,1513241313.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:33.534Z,1513241313.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:33.557Z,1513241313.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:33.909Z,1513241313.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:33.950Z,1513241313.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:34.034Z,1513241314.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:34.313Z,1513241314.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:34.344Z,1513241314.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:34.738Z,1513241314.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:34.754Z,1513241314.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:34.830Z,1513241314.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:35.116Z,1513241315.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:35.154Z,1513241315.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:35.233Z,1513241315.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:35.521Z,1513241315.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:35.583Z,1513241315.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:35.917Z,1513241315.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:35.976Z,1513241315.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:36.029Z,1513241316.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:36.322Z,1513241316.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:36.355Z,1513241316.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:36.715Z,1513241316.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:36.735Z,1513241316.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:36.825Z,1513241316.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:37.106Z,1513241317.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:37.163Z,1513241317.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:37.229Z,1513241317.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:37.508Z,1513241317.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:37.523Z,1513241317.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:37.912Z,1513241317.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:37.971Z,1513241317.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:38.026Z,1513241318.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:38.314Z,1513241318.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:38.339Z,1513241318.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:38.720Z,1513241318.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:38.759Z,1513241318.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:38.821Z,1513241318.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:39.129Z,1513241319.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:39.148Z,1513241319.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:39.225Z,1513241319.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:39.524Z,1513241319.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:39.549Z,1513241319.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:39.900Z,1513241319.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:39.934Z,1513241319.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:40.022Z,1513241320.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:40.314Z,1513241320.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:40.346Z,1513241320.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:40.713Z,1513241320.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:40.738Z,1513241320.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:40.818Z,1513241320.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:41.123Z,1513241321.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:41.139Z,1513241321.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:41.221Z,1513241321.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:41.533Z,1513241321.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:41.548Z,1513241321.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:41.924Z,1513241321.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:41.952Z,1513241321.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:42.017Z,1513241322.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:42.314Z,1513241322.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:42.346Z,1513241322.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:42.714Z,1513241322.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:42.735Z,1513241322.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:42.815Z,1513241322.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:43.103Z,1513241323.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:43.141Z,1513241323.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:43.233Z,1513241323.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:43.508Z,1513241323.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:43.548Z,1513241323.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:43.910Z,1513241323.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:43.973Z,1513241323.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:44.030Z,1513241324.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:44.310Z,1513241324.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:44.347Z,1513241324.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:44.721Z,1513241324.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:44.751Z,1513241324.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:44.827Z,1513241324.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:45.149Z,1513241325.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:45.165Z,1513241325.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:45.249Z,1513241325.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:45.517Z,1513241325.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:45.551Z,1513241325.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:45.909Z,1513241325.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:45.931Z,1513241325.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:46.046Z,1513241326.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:46.312Z,1513241326.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:46.356Z,1513241326.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:46.712Z,1513241326.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:46.757Z,1513241326.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:46.841Z,1513241326.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:47.128Z,1513241327.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:47.172Z,1513241327.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:47.246Z,1513241327.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:47.519Z,1513241327.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:47.537Z,1513241327.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:47.923Z,1513241327.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:47.960Z,1513241327.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:48.042Z,1513241328.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:48.318Z,1513241328.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:48.357Z,1513241328.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:48.712Z,1513241328.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:48.736Z,1513241328.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:48.837Z,1513241328.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:49.103Z,1513241329.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:49.147Z,1513241329.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:49.241Z,1513241329.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:49.503Z,1513241329.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:49.536Z,1513241329.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:49.903Z,1513241329.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:49.950Z,1513241329.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:50.037Z,1513241330.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:50.334Z,1513241330.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:50.398Z,1513241330.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:50.727Z,1513241330.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:50.749Z,1513241330.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:50.833Z,1513241330.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:51.137Z,1513241331.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:51.152Z,1513241331.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:51.237Z,1513241331.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:51.522Z,1513241331.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:51.553Z,1513241331.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:51.905Z,1513241331.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:51.951Z,1513241331.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:52.035Z,1513241332.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:52.312Z,1513241332.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:52.355Z,1513241332.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:52.719Z,1513241332.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:52.733Z,1513241332.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:52.829Z,1513241332.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:53.115Z,1513241333.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:53.166Z,1513241333.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:53.233Z,1513241333.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:53.519Z,1513241333.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:53.556Z,1513241333.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:53.925Z,1513241333.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:53.940Z,1513241333.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:54.030Z,1513241334.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:54.329Z,1513241334.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:54.361Z,1513241334.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:54.711Z,1513241334.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:54.755Z,1513241334.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:54.825Z,1513241334.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:55.106Z,1513241335.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:55.146Z,1513241335.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:55.229Z,1513241335.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:55.518Z,1513241335.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:55.539Z,1513241335.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:55.917Z,1513241335.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:55.931Z,1513241335.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:56.026Z,1513241336.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:56.311Z,1513241336.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:56.359Z,1513241336.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:56.739Z,1513241336.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:56.823Z,1513241336.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:56.845Z,1513241336.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:57.133Z,1513241337.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:57.152Z,1513241337.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:57.245Z,1513241337.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:57.523Z,1513241337.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:57.546Z,1513241337.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:57.907Z,1513241337.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:57.951Z,1513241337.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:58.042Z,1513241338.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:58.303Z,1513241338.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:58.355Z,1513241338.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:58.708Z,1513241338.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:58.837Z,1513241338.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:58.847Z,1513241338.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:59.110Z,1513241339.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:59.144Z,1513241339.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:59.241Z,1513241339.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:59.512Z,1513241339.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:59.581Z,1513241339.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:48:59.917Z,1513241339.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:48:59.963Z,1513241339.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:00.038Z,1513241340.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:00.314Z,1513241340.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:00.367Z,1513241340.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:00.723Z,1513241340.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:00.754Z,1513241340.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:00.833Z,1513241340.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:01.108Z,1513241341.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:01.159Z,1513241341.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:01.237Z,1513241341.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:01.509Z,1513241341.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:01.525Z,1513241341.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:01.909Z,1513241341.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:01.931Z,1513241341.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:02.033Z,1513241342.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:02.314Z,1513241342.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:02.329Z,1513241342.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:02.726Z,1513241342.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:02.761Z,1513241342.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:02.829Z,1513241342.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:03.155Z,1513241343.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:03.179Z,1513241343.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:03.234Z,1513241343.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:03.538Z,1513241343.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:03.562Z,1513241343.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:03.918Z,1513241343.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:03.986Z,1513241343.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:04.030Z,1513241344.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:04.315Z,1513241344.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:04.359Z,1513241344.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:04.722Z,1513241344.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:04.744Z,1513241344.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:04.825Z,1513241344.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:05.108Z,1513241345.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:05.138Z,1513241345.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:05.229Z,1513241345.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:05.527Z,1513241345.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:05.547Z,1513241345.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:05.927Z,1513241345.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:05.970Z,1513241345.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:06.025Z,1513241346.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:06.341Z,1513241346.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:06.348Z,1513241346.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x57444 got:0x6591
2017-12-14T08:49:06.378Z,1513241346.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:06.711Z,1513241346.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:06.746Z,1513241346.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:06.821Z,1513241346.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:07.109Z,1513241347.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:07.128Z,1513241347.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:07.226Z,1513241347.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:07.515Z,1513241347.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:07.567Z,1513241347.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:07.912Z,1513241347.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:07.958Z,1513241347.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:08.021Z,1513241348.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:08.305Z,1513241348.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:08.328Z,1513241348.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:08.727Z,1513241348.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:08.783Z,1513241348.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:08.817Z,1513241348.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:09.126Z,1513241349.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:09.163Z,1513241349.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:09.221Z,1513241349.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:09.530Z,1513241349.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:09.557Z,1513241349.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:09.903Z,1513241349.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:09.950Z,1513241349.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:10.018Z,1513241350.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:10.314Z,1513241350.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:10.330Z,1513241350.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:10.713Z,1513241350.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:10.759Z,1513241350.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:10.815Z,1513241350.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:11.110Z,1513241351.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:11.133Z,1513241351.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:11.164Z,1513241351.164 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:49:11.237Z,1513241351.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:11.527Z,1513241351.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:11.562Z,1513241351.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:11.921Z,1513241351.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:11.937Z,1513241351.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:12.034Z,1513241352.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:12.316Z,1513241352.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:12.359Z,1513241352.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:12.711Z,1513241352.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:12.729Z,1513241352.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:12.831Z,1513241352.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:13.102Z,1513241353.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:13.142Z,1513241353.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:13.237Z,1513241353.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:13.505Z,1513241353.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:13.538Z,1513241353.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:13.904Z,1513241353.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:13.931Z,1513241353.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:14.033Z,1513241354.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:14.296Z,1513241354.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:14.311Z,1513241354.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:14.714Z,1513241354.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:14.748Z,1513241354.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:14.830Z,1513241354.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:15.125Z,1513241355.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:15.156Z,1513241355.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:15.234Z,1513241355.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:15.517Z,1513241355.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:15.563Z,1513241355.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:15.907Z,1513241355.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:15.951Z,1513241355.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:16.030Z,1513241356.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:16.334Z,1513241356.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:16.349Z,1513241356.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:16.704Z,1513241356.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:16.737Z,1513241356.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:16.825Z,1513241356.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:17.109Z,1513241357.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:17.156Z,1513241357.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:17.229Z,1513241357.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:17.521Z,1513241357.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:17.550Z,1513241357.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:17.937Z,1513241357.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:17.952Z,1513241357.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:18.026Z,1513241358.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:18.325Z,1513241358.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:18.348Z,1513241358.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:18.707Z,1513241358.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:18.755Z,1513241358.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:18.822Z,1513241358.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:19.108Z,1513241359.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:19.160Z,1513241359.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:19.226Z,1513241359.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:19.511Z,1513241359.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:19.534Z,1513241359.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:19.917Z,1513241359.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:19.925Z,1513241359.925 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T08:49:19.925Z,1513241359.925 [BPC1] Data Fault, FailCount= 1
2017-12-14T08:49:19.925Z,1513241359.925 [BPC1](ERROR): Data Fault
2017-12-14T08:49:19.933Z,1513241359.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:19.963Z,1513241359.963 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T08:49:20.021Z,1513241360.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:20.320Z,1513241360.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:20.348Z,1513241360.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:20.724Z,1513241360.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:20.747Z,1513241360.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:20.817Z,1513241360.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:21.126Z,1513241361.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:21.150Z,1513241361.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:21.171Z,1513241361.171 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:49:21.172Z,1513241361.172 [BPC1] No Fault, FailCount= 1
2017-12-14T08:49:21.221Z,1513241361.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:21.522Z,1513241361.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:21.591Z,1513241361.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:21.907Z,1513241361.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:21.951Z,1513241361.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:22.018Z,1513241362.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:22.328Z,1513241362.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:22.387Z,1513241362.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:22.704Z,1513241362.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:22.739Z,1513241362.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:22.816Z,1513241362.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:23.103Z,1513241363.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:23.139Z,1513241363.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:23.221Z,1513241363.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:23.518Z,1513241363.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:23.551Z,1513241363.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:23.929Z,1513241363.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:23.947Z,1513241363.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:24.017Z,1513241364.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:24.334Z,1513241364.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:24.350Z,1513241364.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:24.704Z,1513241364.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:24.736Z,1513241364.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:24.740Z,1513241364.740 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:44:24.5Z
2017-12-14T08:49:24.740Z,1513241364.740 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T08:49:24.740Z,1513241364.740 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T08:49:24.815Z,1513241364.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:25.104Z,1513241365.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:25.143Z,1513241365.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:25.229Z,1513241365.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:25.996Z,1513241365.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:26.015Z,1513241366.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:26.026Z,1513241366.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:26.823Z,1513241366.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:27.245Z,1513241367.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:28.041Z,1513241368.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:28.838Z,1513241368.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:29.241Z,1513241369.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:29.337Z,1513241369.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:29.352Z,1513241369.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:29.434Z,1513241369.434 [DataOverHttps](INFO): Sending 144 bytes from file Logs/20171214T002839/Courier0192.lzma
2017-12-14T08:49:29.465Z,1513241369.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:29.514Z,1513241369.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:29.817Z,1513241369.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:29.867Z,1513241369.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:30.038Z,1513241370.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:30.187Z,1513241370.187 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0192.lzma.bak
2017-12-14T08:49:30.187Z,1513241370.187 [DataOverHttps](INFO): SBD MOMSN=5438367
2017-12-14T08:49:30.223Z,1513241370.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:30.255Z,1513241370.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:30.833Z,1513241370.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:31.237Z,1513241371.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:32.034Z,1513241372.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:32.829Z,1513241372.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:33.233Z,1513241373.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:33.369Z,1513241373.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:33.384Z,1513241373.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:33.491Z,1513241373.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:33.534Z,1513241373.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:34.029Z,1513241374.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:34.825Z,1513241374.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:35.229Z,1513241375.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:36.025Z,1513241376.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:36.821Z,1513241376.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:36.975Z,1513241376.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:36.995Z,1513241376.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:37.106Z,1513241377.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:37.138Z,1513241377.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:37.225Z,1513241377.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:37.507Z,1513241377.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:37.542Z,1513241377.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:37.895Z,1513241377.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:37.925Z,1513241377.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:38.022Z,1513241378.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:38.286Z,1513241378.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:38.302Z,1513241378.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:38.688Z,1513241378.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:38.703Z,1513241378.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:38.855Z,1513241378.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:39.257Z,1513241379.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:40.054Z,1513241380.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:40.850Z,1513241380.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:41.253Z,1513241381.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:42.050Z,1513241382.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:42.138Z,1513241382.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:42.244Z,1513241382.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:42.509Z,1513241382.509 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0193.lzma
2017-12-14T08:49:42.562Z,1513241382.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:42.583Z,1513241382.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:42.725Z,1513241382.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:42.759Z,1513241382.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:42.846Z,1513241382.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:43.080Z,1513241383.080 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0193.lzma.bak
2017-12-14T08:49:43.080Z,1513241383.080 [DataOverHttps](INFO): SBD MOMSN=5438372
2017-12-14T08:49:43.139Z,1513241383.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:43.183Z,1513241383.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:49:43.249Z,1513241383.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:44.046Z,1513241384.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:44.841Z,1513241384.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:45.245Z,1513241385.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:46.042Z,1513241386.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:46.837Z,1513241386.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:47.241Z,1513241387.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:48.037Z,1513241388.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:48.833Z,1513241388.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:49.237Z,1513241389.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:50.033Z,1513241390.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:50.829Z,1513241390.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:51.233Z,1513241391.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:52.030Z,1513241392.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:52.826Z,1513241392.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:53.233Z,1513241393.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:54.029Z,1513241394.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:54.830Z,1513241394.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:55.245Z,1513241395.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:56.041Z,1513241396.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:56.841Z,1513241396.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:57.245Z,1513241397.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:58.042Z,1513241398.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:58.839Z,1513241398.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:49:59.242Z,1513241399.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:00.037Z,1513241400.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:00.833Z,1513241400.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:01.237Z,1513241401.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:02.033Z,1513241402.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:02.829Z,1513241402.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:03.233Z,1513241403.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:04.029Z,1513241404.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:04.825Z,1513241404.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:05.229Z,1513241405.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:06.026Z,1513241406.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:06.823Z,1513241406.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:07.229Z,1513241407.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:08.025Z,1513241408.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:08.823Z,1513241408.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:09.503Z,1513241409.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:09.514Z,1513241409.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:09.546Z,1513241409.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:09.546Z,1513241409.546 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166
2017-12-14T08:50:09.546Z,1513241409.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:50:09.547Z,1513241409.547 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:09.548Z,1513241409.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 166
2017-12-14T08:50:09.548Z,1513241409.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:50:09.550Z,1513241409.550 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:09.550Z,1513241409.550 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166
2017-12-14T08:50:09.550Z,1513241409.550 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:50:09.552Z,1513241409.552 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T08:50:09.552Z,1513241409.552 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T08:50:09.552Z,1513241409.552 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T08:50:09.562Z,1513241409.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:50:09.562Z,1513241409.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:50:09.562Z,1513241409.562 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:50:09.654Z,1513241409.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:09.742Z,1513241409.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:50:09.742Z,1513241409.742 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166
2017-12-14T08:50:09.743Z,1513241409.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:50:09.743Z,1513241409.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 166
2017-12-14T08:50:09.743Z,1513241409.743 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:50:09.743Z,1513241409.743 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166
2017-12-14T08:50:10.297Z,1513241410.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:10.906Z,1513241410.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:11.701Z,1513241411.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:12.499Z,1513241412.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:12.901Z,1513241412.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:13.358Z,1513241413.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:13.371Z,1513241413.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:50:13.372Z,1513241413.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:50:13.372Z,1513241413.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:50:13.372Z,1513241413.372 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:50:13.373Z,1513241413.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:50:13.373Z,1513241413.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:50:13.374Z,1513241413.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:50:13.374Z,1513241413.374 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:50:13.374Z,1513241413.374 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:50:13.502Z,1513241413.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:13.549Z,1513241413.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:13.698Z,1513241413.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:13.880Z,1513241413.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:13.910Z,1513241413.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:14.259Z,1513241414.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:14.275Z,1513241414.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:14.494Z,1513241414.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:14.671Z,1513241414.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:14.703Z,1513241414.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:14.897Z,1513241414.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:15.060Z,1513241415.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:15.084Z,1513241415.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:15.470Z,1513241415.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:15.485Z,1513241415.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:15.693Z,1513241415.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:15.870Z,1513241415.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:15.885Z,1513241415.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:16.270Z,1513241416.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:16.291Z,1513241416.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:16.491Z,1513241416.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:16.664Z,1513241416.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:16.687Z,1513241416.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:16.897Z,1513241416.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:17.063Z,1513241417.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:17.079Z,1513241417.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:17.471Z,1513241417.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:17.486Z,1513241417.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:17.693Z,1513241417.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:17.866Z,1513241417.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:17.919Z,1513241417.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:18.269Z,1513241418.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:18.284Z,1513241418.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:18.491Z,1513241418.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:18.674Z,1513241418.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:18.689Z,1513241418.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:18.933Z,1513241418.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:19.074Z,1513241419.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:19.088Z,1513241419.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:19.473Z,1513241419.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:19.488Z,1513241419.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:19.730Z,1513241419.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:19.859Z,1513241419.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:19.894Z,1513241419.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:20.266Z,1513241420.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:20.280Z,1513241420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:20.525Z,1513241420.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:20.675Z,1513241420.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:20.700Z,1513241420.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:21.077Z,1513241421.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:21.092Z,1513241421.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:21.242Z,1513241421.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:21.475Z,1513241421.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:21.490Z,1513241421.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:21.877Z,1513241421.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:21.893Z,1513241421.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:22.037Z,1513241422.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:22.275Z,1513241422.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:22.290Z,1513241422.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:22.655Z,1513241422.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:22.682Z,1513241422.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:22.836Z,1513241422.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:23.055Z,1513241423.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:23.090Z,1513241423.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:23.242Z,1513241423.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:23.483Z,1513241423.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:23.499Z,1513241423.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:23.860Z,1513241423.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:23.891Z,1513241423.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:24.037Z,1513241424.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:24.256Z,1513241424.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:24.296Z,1513241424.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:24.673Z,1513241424.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:24.704Z,1513241424.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:24.833Z,1513241424.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:25.078Z,1513241425.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:25.107Z,1513241425.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:25.237Z,1513241425.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:25.474Z,1513241425.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:25.499Z,1513241425.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:25.859Z,1513241425.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:25.875Z,1513241425.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:26.034Z,1513241426.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:26.274Z,1513241426.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:26.327Z,1513241426.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:26.675Z,1513241426.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:26.690Z,1513241426.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:26.829Z,1513241426.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:27.073Z,1513241427.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:27.088Z,1513241427.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:27.233Z,1513241427.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:27.470Z,1513241427.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:27.502Z,1513241427.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:27.883Z,1513241427.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:27.898Z,1513241427.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:28.030Z,1513241428.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:28.273Z,1513241428.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:28.290Z,1513241428.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:28.655Z,1513241428.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:28.695Z,1513241428.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:28.825Z,1513241428.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:29.055Z,1513241429.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:29.090Z,1513241429.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:29.229Z,1513241429.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:29.454Z,1513241429.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:29.490Z,1513241429.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:29.887Z,1513241429.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:29.987Z,1513241429.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:30.038Z,1513241430.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:30.255Z,1513241430.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:30.271Z,1513241430.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:30.673Z,1513241430.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:30.700Z,1513241430.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:30.833Z,1513241430.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:31.073Z,1513241431.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:31.144Z,1513241431.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:31.237Z,1513241431.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:31.473Z,1513241431.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:31.498Z,1513241431.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:32.003Z,1513241432.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:32.034Z,1513241432.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:32.060Z,1513241432.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:32.261Z,1513241432.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:32.306Z,1513241432.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:32.660Z,1513241432.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:32.743Z,1513241432.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:32.831Z,1513241432.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:33.058Z,1513241433.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:33.079Z,1513241433.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:33.233Z,1513241433.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:33.469Z,1513241433.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:33.484Z,1513241433.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:33.873Z,1513241433.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:33.887Z,1513241433.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:34.029Z,1513241434.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:34.261Z,1513241434.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:34.283Z,1513241434.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:34.660Z,1513241434.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:34.679Z,1513241434.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:34.827Z,1513241434.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:35.062Z,1513241435.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:35.078Z,1513241435.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:35.237Z,1513241435.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:35.464Z,1513241435.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:35.478Z,1513241435.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:35.898Z,1513241435.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:35.919Z,1513241435.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:36.034Z,1513241436.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:36.263Z,1513241436.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:36.283Z,1513241436.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:36.675Z,1513241436.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:36.689Z,1513241436.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:36.833Z,1513241436.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:37.078Z,1513241437.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:37.092Z,1513241437.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:37.237Z,1513241437.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:37.478Z,1513241437.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:37.493Z,1513241437.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:37.855Z,1513241437.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:37.889Z,1513241437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:38.033Z,1513241438.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:38.255Z,1513241438.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:38.287Z,1513241438.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:38.655Z,1513241438.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:38.690Z,1513241438.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:38.829Z,1513241438.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:39.056Z,1513241439.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:39.133Z,1513241439.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:39.233Z,1513241439.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:39.492Z,1513241439.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:39.522Z,1513241439.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:39.874Z,1513241439.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:39.898Z,1513241439.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:40.031Z,1513241440.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:40.270Z,1513241440.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:40.320Z,1513241440.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:40.662Z,1513241440.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:40.693Z,1513241440.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:40.825Z,1513241440.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:41.063Z,1513241441.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:41.103Z,1513241441.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:41.229Z,1513241441.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:41.466Z,1513241441.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:41.508Z,1513241441.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:41.865Z,1513241441.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:41.880Z,1513241441.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:42.026Z,1513241442.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:42.307Z,1513241442.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:42.363Z,1513241442.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:42.665Z,1513241442.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:42.680Z,1513241442.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:42.821Z,1513241442.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:43.088Z,1513241443.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:43.110Z,1513241443.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:43.225Z,1513241443.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:43.478Z,1513241443.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:43.494Z,1513241443.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:43.859Z,1513241443.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:43.886Z,1513241443.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:44.021Z,1513241444.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:44.260Z,1513241444.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:44.286Z,1513241444.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:44.655Z,1513241444.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:44.688Z,1513241444.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:44.820Z,1513241444.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:45.054Z,1513241445.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:45.081Z,1513241445.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:45.225Z,1513241445.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:45.543Z,1513241445.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:45.567Z,1513241445.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:45.877Z,1513241445.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:45.911Z,1513241445.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:46.021Z,1513241446.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:46.261Z,1513241446.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:46.275Z,1513241446.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:46.655Z,1513241446.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:46.675Z,1513241446.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:46.817Z,1513241446.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:47.056Z,1513241447.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:47.072Z,1513241447.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:47.221Z,1513241447.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:47.456Z,1513241447.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:47.475Z,1513241447.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:47.857Z,1513241447.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:47.872Z,1513241447.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:48.018Z,1513241448.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:48.259Z,1513241448.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:48.279Z,1513241448.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:48.669Z,1513241448.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:48.691Z,1513241448.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:48.815Z,1513241448.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:49.070Z,1513241449.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:49.084Z,1513241449.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:49.229Z,1513241449.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:49.471Z,1513241449.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:49.491Z,1513241449.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:49.856Z,1513241449.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:49.871Z,1513241449.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:50.025Z,1513241450.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:50.259Z,1513241450.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:50.279Z,1513241450.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:50.657Z,1513241450.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:50.672Z,1513241450.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:50.823Z,1513241450.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:51.078Z,1513241451.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:51.099Z,1513241451.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:51.249Z,1513241451.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:51.470Z,1513241451.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:51.485Z,1513241451.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:51.869Z,1513241451.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:51.884Z,1513241451.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:52.046Z,1513241452.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:52.264Z,1513241452.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:52.326Z,1513241452.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:52.655Z,1513241452.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:52.675Z,1513241452.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:52.841Z,1513241452.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:53.056Z,1513241453.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:53.103Z,1513241453.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:53.245Z,1513241453.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:53.494Z,1513241453.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:53.509Z,1513241453.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:53.857Z,1513241453.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:53.903Z,1513241453.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:54.042Z,1513241454.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:54.256Z,1513241454.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:54.271Z,1513241454.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:54.665Z,1513241454.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:54.680Z,1513241454.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:54.837Z,1513241454.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:55.068Z,1513241455.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:55.096Z,1513241455.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:55.241Z,1513241455.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:55.473Z,1513241455.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:55.488Z,1513241455.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:55.858Z,1513241455.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:55.872Z,1513241455.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:56.037Z,1513241456.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:56.254Z,1513241456.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:56.269Z,1513241456.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:56.668Z,1513241456.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:56.691Z,1513241456.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:56.833Z,1513241456.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:57.057Z,1513241457.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:57.082Z,1513241457.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:57.237Z,1513241457.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:57.462Z,1513241457.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:57.477Z,1513241457.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:57.870Z,1513241457.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:57.885Z,1513241457.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:58.034Z,1513241458.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:58.269Z,1513241458.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:58.283Z,1513241458.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:58.656Z,1513241458.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:58.672Z,1513241458.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:58.829Z,1513241458.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:59.059Z,1513241459.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:59.080Z,1513241459.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:59.233Z,1513241459.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:59.456Z,1513241459.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:59.471Z,1513241459.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:50:59.859Z,1513241459.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:50:59.875Z,1513241459.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:00.030Z,1513241460.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:00.256Z,1513241460.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:00.271Z,1513241460.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:00.665Z,1513241460.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:00.680Z,1513241460.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:00.825Z,1513241460.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:01.069Z,1513241461.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:01.084Z,1513241461.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:01.229Z,1513241461.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:01.467Z,1513241461.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:01.486Z,1513241461.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:01.858Z,1513241461.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:01.884Z,1513241461.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:02.025Z,1513241462.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:02.248Z,1513241462.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:02.295Z,1513241462.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:02.659Z,1513241462.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:02.674Z,1513241462.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:02.823Z,1513241462.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:03.055Z,1513241463.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:03.075Z,1513241463.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:03.233Z,1513241463.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:03.482Z,1513241463.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:03.504Z,1513241463.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:03.870Z,1513241463.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:03.891Z,1513241463.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:04.030Z,1513241464.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:04.266Z,1513241464.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:04.294Z,1513241464.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:04.655Z,1513241464.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:04.682Z,1513241464.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:04.827Z,1513241464.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:05.055Z,1513241465.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:05.077Z,1513241465.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:05.455Z,1513241465.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:05.498Z,1513241465.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:05.622Z,1513241465.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:05.857Z,1513241465.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:05.880Z,1513241465.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:06.255Z,1513241466.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:06.283Z,1513241466.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:06.417Z,1513241466.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:06.666Z,1513241466.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:06.685Z,1513241466.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:07.073Z,1513241467.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:07.095Z,1513241467.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:07.214Z,1513241467.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:07.473Z,1513241467.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:07.499Z,1513241467.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:07.871Z,1513241467.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:07.901Z,1513241467.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:08.009Z,1513241468.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:08.264Z,1513241468.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:08.299Z,1513241468.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:08.663Z,1513241468.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:08.679Z,1513241468.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:08.805Z,1513241468.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:09.063Z,1513241469.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:09.078Z,1513241469.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:09.473Z,1513241469.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:09.509Z,1513241469.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:09.601Z,1513241469.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:09.869Z,1513241469.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:09.884Z,1513241469.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:10.078Z,1513241470.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:10.274Z,1513241470.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:10.288Z,1513241470.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:10.484Z,1513241470.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:10.893Z,1513241470.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:11.298Z,1513241471.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:12.094Z,1513241472.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:12.889Z,1513241472.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:13.293Z,1513241473.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:13.910Z,1513241473.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:13.925Z,1513241473.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:14.031Z,1513241474.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:14.087Z,1513241474.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:14.091Z,1513241474.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:14.434Z,1513241474.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:14.465Z,1513241474.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:14.838Z,1513241474.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:14.885Z,1513241474.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:14.903Z,1513241474.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:15.232Z,1513241475.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:15.255Z,1513241475.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:15.289Z,1513241475.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:15.625Z,1513241475.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:15.639Z,1513241475.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:16.011Z,1513241476.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:16.082Z,1513241476.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:16.086Z,1513241476.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:16.410Z,1513241476.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:16.436Z,1513241476.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:16.871Z,1513241476.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:16.882Z,1513241476.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:16.935Z,1513241476.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:17.212Z,1513241477.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:17.244Z,1513241477.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:17.285Z,1513241477.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:17.634Z,1513241477.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:17.649Z,1513241477.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:18.027Z,1513241478.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:18.056Z,1513241478.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:18.082Z,1513241478.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:18.433Z,1513241478.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:18.448Z,1513241478.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:18.871Z,1513241478.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:18.878Z,1513241478.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:18.898Z,1513241478.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:19.211Z,1513241479.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:19.248Z,1513241479.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:19.281Z,1513241479.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:19.611Z,1513241479.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:19.642Z,1513241479.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:20.078Z,1513241480.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:20.100Z,1513241480.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:20.160Z,1513241480.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:20.510Z,1513241480.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:20.590Z,1513241480.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:20.843Z,1513241480.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:20.873Z,1513241480.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:20.878Z,1513241480.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:21.275Z,1513241481.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:21.277Z,1513241481.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:21.312Z,1513241481.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:21.626Z,1513241481.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:21.679Z,1513241481.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:22.019Z,1513241482.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:22.063Z,1513241482.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:22.098Z,1513241482.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:22.474Z,1513241482.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:22.544Z,1513241482.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:22.822Z,1513241482.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:22.839Z,1513241482.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:22.894Z,1513241482.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:23.225Z,1513241483.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:23.257Z,1513241483.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:23.298Z,1513241483.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:23.634Z,1513241483.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:23.648Z,1513241483.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:24.038Z,1513241484.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:24.094Z,1513241484.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:24.064Z,1513241484.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:24.463Z,1513241484.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:24.555Z,1513241484.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:24.812Z,1513241484.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:24.874Z,1513241484.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:24.889Z,1513241484.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:25.220Z,1513241485.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:25.272Z,1513241485.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:25.297Z,1513241485.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:25.618Z,1513241485.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:25.685Z,1513241485.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:26.050Z,1513241486.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:26.080Z,1513241486.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:26.098Z,1513241486.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:26.495Z,1513241486.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:26.542Z,1513241486.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:26.851Z,1513241486.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:26.893Z,1513241486.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:26.935Z,1513241486.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:27.238Z,1513241487.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:27.286Z,1513241487.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:27.298Z,1513241487.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:27.612Z,1513241487.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:27.683Z,1513241487.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:28.030Z,1513241488.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:28.090Z,1513241488.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:28.094Z,1513241488.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:28.413Z,1513241488.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:28.463Z,1513241488.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:28.822Z,1513241488.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:28.890Z,1513241488.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:28.923Z,1513241488.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:29.220Z,1513241489.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:29.251Z,1513241489.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:29.294Z,1513241489.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:29.652Z,1513241489.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:29.696Z,1513241489.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:30.036Z,1513241490.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:30.055Z,1513241490.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:30.090Z,1513241490.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:30.432Z,1513241490.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:30.459Z,1513241490.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:30.852Z,1513241490.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:30.885Z,1513241490.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:30.899Z,1513241490.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:31.209Z,1513241491.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:31.262Z,1513241491.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:31.289Z,1513241491.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:31.636Z,1513241491.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:31.652Z,1513241491.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:32.026Z,1513241492.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:32.049Z,1513241492.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:32.086Z,1513241492.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:32.461Z,1513241492.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:32.503Z,1513241492.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:32.876Z,1513241492.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:32.881Z,1513241492.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:32.960Z,1513241492.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:33.235Z,1513241493.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:33.268Z,1513241493.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:33.285Z,1513241493.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:33.611Z,1513241493.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:33.628Z,1513241493.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:34.052Z,1513241494.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:34.068Z,1513241494.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:34.114Z,1513241494.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:34.483Z,1513241494.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:34.544Z,1513241494.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:34.838Z,1513241494.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:34.852Z,1513241494.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:34.910Z,1513241494.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:35.238Z,1513241495.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:35.314Z,1513241495.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:35.343Z,1513241495.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:35.623Z,1513241495.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:35.683Z,1513241495.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:36.022Z,1513241496.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:36.051Z,1513241496.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:36.110Z,1513241496.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:36.422Z,1513241496.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:36.525Z,1513241496.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:36.813Z,1513241496.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:36.839Z,1513241496.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:36.906Z,1513241496.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:37.212Z,1513241497.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:37.264Z,1513241497.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:37.309Z,1513241497.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:37.654Z,1513241497.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:37.755Z,1513241497.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:38.036Z,1513241498.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:38.105Z,1513241498.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:38.108Z,1513241498.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:38.476Z,1513241498.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:38.558Z,1513241498.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:38.822Z,1513241498.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:38.887Z,1513241498.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:38.894Z,1513241498.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:39.212Z,1513241499.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:39.251Z,1513241499.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:39.621Z,1513241499.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:39.690Z,1513241499.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:39.694Z,1513241499.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:40.012Z,1513241500.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:40.036Z,1513241500.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:40.486Z,1513241500.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:40.502Z,1513241500.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:40.551Z,1513241500.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:40.834Z,1513241500.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:40.860Z,1513241500.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:40.921Z,1513241500.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:41.240Z,1513241501.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:41.288Z,1513241501.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:41.612Z,1513241501.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:41.643Z,1513241501.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:41.718Z,1513241501.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:42.013Z,1513241502.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:42.055Z,1513241502.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:42.412Z,1513241502.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:42.450Z,1513241502.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:42.515Z,1513241502.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:42.832Z,1513241502.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:42.874Z,1513241502.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:42.962Z,1513241502.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:43.221Z,1513241503.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:43.236Z,1513241503.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:43.623Z,1513241503.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:43.647Z,1513241503.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:43.759Z,1513241503.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:44.066Z,1513241504.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:44.094Z,1513241504.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:44.432Z,1513241504.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:44.459Z,1513241504.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:44.554Z,1513241504.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:44.842Z,1513241504.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:44.877Z,1513241504.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:45.211Z,1513241505.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:45.275Z,1513241505.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:45.278Z,1513241505.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:45.613Z,1513241505.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:45.671Z,1513241505.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:46.012Z,1513241506.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:46.052Z,1513241506.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:46.081Z,1513241506.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:46.447Z,1513241506.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:46.470Z,1513241506.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:46.849Z,1513241506.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:46.878Z,1513241506.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:46.906Z,1513241506.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:47.224Z,1513241507.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:47.263Z,1513241507.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:47.282Z,1513241507.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:47.620Z,1513241507.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:47.643Z,1513241507.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:48.022Z,1513241508.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:48.078Z,1513241508.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:48.092Z,1513241508.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:48.542Z,1513241508.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:48.622Z,1513241508.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:48.849Z,1513241508.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:48.864Z,1513241508.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:48.874Z,1513241508.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:49.238Z,1513241509.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:49.252Z,1513241509.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:49.277Z,1513241509.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:49.617Z,1513241509.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:49.653Z,1513241509.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:50.012Z,1513241510.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:50.031Z,1513241510.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:50.074Z,1513241510.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:50.416Z,1513241510.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:50.531Z,1513241510.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:50.823Z,1513241510.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:50.838Z,1513241510.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:50.869Z,1513241510.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:51.224Z,1513241511.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:51.243Z,1513241511.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:51.273Z,1513241511.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:51.629Z,1513241511.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:51.643Z,1513241511.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:52.028Z,1513241512.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:52.043Z,1513241512.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:52.070Z,1513241512.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:52.452Z,1513241512.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:52.508Z,1513241512.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:52.824Z,1513241512.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:52.839Z,1513241512.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:52.866Z,1513241512.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:53.211Z,1513241513.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:53.238Z,1513241513.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:53.269Z,1513241513.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:53.628Z,1513241513.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:53.645Z,1513241513.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:54.025Z,1513241514.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:54.040Z,1513241514.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:54.066Z,1513241514.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:54.435Z,1513241514.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:54.499Z,1513241514.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:54.833Z,1513241514.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:54.862Z,1513241514.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:54.891Z,1513241514.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:55.241Z,1513241515.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:55.260Z,1513241515.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:55.611Z,1513241515.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:55.651Z,1513241515.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:55.658Z,1513241515.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:56.015Z,1513241516.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:56.043Z,1513241516.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:56.415Z,1513241516.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:56.453Z,1513241516.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:56.455Z,1513241516.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:56.813Z,1513241516.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:56.828Z,1513241516.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:57.215Z,1513241517.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:57.250Z,1513241517.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:57.252Z,1513241517.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:57.629Z,1513241517.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:57.663Z,1513241517.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:58.035Z,1513241518.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:58.045Z,1513241518.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:58.070Z,1513241518.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:58.434Z,1513241518.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:58.463Z,1513241518.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:58.842Z,1513241518.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:58.843Z,1513241518.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:58.875Z,1513241518.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:59.218Z,1513241519.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:59.239Z,1513241519.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:51:59.624Z,1513241519.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:59.637Z,1513241519.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:51:59.644Z,1513241519.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:00.020Z,1513241520.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:00.089Z,1513241520.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:00.434Z,1513241520.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:00.435Z,1513241520.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:00.450Z,1513241520.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:00.853Z,1513241520.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:00.879Z,1513241520.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:01.231Z,1513241521.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:01.246Z,1513241521.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:01.303Z,1513241521.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:01.619Z,1513241521.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:01.650Z,1513241521.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:02.021Z,1513241522.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:02.026Z,1513241522.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:02.079Z,1513241522.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:02.444Z,1513241522.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:02.497Z,1513241522.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:02.821Z,1513241522.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:02.895Z,1513241522.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:02.910Z,1513241522.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:03.230Z,1513241523.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:03.255Z,1513241523.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:03.618Z,1513241523.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:03.625Z,1513241523.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:03.659Z,1513241523.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:04.016Z,1513241524.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:04.035Z,1513241524.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:04.414Z,1513241524.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:04.449Z,1513241524.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:04.519Z,1513241524.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:04.820Z,1513241524.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:04.843Z,1513241524.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:05.210Z,1513241525.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:05.228Z,1513241525.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:05.243Z,1513241525.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:05.628Z,1513241525.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:05.643Z,1513241525.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:06.013Z,1513241526.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:06.031Z,1513241526.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:06.045Z,1513241526.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:06.431Z,1513241526.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:06.500Z,1513241526.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:06.811Z,1513241526.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:06.813Z,1513241526.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:06.847Z,1513241526.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:07.217Z,1513241527.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:07.241Z,1513241527.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:07.606Z,1513241527.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:07.626Z,1513241527.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:07.640Z,1513241527.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:08.017Z,1513241528.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:08.039Z,1513241528.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:08.401Z,1513241528.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:08.445Z,1513241528.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:08.499Z,1513241528.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:08.831Z,1513241528.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:08.850Z,1513241528.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:09.197Z,1513241529.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:09.246Z,1513241529.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:09.310Z,1513241529.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:09.609Z,1513241529.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:09.645Z,1513241529.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:09.994Z,1513241529.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:10.010Z,1513241530.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:10.041Z,1513241530.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:10.411Z,1513241530.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:10.452Z,1513241530.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:10.789Z,1513241530.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:11.536Z,1513241531.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:11.946Z,1513241531.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:12.349Z,1513241532.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:12.754Z,1513241532.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:13.157Z,1513241533.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:13.561Z,1513241533.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:13.966Z,1513241533.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.354Z,1513241534.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.369Z,1513241534.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.372Z,1513241534.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:14.473Z,1513241534.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.512Z,1513241534.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:14.775Z,1513241534.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.880Z,1513241534.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:14.911Z,1513241534.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:15.186Z,1513241535.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:15.270Z,1513241535.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:15.291Z,1513241535.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:15.589Z,1513241535.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:15.667Z,1513241535.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:15.682Z,1513241535.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:16.043Z,1513241536.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:16.070Z,1513241536.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:16.386Z,1513241536.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:16.501Z,1513241536.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:16.568Z,1513241536.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:16.850Z,1513241536.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:16.880Z,1513241536.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:16.922Z,1513241536.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:17.253Z,1513241537.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:17.280Z,1513241537.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:17.659Z,1513241537.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:17.718Z,1513241537.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:17.734Z,1513241537.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:18.059Z,1513241538.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:18.075Z,1513241538.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:18.514Z,1513241538.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:18.518Z,1513241538.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:18.537Z,1513241538.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:18.847Z,1513241538.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:18.874Z,1513241538.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:18.917Z,1513241538.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:19.243Z,1513241539.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:19.270Z,1513241539.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:19.644Z,1513241539.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:19.670Z,1513241539.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:19.714Z,1513241539.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:20.044Z,1513241540.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:20.072Z,1513241540.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:20.510Z,1513241540.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:20.522Z,1513241540.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:20.570Z,1513241540.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:20.861Z,1513241540.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:20.891Z,1513241540.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:20.913Z,1513241540.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:21.290Z,1513241541.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:21.311Z,1513241541.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:21.651Z,1513241541.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:21.688Z,1513241541.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:21.710Z,1513241541.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:22.050Z,1513241542.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:22.113Z,1513241542.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:22.506Z,1513241542.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:22.513Z,1513241542.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:22.575Z,1513241542.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:22.848Z,1513241542.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:22.872Z,1513241542.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:22.910Z,1513241542.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:23.249Z,1513241543.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:23.264Z,1513241543.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:23.668Z,1513241543.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:23.706Z,1513241543.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:23.722Z,1513241543.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:24.058Z,1513241544.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:24.072Z,1513241544.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:24.469Z,1513241544.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:24.502Z,1513241544.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:24.597Z,1513241544.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:24.855Z,1513241544.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:24.874Z,1513241544.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:24.945Z,1513241544.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:25.250Z,1513241545.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:25.266Z,1513241545.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:25.650Z,1513241545.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:25.665Z,1513241545.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:25.741Z,1513241545.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:26.055Z,1513241546.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:26.070Z,1513241546.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:26.461Z,1513241546.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:26.476Z,1513241546.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:26.539Z,1513241546.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:26.898Z,1513241546.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:26.934Z,1513241546.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:27.238Z,1513241547.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:27.266Z,1513241547.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:27.289Z,1513241547.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:27.644Z,1513241547.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:27.671Z,1513241547.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:28.034Z,1513241548.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:28.044Z,1513241548.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:28.072Z,1513241548.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:28.444Z,1513241548.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:28.475Z,1513241548.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:28.829Z,1513241548.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:28.871Z,1513241548.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:28.907Z,1513241548.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:29.233Z,1513241549.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:29.252Z,1513241549.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:29.267Z,1513241549.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:29.662Z,1513241549.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:29.697Z,1513241549.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:30.030Z,1513241550.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:30.106Z,1513241550.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:30.148Z,1513241550.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:30.543Z,1513241550.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:30.588Z,1513241550.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:30.825Z,1513241550.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:30.846Z,1513241550.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:30.861Z,1513241550.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:31.230Z,1513241551.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:31.245Z,1513241551.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:31.260Z,1513241551.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:31.649Z,1513241551.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:31.679Z,1513241551.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:32.025Z,1513241552.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:32.054Z,1513241552.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:32.078Z,1513241552.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:32.520Z,1513241552.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:32.543Z,1513241552.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:32.821Z,1513241552.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:32.878Z,1513241552.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:32.926Z,1513241552.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:33.225Z,1513241553.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:33.294Z,1513241553.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:33.327Z,1513241553.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:33.664Z,1513241553.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:33.680Z,1513241553.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:34.021Z,1513241554.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:34.052Z,1513241554.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:34.083Z,1513241554.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:34.519Z,1513241554.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:34.546Z,1513241554.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:34.817Z,1513241554.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:34.847Z,1513241554.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:34.882Z,1513241554.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:35.221Z,1513241555.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:35.264Z,1513241555.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:35.283Z,1513241555.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:35.663Z,1513241555.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:35.678Z,1513241555.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:36.018Z,1513241556.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:36.068Z,1513241556.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:36.091Z,1513241556.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:36.544Z,1513241556.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:36.583Z,1513241556.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:36.821Z,1513241556.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:36.860Z,1513241556.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:36.888Z,1513241556.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:37.225Z,1513241557.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:37.250Z,1513241557.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:37.277Z,1513241557.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:37.654Z,1513241557.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:37.668Z,1513241557.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:38.021Z,1513241558.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:38.053Z,1513241558.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:38.068Z,1513241558.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:38.457Z,1513241558.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:38.499Z,1513241558.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:38.817Z,1513241558.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:38.865Z,1513241558.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:38.892Z,1513241558.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:39.221Z,1513241559.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:39.271Z,1513241559.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:39.287Z,1513241559.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:39.647Z,1513241559.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:39.678Z,1513241559.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:40.018Z,1513241560.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:40.042Z,1513241560.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:40.081Z,1513241560.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:40.446Z,1513241560.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:40.480Z,1513241560.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:40.826Z,1513241560.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:40.903Z,1513241560.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:40.928Z,1513241560.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:41.233Z,1513241561.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:41.244Z,1513241561.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:41.280Z,1513241561.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:41.653Z,1513241561.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:41.695Z,1513241561.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:42.030Z,1513241562.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:42.058Z,1513241562.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:42.087Z,1513241562.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:42.469Z,1513241562.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:42.484Z,1513241562.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:42.827Z,1513241562.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:42.899Z,1513241562.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:42.991Z,1513241562.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:43.229Z,1513241563.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:43.255Z,1513241563.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:43.271Z,1513241563.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:43.653Z,1513241563.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:43.668Z,1513241563.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:44.026Z,1513241564.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:44.051Z,1513241564.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:44.066Z,1513241564.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:44.519Z,1513241564.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:44.587Z,1513241564.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:44.821Z,1513241564.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:44.867Z,1513241564.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:44.898Z,1513241564.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:45.225Z,1513241565.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:45.270Z,1513241565.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:45.304Z,1513241565.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:45.651Z,1513241565.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:45.684Z,1513241565.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:46.021Z,1513241566.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:46.051Z,1513241566.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:46.077Z,1513241566.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:46.512Z,1513241566.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:46.551Z,1513241566.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:46.817Z,1513241566.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:46.856Z,1513241566.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:46.887Z,1513241566.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:47.221Z,1513241567.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:47.251Z,1513241567.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:47.311Z,1513241567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:47.665Z,1513241567.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:47.690Z,1513241567.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:48.018Z,1513241568.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:48.070Z,1513241568.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:48.095Z,1513241568.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:48.519Z,1513241568.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:48.539Z,1513241568.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:48.822Z,1513241568.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:48.850Z,1513241568.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:48.871Z,1513241568.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:49.286Z,1513241569.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:49.317Z,1513241569.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:49.618Z,1513241569.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:49.654Z,1513241569.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:49.675Z,1513241569.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:50.050Z,1513241570.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:50.065Z,1513241570.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:50.444Z,1513241570.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:50.516Z,1513241570.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:50.555Z,1513241570.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:50.870Z,1513241570.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:50.885Z,1513241570.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:50.893Z,1513241570.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:51.252Z,1513241571.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:51.283Z,1513241571.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:51.647Z,1513241571.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:51.679Z,1513241571.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:51.690Z,1513241571.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:52.042Z,1513241572.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:52.078Z,1513241572.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:52.487Z,1513241572.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:52.531Z,1513241572.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:52.603Z,1513241572.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:52.850Z,1513241572.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:52.885Z,1513241572.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:52.953Z,1513241572.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:53.246Z,1513241573.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:53.260Z,1513241573.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:53.657Z,1513241573.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:53.684Z,1513241573.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:53.749Z,1513241573.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:54.065Z,1513241574.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:54.089Z,1513241574.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:54.458Z,1513241574.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:54.472Z,1513241574.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:54.545Z,1513241574.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:54.871Z,1513241574.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:54.903Z,1513241574.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:55.214Z,1513241575.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:55.251Z,1513241575.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:55.272Z,1513241575.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:55.653Z,1513241575.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:55.703Z,1513241575.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:56.009Z,1513241576.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:56.054Z,1513241576.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:56.073Z,1513241576.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:56.467Z,1513241576.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:56.487Z,1513241576.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:56.809Z,1513241576.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:56.898Z,1513241576.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:56.919Z,1513241576.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:57.233Z,1513241577.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:57.262Z,1513241577.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:57.290Z,1513241577.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:57.643Z,1513241577.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:57.667Z,1513241577.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:58.033Z,1513241578.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:58.043Z,1513241578.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:58.071Z,1513241578.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:58.522Z,1513241578.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:58.541Z,1513241578.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:58.829Z,1513241578.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:58.889Z,1513241578.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:58.924Z,1513241578.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:59.233Z,1513241579.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:59.244Z,1513241579.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:59.279Z,1513241579.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:52:59.653Z,1513241579.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:52:59.681Z,1513241579.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:00.030Z,1513241580.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:00.069Z,1513241580.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:00.085Z,1513241580.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:00.523Z,1513241580.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:00.545Z,1513241580.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:00.832Z,1513241580.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:00.843Z,1513241580.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:00.866Z,1513241580.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:01.240Z,1513241581.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:01.244Z,1513241581.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:01.259Z,1513241581.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:01.648Z,1513241581.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:01.663Z,1513241581.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:02.040Z,1513241582.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:02.087Z,1513241582.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:02.114Z,1513241582.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:02.506Z,1513241582.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:02.546Z,1513241582.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:02.834Z,1513241582.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:02.865Z,1513241582.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:02.903Z,1513241582.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:03.237Z,1513241583.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:03.265Z,1513241583.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:03.292Z,1513241583.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:03.648Z,1513241583.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:03.667Z,1513241583.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:04.034Z,1513241584.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:04.049Z,1513241584.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:04.072Z,1513241584.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:04.512Z,1513241584.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:04.560Z,1513241584.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:04.829Z,1513241584.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:04.864Z,1513241584.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:04.882Z,1513241584.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:05.233Z,1513241585.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:05.303Z,1513241585.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:05.324Z,1513241585.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:05.659Z,1513241585.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:05.702Z,1513241585.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:06.030Z,1513241586.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:06.059Z,1513241586.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:06.087Z,1513241586.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:06.462Z,1513241586.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:06.549Z,1513241586.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:06.825Z,1513241586.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:06.846Z,1513241586.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:06.881Z,1513241586.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:07.232Z,1513241587.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:07.244Z,1513241587.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:07.268Z,1513241587.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:07.652Z,1513241587.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:07.734Z,1513241587.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:08.025Z,1513241588.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:08.047Z,1513241588.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:08.085Z,1513241588.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:08.454Z,1513241588.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:08.486Z,1513241588.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:08.824Z,1513241588.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:08.871Z,1513241588.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:08.907Z,1513241588.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:09.229Z,1513241589.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:09.267Z,1513241589.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:09.283Z,1513241589.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:09.641Z,1513241589.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:09.717Z,1513241589.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:10.026Z,1513241590.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:10.053Z,1513241590.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:10.080Z,1513241590.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:10.461Z,1513241590.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:10.476Z,1513241590.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:10.823Z,1513241590.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:11.229Z,1513241591.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:12.025Z,1513241592.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:12.821Z,1513241592.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:13.225Z,1513241593.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:13.994Z,1513241593.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.011Z,1513241594.011 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:53:14.011Z,1513241594.011 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:53:14.011Z,1513241594.011 [BPC1](ERROR): Communications Fault
2017-12-14T08:53:14.019Z,1513241594.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:14.019Z,1513241594.019 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167
2017-12-14T08:53:14.019Z,1513241594.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:53:14.022Z,1513241594.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.022Z,1513241594.022 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:14.023Z,1513241594.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 167
2017-12-14T08:53:14.023Z,1513241594.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:53:14.025Z,1513241594.025 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:14.025Z,1513241594.025 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167
2017-12-14T08:53:14.025Z,1513241594.025 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:53:14.037Z,1513241594.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:53:14.037Z,1513241594.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:53:14.037Z,1513241594.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:53:14.038Z,1513241594.038 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:53:14.131Z,1513241594.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.191Z,1513241594.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:53:14.191Z,1513241594.191 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167
2017-12-14T08:53:14.191Z,1513241594.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:53:14.191Z,1513241594.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 167
2017-12-14T08:53:14.192Z,1513241594.192 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:53:14.192Z,1513241594.192 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167
2017-12-14T08:53:14.519Z,1513241594.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.558Z,1513241594.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:53:14.558Z,1513241594.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:53:14.558Z,1513241594.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:53:14.559Z,1513241594.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:53:14.559Z,1513241594.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:53:14.560Z,1513241594.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:53:14.560Z,1513241594.560 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:53:14.560Z,1513241594.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:53:14.562Z,1513241594.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:53:14.817Z,1513241594.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.921Z,1513241594.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:14.955Z,1513241594.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:15.003Z,1513241595.003 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:53:15.003Z,1513241595.003 [BPC1] No Fault, FailCount= 1
2017-12-14T08:53:15.221Z,1513241595.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:15.304Z,1513241595.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:15.376Z,1513241595.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:15.678Z,1513241595.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:15.710Z,1513241595.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:16.017Z,1513241596.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:16.080Z,1513241596.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:16.107Z,1513241596.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:16.530Z,1513241596.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:16.559Z,1513241596.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:16.813Z,1513241596.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:16.884Z,1513241596.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:16.918Z,1513241596.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:17.217Z,1513241597.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:17.275Z,1513241597.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:17.312Z,1513241597.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:17.689Z,1513241597.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:17.715Z,1513241597.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:18.013Z,1513241598.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:18.085Z,1513241598.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:18.140Z,1513241598.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:18.528Z,1513241598.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:18.554Z,1513241598.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:18.809Z,1513241598.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:18.871Z,1513241598.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:18.907Z,1513241598.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:19.213Z,1513241599.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:19.270Z,1513241599.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:19.305Z,1513241599.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:19.675Z,1513241599.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:19.700Z,1513241599.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:20.010Z,1513241600.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:20.071Z,1513241600.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:20.095Z,1513241600.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:20.504Z,1513241600.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:20.580Z,1513241600.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:20.805Z,1513241600.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:20.898Z,1513241600.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:20.913Z,1513241600.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:21.209Z,1513241601.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:21.291Z,1513241601.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:21.323Z,1513241601.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:21.670Z,1513241601.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:21.702Z,1513241601.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:22.006Z,1513241602.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:22.076Z,1513241602.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:22.099Z,1513241602.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:22.476Z,1513241602.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:22.490Z,1513241602.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:22.803Z,1513241602.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:22.887Z,1513241602.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:22.910Z,1513241602.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:23.213Z,1513241603.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:23.279Z,1513241603.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:23.312Z,1513241603.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:23.689Z,1513241603.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:23.740Z,1513241603.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:24.010Z,1513241604.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:24.090Z,1513241604.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:24.116Z,1513241604.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:24.486Z,1513241604.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:24.555Z,1513241604.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:24.807Z,1513241604.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:24.892Z,1513241604.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:24.915Z,1513241604.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:25.217Z,1513241605.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:25.279Z,1513241605.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:25.294Z,1513241605.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:25.680Z,1513241605.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:25.695Z,1513241605.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:26.014Z,1513241606.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:26.079Z,1513241606.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:26.095Z,1513241606.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:26.534Z,1513241606.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:26.549Z,1513241606.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:26.809Z,1513241606.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:26.897Z,1513241606.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:26.920Z,1513241606.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:27.213Z,1513241607.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:27.289Z,1513241607.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:27.304Z,1513241607.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:27.710Z,1513241607.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:27.755Z,1513241607.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:28.010Z,1513241608.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:28.092Z,1513241608.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:28.122Z,1513241608.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:28.512Z,1513241608.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:28.543Z,1513241608.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:28.805Z,1513241608.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:28.875Z,1513241608.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:28.904Z,1513241608.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:29.209Z,1513241609.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:29.274Z,1513241609.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:29.307Z,1513241609.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:29.689Z,1513241609.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:29.703Z,1513241609.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:30.006Z,1513241610.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:30.090Z,1513241610.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:30.104Z,1513241610.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:30.517Z,1513241610.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:30.560Z,1513241610.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:30.801Z,1513241610.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:30.876Z,1513241610.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:30.903Z,1513241610.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:31.205Z,1513241611.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:31.275Z,1513241611.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:31.295Z,1513241611.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:31.679Z,1513241611.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:31.710Z,1513241611.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:32.002Z,1513241612.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:32.080Z,1513241612.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:32.106Z,1513241612.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:32.524Z,1513241612.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:32.539Z,1513241612.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:32.797Z,1513241612.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:32.887Z,1513241612.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:32.902Z,1513241612.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:33.201Z,1513241613.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:33.282Z,1513241613.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:33.296Z,1513241613.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:33.681Z,1513241613.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:33.703Z,1513241613.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:33.998Z,1513241613.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:34.080Z,1513241614.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:34.095Z,1513241614.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:34.572Z,1513241614.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:34.642Z,1513241614.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:34.793Z,1513241614.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:34.875Z,1513241614.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:34.898Z,1513241614.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:35.197Z,1513241615.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:35.286Z,1513241615.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:35.307Z,1513241615.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:35.686Z,1513241615.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:35.707Z,1513241615.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:35.994Z,1513241615.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:36.085Z,1513241616.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:36.136Z,1513241616.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:36.483Z,1513241616.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:36.499Z,1513241616.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:36.791Z,1513241616.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:36.879Z,1513241616.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:36.920Z,1513241616.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:37.225Z,1513241617.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:37.286Z,1513241617.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:37.300Z,1513241617.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:37.693Z,1513241617.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:37.719Z,1513241617.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:38.022Z,1513241618.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:38.099Z,1513241618.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:38.114Z,1513241618.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:38.492Z,1513241618.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:38.507Z,1513241618.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:38.819Z,1513241618.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:38.877Z,1513241618.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:38.908Z,1513241618.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:39.229Z,1513241619.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:39.274Z,1513241619.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:39.309Z,1513241619.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:39.671Z,1513241619.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:39.706Z,1513241619.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:40.026Z,1513241620.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:40.075Z,1513241620.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:40.105Z,1513241620.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:40.558Z,1513241620.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:40.609Z,1513241620.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:40.822Z,1513241620.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:40.913Z,1513241620.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:40.929Z,1513241620.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:41.225Z,1513241621.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:41.291Z,1513241621.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:41.313Z,1513241621.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:41.677Z,1513241621.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:41.692Z,1513241621.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:42.021Z,1513241622.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:42.082Z,1513241622.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:42.120Z,1513241622.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:42.519Z,1513241622.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:42.563Z,1513241622.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:42.817Z,1513241622.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:42.894Z,1513241622.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:42.917Z,1513241622.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:43.221Z,1513241623.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:43.282Z,1513241623.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:43.297Z,1513241623.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:43.678Z,1513241623.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:43.694Z,1513241623.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:44.018Z,1513241624.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:44.089Z,1513241624.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:44.105Z,1513241624.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:44.534Z,1513241624.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:44.548Z,1513241624.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:44.815Z,1513241624.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:44.884Z,1513241624.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:44.906Z,1513241624.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:45.221Z,1513241625.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:45.282Z,1513241625.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:45.331Z,1513241625.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:45.683Z,1513241625.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:45.697Z,1513241625.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:46.017Z,1513241626.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:46.084Z,1513241626.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:46.108Z,1513241626.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:46.528Z,1513241626.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:46.554Z,1513241626.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:46.814Z,1513241626.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:46.901Z,1513241626.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:46.921Z,1513241626.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:47.217Z,1513241627.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:47.291Z,1513241627.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:47.305Z,1513241627.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:47.672Z,1513241627.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:47.708Z,1513241627.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:48.013Z,1513241628.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:48.071Z,1513241628.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:48.108Z,1513241628.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:48.468Z,1513241628.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:48.560Z,1513241628.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:48.809Z,1513241628.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:48.894Z,1513241628.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:48.917Z,1513241628.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:49.213Z,1513241629.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:49.283Z,1513241629.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:49.317Z,1513241629.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:49.685Z,1513241629.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:49.724Z,1513241629.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:50.010Z,1513241630.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:50.119Z,1513241630.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:50.139Z,1513241630.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:50.481Z,1513241630.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:50.519Z,1513241630.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:50.807Z,1513241630.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:50.889Z,1513241630.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:50.916Z,1513241630.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:51.237Z,1513241631.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:51.283Z,1513241631.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:51.298Z,1513241631.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:51.679Z,1513241631.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:51.694Z,1513241631.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:52.034Z,1513241632.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:52.076Z,1513241632.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:52.100Z,1513241632.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:52.494Z,1513241632.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:52.525Z,1513241632.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:52.830Z,1513241632.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:52.887Z,1513241632.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:52.915Z,1513241632.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:53.233Z,1513241633.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:53.286Z,1513241633.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:53.303Z,1513241633.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:53.680Z,1513241633.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:53.696Z,1513241633.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:54.030Z,1513241634.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:54.083Z,1513241634.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:54.100Z,1513241634.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:54.523Z,1513241634.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:54.550Z,1513241634.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:54.825Z,1513241634.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:54.875Z,1513241634.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:54.914Z,1513241634.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:55.229Z,1513241635.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:55.278Z,1513241635.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:55.306Z,1513241635.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:55.693Z,1513241635.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:55.708Z,1513241635.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:56.026Z,1513241636.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:56.095Z,1513241636.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:56.162Z,1513241636.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:56.540Z,1513241636.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:56.555Z,1513241636.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:56.821Z,1513241636.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:56.871Z,1513241636.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:56.908Z,1513241636.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:57.226Z,1513241637.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:57.290Z,1513241637.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:57.362Z,1513241637.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:57.675Z,1513241637.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:57.713Z,1513241637.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:58.021Z,1513241638.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:58.075Z,1513241638.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:58.111Z,1513241638.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:58.518Z,1513241638.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:58.563Z,1513241638.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:58.817Z,1513241638.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:58.902Z,1513241638.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:58.925Z,1513241638.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:59.221Z,1513241639.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:59.290Z,1513241639.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:59.357Z,1513241639.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:53:59.677Z,1513241639.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:53:59.692Z,1513241639.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:00.018Z,1513241640.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:00.082Z,1513241640.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:00.096Z,1513241640.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:00.515Z,1513241640.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:00.542Z,1513241640.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:00.813Z,1513241640.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:00.891Z,1513241640.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:00.906Z,1513241640.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:01.217Z,1513241641.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:01.284Z,1513241641.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:01.300Z,1513241641.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:01.683Z,1513241641.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:01.704Z,1513241641.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:02.014Z,1513241642.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:02.090Z,1513241642.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:02.104Z,1513241642.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:02.539Z,1513241642.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:02.584Z,1513241642.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:02.811Z,1513241642.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:02.887Z,1513241642.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:02.914Z,1513241642.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:03.217Z,1513241643.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:03.285Z,1513241643.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:03.299Z,1513241643.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:03.671Z,1513241643.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:03.705Z,1513241643.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:04.013Z,1513241644.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:04.082Z,1513241644.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:04.103Z,1513241644.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:04.489Z,1513241644.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:04.511Z,1513241644.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:04.811Z,1513241644.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:04.891Z,1513241644.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:04.938Z,1513241644.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:05.261Z,1513241645.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:05.282Z,1513241645.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:05.296Z,1513241645.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:05.673Z,1513241645.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:05.688Z,1513241645.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:06.059Z,1513241646.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:06.072Z,1513241646.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:06.099Z,1513241646.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:06.475Z,1513241646.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:06.493Z,1513241646.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:06.853Z,1513241646.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:06.888Z,1513241646.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:06.915Z,1513241646.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:07.257Z,1513241647.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:07.287Z,1513241647.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:07.301Z,1513241647.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:07.690Z,1513241647.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:07.746Z,1513241647.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:08.054Z,1513241648.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:08.110Z,1513241648.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:08.186Z,1513241648.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:08.523Z,1513241648.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:08.561Z,1513241648.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:08.849Z,1513241648.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:08.881Z,1513241648.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:08.908Z,1513241648.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:09.253Z,1513241649.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:09.279Z,1513241649.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:09.306Z,1513241649.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:09.721Z,1513241649.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:09.735Z,1513241649.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:10.049Z,1513241650.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:10.072Z,1513241650.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:10.103Z,1513241650.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:10.534Z,1513241650.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:10.554Z,1513241650.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:10.845Z,1513241650.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:11.249Z,1513241651.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:12.046Z,1513241652.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:12.841Z,1513241652.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:13.245Z,1513241653.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:13.901Z,1513241653.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:13.924Z,1513241653.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:14.034Z,1513241654.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:14.042Z,1513241654.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:14.065Z,1513241654.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:14.408Z,1513241654.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:14.461Z,1513241654.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:14.819Z,1513241654.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:14.834Z,1513241654.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:14.837Z,1513241654.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:15.206Z,1513241655.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:15.221Z,1513241655.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:15.241Z,1513241655.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:15.617Z,1513241655.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:15.632Z,1513241655.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:16.019Z,1513241656.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:16.033Z,1513241656.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:16.038Z,1513241656.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:16.415Z,1513241656.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:16.431Z,1513241656.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:16.810Z,1513241656.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:16.833Z,1513241656.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:16.842Z,1513241656.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:17.202Z,1513241657.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:17.216Z,1513241657.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:17.237Z,1513241657.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:17.606Z,1513241657.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:17.621Z,1513241657.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:18.001Z,1513241658.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:18.016Z,1513241658.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:18.034Z,1513241658.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:18.410Z,1513241658.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:18.463Z,1513241658.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:18.829Z,1513241658.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:18.875Z,1513241658.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:18.907Z,1513241658.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:19.229Z,1513241659.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:19.237Z,1513241659.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:19.262Z,1513241659.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:19.595Z,1513241659.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:19.622Z,1513241659.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:19.993Z,1513241659.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:20.024Z,1513241660.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:20.034Z,1513241660.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:20.414Z,1513241660.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:20.436Z,1513241660.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:20.830Z,1513241660.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:20.867Z,1513241660.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:20.899Z,1513241660.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:21.213Z,1513241661.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:21.243Z,1513241661.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:21.245Z,1513241661.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:21.606Z,1513241661.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:21.634Z,1513241661.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:22.002Z,1513241662.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:22.016Z,1513241662.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:22.042Z,1513241662.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:22.464Z,1513241662.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:22.754Z,1513241662.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:22.838Z,1513241662.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:22.871Z,1513241662.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:22.879Z,1513241662.879 [BPC1](ERROR): Failed to receive battery data
2017-12-14T08:54:22.879Z,1513241662.879 [BPC1] Communications Fault, FailCount= 1
2017-12-14T08:54:22.879Z,1513241662.879 [BPC1](ERROR): Communications Fault
2017-12-14T08:54:22.911Z,1513241662.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:22.945Z,1513241662.945 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T08:54:23.240Z,1513241663.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:23.241Z,1513241663.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:23.271Z,1513241663.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:23.632Z,1513241663.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:23.647Z,1513241663.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:24.028Z,1513241664.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:24.038Z,1513241664.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:24.045Z,1513241664.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:24.083Z,1513241664.083 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T08:54:24.083Z,1513241664.083 [BPC1] No Fault, FailCount= 1
2017-12-14T08:54:24.446Z,1513241664.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:24.579Z,1513241664.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:24.834Z,1513241664.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:24.837Z,1513241664.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:24.852Z,1513241664.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:25.227Z,1513241665.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:25.237Z,1513241665.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:25.258Z,1513241665.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:25.642Z,1513241665.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:25.657Z,1513241665.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:26.035Z,1513241666.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:26.044Z,1513241666.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:26.087Z,1513241666.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:26.478Z,1513241666.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:26.528Z,1513241666.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:26.830Z,1513241666.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:26.833Z,1513241666.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:26.848Z,1513241666.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:27.229Z,1513241667.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:27.233Z,1513241667.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:27.246Z,1513241667.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:27.631Z,1513241667.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:27.651Z,1513241667.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:28.023Z,1513241668.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:28.030Z,1513241668.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:28.062Z,1513241668.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:28.466Z,1513241668.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:28.529Z,1513241668.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:28.825Z,1513241668.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:28.844Z,1513241668.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:28.860Z,1513241668.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:29.230Z,1513241669.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:29.243Z,1513241669.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:29.257Z,1513241669.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:29.627Z,1513241669.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:29.642Z,1513241669.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:30.026Z,1513241670.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:30.030Z,1513241670.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:30.053Z,1513241670.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:30.435Z,1513241670.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:30.450Z,1513241670.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:30.822Z,1513241670.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:30.826Z,1513241670.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:30.853Z,1513241670.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:31.222Z,1513241671.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:31.225Z,1513241671.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:31.263Z,1513241671.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:31.637Z,1513241671.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:31.666Z,1513241671.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:32.022Z,1513241672.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:32.042Z,1513241672.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:32.071Z,1513241672.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:32.434Z,1513241672.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:32.464Z,1513241672.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:32.819Z,1513241672.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:32.870Z,1513241672.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:32.930Z,1513241672.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:33.228Z,1513241673.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:33.229Z,1513241673.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:33.258Z,1513241673.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:33.634Z,1513241673.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:33.655Z,1513241673.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:34.026Z,1513241674.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:34.035Z,1513241674.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:34.062Z,1513241674.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:34.438Z,1513241674.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:34.453Z,1513241674.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:34.823Z,1513241674.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:34.867Z,1513241674.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:34.898Z,1513241674.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:35.237Z,1513241675.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:35.240Z,1513241675.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:35.269Z,1513241675.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:35.623Z,1513241675.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:35.655Z,1513241675.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:36.030Z,1513241676.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:36.042Z,1513241676.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:36.061Z,1513241676.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:36.460Z,1513241676.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:36.530Z,1513241676.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:36.827Z,1513241676.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:36.838Z,1513241676.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:36.862Z,1513241676.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:37.230Z,1513241677.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:37.241Z,1513241677.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:37.248Z,1513241677.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:37.641Z,1513241677.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:37.668Z,1513241677.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:38.039Z,1513241678.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:38.041Z,1513241678.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:38.056Z,1513241678.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:38.450Z,1513241678.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:38.536Z,1513241678.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:38.831Z,1513241678.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:38.833Z,1513241678.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:38.921Z,1513241678.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:39.234Z,1513241679.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:39.237Z,1513241679.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:39.259Z,1513241679.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:39.630Z,1513241679.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:39.657Z,1513241679.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:40.034Z,1513241680.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:40.035Z,1513241680.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:40.065Z,1513241680.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:40.471Z,1513241680.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:40.516Z,1513241680.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:40.829Z,1513241680.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:40.859Z,1513241680.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:40.882Z,1513241680.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:41.233Z,1513241681.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:41.252Z,1513241681.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:41.266Z,1513241681.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:41.631Z,1513241681.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:41.667Z,1513241681.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:42.032Z,1513241682.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:42.035Z,1513241682.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:42.073Z,1513241682.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:42.443Z,1513241682.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:42.512Z,1513241682.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:42.828Z,1513241682.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:42.833Z,1513241682.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:42.848Z,1513241682.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:43.233Z,1513241683.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:43.234Z,1513241683.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:43.298Z,1513241683.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:43.644Z,1513241683.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:43.696Z,1513241683.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:44.030Z,1513241684.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:44.047Z,1513241684.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:44.062Z,1513241684.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:44.442Z,1513241684.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:44.458Z,1513241684.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:44.826Z,1513241684.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:44.849Z,1513241684.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:44.899Z,1513241684.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:45.229Z,1513241685.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:45.240Z,1513241685.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:45.266Z,1513241685.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:45.632Z,1513241685.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:45.672Z,1513241685.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:46.026Z,1513241686.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:46.030Z,1513241686.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:46.069Z,1513241686.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:46.430Z,1513241686.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:46.458Z,1513241686.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:46.823Z,1513241686.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:46.872Z,1513241686.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:46.902Z,1513241686.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:47.229Z,1513241687.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:47.246Z,1513241687.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:47.279Z,1513241687.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:47.622Z,1513241687.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:47.649Z,1513241687.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:48.026Z,1513241688.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:48.044Z,1513241688.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:48.079Z,1513241688.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:48.431Z,1513241688.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:48.445Z,1513241688.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:48.823Z,1513241688.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:48.899Z,1513241688.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:48.936Z,1513241688.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:49.234Z,1513241689.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:49.249Z,1513241689.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:49.254Z,1513241689.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:49.641Z,1513241689.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:49.656Z,1513241689.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:50.041Z,1513241690.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:50.050Z,1513241690.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:50.057Z,1513241690.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:50.479Z,1513241690.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:50.541Z,1513241690.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:50.833Z,1513241690.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:50.845Z,1513241690.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:50.850Z,1513241690.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:51.250Z,1513241691.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:51.255Z,1513241691.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:51.286Z,1513241691.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:51.623Z,1513241691.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:51.648Z,1513241691.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:52.022Z,1513241692.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:52.046Z,1513241692.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:52.049Z,1513241692.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:52.449Z,1513241692.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:52.515Z,1513241692.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:52.838Z,1513241692.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:52.842Z,1513241692.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:52.880Z,1513241692.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:53.241Z,1513241693.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:53.245Z,1513241693.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:53.268Z,1513241693.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:53.621Z,1513241693.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:53.636Z,1513241693.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:54.031Z,1513241694.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:54.042Z,1513241694.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:54.091Z,1513241694.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:54.515Z,1513241694.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:54.580Z,1513241694.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:54.829Z,1513241694.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:54.837Z,1513241694.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:54.847Z,1513241694.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:55.229Z,1513241695.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:55.241Z,1513241695.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:55.248Z,1513241695.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:55.639Z,1513241695.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:55.680Z,1513241695.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:56.038Z,1513241696.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:56.044Z,1513241696.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:56.078Z,1513241696.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:56.456Z,1513241696.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:56.514Z,1513241696.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:56.830Z,1513241696.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:56.834Z,1513241696.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:56.856Z,1513241696.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:57.231Z,1513241697.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:57.237Z,1513241697.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:57.248Z,1513241697.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:57.637Z,1513241697.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:57.653Z,1513241697.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:58.032Z,1513241698.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:58.034Z,1513241698.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:58.051Z,1513241698.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:58.436Z,1513241698.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:58.453Z,1513241698.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:58.832Z,1513241698.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:58.847Z,1513241698.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:58.887Z,1513241698.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:59.245Z,1513241699.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:59.249Z,1513241699.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:59.271Z,1513241699.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:54:59.616Z,1513241699.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:54:59.631Z,1513241699.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:00.030Z,1513241700.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:00.050Z,1513241700.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:00.069Z,1513241700.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:00.423Z,1513241700.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:00.459Z,1513241700.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:00.845Z,1513241700.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:00.885Z,1513241700.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:00.969Z,1513241700.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:01.229Z,1513241701.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:01.244Z,1513241701.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:01.273Z,1513241701.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:01.642Z,1513241701.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:01.674Z,1513241701.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:02.046Z,1513241702.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:02.069Z,1513241702.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:02.076Z,1513241702.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:02.441Z,1513241702.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:02.473Z,1513241702.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:02.863Z,1513241702.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:02.866Z,1513241702.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:02.894Z,1513241702.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:03.223Z,1513241703.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:03.255Z,1513241703.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:03.269Z,1513241703.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:03.627Z,1513241703.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:03.652Z,1513241703.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:04.027Z,1513241704.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:04.052Z,1513241704.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:04.066Z,1513241704.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:04.451Z,1513241704.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:04.547Z,1513241704.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:04.841Z,1513241704.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:04.862Z,1513241704.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:04.903Z,1513241704.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:05.245Z,1513241705.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:05.265Z,1513241705.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:05.279Z,1513241705.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:05.632Z,1513241705.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:05.648Z,1513241705.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:06.028Z,1513241706.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:06.062Z,1513241706.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:06.082Z,1513241706.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:06.480Z,1513241706.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:06.531Z,1513241706.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:06.834Z,1513241706.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:06.868Z,1513241706.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:06.883Z,1513241706.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:07.252Z,1513241707.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:07.274Z,1513241707.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:07.289Z,1513241707.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:07.654Z,1513241707.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:07.684Z,1513241707.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:08.041Z,1513241708.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:08.056Z,1513241708.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:08.070Z,1513241708.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:08.492Z,1513241708.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:08.538Z,1513241708.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:08.823Z,1513241708.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:08.849Z,1513241708.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:08.869Z,1513241708.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:09.224Z,1513241709.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:09.255Z,1513241709.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:09.273Z,1513241709.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:09.628Z,1513241709.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:09.654Z,1513241709.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:10.026Z,1513241710.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:10.054Z,1513241710.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:10.057Z,1513241710.057 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T08:55:10.057Z,1513241710.057 [Default:CheckIn:C.Wait] Stopped
2017-12-14T08:55:10.057Z,1513241710.057 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T08:55:10.057Z,1513241710.057 [Default:CheckIn:D] Running Loop=1
2017-12-14T08:55:10.070Z,1513241710.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:10.461Z,1513241710.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:10.536Z,1513241710.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:10.552Z,1513241710.552 [Default:CheckIn:D] Stopped
2017-12-14T08:55:10.552Z,1513241710.552 [Default:CheckIn:E] Running Loop=1
2017-12-14T08:55:10.840Z,1513241710.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:10.863Z,1513241710.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:10.881Z,1513241710.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:10.890Z,1513241710.890 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 501.919368 min 
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn:E] Stopped
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn] Stopped
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn](INFO): Running loop #49
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn] Running Loop=49
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T08:55:10.891Z,1513241710.891 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T08:55:11.285Z,1513241711.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:12.081Z,1513241712.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:12.877Z,1513241712.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:13.281Z,1513241713.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:14.078Z,1513241714.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:14.162Z,1513241714.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:14.185Z,1513241714.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:14.290Z,1513241714.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:14.339Z,1513241714.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:14.651Z,1513241714.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:14.694Z,1513241714.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:14.876Z,1513241714.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:15.054Z,1513241715.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:15.099Z,1513241715.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:15.281Z,1513241715.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:15.448Z,1513241715.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:15.468Z,1513241715.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:15.850Z,1513241715.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:15.864Z,1513241715.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:16.077Z,1513241716.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:16.251Z,1513241716.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:16.266Z,1513241716.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:16.644Z,1513241716.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:16.659Z,1513241716.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:16.874Z,1513241716.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:17.040Z,1513241717.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:17.056Z,1513241717.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:17.293Z,1513241717.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:17.439Z,1513241717.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:17.456Z,1513241717.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:17.842Z,1513241717.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:17.862Z,1513241717.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:18.090Z,1513241718.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:18.240Z,1513241718.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:18.255Z,1513241718.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:18.647Z,1513241718.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:18.667Z,1513241718.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:18.873Z,1513241718.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:19.049Z,1513241719.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:19.068Z,1513241719.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:19.452Z,1513241719.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:19.472Z,1513241719.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:19.670Z,1513241719.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:19.838Z,1513241719.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:19.860Z,1513241719.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:20.228Z,1513241720.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:20.265Z,1513241720.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:20.470Z,1513241720.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:20.652Z,1513241720.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:20.667Z,1513241720.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:20.878Z,1513241720.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:21.030Z,1513241721.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:21.063Z,1513241721.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:21.455Z,1513241721.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:21.475Z,1513241721.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:21.674Z,1513241721.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:21.854Z,1513241721.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:21.869Z,1513241721.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:22.250Z,1513241722.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:22.266Z,1513241722.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:22.474Z,1513241722.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:22.631Z,1513241722.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:22.656Z,1513241722.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:22.917Z,1513241722.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:23.031Z,1513241723.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:23.061Z,1513241723.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:23.442Z,1513241723.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:23.469Z,1513241723.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:23.713Z,1513241723.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:23.844Z,1513241723.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:23.860Z,1513241723.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:24.231Z,1513241724.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:24.263Z,1513241724.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:24.510Z,1513241724.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:24.646Z,1513241724.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:24.670Z,1513241724.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:24.913Z,1513241724.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:25.052Z,1513241725.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:25.069Z,1513241725.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:25.449Z,1513241725.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:25.464Z,1513241725.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:25.710Z,1513241725.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:25.831Z,1513241725.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:25.884Z,1513241725.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:26.232Z,1513241726.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:26.287Z,1513241726.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:26.507Z,1513241726.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:26.632Z,1513241726.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:26.663Z,1513241726.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:26.925Z,1513241726.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:27.030Z,1513241727.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:27.106Z,1513241727.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:27.458Z,1513241727.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:27.519Z,1513241727.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:27.722Z,1513241727.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:27.853Z,1513241727.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:27.875Z,1513241727.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:28.256Z,1513241728.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:28.295Z,1513241728.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:28.517Z,1513241728.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:28.632Z,1513241728.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:28.651Z,1513241728.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:29.037Z,1513241729.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:29.051Z,1513241729.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:29.210Z,1513241729.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:29.434Z,1513241729.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:29.450Z,1513241729.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:29.835Z,1513241729.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:29.850Z,1513241729.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:30.005Z,1513241730.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:30.286Z,1513241730.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:30.327Z,1513241730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:30.642Z,1513241730.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:30.663Z,1513241730.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:30.805Z,1513241730.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:31.045Z,1513241731.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:31.063Z,1513241731.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:31.219Z,1513241731.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:31.443Z,1513241731.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:31.463Z,1513241731.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:31.839Z,1513241731.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:31.854Z,1513241731.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:32.014Z,1513241732.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:32.238Z,1513241732.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:32.253Z,1513241732.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:32.638Z,1513241732.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:32.659Z,1513241732.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:32.809Z,1513241732.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:33.041Z,1513241733.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:33.056Z,1513241733.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:33.213Z,1513241733.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:33.456Z,1513241733.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:33.491Z,1513241733.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:33.861Z,1513241733.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:33.893Z,1513241733.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:34.009Z,1513241734.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:34.246Z,1513241734.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:34.263Z,1513241734.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:34.638Z,1513241734.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:34.653Z,1513241734.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:34.805Z,1513241734.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:35.034Z,1513241735.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:35.063Z,1513241735.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:35.209Z,1513241735.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:35.443Z,1513241735.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:35.458Z,1513241735.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:35.843Z,1513241735.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:35.858Z,1513241735.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:36.006Z,1513241736.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:36.239Z,1513241736.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:36.254Z,1513241736.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:36.664Z,1513241736.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:36.719Z,1513241736.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:36.802Z,1513241736.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:37.045Z,1513241737.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:37.061Z,1513241737.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:37.205Z,1513241737.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:37.448Z,1513241737.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:37.463Z,1513241737.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:37.844Z,1513241737.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:37.859Z,1513241737.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:38.002Z,1513241738.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:38.247Z,1513241738.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:38.262Z,1513241738.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:38.640Z,1513241738.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:38.659Z,1513241738.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:38.797Z,1513241738.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:39.034Z,1513241739.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:39.061Z,1513241739.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:39.201Z,1513241739.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:39.449Z,1513241739.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:39.464Z,1513241739.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:39.876Z,1513241739.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:39.919Z,1513241739.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:39.998Z,1513241739.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:40.251Z,1513241740.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:40.266Z,1513241740.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:40.652Z,1513241740.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:40.675Z,1513241740.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:40.793Z,1513241740.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:41.031Z,1513241741.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:41.067Z,1513241741.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:41.197Z,1513241741.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:41.435Z,1513241741.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:41.507Z,1513241741.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:41.832Z,1513241741.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:41.863Z,1513241741.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:41.997Z,1513241741.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:42.231Z,1513241742.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:42.262Z,1513241742.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:42.651Z,1513241742.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:42.666Z,1513241742.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:42.799Z,1513241742.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:43.068Z,1513241743.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:43.091Z,1513241743.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:43.222Z,1513241743.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:43.451Z,1513241743.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:43.467Z,1513241743.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:43.831Z,1513241743.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:43.868Z,1513241743.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:44.017Z,1513241744.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:44.231Z,1513241744.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:44.262Z,1513241744.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:44.635Z,1513241744.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:44.661Z,1513241744.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:44.815Z,1513241744.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:45.038Z,1513241745.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:45.067Z,1513241745.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:45.221Z,1513241745.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:45.446Z,1513241745.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:45.475Z,1513241745.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:45.865Z,1513241745.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:45.879Z,1513241745.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:46.017Z,1513241746.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:46.265Z,1513241746.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:46.296Z,1513241746.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:46.638Z,1513241746.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:46.670Z,1513241746.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:46.813Z,1513241746.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:47.042Z,1513241747.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:47.123Z,1513241747.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:47.217Z,1513241747.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:47.437Z,1513241747.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:47.452Z,1513241747.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:47.839Z,1513241747.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:47.856Z,1513241747.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:48.015Z,1513241748.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:48.239Z,1513241748.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:48.254Z,1513241748.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:48.657Z,1513241748.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:48.727Z,1513241748.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:48.809Z,1513241748.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:49.054Z,1513241749.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:49.080Z,1513241749.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:49.213Z,1513241749.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:49.457Z,1513241749.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:49.548Z,1513241749.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:49.839Z,1513241749.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:49.859Z,1513241749.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:50.009Z,1513241750.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:50.236Z,1513241750.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:50.256Z,1513241750.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:50.637Z,1513241750.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:50.659Z,1513241750.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:50.805Z,1513241750.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:51.040Z,1513241751.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:51.055Z,1513241751.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:51.209Z,1513241751.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:51.442Z,1513241751.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:51.456Z,1513241751.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:51.853Z,1513241751.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:51.867Z,1513241751.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:52.005Z,1513241752.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:52.246Z,1513241752.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:52.260Z,1513241752.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:52.639Z,1513241752.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:52.655Z,1513241752.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:52.802Z,1513241752.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:53.051Z,1513241753.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:53.066Z,1513241753.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:53.205Z,1513241753.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:53.430Z,1513241753.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:53.463Z,1513241753.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:53.848Z,1513241753.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:53.864Z,1513241753.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:54.002Z,1513241754.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:54.230Z,1513241754.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:54.259Z,1513241754.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:54.650Z,1513241754.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:54.667Z,1513241754.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:54.797Z,1513241754.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:55.052Z,1513241755.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:55.070Z,1513241755.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:55.201Z,1513241755.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:55.449Z,1513241755.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:55.463Z,1513241755.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:55.877Z,1513241755.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:55.908Z,1513241755.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:55.998Z,1513241755.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:56.231Z,1513241756.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:56.263Z,1513241756.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:56.632Z,1513241756.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:56.664Z,1513241756.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:56.795Z,1513241756.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:57.031Z,1513241757.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:57.066Z,1513241757.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:57.225Z,1513241757.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:57.442Z,1513241757.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:57.475Z,1513241757.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:57.855Z,1513241757.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:57.912Z,1513241757.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:58.021Z,1513241758.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:58.255Z,1513241758.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:58.270Z,1513241758.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:58.636Z,1513241758.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:58.671Z,1513241758.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:58.819Z,1513241758.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:59.034Z,1513241759.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:59.089Z,1513241759.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:59.229Z,1513241759.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:59.437Z,1513241759.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:59.473Z,1513241759.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:55:59.833Z,1513241759.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:55:59.848Z,1513241759.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:00.026Z,1513241760.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:00.238Z,1513241760.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:00.253Z,1513241760.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:00.641Z,1513241760.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:00.656Z,1513241760.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:00.821Z,1513241760.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:01.053Z,1513241761.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:01.081Z,1513241761.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:01.225Z,1513241761.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:01.454Z,1513241761.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:01.479Z,1513241761.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:01.835Z,1513241761.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:01.849Z,1513241761.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:02.022Z,1513241762.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:02.243Z,1513241762.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:02.300Z,1513241762.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:02.639Z,1513241762.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:02.659Z,1513241762.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:02.820Z,1513241762.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:03.041Z,1513241763.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:03.055Z,1513241763.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:03.225Z,1513241763.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:03.454Z,1513241763.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:03.468Z,1513241763.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:03.850Z,1513241763.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:03.864Z,1513241763.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:04.023Z,1513241764.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:04.245Z,1513241764.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:04.261Z,1513241764.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:04.643Z,1513241764.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:04.663Z,1513241764.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:04.818Z,1513241764.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:05.034Z,1513241765.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:05.061Z,1513241765.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:05.221Z,1513241765.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:05.437Z,1513241765.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:05.459Z,1513241765.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:05.841Z,1513241765.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:05.856Z,1513241765.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:06.018Z,1513241766.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:06.238Z,1513241766.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:06.259Z,1513241766.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:06.650Z,1513241766.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:06.665Z,1513241766.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:06.813Z,1513241766.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:07.049Z,1513241767.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:07.072Z,1513241767.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:07.218Z,1513241767.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:07.450Z,1513241767.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:07.465Z,1513241767.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:07.832Z,1513241767.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:07.863Z,1513241767.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:08.014Z,1513241768.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:08.232Z,1513241768.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:08.287Z,1513241768.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:08.682Z,1513241768.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:08.757Z,1513241768.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:08.810Z,1513241768.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:09.030Z,1513241769.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:09.059Z,1513241769.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:09.213Z,1513241769.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:09.449Z,1513241769.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:09.464Z,1513241769.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:09.851Z,1513241769.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:09.897Z,1513241769.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:10.009Z,1513241770.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:10.251Z,1513241770.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:10.271Z,1513241770.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:10.632Z,1513241770.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:10.679Z,1513241770.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:10.807Z,1513241770.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:11.032Z,1513241771.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:11.068Z,1513241771.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:11.237Z,1513241771.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:12.034Z,1513241772.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:12.830Z,1513241772.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:13.233Z,1513241773.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:14.029Z,1513241774.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:14.549Z,1513241774.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:14.588Z,1513241774.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:14.588Z,1513241774.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168
2017-12-14T08:56:14.588Z,1513241774.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:56:14.590Z,1513241774.590 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:14.590Z,1513241774.590 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 168
2017-12-14T08:56:14.590Z,1513241774.590 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:56:14.592Z,1513241774.592 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:14.592Z,1513241774.592 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168
2017-12-14T08:56:14.625Z,1513241774.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:56:14.645Z,1513241774.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:56:14.645Z,1513241774.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:56:14.646Z,1513241774.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:56:14.707Z,1513241774.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:14.768Z,1513241774.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:56:14.768Z,1513241774.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168
2017-12-14T08:56:14.768Z,1513241774.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:56:14.769Z,1513241774.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 168
2017-12-14T08:56:14.770Z,1513241774.770 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:56:14.770Z,1513241774.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168
2017-12-14T08:56:14.825Z,1513241774.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:15.070Z,1513241775.070 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T08:56:15.070Z,1513241775.070 [NAL9602] Data Fault, FailCount= 1
2017-12-14T08:56:15.070Z,1513241775.070 [NAL9602](ERROR): Data Fault
2017-12-14T08:56:15.107Z,1513241775.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:15.157Z,1513241775.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:56:15.157Z,1513241775.157 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:56:15.158Z,1513241775.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:56:15.158Z,1513241775.158 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:56:15.158Z,1513241775.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:56:15.159Z,1513241775.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:56:15.159Z,1513241775.159 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:56:15.160Z,1513241775.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:56:15.160Z,1513241775.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:56:15.184Z,1513241775.184 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T08:56:15.230Z,1513241775.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:15.474Z,1513241775.474 [NAL9602](INFO): Powering down
2017-12-14T08:56:15.496Z,1513241775.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:15.534Z,1513241775.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:15.894Z,1513241775.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:15.916Z,1513241775.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:16.026Z,1513241776.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:16.296Z,1513241776.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:16.315Z,1513241776.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:16.328Z,1513241776.328 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T08:56:16.328Z,1513241776.328 [NAL9602] No Fault, FailCount= 1
2017-12-14T08:56:16.694Z,1513241776.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:16.709Z,1513241776.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:16.821Z,1513241776.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:17.094Z,1513241777.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:17.108Z,1513241777.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:17.225Z,1513241777.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:17.493Z,1513241777.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:17.519Z,1513241777.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:17.899Z,1513241777.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:17.919Z,1513241777.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:18.021Z,1513241778.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:18.309Z,1513241778.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:18.356Z,1513241778.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:18.686Z,1513241778.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:18.732Z,1513241778.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:18.817Z,1513241778.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:19.123Z,1513241779.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:19.142Z,1513241779.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:19.221Z,1513241779.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:19.486Z,1513241779.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:19.543Z,1513241779.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:19.902Z,1513241779.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:19.947Z,1513241779.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:20.018Z,1513241780.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:20.296Z,1513241780.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:20.356Z,1513241780.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:20.696Z,1513241780.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:20.727Z,1513241780.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:20.818Z,1513241780.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:21.088Z,1513241781.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:21.127Z,1513241781.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:21.221Z,1513241781.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:21.488Z,1513241781.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:21.519Z,1513241781.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:21.892Z,1513241781.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:21.947Z,1513241781.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:22.018Z,1513241782.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:22.296Z,1513241782.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:22.367Z,1513241782.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:22.698Z,1513241782.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:22.800Z,1513241782.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:22.814Z,1513241782.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:23.088Z,1513241783.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:23.159Z,1513241783.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:23.218Z,1513241783.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:23.488Z,1513241783.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:23.524Z,1513241783.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:23.928Z,1513241783.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:23.964Z,1513241783.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:24.014Z,1513241784.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:24.288Z,1513241784.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:24.362Z,1513241784.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:24.688Z,1513241784.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:24.754Z,1513241784.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:24.811Z,1513241784.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:25.094Z,1513241785.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:25.134Z,1513241785.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:25.233Z,1513241785.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:25.492Z,1513241785.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:25.539Z,1513241785.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:25.895Z,1513241785.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:25.909Z,1513241785.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:26.029Z,1513241786.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:26.334Z,1513241786.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:26.351Z,1513241786.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:26.691Z,1513241786.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:26.732Z,1513241786.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:26.826Z,1513241786.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:27.089Z,1513241787.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:27.151Z,1513241787.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:27.237Z,1513241787.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:27.505Z,1513241787.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:27.520Z,1513241787.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:27.914Z,1513241787.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:27.953Z,1513241787.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:28.034Z,1513241788.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:28.287Z,1513241788.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:28.323Z,1513241788.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:28.736Z,1513241788.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:28.756Z,1513241788.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:28.830Z,1513241788.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:29.086Z,1513241789.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:29.120Z,1513241789.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:29.233Z,1513241789.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:29.514Z,1513241789.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:29.535Z,1513241789.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:29.886Z,1513241789.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:29.933Z,1513241789.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:30.030Z,1513241790.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:30.304Z,1513241790.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:30.344Z,1513241790.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:30.688Z,1513241790.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:30.761Z,1513241790.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:30.826Z,1513241790.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:31.114Z,1513241791.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:31.160Z,1513241791.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:31.230Z,1513241791.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:31.488Z,1513241791.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:31.531Z,1513241791.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:31.888Z,1513241791.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:31.940Z,1513241791.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:32.026Z,1513241792.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:32.312Z,1513241792.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:32.377Z,1513241792.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:32.696Z,1513241792.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:32.755Z,1513241792.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:32.823Z,1513241792.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:33.097Z,1513241793.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:33.225Z,1513241793.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:33.231Z,1513241793.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:33.500Z,1513241793.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:33.566Z,1513241793.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:33.914Z,1513241793.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:33.970Z,1513241793.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:34.022Z,1513241794.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:34.299Z,1513241794.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:34.394Z,1513241794.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:34.703Z,1513241794.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:34.776Z,1513241794.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:34.830Z,1513241794.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:35.096Z,1513241795.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:35.188Z,1513241795.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:35.233Z,1513241795.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:35.496Z,1513241795.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:35.550Z,1513241795.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:35.896Z,1513241795.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:35.951Z,1513241795.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:36.030Z,1513241796.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:36.297Z,1513241796.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:36.346Z,1513241796.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:36.698Z,1513241796.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:36.764Z,1513241796.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:36.829Z,1513241796.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:37.096Z,1513241797.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:37.151Z,1513241797.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:37.234Z,1513241797.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:37.496Z,1513241797.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:37.547Z,1513241797.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:37.896Z,1513241797.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:37.922Z,1513241797.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:38.030Z,1513241798.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:38.298Z,1513241798.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:38.357Z,1513241798.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:38.725Z,1513241798.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:38.825Z,1513241798.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:38.844Z,1513241798.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:39.099Z,1513241799.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:39.140Z,1513241799.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:39.257Z,1513241799.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:39.502Z,1513241799.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:39.543Z,1513241799.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:39.905Z,1513241799.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:39.943Z,1513241799.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:40.054Z,1513241800.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:40.294Z,1513241800.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:40.342Z,1513241800.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:40.694Z,1513241800.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:40.752Z,1513241800.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:40.849Z,1513241800.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:41.088Z,1513241801.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:41.130Z,1513241801.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:41.254Z,1513241801.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:41.498Z,1513241801.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:41.580Z,1513241801.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:41.898Z,1513241801.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:41.953Z,1513241801.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:42.050Z,1513241802.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:42.288Z,1513241802.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:42.332Z,1513241802.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:42.688Z,1513241802.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:42.759Z,1513241802.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:42.846Z,1513241802.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:43.088Z,1513241803.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:43.128Z,1513241803.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:43.250Z,1513241803.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:43.486Z,1513241803.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:43.513Z,1513241803.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:43.896Z,1513241803.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:43.928Z,1513241803.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:44.045Z,1513241804.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:44.292Z,1513241804.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:44.332Z,1513241804.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:44.694Z,1513241804.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:44.718Z,1513241804.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:44.842Z,1513241804.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:45.094Z,1513241805.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:45.115Z,1513241805.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:45.245Z,1513241805.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:45.496Z,1513241805.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:45.526Z,1513241805.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:45.871Z,1513241805.871 [NAL9602](INFO): Powering up NAL9602
2017-12-14T08:56:45.902Z,1513241805.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:45.925Z,1513241805.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:46.042Z,1513241806.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:46.299Z,1513241806.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:46.320Z,1513241806.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:46.695Z,1513241806.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:46.723Z,1513241806.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:46.837Z,1513241806.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:47.089Z,1513241807.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:47.130Z,1513241807.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:47.241Z,1513241807.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:47.494Z,1513241807.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:47.508Z,1513241807.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:47.898Z,1513241807.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:47.920Z,1513241807.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:48.040Z,1513241808.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:48.299Z,1513241808.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:48.336Z,1513241808.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:48.718Z,1513241808.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:48.760Z,1513241808.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:48.833Z,1513241808.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:49.094Z,1513241809.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:49.127Z,1513241809.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:49.237Z,1513241809.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:49.495Z,1513241809.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:49.571Z,1513241809.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:49.927Z,1513241809.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:49.959Z,1513241809.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:50.033Z,1513241810.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:50.290Z,1513241810.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:50.315Z,1513241810.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:50.687Z,1513241810.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:50.720Z,1513241810.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:50.829Z,1513241810.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:51.086Z,1513241811.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:51.132Z,1513241811.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:51.233Z,1513241811.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:51.487Z,1513241811.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:51.502Z,1513241811.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:51.892Z,1513241811.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:51.907Z,1513241811.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:52.030Z,1513241812.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:52.294Z,1513241812.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:52.309Z,1513241812.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:52.696Z,1513241812.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:52.718Z,1513241812.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:52.825Z,1513241812.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:53.088Z,1513241813.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:53.143Z,1513241813.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:53.229Z,1513241813.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:53.494Z,1513241813.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:53.508Z,1513241813.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:53.897Z,1513241813.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:53.916Z,1513241813.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:54.025Z,1513241814.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:54.325Z,1513241814.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:54.349Z,1513241814.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:54.695Z,1513241814.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:54.727Z,1513241814.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:54.823Z,1513241814.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:55.087Z,1513241815.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:55.114Z,1513241815.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:55.229Z,1513241815.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:55.488Z,1513241815.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:55.533Z,1513241815.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:55.898Z,1513241815.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:55.920Z,1513241815.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:56.025Z,1513241816.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:56.304Z,1513241816.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:56.378Z,1513241816.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:56.670Z,1513241816.670 [NAL9602](INFO): NAL9602 initialized
2017-12-14T08:56:56.690Z,1513241816.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:56.731Z,1513241816.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:56.821Z,1513241816.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:57.104Z,1513241817.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:57.184Z,1513241817.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:57.225Z,1513241817.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:57.514Z,1513241817.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:57.529Z,1513241817.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:57.910Z,1513241817.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:57.968Z,1513241817.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:58.022Z,1513241818.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:58.305Z,1513241818.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:58.332Z,1513241818.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:58.687Z,1513241818.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:58.723Z,1513241818.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:58.817Z,1513241818.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:59.097Z,1513241819.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:59.135Z,1513241819.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:59.221Z,1513241819.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:59.494Z,1513241819.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:59.541Z,1513241819.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:56:59.891Z,1513241819.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:56:59.907Z,1513241819.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:00.017Z,1513241820.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:00.305Z,1513241820.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:00.342Z,1513241820.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:00.718Z,1513241820.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:00.759Z,1513241820.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:00.813Z,1513241820.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:01.108Z,1513241821.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:01.194Z,1513241821.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:01.217Z,1513241821.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:01.494Z,1513241821.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:01.508Z,1513241821.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:01.896Z,1513241821.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:01.920Z,1513241821.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:02.013Z,1513241822.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:02.292Z,1513241822.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:02.314Z,1513241822.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:02.696Z,1513241822.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:02.711Z,1513241822.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:02.809Z,1513241822.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:03.090Z,1513241823.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:03.115Z,1513241823.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:03.213Z,1513241823.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:03.507Z,1513241823.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:03.547Z,1513241823.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:03.911Z,1513241823.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:03.948Z,1513241823.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:04.010Z,1513241824.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:04.322Z,1513241824.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:04.371Z,1513241824.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:04.686Z,1513241824.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:04.712Z,1513241824.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:04.805Z,1513241824.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:05.087Z,1513241825.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:05.130Z,1513241825.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:05.209Z,1513241825.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:05.489Z,1513241825.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:05.526Z,1513241825.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:05.890Z,1513241825.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:05.925Z,1513241825.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:06.005Z,1513241826.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:06.311Z,1513241826.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:06.370Z,1513241826.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:06.709Z,1513241826.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:06.736Z,1513241826.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:06.806Z,1513241826.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:07.121Z,1513241827.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:07.136Z,1513241827.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:07.229Z,1513241827.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:07.498Z,1513241827.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:07.540Z,1513241827.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:07.895Z,1513241827.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:07.915Z,1513241827.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:08.026Z,1513241828.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:08.300Z,1513241828.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:08.321Z,1513241828.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:08.695Z,1513241828.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:08.721Z,1513241828.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:08.822Z,1513241828.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:09.098Z,1513241829.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:09.136Z,1513241829.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:09.225Z,1513241829.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:09.512Z,1513241829.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:09.535Z,1513241829.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:09.918Z,1513241829.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:09.935Z,1513241829.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:10.022Z,1513241830.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:10.318Z,1513241830.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:10.333Z,1513241830.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:10.688Z,1513241830.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:10.754Z,1513241830.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:10.817Z,1513241830.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:11.086Z,1513241831.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:11.130Z,1513241831.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:11.221Z,1513241831.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:12.017Z,1513241832.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:12.813Z,1513241832.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:13.217Z,1513241833.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:14.014Z,1513241834.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:14.583Z,1513241834.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:14.598Z,1513241834.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:14.693Z,1513241834.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:14.732Z,1513241834.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:14.810Z,1513241834.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:15.094Z,1513241835.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:15.124Z,1513241835.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:15.213Z,1513241835.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:15.494Z,1513241835.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:15.521Z,1513241835.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:15.895Z,1513241835.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:15.930Z,1513241835.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:16.010Z,1513241836.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:16.281Z,1513241836.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:16.304Z,1513241836.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:16.682Z,1513241836.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:16.709Z,1513241836.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:16.805Z,1513241836.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:17.079Z,1513241837.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:17.098Z,1513241837.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:17.209Z,1513241837.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:17.494Z,1513241837.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:17.508Z,1513241837.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:17.893Z,1513241837.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:17.908Z,1513241837.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:18.005Z,1513241838.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:18.294Z,1513241838.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:18.316Z,1513241838.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:18.671Z,1513241838.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:18.759Z,1513241838.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:18.801Z,1513241838.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:19.071Z,1513241839.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:19.085Z,1513241839.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:19.205Z,1513241839.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:19.476Z,1513241839.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:19.525Z,1513241839.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:19.886Z,1513241839.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:19.904Z,1513241839.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:20.002Z,1513241840.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:20.294Z,1513241840.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:20.384Z,1513241840.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:20.693Z,1513241840.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:20.709Z,1513241840.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:20.799Z,1513241840.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:21.082Z,1513241841.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:21.122Z,1513241841.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:21.225Z,1513241841.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:21.473Z,1513241841.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:21.488Z,1513241841.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:21.868Z,1513241841.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:21.887Z,1513241841.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:22.022Z,1513241842.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:22.276Z,1513241842.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:22.311Z,1513241842.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:22.679Z,1513241842.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:22.695Z,1513241842.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:22.818Z,1513241842.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:23.071Z,1513241843.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:23.121Z,1513241843.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:23.229Z,1513241843.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:23.518Z,1513241843.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:23.560Z,1513241843.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:23.885Z,1513241843.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:23.915Z,1513241843.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:24.025Z,1513241844.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:24.278Z,1513241844.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:24.292Z,1513241844.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:24.684Z,1513241844.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:24.715Z,1513241844.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:24.821Z,1513241844.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:25.079Z,1513241845.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:25.094Z,1513241845.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:25.225Z,1513241845.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:25.476Z,1513241845.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:25.495Z,1513241845.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:25.880Z,1513241845.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:25.899Z,1513241845.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:26.022Z,1513241846.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:26.286Z,1513241846.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:26.303Z,1513241846.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:26.701Z,1513241846.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:26.743Z,1513241846.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:26.819Z,1513241846.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:27.101Z,1513241847.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:27.116Z,1513241847.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:27.221Z,1513241847.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:27.479Z,1513241847.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:27.495Z,1513241847.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:27.882Z,1513241847.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:27.912Z,1513241847.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:28.018Z,1513241848.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:28.271Z,1513241848.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:28.306Z,1513241848.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:28.671Z,1513241848.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:28.721Z,1513241848.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:28.813Z,1513241848.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:29.079Z,1513241849.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:29.105Z,1513241849.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:29.217Z,1513241849.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:29.482Z,1513241849.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:29.515Z,1513241849.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:29.905Z,1513241849.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:29.967Z,1513241849.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:30.014Z,1513241850.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:30.282Z,1513241850.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:30.309Z,1513241850.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:30.671Z,1513241850.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:30.707Z,1513241850.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:30.809Z,1513241850.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:31.077Z,1513241851.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:31.092Z,1513241851.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:31.213Z,1513241851.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:31.476Z,1513241851.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:31.491Z,1513241851.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:31.877Z,1513241851.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:31.892Z,1513241851.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:32.009Z,1513241852.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:32.290Z,1513241852.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:32.328Z,1513241852.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:32.690Z,1513241852.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:32.723Z,1513241852.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:32.808Z,1513241852.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:33.090Z,1513241853.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:33.127Z,1513241853.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:33.214Z,1513241853.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:33.480Z,1513241853.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:33.499Z,1513241853.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:33.878Z,1513241853.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:33.893Z,1513241853.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:34.011Z,1513241854.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:34.276Z,1513241854.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:34.310Z,1513241854.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:34.680Z,1513241854.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:34.695Z,1513241854.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:34.806Z,1513241854.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:35.076Z,1513241855.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:35.091Z,1513241855.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:35.213Z,1513241855.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:35.490Z,1513241855.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:35.523Z,1513241855.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:35.893Z,1513241855.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:35.926Z,1513241855.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:36.009Z,1513241856.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:36.297Z,1513241856.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:36.328Z,1513241856.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:36.679Z,1513241856.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:36.699Z,1513241856.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:36.807Z,1513241856.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:37.071Z,1513241857.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:37.106Z,1513241857.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:37.225Z,1513241857.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:37.476Z,1513241857.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:37.509Z,1513241857.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:37.879Z,1513241857.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:37.905Z,1513241857.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:38.022Z,1513241858.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:38.282Z,1513241858.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:38.320Z,1513241858.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:38.686Z,1513241858.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:38.708Z,1513241858.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:38.817Z,1513241858.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:39.110Z,1513241859.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:39.125Z,1513241859.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:39.221Z,1513241859.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:39.508Z,1513241859.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:39.561Z,1513241859.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:39.880Z,1513241859.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:39.903Z,1513241859.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:40.018Z,1513241860.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:40.277Z,1513241860.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:40.338Z,1513241860.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:40.685Z,1513241860.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:40.729Z,1513241860.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:40.813Z,1513241860.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:41.084Z,1513241861.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:41.140Z,1513241861.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:41.217Z,1513241861.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:41.483Z,1513241861.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:41.503Z,1513241861.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:41.894Z,1513241861.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:41.944Z,1513241861.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:42.013Z,1513241862.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:42.295Z,1513241862.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:42.327Z,1513241862.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:42.692Z,1513241862.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:42.754Z,1513241862.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:42.818Z,1513241862.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:43.081Z,1513241863.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:43.097Z,1513241863.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:43.221Z,1513241863.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:43.478Z,1513241863.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:43.494Z,1513241863.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:43.874Z,1513241863.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:43.919Z,1513241863.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:44.017Z,1513241864.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:44.286Z,1513241864.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:44.300Z,1513241864.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:44.686Z,1513241864.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:44.708Z,1513241864.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:44.813Z,1513241864.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:45.083Z,1513241865.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:45.119Z,1513241865.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:45.217Z,1513241865.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:45.483Z,1513241865.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:45.498Z,1513241865.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:45.870Z,1513241865.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:45.943Z,1513241865.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:46.014Z,1513241866.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:46.278Z,1513241866.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:46.293Z,1513241866.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:46.678Z,1513241866.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:46.692Z,1513241866.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:46.809Z,1513241866.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:47.081Z,1513241867.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:47.107Z,1513241867.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:47.213Z,1513241867.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:47.486Z,1513241867.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:47.502Z,1513241867.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:47.889Z,1513241867.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:47.903Z,1513241867.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:48.010Z,1513241868.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:48.286Z,1513241868.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:48.326Z,1513241868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:48.685Z,1513241868.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:48.703Z,1513241868.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:48.807Z,1513241868.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:49.117Z,1513241869.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:49.144Z,1513241869.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:49.217Z,1513241869.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:49.478Z,1513241869.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:49.518Z,1513241869.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:49.875Z,1513241869.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:49.891Z,1513241869.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:50.014Z,1513241870.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:50.286Z,1513241870.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:50.329Z,1513241870.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:50.682Z,1513241870.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:50.697Z,1513241870.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:50.811Z,1513241870.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:51.099Z,1513241871.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:51.151Z,1513241871.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:51.221Z,1513241871.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:51.477Z,1513241871.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:51.493Z,1513241871.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:51.884Z,1513241871.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:51.903Z,1513241871.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:52.018Z,1513241872.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:52.307Z,1513241872.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:52.355Z,1513241872.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:52.672Z,1513241872.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:52.704Z,1513241872.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:52.813Z,1513241872.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:53.071Z,1513241873.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:53.102Z,1513241873.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:53.218Z,1513241873.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:53.495Z,1513241873.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:53.518Z,1513241873.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:53.899Z,1513241873.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:53.914Z,1513241873.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:54.013Z,1513241874.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:54.286Z,1513241874.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:54.308Z,1513241874.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:54.670Z,1513241874.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:54.706Z,1513241874.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:54.809Z,1513241874.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:55.086Z,1513241875.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:55.117Z,1513241875.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:55.213Z,1513241875.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:55.472Z,1513241875.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:55.499Z,1513241875.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:55.878Z,1513241875.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:55.909Z,1513241875.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:56.010Z,1513241876.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:56.289Z,1513241876.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:56.316Z,1513241876.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:56.686Z,1513241876.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:56.720Z,1513241876.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:56.805Z,1513241876.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:57.086Z,1513241877.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:57.101Z,1513241877.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:57.209Z,1513241877.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:57.475Z,1513241877.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:57.515Z,1513241877.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:57.871Z,1513241877.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:57.890Z,1513241877.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:58.007Z,1513241878.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:58.275Z,1513241878.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:58.304Z,1513241878.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:58.715Z,1513241878.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:58.750Z,1513241878.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:58.802Z,1513241878.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:59.088Z,1513241879.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:59.104Z,1513241879.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:59.205Z,1513241879.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:59.487Z,1513241879.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:59.503Z,1513241879.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:57:59.889Z,1513241879.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:57:59.910Z,1513241879.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:00.002Z,1513241880.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:00.289Z,1513241880.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:00.311Z,1513241880.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:00.690Z,1513241880.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:00.705Z,1513241880.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:00.797Z,1513241880.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:01.074Z,1513241881.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:01.105Z,1513241881.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:01.201Z,1513241881.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:01.483Z,1513241881.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:01.504Z,1513241881.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:01.918Z,1513241881.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:01.960Z,1513241881.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:01.998Z,1513241881.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:02.289Z,1513241882.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:02.311Z,1513241882.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:02.698Z,1513241882.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:02.721Z,1513241882.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:02.795Z,1513241882.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:03.098Z,1513241883.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:03.172Z,1513241883.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:03.225Z,1513241883.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:03.475Z,1513241883.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:03.528Z,1513241883.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:03.875Z,1513241883.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:03.891Z,1513241883.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:04.022Z,1513241884.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:04.282Z,1513241884.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:04.297Z,1513241884.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:04.681Z,1513241884.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:04.727Z,1513241884.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:04.818Z,1513241884.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:05.093Z,1513241885.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:05.146Z,1513241885.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:05.226Z,1513241885.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:05.499Z,1513241885.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:05.553Z,1513241885.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:05.900Z,1513241885.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:05.923Z,1513241885.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:06.021Z,1513241886.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:06.281Z,1513241886.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:06.315Z,1513241886.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:06.677Z,1513241886.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:06.707Z,1513241886.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:06.817Z,1513241886.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:07.079Z,1513241887.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:07.114Z,1513241887.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:07.221Z,1513241887.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:07.475Z,1513241887.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:07.490Z,1513241887.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:07.875Z,1513241887.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:07.889Z,1513241887.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:08.018Z,1513241888.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:08.309Z,1513241888.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:08.340Z,1513241888.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:08.685Z,1513241888.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:08.718Z,1513241888.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:08.813Z,1513241888.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:09.093Z,1513241889.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:09.131Z,1513241889.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:09.217Z,1513241889.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:09.480Z,1513241889.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:09.494Z,1513241889.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:09.876Z,1513241889.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:09.895Z,1513241889.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:10.014Z,1513241890.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:10.284Z,1513241890.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:10.299Z,1513241890.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:10.688Z,1513241890.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:10.738Z,1513241890.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:10.811Z,1513241890.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:11.074Z,1513241891.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:11.094Z,1513241891.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:11.213Z,1513241891.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:11.488Z,1513241891.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:11.508Z,1513241891.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:12.010Z,1513241892.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:12.805Z,1513241892.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:13.209Z,1513241893.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:14.005Z,1513241894.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:14.801Z,1513241894.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:15.077Z,1513241895.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:15.131Z,1513241895.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:15.205Z,1513241895.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:15.234Z,1513241895.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:15.268Z,1513241895.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:15.618Z,1513241895.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:15.633Z,1513241895.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:16.002Z,1513241896.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:16.018Z,1513241896.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:16.033Z,1513241896.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:16.413Z,1513241896.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:16.431Z,1513241896.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:16.799Z,1513241896.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:16.874Z,1513241896.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:16.894Z,1513241896.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:17.213Z,1513241897.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:17.233Z,1513241897.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:17.254Z,1513241897.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:17.613Z,1513241897.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:17.641Z,1513241897.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:18.014Z,1513241898.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:18.029Z,1513241898.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:18.044Z,1513241898.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:18.403Z,1513241898.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:18.418Z,1513241898.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:18.826Z,1513241898.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:18.849Z,1513241898.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:18.888Z,1513241898.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:19.211Z,1513241899.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:19.228Z,1513241899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:19.261Z,1513241899.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:19.608Z,1513241899.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:19.642Z,1513241899.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:20.009Z,1513241900.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:20.024Z,1513241900.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:20.059Z,1513241900.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:20.451Z,1513241900.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:20.508Z,1513241900.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:20.813Z,1513241900.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:20.828Z,1513241900.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:20.853Z,1513241900.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:21.215Z,1513241901.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:21.230Z,1513241901.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:21.257Z,1513241901.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:21.612Z,1513241901.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:21.628Z,1513241901.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:22.012Z,1513241902.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:22.026Z,1513241902.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:22.054Z,1513241902.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:22.414Z,1513241902.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:22.512Z,1513241902.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:22.816Z,1513241902.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:22.835Z,1513241902.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:22.849Z,1513241902.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:23.218Z,1513241903.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:23.239Z,1513241903.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:23.253Z,1513241903.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:23.622Z,1513241903.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:23.637Z,1513241903.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:24.021Z,1513241904.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:24.036Z,1513241904.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:24.050Z,1513241904.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:24.403Z,1513241904.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:24.486Z,1513241904.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:24.810Z,1513241904.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:24.825Z,1513241904.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:24.846Z,1513241904.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:25.210Z,1513241905.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:25.225Z,1513241905.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:25.249Z,1513241905.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:25.613Z,1513241905.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:25.628Z,1513241905.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:26.010Z,1513241906.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:26.024Z,1513241906.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:26.046Z,1513241906.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:26.464Z,1513241906.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:26.508Z,1513241906.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:26.825Z,1513241906.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:26.842Z,1513241906.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:26.915Z,1513241906.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:27.232Z,1513241907.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:27.245Z,1513241907.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:27.260Z,1513241907.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:27.611Z,1513241907.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:27.671Z,1513241907.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:28.014Z,1513241908.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:28.028Z,1513241908.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:28.042Z,1513241908.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:28.408Z,1513241908.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:28.466Z,1513241908.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:28.802Z,1513241908.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:28.835Z,1513241908.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:28.838Z,1513241908.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:29.222Z,1513241909.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:29.237Z,1513241909.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:29.241Z,1513241909.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:29.620Z,1513241909.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:29.635Z,1513241909.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:30.018Z,1513241910.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:30.038Z,1513241910.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:30.046Z,1513241910.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:30.428Z,1513241910.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:30.470Z,1513241910.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:30.834Z,1513241910.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:30.855Z,1513241910.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:30.894Z,1513241910.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:31.207Z,1513241911.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:31.223Z,1513241911.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:31.241Z,1513241911.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:31.611Z,1513241911.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:31.626Z,1513241911.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:32.006Z,1513241912.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:32.021Z,1513241912.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:32.038Z,1513241912.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:32.426Z,1513241912.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:32.459Z,1513241912.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:32.841Z,1513241912.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:32.863Z,1513241912.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:32.903Z,1513241912.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:33.227Z,1513241913.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:33.245Z,1513241913.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:33.250Z,1513241913.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:33.648Z,1513241913.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:33.668Z,1513241913.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:34.013Z,1513241914.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:34.035Z,1513241914.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:34.042Z,1513241914.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:34.412Z,1513241914.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:34.499Z,1513241914.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:34.817Z,1513241914.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:34.832Z,1513241914.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:34.838Z,1513241914.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:35.223Z,1513241915.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:35.238Z,1513241915.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:35.241Z,1513241915.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:35.618Z,1513241915.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:35.639Z,1513241915.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:36.025Z,1513241916.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:36.039Z,1513241916.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:36.042Z,1513241916.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:36.415Z,1513241916.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:36.524Z,1513241916.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:36.817Z,1513241916.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:36.834Z,1513241916.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:36.861Z,1513241916.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:37.209Z,1513241917.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:37.236Z,1513241917.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:37.237Z,1513241917.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:37.600Z,1513241917.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:37.640Z,1513241917.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:38.003Z,1513241918.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:38.033Z,1513241918.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:38.044Z,1513241918.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:38.477Z,1513241918.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:38.518Z,1513241918.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:38.825Z,1513241918.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:38.830Z,1513241918.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:38.867Z,1513241918.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:39.226Z,1513241919.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:39.233Z,1513241919.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:39.261Z,1513241919.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:39.614Z,1513241919.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:39.629Z,1513241919.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:40.030Z,1513241920.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:40.064Z,1513241920.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:40.107Z,1513241920.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:40.413Z,1513241920.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:40.517Z,1513241920.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:40.816Z,1513241920.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:40.826Z,1513241920.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:40.834Z,1513241920.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:41.223Z,1513241921.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:41.229Z,1513241921.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:41.239Z,1513241921.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:41.623Z,1513241921.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:41.638Z,1513241921.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:42.021Z,1513241922.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:42.026Z,1513241922.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:42.043Z,1513241922.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:42.415Z,1513241922.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:42.432Z,1513241922.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:42.803Z,1513241922.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:42.822Z,1513241922.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:42.831Z,1513241922.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:43.227Z,1513241923.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:43.245Z,1513241923.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:43.279Z,1513241923.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:43.603Z,1513241923.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:43.636Z,1513241923.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:44.007Z,1513241924.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:44.022Z,1513241924.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:44.038Z,1513241924.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:44.421Z,1513241924.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:44.444Z,1513241924.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:44.818Z,1513241924.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:44.860Z,1513241924.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:44.883Z,1513241924.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:45.226Z,1513241925.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:45.238Z,1513241925.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:45.250Z,1513241925.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:45.614Z,1513241925.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:45.628Z,1513241925.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:46.009Z,1513241926.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:46.025Z,1513241926.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:46.042Z,1513241926.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:46.444Z,1513241926.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:46.477Z,1513241926.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:46.838Z,1513241926.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:46.854Z,1513241926.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:46.898Z,1513241926.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:47.220Z,1513241927.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:47.243Z,1513241927.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:47.269Z,1513241927.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:47.624Z,1513241927.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:47.640Z,1513241927.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:48.025Z,1513241928.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:48.047Z,1513241928.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:48.066Z,1513241928.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:48.417Z,1513241928.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:48.621Z,1513241928.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:48.803Z,1513241928.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:48.835Z,1513241928.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:48.865Z,1513241928.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:49.202Z,1513241929.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:49.239Z,1513241929.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:49.269Z,1513241929.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:49.643Z,1513241929.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:49.698Z,1513241929.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:50.007Z,1513241930.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:50.035Z,1513241930.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:50.082Z,1513241930.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:50.446Z,1513241930.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:50.535Z,1513241930.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:50.821Z,1513241930.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:50.836Z,1513241930.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:50.877Z,1513241930.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:51.221Z,1513241931.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:51.236Z,1513241931.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:51.614Z,1513241931.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:51.629Z,1513241931.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:51.674Z,1513241931.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:52.015Z,1513241932.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:52.029Z,1513241932.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:52.416Z,1513241932.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:52.471Z,1513241932.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:52.498Z,1513241932.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:52.807Z,1513241932.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:52.843Z,1513241932.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:52.890Z,1513241932.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:53.237Z,1513241933.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:53.252Z,1513241933.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:53.613Z,1513241933.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:53.644Z,1513241933.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:53.686Z,1513241933.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:54.021Z,1513241934.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:54.046Z,1513241934.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:54.407Z,1513241934.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:54.482Z,1513241934.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:54.484Z,1513241934.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:54.806Z,1513241934.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:54.833Z,1513241934.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:54.893Z,1513241934.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:55.215Z,1513241935.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:55.229Z,1513241935.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:55.614Z,1513241935.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:55.628Z,1513241935.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:55.690Z,1513241935.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:56.020Z,1513241936.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:56.043Z,1513241936.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:56.420Z,1513241936.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:56.436Z,1513241936.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:56.487Z,1513241936.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:56.824Z,1513241936.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:56.844Z,1513241936.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:56.937Z,1513241936.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:57.225Z,1513241937.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:57.240Z,1513241937.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:57.602Z,1513241937.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:57.629Z,1513241937.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:57.733Z,1513241937.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:58.007Z,1513241938.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:58.039Z,1513241938.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:58.408Z,1513241938.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:58.439Z,1513241938.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:58.529Z,1513241938.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:58.861Z,1513241938.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:58.917Z,1513241938.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:59.250Z,1513241939.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:59.264Z,1513241939.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:59.332Z,1513241939.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:58:59.630Z,1513241939.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:58:59.645Z,1513241939.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:00.013Z,1513241940.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:00.043Z,1513241940.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:00.045Z,1513241940.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:00.411Z,1513241940.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:00.442Z,1513241940.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:00.842Z,1513241940.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:00.860Z,1513241940.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:00.911Z,1513241940.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:01.207Z,1513241941.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:01.240Z,1513241941.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:01.245Z,1513241941.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:01.607Z,1513241941.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:01.622Z,1513241941.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:02.005Z,1513241942.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:02.020Z,1513241942.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:02.042Z,1513241942.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:02.475Z,1513241942.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:02.543Z,1513241942.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:02.829Z,1513241942.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:02.837Z,1513241942.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:02.871Z,1513241942.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:03.222Z,1513241943.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:03.241Z,1513241943.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:03.256Z,1513241943.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:03.607Z,1513241943.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:03.623Z,1513241943.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:04.006Z,1513241944.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:04.020Z,1513241944.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:04.038Z,1513241944.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:04.415Z,1513241944.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:04.514Z,1513241944.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:04.811Z,1513241944.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:04.825Z,1513241944.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:04.833Z,1513241944.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:05.226Z,1513241945.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:05.237Z,1513241945.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:05.242Z,1513241945.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:05.625Z,1513241945.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:05.640Z,1513241945.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:06.020Z,1513241946.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:06.034Z,1513241946.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:06.041Z,1513241946.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:06.403Z,1513241946.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:06.489Z,1513241946.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:06.807Z,1513241946.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:06.829Z,1513241946.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:06.847Z,1513241946.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:07.207Z,1513241947.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:07.233Z,1513241947.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:07.246Z,1513241947.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:07.605Z,1513241947.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:07.620Z,1513241947.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:08.003Z,1513241948.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:08.019Z,1513241948.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:08.034Z,1513241948.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:08.443Z,1513241948.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:08.508Z,1513241948.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:08.832Z,1513241948.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:08.835Z,1513241948.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:08.860Z,1513241948.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:09.214Z,1513241949.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:09.237Z,1513241949.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:09.244Z,1513241949.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:09.603Z,1513241949.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:09.626Z,1513241949.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:10.007Z,1513241950.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:10.034Z,1513241950.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:10.048Z,1513241950.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:10.404Z,1513241950.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:10.418Z,1513241950.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:10.811Z,1513241950.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:10.829Z,1513241950.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:10.880Z,1513241950.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:11.218Z,1513241951.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:11.233Z,1513241951.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:11.240Z,1513241951.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:11.254Z,1513241951.254 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T08:59:11.626Z,1513241951.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:11.731Z,1513241951.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:12.030Z,1513241952.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:12.828Z,1513241952.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:13.233Z,1513241953.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:14.029Z,1513241954.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:14.826Z,1513241954.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:15.124Z,1513241955.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:15.154Z,1513241955.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:15.229Z,1513241955.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:15.275Z,1513241955.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:15.351Z,1513241955.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:15.351Z,1513241955.351 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169
2017-12-14T08:59:15.351Z,1513241955.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T08:59:15.357Z,1513241955.357 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:15.357Z,1513241955.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 169
2017-12-14T08:59:15.357Z,1513241955.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T08:59:15.359Z,1513241955.359 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:15.359Z,1513241955.359 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169
2017-12-14T08:59:15.359Z,1513241955.359 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T08:59:15.380Z,1513241955.380 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T08:59:15.380Z,1513241955.380 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T08:59:15.385Z,1513241955.385 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T08:59:15.606Z,1513241955.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:15.659Z,1513241955.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T08:59:15.659Z,1513241955.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169
2017-12-14T08:59:15.660Z,1513241955.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T08:59:15.660Z,1513241955.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 169
2017-12-14T08:59:15.660Z,1513241955.660 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T08:59:15.661Z,1513241955.661 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169
2017-12-14T08:59:16.016Z,1513241956.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:16.026Z,1513241956.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:16.031Z,1513241956.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T08:59:16.032Z,1513241956.032 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:59:16.032Z,1513241956.032 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:59:16.033Z,1513241956.033 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T08:59:16.033Z,1513241956.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:59:16.034Z,1513241956.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:59:16.034Z,1513241956.034 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T08:59:16.034Z,1513241956.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T08:59:16.035Z,1513241956.035 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T08:59:16.434Z,1513241956.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:16.509Z,1513241956.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:16.807Z,1513241956.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:16.821Z,1513241956.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:16.846Z,1513241956.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:17.218Z,1513241957.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:17.225Z,1513241957.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:17.250Z,1513241957.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:17.635Z,1513241957.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:17.650Z,1513241957.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:18.030Z,1513241958.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:18.034Z,1513241958.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:18.050Z,1513241958.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:18.063Z,1513241958.063 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T08:59:18.063Z,1513241958.063 [DropWeight] No Fault, FailCount= 1
2017-12-14T08:59:18.401Z,1513241958.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:18.415Z,1513241958.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:18.809Z,1513241958.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:18.825Z,1513241958.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:18.836Z,1513241958.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:19.216Z,1513241959.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:19.229Z,1513241959.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:19.231Z,1513241959.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:19.611Z,1513241959.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:19.631Z,1513241959.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:20.016Z,1513241960.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:20.025Z,1513241960.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:20.032Z,1513241960.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:20.440Z,1513241960.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:20.524Z,1513241960.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:20.820Z,1513241960.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:20.821Z,1513241960.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:20.838Z,1513241960.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:21.225Z,1513241961.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:21.226Z,1513241961.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:21.240Z,1513241961.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:21.609Z,1513241961.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:21.635Z,1513241961.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:22.003Z,1513241962.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:22.022Z,1513241962.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:22.047Z,1513241962.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:22.404Z,1513241962.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:22.451Z,1513241962.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:22.809Z,1513241962.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:22.817Z,1513241962.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:22.825Z,1513241962.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:23.221Z,1513241963.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:23.252Z,1513241963.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:23.465Z,1513241963.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:23.621Z,1513241963.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:23.671Z,1513241963.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:24.025Z,1513241964.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:24.059Z,1513241964.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:24.261Z,1513241964.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:24.409Z,1513241964.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:24.424Z,1513241964.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:24.848Z,1513241964.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:24.893Z,1513241964.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:24.926Z,1513241964.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:25.212Z,1513241965.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:25.227Z,1513241965.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:25.610Z,1513241965.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:25.636Z,1513241965.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:25.722Z,1513241965.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:26.019Z,1513241966.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:26.035Z,1513241966.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:26.421Z,1513241966.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:26.436Z,1513241966.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:26.517Z,1513241966.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:26.882Z,1513241966.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:26.915Z,1513241966.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:27.222Z,1513241967.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:27.233Z,1513241967.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:27.240Z,1513241967.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:27.615Z,1513241967.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:27.630Z,1513241967.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:28.030Z,1513241968.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:28.047Z,1513241968.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:28.084Z,1513241968.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:28.409Z,1513241968.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:28.432Z,1513241968.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:28.826Z,1513241968.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:28.858Z,1513241968.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:28.899Z,1513241968.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:29.217Z,1513241969.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:29.233Z,1513241969.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:29.244Z,1513241969.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:29.632Z,1513241969.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:29.646Z,1513241969.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:30.014Z,1513241970.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:30.030Z,1513241970.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:30.044Z,1513241970.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:30.403Z,1513241970.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:30.419Z,1513241970.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:30.812Z,1513241970.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:30.825Z,1513241970.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:30.835Z,1513241970.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:31.229Z,1513241971.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:31.230Z,1513241971.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:31.274Z,1513241971.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:31.622Z,1513241971.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:31.636Z,1513241971.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:32.016Z,1513241972.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:32.026Z,1513241972.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:32.032Z,1513241972.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:32.428Z,1513241972.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:32.513Z,1513241972.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:32.822Z,1513241972.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:32.846Z,1513241972.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:32.867Z,1513241972.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:33.222Z,1513241973.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:33.225Z,1513241973.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:33.259Z,1513241973.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:33.609Z,1513241973.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:33.624Z,1513241973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:34.009Z,1513241974.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:34.022Z,1513241974.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:34.025Z,1513241974.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:34.486Z,1513241974.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:34.534Z,1513241974.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:34.803Z,1513241974.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:34.817Z,1513241974.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:34.843Z,1513241974.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:35.221Z,1513241975.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:35.234Z,1513241975.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:35.291Z,1513241975.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:35.616Z,1513241975.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:35.667Z,1513241975.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:36.012Z,1513241976.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:36.017Z,1513241976.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:36.044Z,1513241976.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:36.401Z,1513241976.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:36.488Z,1513241976.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:36.807Z,1513241976.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:36.813Z,1513241976.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:36.839Z,1513241976.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:37.211Z,1513241977.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:37.217Z,1513241977.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:37.270Z,1513241977.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:37.612Z,1513241977.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:37.627Z,1513241977.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:38.003Z,1513241978.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:38.013Z,1513241978.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:38.036Z,1513241978.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:38.413Z,1513241978.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:38.428Z,1513241978.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:38.809Z,1513241978.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:38.851Z,1513241978.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:38.875Z,1513241978.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:39.214Z,1513241979.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:39.224Z,1513241979.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:39.251Z,1513241979.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:39.615Z,1513241979.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:39.631Z,1513241979.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:40.010Z,1513241980.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:40.019Z,1513241980.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:40.034Z,1513241980.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:40.416Z,1513241980.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:40.431Z,1513241980.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:40.807Z,1513241980.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:40.851Z,1513241980.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:40.891Z,1513241980.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:41.222Z,1513241981.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:41.249Z,1513241981.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:41.269Z,1513241981.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:41.628Z,1513241981.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:41.644Z,1513241981.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:42.013Z,1513241982.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:42.043Z,1513241982.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:42.096Z,1513241982.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:42.397Z,1513241982.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:42.411Z,1513241982.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:42.854Z,1513241982.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:42.889Z,1513241982.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:42.893Z,1513241982.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:43.204Z,1513241983.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:43.239Z,1513241983.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:43.293Z,1513241983.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:43.608Z,1513241983.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:43.623Z,1513241983.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:44.007Z,1513241984.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:44.047Z,1513241984.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:44.090Z,1513241984.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:44.438Z,1513241984.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:44.516Z,1513241984.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:44.818Z,1513241984.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:44.832Z,1513241984.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:44.890Z,1513241984.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:45.234Z,1513241985.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:45.248Z,1513241985.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:45.293Z,1513241985.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:45.603Z,1513241985.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:45.669Z,1513241985.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:46.007Z,1513241986.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:46.033Z,1513241986.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:46.090Z,1513241986.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:46.408Z,1513241986.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:46.498Z,1513241986.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:46.807Z,1513241986.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:46.843Z,1513241986.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:46.885Z,1513241986.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:47.231Z,1513241987.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:47.246Z,1513241987.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:47.289Z,1513241987.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:47.631Z,1513241987.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:47.645Z,1513241987.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:48.028Z,1513241988.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:48.058Z,1513241988.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:48.086Z,1513241988.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:48.403Z,1513241988.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:48.488Z,1513241988.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:48.814Z,1513241988.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:48.829Z,1513241988.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:48.881Z,1513241988.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:49.214Z,1513241989.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:49.229Z,1513241989.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:49.614Z,1513241989.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:49.628Z,1513241989.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:49.677Z,1513241989.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:50.008Z,1513241990.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:50.035Z,1513241990.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:50.464Z,1513241990.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:50.474Z,1513241990.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:50.532Z,1513241990.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:50.821Z,1513241990.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:50.836Z,1513241990.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:50.905Z,1513241990.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:51.256Z,1513241991.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:51.276Z,1513241991.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:51.620Z,1513241991.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:51.635Z,1513241991.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:51.704Z,1513241991.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:52.014Z,1513241992.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:52.029Z,1513241992.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:52.412Z,1513241992.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:52.429Z,1513241992.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:52.499Z,1513241992.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:52.803Z,1513241992.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:52.838Z,1513241992.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:52.925Z,1513241992.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:53.225Z,1513241993.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:53.247Z,1513241993.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:53.632Z,1513241993.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:53.647Z,1513241993.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:53.722Z,1513241993.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:54.022Z,1513241994.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:54.053Z,1513241994.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:54.454Z,1513241994.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:54.489Z,1513241994.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:54.521Z,1513241994.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:54.847Z,1513241994.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:54.890Z,1513241994.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:55.209Z,1513241995.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:55.225Z,1513241995.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:55.266Z,1513241995.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:55.608Z,1513241995.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:55.647Z,1513241995.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:56.014Z,1513241996.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:56.030Z,1513241996.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:56.061Z,1513241996.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:56.426Z,1513241996.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:56.461Z,1513241996.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:56.858Z,1513241996.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:56.877Z,1513241996.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:56.892Z,1513241996.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:57.221Z,1513241997.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:57.239Z,1513241997.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:57.261Z,1513241997.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:57.642Z,1513241997.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:57.667Z,1513241997.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:58.004Z,1513241998.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:58.058Z,1513241998.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:58.092Z,1513241998.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:58.405Z,1513241998.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:58.502Z,1513241998.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:58.808Z,1513241998.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:58.847Z,1513241998.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:58.854Z,1513241998.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:59.217Z,1513241999.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:59.246Z,1513241999.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T08:59:59.257Z,1513241999.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:59.618Z,1513241999.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T08:59:59.663Z,1513241999.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:00.022Z,1513242000.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:00.051Z,1513242000.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:00.055Z,1513242000.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:00.410Z,1513242000.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:00.490Z,1513242000.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:00.818Z,1513242000.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:00.850Z,1513242000.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:00.852Z,1513242000.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:01.227Z,1513242001.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:01.247Z,1513242001.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:01.254Z,1513242001.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:01.607Z,1513242001.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:01.637Z,1513242001.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:02.007Z,1513242002.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:02.034Z,1513242002.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:02.050Z,1513242002.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:02.445Z,1513242002.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:02.521Z,1513242002.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:02.829Z,1513242002.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:02.846Z,1513242002.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:02.847Z,1513242002.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:03.231Z,1513242003.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:03.247Z,1513242003.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:03.249Z,1513242003.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:03.605Z,1513242003.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:03.636Z,1513242003.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:04.005Z,1513242004.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:04.046Z,1513242004.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:04.073Z,1513242004.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:04.404Z,1513242004.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:04.490Z,1513242004.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:04.811Z,1513242004.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:04.842Z,1513242004.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:04.846Z,1513242004.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:05.220Z,1513242005.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:05.245Z,1513242005.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:05.248Z,1513242005.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:05.618Z,1513242005.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:05.649Z,1513242005.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:06.022Z,1513242006.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:06.042Z,1513242006.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:06.057Z,1513242006.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:06.404Z,1513242006.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:06.419Z,1513242006.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:06.806Z,1513242006.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:06.829Z,1513242006.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:06.838Z,1513242006.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:07.242Z,1513242007.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:07.260Z,1513242007.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:07.283Z,1513242007.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:07.613Z,1513242007.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:07.631Z,1513242007.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:08.016Z,1513242008.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:08.038Z,1513242008.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:08.074Z,1513242008.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:08.422Z,1513242008.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:08.439Z,1513242008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:08.834Z,1513242008.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:08.879Z,1513242008.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:08.914Z,1513242008.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:09.225Z,1513242009.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:09.237Z,1513242009.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:09.242Z,1513242009.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:09.615Z,1513242009.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:09.635Z,1513242009.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:10.003Z,1513242010.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:10.034Z,1513242010.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:10.036Z,1513242010.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:10.426Z,1513242010.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:10.466Z,1513242010.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:10.830Z,1513242010.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:10.854Z,1513242010.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:10.894Z,1513242010.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:10.898Z,1513242010.898 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T08:55:10.9Z
2017-12-14T09:00:10.898Z,1513242010.898 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:00:10.898Z,1513242010.898 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:00:11.232Z,1513242011.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:11.246Z,1513242011.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:11.265Z,1513242011.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:11.991Z,1513242011.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:12.011Z,1513242012.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:12.062Z,1513242012.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:12.118Z,1513242012.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:12.152Z,1513242012.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:12.861Z,1513242012.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:13.265Z,1513242013.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:14.062Z,1513242014.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:14.858Z,1513242014.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:15.261Z,1513242015.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:15.557Z,1513242015.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:15.594Z,1513242015.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:15.669Z,1513242015.669 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0196.lzma
2017-12-14T09:00:15.700Z,1513242015.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:15.738Z,1513242015.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:16.058Z,1513242016.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:16.064Z,1513242016.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:16.146Z,1513242016.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:16.419Z,1513242016.419 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0196.lzma.bak
2017-12-14T09:00:16.433Z,1513242016.433 [DataOverHttps](INFO): SBD MOMSN=5438376
2017-12-14T09:00:16.515Z,1513242016.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:16.550Z,1513242016.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:16.854Z,1513242016.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:17.257Z,1513242017.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:17.698Z,1513242017.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:17.714Z,1513242017.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:17.821Z,1513242017.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:17.855Z,1513242017.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:18.054Z,1513242018.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:18.849Z,1513242018.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:19.253Z,1513242019.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:20.050Z,1513242020.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:20.845Z,1513242020.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:21.249Z,1513242021.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:21.308Z,1513242021.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:21.396Z,1513242021.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:21.492Z,1513242021.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:21.533Z,1513242021.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:21.861Z,1513242021.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:21.878Z,1513242021.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:22.261Z,1513242022.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:22.302Z,1513242022.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:22.659Z,1513242022.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:22.676Z,1513242022.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:23.045Z,1513242023.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:23.092Z,1513242023.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:26.371Z,1513242026.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:26.399Z,1513242026.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:26.534Z,1513242026.534 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0197.lzma
2017-12-14T09:00:26.600Z,1513242026.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:26.639Z,1513242026.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:26.983Z,1513242026.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:27.011Z,1513242027.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:27.339Z,1513242027.339 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0197.lzma.bak
2017-12-14T09:00:27.340Z,1513242027.340 [DataOverHttps](INFO): SBD MOMSN=5438378
2017-12-14T09:00:27.400Z,1513242027.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:27.415Z,1513242027.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:28.610Z,1513242028.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:28.625Z,1513242028.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:28.628Z,1513242028.628 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:00:28.628Z,1513242028.628 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:00:28.629Z,1513242028.629 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:00:28.733Z,1513242028.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:28.766Z,1513242028.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:32.085Z,1513242032.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:32.132Z,1513242032.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:32.232Z,1513242032.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:32.273Z,1513242032.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:32.595Z,1513242032.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:32.633Z,1513242032.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:33.004Z,1513242033.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:33.064Z,1513242033.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:33.398Z,1513242033.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:33.423Z,1513242033.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:33.786Z,1513242033.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:33.800Z,1513242033.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:34.187Z,1513242034.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:34.201Z,1513242034.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:34.585Z,1513242034.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:34.601Z,1513242034.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:34.988Z,1513242034.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:35.007Z,1513242035.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:35.401Z,1513242035.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:35.433Z,1513242035.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:35.786Z,1513242035.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:35.801Z,1513242035.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:36.212Z,1513242036.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:36.240Z,1513242036.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:36.583Z,1513242036.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:36.614Z,1513242036.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:36.985Z,1513242036.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:37.007Z,1513242037.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:37.399Z,1513242037.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:37.414Z,1513242037.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:37.783Z,1513242037.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:37.797Z,1513242037.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:38.190Z,1513242038.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:38.282Z,1513242038.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:38.593Z,1513242038.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:38.608Z,1513242038.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:38.999Z,1513242038.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:39.019Z,1513242039.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:39.379Z,1513242039.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:39.399Z,1513242039.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:39.780Z,1513242039.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:39.795Z,1513242039.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:40.179Z,1513242040.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:40.199Z,1513242040.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:40.582Z,1513242040.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:40.597Z,1513242040.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:41.002Z,1513242041.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:41.029Z,1513242041.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:41.391Z,1513242041.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:41.418Z,1513242041.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:41.796Z,1513242041.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:41.829Z,1513242041.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:42.203Z,1513242042.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:42.224Z,1513242042.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:42.579Z,1513242042.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:42.602Z,1513242042.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:42.985Z,1513242042.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:43.039Z,1513242043.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:43.381Z,1513242043.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:43.415Z,1513242043.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:43.779Z,1513242043.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:43.808Z,1513242043.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:44.190Z,1513242044.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:44.271Z,1513242044.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:44.593Z,1513242044.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:44.616Z,1513242044.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:45.014Z,1513242045.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:45.067Z,1513242045.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:45.382Z,1513242045.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:45.397Z,1513242045.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:45.788Z,1513242045.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:45.843Z,1513242045.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:46.187Z,1513242046.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:46.224Z,1513242046.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:46.588Z,1513242046.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:46.603Z,1513242046.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:46.986Z,1513242046.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:47.000Z,1513242047.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:47.397Z,1513242047.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:47.424Z,1513242047.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:47.794Z,1513242047.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:47.808Z,1513242047.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:48.198Z,1513242048.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:48.212Z,1513242048.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:48.589Z,1513242048.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:48.618Z,1513242048.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:48.991Z,1513242048.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:49.006Z,1513242049.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:49.395Z,1513242049.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:49.410Z,1513242049.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:49.794Z,1513242049.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:49.808Z,1513242049.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:50.224Z,1513242050.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:50.247Z,1513242050.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:50.603Z,1513242050.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:50.618Z,1513242050.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:51.004Z,1513242051.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:51.023Z,1513242051.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:51.383Z,1513242051.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:51.410Z,1513242051.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:51.794Z,1513242051.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:51.809Z,1513242051.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:52.204Z,1513242052.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:52.241Z,1513242052.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:52.603Z,1513242052.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:52.618Z,1513242052.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:53.006Z,1513242053.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:53.021Z,1513242053.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:53.404Z,1513242053.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:53.423Z,1513242053.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:53.792Z,1513242053.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:53.813Z,1513242053.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:54.186Z,1513242054.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:54.246Z,1513242054.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:54.650Z,1513242054.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:54.665Z,1513242054.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:55.002Z,1513242055.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:55.016Z,1513242055.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:55.435Z,1513242055.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:55.524Z,1513242055.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:55.789Z,1513242055.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:55.804Z,1513242055.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:56.193Z,1513242056.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:56.207Z,1513242056.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:56.589Z,1513242056.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:56.607Z,1513242056.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:56.996Z,1513242056.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:57.011Z,1513242057.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:57.391Z,1513242057.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:57.406Z,1513242057.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:57.803Z,1513242057.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:57.818Z,1513242057.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:58.283Z,1513242058.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:58.298Z,1513242058.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:58.599Z,1513242058.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:58.659Z,1513242058.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:58.979Z,1513242058.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:59.007Z,1513242059.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:59.402Z,1513242059.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:59.417Z,1513242059.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:00:59.795Z,1513242059.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:00:59.811Z,1513242059.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:00.178Z,1513242060.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:00.205Z,1513242060.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:00.602Z,1513242060.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:00.619Z,1513242060.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:01.002Z,1513242061.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:01.018Z,1513242061.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:01.398Z,1513242061.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:01.419Z,1513242061.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:01.804Z,1513242061.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:01.851Z,1513242061.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:02.181Z,1513242062.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:02.207Z,1513242062.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:02.579Z,1513242062.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:02.673Z,1513242062.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:02.980Z,1513242062.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:03.007Z,1513242063.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:03.379Z,1513242063.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:03.404Z,1513242063.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:03.796Z,1513242063.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:03.815Z,1513242063.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:04.207Z,1513242064.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:04.222Z,1513242064.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:04.594Z,1513242064.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:04.617Z,1513242064.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:04.983Z,1513242064.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:05.020Z,1513242065.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:05.400Z,1513242065.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:05.416Z,1513242065.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:05.792Z,1513242065.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:05.817Z,1513242065.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:06.179Z,1513242066.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:06.238Z,1513242066.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:06.597Z,1513242066.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:06.623Z,1513242066.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:07.002Z,1513242067.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:07.051Z,1513242067.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:07.395Z,1513242067.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:07.433Z,1513242067.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:07.784Z,1513242067.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:07.799Z,1513242067.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:08.200Z,1513242068.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:08.287Z,1513242068.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:08.588Z,1513242068.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:08.607Z,1513242068.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:08.993Z,1513242068.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:09.043Z,1513242069.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:09.387Z,1513242069.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:09.407Z,1513242069.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:09.794Z,1513242069.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:09.809Z,1513242069.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:10.197Z,1513242070.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:10.211Z,1513242070.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:10.592Z,1513242070.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:10.612Z,1513242070.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:11.014Z,1513242071.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:11.091Z,1513242071.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:11.413Z,1513242071.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:11.481Z,1513242071.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:11.790Z,1513242071.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:11.811Z,1513242071.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:12.190Z,1513242072.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:12.205Z,1513242072.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:12.594Z,1513242072.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:12.615Z,1513242072.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:12.994Z,1513242072.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:13.008Z,1513242073.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:13.393Z,1513242073.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:13.415Z,1513242073.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:13.786Z,1513242073.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:13.801Z,1513242073.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:14.183Z,1513242074.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:14.198Z,1513242074.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:14.611Z,1513242074.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:14.659Z,1513242074.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:14.979Z,1513242074.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:15.007Z,1513242075.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:15.394Z,1513242075.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:15.409Z,1513242075.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:15.801Z,1513242075.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:15.815Z,1513242075.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:16.203Z,1513242076.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:16.218Z,1513242076.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:16.610Z,1513242076.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:16.656Z,1513242076.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:16.982Z,1513242076.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:17.063Z,1513242077.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:17.417Z,1513242077.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:17.600Z,1513242077.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:17.815Z,1513242077.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:17.864Z,1513242077.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:18.202Z,1513242078.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:18.227Z,1513242078.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:18.592Z,1513242078.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:18.646Z,1513242078.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:18.999Z,1513242078.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:19.022Z,1513242079.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:19.401Z,1513242079.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:19.436Z,1513242079.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:19.802Z,1513242079.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:19.821Z,1513242079.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:20.200Z,1513242080.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:20.225Z,1513242080.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:20.581Z,1513242080.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:20.614Z,1513242080.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:20.981Z,1513242080.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:21.022Z,1513242081.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:21.392Z,1513242081.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:21.435Z,1513242081.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:21.825Z,1513242081.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:21.844Z,1513242081.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:22.205Z,1513242082.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:22.245Z,1513242082.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:22.589Z,1513242082.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:22.632Z,1513242082.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:23.012Z,1513242083.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:23.053Z,1513242083.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:23.394Z,1513242083.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:23.443Z,1513242083.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:23.800Z,1513242083.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:23.834Z,1513242083.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:24.199Z,1513242084.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:24.213Z,1513242084.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:24.632Z,1513242084.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:24.665Z,1513242084.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:24.990Z,1513242084.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:25.005Z,1513242085.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:25.390Z,1513242085.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:25.405Z,1513242085.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:25.806Z,1513242085.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:25.831Z,1513242085.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:26.194Z,1513242086.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:26.231Z,1513242086.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:26.618Z,1513242086.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:26.648Z,1513242086.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:26.993Z,1513242086.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:27.045Z,1513242087.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:27.402Z,1513242087.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:27.448Z,1513242087.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:27.846Z,1513242087.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:27.879Z,1513242087.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:28.218Z,1513242088.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:28.290Z,1513242088.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:28.583Z,1513242088.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:28.628Z,1513242088.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:29.007Z,1513242089.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:29.030Z,1513242089.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:29.411Z,1513242089.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:29.514Z,1513242089.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:37.009Z,1513242097.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:37.046Z,1513242097.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:37.171Z,1513242097.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:37.215Z,1513242097.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:37.546Z,1513242097.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:37.626Z,1513242097.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:37.940Z,1513242097.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:37.975Z,1513242097.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:38.311Z,1513242098.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:38.367Z,1513242098.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:38.729Z,1513242098.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:38.735Z,1513242098.735 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T09:01:38.783Z,1513242098.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:39.131Z,1513242099.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:39.156Z,1513242099.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:39.512Z,1513242099.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:39.555Z,1513242099.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:39.901Z,1513242099.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:39.951Z,1513242099.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:40.336Z,1513242100.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:40.368Z,1513242100.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:40.750Z,1513242100.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:40.800Z,1513242100.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:41.117Z,1513242101.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:41.167Z,1513242101.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:41.513Z,1513242101.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:41.559Z,1513242101.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:41.937Z,1513242101.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:41.971Z,1513242101.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:42.325Z,1513242102.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:42.383Z,1513242102.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:42.700Z,1513242102.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:42.751Z,1513242102.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:43.110Z,1513242103.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:43.163Z,1513242103.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:43.504Z,1513242103.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:43.600Z,1513242103.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:43.907Z,1513242103.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:43.930Z,1513242103.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:44.307Z,1513242104.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:44.354Z,1513242104.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:44.725Z,1513242104.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:44.741Z,1513242104.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:45.125Z,1513242105.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:45.141Z,1513242105.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:45.524Z,1513242105.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:45.551Z,1513242105.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:45.915Z,1513242105.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:45.943Z,1513242105.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:46.299Z,1513242106.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:46.334Z,1513242106.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:46.719Z,1513242106.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:46.839Z,1513242106.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:47.130Z,1513242107.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:47.175Z,1513242107.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:47.518Z,1513242107.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:47.554Z,1513242107.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:47.928Z,1513242107.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:47.948Z,1513242107.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:48.330Z,1513242108.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:48.337Z,1513242108.337 [PNI_TCM](ERROR): CRC does not match. Expected:0x40096 got:0x36830
2017-12-14T09:01:48.355Z,1513242108.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:48.707Z,1513242108.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:48.736Z,1513242108.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:49.099Z,1513242109.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:49.150Z,1513242109.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:49.499Z,1513242109.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:49.514Z,1513242109.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:49.904Z,1513242109.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:49.963Z,1513242109.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:50.315Z,1513242110.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:50.330Z,1513242110.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:50.713Z,1513242110.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:50.751Z,1513242110.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:51.127Z,1513242111.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:51.159Z,1513242111.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:51.513Z,1513242111.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:51.536Z,1513242111.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:51.920Z,1513242111.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:51.934Z,1513242111.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:52.299Z,1513242112.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:52.354Z,1513242112.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:52.714Z,1513242112.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:52.737Z,1513242112.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:53.150Z,1513242113.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:53.208Z,1513242113.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:53.535Z,1513242113.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:53.558Z,1513242113.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:53.918Z,1513242113.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:53.955Z,1513242113.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:54.320Z,1513242114.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:54.339Z,1513242114.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:54.720Z,1513242114.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:54.735Z,1513242114.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:55.154Z,1513242115.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:55.170Z,1513242115.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:55.503Z,1513242115.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:55.530Z,1513242115.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:55.912Z,1513242115.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:55.936Z,1513242115.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:56.324Z,1513242116.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:56.359Z,1513242116.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:56.737Z,1513242116.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:56.760Z,1513242116.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:57.125Z,1513242117.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:57.160Z,1513242117.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:57.513Z,1513242117.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:57.562Z,1513242117.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:57.910Z,1513242117.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:57.922Z,1513242117.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x64457 got:0x96
2017-12-14T09:01:57.957Z,1513242117.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:58.312Z,1513242118.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:58.328Z,1513242118.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:58.720Z,1513242118.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:58.826Z,1513242118.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:59.109Z,1513242119.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:59.136Z,1513242119.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:59.522Z,1513242119.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:59.567Z,1513242119.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:01:59.925Z,1513242119.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:01:59.939Z,1513242119.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:00.317Z,1513242120.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:00.367Z,1513242120.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:00.708Z,1513242120.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:00.730Z,1513242120.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:01.113Z,1513242121.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:01.151Z,1513242121.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:01.509Z,1513242121.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:01.524Z,1513242121.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:01.904Z,1513242121.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:01.951Z,1513242121.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:02.303Z,1513242122.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:02.331Z,1513242122.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:02.733Z,1513242122.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:02.879Z,1513242122.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:03.129Z,1513242123.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:03.167Z,1513242123.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:03.514Z,1513242123.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:03.555Z,1513242123.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:03.908Z,1513242123.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:03.930Z,1513242123.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:04.307Z,1513242124.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:04.330Z,1513242124.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:04.714Z,1513242124.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:04.739Z,1513242124.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:05.108Z,1513242125.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:05.143Z,1513242125.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:05.511Z,1513242125.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:05.538Z,1513242125.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:05.921Z,1513242125.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:05.936Z,1513242125.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:06.323Z,1513242126.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:06.338Z,1513242126.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:06.708Z,1513242126.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:06.742Z,1513242126.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:07.099Z,1513242127.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:07.142Z,1513242127.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:07.503Z,1513242127.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:07.536Z,1513242127.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:07.902Z,1513242127.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:07.943Z,1513242127.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:08.304Z,1513242128.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:08.347Z,1513242128.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:08.730Z,1513242128.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:08.772Z,1513242128.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:09.139Z,1513242129.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:09.189Z,1513242129.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:09.520Z,1513242129.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:09.542Z,1513242129.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:09.906Z,1513242129.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:09.948Z,1513242129.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:10.307Z,1513242130.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:10.348Z,1513242130.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:10.713Z,1513242130.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:10.731Z,1513242130.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:11.114Z,1513242131.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:11.129Z,1513242131.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:11.510Z,1513242131.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:11.555Z,1513242131.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:11.914Z,1513242131.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:11.936Z,1513242131.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:12.318Z,1513242132.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:12.333Z,1513242132.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:12.714Z,1513242132.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:12.729Z,1513242132.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:13.110Z,1513242133.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:13.149Z,1513242133.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:13.508Z,1513242133.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:13.530Z,1513242133.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:13.906Z,1513242133.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:13.928Z,1513242133.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:14.316Z,1513242134.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:14.335Z,1513242134.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:14.714Z,1513242134.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:14.803Z,1513242134.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:15.126Z,1513242135.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:15.142Z,1513242135.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:15.524Z,1513242135.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:15.539Z,1513242135.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:15.910Z,1513242135.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:15.944Z,1513242135.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:16.028Z,1513242136.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:16.305Z,1513242136.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:16.358Z,1513242136.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:16.359Z,1513242136.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170
2017-12-14T09:02:16.359Z,1513242136.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:02:16.360Z,1513242136.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:16.360Z,1513242136.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 170
2017-12-14T09:02:16.361Z,1513242136.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:02:16.363Z,1513242136.363 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:16.363Z,1513242136.363 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170
2017-12-14T09:02:16.363Z,1513242136.363 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:02:16.407Z,1513242136.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:02:16.407Z,1513242136.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:02:16.407Z,1513242136.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:02:16.705Z,1513242136.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:16.817Z,1513242136.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:02:16.818Z,1513242136.818 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170
2017-12-14T09:02:16.819Z,1513242136.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:02:16.819Z,1513242136.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 170
2017-12-14T09:02:16.819Z,1513242136.819 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:02:16.819Z,1513242136.819 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170
2017-12-14T09:02:16.822Z,1513242136.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:17.113Z,1513242137.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:17.129Z,1513242137.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:02:17.129Z,1513242137.129 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:02:17.129Z,1513242137.129 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:02:17.130Z,1513242137.130 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:02:17.130Z,1513242137.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:02:17.131Z,1513242137.131 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:02:17.131Z,1513242137.131 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:02:17.131Z,1513242137.131 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:02:17.132Z,1513242137.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:02:17.225Z,1513242137.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:17.530Z,1513242137.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:17.546Z,1513242137.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:17.930Z,1513242137.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:17.966Z,1513242137.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:18.332Z,1513242138.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:18.351Z,1513242138.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:18.699Z,1513242138.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:18.740Z,1513242138.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:19.101Z,1513242139.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:19.134Z,1513242139.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:19.503Z,1513242139.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:19.539Z,1513242139.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:19.901Z,1513242139.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:19.940Z,1513242139.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:20.304Z,1513242140.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:20.339Z,1513242140.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:20.726Z,1513242140.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:20.829Z,1513242140.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:21.117Z,1513242141.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:21.153Z,1513242141.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:21.526Z,1513242141.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:21.584Z,1513242141.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:21.955Z,1513242141.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:22.016Z,1513242142.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:22.297Z,1513242142.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:22.374Z,1513242142.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:22.700Z,1513242142.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:22.744Z,1513242142.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:23.099Z,1513242143.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:23.132Z,1513242143.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:23.521Z,1513242143.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:23.552Z,1513242143.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:23.928Z,1513242143.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:23.943Z,1513242143.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:24.325Z,1513242144.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:24.347Z,1513242144.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:24.695Z,1513242144.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:24.739Z,1513242144.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:25.125Z,1513242145.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:25.156Z,1513242145.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:25.503Z,1513242145.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:25.546Z,1513242145.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:25.896Z,1513242145.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:25.946Z,1513242145.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:26.305Z,1513242146.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:26.339Z,1513242146.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:26.723Z,1513242146.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:26.786Z,1513242146.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:27.123Z,1513242147.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:27.150Z,1513242147.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:27.518Z,1513242147.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:27.556Z,1513242147.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:27.907Z,1513242147.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:27.950Z,1513242147.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:28.318Z,1513242148.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:28.360Z,1513242148.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:28.714Z,1513242148.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:28.747Z,1513242148.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:29.104Z,1513242149.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:29.142Z,1513242149.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:29.510Z,1513242149.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:29.544Z,1513242149.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:30.010Z,1513242150.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:30.807Z,1513242150.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:31.213Z,1513242151.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:32.009Z,1513242152.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:32.805Z,1513242152.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:33.064Z,1513242153.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:33.118Z,1513242153.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:33.210Z,1513242153.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:33.223Z,1513242153.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:33.259Z,1513242153.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:33.576Z,1513242153.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:33.607Z,1513242153.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:33.977Z,1513242153.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:34.000Z,1513242154.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:34.375Z,1513242154.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:34.403Z,1513242154.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:34.778Z,1513242154.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:34.816Z,1513242154.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:35.180Z,1513242155.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:35.219Z,1513242155.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:35.583Z,1513242155.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:35.616Z,1513242155.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:35.985Z,1513242155.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:36.023Z,1513242156.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:36.385Z,1513242156.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:36.483Z,1513242156.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:36.778Z,1513242156.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:36.792Z,1513242156.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:37.182Z,1513242157.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:37.197Z,1513242157.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:37.583Z,1513242157.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:37.598Z,1513242157.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:37.976Z,1513242157.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:38.059Z,1513242158.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:38.389Z,1513242158.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:38.405Z,1513242158.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:38.868Z,1513242158.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:38.883Z,1513242158.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:39.186Z,1513242159.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:39.216Z,1513242159.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:39.574Z,1513242159.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:39.588Z,1513242159.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:39.977Z,1513242159.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:39.991Z,1513242159.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:40.391Z,1513242160.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:40.421Z,1513242160.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:40.794Z,1513242160.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:40.831Z,1513242160.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:41.201Z,1513242161.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:41.240Z,1513242161.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:41.588Z,1513242161.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:41.604Z,1513242161.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:41.982Z,1513242161.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:41.996Z,1513242161.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:42.386Z,1513242162.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:42.400Z,1513242162.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:42.820Z,1513242162.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:42.887Z,1513242162.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:43.186Z,1513242163.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:43.215Z,1513242163.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:43.585Z,1513242163.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:43.607Z,1513242163.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:43.986Z,1513242163.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:44.001Z,1513242164.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:44.034Z,1513242164.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:44.389Z,1513242164.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:44.442Z,1513242164.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:44.830Z,1513242164.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:44.849Z,1513242164.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:44.887Z,1513242164.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:45.172Z,1513242165.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:45.187Z,1513242165.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:45.233Z,1513242165.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:45.589Z,1513242165.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:45.644Z,1513242165.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:45.989Z,1513242165.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:46.021Z,1513242166.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:46.387Z,1513242166.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:46.486Z,1513242166.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:46.772Z,1513242166.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:46.787Z,1513242166.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:47.178Z,1513242167.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:47.232Z,1513242167.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:47.598Z,1513242167.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:47.631Z,1513242167.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:47.978Z,1513242167.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:47.992Z,1513242167.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:48.384Z,1513242168.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:48.398Z,1513242168.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:48.782Z,1513242168.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:48.809Z,1513242168.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:49.194Z,1513242169.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:49.209Z,1513242169.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:49.595Z,1513242169.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:49.609Z,1513242169.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:49.965Z,1513242169.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:49.996Z,1513242169.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:50.372Z,1513242170.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:50.403Z,1513242170.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:50.821Z,1513242170.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:50.867Z,1513242170.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:51.179Z,1513242171.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:51.199Z,1513242171.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:51.589Z,1513242171.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:51.604Z,1513242171.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:51.985Z,1513242171.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:51.999Z,1513242171.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:52.382Z,1513242172.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:52.397Z,1513242172.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:52.789Z,1513242172.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:52.804Z,1513242172.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:53.187Z,1513242173.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:53.202Z,1513242173.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:53.565Z,1513242173.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:53.588Z,1513242173.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:54.011Z,1513242174.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:54.054Z,1513242174.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:54.384Z,1513242174.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:54.407Z,1513242174.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:54.795Z,1513242174.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:54.815Z,1513242174.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:55.196Z,1513242175.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:55.215Z,1513242175.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:55.597Z,1513242175.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:55.647Z,1513242175.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:55.965Z,1513242175.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:55.996Z,1513242175.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:56.375Z,1513242176.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:56.400Z,1513242176.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:56.843Z,1513242176.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:56.874Z,1513242176.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:57.220Z,1513242177.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:57.248Z,1513242177.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:57.589Z,1513242177.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:57.605Z,1513242177.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:57.990Z,1513242177.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:58.011Z,1513242178.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:58.381Z,1513242178.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:58.400Z,1513242178.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:58.832Z,1513242178.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:58.863Z,1513242178.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:59.179Z,1513242179.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:59.195Z,1513242179.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:59.573Z,1513242179.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:59.595Z,1513242179.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:02:59.978Z,1513242179.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:02:59.993Z,1513242179.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:00.045Z,1513242180.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:00.433Z,1513242180.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:00.542Z,1513242180.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:00.794Z,1513242180.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:00.809Z,1513242180.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:00.842Z,1513242180.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:01.200Z,1513242181.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:01.219Z,1513242181.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:01.245Z,1513242181.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:01.601Z,1513242181.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:01.616Z,1513242181.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:01.972Z,1513242181.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:02.011Z,1513242182.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:02.401Z,1513242182.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:02.481Z,1513242182.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:02.780Z,1513242182.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:02.795Z,1513242182.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:03.178Z,1513242183.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:03.195Z,1513242183.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:03.599Z,1513242183.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:03.619Z,1513242183.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:04.002Z,1513242184.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:04.023Z,1513242184.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:04.396Z,1513242184.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:04.411Z,1513242184.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:04.775Z,1513242184.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:04.812Z,1513242184.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:05.172Z,1513242185.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:05.188Z,1513242185.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:05.575Z,1513242185.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:05.590Z,1513242185.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:05.980Z,1513242185.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:05.995Z,1513242185.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:06.376Z,1513242186.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:06.491Z,1513242186.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:06.819Z,1513242186.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:06.868Z,1513242186.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:07.203Z,1513242187.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:07.275Z,1513242187.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:07.582Z,1513242187.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:07.672Z,1513242187.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:07.976Z,1513242187.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:08.028Z,1513242188.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:08.371Z,1513242188.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:08.388Z,1513242188.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:08.780Z,1513242188.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:08.834Z,1513242188.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:09.171Z,1513242189.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:09.207Z,1513242189.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:09.585Z,1513242189.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:09.617Z,1513242189.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:10.020Z,1513242190.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:10.064Z,1513242190.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:10.386Z,1513242190.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:10.419Z,1513242190.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:10.841Z,1513242190.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:10.872Z,1513242190.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:11.183Z,1513242191.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:11.199Z,1513242191.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:11.585Z,1513242191.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:11.600Z,1513242191.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:11.983Z,1513242191.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:11.997Z,1513242191.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:12.378Z,1513242192.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:12.407Z,1513242192.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:12.828Z,1513242192.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:12.860Z,1513242192.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:13.195Z,1513242193.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:13.227Z,1513242193.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:13.581Z,1513242193.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:13.603Z,1513242193.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:13.979Z,1513242193.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:13.995Z,1513242193.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:14.381Z,1513242194.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:14.395Z,1513242194.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:14.780Z,1513242194.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:14.814Z,1513242194.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:15.172Z,1513242195.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:15.207Z,1513242195.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:15.586Z,1513242195.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:15.615Z,1513242195.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:15.985Z,1513242195.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:16.016Z,1513242196.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:16.390Z,1513242196.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:16.482Z,1513242196.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:16.785Z,1513242196.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:16.800Z,1513242196.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:17.185Z,1513242197.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:17.235Z,1513242197.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:17.564Z,1513242197.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:17.593Z,1513242197.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:17.985Z,1513242197.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:17.000Z,1513242198.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:18.380Z,1513242198.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:18.395Z,1513242198.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:18.799Z,1513242198.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:18.815Z,1513242198.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:19.198Z,1513242199.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:19.213Z,1513242199.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:19.592Z,1513242199.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:19.611Z,1513242199.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:19.980Z,1513242199.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:20.011Z,1513242200.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:20.372Z,1513242200.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:20.399Z,1513242200.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:20.772Z,1513242200.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:20.791Z,1513242200.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:21.174Z,1513242201.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:21.189Z,1513242201.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:21.585Z,1513242201.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:21.616Z,1513242201.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:21.985Z,1513242201.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:22.019Z,1513242202.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:22.382Z,1513242202.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:22.417Z,1513242202.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:22.794Z,1513242202.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:22.867Z,1513242202.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:23.185Z,1513242203.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:23.199Z,1513242203.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:23.583Z,1513242203.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:23.599Z,1513242203.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:23.980Z,1513242203.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:23.995Z,1513242203.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:24.385Z,1513242204.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:24.400Z,1513242204.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:24.851Z,1513242204.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:24.879Z,1513242204.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:25.185Z,1513242205.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:25.215Z,1513242205.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:25.595Z,1513242205.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:25.616Z,1513242205.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:25.978Z,1513242205.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:26.030Z,1513242206.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:26.379Z,1513242206.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:26.414Z,1513242206.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:26.849Z,1513242206.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:26.890Z,1513242206.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:27.183Z,1513242207.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:27.207Z,1513242207.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:27.588Z,1513242207.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:27.612Z,1513242207.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:27.990Z,1513242207.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:28.055Z,1513242208.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:28.390Z,1513242208.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:28.411Z,1513242208.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:28.775Z,1513242208.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:28.860Z,1513242208.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:29.217Z,1513242209.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:29.244Z,1513242209.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:29.585Z,1513242209.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:29.601Z,1513242209.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:33.084Z,1513242213.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:33.141Z,1513242213.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:33.236Z,1513242213.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:33.251Z,1513242213.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:33.609Z,1513242213.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:33.674Z,1513242213.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:34.025Z,1513242214.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:34.039Z,1513242214.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:34.410Z,1513242214.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:34.500Z,1513242214.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:34.804Z,1513242214.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:34.821Z,1513242214.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:35.200Z,1513242215.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:35.215Z,1513242215.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:35.604Z,1513242215.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:35.679Z,1513242215.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:35.994Z,1513242215.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:36.012Z,1513242216.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:36.385Z,1513242216.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:36.400Z,1513242216.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:36.830Z,1513242216.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:36.855Z,1513242216.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:37.233Z,1513242217.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:37.248Z,1513242217.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:37.609Z,1513242217.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:37.642Z,1513242217.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:37.999Z,1513242217.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:38.014Z,1513242218.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:38.402Z,1513242218.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:38.416Z,1513242218.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:38.860Z,1513242218.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:38.931Z,1513242218.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:39.192Z,1513242219.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:39.223Z,1513242219.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:39.616Z,1513242219.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:39.631Z,1513242219.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:40.018Z,1513242220.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:40.034Z,1513242220.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:40.414Z,1513242220.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:40.429Z,1513242220.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:40.836Z,1513242220.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:40.887Z,1513242220.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:41.193Z,1513242221.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:41.230Z,1513242221.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:41.597Z,1513242221.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:41.629Z,1513242221.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:41.993Z,1513242221.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:42.043Z,1513242222.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:42.401Z,1513242222.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:42.496Z,1513242222.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:42.814Z,1513242222.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:42.833Z,1513242222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:43.219Z,1513242223.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:43.234Z,1513242223.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:43.615Z,1513242223.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:43.630Z,1513242223.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:43.995Z,1513242223.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:44.031Z,1513242224.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:44.391Z,1513242224.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:44.480Z,1513242224.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:44.796Z,1513242224.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:44.835Z,1513242224.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:45.221Z,1513242225.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:45.243Z,1513242225.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:45.625Z,1513242225.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:45.641Z,1513242225.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:46.002Z,1513242226.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:46.036Z,1513242226.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:46.406Z,1513242226.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:46.500Z,1513242226.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:46.860Z,1513242226.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:46.939Z,1513242226.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:47.202Z,1513242227.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:47.243Z,1513242227.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:47.598Z,1513242227.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:47.613Z,1513242227.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:47.996Z,1513242227.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:48.019Z,1513242228.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:48.502Z,1513242228.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:48.557Z,1513242228.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:48.814Z,1513242228.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:48.830Z,1513242228.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:49.215Z,1513242229.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:49.235Z,1513242229.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:49.616Z,1513242229.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:49.631Z,1513242229.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:50.005Z,1513242230.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:50.027Z,1513242230.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:50.404Z,1513242230.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:50.419Z,1513242230.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:50.792Z,1513242230.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:50.823Z,1513242230.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:51.209Z,1513242231.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:51.224Z,1513242231.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:51.619Z,1513242231.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:51.634Z,1513242231.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:51.734Z,1513242231.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:52.020Z,1513242232.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:52.039Z,1513242232.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:52.421Z,1513242232.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:52.479Z,1513242232.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:52.530Z,1513242232.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:52.856Z,1513242232.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:52.895Z,1513242232.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:53.207Z,1513242233.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:53.227Z,1513242233.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:53.607Z,1513242233.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:53.621Z,1513242233.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:54.008Z,1513242234.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:54.023Z,1513242234.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:54.409Z,1513242234.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:54.423Z,1513242234.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:54.897Z,1513242234.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:54.949Z,1513242234.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:55.222Z,1513242235.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:55.252Z,1513242235.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:55.609Z,1513242235.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:55.624Z,1513242235.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:55.998Z,1513242235.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:56.012Z,1513242236.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:56.398Z,1513242236.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:56.412Z,1513242236.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:56.801Z,1513242236.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:56.816Z,1513242236.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:57.195Z,1513242237.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:57.210Z,1513242237.210 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:03:57.210Z,1513242237.210 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:03:57.210Z,1513242237.210 [BPC1](ERROR): Communications Fault
2017-12-14T09:03:57.218Z,1513242237.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:57.257Z,1513242237.257 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:03:57.610Z,1513242237.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:57.625Z,1513242237.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:58.008Z,1513242238.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:58.036Z,1513242238.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:58.403Z,1513242238.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:58.500Z,1513242238.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:58.537Z,1513242238.537 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:03:58.537Z,1513242238.537 [BPC1] No Fault, FailCount= 1
2017-12-14T09:03:58.796Z,1513242238.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:58.888Z,1513242238.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:59.199Z,1513242239.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:59.213Z,1513242239.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:03:59.598Z,1513242239.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:03:59.613Z,1513242239.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:00.003Z,1513242240.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:00.039Z,1513242240.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:00.402Z,1513242240.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:00.470Z,1513242240.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:00.810Z,1513242240.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:00.841Z,1513242240.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:01.223Z,1513242241.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:01.246Z,1513242241.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:01.605Z,1513242241.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:01.627Z,1513242241.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:01.995Z,1513242241.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:02.035Z,1513242242.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:02.398Z,1513242242.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:02.412Z,1513242242.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:02.802Z,1513242242.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:02.816Z,1513242242.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:03.199Z,1513242243.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:03.226Z,1513242243.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:03.606Z,1513242243.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:03.622Z,1513242243.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:04.009Z,1513242244.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:04.023Z,1513242244.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:04.412Z,1513242244.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:04.444Z,1513242244.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:04.802Z,1513242244.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:04.816Z,1513242244.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:05.203Z,1513242245.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:05.217Z,1513242245.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:05.591Z,1513242245.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:05.615Z,1513242245.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:06.001Z,1513242246.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:06.017Z,1513242246.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:06.396Z,1513242246.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:06.410Z,1513242246.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:06.857Z,1513242246.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:06.915Z,1513242246.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:07.214Z,1513242247.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:07.229Z,1513242247.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:07.614Z,1513242247.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:07.629Z,1513242247.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:08.003Z,1513242248.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:08.058Z,1513242248.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:08.400Z,1513242248.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:08.416Z,1513242248.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:08.860Z,1513242248.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:08.885Z,1513242248.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:09.195Z,1513242249.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:09.220Z,1513242249.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:09.614Z,1513242249.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:09.630Z,1513242249.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:10.015Z,1513242250.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:10.029Z,1513242250.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:10.406Z,1513242250.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:10.491Z,1513242250.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:10.795Z,1513242250.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:10.812Z,1513242250.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:11.241Z,1513242251.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:11.261Z,1513242251.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:11.598Z,1513242251.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:11.612Z,1513242251.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:11.000Z,1513242252.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:12.015Z,1513242252.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:12.401Z,1513242252.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:12.466Z,1513242252.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:12.806Z,1513242252.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:12.833Z,1513242252.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:13.215Z,1513242253.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:13.235Z,1513242253.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:13.618Z,1513242253.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:13.633Z,1513242253.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:13.991Z,1513242253.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:14.023Z,1513242254.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:14.460Z,1513242254.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:14.551Z,1513242254.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:14.800Z,1513242254.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:14.814Z,1513242254.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:15.202Z,1513242255.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:15.217Z,1513242255.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:15.611Z,1513242255.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:15.644Z,1513242255.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:16.014Z,1513242256.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:16.044Z,1513242256.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:16.409Z,1513242256.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:16.495Z,1513242256.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:16.802Z,1513242256.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:16.817Z,1513242256.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:17.202Z,1513242257.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:17.218Z,1513242257.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:17.602Z,1513242257.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:17.659Z,1513242257.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:18.001Z,1513242258.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:18.063Z,1513242258.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:18.404Z,1513242258.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:18.419Z,1513242258.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:18.810Z,1513242258.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:18.826Z,1513242258.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:19.205Z,1513242259.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:19.262Z,1513242259.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:19.615Z,1513242259.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:19.635Z,1513242259.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:19.993Z,1513242259.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:20.062Z,1513242260.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:20.392Z,1513242260.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:20.419Z,1513242260.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:20.908Z,1513242260.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:20.939Z,1513242260.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:21.198Z,1513242261.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:21.220Z,1513242261.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:21.607Z,1513242261.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:21.622Z,1513242261.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:22.007Z,1513242262.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:22.021Z,1513242262.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:22.406Z,1513242262.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:22.427Z,1513242262.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:22.851Z,1513242262.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:22.886Z,1513242262.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:23.191Z,1513242263.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:23.217Z,1513242263.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:23.588Z,1513242263.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:23.623Z,1513242263.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:24.014Z,1513242264.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:24.028Z,1513242264.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:24.392Z,1513242264.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:24.468Z,1513242264.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:24.802Z,1513242264.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:24.818Z,1513242264.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:25.205Z,1513242265.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:25.220Z,1513242265.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:25.609Z,1513242265.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:25.632Z,1513242265.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:25.991Z,1513242265.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:26.027Z,1513242266.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:26.404Z,1513242266.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:26.498Z,1513242266.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:26.790Z,1513242266.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:26.824Z,1513242266.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:27.214Z,1513242267.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:27.246Z,1513242267.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:27.601Z,1513242267.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:27.623Z,1513242267.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:28.018Z,1513242268.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:28.034Z,1513242268.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:28.401Z,1513242268.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:28.511Z,1513242268.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:28.805Z,1513242268.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:28.820Z,1513242268.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:29.204Z,1513242269.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:29.218Z,1513242269.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:29.607Z,1513242269.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:29.623Z,1513242269.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:33.263Z,1513242273.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:33.278Z,1513242273.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:33.371Z,1513242273.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:33.411Z,1513242273.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:33.767Z,1513242273.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:33.782Z,1513242273.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:34.178Z,1513242274.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:34.209Z,1513242274.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:34.577Z,1513242274.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:34.611Z,1513242274.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:34.975Z,1513242274.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:35.008Z,1513242275.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:35.363Z,1513242275.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:35.390Z,1513242275.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:35.764Z,1513242275.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:35.785Z,1513242275.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:36.169Z,1513242276.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:36.184Z,1513242276.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:36.575Z,1513242276.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:36.589Z,1513242276.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:36.973Z,1513242276.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:36.988Z,1513242276.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:37.372Z,1513242277.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:37.391Z,1513242277.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:37.770Z,1513242277.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:37.785Z,1513242277.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:38.169Z,1513242278.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:38.185Z,1513242278.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:38.564Z,1513242278.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:38.583Z,1513242278.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:38.964Z,1513242278.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:39.038Z,1513242279.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:39.377Z,1513242279.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:39.442Z,1513242279.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:39.777Z,1513242279.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:39.792Z,1513242279.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:40.179Z,1513242280.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:40.224Z,1513242280.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:40.578Z,1513242280.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:40.592Z,1513242280.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:40.956Z,1513242280.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:41.020Z,1513242281.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:41.382Z,1513242281.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:41.403Z,1513242281.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:41.767Z,1513242281.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:41.787Z,1513242281.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:42.170Z,1513242282.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:42.192Z,1513242282.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:42.556Z,1513242282.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:42.581Z,1513242282.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:42.956Z,1513242282.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:42.983Z,1513242282.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:43.395Z,1513242283.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:43.415Z,1513242283.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:43.784Z,1513242283.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:43.798Z,1513242283.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:44.178Z,1513242284.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:44.194Z,1513242284.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:44.580Z,1513242284.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:44.603Z,1513242284.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:44.957Z,1513242284.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:44.994Z,1513242284.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:45.367Z,1513242285.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:45.404Z,1513242285.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:45.784Z,1513242285.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:45.799Z,1513242285.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:46.184Z,1513242286.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:46.227Z,1513242286.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:46.594Z,1513242286.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:46.614Z,1513242286.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:46.959Z,1513242286.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:46.991Z,1513242286.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:47.370Z,1513242287.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:47.397Z,1513242287.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:47.713Z,1513242287.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:47.770Z,1513242287.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:47.791Z,1513242287.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:48.174Z,1513242288.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:48.208Z,1513242288.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:48.509Z,1513242288.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:48.563Z,1513242288.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:48.602Z,1513242288.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:48.960Z,1513242288.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:48.988Z,1513242288.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:49.383Z,1513242289.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:49.435Z,1513242289.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:49.770Z,1513242289.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:49.791Z,1513242289.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:50.170Z,1513242290.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:50.185Z,1513242290.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:50.564Z,1513242290.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:50.579Z,1513242290.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:50.965Z,1513242290.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:50.980Z,1513242290.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:51.367Z,1513242291.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:51.382Z,1513242291.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:51.774Z,1513242291.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:51.788Z,1513242291.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:52.174Z,1513242292.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:52.190Z,1513242292.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:52.588Z,1513242292.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:52.619Z,1513242292.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:52.962Z,1513242292.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:52.989Z,1513242292.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:53.355Z,1513242293.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:53.389Z,1513242293.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:53.760Z,1513242293.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:53.785Z,1513242293.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:54.155Z,1513242294.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:54.190Z,1513242294.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:54.578Z,1513242294.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:54.593Z,1513242294.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:54.987Z,1513242294.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:55.007Z,1513242295.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:55.379Z,1513242295.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:55.393Z,1513242295.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:55.759Z,1513242295.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:55.843Z,1513242295.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:56.155Z,1513242296.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:56.186Z,1513242296.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:56.556Z,1513242296.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:56.590Z,1513242296.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:56.955Z,1513242296.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:56.991Z,1513242296.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:57.387Z,1513242297.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:57.407Z,1513242297.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:57.782Z,1513242297.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:57.797Z,1513242297.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:58.185Z,1513242298.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:58.199Z,1513242298.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:58.564Z,1513242298.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:58.590Z,1513242298.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:58.972Z,1513242298.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:58.996Z,1513242298.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:59.373Z,1513242299.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:59.407Z,1513242299.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:04:59.777Z,1513242299.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:04:59.858Z,1513242299.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:00.173Z,1513242300.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:00.207Z,1513242300.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:00.571Z,1513242300.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:00.624Z,1513242300.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:00.958Z,1513242300.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:00.981Z,1513242300.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:01.370Z,1513242301.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:01.384Z,1513242301.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:01.770Z,1513242301.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:01.811Z,1513242301.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:02.188Z,1513242302.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:02.215Z,1513242302.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:02.555Z,1513242302.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:02.616Z,1513242302.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:02.973Z,1513242302.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:02.987Z,1513242302.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:03.355Z,1513242303.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:03.386Z,1513242303.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:03.778Z,1513242303.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:03.793Z,1513242303.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:04.179Z,1513242304.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:04.199Z,1513242304.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:04.566Z,1513242304.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:04.591Z,1513242304.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:04.971Z,1513242304.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:04.986Z,1513242304.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:05.355Z,1513242305.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:05.431Z,1513242305.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:05.765Z,1513242305.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:05.787Z,1513242305.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:06.165Z,1513242306.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:06.179Z,1513242306.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:06.574Z,1513242306.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:06.589Z,1513242306.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:06.974Z,1513242306.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:06.989Z,1513242306.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:07.370Z,1513242307.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:07.389Z,1513242307.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:07.770Z,1513242307.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:07.784Z,1513242307.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:08.168Z,1513242308.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:08.183Z,1513242308.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:08.595Z,1513242308.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:08.627Z,1513242308.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:08.960Z,1513242308.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:08.991Z,1513242308.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:09.378Z,1513242309.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:09.399Z,1513242309.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:09.776Z,1513242309.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:09.791Z,1513242309.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:10.178Z,1513242310.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:10.192Z,1513242310.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:10.564Z,1513242310.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:10.584Z,1513242310.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:10.955Z,1513242310.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:11.003Z,1513242311.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:11.380Z,1513242311.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:11.395Z,1513242311.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:11.805Z,1513242311.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:11.848Z,1513242311.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:12.166Z,1513242312.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:12.200Z,1513242312.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:12.581Z,1513242312.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:12.596Z,1513242312.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:12.956Z,1513242312.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:12.994Z,1513242312.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:13.382Z,1513242313.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:13.397Z,1513242313.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:13.782Z,1513242313.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:13.797Z,1513242313.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:14.166Z,1513242314.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:14.188Z,1513242314.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:14.582Z,1513242314.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:14.610Z,1513242314.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:15.002Z,1513242315.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:15.025Z,1513242315.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:15.378Z,1513242315.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:15.413Z,1513242315.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:15.775Z,1513242315.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:15.789Z,1513242315.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:16.170Z,1513242316.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:16.234Z,1513242316.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:16.571Z,1513242316.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:16.586Z,1513242316.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:16.964Z,1513242316.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:16.987Z,1513242316.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:17.374Z,1513242317.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:17.389Z,1513242317.389 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:17.389Z,1513242317.389 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171
2017-12-14T09:05:17.389Z,1513242317.389 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:05:17.391Z,1513242317.391 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:17.391Z,1513242317.391 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 171
2017-12-14T09:05:17.391Z,1513242317.391 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:05:17.393Z,1513242317.393 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:17.393Z,1513242317.393 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171
2017-12-14T09:05:17.393Z,1513242317.393 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:05:17.422Z,1513242317.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:05:17.422Z,1513242317.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:05:17.423Z,1513242317.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:05:17.772Z,1513242317.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:17.809Z,1513242317.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:05:17.809Z,1513242317.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171
2017-12-14T09:05:17.810Z,1513242317.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:05:17.810Z,1513242317.810 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 171
2017-12-14T09:05:17.810Z,1513242317.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:05:17.810Z,1513242317.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171
2017-12-14T09:05:18.189Z,1513242318.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:18.219Z,1513242318.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:05:18.219Z,1513242318.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:05:18.220Z,1513242318.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:05:18.220Z,1513242318.220 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:05:18.221Z,1513242318.221 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:05:18.221Z,1513242318.221 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:05:18.237Z,1513242318.237 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:05:18.249Z,1513242318.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:05:18.249Z,1513242318.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:05:18.555Z,1513242318.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:18.595Z,1513242318.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:18.976Z,1513242318.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:19.008Z,1513242319.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:19.363Z,1513242319.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:19.394Z,1513242319.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:19.774Z,1513242319.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:19.801Z,1513242319.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:20.174Z,1513242320.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:20.205Z,1513242320.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:20.578Z,1513242320.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:20.601Z,1513242320.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:20.966Z,1513242320.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:20.981Z,1513242320.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:21.366Z,1513242321.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:21.423Z,1513242321.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:21.777Z,1513242321.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:21.832Z,1513242321.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:22.164Z,1513242322.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:22.183Z,1513242322.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:22.566Z,1513242322.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:22.583Z,1513242322.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:22.978Z,1513242322.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:23.031Z,1513242323.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:23.378Z,1513242323.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:23.414Z,1513242323.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:23.767Z,1513242323.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:23.820Z,1513242323.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:24.164Z,1513242324.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:24.178Z,1513242324.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:24.581Z,1513242324.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:24.616Z,1513242324.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:24.963Z,1513242324.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:24.979Z,1513242324.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:25.370Z,1513242325.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:25.384Z,1513242325.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:25.769Z,1513242325.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:25.784Z,1513242325.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:26.170Z,1513242326.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:26.185Z,1513242326.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:26.564Z,1513242326.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:26.583Z,1513242326.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:26.968Z,1513242326.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:26.984Z,1513242326.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:27.363Z,1513242327.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:27.383Z,1513242327.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:27.795Z,1513242327.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:27.825Z,1513242327.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:28.170Z,1513242328.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:28.184Z,1513242328.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:28.572Z,1513242328.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:28.588Z,1513242328.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:28.959Z,1513242328.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:28.991Z,1513242328.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:28.998Z,1513242328.998 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:05:28.999Z,1513242328.999 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:05:28.999Z,1513242328.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:05:28.999Z,1513242328.999 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:05:29.368Z,1513242329.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:29.383Z,1513242329.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:29.386Z,1513242329.386 [Default:CheckIn:D] Stopped
2017-12-14T09:05:29.386Z,1513242329.386 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:05:29.763Z,1513242329.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:29.782Z,1513242329.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:29.786Z,1513242329.786 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 512.233268 min 
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn:E] Stopped
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn] Stopped
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn](INFO): Running loop #50
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn] Running Loop=50
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:05:29.787Z,1513242329.787 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:05:33.309Z,1513242333.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:33.348Z,1513242333.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:33.461Z,1513242333.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:33.495Z,1513242333.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:33.833Z,1513242333.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:33.848Z,1513242333.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:34.260Z,1513242334.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:34.284Z,1513242334.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:34.630Z,1513242334.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:34.644Z,1513242334.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:35.024Z,1513242335.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:35.039Z,1513242335.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:35.424Z,1513242335.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:35.439Z,1513242335.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:35.828Z,1513242335.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:35.843Z,1513242335.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:36.227Z,1513242336.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:36.241Z,1513242336.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:36.630Z,1513242336.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:36.644Z,1513242336.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:37.034Z,1513242337.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:37.048Z,1513242337.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:37.432Z,1513242337.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:37.475Z,1513242337.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:37.824Z,1513242337.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:37.839Z,1513242337.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:38.227Z,1513242338.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:38.242Z,1513242338.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:38.623Z,1513242338.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:38.643Z,1513242338.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:39.051Z,1513242339.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:39.079Z,1513242339.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:39.434Z,1513242339.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:39.448Z,1513242339.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:39.833Z,1513242339.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:39.847Z,1513242339.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:40.234Z,1513242340.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:40.249Z,1513242340.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:40.671Z,1513242340.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:40.706Z,1513242340.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:41.021Z,1513242341.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:41.043Z,1513242341.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:41.425Z,1513242341.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:41.439Z,1513242341.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:41.827Z,1513242341.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:41.842Z,1513242341.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:42.218Z,1513242342.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:42.249Z,1513242342.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:42.638Z,1513242342.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:42.659Z,1513242342.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:43.036Z,1513242343.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:43.071Z,1513242343.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:43.437Z,1513242343.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:43.452Z,1513242343.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:43.815Z,1513242343.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:43.906Z,1513242343.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:44.231Z,1513242344.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:44.263Z,1513242344.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:44.629Z,1513242344.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:44.653Z,1513242344.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:45.015Z,1513242345.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:45.078Z,1513242345.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:45.430Z,1513242345.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:45.444Z,1513242345.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:45.829Z,1513242345.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:45.873Z,1513242345.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:46.230Z,1513242346.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:46.251Z,1513242346.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:46.625Z,1513242346.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:46.679Z,1513242346.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:47.030Z,1513242347.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:47.078Z,1513242347.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:47.423Z,1513242347.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:47.443Z,1513242347.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:47.829Z,1513242347.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:47.844Z,1513242347.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:48.223Z,1513242348.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:48.246Z,1513242348.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:48.634Z,1513242348.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:48.648Z,1513242348.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:49.032Z,1513242349.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:49.047Z,1513242349.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:49.432Z,1513242349.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:49.448Z,1513242349.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:49.815Z,1513242349.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:49.848Z,1513242349.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:50.234Z,1513242350.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:50.261Z,1513242350.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:50.616Z,1513242350.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:50.643Z,1513242350.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:51.015Z,1513242351.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:51.042Z,1513242351.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:51.439Z,1513242351.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:51.459Z,1513242351.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:51.838Z,1513242351.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:51.859Z,1513242351.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:52.231Z,1513242352.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:52.245Z,1513242352.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:52.619Z,1513242352.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:52.646Z,1513242352.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:53.016Z,1513242353.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:53.043Z,1513242353.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:53.420Z,1513242353.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:53.447Z,1513242353.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:53.820Z,1513242353.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:53.852Z,1513242353.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:54.220Z,1513242354.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:54.235Z,1513242354.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:54.629Z,1513242354.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:54.658Z,1513242354.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:55.033Z,1513242355.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:55.106Z,1513242355.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:55.434Z,1513242355.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:55.460Z,1513242355.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:55.821Z,1513242355.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:55.836Z,1513242355.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:56.224Z,1513242356.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:56.240Z,1513242356.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:56.677Z,1513242356.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:56.729Z,1513242356.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:57.025Z,1513242357.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:57.040Z,1513242357.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:57.434Z,1513242357.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:57.465Z,1513242357.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:57.838Z,1513242357.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:57.869Z,1513242357.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:58.230Z,1513242358.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:58.245Z,1513242358.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:58.626Z,1513242358.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:58.642Z,1513242358.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:59.023Z,1513242359.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:59.038Z,1513242359.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:59.427Z,1513242359.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:59.442Z,1513242359.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:05:59.829Z,1513242359.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:05:59.844Z,1513242359.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:00.225Z,1513242360.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:00.240Z,1513242360.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:00.634Z,1513242360.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:00.648Z,1513242360.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:01.032Z,1513242361.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:01.048Z,1513242361.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:01.432Z,1513242361.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:01.447Z,1513242361.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:01.826Z,1513242361.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:01.840Z,1513242361.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:02.216Z,1513242362.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:02.255Z,1513242362.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:02.633Z,1513242362.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:02.658Z,1513242362.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:03.015Z,1513242363.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:03.108Z,1513242363.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:03.426Z,1513242363.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:03.457Z,1513242363.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:03.838Z,1513242363.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:03.863Z,1513242363.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:04.238Z,1513242364.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:04.264Z,1513242364.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:04.632Z,1513242364.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:04.666Z,1513242364.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:05.021Z,1513242365.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:05.036Z,1513242365.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:05.424Z,1513242365.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:05.439Z,1513242365.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:05.824Z,1513242365.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:05.839Z,1513242365.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:06.241Z,1513242366.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:06.322Z,1513242366.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:06.637Z,1513242366.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:06.652Z,1513242366.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:07.043Z,1513242367.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:07.102Z,1513242367.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:07.425Z,1513242367.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:07.456Z,1513242367.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:07.815Z,1513242367.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:07.859Z,1513242367.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:08.215Z,1513242368.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:08.251Z,1513242368.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:08.622Z,1513242368.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:08.680Z,1513242368.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:09.015Z,1513242369.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:09.035Z,1513242369.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:09.421Z,1513242369.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:09.436Z,1513242369.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:09.833Z,1513242369.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:09.860Z,1513242369.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:10.232Z,1513242370.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:10.259Z,1513242370.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:10.619Z,1513242370.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:10.639Z,1513242370.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:11.027Z,1513242371.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:11.063Z,1513242371.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:11.424Z,1513242371.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:11.438Z,1513242371.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:11.824Z,1513242371.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:11.847Z,1513242371.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:12.224Z,1513242372.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:12.243Z,1513242372.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:12.668Z,1513242372.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:12.683Z,1513242372.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:13.034Z,1513242373.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:13.057Z,1513242373.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:13.434Z,1513242373.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:13.460Z,1513242373.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:13.820Z,1513242373.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:13.839Z,1513242373.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:14.212Z,1513242374.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:14.236Z,1513242374.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:14.624Z,1513242374.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:14.643Z,1513242374.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:15.024Z,1513242375.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:15.043Z,1513242375.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:15.425Z,1513242375.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:15.447Z,1513242375.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:15.837Z,1513242375.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:15.852Z,1513242375.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:16.239Z,1513242376.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:16.253Z,1513242376.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:16.615Z,1513242376.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:16.640Z,1513242376.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:17.015Z,1513242377.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:17.078Z,1513242377.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:17.415Z,1513242377.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:17.441Z,1513242377.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:17.829Z,1513242377.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:17.844Z,1513242377.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:18.215Z,1513242378.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:18.242Z,1513242378.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:18.639Z,1513242378.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:18.654Z,1513242378.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:19.059Z,1513242379.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:19.092Z,1513242379.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:19.433Z,1513242379.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:19.448Z,1513242379.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:19.815Z,1513242379.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:19.847Z,1513242379.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:20.217Z,1513242380.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:20.252Z,1513242380.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:20.656Z,1513242380.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:20.671Z,1513242380.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:21.018Z,1513242381.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:21.033Z,1513242381.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:21.432Z,1513242381.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:21.468Z,1513242381.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:21.843Z,1513242381.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:21.872Z,1513242381.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:22.250Z,1513242382.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:22.315Z,1513242382.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:22.629Z,1513242382.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:22.683Z,1513242382.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:23.022Z,1513242383.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:23.061Z,1513242383.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:23.426Z,1513242383.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:23.455Z,1513242383.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:23.835Z,1513242383.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:23.875Z,1513242383.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:24.249Z,1513242384.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:24.297Z,1513242384.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:24.646Z,1513242384.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:24.687Z,1513242384.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:25.050Z,1513242385.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:25.094Z,1513242385.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:25.441Z,1513242385.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:25.460Z,1513242385.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:25.850Z,1513242385.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:25.873Z,1513242385.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:26.243Z,1513242386.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:26.262Z,1513242386.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:26.630Z,1513242386.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:26.664Z,1513242386.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:27.052Z,1513242387.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:27.067Z,1513242387.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:27.446Z,1513242387.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:27.475Z,1513242387.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:27.845Z,1513242387.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:27.895Z,1513242387.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:28.233Z,1513242388.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:28.255Z,1513242388.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:28.628Z,1513242388.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:28.675Z,1513242388.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:29.026Z,1513242389.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:29.166Z,1513242389.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:29.458Z,1513242389.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:29.472Z,1513242389.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:29.818Z,1513242389.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:29.845Z,1513242389.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:35.562Z,1513242395.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:35.657Z,1513242395.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:35.807Z,1513242395.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:35.851Z,1513242395.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:36.188Z,1513242396.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:36.255Z,1513242396.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:36.584Z,1513242396.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:36.626Z,1513242396.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:37.014Z,1513242397.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:37.069Z,1513242397.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:37.365Z,1513242397.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:37.388Z,1513242397.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:37.773Z,1513242397.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:37.838Z,1513242397.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:38.162Z,1513242398.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:38.210Z,1513242398.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:38.571Z,1513242398.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:38.622Z,1513242398.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:38.980Z,1513242398.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:39.023Z,1513242399.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:39.380Z,1513242399.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:39.421Z,1513242399.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:39.778Z,1513242399.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:39.820Z,1513242399.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:40.166Z,1513242400.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:40.191Z,1513242400.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:40.571Z,1513242400.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:40.621Z,1513242400.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:40.974Z,1513242400.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:41.026Z,1513242401.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:41.379Z,1513242401.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:41.422Z,1513242401.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:41.779Z,1513242401.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:41.817Z,1513242401.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:42.179Z,1513242402.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:42.220Z,1513242402.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:42.571Z,1513242402.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:42.615Z,1513242402.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:42.981Z,1513242402.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:43.020Z,1513242403.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:43.391Z,1513242403.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:43.443Z,1513242403.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:43.786Z,1513242403.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:43.829Z,1513242403.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:44.180Z,1513242404.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:44.204Z,1513242404.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:44.561Z,1513242404.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:44.626Z,1513242404.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:44.961Z,1513242404.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:44.992Z,1513242404.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:45.372Z,1513242405.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:45.403Z,1513242405.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:45.775Z,1513242405.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:45.843Z,1513242405.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:46.176Z,1513242406.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:46.254Z,1513242406.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:46.562Z,1513242406.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:46.601Z,1513242406.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:46.969Z,1513242406.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:47.011Z,1513242407.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:47.381Z,1513242407.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:47.414Z,1513242407.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:47.777Z,1513242407.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:47.792Z,1513242407.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:48.173Z,1513242408.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:48.187Z,1513242408.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:48.570Z,1513242408.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:48.584Z,1513242408.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:48.966Z,1513242408.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:48.988Z,1513242408.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:49.381Z,1513242409.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:49.396Z,1513242409.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:49.781Z,1513242409.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:49.795Z,1513242409.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:50.181Z,1513242410.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:50.196Z,1513242410.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:50.569Z,1513242410.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:50.591Z,1513242410.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:50.968Z,1513242410.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:50.984Z,1513242410.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:51.374Z,1513242411.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:51.388Z,1513242411.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:51.777Z,1513242411.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:51.799Z,1513242411.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:52.174Z,1513242412.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:52.272Z,1513242412.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:52.571Z,1513242412.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:52.590Z,1513242412.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:52.968Z,1513242412.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:52.990Z,1513242412.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:53.374Z,1513242413.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:53.389Z,1513242413.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:53.778Z,1513242413.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:53.793Z,1513242413.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:54.172Z,1513242414.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:54.191Z,1513242414.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:54.573Z,1513242414.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:54.588Z,1513242414.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:54.975Z,1513242414.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:55.027Z,1513242415.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:55.369Z,1513242415.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:55.391Z,1513242415.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:55.821Z,1513242415.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:55.845Z,1513242415.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:56.176Z,1513242416.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:56.200Z,1513242416.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:56.577Z,1513242416.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:56.659Z,1513242416.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:56.962Z,1513242416.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:56.993Z,1513242416.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:57.359Z,1513242417.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:57.426Z,1513242417.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:57.760Z,1513242417.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:57.786Z,1513242417.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:58.199Z,1513242418.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:58.256Z,1513242418.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:58.542Z,1513242418.542 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T09:06:58.543Z,1513242418.543 [NAL9602] Data Fault, FailCount= 2
2017-12-14T09:06:58.543Z,1513242418.543 [NAL9602](ERROR): Data Fault
2017-12-14T09:06:58.560Z,1513242418.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:58.595Z,1513242418.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:58.625Z,1513242418.625 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T09:06:58.942Z,1513242418.942 [NAL9602](INFO): Powering down
2017-12-14T09:06:58.960Z,1513242418.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:58.999Z,1513242418.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:59.364Z,1513242419.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:59.399Z,1513242419.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:59.756Z,1513242419.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:06:59.772Z,1513242419.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:06:59.801Z,1513242419.801 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T09:06:59.801Z,1513242419.801 [NAL9602] No Fault, FailCount= 2
2017-12-14T09:07:00.163Z,1513242420.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:00.178Z,1513242420.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:00.575Z,1513242420.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:00.606Z,1513242420.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:00.971Z,1513242420.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:01.004Z,1513242421.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:01.404Z,1513242421.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:01.463Z,1513242421.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:01.915Z,1513242421.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:01.935Z,1513242421.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:02.160Z,1513242422.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:02.195Z,1513242422.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:02.565Z,1513242422.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:02.579Z,1513242422.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:02.962Z,1513242422.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:02.981Z,1513242422.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:03.371Z,1513242423.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:03.386Z,1513242423.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:03.771Z,1513242423.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:03.786Z,1513242423.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:04.171Z,1513242424.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:04.190Z,1513242424.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:04.615Z,1513242424.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:04.643Z,1513242424.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:04.959Z,1513242424.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:04.992Z,1513242424.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:05.359Z,1513242425.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:05.395Z,1513242425.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:05.767Z,1513242425.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:05.790Z,1513242425.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:06.167Z,1513242426.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:06.181Z,1513242426.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:06.569Z,1513242426.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:06.627Z,1513242426.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:06.967Z,1513242426.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:06.983Z,1513242426.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:07.366Z,1513242427.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:07.382Z,1513242427.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:07.781Z,1513242427.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:07.823Z,1513242427.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:08.179Z,1513242428.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:08.207Z,1513242428.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:08.567Z,1513242428.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:08.585Z,1513242428.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:08.967Z,1513242428.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:09.012Z,1513242429.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:09.368Z,1513242429.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:09.383Z,1513242429.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:09.766Z,1513242429.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:09.781Z,1513242429.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:10.169Z,1513242430.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:10.184Z,1513242430.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:10.568Z,1513242430.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:10.583Z,1513242430.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:11.013Z,1513242431.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:11.073Z,1513242431.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:11.368Z,1513242431.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:11.383Z,1513242431.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:11.768Z,1513242431.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:11.788Z,1513242431.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:12.167Z,1513242432.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:12.181Z,1513242432.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:12.563Z,1513242432.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:12.582Z,1513242432.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:12.960Z,1513242432.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:12.987Z,1513242432.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:13.359Z,1513242433.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:13.395Z,1513242433.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:13.760Z,1513242433.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:13.796Z,1513242433.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:14.193Z,1513242434.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:14.218Z,1513242434.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:14.558Z,1513242434.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:14.600Z,1513242434.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:14.963Z,1513242434.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:15.000Z,1513242435.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:15.372Z,1513242435.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:15.400Z,1513242435.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:15.758Z,1513242435.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:15.774Z,1513242435.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:16.163Z,1513242436.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:16.178Z,1513242436.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:16.563Z,1513242436.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:16.583Z,1513242436.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:16.966Z,1513242436.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:16.981Z,1513242436.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:17.368Z,1513242437.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:17.383Z,1513242437.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:17.767Z,1513242437.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:17.787Z,1513242437.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:18.166Z,1513242438.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:18.256Z,1513242438.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:18.565Z,1513242438.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:18.579Z,1513242438.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:18.967Z,1513242438.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:18.982Z,1513242438.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:19.371Z,1513242439.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:19.412Z,1513242439.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:19.767Z,1513242439.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:19.787Z,1513242439.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:20.166Z,1513242440.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:20.221Z,1513242440.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:20.609Z,1513242440.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:20.668Z,1513242440.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:20.967Z,1513242440.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:20.987Z,1513242440.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:21.369Z,1513242441.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:21.391Z,1513242441.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:21.771Z,1513242441.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:21.785Z,1513242441.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:22.165Z,1513242442.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:22.194Z,1513242442.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:22.570Z,1513242442.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:22.600Z,1513242442.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:22.966Z,1513242442.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:22.980Z,1513242442.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:23.363Z,1513242443.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:23.387Z,1513242443.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:23.768Z,1513242443.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:23.783Z,1513242443.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:24.168Z,1513242444.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:24.182Z,1513242444.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:24.570Z,1513242444.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:24.590Z,1513242444.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:24.960Z,1513242444.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:24.992Z,1513242444.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:25.358Z,1513242445.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:25.383Z,1513242445.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:25.758Z,1513242445.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:25.801Z,1513242445.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:26.158Z,1513242446.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:26.185Z,1513242446.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:26.559Z,1513242446.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:26.573Z,1513242446.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:26.988Z,1513242446.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:27.042Z,1513242447.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:27.355Z,1513242447.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:27.400Z,1513242447.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:27.766Z,1513242447.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:27.780Z,1513242447.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:28.162Z,1513242448.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:28.184Z,1513242448.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:28.558Z,1513242448.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:28.607Z,1513242448.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:28.958Z,1513242448.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:28.996Z,1513242448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:29.346Z,1513242449.346 [NAL9602](INFO): Powering up NAL9602
2017-12-14T09:07:29.365Z,1513242449.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:29.400Z,1513242449.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:29.761Z,1513242449.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:29.793Z,1513242449.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:30.178Z,1513242450.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:30.236Z,1513242450.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:33.717Z,1513242453.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:33.748Z,1513242453.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:33.836Z,1513242453.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:33.871Z,1513242453.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:34.205Z,1513242454.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:34.219Z,1513242454.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:34.606Z,1513242454.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:34.627Z,1513242454.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:35.004Z,1513242455.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:35.019Z,1513242455.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:35.404Z,1513242455.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:35.419Z,1513242455.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:35.803Z,1513242455.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:35.819Z,1513242455.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:36.203Z,1513242456.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:36.218Z,1513242456.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:36.620Z,1513242456.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:36.656Z,1513242456.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:37.004Z,1513242457.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:37.019Z,1513242457.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:37.409Z,1513242457.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:37.424Z,1513242457.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:37.809Z,1513242457.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:37.823Z,1513242457.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:38.204Z,1513242458.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:38.272Z,1513242458.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:38.604Z,1513242458.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:38.619Z,1513242458.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:39.003Z,1513242459.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:39.023Z,1513242459.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:39.408Z,1513242459.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:39.423Z,1513242459.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:39.812Z,1513242459.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:39.857Z,1513242459.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:40.178Z,1513242460.178 [NAL9602](INFO): NAL9602 initialized
2017-12-14T09:07:40.206Z,1513242460.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:40.227Z,1513242460.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:40.603Z,1513242460.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:40.704Z,1513242460.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:41.014Z,1513242461.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:41.034Z,1513242461.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:41.420Z,1513242461.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:41.444Z,1513242461.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:41.815Z,1513242461.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:41.874Z,1513242461.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:42.194Z,1513242462.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:42.224Z,1513242462.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:42.596Z,1513242462.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:42.661Z,1513242462.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:43.011Z,1513242463.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:43.038Z,1513242463.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:43.395Z,1513242463.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:43.421Z,1513242463.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:43.826Z,1513242463.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:43.974Z,1513242463.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:44.222Z,1513242464.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:44.269Z,1513242464.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:44.619Z,1513242464.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:44.634Z,1513242464.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:44.996Z,1513242464.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:45.027Z,1513242465.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:45.395Z,1513242465.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:45.428Z,1513242465.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:45.796Z,1513242465.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:45.823Z,1513242465.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:46.203Z,1513242466.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:46.234Z,1513242466.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:46.606Z,1513242466.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:46.632Z,1513242466.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:47.019Z,1513242467.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:47.039Z,1513242467.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:47.418Z,1513242467.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:47.436Z,1513242467.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:47.797Z,1513242467.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:47.824Z,1513242467.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:48.199Z,1513242468.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:48.231Z,1513242468.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:48.614Z,1513242468.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:48.654Z,1513242468.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:49.013Z,1513242469.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:49.040Z,1513242469.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:49.433Z,1513242469.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:49.479Z,1513242469.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:49.802Z,1513242469.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:49.817Z,1513242469.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:50.205Z,1513242470.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:50.221Z,1513242470.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:50.619Z,1513242470.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:50.643Z,1513242470.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:51.017Z,1513242471.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:51.071Z,1513242471.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:51.417Z,1513242471.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:51.447Z,1513242471.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:51.803Z,1513242471.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:51.827Z,1513242471.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:52.207Z,1513242472.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:52.235Z,1513242472.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:52.655Z,1513242472.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:52.679Z,1513242472.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:53.018Z,1513242473.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:53.034Z,1513242473.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:53.414Z,1513242473.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:53.429Z,1513242473.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:53.800Z,1513242473.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:53.827Z,1513242473.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:54.196Z,1513242474.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:54.225Z,1513242474.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:54.617Z,1513242474.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:54.635Z,1513242474.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:55.021Z,1513242475.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:55.036Z,1513242475.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:55.419Z,1513242475.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:55.436Z,1513242475.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:55.796Z,1513242475.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:55.828Z,1513242475.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:56.195Z,1513242476.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:56.227Z,1513242476.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:56.621Z,1513242476.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:56.636Z,1513242476.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:57.020Z,1513242477.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:57.036Z,1513242477.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:57.418Z,1513242477.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:57.433Z,1513242477.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:57.796Z,1513242477.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:57.828Z,1513242477.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:58.195Z,1513242478.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:58.234Z,1513242478.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:58.605Z,1513242478.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:58.639Z,1513242478.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:59.044Z,1513242479.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:59.083Z,1513242479.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:59.423Z,1513242479.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:59.440Z,1513242479.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:07:59.800Z,1513242479.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:07:59.828Z,1513242479.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:00.200Z,1513242480.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:00.215Z,1513242480.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:00.628Z,1513242480.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:00.644Z,1513242480.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:01.013Z,1513242481.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:01.039Z,1513242481.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:01.413Z,1513242481.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:01.442Z,1513242481.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:01.802Z,1513242481.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:01.843Z,1513242481.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:02.244Z,1513242482.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:02.279Z,1513242482.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:02.617Z,1513242482.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:02.632Z,1513242482.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:03.017Z,1513242483.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:03.082Z,1513242483.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:03.418Z,1513242483.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:03.480Z,1513242483.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:03.812Z,1513242483.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:03.827Z,1513242483.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:04.195Z,1513242484.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:04.223Z,1513242484.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:04.612Z,1513242484.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:04.662Z,1513242484.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:05.019Z,1513242485.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:05.034Z,1513242485.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:05.446Z,1513242485.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:05.496Z,1513242485.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:05.796Z,1513242485.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:05.838Z,1513242485.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:06.200Z,1513242486.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:06.231Z,1513242486.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:06.610Z,1513242486.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:06.636Z,1513242486.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:07.009Z,1513242487.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:07.040Z,1513242487.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:07.405Z,1513242487.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:07.428Z,1513242487.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:07.804Z,1513242487.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:07.818Z,1513242487.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:08.202Z,1513242488.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:08.217Z,1513242488.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:08.634Z,1513242488.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:08.658Z,1513242488.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:09.010Z,1513242489.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:09.025Z,1513242489.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:09.405Z,1513242489.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:09.427Z,1513242489.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:09.803Z,1513242489.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:09.818Z,1513242489.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:10.205Z,1513242490.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:10.227Z,1513242490.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:10.605Z,1513242490.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:10.620Z,1513242490.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:11.021Z,1513242491.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:11.052Z,1513242491.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:11.410Z,1513242491.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:11.431Z,1513242491.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:11.806Z,1513242491.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:11.882Z,1513242491.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:12.206Z,1513242492.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:12.221Z,1513242492.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:12.610Z,1513242492.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:12.624Z,1513242492.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:13.013Z,1513242493.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:13.028Z,1513242493.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:13.410Z,1513242493.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:13.425Z,1513242493.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:13.802Z,1513242493.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:13.851Z,1513242493.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:14.203Z,1513242494.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:14.217Z,1513242494.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:14.609Z,1513242494.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:14.624Z,1513242494.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:15.027Z,1513242495.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:15.054Z,1513242495.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:15.414Z,1513242495.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:15.435Z,1513242495.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:15.812Z,1513242495.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:15.827Z,1513242495.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:16.195Z,1513242496.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:16.231Z,1513242496.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:16.614Z,1513242496.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:16.628Z,1513242496.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:17.015Z,1513242497.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:17.035Z,1513242497.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:17.434Z,1513242497.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:17.479Z,1513242497.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:17.798Z,1513242497.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:17.825Z,1513242497.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:18.230Z,1513242498.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:18.273Z,1513242498.273 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:18.273Z,1513242498.273 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172
2017-12-14T09:08:18.274Z,1513242498.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:08:18.275Z,1513242498.275 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:18.275Z,1513242498.275 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 172
2017-12-14T09:08:18.276Z,1513242498.276 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:08:18.282Z,1513242498.282 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:18.282Z,1513242498.282 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172
2017-12-14T09:08:18.282Z,1513242498.282 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:08:18.327Z,1513242498.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:08:18.327Z,1513242498.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:08:18.327Z,1513242498.327 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:08:18.613Z,1513242498.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:18.664Z,1513242498.664 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:08:18.664Z,1513242498.664 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172
2017-12-14T09:08:18.664Z,1513242498.664 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:08:18.664Z,1513242498.664 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 172
2017-12-14T09:08:18.665Z,1513242498.665 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:08:18.665Z,1513242498.665 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172
2017-12-14T09:08:19.009Z,1513242499.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:19.029Z,1513242499.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:08:19.030Z,1513242499.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:08:19.030Z,1513242499.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:08:19.031Z,1513242499.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:08:19.031Z,1513242499.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:08:19.031Z,1513242499.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:08:19.032Z,1513242499.032 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:08:19.032Z,1513242499.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:08:19.032Z,1513242499.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:08:19.414Z,1513242499.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:19.429Z,1513242499.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:19.810Z,1513242499.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:19.824Z,1513242499.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:20.207Z,1513242500.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:20.221Z,1513242500.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:20.615Z,1513242500.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:20.630Z,1513242500.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:21.030Z,1513242501.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:21.060Z,1513242501.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:21.413Z,1513242501.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:21.434Z,1513242501.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:21.803Z,1513242501.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:21.835Z,1513242501.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:22.203Z,1513242502.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:22.239Z,1513242502.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:22.625Z,1513242502.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:22.640Z,1513242502.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:23.014Z,1513242503.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:23.044Z,1513242503.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:23.413Z,1513242503.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:23.436Z,1513242503.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:23.803Z,1513242503.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:23.837Z,1513242503.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:24.203Z,1513242504.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:24.237Z,1513242504.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:24.634Z,1513242504.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:24.660Z,1513242504.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:25.017Z,1513242505.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:25.048Z,1513242505.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:25.419Z,1513242505.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:25.491Z,1513242505.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:25.805Z,1513242505.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:25.878Z,1513242505.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:26.207Z,1513242506.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:26.221Z,1513242506.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:26.611Z,1513242506.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:26.626Z,1513242506.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:27.010Z,1513242507.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:27.062Z,1513242507.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:27.406Z,1513242507.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:27.427Z,1513242507.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:27.798Z,1513242507.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:27.847Z,1513242507.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:28.206Z,1513242508.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:28.220Z,1513242508.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:28.605Z,1513242508.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:28.620Z,1513242508.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:29.013Z,1513242509.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:29.044Z,1513242509.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:29.417Z,1513242509.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:29.451Z,1513242509.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:29.806Z,1513242509.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:29.820Z,1513242509.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:30.206Z,1513242510.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:30.222Z,1513242510.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:33.638Z,1513242513.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:33.655Z,1513242513.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:33.766Z,1513242513.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:33.803Z,1513242513.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:34.125Z,1513242514.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:34.151Z,1513242514.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:34.513Z,1513242514.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:34.527Z,1513242514.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:34.914Z,1513242514.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:34.951Z,1513242514.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:35.308Z,1513242515.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:35.323Z,1513242515.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:35.721Z,1513242515.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:35.736Z,1513242515.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:36.125Z,1513242516.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:36.171Z,1513242516.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:36.516Z,1513242516.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:36.551Z,1513242516.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:36.913Z,1513242516.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:36.935Z,1513242516.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:37.312Z,1513242517.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:37.379Z,1513242517.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:37.710Z,1513242517.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:37.726Z,1513242517.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:38.112Z,1513242518.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:38.131Z,1513242518.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:38.514Z,1513242518.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:38.538Z,1513242518.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:38.922Z,1513242518.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:38.937Z,1513242518.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:39.322Z,1513242519.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:39.336Z,1513242519.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:39.717Z,1513242519.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:39.740Z,1513242519.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:40.111Z,1513242520.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:40.128Z,1513242520.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:40.546Z,1513242520.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:40.598Z,1513242520.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:40.916Z,1513242520.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:40.935Z,1513242520.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:41.315Z,1513242521.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:41.330Z,1513242521.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:41.726Z,1513242521.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:41.740Z,1513242521.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:42.122Z,1513242522.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:42.137Z,1513242522.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:42.523Z,1513242522.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:42.540Z,1513242522.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:42.907Z,1513242522.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:42.926Z,1513242522.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:43.303Z,1513242523.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:43.335Z,1513242523.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:43.723Z,1513242523.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:43.751Z,1513242523.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:44.125Z,1513242524.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:44.140Z,1513242524.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:44.550Z,1513242524.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:44.589Z,1513242524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:44.914Z,1513242524.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:44.952Z,1513242524.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:45.325Z,1513242525.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:45.349Z,1513242525.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:45.714Z,1513242525.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:45.747Z,1513242525.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:46.103Z,1513242526.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:46.140Z,1513242526.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:46.504Z,1513242526.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:46.540Z,1513242526.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:46.904Z,1513242526.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:46.983Z,1513242526.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:47.303Z,1513242527.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:47.339Z,1513242527.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:47.717Z,1513242527.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:47.764Z,1513242527.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:48.121Z,1513242528.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:48.183Z,1513242528.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:48.525Z,1513242528.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:48.556Z,1513242528.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:48.920Z,1513242528.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:48.975Z,1513242528.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:49.313Z,1513242529.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:49.328Z,1513242529.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:49.712Z,1513242529.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:49.763Z,1513242529.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:50.153Z,1513242530.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:50.203Z,1513242530.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:50.513Z,1513242530.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:50.552Z,1513242530.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:50.914Z,1513242530.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:50.929Z,1513242530.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:51.325Z,1513242531.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:51.339Z,1513242531.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:51.713Z,1513242531.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:51.727Z,1513242531.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:52.110Z,1513242532.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:52.126Z,1513242532.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:52.523Z,1513242532.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:52.560Z,1513242532.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:52.914Z,1513242532.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:52.935Z,1513242532.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:53.348Z,1513242533.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:53.381Z,1513242533.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:53.723Z,1513242533.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:53.743Z,1513242533.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:54.122Z,1513242534.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:54.143Z,1513242534.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:54.523Z,1513242534.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:54.539Z,1513242534.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:54.907Z,1513242534.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:54.952Z,1513242534.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:55.300Z,1513242535.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:55.326Z,1513242535.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:55.720Z,1513242535.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:55.736Z,1513242535.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:56.104Z,1513242536.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:56.139Z,1513242536.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:56.547Z,1513242536.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:56.579Z,1513242536.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:56.922Z,1513242536.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:56.936Z,1513242536.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:57.326Z,1513242537.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:57.347Z,1513242537.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:57.713Z,1513242537.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:57.744Z,1513242537.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:58.108Z,1513242538.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:58.174Z,1513242538.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:58.550Z,1513242538.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:58.594Z,1513242538.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:58.908Z,1513242538.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:58.932Z,1513242538.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:59.315Z,1513242539.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:59.335Z,1513242539.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:08:59.722Z,1513242539.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:08:59.736Z,1513242539.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:00.122Z,1513242540.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:00.136Z,1513242540.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:00.522Z,1513242540.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:00.543Z,1513242540.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:00.928Z,1513242540.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:00.943Z,1513242540.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:01.300Z,1513242541.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:01.335Z,1513242541.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:01.716Z,1513242541.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:01.730Z,1513242541.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:02.122Z,1513242542.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:02.136Z,1513242542.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:02.511Z,1513242542.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:02.530Z,1513242542.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:02.971Z,1513242542.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:02.995Z,1513242542.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:03.328Z,1513242543.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:03.347Z,1513242543.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:03.720Z,1513242543.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:03.735Z,1513242543.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:04.103Z,1513242544.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:04.135Z,1513242544.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:04.505Z,1513242544.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:04.538Z,1513242544.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:04.908Z,1513242544.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:04.937Z,1513242544.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:05.304Z,1513242545.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:05.341Z,1513242545.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:05.725Z,1513242545.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:05.754Z,1513242545.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:06.132Z,1513242546.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:06.158Z,1513242546.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:06.547Z,1513242546.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:06.584Z,1513242546.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:06.912Z,1513242546.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:06.944Z,1513242546.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:07.311Z,1513242547.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:07.338Z,1513242547.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:07.704Z,1513242547.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:07.736Z,1513242547.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:08.103Z,1513242548.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:08.141Z,1513242548.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:08.505Z,1513242548.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:08.544Z,1513242548.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:08.926Z,1513242548.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:08.941Z,1513242548.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:09.332Z,1513242549.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:09.355Z,1513242549.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:09.726Z,1513242549.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:09.780Z,1513242549.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:10.112Z,1513242550.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:10.127Z,1513242550.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:10.509Z,1513242550.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:10.553Z,1513242550.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:10.908Z,1513242550.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:10.962Z,1513242550.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:11.313Z,1513242551.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:11.328Z,1513242551.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:11.362Z,1513242551.362 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:09:11.717Z,1513242551.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:11.771Z,1513242551.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:12.126Z,1513242552.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:12.156Z,1513242552.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:12.571Z,1513242552.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:12.631Z,1513242552.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:12.915Z,1513242552.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:12.943Z,1513242552.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:13.303Z,1513242553.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:13.338Z,1513242553.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:13.703Z,1513242553.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:13.738Z,1513242553.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:14.109Z,1513242554.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:14.140Z,1513242554.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:14.503Z,1513242554.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:14.540Z,1513242554.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:14.913Z,1513242554.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:14.944Z,1513242554.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:15.325Z,1513242555.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:15.347Z,1513242555.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:15.727Z,1513242555.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:15.741Z,1513242555.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:16.133Z,1513242556.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:16.187Z,1513242556.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:16.508Z,1513242556.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:16.540Z,1513242556.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:16.904Z,1513242556.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:16.936Z,1513242556.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:17.307Z,1513242557.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:17.343Z,1513242557.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:17.730Z,1513242557.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:17.752Z,1513242557.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:18.126Z,1513242558.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:18.140Z,1513242558.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:18.529Z,1513242558.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:18.567Z,1513242558.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:18.918Z,1513242558.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:18.933Z,1513242558.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:19.312Z,1513242559.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:19.342Z,1513242559.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:19.703Z,1513242559.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:19.736Z,1513242559.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:20.116Z,1513242560.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:20.131Z,1513242560.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:20.523Z,1513242560.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:20.550Z,1513242560.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:20.930Z,1513242560.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:20.982Z,1513242560.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:21.330Z,1513242561.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:21.344Z,1513242561.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:21.729Z,1513242561.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:21.744Z,1513242561.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:22.115Z,1513242562.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:22.131Z,1513242562.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:22.546Z,1513242562.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:22.586Z,1513242562.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:22.920Z,1513242562.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:22.948Z,1513242562.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:23.311Z,1513242563.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:23.355Z,1513242563.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:23.718Z,1513242563.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:23.745Z,1513242563.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:24.127Z,1513242564.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:24.155Z,1513242564.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:24.527Z,1513242564.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:24.559Z,1513242564.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:24.914Z,1513242564.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:24.928Z,1513242564.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:25.303Z,1513242565.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:25.331Z,1513242565.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:25.716Z,1513242565.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:25.759Z,1513242565.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:26.111Z,1513242566.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:26.132Z,1513242566.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:26.557Z,1513242566.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:26.596Z,1513242566.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:26.924Z,1513242566.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:26.940Z,1513242566.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:27.329Z,1513242567.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:27.352Z,1513242567.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:27.726Z,1513242567.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:27.742Z,1513242567.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:28.103Z,1513242568.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:28.130Z,1513242568.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:28.519Z,1513242568.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:28.534Z,1513242568.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:28.964Z,1513242568.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:28.983Z,1513242568.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:29.303Z,1513242569.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:29.338Z,1513242569.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:29.727Z,1513242569.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:29.742Z,1513242569.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:30.130Z,1513242570.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:30.145Z,1513242570.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:30.526Z,1513242570.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:30.547Z,1513242570.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:33.926Z,1513242573.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:34.026Z,1513242574.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:34.134Z,1513242574.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:34.175Z,1513242574.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:34.511Z,1513242574.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:34.546Z,1513242574.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:34.897Z,1513242574.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:34.947Z,1513242574.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:35.290Z,1513242575.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:35.311Z,1513242575.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:35.675Z,1513242575.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:35.743Z,1513242575.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:36.072Z,1513242576.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:36.099Z,1513242576.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:36.507Z,1513242576.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:36.542Z,1513242576.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:36.889Z,1513242576.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:36.903Z,1513242576.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:37.296Z,1513242577.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:37.310Z,1513242577.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:37.687Z,1513242577.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:37.711Z,1513242577.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:38.072Z,1513242578.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:38.106Z,1513242578.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:38.552Z,1513242578.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:38.584Z,1513242578.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:38.884Z,1513242578.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:38.908Z,1513242578.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:39.271Z,1513242579.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:39.308Z,1513242579.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:39.696Z,1513242579.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:39.711Z,1513242579.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:40.100Z,1513242580.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:40.116Z,1513242580.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:40.548Z,1513242580.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:40.591Z,1513242580.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:40.883Z,1513242580.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:40.906Z,1513242580.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:41.278Z,1513242581.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:41.293Z,1513242581.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:41.681Z,1513242581.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:41.744Z,1513242581.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:42.080Z,1513242582.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:42.099Z,1513242582.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:42.471Z,1513242582.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:42.491Z,1513242582.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:42.893Z,1513242582.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:42.925Z,1513242582.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:43.289Z,1513242583.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:43.303Z,1513242583.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:43.685Z,1513242583.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:43.707Z,1513242583.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:44.084Z,1513242584.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:44.128Z,1513242584.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:44.482Z,1513242584.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:44.496Z,1513242584.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:44.919Z,1513242584.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:44.935Z,1513242584.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:45.280Z,1513242585.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:45.299Z,1513242585.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:45.693Z,1513242585.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:45.708Z,1513242585.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:46.093Z,1513242586.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:46.108Z,1513242586.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:46.515Z,1513242586.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:46.541Z,1513242586.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:46.884Z,1513242586.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:46.900Z,1513242586.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:47.279Z,1513242587.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:47.299Z,1513242587.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:47.680Z,1513242587.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:47.698Z,1513242587.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:48.119Z,1513242588.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:48.162Z,1513242588.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:48.507Z,1513242588.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:48.538Z,1513242588.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:48.892Z,1513242588.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:48.907Z,1513242588.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:49.294Z,1513242589.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:49.308Z,1513242589.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:49.689Z,1513242589.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:49.703Z,1513242589.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:50.083Z,1513242590.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:50.097Z,1513242590.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:50.519Z,1513242590.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:50.543Z,1513242590.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:50.882Z,1513242590.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:50.914Z,1513242590.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:51.304Z,1513242591.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:51.348Z,1513242591.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:51.694Z,1513242591.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:51.709Z,1513242591.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:52.094Z,1513242592.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:52.115Z,1513242592.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:52.506Z,1513242592.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:52.520Z,1513242592.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:52.873Z,1513242592.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:52.923Z,1513242592.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:53.275Z,1513242593.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:53.307Z,1513242593.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:53.671Z,1513242593.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:53.707Z,1513242593.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:54.072Z,1513242594.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:54.103Z,1513242594.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:54.546Z,1513242594.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:54.598Z,1513242594.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:54.890Z,1513242594.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:54.905Z,1513242594.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:55.294Z,1513242595.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:55.315Z,1513242595.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:55.694Z,1513242595.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:55.763Z,1513242595.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:56.083Z,1513242596.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:56.158Z,1513242596.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:56.471Z,1513242596.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:56.497Z,1513242596.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:56.872Z,1513242596.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:56.904Z,1513242596.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:57.275Z,1513242597.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:57.343Z,1513242597.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:57.699Z,1513242597.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:57.714Z,1513242597.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:58.005Z,1513242598.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:58.090Z,1513242598.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:58.143Z,1513242598.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:58.488Z,1513242598.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:58.516Z,1513242598.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:58.803Z,1513242598.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:58.892Z,1513242598.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:58.916Z,1513242598.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:59.213Z,1513242599.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:59.279Z,1513242599.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:59.315Z,1513242599.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:09:59.676Z,1513242599.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:09:59.691Z,1513242599.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:00.078Z,1513242600.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:00.093Z,1513242600.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:00.498Z,1513242600.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:00.537Z,1513242600.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:00.922Z,1513242600.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:00.948Z,1513242600.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:01.293Z,1513242601.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:01.324Z,1513242601.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:01.682Z,1513242601.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:01.696Z,1513242601.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:02.078Z,1513242602.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:02.099Z,1513242602.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:02.507Z,1513242602.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:02.546Z,1513242602.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:02.872Z,1513242602.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:02.903Z,1513242602.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:03.275Z,1513242603.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:03.300Z,1513242603.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:03.690Z,1513242603.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:03.717Z,1513242603.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:04.101Z,1513242604.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:04.124Z,1513242604.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:04.507Z,1513242604.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:04.526Z,1513242604.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:04.876Z,1513242604.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:04.912Z,1513242604.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:05.271Z,1513242605.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:05.311Z,1513242605.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:05.678Z,1513242605.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:05.716Z,1513242605.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:06.076Z,1513242606.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:06.111Z,1513242606.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:06.516Z,1513242606.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:06.570Z,1513242606.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:06.894Z,1513242606.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:06.917Z,1513242606.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:07.323Z,1513242607.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:07.367Z,1513242607.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:07.690Z,1513242607.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:07.715Z,1513242607.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:08.078Z,1513242608.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:08.093Z,1513242608.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:08.536Z,1513242608.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:08.567Z,1513242608.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:08.881Z,1513242608.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:08.896Z,1513242608.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:09.281Z,1513242609.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:09.296Z,1513242609.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:09.691Z,1513242609.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:09.711Z,1513242609.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:10.090Z,1513242610.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:10.105Z,1513242610.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:10.489Z,1513242610.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:10.535Z,1513242610.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:10.882Z,1513242610.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:10.897Z,1513242610.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:11.282Z,1513242611.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:11.297Z,1513242611.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:11.680Z,1513242611.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:11.707Z,1513242611.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:11.997Z,1513242611.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:12.079Z,1513242612.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:12.102Z,1513242612.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:12.484Z,1513242612.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:12.499Z,1513242612.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:12.795Z,1513242612.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:12.892Z,1513242612.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:12.908Z,1513242612.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:13.213Z,1513242613.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:13.297Z,1513242613.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:13.312Z,1513242613.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:13.720Z,1513242613.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:13.755Z,1513242613.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:14.010Z,1513242614.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:14.071Z,1513242614.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:14.107Z,1513242614.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:14.511Z,1513242614.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:14.528Z,1513242614.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:14.805Z,1513242614.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:14.872Z,1513242614.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:14.908Z,1513242614.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:15.209Z,1513242615.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:15.275Z,1513242615.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:15.303Z,1513242615.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:15.700Z,1513242615.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:15.716Z,1513242615.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:16.096Z,1513242616.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:16.115Z,1513242616.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:16.509Z,1513242616.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:16.548Z,1513242616.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:16.914Z,1513242616.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:16.950Z,1513242616.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:17.274Z,1513242617.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:17.307Z,1513242617.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:17.683Z,1513242617.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:17.697Z,1513242617.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:18.083Z,1513242618.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:18.097Z,1513242618.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:18.492Z,1513242618.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:18.571Z,1513242618.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:18.899Z,1513242618.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:18.936Z,1513242618.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:19.293Z,1513242619.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:19.308Z,1513242619.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:19.693Z,1513242619.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:19.742Z,1513242619.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:20.129Z,1513242620.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:20.187Z,1513242620.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:20.505Z,1513242620.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:20.543Z,1513242620.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:20.886Z,1513242620.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:20.908Z,1513242620.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:21.283Z,1513242621.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:21.304Z,1513242621.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:21.694Z,1513242621.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:21.708Z,1513242621.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:22.095Z,1513242622.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:22.110Z,1513242622.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:22.533Z,1513242622.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:22.588Z,1513242622.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:22.881Z,1513242622.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:22.896Z,1513242622.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:23.314Z,1513242623.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:23.341Z,1513242623.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:23.681Z,1513242623.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:23.695Z,1513242623.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:24.079Z,1513242624.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:24.094Z,1513242624.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:24.481Z,1513242624.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:24.496Z,1513242624.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:24.894Z,1513242624.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:24.924Z,1513242624.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:25.293Z,1513242625.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:25.324Z,1513242625.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:25.682Z,1513242625.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:25.697Z,1513242625.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:26.080Z,1513242626.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:26.094Z,1513242626.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:26.498Z,1513242626.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:26.546Z,1513242626.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:26.886Z,1513242626.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:26.907Z,1513242626.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:27.279Z,1513242627.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:27.295Z,1513242627.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:27.685Z,1513242627.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:27.700Z,1513242627.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:28.090Z,1513242628.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:28.104Z,1513242628.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:28.538Z,1513242628.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:28.604Z,1513242628.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:28.882Z,1513242628.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:28.897Z,1513242628.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:29.279Z,1513242629.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:29.295Z,1513242629.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:29.728Z,1513242629.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:29.778Z,1513242629.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:29.792Z,1513242629.792 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:05:29.8Z
2017-12-14T09:10:29.792Z,1513242629.792 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:10:29.792Z,1513242629.792 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:10:30.081Z,1513242630.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:30.096Z,1513242630.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:30.894Z,1513242630.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:30.909Z,1513242630.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:31.031Z,1513242631.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:31.065Z,1513242631.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:34.652Z,1513242634.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:34.666Z,1513242634.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:34.751Z,1513242634.751 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0200.lzma
2017-12-14T09:10:34.787Z,1513242634.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:34.831Z,1513242634.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:35.128Z,1513242635.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:35.143Z,1513242635.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:35.500Z,1513242635.500 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0200.lzma.bak
2017-12-14T09:10:35.500Z,1513242635.500 [DataOverHttps](INFO): SBD MOMSN=5438382
2017-12-14T09:10:35.542Z,1513242635.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:35.566Z,1513242635.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:36.874Z,1513242636.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:36.890Z,1513242636.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:36.983Z,1513242636.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:37.025Z,1513242637.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:40.014Z,1513242640.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:40.502Z,1513242640.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:40.614Z,1513242640.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:40.725Z,1513242640.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:40.808Z,1513242640.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:40.810Z,1513242640.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:41.090Z,1513242641.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:41.128Z,1513242641.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:41.221Z,1513242641.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:41.482Z,1513242641.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:41.527Z,1513242641.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:41.874Z,1513242641.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:41.903Z,1513242641.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:42.263Z,1513242642.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:42.311Z,1513242642.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:45.602Z,1513242645.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:45.635Z,1513242645.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:45.707Z,1513242645.707 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0201.lzma
2017-12-14T09:10:45.756Z,1513242645.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:45.787Z,1513242645.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:46.118Z,1513242646.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:46.140Z,1513242646.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:46.479Z,1513242646.479 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0201.lzma.bak
2017-12-14T09:10:46.480Z,1513242646.480 [DataOverHttps](INFO): SBD MOMSN=5438384
2017-12-14T09:10:46.527Z,1513242646.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:46.550Z,1513242646.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:47.648Z,1513242647.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:47.663Z,1513242647.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:47.667Z,1513242647.667 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:10:47.667Z,1513242647.667 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:10:47.667Z,1513242647.667 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:10:47.763Z,1513242647.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:47.802Z,1513242647.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:51.421Z,1513242651.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:51.465Z,1513242651.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:51.570Z,1513242651.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:51.602Z,1513242651.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:51.934Z,1513242651.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:51.963Z,1513242651.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:52.330Z,1513242652.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:52.355Z,1513242652.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:52.721Z,1513242652.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:52.736Z,1513242652.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:53.112Z,1513242653.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:53.147Z,1513242653.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:53.519Z,1513242653.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:53.547Z,1513242653.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:53.921Z,1513242653.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:53.955Z,1513242653.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:54.342Z,1513242654.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:54.357Z,1513242654.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:54.742Z,1513242654.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:54.836Z,1513242654.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:55.126Z,1513242655.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:55.141Z,1513242655.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:55.524Z,1513242655.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:55.547Z,1513242655.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:55.931Z,1513242655.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:55.971Z,1513242655.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:56.313Z,1513242656.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:56.362Z,1513242656.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:56.744Z,1513242656.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:56.751Z,1513242656.751 [PNI_TCM](ERROR): CRC does not match. Expected:0x24050 got:0x1448
2017-12-14T09:10:56.778Z,1513242656.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:57.142Z,1513242657.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:57.157Z,1513242657.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:57.530Z,1513242657.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:57.557Z,1513242657.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:57.915Z,1513242657.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:57.949Z,1513242657.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:58.349Z,1513242658.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:58.397Z,1513242658.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:58.730Z,1513242658.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:58.765Z,1513242658.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:59.121Z,1513242659.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:59.144Z,1513242659.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:59.522Z,1513242659.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:59.544Z,1513242659.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:10:59.929Z,1513242659.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:10:59.944Z,1513242659.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:00.332Z,1513242660.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:00.351Z,1513242660.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:00.736Z,1513242660.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:00.762Z,1513242660.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:01.111Z,1513242661.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:01.160Z,1513242661.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:01.530Z,1513242661.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:01.537Z,1513242661.537 [PNI_TCM](ERROR): CRC does not match. Expected:0x22310 got:0x24576
2017-12-14T09:11:01.556Z,1513242661.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:01.918Z,1513242661.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:01.947Z,1513242661.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:02.334Z,1513242662.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:02.349Z,1513242662.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:02.721Z,1513242662.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:02.756Z,1513242662.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:03.147Z,1513242663.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:03.207Z,1513242663.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:03.540Z,1513242663.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:03.599Z,1513242663.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:03.920Z,1513242663.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:03.947Z,1513242663.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:04.320Z,1513242664.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:04.359Z,1513242664.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:04.759Z,1513242664.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:04.831Z,1513242664.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:05.130Z,1513242665.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:05.165Z,1513242665.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:05.525Z,1513242665.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:05.571Z,1513242665.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:05.933Z,1513242665.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:05.968Z,1513242665.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:06.337Z,1513242666.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:06.368Z,1513242666.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:06.729Z,1513242666.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:06.815Z,1513242666.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:07.124Z,1513242667.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:07.151Z,1513242667.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:07.521Z,1513242667.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:07.544Z,1513242667.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:07.917Z,1513242667.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:07.949Z,1513242667.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:08.010Z,1513242668.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:08.324Z,1513242668.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:08.339Z,1513242668.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:08.730Z,1513242668.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:08.807Z,1513242668.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:08.830Z,1513242668.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:09.140Z,1513242669.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:09.169Z,1513242669.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:09.213Z,1513242669.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:09.543Z,1513242669.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:09.564Z,1513242669.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:09.920Z,1513242669.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:09.947Z,1513242669.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:10.010Z,1513242670.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:10.310Z,1513242670.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:10.367Z,1513242670.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:10.724Z,1513242670.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:10.752Z,1513242670.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:10.806Z,1513242670.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:11.157Z,1513242671.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:11.176Z,1513242671.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:11.209Z,1513242671.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:11.527Z,1513242671.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:11.542Z,1513242671.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:11.931Z,1513242671.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:11.947Z,1513242671.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:12.335Z,1513242672.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:12.350Z,1513242672.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:12.736Z,1513242672.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:12.752Z,1513242672.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:13.119Z,1513242673.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:13.143Z,1513242673.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:13.528Z,1513242673.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:13.543Z,1513242673.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:13.926Z,1513242673.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:13.979Z,1513242673.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:14.326Z,1513242674.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:14.346Z,1513242674.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:14.748Z,1513242674.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:14.807Z,1513242674.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:15.134Z,1513242675.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:15.156Z,1513242675.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:15.539Z,1513242675.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:15.568Z,1513242675.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:15.921Z,1513242675.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:15.963Z,1513242675.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:16.324Z,1513242676.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:16.339Z,1513242676.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:16.722Z,1513242676.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:16.747Z,1513242676.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:17.123Z,1513242677.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:17.144Z,1513242677.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:17.519Z,1513242677.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:17.623Z,1513242677.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:17.951Z,1513242677.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:17.975Z,1513242677.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:18.333Z,1513242678.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:18.348Z,1513242678.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:18.739Z,1513242678.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:18.790Z,1513242678.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:19.127Z,1513242679.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:19.167Z,1513242679.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:19.167Z,1513242679.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173
2017-12-14T09:11:19.167Z,1513242679.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:11:19.173Z,1513242679.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:19.173Z,1513242679.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 173
2017-12-14T09:11:19.173Z,1513242679.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:11:19.175Z,1513242679.175 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:19.175Z,1513242679.175 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173
2017-12-14T09:11:19.175Z,1513242679.175 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:11:19.212Z,1513242679.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:11:19.217Z,1513242679.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:11:19.217Z,1513242679.217 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:11:19.525Z,1513242679.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:19.580Z,1513242679.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:11:19.580Z,1513242679.580 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173
2017-12-14T09:11:19.580Z,1513242679.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:11:19.580Z,1513242679.580 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 173
2017-12-14T09:11:19.585Z,1513242679.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:11:19.585Z,1513242679.585 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173
2017-12-14T09:11:19.919Z,1513242679.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:19.986Z,1513242679.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:11:19.986Z,1513242679.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:11:19.986Z,1513242679.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:11:19.987Z,1513242679.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:11:19.987Z,1513242679.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:11:19.987Z,1513242679.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:11:19.988Z,1513242679.988 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:11:19.988Z,1513242679.988 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:11:19.988Z,1513242679.988 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:11:20.322Z,1513242680.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:20.368Z,1513242680.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:20.790Z,1513242680.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:20.857Z,1513242680.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:21.179Z,1513242681.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:21.215Z,1513242681.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:21.527Z,1513242681.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:21.575Z,1513242681.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:21.916Z,1513242681.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:21.979Z,1513242681.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:22.320Z,1513242682.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:22.328Z,1513242682.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x41451 got:0x57603
2017-12-14T09:11:22.375Z,1513242682.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:22.733Z,1513242682.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:22.819Z,1513242682.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:23.157Z,1513242683.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:23.208Z,1513242683.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:23.512Z,1513242683.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:23.548Z,1513242683.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:23.942Z,1513242683.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:23.966Z,1513242683.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:24.333Z,1513242684.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:24.351Z,1513242684.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:24.731Z,1513242684.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:24.762Z,1513242684.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:25.118Z,1513242685.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:25.159Z,1513242685.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:25.520Z,1513242685.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:25.579Z,1513242685.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:25.925Z,1513242685.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:25.968Z,1513242685.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:26.323Z,1513242686.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:26.357Z,1513242686.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:26.758Z,1513242686.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:26.853Z,1513242686.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:27.132Z,1513242687.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:27.154Z,1513242687.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:27.541Z,1513242687.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:27.605Z,1513242687.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:27.928Z,1513242687.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:27.958Z,1513242687.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:28.320Z,1513242688.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:28.344Z,1513242688.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:28.718Z,1513242688.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:28.743Z,1513242688.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:29.124Z,1513242689.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:29.139Z,1513242689.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:29.526Z,1513242689.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:29.541Z,1513242689.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:29.938Z,1513242689.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:29.969Z,1513242689.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:30.399Z,1513242690.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:30.518Z,1513242690.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:30.766Z,1513242690.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:30.832Z,1513242690.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:31.119Z,1513242691.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:31.157Z,1513242691.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:31.513Z,1513242691.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:31.556Z,1513242691.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:31.917Z,1513242691.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:31.992Z,1513242691.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:32.321Z,1513242692.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:32.374Z,1513242692.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:32.728Z,1513242692.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:32.770Z,1513242692.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:33.131Z,1513242693.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:33.171Z,1513242693.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:33.563Z,1513242693.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:33.597Z,1513242693.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:33.722Z,1513242693.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:33.943Z,1513242693.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:33.967Z,1513242693.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:34.322Z,1513242694.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:34.357Z,1513242694.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:34.517Z,1513242694.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:34.732Z,1513242694.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:34.837Z,1513242694.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:35.132Z,1513242695.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:35.156Z,1513242695.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:35.523Z,1513242695.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:35.567Z,1513242695.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:35.936Z,1513242695.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:35.999Z,1513242695.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:36.341Z,1513242696.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:36.360Z,1513242696.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:36.800Z,1513242696.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:36.892Z,1513242696.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:37.154Z,1513242697.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:37.229Z,1513242697.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:37.544Z,1513242697.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:37.560Z,1513242697.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:37.912Z,1513242697.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:37.944Z,1513242697.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:38.322Z,1513242698.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:38.350Z,1513242698.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:38.750Z,1513242698.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:38.769Z,1513242698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:39.135Z,1513242699.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:39.186Z,1513242699.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:39.554Z,1513242699.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:39.577Z,1513242699.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:39.937Z,1513242699.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:39.976Z,1513242699.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:40.329Z,1513242700.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:40.368Z,1513242700.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:40.741Z,1513242700.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:40.821Z,1513242700.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:41.136Z,1513242701.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:41.182Z,1513242701.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:41.531Z,1513242701.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:41.592Z,1513242701.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:41.926Z,1513242701.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:41.968Z,1513242701.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:42.343Z,1513242702.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:42.381Z,1513242702.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:42.742Z,1513242702.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:42.798Z,1513242702.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:43.146Z,1513242703.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:43.192Z,1513242703.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:43.516Z,1513242703.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:43.559Z,1513242703.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:43.924Z,1513242703.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:43.959Z,1513242703.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:44.333Z,1513242704.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:44.361Z,1513242704.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:44.747Z,1513242704.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:44.767Z,1513242704.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:45.132Z,1513242705.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:45.179Z,1513242705.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:45.540Z,1513242705.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:45.579Z,1513242705.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:45.938Z,1513242705.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:45.981Z,1513242705.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:46.330Z,1513242706.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:46.376Z,1513242706.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:46.730Z,1513242706.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:46.756Z,1513242706.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:47.133Z,1513242707.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:47.218Z,1513242707.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:47.519Z,1513242707.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:47.599Z,1513242707.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:47.962Z,1513242707.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:48.023Z,1513242708.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:48.363Z,1513242708.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:48.416Z,1513242708.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:54.121Z,1513242714.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:54.137Z,1513242714.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:54.232Z,1513242714.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:54.279Z,1513242714.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:54.604Z,1513242714.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:54.664Z,1513242714.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:54.989Z,1513242714.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:55.003Z,1513242715.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:55.389Z,1513242715.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:55.432Z,1513242715.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:55.805Z,1513242715.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:55.828Z,1513242715.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:56.201Z,1513242716.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:56.235Z,1513242716.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:56.606Z,1513242716.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:56.629Z,1513242716.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:56.995Z,1513242716.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:57.038Z,1513242717.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:57.383Z,1513242717.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:57.399Z,1513242717.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:57.790Z,1513242717.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:57.804Z,1513242717.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:58.188Z,1513242718.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:58.203Z,1513242718.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:58.593Z,1513242718.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:58.608Z,1513242718.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:59.005Z,1513242719.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:59.039Z,1513242719.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:59.406Z,1513242719.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:59.432Z,1513242719.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:11:59.785Z,1513242719.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:11:59.800Z,1513242719.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:00.193Z,1513242720.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:00.212Z,1513242720.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:00.609Z,1513242720.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:00.644Z,1513242720.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:00.998Z,1513242720.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:01.012Z,1513242721.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:01.398Z,1513242721.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:01.412Z,1513242721.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:01.798Z,1513242721.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:01.812Z,1513242721.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:02.200Z,1513242722.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:02.248Z,1513242722.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:02.605Z,1513242722.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:02.627Z,1513242722.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:03.006Z,1513242723.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:03.020Z,1513242723.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:03.408Z,1513242723.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:03.422Z,1513242723.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:03.796Z,1513242723.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:03.851Z,1513242723.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:04.198Z,1513242724.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:04.212Z,1513242724.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:04.608Z,1513242724.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:04.623Z,1513242724.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:05.026Z,1513242725.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:05.057Z,1513242725.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:05.402Z,1513242725.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:05.417Z,1513242725.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:05.810Z,1513242725.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:05.825Z,1513242725.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:06.188Z,1513242726.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:06.215Z,1513242726.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:06.605Z,1513242726.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:06.620Z,1513242726.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:07.003Z,1513242727.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:07.046Z,1513242727.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:07.407Z,1513242727.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:07.430Z,1513242727.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:07.784Z,1513242727.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:07.810Z,1513242727.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:08.183Z,1513242728.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:08.215Z,1513242728.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:08.608Z,1513242728.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:08.623Z,1513242728.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:09.002Z,1513242729.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:09.027Z,1513242729.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:09.407Z,1513242729.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:09.422Z,1513242729.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:09.784Z,1513242729.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:09.814Z,1513242729.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:10.219Z,1513242730.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:10.236Z,1513242730.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:10.604Z,1513242730.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:10.618Z,1513242730.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:11.011Z,1513242731.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:11.032Z,1513242731.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:11.401Z,1513242731.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:11.429Z,1513242731.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:11.783Z,1513242731.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:11.816Z,1513242731.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:12.183Z,1513242732.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:12.214Z,1513242732.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:12.603Z,1513242732.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:12.618Z,1513242732.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:13.021Z,1513242733.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:13.036Z,1513242733.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:13.409Z,1513242733.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:13.423Z,1513242733.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:13.786Z,1513242733.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:13.814Z,1513242733.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:14.191Z,1513242734.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:14.220Z,1513242734.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:14.608Z,1513242734.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:14.630Z,1513242734.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:15.002Z,1513242735.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:15.059Z,1513242735.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:15.413Z,1513242735.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:15.435Z,1513242735.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:15.829Z,1513242735.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:15.864Z,1513242735.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:16.183Z,1513242736.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:16.243Z,1513242736.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:16.598Z,1513242736.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:16.632Z,1513242736.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:16.998Z,1513242736.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:17.033Z,1513242737.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:17.394Z,1513242737.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:17.462Z,1513242737.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:17.787Z,1513242737.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:17.827Z,1513242737.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:18.188Z,1513242738.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:18.239Z,1513242738.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:18.599Z,1513242738.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:18.626Z,1513242738.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:19.036Z,1513242739.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:19.056Z,1513242739.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:19.394Z,1513242739.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:19.427Z,1513242739.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:19.788Z,1513242739.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:19.826Z,1513242739.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:20.184Z,1513242740.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:20.210Z,1513242740.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:20.594Z,1513242740.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:20.621Z,1513242740.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:20.997Z,1513242740.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:21.035Z,1513242741.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:21.397Z,1513242741.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:21.423Z,1513242741.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:21.781Z,1513242741.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:21.829Z,1513242741.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:22.190Z,1513242742.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:22.263Z,1513242742.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:22.593Z,1513242742.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:22.608Z,1513242742.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:23.002Z,1513242743.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:23.031Z,1513242743.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:23.405Z,1513242743.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:23.427Z,1513242743.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:23.783Z,1513242743.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:23.819Z,1513242743.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:24.196Z,1513242744.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:24.215Z,1513242744.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:24.610Z,1513242744.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:24.624Z,1513242744.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:25.008Z,1513242745.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:25.023Z,1513242745.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:25.416Z,1513242745.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:25.447Z,1513242745.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:25.790Z,1513242745.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:25.821Z,1513242745.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:26.191Z,1513242746.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:26.205Z,1513242746.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:26.594Z,1513242746.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:26.646Z,1513242746.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:26.998Z,1513242746.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:27.012Z,1513242747.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:27.413Z,1513242747.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:27.447Z,1513242747.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:27.791Z,1513242747.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:27.812Z,1513242747.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:28.190Z,1513242748.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:28.238Z,1513242748.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:28.601Z,1513242748.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:28.666Z,1513242748.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:28.997Z,1513242748.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:29.012Z,1513242749.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:29.394Z,1513242749.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:29.409Z,1513242749.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:29.791Z,1513242749.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:29.807Z,1513242749.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:30.185Z,1513242750.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:30.200Z,1513242750.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:30.593Z,1513242750.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:30.608Z,1513242750.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:30.998Z,1513242750.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:31.019Z,1513242751.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:31.396Z,1513242751.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:31.423Z,1513242751.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:31.811Z,1513242751.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:31.826Z,1513242751.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:32.203Z,1513242752.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:32.235Z,1513242752.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:32.590Z,1513242752.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:32.605Z,1513242752.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:33.006Z,1513242753.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:33.033Z,1513242753.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:33.402Z,1513242753.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:33.428Z,1513242753.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:33.789Z,1513242753.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:33.804Z,1513242753.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:34.188Z,1513242754.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:34.208Z,1513242754.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:34.605Z,1513242754.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:34.640Z,1513242754.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:35.007Z,1513242755.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:35.038Z,1513242755.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:35.418Z,1513242755.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:35.448Z,1513242755.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:35.793Z,1513242755.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:35.808Z,1513242755.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:36.187Z,1513242756.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:36.215Z,1513242756.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:36.602Z,1513242756.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:36.617Z,1513242756.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:37.002Z,1513242757.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:37.057Z,1513242757.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:37.409Z,1513242757.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:37.431Z,1513242757.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:37.784Z,1513242757.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:37.823Z,1513242757.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:38.207Z,1513242758.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:38.257Z,1513242758.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:38.602Z,1513242758.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:38.623Z,1513242758.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:39.007Z,1513242759.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:39.122Z,1513242759.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:39.410Z,1513242759.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:39.424Z,1513242759.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:39.798Z,1513242759.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:39.813Z,1513242759.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:40.183Z,1513242760.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:40.248Z,1513242760.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:40.606Z,1513242760.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:40.621Z,1513242760.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:41.008Z,1513242761.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:41.059Z,1513242761.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:41.411Z,1513242761.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:41.458Z,1513242761.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:41.789Z,1513242761.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:41.815Z,1513242761.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:42.189Z,1513242762.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:42.216Z,1513242762.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:42.602Z,1513242762.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:42.623Z,1513242762.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:43.004Z,1513242763.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:43.033Z,1513242763.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:43.398Z,1513242763.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:43.424Z,1513242763.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:43.788Z,1513242763.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:43.815Z,1513242763.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:44.183Z,1513242764.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:44.222Z,1513242764.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:44.621Z,1513242764.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:44.656Z,1513242764.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:45.007Z,1513242765.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:45.023Z,1513242765.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:45.408Z,1513242765.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:45.422Z,1513242765.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:45.781Z,1513242765.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:45.820Z,1513242765.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:46.184Z,1513242766.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:46.220Z,1513242766.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:46.602Z,1513242766.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:46.633Z,1513242766.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:47.009Z,1513242767.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:47.024Z,1513242767.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:47.393Z,1513242767.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:47.424Z,1513242767.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:47.783Z,1513242767.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:47.819Z,1513242767.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:48.191Z,1513242768.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:48.220Z,1513242768.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:48.616Z,1513242768.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:48.630Z,1513242768.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:52.131Z,1513242772.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:52.174Z,1513242772.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:52.287Z,1513242772.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:52.327Z,1513242772.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:52.647Z,1513242772.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:52.678Z,1513242772.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:53.041Z,1513242773.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:53.056Z,1513242773.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:53.439Z,1513242773.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:53.479Z,1513242773.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:53.850Z,1513242773.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:53.876Z,1513242773.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:54.276Z,1513242774.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:54.325Z,1513242774.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:54.642Z,1513242774.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:54.669Z,1513242774.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:55.039Z,1513242775.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:55.059Z,1513242775.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:55.441Z,1513242775.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:55.456Z,1513242775.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:55.836Z,1513242775.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:55.875Z,1513242775.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:56.236Z,1513242776.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:56.251Z,1513242776.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:56.650Z,1513242776.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:56.676Z,1513242776.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:57.054Z,1513242777.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:57.076Z,1513242777.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:57.472Z,1513242777.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:57.508Z,1513242777.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:57.841Z,1513242777.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:57.855Z,1513242777.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:58.236Z,1513242778.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:58.260Z,1513242778.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:58.639Z,1513242778.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:58.659Z,1513242778.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:59.039Z,1513242779.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:59.059Z,1513242779.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:59.442Z,1513242779.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:59.458Z,1513242779.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:12:59.843Z,1513242779.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:12:59.860Z,1513242779.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:00.250Z,1513242780.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:00.266Z,1513242780.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:00.671Z,1513242780.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:00.710Z,1513242780.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:01.038Z,1513242781.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:01.094Z,1513242781.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:01.437Z,1513242781.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:01.452Z,1513242781.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:01.838Z,1513242781.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:01.852Z,1513242781.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:02.237Z,1513242782.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:02.264Z,1513242782.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:02.644Z,1513242782.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:02.709Z,1513242782.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:03.046Z,1513242783.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:03.060Z,1513242783.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:03.450Z,1513242783.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:03.458Z,1513242783.458 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T09:13:03.458Z,1513242783.458 [BPC1] Data Fault, FailCount= 1
2017-12-14T09:13:03.458Z,1513242783.458 [BPC1](ERROR): Data Fault
2017-12-14T09:13:03.466Z,1513242783.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:03.512Z,1513242783.512 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:13:03.845Z,1513242783.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:03.860Z,1513242783.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:04.238Z,1513242784.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:04.287Z,1513242784.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:04.631Z,1513242784.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:04.667Z,1513242784.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:04.697Z,1513242784.697 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:13:04.697Z,1513242784.697 [BPC1] No Fault, FailCount= 1
2017-12-14T09:13:05.032Z,1513242785.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:05.115Z,1513242785.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:05.435Z,1513242785.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:05.467Z,1513242785.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:05.841Z,1513242785.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:05.875Z,1513242785.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:06.254Z,1513242786.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:06.269Z,1513242786.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:06.643Z,1513242786.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:06.669Z,1513242786.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:07.031Z,1513242787.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:07.067Z,1513242787.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:07.451Z,1513242787.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:07.499Z,1513242787.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:07.848Z,1513242787.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:07.880Z,1513242787.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:08.243Z,1513242788.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:08.279Z,1513242788.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:08.646Z,1513242788.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:08.660Z,1513242788.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:09.041Z,1513242789.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:09.057Z,1513242789.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:09.453Z,1513242789.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:09.480Z,1513242789.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:09.843Z,1513242789.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:09.858Z,1513242789.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:10.243Z,1513242790.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:10.258Z,1513242790.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:10.661Z,1513242790.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:10.694Z,1513242790.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:11.040Z,1513242791.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:11.055Z,1513242791.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:11.436Z,1513242791.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:11.451Z,1513242791.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:11.846Z,1513242791.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:11.873Z,1513242791.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:12.255Z,1513242792.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:12.269Z,1513242792.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:12.651Z,1513242792.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:12.671Z,1513242792.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:13.031Z,1513242793.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:13.058Z,1513242793.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:13.431Z,1513242793.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:13.476Z,1513242793.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:13.863Z,1513242793.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:13.896Z,1513242793.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:14.231Z,1513242794.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:14.256Z,1513242794.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:14.655Z,1513242794.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:14.670Z,1513242794.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:15.053Z,1513242795.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:15.072Z,1513242795.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:15.452Z,1513242795.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:15.467Z,1513242795.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:15.835Z,1513242795.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:15.863Z,1513242795.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:16.228Z,1513242796.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:16.263Z,1513242796.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:16.661Z,1513242796.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:16.676Z,1513242796.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:17.063Z,1513242797.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:17.098Z,1513242797.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:17.442Z,1513242797.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:17.457Z,1513242797.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:17.840Z,1513242797.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:17.859Z,1513242797.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:18.231Z,1513242798.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:18.246Z,1513242798.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:18.638Z,1513242798.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:18.661Z,1513242798.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:19.038Z,1513242799.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:19.053Z,1513242799.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:19.435Z,1513242799.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:19.450Z,1513242799.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:19.846Z,1513242799.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:19.873Z,1513242799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:20.259Z,1513242800.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:20.294Z,1513242800.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:20.645Z,1513242800.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:20.684Z,1513242800.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:21.038Z,1513242801.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:21.055Z,1513242801.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:21.438Z,1513242801.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:21.456Z,1513242801.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:21.841Z,1513242801.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:21.856Z,1513242801.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:22.241Z,1513242802.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:22.263Z,1513242802.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:22.642Z,1513242802.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:22.658Z,1513242802.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:23.046Z,1513242803.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:23.067Z,1513242803.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:23.454Z,1513242803.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:23.493Z,1513242803.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:23.847Z,1513242803.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:23.880Z,1513242803.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:24.231Z,1513242804.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:24.295Z,1513242804.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:24.647Z,1513242804.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:24.675Z,1513242804.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:25.041Z,1513242805.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:25.072Z,1513242805.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:25.435Z,1513242805.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:25.502Z,1513242805.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:25.841Z,1513242805.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:25.856Z,1513242805.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:26.252Z,1513242806.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:26.279Z,1513242806.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:26.648Z,1513242806.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:26.736Z,1513242806.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:27.052Z,1513242807.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:27.067Z,1513242807.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:27.442Z,1513242807.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:27.495Z,1513242807.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:27.841Z,1513242807.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:27.856Z,1513242807.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:28.240Z,1513242808.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:28.255Z,1513242808.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:28.652Z,1513242808.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:28.666Z,1513242808.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:29.065Z,1513242809.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:29.099Z,1513242809.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:29.443Z,1513242809.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:29.470Z,1513242809.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:29.844Z,1513242809.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:29.860Z,1513242809.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:30.231Z,1513242810.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:30.262Z,1513242810.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:30.651Z,1513242810.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:30.671Z,1513242810.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:31.059Z,1513242811.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:31.079Z,1513242811.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:31.456Z,1513242811.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:31.471Z,1513242811.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:31.825Z,1513242811.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:31.863Z,1513242811.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:32.235Z,1513242812.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:32.260Z,1513242812.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:32.631Z,1513242812.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:32.660Z,1513242812.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:33.040Z,1513242813.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:33.107Z,1513242813.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:33.432Z,1513242813.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:33.468Z,1513242813.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:33.854Z,1513242813.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:33.880Z,1513242813.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:34.250Z,1513242814.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:34.285Z,1513242814.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:34.650Z,1513242814.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:34.673Z,1513242814.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:35.038Z,1513242815.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:35.052Z,1513242815.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:35.435Z,1513242815.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:35.449Z,1513242815.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:35.840Z,1513242815.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:35.902Z,1513242815.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:36.269Z,1513242816.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:36.346Z,1513242816.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:36.655Z,1513242816.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:36.683Z,1513242816.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:37.050Z,1513242817.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:37.082Z,1513242817.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:37.454Z,1513242817.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:37.486Z,1513242817.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:37.838Z,1513242817.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:37.860Z,1513242817.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:38.241Z,1513242818.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:38.256Z,1513242818.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:38.649Z,1513242818.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:38.693Z,1513242818.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:39.036Z,1513242819.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:39.059Z,1513242819.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:39.442Z,1513242819.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:39.458Z,1513242819.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:39.855Z,1513242819.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:39.870Z,1513242819.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:40.254Z,1513242820.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:40.275Z,1513242820.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:40.647Z,1513242820.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:40.703Z,1513242820.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:41.044Z,1513242821.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:41.073Z,1513242821.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:41.428Z,1513242821.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:41.443Z,1513242821.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:41.831Z,1513242821.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:41.846Z,1513242821.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:42.235Z,1513242822.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:42.249Z,1513242822.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:42.670Z,1513242822.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:42.695Z,1513242822.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:43.058Z,1513242823.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:43.073Z,1513242823.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:43.453Z,1513242823.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:43.488Z,1513242823.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:43.835Z,1513242823.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:43.872Z,1513242823.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:44.231Z,1513242824.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:44.274Z,1513242824.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:44.631Z,1513242824.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:44.646Z,1513242824.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:45.040Z,1513242825.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:45.076Z,1513242825.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:45.439Z,1513242825.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:45.478Z,1513242825.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:45.846Z,1513242825.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:45.873Z,1513242825.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:46.268Z,1513242826.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:46.283Z,1513242826.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:46.649Z,1513242826.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:46.692Z,1513242826.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:47.035Z,1513242827.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:47.050Z,1513242827.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:47.436Z,1513242827.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:47.490Z,1513242827.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:47.836Z,1513242827.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:47.851Z,1513242827.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:48.239Z,1513242828.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:48.295Z,1513242828.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:48.658Z,1513242828.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:48.692Z,1513242828.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:52.185Z,1513242832.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:52.200Z,1513242832.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:52.316Z,1513242832.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:52.363Z,1513242832.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:52.686Z,1513242832.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:52.723Z,1513242832.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:53.088Z,1513242833.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:53.119Z,1513242833.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:53.483Z,1513242833.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:53.521Z,1513242833.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:53.896Z,1513242833.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:53.936Z,1513242833.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:54.294Z,1513242834.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:54.308Z,1513242834.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:54.686Z,1513242834.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:54.731Z,1513242834.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:55.084Z,1513242835.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:55.119Z,1513242835.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:55.479Z,1513242835.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:55.494Z,1513242835.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:55.884Z,1513242835.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:55.899Z,1513242835.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:56.284Z,1513242836.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:56.336Z,1513242836.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:56.703Z,1513242836.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:56.718Z,1513242836.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:57.098Z,1513242837.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:57.135Z,1513242837.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:57.498Z,1513242837.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:57.524Z,1513242837.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:57.877Z,1513242837.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:57.919Z,1513242837.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:58.273Z,1513242838.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:58.288Z,1513242838.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:58.675Z,1513242838.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:58.758Z,1513242838.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:59.105Z,1513242839.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:59.128Z,1513242839.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:59.483Z,1513242839.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:59.518Z,1513242839.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:13:59.896Z,1513242839.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:13:59.923Z,1513242839.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:00.289Z,1513242840.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:00.315Z,1513242840.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:00.686Z,1513242840.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:00.709Z,1513242840.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:01.087Z,1513242841.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:01.121Z,1513242841.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:01.484Z,1513242841.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:01.505Z,1513242841.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:01.894Z,1513242841.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:01.943Z,1513242841.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:02.283Z,1513242842.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:02.303Z,1513242842.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:02.689Z,1513242842.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:02.731Z,1513242842.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:03.090Z,1513242843.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:03.112Z,1513242843.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:03.490Z,1513242843.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:03.536Z,1513242843.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:03.888Z,1513242843.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:03.903Z,1513242843.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:04.286Z,1513242844.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:04.308Z,1513242844.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:04.684Z,1513242844.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:04.704Z,1513242844.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:05.130Z,1513242845.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:05.182Z,1513242845.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:05.491Z,1513242845.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:05.526Z,1513242845.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:05.899Z,1513242845.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:05.958Z,1513242845.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:06.303Z,1513242846.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:06.327Z,1513242846.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:06.705Z,1513242846.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:06.746Z,1513242846.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:07.075Z,1513242847.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:07.127Z,1513242847.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:07.483Z,1513242847.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:07.565Z,1513242847.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:07.881Z,1513242847.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:07.916Z,1513242847.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:08.314Z,1513242848.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:08.383Z,1513242848.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:08.699Z,1513242848.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:08.731Z,1513242848.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:09.090Z,1513242849.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:09.135Z,1513242849.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:09.486Z,1513242849.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:09.507Z,1513242849.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:09.886Z,1513242849.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:09.901Z,1513242849.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:10.285Z,1513242850.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:10.299Z,1513242850.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:10.683Z,1513242850.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:10.698Z,1513242850.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:11.102Z,1513242851.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:11.118Z,1513242851.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:11.539Z,1513242851.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:11.567Z,1513242851.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:11.922Z,1513242851.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:11.952Z,1513242851.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:12.309Z,1513242852.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:12.325Z,1513242852.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:12.699Z,1513242852.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:12.718Z,1513242852.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:13.075Z,1513242853.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:13.119Z,1513242853.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:13.479Z,1513242853.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:13.506Z,1513242853.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:13.880Z,1513242853.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:13.915Z,1513242853.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:14.280Z,1513242854.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:14.312Z,1513242854.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:14.707Z,1513242854.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:14.759Z,1513242854.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:15.090Z,1513242855.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:15.128Z,1513242855.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:15.500Z,1513242855.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:15.522Z,1513242855.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:15.878Z,1513242855.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:15.922Z,1513242855.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:16.284Z,1513242856.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:16.311Z,1513242856.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:16.680Z,1513242856.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:16.712Z,1513242856.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:17.081Z,1513242857.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:17.112Z,1513242857.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:17.485Z,1513242857.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:17.542Z,1513242857.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:17.890Z,1513242857.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:17.947Z,1513242857.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:18.298Z,1513242858.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:18.321Z,1513242858.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:18.691Z,1513242858.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:18.714Z,1513242858.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:19.085Z,1513242859.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:19.116Z,1513242859.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:19.486Z,1513242859.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:19.535Z,1513242859.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:19.890Z,1513242859.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:19.905Z,1513242859.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:20.288Z,1513242860.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:20.310Z,1513242860.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:20.311Z,1513242860.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174
2017-12-14T09:14:20.311Z,1513242860.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:14:20.312Z,1513242860.312 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:20.313Z,1513242860.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 174
2017-12-14T09:14:20.313Z,1513242860.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:14:20.315Z,1513242860.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:20.315Z,1513242860.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174
2017-12-14T09:14:20.315Z,1513242860.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:14:20.344Z,1513242860.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:14:20.344Z,1513242860.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:14:20.353Z,1513242860.353 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:14:20.701Z,1513242860.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:20.739Z,1513242860.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:14:20.739Z,1513242860.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174
2017-12-14T09:14:20.739Z,1513242860.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:14:20.739Z,1513242860.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 174
2017-12-14T09:14:20.740Z,1513242860.740 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:14:20.740Z,1513242860.740 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174
2017-12-14T09:14:21.098Z,1513242861.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:21.147Z,1513242861.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:14:21.147Z,1513242861.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:14:21.148Z,1513242861.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:14:21.148Z,1513242861.148 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:14:21.153Z,1513242861.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:14:21.153Z,1513242861.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:14:21.154Z,1513242861.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:14:21.154Z,1513242861.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:14:21.154Z,1513242861.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:14:21.484Z,1513242861.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:21.527Z,1513242861.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:21.879Z,1513242861.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:21.914Z,1513242861.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:22.303Z,1513242862.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:22.323Z,1513242862.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:22.678Z,1513242862.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:22.716Z,1513242862.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:23.081Z,1513242863.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:23.095Z,1513242863.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:23.480Z,1513242863.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:23.500Z,1513242863.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:23.889Z,1513242863.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:23.912Z,1513242863.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:24.293Z,1513242864.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:24.354Z,1513242864.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:24.695Z,1513242864.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:24.741Z,1513242864.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:25.097Z,1513242865.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:25.119Z,1513242865.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:25.475Z,1513242865.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:25.514Z,1513242865.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:25.880Z,1513242865.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:25.908Z,1513242865.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:26.275Z,1513242866.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:26.306Z,1513242866.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:26.698Z,1513242866.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:26.721Z,1513242866.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:27.108Z,1513242867.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:27.135Z,1513242867.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:27.499Z,1513242867.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:27.560Z,1513242867.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:27.876Z,1513242867.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:27.935Z,1513242867.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:28.283Z,1513242868.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:28.347Z,1513242868.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:28.679Z,1513242868.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:28.719Z,1513242868.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:29.084Z,1513242869.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:29.141Z,1513242869.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:29.487Z,1513242869.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:29.502Z,1513242869.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:29.903Z,1513242869.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:29.948Z,1513242869.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:30.297Z,1513242870.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:30.314Z,1513242870.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:30.710Z,1513242870.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:30.780Z,1513242870.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:31.075Z,1513242871.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:31.112Z,1513242871.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:31.475Z,1513242871.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:31.513Z,1513242871.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:31.880Z,1513242871.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:31.917Z,1513242871.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:32.279Z,1513242872.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:32.294Z,1513242872.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:32.689Z,1513242872.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:32.727Z,1513242872.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:33.097Z,1513242873.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:33.135Z,1513242873.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:33.496Z,1513242873.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:33.523Z,1513242873.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:33.877Z,1513242873.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:33.914Z,1513242873.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:34.278Z,1513242874.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:34.312Z,1513242874.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:34.682Z,1513242874.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:34.707Z,1513242874.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:35.084Z,1513242875.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:35.106Z,1513242875.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:35.488Z,1513242875.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:35.502Z,1513242875.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:35.893Z,1513242875.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:35.907Z,1513242875.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:36.294Z,1513242876.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:36.314Z,1513242876.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:36.698Z,1513242876.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:36.715Z,1513242876.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:37.095Z,1513242877.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:37.147Z,1513242877.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:37.475Z,1513242877.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:37.489Z,1513242877.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:37.884Z,1513242877.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:37.915Z,1513242877.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:38.282Z,1513242878.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:38.332Z,1513242878.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:38.697Z,1513242878.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:38.727Z,1513242878.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:39.090Z,1513242879.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:39.127Z,1513242879.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:39.499Z,1513242879.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:39.529Z,1513242879.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:39.883Z,1513242879.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:39.908Z,1513242879.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:40.313Z,1513242880.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:40.347Z,1513242880.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:40.679Z,1513242880.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:40.709Z,1513242880.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:41.084Z,1513242881.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:41.118Z,1513242881.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:41.484Z,1513242881.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:41.521Z,1513242881.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:41.894Z,1513242881.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:41.928Z,1513242881.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:42.297Z,1513242882.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:42.335Z,1513242882.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:42.694Z,1513242882.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:42.724Z,1513242882.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:43.082Z,1513242883.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:43.116Z,1513242883.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:43.483Z,1513242883.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:43.497Z,1513242883.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:43.876Z,1513242883.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:43.903Z,1513242883.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:44.287Z,1513242884.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:44.348Z,1513242884.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:44.697Z,1513242884.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:44.715Z,1513242884.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:45.098Z,1513242885.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:45.143Z,1513242885.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:45.495Z,1513242885.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:45.523Z,1513242885.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:45.889Z,1513242885.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:45.916Z,1513242885.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:46.280Z,1513242886.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:46.315Z,1513242886.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:46.715Z,1513242886.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:46.771Z,1513242886.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:47.076Z,1513242887.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:47.124Z,1513242887.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:47.477Z,1513242887.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:47.510Z,1513242887.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:47.898Z,1513242887.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:47.915Z,1513242887.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:48.304Z,1513242888.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:48.346Z,1513242888.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:48.701Z,1513242888.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:48.723Z,1513242888.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:52.101Z,1513242892.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:52.164Z,1513242892.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:52.238Z,1513242892.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:52.275Z,1513242892.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:52.654Z,1513242892.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:52.681Z,1513242892.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:53.058Z,1513242893.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:53.136Z,1513242893.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:53.450Z,1513242893.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:53.466Z,1513242893.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:53.832Z,1513242893.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:53.887Z,1513242893.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:54.230Z,1513242894.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:54.265Z,1513242894.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:54.632Z,1513242894.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:54.663Z,1513242894.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:55.032Z,1513242895.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:55.064Z,1513242895.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:55.435Z,1513242895.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:55.474Z,1513242895.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:55.838Z,1513242895.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:55.853Z,1513242895.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:56.272Z,1513242896.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:56.326Z,1513242896.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:56.655Z,1513242896.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:56.669Z,1513242896.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:57.034Z,1513242897.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:57.071Z,1513242897.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:57.445Z,1513242897.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:57.460Z,1513242897.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:57.832Z,1513242897.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:57.879Z,1513242897.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:58.235Z,1513242898.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:58.266Z,1513242898.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:58.642Z,1513242898.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:58.671Z,1513242898.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:59.055Z,1513242899.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:59.075Z,1513242899.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:59.442Z,1513242899.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:59.479Z,1513242899.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:14:59.839Z,1513242899.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:14:59.869Z,1513242899.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:00.231Z,1513242900.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:00.251Z,1513242900.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:00.636Z,1513242900.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:00.663Z,1513242900.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:01.036Z,1513242901.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:01.063Z,1513242901.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:01.444Z,1513242901.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:01.458Z,1513242901.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:01.846Z,1513242901.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:01.860Z,1513242901.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:02.246Z,1513242902.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:02.304Z,1513242902.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:02.661Z,1513242902.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:02.715Z,1513242902.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:03.039Z,1513242903.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:03.059Z,1513242903.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:03.439Z,1513242903.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:03.454Z,1513242903.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:03.840Z,1513242903.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:03.863Z,1513242903.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:04.245Z,1513242904.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:04.260Z,1513242904.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:04.645Z,1513242904.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:04.667Z,1513242904.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:05.049Z,1513242905.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:05.071Z,1513242905.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:05.442Z,1513242905.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:05.469Z,1513242905.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:05.870Z,1513242905.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:05.906Z,1513242905.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:06.231Z,1513242906.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:06.264Z,1513242906.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:06.650Z,1513242906.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:06.669Z,1513242906.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:07.053Z,1513242907.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:07.075Z,1513242907.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:07.455Z,1513242907.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:07.475Z,1513242907.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:07.828Z,1513242907.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:07.867Z,1513242907.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:08.231Z,1513242908.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:08.271Z,1513242908.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:08.631Z,1513242908.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:08.671Z,1513242908.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:09.061Z,1513242909.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:09.084Z,1513242909.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:09.442Z,1513242909.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:09.473Z,1513242909.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:09.853Z,1513242909.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:09.883Z,1513242909.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:10.250Z,1513242910.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:10.272Z,1513242910.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:10.647Z,1513242910.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:10.677Z,1513242910.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:11.036Z,1513242911.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:11.052Z,1513242911.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:11.439Z,1513242911.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:11.476Z,1513242911.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:11.842Z,1513242911.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:11.857Z,1513242911.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:12.257Z,1513242912.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:12.293Z,1513242912.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:12.651Z,1513242912.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:12.666Z,1513242912.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:13.048Z,1513242913.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:13.110Z,1513242913.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:13.452Z,1513242913.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:13.473Z,1513242913.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:13.835Z,1513242913.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:13.860Z,1513242913.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:14.231Z,1513242914.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:14.263Z,1513242914.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:14.632Z,1513242914.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:14.683Z,1513242914.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:15.034Z,1513242915.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:15.048Z,1513242915.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:15.450Z,1513242915.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:15.469Z,1513242915.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:15.851Z,1513242915.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:15.900Z,1513242915.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:16.254Z,1513242916.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:16.270Z,1513242916.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:16.631Z,1513242916.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:16.684Z,1513242916.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:17.031Z,1513242917.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:17.068Z,1513242917.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:17.430Z,1513242917.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:17.461Z,1513242917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:17.837Z,1513242917.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:17.867Z,1513242917.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:18.231Z,1513242918.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:18.268Z,1513242918.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:18.641Z,1513242918.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:18.695Z,1513242918.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:19.046Z,1513242919.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:19.067Z,1513242919.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:19.450Z,1513242919.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:19.465Z,1513242919.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:19.834Z,1513242919.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:19.855Z,1513242919.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:20.234Z,1513242920.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:20.267Z,1513242920.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:20.646Z,1513242920.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:20.661Z,1513242920.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:21.037Z,1513242921.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:21.060Z,1513242921.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:21.449Z,1513242921.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:21.471Z,1513242921.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:21.856Z,1513242921.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:21.870Z,1513242921.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:22.255Z,1513242922.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:22.270Z,1513242922.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:22.653Z,1513242922.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:22.668Z,1513242922.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:23.032Z,1513242923.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:23.067Z,1513242923.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:23.444Z,1513242923.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:23.459Z,1513242923.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:23.841Z,1513242923.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:23.856Z,1513242923.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:24.236Z,1513242924.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:24.263Z,1513242924.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:24.652Z,1513242924.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:24.667Z,1513242924.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:25.054Z,1513242925.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:25.107Z,1513242925.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:25.456Z,1513242925.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:25.479Z,1513242925.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:25.835Z,1513242925.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:25.867Z,1513242925.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:26.231Z,1513242926.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:26.267Z,1513242926.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:26.632Z,1513242926.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:26.669Z,1513242926.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:27.032Z,1513242927.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:27.059Z,1513242927.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:27.446Z,1513242927.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:27.479Z,1513242927.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:27.860Z,1513242927.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:27.875Z,1513242927.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:28.270Z,1513242928.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:28.313Z,1513242928.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:28.651Z,1513242928.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:28.676Z,1513242928.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:29.038Z,1513242929.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:29.071Z,1513242929.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:29.430Z,1513242929.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:29.445Z,1513242929.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:29.841Z,1513242929.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:29.868Z,1513242929.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:30.236Z,1513242930.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:30.251Z,1513242930.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:30.646Z,1513242930.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:30.667Z,1513242930.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:31.050Z,1513242931.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:31.065Z,1513242931.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:31.457Z,1513242931.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:31.472Z,1513242931.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:31.831Z,1513242931.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:31.863Z,1513242931.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:32.232Z,1513242932.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:32.247Z,1513242932.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:32.632Z,1513242932.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:32.647Z,1513242932.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:33.037Z,1513242933.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:33.056Z,1513242933.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:33.456Z,1513242933.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:33.472Z,1513242933.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:33.851Z,1513242933.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:33.883Z,1513242933.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:34.246Z,1513242934.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:34.279Z,1513242934.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:34.655Z,1513242934.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:34.687Z,1513242934.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:35.031Z,1513242935.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:35.075Z,1513242935.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:35.431Z,1513242935.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:35.467Z,1513242935.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:35.840Z,1513242935.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:35.904Z,1513242935.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:36.240Z,1513242936.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:36.255Z,1513242936.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:36.646Z,1513242936.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:36.684Z,1513242936.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:37.045Z,1513242937.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:37.114Z,1513242937.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:37.446Z,1513242937.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:37.460Z,1513242937.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:37.843Z,1513242937.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:37.859Z,1513242937.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:38.245Z,1513242938.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:38.288Z,1513242938.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:38.642Z,1513242938.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:38.657Z,1513242938.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:39.039Z,1513242939.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:39.103Z,1513242939.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:39.444Z,1513242939.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:39.458Z,1513242939.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:39.846Z,1513242939.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:39.860Z,1513242939.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:40.245Z,1513242940.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:40.260Z,1513242940.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:40.641Z,1513242940.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:40.663Z,1513242940.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:41.085Z,1513242941.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:41.104Z,1513242941.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:41.428Z,1513242941.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:41.459Z,1513242941.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:41.835Z,1513242941.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:41.861Z,1513242941.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:42.232Z,1513242942.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:42.259Z,1513242942.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:42.655Z,1513242942.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:42.670Z,1513242942.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:43.058Z,1513242943.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:43.072Z,1513242943.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:43.458Z,1513242943.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:43.474Z,1513242943.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:43.828Z,1513242943.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:43.862Z,1513242943.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:44.251Z,1513242944.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:44.306Z,1513242944.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:44.632Z,1513242944.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:44.663Z,1513242944.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:45.032Z,1513242945.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:45.058Z,1513242945.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:45.449Z,1513242945.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:45.479Z,1513242945.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:45.858Z,1513242945.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:45.873Z,1513242945.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:46.254Z,1513242946.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:46.268Z,1513242946.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:46.635Z,1513242946.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:46.661Z,1513242946.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:47.032Z,1513242947.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:47.063Z,1513242947.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:47.447Z,1513242947.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:47.515Z,1513242947.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:47.831Z,1513242947.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:47.868Z,1513242947.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:47.871Z,1513242947.871 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:15:47.871Z,1513242947.871 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:15:47.871Z,1513242947.871 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:15:47.871Z,1513242947.871 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:15:48.231Z,1513242948.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:48.259Z,1513242948.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:48.266Z,1513242948.266 [Default:CheckIn:D] Stopped
2017-12-14T09:15:48.266Z,1513242948.266 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:15:48.654Z,1513242948.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:48.673Z,1513242948.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:48.677Z,1513242948.677 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 522.547949 min 
2017-12-14T09:15:48.677Z,1513242948.677 [Default:CheckIn:E] Stopped
2017-12-14T09:15:48.677Z,1513242948.677 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn] Stopped
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn](INFO): Running loop #51
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn] Running Loop=51
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:15:48.678Z,1513242948.678 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:15:49.053Z,1513242949.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:49.078Z,1513242949.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:52.534Z,1513242952.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:52.549Z,1513242952.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:52.648Z,1513242952.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:52.679Z,1513242952.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:53.032Z,1513242953.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:53.051Z,1513242953.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:53.437Z,1513242953.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:53.451Z,1513242953.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:53.835Z,1513242953.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:53.850Z,1513242953.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:54.231Z,1513242954.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:54.251Z,1513242954.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:54.636Z,1513242954.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:54.652Z,1513242954.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:55.038Z,1513242955.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:55.052Z,1513242955.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:55.449Z,1513242955.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:55.464Z,1513242955.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:55.838Z,1513242955.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:55.852Z,1513242955.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:56.237Z,1513242956.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:56.252Z,1513242956.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:56.630Z,1513242956.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:56.651Z,1513242956.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:57.027Z,1513242957.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:57.062Z,1513242957.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:57.443Z,1513242957.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:57.459Z,1513242957.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:57.843Z,1513242957.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:57.862Z,1513242957.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:58.247Z,1513242958.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:58.279Z,1513242958.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:58.623Z,1513242958.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:58.659Z,1513242958.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:59.032Z,1513242959.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:59.059Z,1513242959.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:59.424Z,1513242959.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:59.463Z,1513242959.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:15:59.828Z,1513242959.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:15:59.906Z,1513242959.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:00.270Z,1513242960.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:00.309Z,1513242960.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:00.641Z,1513242960.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:00.710Z,1513242960.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:01.045Z,1513242961.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:01.076Z,1513242961.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:01.439Z,1513242961.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:01.494Z,1513242961.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:01.835Z,1513242961.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:01.850Z,1513242961.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:02.235Z,1513242962.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:02.249Z,1513242962.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:02.631Z,1513242962.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:02.658Z,1513242962.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:03.034Z,1513242963.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:03.088Z,1513242963.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:03.463Z,1513242963.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:03.494Z,1513242963.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:03.846Z,1513242963.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:03.867Z,1513242963.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:04.249Z,1513242964.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:04.264Z,1513242964.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:04.623Z,1513242964.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:04.650Z,1513242964.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:05.023Z,1513242965.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:05.055Z,1513242965.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:05.427Z,1513242965.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:05.452Z,1513242965.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:05.827Z,1513242965.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:05.853Z,1513242965.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:06.232Z,1513242966.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:06.259Z,1513242966.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:06.669Z,1513242966.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:06.708Z,1513242966.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:07.045Z,1513242967.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:07.060Z,1513242967.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:07.437Z,1513242967.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:07.460Z,1513242967.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:07.827Z,1513242967.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:07.867Z,1513242967.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:08.225Z,1513242968.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:08.240Z,1513242968.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:08.632Z,1513242968.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:08.656Z,1513242968.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:09.033Z,1513242969.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:09.047Z,1513242969.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:09.439Z,1513242969.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:09.459Z,1513242969.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:09.878Z,1513242969.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:09.953Z,1513242969.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:10.238Z,1513242970.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:10.254Z,1513242970.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:10.632Z,1513242970.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:10.647Z,1513242970.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:11.034Z,1513242971.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:11.050Z,1513242971.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:11.432Z,1513242971.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:11.446Z,1513242971.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:11.837Z,1513242971.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:11.852Z,1513242971.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:12.232Z,1513242972.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:12.246Z,1513242972.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:12.638Z,1513242972.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:12.659Z,1513242972.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:13.058Z,1513242973.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:13.098Z,1513242973.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:13.440Z,1513242973.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:13.459Z,1513242973.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:13.836Z,1513242973.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:13.850Z,1513242973.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:14.231Z,1513242974.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:14.246Z,1513242974.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:14.633Z,1513242974.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:14.648Z,1513242974.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:15.039Z,1513242975.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:15.099Z,1513242975.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:15.446Z,1513242975.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:15.467Z,1513242975.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:15.849Z,1513242975.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:15.863Z,1513242975.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:16.262Z,1513242976.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:16.297Z,1513242976.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:16.628Z,1513242976.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:16.647Z,1513242976.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:17.032Z,1513242977.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:17.051Z,1513242977.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:17.437Z,1513242977.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:17.451Z,1513242977.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:17.836Z,1513242977.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:17.855Z,1513242977.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:18.234Z,1513242978.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:18.249Z,1513242978.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:18.637Z,1513242978.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:18.660Z,1513242978.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:19.037Z,1513242979.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:19.052Z,1513242979.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:19.461Z,1513242979.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:19.500Z,1513242979.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:19.843Z,1513242979.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:19.857Z,1513242979.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:20.223Z,1513242980.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:20.267Z,1513242980.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:20.626Z,1513242980.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:20.689Z,1513242980.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:21.025Z,1513242981.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:21.068Z,1513242981.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:21.436Z,1513242981.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:21.466Z,1513242981.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:21.839Z,1513242981.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:21.915Z,1513242981.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:22.235Z,1513242982.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:22.333Z,1513242982.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:22.626Z,1513242982.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:22.670Z,1513242982.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:23.034Z,1513242983.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:23.055Z,1513242983.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:23.424Z,1513242983.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:23.510Z,1513242983.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:23.834Z,1513242983.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:23.863Z,1513242983.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:24.224Z,1513242984.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:24.306Z,1513242984.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:24.635Z,1513242984.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:24.677Z,1513242984.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:25.053Z,1513242985.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:25.080Z,1513242985.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:25.436Z,1513242985.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:25.510Z,1513242985.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:25.835Z,1513242985.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:25.875Z,1513242985.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:26.225Z,1513242986.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:26.239Z,1513242986.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:26.673Z,1513242986.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:26.692Z,1513242986.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:27.033Z,1513242987.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:27.048Z,1513242987.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:27.441Z,1513242987.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:27.472Z,1513242987.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:27.865Z,1513242987.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:27.879Z,1513242987.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:28.279Z,1513242988.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:28.294Z,1513242988.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:28.620Z,1513242988.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:28.667Z,1513242988.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:29.023Z,1513242989.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:29.048Z,1513242989.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:29.423Z,1513242989.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:29.455Z,1513242989.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:29.845Z,1513242989.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:29.860Z,1513242989.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:30.257Z,1513242990.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:30.279Z,1513242990.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:30.648Z,1513242990.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:30.667Z,1513242990.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:31.048Z,1513242991.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:31.075Z,1513242991.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:31.435Z,1513242991.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:31.490Z,1513242991.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:31.826Z,1513242991.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:31.879Z,1513242991.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:32.225Z,1513242992.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:32.272Z,1513242992.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:32.631Z,1513242992.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:32.693Z,1513242992.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:33.034Z,1513242993.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:33.080Z,1513242993.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:33.440Z,1513242993.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:33.479Z,1513242993.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:33.869Z,1513242993.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:33.884Z,1513242993.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:34.261Z,1513242994.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:34.308Z,1513242994.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:34.631Z,1513242994.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:34.663Z,1513242994.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:35.037Z,1513242995.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:35.067Z,1513242995.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:35.460Z,1513242995.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:35.492Z,1513242995.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:35.846Z,1513242995.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:35.898Z,1513242995.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:36.234Z,1513242996.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:36.279Z,1513242996.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:36.640Z,1513242996.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:36.660Z,1513242996.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:37.040Z,1513242997.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:37.064Z,1513242997.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:37.447Z,1513242997.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:37.468Z,1513242997.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:37.826Z,1513242997.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:37.863Z,1513242997.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:38.226Z,1513242998.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:38.269Z,1513242998.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:38.627Z,1513242998.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:38.686Z,1513242998.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:39.027Z,1513242999.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:39.088Z,1513242999.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:39.437Z,1513242999.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:39.476Z,1513242999.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:39.840Z,1513242999.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:39.890Z,1513242999.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:40.267Z,1513243000.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:40.291Z,1513243000.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:40.635Z,1513243000.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:40.655Z,1513243000.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:41.034Z,1513243001.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:41.063Z,1513243001.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:41.457Z,1513243001.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:41.505Z,1513243001.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:41.826Z,1513243001.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:41.871Z,1513243001.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:42.224Z,1513243002.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:42.277Z,1513243002.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:42.649Z,1513243002.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:42.673Z,1513243002.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:43.048Z,1513243003.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:43.131Z,1513243003.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:43.448Z,1513243003.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:43.487Z,1513243003.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:43.833Z,1513243003.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:43.870Z,1513243003.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:44.225Z,1513243004.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:44.269Z,1513243004.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:44.631Z,1513243004.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:44.792Z,1513243004.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:45.031Z,1513243005.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:45.058Z,1513243005.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:45.455Z,1513243005.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:45.503Z,1513243005.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:45.859Z,1513243005.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:45.873Z,1513243005.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:46.253Z,1513243006.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:46.314Z,1513243006.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:46.624Z,1513243006.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:46.659Z,1513243006.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:47.024Z,1513243007.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:47.047Z,1513243007.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:47.424Z,1513243007.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:47.439Z,1513243007.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:47.824Z,1513243007.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:47.863Z,1513243007.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:48.231Z,1513243008.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:48.246Z,1513243008.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:48.639Z,1513243008.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:48.682Z,1513243008.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:49.046Z,1513243009.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:49.067Z,1513243009.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:49.446Z,1513243009.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:49.462Z,1513243009.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:53.032Z,1513243013.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:53.047Z,1513243013.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:53.155Z,1513243013.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:53.176Z,1513243013.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:53.526Z,1513243013.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:53.551Z,1513243013.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:53.922Z,1513243013.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:53.946Z,1513243013.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:54.308Z,1513243014.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:54.360Z,1513243014.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:54.710Z,1513243014.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:54.751Z,1513243014.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:55.125Z,1513243015.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:55.168Z,1513243015.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:55.511Z,1513243015.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:55.540Z,1513243015.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:55.907Z,1513243015.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:55.923Z,1513243015.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:56.305Z,1513243016.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:56.339Z,1513243016.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:56.709Z,1513243016.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:56.736Z,1513243016.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:57.133Z,1513243017.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:57.149Z,1513243017.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:57.524Z,1513243017.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:57.539Z,1513243017.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:57.892Z,1513243017.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:57.937Z,1513243017.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:58.335Z,1513243018.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:58.376Z,1513243018.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:58.696Z,1513243018.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:58.735Z,1513243018.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:59.106Z,1513243019.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:59.133Z,1513243019.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:59.517Z,1513243019.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:59.539Z,1513243019.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:16:59.927Z,1513243019.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:16:59.942Z,1513243019.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:00.327Z,1513243020.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:00.342Z,1513243020.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:00.709Z,1513243020.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:00.731Z,1513243020.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:01.116Z,1513243021.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:01.139Z,1513243021.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:01.547Z,1513243021.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:01.579Z,1513243021.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:01.896Z,1513243021.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:01.929Z,1513243021.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:02.325Z,1513243022.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:02.339Z,1513243022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:02.714Z,1513243022.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:02.763Z,1513243022.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:03.119Z,1513243023.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:03.127Z,1513243023.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x58837 got:0x52395
2017-12-14T09:17:03.165Z,1513243023.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:03.495Z,1513243023.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:03.536Z,1513243023.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:03.923Z,1513243023.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:03.938Z,1513243023.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:04.296Z,1513243024.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:04.339Z,1513243024.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:04.771Z,1513243024.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:04.820Z,1513243024.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:05.118Z,1513243025.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:05.136Z,1513243025.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:05.525Z,1513243025.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:05.548Z,1513243025.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:05.896Z,1513243025.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:05.934Z,1513243025.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:06.298Z,1513243026.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:06.371Z,1513243026.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:06.696Z,1513243026.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:06.718Z,1513243026.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:07.101Z,1513243027.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:07.147Z,1513243027.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:07.506Z,1513243027.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:07.543Z,1513243027.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:07.924Z,1513243027.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:07.982Z,1513243027.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:08.313Z,1513243028.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:08.327Z,1513243028.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:08.697Z,1513243028.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:08.714Z,1513243028.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:09.186Z,1513243029.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:09.238Z,1513243029.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:09.495Z,1513243029.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:09.528Z,1513243029.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:09.896Z,1513243029.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:09.937Z,1513243029.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:10.300Z,1513243030.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:10.325Z,1513243030.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:10.716Z,1513243030.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:10.741Z,1513243030.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:11.141Z,1513243031.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:11.172Z,1513243031.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:11.518Z,1513243031.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:11.547Z,1513243031.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:11.904Z,1513243031.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:11.946Z,1513243031.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:12.296Z,1513243032.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:12.349Z,1513243032.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:12.702Z,1513243032.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:12.740Z,1513243032.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:13.095Z,1513243033.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:13.128Z,1513243033.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:13.521Z,1513243033.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:13.536Z,1513243033.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:13.937Z,1513243033.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:13.975Z,1513243033.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:14.364Z,1513243034.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:14.442Z,1513243034.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:14.703Z,1513243034.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:14.727Z,1513243034.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:15.106Z,1513243035.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:15.125Z,1513243035.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:15.506Z,1513243035.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:15.547Z,1513243035.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:15.900Z,1513243035.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:15.922Z,1513243035.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:16.307Z,1513243036.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:16.352Z,1513243036.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:16.716Z,1513243036.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:16.735Z,1513243036.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:17.114Z,1513243037.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:17.147Z,1513243037.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:17.518Z,1513243037.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:17.533Z,1513243037.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:17.895Z,1513243037.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:17.939Z,1513243037.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:18.303Z,1513243038.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:18.335Z,1513243038.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:18.696Z,1513243038.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:18.733Z,1513243038.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:19.099Z,1513243039.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:19.139Z,1513243039.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:19.520Z,1513243039.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:19.537Z,1513243039.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:19.920Z,1513243039.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:19.934Z,1513243039.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:20.327Z,1513243040.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:20.344Z,1513243040.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:20.722Z,1513243040.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:20.758Z,1513243040.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:21.110Z,1513243041.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:21.141Z,1513243041.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:21.508Z,1513243041.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:21.524Z,1513243041.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:21.524Z,1513243041.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175
2017-12-14T09:17:21.524Z,1513243041.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:17:21.542Z,1513243041.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:21.542Z,1513243041.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 175
2017-12-14T09:17:21.542Z,1513243041.542 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:17:21.544Z,1513243041.544 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:21.544Z,1513243041.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175
2017-12-14T09:17:21.544Z,1513243041.544 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:17:21.569Z,1513243041.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:17:21.569Z,1513243041.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:17:21.569Z,1513243041.569 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:17:21.904Z,1513243041.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:21.953Z,1513243041.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:17:21.953Z,1513243041.953 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175
2017-12-14T09:17:21.954Z,1513243041.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:17:21.954Z,1513243041.954 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 175
2017-12-14T09:17:21.954Z,1513243041.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:17:21.954Z,1513243041.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175
2017-12-14T09:17:22.302Z,1513243042.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:22.331Z,1513243042.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:17:22.331Z,1513243042.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:17:22.332Z,1513243042.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:17:22.332Z,1513243042.332 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:17:22.342Z,1513243042.342 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:17:22.342Z,1513243042.342 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:17:22.342Z,1513243042.342 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:17:22.343Z,1513243042.343 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:17:22.343Z,1513243042.343 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:17:22.713Z,1513243042.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:22.728Z,1513243042.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:23.114Z,1513243043.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:23.139Z,1513243043.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:23.515Z,1513243043.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:23.558Z,1513243043.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:23.930Z,1513243043.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:23.937Z,1513243043.937 [PNI_TCM](ERROR): CRC does not match. Expected:0x43097 got:0x1858
2017-12-14T09:17:23.975Z,1513243043.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:24.295Z,1513243044.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:24.331Z,1513243044.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:24.713Z,1513243044.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:24.728Z,1513243044.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:25.096Z,1513243045.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:25.138Z,1513243045.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:25.527Z,1513243045.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:25.550Z,1513243045.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:25.928Z,1513243045.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:25.944Z,1513243045.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:26.326Z,1513243046.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:26.342Z,1513243046.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:26.695Z,1513243046.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:26.736Z,1513243046.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:27.128Z,1513243047.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:27.160Z,1513243047.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:27.495Z,1513243047.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:27.531Z,1513243047.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:27.915Z,1513243047.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:27.930Z,1513243047.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:28.295Z,1513243048.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:28.435Z,1513243048.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:28.722Z,1513243048.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:28.746Z,1513243048.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:29.124Z,1513243049.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:29.179Z,1513243049.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:29.523Z,1513243049.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:29.539Z,1513243049.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:29.893Z,1513243049.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:29.951Z,1513243049.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:30.336Z,1513243050.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:30.367Z,1513243050.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:30.696Z,1513243050.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:30.737Z,1513243050.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:31.107Z,1513243051.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:31.128Z,1513243051.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:31.522Z,1513243051.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:31.542Z,1513243051.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:31.928Z,1513243051.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:31.964Z,1513243051.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:32.314Z,1513243052.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:32.340Z,1513243052.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:32.701Z,1513243052.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:32.729Z,1513243052.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:33.095Z,1513243053.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:33.135Z,1513243053.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:33.499Z,1513243053.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:33.533Z,1513243053.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:33.896Z,1513243053.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:33.932Z,1513243053.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:34.300Z,1513243054.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:34.336Z,1513243054.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:34.726Z,1513243054.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:34.744Z,1513243054.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:35.140Z,1513243055.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:35.156Z,1513243055.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:35.522Z,1513243055.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:35.540Z,1513243055.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:35.889Z,1513243055.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:35.934Z,1513243055.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:36.295Z,1513243056.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:36.342Z,1513243056.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:36.754Z,1513243056.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:36.805Z,1513243056.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:37.103Z,1513243057.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:37.130Z,1513243057.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:37.511Z,1513243057.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:37.548Z,1513243057.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:37.928Z,1513243057.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:37.996Z,1513243057.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:38.329Z,1513243058.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:38.344Z,1513243058.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:38.707Z,1513243058.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:38.737Z,1513243058.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:39.110Z,1513243059.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:39.145Z,1513243059.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:39.503Z,1513243059.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:39.550Z,1513243059.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:39.919Z,1513243059.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:39.954Z,1513243059.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:40.310Z,1513243060.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:40.343Z,1513243060.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:40.714Z,1513243060.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:40.737Z,1513243060.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:41.078Z,1513243061.078 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T09:17:41.078Z,1513243061.078 [NAL9602] Data Fault, FailCount= 3
2017-12-14T09:17:41.079Z,1513243061.079 [NAL9602](ERROR): Data Fault
2017-12-14T09:17:41.099Z,1513243061.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:41.139Z,1513243061.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:41.169Z,1513243061.169 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T09:17:41.482Z,1513243061.482 [NAL9602](INFO): Powering down
2017-12-14T09:17:41.514Z,1513243061.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:41.540Z,1513243061.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:41.914Z,1513243061.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:41.928Z,1513243061.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:42.312Z,1513243062.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:42.327Z,1513243062.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:42.341Z,1513243062.341 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T09:17:42.342Z,1513243062.342 [NAL9602] No Fault, FailCount= 3
2017-12-14T09:17:42.701Z,1513243062.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:42.733Z,1513243062.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:43.130Z,1513243063.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:43.178Z,1513243063.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:43.508Z,1513243063.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:43.523Z,1513243063.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:43.908Z,1513243063.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:43.970Z,1513243063.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:44.299Z,1513243064.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:44.349Z,1513243064.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:44.705Z,1513243064.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:44.728Z,1513243064.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:45.110Z,1513243065.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:45.124Z,1513243065.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:45.508Z,1513243065.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:45.527Z,1513243065.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:45.903Z,1513243065.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:45.948Z,1513243065.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:46.352Z,1513243066.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:46.400Z,1513243066.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:46.694Z,1513243066.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:46.727Z,1513243066.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:47.111Z,1513243067.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:47.131Z,1513243067.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:47.494Z,1513243067.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:47.535Z,1513243067.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:47.907Z,1513243067.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:47.929Z,1513243067.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:48.295Z,1513243068.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:48.336Z,1513243068.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:48.705Z,1513243068.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:48.730Z,1513243068.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:49.094Z,1513243069.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:49.136Z,1513243069.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:49.507Z,1513243069.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:49.594Z,1513243069.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:52.941Z,1513243072.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:53.031Z,1513243073.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:53.134Z,1513243073.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:53.157Z,1513243073.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:53.524Z,1513243073.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:53.563Z,1513243073.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:53.903Z,1513243073.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:53.943Z,1513243073.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:54.307Z,1513243074.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:54.377Z,1513243074.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:54.711Z,1513243074.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:54.736Z,1513243074.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:55.122Z,1513243075.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:55.144Z,1513243075.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:55.512Z,1513243075.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:55.558Z,1513243075.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:55.919Z,1513243075.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:55.926Z,1513243075.926 [PNI_TCM](ERROR): CRC does not match. Expected:0x35047 got:0x6336
2017-12-14T09:17:55.958Z,1513243075.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:56.320Z,1513243076.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:56.335Z,1513243076.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:56.722Z,1513243076.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:56.753Z,1513243076.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:57.112Z,1513243077.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:57.142Z,1513243077.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:57.519Z,1513243077.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:57.533Z,1513243077.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:57.923Z,1513243077.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:57.947Z,1513243077.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:58.323Z,1513243078.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:58.338Z,1513243078.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:58.715Z,1513243078.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:58.738Z,1513243078.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:59.127Z,1513243079.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:59.142Z,1513243079.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:59.520Z,1513243079.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:59.539Z,1513243079.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:17:59.917Z,1513243079.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:17:59.939Z,1513243079.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:00.323Z,1513243080.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:00.342Z,1513243080.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:00.721Z,1513243080.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:00.768Z,1513243080.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:01.121Z,1513243081.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:01.152Z,1513243081.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:01.520Z,1513243081.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:01.552Z,1513243081.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:01.921Z,1513243081.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:01.951Z,1513243081.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:02.353Z,1513243082.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:02.473Z,1513243082.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:02.717Z,1513243082.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:02.748Z,1513243082.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:03.118Z,1513243083.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:03.134Z,1513243083.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:03.521Z,1513243083.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:03.541Z,1513243083.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:03.925Z,1513243083.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:03.941Z,1513243083.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:04.326Z,1513243084.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:04.340Z,1513243084.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:04.721Z,1513243084.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:04.735Z,1513243084.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:05.114Z,1513243085.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:05.143Z,1513243085.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:05.523Z,1513243085.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:05.538Z,1513243085.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:05.912Z,1513243085.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:05.941Z,1513243085.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:06.324Z,1513243086.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:06.343Z,1513243086.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:06.708Z,1513243086.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:06.741Z,1513243086.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:07.107Z,1513243087.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:07.141Z,1513243087.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:07.510Z,1513243087.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:07.534Z,1513243087.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:07.914Z,1513243087.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:07.950Z,1513243087.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:08.311Z,1513243088.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:08.346Z,1513243088.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:08.701Z,1513243088.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:08.723Z,1513243088.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:09.123Z,1513243089.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:09.159Z,1513243089.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:09.518Z,1513243089.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:09.540Z,1513243089.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:09.920Z,1513243089.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:09.943Z,1513243089.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:10.326Z,1513243090.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:10.343Z,1513243090.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:10.712Z,1513243090.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:10.747Z,1513243090.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:11.128Z,1513243091.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:11.144Z,1513243091.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:11.491Z,1513243091.491 [NAL9602](INFO): Powering up NAL9602
2017-12-14T09:18:11.509Z,1513243091.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:11.551Z,1513243091.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:11.914Z,1513243091.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:11.946Z,1513243091.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:12.310Z,1513243092.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:12.343Z,1513243092.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:12.712Z,1513243092.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:12.742Z,1513243092.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:13.106Z,1513243093.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:13.152Z,1513243093.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:13.514Z,1513243093.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:13.545Z,1513243093.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:13.911Z,1513243093.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:13.947Z,1513243093.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:14.314Z,1513243094.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:14.476Z,1513243094.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:14.714Z,1513243094.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:14.763Z,1513243094.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:15.134Z,1513243095.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:15.150Z,1513243095.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x56612 got:0x16897
2017-12-14T09:18:15.210Z,1513243095.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:15.519Z,1513243095.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:15.539Z,1513243095.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:15.918Z,1513243095.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:15.972Z,1513243095.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:16.316Z,1513243096.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:16.338Z,1513243096.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:16.721Z,1513243096.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:16.744Z,1513243096.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:17.118Z,1513243097.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:17.133Z,1513243097.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:17.523Z,1513243097.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:17.537Z,1513243097.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:17.904Z,1513243097.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:17.935Z,1513243097.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:18.352Z,1513243098.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:18.380Z,1513243098.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:18.721Z,1513243098.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:18.747Z,1513243098.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:19.119Z,1513243099.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:19.134Z,1513243099.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:19.510Z,1513243099.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:19.562Z,1513243099.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:19.921Z,1513243099.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:19.928Z,1513243099.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x13209 got:0x47649
2017-12-14T09:18:19.948Z,1513243099.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:20.320Z,1513243100.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:20.334Z,1513243100.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:20.719Z,1513243100.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:20.734Z,1513243100.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:21.133Z,1513243101.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:21.161Z,1513243101.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:21.513Z,1513243101.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:21.543Z,1513243101.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:21.930Z,1513243101.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:21.946Z,1513243101.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:22.295Z,1513243102.295 [NAL9602](INFO): NAL9602 initialized
2017-12-14T09:18:22.314Z,1513243102.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:22.341Z,1513243102.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:22.707Z,1513243102.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:22.788Z,1513243102.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:23.130Z,1513243103.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:23.145Z,1513243103.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:23.586Z,1513243103.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:23.621Z,1513243103.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:23.919Z,1513243103.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:23.934Z,1513243103.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:24.323Z,1513243104.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:24.375Z,1513243104.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:24.719Z,1513243104.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:24.748Z,1513243104.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:25.146Z,1513243105.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:25.161Z,1513243105.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:25.537Z,1513243105.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:25.552Z,1513243105.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:25.937Z,1513243105.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:25.952Z,1513243105.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:26.315Z,1513243106.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:26.342Z,1513243106.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:26.715Z,1513243106.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:26.730Z,1513243106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:27.119Z,1513243107.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:27.148Z,1513243107.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:27.522Z,1513243107.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:27.540Z,1513243107.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:27.952Z,1513243107.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:27.980Z,1513243107.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:28.331Z,1513243108.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:28.346Z,1513243108.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:28.725Z,1513243108.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:28.747Z,1513243108.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:29.122Z,1513243109.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:29.143Z,1513243109.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:29.522Z,1513243109.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:29.536Z,1513243109.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:29.923Z,1513243109.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:29.947Z,1513243109.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:30.319Z,1513243110.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:30.334Z,1513243110.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:30.725Z,1513243110.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:30.742Z,1513243110.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:31.160Z,1513243111.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:31.198Z,1513243111.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:31.530Z,1513243111.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:31.546Z,1513243111.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:31.930Z,1513243111.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:31.944Z,1513243111.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:32.325Z,1513243112.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:32.342Z,1513243112.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:32.723Z,1513243112.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:32.738Z,1513243112.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:33.128Z,1513243113.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:33.143Z,1513243113.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:33.522Z,1513243113.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:33.536Z,1513243113.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:33.930Z,1513243113.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:33.946Z,1513243113.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:34.342Z,1513243114.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:34.363Z,1513243114.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:34.733Z,1513243114.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:34.826Z,1513243114.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:35.123Z,1513243115.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:35.138Z,1513243115.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:35.525Z,1513243115.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:35.543Z,1513243115.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:35.927Z,1513243115.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:35.942Z,1513243115.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:36.327Z,1513243116.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:36.394Z,1513243116.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:36.724Z,1513243116.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:36.834Z,1513243116.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:37.142Z,1513243117.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:37.163Z,1513243117.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:37.579Z,1513243117.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:37.641Z,1513243117.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:37.937Z,1513243117.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:37.959Z,1513243117.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:38.323Z,1513243118.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:38.363Z,1513243118.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:38.722Z,1513243118.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:38.752Z,1513243118.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:39.122Z,1513243119.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:39.146Z,1513243119.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:39.520Z,1513243119.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:39.534Z,1513243119.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:39.924Z,1513243119.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:39.938Z,1513243119.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:40.328Z,1513243120.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:40.343Z,1513243120.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:40.742Z,1513243120.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:40.775Z,1513243120.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:41.121Z,1513243121.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:41.136Z,1513243121.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:41.521Z,1513243121.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:41.537Z,1513243121.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:41.916Z,1513243121.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:41.938Z,1513243121.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:42.329Z,1513243122.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:42.344Z,1513243122.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:42.720Z,1513243122.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:42.736Z,1513243122.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:43.126Z,1513243123.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:43.140Z,1513243123.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:43.530Z,1513243123.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:43.545Z,1513243123.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:43.958Z,1513243123.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:43.982Z,1513243123.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:44.327Z,1513243124.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:44.342Z,1513243124.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:44.721Z,1513243124.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:44.736Z,1513243124.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:45.124Z,1513243125.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:45.155Z,1513243125.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:45.526Z,1513243125.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:45.540Z,1513243125.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:45.940Z,1513243125.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:45.979Z,1513243125.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:46.333Z,1513243126.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:46.359Z,1513243126.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:46.719Z,1513243126.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:46.775Z,1513243126.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:47.154Z,1513243127.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:47.186Z,1513243127.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:47.527Z,1513243127.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:47.552Z,1513243127.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:47.924Z,1513243127.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:47.943Z,1513243127.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:48.314Z,1513243128.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:48.347Z,1513243128.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:48.726Z,1513243128.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:48.788Z,1513243128.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:49.126Z,1513243129.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:49.152Z,1513243129.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:49.542Z,1513243129.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:49.558Z,1513243129.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:50.022Z,1513243130.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:50.818Z,1513243130.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:51.221Z,1513243131.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:53.074Z,1513243133.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:53.103Z,1513243133.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:53.216Z,1513243133.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:53.240Z,1513243133.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:53.570Z,1513243133.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:53.606Z,1513243133.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:53.966Z,1513243133.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:53.982Z,1513243133.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:54.366Z,1513243134.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:54.381Z,1513243134.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:54.775Z,1513243134.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:54.796Z,1513243134.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:55.178Z,1513243135.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:55.200Z,1513243135.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:55.571Z,1513243135.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:55.591Z,1513243135.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:55.956Z,1513243135.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:55.986Z,1513243135.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:56.357Z,1513243136.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:56.384Z,1513243136.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:56.763Z,1513243136.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:56.823Z,1513243136.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:57.171Z,1513243137.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:57.187Z,1513243137.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:57.571Z,1513243137.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:57.591Z,1513243137.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:57.973Z,1513243137.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:57.988Z,1513243137.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:58.366Z,1513243138.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:58.381Z,1513243138.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:58.765Z,1513243138.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:58.854Z,1513243138.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:59.165Z,1513243139.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:59.200Z,1513243139.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:59.569Z,1513243139.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:18:59.620Z,1513243139.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:18:59.970Z,1513243139.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:00.010Z,1513243140.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:00.352Z,1513243140.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:00.399Z,1513243140.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:00.768Z,1513243140.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:00.789Z,1513243140.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:01.180Z,1513243141.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:01.203Z,1513243141.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:01.573Z,1513243141.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:01.588Z,1513243141.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:01.956Z,1513243141.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:01.982Z,1513243141.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:02.355Z,1513243142.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:02.387Z,1513243142.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:02.812Z,1513243142.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:02.856Z,1513243142.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:03.183Z,1513243143.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:03.203Z,1513243143.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:03.569Z,1513243143.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:03.596Z,1513243143.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:03.960Z,1513243143.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:03.975Z,1513243143.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:04.026Z,1513243144.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:04.361Z,1513243144.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:04.375Z,1513243144.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:04.817Z,1513243144.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:04.821Z,1513243144.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:04.861Z,1513243144.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:05.173Z,1513243145.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:05.188Z,1513243145.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:05.233Z,1513243145.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:05.576Z,1513243145.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:05.616Z,1513243145.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:05.966Z,1513243145.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:05.982Z,1513243145.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:06.364Z,1513243146.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:06.379Z,1513243146.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:06.794Z,1513243146.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:06.838Z,1513243146.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:07.169Z,1513243147.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:07.192Z,1513243147.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:07.585Z,1513243147.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:07.600Z,1513243147.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:07.957Z,1513243147.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:07.972Z,1513243147.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:08.359Z,1513243148.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:08.422Z,1513243148.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:08.765Z,1513243148.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:08.818Z,1513243148.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:09.196Z,1513243149.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:09.267Z,1513243149.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:09.570Z,1513243149.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:09.606Z,1513243149.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:09.983Z,1513243149.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:10.017Z,1513243150.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:10.363Z,1513243150.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:10.378Z,1513243150.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:10.774Z,1513243150.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:10.789Z,1513243150.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:11.174Z,1513243151.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:11.188Z,1513243151.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:11.579Z,1513243151.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:11.594Z,1513243151.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:11.607Z,1513243151.607 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:19:11.957Z,1513243151.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:11.991Z,1513243151.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:12.359Z,1513243152.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:12.387Z,1513243152.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:12.775Z,1513243152.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:12.791Z,1513243152.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:13.196Z,1513243153.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:13.239Z,1513243153.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:13.561Z,1513243153.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:13.591Z,1513243153.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:13.960Z,1513243153.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:13.987Z,1513243153.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:14.356Z,1513243154.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:14.391Z,1513243154.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:14.761Z,1513243154.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:14.793Z,1513243154.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:15.176Z,1513243155.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:15.191Z,1513243155.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:15.576Z,1513243155.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:15.591Z,1513243155.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:15.964Z,1513243155.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:15.991Z,1513243155.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:16.359Z,1513243156.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:16.394Z,1513243156.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:16.803Z,1513243156.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:16.855Z,1513243156.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:17.178Z,1513243157.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:17.198Z,1513243157.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:17.583Z,1513243157.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:17.598Z,1513243157.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:17.956Z,1513243157.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:17.971Z,1513243157.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:18.369Z,1513243158.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:18.384Z,1513243158.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:18.830Z,1513243158.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:18.861Z,1513243158.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:19.169Z,1513243159.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:19.203Z,1513243159.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:19.619Z,1513243159.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:19.659Z,1513243159.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:19.960Z,1513243159.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:19.975Z,1513243159.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:20.354Z,1513243160.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:20.375Z,1513243160.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:20.760Z,1513243160.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:20.846Z,1513243160.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:21.161Z,1513243161.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:21.177Z,1513243161.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:21.555Z,1513243161.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:21.618Z,1513243161.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:21.970Z,1513243161.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:21.986Z,1513243161.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:22.371Z,1513243162.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:22.472Z,1513243162.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:22.808Z,1513243162.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:22.866Z,1513243162.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:23.151Z,1513243163.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:23.185Z,1513243163.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:23.555Z,1513243163.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:23.581Z,1513243163.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:23.956Z,1513243163.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:23.982Z,1513243163.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:24.351Z,1513243164.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:24.382Z,1513243164.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:24.765Z,1513243164.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:24.802Z,1513243164.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:25.180Z,1513243165.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:25.195Z,1513243165.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:25.562Z,1513243165.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:25.590Z,1513243165.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:25.993Z,1513243165.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:26.007Z,1513243166.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:26.359Z,1513243166.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:26.378Z,1513243166.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:26.810Z,1513243166.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:26.918Z,1513243166.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:27.176Z,1513243167.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:27.195Z,1513243167.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:27.564Z,1513243167.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:27.599Z,1513243167.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:27.952Z,1513243167.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:27.990Z,1513243167.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:28.367Z,1513243168.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:28.381Z,1513243168.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:28.776Z,1513243168.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:28.791Z,1513243168.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:29.204Z,1513243169.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:29.238Z,1513243169.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:29.572Z,1513243169.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:29.594Z,1513243169.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:29.970Z,1513243169.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:29.990Z,1513243169.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:30.352Z,1513243170.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:30.391Z,1513243170.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:30.830Z,1513243170.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:30.894Z,1513243170.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:31.181Z,1513243171.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:31.203Z,1513243171.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:31.581Z,1513243171.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:31.597Z,1513243171.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:31.952Z,1513243171.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:31.991Z,1513243171.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:32.399Z,1513243172.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:32.445Z,1513243172.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:32.808Z,1513243172.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:32.849Z,1513243172.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:33.173Z,1513243173.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:33.206Z,1513243173.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:33.562Z,1513243173.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:33.584Z,1513243173.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:33.953Z,1513243173.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:33.968Z,1513243173.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:34.353Z,1513243174.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:34.367Z,1513243174.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:34.774Z,1513243174.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:34.789Z,1513243174.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:35.183Z,1513243175.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:35.204Z,1513243175.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:35.578Z,1513243175.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:35.606Z,1513243175.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:35.956Z,1513243175.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:35.987Z,1513243175.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:36.367Z,1513243176.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:36.383Z,1513243176.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:36.768Z,1513243176.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:36.787Z,1513243176.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:37.175Z,1513243177.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:37.191Z,1513243177.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:37.575Z,1513243177.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:37.591Z,1513243177.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:37.972Z,1513243177.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:37.986Z,1513243177.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:38.352Z,1513243178.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:38.385Z,1513243178.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:38.834Z,1513243178.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:38.855Z,1513243178.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:39.176Z,1513243179.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:39.191Z,1513243179.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:39.586Z,1513243179.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:39.607Z,1513243179.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:39.957Z,1513243179.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:39.988Z,1513243179.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:40.351Z,1513243180.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:40.386Z,1513243180.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:40.762Z,1513243180.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:40.796Z,1513243180.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:41.182Z,1513243181.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:41.203Z,1513243181.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:41.565Z,1513243181.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:41.599Z,1513243181.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:41.957Z,1513243181.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:42.039Z,1513243182.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:42.356Z,1513243182.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:42.411Z,1513243182.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:42.769Z,1513243182.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:42.827Z,1513243182.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:43.176Z,1513243183.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:43.191Z,1513243183.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:43.571Z,1513243183.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:43.586Z,1513243183.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:43.966Z,1513243183.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:44.019Z,1513243184.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:44.367Z,1513243184.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:44.387Z,1513243184.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:44.815Z,1513243184.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:44.872Z,1513243184.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:45.179Z,1513243185.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:45.206Z,1513243185.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:45.562Z,1513243185.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:45.576Z,1513243185.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:45.960Z,1513243185.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:45.975Z,1513243185.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:46.362Z,1513243186.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:46.376Z,1513243186.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:46.781Z,1513243186.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:46.846Z,1513243186.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:47.172Z,1513243187.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:47.195Z,1513243187.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:47.578Z,1513243187.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:47.599Z,1513243187.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:47.947Z,1513243187.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:47.974Z,1513243187.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:48.379Z,1513243188.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:48.487Z,1513243188.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:48.761Z,1513243188.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:48.784Z,1513243188.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:49.183Z,1513243189.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:49.197Z,1513243189.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:49.584Z,1513243189.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:49.599Z,1513243189.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:53.040Z,1513243193.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:53.095Z,1513243193.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:53.198Z,1513243193.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:53.214Z,1513243193.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:53.569Z,1513243193.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:53.595Z,1513243193.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:53.984Z,1513243193.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:53.999Z,1513243193.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:54.367Z,1513243194.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:54.493Z,1513243194.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:54.789Z,1513243194.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:54.835Z,1513243194.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:55.152Z,1513243195.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:55.186Z,1513243195.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:55.567Z,1513243195.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:55.587Z,1513243195.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:55.975Z,1513243195.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:55.989Z,1513243195.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:56.379Z,1513243196.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:56.393Z,1513243196.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:56.778Z,1513243196.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:56.799Z,1513243196.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:57.167Z,1513243197.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:57.183Z,1513243197.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:57.552Z,1513243197.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:57.578Z,1513243197.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:57.985Z,1513243197.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:58.004Z,1513243198.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:58.363Z,1513243198.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:58.391Z,1513243198.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:58.788Z,1513243198.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:58.867Z,1513243198.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:59.173Z,1513243199.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:59.203Z,1513243199.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:59.577Z,1513243199.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:59.611Z,1513243199.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:19:59.969Z,1513243199.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:19:59.000Z,1513243200.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:00.364Z,1513243200.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:00.378Z,1513243200.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:00.823Z,1513243200.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:00.862Z,1513243200.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:01.208Z,1513243201.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:01.248Z,1513243201.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:01.566Z,1513243201.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:01.598Z,1513243201.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:01.962Z,1513243201.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:01.998Z,1513243201.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:02.359Z,1513243202.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:02.373Z,1513243202.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:02.776Z,1513243202.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:02.791Z,1513243202.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:03.175Z,1513243203.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:03.191Z,1513243203.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:03.581Z,1513243203.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:03.595Z,1513243203.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:03.956Z,1513243203.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:03.983Z,1513243203.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:04.367Z,1513243204.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:04.387Z,1513243204.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:04.772Z,1513243204.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:04.874Z,1513243204.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:05.173Z,1513243205.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:05.188Z,1513243205.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:05.568Z,1513243205.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:05.583Z,1513243205.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:05.966Z,1513243205.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:06.010Z,1513243206.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:06.366Z,1513243206.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:06.382Z,1513243206.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:06.779Z,1513243206.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:06.827Z,1513243206.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:07.175Z,1513243207.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:07.191Z,1513243207.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:07.566Z,1513243207.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:07.597Z,1513243207.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:07.976Z,1513243207.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:08.028Z,1513243208.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:08.357Z,1513243208.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:08.386Z,1513243208.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:08.770Z,1513243208.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:08.794Z,1513243208.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:09.171Z,1513243209.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:09.193Z,1513243209.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:09.569Z,1513243209.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:09.595Z,1513243209.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:09.963Z,1513243209.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:09.994Z,1513243209.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:10.360Z,1513243210.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:10.376Z,1513243210.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:10.766Z,1513243210.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:10.782Z,1513243210.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:11.166Z,1513243211.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:11.183Z,1513243211.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:11.587Z,1513243211.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:11.619Z,1513243211.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:11.962Z,1513243211.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:11.976Z,1513243211.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:12.365Z,1513243212.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:12.380Z,1513243212.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:12.798Z,1513243212.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:12.835Z,1513243212.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:13.169Z,1513243213.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:13.210Z,1513243213.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:13.562Z,1513243213.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:13.599Z,1513243213.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:13.956Z,1513243213.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:13.971Z,1513243213.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:14.359Z,1513243214.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:14.373Z,1513243214.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:14.790Z,1513243214.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:14.868Z,1513243214.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:15.165Z,1513243215.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:15.180Z,1513243215.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:15.565Z,1513243215.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:15.587Z,1513243215.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:15.962Z,1513243215.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:15.977Z,1513243215.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:16.362Z,1513243216.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:16.377Z,1513243216.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:16.771Z,1513243216.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:16.828Z,1513243216.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:17.172Z,1513243217.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:17.202Z,1513243217.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:17.562Z,1513243217.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:17.590Z,1513243217.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:17.964Z,1513243217.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:18.011Z,1513243218.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:18.353Z,1513243218.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:18.384Z,1513243218.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:18.770Z,1513243218.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:18.784Z,1513243218.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:19.172Z,1513243219.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:19.186Z,1513243219.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:19.566Z,1513243219.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:19.595Z,1513243219.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:19.965Z,1513243219.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:19.980Z,1513243219.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:20.385Z,1513243220.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:20.521Z,1513243220.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:20.766Z,1513243220.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:20.793Z,1513243220.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:21.178Z,1513243221.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:21.192Z,1513243221.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:21.576Z,1513243221.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:21.591Z,1513243221.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:21.991Z,1513243221.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:22.009Z,1513243222.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:22.355Z,1513243222.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:22.387Z,1513243222.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:22.388Z,1513243222.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176
2017-12-14T09:20:22.388Z,1513243222.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:20:22.390Z,1513243222.390 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:22.390Z,1513243222.390 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 176
2017-12-14T09:20:22.390Z,1513243222.390 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:20:22.392Z,1513243222.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:22.392Z,1513243222.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176
2017-12-14T09:20:22.392Z,1513243222.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:20:22.491Z,1513243222.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:20:22.491Z,1513243222.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:20:22.492Z,1513243222.492 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:20:22.773Z,1513243222.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:22.807Z,1513243222.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:20:22.807Z,1513243222.807 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176
2017-12-14T09:20:22.808Z,1513243222.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:20:22.808Z,1513243222.808 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 176
2017-12-14T09:20:22.808Z,1513243222.808 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:20:22.808Z,1513243222.808 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176
2017-12-14T09:20:23.174Z,1513243223.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:23.196Z,1513243223.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:20:23.197Z,1513243223.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:20:23.197Z,1513243223.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:20:23.197Z,1513243223.197 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:20:23.198Z,1513243223.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:20:23.198Z,1513243223.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:20:23.198Z,1513243223.198 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:20:23.199Z,1513243223.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:20:23.199Z,1513243223.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:20:23.574Z,1513243223.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:23.603Z,1513243223.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:23.966Z,1513243223.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:23.987Z,1513243223.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:24.363Z,1513243224.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:24.379Z,1513243224.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:24.766Z,1513243224.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:24.782Z,1513243224.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:25.171Z,1513243225.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:25.191Z,1513243225.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:25.571Z,1513243225.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:25.591Z,1513243225.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:25.968Z,1513243225.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:25.983Z,1513243225.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:26.359Z,1513243226.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:26.379Z,1513243226.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:26.808Z,1513243226.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:26.914Z,1513243226.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:27.177Z,1513243227.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:27.239Z,1513243227.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:27.571Z,1513243227.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:27.585Z,1513243227.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:27.963Z,1513243227.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:28.015Z,1513243228.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:28.359Z,1513243228.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:28.379Z,1513243228.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:28.804Z,1513243228.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:28.858Z,1513243228.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:29.174Z,1513243229.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:29.201Z,1513243229.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:29.573Z,1513243229.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:29.605Z,1513243229.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:29.966Z,1513243229.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:29.980Z,1513243229.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:30.360Z,1513243230.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:30.378Z,1513243230.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:30.786Z,1513243230.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:30.801Z,1513243230.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:31.171Z,1513243231.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:31.200Z,1513243231.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:31.566Z,1513243231.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:31.598Z,1513243231.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:31.953Z,1513243231.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:31.987Z,1513243231.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:32.356Z,1513243232.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:32.383Z,1513243232.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:32.766Z,1513243232.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:32.780Z,1513243232.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:33.223Z,1513243233.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:33.255Z,1513243233.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:33.566Z,1513243233.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:33.587Z,1513243233.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:33.962Z,1513243233.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:33.978Z,1513243233.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:34.359Z,1513243234.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:34.374Z,1513243234.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:34.775Z,1513243234.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:34.789Z,1513243234.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:35.179Z,1513243235.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:35.194Z,1513243235.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:35.579Z,1513243235.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:35.599Z,1513243235.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:35.967Z,1513243235.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:35.982Z,1513243235.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:36.364Z,1513243236.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:36.503Z,1513243236.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:36.762Z,1513243236.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:36.789Z,1513243236.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:37.182Z,1513243237.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:37.231Z,1513243237.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:37.579Z,1513243237.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:37.600Z,1513243237.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:37.957Z,1513243237.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:37.986Z,1513243237.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:38.352Z,1513243238.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:38.386Z,1513243238.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:38.775Z,1513243238.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:38.797Z,1513243238.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:39.178Z,1513243239.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:39.192Z,1513243239.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:39.576Z,1513243239.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:39.591Z,1513243239.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:39.698Z,1513243239.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:39.959Z,1513243239.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:39.973Z,1513243239.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:40.365Z,1513243240.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:40.380Z,1513243240.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:40.493Z,1513243240.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:40.823Z,1513243240.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:40.855Z,1513243240.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:41.162Z,1513243241.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:41.191Z,1513243241.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:41.570Z,1513243241.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:41.587Z,1513243241.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:41.970Z,1513243241.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:41.985Z,1513243241.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:42.365Z,1513243242.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:42.380Z,1513243242.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:42.811Z,1513243242.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:42.855Z,1513243242.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:43.165Z,1513243243.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:43.179Z,1513243243.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:43.574Z,1513243243.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:43.604Z,1513243243.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:43.964Z,1513243243.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:43.980Z,1513243243.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:44.361Z,1513243244.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:44.376Z,1513243244.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:44.764Z,1513243244.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:44.788Z,1513243244.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:45.174Z,1513243245.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:45.190Z,1513243245.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:45.575Z,1513243245.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:45.595Z,1513243245.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:45.967Z,1513243245.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:45.983Z,1513243245.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:46.381Z,1513243246.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:46.470Z,1513243246.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:46.785Z,1513243246.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:46.799Z,1513243246.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:47.174Z,1513243247.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:47.203Z,1513243247.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:47.566Z,1513243247.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:47.595Z,1513243247.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:47.952Z,1513243247.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:47.968Z,1513243247.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:48.356Z,1513243248.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:48.392Z,1513243248.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:48.770Z,1513243248.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:48.859Z,1513243248.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:48.867Z,1513243248.867 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:15:48.7Z
2017-12-14T09:20:48.867Z,1513243248.867 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:20:48.867Z,1513243248.867 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:20:49.178Z,1513243249.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:49.204Z,1513243249.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:50.007Z,1513243250.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:50.067Z,1513243250.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:53.276Z,1513243253.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:53.299Z,1513243253.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:53.384Z,1513243253.384 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0204.lzma
2017-12-14T09:20:53.404Z,1513243253.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:53.464Z,1513243253.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:53.766Z,1513243253.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:53.793Z,1513243253.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:54.128Z,1513243254.128 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0204.lzma.bak
2017-12-14T09:20:54.128Z,1513243254.128 [DataOverHttps](INFO): SBD MOMSN=5438388
2017-12-14T09:20:54.192Z,1513243254.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:54.206Z,1513243254.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:55.511Z,1513243255.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:55.531Z,1513243255.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:55.636Z,1513243255.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:55.679Z,1513243255.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:59.114Z,1513243259.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:59.129Z,1513243259.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:59.229Z,1513243259.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:59.256Z,1513243259.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:20:59.629Z,1513243259.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:20:59.654Z,1513243259.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:00.044Z,1513243260.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:00.058Z,1513243260.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:00.490Z,1513243260.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:00.516Z,1513243260.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:00.823Z,1513243260.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:00.901Z,1513243260.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:04.207Z,1513243264.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:04.257Z,1513243264.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:04.340Z,1513243264.340 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0205.lzma
2017-12-14T09:21:04.362Z,1513243264.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:04.377Z,1513243264.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:04.734Z,1513243264.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:04.749Z,1513243264.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:05.086Z,1513243265.086 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0205.lzma.bak
2017-12-14T09:21:05.086Z,1513243265.086 [DataOverHttps](INFO): SBD MOMSN=5438390
2017-12-14T09:21:05.140Z,1513243265.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:05.168Z,1513243265.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:06.327Z,1513243266.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:06.348Z,1513243266.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:06.351Z,1513243266.351 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:21:06.351Z,1513243266.351 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:21:06.351Z,1513243266.351 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:21:06.476Z,1513243266.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:06.543Z,1513243266.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:09.830Z,1513243269.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:09.844Z,1513243269.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:09.941Z,1513243269.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:09.956Z,1513243269.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:10.311Z,1513243270.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:10.343Z,1513243270.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:10.714Z,1513243270.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:10.818Z,1513243270.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:11.106Z,1513243271.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:11.136Z,1513243271.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:11.512Z,1513243271.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:11.527Z,1513243271.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:11.895Z,1513243271.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:11.927Z,1513243271.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:12.292Z,1513243272.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:12.331Z,1513243272.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:12.701Z,1513243272.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:12.747Z,1513243272.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:13.114Z,1513243273.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:13.136Z,1513243273.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:13.521Z,1513243273.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:13.535Z,1513243273.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:13.913Z,1513243273.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:13.936Z,1513243273.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:14.291Z,1513243274.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:14.339Z,1513243274.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:14.691Z,1513243274.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:14.729Z,1513243274.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:15.096Z,1513243275.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:15.103Z,1513243275.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x53895 got:0x20761
2017-12-14T09:21:15.135Z,1513243275.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:15.497Z,1513243275.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:15.542Z,1513243275.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:15.930Z,1513243275.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:15.983Z,1513243275.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:16.315Z,1513243276.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:16.359Z,1513243276.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:16.709Z,1513243276.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:16.749Z,1513243276.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:17.092Z,1513243277.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:17.168Z,1513243277.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:17.493Z,1513243277.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:17.533Z,1513243277.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:17.892Z,1513243277.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:17.939Z,1513243277.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:18.300Z,1513243278.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:18.328Z,1513243278.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:18.696Z,1513243278.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:18.784Z,1513243278.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:19.120Z,1513243279.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:19.149Z,1513243279.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:19.516Z,1513243279.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:19.551Z,1513243279.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:19.914Z,1513243279.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:19.952Z,1513243279.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:20.311Z,1513243280.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:20.351Z,1513243280.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:20.702Z,1513243280.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:20.719Z,1513243280.719 [PNI_TCM](ERROR): CRC does not match. Expected:0x41306 got:0x7022
2017-12-14T09:21:20.762Z,1513243280.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:21.106Z,1513243281.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:21.152Z,1513243281.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:21.516Z,1513243281.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:21.556Z,1513243281.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:21.903Z,1513243281.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:21.973Z,1513243281.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:22.318Z,1513243282.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:22.336Z,1513243282.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:22.709Z,1513243282.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:22.735Z,1513243282.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:23.099Z,1513243283.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:23.131Z,1513243283.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:23.500Z,1513243283.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:23.544Z,1513243283.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:23.885Z,1513243283.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:24.029Z,1513243284.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:24.305Z,1513243284.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:24.322Z,1513243284.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:24.706Z,1513243284.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:24.720Z,1513243284.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:25.112Z,1513243285.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:25.143Z,1513243285.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:25.521Z,1513243285.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:25.528Z,1513243285.528 [PNI_TCM](ERROR): CRC does not match. Expected:0x46774 got:0x7233
2017-12-14T09:21:25.567Z,1513243285.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:25.918Z,1513243285.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:25.939Z,1513243285.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:26.296Z,1513243286.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:26.347Z,1513243286.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:26.792Z,1513243286.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:26.824Z,1513243286.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:27.091Z,1513243287.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:27.135Z,1513243287.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:27.503Z,1513243287.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:27.532Z,1513243287.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:27.914Z,1513243287.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:27.939Z,1513243287.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:28.310Z,1513243288.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:28.341Z,1513243288.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:28.714Z,1513243288.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:28.753Z,1513243288.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:29.096Z,1513243289.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:29.118Z,1513243289.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:29.532Z,1513243289.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:29.560Z,1513243289.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:29.890Z,1513243289.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:29.915Z,1513243289.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:30.302Z,1513243290.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:30.457Z,1513243290.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:30.696Z,1513243290.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:30.719Z,1513243290.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:31.113Z,1513243291.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:31.147Z,1513243291.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:31.513Z,1513243291.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:31.557Z,1513243291.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:31.903Z,1513243291.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:31.994Z,1513243291.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:32.307Z,1513243292.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:32.352Z,1513243292.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:32.708Z,1513243292.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:32.732Z,1513243292.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:33.137Z,1513243293.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:33.171Z,1513243293.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:33.492Z,1513243293.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:33.568Z,1513243293.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:33.914Z,1513243293.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:33.946Z,1513243293.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:34.311Z,1513243294.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:34.383Z,1513243294.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:34.719Z,1513243294.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:34.751Z,1513243294.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:35.131Z,1513243295.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:35.147Z,1513243295.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:35.528Z,1513243295.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:35.547Z,1513243295.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:35.903Z,1513243295.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:35.955Z,1513243295.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:36.306Z,1513243296.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:36.363Z,1513243296.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:36.789Z,1513243296.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:36.846Z,1513243296.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:37.111Z,1513243297.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:37.224Z,1513243297.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:37.526Z,1513243297.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:37.541Z,1513243297.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:37.914Z,1513243297.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:37.995Z,1513243297.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:38.301Z,1513243298.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:38.392Z,1513243298.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:38.708Z,1513243298.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:38.715Z,1513243298.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x15364 got:0x56014
2017-12-14T09:21:38.827Z,1513243298.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:39.100Z,1513243299.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:39.127Z,1513243299.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:39.504Z,1513243299.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:39.551Z,1513243299.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:39.903Z,1513243299.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:39.971Z,1513243299.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:40.331Z,1513243300.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:40.353Z,1513243300.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:40.710Z,1513243300.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:40.770Z,1513243300.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:41.099Z,1513243301.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:41.139Z,1513243301.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:41.513Z,1513243301.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:41.574Z,1513243301.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:41.904Z,1513243301.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:41.982Z,1513243301.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:42.307Z,1513243302.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:42.335Z,1513243302.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:42.719Z,1513243302.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:42.769Z,1513243302.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:43.128Z,1513243303.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:43.184Z,1513243303.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:43.525Z,1513243303.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:43.544Z,1513243303.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:43.920Z,1513243303.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:43.943Z,1513243303.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:44.293Z,1513243304.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:44.377Z,1513243304.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:44.704Z,1513243304.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:44.760Z,1513243304.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:45.110Z,1513243305.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:45.134Z,1513243305.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:45.517Z,1513243305.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:45.577Z,1513243305.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:45.912Z,1513243305.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:45.947Z,1513243305.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:46.326Z,1513243306.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:46.378Z,1513243306.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:46.717Z,1513243306.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:46.766Z,1513243306.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:47.107Z,1513243307.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:47.150Z,1513243307.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:47.509Z,1513243307.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:47.556Z,1513243307.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:47.899Z,1513243307.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:47.962Z,1513243307.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:48.318Z,1513243308.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:48.352Z,1513243308.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:48.718Z,1513243308.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:48.751Z,1513243308.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:49.107Z,1513243309.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:49.162Z,1513243309.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:49.539Z,1513243309.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:49.567Z,1513243309.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:49.917Z,1513243309.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:49.960Z,1513243309.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:50.311Z,1513243310.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:50.331Z,1513243310.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:50.702Z,1513243310.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:50.789Z,1513243310.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:51.134Z,1513243311.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:51.153Z,1513243311.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:51.510Z,1513243311.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:51.560Z,1513243311.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:51.932Z,1513243311.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:51.964Z,1513243311.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:52.330Z,1513243312.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:52.382Z,1513243312.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:52.717Z,1513243312.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:52.824Z,1513243312.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:53.140Z,1513243313.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:53.168Z,1513243313.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:53.506Z,1513243313.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:53.538Z,1513243313.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:53.903Z,1513243313.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:53.943Z,1513243313.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:54.299Z,1513243314.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:54.356Z,1513243314.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:54.713Z,1513243314.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:54.728Z,1513243314.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:55.116Z,1513243315.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:55.144Z,1513243315.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:55.511Z,1513243315.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:55.558Z,1513243315.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:55.919Z,1513243315.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:55.925Z,1513243315.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x29210 got:0x42782
2017-12-14T09:21:55.962Z,1513243315.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:56.305Z,1513243316.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:56.325Z,1513243316.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:56.724Z,1513243316.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:56.739Z,1513243316.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:57.092Z,1513243317.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:57.135Z,1513243317.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:57.504Z,1513243317.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:57.527Z,1513243317.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:57.928Z,1513243317.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:57.988Z,1513243317.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:58.323Z,1513243318.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:58.338Z,1513243318.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:58.723Z,1513243318.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:58.740Z,1513243318.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:59.088Z,1513243319.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:59.142Z,1513243319.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:59.508Z,1513243319.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:59.523Z,1513243319.523 [PNI_TCM](ERROR): CRC does not match. Expected:0x15561 got:0x52412
2017-12-14T09:21:59.575Z,1513243319.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:21:59.891Z,1513243319.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:21:59.921Z,1513243319.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:00.302Z,1513243320.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:00.335Z,1513243320.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:00.717Z,1513243320.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:00.733Z,1513243320.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:01.123Z,1513243321.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:01.180Z,1513243321.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:01.510Z,1513243321.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:01.538Z,1513243321.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:01.914Z,1513243321.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:01.938Z,1513243321.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:02.295Z,1513243322.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:02.352Z,1513243322.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:02.691Z,1513243322.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:02.744Z,1513243322.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:03.097Z,1513243323.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:03.104Z,1513243323.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x31508 got:0x21112
2017-12-14T09:22:03.165Z,1513243323.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:03.491Z,1513243323.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:03.535Z,1513243323.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:03.901Z,1513243323.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:03.939Z,1513243323.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:04.313Z,1513243324.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:04.342Z,1513243324.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:04.710Z,1513243324.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:04.736Z,1513243324.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:05.097Z,1513243325.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:05.144Z,1513243325.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:05.496Z,1513243325.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:05.537Z,1513243325.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:05.921Z,1513243325.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:05.999Z,1513243325.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:06.302Z,1513243326.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:06.342Z,1513243326.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:06.697Z,1513243326.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:06.772Z,1513243326.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:07.118Z,1513243327.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:07.138Z,1513243327.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:10.700Z,1513243330.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:10.763Z,1513243330.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:10.878Z,1513243330.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:10.922Z,1513243330.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:11.228Z,1513243331.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:11.289Z,1513243331.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:11.644Z,1513243331.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:11.667Z,1513243331.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:12.027Z,1513243332.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:12.055Z,1513243332.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:12.528Z,1513243332.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:12.563Z,1513243332.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:12.850Z,1513243332.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:12.879Z,1513243332.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:13.256Z,1513243333.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:13.271Z,1513243333.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:13.652Z,1513243333.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:13.671Z,1513243333.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:14.027Z,1513243334.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:14.060Z,1513243334.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:14.487Z,1513243334.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:14.502Z,1513243334.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:14.837Z,1513243334.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:14.860Z,1513243334.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:15.235Z,1513243335.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:15.255Z,1513243335.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:15.658Z,1513243335.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:15.673Z,1513243335.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:16.040Z,1513243336.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:16.095Z,1513243336.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:16.460Z,1513243336.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:16.557Z,1513243336.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:16.844Z,1513243336.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:16.879Z,1513243336.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:17.231Z,1513243337.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:17.246Z,1513243337.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:17.639Z,1513243337.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:17.670Z,1513243337.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:18.038Z,1513243338.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:18.052Z,1513243338.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:18.428Z,1513243338.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:18.442Z,1513243338.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:18.850Z,1513243338.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:18.879Z,1513243338.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:19.246Z,1513243339.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:19.269Z,1513243339.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:19.655Z,1513243339.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:19.675Z,1513243339.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:20.032Z,1513243340.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:20.067Z,1513243340.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:20.428Z,1513243340.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:20.528Z,1513243340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:20.855Z,1513243340.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:20.883Z,1513243340.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:21.232Z,1513243341.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:21.258Z,1513243341.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:21.669Z,1513243341.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:21.771Z,1513243341.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:22.052Z,1513243342.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:22.067Z,1513243342.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:22.534Z,1513243342.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:22.560Z,1513243342.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:22.842Z,1513243342.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:22.874Z,1513243342.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:23.228Z,1513243343.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:23.266Z,1513243343.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:23.631Z,1513243343.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:23.687Z,1513243343.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:24.029Z,1513243344.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:24.044Z,1513243344.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:24.484Z,1513243344.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:24.527Z,1513243344.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:24.863Z,1513243344.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:24.887Z,1513243344.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:25.254Z,1513243345.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:25.312Z,1513243345.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:25.645Z,1513243345.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:25.675Z,1513243345.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:26.042Z,1513243346.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:26.067Z,1513243346.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:26.468Z,1513243346.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:26.491Z,1513243346.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:26.835Z,1513243346.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:26.882Z,1513243346.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:27.239Z,1513243347.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:27.274Z,1513243347.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:27.635Z,1513243347.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:27.650Z,1513243347.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:28.052Z,1513243348.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:28.083Z,1513243348.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:28.481Z,1513243348.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:28.503Z,1513243348.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:28.846Z,1513243348.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:28.882Z,1513243348.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:29.229Z,1513243349.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:29.244Z,1513243349.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:29.639Z,1513243349.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:29.659Z,1513243349.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:30.039Z,1513243350.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:30.053Z,1513243350.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:30.439Z,1513243350.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:30.503Z,1513243350.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:30.846Z,1513243350.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:30.861Z,1513243350.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:31.250Z,1513243351.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:31.294Z,1513243351.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:31.646Z,1513243351.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:31.660Z,1513243351.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:32.041Z,1513243352.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:32.055Z,1513243352.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:32.441Z,1513243352.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:32.455Z,1513243352.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:32.838Z,1513243352.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:32.858Z,1513243352.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:33.244Z,1513243353.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:33.259Z,1513243353.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:33.646Z,1513243353.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:33.699Z,1513243353.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:34.046Z,1513243354.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:34.061Z,1513243354.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:34.446Z,1513243354.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:34.462Z,1513243354.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:34.845Z,1513243354.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:34.860Z,1513243354.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:35.260Z,1513243355.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:35.314Z,1513243355.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:35.634Z,1513243355.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:35.665Z,1513243355.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:36.037Z,1513243356.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:36.077Z,1513243356.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:36.498Z,1513243356.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:36.529Z,1513243356.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:36.844Z,1513243356.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:36.868Z,1513243356.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:37.337Z,1513243357.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:37.352Z,1513243357.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:37.674Z,1513243357.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:37.714Z,1513243357.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:38.044Z,1513243358.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:38.070Z,1513243358.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:38.492Z,1513243358.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:38.531Z,1513243358.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:38.831Z,1513243358.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:38.846Z,1513243358.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:39.236Z,1513243359.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:39.255Z,1513243359.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:39.637Z,1513243359.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:39.659Z,1513243359.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:40.045Z,1513243360.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:40.060Z,1513243360.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:40.508Z,1513243360.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:40.541Z,1513243360.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:40.856Z,1513243360.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:40.911Z,1513243360.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:41.235Z,1513243361.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:41.255Z,1513243361.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:41.638Z,1513243361.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:41.652Z,1513243361.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:42.034Z,1513243362.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:42.052Z,1513243362.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:42.508Z,1513243362.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:42.532Z,1513243362.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:42.850Z,1513243362.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:42.871Z,1513243362.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:43.252Z,1513243363.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:43.272Z,1513243363.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:43.654Z,1513243363.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:43.675Z,1513243363.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:44.054Z,1513243364.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:44.095Z,1513243364.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:44.462Z,1513243364.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:44.583Z,1513243364.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:44.828Z,1513243364.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:44.910Z,1513243364.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:45.222Z,1513243365.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:45.261Z,1513243365.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:45.635Z,1513243365.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:45.687Z,1513243365.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:46.051Z,1513243366.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:46.066Z,1513243366.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:46.450Z,1513243366.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:46.467Z,1513243366.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:46.870Z,1513243366.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:46.915Z,1513243366.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:47.270Z,1513243367.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:47.284Z,1513243367.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:47.632Z,1513243367.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:47.686Z,1513243367.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:48.040Z,1513243368.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:48.055Z,1513243368.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:48.434Z,1513243368.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:48.449Z,1513243368.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:48.860Z,1513243368.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:48.902Z,1513243368.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:49.247Z,1513243369.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:49.262Z,1513243369.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:49.646Z,1513243369.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:49.684Z,1513243369.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:50.035Z,1513243370.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:50.051Z,1513243370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:50.499Z,1513243370.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:50.550Z,1513243370.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:50.828Z,1513243370.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:50.855Z,1513243370.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:51.228Z,1513243371.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:51.266Z,1513243371.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:51.627Z,1513243371.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:51.666Z,1513243371.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:52.053Z,1513243372.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:52.077Z,1513243372.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:52.514Z,1513243372.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:52.528Z,1513243372.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:52.837Z,1513243372.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:52.875Z,1513243372.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:53.235Z,1513243373.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:53.273Z,1513243373.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:53.626Z,1513243373.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:53.641Z,1513243373.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:54.036Z,1513243374.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:54.069Z,1513243374.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:54.488Z,1513243374.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:54.519Z,1513243374.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:54.834Z,1513243374.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:54.883Z,1513243374.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:55.255Z,1513243375.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:55.270Z,1513243375.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:55.650Z,1513243375.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:55.665Z,1513243375.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:56.024Z,1513243376.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:56.078Z,1513243376.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:56.500Z,1513243376.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:56.526Z,1513243376.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:56.876Z,1513243376.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:56.920Z,1513243376.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:57.228Z,1513243377.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:57.263Z,1513243377.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:57.631Z,1513243377.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:57.662Z,1513243377.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:58.053Z,1513243378.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:58.074Z,1513243378.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:58.439Z,1513243378.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:58.543Z,1513243378.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:58.849Z,1513243378.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:58.880Z,1513243378.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:59.236Z,1513243379.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:59.251Z,1513243379.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:22:59.624Z,1513243379.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:22:59.659Z,1513243379.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:00.053Z,1513243380.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:00.076Z,1513243380.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:00.432Z,1513243380.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:00.463Z,1513243380.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:00.852Z,1513243380.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:00.868Z,1513243380.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:01.251Z,1513243381.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:01.265Z,1513243381.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:01.668Z,1513243381.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:01.683Z,1513243381.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:02.021Z,1513243382.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:02.036Z,1513243382.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:02.427Z,1513243382.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:02.467Z,1513243382.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:02.862Z,1513243382.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:02.888Z,1513243382.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:03.260Z,1513243383.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:03.284Z,1513243383.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:03.632Z,1513243383.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:03.648Z,1513243383.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:04.046Z,1513243384.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:04.078Z,1513243384.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:04.510Z,1513243384.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:04.541Z,1513243384.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:04.844Z,1513243384.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:04.881Z,1513243384.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:05.234Z,1513243385.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:05.269Z,1513243385.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:05.627Z,1513243385.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:05.668Z,1513243385.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:06.028Z,1513243386.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:06.071Z,1513243386.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:06.537Z,1513243386.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:06.580Z,1513243386.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:06.850Z,1513243386.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:06.880Z,1513243386.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:07.249Z,1513243387.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:07.304Z,1513243387.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:10.897Z,1513243390.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:10.974Z,1513243390.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:11.071Z,1513243391.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:11.103Z,1513243391.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:11.441Z,1513243391.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:11.495Z,1513243391.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:11.843Z,1513243391.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:11.858Z,1513243391.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:12.240Z,1513243392.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:12.291Z,1513243392.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:12.654Z,1513243392.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:12.669Z,1513243392.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:13.050Z,1513243393.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:13.071Z,1513243393.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:13.458Z,1513243393.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:13.501Z,1513243393.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:13.849Z,1513243393.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:13.871Z,1513243393.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:14.239Z,1513243394.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:14.254Z,1513243394.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:14.640Z,1513243394.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:14.667Z,1513243394.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:15.053Z,1513243395.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:15.114Z,1513243395.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:15.443Z,1513243395.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:15.463Z,1513243395.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:15.852Z,1513243395.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:15.871Z,1513243395.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:16.257Z,1513243396.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:16.275Z,1513243396.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:16.655Z,1513243396.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:16.669Z,1513243396.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:17.058Z,1513243397.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:17.072Z,1513243397.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:17.435Z,1513243397.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:17.472Z,1513243397.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:17.832Z,1513243397.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:17.867Z,1513243397.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:18.236Z,1513243398.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:18.261Z,1513243398.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:18.634Z,1513243398.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:18.671Z,1513243398.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:19.062Z,1513243399.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:19.076Z,1513243399.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:19.459Z,1513243399.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:19.474Z,1513243399.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:19.855Z,1513243399.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:19.871Z,1513243399.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:20.235Z,1513243400.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:20.260Z,1513243400.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:20.635Z,1513243400.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:20.704Z,1513243400.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:21.036Z,1513243401.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:21.061Z,1513243401.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:21.436Z,1513243401.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:21.463Z,1513243401.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:21.866Z,1513243401.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:21.976Z,1513243401.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:22.275Z,1513243402.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:22.317Z,1513243402.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:22.658Z,1513243402.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:22.676Z,1513243402.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:23.035Z,1513243403.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:23.060Z,1513243403.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:23.435Z,1513243403.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:23.471Z,1513243403.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:23.471Z,1513243403.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177
2017-12-14T09:23:23.471Z,1513243403.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:23:23.477Z,1513243403.477 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:23.477Z,1513243403.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 177
2017-12-14T09:23:23.477Z,1513243403.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:23:23.479Z,1513243403.479 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:23.479Z,1513243403.479 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177
2017-12-14T09:23:23.480Z,1513243403.480 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:23:23.500Z,1513243403.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:23:23.500Z,1513243403.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:23:23.505Z,1513243403.505 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:23:23.843Z,1513243403.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:23.880Z,1513243403.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:23:23.880Z,1513243403.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177
2017-12-14T09:23:23.881Z,1513243403.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:23:23.881Z,1513243403.881 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 177
2017-12-14T09:23:23.881Z,1513243403.881 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:23:23.881Z,1513243403.881 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177
2017-12-14T09:23:24.236Z,1513243404.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:24.274Z,1513243404.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:23:24.274Z,1513243404.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:23:24.275Z,1513243404.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:23:24.275Z,1513243404.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:23:24.275Z,1513243404.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:23:24.276Z,1513243404.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:23:24.276Z,1513243404.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:23:24.276Z,1513243404.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:23:24.281Z,1513243404.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:23:24.641Z,1513243404.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:24.680Z,1513243404.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:25.049Z,1513243405.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:25.084Z,1513243405.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:25.457Z,1513243405.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:25.541Z,1513243405.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:25.856Z,1513243405.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:25.884Z,1513243405.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:26.236Z,1513243406.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:26.255Z,1513243406.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:26.636Z,1513243406.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:26.662Z,1513243406.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:27.035Z,1513243407.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:27.067Z,1513243407.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:27.435Z,1513243407.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:27.468Z,1513243407.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:27.858Z,1513243407.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:27.872Z,1513243407.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:28.261Z,1513243408.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:28.276Z,1513243408.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:28.663Z,1513243408.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:28.677Z,1513243408.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:29.044Z,1513243409.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:29.067Z,1513243409.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:29.444Z,1513243409.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:29.460Z,1513243409.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:29.842Z,1513243409.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:29.860Z,1513243409.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:30.246Z,1513243410.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:30.261Z,1513243410.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:30.643Z,1513243410.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:30.660Z,1513243410.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:31.046Z,1513243411.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:31.078Z,1513243411.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:31.454Z,1513243411.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:31.526Z,1513243411.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:31.858Z,1513243411.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:31.879Z,1513243411.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:32.245Z,1513243412.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:32.295Z,1513243412.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:32.642Z,1513243412.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:32.656Z,1513243412.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:33.038Z,1513243413.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:33.090Z,1513243413.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:33.448Z,1513243413.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:33.462Z,1513243413.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:33.854Z,1513243413.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:33.875Z,1513243413.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:34.255Z,1513243414.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:34.270Z,1513243414.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:34.653Z,1513243414.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:34.669Z,1513243414.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:35.063Z,1513243415.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:35.104Z,1513243415.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:35.435Z,1513243415.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:35.461Z,1513243415.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:35.836Z,1513243415.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:35.862Z,1513243415.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:36.245Z,1513243416.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:36.276Z,1513243416.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:36.635Z,1513243416.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:36.662Z,1513243416.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:37.058Z,1513243417.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:37.073Z,1513243417.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:37.457Z,1513243417.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:37.472Z,1513243417.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:37.861Z,1513243417.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:37.876Z,1513243417.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:38.268Z,1513243418.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:38.299Z,1513243418.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:38.636Z,1513243418.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:38.718Z,1513243418.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:39.040Z,1513243419.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:39.067Z,1513243419.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:39.439Z,1513243419.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:39.479Z,1513243419.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:39.849Z,1513243419.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:39.880Z,1513243419.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:40.265Z,1513243420.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:40.280Z,1513243420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:40.649Z,1513243420.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:40.668Z,1513243420.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:41.040Z,1513243421.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:41.071Z,1513243421.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:41.440Z,1513243421.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:41.523Z,1513243421.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:41.843Z,1513243421.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:41.871Z,1513243421.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:42.244Z,1513243422.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:42.279Z,1513243422.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:42.646Z,1513243422.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:42.661Z,1513243422.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:43.057Z,1513243423.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:43.088Z,1513243423.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:43.454Z,1513243423.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:43.468Z,1513243423.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:43.850Z,1513243423.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:43.864Z,1513243423.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:44.245Z,1513243424.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:44.260Z,1513243424.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:44.644Z,1513243424.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:44.697Z,1513243424.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:45.052Z,1513243425.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:45.080Z,1513243425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:45.442Z,1513243425.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:45.456Z,1513243425.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:45.854Z,1513243425.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:45.884Z,1513243425.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:46.257Z,1513243426.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:46.290Z,1513243426.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:46.650Z,1513243426.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:46.665Z,1513243426.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:47.038Z,1513243427.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:47.062Z,1513243427.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:47.445Z,1513243427.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:47.467Z,1513243427.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:47.846Z,1513243427.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:47.861Z,1513243427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:48.241Z,1513243428.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:48.276Z,1513243428.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:48.636Z,1513243428.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:48.678Z,1513243428.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:49.051Z,1513243429.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:49.080Z,1513243429.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:49.450Z,1513243429.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:49.483Z,1513243429.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:49.850Z,1513243429.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:49.880Z,1513243429.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:50.243Z,1513243430.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:50.283Z,1513243430.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:50.640Z,1513243430.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:50.666Z,1513243430.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:51.050Z,1513243431.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:51.100Z,1513243431.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:51.452Z,1513243431.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:51.487Z,1513243431.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:51.853Z,1513243431.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:51.951Z,1513243431.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:52.298Z,1513243432.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:52.313Z,1513243432.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:52.650Z,1513243432.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:52.694Z,1513243432.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:53.043Z,1513243433.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:53.062Z,1513243433.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:53.440Z,1513243433.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:53.500Z,1513243433.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:53.841Z,1513243433.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:53.864Z,1513243433.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:54.259Z,1513243434.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:54.297Z,1513243434.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:54.643Z,1513243434.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:54.663Z,1513243434.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:55.058Z,1513243435.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:55.079Z,1513243435.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:55.456Z,1513243435.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:55.470Z,1513243435.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:55.855Z,1513243435.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:55.875Z,1513243435.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:56.248Z,1513243436.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:56.267Z,1513243436.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:56.632Z,1513243436.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:56.657Z,1513243436.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:57.035Z,1513243437.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:57.062Z,1513243437.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:57.471Z,1513243437.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:57.517Z,1513243437.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:57.847Z,1513243437.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:57.875Z,1513243437.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:58.258Z,1513243438.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:58.276Z,1513243438.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:58.648Z,1513243438.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:58.674Z,1513243438.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:59.045Z,1513243439.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:59.060Z,1513243439.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:59.445Z,1513243439.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:59.460Z,1513243439.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:23:59.845Z,1513243439.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:23:59.859Z,1513243439.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:00.244Z,1513243440.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:00.259Z,1513243440.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:00.671Z,1513243440.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:00.699Z,1513243440.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:01.049Z,1513243441.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:01.068Z,1513243441.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:01.450Z,1513243441.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:01.464Z,1513243441.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:01.850Z,1513243441.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:01.903Z,1513243441.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:02.246Z,1513243442.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:02.261Z,1513243442.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:02.644Z,1513243442.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:02.659Z,1513243442.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:03.043Z,1513243443.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:03.060Z,1513243443.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:03.439Z,1513243443.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:03.466Z,1513243443.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:03.865Z,1513243443.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:03.908Z,1513243443.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:04.254Z,1513243444.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:04.275Z,1513243444.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:04.654Z,1513243444.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:04.669Z,1513243444.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:05.040Z,1513243445.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:05.070Z,1513243445.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:05.448Z,1513243445.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:05.464Z,1513243445.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:05.845Z,1513243445.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:05.860Z,1513243445.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:06.243Z,1513243446.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:06.263Z,1513243446.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:06.645Z,1513243446.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:06.668Z,1513243446.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:07.093Z,1513243447.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:07.112Z,1513243447.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:07.459Z,1513243447.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:07.479Z,1513243447.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:11.025Z,1513243451.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:11.055Z,1513243451.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:11.159Z,1513243451.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:11.175Z,1513243451.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:11.515Z,1513243451.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:11.553Z,1513243451.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:11.917Z,1513243451.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:11.932Z,1513243451.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:12.319Z,1513243452.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:12.334Z,1513243452.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:12.756Z,1513243452.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:12.886Z,1513243452.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:13.133Z,1513243453.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:13.148Z,1513243453.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:13.537Z,1513243453.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:13.619Z,1513243453.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:13.924Z,1513243453.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:13.939Z,1513243453.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:14.311Z,1513243454.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:14.375Z,1513243454.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:14.707Z,1513243454.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:14.743Z,1513243454.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:15.134Z,1513243455.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:15.151Z,1513243455.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:15.519Z,1513243455.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:15.545Z,1513243455.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:15.914Z,1513243455.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:15.940Z,1513243455.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:16.304Z,1513243456.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:16.351Z,1513243456.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:16.730Z,1513243456.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:16.753Z,1513243456.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:17.107Z,1513243457.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:17.132Z,1513243457.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:17.516Z,1513243457.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:17.531Z,1513243457.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:17.931Z,1513243457.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:17.946Z,1513243457.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:18.338Z,1513243458.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:18.361Z,1513243458.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:18.718Z,1513243458.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:18.752Z,1513243458.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:19.113Z,1513243459.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:19.128Z,1513243459.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:19.504Z,1513243459.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:19.551Z,1513243459.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:19.916Z,1513243459.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:19.979Z,1513243459.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:20.318Z,1513243460.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:20.335Z,1513243460.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:20.718Z,1513243460.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:20.733Z,1513243460.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:21.128Z,1513243461.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:21.160Z,1513243461.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:21.524Z,1513243461.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:21.538Z,1513243461.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:21.919Z,1513243461.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:21.940Z,1513243461.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:22.319Z,1513243462.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:22.334Z,1513243462.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:22.713Z,1513243462.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:22.760Z,1513243462.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:23.126Z,1513243463.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:23.161Z,1513243463.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:23.532Z,1513243463.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:23.547Z,1513243463.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:23.929Z,1513243463.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:23.943Z,1513243463.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:24.338Z,1513243464.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:24.353Z,1513243464.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:24.727Z,1513243464.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:24.825Z,1513243464.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:25.111Z,1513243465.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:25.150Z,1513243465.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:25.501Z,1513243465.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:25.516Z,1513243465.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:25.912Z,1513243465.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:25.944Z,1513243465.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:26.344Z,1513243466.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:26.392Z,1513243466.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:26.713Z,1513243466.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:26.784Z,1513243466.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:27.122Z,1513243467.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:27.137Z,1513243467.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:27.526Z,1513243467.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:27.541Z,1513243467.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:27.925Z,1513243467.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:27.957Z,1513243467.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:28.309Z,1513243468.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:28.347Z,1513243468.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:28.717Z,1513243468.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:28.738Z,1513243468.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:29.121Z,1513243469.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:29.139Z,1513243469.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:29.529Z,1513243469.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:29.568Z,1513243469.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:29.939Z,1513243469.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:29.959Z,1513243469.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:30.337Z,1513243470.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:30.352Z,1513243470.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:30.744Z,1513243470.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:30.759Z,1513243470.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:31.115Z,1513243471.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:31.138Z,1513243471.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:31.515Z,1513243471.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:31.547Z,1513243471.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:31.915Z,1513243471.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:31.930Z,1513243471.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:32.309Z,1513243472.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:32.336Z,1513243472.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:32.783Z,1513243472.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:32.806Z,1513243472.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T09:24:32.855Z,1513243472.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:33.123Z,1513243473.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:33.179Z,1513243473.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:33.526Z,1513243473.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:33.554Z,1513243473.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:33.910Z,1513243473.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:33.944Z,1513243473.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:34.318Z,1513243474.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:34.324Z,1513243474.324 [PNI_TCM](ERROR): CRC does not match. Expected:0x10640 got:0x41861
2017-12-14T09:24:34.359Z,1513243474.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:34.716Z,1513243474.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:34.752Z,1513243474.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:35.124Z,1513243475.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:35.141Z,1513243475.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:35.530Z,1513243475.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:35.573Z,1513243475.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:35.958Z,1513243475.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:36.004Z,1513243476.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:36.324Z,1513243476.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:36.379Z,1513243476.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:36.724Z,1513243476.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:36.763Z,1513243476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:37.108Z,1513243477.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:37.143Z,1513243477.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:37.503Z,1513243477.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:37.544Z,1513243477.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:37.926Z,1513243477.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:37.941Z,1513243477.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:38.322Z,1513243478.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:38.336Z,1513243478.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:38.724Z,1513243478.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:38.804Z,1513243478.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:39.104Z,1513243479.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:39.160Z,1513243479.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:39.513Z,1513243479.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:39.544Z,1513243479.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:39.911Z,1513243479.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:39.947Z,1513243479.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:40.311Z,1513243480.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:40.340Z,1513243480.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:40.716Z,1513243480.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:40.722Z,1513243480.722 [PNI_TCM](ERROR): CRC does not match. Expected:0x36821 got:0x16850
2017-12-14T09:24:40.812Z,1513243480.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:41.124Z,1513243481.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:41.142Z,1513243481.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:41.522Z,1513243481.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:41.536Z,1513243481.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:41.926Z,1513243481.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:41.941Z,1513243481.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:42.327Z,1513243482.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:42.375Z,1513243482.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:42.707Z,1513243482.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:42.739Z,1513243482.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:43.112Z,1513243483.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:43.143Z,1513243483.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:43.507Z,1513243483.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:43.543Z,1513243483.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:43.932Z,1513243483.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:43.948Z,1513243483.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:44.329Z,1513243484.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:44.343Z,1513243484.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:44.726Z,1513243484.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:44.800Z,1513243484.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:45.107Z,1513243485.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:45.144Z,1513243485.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:45.515Z,1513243485.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:45.535Z,1513243485.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:45.932Z,1513243485.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:45.957Z,1513243485.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:46.314Z,1513243486.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:46.347Z,1513243486.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:46.719Z,1513243486.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:46.739Z,1513243486.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:47.127Z,1513243487.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:47.158Z,1513243487.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:47.524Z,1513243487.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:47.543Z,1513243487.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:47.917Z,1513243487.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:47.932Z,1513243487.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:48.320Z,1513243488.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:48.339Z,1513243488.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:48.747Z,1513243488.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:48.789Z,1513243488.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:49.130Z,1513243489.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:49.148Z,1513243489.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:49.527Z,1513243489.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:49.548Z,1513243489.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:49.936Z,1513243489.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:49.977Z,1513243489.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:50.309Z,1513243490.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:50.340Z,1513243490.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:50.715Z,1513243490.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:50.738Z,1513243490.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:51.111Z,1513243491.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:51.138Z,1513243491.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:51.503Z,1513243491.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:51.538Z,1513243491.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:51.936Z,1513243491.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:51.989Z,1513243491.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:52.343Z,1513243492.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:52.363Z,1513243492.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:52.732Z,1513243492.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:52.837Z,1513243492.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:53.107Z,1513243493.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:53.151Z,1513243493.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:53.508Z,1513243493.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:53.551Z,1513243493.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:53.913Z,1513243493.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:53.928Z,1513243493.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:54.312Z,1513243494.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:54.327Z,1513243494.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:54.709Z,1513243494.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:54.813Z,1513243494.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:55.167Z,1513243495.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:55.182Z,1513243495.182 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T09:24:55.208Z,1513243495.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:55.528Z,1513243495.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:55.543Z,1513243495.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:55.931Z,1513243495.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:56.097Z,1513243496.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:56.304Z,1513243496.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:56.343Z,1513243496.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:56.703Z,1513243496.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:56.763Z,1513243496.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:57.136Z,1513243497.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:57.162Z,1513243497.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:57.513Z,1513243497.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:57.586Z,1513243497.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:57.937Z,1513243497.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:57.952Z,1513243497.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:58.353Z,1513243498.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:58.465Z,1513243498.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:58.722Z,1513243498.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:58.746Z,1513243498.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:59.117Z,1513243499.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:59.132Z,1513243499.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:59.512Z,1513243499.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:59.534Z,1513243499.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:24:59.918Z,1513243499.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:24:59.933Z,1513243499.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:00.318Z,1513243500.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:00.336Z,1513243500.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:00.716Z,1513243500.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:00.735Z,1513243500.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:01.121Z,1513243501.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:01.139Z,1513243501.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:01.526Z,1513243501.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:01.543Z,1513243501.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:01.925Z,1513243501.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:01.969Z,1513243501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:02.321Z,1513243502.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:02.336Z,1513243502.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:02.711Z,1513243502.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:02.763Z,1513243502.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:03.115Z,1513243503.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:03.122Z,1513243503.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x4983 got:0x1858
2017-12-14T09:25:03.140Z,1513243503.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:03.520Z,1513243503.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:03.535Z,1513243503.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:03.926Z,1513243503.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:03.940Z,1513243503.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:04.330Z,1513243504.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:04.344Z,1513243504.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:04.734Z,1513243504.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:04.792Z,1513243504.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:05.108Z,1513243505.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:05.134Z,1513243505.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:05.508Z,1513243505.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:05.533Z,1513243505.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:05.902Z,1513243505.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:05.939Z,1513243505.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:06.325Z,1513243506.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:06.340Z,1513243506.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:06.707Z,1513243506.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:06.818Z,1513243506.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:07.126Z,1513243507.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:07.146Z,1513243507.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:07.533Z,1513243507.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:07.549Z,1513243507.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:11.014Z,1513243511.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:11.043Z,1513243511.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:11.169Z,1513243511.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:11.214Z,1513243511.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:11.507Z,1513243511.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:11.532Z,1513243511.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:11.906Z,1513243511.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:11.924Z,1513243511.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:12.303Z,1513243512.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:12.335Z,1513243512.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:12.719Z,1513243512.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:12.733Z,1513243512.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:13.123Z,1513243513.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:13.143Z,1513243513.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:13.516Z,1513243513.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:13.531Z,1513243513.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:13.907Z,1513243513.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:13.955Z,1513243513.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:14.291Z,1513243514.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:14.315Z,1513243514.315 [PNI_TCM](ERROR): CRC does not match. Expected:0x50016 got:0x16897
2017-12-14T09:25:14.374Z,1513243514.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:14.723Z,1513243514.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:14.738Z,1513243514.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:15.107Z,1513243515.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:15.133Z,1513243515.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:15.491Z,1513243515.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:15.543Z,1513243515.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:15.908Z,1513243515.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:15.940Z,1513243515.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:16.310Z,1513243516.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:16.339Z,1513243516.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:16.708Z,1513243516.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:16.739Z,1513243516.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:17.095Z,1513243517.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:17.148Z,1513243517.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:17.530Z,1513243517.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:17.635Z,1513243517.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:17.901Z,1513243517.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:17.918Z,1513243517.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:18.313Z,1513243518.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:18.328Z,1513243518.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:18.699Z,1513243518.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:18.764Z,1513243518.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:19.115Z,1513243519.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:19.130Z,1513243519.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:19.516Z,1513243519.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:19.531Z,1513243519.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:19.915Z,1513243519.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:19.963Z,1513243519.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:20.300Z,1513243520.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:20.329Z,1513243520.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:20.704Z,1513243520.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:20.859Z,1513243520.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:21.106Z,1513243521.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:21.139Z,1513243521.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:21.501Z,1513243521.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:21.516Z,1513243521.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:21.906Z,1513243521.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:21.943Z,1513243521.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:22.324Z,1513243522.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:22.338Z,1513243522.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:22.700Z,1513243522.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:22.729Z,1513243522.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:23.098Z,1513243523.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:23.135Z,1513243523.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:23.504Z,1513243523.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:23.539Z,1513243523.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:23.885Z,1513243523.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:23.920Z,1513243523.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:24.292Z,1513243524.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:24.327Z,1513243524.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:24.705Z,1513243524.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:24.727Z,1513243524.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:25.114Z,1513243525.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:25.136Z,1513243525.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:25.519Z,1513243525.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:25.534Z,1513243525.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:25.924Z,1513243525.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:25.943Z,1513243525.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:26.307Z,1513243526.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:26.321Z,1513243526.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:26.691Z,1513243526.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:26.735Z,1513243526.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:27.121Z,1513243527.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:27.174Z,1513243527.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:27.492Z,1513243527.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:27.526Z,1513243527.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:27.917Z,1513243527.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:27.963Z,1513243527.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:28.325Z,1513243528.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:28.339Z,1513243528.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:28.718Z,1513243528.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:28.743Z,1513243528.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:29.103Z,1513243529.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:29.174Z,1513243529.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:29.495Z,1513243529.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:29.527Z,1513243529.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:29.895Z,1513243529.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:29.954Z,1513243529.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:30.327Z,1513243530.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:30.371Z,1513243530.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:30.720Z,1513243530.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:30.735Z,1513243530.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:31.112Z,1513243531.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:31.135Z,1513243531.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:31.522Z,1513243531.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:31.540Z,1513243531.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:31.911Z,1513243531.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:31.936Z,1513243531.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:32.291Z,1513243532.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:32.324Z,1513243532.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:32.697Z,1513243532.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:32.724Z,1513243532.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:33.092Z,1513243533.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:33.132Z,1513243533.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:33.495Z,1513243533.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:33.528Z,1513243533.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:33.918Z,1513243533.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:33.933Z,1513243533.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:34.314Z,1513243534.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:34.336Z,1513243534.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:34.705Z,1513243534.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:34.833Z,1513243534.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:35.101Z,1513243535.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:35.134Z,1513243535.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:35.499Z,1513243535.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:35.511Z,1513243535.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x30196 got:0x16896
2017-12-14T09:25:35.543Z,1513243535.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:35.904Z,1513243535.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:35.941Z,1513243535.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:36.297Z,1513243536.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:36.348Z,1513243536.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:36.727Z,1513243536.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:36.838Z,1513243536.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:37.121Z,1513243537.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:37.135Z,1513243537.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:37.518Z,1513243537.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:37.533Z,1513243537.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:37.914Z,1513243537.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:37.936Z,1513243537.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:38.300Z,1513243538.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:38.356Z,1513243538.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:38.691Z,1513243538.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:38.713Z,1513243538.713 [PNI_TCM](ERROR): CRC does not match. Expected:0x53669 got:0x16850
2017-12-14T09:25:38.740Z,1513243538.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:39.095Z,1513243539.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:39.130Z,1513243539.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:39.495Z,1513243539.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:39.540Z,1513243539.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:39.908Z,1513243539.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:40.027Z,1513243540.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:40.326Z,1513243540.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:40.340Z,1513243540.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:40.709Z,1513243540.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:40.741Z,1513243540.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:41.095Z,1513243541.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:41.174Z,1513243541.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:41.502Z,1513243541.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:41.524Z,1513243541.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:41.909Z,1513243541.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:41.923Z,1513243541.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:42.306Z,1513243542.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:42.358Z,1513243542.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:42.720Z,1513243542.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:42.738Z,1513243542.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:43.116Z,1513243543.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:43.194Z,1513243543.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:43.528Z,1513243543.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:43.548Z,1513243543.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:43.918Z,1513243543.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:44.034Z,1513243544.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:44.292Z,1513243544.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:44.327Z,1513243544.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:44.691Z,1513243544.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:44.727Z,1513243544.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:45.091Z,1513243545.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:45.134Z,1513243545.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:45.503Z,1513243545.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:45.528Z,1513243545.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:45.902Z,1513243545.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:45.939Z,1513243545.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:46.328Z,1513243546.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:46.375Z,1513243546.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:46.721Z,1513243546.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:46.736Z,1513243546.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:47.096Z,1513243547.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:47.133Z,1513243547.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:47.493Z,1513243547.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:47.538Z,1513243547.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:47.891Z,1513243547.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:47.931Z,1513243547.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:48.300Z,1513243548.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:48.329Z,1513243548.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:48.705Z,1513243548.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:48.731Z,1513243548.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:49.114Z,1513243549.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:49.146Z,1513243549.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:49.526Z,1513243549.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:49.547Z,1513243549.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:49.920Z,1513243549.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:49.946Z,1513243549.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:50.306Z,1513243550.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:50.320Z,1513243550.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:50.697Z,1513243550.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:50.819Z,1513243550.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:51.102Z,1513243551.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:51.141Z,1513243551.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:51.506Z,1513243551.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:51.549Z,1513243551.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:51.914Z,1513243551.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:51.951Z,1513243551.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:52.306Z,1513243552.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:52.343Z,1513243552.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:52.708Z,1513243552.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:52.779Z,1513243552.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:53.091Z,1513243553.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:53.124Z,1513243553.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:53.494Z,1513243553.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:53.531Z,1513243553.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:53.892Z,1513243553.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:53.927Z,1513243553.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:54.297Z,1513243554.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:54.340Z,1513243554.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:54.691Z,1513243554.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:54.726Z,1513243554.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:55.115Z,1513243555.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:55.132Z,1513243555.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:55.510Z,1513243555.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:55.535Z,1513243555.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:55.930Z,1513243555.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:55.974Z,1513243555.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:56.002Z,1513243556.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:56.301Z,1513243556.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:56.330Z,1513243556.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:56.697Z,1513243556.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:56.727Z,1513243556.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:56.797Z,1513243556.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:57.092Z,1513243557.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:57.138Z,1513243557.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:57.201Z,1513243557.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:57.499Z,1513243557.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:57.531Z,1513243557.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:57.899Z,1513243557.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:57.924Z,1513243557.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:57.998Z,1513243557.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:58.314Z,1513243558.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:58.334Z,1513243558.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:58.737Z,1513243558.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:58.759Z,1513243558.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:58.793Z,1513243558.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:59.096Z,1513243559.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:59.147Z,1513243559.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:59.197Z,1513243559.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:59.506Z,1513243559.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:59.537Z,1513243559.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:25:59.905Z,1513243559.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:25:59.920Z,1513243559.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:00.303Z,1513243560.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:00.344Z,1513243560.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:00.699Z,1513243560.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:00.722Z,1513243560.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:01.118Z,1513243561.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:01.148Z,1513243561.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:01.515Z,1513243561.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:01.546Z,1513243561.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:01.927Z,1513243561.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:01.948Z,1513243561.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:02.325Z,1513243562.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:02.383Z,1513243562.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:02.691Z,1513243562.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:02.724Z,1513243562.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:03.102Z,1513243563.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:03.135Z,1513243563.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:03.499Z,1513243563.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:03.607Z,1513243563.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:03.911Z,1513243563.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:03.941Z,1513243563.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:04.010Z,1513243564.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:04.319Z,1513243564.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:04.346Z,1513243564.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:04.713Z,1513243564.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:04.802Z,1513243564.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:04.810Z,1513243564.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:05.096Z,1513243565.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:05.133Z,1513243565.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:05.213Z,1513243565.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:05.498Z,1513243565.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:05.591Z,1513243565.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:05.902Z,1513243565.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:05.919Z,1513243565.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:06.010Z,1513243566.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:06.302Z,1513243566.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:06.320Z,1513243566.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:06.699Z,1513243566.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:06.736Z,1513243566.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:06.739Z,1513243566.739 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:26:06.739Z,1513243566.739 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:26:06.739Z,1513243566.739 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:26:06.740Z,1513243566.740 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:26:06.805Z,1513243566.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:07.107Z,1513243567.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:07.139Z,1513243567.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:07.146Z,1513243567.146 [Default:CheckIn:D] Stopped
2017-12-14T09:26:07.147Z,1513243567.147 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:26:07.209Z,1513243567.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:07.510Z,1513243567.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:07.525Z,1513243567.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:07.545Z,1513243567.545 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 532.862598 min 
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn:E] Stopped
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn] Stopped
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn](INFO): Running loop #52
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn] Running Loop=52
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:26:07.546Z,1513243567.546 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:26:07.913Z,1513243567.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:07.928Z,1513243567.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:08.006Z,1513243568.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:08.801Z,1513243568.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:09.205Z,1513243569.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:10.002Z,1513243570.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:10.797Z,1513243570.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:11.201Z,1513243571.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:11.563Z,1513243571.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:11.578Z,1513243571.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:11.673Z,1513243571.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:11.714Z,1513243571.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:11.998Z,1513243571.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:12.070Z,1513243572.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:12.084Z,1513243572.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:12.509Z,1513243572.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:12.532Z,1513243572.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:12.797Z,1513243572.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:12.885Z,1513243572.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:12.911Z,1513243572.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:13.201Z,1513243573.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:13.258Z,1513243573.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:13.285Z,1513243573.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:13.667Z,1513243573.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:13.708Z,1513243573.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:13.998Z,1513243573.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:14.074Z,1513243574.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:14.088Z,1513243574.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:14.514Z,1513243574.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:14.556Z,1513243574.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:14.793Z,1513243574.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:14.881Z,1513243574.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:14.903Z,1513243574.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:15.197Z,1513243575.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:15.282Z,1513243575.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:15.303Z,1513243575.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:15.678Z,1513243575.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:15.693Z,1513243575.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:15.993Z,1513243575.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:16.059Z,1513243576.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:16.087Z,1513243576.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:16.462Z,1513243576.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:16.485Z,1513243576.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:16.791Z,1513243576.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:16.867Z,1513243576.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:16.887Z,1513243576.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:17.201Z,1513243577.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:17.264Z,1513243577.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:17.279Z,1513243577.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:17.663Z,1513243577.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:17.683Z,1513243577.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:17.998Z,1513243577.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:18.074Z,1513243578.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:18.088Z,1513243578.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:18.478Z,1513243578.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:18.492Z,1513243578.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:18.795Z,1513243578.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:18.912Z,1513243578.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:18.966Z,1513243578.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:19.202Z,1513243579.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:19.277Z,1513243579.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:19.312Z,1513243579.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:19.673Z,1513243579.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:19.688Z,1513243579.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:19.999Z,1513243579.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:20.064Z,1513243580.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:20.106Z,1513243580.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:20.502Z,1513243580.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:20.551Z,1513243580.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:20.794Z,1513243580.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:20.910Z,1513243580.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:20.930Z,1513243580.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:21.198Z,1513243581.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:21.299Z,1513243581.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:21.323Z,1513243581.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:21.678Z,1513243581.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:21.721Z,1513243581.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:21.995Z,1513243581.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:22.069Z,1513243582.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:22.092Z,1513243582.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:22.505Z,1513243582.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:22.562Z,1513243582.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:22.790Z,1513243582.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:22.879Z,1513243582.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:22.923Z,1513243582.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:23.193Z,1513243583.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:23.269Z,1513243583.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:23.330Z,1513243583.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:23.670Z,1513243583.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:23.727Z,1513243583.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:23.990Z,1513243583.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:24.080Z,1513243584.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:24.104Z,1513243584.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:24.519Z,1513243584.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:24.555Z,1513243584.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:24.555Z,1513243584.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178
2017-12-14T09:26:24.555Z,1513243584.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:26:24.581Z,1513243584.581 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:24.581Z,1513243584.581 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 178
2017-12-14T09:26:24.581Z,1513243584.581 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:26:24.583Z,1513243584.583 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:24.583Z,1513243584.583 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178
2017-12-14T09:26:24.583Z,1513243584.583 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:26:24.620Z,1513243584.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:26:24.621Z,1513243584.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:26:24.621Z,1513243584.621 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:26:24.787Z,1513243584.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:24.909Z,1513243584.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:24.976Z,1513243584.976 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:26:24.985Z,1513243584.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178
2017-12-14T09:26:24.985Z,1513243584.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:26:24.985Z,1513243584.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 178
2017-12-14T09:26:24.986Z,1513243584.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:26:24.986Z,1513243584.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178
2017-12-14T09:26:25.195Z,1513243585.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:25.284Z,1513243585.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:25.327Z,1513243585.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:26:25.327Z,1513243585.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:26:25.328Z,1513243585.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:26:25.328Z,1513243585.328 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:26:25.333Z,1513243585.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:26:25.333Z,1513243585.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:26:25.334Z,1513243585.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:26:25.334Z,1513243585.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:26:25.335Z,1513243585.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:26:25.697Z,1513243585.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:25.811Z,1513243585.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:25.990Z,1513243585.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:26.058Z,1513243586.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:26.135Z,1513243586.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:26.503Z,1513243586.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:26.558Z,1513243586.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:26.785Z,1513243586.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:26.897Z,1513243586.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:26.914Z,1513243586.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:27.189Z,1513243587.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:27.286Z,1513243587.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:27.343Z,1513243587.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:27.674Z,1513243587.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:27.696Z,1513243587.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:27.986Z,1513243587.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:28.075Z,1513243588.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:28.123Z,1513243588.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:28.548Z,1513243588.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:28.580Z,1513243588.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:28.790Z,1513243588.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:28.865Z,1513243588.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:28.896Z,1513243588.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:29.193Z,1513243589.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:29.270Z,1513243589.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:29.284Z,1513243589.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:29.686Z,1513243589.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:29.704Z,1513243589.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:29.990Z,1513243589.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:30.102Z,1513243590.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:30.124Z,1513243590.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:30.478Z,1513243590.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:30.492Z,1513243590.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:30.787Z,1513243590.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:30.929Z,1513243590.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:30.984Z,1513243590.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:31.194Z,1513243591.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:31.257Z,1513243591.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:31.272Z,1513243591.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:31.670Z,1513243591.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:31.726Z,1513243591.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:31.990Z,1513243591.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:32.095Z,1513243592.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:32.131Z,1513243592.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:32.461Z,1513243592.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:32.476Z,1513243592.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:32.787Z,1513243592.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:32.870Z,1513243592.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:32.914Z,1513243592.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:33.213Z,1513243593.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:33.282Z,1513243593.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:33.322Z,1513243593.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:33.677Z,1513243593.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:33.696Z,1513243593.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:34.010Z,1513243594.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:34.075Z,1513243594.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:34.129Z,1513243594.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:34.498Z,1513243594.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:34.553Z,1513243594.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:34.808Z,1513243594.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:34.874Z,1513243594.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:34.901Z,1513243594.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:35.213Z,1513243595.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:35.266Z,1513243595.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:35.328Z,1513243595.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:35.673Z,1513243595.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:35.736Z,1513243595.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:36.011Z,1513243596.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:36.081Z,1513243596.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:36.104Z,1513243596.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:36.548Z,1513243596.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:36.593Z,1513243596.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:36.806Z,1513243596.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:36.876Z,1513243596.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:36.918Z,1513243596.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:37.210Z,1513243597.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:37.278Z,1513243597.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:37.311Z,1513243597.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:37.662Z,1513243597.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:37.684Z,1513243597.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:38.006Z,1513243598.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:38.070Z,1513243598.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:38.111Z,1513243598.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:38.486Z,1513243598.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:38.549Z,1513243598.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:38.802Z,1513243598.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:38.871Z,1513243598.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:38.911Z,1513243598.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:39.205Z,1513243599.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:39.274Z,1513243599.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:39.320Z,1513243599.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:39.671Z,1513243599.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:39.695Z,1513243599.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:40.002Z,1513243600.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:40.056Z,1513243600.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:40.123Z,1513243600.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:40.483Z,1513243600.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:40.503Z,1513243600.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:40.798Z,1513243600.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:40.858Z,1513243600.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:40.892Z,1513243600.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:41.258Z,1513243601.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:41.292Z,1513243601.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:41.586Z,1513243601.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:41.657Z,1513243601.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:41.702Z,1513243601.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:42.068Z,1513243602.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:42.099Z,1513243602.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:42.382Z,1513243602.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:42.486Z,1513243602.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:42.575Z,1513243602.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:42.878Z,1513243602.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:42.911Z,1513243602.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:42.946Z,1513243602.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:43.258Z,1513243603.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:43.305Z,1513243603.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:43.688Z,1513243603.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:43.707Z,1513243603.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:43.741Z,1513243603.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:44.090Z,1513243604.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:44.115Z,1513243604.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:44.503Z,1513243604.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:44.552Z,1513243604.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:44.555Z,1513243604.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:44.873Z,1513243604.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:44.920Z,1513243604.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:45.206Z,1513243605.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:45.281Z,1513243605.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:45.335Z,1513243605.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:45.677Z,1513243605.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:45.699Z,1513243605.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:46.001Z,1513243606.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:46.064Z,1513243606.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:46.133Z,1513243606.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:46.455Z,1513243606.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:46.492Z,1513243606.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:46.799Z,1513243606.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:46.878Z,1513243606.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:46.894Z,1513243606.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:47.205Z,1513243607.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:47.256Z,1513243607.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:47.294Z,1513243607.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:47.659Z,1513243607.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:47.691Z,1513243607.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:48.002Z,1513243608.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:48.078Z,1513243608.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:48.097Z,1513243608.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:48.505Z,1513243608.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:48.567Z,1513243608.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:48.837Z,1513243608.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:48.882Z,1513243608.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:48.934Z,1513243608.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:49.253Z,1513243609.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:49.286Z,1513243609.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:49.311Z,1513243609.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:49.655Z,1513243609.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:49.711Z,1513243609.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:50.051Z,1513243610.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:50.061Z,1513243610.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:50.098Z,1513243610.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:50.495Z,1513243610.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:50.551Z,1513243610.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:50.845Z,1513243610.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:50.878Z,1513243610.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:50.911Z,1513243610.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:51.249Z,1513243611.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:51.288Z,1513243611.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:51.307Z,1513243611.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:51.685Z,1513243611.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:51.700Z,1513243611.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:52.046Z,1513243612.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:52.063Z,1513243612.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:52.089Z,1513243612.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:52.524Z,1513243612.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:52.551Z,1513243612.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:52.841Z,1513243612.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:52.880Z,1513243612.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:52.902Z,1513243612.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:53.245Z,1513243613.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:53.263Z,1513243613.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:53.278Z,1513243613.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:53.660Z,1513243613.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:53.688Z,1513243613.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:54.041Z,1513243614.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:54.074Z,1513243614.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:54.090Z,1513243614.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:54.508Z,1513243614.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:54.523Z,1513243614.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:54.837Z,1513243614.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:54.870Z,1513243614.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:54.891Z,1513243614.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:55.242Z,1513243615.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:55.263Z,1513243615.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:55.286Z,1513243615.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:55.666Z,1513243615.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:55.680Z,1513243615.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:56.037Z,1513243616.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:56.071Z,1513243616.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:56.087Z,1513243616.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:56.501Z,1513243616.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:56.538Z,1513243616.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:56.833Z,1513243616.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:56.897Z,1513243616.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:56.929Z,1513243616.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:57.237Z,1513243617.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:57.269Z,1513243617.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:57.304Z,1513243617.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:57.670Z,1513243617.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:57.704Z,1513243617.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:58.033Z,1513243618.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:58.066Z,1513243618.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:58.080Z,1513243618.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:58.462Z,1513243618.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:58.477Z,1513243618.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:58.846Z,1513243618.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:58.909Z,1513243618.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:58.963Z,1513243618.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:59.249Z,1513243619.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:59.268Z,1513243619.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:59.283Z,1513243619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:26:59.663Z,1513243619.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:26:59.678Z,1513243619.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:00.051Z,1513243620.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:00.067Z,1513243620.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:00.090Z,1513243620.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:00.474Z,1513243620.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:00.491Z,1513243620.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:00.845Z,1513243620.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:00.879Z,1513243620.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:00.903Z,1513243620.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:01.250Z,1513243621.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:01.270Z,1513243621.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:01.352Z,1513243621.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:01.655Z,1513243621.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:01.680Z,1513243621.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:02.046Z,1513243622.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:02.082Z,1513243622.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:02.125Z,1513243622.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:02.489Z,1513243622.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:02.533Z,1513243622.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:02.841Z,1513243622.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:02.889Z,1513243622.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:02.903Z,1513243622.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:03.245Z,1513243623.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:03.281Z,1513243623.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:03.296Z,1513243623.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:03.680Z,1513243623.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:03.695Z,1513243623.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:04.042Z,1513243624.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:04.065Z,1513243624.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:04.091Z,1513243624.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:04.491Z,1513243624.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:04.522Z,1513243624.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:04.837Z,1513243624.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:04.867Z,1513243624.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:04.922Z,1513243624.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:05.241Z,1513243625.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:05.292Z,1513243625.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:05.354Z,1513243625.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:05.659Z,1513243625.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:05.675Z,1513243625.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:06.037Z,1513243626.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:06.078Z,1513243626.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:06.107Z,1513243626.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:06.499Z,1513243626.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:06.515Z,1513243626.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:06.833Z,1513243626.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:06.892Z,1513243626.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:06.907Z,1513243626.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:07.237Z,1513243627.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:07.263Z,1513243627.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:07.299Z,1513243627.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:07.661Z,1513243627.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:07.676Z,1513243627.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:08.033Z,1513243628.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:08.070Z,1513243628.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:08.101Z,1513243628.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:08.829Z,1513243628.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:09.626Z,1513243629.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:10.422Z,1513243630.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:11.218Z,1513243631.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:11.586Z,1513243631.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:11.738Z,1513243631.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:11.852Z,1513243631.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:11.896Z,1513243631.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:12.013Z,1513243632.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:12.233Z,1513243632.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:12.252Z,1513243632.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:12.632Z,1513243632.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:12.678Z,1513243632.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:12.811Z,1513243632.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:13.031Z,1513243633.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:13.051Z,1513243633.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:13.408Z,1513243633.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:13.477Z,1513243633.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:13.606Z,1513243633.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:13.808Z,1513243633.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:13.841Z,1513243633.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:14.206Z,1513243634.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:14.233Z,1513243634.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:14.402Z,1513243634.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:14.607Z,1513243634.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:14.622Z,1513243634.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:15.019Z,1513243635.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:15.067Z,1513243635.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:15.197Z,1513243635.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:15.418Z,1513243635.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:15.448Z,1513243635.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:15.828Z,1513243635.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:15.856Z,1513243635.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:15.994Z,1513243635.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:16.215Z,1513243636.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:16.230Z,1513243636.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:16.399Z,1513243636.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:16.612Z,1513243636.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:16.656Z,1513243636.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:16.809Z,1513243636.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.006Z,1513243637.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.039Z,1513243637.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:17.214Z,1513243637.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.417Z,1513243637.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.431Z,1513243637.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:17.617Z,1513243637.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.826Z,1513243637.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:17.841Z,1513243637.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:18.022Z,1513243638.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:18.227Z,1513243638.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:18.247Z,1513243638.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:18.627Z,1513243638.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:18.642Z,1513243638.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:18.817Z,1513243638.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:19.016Z,1513243639.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:19.031Z,1513243639.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:19.221Z,1513243639.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:19.404Z,1513243639.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:19.431Z,1513243639.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:19.808Z,1513243639.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:19.835Z,1513243639.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:20.017Z,1513243640.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:20.203Z,1513243640.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:20.234Z,1513243640.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:20.603Z,1513243640.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:20.640Z,1513243640.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:20.816Z,1513243640.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:21.040Z,1513243641.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:21.077Z,1513243641.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:21.221Z,1513243641.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:21.424Z,1513243641.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:21.446Z,1513243641.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:21.822Z,1513243641.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:21.880Z,1513243641.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:22.017Z,1513243642.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:22.211Z,1513243642.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:22.237Z,1513243642.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:22.603Z,1513243642.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:22.638Z,1513243642.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:22.815Z,1513243642.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:23.004Z,1513243643.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:23.036Z,1513243643.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:23.221Z,1513243643.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:23.407Z,1513243643.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:23.439Z,1513243643.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:23.814Z,1513243643.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:23.848Z,1513243643.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:24.018Z,1513243644.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:24.225Z,1513243644.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:24.247Z,1513243644.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:24.618Z,1513243644.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:24.645Z,1513243644.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:24.813Z,1513243644.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:25.007Z,1513243645.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:25.067Z,1513243645.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:25.217Z,1513243645.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:25.407Z,1513243645.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:25.442Z,1513243645.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:25.807Z,1513243645.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:25.845Z,1513243645.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:26.013Z,1513243646.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:26.208Z,1513243646.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:26.242Z,1513243646.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:26.611Z,1513243646.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:26.642Z,1513243646.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:26.810Z,1513243646.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:27.019Z,1513243647.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:27.046Z,1513243647.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:27.213Z,1513243647.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:27.441Z,1513243647.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:27.468Z,1513243647.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:27.821Z,1513243647.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:27.847Z,1513243647.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:28.010Z,1513243648.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:28.208Z,1513243648.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:28.222Z,1513243648.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:28.605Z,1513243648.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:28.620Z,1513243648.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:28.806Z,1513243648.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:29.010Z,1513243649.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:29.047Z,1513243649.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:29.209Z,1513243649.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:29.415Z,1513243649.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:29.430Z,1513243649.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:29.826Z,1513243649.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:29.856Z,1513243649.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:30.006Z,1513243650.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:30.221Z,1513243650.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:30.236Z,1513243650.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:30.657Z,1513243650.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:30.683Z,1513243650.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:30.802Z,1513243650.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:31.009Z,1513243651.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:31.036Z,1513243651.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:31.205Z,1513243651.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:31.413Z,1513243651.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:31.428Z,1513243651.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:31.812Z,1513243651.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:31.835Z,1513243651.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:32.002Z,1513243652.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:32.220Z,1513243652.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:32.240Z,1513243652.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:32.613Z,1513243652.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:32.635Z,1513243652.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:32.798Z,1513243652.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:33.018Z,1513243653.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:33.033Z,1513243653.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:33.201Z,1513243653.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:33.430Z,1513243653.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:33.444Z,1513243653.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:33.859Z,1513243653.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:33.944Z,1513243653.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:33.998Z,1513243653.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:34.226Z,1513243654.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:34.240Z,1513243654.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:34.607Z,1513243654.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:34.670Z,1513243654.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:34.793Z,1513243654.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:35.004Z,1513243655.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:35.035Z,1513243655.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:35.197Z,1513243655.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:35.407Z,1513243655.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:35.471Z,1513243655.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:35.828Z,1513243655.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:35.842Z,1513243655.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:35.994Z,1513243655.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:36.227Z,1513243656.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:36.241Z,1513243656.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:36.629Z,1513243656.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:36.651Z,1513243656.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:36.789Z,1513243656.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:37.003Z,1513243657.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:37.030Z,1513243657.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:37.194Z,1513243657.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:37.403Z,1513243657.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:37.434Z,1513243657.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:37.807Z,1513243657.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:37.834Z,1513243657.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:37.989Z,1513243657.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:38.198Z,1513243658.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:38.222Z,1513243658.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:38.603Z,1513243658.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:38.641Z,1513243658.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:38.785Z,1513243658.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:39.022Z,1513243659.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:39.048Z,1513243659.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:39.189Z,1513243659.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:39.422Z,1513243659.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:39.446Z,1513243659.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:39.816Z,1513243659.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:39.843Z,1513243659.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:39.985Z,1513243659.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:40.231Z,1513243660.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:40.250Z,1513243660.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:40.604Z,1513243660.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:40.636Z,1513243660.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:40.783Z,1513243660.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:41.003Z,1513243661.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:41.037Z,1513243661.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:41.193Z,1513243661.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:41.407Z,1513243661.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:41.440Z,1513243661.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:41.818Z,1513243661.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:41.841Z,1513243661.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:41.990Z,1513243661.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:42.233Z,1513243662.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:42.248Z,1513243662.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:42.632Z,1513243662.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:42.654Z,1513243662.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:42.787Z,1513243662.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:43.004Z,1513243663.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:43.039Z,1513243663.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:43.197Z,1513243663.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:43.461Z,1513243663.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:43.512Z,1513243663.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:43.804Z,1513243663.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:43.840Z,1513243663.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:43.993Z,1513243663.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:44.205Z,1513243664.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:44.232Z,1513243664.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:44.603Z,1513243664.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:44.644Z,1513243664.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:44.789Z,1513243664.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:45.019Z,1513243665.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:45.057Z,1513243665.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:45.193Z,1513243665.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:45.419Z,1513243665.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:45.456Z,1513243665.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:45.897Z,1513243665.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:45.938Z,1513243665.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:45.990Z,1513243665.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:46.207Z,1513243666.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:46.243Z,1513243666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:46.631Z,1513243666.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:46.663Z,1513243666.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:46.786Z,1513243666.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:47.014Z,1513243667.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:47.035Z,1513243667.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:47.189Z,1513243667.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:47.417Z,1513243667.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:47.433Z,1513243667.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:47.819Z,1513243667.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:47.835Z,1513243667.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:47.986Z,1513243667.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:48.221Z,1513243668.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:48.237Z,1513243668.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:48.634Z,1513243668.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:48.666Z,1513243668.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:48.781Z,1513243668.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:49.006Z,1513243669.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:49.040Z,1513243669.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:49.185Z,1513243669.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:49.416Z,1513243669.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:49.430Z,1513243669.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:49.843Z,1513243669.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:49.867Z,1513243669.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:49.982Z,1513243669.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:50.206Z,1513243670.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:50.238Z,1513243670.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:50.603Z,1513243670.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:50.628Z,1513243670.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:50.777Z,1513243670.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:51.030Z,1513243671.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:51.045Z,1513243671.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:51.181Z,1513243671.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:51.450Z,1513243671.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:51.520Z,1513243671.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:51.829Z,1513243671.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:51.844Z,1513243671.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:51.977Z,1513243671.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:52.256Z,1513243672.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:52.425Z,1513243672.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:52.603Z,1513243672.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:52.647Z,1513243672.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:52.775Z,1513243672.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:53.035Z,1513243673.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:53.063Z,1513243673.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:53.182Z,1513243673.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:53.410Z,1513243673.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:53.445Z,1513243673.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:53.822Z,1513243673.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:53.851Z,1513243673.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:53.981Z,1513243673.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:54.221Z,1513243674.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:54.244Z,1513243674.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:54.623Z,1513243674.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:54.648Z,1513243674.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:54.784Z,1513243674.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:55.015Z,1513243675.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:55.051Z,1513243675.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:55.193Z,1513243675.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:55.412Z,1513243675.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:55.494Z,1513243675.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:55.806Z,1513243675.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:55.833Z,1513243675.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:55.993Z,1513243675.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:56.240Z,1513243676.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:56.280Z,1513243676.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:56.622Z,1513243676.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:56.662Z,1513243676.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:56.791Z,1513243676.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:57.019Z,1513243677.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:57.034Z,1513243677.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:57.209Z,1513243677.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:57.422Z,1513243677.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:57.479Z,1513243677.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:57.818Z,1513243677.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:57.832Z,1513243677.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:58.005Z,1513243678.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:58.210Z,1513243678.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:58.226Z,1513243678.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:58.610Z,1513243678.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:58.637Z,1513243678.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:58.804Z,1513243678.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:59.014Z,1513243679.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:59.029Z,1513243679.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:59.209Z,1513243679.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:59.438Z,1513243679.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:59.473Z,1513243679.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:27:59.817Z,1513243679.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:27:59.832Z,1513243679.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:00.006Z,1513243680.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:00.217Z,1513243680.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:00.231Z,1513243680.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:00.622Z,1513243680.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:00.636Z,1513243680.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:00.801Z,1513243680.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:01.021Z,1513243681.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:01.129Z,1513243681.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:01.205Z,1513243681.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:01.415Z,1513243681.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:01.431Z,1513243681.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:01.809Z,1513243681.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:01.823Z,1513243681.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:02.002Z,1513243682.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:02.216Z,1513243682.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:02.231Z,1513243682.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:02.638Z,1513243682.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:02.713Z,1513243682.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:02.800Z,1513243682.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:03.022Z,1513243683.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:03.043Z,1513243683.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:03.205Z,1513243683.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:03.422Z,1513243683.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:03.440Z,1513243683.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:03.822Z,1513243683.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:03.836Z,1513243683.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:04.003Z,1513243684.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:04.200Z,1513243684.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:04.232Z,1513243684.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:04.603Z,1513243684.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:04.634Z,1513243684.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:04.797Z,1513243684.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:05.003Z,1513243685.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:05.035Z,1513243685.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:05.201Z,1513243685.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:05.411Z,1513243685.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:05.437Z,1513243685.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:05.879Z,1513243685.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:05.935Z,1513243685.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:05.998Z,1513243685.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:06.225Z,1513243686.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:06.247Z,1513243686.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:06.612Z,1513243686.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:06.651Z,1513243686.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:06.793Z,1513243686.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:07.009Z,1513243687.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:07.047Z,1513243687.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:07.197Z,1513243687.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:07.440Z,1513243687.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:07.455Z,1513243687.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:07.812Z,1513243687.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:07.840Z,1513243687.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:07.994Z,1513243687.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:08.210Z,1513243688.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:08.225Z,1513243688.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:08.790Z,1513243688.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:09.205Z,1513243689.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:10.001Z,1513243690.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:10.799Z,1513243690.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:11.209Z,1513243691.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:11.707Z,1513243691.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:11.722Z,1513243691.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:11.834Z,1513243691.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:11.875Z,1513243691.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:12.006Z,1513243692.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:12.240Z,1513243692.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:12.283Z,1513243692.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:12.618Z,1513243692.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:12.633Z,1513243692.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:12.801Z,1513243692.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:13.009Z,1513243693.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:13.023Z,1513243693.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:13.205Z,1513243693.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:13.398Z,1513243693.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:13.428Z,1513243693.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:13.808Z,1513243693.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:13.822Z,1513243693.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:14.002Z,1513243694.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:14.196Z,1513243694.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:14.235Z,1513243694.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:14.595Z,1513243694.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:14.627Z,1513243694.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:14.797Z,1513243694.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:15.018Z,1513243695.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:15.040Z,1513243695.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:15.201Z,1513243695.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:15.425Z,1513243695.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:15.456Z,1513243695.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:15.814Z,1513243695.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:15.843Z,1513243695.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:15.998Z,1513243695.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:16.202Z,1513243696.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:16.237Z,1513243696.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:16.602Z,1513243696.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:16.617Z,1513243696.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:16.793Z,1513243696.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:17.007Z,1513243697.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:17.023Z,1513243697.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:17.197Z,1513243697.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:17.405Z,1513243697.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:17.427Z,1513243697.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:17.818Z,1513243697.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:17.871Z,1513243697.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:17.994Z,1513243697.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:18.209Z,1513243698.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:18.278Z,1513243698.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:18.621Z,1513243698.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:18.649Z,1513243698.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:18.790Z,1513243698.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:19.011Z,1513243699.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:19.068Z,1513243699.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:19.193Z,1513243699.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:19.402Z,1513243699.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:19.423Z,1513243699.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:19.802Z,1513243699.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:19.849Z,1513243699.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:19.989Z,1513243699.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:20.201Z,1513243700.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:20.231Z,1513243700.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:20.603Z,1513243700.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:20.624Z,1513243700.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:20.785Z,1513243700.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:21.010Z,1513243701.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:21.049Z,1513243701.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:21.189Z,1513243701.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:21.418Z,1513243701.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:21.448Z,1513243701.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:21.827Z,1513243701.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:21.871Z,1513243701.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:21.989Z,1513243701.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:22.208Z,1513243702.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:22.223Z,1513243702.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:22.603Z,1513243702.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:22.619Z,1513243702.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:22.792Z,1513243702.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:23.002Z,1513243703.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:23.033Z,1513243703.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:23.197Z,1513243703.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:23.407Z,1513243703.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:23.423Z,1513243703.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:23.790Z,1513243703.790 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T09:28:23.790Z,1513243703.790 [NAL9602] Data Fault, FailCount= 4
2017-12-14T09:28:23.791Z,1513243703.791 [NAL9602](ERROR): Data Fault
2017-12-14T09:28:23.808Z,1513243703.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:23.842Z,1513243703.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:23.856Z,1513243703.856 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T09:28:23.994Z,1513243703.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:24.190Z,1513243704.190 [NAL9602](INFO): Powering down
2017-12-14T09:28:24.209Z,1513243704.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:24.223Z,1513243704.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:24.602Z,1513243704.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:24.617Z,1513243704.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:24.791Z,1513243704.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:25.023Z,1513243705.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:25.047Z,1513243705.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:25.076Z,1513243705.076 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T09:28:25.076Z,1513243705.076 [NAL9602] No Fault, FailCount= 4
2017-12-14T09:28:25.194Z,1513243705.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:25.394Z,1513243705.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:25.431Z,1513243705.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:25.788Z,1513243705.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:25.823Z,1513243705.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:25.989Z,1513243705.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:26.206Z,1513243706.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:26.227Z,1513243706.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:26.595Z,1513243706.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:26.631Z,1513243706.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:26.785Z,1513243706.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:26.994Z,1513243706.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:27.027Z,1513243707.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:27.189Z,1513243707.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:27.407Z,1513243707.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:27.427Z,1513243707.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:27.794Z,1513243707.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:27.819Z,1513243707.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:28.008Z,1513243708.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:28.219Z,1513243708.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:28.325Z,1513243708.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:28.611Z,1513243708.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:28.631Z,1513243708.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:28.801Z,1513243708.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:28.995Z,1513243708.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:29.026Z,1513243709.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:29.205Z,1513243709.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:29.398Z,1513243709.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:29.423Z,1513243709.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:29.799Z,1513243709.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:29.831Z,1513243709.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:30.002Z,1513243710.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:30.194Z,1513243710.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:30.230Z,1513243710.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:30.595Z,1513243710.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:30.627Z,1513243710.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:30.797Z,1513243710.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:30.996Z,1513243710.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:31.045Z,1513243711.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:31.201Z,1513243711.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:31.394Z,1513243711.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:31.480Z,1513243711.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:31.794Z,1513243711.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:31.830Z,1513243711.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:31.997Z,1513243711.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:32.195Z,1513243712.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:32.210Z,1513243712.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:32.603Z,1513243712.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:32.632Z,1513243712.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:32.793Z,1513243712.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:33.002Z,1513243713.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:33.039Z,1513243713.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:33.197Z,1513243713.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:33.399Z,1513243713.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:33.435Z,1513243713.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:33.795Z,1513243713.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:33.810Z,1513243713.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:33.993Z,1513243713.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:34.189Z,1513243714.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:34.204Z,1513243714.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:34.605Z,1513243714.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:34.620Z,1513243714.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:34.789Z,1513243714.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:35.007Z,1513243715.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:35.031Z,1513243715.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:35.193Z,1513243715.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:35.405Z,1513243715.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:35.427Z,1513243715.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:35.802Z,1513243715.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:35.825Z,1513243715.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:35.992Z,1513243715.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:36.203Z,1513243716.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:36.219Z,1513243716.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:36.607Z,1513243716.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:36.621Z,1513243716.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:36.818Z,1513243716.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:37.002Z,1513243717.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:37.025Z,1513243717.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:37.221Z,1513243717.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:37.404Z,1513243717.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:37.419Z,1513243717.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:37.805Z,1513243717.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:37.820Z,1513243717.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:38.017Z,1513243718.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:38.215Z,1513243718.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:38.239Z,1513243718.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:38.593Z,1513243718.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:38.628Z,1513243718.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:38.814Z,1513243718.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:38.995Z,1513243718.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:39.027Z,1513243719.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:39.217Z,1513243719.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:39.394Z,1513243719.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:39.421Z,1513243719.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:39.795Z,1513243719.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:39.826Z,1513243719.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:40.013Z,1513243720.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:40.199Z,1513243720.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:40.276Z,1513243720.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:40.594Z,1513243720.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:40.626Z,1513243720.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:40.811Z,1513243720.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:40.995Z,1513243720.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:41.031Z,1513243721.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:41.213Z,1513243721.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:41.465Z,1513243721.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:41.568Z,1513243721.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:41.798Z,1513243721.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:41.833Z,1513243721.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:42.010Z,1513243722.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:42.193Z,1513243722.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:42.243Z,1513243722.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:42.601Z,1513243722.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:42.627Z,1513243722.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:42.805Z,1513243722.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:43.003Z,1513243723.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:43.039Z,1513243723.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:43.209Z,1513243723.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:43.402Z,1513243723.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:43.440Z,1513243723.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:43.790Z,1513243723.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:43.804Z,1513243723.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:44.005Z,1513243724.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:44.192Z,1513243724.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:44.207Z,1513243724.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:44.646Z,1513243724.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:44.702Z,1513243724.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:44.802Z,1513243724.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:44.994Z,1513243724.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:45.037Z,1513243725.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:45.205Z,1513243725.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:45.394Z,1513243725.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:45.409Z,1513243725.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:45.798Z,1513243725.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:45.812Z,1513243725.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:46.001Z,1513243726.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:46.196Z,1513243726.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:46.210Z,1513243726.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:46.601Z,1513243726.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:46.615Z,1513243726.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:46.801Z,1513243726.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:47.000Z,1513243727.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:47.030Z,1513243727.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:47.205Z,1513243727.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:47.403Z,1513243727.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:47.418Z,1513243727.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:47.809Z,1513243727.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:47.864Z,1513243727.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:48.002Z,1513243728.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:48.194Z,1513243728.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:48.223Z,1513243728.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:48.595Z,1513243728.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:48.625Z,1513243728.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:48.801Z,1513243728.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:48.995Z,1513243728.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:49.029Z,1513243729.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:49.205Z,1513243729.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:49.394Z,1513243729.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:49.429Z,1513243729.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:49.792Z,1513243729.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:49.816Z,1513243729.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:50.001Z,1513243730.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:50.190Z,1513243730.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:50.231Z,1513243730.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:50.608Z,1513243730.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:50.661Z,1513243730.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:50.800Z,1513243730.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:51.007Z,1513243731.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:51.091Z,1513243731.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:51.205Z,1513243731.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:51.409Z,1513243731.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:51.431Z,1513243731.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:51.811Z,1513243731.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:51.826Z,1513243731.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:52.001Z,1513243732.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:52.206Z,1513243732.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:52.221Z,1513243732.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:52.610Z,1513243732.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:52.625Z,1513243732.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:52.800Z,1513243732.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:53.022Z,1513243733.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:53.112Z,1513243733.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:53.205Z,1513243733.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:53.394Z,1513243733.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:53.428Z,1513243733.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:53.792Z,1513243733.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:53.824Z,1513243733.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:54.003Z,1513243734.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:54.215Z,1513243734.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:54.271Z,1513243734.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:54.578Z,1513243734.578 [NAL9602](INFO): Powering up NAL9602
2017-12-14T09:28:54.595Z,1513243734.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:54.630Z,1513243734.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:54.797Z,1513243734.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:54.998Z,1513243734.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:55.027Z,1513243735.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:55.205Z,1513243735.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:55.396Z,1513243735.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:55.423Z,1513243735.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:55.799Z,1513243735.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:55.827Z,1513243735.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:56.003Z,1513243736.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:56.189Z,1513243736.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:56.212Z,1513243736.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:56.615Z,1513243736.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:56.630Z,1513243736.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:56.797Z,1513243736.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:56.995Z,1513243736.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:57.030Z,1513243737.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:57.201Z,1513243737.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:57.449Z,1513243737.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:57.475Z,1513243737.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:57.795Z,1513243737.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:57.827Z,1513243737.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:57.998Z,1513243737.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:58.202Z,1513243738.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:58.237Z,1513243738.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:58.599Z,1513243738.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:58.615Z,1513243738.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:58.793Z,1513243738.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:59.001Z,1513243739.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:59.016Z,1513243739.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:59.197Z,1513243739.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:59.399Z,1513243739.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:59.414Z,1513243739.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:59.798Z,1513243739.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:28:59.819Z,1513243739.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:28:59.994Z,1513243739.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:00.205Z,1513243740.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:00.220Z,1513243740.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:00.644Z,1513243740.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:00.703Z,1513243740.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:00.790Z,1513243740.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:01.001Z,1513243741.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:01.016Z,1513243741.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:01.193Z,1513243741.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:01.405Z,1513243741.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:01.426Z,1513243741.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:01.801Z,1513243741.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:01.815Z,1513243741.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:01.989Z,1513243741.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:02.203Z,1513243742.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:02.262Z,1513243742.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:02.604Z,1513243742.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:02.678Z,1513243742.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:02.785Z,1513243742.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:02.998Z,1513243742.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:03.038Z,1513243743.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:03.189Z,1513243743.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:03.406Z,1513243743.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:03.422Z,1513243743.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:03.818Z,1513243743.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:03.906Z,1513243743.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:03.986Z,1513243743.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:04.206Z,1513243744.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:04.227Z,1513243744.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:04.609Z,1513243744.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:04.666Z,1513243744.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:04.784Z,1513243744.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:05.026Z,1513243745.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:05.047Z,1513243745.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:05.193Z,1513243745.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:05.376Z,1513243745.376 [NAL9602](INFO): NAL9602 initialized
2017-12-14T09:29:05.392Z,1513243745.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:05.407Z,1513243745.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:05.799Z,1513243745.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:05.829Z,1513243745.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:05.989Z,1513243745.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:06.213Z,1513243746.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:06.247Z,1513243746.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:06.613Z,1513243746.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:06.640Z,1513243746.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:06.787Z,1513243746.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:07.037Z,1513243747.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:07.068Z,1513243747.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:07.198Z,1513243747.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:07.403Z,1513243747.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:07.417Z,1513243747.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:07.805Z,1513243747.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:07.820Z,1513243747.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:07.994Z,1513243747.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:08.204Z,1513243748.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:08.219Z,1513243748.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:08.605Z,1513243748.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:08.627Z,1513243748.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:08.789Z,1513243748.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:09.193Z,1513243749.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:09.989Z,1513243749.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:10.786Z,1513243750.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:11.189Z,1513243751.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:11.986Z,1513243751.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:12.062Z,1513243752.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:12.077Z,1513243752.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:12.108Z,1513243752.108 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:29:12.203Z,1513243752.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:12.246Z,1513243752.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:12.570Z,1513243752.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:12.585Z,1513243752.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:12.781Z,1513243752.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:12.952Z,1513243752.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:13.007Z,1513243753.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:13.185Z,1513243753.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:13.351Z,1513243753.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:13.367Z,1513243753.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:13.763Z,1513243753.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:13.778Z,1513243753.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:13.981Z,1513243753.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:14.165Z,1513243754.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:14.180Z,1513243754.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:14.565Z,1513243754.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:14.580Z,1513243754.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:14.777Z,1513243754.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:14.966Z,1513243754.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:14.981Z,1513243754.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:15.181Z,1513243755.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:15.350Z,1513243755.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:15.372Z,1513243755.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:15.749Z,1513243755.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:15.772Z,1513243755.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:15.978Z,1513243755.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:16.157Z,1513243756.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:16.171Z,1513243756.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:16.553Z,1513243756.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:16.588Z,1513243756.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:16.773Z,1513243756.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:16.963Z,1513243756.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:16.977Z,1513243756.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:17.177Z,1513243757.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:17.374Z,1513243757.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:17.395Z,1513243757.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:17.754Z,1513243757.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:17.783Z,1513243757.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:17.973Z,1513243757.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:18.147Z,1513243758.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:18.175Z,1513243758.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:18.543Z,1513243758.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:18.581Z,1513243758.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:18.771Z,1513243758.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:18.943Z,1513243758.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:18.974Z,1513243758.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:19.181Z,1513243759.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:19.326Z,1513243759.326 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T09:29:19.326Z,1513243759.326 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T09:29:19.326Z,1513243759.326 [DropWeight](ERROR): Hardware Fault
2017-12-14T09:29:19.344Z,1513243759.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:19.379Z,1513243759.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:19.417Z,1513243759.417 [CBIT](INFO): Critical error at 20171214T092919
2017-12-14T09:29:19.419Z,1513243759.419 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T09:29:19.419Z,1513243759.419 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T09:29:19.786Z,1513243759.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:19.840Z,1513243759.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:19.888Z,1513243759.888 [CBIT](INFO): Critical error at 20171214T092919
2017-12-14T09:29:19.977Z,1513243759.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:20.154Z,1513243760.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:20.181Z,1513243760.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:20.557Z,1513243760.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:20.595Z,1513243760.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:20.776Z,1513243760.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:20.962Z,1513243760.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:20.984Z,1513243760.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:21.185Z,1513243761.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:21.349Z,1513243761.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:21.364Z,1513243761.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:21.750Z,1513243761.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:21.767Z,1513243761.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:21.982Z,1513243761.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:22.153Z,1513243762.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:22.167Z,1513243762.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:22.552Z,1513243762.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:22.568Z,1513243762.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:22.780Z,1513243762.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:22.970Z,1513243762.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:23.011Z,1513243763.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:23.185Z,1513243763.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:23.373Z,1513243763.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:23.403Z,1513243763.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:23.754Z,1513243763.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:23.769Z,1513243763.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:23.982Z,1513243763.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:24.157Z,1513243764.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:24.172Z,1513243764.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:24.551Z,1513243764.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:24.567Z,1513243764.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:24.781Z,1513243764.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:24.951Z,1513243764.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:25.010Z,1513243765.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:25.185Z,1513243765.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:25.352Z,1513243765.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:25.422Z,1513243765.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:25.422Z,1513243765.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179
2017-12-14T09:29:25.422Z,1513243765.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:29:25.424Z,1513243765.424 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:25.424Z,1513243765.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 179
2017-12-14T09:29:25.424Z,1513243765.424 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:29:25.430Z,1513243765.430 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:25.431Z,1513243765.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179
2017-12-14T09:29:25.431Z,1513243765.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:29:25.451Z,1513243765.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:29:25.451Z,1513243765.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:29:25.451Z,1513243765.451 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:29:25.750Z,1513243765.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:25.775Z,1513243765.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:29:25.775Z,1513243765.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179
2017-12-14T09:29:25.776Z,1513243765.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:29:25.776Z,1513243765.776 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 179
2017-12-14T09:29:25.776Z,1513243765.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:29:25.776Z,1513243765.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179
2017-12-14T09:29:25.981Z,1513243765.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:26.194Z,1513243766.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:26.266Z,1513243766.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:29:26.266Z,1513243766.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:29:26.266Z,1513243766.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:29:26.267Z,1513243766.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:29:26.267Z,1513243766.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:29:26.268Z,1513243766.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:29:26.268Z,1513243766.268 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:29:26.268Z,1513243766.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:29:26.273Z,1513243766.273 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:29:26.567Z,1513243766.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:26.582Z,1513243766.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:26.777Z,1513243766.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:26.959Z,1513243766.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:27.011Z,1513243767.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:27.182Z,1513243767.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:27.339Z,1513243767.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:27.363Z,1513243767.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:27.742Z,1513243767.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:27.773Z,1513243767.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:27.978Z,1513243767.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:28.147Z,1513243768.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:28.173Z,1513243768.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:28.543Z,1513243768.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:28.576Z,1513243768.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:28.773Z,1513243768.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:28.957Z,1513243768.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:28.988Z,1513243768.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:29.177Z,1513243769.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:29.372Z,1513243769.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:29.450Z,1513243769.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:29.762Z,1513243769.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:29.783Z,1513243769.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:29.974Z,1513243769.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:30.150Z,1513243770.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:30.176Z,1513243770.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:30.545Z,1513243770.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:30.578Z,1513243770.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:30.769Z,1513243770.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:30.964Z,1513243770.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:30.983Z,1513243770.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:31.173Z,1513243771.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:31.345Z,1513243771.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:31.383Z,1513243771.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:31.741Z,1513243771.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:31.779Z,1513243771.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:31.970Z,1513243771.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:32.150Z,1513243772.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:32.187Z,1513243772.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:32.571Z,1513243772.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:32.631Z,1513243772.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:32.767Z,1513243772.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:32.983Z,1513243772.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:33.004Z,1513243773.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:33.201Z,1513243773.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:33.348Z,1513243773.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:33.376Z,1513243773.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:33.747Z,1513243773.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:33.763Z,1513243773.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:33.998Z,1513243773.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:34.153Z,1513243774.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:34.168Z,1513243774.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:34.551Z,1513243774.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:34.569Z,1513243774.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:34.794Z,1513243774.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:34.966Z,1513243774.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:35.001Z,1513243775.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:35.197Z,1513243775.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:35.361Z,1513243775.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:35.408Z,1513243775.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:35.754Z,1513243775.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:35.769Z,1513243775.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:35.993Z,1513243775.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:36.152Z,1513243776.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:36.167Z,1513243776.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:36.552Z,1513243776.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:36.568Z,1513243776.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:36.789Z,1513243776.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:36.952Z,1513243776.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:36.971Z,1513243776.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:37.193Z,1513243777.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:37.353Z,1513243777.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:37.368Z,1513243777.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:37.748Z,1513243777.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:37.775Z,1513243777.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:37.989Z,1513243777.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:38.154Z,1513243778.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:38.169Z,1513243778.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:38.557Z,1513243778.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:38.572Z,1513243778.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:38.785Z,1513243778.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:38.954Z,1513243778.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:39.003Z,1513243779.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:39.189Z,1513243779.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:39.351Z,1513243779.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:39.366Z,1513243779.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:39.750Z,1513243779.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:39.764Z,1513243779.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:39.987Z,1513243779.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:40.146Z,1513243780.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:40.178Z,1513243780.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:40.551Z,1513243780.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:40.566Z,1513243780.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:40.781Z,1513243780.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:40.973Z,1513243780.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:41.003Z,1513243781.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:41.185Z,1513243781.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:41.362Z,1513243781.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:41.377Z,1513243781.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:41.760Z,1513243781.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:41.776Z,1513243781.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:41.982Z,1513243781.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:42.190Z,1513243782.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:42.217Z,1513243782.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:42.543Z,1513243782.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:42.570Z,1513243782.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:42.777Z,1513243782.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:42.958Z,1513243782.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:42.974Z,1513243782.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:43.181Z,1513243783.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:43.343Z,1513243783.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:43.379Z,1513243783.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:43.743Z,1513243783.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:43.782Z,1513243783.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:43.977Z,1513243783.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:44.158Z,1513243784.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:44.185Z,1513243784.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:44.565Z,1513243784.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:44.587Z,1513243784.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:44.773Z,1513243784.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:44.957Z,1513243784.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:44.989Z,1513243784.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:45.177Z,1513243785.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:45.371Z,1513243785.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:45.399Z,1513243785.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:45.742Z,1513243785.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:45.779Z,1513243785.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:45.974Z,1513243785.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:46.144Z,1513243786.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:46.171Z,1513243786.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:46.554Z,1513243786.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:46.579Z,1513243786.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:46.771Z,1513243786.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:46.954Z,1513243786.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:46.981Z,1513243786.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:47.181Z,1513243787.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:47.357Z,1513243787.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:47.416Z,1513243787.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:47.762Z,1513243787.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:47.831Z,1513243787.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:47.977Z,1513243787.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:48.151Z,1513243788.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:48.182Z,1513243788.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:48.548Z,1513243788.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:48.639Z,1513243788.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:48.774Z,1513243788.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:48.959Z,1513243788.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:49.001Z,1513243789.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:49.189Z,1513243789.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:49.354Z,1513243789.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:49.399Z,1513243789.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:49.754Z,1513243789.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:49.768Z,1513243789.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:49.985Z,1513243789.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:50.155Z,1513243790.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:50.170Z,1513243790.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:50.559Z,1513243790.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:50.573Z,1513243790.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:50.781Z,1513243790.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:50.955Z,1513243790.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:50.995Z,1513243790.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:51.185Z,1513243791.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:51.350Z,1513243791.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:51.366Z,1513243791.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:51.752Z,1513243791.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:51.768Z,1513243791.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:51.982Z,1513243791.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:52.153Z,1513243792.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:52.168Z,1513243792.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:52.551Z,1513243792.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:52.572Z,1513243792.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:52.778Z,1513243792.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:52.955Z,1513243792.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:52.971Z,1513243792.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:53.185Z,1513243793.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:53.357Z,1513243793.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:53.397Z,1513243793.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:53.758Z,1513243793.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:53.772Z,1513243793.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:53.981Z,1513243793.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:54.151Z,1513243794.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:54.165Z,1513243794.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:54.553Z,1513243794.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:54.567Z,1513243794.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:54.778Z,1513243794.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:54.946Z,1513243794.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:54.979Z,1513243794.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:55.181Z,1513243795.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:55.351Z,1513243795.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:55.366Z,1513243795.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:55.749Z,1513243795.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:55.764Z,1513243795.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:55.978Z,1513243795.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:56.158Z,1513243796.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:56.177Z,1513243796.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:56.561Z,1513243796.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:56.575Z,1513243796.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:56.773Z,1513243796.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:56.963Z,1513243796.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:56.983Z,1513243796.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:57.177Z,1513243797.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:57.352Z,1513243797.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:57.366Z,1513243797.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:57.761Z,1513243797.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:57.810Z,1513243797.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:57.973Z,1513243797.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:58.190Z,1513243798.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:58.234Z,1513243798.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:58.553Z,1513243798.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:58.571Z,1513243798.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:58.769Z,1513243798.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:58.956Z,1513243798.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:58.983Z,1513243798.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:59.173Z,1513243799.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:59.366Z,1513243799.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:59.380Z,1513243799.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:59.766Z,1513243799.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:29:59.783Z,1513243799.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:29:59.969Z,1513243799.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:00.150Z,1513243800.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:00.166Z,1513243800.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:00.552Z,1513243800.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:00.571Z,1513243800.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:00.767Z,1513243800.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:00.949Z,1513243800.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:00.976Z,1513243800.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:01.178Z,1513243801.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:01.387Z,1513243801.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:01.420Z,1513243801.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:01.744Z,1513243801.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:01.780Z,1513243801.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:01.974Z,1513243801.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:02.164Z,1513243802.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:02.179Z,1513243802.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:02.566Z,1513243802.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:02.583Z,1513243802.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:02.771Z,1513243802.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:02.963Z,1513243802.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:02.978Z,1513243802.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:03.189Z,1513243803.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:03.342Z,1513243803.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:03.359Z,1513243803.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:03.749Z,1513243803.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:03.764Z,1513243803.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:03.986Z,1513243803.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:04.156Z,1513243804.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:04.192Z,1513243804.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:04.577Z,1513243804.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:04.596Z,1513243804.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:04.782Z,1513243804.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:04.966Z,1513243804.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:05.001Z,1513243805.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:05.185Z,1513243805.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:05.361Z,1513243805.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:05.376Z,1513243805.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:05.758Z,1513243805.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:05.773Z,1513243805.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:05.984Z,1513243805.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:06.152Z,1513243806.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:06.171Z,1513243806.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:06.559Z,1513243806.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:06.574Z,1513243806.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:06.777Z,1513243806.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:06.948Z,1513243806.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:06.972Z,1513243806.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:07.181Z,1513243807.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:07.354Z,1513243807.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:07.369Z,1513243807.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:07.756Z,1513243807.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:07.770Z,1513243807.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:07.978Z,1513243807.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:08.158Z,1513243808.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:08.173Z,1513243808.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:08.557Z,1513243808.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:08.572Z,1513243808.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:08.774Z,1513243808.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:08.959Z,1513243808.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:08.979Z,1513243808.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:09.177Z,1513243809.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:09.974Z,1513243809.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:10.769Z,1513243810.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:11.173Z,1513243811.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:11.970Z,1513243811.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:12.375Z,1513243812.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:12.521Z,1513243812.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:12.597Z,1513243812.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:12.635Z,1513243812.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:12.765Z,1513243812.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:12.999Z,1513243812.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:13.031Z,1513243813.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:13.169Z,1513243813.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:13.410Z,1513243813.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:13.478Z,1513243813.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:13.806Z,1513243813.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:13.830Z,1513243813.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:13.966Z,1513243813.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:14.187Z,1513243814.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:14.235Z,1513243814.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:14.591Z,1513243814.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:14.611Z,1513243814.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:14.763Z,1513243814.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:15.015Z,1513243815.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:15.047Z,1513243815.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:15.334Z,1513243815.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:15.390Z,1513243815.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:15.414Z,1513243815.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:15.803Z,1513243815.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:15.831Z,1513243815.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:16.129Z,1513243816.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:16.209Z,1513243816.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:16.224Z,1513243816.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:16.607Z,1513243816.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:16.623Z,1513243816.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:16.925Z,1513243816.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:17.008Z,1513243817.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:17.031Z,1513243817.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:17.329Z,1513243817.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:17.387Z,1513243817.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:17.424Z,1513243817.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:17.787Z,1513243817.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:17.813Z,1513243817.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:18.126Z,1513243818.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:18.205Z,1513243818.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:18.236Z,1513243818.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:18.610Z,1513243818.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:18.624Z,1513243818.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:18.861Z,1513243818.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:18.998Z,1513243818.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:19.036Z,1513243819.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:19.391Z,1513243819.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:19.427Z,1513243819.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:19.659Z,1513243819.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:19.791Z,1513243819.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:19.806Z,1513243819.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:20.191Z,1513243820.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:20.207Z,1513243820.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:20.454Z,1513243820.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:20.603Z,1513243820.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:20.634Z,1513243820.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:20.857Z,1513243820.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:21.005Z,1513243821.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:21.020Z,1513243821.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:21.410Z,1513243821.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:21.431Z,1513243821.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:21.653Z,1513243821.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:21.806Z,1513243821.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:21.821Z,1513243821.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:22.195Z,1513243822.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:22.224Z,1513243822.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:22.451Z,1513243822.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:22.608Z,1513243822.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:22.656Z,1513243822.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:22.857Z,1513243822.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:22.990Z,1513243822.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:23.014Z,1513243823.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:23.399Z,1513243823.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:23.414Z,1513243823.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:23.653Z,1513243823.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:23.790Z,1513243823.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:23.815Z,1513243823.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:24.208Z,1513243824.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:24.223Z,1513243824.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:24.451Z,1513243824.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:24.628Z,1513243824.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:24.659Z,1513243824.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:24.857Z,1513243824.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:25.008Z,1513243825.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:25.023Z,1513243825.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:25.387Z,1513243825.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:25.419Z,1513243825.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:25.653Z,1513243825.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:25.786Z,1513243825.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:25.812Z,1513243825.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:26.188Z,1513243826.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:26.223Z,1513243826.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:26.450Z,1513243826.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:26.608Z,1513243826.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:26.623Z,1513243826.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:26.889Z,1513243826.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:27.011Z,1513243827.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:27.031Z,1513243827.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:27.413Z,1513243827.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:27.427Z,1513243827.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:27.685Z,1513243827.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:27.827Z,1513243827.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:27.859Z,1513243827.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:28.187Z,1513243828.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:28.218Z,1513243828.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:28.481Z,1513243828.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:28.591Z,1513243828.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:28.627Z,1513243828.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:28.987Z,1513243828.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:29.027Z,1513243829.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:29.189Z,1513243829.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:29.392Z,1513243829.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:29.408Z,1513243829.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:29.795Z,1513243829.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:29.837Z,1513243829.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:29.985Z,1513243829.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:30.197Z,1513243830.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:30.236Z,1513243830.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:30.606Z,1513243830.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:30.635Z,1513243830.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:30.784Z,1513243830.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:31.042Z,1513243831.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:31.082Z,1513243831.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:31.194Z,1513243831.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:31.397Z,1513243831.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:31.412Z,1513243831.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:31.795Z,1513243831.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:31.815Z,1513243831.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:31.990Z,1513243831.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:32.196Z,1513243832.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:32.215Z,1513243832.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:32.594Z,1513243832.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:32.616Z,1513243832.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:32.785Z,1513243832.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:32.997Z,1513243832.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:33.012Z,1513243833.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:33.189Z,1513243833.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:33.409Z,1513243833.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:33.424Z,1513243833.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:33.802Z,1513243833.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:33.817Z,1513243833.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:33.986Z,1513243833.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:34.199Z,1513243834.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:34.255Z,1513243834.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:34.586Z,1513243834.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:34.664Z,1513243834.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:34.781Z,1513243834.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:35.006Z,1513243835.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:35.027Z,1513243835.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:35.185Z,1513243835.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:35.387Z,1513243835.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:35.414Z,1513243835.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:35.787Z,1513243835.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:35.839Z,1513243835.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:35.982Z,1513243835.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:36.202Z,1513243836.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:36.232Z,1513243836.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:36.609Z,1513243836.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:36.733Z,1513243836.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:36.777Z,1513243836.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:37.013Z,1513243837.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:37.035Z,1513243837.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:37.181Z,1513243837.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:37.417Z,1513243837.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:37.463Z,1513243837.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:37.786Z,1513243837.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:37.812Z,1513243837.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:37.978Z,1513243837.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:38.188Z,1513243838.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:38.212Z,1513243838.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:38.587Z,1513243838.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:38.623Z,1513243838.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:38.773Z,1513243838.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:38.996Z,1513243838.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:39.024Z,1513243839.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:39.177Z,1513243839.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:39.401Z,1513243839.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:39.428Z,1513243839.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:39.802Z,1513243839.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:39.831Z,1513243839.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:39.974Z,1513243839.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:40.186Z,1513243840.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:40.201Z,1513243840.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:40.630Z,1513243840.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:40.679Z,1513243840.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:40.770Z,1513243840.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:40.988Z,1513243840.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:41.002Z,1513243841.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:41.173Z,1513243841.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:41.395Z,1513243841.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:41.411Z,1513243841.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:41.794Z,1513243841.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:41.808Z,1513243841.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:41.970Z,1513243841.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:42.205Z,1513243842.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:42.236Z,1513243842.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:42.605Z,1513243842.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:42.628Z,1513243842.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:42.767Z,1513243842.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:43.009Z,1513243843.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:43.033Z,1513243843.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:43.197Z,1513243843.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:43.389Z,1513243843.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:43.404Z,1513243843.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:43.796Z,1513243843.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:43.867Z,1513243843.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:43.994Z,1513243843.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:44.195Z,1513243844.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:44.210Z,1513243844.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:44.595Z,1513243844.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:44.610Z,1513243844.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:44.791Z,1513243844.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:45.001Z,1513243845.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:45.053Z,1513243845.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:45.197Z,1513243845.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:45.405Z,1513243845.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:45.419Z,1513243845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:45.802Z,1513243845.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:45.817Z,1513243845.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:45.993Z,1513243845.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:46.192Z,1513243846.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:46.221Z,1513243846.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:46.596Z,1513243846.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:46.619Z,1513243846.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:46.789Z,1513243846.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:46.989Z,1513243846.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:47.020Z,1513243847.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:47.193Z,1513243847.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:47.387Z,1513243847.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:47.414Z,1513243847.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:47.787Z,1513243847.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:47.820Z,1513243847.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:47.990Z,1513243847.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:48.211Z,1513243848.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:48.231Z,1513243848.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:48.609Z,1513243848.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:48.626Z,1513243848.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:48.785Z,1513243848.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:49.005Z,1513243849.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:49.027Z,1513243849.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:49.189Z,1513243849.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:49.388Z,1513243849.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:49.414Z,1513243849.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:49.787Z,1513243849.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:49.819Z,1513243849.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:49.985Z,1513243849.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:50.215Z,1513243850.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:50.246Z,1513243850.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:50.594Z,1513243850.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:50.615Z,1513243850.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:50.781Z,1513243850.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:51.001Z,1513243851.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:51.016Z,1513243851.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:51.185Z,1513243851.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:51.402Z,1513243851.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:51.416Z,1513243851.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:51.806Z,1513243851.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:51.820Z,1513243851.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:51.982Z,1513243851.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:52.192Z,1513243852.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:52.220Z,1513243852.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:52.596Z,1513243852.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:52.612Z,1513243852.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:52.777Z,1513243852.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:52.993Z,1513243852.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:53.020Z,1513243853.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:53.181Z,1513243853.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:53.433Z,1513243853.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:53.469Z,1513243853.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:53.786Z,1513243853.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:53.821Z,1513243853.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:53.977Z,1513243853.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:54.210Z,1513243854.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:54.231Z,1513243854.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:54.622Z,1513243854.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:54.647Z,1513243854.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:54.773Z,1513243854.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:55.006Z,1513243855.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:55.029Z,1513243855.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:55.177Z,1513243855.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:55.392Z,1513243855.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:55.407Z,1513243855.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:55.790Z,1513243855.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:55.805Z,1513243855.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:55.974Z,1513243855.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:56.192Z,1513243856.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:56.211Z,1513243856.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:56.608Z,1513243856.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:56.647Z,1513243856.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:56.771Z,1513243856.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:57.005Z,1513243857.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:57.066Z,1513243857.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:57.209Z,1513243857.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:57.408Z,1513243857.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:57.472Z,1513243857.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:57.804Z,1513243857.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:57.819Z,1513243857.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:58.006Z,1513243858.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:58.195Z,1513243858.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:58.253Z,1513243858.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:58.596Z,1513243858.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:58.610Z,1513243858.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:58.802Z,1513243858.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:58.000Z,1513243859.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:59.058Z,1513243859.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:59.209Z,1513243859.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:59.394Z,1513243859.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:59.416Z,1513243859.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:30:59.795Z,1513243859.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:30:59.810Z,1513243859.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:00.005Z,1513243860.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:00.205Z,1513243860.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:00.220Z,1513243860.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:00.608Z,1513243860.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:00.627Z,1513243860.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:00.801Z,1513243860.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:01.010Z,1513243861.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:01.031Z,1513243861.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:01.205Z,1513243861.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:01.398Z,1513243861.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:01.413Z,1513243861.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:01.794Z,1513243861.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:01.810Z,1513243861.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:02.001Z,1513243862.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:02.196Z,1513243862.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:02.211Z,1513243862.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:02.606Z,1513243862.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:02.621Z,1513243862.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:02.797Z,1513243862.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:03.018Z,1513243863.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:03.051Z,1513243863.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:03.202Z,1513243863.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:03.401Z,1513243863.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:03.436Z,1513243863.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:03.802Z,1513243863.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:03.829Z,1513243863.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:03.998Z,1513243863.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:04.186Z,1513243864.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:04.201Z,1513243864.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:04.594Z,1513243864.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:04.621Z,1513243864.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:04.793Z,1513243864.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:04.990Z,1513243864.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:05.017Z,1513243865.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:05.197Z,1513243865.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:05.399Z,1513243865.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:05.413Z,1513243865.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:05.828Z,1513243865.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:05.850Z,1513243865.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:05.993Z,1513243865.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:06.231Z,1513243866.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:06.258Z,1513243866.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:06.609Z,1513243866.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:06.623Z,1513243866.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:06.789Z,1513243866.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:07.021Z,1513243867.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:07.043Z,1513243867.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:07.193Z,1513243867.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:07.386Z,1513243867.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:07.431Z,1513243867.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:07.792Z,1513243867.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:07.819Z,1513243867.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:07.822Z,1513243867.822 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:26:07.5Z
2017-12-14T09:31:07.823Z,1513243867.823 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:31:07.823Z,1513243867.823 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:31:07.990Z,1513243867.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:08.187Z,1513243868.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:08.220Z,1513243868.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:08.785Z,1513243868.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:08.984Z,1513243868.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:09.015Z,1513243869.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:09.122Z,1513243869.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:09.144Z,1513243869.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:09.189Z,1513243869.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:09.986Z,1513243869.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:10.783Z,1513243870.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:11.203Z,1513243871.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:11.997Z,1513243871.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:12.795Z,1513243872.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:12.934Z,1513243872.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:12.949Z,1513243872.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:13.025Z,1513243873.025 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0208.lzma
2017-12-14T09:31:13.062Z,1513243873.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:13.088Z,1513243873.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:13.217Z,1513243873.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:13.432Z,1513243873.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:13.446Z,1513243873.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:13.799Z,1513243873.799 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0208.lzma.bak
2017-12-14T09:31:13.800Z,1513243873.800 [DataOverHttps](INFO): SBD MOMSN=5438394
2017-12-14T09:31:13.841Z,1513243873.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:13.856Z,1513243873.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:14.013Z,1513243874.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:14.812Z,1513243874.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:15.062Z,1513243875.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:15.080Z,1513243875.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:15.184Z,1513243875.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:15.199Z,1513243875.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:15.217Z,1513243875.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:16.014Z,1513243876.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:16.811Z,1513243876.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:17.213Z,1513243877.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:18.011Z,1513243878.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:18.806Z,1513243878.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:19.209Z,1513243879.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:20.007Z,1513243880.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:20.802Z,1513243880.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:21.205Z,1513243881.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:21.395Z,1513243881.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:21.497Z,1513243881.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:21.639Z,1513243881.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:21.683Z,1513243881.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:22.003Z,1513243882.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:22.006Z,1513243882.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:22.043Z,1513243882.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:22.394Z,1513243882.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:22.436Z,1513243882.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:22.785Z,1513243882.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:22.798Z,1513243882.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:22.800Z,1513243882.800 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:31:22.800Z,1513243882.800 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:31:22.800Z,1513243882.800 [BPC1](ERROR): Communications Fault
2017-12-14T09:31:22.869Z,1513243882.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:22.900Z,1513243882.900 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:31:23.195Z,1513243883.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:23.201Z,1513243883.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:23.217Z,1513243883.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:23.998Z,1513243883.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:24.795Z,1513243884.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:25.225Z,1513243885.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:26.022Z,1513243886.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:26.818Z,1513243886.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:27.221Z,1513243887.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:28.018Z,1513243888.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:28.708Z,1513243888.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:28.725Z,1513243888.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:28.814Z,1513243888.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:29.217Z,1513243889.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:29.738Z,1513243889.738 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0209.lzma
2017-12-14T09:31:29.770Z,1513243889.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:29.791Z,1513243889.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:29.806Z,1513243889.806 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:31:29.806Z,1513243889.806 [BPC1] No Fault, FailCount= 1
2017-12-14T09:31:29.901Z,1513243889.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:29.990Z,1513243889.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:30.014Z,1513243890.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:30.630Z,1513243890.630 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0209.lzma.bak
2017-12-14T09:31:30.630Z,1513243890.630 [DataOverHttps](INFO): SBD MOMSN=5438398
2017-12-14T09:31:30.676Z,1513243890.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:30.726Z,1513243890.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:30.809Z,1513243890.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:31.213Z,1513243891.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:32.010Z,1513243892.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:32.806Z,1513243892.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:33.209Z,1513243893.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:34.006Z,1513243894.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:34.803Z,1513243894.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:35.205Z,1513243895.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:36.002Z,1513243896.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:36.798Z,1513243896.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:37.201Z,1513243897.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:37.998Z,1513243897.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:38.794Z,1513243898.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:39.217Z,1513243899.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:40.014Z,1513243900.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:40.810Z,1513243900.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:41.213Z,1513243901.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:42.010Z,1513243902.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:42.805Z,1513243902.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:43.209Z,1513243903.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:44.005Z,1513243904.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:44.801Z,1513243904.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:45.205Z,1513243905.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:46.001Z,1513243906.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:46.797Z,1513243906.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:47.201Z,1513243907.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:47.997Z,1513243907.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:48.813Z,1513243908.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:49.217Z,1513243909.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:50.013Z,1513243910.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:50.809Z,1513243910.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:51.213Z,1513243911.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:52.009Z,1513243912.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:52.806Z,1513243912.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:53.209Z,1513243913.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:54.006Z,1513243914.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:54.802Z,1513243914.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:55.205Z,1513243915.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:56.002Z,1513243916.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:56.504Z,1513243916.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:56.555Z,1513243916.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:56.558Z,1513243916.558 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:31:56.558Z,1513243916.558 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:31:56.558Z,1513243916.558 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:31:56.652Z,1513243916.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:56.708Z,1513243916.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:31:56.797Z,1513243916.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:57.201Z,1513243917.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:57.998Z,1513243917.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:58.793Z,1513243918.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:59.197Z,1513243919.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:31:59.993Z,1513243919.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:00.253Z,1513243920.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:00.268Z,1513243920.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:00.378Z,1513243920.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:00.464Z,1513243920.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:00.770Z,1513243920.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:00.784Z,1513243920.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:00.790Z,1513243920.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:01.156Z,1513243921.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:01.183Z,1513243921.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:01.193Z,1513243921.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:01.552Z,1513243921.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:01.579Z,1513243921.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:01.948Z,1513243921.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:01.990Z,1513243921.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:02.005Z,1513243922.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:02.352Z,1513243922.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:02.381Z,1513243922.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:02.744Z,1513243922.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:02.761Z,1513243922.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:02.785Z,1513243922.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:03.176Z,1513243923.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:03.190Z,1513243923.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:03.214Z,1513243923.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:03.569Z,1513243923.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:03.599Z,1513243923.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:03.978Z,1513243923.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:03.986Z,1513243923.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:04.017Z,1513243924.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:04.366Z,1513243924.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:04.382Z,1513243924.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:04.755Z,1513243924.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:04.779Z,1513243924.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:04.781Z,1513243924.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.160Z,1513243925.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.175Z,1513243925.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:05.185Z,1513243925.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.559Z,1513243925.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.579Z,1513243925.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:05.967Z,1513243925.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.981Z,1513243925.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:05.988Z,1513243925.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:06.366Z,1513243926.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:06.387Z,1513243926.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:06.780Z,1513243926.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:06.806Z,1513243926.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:06.903Z,1513243926.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:07.178Z,1513243927.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:07.233Z,1513243927.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:07.256Z,1513243927.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:07.563Z,1513243927.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:07.594Z,1513243927.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:07.975Z,1513243927.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:08.012Z,1513243928.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:08.034Z,1513243928.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:08.358Z,1513243928.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:08.373Z,1513243928.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:08.792Z,1513243928.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:08.830Z,1513243928.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:08.874Z,1513243928.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:09.172Z,1513243929.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:09.187Z,1513243929.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:09.233Z,1513243929.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:09.570Z,1513243929.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:09.619Z,1513243929.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:09.970Z,1513243929.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:09.986Z,1513243929.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:10.030Z,1513243930.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:10.347Z,1513243930.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:10.472Z,1513243930.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:10.756Z,1513243930.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:10.779Z,1513243930.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:10.825Z,1513243930.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:11.162Z,1513243931.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:11.177Z,1513243931.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:11.229Z,1513243931.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:11.556Z,1513243931.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:11.575Z,1513243931.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:11.967Z,1513243931.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:11.982Z,1513243931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:12.025Z,1513243932.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:12.363Z,1513243932.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:12.387Z,1513243932.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:12.770Z,1513243932.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:12.784Z,1513243932.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:12.822Z,1513243932.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:13.155Z,1513243933.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:13.183Z,1513243933.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:13.225Z,1513243933.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:13.552Z,1513243933.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:13.583Z,1513243933.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:13.956Z,1513243933.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:13.979Z,1513243933.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:14.022Z,1513243934.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:14.358Z,1513243934.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:14.373Z,1513243934.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:14.751Z,1513243934.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:14.773Z,1513243934.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:14.817Z,1513243934.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:15.167Z,1513243935.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:15.182Z,1513243935.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:15.221Z,1513243935.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:15.567Z,1513243935.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:15.582Z,1513243935.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:15.960Z,1513243935.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:15.987Z,1513243935.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:16.018Z,1513243936.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:16.362Z,1513243936.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:16.377Z,1513243936.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:16.793Z,1513243936.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:16.814Z,1513243936.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:16.831Z,1513243936.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:17.148Z,1513243937.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:17.175Z,1513243937.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:17.217Z,1513243937.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:17.547Z,1513243937.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:17.592Z,1513243937.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:17.973Z,1513243937.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:18.014Z,1513243938.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:18.018Z,1513243938.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:18.372Z,1513243938.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:18.427Z,1513243938.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:18.779Z,1513243938.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:18.794Z,1513243938.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:18.809Z,1513243938.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:19.147Z,1513243939.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:19.191Z,1513243939.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:19.213Z,1513243939.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:19.548Z,1513243939.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:19.572Z,1513243939.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:20.002Z,1513243940.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:20.010Z,1513243940.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:20.042Z,1513243940.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:20.354Z,1513243940.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:20.390Z,1513243940.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:20.760Z,1513243940.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:20.806Z,1513243940.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:20.838Z,1513243940.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:21.174Z,1513243941.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:21.201Z,1513243941.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:21.221Z,1513243941.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:21.566Z,1513243941.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:21.599Z,1513243941.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:21.962Z,1513243941.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:21.992Z,1513243941.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:22.018Z,1513243942.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:22.357Z,1513243942.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:22.371Z,1513243942.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:22.814Z,1513243942.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:22.829Z,1513243942.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:22.864Z,1513243942.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:23.203Z,1513243943.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:23.218Z,1513243943.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:23.228Z,1513243943.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:23.555Z,1513243943.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:23.582Z,1513243943.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:23.967Z,1513243943.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:23.987Z,1513243943.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:24.014Z,1513243944.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:24.365Z,1513243944.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:24.381Z,1513243944.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:24.766Z,1513243944.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:24.811Z,1513243944.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:24.852Z,1513243944.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:25.148Z,1513243945.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:25.184Z,1513243945.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:25.217Z,1513243945.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:25.551Z,1513243945.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:25.577Z,1513243945.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:25.955Z,1513243945.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:25.988Z,1513243945.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:26.014Z,1513243946.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:26.382Z,1513243946.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:26.473Z,1513243946.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:26.473Z,1513243946.473 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180
2017-12-14T09:32:26.473Z,1513243946.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:32:26.490Z,1513243946.490 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:26.490Z,1513243946.490 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 180
2017-12-14T09:32:26.490Z,1513243946.490 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:32:26.492Z,1513243946.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:26.492Z,1513243946.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180
2017-12-14T09:32:26.492Z,1513243946.492 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:32:26.554Z,1513243946.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:32:26.554Z,1513243946.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:32:26.554Z,1513243946.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:32:26.756Z,1513243946.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:26.782Z,1513243946.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:32:26.782Z,1513243946.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180
2017-12-14T09:32:26.782Z,1513243946.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:32:26.782Z,1513243946.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 180
2017-12-14T09:32:26.783Z,1513243946.783 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:32:26.783Z,1513243946.783 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180
2017-12-14T09:32:26.809Z,1513243946.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:27.170Z,1513243947.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:27.184Z,1513243947.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:32:27.184Z,1513243947.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:32:27.184Z,1513243947.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:32:27.185Z,1513243947.185 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:32:27.185Z,1513243947.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:32:27.186Z,1513243947.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:32:27.186Z,1513243947.186 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:32:27.186Z,1513243947.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:32:27.187Z,1513243947.187 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:32:27.213Z,1513243947.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:27.574Z,1513243947.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:27.595Z,1513243947.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:27.969Z,1513243947.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:28.010Z,1513243948.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:28.035Z,1513243948.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:28.348Z,1513243948.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:28.373Z,1513243948.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:28.747Z,1513243948.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:28.803Z,1513243948.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:28.806Z,1513243948.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:29.160Z,1513243949.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:29.197Z,1513243949.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:29.209Z,1513243949.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:29.553Z,1513243949.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:29.604Z,1513243949.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:29.966Z,1513243949.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:29.989Z,1513243949.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:30.006Z,1513243950.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:30.379Z,1513243950.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:30.463Z,1513243950.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:30.765Z,1513243950.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:30.801Z,1513243950.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:30.802Z,1513243950.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:31.155Z,1513243951.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:31.206Z,1513243951.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:31.555Z,1513243951.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:31.591Z,1513243951.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:31.598Z,1513243951.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:31.953Z,1513243951.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:31.968Z,1513243951.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:32.093Z,1513243952.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:32.351Z,1513243952.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:32.371Z,1513243952.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:32.752Z,1513243952.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:32.767Z,1513243952.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:32.890Z,1513243952.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:33.166Z,1513243953.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:33.189Z,1513243953.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:33.562Z,1513243953.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:33.583Z,1513243953.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:33.685Z,1513243953.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:33.962Z,1513243953.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:33.977Z,1513243953.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:34.355Z,1513243954.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:34.386Z,1513243954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:34.481Z,1513243954.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:34.794Z,1513243954.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:34.847Z,1513243954.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:35.152Z,1513243955.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:35.183Z,1513243955.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:35.205Z,1513243955.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:35.548Z,1513243955.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:35.584Z,1513243955.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:35.959Z,1513243955.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:35.995Z,1513243955.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:36.002Z,1513243956.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:36.362Z,1513243956.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:36.399Z,1513243956.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:36.798Z,1513243956.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:36.811Z,1513243956.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:36.842Z,1513243956.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:37.159Z,1513243957.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:37.190Z,1513243957.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:37.201Z,1513243957.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:37.555Z,1513243957.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:37.575Z,1513243957.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:37.958Z,1513243957.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:37.973Z,1513243957.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:37.998Z,1513243957.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:38.350Z,1513243958.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:38.377Z,1513243958.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:38.752Z,1513243958.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:38.774Z,1513243958.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:38.805Z,1513243958.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:39.158Z,1513243959.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:39.174Z,1513243959.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:39.209Z,1513243959.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:39.593Z,1513243959.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:39.657Z,1513243959.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:39.958Z,1513243959.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:39.973Z,1513243959.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:40.006Z,1513243960.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:40.357Z,1513243960.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:40.372Z,1513243960.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:40.747Z,1513243960.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:40.785Z,1513243960.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:40.805Z,1513243960.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:41.148Z,1513243961.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:41.175Z,1513243961.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:41.209Z,1513243961.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:41.548Z,1513243961.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:41.600Z,1513243961.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:41.968Z,1513243961.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:41.987Z,1513243961.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:42.006Z,1513243962.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:42.375Z,1513243962.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:42.419Z,1513243962.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:42.759Z,1513243962.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:42.786Z,1513243962.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:42.802Z,1513243962.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:43.152Z,1513243963.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:43.197Z,1513243963.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:43.205Z,1513243963.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:43.552Z,1513243963.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:43.597Z,1513243963.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:43.954Z,1513243963.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:43.969Z,1513243963.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:44.002Z,1513243964.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:44.350Z,1513243964.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:44.364Z,1513243964.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:44.762Z,1513243964.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:44.777Z,1513243964.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:44.798Z,1513243964.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:45.164Z,1513243965.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:45.194Z,1513243965.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:45.201Z,1513243965.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:45.570Z,1513243965.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:45.584Z,1513243965.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:45.985Z,1513243965.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:45.998Z,1513243965.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:46.066Z,1513243966.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:46.356Z,1513243966.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:46.379Z,1513243966.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:46.747Z,1513243966.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:46.774Z,1513243966.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:46.819Z,1513243966.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:47.159Z,1513243967.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:47.174Z,1513243967.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:47.225Z,1513243967.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:47.551Z,1513243967.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:47.581Z,1513243967.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:47.967Z,1513243967.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:47.982Z,1513243967.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:48.022Z,1513243968.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:48.369Z,1513243968.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:48.385Z,1513243968.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:48.818Z,1513243968.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:48.852Z,1513243968.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:48.867Z,1513243968.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:49.157Z,1513243969.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:49.196Z,1513243969.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:49.225Z,1513243969.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:49.564Z,1513243969.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:49.579Z,1513243969.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:49.957Z,1513243969.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:49.971Z,1513243969.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:50.021Z,1513243970.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:50.356Z,1513243970.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:50.419Z,1513243970.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:50.819Z,1513243970.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:50.827Z,1513243970.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:50.866Z,1513243970.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:51.167Z,1513243971.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:51.182Z,1513243971.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:51.221Z,1513243971.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:51.571Z,1513243971.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:51.586Z,1513243971.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:51.974Z,1513243971.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:51.989Z,1513243971.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:52.018Z,1513243972.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:52.378Z,1513243972.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:52.484Z,1513243972.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:52.752Z,1513243972.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:52.771Z,1513243972.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:52.813Z,1513243972.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:53.159Z,1513243973.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:53.174Z,1513243973.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:53.217Z,1513243973.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:53.548Z,1513243973.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:53.589Z,1513243973.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:53.954Z,1513243973.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:53.981Z,1513243973.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:54.014Z,1513243974.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:54.376Z,1513243974.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:54.465Z,1513243974.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:54.766Z,1513243974.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:54.784Z,1513243974.784 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:32:54.784Z,1513243974.784 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:32:54.784Z,1513243974.784 [BPC1](ERROR): Communications Fault
2017-12-14T09:32:54.795Z,1513243974.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:54.808Z,1513243974.808 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:32:54.809Z,1513243974.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:55.159Z,1513243975.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:55.195Z,1513243975.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:55.213Z,1513243975.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:55.556Z,1513243975.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:55.572Z,1513243975.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:55.957Z,1513243975.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:55.975Z,1513243975.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:56.009Z,1513243976.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:56.025Z,1513243976.025 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:32:56.025Z,1513243976.025 [BPC1] No Fault, FailCount= 1
2017-12-14T09:32:56.355Z,1513243976.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:56.484Z,1513243976.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:56.761Z,1513243976.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:56.776Z,1513243976.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:56.805Z,1513243976.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:57.167Z,1513243977.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:57.192Z,1513243977.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:32:57.209Z,1513243977.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:58.006Z,1513243978.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:58.802Z,1513243978.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:32:59.205Z,1513243979.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:00.001Z,1513243980.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:00.718Z,1513243980.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:00.733Z,1513243980.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:00.799Z,1513243980.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:00.934Z,1513243980.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:00.970Z,1513243980.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:01.186Z,1513243981.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:01.201Z,1513243981.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:01.223Z,1513243981.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:01.590Z,1513243981.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:01.612Z,1513243981.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:01.998Z,1513243981.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:02.001Z,1513243982.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:02.040Z,1513243982.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:02.398Z,1513243982.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:02.413Z,1513243982.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:02.793Z,1513243982.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:02.822Z,1513243982.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:02.866Z,1513243982.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:03.195Z,1513243983.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:03.197Z,1513243983.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:03.224Z,1513243983.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:03.594Z,1513243983.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:03.620Z,1513243983.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:03.994Z,1513243983.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:03.994Z,1513243983.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:04.025Z,1513243984.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:04.372Z,1513243984.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:04.387Z,1513243984.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:04.790Z,1513243984.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:04.818Z,1513243984.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:04.872Z,1513243984.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:05.194Z,1513243985.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:05.238Z,1513243985.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:05.264Z,1513243985.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:05.593Z,1513243985.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:05.608Z,1513243985.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:05.991Z,1513243985.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:05.999Z,1513243985.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:06.014Z,1513243986.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:06.450Z,1513243986.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:06.473Z,1513243986.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:06.786Z,1513243986.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:06.793Z,1513243986.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:06.809Z,1513243986.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:07.187Z,1513243987.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:07.190Z,1513243987.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:07.207Z,1513243987.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:07.592Z,1513243987.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:07.700Z,1513243987.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:07.975Z,1513243987.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:07.986Z,1513243987.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:08.007Z,1513243988.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:08.480Z,1513243988.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:08.524Z,1513243988.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:08.781Z,1513243988.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:08.789Z,1513243988.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:08.823Z,1513243988.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:09.185Z,1513243989.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:09.205Z,1513243989.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:09.220Z,1513243989.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:09.601Z,1513243989.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:09.615Z,1513243989.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:09.982Z,1513243989.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:10.008Z,1513243990.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:10.023Z,1513243990.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:10.427Z,1513243990.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:10.487Z,1513243990.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:10.778Z,1513243990.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:10.785Z,1513243990.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:10.831Z,1513243990.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:11.182Z,1513243991.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:11.185Z,1513243991.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:11.216Z,1513243991.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:11.583Z,1513243991.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:11.623Z,1513243991.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:11.978Z,1513243991.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:12.001Z,1513243992.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:12.035Z,1513243992.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:12.432Z,1513243992.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:12.480Z,1513243992.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:12.773Z,1513243992.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:12.793Z,1513243992.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:12.812Z,1513243992.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:13.177Z,1513243993.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:13.193Z,1513243993.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:13.208Z,1513243993.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:13.589Z,1513243993.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:13.604Z,1513243993.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:13.979Z,1513243993.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:13.982Z,1513243993.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:14.015Z,1513243994.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:14.394Z,1513243994.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:14.408Z,1513243994.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:14.774Z,1513243994.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:14.801Z,1513243994.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:14.810Z,1513243994.810 [BPC1](ERROR): Failed to parse message.
2017-12-14T09:33:14.810Z,1513243994.810 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T09:33:14.810Z,1513243994.810 [BPC1] Data Fault, FailCount= 2
2017-12-14T09:33:14.810Z,1513243994.810 [BPC1](ERROR): Data Fault
2017-12-14T09:33:14.822Z,1513243994.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:14.861Z,1513243994.861 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:33:15.177Z,1513243995.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:15.189Z,1513243995.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:15.206Z,1513243995.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:15.601Z,1513243995.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:15.632Z,1513243995.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:15.973Z,1513243995.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:15.994Z,1513243995.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:16.009Z,1513243996.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:16.035Z,1513243996.035 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:33:16.035Z,1513243996.035 [BPC1] No Fault, FailCount= 2
2017-12-14T09:33:16.389Z,1513243996.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:16.455Z,1513243996.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:16.771Z,1513243996.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:16.821Z,1513243996.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:16.860Z,1513243996.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:17.189Z,1513243997.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:17.197Z,1513243997.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:17.219Z,1513243997.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:17.594Z,1513243997.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:17.610Z,1513243997.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:17.986Z,1513243997.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:18.018Z,1513243998.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:18.067Z,1513243998.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:18.400Z,1513243998.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:18.428Z,1513243998.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:18.785Z,1513243998.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:18.835Z,1513243998.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:18.864Z,1513243998.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:19.179Z,1513243999.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:19.205Z,1513243999.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:19.214Z,1513243999.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:19.582Z,1513243999.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:19.614Z,1513243999.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:19.982Z,1513243999.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:20.002Z,1513244000.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:20.020Z,1513244000.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:20.379Z,1513244000.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:20.482Z,1513244000.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:20.785Z,1513244000.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:20.798Z,1513244000.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:20.803Z,1513244000.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:21.202Z,1513244001.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:21.239Z,1513244001.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:21.278Z,1513244001.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:21.594Z,1513244001.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:21.611Z,1513244001.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:21.989Z,1513244001.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:21.998Z,1513244001.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:22.006Z,1513244002.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:22.407Z,1513244002.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:22.482Z,1513244002.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:22.788Z,1513244002.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:22.793Z,1513244002.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:22.806Z,1513244002.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:23.189Z,1513244003.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:23.197Z,1513244003.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:23.205Z,1513244003.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:23.596Z,1513244003.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:23.611Z,1513244003.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:23.994Z,1513244003.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:23.998Z,1513244003.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:24.013Z,1513244004.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:24.463Z,1513244004.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:24.543Z,1513244004.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:24.790Z,1513244004.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:24.798Z,1513244004.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:24.820Z,1513244004.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:25.192Z,1513244005.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:25.193Z,1513244005.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:25.208Z,1513244005.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:25.593Z,1513244005.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:25.608Z,1513244005.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:25.992Z,1513244005.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:25.993Z,1513244005.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:26.008Z,1513244006.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:26.441Z,1513244006.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:26.472Z,1513244006.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:26.777Z,1513244006.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:26.786Z,1513244006.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:26.815Z,1513244006.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:27.190Z,1513244007.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:27.206Z,1513244007.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:27.227Z,1513244007.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:27.603Z,1513244007.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:27.618Z,1513244007.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:27.988Z,1513244007.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:27.990Z,1513244007.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:28.034Z,1513244008.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:28.388Z,1513244008.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:28.415Z,1513244008.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:28.778Z,1513244008.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:28.789Z,1513244008.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:28.818Z,1513244008.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:29.183Z,1513244009.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:29.193Z,1513244009.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:29.214Z,1513244009.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:29.579Z,1513244009.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:29.607Z,1513244009.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:29.991Z,1513244009.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:30.007Z,1513244010.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:30.022Z,1513244010.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:30.389Z,1513244010.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:30.420Z,1513244010.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:30.787Z,1513244010.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:30.841Z,1513244010.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:30.888Z,1513244010.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:31.188Z,1513244011.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:31.207Z,1513244011.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:31.217Z,1513244011.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:31.590Z,1513244011.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:31.605Z,1513244011.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:31.990Z,1513244011.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:32.011Z,1513244012.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:32.022Z,1513244012.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:32.390Z,1513244012.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:32.404Z,1513244012.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:32.826Z,1513244012.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:32.831Z,1513244012.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:32.858Z,1513244012.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:33.206Z,1513244013.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:33.229Z,1513244013.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:33.240Z,1513244013.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:33.597Z,1513244013.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:33.612Z,1513244013.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:33.999Z,1513244013.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:34.015Z,1513244014.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:34.034Z,1513244014.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:34.379Z,1513244014.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:34.479Z,1513244014.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:34.790Z,1513244014.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:34.804Z,1513244014.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:34.830Z,1513244014.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:35.189Z,1513244015.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:35.204Z,1513244015.204 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T09:33:35.204Z,1513244015.204 [BPC1] Data Fault, FailCount= 3
2017-12-14T09:33:35.205Z,1513244015.205 [BPC1](ERROR): Data Fault
2017-12-14T09:33:35.213Z,1513244015.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:35.233Z,1513244015.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:35.248Z,1513244015.248 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:33:35.587Z,1513244015.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:35.604Z,1513244015.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:35.994Z,1513244015.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:36.009Z,1513244016.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:36.030Z,1513244016.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:36.418Z,1513244016.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:36.484Z,1513244016.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:36.505Z,1513244016.505 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:33:36.505Z,1513244016.505 [BPC1] No Fault, FailCount= 3
2017-12-14T09:33:36.798Z,1513244016.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:36.826Z,1513244016.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:36.883Z,1513244016.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:37.206Z,1513244017.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:37.229Z,1513244017.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:37.246Z,1513244017.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:37.588Z,1513244017.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:37.604Z,1513244017.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:37.982Z,1513244017.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:38.004Z,1513244018.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:38.026Z,1513244018.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:38.440Z,1513244018.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:38.484Z,1513244018.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:38.774Z,1513244018.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:38.803Z,1513244018.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:38.821Z,1513244018.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:39.202Z,1513244019.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:39.216Z,1513244019.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:39.225Z,1513244019.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:39.597Z,1513244019.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:39.765Z,1513244019.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:39.994Z,1513244019.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:40.009Z,1513244020.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:40.030Z,1513244020.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:40.462Z,1513244020.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:40.493Z,1513244020.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:40.788Z,1513244020.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:40.802Z,1513244020.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:40.850Z,1513244020.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:41.194Z,1513244021.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:41.209Z,1513244021.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:41.253Z,1513244021.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:41.582Z,1513244021.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:41.608Z,1513244021.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:42.001Z,1513244022.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:42.016Z,1513244022.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:42.050Z,1513244022.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:42.398Z,1513244022.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:42.412Z,1513244022.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:42.797Z,1513244022.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:42.821Z,1513244022.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:42.845Z,1513244022.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:43.183Z,1513244023.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:43.218Z,1513244023.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:43.249Z,1513244023.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:43.589Z,1513244023.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:43.603Z,1513244023.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:43.987Z,1513244023.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:44.004Z,1513244024.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:44.046Z,1513244024.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:44.387Z,1513244024.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:44.401Z,1513244024.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:44.814Z,1513244024.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:44.842Z,1513244024.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:44.858Z,1513244024.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:45.199Z,1513244025.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:45.245Z,1513244025.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:45.259Z,1513244025.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:45.609Z,1513244025.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:45.624Z,1513244025.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:46.000Z,1513244026.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:46.015Z,1513244026.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:46.042Z,1513244026.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:46.383Z,1513244026.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:46.417Z,1513244026.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:46.838Z,1513244026.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:46.846Z,1513244026.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:46.872Z,1513244026.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:47.179Z,1513244027.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:47.194Z,1513244027.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:47.241Z,1513244027.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:47.586Z,1513244027.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:47.600Z,1513244027.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:47.992Z,1513244027.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:48.025Z,1513244028.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:48.038Z,1513244028.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:48.455Z,1513244028.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:48.474Z,1513244028.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:48.799Z,1513244028.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:48.821Z,1513244028.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:48.834Z,1513244028.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:49.184Z,1513244029.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:49.227Z,1513244029.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:49.237Z,1513244029.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:49.585Z,1513244029.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:49.600Z,1513244029.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:49.984Z,1513244029.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:50.034Z,1513244030.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:50.108Z,1513244030.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:50.454Z,1513244030.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:50.478Z,1513244030.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:50.789Z,1513244030.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:50.804Z,1513244030.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:50.829Z,1513244030.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:51.189Z,1513244031.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:51.206Z,1513244031.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:51.233Z,1513244031.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:51.601Z,1513244031.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:51.638Z,1513244031.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:52.001Z,1513244032.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:52.016Z,1513244032.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:52.030Z,1513244032.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:52.411Z,1513244032.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:52.468Z,1513244032.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:52.789Z,1513244032.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:52.803Z,1513244032.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:52.849Z,1513244032.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:53.191Z,1513244033.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:53.205Z,1513244033.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:53.253Z,1513244033.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:53.588Z,1513244033.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:53.604Z,1513244033.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:53.997Z,1513244033.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:54.020Z,1513244034.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:54.050Z,1513244034.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:54.455Z,1513244034.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:54.498Z,1513244034.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:54.803Z,1513244034.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:54.818Z,1513244034.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:54.845Z,1513244034.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:55.195Z,1513244035.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:55.210Z,1513244035.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:55.249Z,1513244035.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:55.579Z,1513244035.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:55.615Z,1513244035.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:55.976Z,1513244035.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:56.032Z,1513244036.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:56.046Z,1513244036.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:56.404Z,1513244036.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:56.500Z,1513244036.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:56.788Z,1513244036.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:56.804Z,1513244036.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:56.842Z,1513244036.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:57.198Z,1513244037.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:57.214Z,1513244037.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:33:57.245Z,1513244037.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:58.042Z,1513244038.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:58.837Z,1513244038.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:33:59.241Z,1513244039.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:00.038Z,1513244040.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:00.602Z,1513244040.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:00.652Z,1513244040.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:00.834Z,1513244040.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:00.851Z,1513244040.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:00.896Z,1513244040.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:01.113Z,1513244041.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:01.167Z,1513244041.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:01.237Z,1513244041.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:01.516Z,1513244041.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:01.543Z,1513244041.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:01.904Z,1513244041.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:01.950Z,1513244041.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:02.034Z,1513244042.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:02.314Z,1513244042.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:02.331Z,1513244042.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:02.703Z,1513244042.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:02.729Z,1513244042.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:02.854Z,1513244042.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:03.115Z,1513244043.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:03.177Z,1513244043.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:03.257Z,1513244043.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:03.522Z,1513244043.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:03.557Z,1513244043.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:03.928Z,1513244043.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:03.943Z,1513244043.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:04.053Z,1513244044.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:04.306Z,1513244044.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:04.333Z,1513244044.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:04.709Z,1513244044.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:04.743Z,1513244044.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:04.825Z,1513244044.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:05.112Z,1513244045.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:05.132Z,1513244045.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:05.508Z,1513244045.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:05.531Z,1513244045.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:05.622Z,1513244045.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:05.934Z,1513244045.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:06.135Z,1513244046.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:06.312Z,1513244046.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:06.327Z,1513244046.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:06.419Z,1513244046.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:06.710Z,1513244046.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:06.733Z,1513244046.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:06.829Z,1513244046.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:07.113Z,1513244047.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:07.128Z,1513244047.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:07.518Z,1513244047.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:07.534Z,1513244047.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:07.626Z,1513244047.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:07.909Z,1513244047.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:07.925Z,1513244047.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:08.314Z,1513244048.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:08.334Z,1513244048.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:08.423Z,1513244048.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:08.699Z,1513244048.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:08.737Z,1513244048.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:08.841Z,1513244048.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:09.122Z,1513244049.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:09.151Z,1513244049.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:09.526Z,1513244049.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:09.590Z,1513244049.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:09.637Z,1513244049.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:09.925Z,1513244049.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:09.950Z,1513244049.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:10.310Z,1513244050.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:10.347Z,1513244050.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:10.459Z,1513244050.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:10.718Z,1513244050.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:10.753Z,1513244050.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:10.888Z,1513244050.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:11.113Z,1513244051.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:11.128Z,1513244051.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:11.506Z,1513244051.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:11.530Z,1513244051.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:11.682Z,1513244051.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:11.919Z,1513244051.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:11.939Z,1513244051.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:12.320Z,1513244052.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:12.372Z,1513244052.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:12.478Z,1513244052.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:12.758Z,1513244052.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:12.815Z,1513244052.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:13.105Z,1513244053.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:13.148Z,1513244053.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:13.206Z,1513244053.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:13.510Z,1513244053.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:13.517Z,1513244053.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x22834 got:0x15677
2017-12-14T09:34:13.544Z,1513244053.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:13.901Z,1513244053.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:13.916Z,1513244053.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:14.002Z,1513244054.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:14.312Z,1513244054.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:14.344Z,1513244054.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:14.703Z,1513244054.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:14.790Z,1513244054.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:14.797Z,1513244054.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:15.115Z,1513244055.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:15.147Z,1513244055.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:15.217Z,1513244055.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:15.553Z,1513244055.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:15.593Z,1513244055.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:15.930Z,1513244055.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:15.946Z,1513244055.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:16.015Z,1513244056.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:16.299Z,1513244056.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:16.348Z,1513244056.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:16.711Z,1513244056.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:16.734Z,1513244056.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:16.809Z,1513244056.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:17.107Z,1513244057.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:17.140Z,1513244057.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:17.213Z,1513244057.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:17.512Z,1513244057.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:17.535Z,1513244057.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:17.918Z,1513244057.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:17.936Z,1513244057.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:18.010Z,1513244058.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:18.321Z,1513244058.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:18.348Z,1513244058.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:18.747Z,1513244058.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:18.774Z,1513244058.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:18.805Z,1513244058.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:19.113Z,1513244059.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:19.139Z,1513244059.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:19.209Z,1513244059.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:19.507Z,1513244059.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:19.542Z,1513244059.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:19.899Z,1513244059.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:19.938Z,1513244059.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:20.006Z,1513244060.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:20.310Z,1513244060.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:20.359Z,1513244060.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:20.712Z,1513244060.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:20.727Z,1513244060.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:20.801Z,1513244060.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:21.111Z,1513244061.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:21.139Z,1513244061.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:21.205Z,1513244061.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:21.522Z,1513244061.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:21.537Z,1513244061.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:21.922Z,1513244061.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:21.982Z,1513244061.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:22.001Z,1513244062.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:22.307Z,1513244062.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:22.326Z,1513244062.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:22.709Z,1513244062.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:22.763Z,1513244062.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:22.798Z,1513244062.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:23.118Z,1513244063.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:23.133Z,1513244063.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:23.201Z,1513244063.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:23.510Z,1513244063.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:23.558Z,1513244063.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:23.930Z,1513244063.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:23.944Z,1513244063.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:23.998Z,1513244063.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:24.326Z,1513244064.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:24.341Z,1513244064.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:24.724Z,1513244064.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:24.748Z,1513244064.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:24.793Z,1513244064.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:25.112Z,1513244065.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:25.131Z,1513244065.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:25.197Z,1513244065.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:25.510Z,1513244065.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:25.533Z,1513244065.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:25.916Z,1513244065.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:25.946Z,1513244065.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:25.994Z,1513244065.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:26.302Z,1513244066.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:26.335Z,1513244066.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:26.708Z,1513244066.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:26.790Z,1513244066.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:26.831Z,1513244066.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:27.126Z,1513244067.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:27.147Z,1513244067.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:27.193Z,1513244067.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:27.530Z,1513244067.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:27.545Z,1513244067.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:27.927Z,1513244067.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:27.952Z,1513244067.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:27.990Z,1513244067.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:28.304Z,1513244068.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:28.319Z,1513244068.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:28.710Z,1513244068.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:28.775Z,1513244068.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:28.790Z,1513244068.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:29.100Z,1513244069.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:29.143Z,1513244069.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:29.245Z,1513244069.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:29.500Z,1513244069.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:29.523Z,1513244069.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:29.915Z,1513244069.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:29.947Z,1513244069.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:30.043Z,1513244070.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:30.321Z,1513244070.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:30.348Z,1513244070.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:30.711Z,1513244070.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:30.738Z,1513244070.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:30.825Z,1513244070.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:31.116Z,1513244071.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:31.134Z,1513244071.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:31.519Z,1513244071.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:31.534Z,1513244071.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:31.621Z,1513244071.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:31.899Z,1513244071.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:31.959Z,1513244071.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:32.312Z,1513244072.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:32.331Z,1513244072.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:32.419Z,1513244072.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:32.699Z,1513244072.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:32.732Z,1513244072.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:32.849Z,1513244072.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:33.127Z,1513244073.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:33.142Z,1513244073.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:33.523Z,1513244073.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:33.537Z,1513244073.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:33.646Z,1513244073.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:33.909Z,1513244073.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:33.943Z,1513244073.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:34.296Z,1513244074.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:34.340Z,1513244074.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:34.446Z,1513244074.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:34.702Z,1513244074.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:34.738Z,1513244074.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:34.853Z,1513244074.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:35.105Z,1513244075.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:35.140Z,1513244075.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:35.500Z,1513244075.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:35.542Z,1513244075.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:35.650Z,1513244075.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:35.927Z,1513244075.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:35.942Z,1513244075.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:36.326Z,1513244076.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:36.351Z,1513244076.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:36.447Z,1513244076.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:36.714Z,1513244076.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:36.728Z,1513244076.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:36.853Z,1513244076.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:37.112Z,1513244077.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:37.132Z,1513244077.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:37.515Z,1513244077.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:37.529Z,1513244077.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:37.649Z,1513244077.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:37.902Z,1513244077.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:37.925Z,1513244077.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:38.313Z,1513244078.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:38.328Z,1513244078.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:38.448Z,1513244078.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:38.699Z,1513244078.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:38.746Z,1513244078.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:38.889Z,1513244078.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:39.138Z,1513244079.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:39.169Z,1513244079.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:39.514Z,1513244079.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:39.539Z,1513244079.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:39.686Z,1513244079.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:39.918Z,1513244079.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:39.943Z,1513244079.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:40.300Z,1513244080.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:40.342Z,1513244080.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:40.481Z,1513244080.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:40.711Z,1513244080.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:40.882Z,1513244080.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:41.108Z,1513244081.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:41.124Z,1513244081.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:41.242Z,1513244081.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:41.506Z,1513244081.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:41.527Z,1513244081.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:41.932Z,1513244081.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:41.964Z,1513244081.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:42.038Z,1513244082.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:42.348Z,1513244082.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:42.364Z,1513244082.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:42.719Z,1513244082.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:42.834Z,1513244082.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:42.851Z,1513244082.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:43.114Z,1513244083.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:43.128Z,1513244083.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:43.238Z,1513244083.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:43.517Z,1513244083.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:43.590Z,1513244083.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:43.896Z,1513244083.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:43.940Z,1513244083.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:44.034Z,1513244084.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:44.313Z,1513244084.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:44.329Z,1513244084.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:44.715Z,1513244084.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:44.755Z,1513244084.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:44.830Z,1513244084.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:45.124Z,1513244085.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:45.151Z,1513244085.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:45.233Z,1513244085.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:45.541Z,1513244085.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:45.606Z,1513244085.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:45.926Z,1513244085.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:45.954Z,1513244085.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:46.030Z,1513244086.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:46.307Z,1513244086.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:46.327Z,1513244086.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:46.707Z,1513244086.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:46.751Z,1513244086.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:46.825Z,1513244086.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:47.115Z,1513244087.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:47.146Z,1513244087.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:47.229Z,1513244087.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:47.508Z,1513244087.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:47.531Z,1513244087.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:47.921Z,1513244087.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:47.935Z,1513244087.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:48.025Z,1513244088.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:48.325Z,1513244088.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:48.343Z,1513244088.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:48.734Z,1513244088.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:48.756Z,1513244088.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:48.822Z,1513244088.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:49.109Z,1513244089.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:49.139Z,1513244089.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:49.225Z,1513244089.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:49.517Z,1513244089.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:49.531Z,1513244089.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:49.895Z,1513244089.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:49.926Z,1513244089.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:50.022Z,1513244090.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:50.309Z,1513244090.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:50.325Z,1513244090.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:50.712Z,1513244090.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:50.740Z,1513244090.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:50.817Z,1513244090.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:51.114Z,1513244091.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:51.144Z,1513244091.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:51.221Z,1513244091.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:51.522Z,1513244091.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:51.537Z,1513244091.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:51.959Z,1513244091.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:51.987Z,1513244091.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:52.017Z,1513244092.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:52.313Z,1513244092.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:52.327Z,1513244092.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:52.710Z,1513244092.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:52.732Z,1513244092.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:52.813Z,1513244092.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:53.121Z,1513244093.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:53.135Z,1513244093.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:53.217Z,1513244093.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:53.508Z,1513244093.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:53.532Z,1513244093.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:53.921Z,1513244093.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:53.967Z,1513244093.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:54.014Z,1513244094.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:54.319Z,1513244094.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:54.339Z,1513244094.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:54.722Z,1513244094.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:54.810Z,1513244094.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:54.826Z,1513244094.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:55.126Z,1513244095.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:55.151Z,1513244095.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:55.214Z,1513244095.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:55.503Z,1513244095.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:55.530Z,1513244095.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:55.903Z,1513244095.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:55.934Z,1513244095.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:56.011Z,1513244096.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:56.304Z,1513244096.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:56.336Z,1513244096.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:56.720Z,1513244096.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:56.804Z,1513244096.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:56.806Z,1513244096.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:57.125Z,1513244097.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:57.143Z,1513244097.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:57.209Z,1513244097.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:57.524Z,1513244097.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:57.540Z,1513244097.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:34:58.006Z,1513244098.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:58.801Z,1513244098.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:34:59.205Z,1513244099.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:00.001Z,1513244100.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:00.797Z,1513244100.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.046Z,1513244101.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.061Z,1513244101.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:01.160Z,1513244101.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.195Z,1513244101.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:01.201Z,1513244101.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.546Z,1513244101.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.560Z,1513244101.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:01.955Z,1513244101.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:01.995Z,1513244101.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:01.998Z,1513244101.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:02.339Z,1513244102.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:02.355Z,1513244102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:02.735Z,1513244102.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:02.767Z,1513244102.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:02.794Z,1513244102.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:03.159Z,1513244103.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:03.174Z,1513244103.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:03.197Z,1513244103.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:03.554Z,1513244103.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:03.569Z,1513244103.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:03.954Z,1513244103.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:03.974Z,1513244103.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:03.998Z,1513244103.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:04.335Z,1513244104.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:04.368Z,1513244104.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:04.761Z,1513244104.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:04.794Z,1513244104.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:04.815Z,1513244104.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:05.149Z,1513244105.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:05.164Z,1513244105.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:05.197Z,1513244105.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:05.539Z,1513244105.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:05.566Z,1513244105.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:05.954Z,1513244105.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:05.969Z,1513244105.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:05.994Z,1513244105.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:06.354Z,1513244106.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:06.426Z,1513244106.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:06.750Z,1513244106.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:06.773Z,1513244106.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:06.789Z,1513244106.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:07.137Z,1513244107.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:07.165Z,1513244107.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:07.193Z,1513244107.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:07.542Z,1513244107.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:07.599Z,1513244107.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:07.941Z,1513244107.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:07.956Z,1513244107.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:07.990Z,1513244107.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:08.342Z,1513244108.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:08.402Z,1513244108.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:08.754Z,1513244108.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:08.787Z,1513244108.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:08.811Z,1513244108.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:09.156Z,1513244109.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:09.179Z,1513244109.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:09.209Z,1513244109.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:09.551Z,1513244109.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:09.586Z,1513244109.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:09.955Z,1513244109.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:09.983Z,1513244109.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:10.006Z,1513244110.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:10.340Z,1513244110.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:10.359Z,1513244110.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:10.795Z,1513244110.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:10.801Z,1513244110.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:10.838Z,1513244110.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:11.182Z,1513244111.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:11.209Z,1513244111.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:11.222Z,1513244111.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:11.539Z,1513244111.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:11.555Z,1513244111.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:11.942Z,1513244111.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:11.959Z,1513244111.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:12.006Z,1513244112.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:12.353Z,1513244112.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:12.368Z,1513244112.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:12.749Z,1513244112.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:12.764Z,1513244112.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:12.801Z,1513244112.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:13.186Z,1513244113.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:13.202Z,1513244113.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:13.205Z,1513244113.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:13.540Z,1513244113.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:13.559Z,1513244113.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:13.946Z,1513244113.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:14.001Z,1513244114.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:14.017Z,1513244114.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:14.350Z,1513244114.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:14.447Z,1513244114.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:14.738Z,1513244114.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:14.775Z,1513244114.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:14.797Z,1513244114.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:15.150Z,1513244115.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:15.179Z,1513244115.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:15.201Z,1513244115.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:15.550Z,1513244115.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:15.575Z,1513244115.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:15.965Z,1513244115.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:15.979Z,1513244115.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:15.997Z,1513244115.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:16.334Z,1513244116.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:16.350Z,1513244116.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:16.728Z,1513244116.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:16.796Z,1513244116.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:16.802Z,1513244116.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:17.143Z,1513244117.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:17.162Z,1513244117.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:17.205Z,1513244117.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:17.548Z,1513244117.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:17.563Z,1513244117.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:17.942Z,1513244117.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:17.971Z,1513244117.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:18.002Z,1513244118.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:18.355Z,1513244118.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:18.379Z,1513244118.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:18.746Z,1513244118.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:18.762Z,1513244118.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:18.798Z,1513244118.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:19.144Z,1513244119.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:19.159Z,1513244119.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:19.201Z,1513244119.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:19.536Z,1513244119.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:19.556Z,1513244119.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:19.945Z,1513244119.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:19.960Z,1513244119.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:19.998Z,1513244119.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:20.346Z,1513244120.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:20.361Z,1513244120.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:20.769Z,1513244120.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:20.794Z,1513244120.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:20.846Z,1513244120.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:21.151Z,1513244121.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:21.167Z,1513244121.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:21.197Z,1513244121.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:21.557Z,1513244121.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:21.572Z,1513244121.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:21.955Z,1513244121.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:21.975Z,1513244121.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:21.994Z,1513244121.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:22.351Z,1513244122.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:22.411Z,1513244122.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:22.760Z,1513244122.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:22.791Z,1513244122.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:22.812Z,1513244122.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:23.132Z,1513244123.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:23.172Z,1513244123.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:23.217Z,1513244123.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:23.547Z,1513244123.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:23.574Z,1513244123.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:23.982Z,1513244123.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:24.014Z,1513244124.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:24.021Z,1513244124.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:24.354Z,1513244124.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:24.383Z,1513244124.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:24.792Z,1513244124.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:24.810Z,1513244124.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:24.839Z,1513244124.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:25.143Z,1513244125.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:25.163Z,1513244125.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:25.222Z,1513244125.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:25.542Z,1513244125.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:25.559Z,1513244125.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:25.944Z,1513244125.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:25.960Z,1513244125.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:26.017Z,1513244126.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:26.338Z,1513244126.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:26.365Z,1513244126.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:26.735Z,1513244126.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:26.784Z,1513244126.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:26.813Z,1513244126.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:27.168Z,1513244127.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:27.213Z,1513244127.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:27.213Z,1513244127.213 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181
2017-12-14T09:35:27.213Z,1513244127.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:35:27.215Z,1513244127.215 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:27.215Z,1513244127.215 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 181
2017-12-14T09:35:27.215Z,1513244127.215 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:35:27.217Z,1513244127.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:27.229Z,1513244127.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:27.229Z,1513244127.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181
2017-12-14T09:35:27.229Z,1513244127.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:35:27.241Z,1513244127.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:35:27.241Z,1513244127.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:35:27.242Z,1513244127.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:35:27.563Z,1513244127.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:27.611Z,1513244127.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:35:27.611Z,1513244127.611 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181
2017-12-14T09:35:27.612Z,1513244127.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:35:27.612Z,1513244127.612 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 181
2017-12-14T09:35:27.612Z,1513244127.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:35:27.612Z,1513244127.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181
2017-12-14T09:35:27.944Z,1513244127.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:27.966Z,1513244127.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:35:27.967Z,1513244127.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:35:27.967Z,1513244127.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:35:27.967Z,1513244127.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:35:27.968Z,1513244127.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:35:27.968Z,1513244127.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:35:27.968Z,1513244127.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:35:27.969Z,1513244127.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:35:27.969Z,1513244127.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:35:28.014Z,1513244128.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:28.346Z,1513244128.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:28.362Z,1513244128.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:28.735Z,1513244128.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:28.771Z,1513244128.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:28.809Z,1513244128.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:29.131Z,1513244129.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:29.188Z,1513244129.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:29.213Z,1513244129.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:29.535Z,1513244129.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:29.569Z,1513244129.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:29.954Z,1513244129.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:29.976Z,1513244129.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:30.010Z,1513244130.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:30.364Z,1513244130.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:30.452Z,1513244130.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:30.744Z,1513244130.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:30.761Z,1513244130.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:30.805Z,1513244130.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:31.142Z,1513244131.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:31.203Z,1513244131.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:31.209Z,1513244131.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:31.542Z,1513244131.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:31.557Z,1513244131.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:31.947Z,1513244131.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:31.967Z,1513244131.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:32.006Z,1513244132.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:32.333Z,1513244132.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:32.357Z,1513244132.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:32.730Z,1513244132.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:32.769Z,1513244132.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:32.802Z,1513244132.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:33.153Z,1513244133.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:33.182Z,1513244133.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:33.205Z,1513244133.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:33.557Z,1513244133.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:33.580Z,1513244133.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:33.950Z,1513244133.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:33.971Z,1513244133.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:34.002Z,1513244134.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:34.331Z,1513244134.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:34.366Z,1513244134.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:34.735Z,1513244134.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:34.761Z,1513244134.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:34.797Z,1513244134.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:35.135Z,1513244135.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:35.162Z,1513244135.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:35.201Z,1513244135.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:35.531Z,1513244135.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:35.559Z,1513244135.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:35.956Z,1513244135.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:35.970Z,1513244135.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:35.998Z,1513244135.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:36.356Z,1513244136.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:36.370Z,1513244136.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:36.794Z,1513244136.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:36.801Z,1513244136.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:36.854Z,1513244136.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:37.139Z,1513244137.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:37.159Z,1513244137.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:37.253Z,1513244137.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:37.539Z,1513244137.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:37.554Z,1513244137.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:37.952Z,1513244137.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:37.971Z,1513244137.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:38.049Z,1513244138.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:38.348Z,1513244138.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:38.367Z,1513244138.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:38.776Z,1513244138.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:38.845Z,1513244138.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:38.850Z,1513244138.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:39.146Z,1513244139.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:39.175Z,1513244139.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:39.249Z,1513244139.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:39.557Z,1513244139.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:39.614Z,1513244139.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:39.958Z,1513244139.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:39.972Z,1513244139.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:40.046Z,1513244140.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:40.338Z,1513244140.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:40.367Z,1513244140.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:40.731Z,1513244140.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:40.759Z,1513244140.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:40.842Z,1513244140.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:41.140Z,1513244141.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:41.164Z,1513244141.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:41.245Z,1513244141.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:41.547Z,1513244141.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:41.562Z,1513244141.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:41.950Z,1513244141.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:41.965Z,1513244141.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:42.042Z,1513244142.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:42.349Z,1513244142.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:42.364Z,1513244142.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:42.759Z,1513244142.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:42.800Z,1513244142.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:42.838Z,1513244142.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:43.161Z,1513244143.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:43.213Z,1513244143.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:43.249Z,1513244143.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:43.552Z,1513244143.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:43.571Z,1513244143.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:43.929Z,1513244143.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:43.956Z,1513244143.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:44.047Z,1513244144.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:44.337Z,1513244144.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:44.371Z,1513244144.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:44.743Z,1513244144.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:44.780Z,1513244144.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:44.841Z,1513244144.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:45.151Z,1513244145.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:45.177Z,1513244145.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:45.245Z,1513244145.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:45.552Z,1513244145.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:45.579Z,1513244145.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:45.955Z,1513244145.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:45.980Z,1513244145.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:46.041Z,1513244146.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:46.361Z,1513244146.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:46.451Z,1513244146.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:46.740Z,1513244146.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:46.756Z,1513244146.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:46.837Z,1513244146.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:47.134Z,1513244147.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:47.171Z,1513244147.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:47.241Z,1513244147.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:47.546Z,1513244147.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:47.564Z,1513244147.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:47.954Z,1513244147.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:47.970Z,1513244147.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:48.038Z,1513244148.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:48.357Z,1513244148.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:48.379Z,1513244148.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:48.767Z,1513244148.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:48.783Z,1513244148.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:48.833Z,1513244148.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:49.137Z,1513244149.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:49.167Z,1513244149.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:49.237Z,1513244149.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:49.538Z,1513244149.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:49.571Z,1513244149.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:49.940Z,1513244149.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:49.955Z,1513244149.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:50.034Z,1513244150.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:50.340Z,1513244150.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:50.360Z,1513244150.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:50.781Z,1513244150.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:50.830Z,1513244150.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:50.843Z,1513244150.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:51.162Z,1513244151.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:51.178Z,1513244151.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:51.233Z,1513244151.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:51.554Z,1513244151.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:51.642Z,1513244151.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:51.949Z,1513244151.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:51.974Z,1513244151.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:52.030Z,1513244152.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:52.337Z,1513244152.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:52.378Z,1513244152.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:52.782Z,1513244152.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:52.826Z,1513244152.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:52.854Z,1513244152.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:53.140Z,1513244153.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:53.194Z,1513244153.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:53.229Z,1513244153.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:53.538Z,1513244153.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:53.553Z,1513244153.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:53.954Z,1513244153.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:53.986Z,1513244153.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:54.026Z,1513244154.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:54.353Z,1513244154.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:54.367Z,1513244154.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:54.756Z,1513244154.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:54.771Z,1513244154.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:54.822Z,1513244154.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:55.132Z,1513244155.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:55.162Z,1513244155.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:55.225Z,1513244155.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:55.536Z,1513244155.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:55.568Z,1513244155.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:55.930Z,1513244155.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:55.945Z,1513244155.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:56.022Z,1513244156.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:56.338Z,1513244156.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:56.363Z,1513244156.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:56.740Z,1513244156.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:56.755Z,1513244156.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:56.817Z,1513244156.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:57.158Z,1513244157.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:57.178Z,1513244157.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:57.221Z,1513244157.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:57.559Z,1513244157.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:57.591Z,1513244157.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:35:58.018Z,1513244158.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:58.816Z,1513244158.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:35:59.221Z,1513244159.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:00.018Z,1513244160.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:00.816Z,1513244160.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:01.083Z,1513244161.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:01.107Z,1513244161.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:01.215Z,1513244161.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:01.225Z,1513244161.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:01.278Z,1513244161.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:01.587Z,1513244161.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:01.602Z,1513244161.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:01.988Z,1513244161.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:02.003Z,1513244162.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:02.021Z,1513244162.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:02.387Z,1513244162.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:02.406Z,1513244162.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:02.775Z,1513244162.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:02.811Z,1513244162.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:02.817Z,1513244162.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:03.196Z,1513244163.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:03.210Z,1513244163.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:03.221Z,1513244163.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:03.602Z,1513244163.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:03.618Z,1513244163.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:03.988Z,1513244163.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:04.015Z,1513244164.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:04.018Z,1513244164.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:04.372Z,1513244164.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:04.410Z,1513244164.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:04.814Z,1513244164.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:04.818Z,1513244164.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:04.841Z,1513244164.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:05.181Z,1513244165.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:05.207Z,1513244165.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:05.610Z,1513244165.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:05.647Z,1513244165.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:05.678Z,1513244165.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:05.987Z,1513244165.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:06.001Z,1513244166.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:06.014Z,1513244166.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:06.390Z,1513244166.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:06.404Z,1513244166.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:06.813Z,1513244166.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:06.835Z,1513244166.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:06.860Z,1513244166.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:07.184Z,1513244167.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:07.207Z,1513244167.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:07.217Z,1513244167.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:07.587Z,1513244167.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:07.608Z,1513244167.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:07.988Z,1513244167.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:08.003Z,1513244168.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:08.026Z,1513244168.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:08.427Z,1513244168.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:08.482Z,1513244168.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:08.814Z,1513244168.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:08.826Z,1513244168.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:08.840Z,1513244168.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:09.197Z,1513244169.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:09.212Z,1513244169.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:09.229Z,1513244169.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:09.602Z,1513244169.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:09.623Z,1513244169.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:10.003Z,1513244170.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:10.023Z,1513244170.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:10.026Z,1513244170.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:10.412Z,1513244170.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:10.474Z,1513244170.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:10.787Z,1513244170.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:10.819Z,1513244170.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:10.822Z,1513244170.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:11.179Z,1513244171.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:11.195Z,1513244171.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:11.225Z,1513244171.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:11.583Z,1513244171.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:11.646Z,1513244171.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:12.022Z,1513244172.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:12.036Z,1513244172.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:12.076Z,1513244172.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:12.437Z,1513244172.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:12.500Z,1513244172.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:12.794Z,1513244172.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:12.809Z,1513244172.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:12.827Z,1513244172.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:13.188Z,1513244173.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:13.230Z,1513244173.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:13.250Z,1513244173.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:13.593Z,1513244173.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:13.666Z,1513244173.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:13.972Z,1513244173.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:14.006Z,1513244174.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:14.026Z,1513244174.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:14.379Z,1513244174.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:14.534Z,1513244174.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:14.779Z,1513244174.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:14.821Z,1513244174.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:14.838Z,1513244174.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:15.206Z,1513244175.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:15.225Z,1513244175.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:15.241Z,1513244175.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:15.589Z,1513244175.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:15.663Z,1513244175.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:15.990Z,1513244175.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:16.016Z,1513244176.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:16.022Z,1513244176.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:16.372Z,1513244176.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:16.386Z,1513244176.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:16.775Z,1513244176.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:16.800Z,1513244176.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:16.817Z,1513244176.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:17.192Z,1513244177.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:17.207Z,1513244177.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:17.221Z,1513244177.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:17.582Z,1513244177.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:17.607Z,1513244177.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:17.998Z,1513244177.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:18.018Z,1513244178.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:18.020Z,1513244178.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:18.418Z,1513244178.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:18.453Z,1513244178.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:18.814Z,1513244178.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:18.822Z,1513244178.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:18.865Z,1513244178.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:19.190Z,1513244179.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:19.221Z,1513244179.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:19.242Z,1513244179.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:19.582Z,1513244179.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:19.610Z,1513244179.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:19.988Z,1513244179.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:20.038Z,1513244180.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:20.056Z,1513244180.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:20.389Z,1513244180.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:20.408Z,1513244180.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:20.822Z,1513244180.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:20.834Z,1513244180.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:20.852Z,1513244180.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:21.187Z,1513244181.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:21.232Z,1513244181.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:21.261Z,1513244181.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:21.622Z,1513244181.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:21.706Z,1513244181.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:22.019Z,1513244182.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:22.038Z,1513244182.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:22.058Z,1513244182.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:22.381Z,1513244182.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:22.497Z,1513244182.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:22.782Z,1513244182.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:22.807Z,1513244182.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:22.854Z,1513244182.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:23.204Z,1513244183.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:23.248Z,1513244183.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:23.258Z,1513244183.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:23.576Z,1513244183.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:23.616Z,1513244183.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:23.988Z,1513244183.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:24.054Z,1513244184.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:24.063Z,1513244184.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:24.454Z,1513244184.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:24.506Z,1513244184.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:24.800Z,1513244184.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:24.844Z,1513244184.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:24.850Z,1513244184.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:25.188Z,1513244185.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:25.208Z,1513244185.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:25.253Z,1513244185.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:25.606Z,1513244185.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:25.653Z,1513244185.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:25.978Z,1513244185.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:26.026Z,1513244186.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:26.050Z,1513244186.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:26.373Z,1513244186.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:26.451Z,1513244186.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:26.774Z,1513244186.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:26.796Z,1513244186.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:26.846Z,1513244186.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:27.186Z,1513244187.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:27.231Z,1513244187.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:27.593Z,1513244187.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:27.614Z,1513244187.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:27.630Z,1513244187.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:28.020Z,1513244188.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:28.035Z,1513244188.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:28.411Z,1513244188.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:28.445Z,1513244188.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:28.502Z,1513244188.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:28.774Z,1513244188.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:28.827Z,1513244188.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:28.857Z,1513244188.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:29.216Z,1513244189.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:29.247Z,1513244189.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:29.575Z,1513244189.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:29.602Z,1513244189.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:29.654Z,1513244189.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:29.999Z,1513244189.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:30.023Z,1513244190.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:30.417Z,1513244190.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:30.451Z,1513244190.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:30.507Z,1513244190.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:30.787Z,1513244190.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:30.810Z,1513244190.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:30.918Z,1513244190.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:31.189Z,1513244191.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:31.208Z,1513244191.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:31.587Z,1513244191.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:31.602Z,1513244191.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:31.714Z,1513244191.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:31.976Z,1513244191.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:32.051Z,1513244192.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:32.386Z,1513244192.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:32.423Z,1513244192.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:32.510Z,1513244192.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:32.826Z,1513244192.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:32.863Z,1513244192.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:33.187Z,1513244193.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:33.237Z,1513244193.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:33.258Z,1513244193.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:33.603Z,1513244193.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:33.643Z,1513244193.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:34.004Z,1513244194.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:34.047Z,1513244194.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:34.054Z,1513244194.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:34.402Z,1513244194.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:34.443Z,1513244194.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:34.828Z,1513244194.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:34.850Z,1513244194.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:34.899Z,1513244194.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:35.177Z,1513244195.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:35.216Z,1513244195.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:35.254Z,1513244195.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:35.589Z,1513244195.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:35.651Z,1513244195.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:35.996Z,1513244195.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:36.050Z,1513244196.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:36.171Z,1513244196.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:36.428Z,1513244196.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:36.489Z,1513244196.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:36.797Z,1513244196.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:36.846Z,1513244196.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:36.891Z,1513244196.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:37.184Z,1513244197.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:37.212Z,1513244197.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:37.249Z,1513244197.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:37.584Z,1513244197.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:37.643Z,1513244197.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:38.015Z,1513244198.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:38.046Z,1513244198.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:38.050Z,1513244198.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:38.403Z,1513244198.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:38.501Z,1513244198.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:38.794Z,1513244198.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:38.837Z,1513244198.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:38.841Z,1513244198.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:39.198Z,1513244199.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:39.245Z,1513244199.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:39.248Z,1513244199.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:39.602Z,1513244199.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:39.650Z,1513244199.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:39.996Z,1513244199.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:40.012Z,1513244200.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:40.042Z,1513244200.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:40.376Z,1513244200.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:40.525Z,1513244200.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:40.785Z,1513244200.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:40.832Z,1513244200.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:40.838Z,1513244200.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:41.197Z,1513244201.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:41.237Z,1513244201.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:41.585Z,1513244201.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:41.634Z,1513244201.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:41.648Z,1513244201.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:41.989Z,1513244201.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:42.008Z,1513244202.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:42.413Z,1513244202.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:42.431Z,1513244202.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:42.510Z,1513244202.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:42.797Z,1513244202.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:42.853Z,1513244202.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:42.865Z,1513244202.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:43.172Z,1513244203.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:43.206Z,1513244203.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:43.605Z,1513244203.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:43.628Z,1513244203.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:43.662Z,1513244203.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:43.976Z,1513244203.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:44.012Z,1513244204.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:44.377Z,1513244204.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:44.460Z,1513244204.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:44.546Z,1513244204.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:44.781Z,1513244204.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:44.856Z,1513244204.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:44.942Z,1513244204.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:45.188Z,1513244205.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:45.235Z,1513244205.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:45.592Z,1513244205.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:45.651Z,1513244205.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:45.738Z,1513244205.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:46.002Z,1513244206.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:46.055Z,1513244206.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:46.387Z,1513244206.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:46.402Z,1513244206.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:46.534Z,1513244206.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:46.831Z,1513244206.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:46.875Z,1513244206.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:47.188Z,1513244207.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:47.202Z,1513244207.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:47.205Z,1513244207.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:47.589Z,1513244207.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:47.604Z,1513244207.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:47.998Z,1513244207.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:48.039Z,1513244208.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:48.059Z,1513244208.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:48.398Z,1513244208.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:48.514Z,1513244208.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:48.794Z,1513244208.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:48.828Z,1513244208.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:48.870Z,1513244208.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:49.177Z,1513244209.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:49.192Z,1513244209.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:49.214Z,1513244209.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:49.586Z,1513244209.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:49.623Z,1513244209.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:49.981Z,1513244209.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:49.995Z,1513244209.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:50.018Z,1513244210.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:50.379Z,1513244210.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:50.471Z,1513244210.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:50.786Z,1513244210.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:50.801Z,1513244210.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:50.815Z,1513244210.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:51.200Z,1513244211.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:51.217Z,1513244211.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:51.239Z,1513244211.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:51.597Z,1513244211.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:51.612Z,1513244211.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:51.998Z,1513244211.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:52.012Z,1513244212.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:52.014Z,1513244212.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:52.382Z,1513244212.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:52.490Z,1513244212.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:52.775Z,1513244212.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:52.798Z,1513244212.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:52.810Z,1513244212.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:53.189Z,1513244213.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:53.204Z,1513244213.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:53.217Z,1513244213.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:53.584Z,1513244213.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:53.599Z,1513244213.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:53.988Z,1513244213.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:54.011Z,1513244214.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:54.030Z,1513244214.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:54.482Z,1513244214.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:54.534Z,1513244214.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:54.793Z,1513244214.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:54.811Z,1513244214.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:54.825Z,1513244214.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:55.175Z,1513244215.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:55.201Z,1513244215.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:55.238Z,1513244215.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:55.593Z,1513244215.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:55.608Z,1513244215.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:55.975Z,1513244215.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:56.014Z,1513244216.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:56.033Z,1513244216.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:56.380Z,1513244216.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:56.468Z,1513244216.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:56.785Z,1513244216.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:56.800Z,1513244216.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:56.803Z,1513244216.803 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:36:56.803Z,1513244216.803 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:36:56.803Z,1513244216.803 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:36:56.804Z,1513244216.804 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:36:56.830Z,1513244216.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:57.186Z,1513244217.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:57.233Z,1513244217.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:57.278Z,1513244217.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:57.282Z,1513244217.282 [Default:CheckIn:D] Stopped
2017-12-14T09:36:57.282Z,1513244217.282 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:36:57.597Z,1513244217.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:57.612Z,1513244217.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:36:57.636Z,1513244217.636 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 543.698177 min 
2017-12-14T09:36:57.636Z,1513244217.636 [Default:CheckIn:E] Stopped
2017-12-14T09:36:57.636Z,1513244217.636 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:36:57.636Z,1513244217.636 [Default:CheckIn] Stopped
2017-12-14T09:36:57.653Z,1513244217.653 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:36:57.653Z,1513244217.653 [Default:CheckIn](INFO): Running loop #53
2017-12-14T09:36:57.653Z,1513244217.653 [Default:CheckIn] Running Loop=53
2017-12-14T09:36:57.653Z,1513244217.653 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:36:57.653Z,1513244217.653 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:36:58.030Z,1513244218.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:58.825Z,1513244218.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:36:59.229Z,1513244219.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:00.025Z,1513244220.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:00.822Z,1513244220.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:01.221Z,1513244221.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:01.225Z,1513244221.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:01.301Z,1513244221.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:01.396Z,1513244221.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:01.435Z,1513244221.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:01.770Z,1513244221.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:01.791Z,1513244221.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:02.021Z,1513244222.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:02.179Z,1513244222.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:02.227Z,1513244222.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:02.624Z,1513244222.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:02.639Z,1513244222.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:02.818Z,1513244222.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:02.974Z,1513244222.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:03.022Z,1513244223.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:03.221Z,1513244223.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:03.379Z,1513244223.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:03.393Z,1513244223.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:03.778Z,1513244223.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:03.810Z,1513244223.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:04.018Z,1513244224.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:04.162Z,1513244224.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:04.195Z,1513244224.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:04.562Z,1513244224.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:04.595Z,1513244224.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:04.813Z,1513244224.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:04.963Z,1513244224.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:04.998Z,1513244224.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:05.217Z,1513244225.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:05.365Z,1513244225.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:05.403Z,1513244225.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:05.766Z,1513244225.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:05.801Z,1513244225.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:06.013Z,1513244226.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:06.174Z,1513244226.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:06.210Z,1513244226.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:06.585Z,1513244226.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:06.603Z,1513244226.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:06.809Z,1513244226.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:06.973Z,1513244226.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:07.012Z,1513244227.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:07.213Z,1513244227.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:07.363Z,1513244227.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:07.400Z,1513244227.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:07.763Z,1513244227.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:07.794Z,1513244227.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:08.009Z,1513244228.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:08.163Z,1513244228.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:08.179Z,1513244228.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:08.567Z,1513244228.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:08.583Z,1513244228.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:08.805Z,1513244228.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:08.978Z,1513244228.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:09.003Z,1513244229.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:09.209Z,1513244229.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:09.381Z,1513244229.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:09.414Z,1513244229.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:09.782Z,1513244229.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:09.817Z,1513244229.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:10.006Z,1513244230.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:10.169Z,1513244230.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:10.192Z,1513244230.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:10.571Z,1513244230.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:10.586Z,1513244230.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:10.801Z,1513244230.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:10.969Z,1513244230.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:10.984Z,1513244230.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:11.374Z,1513244231.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:11.420Z,1513244231.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:11.599Z,1513244231.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:11.770Z,1513244231.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:11.806Z,1513244231.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:12.178Z,1513244232.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:12.193Z,1513244232.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:12.393Z,1513244232.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:12.589Z,1513244232.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:12.614Z,1513244232.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:12.973Z,1513244232.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:12.989Z,1513244232.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:13.190Z,1513244233.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:13.372Z,1513244233.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:13.424Z,1513244233.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:13.771Z,1513244233.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:13.791Z,1513244233.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:13.985Z,1513244233.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:14.174Z,1513244234.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:14.189Z,1513244234.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:14.570Z,1513244234.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:14.592Z,1513244234.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:14.784Z,1513244234.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:14.980Z,1513244234.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:14.996Z,1513244234.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:15.380Z,1513244235.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:15.395Z,1513244235.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:15.577Z,1513244235.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:15.781Z,1513244235.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:15.796Z,1513244235.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:16.170Z,1513244236.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:16.191Z,1513244236.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:16.373Z,1513244236.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:16.615Z,1513244236.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:16.652Z,1513244236.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:16.968Z,1513244236.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:16.983Z,1513244236.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:17.170Z,1513244237.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:17.368Z,1513244237.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:17.384Z,1513244237.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:17.767Z,1513244237.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:17.781Z,1513244237.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:17.965Z,1513244237.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:18.174Z,1513244238.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:18.189Z,1513244238.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:18.577Z,1513244238.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:18.616Z,1513244238.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:18.761Z,1513244238.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:18.985Z,1513244238.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:19.019Z,1513244239.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:19.368Z,1513244239.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:19.391Z,1513244239.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:19.558Z,1513244239.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:19.764Z,1513244239.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:19.791Z,1513244239.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:20.171Z,1513244240.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:20.191Z,1513244240.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:20.357Z,1513244240.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:20.586Z,1513244240.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:20.602Z,1513244240.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:20.981Z,1513244240.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:20.999Z,1513244240.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:21.154Z,1513244241.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:21.381Z,1513244241.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:21.395Z,1513244241.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:21.780Z,1513244241.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:21.796Z,1513244241.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:21.949Z,1513244241.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:22.166Z,1513244242.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:22.188Z,1513244242.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:22.571Z,1513244242.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:22.591Z,1513244242.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:22.746Z,1513244242.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:22.981Z,1513244242.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:23.008Z,1513244243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:23.382Z,1513244243.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:23.453Z,1513244243.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:23.541Z,1513244243.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:23.775Z,1513244243.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:23.827Z,1513244243.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:24.176Z,1513244244.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:24.236Z,1513244244.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:24.338Z,1513244244.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:24.587Z,1513244244.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:24.603Z,1513244244.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:24.984Z,1513244244.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:25.039Z,1513244245.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:25.133Z,1513244245.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:25.374Z,1513244245.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:25.398Z,1513244245.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:25.714Z,1513244245.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:25.783Z,1513244245.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:25.837Z,1513244245.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:26.117Z,1513244246.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.196Z,1513244246.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.243Z,1513244246.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:26.521Z,1513244246.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.575Z,1513244246.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.594Z,1513244246.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:26.926Z,1513244246.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.981Z,1513244246.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:26.996Z,1513244246.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:27.329Z,1513244247.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:27.378Z,1513244247.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:27.409Z,1513244247.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:27.742Z,1513244247.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:27.798Z,1513244247.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:27.823Z,1513244247.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:28.145Z,1513244248.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:28.184Z,1513244248.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:28.198Z,1513244248.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:28.549Z,1513244248.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:28.585Z,1513244248.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:28.599Z,1513244248.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:28.953Z,1513244248.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:28.972Z,1513244248.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:29.017Z,1513244249.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:29.358Z,1513244249.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:29.400Z,1513244249.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:29.469Z,1513244249.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:29.773Z,1513244249.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:29.787Z,1513244249.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:30.158Z,1513244250.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:30.180Z,1513244250.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:30.195Z,1513244250.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:30.578Z,1513244250.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:30.592Z,1513244250.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:30.961Z,1513244250.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:30.980Z,1513244250.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:30.995Z,1513244250.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:31.359Z,1513244251.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:31.365Z,1513244251.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:31.395Z,1513244251.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:31.774Z,1513244251.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:31.795Z,1513244251.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:32.162Z,1513244252.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:32.176Z,1513244252.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:32.192Z,1513244252.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:32.585Z,1513244252.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:32.615Z,1513244252.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:32.817Z,1513244252.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:32.983Z,1513244252.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:33.035Z,1513244253.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:33.389Z,1513244253.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:33.404Z,1513244253.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:33.613Z,1513244253.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:33.782Z,1513244253.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:33.797Z,1513244253.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:34.163Z,1513244254.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:34.224Z,1513244254.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:34.411Z,1513244254.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:34.563Z,1513244254.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:34.597Z,1513244254.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:34.837Z,1513244254.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:34.963Z,1513244254.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:34.995Z,1513244254.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:35.363Z,1513244255.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:35.393Z,1513244255.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:35.634Z,1513244255.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:35.789Z,1513244255.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:35.842Z,1513244255.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:36.186Z,1513244256.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:36.201Z,1513244256.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:36.431Z,1513244256.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:36.589Z,1513244256.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:36.604Z,1513244256.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:36.841Z,1513244256.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:36.986Z,1513244256.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:37.001Z,1513244257.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:37.360Z,1513244257.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:37.387Z,1513244257.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:37.638Z,1513244257.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:37.766Z,1513244257.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:37.790Z,1513244257.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:38.168Z,1513244258.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:38.195Z,1513244258.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:38.438Z,1513244258.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:38.563Z,1513244258.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:38.589Z,1513244258.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:38.845Z,1513244258.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:38.988Z,1513244258.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:39.028Z,1513244259.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:39.405Z,1513244259.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:39.419Z,1513244259.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:39.641Z,1513244259.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:39.778Z,1513244259.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:39.811Z,1513244259.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:40.170Z,1513244260.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:40.212Z,1513244260.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:40.438Z,1513244260.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:40.583Z,1513244260.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:40.610Z,1513244260.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:40.897Z,1513244260.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:40.972Z,1513244260.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:41.007Z,1513244261.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:41.368Z,1513244261.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:41.384Z,1513244261.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:41.694Z,1513244261.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:41.771Z,1513244261.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:41.788Z,1513244261.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:42.221Z,1513244262.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:42.270Z,1513244262.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:42.489Z,1513244262.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:42.586Z,1513244262.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:42.615Z,1513244262.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:42.986Z,1513244262.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:43.012Z,1513244263.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:43.173Z,1513244263.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:43.375Z,1513244263.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:43.415Z,1513244263.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:43.768Z,1513244263.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:43.783Z,1513244263.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:43.970Z,1513244263.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:44.171Z,1513244264.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:44.192Z,1513244264.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:44.572Z,1513244264.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:44.587Z,1513244264.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:44.768Z,1513244264.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:44.985Z,1513244264.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:45.017Z,1513244265.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:45.177Z,1513244265.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:45.389Z,1513244265.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:45.425Z,1513244265.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:45.782Z,1513244265.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:45.842Z,1513244265.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:45.974Z,1513244265.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:46.175Z,1513244266.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:46.200Z,1513244266.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:46.572Z,1513244266.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:46.644Z,1513244266.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:46.769Z,1513244266.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:46.963Z,1513244266.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:46.994Z,1513244266.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:47.173Z,1513244267.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:47.363Z,1513244267.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:47.393Z,1513244267.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:47.767Z,1513244267.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:47.834Z,1513244267.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:47.969Z,1513244267.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:48.190Z,1513244268.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:48.206Z,1513244268.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:48.610Z,1513244268.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:48.671Z,1513244268.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:48.766Z,1513244268.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:48.974Z,1513244268.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:49.011Z,1513244269.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:49.169Z,1513244269.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:49.371Z,1513244269.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:49.399Z,1513244269.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:49.769Z,1513244269.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:49.800Z,1513244269.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:49.965Z,1513244269.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:50.171Z,1513244270.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:50.200Z,1513244270.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:50.586Z,1513244270.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:50.600Z,1513244270.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:50.761Z,1513244270.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:50.986Z,1513244270.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:51.001Z,1513244271.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:51.165Z,1513244271.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:51.386Z,1513244271.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:51.406Z,1513244271.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:51.802Z,1513244271.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:51.831Z,1513244271.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:51.962Z,1513244271.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:52.169Z,1513244272.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:52.215Z,1513244272.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:52.574Z,1513244272.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:52.588Z,1513244272.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:52.757Z,1513244272.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:52.975Z,1513244272.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:52.990Z,1513244272.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:53.161Z,1513244273.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:53.368Z,1513244273.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:53.396Z,1513244273.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:53.775Z,1513244273.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:53.792Z,1513244273.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:53.959Z,1513244273.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:54.176Z,1513244274.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:54.195Z,1513244274.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:54.584Z,1513244274.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:54.603Z,1513244274.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:54.753Z,1513244274.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:55.002Z,1513244275.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:55.030Z,1513244275.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:55.158Z,1513244275.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:55.363Z,1513244275.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:55.389Z,1513244275.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:55.762Z,1513244275.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:55.789Z,1513244275.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:55.953Z,1513244275.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:56.167Z,1513244276.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:56.193Z,1513244276.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:56.563Z,1513244276.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:56.595Z,1513244276.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:56.751Z,1513244276.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:56.982Z,1513244276.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:57.036Z,1513244277.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:57.189Z,1513244277.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:57.387Z,1513244277.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:57.401Z,1513244277.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:57.770Z,1513244277.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:57.796Z,1513244277.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:37:57.986Z,1513244277.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:58.783Z,1513244278.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:59.197Z,1513244279.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:37:59.994Z,1513244279.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:00.789Z,1513244280.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:01.193Z,1513244281.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:01.268Z,1513244281.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:01.291Z,1513244281.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:01.451Z,1513244281.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:01.504Z,1513244281.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:01.753Z,1513244281.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:01.768Z,1513244281.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:01.989Z,1513244281.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:02.153Z,1513244282.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:02.168Z,1513244282.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:02.552Z,1513244282.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:02.567Z,1513244282.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:02.785Z,1513244282.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:02.942Z,1513244282.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:02.960Z,1513244282.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:03.339Z,1513244283.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:03.373Z,1513244283.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:03.425Z,1513244283.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:03.750Z,1513244283.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:03.771Z,1513244283.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:04.158Z,1513244284.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:04.172Z,1513244284.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:04.221Z,1513244284.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:04.569Z,1513244284.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:04.619Z,1513244284.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:04.842Z,1513244284.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:04.958Z,1513244284.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:04.979Z,1513244284.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:05.342Z,1513244285.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:05.369Z,1513244285.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:05.637Z,1513244285.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:05.739Z,1513244285.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:05.764Z,1513244285.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:06.139Z,1513244286.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:06.170Z,1513244286.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:06.436Z,1513244286.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:06.538Z,1513244286.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:06.575Z,1513244286.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:06.845Z,1513244286.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:06.962Z,1513244286.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:06.980Z,1513244286.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:07.363Z,1513244287.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:07.378Z,1513244287.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:07.642Z,1513244287.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:07.778Z,1513244287.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:07.819Z,1513244287.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:08.144Z,1513244288.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:08.173Z,1513244288.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:08.439Z,1513244288.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:08.546Z,1513244288.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:08.579Z,1513244288.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:08.885Z,1513244288.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:08.948Z,1513244288.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:09.011Z,1513244289.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:09.354Z,1513244289.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:09.368Z,1513244289.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:09.685Z,1513244289.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:09.746Z,1513244289.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:09.799Z,1513244289.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:10.158Z,1513244290.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:10.172Z,1513244290.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:10.481Z,1513244290.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:10.560Z,1513244290.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:10.610Z,1513244290.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:10.986Z,1513244290.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:11.016Z,1513244291.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:11.170Z,1513244291.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:11.338Z,1513244291.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:11.400Z,1513244291.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:11.739Z,1513244291.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:11.766Z,1513244291.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:11.965Z,1513244291.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:12.154Z,1513244292.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:12.168Z,1513244292.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:12.538Z,1513244292.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:12.571Z,1513244292.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:12.764Z,1513244292.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:12.956Z,1513244292.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:12.974Z,1513244292.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:13.177Z,1513244293.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:13.365Z,1513244293.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:13.379Z,1513244293.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:13.763Z,1513244293.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:13.777Z,1513244293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:13.973Z,1513244293.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:14.174Z,1513244294.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:14.207Z,1513244294.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:14.571Z,1513244294.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:14.586Z,1513244294.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:14.769Z,1513244294.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:14.960Z,1513244294.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:14.975Z,1513244294.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:15.173Z,1513244295.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:15.344Z,1513244295.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:15.371Z,1513244295.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:15.741Z,1513244295.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:15.775Z,1513244295.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:15.970Z,1513244295.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:16.168Z,1513244296.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:16.182Z,1513244296.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:16.569Z,1513244296.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:16.591Z,1513244296.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:16.765Z,1513244296.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:16.965Z,1513244296.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:16.980Z,1513244296.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:17.169Z,1513244297.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:17.343Z,1513244297.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:17.419Z,1513244297.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:17.739Z,1513244297.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:17.776Z,1513244297.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:17.965Z,1513244297.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:18.144Z,1513244298.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:18.176Z,1513244298.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:18.567Z,1513244298.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:18.583Z,1513244298.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:18.761Z,1513244298.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:18.950Z,1513244298.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:18.985Z,1513244298.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:19.165Z,1513244299.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:19.366Z,1513244299.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:19.437Z,1513244299.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:19.761Z,1513244299.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:19.780Z,1513244299.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:19.961Z,1513244299.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:20.139Z,1513244300.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:20.173Z,1513244300.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:20.546Z,1513244300.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:20.600Z,1513244300.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:20.760Z,1513244300.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:20.940Z,1513244300.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:20.975Z,1513244300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:21.165Z,1513244301.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:21.344Z,1513244301.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:21.359Z,1513244301.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:21.743Z,1513244301.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:21.785Z,1513244301.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:21.963Z,1513244301.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:22.153Z,1513244302.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:22.181Z,1513244302.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:22.553Z,1513244302.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:22.582Z,1513244302.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:22.757Z,1513244302.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:22.954Z,1513244302.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:22.980Z,1513244302.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:23.161Z,1513244303.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:23.341Z,1513244303.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:23.356Z,1513244303.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:23.782Z,1513244303.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:23.840Z,1513244303.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:23.957Z,1513244303.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:24.151Z,1513244304.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:24.183Z,1513244304.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:24.543Z,1513244304.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:24.558Z,1513244304.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:24.754Z,1513244304.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:24.965Z,1513244304.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:24.996Z,1513244304.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:25.181Z,1513244305.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:25.357Z,1513244305.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:25.388Z,1513244305.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:25.761Z,1513244305.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:25.792Z,1513244305.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:25.977Z,1513244305.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:26.145Z,1513244306.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:26.159Z,1513244306.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:26.551Z,1513244306.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:26.567Z,1513244306.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:26.775Z,1513244306.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:26.974Z,1513244306.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:27.006Z,1513244307.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:27.193Z,1513244307.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:27.362Z,1513244307.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:27.376Z,1513244307.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:27.753Z,1513244307.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:27.768Z,1513244307.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:27.990Z,1513244307.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:28.162Z,1513244308.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:28.183Z,1513244308.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:28.183Z,1513244308.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182
2017-12-14T09:38:28.183Z,1513244308.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:38:28.201Z,1513244308.201 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:28.201Z,1513244308.201 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 182
2017-12-14T09:38:28.201Z,1513244308.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:38:28.203Z,1513244308.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:28.203Z,1513244308.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182
2017-12-14T09:38:28.203Z,1513244308.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:38:28.236Z,1513244308.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:38:28.236Z,1513244308.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:38:28.236Z,1513244308.236 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:38:28.565Z,1513244308.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:28.593Z,1513244308.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:38:28.593Z,1513244308.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182
2017-12-14T09:38:28.593Z,1513244308.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:38:28.593Z,1513244308.593 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 182
2017-12-14T09:38:28.594Z,1513244308.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:38:28.594Z,1513244308.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182
2017-12-14T09:38:28.785Z,1513244308.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:28.955Z,1513244308.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:28.978Z,1513244308.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:38:28.979Z,1513244308.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:38:28.979Z,1513244308.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:38:28.979Z,1513244308.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:38:28.980Z,1513244308.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:38:28.980Z,1513244308.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:38:28.980Z,1513244308.980 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:38:28.981Z,1513244308.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:38:28.981Z,1513244308.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:38:29.189Z,1513244309.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:29.339Z,1513244309.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:29.368Z,1513244309.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:29.739Z,1513244309.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:29.780Z,1513244309.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:29.986Z,1513244309.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:30.159Z,1513244310.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:30.197Z,1513244310.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:30.555Z,1513244310.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:30.591Z,1513244310.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:30.781Z,1513244310.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:30.950Z,1513244310.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:30.972Z,1513244310.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:31.185Z,1513244311.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:31.363Z,1513244311.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:31.418Z,1513244311.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:31.762Z,1513244311.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:31.816Z,1513244311.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:31.981Z,1513244311.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:32.147Z,1513244312.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:32.162Z,1513244312.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:32.548Z,1513244312.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:32.599Z,1513244312.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:32.780Z,1513244312.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:32.942Z,1513244312.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:32.965Z,1513244312.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:33.185Z,1513244313.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:33.375Z,1513244313.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:33.420Z,1513244313.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:33.746Z,1513244313.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:33.799Z,1513244313.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:33.984Z,1513244313.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:34.154Z,1513244314.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:34.169Z,1513244314.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:34.553Z,1513244314.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:34.575Z,1513244314.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:34.777Z,1513244314.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:34.954Z,1513244314.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:34.968Z,1513244314.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:35.181Z,1513244315.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:35.342Z,1513244315.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:35.375Z,1513244315.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:35.751Z,1513244315.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:35.766Z,1513244315.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:35.977Z,1513244315.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:36.147Z,1513244316.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:36.163Z,1513244316.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:36.555Z,1513244316.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:36.578Z,1513244316.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:36.773Z,1513244316.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:36.962Z,1513244316.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:36.977Z,1513244316.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:37.177Z,1513244317.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:37.361Z,1513244317.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:37.378Z,1513244317.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:37.756Z,1513244317.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:37.775Z,1513244317.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:37.973Z,1513244317.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:38.142Z,1513244318.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:38.170Z,1513244318.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:38.543Z,1513244318.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:38.567Z,1513244318.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:38.771Z,1513244318.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:38.939Z,1513244318.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:38.970Z,1513244318.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:39.177Z,1513244319.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:39.339Z,1513244319.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:39.374Z,1513244319.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:39.759Z,1513244319.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:39.791Z,1513244319.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:39.974Z,1513244319.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:40.150Z,1513244320.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:40.178Z,1513244320.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:40.554Z,1513244320.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:40.580Z,1513244320.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:40.771Z,1513244320.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:40.950Z,1513244320.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:40.978Z,1513244320.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:41.177Z,1513244321.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:41.338Z,1513244321.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:41.375Z,1513244321.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:41.742Z,1513244321.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:41.783Z,1513244321.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:41.974Z,1513244321.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:42.144Z,1513244322.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:42.182Z,1513244322.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:42.545Z,1513244322.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:42.559Z,1513244322.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:42.769Z,1513244322.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:42.961Z,1513244322.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:43.011Z,1513244323.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:43.173Z,1513244323.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:43.353Z,1513244323.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:43.384Z,1513244323.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:43.753Z,1513244323.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:43.768Z,1513244323.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:43.969Z,1513244323.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:44.144Z,1513244324.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:44.159Z,1513244324.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:44.555Z,1513244324.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:44.591Z,1513244324.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:44.765Z,1513244324.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:44.952Z,1513244324.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:44.971Z,1513244324.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:45.169Z,1513244325.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:45.351Z,1513244325.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:45.366Z,1513244325.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:45.743Z,1513244325.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:45.758Z,1513244325.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:45.966Z,1513244325.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:46.163Z,1513244326.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:46.195Z,1513244326.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:46.561Z,1513244326.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:46.579Z,1513244326.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:46.761Z,1513244326.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:46.963Z,1513244326.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:46.979Z,1513244326.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:47.165Z,1513244327.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:47.339Z,1513244327.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:47.371Z,1513244327.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:47.742Z,1513244327.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:47.776Z,1513244327.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:47.962Z,1513244327.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:48.140Z,1513244328.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:48.162Z,1513244328.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:48.538Z,1513244328.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:48.575Z,1513244328.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:48.757Z,1513244328.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:48.958Z,1513244328.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:48.991Z,1513244328.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:49.161Z,1513244329.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:49.356Z,1513244329.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:49.391Z,1513244329.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:49.759Z,1513244329.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:49.781Z,1513244329.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:49.957Z,1513244329.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:50.147Z,1513244330.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:50.187Z,1513244330.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:50.543Z,1513244330.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:50.563Z,1513244330.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:50.753Z,1513244330.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:50.951Z,1513244330.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:50.971Z,1513244330.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:51.157Z,1513244331.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:51.350Z,1513244331.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:51.365Z,1513244331.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:51.748Z,1513244331.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:51.767Z,1513244331.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:51.954Z,1513244331.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:52.163Z,1513244332.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:52.211Z,1513244332.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:52.568Z,1513244332.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:52.621Z,1513244332.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:52.751Z,1513244332.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:52.978Z,1513244332.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:52.999Z,1513244332.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:53.193Z,1513244333.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:53.344Z,1513244333.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:53.377Z,1513244333.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:53.746Z,1513244333.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:53.801Z,1513244333.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:53.990Z,1513244333.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:54.146Z,1513244334.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:54.202Z,1513244334.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:54.539Z,1513244334.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:54.556Z,1513244334.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:54.786Z,1513244334.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:54.949Z,1513244334.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:54.986Z,1513244334.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:55.189Z,1513244335.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:55.358Z,1513244335.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:55.422Z,1513244335.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:55.758Z,1513244335.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:55.787Z,1513244335.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:55.985Z,1513244335.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:56.146Z,1513244336.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:56.188Z,1513244336.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:56.544Z,1513244336.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:56.574Z,1513244336.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:56.781Z,1513244336.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:56.948Z,1513244336.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:56.966Z,1513244336.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:57.185Z,1513244337.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:57.349Z,1513244337.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:57.363Z,1513244337.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:57.745Z,1513244337.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:57.759Z,1513244337.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:57.982Z,1513244337.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:58.157Z,1513244338.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:58.188Z,1513244338.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:38:58.777Z,1513244338.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:59.181Z,1513244339.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:38:59.978Z,1513244339.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:00.774Z,1513244340.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:01.177Z,1513244341.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:01.641Z,1513244341.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:01.656Z,1513244341.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:01.771Z,1513244341.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:01.815Z,1513244341.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:01.977Z,1513244341.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:02.136Z,1513244342.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:02.150Z,1513244342.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:02.542Z,1513244342.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:02.556Z,1513244342.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:02.774Z,1513244342.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:02.942Z,1513244342.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:02.965Z,1513244342.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:03.177Z,1513244343.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:03.348Z,1513244343.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:03.363Z,1513244343.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:03.727Z,1513244343.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:03.753Z,1513244343.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:03.975Z,1513244343.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:04.142Z,1513244344.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:04.169Z,1513244344.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:04.558Z,1513244344.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:04.614Z,1513244344.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:04.769Z,1513244344.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:04.956Z,1513244344.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:04.971Z,1513244344.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:05.173Z,1513244345.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:05.324Z,1513244345.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:05.353Z,1513244345.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:05.752Z,1513244345.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:05.767Z,1513244345.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:05.970Z,1513244345.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:06.155Z,1513244346.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:06.203Z,1513244346.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:06.532Z,1513244346.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:06.548Z,1513244346.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:06.767Z,1513244346.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:06.920Z,1513244346.920 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T09:39:06.920Z,1513244346.920 [NAL9602] Data Fault, FailCount= 5
2017-12-14T09:39:06.920Z,1513244346.920 [NAL9602](ERROR): Data Fault
2017-12-14T09:39:06.937Z,1513244346.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:06.953Z,1513244346.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:06.995Z,1513244346.995 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T09:39:06.995Z,1513244346.995 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T09:39:07.177Z,1513244347.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:07.317Z,1513244347.317 [NAL9602](INFO): Powering down
2017-12-14T09:39:07.334Z,1513244347.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:07.348Z,1513244347.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:07.385Z,1513244347.385 [CBIT](INFO): Critical error at 20171214T093906
2017-12-14T09:39:07.734Z,1513244347.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:07.749Z,1513244347.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:07.974Z,1513244347.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:08.133Z,1513244348.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:08.148Z,1513244348.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:08.534Z,1513244348.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:08.549Z,1513244348.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:08.770Z,1513244348.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:08.936Z,1513244348.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:08.951Z,1513244348.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:09.177Z,1513244349.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:09.380Z,1513244349.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:09.436Z,1513244349.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:09.733Z,1513244349.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:09.748Z,1513244349.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:09.977Z,1513244349.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:10.123Z,1513244350.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:10.150Z,1513244350.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:10.526Z,1513244350.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:10.559Z,1513244350.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:10.773Z,1513244350.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:10.943Z,1513244350.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:10.963Z,1513244350.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:11.177Z,1513244351.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:11.323Z,1513244351.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:11.359Z,1513244351.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:11.730Z,1513244351.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:11.756Z,1513244351.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:11.974Z,1513244351.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:12.126Z,1513244352.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:12.158Z,1513244352.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:12.171Z,1513244352.171 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:39:12.548Z,1513244352.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:12.602Z,1513244352.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:12.769Z,1513244352.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:12.926Z,1513244352.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:12.952Z,1513244352.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:13.173Z,1513244353.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:13.327Z,1513244353.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:13.352Z,1513244353.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:13.727Z,1513244353.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:13.758Z,1513244353.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:13.970Z,1513244353.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:14.130Z,1513244354.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:14.157Z,1513244354.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:14.526Z,1513244354.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:14.562Z,1513244354.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:14.766Z,1513244354.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:14.926Z,1513244354.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:14.961Z,1513244354.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:15.169Z,1513244355.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:15.347Z,1513244355.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:15.367Z,1513244355.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:15.727Z,1513244355.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:15.803Z,1513244355.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:15.968Z,1513244355.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:16.133Z,1513244356.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:16.148Z,1513244356.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:16.533Z,1513244356.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:16.607Z,1513244356.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:16.768Z,1513244356.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:16.928Z,1513244356.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:16.991Z,1513244356.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:17.173Z,1513244357.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:17.331Z,1513244357.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:17.346Z,1513244357.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:17.734Z,1513244357.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:17.771Z,1513244357.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:17.969Z,1513244357.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:18.142Z,1513244358.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:18.156Z,1513244358.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:18.536Z,1513244358.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:18.595Z,1513244358.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:18.765Z,1513244358.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:18.970Z,1513244358.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:19.002Z,1513244359.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:19.169Z,1513244359.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:19.326Z,1513244359.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:19.359Z,1513244359.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:19.723Z,1513244359.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:19.754Z,1513244359.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:19.966Z,1513244359.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:20.126Z,1513244360.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:20.163Z,1513244360.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:20.524Z,1513244360.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:20.549Z,1513244360.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:20.763Z,1513244360.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:20.926Z,1513244360.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:20.953Z,1513244360.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:21.173Z,1513244361.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:21.326Z,1513244361.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:21.360Z,1513244361.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:21.730Z,1513244361.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:21.755Z,1513244361.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:21.969Z,1513244361.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:22.158Z,1513244362.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:22.181Z,1513244362.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:22.540Z,1513244362.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:22.567Z,1513244362.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:22.767Z,1513244362.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:22.936Z,1513244362.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:22.967Z,1513244362.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:23.181Z,1513244363.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:23.327Z,1513244363.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:23.342Z,1513244363.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:23.734Z,1513244363.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:23.748Z,1513244363.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:23.977Z,1513244363.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:24.127Z,1513244364.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:24.142Z,1513244364.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:24.530Z,1513244364.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:24.544Z,1513244364.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:24.773Z,1513244364.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:24.933Z,1513244364.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:24.948Z,1513244364.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:25.177Z,1513244365.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:25.385Z,1513244365.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:25.434Z,1513244365.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:25.732Z,1513244365.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:25.747Z,1513244365.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:25.974Z,1513244365.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:26.132Z,1513244366.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:26.160Z,1513244366.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:26.536Z,1513244366.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:26.550Z,1513244366.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:26.769Z,1513244366.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:26.938Z,1513244366.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:26.995Z,1513244366.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:27.173Z,1513244367.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:27.333Z,1513244367.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:27.347Z,1513244367.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:27.734Z,1513244367.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:27.749Z,1513244367.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:27.969Z,1513244367.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:28.134Z,1513244368.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:28.149Z,1513244368.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:28.564Z,1513244368.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:28.607Z,1513244368.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:28.766Z,1513244368.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:28.946Z,1513244368.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:28.976Z,1513244368.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:29.169Z,1513244369.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:29.333Z,1513244369.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:29.348Z,1513244369.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:29.737Z,1513244369.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:29.752Z,1513244369.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:29.965Z,1513244369.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:30.126Z,1513244370.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:30.143Z,1513244370.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:30.536Z,1513244370.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:30.551Z,1513244370.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:30.764Z,1513244370.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:30.938Z,1513244370.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:30.953Z,1513244370.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:31.169Z,1513244371.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:31.332Z,1513244371.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:31.347Z,1513244371.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:31.777Z,1513244371.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:31.796Z,1513244371.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:31.966Z,1513244371.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:32.134Z,1513244372.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:32.150Z,1513244372.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:32.534Z,1513244372.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:32.557Z,1513244372.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:32.764Z,1513244372.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:32.932Z,1513244372.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:32.947Z,1513244372.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:33.169Z,1513244373.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:33.328Z,1513244373.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:33.359Z,1513244373.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:33.735Z,1513244373.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:33.749Z,1513244373.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:33.965Z,1513244373.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:34.135Z,1513244374.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:34.151Z,1513244374.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:34.535Z,1513244374.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:34.555Z,1513244374.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:34.763Z,1513244374.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:34.962Z,1513244374.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:34.991Z,1513244374.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:35.181Z,1513244375.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:35.332Z,1513244375.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:35.351Z,1513244375.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:35.739Z,1513244375.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:35.759Z,1513244375.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:35.978Z,1513244375.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:36.138Z,1513244376.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:36.153Z,1513244376.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:36.534Z,1513244376.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:36.549Z,1513244376.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:36.775Z,1513244376.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:36.928Z,1513244376.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:36.951Z,1513244376.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:37.197Z,1513244377.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:37.333Z,1513244377.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:37.348Z,1513244377.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:37.739Z,1513244377.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:37.759Z,1513244377.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:37.994Z,1513244377.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:38.164Z,1513244378.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:38.201Z,1513244378.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:38.545Z,1513244378.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:38.560Z,1513244378.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:38.789Z,1513244378.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:38.930Z,1513244378.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:39.014Z,1513244379.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:39.193Z,1513244379.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:39.338Z,1513244379.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:39.353Z,1513244379.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:39.726Z,1513244379.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:39.775Z,1513244379.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:39.989Z,1513244379.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:40.137Z,1513244380.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:40.151Z,1513244380.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:40.545Z,1513244380.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:40.602Z,1513244380.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:40.785Z,1513244380.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:40.943Z,1513244380.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:40.958Z,1513244380.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:41.189Z,1513244381.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:41.356Z,1513244381.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:41.404Z,1513244381.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:41.732Z,1513244381.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:41.763Z,1513244381.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:41.988Z,1513244381.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:42.127Z,1513244382.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:42.151Z,1513244382.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:42.527Z,1513244382.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:42.552Z,1513244382.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:42.781Z,1513244382.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:42.951Z,1513244382.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:42.966Z,1513244382.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:43.185Z,1513244383.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:43.327Z,1513244383.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:43.359Z,1513244383.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:43.731Z,1513244383.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:43.755Z,1513244383.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:43.981Z,1513244383.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:44.126Z,1513244384.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:44.163Z,1513244384.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:44.562Z,1513244384.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:44.615Z,1513244384.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:44.777Z,1513244384.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:44.927Z,1513244384.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:44.958Z,1513244384.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:45.181Z,1513244385.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:45.326Z,1513244385.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:45.357Z,1513244385.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:45.730Z,1513244385.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:45.744Z,1513244385.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:45.977Z,1513244385.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:46.120Z,1513244386.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:46.134Z,1513244386.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:46.534Z,1513244386.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:46.575Z,1513244386.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:46.773Z,1513244386.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:46.942Z,1513244386.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:46.964Z,1513244386.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:47.177Z,1513244387.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:47.327Z,1513244387.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:47.342Z,1513244387.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:47.770Z,1513244387.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:47.791Z,1513244387.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:47.973Z,1513244387.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:48.132Z,1513244388.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:48.166Z,1513244388.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:48.527Z,1513244388.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:48.541Z,1513244388.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:48.771Z,1513244388.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:48.933Z,1513244388.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:48.988Z,1513244388.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:49.181Z,1513244389.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:49.334Z,1513244389.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:49.348Z,1513244389.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:49.735Z,1513244389.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:49.766Z,1513244389.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:49.977Z,1513244389.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:50.130Z,1513244390.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:50.145Z,1513244390.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:50.524Z,1513244390.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:50.538Z,1513244390.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:50.775Z,1513244390.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:50.959Z,1513244390.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:50.983Z,1513244390.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:51.181Z,1513244391.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:51.338Z,1513244391.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:51.352Z,1513244391.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:51.727Z,1513244391.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:51.742Z,1513244391.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:51.977Z,1513244391.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:52.126Z,1513244392.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:52.142Z,1513244392.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:52.538Z,1513244392.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:52.552Z,1513244392.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:52.773Z,1513244392.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:52.935Z,1513244392.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:52.971Z,1513244392.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:53.177Z,1513244393.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:53.326Z,1513244393.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:53.349Z,1513244393.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:53.730Z,1513244393.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:53.744Z,1513244393.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:53.975Z,1513244393.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:54.127Z,1513244394.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:54.176Z,1513244394.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:54.533Z,1513244394.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:54.555Z,1513244394.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:54.769Z,1513244394.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:54.938Z,1513244394.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:54.954Z,1513244394.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:55.173Z,1513244395.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:55.336Z,1513244395.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:55.350Z,1513244395.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:55.736Z,1513244395.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:55.751Z,1513244395.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:55.970Z,1513244395.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:56.135Z,1513244396.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:56.150Z,1513244396.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:56.534Z,1513244396.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:56.555Z,1513244396.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:56.768Z,1513244396.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:56.929Z,1513244396.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:56.960Z,1513244396.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:57.173Z,1513244397.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:57.378Z,1513244397.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:57.396Z,1513244397.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:57.734Z,1513244397.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:57.755Z,1513244397.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:57.970Z,1513244397.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:58.130Z,1513244398.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:58.159Z,1513244398.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:58.546Z,1513244398.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:58.585Z,1513244398.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:39:58.769Z,1513244398.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:59.173Z,1513244399.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:39:59.970Z,1513244399.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:00.767Z,1513244400.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:01.173Z,1513244401.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:01.958Z,1513244401.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:01.974Z,1513244401.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:02.052Z,1513244402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:02.143Z,1513244402.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:02.186Z,1513244402.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:02.522Z,1513244402.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:02.552Z,1513244402.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:02.771Z,1513244402.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:02.931Z,1513244402.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:02.990Z,1513244402.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:03.205Z,1513244403.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:03.332Z,1513244403.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:03.346Z,1513244403.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:03.750Z,1513244403.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:03.806Z,1513244403.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:04.001Z,1513244404.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:04.126Z,1513244404.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:04.144Z,1513244404.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:04.515Z,1513244404.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:04.546Z,1513244404.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:04.798Z,1513244404.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:04.918Z,1513244404.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:04.943Z,1513244404.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:05.201Z,1513244405.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:05.318Z,1513244405.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:05.351Z,1513244405.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:05.719Z,1513244405.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:05.745Z,1513244405.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:05.998Z,1513244405.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:06.137Z,1513244406.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:06.151Z,1513244406.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:06.530Z,1513244406.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:06.545Z,1513244406.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:06.793Z,1513244406.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:06.978Z,1513244406.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:07.001Z,1513244407.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:07.197Z,1513244407.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:07.323Z,1513244407.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:07.348Z,1513244407.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:07.719Z,1513244407.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:07.745Z,1513244407.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:07.993Z,1513244407.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:08.116Z,1513244408.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:08.156Z,1513244408.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:08.519Z,1513244408.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:08.555Z,1513244408.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:08.789Z,1513244408.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:08.919Z,1513244408.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:08.946Z,1513244408.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:09.193Z,1513244409.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:09.315Z,1513244409.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:09.355Z,1513244409.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:09.718Z,1513244409.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:09.736Z,1513244409.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:09.989Z,1513244409.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:10.146Z,1513244410.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:10.175Z,1513244410.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:10.522Z,1513244410.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:10.557Z,1513244410.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:10.785Z,1513244410.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:10.931Z,1513244410.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:10.964Z,1513244410.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:11.191Z,1513244411.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:11.326Z,1513244411.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:11.364Z,1513244411.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:11.719Z,1513244411.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:11.734Z,1513244411.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:11.985Z,1513244411.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:12.126Z,1513244412.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:12.172Z,1513244412.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:12.522Z,1513244412.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:12.543Z,1513244412.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:12.781Z,1513244412.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:12.926Z,1513244412.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:12.943Z,1513244412.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:13.185Z,1513244413.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:13.343Z,1513244413.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:13.386Z,1513244413.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:13.725Z,1513244413.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:13.747Z,1513244413.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:13.981Z,1513244413.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:14.128Z,1513244414.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:14.143Z,1513244414.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:14.531Z,1513244414.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:14.552Z,1513244414.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:14.777Z,1513244414.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:14.918Z,1513244414.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:14.944Z,1513244414.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:15.181Z,1513244415.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:15.314Z,1513244415.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:15.351Z,1513244415.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:15.723Z,1513244415.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:15.749Z,1513244415.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:15.977Z,1513244415.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:16.118Z,1513244416.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:16.147Z,1513244416.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:16.584Z,1513244416.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:16.609Z,1513244416.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:16.776Z,1513244416.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:16.918Z,1513244416.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:16.950Z,1513244416.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:17.193Z,1513244417.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:17.318Z,1513244417.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:17.349Z,1513244417.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:17.716Z,1513244417.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:17.743Z,1513244417.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:17.989Z,1513244417.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:18.123Z,1513244418.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:18.154Z,1513244418.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:18.518Z,1513244418.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:18.556Z,1513244418.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:18.787Z,1513244418.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:18.918Z,1513244418.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:18.956Z,1513244418.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:19.193Z,1513244419.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:19.326Z,1513244419.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:19.351Z,1513244419.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:19.761Z,1513244419.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:19.803Z,1513244419.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:19.990Z,1513244419.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:20.130Z,1513244420.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:20.156Z,1513244420.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:20.523Z,1513244420.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:20.555Z,1513244420.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:20.785Z,1513244420.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:20.919Z,1513244420.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:20.955Z,1513244420.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:21.189Z,1513244421.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:21.319Z,1513244421.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:21.346Z,1513244421.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:21.723Z,1513244421.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:21.759Z,1513244421.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:21.985Z,1513244421.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:22.127Z,1513244422.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:22.161Z,1513244422.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:22.523Z,1513244422.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:22.543Z,1513244422.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:22.781Z,1513244422.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:22.931Z,1513244422.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:22.971Z,1513244422.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:23.185Z,1513244423.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:23.336Z,1513244423.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:23.366Z,1513244423.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:23.726Z,1513244423.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:23.743Z,1513244423.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:23.981Z,1513244423.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:24.124Z,1513244424.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:24.190Z,1513244424.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:24.526Z,1513244424.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:24.593Z,1513244424.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:24.777Z,1513244424.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:24.927Z,1513244424.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:24.950Z,1513244424.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:25.181Z,1513244425.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:25.330Z,1513244425.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:25.386Z,1513244425.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:25.727Z,1513244425.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:25.741Z,1513244425.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:25.977Z,1513244425.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:26.143Z,1513244426.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:26.195Z,1513244426.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:26.525Z,1513244426.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:26.547Z,1513244426.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:26.773Z,1513244426.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:26.922Z,1513244426.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:26.952Z,1513244426.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:27.177Z,1513244427.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:27.315Z,1513244427.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:27.350Z,1513244427.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:27.731Z,1513244427.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:27.745Z,1513244427.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:27.973Z,1513244427.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:28.126Z,1513244428.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:28.140Z,1513244428.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:28.539Z,1513244428.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:28.559Z,1513244428.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:28.773Z,1513244428.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:28.930Z,1513244428.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:28.944Z,1513244428.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:29.177Z,1513244429.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:29.346Z,1513244429.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:29.399Z,1513244429.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:29.727Z,1513244429.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:29.742Z,1513244429.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:29.973Z,1513244429.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:30.127Z,1513244430.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:30.141Z,1513244430.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:30.530Z,1513244430.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:30.544Z,1513244430.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:30.778Z,1513244430.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:30.925Z,1513244430.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:30.946Z,1513244430.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:31.193Z,1513244431.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:31.325Z,1513244431.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:31.339Z,1513244431.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:31.730Z,1513244431.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:31.744Z,1513244431.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:31.989Z,1513244431.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:32.115Z,1513244432.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:32.146Z,1513244432.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:32.519Z,1513244432.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:32.543Z,1513244432.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:32.787Z,1513244432.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:32.919Z,1513244432.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:32.945Z,1513244432.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:33.193Z,1513244433.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:33.318Z,1513244433.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:33.347Z,1513244433.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:33.718Z,1513244433.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:33.741Z,1513244433.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:33.990Z,1513244433.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:34.114Z,1513244434.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:34.144Z,1513244434.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:34.518Z,1513244434.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:34.579Z,1513244434.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:34.785Z,1513244434.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:34.918Z,1513244434.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:34.957Z,1513244434.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:35.189Z,1513244435.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:35.319Z,1513244435.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:35.344Z,1513244435.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:35.730Z,1513244435.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:35.745Z,1513244435.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:35.986Z,1513244435.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:36.118Z,1513244436.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:36.148Z,1513244436.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:36.529Z,1513244436.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:36.543Z,1513244436.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:36.781Z,1513244436.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:36.918Z,1513244436.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:36.951Z,1513244436.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:37.185Z,1513244437.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:37.322Z,1513244437.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:37.347Z,1513244437.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:37.719Z,1513244437.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:37.744Z,1513244437.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:37.981Z,1513244437.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:38.115Z,1513244438.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:38.151Z,1513244438.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:38.518Z,1513244438.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:38.551Z,1513244438.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:38.780Z,1513244438.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:38.918Z,1513244438.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:38.951Z,1513244438.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:39.185Z,1513244439.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:39.318Z,1513244439.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:39.349Z,1513244439.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:39.718Z,1513244439.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:39.732Z,1513244439.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:39.983Z,1513244439.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:40.119Z,1513244440.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:40.149Z,1513244440.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:40.517Z,1513244440.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:40.563Z,1513244440.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:40.777Z,1513244440.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:40.925Z,1513244440.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:40.940Z,1513244440.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:41.181Z,1513244441.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:41.325Z,1513244441.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:41.421Z,1513244441.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:41.720Z,1513244441.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:41.735Z,1513244441.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:41.978Z,1513244441.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:42.159Z,1513244442.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:42.215Z,1513244442.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:42.525Z,1513244442.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:42.571Z,1513244442.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:42.773Z,1513244442.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:42.929Z,1513244442.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:42.944Z,1513244442.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:43.177Z,1513244443.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:43.326Z,1513244443.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:43.340Z,1513244443.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:43.726Z,1513244443.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:43.741Z,1513244443.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:44.127Z,1513244444.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:44.142Z,1513244444.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:44.527Z,1513244444.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:44.542Z,1513244444.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:44.929Z,1513244444.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:44.944Z,1513244444.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:45.352Z,1513244445.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:45.392Z,1513244445.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:45.728Z,1513244445.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:45.751Z,1513244445.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:46.127Z,1513244446.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:46.142Z,1513244446.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:46.529Z,1513244446.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:46.595Z,1513244446.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:46.919Z,1513244446.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:46.946Z,1513244446.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:47.331Z,1513244447.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:47.352Z,1513244447.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:47.730Z,1513244447.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:47.746Z,1513244447.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:48.118Z,1513244448.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:48.144Z,1513244448.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:48.543Z,1513244448.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:48.563Z,1513244448.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:48.919Z,1513244448.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:48.955Z,1513244448.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:49.322Z,1513244449.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:49.355Z,1513244449.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:49.722Z,1513244449.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:49.730Z,1513244449.730 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:40:49.730Z,1513244449.730 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:40:49.730Z,1513244449.730 [BPC1](ERROR): Communications Fault
2017-12-14T09:40:49.755Z,1513244449.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:49.793Z,1513244449.793 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:40:50.118Z,1513244450.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:50.133Z,1513244450.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:50.518Z,1513244450.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:50.539Z,1513244450.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:50.927Z,1513244450.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:50.962Z,1513244450.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:50.977Z,1513244450.977 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:40:50.977Z,1513244450.977 [BPC1] No Fault, FailCount= 1
2017-12-14T09:40:51.319Z,1513244451.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:51.403Z,1513244451.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:51.767Z,1513244451.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:51.810Z,1513244451.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:52.123Z,1513244452.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:52.143Z,1513244452.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:52.534Z,1513244452.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:52.548Z,1513244452.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:52.921Z,1513244452.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:52.948Z,1513244452.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:53.330Z,1513244453.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:53.345Z,1513244453.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:53.726Z,1513244453.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:53.741Z,1513244453.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:54.125Z,1513244454.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:54.140Z,1513244454.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:54.525Z,1513244454.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:54.539Z,1513244454.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:54.941Z,1513244454.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:54.988Z,1513244454.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:55.327Z,1513244455.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:55.347Z,1513244455.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:55.734Z,1513244455.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:55.755Z,1513244455.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:56.130Z,1513244456.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:56.145Z,1513244456.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:56.541Z,1513244456.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:56.563Z,1513244456.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:56.928Z,1513244456.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:56.948Z,1513244456.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:57.326Z,1513244457.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:57.341Z,1513244457.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:57.730Z,1513244457.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:57.745Z,1513244457.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:58.138Z,1513244458.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:58.165Z,1513244458.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:58.518Z,1513244458.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:58.555Z,1513244458.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:40:58.931Z,1513244458.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:40:58.956Z,1513244458.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:02.328Z,1513244462.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:02.376Z,1513244462.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:02.526Z,1513244462.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:02.563Z,1513244462.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:02.902Z,1513244462.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:02.933Z,1513244462.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:03.297Z,1513244463.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:03.312Z,1513244463.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:03.690Z,1513244463.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:03.724Z,1513244463.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:04.106Z,1513244464.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:04.120Z,1513244464.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:04.531Z,1513244464.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:04.583Z,1513244464.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:04.890Z,1513244464.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:04.915Z,1513244464.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:05.290Z,1513244465.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:05.315Z,1513244465.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:05.694Z,1513244465.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:05.717Z,1513244465.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:06.083Z,1513244466.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:06.108Z,1513244466.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:06.490Z,1513244466.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:06.524Z,1513244466.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:06.894Z,1513244466.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:06.919Z,1513244466.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:06.934Z,1513244466.934 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T09:41:06.934Z,1513244466.934 [NAL9602] No Fault, FailCount= 5
2017-12-14T09:41:07.274Z,1513244467.274 [NAL9602](INFO): Powering up NAL9602
2017-12-14T09:41:07.291Z,1513244467.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:07.325Z,1513244467.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:07.739Z,1513244467.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:07.772Z,1513244467.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:08.099Z,1513244468.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:08.119Z,1513244468.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:08.498Z,1513244468.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:08.513Z,1513244468.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:08.894Z,1513244468.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:08.921Z,1513244468.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:09.301Z,1513244469.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:09.315Z,1513244469.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:09.702Z,1513244469.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:09.717Z,1513244469.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:10.094Z,1513244470.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:10.115Z,1513244470.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:10.522Z,1513244470.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:10.557Z,1513244470.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:10.942Z,1513244470.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:10.970Z,1513244470.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:11.290Z,1513244471.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:11.316Z,1513244471.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:11.690Z,1513244471.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:11.714Z,1513244471.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:12.102Z,1513244472.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:12.116Z,1513244472.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:12.490Z,1513244472.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:12.516Z,1513244472.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:12.890Z,1513244472.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:12.967Z,1513244472.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:13.295Z,1513244473.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:13.322Z,1513244473.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:13.690Z,1513244473.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:13.734Z,1513244473.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:14.123Z,1513244474.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:14.190Z,1513244474.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:14.490Z,1513244474.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:14.565Z,1513244474.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:14.890Z,1513244474.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:14.917Z,1513244474.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:15.307Z,1513244475.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:15.347Z,1513244475.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:15.695Z,1513244475.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:15.721Z,1513244475.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:15.981Z,1513244475.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:16.090Z,1513244476.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:16.116Z,1513244476.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:16.491Z,1513244476.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:16.515Z,1513244476.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:16.777Z,1513244476.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:16.890Z,1513244476.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:16.915Z,1513244476.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:17.181Z,1513244477.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:17.340Z,1513244477.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:17.382Z,1513244477.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:17.718Z,1513244477.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:17.739Z,1513244477.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:17.977Z,1513244477.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:18.078Z,1513244478.078 [NAL9602](INFO): NAL9602 initialized
2017-12-14T09:41:18.096Z,1513244478.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:18.135Z,1513244478.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:18.492Z,1513244478.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:18.543Z,1513244478.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:18.794Z,1513244478.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:18.904Z,1513244478.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:18.939Z,1513244478.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:19.197Z,1513244479.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:19.315Z,1513244479.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:19.338Z,1513244479.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:19.703Z,1513244479.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:19.750Z,1513244479.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:19.994Z,1513244479.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:20.102Z,1513244480.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:20.164Z,1513244480.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:20.537Z,1513244480.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:20.580Z,1513244480.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:20.790Z,1513244480.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:20.905Z,1513244480.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:20.928Z,1513244480.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:21.193Z,1513244481.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:21.313Z,1513244481.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:21.353Z,1513244481.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:21.707Z,1513244481.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:21.747Z,1513244481.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:21.993Z,1513244481.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:22.131Z,1513244482.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:22.175Z,1513244482.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:22.523Z,1513244482.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:22.560Z,1513244482.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:22.791Z,1513244482.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:22.922Z,1513244482.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:22.955Z,1513244482.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:23.198Z,1513244483.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:23.323Z,1513244483.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:23.371Z,1513244483.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:23.707Z,1513244483.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:23.761Z,1513244483.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:24.096Z,1513244484.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:24.141Z,1513244484.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:24.542Z,1513244484.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:24.585Z,1513244484.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:24.924Z,1513244484.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:24.948Z,1513244484.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:25.337Z,1513244485.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:25.386Z,1513244485.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:25.707Z,1513244485.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:25.755Z,1513244485.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:26.091Z,1513244486.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:26.126Z,1513244486.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:26.494Z,1513244486.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:26.514Z,1513244486.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:26.893Z,1513244486.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:26.923Z,1513244486.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:27.326Z,1513244487.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:27.348Z,1513244487.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:27.731Z,1513244487.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:27.752Z,1513244487.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:28.127Z,1513244488.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:28.148Z,1513244488.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:28.515Z,1513244488.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:28.574Z,1513244488.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:28.899Z,1513244488.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:28.925Z,1513244488.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:29.292Z,1513244489.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:29.323Z,1513244489.323 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:29.323Z,1513244489.323 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183
2017-12-14T09:41:29.323Z,1513244489.323 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:41:29.345Z,1513244489.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:29.345Z,1513244489.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 183
2017-12-14T09:41:29.345Z,1513244489.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:41:29.347Z,1513244489.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:29.347Z,1513244489.347 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183
2017-12-14T09:41:29.347Z,1513244489.347 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:41:29.367Z,1513244489.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:41:29.368Z,1513244489.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:41:29.368Z,1513244489.368 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:41:29.691Z,1513244489.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:29.742Z,1513244489.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:41:29.742Z,1513244489.742 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183
2017-12-14T09:41:29.743Z,1513244489.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:41:29.743Z,1513244489.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 183
2017-12-14T09:41:29.743Z,1513244489.743 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:41:29.743Z,1513244489.743 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183
2017-12-14T09:41:29.988Z,1513244489.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:30.102Z,1513244490.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:30.146Z,1513244490.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:41:30.146Z,1513244490.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:41:30.147Z,1513244490.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:41:30.147Z,1513244490.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:41:30.148Z,1513244490.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:41:30.148Z,1513244490.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:41:30.148Z,1513244490.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:41:30.161Z,1513244490.161 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:41:30.161Z,1513244490.161 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:41:30.514Z,1513244490.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:30.571Z,1513244490.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:30.806Z,1513244490.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:30.935Z,1513244490.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:30.976Z,1513244490.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:31.209Z,1513244491.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:31.317Z,1513244491.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:31.340Z,1513244491.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:31.704Z,1513244491.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:31.742Z,1513244491.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:32.008Z,1513244492.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:32.092Z,1513244492.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:32.146Z,1513244492.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:32.496Z,1513244492.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:32.539Z,1513244492.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:32.802Z,1513244492.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:32.903Z,1513244492.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:32.927Z,1513244492.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:33.205Z,1513244493.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:33.317Z,1513244493.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:33.356Z,1513244493.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:33.713Z,1513244493.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:33.765Z,1513244493.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:34.002Z,1513244494.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:34.108Z,1513244494.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:34.146Z,1513244494.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:34.504Z,1513244494.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:34.604Z,1513244494.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:34.798Z,1513244494.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:34.914Z,1513244494.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:34.971Z,1513244494.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:35.202Z,1513244495.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:35.317Z,1513244495.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:35.366Z,1513244495.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:35.703Z,1513244495.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:35.787Z,1513244495.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:35.999Z,1513244495.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:36.093Z,1513244496.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:36.155Z,1513244496.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:36.511Z,1513244496.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:36.589Z,1513244496.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:36.794Z,1513244496.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:36.908Z,1513244496.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:37.027Z,1513244497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:37.198Z,1513244497.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:37.325Z,1513244497.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:37.347Z,1513244497.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:37.723Z,1513244497.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:37.772Z,1513244497.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:38.115Z,1513244498.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:38.164Z,1513244498.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:38.516Z,1513244498.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:38.552Z,1513244498.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:38.920Z,1513244498.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:38.962Z,1513244498.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:39.302Z,1513244499.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:39.352Z,1513244499.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:39.707Z,1513244499.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:39.756Z,1513244499.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:40.107Z,1513244500.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:40.152Z,1513244500.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:40.507Z,1513244500.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:40.552Z,1513244500.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:40.914Z,1513244500.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:40.950Z,1513244500.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:41.300Z,1513244501.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:41.323Z,1513244501.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:41.692Z,1513244501.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:41.723Z,1513244501.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:42.093Z,1513244502.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:42.131Z,1513244502.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:42.492Z,1513244502.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:42.534Z,1513244502.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:42.915Z,1513244502.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:42.934Z,1513244502.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:43.308Z,1513244503.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:43.341Z,1513244503.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:43.703Z,1513244503.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:43.739Z,1513244503.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:44.095Z,1513244504.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:44.137Z,1513244504.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:44.505Z,1513244504.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:44.520Z,1513244504.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:44.914Z,1513244504.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:44.953Z,1513244504.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:45.301Z,1513244505.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:45.369Z,1513244505.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:45.720Z,1513244505.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:45.773Z,1513244505.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:46.114Z,1513244506.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:46.163Z,1513244506.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:46.512Z,1513244506.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:46.531Z,1513244506.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:46.932Z,1513244506.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:46.967Z,1513244506.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:47.291Z,1513244507.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:47.318Z,1513244507.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:47.691Z,1513244507.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:47.719Z,1513244507.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:48.103Z,1513244508.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:48.119Z,1513244508.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:48.492Z,1513244508.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:48.519Z,1513244508.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:48.915Z,1513244508.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:48.930Z,1513244508.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:49.317Z,1513244509.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:49.332Z,1513244509.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:49.717Z,1513244509.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:49.732Z,1513244509.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:50.084Z,1513244510.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:50.127Z,1513244510.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:50.492Z,1513244510.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:50.507Z,1513244510.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:50.899Z,1513244510.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:50.931Z,1513244510.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:51.298Z,1513244511.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:51.313Z,1513244511.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:51.710Z,1513244511.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:51.732Z,1513244511.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:52.110Z,1513244512.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:52.132Z,1513244512.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:52.527Z,1513244512.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:52.541Z,1513244512.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:52.898Z,1513244512.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:52.913Z,1513244512.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:53.314Z,1513244513.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:53.345Z,1513244513.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:53.702Z,1513244513.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:53.717Z,1513244513.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:54.103Z,1513244514.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:54.119Z,1513244514.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:54.514Z,1513244514.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:54.528Z,1513244514.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:54.905Z,1513244514.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:54.921Z,1513244514.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:55.304Z,1513244515.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:55.327Z,1513244515.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:55.696Z,1513244515.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:55.725Z,1513244515.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:56.107Z,1513244516.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:56.127Z,1513244516.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:56.523Z,1513244516.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:56.554Z,1513244516.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:56.915Z,1513244516.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:56.967Z,1513244516.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:57.320Z,1513244517.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:57.342Z,1513244517.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:57.724Z,1513244517.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:57.740Z,1513244517.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:41:57.743Z,1513244517.743 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:36:57.7Z
2017-12-14T09:41:57.744Z,1513244517.744 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:41:57.744Z,1513244517.744 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:41:58.092Z,1513244518.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:41:58.119Z,1513244518.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:05.566Z,1513244525.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:05.575Z,1513244525.575 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:42:05.575Z,1513244525.575 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:42:05.575Z,1513244525.575 [BPC1](ERROR): Communications Fault
2017-12-14T09:42:05.583Z,1513244525.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:05.609Z,1513244525.609 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:42:05.688Z,1513244525.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:05.726Z,1513244525.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:09.387Z,1513244529.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:09.423Z,1513244529.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:09.489Z,1513244529.489 [DataOverHttps](INFO): Sending 86 bytes from file Logs/20171214T002839/Courier0212.lzma
2017-12-14T09:42:09.525Z,1513244529.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:09.564Z,1513244529.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:09.578Z,1513244529.578 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:42:09.578Z,1513244529.578 [BPC1] No Fault, FailCount= 1
2017-12-14T09:42:09.882Z,1513244529.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:09.975Z,1513244529.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:10.252Z,1513244530.252 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0212.lzma.bak
2017-12-14T09:42:10.252Z,1513244530.252 [DataOverHttps](INFO): SBD MOMSN=5438413
2017-12-14T09:42:10.291Z,1513244530.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:10.325Z,1513244530.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:11.617Z,1513244531.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:11.632Z,1513244531.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:11.731Z,1513244531.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:11.772Z,1513244531.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:15.270Z,1513244535.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:15.285Z,1513244535.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:15.398Z,1513244535.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:15.424Z,1513244535.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:15.753Z,1513244535.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:15.786Z,1513244535.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:16.143Z,1513244536.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:16.163Z,1513244536.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:16.532Z,1513244536.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:16.557Z,1513244536.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:16.954Z,1513244536.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:16.969Z,1513244536.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:20.326Z,1513244540.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:20.376Z,1513244540.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:20.500Z,1513244540.500 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0213.lzma
2017-12-14T09:42:20.544Z,1513244540.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:20.592Z,1513244540.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:20.866Z,1513244540.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:20.888Z,1513244540.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:21.232Z,1513244541.232 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0213.lzma.bak
2017-12-14T09:42:21.232Z,1513244541.232 [DataOverHttps](INFO): SBD MOMSN=5438416
2017-12-14T09:42:21.264Z,1513244541.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:21.295Z,1513244541.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:22.502Z,1513244542.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:22.517Z,1513244542.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:22.520Z,1513244542.520 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:42:22.520Z,1513244542.520 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:42:22.520Z,1513244542.520 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:42:22.615Z,1513244542.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:22.654Z,1513244542.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:26.098Z,1513244546.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:26.113Z,1513244546.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:26.221Z,1513244546.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:26.263Z,1513244546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:26.599Z,1513244546.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:26.619Z,1513244546.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:26.968Z,1513244546.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:26.995Z,1513244546.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:27.367Z,1513244547.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:27.400Z,1513244547.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:27.762Z,1513244547.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:27.776Z,1513244547.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:28.167Z,1513244548.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:28.201Z,1513244548.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:28.601Z,1513244548.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:28.628Z,1513244548.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:28.987Z,1513244548.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:29.003Z,1513244549.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:29.377Z,1513244549.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:29.408Z,1513244549.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:29.764Z,1513244549.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:29.779Z,1513244549.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:30.165Z,1513244550.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:30.179Z,1513244550.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:30.567Z,1513244550.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:30.603Z,1513244550.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:30.961Z,1513244550.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:31.066Z,1513244551.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:31.366Z,1513244551.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:31.408Z,1513244551.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:31.820Z,1513244551.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:31.867Z,1513244551.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:32.166Z,1513244552.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:32.180Z,1513244552.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:32.573Z,1513244552.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:32.595Z,1513244552.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:32.981Z,1513244552.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:32.996Z,1513244552.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:33.359Z,1513244553.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:33.395Z,1513244553.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:33.763Z,1513244553.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:33.794Z,1513244553.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:34.163Z,1513244554.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:34.194Z,1513244554.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:34.570Z,1513244554.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:34.596Z,1513244554.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:34.981Z,1513244554.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:35.002Z,1513244555.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:35.370Z,1513244555.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:35.390Z,1513244555.390 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:42:35.390Z,1513244555.390 [BPC1] Communications Fault, FailCount= 2
2017-12-14T09:42:35.390Z,1513244555.390 [BPC1](ERROR): Communications Fault
2017-12-14T09:42:35.398Z,1513244555.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:35.411Z,1513244555.411 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:42:35.761Z,1513244555.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:35.799Z,1513244555.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:36.158Z,1513244556.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:36.196Z,1513244556.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:36.569Z,1513244556.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:36.599Z,1513244556.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:36.613Z,1513244556.613 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:42:36.613Z,1513244556.613 [BPC1] No Fault, FailCount= 2
2017-12-14T09:42:36.982Z,1513244556.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:37.047Z,1513244557.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:37.382Z,1513244557.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:37.403Z,1513244557.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:37.764Z,1513244557.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:37.813Z,1513244557.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:38.156Z,1513244558.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:38.172Z,1513244558.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:38.558Z,1513244558.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:38.602Z,1513244558.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:38.962Z,1513244558.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:39.001Z,1513244559.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:39.371Z,1513244559.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:39.404Z,1513244559.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:39.777Z,1513244559.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:39.807Z,1513244559.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:40.181Z,1513244560.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:40.211Z,1513244560.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:40.574Z,1513244560.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:40.602Z,1513244560.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:40.964Z,1513244560.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:40.979Z,1513244560.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:41.371Z,1513244561.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:41.410Z,1513244561.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:41.767Z,1513244561.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:41.782Z,1513244561.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:42.177Z,1513244562.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:42.219Z,1513244562.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:42.580Z,1513244562.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:42.595Z,1513244562.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:42.981Z,1513244562.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:43.002Z,1513244563.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:43.378Z,1513244563.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:43.407Z,1513244563.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:43.762Z,1513244563.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:43.777Z,1513244563.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:44.162Z,1513244564.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:44.189Z,1513244564.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:44.568Z,1513244564.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:44.587Z,1513244564.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:44.974Z,1513244564.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:44.990Z,1513244564.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:45.394Z,1513244565.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:45.459Z,1513244565.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:45.805Z,1513244565.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:45.819Z,1513244565.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:46.174Z,1513244566.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:46.189Z,1513244566.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:46.572Z,1513244566.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:46.627Z,1513244566.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:46.966Z,1513244566.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:46.986Z,1513244566.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:47.373Z,1513244567.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:47.388Z,1513244567.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:47.768Z,1513244567.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:47.783Z,1513244567.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:48.169Z,1513244568.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:48.184Z,1513244568.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:48.577Z,1513244568.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:48.614Z,1513244568.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:48.977Z,1513244568.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:48.999Z,1513244568.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:49.390Z,1513244569.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:49.486Z,1513244569.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:49.768Z,1513244569.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:49.783Z,1513244569.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:50.162Z,1513244570.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:50.195Z,1513244570.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:50.566Z,1513244570.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:50.587Z,1513244570.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:50.968Z,1513244570.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:50.983Z,1513244570.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:51.367Z,1513244571.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:51.381Z,1513244571.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:51.803Z,1513244571.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:51.846Z,1513244571.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:52.228Z,1513244572.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:52.244Z,1513244572.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:52.577Z,1513244572.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:52.592Z,1513244572.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:52.982Z,1513244572.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:52.996Z,1513244572.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:53.359Z,1513244573.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:53.386Z,1513244573.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:53.761Z,1513244573.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:53.799Z,1513244573.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:54.159Z,1513244574.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:54.192Z,1513244574.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:54.579Z,1513244574.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:54.595Z,1513244574.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:54.995Z,1513244574.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:55.039Z,1513244575.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:55.370Z,1513244575.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:55.407Z,1513244575.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:55.807Z,1513244575.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:55.869Z,1513244575.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:56.157Z,1513244576.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:56.234Z,1513244576.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:56.571Z,1513244576.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:56.603Z,1513244576.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:56.986Z,1513244576.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:57.046Z,1513244577.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:57.370Z,1513244577.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:57.403Z,1513244577.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:57.759Z,1513244577.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:57.819Z,1513244577.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:58.157Z,1513244578.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:58.207Z,1513244578.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:58.567Z,1513244578.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:58.614Z,1513244578.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:58.982Z,1513244578.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:59.007Z,1513244579.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:59.381Z,1513244579.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:59.408Z,1513244579.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:42:59.767Z,1513244579.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:42:59.790Z,1513244579.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:00.170Z,1513244580.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:00.184Z,1513244580.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:00.568Z,1513244580.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:00.583Z,1513244580.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:00.967Z,1513244580.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:00.994Z,1513244580.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:01.383Z,1513244581.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:01.419Z,1513244581.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:01.779Z,1513244581.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:01.794Z,1513244581.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:02.185Z,1513244582.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:02.207Z,1513244582.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:02.577Z,1513244582.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:02.595Z,1513244582.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:03.028Z,1513244583.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:03.187Z,1513244583.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:03.352Z,1513244583.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:03.391Z,1513244583.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:03.759Z,1513244583.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:03.791Z,1513244583.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:04.155Z,1513244584.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:04.295Z,1513244584.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:04.580Z,1513244584.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:04.607Z,1513244584.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:04.982Z,1513244584.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:04.996Z,1513244584.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:05.388Z,1513244585.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:05.412Z,1513244585.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:05.550Z,1513244585.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:05.759Z,1513244585.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:05.795Z,1513244585.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:06.162Z,1513244586.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:06.209Z,1513244586.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:06.346Z,1513244586.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:06.562Z,1513244586.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:06.594Z,1513244586.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:06.959Z,1513244586.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:06.986Z,1513244586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:07.358Z,1513244587.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:07.395Z,1513244587.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:07.784Z,1513244587.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:07.843Z,1513244587.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:08.183Z,1513244588.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:08.241Z,1513244588.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:08.569Z,1513244588.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:08.604Z,1513244588.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:08.956Z,1513244588.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:08.970Z,1513244588.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:09.363Z,1513244589.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:09.394Z,1513244589.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:09.760Z,1513244589.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:09.787Z,1513244589.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:10.159Z,1513244590.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:10.174Z,1513244590.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:10.569Z,1513244590.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:10.597Z,1513244590.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:10.986Z,1513244590.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:11.007Z,1513244591.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:11.369Z,1513244591.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:11.398Z,1513244591.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:11.763Z,1513244591.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:11.798Z,1513244591.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:12.166Z,1513244592.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:12.202Z,1513244592.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:12.570Z,1513244592.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:12.598Z,1513244592.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:12.989Z,1513244592.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:13.007Z,1513244593.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:13.377Z,1513244593.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:13.407Z,1513244593.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:13.765Z,1513244593.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:13.779Z,1513244593.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:14.167Z,1513244594.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:14.199Z,1513244594.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:14.565Z,1513244594.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:14.580Z,1513244594.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:14.966Z,1513244594.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:14.980Z,1513244594.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:15.368Z,1513244595.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:15.401Z,1513244595.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:15.777Z,1513244595.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:15.803Z,1513244595.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:16.188Z,1513244596.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:16.208Z,1513244596.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:16.591Z,1513244596.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:16.606Z,1513244596.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:16.967Z,1513244596.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:17.011Z,1513244597.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:17.368Z,1513244597.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:17.482Z,1513244597.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:17.764Z,1513244597.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:17.850Z,1513244597.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:18.169Z,1513244598.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:18.184Z,1513244598.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:18.573Z,1513244598.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:18.623Z,1513244598.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:18.981Z,1513244598.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:19.004Z,1513244599.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:19.377Z,1513244599.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:19.435Z,1513244599.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:19.768Z,1513244599.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:19.782Z,1513244599.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:19.961Z,1513244599.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:20.161Z,1513244600.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:20.176Z,1513244600.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:20.567Z,1513244600.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:20.650Z,1513244600.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:20.759Z,1513244600.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:20.971Z,1513244600.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:20.985Z,1513244600.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:21.181Z,1513244601.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:21.371Z,1513244601.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:21.386Z,1513244601.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:21.782Z,1513244601.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:21.814Z,1513244601.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:21.977Z,1513244601.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:22.170Z,1513244602.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:22.185Z,1513244602.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:22.571Z,1513244602.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:22.587Z,1513244602.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:22.773Z,1513244602.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:22.973Z,1513244602.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:22.989Z,1513244602.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:23.177Z,1513244603.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:26.362Z,1513244606.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:26.451Z,1513244606.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:26.540Z,1513244606.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:26.579Z,1513244606.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:26.940Z,1513244606.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:26.956Z,1513244606.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:27.353Z,1513244607.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:27.387Z,1513244607.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:27.741Z,1513244607.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:27.787Z,1513244607.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:28.135Z,1513244608.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:28.159Z,1513244608.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:28.537Z,1513244608.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:28.551Z,1513244608.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:28.943Z,1513244608.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:28.959Z,1513244608.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:29.335Z,1513244609.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:29.355Z,1513244609.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:29.747Z,1513244609.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:29.767Z,1513244609.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:30.169Z,1513244610.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:30.195Z,1513244610.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:30.549Z,1513244610.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:30.564Z,1513244610.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:30.940Z,1513244610.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:30.959Z,1513244610.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:31.330Z,1513244611.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:31.363Z,1513244611.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:31.740Z,1513244611.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:31.754Z,1513244611.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:32.124Z,1513244612.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:32.152Z,1513244612.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:32.545Z,1513244612.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:32.564Z,1513244612.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:32.958Z,1513244612.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:32.979Z,1513244612.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:33.363Z,1513244613.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:33.403Z,1513244613.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:33.727Z,1513244613.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:33.744Z,1513244613.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:33.966Z,1513244613.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:34.131Z,1513244614.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:34.145Z,1513244614.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:34.541Z,1513244614.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:34.573Z,1513244614.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:34.763Z,1513244614.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:34.949Z,1513244614.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:34.975Z,1513244614.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:35.169Z,1513244615.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:35.349Z,1513244615.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:35.376Z,1513244615.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:35.739Z,1513244615.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:35.754Z,1513244615.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:35.966Z,1513244615.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:36.132Z,1513244616.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:36.151Z,1513244616.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:36.575Z,1513244616.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:36.607Z,1513244616.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:36.764Z,1513244616.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:36.953Z,1513244616.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:36.982Z,1513244616.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:37.169Z,1513244617.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:37.342Z,1513244617.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:37.356Z,1513244617.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:37.737Z,1513244617.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:37.752Z,1513244617.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:38.136Z,1513244618.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:38.151Z,1513244618.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:38.539Z,1513244618.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:38.649Z,1513244618.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:38.942Z,1513244618.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:38.957Z,1513244618.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:39.348Z,1513244619.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:39.364Z,1513244619.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:39.730Z,1513244619.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:39.811Z,1513244619.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:40.136Z,1513244620.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:40.155Z,1513244620.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:40.547Z,1513244620.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:40.567Z,1513244620.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:40.949Z,1513244620.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:40.999Z,1513244620.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:41.345Z,1513244621.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:41.360Z,1513244621.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:41.735Z,1513244621.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:41.775Z,1513244621.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:42.131Z,1513244622.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:42.151Z,1513244622.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:42.546Z,1513244622.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:42.560Z,1513244622.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:42.958Z,1513244622.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:43.005Z,1513244623.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:43.347Z,1513244623.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:43.362Z,1513244623.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:43.735Z,1513244623.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:43.755Z,1513244623.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:44.124Z,1513244624.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:44.147Z,1513244624.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:44.546Z,1513244624.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:44.560Z,1513244624.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:44.957Z,1513244624.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:44.982Z,1513244624.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:45.351Z,1513244625.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:45.365Z,1513244625.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:45.733Z,1513244625.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:45.759Z,1513244625.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:46.162Z,1513244626.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:46.216Z,1513244626.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:46.536Z,1513244626.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:46.561Z,1513244626.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:46.949Z,1513244626.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:46.963Z,1513244626.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:47.342Z,1513244627.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:47.368Z,1513244627.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:47.728Z,1513244627.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:47.762Z,1513244627.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:47.962Z,1513244627.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:48.128Z,1513244628.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:48.159Z,1513244628.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:48.542Z,1513244628.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:48.568Z,1513244628.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:48.758Z,1513244628.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:48.941Z,1513244628.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:48.977Z,1513244628.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:49.173Z,1513244629.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:49.389Z,1513244629.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:49.424Z,1513244629.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:49.727Z,1513244629.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:49.747Z,1513244629.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:49.969Z,1513244629.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:50.123Z,1513244630.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:50.175Z,1513244630.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:50.528Z,1513244630.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:50.543Z,1513244630.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:50.765Z,1513244630.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:50.933Z,1513244630.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:50.971Z,1513244630.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:51.169Z,1513244631.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:51.335Z,1513244631.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:51.349Z,1513244631.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:51.746Z,1513244631.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:51.780Z,1513244631.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:52.149Z,1513244632.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:52.173Z,1513244632.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:52.542Z,1513244632.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:52.556Z,1513244632.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:52.946Z,1513244632.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:52.961Z,1513244632.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:53.339Z,1513244633.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:53.354Z,1513244633.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:53.740Z,1513244633.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:53.756Z,1513244633.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:54.139Z,1513244634.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:54.154Z,1513244634.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:54.556Z,1513244634.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:54.586Z,1513244634.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:54.953Z,1513244634.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:54.980Z,1513244634.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:55.346Z,1513244635.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:55.361Z,1513244635.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:55.788Z,1513244635.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:55.835Z,1513244635.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:56.137Z,1513244636.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:56.151Z,1513244636.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:56.541Z,1513244636.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:56.556Z,1513244636.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:56.946Z,1513244636.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:56.962Z,1513244636.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:57.343Z,1513244637.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:57.357Z,1513244637.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:57.740Z,1513244637.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:57.756Z,1513244637.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:58.135Z,1513244638.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:58.159Z,1513244638.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:58.541Z,1513244638.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:58.560Z,1513244638.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:58.958Z,1513244638.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:58.996Z,1513244638.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:59.346Z,1513244639.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:59.364Z,1513244639.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:43:59.742Z,1513244639.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:43:59.757Z,1513244639.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:00.141Z,1513244640.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:00.156Z,1513244640.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:00.545Z,1513244640.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:00.560Z,1513244640.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:00.946Z,1513244640.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:00.962Z,1513244640.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:01.345Z,1513244641.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:01.354Z,1513244641.354 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T09:44:01.354Z,1513244641.354 [BPC1] Data Fault, FailCount= 1
2017-12-14T09:44:01.354Z,1513244641.354 [BPC1](ERROR): Data Fault
2017-12-14T09:44:01.362Z,1513244641.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:01.407Z,1513244641.407 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:44:01.741Z,1513244641.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:01.756Z,1513244641.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:01.969Z,1513244641.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:02.161Z,1513244642.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:02.191Z,1513244642.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:02.543Z,1513244642.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:02.571Z,1513244642.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:02.601Z,1513244642.601 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:44:02.601Z,1513244642.601 [BPC1] No Fault, FailCount= 1
2017-12-14T09:44:02.767Z,1513244642.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:02.949Z,1513244642.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:03.036Z,1513244643.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:03.180Z,1513244643.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:03.348Z,1513244643.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:03.364Z,1513244643.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:03.739Z,1513244643.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:03.754Z,1513244643.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:03.979Z,1513244643.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:04.133Z,1513244644.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:04.152Z,1513244644.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:04.547Z,1513244644.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:04.567Z,1513244644.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:04.773Z,1513244644.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:04.949Z,1513244644.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:04.968Z,1513244644.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:05.177Z,1513244645.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:05.376Z,1513244645.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:05.411Z,1513244645.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:05.726Z,1513244645.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:05.763Z,1513244645.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:06.131Z,1513244646.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:06.162Z,1513244646.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:06.526Z,1513244646.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:06.562Z,1513244646.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:06.940Z,1513244646.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:06.967Z,1513244646.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:07.322Z,1513244647.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:07.337Z,1513244647.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:07.742Z,1513244647.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:07.775Z,1513244647.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:08.141Z,1513244648.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:08.175Z,1513244648.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:08.544Z,1513244648.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:08.583Z,1513244648.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:08.927Z,1513244648.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:08.947Z,1513244648.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:09.331Z,1513244649.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:09.345Z,1513244649.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:09.730Z,1513244649.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:09.744Z,1513244649.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:10.135Z,1513244650.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:10.171Z,1513244650.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:10.538Z,1513244650.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:10.552Z,1513244650.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:10.950Z,1513244650.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:10.974Z,1513244650.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:11.346Z,1513244651.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:11.398Z,1513244651.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:11.772Z,1513244651.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:11.821Z,1513244651.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:12.139Z,1513244652.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:12.155Z,1513244652.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:12.547Z,1513244652.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:12.580Z,1513244652.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:12.949Z,1513244652.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:12.981Z,1513244652.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:13.350Z,1513244653.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:13.380Z,1513244653.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:13.735Z,1513244653.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:13.750Z,1513244653.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:14.136Z,1513244654.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:14.151Z,1513244654.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:14.535Z,1513244654.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:14.555Z,1513244654.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:14.953Z,1513244654.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:14.993Z,1513244654.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:15.337Z,1513244655.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:15.359Z,1513244655.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:15.738Z,1513244655.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:15.752Z,1513244655.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:15.974Z,1513244655.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:16.132Z,1513244656.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:16.159Z,1513244656.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:16.542Z,1513244656.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:16.557Z,1513244656.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:16.770Z,1513244656.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:16.946Z,1513244656.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:16.961Z,1513244656.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:17.185Z,1513244657.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:17.356Z,1513244657.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:17.372Z,1513244657.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:17.727Z,1513244657.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:17.753Z,1513244657.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:17.984Z,1513244657.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:18.146Z,1513244658.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:18.190Z,1513244658.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:18.558Z,1513244658.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:18.572Z,1513244658.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:18.777Z,1513244658.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:18.958Z,1513244658.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:18.979Z,1513244658.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:19.181Z,1513244659.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:19.347Z,1513244659.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:19.363Z,1513244659.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:19.376Z,1513244659.376 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T09:44:19.376Z,1513244659.376 [DropWeight] No Fault, FailCount= 1
2017-12-14T09:44:19.727Z,1513244659.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:19.759Z,1513244659.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:20.127Z,1513244660.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:20.159Z,1513244660.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:20.547Z,1513244660.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:20.562Z,1513244660.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:20.946Z,1513244660.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:20.972Z,1513244660.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:21.361Z,1513244661.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:21.414Z,1513244661.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:21.728Z,1513244661.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:21.759Z,1513244661.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:22.127Z,1513244662.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:22.179Z,1513244662.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:22.541Z,1513244662.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:22.567Z,1513244662.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:22.943Z,1513244662.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:22.979Z,1513244662.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:23.346Z,1513244663.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:23.395Z,1513244663.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:26.883Z,1513244666.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:26.899Z,1513244666.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:26.992Z,1513244666.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:27.033Z,1513244667.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:27.384Z,1513244667.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:27.399Z,1513244667.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:27.791Z,1513244667.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:27.829Z,1513244667.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:28.186Z,1513244668.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:28.231Z,1513244668.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:28.581Z,1513244668.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:28.595Z,1513244668.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:28.980Z,1513244668.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:29.028Z,1513244669.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:29.382Z,1513244669.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:29.398Z,1513244669.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:29.785Z,1513244669.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:29.800Z,1513244669.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:30.186Z,1513244670.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:30.200Z,1513244670.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:30.200Z,1513244670.200 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184
2017-12-14T09:44:30.200Z,1513244670.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:44:30.202Z,1513244670.202 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:30.202Z,1513244670.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 184
2017-12-14T09:44:30.202Z,1513244670.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:44:30.204Z,1513244670.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:30.204Z,1513244670.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184
2017-12-14T09:44:30.204Z,1513244670.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:44:30.242Z,1513244670.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:44:30.242Z,1513244670.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:44:30.243Z,1513244670.243 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:44:30.590Z,1513244670.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:30.627Z,1513244670.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:44:30.627Z,1513244670.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184
2017-12-14T09:44:30.627Z,1513244670.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:44:30.627Z,1513244670.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 184
2017-12-14T09:44:30.628Z,1513244670.628 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:44:30.628Z,1513244670.628 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184
2017-12-14T09:44:30.986Z,1513244670.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:31.003Z,1513244671.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:44:31.004Z,1513244671.004 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:44:31.004Z,1513244671.004 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:44:31.005Z,1513244671.005 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:44:31.005Z,1513244671.005 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:44:31.006Z,1513244671.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:44:31.006Z,1513244671.006 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:44:31.006Z,1513244671.006 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:44:31.007Z,1513244671.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:44:31.371Z,1513244671.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:31.408Z,1513244671.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:31.784Z,1513244671.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:31.799Z,1513244671.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:32.170Z,1513244672.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:32.209Z,1513244672.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:32.595Z,1513244672.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:32.610Z,1513244672.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:32.994Z,1513244672.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:33.008Z,1513244673.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:33.392Z,1513244673.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:33.406Z,1513244673.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:33.767Z,1513244673.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:33.792Z,1513244673.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:34.187Z,1513244674.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:34.220Z,1513244674.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:34.602Z,1513244674.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:34.617Z,1513244674.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:34.978Z,1513244674.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:35.011Z,1513244675.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:35.376Z,1513244675.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:35.402Z,1513244675.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:35.792Z,1513244675.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:35.807Z,1513244675.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:36.191Z,1513244676.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:36.206Z,1513244676.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:36.591Z,1513244676.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:36.606Z,1513244676.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:36.971Z,1513244676.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:37.011Z,1513244677.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:37.397Z,1513244677.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:37.440Z,1513244677.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:37.777Z,1513244677.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:37.808Z,1513244677.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:38.171Z,1513244678.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:38.210Z,1513244678.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:38.584Z,1513244678.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:38.613Z,1513244678.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:38.998Z,1513244678.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:39.014Z,1513244679.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:39.382Z,1513244679.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:39.419Z,1513244679.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:39.780Z,1513244679.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:39.811Z,1513244679.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:40.176Z,1513244680.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:40.212Z,1513244680.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:40.625Z,1513244680.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:40.682Z,1513244680.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:40.978Z,1513244680.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:41.010Z,1513244681.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:41.375Z,1513244681.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:41.410Z,1513244681.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:41.785Z,1513244681.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:41.815Z,1513244681.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:42.181Z,1513244682.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:42.216Z,1513244682.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:42.590Z,1513244682.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:42.616Z,1513244682.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:42.984Z,1513244682.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:43.018Z,1513244683.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:43.379Z,1513244683.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:43.394Z,1513244683.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:43.786Z,1513244683.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:43.824Z,1513244683.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:44.181Z,1513244684.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:44.222Z,1513244684.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:44.590Z,1513244684.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:44.622Z,1513244684.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:44.994Z,1513244684.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:45.019Z,1513244685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:45.386Z,1513244685.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:45.416Z,1513244685.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:45.780Z,1513244685.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:45.795Z,1513244685.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:46.178Z,1513244686.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:46.192Z,1513244686.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:46.582Z,1513244686.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:46.596Z,1513244686.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:46.998Z,1513244686.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:47.039Z,1513244687.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:47.379Z,1513244687.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:47.394Z,1513244687.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:47.782Z,1513244687.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:47.797Z,1513244687.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:48.193Z,1513244688.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:48.247Z,1513244688.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:48.586Z,1513244688.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:48.600Z,1513244688.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:48.982Z,1513244688.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:48.996Z,1513244688.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:49.382Z,1513244689.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:49.442Z,1513244689.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:49.782Z,1513244689.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:49.797Z,1513244689.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:50.195Z,1513244690.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:50.232Z,1513244690.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:50.589Z,1513244690.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:50.647Z,1513244690.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:50.986Z,1513244690.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:51.000Z,1513244691.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:51.387Z,1513244691.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:51.439Z,1513244691.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:51.783Z,1513244691.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:51.797Z,1513244691.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:52.172Z,1513244692.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:52.197Z,1513244692.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:52.579Z,1513244692.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:52.599Z,1513244692.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:52.981Z,1513244692.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:52.996Z,1513244692.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:53.391Z,1513244693.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:53.424Z,1513244693.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:53.803Z,1513244693.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:53.818Z,1513244693.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:54.201Z,1513244694.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:54.215Z,1513244694.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:54.591Z,1513244694.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:54.606Z,1513244694.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:54.971Z,1513244694.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:55.007Z,1513244695.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:55.371Z,1513244695.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:55.403Z,1513244695.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:55.776Z,1513244695.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:55.802Z,1513244695.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:56.178Z,1513244696.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:56.204Z,1513244696.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:56.602Z,1513244696.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:56.653Z,1513244696.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:56.995Z,1513244696.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:57.015Z,1513244697.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:57.381Z,1513244697.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:57.412Z,1513244697.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:57.771Z,1513244697.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:57.806Z,1513244697.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:58.168Z,1513244698.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:58.183Z,1513244698.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:58.576Z,1513244698.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:58.611Z,1513244698.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:58.972Z,1513244698.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:59.015Z,1513244699.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:59.368Z,1513244699.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:59.411Z,1513244699.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:44:59.785Z,1513244699.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:44:59.851Z,1513244699.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:00.193Z,1513244700.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:00.215Z,1513244700.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:00.582Z,1513244700.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:00.609Z,1513244700.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:00.980Z,1513244700.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:00.999Z,1513244700.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:01.381Z,1513244701.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:01.395Z,1513244701.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:01.776Z,1513244701.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:01.796Z,1513244701.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:02.176Z,1513244702.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:02.203Z,1513244702.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:02.585Z,1513244702.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:02.600Z,1513244702.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:02.986Z,1513244702.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:03.000Z,1513244703.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:03.394Z,1513244703.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:03.408Z,1513244703.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:03.786Z,1513244703.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:03.800Z,1513244703.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:04.183Z,1513244704.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:04.200Z,1513244704.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:04.577Z,1513244704.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:04.600Z,1513244704.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:04.979Z,1513244704.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:05.028Z,1513244705.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:05.384Z,1513244705.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:05.399Z,1513244705.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:05.792Z,1513244705.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:05.806Z,1513244705.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:06.210Z,1513244706.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:06.250Z,1513244706.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:06.590Z,1513244706.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:06.605Z,1513244706.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:06.971Z,1513244706.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:07.002Z,1513244707.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:07.371Z,1513244707.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:07.403Z,1513244707.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:07.786Z,1513244707.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:07.802Z,1513244707.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:08.172Z,1513244708.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:08.207Z,1513244708.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:08.595Z,1513244708.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:08.615Z,1513244708.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:08.996Z,1513244708.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:09.012Z,1513244709.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:09.399Z,1513244709.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:09.448Z,1513244709.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:09.771Z,1513244709.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:09.807Z,1513244709.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:10.184Z,1513244710.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:10.203Z,1513244710.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:10.572Z,1513244710.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:10.607Z,1513244710.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:10.972Z,1513244710.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:10.992Z,1513244710.992 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T09:45:10.992Z,1513244710.992 [BPC1] Data Fault, FailCount= 1
2017-12-14T09:45:10.992Z,1513244710.992 [BPC1](ERROR): Data Fault
2017-12-14T09:45:11.000Z,1513244711.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:11.013Z,1513244711.013 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:45:11.371Z,1513244711.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:11.408Z,1513244711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:11.793Z,1513244711.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:11.808Z,1513244711.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:12.195Z,1513244712.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:12.209Z,1513244712.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:12.222Z,1513244712.222 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:45:12.222Z,1513244712.222 [BPC1] No Fault, FailCount= 1
2017-12-14T09:45:12.612Z,1513244712.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:12.803Z,1513244712.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:12.976Z,1513244712.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:13.007Z,1513244713.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:13.371Z,1513244713.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:13.409Z,1513244713.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:13.776Z,1513244713.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:13.806Z,1513244713.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:14.171Z,1513244714.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:14.206Z,1513244714.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:14.596Z,1513244714.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:14.610Z,1513244714.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:14.998Z,1513244714.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:15.012Z,1513244715.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:15.382Z,1513244715.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:15.409Z,1513244715.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:15.771Z,1513244715.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:15.809Z,1513244715.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:16.171Z,1513244716.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:16.202Z,1513244716.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:16.572Z,1513244716.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:16.607Z,1513244716.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:16.976Z,1513244716.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:16.991Z,1513244716.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:17.367Z,1513244717.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:17.383Z,1513244717.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:17.787Z,1513244717.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:17.814Z,1513244717.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:18.186Z,1513244718.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:18.215Z,1513244718.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:18.582Z,1513244718.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:18.613Z,1513244718.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:18.988Z,1513244718.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:19.047Z,1513244719.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:19.382Z,1513244719.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:19.403Z,1513244719.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:19.779Z,1513244719.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:19.799Z,1513244719.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:20.183Z,1513244720.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:20.204Z,1513244720.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:20.590Z,1513244720.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:20.606Z,1513244720.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:20.990Z,1513244720.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:21.039Z,1513244721.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:21.390Z,1513244721.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:21.405Z,1513244721.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:21.785Z,1513244721.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:21.807Z,1513244721.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:22.191Z,1513244722.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:22.235Z,1513244722.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:22.574Z,1513244722.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:22.610Z,1513244722.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:22.984Z,1513244722.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:22.998Z,1513244722.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:23.371Z,1513244723.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:23.397Z,1513244723.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:23.666Z,1513244723.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:24.461Z,1513244724.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:26.913Z,1513244726.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:26.947Z,1513244726.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:27.058Z,1513244727.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:27.097Z,1513244727.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:27.415Z,1513244727.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:27.439Z,1513244727.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:27.807Z,1513244727.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:27.842Z,1513244727.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:28.202Z,1513244728.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:28.216Z,1513244728.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:28.607Z,1513244728.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:28.647Z,1513244728.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:29.006Z,1513244729.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:29.020Z,1513244729.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:29.406Z,1513244729.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:29.420Z,1513244729.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:29.808Z,1513244729.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:29.824Z,1513244729.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:30.209Z,1513244730.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:30.224Z,1513244730.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:30.610Z,1513244730.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:30.624Z,1513244730.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:31.006Z,1513244731.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:31.021Z,1513244731.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:31.403Z,1513244731.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:31.431Z,1513244731.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:31.823Z,1513244731.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:31.863Z,1513244731.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:32.209Z,1513244732.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:32.238Z,1513244732.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:32.619Z,1513244732.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:32.634Z,1513244732.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:33.018Z,1513244733.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:33.102Z,1513244733.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:33.419Z,1513244733.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:33.434Z,1513244733.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:33.796Z,1513244733.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:33.847Z,1513244733.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:34.192Z,1513244734.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:34.231Z,1513244734.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:34.595Z,1513244734.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:34.647Z,1513244734.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:35.036Z,1513244735.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:35.086Z,1513244735.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:35.395Z,1513244735.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:35.427Z,1513244735.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:35.824Z,1513244735.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:35.840Z,1513244735.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:36.220Z,1513244736.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:36.235Z,1513244736.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:36.614Z,1513244736.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:36.630Z,1513244736.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:36.995Z,1513244736.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:37.031Z,1513244737.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:37.395Z,1513244737.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:37.427Z,1513244737.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:37.800Z,1513244737.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:37.826Z,1513244737.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:38.234Z,1513244738.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:38.266Z,1513244738.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:38.617Z,1513244738.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:38.643Z,1513244738.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:39.030Z,1513244739.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:39.046Z,1513244739.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:39.416Z,1513244739.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:39.439Z,1513244739.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:39.807Z,1513244739.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:39.844Z,1513244739.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:40.195Z,1513244740.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:40.211Z,1513244740.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:40.607Z,1513244740.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:40.645Z,1513244740.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:41.006Z,1513244741.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:41.037Z,1513244741.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:41.410Z,1513244741.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:41.445Z,1513244741.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:41.813Z,1513244741.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:41.828Z,1513244741.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:42.210Z,1513244742.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:42.224Z,1513244742.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:42.608Z,1513244742.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:42.624Z,1513244742.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:43.002Z,1513244743.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:43.056Z,1513244743.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:43.405Z,1513244743.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:43.419Z,1513244743.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:43.809Z,1513244743.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:43.823Z,1513244743.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:44.209Z,1513244744.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:44.223Z,1513244744.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:44.622Z,1513244744.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:44.679Z,1513244744.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:45.009Z,1513244745.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:45.024Z,1513244745.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:45.409Z,1513244745.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:45.423Z,1513244745.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:45.802Z,1513244745.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:45.816Z,1513244745.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:46.202Z,1513244746.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:46.217Z,1513244746.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:46.603Z,1513244746.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:46.623Z,1513244746.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:46.996Z,1513244746.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:47.023Z,1513244747.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:47.395Z,1513244747.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:47.420Z,1513244747.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:47.819Z,1513244747.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:47.847Z,1513244747.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:48.209Z,1513244748.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:48.243Z,1513244748.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:48.606Z,1513244748.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:48.632Z,1513244748.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:48.996Z,1513244748.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:49.031Z,1513244749.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:49.395Z,1513244749.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:49.418Z,1513244749.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:49.796Z,1513244749.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:49.831Z,1513244749.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:50.199Z,1513244750.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:50.213Z,1513244750.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:50.613Z,1513244750.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:50.643Z,1513244750.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:51.035Z,1513244751.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:51.054Z,1513244751.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:51.417Z,1513244751.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:51.447Z,1513244751.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:51.807Z,1513244751.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:51.843Z,1513244751.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:52.203Z,1513244752.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:52.218Z,1513244752.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:52.602Z,1513244752.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:52.617Z,1513244752.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:53.006Z,1513244753.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:53.048Z,1513244753.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:53.401Z,1513244753.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:53.416Z,1513244753.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:53.814Z,1513244753.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:53.846Z,1513244753.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:54.216Z,1513244754.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:54.266Z,1513244754.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:54.622Z,1513244754.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:54.647Z,1513244754.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:55.006Z,1513244755.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:55.094Z,1513244755.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:55.405Z,1513244755.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:55.420Z,1513244755.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:55.806Z,1513244755.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:55.854Z,1513244755.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:56.209Z,1513244756.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:56.223Z,1513244756.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:56.619Z,1513244756.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:56.667Z,1513244756.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:57.018Z,1513244757.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:57.048Z,1513244757.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:57.434Z,1513244757.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:57.461Z,1513244757.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:57.807Z,1513244757.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:57.827Z,1513244757.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:58.198Z,1513244758.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:58.218Z,1513244758.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:58.604Z,1513244758.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:58.623Z,1513244758.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:59.007Z,1513244759.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:59.023Z,1513244759.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:59.407Z,1513244759.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:59.422Z,1513244759.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:45:59.810Z,1513244759.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:45:59.825Z,1513244759.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:00.214Z,1513244760.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:00.229Z,1513244760.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:00.634Z,1513244760.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:00.668Z,1513244760.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:01.002Z,1513244761.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:01.032Z,1513244761.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:01.408Z,1513244761.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:01.424Z,1513244761.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:01.799Z,1513244761.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:01.821Z,1513244761.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:02.203Z,1513244762.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:02.218Z,1513244762.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:02.619Z,1513244762.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:02.640Z,1513244762.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:03.019Z,1513244763.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:03.036Z,1513244763.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:03.419Z,1513244763.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:03.434Z,1513244763.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:03.795Z,1513244763.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:03.855Z,1513244763.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:04.195Z,1513244764.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:04.232Z,1513244764.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:04.602Z,1513244764.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:04.631Z,1513244764.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:05.004Z,1513244765.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:05.058Z,1513244765.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:05.399Z,1513244765.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:05.416Z,1513244765.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:05.809Z,1513244765.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:05.843Z,1513244765.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:06.218Z,1513244766.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:06.251Z,1513244766.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:06.614Z,1513244766.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:06.641Z,1513244766.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:07.027Z,1513244767.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:07.056Z,1513244767.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:07.406Z,1513244767.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:07.421Z,1513244767.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:07.806Z,1513244767.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:07.821Z,1513244767.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:08.201Z,1513244768.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:08.215Z,1513244768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:08.619Z,1513244768.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:08.649Z,1513244768.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:09.017Z,1513244769.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:09.049Z,1513244769.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:09.409Z,1513244769.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:09.423Z,1513244769.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:09.804Z,1513244769.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:09.819Z,1513244769.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:10.228Z,1513244770.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:10.262Z,1513244770.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:10.602Z,1513244770.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:10.619Z,1513244770.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:11.006Z,1513244771.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:11.022Z,1513244771.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:11.403Z,1513244771.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:11.418Z,1513244771.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:11.809Z,1513244771.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:11.824Z,1513244771.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:12.212Z,1513244772.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:12.227Z,1513244772.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:12.622Z,1513244772.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:12.636Z,1513244772.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:13.003Z,1513244773.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:13.027Z,1513244773.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:13.409Z,1513244773.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:13.425Z,1513244773.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:13.796Z,1513244773.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:13.822Z,1513244773.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:14.195Z,1513244774.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:14.227Z,1513244774.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:14.620Z,1513244774.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:14.635Z,1513244774.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:15.022Z,1513244775.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:15.037Z,1513244775.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:15.414Z,1513244775.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:15.431Z,1513244775.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:15.808Z,1513244775.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:15.822Z,1513244775.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:16.195Z,1513244776.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:16.223Z,1513244776.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:16.618Z,1513244776.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:16.725Z,1513244776.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:16.997Z,1513244776.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:17.059Z,1513244777.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:17.397Z,1513244777.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:17.440Z,1513244777.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:17.807Z,1513244777.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:17.875Z,1513244777.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:18.211Z,1513244778.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:18.246Z,1513244778.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:18.612Z,1513244778.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:18.690Z,1513244778.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:18.996Z,1513244778.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:19.038Z,1513244779.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:19.404Z,1513244779.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:19.468Z,1513244779.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:19.799Z,1513244779.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:19.879Z,1513244779.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:20.204Z,1513244780.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:20.246Z,1513244780.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:20.613Z,1513244780.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:20.632Z,1513244780.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:21.011Z,1513244781.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:21.057Z,1513244781.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:21.445Z,1513244781.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:21.471Z,1513244781.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:21.818Z,1513244781.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:21.874Z,1513244781.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:22.212Z,1513244782.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:22.264Z,1513244782.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:22.597Z,1513244782.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:22.635Z,1513244782.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:22.998Z,1513244782.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:23.044Z,1513244783.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:23.398Z,1513244783.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:23.440Z,1513244783.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:27.882Z,1513244787.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:27.928Z,1513244787.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:28.068Z,1513244788.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:28.084Z,1513244788.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:28.473Z,1513244788.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:28.500Z,1513244788.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:28.793Z,1513244788.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:28.854Z,1513244788.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:29.186Z,1513244789.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:29.205Z,1513244789.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:29.584Z,1513244789.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:29.620Z,1513244789.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:29.977Z,1513244789.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:30.035Z,1513244790.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:30.437Z,1513244790.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:30.476Z,1513244790.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:30.800Z,1513244790.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:30.840Z,1513244790.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:31.191Z,1513244791.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:31.237Z,1513244791.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:31.592Z,1513244791.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:31.635Z,1513244791.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:31.990Z,1513244791.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:32.017Z,1513244792.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:32.388Z,1513244792.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:32.501Z,1513244792.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:32.787Z,1513244792.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:32.827Z,1513244792.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:33.183Z,1513244793.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:33.239Z,1513244793.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:33.600Z,1513244793.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:33.672Z,1513244793.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:33.995Z,1513244793.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:34.075Z,1513244794.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:34.399Z,1513244794.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:34.435Z,1513244794.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:34.799Z,1513244794.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:34.903Z,1513244794.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:35.187Z,1513244795.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:35.206Z,1513244795.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:35.600Z,1513244795.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:35.643Z,1513244795.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:35.987Z,1513244795.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:36.038Z,1513244796.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:36.394Z,1513244796.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:36.446Z,1513244796.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:36.812Z,1513244796.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:36.860Z,1513244796.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:37.217Z,1513244797.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:37.288Z,1513244797.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:37.608Z,1513244797.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:37.649Z,1513244797.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:37.977Z,1513244797.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:38.011Z,1513244798.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:38.419Z,1513244798.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:38.479Z,1513244798.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:38.778Z,1513244798.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:38.821Z,1513244798.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:39.185Z,1513244799.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:39.193Z,1513244799.193 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T09:46:39.193Z,1513244799.193 [BPC1] Data Fault, FailCount= 1
2017-12-14T09:46:39.193Z,1513244799.193 [BPC1](ERROR): Data Fault
2017-12-14T09:46:39.244Z,1513244799.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:39.274Z,1513244799.274 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T09:46:39.638Z,1513244799.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:39.710Z,1513244799.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:39.993Z,1513244799.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:40.012Z,1513244800.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:40.425Z,1513244800.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:40.493Z,1513244800.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:40.543Z,1513244800.543 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:46:40.543Z,1513244800.543 [BPC1] No Fault, FailCount= 1
2017-12-14T09:46:40.777Z,1513244800.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:40.914Z,1513244800.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:41.181Z,1513244801.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:41.226Z,1513244801.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:41.581Z,1513244801.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:41.630Z,1513244801.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:41.980Z,1513244801.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:42.023Z,1513244802.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:42.432Z,1513244802.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:42.472Z,1513244802.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:42.792Z,1513244802.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:42.811Z,1513244802.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:43.201Z,1513244803.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:43.223Z,1513244803.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:43.595Z,1513244803.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:43.624Z,1513244803.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:43.975Z,1513244803.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:44.011Z,1513244804.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:44.436Z,1513244804.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:44.508Z,1513244804.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:44.806Z,1513244804.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:44.838Z,1513244804.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:45.185Z,1513244805.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:45.200Z,1513244805.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:45.598Z,1513244805.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:45.629Z,1513244805.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:45.986Z,1513244805.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:46.000Z,1513244806.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:46.406Z,1513244806.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:46.497Z,1513244806.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:46.782Z,1513244806.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:46.796Z,1513244806.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:47.181Z,1513244807.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:47.206Z,1513244807.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:47.588Z,1513244807.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:47.603Z,1513244807.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:47.985Z,1513244807.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:47.000Z,1513244808.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:48.375Z,1513244808.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:48.402Z,1513244808.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:48.816Z,1513244808.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:48.856Z,1513244808.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:49.202Z,1513244809.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:49.295Z,1513244809.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:49.596Z,1513244809.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:49.610Z,1513244809.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:49.994Z,1513244809.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:50.009Z,1513244810.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:50.375Z,1513244810.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:50.412Z,1513244810.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:50.814Z,1513244810.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:50.863Z,1513244810.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:51.183Z,1513244811.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:51.215Z,1513244811.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:51.604Z,1513244811.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:51.619Z,1513244811.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:51.994Z,1513244811.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:52.027Z,1513244812.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:52.467Z,1513244812.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:52.518Z,1513244812.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:52.786Z,1513244812.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:52.800Z,1513244812.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:53.179Z,1513244813.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:53.211Z,1513244813.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:53.588Z,1513244813.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:53.603Z,1513244813.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:53.989Z,1513244813.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:54.003Z,1513244814.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:54.416Z,1513244814.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:54.473Z,1513244814.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:54.801Z,1513244814.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:54.819Z,1513244814.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:55.200Z,1513244815.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:55.215Z,1513244815.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:55.602Z,1513244815.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:55.623Z,1513244815.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:55.992Z,1513244815.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:56.027Z,1513244816.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:56.414Z,1513244816.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:56.494Z,1513244816.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:56.782Z,1513244816.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:56.802Z,1513244816.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:57.192Z,1513244817.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:57.216Z,1513244817.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:57.599Z,1513244817.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:57.619Z,1513244817.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:57.998Z,1513244817.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:58.014Z,1513244818.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:58.425Z,1513244818.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:58.480Z,1513244818.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:58.818Z,1513244818.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:58.858Z,1513244818.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:59.187Z,1513244819.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:59.229Z,1513244819.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:59.586Z,1513244819.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:46:59.601Z,1513244819.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:46:59.982Z,1513244819.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:00.033Z,1513244820.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:00.386Z,1513244820.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:00.402Z,1513244820.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:00.794Z,1513244820.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:00.832Z,1513244820.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:01.198Z,1513244821.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:01.281Z,1513244821.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:01.586Z,1513244821.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:01.619Z,1513244821.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:01.998Z,1513244821.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:02.060Z,1513244822.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:02.382Z,1513244822.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:02.410Z,1513244822.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:02.809Z,1513244822.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:02.867Z,1513244822.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:03.179Z,1513244823.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:03.214Z,1513244823.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:03.629Z,1513244823.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:03.663Z,1513244823.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:03.986Z,1513244823.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:04.015Z,1513244824.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:04.385Z,1513244824.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:04.421Z,1513244824.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:04.814Z,1513244824.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:04.859Z,1513244824.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:05.187Z,1513244825.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:05.227Z,1513244825.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:05.596Z,1513244825.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:05.619Z,1513244825.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:05.975Z,1513244825.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:06.002Z,1513244826.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:06.397Z,1513244826.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:06.472Z,1513244826.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:06.789Z,1513244826.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:06.833Z,1513244826.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:07.193Z,1513244827.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:07.223Z,1513244827.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:07.583Z,1513244827.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:07.615Z,1513244827.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:07.976Z,1513244827.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:07.991Z,1513244827.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:08.442Z,1513244828.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:08.502Z,1513244828.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:08.782Z,1513244828.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:08.818Z,1513244828.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:09.189Z,1513244829.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:09.205Z,1513244829.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:09.589Z,1513244829.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:09.605Z,1513244829.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:09.990Z,1513244829.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:10.083Z,1513244830.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:10.439Z,1513244830.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:10.467Z,1513244830.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:10.791Z,1513244830.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:10.806Z,1513244830.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:11.185Z,1513244831.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:11.240Z,1513244831.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:11.581Z,1513244831.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:11.607Z,1513244831.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:11.978Z,1513244831.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:12.021Z,1513244832.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:12.419Z,1513244832.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:12.458Z,1513244832.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:12.810Z,1513244832.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:12.840Z,1513244832.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:13.194Z,1513244833.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:13.227Z,1513244833.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:13.583Z,1513244833.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:13.597Z,1513244833.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:13.987Z,1513244833.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:14.025Z,1513244834.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:14.381Z,1513244834.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:14.395Z,1513244834.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:14.814Z,1513244834.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:14.838Z,1513244834.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:15.175Z,1513244835.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:15.208Z,1513244835.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:15.604Z,1513244835.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:15.619Z,1513244835.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:16.005Z,1513244836.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:16.020Z,1513244836.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:16.386Z,1513244836.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:16.419Z,1513244836.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:16.814Z,1513244836.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:16.851Z,1513244836.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:17.183Z,1513244837.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:17.216Z,1513244837.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:17.582Z,1513244837.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:17.596Z,1513244837.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:17.984Z,1513244837.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:18.055Z,1513244838.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:18.382Z,1513244838.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:18.396Z,1513244838.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:18.875Z,1513244838.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:18.892Z,1513244838.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:19.188Z,1513244839.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:19.203Z,1513244839.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:19.591Z,1513244839.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:19.606Z,1513244839.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:19.987Z,1513244839.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:20.002Z,1513244840.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:20.425Z,1513244840.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:20.476Z,1513244840.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:20.781Z,1513244840.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:20.816Z,1513244840.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:21.221Z,1513244841.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:21.260Z,1513244841.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:21.599Z,1513244841.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:21.615Z,1513244841.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:22.004Z,1513244842.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:22.019Z,1513244842.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:22.427Z,1513244842.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:22.492Z,1513244842.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:22.776Z,1513244842.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:22.809Z,1513244842.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:22.812Z,1513244842.812 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:47:22.817Z,1513244842.817 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:47:22.817Z,1513244842.817 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:47:22.817Z,1513244842.817 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:47:23.176Z,1513244843.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:23.258Z,1513244843.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:23.266Z,1513244843.266 [Default:CheckIn:D] Stopped
2017-12-14T09:47:23.266Z,1513244843.266 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:47:23.583Z,1513244843.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:23.599Z,1513244843.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 554.131250 min 
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn:E] Stopped
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn] Stopped
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:47:23.627Z,1513244843.627 [Default:CheckIn](INFO): Running loop #54
2017-12-14T09:47:23.628Z,1513244843.628 [Default:CheckIn] Running Loop=54
2017-12-14T09:47:23.628Z,1513244843.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:47:23.628Z,1513244843.628 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:47:27.252Z,1513244847.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:27.299Z,1513244847.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:27.396Z,1513244847.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:27.435Z,1513244847.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:27.778Z,1513244847.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:27.827Z,1513244847.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:28.182Z,1513244848.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:28.203Z,1513244848.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:28.580Z,1513244848.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:28.596Z,1513244848.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:28.966Z,1513244848.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:28.988Z,1513244848.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:29.377Z,1513244849.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:29.391Z,1513244849.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:29.777Z,1513244849.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:29.792Z,1513244849.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:30.178Z,1513244850.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:30.197Z,1513244850.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:30.586Z,1513244850.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:30.600Z,1513244850.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:31.036Z,1513244851.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:31.068Z,1513244851.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:31.068Z,1513244851.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185
2017-12-14T09:47:31.068Z,1513244851.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:47:31.095Z,1513244851.095 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:31.095Z,1513244851.095 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 185
2017-12-14T09:47:31.095Z,1513244851.095 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:47:31.106Z,1513244851.106 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:31.106Z,1513244851.106 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185
2017-12-14T09:47:31.106Z,1513244851.106 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:47:31.134Z,1513244851.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:47:31.135Z,1513244851.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:47:31.135Z,1513244851.135 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:47:31.381Z,1513244851.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:31.418Z,1513244851.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:47:31.418Z,1513244851.418 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185
2017-12-14T09:47:31.419Z,1513244851.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:47:31.419Z,1513244851.419 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 185
2017-12-14T09:47:31.419Z,1513244851.419 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:47:31.419Z,1513244851.419 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185
2017-12-14T09:47:31.768Z,1513244851.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:31.796Z,1513244851.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:47:31.796Z,1513244851.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:47:31.797Z,1513244851.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:47:31.797Z,1513244851.797 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:47:31.797Z,1513244851.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:47:31.798Z,1513244851.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:47:31.798Z,1513244851.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:47:31.798Z,1513244851.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:47:31.799Z,1513244851.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:47:32.169Z,1513244852.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:32.183Z,1513244852.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:32.569Z,1513244852.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:32.594Z,1513244852.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:32.973Z,1513244852.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:32.989Z,1513244852.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:33.363Z,1513244853.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:33.381Z,1513244853.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:33.777Z,1513244853.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:33.792Z,1513244853.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:34.185Z,1513244854.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:34.217Z,1513244854.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:34.574Z,1513244854.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:34.595Z,1513244854.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:34.970Z,1513244854.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:34.986Z,1513244854.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:35.371Z,1513244855.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:35.385Z,1513244855.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:35.774Z,1513244855.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:35.789Z,1513244855.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:36.172Z,1513244856.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:36.223Z,1513244856.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:36.577Z,1513244856.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:36.592Z,1513244856.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:36.977Z,1513244856.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:37.010Z,1513244857.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:37.389Z,1513244857.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:37.404Z,1513244857.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:37.768Z,1513244857.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:37.787Z,1513244857.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:38.165Z,1513244858.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:38.180Z,1513244858.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:38.569Z,1513244858.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:38.584Z,1513244858.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:38.970Z,1513244858.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:39.011Z,1513244859.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:39.364Z,1513244859.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:39.380Z,1513244859.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:39.782Z,1513244859.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:39.807Z,1513244859.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:40.181Z,1513244860.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:40.216Z,1513244860.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:40.592Z,1513244860.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:40.625Z,1513244860.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:40.975Z,1513244860.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:40.990Z,1513244860.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:41.373Z,1513244861.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:41.387Z,1513244861.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:41.768Z,1513244861.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:41.784Z,1513244861.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:42.172Z,1513244862.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:42.188Z,1513244862.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:42.581Z,1513244862.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:42.596Z,1513244862.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:42.981Z,1513244862.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:42.996Z,1513244862.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:43.386Z,1513244863.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:43.400Z,1513244863.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:43.811Z,1513244863.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:43.850Z,1513244863.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:44.171Z,1513244864.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:44.191Z,1513244864.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:44.566Z,1513244864.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:44.599Z,1513244864.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:44.971Z,1513244864.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:44.994Z,1513244864.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:45.371Z,1513244865.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:45.391Z,1513244865.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:45.785Z,1513244865.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:45.807Z,1513244865.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:46.186Z,1513244866.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:46.200Z,1513244866.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:46.581Z,1513244866.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:46.596Z,1513244866.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:46.988Z,1513244866.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:47.011Z,1513244867.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:47.385Z,1513244867.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:47.400Z,1513244867.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:47.773Z,1513244867.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:47.792Z,1513244867.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:48.164Z,1513244868.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:48.254Z,1513244868.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:48.587Z,1513244868.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:48.602Z,1513244868.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:48.990Z,1513244868.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:49.006Z,1513244869.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:49.386Z,1513244869.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:49.446Z,1513244869.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:49.763Z,1513244869.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:49.791Z,1513244869.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:50.192Z,1513244870.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:50.243Z,1513244870.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:50.565Z,1513244870.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:50.595Z,1513244870.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:50.965Z,1513244870.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:51.006Z,1513244871.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:51.362Z,1513244871.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:51.376Z,1513244871.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:51.779Z,1513244871.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:51.805Z,1513244871.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:52.182Z,1513244872.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:52.219Z,1513244872.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:52.576Z,1513244872.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:52.599Z,1513244872.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:52.972Z,1513244872.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:53.011Z,1513244873.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:53.394Z,1513244873.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:53.429Z,1513244873.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:53.772Z,1513244873.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:53.788Z,1513244873.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:54.173Z,1513244874.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:54.188Z,1513244874.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:54.573Z,1513244874.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:54.588Z,1513244874.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:54.978Z,1513244874.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:54.994Z,1513244874.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:55.385Z,1513244875.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:55.423Z,1513244875.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:55.772Z,1513244875.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:55.787Z,1513244875.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:56.163Z,1513244876.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:56.195Z,1513244876.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:56.599Z,1513244876.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:56.622Z,1513244876.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:56.975Z,1513244876.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:56.995Z,1513244876.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:57.361Z,1513244877.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:57.385Z,1513244877.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:57.780Z,1513244877.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:57.796Z,1513244877.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:58.181Z,1513244878.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:58.195Z,1513244878.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:58.578Z,1513244878.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:58.631Z,1513244878.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:58.991Z,1513244878.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:59.006Z,1513244879.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:59.364Z,1513244879.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:59.393Z,1513244879.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:47:59.796Z,1513244879.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:47:59.836Z,1513244879.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:00.162Z,1513244880.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:00.199Z,1513244880.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:00.591Z,1513244880.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:00.607Z,1513244880.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:00.985Z,1513244880.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:01.004Z,1513244881.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:01.373Z,1513244881.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:01.400Z,1513244881.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:01.771Z,1513244881.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:01.799Z,1513244881.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:02.157Z,1513244882.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:02.173Z,1513244882.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:02.562Z,1513244882.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:02.608Z,1513244882.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:02.970Z,1513244882.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:03.021Z,1513244883.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:03.372Z,1513244883.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:03.391Z,1513244883.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:03.789Z,1513244883.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:03.804Z,1513244883.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:04.182Z,1513244884.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:04.196Z,1513244884.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:04.580Z,1513244884.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:04.596Z,1513244884.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:04.967Z,1513244884.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:04.988Z,1513244884.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:05.373Z,1513244885.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:05.387Z,1513244885.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:05.773Z,1513244885.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:05.788Z,1513244885.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:06.195Z,1513244886.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:06.232Z,1513244886.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:06.587Z,1513244886.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:06.602Z,1513244886.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:06.982Z,1513244886.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:07.011Z,1513244887.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:07.385Z,1513244887.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:07.408Z,1513244887.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:07.776Z,1513244887.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:07.795Z,1513244887.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:08.163Z,1513244888.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:08.190Z,1513244888.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:08.576Z,1513244888.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:08.595Z,1513244888.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:08.976Z,1513244888.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:08.991Z,1513244888.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:09.382Z,1513244889.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:09.431Z,1513244889.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:09.792Z,1513244889.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:09.808Z,1513244889.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:10.190Z,1513244890.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:10.205Z,1513244890.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:10.582Z,1513244890.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:10.659Z,1513244890.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:10.984Z,1513244890.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:10.999Z,1513244890.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:11.363Z,1513244891.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:11.395Z,1513244891.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:11.768Z,1513244891.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:11.815Z,1513244891.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:12.165Z,1513244892.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:12.203Z,1513244892.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:12.630Z,1513244892.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:12.703Z,1513244892.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:12.985Z,1513244892.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:13.008Z,1513244893.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:13.385Z,1513244893.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:13.413Z,1513244893.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:13.769Z,1513244893.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:13.783Z,1513244893.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:14.167Z,1513244894.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:14.183Z,1513244894.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:14.570Z,1513244894.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:14.584Z,1513244894.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:14.974Z,1513244894.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:14.989Z,1513244894.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:15.370Z,1513244895.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:15.385Z,1513244895.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:15.785Z,1513244895.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:15.819Z,1513244895.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:16.177Z,1513244896.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:16.216Z,1513244896.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:16.574Z,1513244896.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:16.588Z,1513244896.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:16.973Z,1513244896.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:16.987Z,1513244896.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:17.372Z,1513244897.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:17.387Z,1513244897.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:17.773Z,1513244897.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:17.788Z,1513244897.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:18.171Z,1513244898.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:18.187Z,1513244898.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:18.578Z,1513244898.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:18.592Z,1513244898.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:18.993Z,1513244898.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:19.028Z,1513244899.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:19.393Z,1513244899.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:19.417Z,1513244899.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:19.775Z,1513244899.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:19.791Z,1513244899.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:20.163Z,1513244900.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:20.194Z,1513244900.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:20.571Z,1513244900.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:20.591Z,1513244900.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:20.975Z,1513244900.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:21.026Z,1513244901.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:21.376Z,1513244901.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:21.391Z,1513244901.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:21.776Z,1513244901.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:21.791Z,1513244901.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:22.185Z,1513244902.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:22.230Z,1513244902.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:22.593Z,1513244902.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:22.618Z,1513244902.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:22.972Z,1513244902.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:22.987Z,1513244902.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:23.377Z,1513244903.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:23.392Z,1513244903.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:23.778Z,1513244903.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:23.793Z,1513244903.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:27.277Z,1513244907.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:27.292Z,1513244907.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:27.410Z,1513244907.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:27.443Z,1513244907.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:27.797Z,1513244907.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:27.824Z,1513244907.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:28.206Z,1513244908.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:28.226Z,1513244908.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:28.587Z,1513244908.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:28.651Z,1513244908.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:28.996Z,1513244908.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:29.027Z,1513244909.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:29.380Z,1513244909.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:29.400Z,1513244909.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:29.794Z,1513244909.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:29.829Z,1513244909.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:30.198Z,1513244910.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:30.228Z,1513244910.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:30.602Z,1513244910.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:30.631Z,1513244910.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:30.981Z,1513244910.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:31.000Z,1513244911.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:31.384Z,1513244911.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:31.399Z,1513244911.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:31.793Z,1513244911.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:31.825Z,1513244911.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:32.186Z,1513244912.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:32.203Z,1513244912.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:32.607Z,1513244912.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:32.659Z,1513244912.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:32.991Z,1513244912.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:33.011Z,1513244913.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:33.390Z,1513244913.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:33.460Z,1513244913.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:33.787Z,1513244913.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:33.803Z,1513244913.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:34.186Z,1513244914.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:34.203Z,1513244914.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:34.583Z,1513244914.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:34.600Z,1513244914.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:34.994Z,1513244914.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:35.059Z,1513244915.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:35.384Z,1513244915.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:35.404Z,1513244915.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:35.793Z,1513244915.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:35.847Z,1513244915.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:36.193Z,1513244916.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:36.207Z,1513244916.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:36.592Z,1513244916.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:36.608Z,1513244916.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:36.979Z,1513244916.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:37.006Z,1513244917.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:37.388Z,1513244917.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:37.403Z,1513244917.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:37.790Z,1513244917.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:37.804Z,1513244917.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:38.225Z,1513244918.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:38.252Z,1513244918.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:38.602Z,1513244918.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:38.623Z,1513244918.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:39.002Z,1513244919.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:39.016Z,1513244919.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:39.393Z,1513244919.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:39.408Z,1513244919.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:39.775Z,1513244919.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:39.799Z,1513244919.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:40.173Z,1513244920.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:40.200Z,1513244920.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:40.589Z,1513244920.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:40.604Z,1513244920.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:40.996Z,1513244920.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:41.011Z,1513244921.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:41.406Z,1513244921.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:41.441Z,1513244921.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:41.794Z,1513244921.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:41.810Z,1513244921.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:42.201Z,1513244922.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:42.215Z,1513244922.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:42.592Z,1513244922.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:42.618Z,1513244922.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:42.996Z,1513244922.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:43.015Z,1513244923.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:43.387Z,1513244923.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:43.407Z,1513244923.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:43.775Z,1513244923.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:43.801Z,1513244923.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:44.176Z,1513244924.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:44.233Z,1513244924.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:44.649Z,1513244924.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:44.700Z,1513244924.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:45.000Z,1513244925.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:45.023Z,1513244925.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:45.386Z,1513244925.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:45.409Z,1513244925.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:45.775Z,1513244925.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:45.802Z,1513244925.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:46.175Z,1513244926.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:46.218Z,1513244926.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:46.576Z,1513244926.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:46.615Z,1513244926.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:46.976Z,1513244926.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:47.003Z,1513244927.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:47.375Z,1513244927.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:47.428Z,1513244927.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:47.802Z,1513244927.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:47.845Z,1513244927.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:48.189Z,1513244928.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:48.219Z,1513244928.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:48.582Z,1513244928.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:48.615Z,1513244928.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:48.976Z,1513244928.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:49.015Z,1513244929.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:49.379Z,1513244929.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:49.396Z,1513244929.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:49.783Z,1513244929.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:49.798Z,1513244929.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:50.183Z,1513244930.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:50.219Z,1513244930.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:50.597Z,1513244930.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:50.623Z,1513244930.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:51.003Z,1513244931.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:51.071Z,1513244931.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:51.398Z,1513244931.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:51.427Z,1513244931.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:51.779Z,1513244931.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:51.795Z,1513244931.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:52.180Z,1513244932.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:52.196Z,1513244932.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:52.591Z,1513244932.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:52.627Z,1513244932.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:52.989Z,1513244932.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:53.004Z,1513244933.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:53.382Z,1513244933.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:53.398Z,1513244933.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:53.802Z,1513244933.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:53.824Z,1513244933.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:54.227Z,1513244934.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:54.251Z,1513244934.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:54.589Z,1513244934.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:54.625Z,1513244934.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:54.991Z,1513244934.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:55.007Z,1513244935.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:55.387Z,1513244935.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:55.402Z,1513244935.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:55.788Z,1513244935.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:55.803Z,1513244935.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:56.183Z,1513244936.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:56.247Z,1513244936.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:56.590Z,1513244936.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:56.617Z,1513244936.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:56.994Z,1513244936.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:57.043Z,1513244937.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:57.412Z,1513244937.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:57.439Z,1513244937.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:57.795Z,1513244937.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:57.847Z,1513244937.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:58.188Z,1513244938.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:58.203Z,1513244938.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:58.581Z,1513244938.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:58.599Z,1513244938.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:58.979Z,1513244938.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:59.006Z,1513244939.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:59.389Z,1513244939.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:59.404Z,1513244939.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:48:59.799Z,1513244939.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:48:59.819Z,1513244939.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:00.202Z,1513244940.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:00.216Z,1513244940.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:00.599Z,1513244940.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:00.654Z,1513244940.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:00.995Z,1513244940.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:01.010Z,1513244941.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:01.375Z,1513244941.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:01.401Z,1513244941.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:01.776Z,1513244941.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:01.809Z,1513244941.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:02.192Z,1513244942.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:02.211Z,1513244942.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:02.606Z,1513244942.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:02.627Z,1513244942.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:03.004Z,1513244943.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:03.018Z,1513244943.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:03.398Z,1513244943.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:03.414Z,1513244943.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:03.801Z,1513244943.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:03.820Z,1513244943.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:04.175Z,1513244944.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:04.213Z,1513244944.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:04.580Z,1513244944.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:04.615Z,1513244944.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:04.985Z,1513244944.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:05.020Z,1513244945.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:05.376Z,1513244945.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:05.390Z,1513244945.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:05.789Z,1513244945.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:05.825Z,1513244945.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:06.193Z,1513244946.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:06.242Z,1513244946.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:06.593Z,1513244946.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:06.625Z,1513244946.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:07.025Z,1513244947.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:07.052Z,1513244947.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:07.392Z,1513244947.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:07.427Z,1513244947.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:07.786Z,1513244947.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:07.801Z,1513244947.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:08.184Z,1513244948.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:08.199Z,1513244948.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:08.597Z,1513244948.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:08.612Z,1513244948.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:08.991Z,1513244948.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:09.011Z,1513244949.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:09.390Z,1513244949.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:09.409Z,1513244949.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:09.786Z,1513244949.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:09.807Z,1513244949.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:10.223Z,1513244950.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:10.288Z,1513244950.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:10.583Z,1513244950.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:10.599Z,1513244950.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:10.983Z,1513244950.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:10.999Z,1513244950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:11.385Z,1513244951.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:11.400Z,1513244951.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:11.790Z,1513244951.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:11.806Z,1513244951.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:12.191Z,1513244952.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:12.212Z,1513244952.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:12.254Z,1513244952.254 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:49:12.593Z,1513244952.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:12.608Z,1513244952.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:12.984Z,1513244952.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:12.999Z,1513244952.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:13.399Z,1513244953.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:13.432Z,1513244953.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:13.786Z,1513244953.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:13.807Z,1513244953.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:14.183Z,1513244954.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:14.203Z,1513244954.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:14.595Z,1513244954.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:14.610Z,1513244954.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:14.996Z,1513244954.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:15.016Z,1513244955.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:15.393Z,1513244955.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:15.408Z,1513244955.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:15.788Z,1513244955.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:15.807Z,1513244955.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:16.193Z,1513244956.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:16.215Z,1513244956.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:16.588Z,1513244956.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:16.623Z,1513244956.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:16.976Z,1513244956.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:17.012Z,1513244957.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:17.375Z,1513244957.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:17.410Z,1513244957.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:17.786Z,1513244957.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:17.858Z,1513244957.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:18.189Z,1513244958.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:18.263Z,1513244958.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:18.593Z,1513244958.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:18.627Z,1513244958.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:18.983Z,1513244958.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:19.039Z,1513244959.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:19.379Z,1513244959.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:19.394Z,1513244959.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:19.819Z,1513244959.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:19.879Z,1513244959.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:20.188Z,1513244960.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:20.202Z,1513244960.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:20.597Z,1513244960.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:20.628Z,1513244960.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:20.993Z,1513244960.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:21.007Z,1513244961.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:21.387Z,1513244961.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:21.401Z,1513244961.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:21.784Z,1513244961.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:21.804Z,1513244961.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:22.183Z,1513244962.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:22.204Z,1513244962.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:22.575Z,1513244962.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:22.607Z,1513244962.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:22.982Z,1513244962.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:23.038Z,1513244963.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:23.390Z,1513244963.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:23.411Z,1513244963.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:23.798Z,1513244963.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:23.819Z,1513244963.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:27.301Z,1513244967.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:27.316Z,1513244967.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:27.438Z,1513244967.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:27.471Z,1513244967.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:27.800Z,1513244967.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:27.815Z,1513244967.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:28.205Z,1513244968.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:28.248Z,1513244968.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:28.599Z,1513244968.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:28.619Z,1513244968.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:28.998Z,1513244968.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:29.022Z,1513244969.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:29.410Z,1513244969.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:29.468Z,1513244969.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:29.814Z,1513244969.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:29.829Z,1513244969.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:30.213Z,1513244970.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:30.228Z,1513244970.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:30.614Z,1513244970.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:30.629Z,1513244970.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:30.991Z,1513244970.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:31.018Z,1513244971.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:31.399Z,1513244971.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:31.420Z,1513244971.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:31.800Z,1513244971.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:31.840Z,1513244971.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:32.188Z,1513244972.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:32.267Z,1513244972.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:32.658Z,1513244972.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:32.683Z,1513244972.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:33.005Z,1513244973.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:33.019Z,1513244973.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:33.407Z,1513244973.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:33.438Z,1513244973.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:33.796Z,1513244973.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:33.835Z,1513244973.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:34.199Z,1513244974.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:34.233Z,1513244974.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:34.597Z,1513244974.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:34.612Z,1513244974.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:34.000Z,1513244975.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:35.015Z,1513244975.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:35.400Z,1513244975.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:35.419Z,1513244975.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:35.811Z,1513244975.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:35.842Z,1513244975.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:36.234Z,1513244976.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:36.262Z,1513244976.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:36.613Z,1513244976.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:36.639Z,1513244976.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:37.002Z,1513244977.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:37.017Z,1513244977.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:37.402Z,1513244977.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:37.416Z,1513244977.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:37.802Z,1513244977.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:37.816Z,1513244977.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:38.196Z,1513244978.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:38.212Z,1513244978.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:38.613Z,1513244978.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:38.645Z,1513244978.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:39.013Z,1513244979.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:39.052Z,1513244979.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:39.421Z,1513244979.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:39.448Z,1513244979.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:39.802Z,1513244979.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:39.817Z,1513244979.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:40.203Z,1513244980.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:40.292Z,1513244980.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:40.589Z,1513244980.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:40.620Z,1513244980.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:40.996Z,1513244980.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:41.064Z,1513244981.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:41.391Z,1513244981.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:41.427Z,1513244981.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:41.815Z,1513244981.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:41.874Z,1513244981.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:42.223Z,1513244982.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:42.238Z,1513244982.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:42.649Z,1513244982.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:42.691Z,1513244982.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:42.996Z,1513244982.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:43.024Z,1513244983.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:43.398Z,1513244983.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:43.412Z,1513244983.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:43.801Z,1513244983.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:43.815Z,1513244983.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:44.192Z,1513244984.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:44.215Z,1513244984.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:44.606Z,1513244984.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:44.627Z,1513244984.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:45.006Z,1513244985.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:45.027Z,1513244985.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:45.402Z,1513244985.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:45.422Z,1513244985.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:45.818Z,1513244985.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:45.854Z,1513244985.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:46.191Z,1513244986.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:46.227Z,1513244986.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:46.591Z,1513244986.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:46.619Z,1513244986.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:47.011Z,1513244987.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:47.026Z,1513244987.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:47.392Z,1513244987.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:47.420Z,1513244987.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:47.814Z,1513244987.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:47.836Z,1513244987.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:48.216Z,1513244988.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:48.231Z,1513244988.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:48.617Z,1513244988.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:48.632Z,1513244988.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:49.022Z,1513244989.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:49.061Z,1513244989.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:49.420Z,1513244989.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:49.434Z,1513244989.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:49.792Z,1513244989.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:49.819Z,1513244989.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:50.188Z,1513244990.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:50.238Z,1513244990.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:50.613Z,1513244990.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:50.630Z,1513244990.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:51.015Z,1513244991.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:51.039Z,1513244991.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:51.415Z,1513244991.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:51.431Z,1513244991.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:51.792Z,1513244991.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:51.823Z,1513244991.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:52.255Z,1513244992.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:52.338Z,1513244992.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:52.596Z,1513244992.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:52.611Z,1513244992.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:53.002Z,1513244993.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:53.017Z,1513244993.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:53.400Z,1513244993.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:53.415Z,1513244993.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:53.811Z,1513244993.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:53.844Z,1513244993.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:54.205Z,1513244994.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:54.244Z,1513244994.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:54.605Z,1513244994.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:54.645Z,1513244994.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:54.994Z,1513244994.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:55.023Z,1513244995.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:55.432Z,1513244995.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:55.446Z,1513244995.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:55.806Z,1513244995.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:55.820Z,1513244995.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:56.196Z,1513244996.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:56.212Z,1513244996.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:56.604Z,1513244996.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:56.624Z,1513244996.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:57.009Z,1513244997.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:57.024Z,1513244997.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:57.406Z,1513244997.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:57.421Z,1513244997.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:57.798Z,1513244997.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:57.820Z,1513244997.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:58.202Z,1513244998.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:58.216Z,1513244998.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:58.613Z,1513244998.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:58.652Z,1513244998.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:58.992Z,1513244998.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:59.017Z,1513244999.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:59.391Z,1513244999.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:59.423Z,1513244999.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:49:59.815Z,1513244999.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:49:59.830Z,1513244999.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:00.225Z,1513245000.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:00.247Z,1513245000.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:00.612Z,1513245000.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:00.627Z,1513245000.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:00.991Z,1513245000.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:01.027Z,1513245001.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:01.395Z,1513245001.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:01.428Z,1513245001.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:01.814Z,1513245001.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:01.913Z,1513245001.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:02.200Z,1513245002.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:02.216Z,1513245002.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:02.613Z,1513245002.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:02.660Z,1513245002.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:03.009Z,1513245003.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:03.043Z,1513245003.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:03.411Z,1513245003.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:03.442Z,1513245003.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:03.795Z,1513245003.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:03.843Z,1513245003.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:04.201Z,1513245004.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:04.215Z,1513245004.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:04.591Z,1513245004.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:04.643Z,1513245004.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:05.034Z,1513245005.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:05.058Z,1513245005.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:05.398Z,1513245005.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:05.419Z,1513245005.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:05.813Z,1513245005.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:05.844Z,1513245005.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:06.205Z,1513245006.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:06.219Z,1513245006.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:06.612Z,1513245006.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:06.646Z,1513245006.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:07.001Z,1513245007.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:07.016Z,1513245007.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:07.400Z,1513245007.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:07.415Z,1513245007.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:07.800Z,1513245007.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:07.815Z,1513245007.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:08.191Z,1513245008.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:08.235Z,1513245008.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:08.608Z,1513245008.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:08.627Z,1513245008.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:09.010Z,1513245009.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:09.024Z,1513245009.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:09.410Z,1513245009.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:09.424Z,1513245009.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:09.805Z,1513245009.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:09.819Z,1513245009.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:10.199Z,1513245010.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:10.220Z,1513245010.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:10.599Z,1513245010.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:10.619Z,1513245010.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:11.001Z,1513245011.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:11.015Z,1513245011.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:11.408Z,1513245011.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:11.471Z,1513245011.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:11.812Z,1513245011.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:11.827Z,1513245011.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:12.214Z,1513245012.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:12.228Z,1513245012.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:12.614Z,1513245012.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:12.635Z,1513245012.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:12.992Z,1513245012.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:13.074Z,1513245013.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:13.400Z,1513245013.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:13.414Z,1513245013.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:13.802Z,1513245013.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:13.817Z,1513245013.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:14.205Z,1513245014.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:14.220Z,1513245014.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:14.633Z,1513245014.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:14.683Z,1513245014.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:15.013Z,1513245015.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:15.041Z,1513245015.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:15.414Z,1513245015.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:15.437Z,1513245015.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:15.802Z,1513245015.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:15.817Z,1513245015.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:16.201Z,1513245016.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:16.216Z,1513245016.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:16.598Z,1513245016.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:16.614Z,1513245016.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:16.997Z,1513245016.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:17.012Z,1513245017.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:17.398Z,1513245017.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:17.413Z,1513245017.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:17.831Z,1513245017.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:17.855Z,1513245017.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:18.206Z,1513245018.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:18.227Z,1513245018.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:18.615Z,1513245018.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:18.650Z,1513245018.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:18.999Z,1513245018.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:19.014Z,1513245019.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:19.400Z,1513245019.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:19.414Z,1513245019.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:19.803Z,1513245019.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:19.818Z,1513245019.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:20.202Z,1513245020.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:20.217Z,1513245020.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:20.614Z,1513245020.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:20.628Z,1513245020.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:21.024Z,1513245021.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:21.054Z,1513245021.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:21.404Z,1513245021.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:21.428Z,1513245021.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:21.801Z,1513245021.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:21.820Z,1513245021.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:22.205Z,1513245022.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:22.227Z,1513245022.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:22.610Z,1513245022.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:22.625Z,1513245022.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:22.995Z,1513245022.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:23.032Z,1513245023.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:23.405Z,1513245023.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:23.421Z,1513245023.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:23.814Z,1513245023.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:23.830Z,1513245023.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:27.317Z,1513245027.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:27.380Z,1513245027.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:27.488Z,1513245027.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:27.535Z,1513245027.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:27.876Z,1513245027.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:27.893Z,1513245027.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:28.276Z,1513245028.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:28.293Z,1513245028.293 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:50:28.293Z,1513245028.293 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:50:28.293Z,1513245028.293 [BPC1](ERROR): Communications Fault
2017-12-14T09:50:28.302Z,1513245028.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:28.340Z,1513245028.340 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:50:28.672Z,1513245028.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:28.695Z,1513245028.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:29.077Z,1513245029.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:29.123Z,1513245029.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:29.476Z,1513245029.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:29.503Z,1513245029.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:29.536Z,1513245029.536 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:50:29.536Z,1513245029.536 [BPC1] No Fault, FailCount= 1
2017-12-14T09:50:29.889Z,1513245029.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:29.970Z,1513245029.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:30.291Z,1513245030.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:30.307Z,1513245030.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:30.738Z,1513245030.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:30.786Z,1513245030.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.070Z,1513245031.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:31.106Z,1513245031.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.477Z,1513245031.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:31.498Z,1513245031.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.881Z,1513245031.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:31.899Z,1513245031.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.900Z,1513245031.900 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186
2017-12-14T09:50:31.900Z,1513245031.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:50:31.902Z,1513245031.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.902Z,1513245031.902 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 186
2017-12-14T09:50:31.902Z,1513245031.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:50:31.904Z,1513245031.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:31.904Z,1513245031.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186
2017-12-14T09:50:31.904Z,1513245031.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:50:31.924Z,1513245031.924 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:50:31.924Z,1513245031.924 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:50:31.924Z,1513245031.924 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:50:32.272Z,1513245032.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:32.338Z,1513245032.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:50:32.338Z,1513245032.338 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186
2017-12-14T09:50:32.339Z,1513245032.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:50:32.339Z,1513245032.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 186
2017-12-14T09:50:32.339Z,1513245032.339 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:50:32.339Z,1513245032.339 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186
2017-12-14T09:50:32.690Z,1513245032.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:32.710Z,1513245032.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:50:32.711Z,1513245032.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:50:32.711Z,1513245032.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:50:32.711Z,1513245032.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:50:32.712Z,1513245032.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:50:32.712Z,1513245032.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:50:32.712Z,1513245032.712 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:50:32.713Z,1513245032.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:50:32.713Z,1513245032.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:50:33.089Z,1513245033.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:33.123Z,1513245033.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:33.481Z,1513245033.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:33.496Z,1513245033.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:33.898Z,1513245033.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:33.971Z,1513245033.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:34.272Z,1513245034.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:34.318Z,1513245034.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:34.679Z,1513245034.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:34.702Z,1513245034.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:35.093Z,1513245035.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:35.116Z,1513245035.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:35.467Z,1513245035.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:35.501Z,1513245035.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:35.873Z,1513245035.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:35.913Z,1513245035.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:36.300Z,1513245036.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:36.314Z,1513245036.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:36.692Z,1513245036.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:36.709Z,1513245036.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:37.063Z,1513245037.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:37.126Z,1513245037.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:37.469Z,1513245037.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:37.515Z,1513245037.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:37.865Z,1513245037.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:37.879Z,1513245037.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:38.271Z,1513245038.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:38.328Z,1513245038.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:38.685Z,1513245038.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:38.717Z,1513245038.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:39.078Z,1513245039.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:39.121Z,1513245039.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:39.486Z,1513245039.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:39.515Z,1513245039.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:39.878Z,1513245039.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:39.916Z,1513245039.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:40.309Z,1513245040.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:40.326Z,1513245040.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:40.672Z,1513245040.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:40.719Z,1513245040.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:41.071Z,1513245041.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:41.098Z,1513245041.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:41.483Z,1513245041.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:41.498Z,1513245041.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:41.880Z,1513245041.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:41.924Z,1513245041.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:42.280Z,1513245042.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:42.302Z,1513245042.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:42.682Z,1513245042.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:42.707Z,1513245042.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:43.080Z,1513245043.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:43.096Z,1513245043.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:43.477Z,1513245043.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:43.522Z,1513245043.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:43.873Z,1513245043.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:43.887Z,1513245043.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:44.271Z,1513245044.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:44.295Z,1513245044.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:44.686Z,1513245044.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:44.708Z,1513245044.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:45.082Z,1513245045.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:45.125Z,1513245045.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:45.482Z,1513245045.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:45.504Z,1513245045.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:45.873Z,1513245045.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:45.896Z,1513245045.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:46.284Z,1513245046.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:46.303Z,1513245046.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:46.672Z,1513245046.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:46.797Z,1513245046.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:47.068Z,1513245047.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:47.106Z,1513245047.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:47.467Z,1513245047.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:47.483Z,1513245047.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:47.886Z,1513245047.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:47.915Z,1513245047.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:48.281Z,1513245048.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:48.314Z,1513245048.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:48.678Z,1513245048.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:48.750Z,1513245048.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:49.063Z,1513245049.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:49.131Z,1513245049.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:49.467Z,1513245049.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:49.501Z,1513245049.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:49.864Z,1513245049.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:49.899Z,1513245049.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:50.263Z,1513245050.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:50.319Z,1513245050.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:50.697Z,1513245050.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:50.712Z,1513245050.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:51.093Z,1513245051.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:51.139Z,1513245051.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:51.489Z,1513245051.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:51.523Z,1513245051.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:51.867Z,1513245051.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:51.903Z,1513245051.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:52.261Z,1513245052.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:52.276Z,1513245052.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:52.669Z,1513245052.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:52.708Z,1513245052.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:53.102Z,1513245053.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:53.138Z,1513245053.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:53.471Z,1513245053.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:53.516Z,1513245053.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:53.892Z,1513245053.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:53.930Z,1513245053.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:54.289Z,1513245054.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:54.322Z,1513245054.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:54.682Z,1513245054.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:54.726Z,1513245054.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:55.063Z,1513245055.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:55.106Z,1513245055.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:55.476Z,1513245055.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:55.499Z,1513245055.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:55.885Z,1513245055.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:55.899Z,1513245055.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:56.291Z,1513245056.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:56.333Z,1513245056.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:56.686Z,1513245056.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:56.719Z,1513245056.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:57.081Z,1513245057.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:57.108Z,1513245057.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:57.487Z,1513245057.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:57.510Z,1513245057.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:57.875Z,1513245057.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:57.916Z,1513245057.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:58.264Z,1513245058.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:58.279Z,1513245058.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:58.680Z,1513245058.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:58.713Z,1513245058.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:59.081Z,1513245059.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:59.112Z,1513245059.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:59.469Z,1513245059.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:59.528Z,1513245059.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:50:59.882Z,1513245059.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:50:59.904Z,1513245059.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:00.283Z,1513245060.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:00.304Z,1513245060.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:00.686Z,1513245060.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:00.701Z,1513245060.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:01.085Z,1513245061.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:01.119Z,1513245061.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:01.463Z,1513245061.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:01.489Z,1513245061.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:01.864Z,1513245061.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:01.896Z,1513245061.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:02.267Z,1513245062.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:02.302Z,1513245062.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:02.691Z,1513245062.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:02.788Z,1513245062.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:03.089Z,1513245063.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:03.111Z,1513245063.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:03.488Z,1513245063.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:03.514Z,1513245063.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:03.863Z,1513245063.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:03.909Z,1513245063.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:04.260Z,1513245064.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:04.275Z,1513245064.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:04.663Z,1513245064.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:04.704Z,1513245064.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:05.072Z,1513245065.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:05.106Z,1513245065.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:05.468Z,1513245065.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:05.513Z,1513245065.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:05.883Z,1513245065.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:05.915Z,1513245065.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:06.285Z,1513245066.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:06.320Z,1513245066.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:06.677Z,1513245066.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:06.712Z,1513245066.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:07.077Z,1513245067.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:07.091Z,1513245067.091 [PNI_TCM](ERROR): CRC does not match. Expected:0x22574 got:0x438
2017-12-14T09:51:07.119Z,1513245067.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:07.474Z,1513245067.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:07.520Z,1513245067.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:07.876Z,1513245067.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:07.890Z,1513245067.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:08.276Z,1513245068.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:08.300Z,1513245068.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:08.679Z,1513245068.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:08.697Z,1513245068.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:09.120Z,1513245069.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:09.135Z,1513245069.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:09.483Z,1513245069.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:09.515Z,1513245069.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:09.864Z,1513245069.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:09.899Z,1513245069.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:10.288Z,1513245070.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:10.340Z,1513245070.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:10.675Z,1513245070.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:10.717Z,1513245070.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:11.072Z,1513245071.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:11.088Z,1513245071.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:11.474Z,1513245071.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:11.495Z,1513245071.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:11.882Z,1513245071.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:11.939Z,1513245071.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:12.297Z,1513245072.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:12.338Z,1513245072.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:12.688Z,1513245072.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:12.727Z,1513245072.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:13.059Z,1513245073.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:13.131Z,1513245073.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:13.471Z,1513245073.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:13.496Z,1513245073.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:13.872Z,1513245073.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:13.923Z,1513245073.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:14.272Z,1513245074.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:14.288Z,1513245074.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:14.684Z,1513245074.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:14.747Z,1513245074.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:15.099Z,1513245075.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:15.113Z,1513245075.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:15.478Z,1513245075.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:15.512Z,1513245075.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:15.863Z,1513245075.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:15.911Z,1513245075.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:16.271Z,1513245076.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:16.313Z,1513245076.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:16.664Z,1513245076.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:16.698Z,1513245076.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:17.093Z,1513245077.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:17.160Z,1513245077.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:17.466Z,1513245077.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:17.506Z,1513245077.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:17.876Z,1513245077.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:17.959Z,1513245077.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:18.306Z,1513245078.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:18.346Z,1513245078.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:18.728Z,1513245078.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:18.768Z,1513245078.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:19.073Z,1513245079.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:19.121Z,1513245079.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:19.473Z,1513245079.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:19.520Z,1513245079.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:19.876Z,1513245079.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:19.894Z,1513245079.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:20.275Z,1513245080.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:20.339Z,1513245080.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:20.646Z,1513245080.646 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T09:51:20.646Z,1513245080.646 [NAL9602] Data Fault, FailCount= 1
2017-12-14T09:51:20.646Z,1513245080.646 [NAL9602](ERROR): Data Fault
2017-12-14T09:51:20.665Z,1513245080.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:20.732Z,1513245080.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:20.764Z,1513245080.764 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T09:51:21.056Z,1513245081.056 [NAL9602](INFO): Powering down
2017-12-14T09:51:21.078Z,1513245081.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:21.143Z,1513245081.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:21.470Z,1513245081.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:21.526Z,1513245081.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:21.872Z,1513245081.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:21.944Z,1513245081.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:22.025Z,1513245082.025 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T09:51:22.025Z,1513245082.025 [NAL9602] No Fault, FailCount= 1
2017-12-14T09:51:22.267Z,1513245082.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:22.312Z,1513245082.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:22.664Z,1513245082.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:22.740Z,1513245082.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:23.092Z,1513245083.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:23.123Z,1513245083.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:23.472Z,1513245083.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:23.525Z,1513245083.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:23.874Z,1513245083.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:23.906Z,1513245083.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:27.954Z,1513245087.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:27.994Z,1513245087.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:28.139Z,1513245088.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:28.218Z,1513245088.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:28.482Z,1513245088.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:28.537Z,1513245088.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:28.844Z,1513245088.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:28.879Z,1513245088.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:29.252Z,1513245089.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:29.271Z,1513245089.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:29.640Z,1513245089.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:29.707Z,1513245089.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:30.040Z,1513245090.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:30.085Z,1513245090.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:30.440Z,1513245090.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:30.479Z,1513245090.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:30.876Z,1513245090.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:30.905Z,1513245090.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:31.248Z,1513245091.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:31.291Z,1513245091.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:31.646Z,1513245091.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:31.686Z,1513245091.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:32.050Z,1513245092.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:32.111Z,1513245092.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:32.467Z,1513245092.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:32.527Z,1513245092.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:32.866Z,1513245092.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:32.963Z,1513245092.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:33.240Z,1513245093.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:33.317Z,1513245093.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:33.649Z,1513245093.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:33.673Z,1513245093.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:34.050Z,1513245094.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:34.074Z,1513245094.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:34.481Z,1513245094.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:34.568Z,1513245094.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:34.866Z,1513245094.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:34.898Z,1513245094.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:35.260Z,1513245095.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:35.295Z,1513245095.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:35.644Z,1513245095.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:35.700Z,1513245095.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:36.048Z,1513245096.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:36.089Z,1513245096.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:36.454Z,1513245096.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:36.539Z,1513245096.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:36.851Z,1513245096.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:36.882Z,1513245096.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:37.249Z,1513245097.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:37.299Z,1513245097.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:37.648Z,1513245097.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:37.672Z,1513245097.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:38.048Z,1513245098.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:38.101Z,1513245098.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:38.460Z,1513245098.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:38.558Z,1513245098.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:38.865Z,1513245098.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:38.908Z,1513245098.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:39.251Z,1513245099.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:39.310Z,1513245099.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:39.648Z,1513245099.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:39.676Z,1513245099.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:40.040Z,1513245100.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:40.076Z,1513245100.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:40.509Z,1513245100.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:40.531Z,1513245100.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:40.841Z,1513245100.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:40.880Z,1513245100.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:41.238Z,1513245101.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:41.279Z,1513245101.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:41.641Z,1513245101.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:41.714Z,1513245101.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:42.040Z,1513245102.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:42.087Z,1513245102.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:42.440Z,1513245102.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:42.475Z,1513245102.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:42.839Z,1513245102.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:42.887Z,1513245102.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:43.247Z,1513245103.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:43.301Z,1513245103.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:43.646Z,1513245103.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:43.673Z,1513245103.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:44.048Z,1513245104.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:44.083Z,1513245104.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:44.432Z,1513245104.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:44.467Z,1513245104.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:44.878Z,1513245104.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:44.946Z,1513245104.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:45.238Z,1513245105.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:45.275Z,1513245105.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:45.632Z,1513245105.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:45.670Z,1513245105.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:46.052Z,1513245106.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:46.067Z,1513245106.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:46.473Z,1513245106.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:46.488Z,1513245106.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:46.839Z,1513245106.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:46.871Z,1513245106.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:47.239Z,1513245107.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:47.264Z,1513245107.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:47.638Z,1513245107.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:47.663Z,1513245107.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:48.042Z,1513245108.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:48.068Z,1513245108.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:48.467Z,1513245108.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:48.486Z,1513245108.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:48.839Z,1513245108.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:48.870Z,1513245108.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:49.238Z,1513245109.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:49.253Z,1513245109.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:49.643Z,1513245109.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:49.658Z,1513245109.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:50.046Z,1513245110.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:50.061Z,1513245110.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:50.477Z,1513245110.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:50.492Z,1513245110.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:50.848Z,1513245110.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:50.911Z,1513245110.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:51.247Z,1513245111.247 [NAL9602](INFO): Powering up NAL9602
2017-12-14T09:51:51.282Z,1513245111.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:51.339Z,1513245111.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:51.645Z,1513245111.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:51.659Z,1513245111.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:52.047Z,1513245112.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:52.083Z,1513245112.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:52.468Z,1513245112.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:52.499Z,1513245112.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:52.850Z,1513245112.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:52.865Z,1513245112.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:53.247Z,1513245113.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:53.262Z,1513245113.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:53.647Z,1513245113.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:53.662Z,1513245113.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:54.048Z,1513245114.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:54.063Z,1513245114.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:54.519Z,1513245114.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:54.570Z,1513245114.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:54.845Z,1513245114.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:54.867Z,1513245114.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:55.249Z,1513245115.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:55.267Z,1513245115.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:55.642Z,1513245115.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:55.697Z,1513245115.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:56.038Z,1513245116.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:56.064Z,1513245116.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:56.442Z,1513245116.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:56.467Z,1513245116.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:56.851Z,1513245116.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:56.882Z,1513245116.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:57.323Z,1513245117.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:57.383Z,1513245117.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:57.641Z,1513245117.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:57.655Z,1513245117.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:57.954Z,1513245117.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:58.038Z,1513245118.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:58.106Z,1513245118.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:58.438Z,1513245118.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:58.477Z,1513245118.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:58.750Z,1513245118.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:58.839Z,1513245118.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:58.908Z,1513245118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:59.165Z,1513245119.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:59.239Z,1513245119.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:59.267Z,1513245119.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:59.642Z,1513245119.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:51:59.669Z,1513245119.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:51:59.962Z,1513245119.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:00.061Z,1513245120.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:00.076Z,1513245120.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:00.464Z,1513245120.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:00.487Z,1513245120.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:00.757Z,1513245120.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:00.863Z,1513245120.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:00.931Z,1513245120.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:01.161Z,1513245121.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:01.246Z,1513245121.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:01.260Z,1513245121.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:01.644Z,1513245121.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:01.672Z,1513245121.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:02.057Z,1513245122.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:02.072Z,1513245122.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:02.442Z,1513245122.442 [NAL9602](INFO): NAL9602 initialized
2017-12-14T09:52:02.461Z,1513245122.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:02.505Z,1513245122.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:02.849Z,1513245122.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:02.864Z,1513245122.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:03.263Z,1513245123.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:03.283Z,1513245123.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:03.661Z,1513245123.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:03.683Z,1513245123.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:04.079Z,1513245124.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:04.115Z,1513245124.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:04.477Z,1513245124.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:04.513Z,1513245124.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:04.851Z,1513245124.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:04.866Z,1513245124.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:05.251Z,1513245125.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:05.266Z,1513245125.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:05.655Z,1513245125.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:05.691Z,1513245125.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:06.050Z,1513245126.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:06.074Z,1513245126.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:06.467Z,1513245126.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:06.492Z,1513245126.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:06.844Z,1513245126.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:06.879Z,1513245126.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:07.267Z,1513245127.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:07.323Z,1513245127.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:07.640Z,1513245127.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:07.674Z,1513245127.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:08.039Z,1513245128.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:08.075Z,1513245128.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:08.502Z,1513245128.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:08.550Z,1513245128.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:08.858Z,1513245128.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:08.907Z,1513245128.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:09.257Z,1513245129.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:09.288Z,1513245129.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:09.658Z,1513245129.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:09.692Z,1513245129.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:10.045Z,1513245130.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:10.059Z,1513245130.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:10.490Z,1513245130.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:10.528Z,1513245130.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:10.843Z,1513245130.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:10.859Z,1513245130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:11.243Z,1513245131.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:11.258Z,1513245131.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:11.661Z,1513245131.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:11.695Z,1513245131.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:11.962Z,1513245131.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:12.062Z,1513245132.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:12.088Z,1513245132.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:12.458Z,1513245132.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:12.522Z,1513245132.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:12.759Z,1513245132.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:12.851Z,1513245132.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:12.866Z,1513245132.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:13.169Z,1513245133.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:13.249Z,1513245133.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:13.264Z,1513245133.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:13.647Z,1513245133.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:13.663Z,1513245133.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:13.966Z,1513245133.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:14.050Z,1513245134.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:14.071Z,1513245134.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:14.461Z,1513245134.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:14.497Z,1513245134.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:14.761Z,1513245134.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:14.852Z,1513245134.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:14.868Z,1513245134.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:15.165Z,1513245135.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:15.261Z,1513245135.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:15.277Z,1513245135.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:15.662Z,1513245135.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:15.677Z,1513245135.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:16.074Z,1513245136.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:16.100Z,1513245136.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:16.462Z,1513245136.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:16.477Z,1513245136.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:16.874Z,1513245136.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:16.959Z,1513245136.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:17.243Z,1513245137.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:17.278Z,1513245137.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:17.653Z,1513245137.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:17.687Z,1513245137.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:18.053Z,1513245138.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:18.083Z,1513245138.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:18.478Z,1513245138.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:18.542Z,1513245138.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:18.852Z,1513245138.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:18.892Z,1513245138.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:19.244Z,1513245139.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:19.259Z,1513245139.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:19.647Z,1513245139.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:19.703Z,1513245139.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:20.051Z,1513245140.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:20.065Z,1513245140.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:20.452Z,1513245140.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:20.503Z,1513245140.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:20.854Z,1513245140.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:20.877Z,1513245140.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:21.262Z,1513245141.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:21.276Z,1513245141.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:21.657Z,1513245141.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:21.687Z,1513245141.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:22.051Z,1513245142.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:22.067Z,1513245142.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:22.523Z,1513245142.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:22.538Z,1513245142.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:22.840Z,1513245142.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:22.870Z,1513245142.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:23.239Z,1513245143.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:23.310Z,1513245143.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:23.669Z,1513245143.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:23.696Z,1513245143.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:23.699Z,1513245143.699 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:47:23.6Z
2017-12-14T09:52:23.700Z,1513245143.700 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T09:52:23.700Z,1513245143.700 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T09:52:24.054Z,1513245144.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:24.068Z,1513245144.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:25.970Z,1513245145.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:26.766Z,1513245146.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:27.180Z,1513245147.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:27.979Z,1513245147.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:28.341Z,1513245148.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:28.357Z,1513245148.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:28.467Z,1513245148.467 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0216.lzma
2017-12-14T09:52:28.501Z,1513245148.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:28.557Z,1513245148.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:28.774Z,1513245148.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:28.884Z,1513245148.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:28.924Z,1513245148.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:29.177Z,1513245149.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:29.264Z,1513245149.264 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0216.lzma.bak
2017-12-14T09:52:29.264Z,1513245149.264 [DataOverHttps](INFO): SBD MOMSN=5438421
2017-12-14T09:52:29.288Z,1513245149.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:29.316Z,1513245149.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:30.867Z,1513245150.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:30.882Z,1513245150.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:30.994Z,1513245150.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:31.027Z,1513245151.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:34.342Z,1513245154.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:34.438Z,1513245154.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:34.523Z,1513245154.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:34.554Z,1513245154.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:34.905Z,1513245154.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:34.944Z,1513245154.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:35.312Z,1513245155.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:35.344Z,1513245155.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:35.718Z,1513245155.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:35.753Z,1513245155.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:36.145Z,1513245156.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:36.289Z,1513245156.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:39.555Z,1513245159.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:39.652Z,1513245159.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:39.705Z,1513245159.705 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0217.lzma
2017-12-14T09:52:39.747Z,1513245159.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:39.779Z,1513245159.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:39.962Z,1513245159.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:40.119Z,1513245160.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:40.179Z,1513245160.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:40.512Z,1513245160.512 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0217.lzma.bak
2017-12-14T09:52:40.512Z,1513245160.512 [DataOverHttps](INFO): SBD MOMSN=5438423
2017-12-14T09:52:40.572Z,1513245160.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:40.606Z,1513245160.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:40.759Z,1513245160.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:41.169Z,1513245161.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:41.650Z,1513245161.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:41.707Z,1513245161.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:41.710Z,1513245161.710 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T09:52:41.710Z,1513245161.710 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T09:52:41.711Z,1513245161.711 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T09:52:41.809Z,1513245161.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:41.852Z,1513245161.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:41.966Z,1513245161.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:42.762Z,1513245162.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:43.165Z,1513245163.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:45.422Z,1513245165.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:45.456Z,1513245165.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:45.566Z,1513245165.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:45.581Z,1513245165.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:45.929Z,1513245165.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:45.964Z,1513245165.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:46.315Z,1513245166.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:46.329Z,1513245166.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:46.715Z,1513245166.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:46.735Z,1513245166.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:47.116Z,1513245167.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:47.137Z,1513245167.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:47.530Z,1513245167.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:47.544Z,1513245167.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:47.929Z,1513245167.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:47.944Z,1513245167.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:48.328Z,1513245168.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:48.342Z,1513245168.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:48.710Z,1513245168.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:48.744Z,1513245168.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:49.110Z,1513245169.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:49.140Z,1513245169.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:49.522Z,1513245169.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:49.551Z,1513245169.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:49.923Z,1513245169.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:49.976Z,1513245169.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:50.332Z,1513245170.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:50.347Z,1513245170.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:50.713Z,1513245170.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:50.742Z,1513245170.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:51.111Z,1513245171.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:51.149Z,1513245171.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:51.533Z,1513245171.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:51.549Z,1513245171.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:51.951Z,1513245171.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:51.974Z,1513245171.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:52.331Z,1513245172.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:52.348Z,1513245172.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:52.715Z,1513245172.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:52.820Z,1513245172.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:53.118Z,1513245173.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:53.133Z,1513245173.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:53.524Z,1513245173.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:53.539Z,1513245173.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:53.923Z,1513245173.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:53.937Z,1513245173.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:53.974Z,1513245173.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:54.321Z,1513245174.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:54.340Z,1513245174.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:54.752Z,1513245174.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:54.770Z,1513245174.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:54.821Z,1513245174.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:55.128Z,1513245175.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:55.164Z,1513245175.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:55.178Z,1513245175.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:55.529Z,1513245175.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:55.559Z,1513245175.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:55.922Z,1513245175.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:55.978Z,1513245175.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:56.327Z,1513245176.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:56.350Z,1513245176.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:56.709Z,1513245176.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:56.746Z,1513245176.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:57.116Z,1513245177.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:57.130Z,1513245177.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:57.526Z,1513245177.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:57.540Z,1513245177.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:57.923Z,1513245177.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:57.943Z,1513245177.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:58.344Z,1513245178.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:58.447Z,1513245178.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:58.718Z,1513245178.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:58.740Z,1513245178.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:59.120Z,1513245179.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:59.135Z,1513245179.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:59.533Z,1513245179.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:59.548Z,1513245179.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:52:59.926Z,1513245179.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:52:59.941Z,1513245179.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:00.330Z,1513245180.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:00.458Z,1513245180.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:00.716Z,1513245180.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:00.731Z,1513245180.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:01.114Z,1513245181.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:01.136Z,1513245181.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:01.518Z,1513245181.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:01.548Z,1513245181.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:01.920Z,1513245181.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:01.951Z,1513245181.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:02.330Z,1513245182.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:02.442Z,1513245182.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:02.712Z,1513245182.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:02.750Z,1513245182.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:03.112Z,1513245183.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:03.164Z,1513245183.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:03.535Z,1513245183.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:03.551Z,1513245183.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:03.937Z,1513245183.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:03.953Z,1513245183.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:04.324Z,1513245184.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:04.348Z,1513245184.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:04.755Z,1513245184.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:04.807Z,1513245184.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:05.119Z,1513245185.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:05.135Z,1513245185.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:05.529Z,1513245185.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:05.544Z,1513245185.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:05.924Z,1513245185.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:05.943Z,1513245185.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:06.325Z,1513245186.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:06.340Z,1513245186.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:06.765Z,1513245186.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:06.821Z,1513245186.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:07.112Z,1513245187.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:07.148Z,1513245187.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:07.557Z,1513245187.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:07.598Z,1513245187.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:07.966Z,1513245187.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:08.008Z,1513245188.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:08.326Z,1513245188.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:08.350Z,1513245188.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:08.788Z,1513245188.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:08.827Z,1513245188.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:09.123Z,1513245189.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:09.137Z,1513245189.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:09.523Z,1513245189.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:09.539Z,1513245189.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:09.933Z,1513245189.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:09.949Z,1513245189.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:10.332Z,1513245190.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:10.347Z,1513245190.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:10.710Z,1513245190.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:10.750Z,1513245190.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:11.168Z,1513245191.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:11.231Z,1513245191.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:11.519Z,1513245191.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:11.535Z,1513245191.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:11.923Z,1513245191.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:11.939Z,1513245191.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:12.320Z,1513245192.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:12.353Z,1513245192.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:12.720Z,1513245192.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:12.734Z,1513245192.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:13.116Z,1513245193.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:13.131Z,1513245193.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:13.522Z,1513245193.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:13.537Z,1513245193.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:13.924Z,1513245193.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:13.938Z,1513245193.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:14.330Z,1513245194.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:14.390Z,1513245194.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:14.708Z,1513245194.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:14.747Z,1513245194.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:15.109Z,1513245195.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:15.123Z,1513245195.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:15.522Z,1513245195.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:15.580Z,1513245195.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:15.929Z,1513245195.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:15.963Z,1513245195.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:16.325Z,1513245196.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:16.352Z,1513245196.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:16.715Z,1513245196.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:16.735Z,1513245196.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:17.118Z,1513245197.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:17.146Z,1513245197.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:17.526Z,1513245197.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:17.540Z,1513245197.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:17.927Z,1513245197.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:17.942Z,1513245197.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:18.330Z,1513245198.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:18.351Z,1513245198.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:18.707Z,1513245198.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:18.743Z,1513245198.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:19.181Z,1513245199.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:19.201Z,1513245199.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:19.529Z,1513245199.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:19.546Z,1513245199.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:19.933Z,1513245199.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:19.952Z,1513245199.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:20.323Z,1513245200.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:20.355Z,1513245200.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:20.810Z,1513245200.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:20.869Z,1513245200.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:21.117Z,1513245201.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:21.131Z,1513245201.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:21.523Z,1513245201.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:21.538Z,1513245201.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:21.924Z,1513245201.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:21.953Z,1513245201.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:22.325Z,1513245202.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:22.393Z,1513245202.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:22.795Z,1513245202.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:22.834Z,1513245202.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:23.106Z,1513245203.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:23.137Z,1513245203.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:23.534Z,1513245203.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:23.608Z,1513245203.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:23.926Z,1513245203.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:23.946Z,1513245203.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:24.329Z,1513245204.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:24.349Z,1513245204.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:24.715Z,1513245204.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:24.760Z,1513245204.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:25.112Z,1513245205.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:25.147Z,1513245205.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:25.532Z,1513245205.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:25.591Z,1513245205.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:25.932Z,1513245205.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:25.947Z,1513245205.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:26.339Z,1513245206.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:26.355Z,1513245206.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:26.720Z,1513245206.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:26.735Z,1513245206.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:27.114Z,1513245207.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:27.194Z,1513245207.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:27.510Z,1513245207.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:27.542Z,1513245207.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:27.925Z,1513245207.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:27.956Z,1513245207.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:28.323Z,1513245208.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:28.357Z,1513245208.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:28.711Z,1513245208.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:28.735Z,1513245208.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:29.148Z,1513245209.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:29.221Z,1513245209.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:29.522Z,1513245209.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:29.536Z,1513245209.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:29.924Z,1513245209.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:29.951Z,1513245209.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:30.342Z,1513245210.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:30.453Z,1513245210.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:30.707Z,1513245210.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:30.743Z,1513245210.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:31.120Z,1513245211.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:31.134Z,1513245211.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:31.527Z,1513245211.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:31.543Z,1513245211.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:31.930Z,1513245211.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:31.946Z,1513245211.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:32.318Z,1513245212.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:32.338Z,1513245212.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:32.722Z,1513245212.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:32.736Z,1513245212.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:32.736Z,1513245212.736 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187
2017-12-14T09:53:32.737Z,1513245212.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:53:32.739Z,1513245212.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:32.739Z,1513245212.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 187
2017-12-14T09:53:32.739Z,1513245212.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:53:32.741Z,1513245212.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:32.741Z,1513245212.741 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187
2017-12-14T09:53:32.741Z,1513245212.741 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:53:32.754Z,1513245212.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:53:32.754Z,1513245212.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:53:32.754Z,1513245212.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:53:33.107Z,1513245213.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:33.146Z,1513245213.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:53:33.147Z,1513245213.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187
2017-12-14T09:53:33.147Z,1513245213.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:53:33.147Z,1513245213.147 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 187
2017-12-14T09:53:33.147Z,1513245213.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:53:33.148Z,1513245213.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187
2017-12-14T09:53:33.519Z,1513245213.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:33.540Z,1513245213.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:53:33.541Z,1513245213.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:53:33.541Z,1513245213.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:53:33.542Z,1513245213.542 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:53:33.542Z,1513245213.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:53:33.543Z,1513245213.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:53:33.543Z,1513245213.543 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:53:33.543Z,1513245213.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:53:33.544Z,1513245213.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:53:33.925Z,1513245213.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:33.994Z,1513245213.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:34.335Z,1513245214.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:34.350Z,1513245214.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:34.758Z,1513245214.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:34.811Z,1513245214.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:35.114Z,1513245215.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:35.145Z,1513245215.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:35.526Z,1513245215.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:35.558Z,1513245215.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:35.922Z,1513245215.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:35.957Z,1513245215.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:36.326Z,1513245216.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:36.355Z,1513245216.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:36.772Z,1513245216.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:36.902Z,1513245216.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:37.115Z,1513245217.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:37.130Z,1513245217.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:37.522Z,1513245217.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:37.537Z,1513245217.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:37.923Z,1513245217.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:37.937Z,1513245217.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:38.318Z,1513245218.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:38.344Z,1513245218.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:38.709Z,1513245218.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:38.734Z,1513245218.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:39.107Z,1513245219.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:39.139Z,1513245219.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:39.520Z,1513245219.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:39.543Z,1513245219.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:39.922Z,1513245219.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:39.949Z,1513245219.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:40.316Z,1513245220.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:40.353Z,1513245220.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:40.715Z,1513245220.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:40.743Z,1513245220.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:41.115Z,1513245221.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:41.142Z,1513245221.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:41.530Z,1513245221.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:41.560Z,1513245221.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:41.926Z,1513245221.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:41.956Z,1513245221.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:42.331Z,1513245222.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:42.356Z,1513245222.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:45.739Z,1513245225.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:45.791Z,1513245225.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:45.889Z,1513245225.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:45.954Z,1513245225.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:46.322Z,1513245226.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:46.358Z,1513245226.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:46.699Z,1513245226.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:46.759Z,1513245226.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:47.102Z,1513245227.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:47.118Z,1513245227.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:47.483Z,1513245227.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:47.547Z,1513245227.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:47.871Z,1513245227.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:47.906Z,1513245227.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:48.272Z,1513245228.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:48.308Z,1513245228.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:48.701Z,1513245228.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:48.796Z,1513245228.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:49.104Z,1513245229.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:49.123Z,1513245229.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:49.481Z,1513245229.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:49.519Z,1513245229.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:49.876Z,1513245229.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:49.904Z,1513245229.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:50.283Z,1513245230.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:50.311Z,1513245230.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:50.673Z,1513245230.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:50.794Z,1513245230.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:51.087Z,1513245231.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:51.110Z,1513245231.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:51.475Z,1513245231.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:51.509Z,1513245231.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:51.888Z,1513245231.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:51.916Z,1513245231.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:52.297Z,1513245232.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:52.320Z,1513245232.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:52.703Z,1513245232.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:52.739Z,1513245232.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:53.083Z,1513245233.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:53.103Z,1513245233.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:53.486Z,1513245233.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:53.500Z,1513245233.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:53.880Z,1513245233.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:53.953Z,1513245233.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:54.268Z,1513245234.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:54.314Z,1513245234.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:54.693Z,1513245234.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:54.707Z,1513245234.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:55.098Z,1513245235.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:55.131Z,1513245235.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:55.491Z,1513245235.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:55.523Z,1513245235.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:55.902Z,1513245235.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:55.968Z,1513245235.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:56.271Z,1513245236.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:56.310Z,1513245236.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:56.675Z,1513245236.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:56.704Z,1513245236.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:57.072Z,1513245237.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:57.102Z,1513245237.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:57.479Z,1513245237.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:57.512Z,1513245237.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:57.891Z,1513245237.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:57.923Z,1513245237.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:58.303Z,1513245238.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:58.318Z,1513245238.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:58.685Z,1513245238.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:58.722Z,1513245238.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:59.100Z,1513245239.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:59.139Z,1513245239.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:59.479Z,1513245239.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:59.501Z,1513245239.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:53:59.888Z,1513245239.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:53:59.902Z,1513245239.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:00.277Z,1513245240.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:00.318Z,1513245240.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:00.682Z,1513245240.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:00.704Z,1513245240.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:01.088Z,1513245241.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:01.105Z,1513245241.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:01.486Z,1513245241.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:01.522Z,1513245241.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:01.883Z,1513245241.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:01.926Z,1513245241.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:02.318Z,1513245242.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:02.343Z,1513245242.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:02.684Z,1513245242.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:02.703Z,1513245242.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:03.079Z,1513245243.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:03.111Z,1513245243.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:03.472Z,1513245243.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:03.514Z,1513245243.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:03.898Z,1513245243.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:03.915Z,1513245243.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:04.306Z,1513245244.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:04.321Z,1513245244.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:04.699Z,1513245244.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:04.776Z,1513245244.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:05.072Z,1513245245.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:05.118Z,1513245245.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:05.518Z,1513245245.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:05.553Z,1513245245.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:05.882Z,1513245245.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:05.925Z,1513245245.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:06.282Z,1513245246.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:06.296Z,1513245246.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:06.694Z,1513245246.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:06.749Z,1513245246.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:07.085Z,1513245247.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:07.096Z,1513245247.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T09:54:07.120Z,1513245247.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:07.488Z,1513245247.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:07.496Z,1513245247.496 [PNI_TCM](ERROR): CRC does not match. Expected:0x10272 got:0x16850
2017-12-14T09:54:07.527Z,1513245247.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:07.883Z,1513245247.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:07.928Z,1513245247.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:08.280Z,1513245248.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:08.318Z,1513245248.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:08.671Z,1513245248.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:08.759Z,1513245248.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:09.078Z,1513245249.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:09.100Z,1513245249.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:09.482Z,1513245249.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:09.524Z,1513245249.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:09.894Z,1513245249.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:09.924Z,1513245249.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:10.298Z,1513245250.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:10.314Z,1513245250.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x63515 got:0x32792
2017-12-14T09:54:10.339Z,1513245250.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:10.694Z,1513245250.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:10.708Z,1513245250.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:11.081Z,1513245251.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:11.104Z,1513245251.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:11.488Z,1513245251.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:11.530Z,1513245251.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:11.923Z,1513245251.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:11.938Z,1513245251.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:12.271Z,1513245252.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:12.315Z,1513245252.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:12.703Z,1513245252.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:12.723Z,1513245252.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:13.099Z,1513245253.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:13.120Z,1513245253.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:13.486Z,1513245253.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:13.519Z,1513245253.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:13.875Z,1513245253.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:13.910Z,1513245253.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:14.273Z,1513245254.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:14.311Z,1513245254.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:14.669Z,1513245254.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:14.714Z,1513245254.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:15.105Z,1513245255.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:15.152Z,1513245255.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:15.472Z,1513245255.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:15.515Z,1513245255.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:15.900Z,1513245255.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:15.919Z,1513245255.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:16.286Z,1513245256.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:16.331Z,1513245256.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:16.684Z,1513245256.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:16.708Z,1513245256.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x35080 got:0x42241
2017-12-14T09:54:16.784Z,1513245256.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:17.067Z,1513245257.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:17.111Z,1513245257.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:17.492Z,1513245257.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:17.499Z,1513245257.499 [PNI_TCM](ERROR): CRC does not match. Expected:0x4755 got:0x46730
2017-12-14T09:54:17.536Z,1513245257.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:17.883Z,1513245257.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:17.932Z,1513245257.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:18.296Z,1513245258.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:18.346Z,1513245258.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:18.698Z,1513245258.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:18.782Z,1513245258.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:19.091Z,1513245259.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:19.117Z,1513245259.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:19.482Z,1513245259.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:19.523Z,1513245259.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:19.872Z,1513245259.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:19.886Z,1513245259.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:20.279Z,1513245260.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:20.317Z,1513245260.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:20.686Z,1513245260.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:20.700Z,1513245260.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:21.076Z,1513245261.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:21.121Z,1513245261.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:21.482Z,1513245261.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:21.503Z,1513245261.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:21.902Z,1513245261.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:21.932Z,1513245261.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:22.290Z,1513245262.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:22.304Z,1513245262.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:22.686Z,1513245262.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:22.722Z,1513245262.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:23.082Z,1513245263.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:23.106Z,1513245263.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:23.483Z,1513245263.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:23.505Z,1513245263.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:23.892Z,1513245263.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:23.907Z,1513245263.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:24.278Z,1513245264.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:24.314Z,1513245264.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:24.727Z,1513245264.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:24.748Z,1513245264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:25.102Z,1513245265.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:25.134Z,1513245265.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:25.502Z,1513245265.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:25.527Z,1513245265.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:25.884Z,1513245265.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:25.919Z,1513245265.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:26.285Z,1513245266.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:26.308Z,1513245266.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:26.684Z,1513245266.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:26.704Z,1513245266.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:27.079Z,1513245267.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:27.108Z,1513245267.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:27.480Z,1513245267.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:27.515Z,1513245267.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:27.896Z,1513245267.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:27.948Z,1513245267.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:28.299Z,1513245268.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:28.330Z,1513245268.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:28.700Z,1513245268.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:28.744Z,1513245268.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:29.067Z,1513245269.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:29.116Z,1513245269.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:29.471Z,1513245269.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:29.522Z,1513245269.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:29.875Z,1513245269.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:29.953Z,1513245269.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:30.274Z,1513245270.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:30.305Z,1513245270.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:30.685Z,1513245270.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:30.795Z,1513245270.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:31.118Z,1513245271.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:31.171Z,1513245271.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:31.487Z,1513245271.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:31.535Z,1513245271.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:31.885Z,1513245271.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:31.900Z,1513245271.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:32.279Z,1513245272.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:32.325Z,1513245272.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:32.672Z,1513245272.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:32.692Z,1513245272.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:33.076Z,1513245273.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:33.118Z,1513245273.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:33.485Z,1513245273.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:33.499Z,1513245273.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:33.894Z,1513245273.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:33.931Z,1513245273.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:34.314Z,1513245274.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:34.320Z,1513245274.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x27339 got:0x6591
2017-12-14T09:54:34.420Z,1513245274.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:34.693Z,1513245274.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:34.715Z,1513245274.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:35.090Z,1513245275.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:35.109Z,1513245275.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:35.480Z,1513245275.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:35.515Z,1513245275.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:35.897Z,1513245275.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:35.913Z,1513245275.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:36.272Z,1513245276.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:36.310Z,1513245276.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:36.696Z,1513245276.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:36.715Z,1513245276.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:37.098Z,1513245277.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:37.121Z,1513245277.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:37.477Z,1513245277.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:37.511Z,1513245277.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:37.871Z,1513245277.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:37.911Z,1513245277.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:38.268Z,1513245278.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:38.307Z,1513245278.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:38.671Z,1513245278.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:38.714Z,1513245278.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:39.071Z,1513245279.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:39.112Z,1513245279.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:39.475Z,1513245279.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:39.511Z,1513245279.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:39.883Z,1513245279.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:39.939Z,1513245279.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:40.299Z,1513245280.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:40.321Z,1513245280.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:40.724Z,1513245280.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:40.773Z,1513245280.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:41.090Z,1513245281.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:41.120Z,1513245281.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:41.486Z,1513245281.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:41.533Z,1513245281.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:41.878Z,1513245281.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:41.926Z,1513245281.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:42.275Z,1513245282.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:42.302Z,1513245282.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:42.704Z,1513245282.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:42.728Z,1513245282.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:46.093Z,1513245286.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:46.151Z,1513245286.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:46.266Z,1513245286.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:46.292Z,1513245286.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:46.632Z,1513245286.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:46.675Z,1513245286.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:47.040Z,1513245287.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:47.056Z,1513245287.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:47.423Z,1513245287.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:47.448Z,1513245287.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:47.842Z,1513245287.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:47.857Z,1513245287.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:48.247Z,1513245288.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:48.261Z,1513245288.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:48.644Z,1513245288.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:48.663Z,1513245288.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:49.027Z,1513245289.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:49.058Z,1513245289.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:49.423Z,1513245289.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:49.437Z,1513245289.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:49.827Z,1513245289.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:49.863Z,1513245289.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:50.231Z,1513245290.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:50.314Z,1513245290.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:50.649Z,1513245290.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:50.684Z,1513245290.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:51.038Z,1513245291.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:51.059Z,1513245291.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:51.439Z,1513245291.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:51.454Z,1513245291.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:51.827Z,1513245291.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:51.859Z,1513245291.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:52.226Z,1513245292.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:52.296Z,1513245292.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:52.633Z,1513245292.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:52.648Z,1513245292.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:53.036Z,1513245293.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:53.050Z,1513245293.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:53.430Z,1513245293.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:53.483Z,1513245293.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:53.858Z,1513245293.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:53.892Z,1513245293.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:54.246Z,1513245294.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:54.299Z,1513245294.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:54.643Z,1513245294.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:54.658Z,1513245294.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:55.027Z,1513245295.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:55.063Z,1513245295.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:55.439Z,1513245295.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:55.453Z,1513245295.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:55.835Z,1513245295.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:55.854Z,1513245295.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:56.223Z,1513245296.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:56.261Z,1513245296.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:56.669Z,1513245296.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:56.709Z,1513245296.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:57.047Z,1513245297.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:57.061Z,1513245297.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:57.443Z,1513245297.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:57.459Z,1513245297.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:57.824Z,1513245297.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:57.860Z,1513245297.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:58.220Z,1513245298.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:58.259Z,1513245298.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:58.635Z,1513245298.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:58.651Z,1513245298.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:59.030Z,1513245299.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:59.067Z,1513245299.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:59.425Z,1513245299.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:59.447Z,1513245299.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:54:59.887Z,1513245299.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:54:59.933Z,1513245299.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:00.245Z,1513245300.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:00.273Z,1513245300.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:00.635Z,1513245300.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:00.650Z,1513245300.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:01.040Z,1513245301.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:01.056Z,1513245301.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:01.432Z,1513245301.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:01.446Z,1513245301.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:01.830Z,1513245301.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:01.851Z,1513245301.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:02.237Z,1513245302.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:02.251Z,1513245302.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:02.642Z,1513245302.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:02.687Z,1513245302.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:03.057Z,1513245303.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:03.088Z,1513245303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:03.440Z,1513245303.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:03.460Z,1513245303.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:03.836Z,1513245303.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:03.850Z,1513245303.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:04.224Z,1513245304.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:04.250Z,1513245304.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:04.623Z,1513245304.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:04.655Z,1513245304.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:05.024Z,1513245305.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:05.059Z,1513245305.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:05.417Z,1513245305.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:05.432Z,1513245305.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:05.833Z,1513245305.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:05.866Z,1513245305.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:06.281Z,1513245306.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:06.310Z,1513245306.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:06.637Z,1513245306.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:06.651Z,1513245306.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:07.041Z,1513245307.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:07.056Z,1513245307.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:07.432Z,1513245307.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:07.446Z,1513245307.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:07.836Z,1513245307.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:07.851Z,1513245307.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:08.233Z,1513245308.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:08.247Z,1513245308.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:08.638Z,1513245308.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:08.666Z,1513245308.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:09.038Z,1513245309.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:09.065Z,1513245309.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:09.444Z,1513245309.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:09.459Z,1513245309.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:09.823Z,1513245309.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:09.849Z,1513245309.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:10.224Z,1513245310.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:10.251Z,1513245310.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:10.623Z,1513245310.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:10.655Z,1513245310.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:11.024Z,1513245311.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:11.059Z,1513245311.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:11.423Z,1513245311.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:11.459Z,1513245311.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:11.841Z,1513245311.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:11.861Z,1513245311.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:12.251Z,1513245312.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:12.265Z,1513245312.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:12.647Z,1513245312.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:12.678Z,1513245312.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:13.028Z,1513245313.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:13.044Z,1513245313.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:13.431Z,1513245313.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:13.451Z,1513245313.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:13.834Z,1513245313.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:13.849Z,1513245313.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:14.226Z,1513245314.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:14.258Z,1513245314.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:14.638Z,1513245314.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:14.802Z,1513245314.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:15.050Z,1513245315.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:15.084Z,1513245315.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:15.445Z,1513245315.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:15.517Z,1513245315.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:15.827Z,1513245315.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:15.842Z,1513245315.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:16.223Z,1513245316.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:16.278Z,1513245316.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:16.631Z,1513245316.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:16.647Z,1513245316.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:17.034Z,1513245317.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:17.048Z,1513245317.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:17.432Z,1513245317.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:17.451Z,1513245317.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:17.837Z,1513245317.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:17.852Z,1513245317.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:18.242Z,1513245318.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:18.256Z,1513245318.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:18.637Z,1513245318.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:18.652Z,1513245318.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:19.063Z,1513245319.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:19.110Z,1513245319.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:19.440Z,1513245319.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:19.455Z,1513245319.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:19.837Z,1513245319.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:19.852Z,1513245319.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:20.222Z,1513245320.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:20.256Z,1513245320.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:20.651Z,1513245320.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:20.671Z,1513245320.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:21.047Z,1513245321.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:21.063Z,1513245321.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:21.445Z,1513245321.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:21.460Z,1513245321.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:21.824Z,1513245321.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:21.855Z,1513245321.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:22.220Z,1513245322.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:22.284Z,1513245322.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:22.632Z,1513245322.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:22.651Z,1513245322.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:23.031Z,1513245323.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:23.054Z,1513245323.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:23.436Z,1513245323.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:23.455Z,1513245323.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:23.840Z,1513245323.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:23.856Z,1513245323.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:24.241Z,1513245324.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:24.256Z,1513245324.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:24.640Z,1513245324.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:24.702Z,1513245324.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:25.032Z,1513245325.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:25.047Z,1513245325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:25.442Z,1513245325.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:25.457Z,1513245325.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:25.823Z,1513245325.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:25.851Z,1513245325.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:26.222Z,1513245326.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:26.263Z,1513245326.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:26.637Z,1513245326.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:26.668Z,1513245326.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:27.038Z,1513245327.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:27.052Z,1513245327.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:27.437Z,1513245327.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:27.455Z,1513245327.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:27.836Z,1513245327.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:27.851Z,1513245327.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:28.230Z,1513245328.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:28.261Z,1513245328.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:28.681Z,1513245328.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:28.784Z,1513245328.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:29.024Z,1513245329.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:29.059Z,1513245329.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:29.423Z,1513245329.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:29.458Z,1513245329.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:29.832Z,1513245329.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:29.866Z,1513245329.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:30.252Z,1513245330.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:30.267Z,1513245330.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:30.634Z,1513245330.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:30.667Z,1513245330.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:31.023Z,1513245331.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:31.060Z,1513245331.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:31.424Z,1513245331.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:31.460Z,1513245331.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:31.827Z,1513245331.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:31.859Z,1513245331.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:32.235Z,1513245332.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:32.264Z,1513245332.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:32.665Z,1513245332.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:32.688Z,1513245332.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:33.039Z,1513245333.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:33.078Z,1513245333.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:33.435Z,1513245333.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:33.468Z,1513245333.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:33.823Z,1513245333.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:33.863Z,1513245333.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:34.231Z,1513245334.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:34.248Z,1513245334.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:34.633Z,1513245334.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:34.649Z,1513245334.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:35.044Z,1513245335.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:35.086Z,1513245335.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:35.431Z,1513245335.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:35.452Z,1513245335.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:35.838Z,1513245335.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:35.854Z,1513245335.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:36.242Z,1513245336.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:36.296Z,1513245336.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:36.654Z,1513245336.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:36.687Z,1513245336.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:37.026Z,1513245337.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:37.080Z,1513245337.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:37.436Z,1513245337.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:37.452Z,1513245337.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:37.824Z,1513245337.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:37.887Z,1513245337.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:38.222Z,1513245338.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:38.317Z,1513245338.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:38.637Z,1513245338.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:38.694Z,1513245338.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:39.042Z,1513245339.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:39.082Z,1513245339.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:39.441Z,1513245339.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:39.476Z,1513245339.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:39.832Z,1513245339.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:39.847Z,1513245339.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:40.233Z,1513245340.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:40.248Z,1513245340.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:40.632Z,1513245340.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:40.646Z,1513245340.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:41.033Z,1513245341.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:41.048Z,1513245341.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:41.432Z,1513245341.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:41.471Z,1513245341.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:41.846Z,1513245341.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:41.876Z,1513245341.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:42.231Z,1513245342.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:42.281Z,1513245342.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:42.641Z,1513245342.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:42.656Z,1513245342.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:43.024Z,1513245343.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:43.059Z,1513245343.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:46.603Z,1513245346.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:46.618Z,1513245346.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:46.715Z,1513245346.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:46.764Z,1513245346.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:47.110Z,1513245347.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:47.125Z,1513245347.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:47.515Z,1513245347.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:47.530Z,1513245347.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:47.923Z,1513245347.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:47.962Z,1513245347.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:48.291Z,1513245348.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:48.329Z,1513245348.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:48.696Z,1513245348.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:48.727Z,1513245348.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:49.087Z,1513245349.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:49.134Z,1513245349.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:49.504Z,1513245349.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:49.528Z,1513245349.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:49.917Z,1513245349.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:49.932Z,1513245349.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:50.295Z,1513245350.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:50.319Z,1513245350.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:50.695Z,1513245350.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:50.724Z,1513245350.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:51.104Z,1513245351.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:51.115Z,1513245351.115 [PNI_TCM](ERROR): CRC does not match. Expected:0x26726 got:0x23581
2017-12-14T09:55:51.151Z,1513245351.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:51.508Z,1513245351.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:51.528Z,1513245351.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:51.913Z,1513245351.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:51.927Z,1513245351.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:52.318Z,1513245352.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:52.332Z,1513245352.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:52.687Z,1513245352.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:52.721Z,1513245352.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:53.099Z,1513245353.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:53.117Z,1513245353.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:53.511Z,1513245353.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:53.525Z,1513245353.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:53.918Z,1513245353.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:53.932Z,1513245353.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:54.335Z,1513245354.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:54.378Z,1513245354.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:54.764Z,1513245354.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:54.814Z,1513245354.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:55.103Z,1513245355.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:55.118Z,1513245355.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:55.511Z,1513245355.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:55.525Z,1513245355.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:55.918Z,1513245355.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:55.960Z,1513245355.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:56.313Z,1513245356.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:56.328Z,1513245356.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:56.743Z,1513245356.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:56.779Z,1513245356.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:57.091Z,1513245357.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:57.127Z,1513245357.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:57.522Z,1513245357.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:57.561Z,1513245357.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:57.903Z,1513245357.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:57.931Z,1513245357.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:58.318Z,1513245358.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:58.333Z,1513245358.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:58.689Z,1513245358.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:58.775Z,1513245358.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:59.099Z,1513245359.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:59.114Z,1513245359.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:59.510Z,1513245359.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:59.552Z,1513245359.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:55:59.914Z,1513245359.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:55:59.943Z,1513245359.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:00.297Z,1513245360.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:00.348Z,1513245360.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:00.688Z,1513245360.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:00.772Z,1513245360.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:01.102Z,1513245361.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:01.117Z,1513245361.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:01.513Z,1513245361.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:01.546Z,1513245361.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:01.922Z,1513245361.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:01.951Z,1513245361.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:02.302Z,1513245362.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:02.331Z,1513245362.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:02.691Z,1513245362.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:02.722Z,1513245362.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:03.096Z,1513245363.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:03.123Z,1513245363.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:03.508Z,1513245363.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:03.535Z,1513245363.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:03.920Z,1513245363.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:03.975Z,1513245363.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:04.312Z,1513245364.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:04.331Z,1513245364.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:04.703Z,1513245364.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:04.727Z,1513245364.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:05.097Z,1513245365.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:05.119Z,1513245365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:05.510Z,1513245365.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:05.540Z,1513245365.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:05.901Z,1513245365.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:05.939Z,1513245365.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:06.313Z,1513245366.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:06.343Z,1513245366.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:06.694Z,1513245366.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:06.727Z,1513245366.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:07.139Z,1513245367.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:07.166Z,1513245367.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:07.509Z,1513245367.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:07.548Z,1513245367.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:07.910Z,1513245367.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:07.924Z,1513245367.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:08.303Z,1513245368.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:08.330Z,1513245368.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:08.738Z,1513245368.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:08.823Z,1513245368.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:09.100Z,1513245369.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:09.116Z,1513245369.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:09.514Z,1513245369.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:09.539Z,1513245369.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:09.910Z,1513245369.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:09.938Z,1513245369.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:10.312Z,1513245370.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:10.384Z,1513245370.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:10.710Z,1513245370.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:10.811Z,1513245370.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:11.103Z,1513245371.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:11.117Z,1513245371.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:11.510Z,1513245371.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:11.541Z,1513245371.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:11.910Z,1513245371.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:11.948Z,1513245371.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:12.308Z,1513245372.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:12.322Z,1513245372.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:12.696Z,1513245372.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:12.731Z,1513245372.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:13.088Z,1513245373.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:13.120Z,1513245373.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:13.532Z,1513245373.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:13.578Z,1513245373.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:13.912Z,1513245373.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:13.927Z,1513245373.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:14.310Z,1513245374.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:14.325Z,1513245374.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:14.687Z,1513245374.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:14.729Z,1513245374.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:15.087Z,1513245375.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:15.134Z,1513245375.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:15.518Z,1513245375.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:15.533Z,1513245375.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:15.922Z,1513245375.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:15.937Z,1513245375.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:16.322Z,1513245376.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:16.343Z,1513245376.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:16.713Z,1513245376.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:16.765Z,1513245376.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:17.105Z,1513245377.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:17.132Z,1513245377.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:17.518Z,1513245377.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:17.540Z,1513245377.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:17.928Z,1513245377.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:17.959Z,1513245377.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:18.331Z,1513245378.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:18.346Z,1513245378.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:18.694Z,1513245378.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:18.753Z,1513245378.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:19.141Z,1513245379.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:19.229Z,1513245379.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:19.517Z,1513245379.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:19.581Z,1513245379.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:19.935Z,1513245379.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:19.994Z,1513245379.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:20.323Z,1513245380.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:20.375Z,1513245380.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:20.705Z,1513245380.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:20.786Z,1513245380.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:21.092Z,1513245381.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:21.116Z,1513245381.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:21.510Z,1513245381.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:21.575Z,1513245381.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:21.916Z,1513245381.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:21.970Z,1513245381.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:22.313Z,1513245382.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:22.378Z,1513245382.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:22.723Z,1513245382.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:22.834Z,1513245382.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:23.135Z,1513245383.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:23.180Z,1513245383.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:23.505Z,1513245383.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:23.548Z,1513245383.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:23.916Z,1513245383.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:23.952Z,1513245383.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:24.312Z,1513245384.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:24.360Z,1513245384.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:24.750Z,1513245384.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:24.812Z,1513245384.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:25.104Z,1513245385.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:25.119Z,1513245385.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:25.525Z,1513245385.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:25.594Z,1513245385.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:25.918Z,1513245385.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:25.988Z,1513245385.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:26.304Z,1513245386.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:26.339Z,1513245386.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:26.701Z,1513245386.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:26.774Z,1513245386.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:27.115Z,1513245387.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:27.181Z,1513245387.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:27.513Z,1513245387.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:27.611Z,1513245387.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:27.917Z,1513245387.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:27.959Z,1513245387.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:28.315Z,1513245388.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:28.348Z,1513245388.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:28.696Z,1513245388.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:28.739Z,1513245388.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:29.089Z,1513245389.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:29.131Z,1513245389.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:29.508Z,1513245389.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:29.597Z,1513245389.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:29.925Z,1513245389.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:30.004Z,1513245390.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:30.339Z,1513245390.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:30.504Z,1513245390.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:30.732Z,1513245390.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:30.803Z,1513245390.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:31.140Z,1513245391.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:31.164Z,1513245391.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:31.535Z,1513245391.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:31.563Z,1513245391.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:31.928Z,1513245391.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:31.982Z,1513245391.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:32.332Z,1513245392.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:32.352Z,1513245392.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:32.718Z,1513245392.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:32.760Z,1513245392.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:33.093Z,1513245393.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:33.175Z,1513245393.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:33.534Z,1513245393.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:33.563Z,1513245393.563 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:33.563Z,1513245393.563 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188
2017-12-14T09:56:33.563Z,1513245393.563 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:56:33.573Z,1513245393.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:33.574Z,1513245393.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 188
2017-12-14T09:56:33.574Z,1513245393.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:56:33.576Z,1513245393.576 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:33.576Z,1513245393.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188
2017-12-14T09:56:33.576Z,1513245393.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:56:33.614Z,1513245393.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:56:33.614Z,1513245393.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:56:33.615Z,1513245393.615 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:56:33.942Z,1513245393.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:34.011Z,1513245394.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:56:34.011Z,1513245394.011 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188
2017-12-14T09:56:34.012Z,1513245394.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:56:34.012Z,1513245394.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 188
2017-12-14T09:56:34.012Z,1513245394.012 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:56:34.012Z,1513245394.012 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188
2017-12-14T09:56:34.315Z,1513245394.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:34.362Z,1513245394.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:56:34.362Z,1513245394.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:56:34.363Z,1513245394.363 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:56:34.363Z,1513245394.363 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:56:34.363Z,1513245394.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:56:34.364Z,1513245394.364 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:56:34.364Z,1513245394.364 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:56:34.381Z,1513245394.381 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:56:34.381Z,1513245394.381 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:56:34.694Z,1513245394.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:34.758Z,1513245394.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:35.095Z,1513245395.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:35.143Z,1513245395.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:35.501Z,1513245395.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:35.595Z,1513245395.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:35.914Z,1513245395.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:35.975Z,1513245395.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:36.316Z,1513245396.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:36.359Z,1513245396.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:36.713Z,1513245396.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:36.812Z,1513245396.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:37.088Z,1513245397.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:37.247Z,1513245397.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:37.537Z,1513245397.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:37.619Z,1513245397.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:37.921Z,1513245397.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:37.956Z,1513245397.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:38.310Z,1513245398.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:38.334Z,1513245398.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:38.698Z,1513245398.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:38.819Z,1513245398.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:39.088Z,1513245399.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:39.162Z,1513245399.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:39.513Z,1513245399.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:39.532Z,1513245399.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:39.916Z,1513245399.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:39.943Z,1513245399.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:40.326Z,1513245400.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:40.434Z,1513245400.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:40.730Z,1513245400.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:40.758Z,1513245400.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:41.093Z,1513245401.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:41.151Z,1513245401.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:41.518Z,1513245401.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:41.541Z,1513245401.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:41.918Z,1513245401.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:41.943Z,1513245401.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:42.315Z,1513245402.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:42.434Z,1513245402.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:42.704Z,1513245402.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:42.794Z,1513245402.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:43.107Z,1513245403.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:43.135Z,1513245403.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:50.360Z,1513245410.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:50.434Z,1513245410.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:50.578Z,1513245410.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:50.631Z,1513245410.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:50.932Z,1513245410.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:50.983Z,1513245410.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:51.322Z,1513245411.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:51.363Z,1513245411.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:51.727Z,1513245411.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:51.742Z,1513245411.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:52.126Z,1513245412.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:52.141Z,1513245412.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:52.534Z,1513245412.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:52.548Z,1513245412.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:52.945Z,1513245412.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:52.960Z,1513245412.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:53.338Z,1513245413.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:53.352Z,1513245413.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:53.728Z,1513245413.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:53.744Z,1513245413.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:54.127Z,1513245414.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:54.147Z,1513245414.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:54.538Z,1513245414.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:54.552Z,1513245414.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:54.938Z,1513245414.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:54.959Z,1513245414.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:55.334Z,1513245415.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:55.349Z,1513245415.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:55.724Z,1513245415.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:55.739Z,1513245415.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:56.123Z,1513245416.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:56.143Z,1513245416.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:56.538Z,1513245416.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:56.552Z,1513245416.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:56.937Z,1513245416.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:56.952Z,1513245416.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:57.369Z,1513245417.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:57.388Z,1513245417.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:57.733Z,1513245417.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:57.748Z,1513245417.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:58.122Z,1513245418.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:58.147Z,1513245418.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:58.524Z,1513245418.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:58.540Z,1513245418.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:58.922Z,1513245418.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:58.943Z,1513245418.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:59.334Z,1513245419.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:59.380Z,1513245419.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:56:59.738Z,1513245419.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:56:59.754Z,1513245419.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:00.138Z,1513245420.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:00.152Z,1513245420.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:00.547Z,1513245420.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:00.579Z,1513245420.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:00.915Z,1513245420.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:00.950Z,1513245420.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:01.315Z,1513245421.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:01.347Z,1513245421.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:01.716Z,1513245421.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:01.747Z,1513245421.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:02.119Z,1513245422.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:02.152Z,1513245422.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:02.550Z,1513245422.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:02.571Z,1513245422.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:02.966Z,1513245422.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:03.011Z,1513245423.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:03.338Z,1513245423.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:03.367Z,1513245423.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:03.743Z,1513245423.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:03.766Z,1513245423.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:04.141Z,1513245424.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:04.159Z,1513245424.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:04.529Z,1513245424.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:04.561Z,1513245424.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:04.954Z,1513245424.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:04.975Z,1513245424.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:05.331Z,1513245425.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:05.359Z,1513245425.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:05.720Z,1513245425.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:05.755Z,1513245425.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:06.123Z,1513245426.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:06.152Z,1513245426.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:06.540Z,1513245426.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:06.555Z,1513245426.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:06.931Z,1513245426.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:07.002Z,1513245427.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:07.348Z,1513245427.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:07.364Z,1513245427.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:07.728Z,1513245427.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:07.753Z,1513245427.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:08.119Z,1513245428.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:08.142Z,1513245428.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:08.530Z,1513245428.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:08.560Z,1513245428.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:08.930Z,1513245428.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:08.963Z,1513245428.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:09.346Z,1513245429.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:09.367Z,1513245429.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:09.721Z,1513245429.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:09.759Z,1513245429.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:10.126Z,1513245430.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:10.168Z,1513245430.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:10.554Z,1513245430.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:10.569Z,1513245430.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:10.933Z,1513245430.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:10.959Z,1513245430.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:11.334Z,1513245431.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:11.384Z,1513245431.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:11.720Z,1513245431.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:11.782Z,1513245431.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:12.120Z,1513245432.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:12.136Z,1513245432.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:12.538Z,1513245432.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:12.563Z,1513245432.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:12.941Z,1513245432.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:13.003Z,1513245433.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:13.337Z,1513245433.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:13.374Z,1513245433.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:13.755Z,1513245433.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:13.811Z,1513245433.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:14.120Z,1513245434.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:14.144Z,1513245434.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:14.527Z,1513245434.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:14.542Z,1513245434.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:14.937Z,1513245434.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:14.970Z,1513245434.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:15.330Z,1513245435.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:15.414Z,1513245435.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:15.723Z,1513245435.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:15.746Z,1513245435.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:16.128Z,1513245436.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:16.142Z,1513245436.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:16.535Z,1513245436.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:16.550Z,1513245436.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:16.938Z,1513245436.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:16.954Z,1513245436.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:17.335Z,1513245437.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:17.355Z,1513245437.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:17.731Z,1513245437.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:17.746Z,1513245437.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:18.125Z,1513245438.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:18.178Z,1513245438.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:18.533Z,1513245438.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:18.556Z,1513245438.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:18.939Z,1513245438.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:18.960Z,1513245438.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:19.326Z,1513245439.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:19.360Z,1513245439.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:19.730Z,1513245439.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:19.754Z,1513245439.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:20.115Z,1513245440.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:20.154Z,1513245440.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:20.526Z,1513245440.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:20.554Z,1513245440.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:20.941Z,1513245440.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:20.956Z,1513245440.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:21.328Z,1513245441.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:21.365Z,1513245441.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:21.751Z,1513245441.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:21.768Z,1513245441.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:22.119Z,1513245442.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:22.171Z,1513245442.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:22.525Z,1513245442.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:22.553Z,1513245442.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:22.939Z,1513245442.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:22.967Z,1513245442.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:23.352Z,1513245443.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:23.376Z,1513245443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:23.721Z,1513245443.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:23.755Z,1513245443.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:24.117Z,1513245444.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:24.132Z,1513245444.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:24.515Z,1513245444.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:24.535Z,1513245444.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:24.923Z,1513245444.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:24.938Z,1513245444.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:25.318Z,1513245445.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:25.332Z,1513245445.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:25.735Z,1513245445.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:25.766Z,1513245445.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:26.143Z,1513245446.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:26.204Z,1513245446.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:26.526Z,1513245446.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:26.540Z,1513245446.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:26.918Z,1513245446.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:26.941Z,1513245446.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:27.327Z,1513245447.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:27.342Z,1513245447.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:27.729Z,1513245447.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:27.744Z,1513245447.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:28.129Z,1513245448.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:28.151Z,1513245448.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:28.529Z,1513245448.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:28.545Z,1513245448.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:28.962Z,1513245448.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:28.977Z,1513245448.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:29.330Z,1513245449.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:29.344Z,1513245449.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:29.716Z,1513245449.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:29.755Z,1513245449.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:30.121Z,1513245450.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:30.152Z,1513245450.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:30.530Z,1513245450.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:30.563Z,1513245450.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:30.929Z,1513245450.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:30.964Z,1513245450.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:31.330Z,1513245451.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:31.356Z,1513245451.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:31.752Z,1513245451.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:31.771Z,1513245451.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:32.120Z,1513245452.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:32.134Z,1513245452.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:32.551Z,1513245452.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:32.575Z,1513245452.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:32.939Z,1513245452.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:32.963Z,1513245452.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:33.333Z,1513245453.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:33.367Z,1513245453.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:33.728Z,1513245453.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:33.743Z,1513245453.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:34.120Z,1513245454.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:34.195Z,1513245454.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:34.537Z,1513245454.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:34.569Z,1513245454.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:34.930Z,1513245454.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:34.979Z,1513245454.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:35.346Z,1513245455.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:35.375Z,1513245455.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:35.724Z,1513245455.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:35.764Z,1513245455.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:36.124Z,1513245456.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:36.139Z,1513245456.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:36.524Z,1513245456.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:36.543Z,1513245456.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:36.922Z,1513245456.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:36.946Z,1513245456.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:37.327Z,1513245457.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:37.347Z,1513245457.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:37.734Z,1513245457.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:37.748Z,1513245457.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:38.138Z,1513245458.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:38.152Z,1513245458.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:38.537Z,1513245458.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:38.552Z,1513245458.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:38.920Z,1513245458.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:38.985Z,1513245458.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:39.323Z,1513245459.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:39.340Z,1513245459.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:39.733Z,1513245459.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:39.884Z,1513245459.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:40.125Z,1513245460.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:40.140Z,1513245460.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:40.529Z,1513245460.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:40.544Z,1513245460.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:40.941Z,1513245460.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:40.972Z,1513245460.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:41.331Z,1513245461.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:41.351Z,1513245461.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:41.728Z,1513245461.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:41.743Z,1513245461.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:42.140Z,1513245462.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:42.180Z,1513245462.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:42.187Z,1513245462.187 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T09:57:42.188Z,1513245462.188 [Default:CheckIn:C.Wait] Stopped
2017-12-14T09:57:42.188Z,1513245462.188 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T09:57:42.188Z,1513245462.188 [Default:CheckIn:D] Running Loop=1
2017-12-14T09:57:42.532Z,1513245462.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:42.551Z,1513245462.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:42.554Z,1513245462.554 [Default:CheckIn:D] Stopped
2017-12-14T09:57:42.555Z,1513245462.555 [Default:CheckIn:E] Running Loop=1
2017-12-14T09:57:42.931Z,1513245462.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:42.969Z,1513245462.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:42.974Z,1513245462.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 564.452734 min 
2017-12-14T09:57:42.974Z,1513245462.974 [Default:CheckIn:E] Stopped
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn] Stopped
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn](INFO): Running loop #55
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn] Running Loop=55
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T09:57:42.975Z,1513245462.975 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T09:57:43.334Z,1513245463.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:43.357Z,1513245463.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:46.825Z,1513245466.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:46.887Z,1513245466.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:46.987Z,1513245466.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:47.033Z,1513245467.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:47.350Z,1513245467.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:47.382Z,1513245467.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:47.761Z,1513245467.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:47.787Z,1513245467.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:48.153Z,1513245468.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:48.184Z,1513245468.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:48.570Z,1513245468.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:48.609Z,1513245468.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:48.964Z,1513245468.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:48.979Z,1513245468.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:49.333Z,1513245469.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:49.372Z,1513245469.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:49.758Z,1513245469.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:49.782Z,1513245469.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:50.160Z,1513245470.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:50.176Z,1513245470.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:50.554Z,1513245470.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:50.575Z,1513245470.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:50.935Z,1513245470.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:50.967Z,1513245470.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:51.336Z,1513245471.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:51.362Z,1513245471.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:51.751Z,1513245471.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:51.766Z,1513245471.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:52.135Z,1513245472.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:52.161Z,1513245472.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:52.554Z,1513245472.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:52.570Z,1513245472.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:52.954Z,1513245472.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:52.974Z,1513245472.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:53.346Z,1513245473.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:53.376Z,1513245473.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:53.739Z,1513245473.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:53.772Z,1513245473.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:54.137Z,1513245474.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:54.190Z,1513245474.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:54.535Z,1513245474.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:54.568Z,1513245474.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:54.940Z,1513245474.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:55.012Z,1513245475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:55.346Z,1513245475.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:55.376Z,1513245475.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:55.762Z,1513245475.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:55.777Z,1513245475.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:56.153Z,1513245476.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:56.187Z,1513245476.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:56.569Z,1513245476.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:56.584Z,1513245476.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:56.945Z,1513245476.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:56.969Z,1513245476.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:57.344Z,1513245477.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:57.359Z,1513245477.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:57.744Z,1513245477.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:57.759Z,1513245477.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:58.157Z,1513245478.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:58.197Z,1513245478.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:58.566Z,1513245478.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:58.597Z,1513245478.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:58.955Z,1513245478.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:58.000Z,1513245479.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:59.355Z,1513245479.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:59.410Z,1513245479.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:57:59.735Z,1513245479.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:57:59.777Z,1513245479.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:00.139Z,1513245480.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:00.207Z,1513245480.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:00.541Z,1513245480.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:00.575Z,1513245480.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:00.942Z,1513245480.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:00.987Z,1513245480.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:01.351Z,1513245481.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:01.387Z,1513245481.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:01.758Z,1513245481.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:01.785Z,1513245481.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:02.161Z,1513245482.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:02.189Z,1513245482.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:02.549Z,1513245482.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:02.564Z,1513245482.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:02.945Z,1513245482.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:02.960Z,1513245482.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:03.345Z,1513245483.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:03.359Z,1513245483.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:03.745Z,1513245483.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:03.767Z,1513245483.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:04.143Z,1513245484.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:04.159Z,1513245484.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:04.569Z,1513245484.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:04.612Z,1513245484.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:04.949Z,1513245484.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:04.964Z,1513245484.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:05.357Z,1513245485.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:05.390Z,1513245485.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:05.745Z,1513245485.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:05.792Z,1513245485.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:06.136Z,1513245486.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:06.152Z,1513245486.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:06.541Z,1513245486.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:06.564Z,1513245486.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:06.942Z,1513245486.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:06.964Z,1513245486.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:07.347Z,1513245487.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:07.362Z,1513245487.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:07.775Z,1513245487.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:07.823Z,1513245487.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:08.150Z,1513245488.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:08.171Z,1513245488.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:08.548Z,1513245488.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:08.564Z,1513245488.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:08.938Z,1513245488.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:08.967Z,1513245488.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:09.344Z,1513245489.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:09.399Z,1513245489.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:09.743Z,1513245489.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:09.757Z,1513245489.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:10.149Z,1513245490.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:10.163Z,1513245490.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:10.549Z,1513245490.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:10.571Z,1513245490.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:10.966Z,1513245490.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:10.995Z,1513245490.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:11.352Z,1513245491.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:11.372Z,1513245491.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:11.745Z,1513245491.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:11.759Z,1513245491.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:12.148Z,1513245492.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:12.163Z,1513245492.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:12.553Z,1513245492.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:12.567Z,1513245492.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:12.949Z,1513245492.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:12.972Z,1513245492.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:13.335Z,1513245493.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:13.361Z,1513245493.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:13.753Z,1513245493.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:13.768Z,1513245493.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:14.206Z,1513245494.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:14.262Z,1513245494.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:14.551Z,1513245494.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:14.566Z,1513245494.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:14.949Z,1513245494.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:14.964Z,1513245494.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:15.335Z,1513245495.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:15.367Z,1513245495.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:15.748Z,1513245495.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:15.768Z,1513245495.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:16.157Z,1513245496.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:16.172Z,1513245496.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:16.559Z,1513245496.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:16.574Z,1513245496.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:16.959Z,1513245496.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:16.979Z,1513245496.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:17.369Z,1513245497.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:17.399Z,1513245497.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:17.735Z,1513245497.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:17.775Z,1513245497.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:18.135Z,1513245498.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:18.171Z,1513245498.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:18.542Z,1513245498.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:18.572Z,1513245498.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:18.948Z,1513245498.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:18.980Z,1513245498.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:19.336Z,1513245499.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:19.355Z,1513245499.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:19.750Z,1513245499.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:19.782Z,1513245499.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:20.149Z,1513245500.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:20.183Z,1513245500.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:20.556Z,1513245500.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:20.596Z,1513245500.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:20.935Z,1513245500.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:20.991Z,1513245500.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:21.339Z,1513245501.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:21.374Z,1513245501.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:21.741Z,1513245501.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:21.787Z,1513245501.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:22.141Z,1513245502.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:22.179Z,1513245502.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:22.573Z,1513245502.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:22.588Z,1513245502.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:22.954Z,1513245502.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:23.011Z,1513245503.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:23.357Z,1513245503.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:23.380Z,1513245503.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:23.758Z,1513245503.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:23.843Z,1513245503.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:24.148Z,1513245504.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:24.184Z,1513245504.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:24.542Z,1513245504.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:24.557Z,1513245504.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:24.938Z,1513245504.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:24.960Z,1513245504.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:25.338Z,1513245505.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:25.368Z,1513245505.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:25.754Z,1513245505.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:25.775Z,1513245505.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:26.159Z,1513245506.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:26.179Z,1513245506.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:26.554Z,1513245506.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:26.569Z,1513245506.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:26.950Z,1513245506.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:26.993Z,1513245506.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:27.335Z,1513245507.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:27.371Z,1513245507.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:27.740Z,1513245507.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:27.754Z,1513245507.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:28.135Z,1513245508.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:28.150Z,1513245508.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:28.554Z,1513245508.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:28.579Z,1513245508.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:28.953Z,1513245508.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:28.980Z,1513245508.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:29.353Z,1513245509.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:29.387Z,1513245509.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:29.742Z,1513245509.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:29.757Z,1513245509.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:30.160Z,1513245510.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:30.191Z,1513245510.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:30.550Z,1513245510.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:30.565Z,1513245510.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:30.946Z,1513245510.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:30.960Z,1513245510.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:31.340Z,1513245511.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:31.363Z,1513245511.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:31.757Z,1513245511.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:31.791Z,1513245511.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:32.148Z,1513245512.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:32.199Z,1513245512.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:32.548Z,1513245512.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:32.567Z,1513245512.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:32.948Z,1513245512.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:32.963Z,1513245512.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:33.346Z,1513245513.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:33.361Z,1513245513.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:33.749Z,1513245513.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:33.765Z,1513245513.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:34.145Z,1513245514.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:34.159Z,1513245514.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:34.552Z,1513245514.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:34.567Z,1513245514.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:34.951Z,1513245514.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:34.971Z,1513245514.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:35.350Z,1513245515.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:35.365Z,1513245515.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:35.739Z,1513245515.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:35.755Z,1513245515.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:36.139Z,1513245516.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:36.173Z,1513245516.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:36.543Z,1513245516.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:36.626Z,1513245516.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:36.947Z,1513245516.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:36.962Z,1513245516.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:37.350Z,1513245517.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:37.366Z,1513245517.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:37.753Z,1513245517.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:37.775Z,1513245517.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:38.154Z,1513245518.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:38.169Z,1513245518.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:38.551Z,1513245518.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:38.580Z,1513245518.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:38.943Z,1513245518.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:38.958Z,1513245518.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:39.343Z,1513245519.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:39.369Z,1513245519.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:39.802Z,1513245519.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:39.824Z,1513245519.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:40.142Z,1513245520.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:40.163Z,1513245520.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:40.556Z,1513245520.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:40.579Z,1513245520.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:40.953Z,1513245520.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:40.981Z,1513245520.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:41.357Z,1513245521.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:41.372Z,1513245521.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:41.735Z,1513245521.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:41.767Z,1513245521.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:42.150Z,1513245522.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:42.165Z,1513245522.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:42.535Z,1513245522.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:42.567Z,1513245522.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:42.936Z,1513245522.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:43.019Z,1513245523.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:43.348Z,1513245523.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:43.363Z,1513245523.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:46.862Z,1513245526.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:46.959Z,1513245526.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:47.062Z,1513245527.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:47.104Z,1513245527.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:47.442Z,1513245527.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:47.459Z,1513245527.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:47.836Z,1513245527.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:47.894Z,1513245527.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:48.219Z,1513245528.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:48.234Z,1513245528.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:48.629Z,1513245528.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:48.679Z,1513245528.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:49.018Z,1513245529.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:49.033Z,1513245529.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:49.438Z,1513245529.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:49.473Z,1513245529.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:49.837Z,1513245529.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:49.875Z,1513245529.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:50.237Z,1513245530.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:50.267Z,1513245530.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:50.646Z,1513245530.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:50.671Z,1513245530.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:51.035Z,1513245531.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:51.077Z,1513245531.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:51.424Z,1513245531.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:51.439Z,1513245531.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:51.828Z,1513245531.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:51.848Z,1513245531.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:52.230Z,1513245532.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:52.244Z,1513245532.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:52.633Z,1513245532.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:52.648Z,1513245532.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:53.034Z,1513245533.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:53.048Z,1513245533.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:53.446Z,1513245533.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:53.460Z,1513245533.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:53.813Z,1513245533.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:53.851Z,1513245533.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:54.227Z,1513245534.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:54.244Z,1513245534.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:54.628Z,1513245534.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:54.647Z,1513245534.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:55.029Z,1513245535.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:55.044Z,1513245535.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:55.428Z,1513245535.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:55.447Z,1513245535.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:55.841Z,1513245535.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:55.856Z,1513245535.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:56.239Z,1513245536.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:56.253Z,1513245536.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:56.642Z,1513245536.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:56.663Z,1513245536.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:57.031Z,1513245537.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:57.090Z,1513245537.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:57.423Z,1513245537.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:57.438Z,1513245537.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:57.826Z,1513245537.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:57.841Z,1513245537.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:58.224Z,1513245538.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:58.258Z,1513245538.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:58.638Z,1513245538.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:58.668Z,1513245538.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:59.042Z,1513245539.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:59.057Z,1513245539.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:59.438Z,1513245539.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:59.452Z,1513245539.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:58:59.819Z,1513245539.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:58:59.845Z,1513245539.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:00.223Z,1513245540.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:00.249Z,1513245540.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:00.624Z,1513245540.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:00.650Z,1513245540.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:01.019Z,1513245541.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:01.056Z,1513245541.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:01.419Z,1513245541.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:01.444Z,1513245541.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:01.837Z,1513245541.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:01.895Z,1513245541.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:02.243Z,1513245542.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:02.258Z,1513245542.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:02.643Z,1513245542.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:02.658Z,1513245542.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:03.024Z,1513245543.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:03.043Z,1513245543.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:03.426Z,1513245543.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:03.443Z,1513245543.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:03.829Z,1513245543.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:03.852Z,1513245543.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:04.229Z,1513245544.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:04.244Z,1513245544.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:04.650Z,1513245544.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:04.675Z,1513245544.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:05.034Z,1513245545.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:05.097Z,1513245545.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:05.433Z,1513245545.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:05.448Z,1513245545.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:05.828Z,1513245545.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:05.843Z,1513245545.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:06.227Z,1513245546.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:06.243Z,1513245546.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:06.628Z,1513245546.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:06.643Z,1513245546.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:07.031Z,1513245547.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:07.051Z,1513245547.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:07.431Z,1513245547.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:07.446Z,1513245547.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:07.832Z,1513245547.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:07.855Z,1513245547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:08.270Z,1513245548.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:08.328Z,1513245548.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:08.634Z,1513245548.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:08.682Z,1513245548.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:09.019Z,1513245549.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:09.107Z,1513245549.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:09.427Z,1513245549.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:09.465Z,1513245549.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:09.828Z,1513245549.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:09.875Z,1513245549.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:10.220Z,1513245550.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:10.240Z,1513245550.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:10.629Z,1513245550.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:10.671Z,1513245550.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:11.046Z,1513245551.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:11.071Z,1513245551.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:11.430Z,1513245551.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:11.444Z,1513245551.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:11.828Z,1513245551.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:11.847Z,1513245551.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:12.228Z,1513245552.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:12.243Z,1513245552.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:12.273Z,1513245552.273 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T09:59:12.626Z,1513245552.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:12.642Z,1513245552.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:13.027Z,1513245553.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:13.047Z,1513245553.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:13.426Z,1513245553.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:13.451Z,1513245553.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:13.834Z,1513245553.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:13.849Z,1513245553.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:14.234Z,1513245554.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:14.248Z,1513245554.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:14.688Z,1513245554.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:14.731Z,1513245554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:15.027Z,1513245555.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:15.060Z,1513245555.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:15.432Z,1513245555.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:15.447Z,1513245555.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:15.832Z,1513245555.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:15.847Z,1513245555.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:16.236Z,1513245556.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:16.255Z,1513245556.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:16.643Z,1513245556.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:16.657Z,1513245556.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:17.040Z,1513245557.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:17.067Z,1513245557.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:17.441Z,1513245557.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:17.456Z,1513245557.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:17.819Z,1513245557.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:17.904Z,1513245557.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:18.230Z,1513245558.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:18.245Z,1513245558.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:18.625Z,1513245558.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:18.647Z,1513245558.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:19.038Z,1513245559.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:19.089Z,1513245559.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:19.429Z,1513245559.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:19.444Z,1513245559.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:19.839Z,1513245559.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:19.859Z,1513245559.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:20.243Z,1513245560.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:20.258Z,1513245560.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:20.646Z,1513245560.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:20.661Z,1513245560.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:21.059Z,1513245561.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:21.106Z,1513245561.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:21.419Z,1513245561.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:21.458Z,1513245561.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:21.823Z,1513245561.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:21.856Z,1513245561.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:22.219Z,1513245562.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:22.260Z,1513245562.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:22.634Z,1513245562.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:22.655Z,1513245562.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:23.052Z,1513245563.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:23.069Z,1513245563.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:23.449Z,1513245563.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:23.467Z,1513245563.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:23.819Z,1513245563.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:23.866Z,1513245563.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:24.235Z,1513245564.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:24.276Z,1513245564.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:24.635Z,1513245564.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:24.679Z,1513245564.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:25.022Z,1513245565.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:25.054Z,1513245565.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:25.419Z,1513245565.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:25.451Z,1513245565.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:25.834Z,1513245565.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:25.849Z,1513245565.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:26.237Z,1513245566.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:26.259Z,1513245566.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:26.638Z,1513245566.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:26.653Z,1513245566.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:27.019Z,1513245567.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:27.056Z,1513245567.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:27.442Z,1513245567.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:27.489Z,1513245567.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:27.830Z,1513245567.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:27.845Z,1513245567.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:28.225Z,1513245568.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:28.247Z,1513245568.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:28.634Z,1513245568.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:28.655Z,1513245568.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:29.034Z,1513245569.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:29.055Z,1513245569.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:29.436Z,1513245569.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:29.452Z,1513245569.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:29.828Z,1513245569.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:29.842Z,1513245569.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:30.228Z,1513245570.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:30.247Z,1513245570.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:30.643Z,1513245570.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:30.696Z,1513245570.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:31.042Z,1513245571.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:31.133Z,1513245571.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:31.416Z,1513245571.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:31.441Z,1513245571.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:31.843Z,1513245571.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:31.907Z,1513245571.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:32.243Z,1513245572.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:32.258Z,1513245572.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:32.630Z,1513245572.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:32.698Z,1513245572.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:33.023Z,1513245573.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:33.123Z,1513245573.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:33.417Z,1513245573.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:33.432Z,1513245573.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:33.824Z,1513245573.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:33.907Z,1513245573.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:34.245Z,1513245574.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:34.261Z,1513245574.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:34.629Z,1513245574.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:34.658Z,1513245574.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:34.659Z,1513245574.659 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189
2017-12-14T09:59:34.659Z,1513245574.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T09:59:34.660Z,1513245574.660 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:34.660Z,1513245574.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 189
2017-12-14T09:59:34.661Z,1513245574.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T09:59:34.662Z,1513245574.662 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:34.663Z,1513245574.663 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189
2017-12-14T09:59:34.663Z,1513245574.663 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T09:59:34.675Z,1513245574.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T09:59:34.676Z,1513245574.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T09:59:34.676Z,1513245574.676 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T09:59:35.037Z,1513245575.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:35.083Z,1513245575.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T09:59:35.083Z,1513245575.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189
2017-12-14T09:59:35.084Z,1513245575.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T09:59:35.084Z,1513245575.084 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 189
2017-12-14T09:59:35.084Z,1513245575.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T09:59:35.084Z,1513245575.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189
2017-12-14T09:59:35.437Z,1513245575.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:35.470Z,1513245575.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T09:59:35.470Z,1513245575.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:59:35.471Z,1513245575.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:59:35.471Z,1513245575.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T09:59:35.471Z,1513245575.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:59:35.472Z,1513245575.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:59:35.472Z,1513245575.472 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T09:59:35.473Z,1513245575.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T09:59:35.473Z,1513245575.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T09:59:35.828Z,1513245575.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:35.842Z,1513245575.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:36.220Z,1513245576.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:36.235Z,1513245576.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:36.627Z,1513245576.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:36.669Z,1513245576.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:37.028Z,1513245577.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:37.042Z,1513245577.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:37.427Z,1513245577.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:37.447Z,1513245577.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:37.837Z,1513245577.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:37.852Z,1513245577.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:38.237Z,1513245578.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:38.251Z,1513245578.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:38.639Z,1513245578.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:38.675Z,1513245578.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:39.019Z,1513245579.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:39.052Z,1513245579.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:39.419Z,1513245579.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:39.447Z,1513245579.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:39.819Z,1513245579.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:39.855Z,1513245579.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:40.229Z,1513245580.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:40.271Z,1513245580.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:40.633Z,1513245580.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:40.657Z,1513245580.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:41.045Z,1513245581.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:41.095Z,1513245581.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:41.441Z,1513245581.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:41.473Z,1513245581.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:41.829Z,1513245581.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:41.843Z,1513245581.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:42.228Z,1513245582.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:42.281Z,1513245582.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:42.627Z,1513245582.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:42.647Z,1513245582.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:43.029Z,1513245583.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:43.043Z,1513245583.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:43.424Z,1513245583.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:43.487Z,1513245583.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:46.972Z,1513245586.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:46.987Z,1513245586.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:47.106Z,1513245587.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:47.136Z,1513245587.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:47.457Z,1513245587.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:47.491Z,1513245587.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:47.848Z,1513245587.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:47.862Z,1513245587.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:48.235Z,1513245588.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:48.253Z,1513245588.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:48.646Z,1513245588.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:48.660Z,1513245588.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:49.040Z,1513245589.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:49.066Z,1513245589.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:49.442Z,1513245589.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:49.467Z,1513245589.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:49.894Z,1513245589.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:49.918Z,1513245589.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:50.250Z,1513245590.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:50.289Z,1513245590.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:50.648Z,1513245590.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:50.668Z,1513245590.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:51.043Z,1513245591.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:51.058Z,1513245591.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:51.445Z,1513245591.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:51.459Z,1513245591.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:51.850Z,1513245591.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:51.866Z,1513245591.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:52.249Z,1513245592.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:52.268Z,1513245592.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:52.654Z,1513245592.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:52.669Z,1513245592.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:53.063Z,1513245593.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:53.088Z,1513245593.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:53.445Z,1513245593.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:53.527Z,1513245593.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:53.843Z,1513245593.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:53.874Z,1513245593.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:54.236Z,1513245594.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:54.259Z,1513245594.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:54.644Z,1513245594.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:54.687Z,1513245594.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:55.047Z,1513245595.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:55.063Z,1513245595.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:55.436Z,1513245595.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:55.451Z,1513245595.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:55.850Z,1513245595.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:55.864Z,1513245595.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:56.250Z,1513245596.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:56.289Z,1513245596.289 [BPC1](ERROR): Failed to receive battery data
2017-12-14T09:59:56.289Z,1513245596.289 [BPC1] Communications Fault, FailCount= 1
2017-12-14T09:59:56.289Z,1513245596.289 [BPC1](ERROR): Communications Fault
2017-12-14T09:59:56.338Z,1513245596.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:56.445Z,1513245596.445 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T09:59:56.650Z,1513245596.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:56.664Z,1513245596.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:57.040Z,1513245597.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:57.067Z,1513245597.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:57.445Z,1513245597.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:57.460Z,1513245597.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:57.485Z,1513245597.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T09:59:57.485Z,1513245597.485 [BPC1] No Fault, FailCount= 1
2017-12-14T09:59:57.842Z,1513245597.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:57.935Z,1513245597.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:58.247Z,1513245598.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:58.262Z,1513245598.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:58.653Z,1513245598.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:58.668Z,1513245598.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:59.050Z,1513245599.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:59.064Z,1513245599.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:59.450Z,1513245599.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:59.465Z,1513245599.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T09:59:59.836Z,1513245599.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T09:59:59.880Z,1513245599.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:00.248Z,1513245600.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:00.287Z,1513245600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:00.652Z,1513245600.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:00.678Z,1513245600.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:01.041Z,1513245601.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:01.056Z,1513245601.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:01.443Z,1513245601.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:01.460Z,1513245601.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:01.852Z,1513245601.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:01.868Z,1513245601.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:02.257Z,1513245602.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:02.272Z,1513245602.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:02.665Z,1513245602.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:02.705Z,1513245602.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:03.044Z,1513245603.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:03.064Z,1513245603.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:03.447Z,1513245603.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:03.461Z,1513245603.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:03.842Z,1513245603.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:03.862Z,1513245603.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:04.245Z,1513245604.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:04.260Z,1513245604.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:04.653Z,1513245604.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:04.674Z,1513245604.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:05.052Z,1513245605.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:05.069Z,1513245605.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:05.453Z,1513245605.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:05.472Z,1513245605.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:05.875Z,1513245605.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:05.949Z,1513245605.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:06.243Z,1513245606.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:06.304Z,1513245606.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:06.652Z,1513245606.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:06.671Z,1513245606.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:07.042Z,1513245607.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:07.065Z,1513245607.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:07.440Z,1513245607.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:07.456Z,1513245607.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:07.853Z,1513245607.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:07.897Z,1513245607.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:08.253Z,1513245608.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:08.284Z,1513245608.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:08.645Z,1513245608.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:08.660Z,1513245608.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:09.069Z,1513245609.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:09.119Z,1513245609.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:09.435Z,1513245609.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:09.476Z,1513245609.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:09.835Z,1513245609.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:09.860Z,1513245609.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:10.235Z,1513245610.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:10.271Z,1513245610.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:10.666Z,1513245610.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:10.687Z,1513245610.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:11.054Z,1513245611.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:11.088Z,1513245611.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:11.460Z,1513245611.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:11.474Z,1513245611.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:11.835Z,1513245611.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:11.867Z,1513245611.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:12.230Z,1513245612.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:12.278Z,1513245612.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:12.645Z,1513245612.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:12.659Z,1513245612.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:13.050Z,1513245613.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:13.065Z,1513245613.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:13.447Z,1513245613.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:13.467Z,1513245613.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:13.853Z,1513245613.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:13.868Z,1513245613.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:14.253Z,1513245614.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:14.272Z,1513245614.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:14.652Z,1513245614.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:14.667Z,1513245614.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:15.048Z,1513245615.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:15.063Z,1513245615.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:15.451Z,1513245615.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:15.471Z,1513245615.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:15.859Z,1513245615.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:15.881Z,1513245615.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:16.238Z,1513245616.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:16.271Z,1513245616.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:16.658Z,1513245616.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:16.674Z,1513245616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:17.058Z,1513245617.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:17.118Z,1513245617.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:17.444Z,1513245617.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:17.476Z,1513245617.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:17.839Z,1513245617.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:17.866Z,1513245617.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:18.236Z,1513245618.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:18.290Z,1513245618.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:18.658Z,1513245618.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:18.715Z,1513245618.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:19.036Z,1513245619.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:19.091Z,1513245619.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:19.432Z,1513245619.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:19.463Z,1513245619.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:19.859Z,1513245619.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:19.874Z,1513245619.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:20.263Z,1513245620.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:20.284Z,1513245620.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:20.647Z,1513245620.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:20.686Z,1513245620.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:21.039Z,1513245621.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:21.060Z,1513245621.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:21.439Z,1513245621.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:21.461Z,1513245621.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:21.862Z,1513245621.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:21.908Z,1513245621.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:22.319Z,1513245622.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:22.333Z,1513245622.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:22.655Z,1513245622.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:22.729Z,1513245622.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:23.058Z,1513245623.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:23.074Z,1513245623.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:23.444Z,1513245623.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:23.475Z,1513245623.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:23.839Z,1513245623.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:23.865Z,1513245623.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:24.232Z,1513245624.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:24.266Z,1513245624.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:24.635Z,1513245624.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:24.670Z,1513245624.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:25.056Z,1513245625.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:25.095Z,1513245625.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:25.436Z,1513245625.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:25.478Z,1513245625.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:25.850Z,1513245625.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:25.876Z,1513245625.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:26.253Z,1513245626.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:26.290Z,1513245626.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:26.646Z,1513245626.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:26.668Z,1513245626.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:27.041Z,1513245627.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:27.056Z,1513245627.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:27.443Z,1513245627.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:27.510Z,1513245627.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:27.838Z,1513245627.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:27.855Z,1513245627.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:28.283Z,1513245628.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:28.333Z,1513245628.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:28.674Z,1513245628.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:28.691Z,1513245628.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:29.070Z,1513245629.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:29.119Z,1513245629.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:29.458Z,1513245629.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:29.473Z,1513245629.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:29.841Z,1513245629.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:29.872Z,1513245629.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:30.240Z,1513245630.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:30.282Z,1513245630.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:30.640Z,1513245630.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:30.682Z,1513245630.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:31.044Z,1513245631.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:31.086Z,1513245631.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:31.443Z,1513245631.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:31.487Z,1513245631.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:31.849Z,1513245631.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:31.893Z,1513245631.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:32.261Z,1513245632.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:32.292Z,1513245632.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:32.648Z,1513245632.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:32.664Z,1513245632.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:33.038Z,1513245633.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:33.080Z,1513245633.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:33.435Z,1513245633.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:33.468Z,1513245633.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:33.836Z,1513245633.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:33.871Z,1513245633.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:34.253Z,1513245634.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:34.267Z,1513245634.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:34.692Z,1513245634.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:34.784Z,1513245634.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:35.084Z,1513245635.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:35.105Z,1513245635.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:35.455Z,1513245635.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:35.487Z,1513245635.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:35.836Z,1513245635.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:35.872Z,1513245635.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:36.240Z,1513245636.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:36.275Z,1513245636.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:36.639Z,1513245636.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:36.680Z,1513245636.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:37.042Z,1513245637.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:37.072Z,1513245637.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:37.445Z,1513245637.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:37.460Z,1513245637.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:37.849Z,1513245637.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:37.864Z,1513245637.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:38.261Z,1513245638.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:38.319Z,1513245638.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:38.658Z,1513245638.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:38.678Z,1513245638.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:39.035Z,1513245639.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:39.071Z,1513245639.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:39.435Z,1513245639.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:39.501Z,1513245639.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:39.839Z,1513245639.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:39.879Z,1513245639.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:40.238Z,1513245640.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:40.265Z,1513245640.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:40.660Z,1513245640.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:40.715Z,1513245640.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:41.069Z,1513245641.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:41.111Z,1513245641.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:41.446Z,1513245641.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:41.503Z,1513245641.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:41.838Z,1513245641.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:41.852Z,1513245641.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:42.243Z,1513245642.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:42.283Z,1513245642.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:42.647Z,1513245642.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:42.690Z,1513245642.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:43.042Z,1513245643.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:43.090Z,1513245643.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:43.440Z,1513245643.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:43.484Z,1513245643.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:47.158Z,1513245647.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:47.184Z,1513245647.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:47.289Z,1513245647.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:47.326Z,1513245647.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:47.668Z,1513245647.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:47.691Z,1513245647.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:48.045Z,1513245648.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:48.060Z,1513245648.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:48.440Z,1513245648.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:48.456Z,1513245648.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:48.841Z,1513245648.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:48.863Z,1513245648.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:49.244Z,1513245649.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:49.259Z,1513245649.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:49.646Z,1513245649.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:49.691Z,1513245649.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:49.950Z,1513245649.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:50.057Z,1513245650.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:50.088Z,1513245650.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:50.447Z,1513245650.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:50.466Z,1513245650.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:50.748Z,1513245650.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:50.857Z,1513245650.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:50.906Z,1513245650.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:51.165Z,1513245651.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:51.244Z,1513245651.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:51.259Z,1513245651.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:51.647Z,1513245651.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:51.662Z,1513245651.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:51.961Z,1513245651.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:52.034Z,1513245652.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:52.062Z,1513245652.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:52.463Z,1513245652.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:52.479Z,1513245652.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:52.757Z,1513245652.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:52.857Z,1513245652.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:52.872Z,1513245652.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:53.161Z,1513245653.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:53.257Z,1513245653.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:53.272Z,1513245653.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:53.634Z,1513245653.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:53.661Z,1513245653.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:54.034Z,1513245654.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:54.067Z,1513245654.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:54.467Z,1513245654.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:54.482Z,1513245654.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:54.856Z,1513245654.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:54.871Z,1513245654.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:55.255Z,1513245655.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:55.271Z,1513245655.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:55.656Z,1513245655.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:55.671Z,1513245655.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:56.031Z,1513245656.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:56.058Z,1513245656.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:56.463Z,1513245656.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:56.486Z,1513245656.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:56.834Z,1513245656.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:56.857Z,1513245656.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:57.233Z,1513245657.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:57.272Z,1513245657.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:57.652Z,1513245657.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:57.667Z,1513245657.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:58.056Z,1513245658.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:58.071Z,1513245658.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:58.492Z,1513245658.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:58.515Z,1513245658.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:58.836Z,1513245658.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:58.864Z,1513245658.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:59.239Z,1513245659.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:59.264Z,1513245659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:00:59.639Z,1513245659.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:00:59.671Z,1513245659.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:00.034Z,1513245660.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:00.060Z,1513245660.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:00.506Z,1513245660.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:00.571Z,1513245660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:00.854Z,1513245660.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:00.869Z,1513245660.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:01.253Z,1513245661.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:01.268Z,1513245661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:01.654Z,1513245661.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:01.669Z,1513245661.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:02.041Z,1513245662.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:02.076Z,1513245662.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:02.430Z,1513245662.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:02.466Z,1513245662.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:02.844Z,1513245662.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:02.899Z,1513245662.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:03.254Z,1513245663.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:03.279Z,1513245663.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:03.651Z,1513245663.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:03.721Z,1513245663.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:03.953Z,1513245663.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:04.056Z,1513245664.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:04.071Z,1513245664.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:04.458Z,1513245664.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:04.472Z,1513245664.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:04.751Z,1513245664.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:04.832Z,1513245664.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:04.860Z,1513245664.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:05.161Z,1513245665.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:05.231Z,1513245665.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:05.267Z,1513245665.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:05.631Z,1513245665.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:05.655Z,1513245665.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:05.957Z,1513245665.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:06.036Z,1513245666.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:06.061Z,1513245666.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:06.465Z,1513245666.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:06.481Z,1513245666.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:06.753Z,1513245666.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:06.871Z,1513245666.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:06.903Z,1513245666.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:07.157Z,1513245667.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:07.246Z,1513245667.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:07.270Z,1513245667.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:07.647Z,1513245667.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:07.673Z,1513245667.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:08.031Z,1513245668.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:08.074Z,1513245668.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:08.457Z,1513245668.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:08.486Z,1513245668.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:08.836Z,1513245668.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:08.855Z,1513245668.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:09.241Z,1513245669.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:09.255Z,1513245669.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:09.649Z,1513245669.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:09.664Z,1513245669.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:10.057Z,1513245670.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:10.092Z,1513245670.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:10.478Z,1513245670.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:10.492Z,1513245670.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:10.836Z,1513245670.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:10.859Z,1513245670.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:11.244Z,1513245671.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:11.263Z,1513245671.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:11.643Z,1513245671.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:11.657Z,1513245671.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:12.046Z,1513245672.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:12.088Z,1513245672.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:12.454Z,1513245672.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:12.494Z,1513245672.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:12.846Z,1513245672.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:12.870Z,1513245672.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:13.266Z,1513245673.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:13.318Z,1513245673.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:13.650Z,1513245673.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:13.664Z,1513245673.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:14.040Z,1513245674.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:14.055Z,1513245674.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:14.494Z,1513245674.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:14.531Z,1513245674.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:14.844Z,1513245674.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:14.860Z,1513245674.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:15.240Z,1513245675.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:15.263Z,1513245675.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:15.654Z,1513245675.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:15.669Z,1513245675.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:16.059Z,1513245676.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:16.079Z,1513245676.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:16.464Z,1513245676.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:16.506Z,1513245676.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:16.831Z,1513245676.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:16.872Z,1513245676.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:17.258Z,1513245677.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:17.282Z,1513245677.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:17.633Z,1513245677.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:17.683Z,1513245677.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:17.938Z,1513245677.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:18.034Z,1513245678.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:18.086Z,1513245678.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:18.459Z,1513245678.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:18.478Z,1513245678.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:18.735Z,1513245678.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:18.844Z,1513245678.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:18.927Z,1513245678.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:19.174Z,1513245679.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:19.256Z,1513245679.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:19.284Z,1513245679.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:19.652Z,1513245679.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:19.703Z,1513245679.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:19.970Z,1513245679.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:20.041Z,1513245680.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:20.114Z,1513245680.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:20.489Z,1513245680.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:20.523Z,1513245680.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:20.766Z,1513245680.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:20.844Z,1513245680.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:20.872Z,1513245680.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:21.170Z,1513245681.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:21.243Z,1513245681.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:21.267Z,1513245681.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:21.659Z,1513245681.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:21.700Z,1513245681.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:22.055Z,1513245682.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:22.107Z,1513245682.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:22.476Z,1513245682.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:22.594Z,1513245682.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:22.841Z,1513245682.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:22.881Z,1513245682.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:23.256Z,1513245683.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:23.320Z,1513245683.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:23.633Z,1513245683.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:23.653Z,1513245683.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:24.042Z,1513245684.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:24.137Z,1513245684.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:24.472Z,1513245684.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:24.516Z,1513245684.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:24.854Z,1513245684.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:24.888Z,1513245684.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:25.276Z,1513245685.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:25.320Z,1513245685.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:25.653Z,1513245685.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:25.667Z,1513245685.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:26.059Z,1513245686.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:26.108Z,1513245686.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:26.475Z,1513245686.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:26.515Z,1513245686.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:26.832Z,1513245686.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:26.857Z,1513245686.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:27.231Z,1513245687.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:27.258Z,1513245687.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:27.655Z,1513245687.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:27.670Z,1513245687.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:28.065Z,1513245688.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:28.080Z,1513245688.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:28.520Z,1513245688.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:28.536Z,1513245688.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:28.831Z,1513245688.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:28.895Z,1513245688.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:29.234Z,1513245689.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:29.276Z,1513245689.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:29.632Z,1513245689.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:29.679Z,1513245689.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:30.042Z,1513245690.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:30.097Z,1513245690.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:30.440Z,1513245690.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:30.500Z,1513245690.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:30.849Z,1513245690.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:30.913Z,1513245690.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:31.261Z,1513245691.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:31.313Z,1513245691.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:31.651Z,1513245691.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:31.716Z,1513245691.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:31.962Z,1513245691.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:32.033Z,1513245692.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:32.068Z,1513245692.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:32.432Z,1513245692.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:32.504Z,1513245692.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:32.759Z,1513245692.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:32.865Z,1513245692.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:32.888Z,1513245692.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:33.166Z,1513245693.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:33.247Z,1513245693.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:33.276Z,1513245693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:33.651Z,1513245693.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:33.706Z,1513245693.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:33.963Z,1513245693.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:34.047Z,1513245694.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:34.085Z,1513245694.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:34.469Z,1513245694.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:34.539Z,1513245694.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:34.758Z,1513245694.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:34.857Z,1513245694.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:34.893Z,1513245694.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:35.161Z,1513245695.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:35.242Z,1513245695.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:35.291Z,1513245695.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:35.654Z,1513245695.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:35.700Z,1513245695.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:36.044Z,1513245696.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:36.071Z,1513245696.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:36.490Z,1513245696.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:36.554Z,1513245696.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:36.868Z,1513245696.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:36.895Z,1513245696.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:37.268Z,1513245697.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:37.296Z,1513245697.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:37.655Z,1513245697.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:37.699Z,1513245697.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:38.046Z,1513245698.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:38.070Z,1513245698.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:38.448Z,1513245698.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:38.492Z,1513245698.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:38.854Z,1513245698.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:38.884Z,1513245698.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:39.250Z,1513245699.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:39.286Z,1513245699.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:39.651Z,1513245699.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:39.698Z,1513245699.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:40.052Z,1513245700.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:40.091Z,1513245700.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:40.474Z,1513245700.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:40.499Z,1513245700.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:40.854Z,1513245700.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:40.902Z,1513245700.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:41.244Z,1513245701.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:41.309Z,1513245701.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:41.651Z,1513245701.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:41.671Z,1513245701.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:42.041Z,1513245702.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:42.091Z,1513245702.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:42.499Z,1513245702.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:42.538Z,1513245702.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:42.854Z,1513245702.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:42.883Z,1513245702.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:43.249Z,1513245703.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:43.264Z,1513245703.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:43.651Z,1513245703.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:43.685Z,1513245703.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:45.950Z,1513245705.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:46.749Z,1513245706.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:47.156Z,1513245707.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:47.161Z,1513245707.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:47.207Z,1513245707.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:47.305Z,1513245707.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:47.341Z,1513245707.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:47.714Z,1513245707.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:47.739Z,1513245707.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:47.957Z,1513245707.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:48.129Z,1513245708.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:48.144Z,1513245708.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:48.510Z,1513245708.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:48.543Z,1513245708.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:48.753Z,1513245708.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:48.901Z,1513245708.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:48.929Z,1513245708.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:49.157Z,1513245709.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:49.329Z,1513245709.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:49.356Z,1513245709.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:49.706Z,1513245709.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:49.714Z,1513245709.714 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:01:49.714Z,1513245709.714 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:01:49.714Z,1513245709.714 [BPC1](ERROR): Communications Fault
2017-12-14T10:01:49.723Z,1513245709.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:49.760Z,1513245709.760 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:01:50.103Z,1513245710.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:50.118Z,1513245710.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:50.509Z,1513245710.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:50.525Z,1513245710.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:50.918Z,1513245710.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:50.932Z,1513245710.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:50.975Z,1513245710.975 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:01:50.975Z,1513245710.975 [BPC1] No Fault, FailCount= 1
2017-12-14T10:01:51.310Z,1513245711.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:51.408Z,1513245711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:51.707Z,1513245711.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:51.722Z,1513245711.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:52.108Z,1513245712.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:52.123Z,1513245712.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:52.504Z,1513245712.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:52.533Z,1513245712.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:52.917Z,1513245712.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:52.933Z,1513245712.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:53.303Z,1513245713.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:53.318Z,1513245713.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:53.715Z,1513245713.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:53.735Z,1513245713.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:54.121Z,1513245714.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:54.135Z,1513245714.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:54.515Z,1513245714.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:54.530Z,1513245714.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:54.903Z,1513245714.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:55.010Z,1513245715.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:55.304Z,1513245715.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:55.318Z,1513245715.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:55.743Z,1513245715.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:55.758Z,1513245715.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:56.095Z,1513245716.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:56.115Z,1513245716.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:56.521Z,1513245716.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:56.536Z,1513245716.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:56.914Z,1513245716.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:56.928Z,1513245716.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:57.311Z,1513245717.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:57.325Z,1513245717.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:57.699Z,1513245717.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:57.713Z,1513245717.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:58.096Z,1513245718.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:58.115Z,1513245718.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:58.492Z,1513245718.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:58.508Z,1513245718.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:58.898Z,1513245718.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:58.921Z,1513245718.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:59.293Z,1513245719.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:59.308Z,1513245719.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:01:59.710Z,1513245719.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:01:59.759Z,1513245719.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:00.109Z,1513245720.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:00.125Z,1513245720.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:00.501Z,1513245720.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:00.516Z,1513245720.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:00.895Z,1513245720.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:00.915Z,1513245720.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:01.299Z,1513245721.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:01.313Z,1513245721.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:01.698Z,1513245721.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:01.719Z,1513245721.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:02.096Z,1513245722.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:02.125Z,1513245722.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:02.509Z,1513245722.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:02.524Z,1513245722.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:02.910Z,1513245722.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:02.938Z,1513245722.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:03.309Z,1513245723.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:03.324Z,1513245723.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:03.693Z,1513245723.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:03.708Z,1513245723.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:04.096Z,1513245724.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:04.115Z,1513245724.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:04.495Z,1513245724.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:04.512Z,1513245724.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:04.898Z,1513245724.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:04.913Z,1513245724.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:05.296Z,1513245725.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:05.311Z,1513245725.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:05.682Z,1513245725.682 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:02:05.682Z,1513245725.682 [NAL9602] Data Fault, FailCount= 2
2017-12-14T10:02:05.682Z,1513245725.682 [NAL9602](ERROR): Data Fault
2017-12-14T10:02:05.699Z,1513245725.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:05.714Z,1513245725.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:05.728Z,1513245725.728 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:02:06.080Z,1513245726.080 [NAL9602](INFO): Powering down
2017-12-14T10:02:06.097Z,1513245726.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:06.119Z,1513245726.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:06.499Z,1513245726.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:06.519Z,1513245726.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:06.897Z,1513245726.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:06.915Z,1513245726.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:06.928Z,1513245726.928 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:02:06.928Z,1513245726.928 [NAL9602] No Fault, FailCount= 2
2017-12-14T10:02:07.297Z,1513245727.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:07.311Z,1513245727.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:07.697Z,1513245727.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:07.712Z,1513245727.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:08.096Z,1513245728.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:08.111Z,1513245728.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:08.494Z,1513245728.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:08.510Z,1513245728.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:08.898Z,1513245728.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:08.914Z,1513245728.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:09.292Z,1513245729.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:09.308Z,1513245729.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:09.696Z,1513245729.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:09.712Z,1513245729.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:10.096Z,1513245730.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:10.111Z,1513245730.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:10.509Z,1513245730.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:10.571Z,1513245730.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:10.897Z,1513245730.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:10.943Z,1513245730.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:11.293Z,1513245731.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:11.342Z,1513245731.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:11.695Z,1513245731.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:11.715Z,1513245731.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:12.098Z,1513245732.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:12.136Z,1513245732.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:12.496Z,1513245732.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:12.511Z,1513245732.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:12.906Z,1513245732.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:12.927Z,1513245732.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:13.296Z,1513245733.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:13.311Z,1513245733.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:13.694Z,1513245733.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:13.708Z,1513245733.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:14.098Z,1513245734.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:14.112Z,1513245734.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:14.507Z,1513245734.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:14.523Z,1513245734.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:14.919Z,1513245734.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:14.935Z,1513245734.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:15.299Z,1513245735.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:15.333Z,1513245735.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:15.698Z,1513245735.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:15.713Z,1513245735.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:16.093Z,1513245736.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:16.108Z,1513245736.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:16.495Z,1513245736.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:16.510Z,1513245736.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:16.896Z,1513245736.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:16.912Z,1513245736.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:17.306Z,1513245737.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:17.333Z,1513245737.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:17.708Z,1513245737.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:17.739Z,1513245737.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:18.095Z,1513245738.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:18.155Z,1513245738.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:18.495Z,1513245738.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:18.522Z,1513245738.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:18.896Z,1513245738.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:18.954Z,1513245738.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:19.306Z,1513245739.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:19.331Z,1513245739.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:19.702Z,1513245739.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:19.720Z,1513245739.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:20.091Z,1513245740.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:20.117Z,1513245740.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:20.495Z,1513245740.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:20.552Z,1513245740.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:20.895Z,1513245740.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:20.943Z,1513245740.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:21.295Z,1513245741.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:21.331Z,1513245741.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:21.696Z,1513245741.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:21.723Z,1513245741.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:22.094Z,1513245742.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:22.123Z,1513245742.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:22.494Z,1513245742.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:22.525Z,1513245742.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:22.915Z,1513245742.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:22.930Z,1513245742.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:23.309Z,1513245743.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:23.323Z,1513245743.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:23.696Z,1513245743.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:23.727Z,1513245743.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:24.109Z,1513245744.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:24.156Z,1513245744.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:24.522Z,1513245744.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:24.540Z,1513245744.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:24.915Z,1513245744.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:24.932Z,1513245744.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:25.306Z,1513245745.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:25.327Z,1513245745.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:25.694Z,1513245745.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:25.727Z,1513245745.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:26.102Z,1513245746.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:26.147Z,1513245746.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:26.495Z,1513245746.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:26.534Z,1513245746.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:26.895Z,1513245746.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:26.935Z,1513245746.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:27.357Z,1513245747.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:27.414Z,1513245747.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:27.702Z,1513245747.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:27.739Z,1513245747.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:28.098Z,1513245748.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:28.113Z,1513245748.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:28.496Z,1513245748.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:28.515Z,1513245748.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:28.905Z,1513245748.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:28.920Z,1513245748.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:29.302Z,1513245749.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:29.318Z,1513245749.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:29.699Z,1513245749.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:29.713Z,1513245749.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:30.100Z,1513245750.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:30.127Z,1513245750.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:30.538Z,1513245750.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:30.558Z,1513245750.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:30.899Z,1513245750.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:30.931Z,1513245750.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:31.304Z,1513245751.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:31.376Z,1513245751.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:31.702Z,1513245751.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:31.717Z,1513245751.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:32.103Z,1513245752.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:32.118Z,1513245752.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:32.503Z,1513245752.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:32.563Z,1513245752.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:32.913Z,1513245752.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:32.928Z,1513245752.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:33.302Z,1513245753.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:33.339Z,1513245753.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:33.707Z,1513245753.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:33.723Z,1513245753.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:34.102Z,1513245754.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:34.117Z,1513245754.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:34.510Z,1513245754.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:34.539Z,1513245754.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:34.904Z,1513245754.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:34.919Z,1513245754.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:35.311Z,1513245755.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:35.326Z,1513245755.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:35.709Z,1513245755.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:35.723Z,1513245755.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:35.723Z,1513245755.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190
2017-12-14T10:02:35.723Z,1513245755.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:02:35.725Z,1513245755.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:35.725Z,1513245755.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 190
2017-12-14T10:02:35.725Z,1513245755.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:02:35.727Z,1513245755.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:35.727Z,1513245755.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190
2017-12-14T10:02:35.727Z,1513245755.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:02:35.739Z,1513245755.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:02:35.739Z,1513245755.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:02:35.739Z,1513245755.739 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:02:36.097Z,1513245756.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:36.140Z,1513245756.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:02:36.140Z,1513245756.140 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190
2017-12-14T10:02:36.141Z,1513245756.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:02:36.141Z,1513245756.141 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 190
2017-12-14T10:02:36.142Z,1513245756.142 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:02:36.142Z,1513245756.142 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190
2017-12-14T10:02:36.478Z,1513245756.478 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:02:36.508Z,1513245756.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:36.526Z,1513245756.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:02:36.526Z,1513245756.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:02:36.526Z,1513245756.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:02:36.527Z,1513245756.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:02:36.527Z,1513245756.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:02:36.528Z,1513245756.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:02:36.528Z,1513245756.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:02:36.528Z,1513245756.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:02:36.530Z,1513245756.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:02:36.895Z,1513245756.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:36.927Z,1513245756.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:37.308Z,1513245757.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:37.327Z,1513245757.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:37.733Z,1513245757.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:37.772Z,1513245757.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:38.094Z,1513245758.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:38.127Z,1513245758.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:38.513Z,1513245758.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:38.540Z,1513245758.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:38.899Z,1513245758.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:38.935Z,1513245758.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:39.299Z,1513245759.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:39.332Z,1513245759.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:39.690Z,1513245759.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:39.705Z,1513245759.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:40.112Z,1513245760.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:40.139Z,1513245760.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:40.495Z,1513245760.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:40.509Z,1513245760.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:40.922Z,1513245760.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:40.963Z,1513245760.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:41.294Z,1513245761.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:41.322Z,1513245761.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:41.708Z,1513245761.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:41.760Z,1513245761.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:42.108Z,1513245762.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:42.124Z,1513245762.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:42.494Z,1513245762.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:42.529Z,1513245762.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:42.895Z,1513245762.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:42.927Z,1513245762.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:43.307Z,1513245763.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:43.322Z,1513245763.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:43.326Z,1513245763.326 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T09:57:42.0Z
2017-12-14T10:02:43.326Z,1513245763.326 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:02:43.326Z,1513245763.326 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:02:43.696Z,1513245763.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:43.732Z,1513245763.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:47.778Z,1513245767.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:47.795Z,1513245767.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:47.874Z,1513245767.874 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0220.lzma
2017-12-14T10:02:47.919Z,1513245767.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:47.934Z,1513245767.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:48.256Z,1513245768.256 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:02:48.274Z,1513245768.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:48.327Z,1513245768.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:48.811Z,1513245768.811 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0220.lzma.bak
2017-12-14T10:02:48.811Z,1513245768.811 [DataOverHttps](INFO): SBD MOMSN=5438439
2017-12-14T10:02:48.846Z,1513245768.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:48.889Z,1513245768.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:49.822Z,1513245769.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:49.838Z,1513245769.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:49.973Z,1513245769.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:49.988Z,1513245769.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:53.483Z,1513245773.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:53.556Z,1513245773.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:53.671Z,1513245773.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:53.711Z,1513245773.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:54.035Z,1513245774.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:54.067Z,1513245774.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:54.432Z,1513245774.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:54.483Z,1513245774.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:54.852Z,1513245774.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:54.871Z,1513245774.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:55.252Z,1513245775.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:55.307Z,1513245775.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:58.818Z,1513245778.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:58.850Z,1513245778.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:58.940Z,1513245778.940 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0221.lzma
2017-12-14T10:02:58.962Z,1513245778.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:59.010Z,1513245779.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:59.308Z,1513245779.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:59.323Z,1513245779.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:02:59.680Z,1513245779.680 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0221.lzma.bak
2017-12-14T10:02:59.680Z,1513245779.680 [DataOverHttps](INFO): SBD MOMSN=5438441
2017-12-14T10:02:59.733Z,1513245779.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:02:59.756Z,1513245779.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:21.463Z,1513245801.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:21.527Z,1513245801.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:21.530Z,1513245801.530 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:03:21.530Z,1513245801.530 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:03:21.530Z,1513245801.530 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:03:21.624Z,1513245801.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:21.666Z,1513245801.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:25.321Z,1513245805.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:25.336Z,1513245805.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:25.449Z,1513245805.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:25.495Z,1513245805.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:25.814Z,1513245805.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:25.844Z,1513245805.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:26.207Z,1513245806.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:26.247Z,1513245806.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:26.604Z,1513245806.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:26.632Z,1513245806.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:27.014Z,1513245807.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:27.032Z,1513245807.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:27.416Z,1513245807.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:27.430Z,1513245807.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:27.830Z,1513245807.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:27.865Z,1513245807.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:28.218Z,1513245808.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:28.235Z,1513245808.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:28.622Z,1513245808.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:28.643Z,1513245808.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:29.016Z,1513245809.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:29.035Z,1513245809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:29.411Z,1513245809.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:29.431Z,1513245809.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:29.822Z,1513245809.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:29.836Z,1513245809.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:30.218Z,1513245810.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:30.239Z,1513245810.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:30.614Z,1513245810.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:30.635Z,1513245810.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:31.027Z,1513245811.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:31.042Z,1513245811.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:31.426Z,1513245811.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:31.441Z,1513245811.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:31.822Z,1513245811.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:31.837Z,1513245811.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:32.214Z,1513245812.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:32.247Z,1513245812.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:32.603Z,1513245812.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:32.625Z,1513245812.625 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T10:03:32.625Z,1513245812.625 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:03:32.625Z,1513245812.625 [BPC1](ERROR): Data Fault
2017-12-14T10:03:32.633Z,1513245812.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:32.646Z,1513245812.646 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:03:33.004Z,1513245813.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:33.041Z,1513245813.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:33.403Z,1513245813.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:33.437Z,1513245813.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:33.810Z,1513245813.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:33.851Z,1513245813.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:33.878Z,1513245813.878 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:03:33.879Z,1513245813.879 [BPC1] No Fault, FailCount= 1
2017-12-14T10:03:34.229Z,1513245814.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:34.287Z,1513245814.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:34.626Z,1513245814.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:34.641Z,1513245814.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:35.004Z,1513245815.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:35.031Z,1513245815.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:35.408Z,1513245815.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:35.438Z,1513245815.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:35.803Z,1513245815.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:35.857Z,1513245815.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:36.210Z,1513245816.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:36.231Z,1513245816.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:36.608Z,1513245816.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:36.623Z,1513245816.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:37.066Z,1513245817.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:37.106Z,1513245817.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:37.427Z,1513245817.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:37.442Z,1513245817.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:37.822Z,1513245817.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:37.847Z,1513245817.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:38.216Z,1513245818.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:38.232Z,1513245818.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:38.603Z,1513245818.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:38.628Z,1513245818.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:39.003Z,1513245819.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:39.046Z,1513245819.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:39.403Z,1513245819.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:39.431Z,1513245819.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:39.827Z,1513245819.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:39.842Z,1513245819.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:40.228Z,1513245820.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:40.247Z,1513245820.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:40.627Z,1513245820.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:40.647Z,1513245820.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:41.016Z,1513245821.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:41.031Z,1513245821.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:41.403Z,1513245821.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:41.429Z,1513245821.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:41.824Z,1513245821.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:41.838Z,1513245821.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:42.203Z,1513245822.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:42.234Z,1513245822.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:42.604Z,1513245822.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:42.659Z,1513245822.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:43.025Z,1513245823.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:43.048Z,1513245823.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:43.418Z,1513245823.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:43.446Z,1513245823.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:43.818Z,1513245823.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:43.886Z,1513245823.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:44.207Z,1513245824.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:44.246Z,1513245824.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:44.604Z,1513245824.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:44.619Z,1513245824.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:45.008Z,1513245825.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:45.023Z,1513245825.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:45.403Z,1513245825.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:45.419Z,1513245825.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:45.817Z,1513245825.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:45.844Z,1513245825.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:46.221Z,1513245826.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:46.252Z,1513245826.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:46.626Z,1513245826.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:46.658Z,1513245826.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:47.011Z,1513245827.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:47.031Z,1513245827.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:47.413Z,1513245827.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:47.429Z,1513245827.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:47.815Z,1513245827.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:47.834Z,1513245827.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:48.210Z,1513245828.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:48.233Z,1513245828.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:48.610Z,1513245828.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:48.632Z,1513245828.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:49.031Z,1513245829.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:49.051Z,1513245829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:49.431Z,1513245829.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:49.451Z,1513245829.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:49.839Z,1513245829.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:49.891Z,1513245829.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:50.203Z,1513245830.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:50.235Z,1513245830.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:50.611Z,1513245830.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:50.637Z,1513245830.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:51.004Z,1513245831.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:51.035Z,1513245831.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:51.406Z,1513245831.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:51.443Z,1513245831.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:51.829Z,1513245831.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:51.845Z,1513245831.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:52.243Z,1513245832.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:52.257Z,1513245832.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:52.630Z,1513245832.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:52.662Z,1513245832.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:53.029Z,1513245833.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:53.069Z,1513245833.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:53.414Z,1513245833.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:53.486Z,1513245833.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:53.818Z,1513245833.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:53.833Z,1513245833.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:54.214Z,1513245834.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:54.229Z,1513245834.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:54.611Z,1513245834.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:54.648Z,1513245834.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:55.030Z,1513245835.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:55.051Z,1513245835.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:55.425Z,1513245835.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:55.441Z,1513245835.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:55.827Z,1513245835.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:55.879Z,1513245835.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:56.231Z,1513245836.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:56.259Z,1513245836.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:56.604Z,1513245836.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:56.658Z,1513245836.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:57.004Z,1513245837.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:57.043Z,1513245837.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:57.405Z,1513245837.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:57.420Z,1513245837.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:57.817Z,1513245837.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:57.844Z,1513245837.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:58.237Z,1513245838.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:58.259Z,1513245838.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:58.642Z,1513245838.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:58.663Z,1513245838.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:59.021Z,1513245839.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:59.050Z,1513245839.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:59.407Z,1513245839.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:59.422Z,1513245839.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:03:59.819Z,1513245839.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:03:59.850Z,1513245839.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:00.212Z,1513245840.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:00.227Z,1513245840.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:00.614Z,1513245840.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:00.629Z,1513245840.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:01.022Z,1513245841.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:01.054Z,1513245841.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:01.422Z,1513245841.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:01.454Z,1513245841.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:01.825Z,1513245841.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:01.854Z,1513245841.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:02.214Z,1513245842.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:02.231Z,1513245842.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:02.628Z,1513245842.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:02.689Z,1513245842.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:03.016Z,1513245843.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:03.045Z,1513245843.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:03.409Z,1513245843.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:03.424Z,1513245843.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:03.822Z,1513245843.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:03.845Z,1513245843.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:04.221Z,1513245844.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:04.253Z,1513245844.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:04.622Z,1513245844.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:04.688Z,1513245844.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:05.007Z,1513245845.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:05.031Z,1513245845.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:05.416Z,1513245845.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:05.462Z,1513245845.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:05.815Z,1513245845.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:05.830Z,1513245845.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:06.227Z,1513245846.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:06.243Z,1513245846.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:06.609Z,1513245846.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:06.631Z,1513245846.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:07.019Z,1513245847.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:07.040Z,1513245847.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:07.426Z,1513245847.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:07.442Z,1513245847.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:07.825Z,1513245847.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:07.840Z,1513245847.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:08.212Z,1513245848.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:08.235Z,1513245848.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:08.606Z,1513245848.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:08.638Z,1513245848.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:09.038Z,1513245849.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:09.085Z,1513245849.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:09.419Z,1513245849.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:09.457Z,1513245849.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:09.821Z,1513245849.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:09.879Z,1513245849.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:10.225Z,1513245850.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:10.271Z,1513245850.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:10.621Z,1513245850.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:10.648Z,1513245850.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:11.010Z,1513245851.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:11.025Z,1513245851.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:11.410Z,1513245851.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:11.434Z,1513245851.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:11.828Z,1513245851.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:11.856Z,1513245851.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:12.230Z,1513245852.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:12.270Z,1513245852.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:12.621Z,1513245852.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:12.636Z,1513245852.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:13.042Z,1513245853.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:13.063Z,1513245853.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:13.432Z,1513245853.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:13.448Z,1513245853.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:13.821Z,1513245853.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:13.852Z,1513245853.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:14.209Z,1513245854.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:14.224Z,1513245854.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:14.610Z,1513245854.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:14.625Z,1513245854.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:15.012Z,1513245855.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:15.027Z,1513245855.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:15.478Z,1513245855.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:15.521Z,1513245855.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:15.829Z,1513245855.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:15.863Z,1513245855.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:16.221Z,1513245856.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:16.236Z,1513245856.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:16.624Z,1513245856.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:16.680Z,1513245856.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:17.007Z,1513245857.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:17.035Z,1513245857.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:17.404Z,1513245857.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:17.431Z,1513245857.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:17.804Z,1513245857.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:17.855Z,1513245857.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:18.245Z,1513245858.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:18.275Z,1513245858.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:18.603Z,1513245858.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:18.692Z,1513245858.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:19.017Z,1513245859.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:19.037Z,1513245859.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:19.418Z,1513245859.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:19.453Z,1513245859.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:19.826Z,1513245859.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:19.851Z,1513245859.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:20.212Z,1513245860.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:20.270Z,1513245860.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:20.608Z,1513245860.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:20.622Z,1513245860.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:21.015Z,1513245861.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:21.029Z,1513245861.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:21.412Z,1513245861.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:21.427Z,1513245861.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:21.822Z,1513245861.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:21.836Z,1513245861.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:22.246Z,1513245862.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:22.290Z,1513245862.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:25.752Z,1513245865.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:25.767Z,1513245865.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:25.863Z,1513245865.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:25.909Z,1513245865.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:26.223Z,1513245866.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:26.261Z,1513245866.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:26.650Z,1513245866.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:26.701Z,1513245866.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:27.016Z,1513245867.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:27.035Z,1513245867.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:27.419Z,1513245867.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:27.439Z,1513245867.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:27.829Z,1513245867.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:27.862Z,1513245867.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:28.229Z,1513245868.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:28.260Z,1513245868.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:28.637Z,1513245868.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:28.672Z,1513245868.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:29.023Z,1513245869.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:29.038Z,1513245869.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:29.419Z,1513245869.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:29.438Z,1513245869.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:29.826Z,1513245869.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:29.840Z,1513245869.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:30.222Z,1513245870.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:30.277Z,1513245870.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:30.620Z,1513245870.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:30.636Z,1513245870.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:31.033Z,1513245871.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:31.061Z,1513245871.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:31.438Z,1513245871.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:31.479Z,1513245871.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:31.826Z,1513245871.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:31.841Z,1513245871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:32.226Z,1513245872.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:32.241Z,1513245872.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:32.625Z,1513245872.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:32.641Z,1513245872.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:33.016Z,1513245873.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:33.052Z,1513245873.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:33.426Z,1513245873.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:33.440Z,1513245873.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:33.837Z,1513245873.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:33.853Z,1513245873.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:34.238Z,1513245874.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:34.253Z,1513245874.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:34.638Z,1513245874.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:34.654Z,1513245874.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:35.026Z,1513245875.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:35.047Z,1513245875.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:35.423Z,1513245875.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:35.443Z,1513245875.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:35.826Z,1513245875.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:35.842Z,1513245875.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:36.229Z,1513245876.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:36.244Z,1513245876.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:36.624Z,1513245876.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:36.639Z,1513245876.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:37.034Z,1513245877.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:37.048Z,1513245877.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:37.434Z,1513245877.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:37.449Z,1513245877.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:37.830Z,1513245877.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:37.855Z,1513245877.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:38.223Z,1513245878.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:38.243Z,1513245878.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:38.626Z,1513245878.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:38.687Z,1513245878.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:39.016Z,1513245879.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:39.079Z,1513245879.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:39.418Z,1513245879.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:39.444Z,1513245879.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:39.843Z,1513245879.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:39.898Z,1513245879.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:40.240Z,1513245880.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:40.255Z,1513245880.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:40.632Z,1513245880.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:40.685Z,1513245880.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:41.040Z,1513245881.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:41.085Z,1513245881.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:41.415Z,1513245881.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:41.446Z,1513245881.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:41.815Z,1513245881.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:41.847Z,1513245881.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:42.217Z,1513245882.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:42.257Z,1513245882.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:42.615Z,1513245882.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:42.653Z,1513245882.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:43.042Z,1513245883.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:43.057Z,1513245883.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:43.437Z,1513245883.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:43.458Z,1513245883.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:43.826Z,1513245883.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:43.859Z,1513245883.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:44.241Z,1513245884.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:44.297Z,1513245884.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:44.615Z,1513245884.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:44.647Z,1513245884.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:45.024Z,1513245885.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:45.059Z,1513245885.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:45.422Z,1513245885.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:45.436Z,1513245885.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:45.825Z,1513245885.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:45.852Z,1513245885.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:46.233Z,1513245886.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:46.260Z,1513245886.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:46.633Z,1513245886.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:46.661Z,1513245886.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:47.021Z,1513245887.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:47.052Z,1513245887.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:47.422Z,1513245887.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:47.443Z,1513245887.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:47.823Z,1513245887.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:47.843Z,1513245887.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:48.230Z,1513245888.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:48.245Z,1513245888.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:48.624Z,1513245888.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:48.639Z,1513245888.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:49.044Z,1513245889.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:49.103Z,1513245889.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:49.441Z,1513245889.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:49.456Z,1513245889.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:49.839Z,1513245889.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:49.855Z,1513245889.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:50.215Z,1513245890.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:50.250Z,1513245890.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:50.650Z,1513245890.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:50.704Z,1513245890.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:51.016Z,1513245891.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:51.051Z,1513245891.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:51.423Z,1513245891.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:51.458Z,1513245891.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:51.826Z,1513245891.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:51.859Z,1513245891.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:52.236Z,1513245892.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:52.267Z,1513245892.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:52.625Z,1513245892.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:52.654Z,1513245892.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:53.021Z,1513245893.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:53.036Z,1513245893.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:53.422Z,1513245893.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:53.436Z,1513245893.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:53.853Z,1513245893.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:53.918Z,1513245893.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:54.220Z,1513245894.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:54.235Z,1513245894.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:54.624Z,1513245894.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:54.640Z,1513245894.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:55.038Z,1513245895.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:55.065Z,1513245895.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:55.438Z,1513245895.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:55.469Z,1513245895.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:55.838Z,1513245895.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:55.875Z,1513245895.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:56.220Z,1513245896.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:56.243Z,1513245896.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:56.625Z,1513245896.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:56.647Z,1513245896.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:57.038Z,1513245897.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:57.066Z,1513245897.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:57.415Z,1513245897.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:57.447Z,1513245897.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:57.835Z,1513245897.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:57.856Z,1513245897.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:58.238Z,1513245898.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:58.258Z,1513245898.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:58.646Z,1513245898.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:58.663Z,1513245898.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:59.016Z,1513245899.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:59.052Z,1513245899.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:59.419Z,1513245899.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:59.451Z,1513245899.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:04:59.815Z,1513245899.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:04:59.847Z,1513245899.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:00.247Z,1513245900.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:00.297Z,1513245900.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:00.635Z,1513245900.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:00.655Z,1513245900.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:01.026Z,1513245901.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:01.118Z,1513245901.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:01.429Z,1513245901.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:01.455Z,1513245901.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:01.830Z,1513245901.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:01.900Z,1513245901.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:02.218Z,1513245902.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:02.251Z,1513245902.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:02.616Z,1513245902.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:02.655Z,1513245902.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:03.018Z,1513245903.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:03.049Z,1513245903.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:03.440Z,1513245903.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:03.486Z,1513245903.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:03.838Z,1513245903.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:03.852Z,1513245903.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:04.241Z,1513245904.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:04.256Z,1513245904.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:04.634Z,1513245904.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:04.655Z,1513245904.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:05.016Z,1513245905.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:05.048Z,1513245905.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:05.427Z,1513245905.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:05.447Z,1513245905.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:05.815Z,1513245905.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:05.839Z,1513245905.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:06.215Z,1513245906.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:06.249Z,1513245906.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:06.639Z,1513245906.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:06.667Z,1513245906.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:07.025Z,1513245907.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:07.052Z,1513245907.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:07.439Z,1513245907.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:07.454Z,1513245907.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:07.838Z,1513245907.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:07.860Z,1513245907.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:08.218Z,1513245908.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:08.253Z,1513245908.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:08.615Z,1513245908.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:08.650Z,1513245908.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:09.016Z,1513245909.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:09.055Z,1513245909.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:09.420Z,1513245909.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:09.435Z,1513245909.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:09.829Z,1513245909.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:09.856Z,1513245909.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:10.245Z,1513245910.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:10.260Z,1513245910.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:10.637Z,1513245910.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:10.653Z,1513245910.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:11.024Z,1513245911.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:11.077Z,1513245911.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:11.429Z,1513245911.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:11.444Z,1513245911.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:11.850Z,1513245911.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:11.871Z,1513245911.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:12.216Z,1513245912.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:12.255Z,1513245912.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:12.615Z,1513245912.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:12.647Z,1513245912.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:13.046Z,1513245913.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:13.070Z,1513245913.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:13.437Z,1513245913.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:13.476Z,1513245913.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:13.834Z,1513245913.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:13.848Z,1513245913.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:14.225Z,1513245914.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:14.247Z,1513245914.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:14.617Z,1513245914.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:14.632Z,1513245914.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:15.016Z,1513245915.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:15.055Z,1513245915.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:15.423Z,1513245915.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:15.456Z,1513245915.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:15.829Z,1513245915.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:15.856Z,1513245915.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:16.251Z,1513245916.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:16.284Z,1513245916.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:16.637Z,1513245916.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:16.666Z,1513245916.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:17.023Z,1513245917.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:17.039Z,1513245917.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:17.426Z,1513245917.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:17.441Z,1513245917.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:17.824Z,1513245917.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:17.839Z,1513245917.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:18.225Z,1513245918.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:18.240Z,1513245918.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:18.626Z,1513245918.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:18.641Z,1513245918.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:19.030Z,1513245919.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:19.045Z,1513245919.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:19.438Z,1513245919.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:19.496Z,1513245919.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:19.828Z,1513245919.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:19.843Z,1513245919.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:20.224Z,1513245920.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:20.239Z,1513245920.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:20.625Z,1513245920.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:20.647Z,1513245920.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:21.030Z,1513245921.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:21.045Z,1513245921.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:21.425Z,1513245921.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:21.440Z,1513245921.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:21.834Z,1513245921.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:21.849Z,1513245921.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:22.233Z,1513245922.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:22.249Z,1513245922.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:25.697Z,1513245925.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:25.807Z,1513245925.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:25.915Z,1513245925.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:25.955Z,1513245925.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:26.305Z,1513245926.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:26.320Z,1513245926.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:26.707Z,1513245926.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:26.724Z,1513245926.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:27.098Z,1513245927.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:27.146Z,1513245927.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:27.499Z,1513245927.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:27.522Z,1513245927.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:27.915Z,1513245927.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:27.967Z,1513245927.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:28.320Z,1513245928.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:28.335Z,1513245928.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:28.751Z,1513245928.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:28.832Z,1513245928.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:29.117Z,1513245929.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:29.167Z,1513245929.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:29.502Z,1513245929.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:29.517Z,1513245929.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:29.895Z,1513245929.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:29.922Z,1513245929.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:30.306Z,1513245930.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:30.320Z,1513245930.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:30.690Z,1513245930.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:30.782Z,1513245930.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:31.118Z,1513245931.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:31.139Z,1513245931.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:31.519Z,1513245931.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:31.535Z,1513245931.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:31.902Z,1513245931.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:31.935Z,1513245931.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:32.337Z,1513245932.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:32.439Z,1513245932.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:32.698Z,1513245932.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:32.723Z,1513245932.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:33.105Z,1513245933.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:33.123Z,1513245933.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:33.491Z,1513245933.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:33.521Z,1513245933.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:33.928Z,1513245933.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:33.942Z,1513245933.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:34.314Z,1513245934.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:34.330Z,1513245934.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:34.710Z,1513245934.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:34.732Z,1513245934.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:35.099Z,1513245935.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:35.134Z,1513245935.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:35.493Z,1513245935.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:35.520Z,1513245935.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:35.900Z,1513245935.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:35.916Z,1513245935.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:36.298Z,1513245936.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:36.347Z,1513245936.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:36.691Z,1513245936.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:36.727Z,1513245936.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:36.727Z,1513245936.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191
2017-12-14T10:05:36.727Z,1513245936.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:05:36.733Z,1513245936.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:36.733Z,1513245936.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 191
2017-12-14T10:05:36.733Z,1513245936.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:05:36.735Z,1513245936.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:36.735Z,1513245936.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191
2017-12-14T10:05:36.735Z,1513245936.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:05:36.771Z,1513245936.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:05:36.771Z,1513245936.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:05:36.771Z,1513245936.771 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:05:37.099Z,1513245937.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:37.155Z,1513245937.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:05:37.156Z,1513245937.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191
2017-12-14T10:05:37.156Z,1513245937.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:05:37.156Z,1513245937.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 191
2017-12-14T10:05:37.161Z,1513245937.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:05:37.161Z,1513245937.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191
2017-12-14T10:05:37.518Z,1513245937.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:37.531Z,1513245937.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:05:37.532Z,1513245937.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:05:37.532Z,1513245937.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:05:37.532Z,1513245937.532 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:05:37.533Z,1513245937.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:05:37.533Z,1513245937.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:05:37.534Z,1513245937.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:05:37.534Z,1513245937.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:05:37.534Z,1513245937.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:05:37.916Z,1513245937.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:37.931Z,1513245937.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:38.304Z,1513245938.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:38.328Z,1513245938.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:38.730Z,1513245938.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:38.752Z,1513245938.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:39.099Z,1513245939.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:39.116Z,1513245939.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:39.496Z,1513245939.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:39.521Z,1513245939.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:39.906Z,1513245939.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:39.922Z,1513245939.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:40.301Z,1513245940.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:40.333Z,1513245940.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:40.702Z,1513245940.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:40.718Z,1513245940.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:41.104Z,1513245941.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:41.118Z,1513245941.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:41.494Z,1513245941.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:41.525Z,1513245941.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:41.924Z,1513245941.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:41.962Z,1513245941.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:42.302Z,1513245942.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:42.317Z,1513245942.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:42.729Z,1513245942.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:42.799Z,1513245942.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:43.113Z,1513245943.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:43.136Z,1513245943.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:43.511Z,1513245943.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:43.526Z,1513245943.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:43.914Z,1513245943.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:43.935Z,1513245943.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:44.292Z,1513245944.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:44.332Z,1513245944.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:44.714Z,1513245944.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:44.796Z,1513245944.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:45.113Z,1513245945.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:45.146Z,1513245945.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:45.507Z,1513245945.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:45.535Z,1513245945.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:45.925Z,1513245945.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:45.940Z,1513245945.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:46.307Z,1513245946.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:46.333Z,1513245946.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:46.723Z,1513245946.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:46.737Z,1513245946.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:47.099Z,1513245947.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:47.130Z,1513245947.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:47.492Z,1513245947.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:47.514Z,1513245947.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:47.902Z,1513245947.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:47.917Z,1513245947.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:48.339Z,1513245948.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:48.502Z,1513245948.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:48.691Z,1513245948.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:48.706Z,1513245948.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:49.112Z,1513245949.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:49.174Z,1513245949.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:49.507Z,1513245949.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:49.531Z,1513245949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:49.902Z,1513245949.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:49.951Z,1513245949.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:50.300Z,1513245950.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:50.327Z,1513245950.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:50.699Z,1513245950.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:50.723Z,1513245950.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:51.100Z,1513245951.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:51.123Z,1513245951.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:51.504Z,1513245951.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:51.520Z,1513245951.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:51.910Z,1513245951.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:51.926Z,1513245951.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:52.303Z,1513245952.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:52.325Z,1513245952.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:52.716Z,1513245952.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:52.731Z,1513245952.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:53.098Z,1513245953.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:53.125Z,1513245953.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:53.491Z,1513245953.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:53.514Z,1513245953.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:53.891Z,1513245953.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:53.927Z,1513245953.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:54.299Z,1513245954.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:54.326Z,1513245954.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:54.693Z,1513245954.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:54.740Z,1513245954.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:55.122Z,1513245955.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:55.152Z,1513245955.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:55.511Z,1513245955.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:55.526Z,1513245955.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:55.906Z,1513245955.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:55.934Z,1513245955.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:56.301Z,1513245956.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:56.316Z,1513245956.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:56.798Z,1513245956.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:56.821Z,1513245956.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:57.106Z,1513245957.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:57.141Z,1513245957.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:57.499Z,1513245957.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:57.523Z,1513245957.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:57.935Z,1513245957.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:57.987Z,1513245957.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:58.325Z,1513245958.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:58.340Z,1513245958.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:58.748Z,1513245958.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:58.796Z,1513245958.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:59.106Z,1513245959.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:59.121Z,1513245959.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:59.508Z,1513245959.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:59.528Z,1513245959.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:05:59.903Z,1513245959.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:05:59.918Z,1513245959.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:00.305Z,1513245960.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:00.320Z,1513245960.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:00.689Z,1513245960.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:00.719Z,1513245960.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:01.105Z,1513245961.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:01.139Z,1513245961.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:01.505Z,1513245961.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:01.533Z,1513245961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:01.903Z,1513245961.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:01.923Z,1513245961.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:02.306Z,1513245962.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:02.321Z,1513245962.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:02.699Z,1513245962.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:02.720Z,1513245962.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:03.094Z,1513245963.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:03.121Z,1513245963.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:03.507Z,1513245963.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:03.526Z,1513245963.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:03.917Z,1513245963.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:03.932Z,1513245963.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:04.306Z,1513245964.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:04.320Z,1513245964.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:04.715Z,1513245964.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:04.738Z,1513245964.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:05.092Z,1513245965.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:05.130Z,1513245965.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:05.498Z,1513245965.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:05.539Z,1513245965.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:05.904Z,1513245965.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:05.934Z,1513245965.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:06.301Z,1513245966.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:06.315Z,1513245966.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:06.690Z,1513245966.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:06.726Z,1513245966.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:07.107Z,1513245967.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:07.123Z,1513245967.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:07.505Z,1513245967.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:07.520Z,1513245967.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:07.935Z,1513245967.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:07.956Z,1513245967.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:08.304Z,1513245968.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:08.319Z,1513245968.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:08.701Z,1513245968.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:08.724Z,1513245968.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:09.109Z,1513245969.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:09.125Z,1513245969.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:09.491Z,1513245969.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:09.527Z,1513245969.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:09.920Z,1513245969.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:09.990Z,1513245969.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:10.317Z,1513245970.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:10.382Z,1513245970.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:10.757Z,1513245970.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:10.794Z,1513245970.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:11.135Z,1513245971.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:11.166Z,1513245971.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:11.497Z,1513245971.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:11.558Z,1513245971.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:11.905Z,1513245971.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:11.920Z,1513245971.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:12.303Z,1513245972.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:12.352Z,1513245972.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:12.731Z,1513245972.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:12.806Z,1513245972.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:13.124Z,1513245973.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:13.140Z,1513245973.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:13.517Z,1513245973.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:13.531Z,1513245973.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:13.899Z,1513245973.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:13.939Z,1513245973.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:14.338Z,1513245974.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:14.436Z,1513245974.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:14.687Z,1513245974.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:14.735Z,1513245974.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:15.098Z,1513245975.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:15.120Z,1513245975.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:15.505Z,1513245975.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:15.519Z,1513245975.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:15.912Z,1513245975.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:15.926Z,1513245975.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:16.307Z,1513245976.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:16.339Z,1513245976.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:16.712Z,1513245976.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:16.727Z,1513245976.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:17.092Z,1513245977.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:17.131Z,1513245977.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:17.486Z,1513245977.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:17.511Z,1513245977.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:17.887Z,1513245977.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:17.928Z,1513245977.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:18.326Z,1513245978.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:18.333Z,1513245978.333 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T10:06:18.446Z,1513245978.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:18.721Z,1513245978.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:18.751Z,1513245978.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:19.131Z,1513245979.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:19.147Z,1513245979.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:19.512Z,1513245979.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:19.614Z,1513245979.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:19.910Z,1513245979.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:19.932Z,1513245979.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:20.309Z,1513245980.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:20.424Z,1513245980.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:20.693Z,1513245980.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:20.771Z,1513245980.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:21.091Z,1513245981.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:21.142Z,1513245981.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:21.492Z,1513245981.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:21.543Z,1513245981.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:21.918Z,1513245981.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:21.975Z,1513245981.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:22.320Z,1513245982.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:22.336Z,1513245982.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:28.048Z,1513245988.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:28.065Z,1513245988.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:28.239Z,1513245988.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:28.302Z,1513245988.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:28.552Z,1513245988.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:28.567Z,1513245988.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:28.925Z,1513245988.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:28.973Z,1513245988.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:29.324Z,1513245989.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:29.370Z,1513245989.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:29.762Z,1513245989.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:29.783Z,1513245989.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:30.162Z,1513245990.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:30.186Z,1513245990.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:30.560Z,1513245990.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:30.619Z,1513245990.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:30.923Z,1513245990.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:30.963Z,1513245990.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:31.362Z,1513245991.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:31.429Z,1513245991.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:31.726Z,1513245991.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:31.767Z,1513245991.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:32.130Z,1513245992.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:32.216Z,1513245992.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:32.528Z,1513245992.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:32.571Z,1513245992.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:32.913Z,1513245992.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:32.994Z,1513245992.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:33.313Z,1513245993.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:33.393Z,1513245993.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:33.730Z,1513245993.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:33.776Z,1513245993.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:34.128Z,1513245994.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:34.199Z,1513245994.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:34.542Z,1513245994.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:34.571Z,1513245994.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:34.915Z,1513245994.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:34.967Z,1513245994.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:35.310Z,1513245995.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:35.357Z,1513245995.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:35.724Z,1513245995.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:35.779Z,1513245995.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:36.128Z,1513245996.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:36.175Z,1513245996.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:36.525Z,1513245996.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:36.563Z,1513245996.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:36.927Z,1513245996.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:36.955Z,1513245996.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:37.327Z,1513245997.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:37.370Z,1513245997.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:37.727Z,1513245997.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:37.764Z,1513245997.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:38.131Z,1513245998.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:38.187Z,1513245998.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:38.531Z,1513245998.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:38.583Z,1513245998.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:38.924Z,1513245998.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:38.981Z,1513245998.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:39.325Z,1513245999.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:39.368Z,1513245999.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:39.727Z,1513245999.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:39.767Z,1513245999.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:40.136Z,1513246000.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:40.168Z,1513246000.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:40.523Z,1513246000.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:40.575Z,1513246000.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:40.923Z,1513246000.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:40.967Z,1513246000.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:41.323Z,1513246001.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:41.346Z,1513246001.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:41.730Z,1513246001.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:41.772Z,1513246001.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:42.131Z,1513246002.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:42.173Z,1513246002.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:42.533Z,1513246002.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:42.594Z,1513246002.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:42.931Z,1513246002.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:42.959Z,1513246002.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:43.323Z,1513246003.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:43.379Z,1513246003.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:43.734Z,1513246003.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:43.755Z,1513246003.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:44.130Z,1513246004.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:44.147Z,1513246004.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:44.545Z,1513246004.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:44.567Z,1513246004.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:44.916Z,1513246004.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:44.952Z,1513246004.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:45.316Z,1513246005.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:45.341Z,1513246005.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:45.726Z,1513246005.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:45.741Z,1513246005.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:46.125Z,1513246006.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:46.141Z,1513246006.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:46.524Z,1513246006.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:46.539Z,1513246006.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:46.926Z,1513246006.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:46.941Z,1513246006.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:47.323Z,1513246007.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:47.338Z,1513246007.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:47.725Z,1513246007.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:47.740Z,1513246007.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:48.126Z,1513246008.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:48.140Z,1513246008.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:48.526Z,1513246008.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:48.542Z,1513246008.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:49.088Z,1513246009.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:49.140Z,1513246009.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:49.320Z,1513246009.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:49.351Z,1513246009.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:49.734Z,1513246009.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:49.749Z,1513246009.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:50.134Z,1513246010.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:50.148Z,1513246010.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:50.534Z,1513246010.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:50.549Z,1513246010.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:50.921Z,1513246010.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:50.937Z,1513246010.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:51.320Z,1513246011.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:51.339Z,1513246011.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:51.735Z,1513246011.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:51.794Z,1513246011.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:52.134Z,1513246012.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:52.149Z,1513246012.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:52.534Z,1513246012.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:52.549Z,1513246012.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:52.927Z,1513246012.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:52.947Z,1513246012.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:53.324Z,1513246013.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:53.341Z,1513246013.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:53.733Z,1513246013.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:53.749Z,1513246013.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:54.134Z,1513246014.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:54.149Z,1513246014.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:54.534Z,1513246014.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:54.614Z,1513246014.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:54.912Z,1513246014.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:54.942Z,1513246014.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:55.323Z,1513246015.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:55.391Z,1513246015.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:55.730Z,1513246015.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:55.751Z,1513246015.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:56.138Z,1513246016.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:56.177Z,1513246016.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:56.531Z,1513246016.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:56.547Z,1513246016.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:56.912Z,1513246016.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:56.949Z,1513246016.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:57.324Z,1513246017.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:57.339Z,1513246017.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:57.730Z,1513246017.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:57.744Z,1513246017.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:58.138Z,1513246018.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:58.152Z,1513246018.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:58.569Z,1513246018.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:58.592Z,1513246018.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:58.930Z,1513246018.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:58.951Z,1513246018.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:59.322Z,1513246019.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:59.342Z,1513246019.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:06:59.734Z,1513246019.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:06:59.783Z,1513246019.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:00.133Z,1513246020.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:00.148Z,1513246020.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:00.530Z,1513246020.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:00.544Z,1513246020.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:00.934Z,1513246020.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:00.951Z,1513246020.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:01.325Z,1513246021.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:01.347Z,1513246021.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:01.744Z,1513246021.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:01.764Z,1513246021.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:02.133Z,1513246022.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:02.152Z,1513246022.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:02.529Z,1513246022.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:02.544Z,1513246022.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:02.916Z,1513246022.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:02.951Z,1513246022.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:03.316Z,1513246023.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:03.342Z,1513246023.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:03.717Z,1513246023.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:03.751Z,1513246023.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:04.137Z,1513246024.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:04.153Z,1513246024.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:04.524Z,1513246024.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:04.576Z,1513246024.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:04.918Z,1513246024.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:04.960Z,1513246024.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:05.316Z,1513246025.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:05.347Z,1513246025.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:05.730Z,1513246025.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:05.757Z,1513246025.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:06.129Z,1513246026.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:06.160Z,1513246026.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:06.526Z,1513246026.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:06.540Z,1513246026.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:06.923Z,1513246026.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:06.943Z,1513246026.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:07.318Z,1513246027.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:07.333Z,1513246027.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:07.730Z,1513246027.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:07.787Z,1513246027.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:08.131Z,1513246028.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:08.190Z,1513246028.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:08.526Z,1513246028.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:08.542Z,1513246028.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:08.920Z,1513246028.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:08.943Z,1513246028.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:09.321Z,1513246029.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:09.336Z,1513246029.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:09.734Z,1513246029.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:09.768Z,1513246029.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:10.126Z,1513246030.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:10.142Z,1513246030.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:10.535Z,1513246030.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:10.574Z,1513246030.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:10.922Z,1513246030.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:10.936Z,1513246030.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:11.338Z,1513246031.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:11.378Z,1513246031.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:11.741Z,1513246031.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:11.772Z,1513246031.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:12.130Z,1513246032.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:12.151Z,1513246032.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:12.529Z,1513246032.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:12.551Z,1513246032.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:12.926Z,1513246032.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:12.947Z,1513246032.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:13.444Z,1513246033.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:13.488Z,1513246033.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:13.734Z,1513246033.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:13.775Z,1513246033.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:14.134Z,1513246034.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:14.149Z,1513246034.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:14.535Z,1513246034.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:14.555Z,1513246034.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:14.923Z,1513246034.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:14.937Z,1513246034.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:15.327Z,1513246035.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:15.379Z,1513246035.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:15.733Z,1513246035.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:15.749Z,1513246035.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:16.131Z,1513246036.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:16.150Z,1513246036.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:16.526Z,1513246036.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:16.609Z,1513246036.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:16.924Z,1513246036.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:16.940Z,1513246036.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:17.325Z,1513246037.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:17.340Z,1513246037.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:17.800Z,1513246037.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:17.864Z,1513246037.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:18.134Z,1513246038.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:18.166Z,1513246038.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:18.523Z,1513246038.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:18.574Z,1513246038.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:18.922Z,1513246038.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:18.936Z,1513246038.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:19.321Z,1513246039.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:19.335Z,1513246039.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:19.722Z,1513246039.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:19.738Z,1513246039.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:20.133Z,1513246040.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:20.168Z,1513246040.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:20.522Z,1513246040.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:20.536Z,1513246040.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:20.920Z,1513246040.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:21.013Z,1513246041.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:21.321Z,1513246041.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:21.336Z,1513246041.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:21.726Z,1513246041.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:21.751Z,1513246041.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:22.130Z,1513246042.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:22.144Z,1513246042.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:22.530Z,1513246042.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:22.545Z,1513246042.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:25.991Z,1513246045.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:26.024Z,1513246046.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:26.126Z,1513246046.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:26.174Z,1513246046.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:26.499Z,1513246046.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:26.523Z,1513246046.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:26.894Z,1513246046.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:26.943Z,1513246046.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:27.294Z,1513246047.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:27.324Z,1513246047.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:27.680Z,1513246047.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:27.694Z,1513246047.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:28.088Z,1513246048.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:28.127Z,1513246048.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:28.488Z,1513246048.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:28.526Z,1513246048.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:28.894Z,1513246048.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:28.925Z,1513246048.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:29.290Z,1513246049.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:29.305Z,1513246049.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:29.698Z,1513246049.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:29.731Z,1513246049.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:30.084Z,1513246050.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:30.100Z,1513246050.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:30.480Z,1513246050.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:30.496Z,1513246050.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:30.878Z,1513246050.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:30.923Z,1513246050.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:31.295Z,1513246051.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:31.322Z,1513246051.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:31.674Z,1513246051.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:31.689Z,1513246051.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:32.094Z,1513246052.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:32.116Z,1513246052.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:32.514Z,1513246052.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:32.529Z,1513246052.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:32.894Z,1513246052.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:32.923Z,1513246052.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:33.276Z,1513246053.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:33.303Z,1513246053.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:33.681Z,1513246053.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:33.695Z,1513246053.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:34.082Z,1513246054.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:34.097Z,1513246054.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:34.484Z,1513246054.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:34.499Z,1513246054.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:34.883Z,1513246054.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:34.898Z,1513246054.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:35.285Z,1513246055.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:35.301Z,1513246055.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:35.694Z,1513246055.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:35.729Z,1513246055.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:36.075Z,1513246056.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:36.096Z,1513246056.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:36.486Z,1513246056.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:36.501Z,1513246056.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:36.934Z,1513246056.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:36.996Z,1513246056.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:37.281Z,1513246057.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:37.303Z,1513246057.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:37.700Z,1513246057.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:37.732Z,1513246057.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:38.113Z,1513246058.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:38.143Z,1513246058.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:38.488Z,1513246058.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:38.539Z,1513246058.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:38.894Z,1513246058.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:38.909Z,1513246058.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:39.280Z,1513246059.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:39.333Z,1513246059.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:39.671Z,1513246059.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:39.697Z,1513246059.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:40.099Z,1513246060.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:40.115Z,1513246060.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:40.495Z,1513246060.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:40.555Z,1513246060.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:40.892Z,1513246060.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:40.906Z,1513246060.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:41.272Z,1513246061.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:41.339Z,1513246061.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:41.672Z,1513246061.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:41.699Z,1513246061.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:42.094Z,1513246062.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:42.108Z,1513246062.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:42.468Z,1513246062.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:42.483Z,1513246062.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:42.885Z,1513246062.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:42.908Z,1513246062.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:43.286Z,1513246063.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:43.307Z,1513246063.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:43.686Z,1513246063.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:43.729Z,1513246063.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:44.071Z,1513246064.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:44.099Z,1513246064.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:44.479Z,1513246064.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:44.495Z,1513246064.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:44.881Z,1513246064.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:44.903Z,1513246064.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:45.286Z,1513246065.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:45.307Z,1513246065.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:45.685Z,1513246065.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:45.700Z,1513246065.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:46.094Z,1513246066.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:46.109Z,1513246066.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:46.518Z,1513246066.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:46.547Z,1513246066.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:46.901Z,1513246066.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:46.947Z,1513246066.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:47.278Z,1513246067.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:47.309Z,1513246067.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:47.680Z,1513246067.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:47.718Z,1513246067.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:48.078Z,1513246068.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:48.093Z,1513246068.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:48.474Z,1513246068.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:48.490Z,1513246068.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:48.885Z,1513246068.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:48.918Z,1513246068.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:49.289Z,1513246069.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:49.316Z,1513246069.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:49.694Z,1513246069.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:49.758Z,1513246069.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:50.094Z,1513246070.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:50.126Z,1513246070.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:50.481Z,1513246070.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:50.496Z,1513246070.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:50.881Z,1513246070.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:50.896Z,1513246070.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:51.280Z,1513246071.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:51.296Z,1513246071.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:51.680Z,1513246071.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:51.695Z,1513246071.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:52.081Z,1513246072.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:52.096Z,1513246072.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:52.485Z,1513246072.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:52.507Z,1513246072.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:52.898Z,1513246072.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:52.929Z,1513246072.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:53.290Z,1513246073.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:53.333Z,1513246073.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:53.671Z,1513246073.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:53.699Z,1513246073.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:54.071Z,1513246074.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:54.136Z,1513246074.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:54.480Z,1513246074.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:54.495Z,1513246074.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:54.889Z,1513246074.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:54.904Z,1513246074.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:55.302Z,1513246075.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:55.316Z,1513246075.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:55.685Z,1513246075.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:55.704Z,1513246075.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:56.083Z,1513246076.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:56.103Z,1513246076.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:56.512Z,1513246076.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:56.548Z,1513246076.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:56.877Z,1513246076.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:56.900Z,1513246076.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:57.285Z,1513246077.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:57.300Z,1513246077.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:57.688Z,1513246077.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:57.707Z,1513246077.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:58.096Z,1513246078.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:58.111Z,1513246078.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:58.493Z,1513246078.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:58.515Z,1513246078.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:58.893Z,1513246078.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:58.910Z,1513246078.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:59.284Z,1513246079.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:59.299Z,1513246079.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:07:59.710Z,1513246079.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:07:59.746Z,1513246079.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:00.072Z,1513246080.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:00.112Z,1513246080.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:00.511Z,1513246080.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:00.531Z,1513246080.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:00.890Z,1513246080.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:00.925Z,1513246080.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:01.297Z,1513246081.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:01.313Z,1513246081.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:01.695Z,1513246081.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:01.751Z,1513246081.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:02.071Z,1513246082.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:02.132Z,1513246082.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:02.472Z,1513246082.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:02.507Z,1513246082.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:02.897Z,1513246082.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:02.967Z,1513246082.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:03.272Z,1513246083.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:03.302Z,1513246083.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:03.675Z,1513246083.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:03.727Z,1513246083.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:04.085Z,1513246084.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:04.112Z,1513246084.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:04.485Z,1513246084.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:04.519Z,1513246084.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:04.886Z,1513246084.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:04.916Z,1513246084.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:05.272Z,1513246085.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:05.287Z,1513246085.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:05.675Z,1513246085.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:05.692Z,1513246085.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:06.076Z,1513246086.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:06.095Z,1513246086.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:06.475Z,1513246086.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:06.490Z,1513246086.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:06.889Z,1513246086.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:06.920Z,1513246086.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:07.293Z,1513246087.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:07.324Z,1513246087.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:07.686Z,1513246087.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:07.701Z,1513246087.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:08.082Z,1513246088.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:08.098Z,1513246088.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:08.479Z,1513246088.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:08.494Z,1513246088.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:08.875Z,1513246088.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:08.898Z,1513246088.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:09.285Z,1513246089.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:09.324Z,1513246089.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:09.681Z,1513246089.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:09.696Z,1513246089.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:10.090Z,1513246090.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:10.106Z,1513246090.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:10.488Z,1513246090.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:10.504Z,1513246090.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:10.886Z,1513246090.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:10.909Z,1513246090.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:11.285Z,1513246091.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:11.299Z,1513246091.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:11.680Z,1513246091.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:11.695Z,1513246091.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:12.093Z,1513246092.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:12.147Z,1513246092.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:12.509Z,1513246092.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:12.552Z,1513246092.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:12.903Z,1513246092.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:12.919Z,1513246092.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:13.292Z,1513246093.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:13.308Z,1513246093.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:13.694Z,1513246093.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:13.709Z,1513246093.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:14.071Z,1513246094.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:14.103Z,1513246094.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:14.506Z,1513246094.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:14.527Z,1513246094.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:14.872Z,1513246094.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:14.900Z,1513246094.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:15.272Z,1513246095.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:15.300Z,1513246095.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:15.729Z,1513246095.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:15.767Z,1513246095.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:16.090Z,1513246096.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:16.127Z,1513246096.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:16.490Z,1513246096.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:16.514Z,1513246096.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:16.894Z,1513246096.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:16.923Z,1513246096.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:17.277Z,1513246097.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:17.291Z,1513246097.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:17.676Z,1513246097.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:17.700Z,1513246097.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:18.078Z,1513246098.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:18.092Z,1513246098.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:18.479Z,1513246098.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:18.494Z,1513246098.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:18.928Z,1513246098.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:18.948Z,1513246098.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:19.285Z,1513246099.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:19.300Z,1513246099.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:19.689Z,1513246099.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:19.728Z,1513246099.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:20.081Z,1513246100.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:20.096Z,1513246100.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:20.479Z,1513246100.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:20.499Z,1513246100.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:20.884Z,1513246100.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:20.903Z,1513246100.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:21.285Z,1513246101.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:21.300Z,1513246101.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:21.684Z,1513246101.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:21.699Z,1513246101.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:21.702Z,1513246101.702 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T10:08:21.702Z,1513246101.702 [Default:CheckIn:C.Wait] Stopped
2017-12-14T10:08:21.702Z,1513246101.702 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T10:08:21.702Z,1513246101.702 [Default:CheckIn:D] Running Loop=1
2017-12-14T10:08:22.087Z,1513246102.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:22.118Z,1513246102.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:22.122Z,1513246102.122 [Default:CheckIn:D] Stopped
2017-12-14T10:08:22.122Z,1513246102.122 [Default:CheckIn:E] Running Loop=1
2017-12-14T10:08:22.496Z,1513246102.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:22.512Z,1513246102.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:22.515Z,1513246102.515 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 575.112174 min 
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn:E] Stopped
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn] Stopped
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn](INFO): Running loop #56
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn] Running Loop=56
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T10:08:22.516Z,1513246102.516 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T10:08:22.886Z,1513246102.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:22.910Z,1513246102.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:25.936Z,1513246105.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:26.306Z,1513246106.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:26.447Z,1513246106.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:26.530Z,1513246106.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:26.568Z,1513246106.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:26.729Z,1513246106.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:26.938Z,1513246106.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:26.986Z,1513246106.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:27.133Z,1513246107.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:27.337Z,1513246107.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:27.368Z,1513246107.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:27.737Z,1513246107.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:27.791Z,1513246107.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:28.125Z,1513246108.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:28.140Z,1513246108.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:28.520Z,1513246108.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:28.552Z,1513246108.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:28.927Z,1513246108.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:28.945Z,1513246108.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:29.328Z,1513246109.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:29.343Z,1513246109.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:29.735Z,1513246109.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:29.750Z,1513246109.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:30.136Z,1513246110.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:30.152Z,1513246110.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:30.532Z,1513246110.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:30.547Z,1513246110.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:30.926Z,1513246110.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:30.941Z,1513246110.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:31.325Z,1513246111.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:31.340Z,1513246111.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:31.737Z,1513246111.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:31.788Z,1513246111.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:31.941Z,1513246111.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:32.137Z,1513246112.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:32.156Z,1513246112.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:32.538Z,1513246112.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:32.552Z,1513246112.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:32.739Z,1513246112.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:32.922Z,1513246112.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:32.944Z,1513246112.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:33.153Z,1513246113.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:33.312Z,1513246113.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:33.347Z,1513246113.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:33.739Z,1513246113.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:33.754Z,1513246113.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:33.950Z,1513246113.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:34.139Z,1513246114.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:34.153Z,1513246114.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:34.538Z,1513246114.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:34.554Z,1513246114.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:34.746Z,1513246114.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:34.937Z,1513246114.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:34.972Z,1513246114.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:35.149Z,1513246115.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:35.315Z,1513246115.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:35.356Z,1513246115.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:35.721Z,1513246115.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:35.744Z,1513246115.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:35.946Z,1513246115.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:36.129Z,1513246116.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:36.195Z,1513246116.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:36.526Z,1513246116.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:36.553Z,1513246116.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:36.741Z,1513246116.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:36.924Z,1513246116.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:36.955Z,1513246116.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:37.147Z,1513246117.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:37.321Z,1513246117.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:37.363Z,1513246117.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:37.733Z,1513246117.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:37.767Z,1513246117.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:37.767Z,1513246117.767 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192
2017-12-14T10:08:37.767Z,1513246117.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:08:37.768Z,1513246117.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:37.770Z,1513246117.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 192
2017-12-14T10:08:37.770Z,1513246117.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:08:37.772Z,1513246117.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:37.772Z,1513246117.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192
2017-12-14T10:08:37.772Z,1513246117.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:08:37.783Z,1513246117.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:08:37.784Z,1513246117.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:08:37.784Z,1513246117.784 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:08:37.943Z,1513246117.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:38.171Z,1513246118.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:38.250Z,1513246118.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:08:38.250Z,1513246118.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192
2017-12-14T10:08:38.250Z,1513246118.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:08:38.250Z,1513246118.250 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 192
2017-12-14T10:08:38.251Z,1513246118.251 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:08:38.251Z,1513246118.251 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192
2017-12-14T10:08:38.539Z,1513246118.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:38.552Z,1513246118.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:08:38.553Z,1513246118.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:08:38.553Z,1513246118.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:08:38.554Z,1513246118.554 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:08:38.554Z,1513246118.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:08:38.554Z,1513246118.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:08:38.555Z,1513246118.555 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:08:38.555Z,1513246118.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:08:38.555Z,1513246118.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:08:38.737Z,1513246118.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:38.917Z,1513246118.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:38.955Z,1513246118.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:39.141Z,1513246119.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:39.319Z,1513246119.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:39.366Z,1513246119.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:39.734Z,1513246119.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:39.754Z,1513246119.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:39.938Z,1513246119.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:40.145Z,1513246120.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:40.221Z,1513246120.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:40.538Z,1513246120.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:40.552Z,1513246120.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:40.734Z,1513246120.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:40.916Z,1513246120.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:40.951Z,1513246120.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:41.137Z,1513246121.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:41.316Z,1513246121.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:41.394Z,1513246121.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:41.729Z,1513246121.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:41.757Z,1513246121.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:41.934Z,1513246121.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:42.129Z,1513246122.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:42.165Z,1513246122.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:42.534Z,1513246122.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:42.548Z,1513246122.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:42.729Z,1513246122.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:42.921Z,1513246122.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:42.959Z,1513246122.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:43.133Z,1513246123.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:43.325Z,1513246123.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:43.340Z,1513246123.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:43.730Z,1513246123.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:43.745Z,1513246123.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:44.134Z,1513246124.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:44.168Z,1513246124.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:44.566Z,1513246124.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:44.596Z,1513246124.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:44.924Z,1513246124.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:44.938Z,1513246124.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:45.324Z,1513246125.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:45.343Z,1513246125.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:45.738Z,1513246125.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:45.773Z,1513246125.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:45.966Z,1513246125.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:46.130Z,1513246126.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:46.144Z,1513246126.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:46.530Z,1513246126.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:46.551Z,1513246126.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:46.762Z,1513246126.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:46.924Z,1513246126.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:46.939Z,1513246126.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:47.165Z,1513246127.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:47.326Z,1513246127.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:47.341Z,1513246127.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:47.731Z,1513246127.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:47.746Z,1513246127.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:47.964Z,1513246127.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:48.134Z,1513246128.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:48.218Z,1513246128.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:48.536Z,1513246128.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:48.551Z,1513246128.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:48.758Z,1513246128.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:48.939Z,1513246128.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:48.994Z,1513246128.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:49.161Z,1513246129.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:49.315Z,1513246129.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:49.347Z,1513246129.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:49.729Z,1513246129.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:49.782Z,1513246129.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:49.958Z,1513246129.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:50.136Z,1513246130.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:50.151Z,1513246130.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:50.536Z,1513246130.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:50.550Z,1513246130.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:50.754Z,1513246130.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:50.931Z,1513246130.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:50.971Z,1513246130.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:51.157Z,1513246131.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:51.315Z,1513246131.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:51.351Z,1513246131.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:51.730Z,1513246131.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:51.757Z,1513246131.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:51.953Z,1513246131.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:52.138Z,1513246132.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:52.159Z,1513246132.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:52.529Z,1513246132.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:52.544Z,1513246132.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:52.749Z,1513246132.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:52.927Z,1513246132.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:52.966Z,1513246132.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:53.153Z,1513246133.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:53.321Z,1513246133.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:53.348Z,1513246133.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:53.738Z,1513246133.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:53.770Z,1513246133.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:53.949Z,1513246133.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:54.144Z,1513246134.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:54.185Z,1513246134.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:54.532Z,1513246134.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:54.551Z,1513246134.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:54.746Z,1513246134.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:54.934Z,1513246134.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:54.949Z,1513246134.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:55.149Z,1513246135.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:55.323Z,1513246135.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:55.343Z,1513246135.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:55.734Z,1513246135.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:55.749Z,1513246135.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:55.946Z,1513246135.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:56.134Z,1513246136.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:56.149Z,1513246136.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:56.532Z,1513246136.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:56.547Z,1513246136.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:56.741Z,1513246136.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:56.922Z,1513246136.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:56.959Z,1513246136.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:57.146Z,1513246137.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:57.346Z,1513246137.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:57.393Z,1513246137.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:57.744Z,1513246137.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:57.759Z,1513246137.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:57.941Z,1513246137.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:58.140Z,1513246138.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:58.198Z,1513246138.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:58.544Z,1513246138.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:58.559Z,1513246138.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:58.739Z,1513246138.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:58.916Z,1513246138.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:58.951Z,1513246138.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:59.145Z,1513246139.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:59.315Z,1513246139.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:59.350Z,1513246139.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:59.744Z,1513246139.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:08:59.760Z,1513246139.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:08:59.941Z,1513246139.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:00.129Z,1513246140.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:00.156Z,1513246140.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:00.545Z,1513246140.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:00.560Z,1513246140.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:00.739Z,1513246140.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:00.955Z,1513246140.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:00.972Z,1513246140.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:01.169Z,1513246141.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:01.322Z,1513246141.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:01.348Z,1513246141.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:01.725Z,1513246141.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:01.760Z,1513246141.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:01.966Z,1513246141.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:02.133Z,1513246142.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:02.167Z,1513246142.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:02.527Z,1513246142.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:02.554Z,1513246142.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:02.761Z,1513246142.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:02.916Z,1513246142.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:02.936Z,1513246142.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:03.165Z,1513246143.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:03.322Z,1513246143.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:03.363Z,1513246143.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:03.734Z,1513246143.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:03.766Z,1513246143.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:03.961Z,1513246143.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:04.129Z,1513246144.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:04.144Z,1513246144.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:04.533Z,1513246144.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:04.560Z,1513246144.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:04.757Z,1513246144.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:04.926Z,1513246144.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:04.953Z,1513246144.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:05.161Z,1513246145.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:05.327Z,1513246145.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:05.347Z,1513246145.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:05.730Z,1513246145.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:05.746Z,1513246145.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:05.958Z,1513246145.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:06.134Z,1513246146.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:06.149Z,1513246146.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:06.529Z,1513246146.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:06.544Z,1513246146.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:06.753Z,1513246146.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:06.923Z,1513246146.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:07.003Z,1513246147.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:07.157Z,1513246147.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:07.320Z,1513246147.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:07.336Z,1513246147.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:07.732Z,1513246147.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:07.748Z,1513246147.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:07.954Z,1513246147.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:08.132Z,1513246148.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:08.147Z,1513246148.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:08.533Z,1513246148.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:08.548Z,1513246148.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:08.749Z,1513246148.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:08.934Z,1513246148.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:08.949Z,1513246148.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:09.153Z,1513246149.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:09.325Z,1513246149.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:09.340Z,1513246149.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:09.732Z,1513246149.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:09.748Z,1513246149.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:09.949Z,1513246149.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:10.158Z,1513246150.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:10.240Z,1513246150.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:10.538Z,1513246150.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:10.553Z,1513246150.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:10.746Z,1513246150.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:10.934Z,1513246150.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:10.987Z,1513246150.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:11.149Z,1513246151.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:11.333Z,1513246151.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:11.355Z,1513246151.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:11.742Z,1513246151.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:11.787Z,1513246151.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:11.946Z,1513246151.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:12.137Z,1513246152.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:12.152Z,1513246152.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:12.531Z,1513246152.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:12.556Z,1513246152.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:12.578Z,1513246152.578 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:09:12.743Z,1513246152.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:12.916Z,1513246152.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:12.943Z,1513246152.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:13.153Z,1513246153.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:13.316Z,1513246153.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:13.343Z,1513246153.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:13.735Z,1513246153.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:13.749Z,1513246153.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:13.950Z,1513246153.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:14.144Z,1513246154.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:14.159Z,1513246154.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:14.533Z,1513246154.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:14.549Z,1513246154.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:14.748Z,1513246154.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:14.916Z,1513246154.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:14.946Z,1513246154.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:15.157Z,1513246155.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:15.319Z,1513246155.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:15.345Z,1513246155.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:15.739Z,1513246155.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:15.753Z,1513246155.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:15.953Z,1513246155.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:16.139Z,1513246156.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:16.153Z,1513246156.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:16.567Z,1513246156.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:16.590Z,1513246156.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:16.749Z,1513246156.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:16.916Z,1513246156.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:16.935Z,1513246156.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:17.153Z,1513246157.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:17.318Z,1513246157.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:17.333Z,1513246157.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:17.729Z,1513246157.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:17.760Z,1513246157.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:17.949Z,1513246157.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:18.138Z,1513246158.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:18.167Z,1513246158.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:18.532Z,1513246158.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:18.552Z,1513246158.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:18.747Z,1513246158.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:18.936Z,1513246158.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:18.950Z,1513246158.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:19.149Z,1513246159.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:19.328Z,1513246159.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:19.343Z,1513246159.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:19.764Z,1513246159.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:19.841Z,1513246159.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:19.946Z,1513246159.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:20.138Z,1513246160.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:20.152Z,1513246160.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:20.532Z,1513246160.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:20.547Z,1513246160.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:20.741Z,1513246160.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:20.924Z,1513246160.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:20.939Z,1513246160.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:21.146Z,1513246161.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:21.330Z,1513246161.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:21.344Z,1513246161.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:21.734Z,1513246161.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:21.749Z,1513246161.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:21.941Z,1513246161.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:22.133Z,1513246162.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:22.147Z,1513246162.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:22.546Z,1513246162.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:22.580Z,1513246162.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:22.738Z,1513246162.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:22.932Z,1513246162.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:22.948Z,1513246162.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:23.142Z,1513246163.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:23.937Z,1513246163.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:24.733Z,1513246164.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:25.137Z,1513246165.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:25.933Z,1513246165.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:26.422Z,1513246166.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:26.437Z,1513246166.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:26.550Z,1513246166.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:26.588Z,1513246166.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:26.731Z,1513246166.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:26.907Z,1513246166.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:26.935Z,1513246166.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:27.146Z,1513246167.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:27.306Z,1513246167.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:27.332Z,1513246167.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:27.690Z,1513246167.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:27.706Z,1513246167.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:27.942Z,1513246167.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:28.097Z,1513246168.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:28.112Z,1513246168.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:28.494Z,1513246168.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:28.510Z,1513246168.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:28.739Z,1513246168.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:28.898Z,1513246168.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:28.916Z,1513246168.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:29.149Z,1513246169.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:29.310Z,1513246169.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:29.366Z,1513246169.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:29.715Z,1513246169.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:29.747Z,1513246169.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:29.946Z,1513246169.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:30.090Z,1513246170.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:30.106Z,1513246170.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:30.491Z,1513246170.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:30.511Z,1513246170.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:30.741Z,1513246170.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:30.894Z,1513246170.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:30.910Z,1513246170.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:31.146Z,1513246171.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:31.291Z,1513246171.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:31.312Z,1513246171.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:31.692Z,1513246171.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:31.756Z,1513246171.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:31.941Z,1513246171.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:32.103Z,1513246172.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:32.120Z,1513246172.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:32.525Z,1513246172.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:32.563Z,1513246172.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:32.740Z,1513246172.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:32.910Z,1513246172.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:32.925Z,1513246172.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:33.146Z,1513246173.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:33.296Z,1513246173.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:33.310Z,1513246173.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:33.683Z,1513246173.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:33.715Z,1513246173.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:33.942Z,1513246173.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:34.083Z,1513246174.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:34.109Z,1513246174.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:34.483Z,1513246174.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:34.518Z,1513246174.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:34.739Z,1513246174.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:34.905Z,1513246174.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:34.914Z,1513246174.914 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:09:34.914Z,1513246174.914 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:09:34.914Z,1513246174.914 [BPC1](ERROR): Communications Fault
2017-12-14T10:09:34.931Z,1513246174.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:34.966Z,1513246174.966 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:09:35.141Z,1513246175.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:35.308Z,1513246175.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:35.327Z,1513246175.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:35.737Z,1513246175.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:35.779Z,1513246175.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:35.938Z,1513246175.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:36.083Z,1513246176.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:36.118Z,1513246176.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:36.132Z,1513246176.132 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:09:36.133Z,1513246176.133 [BPC1] No Fault, FailCount= 1
2017-12-14T10:09:36.483Z,1513246176.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:36.558Z,1513246176.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:36.733Z,1513246176.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:36.885Z,1513246176.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:36.923Z,1513246176.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:37.137Z,1513246177.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:37.286Z,1513246177.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:37.317Z,1513246177.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:37.689Z,1513246177.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:37.703Z,1513246177.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:37.934Z,1513246177.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:38.150Z,1513246178.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:38.253Z,1513246178.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:38.503Z,1513246178.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:38.530Z,1513246178.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:38.729Z,1513246178.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:38.914Z,1513246178.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:38.946Z,1513246178.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:39.133Z,1513246179.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:39.294Z,1513246179.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:39.308Z,1513246179.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:39.684Z,1513246179.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:39.707Z,1513246179.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:39.930Z,1513246179.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:40.092Z,1513246180.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:40.107Z,1513246180.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:40.484Z,1513246180.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:40.499Z,1513246180.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:40.727Z,1513246180.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:40.906Z,1513246180.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:40.933Z,1513246180.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:41.146Z,1513246181.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:41.305Z,1513246181.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:41.339Z,1513246181.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:41.722Z,1513246181.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:41.781Z,1513246181.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:41.942Z,1513246181.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:42.106Z,1513246182.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:42.143Z,1513246182.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:42.492Z,1513246182.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:42.507Z,1513246182.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:42.739Z,1513246182.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:42.899Z,1513246182.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:42.916Z,1513246182.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:43.149Z,1513246183.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:43.290Z,1513246183.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:43.305Z,1513246183.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:43.691Z,1513246183.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:43.705Z,1513246183.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:43.946Z,1513246183.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:44.094Z,1513246184.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:44.108Z,1513246184.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:44.498Z,1513246184.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:44.512Z,1513246184.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:44.741Z,1513246184.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:44.894Z,1513246184.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:44.946Z,1513246184.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:45.146Z,1513246185.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:45.292Z,1513246185.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:45.306Z,1513246185.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:45.699Z,1513246185.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:45.727Z,1513246185.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:45.943Z,1513246185.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:46.088Z,1513246186.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:46.126Z,1513246186.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:46.487Z,1513246186.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:46.515Z,1513246186.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:46.737Z,1513246186.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:46.902Z,1513246186.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:46.919Z,1513246186.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:47.143Z,1513246187.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:47.314Z,1513246187.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:47.329Z,1513246187.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:47.705Z,1513246187.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:47.721Z,1513246187.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:47.938Z,1513246187.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:48.083Z,1513246188.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:48.114Z,1513246188.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:48.548Z,1513246188.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:48.591Z,1513246188.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:48.733Z,1513246188.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:48.886Z,1513246188.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:48.923Z,1513246188.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:49.137Z,1513246189.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:49.289Z,1513246189.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:49.320Z,1513246189.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:49.683Z,1513246189.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:49.720Z,1513246189.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:49.933Z,1513246189.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:50.093Z,1513246190.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:50.116Z,1513246190.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:50.520Z,1513246190.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:50.535Z,1513246190.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:50.730Z,1513246190.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:50.901Z,1513246190.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:50.931Z,1513246190.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:51.133Z,1513246191.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:51.290Z,1513246191.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:51.304Z,1513246191.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:51.730Z,1513246191.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:51.779Z,1513246191.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:51.930Z,1513246191.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:52.084Z,1513246192.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:52.103Z,1513246192.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:52.504Z,1513246192.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:52.535Z,1513246192.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:52.725Z,1513246192.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:52.906Z,1513246192.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:52.958Z,1513246192.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:53.129Z,1513246193.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:53.298Z,1513246193.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:53.313Z,1513246193.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:53.697Z,1513246193.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:53.712Z,1513246193.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:53.925Z,1513246193.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:54.093Z,1513246194.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:54.108Z,1513246194.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:54.490Z,1513246194.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:54.504Z,1513246194.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:54.722Z,1513246194.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:54.892Z,1513246194.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:54.906Z,1513246194.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:55.149Z,1513246195.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:55.293Z,1513246195.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:55.307Z,1513246195.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:55.693Z,1513246195.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:55.758Z,1513246195.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:55.946Z,1513246195.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:56.094Z,1513246196.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:56.109Z,1513246196.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:56.505Z,1513246196.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:56.537Z,1513246196.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:56.744Z,1513246196.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:56.894Z,1513246196.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:56.931Z,1513246196.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:57.153Z,1513246197.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:57.292Z,1513246197.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:57.340Z,1513246197.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:57.694Z,1513246197.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:57.708Z,1513246197.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:57.950Z,1513246197.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:58.119Z,1513246198.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:58.201Z,1513246198.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:58.491Z,1513246198.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:58.506Z,1513246198.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:58.746Z,1513246198.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:58.898Z,1513246198.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:58.913Z,1513246198.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:59.149Z,1513246199.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:59.306Z,1513246199.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:59.342Z,1513246199.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:59.697Z,1513246199.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:09:59.712Z,1513246199.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:09:59.946Z,1513246199.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:00.090Z,1513246200.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:00.105Z,1513246200.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:00.491Z,1513246200.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:00.511Z,1513246200.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:00.741Z,1513246200.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:00.899Z,1513246200.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:00.915Z,1513246200.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:01.146Z,1513246201.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:01.318Z,1513246201.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:01.353Z,1513246201.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:01.692Z,1513246201.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:01.711Z,1513246201.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:01.941Z,1513246201.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:02.105Z,1513246202.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:02.120Z,1513246202.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:02.505Z,1513246202.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:02.520Z,1513246202.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:02.737Z,1513246202.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:02.918Z,1513246202.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:02.949Z,1513246202.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:03.141Z,1513246203.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:03.283Z,1513246203.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:03.320Z,1513246203.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:03.680Z,1513246203.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:03.708Z,1513246203.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:03.938Z,1513246203.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:04.084Z,1513246204.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:04.115Z,1513246204.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:04.502Z,1513246204.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:04.538Z,1513246204.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:04.733Z,1513246204.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:04.913Z,1513246204.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:04.935Z,1513246204.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:05.137Z,1513246205.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:05.308Z,1513246205.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:05.324Z,1513246205.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:05.700Z,1513246205.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:05.731Z,1513246205.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:05.934Z,1513246205.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:06.081Z,1513246206.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:06.113Z,1513246206.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:06.488Z,1513246206.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:06.541Z,1513246206.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:06.729Z,1513246206.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:06.884Z,1513246206.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:06.920Z,1513246206.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:07.133Z,1513246207.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:07.282Z,1513246207.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:07.298Z,1513246207.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:07.733Z,1513246207.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:07.776Z,1513246207.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:07.930Z,1513246207.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:08.098Z,1513246208.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:08.127Z,1513246208.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:08.498Z,1513246208.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:08.530Z,1513246208.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:08.727Z,1513246208.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:08.902Z,1513246208.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:08.924Z,1513246208.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:09.137Z,1513246209.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:09.290Z,1513246209.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:09.304Z,1513246209.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:09.688Z,1513246209.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:09.707Z,1513246209.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:09.934Z,1513246209.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:10.088Z,1513246210.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:10.104Z,1513246210.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:10.484Z,1513246210.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:10.557Z,1513246210.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:10.731Z,1513246210.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:10.947Z,1513246210.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:10.971Z,1513246210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:11.141Z,1513246211.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:11.306Z,1513246211.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:11.321Z,1513246211.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:11.703Z,1513246211.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:11.728Z,1513246211.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:11.939Z,1513246211.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:12.080Z,1513246212.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:12.116Z,1513246212.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:12.483Z,1513246212.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:12.509Z,1513246212.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:12.733Z,1513246212.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:12.883Z,1513246212.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:12.925Z,1513246212.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:13.137Z,1513246213.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:13.284Z,1513246213.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:13.314Z,1513246213.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:13.683Z,1513246213.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:13.715Z,1513246213.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:13.934Z,1513246213.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:14.121Z,1513246214.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:14.176Z,1513246214.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:14.508Z,1513246214.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:14.523Z,1513246214.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:14.729Z,1513246214.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:14.895Z,1513246214.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:14.931Z,1513246214.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:15.134Z,1513246215.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:15.284Z,1513246215.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:15.321Z,1513246215.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:15.684Z,1513246215.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:15.715Z,1513246215.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:15.930Z,1513246215.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:16.089Z,1513246216.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:16.120Z,1513246216.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:16.500Z,1513246216.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:16.531Z,1513246216.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:16.726Z,1513246216.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:16.903Z,1513246216.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:16.955Z,1513246216.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:17.129Z,1513246217.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:17.332Z,1513246217.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:17.375Z,1513246217.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:17.702Z,1513246217.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:17.724Z,1513246217.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:17.926Z,1513246217.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:18.089Z,1513246218.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:18.104Z,1513246218.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:18.499Z,1513246218.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:18.556Z,1513246218.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:18.721Z,1513246218.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:18.889Z,1513246218.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:18.904Z,1513246218.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:19.125Z,1513246219.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:19.297Z,1513246219.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:19.312Z,1513246219.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:19.692Z,1513246219.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:19.756Z,1513246219.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:19.921Z,1513246219.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:20.102Z,1513246220.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:20.116Z,1513246220.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:20.528Z,1513246220.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:20.587Z,1513246220.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:20.718Z,1513246220.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:20.897Z,1513246220.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:20.912Z,1513246220.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:21.121Z,1513246221.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:21.297Z,1513246221.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:21.311Z,1513246221.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:21.683Z,1513246221.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:21.707Z,1513246221.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:21.918Z,1513246221.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:22.100Z,1513246222.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:22.116Z,1513246222.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:22.492Z,1513246222.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:22.506Z,1513246222.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:22.715Z,1513246222.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:22.901Z,1513246222.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:22.916Z,1513246222.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:23.157Z,1513246223.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:23.302Z,1513246223.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:23.316Z,1513246223.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:23.953Z,1513246223.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:24.751Z,1513246224.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:25.169Z,1513246225.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:25.965Z,1513246225.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:26.761Z,1513246226.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:26.822Z,1513246226.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:26.851Z,1513246226.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:26.973Z,1513246226.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:27.017Z,1513246227.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:27.165Z,1513246227.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:27.306Z,1513246227.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:27.320Z,1513246227.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:27.712Z,1513246227.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:27.726Z,1513246227.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:27.962Z,1513246227.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:28.104Z,1513246228.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:28.123Z,1513246228.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:28.507Z,1513246228.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:28.527Z,1513246228.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:28.757Z,1513246228.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:28.916Z,1513246228.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:28.967Z,1513246228.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:29.161Z,1513246229.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:29.319Z,1513246229.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:29.334Z,1513246229.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:29.713Z,1513246229.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:29.732Z,1513246229.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:29.958Z,1513246229.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:30.111Z,1513246230.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:30.126Z,1513246230.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:30.499Z,1513246230.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:30.526Z,1513246230.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:30.753Z,1513246230.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:30.921Z,1513246230.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:30.936Z,1513246230.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:31.157Z,1513246231.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:31.300Z,1513246231.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:31.327Z,1513246231.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:31.722Z,1513246231.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:31.743Z,1513246231.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:31.954Z,1513246231.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:32.121Z,1513246232.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:32.143Z,1513246232.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:32.518Z,1513246232.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:32.532Z,1513246232.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:32.751Z,1513246232.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:32.899Z,1513246232.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:32.935Z,1513246232.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:33.157Z,1513246233.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:33.342Z,1513246233.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:33.368Z,1513246233.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:33.699Z,1513246233.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:33.734Z,1513246233.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:33.955Z,1513246233.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:34.124Z,1513246234.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:34.147Z,1513246234.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:34.522Z,1513246234.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:34.540Z,1513246234.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:34.749Z,1513246234.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:34.923Z,1513246234.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:34.943Z,1513246234.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:35.155Z,1513246235.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:35.300Z,1513246235.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:35.327Z,1513246235.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:35.716Z,1513246235.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:35.731Z,1513246235.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:35.949Z,1513246235.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:36.101Z,1513246236.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:36.136Z,1513246236.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:36.526Z,1513246236.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:36.565Z,1513246236.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:36.749Z,1513246236.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:36.910Z,1513246236.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:36.936Z,1513246236.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:37.164Z,1513246237.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:37.321Z,1513246237.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:37.348Z,1513246237.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:37.722Z,1513246237.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:37.743Z,1513246237.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:37.964Z,1513246237.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:38.104Z,1513246238.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:38.135Z,1513246238.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:38.499Z,1513246238.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:38.538Z,1513246238.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:38.758Z,1513246238.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:38.899Z,1513246238.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:38.936Z,1513246238.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:39.165Z,1513246239.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:39.300Z,1513246239.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:39.334Z,1513246239.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:39.699Z,1513246239.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:39.752Z,1513246239.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:39.961Z,1513246239.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:40.127Z,1513246240.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:40.147Z,1513246240.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:40.524Z,1513246240.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:40.587Z,1513246240.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:40.757Z,1513246240.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:40.983Z,1513246240.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:41.013Z,1513246241.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:41.161Z,1513246241.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:41.307Z,1513246241.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:41.359Z,1513246241.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:41.707Z,1513246241.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:41.742Z,1513246241.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:41.958Z,1513246241.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:42.108Z,1513246242.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:42.159Z,1513246242.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:42.511Z,1513246242.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:42.543Z,1513246242.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:42.753Z,1513246242.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:42.933Z,1513246242.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:42.972Z,1513246242.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:43.157Z,1513246243.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:43.322Z,1513246243.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:43.353Z,1513246243.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:43.710Z,1513246243.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:43.726Z,1513246243.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:43.954Z,1513246243.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:44.106Z,1513246244.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:44.121Z,1513246244.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:44.503Z,1513246244.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:44.531Z,1513246244.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:44.749Z,1513246244.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:44.911Z,1513246244.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:44.931Z,1513246244.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:45.153Z,1513246245.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:45.310Z,1513246245.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:45.326Z,1513246245.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:45.723Z,1513246245.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:45.759Z,1513246245.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:45.949Z,1513246245.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:46.125Z,1513246246.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:46.160Z,1513246246.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:46.514Z,1513246246.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:46.530Z,1513246246.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:46.746Z,1513246246.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:46.902Z,1513246246.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:46.935Z,1513246246.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:47.149Z,1513246247.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:47.306Z,1513246247.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:47.321Z,1513246247.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:47.710Z,1513246247.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:47.738Z,1513246247.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:47.946Z,1513246247.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:48.111Z,1513246248.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:48.128Z,1513246248.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:48.518Z,1513246248.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:48.534Z,1513246248.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:48.742Z,1513246248.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:48.918Z,1513246248.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:48.954Z,1513246248.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:49.146Z,1513246249.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:49.345Z,1513246249.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:49.373Z,1513246249.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:49.709Z,1513246249.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:49.724Z,1513246249.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:49.942Z,1513246249.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:50.104Z,1513246250.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:50.127Z,1513246250.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:50.512Z,1513246250.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:50.566Z,1513246250.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:50.739Z,1513246250.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:50.920Z,1513246250.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:50.936Z,1513246250.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:51.145Z,1513246251.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:51.310Z,1513246251.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:51.330Z,1513246251.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:51.723Z,1513246251.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:51.738Z,1513246251.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:51.942Z,1513246251.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:52.122Z,1513246252.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:52.137Z,1513246252.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:52.526Z,1513246252.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:52.559Z,1513246252.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:52.739Z,1513246252.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:52.899Z,1513246252.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:52.927Z,1513246252.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:53.149Z,1513246253.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:53.303Z,1513246253.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:53.329Z,1513246253.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:53.700Z,1513246253.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:53.726Z,1513246253.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:53.946Z,1513246253.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:54.100Z,1513246254.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:54.127Z,1513246254.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:54.520Z,1513246254.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:54.535Z,1513246254.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:54.741Z,1513246254.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:54.918Z,1513246254.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:54.945Z,1513246254.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:55.146Z,1513246255.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:55.323Z,1513246255.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:55.338Z,1513246255.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:55.696Z,1513246255.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:55.728Z,1513246255.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:55.942Z,1513246255.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:56.099Z,1513246256.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:56.135Z,1513246256.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:56.499Z,1513246256.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:56.539Z,1513246256.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:56.737Z,1513246256.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:56.900Z,1513246256.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:56.928Z,1513246256.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:57.141Z,1513246257.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:57.299Z,1513246257.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:57.340Z,1513246257.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:57.713Z,1513246257.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:57.747Z,1513246257.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:57.938Z,1513246257.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:58.117Z,1513246258.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:58.145Z,1513246258.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:58.510Z,1513246258.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:58.540Z,1513246258.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:58.734Z,1513246258.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:58.922Z,1513246258.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:58.968Z,1513246258.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:59.137Z,1513246259.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:59.306Z,1513246259.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:59.320Z,1513246259.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:59.710Z,1513246259.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:10:59.747Z,1513246259.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:10:59.936Z,1513246259.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:00.107Z,1513246260.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:00.122Z,1513246260.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:00.526Z,1513246260.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:00.554Z,1513246260.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:00.729Z,1513246260.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:00.921Z,1513246260.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:00.974Z,1513246260.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:01.133Z,1513246261.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:01.316Z,1513246261.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:01.331Z,1513246261.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:01.707Z,1513246261.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:01.722Z,1513246261.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:01.930Z,1513246261.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:02.132Z,1513246262.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:02.164Z,1513246262.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:02.515Z,1513246262.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:02.569Z,1513246262.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:02.725Z,1513246262.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:02.902Z,1513246262.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:02.934Z,1513246262.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:03.129Z,1513246263.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:03.296Z,1513246263.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:03.331Z,1513246263.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:03.726Z,1513246263.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:03.775Z,1513246263.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:03.925Z,1513246263.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:04.122Z,1513246264.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:04.143Z,1513246264.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:04.519Z,1513246264.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:04.575Z,1513246264.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:04.723Z,1513246264.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:04.921Z,1513246264.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:04.967Z,1513246264.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:05.318Z,1513246265.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:05.350Z,1513246265.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:05.369Z,1513246265.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:05.700Z,1513246265.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:05.734Z,1513246265.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:06.100Z,1513246266.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:06.134Z,1513246266.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:06.145Z,1513246266.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:06.514Z,1513246266.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:06.541Z,1513246266.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:06.913Z,1513246266.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:06.942Z,1513246266.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:06.950Z,1513246266.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:07.312Z,1513246267.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:07.337Z,1513246267.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:07.345Z,1513246267.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:07.699Z,1513246267.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:07.735Z,1513246267.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:08.107Z,1513246268.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:08.142Z,1513246268.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:08.143Z,1513246268.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:08.519Z,1513246268.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:08.558Z,1513246268.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:08.797Z,1513246268.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:08.916Z,1513246268.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:08.947Z,1513246268.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:09.307Z,1513246269.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:09.344Z,1513246269.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:09.593Z,1513246269.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:09.713Z,1513246269.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:09.743Z,1513246269.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:10.110Z,1513246270.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:10.141Z,1513246270.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:10.391Z,1513246270.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:10.521Z,1513246270.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:10.548Z,1513246270.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:10.809Z,1513246270.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:10.904Z,1513246270.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:10.919Z,1513246270.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:11.307Z,1513246271.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:11.324Z,1513246271.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:11.606Z,1513246271.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:11.742Z,1513246271.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:11.766Z,1513246271.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:12.107Z,1513246272.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:12.122Z,1513246272.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:12.403Z,1513246272.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:12.529Z,1513246272.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:12.559Z,1513246272.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:12.813Z,1513246272.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:12.914Z,1513246272.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:12.963Z,1513246272.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:13.321Z,1513246273.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:13.353Z,1513246273.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:13.609Z,1513246273.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:13.709Z,1513246273.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:13.723Z,1513246273.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:14.106Z,1513246274.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:14.129Z,1513246274.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:14.408Z,1513246274.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:14.506Z,1513246274.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:14.535Z,1513246274.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:14.817Z,1513246274.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:14.935Z,1513246274.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:14.968Z,1513246274.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:15.308Z,1513246275.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:15.328Z,1513246275.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:15.613Z,1513246275.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:15.721Z,1513246275.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:15.735Z,1513246275.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:16.116Z,1513246276.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:16.135Z,1513246276.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:16.411Z,1513246276.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:16.519Z,1513246276.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:16.551Z,1513246276.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:16.857Z,1513246276.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:16.911Z,1513246276.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:16.925Z,1513246276.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:17.304Z,1513246277.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:17.319Z,1513246277.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:17.654Z,1513246277.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:17.708Z,1513246277.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:17.732Z,1513246277.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:18.169Z,1513246278.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:18.215Z,1513246278.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:18.449Z,1513246278.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:18.525Z,1513246278.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:18.556Z,1513246278.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:18.933Z,1513246278.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:18.963Z,1513246278.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:19.134Z,1513246279.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:19.314Z,1513246279.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:19.328Z,1513246279.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:19.708Z,1513246279.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:19.723Z,1513246279.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:19.929Z,1513246279.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:20.103Z,1513246280.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:20.130Z,1513246280.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:20.512Z,1513246280.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:20.527Z,1513246280.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:20.728Z,1513246280.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:20.900Z,1513246280.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:20.928Z,1513246280.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:21.165Z,1513246281.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:21.339Z,1513246281.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:21.358Z,1513246281.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:21.709Z,1513246281.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:21.743Z,1513246281.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:21.963Z,1513246281.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:22.172Z,1513246282.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:22.205Z,1513246282.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:22.542Z,1513246282.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:22.559Z,1513246282.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:22.758Z,1513246282.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:22.914Z,1513246282.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:22.945Z,1513246282.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:23.161Z,1513246283.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:23.310Z,1513246283.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:23.351Z,1513246283.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:23.958Z,1513246283.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:24.754Z,1513246284.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:25.157Z,1513246285.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:25.954Z,1513246285.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:26.750Z,1513246286.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:27.153Z,1513246287.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:27.950Z,1513246287.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:28.746Z,1513246288.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:29.149Z,1513246289.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:29.946Z,1513246289.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:30.620Z,1513246290.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:30.639Z,1513246290.639 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:11:30.639Z,1513246290.639 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:11:30.639Z,1513246290.639 [BPC1](ERROR): Communications Fault
2017-12-14T10:11:30.647Z,1513246290.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:30.711Z,1513246290.711 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:11:30.742Z,1513246290.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:30.764Z,1513246290.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:30.796Z,1513246290.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:31.145Z,1513246291.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:31.181Z,1513246291.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:31.268Z,1513246291.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:31.568Z,1513246291.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:31.587Z,1513246291.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:31.652Z,1513246291.652 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:11:31.652Z,1513246291.652 [BPC1] No Fault, FailCount= 1
2017-12-14T10:11:31.943Z,1513246291.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:31.965Z,1513246291.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:32.068Z,1513246292.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:32.357Z,1513246292.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:32.379Z,1513246292.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:32.739Z,1513246292.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:32.804Z,1513246292.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:32.855Z,1513246292.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:33.155Z,1513246293.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:33.161Z,1513246293.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:33.177Z,1513246293.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:33.572Z,1513246293.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:33.671Z,1513246293.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:33.958Z,1513246293.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:33.970Z,1513246293.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:34.068Z,1513246294.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:34.369Z,1513246294.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:34.392Z,1513246294.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:34.766Z,1513246294.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:34.781Z,1513246294.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:34.847Z,1513246294.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:35.149Z,1513246295.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:35.193Z,1513246295.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:35.205Z,1513246295.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:35.548Z,1513246295.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:35.592Z,1513246295.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:35.984Z,1513246295.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:36.002Z,1513246296.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:36.054Z,1513246296.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:36.405Z,1513246296.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:36.459Z,1513246296.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:36.773Z,1513246296.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:36.798Z,1513246296.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:36.813Z,1513246296.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:37.164Z,1513246297.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:37.201Z,1513246297.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:37.214Z,1513246297.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:37.563Z,1513246297.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:37.635Z,1513246297.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:37.960Z,1513246297.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:37.986Z,1513246297.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:37.999Z,1513246297.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:38.371Z,1513246298.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:38.431Z,1513246298.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:38.761Z,1513246298.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:38.809Z,1513246298.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:38.817Z,1513246298.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:38.817Z,1513246298.817 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193
2017-12-14T10:11:38.817Z,1513246298.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:11:38.819Z,1513246298.819 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:38.819Z,1513246298.819 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 193
2017-12-14T10:11:38.819Z,1513246298.819 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:11:38.826Z,1513246298.826 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:38.826Z,1513246298.826 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193
2017-12-14T10:11:38.826Z,1513246298.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:11:38.868Z,1513246298.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:11:38.881Z,1513246298.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:11:38.881Z,1513246298.881 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:11:39.150Z,1513246299.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:39.204Z,1513246299.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:11:39.204Z,1513246299.204 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193
2017-12-14T10:11:39.204Z,1513246299.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:11:39.204Z,1513246299.204 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 193
2017-12-14T10:11:39.213Z,1513246299.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:39.225Z,1513246299.225 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:11:39.225Z,1513246299.225 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193
2017-12-14T10:11:39.572Z,1513246299.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:39.590Z,1513246299.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:11:39.591Z,1513246299.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:11:39.591Z,1513246299.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:11:39.591Z,1513246299.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:11:39.592Z,1513246299.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:11:39.592Z,1513246299.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:11:39.592Z,1513246299.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:11:39.597Z,1513246299.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:11:39.597Z,1513246299.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:11:39.967Z,1513246299.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:40.010Z,1513246300.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:40.044Z,1513246300.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:40.403Z,1513246300.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:40.486Z,1513246300.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:40.759Z,1513246300.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:40.779Z,1513246300.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:40.806Z,1513246300.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:41.169Z,1513246301.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:41.209Z,1513246301.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:41.262Z,1513246301.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:41.560Z,1513246301.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:41.583Z,1513246301.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:41.950Z,1513246301.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:41.987Z,1513246301.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:42.006Z,1513246302.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:42.409Z,1513246302.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:42.465Z,1513246302.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:42.760Z,1513246302.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:42.800Z,1513246302.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:42.802Z,1513246302.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:43.176Z,1513246303.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:43.205Z,1513246303.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:43.213Z,1513246303.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:43.562Z,1513246303.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:43.600Z,1513246303.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:43.960Z,1513246303.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:43.984Z,1513246303.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:44.002Z,1513246304.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:44.374Z,1513246304.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:44.451Z,1513246304.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:44.751Z,1513246304.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:44.798Z,1513246304.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:44.831Z,1513246304.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:45.150Z,1513246305.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:45.198Z,1513246305.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:45.201Z,1513246305.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:45.560Z,1513246305.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:45.595Z,1513246305.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:45.964Z,1513246305.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:45.998Z,1513246305.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:46.035Z,1513246306.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:46.360Z,1513246306.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:46.399Z,1513246306.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:46.794Z,1513246306.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:46.806Z,1513246306.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:46.880Z,1513246306.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:47.185Z,1513246307.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:47.197Z,1513246307.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:47.208Z,1513246307.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:47.554Z,1513246307.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:47.592Z,1513246307.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:47.960Z,1513246307.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:47.994Z,1513246307.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:48.019Z,1513246308.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:48.359Z,1513246308.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:48.375Z,1513246308.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:48.792Z,1513246308.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:48.794Z,1513246308.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:48.809Z,1513246308.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:49.163Z,1513246309.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:49.178Z,1513246309.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:49.563Z,1513246309.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:49.579Z,1513246309.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:49.586Z,1513246309.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:49.961Z,1513246309.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:49.978Z,1513246309.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:50.368Z,1513246310.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:50.383Z,1513246310.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:50.435Z,1513246310.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:50.763Z,1513246310.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:50.834Z,1513246310.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:51.160Z,1513246311.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:51.178Z,1513246311.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:51.239Z,1513246311.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:51.567Z,1513246311.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:51.583Z,1513246311.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:51.972Z,1513246311.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:51.973Z,1513246311.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:52.027Z,1513246312.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:52.392Z,1513246312.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:52.432Z,1513246312.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:52.751Z,1513246312.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:52.770Z,1513246312.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:52.807Z,1513246312.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:53.147Z,1513246313.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:53.182Z,1513246313.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:53.545Z,1513246313.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:53.560Z,1513246313.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:53.566Z,1513246313.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:53.954Z,1513246313.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:53.979Z,1513246313.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:54.363Z,1513246314.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:54.416Z,1513246314.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:54.487Z,1513246314.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:54.767Z,1513246314.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:54.783Z,1513246314.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:55.158Z,1513246315.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:55.173Z,1513246315.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:55.188Z,1513246315.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:55.575Z,1513246315.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:55.595Z,1513246315.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:55.946Z,1513246315.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:55.954Z,1513246315.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:55.977Z,1513246315.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:56.385Z,1513246316.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:56.432Z,1513246316.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:56.752Z,1513246316.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:56.753Z,1513246316.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:56.769Z,1513246316.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:57.153Z,1513246317.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:57.168Z,1513246317.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:57.546Z,1513246317.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:57.569Z,1513246317.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:57.634Z,1513246317.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:57.985Z,1513246317.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:57.999Z,1513246317.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:58.341Z,1513246318.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:58.366Z,1513246318.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:58.449Z,1513246318.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:58.749Z,1513246318.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:58.784Z,1513246318.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:59.138Z,1513246319.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:59.150Z,1513246319.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:59.189Z,1513246319.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:59.549Z,1513246319.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:59.580Z,1513246319.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:11:59.934Z,1513246319.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:59.950Z,1513246319.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:11:59.985Z,1513246319.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:00.352Z,1513246320.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:00.385Z,1513246320.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:00.731Z,1513246320.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:00.792Z,1513246320.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:00.851Z,1513246320.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:01.190Z,1513246321.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:01.205Z,1513246321.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:01.525Z,1513246321.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:01.578Z,1513246321.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:01.598Z,1513246321.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:01.952Z,1513246321.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:01.993Z,1513246321.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:02.322Z,1513246322.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:02.347Z,1513246322.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:02.393Z,1513246322.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:02.780Z,1513246322.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:02.796Z,1513246322.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:03.131Z,1513246323.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:03.156Z,1513246323.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:03.190Z,1513246323.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:03.563Z,1513246323.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:03.603Z,1513246323.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:03.925Z,1513246323.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:04.016Z,1513246324.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:04.039Z,1513246324.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:04.363Z,1513246324.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:04.437Z,1513246324.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:04.721Z,1513246324.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:04.762Z,1513246324.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:04.793Z,1513246324.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:05.155Z,1513246325.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:05.170Z,1513246325.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:05.529Z,1513246325.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:05.556Z,1513246325.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:05.618Z,1513246325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:05.954Z,1513246325.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:05.989Z,1513246325.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:06.007Z,1513246326.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:06.385Z,1513246326.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:06.395Z,1513246326.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:06.459Z,1513246326.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:06.758Z,1513246326.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:06.792Z,1513246326.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:06.806Z,1513246326.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.192Z,1513246327.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.210Z,1513246327.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.231Z,1513246327.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:07.582Z,1513246327.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.597Z,1513246327.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:07.613Z,1513246327.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.952Z,1513246327.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:07.967Z,1513246327.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:08.018Z,1513246328.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:08.372Z,1513246328.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:08.422Z,1513246328.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:08.471Z,1513246328.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:08.752Z,1513246328.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:08.780Z,1513246328.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:08.825Z,1513246328.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.151Z,1513246329.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.177Z,1513246329.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:09.230Z,1513246329.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.567Z,1513246329.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.587Z,1513246329.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:09.633Z,1513246329.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.970Z,1513246329.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:09.991Z,1513246329.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:10.037Z,1513246330.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:10.414Z,1513246330.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:10.464Z,1513246330.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:10.754Z,1513246330.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:10.775Z,1513246330.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:10.835Z,1513246330.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:11.157Z,1513246331.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:11.171Z,1513246331.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:11.237Z,1513246331.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:11.558Z,1513246331.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:11.573Z,1513246331.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:11.958Z,1513246331.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:12.022Z,1513246332.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:12.042Z,1513246332.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:12.357Z,1513246332.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:12.372Z,1513246332.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:12.759Z,1513246332.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:12.796Z,1513246332.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:12.837Z,1513246332.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:13.176Z,1513246333.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:13.234Z,1513246333.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:13.241Z,1513246333.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:13.566Z,1513246333.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:13.597Z,1513246333.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:13.941Z,1513246333.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:13.984Z,1513246333.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:14.038Z,1513246334.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:14.347Z,1513246334.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:14.384Z,1513246334.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:14.790Z,1513246334.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:14.833Z,1513246334.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:14.824Z,1513246334.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:15.152Z,1513246335.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:15.184Z,1513246335.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:15.237Z,1513246335.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:15.559Z,1513246335.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:15.592Z,1513246335.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:15.966Z,1513246335.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:15.992Z,1513246335.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:16.034Z,1513246336.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:16.358Z,1513246336.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:16.384Z,1513246336.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:16.793Z,1513246336.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:16.829Z,1513246336.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:16.840Z,1513246336.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:17.152Z,1513246337.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:17.189Z,1513246337.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:17.233Z,1513246337.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:17.555Z,1513246337.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:17.570Z,1513246337.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:17.956Z,1513246337.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:17.971Z,1513246337.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:18.030Z,1513246338.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:18.364Z,1513246338.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:18.444Z,1513246338.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:18.758Z,1513246338.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:18.773Z,1513246338.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:18.825Z,1513246338.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:19.165Z,1513246339.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:19.180Z,1513246339.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:19.229Z,1513246339.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:19.570Z,1513246339.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:19.584Z,1513246339.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:19.956Z,1513246339.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:19.975Z,1513246339.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:20.026Z,1513246340.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:20.425Z,1513246340.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:20.480Z,1513246340.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:20.748Z,1513246340.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:20.783Z,1513246340.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:20.821Z,1513246340.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:21.147Z,1513246341.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:21.183Z,1513246341.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:21.225Z,1513246341.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:21.562Z,1513246341.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:21.589Z,1513246341.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:21.965Z,1513246341.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:22.021Z,1513246342.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:22.038Z,1513246342.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:22.390Z,1513246342.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:22.463Z,1513246342.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:22.755Z,1513246342.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:22.770Z,1513246342.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:22.817Z,1513246342.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:23.156Z,1513246343.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:23.175Z,1513246343.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:23.221Z,1513246343.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:23.554Z,1513246343.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:23.582Z,1513246343.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:24.017Z,1513246344.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:24.813Z,1513246344.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:25.217Z,1513246345.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:26.013Z,1513246346.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:26.810Z,1513246346.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:27.202Z,1513246347.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:27.213Z,1513246347.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:27.220Z,1513246347.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:27.316Z,1513246347.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:27.358Z,1513246347.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:27.682Z,1513246347.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:27.711Z,1513246347.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:28.010Z,1513246348.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:28.092Z,1513246348.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:28.107Z,1513246348.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:28.482Z,1513246348.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:28.508Z,1513246348.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:28.805Z,1513246348.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:28.872Z,1513246348.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:28.899Z,1513246348.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:29.209Z,1513246349.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:29.279Z,1513246349.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:29.295Z,1513246349.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:29.678Z,1513246349.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:29.693Z,1513246349.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:30.009Z,1513246350.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:30.080Z,1513246350.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:30.103Z,1513246350.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:30.477Z,1513246350.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:30.492Z,1513246350.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:30.807Z,1513246350.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:30.886Z,1513246350.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:30.901Z,1513246350.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:31.213Z,1513246351.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:31.286Z,1513246351.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:31.301Z,1513246351.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:31.686Z,1513246351.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:31.701Z,1513246351.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:32.010Z,1513246352.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:32.082Z,1513246352.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:32.097Z,1513246352.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:32.479Z,1513246352.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:32.495Z,1513246352.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:32.801Z,1513246352.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:32.872Z,1513246352.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:32.923Z,1513246352.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:33.278Z,1513246353.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:33.293Z,1513246353.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:33.598Z,1513246353.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:33.686Z,1513246353.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:33.701Z,1513246353.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:34.087Z,1513246354.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:34.150Z,1513246354.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:34.395Z,1513246354.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:34.491Z,1513246354.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:34.506Z,1513246354.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:34.809Z,1513246354.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:34.879Z,1513246354.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:34.896Z,1513246354.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:35.280Z,1513246355.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:35.338Z,1513246355.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:35.605Z,1513246355.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:35.671Z,1513246355.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:35.692Z,1513246355.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:36.077Z,1513246356.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:36.127Z,1513246356.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:36.403Z,1513246356.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:36.484Z,1513246356.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:36.503Z,1513246356.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:36.817Z,1513246356.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:36.894Z,1513246356.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:36.916Z,1513246356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:37.291Z,1513246357.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:37.305Z,1513246357.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:37.613Z,1513246357.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:37.682Z,1513246357.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:37.715Z,1513246357.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:38.072Z,1513246358.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:38.098Z,1513246358.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:38.412Z,1513246358.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:38.470Z,1513246358.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:38.511Z,1513246358.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:38.817Z,1513246358.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:38.870Z,1513246358.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:38.898Z,1513246358.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:39.269Z,1513246359.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:39.296Z,1513246359.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:39.614Z,1513246359.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:39.690Z,1513246359.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:39.710Z,1513246359.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:40.081Z,1513246360.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:40.109Z,1513246360.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:40.411Z,1513246360.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:40.503Z,1513246360.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:40.531Z,1513246360.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:40.871Z,1513246360.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:40.877Z,1513246360.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:40.900Z,1513246360.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:41.271Z,1513246361.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:41.286Z,1513246361.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:41.674Z,1513246361.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:41.678Z,1513246361.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:41.710Z,1513246361.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:42.075Z,1513246362.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:42.090Z,1513246362.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:42.469Z,1513246362.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:42.473Z,1513246362.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:42.488Z,1513246362.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:42.907Z,1513246362.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:42.931Z,1513246362.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:43.170Z,1513246363.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:43.289Z,1513246363.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:43.323Z,1513246363.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:43.669Z,1513246363.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:43.684Z,1513246363.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:43.965Z,1513246363.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:44.076Z,1513246364.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:44.095Z,1513246364.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:44.476Z,1513246364.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:44.569Z,1513246364.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:44.762Z,1513246364.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:44.877Z,1513246364.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:44.892Z,1513246364.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:45.169Z,1513246365.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:45.278Z,1513246365.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:45.293Z,1513246365.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:45.681Z,1513246365.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:45.696Z,1513246365.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:45.965Z,1513246365.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:46.084Z,1513246366.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:46.135Z,1513246366.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:46.480Z,1513246366.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:46.504Z,1513246366.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:46.761Z,1513246366.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:46.871Z,1513246366.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:46.894Z,1513246366.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:47.165Z,1513246367.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:47.277Z,1513246367.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:47.292Z,1513246367.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:47.680Z,1513246367.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:47.696Z,1513246367.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:47.965Z,1513246367.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:48.076Z,1513246368.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:48.099Z,1513246368.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:48.486Z,1513246368.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:48.501Z,1513246368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:48.763Z,1513246368.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:48.884Z,1513246368.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:48.908Z,1513246368.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:49.169Z,1513246369.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:49.292Z,1513246369.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:49.311Z,1513246369.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:49.689Z,1513246369.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:49.703Z,1513246369.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:49.966Z,1513246369.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:50.070Z,1513246370.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:50.099Z,1513246370.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:50.467Z,1513246370.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:50.493Z,1513246370.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:50.761Z,1513246370.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:50.868Z,1513246370.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:50.913Z,1513246370.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:51.165Z,1513246371.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:51.272Z,1513246371.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:51.300Z,1513246371.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:51.660Z,1513246371.660 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:12:51.660Z,1513246371.660 [NAL9602] Data Fault, FailCount= 3
2017-12-14T10:12:51.660Z,1513246371.660 [NAL9602](ERROR): Data Fault
2017-12-14T10:12:51.677Z,1513246371.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:51.699Z,1513246371.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:51.750Z,1513246371.750 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:12:51.962Z,1513246371.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:52.055Z,1513246372.055 [NAL9602](INFO): Powering down
2017-12-14T10:12:52.086Z,1513246372.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:52.102Z,1513246372.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:52.484Z,1513246372.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:52.535Z,1513246372.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:52.757Z,1513246372.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:52.874Z,1513246372.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:52.890Z,1513246372.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:52.904Z,1513246372.904 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:12:52.904Z,1513246372.904 [NAL9602] No Fault, FailCount= 3
2017-12-14T10:12:53.161Z,1513246373.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:53.274Z,1513246373.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:53.289Z,1513246373.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:53.672Z,1513246373.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:53.693Z,1513246373.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:53.957Z,1513246373.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:54.079Z,1513246374.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:54.094Z,1513246374.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:54.503Z,1513246374.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:54.530Z,1513246374.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:54.753Z,1513246374.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:54.876Z,1513246374.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:54.891Z,1513246374.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:55.157Z,1513246375.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:55.274Z,1513246375.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:55.307Z,1513246375.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:55.719Z,1513246375.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:55.743Z,1513246375.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:55.954Z,1513246375.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:56.075Z,1513246376.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:56.091Z,1513246376.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:56.475Z,1513246376.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:56.508Z,1513246376.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:56.751Z,1513246376.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:56.895Z,1513246376.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:56.944Z,1513246376.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:57.161Z,1513246377.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:57.280Z,1513246377.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:57.296Z,1513246377.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:57.675Z,1513246377.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:57.731Z,1513246377.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:57.957Z,1513246377.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:58.064Z,1513246378.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:58.089Z,1513246378.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:58.478Z,1513246378.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:58.538Z,1513246378.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:58.755Z,1513246378.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:58.916Z,1513246378.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:58.947Z,1513246378.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:59.161Z,1513246379.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:59.267Z,1513246379.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:59.299Z,1513246379.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:59.671Z,1513246379.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:12:59.698Z,1513246379.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:12:59.957Z,1513246379.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:00.066Z,1513246380.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:00.095Z,1513246380.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:00.466Z,1513246380.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:00.491Z,1513246380.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:00.753Z,1513246380.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:00.867Z,1513246380.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:00.892Z,1513246380.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:01.157Z,1513246381.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:01.266Z,1513246381.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:01.292Z,1513246381.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:01.660Z,1513246381.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:01.687Z,1513246381.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:01.954Z,1513246381.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:02.076Z,1513246382.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:02.116Z,1513246382.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:02.466Z,1513246382.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:02.484Z,1513246382.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:02.749Z,1513246382.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:02.874Z,1513246382.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:02.894Z,1513246382.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:03.165Z,1513246383.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:03.274Z,1513246383.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:03.289Z,1513246383.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:03.675Z,1513246383.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:03.695Z,1513246383.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:03.961Z,1513246383.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:04.074Z,1513246384.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:04.088Z,1513246384.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:04.475Z,1513246384.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:04.495Z,1513246384.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:04.759Z,1513246384.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:04.874Z,1513246384.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:04.889Z,1513246384.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:05.165Z,1513246385.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:05.304Z,1513246385.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:05.336Z,1513246385.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:05.675Z,1513246385.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:05.690Z,1513246385.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:05.965Z,1513246385.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:06.079Z,1513246386.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:06.094Z,1513246386.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:06.477Z,1513246386.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:06.491Z,1513246386.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:06.764Z,1513246386.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:06.870Z,1513246386.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:06.922Z,1513246386.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:07.169Z,1513246387.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:07.270Z,1513246387.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:07.300Z,1513246387.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:07.678Z,1513246387.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:07.693Z,1513246387.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:07.966Z,1513246387.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:08.084Z,1513246388.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:08.099Z,1513246388.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:08.548Z,1513246388.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:08.580Z,1513246388.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:08.762Z,1513246388.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:08.870Z,1513246388.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:08.907Z,1513246388.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:09.165Z,1513246389.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:09.270Z,1513246389.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:09.306Z,1513246389.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:09.670Z,1513246389.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:09.697Z,1513246389.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:09.961Z,1513246389.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:10.065Z,1513246390.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:10.096Z,1513246390.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:10.471Z,1513246390.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:10.500Z,1513246390.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:10.758Z,1513246390.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:10.887Z,1513246390.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:10.903Z,1513246390.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:11.161Z,1513246391.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:11.266Z,1513246391.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:11.292Z,1513246391.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:11.671Z,1513246391.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:11.717Z,1513246391.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:11.958Z,1513246391.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:12.067Z,1513246392.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:12.101Z,1513246392.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:12.466Z,1513246392.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:12.496Z,1513246392.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:12.755Z,1513246392.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:12.867Z,1513246392.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:12.898Z,1513246392.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:13.161Z,1513246393.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:13.266Z,1513246393.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:13.298Z,1513246393.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:13.671Z,1513246393.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:13.697Z,1513246393.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:13.957Z,1513246393.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:14.071Z,1513246394.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:14.103Z,1513246394.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:14.466Z,1513246394.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:14.491Z,1513246394.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:14.753Z,1513246394.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:14.910Z,1513246394.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:14.952Z,1513246394.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:15.157Z,1513246395.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:15.267Z,1513246395.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:15.299Z,1513246395.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:15.670Z,1513246395.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:15.705Z,1513246395.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:15.953Z,1513246395.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:16.069Z,1513246396.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:16.083Z,1513246396.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:16.467Z,1513246396.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:16.484Z,1513246396.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:16.749Z,1513246396.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:16.871Z,1513246396.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:16.886Z,1513246396.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:17.153Z,1513246397.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:17.275Z,1513246397.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:17.290Z,1513246397.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:17.674Z,1513246397.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:17.735Z,1513246397.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:17.950Z,1513246397.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:18.122Z,1513246398.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:18.200Z,1513246398.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:18.472Z,1513246398.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:18.498Z,1513246398.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:18.746Z,1513246398.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:18.870Z,1513246398.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:18.927Z,1513246398.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:19.149Z,1513246399.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:19.275Z,1513246399.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:19.291Z,1513246399.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:19.675Z,1513246399.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:19.690Z,1513246399.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:19.947Z,1513246399.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:20.076Z,1513246400.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:20.131Z,1513246400.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:20.475Z,1513246400.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:20.490Z,1513246400.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:20.741Z,1513246400.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:20.870Z,1513246400.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:20.921Z,1513246400.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:21.146Z,1513246401.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:21.278Z,1513246401.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:21.293Z,1513246401.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:21.675Z,1513246401.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:21.695Z,1513246401.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:21.941Z,1513246401.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:22.073Z,1513246402.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:22.087Z,1513246402.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:22.486Z,1513246402.486 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:13:22.507Z,1513246402.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:22.541Z,1513246402.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:22.545Z,1513246402.545 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T10:08:22.5Z
2017-12-14T10:13:22.545Z,1513246402.545 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:13:22.545Z,1513246402.545 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:13:22.737Z,1513246402.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:22.871Z,1513246402.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:22.893Z,1513246402.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:23.141Z,1513246403.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:23.642Z,1513246403.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:23.656Z,1513246403.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:23.763Z,1513246403.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:23.808Z,1513246403.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:23.938Z,1513246403.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:24.735Z,1513246404.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:25.165Z,1513246405.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:25.961Z,1513246405.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:26.758Z,1513246406.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:27.165Z,1513246407.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:27.304Z,1513246407.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:27.319Z,1513246407.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:27.397Z,1513246407.397 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0224.lzma
2017-12-14T10:13:27.418Z,1513246407.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:27.463Z,1513246407.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:27.795Z,1513246407.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:27.855Z,1513246407.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:27.962Z,1513246407.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:28.171Z,1513246408.171 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0224.lzma.bak
2017-12-14T10:13:28.172Z,1513246408.172 [DataOverHttps](INFO): SBD MOMSN=5438490
2017-12-14T10:13:28.214Z,1513246408.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:28.228Z,1513246408.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:28.758Z,1513246408.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:29.161Z,1513246409.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:29.424Z,1513246409.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:29.474Z,1513246409.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:29.579Z,1513246409.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:29.604Z,1513246409.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:29.958Z,1513246409.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:30.753Z,1513246410.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:31.158Z,1513246411.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:31.953Z,1513246411.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:32.749Z,1513246412.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:33.153Z,1513246413.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:33.184Z,1513246413.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:33.211Z,1513246413.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:33.322Z,1513246413.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:33.354Z,1513246413.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:33.649Z,1513246413.649 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:13:33.666Z,1513246413.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:33.680Z,1513246413.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:33.949Z,1513246413.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:34.067Z,1513246414.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:34.082Z,1513246414.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:34.477Z,1513246414.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:34.511Z,1513246414.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:34.746Z,1513246414.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:34.887Z,1513246414.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:34.922Z,1513246414.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:35.149Z,1513246415.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:35.946Z,1513246415.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:36.741Z,1513246416.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:37.146Z,1513246417.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:37.942Z,1513246417.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:38.300Z,1513246418.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:38.316Z,1513246418.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:38.398Z,1513246418.398 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0225.lzma
2017-12-14T10:13:38.419Z,1513246418.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:38.466Z,1513246418.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:38.739Z,1513246418.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:38.798Z,1513246418.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:38.837Z,1513246418.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:39.144Z,1513246419.144 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0225.lzma.bak
2017-12-14T10:13:39.144Z,1513246419.144 [DataOverHttps](INFO): SBD MOMSN=5438492
2017-12-14T10:13:39.149Z,1513246419.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:39.188Z,1513246419.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:39.220Z,1513246419.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:39.946Z,1513246419.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:40.339Z,1513246420.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:40.410Z,1513246420.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:40.418Z,1513246420.418 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:13:40.418Z,1513246420.418 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:13:40.418Z,1513246420.418 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:13:40.520Z,1513246420.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:40.555Z,1513246420.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:40.744Z,1513246420.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:41.153Z,1513246421.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:41.950Z,1513246421.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:42.747Z,1513246422.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:43.149Z,1513246423.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:43.947Z,1513246423.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:43.953Z,1513246423.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:44.016Z,1513246424.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:44.123Z,1513246424.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:44.167Z,1513246424.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:44.496Z,1513246424.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:44.515Z,1513246424.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:44.741Z,1513246424.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:44.883Z,1513246424.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:44.916Z,1513246424.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:45.146Z,1513246425.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:45.278Z,1513246425.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:45.342Z,1513246425.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:45.680Z,1513246425.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:45.708Z,1513246425.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:45.941Z,1513246425.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:46.086Z,1513246426.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:46.131Z,1513246426.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:46.486Z,1513246426.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:46.501Z,1513246426.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:46.737Z,1513246426.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:46.894Z,1513246426.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:46.934Z,1513246426.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:47.157Z,1513246427.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:47.279Z,1513246427.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:47.306Z,1513246427.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:47.674Z,1513246427.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:47.700Z,1513246427.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:47.954Z,1513246427.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:48.076Z,1513246428.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:48.104Z,1513246428.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:48.475Z,1513246428.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:48.489Z,1513246428.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:48.749Z,1513246428.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:48.889Z,1513246428.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:48.924Z,1513246428.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:49.153Z,1513246429.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:49.306Z,1513246429.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:49.327Z,1513246429.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:49.706Z,1513246429.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:49.721Z,1513246429.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:49.949Z,1513246429.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:50.072Z,1513246430.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:50.088Z,1513246430.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:50.489Z,1513246430.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:50.532Z,1513246430.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:50.746Z,1513246430.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:50.910Z,1513246430.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:50.926Z,1513246430.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:51.149Z,1513246431.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:51.284Z,1513246431.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:51.319Z,1513246431.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:51.682Z,1513246431.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:51.696Z,1513246431.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:51.946Z,1513246431.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:52.089Z,1513246432.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:52.104Z,1513246432.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:52.493Z,1513246432.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:52.508Z,1513246432.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:52.744Z,1513246432.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:52.906Z,1513246432.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:52.931Z,1513246432.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:53.153Z,1513246433.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:53.315Z,1513246433.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:53.331Z,1513246433.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:53.673Z,1513246433.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:53.696Z,1513246433.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:53.950Z,1513246433.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:54.086Z,1513246434.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:54.101Z,1513246434.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:54.485Z,1513246434.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:54.530Z,1513246434.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:54.748Z,1513246434.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:54.902Z,1513246434.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:54.935Z,1513246434.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:55.153Z,1513246435.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:55.289Z,1513246435.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:55.308Z,1513246435.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:55.698Z,1513246435.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:55.777Z,1513246435.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:55.950Z,1513246435.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:56.082Z,1513246436.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:56.100Z,1513246436.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:56.536Z,1513246436.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:56.556Z,1513246436.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:56.773Z,1513246436.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:56.899Z,1513246436.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:56.916Z,1513246436.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:57.177Z,1513246437.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:57.276Z,1513246437.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:57.306Z,1513246437.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:57.675Z,1513246437.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:57.705Z,1513246437.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:57.973Z,1513246437.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:58.096Z,1513246438.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:58.115Z,1513246438.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:58.498Z,1513246438.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:58.513Z,1513246438.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:58.769Z,1513246438.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:58.890Z,1513246438.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:58.923Z,1513246438.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:59.173Z,1513246439.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:59.314Z,1513246439.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:59.329Z,1513246439.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:59.679Z,1513246439.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:13:59.751Z,1513246439.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:13:59.970Z,1513246439.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:00.085Z,1513246440.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:00.100Z,1513246440.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:00.481Z,1513246440.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:00.495Z,1513246440.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:00.765Z,1513246440.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:00.897Z,1513246440.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:00.928Z,1513246440.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:01.169Z,1513246441.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:01.289Z,1513246441.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:01.304Z,1513246441.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:01.690Z,1513246441.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:01.711Z,1513246441.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:02.001Z,1513246442.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:02.083Z,1513246442.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:02.104Z,1513246442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:02.484Z,1513246442.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:02.503Z,1513246442.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:02.789Z,1513246442.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:02.934Z,1513246442.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:02.982Z,1513246442.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:03.293Z,1513246443.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:03.308Z,1513246443.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:03.586Z,1513246443.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:03.690Z,1513246443.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:03.704Z,1513246443.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:04.095Z,1513246444.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:04.115Z,1513246444.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:04.381Z,1513246444.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:04.508Z,1513246444.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:04.543Z,1513246444.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:04.870Z,1513246444.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:04.894Z,1513246444.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:04.914Z,1513246444.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:05.289Z,1513246445.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:05.304Z,1513246445.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:05.666Z,1513246445.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:05.690Z,1513246445.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:05.765Z,1513246445.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:06.129Z,1513246446.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:06.188Z,1513246446.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:06.463Z,1513246446.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:06.487Z,1513246446.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:06.535Z,1513246446.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:06.890Z,1513246446.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:06.918Z,1513246446.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:07.130Z,1513246447.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:07.301Z,1513246447.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:07.316Z,1513246447.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:07.701Z,1513246447.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:07.751Z,1513246447.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:07.925Z,1513246447.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:08.079Z,1513246448.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:08.111Z,1513246448.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:08.518Z,1513246448.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:08.559Z,1513246448.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:08.728Z,1513246448.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:08.875Z,1513246448.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:08.914Z,1513246448.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:09.137Z,1513246449.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:09.309Z,1513246449.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:09.336Z,1513246449.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:09.691Z,1513246449.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:09.725Z,1513246449.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:09.934Z,1513246449.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:10.093Z,1513246450.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:10.124Z,1513246450.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:10.493Z,1513246450.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:10.508Z,1513246450.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:10.730Z,1513246450.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:10.898Z,1513246450.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:10.929Z,1513246450.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:11.284Z,1513246451.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:11.299Z,1513246451.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:11.525Z,1513246451.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:11.676Z,1513246451.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:11.697Z,1513246451.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:12.087Z,1513246452.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:12.102Z,1513246452.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:12.321Z,1513246452.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:12.478Z,1513246452.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:12.547Z,1513246452.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:12.939Z,1513246452.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:13.052Z,1513246453.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:13.118Z,1513246453.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:13.299Z,1513246453.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:13.319Z,1513246453.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:13.703Z,1513246453.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:13.717Z,1513246453.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:13.913Z,1513246453.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:14.075Z,1513246454.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:14.213Z,1513246454.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:14.479Z,1513246454.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:14.511Z,1513246454.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:14.710Z,1513246454.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:14.875Z,1513246454.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:14.908Z,1513246454.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:15.274Z,1513246455.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:15.308Z,1513246455.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:15.505Z,1513246455.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:15.698Z,1513246455.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:15.737Z,1513246455.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:16.114Z,1513246456.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:16.129Z,1513246456.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:16.302Z,1513246456.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:16.489Z,1513246456.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:16.523Z,1513246456.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:16.893Z,1513246456.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:16.980Z,1513246456.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:17.099Z,1513246457.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:17.276Z,1513246457.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:17.291Z,1513246457.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:17.683Z,1513246457.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:17.719Z,1513246457.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:17.895Z,1513246457.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.094Z,1513246458.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.134Z,1513246458.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:18.353Z,1513246458.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.494Z,1513246458.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.544Z,1513246458.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:18.759Z,1513246458.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.930Z,1513246458.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:18.951Z,1513246458.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:19.168Z,1513246459.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:19.289Z,1513246459.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:19.311Z,1513246459.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:19.573Z,1513246459.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:19.690Z,1513246459.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:19.711Z,1513246459.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:19.977Z,1513246459.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:20.089Z,1513246460.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:20.111Z,1513246460.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:20.487Z,1513246460.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:20.501Z,1513246460.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:20.774Z,1513246460.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:20.858Z,1513246460.858 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T10:14:20.858Z,1513246460.858 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T10:14:20.858Z,1513246460.858 [DropWeight](ERROR): Hardware Fault
2017-12-14T10:14:20.882Z,1513246460.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:20.926Z,1513246460.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:20.938Z,1513246460.938 [CBIT](INFO): Critical error at 20171214T101420
2017-12-14T10:14:20.940Z,1513246460.940 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T10:14:20.941Z,1513246460.941 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T10:14:21.177Z,1513246461.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:21.284Z,1513246461.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:21.303Z,1513246461.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:21.316Z,1513246461.316 [CBIT](INFO): Critical error at 20171214T101420
2017-12-14T10:14:21.683Z,1513246461.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:21.706Z,1513246461.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:21.977Z,1513246461.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:22.101Z,1513246462.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:22.137Z,1513246462.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:22.498Z,1513246462.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:22.519Z,1513246462.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:22.777Z,1513246462.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:22.893Z,1513246462.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:22.912Z,1513246462.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:23.181Z,1513246463.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:23.275Z,1513246463.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:23.311Z,1513246463.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:23.675Z,1513246463.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:23.710Z,1513246463.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:23.978Z,1513246463.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:24.080Z,1513246464.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:24.110Z,1513246464.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:24.482Z,1513246464.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:24.517Z,1513246464.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:24.773Z,1513246464.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:24.890Z,1513246464.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:24.915Z,1513246464.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:25.177Z,1513246465.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:25.309Z,1513246465.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:25.336Z,1513246465.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:25.699Z,1513246465.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:25.725Z,1513246465.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:25.973Z,1513246465.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:26.081Z,1513246466.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:26.099Z,1513246466.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:26.490Z,1513246466.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:26.524Z,1513246466.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:26.769Z,1513246466.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:26.890Z,1513246466.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:26.914Z,1513246466.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:27.173Z,1513246467.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:27.282Z,1513246467.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:27.297Z,1513246467.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:27.682Z,1513246467.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:27.696Z,1513246467.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:27.969Z,1513246467.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:28.090Z,1513246468.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:28.129Z,1513246468.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:28.519Z,1513246468.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:28.543Z,1513246468.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:28.765Z,1513246468.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:28.897Z,1513246468.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:28.951Z,1513246468.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:29.169Z,1513246469.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:29.286Z,1513246469.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:29.346Z,1513246469.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:29.688Z,1513246469.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:29.707Z,1513246469.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:29.968Z,1513246469.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:30.083Z,1513246470.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:30.127Z,1513246470.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:30.484Z,1513246470.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:30.500Z,1513246470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:30.761Z,1513246470.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:30.888Z,1513246470.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:30.938Z,1513246470.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:31.165Z,1513246471.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:31.290Z,1513246471.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:31.304Z,1513246471.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:31.705Z,1513246471.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:31.745Z,1513246471.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:31.961Z,1513246471.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:32.086Z,1513246472.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:32.100Z,1513246472.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:32.497Z,1513246472.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:32.520Z,1513246472.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:32.757Z,1513246472.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:32.879Z,1513246472.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:32.907Z,1513246472.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:33.161Z,1513246473.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:33.287Z,1513246473.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:33.303Z,1513246473.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:33.682Z,1513246473.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:33.697Z,1513246473.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:33.958Z,1513246473.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:34.098Z,1513246474.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:34.113Z,1513246474.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:34.498Z,1513246474.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:34.519Z,1513246474.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:34.754Z,1513246474.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:34.915Z,1513246474.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:34.954Z,1513246474.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:35.157Z,1513246475.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:35.275Z,1513246475.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:35.299Z,1513246475.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:35.674Z,1513246475.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:35.706Z,1513246475.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:35.954Z,1513246475.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:36.088Z,1513246476.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:36.102Z,1513246476.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:36.490Z,1513246476.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:36.504Z,1513246476.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:36.750Z,1513246476.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:36.894Z,1513246476.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:36.909Z,1513246476.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:37.153Z,1513246477.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:37.297Z,1513246477.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:37.312Z,1513246477.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:37.689Z,1513246477.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:37.704Z,1513246477.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:37.949Z,1513246477.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:38.091Z,1513246478.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:38.118Z,1513246478.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:38.479Z,1513246478.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:38.511Z,1513246478.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:38.746Z,1513246478.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:38.889Z,1513246478.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:38.919Z,1513246478.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:39.149Z,1513246479.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:39.280Z,1513246479.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:39.327Z,1513246479.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:39.681Z,1513246479.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:39.719Z,1513246479.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:39.719Z,1513246479.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194
2017-12-14T10:14:39.719Z,1513246479.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:14:39.721Z,1513246479.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:39.721Z,1513246479.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 194
2017-12-14T10:14:39.721Z,1513246479.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:14:39.723Z,1513246479.723 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:39.723Z,1513246479.723 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194
2017-12-14T10:14:39.723Z,1513246479.723 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:14:39.735Z,1513246479.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:14:39.735Z,1513246479.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:14:39.736Z,1513246479.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:14:39.946Z,1513246479.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:40.088Z,1513246480.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:40.113Z,1513246480.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:14:40.113Z,1513246480.113 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194
2017-12-14T10:14:40.113Z,1513246480.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:14:40.114Z,1513246480.114 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 194
2017-12-14T10:14:40.114Z,1513246480.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:14:40.114Z,1513246480.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194
2017-12-14T10:14:40.494Z,1513246480.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:40.507Z,1513246480.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:14:40.508Z,1513246480.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:14:40.508Z,1513246480.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:14:40.508Z,1513246480.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:14:40.509Z,1513246480.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:14:40.509Z,1513246480.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:14:40.510Z,1513246480.510 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:14:40.510Z,1513246480.510 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:14:40.510Z,1513246480.510 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:14:40.741Z,1513246480.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:40.894Z,1513246480.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:40.909Z,1513246480.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:41.146Z,1513246481.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:41.942Z,1513246481.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:42.738Z,1513246482.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:43.141Z,1513246483.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:43.938Z,1513246483.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:44.310Z,1513246484.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:44.341Z,1513246484.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:44.516Z,1513246484.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:44.567Z,1513246484.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:44.734Z,1513246484.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:44.893Z,1513246484.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:44.917Z,1513246484.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:45.138Z,1513246485.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:45.293Z,1513246485.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:45.320Z,1513246485.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:45.683Z,1513246485.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:45.698Z,1513246485.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:45.934Z,1513246485.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:46.080Z,1513246486.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:46.095Z,1513246486.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:46.496Z,1513246486.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:46.531Z,1513246486.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:46.729Z,1513246486.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:46.880Z,1513246486.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:46.903Z,1513246486.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:47.133Z,1513246487.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:47.282Z,1513246487.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:47.316Z,1513246487.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:47.706Z,1513246487.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:47.736Z,1513246487.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:47.929Z,1513246487.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:48.086Z,1513246488.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:48.110Z,1513246488.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:48.491Z,1513246488.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:48.506Z,1513246488.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:48.729Z,1513246488.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:48.891Z,1513246488.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:48.907Z,1513246488.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:49.137Z,1513246489.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:49.277Z,1513246489.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:49.306Z,1513246489.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:49.680Z,1513246489.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:49.694Z,1513246489.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:49.934Z,1513246489.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:50.075Z,1513246490.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:50.111Z,1513246490.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:50.482Z,1513246490.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:50.502Z,1513246490.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:50.731Z,1513246490.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:50.895Z,1513246490.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:50.940Z,1513246490.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:51.141Z,1513246491.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:51.285Z,1513246491.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:51.315Z,1513246491.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:51.714Z,1513246491.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:51.835Z,1513246491.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:51.938Z,1513246491.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:52.076Z,1513246492.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:52.090Z,1513246492.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:52.471Z,1513246492.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:52.523Z,1513246492.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:52.733Z,1513246492.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:52.876Z,1513246492.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:52.896Z,1513246492.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:53.138Z,1513246493.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:53.276Z,1513246493.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:53.330Z,1513246493.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:53.676Z,1513246493.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:53.699Z,1513246493.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:53.934Z,1513246493.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:54.091Z,1513246494.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:54.122Z,1513246494.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:54.493Z,1513246494.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:54.507Z,1513246494.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:54.729Z,1513246494.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:54.894Z,1513246494.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:54.908Z,1513246494.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:55.133Z,1513246495.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:55.282Z,1513246495.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:55.300Z,1513246495.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:55.685Z,1513246495.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:55.700Z,1513246495.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:55.930Z,1513246495.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:56.086Z,1513246496.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:56.100Z,1513246496.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:56.477Z,1513246496.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:56.500Z,1513246496.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:56.725Z,1513246496.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:56.893Z,1513246496.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:56.908Z,1513246496.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:57.129Z,1513246497.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:57.328Z,1513246497.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:57.347Z,1513246497.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:57.689Z,1513246497.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:57.711Z,1513246497.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:57.932Z,1513246497.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:58.070Z,1513246498.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:58.102Z,1513246498.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:58.491Z,1513246498.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:58.511Z,1513246498.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:58.727Z,1513246498.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:58.892Z,1513246498.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:58.911Z,1513246498.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:59.129Z,1513246499.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:59.282Z,1513246499.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:59.304Z,1513246499.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:59.672Z,1513246499.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:14:59.705Z,1513246499.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:14:59.925Z,1513246499.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:00.090Z,1513246500.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:00.105Z,1513246500.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:00.550Z,1513246500.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:00.596Z,1513246500.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:00.722Z,1513246500.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:00.894Z,1513246500.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:00.915Z,1513246500.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:01.125Z,1513246501.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:01.276Z,1513246501.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:01.303Z,1513246501.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:01.671Z,1513246501.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:01.712Z,1513246501.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:01.921Z,1513246501.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:02.076Z,1513246502.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:02.103Z,1513246502.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:02.470Z,1513246502.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:02.502Z,1513246502.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:02.719Z,1513246502.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:02.894Z,1513246502.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:02.923Z,1513246502.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:03.169Z,1513246503.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:03.296Z,1513246503.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:03.311Z,1513246503.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:03.721Z,1513246503.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:03.756Z,1513246503.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:03.966Z,1513246503.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:04.070Z,1513246504.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:04.108Z,1513246504.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:04.475Z,1513246504.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:04.507Z,1513246504.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:04.762Z,1513246504.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:04.871Z,1513246504.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:04.907Z,1513246504.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:05.165Z,1513246505.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:05.275Z,1513246505.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:05.308Z,1513246505.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:05.672Z,1513246505.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:05.704Z,1513246505.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:05.961Z,1513246505.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:06.087Z,1513246506.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:06.113Z,1513246506.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:06.486Z,1513246506.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:06.523Z,1513246506.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:06.757Z,1513246506.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:06.909Z,1513246506.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:06.953Z,1513246506.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:07.161Z,1513246507.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:07.276Z,1513246507.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:07.306Z,1513246507.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:07.679Z,1513246507.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:07.693Z,1513246507.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:07.957Z,1513246507.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:08.076Z,1513246508.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:08.103Z,1513246508.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:08.481Z,1513246508.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:08.496Z,1513246508.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:08.753Z,1513246508.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:08.898Z,1513246508.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:08.930Z,1513246508.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:09.160Z,1513246509.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:09.286Z,1513246509.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:09.300Z,1513246509.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:09.694Z,1513246509.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:09.708Z,1513246509.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:09.954Z,1513246509.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:10.112Z,1513246510.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:10.137Z,1513246510.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:10.482Z,1513246510.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:10.496Z,1513246510.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:10.749Z,1513246510.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:10.874Z,1513246510.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:10.903Z,1513246510.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:11.153Z,1513246511.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:11.287Z,1513246511.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:11.307Z,1513246511.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:11.683Z,1513246511.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:11.699Z,1513246511.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:11.949Z,1513246511.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:12.090Z,1513246512.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:12.104Z,1513246512.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:12.492Z,1513246512.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:12.515Z,1513246512.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:12.746Z,1513246512.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:12.889Z,1513246512.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:12.912Z,1513246512.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:13.149Z,1513246513.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:13.309Z,1513246513.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:13.403Z,1513246513.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:13.682Z,1513246513.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:13.764Z,1513246513.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:13.946Z,1513246513.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:14.075Z,1513246514.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:14.106Z,1513246514.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:14.483Z,1513246514.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:14.554Z,1513246514.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:14.741Z,1513246514.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:14.898Z,1513246514.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:14.914Z,1513246514.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:15.146Z,1513246515.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:15.296Z,1513246515.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:15.351Z,1513246515.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:15.682Z,1513246515.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:15.715Z,1513246515.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:15.942Z,1513246515.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:16.070Z,1513246516.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:16.106Z,1513246516.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:16.475Z,1513246516.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:16.543Z,1513246516.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:16.741Z,1513246516.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:16.871Z,1513246516.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:16.907Z,1513246516.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:17.149Z,1513246517.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:17.272Z,1513246517.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:17.296Z,1513246517.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:17.668Z,1513246517.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:17.684Z,1513246517.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:17.946Z,1513246517.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:18.091Z,1513246518.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:18.115Z,1513246518.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:18.493Z,1513246518.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:18.515Z,1513246518.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:18.743Z,1513246518.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:18.904Z,1513246518.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:18.920Z,1513246518.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:19.161Z,1513246519.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:19.277Z,1513246519.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:19.292Z,1513246519.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:19.733Z,1513246519.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:19.747Z,1513246519.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:19.957Z,1513246519.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:20.079Z,1513246520.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:20.094Z,1513246520.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:20.475Z,1513246520.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:20.495Z,1513246520.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:20.756Z,1513246520.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:20.894Z,1513246520.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:20.924Z,1513246520.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:21.161Z,1513246521.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:21.289Z,1513246521.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:21.303Z,1513246521.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:21.686Z,1513246521.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:21.700Z,1513246521.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:21.959Z,1513246521.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:22.081Z,1513246522.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:22.095Z,1513246522.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:22.479Z,1513246522.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:22.494Z,1513246522.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:22.753Z,1513246522.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:22.899Z,1513246522.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:22.943Z,1513246522.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:23.157Z,1513246523.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:23.280Z,1513246523.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:23.295Z,1513246523.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:23.678Z,1513246523.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:23.728Z,1513246523.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:23.954Z,1513246523.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:24.098Z,1513246524.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:24.129Z,1513246524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:24.488Z,1513246524.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:24.511Z,1513246524.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:24.749Z,1513246524.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:24.889Z,1513246524.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:24.906Z,1513246524.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:25.153Z,1513246525.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:25.283Z,1513246525.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:25.304Z,1513246525.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:25.679Z,1513246525.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:25.693Z,1513246525.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:25.949Z,1513246525.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:26.103Z,1513246526.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:26.143Z,1513246526.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:26.484Z,1513246526.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:26.503Z,1513246526.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:26.746Z,1513246526.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:26.885Z,1513246526.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:26.908Z,1513246526.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:27.149Z,1513246527.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:27.293Z,1513246527.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:27.308Z,1513246527.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:27.692Z,1513246527.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:27.708Z,1513246527.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:27.946Z,1513246527.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:28.083Z,1513246528.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:28.097Z,1513246528.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:28.500Z,1513246528.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:28.515Z,1513246528.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:28.741Z,1513246528.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:28.887Z,1513246528.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:28.907Z,1513246528.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:29.146Z,1513246529.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:29.307Z,1513246529.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:29.345Z,1513246529.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:29.678Z,1513246529.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:29.699Z,1513246529.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:29.942Z,1513246529.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:30.084Z,1513246530.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:30.100Z,1513246530.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:30.485Z,1513246530.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:30.499Z,1513246530.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:30.739Z,1513246530.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:30.907Z,1513246530.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:30.930Z,1513246530.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:31.145Z,1513246531.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:31.275Z,1513246531.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:31.294Z,1513246531.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:31.678Z,1513246531.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:31.706Z,1513246531.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:31.941Z,1513246531.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:32.080Z,1513246532.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:32.096Z,1513246532.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:32.508Z,1513246532.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:32.539Z,1513246532.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:32.739Z,1513246532.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:32.889Z,1513246532.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:32.904Z,1513246532.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:33.145Z,1513246533.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:33.299Z,1513246533.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:33.319Z,1513246533.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:33.695Z,1513246533.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:33.710Z,1513246533.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:33.942Z,1513246533.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:34.071Z,1513246534.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:34.103Z,1513246534.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:34.471Z,1513246534.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:34.505Z,1513246534.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:34.737Z,1513246534.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:34.871Z,1513246534.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:34.903Z,1513246534.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:35.141Z,1513246535.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:35.275Z,1513246535.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:35.302Z,1513246535.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:35.699Z,1513246535.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:35.787Z,1513246535.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:35.938Z,1513246535.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:36.102Z,1513246536.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:36.131Z,1513246536.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:36.486Z,1513246536.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:36.501Z,1513246536.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:36.733Z,1513246536.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:36.882Z,1513246536.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:36.930Z,1513246536.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:37.137Z,1513246537.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:37.281Z,1513246537.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:37.296Z,1513246537.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:37.681Z,1513246537.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:37.727Z,1513246537.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:37.933Z,1513246537.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:38.079Z,1513246538.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:38.093Z,1513246538.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:38.479Z,1513246538.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:38.499Z,1513246538.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:38.729Z,1513246538.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:38.882Z,1513246538.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:38.899Z,1513246538.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:39.133Z,1513246539.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:39.294Z,1513246539.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:39.315Z,1513246539.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:39.693Z,1513246539.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:39.708Z,1513246539.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:39.930Z,1513246539.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:40.087Z,1513246540.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:40.103Z,1513246540.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:40.468Z,1513246540.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:40.501Z,1513246540.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:40.727Z,1513246540.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:40.872Z,1513246540.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:40.904Z,1513246540.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:41.129Z,1513246541.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:41.273Z,1513246541.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:41.308Z,1513246541.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:41.925Z,1513246541.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:42.721Z,1513246542.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:43.125Z,1513246543.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:43.921Z,1513246543.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:44.723Z,1513246544.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:44.848Z,1513246544.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:44.864Z,1513246544.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:44.977Z,1513246544.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:45.011Z,1513246545.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:45.153Z,1513246545.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:45.331Z,1513246545.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:45.397Z,1513246545.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:45.744Z,1513246545.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:45.801Z,1513246545.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:45.949Z,1513246545.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:46.111Z,1513246546.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:46.131Z,1513246546.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:46.520Z,1513246546.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:46.535Z,1513246546.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:46.748Z,1513246546.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:46.918Z,1513246546.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:46.935Z,1513246546.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:47.153Z,1513246547.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:47.319Z,1513246547.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:47.340Z,1513246547.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:47.730Z,1513246547.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:47.744Z,1513246547.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:47.952Z,1513246547.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:48.123Z,1513246548.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:48.139Z,1513246548.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:48.524Z,1513246548.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:48.548Z,1513246548.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:48.746Z,1513246548.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:48.931Z,1513246548.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:48.951Z,1513246548.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:49.149Z,1513246549.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:49.321Z,1513246549.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:49.336Z,1513246549.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:49.728Z,1513246549.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:49.744Z,1513246549.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:49.946Z,1513246549.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:50.128Z,1513246550.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:50.142Z,1513246550.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:50.530Z,1513246550.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:50.545Z,1513246550.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:50.742Z,1513246550.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:50.922Z,1513246550.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:50.937Z,1513246550.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:51.146Z,1513246551.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:51.316Z,1513246551.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:51.347Z,1513246551.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:51.735Z,1513246551.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:51.759Z,1513246551.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:51.941Z,1513246551.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:52.129Z,1513246552.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:52.146Z,1513246552.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:52.532Z,1513246552.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:52.551Z,1513246552.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:52.737Z,1513246552.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:52.926Z,1513246552.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:52.958Z,1513246552.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:53.141Z,1513246553.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:53.316Z,1513246553.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:53.342Z,1513246553.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:53.710Z,1513246553.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:53.743Z,1513246553.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:53.937Z,1513246553.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:54.111Z,1513246554.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:54.138Z,1513246554.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:54.511Z,1513246554.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:54.535Z,1513246554.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:54.733Z,1513246554.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:54.960Z,1513246554.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:54.000Z,1513246555.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:55.137Z,1513246555.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:55.334Z,1513246555.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:55.355Z,1513246555.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:55.739Z,1513246555.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:55.759Z,1513246555.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:55.934Z,1513246555.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:56.111Z,1513246556.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:56.143Z,1513246556.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:56.510Z,1513246556.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:56.546Z,1513246556.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:56.729Z,1513246556.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:56.911Z,1513246556.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:56.942Z,1513246556.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:57.133Z,1513246557.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:57.315Z,1513246557.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:57.347Z,1513246557.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:57.710Z,1513246557.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:57.801Z,1513246557.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:57.932Z,1513246557.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:58.145Z,1513246558.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:58.173Z,1513246558.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:58.547Z,1513246558.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:58.606Z,1513246558.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:58.727Z,1513246558.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:58.948Z,1513246558.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:58.967Z,1513246558.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:59.142Z,1513246559.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:59.316Z,1513246559.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:59.363Z,1513246559.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:59.718Z,1513246559.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:15:59.733Z,1513246559.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:15:59.937Z,1513246559.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:00.118Z,1513246560.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:00.133Z,1513246560.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:00.527Z,1513246560.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:00.559Z,1513246560.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:00.736Z,1513246560.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:00.934Z,1513246560.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:00.959Z,1513246560.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:01.157Z,1513246561.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:01.373Z,1513246561.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:01.436Z,1513246561.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:01.722Z,1513246561.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:01.736Z,1513246561.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:01.955Z,1513246561.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:02.119Z,1513246562.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:02.133Z,1513246562.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:02.521Z,1513246562.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:02.539Z,1513246562.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:02.749Z,1513246562.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:02.923Z,1513246562.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:02.937Z,1513246562.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:03.153Z,1513246563.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:03.321Z,1513246563.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:03.336Z,1513246563.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:03.724Z,1513246563.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:03.740Z,1513246563.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:03.953Z,1513246563.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:04.134Z,1513246564.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:04.165Z,1513246564.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:04.525Z,1513246564.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:04.547Z,1513246564.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:04.749Z,1513246564.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:04.929Z,1513246564.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:04.951Z,1513246564.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:05.153Z,1513246565.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:05.323Z,1513246565.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:05.338Z,1513246565.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:05.729Z,1513246565.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:05.744Z,1513246565.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:05.949Z,1513246565.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:06.129Z,1513246566.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:06.144Z,1513246566.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:06.530Z,1513246566.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:06.551Z,1513246566.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:06.746Z,1513246566.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:06.916Z,1513246566.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:07.003Z,1513246567.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:07.149Z,1513246567.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:07.326Z,1513246567.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:07.341Z,1513246567.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:07.736Z,1513246567.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:07.787Z,1513246567.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:07.946Z,1513246567.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:08.133Z,1513246568.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:08.150Z,1513246568.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:08.532Z,1513246568.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:08.547Z,1513246568.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:08.742Z,1513246568.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:08.927Z,1513246568.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:08.950Z,1513246568.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:09.146Z,1513246569.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:09.316Z,1513246569.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:09.342Z,1513246569.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:09.709Z,1513246569.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:09.737Z,1513246569.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:09.942Z,1513246569.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:10.116Z,1513246570.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:10.147Z,1513246570.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:10.510Z,1513246570.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:10.539Z,1513246570.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:10.737Z,1513246570.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:10.926Z,1513246570.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:10.948Z,1513246570.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:11.141Z,1513246571.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:11.329Z,1513246571.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:11.355Z,1513246571.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:11.729Z,1513246571.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:11.752Z,1513246571.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:11.937Z,1513246571.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:12.105Z,1513246572.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:12.132Z,1513246572.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:12.518Z,1513246572.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:12.533Z,1513246572.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:12.735Z,1513246572.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:12.928Z,1513246572.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:12.948Z,1513246572.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:13.145Z,1513246573.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:13.320Z,1513246573.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:13.339Z,1513246573.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:13.729Z,1513246573.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:13.751Z,1513246573.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:13.942Z,1513246573.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:14.145Z,1513246574.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:14.184Z,1513246574.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:14.526Z,1513246574.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:14.553Z,1513246574.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:14.739Z,1513246574.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:14.919Z,1513246574.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:14.934Z,1513246574.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:15.145Z,1513246575.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:15.315Z,1513246575.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:15.342Z,1513246575.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:15.724Z,1513246575.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:15.739Z,1513246575.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:15.942Z,1513246575.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:16.130Z,1513246576.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:16.145Z,1513246576.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:16.538Z,1513246576.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:16.552Z,1513246576.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:16.737Z,1513246576.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:16.927Z,1513246576.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:16.958Z,1513246576.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:17.141Z,1513246577.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:17.327Z,1513246577.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:17.358Z,1513246577.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:17.710Z,1513246577.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:17.763Z,1513246577.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:17.938Z,1513246577.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:18.157Z,1513246578.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:18.173Z,1513246578.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:18.533Z,1513246578.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:18.568Z,1513246578.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:18.734Z,1513246578.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:18.928Z,1513246578.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:18.967Z,1513246578.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:19.138Z,1513246579.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:19.331Z,1513246579.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:19.422Z,1513246579.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:19.752Z,1513246579.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:19.775Z,1513246579.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:19.934Z,1513246579.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:20.133Z,1513246580.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:20.223Z,1513246580.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:20.550Z,1513246580.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:20.584Z,1513246580.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:20.730Z,1513246580.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:20.941Z,1513246580.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:21.020Z,1513246581.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:21.134Z,1513246581.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:21.320Z,1513246581.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:21.353Z,1513246581.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:21.731Z,1513246581.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:21.791Z,1513246581.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:21.930Z,1513246581.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:22.135Z,1513246582.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:22.156Z,1513246582.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:22.532Z,1513246582.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:22.555Z,1513246582.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:22.728Z,1513246582.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:22.944Z,1513246582.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:23.009Z,1513246583.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:23.133Z,1513246583.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:23.316Z,1513246583.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:23.360Z,1513246583.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:23.744Z,1513246583.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:23.780Z,1513246583.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:23.930Z,1513246583.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:24.128Z,1513246584.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:24.144Z,1513246584.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:24.536Z,1513246584.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:24.567Z,1513246584.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:24.726Z,1513246584.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:24.938Z,1513246584.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:24.966Z,1513246584.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:25.130Z,1513246585.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:25.315Z,1513246585.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:25.330Z,1513246585.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:25.723Z,1513246585.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:25.760Z,1513246585.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:25.926Z,1513246585.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:26.158Z,1513246586.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:26.179Z,1513246586.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:26.557Z,1513246586.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:26.571Z,1513246586.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:26.723Z,1513246586.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:26.942Z,1513246586.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:26.965Z,1513246586.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:27.129Z,1513246587.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:27.366Z,1513246587.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:27.414Z,1513246587.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:27.733Z,1513246587.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:27.766Z,1513246587.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:27.925Z,1513246587.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:28.145Z,1513246588.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:28.170Z,1513246588.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:28.522Z,1513246588.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:28.586Z,1513246588.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:28.727Z,1513246588.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:28.911Z,1513246588.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:28.975Z,1513246588.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:29.157Z,1513246589.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:29.313Z,1513246589.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:29.352Z,1513246589.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:29.711Z,1513246589.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:29.746Z,1513246589.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:29.954Z,1513246589.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:30.135Z,1513246590.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:30.222Z,1513246590.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:30.536Z,1513246590.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:30.592Z,1513246590.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:30.750Z,1513246590.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:30.932Z,1513246590.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:30.951Z,1513246590.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:31.154Z,1513246591.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:31.312Z,1513246591.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:31.381Z,1513246591.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:31.713Z,1513246591.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:31.795Z,1513246591.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:31.950Z,1513246591.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:32.113Z,1513246592.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:32.154Z,1513246592.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:32.521Z,1513246592.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:32.536Z,1513246592.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:32.746Z,1513246592.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:32.945Z,1513246592.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:32.968Z,1513246592.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:33.150Z,1513246593.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:33.328Z,1513246593.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:33.372Z,1513246593.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:33.723Z,1513246593.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:33.815Z,1513246593.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:33.946Z,1513246593.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:34.119Z,1513246594.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:34.173Z,1513246594.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:34.521Z,1513246594.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:34.540Z,1513246594.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:34.741Z,1513246594.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:34.937Z,1513246594.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:34.956Z,1513246594.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:35.146Z,1513246595.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:35.320Z,1513246595.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:35.344Z,1513246595.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:35.740Z,1513246595.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:35.784Z,1513246595.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:35.942Z,1513246595.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:36.134Z,1513246596.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:36.155Z,1513246596.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:36.536Z,1513246596.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:36.563Z,1513246596.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:36.738Z,1513246596.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:36.945Z,1513246596.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:36.986Z,1513246596.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:37.142Z,1513246597.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:37.347Z,1513246597.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:37.446Z,1513246597.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:37.732Z,1513246597.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:37.759Z,1513246597.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:37.938Z,1513246597.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:38.132Z,1513246598.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:38.160Z,1513246598.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:38.523Z,1513246598.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:38.567Z,1513246598.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:38.734Z,1513246598.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:38.920Z,1513246598.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:38.966Z,1513246598.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:39.138Z,1513246599.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:39.313Z,1513246599.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:39.332Z,1513246599.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:39.740Z,1513246599.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:39.801Z,1513246599.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:39.935Z,1513246599.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:40.133Z,1513246600.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:40.160Z,1513246600.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:40.532Z,1513246600.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:40.564Z,1513246600.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:40.731Z,1513246600.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:41.021Z,1513246601.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:41.066Z,1513246601.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:41.315Z,1513246601.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:41.342Z,1513246601.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:41.357Z,1513246601.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:42.138Z,1513246602.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:42.934Z,1513246602.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:43.338Z,1513246603.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:44.134Z,1513246604.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:44.830Z,1513246604.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:45.626Z,1513246605.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:46.422Z,1513246606.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:46.825Z,1513246606.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:46.915Z,1513246606.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:47.032Z,1513246607.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:47.142Z,1513246607.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:47.159Z,1513246607.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:47.499Z,1513246607.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:47.519Z,1513246607.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:47.622Z,1513246607.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:47.896Z,1513246607.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:47.911Z,1513246607.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:48.295Z,1513246608.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:48.312Z,1513246608.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:48.418Z,1513246608.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:48.688Z,1513246608.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:48.716Z,1513246608.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:48.821Z,1513246608.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:49.095Z,1513246609.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:49.157Z,1513246609.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:49.505Z,1513246609.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:49.520Z,1513246609.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:49.618Z,1513246609.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:49.902Z,1513246609.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:49.939Z,1513246609.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:50.299Z,1513246610.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:50.314Z,1513246610.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:50.414Z,1513246610.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:50.699Z,1513246610.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:50.727Z,1513246610.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:50.829Z,1513246610.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:51.087Z,1513246611.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:51.121Z,1513246611.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:51.489Z,1513246611.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:51.509Z,1513246611.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:51.625Z,1513246611.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:51.894Z,1513246611.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:51.910Z,1513246611.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:52.294Z,1513246612.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:52.314Z,1513246612.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:52.423Z,1513246612.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:52.704Z,1513246612.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:52.719Z,1513246612.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:52.849Z,1513246612.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:53.084Z,1513246613.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:53.119Z,1513246613.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:53.489Z,1513246613.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:53.522Z,1513246613.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:53.646Z,1513246613.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:53.891Z,1513246613.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:53.917Z,1513246613.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:54.294Z,1513246614.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:54.309Z,1513246614.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:54.441Z,1513246614.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:54.721Z,1513246614.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:54.787Z,1513246614.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:55.110Z,1513246615.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:55.124Z,1513246615.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:55.162Z,1513246615.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:55.506Z,1513246615.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:55.520Z,1513246615.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:55.903Z,1513246615.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:55.919Z,1513246615.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:55.957Z,1513246615.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:56.298Z,1513246616.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:56.314Z,1513246616.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:56.676Z,1513246616.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:56.754Z,1513246616.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:56.800Z,1513246616.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:57.092Z,1513246617.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:57.111Z,1513246617.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:57.157Z,1513246617.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:57.494Z,1513246617.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:57.508Z,1513246617.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:57.899Z,1513246617.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:57.916Z,1513246617.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:57.954Z,1513246617.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:58.305Z,1513246618.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:58.417Z,1513246618.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:58.691Z,1513246618.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:58.717Z,1513246618.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:58.750Z,1513246618.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:59.089Z,1513246619.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:59.104Z,1513246619.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:59.153Z,1513246619.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:59.484Z,1513246619.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:59.506Z,1513246619.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:59.883Z,1513246619.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:16:59.901Z,1513246619.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:16:59.950Z,1513246619.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:00.283Z,1513246620.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:00.310Z,1513246620.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:00.684Z,1513246620.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:00.725Z,1513246620.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:00.746Z,1513246620.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:01.101Z,1513246621.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:01.120Z,1513246621.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:01.149Z,1513246621.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:01.505Z,1513246621.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:01.527Z,1513246621.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:01.908Z,1513246621.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:01.922Z,1513246621.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:01.946Z,1513246621.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:02.291Z,1513246622.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:02.322Z,1513246622.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:02.684Z,1513246622.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:02.712Z,1513246622.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:02.742Z,1513246622.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:03.135Z,1513246623.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:03.146Z,1513246623.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:03.155Z,1513246623.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:03.493Z,1513246623.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:03.515Z,1513246623.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:03.888Z,1513246623.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:03.915Z,1513246623.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:03.942Z,1513246623.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:04.303Z,1513246624.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:04.317Z,1513246624.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:04.709Z,1513246624.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:04.731Z,1513246624.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:04.753Z,1513246624.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:05.088Z,1513246625.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:05.123Z,1513246625.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:05.158Z,1513246625.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:05.482Z,1513246625.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:05.516Z,1513246625.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:05.879Z,1513246625.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:05.921Z,1513246625.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:05.954Z,1513246625.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:06.309Z,1513246626.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:06.328Z,1513246626.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:06.690Z,1513246626.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:06.716Z,1513246626.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:06.750Z,1513246626.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:07.106Z,1513246627.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:07.127Z,1513246627.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:07.511Z,1513246627.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:07.526Z,1513246627.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:07.558Z,1513246627.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:07.894Z,1513246627.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:07.929Z,1513246627.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:08.281Z,1513246628.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:08.296Z,1513246628.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:08.353Z,1513246628.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:08.698Z,1513246628.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:08.769Z,1513246628.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:09.086Z,1513246629.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:09.107Z,1513246629.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:09.150Z,1513246629.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:09.490Z,1513246629.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:09.605Z,1513246629.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:09.899Z,1513246629.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:09.930Z,1513246629.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:09.946Z,1513246629.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:10.301Z,1513246630.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:10.379Z,1513246630.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:10.713Z,1513246630.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:10.744Z,1513246630.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:10.771Z,1513246630.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:11.095Z,1513246631.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:11.143Z,1513246631.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:11.501Z,1513246631.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:11.516Z,1513246631.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:11.541Z,1513246631.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:11.897Z,1513246631.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:11.947Z,1513246631.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:12.298Z,1513246632.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:12.314Z,1513246632.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:12.338Z,1513246632.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:12.689Z,1513246632.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:12.765Z,1513246632.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:13.099Z,1513246633.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:13.114Z,1513246633.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:13.133Z,1513246633.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:13.502Z,1513246633.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:13.517Z,1513246633.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:13.912Z,1513246633.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:13.927Z,1513246633.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:13.930Z,1513246633.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:14.300Z,1513246634.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:14.315Z,1513246634.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:14.683Z,1513246634.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:14.715Z,1513246634.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:14.726Z,1513246634.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:15.085Z,1513246635.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:15.116Z,1513246635.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:15.483Z,1513246635.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:15.521Z,1513246635.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:15.528Z,1513246635.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:15.912Z,1513246635.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:15.919Z,1513246635.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x6124 got:0x16897
2017-12-14T10:17:15.948Z,1513246635.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:16.302Z,1513246636.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:16.317Z,1513246636.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:16.320Z,1513246636.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:16.722Z,1513246636.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:16.736Z,1513246636.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:17.083Z,1513246637.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:17.114Z,1513246637.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:17.127Z,1513246637.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:17.487Z,1513246637.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:17.521Z,1513246637.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:17.883Z,1513246637.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:17.909Z,1513246637.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:17.920Z,1513246637.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:18.291Z,1513246638.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:18.312Z,1513246638.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:18.694Z,1513246638.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:18.706Z,1513246638.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:18.728Z,1513246638.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:19.124Z,1513246639.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:19.159Z,1513246639.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:19.496Z,1513246639.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:19.502Z,1513246639.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:19.528Z,1513246639.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:19.906Z,1513246639.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:19.931Z,1513246639.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:20.293Z,1513246640.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:20.298Z,1513246640.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:20.348Z,1513246640.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:20.696Z,1513246640.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:20.715Z,1513246640.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:21.094Z,1513246641.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:21.100Z,1513246641.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:21.116Z,1513246641.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:21.494Z,1513246641.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:21.508Z,1513246641.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:21.893Z,1513246641.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:21.903Z,1513246641.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:21.919Z,1513246641.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:22.327Z,1513246642.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:22.401Z,1513246642.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:22.691Z,1513246642.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:22.711Z,1513246642.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:22.767Z,1513246642.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:23.084Z,1513246643.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:23.110Z,1513246643.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:23.479Z,1513246643.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:23.485Z,1513246643.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:23.519Z,1513246643.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:23.872Z,1513246643.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:23.915Z,1513246643.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:24.283Z,1513246644.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:24.288Z,1513246644.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:24.325Z,1513246644.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:24.682Z,1513246644.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:24.767Z,1513246644.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:25.077Z,1513246645.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:25.107Z,1513246645.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:25.138Z,1513246645.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:25.530Z,1513246645.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:25.557Z,1513246645.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:25.882Z,1513246645.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:25.893Z,1513246645.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:25.937Z,1513246645.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:26.289Z,1513246646.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:26.305Z,1513246646.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:26.307Z,1513246646.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:26.686Z,1513246646.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:26.708Z,1513246646.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:26.710Z,1513246646.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.091Z,1513246647.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.107Z,1513246647.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:27.114Z,1513246647.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.509Z,1513246647.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.517Z,1513246647.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.543Z,1513246647.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:27.898Z,1513246647.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:27.913Z,1513246647.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:27.922Z,1513246647.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:28.305Z,1513246648.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:28.323Z,1513246648.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:28.326Z,1513246648.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:28.717Z,1513246648.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:28.729Z,1513246648.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:28.737Z,1513246648.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:29.094Z,1513246649.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:29.112Z,1513246649.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:29.134Z,1513246649.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:29.491Z,1513246649.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:29.507Z,1513246649.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:29.538Z,1513246649.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:29.897Z,1513246649.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:29.912Z,1513246649.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:29.941Z,1513246649.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:30.295Z,1513246650.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:30.316Z,1513246650.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:30.367Z,1513246650.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:30.704Z,1513246650.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:30.718Z,1513246650.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:30.785Z,1513246650.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:31.100Z,1513246651.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:31.122Z,1513246651.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:31.190Z,1513246651.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:31.498Z,1513246651.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:31.535Z,1513246651.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:31.943Z,1513246651.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:31.986Z,1513246651.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:32.053Z,1513246652.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:32.284Z,1513246652.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:32.326Z,1513246652.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:32.686Z,1513246652.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:32.713Z,1513246652.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:32.781Z,1513246652.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:33.082Z,1513246653.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:33.139Z,1513246653.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:33.185Z,1513246653.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:33.490Z,1513246653.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:33.505Z,1513246653.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:33.892Z,1513246653.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:33.942Z,1513246653.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:33.982Z,1513246653.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:34.297Z,1513246654.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:34.312Z,1513246654.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:34.701Z,1513246654.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:34.716Z,1513246654.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:34.777Z,1513246654.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:35.089Z,1513246655.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:35.141Z,1513246655.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:35.181Z,1513246655.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:35.482Z,1513246655.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:35.516Z,1513246655.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:35.874Z,1513246655.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:35.897Z,1513246655.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:35.977Z,1513246655.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:36.279Z,1513246656.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:36.319Z,1513246656.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:36.681Z,1513246656.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:36.774Z,1513246656.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:36.790Z,1513246656.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:37.097Z,1513246657.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:37.112Z,1513246657.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:37.177Z,1513246657.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:37.501Z,1513246657.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:37.516Z,1513246657.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:37.899Z,1513246657.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:37.913Z,1513246657.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:37.973Z,1513246657.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:38.295Z,1513246658.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:38.342Z,1513246658.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:38.738Z,1513246658.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:38.769Z,1513246658.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:38.799Z,1513246658.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:39.085Z,1513246659.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:39.119Z,1513246659.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:39.173Z,1513246659.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:39.479Z,1513246659.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:39.518Z,1513246659.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:39.906Z,1513246659.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:39.924Z,1513246659.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:39.970Z,1513246659.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:40.301Z,1513246660.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:40.315Z,1513246660.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:40.693Z,1513246660.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:40.723Z,1513246660.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:40.723Z,1513246660.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195
2017-12-14T10:17:40.723Z,1513246660.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:17:40.725Z,1513246660.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:40.725Z,1513246660.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 195
2017-12-14T10:17:40.725Z,1513246660.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:17:40.727Z,1513246660.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:40.727Z,1513246660.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195
2017-12-14T10:17:40.727Z,1513246660.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:17:40.739Z,1513246660.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:17:40.739Z,1513246660.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:17:40.739Z,1513246660.739 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:17:40.765Z,1513246660.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:41.089Z,1513246661.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:41.135Z,1513246661.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:17:41.135Z,1513246661.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195
2017-12-14T10:17:41.135Z,1513246661.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:17:41.135Z,1513246661.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 195
2017-12-14T10:17:41.136Z,1513246661.136 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:17:41.136Z,1513246661.136 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195
2017-12-14T10:17:41.170Z,1513246661.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:41.529Z,1513246661.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:41.560Z,1513246661.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:17:41.560Z,1513246661.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:17:41.560Z,1513246661.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:17:41.561Z,1513246661.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:17:41.562Z,1513246661.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:17:41.562Z,1513246661.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:17:41.562Z,1513246661.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:17:41.563Z,1513246661.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:17:41.563Z,1513246661.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:17:41.965Z,1513246661.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:42.761Z,1513246662.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:43.165Z,1513246663.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:43.962Z,1513246663.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:44.757Z,1513246664.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:45.071Z,1513246665.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:45.120Z,1513246665.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:45.161Z,1513246665.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:45.214Z,1513246665.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:45.258Z,1513246665.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:45.581Z,1513246665.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:45.615Z,1513246665.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:45.957Z,1513246665.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:46.002Z,1513246666.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:46.017Z,1513246666.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:46.454Z,1513246666.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:46.469Z,1513246666.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:46.753Z,1513246666.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:46.773Z,1513246666.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:46.788Z,1513246666.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:47.157Z,1513246667.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:47.181Z,1513246667.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:47.212Z,1513246667.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:47.574Z,1513246667.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:47.589Z,1513246667.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:47.953Z,1513246667.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:47.995Z,1513246667.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:48.031Z,1513246668.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:48.393Z,1513246668.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:48.500Z,1513246668.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:48.749Z,1513246668.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:48.786Z,1513246668.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:48.823Z,1513246668.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:49.153Z,1513246669.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:49.182Z,1513246669.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:49.197Z,1513246669.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:49.583Z,1513246669.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:49.598Z,1513246669.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:49.949Z,1513246669.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:49.968Z,1513246669.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:49.997Z,1513246669.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:50.383Z,1513246670.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:50.398Z,1513246670.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:50.748Z,1513246670.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:50.827Z,1513246670.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:50.842Z,1513246670.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:51.154Z,1513246671.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:51.192Z,1513246671.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:51.219Z,1513246671.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:51.597Z,1513246671.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:51.627Z,1513246671.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:51.949Z,1513246671.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:51.970Z,1513246671.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:51.993Z,1513246671.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:52.371Z,1513246672.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:52.407Z,1513246672.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:52.748Z,1513246672.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:52.788Z,1513246672.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:52.827Z,1513246672.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:53.177Z,1513246673.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:53.192Z,1513246673.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:53.217Z,1513246673.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:53.571Z,1513246673.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:53.588Z,1513246673.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:53.985Z,1513246673.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:54.014Z,1513246674.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:54.019Z,1513246674.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:54.457Z,1513246674.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:54.492Z,1513246674.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:54.790Z,1513246674.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:54.805Z,1513246674.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:54.810Z,1513246674.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:55.178Z,1513246675.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:55.205Z,1513246675.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:55.582Z,1513246675.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:55.603Z,1513246675.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:55.606Z,1513246675.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:55.982Z,1513246675.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:55.997Z,1513246675.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:56.402Z,1513246676.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:56.446Z,1513246676.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:56.477Z,1513246676.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:56.786Z,1513246676.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:56.817Z,1513246676.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:56.849Z,1513246676.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:57.188Z,1513246677.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:57.271Z,1513246677.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:57.594Z,1513246677.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:57.608Z,1513246677.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:57.614Z,1513246677.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:57.984Z,1513246677.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:58.048Z,1513246678.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:58.411Z,1513246678.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:58.447Z,1513246678.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:58.486Z,1513246678.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:58.778Z,1513246678.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:58.817Z,1513246678.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:58.834Z,1513246678.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:59.183Z,1513246679.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:59.203Z,1513246679.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:59.580Z,1513246679.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:59.595Z,1513246679.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:17:59.614Z,1513246679.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:59.985Z,1513246679.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:17:59.000Z,1513246680.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:00.411Z,1513246680.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:00.447Z,1513246680.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:00.486Z,1513246680.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:00.802Z,1513246680.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:00.818Z,1513246680.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:00.850Z,1513246680.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:01.187Z,1513246681.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:01.208Z,1513246681.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:01.582Z,1513246681.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:01.597Z,1513246681.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:01.614Z,1513246681.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:01.986Z,1513246681.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:02.000Z,1513246682.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:02.367Z,1513246682.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:02.423Z,1513246682.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:02.463Z,1513246682.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:02.801Z,1513246682.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:02.815Z,1513246682.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:02.873Z,1513246682.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:03.197Z,1513246683.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:03.211Z,1513246683.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:03.590Z,1513246683.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:03.606Z,1513246683.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:03.669Z,1513246683.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:04.020Z,1513246684.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:04.055Z,1513246684.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:04.379Z,1513246684.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:04.405Z,1513246684.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:04.465Z,1513246684.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:04.812Z,1513246684.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:04.828Z,1513246684.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:05.130Z,1513246685.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:05.196Z,1513246685.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:05.212Z,1513246685.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:05.597Z,1513246685.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:05.612Z,1513246685.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:05.925Z,1513246685.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:05.970Z,1513246685.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:06.009Z,1513246686.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:06.374Z,1513246686.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:06.408Z,1513246686.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:06.724Z,1513246686.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:06.801Z,1513246686.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:06.863Z,1513246686.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:07.170Z,1513246687.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:07.207Z,1513246687.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:07.242Z,1513246687.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:07.612Z,1513246687.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:07.659Z,1513246687.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:07.966Z,1513246687.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:07.984Z,1513246687.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:08.015Z,1513246688.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:08.451Z,1513246688.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:08.478Z,1513246688.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:08.763Z,1513246688.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:08.780Z,1513246688.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:08.795Z,1513246688.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:09.169Z,1513246689.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:09.178Z,1513246689.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:09.193Z,1513246689.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:09.577Z,1513246689.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:09.592Z,1513246689.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:09.966Z,1513246689.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:09.978Z,1513246689.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:09.993Z,1513246689.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:10.449Z,1513246690.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:10.505Z,1513246690.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:10.761Z,1513246690.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:10.803Z,1513246690.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:10.843Z,1513246690.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:11.165Z,1513246691.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:11.195Z,1513246691.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:11.210Z,1513246691.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:11.591Z,1513246691.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:11.605Z,1513246691.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:11.961Z,1513246691.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:12.002Z,1513246692.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:12.016Z,1513246692.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:12.442Z,1513246692.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:12.458Z,1513246692.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:12.757Z,1513246692.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:12.807Z,1513246692.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:12.845Z,1513246692.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:13.161Z,1513246693.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:13.185Z,1513246693.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:13.212Z,1513246693.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:13.595Z,1513246693.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:13.609Z,1513246693.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:13.958Z,1513246693.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:13.976Z,1513246693.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:14.010Z,1513246694.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:14.429Z,1513246694.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:14.460Z,1513246694.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:14.753Z,1513246694.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:14.791Z,1513246694.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:14.806Z,1513246694.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:15.157Z,1513246695.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:15.186Z,1513246695.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:15.208Z,1513246695.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:15.566Z,1513246695.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:15.599Z,1513246695.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:15.953Z,1513246695.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:15.997Z,1513246695.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:16.035Z,1513246696.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:16.387Z,1513246696.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:16.472Z,1513246696.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:16.749Z,1513246696.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:16.805Z,1513246696.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:16.840Z,1513246696.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:17.154Z,1513246697.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:17.194Z,1513246697.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:17.209Z,1513246697.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:17.579Z,1513246697.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:17.600Z,1513246697.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:17.949Z,1513246697.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:17.983Z,1513246697.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:18.004Z,1513246698.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:18.375Z,1513246698.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:18.405Z,1513246698.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:18.904Z,1513246698.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:18.954Z,1513246698.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:19.070Z,1513246699.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:19.191Z,1513246699.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:19.211Z,1513246699.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:19.330Z,1513246699.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:19.590Z,1513246699.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:19.634Z,1513246699.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:19.997Z,1513246699.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:20.039Z,1513246700.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:20.126Z,1513246700.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:20.388Z,1513246700.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:20.433Z,1513246700.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:20.801Z,1513246700.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:20.815Z,1513246700.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:20.921Z,1513246700.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:21.186Z,1513246701.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:21.202Z,1513246701.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:21.325Z,1513246701.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:21.578Z,1513246701.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:21.594Z,1513246701.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:21.989Z,1513246701.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:22.005Z,1513246702.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:22.121Z,1513246702.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:22.441Z,1513246702.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:22.476Z,1513246702.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:22.791Z,1513246702.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:22.810Z,1513246702.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:22.813Z,1513246702.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:23.220Z,1513246703.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:23.256Z,1513246703.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:23.579Z,1513246703.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:23.606Z,1513246703.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:23.606Z,1513246703.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:23.975Z,1513246703.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:23.000Z,1513246704.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:24.402Z,1513246704.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:24.414Z,1513246704.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:24.446Z,1513246704.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:24.785Z,1513246704.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:24.815Z,1513246704.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:25.195Z,1513246705.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:25.198Z,1513246705.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:25.254Z,1513246705.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:25.586Z,1513246705.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:25.609Z,1513246705.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:25.611Z,1513246705.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:25.972Z,1513246705.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:25.987Z,1513246705.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:26.406Z,1513246706.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:26.465Z,1513246706.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:26.479Z,1513246706.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:26.777Z,1513246706.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:26.792Z,1513246706.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:26.833Z,1513246706.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:27.189Z,1513246707.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:27.215Z,1513246707.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:27.590Z,1513246707.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:27.615Z,1513246707.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:27.630Z,1513246707.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:27.972Z,1513246707.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:27.987Z,1513246707.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:28.426Z,1513246708.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:28.429Z,1513246708.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:28.488Z,1513246708.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:28.779Z,1513246708.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:28.815Z,1513246708.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:28.837Z,1513246708.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:29.178Z,1513246709.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:29.192Z,1513246709.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:29.578Z,1513246709.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:29.592Z,1513246709.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:29.634Z,1513246709.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:29.994Z,1513246709.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:30.025Z,1513246710.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:30.431Z,1513246710.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:30.443Z,1513246710.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:30.496Z,1513246710.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:30.792Z,1513246710.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:30.807Z,1513246710.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:30.865Z,1513246710.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:31.180Z,1513246711.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:31.199Z,1513246711.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:31.567Z,1513246711.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:31.594Z,1513246711.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:31.661Z,1513246711.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:31.982Z,1513246711.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:31.997Z,1513246711.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:32.383Z,1513246712.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:32.398Z,1513246712.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:32.457Z,1513246712.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:32.800Z,1513246712.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:32.839Z,1513246712.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:33.126Z,1513246713.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:33.200Z,1513246713.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:33.220Z,1513246713.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:33.589Z,1513246713.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:33.604Z,1513246713.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:33.922Z,1513246713.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:33.996Z,1513246713.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:34.026Z,1513246714.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:34.372Z,1513246714.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:34.398Z,1513246714.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:34.720Z,1513246714.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:34.788Z,1513246714.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:34.846Z,1513246714.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:35.129Z,1513246715.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:35.183Z,1513246715.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:35.204Z,1513246715.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:35.580Z,1513246715.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:35.599Z,1513246715.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:35.926Z,1513246715.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:36.018Z,1513246716.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:36.038Z,1513246716.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:36.447Z,1513246716.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:36.482Z,1513246716.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:36.721Z,1513246716.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:36.795Z,1513246716.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:36.818Z,1513246716.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:37.125Z,1513246717.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:37.171Z,1513246717.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:37.198Z,1513246717.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:37.584Z,1513246717.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:37.607Z,1513246717.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:37.922Z,1513246717.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:37.985Z,1513246717.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:37.000Z,1513246718.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:38.414Z,1513246718.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:38.449Z,1513246718.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:38.717Z,1513246718.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:38.802Z,1513246718.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:38.822Z,1513246718.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:39.121Z,1513246719.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:39.236Z,1513246719.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:39.276Z,1513246719.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:39.594Z,1513246719.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:39.627Z,1513246719.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:39.918Z,1513246719.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:39.980Z,1513246719.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:39.996Z,1513246719.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:40.433Z,1513246720.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:40.526Z,1513246720.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:40.713Z,1513246720.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:40.784Z,1513246720.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:40.800Z,1513246720.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:40.803Z,1513246720.803 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T10:18:40.803Z,1513246720.803 [Default:CheckIn:C.Wait] Stopped
2017-12-14T10:18:40.803Z,1513246720.803 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T10:18:40.804Z,1513246720.804 [Default:CheckIn:D] Running Loop=1
2017-12-14T10:18:41.117Z,1513246721.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:41.187Z,1513246721.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:41.202Z,1513246721.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:41.206Z,1513246721.206 [Default:CheckIn:D] Stopped
2017-12-14T10:18:41.206Z,1513246721.206 [Default:CheckIn:E] Running Loop=1
2017-12-14T10:18:41.581Z,1513246721.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:41.637Z,1513246721.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:41.640Z,1513246721.640 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 585.430273 min 
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn:E] Stopped
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn] Stopped
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn](INFO): Running loop #57
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn] Running Loop=57
2017-12-14T10:18:41.641Z,1513246721.641 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T10:18:41.642Z,1513246721.642 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T10:18:41.914Z,1513246721.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:42.709Z,1513246722.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:43.113Z,1513246723.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:43.910Z,1513246723.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:44.705Z,1513246724.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:45.109Z,1513246725.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:45.194Z,1513246725.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:45.208Z,1513246725.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:45.334Z,1513246725.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:45.394Z,1513246725.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:45.723Z,1513246725.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:45.771Z,1513246725.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:45.905Z,1513246725.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:46.097Z,1513246726.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:46.112Z,1513246726.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:46.501Z,1513246726.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:46.516Z,1513246726.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:46.703Z,1513246726.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:46.898Z,1513246726.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:46.914Z,1513246726.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:47.134Z,1513246727.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:47.300Z,1513246727.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:47.314Z,1513246727.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:47.695Z,1513246727.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:47.714Z,1513246727.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:47.930Z,1513246727.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:48.102Z,1513246728.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:48.117Z,1513246728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:48.513Z,1513246728.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:48.545Z,1513246728.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:48.735Z,1513246728.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:48.933Z,1513246728.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:48.956Z,1513246728.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:49.141Z,1513246729.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:49.299Z,1513246729.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:49.327Z,1513246729.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:49.704Z,1513246729.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:49.719Z,1513246729.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:49.937Z,1513246729.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:50.102Z,1513246730.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:50.117Z,1513246730.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:50.501Z,1513246730.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:50.516Z,1513246730.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:50.737Z,1513246730.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:50.906Z,1513246730.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:50.922Z,1513246730.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:51.141Z,1513246731.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:51.305Z,1513246731.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:51.322Z,1513246731.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:51.704Z,1513246731.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:51.720Z,1513246731.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:51.938Z,1513246731.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:52.102Z,1513246732.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:52.123Z,1513246732.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:52.491Z,1513246732.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:52.517Z,1513246732.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:52.734Z,1513246732.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:52.912Z,1513246732.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:52.927Z,1513246732.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:53.137Z,1513246733.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:53.292Z,1513246733.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:53.323Z,1513246733.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:53.689Z,1513246733.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:53.743Z,1513246733.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:53.934Z,1513246733.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:54.114Z,1513246734.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:54.130Z,1513246734.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:54.515Z,1513246734.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:54.535Z,1513246734.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:54.730Z,1513246734.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:54.906Z,1513246734.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:54.936Z,1513246734.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:55.133Z,1513246735.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:55.294Z,1513246735.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:55.331Z,1513246735.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:55.691Z,1513246735.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:55.724Z,1513246735.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:55.929Z,1513246735.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:56.095Z,1513246736.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:56.122Z,1513246736.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:56.491Z,1513246736.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:56.523Z,1513246736.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:56.725Z,1513246736.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:56.922Z,1513246736.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:56.937Z,1513246736.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:57.129Z,1513246737.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:57.318Z,1513246737.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:57.339Z,1513246737.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:57.714Z,1513246737.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:57.729Z,1513246737.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:57.925Z,1513246737.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:58.117Z,1513246738.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:58.132Z,1513246738.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:58.493Z,1513246738.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:58.546Z,1513246738.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:58.722Z,1513246738.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:58.890Z,1513246738.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:58.926Z,1513246738.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:59.125Z,1513246739.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:59.291Z,1513246739.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:59.326Z,1513246739.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:59.688Z,1513246739.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:18:59.703Z,1513246739.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:18:59.922Z,1513246739.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:00.106Z,1513246740.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:00.143Z,1513246740.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:00.506Z,1513246740.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:00.535Z,1513246740.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:00.719Z,1513246740.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:00.911Z,1513246740.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:00.934Z,1513246740.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:01.146Z,1513246741.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:01.297Z,1513246741.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:01.312Z,1513246741.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:01.713Z,1513246741.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:01.757Z,1513246741.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:01.942Z,1513246741.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:02.102Z,1513246742.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:02.116Z,1513246742.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:02.501Z,1513246742.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:02.568Z,1513246742.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:02.739Z,1513246742.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:02.914Z,1513246742.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:02.945Z,1513246742.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:03.146Z,1513246743.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:03.315Z,1513246743.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:03.344Z,1513246743.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:03.713Z,1513246743.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:03.744Z,1513246743.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:03.942Z,1513246743.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:04.099Z,1513246744.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:04.114Z,1513246744.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:04.507Z,1513246744.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:04.543Z,1513246744.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:04.738Z,1513246744.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:04.939Z,1513246744.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:04.958Z,1513246744.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:05.141Z,1513246745.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:05.299Z,1513246745.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:05.315Z,1513246745.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:05.704Z,1513246745.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:05.770Z,1513246745.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:05.940Z,1513246745.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:06.108Z,1513246746.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:06.127Z,1513246746.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:06.507Z,1513246746.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:06.531Z,1513246746.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:06.733Z,1513246746.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:06.895Z,1513246746.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:06.926Z,1513246746.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:07.137Z,1513246747.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:07.303Z,1513246747.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:07.323Z,1513246747.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:07.703Z,1513246747.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:07.719Z,1513246747.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:07.933Z,1513246747.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:08.127Z,1513246748.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:08.156Z,1513246748.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:08.512Z,1513246748.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:08.531Z,1513246748.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:08.729Z,1513246748.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:08.910Z,1513246748.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:08.919Z,1513246748.919 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:19:08.919Z,1513246748.919 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:19:08.919Z,1513246748.919 [BPC1](ERROR): Communications Fault
2017-12-14T10:19:08.927Z,1513246748.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:08.940Z,1513246748.940 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:19:09.133Z,1513246749.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:09.309Z,1513246749.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:09.324Z,1513246749.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:09.698Z,1513246749.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:09.724Z,1513246749.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:09.929Z,1513246749.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:10.095Z,1513246750.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:10.123Z,1513246750.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:10.137Z,1513246750.137 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:19:10.137Z,1513246750.137 [BPC1] No Fault, FailCount= 1
2017-12-14T10:19:10.511Z,1513246750.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:10.579Z,1513246750.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:10.725Z,1513246750.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:10.920Z,1513246750.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:10.935Z,1513246750.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:11.129Z,1513246751.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:11.331Z,1513246751.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:11.368Z,1513246751.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:11.692Z,1513246751.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:11.719Z,1513246751.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:11.926Z,1513246751.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:12.090Z,1513246752.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:12.120Z,1513246752.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:12.513Z,1513246752.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:12.528Z,1513246752.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:12.721Z,1513246752.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:12.912Z,1513246752.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:12.929Z,1513246752.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:12.942Z,1513246752.942 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:19:13.125Z,1513246753.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:13.309Z,1513246753.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:13.324Z,1513246753.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:13.694Z,1513246753.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:13.721Z,1513246753.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:13.921Z,1513246753.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:14.089Z,1513246754.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:14.120Z,1513246754.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:14.519Z,1513246754.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:14.538Z,1513246754.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:14.719Z,1513246754.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:14.891Z,1513246754.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:14.928Z,1513246754.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:15.153Z,1513246755.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:15.299Z,1513246755.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:15.330Z,1513246755.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:15.705Z,1513246755.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:15.728Z,1513246755.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:15.950Z,1513246755.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:16.114Z,1513246756.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:16.129Z,1513246756.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:16.516Z,1513246756.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:16.531Z,1513246756.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:16.747Z,1513246756.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:16.908Z,1513246756.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:16.933Z,1513246756.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:17.149Z,1513246757.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:17.295Z,1513246757.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:17.330Z,1513246757.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:17.699Z,1513246757.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:17.730Z,1513246757.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:17.946Z,1513246757.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:18.090Z,1513246758.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:18.111Z,1513246758.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:18.505Z,1513246758.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:18.520Z,1513246758.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:18.743Z,1513246758.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:18.929Z,1513246758.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:18.979Z,1513246758.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:19.149Z,1513246759.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:19.310Z,1513246759.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:19.324Z,1513246759.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:19.703Z,1513246759.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:19.717Z,1513246759.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:19.946Z,1513246759.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:20.090Z,1513246760.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:20.123Z,1513246760.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:20.515Z,1513246760.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:20.531Z,1513246760.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:20.743Z,1513246760.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:20.892Z,1513246760.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:20.925Z,1513246760.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:21.145Z,1513246761.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:21.288Z,1513246761.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:21.320Z,1513246761.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:21.711Z,1513246761.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:21.736Z,1513246761.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:21.942Z,1513246761.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:22.101Z,1513246762.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:22.136Z,1513246762.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:22.511Z,1513246762.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:22.526Z,1513246762.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:22.737Z,1513246762.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:22.913Z,1513246762.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:22.928Z,1513246762.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:23.141Z,1513246763.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:23.291Z,1513246763.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:23.328Z,1513246763.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:23.695Z,1513246763.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:23.720Z,1513246763.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:23.938Z,1513246763.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:24.090Z,1513246764.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:24.125Z,1513246764.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:24.512Z,1513246764.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:24.526Z,1513246764.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:24.733Z,1513246764.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:24.925Z,1513246764.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:24.948Z,1513246764.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:25.137Z,1513246765.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:25.319Z,1513246765.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:25.339Z,1513246765.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:25.695Z,1513246765.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:25.723Z,1513246765.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:25.934Z,1513246765.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:26.095Z,1513246766.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:26.120Z,1513246766.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:26.493Z,1513246766.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:26.527Z,1513246766.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:26.729Z,1513246766.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:26.892Z,1513246766.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:26.926Z,1513246766.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:27.133Z,1513246767.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:27.296Z,1513246767.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:27.335Z,1513246767.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:27.703Z,1513246767.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:27.767Z,1513246767.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:27.929Z,1513246767.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:28.119Z,1513246768.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:28.138Z,1513246768.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:28.502Z,1513246768.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:28.531Z,1513246768.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:28.727Z,1513246768.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:28.891Z,1513246768.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:28.931Z,1513246768.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:29.137Z,1513246769.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:29.291Z,1513246769.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:29.305Z,1513246769.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:29.696Z,1513246769.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:29.739Z,1513246769.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:29.934Z,1513246769.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:30.100Z,1513246770.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:30.147Z,1513246770.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:30.501Z,1513246770.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:30.517Z,1513246770.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:30.730Z,1513246770.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:30.905Z,1513246770.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:30.921Z,1513246770.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:31.137Z,1513246771.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:31.315Z,1513246771.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:31.347Z,1513246771.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:31.712Z,1513246771.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:31.752Z,1513246771.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:31.933Z,1513246771.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:32.097Z,1513246772.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:32.120Z,1513246772.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:32.499Z,1513246772.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:32.555Z,1513246772.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:32.729Z,1513246772.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:32.895Z,1513246772.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:32.923Z,1513246772.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:33.133Z,1513246773.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:33.313Z,1513246773.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:33.328Z,1513246773.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:33.714Z,1513246773.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:33.728Z,1513246773.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:33.930Z,1513246773.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:34.115Z,1513246774.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:34.130Z,1513246774.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:34.495Z,1513246774.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:34.531Z,1513246774.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:34.725Z,1513246774.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:34.890Z,1513246774.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:34.919Z,1513246774.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:35.129Z,1513246775.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:35.308Z,1513246775.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:35.328Z,1513246775.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:35.708Z,1513246775.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:35.724Z,1513246775.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:35.926Z,1513246775.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:36.104Z,1513246776.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:36.135Z,1513246776.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:36.491Z,1513246776.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:36.526Z,1513246776.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:36.721Z,1513246776.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:36.891Z,1513246776.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:36.927Z,1513246776.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:37.125Z,1513246777.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:37.315Z,1513246777.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:37.335Z,1513246777.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:37.770Z,1513246777.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:37.799Z,1513246777.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:37.921Z,1513246777.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:38.105Z,1513246778.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:38.131Z,1513246778.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:38.491Z,1513246778.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:38.525Z,1513246778.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:38.717Z,1513246778.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:38.892Z,1513246778.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:38.928Z,1513246778.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:39.121Z,1513246779.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:39.310Z,1513246779.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:39.325Z,1513246779.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:39.712Z,1513246779.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:39.732Z,1513246779.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:39.918Z,1513246779.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:40.110Z,1513246780.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:40.124Z,1513246780.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:40.494Z,1513246780.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:40.526Z,1513246780.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:40.713Z,1513246780.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:40.941Z,1513246780.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:41.016Z,1513246781.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:41.117Z,1513246781.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:41.309Z,1513246781.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:41.329Z,1513246781.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:41.713Z,1513246781.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:41.728Z,1513246781.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:41.914Z,1513246781.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:42.710Z,1513246782.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:43.153Z,1513246783.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:43.952Z,1513246783.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:44.747Z,1513246784.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:45.161Z,1513246785.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:45.322Z,1513246785.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:45.337Z,1513246785.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:45.432Z,1513246785.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:45.479Z,1513246785.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:45.824Z,1513246785.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:45.839Z,1513246785.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:45.958Z,1513246785.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:46.224Z,1513246786.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:46.253Z,1513246786.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:46.623Z,1513246786.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:46.639Z,1513246786.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:46.753Z,1513246786.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:47.018Z,1513246787.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:47.048Z,1513246787.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:47.157Z,1513246787.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:47.429Z,1513246787.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:47.447Z,1513246787.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:47.834Z,1513246787.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:47.849Z,1513246787.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:47.954Z,1513246787.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:48.237Z,1513246788.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:48.255Z,1513246788.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:48.635Z,1513246788.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:48.650Z,1513246788.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:48.749Z,1513246788.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:49.017Z,1513246789.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:49.048Z,1513246789.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:49.153Z,1513246789.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:49.424Z,1513246789.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:49.439Z,1513246789.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:49.830Z,1513246789.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:49.844Z,1513246789.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:49.949Z,1513246789.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:50.228Z,1513246790.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:50.243Z,1513246790.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:50.634Z,1513246790.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:50.655Z,1513246790.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:50.746Z,1513246790.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:51.037Z,1513246791.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:51.059Z,1513246791.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:51.149Z,1513246791.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:51.437Z,1513246791.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:51.453Z,1513246791.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:51.814Z,1513246791.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:51.855Z,1513246791.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:51.946Z,1513246791.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:52.226Z,1513246792.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:52.253Z,1513246792.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:52.616Z,1513246792.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:52.642Z,1513246792.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:52.741Z,1513246792.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:53.015Z,1513246793.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:53.041Z,1513246793.041 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T10:19:53.041Z,1513246793.041 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:19:53.041Z,1513246793.041 [BPC1](ERROR): Data Fault
2017-12-14T10:19:53.053Z,1513246793.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:53.080Z,1513246793.080 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:19:53.146Z,1513246793.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:53.437Z,1513246793.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:53.458Z,1513246793.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:53.829Z,1513246793.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:53.851Z,1513246793.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:53.942Z,1513246793.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:54.239Z,1513246794.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:54.259Z,1513246794.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:54.272Z,1513246794.272 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:19:54.272Z,1513246794.272 [BPC1] No Fault, FailCount= 1
2017-12-14T10:19:54.623Z,1513246794.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:54.695Z,1513246794.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:54.738Z,1513246794.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:55.023Z,1513246795.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:55.053Z,1513246795.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:55.141Z,1513246795.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:55.421Z,1513246795.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:55.448Z,1513246795.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:55.822Z,1513246795.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:55.836Z,1513246795.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:55.938Z,1513246795.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:56.210Z,1513246796.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:56.241Z,1513246796.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:56.672Z,1513246796.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:56.735Z,1513246796.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:56.772Z,1513246796.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:57.035Z,1513246797.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:57.072Z,1513246797.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:57.165Z,1513246797.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:57.433Z,1513246797.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:57.455Z,1513246797.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:57.826Z,1513246797.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:57.840Z,1513246797.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:57.962Z,1513246797.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:58.215Z,1513246798.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:58.240Z,1513246798.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:58.629Z,1513246798.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:58.644Z,1513246798.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:58.758Z,1513246798.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:59.021Z,1513246799.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:59.051Z,1513246799.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:59.161Z,1513246799.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:59.426Z,1513246799.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:59.460Z,1513246799.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:59.825Z,1513246799.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:19:59.873Z,1513246799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:19:59.958Z,1513246799.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:00.225Z,1513246800.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:00.255Z,1513246800.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:00.627Z,1513246800.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:00.652Z,1513246800.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:00.753Z,1513246800.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:01.016Z,1513246801.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:01.047Z,1513246801.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:01.157Z,1513246801.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:01.420Z,1513246801.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:01.462Z,1513246801.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:01.818Z,1513246801.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:01.858Z,1513246801.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:01.953Z,1513246801.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:02.217Z,1513246802.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:02.232Z,1513246802.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:02.633Z,1513246802.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:02.664Z,1513246802.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:02.749Z,1513246802.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:03.034Z,1513246803.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:03.111Z,1513246803.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:03.153Z,1513246803.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:03.434Z,1513246803.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:03.456Z,1513246803.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:03.820Z,1513246803.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:03.835Z,1513246803.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:03.950Z,1513246803.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:04.216Z,1513246804.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:04.237Z,1513246804.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:04.624Z,1513246804.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:04.640Z,1513246804.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:04.746Z,1513246804.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:05.026Z,1513246805.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:05.042Z,1513246805.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:05.149Z,1513246805.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:05.426Z,1513246805.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:05.442Z,1513246805.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:05.829Z,1513246805.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:05.844Z,1513246805.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:05.946Z,1513246805.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:06.247Z,1513246806.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:06.288Z,1513246806.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:06.615Z,1513246806.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:06.646Z,1513246806.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:06.741Z,1513246806.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:07.015Z,1513246807.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:07.051Z,1513246807.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:07.146Z,1513246807.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:07.414Z,1513246807.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:07.428Z,1513246807.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:07.870Z,1513246807.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:07.905Z,1513246807.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:07.942Z,1513246807.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:08.220Z,1513246808.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:08.262Z,1513246808.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:08.624Z,1513246808.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:08.671Z,1513246808.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:08.737Z,1513246808.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:09.037Z,1513246809.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:09.070Z,1513246809.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:09.141Z,1513246809.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:09.434Z,1513246809.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:09.469Z,1513246809.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:09.818Z,1513246809.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:09.849Z,1513246809.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:09.937Z,1513246809.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:10.216Z,1513246810.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:10.243Z,1513246810.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:10.625Z,1513246810.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:10.653Z,1513246810.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:10.735Z,1513246810.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:11.024Z,1513246811.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:11.040Z,1513246811.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:11.153Z,1513246811.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:11.438Z,1513246811.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:11.469Z,1513246811.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:11.833Z,1513246811.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:11.866Z,1513246811.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:11.951Z,1513246811.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:12.230Z,1513246812.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:12.248Z,1513246812.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:12.622Z,1513246812.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:12.672Z,1513246812.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:12.747Z,1513246812.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:13.015Z,1513246813.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:13.046Z,1513246813.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:13.166Z,1513246813.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:13.418Z,1513246813.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:13.445Z,1513246813.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:13.816Z,1513246813.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:13.886Z,1513246813.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:13.961Z,1513246813.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:14.218Z,1513246814.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:14.250Z,1513246814.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:14.625Z,1513246814.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:14.655Z,1513246814.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:14.757Z,1513246814.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:15.034Z,1513246815.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:15.065Z,1513246815.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:15.161Z,1513246815.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:15.433Z,1513246815.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:15.487Z,1513246815.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:15.822Z,1513246815.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:15.836Z,1513246815.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:15.958Z,1513246815.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:16.231Z,1513246816.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:16.288Z,1513246816.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:16.618Z,1513246816.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:16.651Z,1513246816.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:16.753Z,1513246816.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:17.018Z,1513246817.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:17.079Z,1513246817.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:17.159Z,1513246817.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:17.435Z,1513246817.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:17.450Z,1513246817.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:17.833Z,1513246817.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:17.847Z,1513246817.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:17.955Z,1513246817.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:18.233Z,1513246818.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:18.258Z,1513246818.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:18.614Z,1513246818.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:18.651Z,1513246818.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:18.749Z,1513246818.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:19.067Z,1513246819.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:19.099Z,1513246819.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:19.153Z,1513246819.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:19.415Z,1513246819.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:19.443Z,1513246819.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:19.813Z,1513246819.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:19.849Z,1513246819.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:19.950Z,1513246819.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:20.216Z,1513246820.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:20.248Z,1513246820.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:20.636Z,1513246820.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:20.655Z,1513246820.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:20.746Z,1513246820.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:21.040Z,1513246821.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:21.055Z,1513246821.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:21.149Z,1513246821.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:21.434Z,1513246821.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:21.450Z,1513246821.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:21.814Z,1513246821.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:21.851Z,1513246821.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:21.946Z,1513246821.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:22.212Z,1513246822.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:22.310Z,1513246822.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:22.616Z,1513246822.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:22.642Z,1513246822.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:22.741Z,1513246822.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:23.036Z,1513246823.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:23.052Z,1513246823.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:23.146Z,1513246823.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:23.435Z,1513246823.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:23.450Z,1513246823.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:23.837Z,1513246823.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:23.853Z,1513246823.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:23.942Z,1513246823.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:24.231Z,1513246824.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:24.255Z,1513246824.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:24.614Z,1513246824.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:24.641Z,1513246824.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:24.739Z,1513246824.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:25.035Z,1513246825.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:25.077Z,1513246825.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:25.149Z,1513246825.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:25.427Z,1513246825.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:25.490Z,1513246825.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:25.815Z,1513246825.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:25.845Z,1513246825.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:25.947Z,1513246825.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:26.215Z,1513246826.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:26.246Z,1513246826.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:26.634Z,1513246826.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:26.648Z,1513246826.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:26.743Z,1513246826.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:27.039Z,1513246827.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:27.064Z,1513246827.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:27.149Z,1513246827.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:27.434Z,1513246827.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:27.454Z,1513246827.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:27.815Z,1513246827.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:27.859Z,1513246827.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:27.946Z,1513246827.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:28.212Z,1513246828.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:28.243Z,1513246828.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:28.615Z,1513246828.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:28.687Z,1513246828.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:28.742Z,1513246828.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:29.020Z,1513246829.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:29.035Z,1513246829.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:29.146Z,1513246829.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:29.433Z,1513246829.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:29.461Z,1513246829.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:29.833Z,1513246829.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:29.879Z,1513246829.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:29.944Z,1513246829.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:30.234Z,1513246830.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:30.264Z,1513246830.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:30.620Z,1513246830.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:30.634Z,1513246830.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:30.737Z,1513246830.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:31.019Z,1513246831.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:31.038Z,1513246831.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:31.141Z,1513246831.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:31.420Z,1513246831.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:31.443Z,1513246831.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:31.827Z,1513246831.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:31.842Z,1513246831.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:31.938Z,1513246831.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:32.215Z,1513246832.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:32.251Z,1513246832.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:32.625Z,1513246832.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:32.663Z,1513246832.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:32.733Z,1513246832.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:33.037Z,1513246833.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:33.058Z,1513246833.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:33.137Z,1513246833.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:33.426Z,1513246833.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:33.466Z,1513246833.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:33.818Z,1513246833.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:33.851Z,1513246833.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:33.934Z,1513246833.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:34.215Z,1513246834.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:34.235Z,1513246834.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:34.620Z,1513246834.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:34.649Z,1513246834.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:34.730Z,1513246834.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:35.018Z,1513246835.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:35.068Z,1513246835.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:35.134Z,1513246835.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:35.441Z,1513246835.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:35.471Z,1513246835.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:35.833Z,1513246835.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:35.872Z,1513246835.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:35.930Z,1513246835.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:36.229Z,1513246836.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:36.244Z,1513246836.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:36.634Z,1513246836.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:36.649Z,1513246836.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:36.725Z,1513246836.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:37.029Z,1513246837.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:37.105Z,1513246837.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:37.129Z,1513246837.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:37.426Z,1513246837.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:37.442Z,1513246837.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:37.825Z,1513246837.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:37.839Z,1513246837.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:37.925Z,1513246837.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:38.254Z,1513246838.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:38.286Z,1513246838.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:38.633Z,1513246838.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:38.723Z,1513246838.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:38.762Z,1513246838.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:39.038Z,1513246839.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:39.052Z,1513246839.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:39.146Z,1513246839.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:39.434Z,1513246839.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:39.491Z,1513246839.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:39.818Z,1513246839.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:39.847Z,1513246839.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:39.941Z,1513246839.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:40.223Z,1513246840.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:40.238Z,1513246840.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:40.624Z,1513246840.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:40.663Z,1513246840.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:40.739Z,1513246840.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:41.026Z,1513246841.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:41.053Z,1513246841.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:41.157Z,1513246841.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:41.444Z,1513246841.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:41.496Z,1513246841.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:41.838Z,1513246841.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:41.854Z,1513246841.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:41.854Z,1513246841.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196
2017-12-14T10:20:41.854Z,1513246841.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:20:41.855Z,1513246841.855 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:41.856Z,1513246841.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 196
2017-12-14T10:20:41.856Z,1513246841.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:20:41.858Z,1513246841.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:41.858Z,1513246841.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196
2017-12-14T10:20:41.858Z,1513246841.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:20:41.878Z,1513246841.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:20:41.878Z,1513246841.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:20:41.878Z,1513246841.878 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:20:41.954Z,1513246841.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:42.749Z,1513246842.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:43.153Z,1513246843.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:43.950Z,1513246843.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:44.746Z,1513246844.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:45.149Z,1513246845.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:45.395Z,1513246845.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:45.420Z,1513246845.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:20:45.420Z,1513246845.420 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196
2017-12-14T10:20:45.437Z,1513246845.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:20:45.437Z,1513246845.437 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 196
2017-12-14T10:20:45.438Z,1513246845.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:20:45.438Z,1513246845.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196
2017-12-14T10:20:45.530Z,1513246845.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:45.543Z,1513246845.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:20:45.544Z,1513246845.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:20:45.544Z,1513246845.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:20:45.544Z,1513246845.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:20:45.546Z,1513246845.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:20:45.546Z,1513246845.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:20:45.546Z,1513246845.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:20:45.547Z,1513246845.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:20:45.547Z,1513246845.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:20:45.874Z,1513246845.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:45.924Z,1513246845.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:45.946Z,1513246845.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:46.270Z,1513246846.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:46.293Z,1513246846.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:46.671Z,1513246846.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:46.718Z,1513246846.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:46.742Z,1513246846.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:47.082Z,1513246847.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:47.116Z,1513246847.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:47.146Z,1513246847.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:47.491Z,1513246847.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:47.532Z,1513246847.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:47.908Z,1513246847.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:47.940Z,1513246847.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:47.942Z,1513246847.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:48.298Z,1513246848.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:48.328Z,1513246848.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:48.682Z,1513246848.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:48.711Z,1513246848.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:48.738Z,1513246848.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:49.088Z,1513246849.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:49.107Z,1513246849.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:49.141Z,1513246849.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:49.486Z,1513246849.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:49.501Z,1513246849.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:49.878Z,1513246849.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:49.903Z,1513246849.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:49.938Z,1513246849.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:50.287Z,1513246850.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:50.307Z,1513246850.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:50.692Z,1513246850.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:50.707Z,1513246850.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:50.733Z,1513246850.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:51.095Z,1513246851.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:51.123Z,1513246851.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:51.137Z,1513246851.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:51.486Z,1513246851.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:51.516Z,1513246851.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:51.885Z,1513246851.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:51.911Z,1513246851.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:51.934Z,1513246851.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:52.276Z,1513246852.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:52.292Z,1513246852.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:52.710Z,1513246852.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:52.731Z,1513246852.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:52.781Z,1513246852.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:53.075Z,1513246853.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:53.116Z,1513246853.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:53.165Z,1513246853.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:53.497Z,1513246853.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:53.520Z,1513246853.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:53.891Z,1513246853.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:53.923Z,1513246853.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:53.962Z,1513246853.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:54.300Z,1513246854.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:54.332Z,1513246854.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:54.679Z,1513246854.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:54.762Z,1513246854.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:54.784Z,1513246854.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:55.088Z,1513246855.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:55.111Z,1513246855.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:55.166Z,1513246855.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:55.489Z,1513246855.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:55.505Z,1513246855.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:55.883Z,1513246855.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:55.898Z,1513246855.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:55.962Z,1513246855.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:56.284Z,1513246856.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:56.306Z,1513246856.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:56.694Z,1513246856.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:56.742Z,1513246856.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:56.758Z,1513246856.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:57.094Z,1513246857.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:57.108Z,1513246857.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:57.161Z,1513246857.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:57.514Z,1513246857.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:57.538Z,1513246857.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:57.878Z,1513246857.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:57.915Z,1513246857.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:57.958Z,1513246857.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:58.279Z,1513246858.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:58.311Z,1513246858.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:58.678Z,1513246858.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:58.723Z,1513246858.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:58.753Z,1513246858.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:59.088Z,1513246859.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:59.103Z,1513246859.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:59.157Z,1513246859.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:59.493Z,1513246859.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:59.509Z,1513246859.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:59.887Z,1513246859.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:20:59.911Z,1513246859.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:20:59.954Z,1513246859.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:00.297Z,1513246860.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:00.313Z,1513246860.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:00.718Z,1513246860.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:00.741Z,1513246860.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:00.750Z,1513246860.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:01.080Z,1513246861.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:01.114Z,1513246861.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:01.153Z,1513246861.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:01.486Z,1513246861.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:01.501Z,1513246861.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:01.887Z,1513246861.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:01.902Z,1513246861.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:01.950Z,1513246861.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:02.276Z,1513246862.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:02.301Z,1513246862.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:02.699Z,1513246862.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:02.707Z,1513246862.707 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:21:02.707Z,1513246862.707 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:21:02.707Z,1513246862.707 [BPC1](ERROR): Communications Fault
2017-12-14T10:21:02.741Z,1513246862.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:02.746Z,1513246862.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:02.766Z,1513246862.766 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:21:03.099Z,1513246863.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:03.129Z,1513246863.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:03.149Z,1513246863.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:03.492Z,1513246863.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:03.515Z,1513246863.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:03.899Z,1513246863.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:03.931Z,1513246863.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:03.946Z,1513246863.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:03.973Z,1513246863.973 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:21:03.973Z,1513246863.973 [BPC1] No Fault, FailCount= 1
2017-12-14T10:21:04.271Z,1513246864.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:04.359Z,1513246864.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:04.673Z,1513246864.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:04.710Z,1513246864.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:04.742Z,1513246864.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:05.078Z,1513246865.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:05.099Z,1513246865.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:05.146Z,1513246865.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:05.490Z,1513246865.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:05.504Z,1513246865.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:05.889Z,1513246865.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:05.908Z,1513246865.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:05.942Z,1513246865.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:06.290Z,1513246866.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:06.305Z,1513246866.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:06.692Z,1513246866.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:06.739Z,1513246866.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:06.775Z,1513246866.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:07.090Z,1513246867.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:07.140Z,1513246867.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:07.158Z,1513246867.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:07.480Z,1513246867.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:07.527Z,1513246867.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:07.882Z,1513246867.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:07.891Z,1513246867.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x11067 got:0x15877
2017-12-14T10:21:07.921Z,1513246867.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:07.966Z,1513246867.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:08.277Z,1513246868.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:08.304Z,1513246868.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:08.721Z,1513246868.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:08.761Z,1513246868.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:08.785Z,1513246868.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:09.088Z,1513246869.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:09.108Z,1513246869.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:09.186Z,1513246869.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:09.486Z,1513246869.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:09.502Z,1513246869.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:09.885Z,1513246869.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:09.900Z,1513246869.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:09.982Z,1513246869.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:10.286Z,1513246870.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:10.390Z,1513246870.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:10.674Z,1513246870.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:10.710Z,1513246870.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:10.777Z,1513246870.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:11.080Z,1513246871.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:11.103Z,1513246871.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:11.181Z,1513246871.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:11.491Z,1513246871.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:11.506Z,1513246871.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:11.886Z,1513246871.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:11.915Z,1513246871.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:11.978Z,1513246871.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:12.334Z,1513246872.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:12.447Z,1513246872.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:12.676Z,1513246872.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:12.708Z,1513246872.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:12.773Z,1513246872.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:13.076Z,1513246873.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:13.173Z,1513246873.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:13.177Z,1513246873.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:13.485Z,1513246873.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:13.508Z,1513246873.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:13.889Z,1513246873.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:13.928Z,1513246873.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:13.973Z,1513246873.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:14.286Z,1513246874.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:14.301Z,1513246874.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:14.713Z,1513246874.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:14.739Z,1513246874.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:14.769Z,1513246874.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:15.089Z,1513246875.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:15.104Z,1513246875.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:15.173Z,1513246875.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:15.483Z,1513246875.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:15.506Z,1513246875.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:15.887Z,1513246875.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:15.902Z,1513246875.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:15.971Z,1513246875.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:16.284Z,1513246876.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:16.310Z,1513246876.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:16.688Z,1513246876.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:16.747Z,1513246876.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:16.766Z,1513246876.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:17.106Z,1513246877.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:17.121Z,1513246877.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:17.169Z,1513246877.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:17.498Z,1513246877.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:17.512Z,1513246877.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:17.872Z,1513246877.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:17.899Z,1513246877.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:17.966Z,1513246877.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:18.278Z,1513246878.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:18.316Z,1513246878.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:18.673Z,1513246878.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:18.718Z,1513246878.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:18.761Z,1513246878.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:19.087Z,1513246879.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:19.125Z,1513246879.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:19.169Z,1513246879.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:19.492Z,1513246879.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:19.525Z,1513246879.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:19.899Z,1513246879.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:19.947Z,1513246879.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:19.970Z,1513246879.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:20.297Z,1513246880.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:20.336Z,1513246880.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:20.671Z,1513246880.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:20.765Z,1513246880.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:20.769Z,1513246880.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:21.090Z,1513246881.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:21.137Z,1513246881.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:21.169Z,1513246881.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:21.489Z,1513246881.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:21.520Z,1513246881.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:21.874Z,1513246881.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:21.916Z,1513246881.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:21.966Z,1513246881.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:22.274Z,1513246882.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:22.354Z,1513246882.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:22.729Z,1513246882.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:22.761Z,1513246882.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:22.863Z,1513246882.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:23.092Z,1513246883.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:23.173Z,1513246883.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:23.186Z,1513246883.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:23.510Z,1513246883.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:23.556Z,1513246883.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:23.891Z,1513246883.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:23.930Z,1513246883.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:23.982Z,1513246883.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:24.315Z,1513246884.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:24.441Z,1513246884.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:24.678Z,1513246884.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:24.711Z,1513246884.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:24.778Z,1513246884.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:25.076Z,1513246885.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:25.119Z,1513246885.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:25.181Z,1513246885.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:25.511Z,1513246885.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:25.539Z,1513246885.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:25.888Z,1513246885.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:25.902Z,1513246885.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:25.977Z,1513246885.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:26.287Z,1513246886.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:26.315Z,1513246886.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:26.696Z,1513246886.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:26.735Z,1513246886.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:26.774Z,1513246886.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:27.114Z,1513246887.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:27.129Z,1513246887.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:27.177Z,1513246887.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:27.498Z,1513246887.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:27.528Z,1513246887.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:27.910Z,1513246887.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:27.943Z,1513246887.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:27.982Z,1513246887.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:28.299Z,1513246888.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:28.339Z,1513246888.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:28.721Z,1513246888.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:28.736Z,1513246888.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:28.777Z,1513246888.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:29.103Z,1513246889.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:29.124Z,1513246889.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:29.181Z,1513246889.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:29.501Z,1513246889.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:29.523Z,1513246889.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:29.876Z,1513246889.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:29.939Z,1513246889.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:29.978Z,1513246889.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:30.272Z,1513246890.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:30.320Z,1513246890.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:30.698Z,1513246890.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:30.747Z,1513246890.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:30.774Z,1513246890.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:31.094Z,1513246891.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:31.116Z,1513246891.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:31.177Z,1513246891.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:31.528Z,1513246891.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:31.564Z,1513246891.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:31.868Z,1513246891.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:31.943Z,1513246891.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:31.974Z,1513246891.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:32.277Z,1513246892.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:32.316Z,1513246892.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:32.704Z,1513246892.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:32.715Z,1513246892.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x27000 got:0x36821
2017-12-14T10:21:32.770Z,1513246892.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:32.787Z,1513246892.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:33.097Z,1513246893.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:33.142Z,1513246893.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:33.173Z,1513246893.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:33.492Z,1513246893.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:33.531Z,1513246893.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:33.889Z,1513246893.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:33.960Z,1513246893.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:33.970Z,1513246893.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:34.284Z,1513246894.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:34.358Z,1513246894.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:34.676Z,1513246894.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:34.766Z,1513246894.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:34.789Z,1513246894.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:35.088Z,1513246895.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:35.131Z,1513246895.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:35.169Z,1513246895.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:35.494Z,1513246895.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:35.524Z,1513246895.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:35.886Z,1513246895.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:35.923Z,1513246895.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:35.966Z,1513246895.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:36.282Z,1513246896.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:36.339Z,1513246896.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:36.708Z,1513246896.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:36.761Z,1513246896.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:36.821Z,1513246896.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:37.113Z,1513246897.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:37.166Z,1513246897.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:37.169Z,1513246897.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:37.483Z,1513246897.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:37.535Z,1513246897.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:37.885Z,1513246897.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:37.966Z,1513246897.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:37.968Z,1513246897.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:38.290Z,1513246898.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:38.318Z,1513246898.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:38.680Z,1513246898.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:38.699Z,1513246898.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:38.762Z,1513246898.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:39.086Z,1513246899.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:39.115Z,1513246899.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:39.169Z,1513246899.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:39.497Z,1513246899.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:39.541Z,1513246899.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:39.906Z,1513246899.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:39.953Z,1513246899.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:39.966Z,1513246899.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:40.298Z,1513246900.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:40.417Z,1513246900.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:40.690Z,1513246900.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:40.727Z,1513246900.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:40.762Z,1513246900.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:41.104Z,1513246901.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:41.143Z,1513246901.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:41.165Z,1513246901.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:41.486Z,1513246901.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:41.508Z,1513246901.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:41.891Z,1513246901.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:41.912Z,1513246901.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:41.962Z,1513246901.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:42.757Z,1513246902.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:43.161Z,1513246903.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:43.958Z,1513246903.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:44.754Z,1513246904.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:45.157Z,1513246905.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:45.954Z,1513246905.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:46.749Z,1513246906.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:47.153Z,1513246907.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:47.238Z,1513246907.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:47.303Z,1513246907.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:47.398Z,1513246907.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:47.438Z,1513246907.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:47.795Z,1513246907.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:47.814Z,1513246907.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:47.949Z,1513246907.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:48.196Z,1513246908.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:48.211Z,1513246908.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:48.571Z,1513246908.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:48.597Z,1513246908.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:48.748Z,1513246908.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:49.020Z,1513246909.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:49.075Z,1513246909.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:49.153Z,1513246909.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:49.368Z,1513246909.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:49.406Z,1513246909.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:49.779Z,1513246909.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:49.847Z,1513246909.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:49.950Z,1513246909.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:50.167Z,1513246910.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:50.203Z,1513246910.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:50.593Z,1513246910.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:50.608Z,1513246910.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:50.748Z,1513246910.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:50.986Z,1513246910.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:51.019Z,1513246911.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:51.161Z,1513246911.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:51.390Z,1513246911.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:51.412Z,1513246911.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:51.773Z,1513246911.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:51.787Z,1513246911.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:51.957Z,1513246911.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:52.173Z,1513246912.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:52.188Z,1513246912.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:52.576Z,1513246912.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:52.591Z,1513246912.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:52.753Z,1513246912.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:52.975Z,1513246912.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:52.995Z,1513246912.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:53.157Z,1513246913.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:53.410Z,1513246913.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:53.425Z,1513246913.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:53.785Z,1513246913.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:53.808Z,1513246913.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:53.953Z,1513246913.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:54.177Z,1513246914.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:54.196Z,1513246914.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:54.581Z,1513246914.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:54.596Z,1513246914.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:54.749Z,1513246914.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:54.970Z,1513246914.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:54.994Z,1513246914.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:55.153Z,1513246915.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:55.375Z,1513246915.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:55.389Z,1513246915.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:55.774Z,1513246915.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:55.794Z,1513246915.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:55.950Z,1513246915.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:56.175Z,1513246916.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:56.195Z,1513246916.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:56.582Z,1513246916.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:56.597Z,1513246916.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:56.746Z,1513246916.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:56.982Z,1513246916.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:56.997Z,1513246916.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:57.149Z,1513246917.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:57.382Z,1513246917.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:57.397Z,1513246917.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:57.825Z,1513246917.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:57.839Z,1513246917.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:57.946Z,1513246917.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:58.179Z,1513246918.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:58.230Z,1513246918.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:58.592Z,1513246918.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:58.624Z,1513246918.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:58.741Z,1513246918.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:58.981Z,1513246918.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:58.996Z,1513246918.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:59.146Z,1513246919.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:59.380Z,1513246919.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:59.395Z,1513246919.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:59.781Z,1513246919.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:21:59.803Z,1513246919.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:21:59.942Z,1513246919.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:00.180Z,1513246920.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:00.198Z,1513246920.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:00.575Z,1513246920.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:00.595Z,1513246920.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:00.737Z,1513246920.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:00.971Z,1513246920.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:00.994Z,1513246920.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:01.141Z,1513246921.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:01.391Z,1513246921.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:01.537Z,1513246921.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:01.778Z,1513246921.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:01.793Z,1513246921.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:01.938Z,1513246921.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:02.178Z,1513246922.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:02.230Z,1513246922.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:02.584Z,1513246922.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:02.603Z,1513246922.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:02.735Z,1513246922.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:02.985Z,1513246922.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:02.000Z,1513246923.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:03.141Z,1513246923.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:03.386Z,1513246923.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:03.400Z,1513246923.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:03.781Z,1513246923.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:03.795Z,1513246923.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:03.937Z,1513246923.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:04.179Z,1513246924.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:04.199Z,1513246924.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:04.580Z,1513246924.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:04.596Z,1513246924.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:04.738Z,1513246924.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:04.984Z,1513246924.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:04.999Z,1513246924.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:05.146Z,1513246925.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:05.379Z,1513246925.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:05.414Z,1513246925.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:05.791Z,1513246925.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:05.806Z,1513246925.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:05.942Z,1513246925.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:06.196Z,1513246926.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:06.215Z,1513246926.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:06.567Z,1513246926.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:06.600Z,1513246926.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:06.737Z,1513246926.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:06.966Z,1513246926.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:07.002Z,1513246927.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:07.141Z,1513246927.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:07.366Z,1513246927.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:07.406Z,1513246927.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:07.771Z,1513246927.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:07.806Z,1513246927.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:07.940Z,1513246927.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:08.178Z,1513246928.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:08.200Z,1513246928.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:08.653Z,1513246928.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:08.734Z,1513246928.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:08.746Z,1513246928.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:08.982Z,1513246928.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:09.004Z,1513246929.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:09.137Z,1513246929.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:09.386Z,1513246929.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:09.412Z,1513246929.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:09.767Z,1513246929.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:09.806Z,1513246929.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:09.933Z,1513246929.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:10.182Z,1513246930.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:10.254Z,1513246930.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:10.590Z,1513246930.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:10.606Z,1513246930.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:10.729Z,1513246930.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:10.967Z,1513246930.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:11.015Z,1513246931.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:11.133Z,1513246931.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:11.374Z,1513246931.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:11.401Z,1513246931.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:11.787Z,1513246931.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:11.911Z,1513246931.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:11.930Z,1513246931.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:12.177Z,1513246932.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:12.208Z,1513246932.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:12.567Z,1513246932.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:12.603Z,1513246932.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:12.725Z,1513246932.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:12.967Z,1513246932.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:12.984Z,1513246932.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:13.129Z,1513246933.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:13.371Z,1513246933.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:13.385Z,1513246933.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:13.774Z,1513246933.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:13.788Z,1513246933.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:13.926Z,1513246933.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:14.184Z,1513246934.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:14.217Z,1513246934.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:14.577Z,1513246934.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:14.592Z,1513246934.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:14.721Z,1513246934.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:14.993Z,1513246934.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:15.125Z,1513246935.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:15.141Z,1513246935.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:15.390Z,1513246935.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:15.419Z,1513246935.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:15.778Z,1513246935.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:15.794Z,1513246935.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:15.922Z,1513246935.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:16.172Z,1513246936.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:16.195Z,1513246936.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:16.574Z,1513246936.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:16.589Z,1513246936.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:16.719Z,1513246936.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:16.979Z,1513246936.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:16.993Z,1513246936.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:17.137Z,1513246937.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:17.387Z,1513246937.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:17.417Z,1513246937.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:17.781Z,1513246937.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:17.796Z,1513246937.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:17.934Z,1513246937.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:18.181Z,1513246938.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:18.214Z,1513246938.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:18.574Z,1513246938.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:18.589Z,1513246938.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:18.737Z,1513246938.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:18.972Z,1513246938.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:18.991Z,1513246938.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:19.146Z,1513246939.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:19.372Z,1513246939.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:19.387Z,1513246939.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:19.776Z,1513246939.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:19.792Z,1513246939.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:19.942Z,1513246939.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:20.175Z,1513246940.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:20.226Z,1513246940.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:20.574Z,1513246940.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:20.600Z,1513246940.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:20.737Z,1513246940.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:20.985Z,1513246940.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:21.000Z,1513246941.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:21.141Z,1513246941.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:21.396Z,1513246941.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:21.483Z,1513246941.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:21.775Z,1513246941.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:21.790Z,1513246941.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:21.937Z,1513246941.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:22.175Z,1513246942.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:22.191Z,1513246942.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:22.574Z,1513246942.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:22.590Z,1513246942.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:22.733Z,1513246942.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:22.975Z,1513246942.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:22.990Z,1513246942.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:23.137Z,1513246943.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:23.390Z,1513246943.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:23.425Z,1513246943.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:23.789Z,1513246943.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:23.804Z,1513246943.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:23.933Z,1513246943.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:24.186Z,1513246944.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:24.200Z,1513246944.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:24.574Z,1513246944.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:24.592Z,1513246944.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:24.730Z,1513246944.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:24.969Z,1513246944.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:24.999Z,1513246944.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:25.133Z,1513246945.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:25.380Z,1513246945.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:25.394Z,1513246945.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:25.792Z,1513246945.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:25.872Z,1513246945.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:25.930Z,1513246945.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:26.179Z,1513246946.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:26.194Z,1513246946.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:26.587Z,1513246946.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:26.607Z,1513246946.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:26.725Z,1513246946.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:26.990Z,1513246946.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:27.005Z,1513246947.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:27.129Z,1513246947.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:27.386Z,1513246947.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:27.400Z,1513246947.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:27.810Z,1513246947.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:27.842Z,1513246947.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:27.927Z,1513246947.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:28.189Z,1513246948.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:28.204Z,1513246948.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:28.581Z,1513246948.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:28.596Z,1513246948.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:28.721Z,1513246948.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:28.967Z,1513246948.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:29.011Z,1513246949.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:29.125Z,1513246949.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:29.390Z,1513246949.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:29.411Z,1513246949.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:29.790Z,1513246949.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:29.812Z,1513246949.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:29.922Z,1513246949.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:30.191Z,1513246950.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:30.207Z,1513246950.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:30.568Z,1513246950.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:30.630Z,1513246950.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:30.719Z,1513246950.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:30.973Z,1513246950.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:31.024Z,1513246951.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:31.138Z,1513246951.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:31.376Z,1513246951.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:31.399Z,1513246951.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:31.796Z,1513246951.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:31.898Z,1513246951.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:31.934Z,1513246951.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:32.170Z,1513246952.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:32.243Z,1513246952.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:32.591Z,1513246952.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:32.605Z,1513246952.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:32.731Z,1513246952.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:32.987Z,1513246952.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:33.007Z,1513246953.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:33.141Z,1513246953.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:33.384Z,1513246953.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:33.436Z,1513246953.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:33.766Z,1513246953.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:33.796Z,1513246953.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:33.937Z,1513246953.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:34.186Z,1513246954.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:34.243Z,1513246954.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:34.567Z,1513246954.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:34.592Z,1513246954.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:34.733Z,1513246954.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:34.971Z,1513246954.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:34.998Z,1513246954.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:35.137Z,1513246955.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:35.388Z,1513246955.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:35.402Z,1513246955.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:35.790Z,1513246955.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:35.805Z,1513246955.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:35.933Z,1513246955.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:36.184Z,1513246956.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:36.203Z,1513246956.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:36.567Z,1513246956.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:36.591Z,1513246956.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:36.730Z,1513246956.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:36.971Z,1513246956.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:37.018Z,1513246957.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:37.134Z,1513246957.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:37.370Z,1513246957.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:37.396Z,1513246957.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:37.768Z,1513246957.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:37.799Z,1513246957.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:37.931Z,1513246957.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:38.167Z,1513246958.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:38.203Z,1513246958.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:38.577Z,1513246958.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:38.603Z,1513246958.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:38.725Z,1513246958.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:38.989Z,1513246958.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:39.004Z,1513246959.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:39.129Z,1513246959.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:39.394Z,1513246959.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:39.409Z,1513246959.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:39.768Z,1513246959.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:39.804Z,1513246959.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:39.925Z,1513246959.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:40.166Z,1513246960.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:40.189Z,1513246960.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:40.597Z,1513246960.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:40.616Z,1513246960.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:40.722Z,1513246960.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:40.975Z,1513246960.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:41.012Z,1513246961.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:41.125Z,1513246961.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:41.389Z,1513246961.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:41.420Z,1513246961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:41.785Z,1513246961.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:41.807Z,1513246961.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:41.922Z,1513246961.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:42.189Z,1513246962.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:42.219Z,1513246962.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:42.717Z,1513246962.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:43.121Z,1513246963.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:43.918Z,1513246963.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:44.715Z,1513246964.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:45.146Z,1513246965.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:45.678Z,1513246965.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:45.727Z,1513246965.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:45.834Z,1513246965.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:45.873Z,1513246965.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:45.943Z,1513246965.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:46.211Z,1513246966.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:46.226Z,1513246966.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:46.616Z,1513246966.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:46.632Z,1513246966.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:46.739Z,1513246966.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:47.030Z,1513246967.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:47.050Z,1513246967.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:47.150Z,1513246967.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:47.395Z,1513246967.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:47.427Z,1513246967.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:47.847Z,1513246967.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:47.893Z,1513246967.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:47.946Z,1513246967.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:48.192Z,1513246968.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:48.235Z,1513246968.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:48.601Z,1513246968.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:48.631Z,1513246968.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:48.741Z,1513246968.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:49.013Z,1513246969.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:49.034Z,1513246969.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:49.146Z,1513246969.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:49.401Z,1513246969.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:49.435Z,1513246969.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:49.797Z,1513246969.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:49.812Z,1513246969.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:49.941Z,1513246969.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:50.207Z,1513246970.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:50.243Z,1513246970.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:50.608Z,1513246970.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:50.623Z,1513246970.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:50.737Z,1513246970.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:51.003Z,1513246971.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:51.018Z,1513246971.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:51.141Z,1513246971.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:51.404Z,1513246971.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:51.419Z,1513246971.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:51.809Z,1513246971.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:51.824Z,1513246971.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:51.939Z,1513246971.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:52.210Z,1513246972.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:52.226Z,1513246972.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:52.603Z,1513246972.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:52.630Z,1513246972.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:52.734Z,1513246972.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:52.991Z,1513246972.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:53.007Z,1513246973.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:53.137Z,1513246973.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:53.412Z,1513246973.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:53.437Z,1513246973.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:53.808Z,1513246973.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:53.843Z,1513246973.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:53.935Z,1513246973.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:54.201Z,1513246974.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:54.216Z,1513246974.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:54.605Z,1513246974.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:54.627Z,1513246974.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:54.729Z,1513246974.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:55.006Z,1513246975.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:55.021Z,1513246975.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:55.133Z,1513246975.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:55.404Z,1513246975.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:55.423Z,1513246975.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:55.799Z,1513246975.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:55.815Z,1513246975.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:55.929Z,1513246975.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:56.198Z,1513246976.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:56.213Z,1513246976.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:56.599Z,1513246976.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:56.694Z,1513246976.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:56.726Z,1513246976.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:56.990Z,1513246976.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:56.998Z,1513246976.998 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T10:22:56.999Z,1513246976.999 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:22:56.999Z,1513246976.999 [BPC1](ERROR): Data Fault
2017-12-14T10:22:57.039Z,1513246977.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:57.078Z,1513246977.078 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:22:57.129Z,1513246977.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:57.415Z,1513246977.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:57.430Z,1513246977.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:57.824Z,1513246977.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:57.839Z,1513246977.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:57.926Z,1513246977.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:58.216Z,1513246978.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:58.260Z,1513246978.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:58.308Z,1513246978.308 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:22:58.308Z,1513246978.308 [BPC1] No Fault, FailCount= 1
2017-12-14T10:22:58.588Z,1513246978.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:58.727Z,1513246978.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:58.739Z,1513246978.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:58.999Z,1513246978.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:59.019Z,1513246979.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:59.149Z,1513246979.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:59.400Z,1513246979.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:59.414Z,1513246979.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:59.804Z,1513246979.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:22:59.818Z,1513246979.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:22:59.947Z,1513246979.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:00.213Z,1513246980.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:00.227Z,1513246980.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:00.611Z,1513246980.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:00.626Z,1513246980.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:00.741Z,1513246980.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:01.005Z,1513246981.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:01.039Z,1513246981.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:01.146Z,1513246981.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:01.405Z,1513246981.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:01.432Z,1513246981.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:01.795Z,1513246981.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:01.809Z,1513246981.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:01.941Z,1513246981.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:02.192Z,1513246982.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:02.207Z,1513246982.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:02.601Z,1513246982.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:02.616Z,1513246982.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:02.737Z,1513246982.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:03.027Z,1513246983.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:03.109Z,1513246983.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:03.141Z,1513246983.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:03.408Z,1513246983.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:03.431Z,1513246983.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:03.812Z,1513246983.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:03.827Z,1513246983.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:03.938Z,1513246983.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:04.207Z,1513246984.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:04.233Z,1513246984.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:04.591Z,1513246984.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:04.617Z,1513246984.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:04.734Z,1513246984.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:04.990Z,1513246984.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:05.026Z,1513246985.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:05.137Z,1513246985.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:05.391Z,1513246985.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:05.416Z,1513246985.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:05.792Z,1513246985.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:05.817Z,1513246985.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:05.934Z,1513246985.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:06.213Z,1513246986.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:06.240Z,1513246986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:06.607Z,1513246986.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:06.632Z,1513246986.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:06.729Z,1513246986.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:07.009Z,1513246987.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:07.058Z,1513246987.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:07.135Z,1513246987.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:07.409Z,1513246987.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:07.424Z,1513246987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:07.804Z,1513246987.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:07.819Z,1513246987.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:07.930Z,1513246987.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:08.194Z,1513246988.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:08.227Z,1513246988.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:08.600Z,1513246988.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:08.619Z,1513246988.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:08.725Z,1513246988.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:09.001Z,1513246989.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:09.015Z,1513246989.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:09.129Z,1513246989.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:09.411Z,1513246989.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:09.426Z,1513246989.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:09.813Z,1513246989.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:09.846Z,1513246989.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:09.926Z,1513246989.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:10.210Z,1513246990.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:10.224Z,1513246990.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:10.599Z,1513246990.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:10.620Z,1513246990.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:10.721Z,1513246990.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:11.008Z,1513246991.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:11.024Z,1513246991.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:11.125Z,1513246991.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:11.398Z,1513246991.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:11.424Z,1513246991.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:11.804Z,1513246991.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:11.820Z,1513246991.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:12.194Z,1513246992.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:12.220Z,1513246992.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:12.661Z,1513246992.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:12.761Z,1513246992.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:13.005Z,1513246993.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:13.040Z,1513246993.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:13.419Z,1513246993.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:13.434Z,1513246993.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:13.791Z,1513246993.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:13.834Z,1513246993.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:14.194Z,1513246994.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:14.232Z,1513246994.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:14.592Z,1513246994.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:14.606Z,1513246994.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:14.990Z,1513246994.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:15.011Z,1513246995.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:15.406Z,1513246995.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:15.432Z,1513246995.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:15.805Z,1513246995.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:15.841Z,1513246995.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:16.209Z,1513246996.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:16.239Z,1513246996.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:16.595Z,1513246996.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:16.635Z,1513246996.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:17.000Z,1513246997.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:17.015Z,1513246997.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:17.400Z,1513246997.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:17.448Z,1513246997.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:17.796Z,1513246997.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:17.823Z,1513246997.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:18.202Z,1513246998.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:18.218Z,1513246998.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:18.608Z,1513246998.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:18.632Z,1513246998.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:19.025Z,1513246999.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:19.107Z,1513246999.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:19.410Z,1513246999.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:19.425Z,1513246999.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:19.808Z,1513246999.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:19.823Z,1513246999.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:20.197Z,1513247000.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:20.255Z,1513247000.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:20.600Z,1513247000.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:20.619Z,1513247000.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:20.000Z,1513247001.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:21.056Z,1513247001.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:21.414Z,1513247001.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:21.428Z,1513247001.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:21.817Z,1513247001.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:21.832Z,1513247001.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:22.215Z,1513247002.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:22.308Z,1513247002.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:22.591Z,1513247002.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:22.624Z,1513247002.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:22.995Z,1513247002.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:23.032Z,1513247003.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:23.391Z,1513247003.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:23.434Z,1513247003.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:23.789Z,1513247003.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:23.804Z,1513247003.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:24.196Z,1513247004.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:24.212Z,1513247004.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:24.602Z,1513247004.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:24.633Z,1513247004.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:25.006Z,1513247005.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:25.038Z,1513247005.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:25.413Z,1513247005.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:25.445Z,1513247005.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:25.799Z,1513247005.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:25.819Z,1513247005.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:26.194Z,1513247006.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:26.209Z,1513247006.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:26.599Z,1513247006.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:26.619Z,1513247006.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:27.007Z,1513247007.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:27.022Z,1513247007.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:27.413Z,1513247007.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:27.444Z,1513247007.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:27.805Z,1513247007.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:27.819Z,1513247007.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:28.213Z,1513247008.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:28.227Z,1513247008.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:28.590Z,1513247008.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:28.612Z,1513247008.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:28.997Z,1513247008.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:29.012Z,1513247009.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:29.398Z,1513247009.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:29.452Z,1513247009.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:29.793Z,1513247009.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:29.808Z,1513247009.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:30.199Z,1513247010.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:30.213Z,1513247010.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:30.617Z,1513247010.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:30.642Z,1513247010.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:31.028Z,1513247011.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:31.043Z,1513247011.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:31.413Z,1513247011.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:31.447Z,1513247011.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:31.803Z,1513247011.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:31.818Z,1513247011.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:32.191Z,1513247012.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:32.216Z,1513247012.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:32.591Z,1513247012.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:32.624Z,1513247012.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:32.991Z,1513247012.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:33.030Z,1513247013.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:33.415Z,1513247013.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:33.430Z,1513247013.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:33.814Z,1513247013.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:33.829Z,1513247013.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:34.216Z,1513247014.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:34.231Z,1513247014.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:34.590Z,1513247014.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:34.647Z,1513247014.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:34.994Z,1513247014.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:35.058Z,1513247015.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:35.390Z,1513247015.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:35.427Z,1513247015.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:35.796Z,1513247015.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:35.827Z,1513247015.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:36.191Z,1513247016.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:36.226Z,1513247016.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:36.574Z,1513247016.574 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:23:36.574Z,1513247016.574 [NAL9602] Data Fault, FailCount= 4
2017-12-14T10:23:36.574Z,1513247016.574 [NAL9602](ERROR): Data Fault
2017-12-14T10:23:36.591Z,1513247016.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:36.627Z,1513247016.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:36.652Z,1513247016.652 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:23:36.974Z,1513247016.974 [NAL9602](INFO): Powering down
2017-12-14T10:23:36.992Z,1513247016.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:37.027Z,1513247017.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:37.390Z,1513247017.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:37.411Z,1513247017.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:37.794Z,1513247017.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:37.808Z,1513247017.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:37.842Z,1513247017.842 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:23:37.842Z,1513247017.842 [NAL9602] No Fault, FailCount= 4
2017-12-14T10:23:38.214Z,1513247018.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:38.245Z,1513247018.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:38.612Z,1513247018.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:38.626Z,1513247018.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:38.990Z,1513247018.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:39.022Z,1513247019.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:39.390Z,1513247019.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:39.421Z,1513247019.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:39.790Z,1513247019.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:39.826Z,1513247019.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:40.195Z,1513247020.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:40.226Z,1513247020.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:40.594Z,1513247020.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:40.631Z,1513247020.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:40.997Z,1513247020.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:41.019Z,1513247021.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:41.435Z,1513247021.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:41.470Z,1513247021.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:41.801Z,1513247021.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:41.862Z,1513247021.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:41.878Z,1513247021.878 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T10:18:41.6Z
2017-12-14T10:23:41.878Z,1513247021.878 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:23:41.878Z,1513247021.878 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:23:42.201Z,1513247022.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:42.216Z,1513247022.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:43.946Z,1513247023.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:44.742Z,1513247024.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:45.146Z,1513247025.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:45.943Z,1513247025.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:46.169Z,1513247026.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:46.222Z,1513247026.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:46.222Z,1513247026.222 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197
2017-12-14T10:23:46.222Z,1513247026.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:23:46.224Z,1513247026.224 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:46.224Z,1513247026.224 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 197
2017-12-14T10:23:46.224Z,1513247026.224 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:23:46.226Z,1513247026.226 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:46.226Z,1513247026.226 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197
2017-12-14T10:23:46.226Z,1513247026.226 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:23:46.238Z,1513247026.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:23:46.238Z,1513247026.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:23:46.239Z,1513247026.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:23:46.313Z,1513247026.313 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0228.lzma
2017-12-14T10:23:46.355Z,1513247026.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:46.469Z,1513247026.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:23:46.469Z,1513247026.469 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197
2017-12-14T10:23:46.469Z,1513247026.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:23:46.469Z,1513247026.469 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 197
2017-12-14T10:23:46.470Z,1513247026.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:23:46.470Z,1513247026.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197
2017-12-14T10:23:46.675Z,1513247026.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:46.714Z,1513247026.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:23:46.715Z,1513247026.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:23:46.715Z,1513247026.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:23:46.715Z,1513247026.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:23:46.716Z,1513247026.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:23:46.716Z,1513247026.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:23:46.716Z,1513247026.716 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:23:46.717Z,1513247026.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:23:46.717Z,1513247026.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:23:46.738Z,1513247026.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:47.051Z,1513247027.051 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0228.lzma.bak
2017-12-14T10:23:47.052Z,1513247027.052 [DataOverHttps](INFO): SBD MOMSN=5438519
2017-12-14T10:23:47.080Z,1513247027.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:47.114Z,1513247027.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:47.141Z,1513247027.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:47.939Z,1513247027.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:48.379Z,1513247028.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:48.431Z,1513247028.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:48.526Z,1513247028.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:48.559Z,1513247028.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:48.733Z,1513247028.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:49.137Z,1513247029.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:49.934Z,1513247029.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:50.729Z,1513247030.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:51.133Z,1513247031.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:52.036Z,1513247032.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:52.059Z,1513247032.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:52.160Z,1513247032.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:52.199Z,1513247032.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:52.518Z,1513247032.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:52.540Z,1513247032.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:52.918Z,1513247032.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:52.933Z,1513247032.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:53.311Z,1513247033.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:53.326Z,1513247033.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:53.718Z,1513247033.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:53.732Z,1513247033.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:57.219Z,1513247037.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:57.262Z,1513247037.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:57.354Z,1513247037.354 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0229.lzma
2017-12-14T10:23:57.409Z,1513247037.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:57.460Z,1513247037.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:57.711Z,1513247037.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:57.731Z,1513247037.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:58.087Z,1513247038.087 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0229.lzma.bak
2017-12-14T10:23:58.088Z,1513247038.088 [DataOverHttps](INFO): SBD MOMSN=5438523
2017-12-14T10:23:58.126Z,1513247038.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:58.160Z,1513247038.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:59.258Z,1513247039.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:59.274Z,1513247039.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:59.277Z,1513247039.277 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:23:59.277Z,1513247039.277 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:23:59.277Z,1513247039.277 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:23:59.369Z,1513247039.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:23:59.415Z,1513247039.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:23:59.934Z,1513247039.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:00.730Z,1513247040.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:01.133Z,1513247041.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:01.930Z,1513247041.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:02.725Z,1513247042.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:02.846Z,1513247042.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:02.861Z,1513247042.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:03.002Z,1513247043.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:03.032Z,1513247043.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:03.129Z,1513247043.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:03.330Z,1513247043.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:03.344Z,1513247043.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:03.716Z,1513247043.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:03.731Z,1513247043.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:03.926Z,1513247043.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:04.110Z,1513247044.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:04.142Z,1513247044.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:04.510Z,1513247044.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:04.547Z,1513247044.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:04.721Z,1513247044.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:04.910Z,1513247044.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:04.946Z,1513247044.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:05.125Z,1513247045.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:05.314Z,1513247045.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:05.348Z,1513247045.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:05.711Z,1513247045.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:05.751Z,1513247045.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:06.114Z,1513247046.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:06.147Z,1513247046.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:06.510Z,1513247046.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:06.542Z,1513247046.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:06.951Z,1513247046.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:06.976Z,1513247046.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:07.310Z,1513247047.310 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:24:07.327Z,1513247047.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:07.367Z,1513247047.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:07.713Z,1513247047.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:07.728Z,1513247047.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:08.119Z,1513247048.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:08.134Z,1513247048.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:08.516Z,1513247048.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:08.532Z,1513247048.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:08.920Z,1513247048.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:08.935Z,1513247048.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:09.320Z,1513247049.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:09.367Z,1513247049.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:09.718Z,1513247049.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:09.768Z,1513247049.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:10.152Z,1513247050.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:10.191Z,1513247050.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:10.529Z,1513247050.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:10.544Z,1513247050.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:10.916Z,1513247050.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:10.970Z,1513247050.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:11.315Z,1513247051.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:11.335Z,1513247051.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:11.719Z,1513247051.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:11.771Z,1513247051.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:12.116Z,1513247052.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:12.131Z,1513247052.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:12.519Z,1513247052.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:12.533Z,1513247052.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:12.915Z,1513247052.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:12.934Z,1513247052.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:13.342Z,1513247053.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:13.388Z,1513247053.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:13.710Z,1513247053.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:13.742Z,1513247053.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:14.138Z,1513247054.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:14.160Z,1513247054.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:14.510Z,1513247054.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:14.524Z,1513247054.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:14.915Z,1513247054.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:15.014Z,1513247055.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:15.314Z,1513247055.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:15.349Z,1513247055.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:15.704Z,1513247055.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:15.719Z,1513247055.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:16.110Z,1513247056.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:16.125Z,1513247056.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:16.570Z,1513247056.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:16.629Z,1513247056.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:16.919Z,1513247056.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:16.933Z,1513247056.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:17.315Z,1513247057.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:17.334Z,1513247057.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:17.730Z,1513247057.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:17.744Z,1513247057.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:18.122Z,1513247058.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:18.151Z,1513247058.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:18.490Z,1513247058.490 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:24:18.518Z,1513247058.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:18.675Z,1513247058.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:18.919Z,1513247058.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:18.934Z,1513247058.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:19.329Z,1513247059.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:19.345Z,1513247059.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:19.768Z,1513247059.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:19.835Z,1513247059.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:20.134Z,1513247060.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:20.152Z,1513247060.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:20.519Z,1513247060.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:20.541Z,1513247060.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:20.930Z,1513247060.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:20.945Z,1513247060.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:21.324Z,1513247061.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:21.339Z,1513247061.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:21.729Z,1513247061.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:21.756Z,1513247061.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:22.126Z,1513247062.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:22.152Z,1513247062.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:22.521Z,1513247062.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:22.553Z,1513247062.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:22.924Z,1513247062.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:22.969Z,1513247062.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:23.320Z,1513247063.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:23.335Z,1513247063.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:23.719Z,1513247063.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:23.733Z,1513247063.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:24.117Z,1513247064.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:24.132Z,1513247064.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:24.519Z,1513247064.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:24.535Z,1513247064.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:25.026Z,1513247065.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:25.113Z,1513247065.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:25.318Z,1513247065.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:25.332Z,1513247065.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:25.725Z,1513247065.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:25.739Z,1513247065.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:26.130Z,1513247066.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:26.169Z,1513247066.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:26.519Z,1513247066.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:26.534Z,1513247066.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:26.936Z,1513247066.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:26.972Z,1513247066.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:27.319Z,1513247067.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:27.343Z,1513247067.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:27.726Z,1513247067.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:27.741Z,1513247067.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:28.132Z,1513247068.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:28.163Z,1513247068.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:28.533Z,1513247068.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:28.547Z,1513247068.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:28.936Z,1513247068.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:28.959Z,1513247068.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:29.339Z,1513247069.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:29.362Z,1513247069.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:29.711Z,1513247069.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:29.746Z,1513247069.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:30.112Z,1513247070.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:30.146Z,1513247070.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:30.532Z,1513247070.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:30.546Z,1513247070.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:30.930Z,1513247070.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:30.952Z,1513247070.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:31.330Z,1513247071.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:31.359Z,1513247071.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:31.736Z,1513247071.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:31.775Z,1513247071.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:32.111Z,1513247072.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:32.163Z,1513247072.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:32.552Z,1513247072.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:32.579Z,1513247072.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:32.920Z,1513247072.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:32.967Z,1513247072.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:33.320Z,1513247073.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:33.334Z,1513247073.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:33.722Z,1513247073.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:33.804Z,1513247073.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:34.134Z,1513247074.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:34.155Z,1513247074.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:34.520Z,1513247074.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:34.547Z,1513247074.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:34.911Z,1513247074.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:34.947Z,1513247074.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:35.311Z,1513247075.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:35.346Z,1513247075.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:35.708Z,1513247075.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:35.799Z,1513247075.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:36.112Z,1513247076.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:36.143Z,1513247076.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:36.511Z,1513247076.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:36.525Z,1513247076.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:36.926Z,1513247076.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:36.953Z,1513247076.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:37.354Z,1513247077.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:37.397Z,1513247077.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:37.722Z,1513247077.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:37.755Z,1513247077.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:38.108Z,1513247078.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:38.122Z,1513247078.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:38.517Z,1513247078.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:38.532Z,1513247078.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:38.959Z,1513247078.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:39.002Z,1513247079.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:39.313Z,1513247079.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:39.366Z,1513247079.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:39.729Z,1513247079.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:39.753Z,1513247079.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:40.133Z,1513247080.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:40.153Z,1513247080.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:40.521Z,1513247080.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:40.552Z,1513247080.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:40.912Z,1513247080.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:40.928Z,1513247080.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:41.316Z,1513247081.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:41.359Z,1513247081.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:41.713Z,1513247081.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:41.728Z,1513247081.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:42.132Z,1513247082.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:42.207Z,1513247082.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:42.521Z,1513247082.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:42.536Z,1513247082.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:42.929Z,1513247082.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:42.962Z,1513247082.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:43.335Z,1513247083.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:43.362Z,1513247083.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:43.730Z,1513247083.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:43.763Z,1513247083.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:44.115Z,1513247084.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:44.130Z,1513247084.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:44.527Z,1513247084.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:44.560Z,1513247084.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:44.924Z,1513247084.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:44.961Z,1513247084.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:45.316Z,1513247085.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:45.380Z,1513247085.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:45.730Z,1513247085.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:45.751Z,1513247085.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:46.135Z,1513247086.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:46.151Z,1513247086.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:46.529Z,1513247086.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:46.544Z,1513247086.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:46.932Z,1513247086.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:46.947Z,1513247086.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:47.311Z,1513247087.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:47.343Z,1513247087.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:47.711Z,1513247087.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:47.746Z,1513247087.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:48.111Z,1513247088.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:48.136Z,1513247088.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:48.510Z,1513247088.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:48.539Z,1513247088.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:48.932Z,1513247088.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:48.946Z,1513247088.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:49.338Z,1513247089.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:49.353Z,1513247089.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:49.731Z,1513247089.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:49.751Z,1513247089.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:50.115Z,1513247090.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:50.143Z,1513247090.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:50.511Z,1513247090.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:50.542Z,1513247090.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:50.911Z,1513247090.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:50.942Z,1513247090.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:51.311Z,1513247091.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:51.351Z,1513247091.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:51.767Z,1513247091.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:51.796Z,1513247091.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:52.126Z,1513247092.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:52.159Z,1513247092.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:52.525Z,1513247092.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:52.559Z,1513247092.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:52.911Z,1513247092.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:52.947Z,1513247092.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:53.315Z,1513247093.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:53.355Z,1513247093.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:53.710Z,1513247093.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:53.725Z,1513247093.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:54.119Z,1513247094.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:54.156Z,1513247094.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:54.520Z,1513247094.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:54.581Z,1513247094.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:54.933Z,1513247094.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:54.960Z,1513247094.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:55.333Z,1513247095.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:55.402Z,1513247095.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:55.726Z,1513247095.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:55.740Z,1513247095.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:56.118Z,1513247096.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:56.166Z,1513247096.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:56.522Z,1513247096.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:56.536Z,1513247096.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:56.922Z,1513247096.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:56.937Z,1513247096.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:57.319Z,1513247097.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:57.335Z,1513247097.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:57.725Z,1513247097.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:57.763Z,1513247097.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:58.132Z,1513247098.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:58.163Z,1513247098.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:58.525Z,1513247098.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:58.543Z,1513247098.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:58.923Z,1513247098.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:58.942Z,1513247098.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:59.322Z,1513247099.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:59.338Z,1513247099.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:24:59.724Z,1513247099.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:24:59.738Z,1513247099.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:03.320Z,1513247103.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:03.335Z,1513247103.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:03.436Z,1513247103.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:03.478Z,1513247103.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:03.818Z,1513247103.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:03.834Z,1513247103.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:04.222Z,1513247104.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:04.265Z,1513247104.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:04.619Z,1513247104.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:04.634Z,1513247104.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:04.999Z,1513247104.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:05.039Z,1513247105.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:05.402Z,1513247105.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:05.442Z,1513247105.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:05.807Z,1513247105.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:05.838Z,1513247105.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:06.206Z,1513247106.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:06.243Z,1513247106.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:06.621Z,1513247106.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:06.662Z,1513247106.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:07.028Z,1513247107.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:07.044Z,1513247107.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:07.418Z,1513247107.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:07.440Z,1513247107.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:07.803Z,1513247107.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:07.819Z,1513247107.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:08.200Z,1513247108.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:08.215Z,1513247108.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:08.609Z,1513247108.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:08.624Z,1513247108.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:09.007Z,1513247109.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:09.022Z,1513247109.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:09.408Z,1513247109.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:09.447Z,1513247109.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:09.821Z,1513247109.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:09.836Z,1513247109.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:10.218Z,1513247110.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:10.232Z,1513247110.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:10.615Z,1513247110.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:10.632Z,1513247110.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:10.998Z,1513247110.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:11.023Z,1513247111.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:11.397Z,1513247111.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:11.431Z,1513247111.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:11.812Z,1513247111.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:11.827Z,1513247111.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:12.199Z,1513247112.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:12.238Z,1513247112.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:12.610Z,1513247112.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:12.631Z,1513247112.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:13.013Z,1513247113.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:13.029Z,1513247113.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:13.410Z,1513247113.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:13.444Z,1513247113.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:13.799Z,1513247113.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:13.870Z,1513247113.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:14.202Z,1513247114.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:14.235Z,1513247114.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:14.617Z,1513247114.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:14.631Z,1513247114.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:15.030Z,1513247115.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:15.070Z,1513247115.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:15.416Z,1513247115.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:15.424Z,1513247115.424 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T10:25:15.424Z,1513247115.424 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:25:15.424Z,1513247115.424 [BPC1](ERROR): Data Fault
2017-12-14T10:25:15.432Z,1513247115.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:15.466Z,1513247115.466 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:25:15.803Z,1513247115.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:15.826Z,1513247115.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:16.214Z,1513247116.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:16.228Z,1513247116.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:16.608Z,1513247116.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:16.623Z,1513247116.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:16.637Z,1513247116.637 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:25:16.637Z,1513247116.637 [BPC1] No Fault, FailCount= 1
2017-12-14T10:25:17.023Z,1513247117.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:17.131Z,1513247117.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:17.399Z,1513247117.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:17.433Z,1513247117.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:17.823Z,1513247117.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:17.838Z,1513247117.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:18.223Z,1513247118.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:18.238Z,1513247118.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:18.625Z,1513247118.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:18.639Z,1513247118.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:19.005Z,1513247119.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:19.020Z,1513247119.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:19.406Z,1513247119.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:19.421Z,1513247119.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:19.804Z,1513247119.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:19.818Z,1513247119.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:20.200Z,1513247120.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:20.240Z,1513247120.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:20.629Z,1513247120.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:20.652Z,1513247120.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:21.024Z,1513247121.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:21.043Z,1513247121.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:21.422Z,1513247121.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:21.437Z,1513247121.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:21.798Z,1513247121.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:21.830Z,1513247121.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:22.202Z,1513247122.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:22.228Z,1513247122.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:22.598Z,1513247122.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:22.631Z,1513247122.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:23.000Z,1513247123.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:23.035Z,1513247123.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:23.454Z,1513247123.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:23.502Z,1513247123.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:23.813Z,1513247123.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:23.840Z,1513247123.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:24.221Z,1513247124.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:24.243Z,1513247124.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:24.621Z,1513247124.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:24.644Z,1513247124.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:25.011Z,1513247125.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:25.044Z,1513247125.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:25.411Z,1513247125.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:25.456Z,1513247125.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:25.807Z,1513247125.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:25.822Z,1513247125.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:26.201Z,1513247126.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:26.216Z,1513247126.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:26.664Z,1513247126.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:26.703Z,1513247126.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:27.014Z,1513247127.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:27.028Z,1513247127.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:27.414Z,1513247127.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:27.428Z,1513247127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:27.810Z,1513247127.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:27.825Z,1513247127.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:28.210Z,1513247128.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:28.226Z,1513247128.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:28.607Z,1513247128.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:28.622Z,1513247128.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:29.006Z,1513247129.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:29.027Z,1513247129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:29.409Z,1513247129.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:29.423Z,1513247129.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:29.830Z,1513247129.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:29.923Z,1513247129.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:30.221Z,1513247130.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:30.258Z,1513247130.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:30.618Z,1513247130.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:30.639Z,1513247130.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:31.007Z,1513247131.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:31.027Z,1513247131.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:31.412Z,1513247131.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:31.431Z,1513247131.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:31.814Z,1513247131.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:31.828Z,1513247131.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:32.208Z,1513247132.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:32.224Z,1513247132.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:32.618Z,1513247132.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:32.633Z,1513247132.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:33.019Z,1513247133.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:33.067Z,1513247133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:33.410Z,1513247133.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:33.436Z,1513247133.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:33.807Z,1513247133.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:33.822Z,1513247133.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:34.207Z,1513247134.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:34.227Z,1513247134.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:34.618Z,1513247134.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:34.656Z,1513247134.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:35.022Z,1513247135.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:35.051Z,1513247135.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:35.421Z,1513247135.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:35.451Z,1513247135.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:35.803Z,1513247135.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:35.823Z,1513247135.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:36.222Z,1513247136.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:36.271Z,1513247136.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:36.621Z,1513247136.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:36.636Z,1513247136.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:37.012Z,1513247137.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:37.027Z,1513247137.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:37.409Z,1513247137.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:37.506Z,1513247137.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:37.817Z,1513247137.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:37.839Z,1513247137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:38.218Z,1513247138.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:38.267Z,1513247138.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:38.621Z,1513247138.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:38.643Z,1513247138.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:39.008Z,1513247139.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:39.070Z,1513247139.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:39.410Z,1513247139.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:39.428Z,1513247139.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:39.807Z,1513247139.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:39.827Z,1513247139.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:40.213Z,1513247140.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:40.228Z,1513247140.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:40.622Z,1513247140.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:40.636Z,1513247140.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:41.021Z,1513247141.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:41.036Z,1513247141.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:41.418Z,1513247141.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:41.433Z,1513247141.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:41.803Z,1513247141.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:41.825Z,1513247141.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:42.207Z,1513247142.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:42.223Z,1513247142.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:42.622Z,1513247142.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:42.645Z,1513247142.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:42.999Z,1513247142.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:43.031Z,1513247143.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:43.399Z,1513247143.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:43.427Z,1513247143.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:43.825Z,1513247143.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:43.840Z,1513247143.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:44.223Z,1513247144.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:44.238Z,1513247144.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:44.616Z,1513247144.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:44.636Z,1513247144.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:44.999Z,1513247144.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:45.031Z,1513247145.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:45.399Z,1513247145.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:45.424Z,1513247145.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:45.829Z,1513247145.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:45.916Z,1513247145.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:46.200Z,1513247146.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:46.226Z,1513247146.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:46.618Z,1513247146.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:46.633Z,1513247146.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:47.034Z,1513247147.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:47.049Z,1513247147.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:47.422Z,1513247147.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:47.494Z,1513247147.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:47.807Z,1513247147.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:47.847Z,1513247147.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:48.205Z,1513247148.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:48.219Z,1513247148.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:48.608Z,1513247148.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:48.627Z,1513247148.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:49.023Z,1513247149.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:49.043Z,1513247149.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:49.398Z,1513247149.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:49.435Z,1513247149.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:49.822Z,1513247149.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:49.837Z,1513247149.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:50.219Z,1513247150.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:50.239Z,1513247150.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:50.630Z,1513247150.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:50.645Z,1513247150.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:50.000Z,1513247151.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:51.028Z,1513247151.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:51.403Z,1513247151.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:51.434Z,1513247151.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:51.806Z,1513247151.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:51.842Z,1513247151.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:52.210Z,1513247152.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:52.275Z,1513247152.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:52.610Z,1513247152.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:52.626Z,1513247152.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:53.022Z,1513247153.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:53.057Z,1513247153.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:53.423Z,1513247153.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:53.462Z,1513247153.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:53.810Z,1513247153.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:53.827Z,1513247153.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:54.206Z,1513247154.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:54.220Z,1513247154.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:54.608Z,1513247154.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:54.623Z,1513247154.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:55.014Z,1513247155.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:55.030Z,1513247155.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:55.412Z,1513247155.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:55.427Z,1513247155.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:55.817Z,1513247155.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:55.832Z,1513247155.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:56.216Z,1513247156.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:56.232Z,1513247156.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:56.616Z,1513247156.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:56.635Z,1513247156.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:57.009Z,1513247157.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:57.023Z,1513247157.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:57.411Z,1513247157.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:57.426Z,1513247157.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:57.808Z,1513247157.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:57.823Z,1513247157.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:58.206Z,1513247158.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:58.231Z,1513247158.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:58.638Z,1513247158.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:58.670Z,1513247158.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:59.020Z,1513247159.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:59.040Z,1513247159.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:59.421Z,1513247159.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:59.511Z,1513247159.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:25:59.800Z,1513247159.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:25:59.839Z,1513247159.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:03.352Z,1513247163.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:03.399Z,1513247163.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:03.502Z,1513247163.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:03.529Z,1513247163.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:03.886Z,1513247163.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:03.924Z,1513247163.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:04.288Z,1513247164.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:04.302Z,1513247164.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:04.690Z,1513247164.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:04.717Z,1513247164.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:05.073Z,1513247165.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:05.120Z,1513247165.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:05.471Z,1513247165.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:05.511Z,1513247165.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:05.880Z,1513247165.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:05.910Z,1513247165.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:06.275Z,1513247166.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:06.311Z,1513247166.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:06.682Z,1513247166.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:06.717Z,1513247166.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:07.094Z,1513247167.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:07.123Z,1513247167.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:07.490Z,1513247167.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:07.516Z,1513247167.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:07.875Z,1513247167.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:07.905Z,1513247167.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:08.320Z,1513247168.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:08.423Z,1513247168.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:08.683Z,1513247168.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:08.703Z,1513247168.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:09.091Z,1513247169.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:09.106Z,1513247169.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:09.487Z,1513247169.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:09.502Z,1513247169.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:09.885Z,1513247169.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:09.906Z,1513247169.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:10.291Z,1513247170.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:10.305Z,1513247170.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:10.694Z,1513247170.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:10.709Z,1513247170.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:11.087Z,1513247171.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:11.102Z,1513247171.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:11.472Z,1513247171.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:11.508Z,1513247171.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:11.871Z,1513247171.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:11.907Z,1513247171.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:12.282Z,1513247172.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:12.320Z,1513247172.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:12.694Z,1513247172.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:12.708Z,1513247172.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:13.102Z,1513247173.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:13.116Z,1513247173.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:13.498Z,1513247173.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:13.524Z,1513247173.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:13.890Z,1513247173.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:13.904Z,1513247173.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:14.279Z,1513247174.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:14.308Z,1513247174.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:14.746Z,1513247174.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:14.798Z,1513247174.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:15.086Z,1513247175.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:15.113Z,1513247175.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:15.484Z,1513247175.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:15.519Z,1513247175.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:15.897Z,1513247175.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:15.923Z,1513247175.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:16.282Z,1513247176.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:16.304Z,1513247176.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:16.731Z,1513247176.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:16.780Z,1513247176.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:17.080Z,1513247177.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:17.103Z,1513247177.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:17.487Z,1513247177.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:17.502Z,1513247177.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:17.884Z,1513247177.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:17.935Z,1513247177.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:18.289Z,1513247178.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:18.402Z,1513247178.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:18.691Z,1513247178.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:18.746Z,1513247178.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:19.099Z,1513247179.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:19.119Z,1513247179.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:19.499Z,1513247179.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:19.524Z,1513247179.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:19.872Z,1513247179.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:19.946Z,1513247179.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:20.286Z,1513247180.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:20.315Z,1513247180.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:20.680Z,1513247180.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:20.726Z,1513247180.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:21.073Z,1513247181.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:21.119Z,1513247181.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:21.474Z,1513247181.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:21.527Z,1513247181.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:21.890Z,1513247181.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:21.929Z,1513247181.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:22.302Z,1513247182.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:22.390Z,1513247182.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:22.699Z,1513247182.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:22.738Z,1513247182.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:23.109Z,1513247183.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:23.153Z,1513247183.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:23.477Z,1513247183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:23.550Z,1513247183.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:23.898Z,1513247183.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:23.926Z,1513247183.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:24.277Z,1513247184.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:24.428Z,1513247184.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:24.683Z,1513247184.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:24.690Z,1513247184.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x41403 got:0x53818
2017-12-14T10:26:24.735Z,1513247184.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:25.090Z,1513247185.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:25.120Z,1513247185.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:25.502Z,1513247185.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:25.566Z,1513247185.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:25.876Z,1513247185.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:25.912Z,1513247185.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:26.298Z,1513247186.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:26.347Z,1513247186.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:26.704Z,1513247186.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:26.733Z,1513247186.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:27.079Z,1513247187.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:27.099Z,1513247187.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:27.478Z,1513247187.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:27.516Z,1513247187.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:27.915Z,1513247187.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:27.934Z,1513247187.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x50832 got:0x409
2017-12-14T10:26:27.999Z,1513247187.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:28.289Z,1513247188.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:28.320Z,1513247188.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:28.771Z,1513247188.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:28.838Z,1513247188.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:29.094Z,1513247189.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:29.126Z,1513247189.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:29.495Z,1513247189.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:29.559Z,1513247189.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:29.880Z,1513247189.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:29.915Z,1513247189.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:30.278Z,1513247190.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:30.322Z,1513247190.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:30.749Z,1513247190.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:30.776Z,1513247190.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:31.096Z,1513247191.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:31.139Z,1513247191.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:31.526Z,1513247191.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:31.587Z,1513247191.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:31.887Z,1513247191.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:31.956Z,1513247191.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:32.284Z,1513247192.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:32.334Z,1513247192.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:32.689Z,1513247192.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:32.728Z,1513247192.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:33.087Z,1513247193.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:33.138Z,1513247193.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:33.486Z,1513247193.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:33.561Z,1513247193.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:33.901Z,1513247193.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:33.920Z,1513247193.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:34.296Z,1513247194.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:34.327Z,1513247194.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:34.689Z,1513247194.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:34.768Z,1513247194.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:35.079Z,1513247195.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:35.126Z,1513247195.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:35.473Z,1513247195.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:35.531Z,1513247195.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:35.883Z,1513247195.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:35.924Z,1513247195.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:36.304Z,1513247196.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:36.333Z,1513247196.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:36.695Z,1513247196.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:36.711Z,1513247196.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:37.100Z,1513247197.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:37.142Z,1513247197.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:37.523Z,1513247197.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:37.542Z,1513247197.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:37.886Z,1513247197.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:37.912Z,1513247197.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:38.286Z,1513247198.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:38.310Z,1513247198.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:38.708Z,1513247198.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:38.735Z,1513247198.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:39.093Z,1513247199.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:39.148Z,1513247199.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:39.485Z,1513247199.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:39.529Z,1513247199.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:39.903Z,1513247199.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:39.936Z,1513247199.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:40.293Z,1513247200.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:40.339Z,1513247200.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:40.695Z,1513247200.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:40.731Z,1513247200.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:41.107Z,1513247201.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:41.138Z,1513247201.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:41.487Z,1513247201.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:41.510Z,1513247201.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:41.885Z,1513247201.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:41.916Z,1513247201.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:42.276Z,1513247202.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:42.315Z,1513247202.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:42.728Z,1513247202.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:42.796Z,1513247202.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:43.090Z,1513247203.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:43.120Z,1513247203.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:43.499Z,1513247203.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:43.548Z,1513247203.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:43.883Z,1513247203.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:43.936Z,1513247203.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:44.282Z,1513247204.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:44.313Z,1513247204.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:44.734Z,1513247204.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:44.770Z,1513247204.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:45.080Z,1513247205.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:45.103Z,1513247205.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:45.488Z,1513247205.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:45.508Z,1513247205.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:45.894Z,1513247205.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:45.917Z,1513247205.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:46.301Z,1513247206.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:46.404Z,1513247206.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:46.706Z,1513247206.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:46.760Z,1513247206.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:46.760Z,1513247206.760 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198
2017-12-14T10:26:46.760Z,1513247206.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:26:46.766Z,1513247206.766 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:46.766Z,1513247206.766 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 198
2017-12-14T10:26:46.766Z,1513247206.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:26:46.768Z,1513247206.768 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:46.768Z,1513247206.768 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198
2017-12-14T10:26:46.768Z,1513247206.768 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:26:46.792Z,1513247206.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:26:46.801Z,1513247206.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:26:46.801Z,1513247206.801 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:26:47.071Z,1513247207.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:47.117Z,1513247207.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:26:47.117Z,1513247207.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198
2017-12-14T10:26:47.117Z,1513247207.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:26:47.118Z,1513247207.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 198
2017-12-14T10:26:47.118Z,1513247207.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:26:47.118Z,1513247207.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198
2017-12-14T10:26:47.476Z,1513247207.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:47.546Z,1513247207.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:26:47.546Z,1513247207.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:26:47.547Z,1513247207.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:26:47.547Z,1513247207.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:26:47.547Z,1513247207.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:26:47.548Z,1513247207.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:26:47.548Z,1513247207.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:26:47.548Z,1513247207.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:26:47.549Z,1513247207.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:26:47.879Z,1513247207.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:47.895Z,1513247207.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:48.281Z,1513247208.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:48.389Z,1513247208.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:48.696Z,1513247208.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:48.710Z,1513247208.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:49.092Z,1513247209.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:49.139Z,1513247209.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:49.488Z,1513247209.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:49.504Z,1513247209.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:49.885Z,1513247209.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:49.904Z,1513247209.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:50.265Z,1513247210.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:50.305Z,1513247210.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:50.675Z,1513247210.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:50.735Z,1513247210.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:51.083Z,1513247211.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:51.097Z,1513247211.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:51.471Z,1513247211.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:51.520Z,1513247211.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:51.891Z,1513247211.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:51.923Z,1513247211.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:52.290Z,1513247212.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:52.304Z,1513247212.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:52.688Z,1513247212.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:52.711Z,1513247212.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:53.074Z,1513247213.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:53.107Z,1513247213.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:53.493Z,1513247213.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:53.507Z,1513247213.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:53.905Z,1513247213.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:53.942Z,1513247213.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:54.277Z,1513247214.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:54.302Z,1513247214.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:54.694Z,1513247214.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:54.717Z,1513247214.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:55.090Z,1513247215.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:55.117Z,1513247215.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:55.490Z,1513247215.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:55.519Z,1513247215.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:55.877Z,1513247215.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:55.891Z,1513247215.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:56.271Z,1513247216.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:56.314Z,1513247216.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:56.688Z,1513247216.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:56.872Z,1513247216.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:57.108Z,1513247217.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:57.128Z,1513247217.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:57.475Z,1513247217.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:57.527Z,1513247217.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:57.901Z,1513247217.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:57.916Z,1513247217.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:58.300Z,1513247218.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:58.319Z,1513247218.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:58.718Z,1513247218.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:58.799Z,1513247218.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:59.084Z,1513247219.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:59.100Z,1513247219.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:59.481Z,1513247219.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:59.502Z,1513247219.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:26:59.883Z,1513247219.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:26:59.903Z,1513247219.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:03.441Z,1513247223.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:03.484Z,1513247223.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:03.600Z,1513247223.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:03.679Z,1513247223.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:03.968Z,1513247223.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:03.984Z,1513247223.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:04.412Z,1513247224.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:04.460Z,1513247224.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:04.740Z,1513247224.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:04.755Z,1513247224.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:05.148Z,1513247225.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:05.163Z,1513247225.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:05.542Z,1513247225.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:05.557Z,1513247225.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:05.948Z,1513247225.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:05.964Z,1513247225.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:06.368Z,1513247226.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:06.442Z,1513247226.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:06.741Z,1513247226.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:06.768Z,1513247226.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:07.139Z,1513247227.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:07.166Z,1513247227.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:07.540Z,1513247227.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:07.580Z,1513247227.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:07.936Z,1513247227.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:07.951Z,1513247227.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:08.342Z,1513247228.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:08.357Z,1513247228.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:08.758Z,1513247228.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:08.788Z,1513247228.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:09.146Z,1513247229.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:09.207Z,1513247229.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:09.550Z,1513247229.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:09.614Z,1513247229.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:09.997Z,1513247229.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:10.050Z,1513247230.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:10.330Z,1513247230.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:10.384Z,1513247230.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:10.775Z,1513247230.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:10.860Z,1513247230.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:11.135Z,1513247231.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:11.202Z,1513247231.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:11.550Z,1513247231.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:11.570Z,1513247231.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:11.948Z,1513247231.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:11.975Z,1513247231.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:12.346Z,1513247232.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:12.376Z,1513247232.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:12.794Z,1513247232.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:12.816Z,1513247232.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:13.134Z,1513247233.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:13.188Z,1513247233.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:13.541Z,1513247233.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:13.569Z,1513247233.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:13.957Z,1513247233.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:13.971Z,1513247233.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:14.406Z,1513247234.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:14.455Z,1513247234.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:14.746Z,1513247234.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:14.761Z,1513247234.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:15.142Z,1513247235.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:15.160Z,1513247235.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:15.550Z,1513247235.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:15.564Z,1513247235.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:15.951Z,1513247235.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:15.966Z,1513247235.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:16.372Z,1513247236.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:16.448Z,1513247236.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:16.731Z,1513247236.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:16.759Z,1513247236.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:17.131Z,1513247237.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:17.160Z,1513247237.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:17.531Z,1513247237.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:17.565Z,1513247237.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:17.938Z,1513247237.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:17.972Z,1513247237.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:18.375Z,1513247238.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:18.431Z,1513247238.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:18.746Z,1513247238.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:18.783Z,1513247238.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:19.136Z,1513247239.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:19.151Z,1513247239.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:19.538Z,1513247239.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:19.623Z,1513247239.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:19.973Z,1513247239.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:19.989Z,1513247239.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:20.356Z,1513247240.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:20.434Z,1513247240.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:20.749Z,1513247240.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:20.833Z,1513247240.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:21.151Z,1513247241.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:21.178Z,1513247241.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:21.555Z,1513247241.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:21.578Z,1513247241.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:21.940Z,1513247241.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:21.968Z,1513247241.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:22.340Z,1513247242.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:22.355Z,1513247242.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:22.731Z,1513247242.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:22.806Z,1513247242.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:23.152Z,1513247243.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:23.167Z,1513247243.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:23.535Z,1513247243.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:23.564Z,1513247243.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:23.941Z,1513247243.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:23.977Z,1513247243.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:23.998Z,1513247243.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:24.351Z,1513247244.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:24.422Z,1513247244.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:24.779Z,1513247244.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:24.794Z,1513247244.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:24.823Z,1513247244.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:25.135Z,1513247245.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:25.167Z,1513247245.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:25.197Z,1513247245.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:25.552Z,1513247245.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:25.566Z,1513247245.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:25.967Z,1513247245.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:25.993Z,1513247245.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:26.007Z,1513247246.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:26.331Z,1513247246.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:26.357Z,1513247246.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:26.779Z,1513247246.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:26.790Z,1513247246.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:26.815Z,1513247246.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:27.155Z,1513247247.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:27.175Z,1513247247.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:27.217Z,1513247247.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:27.554Z,1513247247.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:27.569Z,1513247247.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:27.935Z,1513247247.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:27.968Z,1513247247.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:28.013Z,1513247248.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:28.335Z,1513247248.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:28.439Z,1513247248.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:28.741Z,1513247248.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:28.757Z,1513247248.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:28.809Z,1513247248.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:29.152Z,1513247249.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:29.187Z,1513247249.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:29.213Z,1513247249.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:29.554Z,1513247249.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:29.569Z,1513247249.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:29.965Z,1513247249.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:29.980Z,1513247249.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:30.009Z,1513247250.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:30.404Z,1513247250.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:30.431Z,1513247250.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:30.737Z,1513247250.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:30.776Z,1513247250.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:30.806Z,1513247250.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:31.130Z,1513247251.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:31.162Z,1513247251.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:31.209Z,1513247251.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:31.549Z,1513247251.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:31.622Z,1513247251.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:31.961Z,1513247251.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:32.005Z,1513247252.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:32.031Z,1513247252.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:32.372Z,1513247252.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:32.443Z,1513247252.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:32.746Z,1513247252.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:32.794Z,1513247252.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:32.801Z,1513247252.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:33.136Z,1513247253.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:33.163Z,1513247253.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:33.205Z,1513247253.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:33.546Z,1513247253.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:33.595Z,1513247253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:33.946Z,1513247253.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:33.967Z,1513247253.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:34.001Z,1513247254.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:34.392Z,1513247254.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:34.446Z,1513247254.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:34.728Z,1513247254.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:34.755Z,1513247254.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:34.797Z,1513247254.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:35.142Z,1513247255.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:35.163Z,1513247255.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:35.201Z,1513247255.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:35.536Z,1513247255.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:35.568Z,1513247255.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:35.942Z,1513247255.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:35.957Z,1513247255.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:35.997Z,1513247255.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:36.346Z,1513247256.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:36.360Z,1513247256.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:36.746Z,1513247256.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:36.777Z,1513247256.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:36.793Z,1513247256.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:37.132Z,1513247257.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:37.168Z,1513247257.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:37.197Z,1513247257.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:37.538Z,1513247257.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:37.559Z,1513247257.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:37.944Z,1513247257.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:37.960Z,1513247257.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:37.993Z,1513247257.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:38.337Z,1513247258.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:38.361Z,1513247258.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:38.790Z,1513247258.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:38.806Z,1513247258.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:38.857Z,1513247258.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:39.168Z,1513247259.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:39.187Z,1513247259.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:39.193Z,1513247259.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:39.556Z,1513247259.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:39.572Z,1513247259.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:39.930Z,1513247259.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:39.965Z,1513247259.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:39.989Z,1513247259.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:40.335Z,1513247260.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:40.369Z,1513247260.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:40.762Z,1513247260.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:40.786Z,1513247260.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:40.801Z,1513247260.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:41.141Z,1513247261.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:41.156Z,1513247261.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:41.189Z,1513247261.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:41.550Z,1513247261.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:41.564Z,1513247261.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:41.938Z,1513247261.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:41.986Z,1513247261.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:42.030Z,1513247262.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:42.364Z,1513247262.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:42.453Z,1513247262.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:42.742Z,1513247262.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:42.759Z,1513247262.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:42.781Z,1513247262.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.140Z,1513247263.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.156Z,1513247263.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:43.185Z,1513247263.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.546Z,1513247263.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.561Z,1513247263.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:43.954Z,1513247263.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.981Z,1513247263.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:43.989Z,1513247263.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:44.383Z,1513247264.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:44.437Z,1513247264.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:44.738Z,1513247264.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:44.754Z,1513247264.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:44.777Z,1513247264.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:45.174Z,1513247265.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:45.181Z,1513247265.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:45.203Z,1513247265.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:45.539Z,1513247265.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:45.560Z,1513247265.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:45.950Z,1513247265.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:45.966Z,1513247265.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:45.985Z,1513247265.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:46.381Z,1513247266.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:46.446Z,1513247266.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:46.742Z,1513247266.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:46.775Z,1513247266.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:46.781Z,1513247266.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:47.139Z,1513247267.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:47.176Z,1513247267.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:47.185Z,1513247267.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:47.535Z,1513247267.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:47.551Z,1513247267.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:47.983Z,1513247267.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:47.986Z,1513247267.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:48.079Z,1513247268.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:48.393Z,1513247268.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:48.486Z,1513247268.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:48.758Z,1513247268.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:48.772Z,1513247268.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:48.777Z,1513247268.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:49.155Z,1513247269.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:49.174Z,1513247269.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:49.181Z,1513247269.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:49.555Z,1513247269.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:49.569Z,1513247269.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:49.938Z,1513247269.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:49.965Z,1513247269.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:49.977Z,1513247269.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:50.334Z,1513247270.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:50.351Z,1513247270.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:50.734Z,1513247270.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:50.763Z,1513247270.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:50.773Z,1513247270.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:51.143Z,1513247271.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:51.159Z,1513247271.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:51.177Z,1513247271.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:51.544Z,1513247271.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:51.560Z,1513247271.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:51.951Z,1513247271.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:51.965Z,1513247271.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:51.973Z,1513247271.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:52.354Z,1513247272.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:52.371Z,1513247272.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:52.768Z,1513247272.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:52.770Z,1513247272.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:52.814Z,1513247272.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:53.144Z,1513247273.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:53.160Z,1513247273.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:53.173Z,1513247273.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:53.532Z,1513247273.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:53.564Z,1513247273.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:53.932Z,1513247273.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:53.969Z,1513247273.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:54.018Z,1513247274.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:54.330Z,1513247274.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:54.366Z,1513247274.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:54.766Z,1513247274.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:54.824Z,1513247274.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:54.888Z,1513247274.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:55.164Z,1513247275.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:55.169Z,1513247275.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:55.179Z,1513247275.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:55.549Z,1513247275.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:55.612Z,1513247275.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:55.935Z,1513247275.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:55.950Z,1513247275.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:55.965Z,1513247275.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:56.354Z,1513247276.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:56.415Z,1513247276.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:56.738Z,1513247276.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:56.759Z,1513247276.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:56.762Z,1513247276.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.141Z,1513247277.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.156Z,1513247277.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:57.165Z,1513247277.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.544Z,1513247277.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.563Z,1513247277.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:57.949Z,1513247277.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.961Z,1513247277.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:57.965Z,1513247277.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:58.378Z,1513247278.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:58.430Z,1513247278.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:58.756Z,1513247278.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:58.757Z,1513247278.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:58.774Z,1513247278.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:59.130Z,1513247279.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:59.161Z,1513247279.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:59.175Z,1513247279.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:59.538Z,1513247279.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:59.553Z,1513247279.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:27:59.939Z,1513247279.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:59.969Z,1513247279.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:27:59.979Z,1513247279.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:00.765Z,1513247280.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:01.169Z,1513247281.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:01.965Z,1513247281.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:02.761Z,1513247282.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:03.165Z,1513247283.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:03.425Z,1513247283.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:03.447Z,1513247283.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:03.559Z,1513247283.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:03.590Z,1513247283.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:03.954Z,1513247283.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:03.961Z,1513247283.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:04.004Z,1513247284.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:04.406Z,1513247284.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:04.491Z,1513247284.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:04.743Z,1513247284.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:04.758Z,1513247284.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:04.787Z,1513247284.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:05.140Z,1513247285.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:05.156Z,1513247285.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:05.161Z,1513247285.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:05.546Z,1513247285.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:05.561Z,1513247285.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:05.954Z,1513247285.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:05.957Z,1513247285.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:05.990Z,1513247285.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:06.341Z,1513247286.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:06.363Z,1513247286.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:06.754Z,1513247286.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:06.773Z,1513247286.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:06.818Z,1513247286.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:07.135Z,1513247287.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:07.157Z,1513247287.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:07.161Z,1513247287.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:07.551Z,1513247287.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:07.565Z,1513247287.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:07.953Z,1513247287.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:07.959Z,1513247287.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:07.974Z,1513247287.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:08.356Z,1513247288.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:08.375Z,1513247288.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:08.750Z,1513247288.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:08.779Z,1513247288.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:08.814Z,1513247288.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:09.134Z,1513247289.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:09.153Z,1513247289.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:09.172Z,1513247289.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:09.555Z,1513247289.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:09.570Z,1513247289.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:09.949Z,1513247289.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:09.991Z,1513247289.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:10.013Z,1513247290.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:10.360Z,1513247290.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:10.432Z,1513247290.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:10.747Z,1513247290.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:10.760Z,1513247290.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:10.796Z,1513247290.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:11.138Z,1513247291.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:11.153Z,1513247291.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:11.160Z,1513247291.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:11.540Z,1513247291.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:11.555Z,1513247291.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:11.950Z,1513247291.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:11.955Z,1513247291.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:11.986Z,1513247291.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:12.387Z,1513247292.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:12.441Z,1513247292.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:12.747Z,1513247292.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:12.749Z,1513247292.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:12.764Z,1513247292.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:13.140Z,1513247293.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:13.149Z,1513247293.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:13.156Z,1513247293.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:13.534Z,1513247293.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:13.556Z,1513247293.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:13.946Z,1513247293.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:13.947Z,1513247293.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:13.975Z,1513247293.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:14.338Z,1513247294.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:14.427Z,1513247294.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:14.741Z,1513247294.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:14.772Z,1513247294.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:14.787Z,1513247294.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:15.150Z,1513247295.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:15.154Z,1513247295.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:15.183Z,1513247295.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:15.547Z,1513247295.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:15.578Z,1513247295.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:15.947Z,1513247295.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:15.949Z,1513247295.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:16.007Z,1513247296.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:16.395Z,1513247296.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:16.471Z,1513247296.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:16.742Z,1513247296.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:16.746Z,1513247296.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:16.760Z,1513247296.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:17.147Z,1513247297.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:17.167Z,1513247297.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:17.247Z,1513247297.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:17.538Z,1513247297.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:17.567Z,1513247297.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:17.942Z,1513247297.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:17.957Z,1513247297.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:18.011Z,1513247298.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:18.356Z,1513247298.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:18.379Z,1513247298.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:18.737Z,1513247298.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:18.743Z,1513247298.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:18.780Z,1513247298.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:19.133Z,1513247299.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:19.141Z,1513247299.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:19.166Z,1513247299.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:19.535Z,1513247299.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:19.551Z,1513247299.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:19.938Z,1513247299.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:19.940Z,1513247299.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:19.955Z,1513247299.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:20.349Z,1513247300.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:20.390Z,1513247300.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:20.735Z,1513247300.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:20.780Z,1513247300.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:20.832Z,1513247300.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:21.146Z,1513247301.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:21.157Z,1513247301.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:21.162Z,1513247301.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:21.544Z,1513247301.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:21.586Z,1513247301.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:21.941Z,1513247301.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:21.953Z,1513247301.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:21.957Z,1513247301.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:22.339Z,1513247302.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:22.365Z,1513247302.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:22.750Z,1513247302.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:22.766Z,1513247302.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:22.805Z,1513247302.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:23.130Z,1513247303.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:23.153Z,1513247303.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:23.160Z,1513247303.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:23.589Z,1513247303.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:23.613Z,1513247303.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:23.949Z,1513247303.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:23.957Z,1513247303.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:23.979Z,1513247303.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:24.386Z,1513247304.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:24.436Z,1513247304.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:24.732Z,1513247304.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:24.746Z,1513247304.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:24.760Z,1513247304.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:25.141Z,1513247305.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:25.149Z,1513247305.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:25.164Z,1513247305.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:25.538Z,1513247305.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:25.556Z,1513247305.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:25.946Z,1513247305.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:25.946Z,1513247305.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:26.045Z,1513247306.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:26.365Z,1513247306.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:26.433Z,1513247306.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:26.742Z,1513247306.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:26.780Z,1513247306.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:26.843Z,1513247306.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:27.146Z,1513247307.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:27.151Z,1513247307.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:27.165Z,1513247307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:27.531Z,1513247307.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:27.567Z,1513247307.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:27.935Z,1513247307.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:27.946Z,1513247307.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:27.966Z,1513247307.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:28.356Z,1513247308.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:28.438Z,1513247308.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:28.741Z,1513247308.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:28.768Z,1513247308.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:28.783Z,1513247308.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:29.148Z,1513247309.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:29.151Z,1513247309.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:29.175Z,1513247309.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:29.549Z,1513247309.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:29.575Z,1513247309.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:29.942Z,1513247309.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:29.962Z,1513247309.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:30.001Z,1513247310.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:30.379Z,1513247310.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:30.435Z,1513247310.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:30.731Z,1513247310.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:30.737Z,1513247310.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:30.757Z,1513247310.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:31.141Z,1513247311.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:31.143Z,1513247311.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:31.163Z,1513247311.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:31.544Z,1513247311.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:31.559Z,1513247311.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:31.937Z,1513247311.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:31.958Z,1513247311.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:31.997Z,1513247311.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:32.346Z,1513247312.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:32.367Z,1513247312.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:32.733Z,1513247312.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:32.749Z,1513247312.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:32.789Z,1513247312.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:33.142Z,1513247313.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:33.177Z,1513247313.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:33.226Z,1513247313.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:33.537Z,1513247313.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:33.568Z,1513247313.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:33.935Z,1513247313.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:33.937Z,1513247313.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:33.952Z,1513247313.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:34.339Z,1513247314.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:34.355Z,1513247314.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:34.735Z,1513247314.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:34.792Z,1513247314.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:34.819Z,1513247314.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:35.141Z,1513247315.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:35.155Z,1513247315.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:35.187Z,1513247315.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:35.541Z,1513247315.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:35.557Z,1513247315.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:35.937Z,1513247315.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:35.938Z,1513247315.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:35.969Z,1513247315.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:36.375Z,1513247316.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:36.407Z,1513247316.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:36.734Z,1513247316.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:36.767Z,1513247316.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:36.810Z,1513247316.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:37.134Z,1513247317.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:37.158Z,1513247317.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:37.162Z,1513247317.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:37.554Z,1513247317.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:37.579Z,1513247317.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:37.954Z,1513247317.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:37.955Z,1513247317.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:37.999Z,1513247317.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:38.382Z,1513247318.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:38.442Z,1513247318.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:38.738Z,1513247318.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:38.750Z,1513247318.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:38.779Z,1513247318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:39.146Z,1513247319.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:39.153Z,1513247319.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:39.161Z,1513247319.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:39.551Z,1513247319.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:39.570Z,1513247319.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:39.950Z,1513247319.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:39.960Z,1513247319.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:39.975Z,1513247319.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:40.406Z,1513247320.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:40.429Z,1513247320.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:40.741Z,1513247320.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:40.746Z,1513247320.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:40.790Z,1513247320.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:41.138Z,1513247321.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:41.147Z,1513247321.147 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:28:41.147Z,1513247321.147 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:28:41.147Z,1513247321.147 [BPC1](ERROR): Communications Fault
2017-12-14T10:28:41.149Z,1513247321.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:41.180Z,1513247321.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:41.212Z,1513247321.212 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:28:41.532Z,1513247321.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:41.547Z,1513247321.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:41.936Z,1513247321.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:41.946Z,1513247321.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:41.952Z,1513247321.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:42.353Z,1513247322.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:42.424Z,1513247322.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:42.454Z,1513247322.454 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:28:42.454Z,1513247322.454 [BPC1] No Fault, FailCount= 1
2017-12-14T10:28:42.742Z,1513247322.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:42.804Z,1513247322.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:42.903Z,1513247322.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:43.146Z,1513247323.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:43.151Z,1513247323.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:43.166Z,1513247323.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:43.550Z,1513247323.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:43.564Z,1513247323.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:43.942Z,1513247323.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:43.947Z,1513247323.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:43.961Z,1513247323.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:44.324Z,1513247324.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:44.417Z,1513247324.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:44.735Z,1513247324.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:44.738Z,1513247324.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:44.774Z,1513247324.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:45.134Z,1513247325.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:45.141Z,1513247325.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:45.150Z,1513247325.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:45.537Z,1513247325.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:45.569Z,1513247325.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:45.937Z,1513247325.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:45.951Z,1513247325.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:45.999Z,1513247325.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:46.342Z,1513247326.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:46.357Z,1513247326.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:46.728Z,1513247326.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:46.734Z,1513247326.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:46.763Z,1513247326.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:47.135Z,1513247327.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:47.137Z,1513247327.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:47.164Z,1513247327.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:47.531Z,1513247327.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:47.567Z,1513247327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:47.934Z,1513247327.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:47.940Z,1513247327.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:47.977Z,1513247327.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:48.354Z,1513247328.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:48.374Z,1513247328.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:48.731Z,1513247328.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:48.787Z,1513247328.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:48.815Z,1513247328.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:49.141Z,1513247329.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:49.143Z,1513247329.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:49.193Z,1513247329.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:49.537Z,1513247329.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:49.552Z,1513247329.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:49.938Z,1513247329.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:49.939Z,1513247329.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:49.953Z,1513247329.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:50.337Z,1513247330.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:50.352Z,1513247330.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:50.734Z,1513247330.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:50.771Z,1513247330.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:50.807Z,1513247330.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:51.138Z,1513247331.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:51.159Z,1513247331.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:51.204Z,1513247331.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:51.554Z,1513247331.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:51.569Z,1513247331.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:51.931Z,1513247331.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:51.933Z,1513247331.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:51.972Z,1513247331.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:52.410Z,1513247332.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:52.452Z,1513247332.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:52.730Z,1513247332.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:52.740Z,1513247332.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:52.763Z,1513247332.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:53.137Z,1513247333.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:53.154Z,1513247333.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:53.168Z,1513247333.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:53.544Z,1513247333.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:53.560Z,1513247333.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:53.933Z,1513247333.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:53.946Z,1513247333.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:53.983Z,1513247333.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:54.387Z,1513247334.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:54.431Z,1513247334.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:54.730Z,1513247334.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:54.750Z,1513247334.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:54.780Z,1513247334.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:55.134Z,1513247335.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:55.139Z,1513247335.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:55.154Z,1513247335.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:55.540Z,1513247335.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:55.556Z,1513247335.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:55.929Z,1513247335.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:55.940Z,1513247335.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:55.956Z,1513247335.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:56.344Z,1513247336.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:56.424Z,1513247336.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:56.725Z,1513247336.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:56.761Z,1513247336.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:56.776Z,1513247336.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:57.129Z,1513247337.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:57.157Z,1513247337.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:57.172Z,1513247337.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:57.559Z,1513247337.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:57.574Z,1513247337.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:57.925Z,1513247337.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:57.946Z,1513247337.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:57.967Z,1513247337.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:58.344Z,1513247338.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:58.434Z,1513247338.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:58.722Z,1513247338.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:58.778Z,1513247338.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:58.818Z,1513247338.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:59.125Z,1513247339.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:59.142Z,1513247339.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:59.170Z,1513247339.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:59.550Z,1513247339.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:59.582Z,1513247339.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:28:59.585Z,1513247339.585 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T10:28:59.586Z,1513247339.586 [Default:CheckIn:C.Wait] Stopped
2017-12-14T10:28:59.586Z,1513247339.586 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T10:28:59.586Z,1513247339.586 [Default:CheckIn:D] Running Loop=1
2017-12-14T10:28:59.921Z,1513247339.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:28:59.987Z,1513247339.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:00.030Z,1513247340.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:00.033Z,1513247340.033 [Default:CheckIn:D] Stopped
2017-12-14T10:29:00.033Z,1513247340.033 [Default:CheckIn:E] Running Loop=1
2017-12-14T10:29:00.717Z,1513247340.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:01.121Z,1513247341.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:01.917Z,1513247341.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:02.715Z,1513247342.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:03.133Z,1513247343.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:03.489Z,1513247343.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:03.556Z,1513247343.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:03.573Z,1513247343.573 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 595.744076 min 
2017-12-14T10:29:03.573Z,1513247343.573 [Default:CheckIn:E] Stopped
2017-12-14T10:29:03.573Z,1513247343.573 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T10:29:03.573Z,1513247343.573 [Default:CheckIn] Stopped
2017-12-14T10:29:03.573Z,1513247343.573 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T10:29:03.574Z,1513247343.574 [Default:CheckIn](INFO): Running loop #58
2017-12-14T10:29:03.574Z,1513247343.574 [Default:CheckIn] Running Loop=58
2017-12-14T10:29:03.574Z,1513247343.574 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T10:29:03.574Z,1513247343.574 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T10:29:03.672Z,1513247343.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:03.706Z,1513247343.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:03.929Z,1513247343.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:04.040Z,1513247344.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:04.055Z,1513247344.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:04.444Z,1513247344.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:04.488Z,1513247344.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:04.726Z,1513247344.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:04.842Z,1513247344.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:04.856Z,1513247344.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:05.134Z,1513247345.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:05.239Z,1513247345.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:05.302Z,1513247345.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:05.646Z,1513247345.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:05.660Z,1513247345.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:05.929Z,1513247345.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:06.044Z,1513247346.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:06.064Z,1513247346.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:06.438Z,1513247346.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:06.470Z,1513247346.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:06.725Z,1513247346.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:06.827Z,1513247346.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:06.915Z,1513247346.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:07.132Z,1513247347.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:07.239Z,1513247347.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:07.259Z,1513247347.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:07.627Z,1513247347.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:07.663Z,1513247347.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:07.925Z,1513247347.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:08.042Z,1513247348.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:08.056Z,1513247348.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:08.438Z,1513247348.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:08.489Z,1513247348.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:08.721Z,1513247348.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:08.844Z,1513247348.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:08.862Z,1513247348.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:09.125Z,1513247349.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:09.249Z,1513247349.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:09.264Z,1513247349.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:09.647Z,1513247349.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:09.662Z,1513247349.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:09.921Z,1513247349.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:10.027Z,1513247350.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:10.059Z,1513247350.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:10.428Z,1513247350.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:10.476Z,1513247350.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:10.717Z,1513247350.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:10.836Z,1513247350.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:10.862Z,1513247350.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:11.121Z,1513247351.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:11.227Z,1513247351.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:11.259Z,1513247351.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:11.649Z,1513247351.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:11.679Z,1513247351.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:11.918Z,1513247351.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:12.052Z,1513247352.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:12.066Z,1513247352.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:12.451Z,1513247352.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:12.468Z,1513247352.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:12.713Z,1513247352.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:12.827Z,1513247352.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:12.854Z,1513247352.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:13.117Z,1513247353.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:13.231Z,1513247353.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:13.263Z,1513247353.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:13.277Z,1513247353.277 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:29:13.627Z,1513247353.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:13.682Z,1513247353.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:13.913Z,1513247353.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:14.028Z,1513247354.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:14.064Z,1513247354.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:14.473Z,1513247354.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:14.515Z,1513247354.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:14.709Z,1513247354.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:14.839Z,1513247354.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:14.876Z,1513247354.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:15.113Z,1513247355.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:15.240Z,1513247355.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:15.266Z,1513247355.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:15.638Z,1513247355.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:15.667Z,1513247355.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:15.909Z,1513247355.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:16.027Z,1513247356.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:16.062Z,1513247356.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:16.427Z,1513247356.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:16.465Z,1513247356.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:16.707Z,1513247356.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:16.833Z,1513247356.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:16.876Z,1513247356.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:17.121Z,1513247357.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:17.232Z,1513247357.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:17.290Z,1513247357.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:17.637Z,1513247357.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:17.664Z,1513247357.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:17.917Z,1513247357.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:18.068Z,1513247358.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:18.107Z,1513247358.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:18.449Z,1513247358.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:18.472Z,1513247358.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:18.715Z,1513247358.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:18.836Z,1513247358.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:18.851Z,1513247358.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:19.129Z,1513247359.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:19.232Z,1513247359.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:19.247Z,1513247359.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:19.636Z,1513247359.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:19.651Z,1513247359.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:19.925Z,1513247359.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:20.032Z,1513247360.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:20.068Z,1513247360.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:20.437Z,1513247360.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:20.483Z,1513247360.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:20.721Z,1513247360.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:20.839Z,1513247360.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:20.859Z,1513247360.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:20.898Z,1513247360.898 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T10:29:20.898Z,1513247360.898 [DropWeight] No Fault, FailCount= 1
2017-12-14T10:29:21.125Z,1513247361.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:21.285Z,1513247361.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:21.330Z,1513247361.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:21.639Z,1513247361.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:21.659Z,1513247361.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:21.921Z,1513247361.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:22.033Z,1513247362.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:22.050Z,1513247362.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:22.437Z,1513247362.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:22.484Z,1513247362.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:22.717Z,1513247362.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:22.832Z,1513247362.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:22.856Z,1513247362.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:23.121Z,1513247363.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:23.236Z,1513247363.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:23.260Z,1513247363.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:23.645Z,1513247363.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:23.663Z,1513247363.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:23.920Z,1513247363.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:24.046Z,1513247364.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:24.062Z,1513247364.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:24.479Z,1513247364.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:24.548Z,1513247364.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:24.713Z,1513247364.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:24.830Z,1513247364.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:24.858Z,1513247364.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:25.117Z,1513247365.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:25.239Z,1513247365.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:25.254Z,1513247365.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:25.636Z,1513247365.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:25.672Z,1513247365.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:25.913Z,1513247365.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:26.028Z,1513247366.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:26.063Z,1513247366.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:26.437Z,1513247366.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:26.489Z,1513247366.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:26.709Z,1513247366.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:26.842Z,1513247366.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:26.870Z,1513247366.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:27.113Z,1513247367.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:27.254Z,1513247367.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:27.296Z,1513247367.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:27.650Z,1513247367.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:27.715Z,1513247367.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:27.909Z,1513247367.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:28.048Z,1513247368.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:28.067Z,1513247368.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:28.470Z,1513247368.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:28.520Z,1513247368.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:28.705Z,1513247368.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:28.828Z,1513247368.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:28.863Z,1513247368.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:29.109Z,1513247369.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:29.227Z,1513247369.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:29.259Z,1513247369.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:29.654Z,1513247369.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:29.668Z,1513247369.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:29.905Z,1513247369.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:30.037Z,1513247370.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:30.067Z,1513247370.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:30.438Z,1513247370.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:30.464Z,1513247370.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:30.703Z,1513247370.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:30.827Z,1513247370.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:30.883Z,1513247370.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:31.125Z,1513247371.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:31.234Z,1513247371.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:31.249Z,1513247371.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:31.635Z,1513247371.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:31.649Z,1513247371.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:31.921Z,1513247371.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:32.038Z,1513247372.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:32.052Z,1513247372.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:32.434Z,1513247372.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:32.449Z,1513247372.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:32.719Z,1513247372.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:32.839Z,1513247372.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:32.859Z,1513247372.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:33.137Z,1513247373.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:33.246Z,1513247373.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:33.267Z,1513247373.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:33.644Z,1513247373.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:33.664Z,1513247373.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:33.933Z,1513247373.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:34.079Z,1513247374.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:34.096Z,1513247374.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:34.438Z,1513247374.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:34.464Z,1513247374.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:34.730Z,1513247374.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:34.835Z,1513247374.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:34.855Z,1513247374.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:35.133Z,1513247375.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:35.232Z,1513247375.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:35.259Z,1513247375.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:35.650Z,1513247375.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:35.702Z,1513247375.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:35.929Z,1513247375.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:36.036Z,1513247376.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:36.063Z,1513247376.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:36.442Z,1513247376.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:36.468Z,1513247376.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:36.726Z,1513247376.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:36.827Z,1513247376.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:36.864Z,1513247376.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:37.129Z,1513247377.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:37.269Z,1513247377.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:37.303Z,1513247377.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:37.627Z,1513247377.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:37.659Z,1513247377.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:37.925Z,1513247377.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:38.031Z,1513247378.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:38.057Z,1513247378.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:38.429Z,1513247378.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:38.467Z,1513247378.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:38.721Z,1513247378.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:38.844Z,1513247378.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:38.863Z,1513247378.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:39.125Z,1513247379.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:39.255Z,1513247379.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:39.275Z,1513247379.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:39.646Z,1513247379.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:39.667Z,1513247379.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:39.921Z,1513247379.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:40.027Z,1513247380.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:40.059Z,1513247380.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:40.495Z,1513247380.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:40.550Z,1513247380.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:40.717Z,1513247380.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:40.832Z,1513247380.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:40.858Z,1513247380.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:41.121Z,1513247381.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:41.241Z,1513247381.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:41.267Z,1513247381.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:41.656Z,1513247381.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:41.670Z,1513247381.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:41.917Z,1513247381.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:42.042Z,1513247382.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:42.062Z,1513247382.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:42.506Z,1513247382.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:42.521Z,1513247382.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:42.713Z,1513247382.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:42.838Z,1513247382.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:42.861Z,1513247382.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:43.117Z,1513247383.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:43.234Z,1513247383.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:43.265Z,1513247383.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:43.657Z,1513247383.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:43.688Z,1513247383.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:43.913Z,1513247383.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:44.039Z,1513247384.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:44.054Z,1513247384.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:44.433Z,1513247384.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:44.449Z,1513247384.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:44.716Z,1513247384.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:44.850Z,1513247384.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:44.880Z,1513247384.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:45.129Z,1513247385.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:45.246Z,1513247385.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:45.260Z,1513247385.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:45.643Z,1513247385.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:45.663Z,1513247385.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:45.925Z,1513247385.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:46.040Z,1513247386.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:46.054Z,1513247386.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:46.434Z,1513247386.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:46.458Z,1513247386.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:46.727Z,1513247386.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:46.867Z,1513247386.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:46.970Z,1513247386.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:47.137Z,1513247387.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:47.239Z,1513247387.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:47.261Z,1513247387.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:47.650Z,1513247387.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:47.726Z,1513247387.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:47.726Z,1513247387.726 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199
2017-12-14T10:29:47.726Z,1513247387.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:29:47.728Z,1513247387.728 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:47.728Z,1513247387.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 199
2017-12-14T10:29:47.728Z,1513247387.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:29:47.735Z,1513247387.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:47.735Z,1513247387.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199
2017-12-14T10:29:47.735Z,1513247387.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:29:47.768Z,1513247387.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:29:47.768Z,1513247387.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:29:47.768Z,1513247387.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:29:47.935Z,1513247387.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:48.040Z,1513247388.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:48.074Z,1513247388.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:29:48.074Z,1513247388.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199
2017-12-14T10:29:48.074Z,1513247388.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:29:48.074Z,1513247388.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 199
2017-12-14T10:29:48.075Z,1513247388.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:29:48.075Z,1513247388.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199
2017-12-14T10:29:48.446Z,1513247388.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:48.482Z,1513247388.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:29:48.483Z,1513247388.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:29:48.483Z,1513247388.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:29:48.483Z,1513247388.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:29:48.484Z,1513247388.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:29:48.484Z,1513247388.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:29:48.484Z,1513247388.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:29:48.493Z,1513247388.493 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:29:48.493Z,1513247388.493 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:29:48.729Z,1513247388.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:48.828Z,1513247388.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:48.855Z,1513247388.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:49.133Z,1513247389.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:49.227Z,1513247389.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:49.282Z,1513247389.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:49.630Z,1513247389.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:49.670Z,1513247389.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:49.929Z,1513247389.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:50.032Z,1513247390.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:50.116Z,1513247390.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:50.426Z,1513247390.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:50.455Z,1513247390.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:50.725Z,1513247390.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:50.881Z,1513247390.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:50.931Z,1513247390.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:51.247Z,1513247391.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:51.261Z,1513247391.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:51.263Z,1513247391.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:51.645Z,1513247391.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:51.667Z,1513247391.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:52.033Z,1513247392.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:52.048Z,1513247392.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:52.057Z,1513247392.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:52.437Z,1513247392.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:52.460Z,1513247392.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:52.793Z,1513247392.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:52.835Z,1513247392.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:52.856Z,1513247392.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:53.237Z,1513247393.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:53.251Z,1513247393.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:53.589Z,1513247393.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:53.651Z,1513247393.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:53.670Z,1513247393.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:54.048Z,1513247394.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:54.064Z,1513247394.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:54.387Z,1513247394.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:54.446Z,1513247394.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:54.472Z,1513247394.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:54.797Z,1513247394.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:54.831Z,1513247394.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:54.862Z,1513247394.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:55.231Z,1513247395.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:55.267Z,1513247395.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:55.596Z,1513247395.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:55.628Z,1513247395.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:55.642Z,1513247395.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:56.037Z,1513247396.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:56.068Z,1513247396.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:56.391Z,1513247396.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:56.480Z,1513247396.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:56.519Z,1513247396.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:56.842Z,1513247396.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:56.857Z,1513247396.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:56.856Z,1513247396.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:57.243Z,1513247397.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:57.258Z,1513247397.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:57.642Z,1513247397.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:57.653Z,1513247397.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:57.706Z,1513247397.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:58.040Z,1513247398.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:58.054Z,1513247398.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:58.442Z,1513247398.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:58.450Z,1513247398.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:58.458Z,1513247398.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:58.836Z,1513247398.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:58.852Z,1513247398.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:59.113Z,1513247399.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:59.234Z,1513247399.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:59.250Z,1513247399.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:59.645Z,1513247399.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:29:59.661Z,1513247399.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:29:59.909Z,1513247399.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:00.046Z,1513247400.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:00.061Z,1513247400.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:00.707Z,1513247400.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:01.137Z,1513247401.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:01.933Z,1513247401.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:02.729Z,1513247402.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:03.133Z,1513247403.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:03.631Z,1513247403.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:03.646Z,1513247403.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:03.744Z,1513247403.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:03.790Z,1513247403.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:03.929Z,1513247403.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:04.104Z,1513247404.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:04.142Z,1513247404.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:04.507Z,1513247404.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:04.538Z,1513247404.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:04.728Z,1513247404.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:04.906Z,1513247404.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:04.921Z,1513247404.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:05.133Z,1513247405.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:05.306Z,1513247405.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:05.321Z,1513247405.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:05.705Z,1513247405.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:05.722Z,1513247405.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:05.932Z,1513247405.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:06.118Z,1513247406.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:06.150Z,1513247406.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:06.542Z,1513247406.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:06.563Z,1513247406.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:06.725Z,1513247406.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:06.898Z,1513247406.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:06.922Z,1513247406.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:07.129Z,1513247407.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:07.309Z,1513247407.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:07.324Z,1513247407.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:07.703Z,1513247407.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:07.721Z,1513247407.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:07.925Z,1513247407.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:08.104Z,1513247408.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:08.120Z,1513247408.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:08.503Z,1513247408.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:08.560Z,1513247408.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:08.721Z,1513247408.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:08.913Z,1513247408.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:08.928Z,1513247408.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:09.125Z,1513247409.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:09.318Z,1513247409.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:09.368Z,1513247409.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:09.718Z,1513247409.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:09.745Z,1513247409.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:09.921Z,1513247409.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:10.095Z,1513247410.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:10.123Z,1513247410.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:10.495Z,1513247410.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:10.543Z,1513247410.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:10.717Z,1513247410.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:10.896Z,1513247410.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:10.934Z,1513247410.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:11.121Z,1513247411.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:11.295Z,1513247411.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:11.339Z,1513247411.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:11.724Z,1513247411.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:11.738Z,1513247411.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:11.918Z,1513247411.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:12.123Z,1513247412.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:12.143Z,1513247412.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:12.515Z,1513247412.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:12.535Z,1513247412.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:12.715Z,1513247412.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:12.897Z,1513247412.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:12.929Z,1513247412.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:13.129Z,1513247413.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:13.295Z,1513247413.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:13.320Z,1513247413.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:13.721Z,1513247413.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:13.765Z,1513247413.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:13.925Z,1513247413.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:14.090Z,1513247414.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:14.124Z,1513247414.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:14.496Z,1513247414.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:14.527Z,1513247414.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:14.739Z,1513247414.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:14.915Z,1513247414.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:14.933Z,1513247414.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:15.146Z,1513247415.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:15.318Z,1513247415.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:15.333Z,1513247415.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:15.718Z,1513247415.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:15.740Z,1513247415.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:15.941Z,1513247415.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:16.109Z,1513247416.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:16.177Z,1513247416.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:16.495Z,1513247416.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:16.529Z,1513247416.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:16.737Z,1513247416.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:16.897Z,1513247416.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:16.924Z,1513247416.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:17.141Z,1513247417.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:17.299Z,1513247417.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:17.331Z,1513247417.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:17.719Z,1513247417.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:17.733Z,1513247417.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:17.937Z,1513247417.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:18.116Z,1513247418.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:18.140Z,1513247418.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:18.515Z,1513247418.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:18.535Z,1513247418.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:18.733Z,1513247418.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:18.919Z,1513247418.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:18.943Z,1513247418.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:19.137Z,1513247419.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:19.330Z,1513247419.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:19.395Z,1513247419.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:19.707Z,1513247419.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:19.735Z,1513247419.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:19.933Z,1513247419.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:20.100Z,1513247420.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:20.135Z,1513247420.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:20.500Z,1513247420.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:20.530Z,1513247420.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:20.729Z,1513247420.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:20.918Z,1513247420.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:20.947Z,1513247420.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:21.133Z,1513247421.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:21.313Z,1513247421.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:21.344Z,1513247421.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:21.715Z,1513247421.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:21.744Z,1513247421.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:21.929Z,1513247421.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:22.099Z,1513247422.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:22.135Z,1513247422.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:22.539Z,1513247422.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:22.575Z,1513247422.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:22.727Z,1513247422.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:22.906Z,1513247422.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:22.921Z,1513247422.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:23.133Z,1513247423.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:23.306Z,1513247423.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:23.320Z,1513247423.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:23.713Z,1513247423.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:23.728Z,1513247423.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:23.932Z,1513247423.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:24.114Z,1513247424.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:24.146Z,1513247424.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:24.514Z,1513247424.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:24.552Z,1513247424.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:24.732Z,1513247424.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:24.901Z,1513247424.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:24.916Z,1513247424.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:25.137Z,1513247425.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:25.306Z,1513247425.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:25.321Z,1513247425.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:25.737Z,1513247425.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:25.752Z,1513247425.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:25.933Z,1513247425.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:26.108Z,1513247426.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:26.122Z,1513247426.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:26.504Z,1513247426.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:26.523Z,1513247426.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:26.731Z,1513247426.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:26.909Z,1513247426.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:26.925Z,1513247426.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:27.137Z,1513247427.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:27.310Z,1513247427.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:27.327Z,1513247427.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:27.711Z,1513247427.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:27.726Z,1513247427.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:27.933Z,1513247427.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:28.110Z,1513247428.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:28.125Z,1513247428.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:28.509Z,1513247428.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:28.525Z,1513247428.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:28.731Z,1513247428.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:28.947Z,1513247428.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:28.974Z,1513247428.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:29.149Z,1513247429.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:29.303Z,1513247429.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:29.318Z,1513247429.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:29.717Z,1513247429.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:29.733Z,1513247429.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:29.946Z,1513247429.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:30.114Z,1513247430.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:30.174Z,1513247430.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:30.514Z,1513247430.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:30.529Z,1513247430.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:30.743Z,1513247430.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:30.915Z,1513247430.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:30.978Z,1513247430.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:31.149Z,1513247431.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:31.303Z,1513247431.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:31.324Z,1513247431.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:31.709Z,1513247431.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:31.725Z,1513247431.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:31.949Z,1513247431.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:32.125Z,1513247432.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:32.190Z,1513247432.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:32.516Z,1513247432.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:32.531Z,1513247432.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:32.746Z,1513247432.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:32.927Z,1513247432.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:32.983Z,1513247432.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:33.149Z,1513247433.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:33.320Z,1513247433.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:33.339Z,1513247433.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:33.718Z,1513247433.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:33.733Z,1513247433.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:33.946Z,1513247433.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:34.095Z,1513247434.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:34.132Z,1513247434.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:34.495Z,1513247434.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:34.532Z,1513247434.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:34.741Z,1513247434.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:34.896Z,1513247434.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:34.932Z,1513247434.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:35.146Z,1513247435.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:35.327Z,1513247435.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:35.355Z,1513247435.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:35.710Z,1513247435.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:35.724Z,1513247435.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:35.941Z,1513247435.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:36.109Z,1513247436.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:36.131Z,1513247436.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:36.508Z,1513247436.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:36.527Z,1513247436.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:36.740Z,1513247436.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:36.898Z,1513247436.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:36.935Z,1513247436.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:37.146Z,1513247437.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:37.308Z,1513247437.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:37.323Z,1513247437.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:37.696Z,1513247437.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:37.735Z,1513247437.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:37.941Z,1513247437.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:38.107Z,1513247438.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:38.122Z,1513247438.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:38.507Z,1513247438.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:38.527Z,1513247438.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:38.737Z,1513247438.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:38.909Z,1513247438.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:38.939Z,1513247438.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:39.141Z,1513247439.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:39.318Z,1513247439.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:39.333Z,1513247439.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:39.719Z,1513247439.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:39.734Z,1513247439.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:39.937Z,1513247439.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:40.103Z,1513247440.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:40.139Z,1513247440.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:40.500Z,1513247440.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:40.532Z,1513247440.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:40.735Z,1513247440.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:40.906Z,1513247440.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:40.934Z,1513247440.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:41.141Z,1513247441.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:41.303Z,1513247441.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:41.367Z,1513247441.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:41.718Z,1513247441.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:41.746Z,1513247441.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:41.937Z,1513247441.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:42.109Z,1513247442.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:42.124Z,1513247442.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:42.510Z,1513247442.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:42.525Z,1513247442.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:42.734Z,1513247442.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:42.904Z,1513247442.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:42.923Z,1513247442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:43.141Z,1513247443.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:43.303Z,1513247443.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:43.323Z,1513247443.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:43.704Z,1513247443.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:43.719Z,1513247443.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:43.940Z,1513247443.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:44.103Z,1513247444.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:44.118Z,1513247444.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:44.495Z,1513247444.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:44.523Z,1513247444.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:44.733Z,1513247444.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:44.959Z,1513247444.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:44.987Z,1513247444.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:45.137Z,1513247445.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:45.318Z,1513247445.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:45.339Z,1513247445.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:45.718Z,1513247445.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:45.739Z,1513247445.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:45.933Z,1513247445.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:46.095Z,1513247446.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:46.122Z,1513247446.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:46.495Z,1513247446.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:46.547Z,1513247446.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:46.729Z,1513247446.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:46.909Z,1513247446.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:46.969Z,1513247446.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:47.133Z,1513247447.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:47.332Z,1513247447.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:47.348Z,1513247447.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:47.719Z,1513247447.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:47.734Z,1513247447.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:47.929Z,1513247447.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:48.131Z,1513247448.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:48.172Z,1513247448.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:48.515Z,1513247448.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:48.530Z,1513247448.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:48.726Z,1513247448.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:48.895Z,1513247448.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:48.929Z,1513247448.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:49.129Z,1513247449.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:49.296Z,1513247449.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:49.331Z,1513247449.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:49.700Z,1513247449.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:49.731Z,1513247449.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:49.925Z,1513247449.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:50.096Z,1513247450.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:50.133Z,1513247450.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:50.495Z,1513247450.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:50.531Z,1513247450.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:50.721Z,1513247450.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:50.905Z,1513247450.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:50.939Z,1513247450.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:51.126Z,1513247451.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:51.323Z,1513247451.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:51.348Z,1513247451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:51.728Z,1513247451.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:51.743Z,1513247451.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:51.921Z,1513247451.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:52.104Z,1513247452.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:52.159Z,1513247452.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:52.497Z,1513247452.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:52.543Z,1513247452.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:52.720Z,1513247452.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:52.896Z,1513247452.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:52.915Z,1513247452.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:53.126Z,1513247453.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:53.301Z,1513247453.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:53.358Z,1513247453.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:53.717Z,1513247453.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:53.741Z,1513247453.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:53.923Z,1513247453.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:54.105Z,1513247454.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:54.163Z,1513247454.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:54.532Z,1513247454.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:54.559Z,1513247454.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:54.719Z,1513247454.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:54.904Z,1513247454.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:54.920Z,1513247454.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:55.146Z,1513247455.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:55.297Z,1513247455.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:55.311Z,1513247455.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:55.707Z,1513247455.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:55.743Z,1513247455.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:55.941Z,1513247455.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:56.106Z,1513247456.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:56.120Z,1513247456.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:56.501Z,1513247456.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:56.516Z,1513247456.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:56.738Z,1513247456.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:56.920Z,1513247456.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:56.948Z,1513247456.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:57.180Z,1513247457.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:57.314Z,1513247457.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:57.328Z,1513247457.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:57.718Z,1513247457.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:57.751Z,1513247457.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:57.973Z,1513247457.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:58.104Z,1513247458.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:58.123Z,1513247458.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:58.505Z,1513247458.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:58.519Z,1513247458.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:58.770Z,1513247458.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:58.914Z,1513247458.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:58.929Z,1513247458.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:59.173Z,1513247459.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:59.308Z,1513247459.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:59.327Z,1513247459.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:59.713Z,1513247459.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:30:59.729Z,1513247459.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:30:59.969Z,1513247459.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:00.113Z,1513247460.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:00.128Z,1513247460.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:00.766Z,1513247460.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:01.169Z,1513247461.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:01.965Z,1513247461.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:02.761Z,1513247462.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:03.557Z,1513247463.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:03.829Z,1513247463.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:03.880Z,1513247463.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:03.962Z,1513247463.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:03.978Z,1513247463.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:04.008Z,1513247464.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:04.399Z,1513247464.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:04.443Z,1513247464.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:04.755Z,1513247464.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:04.757Z,1513247464.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:04.800Z,1513247464.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:05.154Z,1513247465.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:05.161Z,1513247465.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:05.190Z,1513247465.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:05.567Z,1513247465.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:05.592Z,1513247465.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:05.957Z,1513247465.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:05.978Z,1513247465.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:06.003Z,1513247466.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:06.376Z,1513247466.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:06.452Z,1513247466.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:06.754Z,1513247466.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:06.760Z,1513247466.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:06.775Z,1513247466.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:07.158Z,1513247467.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:07.159Z,1513247467.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:07.177Z,1513247467.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:07.567Z,1513247467.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:07.582Z,1513247467.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:07.953Z,1513247467.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:07.997Z,1513247467.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:08.012Z,1513247468.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:08.366Z,1513247468.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:08.395Z,1513247468.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:08.750Z,1513247468.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:08.792Z,1513247468.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:08.816Z,1513247468.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:09.154Z,1513247469.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:09.159Z,1513247469.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:09.211Z,1513247469.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:09.569Z,1513247469.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:09.603Z,1513247469.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:09.949Z,1513247469.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:09.970Z,1513247469.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:10.005Z,1513247470.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:10.366Z,1513247470.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:10.390Z,1513247470.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:10.745Z,1513247470.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:10.772Z,1513247470.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:10.819Z,1513247470.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:11.150Z,1513247471.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:11.163Z,1513247471.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:11.178Z,1513247471.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:11.567Z,1513247471.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:11.587Z,1513247471.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:11.955Z,1513247471.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:11.972Z,1513247471.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:11.986Z,1513247471.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:12.431Z,1513247472.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:12.458Z,1513247472.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:12.750Z,1513247472.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:12.758Z,1513247472.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:12.799Z,1513247472.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:13.152Z,1513247473.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:13.153Z,1513247473.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:13.192Z,1513247473.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:13.556Z,1513247473.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:13.586Z,1513247473.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:13.950Z,1513247473.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:13.955Z,1513247473.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:14.004Z,1513247474.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:14.465Z,1513247474.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:14.619Z,1513247474.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:14.750Z,1513247474.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:14.777Z,1513247474.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:14.832Z,1513247474.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:15.157Z,1513247475.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:15.174Z,1513247475.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:15.215Z,1513247475.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:15.578Z,1513247475.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:15.611Z,1513247475.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:15.954Z,1513247475.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:15.960Z,1513247475.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:16.028Z,1513247476.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:16.430Z,1513247476.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:16.490Z,1513247476.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:16.751Z,1513247476.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:16.760Z,1513247476.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:16.822Z,1513247476.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:17.154Z,1513247477.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:17.158Z,1513247477.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:17.179Z,1513247477.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:17.564Z,1513247477.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:17.583Z,1513247477.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:17.949Z,1513247477.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:18.003Z,1513247478.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:18.066Z,1513247478.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:18.409Z,1513247478.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:18.460Z,1513247478.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:18.746Z,1513247478.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:18.769Z,1513247478.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:18.814Z,1513247478.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:19.149Z,1513247479.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:19.200Z,1513247479.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:19.246Z,1513247479.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:19.563Z,1513247479.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:19.583Z,1513247479.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:19.946Z,1513247479.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:19.970Z,1513247479.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:20.009Z,1513247480.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:20.371Z,1513247480.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:20.452Z,1513247480.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:20.742Z,1513247480.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:20.778Z,1513247480.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:20.803Z,1513247480.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:21.147Z,1513247481.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:21.154Z,1513247481.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:21.193Z,1513247481.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:21.575Z,1513247481.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:21.640Z,1513247481.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:21.941Z,1513247481.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:21.970Z,1513247481.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:22.002Z,1513247482.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:22.369Z,1513247482.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:22.401Z,1513247482.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:22.738Z,1513247482.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:22.799Z,1513247482.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:22.838Z,1513247482.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:23.174Z,1513247483.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:23.178Z,1513247483.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:23.219Z,1513247483.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:23.590Z,1513247483.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:23.620Z,1513247483.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:23.969Z,1513247483.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:23.996Z,1513247483.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:24.015Z,1513247484.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:24.365Z,1513247484.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:24.419Z,1513247484.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:24.766Z,1513247484.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:24.817Z,1513247484.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:24.879Z,1513247484.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:25.165Z,1513247485.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:25.181Z,1513247485.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:25.192Z,1513247485.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:25.567Z,1513247485.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:25.595Z,1513247485.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:25.985Z,1513247485.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:25.991Z,1513247485.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:26.051Z,1513247486.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:26.450Z,1513247486.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:26.494Z,1513247486.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:26.756Z,1513247486.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:26.781Z,1513247486.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:26.794Z,1513247486.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:27.163Z,1513247487.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:27.185Z,1513247487.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:27.188Z,1513247487.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:27.564Z,1513247487.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:27.607Z,1513247487.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:27.964Z,1513247487.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:27.980Z,1513247487.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:27.981Z,1513247487.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:28.426Z,1513247488.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:28.466Z,1513247488.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:28.774Z,1513247488.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:28.778Z,1513247488.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:28.852Z,1513247488.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:29.179Z,1513247489.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:29.181Z,1513247489.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:29.199Z,1513247489.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:29.587Z,1513247489.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:29.615Z,1513247489.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:29.961Z,1513247489.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:29.985Z,1513247489.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:30.018Z,1513247490.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:30.434Z,1513247490.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:30.543Z,1513247490.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:30.762Z,1513247490.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:30.782Z,1513247490.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:30.811Z,1513247490.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:31.166Z,1513247491.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:31.189Z,1513247491.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:31.244Z,1513247491.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:31.561Z,1513247491.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:31.605Z,1513247491.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:31.968Z,1513247491.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:31.993Z,1513247491.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:32.013Z,1513247492.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:32.451Z,1513247492.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:32.485Z,1513247492.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:32.753Z,1513247492.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:32.790Z,1513247492.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:32.806Z,1513247492.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:33.152Z,1513247493.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:33.183Z,1513247493.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:33.194Z,1513247493.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:33.567Z,1513247493.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:33.611Z,1513247493.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:33.969Z,1513247493.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:33.998Z,1513247493.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:34.015Z,1513247494.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:34.374Z,1513247494.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:34.488Z,1513247494.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:34.764Z,1513247494.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:34.793Z,1513247494.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:34.810Z,1513247494.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:35.169Z,1513247495.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:35.198Z,1513247495.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:35.247Z,1513247495.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:35.572Z,1513247495.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:35.611Z,1513247495.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:35.966Z,1513247495.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:35.993Z,1513247495.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:36.023Z,1513247496.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:36.364Z,1513247496.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:36.388Z,1513247496.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:36.794Z,1513247496.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:36.807Z,1513247496.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:36.887Z,1513247496.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:37.171Z,1513247497.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:37.197Z,1513247497.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:37.227Z,1513247497.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:37.573Z,1513247497.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:37.659Z,1513247497.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:37.971Z,1513247497.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:38.001Z,1513247498.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:38.012Z,1513247498.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:38.375Z,1513247498.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:38.418Z,1513247498.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:38.792Z,1513247498.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:38.797Z,1513247498.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:38.834Z,1513247498.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:39.179Z,1513247499.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:39.199Z,1513247499.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:39.209Z,1513247499.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:39.574Z,1513247499.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:39.630Z,1513247499.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:39.983Z,1513247499.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:40.009Z,1513247500.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:40.032Z,1513247500.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:40.456Z,1513247500.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:40.509Z,1513247500.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:40.753Z,1513247500.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:40.805Z,1513247500.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:40.810Z,1513247500.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:41.153Z,1513247501.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:41.184Z,1513247501.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:41.210Z,1513247501.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:41.565Z,1513247501.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:41.592Z,1513247501.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:41.960Z,1513247501.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:41.976Z,1513247501.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:42.005Z,1513247502.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:42.410Z,1513247502.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:42.458Z,1513247502.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:42.770Z,1513247502.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:42.794Z,1513247502.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:42.801Z,1513247502.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:43.170Z,1513247503.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:43.205Z,1513247503.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:43.209Z,1513247503.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:43.571Z,1513247503.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:43.603Z,1513247503.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:43.957Z,1513247503.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:43.972Z,1513247503.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:44.001Z,1513247504.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:44.429Z,1513247504.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:44.456Z,1513247504.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:44.760Z,1513247504.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:44.776Z,1513247504.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:44.798Z,1513247504.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:45.162Z,1513247505.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:45.177Z,1513247505.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:45.201Z,1513247505.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:45.569Z,1513247505.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:45.584Z,1513247505.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:45.962Z,1513247505.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:45.977Z,1513247505.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:45.997Z,1513247505.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:46.413Z,1513247506.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:46.467Z,1513247506.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:46.759Z,1513247506.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:46.775Z,1513247506.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:46.793Z,1513247506.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:47.156Z,1513247507.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:47.171Z,1513247507.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:47.197Z,1513247507.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:47.561Z,1513247507.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:47.576Z,1513247507.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:47.963Z,1513247507.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:47.977Z,1513247507.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:48.009Z,1513247508.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:48.364Z,1513247508.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:48.379Z,1513247508.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:48.769Z,1513247508.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:48.796Z,1513247508.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:48.805Z,1513247508.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:49.179Z,1513247509.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:49.199Z,1513247509.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:49.214Z,1513247509.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:49.574Z,1513247509.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:49.589Z,1513247509.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:49.951Z,1513247509.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:49.982Z,1513247509.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:50.025Z,1513247510.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:50.351Z,1513247510.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:50.384Z,1513247510.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:50.763Z,1513247510.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:50.800Z,1513247510.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:50.821Z,1513247510.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:51.151Z,1513247511.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:51.184Z,1513247511.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:51.225Z,1513247511.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:51.565Z,1513247511.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:51.594Z,1513247511.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:51.962Z,1513247511.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:51.996Z,1513247511.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:52.021Z,1513247512.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:52.369Z,1513247512.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:52.395Z,1513247512.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:52.768Z,1513247512.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:52.799Z,1513247512.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:52.817Z,1513247512.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:53.157Z,1513247513.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:53.176Z,1513247513.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:53.601Z,1513247513.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:53.613Z,1513247513.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:53.663Z,1513247513.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:53.966Z,1513247513.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:53.988Z,1513247513.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:54.381Z,1513247514.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:54.410Z,1513247514.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:54.426Z,1513247514.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:54.767Z,1513247514.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:54.795Z,1513247514.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:55.170Z,1513247515.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:55.184Z,1513247515.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:55.205Z,1513247515.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:55.570Z,1513247515.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:55.590Z,1513247515.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:55.966Z,1513247515.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:55.999Z,1513247515.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:56.002Z,1513247516.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:56.410Z,1513247516.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:56.446Z,1513247516.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:56.772Z,1513247516.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:56.798Z,1513247516.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:56.814Z,1513247516.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:57.163Z,1513247517.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:57.178Z,1513247517.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:57.573Z,1513247517.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:57.594Z,1513247517.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:57.627Z,1513247517.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:57.974Z,1513247517.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:58.005Z,1513247518.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:58.391Z,1513247518.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:58.392Z,1513247518.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:58.415Z,1513247518.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:58.752Z,1513247518.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:58.819Z,1513247518.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:59.145Z,1513247519.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:59.160Z,1513247519.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:59.185Z,1513247519.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:59.588Z,1513247519.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:31:59.603Z,1513247519.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:31:59.981Z,1513247519.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:00.003Z,1513247520.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:00.079Z,1513247520.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:00.404Z,1513247520.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:00.419Z,1513247520.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:00.777Z,1513247520.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:01.573Z,1513247521.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:02.370Z,1513247522.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:03.165Z,1513247523.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:03.888Z,1513247523.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:03.927Z,1513247523.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:03.961Z,1513247523.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:04.035Z,1513247524.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:04.075Z,1513247524.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:04.418Z,1513247524.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:04.448Z,1513247524.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:04.757Z,1513247524.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:04.826Z,1513247524.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:04.849Z,1513247524.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:05.206Z,1513247525.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:05.220Z,1513247525.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:05.554Z,1513247525.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:05.607Z,1513247525.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:05.622Z,1513247525.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:06.006Z,1513247526.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:06.020Z,1513247526.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:06.370Z,1513247526.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:06.453Z,1513247526.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:06.479Z,1513247526.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:06.808Z,1513247526.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:06.831Z,1513247526.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:07.169Z,1513247527.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:07.212Z,1513247527.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:07.227Z,1513247527.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:07.610Z,1513247527.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:07.625Z,1513247527.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:07.973Z,1513247527.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:08.009Z,1513247528.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:08.023Z,1513247528.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:08.413Z,1513247528.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:08.427Z,1513247528.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:08.769Z,1513247528.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:08.813Z,1513247528.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:08.827Z,1513247528.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:09.204Z,1513247529.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:09.219Z,1513247529.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:09.566Z,1513247529.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:09.632Z,1513247529.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:09.700Z,1513247529.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:10.036Z,1513247530.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:10.112Z,1513247530.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:10.364Z,1513247530.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:10.435Z,1513247530.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:10.482Z,1513247530.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:10.798Z,1513247530.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:10.826Z,1513247530.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:10.851Z,1513247530.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:11.193Z,1513247531.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:11.201Z,1513247531.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:11.235Z,1513247531.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:11.599Z,1513247531.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:11.605Z,1513247531.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:11.647Z,1513247531.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:12.000Z,1513247532.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.009Z,1513247532.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.054Z,1513247532.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:12.414Z,1513247532.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.423Z,1513247532.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.463Z,1513247532.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:12.818Z,1513247532.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.868Z,1513247532.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:12.903Z,1513247532.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:13.222Z,1513247533.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:13.244Z,1513247533.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:13.259Z,1513247533.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:13.602Z,1513247533.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:13.617Z,1513247533.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:13.625Z,1513247533.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.002Z,1513247534.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.028Z,1513247534.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:14.029Z,1513247534.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.426Z,1513247534.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.433Z,1513247534.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.474Z,1513247534.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:14.796Z,1513247534.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:14.823Z,1513247534.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:14.837Z,1513247534.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:15.213Z,1513247535.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:15.227Z,1513247535.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:15.241Z,1513247535.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:15.619Z,1513247535.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:15.636Z,1513247535.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:16.033Z,1513247536.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:16.037Z,1513247536.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:16.067Z,1513247536.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:16.487Z,1513247536.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:16.506Z,1513247536.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:16.799Z,1513247536.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:16.831Z,1513247536.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:16.834Z,1513247536.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:17.195Z,1513247537.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:17.215Z,1513247537.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:17.602Z,1513247537.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:17.616Z,1513247537.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:17.629Z,1513247537.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:18.007Z,1513247538.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:18.034Z,1513247538.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:18.400Z,1513247538.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:18.426Z,1513247538.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:18.428Z,1513247538.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:18.814Z,1513247538.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:18.829Z,1513247538.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:19.105Z,1513247539.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:19.231Z,1513247539.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:19.263Z,1513247539.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:19.633Z,1513247539.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:19.648Z,1513247539.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:19.902Z,1513247539.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:19.995Z,1513247539.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:20.012Z,1513247540.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:20.404Z,1513247540.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:20.439Z,1513247540.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:20.699Z,1513247540.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:20.796Z,1513247540.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:20.812Z,1513247540.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:21.117Z,1513247541.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:21.203Z,1513247541.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:21.219Z,1513247541.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:21.614Z,1513247541.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:21.649Z,1513247541.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:21.913Z,1513247541.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:22.019Z,1513247542.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:22.049Z,1513247542.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:22.451Z,1513247542.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:22.482Z,1513247542.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:22.709Z,1513247542.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:22.802Z,1513247542.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:22.839Z,1513247542.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:23.113Z,1513247543.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:23.199Z,1513247543.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:23.221Z,1513247543.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:23.612Z,1513247543.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:23.627Z,1513247543.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:23.927Z,1513247543.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:24.012Z,1513247544.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:24.082Z,1513247544.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:24.434Z,1513247544.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:24.468Z,1513247544.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:24.721Z,1513247544.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:24.806Z,1513247544.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:24.836Z,1513247544.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:25.125Z,1513247545.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:25.218Z,1513247545.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:25.285Z,1513247545.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:25.635Z,1513247545.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:25.663Z,1513247545.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:25.923Z,1513247545.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:26.007Z,1513247546.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:26.051Z,1513247546.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:26.418Z,1513247546.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:26.452Z,1513247546.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:26.717Z,1513247546.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:26.808Z,1513247546.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:26.842Z,1513247546.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:27.121Z,1513247547.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:27.203Z,1513247547.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:27.219Z,1513247547.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:27.614Z,1513247547.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:27.642Z,1513247547.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:27.917Z,1513247547.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:28.014Z,1513247548.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:28.045Z,1513247548.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:28.444Z,1513247548.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:28.458Z,1513247548.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:28.714Z,1513247548.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:28.820Z,1513247548.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:28.863Z,1513247548.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:29.117Z,1513247549.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:29.195Z,1513247549.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:29.224Z,1513247549.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:29.595Z,1513247549.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:29.620Z,1513247549.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:29.914Z,1513247549.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:30.028Z,1513247550.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:30.043Z,1513247550.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:30.463Z,1513247550.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:30.491Z,1513247550.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:30.710Z,1513247550.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:30.836Z,1513247550.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:30.856Z,1513247550.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:31.113Z,1513247551.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:31.214Z,1513247551.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:31.240Z,1513247551.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:31.613Z,1513247551.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:31.640Z,1513247551.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:31.909Z,1513247551.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:32.054Z,1513247552.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:32.095Z,1513247552.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:32.401Z,1513247552.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:32.415Z,1513247552.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:32.707Z,1513247552.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:32.806Z,1513247552.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:32.837Z,1513247552.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:33.118Z,1513247553.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:33.202Z,1513247553.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:33.216Z,1513247553.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:33.614Z,1513247553.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:33.646Z,1513247553.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:33.913Z,1513247553.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:34.017Z,1513247554.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:34.045Z,1513247554.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:34.417Z,1513247554.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:34.468Z,1513247554.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:34.711Z,1513247554.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:34.811Z,1513247554.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:34.843Z,1513247554.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:35.118Z,1513247555.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:35.242Z,1513247555.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:35.271Z,1513247555.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:35.605Z,1513247555.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:35.620Z,1513247555.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:35.913Z,1513247555.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:36.004Z,1513247556.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:36.023Z,1513247556.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:36.436Z,1513247556.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:36.462Z,1513247556.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:36.709Z,1513247556.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:36.805Z,1513247556.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:36.821Z,1513247556.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:37.113Z,1513247557.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:37.217Z,1513247557.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:37.249Z,1513247557.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:37.618Z,1513247557.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:37.648Z,1513247557.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:38.005Z,1513247558.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:38.019Z,1513247558.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:38.448Z,1513247558.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:38.507Z,1513247558.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:38.812Z,1513247558.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:38.828Z,1513247558.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:39.205Z,1513247559.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:39.220Z,1513247559.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:39.617Z,1513247559.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:39.632Z,1513247559.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:40.005Z,1513247560.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:40.020Z,1513247560.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:40.438Z,1513247560.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:40.452Z,1513247560.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:40.803Z,1513247560.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:40.820Z,1513247560.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:41.200Z,1513247561.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:41.214Z,1513247561.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:41.602Z,1513247561.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:41.642Z,1513247561.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:42.006Z,1513247562.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:42.027Z,1513247562.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:42.432Z,1513247562.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:42.455Z,1513247562.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:42.807Z,1513247562.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:42.835Z,1513247562.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:43.214Z,1513247563.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:43.235Z,1513247563.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:43.613Z,1513247563.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:43.629Z,1513247563.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:43.898Z,1513247563.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:43.999Z,1513247563.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:44.025Z,1513247564.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:44.457Z,1513247564.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:44.480Z,1513247564.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:44.693Z,1513247564.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:44.846Z,1513247564.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:44.898Z,1513247564.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:45.098Z,1513247565.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:45.204Z,1513247565.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:45.251Z,1513247565.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:45.612Z,1513247565.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:45.636Z,1513247565.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:45.893Z,1513247565.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:46.016Z,1513247566.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:46.050Z,1513247566.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:46.409Z,1513247566.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:46.467Z,1513247566.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:46.694Z,1513247566.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:46.818Z,1513247566.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:46.833Z,1513247566.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:47.129Z,1513247567.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:47.196Z,1513247567.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:47.233Z,1513247567.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:47.607Z,1513247567.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:47.663Z,1513247567.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:47.925Z,1513247567.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:48.040Z,1513247568.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:48.082Z,1513247568.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:48.395Z,1513247568.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:48.454Z,1513247568.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:48.723Z,1513247568.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:48.834Z,1513247568.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:48.855Z,1513247568.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:48.855Z,1513247568.855 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200
2017-12-14T10:32:48.855Z,1513247568.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:32:48.858Z,1513247568.858 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:48.858Z,1513247568.858 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 200
2017-12-14T10:32:48.858Z,1513247568.858 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:32:48.860Z,1513247568.860 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:48.860Z,1513247568.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200
2017-12-14T10:32:48.860Z,1513247568.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:32:48.909Z,1513247568.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:32:48.909Z,1513247568.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:32:48.910Z,1513247568.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:32:49.133Z,1513247569.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:49.217Z,1513247569.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:49.251Z,1513247569.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:32:49.251Z,1513247569.251 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200
2017-12-14T10:32:49.251Z,1513247569.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:32:49.252Z,1513247569.252 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 200
2017-12-14T10:32:49.252Z,1513247569.252 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:32:49.252Z,1513247569.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200
2017-12-14T10:32:49.615Z,1513247569.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:49.646Z,1513247569.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:32:49.646Z,1513247569.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:32:49.646Z,1513247569.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:32:49.647Z,1513247569.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:32:49.647Z,1513247569.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:32:49.648Z,1513247569.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:32:49.648Z,1513247569.648 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:32:49.648Z,1513247569.648 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:32:49.649Z,1513247569.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:32:49.929Z,1513247569.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:50.006Z,1513247570.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:50.037Z,1513247570.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:50.418Z,1513247570.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:50.441Z,1513247570.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:50.727Z,1513247570.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:50.806Z,1513247570.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:50.834Z,1513247570.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:51.133Z,1513247571.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:51.204Z,1513247571.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:51.223Z,1513247571.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:51.610Z,1513247571.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:51.631Z,1513247571.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:51.929Z,1513247571.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:52.025Z,1513247572.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:52.047Z,1513247572.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:52.426Z,1513247572.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:52.451Z,1513247572.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:52.725Z,1513247572.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:52.795Z,1513247572.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:52.827Z,1513247572.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:53.130Z,1513247573.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:53.195Z,1513247573.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:53.222Z,1513247573.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:53.596Z,1513247573.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:53.631Z,1513247573.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:53.925Z,1513247573.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:54.000Z,1513247574.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:54.027Z,1513247574.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:54.447Z,1513247574.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:54.495Z,1513247574.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:54.722Z,1513247574.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:54.831Z,1513247574.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:54.851Z,1513247574.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:55.125Z,1513247575.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:55.222Z,1513247575.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:55.237Z,1513247575.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:55.619Z,1513247575.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:55.634Z,1513247575.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:55.921Z,1513247575.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:56.004Z,1513247576.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:56.030Z,1513247576.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:56.433Z,1513247576.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:56.472Z,1513247576.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:56.717Z,1513247576.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:56.798Z,1513247576.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:56.827Z,1513247576.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:57.121Z,1513247577.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:57.199Z,1513247577.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:57.227Z,1513247577.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:57.639Z,1513247577.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:57.700Z,1513247577.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:57.917Z,1513247577.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:58.014Z,1513247578.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:58.045Z,1513247578.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:58.474Z,1513247578.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:58.503Z,1513247578.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:58.714Z,1513247578.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:58.800Z,1513247578.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:58.828Z,1513247578.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:59.117Z,1513247579.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:59.203Z,1513247579.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:59.223Z,1513247579.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:59.603Z,1513247579.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:32:59.624Z,1513247579.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:32:59.913Z,1513247579.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:00.005Z,1513247580.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:00.019Z,1513247580.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:00.410Z,1513247580.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:00.425Z,1513247580.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:00.711Z,1513247580.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:01.121Z,1513247581.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:01.917Z,1513247581.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:02.715Z,1513247582.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:03.129Z,1513247583.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:03.837Z,1513247583.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:03.919Z,1513247583.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:03.925Z,1513247583.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:04.058Z,1513247584.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:04.107Z,1513247584.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:04.429Z,1513247584.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:04.452Z,1513247584.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:04.721Z,1513247584.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:04.790Z,1513247584.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:04.817Z,1513247584.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:05.125Z,1513247585.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:05.184Z,1513247585.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:05.199Z,1513247585.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:05.578Z,1513247585.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:05.595Z,1513247585.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:05.979Z,1513247585.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:05.994Z,1513247585.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:06.426Z,1513247586.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:06.450Z,1513247586.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:06.792Z,1513247586.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:06.808Z,1513247586.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:07.186Z,1513247587.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:07.242Z,1513247587.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:07.598Z,1513247587.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:07.619Z,1513247587.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:07.971Z,1513247587.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:08.007Z,1513247588.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:08.421Z,1513247588.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:08.480Z,1513247588.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:08.794Z,1513247588.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:08.818Z,1513247588.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:09.175Z,1513247589.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:09.238Z,1513247589.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:09.589Z,1513247589.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:09.617Z,1513247589.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:09.978Z,1513247589.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:10.032Z,1513247590.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:10.444Z,1513247590.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:10.491Z,1513247590.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:10.788Z,1513247590.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:10.819Z,1513247590.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:11.178Z,1513247591.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:11.193Z,1513247591.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:11.578Z,1513247591.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:11.592Z,1513247591.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:11.909Z,1513247591.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:11.979Z,1513247591.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:11.994Z,1513247591.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:12.372Z,1513247592.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:12.452Z,1513247592.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:12.705Z,1513247592.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:12.794Z,1513247592.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:12.809Z,1513247592.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:13.109Z,1513247593.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:13.194Z,1513247593.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:13.208Z,1513247593.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:13.590Z,1513247593.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:13.604Z,1513247593.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:13.905Z,1513247593.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:13.988Z,1513247593.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:14.011Z,1513247594.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:14.375Z,1513247594.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:14.402Z,1513247594.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:14.703Z,1513247594.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:14.796Z,1513247594.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:14.816Z,1513247594.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:15.121Z,1513247595.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:15.171Z,1513247595.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:15.196Z,1513247595.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:15.599Z,1513247595.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:15.619Z,1513247595.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:15.917Z,1513247595.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:15.973Z,1513247595.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:16.011Z,1513247596.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:16.390Z,1513247596.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:16.410Z,1513247596.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:16.715Z,1513247596.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:16.807Z,1513247596.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:16.850Z,1513247596.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:17.121Z,1513247597.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:17.177Z,1513247597.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:17.193Z,1513247597.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:17.590Z,1513247597.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:17.621Z,1513247597.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:17.993Z,1513247597.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:18.019Z,1513247598.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:18.423Z,1513247598.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:18.483Z,1513247598.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:18.786Z,1513247598.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:18.801Z,1513247598.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:19.186Z,1513247599.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:19.200Z,1513247599.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:19.579Z,1513247599.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:19.599Z,1513247599.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:19.997Z,1513247599.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:20.034Z,1513247600.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:20.423Z,1513247600.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:20.449Z,1513247600.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:20.793Z,1513247600.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:20.808Z,1513247600.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:21.197Z,1513247601.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:21.212Z,1513247601.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:21.591Z,1513247601.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:21.606Z,1513247601.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:21.974Z,1513247601.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:21.998Z,1513247601.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:22.410Z,1513247602.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:22.449Z,1513247602.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:22.772Z,1513247602.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:22.800Z,1513247602.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:23.233Z,1513247603.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:23.261Z,1513247603.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:23.596Z,1513247603.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:23.611Z,1513247603.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:23.993Z,1513247603.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:24.007Z,1513247604.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:24.476Z,1513247604.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:24.491Z,1513247604.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:24.788Z,1513247604.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:24.803Z,1513247604.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:25.187Z,1513247605.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:25.207Z,1513247605.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:25.585Z,1513247605.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:25.600Z,1513247605.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:25.987Z,1513247605.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:26.007Z,1513247606.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:26.481Z,1513247606.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:26.524Z,1513247606.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:26.809Z,1513247606.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:26.824Z,1513247606.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:27.189Z,1513247607.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:27.219Z,1513247607.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:27.593Z,1513247607.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:27.627Z,1513247607.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:27.902Z,1513247607.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:27.976Z,1513247607.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:27.992Z,1513247607.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:28.377Z,1513247608.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:28.392Z,1513247608.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:28.699Z,1513247608.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:28.770Z,1513247608.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:28.801Z,1513247608.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:29.125Z,1513247609.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:29.186Z,1513247609.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:29.207Z,1513247609.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:29.591Z,1513247609.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:29.611Z,1513247609.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:30.004Z,1513247610.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:30.051Z,1513247610.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:30.397Z,1513247610.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:30.463Z,1513247610.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:30.798Z,1513247610.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:30.816Z,1513247610.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:31.175Z,1513247611.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:31.224Z,1513247611.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:31.581Z,1513247611.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:31.609Z,1513247611.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:32.000Z,1513247612.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:32.051Z,1513247612.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:32.431Z,1513247612.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:32.454Z,1513247612.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:32.801Z,1513247612.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:32.828Z,1513247612.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:33.180Z,1513247613.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:33.210Z,1513247613.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:33.575Z,1513247613.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:33.609Z,1513247613.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:33.976Z,1513247613.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:34.003Z,1513247614.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:34.414Z,1513247614.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:34.450Z,1513247614.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:34.790Z,1513247614.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:34.806Z,1513247614.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:35.183Z,1513247615.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:35.198Z,1513247615.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:35.582Z,1513247615.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:35.598Z,1513247615.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:36.043Z,1513247616.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:36.098Z,1513247616.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:36.434Z,1513247616.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:36.452Z,1513247616.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:36.786Z,1513247616.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:36.802Z,1513247616.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:37.180Z,1513247617.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:37.195Z,1513247617.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:37.582Z,1513247617.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:37.597Z,1513247617.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:37.986Z,1513247617.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:38.001Z,1513247618.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:38.428Z,1513247618.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:38.452Z,1513247618.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:38.782Z,1513247618.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:38.796Z,1513247618.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:39.202Z,1513247619.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:39.242Z,1513247619.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:39.587Z,1513247619.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:39.602Z,1513247619.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:39.981Z,1513247619.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:39.995Z,1513247619.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:40.402Z,1513247620.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:40.499Z,1513247620.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:40.792Z,1513247620.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:40.807Z,1513247620.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:41.190Z,1513247621.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:41.211Z,1513247621.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:41.589Z,1513247621.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:41.605Z,1513247621.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:41.982Z,1513247621.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:41.997Z,1513247621.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:42.389Z,1513247622.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:42.437Z,1513247622.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:42.791Z,1513247622.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:42.831Z,1513247622.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:43.182Z,1513247623.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:43.197Z,1513247623.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:43.590Z,1513247623.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:43.611Z,1513247623.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:43.989Z,1513247623.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:44.004Z,1513247624.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:44.391Z,1513247624.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:44.411Z,1513247624.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:44.786Z,1513247624.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:44.815Z,1513247624.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:45.178Z,1513247625.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:45.206Z,1513247625.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:45.595Z,1513247625.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:45.610Z,1513247625.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:45.986Z,1513247625.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:46.002Z,1513247626.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:46.427Z,1513247626.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:46.455Z,1513247626.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:46.789Z,1513247626.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:46.804Z,1513247626.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:47.168Z,1513247627.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:47.195Z,1513247627.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:47.586Z,1513247627.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:47.600Z,1513247627.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:47.987Z,1513247627.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:48.002Z,1513247628.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:48.417Z,1513247628.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:48.454Z,1513247628.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:48.800Z,1513247628.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:48.846Z,1513247628.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:49.199Z,1513247629.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:49.219Z,1513247629.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:49.587Z,1513247629.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:49.602Z,1513247629.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:49.985Z,1513247629.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:49.000Z,1513247630.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:50.416Z,1513247630.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:50.438Z,1513247630.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:50.784Z,1513247630.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:50.816Z,1513247630.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:51.175Z,1513247631.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:51.195Z,1513247631.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:51.589Z,1513247631.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:51.619Z,1513247631.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:51.996Z,1513247631.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:52.035Z,1513247632.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:52.428Z,1513247632.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:52.511Z,1513247632.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:52.781Z,1513247632.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:52.797Z,1513247632.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:53.179Z,1513247633.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:53.195Z,1513247633.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:53.579Z,1513247633.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:53.625Z,1513247633.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:53.982Z,1513247633.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:53.996Z,1513247633.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:54.376Z,1513247634.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:54.492Z,1513247634.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:54.793Z,1513247634.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:54.826Z,1513247634.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:55.216Z,1513247635.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:55.243Z,1513247635.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:55.594Z,1513247635.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:55.615Z,1513247635.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:55.894Z,1513247635.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:55.979Z,1513247635.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:55.999Z,1513247635.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:56.382Z,1513247636.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:56.396Z,1513247636.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:56.691Z,1513247636.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:56.777Z,1513247636.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:56.808Z,1513247636.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:57.121Z,1513247637.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:57.176Z,1513247637.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:57.190Z,1513247637.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:57.594Z,1513247637.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:57.619Z,1513247637.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:57.981Z,1513247637.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:58.017Z,1513247638.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:58.439Z,1513247638.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:58.490Z,1513247638.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:58.796Z,1513247638.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:58.828Z,1513247638.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:59.179Z,1513247639.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:59.199Z,1513247639.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:59.578Z,1513247639.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:59.592Z,1513247639.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:33:59.978Z,1513247639.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:33:59.994Z,1513247639.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:00.426Z,1513247640.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:00.461Z,1513247640.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:00.802Z,1513247640.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:00.831Z,1513247640.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:04.179Z,1513247644.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:04.221Z,1513247644.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:04.224Z,1513247644.224 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T10:29:03.6Z
2017-12-14T10:34:04.224Z,1513247644.224 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:34:04.224Z,1513247644.224 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:34:04.397Z,1513247644.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:04.436Z,1513247644.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:05.241Z,1513247645.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:05.255Z,1513247645.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:05.352Z,1513247645.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:05.396Z,1513247645.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:05.729Z,1513247645.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:05.744Z,1513247645.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:06.134Z,1513247646.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:06.148Z,1513247646.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:09.519Z,1513247649.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:09.551Z,1513247649.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:09.634Z,1513247649.634 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0232.lzma
2017-12-14T10:34:09.672Z,1513247649.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:09.720Z,1513247649.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:10.007Z,1513247650.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:10.045Z,1513247650.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:10.381Z,1513247650.381 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0232.lzma.bak
2017-12-14T10:34:10.381Z,1513247650.381 [DataOverHttps](INFO): SBD MOMSN=5438585
2017-12-14T10:34:10.403Z,1513247650.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:10.443Z,1513247650.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:11.735Z,1513247651.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:11.750Z,1513247651.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:11.855Z,1513247651.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:11.899Z,1513247651.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:15.342Z,1513247655.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:15.375Z,1513247655.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:15.486Z,1513247655.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:15.516Z,1513247655.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:15.842Z,1513247655.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:15.879Z,1513247655.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:16.232Z,1513247656.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:16.303Z,1513247656.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:16.636Z,1513247656.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:16.655Z,1513247656.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:17.039Z,1513247657.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:17.094Z,1513247657.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:20.646Z,1513247660.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:20.686Z,1513247660.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:20.754Z,1513247660.754 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20171214T002839/Express0233.lzma
2017-12-14T10:34:20.790Z,1513247660.790 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:34:20.791Z,1513247660.791 [NAL9602] Data Fault, FailCount= 5
2017-12-14T10:34:20.791Z,1513247660.791 [NAL9602](ERROR): Data Fault
2017-12-14T10:34:20.810Z,1513247660.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:20.874Z,1513247660.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:20.904Z,1513247660.904 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:34:20.913Z,1513247660.913 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T10:34:21.125Z,1513247661.125 [NAL9602](INFO): Powering down
2017-12-14T10:34:21.154Z,1513247661.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:21.186Z,1513247661.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:21.210Z,1513247661.210 [CBIT](INFO): Critical error at 20171214T103420
2017-12-14T10:34:21.517Z,1513247661.517 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0233.lzma.bak
2017-12-14T10:34:21.517Z,1513247661.517 [DataOverHttps](INFO): SBD MOMSN=5438587
2017-12-14T10:34:21.539Z,1513247661.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:21.574Z,1513247661.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:22.771Z,1513247662.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:22.786Z,1513247662.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:22.815Z,1513247662.815 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:34:22.815Z,1513247662.815 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:34:22.815Z,1513247662.815 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:34:22.894Z,1513247662.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:22.927Z,1513247662.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:25.137Z,1513247665.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:25.933Z,1513247665.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:26.258Z,1513247666.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:26.280Z,1513247666.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:26.376Z,1513247666.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:26.398Z,1513247666.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:26.786Z,1513247666.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:26.819Z,1513247666.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:27.159Z,1513247667.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:27.199Z,1513247667.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:27.569Z,1513247667.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:27.583Z,1513247667.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:27.966Z,1513247667.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:27.987Z,1513247667.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:28.434Z,1513247668.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:28.468Z,1513247668.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:28.755Z,1513247668.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:28.779Z,1513247668.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:29.168Z,1513247669.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:29.226Z,1513247669.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:29.566Z,1513247669.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:29.581Z,1513247669.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:29.969Z,1513247669.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:29.984Z,1513247669.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:30.447Z,1513247670.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:30.481Z,1513247670.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:30.772Z,1513247670.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:30.787Z,1513247670.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:31.164Z,1513247671.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:31.179Z,1513247671.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:31.570Z,1513247671.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:31.584Z,1513247671.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:31.963Z,1513247671.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:31.978Z,1513247671.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:32.410Z,1513247672.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:32.450Z,1513247672.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:32.757Z,1513247672.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:32.791Z,1513247672.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:33.172Z,1513247673.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:33.197Z,1513247673.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:33.559Z,1513247673.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:33.574Z,1513247673.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:33.968Z,1513247673.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:33.994Z,1513247673.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:34.416Z,1513247674.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:34.446Z,1513247674.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:34.751Z,1513247674.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:34.766Z,1513247674.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:35.159Z,1513247675.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:35.190Z,1513247675.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:35.560Z,1513247675.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:35.575Z,1513247675.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:35.959Z,1513247675.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:35.982Z,1513247675.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:36.366Z,1513247676.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:36.452Z,1513247676.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:36.783Z,1513247676.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:36.807Z,1513247676.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:37.163Z,1513247677.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:37.196Z,1513247677.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:37.559Z,1513247677.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:37.585Z,1513247677.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:37.955Z,1513247677.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:37.987Z,1513247677.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:38.359Z,1513247678.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:38.396Z,1513247678.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:38.790Z,1513247678.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:38.816Z,1513247678.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:39.159Z,1513247679.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:39.191Z,1513247679.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:39.559Z,1513247679.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:39.590Z,1513247679.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:39.986Z,1513247679.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:40.044Z,1513247680.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:40.356Z,1513247680.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:40.391Z,1513247680.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:40.765Z,1513247680.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:40.810Z,1513247680.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:41.163Z,1513247681.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:41.278Z,1513247681.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:41.562Z,1513247681.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:41.587Z,1513247681.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:41.973Z,1513247681.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:41.988Z,1513247681.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:42.421Z,1513247682.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:42.467Z,1513247682.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:42.773Z,1513247682.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:42.789Z,1513247682.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:43.215Z,1513247683.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:43.279Z,1513247683.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:43.562Z,1513247683.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:43.583Z,1513247683.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:43.952Z,1513247683.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:43.979Z,1513247683.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:44.408Z,1513247684.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:44.448Z,1513247684.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:44.780Z,1513247684.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:44.810Z,1513247684.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:45.159Z,1513247685.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:45.190Z,1513247685.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:45.559Z,1513247685.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:45.594Z,1513247685.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:45.961Z,1513247685.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:45.980Z,1513247685.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:46.461Z,1513247686.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:46.476Z,1513247686.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:46.766Z,1513247686.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:46.788Z,1513247686.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:47.167Z,1513247687.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:47.187Z,1513247687.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:47.565Z,1513247687.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:47.579Z,1513247687.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:47.964Z,1513247687.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:47.979Z,1513247687.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:48.417Z,1513247688.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:48.435Z,1513247688.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:48.752Z,1513247688.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:48.775Z,1513247688.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:49.159Z,1513247689.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:49.184Z,1513247689.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:49.563Z,1513247689.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:49.599Z,1513247689.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:49.958Z,1513247689.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:49.983Z,1513247689.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:50.364Z,1513247690.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:50.389Z,1513247690.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:50.765Z,1513247690.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:50.780Z,1513247690.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:51.166Z,1513247691.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:51.191Z,1513247691.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:51.552Z,1513247691.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:51.614Z,1513247691.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:51.978Z,1513247691.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:51.993Z,1513247691.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:52.368Z,1513247692.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:52.383Z,1513247692.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:52.768Z,1513247692.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:52.831Z,1513247692.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:53.155Z,1513247693.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:53.175Z,1513247693.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:53.555Z,1513247693.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:53.591Z,1513247693.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:53.959Z,1513247693.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:53.994Z,1513247693.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:54.363Z,1513247694.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:54.395Z,1513247694.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:54.760Z,1513247694.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:54.798Z,1513247694.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:55.156Z,1513247695.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:55.187Z,1513247695.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:55.560Z,1513247695.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:55.590Z,1513247695.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:55.951Z,1513247695.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:56.004Z,1513247696.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:56.382Z,1513247696.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:56.426Z,1513247696.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:56.756Z,1513247696.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:56.784Z,1513247696.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:57.155Z,1513247697.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:57.191Z,1513247697.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:57.567Z,1513247697.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:57.584Z,1513247697.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:57.967Z,1513247697.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:57.982Z,1513247697.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:58.403Z,1513247698.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:58.433Z,1513247698.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:58.763Z,1513247698.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:58.778Z,1513247698.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:59.164Z,1513247699.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:59.188Z,1513247699.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:59.563Z,1513247699.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:59.583Z,1513247699.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:34:59.960Z,1513247699.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:34:59.981Z,1513247699.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:00.414Z,1513247700.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:00.465Z,1513247700.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:00.763Z,1513247700.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:00.787Z,1513247700.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:01.169Z,1513247701.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:01.184Z,1513247701.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:01.556Z,1513247701.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:01.587Z,1513247701.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:01.969Z,1513247701.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:01.984Z,1513247701.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:02.434Z,1513247702.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:02.472Z,1513247702.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:02.755Z,1513247702.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:02.786Z,1513247702.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:03.155Z,1513247703.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:03.187Z,1513247703.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:03.556Z,1513247703.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:03.615Z,1513247703.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:03.960Z,1513247703.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:04.012Z,1513247704.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:04.359Z,1513247704.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:04.433Z,1513247704.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:04.762Z,1513247704.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:04.818Z,1513247704.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:05.160Z,1513247705.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:05.187Z,1513247705.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:05.564Z,1513247705.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:05.611Z,1513247705.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:05.964Z,1513247705.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:05.979Z,1513247705.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:06.362Z,1513247706.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:06.387Z,1513247706.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:06.770Z,1513247706.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:06.813Z,1513247706.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:07.155Z,1513247707.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:07.182Z,1513247707.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:07.555Z,1513247707.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:07.579Z,1513247707.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:07.973Z,1513247707.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:07.988Z,1513247707.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:08.355Z,1513247708.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:08.382Z,1513247708.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:08.806Z,1513247708.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:08.839Z,1513247708.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:09.159Z,1513247709.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:09.187Z,1513247709.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:09.555Z,1513247709.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:09.591Z,1513247709.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:09.958Z,1513247709.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:09.991Z,1513247709.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:10.434Z,1513247710.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:10.453Z,1513247710.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:10.756Z,1513247710.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:10.795Z,1513247710.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:11.160Z,1513247711.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:11.182Z,1513247711.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:11.559Z,1513247711.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:11.574Z,1513247711.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:11.955Z,1513247711.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:12.006Z,1513247712.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:12.422Z,1513247712.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:12.462Z,1513247712.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:12.759Z,1513247712.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:12.790Z,1513247712.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:13.159Z,1513247713.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:13.173Z,1513247713.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:13.563Z,1513247713.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:13.577Z,1513247713.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:13.959Z,1513247713.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:14.002Z,1513247714.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:14.420Z,1513247714.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:14.448Z,1513247714.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:14.771Z,1513247714.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:14.799Z,1513247714.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:15.226Z,1513247715.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:15.276Z,1513247715.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:15.559Z,1513247715.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:15.587Z,1513247715.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:15.956Z,1513247715.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:15.990Z,1513247715.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:16.427Z,1513247716.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:16.452Z,1513247716.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:16.755Z,1513247716.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:16.791Z,1513247716.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:17.159Z,1513247717.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:17.185Z,1513247717.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:17.559Z,1513247717.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:17.585Z,1513247717.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:17.954Z,1513247717.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:17.976Z,1513247717.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:18.362Z,1513247718.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:18.471Z,1513247718.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:18.773Z,1513247718.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:18.803Z,1513247718.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:19.161Z,1513247719.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:19.175Z,1513247719.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:19.562Z,1513247719.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:19.577Z,1513247719.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:19.960Z,1513247719.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:19.975Z,1513247719.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:20.361Z,1513247720.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:20.375Z,1513247720.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:20.779Z,1513247720.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:20.814Z,1513247720.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:21.162Z,1513247721.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:21.185Z,1513247721.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:21.571Z,1513247721.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:21.586Z,1513247721.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:21.972Z,1513247721.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:21.986Z,1513247721.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:22.368Z,1513247722.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:22.384Z,1513247722.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:22.782Z,1513247722.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:22.814Z,1513247722.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:23.167Z,1513247723.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:23.182Z,1513247723.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:23.573Z,1513247723.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:23.588Z,1513247723.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:27.118Z,1513247727.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:27.199Z,1513247727.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:27.285Z,1513247727.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:27.318Z,1513247727.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:27.675Z,1513247727.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:27.690Z,1513247727.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:28.087Z,1513247728.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:28.151Z,1513247728.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:28.486Z,1513247728.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:28.501Z,1513247728.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:28.880Z,1513247728.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:28.934Z,1513247728.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:29.278Z,1513247729.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:29.292Z,1513247729.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:29.674Z,1513247729.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:29.695Z,1513247729.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:30.072Z,1513247730.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:30.086Z,1513247730.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:30.474Z,1513247730.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:30.488Z,1513247730.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:30.869Z,1513247730.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:30.901Z,1513247730.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:31.273Z,1513247731.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:31.289Z,1513247731.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:31.678Z,1513247731.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:31.692Z,1513247731.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:32.074Z,1513247732.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:32.094Z,1513247732.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:32.479Z,1513247732.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:32.493Z,1513247732.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:32.870Z,1513247732.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:32.885Z,1513247732.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:33.271Z,1513247733.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:33.286Z,1513247733.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:33.671Z,1513247733.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:33.686Z,1513247733.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:34.074Z,1513247734.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:34.088Z,1513247734.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:34.477Z,1513247734.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:34.492Z,1513247734.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:34.871Z,1513247734.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:34.886Z,1513247734.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:35.272Z,1513247735.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:35.296Z,1513247735.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:35.676Z,1513247735.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:35.696Z,1513247735.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:36.076Z,1513247736.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:36.090Z,1513247736.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:36.473Z,1513247736.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:36.488Z,1513247736.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:36.875Z,1513247736.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:36.890Z,1513247736.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:37.276Z,1513247737.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:37.352Z,1513247737.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:37.674Z,1513247737.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:37.690Z,1513247737.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:37.921Z,1513247737.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:38.076Z,1513247738.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:38.095Z,1513247738.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:38.477Z,1513247738.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:38.491Z,1513247738.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:38.717Z,1513247738.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:38.872Z,1513247738.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:38.894Z,1513247738.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:39.121Z,1513247739.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:39.270Z,1513247739.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:39.292Z,1513247739.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:39.680Z,1513247739.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:39.695Z,1513247739.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:40.072Z,1513247740.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:40.088Z,1513247740.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:40.474Z,1513247740.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:40.496Z,1513247740.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:40.874Z,1513247740.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:40.888Z,1513247740.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:41.273Z,1513247741.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:41.289Z,1513247741.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:41.670Z,1513247741.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:41.703Z,1513247741.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:42.078Z,1513247742.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:42.095Z,1513247742.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:42.474Z,1513247742.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:42.490Z,1513247742.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:42.879Z,1513247742.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:42.895Z,1513247742.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:43.278Z,1513247743.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:43.305Z,1513247743.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:43.691Z,1513247743.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:43.711Z,1513247743.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:44.068Z,1513247744.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:44.094Z,1513247744.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:44.467Z,1513247744.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:44.499Z,1513247744.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:44.879Z,1513247744.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:44.894Z,1513247744.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:45.266Z,1513247745.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:45.292Z,1513247745.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:45.666Z,1513247745.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:45.699Z,1513247745.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:46.070Z,1513247746.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:46.098Z,1513247746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:46.486Z,1513247746.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:46.507Z,1513247746.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:46.870Z,1513247746.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:46.900Z,1513247746.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:47.275Z,1513247747.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:47.295Z,1513247747.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:47.672Z,1513247747.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:47.686Z,1513247747.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:48.075Z,1513247748.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:48.089Z,1513247748.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:48.472Z,1513247748.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:48.487Z,1513247748.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:48.877Z,1513247748.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:48.940Z,1513247748.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:49.275Z,1513247749.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:49.290Z,1513247749.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:49.675Z,1513247749.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:49.739Z,1513247749.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:49.739Z,1513247749.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201
2017-12-14T10:35:49.739Z,1513247749.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:35:49.745Z,1513247749.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:49.745Z,1513247749.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 201
2017-12-14T10:35:49.745Z,1513247749.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:35:49.747Z,1513247749.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:49.747Z,1513247749.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201
2017-12-14T10:35:49.747Z,1513247749.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:35:49.768Z,1513247749.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:35:49.768Z,1513247749.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:35:49.768Z,1513247749.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:35:49.922Z,1513247749.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:50.105Z,1513247750.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:50.151Z,1513247750.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:35:50.151Z,1513247750.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201
2017-12-14T10:35:50.152Z,1513247750.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:35:50.152Z,1513247750.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 201
2017-12-14T10:35:50.152Z,1513247750.152 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:35:50.152Z,1513247750.152 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201
2017-12-14T10:35:50.467Z,1513247750.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:50.498Z,1513247750.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:35:50.498Z,1513247750.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:35:50.499Z,1513247750.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:35:50.499Z,1513247750.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:35:50.499Z,1513247750.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:35:50.500Z,1513247750.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:35:50.500Z,1513247750.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:35:50.500Z,1513247750.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:35:50.501Z,1513247750.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:35:50.719Z,1513247750.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:50.880Z,1513247750.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:50.935Z,1513247750.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:51.137Z,1513247751.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:51.265Z,1513247751.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:51.295Z,1513247751.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:51.678Z,1513247751.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:51.715Z,1513247751.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:51.933Z,1513247751.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:52.078Z,1513247752.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:52.092Z,1513247752.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:52.466Z,1513247752.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:52.496Z,1513247752.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:52.729Z,1513247752.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:52.887Z,1513247752.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:52.902Z,1513247752.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:53.133Z,1513247753.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:53.323Z,1513247753.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:53.350Z,1513247753.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:53.666Z,1513247753.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:53.703Z,1513247753.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:54.070Z,1513247754.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:54.094Z,1513247754.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:54.466Z,1513247754.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:54.491Z,1513247754.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:54.866Z,1513247754.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:54.899Z,1513247754.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:55.283Z,1513247755.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:55.297Z,1513247755.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:55.671Z,1513247755.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:55.697Z,1513247755.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:56.066Z,1513247756.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:56.091Z,1513247756.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:56.499Z,1513247756.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:56.550Z,1513247756.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:56.866Z,1513247756.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:56.899Z,1513247756.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:57.266Z,1513247757.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:57.292Z,1513247757.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:57.666Z,1513247757.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:57.691Z,1513247757.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:58.065Z,1513247758.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:58.103Z,1513247758.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:58.466Z,1513247758.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:58.500Z,1513247758.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:58.866Z,1513247758.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:58.904Z,1513247758.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:59.266Z,1513247759.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:59.293Z,1513247759.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:35:59.717Z,1513247759.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:35:59.755Z,1513247759.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:00.066Z,1513247760.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:00.103Z,1513247760.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:00.494Z,1513247760.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:00.514Z,1513247760.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:00.866Z,1513247760.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:00.907Z,1513247760.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:01.268Z,1513247761.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:01.283Z,1513247761.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:01.674Z,1513247761.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:01.705Z,1513247761.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:02.074Z,1513247762.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:02.088Z,1513247762.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:02.470Z,1513247762.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:02.485Z,1513247762.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:02.889Z,1513247762.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:02.929Z,1513247762.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:03.275Z,1513247763.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:03.290Z,1513247763.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:03.674Z,1513247763.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:03.689Z,1513247763.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:03.925Z,1513247763.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:04.068Z,1513247764.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:04.083Z,1513247764.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:04.470Z,1513247764.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:04.485Z,1513247764.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:04.723Z,1513247764.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:04.876Z,1513247764.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:04.915Z,1513247764.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:05.133Z,1513247765.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:05.268Z,1513247765.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:05.283Z,1513247765.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:05.670Z,1513247765.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:05.686Z,1513247765.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:05.930Z,1513247765.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:06.091Z,1513247766.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:06.118Z,1513247766.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:06.470Z,1513247766.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:06.485Z,1513247766.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:06.725Z,1513247766.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:06.876Z,1513247766.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:06.913Z,1513247766.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:07.129Z,1513247767.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:07.275Z,1513247767.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:07.311Z,1513247767.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:07.672Z,1513247767.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:07.687Z,1513247767.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:08.072Z,1513247768.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:08.087Z,1513247768.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:08.474Z,1513247768.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:08.492Z,1513247768.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:08.871Z,1513247768.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:08.890Z,1513247768.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:09.300Z,1513247769.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:09.344Z,1513247769.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:09.675Z,1513247769.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:09.690Z,1513247769.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:10.076Z,1513247770.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:10.091Z,1513247770.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:10.474Z,1513247770.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:10.488Z,1513247770.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:10.874Z,1513247770.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:10.890Z,1513247770.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:11.273Z,1513247771.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:11.288Z,1513247771.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:11.676Z,1513247771.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:11.755Z,1513247771.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:12.072Z,1513247772.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:12.096Z,1513247772.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:12.518Z,1513247772.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:12.546Z,1513247772.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:12.871Z,1513247772.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:12.918Z,1513247772.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:13.277Z,1513247773.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:13.292Z,1513247773.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:13.678Z,1513247773.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:13.731Z,1513247773.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:14.074Z,1513247774.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:14.089Z,1513247774.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:14.492Z,1513247774.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:14.506Z,1513247774.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:14.875Z,1513247774.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:14.897Z,1513247774.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:15.274Z,1513247775.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:15.289Z,1513247775.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:15.701Z,1513247775.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:15.732Z,1513247775.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:16.075Z,1513247776.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:16.090Z,1513247776.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:16.475Z,1513247776.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:16.489Z,1513247776.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:16.889Z,1513247776.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:16.904Z,1513247776.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:17.278Z,1513247777.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:17.307Z,1513247777.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:17.669Z,1513247777.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:17.704Z,1513247777.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:17.914Z,1513247777.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:18.068Z,1513247778.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:18.141Z,1513247778.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:18.468Z,1513247778.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:18.510Z,1513247778.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:18.711Z,1513247778.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:18.894Z,1513247778.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:18.950Z,1513247778.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:19.146Z,1513247779.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:19.268Z,1513247779.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:19.312Z,1513247779.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:19.673Z,1513247779.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:19.713Z,1513247779.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:19.946Z,1513247779.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:20.081Z,1513247780.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:20.122Z,1513247780.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:20.476Z,1513247780.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:20.532Z,1513247780.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:20.742Z,1513247780.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:20.887Z,1513247780.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:20.931Z,1513247780.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:20.981Z,1513247780.981 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:36:20.982Z,1513247780.982 [NAL9602] No Fault, FailCount= 5
2017-12-14T10:36:21.146Z,1513247781.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:21.250Z,1513247781.250 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:36:21.283Z,1513247781.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:21.342Z,1513247781.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:21.679Z,1513247781.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:21.708Z,1513247781.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:22.068Z,1513247782.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:22.192Z,1513247782.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:22.497Z,1513247782.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:22.553Z,1513247782.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:22.898Z,1513247782.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:22.927Z,1513247782.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:23.268Z,1513247783.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:23.317Z,1513247783.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:23.712Z,1513247783.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:23.779Z,1513247783.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:27.978Z,1513247787.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:28.001Z,1513247788.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:28.125Z,1513247788.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:28.170Z,1513247788.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:28.503Z,1513247788.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:28.531Z,1513247788.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:28.862Z,1513247788.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:28.931Z,1513247788.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:29.244Z,1513247789.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:29.284Z,1513247789.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:29.647Z,1513247789.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:29.682Z,1513247789.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:30.062Z,1513247790.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:30.112Z,1513247790.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:30.467Z,1513247790.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:30.490Z,1513247790.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:30.871Z,1513247790.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:30.911Z,1513247790.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:31.265Z,1513247791.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:31.365Z,1513247791.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:31.664Z,1513247791.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:31.683Z,1513247791.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:31.930Z,1513247791.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:32.084Z,1513247792.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:32.127Z,1513247792.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:32.442Z,1513247792.442 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:36:32.476Z,1513247792.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:32.530Z,1513247792.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:32.728Z,1513247792.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:32.873Z,1513247792.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:32.895Z,1513247792.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:33.138Z,1513247793.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:33.311Z,1513247793.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:33.344Z,1513247793.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:33.676Z,1513247793.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:33.707Z,1513247793.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:33.934Z,1513247793.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:34.089Z,1513247794.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:34.195Z,1513247794.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:34.448Z,1513247794.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:34.490Z,1513247794.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:34.730Z,1513247794.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:34.870Z,1513247794.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:34.923Z,1513247794.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:35.134Z,1513247795.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:35.265Z,1513247795.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:35.292Z,1513247795.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:35.670Z,1513247795.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:35.735Z,1513247795.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:36.072Z,1513247796.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:36.095Z,1513247796.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:36.482Z,1513247796.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:36.534Z,1513247796.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:36.849Z,1513247796.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:36.899Z,1513247796.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:37.249Z,1513247797.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:37.288Z,1513247797.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:37.658Z,1513247797.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:37.693Z,1513247797.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:38.056Z,1513247798.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:38.110Z,1513247798.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:38.448Z,1513247798.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:38.502Z,1513247798.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:38.890Z,1513247798.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:38.953Z,1513247798.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:39.275Z,1513247799.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:39.345Z,1513247799.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:39.668Z,1513247799.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:39.703Z,1513247799.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:40.066Z,1513247800.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:40.110Z,1513247800.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:40.458Z,1513247800.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:40.514Z,1513247800.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:40.862Z,1513247800.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:40.912Z,1513247800.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:41.270Z,1513247801.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:41.313Z,1513247801.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:41.663Z,1513247801.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:41.700Z,1513247801.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:42.063Z,1513247802.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:42.107Z,1513247802.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:42.468Z,1513247802.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:42.512Z,1513247802.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:42.869Z,1513247802.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:42.883Z,1513247802.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:43.258Z,1513247803.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:43.286Z,1513247803.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:43.674Z,1513247803.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:43.722Z,1513247803.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:44.055Z,1513247804.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:44.116Z,1513247804.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:44.477Z,1513247804.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:44.499Z,1513247804.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:44.875Z,1513247804.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:44.899Z,1513247804.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:45.269Z,1513247805.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:45.305Z,1513247805.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:45.661Z,1513247805.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:45.676Z,1513247805.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:46.054Z,1513247806.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:46.072Z,1513247806.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:46.461Z,1513247806.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:46.475Z,1513247806.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:46.855Z,1513247806.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:46.878Z,1513247806.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:47.266Z,1513247807.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:47.281Z,1513247807.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:47.668Z,1513247807.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:47.684Z,1513247807.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:48.062Z,1513247808.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:48.103Z,1513247808.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:48.478Z,1513247808.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:48.506Z,1513247808.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:48.859Z,1513247808.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:48.887Z,1513247808.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:49.247Z,1513247809.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:49.263Z,1513247809.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:49.651Z,1513247809.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:49.693Z,1513247809.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:50.052Z,1513247810.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:50.066Z,1513247810.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:50.451Z,1513247810.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:50.466Z,1513247810.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:50.869Z,1513247810.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:50.899Z,1513247810.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:51.265Z,1513247811.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:51.294Z,1513247811.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:51.747Z,1513247811.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:51.797Z,1513247811.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:52.059Z,1513247812.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:52.094Z,1513247812.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:52.463Z,1513247812.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:52.493Z,1513247812.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:52.854Z,1513247812.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:52.879Z,1513247812.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:53.256Z,1513247813.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:53.275Z,1513247813.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:53.662Z,1513247813.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:53.683Z,1513247813.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:54.066Z,1513247814.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:54.081Z,1513247814.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:54.463Z,1513247814.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:54.483Z,1513247814.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:54.861Z,1513247814.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:54.877Z,1513247814.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:55.270Z,1513247815.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:55.291Z,1513247815.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:55.655Z,1513247815.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:55.676Z,1513247815.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:56.057Z,1513247816.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:56.072Z,1513247816.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:56.469Z,1513247816.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:56.555Z,1513247816.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:56.866Z,1513247816.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:56.893Z,1513247816.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:57.271Z,1513247817.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:57.327Z,1513247817.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:57.666Z,1513247817.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:57.687Z,1513247817.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:58.094Z,1513247818.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:58.147Z,1513247818.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:58.448Z,1513247818.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:58.486Z,1513247818.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:58.848Z,1513247818.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:58.883Z,1513247818.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:59.247Z,1513247819.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:59.274Z,1513247819.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:36:59.676Z,1513247819.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:36:59.690Z,1513247819.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:00.058Z,1513247820.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:00.098Z,1513247820.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:00.456Z,1513247820.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:00.488Z,1513247820.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:00.847Z,1513247820.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:00.867Z,1513247820.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:01.264Z,1513247821.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:01.306Z,1513247821.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:01.654Z,1513247821.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:01.668Z,1513247821.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:02.053Z,1513247822.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:02.068Z,1513247822.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:02.451Z,1513247822.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:02.471Z,1513247822.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:02.870Z,1513247822.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:02.900Z,1513247822.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:03.261Z,1513247823.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:03.276Z,1513247823.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:03.658Z,1513247823.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:03.673Z,1513247823.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:04.056Z,1513247824.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:04.070Z,1513247824.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:04.495Z,1513247824.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:04.550Z,1513247824.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:04.856Z,1513247824.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:04.871Z,1513247824.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:05.255Z,1513247825.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:05.270Z,1513247825.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:05.661Z,1513247825.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:05.676Z,1513247825.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:06.086Z,1513247826.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:06.113Z,1513247826.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:06.458Z,1513247826.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:06.515Z,1513247826.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:06.852Z,1513247826.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:06.875Z,1513247826.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:07.255Z,1513247827.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:07.270Z,1513247827.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:07.691Z,1513247827.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:07.715Z,1513247827.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:08.047Z,1513247828.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:08.074Z,1513247828.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:08.470Z,1513247828.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:08.485Z,1513247828.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:08.864Z,1513247828.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:08.897Z,1513247828.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:09.274Z,1513247829.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:09.295Z,1513247829.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:09.681Z,1513247829.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:09.696Z,1513247829.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:10.058Z,1513247830.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:10.073Z,1513247830.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:10.474Z,1513247830.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:10.539Z,1513247830.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:10.874Z,1513247830.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:10.922Z,1513247830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:11.267Z,1513247831.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:11.282Z,1513247831.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:11.685Z,1513247831.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:11.699Z,1513247831.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:12.049Z,1513247832.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:12.086Z,1513247832.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:12.475Z,1513247832.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:12.496Z,1513247832.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:12.878Z,1513247832.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:12.893Z,1513247832.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:13.261Z,1513247833.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:13.293Z,1513247833.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:13.653Z,1513247833.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:13.676Z,1513247833.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:14.068Z,1513247834.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:14.100Z,1513247834.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:14.463Z,1513247834.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:14.495Z,1513247834.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:14.864Z,1513247834.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:14.899Z,1513247834.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:15.301Z,1513247835.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:15.316Z,1513247835.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:15.666Z,1513247835.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:15.695Z,1513247835.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:16.053Z,1513247836.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:16.172Z,1513247836.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:16.469Z,1513247836.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:16.502Z,1513247836.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:16.852Z,1513247836.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:16.875Z,1513247836.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:17.302Z,1513247837.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:17.329Z,1513247837.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:17.666Z,1513247837.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:17.681Z,1513247837.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:18.065Z,1513247838.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:18.081Z,1513247838.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:18.465Z,1513247838.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:18.554Z,1513247838.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:18.868Z,1513247838.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:18.884Z,1513247838.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:19.247Z,1513247839.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:19.317Z,1513247839.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:19.651Z,1513247839.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:19.676Z,1513247839.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:20.049Z,1513247840.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:20.100Z,1513247840.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:20.471Z,1513247840.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:20.490Z,1513247840.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:20.877Z,1513247840.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:20.892Z,1513247840.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:21.270Z,1513247841.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:21.291Z,1513247841.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:21.670Z,1513247841.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:21.684Z,1513247841.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:22.047Z,1513247842.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:22.073Z,1513247842.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:22.447Z,1513247842.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:22.479Z,1513247842.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:22.849Z,1513247842.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:22.883Z,1513247842.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:23.251Z,1513247843.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:23.278Z,1513247843.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:23.696Z,1513247843.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:23.876Z,1513247843.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:24.065Z,1513247844.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:24.092Z,1513247844.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:27.552Z,1513247847.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:27.567Z,1513247847.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:27.676Z,1513247847.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:27.704Z,1513247847.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:28.031Z,1513247848.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:28.064Z,1513247848.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:28.432Z,1513247848.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:28.498Z,1513247848.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:28.835Z,1513247848.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:28.861Z,1513247848.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:29.236Z,1513247849.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:29.267Z,1513247849.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:29.659Z,1513247849.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:29.674Z,1513247849.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:30.056Z,1513247850.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:30.071Z,1513247850.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:30.451Z,1513247850.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:30.466Z,1513247850.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:30.835Z,1513247850.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:30.862Z,1513247850.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:31.231Z,1513247851.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:31.259Z,1513247851.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:31.631Z,1513247851.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:31.659Z,1513247851.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:32.036Z,1513247852.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:32.066Z,1513247852.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:32.432Z,1513247852.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:32.461Z,1513247852.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:32.855Z,1513247852.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:32.870Z,1513247852.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:33.255Z,1513247853.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:33.275Z,1513247853.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:33.651Z,1513247853.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:33.667Z,1513247853.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:34.032Z,1513247854.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:34.063Z,1513247854.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:34.432Z,1513247854.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:34.464Z,1513247854.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:34.832Z,1513247854.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:34.859Z,1513247854.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:35.235Z,1513247855.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:35.272Z,1513247855.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:35.658Z,1513247855.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:35.679Z,1513247855.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:36.046Z,1513247856.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:36.083Z,1513247856.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:36.468Z,1513247856.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:36.538Z,1513247856.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:36.844Z,1513247856.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:36.876Z,1513247856.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:37.236Z,1513247857.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:37.252Z,1513247857.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:37.638Z,1513247857.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:37.652Z,1513247857.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:38.039Z,1513247858.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:38.057Z,1513247858.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:38.466Z,1513247858.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:38.498Z,1513247858.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:38.858Z,1513247858.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:38.872Z,1513247858.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:39.258Z,1513247859.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:39.279Z,1513247859.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:39.659Z,1513247859.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:39.679Z,1513247859.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:40.031Z,1513247860.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:40.068Z,1513247860.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:40.435Z,1513247860.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:40.516Z,1513247860.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:40.832Z,1513247860.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:40.863Z,1513247860.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:41.232Z,1513247861.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:41.283Z,1513247861.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:41.650Z,1513247861.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:41.671Z,1513247861.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:42.052Z,1513247862.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:42.106Z,1513247862.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:42.450Z,1513247862.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:42.464Z,1513247862.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:42.854Z,1513247862.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:42.877Z,1513247862.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:43.231Z,1513247863.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:43.267Z,1513247863.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:43.634Z,1513247863.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:43.649Z,1513247863.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:44.027Z,1513247864.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:44.041Z,1513247864.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:44.431Z,1513247864.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:44.448Z,1513247864.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:44.849Z,1513247864.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:44.877Z,1513247864.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:45.249Z,1513247865.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:45.275Z,1513247865.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:45.650Z,1513247865.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:45.674Z,1513247865.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:46.089Z,1513247866.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:46.135Z,1513247866.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:46.431Z,1513247866.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:46.446Z,1513247866.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:46.836Z,1513247866.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:46.856Z,1513247866.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:47.239Z,1513247867.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:47.259Z,1513247867.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:47.650Z,1513247867.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:47.687Z,1513247867.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:48.049Z,1513247868.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:48.064Z,1513247868.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:48.442Z,1513247868.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:48.461Z,1513247868.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:48.836Z,1513247868.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:48.863Z,1513247868.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:49.262Z,1513247869.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:49.311Z,1513247869.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:49.650Z,1513247869.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:49.665Z,1513247869.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:50.039Z,1513247870.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:50.053Z,1513247870.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:50.445Z,1513247870.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:50.495Z,1513247870.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:50.848Z,1513247870.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:50.867Z,1513247870.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:51.258Z,1513247871.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:51.272Z,1513247871.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:51.656Z,1513247871.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:51.672Z,1513247871.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:52.031Z,1513247872.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:52.057Z,1513247872.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:52.499Z,1513247872.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:52.554Z,1513247872.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:52.896Z,1513247872.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:52.924Z,1513247872.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:53.236Z,1513247873.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:53.272Z,1513247873.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:53.664Z,1513247873.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:53.720Z,1513247873.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:54.049Z,1513247874.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:54.076Z,1513247874.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:54.448Z,1513247874.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:54.470Z,1513247874.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:54.838Z,1513247874.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:54.852Z,1513247874.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:55.240Z,1513247875.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:55.275Z,1513247875.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:55.635Z,1513247875.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:55.650Z,1513247875.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:56.039Z,1513247876.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:56.054Z,1513247876.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:56.441Z,1513247876.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:56.456Z,1513247876.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:56.853Z,1513247876.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:56.884Z,1513247876.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:57.249Z,1513247877.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:57.263Z,1513247877.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:57.650Z,1513247877.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:57.664Z,1513247877.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:58.038Z,1513247878.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:58.057Z,1513247878.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:58.441Z,1513247878.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:58.456Z,1513247878.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:58.862Z,1513247878.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:58.900Z,1513247878.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:59.240Z,1513247879.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:59.259Z,1513247879.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:37:59.650Z,1513247879.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:37:59.671Z,1513247879.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:00.049Z,1513247880.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:00.064Z,1513247880.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:00.449Z,1513247880.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:00.464Z,1513247880.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:00.848Z,1513247880.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:00.864Z,1513247880.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:01.239Z,1513247881.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:01.254Z,1513247881.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:01.640Z,1513247881.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:01.655Z,1513247881.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:02.083Z,1513247882.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:02.167Z,1513247882.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:02.432Z,1513247882.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:02.491Z,1513247882.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:02.841Z,1513247882.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:02.875Z,1513247882.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:03.254Z,1513247883.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:03.296Z,1513247883.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:03.655Z,1513247883.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:03.670Z,1513247883.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:04.032Z,1513247884.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:04.079Z,1513247884.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:04.433Z,1513247884.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:04.471Z,1513247884.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:04.919Z,1513247884.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:04.934Z,1513247884.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:05.235Z,1513247885.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:05.299Z,1513247885.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:05.645Z,1513247885.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:05.672Z,1513247885.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:06.049Z,1513247886.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:06.083Z,1513247886.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:06.479Z,1513247886.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:06.498Z,1513247886.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:06.839Z,1513247886.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:06.855Z,1513247886.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:07.239Z,1513247887.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:07.260Z,1513247887.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:07.640Z,1513247887.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:07.655Z,1513247887.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:08.043Z,1513247888.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:08.057Z,1513247888.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:08.473Z,1513247888.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:08.496Z,1513247888.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:08.843Z,1513247888.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:08.858Z,1513247888.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:09.247Z,1513247889.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:09.261Z,1513247889.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:09.654Z,1513247889.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:09.688Z,1513247889.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:10.042Z,1513247890.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:10.057Z,1513247890.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:10.441Z,1513247890.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:10.456Z,1513247890.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:10.840Z,1513247890.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:10.883Z,1513247890.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:11.242Z,1513247891.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:11.257Z,1513247891.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:11.691Z,1513247891.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:11.742Z,1513247891.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:12.042Z,1513247892.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:12.057Z,1513247892.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:12.443Z,1513247892.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:12.494Z,1513247892.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:12.836Z,1513247892.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:12.864Z,1513247892.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:13.243Z,1513247893.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:13.259Z,1513247893.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:13.644Z,1513247893.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:13.660Z,1513247893.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:14.040Z,1513247894.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:14.055Z,1513247894.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:14.439Z,1513247894.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:14.454Z,1513247894.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:14.899Z,1513247894.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:14.938Z,1513247894.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:15.249Z,1513247895.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:15.264Z,1513247895.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:15.650Z,1513247895.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:15.664Z,1513247895.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:16.041Z,1513247896.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:16.056Z,1513247896.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:16.440Z,1513247896.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:16.456Z,1513247896.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:16.838Z,1513247896.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:16.853Z,1513247896.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:17.236Z,1513247897.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:17.292Z,1513247897.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:17.674Z,1513247897.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:17.696Z,1513247897.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:18.053Z,1513247898.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:18.076Z,1513247898.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:18.465Z,1513247898.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:18.480Z,1513247898.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:18.831Z,1513247898.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:18.855Z,1513247898.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:19.231Z,1513247899.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:19.267Z,1513247899.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:19.635Z,1513247899.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:19.666Z,1513247899.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:20.032Z,1513247900.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:20.067Z,1513247900.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:20.470Z,1513247900.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:20.513Z,1513247900.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:20.856Z,1513247900.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:20.875Z,1513247900.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:21.256Z,1513247901.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:21.307Z,1513247901.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:21.642Z,1513247901.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:21.664Z,1513247901.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:22.035Z,1513247902.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:22.059Z,1513247902.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:22.435Z,1513247902.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:22.477Z,1513247902.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:22.833Z,1513247902.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:22.871Z,1513247902.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:23.248Z,1513247903.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:23.277Z,1513247903.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:23.649Z,1513247903.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:23.681Z,1513247903.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:24.054Z,1513247904.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:24.088Z,1513247904.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:24.472Z,1513247904.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:24.487Z,1513247904.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:27.923Z,1513247907.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:27.989Z,1513247907.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:28.079Z,1513247908.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:28.125Z,1513247908.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:28.451Z,1513247908.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:28.499Z,1513247908.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:28.865Z,1513247908.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:28.886Z,1513247908.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:29.254Z,1513247909.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:29.307Z,1513247909.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:29.639Z,1513247909.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:29.653Z,1513247909.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:30.035Z,1513247910.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:30.049Z,1513247910.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:30.436Z,1513247910.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:30.459Z,1513247910.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:30.852Z,1513247910.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:30.886Z,1513247910.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:31.257Z,1513247911.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:31.286Z,1513247911.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:31.658Z,1513247911.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:31.687Z,1513247911.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:32.043Z,1513247912.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:32.057Z,1513247912.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:32.442Z,1513247912.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:32.457Z,1513247912.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:32.842Z,1513247912.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:32.867Z,1513247912.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:33.238Z,1513247913.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:33.257Z,1513247913.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:33.649Z,1513247913.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:33.664Z,1513247913.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:34.052Z,1513247914.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:34.088Z,1513247914.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:34.490Z,1513247914.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:34.506Z,1513247914.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:34.846Z,1513247914.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:34.867Z,1513247914.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:35.247Z,1513247915.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:35.267Z,1513247915.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:35.643Z,1513247915.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:35.658Z,1513247915.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:36.042Z,1513247916.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:36.056Z,1513247916.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:36.444Z,1513247916.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:36.458Z,1513247916.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:36.849Z,1513247916.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:36.864Z,1513247916.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:37.299Z,1513247917.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:37.352Z,1513247917.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:37.648Z,1513247917.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:37.664Z,1513247917.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:38.043Z,1513247918.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:38.058Z,1513247918.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:38.447Z,1513247918.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:38.462Z,1513247918.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:38.844Z,1513247918.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:38.859Z,1513247918.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:39.246Z,1513247919.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:39.261Z,1513247919.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:39.650Z,1513247919.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:39.665Z,1513247919.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:40.055Z,1513247920.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:40.069Z,1513247920.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:40.471Z,1513247920.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:40.501Z,1513247920.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:40.838Z,1513247920.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:40.871Z,1513247920.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:41.248Z,1513247921.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:41.263Z,1513247921.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:41.636Z,1513247921.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:41.672Z,1513247921.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:42.034Z,1513247922.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:42.060Z,1513247922.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:42.447Z,1513247922.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:42.467Z,1513247922.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:42.845Z,1513247922.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:42.860Z,1513247922.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:43.249Z,1513247923.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:43.263Z,1513247923.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:43.690Z,1513247923.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:43.711Z,1513247923.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:44.049Z,1513247924.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:44.064Z,1513247924.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:44.446Z,1513247924.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:44.461Z,1513247924.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:44.843Z,1513247924.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:44.863Z,1513247924.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:45.247Z,1513247925.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:45.262Z,1513247925.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:45.654Z,1513247925.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:45.669Z,1513247925.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:46.054Z,1513247926.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:46.075Z,1513247926.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:46.465Z,1513247926.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:46.480Z,1513247926.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:46.858Z,1513247926.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:46.889Z,1513247926.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:47.236Z,1513247927.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:47.265Z,1513247927.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:47.635Z,1513247927.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:47.660Z,1513247927.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:48.036Z,1513247928.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:48.079Z,1513247928.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:48.472Z,1513247928.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:48.513Z,1513247928.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:48.854Z,1513247928.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:48.885Z,1513247928.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:49.250Z,1513247929.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:49.312Z,1513247929.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:49.651Z,1513247929.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:49.677Z,1513247929.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:50.073Z,1513247930.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:50.096Z,1513247930.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:50.436Z,1513247930.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:50.502Z,1513247930.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:50.502Z,1513247930.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202
2017-12-14T10:38:50.502Z,1513247930.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:38:50.503Z,1513247930.503 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:50.504Z,1513247930.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 202
2017-12-14T10:38:50.504Z,1513247930.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:38:50.506Z,1513247930.506 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:50.506Z,1513247930.506 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202
2017-12-14T10:38:50.506Z,1513247930.506 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:38:50.517Z,1513247930.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:38:50.517Z,1513247930.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:38:50.518Z,1513247930.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:38:50.836Z,1513247930.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:50.883Z,1513247930.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:38:50.883Z,1513247930.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202
2017-12-14T10:38:50.883Z,1513247930.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:38:50.883Z,1513247930.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 202
2017-12-14T10:38:50.884Z,1513247930.884 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:38:50.884Z,1513247930.884 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202
2017-12-14T10:38:51.243Z,1513247931.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:51.309Z,1513247931.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:38:51.310Z,1513247931.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:38:51.310Z,1513247931.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:38:51.310Z,1513247931.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:38:51.311Z,1513247931.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:38:51.311Z,1513247931.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:38:51.311Z,1513247931.311 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:38:51.312Z,1513247931.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:38:51.312Z,1513247931.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:38:51.655Z,1513247931.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:51.680Z,1513247931.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:52.046Z,1513247932.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:52.081Z,1513247932.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:52.458Z,1513247932.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:52.475Z,1513247932.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:52.835Z,1513247932.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:52.872Z,1513247932.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:53.237Z,1513247933.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:53.277Z,1513247933.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:53.642Z,1513247933.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:53.656Z,1513247933.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:54.041Z,1513247934.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:54.055Z,1513247934.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:54.439Z,1513247934.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:54.460Z,1513247934.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:54.853Z,1513247934.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:54.868Z,1513247934.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:55.259Z,1513247935.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:55.273Z,1513247935.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:55.658Z,1513247935.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:55.673Z,1513247935.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:56.036Z,1513247936.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:56.071Z,1513247936.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:56.477Z,1513247936.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:56.519Z,1513247936.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:56.836Z,1513247936.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:56.867Z,1513247936.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:57.239Z,1513247937.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:57.270Z,1513247937.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:57.659Z,1513247937.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:57.673Z,1513247937.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:58.045Z,1513247938.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:58.083Z,1513247938.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:58.472Z,1513247938.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:58.491Z,1513247938.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:58.852Z,1513247938.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:58.878Z,1513247938.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:59.241Z,1513247939.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:59.273Z,1513247939.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:38:59.679Z,1513247939.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:38:59.739Z,1513247939.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:00.039Z,1513247940.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:00.054Z,1513247940.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:00.439Z,1513247940.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:00.459Z,1513247940.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:00.902Z,1513247940.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:00.932Z,1513247940.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:01.254Z,1513247941.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:01.286Z,1513247941.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:01.653Z,1513247941.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:01.685Z,1513247941.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:02.039Z,1513247942.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:02.059Z,1513247942.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:02.485Z,1513247942.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:02.500Z,1513247942.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:02.870Z,1513247942.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:02.897Z,1513247942.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:03.240Z,1513247943.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:03.266Z,1513247943.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:03.660Z,1513247943.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:03.675Z,1513247943.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:04.051Z,1513247944.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:04.075Z,1513247944.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:04.458Z,1513247944.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:04.473Z,1513247944.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:04.835Z,1513247944.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:04.871Z,1513247944.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:05.235Z,1513247945.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:05.270Z,1513247945.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:05.642Z,1513247945.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:05.671Z,1513247945.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:06.074Z,1513247946.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:06.103Z,1513247946.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:06.442Z,1513247946.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:06.458Z,1513247946.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:06.858Z,1513247946.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:06.887Z,1513247946.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:07.258Z,1513247947.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:07.293Z,1513247947.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:07.654Z,1513247947.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:07.680Z,1513247947.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:08.044Z,1513247948.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:08.060Z,1513247948.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:08.439Z,1513247948.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:08.455Z,1513247948.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:08.840Z,1513247948.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:08.855Z,1513247948.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:09.280Z,1513247949.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:09.308Z,1513247949.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:09.649Z,1513247949.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:09.671Z,1513247949.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:10.050Z,1513247950.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:10.065Z,1513247950.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:10.458Z,1513247950.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:10.511Z,1513247950.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:10.849Z,1513247950.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:10.864Z,1513247950.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:11.248Z,1513247951.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:11.264Z,1513247951.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:11.649Z,1513247951.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:11.714Z,1513247951.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:12.049Z,1513247952.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:12.064Z,1513247952.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:12.450Z,1513247952.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:12.479Z,1513247952.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:12.871Z,1513247952.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:12.927Z,1513247952.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:13.253Z,1513247953.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:13.275Z,1513247953.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:13.289Z,1513247953.289 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:39:13.653Z,1513247953.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:13.717Z,1513247953.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:14.044Z,1513247954.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:14.077Z,1513247954.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:14.442Z,1513247954.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:14.469Z,1513247954.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:14.844Z,1513247954.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:14.883Z,1513247954.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:15.239Z,1513247955.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:15.254Z,1513247955.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:15.657Z,1513247955.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:15.716Z,1513247955.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:16.057Z,1513247956.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:16.079Z,1513247956.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:16.476Z,1513247956.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:16.514Z,1513247956.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:16.848Z,1513247956.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:16.864Z,1513247956.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:17.240Z,1513247957.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:17.267Z,1513247957.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:17.647Z,1513247957.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:17.662Z,1513247957.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:18.047Z,1513247958.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:18.062Z,1513247958.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:18.432Z,1513247958.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:18.472Z,1513247958.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:18.866Z,1513247958.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:18.899Z,1513247958.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:19.258Z,1513247959.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:19.279Z,1513247959.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:19.658Z,1513247959.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:19.672Z,1513247959.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:20.035Z,1513247960.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:20.071Z,1513247960.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:20.436Z,1513247960.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:20.467Z,1513247960.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:20.837Z,1513247960.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:20.872Z,1513247960.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:21.235Z,1513247961.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:21.275Z,1513247961.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:21.658Z,1513247961.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:21.673Z,1513247961.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:22.059Z,1513247962.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:22.123Z,1513247962.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:22.454Z,1513247962.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:22.475Z,1513247962.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:22.859Z,1513247962.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:22.874Z,1513247962.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:23.236Z,1513247963.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:23.272Z,1513247963.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:23.276Z,1513247963.276 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T10:39:23.276Z,1513247963.276 [Default:CheckIn:C.Wait] Stopped
2017-12-14T10:39:23.276Z,1513247963.276 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T10:39:23.276Z,1513247963.276 [Default:CheckIn:D] Running Loop=1
2017-12-14T10:39:23.636Z,1513247963.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:23.668Z,1513247963.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:23.671Z,1513247963.671 [Default:CheckIn:D] Stopped
2017-12-14T10:39:23.671Z,1513247963.671 [Default:CheckIn:E] Running Loop=1
2017-12-14T10:39:24.036Z,1513247964.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:24.071Z,1513247964.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:24.074Z,1513247964.074 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 606.138021 min 
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn:E] Stopped
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn] Stopped
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn](INFO): Running loop #59
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn] Running Loop=59
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T10:39:24.075Z,1513247964.075 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T10:39:24.435Z,1513247964.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:24.471Z,1513247964.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:24.869Z,1513247964.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:24.884Z,1513247964.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:28.238Z,1513247968.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:28.271Z,1513247968.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:28.444Z,1513247968.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:28.459Z,1513247968.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:28.743Z,1513247968.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:28.771Z,1513247968.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:29.137Z,1513247969.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:29.159Z,1513247969.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:29.528Z,1513247969.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:29.556Z,1513247969.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:29.948Z,1513247969.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:29.963Z,1513247969.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:30.340Z,1513247970.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:30.356Z,1513247970.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:30.767Z,1513247970.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:30.782Z,1513247970.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:31.141Z,1513247971.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:31.178Z,1513247971.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:31.541Z,1513247971.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:31.575Z,1513247971.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:31.943Z,1513247971.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:31.975Z,1513247971.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:32.336Z,1513247972.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:32.372Z,1513247972.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:32.770Z,1513247972.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:32.835Z,1513247972.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:33.136Z,1513247973.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:33.172Z,1513247973.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:33.546Z,1513247973.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:33.568Z,1513247973.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:33.946Z,1513247973.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:33.971Z,1513247973.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:34.342Z,1513247974.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:34.399Z,1513247974.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:34.808Z,1513247974.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:34.835Z,1513247974.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:35.136Z,1513247975.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:35.198Z,1513247975.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:35.548Z,1513247975.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:35.563Z,1513247975.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:35.950Z,1513247975.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:35.999Z,1513247975.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:36.391Z,1513247976.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:36.427Z,1513247976.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:36.733Z,1513247976.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:36.752Z,1513247976.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:37.131Z,1513247977.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:37.153Z,1513247977.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:37.536Z,1513247977.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:37.551Z,1513247977.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:37.942Z,1513247977.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:37.957Z,1513247977.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:38.377Z,1513247978.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:38.434Z,1513247978.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:38.750Z,1513247978.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:38.785Z,1513247978.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:39.151Z,1513247979.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:39.175Z,1513247979.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:39.542Z,1513247979.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:39.580Z,1513247979.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:39.937Z,1513247979.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:39.952Z,1513247979.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:40.351Z,1513247980.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:40.416Z,1513247980.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:40.732Z,1513247980.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:40.765Z,1513247980.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:41.156Z,1513247981.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:41.203Z,1513247981.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:41.547Z,1513247981.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:41.562Z,1513247981.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:41.954Z,1513247981.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:41.979Z,1513247981.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:42.381Z,1513247982.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:42.433Z,1513247982.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:42.737Z,1513247982.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:42.764Z,1513247982.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:43.140Z,1513247983.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:43.163Z,1513247983.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:43.546Z,1513247983.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:43.561Z,1513247983.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:43.941Z,1513247983.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:43.960Z,1513247983.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:44.416Z,1513247984.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:44.515Z,1513247984.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:44.727Z,1513247984.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:44.756Z,1513247984.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:45.127Z,1513247985.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:45.159Z,1513247985.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:45.531Z,1513247985.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:45.563Z,1513247985.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:45.929Z,1513247985.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:45.957Z,1513247985.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:46.331Z,1513247986.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:46.367Z,1513247986.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:46.779Z,1513247986.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:46.824Z,1513247986.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:47.155Z,1513247987.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:47.170Z,1513247987.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:47.534Z,1513247987.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:47.643Z,1513247987.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:47.942Z,1513247987.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:47.958Z,1513247987.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:48.342Z,1513247988.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:48.357Z,1513247988.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:48.792Z,1513247988.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:48.823Z,1513247988.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:49.131Z,1513247989.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:49.164Z,1513247989.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:49.552Z,1513247989.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:49.567Z,1513247989.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:49.937Z,1513247989.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:49.971Z,1513247989.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:50.377Z,1513247990.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:50.428Z,1513247990.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:50.729Z,1513247990.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:50.744Z,1513247990.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:51.136Z,1513247991.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:51.152Z,1513247991.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:51.550Z,1513247991.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:51.584Z,1513247991.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:51.951Z,1513247991.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:51.978Z,1513247991.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:52.385Z,1513247992.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:52.416Z,1513247992.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:52.740Z,1513247992.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:52.780Z,1513247992.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:53.141Z,1513247993.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:53.170Z,1513247993.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:53.540Z,1513247993.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:53.573Z,1513247993.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:53.957Z,1513247993.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:53.992Z,1513247993.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:54.417Z,1513247994.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:54.447Z,1513247994.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:54.734Z,1513247994.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:54.794Z,1513247994.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:55.134Z,1513247995.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:55.151Z,1513247995.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:55.537Z,1513247995.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:55.553Z,1513247995.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:55.939Z,1513247995.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:55.955Z,1513247995.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:56.397Z,1513247996.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:56.459Z,1513247996.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:56.745Z,1513247996.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:56.761Z,1513247996.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:57.159Z,1513247997.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:57.211Z,1513247997.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:57.539Z,1513247997.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:57.554Z,1513247997.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:57.938Z,1513247997.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:57.995Z,1513247997.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:58.337Z,1513247998.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:58.354Z,1513247998.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:58.734Z,1513247998.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:58.778Z,1513247998.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:59.142Z,1513247999.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:59.157Z,1513247999.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:59.539Z,1513247999.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:59.571Z,1513247999.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:39:59.955Z,1513247999.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:39:59.970Z,1513247999.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:00.353Z,1513248000.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:00.367Z,1513248000.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:00.757Z,1513248000.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:00.803Z,1513248000.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:01.131Z,1513248001.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:01.159Z,1513248001.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:01.551Z,1513248001.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:01.566Z,1513248001.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:01.946Z,1513248001.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:01.965Z,1513248001.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:02.350Z,1513248002.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:02.366Z,1513248002.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:02.775Z,1513248002.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:02.810Z,1513248002.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:03.127Z,1513248003.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:03.167Z,1513248003.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:03.552Z,1513248003.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:03.591Z,1513248003.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:03.941Z,1513248003.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:03.968Z,1513248003.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:04.376Z,1513248004.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:04.420Z,1513248004.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:04.733Z,1513248004.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:04.748Z,1513248004.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:05.140Z,1513248005.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:05.186Z,1513248005.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:05.533Z,1513248005.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:05.552Z,1513248005.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:05.946Z,1513248005.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:05.960Z,1513248005.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:06.391Z,1513248006.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:06.439Z,1513248006.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:06.746Z,1513248006.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:06.776Z,1513248006.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:07.134Z,1513248007.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:07.162Z,1513248007.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:07.527Z,1513248007.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:07.555Z,1513248007.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:07.932Z,1513248007.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:07.970Z,1513248007.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:08.341Z,1513248008.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:08.424Z,1513248008.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:08.766Z,1513248008.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:08.794Z,1513248008.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:09.146Z,1513248009.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:09.161Z,1513248009.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:09.541Z,1513248009.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:09.561Z,1513248009.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:09.975Z,1513248009.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:09.998Z,1513248009.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:10.343Z,1513248010.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:10.415Z,1513248010.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:10.727Z,1513248010.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:10.747Z,1513248010.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:11.135Z,1513248011.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:11.150Z,1513248011.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:11.542Z,1513248011.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:11.575Z,1513248011.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:11.946Z,1513248011.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:11.977Z,1513248011.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:12.347Z,1513248012.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:12.408Z,1513248012.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:12.724Z,1513248012.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:12.763Z,1513248012.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:13.168Z,1513248013.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:13.207Z,1513248013.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:13.541Z,1513248013.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:13.565Z,1513248013.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:13.942Z,1513248013.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:13.976Z,1513248013.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:14.342Z,1513248014.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:14.380Z,1513248014.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:14.776Z,1513248014.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:14.808Z,1513248014.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:15.132Z,1513248015.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:15.148Z,1513248015.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:15.541Z,1513248015.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:15.569Z,1513248015.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:15.946Z,1513248015.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:15.981Z,1513248015.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:16.392Z,1513248016.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:16.429Z,1513248016.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:16.758Z,1513248016.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:16.835Z,1513248016.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:17.142Z,1513248017.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:17.210Z,1513248017.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:17.525Z,1513248017.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:17.552Z,1513248017.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:17.939Z,1513248017.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:17.954Z,1513248017.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:18.357Z,1513248018.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:18.436Z,1513248018.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:18.742Z,1513248018.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:18.777Z,1513248018.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:19.159Z,1513248019.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:19.176Z,1513248019.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:19.560Z,1513248019.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:19.579Z,1513248019.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:19.927Z,1513248019.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:19.964Z,1513248019.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:20.375Z,1513248020.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:20.433Z,1513248020.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:20.742Z,1513248020.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:20.909Z,1513248020.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:21.128Z,1513248021.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:21.149Z,1513248021.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:21.546Z,1513248021.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:21.554Z,1513248021.554 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:40:21.554Z,1513248021.554 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:40:21.554Z,1513248021.554 [BPC1](ERROR): Communications Fault
2017-12-14T10:40:21.574Z,1513248021.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:21.598Z,1513248021.598 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:40:21.942Z,1513248021.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:21.957Z,1513248021.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:22.355Z,1513248022.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:22.421Z,1513248022.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:22.740Z,1513248022.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:22.755Z,1513248022.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:22.786Z,1513248022.786 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:40:22.787Z,1513248022.787 [BPC1] No Fault, FailCount= 1
2017-12-14T10:40:23.137Z,1513248023.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:23.195Z,1513248023.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:23.544Z,1513248023.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:23.561Z,1513248023.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:23.944Z,1513248023.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:23.959Z,1513248023.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:24.380Z,1513248024.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:24.428Z,1513248024.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:24.732Z,1513248024.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:24.771Z,1513248024.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:25.136Z,1513248025.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:25.171Z,1513248025.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:28.830Z,1513248028.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:28.846Z,1513248028.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:28.962Z,1513248028.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:28.995Z,1513248028.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:29.330Z,1513248029.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:29.344Z,1513248029.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:29.730Z,1513248029.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:29.745Z,1513248029.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:30.122Z,1513248030.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:30.137Z,1513248030.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:30.529Z,1513248030.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:30.547Z,1513248030.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:30.946Z,1513248030.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:30.976Z,1513248030.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:31.325Z,1513248031.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:31.378Z,1513248031.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:31.734Z,1513248031.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:31.749Z,1513248031.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:32.115Z,1513248032.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:32.155Z,1513248032.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:32.543Z,1513248032.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:32.558Z,1513248032.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:32.930Z,1513248032.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:32.957Z,1513248032.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:33.330Z,1513248033.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:33.363Z,1513248033.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:33.725Z,1513248033.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:33.757Z,1513248033.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:34.119Z,1513248034.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:34.155Z,1513248034.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:34.547Z,1513248034.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:34.562Z,1513248034.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:34.943Z,1513248034.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:34.963Z,1513248034.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:35.327Z,1513248035.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:35.353Z,1513248035.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:35.728Z,1513248035.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:35.756Z,1513248035.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:36.112Z,1513248036.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:36.155Z,1513248036.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:36.555Z,1513248036.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:36.571Z,1513248036.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:36.934Z,1513248036.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:36.967Z,1513248036.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:37.334Z,1513248037.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:37.404Z,1513248037.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:37.721Z,1513248037.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:37.736Z,1513248037.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:38.123Z,1513248038.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:38.139Z,1513248038.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:38.574Z,1513248038.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:38.614Z,1513248038.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:38.938Z,1513248038.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:38.967Z,1513248038.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:39.337Z,1513248039.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:39.367Z,1513248039.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:39.724Z,1513248039.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:39.739Z,1513248039.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:40.127Z,1513248040.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:40.143Z,1513248040.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:40.534Z,1513248040.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:40.571Z,1513248040.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:40.933Z,1513248040.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:40.961Z,1513248040.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:41.337Z,1513248041.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:41.352Z,1513248041.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:41.729Z,1513248041.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:41.776Z,1513248041.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:42.125Z,1513248042.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:42.186Z,1513248042.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:42.533Z,1513248042.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:42.555Z,1513248042.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:42.933Z,1513248042.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:42.949Z,1513248042.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:43.332Z,1513248043.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:43.356Z,1513248043.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:43.724Z,1513248043.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:43.739Z,1513248043.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:44.125Z,1513248044.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:44.175Z,1513248044.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:44.533Z,1513248044.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:44.548Z,1513248044.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:44.936Z,1513248044.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:44.991Z,1513248044.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:45.338Z,1513248045.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:45.359Z,1513248045.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:45.722Z,1513248045.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:45.737Z,1513248045.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:46.123Z,1513248046.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:46.143Z,1513248046.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:46.535Z,1513248046.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:46.549Z,1513248046.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:46.937Z,1513248046.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:46.952Z,1513248046.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:47.342Z,1513248047.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:47.356Z,1513248047.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:47.728Z,1513248047.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:47.743Z,1513248047.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:48.131Z,1513248048.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:48.175Z,1513248048.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:48.534Z,1513248048.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:48.549Z,1513248048.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:48.939Z,1513248048.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:48.954Z,1513248048.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:49.335Z,1513248049.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:49.350Z,1513248049.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:49.730Z,1513248049.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:49.745Z,1513248049.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:50.116Z,1513248050.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:50.143Z,1513248050.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:50.534Z,1513248050.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:50.550Z,1513248050.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:50.937Z,1513248050.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:50.952Z,1513248050.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:51.344Z,1513248051.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:51.363Z,1513248051.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:51.716Z,1513248051.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:51.747Z,1513248051.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:52.115Z,1513248052.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:52.159Z,1513248052.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:52.530Z,1513248052.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:52.553Z,1513248052.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:52.934Z,1513248052.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:52.971Z,1513248052.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:53.334Z,1513248053.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:53.380Z,1513248053.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:53.722Z,1513248053.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:53.737Z,1513248053.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:54.121Z,1513248054.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:54.136Z,1513248054.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:54.568Z,1513248054.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:54.592Z,1513248054.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:54.946Z,1513248054.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:54.972Z,1513248054.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:55.338Z,1513248055.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:55.370Z,1513248055.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:55.726Z,1513248055.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:55.747Z,1513248055.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:56.124Z,1513248056.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:56.138Z,1513248056.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:56.527Z,1513248056.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:56.542Z,1513248056.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:56.930Z,1513248056.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:56.946Z,1513248056.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:57.338Z,1513248057.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:57.352Z,1513248057.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:57.748Z,1513248057.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:57.780Z,1513248057.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:58.124Z,1513248058.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:58.144Z,1513248058.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:58.530Z,1513248058.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:58.546Z,1513248058.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:58.930Z,1513248058.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:58.946Z,1513248058.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:59.329Z,1513248059.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:59.352Z,1513248059.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:40:59.728Z,1513248059.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:40:59.743Z,1513248059.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:00.122Z,1513248060.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:00.142Z,1513248060.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:00.528Z,1513248060.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:00.543Z,1513248060.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:00.949Z,1513248060.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:00.995Z,1513248060.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:01.333Z,1513248061.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:01.348Z,1513248061.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:01.727Z,1513248061.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:01.743Z,1513248061.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:02.122Z,1513248062.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:02.150Z,1513248062.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:02.533Z,1513248062.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:02.548Z,1513248062.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:02.938Z,1513248062.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:02.952Z,1513248062.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:03.334Z,1513248063.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:03.348Z,1513248063.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:03.728Z,1513248063.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:03.744Z,1513248063.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:04.133Z,1513248064.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:04.208Z,1513248064.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:04.537Z,1513248064.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:04.552Z,1513248064.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:04.938Z,1513248064.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:04.952Z,1513248064.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:05.337Z,1513248065.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:05.431Z,1513248065.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:05.730Z,1513248065.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:05.745Z,1513248065.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:06.123Z,1513248066.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:06.180Z,1513248066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:06.537Z,1513248066.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:06.560Z,1513248066.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:06.937Z,1513248066.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:06.990Z,1513248066.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:07.338Z,1513248067.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:07.359Z,1513248067.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:07.716Z,1513248067.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:07.751Z,1513248067.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:08.119Z,1513248068.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:08.147Z,1513248068.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:08.534Z,1513248068.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:08.550Z,1513248068.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:08.936Z,1513248068.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:08.951Z,1513248068.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:09.332Z,1513248069.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:09.365Z,1513248069.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:09.720Z,1513248069.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:09.746Z,1513248069.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:10.116Z,1513248070.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:10.147Z,1513248070.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:10.544Z,1513248070.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:10.571Z,1513248070.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:10.929Z,1513248070.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:10.953Z,1513248070.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:11.324Z,1513248071.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:11.360Z,1513248071.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:11.720Z,1513248071.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:11.734Z,1513248071.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:12.117Z,1513248072.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:12.139Z,1513248072.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:12.533Z,1513248072.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:12.567Z,1513248072.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:12.938Z,1513248072.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:12.964Z,1513248072.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:13.334Z,1513248073.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:13.372Z,1513248073.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:13.726Z,1513248073.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:13.740Z,1513248073.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:14.139Z,1513248074.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:14.170Z,1513248074.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:14.535Z,1513248074.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:14.568Z,1513248074.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:14.933Z,1513248074.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:14.968Z,1513248074.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:15.333Z,1513248075.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:15.387Z,1513248075.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:15.722Z,1513248075.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:15.737Z,1513248075.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:16.122Z,1513248076.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:16.136Z,1513248076.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:16.537Z,1513248076.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:16.572Z,1513248076.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:16.944Z,1513248076.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:16.972Z,1513248076.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:17.327Z,1513248077.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:17.383Z,1513248077.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:17.732Z,1513248077.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:17.747Z,1513248077.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:18.122Z,1513248078.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:18.153Z,1513248078.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:18.551Z,1513248078.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:18.570Z,1513248078.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:18.942Z,1513248078.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:18.967Z,1513248078.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:19.340Z,1513248079.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:19.368Z,1513248079.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:19.719Z,1513248079.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:19.771Z,1513248079.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:20.152Z,1513248080.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:20.194Z,1513248080.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:20.532Z,1513248080.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:20.551Z,1513248080.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:20.939Z,1513248080.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:20.983Z,1513248080.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:21.341Z,1513248081.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:21.389Z,1513248081.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:21.723Z,1513248081.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:21.759Z,1513248081.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:22.116Z,1513248082.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:22.174Z,1513248082.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:22.555Z,1513248082.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:22.604Z,1513248082.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:22.961Z,1513248082.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:23.007Z,1513248083.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:23.327Z,1513248083.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:23.402Z,1513248083.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:23.746Z,1513248083.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:23.795Z,1513248083.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:24.123Z,1513248084.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:24.147Z,1513248084.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:24.534Z,1513248084.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:24.584Z,1513248084.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:24.937Z,1513248084.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:24.952Z,1513248084.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:25.344Z,1513248085.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:25.367Z,1513248085.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:30.417Z,1513248090.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:30.504Z,1513248090.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:30.609Z,1513248090.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:30.655Z,1513248090.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:31.017Z,1513248091.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:31.040Z,1513248091.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:31.424Z,1513248091.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:31.489Z,1513248091.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:31.808Z,1513248091.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:31.850Z,1513248091.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:32.200Z,1513248092.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:32.262Z,1513248092.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:32.613Z,1513248092.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:32.675Z,1513248092.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:33.006Z,1513248093.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:33.071Z,1513248093.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:33.406Z,1513248093.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:33.434Z,1513248093.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:33.816Z,1513248093.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:33.877Z,1513248093.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:34.215Z,1513248094.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:34.275Z,1513248094.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:34.614Z,1513248094.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:34.659Z,1513248094.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:35.029Z,1513248095.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:35.101Z,1513248095.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:35.402Z,1513248095.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:35.449Z,1513248095.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:35.814Z,1513248095.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:35.851Z,1513248095.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:36.201Z,1513248096.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:36.259Z,1513248096.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:36.605Z,1513248096.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:36.620Z,1513248096.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:37.012Z,1513248097.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:37.031Z,1513248097.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:37.410Z,1513248097.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:37.462Z,1513248097.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:37.808Z,1513248097.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:37.839Z,1513248097.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:38.201Z,1513248098.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:38.234Z,1513248098.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:38.596Z,1513248098.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:38.644Z,1513248098.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:38.998Z,1513248098.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:39.047Z,1513248099.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:39.401Z,1513248099.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:39.440Z,1513248099.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:39.814Z,1513248099.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:39.888Z,1513248099.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:40.212Z,1513248100.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:40.250Z,1513248100.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:40.642Z,1513248100.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:40.766Z,1513248100.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:41.002Z,1513248101.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:41.066Z,1513248101.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:41.406Z,1513248101.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:41.455Z,1513248101.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:41.807Z,1513248101.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:41.830Z,1513248101.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:42.225Z,1513248102.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:42.273Z,1513248102.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:42.614Z,1513248102.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:42.653Z,1513248102.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:43.031Z,1513248103.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:43.075Z,1513248103.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:43.420Z,1513248103.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:43.470Z,1513248103.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:43.806Z,1513248103.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:43.824Z,1513248103.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:44.203Z,1513248104.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:44.259Z,1513248104.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:44.607Z,1513248104.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:44.679Z,1513248104.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:45.008Z,1513248105.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:45.027Z,1513248105.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:45.403Z,1513248105.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:45.424Z,1513248105.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:45.816Z,1513248105.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:45.831Z,1513248105.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:46.212Z,1513248106.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:46.230Z,1513248106.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:46.614Z,1513248106.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:46.635Z,1513248106.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:46.997Z,1513248106.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:47.024Z,1513248107.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:47.392Z,1513248107.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:47.408Z,1513248107.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:47.795Z,1513248107.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:47.839Z,1513248107.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:48.195Z,1513248108.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:48.240Z,1513248108.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:48.606Z,1513248108.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:48.633Z,1513248108.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:49.010Z,1513248109.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:49.042Z,1513248109.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:49.409Z,1513248109.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:49.436Z,1513248109.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:49.795Z,1513248109.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:49.811Z,1513248109.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:50.203Z,1513248110.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:50.239Z,1513248110.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:50.611Z,1513248110.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:50.663Z,1513248110.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:51.011Z,1513248111.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:51.040Z,1513248111.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:51.403Z,1513248111.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:51.418Z,1513248111.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:51.418Z,1513248111.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203
2017-12-14T10:41:51.418Z,1513248111.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:41:51.420Z,1513248111.420 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:51.420Z,1513248111.420 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 203
2017-12-14T10:41:51.420Z,1513248111.420 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:41:51.434Z,1513248111.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:51.434Z,1513248111.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203
2017-12-14T10:41:51.434Z,1513248111.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:41:51.454Z,1513248111.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:41:51.454Z,1513248111.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:41:51.455Z,1513248111.455 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:41:51.816Z,1513248111.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:51.894Z,1513248111.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:41:51.894Z,1513248111.894 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203
2017-12-14T10:41:51.894Z,1513248111.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:41:51.894Z,1513248111.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 203
2017-12-14T10:41:51.895Z,1513248111.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:41:51.895Z,1513248111.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203
2017-12-14T10:41:52.211Z,1513248112.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:52.224Z,1513248112.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:41:52.225Z,1513248112.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:41:52.225Z,1513248112.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:41:52.225Z,1513248112.225 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:41:52.226Z,1513248112.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:41:52.226Z,1513248112.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:41:52.226Z,1513248112.226 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:41:52.227Z,1513248112.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:41:52.227Z,1513248112.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:41:52.612Z,1513248112.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:52.635Z,1513248112.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:53.002Z,1513248113.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:53.023Z,1513248113.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:53.399Z,1513248113.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:53.466Z,1513248113.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:53.843Z,1513248113.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:53.890Z,1513248113.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:54.202Z,1513248114.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:54.259Z,1513248114.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:54.616Z,1513248114.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:54.632Z,1513248114.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:55.022Z,1513248115.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:55.076Z,1513248115.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:55.419Z,1513248115.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:55.439Z,1513248115.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:55.795Z,1513248115.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:55.831Z,1513248115.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:56.196Z,1513248116.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:56.231Z,1513248116.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:56.596Z,1513248116.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:56.634Z,1513248116.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:57.002Z,1513248117.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:57.047Z,1513248117.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:57.401Z,1513248117.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:57.439Z,1513248117.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:57.813Z,1513248117.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:57.837Z,1513248117.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:58.209Z,1513248118.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:58.231Z,1513248118.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:58.615Z,1513248118.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:58.635Z,1513248118.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:59.009Z,1513248119.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:59.035Z,1513248119.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:59.396Z,1513248119.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:59.427Z,1513248119.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:41:59.796Z,1513248119.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:41:59.826Z,1513248119.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:00.231Z,1513248120.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:00.245Z,1513248120.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:00.606Z,1513248120.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:00.639Z,1513248120.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:01.010Z,1513248121.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:01.039Z,1513248121.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:01.411Z,1513248121.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:01.431Z,1513248121.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:01.800Z,1513248121.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:01.816Z,1513248121.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:02.203Z,1513248122.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:02.223Z,1513248122.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:02.605Z,1513248122.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:02.627Z,1513248122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:03.002Z,1513248123.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:03.021Z,1513248123.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:03.408Z,1513248123.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:03.456Z,1513248123.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:03.810Z,1513248123.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:03.831Z,1513248123.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:04.214Z,1513248124.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:04.235Z,1513248124.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:04.605Z,1513248124.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:04.628Z,1513248124.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:04.997Z,1513248124.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:05.012Z,1513248125.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:05.396Z,1513248125.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:05.419Z,1513248125.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:05.794Z,1513248125.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:05.808Z,1513248125.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:06.198Z,1513248126.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:06.219Z,1513248126.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:06.618Z,1513248126.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:06.641Z,1513248126.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:07.009Z,1513248127.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:07.025Z,1513248127.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:07.414Z,1513248127.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:07.428Z,1513248127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:07.799Z,1513248127.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:07.819Z,1513248127.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:08.200Z,1513248128.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:08.219Z,1513248128.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:08.598Z,1513248128.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:08.619Z,1513248128.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:08.996Z,1513248128.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:09.011Z,1513248129.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:09.394Z,1513248129.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:09.409Z,1513248129.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:09.810Z,1513248129.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:09.881Z,1513248129.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:10.221Z,1513248130.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:10.236Z,1513248130.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:10.605Z,1513248130.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:10.627Z,1513248130.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:10.998Z,1513248130.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:11.013Z,1513248131.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:11.398Z,1513248131.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:11.419Z,1513248131.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:11.793Z,1513248131.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:11.816Z,1513248131.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:12.196Z,1513248132.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:12.212Z,1513248132.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:12.618Z,1513248132.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:12.634Z,1513248132.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:13.025Z,1513248133.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:13.044Z,1513248133.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:13.410Z,1513248133.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:13.425Z,1513248133.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:13.800Z,1513248133.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:13.823Z,1513248133.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:14.197Z,1513248134.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:14.231Z,1513248134.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:14.600Z,1513248134.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:14.619Z,1513248134.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:15.001Z,1513248135.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:15.016Z,1513248135.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:15.400Z,1513248135.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:15.419Z,1513248135.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:15.814Z,1513248135.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:15.859Z,1513248135.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:16.231Z,1513248136.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:16.251Z,1513248136.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:16.606Z,1513248136.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:16.651Z,1513248136.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:16.996Z,1513248136.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:17.012Z,1513248137.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:17.399Z,1513248137.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:17.458Z,1513248137.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:17.797Z,1513248137.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:17.811Z,1513248137.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:18.196Z,1513248138.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:18.211Z,1513248138.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:18.607Z,1513248138.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:18.622Z,1513248138.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:19.015Z,1513248139.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:19.032Z,1513248139.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:19.431Z,1513248139.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:19.451Z,1513248139.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:19.796Z,1513248139.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:19.815Z,1513248139.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:20.197Z,1513248140.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:20.211Z,1513248140.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:20.590Z,1513248140.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:20.631Z,1513248140.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:20.997Z,1513248140.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:21.012Z,1513248141.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:21.396Z,1513248141.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:21.412Z,1513248141.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:21.808Z,1513248141.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:21.825Z,1513248141.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:22.210Z,1513248142.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:22.232Z,1513248142.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:22.636Z,1513248142.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:22.717Z,1513248142.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:22.995Z,1513248142.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:23.015Z,1513248143.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:23.397Z,1513248143.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:23.416Z,1513248143.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:23.796Z,1513248143.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:23.823Z,1513248143.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:24.195Z,1513248144.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:24.215Z,1513248144.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:24.602Z,1513248144.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:24.627Z,1513248144.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:25.014Z,1513248145.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:25.039Z,1513248145.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:25.406Z,1513248145.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:25.434Z,1513248145.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:30.188Z,1513248150.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:30.235Z,1513248150.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:30.351Z,1513248150.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:30.427Z,1513248150.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:30.731Z,1513248150.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:30.747Z,1513248150.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:31.139Z,1513248151.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:31.156Z,1513248151.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:31.518Z,1513248151.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:31.546Z,1513248151.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:31.916Z,1513248151.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:31.944Z,1513248151.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:32.421Z,1513248152.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:32.491Z,1513248152.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:32.710Z,1513248152.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:32.747Z,1513248152.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:33.123Z,1513248153.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:33.137Z,1513248153.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:33.516Z,1513248153.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:33.551Z,1513248153.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:33.934Z,1513248153.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:33.950Z,1513248153.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:34.329Z,1513248154.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:34.346Z,1513248154.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:34.763Z,1513248154.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:34.792Z,1513248154.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:35.108Z,1513248155.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:35.139Z,1513248155.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:35.535Z,1513248155.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:35.551Z,1513248155.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:35.922Z,1513248155.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:35.960Z,1513248155.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:36.318Z,1513248156.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:36.348Z,1513248156.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:36.767Z,1513248156.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:36.789Z,1513248156.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:37.124Z,1513248157.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:37.140Z,1513248157.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:37.530Z,1513248157.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:37.551Z,1513248157.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:37.931Z,1513248157.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:37.951Z,1513248157.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:38.354Z,1513248158.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:38.423Z,1513248158.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:38.737Z,1513248158.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:38.785Z,1513248158.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:39.107Z,1513248159.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:39.144Z,1513248159.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:39.522Z,1513248159.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:39.543Z,1513248159.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:39.939Z,1513248159.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:39.997Z,1513248159.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:40.361Z,1513248160.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:40.439Z,1513248160.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:40.712Z,1513248160.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:40.720Z,1513248160.720 [BPC1](ERROR): Failed to parse message.
2017-12-14T10:42:40.720Z,1513248160.720 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T10:42:40.720Z,1513248160.720 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:42:40.724Z,1513248160.724 [BPC1](ERROR): Data Fault
2017-12-14T10:42:40.775Z,1513248160.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:40.809Z,1513248160.809 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:42:41.107Z,1513248161.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:41.151Z,1513248161.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:41.536Z,1513248161.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:41.551Z,1513248161.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:41.944Z,1513248161.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:41.972Z,1513248161.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:42.010Z,1513248162.010 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:42:42.011Z,1513248162.011 [BPC1] No Fault, FailCount= 1
2017-12-14T10:42:42.378Z,1513248162.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:42.483Z,1513248162.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:42.713Z,1513248162.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:42.730Z,1513248162.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:43.112Z,1513248163.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:43.139Z,1513248163.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:43.529Z,1513248163.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:43.567Z,1513248163.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:43.930Z,1513248163.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:43.944Z,1513248163.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:44.327Z,1513248164.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:44.407Z,1513248164.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:44.729Z,1513248164.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:44.744Z,1513248164.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:45.173Z,1513248165.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:45.230Z,1513248165.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:45.527Z,1513248165.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:45.542Z,1513248165.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:45.928Z,1513248165.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:45.944Z,1513248165.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:46.327Z,1513248166.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:46.341Z,1513248166.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:46.720Z,1513248166.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:46.755Z,1513248166.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:47.115Z,1513248167.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:47.156Z,1513248167.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:47.525Z,1513248167.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:47.552Z,1513248167.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:47.917Z,1513248167.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:47.953Z,1513248167.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:48.371Z,1513248168.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:48.410Z,1513248168.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:48.767Z,1513248168.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:48.806Z,1513248168.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:49.114Z,1513248169.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:49.129Z,1513248169.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:49.513Z,1513248169.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:49.527Z,1513248169.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:49.914Z,1513248169.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:49.929Z,1513248169.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:50.308Z,1513248170.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:50.336Z,1513248170.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:50.775Z,1513248170.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:50.827Z,1513248170.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:51.123Z,1513248171.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:51.148Z,1513248171.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:51.525Z,1513248171.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:51.676Z,1513248171.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:51.926Z,1513248171.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:51.942Z,1513248171.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:52.349Z,1513248172.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:52.392Z,1513248172.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:52.710Z,1513248172.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:52.734Z,1513248172.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:53.123Z,1513248173.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:53.144Z,1513248173.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:53.525Z,1513248173.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:53.547Z,1513248173.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:53.922Z,1513248173.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:53.938Z,1513248173.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:54.368Z,1513248174.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:54.417Z,1513248174.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:54.718Z,1513248174.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:54.735Z,1513248174.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:55.116Z,1513248175.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:55.132Z,1513248175.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:55.524Z,1513248175.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:55.540Z,1513248175.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:55.930Z,1513248175.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:56.011Z,1513248176.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:56.344Z,1513248176.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:56.408Z,1513248176.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:56.717Z,1513248176.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:56.734Z,1513248176.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:57.116Z,1513248177.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:57.131Z,1513248177.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:57.518Z,1513248177.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:57.539Z,1513248177.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:57.930Z,1513248177.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:57.968Z,1513248177.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:58.366Z,1513248178.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:58.435Z,1513248178.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:58.771Z,1513248178.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:58.835Z,1513248178.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:59.108Z,1513248179.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:59.136Z,1513248179.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:59.535Z,1513248179.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:59.552Z,1513248179.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:42:59.931Z,1513248179.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:42:59.951Z,1513248179.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:00.329Z,1513248180.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:00.351Z,1513248180.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:00.716Z,1513248180.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:00.734Z,1513248180.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:01.116Z,1513248181.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:01.132Z,1513248181.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:01.530Z,1513248181.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:01.559Z,1513248181.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:01.934Z,1513248181.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:01.970Z,1513248181.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:02.338Z,1513248182.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:02.372Z,1513248182.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:02.814Z,1513248182.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:02.859Z,1513248182.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:03.108Z,1513248183.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:03.156Z,1513248183.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:03.522Z,1513248183.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:03.546Z,1513248183.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:03.935Z,1513248183.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:03.980Z,1513248183.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:04.335Z,1513248184.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:04.351Z,1513248184.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:04.763Z,1513248184.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:04.826Z,1513248184.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:05.122Z,1513248185.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:05.157Z,1513248185.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:05.522Z,1513248185.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:05.548Z,1513248185.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:05.936Z,1513248185.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:05.951Z,1513248185.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:06.383Z,1513248186.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:06.422Z,1513248186.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:06.718Z,1513248186.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:06.743Z,1513248186.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:07.120Z,1513248187.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:07.136Z,1513248187.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:07.529Z,1513248187.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:07.544Z,1513248187.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:07.930Z,1513248187.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:07.944Z,1513248187.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:08.400Z,1513248188.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:08.507Z,1513248188.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:08.716Z,1513248188.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:08.732Z,1513248188.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:09.118Z,1513248189.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:09.133Z,1513248189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:09.510Z,1513248189.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:09.530Z,1513248189.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:09.920Z,1513248189.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:09.935Z,1513248189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:10.336Z,1513248190.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:10.431Z,1513248190.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:10.734Z,1513248190.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:10.766Z,1513248190.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:11.122Z,1513248191.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:11.136Z,1513248191.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:11.523Z,1513248191.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:11.538Z,1513248191.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:11.915Z,1513248191.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:11.931Z,1513248191.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:12.333Z,1513248192.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:12.418Z,1513248192.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:12.707Z,1513248192.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:12.734Z,1513248192.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:13.107Z,1513248193.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:13.175Z,1513248193.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:13.530Z,1513248193.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:13.549Z,1513248193.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:13.934Z,1513248193.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:13.950Z,1513248193.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:14.326Z,1513248194.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:14.343Z,1513248194.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:14.712Z,1513248194.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:14.767Z,1513248194.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:15.116Z,1513248195.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:15.143Z,1513248195.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:15.537Z,1513248195.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:15.646Z,1513248195.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:15.922Z,1513248195.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:15.949Z,1513248195.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:16.313Z,1513248196.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:16.328Z,1513248196.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:16.761Z,1513248196.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:16.804Z,1513248196.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:17.116Z,1513248197.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:17.132Z,1513248197.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:17.514Z,1513248197.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:17.528Z,1513248197.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:17.968Z,1513248197.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:18.007Z,1513248198.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:18.330Z,1513248198.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:18.362Z,1513248198.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:18.752Z,1513248198.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:18.791Z,1513248198.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:19.115Z,1513248199.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:19.130Z,1513248199.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:19.526Z,1513248199.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:19.577Z,1513248199.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:19.932Z,1513248199.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:19.947Z,1513248199.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:20.383Z,1513248200.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:20.401Z,1513248200.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:20.713Z,1513248200.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:20.746Z,1513248200.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:21.124Z,1513248201.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:21.171Z,1513248201.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:21.518Z,1513248201.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:21.552Z,1513248201.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:21.941Z,1513248201.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:21.956Z,1513248201.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:22.386Z,1513248202.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:22.408Z,1513248202.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:22.720Z,1513248202.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:22.738Z,1513248202.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:23.112Z,1513248203.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:23.135Z,1513248203.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:23.530Z,1513248203.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:23.546Z,1513248203.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:23.934Z,1513248203.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:24.020Z,1513248204.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:24.372Z,1513248204.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:24.452Z,1513248204.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:24.732Z,1513248204.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:24.748Z,1513248204.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:25.112Z,1513248205.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:25.191Z,1513248205.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:25.530Z,1513248205.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:25.551Z,1513248205.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:28.996Z,1513248208.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:29.040Z,1513248209.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:29.150Z,1513248209.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:29.166Z,1513248209.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:29.497Z,1513248209.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:29.544Z,1513248209.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:29.906Z,1513248209.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:29.921Z,1513248209.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:30.290Z,1513248210.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:30.315Z,1513248210.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:30.809Z,1513248210.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:30.847Z,1513248210.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:31.111Z,1513248211.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:31.125Z,1513248211.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:31.511Z,1513248211.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:31.527Z,1513248211.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:31.903Z,1513248211.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:31.918Z,1513248211.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:32.292Z,1513248212.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:32.321Z,1513248212.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:32.754Z,1513248212.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:32.793Z,1513248212.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:33.098Z,1513248213.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:33.112Z,1513248213.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:33.513Z,1513248213.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:33.543Z,1513248213.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:33.913Z,1513248213.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:33.940Z,1513248213.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:34.302Z,1513248214.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:34.316Z,1513248214.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:34.702Z,1513248214.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:34.727Z,1513248214.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:35.095Z,1513248215.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:35.136Z,1513248215.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:35.509Z,1513248215.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:35.535Z,1513248215.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:35.905Z,1513248215.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:35.932Z,1513248215.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:36.355Z,1513248216.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:36.420Z,1513248216.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:36.703Z,1513248216.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:36.718Z,1513248216.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:37.120Z,1513248217.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:37.152Z,1513248217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:37.505Z,1513248217.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:37.528Z,1513248217.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:37.907Z,1513248217.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:37.955Z,1513248217.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:38.310Z,1513248218.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:38.390Z,1513248218.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:38.696Z,1513248218.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:38.724Z,1513248218.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:39.088Z,1513248219.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:39.124Z,1513248219.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:39.538Z,1513248219.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:39.571Z,1513248219.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:39.911Z,1513248219.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:39.932Z,1513248219.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:40.419Z,1513248220.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:40.448Z,1513248220.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:40.689Z,1513248220.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:40.726Z,1513248220.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:41.098Z,1513248221.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:41.127Z,1513248221.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:41.492Z,1513248221.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:41.527Z,1513248221.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:41.904Z,1513248221.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:41.933Z,1513248221.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:42.299Z,1513248222.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:42.331Z,1513248222.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:42.709Z,1513248222.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:42.732Z,1513248222.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:43.110Z,1513248223.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:43.135Z,1513248223.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:43.510Z,1513248223.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:43.532Z,1513248223.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:43.895Z,1513248223.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:43.911Z,1513248223.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:44.300Z,1513248224.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:44.334Z,1513248224.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:44.755Z,1513248224.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:44.795Z,1513248224.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:45.105Z,1513248225.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:45.121Z,1513248225.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:45.511Z,1513248225.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:45.531Z,1513248225.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:45.910Z,1513248225.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:45.926Z,1513248225.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:46.310Z,1513248226.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:46.331Z,1513248226.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:46.770Z,1513248226.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:46.819Z,1513248226.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:47.098Z,1513248227.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:47.113Z,1513248227.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:47.517Z,1513248227.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:47.602Z,1513248227.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:47.914Z,1513248227.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:47.937Z,1513248227.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:48.310Z,1513248228.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:48.396Z,1513248228.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:48.695Z,1513248228.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:48.712Z,1513248228.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:49.099Z,1513248229.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:49.127Z,1513248229.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:49.507Z,1513248229.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:49.522Z,1513248229.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:49.910Z,1513248229.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:49.956Z,1513248229.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:50.308Z,1513248230.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:50.431Z,1513248230.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:50.702Z,1513248230.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:50.728Z,1513248230.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:51.095Z,1513248231.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:51.135Z,1513248231.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:51.515Z,1513248231.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:51.539Z,1513248231.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:51.910Z,1513248231.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:51.984Z,1513248231.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:52.315Z,1513248232.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:52.419Z,1513248232.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:52.700Z,1513248232.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:52.729Z,1513248232.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:53.092Z,1513248233.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:53.135Z,1513248233.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:53.512Z,1513248233.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:53.526Z,1513248233.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:53.918Z,1513248233.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:53.933Z,1513248233.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:54.310Z,1513248234.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:54.394Z,1513248234.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:54.699Z,1513248234.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:54.730Z,1513248234.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:55.085Z,1513248235.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:55.100Z,1513248235.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:55.521Z,1513248235.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:55.536Z,1513248235.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:55.916Z,1513248235.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:55.930Z,1513248235.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:56.305Z,1513248236.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:56.328Z,1513248236.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:56.698Z,1513248236.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:56.737Z,1513248236.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:57.101Z,1513248237.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:57.134Z,1513248237.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:57.505Z,1513248237.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:57.531Z,1513248237.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:57.926Z,1513248237.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:57.940Z,1513248237.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:58.310Z,1513248238.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:58.335Z,1513248238.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:58.842Z,1513248238.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:58.877Z,1513248238.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:59.102Z,1513248239.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:59.124Z,1513248239.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:59.520Z,1513248239.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:59.535Z,1513248239.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:43:59.906Z,1513248239.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:43:59.930Z,1513248239.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:00.321Z,1513248240.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:00.377Z,1513248240.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:00.759Z,1513248240.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:00.795Z,1513248240.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:01.099Z,1513248241.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:01.128Z,1513248241.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:01.505Z,1513248241.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:01.535Z,1513248241.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:01.916Z,1513248241.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:01.931Z,1513248241.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:02.314Z,1513248242.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:02.417Z,1513248242.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:02.741Z,1513248242.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:02.768Z,1513248242.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:03.096Z,1513248243.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:03.115Z,1513248243.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:03.498Z,1513248243.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:03.537Z,1513248243.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:03.916Z,1513248243.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:03.931Z,1513248243.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:04.310Z,1513248244.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:04.417Z,1513248244.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:04.692Z,1513248244.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:04.714Z,1513248244.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:05.106Z,1513248245.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:05.123Z,1513248245.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:05.506Z,1513248245.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:05.521Z,1513248245.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:05.934Z,1513248245.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:05.963Z,1513248245.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:06.310Z,1513248246.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:06.405Z,1513248246.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:06.698Z,1513248246.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:06.728Z,1513248246.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:07.090Z,1513248247.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:07.128Z,1513248247.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:07.513Z,1513248247.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:07.529Z,1513248247.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:07.904Z,1513248247.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:07.935Z,1513248247.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:08.302Z,1513248248.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:08.387Z,1513248248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:08.703Z,1513248248.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:08.737Z,1513248248.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:09.120Z,1513248249.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:09.163Z,1513248249.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:09.510Z,1513248249.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:09.540Z,1513248249.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:09.926Z,1513248249.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:09.947Z,1513248249.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:10.309Z,1513248250.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:10.343Z,1513248250.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:10.709Z,1513248250.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:10.724Z,1513248250.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:11.100Z,1513248251.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:11.116Z,1513248251.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:11.507Z,1513248251.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:11.523Z,1513248251.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:11.906Z,1513248251.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:11.974Z,1513248251.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:12.346Z,1513248252.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:12.423Z,1513248252.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:12.751Z,1513248252.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:12.775Z,1513248252.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:13.098Z,1513248253.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:13.151Z,1513248253.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:13.509Z,1513248253.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:13.536Z,1513248253.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:13.921Z,1513248253.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:13.926Z,1513248253.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:13.959Z,1513248253.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:14.306Z,1513248254.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:14.331Z,1513248254.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:14.723Z,1513248254.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:14.751Z,1513248254.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:14.790Z,1513248254.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:15.095Z,1513248255.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:15.130Z,1513248255.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:15.137Z,1513248255.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:15.524Z,1513248255.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:15.549Z,1513248255.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:15.909Z,1513248255.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:15.934Z,1513248255.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:16.316Z,1513248256.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:16.421Z,1513248256.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:16.702Z,1513248256.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:16.723Z,1513248256.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:17.108Z,1513248257.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:17.127Z,1513248257.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:17.514Z,1513248257.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:17.531Z,1513248257.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:17.906Z,1513248257.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:17.920Z,1513248257.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:18.314Z,1513248258.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:18.408Z,1513248258.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:18.716Z,1513248258.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:18.735Z,1513248258.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:19.092Z,1513248259.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:19.122Z,1513248259.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:19.507Z,1513248259.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:19.523Z,1513248259.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:19.916Z,1513248259.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:19.931Z,1513248259.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:20.306Z,1513248260.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:20.383Z,1513248260.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:20.689Z,1513248260.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:20.712Z,1513248260.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:21.091Z,1513248261.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:21.131Z,1513248261.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:21.498Z,1513248261.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:21.535Z,1513248261.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:21.923Z,1513248261.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:21.947Z,1513248261.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:22.305Z,1513248262.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:22.388Z,1513248262.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:22.693Z,1513248262.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:22.735Z,1513248262.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:23.094Z,1513248263.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:23.127Z,1513248263.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:23.524Z,1513248263.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:23.539Z,1513248263.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:23.915Z,1513248263.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:23.933Z,1513248263.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:24.316Z,1513248264.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:24.332Z,1513248264.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:24.337Z,1513248264.337 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T10:39:24.1Z
2017-12-14T10:44:24.337Z,1513248264.337 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:44:24.337Z,1513248264.337 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:44:24.699Z,1513248264.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:24.726Z,1513248264.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:25.580Z,1513248265.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:25.596Z,1513248265.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:25.706Z,1513248265.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:25.744Z,1513248265.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:29.254Z,1513248269.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:29.269Z,1513248269.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:29.357Z,1513248269.357 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0236.lzma
2017-12-14T10:44:29.401Z,1513248269.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:29.442Z,1513248269.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:29.752Z,1513248269.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:29.767Z,1513248269.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:30.119Z,1513248270.119 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0236.lzma.bak
2017-12-14T10:44:30.120Z,1513248270.120 [DataOverHttps](INFO): SBD MOMSN=5438590
2017-12-14T10:44:30.160Z,1513248270.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:30.175Z,1513248270.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:31.407Z,1513248271.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:31.422Z,1513248271.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:31.540Z,1513248271.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:31.571Z,1513248271.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:35.142Z,1513248275.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:35.223Z,1513248275.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:35.326Z,1513248275.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:35.363Z,1513248275.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:35.705Z,1513248275.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:35.736Z,1513248275.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:36.116Z,1513248276.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:36.164Z,1513248276.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:36.496Z,1513248276.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:36.511Z,1513248276.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:36.895Z,1513248276.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:36.950Z,1513248276.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:40.291Z,1513248280.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:40.305Z,1513248280.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:40.382Z,1513248280.382 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0237.lzma
2017-12-14T10:44:40.414Z,1513248280.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:40.450Z,1513248280.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:40.787Z,1513248280.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:40.808Z,1513248280.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:41.135Z,1513248281.135 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0237.lzma.bak
2017-12-14T10:44:41.136Z,1513248281.136 [DataOverHttps](INFO): SBD MOMSN=5438593
2017-12-14T10:44:41.204Z,1513248281.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:41.246Z,1513248281.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:41.910Z,1513248281.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:42.319Z,1513248282.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:42.342Z,1513248282.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:42.347Z,1513248282.347 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:44:42.347Z,1513248282.347 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:44:42.347Z,1513248282.347 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:44:42.447Z,1513248282.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:42.490Z,1513248282.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:42.708Z,1513248282.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:43.117Z,1513248283.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:43.913Z,1513248283.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:44.709Z,1513248284.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:45.113Z,1513248285.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:45.833Z,1513248285.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:45.872Z,1513248285.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:45.992Z,1513248285.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:46.008Z,1513248286.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:46.448Z,1513248286.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:46.471Z,1513248286.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:46.754Z,1513248286.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:46.777Z,1513248286.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:47.154Z,1513248287.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:47.177Z,1513248287.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:47.584Z,1513248287.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:47.616Z,1513248287.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:47.944Z,1513248287.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:47.979Z,1513248287.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:48.396Z,1513248288.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:48.420Z,1513248288.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:48.769Z,1513248288.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:48.784Z,1513248288.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:49.177Z,1513248289.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:49.199Z,1513248289.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:49.560Z,1513248289.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:49.584Z,1513248289.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:49.952Z,1513248289.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:49.981Z,1513248289.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:50.421Z,1513248290.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:50.448Z,1513248290.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:50.771Z,1513248290.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:50.790Z,1513248290.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:51.170Z,1513248291.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:51.184Z,1513248291.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:51.567Z,1513248291.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:51.586Z,1513248291.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:51.972Z,1513248291.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:51.987Z,1513248291.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:52.358Z,1513248292.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:52.444Z,1513248292.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:52.444Z,1513248292.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204
2017-12-14T10:44:52.444Z,1513248292.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:44:52.454Z,1513248292.454 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:52.454Z,1513248292.454 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 204
2017-12-14T10:44:52.455Z,1513248292.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:44:52.456Z,1513248292.456 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:52.456Z,1513248292.456 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204
2017-12-14T10:44:52.465Z,1513248292.465 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:44:52.493Z,1513248292.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:44:52.493Z,1513248292.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:44:52.494Z,1513248292.494 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:44:52.755Z,1513248292.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:52.804Z,1513248292.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:44:52.804Z,1513248292.804 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204
2017-12-14T10:44:52.804Z,1513248292.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:44:52.804Z,1513248292.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 204
2017-12-14T10:44:52.809Z,1513248292.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:44:52.809Z,1513248292.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204
2017-12-14T10:44:53.153Z,1513248293.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:53.179Z,1513248293.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:44:53.179Z,1513248293.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:44:53.180Z,1513248293.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:44:53.180Z,1513248293.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:44:53.180Z,1513248293.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:44:53.185Z,1513248293.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:44:53.185Z,1513248293.185 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:44:53.186Z,1513248293.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:44:53.186Z,1513248293.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:44:53.557Z,1513248293.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:53.572Z,1513248293.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:53.992Z,1513248293.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:54.046Z,1513248294.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:54.352Z,1513248294.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:54.367Z,1513248294.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:54.772Z,1513248294.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:54.811Z,1513248294.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:55.163Z,1513248295.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:55.179Z,1513248295.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:55.562Z,1513248295.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:55.578Z,1513248295.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:55.921Z,1513248295.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:55.959Z,1513248295.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:55.978Z,1513248295.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:56.357Z,1513248296.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:56.379Z,1513248296.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:56.723Z,1513248296.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:56.771Z,1513248296.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:56.811Z,1513248296.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:57.151Z,1513248297.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:57.162Z,1513248297.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:57.201Z,1513248297.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:57.569Z,1513248297.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:57.583Z,1513248297.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:57.946Z,1513248297.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:57.970Z,1513248297.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:58.040Z,1513248298.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:58.423Z,1513248298.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:58.442Z,1513248298.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:58.742Z,1513248298.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:58.746Z,1513248298.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:58.778Z,1513248298.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:59.146Z,1513248299.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:59.148Z,1513248299.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:59.187Z,1513248299.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:59.547Z,1513248299.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:59.583Z,1513248299.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:44:59.946Z,1513248299.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:44:59.995Z,1513248299.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:00.439Z,1513248300.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:00.487Z,1513248300.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:00.756Z,1513248300.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:00.792Z,1513248300.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:01.174Z,1513248301.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:01.195Z,1513248301.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:01.554Z,1513248301.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:01.587Z,1513248301.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:01.948Z,1513248301.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:01.964Z,1513248301.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:02.410Z,1513248302.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:02.460Z,1513248302.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:02.748Z,1513248302.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:02.785Z,1513248302.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:03.151Z,1513248303.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:03.192Z,1513248303.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:03.572Z,1513248303.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:03.586Z,1513248303.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:03.959Z,1513248303.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:03.974Z,1513248303.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:04.414Z,1513248304.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:04.449Z,1513248304.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:04.740Z,1513248304.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:04.773Z,1513248304.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:05.143Z,1513248305.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:05.185Z,1513248305.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:05.547Z,1513248305.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:05.579Z,1513248305.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:05.943Z,1513248305.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:05.974Z,1513248305.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:06.341Z,1513248306.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:06.443Z,1513248306.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:06.776Z,1513248306.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:06.811Z,1513248306.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:07.158Z,1513248307.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:07.187Z,1513248307.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:07.554Z,1513248307.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:07.577Z,1513248307.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:07.952Z,1513248307.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:07.967Z,1513248307.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:08.353Z,1513248308.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:08.396Z,1513248308.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:08.757Z,1513248308.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:08.800Z,1513248308.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:09.154Z,1513248309.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:09.175Z,1513248309.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:09.563Z,1513248309.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:09.578Z,1513248309.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:09.998Z,1513248309.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:10.023Z,1513248310.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:10.362Z,1513248310.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:10.383Z,1513248310.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:10.777Z,1513248310.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:10.875Z,1513248310.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:11.153Z,1513248311.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:11.169Z,1513248311.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:11.556Z,1513248311.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:11.572Z,1513248311.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:11.956Z,1513248311.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:11.972Z,1513248311.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:12.397Z,1513248312.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:12.451Z,1513248312.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:12.776Z,1513248312.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:12.792Z,1513248312.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:13.189Z,1513248313.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:13.220Z,1513248313.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:13.562Z,1513248313.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:13.593Z,1513248313.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:13.949Z,1513248313.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:13.964Z,1513248313.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:14.470Z,1513248314.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:14.495Z,1513248314.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:14.747Z,1513248314.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:14.778Z,1513248314.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:15.143Z,1513248315.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:15.183Z,1513248315.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:15.575Z,1513248315.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:15.591Z,1513248315.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:15.969Z,1513248315.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:15.984Z,1513248315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:16.464Z,1513248316.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:16.500Z,1513248316.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:16.764Z,1513248316.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:16.799Z,1513248316.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:17.151Z,1513248317.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:17.166Z,1513248317.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:17.551Z,1513248317.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:17.565Z,1513248317.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:17.955Z,1513248317.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:17.970Z,1513248317.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:18.405Z,1513248318.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:18.445Z,1513248318.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:18.766Z,1513248318.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:18.793Z,1513248318.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:19.165Z,1513248319.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:19.191Z,1513248319.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:19.558Z,1513248319.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:19.585Z,1513248319.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:19.966Z,1513248319.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:19.999Z,1513248319.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:20.353Z,1513248320.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:20.483Z,1513248320.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:20.747Z,1513248320.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:20.788Z,1513248320.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:21.164Z,1513248321.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:21.205Z,1513248321.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:21.567Z,1513248321.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:21.587Z,1513248321.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:21.967Z,1513248321.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:22.017Z,1513248322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:22.367Z,1513248322.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:22.381Z,1513248322.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:22.797Z,1513248322.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:22.859Z,1513248322.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:23.156Z,1513248323.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:23.171Z,1513248323.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:23.554Z,1513248323.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:23.568Z,1513248323.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:23.921Z,1513248323.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:23.965Z,1513248323.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:23.980Z,1513248323.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:24.354Z,1513248324.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:24.368Z,1513248324.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:24.718Z,1513248324.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:24.770Z,1513248324.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:24.785Z,1513248324.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:25.166Z,1513248325.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:25.181Z,1513248325.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:25.526Z,1513248325.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:25.568Z,1513248325.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:25.584Z,1513248325.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:25.953Z,1513248325.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:25.967Z,1513248325.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:26.322Z,1513248326.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:26.377Z,1513248326.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:26.410Z,1513248326.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:26.745Z,1513248326.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:26.760Z,1513248326.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:27.148Z,1513248327.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:27.162Z,1513248327.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:27.559Z,1513248327.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:27.586Z,1513248327.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:27.970Z,1513248327.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:27.991Z,1513248327.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:28.397Z,1513248328.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:28.424Z,1513248328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:28.751Z,1513248328.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:28.787Z,1513248328.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:29.211Z,1513248329.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:29.318Z,1513248329.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:29.550Z,1513248329.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:29.567Z,1513248329.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:29.947Z,1513248329.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:29.967Z,1513248329.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:30.386Z,1513248330.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:30.439Z,1513248330.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:30.771Z,1513248330.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:30.786Z,1513248330.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:31.166Z,1513248331.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:31.185Z,1513248331.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:31.567Z,1513248331.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:31.594Z,1513248331.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:31.948Z,1513248331.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:31.978Z,1513248331.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:32.383Z,1513248332.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:32.408Z,1513248332.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:32.747Z,1513248332.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:32.765Z,1513248332.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:33.207Z,1513248333.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:33.252Z,1513248333.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:33.563Z,1513248333.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:33.591Z,1513248333.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:33.968Z,1513248333.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:34.006Z,1513248334.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:34.404Z,1513248334.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:34.481Z,1513248334.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:34.762Z,1513248334.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:34.785Z,1513248334.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:35.162Z,1513248335.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:35.189Z,1513248335.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:35.544Z,1513248335.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:35.580Z,1513248335.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:35.973Z,1513248335.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:35.988Z,1513248335.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:36.343Z,1513248336.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:36.382Z,1513248336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:36.779Z,1513248336.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:36.798Z,1513248336.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:37.170Z,1513248337.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:37.191Z,1513248337.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:37.566Z,1513248337.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:37.586Z,1513248337.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:37.944Z,1513248337.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:37.977Z,1513248337.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:38.343Z,1513248338.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:38.382Z,1513248338.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:38.775Z,1513248338.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:38.814Z,1513248338.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:39.154Z,1513248339.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:39.195Z,1513248339.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:39.562Z,1513248339.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:39.591Z,1513248339.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:39.906Z,1513248339.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:39.969Z,1513248339.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:39.992Z,1513248339.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:40.419Z,1513248340.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:40.465Z,1513248340.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:40.701Z,1513248340.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:40.751Z,1513248340.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:40.776Z,1513248340.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:41.105Z,1513248341.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:41.148Z,1513248341.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:41.163Z,1513248341.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:41.551Z,1513248341.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:41.566Z,1513248341.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:41.953Z,1513248341.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:41.968Z,1513248341.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:42.418Z,1513248342.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:42.491Z,1513248342.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:42.772Z,1513248342.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:42.815Z,1513248342.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:46.165Z,1513248346.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:46.191Z,1513248346.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:46.319Z,1513248346.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:46.421Z,1513248346.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:46.648Z,1513248346.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:46.711Z,1513248346.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:47.059Z,1513248347.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:47.066Z,1513248347.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x41506 got:0x414
2017-12-14T10:45:47.106Z,1513248347.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:47.433Z,1513248347.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:47.491Z,1513248347.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:47.849Z,1513248347.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:47.875Z,1513248347.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:48.263Z,1513248348.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:48.295Z,1513248348.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:48.656Z,1513248348.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:48.681Z,1513248348.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:49.044Z,1513248349.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:49.094Z,1513248349.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:49.443Z,1513248349.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:49.457Z,1513248349.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:49.844Z,1513248349.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:49.866Z,1513248349.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:50.253Z,1513248350.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:50.267Z,1513248350.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:50.703Z,1513248350.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:50.768Z,1513248350.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:51.062Z,1513248351.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:51.084Z,1513248351.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:51.466Z,1513248351.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:51.480Z,1513248351.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:51.846Z,1513248351.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:51.887Z,1513248351.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:52.242Z,1513248352.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:52.286Z,1513248352.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:52.643Z,1513248352.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:52.725Z,1513248352.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:53.044Z,1513248353.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:53.087Z,1513248353.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:53.449Z,1513248353.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:53.458Z,1513248353.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x25840 got:0x24576
2017-12-14T10:45:53.492Z,1513248353.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:53.850Z,1513248353.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:53.893Z,1513248353.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:54.262Z,1513248354.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:54.292Z,1513248354.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:54.673Z,1513248354.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:54.692Z,1513248354.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:55.039Z,1513248355.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:55.072Z,1513248355.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:55.439Z,1513248355.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:55.479Z,1513248355.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:55.840Z,1513248355.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:55.911Z,1513248355.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:56.239Z,1513248356.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:56.277Z,1513248356.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:56.677Z,1513248356.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:56.699Z,1513248356.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:57.057Z,1513248357.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:57.096Z,1513248357.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:57.475Z,1513248357.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:57.482Z,1513248357.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x39038 got:0x58224
2017-12-14T10:45:57.503Z,1513248357.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:57.904Z,1513248357.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:57.959Z,1513248357.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:58.244Z,1513248358.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:58.277Z,1513248358.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:58.649Z,1513248358.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:58.686Z,1513248358.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:59.048Z,1513248359.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:59.078Z,1513248359.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:59.436Z,1513248359.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:59.471Z,1513248359.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:45:59.866Z,1513248359.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:45:59.884Z,1513248359.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:00.262Z,1513248360.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:00.303Z,1513248360.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:00.658Z,1513248360.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:00.685Z,1513248360.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:01.040Z,1513248361.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:01.091Z,1513248361.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:01.440Z,1513248361.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:01.481Z,1513248361.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:01.844Z,1513248361.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:01.883Z,1513248361.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:02.239Z,1513248362.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:02.254Z,1513248362.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:02.672Z,1513248362.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:02.689Z,1513248362.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:03.064Z,1513248363.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:03.088Z,1513248363.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:03.457Z,1513248363.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:03.488Z,1513248363.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:03.846Z,1513248363.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:03.860Z,1513248363.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:04.289Z,1513248364.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:04.338Z,1513248364.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:04.651Z,1513248364.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:04.744Z,1513248364.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:05.050Z,1513248365.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:05.099Z,1513248365.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:05.447Z,1513248365.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:05.462Z,1513248365.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:05.862Z,1513248365.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:05.877Z,1513248365.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:06.263Z,1513248366.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:06.283Z,1513248366.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:06.684Z,1513248366.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:06.761Z,1513248366.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:07.051Z,1513248367.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:07.083Z,1513248367.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:07.438Z,1513248367.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:07.467Z,1513248367.467 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T10:46:07.467Z,1513248367.467 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:46:07.467Z,1513248367.467 [BPC1](ERROR): Data Fault
2017-12-14T10:46:07.475Z,1513248367.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:07.489Z,1513248367.489 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:46:07.840Z,1513248367.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:07.879Z,1513248367.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:08.238Z,1513248368.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:08.279Z,1513248368.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:08.657Z,1513248368.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:08.686Z,1513248368.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:08.699Z,1513248368.699 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:46:08.699Z,1513248368.699 [BPC1] No Fault, FailCount= 1
2017-12-14T10:46:09.076Z,1513248369.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:09.143Z,1513248369.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:09.462Z,1513248369.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:09.485Z,1513248369.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:09.848Z,1513248369.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:09.897Z,1513248369.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:10.242Z,1513248370.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:10.256Z,1513248370.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:10.639Z,1513248370.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:10.679Z,1513248370.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:11.040Z,1513248371.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:11.115Z,1513248371.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:11.439Z,1513248371.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:11.471Z,1513248371.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:11.871Z,1513248371.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:11.886Z,1513248371.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:12.266Z,1513248372.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:12.290Z,1513248372.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:12.661Z,1513248372.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:12.692Z,1513248372.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:13.046Z,1513248373.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:13.095Z,1513248373.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:13.448Z,1513248373.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:13.466Z,1513248373.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:13.850Z,1513248373.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:13.873Z,1513248373.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:14.272Z,1513248374.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:14.348Z,1513248374.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:14.662Z,1513248374.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:14.703Z,1513248374.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:15.061Z,1513248375.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:15.085Z,1513248375.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:15.461Z,1513248375.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:15.477Z,1513248375.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:15.855Z,1513248375.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:15.878Z,1513248375.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:16.241Z,1513248376.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:16.288Z,1513248376.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:16.639Z,1513248376.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:16.678Z,1513248376.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:17.061Z,1513248377.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:17.080Z,1513248377.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:17.440Z,1513248377.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:17.508Z,1513248377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:17.860Z,1513248377.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:17.887Z,1513248377.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:18.269Z,1513248378.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:18.287Z,1513248378.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:18.697Z,1513248378.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:18.805Z,1513248378.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:19.051Z,1513248379.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:19.089Z,1513248379.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:19.445Z,1513248379.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:19.487Z,1513248379.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:19.844Z,1513248379.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:19.885Z,1513248379.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:20.265Z,1513248380.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:20.301Z,1513248380.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:20.719Z,1513248380.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:20.787Z,1513248380.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:21.072Z,1513248381.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:21.143Z,1513248381.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:21.451Z,1513248381.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:21.492Z,1513248381.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:21.851Z,1513248381.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:21.909Z,1513248381.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:22.255Z,1513248382.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:22.307Z,1513248382.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:22.644Z,1513248382.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:22.695Z,1513248382.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:23.047Z,1513248383.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:23.097Z,1513248383.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:23.445Z,1513248383.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:23.495Z,1513248383.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:23.857Z,1513248383.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:23.906Z,1513248383.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:24.255Z,1513248384.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:24.293Z,1513248384.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:24.658Z,1513248384.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:24.727Z,1513248384.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:25.062Z,1513248385.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:25.100Z,1513248385.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:25.455Z,1513248385.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:25.475Z,1513248385.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:25.861Z,1513248385.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:25.899Z,1513248385.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:26.248Z,1513248386.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:26.310Z,1513248386.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:26.673Z,1513248386.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:26.687Z,1513248386.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:27.061Z,1513248387.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:27.091Z,1513248387.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:27.466Z,1513248387.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:27.506Z,1513248387.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:27.879Z,1513248387.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:27.904Z,1513248387.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:28.254Z,1513248388.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:28.305Z,1513248388.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:28.647Z,1513248388.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:28.693Z,1513248388.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:29.047Z,1513248389.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:29.093Z,1513248389.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:29.474Z,1513248389.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:29.579Z,1513248389.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:29.867Z,1513248389.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:29.874Z,1513248389.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x48581 got:0x36837
2017-12-14T10:46:29.911Z,1513248389.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:30.271Z,1513248390.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:30.295Z,1513248390.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:30.652Z,1513248390.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:30.738Z,1513248390.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:31.040Z,1513248391.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:31.076Z,1513248391.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:31.444Z,1513248391.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:31.515Z,1513248391.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:31.853Z,1513248391.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:31.898Z,1513248391.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:32.250Z,1513248392.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:32.311Z,1513248392.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:32.711Z,1513248392.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:32.771Z,1513248392.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:33.063Z,1513248393.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:33.110Z,1513248393.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:33.462Z,1513248393.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:33.507Z,1513248393.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:33.843Z,1513248393.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:33.887Z,1513248393.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:34.253Z,1513248394.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:34.300Z,1513248394.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:34.708Z,1513248394.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:34.775Z,1513248394.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:35.041Z,1513248395.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:35.076Z,1513248395.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:35.441Z,1513248395.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:35.492Z,1513248395.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:35.822Z,1513248395.822 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:46:35.822Z,1513248395.822 [NAL9602] Data Fault, FailCount= 1
2017-12-14T10:46:35.822Z,1513248395.822 [NAL9602](ERROR): Data Fault
2017-12-14T10:46:35.841Z,1513248395.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:35.890Z,1513248395.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:35.919Z,1513248395.919 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:46:36.222Z,1513248396.222 [NAL9602](INFO): Powering down
2017-12-14T10:46:36.258Z,1513248396.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:36.296Z,1513248396.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:36.679Z,1513248396.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:36.704Z,1513248396.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:37.046Z,1513248397.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:37.120Z,1513248397.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:37.145Z,1513248397.145 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:46:37.146Z,1513248397.146 [NAL9602] No Fault, FailCount= 1
2017-12-14T10:46:37.440Z,1513248397.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:37.519Z,1513248397.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:37.841Z,1513248397.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:37.902Z,1513248397.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:38.254Z,1513248398.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:38.386Z,1513248398.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:38.649Z,1513248398.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:38.698Z,1513248398.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:39.050Z,1513248399.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:39.096Z,1513248399.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:39.451Z,1513248399.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:39.562Z,1513248399.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:39.855Z,1513248399.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:39.870Z,1513248399.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:40.249Z,1513248400.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:40.302Z,1513248400.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:40.640Z,1513248400.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:40.714Z,1513248400.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:41.040Z,1513248401.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:41.107Z,1513248401.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:41.474Z,1513248401.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:41.495Z,1513248401.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:41.841Z,1513248401.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:41.888Z,1513248401.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:42.241Z,1513248402.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:42.295Z,1513248402.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:42.649Z,1513248402.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:42.680Z,1513248402.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:43.056Z,1513248403.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:43.084Z,1513248403.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:48.318Z,1513248408.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:48.334Z,1513248408.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:48.429Z,1513248408.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:48.462Z,1513248408.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:48.818Z,1513248408.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:48.833Z,1513248408.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:49.215Z,1513248409.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:49.235Z,1513248409.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:49.612Z,1513248409.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:49.628Z,1513248409.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:50.012Z,1513248410.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:50.036Z,1513248410.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:50.416Z,1513248410.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:50.461Z,1513248410.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:50.826Z,1513248410.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:50.841Z,1513248410.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:51.221Z,1513248411.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:51.291Z,1513248411.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:51.620Z,1513248411.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:51.676Z,1513248411.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:52.019Z,1513248412.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:52.035Z,1513248412.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:52.413Z,1513248412.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:52.451Z,1513248412.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:52.819Z,1513248412.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:52.839Z,1513248412.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:53.217Z,1513248413.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:53.272Z,1513248413.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:53.649Z,1513248413.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:53.702Z,1513248413.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:54.015Z,1513248414.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:54.030Z,1513248414.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:54.416Z,1513248414.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:54.439Z,1513248414.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:54.821Z,1513248414.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:54.836Z,1513248414.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:55.220Z,1513248415.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:55.234Z,1513248415.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:55.613Z,1513248415.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:55.636Z,1513248415.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:56.027Z,1513248416.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:56.042Z,1513248416.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:56.408Z,1513248416.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:56.448Z,1513248416.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:56.839Z,1513248416.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:56.879Z,1513248416.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:57.206Z,1513248417.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:57.247Z,1513248417.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:57.614Z,1513248417.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:57.650Z,1513248417.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:58.009Z,1513248418.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:58.024Z,1513248418.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:58.450Z,1513248418.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:58.502Z,1513248418.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:58.811Z,1513248418.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:58.827Z,1513248418.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:59.212Z,1513248419.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:59.227Z,1513248419.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:46:59.614Z,1513248419.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:46:59.629Z,1513248419.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:00.068Z,1513248420.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:00.123Z,1513248420.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:00.408Z,1513248420.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:00.423Z,1513248420.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:00.816Z,1513248420.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:00.835Z,1513248420.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:01.213Z,1513248421.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:01.228Z,1513248421.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:01.613Z,1513248421.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:01.664Z,1513248421.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:02.015Z,1513248422.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:02.035Z,1513248422.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:02.413Z,1513248422.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:02.428Z,1513248422.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:02.828Z,1513248422.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:02.859Z,1513248422.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:03.232Z,1513248423.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:03.278Z,1513248423.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:03.612Z,1513248423.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:03.639Z,1513248423.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:04.019Z,1513248424.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:04.034Z,1513248424.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:04.415Z,1513248424.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:04.439Z,1513248424.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:04.808Z,1513248424.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:04.841Z,1513248424.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:05.221Z,1513248425.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:05.236Z,1513248425.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:05.607Z,1513248425.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:05.640Z,1513248425.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:06.018Z,1513248426.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:06.033Z,1513248426.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:06.426Z,1513248426.426 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:47:06.448Z,1513248426.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:06.483Z,1513248426.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:06.808Z,1513248426.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:06.840Z,1513248426.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:07.207Z,1513248427.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:07.248Z,1513248427.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:07.600Z,1513248427.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:07.631Z,1513248427.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:08.011Z,1513248428.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:08.036Z,1513248428.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:08.412Z,1513248428.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:08.455Z,1513248428.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:08.811Z,1513248428.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:08.834Z,1513248428.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:09.212Z,1513248429.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:09.227Z,1513248429.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:09.623Z,1513248429.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:09.674Z,1513248429.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:10.017Z,1513248430.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:10.033Z,1513248430.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:10.416Z,1513248430.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:10.450Z,1513248430.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:10.814Z,1513248430.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:10.829Z,1513248430.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:11.215Z,1513248431.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:11.230Z,1513248431.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:11.616Z,1513248431.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:11.673Z,1513248431.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:12.017Z,1513248432.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:12.032Z,1513248432.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:12.443Z,1513248432.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:12.467Z,1513248432.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:12.838Z,1513248432.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:12.878Z,1513248432.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:13.206Z,1513248433.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:13.239Z,1513248433.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:13.607Z,1513248433.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:13.691Z,1513248433.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:14.006Z,1513248434.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:14.039Z,1513248434.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:14.406Z,1513248434.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:14.443Z,1513248434.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:14.806Z,1513248434.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:14.838Z,1513248434.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:15.208Z,1513248435.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:15.251Z,1513248435.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:15.606Z,1513248435.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:15.640Z,1513248435.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:16.056Z,1513248436.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:16.110Z,1513248436.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:16.406Z,1513248436.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:16.440Z,1513248436.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:16.807Z,1513248436.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:16.833Z,1513248436.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:17.231Z,1513248437.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:17.246Z,1513248437.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:17.590Z,1513248437.590 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:47:17.607Z,1513248437.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:17.647Z,1513248437.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:18.011Z,1513248438.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:18.047Z,1513248438.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:18.417Z,1513248438.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:18.454Z,1513248438.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:18.836Z,1513248438.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:18.859Z,1513248438.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:19.217Z,1513248439.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:19.247Z,1513248439.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:19.611Z,1513248439.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:19.639Z,1513248439.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:20.018Z,1513248440.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:20.071Z,1513248440.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:20.433Z,1513248440.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:20.472Z,1513248440.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:20.830Z,1513248440.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:20.849Z,1513248440.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:21.235Z,1513248441.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:21.249Z,1513248441.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:21.620Z,1513248441.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:21.635Z,1513248441.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:22.007Z,1513248442.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:22.042Z,1513248442.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:22.442Z,1513248442.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:22.486Z,1513248442.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:22.811Z,1513248442.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:22.845Z,1513248442.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:23.210Z,1513248443.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:23.242Z,1513248443.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:23.611Z,1513248443.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:23.667Z,1513248443.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:24.025Z,1513248444.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:24.051Z,1513248444.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:24.426Z,1513248444.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:24.452Z,1513248444.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:24.832Z,1513248444.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:24.847Z,1513248444.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:25.216Z,1513248445.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:25.251Z,1513248445.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:25.648Z,1513248445.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:25.699Z,1513248445.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:26.015Z,1513248446.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:26.046Z,1513248446.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:26.468Z,1513248446.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:26.500Z,1513248446.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:26.825Z,1513248446.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:26.850Z,1513248446.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:27.230Z,1513248447.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:27.259Z,1513248447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:27.625Z,1513248447.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:27.655Z,1513248447.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:28.011Z,1513248448.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:28.027Z,1513248448.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:28.415Z,1513248448.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:28.430Z,1513248448.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:28.852Z,1513248448.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:28.876Z,1513248448.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:29.217Z,1513248449.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:29.239Z,1513248449.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:29.618Z,1513248449.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:29.712Z,1513248449.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:30.023Z,1513248450.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:30.043Z,1513248450.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:30.416Z,1513248450.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:30.433Z,1513248450.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:30.818Z,1513248450.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:30.839Z,1513248450.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:31.218Z,1513248451.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:31.233Z,1513248451.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:31.616Z,1513248451.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:31.632Z,1513248451.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:32.066Z,1513248452.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:32.090Z,1513248452.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:32.417Z,1513248452.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:32.451Z,1513248452.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:32.835Z,1513248452.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:32.851Z,1513248452.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:33.230Z,1513248453.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:33.247Z,1513248453.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:33.622Z,1513248453.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:33.651Z,1513248453.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:34.011Z,1513248454.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:34.039Z,1513248454.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:34.430Z,1513248454.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:34.455Z,1513248454.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:34.808Z,1513248454.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:34.851Z,1513248454.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:35.249Z,1513248455.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:35.293Z,1513248455.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:35.607Z,1513248455.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:35.667Z,1513248455.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:36.030Z,1513248456.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:36.103Z,1513248456.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:36.439Z,1513248456.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:36.454Z,1513248456.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:36.838Z,1513248456.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:36.853Z,1513248456.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:37.208Z,1513248457.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:37.255Z,1513248457.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:37.611Z,1513248457.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:37.639Z,1513248457.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:38.008Z,1513248458.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:38.054Z,1513248458.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:38.448Z,1513248458.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:38.496Z,1513248458.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:38.839Z,1513248458.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:38.855Z,1513248458.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:39.241Z,1513248459.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:39.256Z,1513248459.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:39.633Z,1513248459.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:39.648Z,1513248459.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:40.094Z,1513248460.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:40.119Z,1513248460.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:40.462Z,1513248460.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:40.506Z,1513248460.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:40.819Z,1513248460.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:40.858Z,1513248460.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:41.219Z,1513248461.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:41.234Z,1513248461.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:41.671Z,1513248461.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:41.711Z,1513248461.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:42.030Z,1513248462.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:42.060Z,1513248462.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:42.430Z,1513248462.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:42.461Z,1513248462.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:42.829Z,1513248462.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:42.865Z,1513248462.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:43.214Z,1513248463.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:43.236Z,1513248463.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:46.729Z,1513248466.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:46.776Z,1513248466.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:46.893Z,1513248466.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:46.935Z,1513248466.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:47.244Z,1513248467.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:47.314Z,1513248467.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:47.642Z,1513248467.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:47.668Z,1513248467.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:48.062Z,1513248468.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:48.086Z,1513248468.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:48.431Z,1513248468.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:48.446Z,1513248468.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:48.834Z,1513248468.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:48.849Z,1513248468.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:49.235Z,1513248469.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:49.250Z,1513248469.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:49.633Z,1513248469.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:49.648Z,1513248469.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:50.047Z,1513248470.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:50.077Z,1513248470.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:50.438Z,1513248470.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:50.454Z,1513248470.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:50.834Z,1513248470.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:50.849Z,1513248470.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:51.263Z,1513248471.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:51.292Z,1513248471.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:51.648Z,1513248471.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:51.699Z,1513248471.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:52.033Z,1513248472.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:52.048Z,1513248472.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:52.432Z,1513248472.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:52.511Z,1513248472.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:52.838Z,1513248472.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:52.854Z,1513248472.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:53.237Z,1513248473.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:53.252Z,1513248473.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:53.252Z,1513248473.252 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205
2017-12-14T10:47:53.252Z,1513248473.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:47:53.254Z,1513248473.254 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:53.254Z,1513248473.254 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 205
2017-12-14T10:47:53.254Z,1513248473.254 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:47:53.256Z,1513248473.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:53.256Z,1513248473.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205
2017-12-14T10:47:53.257Z,1513248473.257 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:47:53.289Z,1513248473.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:47:53.289Z,1513248473.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:47:53.289Z,1513248473.289 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:47:53.646Z,1513248473.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:53.680Z,1513248473.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:47:53.680Z,1513248473.680 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205
2017-12-14T10:47:53.680Z,1513248473.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:47:53.680Z,1513248473.680 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 205
2017-12-14T10:47:53.685Z,1513248473.685 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:47:53.685Z,1513248473.685 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205
2017-12-14T10:47:54.040Z,1513248474.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:54.054Z,1513248474.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:47:54.054Z,1513248474.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:47:54.055Z,1513248474.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:47:54.055Z,1513248474.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:47:54.056Z,1513248474.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:47:54.056Z,1513248474.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:47:54.056Z,1513248474.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:47:54.057Z,1513248474.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:47:54.057Z,1513248474.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:47:54.491Z,1513248474.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:54.545Z,1513248474.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:54.823Z,1513248474.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:54.851Z,1513248474.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:55.223Z,1513248475.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:55.248Z,1513248475.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:55.623Z,1513248475.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:55.647Z,1513248475.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:56.047Z,1513248476.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:56.062Z,1513248476.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:56.449Z,1513248476.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:56.471Z,1513248476.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:56.843Z,1513248476.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:56.858Z,1513248476.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:57.223Z,1513248477.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:57.250Z,1513248477.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:57.671Z,1513248477.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:57.707Z,1513248477.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:58.023Z,1513248478.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:58.054Z,1513248478.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:58.427Z,1513248478.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:58.454Z,1513248478.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:58.841Z,1513248478.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:58.891Z,1513248478.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:59.246Z,1513248479.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:59.279Z,1513248479.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:47:59.640Z,1513248479.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:47:59.713Z,1513248479.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:00.029Z,1513248480.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:00.044Z,1513248480.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:00.427Z,1513248480.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:00.472Z,1513248480.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:00.831Z,1513248480.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:00.882Z,1513248480.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:01.233Z,1513248481.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:01.248Z,1513248481.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:01.631Z,1513248481.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:01.647Z,1513248481.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:02.041Z,1513248482.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:02.068Z,1513248482.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:02.441Z,1513248482.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:02.456Z,1513248482.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:02.866Z,1513248482.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:02.881Z,1513248482.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:03.239Z,1513248483.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:03.254Z,1513248483.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:03.635Z,1513248483.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:03.650Z,1513248483.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:04.045Z,1513248484.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:04.080Z,1513248484.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:04.427Z,1513248484.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:04.442Z,1513248484.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:04.846Z,1513248484.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:04.869Z,1513248484.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:05.250Z,1513248485.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:05.279Z,1513248485.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:05.638Z,1513248485.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:05.665Z,1513248485.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:06.028Z,1513248486.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:06.044Z,1513248486.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:06.428Z,1513248486.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:06.443Z,1513248486.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:06.828Z,1513248486.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:06.855Z,1513248486.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:07.285Z,1513248487.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:07.327Z,1513248487.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:07.637Z,1513248487.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:07.652Z,1513248487.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:08.038Z,1513248488.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:08.054Z,1513248488.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:08.460Z,1513248488.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:08.511Z,1513248488.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:08.856Z,1513248488.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:08.872Z,1513248488.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:09.230Z,1513248489.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:09.257Z,1513248489.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:09.629Z,1513248489.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:09.663Z,1513248489.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:10.033Z,1513248490.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:10.068Z,1513248490.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:10.460Z,1513248490.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:10.484Z,1513248490.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:10.856Z,1513248490.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:10.872Z,1513248490.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:11.241Z,1513248491.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:11.266Z,1513248491.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:11.636Z,1513248491.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:11.659Z,1513248491.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:12.029Z,1513248492.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:12.043Z,1513248492.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:12.432Z,1513248492.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:12.451Z,1513248492.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:12.835Z,1513248492.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:12.851Z,1513248492.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:13.232Z,1513248493.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:13.247Z,1513248493.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:13.671Z,1513248493.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:13.703Z,1513248493.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:14.038Z,1513248494.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:14.052Z,1513248494.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:14.447Z,1513248494.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:14.461Z,1513248494.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:14.838Z,1513248494.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:14.864Z,1513248494.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:15.223Z,1513248495.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:15.250Z,1513248495.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:15.627Z,1513248495.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:15.660Z,1513248495.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:16.028Z,1513248496.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:16.058Z,1513248496.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:16.424Z,1513248496.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:16.455Z,1513248496.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:16.874Z,1513248496.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:16.918Z,1513248496.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:17.243Z,1513248497.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:17.265Z,1513248497.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:17.642Z,1513248497.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:17.673Z,1513248497.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:18.028Z,1513248498.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:18.087Z,1513248498.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:18.431Z,1513248498.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:18.486Z,1513248498.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:18.831Z,1513248498.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:18.863Z,1513248498.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:19.232Z,1513248499.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:19.263Z,1513248499.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:19.632Z,1513248499.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:19.648Z,1513248499.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:20.044Z,1513248500.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:20.088Z,1513248500.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:20.442Z,1513248500.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:20.498Z,1513248500.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:20.838Z,1513248500.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:20.865Z,1513248500.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:21.234Z,1513248501.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:21.283Z,1513248501.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:21.629Z,1513248501.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:21.652Z,1513248501.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:22.030Z,1513248502.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:22.086Z,1513248502.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:22.469Z,1513248502.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:22.494Z,1513248502.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:22.845Z,1513248502.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:22.875Z,1513248502.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:23.274Z,1513248503.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:23.303Z,1513248503.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:23.638Z,1513248503.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:23.653Z,1513248503.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:24.034Z,1513248504.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:24.048Z,1513248504.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:24.433Z,1513248504.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:24.448Z,1513248504.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:24.832Z,1513248504.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:24.848Z,1513248504.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:25.267Z,1513248505.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:25.283Z,1513248505.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:25.638Z,1513248505.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:25.652Z,1513248505.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:26.038Z,1513248506.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:26.053Z,1513248506.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:26.453Z,1513248506.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:26.484Z,1513248506.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:26.844Z,1513248506.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:26.859Z,1513248506.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:27.224Z,1513248507.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:27.255Z,1513248507.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:27.628Z,1513248507.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:27.654Z,1513248507.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:28.023Z,1513248508.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:28.058Z,1513248508.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:28.423Z,1513248508.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:28.455Z,1513248508.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:28.842Z,1513248508.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:28.868Z,1513248508.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:29.252Z,1513248509.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:29.267Z,1513248509.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:29.653Z,1513248509.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:29.693Z,1513248509.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:30.031Z,1513248510.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:30.052Z,1513248510.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:30.423Z,1513248510.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:30.486Z,1513248510.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:30.823Z,1513248510.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:30.861Z,1513248510.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:31.237Z,1513248511.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:31.252Z,1513248511.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:31.624Z,1513248511.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:31.649Z,1513248511.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:32.049Z,1513248512.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:32.064Z,1513248512.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:32.445Z,1513248512.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:32.461Z,1513248512.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:32.868Z,1513248512.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:32.896Z,1513248512.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:33.223Z,1513248513.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:33.249Z,1513248513.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:33.624Z,1513248513.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:33.651Z,1513248513.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:34.025Z,1513248514.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:34.073Z,1513248514.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:34.424Z,1513248514.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:34.452Z,1513248514.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:34.842Z,1513248514.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:34.870Z,1513248514.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:35.249Z,1513248515.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:35.263Z,1513248515.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:35.647Z,1513248515.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:35.662Z,1513248515.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:36.071Z,1513248516.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:36.111Z,1513248516.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:36.468Z,1513248516.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:36.487Z,1513248516.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:36.823Z,1513248516.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:36.847Z,1513248516.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:37.224Z,1513248517.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:37.239Z,1513248517.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:37.627Z,1513248517.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:37.642Z,1513248517.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:38.046Z,1513248518.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:38.110Z,1513248518.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:38.445Z,1513248518.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:38.475Z,1513248518.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:38.842Z,1513248518.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:38.868Z,1513248518.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:39.269Z,1513248519.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:39.313Z,1513248519.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:39.632Z,1513248519.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:39.673Z,1513248519.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:40.030Z,1513248520.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:40.044Z,1513248520.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:40.429Z,1513248520.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:40.444Z,1513248520.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:40.850Z,1513248520.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:40.899Z,1513248520.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:41.249Z,1513248521.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:41.283Z,1513248521.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:41.638Z,1513248521.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:41.653Z,1513248521.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:42.032Z,1513248522.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:42.047Z,1513248522.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:42.448Z,1513248522.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:42.545Z,1513248522.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:42.830Z,1513248522.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:42.853Z,1513248522.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:43.234Z,1513248523.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:43.261Z,1513248523.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:46.890Z,1513248526.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:46.943Z,1513248526.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:47.054Z,1513248527.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:47.095Z,1513248527.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:47.413Z,1513248527.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:47.483Z,1513248527.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:47.809Z,1513248527.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:47.847Z,1513248527.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:48.192Z,1513248528.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:48.212Z,1513248528.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:48.599Z,1513248528.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:48.614Z,1513248528.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:49.008Z,1513248529.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:49.047Z,1513248529.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:49.395Z,1513248529.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:49.415Z,1513248529.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:49.813Z,1513248529.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:49.828Z,1513248529.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:50.206Z,1513248530.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:50.220Z,1513248530.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:50.602Z,1513248530.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:50.617Z,1513248530.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:51.015Z,1513248531.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:51.030Z,1513248531.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:51.401Z,1513248531.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:51.415Z,1513248531.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:51.793Z,1513248531.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:51.816Z,1513248531.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:52.192Z,1513248532.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:52.227Z,1513248532.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:52.588Z,1513248532.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:52.615Z,1513248532.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:53.001Z,1513248533.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:53.036Z,1513248533.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:53.405Z,1513248533.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:53.429Z,1513248533.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:53.819Z,1513248533.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:53.833Z,1513248533.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:54.190Z,1513248534.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:54.204Z,1513248534.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:54.592Z,1513248534.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:54.606Z,1513248534.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:55.015Z,1513248535.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:55.058Z,1513248535.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:55.391Z,1513248535.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:55.416Z,1513248535.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:55.808Z,1513248535.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:55.863Z,1513248535.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:56.214Z,1513248536.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:56.235Z,1513248536.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:56.618Z,1513248536.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:56.633Z,1513248536.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:57.013Z,1513248537.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:57.028Z,1513248537.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:57.391Z,1513248537.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:57.417Z,1513248537.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:57.795Z,1513248537.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:57.820Z,1513248537.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:58.219Z,1513248538.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:58.272Z,1513248538.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:58.591Z,1513248538.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:58.626Z,1513248538.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:59.010Z,1513248539.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:59.033Z,1513248539.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:59.417Z,1513248539.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:59.432Z,1513248539.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:48:59.818Z,1513248539.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:48:59.839Z,1513248539.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:00.189Z,1513248540.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:00.226Z,1513248540.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:00.591Z,1513248540.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:00.627Z,1513248540.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:00.993Z,1513248540.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:01.020Z,1513248541.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:01.397Z,1513248541.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:01.432Z,1513248541.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:01.802Z,1513248541.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:01.823Z,1513248541.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:02.214Z,1513248542.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:02.252Z,1513248542.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:02.602Z,1513248542.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:02.617Z,1513248542.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:02.998Z,1513248542.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:03.027Z,1513248543.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:03.406Z,1513248543.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:03.451Z,1513248543.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:03.800Z,1513248543.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:03.816Z,1513248543.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:04.198Z,1513248544.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:04.226Z,1513248544.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:04.624Z,1513248544.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:04.677Z,1513248544.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:05.008Z,1513248545.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:05.027Z,1513248545.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:05.413Z,1513248545.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:05.435Z,1513248545.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:05.815Z,1513248545.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:05.829Z,1513248545.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:06.192Z,1513248546.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:06.281Z,1513248546.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:06.595Z,1513248546.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:06.623Z,1513248546.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:07.014Z,1513248547.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:07.037Z,1513248547.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:07.398Z,1513248547.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:07.429Z,1513248547.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:07.825Z,1513248547.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:07.848Z,1513248547.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:08.209Z,1513248548.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:08.264Z,1513248548.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:08.599Z,1513248548.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:08.636Z,1513248548.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:09.002Z,1513248549.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:09.056Z,1513248549.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:09.398Z,1513248549.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:09.426Z,1513248549.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:09.798Z,1513248549.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:09.847Z,1513248549.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:10.201Z,1513248550.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:10.215Z,1513248550.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:10.608Z,1513248550.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:10.627Z,1513248550.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:11.012Z,1513248551.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:11.035Z,1513248551.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:11.414Z,1513248551.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:11.435Z,1513248551.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:11.815Z,1513248551.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:11.831Z,1513248551.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:12.196Z,1513248552.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:12.222Z,1513248552.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:12.591Z,1513248552.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:12.623Z,1513248552.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:12.998Z,1513248552.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:13.026Z,1513248553.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:13.391Z,1513248553.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:13.423Z,1513248553.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:13.458Z,1513248553.458 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:49:13.817Z,1513248553.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:13.831Z,1513248553.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:14.226Z,1513248554.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:14.247Z,1513248554.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:14.602Z,1513248554.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:14.618Z,1513248554.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:14.998Z,1513248554.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:15.019Z,1513248555.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:15.406Z,1513248555.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:15.421Z,1513248555.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:15.803Z,1513248555.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:15.819Z,1513248555.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:16.199Z,1513248556.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:16.216Z,1513248556.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:16.608Z,1513248556.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:16.623Z,1513248556.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:17.004Z,1513248557.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:17.032Z,1513248557.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:17.413Z,1513248557.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:17.427Z,1513248557.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:17.822Z,1513248557.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:17.844Z,1513248557.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:18.192Z,1513248558.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:18.251Z,1513248558.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:18.598Z,1513248558.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:18.624Z,1513248558.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:18.996Z,1513248558.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:19.022Z,1513248559.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:19.391Z,1513248559.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:19.422Z,1513248559.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:19.811Z,1513248559.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:19.831Z,1513248559.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:20.220Z,1513248560.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:20.235Z,1513248560.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:20.623Z,1513248560.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:20.694Z,1513248560.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:20.998Z,1513248560.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:21.020Z,1513248561.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:21.402Z,1513248561.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:21.417Z,1513248561.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:21.798Z,1513248561.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:21.821Z,1513248561.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:22.202Z,1513248562.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:22.217Z,1513248562.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:22.600Z,1513248562.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:22.631Z,1513248562.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:23.001Z,1513248563.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:23.044Z,1513248563.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:23.418Z,1513248563.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:23.434Z,1513248563.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:23.802Z,1513248563.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:23.839Z,1513248563.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:24.196Z,1513248564.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:24.211Z,1513248564.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:24.602Z,1513248564.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:24.616Z,1513248564.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:25.001Z,1513248565.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:25.017Z,1513248565.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:25.398Z,1513248565.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:25.415Z,1513248565.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:25.801Z,1513248565.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:25.820Z,1513248565.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:26.209Z,1513248566.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:26.255Z,1513248566.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:26.610Z,1513248566.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:26.626Z,1513248566.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:26.996Z,1513248566.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:27.040Z,1513248567.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:27.391Z,1513248567.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:27.426Z,1513248567.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:27.803Z,1513248567.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:27.818Z,1513248567.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:28.191Z,1513248568.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:28.216Z,1513248568.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:28.591Z,1513248568.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:28.618Z,1513248568.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:29.014Z,1513248569.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:29.074Z,1513248569.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:29.415Z,1513248569.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:29.435Z,1513248569.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:29.816Z,1513248569.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:29.831Z,1513248569.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:30.210Z,1513248570.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:30.279Z,1513248570.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:30.599Z,1513248570.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:30.619Z,1513248570.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:31.002Z,1513248571.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:31.040Z,1513248571.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:31.401Z,1513248571.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:31.416Z,1513248571.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:31.802Z,1513248571.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:31.847Z,1513248571.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:32.214Z,1513248572.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:32.257Z,1513248572.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:32.602Z,1513248572.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:32.616Z,1513248572.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:32.994Z,1513248572.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:33.013Z,1513248573.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:33.403Z,1513248573.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:33.418Z,1513248573.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:33.800Z,1513248573.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:33.815Z,1513248573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:34.200Z,1513248574.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:34.215Z,1513248574.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:34.600Z,1513248574.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:34.615Z,1513248574.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:35.021Z,1513248575.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:35.036Z,1513248575.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:35.413Z,1513248575.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:35.428Z,1513248575.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:35.815Z,1513248575.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:35.830Z,1513248575.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:36.196Z,1513248576.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:36.222Z,1513248576.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:36.591Z,1513248576.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:36.738Z,1513248576.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:36.991Z,1513248576.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:37.026Z,1513248577.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:37.391Z,1513248577.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:37.416Z,1513248577.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:37.808Z,1513248577.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:37.826Z,1513248577.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:38.210Z,1513248578.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:38.224Z,1513248578.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:38.613Z,1513248578.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:38.627Z,1513248578.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:38.991Z,1513248578.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:39.023Z,1513248579.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:39.391Z,1513248579.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:39.418Z,1513248579.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:39.796Z,1513248579.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:39.835Z,1513248579.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:40.192Z,1513248580.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:40.243Z,1513248580.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:40.591Z,1513248580.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:40.624Z,1513248580.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:41.011Z,1513248581.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:41.038Z,1513248581.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:41.410Z,1513248581.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:41.434Z,1513248581.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:41.813Z,1513248581.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:41.835Z,1513248581.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:42.191Z,1513248582.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:42.228Z,1513248582.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:42.597Z,1513248582.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:42.628Z,1513248582.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:42.631Z,1513248582.631 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T10:49:42.631Z,1513248582.631 [Default:CheckIn:C.Wait] Stopped
2017-12-14T10:49:42.631Z,1513248582.631 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T10:49:42.632Z,1513248582.632 [Default:CheckIn:D] Running Loop=1
2017-12-14T10:49:42.992Z,1513248582.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:43.090Z,1513248583.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:43.106Z,1513248583.106 [Default:CheckIn:D] Stopped
2017-12-14T10:49:43.106Z,1513248583.106 [Default:CheckIn:E] Running Loop=1
2017-12-14T10:49:43.404Z,1513248583.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:43.438Z,1513248583.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:43.441Z,1513248583.441 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 616.461914 min 
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn:E] Stopped
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn] Stopped
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn](INFO): Running loop #60
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn] Running Loop=60
2017-12-14T10:49:43.442Z,1513248583.442 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T10:49:43.443Z,1513248583.443 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T10:49:47.028Z,1513248587.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:47.051Z,1513248587.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:47.154Z,1513248587.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:47.181Z,1513248587.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:47.529Z,1513248587.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:47.551Z,1513248587.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:47.908Z,1513248587.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:47.946Z,1513248587.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:48.307Z,1513248588.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:48.342Z,1513248588.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:48.767Z,1513248588.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:48.798Z,1513248588.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:49.125Z,1513248589.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:49.151Z,1513248589.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:49.522Z,1513248589.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:49.546Z,1513248589.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:49.906Z,1513248589.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:49.927Z,1513248589.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:50.307Z,1513248590.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:50.372Z,1513248590.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:50.764Z,1513248590.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:50.803Z,1513248590.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:51.122Z,1513248591.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:51.158Z,1513248591.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:51.514Z,1513248591.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:51.529Z,1513248591.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:51.916Z,1513248591.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:51.933Z,1513248591.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:52.311Z,1513248592.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:52.406Z,1513248592.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:52.727Z,1513248592.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:52.742Z,1513248592.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:53.120Z,1513248593.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:53.152Z,1513248593.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:53.521Z,1513248593.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:53.537Z,1513248593.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:53.908Z,1513248593.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:53.934Z,1513248593.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:54.300Z,1513248594.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:54.390Z,1513248594.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:54.723Z,1513248594.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:54.755Z,1513248594.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:55.113Z,1513248595.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:55.128Z,1513248595.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:55.526Z,1513248595.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:55.534Z,1513248595.534 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:49:55.534Z,1513248595.534 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:49:55.534Z,1513248595.534 [BPC1](ERROR): Communications Fault
2017-12-14T10:49:55.587Z,1513248595.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:55.626Z,1513248595.626 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:49:55.907Z,1513248595.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:55.923Z,1513248595.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:56.313Z,1513248596.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:56.412Z,1513248596.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:56.711Z,1513248596.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:56.753Z,1513248596.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:56.783Z,1513248596.783 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:49:56.783Z,1513248596.783 [BPC1] No Fault, FailCount= 1
2017-12-14T10:49:57.112Z,1513248597.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:57.183Z,1513248597.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:57.500Z,1513248597.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:57.527Z,1513248597.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:57.923Z,1513248597.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:58.022Z,1513248598.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:58.343Z,1513248598.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:58.426Z,1513248598.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:58.731Z,1513248598.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:58.775Z,1513248598.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:59.099Z,1513248599.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:59.133Z,1513248599.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:59.500Z,1513248599.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:59.531Z,1513248599.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:49:59.902Z,1513248599.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:49:59.943Z,1513248599.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:00.307Z,1513248600.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:00.337Z,1513248600.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:00.723Z,1513248600.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:00.763Z,1513248600.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:01.117Z,1513248601.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:01.149Z,1513248601.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:01.518Z,1513248601.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:01.532Z,1513248601.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:01.932Z,1513248601.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:01.975Z,1513248601.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:02.308Z,1513248602.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:02.323Z,1513248602.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:02.756Z,1513248602.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:02.788Z,1513248602.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:03.118Z,1513248603.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:03.142Z,1513248603.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:03.526Z,1513248603.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:03.541Z,1513248603.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:03.912Z,1513248603.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:03.927Z,1513248603.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:04.300Z,1513248604.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:04.339Z,1513248604.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:04.756Z,1513248604.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:04.787Z,1513248604.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:05.135Z,1513248605.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:05.159Z,1513248605.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:05.532Z,1513248605.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:05.590Z,1513248605.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:05.901Z,1513248605.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:05.915Z,1513248605.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:06.303Z,1513248606.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:06.395Z,1513248606.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:06.712Z,1513248606.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:06.753Z,1513248606.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:07.108Z,1513248607.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:07.124Z,1513248607.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:07.506Z,1513248607.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:07.521Z,1513248607.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:07.910Z,1513248607.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:07.925Z,1513248607.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:08.392Z,1513248608.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:08.423Z,1513248608.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:08.731Z,1513248608.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:08.747Z,1513248608.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:09.100Z,1513248609.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:09.136Z,1513248609.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:09.499Z,1513248609.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:09.523Z,1513248609.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:09.904Z,1513248609.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:09.941Z,1513248609.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:10.304Z,1513248610.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:10.370Z,1513248610.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:10.713Z,1513248610.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:10.731Z,1513248610.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:11.114Z,1513248611.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:11.178Z,1513248611.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:11.522Z,1513248611.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:11.543Z,1513248611.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:11.900Z,1513248611.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:11.928Z,1513248611.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:12.303Z,1513248612.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:12.423Z,1513248612.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:12.724Z,1513248612.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:12.740Z,1513248612.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:13.125Z,1513248613.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:13.144Z,1513248613.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:13.525Z,1513248613.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:13.540Z,1513248613.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:13.900Z,1513248613.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:13.931Z,1513248613.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:14.303Z,1513248614.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:14.344Z,1513248614.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:14.747Z,1513248614.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:14.772Z,1513248614.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:15.123Z,1513248615.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:15.146Z,1513248615.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:15.526Z,1513248615.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:15.551Z,1513248615.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:15.905Z,1513248615.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:15.937Z,1513248615.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:16.322Z,1513248616.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:16.349Z,1513248616.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:16.754Z,1513248616.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:16.811Z,1513248616.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:17.100Z,1513248617.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:17.130Z,1513248617.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:17.499Z,1513248617.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:17.562Z,1513248617.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:17.958Z,1513248617.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:17.986Z,1513248617.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:18.324Z,1513248618.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:18.376Z,1513248618.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:18.769Z,1513248618.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:18.803Z,1513248618.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:19.105Z,1513248619.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:19.119Z,1513248619.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:19.505Z,1513248619.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:19.520Z,1513248619.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:19.908Z,1513248619.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:19.946Z,1513248619.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:20.305Z,1513248620.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:20.384Z,1513248620.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:20.711Z,1513248620.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:20.736Z,1513248620.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:21.138Z,1513248621.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:21.169Z,1513248621.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:21.521Z,1513248621.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:21.540Z,1513248621.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:21.913Z,1513248621.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:21.927Z,1513248621.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:22.343Z,1513248622.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:22.419Z,1513248622.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:22.719Z,1513248622.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:22.742Z,1513248622.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:23.127Z,1513248623.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:23.142Z,1513248623.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:23.518Z,1513248623.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:23.533Z,1513248623.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:23.899Z,1513248623.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:23.931Z,1513248623.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:24.300Z,1513248624.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:24.420Z,1513248624.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:24.721Z,1513248624.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:24.757Z,1513248624.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:25.117Z,1513248625.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:25.132Z,1513248625.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:25.511Z,1513248625.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:25.525Z,1513248625.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:25.908Z,1513248625.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:25.924Z,1513248625.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:26.353Z,1513248626.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:26.416Z,1513248626.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:26.714Z,1513248626.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:26.734Z,1513248626.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:27.117Z,1513248627.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:27.133Z,1513248627.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:27.527Z,1513248627.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:27.561Z,1513248627.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:27.907Z,1513248627.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:27.929Z,1513248627.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:28.308Z,1513248628.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:28.327Z,1513248628.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:28.709Z,1513248628.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:28.727Z,1513248628.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:29.118Z,1513248629.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:29.134Z,1513248629.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:29.514Z,1513248629.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:29.535Z,1513248629.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:29.922Z,1513248629.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:29.943Z,1513248629.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:30.314Z,1513248630.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:30.329Z,1513248630.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:30.803Z,1513248630.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:30.836Z,1513248630.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:31.099Z,1513248631.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:31.127Z,1513248631.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:31.493Z,1513248631.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:31.517Z,1513248631.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:31.900Z,1513248631.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:31.943Z,1513248631.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:32.307Z,1513248632.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:32.332Z,1513248632.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:32.756Z,1513248632.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:32.798Z,1513248632.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:33.127Z,1513248633.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:33.142Z,1513248633.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:33.524Z,1513248633.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:33.543Z,1513248633.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:33.906Z,1513248633.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:33.933Z,1513248633.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:34.304Z,1513248634.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:34.388Z,1513248634.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:34.721Z,1513248634.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:34.736Z,1513248634.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:35.123Z,1513248635.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:35.138Z,1513248635.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:35.526Z,1513248635.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:35.541Z,1513248635.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:35.914Z,1513248635.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:35.928Z,1513248635.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:36.340Z,1513248636.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:36.406Z,1513248636.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:36.703Z,1513248636.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:36.749Z,1513248636.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:37.163Z,1513248637.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:37.277Z,1513248637.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:37.496Z,1513248637.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:37.523Z,1513248637.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:37.914Z,1513248637.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:37.991Z,1513248637.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:38.364Z,1513248638.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:38.417Z,1513248638.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:38.719Z,1513248638.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:38.748Z,1513248638.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:39.111Z,1513248639.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:39.169Z,1513248639.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:39.499Z,1513248639.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:39.531Z,1513248639.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:39.913Z,1513248639.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:39.971Z,1513248639.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:40.365Z,1513248640.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:40.427Z,1513248640.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:40.714Z,1513248640.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:40.731Z,1513248640.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:41.115Z,1513248641.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:41.136Z,1513248641.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:41.514Z,1513248641.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:41.530Z,1513248641.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:41.915Z,1513248641.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:41.962Z,1513248641.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:42.299Z,1513248642.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:42.321Z,1513248642.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:42.725Z,1513248642.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:42.740Z,1513248642.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:43.124Z,1513248643.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:43.147Z,1513248643.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:43.523Z,1513248643.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:43.538Z,1513248643.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:46.982Z,1513248646.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:46.997Z,1513248646.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:47.097Z,1513248647.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:47.129Z,1513248647.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:47.497Z,1513248647.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:47.523Z,1513248647.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:47.898Z,1513248647.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:47.934Z,1513248647.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:48.288Z,1513248648.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:48.376Z,1513248648.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:48.687Z,1513248648.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:48.707Z,1513248648.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:49.087Z,1513248649.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:49.101Z,1513248649.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:49.494Z,1513248649.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:49.508Z,1513248649.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:49.904Z,1513248649.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:49.924Z,1513248649.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:50.299Z,1513248650.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:50.410Z,1513248650.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:50.694Z,1513248650.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:50.710Z,1513248650.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:51.083Z,1513248651.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:51.115Z,1513248651.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:51.480Z,1513248651.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:51.508Z,1513248651.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:51.895Z,1513248651.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:51.912Z,1513248651.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:52.278Z,1513248652.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:52.358Z,1513248652.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:52.705Z,1513248652.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:52.723Z,1513248652.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:53.119Z,1513248653.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:53.139Z,1513248653.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:53.511Z,1513248653.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:53.527Z,1513248653.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:53.891Z,1513248653.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:53.922Z,1513248653.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:54.280Z,1513248654.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:54.382Z,1513248654.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:54.382Z,1513248654.382 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206
2017-12-14T10:50:54.382Z,1513248654.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:50:54.384Z,1513248654.384 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:54.384Z,1513248654.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 206
2017-12-14T10:50:54.384Z,1513248654.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:50:54.395Z,1513248654.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:54.395Z,1513248654.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206
2017-12-14T10:50:54.395Z,1513248654.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:50:54.424Z,1513248654.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:50:54.424Z,1513248654.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:50:54.424Z,1513248654.424 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:50:54.718Z,1513248654.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:54.744Z,1513248654.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:50:54.744Z,1513248654.744 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206
2017-12-14T10:50:54.744Z,1513248654.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:50:54.744Z,1513248654.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 206
2017-12-14T10:50:54.746Z,1513248654.746 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:50:54.746Z,1513248654.746 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206
2017-12-14T10:50:55.103Z,1513248655.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:55.130Z,1513248655.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:50:55.130Z,1513248655.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:50:55.131Z,1513248655.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:50:55.131Z,1513248655.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:50:55.131Z,1513248655.131 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:50:55.132Z,1513248655.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:50:55.132Z,1513248655.132 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:50:55.132Z,1513248655.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:50:55.133Z,1513248655.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:50:55.490Z,1513248655.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:55.505Z,1513248655.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:55.886Z,1513248655.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:55.900Z,1513248655.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:56.294Z,1513248656.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:56.441Z,1513248656.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:56.708Z,1513248656.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:56.723Z,1513248656.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:57.106Z,1513248657.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:57.121Z,1513248657.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:57.506Z,1513248657.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:57.527Z,1513248657.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:57.892Z,1513248657.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:57.908Z,1513248657.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:58.280Z,1513248658.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:58.305Z,1513248658.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:58.760Z,1513248658.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:58.823Z,1513248658.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:59.102Z,1513248659.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:59.123Z,1513248659.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:59.502Z,1513248659.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:59.516Z,1513248659.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:50:59.881Z,1513248659.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:50:59.940Z,1513248659.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:00.284Z,1513248660.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:00.335Z,1513248660.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:00.748Z,1513248660.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:00.791Z,1513248660.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:01.104Z,1513248661.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:01.123Z,1513248661.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:01.494Z,1513248661.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:01.551Z,1513248661.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:01.879Z,1513248661.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:01.904Z,1513248661.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:02.279Z,1513248662.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:02.376Z,1513248662.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:02.726Z,1513248662.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:02.769Z,1513248662.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:03.117Z,1513248663.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:03.139Z,1513248663.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:03.504Z,1513248663.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:03.519Z,1513248663.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:03.884Z,1513248663.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:03.915Z,1513248663.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:04.285Z,1513248664.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:04.375Z,1513248664.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:04.702Z,1513248664.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:04.734Z,1513248664.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:05.094Z,1513248665.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:05.124Z,1513248665.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:05.498Z,1513248665.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:05.512Z,1513248665.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:05.928Z,1513248665.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:05.976Z,1513248665.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:06.283Z,1513248666.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:06.337Z,1513248666.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:06.697Z,1513248666.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:06.715Z,1513248666.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:07.101Z,1513248667.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:07.123Z,1513248667.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:07.500Z,1513248667.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:07.515Z,1513248667.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:07.888Z,1513248667.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:07.910Z,1513248667.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:08.287Z,1513248668.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:08.371Z,1513248668.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:08.690Z,1513248668.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:08.720Z,1513248668.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:09.106Z,1513248669.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:09.140Z,1513248669.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:09.490Z,1513248669.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:09.512Z,1513248669.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:09.885Z,1513248669.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:09.901Z,1513248669.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:10.284Z,1513248670.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:10.299Z,1513248670.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:10.708Z,1513248670.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:10.775Z,1513248670.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:11.102Z,1513248671.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:11.133Z,1513248671.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:11.489Z,1513248671.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:11.511Z,1513248671.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:11.885Z,1513248671.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:11.901Z,1513248671.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:12.305Z,1513248672.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:12.338Z,1513248672.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:12.739Z,1513248672.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:12.779Z,1513248672.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:13.097Z,1513248673.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:13.125Z,1513248673.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:13.490Z,1513248673.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:13.517Z,1513248673.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:13.888Z,1513248673.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:13.903Z,1513248673.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:14.288Z,1513248674.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:14.315Z,1513248674.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:14.740Z,1513248674.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:14.779Z,1513248674.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:15.103Z,1513248675.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:15.123Z,1513248675.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:15.510Z,1513248675.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:15.551Z,1513248675.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:15.899Z,1513248675.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:15.920Z,1513248675.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:16.292Z,1513248676.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:16.384Z,1513248676.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:16.701Z,1513248676.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:16.719Z,1513248676.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:17.095Z,1513248677.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:17.120Z,1513248677.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:17.500Z,1513248677.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:17.514Z,1513248677.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:17.887Z,1513248677.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:17.919Z,1513248677.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:18.286Z,1513248678.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:18.301Z,1513248678.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:18.711Z,1513248678.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:18.735Z,1513248678.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:19.122Z,1513248679.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:19.159Z,1513248679.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:19.520Z,1513248679.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:19.536Z,1513248679.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:19.885Z,1513248679.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:19.942Z,1513248679.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:20.296Z,1513248680.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:20.396Z,1513248680.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:20.699Z,1513248680.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:20.727Z,1513248680.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:21.158Z,1513248681.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:21.179Z,1513248681.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:21.517Z,1513248681.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:21.603Z,1513248681.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:21.926Z,1513248681.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:21.968Z,1513248681.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:22.337Z,1513248682.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:22.429Z,1513248682.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:22.722Z,1513248682.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:22.823Z,1513248682.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:23.095Z,1513248683.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:23.119Z,1513248683.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:23.502Z,1513248683.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:23.550Z,1513248683.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:23.904Z,1513248683.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:23.967Z,1513248683.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:24.279Z,1513248684.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:24.308Z,1513248684.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:24.731Z,1513248684.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:24.791Z,1513248684.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:25.125Z,1513248685.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:25.179Z,1513248685.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:25.487Z,1513248685.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:25.506Z,1513248685.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:25.887Z,1513248685.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:25.904Z,1513248685.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:26.274Z,1513248686.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:26.312Z,1513248686.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:26.764Z,1513248686.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:26.817Z,1513248686.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:27.098Z,1513248687.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:27.132Z,1513248687.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:27.500Z,1513248687.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:27.515Z,1513248687.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:27.887Z,1513248687.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:27.935Z,1513248687.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:28.281Z,1513248688.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:28.317Z,1513248688.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:28.758Z,1513248688.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:28.806Z,1513248688.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:29.090Z,1513248689.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:29.105Z,1513248689.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:29.514Z,1513248689.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:29.543Z,1513248689.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:29.896Z,1513248689.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:29.911Z,1513248689.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:30.286Z,1513248690.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:30.340Z,1513248690.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:30.746Z,1513248690.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:30.784Z,1513248690.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:31.094Z,1513248691.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:31.120Z,1513248691.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:31.497Z,1513248691.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:31.583Z,1513248691.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:31.893Z,1513248691.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:31.944Z,1513248691.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:32.295Z,1513248692.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:32.415Z,1513248692.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:32.704Z,1513248692.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:32.727Z,1513248692.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:33.106Z,1513248693.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:33.165Z,1513248693.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:33.506Z,1513248693.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:33.536Z,1513248693.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:33.890Z,1513248693.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:33.934Z,1513248693.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:34.280Z,1513248694.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:34.391Z,1513248694.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:34.707Z,1513248694.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:34.761Z,1513248694.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:35.108Z,1513248695.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:35.164Z,1513248695.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:35.508Z,1513248695.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:35.553Z,1513248695.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:35.882Z,1513248695.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:35.962Z,1513248695.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:36.373Z,1513248696.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:36.414Z,1513248696.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:36.706Z,1513248696.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:36.762Z,1513248696.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:37.109Z,1513248697.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:37.164Z,1513248697.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:37.492Z,1513248697.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:37.526Z,1513248697.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:37.927Z,1513248697.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:37.988Z,1513248697.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:38.299Z,1513248698.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:38.342Z,1513248698.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:38.705Z,1513248698.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:38.753Z,1513248698.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:39.128Z,1513248699.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:39.171Z,1513248699.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:39.503Z,1513248699.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:39.568Z,1513248699.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:39.887Z,1513248699.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:39.923Z,1513248699.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:40.303Z,1513248700.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:40.363Z,1513248700.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:40.748Z,1513248700.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:40.795Z,1513248700.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:41.109Z,1513248701.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:41.136Z,1513248701.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:41.507Z,1513248701.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:41.551Z,1513248701.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:41.905Z,1513248701.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:41.943Z,1513248701.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:42.290Z,1513248702.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:42.321Z,1513248702.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:42.792Z,1513248702.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:42.948Z,1513248702.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:43.108Z,1513248703.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:43.199Z,1513248703.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:43.508Z,1513248703.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:43.528Z,1513248703.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:43.882Z,1513248703.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:43.975Z,1513248703.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:50.494Z,1513248710.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:50.504Z,1513248710.504 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:51:50.504Z,1513248710.504 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:51:50.504Z,1513248710.504 [BPC1](ERROR): Communications Fault
2017-12-14T10:51:50.512Z,1513248710.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:50.526Z,1513248710.526 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:51:50.638Z,1513248710.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:50.678Z,1513248710.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:50.982Z,1513248710.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:51.013Z,1513248711.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:51.385Z,1513248711.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:51.421Z,1513248711.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:51.434Z,1513248711.434 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:51:51.434Z,1513248711.434 [BPC1] No Fault, FailCount= 1
2017-12-14T10:51:51.766Z,1513248711.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:51.860Z,1513248711.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:52.170Z,1513248712.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:52.185Z,1513248712.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:52.570Z,1513248712.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:52.584Z,1513248712.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:52.976Z,1513248712.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:53.022Z,1513248713.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:53.376Z,1513248713.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:53.392Z,1513248713.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:53.773Z,1513248713.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:53.799Z,1513248713.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:54.167Z,1513248714.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:54.196Z,1513248714.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:54.571Z,1513248714.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:54.596Z,1513248714.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:54.969Z,1513248714.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:54.984Z,1513248714.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:55.360Z,1513248715.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:55.383Z,1513248715.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:55.782Z,1513248715.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:55.813Z,1513248715.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:56.228Z,1513248716.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:56.286Z,1513248716.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:56.572Z,1513248716.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:56.592Z,1513248716.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:56.966Z,1513248716.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:56.989Z,1513248716.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:57.359Z,1513248717.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:57.387Z,1513248717.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:57.756Z,1513248717.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:57.782Z,1513248717.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:58.159Z,1513248718.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:58.184Z,1513248718.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:58.559Z,1513248718.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:58.593Z,1513248718.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:58.982Z,1513248718.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:59.031Z,1513248719.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:59.412Z,1513248719.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:59.449Z,1513248719.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:51:59.782Z,1513248719.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:51:59.797Z,1513248719.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:00.159Z,1513248720.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:00.230Z,1513248720.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:00.559Z,1513248720.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:00.584Z,1513248720.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:00.960Z,1513248720.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:00.995Z,1513248720.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:01.362Z,1513248721.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:01.390Z,1513248721.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:01.774Z,1513248721.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:01.805Z,1513248721.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:02.182Z,1513248722.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:02.205Z,1513248722.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:02.593Z,1513248722.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:02.619Z,1513248722.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:02.959Z,1513248722.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:02.994Z,1513248722.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:03.359Z,1513248723.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:03.396Z,1513248723.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:03.757Z,1513248723.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:03.772Z,1513248723.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:04.165Z,1513248724.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:04.196Z,1513248724.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:04.566Z,1513248724.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:04.593Z,1513248724.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:04.977Z,1513248724.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:05.010Z,1513248725.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:05.377Z,1513248725.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:05.404Z,1513248725.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:05.814Z,1513248725.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:05.864Z,1513248725.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:06.166Z,1513248726.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:06.181Z,1513248726.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:06.570Z,1513248726.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:06.584Z,1513248726.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:06.968Z,1513248726.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:06.984Z,1513248726.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:07.367Z,1513248727.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:07.387Z,1513248727.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:07.781Z,1513248727.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:07.813Z,1513248727.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:08.178Z,1513248728.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:08.209Z,1513248728.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:08.575Z,1513248728.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:08.595Z,1513248728.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:08.967Z,1513248728.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:09.043Z,1513248729.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:09.364Z,1513248729.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:09.400Z,1513248729.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:09.764Z,1513248729.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:09.780Z,1513248729.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:10.164Z,1513248730.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:10.183Z,1513248730.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:10.567Z,1513248730.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:10.581Z,1513248730.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:11.078Z,1513248731.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:11.135Z,1513248731.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:11.382Z,1513248731.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:11.423Z,1513248731.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:11.777Z,1513248731.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:11.831Z,1513248731.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:12.183Z,1513248732.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:12.222Z,1513248732.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:12.568Z,1513248732.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:12.623Z,1513248732.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:12.974Z,1513248732.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:12.989Z,1513248732.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:13.359Z,1513248733.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:13.418Z,1513248733.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:13.776Z,1513248733.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:13.792Z,1513248733.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:14.177Z,1513248734.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:14.191Z,1513248734.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:14.577Z,1513248734.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:14.591Z,1513248734.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:14.968Z,1513248734.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:14.987Z,1513248734.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:15.370Z,1513248735.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:15.384Z,1513248735.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:15.760Z,1513248735.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:15.786Z,1513248735.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:16.160Z,1513248736.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:16.199Z,1513248736.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:16.559Z,1513248736.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:16.588Z,1513248736.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:16.978Z,1513248736.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:17.001Z,1513248737.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:17.382Z,1513248737.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:17.397Z,1513248737.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:17.787Z,1513248737.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:17.801Z,1513248737.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:18.159Z,1513248738.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:18.203Z,1513248738.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:18.559Z,1513248738.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:18.615Z,1513248738.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:18.968Z,1513248738.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:18.997Z,1513248738.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:19.356Z,1513248739.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:19.375Z,1513248739.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:19.777Z,1513248739.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:19.801Z,1513248739.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:20.173Z,1513248740.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:20.203Z,1513248740.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:20.578Z,1513248740.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:20.601Z,1513248740.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:20.964Z,1513248740.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:20.984Z,1513248740.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:21.366Z,1513248741.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:21.380Z,1513248741.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:21.778Z,1513248741.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:21.823Z,1513248741.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:22.168Z,1513248742.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:22.187Z,1513248742.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:22.573Z,1513248742.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:22.587Z,1513248742.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:22.981Z,1513248742.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:23.003Z,1513248743.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:23.383Z,1513248743.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:23.398Z,1513248743.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:23.780Z,1513248743.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:23.818Z,1513248743.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:24.160Z,1513248744.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:24.191Z,1513248744.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:24.560Z,1513248744.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:24.595Z,1513248744.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:24.959Z,1513248744.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:25.027Z,1513248745.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:25.359Z,1513248745.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:25.402Z,1513248745.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:25.782Z,1513248745.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:25.805Z,1513248745.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:26.185Z,1513248746.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:26.200Z,1513248746.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:26.589Z,1513248746.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:26.661Z,1513248746.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:26.963Z,1513248746.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:27.002Z,1513248747.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:27.371Z,1513248747.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:27.398Z,1513248747.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:27.756Z,1513248747.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:27.771Z,1513248747.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:28.204Z,1513248748.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:28.248Z,1513248748.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:28.564Z,1513248748.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:28.579Z,1513248748.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:28.982Z,1513248748.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:29.006Z,1513248749.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:29.383Z,1513248749.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:29.417Z,1513248749.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:29.777Z,1513248749.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:29.792Z,1513248749.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:30.169Z,1513248750.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:30.184Z,1513248750.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:30.562Z,1513248750.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:30.585Z,1513248750.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:30.971Z,1513248750.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:30.986Z,1513248750.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:31.370Z,1513248751.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:31.395Z,1513248751.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:31.779Z,1513248751.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:31.794Z,1513248751.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:32.182Z,1513248752.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:32.198Z,1513248752.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:32.585Z,1513248752.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:32.607Z,1513248752.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:32.960Z,1513248752.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:32.991Z,1513248752.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:33.436Z,1513248753.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:33.465Z,1513248753.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:33.763Z,1513248753.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:33.843Z,1513248753.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:34.164Z,1513248754.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:34.197Z,1513248754.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:34.596Z,1513248754.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:34.660Z,1513248754.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:34.983Z,1513248754.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:35.008Z,1513248755.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:35.382Z,1513248755.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:35.435Z,1513248755.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:35.781Z,1513248755.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:35.811Z,1513248755.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:36.172Z,1513248756.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:36.212Z,1513248756.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:36.567Z,1513248756.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:36.583Z,1513248756.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:36.968Z,1513248756.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:37.024Z,1513248757.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:37.371Z,1513248757.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:37.391Z,1513248757.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:37.811Z,1513248757.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:37.843Z,1513248757.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:37.910Z,1513248757.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:38.182Z,1513248758.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:38.203Z,1513248758.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:38.571Z,1513248758.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:38.598Z,1513248758.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:38.707Z,1513248758.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:38.980Z,1513248758.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:38.999Z,1513248758.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:39.125Z,1513248759.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:39.371Z,1513248759.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:39.386Z,1513248759.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:39.753Z,1513248759.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:39.786Z,1513248759.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:40.159Z,1513248760.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:40.193Z,1513248760.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:40.575Z,1513248760.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:40.682Z,1513248760.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:40.983Z,1513248760.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:41.026Z,1513248761.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:41.373Z,1513248761.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:41.399Z,1513248761.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:41.783Z,1513248761.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:41.797Z,1513248761.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:42.163Z,1513248762.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:42.194Z,1513248762.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:42.584Z,1513248762.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:42.603Z,1513248762.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:42.961Z,1513248762.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:42.985Z,1513248762.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:43.357Z,1513248763.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:43.395Z,1513248763.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:43.773Z,1513248763.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:43.828Z,1513248763.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:44.215Z,1513248764.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:44.270Z,1513248764.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:47.625Z,1513248767.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:47.658Z,1513248767.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:47.767Z,1513248767.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:47.814Z,1513248767.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:48.119Z,1513248768.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:48.134Z,1513248768.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:48.516Z,1513248768.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:48.535Z,1513248768.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:48.913Z,1513248768.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:48.929Z,1513248768.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:49.312Z,1513248769.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:49.326Z,1513248769.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:49.725Z,1513248769.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:49.740Z,1513248769.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:50.129Z,1513248770.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:50.144Z,1513248770.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:50.522Z,1513248770.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:50.536Z,1513248770.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:50.908Z,1513248770.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:50.935Z,1513248770.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:51.319Z,1513248771.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:51.334Z,1513248771.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:51.728Z,1513248771.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:51.754Z,1513248771.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:52.133Z,1513248772.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:52.148Z,1513248772.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:52.526Z,1513248772.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:52.553Z,1513248772.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:52.908Z,1513248772.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:52.937Z,1513248772.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:53.307Z,1513248773.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:53.334Z,1513248773.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:53.722Z,1513248773.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:53.752Z,1513248773.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:54.138Z,1513248774.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:54.152Z,1513248774.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:54.527Z,1513248774.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:54.542Z,1513248774.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:54.910Z,1513248774.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:54.943Z,1513248774.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:55.312Z,1513248775.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:55.340Z,1513248775.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:55.722Z,1513248775.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:55.799Z,1513248775.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:56.126Z,1513248776.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:56.156Z,1513248776.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:56.531Z,1513248776.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:56.588Z,1513248776.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:56.907Z,1513248776.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:56.943Z,1513248776.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:57.320Z,1513248777.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:57.394Z,1513248777.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:57.708Z,1513248777.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:57.723Z,1513248777.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:58.112Z,1513248778.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:58.148Z,1513248778.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:58.519Z,1513248778.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:58.557Z,1513248778.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:58.926Z,1513248778.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:58.960Z,1513248778.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:59.325Z,1513248779.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:59.352Z,1513248779.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:52:59.725Z,1513248779.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:52:59.754Z,1513248779.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:00.177Z,1513248780.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:00.247Z,1513248780.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:00.514Z,1513248780.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:00.540Z,1513248780.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:00.919Z,1513248780.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:00.933Z,1513248780.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:01.318Z,1513248781.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:01.332Z,1513248781.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:01.715Z,1513248781.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:01.730Z,1513248781.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:02.131Z,1513248782.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:02.159Z,1513248782.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:02.529Z,1513248782.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:02.561Z,1513248782.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:02.918Z,1513248782.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:02.961Z,1513248782.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:03.338Z,1513248783.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:03.375Z,1513248783.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:03.718Z,1513248783.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:03.739Z,1513248783.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:04.120Z,1513248784.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:04.143Z,1513248784.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:04.519Z,1513248784.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:04.535Z,1513248784.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:04.922Z,1513248784.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:04.937Z,1513248784.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:05.322Z,1513248785.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:05.337Z,1513248785.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:05.721Z,1513248785.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:05.771Z,1513248785.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:06.120Z,1513248786.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:06.136Z,1513248786.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:06.559Z,1513248786.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:06.579Z,1513248786.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:06.908Z,1513248786.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:06.947Z,1513248786.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:07.311Z,1513248787.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:07.355Z,1513248787.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:07.722Z,1513248787.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:07.749Z,1513248787.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:08.121Z,1513248788.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:08.154Z,1513248788.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:08.522Z,1513248788.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:08.550Z,1513248788.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:08.911Z,1513248788.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:08.928Z,1513248788.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:09.319Z,1513248789.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:09.353Z,1513248789.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:09.709Z,1513248789.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:09.723Z,1513248789.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:10.128Z,1513248790.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:10.157Z,1513248790.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:10.515Z,1513248790.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:10.529Z,1513248790.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:10.930Z,1513248790.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:10.956Z,1513248790.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:11.334Z,1513248791.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:11.363Z,1513248791.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:11.725Z,1513248791.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:11.758Z,1513248791.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:12.115Z,1513248792.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:12.130Z,1513248792.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:12.515Z,1513248792.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:12.530Z,1513248792.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:12.913Z,1513248792.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:12.932Z,1513248792.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:13.322Z,1513248793.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:13.336Z,1513248793.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:13.730Z,1513248793.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:13.751Z,1513248793.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:14.130Z,1513248794.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:14.145Z,1513248794.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:14.530Z,1513248794.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:14.552Z,1513248794.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:14.908Z,1513248794.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:14.942Z,1513248794.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:15.307Z,1513248795.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:15.339Z,1513248795.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:15.728Z,1513248795.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:15.747Z,1513248795.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:16.155Z,1513248796.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:16.188Z,1513248796.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:16.543Z,1513248796.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:16.558Z,1513248796.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:16.912Z,1513248796.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:16.946Z,1513248796.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:17.312Z,1513248797.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:17.363Z,1513248797.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:17.717Z,1513248797.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:17.778Z,1513248797.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:18.122Z,1513248798.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:18.137Z,1513248798.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:18.522Z,1513248798.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:18.575Z,1513248798.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:18.921Z,1513248798.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:18.958Z,1513248798.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:19.361Z,1513248799.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:19.434Z,1513248799.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:19.724Z,1513248799.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:19.744Z,1513248799.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:20.113Z,1513248800.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:20.136Z,1513248800.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:20.517Z,1513248800.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:20.532Z,1513248800.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:20.914Z,1513248800.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:20.936Z,1513248800.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:21.313Z,1513248801.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:21.333Z,1513248801.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:21.729Z,1513248801.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:21.748Z,1513248801.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:22.126Z,1513248802.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:22.147Z,1513248802.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:22.558Z,1513248802.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:22.583Z,1513248802.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:22.930Z,1513248802.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:22.945Z,1513248802.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:23.321Z,1513248803.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:23.336Z,1513248803.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:23.725Z,1513248803.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:23.741Z,1513248803.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:24.129Z,1513248804.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:24.144Z,1513248804.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:24.526Z,1513248804.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:24.540Z,1513248804.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:24.908Z,1513248804.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:24.943Z,1513248804.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:25.308Z,1513248805.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:25.339Z,1513248805.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:25.745Z,1513248805.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:25.785Z,1513248805.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:26.121Z,1513248806.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:26.152Z,1513248806.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:26.531Z,1513248806.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:26.551Z,1513248806.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:26.911Z,1513248806.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:26.942Z,1513248806.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:27.307Z,1513248807.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:27.338Z,1513248807.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:27.712Z,1513248807.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:27.763Z,1513248807.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:28.105Z,1513248808.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:28.120Z,1513248808.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:28.515Z,1513248808.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:28.543Z,1513248808.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:28.941Z,1513248808.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:28.969Z,1513248808.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:29.329Z,1513248809.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:29.360Z,1513248809.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:29.729Z,1513248809.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:29.744Z,1513248809.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:30.118Z,1513248810.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:30.132Z,1513248810.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:30.515Z,1513248810.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:30.535Z,1513248810.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:30.910Z,1513248810.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:30.943Z,1513248810.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:31.320Z,1513248811.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:31.339Z,1513248811.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:31.724Z,1513248811.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:31.743Z,1513248811.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:32.172Z,1513248812.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:32.196Z,1513248812.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:32.528Z,1513248812.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:32.555Z,1513248812.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:32.907Z,1513248812.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:32.941Z,1513248812.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:33.307Z,1513248813.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:33.338Z,1513248813.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:33.711Z,1513248813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:33.742Z,1513248813.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:33.897Z,1513248813.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:34.108Z,1513248814.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:34.146Z,1513248814.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:34.511Z,1513248814.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:34.542Z,1513248814.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:34.696Z,1513248814.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:34.922Z,1513248814.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:34.955Z,1513248814.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:35.109Z,1513248815.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:35.348Z,1513248815.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:35.379Z,1513248815.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:35.729Z,1513248815.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:35.756Z,1513248815.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:35.906Z,1513248815.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:36.117Z,1513248816.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:36.131Z,1513248816.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:36.518Z,1513248816.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:36.533Z,1513248816.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:36.702Z,1513248816.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:36.918Z,1513248816.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:36.933Z,1513248816.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:37.352Z,1513248817.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:37.376Z,1513248817.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:37.499Z,1513248817.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:37.721Z,1513248817.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:37.740Z,1513248817.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:37.905Z,1513248817.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:38.125Z,1513248818.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:38.141Z,1513248818.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:38.538Z,1513248818.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:38.563Z,1513248818.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:38.702Z,1513248818.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:38.930Z,1513248818.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:38.946Z,1513248818.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:39.105Z,1513248819.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:39.320Z,1513248819.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:39.344Z,1513248819.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:39.721Z,1513248819.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:39.782Z,1513248819.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:39.901Z,1513248819.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:40.108Z,1513248820.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:40.186Z,1513248820.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:40.507Z,1513248820.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:40.532Z,1513248820.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:40.697Z,1513248820.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:40.939Z,1513248820.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:40.960Z,1513248820.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:41.101Z,1513248821.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:41.333Z,1513248821.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:41.390Z,1513248821.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:41.755Z,1513248821.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:41.784Z,1513248821.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:41.898Z,1513248821.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:42.114Z,1513248822.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:42.163Z,1513248822.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:42.515Z,1513248822.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:42.545Z,1513248822.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:42.693Z,1513248822.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:42.914Z,1513248822.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:42.929Z,1513248822.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:43.097Z,1513248823.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:43.315Z,1513248823.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:43.331Z,1513248823.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:43.727Z,1513248823.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:43.754Z,1513248823.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:43.895Z,1513248823.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:44.121Z,1513248824.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:44.138Z,1513248824.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:44.521Z,1513248824.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:44.543Z,1513248824.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:44.689Z,1513248824.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:45.096Z,1513248825.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:45.890Z,1513248825.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:46.687Z,1513248826.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:47.121Z,1513248827.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:47.917Z,1513248827.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:47.986Z,1513248827.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:48.009Z,1513248828.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:48.112Z,1513248828.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:48.155Z,1513248828.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:48.489Z,1513248828.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:48.539Z,1513248828.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:48.715Z,1513248828.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:48.885Z,1513248828.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:48.900Z,1513248828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:49.270Z,1513248829.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:49.284Z,1513248829.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:49.510Z,1513248829.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:49.659Z,1513248829.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:49.693Z,1513248829.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:49.913Z,1513248829.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:50.073Z,1513248830.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:50.088Z,1513248830.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:50.459Z,1513248830.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:50.530Z,1513248830.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:50.711Z,1513248830.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:50.882Z,1513248830.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:50.897Z,1513248830.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:51.117Z,1513248831.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:51.282Z,1513248831.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:51.307Z,1513248831.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:51.684Z,1513248831.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:51.707Z,1513248831.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:51.917Z,1513248831.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:52.063Z,1513248832.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:52.099Z,1513248832.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:52.494Z,1513248832.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:52.531Z,1513248832.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:52.716Z,1513248832.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:52.900Z,1513248832.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:52.932Z,1513248832.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:53.121Z,1513248833.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:53.259Z,1513248833.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:53.287Z,1513248833.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:53.684Z,1513248833.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:53.703Z,1513248833.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:53.917Z,1513248833.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:54.081Z,1513248834.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:54.095Z,1513248834.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:54.479Z,1513248834.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:54.499Z,1513248834.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:54.716Z,1513248834.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:54.860Z,1513248834.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:54.896Z,1513248834.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:55.121Z,1513248835.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:55.263Z,1513248835.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:55.289Z,1513248835.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:55.289Z,1513248835.289 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207
2017-12-14T10:53:55.289Z,1513248835.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:53:55.291Z,1513248835.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:55.291Z,1513248835.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 207
2017-12-14T10:53:55.291Z,1513248835.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:53:55.293Z,1513248835.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:55.293Z,1513248835.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207
2017-12-14T10:53:55.293Z,1513248835.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:53:55.305Z,1513248835.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:53:55.305Z,1513248835.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:53:55.306Z,1513248835.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:53:55.712Z,1513248835.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:55.786Z,1513248835.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:53:55.786Z,1513248835.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207
2017-12-14T10:53:55.786Z,1513248835.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:53:55.786Z,1513248835.786 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 207
2017-12-14T10:53:55.787Z,1513248835.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:53:55.787Z,1513248835.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207
2017-12-14T10:53:55.918Z,1513248835.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:56.073Z,1513248836.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:56.095Z,1513248836.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:53:56.096Z,1513248836.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:53:56.096Z,1513248836.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:53:56.096Z,1513248836.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:53:56.097Z,1513248836.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:53:56.097Z,1513248836.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:53:56.109Z,1513248836.109 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:53:56.109Z,1513248836.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:53:56.110Z,1513248836.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:53:56.471Z,1513248836.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:56.507Z,1513248836.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:56.713Z,1513248836.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:56.864Z,1513248836.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:56.884Z,1513248836.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:57.117Z,1513248837.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:57.263Z,1513248837.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:57.283Z,1513248837.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:57.670Z,1513248837.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:57.685Z,1513248837.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:57.914Z,1513248837.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:58.082Z,1513248838.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:58.096Z,1513248838.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:58.481Z,1513248838.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:58.496Z,1513248838.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:58.711Z,1513248838.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:58.862Z,1513248838.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:58.932Z,1513248838.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:59.117Z,1513248839.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:59.259Z,1513248839.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:59.287Z,1513248839.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:59.682Z,1513248839.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:53:59.698Z,1513248839.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:53:59.917Z,1513248839.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:00.085Z,1513248840.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:00.100Z,1513248840.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:00.483Z,1513248840.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:00.498Z,1513248840.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:00.716Z,1513248840.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:00.860Z,1513248840.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:00.887Z,1513248840.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:01.121Z,1513248841.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:01.260Z,1513248841.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:01.286Z,1513248841.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:01.675Z,1513248841.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:01.697Z,1513248841.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:01.918Z,1513248841.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:02.084Z,1513248842.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:02.134Z,1513248842.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:02.478Z,1513248842.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:02.555Z,1513248842.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:02.715Z,1513248842.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:02.859Z,1513248842.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:02.879Z,1513248842.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:03.122Z,1513248843.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:03.261Z,1513248843.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:03.276Z,1513248843.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:03.678Z,1513248843.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:03.746Z,1513248843.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:03.918Z,1513248843.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:04.078Z,1513248844.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:04.101Z,1513248844.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:04.477Z,1513248844.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:04.531Z,1513248844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:04.713Z,1513248844.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:04.866Z,1513248844.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:04.881Z,1513248844.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:05.118Z,1513248845.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:05.307Z,1513248845.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:05.355Z,1513248845.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:05.677Z,1513248845.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:05.712Z,1513248845.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:05.913Z,1513248845.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:06.074Z,1513248846.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:06.105Z,1513248846.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:06.483Z,1513248846.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:06.512Z,1513248846.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:06.709Z,1513248846.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:06.869Z,1513248846.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:06.892Z,1513248846.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:07.113Z,1513248847.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:07.269Z,1513248847.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:07.283Z,1513248847.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:07.674Z,1513248847.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:07.688Z,1513248847.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:07.910Z,1513248847.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:08.077Z,1513248848.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:08.091Z,1513248848.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:08.476Z,1513248848.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:08.491Z,1513248848.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:08.706Z,1513248848.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:08.869Z,1513248848.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:08.884Z,1513248848.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:09.109Z,1513248849.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:09.269Z,1513248849.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:09.283Z,1513248849.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:09.679Z,1513248849.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:09.694Z,1513248849.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:09.906Z,1513248849.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:10.075Z,1513248850.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:10.110Z,1513248850.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:10.479Z,1513248850.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:10.493Z,1513248850.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:10.703Z,1513248850.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:10.864Z,1513248850.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:10.910Z,1513248850.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:11.105Z,1513248851.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:11.272Z,1513248851.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:11.288Z,1513248851.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:11.711Z,1513248851.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:11.771Z,1513248851.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:11.904Z,1513248851.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:12.071Z,1513248852.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:12.090Z,1513248852.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:12.485Z,1513248852.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:12.503Z,1513248852.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:12.697Z,1513248852.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:12.867Z,1513248852.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:12.926Z,1513248852.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:13.101Z,1513248853.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:13.274Z,1513248853.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:13.296Z,1513248853.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:13.682Z,1513248853.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:13.700Z,1513248853.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:13.898Z,1513248853.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:14.081Z,1513248854.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:14.097Z,1513248854.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:14.481Z,1513248854.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:14.496Z,1513248854.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:14.695Z,1513248854.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:14.919Z,1513248854.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:14.943Z,1513248854.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:15.111Z,1513248855.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:15.261Z,1513248855.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:15.301Z,1513248855.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:15.675Z,1513248855.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:15.705Z,1513248855.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:15.906Z,1513248855.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:16.086Z,1513248856.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:16.107Z,1513248856.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:16.483Z,1513248856.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:16.499Z,1513248856.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:16.703Z,1513248856.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:16.860Z,1513248856.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:16.886Z,1513248856.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:17.125Z,1513248857.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:17.275Z,1513248857.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:17.304Z,1513248857.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:17.687Z,1513248857.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:17.707Z,1513248857.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:17.921Z,1513248857.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:18.067Z,1513248858.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:18.119Z,1513248858.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:18.478Z,1513248858.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:18.496Z,1513248858.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:18.721Z,1513248858.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:18.860Z,1513248858.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:18.891Z,1513248858.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:19.125Z,1513248859.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:19.259Z,1513248859.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:19.294Z,1513248859.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:19.677Z,1513248859.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:19.699Z,1513248859.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:19.922Z,1513248859.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:20.083Z,1513248860.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:20.103Z,1513248860.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:20.478Z,1513248860.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:20.499Z,1513248860.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:20.719Z,1513248860.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:20.859Z,1513248860.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:20.895Z,1513248860.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:21.125Z,1513248861.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:21.290Z,1513248861.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:21.338Z,1513248861.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:21.686Z,1513248861.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:21.716Z,1513248861.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:21.922Z,1513248861.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:22.081Z,1513248862.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:22.115Z,1513248862.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:22.497Z,1513248862.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:22.515Z,1513248862.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:22.717Z,1513248862.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:22.862Z,1513248862.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:22.877Z,1513248862.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:23.272Z,1513248863.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:23.287Z,1513248863.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:23.514Z,1513248863.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:23.681Z,1513248863.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:23.713Z,1513248863.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:24.081Z,1513248864.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:24.117Z,1513248864.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:24.342Z,1513248864.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:24.474Z,1513248864.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:24.535Z,1513248864.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:24.773Z,1513248864.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:24.869Z,1513248864.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:24.931Z,1513248864.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:25.177Z,1513248865.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:25.273Z,1513248865.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:25.291Z,1513248865.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:25.678Z,1513248865.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:25.728Z,1513248865.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:25.973Z,1513248865.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:26.082Z,1513248866.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:26.098Z,1513248866.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:26.478Z,1513248866.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:26.501Z,1513248866.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:26.770Z,1513248866.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:26.863Z,1513248866.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:26.916Z,1513248866.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:27.173Z,1513248867.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:27.260Z,1513248867.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:27.287Z,1513248867.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:27.693Z,1513248867.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:27.755Z,1513248867.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:27.971Z,1513248867.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:28.080Z,1513248868.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:28.100Z,1513248868.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:28.481Z,1513248868.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:28.495Z,1513248868.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:28.765Z,1513248868.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:28.859Z,1513248868.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:28.890Z,1513248868.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:29.169Z,1513248869.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:29.280Z,1513248869.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:29.295Z,1513248869.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:29.659Z,1513248869.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:29.692Z,1513248869.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:29.965Z,1513248869.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:30.079Z,1513248870.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:30.098Z,1513248870.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:30.485Z,1513248870.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:30.500Z,1513248870.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:30.761Z,1513248870.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:30.895Z,1513248870.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:30.946Z,1513248870.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:31.165Z,1513248871.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:31.260Z,1513248871.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:31.298Z,1513248871.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:31.663Z,1513248871.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:31.695Z,1513248871.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:31.962Z,1513248871.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:32.061Z,1513248872.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:32.098Z,1513248872.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:32.452Z,1513248872.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:32.467Z,1513248872.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:32.757Z,1513248872.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:32.874Z,1513248872.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:32.939Z,1513248872.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:33.277Z,1513248873.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:33.303Z,1513248873.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:33.313Z,1513248873.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:33.670Z,1513248873.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:33.701Z,1513248873.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:34.064Z,1513248874.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:34.110Z,1513248874.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:34.119Z,1513248874.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:34.469Z,1513248874.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:34.485Z,1513248874.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:34.761Z,1513248874.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:34.868Z,1513248874.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:34.885Z,1513248874.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:35.267Z,1513248875.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:35.282Z,1513248875.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:35.557Z,1513248875.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:35.681Z,1513248875.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:35.711Z,1513248875.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:36.077Z,1513248876.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:36.127Z,1513248876.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:36.355Z,1513248876.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:36.481Z,1513248876.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:36.496Z,1513248876.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:36.781Z,1513248876.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:36.869Z,1513248876.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:36.892Z,1513248876.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:37.271Z,1513248877.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:37.328Z,1513248877.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:37.578Z,1513248877.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:37.675Z,1513248877.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:37.695Z,1513248877.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:38.077Z,1513248878.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:38.092Z,1513248878.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:38.375Z,1513248878.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:38.478Z,1513248878.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:38.492Z,1513248878.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:38.781Z,1513248878.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:38.874Z,1513248878.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:38.888Z,1513248878.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:39.260Z,1513248879.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:39.292Z,1513248879.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:39.577Z,1513248879.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:39.678Z,1513248879.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:39.699Z,1513248879.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:40.085Z,1513248880.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:40.100Z,1513248880.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:40.375Z,1513248880.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:40.519Z,1513248880.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:40.564Z,1513248880.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:40.866Z,1513248880.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:40.870Z,1513248880.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:40.884Z,1513248880.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:41.269Z,1513248881.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:41.283Z,1513248881.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:41.662Z,1513248881.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:41.682Z,1513248881.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:41.717Z,1513248881.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:42.070Z,1513248882.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:42.091Z,1513248882.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:42.457Z,1513248882.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:42.482Z,1513248882.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:42.513Z,1513248882.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:42.880Z,1513248882.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:42.936Z,1513248882.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:43.094Z,1513248883.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:43.271Z,1513248883.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:43.286Z,1513248883.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:43.673Z,1513248883.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:43.727Z,1513248883.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:43.731Z,1513248883.731 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T10:49:43.4Z
2017-12-14T10:54:43.731Z,1513248883.731 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T10:54:43.731Z,1513248883.731 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T10:54:43.889Z,1513248883.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:44.083Z,1513248884.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:44.103Z,1513248884.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:44.687Z,1513248884.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:44.946Z,1513248884.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:44.960Z,1513248884.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:45.064Z,1513248885.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:45.103Z,1513248885.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:45.126Z,1513248885.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:45.922Z,1513248885.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:46.718Z,1513248886.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:47.121Z,1513248887.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:47.920Z,1513248887.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:48.713Z,1513248888.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:48.751Z,1513248888.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:48.827Z,1513248888.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:48.913Z,1513248888.913 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0240.lzma
2017-12-14T10:54:48.944Z,1513248888.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:48.982Z,1513248888.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:49.117Z,1513248889.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:49.318Z,1513248889.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:49.386Z,1513248889.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:49.679Z,1513248889.679 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0240.lzma.bak
2017-12-14T10:54:49.680Z,1513248889.680 [DataOverHttps](INFO): SBD MOMSN=5438597
2017-12-14T10:54:49.717Z,1513248889.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:49.755Z,1513248889.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:49.914Z,1513248889.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:50.709Z,1513248890.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:51.006Z,1513248891.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:51.059Z,1513248891.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:51.113Z,1513248891.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:51.165Z,1513248891.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:51.189Z,1513248891.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:51.910Z,1513248891.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:52.705Z,1513248892.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:53.109Z,1513248893.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:53.905Z,1513248893.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:54.701Z,1513248894.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:54.741Z,1513248894.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:54.763Z,1513248894.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:54.864Z,1513248894.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:54.893Z,1513248894.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:55.105Z,1513248895.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:55.261Z,1513248895.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:55.292Z,1513248895.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:55.661Z,1513248895.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:55.675Z,1513248895.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:55.902Z,1513248895.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:56.056Z,1513248896.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:56.094Z,1513248896.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:56.461Z,1513248896.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:56.504Z,1513248896.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:54:56.699Z,1513248896.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:57.109Z,1513248897.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:57.905Z,1513248897.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:58.703Z,1513248898.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:59.109Z,1513248899.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:54:59.907Z,1513248899.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:00.111Z,1513248900.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:00.157Z,1513248900.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:00.233Z,1513248900.233 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0241.lzma
2017-12-14T10:55:00.266Z,1513248900.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:00.354Z,1513248900.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:00.616Z,1513248900.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:00.662Z,1513248900.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:00.701Z,1513248900.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:00.984Z,1513248900.984 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0241.lzma.bak
2017-12-14T10:55:00.984Z,1513248900.984 [DataOverHttps](INFO): SBD MOMSN=5438599
2017-12-14T10:55:01.026Z,1513248901.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:01.052Z,1513248901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:01.105Z,1513248901.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:01.901Z,1513248901.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:02.699Z,1513248902.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:03.101Z,1513248903.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:03.897Z,1513248903.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:04.693Z,1513248904.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:05.097Z,1513248905.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:05.894Z,1513248905.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:06.689Z,1513248906.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:07.093Z,1513248907.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:07.890Z,1513248907.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:08.685Z,1513248908.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:09.089Z,1513248909.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:09.886Z,1513248909.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:10.683Z,1513248910.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:11.105Z,1513248911.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:11.902Z,1513248911.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:12.702Z,1513248912.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:13.189Z,1513248913.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:13.985Z,1513248913.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:14.760Z,1513248914.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:15.554Z,1513248915.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:16.354Z,1513248916.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:16.769Z,1513248916.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:17.566Z,1513248917.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:18.366Z,1513248918.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:18.785Z,1513248918.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:19.582Z,1513248919.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:20.378Z,1513248920.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:20.781Z,1513248920.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:21.578Z,1513248921.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:22.378Z,1513248922.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:22.820Z,1513248922.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:22.830Z,1513248922.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:22.834Z,1513248922.834 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:55:22.834Z,1513248922.834 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:55:22.834Z,1513248922.834 [BPC1](ERROR): Communications Fault
2017-12-14T10:55:22.842Z,1513248922.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:22.845Z,1513248922.845 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T10:55:22.845Z,1513248922.845 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T10:55:22.845Z,1513248922.845 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T10:55:22.856Z,1513248922.856 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:55:22.954Z,1513248922.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:22.980Z,1513248922.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:23.626Z,1513248923.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:24.421Z,1513248924.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:25.114Z,1513248925.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:25.910Z,1513248925.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:26.526Z,1513248926.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:26.547Z,1513248926.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:26.652Z,1513248926.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:26.708Z,1513248926.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:26.727Z,1513248926.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:26.774Z,1513248926.774 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:55:26.774Z,1513248926.774 [BPC1] No Fault, FailCount= 1
2017-12-14T10:55:27.005Z,1513248927.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:27.089Z,1513248927.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:27.122Z,1513248927.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:27.418Z,1513248927.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:27.456Z,1513248927.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:27.811Z,1513248927.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:27.826Z,1513248927.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:27.918Z,1513248927.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:28.207Z,1513248928.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:28.224Z,1513248928.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:28.595Z,1513248928.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:28.624Z,1513248928.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:28.713Z,1513248928.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:28.996Z,1513248928.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:29.027Z,1513248929.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:29.117Z,1513248929.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:29.408Z,1513248929.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:29.423Z,1513248929.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:29.819Z,1513248929.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:29.834Z,1513248929.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:29.913Z,1513248929.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:30.220Z,1513248930.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:30.235Z,1513248930.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:30.615Z,1513248930.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:30.629Z,1513248930.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:30.709Z,1513248930.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:30.995Z,1513248930.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:31.029Z,1513248931.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:31.113Z,1513248931.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:31.431Z,1513248931.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:31.474Z,1513248931.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:31.795Z,1513248931.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:31.822Z,1513248931.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:31.910Z,1513248931.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:32.199Z,1513248932.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:32.226Z,1513248932.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:32.596Z,1513248932.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:32.622Z,1513248932.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:32.705Z,1513248932.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:33.026Z,1513248933.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:33.047Z,1513248933.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:33.109Z,1513248933.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:33.417Z,1513248933.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:33.433Z,1513248933.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:33.818Z,1513248933.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:33.833Z,1513248933.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:33.906Z,1513248933.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:34.195Z,1513248934.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:34.234Z,1513248934.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:34.629Z,1513248934.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:34.656Z,1513248934.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:34.701Z,1513248934.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:35.002Z,1513248935.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:35.036Z,1513248935.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:35.105Z,1513248935.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:35.399Z,1513248935.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:35.458Z,1513248935.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:35.809Z,1513248935.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:35.850Z,1513248935.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:35.901Z,1513248935.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:36.209Z,1513248936.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:36.236Z,1513248936.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:36.613Z,1513248936.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:36.643Z,1513248936.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:36.697Z,1513248936.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:37.003Z,1513248937.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:37.041Z,1513248937.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:37.101Z,1513248937.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:37.401Z,1513248937.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:37.440Z,1513248937.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:37.824Z,1513248937.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:37.856Z,1513248937.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:37.898Z,1513248937.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:38.204Z,1513248938.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:38.219Z,1513248938.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:38.606Z,1513248938.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:38.621Z,1513248938.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:38.695Z,1513248938.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:39.040Z,1513248939.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:39.061Z,1513248939.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:39.125Z,1513248939.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:39.420Z,1513248939.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:39.447Z,1513248939.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:39.811Z,1513248939.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:39.836Z,1513248939.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:39.922Z,1513248939.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:40.203Z,1513248940.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:40.235Z,1513248940.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:40.602Z,1513248940.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:40.625Z,1513248940.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:40.718Z,1513248940.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:41.047Z,1513248941.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:41.063Z,1513248941.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:41.121Z,1513248941.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:41.403Z,1513248941.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:41.423Z,1513248941.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:41.817Z,1513248941.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:41.832Z,1513248941.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:41.917Z,1513248941.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:42.218Z,1513248942.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:42.255Z,1513248942.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:42.627Z,1513248942.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:42.656Z,1513248942.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:42.714Z,1513248942.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:43.006Z,1513248943.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:43.020Z,1513248943.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:43.117Z,1513248943.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:43.406Z,1513248943.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:43.420Z,1513248943.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:43.809Z,1513248943.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:43.824Z,1513248943.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:43.914Z,1513248943.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:44.234Z,1513248944.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:44.266Z,1513248944.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:44.600Z,1513248944.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:44.616Z,1513248944.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:44.713Z,1513248944.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:45.017Z,1513248945.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:45.045Z,1513248945.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:45.118Z,1513248945.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:45.417Z,1513248945.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:45.457Z,1513248945.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:45.814Z,1513248945.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:45.847Z,1513248945.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:45.914Z,1513248945.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:46.203Z,1513248946.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:46.223Z,1513248946.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:46.605Z,1513248946.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:46.619Z,1513248946.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:46.709Z,1513248946.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:46.998Z,1513248946.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:47.062Z,1513248947.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:47.113Z,1513248947.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:47.403Z,1513248947.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:47.486Z,1513248947.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:47.814Z,1513248947.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:47.829Z,1513248947.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:47.909Z,1513248947.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:48.219Z,1513248948.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:48.279Z,1513248948.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:48.609Z,1513248948.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:48.658Z,1513248948.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:48.705Z,1513248948.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:48.996Z,1513248948.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:49.047Z,1513248949.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:49.109Z,1513248949.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:49.395Z,1513248949.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:49.432Z,1513248949.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:49.803Z,1513248949.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:49.838Z,1513248949.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:49.906Z,1513248949.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:50.200Z,1513248950.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:50.214Z,1513248950.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:50.601Z,1513248950.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:50.616Z,1513248950.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:50.702Z,1513248950.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:51.010Z,1513248951.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:51.024Z,1513248951.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:51.105Z,1513248951.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:51.410Z,1513248951.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:51.424Z,1513248951.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:51.808Z,1513248951.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:51.824Z,1513248951.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:51.902Z,1513248951.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:52.202Z,1513248952.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:52.221Z,1513248952.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:52.607Z,1513248952.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:52.622Z,1513248952.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:52.699Z,1513248952.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.002Z,1513248953.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.020Z,1513248953.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:53.117Z,1513248953.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.409Z,1513248953.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.424Z,1513248953.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:53.862Z,1513248953.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.914Z,1513248953.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:53.917Z,1513248953.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:54.216Z,1513248954.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:54.235Z,1513248954.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:54.618Z,1513248954.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:54.633Z,1513248954.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:54.710Z,1513248954.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:55.005Z,1513248955.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:55.033Z,1513248955.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:55.118Z,1513248955.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:55.396Z,1513248955.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:55.412Z,1513248955.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:55.799Z,1513248955.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:55.843Z,1513248955.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:55.914Z,1513248955.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:56.200Z,1513248956.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:56.214Z,1513248956.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:56.600Z,1513248956.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:56.623Z,1513248956.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:56.709Z,1513248956.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:57.036Z,1513248957.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:57.107Z,1513248957.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:57.114Z,1513248957.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:57.414Z,1513248957.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:57.435Z,1513248957.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:57.814Z,1513248957.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:57.828Z,1513248957.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:57.913Z,1513248957.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:58.198Z,1513248958.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:58.225Z,1513248958.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:58.595Z,1513248958.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:58.631Z,1513248958.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:58.709Z,1513248958.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:58.996Z,1513248958.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:59.035Z,1513248959.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:59.113Z,1513248959.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:59.409Z,1513248959.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:59.424Z,1513248959.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:59.819Z,1513248959.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:55:59.834Z,1513248959.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:55:59.909Z,1513248959.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:00.236Z,1513248960.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:00.283Z,1513248960.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:00.613Z,1513248960.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:00.636Z,1513248960.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:00.705Z,1513248960.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:01.004Z,1513248961.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:01.030Z,1513248961.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:01.109Z,1513248961.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:01.397Z,1513248961.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:01.412Z,1513248961.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:01.800Z,1513248961.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:01.816Z,1513248961.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:01.906Z,1513248961.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:02.204Z,1513248962.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:02.219Z,1513248962.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:02.602Z,1513248962.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:02.618Z,1513248962.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:02.701Z,1513248962.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:03.006Z,1513248963.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:03.021Z,1513248963.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:03.105Z,1513248963.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:03.409Z,1513248963.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:03.427Z,1513248963.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:03.810Z,1513248963.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:03.824Z,1513248963.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:03.902Z,1513248963.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:04.211Z,1513248964.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:04.226Z,1513248964.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:04.605Z,1513248964.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:04.620Z,1513248964.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:04.697Z,1513248964.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:05.016Z,1513248965.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:05.035Z,1513248965.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:05.101Z,1513248965.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:05.407Z,1513248965.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:05.427Z,1513248965.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:05.817Z,1513248965.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:05.831Z,1513248965.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:05.897Z,1513248965.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:06.218Z,1513248966.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:06.232Z,1513248966.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:06.703Z,1513248966.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:06.710Z,1513248966.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:06.775Z,1513248966.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:06.995Z,1513248966.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:07.031Z,1513248967.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:07.149Z,1513248967.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:07.395Z,1513248967.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:07.427Z,1513248967.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:07.795Z,1513248967.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:07.826Z,1513248967.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:07.946Z,1513248967.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:08.196Z,1513248968.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:08.230Z,1513248968.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:08.603Z,1513248968.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:08.630Z,1513248968.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:08.746Z,1513248968.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:09.006Z,1513248969.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:09.091Z,1513248969.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:09.149Z,1513248969.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:09.418Z,1513248969.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:09.449Z,1513248969.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:09.814Z,1513248969.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:09.906Z,1513248969.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:09.946Z,1513248969.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:10.208Z,1513248970.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:10.240Z,1513248970.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:10.611Z,1513248970.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:10.658Z,1513248970.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:10.741Z,1513248970.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:11.008Z,1513248971.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:11.056Z,1513248971.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:11.146Z,1513248971.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:11.395Z,1513248971.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:11.428Z,1513248971.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:11.825Z,1513248971.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:11.839Z,1513248971.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:11.941Z,1513248971.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:12.209Z,1513248972.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:12.240Z,1513248972.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:12.605Z,1513248972.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:12.633Z,1513248972.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:12.737Z,1513248972.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:13.007Z,1513248973.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:13.058Z,1513248973.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:13.141Z,1513248973.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:13.402Z,1513248973.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:13.420Z,1513248973.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:13.812Z,1513248973.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:13.831Z,1513248973.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:13.941Z,1513248973.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:14.206Z,1513248974.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:14.220Z,1513248974.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:14.602Z,1513248974.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:14.643Z,1513248974.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:14.737Z,1513248974.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:15.014Z,1513248975.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:15.029Z,1513248975.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:15.141Z,1513248975.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:15.415Z,1513248975.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:15.430Z,1513248975.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:15.806Z,1513248975.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:15.838Z,1513248975.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:15.938Z,1513248975.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:16.215Z,1513248976.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:16.259Z,1513248976.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:16.596Z,1513248976.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:16.623Z,1513248976.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:16.733Z,1513248976.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:17.004Z,1513248977.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:17.027Z,1513248977.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:17.139Z,1513248977.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:17.404Z,1513248977.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:17.420Z,1513248977.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:17.815Z,1513248977.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:17.831Z,1513248977.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:17.933Z,1513248977.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:18.270Z,1513248978.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:18.286Z,1513248978.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:18.613Z,1513248978.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:18.662Z,1513248978.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:18.729Z,1513248978.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:18.999Z,1513248978.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:19.056Z,1513248979.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:19.133Z,1513248979.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:19.395Z,1513248979.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:19.432Z,1513248979.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:19.796Z,1513248979.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:19.832Z,1513248979.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:19.930Z,1513248979.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:20.197Z,1513248980.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:20.227Z,1513248980.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:20.598Z,1513248980.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:20.641Z,1513248980.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:20.729Z,1513248980.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:21.018Z,1513248981.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:21.041Z,1513248981.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:21.138Z,1513248981.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:21.421Z,1513248981.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:21.449Z,1513248981.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:21.808Z,1513248981.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:21.867Z,1513248981.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:21.934Z,1513248981.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:22.201Z,1513248982.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:22.263Z,1513248982.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:22.600Z,1513248982.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:22.729Z,1513248982.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:22.754Z,1513248982.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:22.999Z,1513248982.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:23.074Z,1513248983.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:23.182Z,1513248983.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:23.418Z,1513248983.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:23.459Z,1513248983.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:23.980Z,1513248983.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:24.774Z,1513248984.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:25.177Z,1513248985.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:25.974Z,1513248985.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:26.770Z,1513248986.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:27.173Z,1513248987.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:27.970Z,1513248987.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:28.701Z,1513248988.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:28.718Z,1513248988.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:28.766Z,1513248988.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:28.838Z,1513248988.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:28.864Z,1513248988.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:29.169Z,1513248989.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:29.226Z,1513248989.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:29.257Z,1513248989.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:29.624Z,1513248989.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:29.669Z,1513248989.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:29.978Z,1513248989.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:30.016Z,1513248990.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:30.035Z,1513248990.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:30.424Z,1513248990.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:30.444Z,1513248990.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:30.757Z,1513248990.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:30.828Z,1513248990.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:30.903Z,1513248990.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:31.247Z,1513248991.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:31.292Z,1513248991.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:31.554Z,1513248991.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:31.641Z,1513248991.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:31.702Z,1513248991.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:32.006Z,1513248992.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:32.052Z,1513248992.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:32.349Z,1513248992.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:32.431Z,1513248992.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:32.523Z,1513248992.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:32.814Z,1513248992.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:32.861Z,1513248992.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:32.866Z,1513248992.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:33.207Z,1513248993.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:33.223Z,1513248993.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:33.621Z,1513248993.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:33.636Z,1513248993.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:33.662Z,1513248993.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:34.015Z,1513248994.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:34.068Z,1513248994.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:34.427Z,1513248994.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:34.442Z,1513248994.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:34.458Z,1513248994.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:34.810Z,1513248994.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:34.824Z,1513248994.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:35.126Z,1513248995.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:35.227Z,1513248995.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:35.260Z,1513248995.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:35.600Z,1513248995.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:35.627Z,1513248995.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:35.921Z,1513248995.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:36.016Z,1513248996.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:36.031Z,1513248996.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:36.396Z,1513248996.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:36.432Z,1513248996.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:36.718Z,1513248996.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:36.848Z,1513248996.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:36.898Z,1513248996.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:37.122Z,1513248997.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:37.215Z,1513248997.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:37.248Z,1513248997.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:37.616Z,1513248997.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:37.670Z,1513248997.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:37.918Z,1513248997.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:38.009Z,1513248998.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:38.036Z,1513248998.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:38.407Z,1513248998.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:38.435Z,1513248998.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:38.714Z,1513248998.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:38.826Z,1513248998.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:38.874Z,1513248998.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:39.117Z,1513248999.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:39.206Z,1513248999.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:39.232Z,1513248999.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:39.606Z,1513248999.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:39.630Z,1513248999.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:39.914Z,1513248999.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:40.015Z,1513249000.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:40.069Z,1513249000.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:40.422Z,1513249000.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:40.485Z,1513249000.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:40.710Z,1513249000.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:40.827Z,1513249000.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:40.884Z,1513249000.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:41.114Z,1513249001.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:41.198Z,1513249001.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:41.249Z,1513249001.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:41.596Z,1513249001.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:41.655Z,1513249001.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:41.910Z,1513249001.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:41.998Z,1513249001.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:42.080Z,1513249002.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:42.398Z,1513249002.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:42.458Z,1513249002.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:42.706Z,1513249002.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:42.831Z,1513249002.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:42.864Z,1513249002.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:43.110Z,1513249003.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:43.224Z,1513249003.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:43.319Z,1513249003.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:43.624Z,1513249003.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:43.682Z,1513249003.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:43.906Z,1513249003.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:44.014Z,1513249004.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:44.074Z,1513249004.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:44.396Z,1513249004.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:44.435Z,1513249004.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:44.702Z,1513249004.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:44.797Z,1513249004.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:44.832Z,1513249004.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:45.105Z,1513249005.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:45.201Z,1513249005.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:45.243Z,1513249005.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:45.601Z,1513249005.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:45.645Z,1513249005.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:45.902Z,1513249005.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:46.035Z,1513249006.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:46.066Z,1513249006.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:46.431Z,1513249006.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:46.469Z,1513249006.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:46.698Z,1513249006.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:46.835Z,1513249006.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:46.879Z,1513249006.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:47.102Z,1513249007.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:47.197Z,1513249007.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:47.236Z,1513249007.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:47.603Z,1513249007.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:47.652Z,1513249007.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:47.898Z,1513249007.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:47.997Z,1513249007.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:48.039Z,1513249008.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:48.403Z,1513249008.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:48.445Z,1513249008.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:48.698Z,1513249008.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:48.820Z,1513249008.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:48.851Z,1513249008.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:49.105Z,1513249009.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:49.225Z,1513249009.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:49.268Z,1513249009.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:49.615Z,1513249009.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:49.659Z,1513249009.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:49.902Z,1513249009.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:50.010Z,1513249010.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:50.062Z,1513249010.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:50.405Z,1513249010.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:50.453Z,1513249010.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:50.699Z,1513249010.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:50.813Z,1513249010.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:50.852Z,1513249010.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:51.118Z,1513249011.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:51.220Z,1513249011.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:51.255Z,1513249011.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:51.604Z,1513249011.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:51.631Z,1513249011.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:51.914Z,1513249011.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:52.012Z,1513249012.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:52.040Z,1513249012.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:52.446Z,1513249012.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:52.561Z,1513249012.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:52.714Z,1513249012.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:52.828Z,1513249012.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:52.927Z,1513249012.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:53.118Z,1513249013.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:53.205Z,1513249013.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:53.244Z,1513249013.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:53.598Z,1513249013.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:53.644Z,1513249013.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:53.916Z,1513249013.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:53.999Z,1513249013.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:54.047Z,1513249014.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:54.405Z,1513249014.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:54.448Z,1513249014.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:54.709Z,1513249014.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:54.822Z,1513249014.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:54.880Z,1513249014.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:55.115Z,1513249015.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:55.216Z,1513249015.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:55.231Z,1513249015.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:55.609Z,1513249015.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:55.643Z,1513249015.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:55.910Z,1513249015.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:55.000Z,1513249016.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:56.026Z,1513249016.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:56.406Z,1513249016.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:56.427Z,1513249016.427 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:56.427Z,1513249016.427 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208
2017-12-14T10:56:56.427Z,1513249016.427 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:56:56.433Z,1513249016.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:56.434Z,1513249016.434 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 208
2017-12-14T10:56:56.434Z,1513249016.434 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:56:56.436Z,1513249016.436 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:56.436Z,1513249016.436 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208
2017-12-14T10:56:56.436Z,1513249016.436 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:56:56.472Z,1513249016.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:56:56.477Z,1513249016.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:56:56.477Z,1513249016.477 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:56:56.705Z,1513249016.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:56.814Z,1513249016.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:56.840Z,1513249016.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:56:56.840Z,1513249016.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208
2017-12-14T10:56:56.849Z,1513249016.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:56:56.849Z,1513249016.849 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 208
2017-12-14T10:56:56.850Z,1513249016.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:56:56.850Z,1513249016.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208
2017-12-14T10:56:57.109Z,1513249017.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:57.205Z,1513249017.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:57.218Z,1513249017.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:56:57.219Z,1513249017.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:56:57.219Z,1513249017.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:56:57.219Z,1513249017.219 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:56:57.220Z,1513249017.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:56:57.220Z,1513249017.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:56:57.220Z,1513249017.220 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:56:57.221Z,1513249017.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:56:57.221Z,1513249017.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:56:57.606Z,1513249017.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:57.628Z,1513249017.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:57.906Z,1513249017.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:58.016Z,1513249018.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:58.030Z,1513249018.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:58.418Z,1513249018.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:58.434Z,1513249018.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:58.701Z,1513249018.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:58.810Z,1513249018.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:58.838Z,1513249018.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:59.105Z,1513249019.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:59.195Z,1513249019.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:59.234Z,1513249019.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:59.599Z,1513249019.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:56:59.627Z,1513249019.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:56:59.905Z,1513249019.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:00.000Z,1513249020.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:00.026Z,1513249020.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:00.453Z,1513249020.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:00.480Z,1513249020.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:00.703Z,1513249020.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:00.814Z,1513249020.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:00.842Z,1513249020.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:01.109Z,1513249021.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:01.222Z,1513249021.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:01.244Z,1513249021.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:01.609Z,1513249021.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:01.640Z,1513249021.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:01.906Z,1513249021.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:02.029Z,1513249022.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:02.087Z,1513249022.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:02.396Z,1513249022.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:02.431Z,1513249022.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:02.715Z,1513249022.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:02.819Z,1513249022.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:02.839Z,1513249022.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:03.122Z,1513249023.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:03.195Z,1513249023.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:03.240Z,1513249023.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:03.599Z,1513249023.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:03.631Z,1513249023.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:03.918Z,1513249023.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:04.018Z,1513249024.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:04.033Z,1513249024.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:04.423Z,1513249024.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:04.438Z,1513249024.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:04.714Z,1513249024.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:04.828Z,1513249024.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:04.847Z,1513249024.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:05.118Z,1513249025.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:05.233Z,1513249025.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:05.272Z,1513249025.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:05.595Z,1513249025.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:05.639Z,1513249025.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:05.916Z,1513249025.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:06.001Z,1513249026.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:06.032Z,1513249026.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:06.399Z,1513249026.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:06.439Z,1513249026.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:06.709Z,1513249026.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:06.818Z,1513249026.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:06.840Z,1513249026.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:07.214Z,1513249027.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:07.240Z,1513249027.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:07.506Z,1513249027.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:07.615Z,1513249027.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:07.647Z,1513249027.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:08.003Z,1513249028.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:08.017Z,1513249028.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:08.302Z,1513249028.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:08.445Z,1513249028.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:08.476Z,1513249028.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:08.810Z,1513249028.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:08.825Z,1513249028.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:09.097Z,1513249029.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:09.205Z,1513249029.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:09.240Z,1513249029.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:09.608Z,1513249029.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:09.624Z,1513249029.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:09.893Z,1513249029.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:10.010Z,1513249030.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:10.026Z,1513249030.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:10.410Z,1513249030.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:10.425Z,1513249030.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:10.690Z,1513249030.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:10.811Z,1513249030.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:10.826Z,1513249030.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:11.206Z,1513249031.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:11.221Z,1513249031.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:11.488Z,1513249031.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:11.633Z,1513249031.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:11.668Z,1513249031.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:12.019Z,1513249032.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:12.033Z,1513249032.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:12.282Z,1513249032.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:12.399Z,1513249032.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:12.437Z,1513249032.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:12.842Z,1513249032.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:12.868Z,1513249032.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:13.077Z,1513249033.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:13.227Z,1513249033.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:13.247Z,1513249033.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:13.619Z,1513249033.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:13.635Z,1513249033.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:13.875Z,1513249033.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:14.001Z,1513249034.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:14.030Z,1513249034.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:14.435Z,1513249034.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:14.463Z,1513249034.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:14.669Z,1513249034.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:14.838Z,1513249034.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:14.880Z,1513249034.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:15.196Z,1513249035.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:15.257Z,1513249035.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:15.466Z,1513249035.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:15.592Z,1513249035.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:15.608Z,1513249035.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:16.010Z,1513249036.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:16.043Z,1513249036.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:16.263Z,1513249036.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:16.426Z,1513249036.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:16.447Z,1513249036.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:16.806Z,1513249036.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:16.834Z,1513249036.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:16.914Z,1513249036.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:17.195Z,1513249037.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:17.228Z,1513249037.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:17.317Z,1513249037.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:17.595Z,1513249037.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:17.615Z,1513249037.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:17.721Z,1513249037.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:18.054Z,1513249038.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:18.092Z,1513249038.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:18.411Z,1513249038.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:18.427Z,1513249038.427 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:57:18.427Z,1513249038.427 [BPC1] Communications Fault, FailCount= 1
2017-12-14T10:57:18.427Z,1513249038.427 [BPC1](ERROR): Communications Fault
2017-12-14T10:57:18.436Z,1513249038.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:18.449Z,1513249038.449 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:57:18.518Z,1513249038.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:18.779Z,1513249038.779 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T10:57:18.779Z,1513249038.779 [NAL9602] Data Fault, FailCount= 2
2017-12-14T10:57:18.779Z,1513249038.779 [NAL9602](ERROR): Data Fault
2017-12-14T10:57:18.796Z,1513249038.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:18.851Z,1513249038.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:18.864Z,1513249038.864 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T10:57:19.179Z,1513249039.179 [NAL9602](INFO): Powering down
2017-12-14T10:57:19.196Z,1513249039.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:19.248Z,1513249039.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:19.313Z,1513249039.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:19.600Z,1513249039.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:19.615Z,1513249039.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:19.637Z,1513249039.637 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:57:19.637Z,1513249039.637 [BPC1] No Fault, FailCount= 1
2017-12-14T10:57:19.999Z,1513249039.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:20.061Z,1513249040.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:20.082Z,1513249040.082 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T10:57:20.082Z,1513249040.082 [NAL9602] No Fault, FailCount= 2
2017-12-14T10:57:20.110Z,1513249040.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:20.408Z,1513249040.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:20.422Z,1513249040.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:20.808Z,1513249040.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:20.822Z,1513249040.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:20.905Z,1513249040.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:21.227Z,1513249041.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:21.274Z,1513249041.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:21.603Z,1513249041.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:21.619Z,1513249041.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:21.702Z,1513249041.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.007Z,1513249042.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.068Z,1513249042.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:22.348Z,1513249042.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.396Z,1513249042.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.419Z,1513249042.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:22.757Z,1513249042.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.805Z,1513249042.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:22.827Z,1513249042.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:23.161Z,1513249043.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:23.204Z,1513249043.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:23.244Z,1513249043.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:23.565Z,1513249043.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:23.613Z,1513249043.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:23.635Z,1513249043.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:23.969Z,1513249043.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:24.374Z,1513249044.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:24.777Z,1513249044.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:25.573Z,1513249045.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:26.370Z,1513249046.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:26.773Z,1513249046.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:27.147Z,1513249047.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:27.162Z,1513249047.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:27.262Z,1513249047.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:27.303Z,1513249047.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:27.569Z,1513249047.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:27.677Z,1513249047.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:27.735Z,1513249047.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:28.045Z,1513249048.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:28.103Z,1513249048.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:28.367Z,1513249048.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:28.455Z,1513249048.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:28.491Z,1513249048.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:28.834Z,1513249048.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:28.846Z,1513249048.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:28.865Z,1513249048.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:29.249Z,1513249049.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:29.264Z,1513249049.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:29.632Z,1513249049.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:29.642Z,1513249049.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:29.673Z,1513249049.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:30.046Z,1513249050.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:30.062Z,1513249050.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:30.425Z,1513249050.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:30.446Z,1513249050.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:30.461Z,1513249050.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:30.876Z,1513249050.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:30.926Z,1513249050.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:31.101Z,1513249051.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:31.244Z,1513249051.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:31.258Z,1513249051.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:31.649Z,1513249051.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:31.664Z,1513249051.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:31.897Z,1513249051.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:32.043Z,1513249052.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:32.063Z,1513249052.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:32.432Z,1513249052.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:32.467Z,1513249052.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:32.696Z,1513249052.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:32.843Z,1513249052.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:32.872Z,1513249052.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:33.105Z,1513249053.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:33.247Z,1513249053.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:33.262Z,1513249053.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:33.632Z,1513249053.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:33.666Z,1513249053.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:33.902Z,1513249053.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:34.095Z,1513249054.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:34.119Z,1513249054.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:34.434Z,1513249054.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:34.464Z,1513249054.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:34.697Z,1513249054.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:34.855Z,1513249054.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:34.870Z,1513249054.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:35.101Z,1513249055.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:35.246Z,1513249055.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:35.266Z,1513249055.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:35.634Z,1513249055.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:35.667Z,1513249055.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:35.897Z,1513249055.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:36.049Z,1513249056.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:36.063Z,1513249056.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:36.436Z,1513249056.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:36.504Z,1513249056.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:36.693Z,1513249056.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:36.835Z,1513249056.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:36.867Z,1513249056.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:37.097Z,1513249057.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:37.268Z,1513249057.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:37.319Z,1513249057.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:37.662Z,1513249057.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:37.677Z,1513249057.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:37.894Z,1513249057.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:38.034Z,1513249058.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:38.071Z,1513249058.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:38.434Z,1513249058.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:38.495Z,1513249058.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:38.689Z,1513249058.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:38.835Z,1513249058.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:38.867Z,1513249058.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:39.093Z,1513249059.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:39.243Z,1513249059.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:39.352Z,1513249059.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:39.636Z,1513249059.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:39.668Z,1513249059.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:39.890Z,1513249059.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:40.036Z,1513249060.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:40.087Z,1513249060.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:40.468Z,1513249060.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:40.494Z,1513249060.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:40.685Z,1513249060.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:40.834Z,1513249060.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:40.883Z,1513249060.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:41.089Z,1513249061.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:41.239Z,1513249061.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:41.270Z,1513249061.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:41.638Z,1513249061.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:41.697Z,1513249061.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:41.885Z,1513249061.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:42.032Z,1513249062.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:42.046Z,1513249062.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:42.446Z,1513249062.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:42.482Z,1513249062.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:42.681Z,1513249062.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:42.851Z,1513249062.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:42.876Z,1513249062.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:43.085Z,1513249063.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:43.242Z,1513249063.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:43.275Z,1513249063.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:43.673Z,1513249063.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:43.700Z,1513249063.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:43.882Z,1513249063.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:44.040Z,1513249064.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:44.077Z,1513249064.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:44.432Z,1513249064.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:44.447Z,1513249064.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:44.679Z,1513249064.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:44.841Z,1513249064.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:44.855Z,1513249064.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:45.113Z,1513249065.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:45.242Z,1513249065.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:45.284Z,1513249065.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:45.631Z,1513249065.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:45.645Z,1513249065.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:45.937Z,1513249065.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:46.042Z,1513249066.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:46.079Z,1513249066.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:46.442Z,1513249066.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:46.456Z,1513249066.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:46.733Z,1513249066.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:46.872Z,1513249066.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:46.926Z,1513249066.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:47.137Z,1513249067.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:47.241Z,1513249067.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:47.257Z,1513249067.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:47.641Z,1513249067.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:47.655Z,1513249067.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:47.933Z,1513249067.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:48.042Z,1513249068.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:48.068Z,1513249068.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:48.445Z,1513249068.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:48.459Z,1513249068.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:48.732Z,1513249068.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:48.853Z,1513249068.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:48.868Z,1513249068.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:49.137Z,1513249069.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:49.218Z,1513249069.218 [NAL9602](INFO): Powering up NAL9602
2017-12-14T10:57:49.246Z,1513249069.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:49.296Z,1513249069.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:49.647Z,1513249069.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:49.666Z,1513249069.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:49.933Z,1513249069.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:50.062Z,1513249070.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:50.094Z,1513249070.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:50.447Z,1513249070.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:50.467Z,1513249070.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:50.729Z,1513249070.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:50.836Z,1513249070.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:50.868Z,1513249070.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:51.133Z,1513249071.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:51.239Z,1513249071.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:51.267Z,1513249071.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:51.632Z,1513249071.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:51.667Z,1513249071.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:52.039Z,1513249072.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:52.066Z,1513249072.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:52.434Z,1513249072.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:52.461Z,1513249072.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:52.866Z,1513249072.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:52.887Z,1513249072.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:53.271Z,1513249073.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:53.311Z,1513249073.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:53.634Z,1513249073.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:53.684Z,1513249073.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:54.032Z,1513249074.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:54.046Z,1513249074.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:54.445Z,1513249074.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:54.460Z,1513249074.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:54.845Z,1513249074.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:54.860Z,1513249074.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:55.244Z,1513249075.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:55.259Z,1513249075.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:55.638Z,1513249075.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:55.664Z,1513249075.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:56.043Z,1513249076.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:56.058Z,1513249076.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:56.499Z,1513249076.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:56.554Z,1513249076.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:56.844Z,1513249076.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:56.859Z,1513249076.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:57.249Z,1513249077.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:57.264Z,1513249077.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:57.654Z,1513249077.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:57.669Z,1513249077.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:58.048Z,1513249078.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:58.063Z,1513249078.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:58.459Z,1513249078.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:58.521Z,1513249078.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:58.835Z,1513249078.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:58.867Z,1513249078.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:59.235Z,1513249079.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:59.272Z,1513249079.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:57:59.648Z,1513249079.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:57:59.699Z,1513249079.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:00.055Z,1513249080.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:00.071Z,1513249080.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:00.418Z,1513249080.418 [NAL9602](INFO): NAL9602 initialized
2017-12-14T10:58:00.435Z,1513249080.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:00.502Z,1513249080.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:00.835Z,1513249080.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:00.861Z,1513249080.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:01.258Z,1513249081.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:01.326Z,1513249081.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:01.661Z,1513249081.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:01.676Z,1513249081.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:02.057Z,1513249082.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:02.084Z,1513249082.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:02.435Z,1513249082.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:02.488Z,1513249082.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:02.874Z,1513249082.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:02.914Z,1513249082.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:03.241Z,1513249083.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:03.295Z,1513249083.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:03.653Z,1513249083.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:03.679Z,1513249083.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:04.053Z,1513249084.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:04.075Z,1513249084.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:04.449Z,1513249084.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:04.483Z,1513249084.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:04.875Z,1513249084.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:04.895Z,1513249084.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:05.247Z,1513249085.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:05.281Z,1513249085.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:05.640Z,1513249085.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:05.659Z,1513249085.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:06.057Z,1513249086.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:06.088Z,1513249086.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:06.435Z,1513249086.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:06.461Z,1513249086.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:06.856Z,1513249086.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:06.871Z,1513249086.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:07.262Z,1513249087.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:07.277Z,1513249087.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:07.653Z,1513249087.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:07.669Z,1513249087.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:08.035Z,1513249088.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:08.071Z,1513249088.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:08.435Z,1513249088.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:08.467Z,1513249088.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:08.836Z,1513249088.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:08.867Z,1513249088.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:09.279Z,1513249089.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:09.326Z,1513249089.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:09.645Z,1513249089.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:09.679Z,1513249089.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:10.058Z,1513249090.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:10.074Z,1513249090.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:10.469Z,1513249090.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:10.518Z,1513249090.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:10.837Z,1513249090.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:10.867Z,1513249090.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:11.239Z,1513249091.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:11.274Z,1513249091.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:11.639Z,1513249091.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:11.699Z,1513249091.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:12.037Z,1513249092.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:12.083Z,1513249092.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:12.476Z,1513249092.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:12.500Z,1513249092.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:12.853Z,1513249092.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:12.876Z,1513249092.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:13.260Z,1513249093.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:13.287Z,1513249093.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:13.654Z,1513249093.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:13.669Z,1513249093.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:14.052Z,1513249094.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:14.067Z,1513249094.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:14.441Z,1513249094.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:14.459Z,1513249094.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:14.844Z,1513249094.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:14.859Z,1513249094.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:15.246Z,1513249095.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:15.264Z,1513249095.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:15.655Z,1513249095.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:15.684Z,1513249095.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:16.054Z,1513249096.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:16.086Z,1513249096.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:16.459Z,1513249096.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:16.476Z,1513249096.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:16.839Z,1513249096.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:16.870Z,1513249096.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:17.236Z,1513249097.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:17.263Z,1513249097.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:17.639Z,1513249097.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:17.678Z,1513249097.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:18.041Z,1513249098.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:18.068Z,1513249098.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:18.435Z,1513249098.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:18.468Z,1513249098.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:18.863Z,1513249098.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:18.903Z,1513249098.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:19.257Z,1513249099.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:19.288Z,1513249099.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:19.657Z,1513249099.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:19.683Z,1513249099.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:20.043Z,1513249100.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:20.058Z,1513249100.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:20.444Z,1513249100.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:20.463Z,1513249100.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:20.845Z,1513249100.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:20.867Z,1513249100.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:21.245Z,1513249101.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:21.260Z,1513249101.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:21.658Z,1513249101.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:21.693Z,1513249101.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:22.073Z,1513249102.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:22.100Z,1513249102.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:22.466Z,1513249102.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:22.511Z,1513249102.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:22.838Z,1513249102.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:22.874Z,1513249102.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:23.243Z,1513249103.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:23.259Z,1513249103.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:23.643Z,1513249103.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:23.663Z,1513249103.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:23.894Z,1513249103.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:24.689Z,1513249104.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:25.093Z,1513249105.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:27.149Z,1513249107.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:27.218Z,1513249107.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:27.321Z,1513249107.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:27.352Z,1513249107.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:27.486Z,1513249107.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:27.711Z,1513249107.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:27.732Z,1513249107.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:27.889Z,1513249107.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:28.107Z,1513249108.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:28.164Z,1513249108.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:28.492Z,1513249108.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:28.523Z,1513249108.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:28.689Z,1513249108.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:28.876Z,1513249108.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:28.916Z,1513249108.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:29.097Z,1513249109.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:29.280Z,1513249109.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:29.324Z,1513249109.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:29.689Z,1513249109.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:29.724Z,1513249109.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:29.894Z,1513249109.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:30.079Z,1513249110.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:30.095Z,1513249110.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:30.486Z,1513249110.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:30.502Z,1513249110.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:30.689Z,1513249110.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:30.906Z,1513249110.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:30.933Z,1513249110.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:31.093Z,1513249111.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:31.290Z,1513249111.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:31.328Z,1513249111.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:31.690Z,1513249111.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:31.749Z,1513249111.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:31.890Z,1513249111.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:32.091Z,1513249112.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:32.127Z,1513249112.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:32.497Z,1513249112.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:32.524Z,1513249112.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:32.685Z,1513249112.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:32.901Z,1513249112.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:32.935Z,1513249112.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:33.089Z,1513249113.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:33.291Z,1513249113.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:33.322Z,1513249113.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:33.683Z,1513249113.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:33.699Z,1513249113.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:33.886Z,1513249113.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:34.078Z,1513249114.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:34.107Z,1513249114.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:34.486Z,1513249114.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:34.500Z,1513249114.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:34.682Z,1513249114.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:34.890Z,1513249114.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:34.904Z,1513249114.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:35.086Z,1513249115.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:35.290Z,1513249115.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:35.304Z,1513249115.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:35.684Z,1513249115.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:35.699Z,1513249115.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:35.882Z,1513249115.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:36.083Z,1513249116.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:36.098Z,1513249116.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:36.493Z,1513249116.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:36.509Z,1513249116.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:36.677Z,1513249116.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:36.905Z,1513249116.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:36.956Z,1513249116.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:37.081Z,1513249117.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:37.290Z,1513249117.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:37.304Z,1513249117.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:37.687Z,1513249117.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:37.707Z,1513249117.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:37.878Z,1513249117.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:38.086Z,1513249118.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:38.100Z,1513249118.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:38.490Z,1513249118.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:38.505Z,1513249118.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:38.674Z,1513249118.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:38.902Z,1513249118.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:38.933Z,1513249118.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:39.081Z,1513249119.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:39.294Z,1513249119.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:39.308Z,1513249119.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:39.686Z,1513249119.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:39.701Z,1513249119.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:39.878Z,1513249119.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:40.084Z,1513249120.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:40.104Z,1513249120.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:40.496Z,1513249120.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:40.515Z,1513249120.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:40.675Z,1513249120.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:40.893Z,1513249120.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:40.910Z,1513249120.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:41.106Z,1513249121.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:41.311Z,1513249121.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:41.358Z,1513249121.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:41.684Z,1513249121.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:41.700Z,1513249121.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:41.902Z,1513249121.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:42.078Z,1513249122.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:42.109Z,1513249122.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:42.494Z,1513249122.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:42.509Z,1513249122.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:42.699Z,1513249122.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:42.895Z,1513249122.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:42.927Z,1513249122.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:43.109Z,1513249123.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:43.305Z,1513249123.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:43.327Z,1513249123.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:43.680Z,1513249123.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:43.707Z,1513249123.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:43.906Z,1513249123.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:44.075Z,1513249124.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:44.107Z,1513249124.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:44.498Z,1513249124.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:44.514Z,1513249124.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:44.701Z,1513249124.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:44.895Z,1513249124.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:44.916Z,1513249124.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:45.105Z,1513249125.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:45.293Z,1513249125.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:45.314Z,1513249125.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:45.676Z,1513249125.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:45.711Z,1513249125.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:45.902Z,1513249125.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:46.075Z,1513249126.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:46.109Z,1513249126.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:46.494Z,1513249126.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:46.509Z,1513249126.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:46.697Z,1513249126.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:46.895Z,1513249126.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:46.924Z,1513249126.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:47.101Z,1513249127.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:47.298Z,1513249127.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:47.312Z,1513249127.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:47.715Z,1513249127.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:47.799Z,1513249127.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:47.898Z,1513249127.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:48.084Z,1513249128.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:48.099Z,1513249128.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:48.488Z,1513249128.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:48.504Z,1513249128.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:48.693Z,1513249128.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:48.889Z,1513249128.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:48.946Z,1513249128.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:49.097Z,1513249129.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:49.294Z,1513249129.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:49.315Z,1513249129.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:49.689Z,1513249129.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:49.704Z,1513249129.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:49.894Z,1513249129.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:50.084Z,1513249130.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:50.142Z,1513249130.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:50.504Z,1513249130.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:50.538Z,1513249130.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:50.689Z,1513249130.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:50.892Z,1513249130.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:50.983Z,1513249130.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:51.094Z,1513249131.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:51.291Z,1513249131.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:51.307Z,1513249131.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:51.690Z,1513249131.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:51.704Z,1513249131.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:51.889Z,1513249131.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:52.075Z,1513249132.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:52.107Z,1513249132.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:52.494Z,1513249132.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:52.509Z,1513249132.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:52.686Z,1513249132.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:52.902Z,1513249132.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:52.917Z,1513249132.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:53.089Z,1513249133.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:53.293Z,1513249133.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:53.316Z,1513249133.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:53.687Z,1513249133.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:53.703Z,1513249133.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:53.886Z,1513249133.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:54.075Z,1513249134.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:54.137Z,1513249134.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:54.485Z,1513249134.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:54.512Z,1513249134.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:54.683Z,1513249134.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:54.913Z,1513249134.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:54.935Z,1513249134.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:55.093Z,1513249135.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:55.304Z,1513249135.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:55.323Z,1513249135.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:55.680Z,1513249135.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:55.713Z,1513249135.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:55.891Z,1513249135.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:56.075Z,1513249136.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:56.101Z,1513249136.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:56.489Z,1513249136.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:56.519Z,1513249136.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:56.687Z,1513249136.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:56.911Z,1513249136.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:56.931Z,1513249136.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:57.093Z,1513249137.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:57.320Z,1513249137.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:57.359Z,1513249137.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:57.687Z,1513249137.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:57.726Z,1513249137.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:57.889Z,1513249137.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:58.078Z,1513249138.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:58.092Z,1513249138.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:58.483Z,1513249138.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:58.498Z,1513249138.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:58.685Z,1513249138.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:58.884Z,1513249138.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:58.899Z,1513249138.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:59.089Z,1513249139.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:59.284Z,1513249139.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:59.331Z,1513249139.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:59.694Z,1513249139.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:58:59.730Z,1513249139.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:58:59.886Z,1513249139.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:00.097Z,1513249140.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:00.130Z,1513249140.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:00.508Z,1513249140.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:00.547Z,1513249140.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:00.682Z,1513249140.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:00.890Z,1513249140.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:00.907Z,1513249140.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:01.085Z,1513249141.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:01.286Z,1513249141.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:01.301Z,1513249141.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:01.682Z,1513249141.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:01.702Z,1513249141.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:01.881Z,1513249141.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:02.086Z,1513249142.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:02.102Z,1513249142.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:02.498Z,1513249142.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:02.519Z,1513249142.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:02.677Z,1513249142.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:02.898Z,1513249142.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:02.943Z,1513249142.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:03.081Z,1513249143.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:03.293Z,1513249143.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:03.308Z,1513249143.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:03.723Z,1513249143.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:03.759Z,1513249143.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:03.878Z,1513249143.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:04.083Z,1513249144.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:04.103Z,1513249144.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:04.493Z,1513249144.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:04.508Z,1513249144.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:04.676Z,1513249144.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:04.893Z,1513249144.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:04.916Z,1513249144.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:05.081Z,1513249145.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:05.299Z,1513249145.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:05.319Z,1513249145.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:05.690Z,1513249145.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:05.705Z,1513249145.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:05.880Z,1513249145.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:06.094Z,1513249146.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:06.109Z,1513249146.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:06.494Z,1513249146.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:06.510Z,1513249146.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:06.673Z,1513249146.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:06.906Z,1513249146.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:06.949Z,1513249146.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:07.078Z,1513249147.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:07.300Z,1513249147.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:07.315Z,1513249147.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:07.684Z,1513249147.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:07.710Z,1513249147.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:07.874Z,1513249147.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:08.076Z,1513249148.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:08.116Z,1513249148.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:08.506Z,1513249148.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:08.521Z,1513249148.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:08.671Z,1513249148.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:08.898Z,1513249148.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:08.920Z,1513249148.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:09.117Z,1513249149.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:09.295Z,1513249149.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:09.310Z,1513249149.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:09.680Z,1513249149.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:09.701Z,1513249149.701 [BPC1](ERROR): Failed to parse message.
2017-12-14T10:59:09.702Z,1513249149.702 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T10:59:09.702Z,1513249149.702 [BPC1] Data Fault, FailCount= 1
2017-12-14T10:59:09.702Z,1513249149.702 [BPC1](ERROR): Data Fault
2017-12-14T10:59:09.710Z,1513249149.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:09.723Z,1513249149.723 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T10:59:09.914Z,1513249149.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:10.110Z,1513249150.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:10.134Z,1513249150.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:10.486Z,1513249150.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:10.514Z,1513249150.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:10.711Z,1513249150.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:10.910Z,1513249150.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:10.925Z,1513249150.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:10.939Z,1513249150.939 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:59:10.939Z,1513249150.939 [BPC1] No Fault, FailCount= 1
2017-12-14T10:59:11.286Z,1513249151.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:11.411Z,1513249151.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:11.506Z,1513249151.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:11.684Z,1513249151.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:11.699Z,1513249151.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:11.909Z,1513249151.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:12.081Z,1513249152.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:12.096Z,1513249152.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:12.494Z,1513249152.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:12.525Z,1513249152.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:12.708Z,1513249152.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:12.894Z,1513249152.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:12.921Z,1513249152.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:13.113Z,1513249153.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:13.319Z,1513249153.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:13.339Z,1513249153.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:13.684Z,1513249153.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:13.703Z,1513249153.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:13.742Z,1513249153.742 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T10:59:13.910Z,1513249153.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:14.086Z,1513249154.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:14.101Z,1513249154.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:14.497Z,1513249154.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:14.512Z,1513249154.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:14.706Z,1513249154.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:14.891Z,1513249154.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:14.905Z,1513249154.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:15.109Z,1513249155.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:15.285Z,1513249155.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:15.304Z,1513249155.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:15.684Z,1513249155.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:15.699Z,1513249155.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:15.906Z,1513249155.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:16.085Z,1513249156.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:16.100Z,1513249156.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:16.507Z,1513249156.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:16.531Z,1513249156.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:16.701Z,1513249156.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:16.905Z,1513249156.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:16.936Z,1513249156.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:17.106Z,1513249157.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:17.287Z,1513249157.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:17.310Z,1513249157.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:17.689Z,1513249157.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:17.705Z,1513249157.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:17.901Z,1513249157.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:18.085Z,1513249158.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:18.100Z,1513249158.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:18.494Z,1513249158.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:18.508Z,1513249158.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:18.697Z,1513249158.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:18.891Z,1513249158.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:18.918Z,1513249158.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:19.101Z,1513249159.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:19.305Z,1513249159.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:19.320Z,1513249159.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:19.704Z,1513249159.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:19.774Z,1513249159.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:19.898Z,1513249159.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:20.075Z,1513249160.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:20.111Z,1513249160.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:20.498Z,1513249160.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:20.515Z,1513249160.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:20.693Z,1513249160.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:20.908Z,1513249160.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:20.928Z,1513249160.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:21.097Z,1513249161.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:21.297Z,1513249161.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:21.313Z,1513249161.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:21.680Z,1513249161.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:21.707Z,1513249161.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:21.894Z,1513249161.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:22.058Z,1513249162.058 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T10:59:22.058Z,1513249162.058 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T10:59:22.058Z,1513249162.058 [DropWeight](ERROR): Hardware Fault
2017-12-14T10:59:22.075Z,1513249162.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:22.108Z,1513249162.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:22.137Z,1513249162.137 [CBIT](INFO): Critical error at 20171214T105922
2017-12-14T10:59:22.139Z,1513249162.139 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T10:59:22.139Z,1513249162.139 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T10:59:22.485Z,1513249162.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:22.517Z,1513249162.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:22.541Z,1513249162.541 [CBIT](INFO): Critical error at 20171214T105922
2017-12-14T10:59:22.691Z,1513249162.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:22.889Z,1513249162.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:22.959Z,1513249162.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:23.109Z,1513249163.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:23.286Z,1513249163.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:23.307Z,1513249163.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:23.683Z,1513249163.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:23.713Z,1513249163.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:23.905Z,1513249163.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:24.703Z,1513249164.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:25.121Z,1513249165.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:25.918Z,1513249165.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:26.713Z,1513249166.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:27.117Z,1513249167.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:27.218Z,1513249167.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:27.234Z,1513249167.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:27.342Z,1513249167.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:27.376Z,1513249167.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:27.726Z,1513249167.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:27.740Z,1513249167.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:27.914Z,1513249167.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:28.194Z,1513249168.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:28.238Z,1513249168.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:28.514Z,1513249168.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:28.548Z,1513249168.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:28.709Z,1513249168.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:28.915Z,1513249168.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:28.938Z,1513249168.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:29.113Z,1513249169.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:29.322Z,1513249169.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:29.348Z,1513249169.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:29.727Z,1513249169.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:29.755Z,1513249169.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:29.912Z,1513249169.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:30.135Z,1513249170.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:30.155Z,1513249170.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:30.530Z,1513249170.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:30.590Z,1513249170.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:30.705Z,1513249170.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:30.914Z,1513249170.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:30.936Z,1513249170.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:31.112Z,1513249171.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:31.319Z,1513249171.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:31.334Z,1513249171.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:31.725Z,1513249171.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:31.739Z,1513249171.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:31.905Z,1513249171.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:32.118Z,1513249172.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:32.136Z,1513249172.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:32.530Z,1513249172.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:32.588Z,1513249172.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:32.725Z,1513249172.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:32.933Z,1513249172.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:32.956Z,1513249172.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:33.129Z,1513249173.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:33.330Z,1513249173.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:33.345Z,1513249173.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:33.720Z,1513249173.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:33.734Z,1513249173.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:33.926Z,1513249173.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:34.118Z,1513249174.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:34.143Z,1513249174.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:34.519Z,1513249174.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:34.540Z,1513249174.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:34.722Z,1513249174.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:34.931Z,1513249174.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:34.939Z,1513249174.939 [BPC1](ERROR): Failed to receive battery data
2017-12-14T10:59:34.939Z,1513249174.939 [BPC1] Communications Fault, FailCount= 2
2017-12-14T10:59:34.939Z,1513249174.939 [BPC1](ERROR): Communications Fault
2017-12-14T10:59:34.952Z,1513249174.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:34.993Z,1513249174.993 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T10:59:35.125Z,1513249175.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:35.311Z,1513249175.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:35.343Z,1513249175.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:35.756Z,1513249175.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:35.791Z,1513249175.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:35.922Z,1513249175.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:36.134Z,1513249176.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:36.148Z,1513249176.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:36.161Z,1513249176.161 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T10:59:36.162Z,1513249176.162 [BPC1] No Fault, FailCount= 2
2017-12-14T10:59:36.522Z,1513249176.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:36.591Z,1513249176.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:36.718Z,1513249176.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:36.930Z,1513249176.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:36.953Z,1513249176.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:37.121Z,1513249177.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:37.321Z,1513249177.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:37.351Z,1513249177.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:37.718Z,1513249177.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:37.732Z,1513249177.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:37.918Z,1513249177.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:38.114Z,1513249178.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:38.128Z,1513249178.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:38.529Z,1513249178.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:38.563Z,1513249178.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:38.714Z,1513249178.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:38.933Z,1513249178.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:38.968Z,1513249178.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:39.117Z,1513249179.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:39.338Z,1513249179.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:39.367Z,1513249179.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:39.719Z,1513249179.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:39.734Z,1513249179.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:39.914Z,1513249179.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:40.116Z,1513249180.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:40.148Z,1513249180.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:40.516Z,1513249180.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:40.532Z,1513249180.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:40.709Z,1513249180.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:40.925Z,1513249180.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:40.940Z,1513249180.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:41.113Z,1513249181.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:41.314Z,1513249181.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:41.348Z,1513249181.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:41.728Z,1513249181.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:41.744Z,1513249181.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:41.911Z,1513249181.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:42.165Z,1513249182.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:42.192Z,1513249182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:42.531Z,1513249182.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:42.547Z,1513249182.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:42.709Z,1513249182.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:42.927Z,1513249182.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:42.944Z,1513249182.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:43.113Z,1513249183.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:43.311Z,1513249183.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:43.337Z,1513249183.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:43.727Z,1513249183.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:43.742Z,1513249183.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:43.909Z,1513249183.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:44.108Z,1513249184.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:44.135Z,1513249184.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:44.529Z,1513249184.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:44.543Z,1513249184.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:44.705Z,1513249184.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:44.928Z,1513249184.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:44.986Z,1513249184.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:45.109Z,1513249185.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:45.335Z,1513249185.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:45.350Z,1513249185.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:45.711Z,1513249185.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:45.742Z,1513249185.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:45.905Z,1513249185.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:46.115Z,1513249186.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:46.141Z,1513249186.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:46.511Z,1513249186.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:46.542Z,1513249186.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:46.701Z,1513249186.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:46.912Z,1513249186.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:46.942Z,1513249186.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:47.105Z,1513249187.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:47.319Z,1513249187.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:47.351Z,1513249187.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:47.735Z,1513249187.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:47.803Z,1513249187.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:47.903Z,1513249187.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:48.135Z,1513249188.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:48.150Z,1513249188.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:48.547Z,1513249188.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:48.567Z,1513249188.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:48.698Z,1513249188.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:48.928Z,1513249188.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:48.953Z,1513249188.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:49.101Z,1513249189.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:49.320Z,1513249189.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:49.352Z,1513249189.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:49.716Z,1513249189.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:49.753Z,1513249189.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:49.897Z,1513249189.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:50.124Z,1513249190.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:50.153Z,1513249190.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:50.531Z,1513249190.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:50.563Z,1513249190.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:50.695Z,1513249190.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:50.954Z,1513249190.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:50.975Z,1513249190.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:51.101Z,1513249191.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:51.329Z,1513249191.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:51.359Z,1513249191.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:51.749Z,1513249191.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:51.776Z,1513249191.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:51.898Z,1513249191.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:52.122Z,1513249192.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:52.137Z,1513249192.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:52.521Z,1513249192.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:52.543Z,1513249192.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:52.695Z,1513249192.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:52.920Z,1513249192.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:52.939Z,1513249192.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:53.109Z,1513249193.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:53.314Z,1513249193.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:53.341Z,1513249193.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:53.726Z,1513249193.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:53.741Z,1513249193.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:53.906Z,1513249193.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:54.129Z,1513249194.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:54.144Z,1513249194.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:54.526Z,1513249194.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:54.547Z,1513249194.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:54.704Z,1513249194.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:54.967Z,1513249194.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:54.995Z,1513249194.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:55.110Z,1513249195.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:55.319Z,1513249195.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:55.386Z,1513249195.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:55.725Z,1513249195.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:55.740Z,1513249195.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:55.909Z,1513249195.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:56.122Z,1513249196.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:56.137Z,1513249196.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:56.530Z,1513249196.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:56.547Z,1513249196.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:56.709Z,1513249196.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:56.930Z,1513249196.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:56.983Z,1513249196.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:57.113Z,1513249197.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:57.330Z,1513249197.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:57.345Z,1513249197.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:57.345Z,1513249197.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209
2017-12-14T10:59:57.345Z,1513249197.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T10:59:57.347Z,1513249197.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:57.347Z,1513249197.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 209
2017-12-14T10:59:57.347Z,1513249197.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T10:59:57.349Z,1513249197.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:57.349Z,1513249197.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209
2017-12-14T10:59:57.349Z,1513249197.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T10:59:57.385Z,1513249197.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T10:59:57.385Z,1513249197.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T10:59:57.386Z,1513249197.386 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T10:59:57.710Z,1513249197.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:57.792Z,1513249197.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T10:59:57.792Z,1513249197.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209
2017-12-14T10:59:57.793Z,1513249197.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T10:59:57.793Z,1513249197.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 209
2017-12-14T10:59:57.793Z,1513249197.793 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T10:59:57.793Z,1513249197.793 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209
2017-12-14T10:59:57.909Z,1513249197.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:58.110Z,1513249198.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:58.164Z,1513249198.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T10:59:58.164Z,1513249198.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:59:58.164Z,1513249198.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:59:58.173Z,1513249198.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T10:59:58.174Z,1513249198.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:59:58.174Z,1513249198.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:59:58.174Z,1513249198.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T10:59:58.175Z,1513249198.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T10:59:58.175Z,1513249198.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T10:59:58.511Z,1513249198.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:58.538Z,1513249198.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:58.706Z,1513249198.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:58.934Z,1513249198.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:58.948Z,1513249198.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:59.109Z,1513249199.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:59.310Z,1513249199.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:59.339Z,1513249199.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:59.734Z,1513249199.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T10:59:59.755Z,1513249199.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T10:59:59.906Z,1513249199.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:00.132Z,1513249200.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:00.147Z,1513249200.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:00.529Z,1513249200.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:00.545Z,1513249200.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:00.701Z,1513249200.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:00.936Z,1513249200.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:00.951Z,1513249200.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:01.105Z,1513249201.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:01.310Z,1513249201.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:01.343Z,1513249201.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:01.711Z,1513249201.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:01.746Z,1513249201.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:01.902Z,1513249201.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:02.111Z,1513249202.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:02.142Z,1513249202.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:02.540Z,1513249202.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:02.559Z,1513249202.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:02.697Z,1513249202.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:02.942Z,1513249202.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:02.963Z,1513249202.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:03.101Z,1513249203.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:03.331Z,1513249203.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:03.347Z,1513249203.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:03.710Z,1513249203.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:03.743Z,1513249203.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:03.897Z,1513249203.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:04.106Z,1513249204.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:04.133Z,1513249204.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:04.510Z,1513249204.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:04.567Z,1513249204.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:04.695Z,1513249204.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:04.916Z,1513249204.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:04.940Z,1513249204.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:05.316Z,1513249205.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:05.354Z,1513249205.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:05.410Z,1513249205.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:05.730Z,1513249205.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:05.759Z,1513249205.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:06.130Z,1513249206.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:06.195Z,1513249206.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:06.206Z,1513249206.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:06.529Z,1513249206.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:06.552Z,1513249206.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:06.916Z,1513249206.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:06.943Z,1513249206.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:07.002Z,1513249207.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:07.323Z,1513249207.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:07.337Z,1513249207.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:07.405Z,1513249207.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:07.727Z,1513249207.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:07.742Z,1513249207.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:08.120Z,1513249208.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:08.141Z,1513249208.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:08.202Z,1513249208.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:08.527Z,1513249208.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:08.544Z,1513249208.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:08.753Z,1513249208.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:08.945Z,1513249208.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:08.975Z,1513249208.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:09.329Z,1513249209.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:09.344Z,1513249209.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:09.550Z,1513249209.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:09.724Z,1513249209.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:09.741Z,1513249209.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:10.104Z,1513249210.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:10.139Z,1513249210.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:10.348Z,1513249210.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:10.518Z,1513249210.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:10.534Z,1513249210.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:10.757Z,1513249210.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:10.915Z,1513249210.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:10.942Z,1513249210.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:11.322Z,1513249211.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:11.358Z,1513249211.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:11.554Z,1513249211.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:11.730Z,1513249211.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:11.744Z,1513249211.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:12.133Z,1513249212.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:12.147Z,1513249212.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:12.351Z,1513249212.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:12.535Z,1513249212.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:12.550Z,1513249212.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:12.773Z,1513249212.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:12.922Z,1513249212.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:12.937Z,1513249212.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:13.319Z,1513249213.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:13.333Z,1513249213.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:13.570Z,1513249213.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:13.711Z,1513249213.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:13.749Z,1513249213.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:14.124Z,1513249214.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:14.140Z,1513249214.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:14.366Z,1513249214.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:14.524Z,1513249214.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:14.591Z,1513249214.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:14.769Z,1513249214.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:14.935Z,1513249214.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:14.955Z,1513249214.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:15.330Z,1513249215.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:15.346Z,1513249215.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:15.566Z,1513249215.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:15.710Z,1513249215.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:15.736Z,1513249215.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:16.112Z,1513249216.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:16.138Z,1513249216.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:16.363Z,1513249216.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:16.525Z,1513249216.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:16.540Z,1513249216.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:16.805Z,1513249216.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:16.912Z,1513249216.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:16.971Z,1513249216.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:17.315Z,1513249217.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:17.340Z,1513249217.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:17.602Z,1513249217.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:17.762Z,1513249217.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:17.787Z,1513249217.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:18.134Z,1513249218.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:18.168Z,1513249218.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:18.397Z,1513249218.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:18.530Z,1513249218.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:18.561Z,1513249218.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:18.938Z,1513249218.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:18.953Z,1513249218.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:19.082Z,1513249219.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:19.318Z,1513249219.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:19.367Z,1513249219.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:19.719Z,1513249219.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:19.877Z,1513249219.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:19.886Z,1513249219.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:20.118Z,1513249220.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:20.170Z,1513249220.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:20.525Z,1513249220.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:20.548Z,1513249220.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:20.676Z,1513249220.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:20.954Z,1513249220.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:20.980Z,1513249220.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:21.098Z,1513249221.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:21.334Z,1513249221.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:21.364Z,1513249221.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:21.721Z,1513249221.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:21.735Z,1513249221.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:21.894Z,1513249221.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:22.116Z,1513249222.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:22.145Z,1513249222.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:22.520Z,1513249222.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:22.539Z,1513249222.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:22.689Z,1513249222.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:22.914Z,1513249222.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:22.937Z,1513249222.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:23.093Z,1513249223.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:23.324Z,1513249223.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:23.338Z,1513249223.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:23.341Z,1513249223.341 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:00:23.342Z,1513249223.342 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:00:23.342Z,1513249223.342 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:00:23.342Z,1513249223.342 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:00:23.737Z,1513249223.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:23.752Z,1513249223.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:23.776Z,1513249223.776 [Default:CheckIn:D] Stopped
2017-12-14T11:00:23.776Z,1513249223.776 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:00:23.890Z,1513249223.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:24.685Z,1513249224.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:25.089Z,1513249225.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:25.886Z,1513249225.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:26.681Z,1513249226.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:27.085Z,1513249227.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:27.238Z,1513249227.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:27.254Z,1513249227.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:27.273Z,1513249227.273 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 627.139779 min 
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn:E] Stopped
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn] Stopped
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn](INFO): Running loop #61
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn] Running Loop=61
2017-12-14T11:00:27.274Z,1513249227.274 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:00:27.275Z,1513249227.275 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:00:27.393Z,1513249227.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:27.435Z,1513249227.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:27.747Z,1513249227.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:27.762Z,1513249227.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:27.881Z,1513249227.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:28.142Z,1513249228.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:28.156Z,1513249228.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:28.540Z,1513249228.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:28.599Z,1513249228.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:28.677Z,1513249228.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:28.950Z,1513249228.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:28.966Z,1513249228.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:29.081Z,1513249229.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:29.340Z,1513249229.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:29.355Z,1513249229.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:29.746Z,1513249229.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:29.763Z,1513249229.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:29.878Z,1513249229.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:30.145Z,1513249230.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:30.161Z,1513249230.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:30.545Z,1513249230.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:30.604Z,1513249230.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:30.676Z,1513249230.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:30.964Z,1513249230.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:31.062Z,1513249231.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:31.081Z,1513249231.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:31.342Z,1513249231.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:31.357Z,1513249231.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:31.743Z,1513249231.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:31.758Z,1513249231.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:31.877Z,1513249231.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:32.142Z,1513249232.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:32.158Z,1513249232.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:32.543Z,1513249232.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:32.564Z,1513249232.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:32.676Z,1513249232.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:32.946Z,1513249232.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:32.967Z,1513249232.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:33.109Z,1513249233.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:33.346Z,1513249233.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:33.360Z,1513249233.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:33.758Z,1513249233.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:33.786Z,1513249233.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:33.906Z,1513249233.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:34.131Z,1513249234.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:34.163Z,1513249234.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:34.542Z,1513249234.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:34.564Z,1513249234.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:34.703Z,1513249234.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:34.931Z,1513249234.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:34.956Z,1513249234.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:35.109Z,1513249235.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:35.329Z,1513249235.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:35.356Z,1513249235.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:35.762Z,1513249235.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:35.777Z,1513249235.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:35.906Z,1513249235.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:36.154Z,1513249236.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:36.169Z,1513249236.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:36.552Z,1513249236.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:36.614Z,1513249236.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:36.701Z,1513249236.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:36.957Z,1513249236.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:36.997Z,1513249236.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:37.106Z,1513249237.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:37.331Z,1513249237.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:37.357Z,1513249237.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:37.734Z,1513249237.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:37.748Z,1513249237.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:37.901Z,1513249237.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:38.182Z,1513249238.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:38.277Z,1513249238.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:38.546Z,1513249238.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:38.561Z,1513249238.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:38.697Z,1513249238.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:38.947Z,1513249238.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:38.987Z,1513249238.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:39.101Z,1513249239.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:39.342Z,1513249239.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:39.360Z,1513249239.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:39.731Z,1513249239.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:39.767Z,1513249239.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:39.901Z,1513249239.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:40.162Z,1513249240.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:40.190Z,1513249240.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:40.538Z,1513249240.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:40.587Z,1513249240.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:40.697Z,1513249240.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:40.942Z,1513249240.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:40.962Z,1513249240.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:41.101Z,1513249241.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:41.339Z,1513249241.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:41.383Z,1513249241.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:41.746Z,1513249241.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:41.762Z,1513249241.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:41.898Z,1513249241.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:42.145Z,1513249242.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:42.198Z,1513249242.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:42.541Z,1513249242.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:42.563Z,1513249242.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:42.693Z,1513249242.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:42.942Z,1513249242.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:42.983Z,1513249242.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:43.097Z,1513249243.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:43.336Z,1513249243.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:43.363Z,1513249243.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:43.739Z,1513249243.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:43.759Z,1513249243.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:43.894Z,1513249243.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:44.132Z,1513249244.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:44.152Z,1513249244.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:44.544Z,1513249244.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:44.563Z,1513249244.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:44.690Z,1513249244.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:44.945Z,1513249244.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:44.967Z,1513249244.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:45.093Z,1513249245.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:45.341Z,1513249245.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:45.368Z,1513249245.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:45.743Z,1513249245.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:45.763Z,1513249245.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:45.890Z,1513249245.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:46.143Z,1513249246.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:46.159Z,1513249246.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:46.536Z,1513249246.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:46.555Z,1513249246.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:46.687Z,1513249246.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:46.941Z,1513249246.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:46.964Z,1513249246.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:47.102Z,1513249247.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:47.341Z,1513249247.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:47.355Z,1513249247.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:47.746Z,1513249247.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:47.776Z,1513249247.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:47.898Z,1513249247.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:48.154Z,1513249248.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:48.169Z,1513249248.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:48.549Z,1513249248.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:48.564Z,1513249248.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:48.694Z,1513249248.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:48.930Z,1513249248.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:48.955Z,1513249248.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:49.109Z,1513249249.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:49.330Z,1513249249.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:49.356Z,1513249249.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:49.749Z,1513249249.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:49.763Z,1513249249.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:49.905Z,1513249249.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:50.169Z,1513249250.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:50.223Z,1513249250.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:50.541Z,1513249250.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:50.568Z,1513249250.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:50.701Z,1513249250.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:50.945Z,1513249250.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:50.976Z,1513249250.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:51.105Z,1513249251.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:51.342Z,1513249251.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:51.375Z,1513249251.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:51.735Z,1513249251.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:51.767Z,1513249251.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:51.901Z,1513249251.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:52.132Z,1513249252.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:52.170Z,1513249252.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:52.531Z,1513249252.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:52.568Z,1513249252.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:52.699Z,1513249252.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:52.931Z,1513249252.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:52.946Z,1513249252.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:53.101Z,1513249253.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:53.337Z,1513249253.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:53.351Z,1513249253.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:53.742Z,1513249253.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:53.765Z,1513249253.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:53.899Z,1513249253.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:54.149Z,1513249254.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:54.176Z,1513249254.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:54.539Z,1513249254.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:54.553Z,1513249254.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:54.693Z,1513249254.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:54.942Z,1513249254.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:54.958Z,1513249254.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:55.097Z,1513249255.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:55.335Z,1513249255.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:55.350Z,1513249255.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:55.738Z,1513249255.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:55.752Z,1513249255.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:55.893Z,1513249255.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:56.133Z,1513249256.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:56.156Z,1513249256.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:56.592Z,1513249256.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:56.615Z,1513249256.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:56.690Z,1513249256.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:56.962Z,1513249256.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:56.992Z,1513249256.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:57.093Z,1513249257.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:57.349Z,1513249257.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:57.364Z,1513249257.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:57.744Z,1513249257.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:57.759Z,1513249257.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:57.890Z,1513249257.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:58.135Z,1513249258.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:58.167Z,1513249258.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:58.531Z,1513249258.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:58.559Z,1513249258.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:58.685Z,1513249258.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:58.951Z,1513249258.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:58.967Z,1513249258.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:59.089Z,1513249259.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:59.337Z,1513249259.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:59.364Z,1513249259.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:59.790Z,1513249259.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:00:59.851Z,1513249259.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:00:59.894Z,1513249259.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:00.157Z,1513249260.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:00.173Z,1513249260.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:00.550Z,1513249260.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:00.565Z,1513249260.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:00.691Z,1513249260.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:00.931Z,1513249260.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:00.956Z,1513249260.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:01.157Z,1513249261.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:01.330Z,1513249261.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:01.387Z,1513249261.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:01.735Z,1513249261.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:01.761Z,1513249261.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:01.954Z,1513249261.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:02.135Z,1513249262.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:02.187Z,1513249262.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:02.542Z,1513249262.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:02.569Z,1513249262.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:02.752Z,1513249262.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:02.946Z,1513249262.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:03.048Z,1513249263.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:03.157Z,1513249263.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:03.342Z,1513249263.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:03.369Z,1513249263.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:03.730Z,1513249263.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:03.775Z,1513249263.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:03.953Z,1513249263.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:04.131Z,1513249264.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:04.173Z,1513249264.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:04.532Z,1513249264.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:04.546Z,1513249264.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:04.749Z,1513249264.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:04.941Z,1513249264.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:04.971Z,1513249264.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:05.335Z,1513249265.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:05.351Z,1513249265.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:05.546Z,1513249265.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:05.742Z,1513249265.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:05.773Z,1513249265.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:06.173Z,1513249266.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:06.202Z,1513249266.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:06.343Z,1513249266.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:06.552Z,1513249266.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:06.571Z,1513249266.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:06.769Z,1513249266.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:06.925Z,1513249266.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:06.956Z,1513249266.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:07.331Z,1513249267.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:07.367Z,1513249267.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:07.566Z,1513249267.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:07.735Z,1513249267.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:07.763Z,1513249267.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:08.124Z,1513249268.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:08.160Z,1513249268.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:08.364Z,1513249268.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:08.547Z,1513249268.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:08.567Z,1513249268.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:08.769Z,1513249268.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:08.954Z,1513249268.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:08.969Z,1513249268.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:09.354Z,1513249269.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:09.370Z,1513249269.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:09.566Z,1513249269.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:09.753Z,1513249269.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:09.768Z,1513249269.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:10.131Z,1513249270.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:10.165Z,1513249270.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:10.363Z,1513249270.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:10.548Z,1513249270.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:10.564Z,1513249270.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:10.770Z,1513249270.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:10.931Z,1513249270.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:10.962Z,1513249270.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:11.334Z,1513249271.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:11.361Z,1513249271.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:11.565Z,1513249271.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:11.746Z,1513249271.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:11.767Z,1513249271.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:12.158Z,1513249272.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:12.207Z,1513249272.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:12.363Z,1513249272.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:12.552Z,1513249272.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:12.567Z,1513249272.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:12.800Z,1513249272.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:12.931Z,1513249272.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:12.967Z,1513249272.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:13.335Z,1513249273.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:13.350Z,1513249273.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:13.594Z,1513249273.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:13.740Z,1513249273.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:13.754Z,1513249273.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:14.132Z,1513249274.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:14.148Z,1513249274.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:14.389Z,1513249274.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:14.550Z,1513249274.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:14.573Z,1513249274.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:14.950Z,1513249274.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:14.979Z,1513249274.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:15.109Z,1513249275.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:15.343Z,1513249275.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:15.384Z,1513249275.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:15.806Z,1513249275.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:15.857Z,1513249275.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:15.906Z,1513249275.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:16.141Z,1513249276.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:16.156Z,1513249276.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:16.559Z,1513249276.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:16.595Z,1513249276.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:16.704Z,1513249276.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:16.933Z,1513249276.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:16.991Z,1513249276.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:17.114Z,1513249277.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:17.333Z,1513249277.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:17.388Z,1513249277.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:17.744Z,1513249277.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:17.823Z,1513249277.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:17.910Z,1513249277.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:18.147Z,1513249278.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:18.171Z,1513249278.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:18.543Z,1513249278.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:18.623Z,1513249278.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:18.707Z,1513249278.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:18.934Z,1513249278.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:18.974Z,1513249278.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:19.114Z,1513249279.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:19.356Z,1513249279.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:19.388Z,1513249279.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:19.741Z,1513249279.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:19.830Z,1513249279.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:19.914Z,1513249279.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:20.171Z,1513249280.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:20.199Z,1513249280.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:20.563Z,1513249280.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:20.620Z,1513249280.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:20.710Z,1513249280.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:20.948Z,1513249280.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:21.026Z,1513249281.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:21.113Z,1513249281.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:21.356Z,1513249281.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:21.391Z,1513249281.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:21.741Z,1513249281.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:21.794Z,1513249281.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:21.910Z,1513249281.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:22.140Z,1513249282.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:22.200Z,1513249282.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:22.540Z,1513249282.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:22.615Z,1513249282.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:22.705Z,1513249282.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:22.942Z,1513249282.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:23.007Z,1513249283.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:23.109Z,1513249283.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:23.354Z,1513249283.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:23.413Z,1513249283.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:23.760Z,1513249283.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:23.783Z,1513249283.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:23.906Z,1513249283.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:24.701Z,1513249284.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:25.105Z,1513249285.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:25.902Z,1513249285.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:26.698Z,1513249286.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:27.101Z,1513249287.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:27.898Z,1513249287.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:28.702Z,1513249288.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:29.117Z,1513249289.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:29.553Z,1513249289.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:29.562Z,1513249289.562 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:01:29.562Z,1513249289.562 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:01:29.562Z,1513249289.562 [BPC1](ERROR): Communications Fault
2017-12-14T11:01:29.570Z,1513249289.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:29.583Z,1513249289.583 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:01:29.718Z,1513249289.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:29.752Z,1513249289.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:29.914Z,1513249289.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:30.042Z,1513249290.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:30.074Z,1513249290.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:30.445Z,1513249290.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:30.470Z,1513249290.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:30.493Z,1513249290.493 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:01:30.493Z,1513249290.493 [BPC1] No Fault, FailCount= 1
2017-12-14T11:01:30.710Z,1513249290.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:30.826Z,1513249290.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:30.927Z,1513249290.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:31.114Z,1513249291.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:31.230Z,1513249291.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:31.268Z,1513249291.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:31.638Z,1513249291.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:31.668Z,1513249291.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:31.910Z,1513249291.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:32.036Z,1513249292.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:32.072Z,1513249292.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:32.436Z,1513249292.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:32.476Z,1513249292.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:32.706Z,1513249292.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:32.829Z,1513249292.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:32.871Z,1513249292.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:33.109Z,1513249293.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:33.234Z,1513249293.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:33.274Z,1513249293.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:33.642Z,1513249293.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:33.691Z,1513249293.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:33.906Z,1513249293.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:34.039Z,1513249294.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:34.075Z,1513249294.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:34.427Z,1513249294.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:34.479Z,1513249294.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:34.702Z,1513249294.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:34.841Z,1513249294.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:34.892Z,1513249294.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:35.105Z,1513249295.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:35.252Z,1513249295.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:35.276Z,1513249295.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:35.641Z,1513249295.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:35.668Z,1513249295.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:35.902Z,1513249295.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:36.020Z,1513249296.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:36.091Z,1513249296.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:36.446Z,1513249296.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:36.500Z,1513249296.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:36.698Z,1513249296.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:36.821Z,1513249296.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:36.860Z,1513249296.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:37.102Z,1513249297.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:37.278Z,1513249297.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:37.318Z,1513249297.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:37.644Z,1513249297.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:37.663Z,1513249297.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:37.899Z,1513249297.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:38.040Z,1513249298.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:38.155Z,1513249298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:38.457Z,1513249298.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:38.516Z,1513249298.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:38.694Z,1513249298.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:38.835Z,1513249298.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:38.859Z,1513249298.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:39.097Z,1513249299.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:39.231Z,1513249299.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:39.292Z,1513249299.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:39.643Z,1513249299.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:39.689Z,1513249299.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:39.894Z,1513249299.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:40.037Z,1513249300.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:40.056Z,1513249300.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:40.440Z,1513249300.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:40.522Z,1513249300.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:40.690Z,1513249300.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:40.851Z,1513249300.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:40.875Z,1513249300.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:41.093Z,1513249301.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:41.245Z,1513249301.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:41.268Z,1513249301.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:41.632Z,1513249301.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:41.670Z,1513249301.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:41.892Z,1513249301.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:42.025Z,1513249302.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:42.068Z,1513249302.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:42.432Z,1513249302.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:42.463Z,1513249302.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:42.687Z,1513249302.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:42.830Z,1513249302.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:42.874Z,1513249302.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:43.114Z,1513249303.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:43.229Z,1513249303.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:43.272Z,1513249303.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:43.635Z,1513249303.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:43.671Z,1513249303.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:43.910Z,1513249303.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:44.040Z,1513249304.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:44.071Z,1513249304.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:44.447Z,1513249304.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:44.518Z,1513249304.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:44.706Z,1513249304.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:44.841Z,1513249304.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:44.880Z,1513249304.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:45.118Z,1513249305.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:45.227Z,1513249305.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:45.250Z,1513249305.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:45.628Z,1513249305.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:45.685Z,1513249305.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:45.915Z,1513249305.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:46.032Z,1513249306.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:46.076Z,1513249306.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:46.430Z,1513249306.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:46.502Z,1513249306.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:46.710Z,1513249306.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:46.841Z,1513249306.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:46.864Z,1513249306.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:47.113Z,1513249307.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:47.245Z,1513249307.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:47.272Z,1513249307.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:47.640Z,1513249307.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:47.670Z,1513249307.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:47.910Z,1513249307.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:48.020Z,1513249308.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:48.036Z,1513249308.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:48.444Z,1513249308.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:48.499Z,1513249308.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:48.706Z,1513249308.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:48.830Z,1513249308.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:48.849Z,1513249308.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:49.109Z,1513249309.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:49.227Z,1513249309.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:49.247Z,1513249309.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:49.643Z,1513249309.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:49.725Z,1513249309.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:49.908Z,1513249309.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:50.033Z,1513249310.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:50.048Z,1513249310.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:50.430Z,1513249310.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:50.445Z,1513249310.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:50.702Z,1513249310.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:50.822Z,1513249310.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:50.846Z,1513249310.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:51.105Z,1513249311.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:51.228Z,1513249311.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:51.294Z,1513249311.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:51.631Z,1513249311.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:51.646Z,1513249311.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:51.901Z,1513249311.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:52.026Z,1513249312.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:52.052Z,1513249312.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:52.428Z,1513249312.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:52.552Z,1513249312.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:52.697Z,1513249312.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:52.856Z,1513249312.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:52.892Z,1513249312.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:53.101Z,1513249313.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:53.241Z,1513249313.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:53.292Z,1513249313.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:53.637Z,1513249313.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:53.652Z,1513249313.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:53.898Z,1513249313.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:54.018Z,1513249314.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:54.043Z,1513249314.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:54.456Z,1513249314.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:54.490Z,1513249314.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:54.693Z,1513249314.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:54.829Z,1513249314.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:54.852Z,1513249314.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:55.097Z,1513249315.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:55.219Z,1513249315.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:55.247Z,1513249315.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:55.637Z,1513249315.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:55.653Z,1513249315.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:55.894Z,1513249315.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:56.065Z,1513249316.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:56.104Z,1513249316.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:56.437Z,1513249316.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:56.459Z,1513249316.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:56.691Z,1513249316.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:56.819Z,1513249316.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:56.850Z,1513249316.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:57.102Z,1513249317.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:57.220Z,1513249317.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:57.242Z,1513249317.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:57.619Z,1513249317.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:57.634Z,1513249317.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:57.897Z,1513249317.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:58.017Z,1513249318.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:58.031Z,1513249318.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:58.427Z,1513249318.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:58.464Z,1513249318.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:58.695Z,1513249318.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:58.830Z,1513249318.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:58.860Z,1513249318.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:59.101Z,1513249319.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:59.296Z,1513249319.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:59.339Z,1513249319.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:59.638Z,1513249319.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:01:59.662Z,1513249319.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:01:59.899Z,1513249319.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:00.024Z,1513249320.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:00.039Z,1513249320.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:00.423Z,1513249320.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:00.438Z,1513249320.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:00.693Z,1513249320.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:00.828Z,1513249320.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:00.863Z,1513249320.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:01.100Z,1513249321.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:01.223Z,1513249321.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:01.238Z,1513249321.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:01.641Z,1513249321.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:01.689Z,1513249321.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:01.894Z,1513249321.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:02.038Z,1513249322.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:02.068Z,1513249322.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:02.471Z,1513249322.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:02.491Z,1513249322.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:02.689Z,1513249322.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:02.824Z,1513249322.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:02.844Z,1513249322.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:03.093Z,1513249323.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:03.228Z,1513249323.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:03.251Z,1513249323.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:03.629Z,1513249323.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:03.644Z,1513249323.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:03.890Z,1513249323.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:04.030Z,1513249324.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:04.045Z,1513249324.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:04.430Z,1513249324.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:04.479Z,1513249324.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:04.685Z,1513249324.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:04.830Z,1513249324.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:04.846Z,1513249324.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:05.089Z,1513249325.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:05.241Z,1513249325.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:05.278Z,1513249325.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:05.674Z,1513249325.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:05.697Z,1513249325.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:05.886Z,1513249325.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:06.028Z,1513249326.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:06.043Z,1513249326.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:06.433Z,1513249326.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:06.448Z,1513249326.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:06.681Z,1513249326.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:06.823Z,1513249326.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:06.879Z,1513249326.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:07.085Z,1513249327.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:07.231Z,1513249327.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:07.248Z,1513249327.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:07.637Z,1513249327.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:07.653Z,1513249327.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:07.881Z,1513249327.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:08.036Z,1513249328.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:08.060Z,1513249328.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:08.459Z,1513249328.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:08.484Z,1513249328.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:08.677Z,1513249328.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:08.872Z,1513249328.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:08.909Z,1513249328.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:09.081Z,1513249329.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:09.219Z,1513249329.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:09.253Z,1513249329.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:09.631Z,1513249329.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:09.646Z,1513249329.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:09.878Z,1513249329.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:10.020Z,1513249330.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:10.040Z,1513249330.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:10.419Z,1513249330.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:10.454Z,1513249330.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:10.676Z,1513249330.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:10.844Z,1513249330.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:10.859Z,1513249330.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:11.141Z,1513249331.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:11.245Z,1513249331.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:11.259Z,1513249331.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:11.630Z,1513249331.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:11.667Z,1513249331.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:11.938Z,1513249331.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:12.055Z,1513249332.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:12.075Z,1513249332.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:12.428Z,1513249332.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:12.443Z,1513249332.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:12.734Z,1513249332.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:12.828Z,1513249332.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:12.843Z,1513249332.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:13.137Z,1513249333.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:13.226Z,1513249333.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:13.249Z,1513249333.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:13.635Z,1513249333.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:13.684Z,1513249333.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:13.934Z,1513249333.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:14.037Z,1513249334.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:14.052Z,1513249334.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:14.436Z,1513249334.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:14.456Z,1513249334.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:14.729Z,1513249334.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:14.823Z,1513249334.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:14.879Z,1513249334.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:15.134Z,1513249335.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:15.267Z,1513249335.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:15.292Z,1513249335.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:15.633Z,1513249335.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:15.690Z,1513249335.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:15.929Z,1513249335.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:16.031Z,1513249336.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:16.046Z,1513249336.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:16.427Z,1513249336.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:16.444Z,1513249336.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:16.725Z,1513249336.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:16.842Z,1513249336.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:16.858Z,1513249336.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:17.129Z,1513249337.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:17.245Z,1513249337.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:17.259Z,1513249337.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:17.639Z,1513249337.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:17.654Z,1513249337.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:17.926Z,1513249337.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:18.029Z,1513249338.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:18.044Z,1513249338.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:18.440Z,1513249338.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:18.486Z,1513249338.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:18.721Z,1513249338.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:18.822Z,1513249338.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:18.852Z,1513249338.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:19.125Z,1513249339.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:19.219Z,1513249339.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:19.252Z,1513249339.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:19.642Z,1513249339.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:19.657Z,1513249339.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:19.921Z,1513249339.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:20.035Z,1513249340.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:20.065Z,1513249340.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:20.439Z,1513249340.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:20.459Z,1513249340.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:20.717Z,1513249340.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:20.837Z,1513249340.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:20.853Z,1513249340.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:21.121Z,1513249341.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:21.218Z,1513249341.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:21.253Z,1513249341.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:21.656Z,1513249341.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:21.703Z,1513249341.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:21.917Z,1513249341.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:22.051Z,1513249342.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:22.067Z,1513249342.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:22.453Z,1513249342.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:22.468Z,1513249342.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:22.713Z,1513249342.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:22.842Z,1513249342.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:22.857Z,1513249342.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:23.240Z,1513249343.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:23.259Z,1513249343.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:23.509Z,1513249343.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:23.617Z,1513249343.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:23.648Z,1513249343.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:24.020Z,1513249344.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:24.070Z,1513249344.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:24.305Z,1513249344.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:25.101Z,1513249345.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:25.897Z,1513249345.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:26.696Z,1513249346.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:27.105Z,1513249347.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:27.509Z,1513249347.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:27.654Z,1513249347.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:27.669Z,1513249347.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:27.778Z,1513249347.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:27.811Z,1513249347.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:27.914Z,1513249347.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:28.200Z,1513249348.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:28.220Z,1513249348.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:28.562Z,1513249348.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:28.577Z,1513249348.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:28.709Z,1513249348.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:28.955Z,1513249348.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:28.971Z,1513249348.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:29.113Z,1513249349.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:29.392Z,1513249349.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:29.407Z,1513249349.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:29.756Z,1513249349.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:29.771Z,1513249349.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:29.910Z,1513249349.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:30.153Z,1513249350.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:30.172Z,1513249350.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:30.557Z,1513249350.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:30.580Z,1513249350.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:30.706Z,1513249350.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:30.969Z,1513249350.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:30.984Z,1513249350.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:31.110Z,1513249351.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:31.378Z,1513249351.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:31.408Z,1513249351.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:31.754Z,1513249351.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:31.770Z,1513249351.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:31.905Z,1513249351.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:32.155Z,1513249352.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:32.170Z,1513249352.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:32.555Z,1513249352.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:32.575Z,1513249352.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:32.701Z,1513249352.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:32.954Z,1513249352.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:32.977Z,1513249352.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:33.105Z,1513249353.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:33.357Z,1513249353.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:33.372Z,1513249353.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:33.766Z,1513249353.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:33.781Z,1513249353.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:33.902Z,1513249353.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:34.164Z,1513249354.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:34.183Z,1513249354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:34.566Z,1513249354.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:34.582Z,1513249354.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:34.701Z,1513249354.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:34.947Z,1513249354.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:34.978Z,1513249354.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:35.105Z,1513249355.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:35.343Z,1513249355.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:35.375Z,1513249355.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:35.749Z,1513249355.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:35.764Z,1513249355.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:35.902Z,1513249355.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:36.150Z,1513249356.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:36.467Z,1513249356.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:36.594Z,1513249356.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:36.636Z,1513249356.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:36.697Z,1513249356.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:36.981Z,1513249356.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:37.025Z,1513249357.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:37.101Z,1513249357.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:37.362Z,1513249357.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:37.384Z,1513249357.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:37.747Z,1513249357.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:37.799Z,1513249357.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:37.898Z,1513249357.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:38.148Z,1513249358.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:38.179Z,1513249358.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:38.552Z,1513249358.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:38.579Z,1513249358.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:38.695Z,1513249358.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:38.947Z,1513249358.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:38.963Z,1513249358.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:39.105Z,1513249359.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:39.351Z,1513249359.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:39.366Z,1513249359.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:39.766Z,1513249359.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:39.791Z,1513249359.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:39.902Z,1513249359.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:40.169Z,1513249360.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:40.191Z,1513249360.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:40.561Z,1513249360.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:40.632Z,1513249360.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:40.699Z,1513249360.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:40.961Z,1513249360.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:41.022Z,1513249361.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:41.117Z,1513249361.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:41.357Z,1513249361.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:41.372Z,1513249361.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:41.751Z,1513249361.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:41.767Z,1513249361.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:41.914Z,1513249361.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:42.148Z,1513249362.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:42.171Z,1513249362.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:42.565Z,1513249362.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:42.579Z,1513249362.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:42.710Z,1513249362.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:42.965Z,1513249362.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:42.980Z,1513249362.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:43.113Z,1513249363.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:43.366Z,1513249363.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:43.380Z,1513249363.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:43.760Z,1513249363.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:43.774Z,1513249363.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:43.910Z,1513249363.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:44.155Z,1513249364.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:44.170Z,1513249364.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:44.563Z,1513249364.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:44.584Z,1513249364.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:44.733Z,1513249364.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:44.951Z,1513249364.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:44.978Z,1513249364.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:45.137Z,1513249365.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:45.360Z,1513249365.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:45.374Z,1513249365.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:45.770Z,1513249365.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:45.784Z,1513249365.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:45.934Z,1513249365.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:46.169Z,1513249366.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:46.208Z,1513249366.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:46.565Z,1513249366.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:46.580Z,1513249366.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:46.729Z,1513249366.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:46.968Z,1513249366.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:47.014Z,1513249367.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:47.134Z,1513249367.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:47.375Z,1513249367.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:47.391Z,1513249367.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:47.765Z,1513249367.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:47.779Z,1513249367.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:47.929Z,1513249367.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:48.160Z,1513249368.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:48.183Z,1513249368.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:48.572Z,1513249368.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:48.595Z,1513249368.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:48.725Z,1513249368.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:48.969Z,1513249368.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:48.984Z,1513249368.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:49.129Z,1513249369.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:49.369Z,1513249369.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:49.383Z,1513249369.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:49.747Z,1513249369.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:49.779Z,1513249369.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:49.925Z,1513249369.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:50.166Z,1513249370.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:50.215Z,1513249370.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:50.547Z,1513249370.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:50.574Z,1513249370.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:50.721Z,1513249370.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:50.947Z,1513249370.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:50.979Z,1513249370.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:51.125Z,1513249371.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:51.350Z,1513249371.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:51.376Z,1513249371.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:51.770Z,1513249371.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:51.784Z,1513249371.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:51.922Z,1513249371.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:52.186Z,1513249372.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:52.207Z,1513249372.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:52.553Z,1513249372.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:52.568Z,1513249372.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:52.718Z,1513249372.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:52.953Z,1513249372.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:52.968Z,1513249372.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:53.121Z,1513249373.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:53.396Z,1513249373.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:53.419Z,1513249373.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:53.754Z,1513249373.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:53.776Z,1513249373.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:53.917Z,1513249373.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:54.156Z,1513249374.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:54.172Z,1513249374.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:54.558Z,1513249374.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:54.573Z,1513249374.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:54.714Z,1513249374.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:54.961Z,1513249374.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:54.976Z,1513249374.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:55.118Z,1513249375.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:55.370Z,1513249375.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:55.404Z,1513249375.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:55.752Z,1513249375.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:55.775Z,1513249375.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:55.913Z,1513249375.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:56.155Z,1513249376.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:56.170Z,1513249376.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:56.575Z,1513249376.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:56.614Z,1513249376.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:56.710Z,1513249376.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:56.947Z,1513249376.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:56.974Z,1513249376.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:57.113Z,1513249377.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:57.351Z,1513249377.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:57.383Z,1513249377.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:57.760Z,1513249377.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:57.787Z,1513249377.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:57.910Z,1513249377.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:58.169Z,1513249378.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:58.246Z,1513249378.246 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:58.246Z,1513249378.246 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210
2017-12-14T11:02:58.246Z,1513249378.246 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:02:58.260Z,1513249378.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:58.260Z,1513249378.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 210
2017-12-14T11:02:58.260Z,1513249378.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:02:58.264Z,1513249378.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:58.264Z,1513249378.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210
2017-12-14T11:02:58.264Z,1513249378.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:02:58.290Z,1513249378.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:02:58.290Z,1513249378.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:02:58.290Z,1513249378.290 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:02:58.562Z,1513249378.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:58.599Z,1513249378.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:02:58.599Z,1513249378.599 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210
2017-12-14T11:02:58.599Z,1513249378.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:02:58.599Z,1513249378.599 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 210
2017-12-14T11:02:58.600Z,1513249378.600 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:02:58.600Z,1513249378.600 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210
2017-12-14T11:02:58.705Z,1513249378.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:58.957Z,1513249378.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:58.971Z,1513249378.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:02:58.971Z,1513249378.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:02:58.972Z,1513249378.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:02:58.972Z,1513249378.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:02:58.989Z,1513249378.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:02:58.989Z,1513249378.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:02:58.989Z,1513249378.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:02:58.990Z,1513249378.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:02:58.990Z,1513249378.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:02:59.109Z,1513249379.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:59.357Z,1513249379.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:59.412Z,1513249379.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:59.771Z,1513249379.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:02:59.823Z,1513249379.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:02:59.906Z,1513249379.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:00.156Z,1513249380.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:00.215Z,1513249380.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:00.575Z,1513249380.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:00.603Z,1513249380.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:00.701Z,1513249380.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:00.969Z,1513249380.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:00.993Z,1513249380.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:01.105Z,1513249381.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:01.370Z,1513249381.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:01.392Z,1513249381.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:01.759Z,1513249381.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:01.775Z,1513249381.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:01.901Z,1513249381.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:02.158Z,1513249382.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:02.173Z,1513249382.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:02.556Z,1513249382.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:02.573Z,1513249382.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:02.697Z,1513249382.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:02.978Z,1513249382.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:03.019Z,1513249383.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:03.102Z,1513249383.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:03.347Z,1513249383.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:03.385Z,1513249383.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:03.766Z,1513249383.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:03.787Z,1513249383.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:03.898Z,1513249383.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:04.170Z,1513249384.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:04.193Z,1513249384.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:04.559Z,1513249384.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:04.594Z,1513249384.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:04.693Z,1513249384.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:04.947Z,1513249384.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:04.984Z,1513249384.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:05.097Z,1513249385.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:05.347Z,1513249385.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:05.382Z,1513249385.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:05.747Z,1513249385.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:05.779Z,1513249385.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:05.893Z,1513249385.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:06.144Z,1513249386.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:06.159Z,1513249386.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:06.570Z,1513249386.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:06.599Z,1513249386.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:06.691Z,1513249386.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:06.960Z,1513249386.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:07.001Z,1513249387.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:07.101Z,1513249387.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:07.370Z,1513249387.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:07.401Z,1513249387.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:07.754Z,1513249387.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:07.772Z,1513249387.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:07.898Z,1513249387.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:08.162Z,1513249388.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:08.176Z,1513249388.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:08.547Z,1513249388.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:08.595Z,1513249388.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:08.695Z,1513249388.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:08.947Z,1513249388.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:08.983Z,1513249388.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:09.109Z,1513249389.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:09.374Z,1513249389.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:09.404Z,1513249389.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:09.766Z,1513249389.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:09.780Z,1513249389.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:09.908Z,1513249389.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:10.179Z,1513249390.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:10.195Z,1513249390.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:10.556Z,1513249390.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:10.591Z,1513249390.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:10.701Z,1513249390.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:10.952Z,1513249390.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:10.978Z,1513249390.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:11.105Z,1513249391.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:11.347Z,1513249391.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:11.378Z,1513249391.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:11.751Z,1513249391.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:11.784Z,1513249391.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:11.901Z,1513249391.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:12.140Z,1513249392.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:12.155Z,1513249392.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:12.564Z,1513249392.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:12.597Z,1513249392.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:12.698Z,1513249392.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:12.961Z,1513249392.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:12.991Z,1513249392.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:13.101Z,1513249393.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:13.363Z,1513249393.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:13.387Z,1513249393.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:13.755Z,1513249393.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:13.790Z,1513249393.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:13.898Z,1513249393.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:14.147Z,1513249394.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:14.175Z,1513249394.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:14.555Z,1513249394.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:14.570Z,1513249394.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:14.696Z,1513249394.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:14.960Z,1513249394.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:14.975Z,1513249394.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:15.101Z,1513249395.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:15.354Z,1513249395.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:15.374Z,1513249395.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:15.784Z,1513249395.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:15.824Z,1513249395.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:15.898Z,1513249395.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:16.169Z,1513249396.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:16.190Z,1513249396.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:16.578Z,1513249396.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:16.593Z,1513249396.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:16.693Z,1513249396.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:16.947Z,1513249396.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:16.979Z,1513249396.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:17.097Z,1513249397.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:17.352Z,1513249397.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:17.383Z,1513249397.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:17.748Z,1513249397.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:17.792Z,1513249397.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:17.894Z,1513249397.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:18.152Z,1513249398.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:18.168Z,1513249398.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:18.566Z,1513249398.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:18.588Z,1513249398.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:18.690Z,1513249398.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:18.965Z,1513249398.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:19.050Z,1513249399.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:19.093Z,1513249399.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:19.366Z,1513249399.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:19.389Z,1513249399.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:19.753Z,1513249399.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:19.791Z,1513249399.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:19.890Z,1513249399.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:20.154Z,1513249400.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:20.172Z,1513249400.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:20.553Z,1513249400.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:20.638Z,1513249400.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:20.687Z,1513249400.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:20.947Z,1513249400.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:20.979Z,1513249400.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:21.125Z,1513249401.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:21.364Z,1513249401.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:21.417Z,1513249401.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:21.766Z,1513249401.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:21.793Z,1513249401.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:21.922Z,1513249401.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:22.183Z,1513249402.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:22.251Z,1513249402.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:22.557Z,1513249402.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:22.595Z,1513249402.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:22.718Z,1513249402.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:22.947Z,1513249402.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:22.983Z,1513249402.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:23.121Z,1513249403.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:23.351Z,1513249403.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:23.387Z,1513249403.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:23.751Z,1513249403.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:23.766Z,1513249403.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:23.917Z,1513249403.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:24.147Z,1513249404.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:24.163Z,1513249404.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:24.713Z,1513249404.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:25.118Z,1513249405.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:25.914Z,1513249405.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:26.710Z,1513249406.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:27.113Z,1513249407.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:27.630Z,1513249407.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:27.645Z,1513249407.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:27.757Z,1513249407.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:27.790Z,1513249407.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:27.910Z,1513249407.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:28.106Z,1513249408.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:28.138Z,1513249408.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:28.503Z,1513249408.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:28.518Z,1513249408.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:28.705Z,1513249408.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:28.910Z,1513249408.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:28.926Z,1513249408.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:29.109Z,1513249409.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:29.303Z,1513249409.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:29.318Z,1513249409.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:29.708Z,1513249409.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:29.724Z,1513249409.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:29.905Z,1513249409.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:30.109Z,1513249410.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:30.124Z,1513249410.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:30.509Z,1513249410.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:30.558Z,1513249410.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:30.701Z,1513249410.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:30.894Z,1513249410.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:30.931Z,1513249410.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:31.105Z,1513249411.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:31.303Z,1513249411.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:31.318Z,1513249411.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:31.726Z,1513249411.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:31.770Z,1513249411.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:31.901Z,1513249411.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:32.097Z,1513249412.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:32.123Z,1513249412.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:32.511Z,1513249412.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:32.532Z,1513249412.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:32.697Z,1513249412.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:32.910Z,1513249412.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:32.939Z,1513249412.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:33.101Z,1513249413.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:33.315Z,1513249413.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:33.330Z,1513249413.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:33.706Z,1513249413.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:33.729Z,1513249413.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:33.898Z,1513249413.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:34.091Z,1513249414.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:34.127Z,1513249414.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:34.520Z,1513249414.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:34.535Z,1513249414.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:34.695Z,1513249414.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:34.917Z,1513249414.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:34.979Z,1513249414.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:35.102Z,1513249415.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:35.328Z,1513249415.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:35.343Z,1513249415.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:35.703Z,1513249415.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:35.733Z,1513249415.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:35.897Z,1513249415.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:36.086Z,1513249416.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:36.114Z,1513249416.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:36.500Z,1513249416.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:36.516Z,1513249416.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:36.695Z,1513249416.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:36.899Z,1513249416.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:36.919Z,1513249416.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:37.101Z,1513249417.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:37.301Z,1513249417.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:37.317Z,1513249417.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:37.714Z,1513249417.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:37.745Z,1513249417.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:37.898Z,1513249417.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:38.138Z,1513249418.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:38.163Z,1513249418.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:38.510Z,1513249418.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:38.531Z,1513249418.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:38.694Z,1513249418.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:38.894Z,1513249418.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:38.927Z,1513249418.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:39.097Z,1513249419.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:39.291Z,1513249419.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:39.315Z,1513249419.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:39.693Z,1513249419.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:39.708Z,1513249419.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:39.894Z,1513249419.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:40.092Z,1513249420.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:40.106Z,1513249420.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:40.509Z,1513249420.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:40.536Z,1513249420.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:40.689Z,1513249420.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:40.910Z,1513249420.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:40.932Z,1513249420.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:41.093Z,1513249421.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:41.310Z,1513249421.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:41.331Z,1513249421.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:41.691Z,1513249421.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:41.729Z,1513249421.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:41.890Z,1513249421.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:42.095Z,1513249422.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:42.126Z,1513249422.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:42.501Z,1513249422.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:42.575Z,1513249422.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:42.685Z,1513249422.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:42.928Z,1513249422.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:42.943Z,1513249422.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:43.089Z,1513249423.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:43.311Z,1513249423.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:43.382Z,1513249423.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:43.699Z,1513249423.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:43.736Z,1513249423.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:43.886Z,1513249423.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:44.098Z,1513249424.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:44.135Z,1513249424.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:44.532Z,1513249424.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:44.555Z,1513249424.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:44.682Z,1513249424.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:44.918Z,1513249424.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:44.947Z,1513249424.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:45.085Z,1513249425.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:45.313Z,1513249425.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:45.347Z,1513249425.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:45.690Z,1513249425.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:45.708Z,1513249425.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:45.882Z,1513249425.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:46.102Z,1513249426.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:46.116Z,1513249426.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:46.497Z,1513249426.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:46.511Z,1513249426.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:46.677Z,1513249426.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:46.903Z,1513249426.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:46.923Z,1513249426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:47.081Z,1513249427.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:47.310Z,1513249427.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:47.345Z,1513249427.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:47.749Z,1513249427.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:47.798Z,1513249427.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:47.878Z,1513249427.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:48.106Z,1513249428.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:48.121Z,1513249428.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:48.512Z,1513249428.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:48.545Z,1513249428.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:48.675Z,1513249428.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:48.900Z,1513249428.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:48.915Z,1513249428.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:49.101Z,1513249429.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:49.302Z,1513249429.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:49.316Z,1513249429.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:49.701Z,1513249429.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:49.715Z,1513249429.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:49.898Z,1513249429.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:50.100Z,1513249430.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:50.115Z,1513249430.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:50.515Z,1513249430.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:50.543Z,1513249430.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:50.695Z,1513249430.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:50.923Z,1513249430.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:50.961Z,1513249430.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:51.106Z,1513249431.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:51.304Z,1513249431.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:51.327Z,1513249431.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:51.698Z,1513249431.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:51.713Z,1513249431.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:51.902Z,1513249431.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:52.100Z,1513249432.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:52.114Z,1513249432.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:52.521Z,1513249432.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:52.564Z,1513249432.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:52.698Z,1513249432.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:52.907Z,1513249432.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:52.922Z,1513249432.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:53.101Z,1513249433.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:53.303Z,1513249433.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:53.319Z,1513249433.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:53.704Z,1513249433.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:53.718Z,1513249433.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:53.897Z,1513249433.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:54.119Z,1513249434.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:54.167Z,1513249434.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:54.509Z,1513249434.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:54.523Z,1513249434.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:54.693Z,1513249434.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:54.910Z,1513249434.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:54.925Z,1513249434.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:55.097Z,1513249435.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:55.309Z,1513249435.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:55.327Z,1513249435.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:55.702Z,1513249435.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:55.718Z,1513249435.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:55.893Z,1513249435.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:56.103Z,1513249436.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:56.123Z,1513249436.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:56.508Z,1513249436.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:56.523Z,1513249436.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:56.689Z,1513249436.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:56.922Z,1513249436.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:56.951Z,1513249436.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:57.093Z,1513249437.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:57.318Z,1513249437.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:57.362Z,1513249437.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:57.698Z,1513249437.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:57.720Z,1513249437.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:57.890Z,1513249437.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:58.098Z,1513249438.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:58.112Z,1513249438.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:58.522Z,1513249438.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:58.551Z,1513249438.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:58.688Z,1513249438.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:58.910Z,1513249438.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:58.925Z,1513249438.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:59.093Z,1513249439.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:59.308Z,1513249439.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:59.323Z,1513249439.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:59.698Z,1513249439.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:03:59.719Z,1513249439.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:03:59.889Z,1513249439.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:00.094Z,1513249440.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:00.119Z,1513249440.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:00.540Z,1513249440.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:00.572Z,1513249440.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:00.686Z,1513249440.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:00.914Z,1513249440.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:00.929Z,1513249440.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:01.089Z,1513249441.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:01.310Z,1513249441.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:01.325Z,1513249441.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:01.695Z,1513249441.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:01.717Z,1513249441.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:01.886Z,1513249441.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:02.103Z,1513249442.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:02.118Z,1513249442.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:02.514Z,1513249442.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:02.535Z,1513249442.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:02.683Z,1513249442.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:02.918Z,1513249442.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:02.933Z,1513249442.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:03.109Z,1513249443.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:03.313Z,1513249443.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:03.328Z,1513249443.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:03.720Z,1513249443.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:03.735Z,1513249443.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:03.906Z,1513249443.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:04.095Z,1513249444.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:04.166Z,1513249444.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:04.513Z,1513249444.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:04.570Z,1513249444.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:04.702Z,1513249444.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:04.922Z,1513249444.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:04.975Z,1513249444.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:05.105Z,1513249445.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:05.305Z,1513249445.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:05.327Z,1513249445.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:05.701Z,1513249445.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:05.720Z,1513249445.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:05.901Z,1513249445.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:06.102Z,1513249446.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:06.154Z,1513249446.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:06.504Z,1513249446.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:06.519Z,1513249446.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:06.697Z,1513249446.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:06.910Z,1513249446.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:06.963Z,1513249446.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:07.101Z,1513249447.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:07.307Z,1513249447.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:07.328Z,1513249447.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:07.702Z,1513249447.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:07.717Z,1513249447.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:07.897Z,1513249447.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:08.102Z,1513249448.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:08.118Z,1513249448.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:08.509Z,1513249448.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:08.531Z,1513249448.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:08.693Z,1513249448.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:08.910Z,1513249448.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:08.932Z,1513249448.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:09.097Z,1513249449.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:09.315Z,1513249449.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:09.330Z,1513249449.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:09.701Z,1513249449.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:09.723Z,1513249449.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:09.896Z,1513249449.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:10.091Z,1513249450.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:10.123Z,1513249450.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:10.511Z,1513249450.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:10.527Z,1513249450.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:10.689Z,1513249450.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:10.918Z,1513249450.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:10.933Z,1513249450.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:11.095Z,1513249451.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:11.312Z,1513249451.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:11.327Z,1513249451.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:11.707Z,1513249451.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:11.722Z,1513249451.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:11.890Z,1513249451.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:12.092Z,1513249452.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:12.127Z,1513249452.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:12.511Z,1513249452.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:12.527Z,1513249452.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:12.685Z,1513249452.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:12.911Z,1513249452.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:12.938Z,1513249452.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:13.089Z,1513249453.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:13.314Z,1513249453.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:13.331Z,1513249453.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:13.727Z,1513249453.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:13.741Z,1513249453.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:13.885Z,1513249453.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:14.088Z,1513249454.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:14.111Z,1513249454.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:14.522Z,1513249454.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:14.543Z,1513249454.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:14.681Z,1513249454.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:14.910Z,1513249454.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:14.934Z,1513249454.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:15.085Z,1513249455.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:15.301Z,1513249455.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:15.366Z,1513249455.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:15.696Z,1513249455.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:15.728Z,1513249455.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:15.882Z,1513249455.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:16.090Z,1513249456.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:16.126Z,1513249456.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:16.501Z,1513249456.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:16.532Z,1513249456.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:16.679Z,1513249456.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:16.906Z,1513249456.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:16.928Z,1513249456.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:17.105Z,1513249457.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:17.309Z,1513249457.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:17.343Z,1513249457.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:17.699Z,1513249457.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:17.738Z,1513249457.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:17.902Z,1513249457.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:18.092Z,1513249458.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:18.111Z,1513249458.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:18.506Z,1513249458.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:18.538Z,1513249458.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:18.699Z,1513249458.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:18.909Z,1513249458.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:18.936Z,1513249458.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:19.105Z,1513249459.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:19.309Z,1513249459.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:19.333Z,1513249459.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:19.697Z,1513249459.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:19.711Z,1513249459.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:19.902Z,1513249459.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:20.098Z,1513249460.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:20.113Z,1513249460.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:20.502Z,1513249460.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:20.517Z,1513249460.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:20.717Z,1513249460.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:20.913Z,1513249460.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:20.944Z,1513249460.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:21.121Z,1513249461.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:21.309Z,1513249461.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:21.323Z,1513249461.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:21.701Z,1513249461.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:21.716Z,1513249461.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:21.918Z,1513249461.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:22.097Z,1513249462.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:22.112Z,1513249462.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:22.517Z,1513249462.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:22.546Z,1513249462.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:22.713Z,1513249462.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:22.912Z,1513249462.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:22.943Z,1513249462.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:23.117Z,1513249463.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:23.309Z,1513249463.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:23.324Z,1513249463.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:23.702Z,1513249463.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:23.716Z,1513249463.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:23.914Z,1513249463.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:24.094Z,1513249464.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:24.117Z,1513249464.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:24.507Z,1513249464.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:24.528Z,1513249464.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:24.709Z,1513249464.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:25.113Z,1513249465.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:25.910Z,1513249465.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:26.705Z,1513249466.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:27.109Z,1513249467.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:27.906Z,1513249467.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:27.944Z,1513249467.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:28.035Z,1513249468.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:28.134Z,1513249468.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:28.167Z,1513249468.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:28.494Z,1513249468.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:28.527Z,1513249468.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:28.701Z,1513249468.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:28.908Z,1513249468.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:28.964Z,1513249468.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:29.105Z,1513249469.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:29.358Z,1513249469.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:29.431Z,1513249469.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:29.724Z,1513249469.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:29.775Z,1513249469.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:29.903Z,1513249469.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:30.119Z,1513249470.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:30.133Z,1513249470.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:30.518Z,1513249470.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:30.533Z,1513249470.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:30.706Z,1513249470.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:30.895Z,1513249470.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:30.922Z,1513249470.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:31.109Z,1513249471.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:31.295Z,1513249471.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:31.327Z,1513249471.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:31.699Z,1513249471.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:31.724Z,1513249471.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:31.906Z,1513249471.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:32.094Z,1513249472.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:32.119Z,1513249472.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:32.514Z,1513249472.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:32.528Z,1513249472.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:32.702Z,1513249472.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:32.929Z,1513249472.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:32.951Z,1513249472.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:33.105Z,1513249473.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:33.315Z,1513249473.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:33.335Z,1513249473.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:33.699Z,1513249473.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:33.727Z,1513249473.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:33.901Z,1513249473.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:34.092Z,1513249474.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:34.115Z,1513249474.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:34.505Z,1513249474.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:34.539Z,1513249474.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:34.697Z,1513249474.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:34.917Z,1513249474.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:34.939Z,1513249474.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:35.101Z,1513249475.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:35.318Z,1513249475.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:35.333Z,1513249475.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:35.696Z,1513249475.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:35.733Z,1513249475.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:35.899Z,1513249475.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:36.095Z,1513249476.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:36.128Z,1513249476.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:36.505Z,1513249476.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:36.533Z,1513249476.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:36.693Z,1513249476.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:36.909Z,1513249476.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:36.939Z,1513249476.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:37.097Z,1513249477.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:37.313Z,1513249477.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:37.339Z,1513249477.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:37.689Z,1513249477.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:37.712Z,1513249477.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:37.894Z,1513249477.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:38.104Z,1513249478.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:38.147Z,1513249478.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:38.512Z,1513249478.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:38.545Z,1513249478.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:38.689Z,1513249478.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:38.917Z,1513249478.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:38.953Z,1513249478.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:39.094Z,1513249479.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:39.294Z,1513249479.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:39.327Z,1513249479.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:39.718Z,1513249479.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:39.733Z,1513249479.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:39.889Z,1513249479.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:40.123Z,1513249480.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:40.138Z,1513249480.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:40.525Z,1513249480.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:40.539Z,1513249480.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:40.685Z,1513249480.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:40.896Z,1513249480.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:40.935Z,1513249480.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:41.089Z,1513249481.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:41.299Z,1513249481.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:41.330Z,1513249481.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:41.695Z,1513249481.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:41.730Z,1513249481.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:41.885Z,1513249481.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:42.111Z,1513249482.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:42.159Z,1513249482.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:42.510Z,1513249482.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:42.543Z,1513249482.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:42.681Z,1513249482.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:42.918Z,1513249482.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:42.947Z,1513249482.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:43.085Z,1513249483.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:43.319Z,1513249483.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:43.345Z,1513249483.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:43.700Z,1513249483.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:43.715Z,1513249483.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:43.882Z,1513249483.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:44.101Z,1513249484.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:44.115Z,1513249484.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:44.502Z,1513249484.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:44.517Z,1513249484.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:44.678Z,1513249484.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:44.907Z,1513249484.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:44.923Z,1513249484.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:45.085Z,1513249485.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:45.315Z,1513249485.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:45.339Z,1513249485.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:45.706Z,1513249485.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:45.722Z,1513249485.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:45.883Z,1513249485.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:46.110Z,1513249486.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:46.124Z,1513249486.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:46.541Z,1513249486.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:46.557Z,1513249486.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:46.679Z,1513249486.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:46.904Z,1513249486.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:46.920Z,1513249486.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:47.097Z,1513249487.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:47.306Z,1513249487.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:47.321Z,1513249487.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:47.707Z,1513249487.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:47.727Z,1513249487.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:47.894Z,1513249487.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:48.100Z,1513249488.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:48.127Z,1513249488.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:48.552Z,1513249488.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:48.568Z,1513249488.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:48.691Z,1513249488.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:48.930Z,1513249488.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:48.960Z,1513249488.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:49.097Z,1513249489.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:49.312Z,1513249489.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:49.339Z,1513249489.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:49.708Z,1513249489.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:49.723Z,1513249489.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:49.896Z,1513249489.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:50.106Z,1513249490.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:50.164Z,1513249490.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:50.513Z,1513249490.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:50.536Z,1513249490.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:50.689Z,1513249490.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:50.916Z,1513249490.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:50.975Z,1513249490.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:51.093Z,1513249491.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:51.319Z,1513249491.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:51.333Z,1513249491.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:51.734Z,1513249491.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:51.823Z,1513249491.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:51.890Z,1513249491.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:52.095Z,1513249492.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:52.112Z,1513249492.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:52.505Z,1513249492.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:52.534Z,1513249492.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:52.685Z,1513249492.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:52.926Z,1513249492.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:52.948Z,1513249492.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:53.089Z,1513249493.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:53.306Z,1513249493.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:53.332Z,1513249493.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:53.699Z,1513249493.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:53.713Z,1513249493.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:53.886Z,1513249493.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:54.096Z,1513249494.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:54.110Z,1513249494.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:54.506Z,1513249494.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:54.538Z,1513249494.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:54.681Z,1513249494.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:54.942Z,1513249494.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:54.969Z,1513249494.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:55.085Z,1513249495.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:55.316Z,1513249495.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:55.351Z,1513249495.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:55.700Z,1513249495.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:55.719Z,1513249495.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:55.882Z,1513249495.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:56.104Z,1513249496.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:56.118Z,1513249496.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:56.504Z,1513249496.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:56.518Z,1513249496.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:56.677Z,1513249496.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:56.898Z,1513249496.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:56.931Z,1513249496.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:57.081Z,1513249497.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:57.306Z,1513249497.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:57.327Z,1513249497.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:57.710Z,1513249497.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:57.731Z,1513249497.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:57.878Z,1513249497.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:58.127Z,1513249498.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:58.155Z,1513249498.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:58.513Z,1513249498.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:58.535Z,1513249498.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:58.676Z,1513249498.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:58.903Z,1513249498.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:58.923Z,1513249498.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:59.089Z,1513249499.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:59.298Z,1513249499.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:59.326Z,1513249499.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:59.706Z,1513249499.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:04:59.721Z,1513249499.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:04:59.886Z,1513249499.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:00.092Z,1513249500.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:00.153Z,1513249500.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:00.514Z,1513249500.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:00.529Z,1513249500.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:00.683Z,1513249500.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:00.917Z,1513249500.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:00.932Z,1513249500.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:01.096Z,1513249501.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:01.361Z,1513249501.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:01.388Z,1513249501.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:01.704Z,1513249501.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:01.723Z,1513249501.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:01.890Z,1513249501.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:02.103Z,1513249502.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:02.123Z,1513249502.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:02.514Z,1513249502.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:02.535Z,1513249502.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:02.685Z,1513249502.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:02.918Z,1513249502.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:02.933Z,1513249502.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:03.089Z,1513249503.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:03.314Z,1513249503.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:03.328Z,1513249503.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:03.704Z,1513249503.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:03.718Z,1513249503.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:03.886Z,1513249503.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:04.098Z,1513249504.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:04.124Z,1513249504.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:04.514Z,1513249504.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:04.528Z,1513249504.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:04.682Z,1513249504.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:04.923Z,1513249504.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:04.938Z,1513249504.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:05.085Z,1513249505.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:05.307Z,1513249505.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:05.333Z,1513249505.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:05.695Z,1513249505.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:05.709Z,1513249505.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:05.881Z,1513249505.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:06.092Z,1513249506.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:06.106Z,1513249506.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:06.506Z,1513249506.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:06.532Z,1513249506.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:06.679Z,1513249506.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:06.914Z,1513249506.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:06.963Z,1513249506.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:07.081Z,1513249507.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:07.310Z,1513249507.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:07.342Z,1513249507.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:07.730Z,1513249507.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:07.762Z,1513249507.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:07.878Z,1513249507.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:08.110Z,1513249508.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:08.141Z,1513249508.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:08.528Z,1513249508.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:08.543Z,1513249508.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:08.676Z,1513249508.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:08.928Z,1513249508.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:08.943Z,1513249508.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:09.081Z,1513249509.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:09.313Z,1513249509.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:09.340Z,1513249509.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:09.707Z,1513249509.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:09.741Z,1513249509.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:09.878Z,1513249509.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:10.104Z,1513249510.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:10.119Z,1513249510.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:10.504Z,1513249510.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:10.519Z,1513249510.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:10.673Z,1513249510.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:10.928Z,1513249510.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:10.982Z,1513249510.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:11.077Z,1513249511.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:11.308Z,1513249511.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:11.323Z,1513249511.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:11.710Z,1513249511.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:11.767Z,1513249511.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:11.873Z,1513249511.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:12.114Z,1513249512.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:12.128Z,1513249512.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:12.510Z,1513249512.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:12.540Z,1513249512.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:12.672Z,1513249512.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:12.895Z,1513249512.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:12.948Z,1513249512.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:13.093Z,1513249513.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:13.293Z,1513249513.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:13.322Z,1513249513.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:13.699Z,1513249513.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:13.765Z,1513249513.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:13.890Z,1513249513.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:14.114Z,1513249514.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:14.149Z,1513249514.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:14.506Z,1513249514.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:14.555Z,1513249514.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:14.687Z,1513249514.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:14.910Z,1513249514.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:14.936Z,1513249514.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:15.093Z,1513249515.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:15.305Z,1513249515.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:15.332Z,1513249515.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:15.695Z,1513249515.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:15.736Z,1513249515.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:15.889Z,1513249515.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:16.099Z,1513249516.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:16.130Z,1513249516.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:16.505Z,1513249516.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:16.533Z,1513249516.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:16.685Z,1513249516.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:16.926Z,1513249516.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:16.947Z,1513249516.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:17.089Z,1513249517.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:17.357Z,1513249517.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:17.388Z,1513249517.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:17.701Z,1513249517.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:17.716Z,1513249517.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:17.885Z,1513249517.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:18.098Z,1513249518.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:18.112Z,1513249518.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:18.506Z,1513249518.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:18.520Z,1513249518.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:18.681Z,1513249518.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:18.906Z,1513249518.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:18.922Z,1513249518.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:19.085Z,1513249519.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:19.305Z,1513249519.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:19.319Z,1513249519.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:19.717Z,1513249519.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:19.751Z,1513249519.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:19.882Z,1513249519.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:20.114Z,1513249520.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:20.145Z,1513249520.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:20.536Z,1513249520.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:20.559Z,1513249520.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:20.681Z,1513249520.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:20.907Z,1513249520.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:20.923Z,1513249520.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:21.085Z,1513249521.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:21.305Z,1513249521.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:21.320Z,1513249521.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:21.703Z,1513249521.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:21.719Z,1513249521.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:21.881Z,1513249521.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:22.102Z,1513249522.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:22.117Z,1513249522.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:22.518Z,1513249522.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:22.547Z,1513249522.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:22.680Z,1513249522.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:22.913Z,1513249522.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:22.956Z,1513249522.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:23.085Z,1513249523.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:23.318Z,1513249523.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:23.349Z,1513249523.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:23.712Z,1513249523.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:23.751Z,1513249523.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:23.882Z,1513249523.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:24.096Z,1513249524.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:24.132Z,1513249524.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:24.496Z,1513249524.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:24.531Z,1513249524.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:24.677Z,1513249524.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:25.081Z,1513249525.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:25.877Z,1513249525.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:26.675Z,1513249526.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:27.109Z,1513249527.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:27.906Z,1513249527.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:27.923Z,1513249527.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:27.938Z,1513249527.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:27.942Z,1513249527.942 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:00:27.3Z
2017-12-14T11:05:27.942Z,1513249527.942 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:05:27.942Z,1513249527.942 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:05:28.038Z,1513249528.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:28.075Z,1513249528.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:28.702Z,1513249528.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:28.927Z,1513249528.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:28.947Z,1513249528.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:29.066Z,1513249529.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:29.081Z,1513249529.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:29.105Z,1513249529.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:29.430Z,1513249529.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:29.459Z,1513249529.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:29.820Z,1513249529.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:29.858Z,1513249529.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:29.902Z,1513249529.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:30.697Z,1513249530.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:31.101Z,1513249531.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:31.898Z,1513249531.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:32.693Z,1513249532.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:33.097Z,1513249533.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:33.263Z,1513249533.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:33.304Z,1513249533.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:33.383Z,1513249533.383 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0244.lzma
2017-12-14T11:05:33.420Z,1513249533.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:33.464Z,1513249533.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:33.798Z,1513249533.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:33.813Z,1513249533.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:33.893Z,1513249533.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:34.148Z,1513249534.148 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0244.lzma.bak
2017-12-14T11:05:34.148Z,1513249534.148 [DataOverHttps](INFO): SBD MOMSN=5438616
2017-12-14T11:05:34.201Z,1513249534.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:34.216Z,1513249534.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:34.692Z,1513249534.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:35.097Z,1513249535.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:35.459Z,1513249535.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:35.547Z,1513249535.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:35.639Z,1513249535.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:35.678Z,1513249535.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:35.894Z,1513249535.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:36.690Z,1513249536.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:37.093Z,1513249537.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:37.890Z,1513249537.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:38.685Z,1513249538.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:39.089Z,1513249539.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:39.120Z,1513249539.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:39.236Z,1513249539.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:39.355Z,1513249539.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:39.394Z,1513249539.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:39.702Z,1513249539.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:39.751Z,1513249539.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:39.886Z,1513249539.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:40.109Z,1513249540.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:40.147Z,1513249540.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:40.505Z,1513249540.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:40.527Z,1513249540.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:40.683Z,1513249540.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:40.912Z,1513249540.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:40.931Z,1513249540.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:41.095Z,1513249541.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:41.889Z,1513249541.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:42.687Z,1513249542.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:43.109Z,1513249543.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:43.906Z,1513249543.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:44.459Z,1513249544.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:44.473Z,1513249544.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:44.550Z,1513249544.550 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0245.lzma
2017-12-14T11:05:44.572Z,1513249544.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:44.622Z,1513249544.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:44.702Z,1513249544.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:44.941Z,1513249544.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:44.971Z,1513249544.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:45.105Z,1513249545.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:45.299Z,1513249545.299 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0245.lzma.bak
2017-12-14T11:05:45.300Z,1513249545.300 [DataOverHttps](INFO): SBD MOMSN=5438620
2017-12-14T11:05:45.342Z,1513249545.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:45.367Z,1513249545.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:45.902Z,1513249545.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:46.669Z,1513249546.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:46.684Z,1513249546.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:46.688Z,1513249546.688 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:05:46.688Z,1513249546.688 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:05:46.688Z,1513249546.688 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:05:46.697Z,1513249546.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:46.794Z,1513249546.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:46.834Z,1513249546.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:47.101Z,1513249547.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:47.897Z,1513249547.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:48.694Z,1513249548.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:49.097Z,1513249549.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:49.894Z,1513249549.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:50.268Z,1513249550.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:50.378Z,1513249550.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:50.470Z,1513249550.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:50.511Z,1513249550.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:50.689Z,1513249550.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:50.869Z,1513249550.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:50.894Z,1513249550.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:51.093Z,1513249551.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:51.273Z,1513249551.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:51.303Z,1513249551.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:51.671Z,1513249551.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:51.695Z,1513249551.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:51.890Z,1513249551.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:52.055Z,1513249552.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:52.090Z,1513249552.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:52.465Z,1513249552.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:52.480Z,1513249552.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:52.685Z,1513249552.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:52.852Z,1513249552.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:52.887Z,1513249552.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:53.089Z,1513249553.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:53.262Z,1513249553.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:53.282Z,1513249553.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:53.677Z,1513249553.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:53.692Z,1513249553.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:53.886Z,1513249553.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:54.078Z,1513249554.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:54.092Z,1513249554.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:54.473Z,1513249554.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:54.489Z,1513249554.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:54.683Z,1513249554.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:54.851Z,1513249554.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:54.883Z,1513249554.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:55.113Z,1513249555.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:55.251Z,1513249555.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:55.288Z,1513249555.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:55.713Z,1513249555.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:55.771Z,1513249555.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:55.909Z,1513249555.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:56.066Z,1513249556.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:56.084Z,1513249556.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:56.472Z,1513249556.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:56.487Z,1513249556.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:56.706Z,1513249556.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:56.891Z,1513249556.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:56.920Z,1513249556.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:57.109Z,1513249557.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:57.273Z,1513249557.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:57.292Z,1513249557.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:57.666Z,1513249557.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:57.682Z,1513249557.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:57.906Z,1513249557.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:58.062Z,1513249558.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:58.089Z,1513249558.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:58.471Z,1513249558.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:58.488Z,1513249558.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:58.704Z,1513249558.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:58.916Z,1513249558.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:58.936Z,1513249558.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:59.109Z,1513249559.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:59.268Z,1513249559.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:59.284Z,1513249559.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:59.284Z,1513249559.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211
2017-12-14T11:05:59.284Z,1513249559.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:05:59.287Z,1513249559.287 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:59.287Z,1513249559.287 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 211
2017-12-14T11:05:59.287Z,1513249559.287 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:05:59.289Z,1513249559.289 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:05:59.290Z,1513249559.290 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211
2017-12-14T11:05:59.290Z,1513249559.290 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:05:59.302Z,1513249559.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:05:59.302Z,1513249559.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:05:59.302Z,1513249559.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:05:59.652Z,1513249559.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:05:59.688Z,1513249559.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:05:59.688Z,1513249559.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211
2017-12-14T11:05:59.690Z,1513249559.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:05:59.690Z,1513249559.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 211
2017-12-14T11:05:59.690Z,1513249559.690 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:05:59.690Z,1513249559.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211
2017-12-14T11:05:59.906Z,1513249559.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:00.065Z,1513249560.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:00.079Z,1513249560.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:06:00.079Z,1513249560.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:06:00.080Z,1513249560.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:06:00.080Z,1513249560.080 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:06:00.080Z,1513249560.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:06:00.101Z,1513249560.101 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:06:00.101Z,1513249560.101 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:06:00.102Z,1513249560.102 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:06:00.102Z,1513249560.102 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:06:00.472Z,1513249560.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:00.503Z,1513249560.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:00.701Z,1513249560.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:00.878Z,1513249560.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:00.902Z,1513249560.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:01.105Z,1513249561.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:01.271Z,1513249561.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:01.303Z,1513249561.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:01.662Z,1513249561.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:01.678Z,1513249561.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:01.901Z,1513249561.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:02.078Z,1513249562.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:02.167Z,1513249562.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:02.465Z,1513249562.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:02.534Z,1513249562.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:02.699Z,1513249562.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:02.878Z,1513249562.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:02.893Z,1513249562.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:03.105Z,1513249563.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:03.270Z,1513249563.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:03.286Z,1513249563.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:03.663Z,1513249563.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:03.722Z,1513249563.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:03.904Z,1513249563.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:04.058Z,1513249564.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:04.132Z,1513249564.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:04.470Z,1513249564.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:04.527Z,1513249564.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:04.697Z,1513249564.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:04.873Z,1513249564.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:04.888Z,1513249564.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:05.101Z,1513249565.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:05.270Z,1513249565.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:05.284Z,1513249565.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:05.672Z,1513249565.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:05.687Z,1513249565.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:05.898Z,1513249565.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:06.051Z,1513249566.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:06.082Z,1513249566.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:06.469Z,1513249566.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:06.484Z,1513249566.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:06.693Z,1513249566.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:06.886Z,1513249566.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:06.907Z,1513249566.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:07.097Z,1513249567.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:07.274Z,1513249567.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:07.303Z,1513249567.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:07.655Z,1513249567.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:07.687Z,1513249567.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:07.893Z,1513249567.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:08.048Z,1513249568.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:08.062Z,1513249568.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:08.526Z,1513249568.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:08.593Z,1513249568.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:08.691Z,1513249568.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:08.865Z,1513249568.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:08.880Z,1513249568.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:09.109Z,1513249569.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:09.272Z,1513249569.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:09.306Z,1513249569.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:09.658Z,1513249569.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:09.674Z,1513249569.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:09.906Z,1513249569.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:10.059Z,1513249570.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:10.073Z,1513249570.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:10.461Z,1513249570.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:10.476Z,1513249570.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:10.703Z,1513249570.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:10.865Z,1513249570.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:10.880Z,1513249570.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:11.109Z,1513249571.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:11.291Z,1513249571.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:11.306Z,1513249571.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:11.660Z,1513249571.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:11.679Z,1513249571.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:11.906Z,1513249571.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:12.058Z,1513249572.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:12.101Z,1513249572.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:12.461Z,1513249572.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:12.483Z,1513249572.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:12.701Z,1513249572.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:12.865Z,1513249572.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:12.919Z,1513249572.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:13.105Z,1513249573.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:13.264Z,1513249573.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:13.295Z,1513249573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:13.668Z,1513249573.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:13.682Z,1513249573.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:13.901Z,1513249573.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:14.051Z,1513249574.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:14.083Z,1513249574.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:14.469Z,1513249574.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:14.491Z,1513249574.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:14.697Z,1513249574.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:14.871Z,1513249574.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:14.928Z,1513249574.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:15.101Z,1513249575.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:15.260Z,1513249575.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:15.293Z,1513249575.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:15.660Z,1513249575.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:15.868Z,1513249575.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:15.898Z,1513249575.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:16.050Z,1513249576.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:16.077Z,1513249576.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:16.461Z,1513249576.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:16.488Z,1513249576.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:16.693Z,1513249576.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:16.894Z,1513249576.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:16.934Z,1513249576.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:17.098Z,1513249577.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:17.286Z,1513249577.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:17.301Z,1513249577.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:17.698Z,1513249577.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:17.749Z,1513249577.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:17.894Z,1513249577.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:18.080Z,1513249578.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:18.146Z,1513249578.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:18.463Z,1513249578.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:18.487Z,1513249578.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:18.690Z,1513249578.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:18.875Z,1513249578.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:18.912Z,1513249578.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:19.094Z,1513249579.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:19.298Z,1513249579.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:19.346Z,1513249579.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:19.661Z,1513249579.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:19.714Z,1513249579.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:19.890Z,1513249579.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:20.061Z,1513249580.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:20.126Z,1513249580.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:20.480Z,1513249580.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:20.527Z,1513249580.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:20.686Z,1513249580.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:20.874Z,1513249580.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:20.896Z,1513249580.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:21.089Z,1513249581.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:21.293Z,1513249581.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:21.347Z,1513249581.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:21.652Z,1513249581.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:21.683Z,1513249581.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:21.894Z,1513249581.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:22.055Z,1513249582.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:22.087Z,1513249582.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:22.461Z,1513249582.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:22.492Z,1513249582.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:22.697Z,1513249582.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:22.866Z,1513249582.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:22.895Z,1513249582.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:23.105Z,1513249583.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:23.262Z,1513249583.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:23.300Z,1513249583.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:23.652Z,1513249583.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:23.694Z,1513249583.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:23.902Z,1513249583.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:24.054Z,1513249584.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:24.094Z,1513249584.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:24.467Z,1513249584.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:24.505Z,1513249584.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:24.699Z,1513249584.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:24.872Z,1513249584.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:25.054Z,1513249585.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:25.113Z,1513249585.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:25.296Z,1513249585.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:25.320Z,1513249585.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:25.663Z,1513249585.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:25.724Z,1513249585.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:25.910Z,1513249585.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:26.063Z,1513249586.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:26.091Z,1513249586.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:26.468Z,1513249586.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:26.519Z,1513249586.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:26.705Z,1513249586.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:26.869Z,1513249586.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:26.895Z,1513249586.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:27.109Z,1513249587.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:27.273Z,1513249587.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:27.288Z,1513249587.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:27.663Z,1513249587.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:27.678Z,1513249587.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:27.906Z,1513249587.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:28.117Z,1513249588.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:28.155Z,1513249588.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:28.465Z,1513249588.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:28.495Z,1513249588.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:28.701Z,1513249588.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:28.869Z,1513249588.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:28.896Z,1513249588.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:29.105Z,1513249589.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:29.271Z,1513249589.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:29.312Z,1513249589.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:29.656Z,1513249589.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:29.670Z,1513249589.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:29.901Z,1513249589.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:30.053Z,1513249590.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:30.068Z,1513249590.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:30.470Z,1513249590.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:30.496Z,1513249590.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:30.698Z,1513249590.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:30.879Z,1513249590.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:30.917Z,1513249590.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:31.101Z,1513249591.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:31.280Z,1513249591.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:31.314Z,1513249591.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:31.660Z,1513249591.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:31.711Z,1513249591.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:31.898Z,1513249591.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:32.059Z,1513249592.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:32.074Z,1513249592.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:32.478Z,1513249592.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:32.514Z,1513249592.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:32.695Z,1513249592.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:32.882Z,1513249592.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:32.911Z,1513249592.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:33.098Z,1513249593.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:33.309Z,1513249593.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:33.331Z,1513249593.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:33.686Z,1513249593.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:33.708Z,1513249593.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:33.894Z,1513249593.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:34.086Z,1513249594.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:34.117Z,1513249594.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:34.476Z,1513249594.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:34.521Z,1513249594.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:34.690Z,1513249594.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:34.891Z,1513249594.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:34.996Z,1513249594.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:35.094Z,1513249595.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:35.282Z,1513249595.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:35.313Z,1513249595.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:35.683Z,1513249595.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:35.698Z,1513249595.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:35.890Z,1513249595.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:36.080Z,1513249596.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:36.128Z,1513249596.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:36.480Z,1513249596.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:36.500Z,1513249596.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:36.687Z,1513249596.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:36.885Z,1513249596.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:36.936Z,1513249596.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:37.117Z,1513249597.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:37.280Z,1513249597.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:37.304Z,1513249597.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:37.679Z,1513249597.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:37.707Z,1513249597.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:37.914Z,1513249597.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:38.054Z,1513249598.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:38.101Z,1513249598.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:38.464Z,1513249598.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:38.492Z,1513249598.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:38.710Z,1513249598.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:38.868Z,1513249598.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:38.892Z,1513249598.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:39.114Z,1513249599.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:39.268Z,1513249599.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:39.323Z,1513249599.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:39.657Z,1513249599.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:39.698Z,1513249599.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:39.911Z,1513249599.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:40.092Z,1513249600.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:40.142Z,1513249600.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:40.483Z,1513249600.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:40.532Z,1513249600.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:40.706Z,1513249600.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:40.877Z,1513249600.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:40.896Z,1513249600.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:41.110Z,1513249601.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:41.275Z,1513249601.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:41.334Z,1513249601.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:41.674Z,1513249601.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:41.747Z,1513249601.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:41.907Z,1513249601.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:42.057Z,1513249602.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:42.124Z,1513249602.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:42.464Z,1513249602.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:42.519Z,1513249602.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:42.702Z,1513249602.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:42.868Z,1513249602.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:42.912Z,1513249602.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:43.105Z,1513249603.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:43.265Z,1513249603.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:43.280Z,1513249603.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:43.662Z,1513249603.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:43.685Z,1513249603.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:43.904Z,1513249603.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:44.052Z,1513249604.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:44.091Z,1513249604.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:44.470Z,1513249604.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:44.500Z,1513249604.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:44.698Z,1513249604.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:44.867Z,1513249604.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:44.951Z,1513249604.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:45.102Z,1513249605.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:45.281Z,1513249605.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:45.307Z,1513249605.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:45.653Z,1513249605.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:45.691Z,1513249605.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:45.900Z,1513249605.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:46.060Z,1513249606.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:46.070Z,1513249606.070 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T11:06:46.070Z,1513249606.070 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:06:46.070Z,1513249606.070 [BPC1](ERROR): Data Fault
2017-12-14T11:06:46.082Z,1513249606.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:46.145Z,1513249606.145 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:06:46.471Z,1513249606.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:46.542Z,1513249606.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:46.694Z,1513249606.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:46.884Z,1513249606.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:46.919Z,1513249606.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:47.098Z,1513249607.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:47.317Z,1513249607.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:47.340Z,1513249607.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:47.395Z,1513249607.395 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:06:47.395Z,1513249607.395 [BPC1] No Fault, FailCount= 1
2017-12-14T11:06:47.894Z,1513249607.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:48.690Z,1513249608.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:49.093Z,1513249609.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:49.890Z,1513249609.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:50.687Z,1513249610.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:51.113Z,1513249611.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:51.912Z,1513249611.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:52.706Z,1513249612.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:53.118Z,1513249613.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:53.914Z,1513249613.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:54.024Z,1513249614.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:54.130Z,1513249614.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:54.241Z,1513249614.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:54.316Z,1513249614.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:54.632Z,1513249614.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:54.700Z,1513249614.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:54.710Z,1513249614.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:55.044Z,1513249615.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:55.090Z,1513249615.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:55.113Z,1513249615.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:55.431Z,1513249615.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:55.478Z,1513249615.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:55.818Z,1513249615.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:55.837Z,1513249615.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:55.911Z,1513249615.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:56.217Z,1513249616.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:56.240Z,1513249616.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:56.620Z,1513249616.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:56.635Z,1513249616.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:56.706Z,1513249616.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:57.079Z,1513249617.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:57.094Z,1513249617.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:57.109Z,1513249617.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:57.418Z,1513249617.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:57.446Z,1513249617.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:57.829Z,1513249617.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:57.845Z,1513249617.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:57.906Z,1513249617.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:58.238Z,1513249618.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:58.257Z,1513249618.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:58.621Z,1513249618.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:58.657Z,1513249618.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:58.701Z,1513249618.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:59.015Z,1513249619.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:59.051Z,1513249619.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:59.105Z,1513249619.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:59.416Z,1513249619.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:59.451Z,1513249619.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:59.816Z,1513249619.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:06:59.859Z,1513249619.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:06:59.902Z,1513249619.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:00.206Z,1513249620.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:00.221Z,1513249620.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:00.622Z,1513249620.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:00.654Z,1513249620.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:00.697Z,1513249620.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:01.029Z,1513249621.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:01.060Z,1513249621.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:01.101Z,1513249621.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:01.429Z,1513249621.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:01.444Z,1513249621.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:01.825Z,1513249621.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:01.840Z,1513249621.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:01.898Z,1513249621.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:02.223Z,1513249622.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:02.276Z,1513249622.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:02.617Z,1513249622.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:02.632Z,1513249622.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:02.693Z,1513249622.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:03.013Z,1513249623.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:03.044Z,1513249623.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:03.097Z,1513249623.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:03.415Z,1513249623.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:03.435Z,1513249623.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:03.830Z,1513249623.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:03.861Z,1513249623.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:03.894Z,1513249623.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:04.272Z,1513249624.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:04.311Z,1513249624.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:04.634Z,1513249624.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:04.690Z,1513249624.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:04.726Z,1513249624.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:05.019Z,1513249625.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:05.056Z,1513249625.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:05.122Z,1513249625.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:05.423Z,1513249625.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:05.446Z,1513249625.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:05.825Z,1513249625.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:05.840Z,1513249625.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:05.917Z,1513249625.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:06.218Z,1513249626.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:06.245Z,1513249626.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:06.628Z,1513249626.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:06.715Z,1513249626.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:06.741Z,1513249626.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:07.042Z,1513249627.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:07.063Z,1513249627.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:07.117Z,1513249627.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:07.457Z,1513249627.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:07.539Z,1513249627.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:07.811Z,1513249627.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:07.847Z,1513249627.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:07.914Z,1513249627.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:08.211Z,1513249628.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:08.246Z,1513249628.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:08.663Z,1513249628.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:08.678Z,1513249628.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:08.709Z,1513249628.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:09.019Z,1513249629.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:09.055Z,1513249629.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:09.113Z,1513249629.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:09.430Z,1513249629.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:09.464Z,1513249629.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:09.840Z,1513249629.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:09.862Z,1513249629.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:09.910Z,1513249629.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:10.230Z,1513249630.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:10.267Z,1513249630.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:10.619Z,1513249630.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:10.706Z,1513249630.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:10.722Z,1513249630.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:11.020Z,1513249631.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:11.035Z,1513249631.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:11.109Z,1513249631.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:11.436Z,1513249631.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:11.463Z,1513249631.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:11.821Z,1513249631.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:11.843Z,1513249631.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:11.906Z,1513249631.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:12.234Z,1513249632.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:12.271Z,1513249632.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:12.622Z,1513249632.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:12.662Z,1513249632.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:12.701Z,1513249632.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.011Z,1513249633.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.028Z,1513249633.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:13.105Z,1513249633.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.411Z,1513249633.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.432Z,1513249633.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:13.819Z,1513249633.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.902Z,1513249633.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:13.916Z,1513249633.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:14.221Z,1513249634.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:14.236Z,1513249634.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:14.634Z,1513249634.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:14.656Z,1513249634.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:14.697Z,1513249634.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:15.035Z,1513249635.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:15.101Z,1513249635.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:15.181Z,1513249635.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:15.432Z,1513249635.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:15.459Z,1513249635.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:15.804Z,1513249635.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:15.875Z,1513249635.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:15.898Z,1513249635.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:16.213Z,1513249636.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:16.252Z,1513249636.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:16.621Z,1513249636.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:16.642Z,1513249636.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:16.693Z,1513249636.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:17.015Z,1513249637.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:17.054Z,1513249637.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:17.098Z,1513249637.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:17.411Z,1513249637.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:17.438Z,1513249637.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:17.830Z,1513249637.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:17.852Z,1513249637.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:17.894Z,1513249637.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:18.228Z,1513249638.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:18.251Z,1513249638.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:18.634Z,1513249638.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:18.691Z,1513249638.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:18.714Z,1513249638.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:19.017Z,1513249639.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:19.047Z,1513249639.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:19.129Z,1513249639.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:19.412Z,1513249639.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:19.457Z,1513249639.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:19.819Z,1513249639.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:19.859Z,1513249639.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:19.926Z,1513249639.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:20.251Z,1513249640.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:20.278Z,1513249640.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:20.622Z,1513249640.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:20.637Z,1513249640.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:20.722Z,1513249640.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:21.032Z,1513249641.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:21.062Z,1513249641.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:21.125Z,1513249641.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:21.442Z,1513249641.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:21.456Z,1513249641.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:21.804Z,1513249641.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:21.846Z,1513249641.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:21.922Z,1513249641.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:22.265Z,1513249642.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:22.290Z,1513249642.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:22.604Z,1513249642.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:22.648Z,1513249642.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:22.717Z,1513249642.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:23.012Z,1513249643.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:23.054Z,1513249643.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:23.121Z,1513249643.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:23.435Z,1513249643.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:23.499Z,1513249643.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:23.837Z,1513249643.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:23.852Z,1513249643.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:23.917Z,1513249643.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:24.223Z,1513249644.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:24.294Z,1513249644.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:24.644Z,1513249644.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:24.666Z,1513249644.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:24.713Z,1513249644.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:25.020Z,1513249645.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:25.048Z,1513249645.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:25.118Z,1513249645.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:25.420Z,1513249645.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:25.448Z,1513249645.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:25.819Z,1513249645.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:25.859Z,1513249645.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:25.914Z,1513249645.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:26.214Z,1513249646.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:26.230Z,1513249646.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:26.645Z,1513249646.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:26.677Z,1513249646.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:26.709Z,1513249646.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:27.026Z,1513249647.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:27.047Z,1513249647.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:27.113Z,1513249647.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:27.424Z,1513249647.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:27.440Z,1513249647.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:27.818Z,1513249647.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:27.842Z,1513249647.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:27.910Z,1513249647.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:28.221Z,1513249648.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:28.235Z,1513249648.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:28.633Z,1513249648.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:28.649Z,1513249648.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:28.705Z,1513249648.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.014Z,1513249649.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.048Z,1513249649.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:29.109Z,1513249649.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.450Z,1513249649.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.492Z,1513249649.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:29.835Z,1513249649.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.906Z,1513249649.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:29.908Z,1513249649.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:30.226Z,1513249650.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:30.254Z,1513249650.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:30.639Z,1513249650.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:30.663Z,1513249650.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:30.702Z,1513249650.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:31.011Z,1513249651.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:31.060Z,1513249651.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:31.105Z,1513249651.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:31.411Z,1513249651.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:31.452Z,1513249651.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:31.815Z,1513249651.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:31.830Z,1513249651.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:31.902Z,1513249651.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:32.215Z,1513249652.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:32.229Z,1513249652.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:32.673Z,1513249652.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:32.699Z,1513249652.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:32.732Z,1513249652.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:33.084Z,1513249653.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:33.109Z,1513249653.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:33.113Z,1513249653.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:33.429Z,1513249653.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:33.465Z,1513249653.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:33.811Z,1513249653.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:33.836Z,1513249653.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:33.910Z,1513249653.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:34.210Z,1513249654.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:34.255Z,1513249654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:34.614Z,1513249654.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:34.675Z,1513249654.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:34.710Z,1513249654.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:35.028Z,1513249655.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:35.088Z,1513249655.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:35.113Z,1513249655.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:35.420Z,1513249655.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:35.435Z,1513249655.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:35.836Z,1513249655.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:35.862Z,1513249655.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:35.910Z,1513249655.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:36.250Z,1513249656.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:36.283Z,1513249656.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:36.630Z,1513249656.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:36.697Z,1513249656.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:36.705Z,1513249656.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:37.012Z,1513249657.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:37.039Z,1513249657.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:37.109Z,1513249657.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:37.454Z,1513249657.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:37.503Z,1513249657.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:37.815Z,1513249657.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:37.852Z,1513249657.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:37.905Z,1513249657.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:38.214Z,1513249658.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:38.278Z,1513249658.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:38.629Z,1513249658.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:38.659Z,1513249658.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:38.773Z,1513249658.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:39.025Z,1513249659.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:39.048Z,1513249659.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:39.177Z,1513249659.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:39.425Z,1513249659.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:39.447Z,1513249659.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:39.811Z,1513249659.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:39.838Z,1513249659.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:39.974Z,1513249659.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:40.210Z,1513249660.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:40.235Z,1513249660.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:40.610Z,1513249660.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:40.642Z,1513249660.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:40.754Z,1513249660.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:41.011Z,1513249661.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:41.038Z,1513249661.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:41.427Z,1513249661.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:41.442Z,1513249661.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:41.549Z,1513249661.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:41.835Z,1513249661.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:41.856Z,1513249661.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:42.224Z,1513249662.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:42.248Z,1513249662.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:42.349Z,1513249662.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:42.639Z,1513249662.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:42.690Z,1513249662.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:42.765Z,1513249662.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:43.043Z,1513249663.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:43.065Z,1513249663.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:43.419Z,1513249663.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:43.459Z,1513249663.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:43.562Z,1513249663.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:43.819Z,1513249663.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:43.862Z,1513249663.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:44.219Z,1513249664.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:44.234Z,1513249664.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:44.359Z,1513249664.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:44.635Z,1513249664.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:44.666Z,1513249664.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:44.797Z,1513249664.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:45.029Z,1513249665.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:45.062Z,1513249665.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:45.425Z,1513249665.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:45.460Z,1513249665.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:45.596Z,1513249665.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:45.816Z,1513249665.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:45.835Z,1513249665.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:46.228Z,1513249666.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:46.243Z,1513249666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:46.389Z,1513249666.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:46.624Z,1513249666.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:46.720Z,1513249666.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:47.012Z,1513249667.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:47.045Z,1513249667.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:47.114Z,1513249667.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:47.411Z,1513249667.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:47.436Z,1513249667.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:47.910Z,1513249667.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:48.706Z,1513249668.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:49.110Z,1513249669.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:49.905Z,1513249669.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:50.701Z,1513249670.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:50.962Z,1513249670.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:50.984Z,1513249670.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:51.103Z,1513249671.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:51.105Z,1513249671.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:51.140Z,1513249671.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:51.459Z,1513249671.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:51.486Z,1513249671.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:51.847Z,1513249671.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:51.862Z,1513249671.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:51.902Z,1513249671.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:52.260Z,1513249672.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:52.389Z,1513249672.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:52.639Z,1513249672.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:52.674Z,1513249672.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:52.697Z,1513249672.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:53.047Z,1513249673.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:53.064Z,1513249673.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:53.101Z,1513249673.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:53.450Z,1513249673.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:53.475Z,1513249673.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:53.855Z,1513249673.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:53.887Z,1513249673.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:53.897Z,1513249673.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:54.255Z,1513249674.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:54.271Z,1513249674.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T11:07:54.292Z,1513249674.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:54.654Z,1513249674.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:54.669Z,1513249674.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:54.694Z,1513249674.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:55.035Z,1513249675.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:55.065Z,1513249675.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:55.097Z,1513249675.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:55.443Z,1513249675.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:55.474Z,1513249675.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:55.831Z,1513249675.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:55.865Z,1513249675.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:55.894Z,1513249675.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:56.232Z,1513249676.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:56.266Z,1513249676.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:56.650Z,1513249676.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:56.680Z,1513249676.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:56.689Z,1513249676.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:57.054Z,1513249677.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:57.091Z,1513249677.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:57.093Z,1513249677.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:57.460Z,1513249677.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:57.467Z,1513249677.467 [PNI_TCM](ERROR): CRC does not match. Expected:0x59434 got:0x36835
2017-12-14T11:07:57.534Z,1513249677.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:57.839Z,1513249677.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:57.869Z,1513249677.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:57.889Z,1513249677.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:58.238Z,1513249678.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:58.295Z,1513249678.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:58.659Z,1513249678.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:58.686Z,1513249678.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:58.705Z,1513249678.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:59.031Z,1513249679.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:59.066Z,1513249679.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:59.089Z,1513249679.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:59.435Z,1513249679.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:59.502Z,1513249679.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:59.850Z,1513249679.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:07:59.879Z,1513249679.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:07:59.887Z,1513249679.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:00.255Z,1513249680.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:00.315Z,1513249680.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:00.662Z,1513249680.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:00.683Z,1513249680.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:00.720Z,1513249680.720 [PNI_TCM](ERROR): CRC does not match. Expected:0x39158 got:0x23370
2017-12-14T11:08:00.772Z,1513249680.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:01.036Z,1513249681.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:01.082Z,1513249681.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:01.117Z,1513249681.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:01.443Z,1513249681.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:01.451Z,1513249681.451 [PNI_TCM](ERROR): CRC does not match. Expected:0x20849 got:0x366
2017-12-14T11:08:01.477Z,1513249681.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:01.868Z,1513249681.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:01.900Z,1513249681.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:01.914Z,1513249681.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:02.243Z,1513249682.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:02.283Z,1513249682.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:02.625Z,1513249682.625 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T11:08:02.625Z,1513249682.625 [NAL9602] Data Fault, FailCount= 3
2017-12-14T11:08:02.625Z,1513249682.625 [NAL9602](ERROR): Data Fault
2017-12-14T11:08:02.664Z,1513249682.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:02.710Z,1513249682.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:02.748Z,1513249682.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:02.785Z,1513249682.785 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T11:08:03.018Z,1513249683.018 [NAL9602](INFO): Powering down
2017-12-14T11:08:03.058Z,1513249683.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:03.073Z,1513249683.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:03.117Z,1513249683.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:03.441Z,1513249683.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:03.490Z,1513249683.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:03.839Z,1513249683.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:03.861Z,1513249683.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:03.875Z,1513249683.875 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T11:08:03.875Z,1513249683.875 [NAL9602] No Fault, FailCount= 3
2017-12-14T11:08:03.914Z,1513249683.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:04.240Z,1513249684.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:04.264Z,1513249684.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:04.632Z,1513249684.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:04.662Z,1513249684.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:04.709Z,1513249684.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:05.055Z,1513249685.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:05.113Z,1513249685.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:05.115Z,1513249685.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:05.436Z,1513249685.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:05.464Z,1513249685.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T11:08:05.491Z,1513249685.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:05.837Z,1513249685.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:05.876Z,1513249685.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:05.910Z,1513249685.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:06.241Z,1513249686.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:06.269Z,1513249686.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:06.636Z,1513249686.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:06.682Z,1513249686.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:06.705Z,1513249686.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:07.040Z,1513249687.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:07.072Z,1513249687.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:07.109Z,1513249687.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:07.435Z,1513249687.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:07.457Z,1513249687.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:07.840Z,1513249687.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:07.868Z,1513249687.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:07.906Z,1513249687.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:08.264Z,1513249688.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:08.287Z,1513249688.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:08.630Z,1513249688.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:08.700Z,1513249688.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:08.701Z,1513249688.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:09.030Z,1513249689.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:09.059Z,1513249689.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:09.105Z,1513249689.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:09.426Z,1513249689.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:09.448Z,1513249689.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:09.826Z,1513249689.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:09.859Z,1513249689.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:09.902Z,1513249689.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:10.231Z,1513249690.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:10.285Z,1513249690.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:10.630Z,1513249690.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:10.653Z,1513249690.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:10.697Z,1513249690.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:11.031Z,1513249691.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:11.086Z,1513249691.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:11.101Z,1513249691.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:11.431Z,1513249691.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:11.483Z,1513249691.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:11.838Z,1513249691.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:11.857Z,1513249691.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:11.898Z,1513249691.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:12.244Z,1513249692.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:12.335Z,1513249692.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:12.642Z,1513249692.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:12.669Z,1513249692.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:12.693Z,1513249692.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:13.034Z,1513249693.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:13.059Z,1513249693.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:13.097Z,1513249693.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:13.430Z,1513249693.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:13.470Z,1513249693.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:13.836Z,1513249693.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:13.859Z,1513249693.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:13.894Z,1513249693.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:14.244Z,1513249694.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:14.259Z,1513249694.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:14.691Z,1513249694.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:14.708Z,1513249694.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:14.756Z,1513249694.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:15.031Z,1513249695.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:15.079Z,1513249695.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:15.137Z,1513249695.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:15.434Z,1513249695.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:15.469Z,1513249695.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:15.838Z,1513249695.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:15.865Z,1513249695.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:15.934Z,1513249695.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:16.230Z,1513249696.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:16.276Z,1513249696.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:16.630Z,1513249696.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:16.722Z,1513249696.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:16.730Z,1513249696.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:17.052Z,1513249697.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:17.089Z,1513249697.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:17.133Z,1513249697.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:17.443Z,1513249697.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:17.457Z,1513249697.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:17.833Z,1513249697.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:17.862Z,1513249697.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:17.930Z,1513249697.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:18.238Z,1513249698.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:18.264Z,1513249698.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:18.634Z,1513249698.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:18.663Z,1513249698.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:18.725Z,1513249698.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.051Z,1513249699.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.066Z,1513249699.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:19.129Z,1513249699.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.430Z,1513249699.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.467Z,1513249699.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:19.834Z,1513249699.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.881Z,1513249699.881 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T11:08:19.881Z,1513249699.881 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:08:19.881Z,1513249699.881 [BPC1](ERROR): Data Fault
2017-12-14T11:08:19.919Z,1513249699.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:19.926Z,1513249699.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:19.947Z,1513249699.947 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:08:20.230Z,1513249700.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:20.260Z,1513249700.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:20.631Z,1513249700.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:20.673Z,1513249700.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:20.721Z,1513249700.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:21.070Z,1513249701.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:21.098Z,1513249701.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:21.125Z,1513249701.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:21.146Z,1513249701.146 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:08:21.146Z,1513249701.146 [BPC1] No Fault, FailCount= 1
2017-12-14T11:08:21.438Z,1513249701.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:21.515Z,1513249701.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:21.842Z,1513249701.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:21.863Z,1513249701.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:21.923Z,1513249701.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:22.243Z,1513249702.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:22.258Z,1513249702.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:22.630Z,1513249702.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:22.667Z,1513249702.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:22.717Z,1513249702.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:23.054Z,1513249703.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:23.074Z,1513249703.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:23.121Z,1513249703.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:23.435Z,1513249703.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:23.470Z,1513249703.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:23.848Z,1513249703.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:23.863Z,1513249703.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:23.918Z,1513249703.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:24.258Z,1513249704.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:24.371Z,1513249704.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:24.638Z,1513249704.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:24.676Z,1513249704.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:24.713Z,1513249704.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:25.038Z,1513249705.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:25.079Z,1513249705.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:25.118Z,1513249705.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:25.442Z,1513249705.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:25.456Z,1513249705.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:25.831Z,1513249705.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:25.875Z,1513249705.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:25.914Z,1513249705.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:26.239Z,1513249706.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:26.260Z,1513249706.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:26.641Z,1513249706.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:26.684Z,1513249706.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:26.709Z,1513249706.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:27.041Z,1513249707.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:27.056Z,1513249707.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:27.115Z,1513249707.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:27.438Z,1513249707.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:27.475Z,1513249707.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:27.830Z,1513249707.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:27.875Z,1513249707.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:27.910Z,1513249707.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:28.224Z,1513249708.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:28.239Z,1513249708.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:28.630Z,1513249708.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:28.706Z,1513249708.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:28.723Z,1513249708.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:29.036Z,1513249709.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:29.079Z,1513249709.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:29.117Z,1513249709.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:29.440Z,1513249709.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:29.463Z,1513249709.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:29.844Z,1513249709.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:29.896Z,1513249709.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:29.913Z,1513249709.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:30.247Z,1513249710.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:30.262Z,1513249710.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:30.695Z,1513249710.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:30.709Z,1513249710.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:30.744Z,1513249710.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:31.030Z,1513249711.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:31.067Z,1513249711.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:31.133Z,1513249711.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:31.432Z,1513249711.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:31.475Z,1513249711.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:31.836Z,1513249711.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:31.866Z,1513249711.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:31.930Z,1513249711.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:32.231Z,1513249712.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:32.281Z,1513249712.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:32.643Z,1513249712.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:32.683Z,1513249712.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:32.725Z,1513249712.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:33.035Z,1513249713.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:33.074Z,1513249713.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:33.129Z,1513249713.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:33.418Z,1513249713.418 [NAL9602](INFO): Powering up NAL9602
2017-12-14T11:08:33.440Z,1513249713.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:33.455Z,1513249713.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:33.833Z,1513249713.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:33.883Z,1513249713.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:33.926Z,1513249713.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:34.239Z,1513249714.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:34.261Z,1513249714.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:34.637Z,1513249714.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:34.667Z,1513249714.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:34.721Z,1513249714.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:35.029Z,1513249715.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:35.063Z,1513249715.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:35.125Z,1513249715.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:35.430Z,1513249715.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:35.475Z,1513249715.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:35.843Z,1513249715.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:35.863Z,1513249715.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:35.921Z,1513249715.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:36.247Z,1513249716.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:36.268Z,1513249716.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:36.632Z,1513249716.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:36.673Z,1513249716.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:36.717Z,1513249716.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:37.030Z,1513249717.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:37.079Z,1513249717.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:37.121Z,1513249717.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:37.436Z,1513249717.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:37.475Z,1513249717.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:37.845Z,1513249717.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:37.864Z,1513249717.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:37.918Z,1513249717.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:38.247Z,1513249718.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:38.261Z,1513249718.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:38.632Z,1513249718.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:38.675Z,1513249718.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:38.713Z,1513249718.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:39.044Z,1513249719.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:39.066Z,1513249719.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:39.117Z,1513249719.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:39.429Z,1513249719.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:39.463Z,1513249719.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:39.852Z,1513249719.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:39.868Z,1513249719.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:40.272Z,1513249720.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:40.411Z,1513249720.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:40.646Z,1513249720.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:40.676Z,1513249720.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:41.037Z,1513249721.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:41.051Z,1513249721.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x48563 got:0x6977
2017-12-14T11:08:41.078Z,1513249721.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:41.443Z,1513249721.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:41.470Z,1513249721.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:41.837Z,1513249721.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:41.882Z,1513249721.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:42.236Z,1513249722.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:42.304Z,1513249722.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:42.674Z,1513249722.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:42.746Z,1513249722.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:43.041Z,1513249723.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:43.079Z,1513249723.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:43.435Z,1513249723.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:43.484Z,1513249723.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:43.840Z,1513249723.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:43.898Z,1513249723.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:44.260Z,1513249724.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:44.282Z,1513249724.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:44.620Z,1513249724.620 [NAL9602](INFO): NAL9602 initialized
2017-12-14T11:08:44.656Z,1513249724.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:44.729Z,1513249724.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:45.046Z,1513249725.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:45.092Z,1513249725.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:45.449Z,1513249725.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:45.485Z,1513249725.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:45.859Z,1513249725.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:45.874Z,1513249725.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:46.262Z,1513249726.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:46.277Z,1513249726.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:46.631Z,1513249726.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:46.683Z,1513249726.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:47.031Z,1513249727.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:47.079Z,1513249727.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:47.439Z,1513249727.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:47.473Z,1513249727.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:50.974Z,1513249730.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:50.991Z,1513249730.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:51.103Z,1513249731.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:51.135Z,1513249731.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:51.483Z,1513249731.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:51.508Z,1513249731.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:51.884Z,1513249731.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:51.939Z,1513249731.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:52.276Z,1513249732.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:52.344Z,1513249732.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:52.682Z,1513249732.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:52.698Z,1513249732.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:53.098Z,1513249733.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:53.144Z,1513249733.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:53.472Z,1513249733.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:53.498Z,1513249733.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:53.868Z,1513249733.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:53.894Z,1513249733.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:54.268Z,1513249734.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:54.294Z,1513249734.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:54.684Z,1513249734.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:54.708Z,1513249734.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:55.097Z,1513249735.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:55.120Z,1513249735.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:55.482Z,1513249735.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:55.512Z,1513249735.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:55.871Z,1513249735.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:55.902Z,1513249735.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:56.311Z,1513249736.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:56.360Z,1513249736.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:56.721Z,1513249736.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:56.779Z,1513249736.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:57.081Z,1513249737.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:57.111Z,1513249737.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:57.480Z,1513249737.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:57.508Z,1513249737.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:57.866Z,1513249737.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:57.884Z,1513249737.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:58.274Z,1513249738.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:58.289Z,1513249738.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:58.746Z,1513249738.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:58.778Z,1513249738.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:59.089Z,1513249739.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:59.104Z,1513249739.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:59.492Z,1513249739.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:59.532Z,1513249739.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:08:59.875Z,1513249739.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:08:59.890Z,1513249739.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:00.275Z,1513249740.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:00.335Z,1513249740.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:00.335Z,1513249740.335 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212
2017-12-14T11:09:00.335Z,1513249740.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:09:00.361Z,1513249740.361 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:00.362Z,1513249740.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 212
2017-12-14T11:09:00.362Z,1513249740.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:09:00.364Z,1513249740.364 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:00.364Z,1513249740.364 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212
2017-12-14T11:09:00.364Z,1513249740.364 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:09:00.407Z,1513249740.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:09:00.407Z,1513249740.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:09:00.407Z,1513249740.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:09:00.694Z,1513249740.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:00.720Z,1513249740.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:09:00.720Z,1513249740.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212
2017-12-14T11:09:00.720Z,1513249740.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:09:00.720Z,1513249740.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 212
2017-12-14T11:09:00.721Z,1513249740.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:09:00.721Z,1513249740.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212
2017-12-14T11:09:01.095Z,1513249741.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:01.114Z,1513249741.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:09:01.114Z,1513249741.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:09:01.114Z,1513249741.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:09:01.115Z,1513249741.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:09:01.115Z,1513249741.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:09:01.115Z,1513249741.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:09:01.116Z,1513249741.116 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:09:01.116Z,1513249741.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:09:01.116Z,1513249741.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:09:01.473Z,1513249741.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:01.490Z,1513249741.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:01.873Z,1513249741.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:01.888Z,1513249741.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:02.272Z,1513249742.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:02.287Z,1513249742.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:02.696Z,1513249742.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:02.738Z,1513249742.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:03.084Z,1513249743.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:03.150Z,1513249743.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:03.490Z,1513249743.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:03.507Z,1513249743.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:03.865Z,1513249743.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:03.890Z,1513249743.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:04.258Z,1513249744.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:04.357Z,1513249744.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:04.688Z,1513249744.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:04.703Z,1513249744.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:05.087Z,1513249745.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:05.107Z,1513249745.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:05.479Z,1513249745.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:05.509Z,1513249745.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:05.867Z,1513249745.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:05.920Z,1513249745.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:06.270Z,1513249746.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:06.364Z,1513249746.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:06.674Z,1513249746.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:06.695Z,1513249746.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:07.077Z,1513249747.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:07.085Z,1513249747.085 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:09:07.085Z,1513249747.085 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:09:07.085Z,1513249747.085 [BPC1](ERROR): Communications Fault
2017-12-14T11:09:07.099Z,1513249747.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:07.149Z,1513249747.149 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:09:07.479Z,1513249747.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:07.502Z,1513249747.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:07.879Z,1513249747.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:07.893Z,1513249747.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:08.275Z,1513249748.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:08.296Z,1513249748.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:08.329Z,1513249748.329 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:09:08.329Z,1513249748.329 [BPC1] No Fault, FailCount= 1
2017-12-14T11:09:08.673Z,1513249748.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:08.758Z,1513249748.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:09.104Z,1513249749.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:09.124Z,1513249749.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:09.472Z,1513249749.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:09.499Z,1513249749.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:09.872Z,1513249749.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:09.903Z,1513249749.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:10.266Z,1513249750.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:10.301Z,1513249750.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:10.744Z,1513249750.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:10.781Z,1513249750.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:11.078Z,1513249751.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:11.097Z,1513249751.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:11.481Z,1513249751.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:11.496Z,1513249751.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:11.874Z,1513249751.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:11.889Z,1513249751.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:12.285Z,1513249752.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:12.304Z,1513249752.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:12.742Z,1513249752.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:12.766Z,1513249752.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:13.084Z,1513249753.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:13.105Z,1513249753.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:13.485Z,1513249753.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:13.501Z,1513249753.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:13.859Z,1513249753.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:13.892Z,1513249753.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:13.905Z,1513249753.905 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:09:14.264Z,1513249754.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:14.343Z,1513249754.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:14.685Z,1513249754.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:14.700Z,1513249754.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:15.085Z,1513249755.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:15.100Z,1513249755.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:15.494Z,1513249755.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:15.541Z,1513249755.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:15.871Z,1513249755.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:15.886Z,1513249755.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:16.270Z,1513249756.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:16.357Z,1513249756.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:16.686Z,1513249756.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:16.700Z,1513249756.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:17.086Z,1513249757.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:17.147Z,1513249757.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:17.488Z,1513249757.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:17.503Z,1513249757.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:17.865Z,1513249757.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:17.904Z,1513249757.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:18.268Z,1513249758.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:18.330Z,1513249758.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:18.690Z,1513249758.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:18.728Z,1513249758.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:19.085Z,1513249759.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:19.100Z,1513249759.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:19.482Z,1513249759.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:19.497Z,1513249759.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:19.872Z,1513249759.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:19.895Z,1513249759.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:20.270Z,1513249760.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:20.374Z,1513249760.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:20.680Z,1513249760.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:20.699Z,1513249760.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:21.090Z,1513249761.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:21.111Z,1513249761.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:21.487Z,1513249761.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:21.502Z,1513249761.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:21.861Z,1513249761.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:21.923Z,1513249761.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:22.293Z,1513249762.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:22.315Z,1513249762.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:22.674Z,1513249762.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:22.700Z,1513249762.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:23.083Z,1513249763.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:23.098Z,1513249763.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:23.483Z,1513249763.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:23.506Z,1513249763.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:23.883Z,1513249763.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:23.898Z,1513249763.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:24.276Z,1513249764.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:24.297Z,1513249764.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:24.741Z,1513249764.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:24.772Z,1513249764.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:25.095Z,1513249765.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:25.130Z,1513249765.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:25.484Z,1513249765.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:25.507Z,1513249765.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:25.866Z,1513249765.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:25.895Z,1513249765.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:26.272Z,1513249766.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:26.300Z,1513249766.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:26.746Z,1513249766.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:26.761Z,1513249766.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:27.086Z,1513249767.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:27.104Z,1513249767.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:27.485Z,1513249767.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:27.506Z,1513249767.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:27.865Z,1513249767.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:27.923Z,1513249767.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:28.282Z,1513249768.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:28.399Z,1513249768.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:28.680Z,1513249768.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:28.699Z,1513249768.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:29.078Z,1513249769.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:29.127Z,1513249769.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:29.478Z,1513249769.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:29.492Z,1513249769.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:29.876Z,1513249769.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:29.916Z,1513249769.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:30.271Z,1513249770.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:30.339Z,1513249770.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:30.690Z,1513249770.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:30.705Z,1513249770.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:31.093Z,1513249771.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:31.108Z,1513249771.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:31.482Z,1513249771.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:31.504Z,1513249771.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:31.877Z,1513249771.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:31.908Z,1513249771.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:32.275Z,1513249772.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:32.364Z,1513249772.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:32.682Z,1513249772.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:32.697Z,1513249772.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:33.086Z,1513249773.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:33.105Z,1513249773.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:33.482Z,1513249773.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:33.508Z,1513249773.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:33.861Z,1513249773.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:33.895Z,1513249773.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:34.267Z,1513249774.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:34.338Z,1513249774.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:34.667Z,1513249774.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:34.739Z,1513249774.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:35.086Z,1513249775.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:35.108Z,1513249775.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:35.489Z,1513249775.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:35.510Z,1513249775.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:35.881Z,1513249775.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:35.914Z,1513249775.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:36.255Z,1513249776.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:36.295Z,1513249776.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:36.672Z,1513249776.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:36.687Z,1513249776.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:37.071Z,1513249777.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:37.094Z,1513249777.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:37.472Z,1513249777.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:37.487Z,1513249777.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:37.908Z,1513249777.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:37.967Z,1513249777.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:38.280Z,1513249778.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:38.295Z,1513249778.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:38.748Z,1513249778.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:38.771Z,1513249778.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:39.076Z,1513249779.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:39.091Z,1513249779.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:39.475Z,1513249779.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:39.490Z,1513249779.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:39.876Z,1513249779.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:39.911Z,1513249779.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:40.273Z,1513249780.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:40.288Z,1513249780.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:40.735Z,1513249780.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:40.777Z,1513249780.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:41.101Z,1513249781.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:41.148Z,1513249781.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:41.472Z,1513249781.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:41.497Z,1513249781.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:41.872Z,1513249781.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:41.902Z,1513249781.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:42.261Z,1513249782.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:42.277Z,1513249782.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:42.676Z,1513249782.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:42.700Z,1513249782.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:43.078Z,1513249783.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:43.107Z,1513249783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:43.481Z,1513249783.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:43.496Z,1513249783.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:43.873Z,1513249783.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:43.888Z,1513249783.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:44.327Z,1513249784.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:44.397Z,1513249784.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:44.686Z,1513249784.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:44.703Z,1513249784.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:45.082Z,1513249785.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:45.097Z,1513249785.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:45.485Z,1513249785.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:45.504Z,1513249785.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:45.879Z,1513249785.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:45.895Z,1513249785.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:46.263Z,1513249786.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:46.367Z,1513249786.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:46.687Z,1513249786.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:46.705Z,1513249786.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:47.091Z,1513249787.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:47.111Z,1513249787.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:47.478Z,1513249787.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:47.502Z,1513249787.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:50.970Z,1513249790.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:51.062Z,1513249791.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:51.148Z,1513249791.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:51.168Z,1513249791.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:51.557Z,1513249791.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:51.572Z,1513249791.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:51.970Z,1513249791.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:52.018Z,1513249792.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:52.352Z,1513249792.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:52.375Z,1513249792.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:52.742Z,1513249792.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:52.780Z,1513249792.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:53.150Z,1513249793.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:53.164Z,1513249793.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:53.549Z,1513249793.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:53.564Z,1513249793.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:53.956Z,1513249793.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:53.979Z,1513249793.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:54.359Z,1513249794.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:54.379Z,1513249794.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:54.755Z,1513249794.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:54.771Z,1513249794.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:55.135Z,1513249795.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:55.171Z,1513249795.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:55.538Z,1513249795.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:55.565Z,1513249795.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:55.939Z,1513249795.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:55.967Z,1513249795.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:56.387Z,1513249796.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:56.416Z,1513249796.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:56.766Z,1513249796.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:56.780Z,1513249796.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:57.174Z,1513249797.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:57.204Z,1513249797.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:57.546Z,1513249797.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:57.574Z,1513249797.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:57.942Z,1513249797.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:57.977Z,1513249797.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:58.392Z,1513249798.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:58.426Z,1513249798.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:58.745Z,1513249798.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:58.772Z,1513249798.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:59.146Z,1513249799.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:59.161Z,1513249799.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:59.544Z,1513249799.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:59.559Z,1513249799.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:09:59.958Z,1513249799.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:09:59.987Z,1513249799.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:00.419Z,1513249800.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:00.453Z,1513249800.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:00.762Z,1513249800.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:00.777Z,1513249800.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:01.147Z,1513249801.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:01.205Z,1513249801.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:01.542Z,1513249801.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:01.567Z,1513249801.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:01.950Z,1513249801.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:01.965Z,1513249801.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:02.382Z,1513249802.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:02.419Z,1513249802.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:02.762Z,1513249802.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:02.784Z,1513249802.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:03.155Z,1513249803.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:03.183Z,1513249803.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:03.554Z,1513249803.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:03.623Z,1513249803.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:03.946Z,1513249803.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:03.972Z,1513249803.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:04.330Z,1513249804.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:04.421Z,1513249804.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:04.754Z,1513249804.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:04.769Z,1513249804.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:05.144Z,1513249805.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:05.180Z,1513249805.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:05.546Z,1513249805.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:05.562Z,1513249805.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:05.953Z,1513249805.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:05.973Z,1513249805.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:06.359Z,1513249806.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:06.374Z,1513249806.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:06.767Z,1513249806.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:06.807Z,1513249806.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:07.152Z,1513249807.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:07.167Z,1513249807.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:07.552Z,1513249807.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:07.566Z,1513249807.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:07.944Z,1513249807.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:07.969Z,1513249807.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:08.350Z,1513249808.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:08.364Z,1513249808.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:08.770Z,1513249808.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:08.786Z,1513249808.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:09.152Z,1513249809.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:09.188Z,1513249809.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:09.566Z,1513249809.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:09.581Z,1513249809.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:09.935Z,1513249809.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:10.015Z,1513249810.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:10.385Z,1513249810.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:10.416Z,1513249810.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:10.752Z,1513249810.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:10.785Z,1513249810.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:11.150Z,1513249811.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:11.166Z,1513249811.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:11.548Z,1513249811.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:11.614Z,1513249811.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:11.955Z,1513249811.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:11.972Z,1513249811.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:12.415Z,1513249812.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:12.435Z,1513249812.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:12.750Z,1513249812.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:12.777Z,1513249812.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:13.178Z,1513249813.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:13.267Z,1513249813.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:13.535Z,1513249813.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:13.551Z,1513249813.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:13.941Z,1513249813.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:13.979Z,1513249813.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:14.380Z,1513249814.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:14.439Z,1513249814.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:14.762Z,1513249814.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:14.787Z,1513249814.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:15.150Z,1513249815.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:15.198Z,1513249815.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:15.546Z,1513249815.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:15.560Z,1513249815.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:15.946Z,1513249815.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:15.961Z,1513249815.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:16.416Z,1513249816.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:16.471Z,1513249816.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:16.739Z,1513249816.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:16.755Z,1513249816.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:17.143Z,1513249817.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:17.158Z,1513249817.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:17.543Z,1513249817.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:17.579Z,1513249817.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:17.953Z,1513249817.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:17.984Z,1513249817.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:18.361Z,1513249818.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:18.473Z,1513249818.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:18.751Z,1513249818.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:18.771Z,1513249818.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:19.147Z,1513249819.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:19.163Z,1513249819.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:19.547Z,1513249819.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:19.561Z,1513249819.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:19.940Z,1513249819.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:19.972Z,1513249819.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:20.347Z,1513249820.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:20.361Z,1513249820.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:20.751Z,1513249820.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:20.788Z,1513249820.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:21.154Z,1513249821.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:21.169Z,1513249821.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:21.553Z,1513249821.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:21.568Z,1513249821.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:21.948Z,1513249821.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:21.962Z,1513249821.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:22.340Z,1513249822.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:22.355Z,1513249822.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:22.773Z,1513249822.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:22.825Z,1513249822.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:23.147Z,1513249823.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:23.161Z,1513249823.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:23.540Z,1513249823.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:23.594Z,1513249823.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:23.993Z,1513249823.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:24.008Z,1513249824.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:24.392Z,1513249824.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:24.415Z,1513249824.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:24.758Z,1513249824.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:24.839Z,1513249824.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:25.142Z,1513249825.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:25.160Z,1513249825.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:25.544Z,1513249825.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:25.559Z,1513249825.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:25.958Z,1513249825.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:25.998Z,1513249825.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:26.366Z,1513249826.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:26.381Z,1513249826.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:26.754Z,1513249826.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:26.770Z,1513249826.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:27.160Z,1513249827.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:27.184Z,1513249827.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:27.555Z,1513249827.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:27.575Z,1513249827.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:27.938Z,1513249827.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:27.966Z,1513249827.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:28.387Z,1513249828.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:28.418Z,1513249828.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:28.757Z,1513249828.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:28.772Z,1513249828.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:29.178Z,1513249829.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:29.230Z,1513249829.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:29.539Z,1513249829.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:29.571Z,1513249829.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:29.966Z,1513249829.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:29.987Z,1513249829.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:30.400Z,1513249830.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:30.420Z,1513249830.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:30.758Z,1513249830.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:30.776Z,1513249830.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:31.139Z,1513249831.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:31.175Z,1513249831.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:31.535Z,1513249831.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:31.562Z,1513249831.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:31.935Z,1513249831.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:31.962Z,1513249831.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:32.440Z,1513249832.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:32.491Z,1513249832.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:32.762Z,1513249832.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:32.795Z,1513249832.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:33.155Z,1513249833.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:33.186Z,1513249833.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:33.559Z,1513249833.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:33.587Z,1513249833.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:33.940Z,1513249833.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:33.995Z,1513249833.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:34.348Z,1513249834.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:34.363Z,1513249834.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:34.754Z,1513249834.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:34.786Z,1513249834.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:35.146Z,1513249835.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:35.166Z,1513249835.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:35.547Z,1513249835.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:35.659Z,1513249835.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:35.874Z,1513249835.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:35.955Z,1513249835.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:35.970Z,1513249835.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:36.358Z,1513249836.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:36.406Z,1513249836.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:36.671Z,1513249836.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:36.762Z,1513249836.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:36.781Z,1513249836.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:37.081Z,1513249837.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:37.138Z,1513249837.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:37.187Z,1513249837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:37.539Z,1513249837.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:37.567Z,1513249837.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:37.936Z,1513249837.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:37.974Z,1513249837.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:38.399Z,1513249838.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:38.422Z,1513249838.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:38.754Z,1513249838.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:38.776Z,1513249838.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:39.174Z,1513249839.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:39.195Z,1513249839.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:39.561Z,1513249839.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:39.583Z,1513249839.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:39.938Z,1513249839.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:39.962Z,1513249839.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:40.384Z,1513249840.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:40.428Z,1513249840.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:40.748Z,1513249840.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:40.767Z,1513249840.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:41.142Z,1513249841.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:41.163Z,1513249841.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:41.540Z,1513249841.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:41.567Z,1513249841.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:41.999Z,1513249841.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:42.020Z,1513249842.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:42.403Z,1513249842.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:42.417Z,1513249842.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:42.754Z,1513249842.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:42.769Z,1513249842.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:43.142Z,1513249843.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:43.157Z,1513249843.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:43.548Z,1513249843.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:43.563Z,1513249843.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:43.942Z,1513249843.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:43.965Z,1513249843.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:44.391Z,1513249844.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:44.420Z,1513249844.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:44.759Z,1513249844.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:44.774Z,1513249844.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:45.163Z,1513249845.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:45.194Z,1513249845.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:45.555Z,1513249845.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:45.607Z,1513249845.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:45.950Z,1513249845.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:45.967Z,1513249845.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:46.339Z,1513249846.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:46.466Z,1513249846.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:46.753Z,1513249846.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:46.772Z,1513249846.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:47.147Z,1513249847.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:47.163Z,1513249847.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:47.166Z,1513249847.166 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:10:47.166Z,1513249847.166 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:10:47.166Z,1513249847.166 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:10:47.166Z,1513249847.166 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:10:47.542Z,1513249847.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:47.566Z,1513249847.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:47.573Z,1513249847.573 [Default:CheckIn:D] Stopped
2017-12-14T11:10:47.573Z,1513249847.573 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:10:49.901Z,1513249849.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:50.698Z,1513249850.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.026Z,1513249851.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.056Z,1513249851.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:51.060Z,1513249851.060 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 637.536393 min 
2017-12-14T11:10:51.060Z,1513249851.060 [Default:CheckIn:E] Stopped
2017-12-14T11:10:51.060Z,1513249851.060 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:10:51.061Z,1513249851.061 [Default:CheckIn] Stopped
2017-12-14T11:10:51.061Z,1513249851.061 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:10:51.061Z,1513249851.061 [Default:CheckIn](INFO): Running loop #62
2017-12-14T11:10:51.061Z,1513249851.061 [Default:CheckIn] Running Loop=62
2017-12-14T11:10:51.061Z,1513249851.061 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:10:51.062Z,1513249851.062 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:10:51.101Z,1513249851.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.202Z,1513249851.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.235Z,1513249851.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:51.552Z,1513249851.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.572Z,1513249851.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:51.918Z,1513249851.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:51.939Z,1513249851.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:52.349Z,1513249852.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:52.393Z,1513249852.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:52.709Z,1513249852.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:52.740Z,1513249852.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:53.112Z,1513249853.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:53.143Z,1513249853.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:53.510Z,1513249853.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:53.546Z,1513249853.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:53.922Z,1513249853.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:53.951Z,1513249853.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:54.378Z,1513249854.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:54.412Z,1513249854.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:54.722Z,1513249854.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:54.795Z,1513249854.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:55.113Z,1513249855.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:55.139Z,1513249855.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:55.510Z,1513249855.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:55.541Z,1513249855.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:55.915Z,1513249855.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:55.967Z,1513249855.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:56.368Z,1513249856.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:56.399Z,1513249856.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:56.731Z,1513249856.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:56.759Z,1513249856.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:57.125Z,1513249857.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:57.155Z,1513249857.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:57.529Z,1513249857.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:57.552Z,1513249857.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:57.911Z,1513249857.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:58.018Z,1513249858.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:58.379Z,1513249858.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:58.425Z,1513249858.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:58.721Z,1513249858.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:58.774Z,1513249858.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:59.116Z,1513249859.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:59.131Z,1513249859.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:59.516Z,1513249859.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:59.567Z,1513249859.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:10:59.933Z,1513249859.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:10:59.959Z,1513249859.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:00.317Z,1513249860.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:00.331Z,1513249860.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:00.732Z,1513249860.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:00.763Z,1513249860.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:01.139Z,1513249861.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:01.178Z,1513249861.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:01.506Z,1513249861.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:01.536Z,1513249861.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:01.920Z,1513249861.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:01.935Z,1513249861.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:02.306Z,1513249862.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:02.330Z,1513249862.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:02.741Z,1513249862.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:02.780Z,1513249862.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:03.134Z,1513249863.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:03.149Z,1513249863.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:03.528Z,1513249863.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:03.544Z,1513249863.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:03.907Z,1513249863.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:03.922Z,1513249863.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:04.318Z,1513249864.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:04.362Z,1513249864.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:04.733Z,1513249864.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:04.764Z,1513249864.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:05.122Z,1513249865.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:05.136Z,1513249865.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:05.518Z,1513249865.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:05.540Z,1513249865.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:05.928Z,1513249865.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:05.943Z,1513249865.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:06.352Z,1513249866.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:06.396Z,1513249866.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:06.740Z,1513249866.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:06.756Z,1513249866.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:07.108Z,1513249867.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:07.123Z,1513249867.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:07.565Z,1513249867.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:07.628Z,1513249867.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:07.906Z,1513249867.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:07.921Z,1513249867.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:08.377Z,1513249868.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:08.419Z,1513249868.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:08.725Z,1513249868.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:08.758Z,1513249868.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:09.125Z,1513249869.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:09.149Z,1513249869.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:09.526Z,1513249869.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:09.551Z,1513249869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:09.905Z,1513249869.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:09.960Z,1513249869.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:10.357Z,1513249870.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:10.401Z,1513249870.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:10.736Z,1513249870.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:10.767Z,1513249870.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:11.126Z,1513249871.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:11.140Z,1513249871.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:11.519Z,1513249871.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:11.539Z,1513249871.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:11.926Z,1513249871.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:11.947Z,1513249871.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:12.357Z,1513249872.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:12.384Z,1513249872.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:12.739Z,1513249872.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:12.763Z,1513249872.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:13.111Z,1513249873.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:13.146Z,1513249873.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:13.511Z,1513249873.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:13.550Z,1513249873.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:13.935Z,1513249873.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:13.970Z,1513249873.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:14.333Z,1513249874.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:14.422Z,1513249874.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:14.730Z,1513249874.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:14.750Z,1513249874.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:15.122Z,1513249875.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:15.137Z,1513249875.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:15.522Z,1513249875.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:15.537Z,1513249875.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:15.926Z,1513249875.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:15.968Z,1513249875.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:16.319Z,1513249876.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:16.339Z,1513249876.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:16.734Z,1513249876.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:16.774Z,1513249876.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:17.164Z,1513249877.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:17.184Z,1513249877.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:17.517Z,1513249877.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:17.525Z,1513249877.525 [BPC1](ERROR): Failed to parse message.
2017-12-14T11:11:17.525Z,1513249877.525 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T11:11:17.525Z,1513249877.525 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:11:17.526Z,1513249877.526 [BPC1](ERROR): Data Fault
2017-12-14T11:11:17.534Z,1513249877.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:17.548Z,1513249877.548 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:11:17.910Z,1513249877.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:17.938Z,1513249877.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:17.959Z,1513249877.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:18.335Z,1513249878.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:18.349Z,1513249878.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:18.706Z,1513249878.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:18.740Z,1513249878.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:18.764Z,1513249878.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:18.815Z,1513249878.815 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:11:18.815Z,1513249878.815 [BPC1] No Fault, FailCount= 1
2017-12-14T11:11:19.118Z,1513249879.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:19.123Z,1513249879.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:19.223Z,1513249879.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:19.524Z,1513249879.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:19.551Z,1513249879.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:19.908Z,1513249879.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:19.959Z,1513249879.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:20.430Z,1513249880.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:20.484Z,1513249880.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:20.744Z,1513249880.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:20.788Z,1513249880.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:21.133Z,1513249881.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:21.157Z,1513249881.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:21.520Z,1513249881.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:21.599Z,1513249881.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:21.913Z,1513249881.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:21.953Z,1513249881.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:22.404Z,1513249882.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:22.450Z,1513249882.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:22.728Z,1513249882.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:22.748Z,1513249882.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:23.117Z,1513249883.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:23.138Z,1513249883.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:23.509Z,1513249883.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:23.591Z,1513249883.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:23.928Z,1513249883.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:23.986Z,1513249883.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:24.358Z,1513249884.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:24.422Z,1513249884.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:24.722Z,1513249884.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:24.776Z,1513249884.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:25.119Z,1513249885.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:25.139Z,1513249885.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:25.515Z,1513249885.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:25.529Z,1513249885.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:25.926Z,1513249885.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:25.941Z,1513249885.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:26.366Z,1513249886.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:26.442Z,1513249886.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:26.716Z,1513249886.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:26.783Z,1513249886.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:27.150Z,1513249887.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:27.173Z,1513249887.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:27.547Z,1513249887.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:27.599Z,1513249887.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:27.912Z,1513249887.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:27.967Z,1513249887.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:28.314Z,1513249888.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:28.329Z,1513249888.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:28.706Z,1513249888.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:28.723Z,1513249888.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:29.125Z,1513249889.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:29.140Z,1513249889.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:29.521Z,1513249889.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:29.590Z,1513249889.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:29.935Z,1513249889.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:29.960Z,1513249889.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:30.355Z,1513249890.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:30.388Z,1513249890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:30.753Z,1513249890.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:30.809Z,1513249890.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:31.108Z,1513249891.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:31.143Z,1513249891.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:31.518Z,1513249891.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:31.562Z,1513249891.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:31.917Z,1513249891.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:31.970Z,1513249891.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:32.316Z,1513249892.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:32.362Z,1513249892.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:32.758Z,1513249892.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:32.803Z,1513249892.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:33.124Z,1513249893.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:33.181Z,1513249893.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:33.522Z,1513249893.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:33.579Z,1513249893.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:33.927Z,1513249893.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:33.996Z,1513249893.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:34.330Z,1513249894.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:34.418Z,1513249894.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:34.718Z,1513249894.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:34.761Z,1513249894.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:35.118Z,1513249895.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:35.148Z,1513249895.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:35.517Z,1513249895.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:35.546Z,1513249895.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:35.928Z,1513249895.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:35.979Z,1513249895.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:36.360Z,1513249896.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:36.403Z,1513249896.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:36.722Z,1513249896.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:36.765Z,1513249896.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:37.118Z,1513249897.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:37.175Z,1513249897.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:37.516Z,1513249897.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:37.539Z,1513249897.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:37.924Z,1513249897.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:37.947Z,1513249897.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:38.364Z,1513249898.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:38.457Z,1513249898.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:38.747Z,1513249898.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:38.770Z,1513249898.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:39.147Z,1513249899.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:39.166Z,1513249899.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:39.543Z,1513249899.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:39.639Z,1513249899.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:39.917Z,1513249899.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:39.940Z,1513249899.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:40.338Z,1513249900.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:40.429Z,1513249900.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:40.751Z,1513249900.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:40.779Z,1513249900.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:41.118Z,1513249901.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:41.176Z,1513249901.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:41.521Z,1513249901.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:41.575Z,1513249901.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:41.939Z,1513249901.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:42.010Z,1513249902.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:42.325Z,1513249902.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:42.410Z,1513249902.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:42.720Z,1513249902.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:42.748Z,1513249902.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:43.108Z,1513249903.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:43.165Z,1513249903.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:43.513Z,1513249903.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:43.556Z,1513249903.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:43.917Z,1513249903.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:43.980Z,1513249903.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:44.325Z,1513249904.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:44.368Z,1513249904.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:44.732Z,1513249904.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:44.775Z,1513249904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:45.130Z,1513249905.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:45.179Z,1513249905.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:45.530Z,1513249905.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:45.583Z,1513249905.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:45.918Z,1513249905.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:45.948Z,1513249905.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:46.306Z,1513249906.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:46.332Z,1513249906.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:46.735Z,1513249906.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:46.750Z,1513249906.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:47.117Z,1513249907.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:47.148Z,1513249907.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:47.516Z,1513249907.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:47.539Z,1513249907.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:47.922Z,1513249907.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:47.938Z,1513249907.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:51.489Z,1513249911.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:51.539Z,1513249911.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:51.654Z,1513249911.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:51.694Z,1513249911.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:51.992Z,1513249911.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:52.008Z,1513249912.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:52.403Z,1513249912.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:52.437Z,1513249912.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:52.792Z,1513249912.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:52.819Z,1513249912.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:53.198Z,1513249913.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:53.213Z,1513249913.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:53.596Z,1513249913.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:53.611Z,1513249913.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:54.014Z,1513249914.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:54.028Z,1513249914.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:54.407Z,1513249914.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:54.421Z,1513249914.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:54.802Z,1513249914.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:54.848Z,1513249914.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:55.192Z,1513249915.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:55.225Z,1513249915.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:55.591Z,1513249915.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:55.616Z,1513249915.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:55.987Z,1513249915.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:56.018Z,1513249916.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:56.433Z,1513249916.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:56.470Z,1513249916.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:56.812Z,1513249916.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:56.839Z,1513249916.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:57.208Z,1513249917.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:57.228Z,1513249917.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:57.605Z,1513249917.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:57.620Z,1513249917.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:57.987Z,1513249917.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:58.019Z,1513249918.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:58.384Z,1513249918.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:58.407Z,1513249918.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:58.790Z,1513249918.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:58.823Z,1513249918.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:59.188Z,1513249919.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:59.227Z,1513249919.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:11:59.382Z,1513249919.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:59.633Z,1513249919.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:11:59.669Z,1513249919.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:00.021Z,1513249920.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:00.035Z,1513249920.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:00.177Z,1513249920.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:00.425Z,1513249920.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:00.440Z,1513249920.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:00.810Z,1513249920.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:00.824Z,1513249920.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:01.194Z,1513249921.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:01.222Z,1513249921.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:01.222Z,1513249921.222 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 213
2017-12-14T11:12:01.222Z,1513249921.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:12:01.287Z,1513249921.287 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:01.287Z,1513249921.287 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 213
2017-12-14T11:12:01.287Z,1513249921.287 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:12:01.289Z,1513249921.289 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:01.289Z,1513249921.289 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 213
2017-12-14T11:12:01.289Z,1513249921.289 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:12:01.301Z,1513249921.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:12:01.301Z,1513249921.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:12:01.302Z,1513249921.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:12:01.594Z,1513249921.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:01.634Z,1513249921.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:12:01.634Z,1513249921.634 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 213
2017-12-14T11:12:01.634Z,1513249921.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:12:01.634Z,1513249921.634 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 213
2017-12-14T11:12:01.635Z,1513249921.635 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:12:01.635Z,1513249921.635 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 213
2017-12-14T11:12:01.994Z,1513249921.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:02.021Z,1513249922.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:12:02.022Z,1513249922.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:12:02.022Z,1513249922.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:12:02.022Z,1513249922.022 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:12:02.023Z,1513249922.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:12:02.023Z,1513249922.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:12:02.023Z,1513249922.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:12:02.024Z,1513249922.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:12:02.024Z,1513249922.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:12:02.394Z,1513249922.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:02.425Z,1513249922.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:02.836Z,1513249922.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:02.891Z,1513249922.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:03.206Z,1513249923.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:03.235Z,1513249923.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:03.602Z,1513249923.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:03.676Z,1513249923.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:03.997Z,1513249923.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:04.012Z,1513249924.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:04.398Z,1513249924.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:04.459Z,1513249924.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:04.819Z,1513249924.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:04.844Z,1513249924.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:05.199Z,1513249925.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:05.240Z,1513249925.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:05.596Z,1513249925.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:05.612Z,1513249925.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:06.050Z,1513249926.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:06.073Z,1513249926.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:06.407Z,1513249926.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:06.435Z,1513249926.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:06.802Z,1513249926.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:06.827Z,1513249926.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:07.191Z,1513249927.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:07.218Z,1513249927.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:07.588Z,1513249927.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:07.617Z,1513249927.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:07.992Z,1513249927.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:08.020Z,1513249928.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:08.387Z,1513249928.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:08.425Z,1513249928.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:08.807Z,1513249928.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:08.824Z,1513249928.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:09.255Z,1513249929.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:09.279Z,1513249929.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:09.618Z,1513249929.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:09.640Z,1513249929.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:09.991Z,1513249929.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:10.018Z,1513249930.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:10.428Z,1513249930.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:10.460Z,1513249930.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:10.792Z,1513249930.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:10.808Z,1513249930.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:11.192Z,1513249931.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:11.207Z,1513249931.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:11.598Z,1513249931.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:11.621Z,1513249931.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:12.007Z,1513249932.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:12.022Z,1513249932.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:12.422Z,1513249932.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:12.473Z,1513249932.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:12.798Z,1513249932.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:12.827Z,1513249932.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:13.186Z,1513249933.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:13.204Z,1513249933.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:13.342Z,1513249933.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:13.586Z,1513249933.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:13.638Z,1513249933.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:13.745Z,1513249933.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:13.994Z,1513249933.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:14.021Z,1513249934.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:14.149Z,1513249934.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:14.393Z,1513249934.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:14.407Z,1513249934.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:14.809Z,1513249934.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:14.834Z,1513249934.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:15.221Z,1513249935.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:15.236Z,1513249935.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:15.635Z,1513249935.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:15.691Z,1513249935.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:15.994Z,1513249935.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:16.036Z,1513249936.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:16.397Z,1513249936.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:16.440Z,1513249936.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:16.792Z,1513249936.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:16.806Z,1513249936.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:17.200Z,1513249937.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:17.215Z,1513249937.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:17.588Z,1513249937.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:17.639Z,1513249937.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:17.997Z,1513249937.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:18.012Z,1513249938.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:18.405Z,1513249938.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:18.445Z,1513249938.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:18.817Z,1513249938.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:18.863Z,1513249938.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:19.200Z,1513249939.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:19.215Z,1513249939.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:19.601Z,1513249939.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:19.616Z,1513249939.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:19.999Z,1513249939.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:20.019Z,1513249940.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:20.397Z,1513249940.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:20.432Z,1513249940.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:20.807Z,1513249940.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:20.822Z,1513249940.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:21.210Z,1513249941.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:21.225Z,1513249941.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:21.615Z,1513249941.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:21.629Z,1513249941.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:22.026Z,1513249942.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:22.079Z,1513249942.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:22.421Z,1513249942.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:22.441Z,1513249942.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:22.789Z,1513249942.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:22.818Z,1513249942.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:23.207Z,1513249943.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:23.222Z,1513249943.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:23.588Z,1513249943.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:23.619Z,1513249943.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:24.014Z,1513249944.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:24.029Z,1513249944.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:24.443Z,1513249944.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:24.483Z,1513249944.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:24.807Z,1513249944.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:24.834Z,1513249944.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:25.233Z,1513249945.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:25.256Z,1513249945.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:25.593Z,1513249945.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:25.622Z,1513249945.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:25.628Z,1513249945.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:25.995Z,1513249945.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:26.090Z,1513249946.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:26.394Z,1513249946.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:26.409Z,1513249946.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:26.426Z,1513249946.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:26.809Z,1513249946.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:26.859Z,1513249946.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:27.206Z,1513249947.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:27.241Z,1513249947.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:27.608Z,1513249947.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:27.655Z,1513249947.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:27.998Z,1513249947.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:28.012Z,1513249948.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:28.434Z,1513249948.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:28.461Z,1513249948.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:28.790Z,1513249948.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:28.820Z,1513249948.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:29.202Z,1513249949.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:29.217Z,1513249949.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:29.595Z,1513249949.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:29.615Z,1513249949.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:29.000Z,1513249950.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:30.015Z,1513249950.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:30.404Z,1513249950.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:30.426Z,1513249950.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:30.802Z,1513249950.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:30.816Z,1513249950.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:31.196Z,1513249951.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:31.211Z,1513249951.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:31.618Z,1513249951.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:31.657Z,1513249951.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:31.993Z,1513249951.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:32.016Z,1513249952.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:32.396Z,1513249952.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:32.419Z,1513249952.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:32.806Z,1513249952.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:32.821Z,1513249952.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:33.210Z,1513249953.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:33.224Z,1513249953.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:33.609Z,1513249953.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:33.623Z,1513249953.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:33.999Z,1513249953.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:34.026Z,1513249954.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:34.396Z,1513249954.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:34.424Z,1513249954.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:34.819Z,1513249954.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:34.880Z,1513249954.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:35.187Z,1513249955.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:35.207Z,1513249955.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:35.595Z,1513249955.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:35.635Z,1513249955.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:36.005Z,1513249956.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:36.048Z,1513249956.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:36.411Z,1513249956.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:36.436Z,1513249956.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:36.810Z,1513249956.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:36.836Z,1513249956.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:37.197Z,1513249957.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:37.212Z,1513249957.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:37.598Z,1513249957.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:37.612Z,1513249957.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:38.005Z,1513249958.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:38.041Z,1513249958.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:38.428Z,1513249958.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:38.458Z,1513249958.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:38.805Z,1513249958.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:38.831Z,1513249958.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:39.210Z,1513249959.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:39.226Z,1513249959.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:39.597Z,1513249959.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:39.623Z,1513249959.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:40.011Z,1513249960.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:40.031Z,1513249960.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:40.392Z,1513249960.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:40.415Z,1513249960.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:40.797Z,1513249960.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:40.812Z,1513249960.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:41.237Z,1513249961.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:41.260Z,1513249961.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:41.595Z,1513249961.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:41.609Z,1513249961.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:41.882Z,1513249961.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:42.002Z,1513249962.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:42.016Z,1513249962.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:42.402Z,1513249962.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:42.424Z,1513249962.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:42.679Z,1513249962.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:42.818Z,1513249962.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:42.847Z,1513249962.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:43.097Z,1513249963.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:43.203Z,1513249963.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:43.218Z,1513249963.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:43.595Z,1513249963.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:43.623Z,1513249963.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:44.002Z,1513249964.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:44.018Z,1513249964.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:44.409Z,1513249964.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:44.466Z,1513249964.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:44.807Z,1513249964.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:44.826Z,1513249964.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:45.212Z,1513249965.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:45.227Z,1513249965.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:45.612Z,1513249965.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:45.631Z,1513249965.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:46.000Z,1513249966.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:46.017Z,1513249966.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:46.397Z,1513249966.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:46.427Z,1513249966.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:46.814Z,1513249966.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:46.869Z,1513249966.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:47.200Z,1513249967.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:47.216Z,1513249967.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:47.620Z,1513249967.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:47.664Z,1513249967.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:48.009Z,1513249968.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:48.106Z,1513249968.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:51.429Z,1513249971.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:51.444Z,1513249971.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:51.566Z,1513249971.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:51.581Z,1513249971.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:51.882Z,1513249971.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:52.005Z,1513249972.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:52.051Z,1513249972.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:52.389Z,1513249972.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:52.436Z,1513249972.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:52.677Z,1513249972.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:52.731Z,1513249972.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:52.795Z,1513249972.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:53.081Z,1513249973.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:53.141Z,1513249973.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:53.164Z,1513249973.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:53.534Z,1513249973.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:53.563Z,1513249973.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:53.877Z,1513249973.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:53.941Z,1513249973.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:53.976Z,1513249973.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:54.354Z,1513249974.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:54.375Z,1513249974.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:54.675Z,1513249974.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:54.752Z,1513249974.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:54.786Z,1513249974.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:55.081Z,1513249975.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:55.143Z,1513249975.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:55.159Z,1513249975.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:55.540Z,1513249975.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:55.555Z,1513249975.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:55.877Z,1513249975.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:55.942Z,1513249975.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:55.958Z,1513249975.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:56.327Z,1513249976.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:56.355Z,1513249976.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:56.675Z,1513249976.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:56.751Z,1513249976.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:56.778Z,1513249976.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:57.089Z,1513249977.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:57.180Z,1513249977.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:57.243Z,1513249977.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:57.550Z,1513249977.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:57.571Z,1513249977.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:57.885Z,1513249977.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:57.942Z,1513249977.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:57.957Z,1513249977.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:58.387Z,1513249978.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:58.423Z,1513249978.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:58.681Z,1513249978.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:58.748Z,1513249978.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:58.762Z,1513249978.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:59.085Z,1513249979.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:59.149Z,1513249979.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:59.167Z,1513249979.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:59.542Z,1513249979.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:59.557Z,1513249979.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:12:59.881Z,1513249979.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:59.947Z,1513249979.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:12:59.970Z,1513249979.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:00.439Z,1513249980.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:00.499Z,1513249980.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:00.677Z,1513249980.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:00.747Z,1513249980.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:00.770Z,1513249980.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:01.081Z,1513249981.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:01.141Z,1513249981.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:01.203Z,1513249981.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:01.532Z,1513249981.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:01.558Z,1513249981.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:01.877Z,1513249981.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:01.947Z,1513249981.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:01.961Z,1513249981.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:02.386Z,1513249982.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:02.426Z,1513249982.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:02.673Z,1513249982.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:02.767Z,1513249982.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:02.782Z,1513249982.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:03.077Z,1513249983.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:03.158Z,1513249983.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:03.173Z,1513249983.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:03.546Z,1513249983.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:03.579Z,1513249983.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:03.873Z,1513249983.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:03.936Z,1513249983.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:03.968Z,1513249983.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:04.386Z,1513249984.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:04.408Z,1513249984.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:04.669Z,1513249984.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:04.743Z,1513249984.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:04.763Z,1513249984.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:05.073Z,1513249985.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:05.144Z,1513249985.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:05.160Z,1513249985.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:05.537Z,1513249985.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:05.564Z,1513249985.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:05.869Z,1513249985.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:05.950Z,1513249985.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:05.971Z,1513249985.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:06.368Z,1513249986.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:06.452Z,1513249986.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:06.665Z,1513249986.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:06.771Z,1513249986.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:06.799Z,1513249986.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:07.069Z,1513249987.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:07.131Z,1513249987.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:07.156Z,1513249987.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:07.538Z,1513249987.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:07.558Z,1513249987.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:07.865Z,1513249987.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:07.950Z,1513249987.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:07.965Z,1513249987.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:08.340Z,1513249988.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:08.357Z,1513249988.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:08.663Z,1513249988.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:08.749Z,1513249988.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:08.783Z,1513249988.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:09.085Z,1513249989.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:09.151Z,1513249989.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:09.166Z,1513249989.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:09.546Z,1513249989.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:09.562Z,1513249989.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:09.884Z,1513249989.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:09.945Z,1513249989.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:09.981Z,1513249989.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:10.331Z,1513249990.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:10.346Z,1513249990.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:10.683Z,1513249990.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:10.760Z,1513249990.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:10.787Z,1513249990.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:11.097Z,1513249991.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:11.140Z,1513249991.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:11.172Z,1513249991.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:11.540Z,1513249991.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:11.555Z,1513249991.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:11.893Z,1513249991.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:11.950Z,1513249991.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:11.983Z,1513249991.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:12.392Z,1513249992.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:12.433Z,1513249992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:12.689Z,1513249992.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:12.742Z,1513249992.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:12.792Z,1513249992.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:13.093Z,1513249993.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:13.187Z,1513249993.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:13.260Z,1513249993.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:13.552Z,1513249993.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:13.567Z,1513249993.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:13.889Z,1513249993.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:13.963Z,1513249993.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:14.047Z,1513249994.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:14.371Z,1513249994.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:14.399Z,1513249994.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:14.685Z,1513249994.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:14.752Z,1513249994.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:14.803Z,1513249994.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:15.092Z,1513249995.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:15.158Z,1513249995.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:15.173Z,1513249995.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:15.557Z,1513249995.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:15.572Z,1513249995.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:15.885Z,1513249995.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:15.930Z,1513249995.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:15.969Z,1513249995.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:16.410Z,1513249996.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:16.462Z,1513249996.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:16.682Z,1513249996.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:16.752Z,1513249996.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:16.781Z,1513249996.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:17.085Z,1513249997.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:17.140Z,1513249997.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:17.167Z,1513249997.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:17.542Z,1513249997.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:17.558Z,1513249997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:17.881Z,1513249997.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:17.947Z,1513249997.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:17.963Z,1513249997.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:18.397Z,1513249998.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:18.411Z,1513249998.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:18.677Z,1513249998.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:18.762Z,1513249998.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:18.791Z,1513249998.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:19.081Z,1513249999.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:19.137Z,1513249999.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:19.160Z,1513249999.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:19.541Z,1513249999.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:19.556Z,1513249999.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:19.877Z,1513249999.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:19.948Z,1513249999.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:19.963Z,1513249999.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:20.355Z,1513250000.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:20.426Z,1513250000.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:20.673Z,1513250000.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:20.751Z,1513250000.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:20.772Z,1513250000.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:21.077Z,1513250001.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:21.159Z,1513250001.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:21.175Z,1513250001.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:21.555Z,1513250001.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:21.575Z,1513250001.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:21.873Z,1513250001.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:21.934Z,1513250001.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:21.963Z,1513250001.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:22.329Z,1513250002.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:22.359Z,1513250002.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:22.671Z,1513250002.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:22.794Z,1513250002.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:22.867Z,1513250002.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:23.081Z,1513250003.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:23.142Z,1513250003.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:23.176Z,1513250003.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:23.538Z,1513250003.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:23.573Z,1513250003.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:23.878Z,1513250003.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:23.950Z,1513250003.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:23.974Z,1513250003.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:24.350Z,1513250004.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:24.374Z,1513250004.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:24.675Z,1513250004.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:24.772Z,1513250004.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:24.797Z,1513250004.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:25.085Z,1513250005.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:25.136Z,1513250005.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:25.151Z,1513250005.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:25.535Z,1513250005.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:25.551Z,1513250005.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:25.881Z,1513250005.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:25.938Z,1513250005.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:25.993Z,1513250005.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:26.379Z,1513250006.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:26.403Z,1513250006.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:26.677Z,1513250006.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:26.752Z,1513250006.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:26.771Z,1513250006.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:27.081Z,1513250007.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:27.152Z,1513250007.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:27.167Z,1513250007.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:27.551Z,1513250007.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:27.566Z,1513250007.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:27.880Z,1513250007.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:27.939Z,1513250007.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:27.955Z,1513250007.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:28.390Z,1513250008.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:28.416Z,1513250008.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:28.674Z,1513250008.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:28.734Z,1513250008.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:28.761Z,1513250008.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:29.077Z,1513250009.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:29.155Z,1513250009.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:29.175Z,1513250009.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:29.530Z,1513250009.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:29.568Z,1513250009.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:29.873Z,1513250009.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:29.958Z,1513250009.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:29.986Z,1513250009.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:30.391Z,1513250010.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:30.416Z,1513250010.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:30.669Z,1513250010.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:30.758Z,1513250010.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:30.773Z,1513250010.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:31.073Z,1513250011.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:31.135Z,1513250011.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:31.167Z,1513250011.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:31.534Z,1513250011.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:31.549Z,1513250011.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:31.869Z,1513250011.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:31.939Z,1513250011.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:31.962Z,1513250011.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:32.400Z,1513250012.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:32.452Z,1513250012.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:32.666Z,1513250012.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:32.744Z,1513250012.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:32.780Z,1513250012.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:33.069Z,1513250013.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:33.149Z,1513250013.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:33.172Z,1513250013.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:33.550Z,1513250013.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:33.571Z,1513250013.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:33.865Z,1513250013.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:33.943Z,1513250013.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:33.958Z,1513250013.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:34.382Z,1513250014.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:34.433Z,1513250014.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:34.663Z,1513250014.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:34.741Z,1513250014.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:34.795Z,1513250014.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:35.069Z,1513250015.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:35.142Z,1513250015.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:35.202Z,1513250015.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:35.539Z,1513250015.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:35.554Z,1513250015.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:35.865Z,1513250015.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:35.949Z,1513250015.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:35.994Z,1513250015.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:36.349Z,1513250016.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:36.363Z,1513250016.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:36.663Z,1513250016.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:36.743Z,1513250016.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:36.795Z,1513250016.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:37.073Z,1513250017.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:37.138Z,1513250017.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:37.154Z,1513250017.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:37.539Z,1513250017.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:37.555Z,1513250017.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:37.869Z,1513250017.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:37.938Z,1513250017.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:37.953Z,1513250017.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:38.336Z,1513250018.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:38.351Z,1513250018.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:38.667Z,1513250018.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:38.766Z,1513250018.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:38.787Z,1513250018.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:39.077Z,1513250019.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:39.146Z,1513250019.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:39.160Z,1513250019.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:39.554Z,1513250019.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:39.585Z,1513250019.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:39.876Z,1513250019.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:39.943Z,1513250019.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:39.959Z,1513250019.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:40.389Z,1513250020.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:40.411Z,1513250020.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:40.669Z,1513250020.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:40.738Z,1513250020.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:40.753Z,1513250020.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:41.073Z,1513250021.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:41.135Z,1513250021.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:41.166Z,1513250021.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:41.542Z,1513250021.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:41.557Z,1513250021.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:41.869Z,1513250021.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:41.962Z,1513250021.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:41.996Z,1513250021.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:42.386Z,1513250022.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:42.413Z,1513250022.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:42.667Z,1513250022.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:42.746Z,1513250022.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:42.777Z,1513250022.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:43.073Z,1513250023.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:43.134Z,1513250023.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:43.167Z,1513250023.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:43.546Z,1513250023.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:43.565Z,1513250023.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:43.869Z,1513250023.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:43.932Z,1513250023.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:43.959Z,1513250023.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:44.386Z,1513250024.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:44.413Z,1513250024.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:44.665Z,1513250024.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:44.750Z,1513250024.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:44.764Z,1513250024.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:45.069Z,1513250025.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:45.163Z,1513250025.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:45.206Z,1513250025.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:45.551Z,1513250025.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:45.566Z,1513250025.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:45.866Z,1513250025.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:45.947Z,1513250025.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:45.967Z,1513250025.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:46.381Z,1513250026.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:46.418Z,1513250026.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:46.661Z,1513250026.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:46.731Z,1513250026.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:46.766Z,1513250026.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:47.065Z,1513250027.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:47.131Z,1513250027.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:47.159Z,1513250027.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:47.534Z,1513250027.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:47.560Z,1513250027.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:47.861Z,1513250027.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:47.951Z,1513250027.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:47.966Z,1513250027.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:48.452Z,1513250028.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:48.493Z,1513250028.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:48.657Z,1513250028.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:49.063Z,1513250029.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:49.857Z,1513250029.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:50.656Z,1513250030.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:51.077Z,1513250031.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:51.663Z,1513250031.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:51.703Z,1513250031.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:51.806Z,1513250031.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:51.858Z,1513250031.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:51.874Z,1513250031.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:52.178Z,1513250032.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:52.209Z,1513250032.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:52.583Z,1513250032.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:52.615Z,1513250032.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:52.671Z,1513250032.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:52.989Z,1513250032.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:53.015Z,1513250033.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:53.101Z,1513250033.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:53.382Z,1513250033.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:53.419Z,1513250033.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:53.789Z,1513250033.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:53.823Z,1513250033.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:53.899Z,1513250033.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:54.194Z,1513250034.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:54.216Z,1513250034.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:54.585Z,1513250034.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:54.607Z,1513250034.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:54.694Z,1513250034.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:54.982Z,1513250034.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:55.010Z,1513250035.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:55.097Z,1513250035.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:55.378Z,1513250035.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:55.401Z,1513250035.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:55.774Z,1513250035.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:55.807Z,1513250035.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:55.893Z,1513250035.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:56.175Z,1513250036.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:56.203Z,1513250036.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:56.575Z,1513250036.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:56.599Z,1513250036.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:56.690Z,1513250036.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:56.994Z,1513250036.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:57.009Z,1513250037.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:57.093Z,1513250037.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:57.399Z,1513250037.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:57.472Z,1513250037.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:57.790Z,1513250037.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:57.826Z,1513250037.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:57.889Z,1513250037.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:58.193Z,1513250038.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:58.262Z,1513250038.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:58.586Z,1513250038.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:58.600Z,1513250038.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:58.685Z,1513250038.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:58.986Z,1513250038.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:59.032Z,1513250039.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:59.089Z,1513250039.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:59.382Z,1513250039.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:59.396Z,1513250039.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:59.793Z,1513250039.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:13:59.816Z,1513250039.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:13:59.885Z,1513250039.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:00.198Z,1513250040.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:00.228Z,1513250040.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:00.587Z,1513250040.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:00.607Z,1513250040.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:00.681Z,1513250040.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:00.983Z,1513250040.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:00.998Z,1513250040.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:01.085Z,1513250041.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:01.383Z,1513250041.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:01.398Z,1513250041.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:01.783Z,1513250041.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:01.803Z,1513250041.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:01.881Z,1513250041.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:02.183Z,1513250042.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:02.198Z,1513250042.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:02.594Z,1513250042.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:02.609Z,1513250042.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:02.678Z,1513250042.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:02.991Z,1513250042.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:03.011Z,1513250043.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:03.081Z,1513250043.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:03.392Z,1513250043.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:03.408Z,1513250043.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:03.792Z,1513250043.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:03.811Z,1513250043.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:03.877Z,1513250043.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:04.183Z,1513250044.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:04.198Z,1513250044.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:04.596Z,1513250044.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:04.615Z,1513250044.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:04.675Z,1513250044.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:04.981Z,1513250044.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:05.023Z,1513250045.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:05.098Z,1513250045.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:05.379Z,1513250045.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:05.394Z,1513250045.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:05.781Z,1513250045.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:05.796Z,1513250045.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:05.893Z,1513250045.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:06.200Z,1513250046.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:06.224Z,1513250046.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:06.592Z,1513250046.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:06.626Z,1513250046.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:06.690Z,1513250046.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:06.984Z,1513250046.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:06.999Z,1513250046.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:07.097Z,1513250047.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:07.387Z,1513250047.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:07.435Z,1513250047.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:07.782Z,1513250047.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:07.797Z,1513250047.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:07.894Z,1513250047.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:08.184Z,1513250048.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:08.203Z,1513250048.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:08.583Z,1513250048.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:08.603Z,1513250048.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:08.733Z,1513250048.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:08.988Z,1513250048.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:09.015Z,1513250049.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:09.137Z,1513250049.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:09.393Z,1513250049.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:09.408Z,1513250049.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:09.792Z,1513250049.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:09.807Z,1513250049.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:09.933Z,1513250049.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:10.185Z,1513250050.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:10.201Z,1513250050.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:10.582Z,1513250050.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:10.597Z,1513250050.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:10.729Z,1513250050.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:10.993Z,1513250050.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:11.038Z,1513250051.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:11.133Z,1513250051.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:11.374Z,1513250051.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:11.411Z,1513250051.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:11.791Z,1513250051.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:11.806Z,1513250051.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:11.929Z,1513250051.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:12.198Z,1513250052.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:12.212Z,1513250052.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:12.592Z,1513250052.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:12.616Z,1513250052.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:12.728Z,1513250052.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:12.987Z,1513250052.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:13.003Z,1513250053.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:13.375Z,1513250053.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:13.406Z,1513250053.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:13.522Z,1513250053.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:13.774Z,1513250053.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:13.800Z,1513250053.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:14.207Z,1513250054.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:14.251Z,1513250054.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:14.327Z,1513250054.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:14.585Z,1513250054.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:14.600Z,1513250054.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:14.759Z,1513250054.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:14.988Z,1513250054.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:15.004Z,1513250055.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:15.389Z,1513250055.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:15.404Z,1513250055.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:15.553Z,1513250055.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:15.790Z,1513250055.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:15.804Z,1513250055.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:16.183Z,1513250056.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:16.198Z,1513250056.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:16.351Z,1513250056.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:16.585Z,1513250056.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:16.600Z,1513250056.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:16.801Z,1513250056.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:16.991Z,1513250056.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:17.011Z,1513250057.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:17.383Z,1513250057.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:17.399Z,1513250057.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:17.597Z,1513250057.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:17.794Z,1513250057.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:17.816Z,1513250057.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:18.198Z,1513250058.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:18.213Z,1513250058.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:18.393Z,1513250058.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:18.599Z,1513250058.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:18.614Z,1513250058.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:18.980Z,1513250058.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:19.007Z,1513250059.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:19.105Z,1513250059.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:19.380Z,1513250059.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:19.451Z,1513250059.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:19.784Z,1513250059.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:19.800Z,1513250059.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:19.902Z,1513250059.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:20.180Z,1513250060.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:20.219Z,1513250060.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:20.613Z,1513250060.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:20.698Z,1513250060.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:20.706Z,1513250060.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:20.996Z,1513250060.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:21.039Z,1513250061.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:21.101Z,1513250061.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:21.402Z,1513250061.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:21.417Z,1513250061.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:21.798Z,1513250061.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:21.819Z,1513250061.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:21.897Z,1513250061.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:22.175Z,1513250062.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:22.200Z,1513250062.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:22.214Z,1513250062.214 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T11:14:22.214Z,1513250062.214 [DropWeight] No Fault, FailCount= 1
2017-12-14T11:14:22.575Z,1513250062.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:22.612Z,1513250062.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:22.693Z,1513250062.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:22.977Z,1513250062.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:22.000Z,1513250063.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:23.097Z,1513250063.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:23.376Z,1513250063.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:23.391Z,1513250063.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:23.791Z,1513250063.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:23.824Z,1513250063.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:23.895Z,1513250063.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:24.197Z,1513250064.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:24.226Z,1513250064.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:24.605Z,1513250064.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:24.639Z,1513250064.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:24.689Z,1513250064.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:24.984Z,1513250064.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:24.000Z,1513250065.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:25.093Z,1513250065.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:25.380Z,1513250065.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:25.403Z,1513250065.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:25.783Z,1513250065.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:25.799Z,1513250065.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:25.889Z,1513250065.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:26.179Z,1513250066.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:26.201Z,1513250066.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:26.583Z,1513250066.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:26.597Z,1513250066.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:26.685Z,1513250066.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:27.011Z,1513250067.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:27.058Z,1513250067.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:27.089Z,1513250067.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:27.399Z,1513250067.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:27.415Z,1513250067.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:27.802Z,1513250067.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:27.820Z,1513250067.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:27.885Z,1513250067.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:28.180Z,1513250068.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:28.205Z,1513250068.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:28.575Z,1513250068.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:28.603Z,1513250068.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:28.683Z,1513250068.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:28.975Z,1513250068.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:29.012Z,1513250069.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:29.085Z,1513250069.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:29.375Z,1513250069.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:29.416Z,1513250069.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:29.803Z,1513250069.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:29.818Z,1513250069.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:29.882Z,1513250069.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:30.212Z,1513250070.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:30.265Z,1513250070.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:30.585Z,1513250070.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:30.607Z,1513250070.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:30.678Z,1513250070.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:30.983Z,1513250070.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:30.999Z,1513250070.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:31.081Z,1513250071.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:31.382Z,1513250071.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:31.397Z,1513250071.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:31.783Z,1513250071.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:31.803Z,1513250071.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:31.877Z,1513250071.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:32.185Z,1513250072.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:32.199Z,1513250072.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:32.578Z,1513250072.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:32.605Z,1513250072.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:32.675Z,1513250072.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:32.987Z,1513250072.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:33.021Z,1513250073.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:33.097Z,1513250073.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:33.404Z,1513250073.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:33.419Z,1513250073.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:33.786Z,1513250073.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:33.800Z,1513250073.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:33.893Z,1513250073.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:34.179Z,1513250074.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:34.193Z,1513250074.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:34.579Z,1513250074.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:34.594Z,1513250074.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:34.691Z,1513250074.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:34.978Z,1513250074.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:35.007Z,1513250075.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:35.097Z,1513250075.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:35.387Z,1513250075.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:35.401Z,1513250075.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:35.789Z,1513250075.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:35.805Z,1513250075.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:35.893Z,1513250075.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:36.192Z,1513250076.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:36.211Z,1513250076.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:36.597Z,1513250076.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:36.652Z,1513250076.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:36.690Z,1513250076.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:36.985Z,1513250076.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:37.007Z,1513250077.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:37.093Z,1513250077.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:37.380Z,1513250077.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:37.403Z,1513250077.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:37.782Z,1513250077.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:37.802Z,1513250077.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:37.889Z,1513250077.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:38.184Z,1513250078.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:38.200Z,1513250078.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:38.584Z,1513250078.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:38.603Z,1513250078.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:38.685Z,1513250078.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:38.992Z,1513250078.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:39.016Z,1513250079.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:39.089Z,1513250079.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:39.402Z,1513250079.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:39.417Z,1513250079.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:39.817Z,1513250079.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:39.854Z,1513250079.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:39.886Z,1513250079.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:40.175Z,1513250080.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:40.207Z,1513250080.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:40.575Z,1513250080.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:40.607Z,1513250080.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:40.681Z,1513250080.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:40.978Z,1513250080.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:41.032Z,1513250081.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:41.085Z,1513250081.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:41.375Z,1513250081.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:41.427Z,1513250081.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:41.781Z,1513250081.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:41.796Z,1513250081.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:41.881Z,1513250081.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:42.198Z,1513250082.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:42.268Z,1513250082.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:42.585Z,1513250082.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:42.607Z,1513250082.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:42.677Z,1513250082.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:42.984Z,1513250082.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:43.042Z,1513250083.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:43.081Z,1513250083.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:43.384Z,1513250083.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:43.399Z,1513250083.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:43.784Z,1513250083.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:43.799Z,1513250083.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:43.877Z,1513250083.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:44.182Z,1513250084.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:44.202Z,1513250084.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:44.583Z,1513250084.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:44.603Z,1513250084.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:44.673Z,1513250084.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:44.990Z,1513250084.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:45.004Z,1513250085.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:45.077Z,1513250085.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:45.390Z,1513250085.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:45.404Z,1513250085.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:45.790Z,1513250085.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:45.804Z,1513250085.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:45.873Z,1513250085.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:46.209Z,1513250086.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:46.247Z,1513250086.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:46.575Z,1513250086.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:46.608Z,1513250086.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:46.671Z,1513250086.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:47.007Z,1513250087.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:47.040Z,1513250087.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:47.129Z,1513250087.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:47.382Z,1513250087.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:47.405Z,1513250087.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:47.790Z,1513250087.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:47.805Z,1513250087.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:47.925Z,1513250087.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:48.193Z,1513250088.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:48.208Z,1513250088.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:48.595Z,1513250088.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:48.615Z,1513250088.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:48.722Z,1513250088.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:49.125Z,1513250089.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:49.921Z,1513250089.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:50.717Z,1513250090.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:51.121Z,1513250091.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:51.917Z,1513250091.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:52.112Z,1513250092.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:52.163Z,1513250092.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:52.269Z,1513250092.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:52.284Z,1513250092.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:52.624Z,1513250092.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:52.663Z,1513250092.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:52.714Z,1513250092.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:53.029Z,1513250093.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:53.076Z,1513250093.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:53.117Z,1513250093.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:53.426Z,1513250093.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:53.447Z,1513250093.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:53.823Z,1513250093.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:53.839Z,1513250093.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:53.913Z,1513250093.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:54.225Z,1513250094.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:54.247Z,1513250094.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:54.639Z,1513250094.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:54.673Z,1513250094.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:54.709Z,1513250094.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:55.034Z,1513250095.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:55.057Z,1513250095.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:55.114Z,1513250095.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:55.435Z,1513250095.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:55.459Z,1513250095.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:55.848Z,1513250095.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:55.879Z,1513250095.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:55.909Z,1513250095.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:56.218Z,1513250096.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:56.255Z,1513250096.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:56.623Z,1513250096.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:56.642Z,1513250096.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:56.705Z,1513250096.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:57.028Z,1513250097.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:57.067Z,1513250097.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:57.109Z,1513250097.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:57.423Z,1513250097.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:57.444Z,1513250097.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:57.827Z,1513250097.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:57.842Z,1513250097.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:57.905Z,1513250097.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:58.230Z,1513250098.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:58.248Z,1513250098.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:58.630Z,1513250098.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:58.650Z,1513250098.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:58.702Z,1513250098.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:59.067Z,1513250099.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:59.095Z,1513250099.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:59.105Z,1513250099.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:59.428Z,1513250099.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:59.478Z,1513250099.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:59.819Z,1513250099.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:14:59.837Z,1513250099.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:14:59.901Z,1513250099.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:00.228Z,1513250100.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:00.251Z,1513250100.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:00.633Z,1513250100.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:00.697Z,1513250100.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:00.734Z,1513250100.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:01.034Z,1513250101.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:01.076Z,1513250101.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:01.105Z,1513250101.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:01.432Z,1513250101.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:01.462Z,1513250101.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:01.843Z,1513250101.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:01.861Z,1513250101.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:01.901Z,1513250101.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:02.241Z,1513250102.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:02.293Z,1513250102.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:02.293Z,1513250102.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 214
2017-12-14T11:15:02.293Z,1513250102.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:15:02.295Z,1513250102.295 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:02.295Z,1513250102.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 214
2017-12-14T11:15:02.295Z,1513250102.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:15:02.297Z,1513250102.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:02.297Z,1513250102.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 214
2017-12-14T11:15:02.298Z,1513250102.298 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:15:02.350Z,1513250102.350 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:15:02.351Z,1513250102.351 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:15:02.351Z,1513250102.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:15:02.611Z,1513250102.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:02.698Z,1513250102.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:02.738Z,1513250102.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:15:02.738Z,1513250102.738 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 214
2017-12-14T11:15:02.739Z,1513250102.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:15:02.739Z,1513250102.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 214
2017-12-14T11:15:02.739Z,1513250102.739 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:15:02.739Z,1513250102.739 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 214
2017-12-14T11:15:03.019Z,1513250103.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:03.045Z,1513250103.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:15:03.046Z,1513250103.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:15:03.046Z,1513250103.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:15:03.046Z,1513250103.046 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:15:03.047Z,1513250103.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:15:03.048Z,1513250103.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:15:03.050Z,1513250103.050 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:15:03.051Z,1513250103.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:15:03.052Z,1513250103.052 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:15:03.102Z,1513250103.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:03.419Z,1513250103.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:03.434Z,1513250103.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:03.827Z,1513250103.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:03.872Z,1513250103.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:03.897Z,1513250103.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:04.228Z,1513250104.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:04.279Z,1513250104.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:04.630Z,1513250104.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:04.664Z,1513250104.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:04.693Z,1513250104.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:05.012Z,1513250105.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:05.046Z,1513250105.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:05.097Z,1513250105.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:05.411Z,1513250105.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:05.488Z,1513250105.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:05.822Z,1513250105.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:05.873Z,1513250105.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:05.921Z,1513250105.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:06.218Z,1513250106.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:06.234Z,1513250106.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:06.611Z,1513250106.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:06.687Z,1513250106.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:06.722Z,1513250106.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:07.028Z,1513250107.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:07.057Z,1513250107.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:07.125Z,1513250107.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:07.434Z,1513250107.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:07.483Z,1513250107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:07.831Z,1513250107.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:07.847Z,1513250107.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:07.921Z,1513250107.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:08.215Z,1513250108.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:08.249Z,1513250108.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:08.631Z,1513250108.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:08.684Z,1513250108.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:08.718Z,1513250108.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:09.020Z,1513250109.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:09.071Z,1513250109.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:09.121Z,1513250109.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:09.415Z,1513250109.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:09.431Z,1513250109.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:09.830Z,1513250109.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:09.861Z,1513250109.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:09.917Z,1513250109.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:10.233Z,1513250110.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:10.251Z,1513250110.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:10.622Z,1513250110.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:10.671Z,1513250110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:10.713Z,1513250110.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:11.011Z,1513250111.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:11.042Z,1513250111.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:11.118Z,1513250111.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:11.417Z,1513250111.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:11.458Z,1513250111.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:11.819Z,1513250111.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:11.855Z,1513250111.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:11.913Z,1513250111.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:12.221Z,1513250112.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:12.244Z,1513250112.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:12.612Z,1513250112.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:12.658Z,1513250112.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:12.709Z,1513250112.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:13.023Z,1513250113.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:13.040Z,1513250113.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:13.113Z,1513250113.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:13.425Z,1513250113.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:13.461Z,1513250113.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:13.826Z,1513250113.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:13.873Z,1513250113.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:13.910Z,1513250113.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:14.219Z,1513250114.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:14.234Z,1513250114.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:14.622Z,1513250114.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:14.705Z,1513250114.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:14.734Z,1513250114.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:15.028Z,1513250115.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:15.050Z,1513250115.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:15.114Z,1513250115.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:15.431Z,1513250115.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:15.476Z,1513250115.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:15.830Z,1513250115.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:15.846Z,1513250115.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:15.911Z,1513250115.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:16.229Z,1513250116.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:16.252Z,1513250116.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:16.624Z,1513250116.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:16.705Z,1513250116.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:16.719Z,1513250116.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:17.015Z,1513250117.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:17.044Z,1513250117.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:17.109Z,1513250117.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:17.412Z,1513250117.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:17.439Z,1513250117.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:17.816Z,1513250117.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:17.859Z,1513250117.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:17.905Z,1513250117.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:18.212Z,1513250118.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:18.266Z,1513250118.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:18.621Z,1513250118.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:18.655Z,1513250118.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:18.701Z,1513250118.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:19.038Z,1513250119.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:19.062Z,1513250119.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:19.105Z,1513250119.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:19.425Z,1513250119.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:19.460Z,1513250119.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:19.812Z,1513250119.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:19.862Z,1513250119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:19.901Z,1513250119.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:20.216Z,1513250120.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:20.270Z,1513250120.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:20.620Z,1513250120.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:20.636Z,1513250120.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:20.697Z,1513250120.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:21.027Z,1513250121.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:21.067Z,1513250121.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:21.101Z,1513250121.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:21.425Z,1513250121.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:21.447Z,1513250121.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:21.835Z,1513250121.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:21.884Z,1513250121.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:21.897Z,1513250121.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:22.235Z,1513250122.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:22.264Z,1513250122.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:22.617Z,1513250122.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:22.632Z,1513250122.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:22.693Z,1513250122.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:23.016Z,1513250123.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:23.055Z,1513250123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:23.097Z,1513250123.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:23.419Z,1513250123.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:23.440Z,1513250123.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:23.819Z,1513250123.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:23.839Z,1513250123.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:23.893Z,1513250123.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:24.221Z,1513250124.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:24.236Z,1513250124.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:24.690Z,1513250124.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:24.692Z,1513250124.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:24.707Z,1513250124.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:25.033Z,1513250125.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:25.071Z,1513250125.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:25.093Z,1513250125.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:25.438Z,1513250125.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:25.463Z,1513250125.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:25.811Z,1513250125.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:25.851Z,1513250125.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:25.889Z,1513250125.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:26.212Z,1513250126.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:26.250Z,1513250126.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:26.613Z,1513250126.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:26.678Z,1513250126.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:26.685Z,1513250126.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:27.011Z,1513250127.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:27.067Z,1513250127.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:27.089Z,1513250127.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:27.425Z,1513250127.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:27.460Z,1513250127.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:27.855Z,1513250127.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:27.880Z,1513250127.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:27.886Z,1513250127.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:28.238Z,1513250128.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:28.306Z,1513250128.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:28.618Z,1513250128.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:28.683Z,1513250128.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:28.715Z,1513250128.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:29.026Z,1513250129.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:29.082Z,1513250129.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:29.101Z,1513250129.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:29.419Z,1513250129.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:29.443Z,1513250129.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:29.819Z,1513250129.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:29.838Z,1513250129.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:29.897Z,1513250129.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:30.220Z,1513250130.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:30.235Z,1513250130.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:30.641Z,1513250130.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:30.694Z,1513250130.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:30.740Z,1513250130.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:31.075Z,1513250131.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:31.104Z,1513250131.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:31.105Z,1513250131.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:31.436Z,1513250131.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:31.482Z,1513250131.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:31.811Z,1513250131.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:31.848Z,1513250131.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:31.901Z,1513250131.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:32.212Z,1513250132.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:32.257Z,1513250132.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:32.616Z,1513250132.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:32.658Z,1513250132.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:32.697Z,1513250132.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:33.022Z,1513250133.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:33.037Z,1513250133.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:33.101Z,1513250133.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:33.435Z,1513250133.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:33.472Z,1513250133.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:33.829Z,1513250133.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:33.870Z,1513250133.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:33.897Z,1513250133.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:34.241Z,1513250134.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:34.277Z,1513250134.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:34.611Z,1513250134.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:34.639Z,1513250134.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:34.693Z,1513250134.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:35.011Z,1513250135.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:35.042Z,1513250135.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:35.097Z,1513250135.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:35.415Z,1513250135.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:35.461Z,1513250135.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:35.812Z,1513250135.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:35.851Z,1513250135.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:35.894Z,1513250135.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:36.212Z,1513250136.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:36.227Z,1513250136.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:36.632Z,1513250136.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:36.650Z,1513250136.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:36.690Z,1513250136.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:37.034Z,1513250137.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:37.058Z,1513250137.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:37.093Z,1513250137.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:37.440Z,1513250137.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:37.543Z,1513250137.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:37.811Z,1513250137.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:37.843Z,1513250137.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:37.909Z,1513250137.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:38.212Z,1513250138.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:38.240Z,1513250138.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:38.613Z,1513250138.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:38.656Z,1513250138.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:38.706Z,1513250138.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:39.011Z,1513250139.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:39.040Z,1513250139.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:39.109Z,1513250139.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:39.422Z,1513250139.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:39.468Z,1513250139.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:39.839Z,1513250139.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:39.862Z,1513250139.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:39.905Z,1513250139.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:40.222Z,1513250140.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:40.260Z,1513250140.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:40.619Z,1513250140.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:40.687Z,1513250140.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:40.702Z,1513250140.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:41.020Z,1513250141.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:41.036Z,1513250141.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:41.105Z,1513250141.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:41.415Z,1513250141.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:41.439Z,1513250141.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:41.822Z,1513250141.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:41.838Z,1513250141.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:41.901Z,1513250141.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:42.226Z,1513250142.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:42.312Z,1513250142.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:42.626Z,1513250142.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:42.697Z,1513250142.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:42.720Z,1513250142.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:43.033Z,1513250143.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:43.062Z,1513250143.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:43.109Z,1513250143.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:43.438Z,1513250143.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:43.460Z,1513250143.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:43.847Z,1513250143.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:43.896Z,1513250143.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:43.906Z,1513250143.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:44.219Z,1513250144.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:44.256Z,1513250144.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:44.618Z,1513250144.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:44.696Z,1513250144.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:44.702Z,1513250144.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:45.029Z,1513250145.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:45.052Z,1513250145.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:45.105Z,1513250145.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:45.441Z,1513250145.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:45.455Z,1513250145.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:45.835Z,1513250145.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:45.883Z,1513250145.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:45.902Z,1513250145.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:46.234Z,1513250146.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:46.258Z,1513250146.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:46.617Z,1513250146.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:46.632Z,1513250146.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:46.697Z,1513250146.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:47.039Z,1513250147.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:47.068Z,1513250147.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:47.101Z,1513250147.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:47.421Z,1513250147.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:47.471Z,1513250147.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:47.821Z,1513250147.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:47.836Z,1513250147.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:47.897Z,1513250147.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:48.220Z,1513250148.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:48.236Z,1513250148.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:48.638Z,1513250148.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:48.656Z,1513250148.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:48.694Z,1513250148.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:49.097Z,1513250149.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:49.893Z,1513250149.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:50.690Z,1513250150.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:51.093Z,1513250151.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:51.889Z,1513250151.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:52.041Z,1513250152.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:52.129Z,1513250152.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:52.132Z,1513250152.132 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:10:51.1Z
2017-12-14T11:15:52.132Z,1513250152.132 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:15:52.132Z,1513250152.132 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:15:52.248Z,1513250152.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:52.286Z,1513250152.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:52.686Z,1513250152.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:53.089Z,1513250153.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:53.162Z,1513250153.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:53.200Z,1513250153.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:53.300Z,1513250153.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:53.332Z,1513250153.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:53.661Z,1513250153.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:53.707Z,1513250153.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:53.885Z,1513250153.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:54.059Z,1513250154.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:54.080Z,1513250154.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:54.681Z,1513250154.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:55.085Z,1513250155.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:55.881Z,1513250155.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:56.679Z,1513250156.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.101Z,1513250157.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.475Z,1513250157.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.490Z,1513250157.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:57.577Z,1513250157.577 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0248.lzma
2017-12-14T11:15:57.611Z,1513250157.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.659Z,1513250157.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:57.897Z,1513250157.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.958Z,1513250157.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:57.992Z,1513250157.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:58.327Z,1513250158.327 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0248.lzma.bak
2017-12-14T11:15:58.328Z,1513250158.328 [DataOverHttps](INFO): SBD MOMSN=5438624
2017-12-14T11:15:58.353Z,1513250158.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:58.393Z,1513250158.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:58.694Z,1513250158.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:59.097Z,1513250159.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:59.527Z,1513250159.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:59.552Z,1513250159.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:59.653Z,1513250159.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:15:59.696Z,1513250159.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:15:59.894Z,1513250159.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:00.689Z,1513250160.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:01.093Z,1513250161.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:01.889Z,1513250161.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:02.685Z,1513250162.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:03.050Z,1513250163.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:03.089Z,1513250163.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:03.108Z,1513250163.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:03.223Z,1513250163.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:03.259Z,1513250163.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:03.610Z,1513250163.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:03.631Z,1513250163.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:03.888Z,1513250163.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:04.020Z,1513250164.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:04.070Z,1513250164.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:04.393Z,1513250164.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:04.408Z,1513250164.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:04.681Z,1513250164.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:04.797Z,1513250164.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:04.813Z,1513250164.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:05.477Z,1513250165.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:05.881Z,1513250165.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:06.677Z,1513250166.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:07.081Z,1513250167.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:07.877Z,1513250167.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:08.241Z,1513250168.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:08.281Z,1513250168.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:08.377Z,1513250168.377 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0249.lzma
2017-12-14T11:16:08.439Z,1513250168.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:08.476Z,1513250168.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:08.676Z,1513250168.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:08.748Z,1513250168.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:08.768Z,1513250168.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:09.081Z,1513250169.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:09.108Z,1513250169.108 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0249.lzma.bak
2017-12-14T11:16:09.108Z,1513250169.108 [DataOverHttps](INFO): SBD MOMSN=5438626
2017-12-14T11:16:09.155Z,1513250169.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:09.191Z,1513250169.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:09.878Z,1513250169.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:10.391Z,1513250170.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:10.406Z,1513250170.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:10.410Z,1513250170.410 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:16:10.410Z,1513250170.410 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:16:10.410Z,1513250170.410 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:16:10.526Z,1513250170.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:10.559Z,1513250170.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:10.675Z,1513250170.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:11.088Z,1513250171.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:11.881Z,1513250171.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:12.679Z,1513250172.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:13.097Z,1513250173.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:13.893Z,1513250173.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:13.902Z,1513250173.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:13.917Z,1513250173.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:14.026Z,1513250174.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:14.059Z,1513250174.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:14.402Z,1513250174.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:14.423Z,1513250174.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:14.689Z,1513250174.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:14.800Z,1513250174.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:14.819Z,1513250174.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:15.093Z,1513250175.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:15.175Z,1513250175.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:15.255Z,1513250175.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:15.572Z,1513250175.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:15.587Z,1513250175.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:15.889Z,1513250175.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:15.980Z,1513250175.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:16.063Z,1513250176.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:16.414Z,1513250176.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:16.435Z,1513250176.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:16.685Z,1513250176.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:16.786Z,1513250176.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:16.839Z,1513250176.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:17.089Z,1513250177.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:17.182Z,1513250177.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:17.213Z,1513250177.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:17.563Z,1513250177.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:17.584Z,1513250177.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:17.885Z,1513250177.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:17.989Z,1513250177.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:18.038Z,1513250178.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:18.402Z,1513250178.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:18.462Z,1513250178.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:18.682Z,1513250178.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:18.784Z,1513250178.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:18.819Z,1513250178.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:19.086Z,1513250179.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:19.236Z,1513250179.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:19.280Z,1513250179.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:19.580Z,1513250179.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:19.596Z,1513250179.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:19.882Z,1513250179.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:19.974Z,1513250179.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:19.999Z,1513250179.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:20.375Z,1513250180.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:20.436Z,1513250180.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:20.678Z,1513250180.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:20.793Z,1513250180.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:20.816Z,1513250180.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:21.082Z,1513250181.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:21.166Z,1513250181.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:21.199Z,1513250181.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:21.591Z,1513250181.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:21.650Z,1513250181.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:21.878Z,1513250181.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:22.001Z,1513250182.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:22.048Z,1513250182.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:22.444Z,1513250182.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:22.504Z,1513250182.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:22.674Z,1513250182.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:22.780Z,1513250182.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:22.807Z,1513250182.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:23.077Z,1513250183.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:23.205Z,1513250183.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:23.257Z,1513250183.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:23.567Z,1513250183.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:23.598Z,1513250183.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:23.877Z,1513250183.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:23.997Z,1513250183.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:24.059Z,1513250184.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:24.390Z,1513250184.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:24.417Z,1513250184.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:24.675Z,1513250184.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:24.808Z,1513250184.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:24.832Z,1513250184.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:25.106Z,1513250185.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:25.207Z,1513250185.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:25.273Z,1513250185.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:25.582Z,1513250185.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:25.610Z,1513250185.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:25.901Z,1513250185.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:25.974Z,1513250185.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:26.046Z,1513250186.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:26.371Z,1513250186.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:26.411Z,1513250186.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:26.698Z,1513250186.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:26.806Z,1513250186.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:26.837Z,1513250186.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:27.101Z,1513250187.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:27.175Z,1513250187.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:27.190Z,1513250187.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:27.596Z,1513250187.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:27.611Z,1513250187.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:27.897Z,1513250187.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:28.006Z,1513250188.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:28.034Z,1513250188.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:28.422Z,1513250188.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:28.477Z,1513250188.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:28.693Z,1513250188.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:28.795Z,1513250188.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:28.830Z,1513250188.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:29.097Z,1513250189.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:29.223Z,1513250189.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:29.250Z,1513250189.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:29.568Z,1513250189.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:29.616Z,1513250189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:29.895Z,1513250189.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:29.980Z,1513250189.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:30.007Z,1513250190.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:30.387Z,1513250190.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:30.472Z,1513250190.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:30.690Z,1513250190.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:30.816Z,1513250190.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:30.852Z,1513250190.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:31.094Z,1513250191.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:31.202Z,1513250191.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:31.266Z,1513250191.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:31.591Z,1513250191.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:31.607Z,1513250191.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:31.889Z,1513250191.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:31.964Z,1513250191.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:31.988Z,1513250191.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:32.427Z,1513250192.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:32.500Z,1513250192.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:32.687Z,1513250192.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:32.778Z,1513250192.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:32.815Z,1513250192.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:33.089Z,1513250193.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:33.178Z,1513250193.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:33.225Z,1513250193.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:33.603Z,1513250193.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:33.675Z,1513250193.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:33.886Z,1513250193.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:33.977Z,1513250193.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:33.992Z,1513250193.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:34.388Z,1513250194.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:34.478Z,1513250194.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:34.683Z,1513250194.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:34.789Z,1513250194.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:34.818Z,1513250194.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:35.085Z,1513250195.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:35.176Z,1513250195.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:35.212Z,1513250195.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:35.570Z,1513250195.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:35.612Z,1513250195.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:35.882Z,1513250195.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:35.978Z,1513250195.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:36.020Z,1513250196.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:36.440Z,1513250196.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:36.496Z,1513250196.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:36.678Z,1513250196.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:36.807Z,1513250196.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:36.879Z,1513250196.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:37.082Z,1513250197.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:37.200Z,1513250197.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:37.231Z,1513250197.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:37.581Z,1513250197.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:37.600Z,1513250197.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:37.877Z,1513250197.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:37.974Z,1513250197.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:38.039Z,1513250198.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:38.377Z,1513250198.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:38.399Z,1513250198.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:38.674Z,1513250198.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:38.784Z,1513250198.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:38.840Z,1513250198.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:39.102Z,1513250199.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:39.166Z,1513250199.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:39.235Z,1513250199.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:39.590Z,1513250199.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:39.643Z,1513250199.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:39.898Z,1513250199.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:39.989Z,1513250199.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:40.042Z,1513250200.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:40.388Z,1513250200.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:40.413Z,1513250200.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:40.695Z,1513250200.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:40.799Z,1513250200.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:40.848Z,1513250200.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:41.101Z,1513250201.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:41.165Z,1513250201.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:41.203Z,1513250201.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:41.566Z,1513250201.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:41.605Z,1513250201.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:41.898Z,1513250201.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:41.970Z,1513250201.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:42.015Z,1513250202.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:42.428Z,1513250202.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:42.475Z,1513250202.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:42.693Z,1513250202.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:42.792Z,1513250202.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:42.828Z,1513250202.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:43.098Z,1513250203.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:43.199Z,1513250203.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:43.227Z,1513250203.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:43.584Z,1513250203.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:43.658Z,1513250203.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:43.894Z,1513250203.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:43.967Z,1513250203.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:43.986Z,1513250203.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:44.384Z,1513250204.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:44.412Z,1513250204.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:44.690Z,1513250204.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:44.807Z,1513250204.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:44.883Z,1513250204.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:45.094Z,1513250205.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:45.164Z,1513250205.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:45.194Z,1513250205.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:45.591Z,1513250205.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:45.611Z,1513250205.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:45.891Z,1513250205.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:45.985Z,1513250205.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:46.007Z,1513250206.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:46.411Z,1513250206.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:46.431Z,1513250206.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:46.685Z,1513250206.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:46.767Z,1513250206.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:46.782Z,1513250206.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:47.089Z,1513250207.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:47.170Z,1513250207.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:47.215Z,1513250207.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:47.568Z,1513250207.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:47.591Z,1513250207.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:47.885Z,1513250207.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:47.970Z,1513250207.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:47.984Z,1513250207.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:48.382Z,1513250208.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:48.413Z,1513250208.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:48.681Z,1513250208.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:48.789Z,1513250208.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:48.824Z,1513250208.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:49.085Z,1513250209.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:49.194Z,1513250209.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:49.224Z,1513250209.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:49.577Z,1513250209.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:49.599Z,1513250209.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:49.881Z,1513250209.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:49.975Z,1513250209.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:49.995Z,1513250209.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:50.439Z,1513250210.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:50.464Z,1513250210.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:50.677Z,1513250210.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:50.766Z,1513250210.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:50.801Z,1513250210.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:51.081Z,1513250211.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:51.165Z,1513250211.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:51.196Z,1513250211.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:51.589Z,1513250211.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:51.603Z,1513250211.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:51.879Z,1513250211.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:52.014Z,1513250212.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:52.066Z,1513250212.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:52.386Z,1513250212.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:52.401Z,1513250212.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:52.675Z,1513250212.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:52.768Z,1513250212.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:52.798Z,1513250212.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:53.089Z,1513250213.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:53.163Z,1513250213.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:53.179Z,1513250213.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:53.571Z,1513250213.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:53.607Z,1513250213.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:53.887Z,1513250213.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:53.972Z,1513250213.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:54.003Z,1513250214.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:54.375Z,1513250214.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:54.405Z,1513250214.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:54.683Z,1513250214.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:54.786Z,1513250214.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:54.801Z,1513250214.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:55.093Z,1513250215.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:55.229Z,1513250215.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:55.255Z,1513250215.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:55.585Z,1513250215.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:55.601Z,1513250215.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:55.889Z,1513250215.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:55.971Z,1513250215.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:55.991Z,1513250215.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:56.397Z,1513250216.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:56.435Z,1513250216.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:56.685Z,1513250216.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:56.768Z,1513250216.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:56.791Z,1513250216.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:57.089Z,1513250217.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:57.189Z,1513250217.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:57.208Z,1513250217.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:57.586Z,1513250217.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:57.601Z,1513250217.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:57.886Z,1513250217.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:57.985Z,1513250217.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:58.007Z,1513250218.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:58.411Z,1513250218.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:58.495Z,1513250218.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:58.681Z,1513250218.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:58.785Z,1513250218.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:58.843Z,1513250218.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:59.085Z,1513250219.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:59.163Z,1513250219.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:59.202Z,1513250219.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:59.565Z,1513250219.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:59.604Z,1513250219.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:16:59.885Z,1513250219.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:16:59.964Z,1513250219.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:00.023Z,1513250220.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:00.402Z,1513250220.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:00.416Z,1513250220.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:00.684Z,1513250220.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:00.778Z,1513250220.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:00.844Z,1513250220.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:01.089Z,1513250221.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:01.177Z,1513250221.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:01.207Z,1513250221.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:01.577Z,1513250221.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:01.628Z,1513250221.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:01.886Z,1513250221.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:01.980Z,1513250221.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:02.005Z,1513250222.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:02.387Z,1513250222.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:02.406Z,1513250222.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:02.681Z,1513250222.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:02.764Z,1513250222.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:02.799Z,1513250222.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:03.086Z,1513250223.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:03.223Z,1513250223.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:03.246Z,1513250223.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:03.583Z,1513250223.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:03.603Z,1513250223.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:03.881Z,1513250223.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:03.984Z,1513250223.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:03.999Z,1513250223.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:04.438Z,1513250224.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:04.461Z,1513250224.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:04.677Z,1513250224.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:04.786Z,1513250224.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:04.821Z,1513250224.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:05.081Z,1513250225.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:05.176Z,1513250225.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:05.191Z,1513250225.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:05.564Z,1513250225.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:05.590Z,1513250225.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:05.877Z,1513250225.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:05.964Z,1513250225.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:05.992Z,1513250225.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:06.364Z,1513250226.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:06.392Z,1513250226.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:06.674Z,1513250226.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:06.794Z,1513250226.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:06.809Z,1513250226.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:07.093Z,1513250227.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:07.187Z,1513250227.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:07.207Z,1513250227.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:07.587Z,1513250227.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:07.602Z,1513250227.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:07.889Z,1513250227.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:08.016Z,1513250228.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:08.040Z,1513250228.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:08.374Z,1513250228.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:08.389Z,1513250228.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:08.689Z,1513250228.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:08.778Z,1513250228.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:08.793Z,1513250228.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:09.097Z,1513250229.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:09.170Z,1513250229.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:09.225Z,1513250229.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:09.577Z,1513250229.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:09.593Z,1513250229.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:09.893Z,1513250229.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:09.977Z,1513250229.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:09.992Z,1513250229.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:10.400Z,1513250230.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:10.427Z,1513250230.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:10.689Z,1513250230.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:10.769Z,1513250230.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:10.792Z,1513250230.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:11.093Z,1513250231.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:11.226Z,1513250231.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:11.279Z,1513250231.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:11.889Z,1513250231.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:12.685Z,1513250232.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:13.089Z,1513250233.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:13.885Z,1513250233.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:14.681Z,1513250234.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:14.769Z,1513250234.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:14.784Z,1513250234.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:14.887Z,1513250234.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:14.927Z,1513250234.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:15.085Z,1513250235.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:15.289Z,1513250235.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:15.304Z,1513250235.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:15.720Z,1513250235.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:15.736Z,1513250235.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:15.881Z,1513250235.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:16.085Z,1513250236.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:16.099Z,1513250236.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:16.487Z,1513250236.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:16.501Z,1513250236.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:16.677Z,1513250236.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:16.874Z,1513250236.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:16.907Z,1513250236.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:17.081Z,1513250237.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:17.290Z,1513250237.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:17.311Z,1513250237.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:17.690Z,1513250237.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:17.711Z,1513250237.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:17.877Z,1513250237.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:18.090Z,1513250238.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:18.111Z,1513250238.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:18.482Z,1513250238.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:18.503Z,1513250238.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:18.673Z,1513250238.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:18.875Z,1513250238.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:18.907Z,1513250238.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:19.077Z,1513250239.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:19.311Z,1513250239.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:19.341Z,1513250239.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:19.692Z,1513250239.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:19.708Z,1513250239.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:19.873Z,1513250239.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:20.094Z,1513250240.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:20.161Z,1513250240.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:20.490Z,1513250240.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:20.505Z,1513250240.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:20.671Z,1513250240.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:20.893Z,1513250240.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:20.963Z,1513250240.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:21.109Z,1513250241.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:21.296Z,1513250241.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:21.311Z,1513250241.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:21.693Z,1513250241.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:21.754Z,1513250241.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:21.905Z,1513250241.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:22.089Z,1513250242.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:22.111Z,1513250242.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:22.476Z,1513250242.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:22.528Z,1513250242.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:22.702Z,1513250242.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:22.872Z,1513250242.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:22.899Z,1513250242.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:23.105Z,1513250243.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:23.286Z,1513250243.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:23.312Z,1513250243.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:23.706Z,1513250243.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:23.721Z,1513250243.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:23.902Z,1513250243.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:24.091Z,1513250244.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:24.107Z,1513250244.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:24.472Z,1513250244.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:24.506Z,1513250244.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:24.697Z,1513250244.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:24.872Z,1513250244.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:24.907Z,1513250244.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:25.101Z,1513250245.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:25.296Z,1513250245.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:25.311Z,1513250245.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:25.693Z,1513250245.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:25.720Z,1513250245.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:25.897Z,1513250245.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:26.083Z,1513250246.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:26.107Z,1513250246.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:26.479Z,1513250246.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:26.510Z,1513250246.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:26.705Z,1513250246.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:26.877Z,1513250246.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:26.918Z,1513250246.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:27.109Z,1513250247.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:27.290Z,1513250247.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:27.324Z,1513250247.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:27.691Z,1513250247.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:27.723Z,1513250247.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:27.905Z,1513250247.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:28.080Z,1513250248.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:28.096Z,1513250248.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:28.479Z,1513250248.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:28.494Z,1513250248.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:28.701Z,1513250248.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:28.880Z,1513250248.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:28.907Z,1513250248.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:29.105Z,1513250249.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:29.301Z,1513250249.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:29.331Z,1513250249.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:29.685Z,1513250249.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:29.700Z,1513250249.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:29.901Z,1513250249.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:30.098Z,1513250250.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:30.126Z,1513250250.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:30.480Z,1513250250.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:30.499Z,1513250250.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:30.697Z,1513250250.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:30.879Z,1513250250.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:30.955Z,1513250250.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:31.101Z,1513250251.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:31.289Z,1513250251.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:31.304Z,1513250251.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:31.690Z,1513250251.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:31.711Z,1513250251.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:31.897Z,1513250251.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:32.089Z,1513250252.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:32.104Z,1513250252.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:32.481Z,1513250252.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:32.496Z,1513250252.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:32.694Z,1513250252.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:32.876Z,1513250252.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:32.899Z,1513250252.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:33.097Z,1513250253.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:33.317Z,1513250253.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:33.386Z,1513250253.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:33.693Z,1513250253.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:33.709Z,1513250253.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:33.893Z,1513250253.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:34.086Z,1513250254.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:34.116Z,1513250254.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:34.473Z,1513250254.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:34.507Z,1513250254.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:34.691Z,1513250254.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:34.892Z,1513250254.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:34.911Z,1513250254.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:35.097Z,1513250255.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:35.292Z,1513250255.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:35.307Z,1513250255.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:35.694Z,1513250255.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:35.709Z,1513250255.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:35.893Z,1513250255.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:36.094Z,1513250256.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:36.109Z,1513250256.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:36.471Z,1513250256.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:36.566Z,1513250256.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:36.690Z,1513250256.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:36.871Z,1513250256.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:36.913Z,1513250256.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:37.101Z,1513250257.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:37.274Z,1513250257.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:37.305Z,1513250257.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:37.681Z,1513250257.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:37.715Z,1513250257.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:37.898Z,1513250257.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:38.075Z,1513250258.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:38.090Z,1513250258.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:38.490Z,1513250258.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:38.514Z,1513250258.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:38.693Z,1513250258.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:38.894Z,1513250258.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:38.918Z,1513250258.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:39.097Z,1513250259.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:39.289Z,1513250259.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:39.319Z,1513250259.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:39.676Z,1513250259.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:39.691Z,1513250259.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:39.894Z,1513250259.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:40.079Z,1513250260.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:40.095Z,1513250260.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:40.479Z,1513250260.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:40.499Z,1513250260.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:40.689Z,1513250260.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:40.874Z,1513250260.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:40.897Z,1513250260.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:41.093Z,1513250261.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:41.286Z,1513250261.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:41.350Z,1513250261.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:41.689Z,1513250261.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:41.704Z,1513250261.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:41.889Z,1513250261.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:42.088Z,1513250262.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:42.104Z,1513250262.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:42.479Z,1513250262.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:42.499Z,1513250262.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:42.685Z,1513250262.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:42.889Z,1513250262.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:42.984Z,1513250262.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:43.089Z,1513250263.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:43.280Z,1513250263.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:43.299Z,1513250263.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:43.688Z,1513250263.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:43.742Z,1513250263.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:43.886Z,1513250263.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:44.082Z,1513250264.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:44.096Z,1513250264.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:44.488Z,1513250264.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:44.539Z,1513250264.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:44.681Z,1513250264.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:44.888Z,1513250264.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:44.907Z,1513250264.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:45.085Z,1513250265.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:45.284Z,1513250265.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:45.303Z,1513250265.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:45.672Z,1513250265.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:45.695Z,1513250265.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:45.881Z,1513250265.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:46.073Z,1513250266.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:46.108Z,1513250266.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:46.473Z,1513250266.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:46.508Z,1513250266.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:46.681Z,1513250266.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:46.875Z,1513250266.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:46.909Z,1513250266.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:47.085Z,1513250267.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:47.290Z,1513250267.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:47.306Z,1513250267.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:47.694Z,1513250267.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:47.708Z,1513250267.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:47.881Z,1513250267.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:48.086Z,1513250268.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:48.117Z,1513250268.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:48.477Z,1513250268.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:48.508Z,1513250268.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:48.682Z,1513250268.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:48.873Z,1513250268.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:48.909Z,1513250268.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:49.093Z,1513250269.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:49.283Z,1513250269.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:49.351Z,1513250269.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:49.693Z,1513250269.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:49.727Z,1513250269.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:49.889Z,1513250269.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:50.090Z,1513250270.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:50.115Z,1513250270.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:50.484Z,1513250270.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:50.515Z,1513250270.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:50.687Z,1513250270.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:50.879Z,1513250270.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:50.899Z,1513250270.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:51.093Z,1513250271.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:51.313Z,1513250271.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:51.328Z,1513250271.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:51.689Z,1513250271.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:51.724Z,1513250271.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:51.889Z,1513250271.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:52.089Z,1513250272.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:52.104Z,1513250272.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:52.505Z,1513250272.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:52.560Z,1513250272.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:52.689Z,1513250272.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:52.891Z,1513250272.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:52.910Z,1513250272.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:53.093Z,1513250273.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:53.276Z,1513250273.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:53.303Z,1513250273.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:53.672Z,1513250273.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:53.699Z,1513250273.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:53.889Z,1513250273.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:54.071Z,1513250274.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:54.097Z,1513250274.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:54.492Z,1513250274.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:54.507Z,1513250274.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:54.685Z,1513250274.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:54.894Z,1513250274.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:54.919Z,1513250274.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:55.089Z,1513250275.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:55.286Z,1513250275.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:55.356Z,1513250275.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:55.713Z,1513250275.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:55.757Z,1513250275.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:55.886Z,1513250275.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:56.071Z,1513250276.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:56.111Z,1513250276.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:56.472Z,1513250276.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:56.503Z,1513250276.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:56.683Z,1513250276.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:56.871Z,1513250276.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:56.902Z,1513250276.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:57.089Z,1513250277.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:57.299Z,1513250277.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:57.314Z,1513250277.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:57.696Z,1513250277.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:57.711Z,1513250277.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:57.885Z,1513250277.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:58.091Z,1513250278.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:58.110Z,1513250278.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:58.471Z,1513250278.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:58.508Z,1513250278.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:58.683Z,1513250278.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:58.894Z,1513250278.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:58.918Z,1513250278.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:59.085Z,1513250279.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:59.295Z,1513250279.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:59.310Z,1513250279.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:59.700Z,1513250279.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:17:59.719Z,1513250279.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:17:59.881Z,1513250279.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:00.095Z,1513250280.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:00.110Z,1513250280.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:00.472Z,1513250280.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:00.504Z,1513250280.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:00.677Z,1513250280.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:00.872Z,1513250280.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:00.919Z,1513250280.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:01.081Z,1513250281.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:01.278Z,1513250281.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:01.310Z,1513250281.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:01.679Z,1513250281.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:01.702Z,1513250281.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:01.877Z,1513250281.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:02.096Z,1513250282.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:02.139Z,1513250282.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:02.482Z,1513250282.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:02.514Z,1513250282.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:02.675Z,1513250282.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:02.891Z,1513250282.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:02.914Z,1513250282.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:03.085Z,1513250283.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:03.292Z,1513250283.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:03.335Z,1513250283.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:03.335Z,1513250283.335 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 215
2017-12-14T11:18:03.335Z,1513250283.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:18:03.337Z,1513250283.337 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:03.337Z,1513250283.337 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 215
2017-12-14T11:18:03.337Z,1513250283.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:18:03.339Z,1513250283.339 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:03.339Z,1513250283.339 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 215
2017-12-14T11:18:03.339Z,1513250283.339 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:18:03.376Z,1513250283.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:18:03.376Z,1513250283.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:18:03.376Z,1513250283.376 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:18:03.684Z,1513250283.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:03.731Z,1513250283.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:18:03.731Z,1513250283.731 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 215
2017-12-14T11:18:03.731Z,1513250283.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:18:03.731Z,1513250283.731 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 215
2017-12-14T11:18:03.732Z,1513250283.732 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:18:03.732Z,1513250283.732 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 215
2017-12-14T11:18:03.881Z,1513250283.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:04.081Z,1513250284.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:04.094Z,1513250284.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:18:04.095Z,1513250284.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:18:04.095Z,1513250284.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:18:04.096Z,1513250284.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:18:04.096Z,1513250284.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:18:04.096Z,1513250284.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:18:04.097Z,1513250284.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:18:04.097Z,1513250284.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:18:04.098Z,1513250284.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:18:04.486Z,1513250284.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:04.500Z,1513250284.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:04.679Z,1513250284.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:04.880Z,1513250284.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:04.942Z,1513250284.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:05.085Z,1513250285.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:05.304Z,1513250285.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:05.338Z,1513250285.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:05.693Z,1513250285.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:05.743Z,1513250285.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:05.881Z,1513250285.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:06.094Z,1513250286.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:06.108Z,1513250286.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:06.484Z,1513250286.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:06.543Z,1513250286.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:06.677Z,1513250286.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:06.872Z,1513250286.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:06.906Z,1513250286.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:07.081Z,1513250287.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:07.271Z,1513250287.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:07.307Z,1513250287.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:07.684Z,1513250287.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:07.704Z,1513250287.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:07.878Z,1513250287.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:08.115Z,1513250288.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:08.186Z,1513250288.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:08.513Z,1513250288.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:08.543Z,1513250288.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:08.674Z,1513250288.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:08.898Z,1513250288.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:08.919Z,1513250288.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:09.077Z,1513250289.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:09.296Z,1513250289.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:09.311Z,1513250289.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:09.683Z,1513250289.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:09.704Z,1513250289.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:09.875Z,1513250289.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:10.071Z,1513250290.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:10.102Z,1513250290.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:10.471Z,1513250290.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:10.507Z,1513250290.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:10.670Z,1513250290.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:10.884Z,1513250290.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:10.903Z,1513250290.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:11.073Z,1513250291.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:11.292Z,1513250291.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:11.315Z,1513250291.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:11.869Z,1513250291.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:12.665Z,1513250292.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:13.069Z,1513250293.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:13.865Z,1513250293.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:14.663Z,1513250294.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:14.866Z,1513250294.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:14.915Z,1513250294.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:15.057Z,1513250295.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:15.069Z,1513250295.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:15.083Z,1513250295.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:15.403Z,1513250295.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:15.437Z,1513250295.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:15.814Z,1513250295.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:15.836Z,1513250295.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:15.866Z,1513250295.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:16.206Z,1513250296.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:16.221Z,1513250296.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:16.614Z,1513250296.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:16.663Z,1513250296.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:16.702Z,1513250296.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:17.018Z,1513250297.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:17.062Z,1513250297.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:17.097Z,1513250297.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:17.417Z,1513250297.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:17.440Z,1513250297.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:17.799Z,1513250297.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:17.831Z,1513250297.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:17.893Z,1513250297.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:18.218Z,1513250298.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:18.275Z,1513250298.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:18.596Z,1513250298.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:18.689Z,1513250298.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:18.698Z,1513250298.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:18.995Z,1513250298.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:19.038Z,1513250299.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:19.093Z,1513250299.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:19.419Z,1513250299.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:19.433Z,1513250299.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:19.817Z,1513250299.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:19.837Z,1513250299.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:19.890Z,1513250299.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:20.231Z,1513250300.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:20.253Z,1513250300.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:20.604Z,1513250300.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:20.619Z,1513250300.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:20.689Z,1513250300.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:20.998Z,1513250300.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:21.029Z,1513250301.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:21.093Z,1513250301.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:21.417Z,1513250301.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:21.473Z,1513250301.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:21.814Z,1513250301.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:21.829Z,1513250301.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:21.889Z,1513250301.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:22.209Z,1513250302.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:22.224Z,1513250302.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:22.632Z,1513250302.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:22.647Z,1513250302.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:22.686Z,1513250302.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:23.014Z,1513250303.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:23.043Z,1513250303.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:23.089Z,1513250303.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:23.414Z,1513250303.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:23.449Z,1513250303.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:23.801Z,1513250303.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:23.816Z,1513250303.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:23.885Z,1513250303.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:24.203Z,1513250304.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:24.217Z,1513250304.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:24.642Z,1513250304.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:24.675Z,1513250304.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:24.682Z,1513250304.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:25.003Z,1513250305.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:25.048Z,1513250305.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:25.085Z,1513250305.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:25.409Z,1513250305.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:25.470Z,1513250305.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:25.817Z,1513250305.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:25.848Z,1513250305.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:25.890Z,1513250305.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:26.206Z,1513250306.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:26.220Z,1513250306.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:26.605Z,1513250306.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:26.652Z,1513250306.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:26.685Z,1513250306.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.003Z,1513250307.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.018Z,1513250307.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:27.089Z,1513250307.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.407Z,1513250307.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.424Z,1513250307.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:27.844Z,1513250307.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.893Z,1513250307.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:27.930Z,1513250307.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:28.207Z,1513250308.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:28.259Z,1513250308.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:28.610Z,1513250308.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:28.659Z,1513250308.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:28.690Z,1513250308.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:29.013Z,1513250309.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:29.027Z,1513250309.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:29.093Z,1513250309.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:29.411Z,1513250309.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:29.431Z,1513250309.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:29.803Z,1513250309.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:29.819Z,1513250309.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:29.890Z,1513250309.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:30.203Z,1513250310.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:30.218Z,1513250310.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:30.610Z,1513250310.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:30.687Z,1513250310.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:30.688Z,1513250310.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:31.022Z,1513250311.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:31.057Z,1513250311.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:31.106Z,1513250311.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:31.423Z,1513250311.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:31.442Z,1513250311.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:31.820Z,1513250311.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:31.842Z,1513250311.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:31.904Z,1513250311.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:32.219Z,1513250312.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:32.234Z,1513250312.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:32.595Z,1513250312.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:32.689Z,1513250312.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:32.698Z,1513250312.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:32.995Z,1513250312.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:33.031Z,1513250313.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:33.101Z,1513250313.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:33.403Z,1513250313.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:33.444Z,1513250313.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:33.802Z,1513250313.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:33.816Z,1513250313.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:33.897Z,1513250313.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:34.219Z,1513250314.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:34.264Z,1513250314.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:34.615Z,1513250314.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:34.636Z,1513250314.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:34.693Z,1513250314.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:35.021Z,1513250315.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:35.043Z,1513250315.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:35.108Z,1513250315.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:35.417Z,1513250315.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:35.432Z,1513250315.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:35.795Z,1513250315.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:35.831Z,1513250315.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:35.902Z,1513250315.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:36.199Z,1513250316.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:36.226Z,1513250316.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:36.622Z,1513250316.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:36.644Z,1513250316.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:36.698Z,1513250316.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:37.004Z,1513250317.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:37.076Z,1513250317.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:37.101Z,1513250317.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:37.419Z,1513250317.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:37.435Z,1513250317.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:37.817Z,1513250317.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:37.850Z,1513250317.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:37.897Z,1513250317.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:38.213Z,1513250318.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:38.244Z,1513250318.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:38.603Z,1513250318.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:38.623Z,1513250318.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:38.693Z,1513250318.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:38.999Z,1513250318.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:39.018Z,1513250319.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:39.097Z,1513250319.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:39.404Z,1513250319.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:39.418Z,1513250319.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:39.807Z,1513250319.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:39.821Z,1513250319.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:39.893Z,1513250319.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:40.200Z,1513250320.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:40.221Z,1513250320.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:40.670Z,1513250320.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:40.690Z,1513250320.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:40.719Z,1513250320.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:41.020Z,1513250321.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:41.062Z,1513250321.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:41.093Z,1513250321.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:41.406Z,1513250321.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:41.445Z,1513250321.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:41.799Z,1513250321.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:41.829Z,1513250321.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:41.889Z,1513250321.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:42.195Z,1513250322.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:42.230Z,1513250322.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:42.596Z,1513250322.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:42.650Z,1513250322.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:42.686Z,1513250322.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:43.001Z,1513250323.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:43.016Z,1513250323.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:43.089Z,1513250323.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:43.419Z,1513250323.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:43.445Z,1513250323.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:43.810Z,1513250323.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:43.872Z,1513250323.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:43.885Z,1513250323.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:44.206Z,1513250324.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:44.221Z,1513250324.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:44.604Z,1513250324.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:44.683Z,1513250324.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:44.689Z,1513250324.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:45.016Z,1513250325.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:45.032Z,1513250325.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:45.101Z,1513250325.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:45.396Z,1513250325.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:45.427Z,1513250325.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:45.796Z,1513250325.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:45.824Z,1513250325.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:45.897Z,1513250325.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:46.199Z,1513250326.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:46.226Z,1513250326.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:46.578Z,1513250326.578 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T11:18:46.579Z,1513250326.579 [NAL9602] Data Fault, FailCount= 4
2017-12-14T11:18:46.579Z,1513250326.579 [NAL9602](ERROR): Data Fault
2017-12-14T11:18:46.596Z,1513250326.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:46.694Z,1513250326.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:46.710Z,1513250326.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:46.754Z,1513250326.754 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T11:18:46.986Z,1513250326.986 [NAL9602](INFO): Powering down
2017-12-14T11:18:47.004Z,1513250327.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:47.072Z,1513250327.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:47.097Z,1513250327.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:47.405Z,1513250327.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:47.420Z,1513250327.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:47.809Z,1513250327.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:47.823Z,1513250327.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:47.869Z,1513250327.869 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T11:18:47.869Z,1513250327.869 [NAL9602] No Fault, FailCount= 4
2017-12-14T11:18:47.893Z,1513250327.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:48.204Z,1513250328.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:48.213Z,1513250328.213 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T11:18:48.213Z,1513250328.213 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:18:48.213Z,1513250328.213 [BPC1](ERROR): Data Fault
2017-12-14T11:18:48.222Z,1513250328.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:48.235Z,1513250328.235 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:18:48.608Z,1513250328.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:48.623Z,1513250328.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:48.690Z,1513250328.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:49.003Z,1513250329.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:49.027Z,1513250329.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:49.093Z,1513250329.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:49.408Z,1513250329.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:49.422Z,1513250329.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:49.471Z,1513250329.471 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:18:49.471Z,1513250329.471 [BPC1] No Fault, FailCount= 1
2017-12-14T11:18:49.799Z,1513250329.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:49.872Z,1513250329.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:50.242Z,1513250330.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:50.365Z,1513250330.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:50.604Z,1513250330.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:50.649Z,1513250330.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:50.999Z,1513250330.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:51.014Z,1513250331.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:51.399Z,1513250331.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:51.419Z,1513250331.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:51.800Z,1513250331.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:51.834Z,1513250331.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:52.196Z,1513250332.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:52.211Z,1513250332.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:52.602Z,1513250332.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:52.624Z,1513250332.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:53.002Z,1513250333.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:53.023Z,1513250333.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:53.401Z,1513250333.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:53.416Z,1513250333.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:53.804Z,1513250333.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:53.823Z,1513250333.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:54.189Z,1513250334.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:54.222Z,1513250334.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:54.603Z,1513250334.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:54.619Z,1513250334.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:54.997Z,1513250334.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:55.027Z,1513250335.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:55.407Z,1513250335.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:55.422Z,1513250335.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:55.804Z,1513250335.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:55.818Z,1513250335.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:55.910Z,1513250335.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:56.218Z,1513250336.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:56.232Z,1513250336.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:56.615Z,1513250336.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:56.663Z,1513250336.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:56.706Z,1513250336.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:56.993Z,1513250336.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:57.022Z,1513250337.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:57.109Z,1513250337.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:57.394Z,1513250337.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:57.419Z,1513250337.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:57.792Z,1513250337.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:57.818Z,1513250337.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:57.905Z,1513250337.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:58.193Z,1513250338.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:58.265Z,1513250338.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:58.595Z,1513250338.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:58.702Z,1513250338.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:58.709Z,1513250338.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:58.990Z,1513250338.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:59.006Z,1513250339.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:59.109Z,1513250339.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:59.398Z,1513250339.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:59.436Z,1513250339.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:59.822Z,1513250339.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:18:59.877Z,1513250339.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:18:59.906Z,1513250339.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:00.194Z,1513250340.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:00.239Z,1513250340.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:00.596Z,1513250340.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:00.611Z,1513250340.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:00.702Z,1513250340.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:01.008Z,1513250341.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:01.043Z,1513250341.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:01.105Z,1513250341.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:01.399Z,1513250341.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:01.415Z,1513250341.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:01.801Z,1513250341.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:01.816Z,1513250341.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:02.202Z,1513250342.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:02.223Z,1513250342.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:02.602Z,1513250342.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:02.623Z,1513250342.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:03.038Z,1513250343.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:03.065Z,1513250343.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:03.403Z,1513250343.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:03.418Z,1513250343.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:03.805Z,1513250343.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:03.821Z,1513250343.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:04.200Z,1513250344.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:04.214Z,1513250344.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:04.603Z,1513250344.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:04.623Z,1513250344.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:05.012Z,1513250345.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:05.026Z,1513250345.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:05.403Z,1513250345.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:05.418Z,1513250345.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:05.803Z,1513250345.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:05.820Z,1513250345.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:06.231Z,1513250346.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:06.272Z,1513250346.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:06.595Z,1513250346.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:06.615Z,1513250346.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:07.001Z,1513250347.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:07.016Z,1513250347.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:07.400Z,1513250347.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:07.415Z,1513250347.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:07.804Z,1513250347.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:07.819Z,1513250347.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:08.204Z,1513250348.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:08.220Z,1513250348.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:08.604Z,1513250348.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:08.618Z,1513250348.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:08.999Z,1513250348.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:09.022Z,1513250349.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:09.400Z,1513250349.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:09.474Z,1513250349.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:09.799Z,1513250349.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:09.844Z,1513250349.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:10.199Z,1513250350.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:10.276Z,1513250350.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:10.602Z,1513250350.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:10.619Z,1513250350.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:11.002Z,1513250351.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:11.066Z,1513250351.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:11.407Z,1513250351.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:11.422Z,1513250351.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:14.880Z,1513250354.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:14.931Z,1513250354.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:14.944Z,1513250354.944 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:19:15.030Z,1513250355.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:15.069Z,1513250355.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:15.421Z,1513250355.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:15.467Z,1513250355.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:15.819Z,1513250355.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:15.834Z,1513250355.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:16.206Z,1513250356.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:16.241Z,1513250356.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:16.614Z,1513250356.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:16.643Z,1513250356.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:16.998Z,1513250356.998 [NAL9602](INFO): Powering up NAL9602
2017-12-14T11:19:17.015Z,1513250357.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:17.066Z,1513250357.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:17.405Z,1513250357.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:17.420Z,1513250357.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:17.820Z,1513250357.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:17.861Z,1513250357.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:18.215Z,1513250358.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:18.252Z,1513250358.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:18.617Z,1513250358.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:18.631Z,1513250358.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:19.052Z,1513250359.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:19.084Z,1513250359.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:19.417Z,1513250359.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:19.461Z,1513250359.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:19.820Z,1513250359.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:19.842Z,1513250359.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:20.217Z,1513250360.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:20.232Z,1513250360.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:20.607Z,1513250360.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:20.635Z,1513250360.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:21.034Z,1513250361.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:21.058Z,1513250361.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:21.411Z,1513250361.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:21.444Z,1513250361.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:21.810Z,1513250361.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:21.847Z,1513250361.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:22.232Z,1513250362.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:22.280Z,1513250362.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:22.612Z,1513250362.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:22.649Z,1513250362.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:23.011Z,1513250363.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:23.144Z,1513250363.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:23.411Z,1513250363.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:23.433Z,1513250363.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:23.816Z,1513250363.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:23.831Z,1513250363.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:24.215Z,1513250364.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:24.230Z,1513250364.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:24.615Z,1513250364.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:24.639Z,1513250364.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:25.020Z,1513250365.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:25.035Z,1513250365.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:25.415Z,1513250365.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:25.430Z,1513250365.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:25.812Z,1513250365.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:25.828Z,1513250365.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:26.248Z,1513250366.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:26.288Z,1513250366.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:26.616Z,1513250366.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:26.708Z,1513250366.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:27.007Z,1513250367.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:27.068Z,1513250367.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:27.421Z,1513250367.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:27.437Z,1513250367.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:27.835Z,1513250367.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:27.850Z,1513250367.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:28.191Z,1513250368.191 [NAL9602](INFO): NAL9602 initialized
2017-12-14T11:19:28.208Z,1513250368.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:28.256Z,1513250368.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:28.607Z,1513250368.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:28.702Z,1513250368.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:29.032Z,1513250369.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:29.054Z,1513250369.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:29.446Z,1513250369.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:29.482Z,1513250369.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:29.828Z,1513250369.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:29.876Z,1513250369.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:30.212Z,1513250370.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:30.240Z,1513250370.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:30.610Z,1513250370.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:30.642Z,1513250370.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:31.016Z,1513250371.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:31.040Z,1513250371.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:31.426Z,1513250371.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:31.441Z,1513250371.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:31.826Z,1513250371.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:31.841Z,1513250371.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:32.227Z,1513250372.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:32.251Z,1513250372.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:32.607Z,1513250372.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:32.662Z,1513250372.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:33.017Z,1513250373.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:33.066Z,1513250373.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:33.415Z,1513250373.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:33.471Z,1513250373.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:33.817Z,1513250373.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:33.832Z,1513250373.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:34.218Z,1513250374.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:34.240Z,1513250374.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:34.627Z,1513250374.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:34.642Z,1513250374.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:35.031Z,1513250375.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:35.085Z,1513250375.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:35.424Z,1513250375.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:35.451Z,1513250375.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:35.822Z,1513250375.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:35.896Z,1513250375.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:36.208Z,1513250376.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:36.256Z,1513250376.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:36.606Z,1513250376.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:36.663Z,1513250376.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:37.011Z,1513250377.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:37.049Z,1513250377.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:37.432Z,1513250377.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:37.455Z,1513250377.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:37.821Z,1513250377.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:37.867Z,1513250377.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:38.227Z,1513250378.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:38.250Z,1513250378.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:38.607Z,1513250378.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:38.646Z,1513250378.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:39.043Z,1513250379.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:39.087Z,1513250379.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:39.407Z,1513250379.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:39.439Z,1513250379.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:39.812Z,1513250379.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:39.838Z,1513250379.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:40.206Z,1513250380.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:40.232Z,1513250380.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:40.670Z,1513250380.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:40.728Z,1513250380.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:41.026Z,1513250381.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:41.052Z,1513250381.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:41.418Z,1513250381.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:41.432Z,1513250381.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:41.817Z,1513250381.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:41.831Z,1513250381.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:42.251Z,1513250382.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:42.308Z,1513250382.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:42.617Z,1513250382.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:42.705Z,1513250382.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:43.014Z,1513250383.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:43.061Z,1513250383.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:43.426Z,1513250383.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:43.448Z,1513250383.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:43.821Z,1513250383.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:43.844Z,1513250383.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:44.225Z,1513250384.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:44.239Z,1513250384.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:44.617Z,1513250384.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:44.632Z,1513250384.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:45.022Z,1513250385.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:45.071Z,1513250385.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:45.444Z,1513250385.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:45.466Z,1513250385.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:45.808Z,1513250385.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:45.847Z,1513250385.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:46.211Z,1513250386.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:46.242Z,1513250386.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:46.629Z,1513250386.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:46.664Z,1513250386.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:47.043Z,1513250387.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:47.058Z,1513250387.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:47.422Z,1513250387.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:47.464Z,1513250387.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:47.811Z,1513250387.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:47.826Z,1513250387.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:48.215Z,1513250388.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:48.230Z,1513250388.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:48.659Z,1513250388.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:48.694Z,1513250388.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:49.007Z,1513250389.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:49.043Z,1513250389.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:49.432Z,1513250389.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:49.453Z,1513250389.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:49.834Z,1513250389.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:49.882Z,1513250389.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:50.234Z,1513250390.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:50.249Z,1513250390.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:50.623Z,1513250390.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:50.670Z,1513250390.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:51.015Z,1513250391.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:51.044Z,1513250391.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:51.418Z,1513250391.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:51.446Z,1513250391.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:51.838Z,1513250391.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:51.882Z,1513250391.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:52.213Z,1513250392.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:52.316Z,1513250392.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:52.627Z,1513250392.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:52.642Z,1513250392.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:53.034Z,1513250393.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:53.073Z,1513250393.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:53.433Z,1513250393.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:53.450Z,1513250393.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:53.807Z,1513250393.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:53.844Z,1513250393.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:54.220Z,1513250394.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:54.235Z,1513250394.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:54.614Z,1513250394.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:54.703Z,1513250394.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:55.046Z,1513250395.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:55.085Z,1513250395.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:55.422Z,1513250395.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:55.466Z,1513250395.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:55.821Z,1513250395.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:55.862Z,1513250395.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:56.221Z,1513250396.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:56.283Z,1513250396.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:56.621Z,1513250396.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:56.721Z,1513250396.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:57.026Z,1513250397.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:57.099Z,1513250397.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:57.412Z,1513250397.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:57.440Z,1513250397.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:57.808Z,1513250397.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:57.846Z,1513250397.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:58.230Z,1513250398.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:58.352Z,1513250398.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:58.625Z,1513250398.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:58.669Z,1513250398.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:59.038Z,1513250399.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:59.099Z,1513250399.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:59.422Z,1513250399.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:59.462Z,1513250399.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:19:59.812Z,1513250399.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:19:59.856Z,1513250399.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:00.208Z,1513250400.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:00.224Z,1513250400.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:00.617Z,1513250400.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:00.632Z,1513250400.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:01.012Z,1513250401.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:01.045Z,1513250401.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:01.434Z,1513250401.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:01.466Z,1513250401.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:01.826Z,1513250401.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:01.872Z,1513250401.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:02.225Z,1513250402.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:02.243Z,1513250402.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:02.611Z,1513250402.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:02.626Z,1513250402.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:03.014Z,1513250403.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:03.047Z,1513250403.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:03.414Z,1513250403.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:03.428Z,1513250403.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:03.812Z,1513250403.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:03.838Z,1513250403.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:04.218Z,1513250404.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:04.232Z,1513250404.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:04.647Z,1513250404.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:04.683Z,1513250404.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:05.032Z,1513250405.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:05.079Z,1513250405.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:05.426Z,1513250405.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:05.440Z,1513250405.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:05.807Z,1513250405.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:05.845Z,1513250405.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:06.207Z,1513250406.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:06.247Z,1513250406.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:06.634Z,1513250406.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:06.648Z,1513250406.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:07.009Z,1513250407.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:07.043Z,1513250407.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:07.430Z,1513250407.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:07.484Z,1513250407.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:07.865Z,1513250407.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:07.895Z,1513250407.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:08.218Z,1513250408.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:08.251Z,1513250408.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:08.608Z,1513250408.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:08.656Z,1513250408.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:09.019Z,1513250409.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:09.061Z,1513250409.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:09.416Z,1513250409.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:09.439Z,1513250409.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:09.810Z,1513250409.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:09.824Z,1513250409.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:10.216Z,1513250410.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:10.236Z,1513250410.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:10.617Z,1513250410.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:10.709Z,1513250410.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:11.032Z,1513250411.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:11.049Z,1513250411.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:11.430Z,1513250411.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:11.480Z,1513250411.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:14.931Z,1513250414.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:14.947Z,1513250414.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:15.068Z,1513250415.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:15.103Z,1513250415.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:15.455Z,1513250415.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:15.472Z,1513250415.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:15.862Z,1513250415.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:15.879Z,1513250415.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:16.256Z,1513250416.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:16.277Z,1513250416.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:16.636Z,1513250416.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:16.665Z,1513250416.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:17.049Z,1513250417.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:17.084Z,1513250417.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:17.444Z,1513250417.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:17.460Z,1513250417.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:17.835Z,1513250417.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:17.883Z,1513250417.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:18.260Z,1513250418.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:18.431Z,1513250418.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:18.670Z,1513250418.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:18.691Z,1513250418.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:19.048Z,1513250419.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:19.073Z,1513250419.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:19.447Z,1513250419.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:19.486Z,1513250419.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:19.836Z,1513250419.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:19.891Z,1513250419.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:20.258Z,1513250420.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:20.273Z,1513250420.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:20.648Z,1513250420.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:20.701Z,1513250420.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:21.053Z,1513250421.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:21.087Z,1513250421.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:21.439Z,1513250421.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:21.491Z,1513250421.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:21.844Z,1513250421.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:21.851Z,1513250421.851 [PNI_TCM](ERROR): CRC does not match. Expected:0x16850 got:0x16702
2017-12-14T11:20:21.885Z,1513250421.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:22.251Z,1513250422.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:22.278Z,1513250422.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:22.671Z,1513250422.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:22.720Z,1513250422.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:23.057Z,1513250423.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:23.087Z,1513250423.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:23.437Z,1513250423.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:23.470Z,1513250423.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:23.836Z,1513250423.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:23.866Z,1513250423.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:24.235Z,1513250424.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:24.276Z,1513250424.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:24.722Z,1513250424.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:24.761Z,1513250424.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:25.061Z,1513250425.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:25.075Z,1513250425.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:25.459Z,1513250425.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:25.473Z,1513250425.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:25.843Z,1513250425.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:25.875Z,1513250425.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:26.243Z,1513250426.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:26.265Z,1513250426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:26.631Z,1513250426.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:26.664Z,1513250426.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:27.043Z,1513250427.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:27.070Z,1513250427.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:27.458Z,1513250427.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:27.478Z,1513250427.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:27.838Z,1513250427.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:27.873Z,1513250427.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:28.266Z,1513250428.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:28.272Z,1513250428.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T11:20:28.351Z,1513250428.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:28.644Z,1513250428.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:28.659Z,1513250428.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:29.037Z,1513250429.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:29.080Z,1513250429.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:29.442Z,1513250429.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:29.464Z,1513250429.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:29.845Z,1513250429.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:29.898Z,1513250429.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:30.250Z,1513250430.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:30.264Z,1513250430.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:30.667Z,1513250430.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:30.682Z,1513250430.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:31.070Z,1513250431.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:31.107Z,1513250431.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:31.453Z,1513250431.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:31.468Z,1513250431.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:31.839Z,1513250431.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:31.859Z,1513250431.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:32.247Z,1513250432.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:32.342Z,1513250432.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:32.655Z,1513250432.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:32.670Z,1513250432.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:33.059Z,1513250433.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:33.079Z,1513250433.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:33.447Z,1513250433.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:33.462Z,1513250433.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:33.832Z,1513250433.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:33.870Z,1513250433.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:34.261Z,1513250434.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:34.288Z,1513250434.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:34.649Z,1513250434.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:34.664Z,1513250434.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:35.051Z,1513250435.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:35.082Z,1513250435.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:35.444Z,1513250435.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:35.491Z,1513250435.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:35.838Z,1513250435.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:35.871Z,1513250435.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:36.252Z,1513250436.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:36.266Z,1513250436.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:36.659Z,1513250436.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:36.757Z,1513250436.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:37.042Z,1513250437.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:37.086Z,1513250437.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:37.455Z,1513250437.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:37.482Z,1513250437.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:37.847Z,1513250437.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:37.863Z,1513250437.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:38.248Z,1513250438.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:38.264Z,1513250438.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:38.712Z,1513250438.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:38.747Z,1513250438.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:39.041Z,1513250439.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:39.064Z,1513250439.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:39.452Z,1513250439.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:39.471Z,1513250439.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:39.852Z,1513250439.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:39.871Z,1513250439.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:40.250Z,1513250440.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:40.366Z,1513250440.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:40.664Z,1513250440.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:40.721Z,1513250440.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:41.057Z,1513250441.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:41.072Z,1513250441.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:41.438Z,1513250441.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:41.466Z,1513250441.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:41.832Z,1513250441.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:41.870Z,1513250441.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:42.252Z,1513250442.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:42.353Z,1513250442.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:42.653Z,1513250442.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:42.681Z,1513250442.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:43.046Z,1513250443.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:43.100Z,1513250443.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:43.442Z,1513250443.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:43.487Z,1513250443.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:43.832Z,1513250443.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:43.915Z,1513250443.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:44.255Z,1513250444.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:44.270Z,1513250444.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:44.656Z,1513250444.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:44.671Z,1513250444.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:45.050Z,1513250445.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:45.098Z,1513250445.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:45.450Z,1513250445.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:45.460Z,1513250445.460 [PNI_TCM](ERROR): CRC does not match. Expected:0x41312 got:0x1858
2017-12-14T11:20:45.503Z,1513250445.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:45.832Z,1513250445.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:45.866Z,1513250445.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:46.257Z,1513250446.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:46.272Z,1513250446.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:46.655Z,1513250446.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:46.681Z,1513250446.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:47.067Z,1513250447.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:47.087Z,1513250447.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:47.447Z,1513250447.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:47.474Z,1513250447.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:47.843Z,1513250447.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:47.866Z,1513250447.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:48.260Z,1513250448.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:48.287Z,1513250448.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:48.652Z,1513250448.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:48.683Z,1513250448.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:49.059Z,1513250449.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:49.087Z,1513250449.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:49.445Z,1513250449.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:49.460Z,1513250449.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:49.842Z,1513250449.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:49.886Z,1513250449.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:50.263Z,1513250450.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:50.294Z,1513250450.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:50.679Z,1513250450.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:50.742Z,1513250450.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:51.050Z,1513250451.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:51.083Z,1513250451.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:51.450Z,1513250451.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:51.495Z,1513250451.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:51.839Z,1513250451.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:51.874Z,1513250451.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:52.244Z,1513250452.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:52.251Z,1513250452.251 [PNI_TCM](ERROR): CRC does not match. Expected:0x5212 got:0x7490
2017-12-14T11:20:52.320Z,1513250452.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:52.654Z,1513250452.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:52.730Z,1513250452.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:53.038Z,1513250453.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:53.086Z,1513250453.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:53.466Z,1513250453.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:53.495Z,1513250453.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:53.856Z,1513250453.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:53.881Z,1513250453.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:54.250Z,1513250454.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:54.275Z,1513250454.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:54.638Z,1513250454.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:54.678Z,1513250454.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:55.038Z,1513250455.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:55.066Z,1513250455.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:55.450Z,1513250455.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:55.465Z,1513250455.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:55.837Z,1513250455.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:55.864Z,1513250455.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:56.245Z,1513250456.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:56.352Z,1513250456.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:56.679Z,1513250456.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:56.739Z,1513250456.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:57.055Z,1513250457.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:57.070Z,1513250457.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:57.450Z,1513250457.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:57.476Z,1513250457.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:57.829Z,1513250457.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:57.874Z,1513250457.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:58.229Z,1513250458.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:58.245Z,1513250458.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:58.634Z,1513250458.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:58.679Z,1513250458.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:59.046Z,1513250459.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:59.061Z,1513250459.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:59.448Z,1513250459.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:59.489Z,1513250459.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:20:59.867Z,1513250459.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:20:59.874Z,1513250459.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x7971 got:0x49059
2017-12-14T11:20:59.901Z,1513250459.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:00.268Z,1513250460.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:00.366Z,1513250460.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:00.644Z,1513250460.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:00.673Z,1513250460.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:01.036Z,1513250461.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:01.078Z,1513250461.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:01.438Z,1513250461.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:01.470Z,1513250461.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:01.844Z,1513250461.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:01.875Z,1513250461.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:02.252Z,1513250462.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:02.289Z,1513250462.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:02.646Z,1513250462.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:02.703Z,1513250462.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:03.067Z,1513250463.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:03.092Z,1513250463.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:03.445Z,1513250463.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:03.459Z,1513250463.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:03.846Z,1513250463.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:03.868Z,1513250463.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:04.250Z,1513250464.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:04.311Z,1513250464.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:04.311Z,1513250464.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 216
2017-12-14T11:21:04.311Z,1513250464.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:21:04.312Z,1513250464.312 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:04.318Z,1513250464.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 216
2017-12-14T11:21:04.318Z,1513250464.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:21:04.320Z,1513250464.320 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:04.320Z,1513250464.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 216
2017-12-14T11:21:04.320Z,1513250464.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:21:04.355Z,1513250464.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:21:04.356Z,1513250464.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:21:04.356Z,1513250464.356 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:21:04.703Z,1513250464.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:04.780Z,1513250464.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:21:04.780Z,1513250464.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 216
2017-12-14T11:21:04.780Z,1513250464.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:21:04.781Z,1513250464.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 216
2017-12-14T11:21:04.781Z,1513250464.781 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:21:04.781Z,1513250464.781 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 216
2017-12-14T11:21:05.049Z,1513250465.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:05.064Z,1513250465.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:21:05.064Z,1513250465.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:21:05.064Z,1513250465.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:21:05.065Z,1513250465.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:21:05.065Z,1513250465.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:21:05.065Z,1513250465.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:21:05.066Z,1513250465.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:21:05.066Z,1513250465.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:21:05.066Z,1513250465.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:21:05.442Z,1513250465.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:05.487Z,1513250465.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:05.838Z,1513250465.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:05.871Z,1513250465.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:06.277Z,1513250466.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:06.320Z,1513250466.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:06.678Z,1513250466.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:06.728Z,1513250466.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:07.068Z,1513250467.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:07.082Z,1513250467.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:07.461Z,1513250467.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:07.478Z,1513250467.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:07.832Z,1513250467.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:07.871Z,1513250467.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:08.244Z,1513250468.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:08.268Z,1513250468.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:08.644Z,1513250468.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:08.672Z,1513250468.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:09.038Z,1513250469.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:09.084Z,1513250469.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:09.466Z,1513250469.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:09.502Z,1513250469.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:09.850Z,1513250469.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:09.865Z,1513250469.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:10.249Z,1513250470.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:10.282Z,1513250470.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:10.647Z,1513250470.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:10.679Z,1513250470.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:10.697Z,1513250470.697 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:21:10.697Z,1513250470.697 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:21:10.697Z,1513250470.697 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:21:10.698Z,1513250470.698 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:21:11.031Z,1513250471.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:11.058Z,1513250471.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-12-14T11:21:11.075Z,1513250471.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:11.079Z,1513250471.079 [Default:CheckIn:D] Stopped
2017-12-14T11:21:11.079Z,1513250471.079 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:21:11.442Z,1513250471.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:11.468Z,1513250471.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:11.471Z,1513250471.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 647.928125 min 
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn:E] Stopped
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn] Stopped
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn](INFO): Running loop #63
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn] Running Loop=63
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:21:11.472Z,1513250471.472 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:21:15.084Z,1513250475.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:15.132Z,1513250475.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:15.246Z,1513250475.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:15.279Z,1513250475.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:15.622Z,1513250475.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:15.653Z,1513250475.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:16.029Z,1513250476.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:16.059Z,1513250476.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:16.411Z,1513250476.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:16.426Z,1513250476.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:16.827Z,1513250476.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:16.859Z,1513250476.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:17.203Z,1513250477.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:17.259Z,1513250477.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:17.620Z,1513250477.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:17.659Z,1513250477.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:18.033Z,1513250478.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:18.064Z,1513250478.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:18.435Z,1513250478.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:18.473Z,1513250478.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:18.821Z,1513250478.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:18.857Z,1513250478.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:19.212Z,1513250479.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:19.231Z,1513250479.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:19.633Z,1513250479.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:19.678Z,1513250479.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:20.013Z,1513250480.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:20.040Z,1513250480.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:20.436Z,1513250480.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:20.484Z,1513250480.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:20.834Z,1513250480.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:20.907Z,1513250480.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:21.212Z,1513250481.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:21.253Z,1513250481.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:21.609Z,1513250481.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:21.660Z,1513250481.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:22.005Z,1513250482.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:22.056Z,1513250482.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:22.406Z,1513250482.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:22.489Z,1513250482.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:22.830Z,1513250482.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:22.879Z,1513250482.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:23.227Z,1513250483.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:23.270Z,1513250483.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:23.621Z,1513250483.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:23.663Z,1513250483.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:24.024Z,1513250484.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:24.051Z,1513250484.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:24.446Z,1513250484.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:24.471Z,1513250484.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:24.799Z,1513250484.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:24.827Z,1513250484.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:25.199Z,1513250485.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:25.246Z,1513250485.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:25.600Z,1513250485.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:25.634Z,1513250485.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:26.032Z,1513250486.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:26.056Z,1513250486.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:26.491Z,1513250486.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:26.530Z,1513250486.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:26.853Z,1513250486.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:26.868Z,1513250486.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:27.214Z,1513250487.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:27.298Z,1513250487.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:27.636Z,1513250487.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:27.651Z,1513250487.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:28.011Z,1513250488.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:28.076Z,1513250488.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:28.427Z,1513250488.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:28.458Z,1513250488.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:28.806Z,1513250488.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:28.878Z,1513250488.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:29.200Z,1513250489.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:29.264Z,1513250489.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:29.621Z,1513250489.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:29.640Z,1513250489.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:30.053Z,1513250490.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:30.109Z,1513250490.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:30.444Z,1513250490.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:30.487Z,1513250490.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:30.802Z,1513250490.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:30.843Z,1513250490.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:31.202Z,1513250491.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:31.246Z,1513250491.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:31.602Z,1513250491.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:31.621Z,1513250491.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:31.655Z,1513250491.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:32.007Z,1513250492.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:32.070Z,1513250492.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:32.418Z,1513250492.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:32.421Z,1513250492.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:32.458Z,1513250492.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:32.816Z,1513250492.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:32.852Z,1513250492.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:33.214Z,1513250493.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:33.250Z,1513250493.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:33.611Z,1513250493.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:33.631Z,1513250493.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:34.030Z,1513250494.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:34.070Z,1513250494.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:34.408Z,1513250494.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:34.441Z,1513250494.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:34.810Z,1513250494.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:34.851Z,1513250494.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:35.211Z,1513250495.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:35.234Z,1513250495.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:35.621Z,1513250495.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:35.650Z,1513250495.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:36.024Z,1513250496.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:36.079Z,1513250496.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:36.426Z,1513250496.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:36.492Z,1513250496.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:36.803Z,1513250496.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:36.848Z,1513250496.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:37.200Z,1513250497.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:37.260Z,1513250497.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:37.601Z,1513250497.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:37.645Z,1513250497.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:38.001Z,1513250498.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:38.044Z,1513250498.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:38.423Z,1513250498.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:38.452Z,1513250498.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:38.871Z,1513250498.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:38.887Z,1513250498.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:39.213Z,1513250499.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:39.247Z,1513250499.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:39.619Z,1513250499.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:39.688Z,1513250499.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:40.005Z,1513250500.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:40.058Z,1513250500.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:40.400Z,1513250500.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:40.423Z,1513250500.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:40.811Z,1513250500.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:40.831Z,1513250500.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:41.220Z,1513250501.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:41.274Z,1513250501.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:41.622Z,1513250501.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:41.646Z,1513250501.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:42.024Z,1513250502.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:42.052Z,1513250502.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:42.425Z,1513250502.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:42.469Z,1513250502.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:42.801Z,1513250502.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:42.877Z,1513250502.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:43.200Z,1513250503.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:43.232Z,1513250503.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:43.604Z,1513250503.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:43.630Z,1513250503.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:44.004Z,1513250504.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:44.035Z,1513250504.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:44.438Z,1513250504.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:44.479Z,1513250504.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:44.827Z,1513250504.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:44.847Z,1513250504.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:45.218Z,1513250505.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:45.233Z,1513250505.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:45.599Z,1513250505.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:45.626Z,1513250505.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:46.003Z,1513250506.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:46.042Z,1513250506.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:46.400Z,1513250506.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:46.435Z,1513250506.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:46.799Z,1513250506.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:46.839Z,1513250506.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:47.201Z,1513250507.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:47.216Z,1513250507.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:47.614Z,1513250507.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:47.641Z,1513250507.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:48.027Z,1513250508.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:48.047Z,1513250508.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:48.427Z,1513250508.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:48.447Z,1513250508.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:48.799Z,1513250508.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:48.839Z,1513250508.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:49.199Z,1513250509.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:49.283Z,1513250509.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:49.615Z,1513250509.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:49.676Z,1513250509.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:50.001Z,1513250510.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:50.016Z,1513250510.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:50.417Z,1513250510.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:50.459Z,1513250510.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:50.861Z,1513250510.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:50.876Z,1513250510.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:51.218Z,1513250511.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:51.267Z,1513250511.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:51.608Z,1513250511.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:51.623Z,1513250511.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:52.006Z,1513250512.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:52.020Z,1513250512.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:52.418Z,1513250512.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:52.452Z,1513250512.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:52.808Z,1513250512.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:52.827Z,1513250512.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:53.206Z,1513250513.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:53.229Z,1513250513.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:53.615Z,1513250513.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:53.629Z,1513250513.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:54.018Z,1513250514.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:54.032Z,1513250514.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:54.418Z,1513250514.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:54.433Z,1513250514.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:54.809Z,1513250514.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:54.824Z,1513250514.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:55.216Z,1513250515.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:55.262Z,1513250515.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:55.607Z,1513250515.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:55.650Z,1513250515.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:56.006Z,1513250516.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:56.026Z,1513250516.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:56.418Z,1513250516.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:56.433Z,1513250516.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:56.821Z,1513250516.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:56.837Z,1513250516.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:57.218Z,1513250517.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:57.232Z,1513250517.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:57.606Z,1513250517.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:57.631Z,1513250517.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:58.007Z,1513250518.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:58.028Z,1513250518.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:58.425Z,1513250518.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:58.460Z,1513250518.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:58.832Z,1513250518.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:58.860Z,1513250518.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:59.241Z,1513250519.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:59.255Z,1513250519.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:21:59.616Z,1513250519.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:21:59.682Z,1513250519.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:00.009Z,1513250520.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:00.044Z,1513250520.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:00.404Z,1513250520.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:00.420Z,1513250520.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:00.817Z,1513250520.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:00.848Z,1513250520.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:01.204Z,1513250521.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:01.223Z,1513250521.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:01.618Z,1513250521.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:01.645Z,1513250521.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:02.052Z,1513250522.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:02.076Z,1513250522.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:02.450Z,1513250522.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:02.464Z,1513250522.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:02.806Z,1513250522.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:02.833Z,1513250522.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:03.213Z,1513250523.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:03.235Z,1513250523.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:03.614Z,1513250523.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:03.629Z,1513250523.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:04.009Z,1513250524.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:04.031Z,1513250524.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:04.416Z,1513250524.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:04.431Z,1513250524.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:04.818Z,1513250524.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:04.833Z,1513250524.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:05.239Z,1513250525.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:05.271Z,1513250525.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:05.616Z,1513250525.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:05.631Z,1513250525.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:06.010Z,1513250526.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:06.024Z,1513250526.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:06.409Z,1513250526.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:06.425Z,1513250526.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:06.839Z,1513250526.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:06.980Z,1513250526.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:07.206Z,1513250527.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:07.233Z,1513250527.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:07.627Z,1513250527.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:07.647Z,1513250527.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:08.023Z,1513250528.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:08.038Z,1513250528.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:08.447Z,1513250528.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:08.498Z,1513250528.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:08.822Z,1513250528.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:08.837Z,1513250528.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:09.199Z,1513250529.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:09.236Z,1513250529.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:09.647Z,1513250529.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:09.673Z,1513250529.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:10.015Z,1513250530.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:10.035Z,1513250530.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:10.427Z,1513250530.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:10.447Z,1513250530.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:10.826Z,1513250530.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:10.847Z,1513250530.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:11.226Z,1513250531.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:11.242Z,1513250531.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:11.646Z,1513250531.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:11.739Z,1513250531.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:15.270Z,1513250535.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:15.285Z,1513250535.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:15.385Z,1513250535.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:15.430Z,1513250535.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:15.754Z,1513250535.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:15.778Z,1513250535.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:16.153Z,1513250536.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:16.222Z,1513250536.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:16.551Z,1513250536.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:16.582Z,1513250536.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:16.946Z,1513250536.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:16.994Z,1513250536.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:17.342Z,1513250537.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:17.369Z,1513250537.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:17.743Z,1513250537.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:17.762Z,1513250537.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:18.147Z,1513250538.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:18.170Z,1513250538.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:18.551Z,1513250538.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:18.565Z,1513250538.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:18.950Z,1513250538.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:18.968Z,1513250538.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:19.350Z,1513250539.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:19.364Z,1513250539.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:19.743Z,1513250539.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:19.761Z,1513250539.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:20.149Z,1513250540.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:20.164Z,1513250540.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:20.550Z,1513250540.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:20.564Z,1513250540.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:20.938Z,1513250540.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:20.960Z,1513250540.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:21.354Z,1513250541.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:21.370Z,1513250541.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:21.757Z,1513250541.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:21.780Z,1513250541.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:22.156Z,1513250542.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:22.171Z,1513250542.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:22.546Z,1513250542.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:22.560Z,1513250542.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:22.954Z,1513250542.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:22.975Z,1513250542.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:23.343Z,1513250543.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:23.359Z,1513250543.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:23.736Z,1513250543.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:23.776Z,1513250543.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:24.135Z,1513250544.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:24.167Z,1513250544.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:24.559Z,1513250544.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:24.574Z,1513250544.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:24.967Z,1513250544.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:24.987Z,1513250544.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:25.347Z,1513250545.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:25.413Z,1513250545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:25.739Z,1513250545.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:25.773Z,1513250545.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:26.139Z,1513250546.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:26.171Z,1513250546.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:26.535Z,1513250546.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:26.571Z,1513250546.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:26.935Z,1513250546.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:26.973Z,1513250546.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:27.365Z,1513250547.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:27.379Z,1513250547.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:27.764Z,1513250547.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:27.778Z,1513250547.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:28.145Z,1513250548.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:28.182Z,1513250548.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:28.540Z,1513250548.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:28.571Z,1513250548.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:28.946Z,1513250548.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:28.969Z,1513250548.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:29.342Z,1513250549.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:29.356Z,1513250549.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:29.747Z,1513250549.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:29.767Z,1513250549.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:30.143Z,1513250550.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:30.163Z,1513250550.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:30.546Z,1513250550.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:30.592Z,1513250550.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:30.958Z,1513250550.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:30.973Z,1513250550.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:31.359Z,1513250551.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:31.379Z,1513250551.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:31.733Z,1513250551.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:31.763Z,1513250551.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:32.136Z,1513250552.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:32.163Z,1513250552.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:32.535Z,1513250552.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:32.571Z,1513250552.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:32.935Z,1513250552.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:32.979Z,1513250552.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:33.358Z,1513250553.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:33.372Z,1513250553.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:33.786Z,1513250553.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:33.880Z,1513250553.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:34.160Z,1513250554.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:34.179Z,1513250554.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:34.535Z,1513250554.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:34.567Z,1513250554.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:34.939Z,1513250554.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:34.976Z,1513250554.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:35.335Z,1513250555.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:35.376Z,1513250555.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:35.744Z,1513250555.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:35.776Z,1513250555.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:36.141Z,1513250556.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:36.175Z,1513250556.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:36.553Z,1513250556.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:36.579Z,1513250556.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:36.954Z,1513250556.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:37.032Z,1513250557.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:37.346Z,1513250557.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:37.410Z,1513250557.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:37.746Z,1513250557.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:37.761Z,1513250557.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:38.142Z,1513250558.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:38.162Z,1513250558.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:38.544Z,1513250558.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:38.595Z,1513250558.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:38.949Z,1513250558.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:38.963Z,1513250558.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:39.349Z,1513250559.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:39.395Z,1513250559.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:39.750Z,1513250559.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:39.771Z,1513250559.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:40.149Z,1513250560.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:40.163Z,1513250560.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:40.542Z,1513250560.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:40.562Z,1513250560.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:40.939Z,1513250560.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:40.967Z,1513250560.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:41.336Z,1513250561.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:41.367Z,1513250561.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:41.736Z,1513250561.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:41.771Z,1513250561.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:42.145Z,1513250562.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:42.160Z,1513250562.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:42.557Z,1513250562.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:42.578Z,1513250562.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:42.958Z,1513250562.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:42.984Z,1513250562.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:43.365Z,1513250563.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:43.396Z,1513250563.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:43.746Z,1513250563.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:43.760Z,1513250563.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:44.146Z,1513250564.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:44.161Z,1513250564.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:44.547Z,1513250564.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:44.567Z,1513250564.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:44.942Z,1513250564.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:44.967Z,1513250564.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:45.358Z,1513250565.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:45.373Z,1513250565.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:45.757Z,1513250565.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:45.771Z,1513250565.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:46.155Z,1513250566.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:46.169Z,1513250566.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:46.574Z,1513250566.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:46.606Z,1513250566.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:46.955Z,1513250566.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:46.975Z,1513250566.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:47.335Z,1513250567.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:47.362Z,1513250567.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:47.749Z,1513250567.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:47.803Z,1513250567.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:48.136Z,1513250568.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:48.167Z,1513250568.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:48.559Z,1513250568.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:48.574Z,1513250568.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:48.959Z,1513250568.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:48.977Z,1513250568.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:49.354Z,1513250569.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:49.368Z,1513250569.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:49.775Z,1513250569.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:49.816Z,1513250569.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:50.136Z,1513250570.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:50.167Z,1513250570.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:50.536Z,1513250570.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:50.552Z,1513250570.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:50.935Z,1513250570.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:50.950Z,1513250570.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:51.350Z,1513250571.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:51.379Z,1513250571.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:51.765Z,1513250571.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:51.780Z,1513250571.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:52.149Z,1513250572.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:52.179Z,1513250572.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:52.535Z,1513250572.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:52.555Z,1513250572.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:52.977Z,1513250572.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:53.004Z,1513250573.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:53.343Z,1513250573.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:53.359Z,1513250573.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:53.740Z,1513250573.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:53.755Z,1513250573.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:54.141Z,1513250574.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:54.156Z,1513250574.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:54.548Z,1513250574.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:54.563Z,1513250574.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:54.988Z,1513250574.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:55.037Z,1513250575.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:55.350Z,1513250575.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:55.383Z,1513250575.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:55.740Z,1513250575.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:55.756Z,1513250575.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:56.161Z,1513250576.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:56.189Z,1513250576.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:56.545Z,1513250576.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:56.560Z,1513250576.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:56.950Z,1513250576.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:56.964Z,1513250576.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:57.358Z,1513250577.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:57.388Z,1513250577.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:57.750Z,1513250577.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:57.765Z,1513250577.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:58.150Z,1513250578.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:58.165Z,1513250578.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:58.544Z,1513250578.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:58.559Z,1513250578.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:58.944Z,1513250578.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:58.959Z,1513250578.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:59.382Z,1513250579.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:59.417Z,1513250579.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:22:59.746Z,1513250579.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:22:59.830Z,1513250579.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:00.147Z,1513250580.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:00.167Z,1513250580.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:00.550Z,1513250580.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:00.571Z,1513250580.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:00.959Z,1513250580.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:01.011Z,1513250581.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:01.358Z,1513250581.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:01.372Z,1513250581.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:01.748Z,1513250581.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:01.792Z,1513250581.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:02.148Z,1513250582.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:02.163Z,1513250582.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:02.547Z,1513250582.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:02.586Z,1513250582.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:02.956Z,1513250582.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:02.971Z,1513250582.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:03.348Z,1513250583.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:03.369Z,1513250583.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:03.758Z,1513250583.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:03.772Z,1513250583.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:04.159Z,1513250584.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:04.179Z,1513250584.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:04.546Z,1513250584.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:04.568Z,1513250584.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:05.008Z,1513250585.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:05.022Z,1513250585.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:05.335Z,1513250585.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:05.373Z,1513250585.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:05.756Z,1513250585.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:05.783Z,1513250585.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:06.135Z,1513250586.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:06.175Z,1513250586.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:06.569Z,1513250586.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:06.583Z,1513250586.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:06.964Z,1513250586.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:06.980Z,1513250586.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:07.349Z,1513250587.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:07.383Z,1513250587.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:07.735Z,1513250587.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:07.749Z,1513250587.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:08.139Z,1513250588.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:08.154Z,1513250588.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:08.543Z,1513250588.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:08.558Z,1513250588.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:08.941Z,1513250588.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:08.955Z,1513250588.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:09.351Z,1513250589.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:09.382Z,1513250589.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:09.759Z,1513250589.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:09.788Z,1513250589.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:10.150Z,1513250590.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:10.203Z,1513250590.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:10.545Z,1513250590.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:10.561Z,1513250590.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:10.950Z,1513250590.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:10.966Z,1513250590.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:11.345Z,1513250591.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:11.360Z,1513250591.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:11.743Z,1513250591.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:11.764Z,1513250591.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:15.267Z,1513250595.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:15.290Z,1513250595.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:15.404Z,1513250595.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:15.439Z,1513250595.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:15.761Z,1513250595.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:15.792Z,1513250595.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:16.197Z,1513250596.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:16.249Z,1513250596.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:16.539Z,1513250596.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:16.576Z,1513250596.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:16.939Z,1513250596.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:16.971Z,1513250596.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:17.339Z,1513250597.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:17.375Z,1513250597.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:17.744Z,1513250597.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:17.770Z,1513250597.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:18.147Z,1513250598.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:18.173Z,1513250598.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:18.560Z,1513250598.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:18.575Z,1513250598.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:18.967Z,1513250598.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:18.982Z,1513250598.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:19.357Z,1513250599.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:19.372Z,1513250599.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:19.739Z,1513250599.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:19.775Z,1513250599.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:20.147Z,1513250600.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:20.180Z,1513250600.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:20.552Z,1513250600.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:20.580Z,1513250600.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:20.952Z,1513250600.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:20.986Z,1513250600.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:21.359Z,1513250601.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:21.386Z,1513250601.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:21.757Z,1513250601.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:21.787Z,1513250601.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:22.169Z,1513250602.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:22.188Z,1513250602.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:22.546Z,1513250602.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:22.675Z,1513250602.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:22.942Z,1513250602.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:22.971Z,1513250602.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:23.344Z,1513250603.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:23.395Z,1513250603.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:23.744Z,1513250603.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:23.770Z,1513250603.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:24.139Z,1513250604.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:24.213Z,1513250604.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:24.563Z,1513250604.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:24.583Z,1513250604.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:24.953Z,1513250604.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:24.988Z,1513250604.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:25.367Z,1513250605.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:25.382Z,1513250605.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:25.739Z,1513250605.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:25.754Z,1513250605.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:26.139Z,1513250606.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:26.175Z,1513250606.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:26.540Z,1513250606.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:26.574Z,1513250606.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:26.955Z,1513250606.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:26.979Z,1513250606.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:27.353Z,1513250607.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:27.383Z,1513250607.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:27.776Z,1513250607.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:27.806Z,1513250607.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:28.154Z,1513250608.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:28.178Z,1513250608.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:28.545Z,1513250608.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:28.560Z,1513250608.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:28.990Z,1513250608.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:29.029Z,1513250609.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:29.355Z,1513250609.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:29.391Z,1513250609.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:29.748Z,1513250609.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:29.767Z,1513250609.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:30.145Z,1513250610.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:30.160Z,1513250610.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:30.554Z,1513250610.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:30.569Z,1513250610.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:30.957Z,1513250610.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:30.985Z,1513250610.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:31.350Z,1513250611.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:31.364Z,1513250611.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:31.748Z,1513250611.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:31.762Z,1513250611.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:32.180Z,1513250612.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:32.256Z,1513250612.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:32.540Z,1513250612.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:32.579Z,1513250612.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:32.939Z,1513250612.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:32.974Z,1513250612.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:33.361Z,1513250613.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:33.376Z,1513250613.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:33.762Z,1513250613.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:33.777Z,1513250613.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:34.163Z,1513250614.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:34.177Z,1513250614.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:34.539Z,1513250614.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:34.566Z,1513250614.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:34.957Z,1513250614.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:34.972Z,1513250614.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:35.339Z,1513250615.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:35.366Z,1513250615.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:35.740Z,1513250615.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:35.771Z,1513250615.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:36.139Z,1513250616.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:36.170Z,1513250616.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:36.563Z,1513250616.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:36.578Z,1513250616.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:36.959Z,1513250616.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:36.978Z,1513250616.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:37.365Z,1513250617.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:37.379Z,1513250617.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:37.745Z,1513250617.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:37.796Z,1513250617.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:38.140Z,1513250618.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:38.166Z,1513250618.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:38.591Z,1513250618.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:38.684Z,1513250618.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:38.948Z,1513250618.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:38.974Z,1513250618.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:39.363Z,1513250619.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:39.378Z,1513250619.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:39.767Z,1513250619.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:39.787Z,1513250619.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:40.167Z,1513250620.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:40.187Z,1513250620.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:40.552Z,1513250620.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:40.567Z,1513250620.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:40.966Z,1513250620.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:40.988Z,1513250620.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:41.345Z,1513250621.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:41.377Z,1513250621.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:41.744Z,1513250621.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:41.760Z,1513250621.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:42.144Z,1513250622.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:42.187Z,1513250622.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:42.567Z,1513250622.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:42.594Z,1513250622.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:43.032Z,1513250623.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:43.054Z,1513250623.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:43.362Z,1513250623.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:43.391Z,1513250623.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:43.744Z,1513250623.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:43.773Z,1513250623.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:44.153Z,1513250624.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:44.214Z,1513250624.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:44.550Z,1513250624.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:44.622Z,1513250624.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:44.972Z,1513250624.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:45.008Z,1513250625.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:45.358Z,1513250625.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:45.414Z,1513250625.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:45.765Z,1513250625.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:45.780Z,1513250625.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:46.163Z,1513250626.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:46.208Z,1513250626.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:46.546Z,1513250626.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:46.575Z,1513250626.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:46.953Z,1513250626.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:46.968Z,1513250626.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:47.348Z,1513250627.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:47.362Z,1513250627.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:47.751Z,1513250627.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:47.771Z,1513250627.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:48.176Z,1513250628.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:48.223Z,1513250628.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:48.549Z,1513250628.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:48.564Z,1513250628.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:48.954Z,1513250628.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:48.990Z,1513250628.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:49.362Z,1513250629.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:49.392Z,1513250629.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:49.744Z,1513250629.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:49.758Z,1513250629.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:50.143Z,1513250630.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:50.163Z,1513250630.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:50.550Z,1513250630.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:50.571Z,1513250630.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:50.945Z,1513250630.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:50.960Z,1513250630.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:51.355Z,1513250631.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:51.371Z,1513250631.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:51.762Z,1513250631.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:51.779Z,1513250631.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:52.162Z,1513250632.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:52.177Z,1513250632.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:52.536Z,1513250632.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:52.570Z,1513250632.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:52.951Z,1513250632.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:52.976Z,1513250632.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:53.347Z,1513250633.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:53.373Z,1513250633.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:53.741Z,1513250633.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:53.771Z,1513250633.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:54.141Z,1513250634.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:54.177Z,1513250634.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:54.575Z,1513250634.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:54.702Z,1513250634.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:54.959Z,1513250634.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:54.978Z,1513250634.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:55.359Z,1513250635.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:55.379Z,1513250635.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:55.743Z,1513250635.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:55.769Z,1513250635.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:56.144Z,1513250636.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:56.170Z,1513250636.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:56.539Z,1513250636.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:56.576Z,1513250636.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:56.947Z,1513250636.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:56.973Z,1513250636.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:57.358Z,1513250637.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:57.373Z,1513250637.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:57.762Z,1513250637.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:57.776Z,1513250637.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:58.167Z,1513250638.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:58.181Z,1513250638.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:58.539Z,1513250638.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:58.575Z,1513250638.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:58.939Z,1513250638.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:58.975Z,1513250638.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:59.343Z,1513250639.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:59.375Z,1513250639.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:23:59.744Z,1513250639.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:23:59.778Z,1513250639.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:00.138Z,1513250640.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:00.174Z,1513250640.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:00.568Z,1513250640.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:00.582Z,1513250640.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:00.954Z,1513250640.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:01.012Z,1513250641.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:01.362Z,1513250641.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:01.386Z,1513250641.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:01.747Z,1513250641.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:01.762Z,1513250641.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:02.145Z,1513250642.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:02.160Z,1513250642.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:02.550Z,1513250642.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:02.564Z,1513250642.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:02.951Z,1513250642.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:02.987Z,1513250642.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:03.358Z,1513250643.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:03.392Z,1513250643.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:03.756Z,1513250643.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:03.790Z,1513250643.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:04.184Z,1513250644.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:04.211Z,1513250644.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:04.555Z,1513250644.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:04.575Z,1513250644.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:04.984Z,1513250644.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:05.098Z,1513250645.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:05.098Z,1513250645.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 217
2017-12-14T11:24:05.098Z,1513250645.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:24:05.100Z,1513250645.100 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:05.100Z,1513250645.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 217
2017-12-14T11:24:05.100Z,1513250645.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:24:05.102Z,1513250645.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:05.102Z,1513250645.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 217
2017-12-14T11:24:05.102Z,1513250645.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:24:05.114Z,1513250645.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:24:05.114Z,1513250645.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:24:05.114Z,1513250645.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:24:05.343Z,1513250645.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:05.384Z,1513250645.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:24:05.384Z,1513250645.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 217
2017-12-14T11:24:05.385Z,1513250645.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:24:05.385Z,1513250645.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 217
2017-12-14T11:24:05.385Z,1513250645.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:24:05.385Z,1513250645.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 217
2017-12-14T11:24:05.742Z,1513250645.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:05.764Z,1513250645.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:24:05.766Z,1513250645.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:24:05.766Z,1513250645.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:24:05.767Z,1513250645.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:24:05.767Z,1513250645.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:24:05.767Z,1513250645.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:24:05.768Z,1513250645.768 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:24:05.768Z,1513250645.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:24:05.768Z,1513250645.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:24:06.139Z,1513250646.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:06.175Z,1513250646.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:06.567Z,1513250646.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:06.690Z,1513250646.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:06.976Z,1513250646.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:06.991Z,1513250646.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:07.350Z,1513250647.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:07.383Z,1513250647.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:07.744Z,1513250647.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:07.791Z,1513250647.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:08.147Z,1513250648.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:08.183Z,1513250648.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:08.545Z,1513250648.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:08.589Z,1513250648.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:08.957Z,1513250648.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:08.972Z,1513250648.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:09.358Z,1513250649.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:09.372Z,1513250649.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:09.758Z,1513250649.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:09.772Z,1513250649.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:10.159Z,1513250650.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:10.174Z,1513250650.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:10.570Z,1513250650.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:10.606Z,1513250650.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:10.939Z,1513250650.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:10.964Z,1513250650.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:11.339Z,1513250651.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:11.376Z,1513250651.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:11.742Z,1513250651.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:11.775Z,1513250651.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:15.248Z,1513250655.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:15.272Z,1513250655.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:15.383Z,1513250655.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:15.419Z,1513250655.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:15.741Z,1513250655.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:15.774Z,1513250655.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:16.142Z,1513250656.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:16.172Z,1513250656.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:16.529Z,1513250656.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:16.543Z,1513250656.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:16.927Z,1513250656.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:16.983Z,1513250656.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:17.335Z,1513250657.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:17.349Z,1513250657.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:17.746Z,1513250657.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:17.774Z,1513250657.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:18.130Z,1513250658.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:18.144Z,1513250658.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:18.550Z,1513250658.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:18.581Z,1513250658.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:18.934Z,1513250658.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:18.963Z,1513250658.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:19.343Z,1513250659.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:19.358Z,1513250659.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:19.732Z,1513250659.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:19.747Z,1513250659.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:20.126Z,1513250660.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:20.155Z,1513250660.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:20.533Z,1513250660.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:20.548Z,1513250660.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:20.942Z,1513250660.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:20.957Z,1513250660.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:21.346Z,1513250661.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:21.364Z,1513250661.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:21.739Z,1513250661.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:21.754Z,1513250661.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:22.141Z,1513250662.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:22.157Z,1513250662.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:22.519Z,1513250662.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:22.550Z,1513250662.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:22.940Z,1513250662.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:22.964Z,1513250662.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:23.333Z,1513250663.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:23.347Z,1513250663.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:23.732Z,1513250663.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:23.746Z,1513250663.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:24.119Z,1513250664.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:24.151Z,1513250664.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:24.542Z,1513250664.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:24.558Z,1513250664.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:24.945Z,1513250664.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:24.960Z,1513250664.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:25.345Z,1513250665.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:25.360Z,1513250665.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:25.720Z,1513250665.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:25.748Z,1513250665.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:26.134Z,1513250666.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:26.149Z,1513250666.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:26.519Z,1513250666.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:26.547Z,1513250666.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:26.934Z,1513250666.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:26.968Z,1513250666.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:27.338Z,1513250667.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:27.353Z,1513250667.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:27.740Z,1513250667.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:27.774Z,1513250667.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:28.143Z,1513250668.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:28.163Z,1513250668.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:28.532Z,1513250668.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:28.555Z,1513250668.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:28.922Z,1513250668.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:28.979Z,1513250668.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:29.332Z,1513250669.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:29.364Z,1513250669.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:29.724Z,1513250669.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:29.749Z,1513250669.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:30.142Z,1513250670.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:30.170Z,1513250670.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:30.551Z,1513250670.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:30.604Z,1513250670.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:30.947Z,1513250670.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:30.962Z,1513250670.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:31.330Z,1513250671.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:31.379Z,1513250671.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:31.723Z,1513250671.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:31.763Z,1513250671.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:32.123Z,1513250672.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:32.158Z,1513250672.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:32.520Z,1513250672.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:32.560Z,1513250672.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:32.921Z,1513250672.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:32.936Z,1513250672.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:33.338Z,1513250673.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:33.360Z,1513250673.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:33.734Z,1513250673.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:33.763Z,1513250673.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:34.125Z,1513250674.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:34.158Z,1513250674.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:34.527Z,1513250674.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:34.563Z,1513250674.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:34.935Z,1513250674.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:34.964Z,1513250674.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:35.320Z,1513250675.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:35.334Z,1513250675.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:35.724Z,1513250675.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:35.743Z,1513250675.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:36.127Z,1513250676.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:36.147Z,1513250676.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:36.577Z,1513250676.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:36.612Z,1513250676.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:36.939Z,1513250676.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:36.958Z,1513250676.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:37.339Z,1513250677.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:37.353Z,1513250677.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:37.720Z,1513250677.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:37.751Z,1513250677.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:38.124Z,1513250678.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:38.150Z,1513250678.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:38.542Z,1513250678.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:38.563Z,1513250678.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:38.920Z,1513250678.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:38.951Z,1513250678.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:39.342Z,1513250679.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:39.356Z,1513250679.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:39.742Z,1513250679.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:39.793Z,1513250679.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:40.144Z,1513250680.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:40.163Z,1513250680.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:40.520Z,1513250680.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:40.551Z,1513250680.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:40.923Z,1513250680.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:40.956Z,1513250680.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:41.323Z,1513250681.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:41.337Z,1513250681.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:41.724Z,1513250681.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:41.759Z,1513250681.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:42.127Z,1513250682.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:42.142Z,1513250682.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:42.533Z,1513250682.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:42.562Z,1513250682.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:42.958Z,1513250682.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:42.985Z,1513250682.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:43.353Z,1513250683.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:43.368Z,1513250683.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:43.724Z,1513250683.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:43.738Z,1513250683.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:44.127Z,1513250684.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:44.142Z,1513250684.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:44.530Z,1513250684.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:44.545Z,1513250684.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:44.925Z,1513250684.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:44.940Z,1513250684.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:45.337Z,1513250685.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:45.352Z,1513250685.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:45.734Z,1513250685.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:45.749Z,1513250685.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:46.161Z,1513250686.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:46.233Z,1513250686.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:46.527Z,1513250686.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:46.547Z,1513250686.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:46.927Z,1513250686.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:46.951Z,1513250686.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:47.329Z,1513250687.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:47.344Z,1513250687.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:47.729Z,1513250687.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:47.744Z,1513250687.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:48.126Z,1513250688.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:48.142Z,1513250688.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:48.533Z,1513250688.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:48.555Z,1513250688.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:48.933Z,1513250688.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:48.948Z,1513250688.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:49.350Z,1513250689.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:49.378Z,1513250689.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:49.730Z,1513250689.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:49.745Z,1513250689.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:50.133Z,1513250690.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:50.149Z,1513250690.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:50.557Z,1513250690.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:50.583Z,1513250690.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:50.919Z,1513250690.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:50.950Z,1513250690.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:51.342Z,1513250691.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:51.357Z,1513250691.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:51.747Z,1513250691.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:51.807Z,1513250691.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:52.133Z,1513250692.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:52.214Z,1513250692.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:52.522Z,1513250692.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:52.551Z,1513250692.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:52.919Z,1513250692.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:52.946Z,1513250692.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:53.341Z,1513250693.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:53.394Z,1513250693.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:53.718Z,1513250693.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:53.745Z,1513250693.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:54.121Z,1513250694.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:54.187Z,1513250694.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:54.545Z,1513250694.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:54.559Z,1513250694.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:54.944Z,1513250694.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:54.967Z,1513250694.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:55.344Z,1513250695.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:55.359Z,1513250695.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:55.758Z,1513250695.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:55.804Z,1513250695.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:56.119Z,1513250696.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:56.147Z,1513250696.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:56.543Z,1513250696.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:56.558Z,1513250696.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:56.938Z,1513250696.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:56.952Z,1513250696.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:57.334Z,1513250697.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:57.359Z,1513250697.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:57.748Z,1513250697.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:57.764Z,1513250697.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:58.143Z,1513250698.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:58.159Z,1513250698.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:58.519Z,1513250698.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:58.556Z,1513250698.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:58.971Z,1513250698.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:59.004Z,1513250699.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:59.346Z,1513250699.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:59.362Z,1513250699.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:24:59.720Z,1513250699.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:24:59.753Z,1513250699.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:00.123Z,1513250700.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:00.164Z,1513250700.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:00.533Z,1513250700.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:00.561Z,1513250700.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:00.938Z,1513250700.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:00.962Z,1513250700.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:01.338Z,1513250701.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:01.362Z,1513250701.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:01.728Z,1513250701.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:01.742Z,1513250701.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:02.116Z,1513250702.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:02.183Z,1513250702.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:02.530Z,1513250702.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:02.583Z,1513250702.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:02.922Z,1513250702.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:02.956Z,1513250702.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:03.334Z,1513250703.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:03.349Z,1513250703.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:03.737Z,1513250703.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:03.776Z,1513250703.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:04.138Z,1513250704.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:04.152Z,1513250704.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:04.530Z,1513250704.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:04.546Z,1513250704.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:04.928Z,1513250704.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:04.947Z,1513250704.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:05.378Z,1513250705.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:05.400Z,1513250705.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:05.729Z,1513250705.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:05.744Z,1513250705.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:06.133Z,1513250706.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:06.148Z,1513250706.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:06.538Z,1513250706.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:06.555Z,1513250706.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:06.936Z,1513250706.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:06.952Z,1513250706.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:07.336Z,1513250707.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:07.351Z,1513250707.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:07.732Z,1513250707.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:07.746Z,1513250707.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:08.120Z,1513250708.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:08.143Z,1513250708.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:08.566Z,1513250708.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:08.589Z,1513250708.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:08.929Z,1513250708.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:08.951Z,1513250708.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:09.337Z,1513250709.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:09.353Z,1513250709.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:09.740Z,1513250709.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:09.755Z,1513250709.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:10.141Z,1513250710.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:10.157Z,1513250710.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:10.529Z,1513250710.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:10.544Z,1513250710.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:10.931Z,1513250710.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:10.951Z,1513250710.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:11.326Z,1513250711.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:11.348Z,1513250711.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:11.720Z,1513250711.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:11.887Z,1513250711.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:12.120Z,1513250712.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:12.146Z,1513250712.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:15.558Z,1513250715.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:15.635Z,1513250715.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:15.749Z,1513250715.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:15.794Z,1513250715.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:16.113Z,1513250716.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:16.167Z,1513250716.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:16.511Z,1513250716.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:16.525Z,1513250716.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:16.910Z,1513250716.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:16.959Z,1513250716.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:17.312Z,1513250717.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:17.326Z,1513250717.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:17.708Z,1513250717.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:17.723Z,1513250717.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:18.106Z,1513250718.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:18.120Z,1513250718.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:18.513Z,1513250718.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:18.535Z,1513250718.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:18.914Z,1513250718.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:18.935Z,1513250718.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:19.314Z,1513250719.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:19.328Z,1513250719.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:19.709Z,1513250719.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:19.723Z,1513250719.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:20.105Z,1513250720.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:20.120Z,1513250720.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:20.508Z,1513250720.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:20.522Z,1513250720.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:20.908Z,1513250720.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:20.935Z,1513250720.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:21.355Z,1513250721.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:21.383Z,1513250721.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:21.725Z,1513250721.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:21.740Z,1513250721.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:22.123Z,1513250722.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:22.138Z,1513250722.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:22.499Z,1513250722.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:22.536Z,1513250722.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:22.912Z,1513250722.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:22.927Z,1513250722.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:23.299Z,1513250723.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:23.330Z,1513250723.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:23.700Z,1513250723.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:23.732Z,1513250723.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:24.100Z,1513250724.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:24.127Z,1513250724.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:24.552Z,1513250724.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:24.585Z,1513250724.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:24.923Z,1513250724.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:24.939Z,1513250724.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:25.322Z,1513250725.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:25.383Z,1513250725.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:25.715Z,1513250725.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:25.743Z,1513250725.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:26.107Z,1513250726.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:26.138Z,1513250726.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:26.526Z,1513250726.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:26.540Z,1513250726.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:26.911Z,1513250726.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:26.943Z,1513250726.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:27.323Z,1513250727.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:27.339Z,1513250727.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:27.743Z,1513250727.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:27.763Z,1513250727.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:28.117Z,1513250728.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:28.139Z,1513250728.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:28.509Z,1513250728.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:28.535Z,1513250728.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:28.908Z,1513250728.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:28.923Z,1513250728.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:29.304Z,1513250729.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:29.339Z,1513250729.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:29.713Z,1513250729.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:29.728Z,1513250729.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:30.097Z,1513250730.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:30.131Z,1513250730.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:30.526Z,1513250730.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:30.541Z,1513250730.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:30.944Z,1513250730.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:30.994Z,1513250730.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:31.320Z,1513250731.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:31.334Z,1513250731.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:31.701Z,1513250731.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:31.731Z,1513250731.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:32.099Z,1513250732.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:32.135Z,1513250732.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:32.504Z,1513250732.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:32.536Z,1513250732.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:32.921Z,1513250732.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:32.936Z,1513250732.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:33.325Z,1513250733.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:33.340Z,1513250733.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:33.728Z,1513250733.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:33.743Z,1513250733.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:34.138Z,1513250734.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:34.189Z,1513250734.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:34.506Z,1513250734.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:34.523Z,1513250734.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:34.906Z,1513250734.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:34.924Z,1513250734.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:35.306Z,1513250735.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:35.330Z,1513250735.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:35.713Z,1513250735.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:35.728Z,1513250735.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:36.112Z,1513250736.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:36.127Z,1513250736.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:36.513Z,1513250736.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:36.528Z,1513250736.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:36.914Z,1513250736.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:36.929Z,1513250736.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:37.314Z,1513250737.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:37.410Z,1513250737.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:37.699Z,1513250737.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:37.734Z,1513250737.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:38.099Z,1513250738.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:38.143Z,1513250738.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:38.500Z,1513250738.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:38.535Z,1513250738.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:38.899Z,1513250738.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:38.939Z,1513250738.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:39.322Z,1513250739.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:39.341Z,1513250739.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:39.725Z,1513250739.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:39.853Z,1513250739.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:40.121Z,1513250740.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:40.136Z,1513250740.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:40.499Z,1513250740.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:40.538Z,1513250740.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:40.899Z,1513250740.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:40.935Z,1513250740.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:41.303Z,1513250741.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:41.339Z,1513250741.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:41.707Z,1513250741.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:41.723Z,1513250741.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:42.097Z,1513250742.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:42.111Z,1513250742.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:42.517Z,1513250742.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:42.541Z,1513250742.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:42.917Z,1513250742.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:42.947Z,1513250742.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:43.306Z,1513250743.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:43.320Z,1513250743.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:43.718Z,1513250743.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:43.753Z,1513250743.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:44.106Z,1513250744.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:44.120Z,1513250744.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:44.510Z,1513250744.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:44.524Z,1513250744.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:44.907Z,1513250744.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:44.996Z,1513250744.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:45.321Z,1513250745.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:45.353Z,1513250745.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:45.709Z,1513250745.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:45.724Z,1513250745.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:46.110Z,1513250746.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:46.125Z,1513250746.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:46.507Z,1513250746.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:46.521Z,1513250746.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:46.923Z,1513250746.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:46.960Z,1513250746.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:47.317Z,1513250747.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:47.370Z,1513250747.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:47.710Z,1513250747.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:47.725Z,1513250747.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:48.111Z,1513250748.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:48.126Z,1513250748.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:48.512Z,1513250748.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:48.528Z,1513250748.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:48.913Z,1513250748.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:48.936Z,1513250748.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:49.314Z,1513250749.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:49.328Z,1513250749.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:49.708Z,1513250749.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:49.727Z,1513250749.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:50.150Z,1513250750.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:50.179Z,1513250750.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:50.508Z,1513250750.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:50.531Z,1513250750.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:50.923Z,1513250750.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:51.029Z,1513250751.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:51.317Z,1513250751.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:51.332Z,1513250751.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:51.717Z,1513250751.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:51.732Z,1513250751.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:52.112Z,1513250752.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:52.139Z,1513250752.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:52.509Z,1513250752.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:52.523Z,1513250752.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:52.903Z,1513250752.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:52.935Z,1513250752.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:53.307Z,1513250753.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:53.324Z,1513250753.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:53.699Z,1513250753.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:53.734Z,1513250753.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:54.111Z,1513250754.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:54.126Z,1513250754.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:54.526Z,1513250754.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:54.543Z,1513250754.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:54.924Z,1513250754.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:54.938Z,1513250754.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:55.314Z,1513250755.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:55.345Z,1513250755.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:55.699Z,1513250755.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:55.730Z,1513250755.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:56.099Z,1513250756.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:56.125Z,1513250756.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:56.535Z,1513250756.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:56.579Z,1513250756.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:56.899Z,1513250756.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:56.927Z,1513250756.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:57.320Z,1513250757.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:57.341Z,1513250757.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:57.722Z,1513250757.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:57.738Z,1513250757.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:58.118Z,1513250758.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:58.175Z,1513250758.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:58.499Z,1513250758.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:58.530Z,1513250758.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:58.900Z,1513250758.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:58.935Z,1513250758.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:59.299Z,1513250759.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:59.359Z,1513250759.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:25:59.735Z,1513250759.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:25:59.749Z,1513250759.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:00.104Z,1513250760.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:00.131Z,1513250760.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:00.521Z,1513250760.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:00.578Z,1513250760.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:00.925Z,1513250760.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:00.939Z,1513250760.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:01.314Z,1513250761.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:01.364Z,1513250761.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:01.707Z,1513250761.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:01.722Z,1513250761.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:02.109Z,1513250762.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:02.123Z,1513250762.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:02.500Z,1513250762.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:02.519Z,1513250762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:02.906Z,1513250762.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:02.933Z,1513250762.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:03.309Z,1513250763.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:03.331Z,1513250763.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:03.715Z,1513250763.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:03.778Z,1513250763.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:04.113Z,1513250764.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:04.129Z,1513250764.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:04.499Z,1513250764.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:04.513Z,1513250764.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:04.912Z,1513250764.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:04.939Z,1513250764.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:05.310Z,1513250765.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:05.325Z,1513250765.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:05.710Z,1513250765.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:05.724Z,1513250765.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:06.120Z,1513250766.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:06.160Z,1513250766.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:06.522Z,1513250766.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:06.553Z,1513250766.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:06.914Z,1513250766.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:06.928Z,1513250766.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:07.318Z,1513250767.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:07.332Z,1513250767.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:07.706Z,1513250767.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:07.728Z,1513250767.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:08.114Z,1513250768.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:08.128Z,1513250768.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:08.510Z,1513250768.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:08.526Z,1513250768.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:08.903Z,1513250768.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:08.935Z,1513250768.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:09.327Z,1513250769.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:09.347Z,1513250769.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:09.724Z,1513250769.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:09.772Z,1513250769.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:10.124Z,1513250770.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:10.162Z,1513250770.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:10.499Z,1513250770.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:10.530Z,1513250770.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:10.914Z,1513250770.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:10.930Z,1513250770.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:11.311Z,1513250771.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:11.327Z,1513250771.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:11.700Z,1513250771.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:11.736Z,1513250771.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:11.740Z,1513250771.740 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:21:11.5Z
2017-12-14T11:26:11.740Z,1513250771.740 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:26:11.740Z,1513250771.740 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:26:12.098Z,1513250772.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:12.134Z,1513250772.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:12.989Z,1513250772.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:13.022Z,1513250773.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:16.575Z,1513250776.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:16.599Z,1513250776.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:16.692Z,1513250776.692 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0252.lzma
2017-12-14T11:26:16.738Z,1513250776.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:16.769Z,1513250776.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:17.080Z,1513250777.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:17.095Z,1513250777.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:17.452Z,1513250777.452 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0252.lzma.bak
2017-12-14T11:26:17.452Z,1513250777.452 [DataOverHttps](INFO): SBD MOMSN=5438649
2017-12-14T11:26:17.501Z,1513250777.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:17.537Z,1513250777.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:19.236Z,1513250779.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:19.289Z,1513250779.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:19.404Z,1513250779.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:19.444Z,1513250779.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:25.922Z,1513250785.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:25.973Z,1513250785.973 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:26:25.973Z,1513250785.973 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:26:25.973Z,1513250785.973 [BPC1](ERROR): Communications Fault
2017-12-14T11:26:25.995Z,1513250785.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:26.049Z,1513250786.049 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:26:26.146Z,1513250786.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:26.219Z,1513250786.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:26.491Z,1513250786.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:26.523Z,1513250786.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:26.903Z,1513250786.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:26.924Z,1513250786.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:26.986Z,1513250786.986 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:26:26.986Z,1513250786.986 [BPC1] No Fault, FailCount= 1
2017-12-14T11:26:27.287Z,1513250787.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:27.409Z,1513250787.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:27.684Z,1513250787.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:27.740Z,1513250787.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:31.698Z,1513250791.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:31.741Z,1513250791.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:31.801Z,1513250791.801 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0253.lzma
2017-12-14T11:26:31.845Z,1513250791.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:31.868Z,1513250791.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:32.207Z,1513250792.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:32.273Z,1513250792.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:32.567Z,1513250792.567 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0253.lzma.bak
2017-12-14T11:26:32.568Z,1513250792.568 [DataOverHttps](INFO): SBD MOMSN=5438651
2017-12-14T11:26:32.615Z,1513250792.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:32.671Z,1513250792.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:36.179Z,1513250796.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:36.259Z,1513250796.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:36.263Z,1513250796.263 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:26:36.263Z,1513250796.263 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:26:36.263Z,1513250796.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:26:36.448Z,1513250796.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:36.467Z,1513250796.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:43.203Z,1513250803.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:43.251Z,1513250803.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:43.403Z,1513250803.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:43.447Z,1513250803.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:43.807Z,1513250803.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:43.854Z,1513250803.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:44.170Z,1513250804.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:44.210Z,1513250804.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:44.566Z,1513250804.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:44.605Z,1513250804.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:44.991Z,1513250804.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:45.014Z,1513250805.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:45.384Z,1513250805.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:45.419Z,1513250805.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:45.788Z,1513250805.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:45.823Z,1513250805.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:46.188Z,1513250806.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:46.215Z,1513250806.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:46.591Z,1513250806.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:46.639Z,1513250806.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:46.974Z,1513250806.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:46.997Z,1513250806.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:47.364Z,1513250807.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:47.451Z,1513250807.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:47.770Z,1513250807.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:47.815Z,1513250807.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:48.175Z,1513250808.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:48.196Z,1513250808.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:48.588Z,1513250808.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:48.684Z,1513250808.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:48.993Z,1513250808.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:49.024Z,1513250809.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:49.382Z,1513250809.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:49.437Z,1513250809.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:49.773Z,1513250809.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:49.816Z,1513250809.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:50.171Z,1513250810.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:50.186Z,1513250810.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:50.626Z,1513250810.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:50.664Z,1513250810.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:50.975Z,1513250810.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:50.995Z,1513250810.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:51.386Z,1513250811.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:51.419Z,1513250811.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:51.782Z,1513250811.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:51.797Z,1513250811.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:52.178Z,1513250812.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:52.192Z,1513250812.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:52.574Z,1513250812.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:52.590Z,1513250812.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:52.972Z,1513250812.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:52.988Z,1513250812.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:53.377Z,1513250813.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:53.391Z,1513250813.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:53.774Z,1513250813.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:53.788Z,1513250813.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:54.179Z,1513250814.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:54.194Z,1513250814.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:54.582Z,1513250814.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:54.599Z,1513250814.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:54.985Z,1513250814.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:55.027Z,1513250815.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:55.387Z,1513250815.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:55.402Z,1513250815.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:55.763Z,1513250815.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:55.800Z,1513250815.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:56.163Z,1513250816.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:56.195Z,1513250816.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:56.564Z,1513250816.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:56.604Z,1513250816.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:56.963Z,1513250816.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:56.995Z,1513250816.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:57.384Z,1513250817.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:57.403Z,1513250817.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:57.783Z,1513250817.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:57.844Z,1513250817.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:58.186Z,1513250818.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:58.201Z,1513250818.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:58.564Z,1513250818.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:58.599Z,1513250818.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:58.963Z,1513250818.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:58.995Z,1513250818.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:59.381Z,1513250819.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:59.448Z,1513250819.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:26:59.774Z,1513250819.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:26:59.788Z,1513250819.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:00.171Z,1513250820.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:00.186Z,1513250820.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:00.585Z,1513250820.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:00.600Z,1513250820.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:00.986Z,1513250820.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:01.000Z,1513250821.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:01.380Z,1513250821.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:01.396Z,1513250821.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:01.774Z,1513250821.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:01.789Z,1513250821.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:02.202Z,1513250822.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:02.255Z,1513250822.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:02.564Z,1513250822.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:02.590Z,1513250822.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:02.979Z,1513250822.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:02.997Z,1513250822.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:03.387Z,1513250823.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:03.402Z,1513250823.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:03.789Z,1513250823.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:03.811Z,1513250823.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:04.176Z,1513250824.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:04.195Z,1513250824.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:04.563Z,1513250824.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:04.595Z,1513250824.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:04.963Z,1513250824.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:04.995Z,1513250824.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:05.368Z,1513250825.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:05.395Z,1513250825.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:05.764Z,1513250825.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:05.804Z,1513250825.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:05.804Z,1513250825.804 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 218
2017-12-14T11:27:05.804Z,1513250825.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:27:05.806Z,1513250825.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:05.806Z,1513250825.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 218
2017-12-14T11:27:05.806Z,1513250825.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:27:05.808Z,1513250825.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:05.808Z,1513250825.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 218
2017-12-14T11:27:05.808Z,1513250825.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:27:05.820Z,1513250825.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:27:05.820Z,1513250825.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:27:05.820Z,1513250825.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:27:06.163Z,1513250826.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:06.218Z,1513250826.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:27:06.218Z,1513250826.218 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 218
2017-12-14T11:27:06.218Z,1513250826.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:27:06.218Z,1513250826.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 218
2017-12-14T11:27:06.219Z,1513250826.219 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:27:06.219Z,1513250826.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 218
2017-12-14T11:27:06.573Z,1513250826.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:06.601Z,1513250826.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:27:06.601Z,1513250826.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:27:06.601Z,1513250826.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:27:06.602Z,1513250826.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:27:06.602Z,1513250826.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:27:06.603Z,1513250826.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:27:06.603Z,1513250826.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:27:06.603Z,1513250826.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:27:06.604Z,1513250826.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:27:06.981Z,1513250826.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:07.011Z,1513250827.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:07.378Z,1513250827.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:07.412Z,1513250827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:07.775Z,1513250827.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:07.811Z,1513250827.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:08.171Z,1513250828.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:08.187Z,1513250828.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:08.583Z,1513250828.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:08.720Z,1513250828.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:08.970Z,1513250828.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:08.993Z,1513250828.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:09.378Z,1513250829.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:09.392Z,1513250829.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:09.778Z,1513250829.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:09.850Z,1513250829.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:10.181Z,1513250830.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:10.195Z,1513250830.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:10.572Z,1513250830.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:10.588Z,1513250830.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:10.967Z,1513250830.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:11.022Z,1513250831.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:11.375Z,1513250831.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:11.395Z,1513250831.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:11.778Z,1513250831.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:11.829Z,1513250831.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:12.184Z,1513250832.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:12.199Z,1513250832.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:12.584Z,1513250832.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:12.603Z,1513250832.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:12.987Z,1513250832.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:13.007Z,1513250833.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:13.385Z,1513250833.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:13.399Z,1513250833.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:13.763Z,1513250833.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:13.789Z,1513250833.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:14.163Z,1513250834.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:14.190Z,1513250834.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:14.579Z,1513250834.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:14.593Z,1513250834.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:14.966Z,1513250834.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:15.016Z,1513250835.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:15.372Z,1513250835.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:15.400Z,1513250835.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:15.786Z,1513250835.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:15.802Z,1513250835.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:16.173Z,1513250836.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:16.207Z,1513250836.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:16.573Z,1513250836.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:16.587Z,1513250836.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:16.970Z,1513250836.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:16.989Z,1513250836.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:17.377Z,1513250837.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:17.413Z,1513250837.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:17.772Z,1513250837.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:17.788Z,1513250837.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:18.188Z,1513250838.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:18.219Z,1513250838.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:18.583Z,1513250838.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:18.597Z,1513250838.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:18.983Z,1513250838.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:19.011Z,1513250839.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:19.394Z,1513250839.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:19.409Z,1513250839.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:19.768Z,1513250839.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:19.794Z,1513250839.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:20.188Z,1513250840.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:20.235Z,1513250840.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:20.588Z,1513250840.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:20.604Z,1513250840.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:20.963Z,1513250840.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:20.995Z,1513250840.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:21.386Z,1513250841.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:21.408Z,1513250841.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:21.791Z,1513250841.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:21.806Z,1513250841.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:22.186Z,1513250842.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:22.215Z,1513250842.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:22.564Z,1513250842.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:22.578Z,1513250842.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:22.966Z,1513250842.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:22.989Z,1513250842.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:23.376Z,1513250843.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:23.391Z,1513250843.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:23.774Z,1513250843.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:23.795Z,1513250843.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:24.176Z,1513250844.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:24.191Z,1513250844.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:24.644Z,1513250844.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:24.749Z,1513250844.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:24.981Z,1513250844.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:25.021Z,1513250845.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:25.381Z,1513250845.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:25.404Z,1513250845.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:25.777Z,1513250845.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:25.791Z,1513250845.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:26.174Z,1513250846.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:26.191Z,1513250846.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:26.585Z,1513250846.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:26.600Z,1513250846.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:26.968Z,1513250846.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:26.995Z,1513250846.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:27.391Z,1513250847.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:27.406Z,1513250847.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:27.789Z,1513250847.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:27.805Z,1513250847.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:28.183Z,1513250848.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:28.198Z,1513250848.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:28.563Z,1513250848.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:28.601Z,1513250848.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:28.986Z,1513250848.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:29.000Z,1513250849.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:29.365Z,1513250849.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:29.405Z,1513250849.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:29.768Z,1513250849.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:29.798Z,1513250849.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:30.165Z,1513250850.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:30.196Z,1513250850.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:30.575Z,1513250850.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:30.601Z,1513250850.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:31.014Z,1513250851.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:31.114Z,1513250851.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:31.395Z,1513250851.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:31.415Z,1513250851.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:31.768Z,1513250851.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:31.803Z,1513250851.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:32.163Z,1513250852.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:32.212Z,1513250852.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:32.566Z,1513250852.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:32.603Z,1513250852.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:32.976Z,1513250852.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:33.031Z,1513250853.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:33.387Z,1513250853.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:33.402Z,1513250853.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:33.786Z,1513250853.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:33.842Z,1513250853.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:34.182Z,1513250854.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:34.271Z,1513250854.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:34.570Z,1513250854.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:34.586Z,1513250854.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:34.973Z,1513250854.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:34.988Z,1513250854.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:35.369Z,1513250855.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:35.384Z,1513250855.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:35.770Z,1513250855.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:35.791Z,1513250855.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:36.160Z,1513250856.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:36.187Z,1513250856.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:36.578Z,1513250856.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:36.599Z,1513250856.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:36.990Z,1513250856.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:37.016Z,1513250857.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:40.510Z,1513250860.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:40.525Z,1513250860.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:40.621Z,1513250860.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:40.660Z,1513250860.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:41.013Z,1513250861.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:41.064Z,1513250861.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:41.396Z,1513250861.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:41.422Z,1513250861.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:41.793Z,1513250861.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:41.818Z,1513250861.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:42.188Z,1513250862.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:42.259Z,1513250862.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:42.605Z,1513250862.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:42.627Z,1513250862.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:43.009Z,1513250863.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:43.039Z,1513250863.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:43.418Z,1513250863.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:43.436Z,1513250863.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:43.791Z,1513250863.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:43.814Z,1513250863.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:44.197Z,1513250864.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:44.229Z,1513250864.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:44.592Z,1513250864.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:44.629Z,1513250864.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:44.991Z,1513250864.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:45.022Z,1513250865.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:45.414Z,1513250865.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:45.436Z,1513250865.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:45.819Z,1513250865.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:45.833Z,1513250865.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:46.211Z,1513250866.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:46.234Z,1513250866.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:46.591Z,1513250866.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:46.639Z,1513250866.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:47.038Z,1513250867.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:47.083Z,1513250867.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:47.391Z,1513250867.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:47.432Z,1513250867.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:47.792Z,1513250867.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:47.806Z,1513250867.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:48.188Z,1513250868.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:48.203Z,1513250868.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:48.609Z,1513250868.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:48.649Z,1513250868.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:49.013Z,1513250869.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:49.043Z,1513250869.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:49.405Z,1513250869.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:49.446Z,1513250869.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:49.797Z,1513250869.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:49.811Z,1513250869.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:50.211Z,1513250870.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:50.258Z,1513250870.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:50.601Z,1513250870.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:50.698Z,1513250870.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:51.001Z,1513250871.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:51.024Z,1513250871.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:51.416Z,1513250871.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:51.441Z,1513250871.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:51.820Z,1513250871.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:51.841Z,1513250871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:52.214Z,1513250872.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:52.247Z,1513250872.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:52.595Z,1513250872.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:52.703Z,1513250872.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:52.999Z,1513250872.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:53.064Z,1513250873.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:53.422Z,1513250873.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:53.456Z,1513250873.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:53.801Z,1513250873.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:53.833Z,1513250873.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:54.196Z,1513250874.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:54.268Z,1513250874.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:54.608Z,1513250874.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:54.624Z,1513250874.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:55.012Z,1513250875.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:55.062Z,1513250875.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:55.414Z,1513250875.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:55.428Z,1513250875.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:55.799Z,1513250875.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:55.866Z,1513250875.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:56.192Z,1513250876.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:56.223Z,1513250876.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:56.620Z,1513250876.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:56.658Z,1513250876.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:56.991Z,1513250876.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:57.038Z,1513250877.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:57.413Z,1513250877.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:57.428Z,1513250877.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:57.808Z,1513250877.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:57.822Z,1513250877.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:58.215Z,1513250878.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:58.237Z,1513250878.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:58.591Z,1513250878.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:58.623Z,1513250878.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:58.991Z,1513250878.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:59.025Z,1513250879.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:59.391Z,1513250879.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:59.422Z,1513250879.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:27:59.795Z,1513250879.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:27:59.863Z,1513250879.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:00.197Z,1513250880.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:00.231Z,1513250880.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:00.618Z,1513250880.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:00.652Z,1513250880.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:01.009Z,1513250881.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:01.024Z,1513250881.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:01.409Z,1513250881.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:01.431Z,1513250881.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:01.801Z,1513250881.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:01.815Z,1513250881.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:02.196Z,1513250882.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:02.217Z,1513250882.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:02.602Z,1513250882.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:02.616Z,1513250882.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:03.018Z,1513250883.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:03.060Z,1513250883.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:03.421Z,1513250883.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:03.464Z,1513250883.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:03.810Z,1513250883.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:03.824Z,1513250883.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:04.208Z,1513250884.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:04.266Z,1513250884.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:04.604Z,1513250884.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:04.703Z,1513250884.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:05.005Z,1513250885.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:05.020Z,1513250885.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:05.405Z,1513250885.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:05.420Z,1513250885.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:05.792Z,1513250885.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:05.815Z,1513250885.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:06.231Z,1513250886.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:06.276Z,1513250886.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:06.623Z,1513250886.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:06.713Z,1513250886.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:07.017Z,1513250887.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:07.068Z,1513250887.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:07.416Z,1513250887.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:07.433Z,1513250887.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:07.796Z,1513250887.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:07.835Z,1513250887.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:08.195Z,1513250888.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:08.229Z,1513250888.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:08.602Z,1513250888.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:08.642Z,1513250888.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:08.999Z,1513250888.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:09.042Z,1513250889.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:09.450Z,1513250889.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:09.479Z,1513250889.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:09.817Z,1513250889.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:09.843Z,1513250889.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:10.211Z,1513250890.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:10.250Z,1513250890.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:10.605Z,1513250890.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:10.622Z,1513250890.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:11.002Z,1513250891.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:11.017Z,1513250891.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:11.408Z,1513250891.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:11.423Z,1513250891.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:11.796Z,1513250891.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:11.828Z,1513250891.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:12.204Z,1513250892.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:12.219Z,1513250892.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:12.631Z,1513250892.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:12.672Z,1513250892.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:13.007Z,1513250893.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:13.047Z,1513250893.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:13.407Z,1513250893.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:13.440Z,1513250893.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:13.795Z,1513250893.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:13.841Z,1513250893.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:14.199Z,1513250894.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:14.236Z,1513250894.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:14.602Z,1513250894.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:14.610Z,1513250894.610 [BPC1](ERROR): Failed to parse message.
2017-12-14T11:28:14.611Z,1513250894.611 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T11:28:14.611Z,1513250894.611 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:28:14.611Z,1513250894.611 [BPC1](ERROR): Data Fault
2017-12-14T11:28:14.619Z,1513250894.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:14.674Z,1513250894.674 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:28:14.995Z,1513250894.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:15.024Z,1513250895.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:15.408Z,1513250895.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:15.426Z,1513250895.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:15.853Z,1513250895.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:15.897Z,1513250895.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:15.934Z,1513250895.934 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:28:15.934Z,1513250895.934 [BPC1] No Fault, FailCount= 1
2017-12-14T11:28:16.209Z,1513250896.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:16.302Z,1513250896.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:16.609Z,1513250896.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:16.624Z,1513250896.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:17.001Z,1513250897.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:17.015Z,1513250897.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:17.391Z,1513250897.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:17.419Z,1513250897.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:17.804Z,1513250897.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:17.818Z,1513250897.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:18.201Z,1513250898.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:18.215Z,1513250898.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:18.606Z,1513250898.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:18.692Z,1513250898.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:19.051Z,1513250899.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:19.076Z,1513250899.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:19.416Z,1513250899.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:19.447Z,1513250899.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:19.793Z,1513250899.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:19.839Z,1513250899.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:20.195Z,1513250900.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:20.229Z,1513250900.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:20.596Z,1513250900.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:20.610Z,1513250900.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:20.994Z,1513250900.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:21.013Z,1513250901.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:21.417Z,1513250901.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:21.432Z,1513250901.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:21.810Z,1513250901.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:21.824Z,1513250901.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:22.208Z,1513250902.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:22.267Z,1513250902.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:22.591Z,1513250902.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:22.631Z,1513250902.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:22.991Z,1513250902.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:23.033Z,1513250903.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:23.386Z,1513250903.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:23.401Z,1513250903.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:23.800Z,1513250903.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:23.833Z,1513250903.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:24.199Z,1513250904.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:24.213Z,1513250904.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:24.609Z,1513250904.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:24.655Z,1513250904.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:25.009Z,1513250905.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:25.043Z,1513250905.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:25.409Z,1513250905.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:25.449Z,1513250905.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:25.800Z,1513250905.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:25.819Z,1513250905.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:26.229Z,1513250906.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:26.260Z,1513250906.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:26.591Z,1513250906.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:26.619Z,1513250906.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:26.991Z,1513250906.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:27.031Z,1513250907.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:27.414Z,1513250907.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:27.429Z,1513250907.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:27.818Z,1513250907.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:27.832Z,1513250907.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:28.209Z,1513250908.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:28.234Z,1513250908.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:28.591Z,1513250908.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:28.655Z,1513250908.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:29.001Z,1513250909.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:29.048Z,1513250909.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:29.402Z,1513250909.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:29.467Z,1513250909.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:29.804Z,1513250909.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:29.862Z,1513250909.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:30.192Z,1513250910.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:30.219Z,1513250910.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:30.610Z,1513250910.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:30.625Z,1513250910.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:31.017Z,1513250911.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:31.075Z,1513250911.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:31.417Z,1513250911.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:31.464Z,1513250911.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:31.826Z,1513250911.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:31.915Z,1513250911.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:32.192Z,1513250912.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:32.235Z,1513250912.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:32.606Z,1513250912.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:32.704Z,1513250912.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:32.995Z,1513250912.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:33.044Z,1513250913.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:33.414Z,1513250913.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:33.436Z,1513250913.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:33.818Z,1513250913.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:33.832Z,1513250913.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:34.207Z,1513250914.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:34.227Z,1513250914.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:34.592Z,1513250914.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:34.690Z,1513250914.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:34.991Z,1513250914.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:35.074Z,1513250915.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:35.392Z,1513250915.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:35.415Z,1513250915.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:35.798Z,1513250915.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:35.817Z,1513250915.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:36.201Z,1513250916.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:36.215Z,1513250916.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:36.606Z,1513250916.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:36.626Z,1513250916.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:37.005Z,1513250917.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:37.027Z,1513250917.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:40.478Z,1513250920.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:40.554Z,1513250920.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:40.632Z,1513250920.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:40.670Z,1513250920.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:41.012Z,1513250921.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:41.046Z,1513250921.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:41.422Z,1513250921.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:41.442Z,1513250921.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:41.805Z,1513250921.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:41.843Z,1513250921.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:42.207Z,1513250922.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:42.243Z,1513250922.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:42.621Z,1513250922.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:42.653Z,1513250922.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:43.017Z,1513250923.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:43.039Z,1513250923.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:43.420Z,1513250923.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:43.468Z,1513250923.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:43.817Z,1513250923.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:43.831Z,1513250923.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:44.217Z,1513250924.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:44.244Z,1513250924.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:44.657Z,1513250924.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:44.685Z,1513250924.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:45.012Z,1513250925.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:45.043Z,1513250925.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:45.425Z,1513250925.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:45.442Z,1513250925.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:45.825Z,1513250925.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:45.848Z,1513250925.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:46.231Z,1513250926.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:46.245Z,1513250926.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:46.604Z,1513250926.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:46.708Z,1513250926.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:47.015Z,1513250927.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:47.067Z,1513250927.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:47.417Z,1513250927.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:47.443Z,1513250927.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:47.842Z,1513250927.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:47.872Z,1513250927.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:48.203Z,1513250928.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:48.247Z,1513250928.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:48.665Z,1513250928.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:48.702Z,1513250928.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:49.038Z,1513250929.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:49.067Z,1513250929.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:49.425Z,1513250929.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:49.451Z,1513250929.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:49.807Z,1513250929.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:49.844Z,1513250929.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:50.213Z,1513250930.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:50.228Z,1513250930.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:50.627Z,1513250930.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:50.650Z,1513250930.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:51.032Z,1513250931.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:51.087Z,1513250931.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:51.428Z,1513250931.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:51.491Z,1513250931.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:51.831Z,1513250931.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:51.854Z,1513250931.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:52.226Z,1513250932.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:52.259Z,1513250932.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:52.612Z,1513250932.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:52.679Z,1513250932.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:53.022Z,1513250933.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:53.074Z,1513250933.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:53.404Z,1513250933.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:53.456Z,1513250933.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:53.819Z,1513250933.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:53.843Z,1513250933.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:54.240Z,1513250934.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:54.369Z,1513250934.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:54.618Z,1513250934.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:54.664Z,1513250934.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:55.018Z,1513250935.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:55.039Z,1513250935.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:55.421Z,1513250935.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:55.444Z,1513250935.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:55.816Z,1513250935.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:55.838Z,1513250935.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:56.204Z,1513250936.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:56.227Z,1513250936.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:56.630Z,1513250936.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:56.653Z,1513250936.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:57.007Z,1513250937.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:57.047Z,1513250937.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:57.417Z,1513250937.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:57.453Z,1513250937.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:57.825Z,1513250937.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:57.871Z,1513250937.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:58.221Z,1513250938.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:58.255Z,1513250938.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:58.610Z,1513250938.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:58.642Z,1513250938.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:59.007Z,1513250939.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:59.046Z,1513250939.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:59.403Z,1513250939.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:59.428Z,1513250939.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:28:59.816Z,1513250939.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:28:59.831Z,1513250939.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:00.203Z,1513250940.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:00.262Z,1513250940.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:00.705Z,1513250940.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:00.752Z,1513250940.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:01.025Z,1513250941.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:01.067Z,1513250941.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:01.423Z,1513250941.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:01.454Z,1513250941.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:01.815Z,1513250941.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:01.860Z,1513250941.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:02.205Z,1513250942.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:02.222Z,1513250942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:02.608Z,1513250942.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:02.723Z,1513250942.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:03.013Z,1513250943.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:03.027Z,1513250943.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:03.421Z,1513250943.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:03.455Z,1513250943.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:03.836Z,1513250943.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:03.851Z,1513250943.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:04.217Z,1513250944.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:04.247Z,1513250944.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:04.609Z,1513250944.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:04.624Z,1513250944.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:05.044Z,1513250945.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:05.063Z,1513250945.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:05.403Z,1513250945.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:05.439Z,1513250945.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:05.801Z,1513250945.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:05.846Z,1513250945.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:06.216Z,1513250946.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:06.235Z,1513250946.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:06.624Z,1513250946.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:06.650Z,1513250946.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:07.035Z,1513250947.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:07.053Z,1513250947.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:07.428Z,1513250947.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:07.478Z,1513250947.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:07.803Z,1513250947.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:07.835Z,1513250947.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:08.203Z,1513250948.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:08.246Z,1513250948.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:08.614Z,1513250948.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:08.648Z,1513250948.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:09.011Z,1513250949.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:09.025Z,1513250949.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:09.426Z,1513250949.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:09.459Z,1513250949.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:09.818Z,1513250949.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:09.857Z,1513250949.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:10.217Z,1513250950.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:10.240Z,1513250950.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:10.603Z,1513250950.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:10.643Z,1513250950.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:11.016Z,1513250951.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:11.031Z,1513250951.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:11.403Z,1513250951.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:11.445Z,1513250951.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:11.809Z,1513250951.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:11.844Z,1513250951.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:12.212Z,1513250952.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:12.227Z,1513250952.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:12.630Z,1513250952.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:12.662Z,1513250952.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:13.026Z,1513250953.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:13.067Z,1513250953.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:13.430Z,1513250953.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:13.479Z,1513250953.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:13.816Z,1513250953.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:13.839Z,1513250953.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:14.232Z,1513250954.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:14.260Z,1513250954.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:14.614Z,1513250954.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:14.743Z,1513250954.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:15.012Z,1513250955.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:15.036Z,1513250955.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:15.069Z,1513250955.069 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:29:15.430Z,1513250955.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:15.476Z,1513250955.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:15.825Z,1513250955.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:15.875Z,1513250955.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:16.226Z,1513250956.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:16.248Z,1513250956.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:16.598Z,1513250956.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:16.704Z,1513250956.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:17.004Z,1513250957.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:17.039Z,1513250957.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:17.403Z,1513250957.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:17.462Z,1513250957.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:17.814Z,1513250957.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:17.828Z,1513250957.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:18.211Z,1513250958.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:18.249Z,1513250958.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:18.623Z,1513250958.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:18.637Z,1513250958.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:19.026Z,1513250959.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:19.069Z,1513250959.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:19.427Z,1513250959.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:19.449Z,1513250959.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:19.815Z,1513250959.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:19.848Z,1513250959.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:20.196Z,1513250960.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:20.231Z,1513250960.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:20.661Z,1513250960.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:20.696Z,1513250960.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:21.013Z,1513250961.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:21.051Z,1513250961.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:21.412Z,1513250961.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:21.439Z,1513250961.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:21.822Z,1513250961.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:21.843Z,1513250961.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:22.222Z,1513250962.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:22.237Z,1513250962.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:22.600Z,1513250962.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:22.615Z,1513250962.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:23.003Z,1513250963.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:23.040Z,1513250963.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:23.411Z,1513250963.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:23.448Z,1513250963.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:23.805Z,1513250963.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:23.820Z,1513250963.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:24.209Z,1513250964.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:24.223Z,1513250964.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:24.624Z,1513250964.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:24.648Z,1513250964.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:25.030Z,1513250965.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:25.090Z,1513250965.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:25.426Z,1513250965.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:25.443Z,1513250965.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:25.807Z,1513250965.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:25.841Z,1513250965.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:26.211Z,1513250966.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:26.251Z,1513250966.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:26.605Z,1513250966.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:26.646Z,1513250966.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:27.076Z,1513250967.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:27.137Z,1513250967.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:27.413Z,1513250967.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:27.448Z,1513250967.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:27.834Z,1513250967.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:27.858Z,1513250967.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:28.227Z,1513250968.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:28.256Z,1513250968.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:28.598Z,1513250968.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:28.613Z,1513250968.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:29.016Z,1513250969.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:29.057Z,1513250969.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:29.414Z,1513250969.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:29.434Z,1513250969.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:29.809Z,1513250969.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:29.824Z,1513250969.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:30.233Z,1513250970.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:30.277Z,1513250970.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:30.586Z,1513250970.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T11:29:30.587Z,1513250970.587 [NAL9602] Data Fault, FailCount= 5
2017-12-14T11:29:30.587Z,1513250970.587 [NAL9602](ERROR): Data Fault
2017-12-14T11:29:30.614Z,1513250970.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:30.722Z,1513250970.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:30.754Z,1513250970.754 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T11:29:30.754Z,1513250970.754 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T11:29:30.997Z,1513250970.997 [NAL9602](INFO): Powering down
2017-12-14T11:29:31.014Z,1513250971.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:31.067Z,1513250971.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:31.078Z,1513250971.078 [CBIT](INFO): Critical error at 20171214T112930
2017-12-14T11:29:31.411Z,1513250971.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:31.462Z,1513250971.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:31.814Z,1513250971.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:31.828Z,1513250971.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:32.216Z,1513250972.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:32.238Z,1513250972.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:32.612Z,1513250972.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:32.636Z,1513250972.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:33.021Z,1513250973.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:33.036Z,1513250973.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:33.433Z,1513250973.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:33.494Z,1513250973.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:33.810Z,1513250973.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:33.853Z,1513250973.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:34.210Z,1513250974.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:34.235Z,1513250974.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:34.611Z,1513250974.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:34.631Z,1513250974.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:35.015Z,1513250975.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:35.031Z,1513250975.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:35.416Z,1513250975.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:35.438Z,1513250975.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:35.815Z,1513250975.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:35.883Z,1513250975.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:36.206Z,1513250976.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:36.231Z,1513250976.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:36.602Z,1513250976.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:36.654Z,1513250976.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:37.010Z,1513250977.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:37.068Z,1513250977.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:40.567Z,1513250980.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:40.601Z,1513250980.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:40.690Z,1513250980.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:40.708Z,1513250980.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:41.056Z,1513250981.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:41.079Z,1513250981.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:41.466Z,1513250981.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:41.504Z,1513250981.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:41.859Z,1513250981.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:41.918Z,1513250981.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:42.256Z,1513250982.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:42.275Z,1513250982.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:42.713Z,1513250982.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:42.775Z,1513250982.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:43.062Z,1513250983.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:43.102Z,1513250983.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:43.458Z,1513250983.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:43.479Z,1513250983.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:43.858Z,1513250983.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:43.872Z,1513250983.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:44.254Z,1513250984.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:44.273Z,1513250984.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:44.711Z,1513250984.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:44.735Z,1513250984.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:45.064Z,1513250985.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:45.078Z,1513250985.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:45.454Z,1513250985.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:45.470Z,1513250985.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:45.863Z,1513250985.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:45.878Z,1513250985.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:46.347Z,1513250986.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:46.406Z,1513250986.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:46.654Z,1513250986.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:46.669Z,1513250986.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:47.054Z,1513250987.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:47.069Z,1513250987.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:47.454Z,1513250987.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:47.472Z,1513250987.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:47.851Z,1513250987.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:47.867Z,1513250987.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:48.259Z,1513250988.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:48.274Z,1513250988.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:48.654Z,1513250988.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:48.671Z,1513250988.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:49.046Z,1513250989.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:49.088Z,1513250989.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:49.455Z,1513250989.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:49.481Z,1513250989.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:49.859Z,1513250989.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:49.879Z,1513250989.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:50.254Z,1513250990.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:50.270Z,1513250990.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:50.646Z,1513250990.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:50.677Z,1513250990.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:51.053Z,1513250991.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:51.112Z,1513250991.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:51.463Z,1513250991.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:51.478Z,1513250991.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:51.847Z,1513250991.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:51.879Z,1513250991.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:52.267Z,1513250992.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:52.370Z,1513250992.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:52.691Z,1513250992.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:52.731Z,1513250992.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:53.052Z,1513250993.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:53.077Z,1513250993.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:53.450Z,1513250993.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:53.474Z,1513250993.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:53.852Z,1513250993.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:53.885Z,1513250993.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:54.264Z,1513250994.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:54.279Z,1513250994.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:54.652Z,1513250994.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:54.691Z,1513250994.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:55.046Z,1513250995.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:55.064Z,1513250995.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:55.447Z,1513250995.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:55.470Z,1513250995.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:55.874Z,1513250995.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:55.938Z,1513250995.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:56.256Z,1513250996.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:56.275Z,1513250996.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:56.706Z,1513250996.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:56.729Z,1513250996.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:57.064Z,1513250997.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:57.078Z,1513250997.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:57.454Z,1513250997.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:57.481Z,1513250997.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:57.861Z,1513250997.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:57.880Z,1513250997.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:58.262Z,1513250998.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:58.277Z,1513250998.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:58.720Z,1513250998.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:58.762Z,1513250998.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:59.084Z,1513250999.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:59.111Z,1513250999.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:59.461Z,1513250999.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:59.483Z,1513250999.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:29:59.856Z,1513250999.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:29:59.872Z,1513250999.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:00.246Z,1513251000.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:00.354Z,1513251000.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:00.663Z,1513251000.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:00.678Z,1513251000.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:01.052Z,1513251001.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:01.079Z,1513251001.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:01.447Z,1513251001.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:01.473Z,1513251001.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:01.868Z,1513251001.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:01.883Z,1513251001.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:02.358Z,1513251002.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:02.455Z,1513251002.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:02.652Z,1513251002.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:02.713Z,1513251002.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:03.061Z,1513251003.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:03.076Z,1513251003.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:03.457Z,1513251003.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:03.474Z,1513251003.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:03.866Z,1513251003.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:03.903Z,1513251003.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:04.259Z,1513251004.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:04.342Z,1513251004.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:04.647Z,1513251004.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:04.688Z,1513251004.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:05.052Z,1513251005.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:05.082Z,1513251005.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:05.451Z,1513251005.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:05.482Z,1513251005.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:05.855Z,1513251005.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:05.881Z,1513251005.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:06.248Z,1513251006.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:06.307Z,1513251006.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:06.665Z,1513251006.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:06.688Z,1513251006.688 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:06.688Z,1513251006.688 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 219
2017-12-14T11:30:06.688Z,1513251006.688 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:30:06.694Z,1513251006.694 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:06.694Z,1513251006.694 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 219
2017-12-14T11:30:06.694Z,1513251006.694 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:30:06.696Z,1513251006.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:06.696Z,1513251006.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 219
2017-12-14T11:30:06.696Z,1513251006.696 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:30:06.725Z,1513251006.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:30:06.725Z,1513251006.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:30:06.725Z,1513251006.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:30:07.050Z,1513251007.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:07.100Z,1513251007.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:30:07.100Z,1513251007.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 219
2017-12-14T11:30:07.100Z,1513251007.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:30:07.100Z,1513251007.100 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 219
2017-12-14T11:30:07.105Z,1513251007.105 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:30:07.105Z,1513251007.105 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 219
2017-12-14T11:30:07.456Z,1513251007.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:07.480Z,1513251007.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:30:07.480Z,1513251007.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:30:07.480Z,1513251007.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:30:07.481Z,1513251007.481 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:30:07.481Z,1513251007.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:30:07.481Z,1513251007.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:30:07.482Z,1513251007.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:30:07.482Z,1513251007.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:30:07.483Z,1513251007.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:30:07.849Z,1513251007.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:07.886Z,1513251007.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:08.252Z,1513251008.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:08.285Z,1513251008.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:08.681Z,1513251008.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:08.704Z,1513251008.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:09.067Z,1513251009.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:09.099Z,1513251009.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:09.457Z,1513251009.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:09.472Z,1513251009.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:09.861Z,1513251009.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:09.876Z,1513251009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:10.255Z,1513251010.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:10.275Z,1513251010.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:10.711Z,1513251010.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:10.742Z,1513251010.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:11.061Z,1513251011.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:11.076Z,1513251011.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:11.460Z,1513251011.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:11.479Z,1513251011.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:11.890Z,1513251011.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:11.939Z,1513251011.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:12.251Z,1513251012.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:12.281Z,1513251012.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:12.698Z,1513251012.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:12.769Z,1513251012.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:13.061Z,1513251013.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:13.089Z,1513251013.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:13.456Z,1513251013.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:13.488Z,1513251013.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:13.856Z,1513251013.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:13.883Z,1513251013.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:14.254Z,1513251014.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:14.269Z,1513251014.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:14.659Z,1513251014.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:14.674Z,1513251014.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:15.102Z,1513251015.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:15.122Z,1513251015.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:15.462Z,1513251015.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:15.477Z,1513251015.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:15.859Z,1513251015.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:15.875Z,1513251015.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:16.260Z,1513251016.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:16.274Z,1513251016.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:16.657Z,1513251016.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:16.680Z,1513251016.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:17.071Z,1513251017.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:17.086Z,1513251017.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:17.448Z,1513251017.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:17.483Z,1513251017.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:17.864Z,1513251017.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:17.881Z,1513251017.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:18.322Z,1513251018.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:18.411Z,1513251018.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:18.661Z,1513251018.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:18.677Z,1513251018.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:19.063Z,1513251019.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:19.079Z,1513251019.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:19.464Z,1513251019.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:19.479Z,1513251019.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:19.863Z,1513251019.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:19.878Z,1513251019.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:20.263Z,1513251020.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:20.346Z,1513251020.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:20.652Z,1513251020.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:20.678Z,1513251020.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:21.067Z,1513251021.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:21.081Z,1513251021.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:21.450Z,1513251021.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:21.478Z,1513251021.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:21.859Z,1513251021.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:21.874Z,1513251021.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:22.260Z,1513251022.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:22.275Z,1513251022.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:22.671Z,1513251022.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:22.686Z,1513251022.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:23.053Z,1513251023.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:23.087Z,1513251023.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:23.454Z,1513251023.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:23.499Z,1513251023.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:23.850Z,1513251023.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:23.884Z,1513251023.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:24.246Z,1513251024.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:24.281Z,1513251024.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:24.734Z,1513251024.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:24.840Z,1513251024.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:25.061Z,1513251025.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:25.076Z,1513251025.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:25.454Z,1513251025.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:25.470Z,1513251025.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:25.864Z,1513251025.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:25.923Z,1513251025.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:26.263Z,1513251026.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:26.278Z,1513251026.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:26.712Z,1513251026.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:26.775Z,1513251026.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:27.058Z,1513251027.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:27.072Z,1513251027.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:27.457Z,1513251027.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:27.511Z,1513251027.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:27.857Z,1513251027.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:27.872Z,1513251027.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:28.259Z,1513251028.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:28.273Z,1513251028.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:28.646Z,1513251028.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:28.677Z,1513251028.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:29.059Z,1513251029.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:29.084Z,1513251029.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:29.450Z,1513251029.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:29.464Z,1513251029.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:29.856Z,1513251029.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:29.887Z,1513251029.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:30.252Z,1513251030.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:30.266Z,1513251030.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:30.660Z,1513251030.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:30.674Z,1513251030.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:31.075Z,1513251031.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:31.118Z,1513251031.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:31.465Z,1513251031.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:31.479Z,1513251031.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:31.862Z,1513251031.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:31.877Z,1513251031.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:32.261Z,1513251032.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:32.326Z,1513251032.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:32.661Z,1513251032.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:32.676Z,1513251032.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:33.061Z,1513251033.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:33.075Z,1513251033.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:33.451Z,1513251033.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:33.466Z,1513251033.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:33.847Z,1513251033.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:33.877Z,1513251033.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:34.305Z,1513251034.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:34.382Z,1513251034.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:34.661Z,1513251034.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:34.676Z,1513251034.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:35.060Z,1513251035.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:35.105Z,1513251035.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:35.463Z,1513251035.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:35.478Z,1513251035.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:35.867Z,1513251035.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:35.882Z,1513251035.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:36.261Z,1513251036.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:36.275Z,1513251036.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:36.658Z,1513251036.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:36.679Z,1513251036.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:37.059Z,1513251037.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:37.078Z,1513251037.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:40.430Z,1513251040.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:40.452Z,1513251040.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:40.561Z,1513251040.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:40.603Z,1513251040.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:40.898Z,1513251040.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:40.932Z,1513251040.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:41.302Z,1513251041.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:41.327Z,1513251041.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:41.702Z,1513251041.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:41.729Z,1513251041.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:42.099Z,1513251042.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:42.130Z,1513251042.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:42.520Z,1513251042.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:42.535Z,1513251042.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:42.898Z,1513251042.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:42.931Z,1513251042.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:43.302Z,1513251043.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:43.326Z,1513251043.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:43.702Z,1513251043.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:43.727Z,1513251043.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:44.098Z,1513251044.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:44.133Z,1513251044.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:44.499Z,1513251044.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:44.534Z,1513251044.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:44.899Z,1513251044.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:44.952Z,1513251044.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:45.302Z,1513251045.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:45.338Z,1513251045.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:45.702Z,1513251045.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:45.769Z,1513251045.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:46.101Z,1513251046.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:46.123Z,1513251046.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:46.514Z,1513251046.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:46.544Z,1513251046.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:46.911Z,1513251046.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:46.944Z,1513251046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:47.303Z,1513251047.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:47.360Z,1513251047.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:47.699Z,1513251047.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:47.714Z,1513251047.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:48.110Z,1513251048.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:48.149Z,1513251048.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:48.514Z,1513251048.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:48.528Z,1513251048.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:48.907Z,1513251048.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:48.963Z,1513251048.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:49.306Z,1513251049.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:49.321Z,1513251049.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:49.702Z,1513251049.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:49.716Z,1513251049.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:50.098Z,1513251050.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:50.114Z,1513251050.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:50.507Z,1513251050.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:50.521Z,1513251050.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:50.902Z,1513251050.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:50.917Z,1513251050.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:51.306Z,1513251051.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:51.320Z,1513251051.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:51.706Z,1513251051.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:51.720Z,1513251051.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:52.099Z,1513251052.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:52.113Z,1513251052.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:52.499Z,1513251052.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:52.515Z,1513251052.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:52.908Z,1513251052.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:52.948Z,1513251052.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:53.304Z,1513251053.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:53.318Z,1513251053.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:53.701Z,1513251053.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:53.716Z,1513251053.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:54.103Z,1513251054.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:54.195Z,1513251054.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:54.504Z,1513251054.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:54.520Z,1513251054.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:54.908Z,1513251054.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:54.923Z,1513251054.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:55.304Z,1513251055.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:55.318Z,1513251055.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:55.704Z,1513251055.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:55.719Z,1513251055.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:56.103Z,1513251056.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:56.118Z,1513251056.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:56.507Z,1513251056.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:56.522Z,1513251056.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:56.905Z,1513251056.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:56.920Z,1513251056.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:57.339Z,1513251057.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:57.399Z,1513251057.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:57.704Z,1513251057.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:57.727Z,1513251057.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:58.101Z,1513251058.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:58.115Z,1513251058.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:58.508Z,1513251058.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:58.527Z,1513251058.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:58.902Z,1513251058.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:58.922Z,1513251058.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:59.309Z,1513251059.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:59.323Z,1513251059.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:30:59.710Z,1513251059.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:30:59.725Z,1513251059.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:00.110Z,1513251060.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:00.125Z,1513251060.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:00.555Z,1513251060.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:00.663Z,1513251060.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:00.906Z,1513251060.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:00.927Z,1513251060.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:01.306Z,1513251061.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:01.322Z,1513251061.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:01.710Z,1513251061.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:01.724Z,1513251061.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:02.111Z,1513251062.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:02.126Z,1513251062.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:02.507Z,1513251062.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:02.539Z,1513251062.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:02.908Z,1513251062.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:02.923Z,1513251062.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:03.307Z,1513251063.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:03.322Z,1513251063.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:03.705Z,1513251063.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:03.720Z,1513251063.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:04.098Z,1513251064.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:04.129Z,1513251064.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:04.498Z,1513251064.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:04.525Z,1513251064.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:04.902Z,1513251064.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:04.938Z,1513251064.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:05.302Z,1513251065.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:05.340Z,1513251065.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:05.703Z,1513251065.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:05.735Z,1513251065.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:06.097Z,1513251066.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:06.136Z,1513251066.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:06.498Z,1513251066.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:06.541Z,1513251066.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:06.936Z,1513251066.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:06.960Z,1513251066.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:07.304Z,1513251067.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:07.331Z,1513251067.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:07.709Z,1513251067.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:07.723Z,1513251067.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:08.109Z,1513251068.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:08.124Z,1513251068.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:08.508Z,1513251068.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:08.531Z,1513251068.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:08.906Z,1513251068.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:08.928Z,1513251068.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:09.308Z,1513251069.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:09.323Z,1513251069.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:09.704Z,1513251069.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:09.770Z,1513251069.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:10.131Z,1513251070.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:10.171Z,1513251070.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:10.507Z,1513251070.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:10.522Z,1513251070.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:10.903Z,1513251070.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:10.954Z,1513251070.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:11.306Z,1513251071.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:11.321Z,1513251071.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:11.705Z,1513251071.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:11.762Z,1513251071.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:12.105Z,1513251072.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:12.132Z,1513251072.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:12.508Z,1513251072.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:12.522Z,1513251072.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:12.909Z,1513251072.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:12.924Z,1513251072.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:13.330Z,1513251073.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:13.369Z,1513251073.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:13.707Z,1513251073.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:13.722Z,1513251073.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:14.095Z,1513251074.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:14.127Z,1513251074.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:14.520Z,1513251074.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:14.536Z,1513251074.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:14.917Z,1513251074.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:14.932Z,1513251074.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:15.311Z,1513251075.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:15.336Z,1513251075.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:15.710Z,1513251075.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:15.769Z,1513251075.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:16.100Z,1513251076.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:16.155Z,1513251076.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:16.534Z,1513251076.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:16.583Z,1513251076.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:16.905Z,1513251076.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:16.948Z,1513251076.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:17.308Z,1513251077.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:17.346Z,1513251077.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:17.700Z,1513251077.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:17.756Z,1513251077.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:18.104Z,1513251078.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:18.156Z,1513251078.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:18.503Z,1513251078.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:18.519Z,1513251078.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:18.909Z,1513251078.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:18.957Z,1513251078.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:19.308Z,1513251079.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:19.355Z,1513251079.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:19.710Z,1513251079.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:19.769Z,1513251079.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:20.110Z,1513251080.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:20.187Z,1513251080.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:20.500Z,1513251080.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:20.544Z,1513251080.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:20.914Z,1513251080.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:20.952Z,1513251080.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:21.313Z,1513251081.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:21.356Z,1513251081.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:21.708Z,1513251081.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:21.735Z,1513251081.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:22.118Z,1513251082.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:22.142Z,1513251082.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:22.502Z,1513251082.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:22.548Z,1513251082.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:22.898Z,1513251082.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:22.965Z,1513251082.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:23.299Z,1513251083.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:23.332Z,1513251083.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:23.699Z,1513251083.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:23.722Z,1513251083.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:24.103Z,1513251084.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:24.118Z,1513251084.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:24.519Z,1513251084.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:24.547Z,1513251084.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:24.918Z,1513251084.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:24.942Z,1513251084.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:25.308Z,1513251085.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:25.348Z,1513251085.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:25.705Z,1513251085.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:25.720Z,1513251085.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:26.113Z,1513251086.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:26.140Z,1513251086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:26.527Z,1513251086.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:26.617Z,1513251086.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:26.925Z,1513251086.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:26.972Z,1513251086.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:27.324Z,1513251087.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:27.371Z,1513251087.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:27.700Z,1513251087.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:27.747Z,1513251087.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:28.132Z,1513251088.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:28.175Z,1513251088.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:28.501Z,1513251088.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:28.531Z,1513251088.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:28.923Z,1513251088.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:28.983Z,1513251088.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:29.307Z,1513251089.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:29.357Z,1513251089.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:29.708Z,1513251089.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:29.767Z,1513251089.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:30.109Z,1513251090.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:30.133Z,1513251090.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:30.500Z,1513251090.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:30.538Z,1513251090.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:30.591Z,1513251090.591 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T11:31:30.591Z,1513251090.591 [NAL9602] No Fault, FailCount= 5
2017-12-14T11:31:30.882Z,1513251090.882 [NAL9602](INFO): Powering up NAL9602
2017-12-14T11:31:30.916Z,1513251090.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:30.939Z,1513251090.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:31.300Z,1513251091.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:31.335Z,1513251091.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:31.700Z,1513251091.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:31.779Z,1513251091.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:32.136Z,1513251092.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:32.219Z,1513251092.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:32.507Z,1513251092.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:32.521Z,1513251092.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:32.908Z,1513251092.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:32.967Z,1513251092.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:33.301Z,1513251093.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:33.338Z,1513251093.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:33.699Z,1513251093.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:33.758Z,1513251093.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:34.109Z,1513251094.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:34.161Z,1513251094.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:34.504Z,1513251094.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:34.527Z,1513251094.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:34.910Z,1513251094.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:34.956Z,1513251094.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:35.310Z,1513251095.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:35.336Z,1513251095.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:35.720Z,1513251095.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:35.762Z,1513251095.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:36.109Z,1513251096.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:36.159Z,1513251096.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:36.508Z,1513251096.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:36.540Z,1513251096.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:36.563Z,1513251096.563 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:31:36.563Z,1513251096.563 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:31:36.563Z,1513251096.563 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:31:36.563Z,1513251096.563 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:31:36.900Z,1513251096.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:36.943Z,1513251096.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:36.981Z,1513251096.981 [Default:CheckIn:D] Stopped
2017-12-14T11:31:36.981Z,1513251096.981 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:31:37.301Z,1513251097.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:37.366Z,1513251097.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:37.380Z,1513251097.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 658.359831 min 
2017-12-14T11:31:37.380Z,1513251097.380 [Default:CheckIn:E] Stopped
2017-12-14T11:31:37.380Z,1513251097.380 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:31:37.380Z,1513251097.380 [Default:CheckIn] Stopped
2017-12-14T11:31:37.380Z,1513251097.380 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:31:37.381Z,1513251097.381 [Default:CheckIn](INFO): Running loop #64
2017-12-14T11:31:37.381Z,1513251097.381 [Default:CheckIn] Running Loop=64
2017-12-14T11:31:37.381Z,1513251097.381 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:31:37.381Z,1513251097.381 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:31:43.298Z,1513251103.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:43.340Z,1513251103.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:43.490Z,1513251103.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:43.535Z,1513251103.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:43.775Z,1513251103.775 [NAL9602](INFO): NAL9602 initialized
2017-12-14T11:31:43.792Z,1513251103.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:43.846Z,1513251103.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:44.195Z,1513251104.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:44.216Z,1513251104.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:44.610Z,1513251104.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:44.626Z,1513251104.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:45.012Z,1513251105.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:45.042Z,1513251105.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:45.404Z,1513251105.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:45.433Z,1513251105.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:45.791Z,1513251105.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:45.823Z,1513251105.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:46.192Z,1513251106.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:46.207Z,1513251106.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:46.592Z,1513251106.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:46.644Z,1513251106.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:46.987Z,1513251106.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:47.012Z,1513251107.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:47.406Z,1513251107.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:47.420Z,1513251107.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:47.811Z,1513251107.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:47.825Z,1513251107.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:48.207Z,1513251108.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:48.222Z,1513251108.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:48.588Z,1513251108.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:48.711Z,1513251108.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:48.987Z,1513251108.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:49.020Z,1513251109.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:49.392Z,1513251109.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:49.417Z,1513251109.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:49.787Z,1513251109.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:49.845Z,1513251109.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:50.201Z,1513251110.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:50.233Z,1513251110.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:50.639Z,1513251110.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:50.715Z,1513251110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:51.006Z,1513251111.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:51.042Z,1513251111.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:51.396Z,1513251111.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:51.411Z,1513251111.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:51.792Z,1513251111.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:51.833Z,1513251111.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:52.211Z,1513251112.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:52.226Z,1513251112.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:52.589Z,1513251112.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:52.624Z,1513251112.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:53.008Z,1513251113.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:53.099Z,1513251113.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:53.427Z,1513251113.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:53.443Z,1513251113.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:53.816Z,1513251113.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:53.847Z,1513251113.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:54.216Z,1513251114.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:54.230Z,1513251114.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:54.595Z,1513251114.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:54.639Z,1513251114.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:54.998Z,1513251114.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:55.012Z,1513251115.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:55.398Z,1513251115.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:55.479Z,1513251115.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:55.794Z,1513251115.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:55.814Z,1513251115.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:56.203Z,1513251116.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:56.333Z,1513251116.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:56.602Z,1513251116.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:56.630Z,1513251116.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:57.017Z,1513251117.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:57.072Z,1513251117.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:57.391Z,1513251117.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:57.406Z,1513251117.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:57.793Z,1513251117.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:57.808Z,1513251117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:58.192Z,1513251118.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:58.207Z,1513251118.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:58.651Z,1513251118.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:58.707Z,1513251118.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:58.995Z,1513251118.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:59.048Z,1513251119.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:59.407Z,1513251119.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:59.482Z,1513251119.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:31:59.803Z,1513251119.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:31:59.847Z,1513251119.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:00.201Z,1513251120.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:00.216Z,1513251120.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:00.598Z,1513251120.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:00.613Z,1513251120.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:00.999Z,1513251120.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:01.014Z,1513251121.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:01.440Z,1513251121.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:01.459Z,1513251121.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:01.799Z,1513251121.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:01.841Z,1513251121.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:02.201Z,1513251122.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:02.216Z,1513251122.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:02.602Z,1513251122.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:02.696Z,1513251122.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:02.997Z,1513251122.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:03.033Z,1513251123.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:03.396Z,1513251123.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:03.430Z,1513251123.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:03.794Z,1513251123.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:03.809Z,1513251123.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:04.197Z,1513251124.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:04.212Z,1513251124.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:04.597Z,1513251124.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:04.690Z,1513251124.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:04.987Z,1513251124.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:05.015Z,1513251125.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:05.413Z,1513251125.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:05.472Z,1513251125.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:05.822Z,1513251125.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:05.856Z,1513251125.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:06.208Z,1513251126.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:06.243Z,1513251126.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:06.587Z,1513251126.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:06.610Z,1513251126.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:06.994Z,1513251126.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:07.008Z,1513251127.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:07.396Z,1513251127.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:07.439Z,1513251127.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:07.803Z,1513251127.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:07.846Z,1513251127.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:08.209Z,1513251128.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:08.239Z,1513251128.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:08.602Z,1513251128.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:08.617Z,1513251128.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:09.040Z,1513251129.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:09.078Z,1513251129.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:09.409Z,1513251129.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:09.436Z,1513251129.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:09.787Z,1513251129.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:09.819Z,1513251129.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:10.188Z,1513251130.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:10.219Z,1513251130.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:10.588Z,1513251130.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:10.628Z,1513251130.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:10.987Z,1513251130.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:11.031Z,1513251131.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:11.400Z,1513251131.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:11.430Z,1513251131.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:11.805Z,1513251131.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:11.830Z,1513251131.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:12.222Z,1513251132.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:12.287Z,1513251132.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:12.596Z,1513251132.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:12.615Z,1513251132.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:13.003Z,1513251133.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:13.017Z,1513251133.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:13.390Z,1513251133.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:13.423Z,1513251133.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:13.799Z,1513251133.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:13.814Z,1513251133.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:14.209Z,1513251134.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:14.231Z,1513251134.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:14.611Z,1513251134.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:14.631Z,1513251134.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:15.010Z,1513251135.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:15.031Z,1513251135.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:15.388Z,1513251135.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:15.424Z,1513251135.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:15.787Z,1513251135.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:15.816Z,1513251135.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:16.199Z,1513251136.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:16.225Z,1513251136.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:16.592Z,1513251136.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:16.689Z,1513251136.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:16.992Z,1513251136.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:17.042Z,1513251137.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:17.409Z,1513251137.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:17.484Z,1513251137.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:17.811Z,1513251137.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:17.825Z,1513251137.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:18.212Z,1513251138.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:18.270Z,1513251138.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:18.671Z,1513251138.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:18.723Z,1513251138.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:18.987Z,1513251138.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:19.061Z,1513251139.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:19.385Z,1513251139.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:19.400Z,1513251139.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:19.788Z,1513251139.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:19.802Z,1513251139.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:20.220Z,1513251140.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:20.241Z,1513251140.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:20.602Z,1513251140.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:20.617Z,1513251140.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:21.018Z,1513251141.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:21.050Z,1513251141.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:21.394Z,1513251141.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:21.420Z,1513251141.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:21.796Z,1513251141.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:21.819Z,1513251141.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:22.187Z,1513251142.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:22.230Z,1513251142.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:22.611Z,1513251142.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:22.625Z,1513251142.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:22.987Z,1513251142.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:23.027Z,1513251143.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:23.410Z,1513251143.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:23.425Z,1513251143.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:23.814Z,1513251143.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:23.837Z,1513251143.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:24.198Z,1513251144.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:24.230Z,1513251144.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:24.603Z,1513251144.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:24.633Z,1513251144.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:25.027Z,1513251145.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:25.086Z,1513251145.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:25.400Z,1513251145.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:25.443Z,1513251145.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:25.791Z,1513251145.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:25.805Z,1513251145.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:26.206Z,1513251146.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:26.228Z,1513251146.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:26.602Z,1513251146.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:26.630Z,1513251146.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:27.020Z,1513251147.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:27.041Z,1513251147.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:27.397Z,1513251147.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:27.466Z,1513251147.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:27.791Z,1513251147.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:27.835Z,1513251147.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:28.229Z,1513251148.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:28.295Z,1513251148.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:28.610Z,1513251148.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:28.648Z,1513251148.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:28.997Z,1513251148.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:29.019Z,1513251149.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:29.406Z,1513251149.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:29.420Z,1513251149.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:29.809Z,1513251149.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:29.825Z,1513251149.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:30.202Z,1513251150.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:30.228Z,1513251150.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:30.591Z,1513251150.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:30.691Z,1513251150.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:30.991Z,1513251150.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:31.043Z,1513251151.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:31.393Z,1513251151.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:31.421Z,1513251151.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:31.787Z,1513251151.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:31.830Z,1513251151.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:32.211Z,1513251152.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:32.226Z,1513251152.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:32.644Z,1513251152.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:32.688Z,1513251152.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:33.002Z,1513251153.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:33.042Z,1513251153.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:33.390Z,1513251153.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:33.405Z,1513251153.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:33.791Z,1513251153.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:33.810Z,1513251153.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:34.191Z,1513251154.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:34.214Z,1513251154.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:34.588Z,1513251154.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:34.669Z,1513251154.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:34.998Z,1513251154.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:35.050Z,1513251155.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:35.406Z,1513251155.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:35.438Z,1513251155.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:35.807Z,1513251155.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:35.835Z,1513251155.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:36.207Z,1513251156.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:36.246Z,1513251156.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:36.608Z,1513251156.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:36.632Z,1513251156.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:36.988Z,1513251156.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:37.023Z,1513251157.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:37.394Z,1513251157.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:37.421Z,1513251157.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:40.971Z,1513251160.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:41.102Z,1513251161.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:41.219Z,1513251161.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:41.263Z,1513251161.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:41.593Z,1513251161.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:41.617Z,1513251161.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:41.990Z,1513251161.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:42.039Z,1513251162.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:42.410Z,1513251162.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:42.442Z,1513251162.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:42.774Z,1513251162.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:42.826Z,1513251162.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:43.186Z,1513251163.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:43.200Z,1513251163.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:43.580Z,1513251163.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:43.595Z,1513251163.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:43.983Z,1513251163.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:43.998Z,1513251163.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:44.392Z,1513251164.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:44.435Z,1513251164.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:44.794Z,1513251164.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:44.808Z,1513251164.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:45.190Z,1513251165.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:45.204Z,1513251165.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:45.585Z,1513251165.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:45.601Z,1513251165.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:45.979Z,1513251165.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:45.994Z,1513251165.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:46.381Z,1513251166.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:46.395Z,1513251166.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:46.790Z,1513251166.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:46.805Z,1513251166.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:47.190Z,1513251167.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:47.211Z,1513251167.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:47.591Z,1513251167.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:47.646Z,1513251167.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:47.991Z,1513251167.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:48.011Z,1513251168.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:48.380Z,1513251168.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:48.399Z,1513251168.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:48.780Z,1513251168.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:48.794Z,1513251168.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:49.186Z,1513251169.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:49.201Z,1513251169.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:49.583Z,1513251169.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:49.603Z,1513251169.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:49.979Z,1513251169.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:49.994Z,1513251169.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:50.393Z,1513251170.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:50.409Z,1513251170.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:50.792Z,1513251170.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:50.839Z,1513251170.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:51.198Z,1513251171.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:51.246Z,1513251171.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:51.568Z,1513251171.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:51.596Z,1513251171.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:51.987Z,1513251171.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:52.007Z,1513251172.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:52.372Z,1513251172.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:52.418Z,1513251172.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:52.790Z,1513251172.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:52.812Z,1513251172.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:53.186Z,1513251173.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:53.211Z,1513251173.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:53.586Z,1513251173.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:53.605Z,1513251173.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:54.020Z,1513251174.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:54.039Z,1513251174.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:54.375Z,1513251174.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:54.415Z,1513251174.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:54.778Z,1513251174.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:54.812Z,1513251174.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:55.172Z,1513251175.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:55.191Z,1513251175.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:55.576Z,1513251175.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:55.591Z,1513251175.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:55.978Z,1513251175.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:55.992Z,1513251175.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:56.420Z,1513251176.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:56.443Z,1513251176.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:56.791Z,1513251176.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:56.806Z,1513251176.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:57.227Z,1513251177.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:57.251Z,1513251177.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:57.565Z,1513251177.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:57.596Z,1513251177.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:58.039Z,1513251178.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:58.100Z,1513251178.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:58.376Z,1513251178.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:58.404Z,1513251178.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:58.791Z,1513251178.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:58.806Z,1513251178.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:59.193Z,1513251179.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:59.215Z,1513251179.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:59.599Z,1513251179.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:32:59.614Z,1513251179.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:32:59.995Z,1513251179.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:00.012Z,1513251180.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:00.412Z,1513251180.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:00.452Z,1513251180.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:00.780Z,1513251180.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:00.816Z,1513251180.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:01.169Z,1513251181.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:01.200Z,1513251181.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:01.578Z,1513251181.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:01.606Z,1513251181.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:01.975Z,1513251181.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:02.009Z,1513251182.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:02.402Z,1513251182.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:02.432Z,1513251182.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:02.786Z,1513251182.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:02.813Z,1513251182.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:03.201Z,1513251183.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:03.267Z,1513251183.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:03.582Z,1513251183.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:03.619Z,1513251183.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:03.976Z,1513251183.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:03.992Z,1513251183.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:04.379Z,1513251184.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:04.423Z,1513251184.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:04.771Z,1513251184.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:04.791Z,1513251184.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:05.181Z,1513251185.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:05.278Z,1513251185.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:05.601Z,1513251185.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:05.615Z,1513251185.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:05.996Z,1513251185.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:06.015Z,1513251186.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:06.372Z,1513251186.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:06.407Z,1513251186.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:06.822Z,1513251186.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:06.891Z,1513251186.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:07.171Z,1513251187.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:07.198Z,1513251187.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:07.576Z,1513251187.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:07.602Z,1513251187.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:07.602Z,1513251187.602 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 220
2017-12-14T11:33:07.602Z,1513251187.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:33:07.604Z,1513251187.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:07.604Z,1513251187.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 220
2017-12-14T11:33:07.604Z,1513251187.604 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:33:07.606Z,1513251187.606 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:07.607Z,1513251187.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 220
2017-12-14T11:33:07.607Z,1513251187.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:33:07.618Z,1513251187.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:33:07.619Z,1513251187.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:33:07.619Z,1513251187.619 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:33:07.977Z,1513251187.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:08.013Z,1513251188.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:33:08.013Z,1513251188.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 220
2017-12-14T11:33:08.014Z,1513251188.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:33:08.014Z,1513251188.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 220
2017-12-14T11:33:08.014Z,1513251188.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:33:08.014Z,1513251188.014 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 220
2017-12-14T11:33:08.393Z,1513251188.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:08.406Z,1513251188.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:33:08.407Z,1513251188.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:33:08.407Z,1513251188.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:33:08.407Z,1513251188.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:33:08.408Z,1513251188.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:33:08.408Z,1513251188.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:33:08.408Z,1513251188.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:33:08.409Z,1513251188.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:33:08.409Z,1513251188.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:33:08.791Z,1513251188.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:08.813Z,1513251188.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:09.206Z,1513251189.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:09.227Z,1513251189.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:09.565Z,1513251189.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:09.579Z,1513251189.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:09.978Z,1513251189.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:10.017Z,1513251190.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:10.428Z,1513251190.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:10.466Z,1513251190.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:10.776Z,1513251190.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:10.795Z,1513251190.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:11.199Z,1513251191.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:11.223Z,1513251191.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:11.585Z,1513251191.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:11.600Z,1513251191.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:11.973Z,1513251191.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:11.987Z,1513251191.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:12.388Z,1513251192.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:12.403Z,1513251192.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:12.789Z,1513251192.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:12.804Z,1513251192.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:13.191Z,1513251193.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:13.212Z,1513251193.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:13.600Z,1513251193.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:13.651Z,1513251193.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:13.989Z,1513251193.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:14.003Z,1513251194.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:14.372Z,1513251194.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:14.397Z,1513251194.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:14.789Z,1513251194.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:14.803Z,1513251194.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:15.195Z,1513251195.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:15.210Z,1513251195.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:15.595Z,1513251195.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:15.609Z,1513251195.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:15.994Z,1513251195.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:16.010Z,1513251196.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:16.414Z,1513251196.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:16.445Z,1513251196.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:16.790Z,1513251196.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:16.805Z,1513251196.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:17.175Z,1513251197.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:17.202Z,1513251197.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:17.587Z,1513251197.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:17.601Z,1513251197.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:17.971Z,1513251197.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:17.999Z,1513251197.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:18.402Z,1513251198.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:18.426Z,1513251198.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:18.794Z,1513251198.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:18.808Z,1513251198.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:19.199Z,1513251199.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:19.213Z,1513251199.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:19.586Z,1513251199.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:19.618Z,1513251199.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:19.976Z,1513251199.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:20.002Z,1513251200.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:20.370Z,1513251200.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:20.419Z,1513251200.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:20.771Z,1513251200.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:20.803Z,1513251200.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:21.198Z,1513251201.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:21.214Z,1513251201.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:21.595Z,1513251201.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:21.610Z,1513251201.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:21.986Z,1513251201.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:22.016Z,1513251202.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:22.380Z,1513251202.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:22.412Z,1513251202.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:22.810Z,1513251202.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:22.853Z,1513251202.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:23.183Z,1513251203.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:23.208Z,1513251203.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:23.576Z,1513251203.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:23.606Z,1513251203.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:23.971Z,1513251203.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:24.007Z,1513251204.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:24.423Z,1513251204.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:24.451Z,1513251204.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:24.793Z,1513251204.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:24.808Z,1513251204.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:25.190Z,1513251205.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:25.250Z,1513251205.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:25.580Z,1513251205.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:25.595Z,1513251205.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:26.011Z,1513251206.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:26.083Z,1513251206.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:26.390Z,1513251206.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:26.404Z,1513251206.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:26.790Z,1513251206.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:26.843Z,1513251206.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:27.195Z,1513251207.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:27.210Z,1513251207.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:27.597Z,1513251207.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:27.635Z,1513251207.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:27.994Z,1513251207.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:28.015Z,1513251208.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:28.384Z,1513251208.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:28.403Z,1513251208.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:28.790Z,1513251208.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:28.805Z,1513251208.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:29.210Z,1513251209.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:29.241Z,1513251209.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:29.595Z,1513251209.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:29.615Z,1513251209.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:29.997Z,1513251209.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:30.011Z,1513251210.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:30.401Z,1513251210.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:30.416Z,1513251210.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:30.795Z,1513251210.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:30.816Z,1513251210.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:31.199Z,1513251211.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:31.214Z,1513251211.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:31.562Z,1513251211.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:31.599Z,1513251211.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:31.972Z,1513251211.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:32.007Z,1513251212.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:32.402Z,1513251212.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:32.441Z,1513251212.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:32.778Z,1513251212.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:32.794Z,1513251212.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:33.186Z,1513251213.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:33.209Z,1513251213.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:33.593Z,1513251213.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:33.625Z,1513251213.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:33.981Z,1513251213.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:33.995Z,1513251213.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:34.382Z,1513251214.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:34.422Z,1513251214.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:34.781Z,1513251214.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:34.795Z,1513251214.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:35.194Z,1513251215.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:35.208Z,1513251215.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:35.624Z,1513251215.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:35.675Z,1513251215.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:35.991Z,1513251215.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:36.008Z,1513251216.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:36.382Z,1513251216.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:36.400Z,1513251216.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:36.788Z,1513251216.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:36.803Z,1513251216.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:37.181Z,1513251217.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:37.196Z,1513251217.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:37.580Z,1513251217.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:37.604Z,1513251217.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:41.157Z,1513251221.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:41.193Z,1513251221.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:41.298Z,1513251221.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:41.335Z,1513251221.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:41.661Z,1513251221.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:41.687Z,1513251221.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:42.063Z,1513251222.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:42.087Z,1513251222.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:42.440Z,1513251222.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:42.463Z,1513251222.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:42.861Z,1513251222.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:42.893Z,1513251222.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:43.242Z,1513251223.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:43.288Z,1513251223.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:43.646Z,1513251223.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:43.662Z,1513251223.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:44.056Z,1513251224.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:44.072Z,1513251224.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:44.458Z,1513251224.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:44.474Z,1513251224.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:44.858Z,1513251224.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:44.875Z,1513251224.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:45.258Z,1513251225.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:45.276Z,1513251225.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:45.655Z,1513251225.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:45.670Z,1513251225.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:46.048Z,1513251226.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:46.067Z,1513251226.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:46.450Z,1513251226.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:46.465Z,1513251226.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:46.842Z,1513251226.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:46.871Z,1513251226.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:47.263Z,1513251227.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:47.323Z,1513251227.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:47.666Z,1513251227.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:47.730Z,1513251227.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:48.065Z,1513251228.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:48.079Z,1513251228.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:48.439Z,1513251228.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:48.466Z,1513251228.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:48.839Z,1513251228.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:48.927Z,1513251228.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:49.239Z,1513251229.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:49.275Z,1513251229.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:49.641Z,1513251229.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:49.712Z,1513251229.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:50.039Z,1513251230.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:50.078Z,1513251230.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:50.462Z,1513251230.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:50.478Z,1513251230.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:50.865Z,1513251230.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:50.880Z,1513251230.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:51.257Z,1513251231.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:51.272Z,1513251231.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:51.640Z,1513251231.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:51.672Z,1513251231.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:52.036Z,1513251232.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:52.096Z,1513251232.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:52.479Z,1513251232.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:52.499Z,1513251232.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:52.842Z,1513251232.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:52.856Z,1513251232.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:53.258Z,1513251233.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:53.279Z,1513251233.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:53.670Z,1513251233.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:53.684Z,1513251233.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:54.067Z,1513251234.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:54.081Z,1513251234.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:54.442Z,1513251234.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:54.456Z,1513251234.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:54.844Z,1513251234.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:54.860Z,1513251234.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:55.286Z,1513251235.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:55.343Z,1513251235.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:55.646Z,1513251235.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:55.661Z,1513251235.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:56.043Z,1513251236.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:56.058Z,1513251236.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:56.461Z,1513251236.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:56.490Z,1513251236.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:56.854Z,1513251236.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:56.886Z,1513251236.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:57.260Z,1513251237.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:57.289Z,1513251237.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:57.643Z,1513251237.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:57.658Z,1513251237.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:58.041Z,1513251238.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:58.098Z,1513251238.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:58.497Z,1513251238.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:58.533Z,1513251238.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:58.845Z,1513251238.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:58.860Z,1513251238.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:59.258Z,1513251239.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:59.288Z,1513251239.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:33:59.658Z,1513251239.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:33:59.689Z,1513251239.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:00.049Z,1513251240.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:00.071Z,1513251240.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:00.448Z,1513251240.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:00.467Z,1513251240.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:00.850Z,1513251240.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:00.864Z,1513251240.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:01.248Z,1513251241.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:01.262Z,1513251241.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:01.664Z,1513251241.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:01.701Z,1513251241.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:02.046Z,1513251242.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:02.067Z,1513251242.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:02.454Z,1513251242.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:02.468Z,1513251242.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:02.858Z,1513251242.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:02.872Z,1513251242.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:03.253Z,1513251243.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:03.275Z,1513251243.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:03.651Z,1513251243.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:03.666Z,1513251243.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:04.039Z,1513251244.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:04.062Z,1513251244.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:04.447Z,1513251244.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:04.467Z,1513251244.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:04.893Z,1513251244.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:04.921Z,1513251244.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:05.266Z,1513251245.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:05.280Z,1513251245.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:05.662Z,1513251245.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:05.687Z,1513251245.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:06.063Z,1513251246.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:06.077Z,1513251246.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:06.439Z,1513251246.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:06.464Z,1513251246.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:06.839Z,1513251246.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:06.870Z,1513251246.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:07.239Z,1513251247.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:07.267Z,1513251247.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:07.657Z,1513251247.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:07.672Z,1513251247.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:08.040Z,1513251248.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:08.067Z,1513251248.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:08.460Z,1513251248.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:08.480Z,1513251248.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:08.873Z,1513251248.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:08.896Z,1513251248.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:09.261Z,1513251249.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:09.276Z,1513251249.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:09.639Z,1513251249.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:09.666Z,1513251249.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:10.066Z,1513251250.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:10.147Z,1513251250.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:10.445Z,1513251250.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:10.519Z,1513251250.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:10.839Z,1513251250.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:10.877Z,1513251250.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:11.262Z,1513251251.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:11.278Z,1513251251.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:11.669Z,1513251251.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:11.726Z,1513251251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:12.051Z,1513251252.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:12.090Z,1513251252.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:12.440Z,1513251252.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:12.491Z,1513251252.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:12.841Z,1513251252.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:12.872Z,1513251252.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:13.243Z,1513251253.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:13.283Z,1513251253.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:13.634Z,1513251253.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:13.649Z,1513251253.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:14.043Z,1513251254.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:14.058Z,1513251254.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:14.453Z,1513251254.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:14.482Z,1513251254.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:14.857Z,1513251254.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:14.887Z,1513251254.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:15.255Z,1513251255.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:15.285Z,1513251255.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:15.648Z,1513251255.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:15.663Z,1513251255.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:16.041Z,1513251256.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:16.056Z,1513251256.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:16.456Z,1513251256.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:16.485Z,1513251256.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:16.847Z,1513251256.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:16.862Z,1513251256.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:17.253Z,1513251257.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:17.290Z,1513251257.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:17.658Z,1513251257.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:17.691Z,1513251257.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:18.057Z,1513251258.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:18.095Z,1513251258.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:18.451Z,1513251258.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:18.487Z,1513251258.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:18.845Z,1513251258.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:18.863Z,1513251258.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:19.246Z,1513251259.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:19.260Z,1513251259.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:19.646Z,1513251259.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:19.669Z,1513251259.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:20.046Z,1513251260.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:20.062Z,1513251260.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:20.454Z,1513251260.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:20.469Z,1513251260.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:20.853Z,1513251260.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:20.899Z,1513251260.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:21.250Z,1513251261.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:21.266Z,1513251261.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:21.643Z,1513251261.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:21.671Z,1513251261.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:22.051Z,1513251262.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:22.075Z,1513251262.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:22.468Z,1513251262.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:22.484Z,1513251262.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:22.840Z,1513251262.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:22.875Z,1513251262.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:23.250Z,1513251263.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:23.288Z,1513251263.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:23.654Z,1513251263.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:23.682Z,1513251263.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:24.055Z,1513251264.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:24.083Z,1513251264.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:24.437Z,1513251264.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:24.451Z,1513251264.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:24.846Z,1513251264.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:24.861Z,1513251264.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:25.243Z,1513251265.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:25.258Z,1513251265.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:25.641Z,1513251265.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:25.656Z,1513251265.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:26.044Z,1513251266.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:26.059Z,1513251266.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:26.453Z,1513251266.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:26.468Z,1513251266.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:26.857Z,1513251266.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:26.893Z,1513251266.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:27.258Z,1513251267.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:27.294Z,1513251267.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:27.645Z,1513251267.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:27.659Z,1513251267.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:28.055Z,1513251268.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:28.070Z,1513251268.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:28.449Z,1513251268.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:28.471Z,1513251268.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:28.844Z,1513251268.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:28.867Z,1513251268.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:29.254Z,1513251269.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:29.269Z,1513251269.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:29.653Z,1513251269.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:29.668Z,1513251269.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:30.054Z,1513251270.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:30.069Z,1513251270.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:30.452Z,1513251270.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:30.467Z,1513251270.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:30.849Z,1513251270.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:30.897Z,1513251270.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:31.256Z,1513251271.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:31.271Z,1513251271.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:31.652Z,1513251271.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:31.672Z,1513251271.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:32.051Z,1513251272.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:32.066Z,1513251272.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:32.459Z,1513251272.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:32.479Z,1513251272.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:32.863Z,1513251272.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:32.919Z,1513251272.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:33.259Z,1513251273.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:33.292Z,1513251273.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:33.639Z,1513251273.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:33.667Z,1513251273.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:34.090Z,1513251274.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:34.167Z,1513251274.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:34.460Z,1513251274.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:34.479Z,1513251274.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:34.843Z,1513251274.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:34.912Z,1513251274.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:35.263Z,1513251275.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:35.278Z,1513251275.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:35.662Z,1513251275.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:35.676Z,1513251275.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:36.060Z,1513251276.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:36.086Z,1513251276.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:36.436Z,1513251276.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:36.475Z,1513251276.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:36.839Z,1513251276.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:36.875Z,1513251276.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:37.276Z,1513251277.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:37.335Z,1513251277.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:37.642Z,1513251277.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:37.679Z,1513251277.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:41.178Z,1513251281.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:41.193Z,1513251281.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:41.298Z,1513251281.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:41.327Z,1513251281.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:41.670Z,1513251281.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:41.685Z,1513251281.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:42.070Z,1513251282.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:42.089Z,1513251282.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:42.444Z,1513251282.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:42.471Z,1513251282.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:42.849Z,1513251282.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:42.864Z,1513251282.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:43.244Z,1513251283.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:43.295Z,1513251283.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:43.662Z,1513251283.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:43.696Z,1513251283.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:44.046Z,1513251284.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:44.067Z,1513251284.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:44.454Z,1513251284.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:44.469Z,1513251284.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:44.862Z,1513251284.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:44.876Z,1513251284.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:45.254Z,1513251285.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:45.269Z,1513251285.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:45.648Z,1513251285.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:45.671Z,1513251285.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:46.050Z,1513251286.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:46.066Z,1513251286.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:46.448Z,1513251286.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:46.471Z,1513251286.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:46.879Z,1513251286.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:46.927Z,1513251286.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:47.257Z,1513251287.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:47.276Z,1513251287.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:47.657Z,1513251287.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:47.673Z,1513251287.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:48.058Z,1513251288.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:48.079Z,1513251288.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:48.449Z,1513251288.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:48.479Z,1513251288.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:48.852Z,1513251288.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:48.875Z,1513251288.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:49.255Z,1513251289.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:49.270Z,1513251289.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:49.636Z,1513251289.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:49.672Z,1513251289.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:50.081Z,1513251290.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:50.107Z,1513251290.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:50.466Z,1513251290.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:50.488Z,1513251290.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:50.866Z,1513251290.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:50.887Z,1513251290.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:51.263Z,1513251291.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:51.283Z,1513251291.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:51.652Z,1513251291.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:51.667Z,1513251291.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:52.056Z,1513251292.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:52.079Z,1513251292.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:52.440Z,1513251292.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:52.465Z,1513251292.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:52.860Z,1513251292.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:52.875Z,1513251292.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:53.284Z,1513251293.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:53.323Z,1513251293.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:53.663Z,1513251293.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:53.683Z,1513251293.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:54.068Z,1513251294.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:54.087Z,1513251294.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:54.439Z,1513251294.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:54.471Z,1513251294.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:54.839Z,1513251294.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:54.895Z,1513251294.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:55.243Z,1513251295.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:55.307Z,1513251295.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:55.648Z,1513251295.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:55.676Z,1513251295.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:56.046Z,1513251296.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:56.070Z,1513251296.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:56.479Z,1513251296.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:56.547Z,1513251296.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:56.874Z,1513251296.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:56.888Z,1513251296.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:57.257Z,1513251297.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:57.307Z,1513251297.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:57.642Z,1513251297.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:57.656Z,1513251297.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:58.047Z,1513251298.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:58.088Z,1513251298.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:58.451Z,1513251298.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:58.471Z,1513251298.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:58.846Z,1513251298.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:58.869Z,1513251298.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:59.257Z,1513251299.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:59.272Z,1513251299.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:34:59.676Z,1513251299.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:34:59.742Z,1513251299.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:00.053Z,1513251300.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:00.071Z,1513251300.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:00.449Z,1513251300.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:00.464Z,1513251300.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:00.847Z,1513251300.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:00.862Z,1513251300.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:01.248Z,1513251301.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:01.264Z,1513251301.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:01.649Z,1513251301.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:01.672Z,1513251301.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:02.048Z,1513251302.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:02.063Z,1513251302.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:02.454Z,1513251302.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:02.468Z,1513251302.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:02.880Z,1513251302.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:02.907Z,1513251302.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:03.259Z,1513251303.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:03.274Z,1513251303.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:03.645Z,1513251303.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:03.660Z,1513251303.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:04.051Z,1513251304.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:04.072Z,1513251304.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:04.452Z,1513251304.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:04.467Z,1513251304.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:04.849Z,1513251304.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:04.871Z,1513251304.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:05.258Z,1513251305.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:05.272Z,1513251305.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:05.656Z,1513251305.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:05.708Z,1513251305.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:06.106Z,1513251306.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:06.124Z,1513251306.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:06.442Z,1513251306.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:06.473Z,1513251306.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:06.860Z,1513251306.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:06.875Z,1513251306.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:07.253Z,1513251307.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:07.268Z,1513251307.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:07.649Z,1513251307.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:07.676Z,1513251307.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:08.038Z,1513251308.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:08.073Z,1513251308.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:08.462Z,1513251308.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:08.478Z,1513251308.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:08.864Z,1513251308.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:08.888Z,1513251308.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:09.268Z,1513251309.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:09.291Z,1513251309.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:09.640Z,1513251309.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:09.672Z,1513251309.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:10.044Z,1513251310.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:10.070Z,1513251310.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:10.440Z,1513251310.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:10.476Z,1513251310.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:10.839Z,1513251310.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:10.880Z,1513251310.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:11.262Z,1513251311.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:11.283Z,1513251311.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:11.664Z,1513251311.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:11.678Z,1513251311.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:12.067Z,1513251312.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:12.081Z,1513251312.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:12.444Z,1513251312.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:12.480Z,1513251312.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:12.848Z,1513251312.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:12.864Z,1513251312.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:13.244Z,1513251313.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:13.263Z,1513251313.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:13.650Z,1513251313.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:13.665Z,1513251313.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:14.043Z,1513251314.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:14.068Z,1513251314.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:14.461Z,1513251314.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:14.490Z,1513251314.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:14.861Z,1513251314.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:14.891Z,1513251314.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:15.258Z,1513251315.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:15.290Z,1513251315.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:15.647Z,1513251315.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:15.664Z,1513251315.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:16.046Z,1513251316.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:16.067Z,1513251316.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:16.448Z,1513251316.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:16.462Z,1513251316.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:16.849Z,1513251316.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:16.858Z,1513251316.858 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T11:35:16.858Z,1513251316.858 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:35:16.858Z,1513251316.858 [BPC1](ERROR): Data Fault
2017-12-14T11:35:16.866Z,1513251316.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:16.907Z,1513251316.907 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:35:17.258Z,1513251317.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:17.279Z,1513251317.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:17.658Z,1513251317.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:17.679Z,1513251317.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:18.057Z,1513251318.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:18.072Z,1513251318.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:18.117Z,1513251318.117 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:35:18.117Z,1513251318.117 [BPC1] No Fault, FailCount= 1
2017-12-14T11:35:18.451Z,1513251318.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:18.519Z,1513251318.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:18.875Z,1513251318.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:18.920Z,1513251318.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:19.249Z,1513251319.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:19.264Z,1513251319.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:19.650Z,1513251319.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:19.665Z,1513251319.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:20.046Z,1513251320.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:20.064Z,1513251320.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:20.458Z,1513251320.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:20.472Z,1513251320.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:20.861Z,1513251320.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:20.883Z,1513251320.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:21.262Z,1513251321.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:21.283Z,1513251321.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:21.653Z,1513251321.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:21.667Z,1513251321.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:22.084Z,1513251322.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:22.115Z,1513251322.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:22.439Z,1513251322.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:22.466Z,1513251322.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:22.839Z,1513251322.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:22.866Z,1513251322.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:23.262Z,1513251323.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:23.283Z,1513251323.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:23.670Z,1513251323.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:23.691Z,1513251323.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:24.064Z,1513251324.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:24.079Z,1513251324.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:24.439Z,1513251324.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:24.473Z,1513251324.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:24.839Z,1513251324.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:24.872Z,1513251324.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:25.243Z,1513251325.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:25.313Z,1513251325.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:25.640Z,1513251325.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:25.671Z,1513251325.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:26.043Z,1513251326.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:26.069Z,1513251326.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:26.463Z,1513251326.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:26.478Z,1513251326.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:26.860Z,1513251326.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:26.919Z,1513251326.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:27.259Z,1513251327.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:27.279Z,1513251327.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:27.639Z,1513251327.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:27.671Z,1513251327.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:28.039Z,1513251328.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:28.164Z,1513251328.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:28.484Z,1513251328.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:28.512Z,1513251328.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:28.845Z,1513251328.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:28.882Z,1513251328.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:29.255Z,1513251329.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:29.270Z,1513251329.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:29.661Z,1513251329.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:29.692Z,1513251329.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:30.061Z,1513251330.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:30.095Z,1513251330.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:30.448Z,1513251330.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:30.463Z,1513251330.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:30.850Z,1513251330.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:30.864Z,1513251330.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:31.250Z,1513251331.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:31.265Z,1513251331.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:31.683Z,1513251331.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:31.779Z,1513251331.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:32.042Z,1513251332.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:32.064Z,1513251332.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:32.462Z,1513251332.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:32.477Z,1513251332.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:32.866Z,1513251332.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:32.881Z,1513251332.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:33.263Z,1513251333.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:33.283Z,1513251333.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:33.654Z,1513251333.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:33.669Z,1513251333.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:34.039Z,1513251334.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:34.056Z,1513251334.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:34.443Z,1513251334.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:34.483Z,1513251334.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:34.847Z,1513251334.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:34.911Z,1513251334.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:35.258Z,1513251335.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:35.280Z,1513251335.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:35.658Z,1513251335.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:35.679Z,1513251335.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:36.058Z,1513251336.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:36.079Z,1513251336.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:36.448Z,1513251336.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:36.464Z,1513251336.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:36.842Z,1513251336.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:36.869Z,1513251336.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:37.254Z,1513251337.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:37.269Z,1513251337.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:37.651Z,1513251337.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:37.671Z,1513251337.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:41.233Z,1513251341.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:41.327Z,1513251341.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:41.431Z,1513251341.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:41.472Z,1513251341.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:41.825Z,1513251341.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:41.848Z,1513251341.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:42.230Z,1513251342.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:42.340Z,1513251342.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:42.610Z,1513251342.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:42.643Z,1513251342.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:43.011Z,1513251343.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:43.068Z,1513251343.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:43.400Z,1513251343.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:43.440Z,1513251343.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:43.814Z,1513251343.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:43.836Z,1513251343.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:44.219Z,1513251344.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:44.268Z,1513251344.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:44.624Z,1513251344.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:44.643Z,1513251344.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:45.022Z,1513251345.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:45.046Z,1513251345.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:45.403Z,1513251345.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:45.437Z,1513251345.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:45.799Z,1513251345.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:45.835Z,1513251345.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:46.203Z,1513251346.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:46.231Z,1513251346.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:46.601Z,1513251346.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:46.703Z,1513251346.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:47.007Z,1513251347.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:47.043Z,1513251347.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:47.421Z,1513251347.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:47.453Z,1513251347.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:47.835Z,1513251347.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:47.858Z,1513251347.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:48.217Z,1513251348.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:48.252Z,1513251348.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:48.602Z,1513251348.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:48.664Z,1513251348.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:49.013Z,1513251349.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:49.028Z,1513251349.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:49.410Z,1513251349.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:49.425Z,1513251349.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:49.799Z,1513251349.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:49.827Z,1513251349.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:50.221Z,1513251350.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:50.240Z,1513251350.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:50.606Z,1513251350.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:50.632Z,1513251350.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:51.038Z,1513251351.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:51.093Z,1513251351.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:51.418Z,1513251351.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:51.452Z,1513251351.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:51.807Z,1513251351.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:51.841Z,1513251351.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:52.206Z,1513251352.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:52.237Z,1513251352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:52.620Z,1513251352.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:52.635Z,1513251352.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:53.003Z,1513251353.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:53.037Z,1513251353.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:53.415Z,1513251353.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:53.446Z,1513251353.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:53.824Z,1513251353.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:53.869Z,1513251353.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:54.229Z,1513251354.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:54.341Z,1513251354.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:54.602Z,1513251354.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:54.649Z,1513251354.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:55.008Z,1513251355.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:55.031Z,1513251355.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:55.414Z,1513251355.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:55.429Z,1513251355.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:55.807Z,1513251355.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:55.824Z,1513251355.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:56.219Z,1513251356.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:56.250Z,1513251356.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:56.621Z,1513251356.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:56.650Z,1513251356.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:57.022Z,1513251357.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:57.063Z,1513251357.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:57.405Z,1513251357.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:57.420Z,1513251357.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:57.809Z,1513251357.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:57.823Z,1513251357.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:58.205Z,1513251358.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:58.227Z,1513251358.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:58.610Z,1513251358.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:58.631Z,1513251358.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:59.008Z,1513251359.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:59.024Z,1513251359.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:59.412Z,1513251359.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:59.436Z,1513251359.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:35:59.820Z,1513251359.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:35:59.839Z,1513251359.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:00.218Z,1513251360.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:00.264Z,1513251360.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:00.673Z,1513251360.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:00.732Z,1513251360.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:00.999Z,1513251360.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:01.041Z,1513251361.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:01.400Z,1513251361.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:01.468Z,1513251361.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:01.803Z,1513251361.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:01.834Z,1513251361.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:02.210Z,1513251362.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:02.247Z,1513251362.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:02.652Z,1513251362.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:02.731Z,1513251362.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:03.014Z,1513251363.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:03.083Z,1513251363.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:03.408Z,1513251363.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:03.451Z,1513251363.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:03.804Z,1513251363.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:03.819Z,1513251363.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:04.199Z,1513251364.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:04.269Z,1513251364.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:04.600Z,1513251364.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:04.633Z,1513251364.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:04.999Z,1513251364.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:05.043Z,1513251365.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:05.423Z,1513251365.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:05.444Z,1513251365.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:05.828Z,1513251365.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:05.849Z,1513251365.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:06.230Z,1513251366.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:06.244Z,1513251366.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:06.599Z,1513251366.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:06.642Z,1513251366.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:06.999Z,1513251366.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:07.034Z,1513251367.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:07.403Z,1513251367.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:07.445Z,1513251367.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:07.799Z,1513251367.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:07.843Z,1513251367.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:08.215Z,1513251368.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:08.241Z,1513251368.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:08.613Z,1513251368.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:08.654Z,1513251368.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:08.655Z,1513251368.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 221
2017-12-14T11:36:08.655Z,1513251368.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:36:08.656Z,1513251368.656 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:08.656Z,1513251368.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 221
2017-12-14T11:36:08.656Z,1513251368.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:36:08.658Z,1513251368.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:08.659Z,1513251368.659 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 221
2017-12-14T11:36:08.659Z,1513251368.659 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:36:08.670Z,1513251368.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:36:08.671Z,1513251368.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:36:08.671Z,1513251368.671 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:36:09.022Z,1513251369.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:09.079Z,1513251369.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:36:09.079Z,1513251369.079 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 221
2017-12-14T11:36:09.079Z,1513251369.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:36:09.079Z,1513251369.079 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 221
2017-12-14T11:36:09.080Z,1513251369.080 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:36:09.080Z,1513251369.080 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 221
2017-12-14T11:36:09.407Z,1513251369.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:09.447Z,1513251369.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:36:09.447Z,1513251369.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:36:09.447Z,1513251369.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:36:09.448Z,1513251369.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:36:09.448Z,1513251369.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:36:09.448Z,1513251369.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:36:09.450Z,1513251369.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:36:09.450Z,1513251369.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:36:09.451Z,1513251369.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:36:09.807Z,1513251369.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:09.822Z,1513251369.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:10.204Z,1513251370.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:10.222Z,1513251370.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:10.626Z,1513251370.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:10.663Z,1513251370.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:10.999Z,1513251370.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:11.032Z,1513251371.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:11.414Z,1513251371.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:11.434Z,1513251371.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:11.825Z,1513251371.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:11.847Z,1513251371.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:12.223Z,1513251372.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:12.245Z,1513251372.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:12.599Z,1513251372.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:12.647Z,1513251372.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:12.999Z,1513251372.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:13.038Z,1513251373.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:13.404Z,1513251373.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:13.453Z,1513251373.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:13.824Z,1513251373.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:13.858Z,1513251373.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:14.209Z,1513251374.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:14.243Z,1513251374.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:14.632Z,1513251374.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:14.685Z,1513251374.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T11:36:14.715Z,1513251374.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:15.026Z,1513251375.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:15.071Z,1513251375.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:15.404Z,1513251375.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:15.438Z,1513251375.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:15.799Z,1513251375.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:15.832Z,1513251375.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:16.196Z,1513251376.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:16.226Z,1513251376.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:16.600Z,1513251376.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:16.703Z,1513251376.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:17.009Z,1513251377.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:17.051Z,1513251377.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:17.410Z,1513251377.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:17.432Z,1513251377.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:17.813Z,1513251377.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:17.828Z,1513251377.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:18.216Z,1513251378.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:18.259Z,1513251378.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:18.609Z,1513251378.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:18.659Z,1513251378.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:19.015Z,1513251379.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:19.065Z,1513251379.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:19.411Z,1513251379.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:19.436Z,1513251379.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:19.811Z,1513251379.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:19.831Z,1513251379.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:20.241Z,1513251380.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:20.350Z,1513251380.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:20.681Z,1513251380.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:20.720Z,1513251380.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:21.024Z,1513251381.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:21.070Z,1513251381.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:21.426Z,1513251381.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:21.482Z,1513251381.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:21.805Z,1513251381.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:21.854Z,1513251381.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:22.209Z,1513251382.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:22.335Z,1513251382.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:22.635Z,1513251382.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:22.684Z,1513251382.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:23.046Z,1513251383.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:23.111Z,1513251383.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:23.412Z,1513251383.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:23.455Z,1513251383.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:23.847Z,1513251383.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:23.893Z,1513251383.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:24.218Z,1513251384.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:24.346Z,1513251384.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:24.616Z,1513251384.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:24.669Z,1513251384.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:25.009Z,1513251385.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:25.066Z,1513251385.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:25.410Z,1513251385.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:25.467Z,1513251385.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:25.795Z,1513251385.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:25.841Z,1513251385.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:26.220Z,1513251386.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:26.294Z,1513251386.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:26.621Z,1513251386.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:26.663Z,1513251386.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:27.026Z,1513251387.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:27.033Z,1513251387.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x26172 got:0x7490
2017-12-14T11:36:27.088Z,1513251387.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:27.431Z,1513251387.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:27.482Z,1513251387.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:27.811Z,1513251387.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:27.827Z,1513251387.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:28.199Z,1513251388.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:28.249Z,1513251388.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:28.599Z,1513251388.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:28.718Z,1513251388.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:29.024Z,1513251389.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:29.062Z,1513251389.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:29.415Z,1513251389.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:29.486Z,1513251389.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:29.848Z,1513251389.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:29.867Z,1513251389.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:30.219Z,1513251390.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:30.239Z,1513251390.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:30.643Z,1513251390.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:30.738Z,1513251390.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:31.010Z,1513251391.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:31.063Z,1513251391.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:31.411Z,1513251391.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:31.459Z,1513251391.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:31.811Z,1513251391.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:31.839Z,1513251391.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:32.221Z,1513251392.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:32.347Z,1513251392.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:32.627Z,1513251392.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:32.715Z,1513251392.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:33.012Z,1513251393.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:33.065Z,1513251393.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:33.399Z,1513251393.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:33.447Z,1513251393.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:33.851Z,1513251393.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:33.904Z,1513251393.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:34.203Z,1513251394.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:34.311Z,1513251394.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:34.622Z,1513251394.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:34.668Z,1513251394.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:35.012Z,1513251395.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:35.068Z,1513251395.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:35.420Z,1513251395.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:35.479Z,1513251395.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:35.823Z,1513251395.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:35.882Z,1513251395.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:36.223Z,1513251396.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:36.331Z,1513251396.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:36.603Z,1513251396.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:36.647Z,1513251396.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:37.020Z,1513251397.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:37.081Z,1513251397.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:37.405Z,1513251397.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:37.477Z,1513251397.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:37.489Z,1513251397.489 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:31:37.4Z
2017-12-14T11:36:37.489Z,1513251397.489 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:36:37.489Z,1513251397.489 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:36:37.803Z,1513251397.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:37.856Z,1513251397.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:45.887Z,1513251405.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:45.944Z,1513251405.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:46.018Z,1513251406.018 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171214T002839/Courier0256.lzma
2017-12-14T11:36:46.069Z,1513251406.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:46.154Z,1513251406.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:46.441Z,1513251406.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:46.467Z,1513251406.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:46.776Z,1513251406.776 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0256.lzma.bak
2017-12-14T11:36:46.776Z,1513251406.776 [DataOverHttps](INFO): SBD MOMSN=5438655
2017-12-14T11:36:46.823Z,1513251406.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:46.856Z,1513251406.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:49.134Z,1513251409.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:49.184Z,1513251409.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:49.298Z,1513251409.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:49.331Z,1513251409.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:52.807Z,1513251412.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:52.877Z,1513251412.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:52.980Z,1513251412.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:53.020Z,1513251413.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:53.339Z,1513251413.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:53.392Z,1513251413.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:53.736Z,1513251413.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:53.760Z,1513251413.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:54.123Z,1513251414.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:54.163Z,1513251414.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:54.523Z,1513251414.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:54.559Z,1513251414.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:58.026Z,1513251418.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:58.041Z,1513251418.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:58.121Z,1513251418.121 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0257.lzma
2017-12-14T11:36:58.158Z,1513251418.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:58.184Z,1513251418.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:58.542Z,1513251418.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:58.571Z,1513251418.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:36:58.899Z,1513251418.899 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0257.lzma.bak
2017-12-14T11:36:58.900Z,1513251418.900 [DataOverHttps](INFO): SBD MOMSN=5438658
2017-12-14T11:36:58.938Z,1513251418.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:36:58.960Z,1513251418.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:23.774Z,1513251443.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:23.834Z,1513251443.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:23.844Z,1513251443.844 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:37:23.844Z,1513251443.844 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:37:23.844Z,1513251443.844 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:37:23.936Z,1513251443.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:23.953Z,1513251443.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:25.418Z,1513251445.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:25.821Z,1513251445.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:26.226Z,1513251446.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:27.729Z,1513251447.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:27.744Z,1513251447.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:27.865Z,1513251447.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:27.880Z,1513251447.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:28.237Z,1513251448.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:28.343Z,1513251448.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:28.623Z,1513251448.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:28.644Z,1513251448.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:29.039Z,1513251449.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:29.095Z,1513251449.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:29.424Z,1513251449.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:29.452Z,1513251449.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:29.819Z,1513251449.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:29.860Z,1513251449.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:30.247Z,1513251450.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:30.262Z,1513251450.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:30.638Z,1513251450.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:30.679Z,1513251450.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:31.039Z,1513251451.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:31.066Z,1513251451.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:31.427Z,1513251451.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:31.472Z,1513251451.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:31.827Z,1513251451.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:31.851Z,1513251451.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:32.233Z,1513251452.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:32.249Z,1513251452.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:32.633Z,1513251452.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:32.660Z,1513251452.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:33.033Z,1513251453.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:33.078Z,1513251453.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:33.445Z,1513251453.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:33.460Z,1513251453.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:33.847Z,1513251453.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:33.892Z,1513251453.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:34.241Z,1513251454.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:34.341Z,1513251454.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:34.626Z,1513251454.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:34.667Z,1513251454.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:35.024Z,1513251455.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:35.069Z,1513251455.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:35.435Z,1513251455.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:35.471Z,1513251455.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:35.834Z,1513251455.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:35.896Z,1513251455.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:36.230Z,1513251456.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:36.278Z,1513251456.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:36.655Z,1513251456.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:36.695Z,1513251456.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:37.042Z,1513251457.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:37.079Z,1513251457.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:37.440Z,1513251457.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:37.459Z,1513251457.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:37.834Z,1513251457.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:37.895Z,1513251457.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:38.232Z,1513251458.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:38.255Z,1513251458.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:38.675Z,1513251458.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:38.702Z,1513251458.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:39.028Z,1513251459.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:39.059Z,1513251459.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:39.433Z,1513251459.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:39.471Z,1513251459.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:39.829Z,1513251459.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:39.849Z,1513251459.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x37076 got:0x442
2017-12-14T11:37:39.868Z,1513251459.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:40.246Z,1513251460.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:40.267Z,1513251460.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:40.688Z,1513251460.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:40.718Z,1513251460.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:41.023Z,1513251461.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:41.063Z,1513251461.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:41.478Z,1513251461.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:41.505Z,1513251461.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:41.846Z,1513251461.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:41.860Z,1513251461.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:42.237Z,1513251462.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:42.295Z,1513251462.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:42.635Z,1513251462.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:42.675Z,1513251462.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:43.035Z,1513251463.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:43.056Z,1513251463.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:43.419Z,1513251463.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:43.473Z,1513251463.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:43.833Z,1513251463.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:43.840Z,1513251463.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x34665 got:0x7233
2017-12-14T11:37:43.879Z,1513251463.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:44.229Z,1513251464.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:44.260Z,1513251464.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:44.657Z,1513251464.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:44.708Z,1513251464.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:45.030Z,1513251465.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:45.049Z,1513251465.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:45.443Z,1513251465.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:45.477Z,1513251465.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:45.828Z,1513251465.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:45.870Z,1513251465.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:46.229Z,1513251466.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:46.336Z,1513251466.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:46.619Z,1513251466.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:46.661Z,1513251466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:47.032Z,1513251467.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:47.056Z,1513251467.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:47.433Z,1513251467.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:47.472Z,1513251467.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:47.827Z,1513251467.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:47.866Z,1513251467.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x22332 got:0x16896
2017-12-14T11:37:47.903Z,1513251467.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:48.252Z,1513251468.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:48.319Z,1513251468.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:48.639Z,1513251468.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:48.660Z,1513251468.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:49.037Z,1513251469.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:49.067Z,1513251469.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:49.427Z,1513251469.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:49.467Z,1513251469.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:49.831Z,1513251469.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:49.863Z,1513251469.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:50.229Z,1513251470.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:50.261Z,1513251470.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:50.626Z,1513251470.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:50.674Z,1513251470.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:51.062Z,1513251471.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:51.115Z,1513251471.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:51.443Z,1513251471.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:51.467Z,1513251471.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:51.842Z,1513251471.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:51.953Z,1513251471.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:52.241Z,1513251472.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:52.279Z,1513251472.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:52.669Z,1513251472.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:52.719Z,1513251472.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:53.023Z,1513251473.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:53.058Z,1513251473.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:53.421Z,1513251473.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:53.450Z,1513251473.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:53.823Z,1513251473.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:53.867Z,1513251473.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:54.248Z,1513251474.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:54.267Z,1513251474.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:54.698Z,1513251474.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:54.716Z,1513251474.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:55.050Z,1513251475.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:55.067Z,1513251475.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:55.423Z,1513251475.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:55.475Z,1513251475.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:55.829Z,1513251475.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:55.850Z,1513251475.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:56.226Z,1513251476.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:56.247Z,1513251476.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:56.628Z,1513251476.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:56.654Z,1513251476.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:57.019Z,1513251477.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:57.066Z,1513251477.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:57.449Z,1513251477.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:57.473Z,1513251477.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:57.839Z,1513251477.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:57.863Z,1513251477.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:58.238Z,1513251478.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:58.329Z,1513251478.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:58.628Z,1513251478.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:58.669Z,1513251478.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:59.029Z,1513251479.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:59.051Z,1513251479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:59.430Z,1513251479.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:59.449Z,1513251479.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:37:59.836Z,1513251479.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:37:59.850Z,1513251479.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:00.233Z,1513251480.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:00.346Z,1513251480.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:00.646Z,1513251480.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:00.660Z,1513251480.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:01.043Z,1513251481.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:01.071Z,1513251481.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:01.413Z,1513251481.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:01.434Z,1513251481.434 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:38:01.434Z,1513251481.434 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:38:01.434Z,1513251481.434 [BPC1](ERROR): Communications Fault
2017-12-14T11:38:01.450Z,1513251481.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:01.488Z,1513251481.488 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:38:01.818Z,1513251481.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:01.860Z,1513251481.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:02.223Z,1513251482.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:02.307Z,1513251482.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:02.622Z,1513251482.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:02.661Z,1513251482.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:02.686Z,1513251482.686 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:38:02.686Z,1513251482.686 [BPC1] No Fault, FailCount= 1
2017-12-14T11:38:03.033Z,1513251483.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:03.128Z,1513251483.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:03.434Z,1513251483.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:03.475Z,1513251483.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:03.833Z,1513251483.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:03.867Z,1513251483.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:04.241Z,1513251484.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:04.268Z,1513251484.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:04.659Z,1513251484.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:04.718Z,1513251484.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:05.019Z,1513251485.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:05.060Z,1513251485.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:05.419Z,1513251485.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:05.447Z,1513251485.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:05.820Z,1513251485.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:05.880Z,1513251485.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:06.236Z,1513251486.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:06.262Z,1513251486.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:06.665Z,1513251486.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:06.708Z,1513251486.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:07.041Z,1513251487.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:07.068Z,1513251487.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:07.426Z,1513251487.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:07.447Z,1513251487.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:07.866Z,1513251487.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:07.931Z,1513251487.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:08.225Z,1513251488.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:08.271Z,1513251488.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:08.688Z,1513251488.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:08.746Z,1513251488.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:09.033Z,1513251489.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:09.049Z,1513251489.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:09.473Z,1513251489.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:09.488Z,1513251489.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:09.830Z,1513251489.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:09.870Z,1513251489.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:10.229Z,1513251490.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:10.255Z,1513251490.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:10.623Z,1513251490.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:10.658Z,1513251490.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:11.042Z,1513251491.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:11.070Z,1513251491.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:11.419Z,1513251491.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:11.494Z,1513251491.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:11.822Z,1513251491.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:11.854Z,1513251491.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:12.236Z,1513251492.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:12.263Z,1513251492.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:12.641Z,1513251492.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:12.663Z,1513251492.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:13.070Z,1513251493.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:13.085Z,1513251493.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:13.426Z,1513251493.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:13.466Z,1513251493.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:13.834Z,1513251493.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:13.849Z,1513251493.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:14.227Z,1513251494.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:14.258Z,1513251494.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:14.628Z,1513251494.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:14.670Z,1513251494.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:15.040Z,1513251495.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:15.059Z,1513251495.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:15.442Z,1513251495.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:15.464Z,1513251495.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:15.876Z,1513251495.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:15.891Z,1513251495.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:16.239Z,1513251496.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:16.334Z,1513251496.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:16.631Z,1513251496.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:16.646Z,1513251496.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x6144 got:0x57279
2017-12-14T11:38:16.696Z,1513251496.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:17.036Z,1513251497.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:17.051Z,1513251497.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:17.433Z,1513251497.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:17.449Z,1513251497.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:17.824Z,1513251497.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:17.867Z,1513251497.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:18.253Z,1513251498.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:18.267Z,1513251498.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:18.654Z,1513251498.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:18.674Z,1513251498.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:19.054Z,1513251499.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:19.068Z,1513251499.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:19.475Z,1513251499.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:19.490Z,1513251499.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:19.828Z,1513251499.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:19.862Z,1513251499.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:20.224Z,1513251500.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:20.262Z,1513251500.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:20.722Z,1513251500.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:20.770Z,1513251500.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:21.029Z,1513251501.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:21.078Z,1513251501.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:21.463Z,1513251501.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:21.483Z,1513251501.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:21.845Z,1513251501.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:21.896Z,1513251501.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:22.237Z,1513251502.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:22.266Z,1513251502.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:22.655Z,1513251502.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:22.691Z,1513251502.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:23.030Z,1513251503.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:23.067Z,1513251503.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:23.438Z,1513251503.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:23.444Z,1513251503.444 [PNI_TCM](ERROR): CRC does not match. Expected:0x51784 got:0x53604
2017-12-14T11:38:23.493Z,1513251503.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:23.827Z,1513251503.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:23.856Z,1513251503.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:24.242Z,1513251504.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:24.332Z,1513251504.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:27.855Z,1513251507.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:27.875Z,1513251507.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:27.996Z,1513251507.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:28.042Z,1513251508.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:28.376Z,1513251508.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:28.412Z,1513251508.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:28.764Z,1513251508.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:28.783Z,1513251508.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:29.152Z,1513251509.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:29.180Z,1513251509.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:29.550Z,1513251509.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:29.577Z,1513251509.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:29.967Z,1513251509.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:29.982Z,1513251509.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:30.404Z,1513251510.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:30.442Z,1513251510.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:30.785Z,1513251510.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:30.800Z,1513251510.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:31.176Z,1513251511.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:31.191Z,1513251511.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:31.556Z,1513251511.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:31.580Z,1513251511.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:31.958Z,1513251511.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:31.972Z,1513251511.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:32.413Z,1513251512.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:32.479Z,1513251512.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:32.760Z,1513251512.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:32.776Z,1513251512.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:33.182Z,1513251513.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:33.219Z,1513251513.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:33.608Z,1513251513.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:33.639Z,1513251513.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:33.966Z,1513251513.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:33.989Z,1513251513.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:34.352Z,1513251514.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:34.378Z,1513251514.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:34.749Z,1513251514.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:34.776Z,1513251514.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:35.159Z,1513251515.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:35.182Z,1513251515.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:35.570Z,1513251515.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:35.585Z,1513251515.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:35.971Z,1513251515.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:35.985Z,1513251515.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:36.352Z,1513251516.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:36.378Z,1513251516.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:36.751Z,1513251516.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:36.832Z,1513251516.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:37.165Z,1513251517.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:37.187Z,1513251517.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:37.566Z,1513251517.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:37.581Z,1513251517.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:37.962Z,1513251517.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:37.996Z,1513251517.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:38.372Z,1513251518.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:38.396Z,1513251518.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:38.749Z,1513251518.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:38.787Z,1513251518.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:39.172Z,1513251519.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:39.186Z,1513251519.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:39.570Z,1513251519.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:39.592Z,1513251519.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:39.973Z,1513251519.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:39.988Z,1513251519.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:40.381Z,1513251520.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:40.399Z,1513251520.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:40.750Z,1513251520.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:40.797Z,1513251520.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:41.183Z,1513251521.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:41.198Z,1513251521.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:41.573Z,1513251521.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:41.587Z,1513251521.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:41.977Z,1513251521.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:42.007Z,1513251522.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:42.364Z,1513251522.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:42.405Z,1513251522.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:42.754Z,1513251522.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:42.778Z,1513251522.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:43.162Z,1513251523.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:43.226Z,1513251523.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:43.559Z,1513251523.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:43.583Z,1513251523.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:43.963Z,1513251523.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:43.987Z,1513251523.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:44.396Z,1513251524.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:44.432Z,1513251524.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:44.771Z,1513251524.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:44.791Z,1513251524.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:45.171Z,1513251525.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:45.191Z,1513251525.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:45.561Z,1513251525.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:45.614Z,1513251525.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:45.944Z,1513251525.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:45.980Z,1513251525.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:46.421Z,1513251526.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:46.465Z,1513251526.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:46.749Z,1513251526.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:46.776Z,1513251526.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:47.176Z,1513251527.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:47.199Z,1513251527.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:47.570Z,1513251527.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:47.591Z,1513251527.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:47.971Z,1513251527.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:47.985Z,1513251527.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:48.352Z,1513251528.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:48.378Z,1513251528.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:48.749Z,1513251528.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:48.783Z,1513251528.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:49.171Z,1513251529.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:49.189Z,1513251529.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:49.575Z,1513251529.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:49.589Z,1513251529.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:49.866Z,1513251529.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:49.970Z,1513251529.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:49.992Z,1513251529.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:50.370Z,1513251530.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:50.432Z,1513251530.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:50.663Z,1513251530.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:50.748Z,1513251530.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:50.779Z,1513251530.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:51.073Z,1513251531.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:51.171Z,1513251531.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:51.186Z,1513251531.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:51.575Z,1513251531.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:51.589Z,1513251531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:51.870Z,1513251531.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:51.972Z,1513251531.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:51.987Z,1513251531.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:52.375Z,1513251532.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:52.399Z,1513251532.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:52.665Z,1513251532.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:52.748Z,1513251532.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:52.782Z,1513251532.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:53.069Z,1513251533.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:53.176Z,1513251533.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:53.191Z,1513251533.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:53.581Z,1513251533.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:53.635Z,1513251533.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:53.865Z,1513251533.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:53.974Z,1513251533.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:53.988Z,1513251533.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:54.377Z,1513251534.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:54.394Z,1513251534.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:54.664Z,1513251534.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:54.748Z,1513251534.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:54.799Z,1513251534.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:55.069Z,1513251535.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:55.175Z,1513251535.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:55.190Z,1513251535.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:55.574Z,1513251535.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:55.589Z,1513251535.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:55.869Z,1513251535.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:55.959Z,1513251535.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:55.986Z,1513251535.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:56.384Z,1513251536.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:56.399Z,1513251536.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:56.668Z,1513251536.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:56.789Z,1513251536.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:56.816Z,1513251536.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:57.073Z,1513251537.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:57.184Z,1513251537.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:57.200Z,1513251537.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:57.569Z,1513251537.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:57.597Z,1513251537.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:57.870Z,1513251537.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:58.018Z,1513251538.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:58.055Z,1513251538.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:58.367Z,1513251538.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:58.390Z,1513251538.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:58.665Z,1513251538.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:58.758Z,1513251538.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:58.781Z,1513251538.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:59.069Z,1513251539.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:59.157Z,1513251539.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:59.172Z,1513251539.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:59.559Z,1513251539.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:38:59.579Z,1513251539.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:38:59.865Z,1513251539.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:00.006Z,1513251540.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:00.021Z,1513251540.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:00.411Z,1513251540.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:00.443Z,1513251540.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:00.662Z,1513251540.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:00.767Z,1513251540.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:00.790Z,1513251540.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:01.065Z,1513251541.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:01.177Z,1513251541.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:01.192Z,1513251541.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:01.551Z,1513251541.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:01.582Z,1513251541.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:01.863Z,1513251541.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:01.953Z,1513251541.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:01.980Z,1513251541.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:02.352Z,1513251542.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:02.387Z,1513251542.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:02.659Z,1513251542.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:02.764Z,1513251542.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:02.789Z,1513251542.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:03.072Z,1513251543.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:03.208Z,1513251543.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:03.235Z,1513251543.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:03.567Z,1513251543.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:03.583Z,1513251543.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:03.865Z,1513251543.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:03.967Z,1513251543.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:03.982Z,1513251543.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:04.366Z,1513251544.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:04.387Z,1513251544.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:04.663Z,1513251544.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:04.756Z,1513251544.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:04.783Z,1513251544.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:05.073Z,1513251545.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:05.172Z,1513251545.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:05.191Z,1513251545.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:05.570Z,1513251545.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:05.620Z,1513251545.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:05.870Z,1513251545.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:05.968Z,1513251545.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:05.995Z,1513251545.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:06.388Z,1513251546.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:06.483Z,1513251546.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:06.665Z,1513251546.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:06.748Z,1513251546.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:06.771Z,1513251546.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:07.069Z,1513251547.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:07.177Z,1513251547.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:07.191Z,1513251547.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:07.577Z,1513251547.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:07.630Z,1513251547.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:07.866Z,1513251547.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:07.962Z,1513251547.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:07.995Z,1513251547.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:08.391Z,1513251548.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:08.475Z,1513251548.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:08.663Z,1513251548.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:08.753Z,1513251548.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:08.785Z,1513251548.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:09.066Z,1513251549.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:09.158Z,1513251549.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:09.196Z,1513251549.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:09.576Z,1513251549.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:09.631Z,1513251549.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:09.631Z,1513251549.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 222
2017-12-14T11:39:09.631Z,1513251549.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:39:09.633Z,1513251549.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:09.633Z,1513251549.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 222
2017-12-14T11:39:09.633Z,1513251549.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:39:09.635Z,1513251549.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:09.635Z,1513251549.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 222
2017-12-14T11:39:09.635Z,1513251549.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:39:09.656Z,1513251549.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:39:09.656Z,1513251549.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:39:09.656Z,1513251549.656 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:39:09.861Z,1513251549.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:09.970Z,1513251549.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:10.014Z,1513251550.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:39:10.014Z,1513251550.014 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 222
2017-12-14T11:39:10.014Z,1513251550.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:39:10.014Z,1513251550.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 222
2017-12-14T11:39:10.015Z,1513251550.015 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:39:10.015Z,1513251550.015 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 222
2017-12-14T11:39:10.363Z,1513251550.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:10.405Z,1513251550.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:39:10.405Z,1513251550.405 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:39:10.405Z,1513251550.405 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:39:10.406Z,1513251550.406 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:39:10.406Z,1513251550.406 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:39:10.407Z,1513251550.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:39:10.407Z,1513251550.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:39:10.407Z,1513251550.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:39:10.408Z,1513251550.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:39:10.657Z,1513251550.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:10.756Z,1513251550.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:10.776Z,1513251550.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:11.061Z,1513251551.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:11.170Z,1513251551.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:11.200Z,1513251551.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:11.565Z,1513251551.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:11.580Z,1513251551.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:11.857Z,1513251551.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:11.968Z,1513251551.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:11.982Z,1513251551.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:12.373Z,1513251552.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:12.409Z,1513251552.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:12.653Z,1513251552.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:12.752Z,1513251552.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:12.774Z,1513251552.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:13.057Z,1513251553.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:13.166Z,1513251553.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:13.181Z,1513251553.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:13.562Z,1513251553.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:13.596Z,1513251553.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:13.855Z,1513251553.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:13.966Z,1513251553.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:13.992Z,1513251553.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:14.407Z,1513251554.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:14.440Z,1513251554.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:14.649Z,1513251554.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:14.747Z,1513251554.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:14.787Z,1513251554.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:15.053Z,1513251555.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:15.166Z,1513251555.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:15.192Z,1513251555.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:15.205Z,1513251555.205 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:39:15.565Z,1513251555.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:15.588Z,1513251555.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:15.849Z,1513251555.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:15.988Z,1513251555.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:16.015Z,1513251556.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:16.358Z,1513251556.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:16.385Z,1513251556.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:16.647Z,1513251556.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:16.764Z,1513251556.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:16.815Z,1513251556.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:17.069Z,1513251557.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:17.156Z,1513251557.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:17.171Z,1513251557.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:17.554Z,1513251557.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:17.575Z,1513251557.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:17.865Z,1513251557.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:17.956Z,1513251557.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:17.970Z,1513251557.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:18.369Z,1513251558.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:18.400Z,1513251558.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:18.663Z,1513251558.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:18.764Z,1513251558.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:18.802Z,1513251558.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:19.081Z,1513251559.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:19.211Z,1513251559.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:19.252Z,1513251559.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:19.546Z,1513251559.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:19.561Z,1513251559.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:19.879Z,1513251559.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:19.956Z,1513251559.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:19.984Z,1513251559.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:20.373Z,1513251560.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:20.401Z,1513251560.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:20.673Z,1513251560.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:20.755Z,1513251560.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:20.783Z,1513251560.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:21.077Z,1513251561.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:21.162Z,1513251561.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:21.183Z,1513251561.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:21.566Z,1513251561.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:21.580Z,1513251561.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:21.874Z,1513251561.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:21.963Z,1513251561.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:21.978Z,1513251561.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:22.375Z,1513251562.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:22.410Z,1513251562.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:22.670Z,1513251562.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:22.751Z,1513251562.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:22.786Z,1513251562.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:23.073Z,1513251563.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:23.167Z,1513251563.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:23.182Z,1513251563.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:23.566Z,1513251563.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:23.591Z,1513251563.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:23.869Z,1513251563.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:23.976Z,1513251563.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:23.991Z,1513251563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:24.374Z,1513251564.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:24.398Z,1513251564.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:24.665Z,1513251564.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:25.069Z,1513251565.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:25.866Z,1513251565.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:26.661Z,1513251566.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:27.065Z,1513251567.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:27.862Z,1513251567.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:27.896Z,1513251567.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:27.948Z,1513251567.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:28.075Z,1513251568.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:28.120Z,1513251568.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:28.465Z,1513251568.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:28.480Z,1513251568.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:28.660Z,1513251568.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:28.854Z,1513251568.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:28.900Z,1513251568.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:29.065Z,1513251569.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:29.235Z,1513251569.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:29.275Z,1513251569.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:29.638Z,1513251569.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:29.699Z,1513251569.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:29.863Z,1513251569.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:30.038Z,1513251570.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:30.052Z,1513251570.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:30.438Z,1513251570.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:30.486Z,1513251570.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:30.659Z,1513251570.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:30.858Z,1513251570.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:30.887Z,1513251570.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:31.077Z,1513251571.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:31.251Z,1513251571.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:31.280Z,1513251571.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:31.629Z,1513251571.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:31.644Z,1513251571.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:31.874Z,1513251571.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:32.037Z,1513251572.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:32.052Z,1513251572.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:32.445Z,1513251572.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:32.460Z,1513251572.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:32.671Z,1513251572.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:32.833Z,1513251572.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:32.860Z,1513251572.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:33.077Z,1513251573.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:33.246Z,1513251573.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:33.260Z,1513251573.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:33.646Z,1513251573.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:33.660Z,1513251573.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:33.873Z,1513251573.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:34.042Z,1513251574.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:34.058Z,1513251574.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:34.440Z,1513251574.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:34.459Z,1513251574.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:34.670Z,1513251574.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:34.830Z,1513251574.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:34.863Z,1513251574.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:35.073Z,1513251575.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:35.225Z,1513251575.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:35.252Z,1513251575.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:35.649Z,1513251575.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:35.664Z,1513251575.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:35.869Z,1513251575.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:36.028Z,1513251576.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:36.054Z,1513251576.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:36.462Z,1513251576.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:36.477Z,1513251576.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:36.666Z,1513251576.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:36.846Z,1513251576.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:36.869Z,1513251576.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:37.069Z,1513251577.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:37.249Z,1513251577.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:37.264Z,1513251577.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:37.631Z,1513251577.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:37.656Z,1513251577.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:37.866Z,1513251577.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:38.031Z,1513251578.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:38.057Z,1513251578.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:38.429Z,1513251578.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:38.460Z,1513251578.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:38.662Z,1513251578.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:38.827Z,1513251578.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:38.883Z,1513251578.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:39.065Z,1513251579.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:39.246Z,1513251579.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:39.262Z,1513251579.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:39.651Z,1513251579.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:39.671Z,1513251579.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:39.862Z,1513251579.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:40.050Z,1513251580.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:40.064Z,1513251580.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:40.427Z,1513251580.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:40.453Z,1513251580.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:40.657Z,1513251580.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:40.851Z,1513251580.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:40.871Z,1513251580.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:41.061Z,1513251581.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:41.227Z,1513251581.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:41.259Z,1513251581.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:41.632Z,1513251581.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:41.698Z,1513251581.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:41.858Z,1513251581.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:42.027Z,1513251582.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:42.041Z,1513251582.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:42.438Z,1513251582.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:42.465Z,1513251582.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:42.654Z,1513251582.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:42.872Z,1513251582.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:42.891Z,1513251582.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:43.244Z,1513251583.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:43.246Z,1513251583.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:43.275Z,1513251583.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:43.626Z,1513251583.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:43.663Z,1513251583.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:44.036Z,1513251584.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:44.038Z,1513251584.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:44.059Z,1513251584.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:44.441Z,1513251584.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:44.455Z,1513251584.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:44.834Z,1513251584.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:44.840Z,1513251584.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:44.855Z,1513251584.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:45.237Z,1513251585.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:45.241Z,1513251585.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:45.256Z,1513251585.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:45.641Z,1513251585.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:45.657Z,1513251585.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:46.034Z,1513251586.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:46.042Z,1513251586.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:46.064Z,1513251586.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:46.440Z,1513251586.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:46.455Z,1513251586.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:46.829Z,1513251586.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:46.839Z,1513251586.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:46.867Z,1513251586.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:47.233Z,1513251587.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:47.242Z,1513251587.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:47.257Z,1513251587.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:47.639Z,1513251587.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:47.654Z,1513251587.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:48.029Z,1513251588.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:48.038Z,1513251588.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:48.061Z,1513251588.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:48.447Z,1513251588.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:48.463Z,1513251588.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:48.717Z,1513251588.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:48.852Z,1513251588.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:48.871Z,1513251588.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:49.255Z,1513251589.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:49.314Z,1513251589.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:49.513Z,1513251589.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:49.639Z,1513251589.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:49.660Z,1513251589.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:50.040Z,1513251590.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:50.056Z,1513251590.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:50.311Z,1513251590.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:50.442Z,1513251590.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:50.456Z,1513251590.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:50.721Z,1513251590.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:50.842Z,1513251590.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:50.914Z,1513251590.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:51.252Z,1513251591.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:51.267Z,1513251591.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:51.517Z,1513251591.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:51.652Z,1513251591.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:51.695Z,1513251591.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:52.048Z,1513251592.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:52.103Z,1513251592.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:52.315Z,1513251592.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:52.427Z,1513251592.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:52.491Z,1513251592.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:52.725Z,1513251592.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:52.832Z,1513251592.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:52.859Z,1513251592.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:53.227Z,1513251593.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:53.259Z,1513251593.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:53.522Z,1513251593.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:53.627Z,1513251593.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:53.658Z,1513251593.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:54.028Z,1513251594.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:54.067Z,1513251594.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:54.319Z,1513251594.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:54.466Z,1513251594.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:54.480Z,1513251594.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:54.729Z,1513251594.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:54.858Z,1513251594.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:54.879Z,1513251594.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:55.272Z,1513251595.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:55.322Z,1513251595.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:55.525Z,1513251595.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:55.628Z,1513251595.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:55.655Z,1513251595.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:56.035Z,1513251596.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:56.050Z,1513251596.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:56.323Z,1513251596.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:56.433Z,1513251596.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:56.464Z,1513251596.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:56.761Z,1513251596.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:56.837Z,1513251596.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:56.859Z,1513251596.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:57.242Z,1513251597.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:57.261Z,1513251597.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:57.557Z,1513251597.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:57.645Z,1513251597.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:57.660Z,1513251597.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:58.042Z,1513251598.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:58.083Z,1513251598.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:58.353Z,1513251598.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:58.465Z,1513251598.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:58.504Z,1513251598.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:58.837Z,1513251598.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:58.859Z,1513251598.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:59.074Z,1513251599.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:59.233Z,1513251599.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:59.252Z,1513251599.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:59.642Z,1513251599.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:39:59.656Z,1513251599.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:39:59.869Z,1513251599.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:00.040Z,1513251600.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:00.056Z,1513251600.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:00.442Z,1513251600.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:00.473Z,1513251600.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:00.671Z,1513251600.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:00.841Z,1513251600.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:00.901Z,1513251600.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:01.077Z,1513251601.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:01.242Z,1513251601.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:01.279Z,1513251601.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:01.629Z,1513251601.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:01.644Z,1513251601.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:01.874Z,1513251601.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:02.037Z,1513251602.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:02.051Z,1513251602.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:02.440Z,1513251602.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:02.476Z,1513251602.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:02.669Z,1513251602.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:02.838Z,1513251602.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:02.865Z,1513251602.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:03.073Z,1513251603.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:03.249Z,1513251603.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:03.277Z,1513251603.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:03.645Z,1513251603.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:03.677Z,1513251603.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:03.870Z,1513251603.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:04.046Z,1513251604.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:04.077Z,1513251604.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:04.437Z,1513251604.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:04.451Z,1513251604.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:04.665Z,1513251604.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:04.880Z,1513251604.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:04.931Z,1513251604.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:05.069Z,1513251605.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:05.232Z,1513251605.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:05.247Z,1513251605.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:05.636Z,1513251605.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:05.650Z,1513251605.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:05.866Z,1513251605.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:06.033Z,1513251606.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:06.048Z,1513251606.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:06.438Z,1513251606.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:06.453Z,1513251606.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:06.664Z,1513251606.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:06.850Z,1513251606.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:06.876Z,1513251606.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:07.069Z,1513251607.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:07.250Z,1513251607.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:07.287Z,1513251607.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:07.637Z,1513251607.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:07.652Z,1513251607.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:07.868Z,1513251607.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:08.067Z,1513251608.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:08.095Z,1513251608.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:08.428Z,1513251608.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:08.460Z,1513251608.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:08.661Z,1513251608.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:08.827Z,1513251608.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:08.863Z,1513251608.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:09.065Z,1513251609.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:09.239Z,1513251609.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:09.275Z,1513251609.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:09.658Z,1513251609.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:09.672Z,1513251609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:09.862Z,1513251609.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:10.038Z,1513251610.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:10.068Z,1513251610.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:10.427Z,1513251610.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:10.466Z,1513251610.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:10.657Z,1513251610.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:10.827Z,1513251610.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:10.864Z,1513251610.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:11.061Z,1513251611.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:11.270Z,1513251611.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:11.314Z,1513251611.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:11.644Z,1513251611.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:11.695Z,1513251611.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:11.858Z,1513251611.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:12.032Z,1513251612.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:12.068Z,1513251612.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:12.446Z,1513251612.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:12.475Z,1513251612.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:12.655Z,1513251612.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:12.857Z,1513251612.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:12.872Z,1513251612.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:13.061Z,1513251613.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:13.246Z,1513251613.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:13.288Z,1513251613.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:13.628Z,1513251613.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:13.647Z,1513251613.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:13.859Z,1513251613.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:14.046Z,1513251614.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:14.060Z,1513251614.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:14.471Z,1513251614.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:14.542Z,1513251614.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:14.655Z,1513251614.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:14.836Z,1513251614.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:14.863Z,1513251614.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:15.081Z,1513251615.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:15.241Z,1513251615.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:15.294Z,1513251615.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:15.646Z,1513251615.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:15.660Z,1513251615.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:15.877Z,1513251615.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:16.040Z,1513251616.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:16.056Z,1513251616.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:16.444Z,1513251616.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:16.459Z,1513251616.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:16.673Z,1513251616.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:16.834Z,1513251616.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:16.855Z,1513251616.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:17.077Z,1513251617.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:17.240Z,1513251617.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:17.260Z,1513251617.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:17.640Z,1513251617.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:17.654Z,1513251617.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:17.874Z,1513251617.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:18.027Z,1513251618.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:18.043Z,1513251618.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:18.437Z,1513251618.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:18.456Z,1513251618.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:18.669Z,1513251618.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:18.841Z,1513251618.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:18.856Z,1513251618.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:19.073Z,1513251619.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:19.246Z,1513251619.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:19.269Z,1513251619.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:19.627Z,1513251619.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:19.659Z,1513251619.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:19.870Z,1513251619.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:20.027Z,1513251620.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:20.127Z,1513251620.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:20.428Z,1513251620.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:20.463Z,1513251620.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:20.665Z,1513251620.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:20.827Z,1513251620.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:20.903Z,1513251620.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:21.069Z,1513251621.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:21.258Z,1513251621.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:21.281Z,1513251621.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:21.643Z,1513251621.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:21.663Z,1513251621.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:21.867Z,1513251621.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:22.042Z,1513251622.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:22.057Z,1513251622.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:22.435Z,1513251622.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:22.455Z,1513251622.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:22.661Z,1513251622.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:22.837Z,1513251622.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:22.853Z,1513251622.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:23.065Z,1513251623.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:23.235Z,1513251623.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:23.250Z,1513251623.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:23.636Z,1513251623.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:23.679Z,1513251623.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:23.861Z,1513251623.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:24.061Z,1513251624.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:24.099Z,1513251624.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:24.447Z,1513251624.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:24.467Z,1513251624.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:24.657Z,1513251624.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:25.061Z,1513251625.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:25.858Z,1513251625.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:26.655Z,1513251626.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:27.085Z,1513251627.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:27.881Z,1513251627.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:28.057Z,1513251628.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:28.085Z,1513251628.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:28.194Z,1513251628.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:28.241Z,1513251628.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:28.538Z,1513251628.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:28.565Z,1513251628.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:28.678Z,1513251628.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:28.956Z,1513251628.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:29.003Z,1513251629.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:29.081Z,1513251629.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:29.341Z,1513251629.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:29.356Z,1513251629.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:29.739Z,1513251629.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:29.756Z,1513251629.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:29.881Z,1513251629.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:30.150Z,1513251630.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:30.165Z,1513251630.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:30.550Z,1513251630.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:30.571Z,1513251630.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:30.679Z,1513251630.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:30.944Z,1513251630.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:30.967Z,1513251630.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:31.085Z,1513251631.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:31.340Z,1513251631.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:31.361Z,1513251631.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:31.730Z,1513251631.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:31.761Z,1513251631.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:31.882Z,1513251631.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:32.149Z,1513251632.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:32.165Z,1513251632.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:32.554Z,1513251632.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:32.570Z,1513251632.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:32.678Z,1513251632.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:32.950Z,1513251632.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:32.965Z,1513251632.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:33.081Z,1513251633.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:33.332Z,1513251633.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:33.363Z,1513251633.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:33.732Z,1513251633.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:33.767Z,1513251633.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:33.878Z,1513251633.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:34.151Z,1513251634.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:34.166Z,1513251634.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:34.553Z,1513251634.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:34.575Z,1513251634.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:34.673Z,1513251634.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:34.955Z,1513251634.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:34.975Z,1513251634.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:35.077Z,1513251635.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:35.332Z,1513251635.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:35.359Z,1513251635.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:35.732Z,1513251635.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:35.776Z,1513251635.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:35.873Z,1513251635.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:36.150Z,1513251636.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:36.181Z,1513251636.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:36.556Z,1513251636.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:36.571Z,1513251636.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:36.670Z,1513251636.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:36.942Z,1513251636.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:37.013Z,1513251637.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:37.073Z,1513251637.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:37.332Z,1513251637.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:37.367Z,1513251637.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:37.735Z,1513251637.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:37.787Z,1513251637.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:37.870Z,1513251637.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:38.165Z,1513251638.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:38.179Z,1513251638.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:38.546Z,1513251638.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:38.567Z,1513251638.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:38.665Z,1513251638.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:38.942Z,1513251638.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:38.966Z,1513251638.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:39.069Z,1513251639.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:39.340Z,1513251639.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:39.354Z,1513251639.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:39.735Z,1513251639.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:39.774Z,1513251639.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:39.867Z,1513251639.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:40.151Z,1513251640.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:40.182Z,1513251640.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:40.551Z,1513251640.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:40.577Z,1513251640.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:40.662Z,1513251640.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:40.955Z,1513251640.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:40.970Z,1513251640.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:41.066Z,1513251641.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:41.332Z,1513251641.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:41.359Z,1513251641.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:41.731Z,1513251641.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:41.757Z,1513251641.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:41.861Z,1513251641.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:42.152Z,1513251642.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:42.168Z,1513251642.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:42.554Z,1513251642.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:42.571Z,1513251642.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:42.659Z,1513251642.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:42.996Z,1513251642.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:43.038Z,1513251643.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:43.070Z,1513251643.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:43.337Z,1513251643.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:43.351Z,1513251643.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:43.735Z,1513251643.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:43.759Z,1513251643.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:43.867Z,1513251643.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:44.141Z,1513251644.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:44.155Z,1513251644.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:44.541Z,1513251644.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:44.555Z,1513251644.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:44.661Z,1513251644.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:44.948Z,1513251644.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:44.964Z,1513251644.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:45.065Z,1513251645.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:45.348Z,1513251645.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:45.367Z,1513251645.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:45.747Z,1513251645.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:45.761Z,1513251645.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:45.862Z,1513251645.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:46.176Z,1513251646.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:46.246Z,1513251646.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:46.544Z,1513251646.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:46.558Z,1513251646.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:46.657Z,1513251646.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:46.932Z,1513251646.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:46.972Z,1513251646.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:47.061Z,1513251647.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:47.344Z,1513251647.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:47.360Z,1513251647.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:47.731Z,1513251647.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:47.762Z,1513251647.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:47.857Z,1513251647.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:48.153Z,1513251648.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:48.168Z,1513251648.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:48.555Z,1513251648.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:48.571Z,1513251648.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:48.653Z,1513251648.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:48.958Z,1513251648.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:48.979Z,1513251648.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:49.057Z,1513251649.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:49.333Z,1513251649.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:49.359Z,1513251649.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:49.731Z,1513251649.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:49.769Z,1513251649.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:49.854Z,1513251649.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:50.141Z,1513251650.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:50.180Z,1513251650.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:50.555Z,1513251650.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:50.609Z,1513251650.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:50.650Z,1513251650.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:50.954Z,1513251650.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:50.974Z,1513251650.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:51.053Z,1513251651.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:51.332Z,1513251651.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:51.363Z,1513251651.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:51.732Z,1513251651.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:51.746Z,1513251651.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:51.851Z,1513251651.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:52.151Z,1513251652.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:52.183Z,1513251652.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:52.595Z,1513251652.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:52.632Z,1513251652.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:52.646Z,1513251652.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:52.968Z,1513251652.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:52.983Z,1513251652.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:53.050Z,1513251653.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:53.338Z,1513251653.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:53.375Z,1513251653.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:53.738Z,1513251653.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:53.753Z,1513251653.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:53.846Z,1513251653.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:54.157Z,1513251654.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:54.187Z,1513251654.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:54.558Z,1513251654.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:54.591Z,1513251654.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:54.643Z,1513251654.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:54.944Z,1513251654.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:54.971Z,1513251654.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:55.081Z,1513251655.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:55.346Z,1513251655.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:55.367Z,1513251655.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:55.754Z,1513251655.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:55.799Z,1513251655.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:55.878Z,1513251655.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:56.154Z,1513251656.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:56.169Z,1513251656.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:56.555Z,1513251656.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:56.570Z,1513251656.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:56.674Z,1513251656.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:56.955Z,1513251656.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:56.980Z,1513251656.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:57.077Z,1513251657.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:57.341Z,1513251657.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:57.379Z,1513251657.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:57.742Z,1513251657.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:57.756Z,1513251657.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:57.874Z,1513251657.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:58.154Z,1513251658.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:58.254Z,1513251658.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:58.550Z,1513251658.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:58.581Z,1513251658.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:58.669Z,1513251658.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:58.982Z,1513251658.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:59.037Z,1513251659.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:59.074Z,1513251659.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:59.332Z,1513251659.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:59.370Z,1513251659.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:59.735Z,1513251659.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:40:59.787Z,1513251659.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:40:59.869Z,1513251659.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:00.160Z,1513251660.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:00.174Z,1513251660.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:00.555Z,1513251660.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:00.571Z,1513251660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:00.665Z,1513251660.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:00.955Z,1513251660.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:00.970Z,1513251660.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:01.069Z,1513251661.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:01.332Z,1513251661.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:01.371Z,1513251661.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:01.735Z,1513251661.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:01.768Z,1513251661.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:01.866Z,1513251661.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:02.168Z,1513251662.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:02.204Z,1513251662.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:02.545Z,1513251662.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:02.559Z,1513251662.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:02.661Z,1513251662.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:02.954Z,1513251662.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:02.986Z,1513251662.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:03.065Z,1513251663.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:03.344Z,1513251663.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:03.358Z,1513251663.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:03.738Z,1513251663.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:03.752Z,1513251663.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:03.861Z,1513251663.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:04.146Z,1513251664.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:04.184Z,1513251664.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:04.545Z,1513251664.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:04.584Z,1513251664.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:04.657Z,1513251664.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:04.945Z,1513251664.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:04.984Z,1513251664.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:05.061Z,1513251665.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:05.342Z,1513251665.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:05.357Z,1513251665.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:05.739Z,1513251665.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:05.759Z,1513251665.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:05.858Z,1513251665.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:06.146Z,1513251666.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:06.161Z,1513251666.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:06.545Z,1513251666.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:06.560Z,1513251666.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:06.653Z,1513251666.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:06.950Z,1513251666.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:06.964Z,1513251666.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:07.057Z,1513251667.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:07.339Z,1513251667.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:07.363Z,1513251667.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:07.743Z,1513251667.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:07.758Z,1513251667.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:07.854Z,1513251667.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:08.145Z,1513251668.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:08.195Z,1513251668.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:08.560Z,1513251668.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:08.651Z,1513251668.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:08.668Z,1513251668.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:08.954Z,1513251668.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:08.975Z,1513251668.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:09.073Z,1513251669.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:09.332Z,1513251669.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:09.366Z,1513251669.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:09.735Z,1513251669.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:09.761Z,1513251669.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:09.869Z,1513251669.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:10.155Z,1513251670.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:10.170Z,1513251670.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:10.550Z,1513251670.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:10.576Z,1513251670.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:10.666Z,1513251670.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:10.945Z,1513251670.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:10.978Z,1513251670.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:11.069Z,1513251671.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:11.340Z,1513251671.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:11.425Z,1513251671.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:11.739Z,1513251671.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:11.776Z,1513251671.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:11.866Z,1513251671.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:12.141Z,1513251672.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:12.156Z,1513251672.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:12.576Z,1513251672.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:12.591Z,1513251672.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:12.663Z,1513251672.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:12.955Z,1513251672.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:12.979Z,1513251672.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:13.065Z,1513251673.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:13.344Z,1513251673.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:13.358Z,1513251673.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:13.738Z,1513251673.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:13.753Z,1513251673.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:13.863Z,1513251673.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:14.145Z,1513251674.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:14.160Z,1513251674.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:14.545Z,1513251674.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:14.559Z,1513251674.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:14.657Z,1513251674.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:14.953Z,1513251674.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:14.980Z,1513251674.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:15.062Z,1513251675.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:15.331Z,1513251675.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:15.358Z,1513251675.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:15.731Z,1513251675.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:15.758Z,1513251675.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:15.857Z,1513251675.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:16.154Z,1513251676.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:16.177Z,1513251676.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:16.562Z,1513251676.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:16.583Z,1513251676.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:16.653Z,1513251676.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:16.957Z,1513251676.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:16.979Z,1513251676.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:17.057Z,1513251677.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:17.333Z,1513251677.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:17.368Z,1513251677.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:17.736Z,1513251677.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:17.772Z,1513251677.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:17.854Z,1513251677.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:18.184Z,1513251678.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:18.227Z,1513251678.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:18.555Z,1513251678.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:18.587Z,1513251678.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:18.652Z,1513251678.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:18.993Z,1513251678.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:19.022Z,1513251679.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:19.061Z,1513251679.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:19.335Z,1513251679.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:19.374Z,1513251679.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:19.751Z,1513251679.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:19.784Z,1513251679.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:19.862Z,1513251679.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:20.146Z,1513251680.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:20.239Z,1513251680.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:20.532Z,1513251680.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:20.588Z,1513251680.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:20.658Z,1513251680.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:20.942Z,1513251680.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:20.980Z,1513251680.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:21.062Z,1513251681.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:21.350Z,1513251681.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:21.399Z,1513251681.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:21.746Z,1513251681.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:21.763Z,1513251681.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:21.858Z,1513251681.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:22.143Z,1513251682.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:22.215Z,1513251682.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:22.562Z,1513251682.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:22.586Z,1513251682.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:22.655Z,1513251682.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:22.951Z,1513251682.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:23.007Z,1513251683.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:23.077Z,1513251683.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:23.342Z,1513251683.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:23.388Z,1513251683.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:23.743Z,1513251683.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:23.762Z,1513251683.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:23.875Z,1513251683.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:24.146Z,1513251684.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:24.207Z,1513251684.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:24.559Z,1513251684.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:24.578Z,1513251684.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:24.670Z,1513251684.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:25.081Z,1513251685.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:25.878Z,1513251685.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:26.673Z,1513251686.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:27.078Z,1513251687.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:27.874Z,1513251687.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:28.670Z,1513251688.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:29.074Z,1513251689.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:29.860Z,1513251689.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:29.874Z,1513251689.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:29.909Z,1513251689.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:30.004Z,1513251690.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:30.067Z,1513251690.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:30.398Z,1513251690.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:30.455Z,1513251690.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:30.670Z,1513251690.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:30.825Z,1513251690.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:30.853Z,1513251690.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:31.074Z,1513251691.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:31.202Z,1513251691.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:31.263Z,1513251691.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:31.638Z,1513251691.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:31.689Z,1513251691.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:31.870Z,1513251691.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:32.022Z,1513251692.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:32.043Z,1513251692.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:32.389Z,1513251692.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:32.446Z,1513251692.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:32.666Z,1513251692.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:32.801Z,1513251692.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:32.844Z,1513251692.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:33.070Z,1513251693.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:33.199Z,1513251693.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:33.255Z,1513251693.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:33.592Z,1513251693.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:33.615Z,1513251693.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:33.866Z,1513251693.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:34.013Z,1513251694.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:34.050Z,1513251694.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:34.448Z,1513251694.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:34.498Z,1513251694.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:34.662Z,1513251694.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:34.800Z,1513251694.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:34.819Z,1513251694.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:35.066Z,1513251695.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:35.196Z,1513251695.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:35.244Z,1513251695.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:35.587Z,1513251695.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:35.628Z,1513251695.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:35.862Z,1513251695.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:35.981Z,1513251695.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:36.035Z,1513251696.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:36.382Z,1513251696.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:36.451Z,1513251696.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:36.659Z,1513251696.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:36.782Z,1513251696.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:36.815Z,1513251696.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:37.069Z,1513251697.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:37.203Z,1513251697.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:37.227Z,1513251697.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:37.596Z,1513251697.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:37.636Z,1513251697.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:37.866Z,1513251697.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:37.992Z,1513251697.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:38.031Z,1513251698.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:38.381Z,1513251698.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:38.429Z,1513251698.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:38.664Z,1513251698.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:38.781Z,1513251698.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:38.831Z,1513251698.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:39.069Z,1513251699.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:39.186Z,1513251699.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:39.234Z,1513251699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:39.590Z,1513251699.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:39.629Z,1513251699.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:39.866Z,1513251699.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:39.988Z,1513251699.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:40.007Z,1513251700.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:40.427Z,1513251700.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:40.442Z,1513251700.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:40.664Z,1513251700.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:40.800Z,1513251700.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:40.844Z,1513251700.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:41.070Z,1513251701.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:41.192Z,1513251701.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:41.227Z,1513251701.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:41.602Z,1513251701.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:41.652Z,1513251701.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:41.866Z,1513251701.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:41.992Z,1513251701.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:42.079Z,1513251702.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:42.381Z,1513251702.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:42.421Z,1513251702.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:42.662Z,1513251702.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:42.780Z,1513251702.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:42.852Z,1513251702.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:43.065Z,1513251703.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:43.192Z,1513251703.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:43.258Z,1513251703.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:43.606Z,1513251703.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:43.660Z,1513251703.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:43.862Z,1513251703.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:44.006Z,1513251704.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:44.055Z,1513251704.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:44.382Z,1513251704.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:44.431Z,1513251704.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:44.658Z,1513251704.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:44.814Z,1513251704.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:44.842Z,1513251704.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:45.061Z,1513251705.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:45.185Z,1513251705.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:45.234Z,1513251705.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:45.588Z,1513251705.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:45.634Z,1513251705.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:45.858Z,1513251705.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:45.988Z,1513251705.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:46.030Z,1513251706.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:46.395Z,1513251706.395 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T11:41:46.395Z,1513251706.395 [NAL9602] Data Fault, FailCount= 1
2017-12-14T11:41:46.395Z,1513251706.395 [NAL9602](ERROR): Data Fault
2017-12-14T11:41:46.432Z,1513251706.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:46.477Z,1513251706.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:46.503Z,1513251706.503 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T11:41:46.654Z,1513251706.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:46.768Z,1513251706.768 [NAL9602](INFO): Powering down
2017-12-14T11:41:46.788Z,1513251706.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:46.832Z,1513251706.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:47.058Z,1513251707.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:47.189Z,1513251707.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:47.238Z,1513251707.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:47.598Z,1513251707.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:47.612Z,1513251707.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:47.664Z,1513251707.664 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T11:41:47.664Z,1513251707.664 [NAL9602] No Fault, FailCount= 1
2017-12-14T11:41:47.854Z,1513251707.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:47.986Z,1513251707.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:48.000Z,1513251708.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:48.403Z,1513251708.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:48.447Z,1513251708.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:48.649Z,1513251708.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:48.787Z,1513251708.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:48.803Z,1513251708.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:49.054Z,1513251709.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:49.190Z,1513251709.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:49.205Z,1513251709.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:49.588Z,1513251709.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:49.607Z,1513251709.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:49.850Z,1513251709.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:49.991Z,1513251709.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:50.005Z,1513251710.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:50.387Z,1513251710.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:50.401Z,1513251710.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:50.648Z,1513251710.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:50.789Z,1513251710.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:50.804Z,1513251710.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:51.057Z,1513251711.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:51.190Z,1513251711.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:51.205Z,1513251711.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:51.586Z,1513251711.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:51.607Z,1513251711.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:51.853Z,1513251711.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:51.991Z,1513251711.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:52.006Z,1513251712.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:52.388Z,1513251712.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:52.402Z,1513251712.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:52.654Z,1513251712.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:52.788Z,1513251712.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:52.846Z,1513251712.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:53.061Z,1513251713.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:53.186Z,1513251713.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:53.214Z,1513251713.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:53.590Z,1513251713.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:53.606Z,1513251713.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:53.858Z,1513251713.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:54.003Z,1513251714.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:54.109Z,1513251714.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:54.443Z,1513251714.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:54.487Z,1513251714.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:54.653Z,1513251714.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:54.791Z,1513251714.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:54.806Z,1513251714.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:55.057Z,1513251715.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:55.193Z,1513251715.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:55.208Z,1513251715.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:55.592Z,1513251715.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:55.606Z,1513251715.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:55.853Z,1513251715.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:55.988Z,1513251715.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:56.003Z,1513251716.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:56.387Z,1513251716.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:56.407Z,1513251716.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:56.649Z,1513251716.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:56.782Z,1513251716.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:56.807Z,1513251716.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:57.054Z,1513251717.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:57.188Z,1513251717.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:57.202Z,1513251717.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:57.613Z,1513251717.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:57.660Z,1513251717.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:57.849Z,1513251717.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:57.978Z,1513251717.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:58.015Z,1513251718.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:58.378Z,1513251718.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:58.404Z,1513251718.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:58.647Z,1513251718.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:58.778Z,1513251718.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:58.806Z,1513251718.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:59.057Z,1513251719.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:59.180Z,1513251719.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:59.194Z,1513251719.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:59.610Z,1513251719.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:59.711Z,1513251719.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:41:59.854Z,1513251719.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:41:59.979Z,1513251719.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:00.017Z,1513251720.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:00.378Z,1513251720.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:00.408Z,1513251720.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:00.649Z,1513251720.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:00.797Z,1513251720.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:00.834Z,1513251720.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:01.053Z,1513251721.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:01.205Z,1513251721.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:01.220Z,1513251721.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:01.586Z,1513251721.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:01.615Z,1513251721.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:01.854Z,1513251721.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:01.987Z,1513251721.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:02.017Z,1513251722.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:02.413Z,1513251722.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:02.439Z,1513251722.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:02.651Z,1513251722.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:02.784Z,1513251722.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:02.816Z,1513251722.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:03.057Z,1513251723.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:03.182Z,1513251723.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:03.219Z,1513251723.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:03.587Z,1513251723.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:03.623Z,1513251723.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:03.854Z,1513251723.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:04.023Z,1513251724.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:04.062Z,1513251724.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:04.389Z,1513251724.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:04.404Z,1513251724.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:04.651Z,1513251724.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:04.785Z,1513251724.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:04.878Z,1513251724.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:05.057Z,1513251725.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:05.178Z,1513251725.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:05.217Z,1513251725.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:05.582Z,1513251725.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:05.631Z,1513251725.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:05.853Z,1513251725.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:05.978Z,1513251725.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:06.010Z,1513251726.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:06.382Z,1513251726.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:06.435Z,1513251726.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:06.652Z,1513251726.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:06.783Z,1513251726.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:06.809Z,1513251726.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:07.065Z,1513251727.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:07.215Z,1513251727.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:07.262Z,1513251727.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:07.578Z,1513251727.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:07.592Z,1513251727.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:07.861Z,1513251727.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:07.982Z,1513251727.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:08.016Z,1513251728.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:08.379Z,1513251728.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:08.410Z,1513251728.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:08.657Z,1513251728.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:08.781Z,1513251728.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:08.814Z,1513251728.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:09.061Z,1513251729.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:09.192Z,1513251729.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:09.206Z,1513251729.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:09.593Z,1513251729.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:09.608Z,1513251729.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:09.858Z,1513251729.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:09.986Z,1513251729.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:10.007Z,1513251730.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:10.387Z,1513251730.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:10.401Z,1513251730.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:10.653Z,1513251730.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:10.781Z,1513251730.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:10.811Z,1513251730.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:10.811Z,1513251730.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 223
2017-12-14T11:42:10.812Z,1513251730.812 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:42:10.813Z,1513251730.813 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:10.814Z,1513251730.814 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 223
2017-12-14T11:42:10.814Z,1513251730.814 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:42:10.816Z,1513251730.816 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:10.816Z,1513251730.816 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 223
2017-12-14T11:42:10.816Z,1513251730.816 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:42:10.837Z,1513251730.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:42:10.837Z,1513251730.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:42:10.838Z,1513251730.838 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:42:11.057Z,1513251731.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:11.181Z,1513251731.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:11.232Z,1513251731.232 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:42:11.232Z,1513251731.232 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 223
2017-12-14T11:42:11.233Z,1513251731.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:42:11.233Z,1513251731.233 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 223
2017-12-14T11:42:11.233Z,1513251731.233 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:42:11.234Z,1513251731.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 223
2017-12-14T11:42:11.576Z,1513251731.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:11.601Z,1513251731.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:42:11.601Z,1513251731.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:42:11.602Z,1513251731.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:42:11.602Z,1513251731.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:42:11.603Z,1513251731.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:42:11.603Z,1513251731.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:42:11.603Z,1513251731.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:42:11.604Z,1513251731.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:42:11.604Z,1513251731.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:42:11.854Z,1513251731.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:11.988Z,1513251731.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:12.014Z,1513251732.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:12.378Z,1513251732.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:12.392Z,1513251732.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:12.650Z,1513251732.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:12.787Z,1513251732.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:12.821Z,1513251732.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:13.054Z,1513251733.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:13.179Z,1513251733.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:13.194Z,1513251733.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:13.616Z,1513251733.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:13.643Z,1513251733.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:13.850Z,1513251733.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:13.979Z,1513251733.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:14.025Z,1513251734.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:14.379Z,1513251734.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:14.395Z,1513251734.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:14.647Z,1513251734.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:14.784Z,1513251734.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:14.831Z,1513251734.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:15.065Z,1513251735.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:15.186Z,1513251735.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:15.229Z,1513251735.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:15.586Z,1513251735.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:15.601Z,1513251735.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:15.862Z,1513251735.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:15.985Z,1513251735.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:16.000Z,1513251736.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:16.409Z,1513251736.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:16.449Z,1513251736.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:16.657Z,1513251736.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:16.796Z,1513251736.796 [NAL9602](INFO): Powering up NAL9602
2017-12-14T11:42:16.820Z,1513251736.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:16.871Z,1513251736.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:17.061Z,1513251737.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:17.179Z,1513251737.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:17.206Z,1513251737.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:17.578Z,1513251737.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:17.604Z,1513251737.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:17.858Z,1513251737.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:17.993Z,1513251737.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:18.016Z,1513251738.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:18.393Z,1513251738.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:18.415Z,1513251738.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:18.655Z,1513251738.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:18.802Z,1513251738.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:18.817Z,1513251738.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:19.061Z,1513251739.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:19.194Z,1513251739.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:19.209Z,1513251739.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:19.579Z,1513251739.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:19.615Z,1513251739.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:19.857Z,1513251739.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:19.996Z,1513251739.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:20.044Z,1513251740.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:20.379Z,1513251740.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:20.406Z,1513251740.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:20.655Z,1513251740.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:20.779Z,1513251740.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:20.813Z,1513251740.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:21.066Z,1513251741.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:21.179Z,1513251741.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:21.206Z,1513251741.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:21.576Z,1513251741.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:21.615Z,1513251741.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:21.862Z,1513251741.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:21.976Z,1513251741.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:22.008Z,1513251742.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:22.379Z,1513251742.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:22.412Z,1513251742.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:22.657Z,1513251742.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:22.779Z,1513251742.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:22.806Z,1513251742.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:23.061Z,1513251743.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:23.180Z,1513251743.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:23.218Z,1513251743.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:23.579Z,1513251743.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:23.615Z,1513251743.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:23.857Z,1513251743.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:23.979Z,1513251743.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:24.069Z,1513251744.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:24.078Z,1513251744.078 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:42:24.078Z,1513251744.078 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:42:24.078Z,1513251744.078 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:42:24.078Z,1513251744.078 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:42:24.378Z,1513251744.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:24.404Z,1513251744.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:24.407Z,1513251744.407 [Default:CheckIn:D] Stopped
2017-12-14T11:42:24.407Z,1513251744.407 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:42:24.653Z,1513251744.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:24.780Z,1513251744.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:24.811Z,1513251744.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 669.150260 min 
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn:E] Stopped
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn] Stopped
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:42:24.815Z,1513251744.815 [Default:CheckIn](INFO): Running loop #65
2017-12-14T11:42:24.816Z,1513251744.816 [Default:CheckIn] Running Loop=65
2017-12-14T11:42:24.816Z,1513251744.816 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:42:24.816Z,1513251744.816 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:42:25.057Z,1513251745.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:25.854Z,1513251745.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:26.650Z,1513251746.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:27.053Z,1513251747.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:27.850Z,1513251747.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:28.423Z,1513251748.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:28.496Z,1513251748.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:28.627Z,1513251748.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:28.642Z,1513251748.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:28.646Z,1513251748.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:28.946Z,1513251748.946 [NAL9602](INFO): NAL9602 initialized
2017-12-14T11:42:28.977Z,1513251748.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:29.035Z,1513251749.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:29.051Z,1513251749.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:29.373Z,1513251749.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:29.388Z,1513251749.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:29.771Z,1513251749.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:29.819Z,1513251749.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:29.846Z,1513251749.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:30.234Z,1513251750.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:30.256Z,1513251750.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:30.573Z,1513251750.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:30.619Z,1513251750.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:30.641Z,1513251750.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:30.966Z,1513251750.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:30.995Z,1513251750.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:31.050Z,1513251751.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:31.360Z,1513251751.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:31.398Z,1513251751.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:31.771Z,1513251751.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:31.786Z,1513251751.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:31.847Z,1513251751.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:32.174Z,1513251752.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:32.195Z,1513251752.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:32.579Z,1513251752.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:32.594Z,1513251752.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:32.644Z,1513251752.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:32.982Z,1513251752.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:32.998Z,1513251752.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:33.069Z,1513251753.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:33.359Z,1513251753.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:33.386Z,1513251753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:33.760Z,1513251753.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:33.786Z,1513251753.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:33.867Z,1513251753.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:34.160Z,1513251754.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:34.195Z,1513251754.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:34.564Z,1513251754.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:34.591Z,1513251754.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:34.663Z,1513251754.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:34.963Z,1513251754.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:35.006Z,1513251755.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:35.077Z,1513251755.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:35.377Z,1513251755.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:35.410Z,1513251755.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:35.777Z,1513251755.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:35.809Z,1513251755.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:35.874Z,1513251755.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:36.189Z,1513251756.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:36.203Z,1513251756.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:36.570Z,1513251756.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:36.584Z,1513251756.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:36.669Z,1513251756.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:36.962Z,1513251756.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:36.995Z,1513251756.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:37.073Z,1513251757.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:37.372Z,1513251757.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:37.386Z,1513251757.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:37.774Z,1513251757.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:37.788Z,1513251757.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:37.870Z,1513251757.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:38.179Z,1513251758.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:38.233Z,1513251758.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:38.589Z,1513251758.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:38.603Z,1513251758.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:38.665Z,1513251758.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:38.981Z,1513251758.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:39.003Z,1513251759.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:39.069Z,1513251759.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:39.359Z,1513251759.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:39.394Z,1513251759.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:39.763Z,1513251759.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:39.792Z,1513251759.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:39.867Z,1513251759.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:40.159Z,1513251760.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:40.186Z,1513251760.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:40.560Z,1513251760.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:40.586Z,1513251760.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:40.661Z,1513251760.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:40.975Z,1513251760.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:40.989Z,1513251760.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:41.066Z,1513251761.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:41.388Z,1513251761.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:41.403Z,1513251761.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:41.786Z,1513251761.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:41.800Z,1513251761.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:41.862Z,1513251761.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:42.176Z,1513251762.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:42.191Z,1513251762.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:42.616Z,1513251762.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:42.658Z,1513251762.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:42.662Z,1513251762.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:42.967Z,1513251762.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:42.987Z,1513251762.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:43.061Z,1513251763.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:43.368Z,1513251763.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:43.382Z,1513251763.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:43.769Z,1513251763.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:43.784Z,1513251763.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:43.858Z,1513251763.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:44.172Z,1513251764.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:44.188Z,1513251764.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:44.576Z,1513251764.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:44.590Z,1513251764.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:44.654Z,1513251764.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:44.978Z,1513251764.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:44.993Z,1513251764.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:45.057Z,1513251765.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:45.368Z,1513251765.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:45.383Z,1513251765.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:45.791Z,1513251765.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:45.834Z,1513251765.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:45.862Z,1513251765.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:46.160Z,1513251766.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:46.191Z,1513251766.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:46.564Z,1513251766.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:46.641Z,1513251766.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:46.659Z,1513251766.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:46.964Z,1513251766.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:47.003Z,1513251767.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:47.073Z,1513251767.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:47.376Z,1513251767.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:47.405Z,1513251767.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:47.781Z,1513251767.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:47.811Z,1513251767.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:47.870Z,1513251767.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:48.181Z,1513251768.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:48.211Z,1513251768.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:48.568Z,1513251768.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:48.583Z,1513251768.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:48.669Z,1513251768.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:48.979Z,1513251768.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:49.034Z,1513251769.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:49.073Z,1513251769.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:49.367Z,1513251769.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:49.387Z,1513251769.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:49.769Z,1513251769.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:49.784Z,1513251769.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:49.870Z,1513251769.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:50.176Z,1513251770.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:50.247Z,1513251770.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:50.581Z,1513251770.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:50.596Z,1513251770.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:50.665Z,1513251770.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:50.978Z,1513251770.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:51.022Z,1513251771.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:51.069Z,1513251771.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:51.367Z,1513251771.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:51.423Z,1513251771.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:51.759Z,1513251771.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:51.791Z,1513251771.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:51.867Z,1513251771.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:52.188Z,1513251772.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:52.259Z,1513251772.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:52.566Z,1513251772.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:52.584Z,1513251772.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:52.661Z,1513251772.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:52.968Z,1513251772.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:52.987Z,1513251772.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:53.065Z,1513251773.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:53.382Z,1513251773.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:53.418Z,1513251773.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:53.773Z,1513251773.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:53.789Z,1513251773.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:53.862Z,1513251773.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:54.172Z,1513251774.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:54.186Z,1513251774.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:54.569Z,1513251774.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:54.591Z,1513251774.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:54.657Z,1513251774.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:54.962Z,1513251774.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:54.995Z,1513251774.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:55.061Z,1513251775.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:55.369Z,1513251775.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:55.384Z,1513251775.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:55.760Z,1513251775.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:55.795Z,1513251775.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:55.858Z,1513251775.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:56.176Z,1513251776.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:56.203Z,1513251776.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:56.573Z,1513251776.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:56.603Z,1513251776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:56.653Z,1513251776.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:56.986Z,1513251776.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:57.001Z,1513251777.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:57.057Z,1513251777.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:57.359Z,1513251777.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:57.394Z,1513251777.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:57.761Z,1513251777.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:57.795Z,1513251777.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:57.854Z,1513251777.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:58.164Z,1513251778.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:58.195Z,1513251778.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:58.609Z,1513251778.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:58.650Z,1513251778.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:58.658Z,1513251778.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:58.970Z,1513251778.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:58.984Z,1513251778.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:59.053Z,1513251779.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:59.377Z,1513251779.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:59.408Z,1513251779.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:59.777Z,1513251779.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:42:59.792Z,1513251779.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:42:59.850Z,1513251779.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:00.181Z,1513251780.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:00.214Z,1513251780.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:00.569Z,1513251780.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:00.647Z,1513251780.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:00.676Z,1513251780.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:00.959Z,1513251780.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:00.985Z,1513251780.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:01.073Z,1513251781.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:01.359Z,1513251781.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:01.395Z,1513251781.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:01.763Z,1513251781.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:01.842Z,1513251781.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:01.870Z,1513251781.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:02.182Z,1513251782.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:02.223Z,1513251782.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:02.574Z,1513251782.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:02.595Z,1513251782.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:02.667Z,1513251782.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:02.982Z,1513251782.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:03.002Z,1513251783.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:03.077Z,1513251783.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:03.365Z,1513251783.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:03.380Z,1513251783.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:03.763Z,1513251783.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:03.777Z,1513251783.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:03.873Z,1513251783.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:04.165Z,1513251784.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:04.180Z,1513251784.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:04.570Z,1513251784.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:04.585Z,1513251784.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:04.669Z,1513251784.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:05.001Z,1513251785.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:05.020Z,1513251785.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:05.073Z,1513251785.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:05.373Z,1513251785.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:05.389Z,1513251785.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:05.781Z,1513251785.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:05.796Z,1513251785.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:05.870Z,1513251785.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:06.177Z,1513251786.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:06.192Z,1513251786.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:06.575Z,1513251786.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:06.590Z,1513251786.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:06.665Z,1513251786.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:06.962Z,1513251786.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:06.993Z,1513251786.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:07.069Z,1513251787.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:07.372Z,1513251787.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:07.387Z,1513251787.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:07.772Z,1513251787.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:07.791Z,1513251787.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:08.183Z,1513251788.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:08.214Z,1513251788.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:08.604Z,1513251788.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:08.627Z,1513251788.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:08.983Z,1513251788.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:08.997Z,1513251788.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:09.360Z,1513251789.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:09.391Z,1513251789.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:09.773Z,1513251789.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:09.787Z,1513251789.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:10.159Z,1513251790.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:10.186Z,1513251790.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:10.582Z,1513251790.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:10.603Z,1513251790.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:10.959Z,1513251790.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:10.996Z,1513251790.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:11.386Z,1513251791.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:11.401Z,1513251791.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:11.784Z,1513251791.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:11.800Z,1513251791.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:11.858Z,1513251791.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:12.169Z,1513251792.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:12.200Z,1513251792.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:12.559Z,1513251792.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:12.654Z,1513251792.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:12.656Z,1513251792.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:12.970Z,1513251792.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:12.999Z,1513251792.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:13.057Z,1513251793.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:13.360Z,1513251793.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:13.403Z,1513251793.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:13.760Z,1513251793.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:13.819Z,1513251793.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:13.854Z,1513251793.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:14.173Z,1513251794.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:14.199Z,1513251794.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:14.589Z,1513251794.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:14.651Z,1513251794.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:14.720Z,1513251794.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:14.971Z,1513251794.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:14.991Z,1513251794.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:15.077Z,1513251795.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:15.369Z,1513251795.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:15.391Z,1513251795.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:15.767Z,1513251795.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:15.781Z,1513251795.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:15.873Z,1513251795.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:16.168Z,1513251796.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:16.184Z,1513251796.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:16.566Z,1513251796.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:16.589Z,1513251796.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:16.669Z,1513251796.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:16.965Z,1513251796.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:17.005Z,1513251797.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:17.077Z,1513251797.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:17.374Z,1513251797.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:17.401Z,1513251797.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:17.786Z,1513251797.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:17.815Z,1513251797.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:17.874Z,1513251797.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:18.170Z,1513251798.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:18.185Z,1513251798.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:18.567Z,1513251798.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:18.583Z,1513251798.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:18.669Z,1513251798.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:18.962Z,1513251798.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:18.985Z,1513251798.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:19.073Z,1513251799.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:19.372Z,1513251799.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:19.386Z,1513251799.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:19.769Z,1513251799.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:19.784Z,1513251799.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:19.870Z,1513251799.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:20.178Z,1513251800.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:20.193Z,1513251800.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:20.581Z,1513251800.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:20.603Z,1513251800.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:20.670Z,1513251800.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:20.982Z,1513251800.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:21.040Z,1513251801.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:21.073Z,1513251801.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:21.359Z,1513251801.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:21.384Z,1513251801.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:21.759Z,1513251801.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:21.791Z,1513251801.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:22.173Z,1513251802.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:22.187Z,1513251802.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:22.560Z,1513251802.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:22.587Z,1513251802.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:22.959Z,1513251802.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:23.004Z,1513251803.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:23.382Z,1513251803.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:23.398Z,1513251803.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:23.781Z,1513251803.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:23.796Z,1513251803.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:24.213Z,1513251804.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:24.252Z,1513251804.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:24.570Z,1513251804.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:24.597Z,1513251804.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:24.975Z,1513251804.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:25.005Z,1513251805.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:28.356Z,1513251808.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:28.372Z,1513251808.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:28.464Z,1513251808.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:28.506Z,1513251808.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:28.863Z,1513251808.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:28.883Z,1513251808.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:29.262Z,1513251809.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:29.277Z,1513251809.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:29.662Z,1513251809.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:29.683Z,1513251809.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:29.871Z,1513251809.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:30.046Z,1513251810.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:30.067Z,1513251810.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:30.449Z,1513251810.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:30.465Z,1513251810.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:30.667Z,1513251810.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:30.849Z,1513251810.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:30.868Z,1513251810.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:31.077Z,1513251811.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:31.262Z,1513251811.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:31.283Z,1513251811.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:31.662Z,1513251811.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:31.678Z,1513251811.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:31.874Z,1513251811.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:32.063Z,1513251812.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:32.080Z,1513251812.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:32.462Z,1513251812.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:32.476Z,1513251812.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:32.669Z,1513251812.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:32.856Z,1513251812.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:32.871Z,1513251812.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:33.073Z,1513251813.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:33.256Z,1513251813.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:33.271Z,1513251813.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:33.652Z,1513251813.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:33.668Z,1513251813.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:33.870Z,1513251813.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:34.059Z,1513251814.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:34.075Z,1513251814.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:34.461Z,1513251814.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:34.476Z,1513251814.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:34.665Z,1513251814.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:34.862Z,1513251814.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:34.931Z,1513251814.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:35.069Z,1513251815.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:35.250Z,1513251815.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:35.284Z,1513251815.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:35.639Z,1513251815.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:35.674Z,1513251815.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:36.058Z,1513251816.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:36.118Z,1513251816.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:36.462Z,1513251816.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:36.483Z,1513251816.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:36.862Z,1513251816.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:36.954Z,1513251816.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:37.240Z,1513251817.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:37.285Z,1513251817.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:37.639Z,1513251817.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:37.673Z,1513251817.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:38.062Z,1513251818.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:38.077Z,1513251818.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:38.461Z,1513251818.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:38.475Z,1513251818.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:38.863Z,1513251818.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:38.883Z,1513251818.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:39.245Z,1513251819.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:39.271Z,1513251819.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:39.639Z,1513251819.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:39.674Z,1513251819.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:39.858Z,1513251819.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:40.066Z,1513251820.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:40.120Z,1513251820.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:40.462Z,1513251820.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:40.478Z,1513251820.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:40.655Z,1513251820.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:40.850Z,1513251820.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:40.883Z,1513251820.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:41.061Z,1513251821.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:41.248Z,1513251821.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:41.274Z,1513251821.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:41.635Z,1513251821.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:41.671Z,1513251821.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:42.067Z,1513251822.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:42.082Z,1513251822.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:42.454Z,1513251822.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:42.481Z,1513251822.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:42.850Z,1513251822.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:42.885Z,1513251822.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:43.270Z,1513251823.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:43.297Z,1513251823.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:43.647Z,1513251823.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:43.679Z,1513251823.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:43.865Z,1513251823.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:44.068Z,1513251824.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:44.087Z,1513251824.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:44.473Z,1513251824.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:44.488Z,1513251824.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:44.662Z,1513251824.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:44.881Z,1513251824.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:44.895Z,1513251824.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:45.069Z,1513251825.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:45.242Z,1513251825.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:45.291Z,1513251825.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:45.644Z,1513251825.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:45.667Z,1513251825.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:45.866Z,1513251825.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:46.053Z,1513251826.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:46.087Z,1513251826.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:46.485Z,1513251826.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:46.508Z,1513251826.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:46.664Z,1513251826.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:46.850Z,1513251826.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:46.887Z,1513251826.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:47.069Z,1513251827.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:47.240Z,1513251827.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:47.256Z,1513251827.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:47.647Z,1513251827.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:47.662Z,1513251827.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:47.866Z,1513251827.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:48.057Z,1513251828.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:48.088Z,1513251828.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:48.452Z,1513251828.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:48.466Z,1513251828.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:48.661Z,1513251828.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:48.866Z,1513251828.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:48.892Z,1513251828.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:49.065Z,1513251829.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:49.245Z,1513251829.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:49.271Z,1513251829.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:49.688Z,1513251829.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:49.743Z,1513251829.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:49.862Z,1513251829.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:50.050Z,1513251830.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:50.071Z,1513251830.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:50.454Z,1513251830.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:50.475Z,1513251830.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:50.657Z,1513251830.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:50.854Z,1513251830.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:50.868Z,1513251830.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:51.061Z,1513251831.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:51.250Z,1513251831.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:51.265Z,1513251831.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:51.642Z,1513251831.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:51.674Z,1513251831.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:51.858Z,1513251831.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:52.058Z,1513251832.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:52.074Z,1513251832.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:52.460Z,1513251832.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:52.484Z,1513251832.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:52.653Z,1513251832.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:52.884Z,1513251832.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:52.915Z,1513251832.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:53.057Z,1513251833.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:53.266Z,1513251833.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:53.281Z,1513251833.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:53.639Z,1513251833.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:53.676Z,1513251833.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:53.854Z,1513251833.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:54.061Z,1513251834.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:54.083Z,1513251834.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:54.462Z,1513251834.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:54.484Z,1513251834.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:54.649Z,1513251834.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:54.861Z,1513251834.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:54.876Z,1513251834.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:55.053Z,1513251835.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:55.253Z,1513251835.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:55.268Z,1513251835.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:55.640Z,1513251835.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:55.675Z,1513251835.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:55.849Z,1513251835.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:56.068Z,1513251836.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:56.096Z,1513251836.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:56.462Z,1513251836.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:56.478Z,1513251836.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:56.647Z,1513251836.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:56.863Z,1513251836.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:56.883Z,1513251836.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:57.053Z,1513251837.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:57.251Z,1513251837.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:57.304Z,1513251837.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:57.647Z,1513251837.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:57.700Z,1513251837.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:57.850Z,1513251837.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:58.066Z,1513251838.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:58.080Z,1513251838.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:58.470Z,1513251838.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:58.523Z,1513251838.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:58.648Z,1513251838.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:58.878Z,1513251838.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:58.899Z,1513251838.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:59.057Z,1513251839.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:59.279Z,1513251839.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:59.324Z,1513251839.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:59.646Z,1513251839.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:43:59.675Z,1513251839.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:43:59.854Z,1513251839.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:00.054Z,1513251840.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:00.085Z,1513251840.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:00.454Z,1513251840.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:00.478Z,1513251840.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:00.649Z,1513251840.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:00.866Z,1513251840.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:00.887Z,1513251840.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:01.053Z,1513251841.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:01.247Z,1513251841.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:01.273Z,1513251841.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:01.643Z,1513251841.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:01.657Z,1513251841.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:01.851Z,1513251841.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:02.054Z,1513251842.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:02.087Z,1513251842.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:02.503Z,1513251842.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:02.539Z,1513251842.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:02.646Z,1513251842.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:02.854Z,1513251842.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:02.875Z,1513251842.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:03.049Z,1513251843.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:03.282Z,1513251843.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:03.305Z,1513251843.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:03.639Z,1513251843.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:03.679Z,1513251843.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:03.846Z,1513251843.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:04.053Z,1513251844.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:04.082Z,1513251844.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:04.454Z,1513251844.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:04.479Z,1513251844.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:04.641Z,1513251844.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:04.854Z,1513251844.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:04.888Z,1513251844.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:05.047Z,1513251845.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:05.244Z,1513251845.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:05.284Z,1513251845.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:05.635Z,1513251845.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:05.650Z,1513251845.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:05.842Z,1513251845.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:06.058Z,1513251846.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:06.092Z,1513251846.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:06.456Z,1513251846.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:06.486Z,1513251846.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:06.637Z,1513251846.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:06.858Z,1513251846.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:06.891Z,1513251846.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:07.042Z,1513251847.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:07.250Z,1513251847.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:07.281Z,1513251847.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:07.647Z,1513251847.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:07.700Z,1513251847.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:07.837Z,1513251847.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:08.054Z,1513251848.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:08.087Z,1513251848.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:08.477Z,1513251848.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:08.493Z,1513251848.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:08.635Z,1513251848.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:08.857Z,1513251848.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:08.887Z,1513251848.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:09.045Z,1513251849.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:09.244Z,1513251849.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:09.259Z,1513251849.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:09.652Z,1513251849.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:09.687Z,1513251849.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:09.843Z,1513251849.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:10.058Z,1513251850.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:10.093Z,1513251850.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:10.446Z,1513251850.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:10.461Z,1513251850.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:10.639Z,1513251850.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:10.862Z,1513251850.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:10.896Z,1513251850.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:11.058Z,1513251851.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:11.249Z,1513251851.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:11.263Z,1513251851.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:11.642Z,1513251851.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:11.657Z,1513251851.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:11.854Z,1513251851.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:12.062Z,1513251852.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:12.090Z,1513251852.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:12.463Z,1513251852.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:12.499Z,1513251852.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:12.651Z,1513251852.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:12.867Z,1513251852.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:12.898Z,1513251852.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:13.077Z,1513251853.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:13.244Z,1513251853.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:13.268Z,1513251853.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:13.652Z,1513251853.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:13.667Z,1513251853.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:13.873Z,1513251853.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:14.058Z,1513251854.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:14.074Z,1513251854.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:14.457Z,1513251854.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:14.475Z,1513251854.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:14.669Z,1513251854.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:14.858Z,1513251854.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:14.873Z,1513251854.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:15.073Z,1513251855.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:15.246Z,1513251855.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:15.270Z,1513251855.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:15.651Z,1513251855.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:15.667Z,1513251855.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:15.870Z,1513251855.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:16.086Z,1513251856.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:16.119Z,1513251856.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:16.466Z,1513251856.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:16.481Z,1513251856.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:16.665Z,1513251856.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:16.857Z,1513251856.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:16.880Z,1513251856.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:17.069Z,1513251857.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:17.255Z,1513251857.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:17.270Z,1513251857.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:17.651Z,1513251857.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:17.667Z,1513251857.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:17.866Z,1513251857.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:18.055Z,1513251858.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:18.071Z,1513251858.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:18.462Z,1513251858.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:18.483Z,1513251858.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:18.662Z,1513251858.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:18.863Z,1513251858.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:18.878Z,1513251858.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:19.065Z,1513251859.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:19.240Z,1513251859.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:19.291Z,1513251859.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:19.639Z,1513251859.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:19.700Z,1513251859.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:19.862Z,1513251859.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:20.054Z,1513251860.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:20.078Z,1513251860.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:20.461Z,1513251860.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:20.516Z,1513251860.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:20.657Z,1513251860.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:20.858Z,1513251860.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:20.880Z,1513251860.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:21.061Z,1513251861.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:21.240Z,1513251861.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:21.291Z,1513251861.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:21.644Z,1513251861.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:21.669Z,1513251861.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:21.858Z,1513251861.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:22.074Z,1513251862.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:22.100Z,1513251862.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:22.453Z,1513251862.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:22.484Z,1513251862.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:22.653Z,1513251862.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:22.849Z,1513251862.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:22.876Z,1513251862.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:23.057Z,1513251863.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:23.248Z,1513251863.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:23.262Z,1513251863.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:23.620Z,1513251863.620 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T11:44:23.620Z,1513251863.620 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T11:44:23.620Z,1513251863.620 [DropWeight](ERROR): Hardware Fault
2017-12-14T11:44:23.637Z,1513251863.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:23.659Z,1513251863.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:23.699Z,1513251863.699 [CBIT](INFO): Critical error at 20171214T114423
2017-12-14T11:44:23.705Z,1513251863.705 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T11:44:23.705Z,1513251863.705 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T11:44:23.854Z,1513251863.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:24.065Z,1513251864.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:24.089Z,1513251864.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:24.100Z,1513251864.100 [CBIT](INFO): Critical error at 20171214T114423
2017-12-14T11:44:24.462Z,1513251864.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:24.486Z,1513251864.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:24.651Z,1513251864.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:24.866Z,1513251864.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:24.895Z,1513251864.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:25.057Z,1513251865.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:25.291Z,1513251865.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:25.342Z,1513251865.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:25.854Z,1513251865.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:26.654Z,1513251866.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:27.077Z,1513251867.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:27.874Z,1513251867.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:28.671Z,1513251868.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:28.748Z,1513251868.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:28.767Z,1513251868.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:28.890Z,1513251868.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:28.937Z,1513251868.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:29.073Z,1513251869.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:29.265Z,1513251869.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:29.334Z,1513251869.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:29.661Z,1513251869.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:29.695Z,1513251869.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:29.870Z,1513251869.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:30.048Z,1513251870.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:30.063Z,1513251870.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:30.454Z,1513251870.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:30.468Z,1513251870.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:30.665Z,1513251870.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:30.847Z,1513251870.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:30.870Z,1513251870.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:31.069Z,1513251871.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:31.261Z,1513251871.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:31.276Z,1513251871.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:31.666Z,1513251871.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:31.713Z,1513251871.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:32.061Z,1513251872.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:32.083Z,1513251872.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:32.450Z,1513251872.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:32.471Z,1513251872.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:32.848Z,1513251872.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:32.868Z,1513251872.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:33.252Z,1513251873.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:33.267Z,1513251873.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:33.650Z,1513251873.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:33.664Z,1513251873.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:34.062Z,1513251874.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:34.077Z,1513251874.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:34.461Z,1513251874.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:34.475Z,1513251874.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:34.881Z,1513251874.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:34.907Z,1513251874.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:35.252Z,1513251875.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:35.271Z,1513251875.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:35.652Z,1513251875.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:35.666Z,1513251875.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:36.062Z,1513251876.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:36.077Z,1513251876.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:36.470Z,1513251876.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:36.484Z,1513251876.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:36.860Z,1513251876.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:36.876Z,1513251876.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:37.250Z,1513251877.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:37.270Z,1513251877.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:37.646Z,1513251877.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:37.676Z,1513251877.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:38.077Z,1513251878.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:38.122Z,1513251878.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:38.465Z,1513251878.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:38.480Z,1513251878.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:38.860Z,1513251878.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:38.877Z,1513251878.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:39.256Z,1513251879.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:39.270Z,1513251879.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:39.646Z,1513251879.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:39.677Z,1513251879.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:40.067Z,1513251880.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:40.087Z,1513251880.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:40.470Z,1513251880.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:40.485Z,1513251880.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:40.862Z,1513251880.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:40.918Z,1513251880.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:41.274Z,1513251881.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:41.347Z,1513251881.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:41.643Z,1513251881.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:41.674Z,1513251881.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:42.092Z,1513251882.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:42.191Z,1513251882.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:42.457Z,1513251882.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:42.487Z,1513251882.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:42.857Z,1513251882.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:42.921Z,1513251882.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:43.249Z,1513251883.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:43.284Z,1513251883.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:43.651Z,1513251883.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:43.683Z,1513251883.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:44.058Z,1513251884.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:44.092Z,1513251884.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:44.458Z,1513251884.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:44.509Z,1513251884.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:44.866Z,1513251884.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:44.889Z,1513251884.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:45.249Z,1513251885.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:45.264Z,1513251885.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:45.644Z,1513251885.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:45.668Z,1513251885.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:46.067Z,1513251886.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:46.096Z,1513251886.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:46.461Z,1513251886.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:46.476Z,1513251886.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:46.862Z,1513251886.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:46.876Z,1513251886.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:47.260Z,1513251887.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:47.345Z,1513251887.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:47.688Z,1513251887.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:47.745Z,1513251887.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:48.055Z,1513251888.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:48.075Z,1513251888.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:48.474Z,1513251888.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:48.499Z,1513251888.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:48.854Z,1513251888.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:48.875Z,1513251888.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:49.244Z,1513251889.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:49.264Z,1513251889.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:49.654Z,1513251889.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:49.668Z,1513251889.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:50.066Z,1513251890.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:50.080Z,1513251890.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:50.459Z,1513251890.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:50.479Z,1513251890.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:50.921Z,1513251890.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:50.984Z,1513251890.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:51.256Z,1513251891.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:51.271Z,1513251891.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:51.651Z,1513251891.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:51.667Z,1513251891.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:52.056Z,1513251892.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:52.072Z,1513251892.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:52.455Z,1513251892.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:52.470Z,1513251892.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:52.852Z,1513251892.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:52.871Z,1513251892.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:53.255Z,1513251893.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:53.270Z,1513251893.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:53.657Z,1513251893.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:53.671Z,1513251893.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:54.071Z,1513251894.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:54.104Z,1513251894.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:54.452Z,1513251894.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:54.471Z,1513251894.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:54.849Z,1513251894.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:54.870Z,1513251894.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:55.255Z,1513251895.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:55.271Z,1513251895.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:55.650Z,1513251895.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:55.664Z,1513251895.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:56.061Z,1513251896.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:56.075Z,1513251896.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:56.461Z,1513251896.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:56.483Z,1513251896.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:56.865Z,1513251896.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:56.880Z,1513251896.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:57.295Z,1513251897.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:57.339Z,1513251897.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:57.650Z,1513251897.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:57.672Z,1513251897.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:58.061Z,1513251898.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:58.075Z,1513251898.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:58.466Z,1513251898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:58.487Z,1513251898.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:58.865Z,1513251898.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:58.880Z,1513251898.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:59.253Z,1513251899.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:59.267Z,1513251899.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:44:59.650Z,1513251899.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:44:59.676Z,1513251899.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:00.064Z,1513251900.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:00.080Z,1513251900.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:00.498Z,1513251900.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:00.530Z,1513251900.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:00.862Z,1513251900.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:00.880Z,1513251900.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:01.246Z,1513251901.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:01.272Z,1513251901.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:01.643Z,1513251901.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:01.675Z,1513251901.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:02.062Z,1513251902.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:02.077Z,1513251902.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:02.465Z,1513251902.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:02.480Z,1513251902.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:02.858Z,1513251902.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:02.919Z,1513251902.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:03.244Z,1513251903.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:03.282Z,1513251903.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:03.640Z,1513251903.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:03.656Z,1513251903.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:04.053Z,1513251904.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:04.075Z,1513251904.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:04.457Z,1513251904.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:04.471Z,1513251904.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:04.870Z,1513251904.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:04.903Z,1513251904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:05.254Z,1513251905.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:05.268Z,1513251905.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:05.652Z,1513251905.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:05.667Z,1513251905.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:06.055Z,1513251906.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:06.063Z,1513251906.063 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:45:06.063Z,1513251906.063 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:45:06.063Z,1513251906.063 [BPC1](ERROR): Communications Fault
2017-12-14T11:45:06.075Z,1513251906.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:06.117Z,1513251906.117 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:45:06.458Z,1513251906.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:06.473Z,1513251906.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:06.860Z,1513251906.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:06.899Z,1513251906.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:07.243Z,1513251907.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:07.268Z,1513251907.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:07.282Z,1513251907.282 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:45:07.282Z,1513251907.282 [BPC1] No Fault, FailCount= 1
2017-12-14T11:45:07.642Z,1513251907.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:07.712Z,1513251907.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:08.066Z,1513251908.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:08.081Z,1513251908.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:08.469Z,1513251908.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:08.483Z,1513251908.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:08.858Z,1513251908.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:08.880Z,1513251908.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:09.243Z,1513251909.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:09.275Z,1513251909.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:09.636Z,1513251909.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:09.675Z,1513251909.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:10.085Z,1513251910.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:10.117Z,1513251910.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:10.472Z,1513251910.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:10.491Z,1513251910.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:10.858Z,1513251910.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:10.885Z,1513251910.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:11.243Z,1513251911.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:11.258Z,1513251911.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:11.647Z,1513251911.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:11.691Z,1513251911.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:11.691Z,1513251911.691 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 224
2017-12-14T11:45:11.691Z,1513251911.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:45:11.693Z,1513251911.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:11.693Z,1513251911.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 224
2017-12-14T11:45:11.693Z,1513251911.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:45:11.695Z,1513251911.695 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:11.695Z,1513251911.695 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 224
2017-12-14T11:45:11.695Z,1513251911.695 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:45:11.707Z,1513251911.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:45:11.707Z,1513251911.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:45:11.707Z,1513251911.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:45:12.061Z,1513251912.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:12.096Z,1513251912.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:45:12.096Z,1513251912.096 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 224
2017-12-14T11:45:12.096Z,1513251912.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:45:12.096Z,1513251912.096 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 224
2017-12-14T11:45:12.097Z,1513251912.097 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:45:12.097Z,1513251912.097 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 224
2017-12-14T11:45:12.461Z,1513251912.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:12.489Z,1513251912.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:45:12.490Z,1513251912.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:45:12.490Z,1513251912.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:45:12.491Z,1513251912.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:45:12.491Z,1513251912.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:45:12.491Z,1513251912.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:45:12.492Z,1513251912.492 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:45:12.492Z,1513251912.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:45:12.492Z,1513251912.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:45:12.862Z,1513251912.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:12.888Z,1513251912.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:13.294Z,1513251913.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:13.343Z,1513251913.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:13.651Z,1513251913.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:13.665Z,1513251913.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:14.061Z,1513251914.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:14.088Z,1513251914.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:14.457Z,1513251914.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:14.486Z,1513251914.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:14.865Z,1513251914.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:14.895Z,1513251914.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:15.248Z,1513251915.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:15.264Z,1513251915.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:15.643Z,1513251915.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:15.658Z,1513251915.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:16.061Z,1513251916.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:16.108Z,1513251916.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:16.490Z,1513251916.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:16.517Z,1513251916.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:16.866Z,1513251916.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:16.890Z,1513251916.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:17.250Z,1513251917.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:17.265Z,1513251917.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:17.652Z,1513251917.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:17.667Z,1513251917.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:18.058Z,1513251918.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:18.095Z,1513251918.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:18.457Z,1513251918.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:18.479Z,1513251918.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:18.858Z,1513251918.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:18.872Z,1513251918.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:19.254Z,1513251919.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:19.269Z,1513251919.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:19.692Z,1513251919.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:19.795Z,1513251919.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:20.066Z,1513251920.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:20.100Z,1513251920.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:20.465Z,1513251920.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:20.499Z,1513251920.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:20.869Z,1513251920.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:20.904Z,1513251920.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:21.246Z,1513251921.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:21.273Z,1513251921.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:21.657Z,1513251921.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:21.672Z,1513251921.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:22.063Z,1513251922.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:22.079Z,1513251922.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:22.462Z,1513251922.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:22.483Z,1513251922.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:22.858Z,1513251922.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:22.887Z,1513251922.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:23.257Z,1513251923.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:23.272Z,1513251923.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:23.665Z,1513251923.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:23.680Z,1513251923.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:24.066Z,1513251924.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:24.087Z,1513251924.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:24.468Z,1513251924.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:24.487Z,1513251924.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:24.864Z,1513251924.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:24.880Z,1513251924.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:25.243Z,1513251925.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:25.280Z,1513251925.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:25.647Z,1513251925.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:25.672Z,1513251925.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:29.171Z,1513251929.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:29.245Z,1513251929.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:29.354Z,1513251929.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:29.391Z,1513251929.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:29.736Z,1513251929.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:29.794Z,1513251929.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:30.131Z,1513251930.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:30.160Z,1513251930.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:30.515Z,1513251930.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:30.576Z,1513251930.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:30.915Z,1513251930.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:30.951Z,1513251930.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:31.342Z,1513251931.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:31.356Z,1513251931.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:31.735Z,1513251931.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:31.750Z,1513251931.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:32.133Z,1513251932.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:32.156Z,1513251932.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:32.515Z,1513251932.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:32.547Z,1513251932.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:32.913Z,1513251932.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:32.936Z,1513251932.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:33.322Z,1513251933.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:33.361Z,1513251933.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:33.715Z,1513251933.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:33.730Z,1513251933.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:34.125Z,1513251934.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:34.160Z,1513251934.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:34.548Z,1513251934.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:34.564Z,1513251934.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:34.937Z,1513251934.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:34.969Z,1513251934.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:35.317Z,1513251935.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:35.332Z,1513251935.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:35.723Z,1513251935.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:35.738Z,1513251935.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:36.124Z,1513251936.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:36.138Z,1513251936.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:36.533Z,1513251936.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:36.572Z,1513251936.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:36.922Z,1513251936.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:36.939Z,1513251936.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:37.332Z,1513251937.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:37.348Z,1513251937.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:37.733Z,1513251937.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:37.748Z,1513251937.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:38.133Z,1513251938.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:38.148Z,1513251938.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:38.525Z,1513251938.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:38.539Z,1513251938.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:38.919Z,1513251938.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:38.982Z,1513251938.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:39.323Z,1513251939.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:39.337Z,1513251939.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:39.723Z,1513251939.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:39.737Z,1513251939.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:40.136Z,1513251940.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:40.151Z,1513251940.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:40.538Z,1513251940.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:40.559Z,1513251940.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:40.937Z,1513251940.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:40.959Z,1513251940.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:41.308Z,1513251941.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:41.342Z,1513251941.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:41.727Z,1513251941.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:41.741Z,1513251941.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:42.128Z,1513251942.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:42.142Z,1513251942.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:42.516Z,1513251942.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:42.543Z,1513251942.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:42.940Z,1513251942.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:42.984Z,1513251942.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:43.334Z,1513251943.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:43.349Z,1513251943.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:43.733Z,1513251943.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:43.748Z,1513251943.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:44.133Z,1513251944.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:44.148Z,1513251944.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:44.515Z,1513251944.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:44.551Z,1513251944.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:44.920Z,1513251944.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:44.947Z,1513251944.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:45.315Z,1513251945.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:45.346Z,1513251945.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:45.715Z,1513251945.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:45.740Z,1513251945.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:46.125Z,1513251946.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:46.168Z,1513251946.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:46.537Z,1513251946.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:46.559Z,1513251946.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:46.941Z,1513251946.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:46.956Z,1513251946.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:47.315Z,1513251947.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:47.346Z,1513251947.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:47.719Z,1513251947.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:47.754Z,1513251947.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:48.121Z,1513251948.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:48.140Z,1513251948.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:48.520Z,1513251948.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:48.546Z,1513251948.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:48.919Z,1513251948.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:48.979Z,1513251948.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:49.326Z,1513251949.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:49.353Z,1513251949.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:49.732Z,1513251949.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:49.747Z,1513251949.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:50.132Z,1513251950.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:50.199Z,1513251950.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:50.527Z,1513251950.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:50.542Z,1513251950.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:50.930Z,1513251950.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:50.979Z,1513251950.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:51.320Z,1513251951.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:51.336Z,1513251951.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:51.721Z,1513251951.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:51.771Z,1513251951.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:52.133Z,1513251952.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:52.158Z,1513251952.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:52.549Z,1513251952.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:52.611Z,1513251952.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:52.934Z,1513251952.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:52.958Z,1513251952.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:53.320Z,1513251953.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:53.334Z,1513251953.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:53.718Z,1513251953.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:53.732Z,1513251953.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:54.121Z,1513251954.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:54.136Z,1513251954.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:54.522Z,1513251954.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:54.540Z,1513251954.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:54.920Z,1513251954.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:54.939Z,1513251954.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:55.333Z,1513251955.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:55.367Z,1513251955.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:55.723Z,1513251955.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:55.775Z,1513251955.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:56.138Z,1513251956.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:56.167Z,1513251956.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:56.524Z,1513251956.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:56.538Z,1513251956.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:56.922Z,1513251956.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:56.936Z,1513251956.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:57.321Z,1513251957.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:57.336Z,1513251957.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:57.723Z,1513251957.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:57.738Z,1513251957.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:58.139Z,1513251958.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:58.171Z,1513251958.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:58.545Z,1513251958.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:58.575Z,1513251958.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:58.940Z,1513251958.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:58.975Z,1513251958.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:59.323Z,1513251959.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:59.343Z,1513251959.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:45:59.726Z,1513251959.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:45:59.741Z,1513251959.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:00.129Z,1513251960.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:00.151Z,1513251960.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:00.523Z,1513251960.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:00.539Z,1513251960.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:00.931Z,1513251960.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:00.987Z,1513251960.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:01.330Z,1513251961.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:01.345Z,1513251961.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:01.730Z,1513251961.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:01.744Z,1513251961.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:02.147Z,1513251962.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:02.190Z,1513251962.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:02.526Z,1513251962.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:02.547Z,1513251962.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:02.922Z,1513251962.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:02.943Z,1513251962.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:03.323Z,1513251963.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:03.338Z,1513251963.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:03.727Z,1513251963.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:03.742Z,1513251963.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:04.133Z,1513251964.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:04.155Z,1513251964.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:04.533Z,1513251964.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:04.547Z,1513251964.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:04.950Z,1513251964.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:04.971Z,1513251964.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:05.319Z,1513251965.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:05.350Z,1513251965.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:05.714Z,1513251965.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:05.757Z,1513251965.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:05.854Z,1513251965.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:06.115Z,1513251966.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:06.150Z,1513251966.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:06.516Z,1513251966.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:06.547Z,1513251966.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:06.651Z,1513251966.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:06.919Z,1513251966.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:06.955Z,1513251966.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:07.057Z,1513251967.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:07.327Z,1513251967.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:07.359Z,1513251967.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:07.731Z,1513251967.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:07.756Z,1513251967.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:07.854Z,1513251967.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:08.134Z,1513251968.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:08.157Z,1513251968.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:08.523Z,1513251968.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:08.554Z,1513251968.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:08.649Z,1513251968.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:08.923Z,1513251968.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:08.938Z,1513251968.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:09.053Z,1513251969.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:09.323Z,1513251969.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:09.339Z,1513251969.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:09.726Z,1513251969.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:09.742Z,1513251969.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:09.854Z,1513251969.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:10.135Z,1513251970.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:10.172Z,1513251970.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:10.537Z,1513251970.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:10.567Z,1513251970.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:10.653Z,1513251970.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:10.930Z,1513251970.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:11.030Z,1513251971.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:11.057Z,1513251971.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:11.316Z,1513251971.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:11.335Z,1513251971.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:11.723Z,1513251971.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:11.782Z,1513251971.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:11.853Z,1513251971.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:12.122Z,1513251972.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:12.136Z,1513251972.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:12.522Z,1513251972.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:12.571Z,1513251972.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:12.650Z,1513251972.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:12.925Z,1513251972.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:12.982Z,1513251972.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:13.053Z,1513251973.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:13.334Z,1513251973.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:13.349Z,1513251973.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:13.735Z,1513251973.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:13.750Z,1513251973.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:14.133Z,1513251974.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:14.178Z,1513251974.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:14.523Z,1513251974.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:14.543Z,1513251974.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:14.918Z,1513251974.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:14.978Z,1513251974.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:15.323Z,1513251975.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:15.348Z,1513251975.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:15.742Z,1513251975.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:15.776Z,1513251975.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:16.136Z,1513251976.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:16.151Z,1513251976.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:16.538Z,1513251976.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:16.554Z,1513251976.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:16.967Z,1513251976.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:17.015Z,1513251977.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:17.319Z,1513251977.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:17.339Z,1513251977.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:17.736Z,1513251977.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:17.790Z,1513251977.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:18.118Z,1513251978.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:18.143Z,1513251978.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:18.523Z,1513251978.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:18.538Z,1513251978.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:18.965Z,1513251978.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:19.034Z,1513251979.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:19.337Z,1513251979.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:19.388Z,1513251979.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:19.742Z,1513251979.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:19.775Z,1513251979.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:19.870Z,1513251979.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:20.127Z,1513251980.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:20.164Z,1513251980.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:20.525Z,1513251980.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:20.586Z,1513251980.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:20.666Z,1513251980.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:20.929Z,1513251980.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:20.958Z,1513251980.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:21.070Z,1513251981.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:21.335Z,1513251981.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:21.358Z,1513251981.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:21.728Z,1513251981.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:21.791Z,1513251981.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:21.867Z,1513251981.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:22.138Z,1513251982.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:22.163Z,1513251982.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:22.537Z,1513251982.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:22.606Z,1513251982.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:22.662Z,1513251982.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:22.932Z,1513251982.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:22.960Z,1513251982.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:23.066Z,1513251983.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:23.318Z,1513251983.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:23.415Z,1513251983.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:23.715Z,1513251983.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:23.753Z,1513251983.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:23.862Z,1513251983.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:24.125Z,1513251984.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:24.188Z,1513251984.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:24.521Z,1513251984.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:24.560Z,1513251984.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:24.658Z,1513251984.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:24.925Z,1513251984.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:24.967Z,1513251984.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:25.062Z,1513251985.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:25.343Z,1513251985.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:25.367Z,1513251985.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:25.737Z,1513251985.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:25.779Z,1513251985.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:25.858Z,1513251985.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:26.655Z,1513251986.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:27.061Z,1513251987.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:30.527Z,1513251990.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:30.573Z,1513251990.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:30.757Z,1513251990.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:30.788Z,1513251990.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:31.117Z,1513251991.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:31.165Z,1513251991.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:31.552Z,1513251991.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:31.598Z,1513251991.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:31.878Z,1513251991.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:31.930Z,1513251991.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:31.974Z,1513251991.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:32.344Z,1513251992.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:32.427Z,1513251992.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:32.674Z,1513251992.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:32.749Z,1513251992.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:32.792Z,1513251992.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:33.077Z,1513251993.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:33.137Z,1513251993.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:33.167Z,1513251993.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:33.516Z,1513251993.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:33.551Z,1513251993.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:33.874Z,1513251993.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:33.963Z,1513251993.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:34.051Z,1513251994.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:34.373Z,1513251994.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:34.429Z,1513251994.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:34.670Z,1513251994.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:34.724Z,1513251994.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:34.771Z,1513251994.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:35.073Z,1513251995.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:35.131Z,1513251995.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:35.172Z,1513251995.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:35.535Z,1513251995.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:35.624Z,1513251995.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:35.870Z,1513251995.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:35.931Z,1513251995.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:35.980Z,1513251995.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:36.346Z,1513251996.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:36.403Z,1513251996.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:36.667Z,1513251996.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:36.748Z,1513251996.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:36.790Z,1513251996.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:37.070Z,1513251997.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:37.144Z,1513251997.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:37.199Z,1513251997.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:37.517Z,1513251997.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:37.559Z,1513251997.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:37.866Z,1513251997.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:37.916Z,1513251997.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:37.955Z,1513251997.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:38.351Z,1513251998.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:38.392Z,1513251998.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:38.662Z,1513251998.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:38.759Z,1513251998.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:38.783Z,1513251998.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:39.065Z,1513251999.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:39.134Z,1513251999.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:39.159Z,1513251999.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:39.516Z,1513251999.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:39.549Z,1513251999.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:39.862Z,1513251999.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:39.916Z,1513251999.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:39.950Z,1513251999.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:40.349Z,1513252000.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:40.405Z,1513252000.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:40.658Z,1513252000.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:40.718Z,1513252000.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:40.752Z,1513252000.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:41.062Z,1513252001.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:41.136Z,1513252001.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:41.164Z,1513252001.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:41.539Z,1513252001.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:41.554Z,1513252001.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:41.858Z,1513252001.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:41.936Z,1513252001.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:41.963Z,1513252001.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:42.347Z,1513252002.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:42.442Z,1513252002.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:42.654Z,1513252002.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:42.738Z,1513252002.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:42.773Z,1513252002.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:43.058Z,1513252003.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:43.138Z,1513252003.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:43.170Z,1513252003.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:43.524Z,1513252003.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:43.547Z,1513252003.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:43.856Z,1513252003.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:43.926Z,1513252003.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:43.949Z,1513252003.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:44.335Z,1513252004.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:44.410Z,1513252004.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:44.651Z,1513252004.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:44.770Z,1513252004.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:44.794Z,1513252004.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:45.062Z,1513252005.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:45.146Z,1513252005.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:45.187Z,1513252005.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:45.524Z,1513252005.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:45.585Z,1513252005.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:45.858Z,1513252005.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:45.925Z,1513252005.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:45.948Z,1513252005.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:46.325Z,1513252006.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:46.386Z,1513252006.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:46.655Z,1513252006.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:46.727Z,1513252006.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:46.747Z,1513252006.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:47.069Z,1513252007.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:47.136Z,1513252007.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:47.151Z,1513252007.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:47.533Z,1513252007.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:47.549Z,1513252007.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:47.866Z,1513252007.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:47.932Z,1513252007.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:47.972Z,1513252007.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:48.348Z,1513252008.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:48.390Z,1513252008.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:48.661Z,1513252008.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:48.715Z,1513252008.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:48.747Z,1513252008.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:49.065Z,1513252009.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:49.114Z,1513252009.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:49.135Z,1513252009.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:49.517Z,1513252009.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:49.531Z,1513252009.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:49.862Z,1513252009.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:49.916Z,1513252009.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:49.931Z,1513252009.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:50.368Z,1513252010.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:50.383Z,1513252010.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:50.658Z,1513252010.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:50.730Z,1513252010.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:50.746Z,1513252010.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:51.061Z,1513252011.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:51.130Z,1513252011.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:51.144Z,1513252011.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:51.547Z,1513252011.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:51.563Z,1513252011.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:51.857Z,1513252011.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:51.908Z,1513252011.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:51.923Z,1513252011.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:52.353Z,1513252012.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:52.373Z,1513252012.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:52.653Z,1513252012.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:52.716Z,1513252012.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:52.732Z,1513252012.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:53.057Z,1513252013.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:53.129Z,1513252013.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:53.144Z,1513252013.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:53.530Z,1513252013.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:53.544Z,1513252013.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:53.854Z,1513252013.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:53.929Z,1513252013.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:53.951Z,1513252013.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:54.344Z,1513252014.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:54.372Z,1513252014.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:54.651Z,1513252014.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:54.718Z,1513252014.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:54.732Z,1513252014.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:55.053Z,1513252015.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:55.134Z,1513252015.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:55.151Z,1513252015.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:55.515Z,1513252015.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:55.535Z,1513252015.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:55.850Z,1513252015.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:55.916Z,1513252015.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:55.980Z,1513252015.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:56.349Z,1513252016.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:56.398Z,1513252016.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:56.645Z,1513252016.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:56.729Z,1513252016.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:56.771Z,1513252016.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:57.049Z,1513252017.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:57.130Z,1513252017.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:57.144Z,1513252017.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:57.516Z,1513252017.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:57.559Z,1513252017.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:57.847Z,1513252017.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:57.912Z,1513252017.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:57.926Z,1513252017.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:58.316Z,1513252018.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:58.374Z,1513252018.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:58.646Z,1513252018.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:58.718Z,1513252018.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:58.739Z,1513252018.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:59.069Z,1513252019.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:59.129Z,1513252019.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:59.175Z,1513252019.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:59.565Z,1513252019.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:59.580Z,1513252019.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:46:59.866Z,1513252019.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:59.930Z,1513252019.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:46:59.952Z,1513252019.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:00.316Z,1513252020.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:00.331Z,1513252020.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:00.663Z,1513252020.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:00.715Z,1513252020.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:00.735Z,1513252020.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:01.065Z,1513252021.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:01.116Z,1513252021.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:01.131Z,1513252021.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:01.517Z,1513252021.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:01.563Z,1513252021.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:01.862Z,1513252021.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:01.916Z,1513252021.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:01.931Z,1513252021.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:02.358Z,1513252022.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:02.373Z,1513252022.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:02.657Z,1513252022.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:02.730Z,1513252022.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:02.746Z,1513252022.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:03.061Z,1513252023.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:03.126Z,1513252023.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:03.141Z,1513252023.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:03.515Z,1513252023.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:03.530Z,1513252023.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:03.857Z,1513252023.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:03.916Z,1513252023.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:03.931Z,1513252023.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:04.341Z,1513252024.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:04.369Z,1513252024.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:04.654Z,1513252024.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:04.719Z,1513252024.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:04.739Z,1513252024.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:05.057Z,1513252025.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:05.134Z,1513252025.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:05.195Z,1513252025.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:05.531Z,1513252025.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:05.563Z,1513252025.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:05.854Z,1513252025.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:05.927Z,1513252025.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:05.952Z,1513252025.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:06.334Z,1513252026.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:06.368Z,1513252026.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:06.649Z,1513252026.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:06.715Z,1513252026.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:06.743Z,1513252026.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:07.053Z,1513252027.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:07.124Z,1513252027.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:07.143Z,1513252027.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:07.517Z,1513252027.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:07.556Z,1513252027.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:07.850Z,1513252027.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:07.917Z,1513252027.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:07.951Z,1513252027.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:08.358Z,1513252028.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:08.393Z,1513252028.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:08.645Z,1513252028.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:08.764Z,1513252028.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:08.818Z,1513252028.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:09.050Z,1513252029.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:09.126Z,1513252029.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:09.165Z,1513252029.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:09.516Z,1513252029.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:09.540Z,1513252029.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:09.845Z,1513252029.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:09.915Z,1513252029.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:09.930Z,1513252029.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:10.348Z,1513252030.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:10.411Z,1513252030.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:10.647Z,1513252030.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:10.722Z,1513252030.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:10.766Z,1513252030.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:11.053Z,1513252031.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:11.131Z,1513252031.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:11.185Z,1513252031.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:11.521Z,1513252031.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:11.536Z,1513252031.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:11.850Z,1513252031.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:11.938Z,1513252031.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:11.969Z,1513252031.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:12.380Z,1513252032.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:12.413Z,1513252032.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:12.654Z,1513252032.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:12.735Z,1513252032.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:12.767Z,1513252032.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:13.061Z,1513252033.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:13.126Z,1513252033.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:13.141Z,1513252033.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:13.524Z,1513252033.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:13.538Z,1513252033.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:13.857Z,1513252033.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:13.928Z,1513252033.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:13.943Z,1513252033.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:14.338Z,1513252034.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:14.370Z,1513252034.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:14.655Z,1513252034.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:14.733Z,1513252034.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:14.763Z,1513252034.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:15.069Z,1513252035.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:15.148Z,1513252035.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:15.176Z,1513252035.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:15.522Z,1513252035.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:15.537Z,1513252035.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:15.866Z,1513252035.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:15.927Z,1513252035.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:15.942Z,1513252035.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:16.347Z,1513252036.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:16.379Z,1513252036.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:16.661Z,1513252036.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:16.735Z,1513252036.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:16.751Z,1513252036.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:17.065Z,1513252037.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:17.138Z,1513252037.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:17.159Z,1513252037.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:17.537Z,1513252037.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:17.552Z,1513252037.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:17.862Z,1513252037.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:17.936Z,1513252037.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:17.952Z,1513252037.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:18.353Z,1513252038.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:18.399Z,1513252038.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:18.657Z,1513252038.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:18.723Z,1513252038.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:18.742Z,1513252038.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:19.061Z,1513252039.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:19.119Z,1513252039.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:19.159Z,1513252039.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:19.519Z,1513252039.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:19.580Z,1513252039.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:19.857Z,1513252039.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:19.918Z,1513252039.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:19.946Z,1513252039.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:20.352Z,1513252040.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:20.389Z,1513252040.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:20.653Z,1513252040.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:20.736Z,1513252040.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:20.790Z,1513252040.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:21.057Z,1513252041.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:21.134Z,1513252041.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:21.150Z,1513252041.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:21.516Z,1513252041.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:21.573Z,1513252041.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:21.854Z,1513252041.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:21.929Z,1513252041.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:21.944Z,1513252041.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:22.349Z,1513252042.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:22.383Z,1513252042.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:22.649Z,1513252042.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:22.715Z,1513252042.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:22.748Z,1513252042.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:23.053Z,1513252043.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:23.138Z,1513252043.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:23.154Z,1513252043.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:23.530Z,1513252043.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:23.586Z,1513252043.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:23.850Z,1513252043.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:23.934Z,1513252043.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:23.950Z,1513252043.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:24.350Z,1513252044.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:24.430Z,1513252044.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:24.646Z,1513252044.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:24.720Z,1513252044.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:24.756Z,1513252044.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:25.051Z,1513252045.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:25.124Z,1513252045.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:25.155Z,1513252045.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:25.159Z,1513252045.159 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:42:24.8Z
2017-12-14T11:47:25.159Z,1513252045.159 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:47:25.159Z,1513252045.159 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:47:25.516Z,1513252045.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:25.550Z,1513252045.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:25.847Z,1513252045.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:26.295Z,1513252046.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:26.323Z,1513252046.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:26.644Z,1513252046.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:27.073Z,1513252047.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:27.870Z,1513252047.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:28.666Z,1513252048.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:29.069Z,1513252049.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:29.542Z,1513252049.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:29.596Z,1513252049.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:29.673Z,1513252049.673 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0260.lzma
2017-12-14T11:47:29.715Z,1513252049.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:29.758Z,1513252049.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:29.866Z,1513252049.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:30.070Z,1513252050.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:30.091Z,1513252050.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:30.440Z,1513252050.440 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0260.lzma.bak
2017-12-14T11:47:30.440Z,1513252050.440 [DataOverHttps](INFO): SBD MOMSN=5438662
2017-12-14T11:47:30.478Z,1513252050.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:30.519Z,1513252050.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:30.661Z,1513252050.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:31.065Z,1513252051.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:31.719Z,1513252051.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:31.739Z,1513252051.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:31.856Z,1513252051.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:31.862Z,1513252051.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:31.879Z,1513252051.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:32.658Z,1513252052.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:33.061Z,1513252053.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:33.858Z,1513252053.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:34.653Z,1513252054.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:35.057Z,1513252055.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:35.467Z,1513252055.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:35.515Z,1513252055.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:35.629Z,1513252055.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:35.672Z,1513252055.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:35.854Z,1513252055.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:36.010Z,1513252056.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:36.025Z,1513252056.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:36.406Z,1513252056.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:36.432Z,1513252056.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:36.649Z,1513252056.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:36.799Z,1513252056.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:36.815Z,1513252056.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:37.053Z,1513252057.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:37.203Z,1513252057.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:37.218Z,1513252057.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:37.850Z,1513252057.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:38.646Z,1513252058.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:39.049Z,1513252059.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:39.846Z,1513252059.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:40.642Z,1513252060.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:40.667Z,1513252060.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:40.741Z,1513252060.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:40.813Z,1513252060.813 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0261.lzma
2017-12-14T11:47:40.841Z,1513252060.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:40.880Z,1513252060.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:41.105Z,1513252061.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:41.241Z,1513252061.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:41.267Z,1513252061.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:41.612Z,1513252061.612 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0261.lzma.bak
2017-12-14T11:47:41.612Z,1513252061.612 [DataOverHttps](INFO): SBD MOMSN=5438666
2017-12-14T11:47:41.645Z,1513252061.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:41.677Z,1513252061.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:41.904Z,1513252061.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:42.698Z,1513252062.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:43.008Z,1513252063.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:43.023Z,1513252063.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:43.026Z,1513252063.026 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:47:43.026Z,1513252063.026 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:47:43.026Z,1513252063.026 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:47:43.101Z,1513252063.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:43.128Z,1513252063.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:43.151Z,1513252063.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:43.898Z,1513252063.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:44.694Z,1513252064.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:45.097Z,1513252065.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:45.894Z,1513252065.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:46.622Z,1513252066.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:46.637Z,1513252066.637 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:47:46.637Z,1513252066.637 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:47:46.637Z,1513252066.637 [BPC1](ERROR): Communications Fault
2017-12-14T11:47:46.644Z,1513252066.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:46.690Z,1513252066.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:46.692Z,1513252066.692 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:47:46.760Z,1513252066.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:46.795Z,1513252066.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:47.093Z,1513252067.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:47.148Z,1513252067.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:47.164Z,1513252067.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:47.550Z,1513252067.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:47.567Z,1513252067.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:47.602Z,1513252067.602 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:47:47.602Z,1513252067.602 [BPC1] No Fault, FailCount= 1
2017-12-14T11:47:47.889Z,1513252067.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:47.949Z,1513252067.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:48.029Z,1513252068.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:48.348Z,1513252068.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:48.386Z,1513252068.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:48.685Z,1513252068.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:48.744Z,1513252068.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:48.764Z,1513252068.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:49.193Z,1513252069.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:49.245Z,1513252069.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:49.483Z,1513252069.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:49.537Z,1513252069.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:49.565Z,1513252069.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:49.946Z,1513252069.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:49.960Z,1513252069.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:50.279Z,1513252070.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:50.368Z,1513252070.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:50.400Z,1513252070.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:50.685Z,1513252070.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:50.758Z,1513252070.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:50.787Z,1513252070.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:51.089Z,1513252071.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:51.153Z,1513252071.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:51.183Z,1513252071.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:51.534Z,1513252071.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:51.554Z,1513252071.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:51.885Z,1513252071.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:51.935Z,1513252071.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:51.959Z,1513252071.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:52.416Z,1513252072.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:52.459Z,1513252072.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:52.684Z,1513252072.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:52.731Z,1513252072.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:52.775Z,1513252072.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:53.089Z,1513252073.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:53.154Z,1513252073.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:53.170Z,1513252073.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:53.555Z,1513252073.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:53.569Z,1513252073.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:53.885Z,1513252073.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:53.938Z,1513252073.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:53.961Z,1513252073.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:54.336Z,1513252074.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:54.351Z,1513252074.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:54.682Z,1513252074.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:54.744Z,1513252074.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:54.778Z,1513252074.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:55.085Z,1513252075.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:55.139Z,1513252075.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:55.176Z,1513252075.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:55.538Z,1513252075.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:55.554Z,1513252075.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:55.882Z,1513252075.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:55.943Z,1513252075.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:55.957Z,1513252075.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:56.346Z,1513252076.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:56.433Z,1513252076.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:56.678Z,1513252076.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:56.765Z,1513252076.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:56.790Z,1513252076.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:57.081Z,1513252077.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:57.148Z,1513252077.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:57.162Z,1513252077.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:57.542Z,1513252077.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:57.559Z,1513252077.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:57.878Z,1513252077.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:57.947Z,1513252077.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:57.962Z,1513252077.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:58.349Z,1513252078.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:58.363Z,1513252078.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:58.675Z,1513252078.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:58.768Z,1513252078.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:58.811Z,1513252078.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:59.081Z,1513252079.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:59.156Z,1513252079.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:59.171Z,1513252079.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:59.556Z,1513252079.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:59.571Z,1513252079.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:47:59.878Z,1513252079.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:59.942Z,1513252079.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:47:59.986Z,1513252079.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:00.362Z,1513252080.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:00.387Z,1513252080.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:00.674Z,1513252080.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:00.736Z,1513252080.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:00.763Z,1513252080.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:01.077Z,1513252081.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:01.139Z,1513252081.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:01.170Z,1513252081.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:01.539Z,1513252081.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:01.555Z,1513252081.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:01.874Z,1513252081.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:01.944Z,1513252081.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:01.983Z,1513252081.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:02.357Z,1513252082.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:02.383Z,1513252082.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:02.669Z,1513252082.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:02.767Z,1513252082.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:02.787Z,1513252082.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:03.074Z,1513252083.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:03.149Z,1513252083.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:03.176Z,1513252083.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:03.579Z,1513252083.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:03.600Z,1513252083.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:03.870Z,1513252083.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:03.944Z,1513252083.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:03.983Z,1513252083.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:04.360Z,1513252084.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:04.452Z,1513252084.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:04.665Z,1513252084.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:04.743Z,1513252084.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:04.759Z,1513252084.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:05.069Z,1513252085.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:05.172Z,1513252085.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:05.201Z,1513252085.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:05.562Z,1513252085.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:05.598Z,1513252085.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:05.866Z,1513252085.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:05.950Z,1513252085.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:05.971Z,1513252085.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:06.399Z,1513252086.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:06.427Z,1513252086.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:06.661Z,1513252086.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:06.731Z,1513252086.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:06.767Z,1513252086.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:07.065Z,1513252087.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:07.135Z,1513252087.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:07.225Z,1513252087.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:07.531Z,1513252087.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:07.562Z,1513252087.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:07.861Z,1513252087.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:07.934Z,1513252087.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:07.968Z,1513252087.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:08.404Z,1513252088.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:08.487Z,1513252088.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:08.659Z,1513252088.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:08.773Z,1513252088.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:08.795Z,1513252088.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:09.074Z,1513252089.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:09.154Z,1513252089.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:09.224Z,1513252089.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:09.536Z,1513252089.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:09.559Z,1513252089.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:09.870Z,1513252089.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:09.939Z,1513252089.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:09.955Z,1513252089.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:10.341Z,1513252090.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:10.355Z,1513252090.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:10.668Z,1513252090.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:10.751Z,1513252090.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:10.798Z,1513252090.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:11.074Z,1513252091.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:11.150Z,1513252091.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:11.181Z,1513252091.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:11.563Z,1513252091.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:11.635Z,1513252091.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:11.870Z,1513252091.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:11.946Z,1513252091.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:11.960Z,1513252091.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:12.354Z,1513252092.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:12.389Z,1513252092.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:12.665Z,1513252092.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:12.736Z,1513252092.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:12.768Z,1513252092.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:12.769Z,1513252092.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 225
2017-12-14T11:48:12.769Z,1513252092.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:48:12.771Z,1513252092.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:12.771Z,1513252092.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 225
2017-12-14T11:48:12.771Z,1513252092.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:48:12.773Z,1513252092.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:12.773Z,1513252092.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 225
2017-12-14T11:48:12.773Z,1513252092.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:48:12.802Z,1513252092.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:48:12.802Z,1513252092.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:48:12.802Z,1513252092.802 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:48:13.069Z,1513252093.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:13.131Z,1513252093.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:13.174Z,1513252093.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:48:13.174Z,1513252093.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 225
2017-12-14T11:48:13.174Z,1513252093.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:48:13.174Z,1513252093.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 225
2017-12-14T11:48:13.175Z,1513252093.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:48:13.175Z,1513252093.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 225
2017-12-14T11:48:13.531Z,1513252093.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:13.563Z,1513252093.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:48:13.563Z,1513252093.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:48:13.564Z,1513252093.564 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:48:13.564Z,1513252093.564 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:48:13.564Z,1513252093.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:48:13.569Z,1513252093.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:48:13.569Z,1513252093.569 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:48:13.570Z,1513252093.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:48:13.570Z,1513252093.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:48:13.865Z,1513252093.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:13.930Z,1513252093.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:13.969Z,1513252093.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:14.372Z,1513252094.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:14.387Z,1513252094.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:14.669Z,1513252094.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:14.788Z,1513252094.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:14.812Z,1513252094.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:15.073Z,1513252095.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:15.146Z,1513252095.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:15.167Z,1513252095.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:15.535Z,1513252095.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:15.558Z,1513252095.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:15.873Z,1513252095.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:15.944Z,1513252095.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:15.961Z,1513252095.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:16.357Z,1513252096.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:16.379Z,1513252096.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:16.669Z,1513252096.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:16.734Z,1513252096.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:16.761Z,1513252096.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:17.073Z,1513252097.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:17.154Z,1513252097.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:17.169Z,1513252097.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:17.556Z,1513252097.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:17.601Z,1513252097.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:17.869Z,1513252097.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:17.960Z,1513252097.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:18.010Z,1513252098.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:18.352Z,1513252098.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:18.397Z,1513252098.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:18.665Z,1513252098.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:18.731Z,1513252098.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:18.767Z,1513252098.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:19.069Z,1513252099.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:19.135Z,1513252099.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:19.167Z,1513252099.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:19.532Z,1513252099.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:19.560Z,1513252099.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:19.865Z,1513252099.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:19.943Z,1513252099.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:19.970Z,1513252099.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:20.387Z,1513252100.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:20.415Z,1513252100.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:20.661Z,1513252100.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:20.758Z,1513252100.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:20.837Z,1513252100.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:21.065Z,1513252101.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:21.163Z,1513252101.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:21.195Z,1513252101.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:21.526Z,1513252101.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:21.547Z,1513252101.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:21.862Z,1513252101.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:21.937Z,1513252101.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:21.961Z,1513252101.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:22.338Z,1513252102.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:22.353Z,1513252102.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:22.659Z,1513252102.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:22.742Z,1513252102.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:22.758Z,1513252102.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:23.065Z,1513252103.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:23.142Z,1513252103.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:23.159Z,1513252103.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:23.546Z,1513252103.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:23.561Z,1513252103.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:23.862Z,1513252103.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:23.942Z,1513252103.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:23.963Z,1513252103.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:24.380Z,1513252104.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:24.407Z,1513252104.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:24.659Z,1513252104.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:24.747Z,1513252104.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:24.767Z,1513252104.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:25.065Z,1513252105.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:25.140Z,1513252105.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:25.156Z,1513252105.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:25.536Z,1513252105.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:25.559Z,1513252105.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:25.861Z,1513252105.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:25.939Z,1513252105.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:25.963Z,1513252105.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:26.358Z,1513252106.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:26.401Z,1513252106.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:26.657Z,1513252106.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:26.750Z,1513252106.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:26.774Z,1513252106.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:27.061Z,1513252107.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:27.210Z,1513252107.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:27.299Z,1513252107.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:27.553Z,1513252107.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:27.601Z,1513252107.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:27.858Z,1513252107.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:27.952Z,1513252107.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:28.014Z,1513252108.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:28.359Z,1513252108.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:28.378Z,1513252108.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:28.653Z,1513252108.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:28.730Z,1513252108.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:28.767Z,1513252108.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:29.057Z,1513252109.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:29.164Z,1513252109.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:29.179Z,1513252109.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:29.561Z,1513252109.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:29.624Z,1513252109.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:29.853Z,1513252109.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:29.942Z,1513252109.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:29.974Z,1513252109.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:30.366Z,1513252110.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:30.387Z,1513252110.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:30.652Z,1513252110.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:30.776Z,1513252110.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:30.851Z,1513252110.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:31.057Z,1513252111.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:31.135Z,1513252111.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:31.159Z,1513252111.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:31.543Z,1513252111.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:31.594Z,1513252111.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:31.854Z,1513252111.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:31.957Z,1513252111.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:31.971Z,1513252111.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:32.367Z,1513252112.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:32.391Z,1513252112.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:32.649Z,1513252112.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:32.746Z,1513252112.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:32.760Z,1513252112.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:33.053Z,1513252113.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:33.153Z,1513252113.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:33.187Z,1513252113.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:33.532Z,1513252113.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:33.551Z,1513252113.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:33.850Z,1513252113.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:33.981Z,1513252113.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:34.036Z,1513252114.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:34.404Z,1513252114.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:34.443Z,1513252114.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:34.645Z,1513252114.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:34.734Z,1513252114.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:34.761Z,1513252114.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:35.049Z,1513252115.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:35.147Z,1513252115.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:35.161Z,1513252115.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:35.546Z,1513252115.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:35.560Z,1513252115.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:35.846Z,1513252115.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:35.946Z,1513252115.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:35.960Z,1513252115.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:36.337Z,1513252116.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:36.364Z,1513252116.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:36.646Z,1513252116.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:36.739Z,1513252116.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:36.755Z,1513252116.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:37.053Z,1513252117.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:37.168Z,1513252117.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:37.204Z,1513252117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:37.538Z,1513252117.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:37.559Z,1513252117.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:37.849Z,1513252117.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:37.945Z,1513252117.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:37.960Z,1513252117.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:38.344Z,1513252118.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:38.360Z,1513252118.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:38.649Z,1513252118.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:38.763Z,1513252118.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:38.793Z,1513252118.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:39.061Z,1513252119.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:39.153Z,1513252119.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:39.168Z,1513252119.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:39.528Z,1513252119.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:39.555Z,1513252119.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:39.858Z,1513252119.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:39.940Z,1513252119.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:39.980Z,1513252119.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:40.402Z,1513252120.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:40.446Z,1513252120.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:40.653Z,1513252120.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:40.733Z,1513252120.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:40.764Z,1513252120.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:41.057Z,1513252121.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:41.153Z,1513252121.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:41.169Z,1513252121.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:41.553Z,1513252121.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:41.575Z,1513252121.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:41.853Z,1513252121.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:41.954Z,1513252121.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:41.975Z,1513252121.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:42.369Z,1513252122.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:42.423Z,1513252122.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:42.649Z,1513252122.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:42.746Z,1513252122.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:42.760Z,1513252122.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:43.053Z,1513252123.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:43.131Z,1513252123.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:43.167Z,1513252123.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:43.574Z,1513252123.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:43.613Z,1513252123.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:43.850Z,1513252123.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:44.645Z,1513252124.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:45.050Z,1513252125.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:45.846Z,1513252125.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:46.643Z,1513252126.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.022Z,1513252127.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.053Z,1513252127.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.058Z,1513252127.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:47.170Z,1513252127.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.184Z,1513252127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:47.530Z,1513252127.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.553Z,1513252127.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:47.849Z,1513252127.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.930Z,1513252127.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:47.963Z,1513252127.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:48.328Z,1513252128.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:48.407Z,1513252128.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:48.645Z,1513252128.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:48.711Z,1513252128.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:48.730Z,1513252128.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:49.049Z,1513252129.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:49.117Z,1513252129.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:49.131Z,1513252129.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:49.520Z,1513252129.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:49.535Z,1513252129.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:49.848Z,1513252129.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:49.941Z,1513252129.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:49.984Z,1513252129.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:50.326Z,1513252130.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:50.341Z,1513252130.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:50.642Z,1513252130.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:50.730Z,1513252130.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:50.790Z,1513252130.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:51.049Z,1513252131.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:51.130Z,1513252131.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:51.146Z,1513252131.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:51.508Z,1513252131.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:51.543Z,1513252131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:51.846Z,1513252131.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:51.912Z,1513252131.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:51.987Z,1513252131.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:52.307Z,1513252132.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:52.347Z,1513252132.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:52.645Z,1513252132.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:52.732Z,1513252132.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:52.748Z,1513252132.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:53.053Z,1513252133.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:53.187Z,1513252133.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:53.251Z,1513252133.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:53.533Z,1513252133.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:53.548Z,1513252133.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:53.850Z,1513252133.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:53.923Z,1513252133.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:53.999Z,1513252133.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:54.334Z,1513252134.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:54.349Z,1513252134.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:54.647Z,1513252134.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:54.708Z,1513252134.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:54.724Z,1513252134.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:55.107Z,1513252135.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:55.121Z,1513252135.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:55.309Z,1513252135.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:55.512Z,1513252135.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:55.527Z,1513252135.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:55.919Z,1513252135.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:55.955Z,1513252135.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:56.105Z,1513252136.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:56.355Z,1513252136.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:56.392Z,1513252136.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:56.731Z,1513252136.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:56.748Z,1513252136.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:56.778Z,1513252136.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:57.130Z,1513252137.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:57.146Z,1513252137.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:57.514Z,1513252137.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:57.535Z,1513252137.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:57.574Z,1513252137.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:57.919Z,1513252137.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:57.939Z,1513252137.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:58.356Z,1513252138.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:58.370Z,1513252138.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:58.398Z,1513252138.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:58.710Z,1513252138.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:58.738Z,1513252138.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:58.773Z,1513252138.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:59.130Z,1513252139.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:59.152Z,1513252139.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:59.528Z,1513252139.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:59.570Z,1513252139.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:59.594Z,1513252139.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:48:59.918Z,1513252139.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:48:59.932Z,1513252139.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:00.348Z,1513252140.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:00.366Z,1513252140.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:00.383Z,1513252140.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:00.711Z,1513252140.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:00.738Z,1513252140.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:00.769Z,1513252140.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:01.107Z,1513252141.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:01.141Z,1513252141.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:01.511Z,1513252141.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:01.537Z,1513252141.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:01.566Z,1513252141.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:01.911Z,1513252141.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:01.942Z,1513252141.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:02.338Z,1513252142.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:02.365Z,1513252142.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:02.431Z,1513252142.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:02.724Z,1513252142.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:02.798Z,1513252142.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:02.809Z,1513252142.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:03.130Z,1513252143.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:03.162Z,1513252143.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:03.512Z,1513252143.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:03.532Z,1513252143.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:03.593Z,1513252143.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:03.910Z,1513252143.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:03.939Z,1513252143.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:04.315Z,1513252144.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:04.330Z,1513252144.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:04.389Z,1513252144.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:04.714Z,1513252144.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:04.775Z,1513252144.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:05.070Z,1513252145.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:05.136Z,1513252145.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:05.152Z,1513252145.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:05.530Z,1513252145.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:05.550Z,1513252145.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:05.865Z,1513252145.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:05.948Z,1513252145.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:05.963Z,1513252145.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:06.307Z,1513252146.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:06.347Z,1513252146.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:06.664Z,1513252146.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:06.722Z,1513252146.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:06.748Z,1513252146.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:07.069Z,1513252147.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:07.115Z,1513252147.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:07.153Z,1513252147.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:07.508Z,1513252147.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:07.523Z,1513252147.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:07.866Z,1513252147.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:07.911Z,1513252147.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:07.926Z,1513252147.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:08.363Z,1513252148.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:08.384Z,1513252148.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:08.661Z,1513252148.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:08.742Z,1513252148.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:08.763Z,1513252148.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:09.065Z,1513252149.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:09.138Z,1513252149.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:09.171Z,1513252149.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:09.517Z,1513252149.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:09.531Z,1513252149.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:09.861Z,1513252149.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:09.917Z,1513252149.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:09.932Z,1513252149.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:10.367Z,1513252150.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:10.406Z,1513252150.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:10.657Z,1513252150.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:10.724Z,1513252150.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:10.740Z,1513252150.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:11.061Z,1513252151.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:11.118Z,1513252151.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:11.134Z,1513252151.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:11.521Z,1513252151.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:11.543Z,1513252151.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:11.858Z,1513252151.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:11.933Z,1513252151.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:11.963Z,1513252151.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:12.407Z,1513252152.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:12.430Z,1513252152.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:12.653Z,1513252152.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:12.716Z,1513252152.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:12.740Z,1513252152.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:13.057Z,1513252153.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:13.107Z,1513252153.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:13.159Z,1513252153.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:13.519Z,1513252153.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:13.534Z,1513252153.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:13.854Z,1513252153.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:13.906Z,1513252153.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:13.936Z,1513252153.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:14.359Z,1513252154.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:14.422Z,1513252154.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:14.649Z,1513252154.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:14.726Z,1513252154.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:14.753Z,1513252154.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:15.053Z,1513252155.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:15.119Z,1513252155.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:15.135Z,1513252155.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:15.515Z,1513252155.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:15.595Z,1513252155.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:15.624Z,1513252155.624 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:49:15.850Z,1513252155.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:15.907Z,1513252155.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:15.938Z,1513252155.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:16.307Z,1513252156.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:16.415Z,1513252156.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:16.645Z,1513252156.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:16.719Z,1513252156.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:16.734Z,1513252156.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:17.050Z,1513252157.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:17.129Z,1513252157.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:17.159Z,1513252157.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:17.526Z,1513252157.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:17.558Z,1513252157.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:17.846Z,1513252157.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:17.924Z,1513252157.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:17.940Z,1513252157.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:18.304Z,1513252158.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:18.323Z,1513252158.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:18.644Z,1513252158.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:18.726Z,1513252158.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:18.773Z,1513252158.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:19.065Z,1513252159.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:19.106Z,1513252159.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:19.143Z,1513252159.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:19.508Z,1513252159.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:19.539Z,1513252159.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:19.862Z,1513252159.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:19.907Z,1513252159.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:19.922Z,1513252159.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:20.322Z,1513252160.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:20.349Z,1513252160.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:20.659Z,1513252160.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:20.741Z,1513252160.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:20.756Z,1513252160.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:21.065Z,1513252161.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:21.122Z,1513252161.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:21.150Z,1513252161.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:21.507Z,1513252161.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:21.521Z,1513252161.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:21.862Z,1513252161.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:21.932Z,1513252161.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:21.972Z,1513252161.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:22.360Z,1513252162.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:22.385Z,1513252162.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:22.657Z,1513252162.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:22.724Z,1513252162.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:22.763Z,1513252162.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:23.061Z,1513252163.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:23.118Z,1513252163.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:23.132Z,1513252163.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:23.529Z,1513252163.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:23.563Z,1513252163.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:23.858Z,1513252163.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:23.933Z,1513252163.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:23.959Z,1513252163.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:24.361Z,1513252164.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:24.380Z,1513252164.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:24.653Z,1513252164.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:24.725Z,1513252164.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:24.782Z,1513252164.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:25.057Z,1513252165.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:25.160Z,1513252165.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:25.179Z,1513252165.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:25.515Z,1513252165.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:25.529Z,1513252165.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:25.857Z,1513252165.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:25.916Z,1513252165.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:25.930Z,1513252165.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:26.375Z,1513252166.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:26.421Z,1513252166.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:26.655Z,1513252166.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:26.730Z,1513252166.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:26.754Z,1513252166.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:27.061Z,1513252167.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:27.131Z,1513252167.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:27.151Z,1513252167.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:27.520Z,1513252167.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:27.535Z,1513252167.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:27.857Z,1513252167.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:27.904Z,1513252167.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:27.931Z,1513252167.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:28.411Z,1513252168.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:28.451Z,1513252168.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:28.653Z,1513252168.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:28.723Z,1513252168.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:28.751Z,1513252168.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:29.057Z,1513252169.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:29.138Z,1513252169.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:29.154Z,1513252169.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:29.521Z,1513252169.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:29.547Z,1513252169.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:29.854Z,1513252169.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:29.922Z,1513252169.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:29.951Z,1513252169.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:30.307Z,1513252170.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:30.403Z,1513252170.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:30.649Z,1513252170.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:30.716Z,1513252170.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:30.739Z,1513252170.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:31.053Z,1513252171.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:31.120Z,1513252171.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:31.135Z,1513252171.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:31.519Z,1513252171.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:31.539Z,1513252171.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:31.850Z,1513252171.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:31.907Z,1513252171.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:31.942Z,1513252171.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:32.323Z,1513252172.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:32.338Z,1513252172.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:32.647Z,1513252172.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:32.727Z,1513252172.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:32.765Z,1513252172.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:33.073Z,1513252173.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:33.132Z,1513252173.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:33.155Z,1513252173.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:33.511Z,1513252173.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:33.539Z,1513252173.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:33.869Z,1513252173.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:33.918Z,1513252173.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:33.939Z,1513252173.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:34.318Z,1513252174.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:34.332Z,1513252174.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:34.666Z,1513252174.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:34.746Z,1513252174.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:34.782Z,1513252174.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:35.069Z,1513252175.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:35.130Z,1513252175.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:35.195Z,1513252175.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:35.534Z,1513252175.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:35.549Z,1513252175.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:35.866Z,1513252175.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:35.929Z,1513252175.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:35.944Z,1513252175.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:36.354Z,1513252176.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:36.394Z,1513252176.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:36.661Z,1513252176.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:36.721Z,1513252176.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:36.775Z,1513252176.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:37.065Z,1513252177.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:37.121Z,1513252177.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:37.155Z,1513252177.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:37.516Z,1513252177.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:37.531Z,1513252177.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:37.862Z,1513252177.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:37.953Z,1513252177.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:38.018Z,1513252178.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:38.360Z,1513252178.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:38.380Z,1513252178.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:38.657Z,1513252178.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:38.730Z,1513252178.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:38.775Z,1513252178.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:39.061Z,1513252179.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:39.130Z,1513252179.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:39.161Z,1513252179.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:39.508Z,1513252179.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:39.527Z,1513252179.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:39.858Z,1513252179.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:39.925Z,1513252179.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:39.942Z,1513252179.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:40.350Z,1513252180.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:40.376Z,1513252180.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:40.653Z,1513252180.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:40.707Z,1513252180.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:40.734Z,1513252180.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:41.059Z,1513252181.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:41.131Z,1513252181.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:41.166Z,1513252181.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:41.530Z,1513252181.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:41.551Z,1513252181.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:41.854Z,1513252181.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:41.925Z,1513252181.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:41.949Z,1513252181.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:42.359Z,1513252182.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:42.387Z,1513252182.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:42.650Z,1513252182.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:42.716Z,1513252182.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:42.743Z,1513252182.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:43.053Z,1513252183.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:43.119Z,1513252183.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:43.134Z,1513252183.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:43.518Z,1513252183.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:43.533Z,1513252183.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:43.850Z,1513252183.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:43.919Z,1513252183.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:43.934Z,1513252183.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:44.645Z,1513252184.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:45.049Z,1513252185.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:45.850Z,1513252185.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:46.646Z,1513252186.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.057Z,1513252187.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.411Z,1513252187.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.470Z,1513252187.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:47.580Z,1513252187.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.621Z,1513252187.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:47.853Z,1513252187.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.933Z,1513252187.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:47.971Z,1513252187.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:48.328Z,1513252188.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:48.359Z,1513252188.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:48.651Z,1513252188.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:48.719Z,1513252188.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:48.739Z,1513252188.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:49.057Z,1513252189.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:49.130Z,1513252189.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:49.144Z,1513252189.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:49.529Z,1513252189.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:49.544Z,1513252189.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:49.855Z,1513252189.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:49.924Z,1513252189.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:49.952Z,1513252189.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:50.366Z,1513252190.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:50.385Z,1513252190.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:50.650Z,1513252190.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:50.735Z,1513252190.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:50.750Z,1513252190.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:51.053Z,1513252191.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:51.137Z,1513252191.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:51.153Z,1513252191.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:51.530Z,1513252191.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:51.544Z,1513252191.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:51.849Z,1513252191.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:51.933Z,1513252191.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:51.948Z,1513252191.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:52.350Z,1513252192.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:52.387Z,1513252192.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:52.645Z,1513252192.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:52.722Z,1513252192.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:52.755Z,1513252192.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:53.049Z,1513252193.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:53.138Z,1513252193.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:53.153Z,1513252193.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:53.541Z,1513252193.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:53.556Z,1513252193.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:53.847Z,1513252193.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:53.950Z,1513252193.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:53.994Z,1513252193.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:54.350Z,1513252194.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:54.388Z,1513252194.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:54.641Z,1513252194.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:54.723Z,1513252194.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:54.747Z,1513252194.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:55.045Z,1513252195.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:55.126Z,1513252195.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:55.144Z,1513252195.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:55.527Z,1513252195.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:55.543Z,1513252195.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:55.925Z,1513252195.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:55.949Z,1513252195.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:56.356Z,1513252196.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:56.384Z,1513252196.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:56.742Z,1513252196.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:56.763Z,1513252196.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:57.150Z,1513252197.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:57.192Z,1513252197.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:57.527Z,1513252197.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:57.542Z,1513252197.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:57.927Z,1513252197.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:57.942Z,1513252197.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:58.372Z,1513252198.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:58.444Z,1513252198.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:58.720Z,1513252198.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:58.750Z,1513252198.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:59.133Z,1513252199.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:59.195Z,1513252199.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:59.537Z,1513252199.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:59.567Z,1513252199.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:49:59.937Z,1513252199.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:49:59.991Z,1513252199.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:00.327Z,1513252200.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:00.377Z,1513252200.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:00.727Z,1513252200.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:00.782Z,1513252200.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:01.127Z,1513252201.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:01.141Z,1513252201.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:01.534Z,1513252201.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:01.549Z,1513252201.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:01.925Z,1513252201.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:01.948Z,1513252201.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:02.336Z,1513252202.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:02.359Z,1513252202.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:02.736Z,1513252202.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:02.751Z,1513252202.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:03.138Z,1513252203.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:03.153Z,1513252203.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:03.571Z,1513252203.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:03.603Z,1513252203.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:03.936Z,1513252203.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:03.951Z,1513252203.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:04.354Z,1513252204.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:04.390Z,1513252204.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:04.722Z,1513252204.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:04.748Z,1513252204.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:05.138Z,1513252205.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:05.154Z,1513252205.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:05.540Z,1513252205.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:05.559Z,1513252205.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:05.941Z,1513252205.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:05.963Z,1513252205.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:06.345Z,1513252206.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:06.389Z,1513252206.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:06.763Z,1513252206.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:06.799Z,1513252206.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:07.118Z,1513252207.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:07.151Z,1513252207.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:07.533Z,1513252207.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:07.549Z,1513252207.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:07.929Z,1513252207.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:07.952Z,1513252207.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:08.347Z,1513252208.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:08.385Z,1513252208.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:08.746Z,1513252208.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:08.761Z,1513252208.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:09.134Z,1513252209.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:09.183Z,1513252209.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:09.518Z,1513252209.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:09.544Z,1513252209.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:09.993Z,1513252209.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:10.016Z,1513252210.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:10.346Z,1513252210.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:10.378Z,1513252210.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:10.731Z,1513252210.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:10.754Z,1513252210.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:11.148Z,1513252211.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:11.163Z,1513252211.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:11.538Z,1513252211.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:11.571Z,1513252211.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:11.938Z,1513252211.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:11.967Z,1513252211.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:12.389Z,1513252212.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:12.433Z,1513252212.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:12.723Z,1513252212.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:12.747Z,1513252212.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:13.129Z,1513252213.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:13.143Z,1513252213.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:13.521Z,1513252213.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:13.549Z,1513252213.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:13.920Z,1513252213.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:13.952Z,1513252213.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:14.338Z,1513252214.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:14.360Z,1513252214.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:14.743Z,1513252214.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:14.806Z,1513252214.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:15.147Z,1513252215.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:15.161Z,1513252215.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:15.519Z,1513252215.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:15.557Z,1513252215.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:15.924Z,1513252215.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:15.958Z,1513252215.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:16.378Z,1513252216.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:16.418Z,1513252216.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:16.738Z,1513252216.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:16.754Z,1513252216.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:17.139Z,1513252217.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:17.155Z,1513252217.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:17.538Z,1513252217.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:17.555Z,1513252217.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:17.938Z,1513252217.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:17.954Z,1513252217.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:18.348Z,1513252218.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:18.390Z,1513252218.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:18.722Z,1513252218.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:18.749Z,1513252218.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:19.131Z,1513252219.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:19.147Z,1513252219.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:19.551Z,1513252219.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:19.590Z,1513252219.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:19.935Z,1513252219.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:19.951Z,1513252219.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:20.362Z,1513252220.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:20.384Z,1513252220.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:20.742Z,1513252220.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:20.764Z,1513252220.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:21.140Z,1513252221.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:21.214Z,1513252221.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:21.523Z,1513252221.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:21.548Z,1513252221.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:21.928Z,1513252221.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:21.983Z,1513252221.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:22.360Z,1513252222.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:22.379Z,1513252222.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:22.734Z,1513252222.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:22.783Z,1513252222.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:23.133Z,1513252223.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:23.149Z,1513252223.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:23.538Z,1513252223.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:23.553Z,1513252223.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:23.938Z,1513252223.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:23.959Z,1513252223.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:24.355Z,1513252224.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:24.384Z,1513252224.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:24.723Z,1513252224.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:24.746Z,1513252224.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:25.131Z,1513252225.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:25.152Z,1513252225.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:25.522Z,1513252225.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:25.538Z,1513252225.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:25.934Z,1513252225.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:25.977Z,1513252225.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:26.382Z,1513252226.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:26.432Z,1513252226.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:26.738Z,1513252226.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:26.753Z,1513252226.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:27.137Z,1513252227.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:27.155Z,1513252227.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:27.530Z,1513252227.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:27.545Z,1513252227.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:27.923Z,1513252227.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:27.956Z,1513252227.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:28.326Z,1513252228.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:28.346Z,1513252228.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:28.739Z,1513252228.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:28.754Z,1513252228.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:29.187Z,1513252229.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:29.207Z,1513252229.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:29.542Z,1513252229.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:29.563Z,1513252229.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:29.941Z,1513252229.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:29.956Z,1513252229.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:30.316Z,1513252230.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:30.351Z,1513252230.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:30.719Z,1513252230.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:30.743Z,1513252230.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:31.118Z,1513252231.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:31.168Z,1513252231.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:31.523Z,1513252231.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:31.551Z,1513252231.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:31.919Z,1513252231.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:31.946Z,1513252231.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:32.371Z,1513252232.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:32.447Z,1513252232.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:32.742Z,1513252232.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:32.763Z,1513252232.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:33.136Z,1513252233.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:33.152Z,1513252233.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:33.518Z,1513252233.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:33.551Z,1513252233.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:33.914Z,1513252233.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:33.958Z,1513252233.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:34.355Z,1513252234.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:34.390Z,1513252234.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:34.719Z,1513252234.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:34.751Z,1513252234.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:35.142Z,1513252235.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:35.159Z,1513252235.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:35.541Z,1513252235.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:35.603Z,1513252235.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:35.929Z,1513252235.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:35.954Z,1513252235.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:36.359Z,1513252236.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:36.380Z,1513252236.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:36.722Z,1513252236.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:36.761Z,1513252236.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:37.119Z,1513252237.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:37.156Z,1513252237.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:37.523Z,1513252237.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:37.554Z,1513252237.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:37.923Z,1513252237.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:37.963Z,1513252237.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:38.369Z,1513252238.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:38.384Z,1513252238.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:38.756Z,1513252238.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:38.807Z,1513252238.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:39.138Z,1513252239.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:39.164Z,1513252239.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:39.524Z,1513252239.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:39.565Z,1513252239.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:39.930Z,1513252239.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:39.970Z,1513252239.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:40.396Z,1513252240.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:40.424Z,1513252240.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:40.719Z,1513252240.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:40.756Z,1513252240.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:41.129Z,1513252241.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:41.156Z,1513252241.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:41.541Z,1513252241.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:41.558Z,1513252241.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:41.959Z,1513252241.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:41.976Z,1513252241.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:42.335Z,1513252242.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:42.362Z,1513252242.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:42.748Z,1513252242.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:42.764Z,1513252242.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:43.126Z,1513252243.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:43.203Z,1513252243.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:43.518Z,1513252243.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:43.533Z,1513252243.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:43.926Z,1513252243.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:43.941Z,1513252243.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:47.445Z,1513252247.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:47.509Z,1513252247.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:47.622Z,1513252247.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:47.662Z,1513252247.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:47.974Z,1513252247.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:48.019Z,1513252248.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:48.392Z,1513252248.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:48.447Z,1513252248.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:48.763Z,1513252248.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:48.778Z,1513252248.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:49.164Z,1513252249.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:49.179Z,1513252249.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:49.567Z,1513252249.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:49.581Z,1513252249.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:49.966Z,1513252249.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:49.980Z,1513252249.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:50.370Z,1513252250.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:50.394Z,1513252250.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:50.778Z,1513252250.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:50.794Z,1513252250.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:51.178Z,1513252251.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:51.193Z,1513252251.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:51.596Z,1513252251.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:51.628Z,1513252251.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:51.955Z,1513252251.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:51.987Z,1513252251.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:52.372Z,1513252252.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:52.390Z,1513252252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:52.755Z,1513252252.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:52.793Z,1513252252.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:53.178Z,1513252253.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:53.194Z,1513252253.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:53.580Z,1513252253.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:53.603Z,1513252253.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:53.975Z,1513252253.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:53.992Z,1513252253.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:54.408Z,1513252254.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:54.430Z,1513252254.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:54.794Z,1513252254.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:54.838Z,1513252254.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:55.156Z,1513252255.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:55.188Z,1513252255.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:55.557Z,1513252255.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:55.571Z,1513252255.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:55.991Z,1513252255.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:56.015Z,1513252256.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:56.370Z,1513252256.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:56.438Z,1513252256.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:56.794Z,1513252256.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:56.808Z,1513252256.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:57.187Z,1513252257.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:57.202Z,1513252257.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:57.566Z,1513252257.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:57.591Z,1513252257.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:58.018Z,1513252258.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:58.056Z,1513252258.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:58.363Z,1513252258.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:58.402Z,1513252258.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:58.763Z,1513252258.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:58.803Z,1513252258.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:59.176Z,1513252259.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:59.207Z,1513252259.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:59.578Z,1513252259.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:50:59.608Z,1513252259.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:50:59.973Z,1513252259.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:00.006Z,1513252260.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:00.359Z,1513252260.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:00.376Z,1513252260.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:00.760Z,1513252260.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:00.788Z,1513252260.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:01.198Z,1513252261.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:01.221Z,1513252261.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:01.565Z,1513252261.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:01.587Z,1513252261.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:01.956Z,1513252261.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:01.991Z,1513252261.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:02.373Z,1513252262.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:02.388Z,1513252262.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:02.774Z,1513252262.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:02.788Z,1513252262.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:03.174Z,1513252263.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:03.189Z,1513252263.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:03.567Z,1513252263.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:03.582Z,1513252263.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:03.967Z,1513252263.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:03.983Z,1513252263.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:04.394Z,1513252264.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:04.430Z,1513252264.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:04.762Z,1513252264.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:04.782Z,1513252264.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:05.174Z,1513252265.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:05.189Z,1513252265.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:05.578Z,1513252265.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:05.599Z,1513252265.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:05.978Z,1513252265.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:05.994Z,1513252265.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:06.376Z,1513252266.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:06.391Z,1513252266.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:06.768Z,1513252266.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:06.784Z,1513252266.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:07.158Z,1513252267.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:07.192Z,1513252267.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:07.584Z,1513252267.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:07.630Z,1513252267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:07.965Z,1513252267.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:07.987Z,1513252267.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:08.404Z,1513252268.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:08.510Z,1513252268.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:08.782Z,1513252268.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:08.797Z,1513252268.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:09.178Z,1513252269.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:09.234Z,1513252269.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:09.555Z,1513252269.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:09.592Z,1513252269.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:09.959Z,1513252269.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:10.029Z,1513252270.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:10.354Z,1513252270.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:10.380Z,1513252270.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:10.794Z,1513252270.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:10.835Z,1513252270.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:11.175Z,1513252271.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:11.190Z,1513252271.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:11.572Z,1513252271.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:11.599Z,1513252271.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:11.977Z,1513252271.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:11.993Z,1513252271.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:12.355Z,1513252272.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:12.391Z,1513252272.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:12.755Z,1513252272.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:12.790Z,1513252272.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:13.155Z,1513252273.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:13.191Z,1513252273.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:13.557Z,1513252273.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:13.591Z,1513252273.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:13.591Z,1513252273.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 226
2017-12-14T11:51:13.591Z,1513252273.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:51:13.593Z,1513252273.593 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:13.593Z,1513252273.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 226
2017-12-14T11:51:13.593Z,1513252273.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:51:13.595Z,1513252273.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:13.595Z,1513252273.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 226
2017-12-14T11:51:13.595Z,1513252273.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:51:13.607Z,1513252273.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:51:13.607Z,1513252273.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:51:13.608Z,1513252273.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:51:13.986Z,1513252273.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:14.058Z,1513252274.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:51:14.058Z,1513252274.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 226
2017-12-14T11:51:14.058Z,1513252274.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:51:14.058Z,1513252274.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 226
2017-12-14T11:51:14.059Z,1513252274.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:51:14.059Z,1513252274.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 226
2017-12-14T11:51:14.367Z,1513252274.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:14.387Z,1513252274.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:51:14.387Z,1513252274.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:51:14.387Z,1513252274.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:51:14.388Z,1513252274.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:51:14.388Z,1513252274.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:51:14.405Z,1513252274.405 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:51:14.405Z,1513252274.405 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:51:14.406Z,1513252274.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:51:14.406Z,1513252274.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:51:14.769Z,1513252274.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:14.784Z,1513252274.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:15.170Z,1513252275.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:15.185Z,1513252275.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:15.567Z,1513252275.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:15.585Z,1513252275.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:15.965Z,1513252275.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:15.979Z,1513252275.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:16.366Z,1513252276.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:16.383Z,1513252276.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:16.765Z,1513252276.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:16.793Z,1513252276.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:17.204Z,1513252277.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:17.276Z,1513252277.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:17.571Z,1513252277.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:17.611Z,1513252277.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:17.979Z,1513252277.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:18.015Z,1513252278.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:18.361Z,1513252278.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:18.415Z,1513252278.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:18.779Z,1513252278.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:18.826Z,1513252278.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:19.166Z,1513252279.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:19.199Z,1513252279.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:19.567Z,1513252279.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:19.619Z,1513252279.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:19.957Z,1513252279.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:19.996Z,1513252279.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:20.368Z,1513252280.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:20.411Z,1513252280.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:20.771Z,1513252280.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:20.807Z,1513252280.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:21.176Z,1513252281.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:21.214Z,1513252281.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:21.595Z,1513252281.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:21.619Z,1513252281.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:21.960Z,1513252281.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:22.022Z,1513252282.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:22.406Z,1513252282.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:22.461Z,1513252282.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:22.766Z,1513252282.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:22.814Z,1513252282.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:23.188Z,1513252283.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:23.242Z,1513252283.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:23.571Z,1513252283.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:23.590Z,1513252283.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:23.968Z,1513252283.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:24.039Z,1513252284.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:24.387Z,1513252284.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:24.410Z,1513252284.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:24.765Z,1513252284.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:24.780Z,1513252284.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:25.165Z,1513252285.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:25.191Z,1513252285.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:25.557Z,1513252285.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:25.615Z,1513252285.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:25.955Z,1513252285.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:25.981Z,1513252285.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:26.398Z,1513252286.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:26.428Z,1513252286.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:26.818Z,1513252286.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:26.846Z,1513252286.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:27.183Z,1513252287.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:27.203Z,1513252287.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:27.589Z,1513252287.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:27.604Z,1513252287.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:27.955Z,1513252287.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:27.000Z,1513252288.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:28.383Z,1513252288.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:28.450Z,1513252288.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:28.785Z,1513252288.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:28.824Z,1513252288.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:29.167Z,1513252289.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:29.210Z,1513252289.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:29.573Z,1513252289.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:29.603Z,1513252289.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:29.968Z,1513252289.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:30.003Z,1513252290.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:30.381Z,1513252290.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:30.474Z,1513252290.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:30.764Z,1513252290.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:30.914Z,1513252290.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:31.183Z,1513252291.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:31.239Z,1513252291.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:31.570Z,1513252291.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:31.621Z,1513252291.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:31.978Z,1513252291.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:32.049Z,1513252292.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:32.384Z,1513252292.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:32.463Z,1513252292.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:32.780Z,1513252292.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:32.851Z,1513252292.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:33.169Z,1513252293.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:33.239Z,1513252293.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:33.564Z,1513252293.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:33.623Z,1513252293.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:33.960Z,1513252293.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:34.035Z,1513252294.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:34.359Z,1513252294.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:34.395Z,1513252294.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:34.757Z,1513252294.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:34.792Z,1513252294.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:35.167Z,1513252295.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:35.250Z,1513252295.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:35.580Z,1513252295.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:35.603Z,1513252295.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:35.968Z,1513252295.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:36.004Z,1513252296.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:36.385Z,1513252296.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:36.400Z,1513252296.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:36.832Z,1513252296.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:36.888Z,1513252296.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:37.157Z,1513252297.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:37.194Z,1513252297.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:37.560Z,1513252297.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:37.612Z,1513252297.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:37.966Z,1513252297.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:37.989Z,1513252297.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:38.376Z,1513252298.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:38.423Z,1513252298.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:38.780Z,1513252298.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:38.819Z,1513252298.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:39.177Z,1513252299.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:39.195Z,1513252299.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:39.557Z,1513252299.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:39.583Z,1513252299.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:39.957Z,1513252299.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:40.021Z,1513252300.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:40.358Z,1513252300.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:40.393Z,1513252300.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:40.784Z,1513252300.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:40.811Z,1513252300.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:41.168Z,1513252301.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:41.216Z,1513252301.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:41.566Z,1513252301.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:41.606Z,1513252301.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:41.972Z,1513252301.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:41.000Z,1513252302.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:42.366Z,1513252302.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:42.444Z,1513252302.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:42.768Z,1513252302.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:42.811Z,1513252302.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:43.194Z,1513252303.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:43.227Z,1513252303.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:43.578Z,1513252303.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:43.608Z,1513252303.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:43.964Z,1513252303.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:44.075Z,1513252304.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:48.052Z,1513252308.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:48.068Z,1513252308.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:48.186Z,1513252308.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:48.223Z,1513252308.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:48.542Z,1513252308.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:48.577Z,1513252308.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:48.929Z,1513252308.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:48.944Z,1513252308.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:49.328Z,1513252309.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:49.344Z,1513252309.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:49.746Z,1513252309.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:49.778Z,1513252309.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:50.134Z,1513252310.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:50.149Z,1513252310.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:50.542Z,1513252310.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:50.559Z,1513252310.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:50.933Z,1513252310.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:50.948Z,1513252310.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:51.336Z,1513252311.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:51.351Z,1513252311.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:51.726Z,1513252311.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:51.747Z,1513252311.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:52.116Z,1513252312.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:52.147Z,1513252312.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:52.515Z,1513252312.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:52.552Z,1513252312.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:52.995Z,1513252312.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:53.075Z,1513252313.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:53.326Z,1513252313.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:53.360Z,1513252313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:53.729Z,1513252313.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:53.781Z,1513252313.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:54.134Z,1513252314.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:54.160Z,1513252314.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:54.521Z,1513252314.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:54.543Z,1513252314.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:54.927Z,1513252314.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:54.967Z,1513252314.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:55.324Z,1513252315.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:55.358Z,1513252315.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:55.722Z,1513252315.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:55.771Z,1513252315.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:56.129Z,1513252316.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:56.158Z,1513252316.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:56.530Z,1513252316.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:56.579Z,1513252316.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:56.934Z,1513252316.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:56.959Z,1513252316.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:57.319Z,1513252317.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:57.334Z,1513252317.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:57.716Z,1513252317.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:57.732Z,1513252317.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:58.119Z,1513252318.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:58.139Z,1513252318.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:58.522Z,1513252318.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:58.536Z,1513252318.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:58.912Z,1513252318.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:58.936Z,1513252318.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:59.339Z,1513252319.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:59.389Z,1513252319.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:51:59.733Z,1513252319.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:51:59.748Z,1513252319.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:00.147Z,1513252320.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:00.170Z,1513252320.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:00.526Z,1513252320.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:00.547Z,1513252320.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:00.925Z,1513252320.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:00.939Z,1513252320.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:01.319Z,1513252321.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:01.341Z,1513252321.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:01.718Z,1513252321.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:01.744Z,1513252321.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:02.133Z,1513252322.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:02.148Z,1513252322.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:02.563Z,1513252322.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:02.598Z,1513252322.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:02.935Z,1513252322.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:02.955Z,1513252322.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:03.318Z,1513252323.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:03.343Z,1513252323.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:03.712Z,1513252323.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:03.746Z,1513252323.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:04.115Z,1513252324.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:04.186Z,1513252324.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:04.555Z,1513252324.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:04.589Z,1513252324.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:04.919Z,1513252324.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:04.951Z,1513252324.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:05.333Z,1513252325.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:05.349Z,1513252325.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:05.748Z,1513252325.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:05.803Z,1513252325.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:06.126Z,1513252326.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:06.147Z,1513252326.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:06.523Z,1513252326.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:06.555Z,1513252326.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:06.916Z,1513252326.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:06.931Z,1513252326.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:07.319Z,1513252327.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:07.335Z,1513252327.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:07.722Z,1513252327.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:07.759Z,1513252327.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:08.133Z,1513252328.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:08.167Z,1513252328.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:08.533Z,1513252328.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:08.560Z,1513252328.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:08.973Z,1513252328.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:08.996Z,1513252328.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:09.321Z,1513252329.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:09.335Z,1513252329.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:09.724Z,1513252329.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:09.739Z,1513252329.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:10.130Z,1513252330.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:10.171Z,1513252330.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:10.523Z,1513252330.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:10.537Z,1513252330.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:10.924Z,1513252330.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:10.974Z,1513252330.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:11.329Z,1513252331.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:11.344Z,1513252331.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:11.741Z,1513252331.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:11.779Z,1513252331.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:12.143Z,1513252332.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:12.178Z,1513252332.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:12.515Z,1513252332.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:12.557Z,1513252332.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:12.915Z,1513252332.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:12.955Z,1513252332.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:13.327Z,1513252333.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:13.358Z,1513252333.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:13.745Z,1513252333.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:13.759Z,1513252333.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:14.133Z,1513252334.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:14.163Z,1513252334.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:14.530Z,1513252334.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:14.558Z,1513252334.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:14.935Z,1513252334.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:14.967Z,1513252334.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:15.321Z,1513252335.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:15.335Z,1513252335.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:15.732Z,1513252335.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:15.768Z,1513252335.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:16.126Z,1513252336.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:16.175Z,1513252336.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:16.524Z,1513252336.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:16.564Z,1513252336.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:16.920Z,1513252336.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:16.936Z,1513252336.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:17.333Z,1513252337.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:17.370Z,1513252337.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:17.737Z,1513252337.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:17.775Z,1513252337.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:18.134Z,1513252338.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:18.148Z,1513252338.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:18.548Z,1513252338.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:18.604Z,1513252338.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:18.927Z,1513252338.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:18.965Z,1513252338.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:19.321Z,1513252339.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:19.336Z,1513252339.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:19.722Z,1513252339.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:19.736Z,1513252339.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:20.137Z,1513252340.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:20.166Z,1513252340.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:20.530Z,1513252340.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:20.557Z,1513252340.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:20.926Z,1513252340.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:20.952Z,1513252340.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:21.320Z,1513252341.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:21.334Z,1513252341.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:21.711Z,1513252341.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:21.767Z,1513252341.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:22.125Z,1513252342.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:22.140Z,1513252342.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:22.526Z,1513252342.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:22.540Z,1513252342.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:22.925Z,1513252342.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:22.947Z,1513252342.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:23.340Z,1513252343.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:23.372Z,1513252343.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:23.730Z,1513252343.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:23.744Z,1513252343.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:24.126Z,1513252344.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:24.142Z,1513252344.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:24.528Z,1513252344.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:24.551Z,1513252344.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:24.932Z,1513252344.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:24.981Z,1513252344.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:25.323Z,1513252345.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:25.362Z,1513252345.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:25.720Z,1513252345.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:25.736Z,1513252345.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:26.137Z,1513252346.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:26.165Z,1513252346.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:26.533Z,1513252346.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:26.568Z,1513252346.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:26.933Z,1513252346.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:26.974Z,1513252346.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:27.322Z,1513252347.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:27.337Z,1513252347.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:27.725Z,1513252347.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:27.739Z,1513252347.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:28.120Z,1513252348.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:28.136Z,1513252348.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:28.515Z,1513252348.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:28.549Z,1513252348.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:28.915Z,1513252348.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:28.939Z,1513252348.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:29.334Z,1513252349.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:29.348Z,1513252349.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:29.738Z,1513252349.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:29.753Z,1513252349.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:30.135Z,1513252350.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:30.151Z,1513252350.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:30.515Z,1513252350.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:30.547Z,1513252350.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:30.915Z,1513252350.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:30.948Z,1513252350.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:31.319Z,1513252351.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:31.344Z,1513252351.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:31.715Z,1513252351.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:31.746Z,1513252351.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:32.099Z,1513252352.099 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T11:52:32.099Z,1513252352.099 [NAL9602] Data Fault, FailCount= 2
2017-12-14T11:52:32.099Z,1513252352.099 [NAL9602](ERROR): Data Fault
2017-12-14T11:52:32.116Z,1513252352.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:32.166Z,1513252352.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:32.191Z,1513252352.191 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T11:52:32.498Z,1513252352.498 [NAL9602](INFO): Powering down
2017-12-14T11:52:32.516Z,1513252352.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:32.547Z,1513252352.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:32.914Z,1513252352.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:32.952Z,1513252352.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:33.320Z,1513252353.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:33.334Z,1513252353.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:33.371Z,1513252353.371 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T11:52:33.371Z,1513252353.371 [NAL9602] No Fault, FailCount= 2
2017-12-14T11:52:33.712Z,1513252353.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:33.727Z,1513252353.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:34.121Z,1513252354.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:34.136Z,1513252354.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:34.519Z,1513252354.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:34.679Z,1513252354.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:34.925Z,1513252354.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:34.940Z,1513252354.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:35.323Z,1513252355.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:35.339Z,1513252355.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:35.725Z,1513252355.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:35.740Z,1513252355.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:36.132Z,1513252356.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:36.147Z,1513252356.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:36.514Z,1513252356.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:36.540Z,1513252356.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:36.940Z,1513252356.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:36.959Z,1513252356.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:37.316Z,1513252357.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:37.348Z,1513252357.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:37.718Z,1513252357.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:37.743Z,1513252357.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:38.114Z,1513252358.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:38.159Z,1513252358.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:38.526Z,1513252358.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:38.551Z,1513252358.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:38.914Z,1513252358.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:38.988Z,1513252358.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:39.319Z,1513252359.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:39.351Z,1513252359.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:39.723Z,1513252359.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:39.738Z,1513252359.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:40.120Z,1513252360.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:40.165Z,1513252360.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:40.523Z,1513252360.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:40.537Z,1513252360.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:40.919Z,1513252360.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:40.988Z,1513252360.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:41.322Z,1513252361.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:41.337Z,1513252361.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:41.725Z,1513252361.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:41.739Z,1513252361.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:42.120Z,1513252362.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:42.135Z,1513252362.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:42.521Z,1513252362.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:42.537Z,1513252362.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:42.923Z,1513252362.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:42.979Z,1513252362.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:43.320Z,1513252363.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:43.335Z,1513252363.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:43.338Z,1513252363.338 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T11:52:43.338Z,1513252363.338 [Default:CheckIn:C.Wait] Stopped
2017-12-14T11:52:43.338Z,1513252363.338 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T11:52:43.338Z,1513252363.338 [Default:CheckIn:D] Running Loop=1
2017-12-14T11:52:43.723Z,1513252363.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:43.743Z,1513252363.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:43.746Z,1513252363.746 [Default:CheckIn:D] Stopped
2017-12-14T11:52:43.746Z,1513252363.746 [Default:CheckIn:E] Running Loop=1
2017-12-14T11:52:44.177Z,1513252364.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:44.238Z,1513252364.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.472591 min 
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn:E] Stopped
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn] Stopped
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T11:52:44.242Z,1513252364.242 [Default:CheckIn](INFO): Running loop #66
2017-12-14T11:52:44.243Z,1513252364.243 [Default:CheckIn] Running Loop=66
2017-12-14T11:52:44.243Z,1513252364.243 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T11:52:44.243Z,1513252364.243 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T11:52:47.435Z,1513252367.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:47.468Z,1513252367.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:47.583Z,1513252367.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:47.627Z,1513252367.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:47.965Z,1513252367.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:47.979Z,1513252367.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:48.365Z,1513252368.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:48.416Z,1513252368.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:48.762Z,1513252368.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:48.777Z,1513252368.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:49.166Z,1513252369.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:49.211Z,1513252369.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:49.567Z,1513252369.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:49.582Z,1513252369.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:49.964Z,1513252369.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:49.979Z,1513252369.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:50.367Z,1513252370.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:50.382Z,1513252370.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:50.763Z,1513252370.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:50.791Z,1513252370.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:51.163Z,1513252371.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:51.179Z,1513252371.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:51.562Z,1513252371.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:51.581Z,1513252371.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:51.952Z,1513252371.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:51.983Z,1513252371.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:52.367Z,1513252372.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:52.390Z,1513252372.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:52.756Z,1513252372.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:52.824Z,1513252372.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:53.156Z,1513252373.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:53.183Z,1513252373.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:53.559Z,1513252373.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:53.587Z,1513252373.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:53.956Z,1513252373.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:53.995Z,1513252373.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:54.356Z,1513252374.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:54.371Z,1513252374.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:54.764Z,1513252374.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:54.791Z,1513252374.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:55.166Z,1513252375.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:55.180Z,1513252375.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:55.553Z,1513252375.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:55.580Z,1513252375.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:55.968Z,1513252375.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:55.983Z,1513252375.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:56.365Z,1513252376.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:56.385Z,1513252376.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:56.767Z,1513252376.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:56.783Z,1513252376.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:57.173Z,1513252377.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:57.221Z,1513252377.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:57.565Z,1513252377.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:57.587Z,1513252377.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:57.970Z,1513252377.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:57.985Z,1513252377.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:58.374Z,1513252378.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:58.389Z,1513252378.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:58.768Z,1513252378.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:58.784Z,1513252378.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:59.162Z,1513252379.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:59.181Z,1513252379.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:59.564Z,1513252379.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:59.579Z,1513252379.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:52:59.972Z,1513252379.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:52:59.995Z,1513252379.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:00.427Z,1513252380.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:00.450Z,1513252380.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:00.755Z,1513252380.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:00.782Z,1513252380.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:01.155Z,1513252381.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:01.254Z,1513252381.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:01.552Z,1513252381.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:01.567Z,1513252381.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:01.960Z,1513252381.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:02.003Z,1513252382.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:02.361Z,1513252382.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:02.376Z,1513252382.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:02.755Z,1513252382.755 [NAL9602](INFO): Powering up NAL9602
2017-12-14T11:53:02.772Z,1513252382.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:02.837Z,1513252382.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:03.159Z,1513252383.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:03.174Z,1513252383.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:03.562Z,1513252383.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:03.625Z,1513252383.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:03.963Z,1513252383.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:03.978Z,1513252383.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:04.365Z,1513252384.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:04.379Z,1513252384.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:04.766Z,1513252384.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:04.781Z,1513252384.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:05.167Z,1513252385.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:05.181Z,1513252385.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:05.565Z,1513252385.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:05.579Z,1513252385.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:05.955Z,1513252385.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:05.992Z,1513252385.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:06.357Z,1513252386.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:06.392Z,1513252386.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:06.785Z,1513252386.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:06.820Z,1513252386.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:07.162Z,1513252387.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:07.192Z,1513252387.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:07.560Z,1513252387.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:07.574Z,1513252387.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:07.958Z,1513252387.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:07.974Z,1513252387.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:08.361Z,1513252388.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:08.378Z,1513252388.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:08.763Z,1513252388.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:08.799Z,1513252388.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:09.159Z,1513252389.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:09.173Z,1513252389.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:09.559Z,1513252389.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:09.573Z,1513252389.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:10.003Z,1513252390.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:10.031Z,1513252390.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:10.361Z,1513252390.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:10.381Z,1513252390.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:10.759Z,1513252390.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:10.774Z,1513252390.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:11.165Z,1513252391.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:11.212Z,1513252391.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:11.560Z,1513252391.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:11.575Z,1513252391.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:11.962Z,1513252391.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:11.977Z,1513252391.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:12.363Z,1513252392.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:12.383Z,1513252392.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:12.760Z,1513252392.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:12.783Z,1513252392.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:13.193Z,1513252393.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:13.242Z,1513252393.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:13.573Z,1513252393.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:13.587Z,1513252393.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:13.938Z,1513252393.938 [NAL9602](INFO): NAL9602 initialized
2017-12-14T11:53:13.968Z,1513252393.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:13.983Z,1513252393.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:14.409Z,1513252394.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:14.433Z,1513252394.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:14.775Z,1513252394.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:14.790Z,1513252394.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:15.174Z,1513252395.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:15.189Z,1513252395.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:15.573Z,1513252395.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:15.587Z,1513252395.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:15.962Z,1513252395.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:15.977Z,1513252395.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:16.387Z,1513252396.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:16.402Z,1513252396.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:16.763Z,1513252396.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:16.791Z,1513252396.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:17.166Z,1513252397.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:17.203Z,1513252397.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:17.585Z,1513252397.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:17.600Z,1513252397.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:17.969Z,1513252397.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:17.995Z,1513252397.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:18.358Z,1513252398.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:18.381Z,1513252398.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:18.784Z,1513252398.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:18.803Z,1513252398.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:19.163Z,1513252399.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:19.195Z,1513252399.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:19.595Z,1513252399.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:19.623Z,1513252399.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:19.962Z,1513252399.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:19.994Z,1513252399.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:20.385Z,1513252400.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:20.403Z,1513252400.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:20.773Z,1513252400.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:20.803Z,1513252400.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:21.185Z,1513252401.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:21.200Z,1513252401.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:21.560Z,1513252401.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:21.575Z,1513252401.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:21.974Z,1513252401.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:22.001Z,1513252402.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:22.373Z,1513252402.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:22.403Z,1513252402.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:22.791Z,1513252402.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:22.859Z,1513252402.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:23.170Z,1513252403.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:23.191Z,1513252403.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:23.569Z,1513252403.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:23.624Z,1513252403.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:23.967Z,1513252403.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:23.990Z,1513252403.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:24.367Z,1513252404.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:24.419Z,1513252404.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:24.760Z,1513252404.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:24.779Z,1513252404.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:25.166Z,1513252405.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:25.221Z,1513252405.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:25.571Z,1513252405.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:25.588Z,1513252405.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:25.964Z,1513252405.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:25.979Z,1513252405.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:26.378Z,1513252406.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:26.393Z,1513252406.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:26.781Z,1513252406.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:26.824Z,1513252406.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:27.174Z,1513252407.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:27.192Z,1513252407.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:27.555Z,1513252407.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:27.582Z,1513252407.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:27.955Z,1513252407.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:27.993Z,1513252407.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:28.404Z,1513252408.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:28.435Z,1513252408.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:28.756Z,1513252408.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:28.799Z,1513252408.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:29.180Z,1513252409.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:29.200Z,1513252409.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:29.582Z,1513252409.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:29.596Z,1513252409.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:29.987Z,1513252409.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:30.032Z,1513252410.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:30.355Z,1513252410.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:30.380Z,1513252410.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:30.773Z,1513252410.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:30.788Z,1513252410.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:31.156Z,1513252411.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:31.191Z,1513252411.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:31.560Z,1513252411.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:31.595Z,1513252411.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:31.954Z,1513252411.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:31.988Z,1513252411.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:32.370Z,1513252412.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:32.399Z,1513252412.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:32.779Z,1513252412.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:32.793Z,1513252412.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:33.208Z,1513252413.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:33.260Z,1513252413.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:33.555Z,1513252413.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:33.590Z,1513252413.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:33.955Z,1513252413.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:33.986Z,1513252413.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:34.357Z,1513252414.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:34.394Z,1513252414.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:34.757Z,1513252414.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:34.792Z,1513252414.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:35.179Z,1513252415.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:35.194Z,1513252415.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:35.579Z,1513252415.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:35.594Z,1513252415.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:35.962Z,1513252415.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:35.999Z,1513252415.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:36.419Z,1513252416.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:36.461Z,1513252416.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:36.761Z,1513252416.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:36.776Z,1513252416.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:37.163Z,1513252417.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:37.178Z,1513252417.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:37.563Z,1513252417.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:37.583Z,1513252417.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:37.961Z,1513252417.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:37.987Z,1513252417.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:38.382Z,1513252418.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:38.420Z,1513252418.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:38.772Z,1513252418.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:38.792Z,1513252418.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:39.172Z,1513252419.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:39.195Z,1513252419.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:39.594Z,1513252419.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:39.626Z,1513252419.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:39.970Z,1513252419.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:39.985Z,1513252419.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:40.371Z,1513252420.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:40.390Z,1513252420.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:40.768Z,1513252420.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:40.783Z,1513252420.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:41.178Z,1513252421.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:41.192Z,1513252421.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:41.577Z,1513252421.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:41.591Z,1513252421.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:41.978Z,1513252421.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:41.992Z,1513252421.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:42.395Z,1513252422.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:42.439Z,1513252422.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:42.800Z,1513252422.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:42.841Z,1513252422.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:43.155Z,1513252423.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:43.191Z,1513252423.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:43.560Z,1513252423.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:43.585Z,1513252423.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:43.956Z,1513252423.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:43.995Z,1513252423.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:44.371Z,1513252424.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:44.396Z,1513252424.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:47.782Z,1513252427.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:47.867Z,1513252427.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:47.963Z,1513252427.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:47.986Z,1513252427.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:48.362Z,1513252428.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:48.377Z,1513252428.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:48.750Z,1513252428.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:48.803Z,1513252428.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:49.181Z,1513252429.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:49.214Z,1513252429.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:49.531Z,1513252429.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:49.579Z,1513252429.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:49.965Z,1513252429.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:49.980Z,1513252429.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:50.362Z,1513252430.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:50.380Z,1513252430.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:50.750Z,1513252430.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:50.781Z,1513252430.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:51.154Z,1513252431.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:51.175Z,1513252431.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:51.530Z,1513252431.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:51.569Z,1513252431.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:51.935Z,1513252431.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:51.969Z,1513252431.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:52.378Z,1513252432.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:52.422Z,1513252432.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:52.758Z,1513252432.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:52.772Z,1513252432.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:53.158Z,1513252433.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:53.173Z,1513252433.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:53.547Z,1513252433.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:53.577Z,1513252433.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:53.956Z,1513252433.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:53.971Z,1513252433.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:54.347Z,1513252434.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:54.378Z,1513252434.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:54.746Z,1513252434.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:54.769Z,1513252434.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:55.142Z,1513252435.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:55.158Z,1513252435.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:55.557Z,1513252435.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:55.588Z,1513252435.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:55.942Z,1513252435.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:55.957Z,1513252435.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:56.403Z,1513252436.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:56.425Z,1513252436.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:56.760Z,1513252436.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:56.776Z,1513252436.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:57.151Z,1513252437.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:57.166Z,1513252437.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:57.530Z,1513252437.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:57.557Z,1513252437.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:57.932Z,1513252437.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:57.972Z,1513252437.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:58.337Z,1513252438.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:58.371Z,1513252438.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:58.738Z,1513252438.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:58.795Z,1513252438.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:59.150Z,1513252439.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:59.175Z,1513252439.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:59.561Z,1513252439.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:59.580Z,1513252439.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:53:59.949Z,1513252439.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:53:59.971Z,1513252439.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:00.339Z,1513252440.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:00.374Z,1513252440.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:00.732Z,1513252440.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:00.751Z,1513252440.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:01.139Z,1513252441.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:01.178Z,1513252441.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:01.540Z,1513252441.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:01.556Z,1513252441.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:01.952Z,1513252441.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:01.989Z,1513252441.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:02.369Z,1513252442.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:02.391Z,1513252442.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:02.755Z,1513252442.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:02.778Z,1513252442.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:03.147Z,1513252443.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:03.196Z,1513252443.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:03.541Z,1513252443.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:03.557Z,1513252443.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:03.941Z,1513252443.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:03.957Z,1513252443.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:04.361Z,1513252444.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:04.390Z,1513252444.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:04.740Z,1513252444.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:04.762Z,1513252444.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:05.191Z,1513252445.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:05.218Z,1513252445.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:05.547Z,1513252445.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:05.564Z,1513252445.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:05.950Z,1513252445.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:05.964Z,1513252445.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:06.354Z,1513252446.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:06.398Z,1513252446.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:06.741Z,1513252446.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:06.757Z,1513252446.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:07.135Z,1513252447.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:07.171Z,1513252447.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:07.548Z,1513252447.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:07.564Z,1513252447.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:07.931Z,1513252447.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:07.960Z,1513252447.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:08.401Z,1513252448.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:08.460Z,1513252448.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:08.754Z,1513252448.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:08.773Z,1513252448.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:09.156Z,1513252449.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:09.175Z,1513252449.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:09.531Z,1513252449.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:09.559Z,1513252449.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:09.931Z,1513252449.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:09.987Z,1513252449.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:10.401Z,1513252450.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:10.471Z,1513252450.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:10.734Z,1513252450.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:10.767Z,1513252450.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:11.141Z,1513252451.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:11.206Z,1513252451.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:11.582Z,1513252451.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:11.617Z,1513252451.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:11.942Z,1513252451.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:11.995Z,1513252451.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:12.340Z,1513252452.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:12.412Z,1513252452.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:12.730Z,1513252452.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:12.768Z,1513252452.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:13.134Z,1513252453.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:13.151Z,1513252453.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:13.533Z,1513252453.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:13.547Z,1513252453.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:13.935Z,1513252453.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:13.951Z,1513252453.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:14.347Z,1513252454.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:14.378Z,1513252454.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:14.778Z,1513252454.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:14.801Z,1513252454.801 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:14.801Z,1513252454.801 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 227
2017-12-14T11:54:14.801Z,1513252454.801 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:54:14.803Z,1513252454.803 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:14.803Z,1513252454.803 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 227
2017-12-14T11:54:14.803Z,1513252454.803 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:54:14.821Z,1513252454.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:14.821Z,1513252454.821 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 227
2017-12-14T11:54:14.821Z,1513252454.821 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:54:14.858Z,1513252454.858 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:54:14.858Z,1513252454.858 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:54:14.858Z,1513252454.858 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:54:15.142Z,1513252455.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:15.192Z,1513252455.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:54:15.192Z,1513252455.192 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 227
2017-12-14T11:54:15.193Z,1513252455.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:54:15.193Z,1513252455.193 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 227
2017-12-14T11:54:15.194Z,1513252455.194 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:54:15.194Z,1513252455.194 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 227
2017-12-14T11:54:15.538Z,1513252455.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:15.552Z,1513252455.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:54:15.552Z,1513252455.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:54:15.552Z,1513252455.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:54:15.553Z,1513252455.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:54:15.553Z,1513252455.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:54:15.554Z,1513252455.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:54:15.554Z,1513252455.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:54:15.554Z,1513252455.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:54:15.555Z,1513252455.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:54:15.941Z,1513252455.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:15.956Z,1513252455.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:16.364Z,1513252456.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:16.390Z,1513252456.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:16.738Z,1513252456.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:16.754Z,1513252456.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:17.144Z,1513252457.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:17.159Z,1513252457.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:17.550Z,1513252457.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:17.564Z,1513252457.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:17.963Z,1513252457.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:18.063Z,1513252458.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:18.360Z,1513252458.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:18.394Z,1513252458.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:18.739Z,1513252458.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:18.760Z,1513252458.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:19.142Z,1513252459.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:19.163Z,1513252459.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:19.543Z,1513252459.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:19.558Z,1513252459.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:19.943Z,1513252459.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:19.963Z,1513252459.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:20.369Z,1513252460.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:20.416Z,1513252460.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:20.750Z,1513252460.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:20.771Z,1513252460.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:21.164Z,1513252461.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:21.199Z,1513252461.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:21.530Z,1513252461.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:21.566Z,1513252461.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:21.934Z,1513252461.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:21.960Z,1513252461.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:22.361Z,1513252462.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:22.380Z,1513252462.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:22.730Z,1513252462.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:22.767Z,1513252462.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:23.156Z,1513252463.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:23.170Z,1513252463.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:23.566Z,1513252463.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:23.606Z,1513252463.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:23.956Z,1513252463.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:23.975Z,1513252463.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:24.429Z,1513252464.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:24.484Z,1513252464.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:24.747Z,1513252464.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:24.775Z,1513252464.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:25.139Z,1513252465.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:25.171Z,1513252465.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:25.533Z,1513252465.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:25.548Z,1513252465.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:25.933Z,1513252465.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:25.949Z,1513252465.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:26.341Z,1513252466.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:26.380Z,1513252466.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:26.770Z,1513252466.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:26.791Z,1513252466.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:27.150Z,1513252467.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:27.173Z,1513252467.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:27.536Z,1513252467.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:27.552Z,1513252467.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:27.941Z,1513252467.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:27.956Z,1513252467.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:28.336Z,1513252468.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:28.353Z,1513252468.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:28.740Z,1513252468.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:28.756Z,1513252468.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:29.153Z,1513252469.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:29.180Z,1513252469.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:29.554Z,1513252469.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:29.576Z,1513252469.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:29.977Z,1513252469.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:29.999Z,1513252469.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:30.345Z,1513252470.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:30.381Z,1513252470.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:30.774Z,1513252470.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:30.797Z,1513252470.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:31.138Z,1513252471.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:31.156Z,1513252471.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:31.540Z,1513252471.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:31.555Z,1513252471.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:31.941Z,1513252471.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:31.957Z,1513252471.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:32.372Z,1513252472.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:32.407Z,1513252472.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:32.746Z,1513252472.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:32.765Z,1513252472.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:33.147Z,1513252473.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:33.162Z,1513252473.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:33.543Z,1513252473.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:33.559Z,1513252473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:33.964Z,1513252473.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:34.030Z,1513252474.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:34.345Z,1513252474.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:34.380Z,1513252474.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:34.738Z,1513252474.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:34.770Z,1513252474.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:35.158Z,1513252475.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:35.173Z,1513252475.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:35.556Z,1513252475.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:35.566Z,1513252475.566 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:54:35.566Z,1513252475.566 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:54:35.566Z,1513252475.566 [BPC1](ERROR): Communications Fault
2017-12-14T11:54:35.574Z,1513252475.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:35.588Z,1513252475.588 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:54:35.946Z,1513252475.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:35.967Z,1513252475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:36.337Z,1513252476.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:36.389Z,1513252476.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:36.740Z,1513252476.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:36.771Z,1513252476.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:36.793Z,1513252476.793 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:54:36.793Z,1513252476.793 [BPC1] No Fault, FailCount= 1
2017-12-14T11:54:37.167Z,1513252477.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:37.278Z,1513252477.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:37.540Z,1513252477.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:37.556Z,1513252477.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:37.933Z,1513252477.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:37.949Z,1513252477.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:38.389Z,1513252478.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:38.429Z,1513252478.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:38.751Z,1513252478.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:38.766Z,1513252478.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:39.159Z,1513252479.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:39.194Z,1513252479.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:39.544Z,1513252479.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:39.567Z,1513252479.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:39.943Z,1513252479.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:39.960Z,1513252479.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:40.343Z,1513252480.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:40.395Z,1513252480.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:40.732Z,1513252480.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:40.775Z,1513252480.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:41.151Z,1513252481.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:41.167Z,1513252481.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:41.559Z,1513252481.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:41.574Z,1513252481.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:41.946Z,1513252481.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:41.978Z,1513252481.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:42.349Z,1513252482.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:42.363Z,1513252482.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:42.731Z,1513252482.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:42.764Z,1513252482.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:43.134Z,1513252483.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:43.160Z,1513252483.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:43.567Z,1513252483.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:43.622Z,1513252483.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:43.929Z,1513252483.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:43.964Z,1513252483.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:44.359Z,1513252484.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:44.378Z,1513252484.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:44.761Z,1513252484.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:44.776Z,1513252484.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:48.166Z,1513252488.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:48.227Z,1513252488.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:48.362Z,1513252488.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:48.395Z,1513252488.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:48.755Z,1513252488.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:48.772Z,1513252488.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:49.159Z,1513252489.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:49.175Z,1513252489.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:49.557Z,1513252489.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:49.572Z,1513252489.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:49.963Z,1513252489.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:49.000Z,1513252490.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:50.365Z,1513252490.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:50.384Z,1513252490.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:50.765Z,1513252490.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:50.780Z,1513252490.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:51.167Z,1513252491.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:51.181Z,1513252491.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:51.560Z,1513252491.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:51.575Z,1513252491.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:51.961Z,1513252491.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:51.975Z,1513252491.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:52.386Z,1513252492.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:52.408Z,1513252492.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:52.750Z,1513252492.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:52.773Z,1513252492.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:53.189Z,1513252493.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:53.220Z,1513252493.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:53.570Z,1513252493.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:53.585Z,1513252493.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:53.967Z,1513252493.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:53.982Z,1513252493.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:54.357Z,1513252494.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:54.372Z,1513252494.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:54.758Z,1513252494.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:54.773Z,1513252494.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:55.149Z,1513252495.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:55.181Z,1513252495.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:55.551Z,1513252495.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:55.576Z,1513252495.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:55.951Z,1513252495.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:55.976Z,1513252495.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:56.404Z,1513252496.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:56.443Z,1513252496.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:56.771Z,1513252496.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:56.791Z,1513252496.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:57.162Z,1513252497.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:57.187Z,1513252497.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:57.579Z,1513252497.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:57.607Z,1513252497.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:57.951Z,1513252497.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:57.988Z,1513252497.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:58.349Z,1513252498.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:58.389Z,1513252498.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:58.751Z,1513252498.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:58.807Z,1513252498.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:59.166Z,1513252499.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:59.195Z,1513252499.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:59.611Z,1513252499.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:54:59.648Z,1513252499.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:54:59.966Z,1513252499.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:00.019Z,1513252500.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:00.349Z,1513252500.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:00.372Z,1513252500.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:00.755Z,1513252500.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:00.815Z,1513252500.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:01.155Z,1513252501.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:01.195Z,1513252501.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:01.553Z,1513252501.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:01.568Z,1513252501.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:01.944Z,1513252501.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:01.959Z,1513252501.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:02.370Z,1513252502.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:02.399Z,1513252502.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:02.795Z,1513252502.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:02.823Z,1513252502.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:03.158Z,1513252503.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:03.179Z,1513252503.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:03.552Z,1513252503.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:03.571Z,1513252503.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:03.957Z,1513252503.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:03.971Z,1513252503.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:04.358Z,1513252504.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:04.379Z,1513252504.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:04.755Z,1513252504.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:04.770Z,1513252504.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:05.159Z,1513252505.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:05.179Z,1513252505.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:05.569Z,1513252505.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:05.584Z,1513252505.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:05.978Z,1513252505.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:06.007Z,1513252506.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:06.384Z,1513252506.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:06.405Z,1513252506.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:06.757Z,1513252506.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:06.780Z,1513252506.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:07.162Z,1513252507.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:07.176Z,1513252507.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:07.548Z,1513252507.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:07.579Z,1513252507.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:07.944Z,1513252507.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:07.970Z,1513252507.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:08.369Z,1513252508.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:08.387Z,1513252508.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:08.771Z,1513252508.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:08.786Z,1513252508.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:09.176Z,1513252509.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:09.230Z,1513252509.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:09.547Z,1513252509.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:09.575Z,1513252509.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:09.947Z,1513252509.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:09.980Z,1513252509.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:10.360Z,1513252510.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:10.375Z,1513252510.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:10.746Z,1513252510.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:10.783Z,1513252510.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:11.174Z,1513252511.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:11.189Z,1513252511.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:11.573Z,1513252511.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:11.587Z,1513252511.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:11.968Z,1513252511.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:11.983Z,1513252511.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:12.398Z,1513252512.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:12.441Z,1513252512.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:12.751Z,1513252512.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:12.778Z,1513252512.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:13.165Z,1513252513.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:13.180Z,1513252513.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:13.566Z,1513252513.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:13.580Z,1513252513.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:13.942Z,1513252513.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:13.977Z,1513252513.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:14.367Z,1513252514.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:14.387Z,1513252514.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:14.766Z,1513252514.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:14.797Z,1513252514.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:15.172Z,1513252515.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:15.186Z,1513252515.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:15.578Z,1513252515.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:15.599Z,1513252515.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:15.958Z,1513252515.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:15.989Z,1513252515.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:16.350Z,1513252516.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:16.395Z,1513252516.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:16.751Z,1513252516.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:16.766Z,1513252516.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:17.166Z,1513252517.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:17.190Z,1513252517.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:17.570Z,1513252517.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:17.599Z,1513252517.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:17.966Z,1513252517.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:17.992Z,1513252517.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:18.356Z,1513252518.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:18.397Z,1513252518.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:18.809Z,1513252518.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:18.848Z,1513252518.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:19.154Z,1513252519.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:19.170Z,1513252519.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:19.560Z,1513252519.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:19.616Z,1513252519.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:19.957Z,1513252519.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:19.973Z,1513252519.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:20.404Z,1513252520.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:20.442Z,1513252520.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:20.767Z,1513252520.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:20.783Z,1513252520.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:21.162Z,1513252521.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:21.230Z,1513252521.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:21.551Z,1513252521.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:21.569Z,1513252521.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:21.969Z,1513252521.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:22.009Z,1513252522.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:22.370Z,1513252522.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:22.422Z,1513252522.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:22.752Z,1513252522.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:22.783Z,1513252522.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:23.162Z,1513252523.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:23.218Z,1513252523.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:23.565Z,1513252523.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:23.597Z,1513252523.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:23.962Z,1513252523.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:23.992Z,1513252523.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:24.348Z,1513252524.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:24.383Z,1513252524.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:24.760Z,1513252524.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:24.795Z,1513252524.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:25.189Z,1513252525.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:25.208Z,1513252525.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:25.563Z,1513252525.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:25.595Z,1513252525.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:25.958Z,1513252525.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:25.993Z,1513252525.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:26.362Z,1513252526.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:26.395Z,1513252526.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:26.765Z,1513252526.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:26.799Z,1513252526.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:27.152Z,1513252527.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:27.195Z,1513252527.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:27.548Z,1513252527.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:27.564Z,1513252527.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:27.955Z,1513252527.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:27.970Z,1513252527.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:28.402Z,1513252528.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:28.454Z,1513252528.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:28.765Z,1513252528.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:28.780Z,1513252528.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:29.169Z,1513252529.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:29.184Z,1513252529.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:29.560Z,1513252529.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:29.575Z,1513252529.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:29.948Z,1513252529.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:29.980Z,1513252529.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:30.358Z,1513252530.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:30.379Z,1513252530.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:30.751Z,1513252530.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:30.787Z,1513252530.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:31.167Z,1513252531.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:31.182Z,1513252531.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:31.572Z,1513252531.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:31.635Z,1513252531.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:31.969Z,1513252531.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:31.986Z,1513252531.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:32.348Z,1513252532.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:32.383Z,1513252532.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:32.747Z,1513252532.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:32.779Z,1513252532.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:33.151Z,1513252533.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:33.177Z,1513252533.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:33.552Z,1513252533.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:33.579Z,1513252533.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:33.948Z,1513252533.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:33.975Z,1513252533.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:34.399Z,1513252534.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:34.426Z,1513252534.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:34.782Z,1513252534.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:34.823Z,1513252534.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:35.167Z,1513252535.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:35.187Z,1513252535.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:35.547Z,1513252535.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:35.572Z,1513252535.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:35.978Z,1513252535.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:35.993Z,1513252535.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:36.348Z,1513252536.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:36.380Z,1513252536.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:36.747Z,1513252536.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:36.779Z,1513252536.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:37.158Z,1513252537.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:37.183Z,1513252537.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:37.565Z,1513252537.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:37.595Z,1513252537.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:37.991Z,1513252537.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:38.043Z,1513252538.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:38.348Z,1513252538.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:38.383Z,1513252538.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:38.747Z,1513252538.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:38.780Z,1513252538.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:39.151Z,1513252539.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:39.189Z,1513252539.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:39.552Z,1513252539.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:39.587Z,1513252539.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:39.951Z,1513252539.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:39.966Z,1513252539.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:40.362Z,1513252540.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:40.393Z,1513252540.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:40.762Z,1513252540.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:40.794Z,1513252540.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:41.168Z,1513252541.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:41.203Z,1513252541.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:41.556Z,1513252541.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:41.596Z,1513252541.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:41.954Z,1513252541.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:41.968Z,1513252541.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:42.358Z,1513252542.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:42.416Z,1513252542.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:42.756Z,1513252542.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:42.771Z,1513252542.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:43.171Z,1513252543.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:43.200Z,1513252543.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:43.566Z,1513252543.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:43.590Z,1513252543.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:43.968Z,1513252543.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:44.025Z,1513252544.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:44.358Z,1513252544.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:44.376Z,1513252544.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:44.748Z,1513252544.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:44.814Z,1513252544.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:48.148Z,1513252548.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:48.170Z,1513252548.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:48.271Z,1513252548.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:48.377Z,1513252548.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:48.642Z,1513252548.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:48.665Z,1513252548.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:49.052Z,1513252549.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:49.067Z,1513252549.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:49.443Z,1513252549.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:49.467Z,1513252549.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:49.839Z,1513252549.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:49.854Z,1513252549.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:50.234Z,1513252550.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:50.249Z,1513252550.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:50.687Z,1513252550.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:50.767Z,1513252550.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:51.052Z,1513252551.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:51.084Z,1513252551.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:51.446Z,1513252551.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:51.467Z,1513252551.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:51.830Z,1513252551.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:51.858Z,1513252551.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:51.861Z,1513252551.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:52.229Z,1513252552.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:52.264Z,1513252552.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:52.654Z,1513252552.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:52.688Z,1513252552.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:52.711Z,1513252552.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:53.038Z,1513252553.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:53.065Z,1513252553.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:53.067Z,1513252553.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:53.440Z,1513252553.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:53.459Z,1513252553.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:53.847Z,1513252553.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:53.862Z,1513252553.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:54.220Z,1513252554.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:54.324Z,1513252554.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:54.637Z,1513252554.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:54.644Z,1513252554.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x31628 got:0x36833
2017-12-14T11:55:54.691Z,1513252554.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:55.038Z,1513252555.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:55.052Z,1513252555.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:55.433Z,1513252555.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:55.457Z,1513252555.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:55.841Z,1513252555.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:55.883Z,1513252555.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:56.235Z,1513252556.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:56.306Z,1513252556.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:56.631Z,1513252556.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:56.698Z,1513252556.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:57.054Z,1513252557.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:57.083Z,1513252557.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:57.453Z,1513252557.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:57.475Z,1513252557.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:57.842Z,1513252557.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:57.858Z,1513252557.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:58.233Z,1513252558.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:58.317Z,1513252558.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:58.617Z,1513252558.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:58.678Z,1513252558.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:59.037Z,1513252559.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:59.061Z,1513252559.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:59.440Z,1513252559.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:59.462Z,1513252559.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:55:59.838Z,1513252559.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:55:59.861Z,1513252559.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:00.228Z,1513252560.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:00.356Z,1513252560.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:00.619Z,1513252560.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:00.657Z,1513252560.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:01.040Z,1513252561.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:01.061Z,1513252561.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:01.435Z,1513252561.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:01.457Z,1513252561.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:01.834Z,1513252561.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:01.869Z,1513252561.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:02.223Z,1513252562.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:02.258Z,1513252562.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:02.626Z,1513252562.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:02.675Z,1513252562.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:03.045Z,1513252563.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:03.073Z,1513252563.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:03.444Z,1513252563.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:03.477Z,1513252563.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:03.834Z,1513252563.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:03.852Z,1513252563.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:04.230Z,1513252564.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:04.249Z,1513252564.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:04.678Z,1513252564.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:04.714Z,1513252564.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:05.034Z,1513252565.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:05.071Z,1513252565.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:05.451Z,1513252565.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:05.471Z,1513252565.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:05.836Z,1513252565.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:05.875Z,1513252565.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:06.230Z,1513252566.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:06.256Z,1513252566.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:06.720Z,1513252566.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:06.760Z,1513252566.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:07.043Z,1513252567.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:07.058Z,1513252567.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:07.441Z,1513252567.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:07.459Z,1513252567.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:07.838Z,1513252567.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:07.895Z,1513252567.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:08.232Z,1513252568.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:08.316Z,1513252568.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:08.619Z,1513252568.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:08.675Z,1513252568.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:09.047Z,1513252569.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:09.063Z,1513252569.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:09.443Z,1513252569.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:09.483Z,1513252569.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:09.846Z,1513252569.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:09.879Z,1513252569.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:10.236Z,1513252570.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:10.358Z,1513252570.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:10.628Z,1513252570.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:10.642Z,1513252570.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:11.041Z,1513252571.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:11.068Z,1513252571.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:11.448Z,1513252571.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:11.472Z,1513252571.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:11.843Z,1513252571.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:11.869Z,1513252571.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:12.226Z,1513252572.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:12.304Z,1513252572.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:12.631Z,1513252572.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:12.653Z,1513252572.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:13.068Z,1513252573.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:13.088Z,1513252573.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:13.444Z,1513252573.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:13.465Z,1513252573.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:13.840Z,1513252573.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:13.863Z,1513252573.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:14.237Z,1513252574.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:14.316Z,1513252574.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:14.616Z,1513252574.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:14.670Z,1513252574.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:15.045Z,1513252575.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:15.067Z,1513252575.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:15.448Z,1513252575.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:15.462Z,1513252575.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:15.831Z,1513252575.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:15.859Z,1513252575.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:16.254Z,1513252576.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:16.322Z,1513252576.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:16.619Z,1513252576.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:16.661Z,1513252576.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:17.046Z,1513252577.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:17.061Z,1513252577.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:17.446Z,1513252577.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:17.461Z,1513252577.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:17.851Z,1513252577.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:17.865Z,1513252577.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:18.221Z,1513252578.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:18.262Z,1513252578.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:18.683Z,1513252578.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:18.738Z,1513252578.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:19.034Z,1513252579.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:19.081Z,1513252579.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:19.451Z,1513252579.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:19.474Z,1513252579.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:19.840Z,1513252579.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:19.892Z,1513252579.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:20.227Z,1513252580.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:20.269Z,1513252580.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:20.666Z,1513252580.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:20.772Z,1513252580.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:21.058Z,1513252581.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:21.101Z,1513252581.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:21.447Z,1513252581.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:21.461Z,1513252581.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:21.887Z,1513252581.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:21.931Z,1513252581.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:22.272Z,1513252582.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:22.347Z,1513252582.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:22.630Z,1513252582.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:22.691Z,1513252582.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:23.027Z,1513252583.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:23.062Z,1513252583.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x4209 got:0x32992
2017-12-14T11:56:23.115Z,1513252583.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:23.442Z,1513252583.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:23.482Z,1513252583.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:23.834Z,1513252583.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:23.875Z,1513252583.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:24.251Z,1513252584.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:24.357Z,1513252584.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:24.653Z,1513252584.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:24.683Z,1513252584.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:25.062Z,1513252585.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:25.078Z,1513252585.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:25.444Z,1513252585.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:25.486Z,1513252585.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:25.830Z,1513252585.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:25.880Z,1513252585.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:26.222Z,1513252586.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:26.270Z,1513252586.270 [PNI_TCM](ERROR): CRC does not match. Expected:0x31238 got:0x6591
2017-12-14T11:56:26.340Z,1513252586.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:26.635Z,1513252586.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:26.677Z,1513252586.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:27.032Z,1513252587.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:27.078Z,1513252587.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:27.440Z,1513252587.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:27.506Z,1513252587.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:27.839Z,1513252587.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:27.902Z,1513252587.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:28.293Z,1513252588.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:28.334Z,1513252588.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:28.624Z,1513252588.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:28.666Z,1513252588.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:29.062Z,1513252589.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:29.095Z,1513252589.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:29.447Z,1513252589.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:29.522Z,1513252589.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:29.850Z,1513252589.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:29.868Z,1513252589.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:30.224Z,1513252590.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:30.255Z,1513252590.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:30.657Z,1513252590.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:30.674Z,1513252590.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:31.038Z,1513252591.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:31.129Z,1513252591.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:31.467Z,1513252591.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:31.524Z,1513252591.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:31.832Z,1513252591.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:31.872Z,1513252591.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:32.221Z,1513252592.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:32.348Z,1513252592.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:32.663Z,1513252592.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:32.682Z,1513252592.682 [PNI_TCM](ERROR): CRC does not match. Expected:0x32678 got:0x16897
2017-12-14T11:56:32.731Z,1513252592.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:33.044Z,1513252593.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:33.108Z,1513252593.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:33.445Z,1513252593.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:33.515Z,1513252593.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:33.832Z,1513252593.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:33.883Z,1513252593.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:34.224Z,1513252594.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:34.294Z,1513252594.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:34.658Z,1513252594.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:34.714Z,1513252594.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:35.046Z,1513252595.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:35.071Z,1513252595.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:35.446Z,1513252595.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:35.492Z,1513252595.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:35.838Z,1513252595.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:35.880Z,1513252595.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:36.229Z,1513252596.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:36.315Z,1513252596.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:36.647Z,1513252596.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:36.718Z,1513252596.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:37.048Z,1513252597.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:37.103Z,1513252597.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:37.452Z,1513252597.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:37.494Z,1513252597.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:37.844Z,1513252597.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:37.901Z,1513252597.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:38.241Z,1513252598.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:38.348Z,1513252598.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:38.620Z,1513252598.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:38.663Z,1513252598.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:39.036Z,1513252599.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:39.087Z,1513252599.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:39.439Z,1513252599.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:39.479Z,1513252599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:39.833Z,1513252599.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:39.868Z,1513252599.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:40.233Z,1513252600.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:40.340Z,1513252600.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:40.620Z,1513252600.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:40.657Z,1513252600.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:41.047Z,1513252601.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:41.054Z,1513252601.054 [PNI_TCM](ERROR): CRC does not match. Expected:0x3656 got:0x42012
2017-12-14T11:56:41.083Z,1513252601.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:41.435Z,1513252601.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:41.484Z,1513252601.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:41.832Z,1513252601.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:41.899Z,1513252601.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:42.222Z,1513252602.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:42.354Z,1513252602.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:42.630Z,1513252602.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:42.671Z,1513252602.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:43.048Z,1513252603.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:43.086Z,1513252603.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:43.435Z,1513252603.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:43.474Z,1513252603.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:43.842Z,1513252603.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:43.887Z,1513252603.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:44.238Z,1513252604.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:44.294Z,1513252604.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:44.627Z,1513252604.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:44.671Z,1513252604.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:45.032Z,1513252605.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:45.078Z,1513252605.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:50.455Z,1513252610.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:50.471Z,1513252610.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:50.586Z,1513252610.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:50.631Z,1513252610.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:50.923Z,1513252610.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:50.959Z,1513252610.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:51.327Z,1513252611.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:51.362Z,1513252611.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:51.724Z,1513252611.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:51.764Z,1513252611.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:52.135Z,1513252612.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:52.166Z,1513252612.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:52.538Z,1513252612.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:52.562Z,1513252612.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:52.938Z,1513252612.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:52.960Z,1513252612.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:53.325Z,1513252613.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:53.343Z,1513252613.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:53.726Z,1513252613.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:53.776Z,1513252613.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:54.132Z,1513252614.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:54.168Z,1513252614.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:54.529Z,1513252614.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:54.575Z,1513252614.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:54.924Z,1513252614.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:54.939Z,1513252614.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:55.330Z,1513252615.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:55.391Z,1513252615.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:55.738Z,1513252615.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:55.752Z,1513252615.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:56.142Z,1513252616.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:56.174Z,1513252616.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:56.526Z,1513252616.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:56.541Z,1513252616.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:56.923Z,1513252616.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:56.952Z,1513252616.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:57.328Z,1513252617.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:57.343Z,1513252617.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:57.724Z,1513252617.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:57.744Z,1513252617.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:58.133Z,1513252618.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:58.148Z,1513252618.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:58.534Z,1513252618.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:58.548Z,1513252618.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:58.930Z,1513252618.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:58.946Z,1513252618.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:59.327Z,1513252619.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:59.341Z,1513252619.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:56:59.725Z,1513252619.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:56:59.740Z,1513252619.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:00.128Z,1513252620.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:00.143Z,1513252620.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:00.529Z,1513252620.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:00.544Z,1513252620.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:00.919Z,1513252620.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:00.955Z,1513252620.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:01.342Z,1513252621.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:01.357Z,1513252621.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:01.737Z,1513252621.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:01.767Z,1513252621.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:02.136Z,1513252622.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:02.164Z,1513252622.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:02.527Z,1513252622.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:02.563Z,1513252622.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:02.934Z,1513252622.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:02.949Z,1513252622.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:03.330Z,1513252623.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:03.344Z,1513252623.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:03.730Z,1513252623.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:03.784Z,1513252623.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:04.140Z,1513252624.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:04.159Z,1513252624.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:04.561Z,1513252624.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:04.610Z,1513252624.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:04.947Z,1513252624.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:04.962Z,1513252624.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:05.319Z,1513252625.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:05.351Z,1513252625.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:05.722Z,1513252625.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:05.755Z,1513252625.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:06.119Z,1513252626.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:06.154Z,1513252626.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:06.519Z,1513252626.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:06.553Z,1513252626.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:06.919Z,1513252626.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:06.955Z,1513252626.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:07.347Z,1513252627.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:07.362Z,1513252627.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:07.767Z,1513252627.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:07.795Z,1513252627.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:08.129Z,1513252628.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:08.167Z,1513252628.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:08.527Z,1513252628.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:08.551Z,1513252628.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:08.919Z,1513252628.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:08.946Z,1513252628.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:09.319Z,1513252629.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:09.372Z,1513252629.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:09.721Z,1513252629.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:09.736Z,1513252629.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:10.134Z,1513252630.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:10.149Z,1513252630.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:10.533Z,1513252630.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:10.548Z,1513252630.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:10.949Z,1513252630.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:10.968Z,1513252630.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:11.319Z,1513252631.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:11.339Z,1513252631.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:11.720Z,1513252631.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:11.735Z,1513252631.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:12.124Z,1513252632.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:12.138Z,1513252632.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:12.519Z,1513252632.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:12.539Z,1513252632.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:12.935Z,1513252632.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:12.951Z,1513252632.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:13.333Z,1513252633.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:13.348Z,1513252633.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:13.732Z,1513252633.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:13.751Z,1513252633.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:14.155Z,1513252634.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:14.187Z,1513252634.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:14.520Z,1513252634.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:14.539Z,1513252634.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:14.919Z,1513252634.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:14.934Z,1513252634.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:15.321Z,1513252635.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:15.336Z,1513252635.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:15.429Z,1513252635.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:15.723Z,1513252635.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:15.743Z,1513252635.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:15.743Z,1513252635.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 228
2017-12-14T11:57:15.743Z,1513252635.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T11:57:15.745Z,1513252635.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:15.745Z,1513252635.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 228
2017-12-14T11:57:15.745Z,1513252635.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T11:57:15.747Z,1513252635.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:15.747Z,1513252635.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 228
2017-12-14T11:57:15.747Z,1513252635.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T11:57:15.760Z,1513252635.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T11:57:15.760Z,1513252635.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T11:57:15.761Z,1513252635.761 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T11:57:16.133Z,1513252636.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:16.158Z,1513252636.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T11:57:16.158Z,1513252636.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 228
2017-12-14T11:57:16.158Z,1513252636.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T11:57:16.158Z,1513252636.158 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 228
2017-12-14T11:57:16.159Z,1513252636.159 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T11:57:16.159Z,1513252636.159 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 228
2017-12-14T11:57:16.226Z,1513252636.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:16.529Z,1513252636.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:16.542Z,1513252636.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T11:57:16.543Z,1513252636.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:57:16.543Z,1513252636.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:57:16.543Z,1513252636.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T11:57:16.544Z,1513252636.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:57:16.544Z,1513252636.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:57:16.544Z,1513252636.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T11:57:16.545Z,1513252636.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T11:57:16.545Z,1513252636.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T11:57:16.934Z,1513252636.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:16.948Z,1513252636.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:17.330Z,1513252637.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:17.374Z,1513252637.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:17.715Z,1513252637.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:17.730Z,1513252637.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:18.120Z,1513252638.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:18.135Z,1513252638.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:18.523Z,1513252638.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:18.538Z,1513252638.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:18.912Z,1513252638.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:18.920Z,1513252638.920 [BPC1](ERROR): Failed to receive battery data
2017-12-14T11:57:18.920Z,1513252638.920 [BPC1] Communications Fault, FailCount= 1
2017-12-14T11:57:18.921Z,1513252638.921 [BPC1](ERROR): Communications Fault
2017-12-14T11:57:18.928Z,1513252638.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:18.941Z,1513252638.941 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T11:57:19.333Z,1513252639.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:19.348Z,1513252639.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:19.733Z,1513252639.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:19.755Z,1513252639.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:20.134Z,1513252640.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:20.151Z,1513252640.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:20.164Z,1513252640.164 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:57:20.164Z,1513252640.164 [BPC1] No Fault, FailCount= 1
2017-12-14T11:57:20.521Z,1513252640.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:20.611Z,1513252640.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:20.953Z,1513252640.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:20.969Z,1513252640.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:21.321Z,1513252641.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:21.335Z,1513252641.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:21.720Z,1513252641.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:21.735Z,1513252641.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:22.138Z,1513252642.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:22.152Z,1513252642.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:22.538Z,1513252642.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:22.559Z,1513252642.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:22.934Z,1513252642.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:22.955Z,1513252642.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:23.320Z,1513252643.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:23.335Z,1513252643.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:23.717Z,1513252643.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:23.732Z,1513252643.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:24.120Z,1513252644.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:24.135Z,1513252644.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:24.523Z,1513252644.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:24.538Z,1513252644.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:24.924Z,1513252644.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:24.943Z,1513252644.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:25.360Z,1513252645.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:25.375Z,1513252645.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:25.737Z,1513252645.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:25.753Z,1513252645.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:26.133Z,1513252646.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:26.147Z,1513252646.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:26.519Z,1513252646.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:26.539Z,1513252646.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:26.574Z,1513252646.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:26.934Z,1513252646.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:26.955Z,1513252646.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:27.324Z,1513252647.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:27.339Z,1513252647.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:27.369Z,1513252647.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:27.722Z,1513252647.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:27.736Z,1513252647.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:28.134Z,1513252648.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:28.149Z,1513252648.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:28.165Z,1513252648.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:28.526Z,1513252648.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:28.541Z,1513252648.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:28.927Z,1513252648.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:28.963Z,1513252648.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:28.975Z,1513252648.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:29.322Z,1513252649.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:29.338Z,1513252649.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:29.724Z,1513252649.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:29.739Z,1513252649.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:29.757Z,1513252649.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:30.134Z,1513252650.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:30.154Z,1513252650.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:30.520Z,1513252650.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:30.544Z,1513252650.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:30.554Z,1513252650.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:30.920Z,1513252650.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:30.962Z,1513252650.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:31.331Z,1513252651.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:31.349Z,1513252651.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:31.374Z,1513252651.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:31.734Z,1513252651.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:31.754Z,1513252651.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:31.759Z,1513252651.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:32.130Z,1513252652.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:32.156Z,1513252652.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:32.157Z,1513252652.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:32.519Z,1513252652.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:32.546Z,1513252652.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:32.561Z,1513252652.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:32.920Z,1513252652.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:32.960Z,1513252652.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:32.966Z,1513252652.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:33.320Z,1513252653.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:33.360Z,1513252653.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:33.369Z,1513252653.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:33.719Z,1513252653.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:33.747Z,1513252653.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:33.773Z,1513252653.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.130Z,1513252654.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.155Z,1513252654.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:34.178Z,1513252654.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.534Z,1513252654.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.571Z,1513252654.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:34.581Z,1513252654.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.931Z,1513252654.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:34.957Z,1513252654.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:34.993Z,1513252654.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:35.319Z,1513252655.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:35.356Z,1513252655.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:35.397Z,1513252655.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:35.723Z,1513252655.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:35.738Z,1513252655.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:35.801Z,1513252655.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:36.127Z,1513252656.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:36.207Z,1513252656.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:36.530Z,1513252656.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:36.545Z,1513252656.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:36.597Z,1513252656.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:36.929Z,1513252656.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:36.944Z,1513252656.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:37.001Z,1513252657.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:37.331Z,1513252657.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:37.351Z,1513252657.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:37.746Z,1513252657.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:37.781Z,1513252657.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:37.797Z,1513252657.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:38.142Z,1513252658.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:38.209Z,1513252658.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:38.518Z,1513252658.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:38.548Z,1513252658.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:38.593Z,1513252658.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:38.919Z,1513252658.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:38.946Z,1513252658.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:38.997Z,1513252658.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:39.327Z,1513252659.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:39.431Z,1513252659.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:39.728Z,1513252659.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:39.743Z,1513252659.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:39.793Z,1513252659.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:40.138Z,1513252660.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:40.170Z,1513252660.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:40.540Z,1513252660.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:40.571Z,1513252660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:40.589Z,1513252660.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:40.942Z,1513252660.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:40.993Z,1513252660.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:41.008Z,1513252661.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:41.329Z,1513252661.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:41.344Z,1513252661.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:41.725Z,1513252661.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:41.776Z,1513252661.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:41.789Z,1513252661.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:42.126Z,1513252662.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:42.147Z,1513252662.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:42.526Z,1513252662.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:42.541Z,1513252662.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:42.586Z,1513252662.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:42.917Z,1513252662.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:42.951Z,1513252662.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:43.062Z,1513252663.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:43.341Z,1513252663.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:43.356Z,1513252663.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:43.745Z,1513252663.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:43.760Z,1513252663.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:43.857Z,1513252663.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:44.145Z,1513252664.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:44.160Z,1513252664.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:44.512Z,1513252664.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:44.543Z,1513252664.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:44.551Z,1513252664.551 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T11:52:44.2Z
2017-12-14T11:57:44.551Z,1513252664.551 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T11:57:44.551Z,1513252664.551 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T11:57:44.655Z,1513252664.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:44.919Z,1513252664.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:44.951Z,1513252664.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:45.098Z,1513252665.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:45.704Z,1513252665.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:45.719Z,1513252665.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:45.894Z,1513252665.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:46.690Z,1513252666.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:47.093Z,1513252667.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:47.889Z,1513252667.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:48.687Z,1513252668.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:48.916Z,1513252668.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:48.931Z,1513252668.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:49.025Z,1513252669.025 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0264.lzma
2017-12-14T11:57:49.080Z,1513252669.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:49.093Z,1513252669.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:49.126Z,1513252669.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:49.427Z,1513252669.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:49.451Z,1513252669.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:49.796Z,1513252669.796 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0264.lzma.bak
2017-12-14T11:57:49.796Z,1513252669.796 [DataOverHttps](INFO): SBD MOMSN=5438670
2017-12-14T11:57:49.849Z,1513252669.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:49.889Z,1513252669.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:49.904Z,1513252669.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:50.686Z,1513252670.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:51.070Z,1513252671.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:51.089Z,1513252671.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:51.092Z,1513252671.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:51.199Z,1513252671.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:51.235Z,1513252671.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:51.885Z,1513252671.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:52.681Z,1513252672.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:53.085Z,1513252673.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:53.881Z,1513252673.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:54.677Z,1513252674.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:54.883Z,1513252674.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:54.898Z,1513252674.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:55.021Z,1513252675.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:55.036Z,1513252675.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:55.081Z,1513252675.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:55.375Z,1513252675.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:55.400Z,1513252675.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:55.759Z,1513252675.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:55.779Z,1513252675.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:55.877Z,1513252675.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:56.151Z,1513252676.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:56.186Z,1513252676.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:56.556Z,1513252676.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:56.585Z,1513252676.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:57:56.674Z,1513252676.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:57.077Z,1513252677.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:57.874Z,1513252677.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:58.669Z,1513252678.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:59.077Z,1513252679.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:57:59.873Z,1513252679.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:00.110Z,1513252680.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:00.119Z,1513252680.119 [BPC1](ERROR): Failed to parse message.
2017-12-14T11:58:00.119Z,1513252680.119 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T11:58:00.119Z,1513252680.119 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:58:00.119Z,1513252680.119 [BPC1](ERROR): Data Fault
2017-12-14T11:58:00.127Z,1513252680.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:00.166Z,1513252680.166 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:58:00.223Z,1513252680.223 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0265.lzma
2017-12-14T11:58:00.284Z,1513252680.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:00.344Z,1513252680.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:00.626Z,1513252680.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:00.647Z,1513252680.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:00.670Z,1513252680.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:00.984Z,1513252680.984 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0265.lzma.bak
2017-12-14T11:58:00.984Z,1513252680.984 [DataOverHttps](INFO): SBD MOMSN=5438672
2017-12-14T11:58:01.037Z,1513252681.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:01.064Z,1513252681.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:01.074Z,1513252681.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:01.078Z,1513252681.078 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:58:01.078Z,1513252681.078 [BPC1] No Fault, FailCount= 1
2017-12-14T11:58:01.869Z,1513252681.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:02.289Z,1513252682.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:02.425Z,1513252682.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:02.428Z,1513252682.428 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T11:58:02.428Z,1513252682.428 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T11:58:02.428Z,1513252682.428 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T11:58:02.522Z,1513252682.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:02.555Z,1513252682.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:02.665Z,1513252682.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:03.069Z,1513252683.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:03.865Z,1513252683.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:04.661Z,1513252684.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:05.065Z,1513252685.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:05.861Z,1513252685.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:05.918Z,1513252685.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:05.949Z,1513252685.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:06.050Z,1513252686.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:06.099Z,1513252686.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:06.408Z,1513252686.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:06.456Z,1513252686.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:06.657Z,1513252686.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:06.815Z,1513252686.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:06.847Z,1513252686.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:07.061Z,1513252687.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:07.208Z,1513252687.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:07.222Z,1513252687.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:07.603Z,1513252687.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:07.623Z,1513252687.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:07.857Z,1513252687.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:08.034Z,1513252688.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:08.058Z,1513252688.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:08.412Z,1513252688.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:08.459Z,1513252688.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:08.653Z,1513252688.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:08.826Z,1513252688.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:08.856Z,1513252688.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:09.057Z,1513252689.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:09.208Z,1513252689.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:09.223Z,1513252689.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:09.600Z,1513252689.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:09.615Z,1513252689.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:09.853Z,1513252689.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:10.013Z,1513252690.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:10.027Z,1513252690.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:10.414Z,1513252690.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:10.457Z,1513252690.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:10.651Z,1513252690.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:10.811Z,1513252690.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:10.831Z,1513252690.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:11.057Z,1513252691.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:11.204Z,1513252691.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:11.220Z,1513252691.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:11.613Z,1513252691.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:11.669Z,1513252691.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:11.853Z,1513252691.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:12.012Z,1513252692.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:12.035Z,1513252692.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:12.412Z,1513252692.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:12.456Z,1513252692.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:12.654Z,1513252692.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:12.826Z,1513252692.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:12.840Z,1513252692.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:13.061Z,1513252693.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:13.203Z,1513252693.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:13.230Z,1513252693.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:13.598Z,1513252693.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:13.623Z,1513252693.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:13.860Z,1513252693.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:14.018Z,1513252694.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:14.032Z,1513252694.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:14.419Z,1513252694.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:14.443Z,1513252694.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:14.653Z,1513252694.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:14.856Z,1513252694.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:14.887Z,1513252694.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:15.057Z,1513252695.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:15.195Z,1513252695.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:15.231Z,1513252695.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:15.595Z,1513252695.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:15.628Z,1513252695.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:15.854Z,1513252695.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:16.003Z,1513252696.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:16.023Z,1513252696.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:16.415Z,1513252696.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:16.431Z,1513252696.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:16.649Z,1513252696.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:16.798Z,1513252696.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:16.827Z,1513252696.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:17.053Z,1513252697.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:17.214Z,1513252697.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:17.230Z,1513252697.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:17.617Z,1513252697.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:17.632Z,1513252697.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:17.849Z,1513252697.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:18.034Z,1513252698.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:18.063Z,1513252698.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:18.394Z,1513252698.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:18.431Z,1513252698.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:18.645Z,1513252698.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:18.795Z,1513252698.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:18.827Z,1513252698.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:19.049Z,1513252699.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:19.195Z,1513252699.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:19.235Z,1513252699.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:19.602Z,1513252699.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:19.637Z,1513252699.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:19.845Z,1513252699.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:20.017Z,1513252700.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:20.047Z,1513252700.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:20.410Z,1513252700.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:20.440Z,1513252700.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:20.641Z,1513252700.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:20.811Z,1513252700.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:20.842Z,1513252700.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:21.045Z,1513252701.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:21.244Z,1513252701.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:21.317Z,1513252701.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:21.646Z,1513252701.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:21.711Z,1513252701.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:21.841Z,1513252701.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:22.012Z,1513252702.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:22.081Z,1513252702.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:22.416Z,1513252702.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:22.430Z,1513252702.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:22.639Z,1513252702.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:22.814Z,1513252702.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:22.829Z,1513252702.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:23.049Z,1513252703.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:23.204Z,1513252703.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:23.255Z,1513252703.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:23.625Z,1513252703.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:23.639Z,1513252703.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:23.845Z,1513252703.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:24.009Z,1513252704.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:24.066Z,1513252704.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:24.460Z,1513252704.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:24.519Z,1513252704.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:24.647Z,1513252704.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:24.826Z,1513252704.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:24.840Z,1513252704.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:25.057Z,1513252705.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:25.203Z,1513252705.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:25.230Z,1513252705.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:25.606Z,1513252705.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:25.621Z,1513252705.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:25.854Z,1513252705.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:26.017Z,1513252706.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:26.040Z,1513252706.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:26.407Z,1513252706.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:26.425Z,1513252706.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:26.654Z,1513252706.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:26.810Z,1513252706.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:26.832Z,1513252706.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:27.200Z,1513252707.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:27.277Z,1513252707.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:27.449Z,1513252707.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:27.588Z,1513252707.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:27.620Z,1513252707.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:28.005Z,1513252708.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:28.039Z,1513252708.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:28.245Z,1513252708.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:28.435Z,1513252708.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:28.474Z,1513252708.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:28.806Z,1513252708.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:28.835Z,1513252708.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:29.043Z,1513252709.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:29.199Z,1513252709.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:29.231Z,1513252709.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:29.595Z,1513252709.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:29.632Z,1513252709.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:29.837Z,1513252709.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:30.005Z,1513252710.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:30.039Z,1513252710.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:30.421Z,1513252710.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:30.436Z,1513252710.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:30.633Z,1513252710.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:30.831Z,1513252710.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:30.846Z,1513252710.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:31.196Z,1513252711.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:31.283Z,1513252711.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:31.429Z,1513252711.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:31.596Z,1513252711.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:31.610Z,1513252711.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:32.014Z,1513252712.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:32.043Z,1513252712.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:32.225Z,1513252712.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:32.413Z,1513252712.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:32.479Z,1513252712.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:32.631Z,1513252712.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:32.827Z,1513252712.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:32.841Z,1513252712.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:33.037Z,1513252713.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:33.203Z,1513252713.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:33.257Z,1513252713.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:33.441Z,1513252713.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:33.599Z,1513252713.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:33.619Z,1513252713.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:33.845Z,1513252713.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:34.049Z,1513252714.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:34.094Z,1513252714.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:34.419Z,1513252714.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:34.451Z,1513252714.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:34.641Z,1513252714.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:34.814Z,1513252714.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:34.845Z,1513252714.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:35.045Z,1513252715.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:35.203Z,1513252715.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:35.218Z,1513252715.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:35.601Z,1513252715.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:35.632Z,1513252715.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:35.841Z,1513252715.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:36.019Z,1513252716.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:36.048Z,1513252716.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:36.413Z,1513252716.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:36.447Z,1513252716.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:36.637Z,1513252716.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:36.806Z,1513252716.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:36.824Z,1513252716.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:37.042Z,1513252717.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:37.223Z,1513252717.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:37.261Z,1513252717.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:37.604Z,1513252717.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:37.624Z,1513252717.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:37.839Z,1513252717.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:38.011Z,1513252718.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:38.028Z,1513252718.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:38.410Z,1513252718.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:38.426Z,1513252718.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:38.636Z,1513252718.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:38.826Z,1513252718.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:38.857Z,1513252718.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:39.053Z,1513252719.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:39.204Z,1513252719.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:39.220Z,1513252719.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:39.602Z,1513252719.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:39.623Z,1513252719.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:39.849Z,1513252719.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:40.009Z,1513252720.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:40.025Z,1513252720.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:40.466Z,1513252720.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:40.523Z,1513252720.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:40.647Z,1513252720.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:40.810Z,1513252720.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:40.843Z,1513252720.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:41.057Z,1513252721.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:41.197Z,1513252721.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:41.212Z,1513252721.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:41.600Z,1513252721.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:41.637Z,1513252721.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:41.853Z,1513252721.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:42.014Z,1513252722.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:42.047Z,1513252722.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:42.431Z,1513252722.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:42.451Z,1513252722.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:42.649Z,1513252722.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:42.813Z,1513252722.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:42.867Z,1513252722.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:43.053Z,1513252723.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:43.203Z,1513252723.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:43.218Z,1513252723.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:43.604Z,1513252723.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:43.619Z,1513252723.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:43.849Z,1513252723.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:44.018Z,1513252724.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:44.047Z,1513252724.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:44.417Z,1513252724.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:44.470Z,1513252724.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:44.645Z,1513252724.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:44.806Z,1513252724.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:44.820Z,1513252724.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:45.049Z,1513252725.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:45.204Z,1513252725.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:45.219Z,1513252725.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:45.605Z,1513252725.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:45.655Z,1513252725.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:45.845Z,1513252725.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:46.006Z,1513252726.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:46.027Z,1513252726.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:46.409Z,1513252726.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:46.459Z,1513252726.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:46.643Z,1513252726.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:46.806Z,1513252726.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:46.859Z,1513252726.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:47.049Z,1513252727.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:47.204Z,1513252727.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:47.223Z,1513252727.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:47.602Z,1513252727.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:47.616Z,1513252727.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:47.845Z,1513252727.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:48.014Z,1513252728.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:48.028Z,1513252728.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:48.413Z,1513252728.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:48.431Z,1513252728.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:48.644Z,1513252728.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:48.815Z,1513252728.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:48.829Z,1513252728.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:49.049Z,1513252729.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:49.207Z,1513252729.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:49.222Z,1513252729.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:49.607Z,1513252729.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:49.621Z,1513252729.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:49.845Z,1513252729.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:50.022Z,1513252730.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:50.058Z,1513252730.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:50.419Z,1513252730.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:50.434Z,1513252730.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:50.641Z,1513252730.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:50.825Z,1513252730.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:50.840Z,1513252730.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:51.045Z,1513252731.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:51.199Z,1513252731.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:51.226Z,1513252731.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:51.599Z,1513252731.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:51.632Z,1513252731.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:51.841Z,1513252731.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:52.012Z,1513252732.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:52.027Z,1513252732.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:52.418Z,1513252732.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:52.432Z,1513252732.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:52.639Z,1513252732.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:52.825Z,1513252732.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:52.847Z,1513252732.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:53.049Z,1513252733.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:53.223Z,1513252733.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:53.270Z,1513252733.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:53.594Z,1513252733.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:53.626Z,1513252733.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:53.845Z,1513252733.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:54.005Z,1513252734.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:54.035Z,1513252734.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:54.417Z,1513252734.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:54.435Z,1513252734.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:54.644Z,1513252734.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:54.806Z,1513252734.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:54.852Z,1513252734.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:55.059Z,1513252735.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:55.196Z,1513252735.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:55.227Z,1513252735.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:55.595Z,1513252735.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:55.609Z,1513252735.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:55.853Z,1513252735.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:56.014Z,1513252736.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:56.039Z,1513252736.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:56.414Z,1513252736.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:56.451Z,1513252736.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:56.649Z,1513252736.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:56.813Z,1513252736.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:56.838Z,1513252736.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:57.053Z,1513252737.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:57.203Z,1513252737.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:57.217Z,1513252737.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:57.599Z,1513252737.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:57.619Z,1513252737.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:57.849Z,1513252737.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:58.013Z,1513252738.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:58.047Z,1513252738.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:58.414Z,1513252738.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:58.446Z,1513252738.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:58.645Z,1513252738.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:58.818Z,1513252738.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:58.845Z,1513252738.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:59.049Z,1513252739.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:59.206Z,1513252739.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:59.221Z,1513252739.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:59.641Z,1513252739.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:58:59.694Z,1513252739.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:58:59.845Z,1513252739.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:00.018Z,1513252740.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:00.048Z,1513252740.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:00.410Z,1513252740.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:00.427Z,1513252740.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:00.642Z,1513252740.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:00.806Z,1513252740.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:00.821Z,1513252740.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:01.045Z,1513252741.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:01.204Z,1513252741.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:01.219Z,1513252741.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:01.605Z,1513252741.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:01.619Z,1513252741.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:01.841Z,1513252741.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:02.017Z,1513252742.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:02.032Z,1513252742.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:02.426Z,1513252742.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:02.456Z,1513252742.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:02.641Z,1513252742.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:02.880Z,1513252742.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:02.920Z,1513252742.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:03.053Z,1513252743.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:03.850Z,1513252743.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:04.646Z,1513252744.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:05.049Z,1513252745.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:05.846Z,1513252745.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:06.221Z,1513252746.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:06.283Z,1513252746.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:06.380Z,1513252746.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:06.418Z,1513252746.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:06.643Z,1513252746.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:06.781Z,1513252746.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:06.812Z,1513252746.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:07.049Z,1513252747.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:07.170Z,1513252747.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:07.223Z,1513252747.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:07.564Z,1513252747.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:07.579Z,1513252747.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:07.845Z,1513252747.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:07.962Z,1513252747.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:07.976Z,1513252747.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:08.364Z,1513252748.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:08.418Z,1513252748.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:08.645Z,1513252748.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:08.759Z,1513252748.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:08.782Z,1513252748.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:09.049Z,1513252749.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:09.167Z,1513252749.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:09.248Z,1513252749.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:09.567Z,1513252749.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:09.584Z,1513252749.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:09.845Z,1513252749.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:09.966Z,1513252749.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:09.982Z,1513252749.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:10.360Z,1513252750.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:10.375Z,1513252750.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:10.646Z,1513252750.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:10.767Z,1513252750.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:10.788Z,1513252750.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:11.049Z,1513252751.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:11.166Z,1513252751.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:11.181Z,1513252751.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:11.561Z,1513252751.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:11.576Z,1513252751.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:11.845Z,1513252751.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:11.959Z,1513252751.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:11.974Z,1513252751.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:12.390Z,1513252752.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:12.441Z,1513252752.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:12.641Z,1513252752.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:12.771Z,1513252752.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:12.786Z,1513252752.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:13.048Z,1513252753.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:13.172Z,1513252753.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:13.191Z,1513252753.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:13.567Z,1513252753.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:13.587Z,1513252753.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:13.843Z,1513252753.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:13.964Z,1513252753.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:13.978Z,1513252753.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:14.361Z,1513252754.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:14.376Z,1513252754.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:14.637Z,1513252754.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:14.758Z,1513252754.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:14.778Z,1513252754.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:15.041Z,1513252755.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:15.171Z,1513252755.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:15.191Z,1513252755.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:15.568Z,1513252755.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:15.624Z,1513252755.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:15.648Z,1513252755.648 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T11:59:15.838Z,1513252755.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:15.971Z,1513252755.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:15.986Z,1513252755.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:16.351Z,1513252756.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:16.376Z,1513252756.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:16.633Z,1513252756.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:16.751Z,1513252756.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:16.778Z,1513252756.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:17.038Z,1513252757.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:17.151Z,1513252757.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:17.183Z,1513252757.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:17.552Z,1513252757.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:17.604Z,1513252757.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:17.833Z,1513252757.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:17.952Z,1513252757.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:17.979Z,1513252757.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:18.400Z,1513252758.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:18.424Z,1513252758.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:18.629Z,1513252758.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:18.790Z,1513252758.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:18.820Z,1513252758.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:19.034Z,1513252759.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:19.170Z,1513252759.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:19.191Z,1513252759.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:19.555Z,1513252759.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:19.580Z,1513252759.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:19.830Z,1513252759.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:19.952Z,1513252759.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:19.983Z,1513252759.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:20.356Z,1513252760.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:20.383Z,1513252760.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:20.629Z,1513252760.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:20.751Z,1513252760.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:20.777Z,1513252760.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:21.037Z,1513252761.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:21.165Z,1513252761.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:21.184Z,1513252761.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:21.565Z,1513252761.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:21.589Z,1513252761.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:21.833Z,1513252761.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:21.980Z,1513252761.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:22.007Z,1513252762.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:22.357Z,1513252762.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:22.390Z,1513252762.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:22.631Z,1513252762.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:22.756Z,1513252762.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:22.771Z,1513252762.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:23.041Z,1513252763.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:23.155Z,1513252763.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:23.172Z,1513252763.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:23.556Z,1513252763.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:23.570Z,1513252763.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:23.837Z,1513252763.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:23.959Z,1513252763.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:23.973Z,1513252763.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:24.015Z,1513252764.015 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T11:59:24.015Z,1513252764.015 [DropWeight] No Fault, FailCount= 1
2017-12-14T11:59:24.370Z,1513252764.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:24.401Z,1513252764.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:24.633Z,1513252764.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:24.778Z,1513252764.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:24.808Z,1513252764.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:25.038Z,1513252765.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:25.199Z,1513252765.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:25.227Z,1513252765.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:25.560Z,1513252765.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:25.575Z,1513252765.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:25.833Z,1513252765.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:25.958Z,1513252765.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:25.981Z,1513252765.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:26.366Z,1513252766.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:26.381Z,1513252766.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:26.629Z,1513252766.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:26.773Z,1513252766.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:26.788Z,1513252766.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:27.034Z,1513252767.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:27.170Z,1513252767.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:27.215Z,1513252767.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:27.574Z,1513252767.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:27.588Z,1513252767.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:27.829Z,1513252767.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:27.973Z,1513252767.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:28.034Z,1513252768.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:28.383Z,1513252768.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:28.402Z,1513252768.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:28.626Z,1513252768.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:28.752Z,1513252768.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:28.788Z,1513252768.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:29.037Z,1513252769.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:29.152Z,1513252769.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:29.188Z,1513252769.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:29.553Z,1513252769.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:29.618Z,1513252769.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:29.833Z,1513252769.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:29.945Z,1513252769.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:29.959Z,1513252769.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:30.362Z,1513252770.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:30.395Z,1513252770.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:30.629Z,1513252770.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:30.769Z,1513252770.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:30.826Z,1513252770.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:31.033Z,1513252771.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:31.175Z,1513252771.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:31.190Z,1513252771.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:31.607Z,1513252771.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:31.686Z,1513252771.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:31.830Z,1513252771.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:31.951Z,1513252771.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:31.988Z,1513252771.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:32.395Z,1513252772.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:32.438Z,1513252772.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:32.625Z,1513252772.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:32.752Z,1513252772.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:32.787Z,1513252772.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:33.029Z,1513252773.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:33.176Z,1513252773.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:33.191Z,1513252773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:33.573Z,1513252773.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:33.596Z,1513252773.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:33.825Z,1513252773.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:33.987Z,1513252773.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:34.007Z,1513252774.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:34.355Z,1513252774.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:34.388Z,1513252774.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:34.622Z,1513252774.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:34.794Z,1513252774.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:34.838Z,1513252774.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:35.030Z,1513252775.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:35.164Z,1513252775.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:35.188Z,1513252775.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:35.556Z,1513252775.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:35.589Z,1513252775.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:35.826Z,1513252775.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:35.950Z,1513252775.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:35.964Z,1513252775.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:36.369Z,1513252776.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:36.399Z,1513252776.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:36.629Z,1513252776.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:36.766Z,1513252776.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:36.793Z,1513252776.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:37.037Z,1513252777.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:37.165Z,1513252777.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:37.199Z,1513252777.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:37.555Z,1513252777.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:37.591Z,1513252777.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:37.834Z,1513252777.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:37.992Z,1513252777.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:38.040Z,1513252778.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:38.352Z,1513252778.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:38.366Z,1513252778.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:38.629Z,1513252778.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:38.764Z,1513252778.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:38.811Z,1513252778.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:39.033Z,1513252779.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:39.174Z,1513252779.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:39.204Z,1513252779.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:39.573Z,1513252779.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:39.605Z,1513252779.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:39.830Z,1513252779.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:39.974Z,1513252779.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:40.023Z,1513252780.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:40.363Z,1513252780.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:40.383Z,1513252780.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:40.626Z,1513252780.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:40.764Z,1513252780.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:40.783Z,1513252780.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:41.029Z,1513252781.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:41.185Z,1513252781.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:41.212Z,1513252781.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:41.551Z,1513252781.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:41.589Z,1513252781.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:41.825Z,1513252781.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:41.975Z,1513252781.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:41.991Z,1513252781.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:42.374Z,1513252782.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:42.390Z,1513252782.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:42.621Z,1513252782.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:42.783Z,1513252782.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:42.803Z,1513252782.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:43.027Z,1513252783.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:43.157Z,1513252783.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:43.197Z,1513252783.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:43.558Z,1513252783.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:43.587Z,1513252783.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:43.821Z,1513252783.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:43.953Z,1513252783.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:43.984Z,1513252783.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:44.397Z,1513252784.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:44.450Z,1513252784.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:44.620Z,1513252784.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:44.765Z,1513252784.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:44.792Z,1513252784.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:45.025Z,1513252785.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:45.163Z,1513252785.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:45.202Z,1513252785.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:45.557Z,1513252785.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:45.571Z,1513252785.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:45.821Z,1513252785.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:45.961Z,1513252785.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:46.007Z,1513252786.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:46.392Z,1513252786.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:46.423Z,1513252786.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:46.619Z,1513252786.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:46.754Z,1513252786.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:46.787Z,1513252786.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:47.025Z,1513252787.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:47.172Z,1513252787.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:47.191Z,1513252787.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:47.576Z,1513252787.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:47.608Z,1513252787.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:47.822Z,1513252787.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:47.977Z,1513252787.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:47.992Z,1513252787.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:48.353Z,1513252788.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:48.384Z,1513252788.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:48.619Z,1513252788.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:48.756Z,1513252788.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:48.779Z,1513252788.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:49.194Z,1513252789.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:49.246Z,1513252789.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:49.413Z,1513252789.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:49.552Z,1513252789.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:49.594Z,1513252789.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:49.819Z,1513252789.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:49.955Z,1513252789.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:49.982Z,1513252789.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:50.383Z,1513252790.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:50.399Z,1513252790.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:50.615Z,1513252790.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:50.778Z,1513252790.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:50.787Z,1513252790.787 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T11:59:50.787Z,1513252790.787 [BPC1] Data Fault, FailCount= 1
2017-12-14T11:59:50.787Z,1513252790.787 [BPC1](ERROR): Data Fault
2017-12-14T11:59:50.799Z,1513252790.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:50.849Z,1513252790.849 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T11:59:51.031Z,1513252791.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:51.190Z,1513252791.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:51.212Z,1513252791.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:51.556Z,1513252791.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:51.583Z,1513252791.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:51.825Z,1513252791.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:51.952Z,1513252791.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:51.971Z,1513252791.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:52.014Z,1513252792.014 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T11:59:52.014Z,1513252792.014 [BPC1] No Fault, FailCount= 1
2017-12-14T11:59:52.356Z,1513252792.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:52.442Z,1513252792.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:52.622Z,1513252792.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:52.758Z,1513252792.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:52.773Z,1513252792.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:53.025Z,1513252793.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:53.170Z,1513252793.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:53.200Z,1513252793.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:53.570Z,1513252793.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:53.601Z,1513252793.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:53.821Z,1513252793.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:53.999Z,1513252793.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:54.064Z,1513252794.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:54.360Z,1513252794.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:54.375Z,1513252794.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:54.619Z,1513252794.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:54.754Z,1513252794.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:54.777Z,1513252794.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:55.025Z,1513252795.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:55.169Z,1513252795.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:55.184Z,1513252795.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:55.561Z,1513252795.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:55.584Z,1513252795.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:55.821Z,1513252795.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:55.964Z,1513252795.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:55.987Z,1513252795.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:56.373Z,1513252796.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:56.389Z,1513252796.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:56.617Z,1513252796.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:56.769Z,1513252796.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:56.792Z,1513252796.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:57.021Z,1513252797.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:57.178Z,1513252797.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:57.226Z,1513252797.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:57.551Z,1513252797.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:57.582Z,1513252797.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:57.818Z,1513252797.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:57.950Z,1513252797.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:57.981Z,1513252797.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:58.352Z,1513252798.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:58.368Z,1513252798.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:58.613Z,1513252798.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:58.764Z,1513252798.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:58.798Z,1513252798.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:59.017Z,1513252799.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:59.162Z,1513252799.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:59.195Z,1513252799.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:59.569Z,1513252799.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:59.594Z,1513252799.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T11:59:59.814Z,1513252799.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:59.968Z,1513252799.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T11:59:59.996Z,1513252799.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:00.420Z,1513252800.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:00.495Z,1513252800.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:00.610Z,1513252800.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:00.757Z,1513252800.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:00.772Z,1513252800.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:01.014Z,1513252801.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:01.158Z,1513252801.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:01.172Z,1513252801.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:01.558Z,1513252801.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:01.573Z,1513252801.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:01.810Z,1513252801.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:01.960Z,1513252801.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:01.988Z,1513252801.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:02.369Z,1513252802.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:02.384Z,1513252802.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:02.607Z,1513252802.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:02.766Z,1513252802.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:02.787Z,1513252802.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:03.033Z,1513252803.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:03.166Z,1513252803.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:03.187Z,1513252803.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:03.831Z,1513252803.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:04.630Z,1513252804.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:05.137Z,1513252805.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:05.933Z,1513252805.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:06.699Z,1513252806.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:06.709Z,1513252806.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:06.717Z,1513252806.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:06.841Z,1513252806.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:06.875Z,1513252806.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:07.182Z,1513252807.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:07.203Z,1513252807.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:07.507Z,1513252807.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:07.584Z,1513252807.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:07.600Z,1513252807.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:07.979Z,1513252807.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:08.002Z,1513252808.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:08.303Z,1513252808.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:08.371Z,1513252808.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:08.387Z,1513252808.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:08.712Z,1513252808.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:08.774Z,1513252808.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:08.797Z,1513252808.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:09.176Z,1513252809.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:09.195Z,1513252809.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:09.505Z,1513252809.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:09.564Z,1513252809.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:09.591Z,1513252809.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:09.963Z,1513252809.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:10.012Z,1513252810.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:10.304Z,1513252810.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:10.390Z,1513252810.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:10.411Z,1513252810.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:10.709Z,1513252810.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:10.786Z,1513252810.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:10.801Z,1513252810.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:11.186Z,1513252811.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:11.202Z,1513252811.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:11.505Z,1513252811.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:11.564Z,1513252811.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:11.599Z,1513252811.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:11.963Z,1513252811.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:11.995Z,1513252811.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:12.303Z,1513252812.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:12.368Z,1513252812.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:12.439Z,1513252812.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:12.709Z,1513252812.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:12.765Z,1513252812.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:12.796Z,1513252812.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:13.234Z,1513252813.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:13.287Z,1513252813.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:13.505Z,1513252813.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:13.572Z,1513252813.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:13.623Z,1513252813.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:13.986Z,1513252813.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:14.001Z,1513252814.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:14.303Z,1513252814.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:14.396Z,1513252814.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:14.443Z,1513252814.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:14.767Z,1513252814.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:14.771Z,1513252814.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:14.786Z,1513252814.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:15.172Z,1513252815.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:15.187Z,1513252815.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:15.562Z,1513252815.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:15.570Z,1513252815.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:15.586Z,1513252815.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:15.969Z,1513252815.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:15.984Z,1513252815.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:16.358Z,1513252816.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:16.392Z,1513252816.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:16.425Z,1513252816.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:16.785Z,1513252816.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:16.817Z,1513252816.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:16.817Z,1513252816.817 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 229
2017-12-14T12:00:16.817Z,1513252816.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:00:16.819Z,1513252816.819 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:16.819Z,1513252816.819 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 229
2017-12-14T12:00:16.819Z,1513252816.819 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:00:16.822Z,1513252816.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:16.822Z,1513252816.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 229
2017-12-14T12:00:16.822Z,1513252816.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:00:16.834Z,1513252816.834 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:00:16.834Z,1513252816.834 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:00:16.835Z,1513252816.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:00:17.037Z,1513252817.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:17.178Z,1513252817.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:17.236Z,1513252817.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:00:17.236Z,1513252817.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 229
2017-12-14T12:00:17.236Z,1513252817.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:00:17.236Z,1513252817.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 229
2017-12-14T12:00:17.237Z,1513252817.237 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:00:17.237Z,1513252817.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 229
2017-12-14T12:00:17.571Z,1513252817.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:17.590Z,1513252817.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:00:17.590Z,1513252817.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:00:17.590Z,1513252817.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:00:17.591Z,1513252817.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:00:17.591Z,1513252817.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:00:17.592Z,1513252817.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:00:17.592Z,1513252817.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:00:17.592Z,1513252817.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:00:17.593Z,1513252817.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:00:17.836Z,1513252817.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:17.967Z,1513252817.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:17.998Z,1513252817.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:18.373Z,1513252818.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:18.388Z,1513252818.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:18.631Z,1513252818.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:18.782Z,1513252818.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:18.796Z,1513252818.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:19.041Z,1513252819.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:19.186Z,1513252819.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:19.201Z,1513252819.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:19.633Z,1513252819.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:19.690Z,1513252819.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:19.837Z,1513252819.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:19.986Z,1513252819.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:20.007Z,1513252820.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:20.382Z,1513252820.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:20.398Z,1513252820.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:20.633Z,1513252820.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:20.784Z,1513252820.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:20.799Z,1513252820.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:21.038Z,1513252821.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:21.174Z,1513252821.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:21.189Z,1513252821.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:21.568Z,1513252821.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:21.603Z,1513252821.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:21.833Z,1513252821.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:21.957Z,1513252821.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:21.986Z,1513252821.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:22.391Z,1513252822.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:22.411Z,1513252822.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:22.629Z,1513252822.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:22.797Z,1513252822.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:22.851Z,1513252822.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:23.034Z,1513252823.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:23.191Z,1513252823.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:23.206Z,1513252823.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:23.564Z,1513252823.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:23.592Z,1513252823.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:23.829Z,1513252823.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:23.968Z,1513252823.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:23.996Z,1513252823.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:24.366Z,1513252824.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:24.394Z,1513252824.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:24.627Z,1513252824.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:24.768Z,1513252824.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:24.805Z,1513252824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:25.037Z,1513252825.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:25.182Z,1513252825.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:25.214Z,1513252825.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:25.587Z,1513252825.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:25.602Z,1513252825.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:25.834Z,1513252825.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:26.016Z,1513252826.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:26.052Z,1513252826.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:26.368Z,1513252826.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:26.403Z,1513252826.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:26.629Z,1513252826.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:26.767Z,1513252826.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:26.812Z,1513252826.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:27.033Z,1513252827.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:27.164Z,1513252827.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:27.196Z,1513252827.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:27.564Z,1513252827.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:27.580Z,1513252827.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:27.831Z,1513252827.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:27.967Z,1513252827.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:27.982Z,1513252827.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:28.408Z,1513252828.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:28.423Z,1513252828.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:28.625Z,1513252828.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:28.782Z,1513252828.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:28.815Z,1513252828.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:29.029Z,1513252829.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:29.183Z,1513252829.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:29.254Z,1513252829.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:29.563Z,1513252829.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:29.590Z,1513252829.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:29.825Z,1513252829.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:29.968Z,1513252829.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:29.991Z,1513252829.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:30.374Z,1513252830.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:30.399Z,1513252830.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:30.627Z,1513252830.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:30.778Z,1513252830.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:30.792Z,1513252830.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:31.097Z,1513252831.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:31.179Z,1513252831.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:31.194Z,1513252831.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:31.577Z,1513252831.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:31.596Z,1513252831.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:31.893Z,1513252831.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:31.994Z,1513252831.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:32.026Z,1513252832.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:32.386Z,1513252832.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:32.411Z,1513252832.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:32.689Z,1513252832.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:32.790Z,1513252832.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:32.806Z,1513252832.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:33.093Z,1513252833.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:33.167Z,1513252833.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:33.198Z,1513252833.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:33.564Z,1513252833.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:33.579Z,1513252833.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:33.889Z,1513252833.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:33.975Z,1513252833.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:34.010Z,1513252834.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:34.378Z,1513252834.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:34.404Z,1513252834.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:34.687Z,1513252834.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:34.790Z,1513252834.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:34.850Z,1513252834.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:35.181Z,1513252835.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:35.224Z,1513252835.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:35.481Z,1513252835.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:35.613Z,1513252835.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:35.636Z,1513252835.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:35.971Z,1513252835.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:36.031Z,1513252836.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:36.279Z,1513252836.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:36.368Z,1513252836.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:36.403Z,1513252836.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:36.697Z,1513252836.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:36.772Z,1513252836.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:36.822Z,1513252836.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:37.185Z,1513252837.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:37.200Z,1513252837.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:37.493Z,1513252837.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:37.578Z,1513252837.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:37.592Z,1513252837.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:37.979Z,1513252837.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:37.993Z,1513252837.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:38.295Z,1513252838.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:38.374Z,1513252838.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:38.389Z,1513252838.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:38.708Z,1513252838.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:38.808Z,1513252838.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:38.882Z,1513252838.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:39.174Z,1513252839.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:39.188Z,1513252839.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:39.501Z,1513252839.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:39.574Z,1513252839.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:39.589Z,1513252839.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:39.975Z,1513252839.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:39.989Z,1513252839.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:40.299Z,1513252840.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:40.383Z,1513252840.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:40.397Z,1513252840.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:40.705Z,1513252840.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:40.777Z,1513252840.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:40.792Z,1513252840.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:41.178Z,1513252841.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:41.192Z,1513252841.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:41.501Z,1513252841.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:41.566Z,1513252841.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:41.589Z,1513252841.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:42.004Z,1513252842.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:42.039Z,1513252842.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:42.299Z,1513252842.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:42.395Z,1513252842.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:42.431Z,1513252842.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:42.771Z,1513252842.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:42.781Z,1513252842.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:42.794Z,1513252842.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:43.181Z,1513252843.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:43.196Z,1513252843.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:43.578Z,1513252843.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:43.582Z,1513252843.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:43.596Z,1513252843.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:43.978Z,1513252843.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:44.005Z,1513252844.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:44.370Z,1513252844.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:44.374Z,1513252844.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:44.398Z,1513252844.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:44.764Z,1513252844.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:44.799Z,1513252844.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:45.025Z,1513252845.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:45.189Z,1513252845.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:45.240Z,1513252845.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:45.568Z,1513252845.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:45.594Z,1513252845.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:45.825Z,1513252845.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:45.967Z,1513252845.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:45.995Z,1513252845.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:46.386Z,1513252846.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:46.401Z,1513252846.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:46.624Z,1513252846.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:46.789Z,1513252846.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:46.811Z,1513252846.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:47.049Z,1513252847.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:47.188Z,1513252847.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:47.203Z,1513252847.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:47.562Z,1513252847.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:47.595Z,1513252847.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:47.845Z,1513252847.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:47.964Z,1513252847.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:47.995Z,1513252847.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:48.401Z,1513252848.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:48.442Z,1513252848.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:48.641Z,1513252848.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:48.764Z,1513252848.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:48.778Z,1513252848.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:49.045Z,1513252849.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:49.181Z,1513252849.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:49.208Z,1513252849.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:49.581Z,1513252849.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:49.606Z,1513252849.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:49.842Z,1513252849.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:49.975Z,1513252849.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:50.005Z,1513252850.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:50.376Z,1513252850.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:50.408Z,1513252850.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:50.637Z,1513252850.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:50.775Z,1513252850.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:50.790Z,1513252850.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:51.041Z,1513252851.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:51.170Z,1513252851.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:51.185Z,1513252851.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:51.578Z,1513252851.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:51.623Z,1513252851.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:51.838Z,1513252851.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:51.972Z,1513252851.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:51.987Z,1513252851.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:52.386Z,1513252852.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:52.417Z,1513252852.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:52.634Z,1513252852.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:52.794Z,1513252852.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:52.823Z,1513252852.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:53.039Z,1513252853.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:53.185Z,1513252853.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:53.220Z,1513252853.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:53.570Z,1513252853.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:53.590Z,1513252853.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:53.833Z,1513252853.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:53.973Z,1513252853.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:53.988Z,1513252853.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:54.374Z,1513252854.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:54.389Z,1513252854.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:54.629Z,1513252854.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:54.823Z,1513252854.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:54.846Z,1513252854.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:55.034Z,1513252855.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:55.182Z,1513252855.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:55.196Z,1513252855.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:55.583Z,1513252855.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:55.603Z,1513252855.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:55.830Z,1513252855.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:55.982Z,1513252855.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:55.997Z,1513252855.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:56.389Z,1513252856.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:56.432Z,1513252856.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:56.627Z,1513252856.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:56.775Z,1513252856.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:56.796Z,1513252856.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:57.037Z,1513252857.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:57.170Z,1513252857.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:57.258Z,1513252857.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:57.564Z,1513252857.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:57.599Z,1513252857.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:57.835Z,1513252857.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:58.003Z,1513252858.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:58.058Z,1513252858.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:58.387Z,1513252858.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:58.402Z,1513252858.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:58.632Z,1513252858.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:58.791Z,1513252858.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:58.839Z,1513252858.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:59.041Z,1513252859.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:59.184Z,1513252859.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:59.220Z,1513252859.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:59.558Z,1513252859.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:59.572Z,1513252859.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:00:59.837Z,1513252859.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:59.963Z,1513252859.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:00:59.978Z,1513252859.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:00.364Z,1513252860.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:00.378Z,1513252860.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:00.635Z,1513252860.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:00.774Z,1513252860.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:00.788Z,1513252860.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:01.049Z,1513252861.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:01.232Z,1513252861.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:01.279Z,1513252861.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:01.577Z,1513252861.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:01.616Z,1513252861.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:01.845Z,1513252861.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:01.974Z,1513252861.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:01.991Z,1513252861.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:02.383Z,1513252862.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:02.416Z,1513252862.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:02.643Z,1513252862.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:02.773Z,1513252862.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:02.800Z,1513252862.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:03.049Z,1513252863.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:03.174Z,1513252863.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:03.195Z,1513252863.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:03.845Z,1513252863.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:04.641Z,1513252864.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:05.045Z,1513252865.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:05.842Z,1513252865.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:06.637Z,1513252866.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:06.762Z,1513252866.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:06.778Z,1513252866.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:06.876Z,1513252866.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:06.939Z,1513252866.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:07.041Z,1513252867.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:07.246Z,1513252867.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:07.276Z,1513252867.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:07.665Z,1513252867.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:07.702Z,1513252867.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:07.837Z,1513252867.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:08.046Z,1513252868.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:08.070Z,1513252868.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:08.439Z,1513252868.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:08.470Z,1513252868.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:08.633Z,1513252868.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:08.836Z,1513252868.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:08.851Z,1513252868.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:09.038Z,1513252869.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:09.239Z,1513252869.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:09.254Z,1513252869.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:09.637Z,1513252869.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:09.653Z,1513252869.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:09.833Z,1513252869.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:10.046Z,1513252870.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:10.060Z,1513252870.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:10.450Z,1513252870.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:10.480Z,1513252870.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:10.629Z,1513252870.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:10.850Z,1513252870.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:10.879Z,1513252870.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:11.034Z,1513252871.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:11.235Z,1513252871.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:11.250Z,1513252871.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:11.634Z,1513252871.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:11.648Z,1513252871.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:11.829Z,1513252871.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:12.035Z,1513252872.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:12.051Z,1513252872.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:12.438Z,1513252872.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:12.452Z,1513252872.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:12.628Z,1513252872.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:12.839Z,1513252872.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:12.854Z,1513252872.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:13.037Z,1513252873.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:13.238Z,1513252873.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:13.254Z,1513252873.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:13.650Z,1513252873.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:13.681Z,1513252873.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:13.835Z,1513252873.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:14.042Z,1513252874.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:14.058Z,1513252874.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:14.439Z,1513252874.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:14.454Z,1513252874.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:14.631Z,1513252874.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:14.848Z,1513252874.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:14.890Z,1513252874.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:15.037Z,1513252875.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:15.239Z,1513252875.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:15.254Z,1513252875.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:15.642Z,1513252875.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:15.657Z,1513252875.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:15.834Z,1513252875.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:16.049Z,1513252876.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:16.118Z,1513252876.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:16.447Z,1513252876.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:16.494Z,1513252876.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:16.630Z,1513252876.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:16.848Z,1513252876.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:16.897Z,1513252876.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:17.035Z,1513252877.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:17.229Z,1513252877.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:17.276Z,1513252877.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:17.659Z,1513252877.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:17.687Z,1513252877.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:17.830Z,1513252877.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:18.066Z,1513252878.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:18.085Z,1513252878.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:18.451Z,1513252878.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:18.475Z,1513252878.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:18.626Z,1513252878.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:18.849Z,1513252878.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:18.928Z,1513252878.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:19.031Z,1513252879.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:19.237Z,1513252879.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:19.314Z,1513252879.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:19.642Z,1513252879.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:19.705Z,1513252879.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:19.826Z,1513252879.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:20.053Z,1513252880.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:20.072Z,1513252880.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:20.453Z,1513252880.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:20.510Z,1513252880.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:20.622Z,1513252880.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:20.854Z,1513252880.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:20.906Z,1513252880.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:21.029Z,1513252881.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:21.230Z,1513252881.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:21.314Z,1513252881.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:21.635Z,1513252881.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:21.655Z,1513252881.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:21.827Z,1513252881.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:22.049Z,1513252882.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:22.063Z,1513252882.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:22.452Z,1513252882.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:22.486Z,1513252882.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:22.623Z,1513252882.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:22.848Z,1513252882.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:22.875Z,1513252882.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:23.032Z,1513252883.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:23.240Z,1513252883.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:23.254Z,1513252883.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:23.627Z,1513252883.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:23.659Z,1513252883.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:23.827Z,1513252883.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:24.059Z,1513252884.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:24.074Z,1513252884.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:24.450Z,1513252884.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:24.464Z,1513252884.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:24.621Z,1513252884.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:24.866Z,1513252884.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:24.888Z,1513252884.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:25.025Z,1513252885.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:25.235Z,1513252885.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:25.284Z,1513252885.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:25.627Z,1513252885.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:25.666Z,1513252885.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:25.824Z,1513252885.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:26.057Z,1513252886.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:26.072Z,1513252886.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:26.427Z,1513252886.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:26.484Z,1513252886.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:26.641Z,1513252886.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:26.844Z,1513252886.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:26.968Z,1513252886.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:27.073Z,1513252887.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:27.268Z,1513252887.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:27.294Z,1513252887.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:27.652Z,1513252887.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:27.684Z,1513252887.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:27.870Z,1513252887.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:28.050Z,1513252888.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:28.102Z,1513252888.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:28.433Z,1513252888.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:28.472Z,1513252888.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:28.666Z,1513252888.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:28.845Z,1513252888.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:28.890Z,1513252888.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:29.070Z,1513252889.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:29.249Z,1513252889.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:29.292Z,1513252889.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:29.637Z,1513252889.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:29.695Z,1513252889.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:29.867Z,1513252889.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:30.039Z,1513252890.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:30.058Z,1513252890.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:30.443Z,1513252890.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:30.484Z,1513252890.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:30.662Z,1513252890.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:30.841Z,1513252890.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:30.856Z,1513252890.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:31.066Z,1513252891.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:31.250Z,1513252891.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:31.344Z,1513252891.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:31.638Z,1513252891.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:31.664Z,1513252891.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:31.862Z,1513252891.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:32.048Z,1513252892.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:32.085Z,1513252892.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:32.452Z,1513252892.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:32.467Z,1513252892.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:32.658Z,1513252892.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:32.856Z,1513252892.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:32.913Z,1513252892.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:33.062Z,1513252893.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:33.230Z,1513252893.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:33.269Z,1513252893.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:33.661Z,1513252893.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:33.693Z,1513252893.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:33.858Z,1513252893.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:34.070Z,1513252894.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:34.104Z,1513252894.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:34.448Z,1513252894.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:34.479Z,1513252894.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:34.654Z,1513252894.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:34.852Z,1513252894.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:34.883Z,1513252894.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:35.058Z,1513252895.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:35.235Z,1513252895.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:35.255Z,1513252895.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:35.639Z,1513252895.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:35.682Z,1513252895.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:35.855Z,1513252895.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:36.036Z,1513252896.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:36.087Z,1513252896.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:36.450Z,1513252896.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:36.501Z,1513252896.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:36.650Z,1513252896.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:36.877Z,1513252896.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:36.955Z,1513252896.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:37.054Z,1513252897.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:37.274Z,1513252897.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:37.301Z,1513252897.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:37.652Z,1513252897.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:37.668Z,1513252897.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:37.849Z,1513252897.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:38.047Z,1513252898.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:38.071Z,1513252898.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:38.428Z,1513252898.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:38.463Z,1513252898.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:38.646Z,1513252898.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:38.829Z,1513252898.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:38.869Z,1513252898.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:39.230Z,1513252899.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:39.261Z,1513252899.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:39.443Z,1513252899.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:39.629Z,1513252899.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:39.666Z,1513252899.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:40.045Z,1513252900.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:40.064Z,1513252900.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:40.238Z,1513252900.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:40.443Z,1513252900.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:40.472Z,1513252900.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:40.839Z,1513252900.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:40.863Z,1513252900.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:41.035Z,1513252901.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:41.230Z,1513252901.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:41.255Z,1513252901.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:41.629Z,1513252901.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:41.711Z,1513252901.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:41.830Z,1513252901.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:42.059Z,1513252902.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:42.087Z,1513252902.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:42.445Z,1513252902.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:42.491Z,1513252902.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:42.627Z,1513252902.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:42.840Z,1513252902.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:42.871Z,1513252902.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:43.229Z,1513252903.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:43.315Z,1513252903.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:43.423Z,1513252903.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:43.648Z,1513252903.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:43.714Z,1513252903.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:44.037Z,1513252904.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:44.201Z,1513252904.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:44.217Z,1513252904.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:44.445Z,1513252904.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:44.459Z,1513252904.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:44.842Z,1513252904.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:44.856Z,1513252904.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:45.015Z,1513252905.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:45.232Z,1513252905.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:45.255Z,1513252905.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:45.630Z,1513252905.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:45.645Z,1513252905.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:45.809Z,1513252905.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:46.090Z,1513252906.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:46.104Z,1513252906.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:46.441Z,1513252906.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:46.456Z,1513252906.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:46.606Z,1513252906.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:46.837Z,1513252906.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:46.852Z,1513252906.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:47.227Z,1513252907.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:47.242Z,1513252907.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:47.401Z,1513252907.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:47.630Z,1513252907.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:47.645Z,1513252907.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:48.046Z,1513252908.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:48.060Z,1513252908.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:48.197Z,1513252908.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:48.441Z,1513252908.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:48.456Z,1513252908.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:48.842Z,1513252908.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:48.856Z,1513252908.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:48.993Z,1513252908.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:49.230Z,1513252909.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:49.244Z,1513252909.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:49.641Z,1513252909.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:49.656Z,1513252909.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:49.789Z,1513252909.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:50.039Z,1513252910.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:50.054Z,1513252910.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:50.443Z,1513252910.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:50.458Z,1513252910.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:50.585Z,1513252910.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:50.834Z,1513252910.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:50.850Z,1513252910.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:51.230Z,1513252911.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:51.246Z,1513252911.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:51.381Z,1513252911.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:51.627Z,1513252911.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:51.675Z,1513252911.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:52.046Z,1513252912.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:52.062Z,1513252912.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:52.177Z,1513252912.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:52.441Z,1513252912.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:52.458Z,1513252912.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:52.848Z,1513252912.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:52.890Z,1513252912.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:52.973Z,1513252912.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:53.227Z,1513252913.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:53.242Z,1513252913.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:53.632Z,1513252913.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:53.651Z,1513252913.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:53.770Z,1513252913.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:54.042Z,1513252914.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:54.056Z,1513252914.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:54.442Z,1513252914.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:54.457Z,1513252914.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:54.565Z,1513252914.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:54.842Z,1513252914.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:54.857Z,1513252914.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:55.228Z,1513252915.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:55.243Z,1513252915.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:55.361Z,1513252915.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:55.620Z,1513252915.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:55.635Z,1513252915.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:56.040Z,1513252916.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:56.068Z,1513252916.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:56.158Z,1513252916.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:56.445Z,1513252916.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:56.467Z,1513252916.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:56.841Z,1513252916.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:56.856Z,1513252916.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:56.953Z,1513252916.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:57.232Z,1513252917.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:57.247Z,1513252917.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:57.629Z,1513252917.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:57.644Z,1513252917.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:57.749Z,1513252917.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:58.042Z,1513252918.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:58.057Z,1513252918.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:58.445Z,1513252918.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:58.461Z,1513252918.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:58.545Z,1513252918.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:58.841Z,1513252918.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:58.863Z,1513252918.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:59.229Z,1513252919.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:59.244Z,1513252919.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:01:59.341Z,1513252919.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:59.631Z,1513252919.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:01:59.651Z,1513252919.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:00.041Z,1513252920.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:00.056Z,1513252920.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:00.137Z,1513252920.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:00.446Z,1513252920.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:00.461Z,1513252920.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:00.842Z,1513252920.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:00.857Z,1513252920.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:00.934Z,1513252920.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:01.228Z,1513252921.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:01.250Z,1513252921.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:01.627Z,1513252921.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:01.666Z,1513252921.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:01.729Z,1513252921.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.042Z,1513252922.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.067Z,1513252922.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:02.133Z,1513252922.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.443Z,1513252922.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.479Z,1513252922.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:02.538Z,1513252922.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.843Z,1513252922.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:02.886Z,1513252922.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:02.942Z,1513252922.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:03.230Z,1513252923.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:03.257Z,1513252923.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:03.346Z,1513252923.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:04.141Z,1513252924.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:04.937Z,1513252924.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:05.345Z,1513252925.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:05.749Z,1513252925.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:06.153Z,1513252926.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:06.557Z,1513252926.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:06.962Z,1513252926.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:07.365Z,1513252927.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:07.769Z,1513252927.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:08.173Z,1513252928.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:08.577Z,1513252928.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:08.898Z,1513252928.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:08.907Z,1513252928.907 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:02:08.907Z,1513252928.907 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:02:08.907Z,1513252928.907 [BPC1](ERROR): Communications Fault
2017-12-14T12:02:08.947Z,1513252928.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:08.981Z,1513252928.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:08.986Z,1513252928.986 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:02:09.067Z,1513252929.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:09.096Z,1513252929.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:09.385Z,1513252929.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:09.450Z,1513252929.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:09.477Z,1513252929.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:09.798Z,1513252929.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:09.855Z,1513252929.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:09.883Z,1513252929.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:09.913Z,1513252929.913 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:02:09.913Z,1513252929.913 [BPC1] No Fault, FailCount= 1
2017-12-14T12:02:10.224Z,1513252930.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:10.311Z,1513252930.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:10.595Z,1513252930.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:10.675Z,1513252930.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:10.714Z,1513252930.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:11.025Z,1513252931.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:11.057Z,1513252931.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:11.089Z,1513252931.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:11.424Z,1513252931.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:11.464Z,1513252931.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:11.821Z,1513252931.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:11.857Z,1513252931.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:12.235Z,1513252932.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:12.317Z,1513252932.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:12.634Z,1513252932.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:12.658Z,1513252932.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:13.041Z,1513252933.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:13.058Z,1513252933.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:13.440Z,1513252933.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:13.454Z,1513252933.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:13.822Z,1513252933.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:13.858Z,1513252933.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:14.235Z,1513252934.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:14.321Z,1513252934.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:14.620Z,1513252934.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:14.659Z,1513252934.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:15.050Z,1513252935.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:15.065Z,1513252935.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:15.444Z,1513252935.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:15.460Z,1513252935.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:15.873Z,1513252935.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:15.893Z,1513252935.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:16.224Z,1513252936.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:16.328Z,1513252936.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:16.629Z,1513252936.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:16.656Z,1513252936.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:17.042Z,1513252937.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:17.063Z,1513252937.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:17.442Z,1513252937.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:17.463Z,1513252937.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:17.848Z,1513252937.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:17.864Z,1513252937.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:18.237Z,1513252938.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:18.320Z,1513252938.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:18.620Z,1513252938.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:18.701Z,1513252938.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:19.072Z,1513252939.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:19.121Z,1513252939.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:19.461Z,1513252939.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:19.475Z,1513252939.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:19.847Z,1513252939.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:19.862Z,1513252939.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:20.228Z,1513252940.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:20.253Z,1513252940.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:20.631Z,1513252940.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:20.658Z,1513252940.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:21.039Z,1513252941.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:21.064Z,1513252941.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:21.447Z,1513252941.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:21.462Z,1513252941.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:21.845Z,1513252941.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:21.868Z,1513252941.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:22.240Z,1513252942.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:22.299Z,1513252942.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:22.699Z,1513252942.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:22.723Z,1513252942.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:23.046Z,1513252943.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:23.060Z,1513252943.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:23.438Z,1513252943.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:23.467Z,1513252943.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:23.850Z,1513252943.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:23.871Z,1513252943.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:24.224Z,1513252944.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:24.258Z,1513252944.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:24.700Z,1513252944.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:24.780Z,1513252944.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:25.038Z,1513252945.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:25.067Z,1513252945.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:25.463Z,1513252945.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:25.522Z,1513252945.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:25.854Z,1513252945.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:25.870Z,1513252945.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:26.229Z,1513252946.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:26.287Z,1513252946.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:26.625Z,1513252946.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:26.651Z,1513252946.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:27.047Z,1513252947.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:27.078Z,1513252947.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:27.442Z,1513252947.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:27.458Z,1513252947.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:27.842Z,1513252947.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:27.857Z,1513252947.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:28.229Z,1513252948.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:28.315Z,1513252948.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:28.628Z,1513252948.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:28.659Z,1513252948.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:29.029Z,1513252949.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:29.056Z,1513252949.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:29.439Z,1513252949.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:29.464Z,1513252949.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:29.839Z,1513252949.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:29.867Z,1513252949.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:30.235Z,1513252950.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:30.362Z,1513252950.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:30.616Z,1513252950.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:30.690Z,1513252950.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:31.050Z,1513252951.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:31.066Z,1513252951.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:31.446Z,1513252951.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:31.499Z,1513252951.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:31.866Z,1513252951.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:31.907Z,1513252951.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:32.220Z,1513252952.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:32.315Z,1513252952.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:32.624Z,1513252952.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:32.655Z,1513252952.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:33.035Z,1513252953.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:33.071Z,1513252953.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:33.449Z,1513252953.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:33.464Z,1513252953.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:33.849Z,1513252953.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:33.863Z,1513252953.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:34.233Z,1513252954.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:34.263Z,1513252954.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:34.635Z,1513252954.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:34.653Z,1513252954.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:35.074Z,1513252955.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:35.125Z,1513252955.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:35.436Z,1513252955.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:35.455Z,1513252955.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:35.842Z,1513252955.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:35.904Z,1513252955.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:36.234Z,1513252956.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:36.248Z,1513252956.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:36.676Z,1513252956.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:36.708Z,1513252956.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:37.042Z,1513252957.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:37.057Z,1513252957.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:37.447Z,1513252957.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:37.463Z,1513252957.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:37.836Z,1513252957.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:37.859Z,1513252957.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:38.255Z,1513252958.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:38.295Z,1513252958.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:38.687Z,1513252958.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:38.710Z,1513252958.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:39.042Z,1513252959.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:39.056Z,1513252959.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:39.445Z,1513252959.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:39.460Z,1513252959.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:39.847Z,1513252959.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:39.861Z,1513252959.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:40.225Z,1513252960.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:40.368Z,1513252960.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:40.628Z,1513252960.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:40.661Z,1513252960.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:41.041Z,1513252961.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:41.079Z,1513252961.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:41.463Z,1513252961.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:41.491Z,1513252961.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:41.835Z,1513252961.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:41.855Z,1513252961.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:42.238Z,1513252962.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:42.407Z,1513252962.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:42.614Z,1513252962.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:42.649Z,1513252962.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:43.043Z,1513252963.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:43.058Z,1513252963.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:43.452Z,1513252963.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:43.467Z,1513252963.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:43.834Z,1513252963.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:43.857Z,1513252963.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:44.231Z,1513252964.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:44.327Z,1513252964.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:44.658Z,1513252964.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:44.685Z,1513252964.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:45.046Z,1513252965.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:45.076Z,1513252965.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:45.448Z,1513252965.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:45.546Z,1513252965.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:45.837Z,1513252965.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:45.871Z,1513252965.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:46.234Z,1513252966.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:46.308Z,1513252966.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:46.620Z,1513252966.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:46.656Z,1513252966.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:47.054Z,1513252967.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:47.085Z,1513252967.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:47.448Z,1513252967.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:47.464Z,1513252967.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:47.846Z,1513252967.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:47.870Z,1513252967.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:48.219Z,1513252968.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:48.264Z,1513252968.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:48.640Z,1513252968.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:48.668Z,1513252968.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:49.042Z,1513252969.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:49.072Z,1513252969.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:49.449Z,1513252969.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:49.464Z,1513252969.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:49.842Z,1513252969.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:49.862Z,1513252969.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:49.875Z,1513252969.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:50.229Z,1513252970.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:50.264Z,1513252970.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:50.658Z,1513252970.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:50.681Z,1513252970.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:50.725Z,1513252970.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:51.054Z,1513252971.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:51.069Z,1513252971.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:51.084Z,1513252971.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:51.445Z,1513252971.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:51.468Z,1513252971.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:51.851Z,1513252971.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:51.867Z,1513252971.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:52.233Z,1513252972.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:52.318Z,1513252972.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:52.675Z,1513252972.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:52.742Z,1513252972.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:53.035Z,1513252973.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:53.055Z,1513252973.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:53.440Z,1513252973.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:53.499Z,1513252973.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:53.840Z,1513252973.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:53.855Z,1513252973.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:54.310Z,1513252974.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:54.379Z,1513252974.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:54.625Z,1513252974.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:54.670Z,1513252974.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:55.042Z,1513252975.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:55.064Z,1513252975.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:55.438Z,1513252975.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:55.462Z,1513252975.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:55.837Z,1513252975.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:55.863Z,1513252975.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:56.225Z,1513252976.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:56.325Z,1513252976.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:56.620Z,1513252976.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:56.653Z,1513252976.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:57.041Z,1513252977.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:57.061Z,1513252977.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:57.442Z,1513252977.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:57.456Z,1513252977.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:57.848Z,1513252977.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:57.867Z,1513252977.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:58.225Z,1513252978.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:58.324Z,1513252978.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:58.625Z,1513252978.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:58.653Z,1513252978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:59.059Z,1513252979.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:59.079Z,1513252979.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:59.427Z,1513252979.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:59.463Z,1513252979.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:02:59.848Z,1513252979.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:02:59.863Z,1513252979.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:00.228Z,1513252980.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:00.319Z,1513252980.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:00.642Z,1513252980.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:00.685Z,1513252980.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:01.051Z,1513252981.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:01.066Z,1513252981.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:01.453Z,1513252981.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:01.468Z,1513252981.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:01.834Z,1513252981.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:01.855Z,1513252981.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:02.225Z,1513252982.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:02.250Z,1513252982.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:02.623Z,1513252982.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:02.683Z,1513252982.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:02.687Z,1513252982.687 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:03:02.687Z,1513252982.687 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:03:02.687Z,1513252982.687 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:03:02.687Z,1513252982.687 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:03:03.038Z,1513252983.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:03.064Z,1513252983.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:03.067Z,1513252983.067 [Default:CheckIn:D] Stopped
2017-12-14T12:03:03.067Z,1513252983.067 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:03:03.438Z,1513252983.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:03.460Z,1513252983.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:03.464Z,1513252983.464 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 689.794596 min 
2017-12-14T12:03:03.464Z,1513252983.464 [Default:CheckIn:E] Stopped
2017-12-14T12:03:03.464Z,1513252983.464 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:03:03.464Z,1513252983.464 [Default:CheckIn] Stopped
2017-12-14T12:03:03.465Z,1513252983.465 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:03:03.465Z,1513252983.465 [Default:CheckIn](INFO): Running loop #67
2017-12-14T12:03:03.465Z,1513252983.465 [Default:CheckIn] Running Loop=67
2017-12-14T12:03:03.465Z,1513252983.465 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:03:03.465Z,1513252983.465 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:03:06.985Z,1513252986.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:07.000Z,1513252987.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:07.114Z,1513252987.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:07.150Z,1513252987.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:07.482Z,1513252987.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:07.503Z,1513252987.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:07.890Z,1513252987.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:07.904Z,1513252987.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:08.347Z,1513252988.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:08.371Z,1513252988.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:08.694Z,1513252988.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:08.709Z,1513252988.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:09.101Z,1513252989.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:09.123Z,1513252989.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:09.488Z,1513252989.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:09.519Z,1513252989.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:09.899Z,1513252989.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:09.919Z,1513252989.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:10.390Z,1513252990.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:10.418Z,1513252990.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:10.676Z,1513252990.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:10.707Z,1513252990.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:11.079Z,1513252991.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:11.110Z,1513252991.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:11.483Z,1513252991.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:11.518Z,1513252991.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:11.875Z,1513252991.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:11.890Z,1513252991.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:12.352Z,1513252992.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:12.386Z,1513252992.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:12.694Z,1513252992.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:12.722Z,1513252992.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:13.097Z,1513252993.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:13.119Z,1513252993.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:13.488Z,1513252993.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:13.511Z,1513252993.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:13.880Z,1513252993.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:13.908Z,1513252993.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:14.356Z,1513252994.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:14.375Z,1513252994.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:14.700Z,1513252994.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:14.779Z,1513252994.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:15.059Z,1513252995.059 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:03:15.059Z,1513252995.059 [NAL9602] Data Fault, FailCount= 3
2017-12-14T12:03:15.059Z,1513252995.059 [NAL9602](ERROR): Data Fault
2017-12-14T12:03:15.076Z,1513252995.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:15.121Z,1513252995.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:15.150Z,1513252995.150 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:03:15.462Z,1513252995.462 [NAL9602](INFO): Powering down
2017-12-14T12:03:15.480Z,1513252995.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:15.522Z,1513252995.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:15.882Z,1513252995.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:15.923Z,1513252995.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:16.282Z,1513252996.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:16.364Z,1513252996.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:16.409Z,1513252996.409 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:03:16.409Z,1513252996.409 [NAL9602] No Fault, FailCount= 3
2017-12-14T12:03:16.690Z,1513252996.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:16.758Z,1513252996.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.086Z,1513252997.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:17.115Z,1513252997.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.474Z,1513252997.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:17.509Z,1513252997.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.869Z,1513252997.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:17.884Z,1513252997.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.884Z,1513252997.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 230
2017-12-14T12:03:17.884Z,1513252997.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:03:17.886Z,1513252997.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.886Z,1513252997.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 230
2017-12-14T12:03:17.886Z,1513252997.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:03:17.888Z,1513252997.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:17.888Z,1513252997.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 230
2017-12-14T12:03:17.888Z,1513252997.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:03:17.916Z,1513252997.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:03:17.916Z,1513252997.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:03:17.921Z,1513252997.921 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:03:18.286Z,1513252998.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:18.325Z,1513252998.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:03:18.325Z,1513252998.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 230
2017-12-14T12:03:18.325Z,1513252998.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:03:18.325Z,1513252998.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 230
2017-12-14T12:03:18.326Z,1513252998.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:03:18.326Z,1513252998.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 230
2017-12-14T12:03:18.679Z,1513252998.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:18.716Z,1513252998.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:03:18.728Z,1513252998.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:03:18.728Z,1513252998.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:03:18.747Z,1513252998.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:03:18.748Z,1513252998.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:03:18.748Z,1513252998.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:03:18.748Z,1513252998.748 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:03:18.761Z,1513252998.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:03:18.762Z,1513252998.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:03:19.080Z,1513252999.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:19.096Z,1513252999.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:19.480Z,1513252999.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:19.499Z,1513252999.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:19.919Z,1513252999.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:19.984Z,1513252999.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:20.284Z,1513253000.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:20.299Z,1513253000.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:20.695Z,1513253000.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:20.727Z,1513253000.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:21.087Z,1513253001.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:21.101Z,1513253001.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:21.479Z,1513253001.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:21.494Z,1513253001.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:21.880Z,1513253001.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:21.908Z,1513253001.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:22.349Z,1513253002.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:22.384Z,1513253002.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:22.672Z,1513253002.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:22.711Z,1513253002.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:23.124Z,1513253003.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:23.156Z,1513253003.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:23.479Z,1513253003.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:23.494Z,1513253003.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:23.882Z,1513253003.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:23.896Z,1513253003.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:24.338Z,1513253004.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:24.375Z,1513253004.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:24.676Z,1513253004.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:24.703Z,1513253004.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:25.088Z,1513253005.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:25.139Z,1513253005.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:25.475Z,1513253005.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:25.496Z,1513253005.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:25.875Z,1513253005.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:25.918Z,1513253005.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:26.360Z,1513253006.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:26.399Z,1513253006.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:26.702Z,1513253006.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:26.723Z,1513253006.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:27.088Z,1513253007.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:27.103Z,1513253007.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:27.473Z,1513253007.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:27.500Z,1513253007.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:27.875Z,1513253007.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:27.908Z,1513253007.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:28.358Z,1513253008.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:28.373Z,1513253008.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:28.675Z,1513253008.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:28.711Z,1513253008.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:29.076Z,1513253009.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:29.107Z,1513253009.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:29.479Z,1513253009.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:29.518Z,1513253009.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:29.880Z,1513253009.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:29.900Z,1513253009.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:30.282Z,1513253010.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:30.366Z,1513253010.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:30.690Z,1513253010.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:30.710Z,1513253010.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:31.087Z,1513253011.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:31.102Z,1513253011.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:31.494Z,1513253011.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:31.509Z,1513253011.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:31.892Z,1513253011.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:31.907Z,1513253011.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:32.288Z,1513253012.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:32.305Z,1513253012.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:32.738Z,1513253012.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:32.793Z,1513253012.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:33.086Z,1513253013.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:33.118Z,1513253013.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:33.481Z,1513253013.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:33.496Z,1513253013.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:33.886Z,1513253013.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:33.903Z,1513253013.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:34.283Z,1513253014.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:34.300Z,1513253014.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:34.688Z,1513253014.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:34.720Z,1513253014.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:35.079Z,1513253015.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:35.102Z,1513253015.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:35.492Z,1513253015.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:35.544Z,1513253015.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:35.887Z,1513253015.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:35.939Z,1513253015.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:36.322Z,1513253016.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:36.362Z,1513253016.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:36.680Z,1513253016.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:36.713Z,1513253016.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:37.075Z,1513253017.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:37.155Z,1513253017.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:37.483Z,1513253017.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:37.498Z,1513253017.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:37.886Z,1513253017.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:37.926Z,1513253017.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:38.322Z,1513253018.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:38.353Z,1513253018.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:38.694Z,1513253018.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:38.747Z,1513253018.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:39.137Z,1513253019.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:39.165Z,1513253019.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:39.472Z,1513253019.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:39.498Z,1513253019.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:39.889Z,1513253019.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:39.903Z,1513253019.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:40.328Z,1513253020.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:40.384Z,1513253020.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:40.669Z,1513253020.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:40.697Z,1513253020.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:41.074Z,1513253021.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:41.119Z,1513253021.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:41.474Z,1513253021.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:41.516Z,1513253021.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:41.873Z,1513253021.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:41.887Z,1513253021.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:42.353Z,1513253022.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:42.405Z,1513253022.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:42.690Z,1513253022.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:42.706Z,1513253022.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:43.083Z,1513253023.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:43.098Z,1513253023.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:43.483Z,1513253023.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:43.497Z,1513253023.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:43.886Z,1513253023.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:43.900Z,1513253023.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:44.285Z,1513253024.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:44.378Z,1513253024.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:44.694Z,1513253024.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:44.708Z,1513253024.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:45.083Z,1513253025.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:45.099Z,1513253025.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:45.486Z,1513253025.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:45.501Z,1513253025.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:45.862Z,1513253025.862 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:03:45.893Z,1513253025.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:45.908Z,1513253025.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:46.287Z,1513253026.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:46.301Z,1513253026.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:46.687Z,1513253026.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:46.714Z,1513253026.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:47.089Z,1513253027.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:47.142Z,1513253027.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:47.486Z,1513253027.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:47.502Z,1513253027.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:47.887Z,1513253027.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:47.902Z,1513253027.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:48.283Z,1513253028.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:48.298Z,1513253028.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:48.701Z,1513253028.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:48.741Z,1513253028.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:49.079Z,1513253029.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:49.115Z,1513253029.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:49.479Z,1513253029.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:49.514Z,1513253029.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:49.882Z,1513253029.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:49.921Z,1513253029.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:50.333Z,1513253030.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:50.371Z,1513253030.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:50.680Z,1513253030.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:50.705Z,1513253030.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:51.081Z,1513253031.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:51.096Z,1513253031.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:51.482Z,1513253031.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:51.498Z,1513253031.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:51.892Z,1513253031.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:51.947Z,1513253031.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:52.325Z,1513253032.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:52.339Z,1513253032.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:52.675Z,1513253032.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:52.691Z,1513253032.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:53.080Z,1513253033.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:53.095Z,1513253033.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:53.497Z,1513253033.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:53.511Z,1513253033.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:53.872Z,1513253033.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:53.907Z,1513253033.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:54.335Z,1513253034.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:54.359Z,1513253034.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:54.675Z,1513253034.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:54.717Z,1513253034.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:55.112Z,1513253035.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:55.157Z,1513253035.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:55.474Z,1513253035.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:55.510Z,1513253035.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:55.878Z,1513253035.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:55.907Z,1513253035.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:56.326Z,1513253036.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:56.362Z,1513253036.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:56.706Z,1513253036.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:56.743Z,1513253036.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:57.062Z,1513253037.062 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:03:57.079Z,1513253037.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:57.118Z,1513253037.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:57.479Z,1513253037.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:57.506Z,1513253037.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:57.890Z,1513253037.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:57.920Z,1513253037.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:58.348Z,1513253038.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:58.422Z,1513253038.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:58.706Z,1513253038.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:58.741Z,1513253038.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:59.080Z,1513253039.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:59.142Z,1513253039.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:59.484Z,1513253039.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:59.559Z,1513253039.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:03:59.869Z,1513253039.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:03:59.893Z,1513253039.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:00.298Z,1513253040.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:00.351Z,1513253040.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:00.707Z,1513253040.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:00.724Z,1513253040.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:01.100Z,1513253041.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:01.159Z,1513253041.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:01.480Z,1513253041.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:01.507Z,1513253041.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:01.903Z,1513253041.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:01.923Z,1513253041.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:02.281Z,1513253042.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:02.308Z,1513253042.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:02.693Z,1513253042.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:02.732Z,1513253042.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:03.104Z,1513253043.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:03.138Z,1513253043.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:03.494Z,1513253043.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:03.521Z,1513253043.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:06.977Z,1513253046.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:06.999Z,1513253046.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:07.118Z,1513253047.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:07.139Z,1513253047.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:07.490Z,1513253047.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:07.504Z,1513253047.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:07.909Z,1513253047.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:07.940Z,1513253047.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:08.329Z,1513253048.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:08.357Z,1513253048.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:08.684Z,1513253048.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:08.712Z,1513253048.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:09.102Z,1513253049.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:09.123Z,1513253049.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:09.498Z,1513253049.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:09.551Z,1513253049.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:09.902Z,1513253049.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:09.917Z,1513253049.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:10.334Z,1513253050.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:10.363Z,1513253050.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:10.680Z,1513253050.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:10.715Z,1513253050.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:11.118Z,1513253051.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:11.155Z,1513253051.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:11.490Z,1513253051.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:11.512Z,1513253051.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:11.894Z,1513253051.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:11.928Z,1513253051.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:12.276Z,1513253052.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:12.348Z,1513253052.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:12.692Z,1513253052.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:12.718Z,1513253052.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:13.088Z,1513253053.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:13.104Z,1513253053.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:13.494Z,1513253053.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:13.530Z,1513253053.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:13.893Z,1513253053.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:13.930Z,1513253053.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:14.296Z,1513253054.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:14.338Z,1513253054.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:14.690Z,1513253054.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:14.748Z,1513253054.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:15.087Z,1513253055.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:15.103Z,1513253055.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:15.477Z,1513253055.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:15.491Z,1513253055.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:15.876Z,1513253055.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:15.900Z,1513253055.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:16.293Z,1513253056.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:16.323Z,1513253056.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:16.690Z,1513253056.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:16.724Z,1513253056.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:17.089Z,1513253057.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:17.124Z,1513253057.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:17.534Z,1513253057.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:17.571Z,1513253057.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:17.886Z,1513253057.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:17.918Z,1513253057.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:18.328Z,1513253058.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:18.348Z,1513253058.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:18.686Z,1513253058.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:18.702Z,1513253058.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:19.086Z,1513253059.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:19.101Z,1513253059.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:19.488Z,1513253059.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:19.507Z,1513253059.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:19.890Z,1513253059.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:19.905Z,1513253059.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:20.348Z,1513253060.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:20.363Z,1513253060.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:20.718Z,1513253060.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:20.767Z,1513253060.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:21.111Z,1513253061.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:21.131Z,1513253061.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:21.503Z,1513253061.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:21.573Z,1513253061.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:21.902Z,1513253061.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:21.917Z,1513253061.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:22.328Z,1513253062.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:22.395Z,1513253062.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:22.679Z,1513253062.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:22.697Z,1513253062.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:23.093Z,1513253063.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:23.143Z,1513253063.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:23.493Z,1513253063.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:23.508Z,1513253063.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:23.926Z,1513253063.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:23.954Z,1513253063.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:24.333Z,1513253064.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:24.382Z,1513253064.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:24.680Z,1513253064.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:24.711Z,1513253064.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:25.094Z,1513253065.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:25.109Z,1513253065.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:25.494Z,1513253065.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:25.508Z,1513253065.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:25.890Z,1513253065.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:25.915Z,1513253065.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:26.287Z,1513253066.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:26.371Z,1513253066.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:26.694Z,1513253066.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:26.721Z,1513253066.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:27.097Z,1513253067.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:27.134Z,1513253067.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:27.485Z,1513253067.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:27.515Z,1513253067.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:27.885Z,1513253067.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:27.918Z,1513253067.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:28.286Z,1513253068.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:28.315Z,1513253068.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:28.679Z,1513253068.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:28.727Z,1513253068.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:29.075Z,1513253069.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:29.090Z,1513253069.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:29.476Z,1513253069.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:29.495Z,1513253069.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:29.883Z,1513253069.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:29.898Z,1513253069.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:30.331Z,1513253070.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:30.370Z,1513253070.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:30.696Z,1513253070.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:30.736Z,1513253070.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:31.095Z,1513253071.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:31.126Z,1513253071.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:31.479Z,1513253071.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:31.536Z,1513253071.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:31.879Z,1513253071.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:31.895Z,1513253071.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:32.335Z,1513253072.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:32.359Z,1513253072.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:32.685Z,1513253072.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:32.712Z,1513253072.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:33.094Z,1513253073.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:33.115Z,1513253073.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:33.546Z,1513253073.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:33.570Z,1513253073.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:33.900Z,1513253073.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:33.914Z,1513253073.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:34.327Z,1513253074.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:34.365Z,1513253074.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:34.676Z,1513253074.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:34.719Z,1513253074.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:35.105Z,1513253075.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:35.123Z,1513253075.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:35.486Z,1513253075.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:35.523Z,1513253075.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:35.890Z,1513253075.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:35.923Z,1513253075.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:36.326Z,1513253076.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:36.357Z,1513253076.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:36.713Z,1513253076.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:36.745Z,1513253076.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:37.115Z,1513253077.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:37.135Z,1513253077.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:37.504Z,1513253077.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:37.524Z,1513253077.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:37.882Z,1513253077.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:37.906Z,1513253077.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:38.337Z,1513253078.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:38.371Z,1513253078.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:38.678Z,1513253078.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:38.693Z,1513253078.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:39.094Z,1513253079.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:39.116Z,1513253079.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:39.493Z,1513253079.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:39.517Z,1513253079.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:39.933Z,1513253079.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:39.948Z,1513253079.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:40.281Z,1513253080.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:40.366Z,1513253080.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:40.684Z,1513253080.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:40.712Z,1513253080.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:41.082Z,1513253081.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:41.103Z,1513253081.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:41.494Z,1513253081.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:41.508Z,1513253081.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:41.894Z,1513253081.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:41.914Z,1513253081.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:42.294Z,1513253082.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:42.359Z,1513253082.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:42.690Z,1513253082.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:42.730Z,1513253082.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:43.129Z,1513253083.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:43.212Z,1513253083.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:43.485Z,1513253083.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:43.499Z,1513253083.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:43.877Z,1513253083.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:43.893Z,1513253083.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:44.290Z,1513253084.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:44.335Z,1513253084.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:44.691Z,1513253084.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:44.731Z,1513253084.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:45.091Z,1513253085.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:45.158Z,1513253085.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:45.479Z,1513253085.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:45.494Z,1513253085.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:45.883Z,1513253085.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:45.898Z,1513253085.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:46.367Z,1513253086.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:46.412Z,1513253086.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:46.708Z,1513253086.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:46.723Z,1513253086.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:47.100Z,1513253087.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:47.120Z,1513253087.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:47.498Z,1513253087.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:47.513Z,1513253087.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:47.899Z,1513253087.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:47.915Z,1513253087.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:48.339Z,1513253088.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:48.388Z,1513253088.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:48.675Z,1513253088.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:48.719Z,1513253088.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:49.103Z,1513253089.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:49.123Z,1513253089.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:49.489Z,1513253089.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:49.522Z,1513253089.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:49.886Z,1513253089.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:49.902Z,1513253089.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:50.341Z,1513253090.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:50.379Z,1513253090.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:50.684Z,1513253090.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:50.708Z,1513253090.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:51.094Z,1513253091.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:51.110Z,1513253091.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:51.490Z,1513253091.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:51.504Z,1513253091.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:51.891Z,1513253091.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:51.906Z,1513253091.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:52.331Z,1513253092.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:52.359Z,1513253092.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:52.738Z,1513253092.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:52.765Z,1513253092.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:53.099Z,1513253093.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:53.119Z,1513253093.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:53.497Z,1513253093.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:53.549Z,1513253093.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:53.898Z,1513253093.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:53.915Z,1513253093.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:54.313Z,1513253094.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:54.392Z,1513253094.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:54.694Z,1513253094.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:54.709Z,1513253094.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:55.071Z,1513253095.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:55.103Z,1513253095.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:55.498Z,1513253095.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:55.513Z,1513253095.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:55.904Z,1513253095.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:55.928Z,1513253095.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:56.286Z,1513253096.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:56.313Z,1513253096.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:56.710Z,1513253096.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:56.728Z,1513253096.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:57.076Z,1513253097.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:57.112Z,1513253097.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:57.475Z,1513253097.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:57.506Z,1513253097.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:57.879Z,1513253097.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:57.918Z,1513253097.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:58.289Z,1513253098.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:58.316Z,1513253098.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:58.692Z,1513253098.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:58.731Z,1513253098.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:59.096Z,1513253099.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:59.128Z,1513253099.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:59.482Z,1513253099.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:59.496Z,1513253099.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:04:59.887Z,1513253099.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:04:59.922Z,1513253099.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:00.338Z,1513253100.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:00.383Z,1513253100.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:00.689Z,1513253100.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:00.724Z,1513253100.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:01.098Z,1513253101.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:01.126Z,1513253101.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:01.489Z,1513253101.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:01.504Z,1513253101.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:01.898Z,1513253101.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:01.912Z,1513253101.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:02.393Z,1513253102.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:02.426Z,1513253102.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:02.675Z,1513253102.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:02.720Z,1513253102.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:03.090Z,1513253103.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:03.123Z,1513253103.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:03.502Z,1513253103.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:03.517Z,1513253103.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:07.014Z,1513253107.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:07.088Z,1513253107.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:07.188Z,1513253107.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:07.216Z,1513253107.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:07.570Z,1513253107.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:07.585Z,1513253107.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:07.970Z,1513253107.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:07.985Z,1513253107.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:08.387Z,1513253108.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:08.428Z,1513253108.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:08.780Z,1513253108.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:08.822Z,1513253108.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:09.178Z,1513253109.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:09.227Z,1513253109.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:09.576Z,1513253109.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:09.591Z,1513253109.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:09.978Z,1513253109.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:09.995Z,1513253109.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:10.369Z,1513253110.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:10.383Z,1513253110.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:10.762Z,1513253110.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:10.784Z,1513253110.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:11.162Z,1513253111.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:11.188Z,1513253111.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:11.560Z,1513253111.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:11.587Z,1513253111.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:11.983Z,1513253111.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:12.015Z,1513253112.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:12.366Z,1513253112.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:12.399Z,1513253112.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:12.777Z,1513253112.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:12.799Z,1513253112.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:13.180Z,1513253113.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:13.195Z,1513253113.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:13.555Z,1513253113.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:13.593Z,1513253113.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:13.955Z,1513253113.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:13.992Z,1513253113.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:14.356Z,1513253114.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:14.390Z,1513253114.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:14.763Z,1513253114.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:14.795Z,1513253114.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:15.172Z,1513253115.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:15.208Z,1513253115.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:15.569Z,1513253115.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:15.607Z,1513253115.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:15.970Z,1513253115.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:15.984Z,1513253115.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:16.364Z,1513253116.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:16.379Z,1513253116.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:16.764Z,1513253116.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:16.779Z,1513253116.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:17.166Z,1513253117.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:17.181Z,1513253117.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:17.566Z,1513253117.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:17.626Z,1513253117.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:17.966Z,1513253117.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:17.981Z,1513253117.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:18.417Z,1513253118.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:18.463Z,1513253118.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:18.774Z,1513253118.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:18.789Z,1513253118.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:19.174Z,1513253119.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:19.189Z,1513253119.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:19.573Z,1513253119.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:19.588Z,1513253119.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:19.965Z,1513253119.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:19.980Z,1513253119.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:20.365Z,1513253120.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:20.381Z,1513253120.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:20.768Z,1513253120.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:20.783Z,1513253120.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:21.174Z,1513253121.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:21.189Z,1513253121.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:21.573Z,1513253121.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:21.588Z,1513253121.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:21.978Z,1513253121.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:21.999Z,1513253121.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:22.392Z,1513253122.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:22.425Z,1513253122.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:22.764Z,1513253122.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:22.784Z,1513253122.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:23.159Z,1513253123.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:23.182Z,1513253123.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:23.565Z,1513253123.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:23.580Z,1513253123.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:23.957Z,1513253123.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:23.984Z,1513253123.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:24.382Z,1513253124.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:24.403Z,1513253124.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:24.775Z,1513253124.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:24.820Z,1513253124.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:25.179Z,1513253125.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:25.204Z,1513253125.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:25.564Z,1513253125.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:25.579Z,1513253125.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:25.826Z,1513253125.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:25.960Z,1513253125.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:25.983Z,1513253125.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:26.362Z,1513253126.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:26.389Z,1513253126.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:26.623Z,1513253126.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:26.770Z,1513253126.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:26.791Z,1513253126.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:27.033Z,1513253127.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:27.174Z,1513253127.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:27.195Z,1513253127.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:27.578Z,1513253127.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:27.599Z,1513253127.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:27.830Z,1513253127.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:28.004Z,1513253128.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:28.042Z,1513253128.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:28.356Z,1513253128.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:28.399Z,1513253128.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:28.627Z,1513253128.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:28.774Z,1513253128.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:28.793Z,1513253128.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:29.033Z,1513253129.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:29.156Z,1513253129.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:29.211Z,1513253129.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:29.561Z,1513253129.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:29.589Z,1513253129.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:29.959Z,1513253129.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:30.033Z,1513253130.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:30.375Z,1513253130.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:30.390Z,1513253130.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:30.788Z,1513253130.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:30.878Z,1513253130.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:31.208Z,1513253131.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:31.236Z,1513253131.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:31.556Z,1513253131.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:31.595Z,1513253131.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:31.955Z,1513253131.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:31.986Z,1513253131.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:32.359Z,1513253132.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:32.396Z,1513253132.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:32.758Z,1513253132.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:32.788Z,1513253132.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:33.169Z,1513253133.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:33.204Z,1513253133.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:33.567Z,1513253133.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:33.595Z,1513253133.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:33.965Z,1513253133.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:34.006Z,1513253134.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:34.391Z,1513253134.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:34.419Z,1513253134.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:34.768Z,1513253134.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:34.803Z,1513253134.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:35.167Z,1513253135.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:35.182Z,1513253135.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:35.567Z,1513253135.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:35.582Z,1513253135.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:35.958Z,1513253135.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:35.986Z,1513253135.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:36.412Z,1513253136.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:36.431Z,1513253136.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:36.771Z,1513253136.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:36.816Z,1513253136.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:37.171Z,1513253137.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:37.187Z,1513253137.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:37.603Z,1513253137.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:37.631Z,1513253137.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:37.966Z,1513253137.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:37.989Z,1513253137.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:38.356Z,1513253138.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:38.391Z,1513253138.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:38.755Z,1513253138.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:38.790Z,1513253138.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:39.178Z,1513253139.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:39.228Z,1513253139.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:39.583Z,1513253139.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:39.598Z,1513253139.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:39.831Z,1513253139.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:39.975Z,1513253139.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:39.995Z,1513253139.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:40.359Z,1513253140.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:40.387Z,1513253140.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:40.627Z,1513253140.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:40.778Z,1513253140.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:40.818Z,1513253140.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:41.038Z,1513253141.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:41.161Z,1513253141.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:41.193Z,1513253141.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:41.567Z,1513253141.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:41.604Z,1513253141.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:41.834Z,1513253141.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:41.957Z,1513253141.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:41.972Z,1513253141.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:42.369Z,1513253142.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:42.401Z,1513253142.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:42.629Z,1513253142.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:42.782Z,1513253142.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:42.808Z,1513253142.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:43.037Z,1513253143.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:43.171Z,1513253143.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:43.191Z,1513253143.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:43.563Z,1513253143.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:43.579Z,1513253143.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:44.008Z,1513253144.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:44.040Z,1513253144.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:44.365Z,1513253144.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:44.380Z,1513253144.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:44.759Z,1513253144.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:44.782Z,1513253144.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:45.175Z,1513253145.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:45.190Z,1513253145.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:45.571Z,1513253145.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:45.599Z,1513253145.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:45.978Z,1513253145.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:45.993Z,1513253145.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:46.373Z,1513253146.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:46.389Z,1513253146.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:46.759Z,1513253146.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:46.782Z,1513253146.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:47.194Z,1513253147.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:47.226Z,1513253147.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:47.556Z,1513253147.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:47.588Z,1513253147.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:47.955Z,1513253147.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:47.995Z,1513253147.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:48.385Z,1513253148.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:48.399Z,1513253148.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:48.782Z,1513253148.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:48.798Z,1513253148.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:49.178Z,1513253149.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:49.193Z,1513253149.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:49.555Z,1513253149.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:49.591Z,1513253149.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:49.958Z,1513253149.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:50.010Z,1513253150.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:50.411Z,1513253150.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:50.451Z,1513253150.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:50.755Z,1513253150.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:50.795Z,1513253150.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:51.169Z,1513253151.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:51.216Z,1513253151.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:51.566Z,1513253151.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:51.589Z,1513253151.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:51.968Z,1513253151.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:52.003Z,1513253152.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:52.357Z,1513253152.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:52.402Z,1513253152.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:52.764Z,1513253152.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:52.780Z,1513253152.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:53.163Z,1513253153.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:53.219Z,1513253153.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:53.568Z,1513253153.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:53.628Z,1513253153.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:53.835Z,1513253153.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:53.955Z,1513253153.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:53.982Z,1513253153.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:54.385Z,1513253154.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:54.407Z,1513253154.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:54.632Z,1513253154.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:54.779Z,1513253154.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:54.802Z,1513253154.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:55.041Z,1513253155.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:55.179Z,1513253155.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:55.194Z,1513253155.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:55.555Z,1513253155.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:55.590Z,1513253155.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:55.838Z,1513253155.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:55.955Z,1513253155.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:55.997Z,1513253155.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:56.356Z,1513253156.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:56.395Z,1513253156.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:56.634Z,1513253156.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:56.802Z,1513253156.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:56.849Z,1513253156.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:57.039Z,1513253157.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:57.178Z,1513253157.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:57.204Z,1513253157.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:57.569Z,1513253157.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:57.600Z,1513253157.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:57.973Z,1513253157.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:58.004Z,1513253158.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:58.363Z,1513253158.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:58.383Z,1513253158.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:58.763Z,1513253158.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:58.778Z,1513253158.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:59.161Z,1513253159.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:59.184Z,1513253159.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:59.562Z,1513253159.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:05:59.590Z,1513253159.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:05:59.970Z,1513253159.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:00.001Z,1513253160.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:00.375Z,1513253160.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:00.389Z,1513253160.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:00.776Z,1513253160.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:00.804Z,1513253160.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:01.179Z,1513253161.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:01.194Z,1513253161.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:01.556Z,1513253161.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:01.603Z,1513253161.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:01.957Z,1513253161.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:01.994Z,1513253161.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:02.356Z,1513253162.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:02.387Z,1513253162.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:02.755Z,1513253162.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:02.791Z,1513253162.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:03.216Z,1513253163.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:03.262Z,1513253163.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:03.579Z,1513253163.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:03.594Z,1513253163.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:07.225Z,1513253167.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:07.247Z,1513253167.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:07.341Z,1513253167.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:07.385Z,1513253167.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:07.704Z,1513253167.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:07.737Z,1513253167.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:07.833Z,1513253167.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:08.099Z,1513253168.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:08.114Z,1513253168.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:08.500Z,1513253168.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:08.538Z,1513253168.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:08.634Z,1513253168.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:08.904Z,1513253168.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:08.927Z,1513253168.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:09.041Z,1513253169.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:09.314Z,1513253169.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:09.329Z,1513253169.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:09.710Z,1513253169.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:09.731Z,1513253169.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:09.842Z,1513253169.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:10.110Z,1513253170.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:10.124Z,1513253170.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:10.504Z,1513253170.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:10.520Z,1513253170.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:10.640Z,1513253170.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:10.898Z,1513253170.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:10.928Z,1513253170.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:11.045Z,1513253171.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:11.308Z,1513253171.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:11.322Z,1513253171.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:11.709Z,1513253171.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:11.724Z,1513253171.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:12.110Z,1513253172.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:12.125Z,1513253172.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:12.510Z,1513253172.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:12.574Z,1513253172.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:12.914Z,1513253172.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:12.935Z,1513253172.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:13.307Z,1513253173.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:13.323Z,1513253173.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:13.706Z,1513253173.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:13.771Z,1513253173.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:14.114Z,1513253174.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:14.135Z,1513253174.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:14.525Z,1513253174.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:14.556Z,1513253174.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:14.914Z,1513253174.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:14.983Z,1513253174.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:15.309Z,1513253175.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:15.323Z,1513253175.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:15.702Z,1513253175.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:15.779Z,1513253175.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:16.094Z,1513253176.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:16.127Z,1513253176.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:16.520Z,1513253176.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:16.535Z,1513253176.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:16.923Z,1513253176.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:16.969Z,1513253176.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:17.317Z,1513253177.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:17.375Z,1513253177.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:17.697Z,1513253177.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:17.735Z,1513253177.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:18.104Z,1513253178.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:18.124Z,1513253178.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:18.497Z,1513253178.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:18.554Z,1513253178.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:18.897Z,1513253178.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:18.972Z,1513253178.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:18.972Z,1513253178.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 231
2017-12-14T12:06:18.972Z,1513253178.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:06:18.986Z,1513253178.986 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:18.986Z,1513253178.986 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 231
2017-12-14T12:06:18.987Z,1513253178.987 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:06:18.988Z,1513253178.988 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:19.002Z,1513253179.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 231
2017-12-14T12:06:19.002Z,1513253179.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:06:19.073Z,1513253179.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:06:19.073Z,1513253179.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:06:19.074Z,1513253179.074 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:06:19.316Z,1513253179.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:19.385Z,1513253179.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:06:19.386Z,1513253179.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 231
2017-12-14T12:06:19.386Z,1513253179.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:06:19.386Z,1513253179.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 231
2017-12-14T12:06:19.387Z,1513253179.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:06:19.387Z,1513253179.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 231
2017-12-14T12:06:19.719Z,1513253179.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:19.757Z,1513253179.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:06:19.757Z,1513253179.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:06:19.758Z,1513253179.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:06:19.758Z,1513253179.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:06:19.758Z,1513253179.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:06:19.759Z,1513253179.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:06:19.759Z,1513253179.759 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:06:19.760Z,1513253179.760 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:06:19.760Z,1513253179.760 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:06:20.130Z,1513253180.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:20.153Z,1513253180.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:20.511Z,1513253180.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:20.579Z,1513253180.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:20.910Z,1513253180.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:20.973Z,1513253180.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:21.299Z,1513253181.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:21.338Z,1513253181.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:21.698Z,1513253181.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:21.736Z,1513253181.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:21.874Z,1513253181.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:22.109Z,1513253182.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:22.180Z,1513253182.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:22.522Z,1513253182.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:22.567Z,1513253182.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:22.669Z,1513253182.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:22.922Z,1513253182.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:22.962Z,1513253182.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:23.074Z,1513253183.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:23.306Z,1513253183.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:23.327Z,1513253183.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:23.712Z,1513253183.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:23.736Z,1513253183.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:24.113Z,1513253184.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:24.170Z,1513253184.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:24.515Z,1513253184.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:24.560Z,1513253184.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:24.952Z,1513253184.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:25.004Z,1513253185.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:25.317Z,1513253185.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:25.352Z,1513253185.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:25.697Z,1513253185.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:25.728Z,1513253185.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:26.114Z,1513253186.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:26.182Z,1513253186.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:26.527Z,1513253186.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:26.556Z,1513253186.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:26.908Z,1513253186.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:26.947Z,1513253186.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:27.307Z,1513253187.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:27.353Z,1513253187.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:27.703Z,1513253187.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:27.723Z,1513253187.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:28.122Z,1513253188.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:28.167Z,1513253188.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:28.546Z,1513253188.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:28.561Z,1513253188.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:28.924Z,1513253188.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:28.955Z,1513253188.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:29.323Z,1513253189.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:29.351Z,1513253189.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:29.705Z,1513253189.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:29.779Z,1513253189.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:30.135Z,1513253190.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:30.164Z,1513253190.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:30.510Z,1513253190.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:30.551Z,1513253190.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:30.911Z,1513253190.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:30.940Z,1513253190.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:31.318Z,1513253191.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:31.348Z,1513253191.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:31.713Z,1513253191.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:31.736Z,1513253191.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:32.214Z,1513253192.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:32.317Z,1513253192.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:32.516Z,1513253192.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:32.549Z,1513253192.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:32.916Z,1513253192.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:32.936Z,1513253192.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:33.319Z,1513253193.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:33.347Z,1513253193.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:33.697Z,1513253193.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:33.742Z,1513253193.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:34.134Z,1513253194.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:34.157Z,1513253194.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:34.515Z,1513253194.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:34.552Z,1513253194.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:34.918Z,1513253194.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:34.944Z,1513253194.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:35.318Z,1513253195.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:35.365Z,1513253195.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:35.698Z,1513253195.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:35.788Z,1513253195.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:35.862Z,1513253195.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:36.117Z,1513253196.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:36.145Z,1513253196.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:36.509Z,1513253196.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:36.544Z,1513253196.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:36.657Z,1513253196.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:36.911Z,1513253196.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:36.954Z,1513253196.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:37.298Z,1513253197.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:37.335Z,1513253197.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:37.714Z,1513253197.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:37.790Z,1513253197.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:38.128Z,1513253198.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:38.203Z,1513253198.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:38.512Z,1513253198.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:38.575Z,1513253198.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:38.908Z,1513253198.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:38.967Z,1513253198.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:39.297Z,1513253199.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:39.370Z,1513253199.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:39.701Z,1513253199.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:39.749Z,1513253199.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:40.108Z,1513253200.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:40.144Z,1513253200.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:40.516Z,1513253200.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:40.570Z,1513253200.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:40.920Z,1513253200.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:40.954Z,1513253200.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:41.305Z,1513253201.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:41.353Z,1513253201.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:41.708Z,1513253201.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:41.763Z,1513253201.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:42.132Z,1513253202.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:42.163Z,1513253202.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:42.521Z,1513253202.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:42.547Z,1513253202.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:42.912Z,1513253202.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:42.954Z,1513253202.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:43.298Z,1513253203.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:43.341Z,1513253203.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:43.700Z,1513253203.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:43.746Z,1513253203.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:44.115Z,1513253204.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:44.170Z,1513253204.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:44.515Z,1513253204.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:44.551Z,1513253204.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:44.916Z,1513253204.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:44.951Z,1513253204.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:45.303Z,1513253205.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:45.359Z,1513253205.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:45.701Z,1513253205.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:45.754Z,1513253205.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:46.107Z,1513253206.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:46.131Z,1513253206.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:46.532Z,1513253206.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:46.592Z,1513253206.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:46.908Z,1513253206.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:46.955Z,1513253206.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:47.305Z,1513253207.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:47.358Z,1513253207.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:47.566Z,1513253207.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:47.718Z,1513253207.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:47.763Z,1513253207.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:48.102Z,1513253208.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:48.141Z,1513253208.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:48.362Z,1513253208.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:48.533Z,1513253208.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:48.568Z,1513253208.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:48.925Z,1513253208.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:48.972Z,1513253208.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:49.308Z,1513253209.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:49.342Z,1513253209.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:49.696Z,1513253209.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:49.777Z,1513253209.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:50.104Z,1513253210.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:50.134Z,1513253210.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:50.498Z,1513253210.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:50.530Z,1513253210.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:50.894Z,1513253210.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:50.915Z,1513253210.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:51.309Z,1513253211.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:51.338Z,1513253211.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:51.709Z,1513253211.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:51.739Z,1513253211.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:52.105Z,1513253212.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:52.139Z,1513253212.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:52.502Z,1513253212.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:52.532Z,1513253212.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:52.904Z,1513253212.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:52.921Z,1513253212.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:53.300Z,1513253213.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:53.338Z,1513253213.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:53.701Z,1513253213.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:53.716Z,1513253213.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:54.114Z,1513253214.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:54.145Z,1513253214.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:54.525Z,1513253214.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:54.559Z,1513253214.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:54.918Z,1513253214.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:54.977Z,1513253214.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:55.304Z,1513253215.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:55.324Z,1513253215.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:55.704Z,1513253215.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:55.719Z,1513253215.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:56.109Z,1513253216.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:56.124Z,1513253216.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:56.510Z,1513253216.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:56.525Z,1513253216.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:56.919Z,1513253216.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:56.952Z,1513253216.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:57.305Z,1513253217.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:57.321Z,1513253217.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:57.703Z,1513253217.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:57.718Z,1513253217.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:58.106Z,1513253218.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:58.121Z,1513253218.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:58.529Z,1513253218.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:58.560Z,1513253218.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:58.922Z,1513253218.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:58.979Z,1513253218.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:59.303Z,1513253219.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:59.384Z,1513253219.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:06:59.702Z,1513253219.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:06:59.716Z,1513253219.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:00.110Z,1513253220.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:00.124Z,1513253220.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:00.509Z,1513253220.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:00.524Z,1513253220.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:00.911Z,1513253220.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:00.931Z,1513253220.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:01.308Z,1513253221.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:01.323Z,1513253221.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:01.703Z,1513253221.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:01.719Z,1513253221.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:02.126Z,1513253222.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:02.134Z,1513253222.134 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:07:02.134Z,1513253222.134 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:07:02.134Z,1513253222.134 [BPC1](ERROR): Communications Fault
2017-12-14T12:07:02.168Z,1513253222.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:02.182Z,1513253222.182 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:07:02.514Z,1513253222.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:02.530Z,1513253222.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:02.931Z,1513253222.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:02.946Z,1513253222.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:03.304Z,1513253223.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:03.334Z,1513253223.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:03.347Z,1513253223.347 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:07:03.347Z,1513253223.347 [BPC1] No Fault, FailCount= 1
2017-12-14T12:07:03.701Z,1513253223.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:03.783Z,1513253223.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:07.242Z,1513253227.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:07.257Z,1513253227.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:07.374Z,1513253227.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:07.419Z,1513253227.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:07.721Z,1513253227.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:07.775Z,1513253227.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:08.115Z,1513253228.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:08.130Z,1513253228.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:08.516Z,1513253228.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:08.531Z,1513253228.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:08.913Z,1513253228.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:08.927Z,1513253228.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:09.317Z,1513253229.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:09.333Z,1513253229.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:09.714Z,1513253229.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:09.729Z,1513253229.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:10.126Z,1513253230.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:10.156Z,1513253230.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:10.512Z,1513253230.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:10.526Z,1513253230.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:10.927Z,1513253230.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:11.010Z,1513253231.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:11.311Z,1513253231.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:11.331Z,1513253231.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:11.712Z,1513253231.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:11.727Z,1513253231.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:12.114Z,1513253232.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:12.162Z,1513253232.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:12.517Z,1513253232.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:12.533Z,1513253232.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:12.926Z,1513253232.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:12.961Z,1513253232.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:13.314Z,1513253233.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:13.329Z,1513253233.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:13.712Z,1513253233.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:13.727Z,1513253233.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:14.117Z,1513253234.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:14.171Z,1513253234.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:14.566Z,1513253234.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:14.581Z,1513253234.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:14.921Z,1513253234.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:14.936Z,1513253234.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:15.318Z,1513253235.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:15.332Z,1513253235.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:15.710Z,1513253235.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:15.728Z,1513253235.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:16.124Z,1513253236.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:16.139Z,1513253236.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:16.525Z,1513253236.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:16.540Z,1513253236.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:16.918Z,1513253236.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:16.949Z,1513253236.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:17.331Z,1513253237.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:17.380Z,1513253237.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:17.700Z,1513253237.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:17.735Z,1513253237.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:18.131Z,1513253238.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:18.146Z,1513253238.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:18.527Z,1513253238.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:18.542Z,1513253238.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:18.914Z,1513253238.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:18.941Z,1513253238.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:19.304Z,1513253239.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:19.339Z,1513253239.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:19.707Z,1513253239.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:19.738Z,1513253239.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:20.118Z,1513253240.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:20.145Z,1513253240.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:20.520Z,1513253240.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:20.553Z,1513253240.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:20.926Z,1513253240.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:20.949Z,1513253240.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:21.306Z,1513253241.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:21.321Z,1513253241.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:21.707Z,1513253241.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:21.728Z,1513253241.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:22.120Z,1513253242.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:22.139Z,1513253242.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:22.523Z,1513253242.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:22.544Z,1513253242.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:22.934Z,1513253242.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:22.998Z,1513253242.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:23.309Z,1513253243.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:23.336Z,1513253243.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:23.703Z,1513253243.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:23.778Z,1513253243.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:24.125Z,1513253244.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:24.196Z,1513253244.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:24.517Z,1513253244.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:24.532Z,1513253244.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:24.925Z,1513253244.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:24.967Z,1513253244.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:25.314Z,1513253245.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:25.329Z,1513253245.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:25.712Z,1513253245.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:25.735Z,1513253245.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:26.125Z,1513253246.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:26.162Z,1513253246.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:26.517Z,1513253246.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:26.532Z,1513253246.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:26.929Z,1513253246.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:26.970Z,1513253246.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:27.321Z,1513253247.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:27.336Z,1513253247.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:27.708Z,1513253247.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:27.770Z,1513253247.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:28.116Z,1513253248.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:28.132Z,1513253248.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:28.517Z,1513253248.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:28.531Z,1513253248.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:28.918Z,1513253248.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:28.933Z,1513253248.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:29.316Z,1513253249.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:29.331Z,1513253249.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:29.714Z,1513253249.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:29.728Z,1513253249.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:30.135Z,1513253250.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:30.171Z,1513253250.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:30.520Z,1513253250.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:30.540Z,1513253250.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:30.922Z,1513253250.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:30.951Z,1513253250.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:31.308Z,1513253251.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:31.333Z,1513253251.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:31.704Z,1513253251.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:31.735Z,1513253251.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:32.128Z,1513253252.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:32.143Z,1513253252.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:32.531Z,1513253252.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:32.546Z,1513253252.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:32.930Z,1513253252.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:32.959Z,1513253252.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:33.350Z,1513253253.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:33.404Z,1513253253.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:33.703Z,1513253253.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:33.730Z,1513253253.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:34.130Z,1513253254.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:34.151Z,1513253254.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:34.528Z,1513253254.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:34.547Z,1513253254.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:34.919Z,1513253254.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:34.949Z,1513253254.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:35.304Z,1513253255.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:35.340Z,1513253255.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:35.707Z,1513253255.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:35.733Z,1513253255.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:36.110Z,1513253256.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:36.143Z,1513253256.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:36.530Z,1513253256.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:36.551Z,1513253256.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:36.924Z,1513253256.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:36.943Z,1513253256.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:37.308Z,1513253257.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:37.336Z,1513253257.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:37.703Z,1513253257.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:37.738Z,1513253257.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:38.128Z,1513253258.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:38.142Z,1513253258.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:38.526Z,1513253258.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:38.547Z,1513253258.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:38.914Z,1513253258.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:39.039Z,1513253259.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:39.312Z,1513253259.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:39.340Z,1513253259.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:39.727Z,1513253259.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:39.759Z,1513253259.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:40.113Z,1513253260.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:40.149Z,1513253260.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:40.534Z,1513253260.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:40.550Z,1513253260.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:40.926Z,1513253260.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:40.946Z,1513253260.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:41.305Z,1513253261.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:41.336Z,1513253261.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:41.704Z,1513253261.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:41.744Z,1513253261.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:42.119Z,1513253262.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:42.155Z,1513253262.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:42.518Z,1513253262.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:42.551Z,1513253262.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:42.932Z,1513253262.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:42.984Z,1513253262.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:43.303Z,1513253263.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:43.339Z,1513253263.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:43.711Z,1513253263.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:43.764Z,1513253263.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:44.134Z,1513253264.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:44.150Z,1513253264.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:44.521Z,1513253264.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:44.546Z,1513253264.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:44.922Z,1513253264.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:44.953Z,1513253264.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:45.314Z,1513253265.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:45.377Z,1513253265.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:45.710Z,1513253265.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:45.725Z,1513253265.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:46.140Z,1513253266.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:46.207Z,1513253266.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:46.525Z,1513253266.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:46.558Z,1513253266.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:46.921Z,1513253266.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:46.977Z,1513253266.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:47.313Z,1513253267.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:47.327Z,1513253267.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:47.713Z,1513253267.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:47.728Z,1513253267.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:48.121Z,1513253268.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:48.140Z,1513253268.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:48.531Z,1513253268.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:48.546Z,1513253268.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:48.933Z,1513253268.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:48.955Z,1513253268.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:49.306Z,1513253269.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:49.383Z,1513253269.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:49.703Z,1513253269.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:49.738Z,1513253269.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:50.114Z,1513253270.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:50.139Z,1513253270.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:50.518Z,1513253270.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:50.543Z,1513253270.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:50.927Z,1513253270.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:50.942Z,1513253270.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:51.312Z,1513253271.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:51.343Z,1513253271.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:51.701Z,1513253271.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:51.716Z,1513253271.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:52.113Z,1513253272.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:52.147Z,1513253272.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:52.536Z,1513253272.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:52.563Z,1513253272.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:52.922Z,1513253272.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:52.946Z,1513253272.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:53.303Z,1513253273.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:53.318Z,1513253273.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:53.711Z,1513253273.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:53.725Z,1513253273.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:54.117Z,1513253274.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:54.132Z,1513253274.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:54.521Z,1513253274.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:54.555Z,1513253274.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:54.926Z,1513253274.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:54.953Z,1513253274.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:55.312Z,1513253275.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:55.367Z,1513253275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:55.745Z,1513253275.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:55.767Z,1513253275.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:56.121Z,1513253276.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:56.143Z,1513253276.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:56.521Z,1513253276.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:56.536Z,1513253276.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:56.921Z,1513253276.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:56.943Z,1513253276.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:57.319Z,1513253277.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:57.333Z,1513253277.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:57.557Z,1513253277.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:57.700Z,1513253277.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:57.715Z,1513253277.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:58.186Z,1513253278.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:58.214Z,1513253278.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:58.353Z,1513253278.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:58.518Z,1513253278.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:58.532Z,1513253278.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:58.937Z,1513253278.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:58.960Z,1513253278.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:59.315Z,1513253279.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:59.344Z,1513253279.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:07:59.704Z,1513253279.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:07:59.719Z,1513253279.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:00.118Z,1513253280.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:00.143Z,1513253280.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:00.533Z,1513253280.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:00.547Z,1513253280.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:00.917Z,1513253280.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:00.957Z,1513253280.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:01.311Z,1513253281.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:01.326Z,1513253281.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:01.712Z,1513253281.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:01.726Z,1513253281.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:02.151Z,1513253282.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:02.178Z,1513253282.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:02.521Z,1513253282.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:02.536Z,1513253282.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:02.916Z,1513253282.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:02.939Z,1513253282.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:03.317Z,1513253283.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:03.331Z,1513253283.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:03.717Z,1513253283.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:03.739Z,1513253283.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:03.742Z,1513253283.742 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:03:03.5Z
2017-12-14T12:08:03.743Z,1513253283.743 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T12:08:03.743Z,1513253283.743 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T12:08:07.349Z,1513253287.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:07.454Z,1513253287.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:08.085Z,1513253288.085 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0268.lzma
2017-12-14T12:08:08.126Z,1513253288.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:08.141Z,1513253288.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:08.288Z,1513253288.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:08.359Z,1513253288.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:08.572Z,1513253288.572 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0268.lzma.bak
2017-12-14T12:08:08.597Z,1513253288.597 [DataOverHttps](INFO): SBD MOMSN=5438676
2017-12-14T12:08:08.661Z,1513253288.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:08.702Z,1513253288.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:09.727Z,1513253289.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:09.775Z,1513253289.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:09.868Z,1513253289.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:09.883Z,1513253289.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:13.374Z,1513253293.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:13.390Z,1513253293.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:13.502Z,1513253293.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:13.534Z,1513253293.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:13.886Z,1513253293.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:13.911Z,1513253293.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:14.278Z,1513253294.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:14.303Z,1513253294.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:14.690Z,1513253294.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:14.715Z,1513253294.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:15.081Z,1513253295.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:15.108Z,1513253295.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:18.541Z,1513253298.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:18.594Z,1513253298.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:18.670Z,1513253298.670 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0269.lzma
2017-12-14T12:08:18.707Z,1513253298.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:18.722Z,1513253298.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:19.066Z,1513253299.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:19.123Z,1513253299.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:19.424Z,1513253299.424 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0269.lzma.bak
2017-12-14T12:08:19.424Z,1513253299.424 [DataOverHttps](INFO): SBD MOMSN=5438678
2017-12-14T12:08:19.469Z,1513253299.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:19.494Z,1513253299.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:20.842Z,1513253300.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:20.857Z,1513253300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:20.861Z,1513253300.861 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T12:08:20.861Z,1513253300.861 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T12:08:20.861Z,1513253300.861 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T12:08:20.967Z,1513253300.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:21.004Z,1513253301.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:24.551Z,1513253304.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:24.567Z,1513253304.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:24.691Z,1513253304.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:24.739Z,1513253304.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:25.097Z,1513253305.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:25.123Z,1513253305.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:25.480Z,1513253305.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:25.495Z,1513253305.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:25.880Z,1513253305.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:25.896Z,1513253305.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:26.274Z,1513253306.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:26.293Z,1513253306.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:26.685Z,1513253306.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:26.708Z,1513253306.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:27.077Z,1513253307.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:27.099Z,1513253307.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:27.492Z,1513253307.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:27.507Z,1513253307.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:27.934Z,1513253307.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:27.988Z,1513253307.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:28.286Z,1513253308.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:28.302Z,1513253308.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:28.683Z,1513253308.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:28.723Z,1513253308.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:29.065Z,1513253309.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:29.096Z,1513253309.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:29.472Z,1513253309.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:29.500Z,1513253309.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:29.869Z,1513253309.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:29.939Z,1513253309.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:30.340Z,1513253310.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:30.361Z,1513253310.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:30.696Z,1513253310.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:30.751Z,1513253310.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:31.080Z,1513253311.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:31.133Z,1513253311.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:31.467Z,1513253311.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:31.527Z,1513253311.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:31.871Z,1513253311.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:31.907Z,1513253311.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:32.345Z,1513253312.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:32.410Z,1513253312.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:32.669Z,1513253312.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:32.684Z,1513253312.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:33.085Z,1513253313.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:33.158Z,1513253313.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:33.485Z,1513253313.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:33.510Z,1513253313.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:33.884Z,1513253313.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:33.914Z,1513253313.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:34.336Z,1513253314.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:34.376Z,1513253314.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:34.700Z,1513253314.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:34.715Z,1513253314.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:35.100Z,1513253315.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:35.139Z,1513253315.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:35.487Z,1513253315.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:35.502Z,1513253315.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:35.892Z,1513253315.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:35.907Z,1513253315.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:36.322Z,1513253316.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:36.358Z,1513253316.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:36.667Z,1513253316.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:36.703Z,1513253316.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:37.096Z,1513253317.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:37.111Z,1513253317.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:37.495Z,1513253317.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:37.510Z,1513253317.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:37.878Z,1513253317.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:37.899Z,1513253317.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:38.272Z,1513253318.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:38.353Z,1513253318.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:38.683Z,1513253318.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:38.707Z,1513253318.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:39.076Z,1513253319.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:39.092Z,1513253319.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:39.490Z,1513253319.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:39.535Z,1513253319.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:39.881Z,1513253319.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:39.895Z,1513253319.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:40.278Z,1513253320.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:40.293Z,1513253320.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:40.725Z,1513253320.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:40.775Z,1513253320.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:41.076Z,1513253321.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:41.099Z,1513253321.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:41.477Z,1513253321.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:41.497Z,1513253321.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:41.878Z,1513253321.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:41.900Z,1513253321.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:42.284Z,1513253322.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:42.299Z,1513253322.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:42.682Z,1513253322.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:42.717Z,1513253322.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:43.095Z,1513253323.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:43.115Z,1513253323.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:43.472Z,1513253323.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:43.499Z,1513253323.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:43.866Z,1513253323.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:43.919Z,1513253323.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:44.316Z,1513253324.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:44.355Z,1513253324.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:44.672Z,1513253324.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:44.687Z,1513253324.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:45.086Z,1513253325.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:45.117Z,1513253325.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:45.490Z,1513253325.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:45.521Z,1513253325.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:45.902Z,1513253325.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:45.927Z,1513253325.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:46.314Z,1513253326.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:46.346Z,1513253326.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:46.671Z,1513253326.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:46.711Z,1513253326.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:47.124Z,1513253327.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:47.147Z,1513253327.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:47.481Z,1513253327.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:47.496Z,1513253327.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:47.893Z,1513253327.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:47.923Z,1513253327.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:48.328Z,1513253328.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:48.363Z,1513253328.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:48.682Z,1513253328.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:48.732Z,1513253328.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:49.082Z,1513253329.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:49.116Z,1513253329.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:49.495Z,1513253329.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:49.515Z,1513253329.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:49.892Z,1513253329.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:49.907Z,1513253329.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:50.354Z,1513253330.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:50.395Z,1513253330.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:50.668Z,1513253330.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:50.700Z,1513253330.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:51.082Z,1513253331.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:51.098Z,1513253331.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:51.482Z,1513253331.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:51.546Z,1513253331.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:51.883Z,1513253331.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:51.897Z,1513253331.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:52.278Z,1513253332.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:52.349Z,1513253332.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:52.680Z,1513253332.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:52.747Z,1513253332.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:53.079Z,1513253333.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:53.094Z,1513253333.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:53.488Z,1513253333.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:53.504Z,1513253333.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:53.889Z,1513253333.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:53.947Z,1513253333.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:54.292Z,1513253334.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:54.386Z,1513253334.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:54.664Z,1513253334.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:54.733Z,1513253334.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:55.080Z,1513253335.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:55.099Z,1513253335.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:55.468Z,1513253335.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:55.495Z,1513253335.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:55.865Z,1513253335.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:55.891Z,1513253335.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:56.292Z,1513253336.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:56.312Z,1513253336.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:56.708Z,1513253336.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:56.747Z,1513253336.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:57.091Z,1513253337.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:57.136Z,1513253337.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:57.489Z,1513253337.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:57.504Z,1513253337.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:57.880Z,1513253337.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:57.895Z,1513253337.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:58.332Z,1513253338.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:58.376Z,1513253338.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:58.674Z,1513253338.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:58.689Z,1513253338.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:59.087Z,1513253339.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:59.110Z,1513253339.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:59.492Z,1513253339.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:59.529Z,1513253339.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:08:59.893Z,1513253339.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:08:59.924Z,1513253339.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:00.331Z,1513253340.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:00.363Z,1513253340.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:00.664Z,1513253340.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:00.691Z,1513253340.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:01.090Z,1513253341.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:01.105Z,1513253341.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:01.490Z,1513253341.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:01.504Z,1513253341.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:01.881Z,1513253341.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:01.908Z,1513253341.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:02.339Z,1513253342.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:02.363Z,1513253342.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:02.671Z,1513253342.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:02.712Z,1513253342.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:03.093Z,1513253343.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:03.163Z,1513253343.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:03.490Z,1513253343.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:03.511Z,1513253343.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:03.896Z,1513253343.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:03.919Z,1513253343.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:04.325Z,1513253344.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:04.366Z,1513253344.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:04.667Z,1513253344.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:04.701Z,1513253344.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:05.097Z,1513253345.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:05.119Z,1513253345.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:05.494Z,1513253345.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:05.510Z,1513253345.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:05.891Z,1513253345.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:05.906Z,1513253345.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:06.279Z,1513253346.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:06.411Z,1513253346.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:06.669Z,1513253346.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:06.715Z,1513253346.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:07.070Z,1513253347.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:07.107Z,1513253347.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:07.490Z,1513253347.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:07.519Z,1513253347.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:07.879Z,1513253347.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:07.910Z,1513253347.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:08.286Z,1513253348.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:08.324Z,1513253348.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:08.674Z,1513253348.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:08.711Z,1513253348.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:09.080Z,1513253349.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:09.096Z,1513253349.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:09.479Z,1513253349.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:09.494Z,1513253349.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:09.874Z,1513253349.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:09.906Z,1513253349.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:10.286Z,1513253350.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:10.302Z,1513253350.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:10.687Z,1513253350.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:10.731Z,1513253350.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:11.095Z,1513253351.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:11.115Z,1513253351.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:11.481Z,1513253351.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:11.547Z,1513253351.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:11.884Z,1513253351.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:11.898Z,1513253351.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:12.332Z,1513253352.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:12.365Z,1513253352.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:12.669Z,1513253352.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:12.700Z,1513253352.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:13.101Z,1513253353.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:13.119Z,1513253353.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:13.491Z,1513253353.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:13.558Z,1513253353.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:13.896Z,1513253353.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:13.911Z,1513253353.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:14.325Z,1513253354.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:14.387Z,1513253354.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:14.685Z,1513253354.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:14.713Z,1513253354.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:15.091Z,1513253355.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:15.155Z,1513253355.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:15.490Z,1513253355.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:15.505Z,1513253355.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:15.892Z,1513253355.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:15.972Z,1513253355.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:16.001Z,1513253356.001 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:09:16.294Z,1513253356.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:16.350Z,1513253356.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:16.715Z,1513253356.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:16.783Z,1513253356.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:17.072Z,1513253357.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:17.116Z,1513253357.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:17.495Z,1513253357.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:17.510Z,1513253357.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:17.885Z,1513253357.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:17.905Z,1513253357.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:18.336Z,1513253358.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:18.377Z,1513253358.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:18.678Z,1513253358.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:18.703Z,1513253358.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.076Z,1513253359.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:19.092Z,1513253359.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.475Z,1513253359.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:19.495Z,1513253359.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.911Z,1513253359.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:19.936Z,1513253359.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.936Z,1513253359.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 232
2017-12-14T12:09:19.936Z,1513253359.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:09:19.942Z,1513253359.942 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.942Z,1513253359.942 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 232
2017-12-14T12:09:19.942Z,1513253359.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:09:19.944Z,1513253359.944 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:19.949Z,1513253359.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 232
2017-12-14T12:09:19.949Z,1513253359.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:09:19.990Z,1513253359.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:09:19.990Z,1513253359.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:09:19.991Z,1513253359.991 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:09:20.343Z,1513253360.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:20.415Z,1513253360.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:09:20.415Z,1513253360.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 232
2017-12-14T12:09:20.416Z,1513253360.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:09:20.416Z,1513253360.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 232
2017-12-14T12:09:20.416Z,1513253360.416 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:09:20.416Z,1513253360.416 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 232
2017-12-14T12:09:20.690Z,1513253360.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:20.704Z,1513253360.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:09:20.704Z,1513253360.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:09:20.704Z,1513253360.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:09:20.705Z,1513253360.705 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:09:20.705Z,1513253360.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:09:20.706Z,1513253360.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:09:20.706Z,1513253360.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:09:20.706Z,1513253360.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:09:20.707Z,1513253360.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:09:21.097Z,1513253361.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:21.112Z,1513253361.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:21.478Z,1513253361.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:21.507Z,1513253361.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:25.103Z,1513253365.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:25.161Z,1513253365.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:25.247Z,1513253365.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:25.287Z,1513253365.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:25.626Z,1513253365.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:25.661Z,1513253365.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:26.033Z,1513253366.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:26.061Z,1513253366.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:26.421Z,1513253366.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:26.444Z,1513253366.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:26.811Z,1513253366.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:26.843Z,1513253366.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:27.220Z,1513253367.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:27.235Z,1513253367.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:27.616Z,1513253367.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:27.631Z,1513253367.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:28.016Z,1513253368.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:28.032Z,1513253368.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:28.423Z,1513253368.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:28.443Z,1513253368.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:28.823Z,1513253368.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:28.848Z,1513253368.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:29.221Z,1513253369.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:29.243Z,1513253369.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:29.619Z,1513253369.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:29.677Z,1513253369.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:30.019Z,1513253370.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:30.035Z,1513253370.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:30.417Z,1513253370.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:30.432Z,1513253370.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:30.811Z,1513253370.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:30.872Z,1513253370.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:31.227Z,1513253371.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:31.248Z,1513253371.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:31.626Z,1513253371.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:31.647Z,1513253371.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:32.026Z,1513253372.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:32.047Z,1513253372.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:32.417Z,1513253372.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:32.439Z,1513253372.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:32.828Z,1513253372.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:32.847Z,1513253372.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:33.213Z,1513253373.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:33.236Z,1513253373.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:33.617Z,1513253373.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:33.632Z,1513253373.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:34.024Z,1513253374.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:34.039Z,1513253374.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:34.431Z,1513253374.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:34.446Z,1513253374.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:34.830Z,1513253374.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:34.851Z,1513253374.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:35.231Z,1513253375.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:35.251Z,1513253375.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:35.621Z,1513253375.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:35.636Z,1513253375.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:36.044Z,1513253376.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:36.088Z,1513253376.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:36.408Z,1513253376.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:36.443Z,1513253376.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:36.807Z,1513253376.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:36.875Z,1513253376.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:37.226Z,1513253377.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:37.252Z,1513253377.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:37.625Z,1513253377.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:37.652Z,1513253377.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:38.026Z,1513253378.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:38.092Z,1513253378.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:38.412Z,1513253378.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:38.427Z,1513253378.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:38.818Z,1513253378.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:38.874Z,1513253378.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:39.250Z,1513253379.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:39.281Z,1513253379.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:39.615Z,1513253379.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:39.634Z,1513253379.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:40.016Z,1513253380.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:40.031Z,1513253380.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:40.421Z,1513253380.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:40.437Z,1513253380.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:40.822Z,1513253380.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:40.837Z,1513253380.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:41.229Z,1513253381.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:41.261Z,1513253381.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:41.617Z,1513253381.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:41.632Z,1513253381.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:42.008Z,1513253382.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:42.028Z,1513253382.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:42.447Z,1513253382.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:42.487Z,1513253382.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:42.824Z,1513253382.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:42.840Z,1513253382.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:43.222Z,1513253383.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:43.243Z,1513253383.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:43.625Z,1513253383.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:43.639Z,1513253383.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:44.022Z,1513253384.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:44.037Z,1513253384.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:44.414Z,1513253384.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:44.429Z,1513253384.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:44.810Z,1513253384.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:44.843Z,1513253384.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:45.226Z,1513253385.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:45.241Z,1513253385.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:45.626Z,1513253385.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:45.673Z,1513253385.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:46.015Z,1513253386.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:46.035Z,1513253386.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:46.426Z,1513253386.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:46.440Z,1513253386.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:46.826Z,1513253386.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:46.841Z,1513253386.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:47.225Z,1513253387.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:47.266Z,1513253387.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:47.619Z,1513253387.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:47.635Z,1513253387.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:48.016Z,1513253388.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:48.031Z,1513253388.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:48.417Z,1513253388.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:48.435Z,1513253388.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:48.839Z,1513253388.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:48.875Z,1513253388.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:49.235Z,1513253389.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:49.250Z,1513253389.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:49.622Z,1513253389.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:49.655Z,1513253389.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:50.037Z,1513253390.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:50.051Z,1513253390.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:50.411Z,1513253390.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:50.446Z,1513253390.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:50.822Z,1513253390.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:50.848Z,1513253390.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:51.211Z,1513253391.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:51.242Z,1513253391.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:51.614Z,1513253391.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:51.637Z,1513253391.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:52.055Z,1513253392.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:52.106Z,1513253392.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:52.425Z,1513253392.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:52.454Z,1513253392.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:52.825Z,1513253392.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:52.850Z,1513253392.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:53.225Z,1513253393.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:53.255Z,1513253393.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:53.614Z,1513253393.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:53.629Z,1513253393.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:54.016Z,1513253394.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:54.055Z,1513253394.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:54.424Z,1513253394.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:54.459Z,1513253394.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:54.819Z,1513253394.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:54.862Z,1513253394.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:55.292Z,1513253395.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:55.319Z,1513253395.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:55.622Z,1513253395.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:55.637Z,1513253395.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:56.026Z,1513253396.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:56.041Z,1513253396.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:56.427Z,1513253396.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:56.442Z,1513253396.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:56.810Z,1513253396.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:56.843Z,1513253396.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:57.220Z,1513253397.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:57.236Z,1513253397.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:57.621Z,1513253397.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:57.636Z,1513253397.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:58.015Z,1513253398.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:58.031Z,1513253398.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:58.428Z,1513253398.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:58.452Z,1513253398.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:58.821Z,1513253398.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:58.886Z,1513253398.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:59.222Z,1513253399.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:59.268Z,1513253399.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:09:59.615Z,1513253399.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:09:59.642Z,1513253399.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:00.014Z,1513253400.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:00.067Z,1513253400.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:00.414Z,1513253400.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:00.453Z,1513253400.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:00.815Z,1513253400.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:00.872Z,1513253400.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:01.222Z,1513253401.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:01.253Z,1513253401.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:01.694Z,1513253401.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:01.850Z,1513253401.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:02.025Z,1513253402.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:02.053Z,1513253402.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:02.411Z,1513253402.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:02.431Z,1513253402.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:02.811Z,1513253402.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:02.830Z,1513253402.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:03.214Z,1513253403.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:03.241Z,1513253403.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:03.615Z,1513253403.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:03.631Z,1513253403.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:04.016Z,1513253404.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:04.032Z,1513253404.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:04.429Z,1513253404.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:04.459Z,1513253404.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:04.835Z,1513253404.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:04.864Z,1513253404.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:05.222Z,1513253405.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:05.243Z,1513253405.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:05.621Z,1513253405.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:05.636Z,1513253405.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:06.019Z,1513253406.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:06.035Z,1513253406.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:06.418Z,1513253406.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:06.434Z,1513253406.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:06.816Z,1513253406.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:06.831Z,1513253406.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:07.222Z,1513253407.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:07.237Z,1513253407.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:07.620Z,1513253407.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:07.639Z,1513253407.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:08.044Z,1513253408.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:08.077Z,1513253408.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:08.418Z,1513253408.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:08.432Z,1513253408.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:08.810Z,1513253408.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:08.834Z,1513253408.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:09.207Z,1513253409.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:09.275Z,1513253409.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:09.620Z,1513253409.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:09.635Z,1513253409.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:10.007Z,1513253410.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:10.039Z,1513253410.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:10.432Z,1513253410.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:10.447Z,1513253410.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:10.834Z,1513253410.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:10.849Z,1513253410.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:11.275Z,1513253411.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:11.308Z,1513253411.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:11.604Z,1513253411.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:11.628Z,1513253411.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:12.008Z,1513253412.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:12.042Z,1513253412.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:12.407Z,1513253412.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:12.444Z,1513253412.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:12.808Z,1513253412.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:12.833Z,1513253412.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:13.219Z,1513253413.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:13.239Z,1513253413.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:13.622Z,1513253413.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:13.636Z,1513253413.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:14.021Z,1513253414.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:14.083Z,1513253414.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:14.451Z,1513253414.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:14.497Z,1513253414.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:14.827Z,1513253414.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:14.847Z,1513253414.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:15.208Z,1513253415.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:15.243Z,1513253415.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:15.612Z,1513253415.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:15.638Z,1513253415.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:16.007Z,1513253416.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:16.044Z,1513253416.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:16.430Z,1513253416.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:16.445Z,1513253416.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:16.828Z,1513253416.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:16.847Z,1513253416.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:17.226Z,1513253417.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:17.241Z,1513253417.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:17.653Z,1513253417.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:17.696Z,1513253417.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:18.008Z,1513253418.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:18.043Z,1513253418.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:18.407Z,1513253418.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:18.432Z,1513253418.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:18.811Z,1513253418.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:18.825Z,1513253418.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:19.222Z,1513253419.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:19.237Z,1513253419.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:19.621Z,1513253419.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:19.643Z,1513253419.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:20.017Z,1513253420.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:20.025Z,1513253420.025 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T12:10:20.025Z,1513253420.025 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:10:20.025Z,1513253420.025 [BPC1](ERROR): Data Fault
2017-12-14T12:10:20.045Z,1513253420.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:20.084Z,1513253420.084 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:10:20.420Z,1513253420.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:20.435Z,1513253420.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:20.833Z,1513253420.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:20.868Z,1513253420.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:21.216Z,1513253421.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:21.235Z,1513253421.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:21.249Z,1513253421.249 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:10:21.249Z,1513253421.249 [BPC1] No Fault, FailCount= 1
2017-12-14T12:10:21.615Z,1513253421.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:21.691Z,1513253421.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:25.268Z,1513253425.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:25.283Z,1513253425.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:25.390Z,1513253425.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:25.432Z,1513253425.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:25.753Z,1513253425.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:25.783Z,1513253425.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:26.164Z,1513253426.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:26.180Z,1513253426.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:26.534Z,1513253426.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:26.557Z,1513253426.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:26.938Z,1513253426.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:26.956Z,1513253426.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:27.341Z,1513253427.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:27.355Z,1513253427.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:27.743Z,1513253427.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:27.758Z,1513253427.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:28.145Z,1513253428.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:28.167Z,1513253428.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:28.546Z,1513253428.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:28.567Z,1513253428.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:28.948Z,1513253428.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:28.964Z,1513253428.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:29.343Z,1513253429.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:29.358Z,1513253429.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:29.725Z,1513253429.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:29.772Z,1513253429.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:30.150Z,1513253430.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:30.165Z,1513253430.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:30.554Z,1513253430.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:30.571Z,1513253430.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:30.991Z,1513253430.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:31.100Z,1513253431.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:31.338Z,1513253431.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:31.358Z,1513253431.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:31.740Z,1513253431.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:31.759Z,1513253431.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:32.151Z,1513253432.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:32.166Z,1513253432.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:32.554Z,1513253432.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:32.571Z,1513253432.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:32.941Z,1513253432.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:32.977Z,1513253432.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:33.331Z,1513253433.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:33.346Z,1513253433.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:33.737Z,1513253433.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:33.752Z,1513253433.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:34.149Z,1513253434.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:34.180Z,1513253434.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:34.546Z,1513253434.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:34.560Z,1513253434.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:34.950Z,1513253434.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:34.975Z,1513253434.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:35.340Z,1513253435.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:35.355Z,1513253435.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:35.736Z,1513253435.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:35.750Z,1513253435.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:36.154Z,1513253436.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:36.178Z,1513253436.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:36.553Z,1513253436.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:36.595Z,1513253436.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:36.946Z,1513253436.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:36.961Z,1513253436.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:37.360Z,1513253437.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:37.391Z,1513253437.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:37.747Z,1513253437.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:37.762Z,1513253437.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:38.150Z,1513253438.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:38.165Z,1513253438.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:38.550Z,1513253438.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:38.564Z,1513253438.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:38.950Z,1513253438.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:38.964Z,1513253438.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:39.341Z,1513253439.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:39.356Z,1513253439.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:39.738Z,1513253439.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:39.760Z,1513253439.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:40.148Z,1513253440.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:40.163Z,1513253440.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:40.571Z,1513253440.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:40.603Z,1513253440.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:40.954Z,1513253440.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:40.969Z,1513253440.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:41.346Z,1513253441.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:41.361Z,1513253441.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:41.732Z,1513253441.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:41.792Z,1513253441.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:42.141Z,1513253442.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:42.203Z,1513253442.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:42.553Z,1513253442.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:42.576Z,1513253442.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:42.945Z,1513253442.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:42.967Z,1513253442.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:43.342Z,1513253443.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:43.391Z,1513253443.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:43.742Z,1513253443.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:43.843Z,1513253443.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:44.146Z,1513253444.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:44.191Z,1513253444.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:44.545Z,1513253444.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:44.561Z,1513253444.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:44.944Z,1513253444.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:44.967Z,1513253444.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:45.345Z,1513253445.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:45.360Z,1513253445.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:45.744Z,1513253445.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:45.759Z,1513253445.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:46.150Z,1513253446.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:46.171Z,1513253446.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:46.546Z,1513253446.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:46.560Z,1513253446.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:47.000Z,1513253447.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:47.038Z,1513253447.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:47.339Z,1513253447.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:47.376Z,1513253447.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:47.731Z,1513253447.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:47.745Z,1513253447.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:48.135Z,1513253448.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:48.150Z,1513253448.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:48.538Z,1513253448.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:48.552Z,1513253448.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:48.945Z,1513253448.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:48.959Z,1513253448.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:49.348Z,1513253449.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:49.364Z,1513253449.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:49.752Z,1513253449.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:49.771Z,1513253449.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:50.179Z,1513253450.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:50.274Z,1513253450.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:50.551Z,1513253450.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:50.587Z,1513253450.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:50.935Z,1513253450.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:50.962Z,1513253450.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:51.341Z,1513253451.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:51.355Z,1513253451.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:51.743Z,1513253451.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:51.758Z,1513253451.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:52.150Z,1513253452.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:52.165Z,1513253452.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:52.551Z,1513253452.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:52.592Z,1513253452.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:52.950Z,1513253452.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:52.967Z,1513253452.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:53.343Z,1513253453.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:53.371Z,1513253453.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:53.740Z,1513253453.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:53.769Z,1513253453.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:54.149Z,1513253454.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:54.174Z,1513253454.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:54.553Z,1513253454.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:54.583Z,1513253454.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:54.953Z,1513253454.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:54.983Z,1513253454.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:55.339Z,1513253455.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:55.354Z,1513253455.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:55.737Z,1513253455.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:55.753Z,1513253455.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:56.150Z,1513253456.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:56.178Z,1513253456.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:56.594Z,1513253456.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:56.637Z,1513253456.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:56.948Z,1513253456.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:56.979Z,1513253456.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:57.346Z,1513253457.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:57.361Z,1513253457.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:57.744Z,1513253457.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:57.760Z,1513253457.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:58.178Z,1513253458.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:58.203Z,1513253458.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:58.554Z,1513253458.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:58.570Z,1513253458.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:58.953Z,1513253458.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:58.969Z,1513253458.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:59.350Z,1513253459.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:59.365Z,1513253459.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:10:59.775Z,1513253459.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:10:59.823Z,1513253459.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:00.152Z,1513253460.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:00.167Z,1513253460.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:00.557Z,1513253460.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:00.572Z,1513253460.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:00.955Z,1513253460.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:00.971Z,1513253460.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:01.339Z,1513253461.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:01.367Z,1513253461.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:01.736Z,1513253461.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:01.760Z,1513253461.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:02.162Z,1513253462.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:02.177Z,1513253462.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:02.550Z,1513253462.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:02.575Z,1513253462.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:02.958Z,1513253462.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:02.995Z,1513253462.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:03.342Z,1513253463.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:03.358Z,1513253463.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:03.741Z,1513253463.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:03.750Z,1513253463.750 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T12:11:03.750Z,1513253463.750 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:11:03.750Z,1513253463.750 [BPC1](ERROR): Data Fault
2017-12-14T12:11:03.759Z,1513253463.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:03.792Z,1513253463.792 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:11:04.146Z,1513253464.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:04.162Z,1513253464.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:04.546Z,1513253464.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:04.567Z,1513253464.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:04.944Z,1513253464.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:04.960Z,1513253464.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:04.990Z,1513253464.990 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:11:04.990Z,1513253464.990 [BPC1] No Fault, FailCount= 1
2017-12-14T12:11:05.340Z,1513253465.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:05.413Z,1513253465.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:05.743Z,1513253465.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:05.758Z,1513253465.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:06.181Z,1513253466.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:06.200Z,1513253466.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:06.553Z,1513253466.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:06.578Z,1513253466.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:06.970Z,1513253466.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:06.991Z,1513253466.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:07.332Z,1513253467.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:07.351Z,1513253467.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:07.737Z,1513253467.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:07.752Z,1513253467.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:08.140Z,1513253468.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:08.154Z,1513253468.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:08.540Z,1513253468.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:08.555Z,1513253468.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:08.942Z,1513253468.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:08.957Z,1513253468.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:09.353Z,1513253469.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:09.386Z,1513253469.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:09.745Z,1513253469.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:09.760Z,1513253469.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:10.145Z,1513253470.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:10.160Z,1513253470.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:10.541Z,1513253470.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:10.556Z,1513253470.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:10.940Z,1513253470.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:10.955Z,1513253470.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:11.336Z,1513253471.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:11.359Z,1513253471.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:11.745Z,1513253471.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:11.759Z,1513253471.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:12.149Z,1513253472.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:12.165Z,1513253472.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:12.568Z,1513253472.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:12.596Z,1513253472.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:12.955Z,1513253472.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:12.975Z,1513253472.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:13.343Z,1513253473.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:13.358Z,1513253473.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:13.732Z,1513253473.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:13.789Z,1513253473.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:14.156Z,1513253474.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:14.171Z,1513253474.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:14.558Z,1513253474.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:14.572Z,1513253474.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:14.950Z,1513253474.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:15.094Z,1513253475.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:15.335Z,1513253475.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:15.370Z,1513253475.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:15.739Z,1513253475.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:15.828Z,1513253475.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:16.165Z,1513253476.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:16.180Z,1513253476.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:16.546Z,1513253476.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:16.646Z,1513253476.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:16.950Z,1513253476.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:16.983Z,1513253476.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:17.338Z,1513253477.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:17.353Z,1513253477.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:17.763Z,1513253477.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:17.807Z,1513253477.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:18.151Z,1513253478.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:18.178Z,1513253478.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:18.566Z,1513253478.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:18.587Z,1513253478.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:18.980Z,1513253478.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:19.051Z,1513253479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:19.338Z,1513253479.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:19.388Z,1513253479.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:19.748Z,1513253479.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:19.793Z,1513253479.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:20.138Z,1513253480.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:20.181Z,1513253480.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:20.542Z,1513253480.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:20.585Z,1513253480.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:20.934Z,1513253480.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:20.979Z,1513253480.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:21.354Z,1513253481.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:21.423Z,1513253481.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:21.784Z,1513253481.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:21.808Z,1513253481.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:27.679Z,1513253487.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:27.772Z,1513253487.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:27.890Z,1513253487.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:27.912Z,1513253487.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:28.266Z,1513253488.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:28.347Z,1513253488.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:28.716Z,1513253488.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:28.776Z,1513253488.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:29.094Z,1513253489.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:29.148Z,1513253489.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:29.474Z,1513253489.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:29.509Z,1513253489.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:29.875Z,1513253489.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:29.911Z,1513253489.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:30.272Z,1513253490.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:30.307Z,1513253490.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:30.691Z,1513253490.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:30.726Z,1513253490.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:31.077Z,1513253491.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:31.103Z,1513253491.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:31.458Z,1513253491.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:31.498Z,1513253491.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:31.887Z,1513253491.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:31.911Z,1513253491.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:32.332Z,1513253492.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:32.348Z,1513253492.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:32.671Z,1513253492.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:32.715Z,1513253492.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:33.080Z,1513253493.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:33.123Z,1513253493.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:33.474Z,1513253493.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:33.523Z,1513253493.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:33.857Z,1513253493.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:33.900Z,1513253493.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:34.339Z,1513253494.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:34.388Z,1513253494.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:34.677Z,1513253494.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:34.723Z,1513253494.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:35.074Z,1513253495.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:35.111Z,1513253495.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:35.480Z,1513253495.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:35.520Z,1513253495.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:35.878Z,1513253495.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:35.912Z,1513253495.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:36.319Z,1513253496.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:36.364Z,1513253496.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:36.656Z,1513253496.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:36.699Z,1513253496.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:37.071Z,1513253497.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:37.148Z,1513253497.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:37.471Z,1513253497.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:37.547Z,1513253497.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:37.940Z,1513253497.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:37.968Z,1513253497.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:38.306Z,1513253498.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:38.363Z,1513253498.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:38.666Z,1513253498.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:38.706Z,1513253498.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:39.071Z,1513253499.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:39.123Z,1513253499.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:39.472Z,1513253499.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:39.517Z,1513253499.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:39.871Z,1513253499.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:39.910Z,1513253499.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:40.280Z,1513253500.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:40.387Z,1513253500.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:40.678Z,1513253500.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:40.735Z,1513253500.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:41.058Z,1513253501.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:41.094Z,1513253501.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:41.458Z,1513253501.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:41.494Z,1513253501.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:41.856Z,1513253501.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:41.924Z,1513253501.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:42.275Z,1513253502.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:42.332Z,1513253502.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:42.697Z,1513253502.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:42.744Z,1513253502.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:43.066Z,1513253503.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:43.068Z,1513253503.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:43.140Z,1513253503.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:43.459Z,1513253503.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:43.496Z,1513253503.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:43.857Z,1513253503.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:43.861Z,1513253503.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:43.909Z,1513253503.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:44.276Z,1513253504.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:44.314Z,1513253504.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:44.675Z,1513253504.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:44.700Z,1513253504.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:45.081Z,1513253505.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:45.116Z,1513253505.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:45.480Z,1513253505.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:45.516Z,1513253505.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:45.880Z,1513253505.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:45.927Z,1513253505.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:46.333Z,1513253506.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:46.376Z,1513253506.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:46.656Z,1513253506.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:46.691Z,1513253506.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:47.063Z,1513253507.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:47.131Z,1513253507.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:47.494Z,1513253507.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:47.532Z,1513253507.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:47.856Z,1513253507.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:47.872Z,1513253507.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:48.330Z,1513253508.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:48.359Z,1513253508.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:48.727Z,1513253508.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:48.754Z,1513253508.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:49.095Z,1513253509.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:49.115Z,1513253509.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:49.467Z,1513253509.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:49.515Z,1513253509.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:49.861Z,1513253509.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:49.926Z,1513253509.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:50.293Z,1513253510.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:50.328Z,1513253510.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:50.656Z,1513253510.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:50.682Z,1513253510.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:51.055Z,1513253511.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:51.104Z,1513253511.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:51.502Z,1513253511.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:51.525Z,1513253511.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:51.866Z,1513253511.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:51.939Z,1513253511.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:52.311Z,1513253512.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:52.338Z,1513253512.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:52.663Z,1513253512.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:52.678Z,1513253512.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:53.060Z,1513253513.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:53.076Z,1513253513.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:53.467Z,1513253513.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:53.483Z,1513253513.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:53.862Z,1513253513.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:53.876Z,1513253513.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:54.266Z,1513253514.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:54.282Z,1513253514.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:54.672Z,1513253514.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:54.687Z,1513253514.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:55.093Z,1513253515.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:55.215Z,1513253515.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:55.465Z,1513253515.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:55.503Z,1513253515.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:55.862Z,1513253515.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:55.876Z,1513253515.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:56.263Z,1513253516.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:56.278Z,1513253516.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:56.686Z,1513253516.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:56.713Z,1513253516.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:57.074Z,1513253517.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:57.216Z,1513253517.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:57.252Z,1513253517.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:57.473Z,1513253517.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:57.513Z,1513253517.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:57.657Z,1513253517.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:57.873Z,1513253517.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:57.888Z,1513253517.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:58.061Z,1513253518.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:58.276Z,1513253518.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:58.290Z,1513253518.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:58.685Z,1513253518.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:58.713Z,1513253518.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:59.063Z,1513253519.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:59.078Z,1513253519.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:59.464Z,1513253519.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:59.480Z,1513253519.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:11:59.863Z,1513253519.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:11:59.877Z,1513253519.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:00.317Z,1513253520.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:00.371Z,1513253520.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:00.673Z,1513253520.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:00.703Z,1513253520.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:01.082Z,1513253521.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:01.115Z,1513253521.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:01.471Z,1513253521.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:01.507Z,1513253521.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:01.865Z,1513253521.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:01.904Z,1513253521.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:02.328Z,1513253522.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:02.363Z,1513253522.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:02.660Z,1513253522.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:02.685Z,1513253522.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:03.073Z,1513253523.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:03.088Z,1513253523.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:03.477Z,1513253523.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:03.491Z,1513253523.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:03.865Z,1513253523.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:03.880Z,1513253523.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:04.320Z,1513253524.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:04.343Z,1513253524.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:04.676Z,1513253524.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:04.720Z,1513253524.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:05.070Z,1513253525.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:05.127Z,1513253525.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:05.473Z,1513253525.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:05.487Z,1513253525.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:05.872Z,1513253525.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:05.887Z,1513253525.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:06.270Z,1513253526.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:06.341Z,1513253526.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:06.674Z,1513253526.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:06.689Z,1513253526.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:07.068Z,1513253527.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:07.082Z,1513253527.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:07.476Z,1513253527.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:07.492Z,1513253527.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:07.928Z,1513253527.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:07.948Z,1513253527.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:08.286Z,1513253528.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:08.387Z,1513253528.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:08.672Z,1513253528.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:08.688Z,1513253528.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:09.064Z,1513253529.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:09.084Z,1513253529.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:09.470Z,1513253529.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:09.484Z,1513253529.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:09.867Z,1513253529.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:09.887Z,1513253529.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:10.271Z,1513253530.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:10.286Z,1513253530.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:10.704Z,1513253530.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:10.719Z,1513253530.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:11.111Z,1513253531.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:11.139Z,1513253531.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:11.467Z,1513253531.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:11.483Z,1513253531.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:11.867Z,1513253531.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:11.882Z,1513253531.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:12.271Z,1513253532.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:12.327Z,1513253532.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:12.697Z,1513253532.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:12.740Z,1513253532.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:13.067Z,1513253533.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:13.090Z,1513253533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:13.477Z,1513253533.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:13.499Z,1513253533.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:13.878Z,1513253533.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:13.927Z,1513253533.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:14.328Z,1513253534.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:14.411Z,1513253534.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:14.671Z,1513253534.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:14.726Z,1513253534.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:15.070Z,1513253535.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:15.085Z,1513253535.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:15.472Z,1513253535.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:15.488Z,1513253535.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:15.865Z,1513253535.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:15.880Z,1513253535.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:16.332Z,1513253536.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:16.358Z,1513253536.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:16.689Z,1513253536.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:16.704Z,1513253536.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:17.078Z,1513253537.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:17.096Z,1513253537.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:17.455Z,1513253537.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:17.481Z,1513253537.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:17.876Z,1513253537.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:17.891Z,1513253537.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:18.316Z,1513253538.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:18.356Z,1513253538.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:18.655Z,1513253538.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:18.691Z,1513253538.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:19.086Z,1513253539.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:19.107Z,1513253539.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:19.478Z,1513253539.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:19.493Z,1513253539.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:19.869Z,1513253539.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:19.901Z,1513253539.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:20.312Z,1513253540.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:20.343Z,1513253540.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:20.655Z,1513253540.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:20.670Z,1513253540.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:21.086Z,1513253541.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:21.101Z,1513253541.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:21.101Z,1513253541.101 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 233
2017-12-14T12:12:21.101Z,1513253541.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:12:21.103Z,1513253541.103 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:21.103Z,1513253541.103 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 233
2017-12-14T12:12:21.103Z,1513253541.103 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:12:21.105Z,1513253541.105 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:21.105Z,1513253541.105 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 233
2017-12-14T12:12:21.105Z,1513253541.105 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:12:21.118Z,1513253541.118 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:12:21.118Z,1513253541.118 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:12:21.119Z,1513253541.119 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:12:21.487Z,1513253541.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:21.512Z,1513253541.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:12:21.512Z,1513253541.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 233
2017-12-14T12:12:21.537Z,1513253541.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:12:21.537Z,1513253541.537 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 233
2017-12-14T12:12:21.538Z,1513253541.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:12:21.538Z,1513253541.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 233
2017-12-14T12:12:21.874Z,1513253541.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:21.904Z,1513253541.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:12:21.905Z,1513253541.905 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:12:21.905Z,1513253541.905 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:12:21.906Z,1513253541.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:12:21.906Z,1513253541.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:12:21.906Z,1513253541.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:12:21.907Z,1513253541.907 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:12:21.907Z,1513253541.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:12:21.907Z,1513253541.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:12:25.340Z,1513253545.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:25.388Z,1513253545.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:25.535Z,1513253545.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:25.607Z,1513253545.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:25.885Z,1513253545.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:25.914Z,1513253545.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:26.299Z,1513253546.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:26.314Z,1513253546.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:26.691Z,1513253546.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:26.726Z,1513253546.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:27.075Z,1513253547.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:27.097Z,1513253547.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:27.474Z,1513253547.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:27.494Z,1513253547.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:27.871Z,1513253547.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:27.928Z,1513253547.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:28.343Z,1513253548.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:28.360Z,1513253548.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:28.683Z,1513253548.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:28.707Z,1513253548.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:29.088Z,1513253549.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:29.103Z,1513253549.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:29.475Z,1513253549.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:29.491Z,1513253549.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:29.872Z,1513253549.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:29.889Z,1513253549.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:30.330Z,1513253550.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:30.358Z,1513253550.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:30.685Z,1513253550.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:30.712Z,1513253550.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:31.138Z,1513253551.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:31.159Z,1513253551.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:31.487Z,1513253551.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:31.503Z,1513253551.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:31.882Z,1513253551.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:31.902Z,1513253551.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:32.337Z,1513253552.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:32.382Z,1513253552.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:32.669Z,1513253552.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:32.700Z,1513253552.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:33.082Z,1513253553.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:33.157Z,1513253553.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:33.477Z,1513253553.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:33.508Z,1513253553.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:33.882Z,1513253553.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:33.910Z,1513253553.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:34.356Z,1513253554.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:34.405Z,1513253554.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:34.679Z,1513253554.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:34.718Z,1513253554.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:35.086Z,1513253555.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:35.112Z,1513253555.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:35.489Z,1513253555.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:35.519Z,1513253555.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:35.881Z,1513253555.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:35.919Z,1513253555.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:36.271Z,1513253556.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:36.355Z,1513253556.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:36.672Z,1513253556.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:36.693Z,1513253556.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:37.071Z,1513253557.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:37.107Z,1513253557.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:37.486Z,1513253557.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:37.591Z,1513253557.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:37.890Z,1513253557.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:37.923Z,1513253557.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:38.286Z,1513253558.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:38.335Z,1513253558.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:38.677Z,1513253558.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:38.725Z,1513253558.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:39.073Z,1513253559.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:39.120Z,1513253559.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:39.474Z,1513253559.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:39.488Z,1513253559.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:39.874Z,1513253559.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:39.889Z,1513253559.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:40.274Z,1513253560.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:40.289Z,1513253560.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:40.679Z,1513253560.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:40.741Z,1513253560.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:41.082Z,1513253561.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:41.097Z,1513253561.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:41.472Z,1513253561.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:41.487Z,1513253561.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:41.868Z,1513253561.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:41.883Z,1513253561.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:42.318Z,1513253562.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:42.359Z,1513253562.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:42.683Z,1513253562.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:42.697Z,1513253562.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:43.086Z,1513253563.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:43.101Z,1513253563.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:43.486Z,1513253563.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:43.500Z,1513253563.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:43.918Z,1513253563.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:43.958Z,1513253563.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:44.316Z,1513253564.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:44.346Z,1513253564.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:44.670Z,1513253564.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:44.699Z,1513253564.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:45.090Z,1513253565.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:45.111Z,1513253565.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:45.489Z,1513253565.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:45.504Z,1513253565.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:45.886Z,1513253565.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:45.901Z,1513253565.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:46.334Z,1513253566.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:46.361Z,1513253566.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:46.661Z,1513253566.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:46.696Z,1513253566.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:47.109Z,1513253567.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:47.187Z,1513253567.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:47.487Z,1513253567.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:47.507Z,1513253567.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:47.887Z,1513253567.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:47.903Z,1513253567.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:48.334Z,1513253568.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:48.358Z,1513253568.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:48.663Z,1513253568.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:48.703Z,1513253568.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:49.121Z,1513253569.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:49.144Z,1513253569.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:49.491Z,1513253569.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:49.511Z,1513253569.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:49.888Z,1513253569.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:49.903Z,1513253569.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:50.257Z,1513253570.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:50.272Z,1513253570.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:50.673Z,1513253570.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:50.698Z,1513253570.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:51.073Z,1513253571.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:51.088Z,1513253571.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:51.482Z,1513253571.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:51.499Z,1513253571.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:51.883Z,1513253571.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:51.898Z,1513253571.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:52.280Z,1513253572.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:52.294Z,1513253572.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:52.687Z,1513253572.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:52.702Z,1513253572.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:53.076Z,1513253573.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:53.092Z,1513253573.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:53.470Z,1513253573.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:53.492Z,1513253573.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:53.870Z,1513253573.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:53.898Z,1513253573.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:54.278Z,1513253574.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:54.294Z,1513253574.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:54.682Z,1513253574.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:54.725Z,1513253574.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:55.077Z,1513253575.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:55.099Z,1513253575.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:55.474Z,1513253575.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:55.489Z,1513253575.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:55.871Z,1513253575.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:55.887Z,1513253575.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:56.324Z,1513253576.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:56.366Z,1513253576.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:56.700Z,1513253576.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:56.767Z,1513253576.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:57.074Z,1513253577.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:57.095Z,1513253577.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:57.477Z,1513253577.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:57.492Z,1513253577.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:57.886Z,1513253577.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:57.917Z,1513253577.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:58.321Z,1513253578.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:58.338Z,1513253578.338 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T12:12:58.338Z,1513253578.338 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:12:58.338Z,1513253578.338 [BPC1](ERROR): Data Fault
2017-12-14T12:12:58.372Z,1513253578.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:58.398Z,1513253578.398 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:12:58.680Z,1513253578.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:58.695Z,1513253578.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:59.083Z,1513253579.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:59.106Z,1513253579.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:59.488Z,1513253579.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:12:59.512Z,1513253579.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:12:59.560Z,1513253579.560 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:12:59.560Z,1513253579.560 [BPC1] No Fault, FailCount= 1
2017-12-14T12:12:59.905Z,1513253579.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:00.023Z,1513253580.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:00.317Z,1513253580.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:00.361Z,1513253580.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:00.673Z,1513253580.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:00.696Z,1513253580.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:01.082Z,1513253581.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:01.097Z,1513253581.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:01.482Z,1513253581.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:01.496Z,1513253581.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:01.883Z,1513253581.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:01.905Z,1513253581.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:02.324Z,1513253582.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:02.348Z,1513253582.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:02.672Z,1513253582.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:02.687Z,1513253582.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:03.103Z,1513253583.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:03.130Z,1513253583.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:03.477Z,1513253583.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:03.491Z,1513253583.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:03.876Z,1513253583.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:03.899Z,1513253583.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:04.289Z,1513253584.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:04.356Z,1513253584.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:04.682Z,1513253584.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:04.697Z,1513253584.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:05.101Z,1513253585.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:05.131Z,1513253585.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:05.481Z,1513253585.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:05.504Z,1513253585.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:05.887Z,1513253585.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:05.901Z,1513253585.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:06.282Z,1513253586.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:06.325Z,1513253586.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:06.700Z,1513253586.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:06.719Z,1513253586.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:07.066Z,1513253587.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:07.080Z,1513253587.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:07.468Z,1513253587.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:07.484Z,1513253587.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:07.871Z,1513253587.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:07.886Z,1513253587.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:08.281Z,1513253588.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:08.321Z,1513253588.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:08.692Z,1513253588.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:08.731Z,1513253588.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:09.082Z,1513253589.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:09.117Z,1513253589.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:09.524Z,1513253589.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:09.586Z,1513253589.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:09.872Z,1513253589.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:09.887Z,1513253589.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:10.316Z,1513253590.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:10.336Z,1513253590.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:10.678Z,1513253590.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:10.705Z,1513253590.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:11.088Z,1513253591.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:11.102Z,1513253591.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:11.487Z,1513253591.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:11.507Z,1513253591.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:11.892Z,1513253591.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:11.906Z,1513253591.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:12.332Z,1513253592.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:12.360Z,1513253592.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:12.665Z,1513253592.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:12.705Z,1513253592.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:13.092Z,1513253593.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:13.106Z,1513253593.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:13.494Z,1513253593.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:13.533Z,1513253593.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:13.886Z,1513253593.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:13.915Z,1513253593.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:14.319Z,1513253594.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:14.377Z,1513253594.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:14.674Z,1513253594.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:14.704Z,1513253594.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:15.084Z,1513253595.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:15.099Z,1513253595.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:15.486Z,1513253595.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:15.507Z,1513253595.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:15.887Z,1513253595.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:15.907Z,1513253595.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:16.320Z,1513253596.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:16.360Z,1513253596.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:16.694Z,1513253596.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:16.730Z,1513253596.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:17.089Z,1513253597.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:17.105Z,1513253597.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:17.489Z,1513253597.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:17.504Z,1513253597.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:17.888Z,1513253597.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:17.903Z,1513253597.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:18.273Z,1513253598.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:18.360Z,1513253598.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:18.671Z,1513253598.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:18.719Z,1513253598.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:19.067Z,1513253599.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:19.102Z,1513253599.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:19.486Z,1513253599.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:19.508Z,1513253599.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:19.892Z,1513253599.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:19.916Z,1513253599.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:20.287Z,1513253600.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:20.385Z,1513253600.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:20.674Z,1513253600.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:20.715Z,1513253600.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:21.073Z,1513253601.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:21.089Z,1513253601.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:21.092Z,1513253601.092 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:13:21.092Z,1513253601.092 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:13:21.092Z,1513253601.092 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:13:21.093Z,1513253601.093 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:13:21.473Z,1513253601.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:21.520Z,1513253601.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:21.523Z,1513253601.523 [Default:CheckIn:D] Stopped
2017-12-14T12:13:21.523Z,1513253601.523 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:13:21.875Z,1513253601.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:21.895Z,1513253601.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 700.102214 min 
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn:E] Stopped
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn] Stopped
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:13:21.899Z,1513253601.899 [Default:CheckIn](INFO): Running loop #68
2017-12-14T12:13:21.900Z,1513253601.900 [Default:CheckIn] Running Loop=68
2017-12-14T12:13:21.900Z,1513253601.900 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:13:21.900Z,1513253601.900 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:13:22.283Z,1513253602.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:22.331Z,1513253602.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:25.806Z,1513253605.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:25.848Z,1513253605.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:25.954Z,1513253605.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:25.995Z,1513253605.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:26.352Z,1513253606.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:26.391Z,1513253606.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:26.732Z,1513253606.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:26.753Z,1513253606.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:27.129Z,1513253607.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:27.151Z,1513253607.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:27.537Z,1513253607.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:27.552Z,1513253607.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:27.931Z,1513253607.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:27.951Z,1513253607.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:28.334Z,1513253608.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:28.358Z,1513253608.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:28.724Z,1513253608.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:28.739Z,1513253608.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:29.137Z,1513253609.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:29.152Z,1513253609.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:29.585Z,1513253609.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:29.604Z,1513253609.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:29.936Z,1513253609.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:29.951Z,1513253609.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:30.341Z,1513253610.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:30.384Z,1513253610.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:30.711Z,1513253610.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:30.748Z,1513253610.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:31.134Z,1513253611.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:31.151Z,1513253611.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:31.535Z,1513253611.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:31.550Z,1513253611.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:31.934Z,1513253611.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:31.950Z,1513253611.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:32.372Z,1513253612.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:32.408Z,1513253612.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:32.715Z,1513253612.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:32.744Z,1513253612.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:33.135Z,1513253613.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:33.150Z,1513253613.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:33.537Z,1513253613.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:33.556Z,1513253613.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:33.925Z,1513253613.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:33.940Z,1513253613.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:34.314Z,1513253614.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:34.337Z,1513253614.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:34.723Z,1513253614.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:34.738Z,1513253614.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:35.129Z,1513253615.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:35.144Z,1513253615.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:35.530Z,1513253615.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:35.544Z,1513253615.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:35.924Z,1513253615.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:35.944Z,1513253615.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:36.323Z,1513253616.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:36.337Z,1513253616.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:36.749Z,1513253616.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:36.772Z,1513253616.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:37.130Z,1513253617.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:37.151Z,1513253617.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:37.534Z,1513253617.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:37.570Z,1513253617.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:37.934Z,1513253617.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:37.949Z,1513253617.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:38.336Z,1513253618.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:38.380Z,1513253618.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:38.715Z,1513253618.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:38.738Z,1513253618.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:39.134Z,1513253619.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:39.151Z,1513253619.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:39.534Z,1513253619.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:39.551Z,1513253619.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:39.959Z,1513253619.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:40.002Z,1513253620.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:40.329Z,1513253620.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:40.375Z,1513253620.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:40.711Z,1513253620.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:40.743Z,1513253620.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:41.115Z,1513253621.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:41.147Z,1513253621.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:41.516Z,1513253621.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:41.542Z,1513253621.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:41.912Z,1513253621.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:41.938Z,1513253621.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:42.346Z,1513253622.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:42.399Z,1513253622.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:42.734Z,1513253622.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:42.857Z,1513253622.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:43.157Z,1513253623.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:43.193Z,1513253623.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:43.511Z,1513253623.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:43.543Z,1513253623.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:43.916Z,1513253623.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:43.943Z,1513253623.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:44.335Z,1513253624.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:44.359Z,1513253624.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:44.715Z,1513253624.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:44.743Z,1513253624.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:45.134Z,1513253625.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:45.150Z,1513253625.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:45.538Z,1513253625.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:45.547Z,1513253625.547 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:13:45.547Z,1513253625.547 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:13:45.547Z,1513253625.547 [BPC1](ERROR): Communications Fault
2017-12-14T12:13:45.563Z,1513253625.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:45.604Z,1513253625.604 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:13:45.935Z,1513253625.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:45.950Z,1513253625.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:46.393Z,1513253626.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:46.454Z,1513253626.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:46.728Z,1513253626.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:46.759Z,1513253626.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:46.772Z,1513253626.772 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:13:46.772Z,1513253626.772 [BPC1] No Fault, FailCount= 1
2017-12-14T12:13:47.143Z,1513253627.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:47.207Z,1513253627.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:47.527Z,1513253627.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:47.552Z,1513253627.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:47.931Z,1513253627.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:47.963Z,1513253627.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:48.320Z,1513253628.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:48.360Z,1513253628.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:48.712Z,1513253628.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:48.732Z,1513253628.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:49.132Z,1513253629.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:49.167Z,1513253629.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:49.534Z,1513253629.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:49.562Z,1513253629.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:49.922Z,1513253629.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:49.946Z,1513253629.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:50.322Z,1513253630.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:50.337Z,1513253630.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:50.719Z,1513253630.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:50.734Z,1513253630.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:51.126Z,1513253631.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:51.140Z,1513253631.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:51.526Z,1513253631.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:51.564Z,1513253631.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:51.935Z,1513253631.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:51.973Z,1513253631.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:52.329Z,1513253632.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:52.368Z,1513253632.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:52.748Z,1513253632.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:52.768Z,1513253632.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:53.136Z,1513253633.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:53.175Z,1513253633.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:53.534Z,1513253633.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:53.551Z,1513253633.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:53.933Z,1513253633.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:53.948Z,1513253633.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:54.333Z,1513253634.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:54.376Z,1513253634.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:54.723Z,1513253634.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:54.743Z,1513253634.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:55.134Z,1513253635.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:55.150Z,1513253635.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:55.534Z,1513253635.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:55.573Z,1513253635.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:55.934Z,1513253635.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:55.951Z,1513253635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:56.332Z,1513253636.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:56.384Z,1513253636.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:56.711Z,1513253636.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:56.738Z,1513253636.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:57.135Z,1513253637.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:57.151Z,1513253637.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:57.542Z,1513253637.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:57.563Z,1513253637.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:57.936Z,1513253637.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:57.951Z,1513253637.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:58.338Z,1513253638.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:58.363Z,1513253638.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:58.738Z,1513253638.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:58.794Z,1513253638.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:59.098Z,1513253639.098 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:13:59.099Z,1513253639.099 [NAL9602] Data Fault, FailCount= 4
2017-12-14T12:13:59.099Z,1513253639.099 [NAL9602](ERROR): Data Fault
2017-12-14T12:13:59.115Z,1513253639.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:59.151Z,1513253639.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:59.164Z,1513253639.164 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:13:59.494Z,1513253639.494 [NAL9602](INFO): Powering down
2017-12-14T12:13:59.513Z,1513253639.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:59.608Z,1513253639.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:13:59.920Z,1513253639.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:13:59.935Z,1513253639.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:00.369Z,1513253640.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:00.410Z,1513253640.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:00.423Z,1513253640.423 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:14:00.423Z,1513253640.423 [NAL9602] No Fault, FailCount= 4
2017-12-14T12:14:00.715Z,1513253640.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:00.734Z,1513253640.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:01.117Z,1513253641.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:01.132Z,1513253641.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:01.520Z,1513253641.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:01.535Z,1513253641.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:01.916Z,1513253641.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:01.931Z,1513253641.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:02.320Z,1513253642.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:02.335Z,1513253642.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:02.756Z,1513253642.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:02.776Z,1513253642.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:03.131Z,1513253643.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:03.162Z,1513253643.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:03.521Z,1513253643.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:03.536Z,1513253643.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:03.819Z,1513253643.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:03.921Z,1513253643.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:03.936Z,1513253643.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:04.321Z,1513253644.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:04.336Z,1513253644.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:04.615Z,1513253644.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:04.720Z,1513253644.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:04.738Z,1513253644.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:05.030Z,1513253645.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:05.118Z,1513253645.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:05.134Z,1513253645.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:05.520Z,1513253645.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:05.539Z,1513253645.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:05.958Z,1513253645.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:06.023Z,1513253646.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:06.336Z,1513253646.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:06.375Z,1513253646.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:06.722Z,1513253646.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:06.737Z,1513253646.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:07.116Z,1513253647.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:07.139Z,1513253647.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:07.523Z,1513253647.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:07.578Z,1513253647.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:07.923Z,1513253647.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:07.939Z,1513253647.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:08.329Z,1513253648.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:08.378Z,1513253648.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:08.724Z,1513253648.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:08.747Z,1513253648.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:09.110Z,1513253649.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:09.170Z,1513253649.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:09.533Z,1513253649.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:09.549Z,1513253649.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:09.908Z,1513253649.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:09.947Z,1513253649.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:10.321Z,1513253650.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:10.361Z,1513253650.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:10.710Z,1513253650.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:10.748Z,1513253650.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:11.110Z,1513253651.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:11.146Z,1513253651.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:11.508Z,1513253651.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:11.524Z,1513253651.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:11.914Z,1513253651.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:11.953Z,1513253651.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:12.391Z,1513253652.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:12.446Z,1513253652.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:12.715Z,1513253652.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:12.750Z,1513253652.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:13.111Z,1513253653.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:13.151Z,1513253653.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:13.515Z,1513253653.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:13.529Z,1513253653.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:13.905Z,1513253653.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:13.926Z,1513253653.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:14.368Z,1513253654.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:14.407Z,1513253654.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:14.718Z,1513253654.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:14.738Z,1513253654.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:15.123Z,1513253655.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:15.138Z,1513253655.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:15.539Z,1513253655.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:15.570Z,1513253655.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:15.915Z,1513253655.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:15.946Z,1513253655.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:16.304Z,1513253656.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:16.331Z,1513253656.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:16.732Z,1513253656.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:16.791Z,1513253656.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:17.123Z,1513253657.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:17.138Z,1513253657.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:17.519Z,1513253657.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:17.539Z,1513253657.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:17.813Z,1513253657.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:17.919Z,1513253657.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:17.934Z,1513253657.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:18.322Z,1513253658.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:18.336Z,1513253658.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:18.612Z,1513253658.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:18.736Z,1513253658.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:18.775Z,1513253658.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:19.029Z,1513253659.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:19.120Z,1513253659.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:19.143Z,1513253659.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:19.523Z,1513253659.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:19.537Z,1513253659.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:19.826Z,1513253659.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:19.921Z,1513253659.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:19.936Z,1513253659.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:20.332Z,1513253660.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:20.374Z,1513253660.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:20.621Z,1513253660.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:20.731Z,1513253660.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:20.751Z,1513253660.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:21.025Z,1513253661.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:21.121Z,1513253661.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:21.136Z,1513253661.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:21.515Z,1513253661.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:21.535Z,1513253661.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:21.949Z,1513253661.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:21.975Z,1513253661.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:22.325Z,1513253662.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:22.371Z,1513253662.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:25.830Z,1513253665.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:25.869Z,1513253665.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:25.966Z,1513253665.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:25.999Z,1513253665.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:26.341Z,1513253666.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:26.385Z,1513253666.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:26.740Z,1513253666.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:26.779Z,1513253666.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:27.143Z,1513253667.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:27.176Z,1513253667.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:27.538Z,1513253667.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:27.606Z,1513253667.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:27.941Z,1513253667.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:27.959Z,1513253667.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:28.405Z,1513253668.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:28.451Z,1513253668.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:28.744Z,1513253668.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:28.759Z,1513253668.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:29.144Z,1513253669.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:29.219Z,1513253669.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:29.522Z,1513253669.522 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:14:29.555Z,1513253669.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:29.571Z,1513253669.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:29.947Z,1513253669.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:30.003Z,1513253670.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:30.346Z,1513253670.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:30.361Z,1513253670.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:30.742Z,1513253670.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:30.791Z,1513253670.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:31.148Z,1513253671.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:31.162Z,1513253671.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:31.538Z,1513253671.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:31.558Z,1513253671.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:31.841Z,1513253671.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:31.935Z,1513253671.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:31.959Z,1513253671.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:32.338Z,1513253672.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:32.378Z,1513253672.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:32.638Z,1513253672.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:32.735Z,1513253672.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:32.751Z,1513253672.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:33.041Z,1513253673.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:33.138Z,1513253673.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:33.154Z,1513253673.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:33.542Z,1513253673.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:33.557Z,1513253673.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:33.936Z,1513253673.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:33.951Z,1513253673.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:34.336Z,1513253674.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:34.351Z,1513253674.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:34.740Z,1513253674.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:34.806Z,1513253674.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:35.139Z,1513253675.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:35.172Z,1513253675.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:35.544Z,1513253675.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:35.560Z,1513253675.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:35.940Z,1513253675.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:35.955Z,1513253675.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:36.341Z,1513253676.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:36.359Z,1513253676.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:36.739Z,1513253676.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:36.755Z,1513253676.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:37.143Z,1513253677.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:37.158Z,1513253677.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:37.548Z,1513253677.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:37.562Z,1513253677.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:37.959Z,1513253677.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:37.994Z,1513253677.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:38.336Z,1513253678.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:38.373Z,1513253678.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:38.739Z,1513253678.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:38.771Z,1513253678.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:39.138Z,1513253679.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:39.195Z,1513253679.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:39.538Z,1513253679.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:39.571Z,1513253679.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:39.933Z,1513253679.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:39.948Z,1513253679.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:40.347Z,1513253680.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:40.374Z,1513253680.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:40.718Z,1513253680.718 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:14:40.735Z,1513253680.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:40.751Z,1513253680.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:41.183Z,1513253681.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:41.238Z,1513253681.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:41.546Z,1513253681.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:41.581Z,1513253681.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:41.958Z,1513253681.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:41.982Z,1513253681.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:42.398Z,1513253682.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:42.412Z,1513253682.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:42.743Z,1513253682.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:42.782Z,1513253682.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:43.144Z,1513253683.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:43.160Z,1513253683.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:43.541Z,1513253683.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:43.556Z,1513253683.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:43.948Z,1513253683.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:43.964Z,1513253683.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:44.378Z,1513253684.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:44.432Z,1513253684.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:44.758Z,1513253684.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:44.789Z,1513253684.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:45.140Z,1513253685.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:45.167Z,1513253685.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:45.544Z,1513253685.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:45.559Z,1513253685.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:45.824Z,1513253685.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:45.946Z,1513253685.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:45.961Z,1513253685.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:46.347Z,1513253686.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:46.362Z,1513253686.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:46.619Z,1513253686.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:46.751Z,1513253686.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:46.771Z,1513253686.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:47.037Z,1513253687.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:47.154Z,1513253687.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:47.169Z,1513253687.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:47.623Z,1513253687.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:47.675Z,1513253687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:47.834Z,1513253687.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:47.951Z,1513253687.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:47.966Z,1513253687.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:48.335Z,1513253688.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:48.351Z,1513253688.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:48.630Z,1513253688.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:48.735Z,1513253688.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:48.763Z,1513253688.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:49.033Z,1513253689.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:49.144Z,1513253689.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:49.177Z,1513253689.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:49.540Z,1513253689.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:49.556Z,1513253689.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:49.958Z,1513253689.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:50.007Z,1513253690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:50.362Z,1513253690.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:50.387Z,1513253690.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:50.750Z,1513253690.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:50.765Z,1513253690.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:51.146Z,1513253691.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:51.161Z,1513253691.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:51.543Z,1513253691.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:51.609Z,1513253691.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:51.941Z,1513253691.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:51.971Z,1513253691.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:52.338Z,1513253692.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:52.369Z,1513253692.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:52.735Z,1513253692.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:52.783Z,1513253692.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:53.165Z,1513253693.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:53.179Z,1513253693.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:53.560Z,1513253693.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:53.619Z,1513253693.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:53.954Z,1513253693.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:53.980Z,1513253693.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:54.337Z,1513253694.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:54.372Z,1513253694.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:54.735Z,1513253694.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:54.811Z,1513253694.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:55.160Z,1513253695.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:55.175Z,1513253695.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:55.547Z,1513253695.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:55.573Z,1513253695.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:55.959Z,1513253695.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:55.978Z,1513253695.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:56.387Z,1513253696.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:56.402Z,1513253696.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:56.754Z,1513253696.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:56.782Z,1513253696.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:57.135Z,1513253697.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:57.152Z,1513253697.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:57.542Z,1513253697.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:57.558Z,1513253697.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:57.990Z,1513253697.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:58.032Z,1513253698.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:58.340Z,1513253698.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:58.356Z,1513253698.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:58.758Z,1513253698.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:58.787Z,1513253698.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:59.154Z,1513253699.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:59.178Z,1513253699.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:59.558Z,1513253699.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:59.580Z,1513253699.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:14:59.827Z,1513253699.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:59.943Z,1513253699.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:14:59.958Z,1513253699.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:00.345Z,1513253700.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:00.360Z,1513253700.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:00.623Z,1513253700.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:00.747Z,1513253700.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:00.763Z,1513253700.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:01.034Z,1513253701.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:01.176Z,1513253701.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:01.204Z,1513253701.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:01.557Z,1513253701.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:01.580Z,1513253701.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:01.830Z,1513253701.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:01.957Z,1513253701.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:02.014Z,1513253702.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:02.337Z,1513253702.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:02.368Z,1513253702.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:02.627Z,1513253702.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:02.736Z,1513253702.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:02.838Z,1513253702.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:03.037Z,1513253703.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:03.150Z,1513253703.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:03.167Z,1513253703.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:03.548Z,1513253703.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:03.563Z,1513253703.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:03.958Z,1513253703.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:03.978Z,1513253703.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:04.394Z,1513253704.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:04.419Z,1513253704.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:04.764Z,1513253704.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:04.784Z,1513253704.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:05.136Z,1513253705.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:05.166Z,1513253705.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:05.535Z,1513253705.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:05.571Z,1513253705.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:05.947Z,1513253705.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:05.962Z,1513253705.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:06.348Z,1513253706.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:06.367Z,1513253706.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:06.735Z,1513253706.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:06.767Z,1513253706.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:07.160Z,1513253707.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:07.176Z,1513253707.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:07.566Z,1513253707.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:07.595Z,1513253707.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:07.947Z,1513253707.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:07.979Z,1513253707.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:08.335Z,1513253708.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:08.375Z,1513253708.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:08.735Z,1513253708.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:08.759Z,1513253708.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:09.140Z,1513253709.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:09.171Z,1513253709.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:09.537Z,1513253709.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:09.552Z,1513253709.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:09.947Z,1513253709.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:09.978Z,1513253709.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:10.394Z,1513253710.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:10.428Z,1513253710.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:10.784Z,1513253710.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:10.799Z,1513253710.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:11.152Z,1513253711.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:11.182Z,1513253711.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:11.543Z,1513253711.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:11.559Z,1513253711.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:11.940Z,1513253711.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:11.956Z,1513253711.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:12.345Z,1513253712.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:12.360Z,1513253712.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:12.744Z,1513253712.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:12.802Z,1513253712.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:13.152Z,1513253713.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:13.167Z,1513253713.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:13.554Z,1513253713.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:13.569Z,1513253713.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:13.826Z,1513253713.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:13.962Z,1513253713.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:14.036Z,1513253714.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:14.357Z,1513253714.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:14.372Z,1513253714.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:14.624Z,1513253714.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:14.760Z,1513253714.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:14.775Z,1513253714.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:15.033Z,1513253715.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:15.136Z,1513253715.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:15.183Z,1513253715.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:15.538Z,1513253715.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:15.565Z,1513253715.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:15.830Z,1513253715.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:15.956Z,1513253715.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:15.995Z,1513253715.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:16.359Z,1513253716.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:16.379Z,1513253716.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:16.625Z,1513253716.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:16.767Z,1513253716.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:16.782Z,1513253716.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:17.030Z,1513253717.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:17.140Z,1513253717.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:17.235Z,1513253717.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:17.535Z,1513253717.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:17.569Z,1513253717.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:17.935Z,1513253717.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:17.966Z,1513253717.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:18.338Z,1513253718.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:18.390Z,1513253718.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:18.736Z,1513253718.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:18.772Z,1513253718.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:19.164Z,1513253719.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:19.178Z,1513253719.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:19.563Z,1513253719.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:19.578Z,1513253719.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:19.957Z,1513253719.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:19.972Z,1513253719.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:20.370Z,1513253720.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:20.414Z,1513253720.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:20.735Z,1513253720.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:20.766Z,1513253720.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.140Z,1513253721.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:21.175Z,1513253721.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.538Z,1513253721.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:21.578Z,1513253721.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.947Z,1513253721.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:21.980Z,1513253721.980 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.981Z,1513253721.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 234
2017-12-14T12:15:21.981Z,1513253721.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:15:21.983Z,1513253721.983 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.983Z,1513253721.983 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 234
2017-12-14T12:15:21.983Z,1513253721.983 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:15:21.985Z,1513253721.985 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:21.985Z,1513253721.985 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 234
2017-12-14T12:15:21.985Z,1513253721.985 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:15:21.997Z,1513253721.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:15:21.997Z,1513253721.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:15:21.997Z,1513253721.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:15:22.355Z,1513253722.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:22.390Z,1513253722.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:15:22.390Z,1513253722.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 234
2017-12-14T12:15:22.391Z,1513253722.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:15:22.391Z,1513253722.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 234
2017-12-14T12:15:22.391Z,1513253722.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:15:22.391Z,1513253722.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 234
2017-12-14T12:15:25.779Z,1513253725.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:25.841Z,1513253725.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:15:25.842Z,1513253725.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:15:25.842Z,1513253725.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:15:25.842Z,1513253725.842 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:15:25.843Z,1513253725.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:15:25.843Z,1513253725.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:15:25.843Z,1513253725.843 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:15:25.844Z,1513253725.844 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:15:25.844Z,1513253725.844 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:15:25.949Z,1513253725.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:25.977Z,1513253725.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:26.296Z,1513253726.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:26.339Z,1513253726.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:26.742Z,1513253726.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:26.768Z,1513253726.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:27.100Z,1513253727.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:27.115Z,1513253727.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:27.497Z,1513253727.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:27.512Z,1513253727.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:27.829Z,1513253727.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:27.902Z,1513253727.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:27.916Z,1513253727.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:28.311Z,1513253728.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:28.342Z,1513253728.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:28.634Z,1513253728.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:28.706Z,1513253728.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:28.722Z,1513253728.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:29.041Z,1513253729.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:29.102Z,1513253729.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:29.116Z,1513253729.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:29.500Z,1513253729.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:29.515Z,1513253729.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:29.838Z,1513253729.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:29.954Z,1513253729.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:29.997Z,1513253729.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:30.342Z,1513253730.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:30.363Z,1513253730.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:30.633Z,1513253730.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:30.722Z,1513253730.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:30.751Z,1513253730.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:31.037Z,1513253731.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:31.106Z,1513253731.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:31.122Z,1513253731.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:31.513Z,1513253731.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:31.546Z,1513253731.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:31.903Z,1513253731.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:31.918Z,1513253731.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:32.333Z,1513253732.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:32.362Z,1513253732.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:32.708Z,1513253732.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:32.731Z,1513253732.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:33.128Z,1513253733.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:33.164Z,1513253733.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:33.513Z,1513253733.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:33.535Z,1513253733.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:33.917Z,1513253733.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:33.932Z,1513253733.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:34.327Z,1513253734.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:34.367Z,1513253734.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:34.695Z,1513253734.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:34.765Z,1513253734.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:35.093Z,1513253735.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:35.108Z,1513253735.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:35.493Z,1513253735.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:35.526Z,1513253735.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:35.906Z,1513253735.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:35.939Z,1513253735.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:36.381Z,1513253736.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:36.431Z,1513253736.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:36.724Z,1513253736.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:36.763Z,1513253736.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:37.102Z,1513253737.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:37.117Z,1513253737.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:37.500Z,1513253737.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:37.517Z,1513253737.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:37.898Z,1513253737.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:37.962Z,1513253737.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:38.372Z,1513253738.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:38.415Z,1513253738.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:38.706Z,1513253738.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:38.722Z,1513253738.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:39.111Z,1513253739.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:39.162Z,1513253739.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:39.510Z,1513253739.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:39.557Z,1513253739.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:39.916Z,1513253739.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:39.957Z,1513253739.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:40.304Z,1513253740.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:40.328Z,1513253740.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:40.701Z,1513253740.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:40.725Z,1513253740.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:41.095Z,1513253741.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:41.123Z,1513253741.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:41.495Z,1513253741.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:41.522Z,1513253741.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:41.908Z,1513253741.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:41.930Z,1513253741.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:42.319Z,1513253742.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:42.334Z,1513253742.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:42.737Z,1513253742.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:42.770Z,1513253742.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:43.091Z,1513253743.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:43.122Z,1513253743.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:43.491Z,1513253743.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:43.521Z,1513253743.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:43.837Z,1513253743.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:43.890Z,1513253743.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:43.904Z,1513253743.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:44.332Z,1513253744.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:44.356Z,1513253744.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:44.633Z,1513253744.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:44.705Z,1513253744.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:44.729Z,1513253744.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:45.037Z,1513253745.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:45.109Z,1513253745.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:45.135Z,1513253745.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:45.509Z,1513253745.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:45.535Z,1513253745.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:45.945Z,1513253745.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:45.995Z,1513253745.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:46.317Z,1513253746.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:46.361Z,1513253746.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:46.709Z,1513253746.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:46.731Z,1513253746.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:47.104Z,1513253747.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:47.120Z,1513253747.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:47.503Z,1513253747.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:47.518Z,1513253747.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:47.910Z,1513253747.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:47.925Z,1513253747.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:48.346Z,1513253748.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:48.384Z,1513253748.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:48.709Z,1513253748.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:48.731Z,1513253748.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:49.107Z,1513253749.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:49.155Z,1513253749.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:49.491Z,1513253749.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:49.524Z,1513253749.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:49.895Z,1513253749.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:49.979Z,1513253749.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:50.333Z,1513253750.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:50.366Z,1513253750.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:50.693Z,1513253750.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:50.727Z,1513253750.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:51.115Z,1513253751.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:51.130Z,1513253751.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:51.514Z,1513253751.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:51.530Z,1513253751.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:51.914Z,1513253751.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:51.929Z,1513253751.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:52.327Z,1513253752.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:52.388Z,1513253752.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:52.707Z,1513253752.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:52.740Z,1513253752.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:53.104Z,1513253753.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:53.133Z,1513253753.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:53.500Z,1513253753.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:53.519Z,1513253753.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:53.901Z,1513253753.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:53.917Z,1513253753.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:54.313Z,1513253754.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:54.327Z,1513253754.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:54.706Z,1513253754.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:54.725Z,1513253754.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:55.102Z,1513253755.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:55.117Z,1513253755.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:55.500Z,1513253755.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:55.515Z,1513253755.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:55.900Z,1513253755.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:55.916Z,1513253755.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:56.300Z,1513253756.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:56.315Z,1513253756.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:56.709Z,1513253756.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:56.727Z,1513253756.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:57.111Z,1513253757.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:57.131Z,1513253757.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:57.514Z,1513253757.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:57.535Z,1513253757.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:57.915Z,1513253757.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:57.930Z,1513253757.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:58.322Z,1513253758.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:58.365Z,1513253758.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:58.696Z,1513253758.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:58.723Z,1513253758.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:59.093Z,1513253759.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:59.136Z,1513253759.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:59.491Z,1513253759.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:59.523Z,1513253759.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:15:59.919Z,1513253759.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:15:59.934Z,1513253759.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:00.339Z,1513253760.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:00.395Z,1513253760.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:00.717Z,1513253760.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:00.732Z,1513253760.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:01.095Z,1513253761.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:01.162Z,1513253761.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:01.491Z,1513253761.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:01.510Z,1513253761.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:01.898Z,1513253761.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:01.975Z,1513253761.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:02.329Z,1513253762.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:02.374Z,1513253762.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:02.692Z,1513253762.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:02.716Z,1513253762.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:03.107Z,1513253763.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:03.134Z,1513253763.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:03.505Z,1513253763.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:03.539Z,1513253763.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:03.905Z,1513253763.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:03.931Z,1513253763.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:04.334Z,1513253764.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:04.378Z,1513253764.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:04.703Z,1513253764.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:04.733Z,1513253764.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:05.133Z,1513253765.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:05.195Z,1513253765.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:05.496Z,1513253765.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:05.528Z,1513253765.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:05.905Z,1513253765.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:05.935Z,1513253765.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:06.333Z,1513253766.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:06.404Z,1513253766.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:06.706Z,1513253766.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:06.720Z,1513253766.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:07.100Z,1513253767.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:07.119Z,1513253767.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:07.505Z,1513253767.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:07.519Z,1513253767.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:07.896Z,1513253767.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:07.912Z,1513253767.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:08.318Z,1513253768.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:08.342Z,1513253768.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:08.716Z,1513253768.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:08.732Z,1513253768.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:09.110Z,1513253769.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:09.125Z,1513253769.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:09.523Z,1513253769.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:09.537Z,1513253769.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:09.916Z,1513253769.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:09.931Z,1513253769.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:10.288Z,1513253770.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:10.328Z,1513253770.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:10.698Z,1513253770.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:10.723Z,1513253770.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:11.092Z,1513253771.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:11.115Z,1513253771.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:11.540Z,1513253771.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:11.587Z,1513253771.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:11.919Z,1513253771.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:11.939Z,1513253771.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:12.339Z,1513253772.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:12.360Z,1513253772.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:12.719Z,1513253772.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:12.742Z,1513253772.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:13.099Z,1513253773.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:13.119Z,1513253773.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:13.501Z,1513253773.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:13.516Z,1513253773.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:13.906Z,1513253773.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:13.920Z,1513253773.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:14.327Z,1513253774.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:14.363Z,1513253774.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:14.726Z,1513253774.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:14.768Z,1513253774.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:15.111Z,1513253775.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:15.127Z,1513253775.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:15.519Z,1513253775.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:15.578Z,1513253775.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:15.919Z,1513253775.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:15.934Z,1513253775.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:16.330Z,1513253776.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:16.350Z,1513253776.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:16.695Z,1513253776.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:16.731Z,1513253776.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:17.092Z,1513253777.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:17.130Z,1513253777.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:17.492Z,1513253777.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:17.527Z,1513253777.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:17.915Z,1513253777.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:17.980Z,1513253777.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:18.352Z,1513253778.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:18.367Z,1513253778.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:18.714Z,1513253778.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:18.750Z,1513253778.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:19.094Z,1513253779.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:19.123Z,1513253779.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:19.502Z,1513253779.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:19.520Z,1513253779.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:19.896Z,1513253779.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:19.912Z,1513253779.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:20.339Z,1513253780.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:20.392Z,1513253780.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:20.695Z,1513253780.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:20.730Z,1513253780.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:21.124Z,1513253781.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:21.172Z,1513253781.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:21.510Z,1513253781.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:21.535Z,1513253781.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:21.907Z,1513253781.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:22.014Z,1513253782.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:22.314Z,1513253782.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:22.355Z,1513253782.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:22.713Z,1513253782.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:22.784Z,1513253782.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:29.110Z,1513253789.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:29.207Z,1513253789.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:29.334Z,1513253789.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:29.392Z,1513253789.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:29.727Z,1513253789.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:29.796Z,1513253789.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:30.130Z,1513253790.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:30.160Z,1513253790.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:30.508Z,1513253790.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:30.555Z,1513253790.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:30.897Z,1513253790.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:30.937Z,1513253790.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:31.335Z,1513253791.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:31.355Z,1513253791.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:31.704Z,1513253791.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:31.757Z,1513253791.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:32.114Z,1513253792.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:32.143Z,1513253792.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:32.518Z,1513253792.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:32.569Z,1513253792.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:32.915Z,1513253792.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:32.945Z,1513253792.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:33.304Z,1513253793.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:33.347Z,1513253793.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:33.704Z,1513253793.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:33.720Z,1513253793.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:34.120Z,1513253794.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:34.136Z,1513253794.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:34.495Z,1513253794.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:34.552Z,1513253794.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:34.922Z,1513253794.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:34.967Z,1513253794.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:35.319Z,1513253795.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:35.340Z,1513253795.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:35.755Z,1513253795.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:35.769Z,1513253795.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:36.089Z,1513253796.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:36.104Z,1513253796.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:36.496Z,1513253796.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:36.512Z,1513253796.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:36.896Z,1513253796.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:36.951Z,1513253796.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:37.297Z,1513253797.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:37.351Z,1513253797.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:37.696Z,1513253797.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:37.724Z,1513253797.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:38.112Z,1513253798.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:38.183Z,1513253798.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:38.522Z,1513253798.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:38.541Z,1513253798.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:38.908Z,1513253798.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:38.948Z,1513253798.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:39.300Z,1513253799.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:39.350Z,1513253799.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:39.701Z,1513253799.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:39.744Z,1513253799.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:40.121Z,1513253800.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:40.154Z,1513253800.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:40.510Z,1513253800.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:40.562Z,1513253800.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:40.952Z,1513253800.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:41.026Z,1513253801.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:41.324Z,1513253801.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:41.360Z,1513253801.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:41.713Z,1513253801.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:41.755Z,1513253801.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:42.106Z,1513253802.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:42.139Z,1513253802.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:42.518Z,1513253802.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:42.541Z,1513253802.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:42.897Z,1513253802.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:42.988Z,1513253802.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:43.297Z,1513253803.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:43.358Z,1513253803.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:43.695Z,1513253803.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:43.714Z,1513253803.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:44.115Z,1513253804.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:44.187Z,1513253804.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:44.520Z,1513253804.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:44.547Z,1513253804.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:44.908Z,1513253804.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:44.947Z,1513253804.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:45.297Z,1513253805.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:45.336Z,1513253805.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:45.696Z,1513253805.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:45.736Z,1513253805.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:46.110Z,1513253806.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:46.155Z,1513253806.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:46.504Z,1513253806.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:46.531Z,1513253806.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:46.920Z,1513253806.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:46.969Z,1513253806.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:47.321Z,1513253807.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:47.349Z,1513253807.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:47.707Z,1513253807.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:47.733Z,1513253807.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:48.098Z,1513253808.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:48.143Z,1513253808.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:48.499Z,1513253808.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:48.547Z,1513253808.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:48.914Z,1513253808.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:48.961Z,1513253808.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:49.295Z,1513253809.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:49.347Z,1513253809.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:49.706Z,1513253809.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:49.737Z,1513253809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:50.116Z,1513253810.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:50.152Z,1513253810.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:50.522Z,1513253810.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:50.676Z,1513253810.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:50.919Z,1513253810.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:51.016Z,1513253811.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:51.296Z,1513253811.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:51.343Z,1513253811.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:51.696Z,1513253811.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:51.751Z,1513253811.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:52.098Z,1513253812.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:52.143Z,1513253812.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:52.500Z,1513253812.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:52.549Z,1513253812.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:52.922Z,1513253812.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:52.965Z,1513253812.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:53.323Z,1513253813.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:53.347Z,1513253813.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:53.711Z,1513253813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:53.762Z,1513253813.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:54.104Z,1513253814.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:54.180Z,1513253814.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:54.501Z,1513253814.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:54.547Z,1513253814.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:54.897Z,1513253814.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:54.945Z,1513253814.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:55.298Z,1513253815.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:55.346Z,1513253815.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:55.697Z,1513253815.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:55.712Z,1513253815.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:56.109Z,1513253816.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:56.141Z,1513253816.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:56.509Z,1513253816.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:56.539Z,1513253816.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:56.910Z,1513253816.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:56.935Z,1513253816.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:57.306Z,1513253817.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:57.333Z,1513253817.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:57.705Z,1513253817.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:57.774Z,1513253817.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:58.149Z,1513253818.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:58.164Z,1513253818.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:58.507Z,1513253818.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:58.523Z,1513253818.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:58.914Z,1513253818.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:58.946Z,1513253818.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:59.313Z,1513253819.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:59.344Z,1513253819.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:16:59.710Z,1513253819.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:16:59.737Z,1513253819.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:00.101Z,1513253820.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:00.116Z,1513253820.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:00.512Z,1513253820.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:00.571Z,1513253820.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:00.905Z,1513253820.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:00.959Z,1513253820.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:01.303Z,1513253821.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:01.318Z,1513253821.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:01.704Z,1513253821.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:01.719Z,1513253821.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:02.117Z,1513253822.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:02.153Z,1513253822.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:02.521Z,1513253822.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:02.555Z,1513253822.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:02.910Z,1513253822.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:02.931Z,1513253822.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:03.304Z,1513253823.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:03.320Z,1513253823.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:03.703Z,1513253823.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:03.717Z,1513253823.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:04.113Z,1513253824.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:04.156Z,1513253824.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:04.504Z,1513253824.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:04.519Z,1513253824.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:04.911Z,1513253824.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:04.931Z,1513253824.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:05.308Z,1513253825.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:05.323Z,1513253825.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:05.710Z,1513253825.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:05.725Z,1513253825.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:06.116Z,1513253826.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:06.136Z,1513253826.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:06.496Z,1513253826.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:06.524Z,1513253826.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:06.895Z,1513253826.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:06.934Z,1513253826.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:07.305Z,1513253827.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:07.343Z,1513253827.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:07.696Z,1513253827.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:07.722Z,1513253827.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:08.114Z,1513253828.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:08.129Z,1513253828.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:08.526Z,1513253828.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:08.541Z,1513253828.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:08.923Z,1513253828.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:08.959Z,1513253828.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:09.299Z,1513253829.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:09.334Z,1513253829.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:09.699Z,1513253829.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:09.727Z,1513253829.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:10.096Z,1513253830.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:10.123Z,1513253830.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:10.537Z,1513253830.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:10.585Z,1513253830.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:10.923Z,1513253830.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:10.955Z,1513253830.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:11.320Z,1513253831.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:11.336Z,1513253831.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:11.728Z,1513253831.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:11.747Z,1513253831.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:12.104Z,1513253832.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:12.128Z,1513253832.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:12.499Z,1513253832.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:12.547Z,1513253832.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:12.904Z,1513253832.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:12.919Z,1513253832.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:13.304Z,1513253833.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:13.318Z,1513253833.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:13.705Z,1513253833.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:13.795Z,1513253833.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:14.119Z,1513253834.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:14.148Z,1513253834.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:14.517Z,1513253834.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:14.560Z,1513253834.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:14.914Z,1513253834.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:14.950Z,1513253834.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:15.301Z,1513253835.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:15.396Z,1513253835.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:15.705Z,1513253835.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:15.719Z,1513253835.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:16.105Z,1513253836.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:16.120Z,1513253836.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:16.502Z,1513253836.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:16.523Z,1513253836.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:16.909Z,1513253836.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:16.997Z,1513253836.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:17.309Z,1513253837.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:17.331Z,1513253837.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:17.722Z,1513253837.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:17.752Z,1513253837.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:18.102Z,1513253838.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:18.147Z,1513253838.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:18.495Z,1513253838.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:18.531Z,1513253838.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:18.895Z,1513253838.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:18.927Z,1513253838.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:19.317Z,1513253839.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:19.331Z,1513253839.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:19.699Z,1513253839.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:19.725Z,1513253839.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:20.128Z,1513253840.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:20.151Z,1513253840.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:20.520Z,1513253840.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:20.539Z,1513253840.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:20.915Z,1513253840.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:20.945Z,1513253840.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:21.307Z,1513253841.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:21.347Z,1513253841.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:21.705Z,1513253841.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:21.719Z,1513253841.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:22.100Z,1513253842.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:22.128Z,1513253842.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:22.506Z,1513253842.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:22.521Z,1513253842.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:22.910Z,1513253842.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:22.967Z,1513253842.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:26.554Z,1513253846.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:26.569Z,1513253846.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:26.694Z,1513253846.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:26.716Z,1513253846.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:27.037Z,1513253847.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:27.066Z,1513253847.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:27.435Z,1513253847.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:27.471Z,1513253847.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:27.829Z,1513253847.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:27.860Z,1513253847.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:28.280Z,1513253848.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:28.326Z,1513253848.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:28.650Z,1513253848.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:28.677Z,1513253848.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:29.046Z,1513253849.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:29.067Z,1513253849.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:29.449Z,1513253849.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:29.472Z,1513253849.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:29.849Z,1513253849.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:29.919Z,1513253849.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:30.251Z,1513253850.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:30.353Z,1513253850.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:30.643Z,1513253850.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:30.659Z,1513253850.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:31.041Z,1513253851.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:31.056Z,1513253851.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:31.446Z,1513253851.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:31.460Z,1513253851.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:31.861Z,1513253851.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:31.891Z,1513253851.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:32.253Z,1513253852.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:32.289Z,1513253852.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:32.685Z,1513253852.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:32.706Z,1513253852.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:33.059Z,1513253853.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:33.152Z,1513253853.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:33.437Z,1513253853.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:33.483Z,1513253853.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:33.834Z,1513253853.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:33.865Z,1513253853.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:34.235Z,1513253854.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:34.273Z,1513253854.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:34.674Z,1513253854.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:34.739Z,1513253854.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:35.055Z,1513253855.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:35.080Z,1513253855.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:35.449Z,1513253855.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:35.489Z,1513253855.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:35.850Z,1513253855.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:35.899Z,1513253855.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:36.270Z,1513253856.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:36.339Z,1513253856.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:36.650Z,1513253856.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:36.688Z,1513253856.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:37.042Z,1513253857.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:37.056Z,1513253857.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:37.436Z,1513253857.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:37.451Z,1513253857.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:37.853Z,1513253857.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:37.880Z,1513253857.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:38.301Z,1513253858.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:38.336Z,1513253858.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:38.660Z,1513253858.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:38.675Z,1513253858.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:39.046Z,1513253859.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:39.061Z,1513253859.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:39.447Z,1513253859.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:39.462Z,1513253859.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:39.836Z,1513253859.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:39.864Z,1513253859.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:40.279Z,1513253860.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:40.322Z,1513253860.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:40.642Z,1513253860.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:40.671Z,1513253860.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:41.054Z,1513253861.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:41.075Z,1513253861.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:41.471Z,1513253861.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:41.491Z,1513253861.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:41.859Z,1513253861.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:41.873Z,1513253861.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:42.264Z,1513253862.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:42.330Z,1513253862.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:42.700Z,1513253862.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:42.731Z,1513253862.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:43.059Z,1513253863.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:43.073Z,1513253863.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:43.432Z,1513253863.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:43.465Z,1513253863.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:43.858Z,1513253863.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:43.872Z,1513253863.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:44.259Z,1513253864.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:44.355Z,1513253864.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:44.666Z,1513253864.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:44.680Z,1513253864.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:45.039Z,1513253865.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:45.091Z,1513253865.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:45.433Z,1513253865.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:45.448Z,1513253865.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:45.831Z,1513253865.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:45.920Z,1513253865.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:46.237Z,1513253866.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:46.270Z,1513253866.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:46.671Z,1513253866.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:46.707Z,1513253866.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:47.054Z,1513253867.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:47.078Z,1513253867.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:47.469Z,1513253867.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:47.483Z,1513253867.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:47.871Z,1513253867.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:47.891Z,1513253867.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:48.236Z,1513253868.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:48.256Z,1513253868.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:48.659Z,1513253868.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:48.706Z,1513253868.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:49.068Z,1513253869.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:49.100Z,1513253869.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:49.448Z,1513253869.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:49.463Z,1513253869.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:49.857Z,1513253869.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:49.872Z,1513253869.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:50.281Z,1513253870.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:50.349Z,1513253870.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:50.662Z,1513253870.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:50.687Z,1513253870.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:51.042Z,1513253871.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:51.069Z,1513253871.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:51.440Z,1513253871.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:51.467Z,1513253871.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:51.831Z,1513253871.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:51.863Z,1513253871.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:52.298Z,1513253872.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:52.347Z,1513253872.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:52.654Z,1513253872.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:52.685Z,1513253872.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:53.052Z,1513253873.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:53.079Z,1513253873.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:53.456Z,1513253873.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:53.479Z,1513253873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:53.859Z,1513253873.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:53.880Z,1513253873.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:54.291Z,1513253874.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:54.342Z,1513253874.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:54.644Z,1513253874.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:54.676Z,1513253874.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:55.042Z,1513253875.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:55.057Z,1513253875.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:55.446Z,1513253875.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:55.461Z,1513253875.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:55.846Z,1513253875.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:55.903Z,1513253875.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:56.273Z,1513253876.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:56.332Z,1513253876.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:56.662Z,1513253876.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:56.686Z,1513253876.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:57.035Z,1513253877.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:57.100Z,1513253877.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:57.442Z,1513253877.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:57.470Z,1513253877.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:57.842Z,1513253877.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:57.914Z,1513253877.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:58.234Z,1513253878.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:58.248Z,1513253878.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:58.680Z,1513253878.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:58.731Z,1513253878.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:59.057Z,1513253879.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:59.072Z,1513253879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:59.455Z,1513253879.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:59.473Z,1513253879.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:17:59.846Z,1513253879.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:17:59.879Z,1513253879.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:00.238Z,1513253880.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:00.273Z,1513253880.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:00.671Z,1513253880.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:00.706Z,1513253880.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:01.041Z,1513253881.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:01.073Z,1513253881.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:01.438Z,1513253881.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:01.461Z,1513253881.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:01.873Z,1513253881.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:01.929Z,1513253881.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:02.263Z,1513253882.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:02.280Z,1513253882.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:02.684Z,1513253882.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:02.708Z,1513253882.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:03.043Z,1513253883.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:03.067Z,1513253883.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:03.450Z,1513253883.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:03.466Z,1513253883.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:03.846Z,1513253883.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:03.888Z,1513253883.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:04.295Z,1513253884.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:04.339Z,1513253884.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:04.641Z,1513253884.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:04.676Z,1513253884.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:05.081Z,1513253885.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:05.100Z,1513253885.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:05.457Z,1513253885.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:05.491Z,1513253885.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:05.854Z,1513253885.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:05.876Z,1513253885.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:06.278Z,1513253886.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:06.332Z,1513253886.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:06.649Z,1513253886.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:06.664Z,1513253886.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:07.048Z,1513253887.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:07.091Z,1513253887.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:07.437Z,1513253887.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:07.460Z,1513253887.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:07.846Z,1513253887.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:07.862Z,1513253887.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:08.302Z,1513253888.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:08.358Z,1513253888.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:08.666Z,1513253888.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:08.688Z,1513253888.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:09.036Z,1513253889.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:09.060Z,1513253889.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:09.441Z,1513253889.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:09.455Z,1513253889.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:09.840Z,1513253889.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:09.856Z,1513253889.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:10.305Z,1513253890.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:10.336Z,1513253890.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:10.643Z,1513253890.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:10.658Z,1513253890.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:11.046Z,1513253891.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:11.061Z,1513253891.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:11.451Z,1513253891.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:11.466Z,1513253891.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:11.850Z,1513253891.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:11.882Z,1513253891.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:12.243Z,1513253892.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:12.273Z,1513253892.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:12.642Z,1513253892.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:12.669Z,1513253892.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:13.041Z,1513253893.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:13.055Z,1513253893.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:13.446Z,1513253893.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:13.461Z,1513253893.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:13.853Z,1513253893.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:13.868Z,1513253893.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:14.254Z,1513253894.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:14.285Z,1513253894.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:14.731Z,1513253894.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:14.779Z,1513253894.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:15.036Z,1513253895.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:15.062Z,1513253895.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:15.435Z,1513253895.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:15.461Z,1513253895.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:15.832Z,1513253895.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:15.860Z,1513253895.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:16.235Z,1513253896.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:16.268Z,1513253896.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:16.664Z,1513253896.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:16.686Z,1513253896.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:17.058Z,1513253897.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:17.075Z,1513253897.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:17.457Z,1513253897.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:17.527Z,1513253897.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:17.860Z,1513253897.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:17.875Z,1513253897.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:18.316Z,1513253898.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:18.344Z,1513253898.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:18.637Z,1513253898.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:18.660Z,1513253898.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:19.039Z,1513253899.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:19.100Z,1513253899.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:19.438Z,1513253899.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:19.469Z,1513253899.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:19.930Z,1513253899.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:19.982Z,1513253899.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:20.290Z,1513253900.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:20.319Z,1513253900.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:20.659Z,1513253900.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:20.719Z,1513253900.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:21.061Z,1513253901.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:21.085Z,1513253901.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:21.437Z,1513253901.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:21.463Z,1513253901.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:21.845Z,1513253901.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:21.860Z,1513253901.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:22.291Z,1513253902.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:22.321Z,1513253902.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:22.325Z,1513253902.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:13:21.9Z
2017-12-14T12:18:22.325Z,1513253902.325 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T12:18:22.325Z,1513253902.325 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T12:18:22.642Z,1513253902.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:22.656Z,1513253902.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:23.437Z,1513253903.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:23.453Z,1513253903.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:26.694Z,1513253906.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:26.709Z,1513253906.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:26.709Z,1513253906.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 235
2017-12-14T12:18:26.709Z,1513253906.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:18:26.711Z,1513253906.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:26.711Z,1513253906.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 235
2017-12-14T12:18:26.711Z,1513253906.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:18:26.713Z,1513253906.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:26.713Z,1513253906.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 235
2017-12-14T12:18:26.713Z,1513253906.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:18:26.754Z,1513253906.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:18:26.754Z,1513253906.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:18:26.754Z,1513253906.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:18:26.789Z,1513253906.789 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0272.lzma
2017-12-14T12:18:26.848Z,1513253906.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:26.906Z,1513253906.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:18:26.906Z,1513253906.906 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 235
2017-12-14T12:18:26.907Z,1513253906.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:18:26.907Z,1513253906.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 235
2017-12-14T12:18:26.907Z,1513253906.907 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:18:26.907Z,1513253906.907 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 235
2017-12-14T12:18:27.187Z,1513253907.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:27.206Z,1513253907.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:18:27.206Z,1513253907.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:18:27.206Z,1513253907.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:18:27.207Z,1513253907.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:18:27.207Z,1513253907.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:18:27.207Z,1513253907.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:18:27.208Z,1513253907.208 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:18:27.208Z,1513253907.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:18:27.209Z,1513253907.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:18:27.963Z,1513253907.963 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0272.lzma.bak
2017-12-14T12:18:27.963Z,1513253907.963 [DataOverHttps](INFO): SBD MOMSN=5438701
2017-12-14T12:18:28.027Z,1513253908.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:28.063Z,1513253908.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:29.182Z,1513253909.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:29.238Z,1513253909.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:29.338Z,1513253909.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:29.378Z,1513253909.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:32.898Z,1513253912.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:32.975Z,1513253912.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:33.080Z,1513253913.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:33.095Z,1513253913.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:33.438Z,1513253913.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:33.455Z,1513253913.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:33.843Z,1513253913.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:33.885Z,1513253913.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:34.306Z,1513253914.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:34.337Z,1513253914.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:34.691Z,1513253914.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:34.779Z,1513253914.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:38.160Z,1513253918.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:38.175Z,1513253918.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:38.321Z,1513253918.321 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0273.lzma
2017-12-14T12:18:38.370Z,1513253918.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:38.395Z,1513253918.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:38.658Z,1513253918.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:38.689Z,1513253918.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:57.101Z,1513253937.101 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0273.lzma.bak
2017-12-14T12:18:57.101Z,1513253937.101 [DataOverHttps](INFO): SBD MOMSN=5438703
2017-12-14T12:18:57.142Z,1513253937.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:57.186Z,1513253937.186 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:18:57.186Z,1513253937.186 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:18:57.186Z,1513253937.186 [BPC1](ERROR): Communications Fault
2017-12-14T12:18:57.212Z,1513253937.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:57.267Z,1513253937.267 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:18:58.427Z,1513253938.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:58.442Z,1513253938.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:18:58.446Z,1513253938.446 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T12:18:58.446Z,1513253938.446 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T12:18:58.446Z,1513253938.446 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T12:18:58.592Z,1513253938.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:18:58.664Z,1513253938.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:02.170Z,1513253942.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:02.211Z,1513253942.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:02.224Z,1513253942.224 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:19:02.224Z,1513253942.224 [BPC1] No Fault, FailCount= 1
2017-12-14T12:19:02.352Z,1513253942.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:02.439Z,1513253942.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:02.703Z,1513253942.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:02.739Z,1513253942.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:03.119Z,1513253943.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:03.134Z,1513253943.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:03.504Z,1513253943.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:03.540Z,1513253943.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:03.906Z,1513253943.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:03.931Z,1513253943.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:04.346Z,1513253944.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:04.422Z,1513253944.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:04.729Z,1513253944.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:04.744Z,1513253944.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:05.118Z,1513253945.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:05.142Z,1513253945.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:05.503Z,1513253945.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:05.542Z,1513253945.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:05.902Z,1513253945.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:05.916Z,1513253945.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:06.315Z,1513253946.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:06.343Z,1513253946.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:06.737Z,1513253946.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:06.767Z,1513253946.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:07.125Z,1513253947.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:07.140Z,1513253947.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:07.524Z,1513253947.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:07.539Z,1513253947.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:07.913Z,1513253947.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:07.928Z,1513253947.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:08.359Z,1513253948.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:08.398Z,1513253948.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:08.712Z,1513253948.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:08.735Z,1513253948.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:09.108Z,1513253949.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:09.183Z,1513253949.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:09.522Z,1513253949.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:09.547Z,1513253949.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:09.922Z,1513253949.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:09.944Z,1513253949.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:10.322Z,1513253950.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:10.349Z,1513253950.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:10.719Z,1513253950.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:10.771Z,1513253950.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:11.108Z,1513253951.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:11.123Z,1513253951.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:11.511Z,1513253951.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:11.526Z,1513253951.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:11.910Z,1513253951.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:11.931Z,1513253951.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:12.356Z,1513253952.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:12.399Z,1513253952.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:12.729Z,1513253952.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:12.757Z,1513253952.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:13.114Z,1513253953.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:13.128Z,1513253953.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:13.525Z,1513253953.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:13.558Z,1513253953.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:13.911Z,1513253953.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:13.926Z,1513253953.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:14.318Z,1513253954.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:14.372Z,1513253954.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:14.704Z,1513253954.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:14.739Z,1513253954.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:15.107Z,1513253955.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:15.135Z,1513253955.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:15.584Z,1513253955.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:15.607Z,1513253955.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:15.926Z,1513253955.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:15.947Z,1513253955.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:16.340Z,1513253956.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:16.355Z,1513253956.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:16.389Z,1513253956.389 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:19:16.708Z,1513253956.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:16.739Z,1513253956.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:17.103Z,1513253957.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:17.135Z,1513253957.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:17.507Z,1513253957.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:17.542Z,1513253957.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:17.907Z,1513253957.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:17.939Z,1513253957.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:18.338Z,1513253958.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:18.359Z,1513253958.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:18.727Z,1513253958.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:18.747Z,1513253958.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:19.148Z,1513253959.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:19.163Z,1513253959.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:19.517Z,1513253959.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:19.548Z,1513253959.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:19.931Z,1513253959.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:19.989Z,1513253959.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:20.342Z,1513253960.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:20.358Z,1513253960.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:20.711Z,1513253960.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:20.745Z,1513253960.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:21.111Z,1513253961.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:21.138Z,1513253961.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:21.527Z,1513253961.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:21.552Z,1513253961.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:21.942Z,1513253961.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:21.967Z,1513253961.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:22.384Z,1513253962.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:22.412Z,1513253962.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:22.720Z,1513253962.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:22.787Z,1513253962.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:23.112Z,1513253963.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:23.135Z,1513253963.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:23.505Z,1513253963.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:23.569Z,1513253963.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:23.908Z,1513253963.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:23.938Z,1513253963.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:24.303Z,1513253964.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:24.352Z,1513253964.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:24.729Z,1513253964.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:24.743Z,1513253964.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:25.170Z,1513253965.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:25.201Z,1513253965.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:25.527Z,1513253965.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:25.542Z,1513253965.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:25.904Z,1513253965.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:25.939Z,1513253965.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:26.307Z,1513253966.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:26.343Z,1513253966.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:26.703Z,1513253966.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:26.740Z,1513253966.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:27.107Z,1513253967.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:27.140Z,1513253967.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:27.513Z,1513253967.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:27.544Z,1513253967.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:27.934Z,1513253967.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:27.949Z,1513253967.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:28.352Z,1513253968.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:28.388Z,1513253968.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:28.703Z,1513253968.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:28.744Z,1513253968.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:29.107Z,1513253969.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:29.138Z,1513253969.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:29.503Z,1513253969.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:29.537Z,1513253969.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:29.904Z,1513253969.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:29.939Z,1513253969.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:30.341Z,1513253970.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:30.356Z,1513253970.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:30.718Z,1513253970.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:30.748Z,1513253970.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:31.136Z,1513253971.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:31.152Z,1513253971.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:31.554Z,1513253971.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:31.591Z,1513253971.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:31.897Z,1513253971.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:31.919Z,1513253971.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:32.321Z,1513253972.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:32.379Z,1513253972.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:32.714Z,1513253972.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:32.729Z,1513253972.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:33.125Z,1513253973.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:33.153Z,1513253973.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:33.518Z,1513253973.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:33.546Z,1513253973.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:33.921Z,1513253973.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:33.936Z,1513253973.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:34.328Z,1513253974.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:34.351Z,1513253974.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:34.703Z,1513253974.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:34.735Z,1513253974.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:35.124Z,1513253975.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:35.143Z,1513253975.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:35.503Z,1513253975.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:35.539Z,1513253975.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:35.907Z,1513253975.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:35.932Z,1513253975.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:36.377Z,1513253976.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:36.399Z,1513253976.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:36.728Z,1513253976.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:36.743Z,1513253976.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:37.126Z,1513253977.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:37.141Z,1513253977.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:37.527Z,1513253977.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:37.541Z,1513253977.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:37.900Z,1513253977.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:37.935Z,1513253977.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:38.330Z,1513253978.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:38.355Z,1513253978.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:38.704Z,1513253978.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:38.734Z,1513253978.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:39.103Z,1513253979.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:39.136Z,1513253979.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:39.531Z,1513253979.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:39.547Z,1513253979.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:39.920Z,1513253979.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:39.957Z,1513253979.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:40.325Z,1513253980.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:40.347Z,1513253980.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:40.707Z,1513253980.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:40.732Z,1513253980.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:41.103Z,1513253981.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:41.139Z,1513253981.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:41.503Z,1513253981.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:41.602Z,1513253981.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:41.910Z,1513253981.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:41.926Z,1513253981.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:42.325Z,1513253982.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:42.365Z,1513253982.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:42.727Z,1513253982.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:42.753Z,1513253982.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:43.125Z,1513253983.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:43.155Z,1513253983.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:43.521Z,1513253983.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:43.551Z,1513253983.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:43.907Z,1513253983.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:43.933Z,1513253983.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:44.317Z,1513253984.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:44.411Z,1513253984.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:44.771Z,1513253984.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:44.811Z,1513253984.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:45.111Z,1513253985.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:45.127Z,1513253985.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:45.518Z,1513253985.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:45.583Z,1513253985.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:45.921Z,1513253985.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:45.935Z,1513253985.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:46.331Z,1513253986.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:46.375Z,1513253986.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:46.712Z,1513253986.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:46.731Z,1513253986.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:47.114Z,1513253987.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:47.130Z,1513253987.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:47.512Z,1513253987.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:47.526Z,1513253987.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:47.932Z,1513253987.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:47.964Z,1513253987.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:48.372Z,1513253988.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:48.414Z,1513253988.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:48.722Z,1513253988.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:48.737Z,1513253988.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:49.121Z,1513253989.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:49.136Z,1513253989.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:49.517Z,1513253989.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:49.539Z,1513253989.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:49.905Z,1513253989.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:49.920Z,1513253989.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:50.357Z,1513253990.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:50.397Z,1513253990.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:50.708Z,1513253990.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:50.734Z,1513253990.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:51.138Z,1513253991.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:51.181Z,1513253991.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:51.524Z,1513253991.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:51.539Z,1513253991.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:51.927Z,1513253991.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:51.942Z,1513253991.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:52.323Z,1513253992.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:52.339Z,1513253992.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:52.703Z,1513253992.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:52.781Z,1513253992.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:53.107Z,1513253993.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:53.138Z,1513253993.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:53.504Z,1513253993.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:53.542Z,1513253993.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:53.904Z,1513253993.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:53.936Z,1513253993.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:54.335Z,1513253994.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:54.366Z,1513253994.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:54.718Z,1513253994.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:54.785Z,1513253994.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:55.118Z,1513253995.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:55.152Z,1513253995.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:55.547Z,1513253995.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:55.567Z,1513253995.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:55.908Z,1513253995.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:55.948Z,1513253995.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:56.317Z,1513253996.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:56.399Z,1513253996.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:56.709Z,1513253996.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:56.740Z,1513253996.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:57.106Z,1513253997.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:57.120Z,1513253997.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:57.569Z,1513253997.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:57.600Z,1513253997.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:57.939Z,1513253997.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:57.955Z,1513253997.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:58.352Z,1513253998.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:58.367Z,1513253998.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:58.715Z,1513253998.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:58.748Z,1513253998.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:19:59.116Z,1513253999.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:19:59.150Z,1513253999.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:02.628Z,1513254002.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:02.658Z,1513254002.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:02.761Z,1513254002.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:02.810Z,1513254002.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:03.126Z,1513254003.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:03.151Z,1513254003.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:03.530Z,1513254003.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:03.562Z,1513254003.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:03.967Z,1513254003.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:04.010Z,1513254004.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:04.379Z,1513254004.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:04.412Z,1513254004.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:04.716Z,1513254004.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:04.732Z,1513254004.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:05.112Z,1513254005.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:05.136Z,1513254005.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:05.521Z,1513254005.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:05.537Z,1513254005.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:05.930Z,1513254005.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:05.964Z,1513254005.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:06.318Z,1513254006.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:06.334Z,1513254006.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:06.714Z,1513254006.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:06.775Z,1513254006.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:07.159Z,1513254007.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:07.223Z,1513254007.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:07.514Z,1513254007.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:07.536Z,1513254007.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:07.919Z,1513254007.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:07.967Z,1513254007.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:08.331Z,1513254008.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:08.347Z,1513254008.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:08.727Z,1513254008.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:08.769Z,1513254008.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:09.122Z,1513254009.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:09.149Z,1513254009.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:09.511Z,1513254009.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:09.536Z,1513254009.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:09.911Z,1513254009.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:09.937Z,1513254009.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:10.369Z,1513254010.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:10.412Z,1513254010.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:10.709Z,1513254010.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:10.736Z,1513254010.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:11.107Z,1513254011.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:11.133Z,1513254011.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:11.524Z,1513254011.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:11.542Z,1513254011.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:11.928Z,1513254011.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:11.996Z,1513254011.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:12.350Z,1513254012.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:12.383Z,1513254012.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:12.708Z,1513254012.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:12.739Z,1513254012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:13.111Z,1513254013.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:13.138Z,1513254013.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:13.538Z,1513254013.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:13.566Z,1513254013.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:13.914Z,1513254013.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:13.943Z,1513254013.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:14.336Z,1513254014.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:14.351Z,1513254014.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:14.738Z,1513254014.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:14.754Z,1513254014.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:15.126Z,1513254015.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:15.153Z,1513254015.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:15.507Z,1513254015.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:15.522Z,1513254015.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:15.915Z,1513254015.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:15.955Z,1513254015.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:16.332Z,1513254016.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:16.360Z,1513254016.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:16.729Z,1513254016.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:16.761Z,1513254016.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:17.131Z,1513254017.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:17.189Z,1513254017.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:17.525Z,1513254017.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:17.547Z,1513254017.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:17.924Z,1513254017.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:17.940Z,1513254017.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:18.390Z,1513254018.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:18.419Z,1513254018.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:18.711Z,1513254018.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:18.738Z,1513254018.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:19.121Z,1513254019.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:19.143Z,1513254019.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:19.516Z,1513254019.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:19.535Z,1513254019.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:19.944Z,1513254019.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:20.003Z,1513254020.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:20.326Z,1513254020.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:20.341Z,1513254020.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:20.728Z,1513254020.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:20.743Z,1513254020.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:21.127Z,1513254021.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:21.148Z,1513254021.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:21.521Z,1513254021.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:21.535Z,1513254021.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:21.913Z,1513254021.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:21.940Z,1513254021.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:22.314Z,1513254022.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:22.339Z,1513254022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:22.716Z,1513254022.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:22.731Z,1513254022.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:23.131Z,1513254023.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:23.168Z,1513254023.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:23.517Z,1513254023.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:23.551Z,1513254023.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:23.935Z,1513254023.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:23.951Z,1513254023.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:24.347Z,1513254024.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:24.362Z,1513254024.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:24.707Z,1513254024.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:24.743Z,1513254024.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:25.107Z,1513254025.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:25.142Z,1513254025.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:25.512Z,1513254025.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:25.547Z,1513254025.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:25.907Z,1513254025.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:25.950Z,1513254025.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:26.358Z,1513254026.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:26.397Z,1513254026.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:26.727Z,1513254026.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:26.750Z,1513254026.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:27.126Z,1513254027.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:27.153Z,1513254027.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:27.513Z,1513254027.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:27.528Z,1513254027.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:27.910Z,1513254027.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:27.925Z,1513254027.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:28.328Z,1513254028.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:28.366Z,1513254028.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:28.712Z,1513254028.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:28.745Z,1513254028.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:29.119Z,1513254029.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:29.214Z,1513254029.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:29.551Z,1513254029.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:29.584Z,1513254029.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:29.929Z,1513254029.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:29.979Z,1513254029.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:30.332Z,1513254030.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:30.355Z,1513254030.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:30.708Z,1513254030.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:30.769Z,1513254030.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:31.122Z,1513254031.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:31.137Z,1513254031.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:31.520Z,1513254031.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:31.537Z,1513254031.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:31.907Z,1513254031.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:31.939Z,1513254031.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:32.387Z,1513254032.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:32.407Z,1513254032.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:32.737Z,1513254032.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:32.777Z,1513254032.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:33.129Z,1513254033.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:33.143Z,1513254033.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:33.515Z,1513254033.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:33.531Z,1513254033.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:33.919Z,1513254033.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:33.934Z,1513254033.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:34.315Z,1513254034.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:34.335Z,1513254034.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:34.718Z,1513254034.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:34.732Z,1513254034.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:35.115Z,1513254035.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:35.134Z,1513254035.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:35.525Z,1513254035.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:35.540Z,1513254035.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:35.946Z,1513254035.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:35.998Z,1513254035.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:36.325Z,1513254036.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:36.348Z,1513254036.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:36.714Z,1513254036.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:36.735Z,1513254036.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:37.118Z,1513254037.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:37.132Z,1513254037.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:37.519Z,1513254037.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:37.534Z,1513254037.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:37.939Z,1513254037.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:37.971Z,1513254037.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:38.341Z,1513254038.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:38.379Z,1513254038.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:38.729Z,1513254038.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:38.746Z,1513254038.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:39.138Z,1513254039.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:39.216Z,1513254039.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:39.518Z,1513254039.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:39.535Z,1513254039.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:39.922Z,1513254039.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:39.940Z,1513254039.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:40.338Z,1513254040.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:40.356Z,1513254040.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:40.708Z,1513254040.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:40.740Z,1513254040.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:41.111Z,1513254041.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:41.138Z,1513254041.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:41.526Z,1513254041.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:41.541Z,1513254041.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:41.931Z,1513254041.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:41.946Z,1513254041.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:42.350Z,1513254042.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:42.384Z,1513254042.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:42.708Z,1513254042.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:42.743Z,1513254042.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:43.107Z,1513254043.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:43.142Z,1513254043.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:43.512Z,1513254043.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:43.537Z,1513254043.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:43.907Z,1513254043.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:43.943Z,1513254043.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:44.346Z,1513254044.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:44.361Z,1513254044.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:44.730Z,1513254044.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:44.802Z,1513254044.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:45.118Z,1513254045.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:45.151Z,1513254045.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:45.507Z,1513254045.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:45.574Z,1513254045.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:45.916Z,1513254045.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:45.935Z,1513254045.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:46.368Z,1513254046.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:46.419Z,1513254046.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:46.712Z,1513254046.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:46.751Z,1513254046.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:47.112Z,1513254047.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:47.139Z,1513254047.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:47.526Z,1513254047.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:47.542Z,1513254047.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:47.929Z,1513254047.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:47.944Z,1513254047.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:48.326Z,1513254048.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:48.340Z,1513254048.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:48.707Z,1513254048.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:48.776Z,1513254048.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:49.108Z,1513254049.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:49.140Z,1513254049.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:49.512Z,1513254049.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:49.540Z,1513254049.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:49.907Z,1513254049.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:49.947Z,1513254049.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:50.334Z,1513254050.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:50.350Z,1513254050.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:50.729Z,1513254050.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:50.749Z,1513254050.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:51.135Z,1513254051.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:51.151Z,1513254051.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:51.507Z,1513254051.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:51.593Z,1513254051.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:51.954Z,1513254051.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:51.983Z,1513254051.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:52.325Z,1513254052.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:52.402Z,1513254052.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:52.713Z,1513254052.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:52.743Z,1513254052.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:53.120Z,1513254053.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:53.179Z,1513254053.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:53.530Z,1513254053.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:53.563Z,1513254053.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:53.922Z,1513254053.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:53.936Z,1513254053.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:54.355Z,1513254054.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:54.370Z,1513254054.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:54.714Z,1513254054.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:54.739Z,1513254054.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:55.159Z,1513254055.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:55.174Z,1513254055.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:55.513Z,1513254055.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:55.528Z,1513254055.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:55.908Z,1513254055.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:55.924Z,1513254055.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:56.355Z,1513254056.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:56.379Z,1513254056.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:56.733Z,1513254056.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:56.759Z,1513254056.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:57.125Z,1513254057.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:57.152Z,1513254057.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:57.517Z,1513254057.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:57.531Z,1513254057.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:57.907Z,1513254057.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:57.930Z,1513254057.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:58.370Z,1513254058.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:58.417Z,1513254058.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:58.715Z,1513254058.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:58.740Z,1513254058.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:59.120Z,1513254059.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:59.139Z,1513254059.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:20:59.523Z,1513254059.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:20:59.543Z,1513254059.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:03.024Z,1513254063.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:03.075Z,1513254063.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:03.190Z,1513254063.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:03.226Z,1513254063.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:03.529Z,1513254063.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:03.544Z,1513254063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:03.931Z,1513254063.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:03.947Z,1513254063.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:04.328Z,1513254064.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:04.347Z,1513254064.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:04.737Z,1513254064.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:04.775Z,1513254064.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:05.133Z,1513254065.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:05.152Z,1513254065.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:05.543Z,1513254065.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:05.571Z,1513254065.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:06.010Z,1513254066.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:06.025Z,1513254066.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:06.341Z,1513254066.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:06.380Z,1513254066.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:06.732Z,1513254066.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:06.747Z,1513254066.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:07.134Z,1513254067.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:07.149Z,1513254067.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:07.530Z,1513254067.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:07.551Z,1513254067.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:07.938Z,1513254067.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:07.983Z,1513254067.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:08.355Z,1513254068.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:08.380Z,1513254068.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:08.737Z,1513254068.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:08.753Z,1513254068.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:09.146Z,1513254069.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:09.177Z,1513254069.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:09.530Z,1513254069.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:09.557Z,1513254069.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:09.939Z,1513254069.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:09.954Z,1513254069.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:10.333Z,1513254070.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:10.378Z,1513254070.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:10.732Z,1513254070.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:10.748Z,1513254070.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:11.187Z,1513254071.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:11.219Z,1513254071.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:11.548Z,1513254071.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:11.563Z,1513254071.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:11.956Z,1513254071.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:11.971Z,1513254071.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:12.355Z,1513254072.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:12.371Z,1513254072.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:12.723Z,1513254072.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:12.763Z,1513254072.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:13.126Z,1513254073.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:13.154Z,1513254073.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:13.527Z,1513254073.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:13.542Z,1513254073.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:13.931Z,1513254073.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:13.972Z,1513254073.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:14.393Z,1513254074.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:14.440Z,1513254074.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:14.756Z,1513254074.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:14.822Z,1513254074.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:15.147Z,1513254075.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:15.211Z,1513254075.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:15.527Z,1513254075.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:15.563Z,1513254075.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:15.924Z,1513254075.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:15.971Z,1513254075.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:16.324Z,1513254076.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:16.403Z,1513254076.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:16.737Z,1513254076.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:16.791Z,1513254076.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:17.134Z,1513254077.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:17.151Z,1513254077.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:17.544Z,1513254077.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:17.618Z,1513254077.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:17.968Z,1513254077.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:17.992Z,1513254077.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:18.336Z,1513254078.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:18.379Z,1513254078.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:18.755Z,1513254078.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:18.804Z,1513254078.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:19.126Z,1513254079.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:19.159Z,1513254079.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:19.526Z,1513254079.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:19.602Z,1513254079.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:19.926Z,1513254079.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:19.965Z,1513254079.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:20.336Z,1513254080.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:20.406Z,1513254080.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:20.753Z,1513254080.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:20.785Z,1513254080.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:21.137Z,1513254081.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:21.181Z,1513254081.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:21.530Z,1513254081.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:21.564Z,1513254081.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:21.927Z,1513254081.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:21.998Z,1513254081.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:22.326Z,1513254082.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:22.379Z,1513254082.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:22.726Z,1513254082.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:22.763Z,1513254082.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:23.124Z,1513254083.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:23.182Z,1513254083.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:23.555Z,1513254083.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:23.605Z,1513254083.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:23.980Z,1513254083.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:24.035Z,1513254084.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:24.331Z,1513254084.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:24.375Z,1513254084.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:24.761Z,1513254084.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:24.777Z,1513254084.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:25.135Z,1513254085.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:25.195Z,1513254085.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:25.534Z,1513254085.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:25.549Z,1513254085.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:25.933Z,1513254085.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:25.949Z,1513254085.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:26.363Z,1513254086.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:26.392Z,1513254086.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:26.742Z,1513254086.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:26.757Z,1513254086.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:27.147Z,1513254087.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:27.167Z,1513254087.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:27.523Z,1513254087.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:27.549Z,1513254087.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:27.549Z,1513254087.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 236
2017-12-14T12:21:27.549Z,1513254087.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:21:27.551Z,1513254087.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:27.551Z,1513254087.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 236
2017-12-14T12:21:27.551Z,1513254087.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:21:27.554Z,1513254087.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:27.554Z,1513254087.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 236
2017-12-14T12:21:27.554Z,1513254087.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:21:27.608Z,1513254087.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:21:27.608Z,1513254087.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:21:27.608Z,1513254087.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:21:27.923Z,1513254087.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:27.972Z,1513254087.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:21:27.972Z,1513254087.972 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 236
2017-12-14T12:21:27.973Z,1513254087.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:21:27.973Z,1513254087.973 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 236
2017-12-14T12:21:27.973Z,1513254087.973 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:21:27.973Z,1513254087.973 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 236
2017-12-14T12:21:28.366Z,1513254088.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:28.400Z,1513254088.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:21:28.400Z,1513254088.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:21:28.413Z,1513254088.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:21:28.413Z,1513254088.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:21:28.414Z,1513254088.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:21:28.414Z,1513254088.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:21:28.415Z,1513254088.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:21:28.415Z,1513254088.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:21:28.415Z,1513254088.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:21:28.726Z,1513254088.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:28.773Z,1513254088.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:29.134Z,1513254089.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:29.195Z,1513254089.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:29.537Z,1513254089.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:29.575Z,1513254089.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:29.949Z,1513254089.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:29.987Z,1513254089.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:30.343Z,1513254090.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:30.427Z,1513254090.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:30.734Z,1513254090.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:30.760Z,1513254090.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:31.135Z,1513254091.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:31.163Z,1513254091.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:31.526Z,1513254091.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:31.568Z,1513254091.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:31.925Z,1513254091.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:31.965Z,1513254091.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:32.336Z,1513254092.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:32.375Z,1513254092.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:32.765Z,1513254092.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:32.817Z,1513254092.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:33.136Z,1513254093.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:33.236Z,1513254093.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:33.538Z,1513254093.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:33.566Z,1513254093.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:33.946Z,1513254093.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:34.008Z,1513254094.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:34.360Z,1513254094.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:34.404Z,1513254094.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:34.726Z,1513254094.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:34.761Z,1513254094.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:35.146Z,1513254095.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:35.169Z,1513254095.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:35.536Z,1513254095.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:35.583Z,1513254095.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:35.940Z,1513254095.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:35.972Z,1513254095.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:36.336Z,1513254096.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:36.375Z,1513254096.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:36.729Z,1513254096.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:36.773Z,1513254096.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:37.134Z,1513254097.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:37.239Z,1513254097.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:37.535Z,1513254097.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:37.630Z,1513254097.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:37.936Z,1513254097.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:37.968Z,1513254097.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:38.346Z,1513254098.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:38.404Z,1513254098.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:38.750Z,1513254098.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:38.773Z,1513254098.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:39.136Z,1513254099.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:39.207Z,1513254099.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:39.525Z,1513254099.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:39.564Z,1513254099.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:39.928Z,1513254099.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:39.969Z,1513254099.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:40.326Z,1513254100.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:40.395Z,1513254100.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:40.735Z,1513254100.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:40.755Z,1513254100.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:41.134Z,1513254101.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:41.162Z,1513254101.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:41.544Z,1513254101.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:41.572Z,1513254101.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:41.943Z,1513254101.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:41.979Z,1513254101.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:42.375Z,1513254102.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:42.418Z,1513254102.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:42.724Z,1513254102.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:42.767Z,1513254102.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:43.141Z,1513254103.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:43.179Z,1513254103.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:43.535Z,1513254103.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:43.582Z,1513254103.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:43.935Z,1513254103.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:44.004Z,1513254104.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:44.356Z,1513254104.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:44.387Z,1513254104.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:44.740Z,1513254104.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:44.783Z,1513254104.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:45.135Z,1513254105.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:45.159Z,1513254105.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:45.531Z,1513254105.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:45.588Z,1513254105.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:45.923Z,1513254105.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:45.964Z,1513254105.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:46.320Z,1513254106.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:46.335Z,1513254106.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:46.724Z,1513254106.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:46.766Z,1513254106.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:47.123Z,1513254107.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:47.139Z,1513254107.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:47.534Z,1513254107.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:47.577Z,1513254107.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:47.942Z,1513254107.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:47.971Z,1513254107.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:48.343Z,1513254108.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:48.368Z,1513254108.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:48.735Z,1513254108.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:48.771Z,1513254108.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:49.128Z,1513254109.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:49.143Z,1513254109.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:49.528Z,1513254109.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:49.550Z,1513254109.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:49.928Z,1513254109.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:49.975Z,1513254109.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:50.338Z,1513254110.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:50.355Z,1513254110.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:50.743Z,1513254110.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:50.779Z,1513254110.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:51.202Z,1513254111.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:51.232Z,1513254111.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:51.531Z,1513254111.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:51.551Z,1513254111.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:51.936Z,1513254111.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:51.951Z,1513254111.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:52.336Z,1513254112.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:52.352Z,1513254112.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:52.728Z,1513254112.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:52.759Z,1513254112.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:53.185Z,1513254113.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:53.243Z,1513254113.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:53.541Z,1513254113.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:53.560Z,1513254113.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:53.942Z,1513254113.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:53.963Z,1513254113.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:54.342Z,1513254114.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:54.357Z,1513254114.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:54.755Z,1513254114.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:54.788Z,1513254114.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:55.132Z,1513254115.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:55.157Z,1513254115.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:55.533Z,1513254115.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:55.562Z,1513254115.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:55.928Z,1513254115.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:55.954Z,1513254115.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:56.398Z,1513254116.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:56.428Z,1513254116.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:56.742Z,1513254116.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:56.776Z,1513254116.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:57.153Z,1513254117.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:57.168Z,1513254117.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:57.524Z,1513254117.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:57.562Z,1513254117.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:57.923Z,1513254117.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:57.967Z,1513254117.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:58.331Z,1513254118.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:58.367Z,1513254118.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:58.732Z,1513254118.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:58.748Z,1513254118.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:59.132Z,1513254119.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:59.147Z,1513254119.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:21:59.546Z,1513254119.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:21:59.656Z,1513254119.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:03.195Z,1513254123.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:03.211Z,1513254123.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:03.318Z,1513254123.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:03.344Z,1513254123.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:03.694Z,1513254123.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:03.709Z,1513254123.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:04.088Z,1513254124.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:04.130Z,1513254124.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:04.492Z,1513254124.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:04.529Z,1513254124.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:04.890Z,1513254124.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:04.951Z,1513254124.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:05.305Z,1513254125.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:05.329Z,1513254125.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:05.705Z,1513254125.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:05.731Z,1513254125.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:06.108Z,1513254126.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:06.146Z,1513254126.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:06.497Z,1513254126.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:06.512Z,1513254126.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:06.885Z,1513254126.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:06.901Z,1513254126.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:07.283Z,1513254127.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:07.298Z,1513254127.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:07.688Z,1513254127.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:07.703Z,1513254127.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:08.077Z,1513254128.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:08.092Z,1513254128.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:08.502Z,1513254128.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:08.517Z,1513254128.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:08.897Z,1513254128.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:08.913Z,1513254128.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:09.297Z,1513254129.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:09.316Z,1513254129.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:09.683Z,1513254129.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:09.703Z,1513254129.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:10.085Z,1513254130.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:10.107Z,1513254130.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:10.484Z,1513254130.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:10.512Z,1513254130.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:10.883Z,1513254130.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:10.927Z,1513254130.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:11.300Z,1513254131.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:11.339Z,1513254131.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:11.699Z,1513254131.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:11.736Z,1513254131.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:12.099Z,1513254132.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:12.147Z,1513254132.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:12.489Z,1513254132.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:12.509Z,1513254132.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:12.883Z,1513254132.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:12.903Z,1513254132.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:13.289Z,1513254133.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:13.338Z,1513254133.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:13.343Z,1513254133.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:13.691Z,1513254133.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:13.705Z,1513254133.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:13.742Z,1513254133.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:14.091Z,1513254134.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:14.111Z,1513254134.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:14.145Z,1513254134.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:14.498Z,1513254134.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:14.513Z,1513254134.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:14.906Z,1513254134.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:14.922Z,1513254134.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:15.306Z,1513254135.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:15.320Z,1513254135.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:15.699Z,1513254135.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:15.739Z,1513254135.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:16.089Z,1513254136.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:16.104Z,1513254136.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:16.484Z,1513254136.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:16.500Z,1513254136.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:16.883Z,1513254136.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:16.927Z,1513254136.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:17.307Z,1513254137.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:17.328Z,1513254137.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:17.709Z,1513254137.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:17.724Z,1513254137.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:18.094Z,1513254138.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:18.127Z,1513254138.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:18.488Z,1513254138.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:18.519Z,1513254138.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:18.929Z,1513254138.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:18.978Z,1513254138.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:19.283Z,1513254139.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:19.323Z,1513254139.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:19.691Z,1513254139.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:19.729Z,1513254139.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:20.087Z,1513254140.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:20.123Z,1513254140.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:20.517Z,1513254140.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:20.532Z,1513254140.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:20.919Z,1513254140.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:20.939Z,1513254140.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:21.302Z,1513254141.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:21.329Z,1513254141.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:21.689Z,1513254141.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:21.704Z,1513254141.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:22.124Z,1513254142.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:22.180Z,1513254142.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:22.493Z,1513254142.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:22.508Z,1513254142.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:22.888Z,1513254142.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:22.915Z,1513254142.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:23.302Z,1513254143.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:23.323Z,1513254143.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:23.705Z,1513254143.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:23.721Z,1513254143.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:24.101Z,1513254144.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:24.123Z,1513254144.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:24.498Z,1513254144.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:24.519Z,1513254144.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:24.891Z,1513254144.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:24.911Z,1513254144.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:25.291Z,1513254145.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:25.331Z,1513254145.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:25.684Z,1513254145.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:25.736Z,1513254145.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:26.080Z,1513254146.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:26.107Z,1513254146.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:26.493Z,1513254146.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:26.518Z,1513254146.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:26.916Z,1513254146.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:26.971Z,1513254146.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:27.299Z,1513254147.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:27.323Z,1513254147.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:27.691Z,1513254147.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:27.735Z,1513254147.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:27.819Z,1513254147.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:28.091Z,1513254148.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:28.125Z,1513254148.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:28.491Z,1513254148.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:28.615Z,1513254148.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:28.635Z,1513254148.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:28.890Z,1513254148.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:28.908Z,1513254148.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:29.045Z,1513254149.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:29.305Z,1513254149.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:29.335Z,1513254149.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:29.705Z,1513254149.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:29.736Z,1513254149.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:30.106Z,1513254150.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:30.120Z,1513254150.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:30.492Z,1513254150.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:30.511Z,1513254150.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:30.884Z,1513254150.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:30.912Z,1513254150.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:31.294Z,1513254151.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:31.309Z,1513254151.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:31.693Z,1513254151.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:31.708Z,1513254151.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:32.092Z,1513254152.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:32.106Z,1513254152.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:32.496Z,1513254152.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:32.511Z,1513254152.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:32.902Z,1513254152.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:32.918Z,1513254152.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:33.298Z,1513254153.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:33.313Z,1513254153.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:33.692Z,1513254153.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:33.707Z,1513254153.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:34.097Z,1513254154.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:34.112Z,1513254154.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:34.492Z,1513254154.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:34.507Z,1513254154.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:34.927Z,1513254154.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:34.956Z,1513254154.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:35.319Z,1513254155.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:35.349Z,1513254155.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:35.706Z,1513254155.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:35.720Z,1513254155.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:36.101Z,1513254156.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:36.148Z,1513254156.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:36.490Z,1513254156.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:36.504Z,1513254156.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:36.889Z,1513254156.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:36.917Z,1513254156.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:37.292Z,1513254157.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:37.308Z,1513254157.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:37.693Z,1513254157.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:37.709Z,1513254157.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:38.102Z,1513254158.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:38.135Z,1513254158.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:38.499Z,1513254158.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:38.527Z,1513254158.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:38.902Z,1513254158.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:38.918Z,1513254158.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:39.300Z,1513254159.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:39.317Z,1513254159.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:39.694Z,1513254159.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:39.709Z,1513254159.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:40.097Z,1513254160.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:40.112Z,1513254160.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:40.525Z,1513254160.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:40.547Z,1513254160.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:40.905Z,1513254160.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:40.963Z,1513254160.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:41.307Z,1513254161.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:41.346Z,1513254161.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:41.705Z,1513254161.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:41.731Z,1513254161.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:42.093Z,1513254162.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:42.123Z,1513254162.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:42.487Z,1513254162.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:42.518Z,1513254162.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:42.883Z,1513254162.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:42.903Z,1513254162.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:43.289Z,1513254163.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:43.304Z,1513254163.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:43.692Z,1513254163.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:43.708Z,1513254163.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:44.088Z,1513254164.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:44.107Z,1513254164.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:44.568Z,1513254164.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:44.618Z,1513254164.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:44.907Z,1513254164.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:45.020Z,1513254165.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:45.307Z,1513254165.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:45.327Z,1513254165.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:45.690Z,1513254165.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:45.712Z,1513254165.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:46.097Z,1513254166.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:46.113Z,1513254166.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:46.493Z,1513254166.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:46.508Z,1513254166.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:46.886Z,1513254166.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:46.919Z,1513254166.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:47.326Z,1513254167.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:47.424Z,1513254167.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:47.722Z,1513254167.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:47.754Z,1513254167.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:48.103Z,1513254168.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:48.199Z,1513254168.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:48.492Z,1513254168.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:48.507Z,1513254168.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:48.895Z,1513254168.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:48.936Z,1513254168.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:49.292Z,1513254169.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:49.346Z,1513254169.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:49.689Z,1513254169.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:49.703Z,1513254169.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:50.094Z,1513254170.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:50.139Z,1513254170.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:50.506Z,1513254170.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:50.529Z,1513254170.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:50.944Z,1513254170.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:50.964Z,1513254170.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:51.294Z,1513254171.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:51.308Z,1513254171.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:51.693Z,1513254171.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:51.707Z,1513254171.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:52.090Z,1513254172.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:52.104Z,1513254172.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:52.490Z,1513254172.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:52.522Z,1513254172.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:52.886Z,1513254172.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:52.919Z,1513254172.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:53.301Z,1513254173.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:53.316Z,1513254173.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:53.701Z,1513254173.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:53.716Z,1513254173.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:54.128Z,1513254174.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:54.199Z,1513254174.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:54.501Z,1513254174.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:54.515Z,1513254174.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:54.884Z,1513254174.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:54.911Z,1513254174.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:55.283Z,1513254175.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:55.315Z,1513254175.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:55.688Z,1513254175.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:55.714Z,1513254175.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:56.087Z,1513254176.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:56.112Z,1513254176.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:56.500Z,1513254176.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:56.519Z,1513254176.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:56.907Z,1513254176.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:56.921Z,1513254176.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:57.324Z,1513254177.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:57.359Z,1513254177.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:57.683Z,1513254177.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:57.724Z,1513254177.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:58.077Z,1513254178.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:58.099Z,1513254178.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:58.484Z,1513254178.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:58.535Z,1513254178.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:58.891Z,1513254178.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:58.918Z,1513254178.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:59.306Z,1513254179.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:59.324Z,1513254179.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:22:59.708Z,1513254179.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:22:59.723Z,1513254179.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:03.425Z,1513254183.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:03.440Z,1513254183.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:03.540Z,1513254183.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:03.578Z,1513254183.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:03.927Z,1513254183.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:03.947Z,1513254183.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:04.337Z,1513254184.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:04.375Z,1513254184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:04.730Z,1513254184.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:04.752Z,1513254184.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:05.123Z,1513254185.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:05.147Z,1513254185.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:05.535Z,1513254185.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:05.551Z,1513254185.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:05.938Z,1513254185.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:05.955Z,1513254185.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:06.382Z,1513254186.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:06.399Z,1513254186.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:06.724Z,1513254186.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:06.748Z,1513254186.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:07.138Z,1513254187.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:07.154Z,1513254187.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:07.535Z,1513254187.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:07.551Z,1513254187.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:07.932Z,1513254187.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:07.981Z,1513254187.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:08.338Z,1513254188.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:08.355Z,1513254188.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:08.754Z,1513254188.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:08.786Z,1513254188.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:09.139Z,1513254189.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:09.155Z,1513254189.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:09.523Z,1513254189.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:09.554Z,1513254189.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:09.962Z,1513254189.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:10.011Z,1513254190.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:10.320Z,1513254190.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:10.348Z,1513254190.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:10.721Z,1513254190.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:10.776Z,1513254190.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:11.119Z,1513254191.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:11.157Z,1513254191.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:11.553Z,1513254191.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:11.568Z,1513254191.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:11.944Z,1513254191.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:11.961Z,1513254191.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:12.340Z,1513254192.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:12.374Z,1513254192.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:12.717Z,1513254192.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:12.744Z,1513254192.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:13.126Z,1513254193.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:13.170Z,1513254193.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:13.526Z,1513254193.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:13.534Z,1513254193.534 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:23:13.535Z,1513254193.535 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:23:13.535Z,1513254193.535 [BPC1](ERROR): Communications Fault
2017-12-14T12:23:13.568Z,1513254193.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:13.582Z,1513254193.582 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:23:13.917Z,1513254193.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:13.932Z,1513254193.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:14.335Z,1513254194.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:14.362Z,1513254194.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:14.757Z,1513254194.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:14.772Z,1513254194.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:14.786Z,1513254194.786 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:23:14.786Z,1513254194.786 [BPC1] No Fault, FailCount= 1
2017-12-14T12:23:15.137Z,1513254195.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:15.223Z,1513254195.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:15.523Z,1513254195.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:15.563Z,1513254195.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:15.927Z,1513254195.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:15.941Z,1513254195.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:16.374Z,1513254196.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:16.411Z,1513254196.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:16.725Z,1513254196.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:16.741Z,1513254196.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:17.127Z,1513254197.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:17.147Z,1513254197.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:17.541Z,1513254197.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:17.576Z,1513254197.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:17.934Z,1513254197.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:17.949Z,1513254197.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:18.341Z,1513254198.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:18.378Z,1513254198.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:18.725Z,1513254198.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:18.748Z,1513254198.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:19.127Z,1513254199.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:19.147Z,1513254199.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:19.563Z,1513254199.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:19.579Z,1513254199.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:19.929Z,1513254199.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:19.943Z,1513254199.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:20.378Z,1513254200.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:20.403Z,1513254200.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:20.737Z,1513254200.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:20.753Z,1513254200.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:21.134Z,1513254201.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:21.149Z,1513254201.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:21.530Z,1513254201.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:21.546Z,1513254201.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:21.927Z,1513254201.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:21.942Z,1513254201.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:22.326Z,1513254202.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:22.340Z,1513254202.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:22.758Z,1513254202.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:22.799Z,1513254202.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:23.119Z,1513254203.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:23.151Z,1513254203.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:23.542Z,1513254203.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:23.595Z,1513254203.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:23.946Z,1513254203.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:23.961Z,1513254203.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:24.338Z,1513254204.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:24.353Z,1513254204.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:24.719Z,1513254204.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:24.751Z,1513254204.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:25.120Z,1513254205.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:25.156Z,1513254205.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:25.523Z,1513254205.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:25.551Z,1513254205.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:25.954Z,1513254205.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:26.003Z,1513254206.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:26.338Z,1513254206.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:26.354Z,1513254206.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:26.740Z,1513254206.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:26.760Z,1513254206.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:27.147Z,1513254207.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:27.162Z,1513254207.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:27.524Z,1513254207.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:27.551Z,1513254207.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:27.919Z,1513254207.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:27.956Z,1513254207.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:28.321Z,1513254208.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:28.364Z,1513254208.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:28.718Z,1513254208.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:28.749Z,1513254208.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:29.154Z,1513254209.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:29.197Z,1513254209.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:29.548Z,1513254209.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:29.563Z,1513254209.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:29.947Z,1513254209.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:29.974Z,1513254209.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:30.330Z,1513254210.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:30.357Z,1513254210.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:30.727Z,1513254210.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:30.750Z,1513254210.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:31.119Z,1513254211.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:31.155Z,1513254211.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:31.520Z,1513254211.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:31.556Z,1513254211.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:31.924Z,1513254211.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:31.957Z,1513254211.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:32.379Z,1513254212.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:32.411Z,1513254212.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:32.733Z,1513254212.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:32.770Z,1513254212.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:33.148Z,1513254213.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:33.167Z,1513254213.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:33.523Z,1513254213.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:33.555Z,1513254213.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:33.923Z,1513254213.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:33.963Z,1513254213.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:34.385Z,1513254214.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:34.425Z,1513254214.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:34.732Z,1513254214.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:34.771Z,1513254214.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:35.134Z,1513254215.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:35.200Z,1513254215.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:35.573Z,1513254215.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:35.634Z,1513254215.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:35.941Z,1513254215.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:36.014Z,1513254216.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:36.327Z,1513254216.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:36.363Z,1513254216.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:36.730Z,1513254216.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:36.746Z,1513254216.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:37.124Z,1513254217.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:37.140Z,1513254217.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:37.537Z,1513254217.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:37.570Z,1513254217.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:37.930Z,1513254217.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:37.944Z,1513254217.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:38.334Z,1513254218.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:38.351Z,1513254218.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:38.750Z,1513254218.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:38.798Z,1513254218.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:39.119Z,1513254219.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:39.155Z,1513254219.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:39.524Z,1513254219.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:39.560Z,1513254219.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:39.919Z,1513254219.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:39.944Z,1513254219.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:40.342Z,1513254220.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:40.358Z,1513254220.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:40.747Z,1513254220.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:40.764Z,1513254220.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:41.142Z,1513254221.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:41.159Z,1513254221.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:41.524Z,1513254221.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:41.551Z,1513254221.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:41.956Z,1513254221.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:41.991Z,1513254221.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:42.347Z,1513254222.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:42.370Z,1513254222.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:42.747Z,1513254222.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:42.763Z,1513254222.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:43.146Z,1513254223.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:43.161Z,1513254223.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:43.543Z,1513254223.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:43.559Z,1513254223.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:43.919Z,1513254223.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:43.959Z,1513254223.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:44.321Z,1513254224.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:44.398Z,1513254224.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:44.720Z,1513254224.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:44.751Z,1513254224.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:45.166Z,1513254225.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:45.208Z,1513254225.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:45.542Z,1513254225.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:45.568Z,1513254225.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:45.948Z,1513254225.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:45.963Z,1513254225.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:46.345Z,1513254226.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:46.360Z,1513254226.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:46.724Z,1513254226.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:46.758Z,1513254226.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:47.119Z,1513254227.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:47.151Z,1513254227.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:47.520Z,1513254227.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:47.552Z,1513254227.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:47.919Z,1513254227.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:47.946Z,1513254227.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:48.408Z,1513254228.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:48.428Z,1513254228.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:48.758Z,1513254228.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:48.773Z,1513254228.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:49.135Z,1513254229.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:49.171Z,1513254229.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:49.538Z,1513254229.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:49.565Z,1513254229.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:49.928Z,1513254229.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:49.943Z,1513254229.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:50.322Z,1513254230.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:50.337Z,1513254230.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:50.731Z,1513254230.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:50.747Z,1513254230.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:51.129Z,1513254231.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:51.144Z,1513254231.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:51.543Z,1513254231.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:51.615Z,1513254231.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:51.943Z,1513254231.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:51.979Z,1513254231.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:52.338Z,1513254232.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:52.365Z,1513254232.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:52.727Z,1513254232.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:52.743Z,1513254232.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:53.129Z,1513254233.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:53.146Z,1513254233.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:53.530Z,1513254233.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:53.544Z,1513254233.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:53.828Z,1513254233.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:53.928Z,1513254233.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:53.944Z,1513254233.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:54.342Z,1513254234.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:54.374Z,1513254234.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:54.621Z,1513254234.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:54.752Z,1513254234.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:54.790Z,1513254234.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:55.025Z,1513254235.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:55.137Z,1513254235.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:55.202Z,1513254235.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:55.532Z,1513254235.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:55.548Z,1513254235.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:55.822Z,1513254235.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:55.930Z,1513254235.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:55.945Z,1513254235.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:56.332Z,1513254236.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:56.411Z,1513254236.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:56.617Z,1513254236.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:56.719Z,1513254236.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:56.752Z,1513254236.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:57.023Z,1513254237.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:57.119Z,1513254237.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:57.147Z,1513254237.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:57.535Z,1513254237.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:57.595Z,1513254237.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:57.818Z,1513254237.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:57.939Z,1513254237.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:57.978Z,1513254237.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:58.332Z,1513254238.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:58.379Z,1513254238.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:58.613Z,1513254238.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:58.727Z,1513254238.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:58.760Z,1513254238.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:58.764Z,1513254238.764 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:23:58.764Z,1513254238.764 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:23:58.764Z,1513254238.764 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:23:58.764Z,1513254238.764 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:23:59.018Z,1513254239.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:59.127Z,1513254239.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:59.161Z,1513254239.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:59.165Z,1513254239.165 [Default:CheckIn:D] Stopped
2017-12-14T12:23:59.165Z,1513254239.165 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:23:59.519Z,1513254239.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:59.533Z,1513254239.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:23:59.557Z,1513254239.557 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.729557 min 
2017-12-14T12:23:59.557Z,1513254239.557 [Default:CheckIn:E] Stopped
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn] Stopped
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn](INFO): Running loop #69
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn] Running Loop=69
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:23:59.558Z,1513254239.558 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:23:59.813Z,1513254239.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:59.925Z,1513254239.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:23:59.940Z,1513254239.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:00.610Z,1513254240.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:01.017Z,1513254241.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:01.813Z,1513254241.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:02.611Z,1513254242.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:03.017Z,1513254243.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:03.352Z,1513254243.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:03.367Z,1513254243.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:03.478Z,1513254243.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:03.505Z,1513254243.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:03.839Z,1513254243.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:03.867Z,1513254243.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:04.241Z,1513254244.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:04.261Z,1513254244.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:04.647Z,1513254244.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:04.691Z,1513254244.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:05.024Z,1513254245.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:05.048Z,1513254245.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:05.430Z,1513254245.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:05.445Z,1513254245.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:05.833Z,1513254245.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:05.848Z,1513254245.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:05.862Z,1513254245.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:06.226Z,1513254246.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:06.242Z,1513254246.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:06.663Z,1513254246.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:06.680Z,1513254246.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:06.739Z,1513254246.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:07.035Z,1513254247.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:07.053Z,1513254247.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:07.069Z,1513254247.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:07.454Z,1513254247.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:07.494Z,1513254247.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:07.826Z,1513254247.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:07.853Z,1513254247.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:07.866Z,1513254247.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:08.249Z,1513254248.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:08.330Z,1513254248.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:08.630Z,1513254248.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:08.662Z,1513254248.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:08.665Z,1513254248.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:09.028Z,1513254249.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:09.048Z,1513254249.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:09.065Z,1513254249.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:09.438Z,1513254249.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:09.473Z,1513254249.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:09.833Z,1513254249.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:09.848Z,1513254249.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:09.862Z,1513254249.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:10.286Z,1513254250.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:10.310Z,1513254250.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:10.635Z,1513254250.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:10.658Z,1513254250.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:10.674Z,1513254250.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:11.032Z,1513254251.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:11.048Z,1513254251.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:11.061Z,1513254251.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:11.434Z,1513254251.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:11.448Z,1513254251.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:11.833Z,1513254251.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:11.848Z,1513254251.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:11.858Z,1513254251.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:12.284Z,1513254252.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:12.329Z,1513254252.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:12.636Z,1513254252.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:12.654Z,1513254252.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:12.671Z,1513254252.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:13.037Z,1513254253.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:13.051Z,1513254253.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:13.057Z,1513254253.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:13.435Z,1513254253.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:13.451Z,1513254253.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:13.854Z,1513254253.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:13.881Z,1513254253.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:13.924Z,1513254253.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:14.258Z,1513254254.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:14.337Z,1513254254.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:14.618Z,1513254254.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:14.650Z,1513254254.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:14.655Z,1513254254.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:15.022Z,1513254255.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:15.053Z,1513254255.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:15.058Z,1513254255.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:15.449Z,1513254255.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:15.464Z,1513254255.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:15.846Z,1513254255.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:15.850Z,1513254255.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:15.871Z,1513254255.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:16.249Z,1513254256.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:16.263Z,1513254256.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:16.621Z,1513254256.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:16.636Z,1513254256.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:16.645Z,1513254256.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.049Z,1513254257.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.057Z,1513254257.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.086Z,1513254257.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:17.426Z,1513254257.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.465Z,1513254257.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:17.824Z,1513254257.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.846Z,1513254257.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:17.888Z,1513254257.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:18.228Z,1513254258.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:18.259Z,1513254258.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:18.642Z,1513254258.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:18.682Z,1513254258.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:18.704Z,1513254258.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:19.043Z,1513254259.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:19.045Z,1513254259.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:19.103Z,1513254259.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:19.444Z,1513254259.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:19.475Z,1513254259.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:19.827Z,1513254259.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:19.841Z,1513254259.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:19.844Z,1513254259.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:20.243Z,1513254260.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:20.287Z,1513254260.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:20.638Z,1513254260.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:20.663Z,1513254260.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:20.687Z,1513254260.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:21.015Z,1513254261.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:21.041Z,1513254261.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:21.076Z,1513254261.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:21.442Z,1513254261.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:21.450Z,1513254261.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x13621 got:0x6591
2017-12-14T12:24:21.476Z,1513254261.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:21.838Z,1513254261.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:21.850Z,1513254261.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:21.865Z,1513254261.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:22.264Z,1513254262.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:22.322Z,1513254262.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:22.623Z,1513254262.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:22.634Z,1513254262.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:22.667Z,1513254262.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:23.026Z,1513254263.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:23.037Z,1513254263.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:23.066Z,1513254263.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:23.455Z,1513254263.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:23.517Z,1513254263.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:23.827Z,1513254263.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:23.834Z,1513254263.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:23.843Z,1513254263.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:24.253Z,1513254264.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:24.320Z,1513254264.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:24.630Z,1513254264.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:24.638Z,1513254264.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:24.653Z,1513254264.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:25.034Z,1513254265.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:25.036Z,1513254265.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:25.051Z,1513254265.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:25.433Z,1513254265.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:25.447Z,1513254265.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:25.831Z,1513254265.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:25.850Z,1513254265.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:25.883Z,1513254265.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:26.220Z,1513254266.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:26.322Z,1513254266.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:26.625Z,1513254266.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:26.655Z,1513254266.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:26.687Z,1513254266.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:27.017Z,1513254267.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:27.029Z,1513254267.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:27.053Z,1513254267.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:27.424Z,1513254267.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:27.466Z,1513254267.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:27.826Z,1513254267.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:27.847Z,1513254267.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:27.862Z,1513254267.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:28.272Z,1513254268.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:28.338Z,1513254268.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:28.622Z,1513254268.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:28.628Z,1513254268.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:28.648Z,1513254268.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:28.648Z,1513254268.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 237
2017-12-14T12:24:28.648Z,1513254268.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:24:28.650Z,1513254268.650 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:28.650Z,1513254268.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 237
2017-12-14T12:24:28.650Z,1513254268.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:24:28.652Z,1513254268.652 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:28.652Z,1513254268.652 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 237
2017-12-14T12:24:28.652Z,1513254268.652 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:24:28.689Z,1513254268.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:24:28.689Z,1513254268.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:24:28.689Z,1513254268.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:24:29.018Z,1513254269.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:29.027Z,1513254269.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:29.086Z,1513254269.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:24:29.086Z,1513254269.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 237
2017-12-14T12:24:29.087Z,1513254269.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:24:29.087Z,1513254269.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 237
2017-12-14T12:24:29.087Z,1513254269.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:24:29.087Z,1513254269.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 237
2017-12-14T12:24:29.430Z,1513254269.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:29.486Z,1513254269.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:24:29.486Z,1513254269.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:24:29.486Z,1513254269.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:24:29.487Z,1513254269.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:24:29.487Z,1513254269.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:24:29.487Z,1513254269.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:24:29.488Z,1513254269.488 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:24:29.488Z,1513254269.488 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:24:29.489Z,1513254269.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:24:29.822Z,1513254269.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:29.855Z,1513254269.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:29.891Z,1513254269.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:30.224Z,1513254270.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:30.255Z,1513254270.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:30.617Z,1513254270.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:30.643Z,1513254270.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:30.679Z,1513254270.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:31.021Z,1513254271.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:31.038Z,1513254271.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:31.072Z,1513254271.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:31.431Z,1513254271.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:31.455Z,1513254271.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:31.818Z,1513254271.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:31.829Z,1513254271.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:31.844Z,1513254271.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:32.227Z,1513254272.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:32.245Z,1513254272.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:32.616Z,1513254272.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:32.657Z,1513254272.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:32.692Z,1513254272.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:33.049Z,1513254273.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:33.058Z,1513254273.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:33.099Z,1513254273.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:33.438Z,1513254273.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:33.460Z,1513254273.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:33.843Z,1513254273.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:33.846Z,1513254273.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:33.859Z,1513254273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:34.242Z,1513254274.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:34.257Z,1513254274.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:34.642Z,1513254274.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:34.663Z,1513254274.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:34.690Z,1513254274.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:35.020Z,1513254275.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:35.045Z,1513254275.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:35.047Z,1513254275.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:35.415Z,1513254275.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:35.452Z,1513254275.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:35.810Z,1513254275.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:35.824Z,1513254275.824 [PNI_TCM](ERROR): CRC does not match. Expected:0x65074 got:0x46697
2017-12-14T12:24:35.841Z,1513254275.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:35.856Z,1513254275.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:36.324Z,1513254276.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:36.363Z,1513254276.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:36.637Z,1513254276.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:36.645Z,1513254276.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:36.665Z,1513254276.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:37.034Z,1513254277.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:37.063Z,1513254277.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:37.435Z,1513254277.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:37.436Z,1513254277.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:37.466Z,1513254277.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:37.828Z,1513254277.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:37.858Z,1513254277.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:38.231Z,1513254278.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:38.258Z,1513254278.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:38.330Z,1513254278.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:38.629Z,1513254278.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:38.645Z,1513254278.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:38.693Z,1513254278.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:39.030Z,1513254279.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:39.045Z,1513254279.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:39.446Z,1513254279.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:39.467Z,1513254279.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:39.490Z,1513254279.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:39.834Z,1513254279.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:39.849Z,1513254279.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:40.282Z,1513254280.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:40.287Z,1513254280.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:40.359Z,1513254280.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:40.633Z,1513254280.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:40.642Z,1513254280.642 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T12:24:40.642Z,1513254280.642 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:24:40.642Z,1513254280.642 [BPC1](ERROR): Data Fault
2017-12-14T12:24:40.651Z,1513254280.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:40.664Z,1513254280.664 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:24:40.697Z,1513254280.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:41.025Z,1513254281.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:41.056Z,1513254281.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:41.434Z,1513254281.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:41.449Z,1513254281.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:41.494Z,1513254281.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:41.818Z,1513254281.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:41.841Z,1513254281.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:41.854Z,1513254281.854 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:24:41.854Z,1513254281.854 [BPC1] No Fault, FailCount= 1
2017-12-14T12:24:42.221Z,1513254282.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:42.290Z,1513254282.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:42.399Z,1513254282.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:42.599Z,1513254282.599 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:24:42.599Z,1513254282.599 [NAL9602] Data Fault, FailCount= 5
2017-12-14T12:24:42.599Z,1513254282.599 [NAL9602](ERROR): Data Fault
2017-12-14T12:24:42.627Z,1513254282.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:42.679Z,1513254282.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:42.693Z,1513254282.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:42.726Z,1513254282.726 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:24:42.726Z,1513254282.726 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T12:24:43.000Z,1513254283.000 [NAL9602](INFO): Powering down
2017-12-14T12:24:43.018Z,1513254283.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:43.058Z,1513254283.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:43.077Z,1513254283.077 [CBIT](INFO): Critical error at 20171214T122442
2017-12-14T12:24:43.412Z,1513254283.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:43.449Z,1513254283.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:43.490Z,1513254283.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:43.835Z,1513254283.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:43.855Z,1513254283.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:44.233Z,1513254284.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:44.248Z,1513254284.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:44.287Z,1513254284.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:44.617Z,1513254284.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:44.653Z,1513254284.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:44.741Z,1513254284.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:45.056Z,1513254285.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:45.091Z,1513254285.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:45.428Z,1513254285.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:45.443Z,1513254285.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:45.537Z,1513254285.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:45.823Z,1513254285.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:45.877Z,1513254285.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:46.235Z,1513254286.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:46.250Z,1513254286.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:46.333Z,1513254286.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:46.682Z,1513254286.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:46.712Z,1513254286.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:47.026Z,1513254287.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:47.041Z,1513254287.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:47.046Z,1513254287.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:47.426Z,1513254287.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:47.443Z,1513254287.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:47.826Z,1513254287.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:47.841Z,1513254287.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:47.842Z,1513254287.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:48.229Z,1513254288.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:48.245Z,1513254288.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:48.638Z,1513254288.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:48.657Z,1513254288.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:48.710Z,1513254288.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:49.050Z,1513254289.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:49.066Z,1513254289.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:49.104Z,1513254289.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:49.417Z,1513254289.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:49.451Z,1513254289.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:49.818Z,1513254289.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:49.845Z,1513254289.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:49.860Z,1513254289.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:50.248Z,1513254290.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:50.307Z,1513254290.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:50.626Z,1513254290.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:50.641Z,1513254290.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:50.664Z,1513254290.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:51.026Z,1513254291.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:51.045Z,1513254291.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:51.046Z,1513254291.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:51.428Z,1513254291.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:51.444Z,1513254291.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:51.827Z,1513254291.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:51.842Z,1513254291.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:51.844Z,1513254291.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:52.288Z,1513254292.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:52.353Z,1513254292.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:52.616Z,1513254292.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:52.637Z,1513254292.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:52.646Z,1513254292.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:53.014Z,1513254293.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:53.041Z,1513254293.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:53.057Z,1513254293.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:53.415Z,1513254293.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:53.448Z,1513254293.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:53.834Z,1513254293.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:53.838Z,1513254293.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:53.849Z,1513254293.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:54.217Z,1513254294.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:54.297Z,1513254294.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:54.624Z,1513254294.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:54.634Z,1513254294.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:54.660Z,1513254294.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:55.028Z,1513254295.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:55.037Z,1513254295.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:55.060Z,1513254295.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:55.426Z,1513254295.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:55.441Z,1513254295.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:55.824Z,1513254295.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:55.834Z,1513254295.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:55.841Z,1513254295.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:56.255Z,1513254296.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:56.330Z,1513254296.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:56.630Z,1513254296.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:56.633Z,1513254296.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:56.648Z,1513254296.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:57.022Z,1513254297.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:57.033Z,1513254297.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:57.057Z,1513254297.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:57.423Z,1513254297.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:57.450Z,1513254297.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:57.815Z,1513254297.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:57.831Z,1513254297.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:57.863Z,1513254297.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:58.218Z,1513254298.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:58.261Z,1513254298.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:58.626Z,1513254298.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:58.678Z,1513254298.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:58.717Z,1513254298.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:59.024Z,1513254299.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:59.029Z,1513254299.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:59.049Z,1513254299.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:59.419Z,1513254299.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:59.442Z,1513254299.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:24:59.823Z,1513254299.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:59.826Z,1513254299.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:24:59.857Z,1513254299.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:00.227Z,1513254300.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:00.256Z,1513254300.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:00.622Z,1513254300.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:01.033Z,1513254301.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:01.834Z,1513254301.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:02.631Z,1513254302.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:03.037Z,1513254303.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:03.802Z,1513254303.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:03.834Z,1513254303.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:03.892Z,1513254303.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:03.994Z,1513254303.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:04.031Z,1513254304.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:04.363Z,1513254304.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:04.390Z,1513254304.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:04.629Z,1513254304.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:04.779Z,1513254304.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:04.839Z,1513254304.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:05.034Z,1513254305.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:05.155Z,1513254305.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:05.186Z,1513254305.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:05.559Z,1513254305.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:05.632Z,1513254305.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:05.831Z,1513254305.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:05.956Z,1513254305.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:05.988Z,1513254305.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:06.355Z,1513254306.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:06.394Z,1513254306.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:06.625Z,1513254306.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:06.763Z,1513254306.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:06.790Z,1513254306.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:07.029Z,1513254307.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:07.163Z,1513254307.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:07.189Z,1513254307.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:07.555Z,1513254307.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:07.592Z,1513254307.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:07.826Z,1513254307.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:07.953Z,1513254307.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:07.968Z,1513254307.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:08.356Z,1513254308.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:08.371Z,1513254308.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:08.621Z,1513254308.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:08.760Z,1513254308.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:08.776Z,1513254308.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:09.026Z,1513254309.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:09.156Z,1513254309.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:09.171Z,1513254309.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:09.556Z,1513254309.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:09.591Z,1513254309.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:09.821Z,1513254309.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:09.960Z,1513254309.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:09.991Z,1513254309.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:10.356Z,1513254310.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:10.391Z,1513254310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:10.617Z,1513254310.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:10.756Z,1513254310.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:10.771Z,1513254310.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:11.021Z,1513254311.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:11.159Z,1513254311.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:11.175Z,1513254311.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:11.562Z,1513254311.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:11.588Z,1513254311.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:11.818Z,1513254311.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:11.962Z,1513254311.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:11.977Z,1513254311.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:12.381Z,1513254312.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:12.406Z,1513254312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:12.615Z,1513254312.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:12.763Z,1513254312.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:12.778Z,1513254312.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:13.025Z,1513254313.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:13.165Z,1513254313.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:13.180Z,1513254313.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:13.561Z,1513254313.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:13.576Z,1513254313.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:13.823Z,1513254313.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:13.958Z,1513254313.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:14.006Z,1513254314.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:14.360Z,1513254314.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:14.385Z,1513254314.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:14.619Z,1513254314.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:14.761Z,1513254314.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:14.788Z,1513254314.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:15.030Z,1513254315.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:15.168Z,1513254315.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:15.187Z,1513254315.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:15.562Z,1513254315.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:15.583Z,1513254315.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:15.825Z,1513254315.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:15.963Z,1513254315.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:15.983Z,1513254315.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:16.367Z,1513254316.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:16.382Z,1513254316.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:16.623Z,1513254316.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:16.757Z,1513254316.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:16.787Z,1513254316.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:17.033Z,1513254317.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:17.161Z,1513254317.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:17.185Z,1513254317.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:17.592Z,1513254317.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:17.633Z,1513254317.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:17.830Z,1513254317.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:17.955Z,1513254317.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:17.981Z,1513254317.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:18.355Z,1513254318.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:18.383Z,1513254318.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:18.627Z,1513254318.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:18.755Z,1513254318.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:18.786Z,1513254318.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:19.033Z,1513254319.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:19.168Z,1513254319.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:19.183Z,1513254319.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:19.556Z,1513254319.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:19.582Z,1513254319.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:19.829Z,1513254319.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:19.948Z,1513254319.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:19.983Z,1513254319.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:20.355Z,1513254320.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:20.382Z,1513254320.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:20.626Z,1513254320.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:20.823Z,1513254320.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:20.846Z,1513254320.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:21.029Z,1513254321.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:21.155Z,1513254321.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:21.180Z,1513254321.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:21.556Z,1513254321.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:21.583Z,1513254321.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:21.827Z,1513254321.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:21.956Z,1513254321.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:21.987Z,1513254321.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:22.355Z,1513254322.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:22.390Z,1513254322.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:22.621Z,1513254322.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:22.755Z,1513254322.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:22.781Z,1513254322.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:23.025Z,1513254323.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:23.155Z,1513254323.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:23.187Z,1513254323.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:23.559Z,1513254323.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:23.585Z,1513254323.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:23.822Z,1513254323.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:23.955Z,1513254323.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:24.023Z,1513254324.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:24.356Z,1513254324.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:24.371Z,1513254324.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:24.617Z,1513254324.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:24.763Z,1513254324.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:24.823Z,1513254324.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:25.023Z,1513254325.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:25.157Z,1513254325.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:25.172Z,1513254325.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:25.559Z,1513254325.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:25.573Z,1513254325.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:25.817Z,1513254325.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:25.965Z,1513254325.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:25.980Z,1513254325.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:26.369Z,1513254326.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:26.435Z,1513254326.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:26.613Z,1513254326.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:26.758Z,1513254326.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:26.781Z,1513254326.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:27.018Z,1513254327.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:27.189Z,1513254327.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:27.259Z,1513254327.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:27.560Z,1513254327.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:27.579Z,1513254327.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:27.813Z,1513254327.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:27.962Z,1513254327.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:28.017Z,1513254328.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:28.368Z,1513254328.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:28.382Z,1513254328.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:28.612Z,1513254328.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:28.772Z,1513254328.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:28.787Z,1513254328.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:29.021Z,1513254329.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:29.164Z,1513254329.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:29.178Z,1513254329.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:29.567Z,1513254329.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:29.583Z,1513254329.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:29.818Z,1513254329.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:29.968Z,1513254329.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:29.983Z,1513254329.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:30.392Z,1513254330.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:30.434Z,1513254330.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:30.615Z,1513254330.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:30.782Z,1513254330.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:30.796Z,1513254330.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:31.025Z,1513254331.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:31.170Z,1513254331.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:31.185Z,1513254331.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:31.555Z,1513254331.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:31.591Z,1513254331.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:31.821Z,1513254331.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:31.952Z,1513254331.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:31.978Z,1513254331.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:32.354Z,1513254332.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:32.383Z,1513254332.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:32.617Z,1513254332.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:32.754Z,1513254332.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:32.787Z,1513254332.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:33.023Z,1513254333.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:33.155Z,1513254333.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:33.188Z,1513254333.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:33.591Z,1513254333.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:33.630Z,1513254333.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:33.817Z,1513254333.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:33.955Z,1513254333.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:33.972Z,1513254333.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:34.355Z,1513254334.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:34.369Z,1513254334.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:34.613Z,1513254334.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:34.754Z,1513254334.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:34.775Z,1513254334.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:35.018Z,1513254335.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:35.163Z,1513254335.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:35.178Z,1513254335.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:35.563Z,1513254335.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:35.577Z,1513254335.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:35.813Z,1513254335.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:35.972Z,1513254335.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:36.010Z,1513254336.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:36.359Z,1513254336.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:36.408Z,1513254336.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:36.609Z,1513254336.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:36.795Z,1513254336.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:36.835Z,1513254336.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:37.017Z,1513254337.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:37.161Z,1513254337.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:37.176Z,1513254337.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:37.562Z,1513254337.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:37.583Z,1513254337.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:37.813Z,1513254337.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:37.961Z,1513254337.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:37.975Z,1513254337.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:38.364Z,1513254338.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:38.379Z,1513254338.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:38.610Z,1513254338.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:38.760Z,1513254338.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:38.787Z,1513254338.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:39.013Z,1513254339.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:39.164Z,1513254339.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:39.178Z,1513254339.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:39.566Z,1513254339.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:39.581Z,1513254339.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:39.810Z,1513254339.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:39.999Z,1513254339.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:40.027Z,1513254340.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:40.373Z,1513254340.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:40.388Z,1513254340.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:40.608Z,1513254340.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:40.769Z,1513254340.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:40.784Z,1513254340.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:41.013Z,1513254341.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:41.159Z,1513254341.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:41.191Z,1513254341.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:41.562Z,1513254341.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:41.587Z,1513254341.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:41.811Z,1513254341.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:41.962Z,1513254341.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:41.984Z,1513254341.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:42.361Z,1513254342.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:42.403Z,1513254342.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:42.607Z,1513254342.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:42.756Z,1513254342.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:42.847Z,1513254342.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:43.015Z,1513254343.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:43.188Z,1513254343.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:43.212Z,1513254343.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:43.555Z,1513254343.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:43.575Z,1513254343.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:43.810Z,1513254343.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:43.955Z,1513254343.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:43.975Z,1513254343.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:44.358Z,1513254344.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:44.381Z,1513254344.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:44.607Z,1513254344.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:44.774Z,1513254344.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:44.789Z,1513254344.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:45.025Z,1513254345.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:45.171Z,1513254345.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:45.185Z,1513254345.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:45.566Z,1513254345.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:45.581Z,1513254345.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:45.824Z,1513254345.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:45.962Z,1513254345.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:45.976Z,1513254345.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:46.373Z,1513254346.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:46.388Z,1513254346.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:46.617Z,1513254346.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:46.755Z,1513254346.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:46.791Z,1513254346.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:47.021Z,1513254347.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:47.182Z,1513254347.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:47.203Z,1513254347.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:47.555Z,1513254347.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:47.590Z,1513254347.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:47.819Z,1513254347.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:47.955Z,1513254347.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:47.964Z,1513254347.964 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T12:25:47.964Z,1513254347.964 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:25:47.964Z,1513254347.964 [BPC1](ERROR): Data Fault
2017-12-14T12:25:47.984Z,1513254347.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:48.016Z,1513254348.016 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:25:48.355Z,1513254348.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:48.394Z,1513254348.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:48.614Z,1513254348.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:48.754Z,1513254348.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:48.792Z,1513254348.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:49.017Z,1513254349.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:49.155Z,1513254349.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:49.186Z,1513254349.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:49.208Z,1513254349.208 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:25:49.208Z,1513254349.208 [BPC1] No Fault, FailCount= 1
2017-12-14T12:25:49.556Z,1513254349.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:49.631Z,1513254349.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:49.814Z,1513254349.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:49.952Z,1513254349.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:50.012Z,1513254350.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:50.363Z,1513254350.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:50.378Z,1513254350.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:50.610Z,1513254350.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:50.757Z,1513254350.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:50.797Z,1513254350.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:51.014Z,1513254351.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:51.166Z,1513254351.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:51.180Z,1513254351.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:51.565Z,1513254351.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:51.580Z,1513254351.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:51.810Z,1513254351.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:51.964Z,1513254351.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:51.979Z,1513254351.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:52.366Z,1513254352.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:52.382Z,1513254352.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:52.605Z,1513254352.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:52.760Z,1513254352.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:52.781Z,1513254352.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:53.010Z,1513254353.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:53.177Z,1513254353.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:53.208Z,1513254353.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:53.564Z,1513254353.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:53.583Z,1513254353.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:53.805Z,1513254353.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:53.957Z,1513254353.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:53.972Z,1513254353.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:54.365Z,1513254354.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:54.412Z,1513254354.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:54.603Z,1513254354.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:54.760Z,1513254354.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:54.779Z,1513254354.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:55.013Z,1513254355.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:55.164Z,1513254355.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:55.179Z,1513254355.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:55.565Z,1513254355.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:55.579Z,1513254355.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:55.811Z,1513254355.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:55.958Z,1513254355.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:55.973Z,1513254355.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:56.401Z,1513254356.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:56.420Z,1513254356.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:56.607Z,1513254356.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:56.762Z,1513254356.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:56.776Z,1513254356.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:57.033Z,1513254357.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:57.166Z,1513254357.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:57.180Z,1513254357.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:57.567Z,1513254357.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:57.582Z,1513254357.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:57.830Z,1513254357.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:57.965Z,1513254357.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:58.018Z,1513254358.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:58.366Z,1513254358.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:58.382Z,1513254358.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:58.628Z,1513254358.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:58.760Z,1513254358.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:58.779Z,1513254358.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:59.033Z,1513254359.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:59.164Z,1513254359.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:59.183Z,1513254359.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:59.606Z,1513254359.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:59.663Z,1513254359.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:25:59.830Z,1513254359.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:59.968Z,1513254359.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:25:59.983Z,1513254359.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:00.367Z,1513254360.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:00.387Z,1513254360.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:00.625Z,1513254360.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:01.029Z,1513254361.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:01.827Z,1513254361.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:02.621Z,1513254362.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:03.025Z,1513254363.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:03.762Z,1513254363.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:03.777Z,1513254363.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:03.822Z,1513254363.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:03.888Z,1513254363.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:03.921Z,1513254363.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:04.285Z,1513254364.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:04.303Z,1513254364.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:04.618Z,1513254364.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:04.639Z,1513254364.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:04.666Z,1513254364.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:05.023Z,1513254365.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:05.048Z,1513254365.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:05.064Z,1513254365.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:05.441Z,1513254365.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:05.456Z,1513254365.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:05.818Z,1513254365.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:05.836Z,1513254365.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:05.857Z,1513254365.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:06.263Z,1513254366.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:06.333Z,1513254366.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:06.613Z,1513254366.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:06.638Z,1513254366.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:06.678Z,1513254366.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:07.018Z,1513254367.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:07.033Z,1513254367.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:07.068Z,1513254367.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:07.434Z,1513254367.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:07.467Z,1513254367.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:07.814Z,1513254367.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:07.835Z,1513254367.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:07.860Z,1513254367.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:08.235Z,1513254368.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:08.271Z,1513254368.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:08.609Z,1513254368.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:08.648Z,1513254368.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:08.675Z,1513254368.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:09.017Z,1513254369.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:09.062Z,1513254369.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:09.098Z,1513254369.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:09.440Z,1513254369.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:09.455Z,1513254369.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:09.814Z,1513254369.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:09.839Z,1513254369.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:09.895Z,1513254369.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:10.243Z,1513254370.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:10.258Z,1513254370.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:10.611Z,1513254370.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:10.666Z,1513254370.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:10.707Z,1513254370.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:11.031Z,1513254371.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:11.045Z,1513254371.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:11.066Z,1513254371.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:11.431Z,1513254371.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:11.466Z,1513254371.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:11.829Z,1513254371.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:11.850Z,1513254371.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:11.865Z,1513254371.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:12.259Z,1513254372.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:12.299Z,1513254372.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:12.646Z,1513254372.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:12.683Z,1513254372.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:12.706Z,1513254372.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:13.046Z,1513254373.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:13.049Z,1513254373.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:13.055Z,1513254373.055 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:26:13.056Z,1513254373.056 [BPC1] Communications Fault, FailCount= 2
2017-12-14T12:26:13.056Z,1513254373.056 [BPC1](ERROR): Communications Fault
2017-12-14T12:26:13.063Z,1513254373.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:13.107Z,1513254373.107 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:26:13.437Z,1513254373.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:13.467Z,1513254373.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:13.839Z,1513254373.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:13.846Z,1513254373.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:13.855Z,1513254373.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:14.269Z,1513254374.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:14.349Z,1513254374.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:14.395Z,1513254374.395 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:26:14.395Z,1513254374.395 [BPC1] No Fault, FailCount= 2
2017-12-14T12:26:14.635Z,1513254374.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:14.642Z,1513254374.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:14.731Z,1513254374.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:15.035Z,1513254375.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:15.045Z,1513254375.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:15.065Z,1513254375.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:15.457Z,1513254375.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:15.492Z,1513254375.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:15.833Z,1513254375.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:15.842Z,1513254375.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:15.865Z,1513254375.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:16.284Z,1513254376.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:16.335Z,1513254376.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:16.639Z,1513254376.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:16.647Z,1513254376.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:16.698Z,1513254376.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:17.035Z,1513254377.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:17.041Z,1513254377.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:17.051Z,1513254377.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:17.437Z,1513254377.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:17.494Z,1513254377.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:17.838Z,1513254377.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:17.840Z,1513254377.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:17.887Z,1513254377.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:18.302Z,1513254378.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:18.385Z,1513254378.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:18.634Z,1513254378.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:18.664Z,1513254378.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:18.724Z,1513254378.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:19.036Z,1513254379.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:19.037Z,1513254379.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:19.051Z,1513254379.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:19.432Z,1513254379.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:19.456Z,1513254379.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:19.832Z,1513254379.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:19.834Z,1513254379.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:19.865Z,1513254379.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:20.282Z,1513254380.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:20.325Z,1513254380.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:20.629Z,1513254380.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:20.632Z,1513254380.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:20.651Z,1513254380.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:21.034Z,1513254381.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:21.051Z,1513254381.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:21.099Z,1513254381.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:21.434Z,1513254381.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:21.492Z,1513254381.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:21.830Z,1513254381.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:21.830Z,1513254381.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:21.879Z,1513254381.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:22.255Z,1513254382.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:22.364Z,1513254382.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:22.633Z,1513254382.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:22.648Z,1513254382.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:22.680Z,1513254382.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:23.037Z,1513254383.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:23.046Z,1513254383.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:23.112Z,1513254383.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:23.459Z,1513254383.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:23.512Z,1513254383.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:23.828Z,1513254383.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:23.834Z,1513254383.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:23.873Z,1513254383.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:24.233Z,1513254384.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:24.258Z,1513254384.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:24.630Z,1513254384.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:24.667Z,1513254384.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:24.723Z,1513254384.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:25.033Z,1513254385.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:25.077Z,1513254385.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:25.104Z,1513254385.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:25.427Z,1513254385.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:25.458Z,1513254385.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:25.831Z,1513254385.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:25.832Z,1513254385.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:25.869Z,1513254385.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:26.246Z,1513254386.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:26.281Z,1513254386.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:26.626Z,1513254386.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:26.649Z,1513254386.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:26.693Z,1513254386.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:27.030Z,1513254387.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:27.067Z,1513254387.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:27.085Z,1513254387.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:27.442Z,1513254387.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:27.456Z,1513254387.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:27.826Z,1513254387.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:27.857Z,1513254387.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:27.889Z,1513254387.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:28.251Z,1513254388.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:28.367Z,1513254388.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:28.621Z,1513254388.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:28.645Z,1513254388.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:28.684Z,1513254388.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:29.027Z,1513254389.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:29.048Z,1513254389.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:29.099Z,1513254389.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:29.460Z,1513254389.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:29.515Z,1513254389.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:29.822Z,1513254389.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:29.842Z,1513254389.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:29.894Z,1513254389.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:30.266Z,1513254390.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:30.311Z,1513254390.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:30.617Z,1513254390.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:30.649Z,1513254390.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:30.693Z,1513254390.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:31.021Z,1513254391.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:31.045Z,1513254391.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:31.106Z,1513254391.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:31.436Z,1513254391.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:31.480Z,1513254391.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:31.818Z,1513254391.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:31.829Z,1513254391.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:31.883Z,1513254391.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:32.286Z,1513254392.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:32.331Z,1513254392.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:32.621Z,1513254392.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:32.654Z,1513254392.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:32.693Z,1513254392.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:33.026Z,1513254393.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:33.042Z,1513254393.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:33.071Z,1513254393.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:33.428Z,1513254393.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:33.531Z,1513254393.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:33.824Z,1513254393.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:33.840Z,1513254393.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:33.884Z,1513254393.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:34.261Z,1513254394.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:34.350Z,1513254394.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:34.617Z,1513254394.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:34.640Z,1513254394.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:34.680Z,1513254394.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:35.037Z,1513254395.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:35.115Z,1513254395.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:35.218Z,1513254395.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:35.444Z,1513254395.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:35.486Z,1513254395.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:35.841Z,1513254395.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:35.910Z,1513254395.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:36.014Z,1513254396.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:36.238Z,1513254396.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:36.262Z,1513254396.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:36.660Z,1513254396.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:36.684Z,1513254396.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:36.754Z,1513254396.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:37.044Z,1513254397.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:37.094Z,1513254397.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:37.443Z,1513254397.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:37.466Z,1513254397.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:37.550Z,1513254397.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:37.839Z,1513254397.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:37.893Z,1513254397.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:38.228Z,1513254398.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:38.346Z,1513254398.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:38.373Z,1513254398.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:38.671Z,1513254398.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:38.700Z,1513254398.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:39.044Z,1513254399.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:39.046Z,1513254399.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:39.064Z,1513254399.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:39.440Z,1513254399.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:39.467Z,1513254399.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:39.836Z,1513254399.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:39.842Z,1513254399.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:39.864Z,1513254399.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:40.242Z,1513254400.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:40.261Z,1513254400.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:40.637Z,1513254400.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:40.650Z,1513254400.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:40.691Z,1513254400.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:41.029Z,1513254401.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:41.069Z,1513254401.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:41.074Z,1513254401.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:41.442Z,1513254401.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:41.529Z,1513254401.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:41.833Z,1513254401.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:41.882Z,1513254401.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:41.883Z,1513254401.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:42.302Z,1513254402.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:42.356Z,1513254402.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:42.641Z,1513254402.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:42.668Z,1513254402.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:42.678Z,1513254402.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:42.694Z,1513254402.694 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:26:42.694Z,1513254402.694 [NAL9602] No Fault, FailCount= 5
2017-12-14T12:26:43.010Z,1513254403.010 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:26:43.029Z,1513254403.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:43.081Z,1513254403.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:43.087Z,1513254403.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:43.432Z,1513254403.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:43.479Z,1513254403.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:43.830Z,1513254403.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:43.866Z,1513254403.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:43.878Z,1513254403.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:44.280Z,1513254404.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:44.322Z,1513254404.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x33803 got:0x16384
2017-12-14T12:26:44.372Z,1513254404.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:44.631Z,1513254404.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:44.674Z,1513254404.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:44.679Z,1513254404.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:45.044Z,1513254405.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:45.071Z,1513254405.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:45.081Z,1513254405.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:45.442Z,1513254405.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:45.494Z,1513254405.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:45.843Z,1513254405.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:45.871Z,1513254405.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:45.886Z,1513254405.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:46.266Z,1513254406.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:46.357Z,1513254406.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:46.643Z,1513254406.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:46.682Z,1513254406.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:46.695Z,1513254406.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:47.035Z,1513254407.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:47.075Z,1513254407.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:47.085Z,1513254407.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:47.427Z,1513254407.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:47.463Z,1513254407.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:47.835Z,1513254407.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:47.870Z,1513254407.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:47.881Z,1513254407.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:48.290Z,1513254408.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:48.325Z,1513254408.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:48.632Z,1513254408.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:48.660Z,1513254408.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:48.677Z,1513254408.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:49.044Z,1513254409.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:49.063Z,1513254409.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:49.113Z,1513254409.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:49.423Z,1513254409.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:49.446Z,1513254409.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:49.848Z,1513254409.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:49.864Z,1513254409.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:49.911Z,1513254409.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:50.234Z,1513254410.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:50.263Z,1513254410.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:50.633Z,1513254410.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:50.649Z,1513254410.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:50.705Z,1513254410.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:51.039Z,1513254411.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:51.098Z,1513254411.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:51.109Z,1513254411.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:51.443Z,1513254411.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:51.463Z,1513254411.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:51.845Z,1513254411.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:51.860Z,1513254411.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:51.906Z,1513254411.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:52.241Z,1513254412.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:52.256Z,1513254412.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:52.669Z,1513254412.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:52.701Z,1513254412.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:52.710Z,1513254412.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:53.039Z,1513254413.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:53.059Z,1513254413.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:53.105Z,1513254413.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:53.441Z,1513254413.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:53.457Z,1513254413.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:53.846Z,1513254413.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:53.862Z,1513254413.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:53.902Z,1513254413.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:54.214Z,1513254414.214 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:26:54.269Z,1513254414.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:54.301Z,1513254414.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:54.662Z,1513254414.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:54.696Z,1513254414.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:54.697Z,1513254414.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:55.050Z,1513254415.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:55.101Z,1513254415.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:55.115Z,1513254415.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:55.452Z,1513254415.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:55.468Z,1513254415.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:55.850Z,1513254415.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:55.865Z,1513254415.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:55.898Z,1513254415.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:56.291Z,1513254416.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:56.364Z,1513254416.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:56.638Z,1513254416.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:56.662Z,1513254416.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:56.694Z,1513254416.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:57.037Z,1513254417.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:57.052Z,1513254417.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:57.097Z,1513254417.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:57.485Z,1513254417.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:57.535Z,1513254417.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:57.843Z,1513254417.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:57.858Z,1513254417.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:57.894Z,1513254417.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:58.295Z,1513254418.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:58.348Z,1513254418.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:58.628Z,1513254418.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:58.659Z,1513254418.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:58.690Z,1513254418.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:59.035Z,1513254419.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:59.065Z,1513254419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:59.093Z,1513254419.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:59.438Z,1513254419.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:59.468Z,1513254419.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:59.836Z,1513254419.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:26:59.867Z,1513254419.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:26:59.890Z,1513254419.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:00.285Z,1513254420.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:00.344Z,1513254420.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:00.672Z,1513254420.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:00.686Z,1513254420.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:00.703Z,1513254420.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:01.089Z,1513254421.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:01.885Z,1513254421.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:02.669Z,1513254422.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:03.465Z,1513254423.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.098Z,1513254424.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.113Z,1513254424.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:04.247Z,1513254424.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.261Z,1513254424.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.324Z,1513254424.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:04.580Z,1513254424.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.625Z,1513254424.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:04.737Z,1513254424.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:04.998Z,1513254424.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:05.020Z,1513254425.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:05.377Z,1513254425.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:05.415Z,1513254425.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:05.536Z,1513254425.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:05.780Z,1513254425.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:05.805Z,1513254425.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:06.196Z,1513254426.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:06.213Z,1513254426.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:06.330Z,1513254426.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:06.659Z,1513254426.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:06.715Z,1513254426.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:07.031Z,1513254427.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:07.034Z,1513254427.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:07.060Z,1513254427.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:07.390Z,1513254427.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:07.434Z,1513254427.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:07.784Z,1513254427.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:07.822Z,1513254427.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:07.829Z,1513254427.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:08.185Z,1513254428.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:08.255Z,1513254428.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:08.626Z,1513254428.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:08.667Z,1513254428.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:08.682Z,1513254428.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:08.976Z,1513254428.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:09.008Z,1513254429.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:09.042Z,1513254429.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:09.403Z,1513254429.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:09.426Z,1513254429.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:09.811Z,1513254429.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:09.825Z,1513254429.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:09.842Z,1513254429.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:10.206Z,1513254430.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:10.310Z,1513254430.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:10.588Z,1513254430.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:10.624Z,1513254430.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:10.637Z,1513254430.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:10.992Z,1513254430.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:11.007Z,1513254431.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:11.041Z,1513254431.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:11.376Z,1513254431.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:11.410Z,1513254431.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:11.804Z,1513254431.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:11.819Z,1513254431.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:11.838Z,1513254431.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:12.180Z,1513254432.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:12.284Z,1513254432.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:12.594Z,1513254432.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:12.621Z,1513254432.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:12.634Z,1513254432.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:13.005Z,1513254433.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:13.024Z,1513254433.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:13.037Z,1513254433.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:13.413Z,1513254433.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:13.428Z,1513254433.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:13.779Z,1513254433.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:13.811Z,1513254433.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:13.834Z,1513254433.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:14.180Z,1513254434.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:14.287Z,1513254434.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:14.580Z,1513254434.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:14.596Z,1513254434.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:14.630Z,1513254434.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:14.983Z,1513254434.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:15.024Z,1513254435.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:15.033Z,1513254435.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:15.443Z,1513254435.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:15.468Z,1513254435.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:15.814Z,1513254435.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:15.830Z,1513254435.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:15.834Z,1513254435.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:16.194Z,1513254436.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:16.304Z,1513254436.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:16.587Z,1513254436.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:16.625Z,1513254436.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:16.628Z,1513254436.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:16.990Z,1513254436.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:17.030Z,1513254437.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:17.031Z,1513254437.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:17.395Z,1513254437.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:17.466Z,1513254437.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:17.790Z,1513254437.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:17.826Z,1513254437.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:17.833Z,1513254437.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:18.191Z,1513254438.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:18.211Z,1513254438.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:18.607Z,1513254438.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:18.623Z,1513254438.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:18.652Z,1513254438.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:19.006Z,1513254439.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:19.049Z,1513254439.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:19.071Z,1513254439.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:19.408Z,1513254439.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:19.423Z,1513254439.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:19.824Z,1513254439.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:19.846Z,1513254439.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:19.860Z,1513254439.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:20.179Z,1513254440.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:20.253Z,1513254440.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:20.642Z,1513254440.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:20.660Z,1513254440.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:20.691Z,1513254440.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:20.986Z,1513254440.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:21.045Z,1513254441.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:21.052Z,1513254441.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:21.402Z,1513254441.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:21.425Z,1513254441.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:21.801Z,1513254441.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:21.833Z,1513254441.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:21.842Z,1513254441.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:22.186Z,1513254442.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:22.201Z,1513254442.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:22.638Z,1513254442.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:22.647Z,1513254442.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:22.693Z,1513254442.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:22.000Z,1513254443.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:23.041Z,1513254443.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:23.043Z,1513254443.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:23.384Z,1513254443.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:23.430Z,1513254443.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:23.779Z,1513254443.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:23.822Z,1513254443.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:23.838Z,1513254443.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:24.192Z,1513254444.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:24.214Z,1513254444.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:24.611Z,1513254444.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:24.632Z,1513254444.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:24.634Z,1513254444.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:25.001Z,1513254445.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:25.037Z,1513254445.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:25.039Z,1513254445.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:25.404Z,1513254445.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:25.431Z,1513254445.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:25.784Z,1513254445.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:25.816Z,1513254445.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:25.834Z,1513254445.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:26.260Z,1513254446.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:26.346Z,1513254446.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:26.580Z,1513254446.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:26.616Z,1513254446.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:26.630Z,1513254446.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:26.979Z,1513254446.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:27.022Z,1513254447.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:27.033Z,1513254447.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:27.408Z,1513254447.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:27.424Z,1513254447.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:27.814Z,1513254447.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:27.828Z,1513254447.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:27.830Z,1513254447.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:28.198Z,1513254448.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:28.289Z,1513254448.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:28.583Z,1513254448.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:28.625Z,1513254448.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:28.628Z,1513254448.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:28.987Z,1513254448.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:29.029Z,1513254449.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:29.032Z,1513254449.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:29.381Z,1513254449.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:29.438Z,1513254449.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:29.791Z,1513254449.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:29.806Z,1513254449.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:29.806Z,1513254449.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 238
2017-12-14T12:27:29.806Z,1513254449.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:27:29.808Z,1513254449.808 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:29.808Z,1513254449.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 238
2017-12-14T12:27:29.808Z,1513254449.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:27:29.827Z,1513254449.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:29.846Z,1513254449.846 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:29.846Z,1513254449.846 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 238
2017-12-14T12:27:29.846Z,1513254449.846 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:27:29.884Z,1513254449.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:27:29.884Z,1513254449.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:27:29.884Z,1513254449.884 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:27:30.188Z,1513254450.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:30.257Z,1513254450.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:27:30.258Z,1513254450.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 238
2017-12-14T12:27:30.260Z,1513254450.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:27:30.260Z,1513254450.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 238
2017-12-14T12:27:30.279Z,1513254450.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:27:30.280Z,1513254450.280 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 238
2017-12-14T12:27:30.596Z,1513254450.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:30.619Z,1513254450.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:27:30.619Z,1513254450.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:27:30.620Z,1513254450.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:27:30.620Z,1513254450.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:27:30.620Z,1513254450.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:27:30.622Z,1513254450.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:30.623Z,1513254450.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:27:30.624Z,1513254450.624 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:27:30.624Z,1513254450.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:27:30.638Z,1513254450.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:27:31.006Z,1513254451.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:31.025Z,1513254451.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:31.028Z,1513254451.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:31.402Z,1513254451.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:31.448Z,1513254451.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:31.773Z,1513254451.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:31.804Z,1513254451.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:31.822Z,1513254451.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:32.182Z,1513254452.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:32.215Z,1513254452.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:32.580Z,1513254452.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:32.618Z,1513254452.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:32.663Z,1513254452.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:32.987Z,1513254452.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:33.007Z,1513254453.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:33.023Z,1513254453.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:33.396Z,1513254453.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:33.417Z,1513254453.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:33.797Z,1513254453.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:33.818Z,1513254453.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:33.820Z,1513254453.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:34.200Z,1513254454.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:34.215Z,1513254454.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:34.615Z,1513254454.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:34.710Z,1513254454.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:34.751Z,1513254454.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:34.983Z,1513254454.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:35.027Z,1513254455.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:35.065Z,1513254455.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:35.383Z,1513254455.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:35.414Z,1513254455.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:35.780Z,1513254455.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:35.856Z,1513254455.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:35.861Z,1513254455.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:36.188Z,1513254456.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:36.238Z,1513254456.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:36.651Z,1513254456.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:36.658Z,1513254456.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:36.679Z,1513254456.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:37.008Z,1513254457.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:37.024Z,1513254457.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:37.061Z,1513254457.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:37.409Z,1513254457.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:37.424Z,1513254457.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:37.783Z,1513254457.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:37.845Z,1513254457.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:37.858Z,1513254457.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:38.176Z,1513254458.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:38.207Z,1513254458.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:38.581Z,1513254458.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:38.615Z,1513254458.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:38.653Z,1513254458.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:39.004Z,1513254459.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:39.028Z,1513254459.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:39.058Z,1513254459.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:39.403Z,1513254459.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:39.433Z,1513254459.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:39.802Z,1513254459.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:39.825Z,1513254459.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:39.854Z,1513254459.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:40.188Z,1513254460.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:40.289Z,1513254460.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:40.591Z,1513254460.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:40.631Z,1513254460.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:40.649Z,1513254460.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:40.991Z,1513254460.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:41.038Z,1513254461.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:41.053Z,1513254461.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:41.388Z,1513254461.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:41.447Z,1513254461.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:41.786Z,1513254461.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:41.808Z,1513254461.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:41.850Z,1513254461.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:42.214Z,1513254462.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:42.314Z,1513254462.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:42.597Z,1513254462.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:42.645Z,1513254462.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:42.658Z,1513254462.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:43.003Z,1513254463.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:43.024Z,1513254463.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:43.049Z,1513254463.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:43.407Z,1513254463.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:43.459Z,1513254463.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:43.784Z,1513254463.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:43.823Z,1513254463.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:43.846Z,1513254463.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:44.176Z,1513254464.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:44.208Z,1513254464.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:44.580Z,1513254464.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:44.607Z,1513254464.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:44.642Z,1513254464.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:44.979Z,1513254464.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:45.015Z,1513254465.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:45.045Z,1513254465.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:45.398Z,1513254465.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:45.433Z,1513254465.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:45.805Z,1513254465.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:45.841Z,1513254465.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:45.848Z,1513254465.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:46.194Z,1513254466.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:46.241Z,1513254466.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:46.577Z,1513254466.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:46.616Z,1513254466.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:46.661Z,1513254466.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:46.979Z,1513254466.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:47.017Z,1513254467.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:47.065Z,1513254467.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:47.379Z,1513254467.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:47.411Z,1513254467.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:47.783Z,1513254467.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:47.812Z,1513254467.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:47.862Z,1513254467.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:48.179Z,1513254468.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:48.212Z,1513254468.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:48.658Z,1513254468.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:48.665Z,1513254468.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:48.727Z,1513254468.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:48.994Z,1513254468.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:49.041Z,1513254469.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:49.061Z,1513254469.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:49.390Z,1513254469.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:49.422Z,1513254469.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:49.779Z,1513254469.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:49.815Z,1513254469.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:49.858Z,1513254469.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:50.179Z,1513254470.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:50.209Z,1513254470.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:50.654Z,1513254470.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:50.666Z,1513254470.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:50.700Z,1513254470.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:51.001Z,1513254471.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:51.035Z,1513254471.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:51.057Z,1513254471.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:51.409Z,1513254471.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:51.424Z,1513254471.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:51.803Z,1513254471.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:51.853Z,1513254471.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:51.860Z,1513254471.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:52.197Z,1513254472.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:52.284Z,1513254472.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:52.584Z,1513254472.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:52.607Z,1513254472.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:52.649Z,1513254472.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:52.991Z,1513254472.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:53.014Z,1513254473.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:53.053Z,1513254473.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:53.391Z,1513254473.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:53.412Z,1513254473.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:53.792Z,1513254473.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:53.839Z,1513254473.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:53.850Z,1513254473.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:54.191Z,1513254474.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:54.206Z,1513254474.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:54.594Z,1513254474.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:54.630Z,1513254474.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:54.645Z,1513254474.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:55.014Z,1513254475.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:55.049Z,1513254475.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:55.061Z,1513254475.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:55.398Z,1513254475.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:55.439Z,1513254475.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:55.788Z,1513254475.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:55.829Z,1513254475.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:55.846Z,1513254475.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:56.184Z,1513254476.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:56.247Z,1513254476.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:56.595Z,1513254476.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:56.614Z,1513254476.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:56.641Z,1513254476.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:56.988Z,1513254476.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:57.043Z,1513254477.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:57.045Z,1513254477.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:57.398Z,1513254477.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:57.423Z,1513254477.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:57.798Z,1513254477.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:57.820Z,1513254477.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:57.841Z,1513254477.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:58.283Z,1513254478.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:58.361Z,1513254478.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:58.583Z,1513254478.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:58.621Z,1513254478.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:58.638Z,1513254478.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:58.980Z,1513254478.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:59.005Z,1513254479.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:59.041Z,1513254479.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:59.379Z,1513254479.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:59.418Z,1513254479.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:59.780Z,1513254479.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:27:59.822Z,1513254479.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:27:59.838Z,1513254479.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:00.184Z,1513254480.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:00.211Z,1513254480.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:00.598Z,1513254480.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:00.634Z,1513254480.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:00.637Z,1513254480.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:01.004Z,1513254481.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:01.032Z,1513254481.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:01.037Z,1513254481.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:01.834Z,1513254481.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:02.630Z,1513254482.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:03.033Z,1513254483.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:03.830Z,1513254483.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:04.522Z,1513254484.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:04.626Z,1513254484.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:04.670Z,1513254484.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:04.781Z,1513254484.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:04.820Z,1513254484.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:05.030Z,1513254485.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:05.178Z,1513254485.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:05.230Z,1513254485.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:05.572Z,1513254485.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:05.588Z,1513254485.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:05.826Z,1513254485.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:05.967Z,1513254485.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:06.019Z,1513254486.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:06.374Z,1513254486.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:06.389Z,1513254486.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:06.623Z,1513254486.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:06.773Z,1513254486.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:06.789Z,1513254486.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:07.033Z,1513254487.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:07.174Z,1513254487.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:07.188Z,1513254487.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:07.568Z,1513254487.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:07.588Z,1513254487.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:07.830Z,1513254487.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:07.976Z,1513254487.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:07.996Z,1513254487.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:08.359Z,1513254488.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:08.396Z,1513254488.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:08.625Z,1513254488.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:08.782Z,1513254488.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:08.796Z,1513254488.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:09.029Z,1513254489.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:09.173Z,1513254489.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:09.188Z,1513254489.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:09.583Z,1513254489.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:09.603Z,1513254489.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:09.827Z,1513254489.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:09.985Z,1513254489.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:09.999Z,1513254489.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:10.379Z,1513254490.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:10.394Z,1513254490.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:10.621Z,1513254490.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:10.759Z,1513254490.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:10.792Z,1513254490.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:11.025Z,1513254491.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:11.204Z,1513254491.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:11.240Z,1513254491.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:11.560Z,1513254491.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:11.587Z,1513254491.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:11.822Z,1513254491.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:11.960Z,1513254491.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:11.986Z,1513254491.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:12.385Z,1513254492.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:12.400Z,1513254492.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:12.617Z,1513254492.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:12.779Z,1513254492.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:12.806Z,1513254492.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:13.023Z,1513254493.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:13.178Z,1513254493.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:13.194Z,1513254493.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:13.561Z,1513254493.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:13.592Z,1513254493.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:13.818Z,1513254493.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:13.964Z,1513254493.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:14.016Z,1513254494.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:14.412Z,1513254494.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:14.480Z,1513254494.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:14.613Z,1513254494.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:14.776Z,1513254494.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:14.799Z,1513254494.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:15.018Z,1513254495.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:15.165Z,1513254495.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:15.197Z,1513254495.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:15.569Z,1513254495.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:15.584Z,1513254495.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:15.813Z,1513254495.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:15.978Z,1513254495.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:16.005Z,1513254496.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:16.381Z,1513254496.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:16.403Z,1513254496.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:16.612Z,1513254496.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:16.768Z,1513254496.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:16.783Z,1513254496.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:17.021Z,1513254497.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:17.171Z,1513254497.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:17.207Z,1513254497.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:17.573Z,1513254497.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:17.621Z,1513254497.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:17.818Z,1513254497.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:17.970Z,1513254497.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:17.985Z,1513254497.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:18.368Z,1513254498.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:18.383Z,1513254498.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:18.615Z,1513254498.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:18.786Z,1513254498.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:18.808Z,1513254498.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:19.026Z,1513254499.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:19.182Z,1513254499.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:19.212Z,1513254499.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:19.570Z,1513254499.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:19.586Z,1513254499.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:19.821Z,1513254499.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:20.017Z,1513254500.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:20.032Z,1513254500.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:20.375Z,1513254500.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:20.391Z,1513254500.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:20.617Z,1513254500.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:20.803Z,1513254500.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:20.822Z,1513254500.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:21.022Z,1513254501.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:21.166Z,1513254501.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:21.187Z,1513254501.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:21.577Z,1513254501.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:21.592Z,1513254501.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:21.818Z,1513254501.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:21.985Z,1513254501.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:21.000Z,1513254502.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:22.390Z,1513254502.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:22.428Z,1513254502.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:22.613Z,1513254502.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:22.773Z,1513254502.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:22.789Z,1513254502.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:23.018Z,1513254503.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:23.169Z,1513254503.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:23.185Z,1513254503.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:23.564Z,1513254503.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:23.587Z,1513254503.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:23.814Z,1513254503.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:23.983Z,1513254503.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:24.028Z,1513254504.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:24.388Z,1513254504.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:24.407Z,1513254504.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:24.611Z,1513254504.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:24.783Z,1513254504.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:24.807Z,1513254504.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:25.017Z,1513254505.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:25.185Z,1513254505.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:25.207Z,1513254505.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:25.573Z,1513254505.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:25.635Z,1513254505.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:25.814Z,1513254505.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:25.987Z,1513254505.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:26.005Z,1513254506.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:26.359Z,1513254506.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:26.411Z,1513254506.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:26.609Z,1513254506.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:26.767Z,1513254506.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:26.803Z,1513254506.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:27.013Z,1513254507.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:27.205Z,1513254507.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:27.259Z,1513254507.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:27.569Z,1513254507.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:27.604Z,1513254507.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:27.811Z,1513254507.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:27.969Z,1513254507.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:28.019Z,1513254508.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:28.388Z,1513254508.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:28.403Z,1513254508.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:28.605Z,1513254508.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:28.759Z,1513254508.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:28.795Z,1513254508.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:29.009Z,1513254509.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:29.164Z,1513254509.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:29.179Z,1513254509.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:29.564Z,1513254509.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:29.580Z,1513254509.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:29.807Z,1513254509.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:29.963Z,1513254509.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:29.978Z,1513254509.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:30.379Z,1513254510.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:30.413Z,1513254510.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:30.603Z,1513254510.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:30.782Z,1513254510.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:30.812Z,1513254510.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:31.015Z,1513254511.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:31.182Z,1513254511.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:31.212Z,1513254511.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:31.570Z,1513254511.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:31.584Z,1513254511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:31.810Z,1513254511.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:31.963Z,1513254511.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:31.991Z,1513254511.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:32.371Z,1513254512.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:32.386Z,1513254512.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:32.616Z,1513254512.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:32.778Z,1513254512.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:32.793Z,1513254512.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:33.025Z,1513254513.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:33.169Z,1513254513.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:33.184Z,1513254513.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:33.625Z,1513254513.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:33.683Z,1513254513.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:33.823Z,1513254513.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:33.977Z,1513254513.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:33.993Z,1513254513.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:34.376Z,1513254514.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:34.400Z,1513254514.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:34.617Z,1513254514.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:34.762Z,1513254514.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:34.785Z,1513254514.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:35.021Z,1513254515.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:35.170Z,1513254515.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:35.184Z,1513254515.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:35.571Z,1513254515.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:35.586Z,1513254515.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:35.819Z,1513254515.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:35.966Z,1513254515.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:35.987Z,1513254515.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:36.382Z,1513254516.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:36.432Z,1513254516.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:36.613Z,1513254516.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:36.801Z,1513254516.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:36.835Z,1513254516.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:37.017Z,1513254517.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:37.179Z,1513254517.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:37.194Z,1513254517.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:37.582Z,1513254517.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:37.596Z,1513254517.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:37.816Z,1513254517.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:37.974Z,1513254517.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:37.992Z,1513254517.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:38.359Z,1513254518.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:38.395Z,1513254518.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:38.609Z,1513254518.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:38.780Z,1513254518.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:38.795Z,1513254518.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:39.014Z,1513254519.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:39.159Z,1513254519.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:39.196Z,1513254519.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:39.583Z,1513254519.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:39.598Z,1513254519.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:39.810Z,1513254519.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:40.036Z,1513254520.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:40.084Z,1513254520.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:40.385Z,1513254520.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:40.407Z,1513254520.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:40.605Z,1513254520.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:40.759Z,1513254520.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:40.791Z,1513254520.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:41.010Z,1513254521.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:41.175Z,1513254521.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:41.207Z,1513254521.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:41.576Z,1513254521.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:41.591Z,1513254521.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:41.806Z,1513254521.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:41.960Z,1513254521.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:41.999Z,1513254521.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:42.388Z,1513254522.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:42.411Z,1513254522.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:42.603Z,1513254522.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:42.783Z,1513254522.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:42.799Z,1513254522.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:43.013Z,1513254523.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:43.196Z,1513254523.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:43.237Z,1513254523.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:43.571Z,1513254523.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:43.598Z,1513254523.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:43.811Z,1513254523.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:43.964Z,1513254523.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:43.999Z,1513254523.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:44.365Z,1513254524.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:44.380Z,1513254524.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:44.607Z,1513254524.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:44.770Z,1513254524.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:44.810Z,1513254524.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:45.017Z,1513254525.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:45.168Z,1513254525.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:45.183Z,1513254525.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:45.577Z,1513254525.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:45.613Z,1513254525.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:45.814Z,1513254525.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:45.976Z,1513254525.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:46.011Z,1513254526.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:46.402Z,1513254526.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:46.426Z,1513254526.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:46.611Z,1513254526.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:46.767Z,1513254526.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:46.783Z,1513254526.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:47.021Z,1513254527.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:47.169Z,1513254527.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:47.183Z,1513254527.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:47.566Z,1513254527.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:47.593Z,1513254527.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:47.818Z,1513254527.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:47.996Z,1513254527.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:48.018Z,1513254528.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:48.374Z,1513254528.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:48.437Z,1513254528.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:48.615Z,1513254528.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:48.774Z,1513254528.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:48.795Z,1513254528.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:49.021Z,1513254529.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:49.178Z,1513254529.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:49.239Z,1513254529.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:49.610Z,1513254529.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:49.674Z,1513254529.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:49.817Z,1513254529.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:49.973Z,1513254529.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:50.023Z,1513254530.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:50.368Z,1513254530.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:50.383Z,1513254530.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:50.613Z,1513254530.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:50.770Z,1513254530.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:50.793Z,1513254530.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:51.017Z,1513254531.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:51.170Z,1513254531.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:51.184Z,1513254531.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:51.590Z,1513254531.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:51.623Z,1513254531.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:51.815Z,1513254531.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:51.977Z,1513254531.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:51.992Z,1513254531.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:52.377Z,1513254532.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:52.391Z,1513254532.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:52.609Z,1513254532.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:52.799Z,1513254532.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:52.827Z,1513254532.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:53.013Z,1513254533.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:53.166Z,1513254533.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:53.193Z,1513254533.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:53.565Z,1513254533.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:53.615Z,1513254533.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:53.810Z,1513254533.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:53.960Z,1513254533.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:53.995Z,1513254533.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:54.369Z,1513254534.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:54.400Z,1513254534.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:54.605Z,1513254534.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:54.781Z,1513254534.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:54.802Z,1513254534.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:55.012Z,1513254535.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:55.170Z,1513254535.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:55.196Z,1513254535.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:55.564Z,1513254535.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:55.596Z,1513254535.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:55.806Z,1513254535.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:55.985Z,1513254535.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:56.024Z,1513254536.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:56.369Z,1513254536.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:56.412Z,1513254536.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:56.601Z,1513254536.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:56.768Z,1513254536.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:56.796Z,1513254536.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:57.006Z,1513254537.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:57.170Z,1513254537.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:57.191Z,1513254537.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:57.582Z,1513254537.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:57.617Z,1513254537.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:57.803Z,1513254537.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:57.974Z,1513254537.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:57.989Z,1513254537.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:58.374Z,1513254538.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:58.426Z,1513254538.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:58.609Z,1513254538.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:58.775Z,1513254538.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:58.790Z,1513254538.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:59.017Z,1513254539.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:59.199Z,1513254539.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:59.256Z,1513254539.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:59.570Z,1513254539.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:59.585Z,1513254539.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:28:59.589Z,1513254539.589 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:23:59.6Z
2017-12-14T12:28:59.589Z,1513254539.589 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T12:28:59.589Z,1513254539.589 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T12:28:59.816Z,1513254539.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:59.964Z,1513254539.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:28:59.994Z,1513254539.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:00.615Z,1513254540.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:00.837Z,1513254540.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:00.852Z,1513254540.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:00.980Z,1513254540.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:01.027Z,1513254541.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:01.035Z,1513254541.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:01.822Z,1513254541.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:02.617Z,1513254542.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:03.025Z,1513254543.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:03.822Z,1513254543.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:04.412Z,1513254544.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:04.427Z,1513254544.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:04.517Z,1513254544.517 [DataOverHttps](INFO): Sending 86 bytes from file Logs/20171214T002839/Courier0276.lzma
2017-12-14T12:29:04.540Z,1513254544.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:04.587Z,1513254544.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:04.619Z,1513254544.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:04.903Z,1513254544.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:04.924Z,1513254544.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:05.021Z,1513254545.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:05.276Z,1513254545.276 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0276.lzma.bak
2017-12-14T12:29:05.276Z,1513254545.276 [DataOverHttps](INFO): SBD MOMSN=5438723
2017-12-14T12:29:05.311Z,1513254545.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:05.339Z,1513254545.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:05.819Z,1513254545.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:06.613Z,1513254546.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:06.655Z,1513254546.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:06.670Z,1513254546.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:06.768Z,1513254546.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:06.811Z,1513254546.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:07.017Z,1513254547.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:10.157Z,1513254550.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:10.173Z,1513254550.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:10.307Z,1513254550.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:10.459Z,1513254550.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:10.651Z,1513254550.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:10.703Z,1513254550.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:11.043Z,1513254551.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:11.059Z,1513254551.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:11.424Z,1513254551.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:11.491Z,1513254551.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:11.826Z,1513254551.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:11.863Z,1513254551.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:15.575Z,1513254555.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:15.615Z,1513254555.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:15.690Z,1513254555.690 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0277.lzma
2017-12-14T12:29:15.723Z,1513254555.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:15.770Z,1513254555.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:15.819Z,1513254555.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:16.107Z,1513254556.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:16.122Z,1513254556.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:16.444Z,1513254556.444 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0277.lzma.bak
2017-12-14T12:29:16.444Z,1513254556.444 [DataOverHttps](INFO): SBD MOMSN=5438726
2017-12-14T12:29:16.500Z,1513254556.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:16.515Z,1513254556.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:16.529Z,1513254556.529 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:29:16.614Z,1513254556.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:17.017Z,1513254557.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:17.814Z,1513254557.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:18.609Z,1513254558.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:19.015Z,1513254559.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:23.815Z,1513254563.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:24.609Z,1513254564.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:25.013Z,1513254565.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:27.810Z,1513254567.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:28.607Z,1513254568.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:29.021Z,1513254569.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:29.818Z,1513254569.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:30.614Z,1513254570.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:31.017Z,1513254571.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:31.815Z,1513254571.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:32.609Z,1513254572.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:33.406Z,1513254573.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:34.201Z,1513254574.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:34.997Z,1513254574.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:35.799Z,1513254575.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:36.595Z,1513254576.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:37.391Z,1513254577.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:37.915Z,1513254577.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:37.964Z,1513254577.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:37.967Z,1513254577.967 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T12:29:37.967Z,1513254577.967 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T12:29:37.967Z,1513254577.967 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T12:29:38.063Z,1513254578.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:38.106Z,1513254578.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:38.186Z,1513254578.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:38.894Z,1513254578.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:39.297Z,1513254579.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:39.702Z,1513254579.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:40.105Z,1513254580.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:40.902Z,1513254580.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:41.305Z,1513254581.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:42.102Z,1513254582.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:42.187Z,1513254582.187 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T12:29:42.187Z,1513254582.187 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T12:29:42.187Z,1513254582.187 [DropWeight](ERROR): Hardware Fault
2017-12-14T12:29:42.223Z,1513254582.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:42.255Z,1513254582.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:42.267Z,1513254582.267 [CBIT](INFO): Critical error at 20171214T122942
2017-12-14T12:29:42.281Z,1513254582.281 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T12:29:42.281Z,1513254582.281 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T12:29:42.366Z,1513254582.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:42.410Z,1513254582.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:42.422Z,1513254582.422 [CBIT](INFO): Critical error at 20171214T122942
2017-12-14T12:29:42.741Z,1513254582.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:42.771Z,1513254582.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:42.898Z,1513254582.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:43.125Z,1513254583.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:43.140Z,1513254583.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:43.301Z,1513254583.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:43.525Z,1513254583.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:43.578Z,1513254583.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:43.920Z,1513254583.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:43.943Z,1513254583.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:44.099Z,1513254584.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:44.339Z,1513254584.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:44.368Z,1513254584.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:44.673Z,1513254584.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:44.734Z,1513254584.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:44.766Z,1513254584.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:45.137Z,1513254585.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:45.170Z,1513254585.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:45.469Z,1513254585.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:45.531Z,1513254585.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:45.551Z,1513254585.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:45.923Z,1513254585.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:45.943Z,1513254585.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:46.267Z,1513254586.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:46.342Z,1513254586.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:46.380Z,1513254586.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:46.711Z,1513254586.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:46.747Z,1513254586.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:46.819Z,1513254586.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:47.115Z,1513254587.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:47.141Z,1513254587.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:47.506Z,1513254587.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:47.531Z,1513254587.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:47.554Z,1513254587.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:47.937Z,1513254587.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:47.959Z,1513254587.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:48.302Z,1513254588.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:48.335Z,1513254588.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:48.367Z,1513254588.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:48.710Z,1513254588.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:48.719Z,1513254588.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:48.748Z,1513254588.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:49.116Z,1513254589.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:49.159Z,1513254589.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:49.508Z,1513254589.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:49.518Z,1513254589.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:49.554Z,1513254589.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:49.914Z,1513254589.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:50.023Z,1513254590.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:50.311Z,1513254590.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:50.334Z,1513254590.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:50.419Z,1513254590.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:50.717Z,1513254590.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:50.731Z,1513254590.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:50.751Z,1513254590.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:51.129Z,1513254591.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:51.151Z,1513254591.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:51.514Z,1513254591.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:51.531Z,1513254591.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:51.579Z,1513254591.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:51.935Z,1513254591.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:52.003Z,1513254592.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:52.310Z,1513254592.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:52.367Z,1513254592.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:52.434Z,1513254592.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:52.726Z,1513254592.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:52.740Z,1513254592.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:52.741Z,1513254592.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:53.146Z,1513254593.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:53.182Z,1513254593.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:53.538Z,1513254593.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:53.542Z,1513254593.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:53.558Z,1513254593.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:53.932Z,1513254593.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:53.963Z,1513254593.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:54.336Z,1513254594.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:54.338Z,1513254594.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:54.359Z,1513254594.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:54.715Z,1513254594.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:54.740Z,1513254594.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:55.009Z,1513254595.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:55.113Z,1513254595.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:55.140Z,1513254595.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:55.529Z,1513254595.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:55.544Z,1513254595.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:55.806Z,1513254595.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:55.915Z,1513254595.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:55.943Z,1513254595.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:56.344Z,1513254596.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:56.398Z,1513254596.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:56.604Z,1513254596.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:56.737Z,1513254596.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:56.754Z,1513254596.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:57.018Z,1513254597.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:57.144Z,1513254597.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:57.160Z,1513254597.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:57.515Z,1513254597.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:57.548Z,1513254597.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:57.814Z,1513254597.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:57.919Z,1513254597.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:57.946Z,1513254597.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:58.318Z,1513254598.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:58.362Z,1513254598.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:58.609Z,1513254598.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:58.739Z,1513254598.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:58.759Z,1513254598.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:59.015Z,1513254599.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:59.119Z,1513254599.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:59.144Z,1513254599.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:59.546Z,1513254599.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:59.567Z,1513254599.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:29:59.809Z,1513254599.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:59.929Z,1513254599.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:29:59.952Z,1513254599.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:00.334Z,1513254600.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:00.363Z,1513254600.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:00.605Z,1513254600.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:00.727Z,1513254600.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:00.779Z,1513254600.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:01.009Z,1513254601.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:01.114Z,1513254601.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:01.136Z,1513254601.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:01.517Z,1513254601.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:01.555Z,1513254601.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:01.806Z,1513254601.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:01.921Z,1513254601.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:01.936Z,1513254601.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:02.354Z,1513254602.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:02.383Z,1513254602.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:02.603Z,1513254602.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:02.768Z,1513254602.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:02.807Z,1513254602.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:03.009Z,1513254603.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:03.126Z,1513254603.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:03.147Z,1513254603.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:03.523Z,1513254603.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:03.538Z,1513254603.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:03.805Z,1513254603.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:03.920Z,1513254603.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:03.940Z,1513254603.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:04.322Z,1513254604.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:04.354Z,1513254604.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:04.601Z,1513254604.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:04.725Z,1513254604.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:04.740Z,1513254604.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:05.005Z,1513254605.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:05.119Z,1513254605.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:05.142Z,1513254605.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:05.533Z,1513254605.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:05.548Z,1513254605.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:05.803Z,1513254605.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:05.984Z,1513254605.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:06.027Z,1513254606.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:06.381Z,1513254606.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:06.398Z,1513254606.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:06.597Z,1513254606.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:06.718Z,1513254606.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:06.745Z,1513254606.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:07.001Z,1513254607.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:07.125Z,1513254607.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:07.140Z,1513254607.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:07.522Z,1513254607.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:07.545Z,1513254607.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:07.798Z,1513254607.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:07.927Z,1513254607.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:07.943Z,1513254607.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:08.334Z,1513254608.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:08.351Z,1513254608.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:08.595Z,1513254608.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:08.738Z,1513254608.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:08.754Z,1513254608.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:09.013Z,1513254609.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:09.175Z,1513254609.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:09.199Z,1513254609.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:09.514Z,1513254609.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:09.551Z,1513254609.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:09.810Z,1513254609.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:09.915Z,1513254609.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:09.949Z,1513254609.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:10.315Z,1513254610.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:10.350Z,1513254610.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:10.608Z,1513254610.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:10.738Z,1513254610.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:10.754Z,1513254610.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:11.020Z,1513254611.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:11.115Z,1513254611.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:11.152Z,1513254611.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:11.538Z,1513254611.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:11.555Z,1513254611.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:11.815Z,1513254611.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:11.941Z,1513254611.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:11.957Z,1513254611.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:12.368Z,1513254612.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:12.400Z,1513254612.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:12.609Z,1513254612.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:12.735Z,1513254612.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:12.810Z,1513254612.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:13.013Z,1513254613.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:13.124Z,1513254613.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:13.152Z,1513254613.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:13.529Z,1513254613.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:13.579Z,1513254613.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:13.810Z,1513254613.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:13.923Z,1513254613.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:13.940Z,1513254613.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:14.332Z,1513254614.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:14.387Z,1513254614.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:14.605Z,1513254614.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:14.738Z,1513254614.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:14.768Z,1513254614.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:15.010Z,1513254615.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:15.134Z,1513254615.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:15.167Z,1513254615.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:15.541Z,1513254615.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:15.595Z,1513254615.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:15.805Z,1513254615.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:15.921Z,1513254615.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:15.936Z,1513254615.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:16.325Z,1513254616.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:16.370Z,1513254616.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:16.603Z,1513254616.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:16.729Z,1513254616.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:16.766Z,1513254616.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:17.009Z,1513254617.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:17.122Z,1513254617.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:17.139Z,1513254617.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:17.525Z,1513254617.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:17.541Z,1513254617.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:17.806Z,1513254617.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:17.937Z,1513254617.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:17.952Z,1513254617.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:18.331Z,1513254618.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:18.350Z,1513254618.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:18.603Z,1513254618.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:18.752Z,1513254618.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:18.790Z,1513254618.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:19.009Z,1513254619.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:19.123Z,1513254619.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:19.143Z,1513254619.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:19.524Z,1513254619.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:19.539Z,1513254619.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:19.806Z,1513254619.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:19.918Z,1513254619.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:19.945Z,1513254619.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:20.389Z,1513254620.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:20.405Z,1513254620.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:20.602Z,1513254620.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:20.737Z,1513254620.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:20.752Z,1513254620.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:21.005Z,1513254621.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:21.133Z,1513254621.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:21.231Z,1513254621.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:21.526Z,1513254621.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:21.542Z,1513254621.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:21.803Z,1513254621.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:21.933Z,1513254621.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:21.960Z,1513254621.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:22.314Z,1513254622.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:22.340Z,1513254622.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:22.599Z,1513254622.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:22.715Z,1513254622.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:22.778Z,1513254622.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:23.005Z,1513254623.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:23.116Z,1513254623.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:23.142Z,1513254623.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:23.535Z,1513254623.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:23.551Z,1513254623.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:23.802Z,1513254623.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:23.939Z,1513254623.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:23.954Z,1513254623.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:24.336Z,1513254624.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:24.360Z,1513254624.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:24.599Z,1513254624.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:24.741Z,1513254624.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:24.759Z,1513254624.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:25.013Z,1513254625.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:25.128Z,1513254625.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:25.182Z,1513254625.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:25.516Z,1513254625.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:25.543Z,1513254625.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:25.810Z,1513254625.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:25.924Z,1513254625.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:25.940Z,1513254625.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:26.333Z,1513254626.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:26.371Z,1513254626.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:26.607Z,1513254626.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:26.738Z,1513254626.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:26.770Z,1513254626.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:27.013Z,1513254627.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:27.130Z,1513254627.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:27.145Z,1513254627.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:27.524Z,1513254627.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:27.539Z,1513254627.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:27.811Z,1513254627.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:27.918Z,1513254627.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:27.933Z,1513254627.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:28.374Z,1513254628.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:28.431Z,1513254628.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:28.605Z,1513254628.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:28.732Z,1513254628.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:28.748Z,1513254628.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:29.009Z,1513254629.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:29.125Z,1513254629.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:29.140Z,1513254629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:29.526Z,1513254629.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:29.542Z,1513254629.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:29.807Z,1513254629.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:29.937Z,1513254629.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:29.952Z,1513254629.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:30.333Z,1513254630.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:30.353Z,1513254630.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:30.601Z,1513254630.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:30.718Z,1513254630.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:30.746Z,1513254630.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:30.746Z,1513254630.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 239
2017-12-14T12:30:30.746Z,1513254630.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:30:30.748Z,1513254630.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:30.748Z,1513254630.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 239
2017-12-14T12:30:30.748Z,1513254630.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:30:30.750Z,1513254630.750 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:30.750Z,1513254630.750 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 239
2017-12-14T12:30:30.750Z,1513254630.750 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:30:30.774Z,1513254630.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:30:30.774Z,1513254630.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:30:30.774Z,1513254630.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:30:31.005Z,1513254631.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:31.114Z,1513254631.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:31.152Z,1513254631.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:30:31.152Z,1513254631.152 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 239
2017-12-14T12:30:31.153Z,1513254631.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:30:31.153Z,1513254631.153 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 239
2017-12-14T12:30:31.153Z,1513254631.153 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:30:31.153Z,1513254631.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 239
2017-12-14T12:30:31.522Z,1513254631.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:31.585Z,1513254631.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:30:31.586Z,1513254631.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:30:31.586Z,1513254631.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:30:31.587Z,1513254631.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:30:31.587Z,1513254631.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:30:31.587Z,1513254631.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:30:31.588Z,1513254631.588 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:30:31.588Z,1513254631.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:30:31.588Z,1513254631.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:30:31.802Z,1513254631.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:31.946Z,1513254631.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:31.967Z,1513254631.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:32.339Z,1513254632.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:32.356Z,1513254632.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:32.597Z,1513254632.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:32.732Z,1513254632.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:32.760Z,1513254632.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:33.002Z,1513254633.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:33.135Z,1513254633.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:33.159Z,1513254633.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:33.521Z,1513254633.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:33.535Z,1513254633.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:33.797Z,1513254633.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:33.931Z,1513254633.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:33.967Z,1513254633.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:34.356Z,1513254634.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:34.427Z,1513254634.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:34.594Z,1513254634.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:34.774Z,1513254634.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:34.806Z,1513254634.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:34.998Z,1513254634.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:35.122Z,1513254635.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:35.186Z,1513254635.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:35.536Z,1513254635.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:35.553Z,1513254635.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:35.794Z,1513254635.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:35.936Z,1513254635.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:35.951Z,1513254635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:36.338Z,1513254636.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:36.384Z,1513254636.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:36.591Z,1513254636.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:36.715Z,1513254636.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:36.748Z,1513254636.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:37.029Z,1513254637.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:37.124Z,1513254637.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:37.185Z,1513254637.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:37.515Z,1513254637.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:37.585Z,1513254637.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:37.827Z,1513254637.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:37.919Z,1513254637.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:37.991Z,1513254637.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:38.037Z,1513254638.037 [CBIT](IMPORTANT): Beginning ground fault scan
2017-12-14T12:30:38.338Z,1513254638.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:38.354Z,1513254638.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:38.631Z,1513254638.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:39.033Z,1513254639.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:39.830Z,1513254639.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:40.627Z,1513254640.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:41.033Z,1513254641.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:41.798Z,1513254641.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:41.814Z,1513254641.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:41.830Z,1513254641.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:41.995Z,1513254641.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:42.010Z,1513254642.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:42.388Z,1513254642.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:42.402Z,1513254642.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:42.625Z,1513254642.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:42.793Z,1513254642.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:42.808Z,1513254642.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:43.029Z,1513254643.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:43.183Z,1513254643.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:43.211Z,1513254643.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:43.602Z,1513254643.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:43.616Z,1513254643.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:43.826Z,1513254643.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:44.005Z,1513254644.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:44.020Z,1513254644.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:44.402Z,1513254644.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:44.423Z,1513254644.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:44.621Z,1513254644.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:44.785Z,1513254644.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:44.816Z,1513254644.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:45.026Z,1513254645.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:45.187Z,1513254645.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:45.239Z,1513254645.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:45.583Z,1513254645.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:45.600Z,1513254645.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:45.821Z,1513254645.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:45.983Z,1513254645.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:45.998Z,1513254645.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:46.401Z,1513254646.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:46.424Z,1513254646.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:46.618Z,1513254646.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:46.801Z,1513254646.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:46.824Z,1513254646.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:47.025Z,1513254647.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:47.197Z,1513254647.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:47.227Z,1513254647.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:47.590Z,1513254647.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:47.630Z,1513254647.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:47.822Z,1513254647.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:47.991Z,1513254647.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:48.023Z,1513254648.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:48.383Z,1513254648.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:48.397Z,1513254648.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:48.618Z,1513254648.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:48.791Z,1513254648.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:48.827Z,1513254648.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:49.021Z,1513254649.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:49.190Z,1513254649.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:49.205Z,1513254649.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:49.601Z,1513254649.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:49.632Z,1513254649.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:49.818Z,1513254649.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:50.001Z,1513254650.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:50.031Z,1513254650.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:50.394Z,1513254650.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:50.431Z,1513254650.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:50.615Z,1513254650.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:50.787Z,1513254650.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:50.815Z,1513254650.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:51.021Z,1513254651.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:51.172Z,1513254651.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:51.199Z,1513254651.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:51.216Z,1513254651.216 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.132218
CHAN A1 (24V): 0.129069
CHAN A2 (12V): 0.000466
CHAN A3 (5V): -0.001253
CHAN B0 (3.3V): -0.000881
CHAN B1 (3.15aV): -0.001094
CHAN B2 (3.15bV): -0.002055
CHAN B3 (GND): -0.002272
OPEN: 0.003590
Full Scale Calc: 4.765 mA, -1.589 mA
2017-12-14T12:30:51.601Z,1513254651.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:51.616Z,1513254651.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:51.818Z,1513254651.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:51.997Z,1513254651.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:52.012Z,1513254652.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:52.403Z,1513254652.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:52.418Z,1513254652.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:52.615Z,1513254652.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:52.796Z,1513254652.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:52.830Z,1513254652.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:53.023Z,1513254653.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:53.203Z,1513254653.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:53.219Z,1513254653.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:53.579Z,1513254653.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:53.606Z,1513254653.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:53.818Z,1513254653.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:54.012Z,1513254654.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:54.036Z,1513254654.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:54.383Z,1513254654.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:54.417Z,1513254654.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:54.613Z,1513254654.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:54.780Z,1513254654.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:54.808Z,1513254654.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:55.018Z,1513254655.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:55.179Z,1513254655.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:55.220Z,1513254655.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:55.593Z,1513254655.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:55.625Z,1513254655.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:55.814Z,1513254655.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:55.994Z,1513254655.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:56.021Z,1513254656.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:56.390Z,1513254656.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:56.398Z,1513254656.398 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T12:30:56.398Z,1513254656.398 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:30:56.398Z,1513254656.398 [BPC1](ERROR): Data Fault
2017-12-14T12:30:56.427Z,1513254656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:56.453Z,1513254656.453 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:30:56.610Z,1513254656.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:56.788Z,1513254656.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:56.803Z,1513254656.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:57.021Z,1513254657.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:57.234Z,1513254657.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:57.258Z,1513254657.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:57.586Z,1513254657.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:57.610Z,1513254657.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:57.640Z,1513254657.640 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:30:57.640Z,1513254657.640 [BPC1] No Fault, FailCount= 1
2017-12-14T12:30:57.826Z,1513254657.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:57.992Z,1513254657.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:58.059Z,1513254658.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:58.394Z,1513254658.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:58.415Z,1513254658.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:58.623Z,1513254658.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:58.795Z,1513254658.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:58.809Z,1513254658.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:59.029Z,1513254659.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:59.195Z,1513254659.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:59.215Z,1513254659.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:59.576Z,1513254659.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:59.604Z,1513254659.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:30:59.826Z,1513254659.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:30:59.987Z,1513254659.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:00.004Z,1513254660.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:00.418Z,1513254660.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:00.451Z,1513254660.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:00.622Z,1513254660.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:00.782Z,1513254660.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:00.815Z,1513254660.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:01.027Z,1513254661.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:01.180Z,1513254661.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:01.203Z,1513254661.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:01.602Z,1513254661.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:01.623Z,1513254661.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:01.822Z,1513254661.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:01.991Z,1513254661.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:02.018Z,1513254662.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:02.399Z,1513254662.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:02.413Z,1513254662.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:02.618Z,1513254662.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:02.779Z,1513254662.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:02.811Z,1513254662.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:03.032Z,1513254663.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:03.191Z,1513254663.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:03.211Z,1513254663.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:03.611Z,1513254663.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:03.651Z,1513254663.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:03.826Z,1513254663.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:03.978Z,1513254663.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:04.014Z,1513254664.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:04.398Z,1513254664.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:04.413Z,1513254664.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:04.622Z,1513254664.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:04.799Z,1513254664.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:04.818Z,1513254664.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:05.025Z,1513254665.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:05.203Z,1513254665.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:05.218Z,1513254665.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:05.576Z,1513254665.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:05.613Z,1513254665.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:05.824Z,1513254665.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:05.979Z,1513254665.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:06.011Z,1513254666.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:06.378Z,1513254666.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:06.448Z,1513254666.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:06.622Z,1513254666.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:06.823Z,1513254666.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:06.864Z,1513254666.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:07.025Z,1513254667.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:07.179Z,1513254667.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:07.205Z,1513254667.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:07.603Z,1513254667.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:07.618Z,1513254667.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:07.822Z,1513254667.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:08.006Z,1513254668.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:08.021Z,1513254668.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:08.399Z,1513254668.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:08.419Z,1513254668.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:08.617Z,1513254668.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:08.779Z,1513254668.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:08.816Z,1513254668.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:09.022Z,1513254669.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:09.183Z,1513254669.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:09.208Z,1513254669.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:09.579Z,1513254669.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:09.603Z,1513254669.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:09.818Z,1513254669.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:10.005Z,1513254670.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:10.063Z,1513254670.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:10.399Z,1513254670.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:10.414Z,1513254670.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:10.613Z,1513254670.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:10.800Z,1513254670.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:10.826Z,1513254670.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:11.018Z,1513254671.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:11.199Z,1513254671.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:11.214Z,1513254671.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:11.576Z,1513254671.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:11.599Z,1513254671.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:11.814Z,1513254671.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:11.978Z,1513254671.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:12.015Z,1513254672.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:12.378Z,1513254672.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:12.417Z,1513254672.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:12.611Z,1513254672.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:12.792Z,1513254672.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:12.816Z,1513254672.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:13.021Z,1513254673.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:13.223Z,1513254673.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:13.251Z,1513254673.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:13.601Z,1513254673.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:13.630Z,1513254673.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:13.819Z,1513254673.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:14.001Z,1513254674.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:14.025Z,1513254674.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:14.410Z,1513254674.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:14.446Z,1513254674.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:14.614Z,1513254674.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:14.801Z,1513254674.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:14.844Z,1513254674.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:15.017Z,1513254675.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:15.181Z,1513254675.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:15.216Z,1513254675.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:15.582Z,1513254675.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:15.618Z,1513254675.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:15.816Z,1513254675.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:15.980Z,1513254675.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:16.020Z,1513254676.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:16.431Z,1513254676.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:16.475Z,1513254676.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:16.610Z,1513254676.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:16.815Z,1513254676.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:16.859Z,1513254676.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:17.014Z,1513254677.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:17.224Z,1513254677.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:17.255Z,1513254677.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:17.590Z,1513254677.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:17.639Z,1513254677.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:17.810Z,1513254677.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:17.981Z,1513254677.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:18.035Z,1513254678.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:18.384Z,1513254678.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:18.515Z,1513254678.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:18.612Z,1513254678.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:18.808Z,1513254678.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:18.839Z,1513254678.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:19.062Z,1513254679.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:19.180Z,1513254679.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:19.214Z,1513254679.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:19.601Z,1513254679.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:19.671Z,1513254679.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:19.858Z,1513254679.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:19.996Z,1513254679.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:20.037Z,1513254680.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:20.416Z,1513254680.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:20.503Z,1513254680.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:20.654Z,1513254680.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:20.792Z,1513254680.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:20.820Z,1513254680.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:21.057Z,1513254681.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:21.180Z,1513254681.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:21.218Z,1513254681.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:21.587Z,1513254681.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:21.614Z,1513254681.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:21.854Z,1513254681.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:21.980Z,1513254681.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:22.027Z,1513254682.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:22.392Z,1513254682.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:22.431Z,1513254682.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:22.649Z,1513254682.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:22.803Z,1513254682.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:22.818Z,1513254682.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:23.054Z,1513254683.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:23.221Z,1513254683.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:23.236Z,1513254683.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:23.580Z,1513254683.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:23.621Z,1513254683.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:23.852Z,1513254683.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:24.016Z,1513254684.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:24.033Z,1513254684.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:24.383Z,1513254684.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:24.411Z,1513254684.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:24.645Z,1513254684.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:24.804Z,1513254684.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:24.819Z,1513254684.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:25.049Z,1513254685.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:25.185Z,1513254685.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:25.214Z,1513254685.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:25.598Z,1513254685.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:25.623Z,1513254685.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:25.846Z,1513254685.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:26.010Z,1513254686.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:26.046Z,1513254686.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:26.398Z,1513254686.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:26.412Z,1513254686.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:26.641Z,1513254686.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:26.812Z,1513254686.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:26.827Z,1513254686.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:27.045Z,1513254687.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:27.181Z,1513254687.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:27.212Z,1513254687.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:27.581Z,1513254687.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:27.620Z,1513254687.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:27.842Z,1513254687.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:27.984Z,1513254687.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:28.026Z,1513254688.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:28.396Z,1513254688.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:28.432Z,1513254688.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:28.639Z,1513254688.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:28.813Z,1513254688.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:28.878Z,1513254688.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:29.042Z,1513254689.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:29.199Z,1513254689.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:29.247Z,1513254689.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:29.586Z,1513254689.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:29.629Z,1513254689.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:29.838Z,1513254689.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:29.988Z,1513254689.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:30.029Z,1513254690.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:30.389Z,1513254690.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:30.437Z,1513254690.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:30.634Z,1513254690.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:30.814Z,1513254690.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:30.847Z,1513254690.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:31.038Z,1513254691.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:31.191Z,1513254691.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:31.215Z,1513254691.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:31.594Z,1513254691.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:31.637Z,1513254691.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:31.834Z,1513254691.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:31.999Z,1513254691.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:32.042Z,1513254692.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:32.401Z,1513254692.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:32.445Z,1513254692.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:32.632Z,1513254692.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:32.810Z,1513254692.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:32.888Z,1513254692.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:33.045Z,1513254693.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:33.181Z,1513254693.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:33.216Z,1513254693.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:33.595Z,1513254693.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:33.615Z,1513254693.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:33.842Z,1513254693.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:33.980Z,1513254693.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:34.045Z,1513254694.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:34.402Z,1513254694.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:34.425Z,1513254694.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:34.640Z,1513254694.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:34.817Z,1513254694.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:34.857Z,1513254694.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:35.046Z,1513254695.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:35.201Z,1513254695.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:35.233Z,1513254695.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:35.596Z,1513254695.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:35.620Z,1513254695.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:35.846Z,1513254695.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:36.023Z,1513254696.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:36.068Z,1513254696.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:36.381Z,1513254696.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:36.432Z,1513254696.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:36.642Z,1513254696.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:36.781Z,1513254696.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:36.818Z,1513254696.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:37.046Z,1513254697.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:37.185Z,1513254697.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:37.227Z,1513254697.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:37.595Z,1513254697.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:37.629Z,1513254697.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:37.842Z,1513254697.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:37.995Z,1513254697.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:38.027Z,1513254698.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:38.400Z,1513254698.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:38.434Z,1513254698.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:38.637Z,1513254698.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:39.042Z,1513254699.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:39.838Z,1513254699.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:40.634Z,1513254700.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:41.038Z,1513254701.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:41.834Z,1513254701.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:42.630Z,1513254702.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:43.033Z,1513254703.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:43.830Z,1513254703.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:44.626Z,1513254704.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:45.029Z,1513254705.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:45.165Z,1513254705.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:45.244Z,1513254705.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:45.385Z,1513254705.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:45.418Z,1513254705.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:45.730Z,1513254705.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:45.771Z,1513254705.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:45.827Z,1513254705.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:46.136Z,1513254706.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:46.183Z,1513254706.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:46.528Z,1513254706.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:46.623Z,1513254706.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:46.631Z,1513254706.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:46.916Z,1513254706.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:46.985Z,1513254706.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:47.025Z,1513254707.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:47.315Z,1513254707.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:47.443Z,1513254707.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:47.727Z,1513254707.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:47.744Z,1513254707.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:47.822Z,1513254707.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:48.115Z,1513254708.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:48.177Z,1513254708.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:48.530Z,1513254708.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:48.593Z,1513254708.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:48.619Z,1513254708.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:48.941Z,1513254708.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:48.957Z,1513254708.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:49.022Z,1513254709.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:49.331Z,1513254709.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:49.375Z,1513254709.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:49.721Z,1513254709.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:49.755Z,1513254709.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:49.818Z,1513254709.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:50.110Z,1513254710.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:50.146Z,1513254710.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:50.525Z,1513254710.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:50.540Z,1513254710.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:50.613Z,1513254710.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:50.920Z,1513254710.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:50.940Z,1513254710.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:51.018Z,1513254711.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:51.327Z,1513254711.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:51.347Z,1513254711.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:51.733Z,1513254711.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:51.747Z,1513254711.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:51.814Z,1513254711.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:52.134Z,1513254712.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:52.148Z,1513254712.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:52.543Z,1513254712.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:52.584Z,1513254712.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:52.611Z,1513254712.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:52.924Z,1513254712.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:52.939Z,1513254712.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:53.021Z,1513254713.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:53.324Z,1513254713.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:53.339Z,1513254713.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:53.724Z,1513254713.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:53.743Z,1513254713.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:53.823Z,1513254713.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:54.123Z,1513254714.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:54.138Z,1513254714.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:54.556Z,1513254714.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:54.571Z,1513254714.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:54.617Z,1513254714.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:54.930Z,1513254714.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:54.944Z,1513254714.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:55.021Z,1513254715.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:55.325Z,1513254715.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:55.347Z,1513254715.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:55.757Z,1513254715.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:55.818Z,1513254715.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:55.834Z,1513254715.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:56.122Z,1513254716.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:56.137Z,1513254716.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:56.521Z,1513254716.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:56.582Z,1513254716.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:56.634Z,1513254716.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:56.927Z,1513254716.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:56.942Z,1513254716.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:57.037Z,1513254717.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:57.335Z,1513254717.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:57.350Z,1513254717.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:57.735Z,1513254717.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:57.751Z,1513254717.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:57.833Z,1513254717.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:58.136Z,1513254718.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:58.150Z,1513254718.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:58.535Z,1513254718.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:58.550Z,1513254718.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:58.629Z,1513254718.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:58.960Z,1513254718.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:58.994Z,1513254718.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:59.033Z,1513254719.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:59.314Z,1513254719.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:59.348Z,1513254719.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:59.719Z,1513254719.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:31:59.744Z,1513254719.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:31:59.830Z,1513254719.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:00.114Z,1513254720.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:00.140Z,1513254720.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:00.538Z,1513254720.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:00.621Z,1513254720.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:00.625Z,1513254720.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:00.934Z,1513254720.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:00.958Z,1513254720.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:01.029Z,1513254721.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:01.334Z,1513254721.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:01.356Z,1513254721.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:01.718Z,1513254721.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:01.733Z,1513254721.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:01.827Z,1513254721.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:02.109Z,1513254722.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:02.148Z,1513254722.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:02.524Z,1513254722.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:02.547Z,1513254722.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:02.621Z,1513254722.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:02.937Z,1513254722.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:02.959Z,1513254722.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:03.045Z,1513254723.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:03.331Z,1513254723.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:03.352Z,1513254723.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:03.741Z,1513254723.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:03.763Z,1513254723.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:03.841Z,1513254723.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:04.125Z,1513254724.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:04.159Z,1513254724.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:04.521Z,1513254724.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:04.536Z,1513254724.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:04.637Z,1513254724.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:04.923Z,1513254724.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:04.963Z,1513254724.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:05.041Z,1513254725.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:05.361Z,1513254725.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:05.414Z,1513254725.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:05.722Z,1513254725.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:05.738Z,1513254725.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:05.839Z,1513254725.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:06.164Z,1513254726.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:06.178Z,1513254726.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:06.534Z,1513254726.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:06.549Z,1513254726.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:06.633Z,1513254726.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:06.938Z,1513254726.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:06.958Z,1513254726.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:07.037Z,1513254727.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:07.329Z,1513254727.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:07.351Z,1513254727.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:07.728Z,1513254727.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:07.744Z,1513254727.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:07.834Z,1513254727.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:08.124Z,1513254728.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:08.139Z,1513254728.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:08.566Z,1513254728.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:08.629Z,1513254728.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:08.680Z,1513254728.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:08.975Z,1513254728.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:09.006Z,1513254729.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:09.033Z,1513254729.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:09.340Z,1513254729.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:09.355Z,1513254729.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:09.736Z,1513254729.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:09.785Z,1513254729.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:09.830Z,1513254729.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:10.135Z,1513254730.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:10.150Z,1513254730.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:10.515Z,1513254730.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:10.586Z,1513254730.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:10.626Z,1513254730.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:10.916Z,1513254730.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:10.942Z,1513254730.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:11.029Z,1513254731.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:11.316Z,1513254731.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:11.342Z,1513254731.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:11.715Z,1513254731.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:11.755Z,1513254731.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:11.826Z,1513254731.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:12.114Z,1513254732.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:12.149Z,1513254732.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:12.526Z,1513254732.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:12.621Z,1513254732.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:12.663Z,1513254732.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:12.938Z,1513254732.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:12.971Z,1513254732.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:13.027Z,1513254733.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:13.328Z,1513254733.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:13.354Z,1513254733.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:13.720Z,1513254733.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:13.756Z,1513254733.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:13.822Z,1513254733.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:14.114Z,1513254734.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:14.156Z,1513254734.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:14.619Z,1513254734.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:14.661Z,1513254734.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:14.704Z,1513254734.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:14.938Z,1513254734.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:14.983Z,1513254734.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:15.049Z,1513254735.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:15.333Z,1513254735.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:15.357Z,1513254735.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:15.733Z,1513254735.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:15.759Z,1513254735.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:15.845Z,1513254735.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:16.134Z,1513254736.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:16.163Z,1513254736.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:16.520Z,1513254736.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:16.540Z,1513254736.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:16.642Z,1513254736.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:16.923Z,1513254736.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:16.937Z,1513254736.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:17.045Z,1513254737.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:17.328Z,1513254737.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:17.343Z,1513254737.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:17.719Z,1513254737.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:17.741Z,1513254737.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:17.842Z,1513254737.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:18.152Z,1513254738.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:18.285Z,1513254738.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:18.536Z,1513254738.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:18.551Z,1513254738.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:18.637Z,1513254738.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:18.945Z,1513254738.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:19.001Z,1513254739.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:19.041Z,1513254739.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:19.338Z,1513254739.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:19.354Z,1513254739.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:19.720Z,1513254739.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:19.745Z,1513254739.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:19.838Z,1513254739.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:20.115Z,1513254740.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:20.151Z,1513254740.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:20.516Z,1513254740.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:20.547Z,1513254740.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:20.633Z,1513254740.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:20.921Z,1513254740.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:20.988Z,1513254740.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:21.037Z,1513254741.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:21.340Z,1513254741.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:21.355Z,1513254741.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:21.739Z,1513254741.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:21.754Z,1513254741.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:21.833Z,1513254741.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:22.126Z,1513254742.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:22.159Z,1513254742.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:22.525Z,1513254742.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:22.560Z,1513254742.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:22.629Z,1513254742.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:22.926Z,1513254742.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:22.965Z,1513254742.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:23.033Z,1513254743.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:23.316Z,1513254743.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:23.332Z,1513254743.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:23.721Z,1513254743.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:23.764Z,1513254743.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:23.830Z,1513254743.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:24.121Z,1513254744.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:24.136Z,1513254744.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:24.541Z,1513254744.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:24.582Z,1513254744.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:24.626Z,1513254744.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:24.931Z,1513254744.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:24.968Z,1513254744.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:25.029Z,1513254745.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:25.330Z,1513254745.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:25.351Z,1513254745.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:25.724Z,1513254745.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:25.740Z,1513254745.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:25.827Z,1513254745.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:26.120Z,1513254746.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:26.136Z,1513254746.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:26.524Z,1513254746.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:26.544Z,1513254746.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:26.621Z,1513254746.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:26.919Z,1513254746.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:26.950Z,1513254746.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:27.025Z,1513254747.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:27.334Z,1513254747.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:27.353Z,1513254747.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:27.748Z,1513254747.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:27.787Z,1513254747.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:27.822Z,1513254747.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:28.133Z,1513254748.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:28.149Z,1513254748.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:28.522Z,1513254748.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:28.545Z,1513254748.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:28.618Z,1513254748.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:28.915Z,1513254748.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:28.946Z,1513254748.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:29.041Z,1513254749.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:29.316Z,1513254749.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:29.347Z,1513254749.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:29.717Z,1513254749.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:29.751Z,1513254749.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:29.838Z,1513254749.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:30.118Z,1513254750.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:30.151Z,1513254750.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:30.537Z,1513254750.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:30.633Z,1513254750.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:30.658Z,1513254750.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:30.954Z,1513254750.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:31.036Z,1513254751.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:31.037Z,1513254751.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:31.337Z,1513254751.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:31.362Z,1513254751.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:31.724Z,1513254751.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:31.787Z,1513254751.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:31.834Z,1513254751.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:32.121Z,1513254752.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:32.140Z,1513254752.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:32.524Z,1513254752.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:32.575Z,1513254752.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:32.629Z,1513254752.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:32.924Z,1513254752.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:32.939Z,1513254752.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:33.033Z,1513254753.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:33.329Z,1513254753.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:33.344Z,1513254753.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:33.737Z,1513254753.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:33.780Z,1513254753.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:33.829Z,1513254753.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:34.125Z,1513254754.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:34.140Z,1513254754.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:34.515Z,1513254754.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:34.547Z,1513254754.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:34.625Z,1513254754.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:34.915Z,1513254754.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:34.948Z,1513254754.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:35.029Z,1513254755.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:35.315Z,1513254755.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:35.346Z,1513254755.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:35.715Z,1513254755.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:35.746Z,1513254755.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:35.826Z,1513254755.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:36.114Z,1513254756.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:36.153Z,1513254756.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:36.526Z,1513254756.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:36.552Z,1513254756.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:36.621Z,1513254756.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:36.933Z,1513254756.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:36.964Z,1513254756.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:37.026Z,1513254757.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:37.324Z,1513254757.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:37.365Z,1513254757.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:37.715Z,1513254757.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:37.752Z,1513254757.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:37.822Z,1513254757.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:38.115Z,1513254758.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:38.135Z,1513254758.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:38.529Z,1513254758.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:38.562Z,1513254758.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:38.619Z,1513254758.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:39.029Z,1513254759.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:39.825Z,1513254759.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:40.622Z,1513254760.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:41.025Z,1513254761.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:41.823Z,1513254761.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:41.964Z,1513254761.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:42.015Z,1513254762.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:42.126Z,1513254762.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:42.163Z,1513254762.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:42.481Z,1513254762.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:42.515Z,1513254762.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:42.619Z,1513254762.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:42.883Z,1513254762.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:42.912Z,1513254762.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:43.029Z,1513254763.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:43.272Z,1513254763.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:43.292Z,1513254763.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:43.672Z,1513254763.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:43.687Z,1513254763.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:43.826Z,1513254763.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:44.070Z,1513254764.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:44.091Z,1513254764.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:44.478Z,1513254764.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:44.493Z,1513254764.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:44.622Z,1513254764.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:44.878Z,1513254764.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:44.899Z,1513254764.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:45.026Z,1513254765.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:45.278Z,1513254765.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:45.294Z,1513254765.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:45.672Z,1513254765.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:45.691Z,1513254765.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:45.821Z,1513254765.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:46.072Z,1513254766.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:46.087Z,1513254766.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:46.472Z,1513254766.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:46.495Z,1513254766.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:46.619Z,1513254766.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:46.905Z,1513254766.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:46.963Z,1513254766.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:47.029Z,1513254767.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:47.273Z,1513254767.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:47.306Z,1513254767.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:47.681Z,1513254767.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:47.706Z,1513254767.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:47.826Z,1513254767.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:48.082Z,1513254768.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:48.107Z,1513254768.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:48.470Z,1513254768.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:48.503Z,1513254768.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:48.621Z,1513254768.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:48.869Z,1513254768.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:48.884Z,1513254768.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:49.025Z,1513254769.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:49.278Z,1513254769.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:49.309Z,1513254769.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:49.681Z,1513254769.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:49.708Z,1513254769.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:49.823Z,1513254769.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:50.082Z,1513254770.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:50.157Z,1513254770.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:50.463Z,1513254770.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:50.490Z,1513254770.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:50.617Z,1513254770.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:50.880Z,1513254770.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:50.894Z,1513254770.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:51.021Z,1513254771.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:51.288Z,1513254771.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:51.303Z,1513254771.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:51.690Z,1513254771.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:51.705Z,1513254771.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:51.818Z,1513254771.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:52.084Z,1513254772.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:52.100Z,1513254772.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:52.464Z,1513254772.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:52.495Z,1513254772.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:52.613Z,1513254772.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:52.871Z,1513254772.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:52.902Z,1513254772.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:53.019Z,1513254773.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:53.274Z,1513254773.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:53.308Z,1513254773.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:53.703Z,1513254773.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:53.723Z,1513254773.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:53.814Z,1513254773.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:54.091Z,1513254774.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:54.131Z,1513254774.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:54.471Z,1513254774.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:54.504Z,1513254774.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:54.609Z,1513254774.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:54.870Z,1513254774.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:54.898Z,1513254774.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:55.015Z,1513254775.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:55.282Z,1513254775.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:55.352Z,1513254775.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:55.682Z,1513254775.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:55.703Z,1513254775.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:55.809Z,1513254775.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:56.080Z,1513254776.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:56.131Z,1513254776.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:56.487Z,1513254776.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:56.530Z,1513254776.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:56.607Z,1513254776.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:56.862Z,1513254776.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:56.880Z,1513254776.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:57.029Z,1513254777.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:57.270Z,1513254777.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:57.298Z,1513254777.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:57.686Z,1513254777.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:57.719Z,1513254777.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:57.827Z,1513254777.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:58.081Z,1513254778.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:58.106Z,1513254778.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:58.469Z,1513254778.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:58.484Z,1513254778.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:58.622Z,1513254778.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:58.878Z,1513254778.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:58.915Z,1513254778.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:59.025Z,1513254779.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:59.285Z,1513254779.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:59.313Z,1513254779.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:59.681Z,1513254779.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:32:59.696Z,1513254779.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:32:59.822Z,1513254779.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:00.080Z,1513254780.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:00.095Z,1513254780.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:00.478Z,1513254780.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:00.493Z,1513254780.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:00.617Z,1513254780.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:00.864Z,1513254780.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:00.899Z,1513254780.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:01.022Z,1513254781.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:01.284Z,1513254781.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:01.300Z,1513254781.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:01.684Z,1513254781.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:01.699Z,1513254781.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:01.817Z,1513254781.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:02.081Z,1513254782.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:02.096Z,1513254782.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:02.473Z,1513254782.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:02.488Z,1513254782.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:02.615Z,1513254782.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:02.902Z,1513254782.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:02.944Z,1513254782.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:03.021Z,1513254783.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:03.284Z,1513254783.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:03.299Z,1513254783.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:03.686Z,1513254783.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:03.707Z,1513254783.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:03.820Z,1513254783.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:04.081Z,1513254784.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:04.096Z,1513254784.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:04.463Z,1513254784.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:04.532Z,1513254784.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:04.615Z,1513254784.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:04.862Z,1513254784.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:04.895Z,1513254784.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:05.025Z,1513254785.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:05.283Z,1513254785.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:05.304Z,1513254785.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:05.690Z,1513254785.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:05.705Z,1513254785.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:05.823Z,1513254785.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:06.093Z,1513254786.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:06.132Z,1513254786.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:06.471Z,1513254786.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:06.502Z,1513254786.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:06.617Z,1513254786.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:06.862Z,1513254786.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:06.883Z,1513254786.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:07.021Z,1513254787.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:07.281Z,1513254787.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:07.305Z,1513254787.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:07.681Z,1513254787.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:07.708Z,1513254787.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:07.818Z,1513254787.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:08.078Z,1513254788.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:08.109Z,1513254788.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:08.468Z,1513254788.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:08.484Z,1513254788.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:08.613Z,1513254788.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:08.875Z,1513254788.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:08.910Z,1513254788.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:09.018Z,1513254789.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:09.277Z,1513254789.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:09.292Z,1513254789.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:09.677Z,1513254789.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:09.699Z,1513254789.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:09.814Z,1513254789.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:10.077Z,1513254790.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:10.107Z,1513254790.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:10.468Z,1513254790.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:10.483Z,1513254790.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:10.611Z,1513254790.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:10.868Z,1513254790.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:10.884Z,1513254790.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:11.021Z,1513254791.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:11.281Z,1513254791.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:11.310Z,1513254791.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:11.682Z,1513254791.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:11.707Z,1513254791.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:11.819Z,1513254791.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:12.086Z,1513254792.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:12.115Z,1513254792.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:12.485Z,1513254792.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:12.522Z,1513254792.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:12.616Z,1513254792.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:12.869Z,1513254792.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:12.889Z,1513254792.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:13.037Z,1513254793.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:13.281Z,1513254793.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:13.297Z,1513254793.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:13.684Z,1513254793.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:13.703Z,1513254793.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:13.834Z,1513254793.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:14.085Z,1513254794.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:14.100Z,1513254794.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:14.473Z,1513254794.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:14.488Z,1513254794.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:14.629Z,1513254794.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:14.885Z,1513254794.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:14.950Z,1513254794.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:15.033Z,1513254795.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:15.282Z,1513254795.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:15.297Z,1513254795.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:15.684Z,1513254795.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:15.700Z,1513254795.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:15.830Z,1513254795.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:16.082Z,1513254796.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:16.097Z,1513254796.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:16.464Z,1513254796.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:16.539Z,1513254796.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:16.625Z,1513254796.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:16.879Z,1513254796.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:16.894Z,1513254796.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:17.029Z,1513254797.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:17.282Z,1513254797.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:17.303Z,1513254797.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:17.690Z,1513254797.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:17.743Z,1513254797.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:17.826Z,1513254797.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:18.082Z,1513254798.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:18.098Z,1513254798.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:18.463Z,1513254798.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:18.520Z,1513254798.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:18.627Z,1513254798.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:18.874Z,1513254798.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:18.914Z,1513254798.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:19.034Z,1513254799.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:19.294Z,1513254799.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:19.315Z,1513254799.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:19.691Z,1513254799.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:19.706Z,1513254799.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:19.829Z,1513254799.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:20.082Z,1513254800.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:20.098Z,1513254800.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:20.463Z,1513254800.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:20.494Z,1513254800.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:20.628Z,1513254800.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:20.861Z,1513254800.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:20.888Z,1513254800.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:21.033Z,1513254801.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:21.273Z,1513254801.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:21.309Z,1513254801.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:21.690Z,1513254801.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:21.705Z,1513254801.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:21.830Z,1513254801.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:22.072Z,1513254802.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:22.100Z,1513254802.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:22.463Z,1513254802.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:22.503Z,1513254802.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:22.625Z,1513254802.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:22.870Z,1513254802.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:22.907Z,1513254802.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:23.029Z,1513254803.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:23.273Z,1513254803.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:23.308Z,1513254803.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:23.681Z,1513254803.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:23.715Z,1513254803.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:23.826Z,1513254803.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:24.078Z,1513254804.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:24.105Z,1513254804.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:24.463Z,1513254804.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:24.480Z,1513254804.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:24.622Z,1513254804.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:24.868Z,1513254804.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:24.882Z,1513254804.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:25.026Z,1513254805.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:25.298Z,1513254805.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:25.322Z,1513254805.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:25.677Z,1513254805.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:25.691Z,1513254805.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:25.822Z,1513254805.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:26.070Z,1513254806.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:26.084Z,1513254806.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:26.473Z,1513254806.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:26.488Z,1513254806.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:26.621Z,1513254806.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:26.872Z,1513254806.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:26.931Z,1513254806.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:27.029Z,1513254807.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:27.270Z,1513254807.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:27.284Z,1513254807.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:27.685Z,1513254807.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:27.716Z,1513254807.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:27.825Z,1513254807.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:28.085Z,1513254808.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:28.118Z,1513254808.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:28.534Z,1513254808.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:28.578Z,1513254808.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:28.622Z,1513254808.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:28.868Z,1513254808.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:28.895Z,1513254808.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:29.025Z,1513254809.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:29.285Z,1513254809.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:29.307Z,1513254809.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:29.681Z,1513254809.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:29.696Z,1513254809.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:29.823Z,1513254809.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:30.085Z,1513254810.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:30.100Z,1513254810.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:30.474Z,1513254810.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:30.495Z,1513254810.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:30.617Z,1513254810.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:30.867Z,1513254810.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:30.903Z,1513254810.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:31.021Z,1513254811.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:31.283Z,1513254811.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:31.298Z,1513254811.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:31.710Z,1513254811.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:31.768Z,1513254811.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:31.768Z,1513254811.768 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 240
2017-12-14T12:33:31.768Z,1513254811.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:33:31.770Z,1513254811.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:31.770Z,1513254811.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 240
2017-12-14T12:33:31.770Z,1513254811.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:33:31.772Z,1513254811.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:31.772Z,1513254811.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 240
2017-12-14T12:33:31.772Z,1513254811.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:33:31.818Z,1513254811.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:31.823Z,1513254811.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:33:31.823Z,1513254811.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:33:31.823Z,1513254811.823 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:33:32.074Z,1513254812.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:32.112Z,1513254812.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:33:32.112Z,1513254812.112 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 240
2017-12-14T12:33:32.112Z,1513254812.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:33:32.112Z,1513254812.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 240
2017-12-14T12:33:32.117Z,1513254812.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:33:32.117Z,1513254812.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 240
2017-12-14T12:33:32.475Z,1513254812.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:32.488Z,1513254812.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:33:32.489Z,1513254812.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:33:32.489Z,1513254812.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:33:32.489Z,1513254812.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:33:32.490Z,1513254812.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:33:32.490Z,1513254812.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:33:32.490Z,1513254812.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:33:32.491Z,1513254812.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:33:32.491Z,1513254812.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:33:32.613Z,1513254812.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:32.878Z,1513254812.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:32.893Z,1513254812.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:33.018Z,1513254813.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:33.276Z,1513254813.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:33.307Z,1513254813.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:33.682Z,1513254813.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:33.697Z,1513254813.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:33.814Z,1513254813.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:34.081Z,1513254814.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:34.098Z,1513254814.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:34.473Z,1513254814.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:34.488Z,1513254814.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:34.609Z,1513254814.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:34.866Z,1513254814.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:34.894Z,1513254814.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:35.017Z,1513254815.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:35.290Z,1513254815.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:35.323Z,1513254815.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:35.683Z,1513254815.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:35.715Z,1513254815.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:35.814Z,1513254815.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:36.087Z,1513254816.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:36.112Z,1513254816.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:36.479Z,1513254816.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:36.518Z,1513254816.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:36.613Z,1513254816.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:36.871Z,1513254816.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:36.891Z,1513254816.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:37.021Z,1513254817.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:37.273Z,1513254817.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:37.288Z,1513254817.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:37.677Z,1513254817.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:37.737Z,1513254817.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:37.819Z,1513254817.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:38.089Z,1513254818.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:38.128Z,1513254818.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:38.470Z,1513254818.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:38.492Z,1513254818.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:38.621Z,1513254818.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:38.872Z,1513254818.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:38.887Z,1513254818.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:39.025Z,1513254819.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:39.822Z,1513254819.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:40.618Z,1513254820.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:41.026Z,1513254821.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:41.822Z,1513254821.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:42.398Z,1513254822.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:42.448Z,1513254822.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:42.571Z,1513254822.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:42.603Z,1513254822.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:42.642Z,1513254822.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:42.937Z,1513254822.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:42.952Z,1513254822.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:43.045Z,1513254823.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:43.325Z,1513254823.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:43.340Z,1513254823.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:43.720Z,1513254823.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:43.779Z,1513254823.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:43.842Z,1513254823.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:44.122Z,1513254824.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:44.149Z,1513254824.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:44.532Z,1513254824.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:44.579Z,1513254824.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:44.637Z,1513254824.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:44.930Z,1513254824.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:44.944Z,1513254824.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:45.041Z,1513254825.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:45.329Z,1513254825.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:45.344Z,1513254825.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:45.722Z,1513254825.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:45.751Z,1513254825.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:45.838Z,1513254825.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:46.125Z,1513254826.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:46.148Z,1513254826.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:46.515Z,1513254826.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:46.550Z,1513254826.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:46.633Z,1513254826.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:46.929Z,1513254826.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:46.967Z,1513254826.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:47.038Z,1513254827.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:47.334Z,1513254827.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:47.355Z,1513254827.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:47.749Z,1513254827.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:47.798Z,1513254827.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:47.834Z,1513254827.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:48.134Z,1513254828.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:48.159Z,1513254828.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:48.520Z,1513254828.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:48.556Z,1513254828.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:48.630Z,1513254828.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:48.923Z,1513254828.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:48.938Z,1513254828.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:49.033Z,1513254829.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:49.318Z,1513254829.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:49.337Z,1513254829.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:49.723Z,1513254829.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:49.743Z,1513254829.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:49.830Z,1513254829.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:50.120Z,1513254830.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:50.135Z,1513254830.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:50.527Z,1513254830.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:50.543Z,1513254830.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:50.626Z,1513254830.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:50.971Z,1513254830.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:50.995Z,1513254830.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:51.030Z,1513254831.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:51.325Z,1513254831.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:51.343Z,1513254831.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:51.717Z,1513254831.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:51.731Z,1513254831.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:51.826Z,1513254831.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:52.124Z,1513254832.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:52.139Z,1513254832.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:52.525Z,1513254832.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:52.539Z,1513254832.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:52.621Z,1513254832.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:52.915Z,1513254832.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:52.981Z,1513254832.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:53.029Z,1513254833.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:53.329Z,1513254833.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:53.356Z,1513254833.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:53.729Z,1513254833.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:53.755Z,1513254833.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:53.826Z,1513254833.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:54.154Z,1513254834.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:54.175Z,1513254834.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:54.531Z,1513254834.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:54.622Z,1513254834.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:54.635Z,1513254834.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:54.924Z,1513254834.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:54.939Z,1513254834.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:55.029Z,1513254835.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:55.312Z,1513254835.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:55.336Z,1513254835.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:55.725Z,1513254835.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:55.740Z,1513254835.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:55.826Z,1513254835.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:56.124Z,1513254836.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:56.139Z,1513254836.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:56.526Z,1513254836.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:56.541Z,1513254836.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:56.621Z,1513254836.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:56.937Z,1513254836.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:56.952Z,1513254836.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:57.026Z,1513254837.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:57.375Z,1513254837.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:57.429Z,1513254837.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:57.723Z,1513254837.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:57.743Z,1513254837.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:57.822Z,1513254837.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:58.123Z,1513254838.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:58.138Z,1513254838.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:58.525Z,1513254838.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:58.539Z,1513254838.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:58.619Z,1513254838.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:58.932Z,1513254838.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:58.966Z,1513254838.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:59.029Z,1513254839.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:59.334Z,1513254839.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:59.349Z,1513254839.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:59.736Z,1513254839.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:33:59.752Z,1513254839.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:33:59.826Z,1513254839.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:00.134Z,1513254840.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:00.155Z,1513254840.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:00.532Z,1513254840.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:00.568Z,1513254840.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:00.625Z,1513254840.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:00.916Z,1513254840.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:00.953Z,1513254840.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:01.029Z,1513254841.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:01.316Z,1513254841.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:01.348Z,1513254841.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:01.717Z,1513254841.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:01.751Z,1513254841.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:01.826Z,1513254841.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:02.114Z,1513254842.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:02.146Z,1513254842.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:02.526Z,1513254842.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:02.552Z,1513254842.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:02.621Z,1513254842.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:02.942Z,1513254842.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:02.963Z,1513254842.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:03.025Z,1513254843.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:03.325Z,1513254843.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:03.392Z,1513254843.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:03.716Z,1513254843.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:03.783Z,1513254843.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:03.822Z,1513254843.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:04.132Z,1513254844.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:04.163Z,1513254844.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:04.524Z,1513254844.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:04.540Z,1513254844.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:04.617Z,1513254844.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:04.918Z,1513254844.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:04.971Z,1513254844.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:05.023Z,1513254845.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:05.331Z,1513254845.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:05.352Z,1513254845.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:05.733Z,1513254845.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:05.748Z,1513254845.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:05.817Z,1513254845.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:06.133Z,1513254846.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:06.183Z,1513254846.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:06.527Z,1513254846.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:06.542Z,1513254846.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:06.615Z,1513254846.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:06.926Z,1513254846.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:06.993Z,1513254846.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:07.033Z,1513254847.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:07.320Z,1513254847.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:07.336Z,1513254847.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:07.723Z,1513254847.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:07.738Z,1513254847.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:07.830Z,1513254847.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:08.120Z,1513254848.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:08.135Z,1513254848.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:08.531Z,1513254848.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:08.626Z,1513254848.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:08.632Z,1513254848.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:08.937Z,1513254848.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:08.952Z,1513254848.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:09.029Z,1513254849.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:09.333Z,1513254849.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:09.352Z,1513254849.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:09.718Z,1513254849.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:09.741Z,1513254849.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:09.826Z,1513254849.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:10.134Z,1513254850.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:10.174Z,1513254850.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:10.530Z,1513254850.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:10.551Z,1513254850.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:10.621Z,1513254850.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:10.927Z,1513254850.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:10.942Z,1513254850.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:11.026Z,1513254851.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:11.331Z,1513254851.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:11.351Z,1513254851.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:11.733Z,1513254851.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:11.748Z,1513254851.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:11.821Z,1513254851.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:12.130Z,1513254852.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:12.153Z,1513254852.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:12.525Z,1513254852.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:12.540Z,1513254852.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:12.617Z,1513254852.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:12.932Z,1513254852.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:12.946Z,1513254852.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:13.022Z,1513254853.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:13.308Z,1513254853.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:13.336Z,1513254853.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:13.715Z,1513254853.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:13.742Z,1513254853.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:13.819Z,1513254853.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:14.114Z,1513254854.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:14.140Z,1513254854.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:14.535Z,1513254854.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:14.550Z,1513254854.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:14.613Z,1513254854.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:14.942Z,1513254854.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:14.957Z,1513254854.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:15.017Z,1513254855.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:15.340Z,1513254855.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:15.388Z,1513254855.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:15.732Z,1513254855.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:15.760Z,1513254855.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:15.814Z,1513254855.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:16.120Z,1513254856.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:16.146Z,1513254856.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:16.563Z,1513254856.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:16.604Z,1513254856.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:16.611Z,1513254856.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:16.916Z,1513254856.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:16.950Z,1513254856.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:17.017Z,1513254857.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:17.330Z,1513254857.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:17.355Z,1513254857.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:17.740Z,1513254857.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:17.755Z,1513254857.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:17.814Z,1513254857.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:18.126Z,1513254858.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:18.163Z,1513254858.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:18.520Z,1513254858.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:18.535Z,1513254858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:18.609Z,1513254858.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:18.920Z,1513254858.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:18.936Z,1513254858.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:19.013Z,1513254859.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:19.315Z,1513254859.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:19.330Z,1513254859.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:19.752Z,1513254859.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:19.785Z,1513254859.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:19.812Z,1513254859.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:20.124Z,1513254860.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:20.143Z,1513254860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:20.525Z,1513254860.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:20.540Z,1513254860.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:20.611Z,1513254860.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:20.932Z,1513254860.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:20.960Z,1513254860.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:21.037Z,1513254861.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:21.340Z,1513254861.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:21.354Z,1513254861.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:21.719Z,1513254861.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:21.743Z,1513254861.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:21.834Z,1513254861.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:22.114Z,1513254862.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:22.147Z,1513254862.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:22.515Z,1513254862.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:22.542Z,1513254862.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:22.630Z,1513254862.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:22.943Z,1513254862.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:22.976Z,1513254862.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:23.033Z,1513254863.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:23.337Z,1513254863.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:23.367Z,1513254863.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:23.734Z,1513254863.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:23.765Z,1513254863.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:23.829Z,1513254863.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:24.127Z,1513254864.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:24.147Z,1513254864.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:24.524Z,1513254864.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:24.543Z,1513254864.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:24.625Z,1513254864.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:24.919Z,1513254864.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:24.946Z,1513254864.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:25.029Z,1513254865.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:25.325Z,1513254865.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:25.340Z,1513254865.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:25.724Z,1513254865.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:25.738Z,1513254865.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:25.827Z,1513254865.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:26.155Z,1513254866.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:26.204Z,1513254866.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:26.538Z,1513254866.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:26.561Z,1513254866.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:26.622Z,1513254866.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:26.930Z,1513254866.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:26.964Z,1513254866.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:27.025Z,1513254867.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:27.338Z,1513254867.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:27.371Z,1513254867.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:27.724Z,1513254867.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:27.790Z,1513254867.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:27.822Z,1513254867.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:28.128Z,1513254868.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:28.143Z,1513254868.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:28.523Z,1513254868.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:28.580Z,1513254868.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:28.617Z,1513254868.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:28.919Z,1513254868.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:28.940Z,1513254868.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:29.022Z,1513254869.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:29.334Z,1513254869.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:29.375Z,1513254869.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:29.738Z,1513254869.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:29.759Z,1513254869.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:29.841Z,1513254869.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:30.126Z,1513254870.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:30.157Z,1513254870.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:30.514Z,1513254870.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:30.550Z,1513254870.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:30.637Z,1513254870.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:30.915Z,1513254870.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:30.947Z,1513254870.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:31.041Z,1513254871.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:31.318Z,1513254871.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:31.350Z,1513254871.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:31.723Z,1513254871.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:31.748Z,1513254871.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:31.837Z,1513254871.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:32.119Z,1513254872.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:32.151Z,1513254872.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:32.525Z,1513254872.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:32.595Z,1513254872.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:32.634Z,1513254872.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:32.951Z,1513254872.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:32.971Z,1513254872.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:33.037Z,1513254873.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:33.328Z,1513254873.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:33.351Z,1513254873.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:33.721Z,1513254873.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:33.752Z,1513254873.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:33.835Z,1513254873.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:34.120Z,1513254874.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:34.147Z,1513254874.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:34.518Z,1513254874.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:34.532Z,1513254874.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:34.629Z,1513254874.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:34.923Z,1513254874.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:34.939Z,1513254874.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:35.033Z,1513254875.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:35.329Z,1513254875.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:35.344Z,1513254875.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:35.754Z,1513254875.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:35.785Z,1513254875.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:35.830Z,1513254875.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:36.126Z,1513254876.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:36.140Z,1513254876.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:36.523Z,1513254876.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:36.537Z,1513254876.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:36.626Z,1513254876.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:36.951Z,1513254876.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:36.971Z,1513254876.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:37.033Z,1513254877.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:37.314Z,1513254877.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:37.352Z,1513254877.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:37.715Z,1513254877.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:37.764Z,1513254877.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:37.831Z,1513254877.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:38.119Z,1513254878.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:38.152Z,1513254878.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:38.155Z,1513254878.155 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:34:38.155Z,1513254878.155 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:34:38.155Z,1513254878.155 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:34:38.155Z,1513254878.155 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:34:38.538Z,1513254878.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:38.570Z,1513254878.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:38.573Z,1513254878.573 [Default:CheckIn:D] Stopped
2017-12-14T12:34:38.573Z,1513254878.573 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:34:38.626Z,1513254878.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:38.949Z,1513254878.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:38.984Z,1513254878.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:38.996Z,1513254878.996 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 721.386393 min 
2017-12-14T12:34:38.996Z,1513254878.996 [Default:CheckIn:E] Stopped
2017-12-14T12:34:38.996Z,1513254878.996 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:34:38.996Z,1513254878.996 [Default:CheckIn] Stopped
2017-12-14T12:34:38.996Z,1513254878.996 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:34:39.005Z,1513254879.005 [Default:CheckIn](INFO): Running loop #70
2017-12-14T12:34:39.005Z,1513254879.005 [Default:CheckIn] Running Loop=70
2017-12-14T12:34:39.005Z,1513254879.005 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:34:39.006Z,1513254879.006 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:34:39.029Z,1513254879.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:39.825Z,1513254879.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:40.621Z,1513254880.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:41.025Z,1513254881.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:41.823Z,1513254881.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:42.452Z,1513254882.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:42.487Z,1513254882.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:42.572Z,1513254882.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:42.611Z,1513254882.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:42.625Z,1513254882.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:42.949Z,1513254882.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:42.964Z,1513254882.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:43.029Z,1513254883.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:43.350Z,1513254883.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:43.365Z,1513254883.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:43.740Z,1513254883.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:43.764Z,1513254883.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:43.826Z,1513254883.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:44.152Z,1513254884.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:44.171Z,1513254884.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:44.550Z,1513254884.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:44.571Z,1513254884.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:44.621Z,1513254884.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:44.968Z,1513254884.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:44.983Z,1513254884.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:45.026Z,1513254885.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:45.353Z,1513254885.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:45.376Z,1513254885.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:45.747Z,1513254885.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:45.779Z,1513254885.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:45.822Z,1513254885.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:46.151Z,1513254886.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:46.181Z,1513254886.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:46.545Z,1513254886.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:46.560Z,1513254886.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:46.619Z,1513254886.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:46.939Z,1513254886.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:46.960Z,1513254886.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:47.029Z,1513254887.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:47.358Z,1513254887.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:47.385Z,1513254887.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:47.761Z,1513254887.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:47.784Z,1513254887.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:47.825Z,1513254887.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:48.172Z,1513254888.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:48.187Z,1513254888.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:48.547Z,1513254888.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:48.622Z,1513254888.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:48.715Z,1513254888.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:48.944Z,1513254888.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:48.983Z,1513254888.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:49.033Z,1513254889.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:49.347Z,1513254889.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:49.382Z,1513254889.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:49.748Z,1513254889.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:49.807Z,1513254889.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:49.830Z,1513254889.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:50.147Z,1513254890.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:50.162Z,1513254890.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:50.596Z,1513254890.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:50.625Z,1513254890.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:50.676Z,1513254890.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:50.962Z,1513254890.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:50.000Z,1513254891.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:51.029Z,1513254891.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:51.350Z,1513254891.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:51.402Z,1513254891.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:51.748Z,1513254891.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:51.764Z,1513254891.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:51.826Z,1513254891.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:52.147Z,1513254892.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:52.162Z,1513254892.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:52.539Z,1513254892.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:52.564Z,1513254892.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:52.621Z,1513254892.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:52.938Z,1513254892.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:52.972Z,1513254892.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:53.026Z,1513254893.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:53.363Z,1513254893.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:53.378Z,1513254893.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:53.770Z,1513254893.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:53.822Z,1513254893.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:53.838Z,1513254893.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:54.154Z,1513254894.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:54.179Z,1513254894.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:54.544Z,1513254894.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:54.558Z,1513254894.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:54.623Z,1513254894.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:54.966Z,1513254894.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:55.003Z,1513254895.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:55.029Z,1513254895.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:55.350Z,1513254895.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:55.371Z,1513254895.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:55.786Z,1513254895.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:55.814Z,1513254895.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:55.842Z,1513254895.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:56.150Z,1513254896.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:56.192Z,1513254896.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:56.554Z,1513254896.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:56.579Z,1513254896.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:56.637Z,1513254896.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:56.957Z,1513254896.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:56.972Z,1513254896.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:57.041Z,1513254897.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:57.360Z,1513254897.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:57.379Z,1513254897.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:57.752Z,1513254897.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:57.767Z,1513254897.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:57.839Z,1513254897.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:58.165Z,1513254898.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:58.230Z,1513254898.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:58.546Z,1513254898.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:58.580Z,1513254898.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:58.633Z,1513254898.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:58.947Z,1513254898.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:58.993Z,1513254898.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:59.037Z,1513254899.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:59.345Z,1513254899.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:59.360Z,1513254899.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:59.757Z,1513254899.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:34:59.825Z,1513254899.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:34:59.834Z,1513254899.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:00.158Z,1513254900.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:00.182Z,1513254900.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:00.550Z,1513254900.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:00.584Z,1513254900.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:00.630Z,1513254900.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:00.940Z,1513254900.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:00.997Z,1513254900.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:01.033Z,1513254901.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:01.343Z,1513254901.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:01.387Z,1513254901.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:01.746Z,1513254901.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:01.785Z,1513254901.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:01.830Z,1513254901.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:02.146Z,1513254902.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:02.161Z,1513254902.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:02.568Z,1513254902.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:02.626Z,1513254902.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:02.660Z,1513254902.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:02.965Z,1513254902.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:02.999Z,1513254902.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:03.041Z,1513254903.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:03.354Z,1513254903.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:03.369Z,1513254903.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:03.750Z,1513254903.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:03.766Z,1513254903.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:03.837Z,1513254903.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:04.142Z,1513254904.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:04.162Z,1513254904.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:04.634Z,1513254904.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:04.653Z,1513254904.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:04.713Z,1513254904.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:04.949Z,1513254904.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:04.983Z,1513254904.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:05.037Z,1513254905.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:05.362Z,1513254905.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:05.376Z,1513254905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:05.761Z,1513254905.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:05.776Z,1513254905.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:05.834Z,1513254905.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:06.160Z,1513254906.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:06.175Z,1513254906.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:06.539Z,1513254906.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:06.571Z,1513254906.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:06.630Z,1513254906.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:06.938Z,1513254906.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:06.973Z,1513254906.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:07.033Z,1513254907.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:07.343Z,1513254907.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:07.369Z,1513254907.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:07.744Z,1513254907.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:07.771Z,1513254907.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:07.831Z,1513254907.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:08.138Z,1513254908.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:08.175Z,1513254908.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:08.574Z,1513254908.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:08.596Z,1513254908.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:08.626Z,1513254908.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:08.967Z,1513254908.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:08.983Z,1513254908.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:09.029Z,1513254909.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:09.357Z,1513254909.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:09.383Z,1513254909.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:09.745Z,1513254909.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:09.760Z,1513254909.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:09.826Z,1513254909.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:10.145Z,1513254910.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:10.160Z,1513254910.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:10.540Z,1513254910.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:10.598Z,1513254910.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:10.623Z,1513254910.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:10.966Z,1513254910.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:11.006Z,1513254911.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:11.037Z,1513254911.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:11.353Z,1513254911.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:11.368Z,1513254911.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:11.757Z,1513254911.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:11.834Z,1513254911.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:11.853Z,1513254911.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:12.169Z,1513254912.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:12.184Z,1513254912.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:12.539Z,1513254912.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:12.575Z,1513254912.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:12.629Z,1513254912.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:12.960Z,1513254912.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:13.018Z,1513254913.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:13.033Z,1513254913.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:13.339Z,1513254913.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:13.364Z,1513254913.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:13.739Z,1513254913.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:13.809Z,1513254913.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:13.830Z,1513254913.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:14.170Z,1513254914.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:14.234Z,1513254914.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:14.565Z,1513254914.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:14.590Z,1513254914.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:14.626Z,1513254914.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:14.965Z,1513254914.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:14.000Z,1513254915.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:15.029Z,1513254915.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:15.355Z,1513254915.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:15.369Z,1513254915.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:15.748Z,1513254915.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:15.763Z,1513254915.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:15.826Z,1513254915.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:16.147Z,1513254916.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:16.167Z,1513254916.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:16.548Z,1513254916.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:16.622Z,1513254916.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:16.627Z,1513254916.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:16.970Z,1513254916.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:17.012Z,1513254917.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:17.033Z,1513254917.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:17.358Z,1513254917.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:17.381Z,1513254917.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:17.754Z,1513254917.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:17.768Z,1513254917.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:17.829Z,1513254917.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:18.153Z,1513254918.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:18.176Z,1513254918.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:18.551Z,1513254918.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:18.626Z,1513254918.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:18.655Z,1513254918.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:18.951Z,1513254918.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:18.965Z,1513254918.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:19.033Z,1513254919.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:19.352Z,1513254919.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:19.367Z,1513254919.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:19.744Z,1513254919.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:19.767Z,1513254919.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:19.830Z,1513254919.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:20.146Z,1513254920.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:20.167Z,1513254920.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:20.574Z,1513254920.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:20.604Z,1513254920.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:20.625Z,1513254920.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:20.974Z,1513254920.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:20.990Z,1513254920.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:21.029Z,1513254921.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:21.353Z,1513254921.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:21.386Z,1513254921.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:21.747Z,1513254921.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:21.783Z,1513254921.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:21.827Z,1513254921.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:22.146Z,1513254922.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:22.193Z,1513254922.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:22.539Z,1513254922.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:22.554Z,1513254922.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:22.621Z,1513254922.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:22.955Z,1513254922.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:22.994Z,1513254922.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:23.025Z,1513254923.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:23.357Z,1513254923.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:23.382Z,1513254923.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:23.785Z,1513254923.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:23.822Z,1513254923.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:23.846Z,1513254923.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:24.158Z,1513254924.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:24.184Z,1513254924.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:24.543Z,1513254924.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:24.566Z,1513254924.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:24.617Z,1513254924.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:24.954Z,1513254924.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:24.968Z,1513254924.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:25.022Z,1513254925.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:25.351Z,1513254925.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:25.366Z,1513254925.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:25.743Z,1513254925.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:25.764Z,1513254925.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:25.818Z,1513254925.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:26.147Z,1513254926.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:26.161Z,1513254926.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:26.553Z,1513254926.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:26.592Z,1513254926.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:26.613Z,1513254926.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:26.976Z,1513254926.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:27.004Z,1513254927.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:27.018Z,1513254927.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:27.362Z,1513254927.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:27.386Z,1513254927.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:27.747Z,1513254927.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:27.796Z,1513254927.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:27.814Z,1513254927.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:28.143Z,1513254928.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:28.158Z,1513254928.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:28.555Z,1513254928.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:28.590Z,1513254928.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:28.610Z,1513254928.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:28.946Z,1513254928.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:28.960Z,1513254928.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:29.017Z,1513254929.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:29.354Z,1513254929.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:29.369Z,1513254929.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:29.762Z,1513254929.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:29.797Z,1513254929.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:29.814Z,1513254929.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:30.184Z,1513254930.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:30.203Z,1513254930.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:30.554Z,1513254930.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:30.610Z,1513254930.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:30.643Z,1513254930.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:30.938Z,1513254930.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:30.983Z,1513254930.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:31.025Z,1513254931.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:31.353Z,1513254931.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:31.368Z,1513254931.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:31.749Z,1513254931.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:31.779Z,1513254931.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:31.822Z,1513254931.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:32.142Z,1513254932.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:32.169Z,1513254932.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:32.595Z,1513254932.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:32.618Z,1513254932.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:32.650Z,1513254932.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:32.971Z,1513254932.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:33.003Z,1513254933.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:33.026Z,1513254933.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:33.389Z,1513254933.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:33.430Z,1513254933.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:33.755Z,1513254933.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:33.770Z,1513254933.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:33.822Z,1513254933.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:34.147Z,1513254934.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:34.293Z,1513254934.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:34.539Z,1513254934.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:34.577Z,1513254934.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:34.619Z,1513254934.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:34.943Z,1513254934.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:35.016Z,1513254935.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:35.029Z,1513254935.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:35.351Z,1513254935.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:35.388Z,1513254935.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:35.763Z,1513254935.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:35.803Z,1513254935.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:35.826Z,1513254935.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:36.166Z,1513254936.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:36.181Z,1513254936.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:36.578Z,1513254936.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:36.606Z,1513254936.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:36.622Z,1513254936.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:36.948Z,1513254936.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:36.964Z,1513254936.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:37.025Z,1513254937.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:37.342Z,1513254937.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:37.400Z,1513254937.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:37.750Z,1513254937.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:37.765Z,1513254937.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:37.824Z,1513254937.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:38.147Z,1513254938.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:38.161Z,1513254938.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:38.559Z,1513254938.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:38.574Z,1513254938.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:38.618Z,1513254938.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:38.958Z,1513254938.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:38.982Z,1513254938.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:39.021Z,1513254939.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:39.818Z,1513254939.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:40.613Z,1513254940.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:41.019Z,1513254941.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:41.814Z,1513254941.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:42.437Z,1513254942.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:42.469Z,1513254942.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:42.563Z,1513254942.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:42.599Z,1513254942.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:42.609Z,1513254942.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:42.928Z,1513254942.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:42.943Z,1513254942.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:43.015Z,1513254943.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:43.323Z,1513254943.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:43.350Z,1513254943.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:43.720Z,1513254943.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:43.747Z,1513254943.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:43.810Z,1513254943.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:44.113Z,1513254944.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:44.160Z,1513254944.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:44.538Z,1513254944.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:44.608Z,1513254944.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:44.620Z,1513254944.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:44.942Z,1513254944.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:44.957Z,1513254944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:45.025Z,1513254945.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:45.343Z,1513254945.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:45.358Z,1513254945.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:45.720Z,1513254945.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:45.758Z,1513254945.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:45.825Z,1513254945.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:46.130Z,1513254946.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:46.179Z,1513254946.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:46.526Z,1513254946.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:46.540Z,1513254946.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:46.622Z,1513254946.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:46.922Z,1513254946.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:46.950Z,1513254946.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:47.025Z,1513254947.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:47.342Z,1513254947.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:47.357Z,1513254947.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:47.737Z,1513254947.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:47.751Z,1513254947.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:47.822Z,1513254947.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:48.134Z,1513254948.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:48.149Z,1513254948.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:48.523Z,1513254948.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:48.539Z,1513254948.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:48.617Z,1513254948.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:48.918Z,1513254948.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:48.949Z,1513254948.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:49.023Z,1513254949.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:49.344Z,1513254949.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:49.391Z,1513254949.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:49.736Z,1513254949.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:49.752Z,1513254949.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:49.818Z,1513254949.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:50.136Z,1513254950.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:50.151Z,1513254950.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:50.525Z,1513254950.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:50.540Z,1513254950.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:50.613Z,1513254950.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:50.929Z,1513254950.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:50.944Z,1513254950.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:51.021Z,1513254951.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:51.338Z,1513254951.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:51.368Z,1513254951.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:51.725Z,1513254951.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:51.739Z,1513254951.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:51.818Z,1513254951.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:52.119Z,1513254952.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:52.146Z,1513254952.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:52.569Z,1513254952.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:52.614Z,1513254952.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:52.643Z,1513254952.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:52.923Z,1513254952.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:52.938Z,1513254952.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:53.017Z,1513254953.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:53.333Z,1513254953.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:53.348Z,1513254953.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:53.737Z,1513254953.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:53.751Z,1513254953.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:53.815Z,1513254953.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:54.134Z,1513254954.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:54.149Z,1513254954.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:54.523Z,1513254954.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:54.539Z,1513254954.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:54.609Z,1513254954.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:54.919Z,1513254954.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:54.940Z,1513254954.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:55.013Z,1513254955.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:55.324Z,1513254955.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:55.343Z,1513254955.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:55.725Z,1513254955.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:55.812Z,1513254955.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:55.847Z,1513254955.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:56.120Z,1513254956.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:56.150Z,1513254956.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:56.526Z,1513254956.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:56.561Z,1513254956.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:56.609Z,1513254956.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:56.940Z,1513254956.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:56.991Z,1513254956.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:57.013Z,1513254957.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:57.325Z,1513254957.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:57.363Z,1513254957.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:57.712Z,1513254957.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:57.763Z,1513254957.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:57.810Z,1513254957.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:58.115Z,1513254958.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:58.142Z,1513254958.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:58.518Z,1513254958.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:58.532Z,1513254958.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:58.607Z,1513254958.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:58.924Z,1513254958.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:58.938Z,1513254958.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:59.025Z,1513254959.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:59.345Z,1513254959.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:59.360Z,1513254959.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:59.737Z,1513254959.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:35:59.753Z,1513254959.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:35:59.823Z,1513254959.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:00.134Z,1513254960.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:00.148Z,1513254960.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:00.519Z,1513254960.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:00.544Z,1513254960.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:00.618Z,1513254960.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:00.927Z,1513254960.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:00.962Z,1513254960.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:01.029Z,1513254961.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:01.315Z,1513254961.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:01.350Z,1513254961.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:01.720Z,1513254961.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:01.744Z,1513254961.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:01.826Z,1513254961.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:02.156Z,1513254962.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:02.187Z,1513254962.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:02.532Z,1513254962.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:02.551Z,1513254962.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:02.622Z,1513254962.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:02.933Z,1513254962.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:02.955Z,1513254962.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:03.025Z,1513254963.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:03.338Z,1513254963.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:03.353Z,1513254963.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:03.729Z,1513254963.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:03.743Z,1513254963.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:03.822Z,1513254963.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:04.127Z,1513254964.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:04.142Z,1513254964.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:04.522Z,1513254964.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:04.554Z,1513254964.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:04.617Z,1513254964.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:04.926Z,1513254964.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:04.940Z,1513254964.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:05.022Z,1513254965.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:05.334Z,1513254965.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:05.365Z,1513254965.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:05.738Z,1513254965.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:05.768Z,1513254965.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:05.817Z,1513254965.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:06.134Z,1513254966.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:06.302Z,1513254966.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:06.525Z,1513254966.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:06.544Z,1513254966.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:06.613Z,1513254966.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:06.922Z,1513254966.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:06.947Z,1513254966.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:07.022Z,1513254967.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:07.326Z,1513254967.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:07.344Z,1513254967.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:07.726Z,1513254967.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:07.741Z,1513254967.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:07.818Z,1513254967.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:08.122Z,1513254968.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:08.141Z,1513254968.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:08.526Z,1513254968.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:08.541Z,1513254968.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:08.615Z,1513254968.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:08.931Z,1513254968.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:08.946Z,1513254968.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:09.017Z,1513254969.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:09.334Z,1513254969.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:09.350Z,1513254969.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:09.724Z,1513254969.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:09.747Z,1513254969.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:09.813Z,1513254969.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:10.109Z,1513254970.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:10.137Z,1513254970.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:10.531Z,1513254970.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:10.546Z,1513254970.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:10.612Z,1513254970.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:10.919Z,1513254970.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:10.953Z,1513254970.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:11.017Z,1513254971.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:11.330Z,1513254971.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:11.346Z,1513254971.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:11.735Z,1513254971.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:11.751Z,1513254971.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:11.815Z,1513254971.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:12.134Z,1513254972.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:12.149Z,1513254972.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:12.523Z,1513254972.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:12.611Z,1513254972.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:12.690Z,1513254972.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:12.936Z,1513254972.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:12.952Z,1513254972.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:13.026Z,1513254973.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:13.325Z,1513254973.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:13.341Z,1513254973.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:13.721Z,1513254973.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:13.738Z,1513254973.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:13.822Z,1513254973.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:14.118Z,1513254974.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:14.142Z,1513254974.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:14.531Z,1513254974.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:14.619Z,1513254974.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:14.623Z,1513254974.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:14.938Z,1513254974.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:14.952Z,1513254974.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:15.033Z,1513254975.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:15.347Z,1513254975.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:15.367Z,1513254975.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:15.714Z,1513254975.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:15.746Z,1513254975.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:15.832Z,1513254975.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:16.115Z,1513254976.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:16.147Z,1513254976.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:16.515Z,1513254976.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:16.531Z,1513254976.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:16.626Z,1513254976.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:16.920Z,1513254976.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:16.974Z,1513254976.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:17.029Z,1513254977.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:17.326Z,1513254977.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:17.341Z,1513254977.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:17.729Z,1513254977.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:17.751Z,1513254977.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:17.826Z,1513254977.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:18.133Z,1513254978.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:18.194Z,1513254978.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:18.517Z,1513254978.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:18.561Z,1513254978.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:18.622Z,1513254978.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:18.916Z,1513254978.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:18.960Z,1513254978.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:19.025Z,1513254979.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:19.331Z,1513254979.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:19.380Z,1513254979.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:19.717Z,1513254979.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:19.758Z,1513254979.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:19.826Z,1513254979.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:20.125Z,1513254980.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:20.228Z,1513254980.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:20.565Z,1513254980.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:20.622Z,1513254980.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:20.626Z,1513254980.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:20.965Z,1513254980.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:20.984Z,1513254980.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:21.026Z,1513254981.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:21.334Z,1513254981.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:21.359Z,1513254981.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:21.716Z,1513254981.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:21.759Z,1513254981.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:21.822Z,1513254981.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:22.115Z,1513254982.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:22.134Z,1513254982.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:22.527Z,1513254982.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:22.559Z,1513254982.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:22.619Z,1513254982.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:22.931Z,1513254982.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:22.994Z,1513254982.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:23.029Z,1513254983.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:23.328Z,1513254983.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:23.363Z,1513254983.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:23.747Z,1513254983.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:23.775Z,1513254983.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:23.826Z,1513254983.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:24.144Z,1513254984.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:24.208Z,1513254984.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:24.531Z,1513254984.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:24.551Z,1513254984.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:24.622Z,1513254984.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:24.917Z,1513254984.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:24.969Z,1513254984.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:25.026Z,1513254985.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:25.322Z,1513254985.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:25.389Z,1513254985.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:25.725Z,1513254985.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:25.769Z,1513254985.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:25.824Z,1513254985.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:26.139Z,1513254986.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:26.170Z,1513254986.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:26.534Z,1513254986.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:26.589Z,1513254986.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:26.622Z,1513254986.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:26.937Z,1513254986.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:27.002Z,1513254987.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:27.045Z,1513254987.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:27.349Z,1513254987.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:27.363Z,1513254987.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:27.719Z,1513254987.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:27.752Z,1513254987.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:27.842Z,1513254987.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:28.115Z,1513254988.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:28.164Z,1513254988.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:28.515Z,1513254988.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:28.638Z,1513254988.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:28.643Z,1513254988.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:28.927Z,1513254988.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:28.972Z,1513254988.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:29.041Z,1513254989.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:29.326Z,1513254989.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:29.341Z,1513254989.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:29.748Z,1513254989.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:29.774Z,1513254989.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:29.838Z,1513254989.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:30.129Z,1513254990.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:30.144Z,1513254990.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:30.517Z,1513254990.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:30.553Z,1513254990.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:30.634Z,1513254990.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:30.926Z,1513254990.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:30.952Z,1513254990.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:31.038Z,1513254991.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:31.316Z,1513254991.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:31.364Z,1513254991.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:31.717Z,1513254991.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:31.764Z,1513254991.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:31.834Z,1513254991.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:32.165Z,1513254992.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:32.279Z,1513254992.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:32.531Z,1513254992.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:32.630Z,1513254992.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:32.662Z,1513254992.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:32.662Z,1513254992.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 241
2017-12-14T12:36:32.662Z,1513254992.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:36:32.664Z,1513254992.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:32.664Z,1513254992.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 241
2017-12-14T12:36:32.664Z,1513254992.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:36:32.682Z,1513254992.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:32.682Z,1513254992.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 241
2017-12-14T12:36:32.682Z,1513254992.682 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:36:32.739Z,1513254992.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:36:32.739Z,1513254992.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:36:32.740Z,1513254992.740 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:36:32.931Z,1513254992.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:32.990Z,1513254992.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:36:32.990Z,1513254992.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 241
2017-12-14T12:36:32.991Z,1513254992.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:36:32.991Z,1513254992.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 241
2017-12-14T12:36:32.991Z,1513254992.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:36:32.991Z,1513254992.991 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 241
2017-12-14T12:36:33.034Z,1513254993.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:33.329Z,1513254993.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:33.347Z,1513254993.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:36:33.347Z,1513254993.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:36:33.348Z,1513254993.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:36:33.348Z,1513254993.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:36:33.369Z,1513254993.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:36:33.369Z,1513254993.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:36:33.369Z,1513254993.369 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:36:33.370Z,1513254993.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:36:33.370Z,1513254993.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:36:33.722Z,1513254993.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:33.759Z,1513254993.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:33.830Z,1513254993.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:34.120Z,1513254994.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:34.168Z,1513254994.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:34.525Z,1513254994.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:34.548Z,1513254994.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:34.625Z,1513254994.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:34.927Z,1513254994.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:34.951Z,1513254994.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:35.029Z,1513254995.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:35.336Z,1513254995.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:35.356Z,1513254995.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:35.752Z,1513254995.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:35.799Z,1513254995.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:35.834Z,1513254995.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:36.127Z,1513254996.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:36.196Z,1513254996.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:36.521Z,1513254996.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:36.570Z,1513254996.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:36.630Z,1513254996.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:36.929Z,1513254996.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:36.968Z,1513254996.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:37.033Z,1513254997.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:37.339Z,1513254997.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:37.386Z,1513254997.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:37.725Z,1513254997.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:37.751Z,1513254997.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:37.830Z,1513254997.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:38.121Z,1513254998.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:38.171Z,1513254998.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:38.535Z,1513254998.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:38.584Z,1513254998.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:38.625Z,1513254998.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:38.938Z,1513254998.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:38.963Z,1513254998.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:39.029Z,1513254999.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:39.336Z,1513254999.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:39.431Z,1513254999.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:39.826Z,1513254999.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:40.622Z,1513255000.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:41.025Z,1513255001.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:41.824Z,1513255001.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:42.618Z,1513255002.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:43.022Z,1513255003.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:43.818Z,1513255003.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:44.614Z,1513255004.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:45.019Z,1513255005.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:45.814Z,1513255005.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:46.047Z,1513255006.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:46.064Z,1513255006.064 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:36:46.064Z,1513255006.064 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:36:46.064Z,1513255006.064 [BPC1](ERROR): Communications Fault
2017-12-14T12:36:46.112Z,1513255006.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:46.164Z,1513255006.164 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:36:46.294Z,1513255006.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:46.366Z,1513255006.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:46.610Z,1513255006.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:46.638Z,1513255006.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:46.679Z,1513255006.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:47.014Z,1513255007.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:47.035Z,1513255007.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:47.080Z,1513255007.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:47.123Z,1513255007.123 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:36:47.124Z,1513255007.124 [BPC1] No Fault, FailCount= 1
2017-12-14T12:36:47.426Z,1513255007.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:47.523Z,1513255007.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:47.814Z,1513255007.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:47.815Z,1513255007.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:47.834Z,1513255007.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:48.228Z,1513255008.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:48.321Z,1513255008.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:48.611Z,1513255008.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:48.615Z,1513255008.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:48.646Z,1513255008.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:49.018Z,1513255009.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:49.021Z,1513255009.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:49.055Z,1513255009.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:49.422Z,1513255009.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:49.500Z,1513255009.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:49.825Z,1513255009.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:49.841Z,1513255009.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:49.852Z,1513255009.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:50.261Z,1513255010.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:50.311Z,1513255010.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:50.622Z,1513255010.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:50.637Z,1513255010.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:50.644Z,1513255010.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:51.008Z,1513255011.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:51.029Z,1513255011.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:51.041Z,1513255011.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:51.413Z,1513255011.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:51.435Z,1513255011.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:51.821Z,1513255011.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:51.835Z,1513255011.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:51.838Z,1513255011.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:52.204Z,1513255012.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:52.237Z,1513255012.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:52.621Z,1513255012.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:52.634Z,1513255012.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:52.667Z,1513255012.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:53.029Z,1513255013.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:53.037Z,1513255013.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:53.051Z,1513255013.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:53.408Z,1513255013.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:53.443Z,1513255013.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:53.807Z,1513255013.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:53.834Z,1513255013.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:53.834Z,1513255013.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:54.205Z,1513255014.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:54.252Z,1513255014.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:54.629Z,1513255014.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:54.657Z,1513255014.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:54.698Z,1513255014.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:55.000Z,1513255015.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:55.034Z,1513255015.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:55.037Z,1513255015.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:55.382Z,1513255015.382 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:36:55.382Z,1513255015.382 [NAL9602] Data Fault, FailCount= 1
2017-12-14T12:36:55.382Z,1513255015.382 [NAL9602](ERROR): Data Fault
2017-12-14T12:36:55.406Z,1513255015.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:55.447Z,1513255015.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:55.485Z,1513255015.485 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:36:55.788Z,1513255015.788 [NAL9602](INFO): Powering down
2017-12-14T12:36:55.834Z,1513255015.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:55.850Z,1513255015.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:55.907Z,1513255015.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:56.207Z,1513255016.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:56.240Z,1513255016.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:56.630Z,1513255016.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:56.647Z,1513255016.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:56.683Z,1513255016.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:56.709Z,1513255016.709 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:36:56.709Z,1513255016.709 [NAL9602] No Fault, FailCount= 1
2017-12-14T12:36:57.004Z,1513255017.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:57.032Z,1513255017.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:57.033Z,1513255017.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:57.402Z,1513255017.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:57.429Z,1513255017.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:57.794Z,1513255017.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:57.830Z,1513255017.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:57.836Z,1513255017.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:58.197Z,1513255018.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:58.285Z,1513255018.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:58.607Z,1513255018.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:58.625Z,1513255018.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:58.637Z,1513255018.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:59.030Z,1513255019.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:59.033Z,1513255019.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:59.109Z,1513255019.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:59.406Z,1513255019.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:59.453Z,1513255019.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:36:59.808Z,1513255019.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:59.826Z,1513255019.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:36:59.828Z,1513255019.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:00.253Z,1513255020.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:00.306Z,1513255020.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:00.599Z,1513255020.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:00.622Z,1513255020.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:00.633Z,1513255020.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:01.010Z,1513255021.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:01.025Z,1513255021.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:01.044Z,1513255021.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:01.415Z,1513255021.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:01.421Z,1513255021.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x16210 got:0x40960
2017-12-14T12:37:01.439Z,1513255021.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:01.792Z,1513255021.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:01.822Z,1513255021.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:01.825Z,1513255021.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:02.276Z,1513255022.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:02.313Z,1513255022.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:02.608Z,1513255022.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:02.619Z,1513255022.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:02.635Z,1513255022.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:03.007Z,1513255023.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:03.025Z,1513255023.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:03.035Z,1513255023.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:03.406Z,1513255023.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:03.430Z,1513255023.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:03.815Z,1513255023.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:03.822Z,1513255023.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:03.839Z,1513255023.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:04.207Z,1513255024.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:04.288Z,1513255024.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:04.598Z,1513255024.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:04.617Z,1513255024.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:04.637Z,1513255024.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:05.018Z,1513255025.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:05.021Z,1513255025.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:05.042Z,1513255025.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:05.418Z,1513255025.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:05.432Z,1513255025.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:05.803Z,1513255025.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:05.819Z,1513255025.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:05.847Z,1513255025.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:06.215Z,1513255026.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:06.327Z,1513255026.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:06.607Z,1513255026.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:06.613Z,1513255026.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:06.637Z,1513255026.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:07.014Z,1513255027.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:07.017Z,1513255027.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:07.029Z,1513255027.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:07.408Z,1513255027.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:07.429Z,1513255027.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:07.815Z,1513255027.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:07.819Z,1513255027.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:07.834Z,1513255027.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:08.214Z,1513255028.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:08.263Z,1513255028.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:08.612Z,1513255028.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:08.696Z,1513255028.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:08.751Z,1513255028.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:08.998Z,1513255028.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:09.033Z,1513255029.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:09.067Z,1513255029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:09.402Z,1513255029.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:09.435Z,1513255029.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:09.806Z,1513255029.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:09.830Z,1513255029.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:09.855Z,1513255029.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:10.202Z,1513255030.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:10.229Z,1513255030.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:10.626Z,1513255030.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:10.649Z,1513255030.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:10.692Z,1513255030.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:11.002Z,1513255031.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:11.037Z,1513255031.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:11.047Z,1513255031.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:11.399Z,1513255031.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:11.418Z,1513255031.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:11.811Z,1513255031.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:11.834Z,1513255031.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:11.842Z,1513255031.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:12.205Z,1513255032.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:12.309Z,1513255032.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:12.592Z,1513255032.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:12.629Z,1513255032.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:12.641Z,1513255032.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:13.004Z,1513255033.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:13.030Z,1513255033.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:13.033Z,1513255033.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:13.403Z,1513255033.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:13.430Z,1513255033.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:13.802Z,1513255033.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:13.830Z,1513255033.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:13.844Z,1513255033.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:14.198Z,1513255034.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:14.292Z,1513255034.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:14.613Z,1513255034.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:14.620Z,1513255034.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T12:37:14.625Z,1513255034.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:14.667Z,1513255034.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:15.015Z,1513255035.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:15.029Z,1513255035.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:15.030Z,1513255035.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:15.425Z,1513255035.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:15.464Z,1513255035.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:15.809Z,1513255035.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:15.826Z,1513255035.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:15.829Z,1513255035.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:16.205Z,1513255036.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:16.304Z,1513255036.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:16.614Z,1513255036.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:16.621Z,1513255036.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:16.631Z,1513255036.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:17.021Z,1513255037.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:17.025Z,1513255037.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:17.062Z,1513255037.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:17.399Z,1513255037.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:17.439Z,1513255037.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:17.811Z,1513255037.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:17.818Z,1513255037.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x59051 got:0x16850
2017-12-14T12:37:17.822Z,1513255037.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:17.836Z,1513255037.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:18.238Z,1513255038.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:18.324Z,1513255038.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:18.621Z,1513255038.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:18.632Z,1513255038.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:18.653Z,1513255038.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:19.000Z,1513255039.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:19.029Z,1513255039.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:19.033Z,1513255039.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:19.406Z,1513255039.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:19.413Z,1513255039.413 [PNI_TCM](ERROR): CRC does not match. Expected:0x26159 got:0x320
2017-12-14T12:37:19.438Z,1513255039.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:19.819Z,1513255039.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:19.826Z,1513255039.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:19.836Z,1513255039.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:20.198Z,1513255040.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:20.232Z,1513255040.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:20.598Z,1513255040.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:20.621Z,1513255040.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:20.648Z,1513255040.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:21.008Z,1513255041.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:21.025Z,1513255041.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:21.039Z,1513255041.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:21.409Z,1513255041.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:21.436Z,1513255041.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:21.801Z,1513255041.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:21.824Z,1513255041.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:21.847Z,1513255041.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:22.198Z,1513255042.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:22.234Z,1513255042.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:22.617Z,1513255042.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:22.662Z,1513255042.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:22.744Z,1513255042.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:23.015Z,1513255043.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:23.042Z,1513255043.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:23.051Z,1513255043.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:23.406Z,1513255043.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:23.446Z,1513255043.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:23.808Z,1513255043.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:23.826Z,1513255043.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:23.838Z,1513255043.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:24.213Z,1513255044.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:24.228Z,1513255044.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:24.635Z,1513255044.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:24.653Z,1513255044.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:24.684Z,1513255044.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:25.010Z,1513255045.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:25.037Z,1513255045.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:25.057Z,1513255045.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:25.407Z,1513255045.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:25.424Z,1513255045.424 [PNI_TCM](ERROR): CRC does not match. Expected:0x57240 got:0x7490
2017-12-14T12:37:25.462Z,1513255045.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:25.817Z,1513255045.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:25.832Z,1513255045.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:25.834Z,1513255045.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:26.183Z,1513255046.183 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:37:26.250Z,1513255046.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:26.301Z,1513255046.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:26.608Z,1513255046.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:26.630Z,1513255046.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:26.662Z,1513255046.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:27.008Z,1513255047.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:27.020Z,1513255047.020 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T12:37:27.033Z,1513255047.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:27.048Z,1513255047.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:27.439Z,1513255047.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:27.454Z,1513255047.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:27.815Z,1513255047.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:27.830Z,1513255047.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:27.847Z,1513255047.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:28.206Z,1513255048.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:28.343Z,1513255048.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:28.599Z,1513255048.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:28.625Z,1513255048.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:28.654Z,1513255048.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:29.030Z,1513255049.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:29.033Z,1513255049.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:29.103Z,1513255049.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:29.414Z,1513255049.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:29.449Z,1513255049.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:29.805Z,1513255049.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:29.826Z,1513255049.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:29.844Z,1513255049.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:30.252Z,1513255050.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:30.340Z,1513255050.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:30.608Z,1513255050.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:30.622Z,1513255050.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:30.633Z,1513255050.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:31.009Z,1513255051.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:31.025Z,1513255051.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:31.055Z,1513255051.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:31.410Z,1513255051.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:31.434Z,1513255051.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:31.814Z,1513255051.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:31.822Z,1513255051.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:31.871Z,1513255051.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:32.256Z,1513255052.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:32.326Z,1513255052.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:32.611Z,1513255052.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:32.617Z,1513255052.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:32.642Z,1513255052.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:33.011Z,1513255053.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:33.023Z,1513255053.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:33.035Z,1513255053.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:33.412Z,1513255053.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:33.428Z,1513255053.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:33.816Z,1513255053.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:33.818Z,1513255053.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:33.846Z,1513255053.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:34.214Z,1513255054.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:34.228Z,1513255054.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:34.599Z,1513255054.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:34.614Z,1513255054.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:34.651Z,1513255054.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:34.999Z,1513255054.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:35.021Z,1513255055.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:35.041Z,1513255055.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:35.408Z,1513255055.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:35.439Z,1513255055.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:35.809Z,1513255055.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:35.818Z,1513255055.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:35.844Z,1513255055.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:36.199Z,1513255056.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:36.230Z,1513255056.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:36.615Z,1513255056.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:36.655Z,1513255056.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:36.691Z,1513255056.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:37.025Z,1513255057.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:37.030Z,1513255057.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:37.041Z,1513255057.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:37.383Z,1513255057.383 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:37:37.418Z,1513255057.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:37.434Z,1513255057.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:37.813Z,1513255057.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:37.826Z,1513255057.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:37.838Z,1513255057.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:38.223Z,1513255058.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:38.252Z,1513255058.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:38.622Z,1513255058.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:38.669Z,1513255058.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:38.708Z,1513255058.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:39.035Z,1513255059.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:39.045Z,1513255059.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:39.060Z,1513255059.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:39.399Z,1513255059.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:39.447Z,1513255059.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:39.842Z,1513255059.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:40.637Z,1513255060.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:41.041Z,1513255061.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:41.837Z,1513255061.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:42.633Z,1513255062.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:42.933Z,1513255062.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:42.986Z,1513255062.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:43.037Z,1513255063.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:43.074Z,1513255063.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:43.096Z,1513255063.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:43.453Z,1513255063.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:43.488Z,1513255063.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:43.833Z,1513255063.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:43.854Z,1513255063.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:43.882Z,1513255063.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:44.302Z,1513255064.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:44.342Z,1513255064.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:44.629Z,1513255064.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:44.657Z,1513255064.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:44.672Z,1513255064.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:45.033Z,1513255065.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:45.040Z,1513255065.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:45.130Z,1513255065.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:45.429Z,1513255065.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:45.463Z,1513255065.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:45.830Z,1513255065.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:45.840Z,1513255065.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:45.869Z,1513255065.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:46.301Z,1513255066.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:46.328Z,1513255066.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:46.626Z,1513255066.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:46.644Z,1513255066.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:46.683Z,1513255066.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:47.029Z,1513255067.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:47.062Z,1513255067.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:47.077Z,1513255067.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:47.459Z,1513255067.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:47.473Z,1513255067.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:47.826Z,1513255067.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:47.836Z,1513255067.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:47.851Z,1513255067.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:48.241Z,1513255068.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:48.335Z,1513255068.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:48.622Z,1513255068.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:48.647Z,1513255068.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:48.678Z,1513255068.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:49.026Z,1513255069.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:49.039Z,1513255069.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:49.068Z,1513255069.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:49.453Z,1513255069.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:49.468Z,1513255069.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:49.822Z,1513255069.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:49.861Z,1513255069.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:49.883Z,1513255069.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:50.250Z,1513255070.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:50.269Z,1513255070.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:50.619Z,1513255070.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:50.676Z,1513255070.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:50.707Z,1513255070.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:51.026Z,1513255071.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:51.035Z,1513255071.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:51.071Z,1513255071.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:51.451Z,1513255071.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:51.467Z,1513255071.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:51.821Z,1513255071.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:51.856Z,1513255071.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:51.879Z,1513255071.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:52.254Z,1513255072.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:52.275Z,1513255072.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:52.617Z,1513255072.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:52.671Z,1513255072.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:52.692Z,1513255072.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:53.024Z,1513255073.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:53.035Z,1513255073.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:53.071Z,1513255073.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:53.448Z,1513255073.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:53.473Z,1513255073.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:53.819Z,1513255073.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:53.860Z,1513255073.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:53.899Z,1513255073.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:54.306Z,1513255074.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:54.331Z,1513255074.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:54.613Z,1513255074.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:54.635Z,1513255074.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:54.715Z,1513255074.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:55.020Z,1513255075.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:55.037Z,1513255075.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:55.087Z,1513255075.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:55.447Z,1513255075.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:55.462Z,1513255075.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:55.814Z,1513255075.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:55.845Z,1513255075.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:55.883Z,1513255075.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:56.304Z,1513255076.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:56.332Z,1513255076.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:56.609Z,1513255076.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:56.660Z,1513255076.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:56.707Z,1513255076.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:57.014Z,1513255077.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:57.064Z,1513255077.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:57.083Z,1513255077.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:57.451Z,1513255077.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:57.466Z,1513255077.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:57.809Z,1513255077.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:57.866Z,1513255077.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:57.900Z,1513255077.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:58.293Z,1513255078.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:58.342Z,1513255078.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:58.605Z,1513255078.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:58.648Z,1513255078.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:58.671Z,1513255078.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:59.010Z,1513255079.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:59.046Z,1513255079.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:59.067Z,1513255079.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:59.446Z,1513255079.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:59.460Z,1513255079.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:37:59.806Z,1513255079.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:59.846Z,1513255079.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:37:59.877Z,1513255079.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:00.311Z,1513255080.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:00.330Z,1513255080.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:00.607Z,1513255080.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:00.637Z,1513255080.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:00.676Z,1513255080.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:01.021Z,1513255081.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:01.082Z,1513255081.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:01.125Z,1513255081.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:01.438Z,1513255081.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:01.468Z,1513255081.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:01.819Z,1513255081.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:01.843Z,1513255081.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:01.871Z,1513255081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:02.236Z,1513255082.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:02.355Z,1513255082.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:02.614Z,1513255082.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:02.651Z,1513255082.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:02.686Z,1513255082.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:03.017Z,1513255083.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:03.058Z,1513255083.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:03.081Z,1513255083.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:03.444Z,1513255083.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:03.463Z,1513255083.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:03.814Z,1513255083.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:03.843Z,1513255083.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:03.857Z,1513255083.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:04.284Z,1513255084.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:04.347Z,1513255084.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:04.611Z,1513255084.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:04.663Z,1513255084.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:04.697Z,1513255084.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:05.019Z,1513255085.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:05.044Z,1513255085.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:05.091Z,1513255085.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:05.453Z,1513255085.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:05.482Z,1513255085.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:05.813Z,1513255085.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:05.852Z,1513255085.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:05.867Z,1513255085.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:06.249Z,1513255086.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:06.263Z,1513255086.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:06.610Z,1513255086.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:06.667Z,1513255086.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:06.690Z,1513255086.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:07.017Z,1513255087.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:07.032Z,1513255087.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:07.065Z,1513255087.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:07.506Z,1513255087.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:07.567Z,1513255087.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:07.834Z,1513255087.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:07.862Z,1513255087.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:07.876Z,1513255087.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:08.310Z,1513255088.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:08.330Z,1513255088.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:08.629Z,1513255088.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:08.657Z,1513255088.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:08.678Z,1513255088.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:09.034Z,1513255089.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:09.037Z,1513255089.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:09.065Z,1513255089.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:09.431Z,1513255089.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:09.459Z,1513255089.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:09.830Z,1513255089.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:09.840Z,1513255089.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:09.867Z,1513255089.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:10.299Z,1513255090.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:10.326Z,1513255090.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:10.626Z,1513255090.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:10.648Z,1513255090.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:10.683Z,1513255090.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:11.029Z,1513255091.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:11.054Z,1513255091.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:11.080Z,1513255091.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:11.454Z,1513255091.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:11.474Z,1513255091.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:11.826Z,1513255091.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:11.837Z,1513255091.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:11.870Z,1513255091.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:12.293Z,1513255092.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:12.324Z,1513255092.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:12.621Z,1513255092.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:12.642Z,1513255092.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:12.671Z,1513255092.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:13.025Z,1513255093.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:13.051Z,1513255093.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:13.071Z,1513255093.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:13.449Z,1513255093.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:13.464Z,1513255093.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:13.822Z,1513255093.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:13.876Z,1513255093.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:13.916Z,1513255093.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:14.322Z,1513255094.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:14.355Z,1513255094.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:14.618Z,1513255094.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:14.659Z,1513255094.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:14.675Z,1513255094.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:15.025Z,1513255095.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:15.032Z,1513255095.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:15.068Z,1513255095.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:15.436Z,1513255095.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:15.463Z,1513255095.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:15.823Z,1513255095.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:15.834Z,1513255095.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:15.878Z,1513255095.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:16.236Z,1513255096.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:16.371Z,1513255096.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:16.617Z,1513255096.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:16.651Z,1513255096.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:16.708Z,1513255096.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:17.021Z,1513255097.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:17.064Z,1513255097.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:17.104Z,1513255097.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:17.442Z,1513255097.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:17.468Z,1513255097.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:17.819Z,1513255097.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:17.840Z,1513255097.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:17.887Z,1513255097.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:18.263Z,1513255098.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:18.294Z,1513255098.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:18.614Z,1513255098.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:18.651Z,1513255098.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:18.714Z,1513255098.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:19.017Z,1513255099.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:19.045Z,1513255099.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:19.061Z,1513255099.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:19.449Z,1513255099.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:19.464Z,1513255099.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:19.814Z,1513255099.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:19.849Z,1513255099.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:19.864Z,1513255099.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:20.264Z,1513255100.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:20.296Z,1513255100.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:20.611Z,1513255100.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:20.657Z,1513255100.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:20.688Z,1513255100.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:21.018Z,1513255101.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:21.049Z,1513255101.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:21.064Z,1513255101.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:21.452Z,1513255101.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:21.468Z,1513255101.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:21.813Z,1513255101.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:21.855Z,1513255101.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:21.904Z,1513255101.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:22.272Z,1513255102.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:22.313Z,1513255102.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:22.609Z,1513255102.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:22.642Z,1513255102.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:22.682Z,1513255102.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:23.014Z,1513255103.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:23.040Z,1513255103.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:23.074Z,1513255103.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:23.463Z,1513255103.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:23.515Z,1513255103.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:23.809Z,1513255103.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:23.870Z,1513255103.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:23.891Z,1513255103.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:24.309Z,1513255104.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:24.335Z,1513255104.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:24.607Z,1513255104.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:24.635Z,1513255104.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:24.658Z,1513255104.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:25.017Z,1513255105.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:25.041Z,1513255105.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:25.064Z,1513255105.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:25.436Z,1513255105.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:25.450Z,1513255105.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:25.815Z,1513255105.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:25.840Z,1513255105.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:25.855Z,1513255105.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:26.298Z,1513255106.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:26.338Z,1513255106.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:26.609Z,1513255106.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:26.664Z,1513255106.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:26.704Z,1513255106.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:27.013Z,1513255107.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:27.061Z,1513255107.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:27.125Z,1513255107.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:27.459Z,1513255107.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:27.474Z,1513255107.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:27.811Z,1513255107.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:27.839Z,1513255107.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:27.868Z,1513255107.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:28.315Z,1513255108.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:28.330Z,1513255108.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:28.605Z,1513255108.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:28.635Z,1513255108.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:28.682Z,1513255108.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:29.009Z,1513255109.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:29.039Z,1513255109.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:29.072Z,1513255109.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:29.445Z,1513255109.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:29.472Z,1513255109.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:29.806Z,1513255109.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:29.875Z,1513255109.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:29.919Z,1513255109.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:30.242Z,1513255110.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:30.333Z,1513255110.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:30.622Z,1513255110.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:30.648Z,1513255110.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:30.680Z,1513255110.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:31.031Z,1513255111.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:31.037Z,1513255111.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:31.060Z,1513255111.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:31.453Z,1513255111.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:31.485Z,1513255111.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:31.826Z,1513255111.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:31.853Z,1513255111.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:31.889Z,1513255111.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:32.257Z,1513255112.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:32.280Z,1513255112.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:32.621Z,1513255112.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:32.657Z,1513255112.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:32.736Z,1513255112.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:33.027Z,1513255113.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:33.031Z,1513255113.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:33.112Z,1513255113.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:33.441Z,1513255113.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:33.471Z,1513255113.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:33.823Z,1513255113.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:33.856Z,1513255113.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:33.871Z,1513255113.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:34.254Z,1513255114.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:34.276Z,1513255114.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:34.617Z,1513255114.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:34.667Z,1513255114.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:34.695Z,1513255114.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:35.024Z,1513255115.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:35.046Z,1513255115.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:35.062Z,1513255115.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:35.448Z,1513255115.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:35.463Z,1513255115.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:35.817Z,1513255115.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:35.852Z,1513255115.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:35.867Z,1513255115.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:36.335Z,1513255116.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:36.363Z,1513255116.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:36.641Z,1513255116.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:36.653Z,1513255116.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:36.659Z,1513255116.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:37.042Z,1513255117.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:37.057Z,1513255117.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:37.066Z,1513255117.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:37.443Z,1513255117.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:37.457Z,1513255117.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:37.839Z,1513255117.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:37.854Z,1513255117.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:37.919Z,1513255117.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:38.300Z,1513255118.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:38.323Z,1513255118.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:38.649Z,1513255118.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:38.652Z,1513255118.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:38.667Z,1513255118.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:39.053Z,1513255119.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:39.054Z,1513255119.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:39.147Z,1513255119.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:39.454Z,1513255119.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:39.469Z,1513255119.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:39.850Z,1513255119.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:40.645Z,1513255120.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:41.049Z,1513255121.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:41.846Z,1513255121.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:42.642Z,1513255122.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:42.974Z,1513255122.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.034Z,1513255123.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:43.045Z,1513255123.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.128Z,1513255123.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.147Z,1513255123.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:43.502Z,1513255123.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.551Z,1513255123.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:43.841Z,1513255123.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.906Z,1513255123.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:43.931Z,1513255123.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:44.360Z,1513255124.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:44.379Z,1513255124.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:44.640Z,1513255124.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:44.702Z,1513255124.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:44.724Z,1513255124.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:45.045Z,1513255125.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:45.086Z,1513255125.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:45.115Z,1513255125.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:45.487Z,1513255125.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:45.513Z,1513255125.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:45.842Z,1513255125.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:45.921Z,1513255125.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:45.978Z,1513255125.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:46.280Z,1513255126.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:46.313Z,1513255126.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:46.640Z,1513255126.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:46.709Z,1513255126.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:46.731Z,1513255126.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:47.045Z,1513255127.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:47.110Z,1513255127.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:47.132Z,1513255127.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:47.506Z,1513255127.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:47.521Z,1513255127.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:47.842Z,1513255127.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:47.887Z,1513255127.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:47.926Z,1513255127.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:48.288Z,1513255128.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:48.314Z,1513255128.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:48.638Z,1513255128.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:48.705Z,1513255128.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:48.719Z,1513255128.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:49.044Z,1513255129.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:49.128Z,1513255129.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:49.164Z,1513255129.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:49.513Z,1513255129.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:49.528Z,1513255129.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:49.838Z,1513255129.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:49.910Z,1513255129.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:49.924Z,1513255129.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:50.318Z,1513255130.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:50.333Z,1513255130.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:50.633Z,1513255130.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:50.683Z,1513255130.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:50.715Z,1513255130.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:51.037Z,1513255131.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:51.082Z,1513255131.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:51.116Z,1513255131.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:51.487Z,1513255131.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:51.511Z,1513255131.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:51.834Z,1513255131.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:51.883Z,1513255131.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:51.931Z,1513255131.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:52.348Z,1513255132.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:52.389Z,1513255132.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:52.629Z,1513255132.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:52.714Z,1513255132.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:52.734Z,1513255132.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:53.033Z,1513255133.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:53.099Z,1513255133.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:53.119Z,1513255133.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:53.497Z,1513255133.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:53.520Z,1513255133.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:53.830Z,1513255133.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:53.896Z,1513255133.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:53.922Z,1513255133.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:54.305Z,1513255134.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:54.332Z,1513255134.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:54.626Z,1513255134.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:54.684Z,1513255134.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:54.719Z,1513255134.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:55.029Z,1513255135.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:55.088Z,1513255135.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:55.114Z,1513255135.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:55.527Z,1513255135.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:55.556Z,1513255135.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:55.826Z,1513255135.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:55.909Z,1513255135.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:55.932Z,1513255135.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:56.328Z,1513255136.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:56.343Z,1513255136.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:56.621Z,1513255136.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:56.700Z,1513255136.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:56.727Z,1513255136.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:57.025Z,1513255137.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:57.094Z,1513255137.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:57.109Z,1513255137.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:57.489Z,1513255137.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:57.505Z,1513255137.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:57.823Z,1513255137.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:57.888Z,1513255137.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:57.907Z,1513255137.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:58.354Z,1513255138.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:58.374Z,1513255138.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:58.617Z,1513255138.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:58.703Z,1513255138.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:58.742Z,1513255138.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:59.021Z,1513255139.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:59.111Z,1513255139.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:59.131Z,1513255139.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:59.509Z,1513255139.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:59.531Z,1513255139.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:38:59.818Z,1513255139.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:59.887Z,1513255139.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:38:59.919Z,1513255139.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:00.287Z,1513255140.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:00.315Z,1513255140.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:00.615Z,1513255140.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:00.713Z,1513255140.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:00.728Z,1513255140.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:01.022Z,1513255141.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:01.091Z,1513255141.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:01.118Z,1513255141.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:01.494Z,1513255141.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:01.533Z,1513255141.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:01.818Z,1513255141.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:01.911Z,1513255141.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:01.947Z,1513255141.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:02.294Z,1513255142.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:02.323Z,1513255142.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:02.617Z,1513255142.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:02.714Z,1513255142.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:02.732Z,1513255142.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:03.025Z,1513255143.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:03.087Z,1513255143.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:03.119Z,1513255143.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:03.487Z,1513255143.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:03.521Z,1513255143.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:03.822Z,1513255143.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:03.888Z,1513255143.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:03.991Z,1513255143.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:04.324Z,1513255144.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:04.339Z,1513255144.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:04.618Z,1513255144.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:04.715Z,1513255144.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:04.774Z,1513255144.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:05.021Z,1513255145.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:05.138Z,1513255145.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:05.166Z,1513255145.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:05.509Z,1513255145.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:05.556Z,1513255145.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:05.819Z,1513255145.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:05.892Z,1513255145.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:05.907Z,1513255145.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:06.315Z,1513255146.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:06.342Z,1513255146.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:06.613Z,1513255146.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:06.692Z,1513255146.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:06.716Z,1513255146.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:07.017Z,1513255147.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:07.087Z,1513255147.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:07.123Z,1513255147.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:07.497Z,1513255147.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:07.524Z,1513255147.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:07.814Z,1513255147.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:07.904Z,1513255147.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:07.919Z,1513255147.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:08.358Z,1513255148.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:08.396Z,1513255148.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:08.609Z,1513255148.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:08.696Z,1513255148.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:08.727Z,1513255148.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:09.014Z,1513255149.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:09.091Z,1513255149.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:09.125Z,1513255149.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:09.481Z,1513255149.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:09.496Z,1513255149.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:09.810Z,1513255149.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:09.892Z,1513255149.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:09.923Z,1513255149.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:10.319Z,1513255150.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:10.341Z,1513255150.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:10.606Z,1513255150.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:10.701Z,1513255150.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:10.729Z,1513255150.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:11.011Z,1513255151.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:11.105Z,1513255151.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:11.128Z,1513255151.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:11.520Z,1513255151.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:11.576Z,1513255151.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:11.806Z,1513255151.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:11.889Z,1513255151.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:11.904Z,1513255151.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:12.348Z,1513255152.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:12.379Z,1513255152.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:12.601Z,1513255152.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:12.688Z,1513255152.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:12.721Z,1513255152.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:13.005Z,1513255153.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:13.083Z,1513255153.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:13.119Z,1513255153.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:13.493Z,1513255153.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:13.523Z,1513255153.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:13.801Z,1513255153.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:13.907Z,1513255153.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:13.963Z,1513255153.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:14.290Z,1513255154.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:14.324Z,1513255154.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:14.607Z,1513255154.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:14.706Z,1513255154.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:14.743Z,1513255154.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:15.021Z,1513255155.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:15.087Z,1513255155.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:15.120Z,1513255155.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:15.494Z,1513255155.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:15.509Z,1513255155.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:15.818Z,1513255155.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:15.891Z,1513255155.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:15.923Z,1513255155.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:16.296Z,1513255156.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:16.311Z,1513255156.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:16.615Z,1513255156.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:16.698Z,1513255156.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:16.727Z,1513255156.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:16.757Z,1513255156.757 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:39:17.022Z,1513255157.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:17.106Z,1513255157.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:17.129Z,1513255157.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:17.505Z,1513255157.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:17.531Z,1513255157.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:17.817Z,1513255157.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:17.931Z,1513255157.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:17.960Z,1513255157.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:18.305Z,1513255158.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:18.352Z,1513255158.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:18.615Z,1513255158.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:18.694Z,1513255158.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:18.709Z,1513255158.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:19.033Z,1513255159.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:19.089Z,1513255159.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:19.116Z,1513255159.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:19.501Z,1513255159.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:19.516Z,1513255159.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:19.832Z,1513255159.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:19.902Z,1513255159.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:19.918Z,1513255159.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:20.322Z,1513255160.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:20.346Z,1513255160.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:20.625Z,1513255160.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:20.686Z,1513255160.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:20.711Z,1513255160.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:21.030Z,1513255161.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:21.132Z,1513255161.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:21.197Z,1513255161.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:21.491Z,1513255161.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:21.510Z,1513255161.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:21.826Z,1513255161.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:21.891Z,1513255161.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:21.911Z,1513255161.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:22.306Z,1513255162.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:22.326Z,1513255162.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:22.622Z,1513255162.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:22.698Z,1513255162.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:22.726Z,1513255162.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:23.025Z,1513255163.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:23.106Z,1513255163.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:23.121Z,1513255163.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:23.507Z,1513255163.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:23.522Z,1513255163.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:23.821Z,1513255163.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:23.883Z,1513255163.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:23.910Z,1513255163.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:24.335Z,1513255164.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:24.378Z,1513255164.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:24.617Z,1513255164.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:24.706Z,1513255164.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:24.722Z,1513255164.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:25.022Z,1513255165.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:25.083Z,1513255165.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:25.114Z,1513255165.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:25.498Z,1513255165.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:25.520Z,1513255165.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:25.818Z,1513255165.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:25.904Z,1513255165.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:25.974Z,1513255165.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:26.366Z,1513255166.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:26.506Z,1513255166.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:26.615Z,1513255166.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:26.683Z,1513255166.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:26.719Z,1513255166.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:27.025Z,1513255167.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:27.084Z,1513255167.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:27.153Z,1513255167.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:27.480Z,1513255167.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:27.539Z,1513255167.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:27.822Z,1513255167.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:27.899Z,1513255167.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:27.963Z,1513255167.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:28.287Z,1513255168.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:28.326Z,1513255168.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:28.619Z,1513255168.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:28.716Z,1513255168.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:28.731Z,1513255168.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:29.021Z,1513255169.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:29.097Z,1513255169.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:29.131Z,1513255169.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:29.500Z,1513255169.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:29.523Z,1513255169.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:29.819Z,1513255169.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:29.887Z,1513255169.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:29.902Z,1513255169.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:30.288Z,1513255170.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:30.303Z,1513255170.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:30.614Z,1513255170.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:30.742Z,1513255170.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:30.788Z,1513255170.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:31.021Z,1513255171.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:31.094Z,1513255171.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:31.118Z,1513255171.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:31.505Z,1513255171.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:31.531Z,1513255171.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:31.817Z,1513255171.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:31.905Z,1513255171.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:31.944Z,1513255171.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:32.330Z,1513255172.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:32.351Z,1513255172.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:32.616Z,1513255172.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:32.695Z,1513255172.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:32.714Z,1513255172.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:33.025Z,1513255173.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:33.090Z,1513255173.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:33.108Z,1513255173.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:33.486Z,1513255173.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:33.506Z,1513255173.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:33.506Z,1513255173.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 242
2017-12-14T12:39:33.506Z,1513255173.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:39:33.507Z,1513255173.507 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:33.508Z,1513255173.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 242
2017-12-14T12:39:33.508Z,1513255173.508 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:39:33.510Z,1513255173.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:33.510Z,1513255173.510 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 242
2017-12-14T12:39:33.510Z,1513255173.510 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:39:33.531Z,1513255173.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:39:33.531Z,1513255173.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:39:33.531Z,1513255173.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:39:33.822Z,1513255173.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:33.932Z,1513255173.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:33.972Z,1513255173.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:39:33.972Z,1513255173.972 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 242
2017-12-14T12:39:33.993Z,1513255173.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:39:33.993Z,1513255173.993 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 242
2017-12-14T12:39:33.994Z,1513255173.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:39:33.994Z,1513255173.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 242
2017-12-14T12:39:34.302Z,1513255174.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:34.346Z,1513255174.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:39:34.346Z,1513255174.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:39:34.346Z,1513255174.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:39:34.347Z,1513255174.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:39:34.347Z,1513255174.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:39:34.347Z,1513255174.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:39:34.348Z,1513255174.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:39:34.348Z,1513255174.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:39:34.348Z,1513255174.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:39:34.619Z,1513255174.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:34.706Z,1513255174.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:34.721Z,1513255174.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:35.025Z,1513255175.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:35.109Z,1513255175.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:35.124Z,1513255175.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:35.500Z,1513255175.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:35.526Z,1513255175.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:35.821Z,1513255175.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:35.881Z,1513255175.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:35.908Z,1513255175.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:36.305Z,1513255176.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:36.354Z,1513255176.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:36.617Z,1513255176.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:36.684Z,1513255176.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:36.719Z,1513255176.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:37.021Z,1513255177.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:37.088Z,1513255177.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:37.156Z,1513255177.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:37.495Z,1513255177.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:37.526Z,1513255177.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:37.819Z,1513255177.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:37.917Z,1513255177.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:37.939Z,1513255177.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:38.340Z,1513255178.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:38.356Z,1513255178.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:38.613Z,1513255178.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:38.689Z,1513255178.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:38.719Z,1513255178.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:39.017Z,1513255179.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:39.094Z,1513255179.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:39.109Z,1513255179.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:39.112Z,1513255179.112 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:34:39.0Z
2017-12-14T12:39:39.112Z,1513255179.112 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T12:39:39.112Z,1513255179.112 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T12:39:39.494Z,1513255179.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:39.510Z,1513255179.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:39.814Z,1513255179.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:40.610Z,1513255180.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:41.014Z,1513255181.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:41.809Z,1513255181.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:42.606Z,1513255182.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:43.025Z,1513255183.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:43.667Z,1513255183.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:43.700Z,1513255183.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:43.773Z,1513255183.773 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0280.lzma
2017-12-14T12:39:43.822Z,1513255183.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:43.822Z,1513255183.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:43.862Z,1513255183.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:44.214Z,1513255184.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:44.235Z,1513255184.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:44.598Z,1513255184.598 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0280.lzma.bak
2017-12-14T12:39:44.598Z,1513255184.598 [DataOverHttps](INFO): SBD MOMSN=5438730
2017-12-14T12:39:44.618Z,1513255184.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:44.653Z,1513255184.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:44.697Z,1513255184.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:45.033Z,1513255185.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:45.830Z,1513255185.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:46.083Z,1513255186.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:46.098Z,1513255186.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:46.195Z,1513255186.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:46.282Z,1513255186.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:46.627Z,1513255186.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:47.029Z,1513255187.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:47.828Z,1513255187.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:48.626Z,1513255188.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:49.029Z,1513255189.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:49.753Z,1513255189.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:49.826Z,1513255189.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:49.850Z,1513255189.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:49.928Z,1513255189.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:49.955Z,1513255189.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:50.322Z,1513255190.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:50.354Z,1513255190.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:50.623Z,1513255190.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:50.742Z,1513255190.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:50.801Z,1513255190.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:51.029Z,1513255191.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:51.130Z,1513255191.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:51.153Z,1513255191.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:51.517Z,1513255191.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:51.555Z,1513255191.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:51.825Z,1513255191.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:52.621Z,1513255192.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:53.025Z,1513255193.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:55.028Z,1513255195.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:55.053Z,1513255195.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:55.136Z,1513255195.136 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20171214T002839/Express0281.lzma
2017-12-14T12:39:55.159Z,1513255195.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:55.203Z,1513255195.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:55.509Z,1513255195.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:55.525Z,1513255195.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:55.880Z,1513255195.880 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0281.lzma.bak
2017-12-14T12:39:55.880Z,1513255195.880 [DataOverHttps](INFO): SBD MOMSN=5438734
2017-12-14T12:39:55.940Z,1513255195.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:55.955Z,1513255195.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:57.250Z,1513255197.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:57.268Z,1513255197.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:39:57.271Z,1513255197.271 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T12:39:57.271Z,1513255197.271 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T12:39:57.271Z,1513255197.271 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T12:39:57.407Z,1513255197.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:39:57.428Z,1513255197.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:01.014Z,1513255201.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:01.068Z,1513255201.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:01.168Z,1513255201.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:01.211Z,1513255201.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:01.534Z,1513255201.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:01.556Z,1513255201.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:01.948Z,1513255201.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:01.967Z,1513255201.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:02.330Z,1513255202.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:02.363Z,1513255202.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:02.719Z,1513255202.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:02.755Z,1513255202.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:03.120Z,1513255203.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:03.139Z,1513255203.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:03.537Z,1513255203.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:03.571Z,1513255203.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:03.931Z,1513255203.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:03.969Z,1513255203.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:04.331Z,1513255204.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:04.365Z,1513255204.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:04.734Z,1513255204.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:04.769Z,1513255204.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:05.136Z,1513255205.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:05.167Z,1513255205.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:05.539Z,1513255205.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:05.568Z,1513255205.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:05.924Z,1513255205.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:05.939Z,1513255205.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:06.323Z,1513255206.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:06.339Z,1513255206.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:06.727Z,1513255206.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:06.759Z,1513255206.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:07.122Z,1513255207.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:07.141Z,1513255207.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:07.528Z,1513255207.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:07.543Z,1513255207.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:07.934Z,1513255207.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:07.950Z,1513255207.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:08.356Z,1513255208.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:08.383Z,1513255208.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:08.719Z,1513255208.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:08.746Z,1513255208.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:09.128Z,1513255209.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:09.159Z,1513255209.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:09.527Z,1513255209.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:09.547Z,1513255209.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:09.961Z,1513255209.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:10.038Z,1513255210.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:10.321Z,1513255210.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:10.353Z,1513255210.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:10.733Z,1513255210.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:10.752Z,1513255210.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:11.135Z,1513255211.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:11.164Z,1513255211.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:11.538Z,1513255211.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:11.558Z,1513255211.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:11.920Z,1513255211.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:11.952Z,1513255211.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:12.314Z,1513255212.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:12.357Z,1513255212.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:12.716Z,1513255212.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:12.747Z,1513255212.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:13.119Z,1513255213.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:13.227Z,1513255213.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:13.534Z,1513255213.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:13.575Z,1513255213.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:13.934Z,1513255213.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:14.000Z,1513255214.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:14.330Z,1513255214.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:14.363Z,1513255214.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:14.720Z,1513255214.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:14.767Z,1513255214.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:15.120Z,1513255215.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:15.136Z,1513255215.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:15.521Z,1513255215.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:15.536Z,1513255215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:15.926Z,1513255215.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:15.940Z,1513255215.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:16.324Z,1513255216.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:16.388Z,1513255216.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:16.737Z,1513255216.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:16.770Z,1513255216.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:17.189Z,1513255217.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:17.219Z,1513255217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:17.526Z,1513255217.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:17.542Z,1513255217.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:17.925Z,1513255217.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:17.940Z,1513255217.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:18.324Z,1513255218.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:18.338Z,1513255218.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:18.727Z,1513255218.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:18.742Z,1513255218.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:19.124Z,1513255219.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:19.140Z,1513255219.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:19.541Z,1513255219.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:19.595Z,1513255219.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:19.929Z,1513255219.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:19.947Z,1513255219.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:20.326Z,1513255220.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:20.341Z,1513255220.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:20.748Z,1513255220.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:20.770Z,1513255220.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:21.125Z,1513255221.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:21.140Z,1513255221.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:21.522Z,1513255221.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:21.544Z,1513255221.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:21.927Z,1513255221.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:21.942Z,1513255221.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:22.356Z,1513255222.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:22.380Z,1513255222.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:22.765Z,1513255222.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:22.826Z,1513255222.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:23.129Z,1513255223.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:23.146Z,1513255223.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:23.537Z,1513255223.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:23.575Z,1513255223.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:23.921Z,1513255223.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:23.943Z,1513255223.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:24.361Z,1513255224.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:24.376Z,1513255224.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:24.732Z,1513255224.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:24.748Z,1513255224.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:25.127Z,1513255225.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:25.142Z,1513255225.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:25.535Z,1513255225.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:25.551Z,1513255225.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:25.952Z,1513255225.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:25.988Z,1513255225.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:26.336Z,1513255226.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:26.352Z,1513255226.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:26.715Z,1513255226.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:26.750Z,1513255226.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:27.111Z,1513255227.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:27.191Z,1513255227.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:27.519Z,1513255227.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:27.544Z,1513255227.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:27.915Z,1513255227.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:27.954Z,1513255227.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:28.318Z,1513255228.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:28.359Z,1513255228.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:28.738Z,1513255228.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:28.759Z,1513255228.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:29.169Z,1513255229.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:29.217Z,1513255229.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:29.525Z,1513255229.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:29.551Z,1513255229.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:29.923Z,1513255229.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:29.953Z,1513255229.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:30.341Z,1513255230.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:30.356Z,1513255230.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:30.728Z,1513255230.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:30.753Z,1513255230.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:31.148Z,1513255231.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:31.196Z,1513255231.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:31.529Z,1513255231.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:31.563Z,1513255231.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:31.944Z,1513255231.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:31.967Z,1513255231.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:32.330Z,1513255232.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:32.363Z,1513255232.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:32.724Z,1513255232.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:32.761Z,1513255232.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:33.120Z,1513255233.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:33.139Z,1513255233.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:33.523Z,1513255233.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:33.538Z,1513255233.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:33.924Z,1513255233.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:33.940Z,1513255233.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:34.323Z,1513255234.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:34.343Z,1513255234.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:34.738Z,1513255234.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:34.843Z,1513255234.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:35.136Z,1513255235.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:35.156Z,1513255235.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:35.552Z,1513255235.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:35.599Z,1513255235.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:35.937Z,1513255235.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:36.007Z,1513255236.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:36.362Z,1513255236.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:36.391Z,1513255236.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:36.717Z,1513255236.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:36.790Z,1513255236.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:37.119Z,1513255237.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:37.152Z,1513255237.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:37.533Z,1513255237.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:37.549Z,1513255237.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:37.942Z,1513255237.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:37.958Z,1513255237.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:38.339Z,1513255238.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:38.355Z,1513255238.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:38.715Z,1513255238.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:38.782Z,1513255238.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:39.114Z,1513255239.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:39.151Z,1513255239.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:39.519Z,1513255239.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:39.550Z,1513255239.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:39.920Z,1513255239.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:39.949Z,1513255239.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:40.313Z,1513255240.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:40.327Z,1513255240.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:40.726Z,1513255240.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:40.754Z,1513255240.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:41.129Z,1513255241.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:41.159Z,1513255241.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:41.525Z,1513255241.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:41.555Z,1513255241.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:41.954Z,1513255241.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:41.994Z,1513255241.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:42.347Z,1513255242.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:42.367Z,1513255242.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:42.724Z,1513255242.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:42.755Z,1513255242.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:43.123Z,1513255243.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:43.163Z,1513255243.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:43.533Z,1513255243.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:43.565Z,1513255243.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:43.933Z,1513255243.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:43.967Z,1513255243.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:44.341Z,1513255244.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:44.371Z,1513255244.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:44.725Z,1513255244.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:44.739Z,1513255244.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:45.179Z,1513255245.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:45.224Z,1513255245.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:45.524Z,1513255245.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:45.548Z,1513255245.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:45.926Z,1513255245.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:45.991Z,1513255245.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:46.321Z,1513255246.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:46.336Z,1513255246.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:46.737Z,1513255246.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:46.767Z,1513255246.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:47.134Z,1513255247.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:47.168Z,1513255247.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:47.529Z,1513255247.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:47.545Z,1513255247.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:47.920Z,1513255247.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:47.943Z,1513255247.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:48.356Z,1513255248.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:48.388Z,1513255248.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:48.741Z,1513255248.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:48.757Z,1513255248.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:49.115Z,1513255249.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:49.148Z,1513255249.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:49.532Z,1513255249.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:49.549Z,1513255249.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:49.937Z,1513255249.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:49.953Z,1513255249.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:50.360Z,1513255250.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:50.389Z,1513255250.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:50.736Z,1513255250.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:50.752Z,1513255250.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:51.116Z,1513255251.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:51.148Z,1513255251.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:51.527Z,1513255251.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:51.547Z,1513255251.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:51.915Z,1513255251.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:51.940Z,1513255251.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:52.315Z,1513255252.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:52.340Z,1513255252.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:52.732Z,1513255252.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:52.748Z,1513255252.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:53.141Z,1513255253.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:53.157Z,1513255253.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:53.542Z,1513255253.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:53.624Z,1513255253.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:53.918Z,1513255253.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:53.951Z,1513255253.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:54.327Z,1513255254.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:54.349Z,1513255254.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:54.722Z,1513255254.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:54.749Z,1513255254.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:55.115Z,1513255255.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:55.151Z,1513255255.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:55.539Z,1513255255.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:55.554Z,1513255255.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:55.937Z,1513255255.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:55.960Z,1513255255.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:56.326Z,1513255256.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:56.359Z,1513255256.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:56.715Z,1513255256.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:56.751Z,1513255256.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:57.116Z,1513255257.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:57.175Z,1513255257.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:57.520Z,1513255257.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:57.580Z,1513255257.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:40:57.970Z,1513255257.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:40:58.007Z,1513255258.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:01.320Z,1513255261.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:01.367Z,1513255261.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:01.474Z,1513255261.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:01.498Z,1513255261.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:01.846Z,1513255261.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:01.891Z,1513255261.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:02.318Z,1513255262.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:02.332Z,1513255262.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:02.637Z,1513255262.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:02.664Z,1513255262.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:03.035Z,1513255263.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:03.050Z,1513255263.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:03.427Z,1513255263.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:03.443Z,1513255263.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:03.826Z,1513255263.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:03.841Z,1513255263.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:04.232Z,1513255264.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:04.246Z,1513255264.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:04.627Z,1513255264.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:04.666Z,1513255264.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:05.042Z,1513255265.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:05.060Z,1513255265.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:05.441Z,1513255265.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:05.463Z,1513255265.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:05.823Z,1513255265.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:05.856Z,1513255265.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:06.221Z,1513255266.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:06.252Z,1513255266.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:06.659Z,1513255266.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:06.690Z,1513255266.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:07.037Z,1513255267.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:07.051Z,1513255267.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:07.440Z,1513255267.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:07.456Z,1513255267.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:07.850Z,1513255267.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:07.865Z,1513255267.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:08.228Z,1513255268.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:08.253Z,1513255268.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:08.656Z,1513255268.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:08.704Z,1513255268.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:09.018Z,1513255269.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:09.052Z,1513255269.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:09.427Z,1513255269.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:09.450Z,1513255269.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:09.839Z,1513255269.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:09.854Z,1513255269.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:10.283Z,1513255270.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:10.346Z,1513255270.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:10.655Z,1513255270.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:10.679Z,1513255270.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:11.024Z,1513255271.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:11.051Z,1513255271.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:11.434Z,1513255271.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:11.449Z,1513255271.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:11.833Z,1513255271.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:11.848Z,1513255271.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:12.272Z,1513255272.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:12.307Z,1513255272.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:12.630Z,1513255272.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:12.657Z,1513255272.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:13.028Z,1513255273.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:13.042Z,1513255273.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:13.434Z,1513255273.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:13.469Z,1513255273.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:13.842Z,1513255273.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:13.894Z,1513255273.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:14.257Z,1513255274.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:14.312Z,1513255274.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:14.640Z,1513255274.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:14.655Z,1513255274.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:15.033Z,1513255275.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:15.048Z,1513255275.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:15.438Z,1513255275.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:15.464Z,1513255275.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:15.830Z,1513255275.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:15.859Z,1513255275.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:16.283Z,1513255276.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:16.313Z,1513255276.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:16.628Z,1513255276.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:16.655Z,1513255276.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:17.074Z,1513255277.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:17.111Z,1513255277.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:17.439Z,1513255277.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:17.459Z,1513255277.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:17.845Z,1513255277.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:17.867Z,1513255277.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:18.234Z,1513255278.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:18.249Z,1513255278.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:18.649Z,1513255278.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:18.684Z,1513255278.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:19.065Z,1513255279.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:19.080Z,1513255279.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:19.456Z,1513255279.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:19.471Z,1513255279.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:19.844Z,1513255279.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:19.877Z,1513255279.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:20.260Z,1513255280.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:20.275Z,1513255280.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:20.661Z,1513255280.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:20.695Z,1513255280.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:21.029Z,1513255281.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:21.074Z,1513255281.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:21.447Z,1513255281.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:21.482Z,1513255281.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:21.874Z,1513255281.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:21.899Z,1513255281.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:22.232Z,1513255282.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:22.291Z,1513255282.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:22.637Z,1513255282.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:22.708Z,1513255282.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:23.045Z,1513255283.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:23.069Z,1513255283.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:23.435Z,1513255283.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:23.503Z,1513255283.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:23.850Z,1513255283.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:23.912Z,1513255283.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:24.295Z,1513255284.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:24.363Z,1513255284.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:24.620Z,1513255284.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:24.660Z,1513255284.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:25.025Z,1513255285.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:25.102Z,1513255285.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:25.435Z,1513255285.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:25.459Z,1513255285.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:25.826Z,1513255285.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:25.863Z,1513255285.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:26.292Z,1513255286.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:26.348Z,1513255286.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:26.655Z,1513255286.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:26.675Z,1513255286.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:27.050Z,1513255287.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:27.118Z,1513255287.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:27.461Z,1513255287.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:27.476Z,1513255287.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:27.816Z,1513255287.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:27.846Z,1513255287.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:28.258Z,1513255288.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:28.324Z,1513255288.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:28.631Z,1513255288.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:28.648Z,1513255288.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:29.026Z,1513255289.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:29.042Z,1513255289.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:29.447Z,1513255289.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:29.477Z,1513255289.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:29.833Z,1513255289.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:29.882Z,1513255289.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:30.318Z,1513255290.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:30.386Z,1513255290.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:30.634Z,1513255290.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:30.652Z,1513255290.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:31.032Z,1513255291.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:31.083Z,1513255291.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:31.433Z,1513255291.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:31.458Z,1513255291.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:31.831Z,1513255291.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:31.889Z,1513255291.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:32.218Z,1513255292.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:32.327Z,1513255292.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:32.647Z,1513255292.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:32.703Z,1513255292.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:33.047Z,1513255293.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:33.092Z,1513255293.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:33.439Z,1513255293.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:33.467Z,1513255293.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:33.827Z,1513255293.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:33.851Z,1513255293.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:34.220Z,1513255294.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:34.255Z,1513255294.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:34.640Z,1513255294.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:34.712Z,1513255294.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:35.023Z,1513255295.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:35.066Z,1513255295.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:35.445Z,1513255295.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:35.472Z,1513255295.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:35.856Z,1513255295.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:35.924Z,1513255295.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:36.234Z,1513255296.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:36.263Z,1513255296.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:36.640Z,1513255296.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:36.676Z,1513255296.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:37.038Z,1513255297.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:37.071Z,1513255297.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:37.435Z,1513255297.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:37.472Z,1513255297.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:37.836Z,1513255297.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:37.873Z,1513255297.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:38.269Z,1513255298.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:38.316Z,1513255298.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:38.623Z,1513255298.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:38.660Z,1513255298.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:39.024Z,1513255299.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:39.070Z,1513255299.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:39.437Z,1513255299.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:39.461Z,1513255299.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:39.839Z,1513255299.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:39.875Z,1513255299.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:40.304Z,1513255300.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:40.343Z,1513255300.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:40.620Z,1513255300.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:40.690Z,1513255300.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:41.040Z,1513255301.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:41.064Z,1513255301.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:41.423Z,1513255301.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:41.464Z,1513255301.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:41.821Z,1513255301.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:41.835Z,1513255301.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:42.273Z,1513255302.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:42.325Z,1513255302.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:42.643Z,1513255302.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:42.687Z,1513255302.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:43.040Z,1513255303.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:43.084Z,1513255303.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:43.441Z,1513255303.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:43.499Z,1513255303.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:43.825Z,1513255303.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:43.863Z,1513255303.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:44.279Z,1513255304.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:44.374Z,1513255304.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:44.631Z,1513255304.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:44.659Z,1513255304.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:45.042Z,1513255305.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:45.071Z,1513255305.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:45.441Z,1513255305.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:45.532Z,1513255305.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:45.854Z,1513255305.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:45.898Z,1513255305.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:46.240Z,1513255306.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:46.354Z,1513255306.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:46.619Z,1513255306.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:46.667Z,1513255306.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:47.022Z,1513255307.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:47.087Z,1513255307.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:47.425Z,1513255307.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:47.440Z,1513255307.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:47.837Z,1513255307.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:47.866Z,1513255307.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:48.237Z,1513255308.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:48.263Z,1513255308.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:48.662Z,1513255308.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:48.698Z,1513255308.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:49.025Z,1513255309.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:49.040Z,1513255309.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:49.417Z,1513255309.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:49.436Z,1513255309.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:49.828Z,1513255309.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:49.863Z,1513255309.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:50.225Z,1513255310.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:50.239Z,1513255310.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:50.655Z,1513255310.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:50.682Z,1513255310.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:51.038Z,1513255311.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:51.053Z,1513255311.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:51.440Z,1513255311.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:51.456Z,1513255311.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:51.829Z,1513255311.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:51.844Z,1513255311.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:52.241Z,1513255312.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:52.305Z,1513255312.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:52.630Z,1513255312.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:52.661Z,1513255312.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:53.024Z,1513255313.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:53.043Z,1513255313.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:53.439Z,1513255313.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:53.470Z,1513255313.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:53.836Z,1513255313.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:53.867Z,1513255313.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:54.263Z,1513255314.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:54.297Z,1513255314.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:54.637Z,1513255314.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:54.652Z,1513255314.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:55.036Z,1513255315.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:55.061Z,1513255315.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:55.443Z,1513255315.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:55.502Z,1513255315.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:55.837Z,1513255315.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:55.853Z,1513255315.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:56.266Z,1513255316.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:56.315Z,1513255316.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:56.628Z,1513255316.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:56.659Z,1513255316.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:57.026Z,1513255317.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:57.063Z,1513255317.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:57.433Z,1513255317.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:57.448Z,1513255317.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:57.846Z,1513255317.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:57.869Z,1513255317.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:41:58.263Z,1513255318.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:41:58.289Z,1513255318.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:01.719Z,1513255321.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:01.734Z,1513255321.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:01.840Z,1513255321.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:01.869Z,1513255321.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:02.261Z,1513255322.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:02.277Z,1513255322.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:02.649Z,1513255322.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:02.722Z,1513255322.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:03.022Z,1513255323.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:03.041Z,1513255323.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:03.414Z,1513255323.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:03.439Z,1513255323.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:03.812Z,1513255323.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:03.837Z,1513255323.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:04.211Z,1513255324.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:04.236Z,1513255324.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:04.634Z,1513255324.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:04.649Z,1513255324.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:05.033Z,1513255325.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:05.048Z,1513255325.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:05.420Z,1513255325.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:05.451Z,1513255325.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:05.818Z,1513255325.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:05.863Z,1513255325.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:06.223Z,1513255326.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:06.283Z,1513255326.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:06.605Z,1513255326.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:06.648Z,1513255326.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:07.012Z,1513255327.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:07.019Z,1513255327.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x36400 got:0x41922
2017-12-14T12:42:07.103Z,1513255327.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:07.412Z,1513255327.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:07.451Z,1513255327.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:07.826Z,1513255327.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:07.851Z,1513255327.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:08.226Z,1513255328.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:08.311Z,1513255328.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:08.625Z,1513255328.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:08.654Z,1513255328.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:09.030Z,1513255329.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:09.103Z,1513255329.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:09.413Z,1513255329.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:09.428Z,1513255329.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:09.809Z,1513255329.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:09.831Z,1513255329.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:10.210Z,1513255330.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:10.282Z,1513255330.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:10.655Z,1513255330.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:10.726Z,1513255330.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:11.013Z,1513255331.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:11.050Z,1513255331.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:11.406Z,1513255331.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:11.455Z,1513255331.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:11.811Z,1513255331.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:11.819Z,1513255331.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x41079 got:0x46717
2017-12-14T12:42:11.860Z,1513255331.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:12.281Z,1513255332.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:12.335Z,1513255332.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:12.616Z,1513255332.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:12.643Z,1513255332.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:13.011Z,1513255333.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:13.049Z,1513255333.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:13.420Z,1513255333.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:13.434Z,1513255333.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:13.819Z,1513255333.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:13.847Z,1513255333.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:14.234Z,1513255334.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:14.343Z,1513255334.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:14.602Z,1513255334.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:14.647Z,1513255334.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:14.998Z,1513255334.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:15.032Z,1513255335.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:15.403Z,1513255335.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:15.430Z,1513255335.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:15.823Z,1513255335.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:15.847Z,1513255335.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:16.222Z,1513255336.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:16.251Z,1513255336.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:16.653Z,1513255336.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:16.697Z,1513255336.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:17.010Z,1513255337.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:17.025Z,1513255337.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:17.413Z,1513255337.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:17.459Z,1513255337.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:17.806Z,1513255337.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:17.850Z,1513255337.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:18.213Z,1513255338.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:18.219Z,1513255338.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x15698 got:0x16897
2017-12-14T12:42:18.253Z,1513255338.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:18.665Z,1513255338.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:18.682Z,1513255338.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:19.021Z,1513255339.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:19.043Z,1513255339.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:19.426Z,1513255339.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:19.447Z,1513255339.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:19.816Z,1513255339.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:19.843Z,1513255339.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:20.239Z,1513255340.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:20.302Z,1513255340.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:20.601Z,1513255340.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:20.626Z,1513255340.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:21.003Z,1513255341.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:21.042Z,1513255341.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:21.399Z,1513255341.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:21.438Z,1513255341.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:21.819Z,1513255341.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:21.847Z,1513255341.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:22.271Z,1513255342.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:22.348Z,1513255342.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:22.613Z,1513255342.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:22.656Z,1513255342.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:23.006Z,1513255343.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:23.046Z,1513255343.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:23.403Z,1513255343.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:23.419Z,1513255343.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:23.824Z,1513255343.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:23.859Z,1513255343.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:24.232Z,1513255344.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:24.310Z,1513255344.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:24.619Z,1513255344.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:24.636Z,1513255344.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:25.018Z,1513255345.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:25.043Z,1513255345.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:25.421Z,1513255345.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:25.436Z,1513255345.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:25.808Z,1513255345.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:25.832Z,1513255345.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:26.223Z,1513255346.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:26.296Z,1513255346.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:26.610Z,1513255346.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:26.649Z,1513255346.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:27.007Z,1513255347.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:27.044Z,1513255347.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:27.407Z,1513255347.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:27.447Z,1513255347.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:27.822Z,1513255347.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:27.839Z,1513255347.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x47251 got:0x16850
2017-12-14T12:42:27.860Z,1513255347.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:28.218Z,1513255348.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:28.243Z,1513255348.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:28.648Z,1513255348.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:28.676Z,1513255348.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:29.007Z,1513255349.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:29.048Z,1513255349.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:29.408Z,1513255349.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:29.466Z,1513255349.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:29.812Z,1513255349.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:29.843Z,1513255349.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:30.215Z,1513255350.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:30.256Z,1513255350.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:30.673Z,1513255350.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:30.713Z,1513255350.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:31.020Z,1513255351.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:31.071Z,1513255351.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:31.422Z,1513255351.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:31.437Z,1513255351.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:31.807Z,1513255351.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:31.835Z,1513255351.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:32.223Z,1513255352.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:32.238Z,1513255352.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:32.640Z,1513255352.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:32.691Z,1513255352.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:33.016Z,1513255353.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:33.036Z,1513255353.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:33.422Z,1513255353.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:33.438Z,1513255353.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:33.832Z,1513255353.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:33.871Z,1513255353.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:34.237Z,1513255354.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:34.287Z,1513255354.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:34.611Z,1513255354.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:34.647Z,1513255354.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:34.647Z,1513255354.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 243
2017-12-14T12:42:34.647Z,1513255354.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:42:34.653Z,1513255354.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:34.653Z,1513255354.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 243
2017-12-14T12:42:34.653Z,1513255354.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:42:34.655Z,1513255354.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:34.655Z,1513255354.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 243
2017-12-14T12:42:34.655Z,1513255354.655 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:42:34.676Z,1513255354.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:42:34.676Z,1513255354.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:42:34.676Z,1513255354.676 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:42:35.073Z,1513255355.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:35.131Z,1513255355.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:42:35.131Z,1513255355.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 243
2017-12-14T12:42:35.131Z,1513255355.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:42:35.131Z,1513255355.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 243
2017-12-14T12:42:35.132Z,1513255355.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:42:35.132Z,1513255355.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 243
2017-12-14T12:42:35.422Z,1513255355.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:35.442Z,1513255355.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:42:35.442Z,1513255355.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:42:35.443Z,1513255355.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:42:35.443Z,1513255355.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:42:35.443Z,1513255355.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:42:35.444Z,1513255355.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:42:35.444Z,1513255355.444 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:42:35.444Z,1513255355.444 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:42:35.445Z,1513255355.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:42:35.827Z,1513255355.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:35.843Z,1513255355.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:36.256Z,1513255356.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:36.326Z,1513255356.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:36.606Z,1513255356.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:36.631Z,1513255356.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:37.007Z,1513255357.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:37.030Z,1513255357.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:37.414Z,1513255357.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:37.428Z,1513255357.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:37.811Z,1513255357.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:37.832Z,1513255357.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:38.268Z,1513255358.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:38.300Z,1513255358.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:38.609Z,1513255358.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:38.651Z,1513255358.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:39.006Z,1513255359.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:39.037Z,1513255359.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:39.412Z,1513255359.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:39.484Z,1513255359.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:39.805Z,1513255359.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:39.841Z,1513255359.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:40.199Z,1513255360.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:40.284Z,1513255360.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:40.626Z,1513255360.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:40.663Z,1513255360.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:41.021Z,1513255361.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:41.045Z,1513255361.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:41.426Z,1513255361.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:41.451Z,1513255361.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:41.820Z,1513255361.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:41.853Z,1513255361.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:42.213Z,1513255362.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:42.229Z,1513255362.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:42.610Z,1513255362.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:42.637Z,1513255362.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:43.018Z,1513255363.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:43.034Z,1513255363.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:43.403Z,1513255363.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:43.438Z,1513255363.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:43.819Z,1513255363.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:43.851Z,1513255363.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:44.228Z,1513255364.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:44.244Z,1513255364.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:44.670Z,1513255364.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:44.717Z,1513255364.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:45.008Z,1513255365.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:45.032Z,1513255365.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:45.411Z,1513255365.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:45.426Z,1513255365.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:45.819Z,1513255365.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:45.854Z,1513255365.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:46.216Z,1513255366.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:46.231Z,1513255366.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:46.660Z,1513255366.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:46.704Z,1513255366.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:47.036Z,1513255367.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:47.055Z,1513255367.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:47.433Z,1513255367.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:47.449Z,1513255367.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:47.808Z,1513255367.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:47.877Z,1513255367.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:48.224Z,1513255368.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:48.316Z,1513255368.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:48.614Z,1513255368.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:48.654Z,1513255368.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:49.008Z,1513255369.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:49.028Z,1513255369.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:49.426Z,1513255369.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:49.455Z,1513255369.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:49.822Z,1513255369.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:49.849Z,1513255369.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:50.271Z,1513255370.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:50.323Z,1513255370.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:50.603Z,1513255370.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:50.630Z,1513255370.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:51.033Z,1513255371.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:51.076Z,1513255371.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:51.398Z,1513255371.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:51.459Z,1513255371.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:51.829Z,1513255371.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:51.844Z,1513255371.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:52.247Z,1513255372.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:52.315Z,1513255372.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:52.625Z,1513255372.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:52.695Z,1513255372.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:53.004Z,1513255373.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:53.042Z,1513255373.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:53.408Z,1513255373.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:53.471Z,1513255373.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:53.814Z,1513255373.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:53.828Z,1513255373.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:54.286Z,1513255374.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:54.366Z,1513255374.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:54.610Z,1513255374.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:54.651Z,1513255374.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:55.023Z,1513255375.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:55.057Z,1513255375.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:55.414Z,1513255375.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:55.435Z,1513255375.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:55.799Z,1513255375.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:55.830Z,1513255375.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:56.210Z,1513255376.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:56.232Z,1513255376.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:56.603Z,1513255376.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:56.628Z,1513255376.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:57.006Z,1513255377.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:57.027Z,1513255377.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:57.401Z,1513255377.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:57.454Z,1513255377.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:57.809Z,1513255377.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:57.843Z,1513255377.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:58.216Z,1513255378.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:58.247Z,1513255378.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:42:58.648Z,1513255378.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:42:58.692Z,1513255378.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:01.994Z,1513255381.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:02.048Z,1513255382.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:02.141Z,1513255382.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:02.194Z,1513255382.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:02.513Z,1513255382.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:02.528Z,1513255382.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:02.917Z,1513255382.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:02.952Z,1513255382.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:03.319Z,1513255383.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:03.350Z,1513255383.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:03.706Z,1513255383.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:03.721Z,1513255383.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:04.103Z,1513255384.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:04.118Z,1513255384.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:04.503Z,1513255384.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:04.518Z,1513255384.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:04.900Z,1513255384.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:04.924Z,1513255384.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:05.308Z,1513255385.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:05.322Z,1513255385.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:05.712Z,1513255385.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:05.728Z,1513255385.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:06.111Z,1513255386.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:06.132Z,1513255386.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:06.514Z,1513255386.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:06.528Z,1513255386.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:06.904Z,1513255386.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:06.919Z,1513255386.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:07.310Z,1513255387.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:07.326Z,1513255387.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:07.695Z,1513255387.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:07.728Z,1513255387.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:08.092Z,1513255388.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:08.124Z,1513255388.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:08.514Z,1513255388.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:08.529Z,1513255388.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:08.917Z,1513255388.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:08.944Z,1513255388.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:09.315Z,1513255389.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:09.330Z,1513255389.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:09.697Z,1513255389.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:09.735Z,1513255389.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:10.132Z,1513255390.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:10.174Z,1513255390.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:10.495Z,1513255390.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:10.532Z,1513255390.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:10.896Z,1513255390.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:10.931Z,1513255390.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:11.295Z,1513255391.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:11.330Z,1513255391.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:11.718Z,1513255391.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:11.739Z,1513255391.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:12.120Z,1513255392.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:12.143Z,1513255392.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:12.521Z,1513255392.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:12.635Z,1513255392.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:12.900Z,1513255392.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:12.917Z,1513255392.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:13.305Z,1513255393.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:13.321Z,1513255393.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:13.703Z,1513255393.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:13.777Z,1513255393.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:14.102Z,1513255394.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:14.124Z,1513255394.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:14.513Z,1513255394.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:14.625Z,1513255394.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:14.932Z,1513255394.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:14.947Z,1513255394.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:15.309Z,1513255395.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:15.363Z,1513255395.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:15.701Z,1513255395.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:15.731Z,1513255395.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:16.096Z,1513255396.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:16.111Z,1513255396.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:16.520Z,1513255396.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:16.553Z,1513255396.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:16.904Z,1513255396.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:16.920Z,1513255396.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:17.299Z,1513255397.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:17.313Z,1513255397.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:17.710Z,1513255397.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:17.724Z,1513255397.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:18.117Z,1513255398.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:18.149Z,1513255398.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:18.509Z,1513255398.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:18.531Z,1513255398.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:18.903Z,1513255398.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:18.923Z,1513255398.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:19.300Z,1513255399.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:19.328Z,1513255399.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:19.743Z,1513255399.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:19.779Z,1513255399.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:20.095Z,1513255400.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:20.119Z,1513255400.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:20.514Z,1513255400.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:20.528Z,1513255400.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:20.922Z,1513255400.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:20.937Z,1513255400.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:21.310Z,1513255401.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:21.337Z,1513255401.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:21.698Z,1513255401.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:21.725Z,1513255401.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:22.098Z,1513255402.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:22.123Z,1513255402.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:22.495Z,1513255402.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:22.519Z,1513255402.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:22.899Z,1513255402.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:22.951Z,1513255402.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:23.299Z,1513255403.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:23.329Z,1513255403.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:23.710Z,1513255403.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:23.763Z,1513255403.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:24.117Z,1513255404.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:24.142Z,1513255404.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:24.517Z,1513255404.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:24.545Z,1513255404.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:24.903Z,1513255404.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:24.923Z,1513255404.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:25.303Z,1513255405.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:25.318Z,1513255405.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:25.705Z,1513255405.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:25.719Z,1513255405.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:26.115Z,1513255406.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:26.152Z,1513255406.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:26.505Z,1513255406.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:26.528Z,1513255406.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:26.916Z,1513255406.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:26.932Z,1513255406.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:27.310Z,1513255407.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:27.334Z,1513255407.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:27.698Z,1513255407.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:27.724Z,1513255407.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:27.821Z,1513255407.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:28.099Z,1513255408.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:28.131Z,1513255408.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:28.492Z,1513255408.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:28.527Z,1513255408.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:28.618Z,1513255408.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:28.895Z,1513255408.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:28.935Z,1513255408.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:29.021Z,1513255409.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:29.335Z,1513255409.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:29.394Z,1513255409.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:29.709Z,1513255409.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:29.734Z,1513255409.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:30.109Z,1513255410.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:30.139Z,1513255410.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:30.531Z,1513255410.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:30.551Z,1513255410.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:30.899Z,1513255410.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:30.916Z,1513255410.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:31.302Z,1513255411.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:31.317Z,1513255411.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:31.698Z,1513255411.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:31.713Z,1513255411.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:32.100Z,1513255412.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:32.115Z,1513255412.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:32.542Z,1513255412.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:32.602Z,1513255412.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:32.918Z,1513255412.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:32.949Z,1513255412.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:33.310Z,1513255413.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:33.348Z,1513255413.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:33.701Z,1513255413.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:33.715Z,1513255413.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:34.100Z,1513255414.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:34.127Z,1513255414.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:34.503Z,1513255414.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:34.558Z,1513255414.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:34.902Z,1513255414.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:34.931Z,1513255414.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:35.307Z,1513255415.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:35.331Z,1513255415.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:35.716Z,1513255415.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:35.812Z,1513255415.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:36.116Z,1513255416.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:36.139Z,1513255416.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:36.515Z,1513255416.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:36.574Z,1513255416.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:36.896Z,1513255416.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:36.922Z,1513255416.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:37.295Z,1513255417.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:37.343Z,1513255417.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:37.708Z,1513255417.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:37.724Z,1513255417.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:38.095Z,1513255418.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:38.127Z,1513255418.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:38.512Z,1513255418.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:38.527Z,1513255418.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:38.919Z,1513255418.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:38.934Z,1513255418.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:39.318Z,1513255419.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:39.333Z,1513255419.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:39.695Z,1513255419.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:39.721Z,1513255419.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:40.095Z,1513255420.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:40.127Z,1513255420.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:40.495Z,1513255420.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:40.519Z,1513255420.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:40.923Z,1513255420.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:40.938Z,1513255420.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:41.306Z,1513255421.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:41.328Z,1513255421.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:41.719Z,1513255421.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:41.734Z,1513255421.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:41.814Z,1513255421.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:42.135Z,1513255422.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:42.192Z,1513255422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:42.513Z,1513255422.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:42.543Z,1513255422.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:42.611Z,1513255422.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:42.897Z,1513255422.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:42.929Z,1513255422.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:43.077Z,1513255423.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:43.303Z,1513255423.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:43.318Z,1513255423.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:43.704Z,1513255423.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:43.724Z,1513255423.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:43.873Z,1513255423.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:44.105Z,1513255424.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:44.126Z,1513255424.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:44.513Z,1513255424.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:44.528Z,1513255424.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:44.649Z,1513255424.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:44.919Z,1513255424.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:44.939Z,1513255424.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:45.324Z,1513255425.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:45.343Z,1513255425.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:45.695Z,1513255425.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:45.756Z,1513255425.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:46.094Z,1513255426.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:46.127Z,1513255426.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:46.499Z,1513255426.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:46.526Z,1513255426.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:46.896Z,1513255426.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:46.931Z,1513255426.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:47.304Z,1513255427.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:47.334Z,1513255427.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:47.722Z,1513255427.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:47.737Z,1513255427.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:48.125Z,1513255428.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:48.140Z,1513255428.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:48.562Z,1513255428.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:48.587Z,1513255428.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:48.894Z,1513255428.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:48.932Z,1513255428.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:49.302Z,1513255429.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:49.329Z,1513255429.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:49.700Z,1513255429.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:49.728Z,1513255429.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:50.095Z,1513255430.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:50.131Z,1513255430.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:50.522Z,1513255430.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:50.544Z,1513255430.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:50.919Z,1513255430.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:50.934Z,1513255430.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:51.306Z,1513255431.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:51.338Z,1513255431.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:51.695Z,1513255431.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:51.753Z,1513255431.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:52.102Z,1513255432.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:52.116Z,1513255432.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:52.516Z,1513255432.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:52.541Z,1513255432.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:52.904Z,1513255432.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:52.943Z,1513255432.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:53.302Z,1513255433.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:53.338Z,1513255433.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:53.510Z,1513255433.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:53.714Z,1513255433.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:53.739Z,1513255433.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:54.113Z,1513255434.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:54.143Z,1513255434.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:54.305Z,1513255434.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:54.510Z,1513255434.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:54.543Z,1513255434.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:54.940Z,1513255434.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:54.999Z,1513255434.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:55.301Z,1513255435.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:55.316Z,1513255435.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:55.704Z,1513255435.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:55.718Z,1513255435.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:56.100Z,1513255436.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:56.120Z,1513255436.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:56.518Z,1513255436.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:56.532Z,1513255436.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:56.920Z,1513255436.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:56.951Z,1513255436.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:57.314Z,1513255437.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:57.343Z,1513255437.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:57.703Z,1513255437.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:57.744Z,1513255437.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:58.132Z,1513255438.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:58.163Z,1513255438.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:58.505Z,1513255438.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:58.520Z,1513255438.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:43:58.900Z,1513255438.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:43:58.958Z,1513255438.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:02.375Z,1513255442.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:02.389Z,1513255442.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:02.506Z,1513255442.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:02.563Z,1513255442.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:02.874Z,1513255442.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:02.911Z,1513255442.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:03.282Z,1513255443.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:03.316Z,1513255443.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:03.655Z,1513255443.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:03.674Z,1513255443.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:04.067Z,1513255444.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:04.087Z,1513255444.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:04.468Z,1513255444.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:04.483Z,1513255444.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:04.868Z,1513255444.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:04.891Z,1513255444.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:05.270Z,1513255445.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:05.284Z,1513255445.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:05.675Z,1513255445.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:05.690Z,1513255445.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:06.078Z,1513255446.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:06.093Z,1513255446.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:06.471Z,1513255446.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:06.491Z,1513255446.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:06.869Z,1513255446.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:06.884Z,1513255446.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:07.271Z,1513255447.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:07.287Z,1513255447.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:07.670Z,1513255447.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:07.760Z,1513255447.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:08.069Z,1513255448.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:08.085Z,1513255448.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:08.471Z,1513255448.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:08.492Z,1513255448.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:08.873Z,1513255448.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:08.888Z,1513255448.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:09.274Z,1513255449.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:09.289Z,1513255449.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:09.674Z,1513255449.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:09.689Z,1513255449.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:10.065Z,1513255450.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:10.092Z,1513255450.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:10.480Z,1513255450.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:10.503Z,1513255450.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:10.913Z,1513255450.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:10.972Z,1513255450.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:11.278Z,1513255451.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:11.303Z,1513255451.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:11.667Z,1513255451.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:11.703Z,1513255451.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:12.068Z,1513255452.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:12.087Z,1513255452.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:12.467Z,1513255452.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:12.483Z,1513255452.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:12.868Z,1513255452.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:12.883Z,1513255452.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:13.269Z,1513255453.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:13.283Z,1513255453.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:13.673Z,1513255453.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:13.688Z,1513255453.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:14.084Z,1513255454.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:14.125Z,1513255454.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:14.470Z,1513255454.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:14.485Z,1513255454.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:14.864Z,1513255454.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:14.893Z,1513255454.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:15.266Z,1513255455.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:15.285Z,1513255455.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:15.671Z,1513255455.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:15.686Z,1513255455.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:16.067Z,1513255456.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:16.083Z,1513255456.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:16.490Z,1513255456.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:16.525Z,1513255456.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:16.881Z,1513255456.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:16.904Z,1513255456.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:17.282Z,1513255457.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:17.297Z,1513255457.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:17.666Z,1513255457.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:17.681Z,1513255457.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:18.067Z,1513255458.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:18.087Z,1513255458.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:18.485Z,1513255458.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:18.514Z,1513255458.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:18.878Z,1513255458.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:18.913Z,1513255458.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:19.275Z,1513255459.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:19.291Z,1513255459.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:19.667Z,1513255459.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:19.682Z,1513255459.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:20.066Z,1513255460.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:20.091Z,1513255460.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:20.503Z,1513255460.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:20.523Z,1513255460.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:20.879Z,1513255460.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:20.894Z,1513255460.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:21.327Z,1513255461.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:21.347Z,1513255461.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:21.670Z,1513255461.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:21.738Z,1513255461.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:22.070Z,1513255462.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:22.085Z,1513255462.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:22.473Z,1513255462.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:22.538Z,1513255462.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:22.866Z,1513255462.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:22.893Z,1513255462.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:23.266Z,1513255463.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:23.281Z,1513255463.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:23.694Z,1513255463.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:23.768Z,1513255463.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:24.086Z,1513255464.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:24.116Z,1513255464.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:24.477Z,1513255464.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:24.520Z,1513255464.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:24.868Z,1513255464.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:24.902Z,1513255464.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:25.269Z,1513255465.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:25.284Z,1513255465.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:25.669Z,1513255465.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:25.684Z,1513255465.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:26.069Z,1513255466.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:26.084Z,1513255466.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:26.471Z,1513255466.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:26.486Z,1513255466.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:26.910Z,1513255466.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:26.934Z,1513255466.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:27.272Z,1513255467.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:27.287Z,1513255467.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:27.671Z,1513255467.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:27.687Z,1513255467.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:28.072Z,1513255468.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:28.087Z,1513255468.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:28.473Z,1513255468.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:28.488Z,1513255468.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:28.877Z,1513255468.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:28.895Z,1513255468.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:29.274Z,1513255469.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:29.288Z,1513255469.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:29.669Z,1513255469.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:29.684Z,1513255469.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:30.066Z,1513255470.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:30.100Z,1513255470.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:30.470Z,1513255470.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:30.504Z,1513255470.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:30.869Z,1513255470.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:30.896Z,1513255470.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:31.274Z,1513255471.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:31.304Z,1513255471.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:31.659Z,1513255471.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:31.673Z,1513255471.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:32.066Z,1513255472.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:32.102Z,1513255472.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:32.470Z,1513255472.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:32.499Z,1513255472.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:32.870Z,1513255472.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:32.919Z,1513255472.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:33.277Z,1513255473.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:33.303Z,1513255473.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:33.743Z,1513255473.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:33.768Z,1513255473.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:34.062Z,1513255474.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:34.091Z,1513255474.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:34.473Z,1513255474.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:34.495Z,1513255474.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:34.871Z,1513255474.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:34.891Z,1513255474.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:35.270Z,1513255475.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:35.286Z,1513255475.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:35.673Z,1513255475.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:35.688Z,1513255475.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:36.077Z,1513255476.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:36.093Z,1513255476.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:36.473Z,1513255476.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:36.491Z,1513255476.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:36.869Z,1513255476.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:36.884Z,1513255476.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:37.266Z,1513255477.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:37.287Z,1513255477.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:37.667Z,1513255477.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:37.688Z,1513255477.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:38.070Z,1513255478.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:38.085Z,1513255478.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:38.474Z,1513255478.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:38.489Z,1513255478.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:38.890Z,1513255478.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:38.904Z,1513255478.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:39.280Z,1513255479.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:39.295Z,1513255479.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:39.663Z,1513255479.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:39.690Z,1513255479.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:40.078Z,1513255480.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:40.095Z,1513255480.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:40.479Z,1513255480.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:40.494Z,1513255480.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:40.886Z,1513255480.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:40.907Z,1513255480.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:41.283Z,1513255481.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:41.298Z,1513255481.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:41.659Z,1513255481.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:41.687Z,1513255481.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:42.059Z,1513255482.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:42.095Z,1513255482.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:42.488Z,1513255482.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:42.508Z,1513255482.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:42.554Z,1513255482.554 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T12:44:42.554Z,1513255482.554 [DropWeight] No Fault, FailCount= 1
2017-12-14T12:44:42.882Z,1513255482.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:42.903Z,1513255482.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:43.284Z,1513255483.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:43.299Z,1513255483.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:43.659Z,1513255483.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:43.695Z,1513255483.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:44.059Z,1513255484.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:44.097Z,1513255484.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:44.482Z,1513255484.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:44.498Z,1513255484.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:44.881Z,1513255484.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:44.943Z,1513255484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:45.273Z,1513255485.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:45.300Z,1513255485.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:45.660Z,1513255485.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:45.675Z,1513255485.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:46.077Z,1513255486.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:46.127Z,1513255486.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:46.472Z,1513255486.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:46.488Z,1513255486.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:46.877Z,1513255486.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:46.910Z,1513255486.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:47.270Z,1513255487.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:47.284Z,1513255487.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:47.669Z,1513255487.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:47.683Z,1513255487.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:48.069Z,1513255488.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:48.077Z,1513255488.077 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:44:48.077Z,1513255488.077 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:44:48.077Z,1513255488.077 [BPC1](ERROR): Communications Fault
2017-12-14T12:44:48.085Z,1513255488.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:48.107Z,1513255488.107 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:44:48.490Z,1513255488.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:48.519Z,1513255488.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:48.877Z,1513255488.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:48.895Z,1513255488.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:49.272Z,1513255489.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:49.415Z,1513255489.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:49.448Z,1513255489.448 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:44:49.448Z,1513255489.448 [BPC1] No Fault, FailCount= 1
2017-12-14T12:44:49.669Z,1513255489.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:49.727Z,1513255489.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:50.073Z,1513255490.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:50.087Z,1513255490.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:50.478Z,1513255490.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:50.495Z,1513255490.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:50.880Z,1513255490.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:50.899Z,1513255490.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:51.284Z,1513255491.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:51.299Z,1513255491.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:51.672Z,1513255491.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:51.692Z,1513255491.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:52.059Z,1513255492.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:52.091Z,1513255492.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:52.484Z,1513255492.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:52.503Z,1513255492.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:52.902Z,1513255492.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:52.923Z,1513255492.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:53.275Z,1513255493.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:53.307Z,1513255493.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:53.669Z,1513255493.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:53.693Z,1513255493.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:54.068Z,1513255494.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:54.096Z,1513255494.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:54.498Z,1513255494.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:54.520Z,1513255494.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:54.882Z,1513255494.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:54.922Z,1513255494.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:55.286Z,1513255495.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:55.301Z,1513255495.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:55.659Z,1513255495.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:55.691Z,1513255495.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:56.059Z,1513255496.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:56.092Z,1513255496.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:56.459Z,1513255496.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:56.484Z,1513255496.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:56.859Z,1513255496.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:56.891Z,1513255496.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:57.263Z,1513255497.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:57.290Z,1513255497.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:57.674Z,1513255497.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:57.699Z,1513255497.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:57.704Z,1513255497.704 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:44:57.709Z,1513255497.709 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:44:57.709Z,1513255497.709 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:44:57.709Z,1513255497.709 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:44:58.086Z,1513255498.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:58.135Z,1513255498.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:58.138Z,1513255498.138 [Default:CheckIn:D] Stopped
2017-12-14T12:44:58.139Z,1513255498.139 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:44:58.469Z,1513255498.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:58.500Z,1513255498.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:58.503Z,1513255498.503 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 731.712500 min 
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn:E] Stopped
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn] Stopped
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn](INFO): Running loop #71
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn] Running Loop=71
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:44:58.504Z,1513255498.504 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:44:58.890Z,1513255498.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:58.915Z,1513255498.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:44:59.291Z,1513255499.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:44:59.306Z,1513255499.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:02.915Z,1513255502.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:02.950Z,1513255502.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:03.036Z,1513255503.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:03.051Z,1513255503.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:03.421Z,1513255503.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:03.455Z,1513255503.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:03.827Z,1513255503.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:03.852Z,1513255503.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:04.223Z,1513255504.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:04.248Z,1513255504.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:04.645Z,1513255504.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:04.678Z,1513255504.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:05.021Z,1513255505.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:05.036Z,1513255505.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:05.434Z,1513255505.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:05.455Z,1513255505.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:05.823Z,1513255505.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:05.848Z,1513255505.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:06.222Z,1513255506.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:06.245Z,1513255506.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:06.640Z,1513255506.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:06.684Z,1513255506.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:07.008Z,1513255507.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:07.158Z,1513255507.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:07.430Z,1513255507.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:07.445Z,1513255507.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:07.826Z,1513255507.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:07.854Z,1513255507.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:08.263Z,1513255508.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:08.304Z,1513255508.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:08.615Z,1513255508.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:08.649Z,1513255508.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:09.007Z,1513255509.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:09.047Z,1513255509.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:09.422Z,1513255509.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:09.448Z,1513255509.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:09.819Z,1513255509.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:09.891Z,1513255509.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:10.287Z,1513255510.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:10.359Z,1513255510.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:10.604Z,1513255510.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:10.628Z,1513255510.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:11.012Z,1513255511.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:11.019Z,1513255511.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-12-14T12:45:11.090Z,1513255511.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:11.415Z,1513255511.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:11.430Z,1513255511.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:11.816Z,1513255511.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:11.871Z,1513255511.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:12.236Z,1513255512.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:12.299Z,1513255512.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:12.632Z,1513255512.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:12.660Z,1513255512.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:13.033Z,1513255513.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:13.049Z,1513255513.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:13.431Z,1513255513.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:13.451Z,1513255513.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:13.806Z,1513255513.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:13.838Z,1513255513.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:14.249Z,1513255514.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:14.308Z,1513255514.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:14.622Z,1513255514.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:14.667Z,1513255514.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:15.016Z,1513255515.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:15.031Z,1513255515.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:15.409Z,1513255515.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:15.431Z,1513255515.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:15.816Z,1513255515.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:15.830Z,1513255515.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:16.216Z,1513255516.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:16.239Z,1513255516.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:16.628Z,1513255516.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:16.643Z,1513255516.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:16.999Z,1513255516.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:17.041Z,1513255517.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:17.405Z,1513255517.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:17.435Z,1513255517.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:17.837Z,1513255517.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:17.878Z,1513255517.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:18.204Z,1513255518.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:18.231Z,1513255518.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:18.654Z,1513255518.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:18.681Z,1513255518.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:19.034Z,1513255519.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:19.048Z,1513255519.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:19.417Z,1513255519.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:19.444Z,1513255519.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:19.809Z,1513255519.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:19.824Z,1513255519.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:20.205Z,1513255520.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:20.256Z,1513255520.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:20.641Z,1513255520.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:20.661Z,1513255520.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x31678 got:0x6591
2017-12-14T12:45:20.690Z,1513255520.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:21.033Z,1513255521.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:21.052Z,1513255521.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:21.422Z,1513255521.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:21.438Z,1513255521.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:21.832Z,1513255521.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:21.848Z,1513255521.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:22.254Z,1513255522.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:22.284Z,1513255522.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:22.611Z,1513255522.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:22.647Z,1513255522.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:23.026Z,1513255523.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:23.053Z,1513255523.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:23.404Z,1513255523.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:23.434Z,1513255523.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:23.823Z,1513255523.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:23.853Z,1513255523.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:24.298Z,1513255524.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:24.323Z,1513255524.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:24.616Z,1513255524.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:24.631Z,1513255524.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:25.006Z,1513255525.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:25.063Z,1513255525.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:25.421Z,1513255525.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:25.435Z,1513255525.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:25.821Z,1513255525.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:25.836Z,1513255525.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:26.278Z,1513255526.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:26.300Z,1513255526.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:26.615Z,1513255526.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:26.647Z,1513255526.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:27.030Z,1513255527.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:27.045Z,1513255527.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:27.417Z,1513255527.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:27.443Z,1513255527.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:27.812Z,1513255527.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:27.827Z,1513255527.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:28.360Z,1513255528.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:28.392Z,1513255528.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:28.608Z,1513255528.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:28.625Z,1513255528.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:29.004Z,1513255529.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:29.019Z,1513255529.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:29.404Z,1513255529.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:29.424Z,1513255529.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:29.825Z,1513255529.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:29.840Z,1513255529.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:30.223Z,1513255530.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:30.267Z,1513255530.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:30.643Z,1513255530.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:30.678Z,1513255530.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:31.013Z,1513255531.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:31.041Z,1513255531.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:31.403Z,1513255531.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:31.428Z,1513255531.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:31.813Z,1513255531.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:31.819Z,1513255531.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T12:45:31.850Z,1513255531.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:32.210Z,1513255532.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:32.225Z,1513255532.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:32.647Z,1513255532.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:32.711Z,1513255532.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:33.032Z,1513255533.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:33.056Z,1513255533.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:33.412Z,1513255533.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:33.440Z,1513255533.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:33.840Z,1513255533.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:33.903Z,1513255533.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:34.207Z,1513255534.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:34.233Z,1513255534.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:34.659Z,1513255534.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:34.711Z,1513255534.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:35.009Z,1513255535.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:35.043Z,1513255535.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:35.419Z,1513255535.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:35.451Z,1513255535.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:35.451Z,1513255535.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 244
2017-12-14T12:45:35.451Z,1513255535.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:45:35.457Z,1513255535.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:35.457Z,1513255535.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 244
2017-12-14T12:45:35.457Z,1513255535.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:45:35.459Z,1513255535.459 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:35.459Z,1513255535.459 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 244
2017-12-14T12:45:35.459Z,1513255535.459 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:45:35.480Z,1513255535.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:45:35.480Z,1513255535.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:45:35.480Z,1513255535.480 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:45:35.830Z,1513255535.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:35.861Z,1513255535.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:45:35.861Z,1513255535.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 244
2017-12-14T12:45:35.861Z,1513255535.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:45:35.861Z,1513255535.861 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 244
2017-12-14T12:45:35.862Z,1513255535.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:45:35.862Z,1513255535.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 244
2017-12-14T12:45:36.245Z,1513255536.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:36.307Z,1513255536.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:45:36.308Z,1513255536.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:45:36.308Z,1513255536.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:45:36.308Z,1513255536.308 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:45:36.309Z,1513255536.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:45:36.309Z,1513255536.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:45:36.310Z,1513255536.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:45:36.310Z,1513255536.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:45:36.310Z,1513255536.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:45:36.607Z,1513255536.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:36.640Z,1513255536.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:37.030Z,1513255537.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:37.062Z,1513255537.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:37.415Z,1513255537.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:37.431Z,1513255537.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:37.827Z,1513255537.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:37.847Z,1513255537.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:38.244Z,1513255538.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:38.299Z,1513255538.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:38.621Z,1513255538.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:38.653Z,1513255538.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:39.007Z,1513255539.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:39.040Z,1513255539.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:39.403Z,1513255539.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:39.450Z,1513255539.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:39.803Z,1513255539.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:39.815Z,1513255539.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x57981 got:0x51736
2017-12-14T12:45:39.846Z,1513255539.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:40.275Z,1513255540.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:40.327Z,1513255540.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:40.619Z,1513255540.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:40.634Z,1513255540.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:41.023Z,1513255541.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:41.038Z,1513255541.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:41.425Z,1513255541.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:41.440Z,1513255541.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:41.813Z,1513255541.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:41.832Z,1513255541.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:42.265Z,1513255542.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:42.295Z,1513255542.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:42.608Z,1513255542.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:42.643Z,1513255542.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:43.015Z,1513255543.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:43.072Z,1513255543.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:43.416Z,1513255543.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:43.431Z,1513255543.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:43.826Z,1513255543.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:43.849Z,1513255543.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:44.225Z,1513255544.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:44.240Z,1513255544.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:44.624Z,1513255544.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:44.648Z,1513255544.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:45.007Z,1513255545.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:45.039Z,1513255545.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:45.407Z,1513255545.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:45.433Z,1513255545.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:45.804Z,1513255545.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:45.840Z,1513255545.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:46.209Z,1513255546.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:46.237Z,1513255546.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:46.675Z,1513255546.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:46.716Z,1513255546.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:47.017Z,1513255547.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:47.036Z,1513255547.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:47.410Z,1513255547.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:47.432Z,1513255547.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:47.815Z,1513255547.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:47.832Z,1513255547.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:48.217Z,1513255548.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:48.232Z,1513255548.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:48.631Z,1513255548.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:48.662Z,1513255548.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:49.008Z,1513255549.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:49.032Z,1513255549.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:49.423Z,1513255549.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:49.439Z,1513255549.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:49.822Z,1513255549.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:49.838Z,1513255549.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:50.245Z,1513255550.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:50.302Z,1513255550.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:50.608Z,1513255550.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:50.651Z,1513255550.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:51.013Z,1513255551.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:51.049Z,1513255551.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:51.418Z,1513255551.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:51.451Z,1513255551.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:51.831Z,1513255551.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:51.852Z,1513255551.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:52.255Z,1513255552.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:52.306Z,1513255552.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:52.610Z,1513255552.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:52.632Z,1513255552.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:53.049Z,1513255553.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:53.071Z,1513255553.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:53.414Z,1513255553.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:53.429Z,1513255553.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:53.820Z,1513255553.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:53.875Z,1513255553.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:54.262Z,1513255554.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:54.286Z,1513255554.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:54.619Z,1513255554.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:54.640Z,1513255554.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:55.015Z,1513255555.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:55.031Z,1513255555.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:55.406Z,1513255555.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:55.478Z,1513255555.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:55.810Z,1513255555.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:55.836Z,1513255555.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:56.264Z,1513255556.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:56.319Z,1513255556.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:56.624Z,1513255556.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:56.641Z,1513255556.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:57.026Z,1513255557.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:57.071Z,1513255557.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:57.429Z,1513255557.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:57.444Z,1513255557.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:57.818Z,1513255557.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:57.833Z,1513255557.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:58.195Z,1513255558.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:58.235Z,1513255558.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:58.607Z,1513255558.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:58.632Z,1513255558.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:59.012Z,1513255559.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:59.040Z,1513255559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:45:59.406Z,1513255559.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:45:59.439Z,1513255559.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:02.924Z,1513255562.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:02.939Z,1513255562.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:03.046Z,1513255563.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:03.060Z,1513255563.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:03.402Z,1513255563.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:03.443Z,1513255563.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:03.796Z,1513255563.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:03.827Z,1513255563.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:04.233Z,1513255564.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:04.291Z,1513255564.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:04.596Z,1513255564.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:04.619Z,1513255564.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:05.000Z,1513255565.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:05.028Z,1513255565.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:05.381Z,1513255565.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:05.435Z,1513255565.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:05.813Z,1513255565.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:05.853Z,1513255565.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:06.257Z,1513255566.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:06.306Z,1513255566.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:06.611Z,1513255566.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:06.664Z,1513255566.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:06.996Z,1513255566.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:07.019Z,1513255567.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:07.404Z,1513255567.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:07.419Z,1513255567.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:07.807Z,1513255567.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:07.846Z,1513255567.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:08.207Z,1513255568.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:08.287Z,1513255568.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:08.614Z,1513255568.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:08.631Z,1513255568.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:09.043Z,1513255569.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:09.066Z,1513255569.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:09.407Z,1513255569.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:09.435Z,1513255569.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:09.795Z,1513255569.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:09.836Z,1513255569.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:10.186Z,1513255570.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:10.261Z,1513255570.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:10.594Z,1513255570.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:10.619Z,1513255570.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:11.007Z,1513255571.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:11.023Z,1513255571.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:11.380Z,1513255571.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:11.422Z,1513255571.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:11.808Z,1513255571.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:11.824Z,1513255571.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:12.219Z,1513255572.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:12.320Z,1513255572.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:12.622Z,1513255572.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:12.659Z,1513255572.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:12.000Z,1513255573.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:13.043Z,1513255573.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:13.406Z,1513255573.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:13.423Z,1513255573.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:13.802Z,1513255573.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:13.842Z,1513255573.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:14.198Z,1513255574.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:14.227Z,1513255574.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:14.650Z,1513255574.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:14.687Z,1513255574.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:15.019Z,1513255575.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:15.035Z,1513255575.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:15.414Z,1513255575.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:15.429Z,1513255575.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:15.806Z,1513255575.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:15.845Z,1513255575.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:16.195Z,1513255576.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:16.255Z,1513255576.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:16.648Z,1513255576.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:16.667Z,1513255576.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:17.004Z,1513255577.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:17.018Z,1513255577.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:17.410Z,1513255577.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:17.466Z,1513255577.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:17.840Z,1513255577.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:17.864Z,1513255577.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:18.266Z,1513255578.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:18.312Z,1513255578.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:18.619Z,1513255578.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:18.707Z,1513255578.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:19.016Z,1513255579.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:19.064Z,1513255579.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:19.420Z,1513255579.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:19.487Z,1513255579.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:19.820Z,1513255579.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:19.840Z,1513255579.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:20.260Z,1513255580.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:20.319Z,1513255580.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:20.617Z,1513255580.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:20.639Z,1513255580.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:20.991Z,1513255580.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:21.043Z,1513255581.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:21.420Z,1513255581.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:21.439Z,1513255581.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:21.789Z,1513255581.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:21.876Z,1513255581.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:22.191Z,1513255582.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:22.279Z,1513255582.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:22.616Z,1513255582.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:22.682Z,1513255582.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:23.031Z,1513255583.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:23.095Z,1513255583.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:23.406Z,1513255583.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:23.439Z,1513255583.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:23.818Z,1513255583.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:23.862Z,1513255583.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:24.202Z,1513255584.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:24.304Z,1513255584.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:24.602Z,1513255584.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:24.631Z,1513255584.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:25.025Z,1513255585.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:25.054Z,1513255585.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:25.430Z,1513255585.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:25.506Z,1513255585.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:25.801Z,1513255585.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:25.835Z,1513255585.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:26.278Z,1513255586.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:26.368Z,1513255586.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:26.620Z,1513255586.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:26.652Z,1513255586.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:27.028Z,1513255587.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:27.051Z,1513255587.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:27.399Z,1513255587.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:27.459Z,1513255587.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:27.822Z,1513255587.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:27.873Z,1513255587.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:28.199Z,1513255588.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:28.246Z,1513255588.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:28.688Z,1513255588.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:28.764Z,1513255588.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:29.011Z,1513255589.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:29.087Z,1513255589.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:29.400Z,1513255589.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:29.436Z,1513255589.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:29.788Z,1513255589.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:29.855Z,1513255589.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:30.193Z,1513255590.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:30.256Z,1513255590.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:30.629Z,1513255590.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:30.699Z,1513255590.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:31.016Z,1513255591.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:31.060Z,1513255591.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:31.411Z,1513255591.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:31.495Z,1513255591.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:31.808Z,1513255591.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:31.848Z,1513255591.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:32.272Z,1513255592.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:32.343Z,1513255592.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:32.597Z,1513255592.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:32.618Z,1513255592.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:33.005Z,1513255593.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:33.020Z,1513255593.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:33.406Z,1513255593.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:33.467Z,1513255593.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:33.812Z,1513255593.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:33.900Z,1513255593.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:34.227Z,1513255594.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:34.288Z,1513255594.288 [PNI_TCM](ERROR): CRC does not match. Expected:0x53068 got:0x23510
2017-12-14T12:46:34.319Z,1513255594.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:34.614Z,1513255594.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:34.661Z,1513255594.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:35.003Z,1513255595.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:35.039Z,1513255595.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:35.390Z,1513255595.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:35.456Z,1513255595.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:35.789Z,1513255595.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:35.843Z,1513255595.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:36.224Z,1513255596.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:36.300Z,1513255596.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:36.611Z,1513255596.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:36.635Z,1513255596.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:37.017Z,1513255597.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:37.062Z,1513255597.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:37.423Z,1513255597.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:37.461Z,1513255597.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:37.814Z,1513255597.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:37.849Z,1513255597.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:38.213Z,1513255598.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:38.304Z,1513255598.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:38.589Z,1513255598.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:38.699Z,1513255598.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:38.994Z,1513255598.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:39.050Z,1513255599.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:39.400Z,1513255599.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:39.471Z,1513255599.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:39.806Z,1513255599.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:39.902Z,1513255599.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:40.204Z,1513255600.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:40.243Z,1513255600.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:40.615Z,1513255600.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:40.621Z,1513255600.621 [PNI_TCM](ERROR): CRC does not match. Expected:0x29844 got:0x35335
2017-12-14T12:46:40.640Z,1513255600.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:41.022Z,1513255601.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:41.104Z,1513255601.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:41.404Z,1513255601.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:41.437Z,1513255601.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:41.796Z,1513255601.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:41.864Z,1513255601.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:42.188Z,1513255602.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:42.239Z,1513255602.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:42.628Z,1513255602.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:42.668Z,1513255602.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:43.007Z,1513255603.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:43.039Z,1513255603.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:43.415Z,1513255603.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:43.480Z,1513255603.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:43.793Z,1513255603.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:43.857Z,1513255603.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:44.201Z,1513255604.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:44.247Z,1513255604.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:44.662Z,1513255604.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:44.710Z,1513255604.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:44.987Z,1513255604.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:45.033Z,1513255605.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:45.398Z,1513255605.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:45.431Z,1513255605.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:45.817Z,1513255605.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:45.839Z,1513255605.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:46.197Z,1513255606.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:46.297Z,1513255606.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:46.595Z,1513255606.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:46.623Z,1513255606.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:47.007Z,1513255607.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:47.024Z,1513255607.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:47.389Z,1513255607.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:47.423Z,1513255607.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:47.810Z,1513255607.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:47.825Z,1513255607.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:48.245Z,1513255608.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:48.308Z,1513255608.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:48.643Z,1513255608.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:48.663Z,1513255608.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:48.987Z,1513255608.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:49.020Z,1513255609.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:49.402Z,1513255609.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:49.423Z,1513255609.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:49.802Z,1513255609.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:49.835Z,1513255609.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:50.186Z,1513255610.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:50.234Z,1513255610.234 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T12:46:50.291Z,1513255610.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:50.610Z,1513255610.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:50.644Z,1513255610.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:51.014Z,1513255611.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:51.039Z,1513255611.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:51.401Z,1513255611.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:51.439Z,1513255611.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:51.814Z,1513255611.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:51.850Z,1513255611.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:52.208Z,1513255612.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:52.322Z,1513255612.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:52.607Z,1513255612.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:52.627Z,1513255612.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:53.001Z,1513255613.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:53.048Z,1513255613.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:53.384Z,1513255613.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:53.417Z,1513255613.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:53.816Z,1513255613.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:53.831Z,1513255613.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:54.238Z,1513255614.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:54.283Z,1513255614.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:54.612Z,1513255614.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:54.632Z,1513255614.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:55.024Z,1513255615.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:55.071Z,1513255615.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:55.415Z,1513255615.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:55.430Z,1513255615.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:55.797Z,1513255615.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:55.821Z,1513255615.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:56.202Z,1513255616.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:56.235Z,1513255616.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:56.651Z,1513255616.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:56.691Z,1513255616.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:57.006Z,1513255617.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:57.027Z,1513255617.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:57.412Z,1513255617.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:57.431Z,1513255617.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:57.801Z,1513255617.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:57.847Z,1513255617.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:58.249Z,1513255618.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:58.289Z,1513255618.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:58.663Z,1513255618.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:58.678Z,1513255618.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:58.991Z,1513255618.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:59.027Z,1513255619.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:59.423Z,1513255619.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:59.459Z,1513255619.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:46:59.823Z,1513255619.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:46:59.838Z,1513255619.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:03.443Z,1513255623.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:03.532Z,1513255623.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:03.621Z,1513255623.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:03.656Z,1513255623.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:04.003Z,1513255624.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:04.035Z,1513255624.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:04.425Z,1513255624.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:04.471Z,1513255624.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:04.825Z,1513255624.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:04.840Z,1513255624.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:05.199Z,1513255625.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:05.267Z,1513255625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:05.622Z,1513255625.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:05.637Z,1513255625.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:06.013Z,1513255626.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:06.047Z,1513255626.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:06.410Z,1513255626.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:06.432Z,1513255626.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:06.807Z,1513255626.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:06.822Z,1513255626.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:07.201Z,1513255627.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:07.216Z,1513255627.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:07.608Z,1513255627.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:07.645Z,1513255627.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:08.005Z,1513255628.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:08.019Z,1513255628.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:08.414Z,1513255628.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:08.445Z,1513255628.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:08.816Z,1513255628.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:08.846Z,1513255628.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:09.216Z,1513255629.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:09.251Z,1513255629.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:09.600Z,1513255629.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:09.631Z,1513255629.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:10.009Z,1513255630.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:10.025Z,1513255630.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:10.404Z,1513255630.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:10.418Z,1513255630.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:10.834Z,1513255630.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:10.866Z,1513255630.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:11.252Z,1513255631.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:11.267Z,1513255631.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:11.622Z,1513255631.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:11.636Z,1513255631.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:11.996Z,1513255631.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:12.022Z,1513255632.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:12.408Z,1513255632.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:12.427Z,1513255632.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:12.810Z,1513255632.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:12.842Z,1513255632.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:13.194Z,1513255633.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:13.220Z,1513255633.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:13.618Z,1513255633.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:13.670Z,1513255633.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:14.020Z,1513255634.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:14.039Z,1513255634.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:14.414Z,1513255634.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:14.436Z,1513255634.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:14.799Z,1513255634.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:14.831Z,1513255634.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:15.200Z,1513255635.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:15.227Z,1513255635.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:15.638Z,1513255635.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:15.669Z,1513255635.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:16.003Z,1513255636.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:16.035Z,1513255636.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:16.430Z,1513255636.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:16.446Z,1513255636.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:16.822Z,1513255636.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:16.837Z,1513255636.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:17.227Z,1513255637.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:17.254Z,1513255637.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:17.600Z,1513255637.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:17.632Z,1513255637.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:18.005Z,1513255638.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:18.039Z,1513255638.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:18.400Z,1513255638.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:18.474Z,1513255638.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:18.823Z,1513255638.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:18.839Z,1513255638.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:19.222Z,1513255639.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:19.237Z,1513255639.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:19.618Z,1513255639.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:19.637Z,1513255639.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:19.000Z,1513255640.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:20.037Z,1513255640.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:20.442Z,1513255640.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:20.479Z,1513255640.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:20.799Z,1513255640.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:20.838Z,1513255640.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:21.258Z,1513255641.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:21.292Z,1513255641.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:21.612Z,1513255641.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:21.647Z,1513255641.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:22.020Z,1513255642.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:22.061Z,1513255642.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:22.423Z,1513255642.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:22.463Z,1513255642.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:22.808Z,1513255642.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:22.825Z,1513255642.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:23.204Z,1513255643.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:23.220Z,1513255643.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:23.634Z,1513255643.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:23.680Z,1513255643.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:23.999Z,1513255643.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:24.067Z,1513255644.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:24.413Z,1513255644.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:24.443Z,1513255644.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:24.812Z,1513255644.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:24.894Z,1513255644.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:25.217Z,1513255645.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:25.239Z,1513255645.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:25.612Z,1513255645.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:25.628Z,1513255645.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:25.999Z,1513255645.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:26.045Z,1513255646.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:26.418Z,1513255646.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:26.433Z,1513255646.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:26.877Z,1513255646.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:26.955Z,1513255646.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:27.225Z,1513255647.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:27.243Z,1513255647.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:27.598Z,1513255647.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:27.655Z,1513255647.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:27.000Z,1513255648.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:28.028Z,1513255648.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:28.399Z,1513255648.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:28.435Z,1513255648.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:28.823Z,1513255648.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:28.839Z,1513255648.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:29.223Z,1513255649.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:29.243Z,1513255649.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:29.628Z,1513255649.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:29.642Z,1513255649.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:30.044Z,1513255650.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:30.080Z,1513255650.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:30.415Z,1513255650.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:30.431Z,1513255650.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:30.811Z,1513255650.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:30.826Z,1513255650.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:31.209Z,1513255651.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:31.224Z,1513255651.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:31.613Z,1513255651.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:31.628Z,1513255651.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:32.017Z,1513255652.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:32.031Z,1513255652.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:32.413Z,1513255652.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:32.428Z,1513255652.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:32.810Z,1513255652.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:32.826Z,1513255652.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:33.244Z,1513255653.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:33.287Z,1513255653.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:33.608Z,1513255653.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:33.623Z,1513255653.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:34.048Z,1513255654.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:34.066Z,1513255654.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:34.418Z,1513255654.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:34.433Z,1513255654.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:34.818Z,1513255654.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:34.839Z,1513255654.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:35.218Z,1513255655.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:35.232Z,1513255655.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:35.617Z,1513255655.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:35.631Z,1513255655.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:36.012Z,1513255656.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:36.070Z,1513255656.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:36.439Z,1513255656.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:36.472Z,1513255656.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:36.821Z,1513255656.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:36.836Z,1513255656.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:37.213Z,1513255657.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:37.228Z,1513255657.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:37.618Z,1513255657.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:37.633Z,1513255657.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:38.020Z,1513255658.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:38.040Z,1513255658.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:38.420Z,1513255658.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:38.435Z,1513255658.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:38.805Z,1513255658.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:38.835Z,1513255658.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:39.212Z,1513255659.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:39.226Z,1513255659.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:39.619Z,1513255659.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:39.647Z,1513255659.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:39.999Z,1513255659.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:40.026Z,1513255660.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:40.399Z,1513255660.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:40.425Z,1513255660.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:40.778Z,1513255660.778 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:47:40.778Z,1513255660.778 [NAL9602] Data Fault, FailCount= 2
2017-12-14T12:47:40.779Z,1513255660.779 [NAL9602](ERROR): Data Fault
2017-12-14T12:47:40.796Z,1513255660.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:40.835Z,1513255660.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:40.848Z,1513255660.848 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:47:41.190Z,1513255661.190 [NAL9602](INFO): Powering down
2017-12-14T12:47:41.223Z,1513255661.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:41.239Z,1513255661.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:41.599Z,1513255661.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:41.625Z,1513255661.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:42.002Z,1513255662.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:42.030Z,1513255662.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:42.044Z,1513255662.044 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:47:42.044Z,1513255662.044 [NAL9602] No Fault, FailCount= 2
2017-12-14T12:47:42.398Z,1513255662.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:42.423Z,1513255662.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:42.799Z,1513255662.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:42.824Z,1513255662.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:43.210Z,1513255663.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:43.236Z,1513255663.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:43.599Z,1513255663.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:43.635Z,1513255663.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:43.999Z,1513255663.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:44.039Z,1513255664.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:44.398Z,1513255664.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:44.433Z,1513255664.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:44.798Z,1513255664.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:44.813Z,1513255664.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:45.203Z,1513255665.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:45.239Z,1513255665.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:45.606Z,1513255665.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:45.647Z,1513255665.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:46.073Z,1513255666.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:46.107Z,1513255666.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:46.399Z,1513255666.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:46.455Z,1513255666.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:46.798Z,1513255666.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:46.830Z,1513255666.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:47.202Z,1513255667.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:47.210Z,1513255667.210 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T12:47:47.211Z,1513255667.211 [BPC1] Data Fault, FailCount= 1
2017-12-14T12:47:47.211Z,1513255667.211 [BPC1](ERROR): Data Fault
2017-12-14T12:47:47.253Z,1513255667.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:47.278Z,1513255667.278 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T12:47:47.603Z,1513255667.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:47.639Z,1513255667.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:47.998Z,1513255667.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:48.013Z,1513255668.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:48.406Z,1513255668.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:48.433Z,1513255668.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:48.446Z,1513255668.446 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:47:48.446Z,1513255668.446 [BPC1] No Fault, FailCount= 1
2017-12-14T12:47:48.814Z,1513255668.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:48.891Z,1513255668.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:49.247Z,1513255669.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:49.266Z,1513255669.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:49.608Z,1513255669.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:49.623Z,1513255669.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:50.006Z,1513255670.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:50.021Z,1513255670.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:50.407Z,1513255670.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:50.422Z,1513255670.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:50.800Z,1513255670.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:50.890Z,1513255670.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:51.205Z,1513255671.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:51.220Z,1513255671.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:51.607Z,1513255671.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:51.622Z,1513255671.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:52.007Z,1513255672.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:52.035Z,1513255672.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:52.436Z,1513255672.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:52.466Z,1513255672.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:52.798Z,1513255672.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:52.835Z,1513255672.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:53.203Z,1513255673.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:53.217Z,1513255673.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:53.604Z,1513255673.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:53.639Z,1513255673.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:54.007Z,1513255674.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:54.023Z,1513255674.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:54.403Z,1513255674.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:54.417Z,1513255674.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:54.812Z,1513255674.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:54.848Z,1513255674.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:55.205Z,1513255675.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:55.221Z,1513255675.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:55.607Z,1513255675.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:55.622Z,1513255675.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:55.999Z,1513255675.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:56.028Z,1513255676.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:56.399Z,1513255676.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:56.426Z,1513255676.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:56.798Z,1513255676.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:56.831Z,1513255676.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:57.202Z,1513255677.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:57.266Z,1513255677.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:57.598Z,1513255677.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:57.631Z,1513255677.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:58.002Z,1513255678.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:58.029Z,1513255678.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:58.399Z,1513255678.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:58.432Z,1513255678.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:58.799Z,1513255678.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:58.824Z,1513255678.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:59.198Z,1513255679.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:59.235Z,1513255679.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:47:59.603Z,1513255679.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:47:59.633Z,1513255679.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:00.003Z,1513255680.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:00.034Z,1513255680.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:03.489Z,1513255683.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:03.554Z,1513255683.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:03.647Z,1513255683.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:03.690Z,1513255683.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:04.010Z,1513255684.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:04.037Z,1513255684.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:04.410Z,1513255684.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:04.441Z,1513255684.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:04.811Z,1513255684.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:04.836Z,1513255684.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:05.228Z,1513255685.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:05.251Z,1513255685.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:05.607Z,1513255685.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:05.643Z,1513255685.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:06.010Z,1513255686.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:06.043Z,1513255686.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:06.407Z,1513255686.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:06.439Z,1513255686.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:06.807Z,1513255686.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:06.842Z,1513255686.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:07.211Z,1513255687.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:07.237Z,1513255687.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:07.608Z,1513255687.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:07.643Z,1513255687.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:08.012Z,1513255688.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:08.038Z,1513255688.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:08.431Z,1513255688.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:08.455Z,1513255688.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:08.816Z,1513255688.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:08.830Z,1513255688.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:09.217Z,1513255689.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:09.232Z,1513255689.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:09.613Z,1513255689.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:09.670Z,1513255689.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:10.017Z,1513255690.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:10.032Z,1513255690.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:10.415Z,1513255690.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:10.430Z,1513255690.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:10.810Z,1513255690.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:10.862Z,1513255690.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:11.200Z,1513255691.200 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:48:11.217Z,1513255691.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:11.240Z,1513255691.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:11.609Z,1513255691.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:11.657Z,1513255691.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:12.016Z,1513255692.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:12.031Z,1513255692.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:12.412Z,1513255692.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:12.440Z,1513255692.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:12.815Z,1513255692.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:12.835Z,1513255692.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:13.216Z,1513255693.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:13.232Z,1513255693.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:13.616Z,1513255693.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:13.630Z,1513255693.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:14.017Z,1513255694.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:14.031Z,1513255694.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:14.410Z,1513255694.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:14.425Z,1513255694.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:14.815Z,1513255694.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:14.853Z,1513255694.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:15.214Z,1513255695.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:15.229Z,1513255695.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:15.614Z,1513255695.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:15.629Z,1513255695.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:16.018Z,1513255696.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:16.033Z,1513255696.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:16.411Z,1513255696.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:16.438Z,1513255696.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:16.814Z,1513255696.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:16.828Z,1513255696.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:17.217Z,1513255697.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:17.231Z,1513255697.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:17.614Z,1513255697.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:17.630Z,1513255697.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:18.016Z,1513255698.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:18.036Z,1513255698.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:18.406Z,1513255698.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:18.431Z,1513255698.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:18.811Z,1513255698.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:18.836Z,1513255698.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:19.211Z,1513255699.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:19.237Z,1513255699.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:19.607Z,1513255699.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:19.634Z,1513255699.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:19.000Z,1513255700.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:20.052Z,1513255700.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:20.411Z,1513255700.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:20.444Z,1513255700.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:20.806Z,1513255700.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:20.842Z,1513255700.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:21.269Z,1513255701.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:21.346Z,1513255701.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:21.618Z,1513255701.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:21.644Z,1513255701.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:21.991Z,1513255701.991 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:48:22.008Z,1513255702.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:22.039Z,1513255702.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:22.410Z,1513255702.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:22.450Z,1513255702.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:22.821Z,1513255702.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:22.855Z,1513255702.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:23.222Z,1513255703.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:23.259Z,1513255703.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:23.621Z,1513255703.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:23.646Z,1513255703.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:24.008Z,1513255704.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:24.023Z,1513255704.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:24.412Z,1513255704.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:24.456Z,1513255704.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:24.815Z,1513255704.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:24.835Z,1513255704.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:25.218Z,1513255705.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:25.233Z,1513255705.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:25.621Z,1513255705.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:25.636Z,1513255705.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:26.021Z,1513255706.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:26.035Z,1513255706.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:26.424Z,1513255706.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:26.451Z,1513255706.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:26.811Z,1513255706.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:26.833Z,1513255706.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:27.216Z,1513255707.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:27.235Z,1513255707.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:27.643Z,1513255707.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:27.675Z,1513255707.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:28.032Z,1513255708.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:28.047Z,1513255708.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:28.428Z,1513255708.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:28.443Z,1513255708.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:28.830Z,1513255708.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:28.851Z,1513255708.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:29.229Z,1513255709.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:29.252Z,1513255709.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:29.608Z,1513255709.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:29.634Z,1513255709.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:30.023Z,1513255710.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:30.038Z,1513255710.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:30.408Z,1513255710.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:30.436Z,1513255710.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:30.828Z,1513255710.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:30.868Z,1513255710.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:31.224Z,1513255711.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:31.248Z,1513255711.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:31.626Z,1513255711.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:31.648Z,1513255711.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:32.016Z,1513255712.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:32.090Z,1513255712.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:32.408Z,1513255712.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:32.444Z,1513255712.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:32.810Z,1513255712.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:32.859Z,1513255712.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:33.248Z,1513255713.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:33.290Z,1513255713.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:33.628Z,1513255713.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:33.683Z,1513255713.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:34.031Z,1513255714.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:34.059Z,1513255714.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:34.434Z,1513255714.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:34.450Z,1513255714.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:34.808Z,1513255714.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:34.824Z,1513255714.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:35.211Z,1513255715.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:35.231Z,1513255715.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:35.615Z,1513255715.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:35.630Z,1513255715.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:36.023Z,1513255716.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:36.058Z,1513255716.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:36.412Z,1513255716.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:36.435Z,1513255716.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:36.435Z,1513255716.435 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 245
2017-12-14T12:48:36.435Z,1513255716.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:48:36.441Z,1513255716.441 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:36.441Z,1513255716.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 245
2017-12-14T12:48:36.441Z,1513255716.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:48:36.443Z,1513255716.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:36.443Z,1513255716.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 245
2017-12-14T12:48:36.443Z,1513255716.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:48:36.464Z,1513255716.464 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:48:36.464Z,1513255716.464 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:48:36.464Z,1513255716.464 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:48:36.886Z,1513255716.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:37.030Z,1513255717.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:48:37.030Z,1513255717.030 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 245
2017-12-14T12:48:37.030Z,1513255717.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:48:37.030Z,1513255717.030 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 245
2017-12-14T12:48:37.031Z,1513255717.031 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:48:37.031Z,1513255717.031 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 245
2017-12-14T12:48:37.253Z,1513255717.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:37.274Z,1513255717.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:48:37.274Z,1513255717.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:48:37.275Z,1513255717.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:48:37.275Z,1513255717.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:48:37.276Z,1513255717.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:48:37.276Z,1513255717.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:48:37.276Z,1513255717.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:48:37.281Z,1513255717.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:48:37.281Z,1513255717.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:48:37.629Z,1513255717.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:37.645Z,1513255717.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:38.011Z,1513255718.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:38.035Z,1513255718.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:38.407Z,1513255718.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:38.434Z,1513255718.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:38.828Z,1513255718.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:38.847Z,1513255718.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:39.211Z,1513255719.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:39.243Z,1513255719.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:39.624Z,1513255719.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:39.647Z,1513255719.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:40.033Z,1513255720.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:40.049Z,1513255720.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:40.425Z,1513255720.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:40.485Z,1513255720.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:40.807Z,1513255720.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:40.835Z,1513255720.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:41.210Z,1513255721.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:41.236Z,1513255721.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:41.608Z,1513255721.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:41.634Z,1513255721.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:42.008Z,1513255722.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:42.063Z,1513255722.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:42.407Z,1513255722.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:42.432Z,1513255722.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:42.833Z,1513255722.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:42.864Z,1513255722.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:43.225Z,1513255723.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:43.255Z,1513255723.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:43.668Z,1513255723.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:43.709Z,1513255723.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:44.016Z,1513255724.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:44.032Z,1513255724.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:44.410Z,1513255724.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:44.425Z,1513255724.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:44.815Z,1513255724.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:44.835Z,1513255724.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:45.217Z,1513255725.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:45.231Z,1513255725.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:45.619Z,1513255725.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:45.639Z,1513255725.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:46.023Z,1513255726.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:46.059Z,1513255726.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:46.417Z,1513255726.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:46.433Z,1513255726.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:46.824Z,1513255726.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:46.872Z,1513255726.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:47.215Z,1513255727.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:47.235Z,1513255727.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:47.616Z,1513255727.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:47.631Z,1513255727.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:48.021Z,1513255728.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:48.036Z,1513255728.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:48.416Z,1513255728.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:48.432Z,1513255728.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:48.820Z,1513255728.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:48.843Z,1513255728.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:49.225Z,1513255729.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:49.240Z,1513255729.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:49.622Z,1513255729.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:49.637Z,1513255729.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:50.043Z,1513255730.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:50.076Z,1513255730.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:50.423Z,1513255730.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:50.438Z,1513255730.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:50.816Z,1513255730.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:50.831Z,1513255730.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:51.215Z,1513255731.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:51.230Z,1513255731.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:51.625Z,1513255731.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:51.641Z,1513255731.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:52.026Z,1513255732.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:52.047Z,1513255732.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:52.426Z,1513255732.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:52.447Z,1513255732.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:52.808Z,1513255732.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:52.843Z,1513255732.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:53.248Z,1513255733.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:53.297Z,1513255733.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:53.607Z,1513255733.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:53.687Z,1513255733.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:54.062Z,1513255734.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:54.109Z,1513255734.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:54.423Z,1513255734.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:54.451Z,1513255734.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:54.822Z,1513255734.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:54.892Z,1513255734.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:55.221Z,1513255735.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:55.246Z,1513255735.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:55.637Z,1513255735.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:55.691Z,1513255735.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:56.015Z,1513255736.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:56.044Z,1513255736.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:56.447Z,1513255736.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:56.475Z,1513255736.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:56.815Z,1513255736.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:56.833Z,1513255736.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:57.219Z,1513255737.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:57.234Z,1513255737.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:57.622Z,1513255737.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:57.637Z,1513255737.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:58.022Z,1513255738.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:58.043Z,1513255738.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:58.420Z,1513255738.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:58.443Z,1513255738.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:58.816Z,1513255738.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:58.831Z,1513255738.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:59.216Z,1513255739.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:59.235Z,1513255739.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:48:59.660Z,1513255739.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:48:59.691Z,1513255739.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:00.022Z,1513255740.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:00.037Z,1513255740.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:03.526Z,1513255743.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:03.548Z,1513255743.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:03.672Z,1513255743.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:03.731Z,1513255743.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:04.046Z,1513255744.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:04.076Z,1513255744.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:04.439Z,1513255744.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:04.472Z,1513255744.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:04.834Z,1513255744.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:04.871Z,1513255744.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:05.234Z,1513255745.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:05.255Z,1513255745.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:05.645Z,1513255745.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:05.660Z,1513255745.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:06.044Z,1513255746.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:06.086Z,1513255746.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:06.442Z,1513255746.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:06.457Z,1513255746.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:06.834Z,1513255746.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:06.849Z,1513255746.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:07.236Z,1513255747.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:07.251Z,1513255747.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:07.634Z,1513255747.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:07.663Z,1513255747.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:08.036Z,1513255748.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:08.056Z,1513255748.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:08.437Z,1513255748.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:08.452Z,1513255748.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:08.842Z,1513255748.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:08.859Z,1513255748.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:09.248Z,1513255749.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:09.267Z,1513255749.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:09.645Z,1513255749.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:09.660Z,1513255749.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:10.039Z,1513255750.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:10.250Z,1513255750.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:10.430Z,1513255750.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:10.452Z,1513255750.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:10.831Z,1513255750.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:10.855Z,1513255750.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:11.237Z,1513255751.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:11.255Z,1513255751.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:11.646Z,1513255751.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:11.663Z,1513255751.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:12.049Z,1513255752.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:12.065Z,1513255752.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:12.451Z,1513255752.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:12.466Z,1513255752.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:12.837Z,1513255752.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:12.854Z,1513255752.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:13.237Z,1513255753.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:13.252Z,1513255753.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:13.634Z,1513255753.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:13.656Z,1513255753.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:14.120Z,1513255754.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:14.142Z,1513255754.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:14.433Z,1513255754.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:14.456Z,1513255754.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:14.853Z,1513255754.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:14.868Z,1513255754.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:15.249Z,1513255755.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:15.264Z,1513255755.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:15.649Z,1513255755.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:15.734Z,1513255755.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:16.027Z,1513255756.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:16.052Z,1513255756.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:16.427Z,1513255756.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:16.452Z,1513255756.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:16.827Z,1513255756.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:16.893Z,1513255756.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:16.908Z,1513255756.908 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:49:17.228Z,1513255757.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:17.254Z,1513255757.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:17.652Z,1513255757.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:17.703Z,1513255757.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:18.051Z,1513255758.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:18.066Z,1513255758.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:18.448Z,1513255758.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:18.475Z,1513255758.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:18.827Z,1513255758.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:18.867Z,1513255758.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:19.227Z,1513255759.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:19.241Z,1513255759.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:19.631Z,1513255759.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:19.646Z,1513255759.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:20.036Z,1513255760.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:20.055Z,1513255760.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:20.438Z,1513255760.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:20.453Z,1513255760.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:20.845Z,1513255760.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:20.860Z,1513255760.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:21.249Z,1513255761.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:21.264Z,1513255761.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:21.641Z,1513255761.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:21.656Z,1513255761.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:22.041Z,1513255762.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:22.055Z,1513255762.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:22.444Z,1513255762.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:22.479Z,1513255762.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:22.851Z,1513255762.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:22.866Z,1513255762.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:23.250Z,1513255763.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:23.266Z,1513255763.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:23.640Z,1513255763.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:23.655Z,1513255763.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:24.027Z,1513255764.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:24.054Z,1513255764.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:24.447Z,1513255764.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:24.462Z,1513255764.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:24.862Z,1513255764.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:24.876Z,1513255764.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:25.245Z,1513255765.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:25.268Z,1513255765.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:25.631Z,1513255765.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:25.706Z,1513255765.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:26.028Z,1513255766.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:26.094Z,1513255766.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:26.427Z,1513255766.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:26.459Z,1513255766.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:26.849Z,1513255766.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:26.868Z,1513255766.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:27.252Z,1513255767.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:27.271Z,1513255767.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:27.652Z,1513255767.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:27.667Z,1513255767.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:28.027Z,1513255768.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:28.052Z,1513255768.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:28.427Z,1513255768.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:28.452Z,1513255768.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:28.863Z,1513255768.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:28.898Z,1513255768.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:29.233Z,1513255769.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:29.247Z,1513255769.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:29.642Z,1513255769.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:29.667Z,1513255769.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:30.057Z,1513255770.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:30.072Z,1513255770.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:30.445Z,1513255770.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:30.468Z,1513255770.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:30.838Z,1513255770.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:30.887Z,1513255770.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:31.227Z,1513255771.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:31.255Z,1513255771.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:31.628Z,1513255771.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:31.664Z,1513255771.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:32.044Z,1513255772.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:32.091Z,1513255772.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:32.426Z,1513255772.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:32.464Z,1513255772.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:32.848Z,1513255772.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:32.868Z,1513255772.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:33.253Z,1513255773.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:33.268Z,1513255773.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:33.645Z,1513255773.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:33.666Z,1513255773.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:34.031Z,1513255774.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:34.063Z,1513255774.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:34.428Z,1513255774.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:34.463Z,1513255774.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:34.828Z,1513255774.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:34.868Z,1513255774.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:35.255Z,1513255775.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:35.276Z,1513255775.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:35.649Z,1513255775.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:35.669Z,1513255775.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:36.054Z,1513255776.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:36.069Z,1513255776.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:36.455Z,1513255776.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:36.470Z,1513255776.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:36.832Z,1513255776.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:36.863Z,1513255776.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:37.231Z,1513255777.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:37.266Z,1513255777.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:37.631Z,1513255777.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:37.667Z,1513255777.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:38.035Z,1513255778.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:38.111Z,1513255778.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:38.464Z,1513255778.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:38.495Z,1513255778.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:38.857Z,1513255778.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:38.929Z,1513255778.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:39.250Z,1513255779.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:39.279Z,1513255779.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:39.634Z,1513255779.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:39.685Z,1513255779.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:40.036Z,1513255780.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:40.050Z,1513255780.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:40.443Z,1513255780.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:40.479Z,1513255780.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:40.853Z,1513255780.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:40.884Z,1513255780.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:41.256Z,1513255781.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:41.270Z,1513255781.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:41.658Z,1513255781.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:41.690Z,1513255781.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:42.034Z,1513255782.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:42.068Z,1513255782.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:42.431Z,1513255782.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:42.460Z,1513255782.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:42.838Z,1513255782.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:42.853Z,1513255782.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:43.238Z,1513255783.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:43.252Z,1513255783.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:43.646Z,1513255783.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:43.678Z,1513255783.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:44.046Z,1513255784.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:44.080Z,1513255784.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:44.446Z,1513255784.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:44.469Z,1513255784.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:44.836Z,1513255784.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:44.935Z,1513255784.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:45.236Z,1513255785.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:45.251Z,1513255785.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:45.638Z,1513255785.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:45.653Z,1513255785.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:46.038Z,1513255786.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:46.052Z,1513255786.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:46.435Z,1513255786.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:46.459Z,1513255786.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:46.843Z,1513255786.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:46.858Z,1513255786.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:47.246Z,1513255787.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:47.260Z,1513255787.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:47.635Z,1513255787.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:47.650Z,1513255787.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:48.067Z,1513255788.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:48.141Z,1513255788.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:48.427Z,1513255788.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:48.467Z,1513255788.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:48.858Z,1513255788.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:48.873Z,1513255788.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:49.254Z,1513255789.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:49.269Z,1513255789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:49.652Z,1513255789.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:49.668Z,1513255789.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:50.031Z,1513255790.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:50.064Z,1513255790.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:50.427Z,1513255790.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:50.463Z,1513255790.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:50.834Z,1513255790.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:50.868Z,1513255790.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:51.227Z,1513255791.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:51.255Z,1513255791.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:51.637Z,1513255791.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:51.668Z,1513255791.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:52.041Z,1513255792.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:52.072Z,1513255792.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:52.438Z,1513255792.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:52.471Z,1513255792.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:52.842Z,1513255792.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:52.907Z,1513255792.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:53.228Z,1513255793.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:53.242Z,1513255793.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:53.628Z,1513255793.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:53.644Z,1513255793.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:54.031Z,1513255794.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:54.046Z,1513255794.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:54.461Z,1513255794.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:54.498Z,1513255794.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:54.849Z,1513255794.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:54.873Z,1513255794.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:55.245Z,1513255795.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:55.268Z,1513255795.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:55.637Z,1513255795.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:55.652Z,1513255795.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:56.036Z,1513255796.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:56.052Z,1513255796.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:56.449Z,1513255796.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:56.480Z,1513255796.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:56.841Z,1513255796.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:56.855Z,1513255796.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:57.242Z,1513255797.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:57.256Z,1513255797.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:57.664Z,1513255797.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:57.700Z,1513255797.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:58.044Z,1513255798.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:58.060Z,1513255798.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:58.442Z,1513255798.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:58.457Z,1513255798.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:58.842Z,1513255798.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:58.856Z,1513255798.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:49:58.860Z,1513255798.860 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:44:58.5Z
2017-12-14T12:49:58.860Z,1513255798.860 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T12:49:58.860Z,1513255798.860 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T12:49:59.242Z,1513255799.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:49:59.257Z,1513255799.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:00.019Z,1513255800.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:00.095Z,1513255800.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:00.180Z,1513255800.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:00.222Z,1513255800.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:03.736Z,1513255803.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:03.772Z,1513255803.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:04.511Z,1513255804.511 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0284.lzma
2017-12-14T12:50:04.560Z,1513255804.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:04.607Z,1513255804.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:04.696Z,1513255804.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:04.715Z,1513255804.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:05.066Z,1513255805.066 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0284.lzma.bak
2017-12-14T12:50:05.066Z,1513255805.066 [DataOverHttps](INFO): SBD MOMSN=5438740
2017-12-14T12:50:05.089Z,1513255805.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:05.133Z,1513255805.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:06.299Z,1513255806.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:06.366Z,1513255806.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:06.473Z,1513255806.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:06.512Z,1513255806.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:09.919Z,1513255809.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:09.978Z,1513255809.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:10.081Z,1513255810.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:10.119Z,1513255810.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:10.442Z,1513255810.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:10.473Z,1513255810.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:10.838Z,1513255810.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:10.874Z,1513255810.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:11.241Z,1513255811.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:11.256Z,1513255811.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:11.642Z,1513255811.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:11.656Z,1513255811.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:15.118Z,1513255815.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:15.141Z,1513255815.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:15.217Z,1513255815.217 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0285.lzma
2017-12-14T12:50:15.247Z,1513255815.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:15.287Z,1513255815.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:15.609Z,1513255815.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:15.643Z,1513255815.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:15.975Z,1513255815.975 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0285.lzma.bak
2017-12-14T12:50:15.975Z,1513255815.975 [DataOverHttps](INFO): SBD MOMSN=5438742
2017-12-14T12:50:16.017Z,1513255816.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:16.047Z,1513255816.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:17.287Z,1513255817.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:17.302Z,1513255817.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:17.306Z,1513255817.306 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T12:50:17.306Z,1513255817.306 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T12:50:17.306Z,1513255817.306 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T12:50:17.409Z,1513255817.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:17.424Z,1513255817.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:20.832Z,1513255820.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:20.912Z,1513255820.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:21.038Z,1513255821.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:21.061Z,1513255821.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:21.415Z,1513255821.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:21.445Z,1513255821.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:21.814Z,1513255821.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:21.900Z,1513255821.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:22.252Z,1513255822.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:22.293Z,1513255822.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:22.590Z,1513255822.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:22.623Z,1513255822.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:23.009Z,1513255823.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:23.041Z,1513255823.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:23.394Z,1513255823.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:23.416Z,1513255823.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:23.803Z,1513255823.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:23.818Z,1513255823.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:24.203Z,1513255824.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:24.323Z,1513255824.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:24.609Z,1513255824.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:24.624Z,1513255824.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:24.995Z,1513255824.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:25.027Z,1513255825.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:25.406Z,1513255825.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:25.421Z,1513255825.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:25.802Z,1513255825.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:25.843Z,1513255825.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:26.193Z,1513255826.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:26.212Z,1513255826.212 [PNI_TCM](ERROR): CRC does not match. Expected:0x53241 got:0x7233
2017-12-14T12:50:26.232Z,1513255826.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:26.657Z,1513255826.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:26.705Z,1513255826.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:27.011Z,1513255827.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:27.032Z,1513255827.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:27.400Z,1513255827.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:27.424Z,1513255827.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:27.822Z,1513255827.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:27.838Z,1513255827.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:28.199Z,1513255828.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:28.222Z,1513255828.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:28.642Z,1513255828.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:28.681Z,1513255828.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:28.994Z,1513255828.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:29.036Z,1513255829.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:29.396Z,1513255829.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:29.438Z,1513255829.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:29.809Z,1513255829.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:29.843Z,1513255829.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:30.253Z,1513255830.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:30.304Z,1513255830.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:30.614Z,1513255830.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:30.634Z,1513255830.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:30.987Z,1513255830.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:31.029Z,1513255831.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:31.406Z,1513255831.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:31.425Z,1513255831.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:31.801Z,1513255831.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:31.816Z,1513255831.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:32.261Z,1513255832.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:32.297Z,1513255832.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:32.615Z,1513255832.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:32.653Z,1513255832.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:33.010Z,1513255833.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:33.083Z,1513255833.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:33.413Z,1513255833.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:33.441Z,1513255833.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:33.793Z,1513255833.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:33.889Z,1513255833.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:34.210Z,1513255834.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:34.286Z,1513255834.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:34.600Z,1513255834.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:34.654Z,1513255834.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:34.998Z,1513255834.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:35.025Z,1513255835.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:35.395Z,1513255835.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:35.439Z,1513255835.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:35.806Z,1513255835.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:35.822Z,1513255835.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:36.237Z,1513255836.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:36.302Z,1513255836.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:36.600Z,1513255836.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:36.623Z,1513255836.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:37.024Z,1513255837.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:37.059Z,1513255837.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:37.391Z,1513255837.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:37.432Z,1513255837.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:37.793Z,1513255837.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:37.823Z,1513255837.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:38.191Z,1513255838.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:38.217Z,1513255838.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:38.634Z,1513255838.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:38.655Z,1513255838.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:39.014Z,1513255839.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:39.039Z,1513255839.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:39.410Z,1513255839.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:39.432Z,1513255839.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:39.797Z,1513255839.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:39.818Z,1513255839.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:39.829Z,1513255839.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:40.248Z,1513255840.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:40.299Z,1513255840.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:40.614Z,1513255840.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:40.634Z,1513255840.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:40.674Z,1513255840.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:41.006Z,1513255841.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:41.025Z,1513255841.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:41.036Z,1513255841.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:41.412Z,1513255841.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:41.428Z,1513255841.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:41.817Z,1513255841.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:41.832Z,1513255841.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:42.218Z,1513255842.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:42.237Z,1513255842.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:42.634Z,1513255842.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:42.683Z,1513255842.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:42.996Z,1513255842.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:43.024Z,1513255843.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:43.398Z,1513255843.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:43.448Z,1513255843.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:43.803Z,1513255843.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:43.830Z,1513255843.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:44.243Z,1513255844.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:44.296Z,1513255844.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:44.611Z,1513255844.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:44.630Z,1513255844.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:44.995Z,1513255844.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:45.031Z,1513255845.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:45.402Z,1513255845.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:45.420Z,1513255845.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:45.808Z,1513255845.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:45.824Z,1513255845.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:46.204Z,1513255846.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:46.295Z,1513255846.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:46.644Z,1513255846.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:46.671Z,1513255846.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:47.014Z,1513255847.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:47.038Z,1513255847.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:47.406Z,1513255847.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:47.434Z,1513255847.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:47.796Z,1513255847.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:47.811Z,1513255847.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:48.210Z,1513255848.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:48.297Z,1513255848.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:48.603Z,1513255848.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:48.624Z,1513255848.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:48.999Z,1513255848.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:49.019Z,1513255849.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:49.402Z,1513255849.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:49.417Z,1513255849.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:49.830Z,1513255849.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:49.867Z,1513255849.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:50.248Z,1513255850.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:50.311Z,1513255850.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:50.621Z,1513255850.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:50.650Z,1513255850.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:51.004Z,1513255851.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:51.020Z,1513255851.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:51.395Z,1513255851.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:51.422Z,1513255851.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:51.803Z,1513255851.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:51.821Z,1513255851.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:52.203Z,1513255852.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:52.223Z,1513255852.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:52.612Z,1513255852.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:52.653Z,1513255852.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:53.033Z,1513255853.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:53.069Z,1513255853.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:53.414Z,1513255853.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:53.435Z,1513255853.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:53.804Z,1513255853.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:53.827Z,1513255853.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:54.205Z,1513255854.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:54.220Z,1513255854.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:54.653Z,1513255854.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:54.736Z,1513255854.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:54.988Z,1513255854.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:55.032Z,1513255855.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:55.418Z,1513255855.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:55.475Z,1513255855.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:55.815Z,1513255855.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:55.835Z,1513255855.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:56.247Z,1513255856.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:56.292Z,1513255856.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:56.638Z,1513255856.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:56.681Z,1513255856.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:56.994Z,1513255856.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:57.023Z,1513255857.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:57.426Z,1513255857.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:57.447Z,1513255857.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:57.794Z,1513255857.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:57.831Z,1513255857.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:58.283Z,1513255858.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:58.298Z,1513255858.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x14483 got:0x16849
2017-12-14T12:50:58.324Z,1513255858.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:58.602Z,1513255858.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:58.639Z,1513255858.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:58.996Z,1513255858.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:59.010Z,1513255859.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:59.391Z,1513255859.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:59.457Z,1513255859.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:50:59.811Z,1513255859.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:50:59.831Z,1513255859.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:00.250Z,1513255860.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:00.301Z,1513255860.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:00.606Z,1513255860.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:00.644Z,1513255860.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:00.999Z,1513255860.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:01.039Z,1513255861.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:01.395Z,1513255861.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:01.441Z,1513255861.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:01.791Z,1513255861.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:01.810Z,1513255861.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:02.216Z,1513255862.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:02.291Z,1513255862.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:02.609Z,1513255862.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:02.688Z,1513255862.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:03.015Z,1513255863.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:03.039Z,1513255863.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:03.404Z,1513255863.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:03.419Z,1513255863.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:03.801Z,1513255863.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:03.815Z,1513255863.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:04.216Z,1513255864.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:04.297Z,1513255864.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:04.595Z,1513255864.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:04.656Z,1513255864.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:04.996Z,1513255864.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:05.024Z,1513255865.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:05.404Z,1513255865.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:05.419Z,1513255865.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:05.829Z,1513255865.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:05.856Z,1513255865.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:06.216Z,1513255866.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:06.314Z,1513255866.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:06.611Z,1513255866.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:06.637Z,1513255866.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:07.006Z,1513255867.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:07.021Z,1513255867.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:07.396Z,1513255867.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:07.427Z,1513255867.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:07.800Z,1513255867.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:07.821Z,1513255867.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:08.214Z,1513255868.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:08.228Z,1513255868.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:08.658Z,1513255868.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:08.673Z,1513255868.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:09.021Z,1513255869.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:09.060Z,1513255869.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:09.415Z,1513255869.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:09.435Z,1513255869.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:09.806Z,1513255869.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:09.822Z,1513255869.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:10.202Z,1513255870.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:10.217Z,1513255870.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:10.627Z,1513255870.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:10.708Z,1513255870.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:10.993Z,1513255870.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:11.023Z,1513255871.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:11.392Z,1513255871.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:11.426Z,1513255871.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:11.823Z,1513255871.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:11.840Z,1513255871.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:12.270Z,1513255872.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:12.350Z,1513255872.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:12.639Z,1513255872.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:12.654Z,1513255872.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:12.999Z,1513255872.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:13.035Z,1513255873.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:13.469Z,1513255873.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:13.500Z,1513255873.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:13.789Z,1513255873.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:13.823Z,1513255873.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:14.230Z,1513255874.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:14.308Z,1513255874.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:14.617Z,1513255874.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:14.634Z,1513255874.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:15.012Z,1513255875.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:15.027Z,1513255875.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:15.406Z,1513255875.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:15.429Z,1513255875.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:15.787Z,1513255875.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:15.819Z,1513255875.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:16.188Z,1513255876.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:16.323Z,1513255876.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:16.605Z,1513255876.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:16.668Z,1513255876.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:16.994Z,1513255876.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:17.055Z,1513255877.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:17.422Z,1513255877.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:17.490Z,1513255877.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:17.826Z,1513255877.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:17.894Z,1513255877.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:24.158Z,1513255884.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:24.211Z,1513255884.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:24.322Z,1513255884.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:24.353Z,1513255884.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:24.714Z,1513255884.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:24.757Z,1513255884.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:25.075Z,1513255885.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:25.118Z,1513255885.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:25.468Z,1513255885.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:25.531Z,1513255885.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:25.874Z,1513255885.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:25.903Z,1513255885.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:26.314Z,1513255886.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:26.337Z,1513255886.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:26.687Z,1513255886.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:26.728Z,1513255886.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:27.084Z,1513255887.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:27.100Z,1513255887.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:27.473Z,1513255887.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:27.504Z,1513255887.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:27.874Z,1513255887.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:27.909Z,1513255887.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:28.312Z,1513255888.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:28.360Z,1513255888.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:28.719Z,1513255888.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:28.759Z,1513255888.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:29.063Z,1513255889.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:29.126Z,1513255889.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:29.478Z,1513255889.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:29.526Z,1513255889.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:29.888Z,1513255889.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:29.939Z,1513255889.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:30.304Z,1513255890.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:30.351Z,1513255890.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:30.660Z,1513255890.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:30.694Z,1513255890.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:31.061Z,1513255891.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:31.106Z,1513255891.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:31.461Z,1513255891.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:31.508Z,1513255891.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:31.865Z,1513255891.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:31.912Z,1513255891.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:32.290Z,1513255892.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:32.348Z,1513255892.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:32.677Z,1513255892.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:32.737Z,1513255892.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:33.082Z,1513255893.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:33.108Z,1513255893.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:33.480Z,1513255893.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:33.535Z,1513255893.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:33.860Z,1513255893.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:33.903Z,1513255893.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:34.344Z,1513255894.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:34.430Z,1513255894.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:34.671Z,1513255894.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:34.710Z,1513255894.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:35.064Z,1513255895.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:35.080Z,1513255895.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:35.478Z,1513255895.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:35.506Z,1513255895.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:35.882Z,1513255895.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:35.904Z,1513255895.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:36.280Z,1513255896.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:36.300Z,1513255896.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:36.683Z,1513255896.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:36.739Z,1513255896.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:37.083Z,1513255897.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:37.111Z,1513255897.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:37.480Z,1513255897.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:37.508Z,1513255897.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:37.508Z,1513255897.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 246
2017-12-14T12:51:37.508Z,1513255897.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:51:37.514Z,1513255897.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:37.514Z,1513255897.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 246
2017-12-14T12:51:37.514Z,1513255897.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:51:37.516Z,1513255897.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:37.516Z,1513255897.516 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 246
2017-12-14T12:51:37.537Z,1513255897.537 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:51:37.582Z,1513255897.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:51:37.582Z,1513255897.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:51:37.582Z,1513255897.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:51:37.875Z,1513255897.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:37.951Z,1513255897.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:51:37.951Z,1513255897.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 246
2017-12-14T12:51:37.951Z,1513255897.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:51:37.951Z,1513255897.951 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 246
2017-12-14T12:51:37.952Z,1513255897.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:51:37.952Z,1513255897.952 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 246
2017-12-14T12:51:38.275Z,1513255898.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:38.312Z,1513255898.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:51:38.312Z,1513255898.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:51:38.312Z,1513255898.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:51:38.313Z,1513255898.313 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:51:38.313Z,1513255898.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:51:38.314Z,1513255898.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:51:38.314Z,1513255898.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:51:38.314Z,1513255898.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:51:38.315Z,1513255898.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:51:38.662Z,1513255898.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:38.738Z,1513255898.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:39.061Z,1513255899.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:39.097Z,1513255899.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:39.480Z,1513255899.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:39.500Z,1513255899.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:39.881Z,1513255899.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:39.915Z,1513255899.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:40.291Z,1513255900.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:40.339Z,1513255900.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:40.696Z,1513255900.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:40.743Z,1513255900.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:41.061Z,1513255901.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:41.101Z,1513255901.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:41.472Z,1513255901.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:41.504Z,1513255901.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:41.903Z,1513255901.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:42.009Z,1513255902.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:42.300Z,1513255902.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:42.327Z,1513255902.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:42.677Z,1513255902.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:42.714Z,1513255902.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:43.073Z,1513255903.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:43.120Z,1513255903.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:43.472Z,1513255903.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:43.496Z,1513255903.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:43.876Z,1513255903.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:43.922Z,1513255903.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:44.311Z,1513255904.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:44.398Z,1513255904.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:44.671Z,1513255904.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:44.695Z,1513255904.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:45.060Z,1513255905.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:45.096Z,1513255905.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:45.460Z,1513255905.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:45.543Z,1513255905.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:45.863Z,1513255905.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:45.909Z,1513255905.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:46.290Z,1513255906.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:46.356Z,1513255906.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:46.707Z,1513255906.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:46.757Z,1513255906.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:47.088Z,1513255907.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:47.108Z,1513255907.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:47.477Z,1513255907.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:47.498Z,1513255907.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:47.863Z,1513255907.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:47.894Z,1513255907.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:48.298Z,1513255908.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:48.355Z,1513255908.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:48.660Z,1513255908.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:48.691Z,1513255908.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:49.059Z,1513255909.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:49.093Z,1513255909.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:49.478Z,1513255909.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:49.497Z,1513255909.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:49.881Z,1513255909.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:49.895Z,1513255909.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:50.287Z,1513255910.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:50.307Z,1513255910.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:50.666Z,1513255910.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:50.695Z,1513255910.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:51.060Z,1513255911.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:51.095Z,1513255911.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:51.489Z,1513255911.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:51.511Z,1513255911.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:51.869Z,1513255911.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:51.899Z,1513255911.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:52.270Z,1513255912.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:52.296Z,1513255912.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:52.682Z,1513255912.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:52.697Z,1513255912.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:53.059Z,1513255913.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:53.097Z,1513255913.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:53.469Z,1513255913.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:53.495Z,1513255913.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:53.885Z,1513255913.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:53.900Z,1513255913.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:54.314Z,1513255914.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:54.362Z,1513255914.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:54.667Z,1513255914.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:54.719Z,1513255914.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:55.059Z,1513255915.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:55.096Z,1513255915.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:55.459Z,1513255915.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:55.494Z,1513255915.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:55.863Z,1513255915.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:55.895Z,1513255915.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:56.294Z,1513255916.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:56.318Z,1513255916.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:56.675Z,1513255916.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:56.704Z,1513255916.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:57.073Z,1513255917.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:57.111Z,1513255917.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:57.474Z,1513255917.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:57.500Z,1513255917.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:57.867Z,1513255917.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:57.899Z,1513255917.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:58.290Z,1513255918.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:58.319Z,1513255918.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:58.672Z,1513255918.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:58.706Z,1513255918.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:59.065Z,1513255919.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:59.080Z,1513255919.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:59.477Z,1513255919.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:59.524Z,1513255919.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:51:59.881Z,1513255919.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:51:59.920Z,1513255919.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:00.310Z,1513255920.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:00.325Z,1513255920.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:00.670Z,1513255920.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:00.702Z,1513255920.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:01.069Z,1513255921.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:01.084Z,1513255921.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:01.468Z,1513255921.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:01.483Z,1513255921.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:01.870Z,1513255921.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:01.884Z,1513255921.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:02.309Z,1513255922.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:02.344Z,1513255922.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:02.684Z,1513255922.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:02.699Z,1513255922.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:03.090Z,1513255923.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:03.119Z,1513255923.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:03.478Z,1513255923.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:03.510Z,1513255923.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:03.865Z,1513255923.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:03.884Z,1513255923.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:04.313Z,1513255924.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:04.370Z,1513255924.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:04.681Z,1513255924.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:04.696Z,1513255924.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:05.067Z,1513255925.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:05.095Z,1513255925.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:05.478Z,1513255925.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:05.493Z,1513255925.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:05.895Z,1513255925.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:05.927Z,1513255925.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:06.278Z,1513255926.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:06.294Z,1513255926.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:06.677Z,1513255926.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:06.743Z,1513255926.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:07.061Z,1513255927.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:07.092Z,1513255927.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:07.488Z,1513255927.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:07.547Z,1513255927.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:07.883Z,1513255927.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:07.904Z,1513255927.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:08.296Z,1513255928.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:08.347Z,1513255928.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:08.672Z,1513255928.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:08.700Z,1513255928.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:09.059Z,1513255929.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:09.100Z,1513255929.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:09.474Z,1513255929.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:09.500Z,1513255929.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:09.874Z,1513255929.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:09.901Z,1513255929.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:10.302Z,1513255930.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:10.324Z,1513255930.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:10.693Z,1513255930.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:10.720Z,1513255930.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:11.067Z,1513255931.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:11.103Z,1513255931.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:11.477Z,1513255931.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:11.502Z,1513255931.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:11.869Z,1513255931.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:11.883Z,1513255931.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:12.299Z,1513255932.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:12.338Z,1513255932.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:12.659Z,1513255932.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:12.691Z,1513255932.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:13.063Z,1513255933.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:13.088Z,1513255933.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:13.463Z,1513255933.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:13.489Z,1513255933.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:13.892Z,1513255933.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:13.940Z,1513255933.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:14.301Z,1513255934.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:14.329Z,1513255934.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:14.678Z,1513255934.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:14.711Z,1513255934.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:15.083Z,1513255935.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:15.098Z,1513255935.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:15.482Z,1513255935.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:15.497Z,1513255935.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:15.859Z,1513255935.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:15.890Z,1513255935.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:16.328Z,1513255936.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:16.348Z,1513255936.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:16.707Z,1513255936.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:16.767Z,1513255936.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:17.081Z,1513255937.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:17.116Z,1513255937.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:17.490Z,1513255937.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:17.519Z,1513255937.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:17.879Z,1513255937.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:17.893Z,1513255937.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:21.416Z,1513255941.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:21.432Z,1513255941.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:21.528Z,1513255941.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:21.574Z,1513255941.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:21.887Z,1513255941.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:21.918Z,1513255941.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:22.302Z,1513255942.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:22.329Z,1513255942.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:22.684Z,1513255942.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:22.701Z,1513255942.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:23.084Z,1513255943.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:23.099Z,1513255943.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:23.499Z,1513255943.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:23.532Z,1513255943.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:23.897Z,1513255943.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:23.927Z,1513255943.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:24.303Z,1513255944.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:24.330Z,1513255944.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:24.690Z,1513255944.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:24.718Z,1513255944.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:25.088Z,1513255945.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:25.104Z,1513255945.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:25.486Z,1513255945.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:25.501Z,1513255945.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:25.882Z,1513255945.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:25.916Z,1513255945.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:26.305Z,1513255946.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:26.346Z,1513255946.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:26.695Z,1513255946.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:26.732Z,1513255946.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:27.110Z,1513255947.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:27.131Z,1513255947.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:27.503Z,1513255947.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:27.570Z,1513255947.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:27.883Z,1513255947.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:27.915Z,1513255947.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:28.310Z,1513255948.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:28.328Z,1513255948.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:28.684Z,1513255948.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:28.744Z,1513255948.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:29.083Z,1513255949.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:29.118Z,1513255949.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:29.502Z,1513255949.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:29.529Z,1513255949.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:29.920Z,1513255949.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:29.983Z,1513255949.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:30.343Z,1513255950.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:30.379Z,1513255950.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:30.679Z,1513255950.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:30.736Z,1513255950.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:31.083Z,1513255951.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:31.109Z,1513255951.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:31.499Z,1513255951.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:31.514Z,1513255951.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:31.890Z,1513255951.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:31.905Z,1513255951.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:32.287Z,1513255952.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:32.308Z,1513255952.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:32.695Z,1513255952.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:32.719Z,1513255952.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:33.152Z,1513255953.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:33.205Z,1513255953.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:33.494Z,1513255953.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:33.521Z,1513255953.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:33.884Z,1513255953.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:33.910Z,1513255953.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:34.279Z,1513255954.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:34.312Z,1513255954.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:34.698Z,1513255954.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:34.716Z,1513255954.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:35.079Z,1513255955.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:35.111Z,1513255955.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:35.503Z,1513255955.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:35.518Z,1513255955.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:35.904Z,1513255955.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:35.919Z,1513255955.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:36.339Z,1513255956.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:36.372Z,1513255956.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:36.695Z,1513255956.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:36.730Z,1513255956.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:37.079Z,1513255957.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:37.115Z,1513255957.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:37.480Z,1513255957.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:37.522Z,1513255957.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:37.880Z,1513255957.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:37.919Z,1513255957.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:38.290Z,1513255958.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:38.330Z,1513255958.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:38.706Z,1513255958.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:38.722Z,1513255958.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:39.103Z,1513255959.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:39.157Z,1513255959.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:39.508Z,1513255959.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:39.536Z,1513255959.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:39.907Z,1513255959.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:39.922Z,1513255959.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:40.293Z,1513255960.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:40.313Z,1513255960.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:40.681Z,1513255960.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:40.696Z,1513255960.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:41.126Z,1513255961.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:41.150Z,1513255961.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:41.494Z,1513255961.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:41.522Z,1513255961.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:41.898Z,1513255961.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:41.912Z,1513255961.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:42.318Z,1513255962.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:42.340Z,1513255962.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:42.704Z,1513255962.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:42.735Z,1513255962.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:43.079Z,1513255963.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:43.106Z,1513255963.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:43.479Z,1513255963.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:43.508Z,1513255963.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:43.879Z,1513255963.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:43.908Z,1513255963.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:44.367Z,1513255964.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:44.457Z,1513255964.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:44.703Z,1513255964.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:44.719Z,1513255964.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:45.105Z,1513255965.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:45.123Z,1513255965.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:45.498Z,1513255965.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:45.514Z,1513255965.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:45.931Z,1513255965.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:45.970Z,1513255965.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:46.280Z,1513255966.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:46.312Z,1513255966.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:46.681Z,1513255966.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:46.710Z,1513255966.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:47.079Z,1513255967.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:47.118Z,1513255967.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:47.500Z,1513255967.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:47.523Z,1513255967.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:47.907Z,1513255967.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:47.922Z,1513255967.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:48.299Z,1513255968.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:48.319Z,1513255968.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:48.722Z,1513255968.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:48.737Z,1513255968.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:49.087Z,1513255969.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:49.123Z,1513255969.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:49.490Z,1513255969.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:49.519Z,1513255969.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:49.893Z,1513255969.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:49.975Z,1513255969.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:50.324Z,1513255970.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:50.340Z,1513255970.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:50.687Z,1513255970.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:50.748Z,1513255970.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:51.084Z,1513255971.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:51.098Z,1513255971.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:51.480Z,1513255971.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:51.503Z,1513255971.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:51.886Z,1513255971.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:51.929Z,1513255971.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:52.335Z,1513255972.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:52.350Z,1513255972.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:52.697Z,1513255972.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:52.747Z,1513255972.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:53.097Z,1513255973.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:53.112Z,1513255973.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:53.497Z,1513255973.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:53.512Z,1513255973.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:53.877Z,1513255973.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:53.904Z,1513255973.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:54.302Z,1513255974.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:54.325Z,1513255974.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:54.684Z,1513255974.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:54.706Z,1513255974.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:55.079Z,1513255975.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:55.114Z,1513255975.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:55.528Z,1513255975.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:55.551Z,1513255975.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:55.896Z,1513255975.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:55.919Z,1513255975.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:56.323Z,1513255976.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:56.351Z,1513255976.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:56.683Z,1513255976.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:56.706Z,1513255976.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:57.097Z,1513255977.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:57.111Z,1513255977.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:57.472Z,1513255977.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:57.504Z,1513255977.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:57.892Z,1513255977.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:57.907Z,1513255977.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:58.344Z,1513255978.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:58.371Z,1513255978.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:58.703Z,1513255978.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:58.727Z,1513255978.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:59.103Z,1513255979.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:59.117Z,1513255979.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:59.511Z,1513255979.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:59.526Z,1513255979.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:52:59.873Z,1513255979.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:52:59.897Z,1513255979.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:00.279Z,1513255980.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:00.314Z,1513255980.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:00.692Z,1513255980.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:00.707Z,1513255980.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:01.086Z,1513255981.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:01.140Z,1513255981.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:01.497Z,1513255981.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:01.534Z,1513255981.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:01.938Z,1513255981.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:01.986Z,1513255981.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:02.298Z,1513255982.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:02.330Z,1513255982.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:02.688Z,1513255982.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:02.707Z,1513255982.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:03.091Z,1513255983.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:03.106Z,1513255983.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:03.487Z,1513255983.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:03.502Z,1513255983.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:03.890Z,1513255983.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:03.905Z,1513255983.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:04.299Z,1513255984.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:04.330Z,1513255984.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:04.702Z,1513255984.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:04.718Z,1513255984.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:05.104Z,1513255985.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:05.157Z,1513255985.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:05.502Z,1513255985.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:05.523Z,1513255985.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:05.873Z,1513255985.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:05.897Z,1513255985.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:06.315Z,1513255986.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:06.331Z,1513255986.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:06.684Z,1513255986.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:06.715Z,1513255986.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:07.079Z,1513255987.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:07.114Z,1513255987.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:07.489Z,1513255987.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:07.524Z,1513255987.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:07.904Z,1513255987.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:07.918Z,1513255987.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:08.328Z,1513255988.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:08.371Z,1513255988.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:08.679Z,1513255988.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:08.716Z,1513255988.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:09.083Z,1513255989.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:09.098Z,1513255989.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:09.487Z,1513255989.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:09.523Z,1513255989.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:09.885Z,1513255989.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:09.900Z,1513255989.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:10.305Z,1513255990.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:10.334Z,1513255990.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:10.698Z,1513255990.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:10.729Z,1513255990.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:11.098Z,1513255991.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:11.126Z,1513255991.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:11.510Z,1513255991.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:11.598Z,1513255991.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:11.887Z,1513255991.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:11.902Z,1513255991.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:12.338Z,1513255992.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:12.360Z,1513255992.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:12.684Z,1513255992.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:12.715Z,1513255992.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:13.080Z,1513255993.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:13.142Z,1513255993.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:13.503Z,1513255993.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:13.518Z,1513255993.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:13.906Z,1513255993.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:13.958Z,1513255993.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:14.302Z,1513255994.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:14.317Z,1513255994.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:14.679Z,1513255994.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:14.771Z,1513255994.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:15.080Z,1513255995.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:15.116Z,1513255995.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:15.494Z,1513255995.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:15.521Z,1513255995.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:15.782Z,1513255995.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:15.902Z,1513255995.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:15.923Z,1513255995.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:16.306Z,1513255996.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:16.322Z,1513255996.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:16.581Z,1513255996.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:16.707Z,1513255996.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:16.731Z,1513255996.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:17.001Z,1513255997.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:17.080Z,1513255997.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:17.111Z,1513255997.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:17.491Z,1513255997.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:17.519Z,1513255997.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:17.798Z,1513255997.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:17.901Z,1513255997.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:17.937Z,1513255997.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:18.593Z,1513255998.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:18.998Z,1513255998.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:21.236Z,1513256001.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:21.252Z,1513256001.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:21.366Z,1513256001.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:21.400Z,1513256001.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:21.747Z,1513256001.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:21.785Z,1513256001.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:22.122Z,1513256002.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:22.147Z,1513256002.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:22.502Z,1513256002.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:22.535Z,1513256002.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:22.917Z,1513256002.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:22.975Z,1513256002.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:23.311Z,1513256003.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:23.326Z,1513256003.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:23.714Z,1513256003.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:23.730Z,1513256003.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:24.117Z,1513256004.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:24.155Z,1513256004.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:24.519Z,1513256004.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:24.535Z,1513256004.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:24.924Z,1513256004.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:24.952Z,1513256004.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:25.299Z,1513256005.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:25.331Z,1513256005.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:25.699Z,1513256005.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:25.730Z,1513256005.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:26.103Z,1513256006.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:26.128Z,1513256006.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:26.533Z,1513256006.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:26.555Z,1513256006.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:26.927Z,1513256006.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:26.950Z,1513256006.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:27.321Z,1513256007.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:27.340Z,1513256007.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:27.699Z,1513256007.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:27.730Z,1513256007.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:28.141Z,1513256008.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:28.199Z,1513256008.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:28.504Z,1513256008.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:28.519Z,1513256008.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:28.927Z,1513256008.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:28.958Z,1513256008.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:29.294Z,1513256009.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:29.300Z,1513256009.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:29.337Z,1513256009.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:29.724Z,1513256009.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:29.747Z,1513256009.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:30.089Z,1513256010.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:30.126Z,1513256010.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:30.141Z,1513256010.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:30.523Z,1513256010.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:30.623Z,1513256010.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:30.904Z,1513256010.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:30.940Z,1513256010.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:31.309Z,1513256011.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:31.338Z,1513256011.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:31.704Z,1513256011.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:31.740Z,1513256011.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:32.130Z,1513256012.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:32.151Z,1513256012.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:32.520Z,1513256012.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:32.544Z,1513256012.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:32.917Z,1513256012.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:32.944Z,1513256012.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:33.318Z,1513256013.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:33.348Z,1513256013.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:33.712Z,1513256013.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:33.767Z,1513256013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:34.107Z,1513256014.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:34.122Z,1513256014.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:34.508Z,1513256014.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:34.528Z,1513256014.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:34.908Z,1513256014.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:34.923Z,1513256014.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:35.309Z,1513256015.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:35.361Z,1513256015.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:35.718Z,1513256015.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:35.733Z,1513256015.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:36.118Z,1513256016.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:36.167Z,1513256016.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:36.509Z,1513256016.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:36.544Z,1513256016.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:36.903Z,1513256016.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:36.955Z,1513256016.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:37.303Z,1513256017.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:37.335Z,1513256017.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:37.699Z,1513256017.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:37.714Z,1513256017.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:38.148Z,1513256018.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:38.239Z,1513256018.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:38.510Z,1513256018.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:38.525Z,1513256018.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:38.921Z,1513256018.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:38.959Z,1513256018.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:39.314Z,1513256019.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:39.328Z,1513256019.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:39.710Z,1513256019.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:39.725Z,1513256019.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:40.110Z,1513256020.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:40.125Z,1513256020.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:40.507Z,1513256020.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:40.531Z,1513256020.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:40.911Z,1513256020.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:40.927Z,1513256020.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:41.311Z,1513256021.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:41.325Z,1513256021.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:41.486Z,1513256021.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:41.730Z,1513256021.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:41.754Z,1513256021.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:42.115Z,1513256022.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:42.130Z,1513256022.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:42.281Z,1513256022.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:42.526Z,1513256022.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:42.620Z,1513256022.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:42.904Z,1513256022.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:42.935Z,1513256022.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:43.352Z,1513256023.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:43.387Z,1513256023.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:43.704Z,1513256023.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:43.740Z,1513256023.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:44.099Z,1513256024.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:44.135Z,1513256024.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:44.586Z,1513256024.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:44.659Z,1513256024.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:44.928Z,1513256024.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:44.980Z,1513256024.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:45.319Z,1513256025.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:45.348Z,1513256025.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:45.708Z,1513256025.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:45.743Z,1513256025.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:46.107Z,1513256026.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:46.121Z,1513256026.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:46.510Z,1513256026.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:46.525Z,1513256026.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:46.906Z,1513256026.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:46.929Z,1513256026.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:47.309Z,1513256027.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:47.324Z,1513256027.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:47.710Z,1513256027.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:47.726Z,1513256027.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:48.114Z,1513256028.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:48.129Z,1513256028.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:48.514Z,1513256028.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:48.529Z,1513256028.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:48.908Z,1513256028.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:48.924Z,1513256028.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:49.310Z,1513256029.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:49.326Z,1513256029.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:49.721Z,1513256029.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:49.738Z,1513256029.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:50.107Z,1513256030.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:50.127Z,1513256030.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:50.512Z,1513256030.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:50.532Z,1513256030.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:50.937Z,1513256030.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:51.008Z,1513256031.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:51.314Z,1513256031.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:51.329Z,1513256031.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:51.712Z,1513256031.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:51.727Z,1513256031.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:52.106Z,1513256032.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:52.132Z,1513256032.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:52.507Z,1513256032.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:52.522Z,1513256032.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:52.902Z,1513256032.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:52.925Z,1513256032.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:53.312Z,1513256033.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:53.327Z,1513256033.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:53.718Z,1513256033.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:53.817Z,1513256033.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:54.137Z,1513256034.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:54.173Z,1513256034.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:54.513Z,1513256034.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:54.543Z,1513256034.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:54.904Z,1513256034.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:54.924Z,1513256034.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:55.308Z,1513256035.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:55.323Z,1513256035.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:55.709Z,1513256035.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:55.755Z,1513256035.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:56.109Z,1513256036.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:56.124Z,1513256036.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:56.514Z,1513256036.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:56.607Z,1513256036.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:56.923Z,1513256036.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:56.980Z,1513256036.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:57.324Z,1513256037.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:57.343Z,1513256037.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:57.699Z,1513256037.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:57.738Z,1513256037.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:58.099Z,1513256038.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:58.135Z,1513256038.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:58.503Z,1513256038.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:58.623Z,1513256038.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:58.903Z,1513256038.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:58.918Z,1513256038.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:59.304Z,1513256039.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:59.346Z,1513256039.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:53:59.718Z,1513256039.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:53:59.739Z,1513256039.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:00.121Z,1513256040.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:00.136Z,1513256040.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:00.533Z,1513256040.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:00.606Z,1513256040.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:00.915Z,1513256040.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:00.944Z,1513256040.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:01.304Z,1513256041.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:01.319Z,1513256041.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:01.709Z,1513256041.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:01.723Z,1513256041.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:02.108Z,1513256042.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:02.124Z,1513256042.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:02.521Z,1513256042.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:02.548Z,1513256042.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:02.921Z,1513256042.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:02.942Z,1513256042.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:03.310Z,1513256043.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:03.324Z,1513256043.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:03.704Z,1513256043.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:03.755Z,1513256043.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:04.108Z,1513256044.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:04.127Z,1513256044.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:04.506Z,1513256044.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:04.522Z,1513256044.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:04.903Z,1513256044.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:04.930Z,1513256044.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:05.313Z,1513256045.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:05.327Z,1513256045.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:05.718Z,1513256045.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:05.762Z,1513256045.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:06.121Z,1513256046.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:06.136Z,1513256046.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:06.524Z,1513256046.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:06.538Z,1513256046.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:06.921Z,1513256046.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:06.961Z,1513256046.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:07.304Z,1513256047.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:07.334Z,1513256047.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:07.704Z,1513256047.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:07.744Z,1513256047.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:08.109Z,1513256048.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:08.124Z,1513256048.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:08.521Z,1513256048.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:08.546Z,1513256048.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:08.918Z,1513256048.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:08.945Z,1513256048.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:09.314Z,1513256049.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:09.338Z,1513256049.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:09.709Z,1513256049.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:09.731Z,1513256049.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:10.146Z,1513256050.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:10.207Z,1513256050.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:10.506Z,1513256050.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:10.521Z,1513256050.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:10.899Z,1513256050.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:10.939Z,1513256050.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:11.337Z,1513256051.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:11.430Z,1513256051.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:11.705Z,1513256051.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:11.731Z,1513256051.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:12.121Z,1513256052.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:12.136Z,1513256052.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:12.516Z,1513256052.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:12.616Z,1513256052.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:12.905Z,1513256052.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:12.928Z,1513256052.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:13.322Z,1513256053.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:13.361Z,1513256053.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:13.708Z,1513256053.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:13.727Z,1513256053.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:14.109Z,1513256054.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:14.124Z,1513256054.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:14.517Z,1513256054.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:14.532Z,1513256054.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:14.918Z,1513256054.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:14.932Z,1513256054.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:15.317Z,1513256055.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:15.332Z,1513256055.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:15.711Z,1513256055.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:15.727Z,1513256055.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:16.108Z,1513256056.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:16.130Z,1513256056.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:16.521Z,1513256056.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:16.562Z,1513256056.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:16.900Z,1513256056.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:16.931Z,1513256056.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:17.318Z,1513256057.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:17.332Z,1513256057.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:17.718Z,1513256057.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:17.740Z,1513256057.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:18.122Z,1513256058.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:18.146Z,1513256058.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:21.522Z,1513256061.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:21.556Z,1513256061.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:21.662Z,1513256061.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:21.756Z,1513256061.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:22.042Z,1513256062.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:22.057Z,1513256062.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:22.443Z,1513256062.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:22.459Z,1513256062.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:22.836Z,1513256062.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:22.851Z,1513256062.851 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:54:22.851Z,1513256062.851 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:54:22.851Z,1513256062.851 [BPC1](ERROR): Communications Fault
2017-12-14T12:54:22.872Z,1513256062.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:22.932Z,1513256062.932 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:54:23.232Z,1513256063.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:23.268Z,1513256063.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:23.654Z,1513256063.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:23.674Z,1513256063.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:24.056Z,1513256064.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:24.072Z,1513256064.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:24.086Z,1513256064.086 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:54:24.086Z,1513256064.086 [BPC1] No Fault, FailCount= 1
2017-12-14T12:54:24.441Z,1513256064.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:24.527Z,1513256064.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:24.841Z,1513256064.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:24.856Z,1513256064.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:25.239Z,1513256065.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:25.259Z,1513256065.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:25.638Z,1513256065.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:25.659Z,1513256065.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:26.040Z,1513256066.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:26.141Z,1513256066.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:26.440Z,1513256066.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:26.456Z,1513256066.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:26.846Z,1513256066.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:26.861Z,1513256066.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:27.241Z,1513256067.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:27.279Z,1513256067.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:27.626Z,1513256067.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:27.642Z,1513256067.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:28.031Z,1513256068.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:28.052Z,1513256068.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:28.444Z,1513256068.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:28.471Z,1513256068.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:28.849Z,1513256068.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:28.883Z,1513256068.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:29.253Z,1513256069.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:29.276Z,1513256069.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:29.637Z,1513256069.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:29.651Z,1513256069.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:30.040Z,1513256070.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:30.055Z,1513256070.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:30.455Z,1513256070.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:30.478Z,1513256070.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:30.853Z,1513256070.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:30.879Z,1513256070.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:31.242Z,1513256071.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:31.257Z,1513256071.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:31.642Z,1513256071.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:31.657Z,1513256071.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:32.037Z,1513256072.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:32.051Z,1513256072.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:32.470Z,1513256072.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:32.502Z,1513256072.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:32.846Z,1513256072.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:32.903Z,1513256072.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:33.254Z,1513256073.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:33.285Z,1513256073.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:33.642Z,1513256073.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:33.657Z,1513256073.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:34.041Z,1513256074.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:34.056Z,1513256074.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:34.453Z,1513256074.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:34.480Z,1513256074.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:34.849Z,1513256074.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:34.876Z,1513256074.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:35.254Z,1513256075.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:35.284Z,1513256075.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:35.674Z,1513256075.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:35.707Z,1513256075.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:36.038Z,1513256076.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:36.053Z,1513256076.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:36.453Z,1513256076.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:36.483Z,1513256076.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:36.853Z,1513256076.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:36.886Z,1513256076.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:37.250Z,1513256077.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:37.284Z,1513256077.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:37.640Z,1513256077.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:37.656Z,1513256077.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:38.040Z,1513256078.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:38.055Z,1513256078.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:38.442Z,1513256078.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:38.456Z,1513256078.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:38.457Z,1513256078.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 247
2017-12-14T12:54:38.457Z,1513256078.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:54:38.459Z,1513256078.459 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:38.459Z,1513256078.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 247
2017-12-14T12:54:38.459Z,1513256078.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:54:38.461Z,1513256078.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:38.461Z,1513256078.461 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 247
2017-12-14T12:54:38.461Z,1513256078.461 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:54:38.498Z,1513256078.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:54:38.498Z,1513256078.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:54:38.499Z,1513256078.499 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:54:38.858Z,1513256078.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:38.915Z,1513256078.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:54:38.915Z,1513256078.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 247
2017-12-14T12:54:38.916Z,1513256078.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:54:38.916Z,1513256078.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 247
2017-12-14T12:54:38.916Z,1513256078.916 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:54:38.916Z,1513256078.916 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 247
2017-12-14T12:54:39.253Z,1513256079.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:39.278Z,1513256079.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:54:39.279Z,1513256079.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:54:39.279Z,1513256079.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:54:39.280Z,1513256079.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:54:39.280Z,1513256079.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:54:39.280Z,1513256079.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:54:39.281Z,1513256079.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:54:39.281Z,1513256079.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:54:39.281Z,1513256079.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:54:39.641Z,1513256079.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:39.656Z,1513256079.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:40.038Z,1513256080.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:40.054Z,1513256080.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:40.453Z,1513256080.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:40.486Z,1513256080.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:40.860Z,1513256080.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:40.875Z,1513256080.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:41.251Z,1513256081.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:41.271Z,1513256081.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:41.632Z,1513256081.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:41.663Z,1513256081.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:42.047Z,1513256082.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:42.103Z,1513256082.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:42.431Z,1513256082.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:42.465Z,1513256082.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:42.851Z,1513256082.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:42.879Z,1513256082.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:43.258Z,1513256083.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:43.273Z,1513256083.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:43.654Z,1513256083.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:43.669Z,1513256083.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:44.032Z,1513256084.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:44.064Z,1513256084.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:44.453Z,1513256084.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:44.468Z,1513256084.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:44.832Z,1513256084.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:44.863Z,1513256084.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:45.235Z,1513256085.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:45.375Z,1513256085.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:45.650Z,1513256085.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:45.673Z,1513256085.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:46.054Z,1513256086.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:46.118Z,1513256086.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:46.453Z,1513256086.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:46.468Z,1513256086.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:46.841Z,1513256086.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:46.895Z,1513256086.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:47.238Z,1513256087.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:47.254Z,1513256087.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:47.640Z,1513256087.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:47.654Z,1513256087.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:48.040Z,1513256088.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:48.055Z,1513256088.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:48.461Z,1513256088.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:48.504Z,1513256088.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:48.861Z,1513256088.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:48.894Z,1513256088.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:49.244Z,1513256089.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:49.264Z,1513256089.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:49.638Z,1513256089.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:49.670Z,1513256089.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:50.041Z,1513256090.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:50.055Z,1513256090.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:50.451Z,1513256090.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:50.466Z,1513256090.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:50.850Z,1513256090.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:50.868Z,1513256090.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:51.254Z,1513256091.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:51.280Z,1513256091.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:51.630Z,1513256091.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:51.695Z,1513256091.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:52.048Z,1513256092.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:52.079Z,1513256092.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:52.454Z,1513256092.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:52.474Z,1513256092.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:52.855Z,1513256092.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:52.883Z,1513256092.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:53.246Z,1513256093.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:53.270Z,1513256093.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:53.641Z,1513256093.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:53.656Z,1513256093.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:54.037Z,1513256094.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:54.052Z,1513256094.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:54.454Z,1513256094.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:54.484Z,1513256094.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:54.866Z,1513256094.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:54.938Z,1513256094.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:55.252Z,1513256095.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:55.268Z,1513256095.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:55.632Z,1513256095.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:55.663Z,1513256095.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:56.035Z,1513256096.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:56.068Z,1513256096.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:56.460Z,1513256096.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:56.483Z,1513256096.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:56.853Z,1513256096.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:56.875Z,1513256096.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:57.263Z,1513256097.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:57.278Z,1513256097.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:57.631Z,1513256097.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:57.654Z,1513256097.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:58.031Z,1513256098.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:58.087Z,1513256098.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:58.445Z,1513256098.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:58.477Z,1513256098.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:58.849Z,1513256098.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:58.882Z,1513256098.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:59.250Z,1513256099.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:59.272Z,1513256099.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:54:59.644Z,1513256099.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:54:59.674Z,1513256099.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:00.040Z,1513256100.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:00.073Z,1513256100.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:00.467Z,1513256100.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:00.487Z,1513256100.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:00.850Z,1513256100.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:00.876Z,1513256100.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:01.250Z,1513256101.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:01.279Z,1513256101.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:01.642Z,1513256101.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:01.657Z,1513256101.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:02.041Z,1513256102.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:02.056Z,1513256102.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:02.458Z,1513256102.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:02.485Z,1513256102.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:02.850Z,1513256102.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:02.878Z,1513256102.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:03.253Z,1513256103.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:03.291Z,1513256103.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:03.642Z,1513256103.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:03.657Z,1513256103.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:04.041Z,1513256104.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:04.056Z,1513256104.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:04.498Z,1513256104.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:04.537Z,1513256104.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:04.862Z,1513256104.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:04.888Z,1513256104.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:05.242Z,1513256105.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:05.258Z,1513256105.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:05.641Z,1513256105.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:05.656Z,1513256105.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:06.042Z,1513256106.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:06.063Z,1513256106.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:06.445Z,1513256106.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:06.460Z,1513256106.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:06.870Z,1513256106.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:06.912Z,1513256106.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:07.250Z,1513256107.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:07.265Z,1513256107.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:07.639Z,1513256107.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:07.696Z,1513256107.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:08.041Z,1513256108.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:08.059Z,1513256108.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:08.429Z,1513256108.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:08.456Z,1513256108.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:08.854Z,1513256108.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:08.869Z,1513256108.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:09.253Z,1513256109.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:09.268Z,1513256109.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:09.648Z,1513256109.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:09.665Z,1513256109.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:10.042Z,1513256110.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:10.050Z,1513256110.050 [BPC1](ERROR): Failed to receive battery data
2017-12-14T12:55:10.050Z,1513256110.050 [BPC1] Communications Fault, FailCount= 1
2017-12-14T12:55:10.051Z,1513256110.051 [BPC1](ERROR): Communications Fault
2017-12-14T12:55:10.058Z,1513256110.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:10.072Z,1513256110.072 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T12:55:10.431Z,1513256110.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:10.467Z,1513256110.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:10.863Z,1513256110.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:10.903Z,1513256110.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:11.245Z,1513256111.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:11.259Z,1513256111.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:11.272Z,1513256111.272 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T12:55:11.272Z,1513256111.272 [BPC1] No Fault, FailCount= 1
2017-12-14T12:55:11.656Z,1513256111.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:11.715Z,1513256111.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:12.053Z,1513256112.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:12.083Z,1513256112.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:12.441Z,1513256112.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:12.471Z,1513256112.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:12.836Z,1513256112.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:12.859Z,1513256112.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:13.233Z,1513256113.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:13.248Z,1513256113.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:13.637Z,1513256113.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:13.651Z,1513256113.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:14.078Z,1513256114.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:14.123Z,1513256114.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:14.442Z,1513256114.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:14.470Z,1513256114.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:14.854Z,1513256114.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:14.884Z,1513256114.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:15.249Z,1513256115.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:15.274Z,1513256115.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:15.634Z,1513256115.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:15.649Z,1513256115.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:16.035Z,1513256116.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:16.050Z,1513256116.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:16.450Z,1513256116.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:16.473Z,1513256116.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:16.849Z,1513256116.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:16.875Z,1513256116.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:17.249Z,1513256117.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:17.275Z,1513256117.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:17.642Z,1513256117.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:17.656Z,1513256117.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:17.659Z,1513256117.659 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T12:55:17.659Z,1513256117.659 [Default:CheckIn:C.Wait] Stopped
2017-12-14T12:55:17.660Z,1513256117.660 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T12:55:17.660Z,1513256117.660 [Default:CheckIn:D] Running Loop=1
2017-12-14T12:55:18.039Z,1513256118.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:18.059Z,1513256118.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:18.078Z,1513256118.078 [Default:CheckIn:D] Stopped
2017-12-14T12:55:18.079Z,1513256118.079 [Default:CheckIn:E] Running Loop=1
2017-12-14T12:55:18.469Z,1513256118.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:18.484Z,1513256118.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:18.487Z,1513256118.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 742.044792 min 
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn:E] Stopped
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn] Stopped
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn](INFO): Running loop #72
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn] Running Loop=72
2017-12-14T12:55:18.488Z,1513256118.488 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T12:55:18.489Z,1513256118.489 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T12:55:21.836Z,1513256121.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:21.878Z,1513256121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:21.990Z,1513256121.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:22.030Z,1513256122.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:22.333Z,1513256122.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:22.348Z,1513256122.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:22.744Z,1513256122.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:22.760Z,1513256122.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:23.134Z,1513256123.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:23.149Z,1513256123.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:23.539Z,1513256123.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:23.559Z,1513256123.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:23.937Z,1513256123.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:23.953Z,1513256123.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:24.337Z,1513256124.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:24.352Z,1513256124.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:24.732Z,1513256124.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:24.748Z,1513256124.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:25.134Z,1513256125.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:25.150Z,1513256125.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:25.525Z,1513256125.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:25.553Z,1513256125.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:25.931Z,1513256125.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:25.948Z,1513256125.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:26.332Z,1513256126.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:26.347Z,1513256126.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:26.736Z,1513256126.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:26.752Z,1513256126.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:27.137Z,1513256127.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:27.154Z,1513256127.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:27.538Z,1513256127.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:27.553Z,1513256127.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:27.924Z,1513256127.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:27.958Z,1513256127.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:28.378Z,1513256128.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:28.412Z,1513256128.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:28.737Z,1513256128.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:28.754Z,1513256128.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:29.135Z,1513256129.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:29.151Z,1513256129.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:29.542Z,1513256129.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:29.557Z,1513256129.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:29.954Z,1513256129.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:29.993Z,1513256129.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:30.343Z,1513256130.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:30.363Z,1513256130.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:30.723Z,1513256130.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:30.763Z,1513256130.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:31.123Z,1513256131.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:31.156Z,1513256131.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:31.527Z,1513256131.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:31.553Z,1513256131.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:31.924Z,1513256131.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:31.959Z,1513256131.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:32.352Z,1513256132.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:32.374Z,1513256132.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:32.748Z,1513256132.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:32.803Z,1513256132.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:33.179Z,1513256133.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:33.219Z,1513256133.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:33.538Z,1513256133.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:33.573Z,1513256133.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:33.923Z,1513256133.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:33.982Z,1513256133.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:34.327Z,1513256134.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:34.366Z,1513256134.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:34.724Z,1513256134.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:34.779Z,1513256134.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:35.128Z,1513256135.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:35.163Z,1513256135.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:35.543Z,1513256135.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:35.568Z,1513256135.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:35.956Z,1513256135.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:35.971Z,1513256135.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:36.351Z,1513256136.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:36.366Z,1513256136.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:36.729Z,1513256136.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:36.744Z,1513256136.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:37.131Z,1513256137.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:37.146Z,1513256137.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:37.524Z,1513256137.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:37.544Z,1513256137.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:37.934Z,1513256137.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:37.950Z,1513256137.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:38.328Z,1513256138.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:38.342Z,1513256138.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:38.746Z,1513256138.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:38.768Z,1513256138.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:39.141Z,1513256139.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:39.169Z,1513256139.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:39.579Z,1513256139.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:39.631Z,1513256139.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:39.928Z,1513256139.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:39.944Z,1513256139.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:40.331Z,1513256140.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:40.351Z,1513256140.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:40.775Z,1513256140.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:40.791Z,1513256140.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:41.129Z,1513256141.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:41.144Z,1513256141.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:41.541Z,1513256141.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:41.570Z,1513256141.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:41.946Z,1513256141.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:41.978Z,1513256141.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:42.342Z,1513256142.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:42.376Z,1513256142.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:42.768Z,1513256142.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:42.834Z,1513256142.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:43.133Z,1513256143.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:43.151Z,1513256143.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:43.535Z,1513256143.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:43.551Z,1513256143.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:43.937Z,1513256143.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:43.952Z,1513256143.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:44.333Z,1513256144.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:44.351Z,1513256144.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:44.738Z,1513256144.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:44.754Z,1513256144.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:45.141Z,1513256145.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:45.180Z,1513256145.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:45.541Z,1513256145.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:45.581Z,1513256145.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:45.947Z,1513256145.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:46.005Z,1513256146.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:46.332Z,1513256146.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:46.371Z,1513256146.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:46.724Z,1513256146.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:46.760Z,1513256146.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:47.123Z,1513256147.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:47.151Z,1513256147.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:47.547Z,1513256147.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:47.563Z,1513256147.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:47.951Z,1513256147.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:47.966Z,1513256147.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:48.334Z,1513256148.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:48.371Z,1513256148.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:48.750Z,1513256148.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:48.771Z,1513256148.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:49.155Z,1513256149.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:49.219Z,1513256149.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:49.528Z,1513256149.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:49.563Z,1513256149.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:49.930Z,1513256149.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:49.962Z,1513256149.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:50.330Z,1513256150.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:50.361Z,1513256150.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:50.761Z,1513256150.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:50.776Z,1513256150.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:51.154Z,1513256151.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:51.168Z,1513256151.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:51.539Z,1513256151.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:51.565Z,1513256151.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:51.928Z,1513256151.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:51.944Z,1513256151.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:52.330Z,1513256152.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:52.375Z,1513256152.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:52.731Z,1513256152.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:52.746Z,1513256152.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:53.130Z,1513256153.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:53.146Z,1513256153.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:53.541Z,1513256153.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:53.595Z,1513256153.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:53.946Z,1513256153.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:53.972Z,1513256153.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:54.338Z,1513256154.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:54.374Z,1513256154.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:54.731Z,1513256154.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:54.790Z,1513256154.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:55.131Z,1513256155.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:55.152Z,1513256155.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:55.583Z,1513256155.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:55.634Z,1513256155.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:55.939Z,1513256155.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:55.959Z,1513256155.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:56.340Z,1513256156.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:56.387Z,1513256156.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:56.742Z,1513256156.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:56.763Z,1513256156.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:57.142Z,1513256157.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:57.164Z,1513256157.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:57.543Z,1513256157.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:57.563Z,1513256157.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:57.936Z,1513256157.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:57.952Z,1513256157.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:58.332Z,1513256158.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:58.348Z,1513256158.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:58.766Z,1513256158.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:58.802Z,1513256158.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:59.123Z,1513256159.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:59.150Z,1513256159.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:59.540Z,1513256159.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:59.560Z,1513256159.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:55:59.946Z,1513256159.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:55:59.966Z,1513256159.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:00.353Z,1513256160.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:00.373Z,1513256160.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:00.746Z,1513256160.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:00.761Z,1513256160.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:01.123Z,1513256161.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:01.154Z,1513256161.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:01.527Z,1513256161.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:01.554Z,1513256161.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:01.956Z,1513256161.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:01.984Z,1513256161.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:02.320Z,1513256162.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:02.336Z,1513256162.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:02.746Z,1513256162.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:02.769Z,1513256162.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:03.151Z,1513256163.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:03.187Z,1513256163.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:03.539Z,1513256163.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:03.555Z,1513256163.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:03.927Z,1513256163.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:03.951Z,1513256163.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:04.335Z,1513256164.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:04.351Z,1513256164.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:04.744Z,1513256164.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:04.791Z,1513256164.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:05.132Z,1513256165.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:05.152Z,1513256165.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:05.547Z,1513256165.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:05.564Z,1513256165.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:05.962Z,1513256165.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:05.987Z,1513256165.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:06.342Z,1513256166.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:06.360Z,1513256166.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:06.731Z,1513256166.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:06.751Z,1513256166.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:07.133Z,1513256167.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:07.148Z,1513256167.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:07.535Z,1513256167.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:07.551Z,1513256167.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:07.934Z,1513256167.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:07.949Z,1513256167.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:08.331Z,1513256168.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:08.351Z,1513256168.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:08.741Z,1513256168.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:08.764Z,1513256168.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:09.146Z,1513256169.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:09.161Z,1513256169.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:09.547Z,1513256169.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:09.562Z,1513256169.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:09.927Z,1513256169.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:09.956Z,1513256169.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:10.323Z,1513256170.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:10.350Z,1513256170.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:10.724Z,1513256170.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:10.762Z,1513256170.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:11.123Z,1513256171.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:11.166Z,1513256171.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:11.546Z,1513256171.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:11.567Z,1513256171.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:11.962Z,1513256171.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:12.014Z,1513256172.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:12.370Z,1513256172.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:12.385Z,1513256172.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:12.730Z,1513256172.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:12.757Z,1513256172.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:13.129Z,1513256173.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:13.144Z,1513256173.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:13.531Z,1513256173.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:13.567Z,1513256173.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:13.933Z,1513256173.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:13.948Z,1513256173.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:14.355Z,1513256174.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:14.393Z,1513256174.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:14.777Z,1513256174.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:14.799Z,1513256174.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:15.154Z,1513256175.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:15.203Z,1513256175.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:15.506Z,1513256175.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:15.541Z,1513256175.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:15.601Z,1513256175.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:15.935Z,1513256175.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:15.951Z,1513256175.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:16.301Z,1513256176.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:16.339Z,1513256176.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:16.359Z,1513256176.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:16.732Z,1513256176.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:16.788Z,1513256176.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:17.143Z,1513256177.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:17.191Z,1513256177.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:17.595Z,1513256177.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:17.639Z,1513256177.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:17.947Z,1513256177.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:17.962Z,1513256177.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:18.362Z,1513256178.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:18.427Z,1513256178.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:18.747Z,1513256178.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:18.820Z,1513256178.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:25.931Z,1513256185.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:25.947Z,1513256185.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:26.055Z,1513256186.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:26.081Z,1513256186.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:26.440Z,1513256186.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:26.496Z,1513256186.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:26.841Z,1513256186.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:26.856Z,1513256186.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:27.240Z,1513256187.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:27.255Z,1513256187.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:27.651Z,1513256187.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:27.671Z,1513256187.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:28.048Z,1513256188.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:28.068Z,1513256188.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:28.462Z,1513256188.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:28.503Z,1513256188.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:28.865Z,1513256188.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:28.888Z,1513256188.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:29.269Z,1513256189.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:29.287Z,1513256189.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:29.633Z,1513256189.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:29.678Z,1513256189.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:30.045Z,1513256190.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:30.102Z,1513256190.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:30.483Z,1513256190.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:30.596Z,1513256190.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:30.847Z,1513256190.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:30.867Z,1513256190.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:31.240Z,1513256191.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:31.302Z,1513256191.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:31.634Z,1513256191.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:31.663Z,1513256191.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:32.031Z,1513256192.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:32.050Z,1513256192.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:32.452Z,1513256192.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:32.522Z,1513256192.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:32.850Z,1513256192.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:32.895Z,1513256192.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:33.245Z,1513256193.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:33.272Z,1513256193.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:33.655Z,1513256193.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:33.676Z,1513256193.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:34.025Z,1513256194.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:34.111Z,1513256194.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:34.440Z,1513256194.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:34.479Z,1513256194.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:34.865Z,1513256194.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:34.888Z,1513256194.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:35.264Z,1513256195.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:35.283Z,1513256195.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:35.634Z,1513256195.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:35.681Z,1513256195.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:36.032Z,1513256196.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:36.058Z,1513256196.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:36.444Z,1513256196.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:36.464Z,1513256196.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:36.856Z,1513256196.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:36.895Z,1513256196.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:37.246Z,1513256197.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:37.295Z,1513256197.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:37.635Z,1513256197.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:37.708Z,1513256197.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:38.034Z,1513256198.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:38.063Z,1513256198.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:38.443Z,1513256198.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:38.503Z,1513256198.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:38.839Z,1513256198.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:38.878Z,1513256198.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:39.236Z,1513256199.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:39.275Z,1513256199.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:39.630Z,1513256199.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:39.708Z,1513256199.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:40.025Z,1513256200.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:40.075Z,1513256200.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:40.436Z,1513256200.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:40.487Z,1513256200.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:40.843Z,1513256200.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:40.880Z,1513256200.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:41.259Z,1513256201.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:41.287Z,1513256201.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:41.628Z,1513256201.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:41.671Z,1513256201.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:42.061Z,1513256202.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:42.106Z,1513256202.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:42.451Z,1513256202.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:42.475Z,1513256202.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:42.847Z,1513256202.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:42.872Z,1513256202.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:43.243Z,1513256203.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:43.304Z,1513256203.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:43.626Z,1513256203.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:43.656Z,1513256203.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:44.026Z,1513256204.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:44.065Z,1513256204.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:44.447Z,1513256204.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:44.474Z,1513256204.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:44.842Z,1513256204.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:44.909Z,1513256204.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:45.245Z,1513256205.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:45.267Z,1513256205.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:45.625Z,1513256205.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:45.679Z,1513256205.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:46.052Z,1513256206.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:46.080Z,1513256206.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:46.425Z,1513256206.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:46.464Z,1513256206.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:46.838Z,1513256206.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:46.854Z,1513256206.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:47.246Z,1513256207.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:47.267Z,1513256207.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:47.645Z,1513256207.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:47.688Z,1513256207.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:48.036Z,1513256208.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:48.050Z,1513256208.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:48.435Z,1513256208.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:48.450Z,1513256208.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:48.842Z,1513256208.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:48.891Z,1513256208.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:49.232Z,1513256209.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:49.251Z,1513256209.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:49.647Z,1513256209.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:49.662Z,1513256209.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:50.044Z,1513256210.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:50.068Z,1513256210.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:50.441Z,1513256210.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:50.463Z,1513256210.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:50.835Z,1513256210.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:50.850Z,1513256210.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:51.228Z,1513256211.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:51.252Z,1513256211.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:51.623Z,1513256211.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:51.659Z,1513256211.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:52.017Z,1513256212.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:52.044Z,1513256212.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:52.443Z,1513256212.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:52.458Z,1513256212.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:52.855Z,1513256212.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:52.875Z,1513256212.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:53.248Z,1513256213.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:53.263Z,1513256213.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:53.623Z,1513256213.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:53.659Z,1513256213.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:54.024Z,1513256214.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:54.059Z,1513256214.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:54.423Z,1513256214.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:54.474Z,1513256214.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:54.850Z,1513256214.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:54.872Z,1513256214.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:55.236Z,1513256215.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:55.251Z,1513256215.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:55.638Z,1513256215.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:55.653Z,1513256215.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:56.033Z,1513256216.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:56.049Z,1513256216.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:56.430Z,1513256216.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:56.451Z,1513256216.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:56.834Z,1513256216.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:56.855Z,1513256216.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:57.234Z,1513256217.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:57.249Z,1513256217.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:57.670Z,1513256217.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:57.693Z,1513256217.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:58.050Z,1513256218.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:58.071Z,1513256218.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:58.446Z,1513256218.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:58.460Z,1513256218.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:58.824Z,1513256218.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:58.851Z,1513256218.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:59.233Z,1513256219.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:59.252Z,1513256219.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:56:59.624Z,1513256219.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:56:59.686Z,1513256219.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:00.024Z,1513256220.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:00.059Z,1513256220.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:00.423Z,1513256220.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:00.455Z,1513256220.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:00.856Z,1513256220.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:00.931Z,1513256220.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:01.247Z,1513256221.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:01.262Z,1513256221.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:01.646Z,1513256221.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:01.671Z,1513256221.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:02.023Z,1513256222.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:02.087Z,1513256222.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:02.423Z,1513256222.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:02.461Z,1513256222.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:02.824Z,1513256222.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:02.902Z,1513256222.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:03.220Z,1513256223.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:03.259Z,1513256223.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:03.647Z,1513256223.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:03.661Z,1513256223.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:04.048Z,1513256224.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:04.126Z,1513256224.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:04.446Z,1513256224.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:04.475Z,1513256224.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:04.832Z,1513256224.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:04.848Z,1513256224.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:05.231Z,1513256225.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:05.245Z,1513256225.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:05.630Z,1513256225.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:05.647Z,1513256225.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:06.028Z,1513256226.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:06.054Z,1513256226.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:06.438Z,1513256226.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:06.476Z,1513256226.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:06.847Z,1513256226.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:06.876Z,1513256226.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:07.246Z,1513256227.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:07.281Z,1513256227.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:07.624Z,1513256227.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:07.661Z,1513256227.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:08.027Z,1513256228.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:08.058Z,1513256228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:08.435Z,1513256228.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:08.467Z,1513256228.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:08.852Z,1513256228.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:08.867Z,1513256228.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:09.250Z,1513256229.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:09.267Z,1513256229.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:09.623Z,1513256229.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:09.660Z,1513256229.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:10.020Z,1513256230.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:10.035Z,1513256230.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:10.471Z,1513256230.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:10.503Z,1513256230.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:10.842Z,1513256230.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:10.866Z,1513256230.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:11.238Z,1513256231.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:11.284Z,1513256231.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:11.632Z,1513256231.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:11.671Z,1513256231.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:12.029Z,1513256232.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:12.044Z,1513256232.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:12.441Z,1513256232.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:12.468Z,1513256232.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:12.850Z,1513256232.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:12.879Z,1513256232.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:13.246Z,1513256233.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:13.272Z,1513256233.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:13.629Z,1513256233.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:13.691Z,1513256233.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:14.041Z,1513256234.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:14.084Z,1513256234.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:14.442Z,1513256234.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:14.456Z,1513256234.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:14.841Z,1513256234.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:14.863Z,1513256234.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:15.240Z,1513256235.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:15.256Z,1513256235.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:15.630Z,1513256235.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:15.653Z,1513256235.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:16.020Z,1513256236.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:16.047Z,1513256236.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:16.446Z,1513256236.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:16.463Z,1513256236.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:16.888Z,1513256236.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:16.919Z,1513256236.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:17.244Z,1513256237.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:17.263Z,1513256237.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:17.637Z,1513256237.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:17.653Z,1513256237.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:18.024Z,1513256238.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:18.055Z,1513256238.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:18.448Z,1513256238.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:18.463Z,1513256238.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:18.852Z,1513256238.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:18.905Z,1513256238.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:22.323Z,1513256242.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:22.383Z,1513256242.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:22.460Z,1513256242.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:22.499Z,1513256242.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:22.847Z,1513256242.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:22.906Z,1513256242.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:23.255Z,1513256243.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:23.271Z,1513256243.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:23.644Z,1513256243.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:23.669Z,1513256243.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:24.043Z,1513256244.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:24.106Z,1513256244.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:24.467Z,1513256244.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:24.482Z,1513256244.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:24.870Z,1513256244.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:24.919Z,1513256244.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:25.263Z,1513256245.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:25.279Z,1513256245.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:25.644Z,1513256245.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:25.670Z,1513256245.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:26.040Z,1513256246.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:26.067Z,1513256246.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:26.472Z,1513256246.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:26.492Z,1513256246.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:26.865Z,1513256246.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:26.880Z,1513256246.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:27.266Z,1513256247.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:27.299Z,1513256247.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:27.654Z,1513256247.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:27.670Z,1513256247.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:28.050Z,1513256248.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:28.076Z,1513256248.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:28.454Z,1513256248.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:28.475Z,1513256248.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:28.893Z,1513256248.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:28.908Z,1513256248.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:29.258Z,1513256249.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:29.273Z,1513256249.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:29.652Z,1513256249.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:29.675Z,1513256249.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:30.052Z,1513256250.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:30.075Z,1513256250.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:30.458Z,1513256250.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:30.473Z,1513256250.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:30.858Z,1513256250.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:30.873Z,1513256250.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:31.259Z,1513256251.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:31.275Z,1513256251.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:31.655Z,1513256251.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:31.671Z,1513256251.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:32.040Z,1513256252.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:32.062Z,1513256252.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:32.473Z,1513256252.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:32.500Z,1513256252.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:32.885Z,1513256252.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:32.915Z,1513256252.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:33.298Z,1513256253.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:33.354Z,1513256253.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:33.651Z,1513256253.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:33.670Z,1513256253.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:34.053Z,1513256254.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:34.069Z,1513256254.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:34.451Z,1513256254.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:34.471Z,1513256254.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:34.856Z,1513256254.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:34.871Z,1513256254.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:35.253Z,1513256255.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:35.268Z,1513256255.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:35.659Z,1513256255.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:35.675Z,1513256255.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:36.087Z,1513256256.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:36.111Z,1513256256.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:36.467Z,1513256256.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:36.491Z,1513256256.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:36.844Z,1513256256.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:36.867Z,1513256256.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:37.243Z,1513256257.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:37.258Z,1513256257.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:37.652Z,1513256257.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:37.687Z,1513256257.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:38.046Z,1513256258.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:38.106Z,1513256258.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:38.454Z,1513256258.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:38.483Z,1513256258.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:38.867Z,1513256258.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:38.883Z,1513256258.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:39.254Z,1513256259.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:39.287Z,1513256259.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:39.287Z,1513256259.287 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 248
2017-12-14T12:57:39.287Z,1513256259.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T12:57:39.289Z,1513256259.289 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:39.289Z,1513256259.289 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 248
2017-12-14T12:57:39.289Z,1513256259.289 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T12:57:39.291Z,1513256259.291 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:39.291Z,1513256259.291 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 248
2017-12-14T12:57:39.291Z,1513256259.291 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T12:57:39.304Z,1513256259.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T12:57:39.349Z,1513256259.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T12:57:39.350Z,1513256259.350 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T12:57:39.672Z,1513256259.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:39.721Z,1513256259.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T12:57:39.722Z,1513256259.722 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 248
2017-12-14T12:57:39.722Z,1513256259.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T12:57:39.722Z,1513256259.722 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 248
2017-12-14T12:57:39.723Z,1513256259.723 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T12:57:39.723Z,1513256259.723 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 248
2017-12-14T12:57:40.043Z,1513256260.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:40.069Z,1513256260.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T12:57:40.070Z,1513256260.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:57:40.070Z,1513256260.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:57:40.070Z,1513256260.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T12:57:40.071Z,1513256260.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:57:40.071Z,1513256260.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:57:40.071Z,1513256260.071 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T12:57:40.072Z,1513256260.072 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T12:57:40.072Z,1513256260.072 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T12:57:40.457Z,1513256260.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:40.481Z,1513256260.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:40.861Z,1513256260.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:40.891Z,1513256260.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:41.261Z,1513256261.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:41.289Z,1513256261.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:41.648Z,1513256261.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:41.663Z,1513256261.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:42.052Z,1513256262.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:42.067Z,1513256262.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:42.466Z,1513256262.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:42.495Z,1513256262.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:42.857Z,1513256262.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:42.891Z,1513256262.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:43.253Z,1513256263.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:43.281Z,1513256263.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:43.652Z,1513256263.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:43.682Z,1513256263.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:44.047Z,1513256264.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:44.082Z,1513256264.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:44.454Z,1513256264.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:44.485Z,1513256264.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:44.866Z,1513256264.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:44.920Z,1513256264.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:45.262Z,1513256265.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:45.290Z,1513256265.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:45.648Z,1513256265.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:45.684Z,1513256265.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:46.051Z,1513256266.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:46.096Z,1513256266.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:46.457Z,1513256266.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:46.472Z,1513256266.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:46.865Z,1513256266.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:46.919Z,1513256266.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:47.266Z,1513256267.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:47.302Z,1513256267.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:47.652Z,1513256267.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:47.675Z,1513256267.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:48.044Z,1513256268.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:48.059Z,1513256268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:48.457Z,1513256268.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:48.472Z,1513256268.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:48.857Z,1513256268.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:48.872Z,1513256268.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:49.257Z,1513256269.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:49.271Z,1513256269.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:49.655Z,1513256269.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:49.671Z,1513256269.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:50.040Z,1513256270.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:50.062Z,1513256270.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:50.458Z,1513256270.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:50.473Z,1513256270.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:50.858Z,1513256270.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:50.872Z,1513256270.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:51.258Z,1513256271.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:51.273Z,1513256271.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:51.657Z,1513256271.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:51.671Z,1513256271.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:52.052Z,1513256272.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:52.067Z,1513256272.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:52.462Z,1513256272.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:52.478Z,1513256272.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:52.861Z,1513256272.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:52.884Z,1513256272.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:53.267Z,1513256273.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:53.282Z,1513256273.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:53.658Z,1513256273.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:53.672Z,1513256273.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:54.044Z,1513256274.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:54.080Z,1513256274.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:54.470Z,1513256274.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:54.485Z,1513256274.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:54.868Z,1513256274.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:54.884Z,1513256274.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:55.273Z,1513256275.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:55.331Z,1513256275.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:55.644Z,1513256275.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:55.683Z,1513256275.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:56.042Z,1513256276.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:56.070Z,1513256276.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:56.464Z,1513256276.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:56.483Z,1513256276.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:56.869Z,1513256276.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:56.884Z,1513256276.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:57.287Z,1513256277.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:57.319Z,1513256277.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:57.644Z,1513256277.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:57.679Z,1513256277.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:58.057Z,1513256278.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:58.072Z,1513256278.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:58.478Z,1513256278.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:58.521Z,1513256278.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:58.867Z,1513256278.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:58.887Z,1513256278.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:59.265Z,1513256279.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:59.281Z,1513256279.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:57:59.648Z,1513256279.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:57:59.679Z,1513256279.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:00.043Z,1513256280.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:00.079Z,1513256280.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:00.467Z,1513256280.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:00.481Z,1513256280.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:00.865Z,1513256280.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:00.886Z,1513256280.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:01.254Z,1513256281.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:01.292Z,1513256281.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:01.647Z,1513256281.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:01.847Z,1513256281.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:02.042Z,1513256282.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:02.064Z,1513256282.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:02.462Z,1513256282.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:02.492Z,1513256282.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:02.862Z,1513256282.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:02.897Z,1513256282.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:03.254Z,1513256283.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:03.270Z,1513256283.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:03.653Z,1513256283.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:03.675Z,1513256283.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:04.053Z,1513256284.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:04.068Z,1513256284.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:04.458Z,1513256284.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:04.479Z,1513256284.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:04.866Z,1513256284.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:04.881Z,1513256284.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:05.266Z,1513256285.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:05.287Z,1513256285.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:05.656Z,1513256285.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:05.672Z,1513256285.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:06.050Z,1513256286.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:06.071Z,1513256286.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:06.467Z,1513256286.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:06.487Z,1513256286.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:06.866Z,1513256286.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:06.887Z,1513256286.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:07.259Z,1513256287.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:07.323Z,1513256287.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:07.644Z,1513256287.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:07.673Z,1513256287.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:08.047Z,1513256288.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:08.143Z,1513256288.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:08.472Z,1513256288.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:08.488Z,1513256288.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:08.866Z,1513256288.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:08.908Z,1513256288.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:09.268Z,1513256289.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:09.282Z,1513256289.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:09.644Z,1513256289.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:09.681Z,1513256289.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:10.043Z,1513256290.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:10.078Z,1513256290.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:10.453Z,1513256290.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:10.483Z,1513256290.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:10.865Z,1513256290.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:10.892Z,1513256290.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:11.280Z,1513256291.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:11.308Z,1513256291.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:11.658Z,1513256291.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:11.673Z,1513256291.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:12.048Z,1513256292.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:12.064Z,1513256292.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:12.453Z,1513256292.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:12.476Z,1513256292.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:12.865Z,1513256292.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:12.880Z,1513256292.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:13.258Z,1513256293.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:13.272Z,1513256293.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:13.655Z,1513256293.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:13.669Z,1513256293.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:14.047Z,1513256294.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:14.074Z,1513256294.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:14.487Z,1513256294.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:14.534Z,1513256294.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:14.870Z,1513256294.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:14.888Z,1513256294.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:15.265Z,1513256295.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:15.280Z,1513256295.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:15.655Z,1513256295.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:15.670Z,1513256295.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:16.058Z,1513256296.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:16.072Z,1513256296.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:16.463Z,1513256296.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:16.478Z,1513256296.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:16.869Z,1513256296.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:16.891Z,1513256296.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:17.269Z,1513256297.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:17.314Z,1513256297.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:17.686Z,1513256297.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:17.714Z,1513256297.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:18.044Z,1513256298.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:18.075Z,1513256298.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:18.468Z,1513256298.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:18.483Z,1513256298.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:18.868Z,1513256298.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:18.883Z,1513256298.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:22.377Z,1513256302.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:22.400Z,1513256302.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:22.494Z,1513256302.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:22.599Z,1513256302.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:22.871Z,1513256302.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:22.891Z,1513256302.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:23.282Z,1513256303.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:23.311Z,1513256303.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:23.668Z,1513256303.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:23.704Z,1513256303.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:24.087Z,1513256304.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:24.136Z,1513256304.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:24.450Z,1513256304.450 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T12:58:24.451Z,1513256304.451 [NAL9602] Data Fault, FailCount= 3
2017-12-14T12:58:24.451Z,1513256304.451 [NAL9602](ERROR): Data Fault
2017-12-14T12:58:24.467Z,1513256304.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:24.515Z,1513256304.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:24.574Z,1513256304.574 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T12:58:24.863Z,1513256304.863 [NAL9602](INFO): Powering down
2017-12-14T12:58:24.880Z,1513256304.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:24.895Z,1513256304.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:25.276Z,1513256305.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:25.299Z,1513256305.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:25.672Z,1513256305.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:25.695Z,1513256305.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:25.736Z,1513256305.736 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T12:58:25.736Z,1513256305.736 [NAL9602] No Fault, FailCount= 3
2017-12-14T12:58:26.073Z,1513256306.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:26.120Z,1513256306.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:26.477Z,1513256306.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:26.492Z,1513256306.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:26.872Z,1513256306.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:26.887Z,1513256306.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:27.307Z,1513256307.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:27.335Z,1513256307.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:27.675Z,1513256307.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:27.695Z,1513256307.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:28.077Z,1513256308.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:28.091Z,1513256308.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:28.477Z,1513256308.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:28.492Z,1513256308.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:28.874Z,1513256308.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:28.920Z,1513256308.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:29.270Z,1513256309.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:29.318Z,1513256309.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:29.672Z,1513256309.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:29.687Z,1513256309.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:30.079Z,1513256310.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:30.123Z,1513256310.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:30.517Z,1513256310.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:30.587Z,1513256310.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:30.866Z,1513256310.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:30.915Z,1513256310.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:31.270Z,1513256311.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:31.305Z,1513256311.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:31.671Z,1513256311.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:31.702Z,1513256311.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:32.064Z,1513256312.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:32.079Z,1513256312.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:32.466Z,1513256312.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:32.481Z,1513256312.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:32.876Z,1513256312.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:32.911Z,1513256312.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:33.267Z,1513256313.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:33.283Z,1513256313.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:33.671Z,1513256313.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:33.730Z,1513256313.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:34.086Z,1513256314.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:34.100Z,1513256314.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:34.474Z,1513256314.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:34.489Z,1513256314.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:34.876Z,1513256314.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:34.895Z,1513256314.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:35.277Z,1513256315.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:35.293Z,1513256315.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:35.673Z,1513256315.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:35.688Z,1513256315.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:36.077Z,1513256316.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:36.099Z,1513256316.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:36.480Z,1513256316.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:36.495Z,1513256316.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:36.913Z,1513256316.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:36.952Z,1513256316.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:37.267Z,1513256317.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:37.304Z,1513256317.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:37.671Z,1513256317.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:37.703Z,1513256317.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:38.067Z,1513256318.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:38.090Z,1513256318.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:38.466Z,1513256318.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:38.509Z,1513256318.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:38.872Z,1513256318.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:38.891Z,1513256318.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:39.276Z,1513256319.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:39.330Z,1513256319.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:39.674Z,1513256319.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:39.690Z,1513256319.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:40.094Z,1513256320.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:40.127Z,1513256320.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:40.466Z,1513256320.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:40.503Z,1513256320.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:40.874Z,1513256320.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:40.913Z,1513256320.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:41.274Z,1513256321.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:41.289Z,1513256321.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:41.675Z,1513256321.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:41.690Z,1513256321.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:42.076Z,1513256322.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:42.092Z,1513256322.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:42.483Z,1513256322.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:42.519Z,1513256322.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:42.871Z,1513256322.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:42.899Z,1513256322.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:43.275Z,1513256323.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:43.289Z,1513256323.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:43.681Z,1513256323.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:43.696Z,1513256323.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:44.071Z,1513256324.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:44.102Z,1513256324.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:44.466Z,1513256324.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:44.497Z,1513256324.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:44.867Z,1513256324.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:44.899Z,1513256324.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:45.267Z,1513256325.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:45.293Z,1513256325.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:45.667Z,1513256325.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:45.699Z,1513256325.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:46.061Z,1513256326.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:46.084Z,1513256326.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:46.513Z,1513256326.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:46.554Z,1513256326.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:46.867Z,1513256326.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:46.904Z,1513256326.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:47.270Z,1513256327.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:47.306Z,1513256327.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:47.670Z,1513256327.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:47.702Z,1513256327.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:48.070Z,1513256328.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:48.108Z,1513256328.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:48.479Z,1513256328.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:48.515Z,1513256328.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:48.879Z,1513256328.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:48.921Z,1513256328.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:49.278Z,1513256329.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:49.294Z,1513256329.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:49.671Z,1513256329.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:49.724Z,1513256329.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:50.077Z,1513256330.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:50.092Z,1513256330.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:50.472Z,1513256330.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:50.487Z,1513256330.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:50.867Z,1513256330.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:50.905Z,1513256330.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:51.266Z,1513256331.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:51.358Z,1513256331.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:51.670Z,1513256331.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:51.704Z,1513256331.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:52.071Z,1513256332.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:52.116Z,1513256332.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:52.470Z,1513256332.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:52.501Z,1513256332.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:52.892Z,1513256332.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:52.965Z,1513256332.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:53.273Z,1513256333.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:53.314Z,1513256333.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:53.667Z,1513256333.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:53.683Z,1513256333.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:54.074Z,1513256334.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:54.089Z,1513256334.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:54.460Z,1513256334.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:54.489Z,1513256334.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:54.874Z,1513256334.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:54.888Z,1513256334.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:55.256Z,1513256335.256 [NAL9602](INFO): Powering up NAL9602
2017-12-14T12:58:55.274Z,1513256335.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:55.288Z,1513256335.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:55.672Z,1513256335.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:55.687Z,1513256335.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:56.111Z,1513256336.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:56.135Z,1513256336.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:56.486Z,1513256336.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:56.500Z,1513256336.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:56.876Z,1513256336.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:56.899Z,1513256336.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:57.264Z,1513256337.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:57.291Z,1513256337.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:57.683Z,1513256337.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:57.698Z,1513256337.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:58.074Z,1513256338.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:58.093Z,1513256338.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:58.466Z,1513256338.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:58.502Z,1513256338.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:58.866Z,1513256338.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:58.900Z,1513256338.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:59.266Z,1513256339.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:59.292Z,1513256339.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:58:59.666Z,1513256339.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:58:59.699Z,1513256339.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:00.067Z,1513256340.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:00.099Z,1513256340.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:00.468Z,1513256340.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:00.507Z,1513256340.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:00.867Z,1513256340.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:00.899Z,1513256340.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:01.270Z,1513256341.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:01.316Z,1513256341.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:01.660Z,1513256341.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:01.675Z,1513256341.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:02.066Z,1513256342.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:02.082Z,1513256342.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:02.495Z,1513256342.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:02.531Z,1513256342.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:02.875Z,1513256342.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:02.890Z,1513256342.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:03.274Z,1513256343.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:03.289Z,1513256343.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:03.671Z,1513256343.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:03.706Z,1513256343.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:04.068Z,1513256344.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:04.094Z,1513256344.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:04.471Z,1513256344.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:04.487Z,1513256344.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:04.874Z,1513256344.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:04.890Z,1513256344.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:05.272Z,1513256345.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:05.286Z,1513256345.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:05.713Z,1513256345.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:05.732Z,1513256345.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:06.086Z,1513256346.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:06.107Z,1513256346.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:06.454Z,1513256346.454 [NAL9602](INFO): NAL9602 initialized
2017-12-14T12:59:06.484Z,1513256346.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:06.499Z,1513256346.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:06.873Z,1513256346.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:06.888Z,1513256346.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:07.285Z,1513256347.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:07.312Z,1513256347.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:07.689Z,1513256347.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:07.712Z,1513256347.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:08.082Z,1513256348.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:08.112Z,1513256348.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:08.484Z,1513256348.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:08.516Z,1513256348.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:08.898Z,1513256348.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:08.933Z,1513256348.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:09.275Z,1513256349.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:09.290Z,1513256349.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:09.678Z,1513256349.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:09.693Z,1513256349.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:10.089Z,1513256350.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:10.120Z,1513256350.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:10.492Z,1513256350.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:10.507Z,1513256350.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:10.868Z,1513256350.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:10.903Z,1513256350.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:11.267Z,1513256351.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:11.295Z,1513256351.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:11.672Z,1513256351.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:11.704Z,1513256351.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:12.105Z,1513256352.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:12.140Z,1513256352.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:12.475Z,1513256352.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:12.495Z,1513256352.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:12.890Z,1513256352.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:12.922Z,1513256352.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:13.282Z,1513256353.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:13.323Z,1513256353.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:13.677Z,1513256353.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:13.742Z,1513256353.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:14.076Z,1513256354.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:14.091Z,1513256354.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:14.476Z,1513256354.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:14.491Z,1513256354.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:14.878Z,1513256354.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:14.927Z,1513256354.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:15.278Z,1513256355.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:15.293Z,1513256355.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:15.693Z,1513256355.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:15.747Z,1513256355.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:16.080Z,1513256356.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:16.096Z,1513256356.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:16.482Z,1513256356.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:16.496Z,1513256356.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:16.871Z,1513256356.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:16.894Z,1513256356.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:16.929Z,1513256356.929 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T12:59:17.281Z,1513256357.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:17.296Z,1513256357.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:17.683Z,1513256357.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:17.697Z,1513256357.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:18.083Z,1513256358.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:18.098Z,1513256358.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:18.484Z,1513256358.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:18.637Z,1513256358.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:18.886Z,1513256358.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:18.904Z,1513256358.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:22.376Z,1513256362.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:22.392Z,1513256362.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:22.520Z,1513256362.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:22.555Z,1513256362.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:22.847Z,1513256362.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:22.887Z,1513256362.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:23.251Z,1513256363.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:23.266Z,1513256363.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:23.639Z,1513256363.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:23.659Z,1513256363.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:24.046Z,1513256364.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:24.095Z,1513256364.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:24.449Z,1513256364.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:24.463Z,1513256364.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:24.858Z,1513256364.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:24.892Z,1513256364.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:25.262Z,1513256365.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:25.294Z,1513256365.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:25.657Z,1513256365.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:25.694Z,1513256365.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:26.046Z,1513256366.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:26.061Z,1513256366.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:26.450Z,1513256366.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:26.465Z,1513256366.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:26.848Z,1513256366.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:26.862Z,1513256366.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:27.245Z,1513256367.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:27.260Z,1513256367.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:27.658Z,1513256367.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:27.689Z,1513256367.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:28.086Z,1513256368.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:28.154Z,1513256368.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:28.454Z,1513256368.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:28.480Z,1513256368.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:28.857Z,1513256368.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:28.872Z,1513256368.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:29.240Z,1513256369.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:29.276Z,1513256369.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:29.637Z,1513256369.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:29.669Z,1513256369.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:30.040Z,1513256370.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:30.072Z,1513256370.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:30.439Z,1513256370.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:30.471Z,1513256370.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:30.863Z,1513256370.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:30.879Z,1513256370.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:31.262Z,1513256371.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:31.282Z,1513256371.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:31.665Z,1513256371.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:31.680Z,1513256371.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:32.039Z,1513256372.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:32.075Z,1513256372.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:32.443Z,1513256372.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:32.478Z,1513256372.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:32.852Z,1513256372.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:32.881Z,1513256372.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:33.260Z,1513256373.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:33.285Z,1513256373.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:33.658Z,1513256373.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:33.684Z,1513256373.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:34.058Z,1513256374.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:34.082Z,1513256374.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:34.458Z,1513256374.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:34.483Z,1513256374.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:34.847Z,1513256374.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:34.867Z,1513256374.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:35.249Z,1513256375.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:35.264Z,1513256375.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:35.649Z,1513256375.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:35.727Z,1513256375.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:36.044Z,1513256376.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:36.067Z,1513256376.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:36.447Z,1513256376.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:36.463Z,1513256376.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:36.857Z,1513256376.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:36.914Z,1513256376.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:37.260Z,1513256377.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:37.279Z,1513256377.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:37.662Z,1513256377.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:37.700Z,1513256377.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:38.039Z,1513256378.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:38.066Z,1513256378.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:38.455Z,1513256378.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:38.479Z,1513256378.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:38.840Z,1513256378.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:38.865Z,1513256378.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:39.236Z,1513256379.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:39.270Z,1513256379.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:39.656Z,1513256379.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:39.676Z,1513256379.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:40.070Z,1513256380.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:40.084Z,1513256380.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:40.460Z,1513256380.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:40.475Z,1513256380.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:40.839Z,1513256380.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:40.875Z,1513256380.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:41.247Z,1513256381.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:41.276Z,1513256381.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:41.635Z,1513256381.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:41.650Z,1513256381.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:42.044Z,1513256382.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:42.059Z,1513256382.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:42.447Z,1513256382.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:42.461Z,1513256382.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:42.859Z,1513256382.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:42.883Z,1513256382.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:43.258Z,1513256383.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:43.283Z,1513256383.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:43.661Z,1513256383.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:43.686Z,1513256383.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:44.058Z,1513256384.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:44.091Z,1513256384.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:44.449Z,1513256384.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:44.487Z,1513256384.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:44.848Z,1513256384.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:44.863Z,1513256384.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:45.243Z,1513256385.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:45.260Z,1513256385.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:45.658Z,1513256385.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:45.686Z,1513256385.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:46.061Z,1513256386.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:46.108Z,1513256386.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:46.462Z,1513256386.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:46.476Z,1513256386.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:46.850Z,1513256386.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:46.885Z,1513256386.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:47.288Z,1513256387.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:47.340Z,1513256387.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:47.648Z,1513256387.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:47.664Z,1513256387.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:48.047Z,1513256388.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:48.067Z,1513256388.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:48.446Z,1513256388.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:48.461Z,1513256388.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:48.862Z,1513256388.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:48.892Z,1513256388.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:49.258Z,1513256389.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:49.272Z,1513256389.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:49.661Z,1513256389.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:49.676Z,1513256389.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:50.040Z,1513256390.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:50.060Z,1513256390.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:50.446Z,1513256390.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:50.467Z,1513256390.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:50.848Z,1513256390.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:50.871Z,1513256390.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:51.247Z,1513256391.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:51.262Z,1513256391.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:51.661Z,1513256391.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:51.676Z,1513256391.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:52.057Z,1513256392.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:52.072Z,1513256392.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:52.453Z,1513256392.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:52.469Z,1513256392.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:52.851Z,1513256392.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:52.871Z,1513256392.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:53.250Z,1513256393.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:53.264Z,1513256393.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:53.669Z,1513256393.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:53.714Z,1513256393.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:54.048Z,1513256394.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:54.064Z,1513256394.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:54.457Z,1513256394.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:54.472Z,1513256394.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:54.854Z,1513256394.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:54.878Z,1513256394.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:55.260Z,1513256395.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:55.276Z,1513256395.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:55.662Z,1513256395.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:55.683Z,1513256395.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:56.051Z,1513256396.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:56.066Z,1513256396.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:56.461Z,1513256396.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:56.476Z,1513256396.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:56.850Z,1513256396.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:56.911Z,1513256396.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:57.239Z,1513256397.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:57.271Z,1513256397.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:57.654Z,1513256397.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:57.723Z,1513256397.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:58.063Z,1513256398.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:58.079Z,1513256398.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:58.450Z,1513256398.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:58.495Z,1513256398.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:58.852Z,1513256398.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:58.887Z,1513256398.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:59.247Z,1513256399.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:59.287Z,1513256399.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T12:59:59.642Z,1513256399.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T12:59:59.688Z,1513256399.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:00.079Z,1513256400.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:00.112Z,1513256400.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:00.445Z,1513256400.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:00.490Z,1513256400.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:00.851Z,1513256400.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:00.878Z,1513256400.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:01.257Z,1513256401.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:01.272Z,1513256401.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:01.658Z,1513256401.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:01.679Z,1513256401.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:02.041Z,1513256402.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:02.060Z,1513256402.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:02.455Z,1513256402.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:02.470Z,1513256402.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:02.847Z,1513256402.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:02.873Z,1513256402.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:03.264Z,1513256403.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:03.295Z,1513256403.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:03.657Z,1513256403.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:03.672Z,1513256403.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:04.063Z,1513256404.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:04.078Z,1513256404.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:04.463Z,1513256404.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:04.478Z,1513256404.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:04.840Z,1513256404.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:04.875Z,1513256404.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:05.239Z,1513256405.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:05.262Z,1513256405.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:05.636Z,1513256405.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:05.651Z,1513256405.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:06.039Z,1513256406.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:06.054Z,1513256406.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:06.478Z,1513256406.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:06.539Z,1513256406.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:06.858Z,1513256406.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:06.883Z,1513256406.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:07.262Z,1513256407.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:07.286Z,1513256407.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:07.657Z,1513256407.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:07.680Z,1513256407.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:08.036Z,1513256408.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:08.059Z,1513256408.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:08.449Z,1513256408.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:08.464Z,1513256408.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:08.852Z,1513256408.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:08.903Z,1513256408.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:09.245Z,1513256409.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:09.267Z,1513256409.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:09.682Z,1513256409.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:09.715Z,1513256409.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:10.053Z,1513256410.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:10.071Z,1513256410.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:10.454Z,1513256410.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:10.469Z,1513256410.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:10.880Z,1513256410.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:10.917Z,1513256410.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:11.251Z,1513256411.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:11.266Z,1513256411.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:11.641Z,1513256411.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:11.668Z,1513256411.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:12.047Z,1513256412.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:12.063Z,1513256412.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:12.447Z,1513256412.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:12.468Z,1513256412.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:12.880Z,1513256412.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:12.916Z,1513256412.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:13.253Z,1513256413.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:13.282Z,1513256413.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:13.664Z,1513256413.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:13.679Z,1513256413.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:14.036Z,1513256414.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:14.051Z,1513256414.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:14.442Z,1513256414.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:14.483Z,1513256414.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:14.844Z,1513256414.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:14.879Z,1513256414.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:15.243Z,1513256415.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:15.274Z,1513256415.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:15.653Z,1513256415.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:15.682Z,1513256415.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:16.086Z,1513256416.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:16.106Z,1513256416.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:16.450Z,1513256416.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:16.481Z,1513256416.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:16.845Z,1513256416.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:16.860Z,1513256416.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:17.245Z,1513256417.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:17.260Z,1513256417.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:17.656Z,1513256417.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:17.707Z,1513256417.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:18.048Z,1513256418.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:18.063Z,1513256418.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:18.456Z,1513256418.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:18.490Z,1513256418.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:18.494Z,1513256418.494 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T12:55:18.5Z
2017-12-14T13:00:18.494Z,1513256418.494 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:00:18.494Z,1513256418.494 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:00:18.862Z,1513256418.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:18.894Z,1513256418.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:19.749Z,1513256419.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:19.764Z,1513256419.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:22.955Z,1513256422.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:23.031Z,1513256423.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:23.117Z,1513256423.117 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0288.lzma
2017-12-14T13:00:23.144Z,1513256423.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:23.195Z,1513256423.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:23.503Z,1513256423.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:23.543Z,1513256423.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:24.300Z,1513256424.300 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0288.lzma.bak
2017-12-14T13:00:24.300Z,1513256424.300 [DataOverHttps](INFO): SBD MOMSN=5438746
2017-12-14T13:00:24.348Z,1513256424.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:24.375Z,1513256424.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:25.337Z,1513256425.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:25.397Z,1513256425.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:25.496Z,1513256425.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:25.511Z,1513256425.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:29.002Z,1513256429.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:29.024Z,1513256429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:29.170Z,1513256429.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:29.208Z,1513256429.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:29.497Z,1513256429.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:29.604Z,1513256429.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:29.901Z,1513256429.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:29.916Z,1513256429.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:30.302Z,1513256430.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:30.316Z,1513256430.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:30.706Z,1513256430.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:30.721Z,1513256430.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:34.110Z,1513256434.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:34.155Z,1513256434.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:34.258Z,1513256434.258 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0289.lzma
2017-12-14T13:00:34.325Z,1513256434.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:34.353Z,1513256434.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:34.627Z,1513256434.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:34.667Z,1513256434.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:34.988Z,1513256434.988 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0289.lzma.bak
2017-12-14T13:00:34.988Z,1513256434.988 [DataOverHttps](INFO): SBD MOMSN=5438748
2017-12-14T13:00:35.030Z,1513256435.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:35.064Z,1513256435.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:36.141Z,1513256436.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:36.156Z,1513256436.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:36.159Z,1513256436.159 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:00:36.159Z,1513256436.159 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:00:36.159Z,1513256436.159 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:00:36.295Z,1513256436.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:36.331Z,1513256436.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:39.669Z,1513256439.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:39.692Z,1513256439.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:39.819Z,1513256439.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:39.842Z,1513256439.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:40.151Z,1513256440.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:40.190Z,1513256440.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:40.191Z,1513256440.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 249
2017-12-14T13:00:40.191Z,1513256440.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:00:40.192Z,1513256440.192 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:40.193Z,1513256440.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 249
2017-12-14T13:00:40.193Z,1513256440.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:00:40.195Z,1513256440.195 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:40.195Z,1513256440.195 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 249
2017-12-14T13:00:40.195Z,1513256440.195 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:00:40.214Z,1513256440.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:00:40.214Z,1513256440.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:00:40.215Z,1513256440.215 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:00:40.552Z,1513256440.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:40.613Z,1513256440.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:00:40.614Z,1513256440.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 249
2017-12-14T13:00:40.614Z,1513256440.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:00:40.614Z,1513256440.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 249
2017-12-14T13:00:40.615Z,1513256440.615 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:00:40.615Z,1513256440.615 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 249
2017-12-14T13:00:40.976Z,1513256440.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:41.007Z,1513256441.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:00:41.008Z,1513256441.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:00:41.008Z,1513256441.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:00:41.009Z,1513256441.009 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:00:41.009Z,1513256441.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:00:41.009Z,1513256441.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:00:41.010Z,1513256441.010 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:00:41.010Z,1513256441.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:00:41.011Z,1513256441.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:00:41.339Z,1513256441.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:41.365Z,1513256441.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:41.762Z,1513256441.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:41.779Z,1513256441.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:42.163Z,1513256442.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:42.183Z,1513256442.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:42.597Z,1513256442.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:42.636Z,1513256442.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:42.948Z,1513256442.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:42.980Z,1513256442.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:43.344Z,1513256443.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:43.376Z,1513256443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:43.744Z,1513256443.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:43.759Z,1513256443.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:44.197Z,1513256444.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:44.254Z,1513256444.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:44.608Z,1513256444.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:44.632Z,1513256444.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:44.965Z,1513256444.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:45.008Z,1513256445.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:45.356Z,1513256445.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:45.384Z,1513256445.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:45.750Z,1513256445.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:45.766Z,1513256445.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:46.148Z,1513256446.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:46.266Z,1513256446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:46.558Z,1513256446.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:46.592Z,1513256446.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:46.959Z,1513256446.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:46.980Z,1513256446.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:47.366Z,1513256447.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:47.381Z,1513256447.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:47.740Z,1513256447.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:47.816Z,1513256447.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:48.140Z,1513256448.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:48.248Z,1513256448.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:48.550Z,1513256448.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:48.630Z,1513256448.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:48.971Z,1513256448.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:48.993Z,1513256448.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:49.354Z,1513256449.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:49.388Z,1513256449.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:49.749Z,1513256449.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:49.768Z,1513256449.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:50.139Z,1513256450.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:50.169Z,1513256450.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:50.549Z,1513256450.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:50.596Z,1513256450.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:50.968Z,1513256450.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:50.991Z,1513256450.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:51.354Z,1513256451.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:51.494Z,1513256451.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:51.744Z,1513256451.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:51.786Z,1513256451.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:52.144Z,1513256452.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:52.180Z,1513256452.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:52.559Z,1513256452.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:52.597Z,1513256452.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:52.954Z,1513256452.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:52.980Z,1513256452.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:53.350Z,1513256453.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:53.377Z,1513256453.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:53.745Z,1513256453.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:53.760Z,1513256453.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:54.142Z,1513256454.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:54.158Z,1513256454.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:54.560Z,1513256454.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:54.632Z,1513256454.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:54.962Z,1513256454.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:55.036Z,1513256455.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:55.361Z,1513256455.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:55.404Z,1513256455.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:55.747Z,1513256455.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:55.761Z,1513256455.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:56.149Z,1513256456.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:56.163Z,1513256456.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:56.586Z,1513256456.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:56.670Z,1513256456.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:56.971Z,1513256456.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:57.003Z,1513256457.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:57.354Z,1513256457.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:57.388Z,1513256457.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:57.758Z,1513256457.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:57.884Z,1513256457.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:58.151Z,1513256458.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:58.176Z,1513256458.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:58.595Z,1513256458.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:58.619Z,1513256458.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:58.953Z,1513256458.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:58.995Z,1513256458.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:59.353Z,1513256459.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:59.375Z,1513256459.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:00:59.748Z,1513256459.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:00:59.763Z,1513256459.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:00.140Z,1513256460.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:00.162Z,1513256460.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:00.554Z,1513256460.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:00.568Z,1513256460.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:00.967Z,1513256460.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:01.015Z,1513256461.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:01.350Z,1513256461.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:01.433Z,1513256461.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:01.739Z,1513256461.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:01.777Z,1513256461.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:02.143Z,1513256462.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:02.184Z,1513256462.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:02.550Z,1513256462.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:02.565Z,1513256462.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:02.961Z,1513256462.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:02.995Z,1513256462.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:03.354Z,1513256463.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:03.406Z,1513256463.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:03.754Z,1513256463.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:03.793Z,1513256463.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:04.167Z,1513256464.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:04.311Z,1513256464.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:04.551Z,1513256464.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:04.591Z,1513256464.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:04.961Z,1513256464.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:04.994Z,1513256464.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:05.471Z,1513256465.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:05.523Z,1513256465.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:05.740Z,1513256465.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:05.768Z,1513256465.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:06.140Z,1513256466.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:06.175Z,1513256466.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:06.539Z,1513256466.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:06.560Z,1513256466.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:06.948Z,1513256466.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:06.987Z,1513256466.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:07.343Z,1513256467.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:07.359Z,1513256467.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:07.757Z,1513256467.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:07.791Z,1513256467.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:08.161Z,1513256468.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:08.199Z,1513256468.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:08.550Z,1513256468.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:08.603Z,1513256468.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:08.939Z,1513256468.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:09.005Z,1513256469.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:09.344Z,1513256469.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:09.359Z,1513256469.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:09.743Z,1513256469.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:09.797Z,1513256469.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:10.146Z,1513256470.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:10.191Z,1513256470.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:10.612Z,1513256470.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:10.663Z,1513256470.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:10.966Z,1513256470.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:11.109Z,1513256471.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:11.350Z,1513256471.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:11.396Z,1513256471.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:11.748Z,1513256471.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:11.763Z,1513256471.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:12.147Z,1513256472.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:12.167Z,1513256472.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:12.572Z,1513256472.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:12.646Z,1513256472.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:12.965Z,1513256472.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:13.004Z,1513256473.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:13.362Z,1513256473.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:13.384Z,1513256473.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:13.740Z,1513256473.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:13.767Z,1513256473.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:14.143Z,1513256474.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:14.170Z,1513256474.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:14.548Z,1513256474.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:14.578Z,1513256474.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:14.967Z,1513256474.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:15.023Z,1513256475.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:15.408Z,1513256475.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:15.442Z,1513256475.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:15.745Z,1513256475.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:15.785Z,1513256475.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:16.145Z,1513256476.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:16.267Z,1513256476.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:16.561Z,1513256476.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:16.634Z,1513256476.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:16.968Z,1513256476.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:17.017Z,1513256477.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:17.348Z,1513256477.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:17.383Z,1513256477.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:17.766Z,1513256477.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:17.796Z,1513256477.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:18.166Z,1513256478.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:18.273Z,1513256478.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:18.560Z,1513256478.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:18.643Z,1513256478.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:18.955Z,1513256478.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:19.047Z,1513256479.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:19.353Z,1513256479.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:19.408Z,1513256479.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:19.745Z,1513256479.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:19.808Z,1513256479.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:20.163Z,1513256480.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:20.299Z,1513256480.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:20.562Z,1513256480.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:20.583Z,1513256480.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:20.975Z,1513256480.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:21.038Z,1513256481.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:21.396Z,1513256481.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:21.443Z,1513256481.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:21.761Z,1513256481.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:21.832Z,1513256481.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:22.143Z,1513256482.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:22.186Z,1513256482.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:22.540Z,1513256482.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:22.575Z,1513256482.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:22.959Z,1513256482.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:22.981Z,1513256482.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:23.376Z,1513256483.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:23.393Z,1513256483.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:23.774Z,1513256483.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:23.851Z,1513256483.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:24.158Z,1513256484.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:24.222Z,1513256484.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:24.597Z,1513256484.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:24.656Z,1513256484.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:24.952Z,1513256484.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:24.980Z,1513256484.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:25.343Z,1513256485.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:25.379Z,1513256485.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:25.744Z,1513256485.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:25.759Z,1513256485.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:26.144Z,1513256486.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:26.159Z,1513256486.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:26.628Z,1513256486.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:26.789Z,1513256486.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:26.984Z,1513256486.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:27.054Z,1513256487.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:27.402Z,1513256487.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:27.425Z,1513256487.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:27.798Z,1513256487.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:27.827Z,1513256487.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:28.169Z,1513256488.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:28.278Z,1513256488.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:28.562Z,1513256488.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:28.612Z,1513256488.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:28.990Z,1513256488.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:29.038Z,1513256489.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:29.416Z,1513256489.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:29.470Z,1513256489.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:29.779Z,1513256489.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:29.873Z,1513256489.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:30.249Z,1513256490.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:30.356Z,1513256490.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:30.593Z,1513256490.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:30.647Z,1513256490.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:30.969Z,1513256490.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:31.076Z,1513256491.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:31.379Z,1513256491.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:31.432Z,1513256491.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:31.776Z,1513256491.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:31.846Z,1513256491.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:32.173Z,1513256492.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:32.278Z,1513256492.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:32.599Z,1513256492.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:32.716Z,1513256492.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:32.987Z,1513256492.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:33.028Z,1513256493.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:33.376Z,1513256493.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:33.392Z,1513256493.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:33.815Z,1513256493.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:33.848Z,1513256493.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:34.180Z,1513256494.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:34.287Z,1513256494.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:34.574Z,1513256494.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:34.634Z,1513256494.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:34.989Z,1513256494.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:35.042Z,1513256495.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:35.396Z,1513256495.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:35.437Z,1513256495.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:35.797Z,1513256495.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:35.816Z,1513256495.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:36.209Z,1513256496.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:36.282Z,1513256496.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:36.587Z,1513256496.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:36.630Z,1513256496.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:43.473Z,1513256503.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:01:43.479Z,1513256503.479 [PNI_TCM](ERROR): CRC does not match. Expected:0x31663 got:0x53802
2017-12-14T13:01:43.480Z,1513256503.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x42115 got:0x53806
2017-12-14T13:01:43.480Z,1513256503.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x62724 got:0x53802
2017-12-14T13:01:43.480Z,1513256503.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x42787 got:0x53797
2017-12-14T13:01:43.485Z,1513256503.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x32582 got:0x53817
2017-12-14T13:01:43.486Z,1513256503.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x57665 got:0x53819
2017-12-14T13:01:43.486Z,1513256503.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x26826 got:0x53798
2017-12-14T13:01:43.486Z,1513256503.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x19453 got:0x53786
2017-12-14T13:01:43.487Z,1513256503.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x28302 got:0x53786
2017-12-14T13:01:43.487Z,1513256503.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x24778 got:0x53800
2017-12-14T13:01:43.487Z,1513256503.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x51354 got:0x53821
2017-12-14T13:01:43.488Z,1513256503.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x29158 got:0x53781
2017-12-14T13:01:43.488Z,1513256503.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x25573 got:0x53786
2017-12-14T13:01:43.488Z,1513256503.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x6967 got:0x53809
2017-12-14T13:01:43.493Z,1513256503.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x59539 got:0x53800
2017-12-14T13:01:43.493Z,1513256503.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x5129 got:0x53838
2017-12-14T13:01:43.494Z,1513256503.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x62214 got:0x53805
2017-12-14T13:01:43.524Z,1513256503.524 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2017-12-14T13:01:43.524Z,1513256503.524 [PNI_TCM] Data Fault, FailCount= 1
2017-12-14T13:01:43.524Z,1513256503.524 [PNI_TCM](ERROR): Data Fault
2017-12-14T13:01:43.573Z,1513256503.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.948612 seconds old.
2017-12-14T13:01:43.574Z,1513256503.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:43.575Z,1513256503.575 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.944593 seconds old.
2017-12-14T13:01:43.576Z,1513256503.576 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.944936 seconds old.
2017-12-14T13:01:43.638Z,1513256503.638 [CBIT](ERROR): Data Fault in component: PNI_TCM
2017-12-14T13:01:43.725Z,1513256503.725 [PNI_TCM](INFO): Powering down
2017-12-14T13:01:43.771Z,1513256503.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.146173 seconds old.
2017-12-14T13:01:43.774Z,1513256503.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:43.776Z,1513256503.776 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.145069 seconds old.
2017-12-14T13:01:43.801Z,1513256503.801 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.170007 seconds old.
2017-12-14T13:01:44.090Z,1513256504.090 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2017-12-14T13:01:44.090Z,1513256504.090 [PNI_TCM] Hardware Fault, FailCount= 1
2017-12-14T13:01:44.091Z,1513256504.091 [PNI_TCM](ERROR): Hardware Fault
2017-12-14T13:01:44.113Z,1513256504.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.476216 seconds old.
2017-12-14T13:01:44.114Z,1513256504.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:44.115Z,1513256504.115 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.484387 seconds old.
2017-12-14T13:01:44.116Z,1513256504.116 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.484748 seconds old.
2017-12-14T13:01:44.491Z,1513256504.491 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2017-12-14T13:01:44.498Z,1513256504.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.873179 seconds old.
2017-12-14T13:01:44.499Z,1513256504.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:44.500Z,1513256504.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.869478 seconds old.
2017-12-14T13:01:44.521Z,1513256504.521 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.890062 seconds old.
2017-12-14T13:01:44.937Z,1513256504.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.312378 seconds old.
2017-12-14T13:01:44.938Z,1513256504.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:44.939Z,1513256504.939 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.308374 seconds old.
2017-12-14T13:01:44.940Z,1513256504.940 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.308729 seconds old.
2017-12-14T13:01:44.980Z,1513256504.980 [CBIT](INFO): Clearing failed state for component PNI_TCM
2017-12-14T13:01:44.980Z,1513256504.980 [PNI_TCM] No Fault, FailCount= 1
2017-12-14T13:01:45.291Z,1513256505.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.666139 seconds old.
2017-12-14T13:01:45.292Z,1513256505.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:45.302Z,1513256505.302 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.662113 seconds old.
2017-12-14T13:01:45.303Z,1513256505.303 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.671709 seconds old.
2017-12-14T13:01:45.698Z,1513256505.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.073254 seconds old.
2017-12-14T13:01:45.699Z,1513256505.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:45.700Z,1513256505.700 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.069240 seconds old.
2017-12-14T13:01:45.701Z,1513256505.701 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.069812 seconds old.
2017-12-14T13:01:46.101Z,1513256506.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.476591 seconds old.
2017-12-14T13:01:46.102Z,1513256506.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:46.103Z,1513256506.103 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.472551 seconds old.
2017-12-14T13:01:46.104Z,1513256506.104 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.472902 seconds old.
2017-12-14T13:01:46.493Z,1513256506.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.868248 seconds old.
2017-12-14T13:01:46.495Z,1513256506.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:46.496Z,1513256506.496 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.865176 seconds old.
2017-12-14T13:01:46.497Z,1513256506.497 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.865682 seconds old.
2017-12-14T13:01:46.897Z,1513256506.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.272776 seconds old.
2017-12-14T13:01:46.899Z,1513256506.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:46.899Z,1513256506.899 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.268786 seconds old.
2017-12-14T13:01:46.901Z,1513256506.901 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.269173 seconds old.
2017-12-14T13:01:47.320Z,1513256507.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.695067 seconds old.
2017-12-14T13:01:47.321Z,1513256507.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:47.322Z,1513256507.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.691153 seconds old.
2017-12-14T13:01:47.323Z,1513256507.323 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.691520 seconds old.
2017-12-14T13:01:47.686Z,1513256507.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.061595 seconds old.
2017-12-14T13:01:47.687Z,1513256507.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:47.688Z,1513256507.688 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.057618 seconds old.
2017-12-14T13:01:47.689Z,1513256507.689 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.058097 seconds old.
2017-12-14T13:01:48.092Z,1513256508.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.467647 seconds old.
2017-12-14T13:01:48.094Z,1513256508.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:48.094Z,1513256508.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.463872 seconds old.
2017-12-14T13:01:48.096Z,1513256508.096 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.464248 seconds old.
2017-12-14T13:01:48.506Z,1513256508.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:48.907Z,1513256508.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:49.300Z,1513256509.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:49.700Z,1513256509.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:50.141Z,1513256510.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:50.495Z,1513256510.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:50.904Z,1513256510.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:51.315Z,1513256511.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:51.713Z,1513256511.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:52.119Z,1513256512.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:52.520Z,1513256512.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:52.899Z,1513256512.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:53.297Z,1513256513.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:53.704Z,1513256513.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:54.095Z,1513256514.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:54.606Z,1513256514.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:54.916Z,1513256514.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:55.313Z,1513256515.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:55.819Z,1513256515.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:56.099Z,1513256516.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:56.543Z,1513256516.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:56.962Z,1513256516.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:57.309Z,1513256517.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:57.747Z,1513256517.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:58.099Z,1513256518.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:58.486Z,1513256518.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:58.888Z,1513256518.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:59.331Z,1513256519.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:01:59.775Z,1513256519.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:00.119Z,1513256520.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:00.517Z,1513256520.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:00.899Z,1513256520.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:01.298Z,1513256521.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:01.702Z,1513256521.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:02.103Z,1513256522.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:02.496Z,1513256522.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:02.971Z,1513256522.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:03.335Z,1513256523.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:03.708Z,1513256523.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:04.106Z,1513256524.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:04.497Z,1513256524.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:04.899Z,1513256524.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:05.303Z,1513256525.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:05.708Z,1513256525.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:06.159Z,1513256526.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:06.513Z,1513256526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:06.907Z,1513256526.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:07.347Z,1513256527.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:07.705Z,1513256527.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:08.108Z,1513256528.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:08.506Z,1513256528.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:08.908Z,1513256528.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:09.370Z,1513256529.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:09.731Z,1513256529.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:10.120Z,1513256530.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:10.503Z,1513256530.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:10.891Z,1513256530.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:11.291Z,1513256531.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:11.722Z,1513256531.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:12.120Z,1513256532.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:12.530Z,1513256532.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:12.919Z,1513256532.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:13.297Z,1513256533.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:13.735Z,1513256533.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:14.103Z,1513256534.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:14.499Z,1513256534.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:14.896Z,1513256534.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:15.300Z,1513256535.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:15.750Z,1513256535.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:16.119Z,1513256536.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:16.507Z,1513256536.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:16.933Z,1513256536.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:17.303Z,1513256537.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:17.715Z,1513256537.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:18.170Z,1513256538.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:18.506Z,1513256538.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:18.896Z,1513256538.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:19.322Z,1513256539.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:19.705Z,1513256539.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:20.115Z,1513256540.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:20.507Z,1513256540.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:20.931Z,1513256540.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:21.327Z,1513256541.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:21.717Z,1513256541.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:22.088Z,1513256542.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:22.492Z,1513256542.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:22.896Z,1513256542.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:23.294Z,1513256543.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:23.730Z,1513256543.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:24.095Z,1513256544.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:24.497Z,1513256544.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:24.894Z,1513256544.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:25.305Z,1513256545.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:25.696Z,1513256545.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:26.095Z,1513256546.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:26.499Z,1513256546.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:26.912Z,1513256546.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:27.313Z,1513256547.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:27.708Z,1513256547.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:28.101Z,1513256548.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:28.536Z,1513256548.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:28.958Z,1513256548.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:29.301Z,1513256549.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:29.714Z,1513256549.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:30.115Z,1513256550.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:30.506Z,1513256550.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:30.907Z,1513256550.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:31.303Z,1513256551.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:31.703Z,1513256551.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:32.119Z,1513256552.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:32.487Z,1513256552.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:32.903Z,1513256552.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:33.300Z,1513256553.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:33.701Z,1513256553.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:34.096Z,1513256554.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:34.496Z,1513256554.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:34.903Z,1513256554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:35.301Z,1513256555.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:35.721Z,1513256555.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:36.119Z,1513256556.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:36.511Z,1513256556.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:36.927Z,1513256556.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:40.475Z,1513256560.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:40.604Z,1513256560.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:40.984Z,1513256560.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:41.419Z,1513256561.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:41.790Z,1513256561.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:42.245Z,1513256562.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:42.579Z,1513256562.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:43.073Z,1513256563.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:43.383Z,1513256563.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:43.777Z,1513256563.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:44.248Z,1513256564.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:44.571Z,1513256564.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:44.999Z,1513256564.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:45.363Z,1513256565.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:45.776Z,1513256565.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:46.160Z,1513256566.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:46.571Z,1513256566.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:46.983Z,1513256566.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:47.376Z,1513256567.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:47.771Z,1513256567.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:48.202Z,1513256568.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:48.631Z,1513256568.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:48.980Z,1513256568.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:49.380Z,1513256569.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:49.775Z,1513256569.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:50.171Z,1513256570.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:50.659Z,1513256570.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:50.964Z,1513256570.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:51.405Z,1513256571.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:51.770Z,1513256571.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:52.172Z,1513256572.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:52.576Z,1513256572.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:52.975Z,1513256572.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:53.356Z,1513256573.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x26521 got:0x7233
2017-12-14T13:02:53.376Z,1513256573.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:53.769Z,1513256573.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:54.172Z,1513256574.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:54.588Z,1513256574.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:54.981Z,1513256574.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:55.385Z,1513256575.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:55.783Z,1513256575.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:56.248Z,1513256576.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:56.564Z,1513256576.564 [PNI_TCM](ERROR): CRC does not match. Expected:0x8638 got:0x204
2017-12-14T13:02:56.597Z,1513256576.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:56.983Z,1513256576.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:57.391Z,1513256577.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:57.804Z,1513256577.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:58.173Z,1513256578.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:58.583Z,1513256578.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:58.980Z,1513256578.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:59.383Z,1513256579.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:02:59.778Z,1513256579.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x44070 got:0x6336
2017-12-14T13:02:59.814Z,1513256579.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:00.183Z,1513256580.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:00.566Z,1513256580.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:01.067Z,1513256581.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:01.374Z,1513256581.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:01.766Z,1513256581.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:02.167Z,1513256582.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:02.667Z,1513256582.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:02.982Z,1513256582.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:03.427Z,1513256583.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:03.763Z,1513256583.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:04.211Z,1513256584.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:04.640Z,1513256584.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:04.965Z,1513256584.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:05.364Z,1513256585.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:05.786Z,1513256585.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:06.274Z,1513256586.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:06.567Z,1513256586.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:06.967Z,1513256586.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:07.441Z,1513256587.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:07.765Z,1513256587.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:08.209Z,1513256588.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:08.573Z,1513256588.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:08.977Z,1513256588.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:09.377Z,1513256589.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:09.770Z,1513256589.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:10.166Z,1513256590.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:10.619Z,1513256590.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:10.984Z,1513256590.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:11.384Z,1513256591.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:11.778Z,1513256591.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:12.259Z,1513256592.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:12.555Z,1513256592.555 [PNI_TCM](ERROR): CRC does not match. Expected:0x52429 got:0x6336
2017-12-14T13:03:12.634Z,1513256592.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:12.986Z,1513256592.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:13.376Z,1513256593.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:13.803Z,1513256593.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:14.175Z,1513256594.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:14.586Z,1513256594.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:14.973Z,1513256594.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:15.371Z,1513256595.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:15.782Z,1513256595.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:16.160Z,1513256596.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:16.622Z,1513256596.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:17.027Z,1513256597.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:17.375Z,1513256597.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:17.779Z,1513256597.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:17.802Z,1513256597.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:18.179Z,1513256598.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:18.598Z,1513256598.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:18.659Z,1513256598.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:18.987Z,1513256598.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:19.013Z,1513256599.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:19.379Z,1513256599.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:19.771Z,1513256599.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:20.256Z,1513256600.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:20.563Z,1513256600.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:20.968Z,1513256600.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:21.364Z,1513256601.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:21.771Z,1513256601.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:22.170Z,1513256602.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:22.572Z,1513256602.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:22.969Z,1513256602.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:23.395Z,1513256603.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:23.774Z,1513256603.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:24.257Z,1513256604.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:24.599Z,1513256604.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:24.976Z,1513256604.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:25.399Z,1513256605.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:25.771Z,1513256605.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:26.251Z,1513256606.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:26.615Z,1513256606.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:26.970Z,1513256606.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:27.377Z,1513256607.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:27.780Z,1513256607.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:28.180Z,1513256608.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:28.583Z,1513256608.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:28.978Z,1513256608.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:29.353Z,1513256609.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:29.808Z,1513256609.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:30.176Z,1513256610.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:30.629Z,1513256610.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:30.985Z,1513256610.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:31.382Z,1513256611.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:31.782Z,1513256611.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:32.163Z,1513256612.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:32.644Z,1513256612.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:33.010Z,1513256613.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:33.390Z,1513256613.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:33.798Z,1513256613.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:34.166Z,1513256614.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:34.600Z,1513256614.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:34.980Z,1513256614.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:35.365Z,1513256615.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:35.766Z,1513256615.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:36.288Z,1513256616.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:36.587Z,1513256616.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:36.976Z,1513256616.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:40.441Z,1513256620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:40.575Z,1513256620.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:40.971Z,1513256620.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:41.355Z,1513256621.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:41.355Z,1513256621.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 250
2017-12-14T13:03:41.355Z,1513256621.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:03:41.388Z,1513256621.388 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:41.389Z,1513256621.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 250
2017-12-14T13:03:41.389Z,1513256621.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:03:41.391Z,1513256621.391 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:41.391Z,1513256621.391 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 250
2017-12-14T13:03:41.391Z,1513256621.391 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:03:41.402Z,1513256621.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:03:41.402Z,1513256621.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:03:41.403Z,1513256621.403 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:03:41.772Z,1513256621.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:03:41.772Z,1513256621.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 250
2017-12-14T13:03:41.773Z,1513256621.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:03:41.773Z,1513256621.773 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 250
2017-12-14T13:03:41.773Z,1513256621.773 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:03:41.773Z,1513256621.773 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 250
2017-12-14T13:03:42.157Z,1513256622.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:03:42.158Z,1513256622.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:03:42.158Z,1513256622.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:03:42.159Z,1513256622.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:03:42.159Z,1513256622.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:03:42.159Z,1513256622.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:03:42.160Z,1513256622.160 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:03:42.160Z,1513256622.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:03:42.160Z,1513256622.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:03:42.589Z,1513256622.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:42.954Z,1513256622.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x63620 got:0x7233
2017-12-14T13:03:42.986Z,1513256622.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:43.363Z,1513256623.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:43.759Z,1513256623.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:44.167Z,1513256624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:44.627Z,1513256624.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:44.999Z,1513256624.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:45.364Z,1513256625.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:45.780Z,1513256625.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:45.810Z,1513256625.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:46.162Z,1513256626.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:46.606Z,1513256626.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:46.675Z,1513256626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:46.964Z,1513256626.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:47.009Z,1513256627.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:03:47.381Z,1513256627.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:47.748Z,1513256627.748 [PNI_TCM](ERROR): CRC does not match. Expected:0x35488 got:0x53803
2017-12-14T13:03:47.783Z,1513256627.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:48.142Z,1513256628.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x33179 got:0x48804
2017-12-14T13:03:48.254Z,1513256628.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:48.567Z,1513256628.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:49.034Z,1513256629.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:49.361Z,1513256629.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:49.755Z,1513256629.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:50.150Z,1513256630.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:50.571Z,1513256630.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:50.987Z,1513256630.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:51.361Z,1513256631.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:51.752Z,1513256631.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:52.240Z,1513256632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:52.560Z,1513256632.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:52.965Z,1513256632.965 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T13:03:53.006Z,1513256633.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:53.375Z,1513256633.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:53.771Z,1513256633.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:54.160Z,1513256634.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:54.554Z,1513256634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:54.954Z,1513256634.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:55.372Z,1513256635.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:55.752Z,1513256635.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:56.144Z,1513256636.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:56.556Z,1513256636.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:56.976Z,1513256636.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:57.380Z,1513256637.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:57.750Z,1513256637.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:58.152Z,1513256638.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:58.631Z,1513256638.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:58.964Z,1513256638.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:59.384Z,1513256639.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:59.756Z,1513256639.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:03:59.810Z,1513256639.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:00.160Z,1513256640.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:00.606Z,1513256640.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:00.631Z,1513256640.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:00.966Z,1513256640.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:01.009Z,1513256641.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:01.344Z,1513256641.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:01.775Z,1513256641.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:02.171Z,1513256642.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:02.572Z,1513256642.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:02.954Z,1513256642.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:03.407Z,1513256643.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:03.768Z,1513256643.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:04.159Z,1513256644.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:04.575Z,1513256644.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:04.991Z,1513256644.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:05.375Z,1513256645.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:05.742Z,1513256645.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x3135 got:0x1858
2017-12-14T13:04:05.775Z,1513256645.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:06.147Z,1513256646.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:06.586Z,1513256646.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:06.952Z,1513256646.952 [PNI_TCM](ERROR): CRC does not match. Expected:0x31738 got:0x16850
2017-12-14T13:04:06.990Z,1513256646.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:07.388Z,1513256647.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:07.770Z,1513256647.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:08.252Z,1513256648.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:08.567Z,1513256648.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:09.012Z,1513256649.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:09.362Z,1513256649.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:09.759Z,1513256649.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:10.163Z,1513256650.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:10.564Z,1513256650.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:10.991Z,1513256650.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:11.375Z,1513256651.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:11.759Z,1513256651.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:12.152Z,1513256652.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:12.641Z,1513256652.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:12.978Z,1513256652.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:13.359Z,1513256653.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:13.752Z,1513256653.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:13.801Z,1513256653.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:14.149Z,1513256654.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:14.598Z,1513256654.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:14.628Z,1513256654.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:14.975Z,1513256654.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:15.017Z,1513256655.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:04:15.350Z,1513256655.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x16343 got:0x18439
2017-12-14T13:04:15.371Z,1513256655.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:15.744Z,1513256655.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:16.178Z,1513256656.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:16.559Z,1513256656.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:16.983Z,1513256656.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:17.371Z,1513256657.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:17.761Z,1513256657.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:18.156Z,1513256658.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:18.565Z,1513256658.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:18.971Z,1513256658.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:19.388Z,1513256659.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:19.742Z,1513256659.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:20.165Z,1513256660.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:20.560Z,1513256660.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:20.993Z,1513256660.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:21.360Z,1513256661.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:21.771Z,1513256661.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:22.152Z,1513256662.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:22.564Z,1513256662.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:22.977Z,1513256662.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:23.364Z,1513256663.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:23.760Z,1513256663.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:24.218Z,1513256664.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:24.569Z,1513256664.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:24.967Z,1513256664.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:25.366Z,1513256665.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:25.768Z,1513256665.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:26.148Z,1513256666.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:26.624Z,1513256666.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:26.973Z,1513256666.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:27.378Z,1513256667.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:27.750Z,1513256667.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:28.150Z,1513256668.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:28.624Z,1513256668.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:28.979Z,1513256668.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:29.351Z,1513256669.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x12610 got:0x10693
2017-12-14T13:04:29.391Z,1513256669.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:29.752Z,1513256669.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:30.151Z,1513256670.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:30.607Z,1513256670.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:30.960Z,1513256670.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:31.442Z,1513256671.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:31.747Z,1513256671.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:32.170Z,1513256672.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:32.587Z,1513256672.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:32.956Z,1513256672.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:33.391Z,1513256673.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:33.760Z,1513256673.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:34.151Z,1513256674.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:34.560Z,1513256674.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:34.975Z,1513256674.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:35.371Z,1513256675.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:35.767Z,1513256675.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:36.159Z,1513256676.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:36.569Z,1513256676.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:37.030Z,1513256677.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:37.378Z,1513256677.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:40.826Z,1513256680.826 [PNI_TCM](ERROR): CRC does not match. Expected:0x16082 got:0x16897
2017-12-14T13:04:40.826Z,1513256680.826 [PNI_TCM](ERROR): CRC does not match. Expected:0x53765 got:0x16897
2017-12-14T13:04:40.826Z,1513256680.826 [PNI_TCM](ERROR): CRC does not match. Expected:0x5142 got:0x16897
2017-12-14T13:04:40.827Z,1513256680.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x41717 got:0x16897
2017-12-14T13:04:40.827Z,1513256680.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x30838 got:0x16897
2017-12-14T13:04:40.827Z,1513256680.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x34866 got:0x16897
2017-12-14T13:04:40.828Z,1513256680.828 [PNI_TCM](ERROR): CRC does not match. Expected:0x15257 got:0x16897
2017-12-14T13:04:40.828Z,1513256680.828 [PNI_TCM](ERROR): CRC does not match. Expected:0x7256 got:0x16897
2017-12-14T13:04:40.847Z,1513256680.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:40.991Z,1513256680.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:41.393Z,1513256681.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:41.838Z,1513256681.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:42.162Z,1513256682.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:42.627Z,1513256682.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:42.969Z,1513256682.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:43.421Z,1513256683.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:43.783Z,1513256683.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:44.179Z,1513256684.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:44.591Z,1513256684.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:44.982Z,1513256684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:45.364Z,1513256685.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:45.788Z,1513256685.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:46.166Z,1513256686.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:46.616Z,1513256686.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:47.004Z,1513256687.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:47.370Z,1513256687.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:47.768Z,1513256687.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:48.179Z,1513256688.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:48.564Z,1513256688.564 [PNI_TCM](ERROR): CRC does not match. Expected:0x32396 got:0x46674
2017-12-14T13:04:48.593Z,1513256688.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:48.980Z,1513256688.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:49.376Z,1513256689.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:49.774Z,1513256689.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:50.246Z,1513256690.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:50.575Z,1513256690.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:50.965Z,1513256690.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:51.369Z,1513256691.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:51.779Z,1513256691.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:52.179Z,1513256692.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:52.579Z,1513256692.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:53.009Z,1513256693.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:53.376Z,1513256693.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:53.787Z,1513256693.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:54.160Z,1513256694.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:54.663Z,1513256694.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:54.987Z,1513256694.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:55.403Z,1513256695.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:55.762Z,1513256695.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:56.232Z,1513256696.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:56.619Z,1513256696.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:56.974Z,1513256696.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:57.428Z,1513256697.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:57.772Z,1513256697.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:58.177Z,1513256698.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:58.584Z,1513256698.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:58.964Z,1513256698.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:59.402Z,1513256699.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:04:59.764Z,1513256699.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:00.166Z,1513256700.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:00.572Z,1513256700.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:00.984Z,1513256700.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:01.378Z,1513256701.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:01.767Z,1513256701.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:02.170Z,1513256702.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:02.627Z,1513256702.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:02.983Z,1513256702.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:03.383Z,1513256703.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:03.830Z,1513256703.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:04.247Z,1513256704.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:04.559Z,1513256704.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x25112 got:0x54813
2017-12-14T13:05:04.589Z,1513256704.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:04.973Z,1513256704.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:05.364Z,1513256705.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:05.807Z,1513256705.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:06.194Z,1513256706.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:06.583Z,1513256706.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:06.969Z,1513256706.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:07.407Z,1513256707.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:07.780Z,1513256707.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:08.158Z,1513256708.158 [PNI_TCM](ERROR): CRC does not match. Expected:0x32345 got:0x384
2017-12-14T13:05:08.209Z,1513256708.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:08.636Z,1513256708.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:08.995Z,1513256708.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:09.386Z,1513256709.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:09.767Z,1513256709.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:10.169Z,1513256710.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:10.638Z,1513256710.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:10.991Z,1513256710.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:11.383Z,1513256711.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:11.779Z,1513256711.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:12.252Z,1513256712.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:12.569Z,1513256712.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:12.959Z,1513256712.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:13.371Z,1513256713.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:13.781Z,1513256713.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:14.179Z,1513256714.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:14.637Z,1513256714.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:14.979Z,1513256714.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:15.383Z,1513256715.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:15.757Z,1513256715.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x46786 got:0x62903
2017-12-14T13:05:15.812Z,1513256715.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:16.172Z,1513256716.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:16.595Z,1513256716.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:17.007Z,1513256717.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:17.390Z,1513256717.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:17.787Z,1513256717.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:18.212Z,1513256718.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:18.613Z,1513256718.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:18.975Z,1513256718.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:19.367Z,1513256719.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:19.770Z,1513256719.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:20.175Z,1513256720.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:20.574Z,1513256720.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:20.964Z,1513256720.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:21.364Z,1513256721.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:21.800Z,1513256721.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:22.179Z,1513256722.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:22.639Z,1513256722.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:22.989Z,1513256722.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:23.368Z,1513256723.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:23.765Z,1513256723.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:24.162Z,1513256724.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:24.650Z,1513256724.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:24.978Z,1513256724.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:25.378Z,1513256725.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:25.770Z,1513256725.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:26.230Z,1513256726.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:26.583Z,1513256726.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:26.987Z,1513256726.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:27.395Z,1513256727.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:27.783Z,1513256727.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:28.257Z,1513256728.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:28.584Z,1513256728.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:28.960Z,1513256728.960 [PNI_TCM](ERROR): CRC does not match. Expected:0x22177 got:0x32768
2017-12-14T13:05:28.999Z,1513256728.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:29.364Z,1513256729.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:29.769Z,1513256729.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:30.175Z,1513256730.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:30.571Z,1513256730.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:30.973Z,1513256730.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:31.376Z,1513256731.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:31.766Z,1513256731.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:32.270Z,1513256732.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:32.568Z,1513256732.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:32.995Z,1513256732.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:33.369Z,1513256733.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:33.768Z,1513256733.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:34.164Z,1513256734.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:34.619Z,1513256734.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:34.983Z,1513256734.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:35.379Z,1513256735.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:35.769Z,1513256735.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:36.178Z,1513256736.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:36.633Z,1513256736.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:36.645Z,1513256736.645 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:05:36.645Z,1513256736.645 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:05:36.645Z,1513256736.645 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:05:36.645Z,1513256736.645 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:05:37.006Z,1513256737.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:37.010Z,1513256737.010 [Default:CheckIn:D] Stopped
2017-12-14T13:05:37.010Z,1513256737.010 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:05:37.390Z,1513256737.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:37.394Z,1513256737.394 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 752.360352 min 
2017-12-14T13:05:37.394Z,1513256737.394 [Default:CheckIn:E] Stopped
2017-12-14T13:05:37.394Z,1513256737.394 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:05:37.394Z,1513256737.394 [Default:CheckIn] Stopped
2017-12-14T13:05:37.395Z,1513256737.395 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:05:37.395Z,1513256737.395 [Default:CheckIn](INFO): Running loop #73
2017-12-14T13:05:37.395Z,1513256737.395 [Default:CheckIn] Running Loop=73
2017-12-14T13:05:37.395Z,1513256737.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:05:37.395Z,1513256737.395 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:05:40.975Z,1513256740.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:41.108Z,1513256741.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:41.503Z,1513256741.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:41.962Z,1513256741.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:42.312Z,1513256742.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:42.679Z,1513256742.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:43.099Z,1513256743.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:43.478Z,1513256743.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:43.938Z,1513256743.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:44.321Z,1513256744.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:44.685Z,1513256744.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:45.136Z,1513256745.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:45.479Z,1513256745.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:45.880Z,1513256745.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:46.310Z,1513256746.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:46.686Z,1513256746.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:47.085Z,1513256747.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:47.480Z,1513256747.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:47.877Z,1513256747.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:48.346Z,1513256748.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:48.695Z,1513256748.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:49.072Z,1513256749.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:49.502Z,1513256749.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:49.899Z,1513256749.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:50.296Z,1513256750.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:50.703Z,1513256750.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:51.088Z,1513256751.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:51.473Z,1513256751.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:51.876Z,1513256751.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:52.315Z,1513256752.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:52.689Z,1513256752.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:53.091Z,1513256753.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:53.485Z,1513256753.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:53.879Z,1513256753.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:54.315Z,1513256754.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:54.715Z,1513256754.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:55.079Z,1513256755.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:55.478Z,1513256755.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:55.884Z,1513256755.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:56.319Z,1513256756.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:56.684Z,1513256756.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:57.079Z,1513256757.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:57.479Z,1513256757.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:57.876Z,1513256757.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:58.322Z,1513256758.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:58.691Z,1513256758.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:59.090Z,1513256759.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:59.490Z,1513256759.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:05:59.880Z,1513256759.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:00.318Z,1513256760.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:00.684Z,1513256760.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:01.108Z,1513256761.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:01.483Z,1513256761.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:01.899Z,1513256761.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:02.319Z,1513256762.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:02.746Z,1513256762.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:03.080Z,1513256763.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:03.482Z,1513256763.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:03.881Z,1513256763.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:04.339Z,1513256764.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:04.743Z,1513256764.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:05.096Z,1513256765.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:05.499Z,1513256765.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:05.907Z,1513256765.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:06.271Z,1513256766.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:06.710Z,1513256766.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:07.070Z,1513256767.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:07.499Z,1513256767.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:07.893Z,1513256767.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:08.316Z,1513256768.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:08.691Z,1513256768.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:09.076Z,1513256769.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:09.471Z,1513256769.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:09.871Z,1513256769.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:10.307Z,1513256770.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:10.751Z,1513256770.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:11.107Z,1513256771.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:11.501Z,1513256771.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:11.873Z,1513256771.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:12.311Z,1513256772.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:12.675Z,1513256772.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:13.075Z,1513256773.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:13.475Z,1513256773.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:13.919Z,1513256773.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:14.322Z,1513256774.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:14.680Z,1513256774.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:15.111Z,1513256775.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:15.476Z,1513256775.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:15.878Z,1513256775.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:16.335Z,1513256776.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:16.703Z,1513256776.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:17.139Z,1513256777.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:17.500Z,1513256777.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:17.906Z,1513256777.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:18.280Z,1513256778.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:18.717Z,1513256778.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:19.127Z,1513256779.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:19.482Z,1513256779.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:19.900Z,1513256779.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:20.315Z,1513256780.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:20.752Z,1513256780.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:21.121Z,1513256781.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:21.507Z,1513256781.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:21.923Z,1513256781.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:22.316Z,1513256782.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:22.715Z,1513256782.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:23.111Z,1513256783.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:23.523Z,1513256783.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:23.907Z,1513256783.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:24.363Z,1513256784.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:24.724Z,1513256784.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:25.130Z,1513256785.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:25.485Z,1513256785.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:25.919Z,1513256785.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:26.403Z,1513256786.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:26.713Z,1513256786.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:27.142Z,1513256787.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:27.479Z,1513256787.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:27.911Z,1513256787.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:28.328Z,1513256788.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:28.720Z,1513256788.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:29.106Z,1513256789.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:29.484Z,1513256789.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:29.886Z,1513256789.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:30.338Z,1513256790.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:30.746Z,1513256790.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:31.108Z,1513256791.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:31.503Z,1513256791.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:31.913Z,1513256791.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:32.355Z,1513256792.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:32.710Z,1513256792.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:33.121Z,1513256793.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:33.511Z,1513256793.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:33.923Z,1513256793.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:34.315Z,1513256794.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:34.727Z,1513256794.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:35.095Z,1513256795.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:35.483Z,1513256795.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:35.923Z,1513256795.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:36.323Z,1513256796.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:36.691Z,1513256796.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:37.125Z,1513256797.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:37.532Z,1513256797.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:44.229Z,1513256804.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:44.229Z,1513256804.229 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 251
2017-12-14T13:06:44.229Z,1513256804.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:06:44.300Z,1513256804.300 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:44.300Z,1513256804.300 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 251
2017-12-14T13:06:44.300Z,1513256804.300 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:06:44.319Z,1513256804.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:44.319Z,1513256804.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 251
2017-12-14T13:06:44.319Z,1513256804.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:06:44.363Z,1513256804.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:06:44.363Z,1513256804.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:06:44.363Z,1513256804.363 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:06:44.535Z,1513256804.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:06:44.535Z,1513256804.535 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 251
2017-12-14T13:06:44.535Z,1513256804.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:06:44.536Z,1513256804.536 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 251
2017-12-14T13:06:44.536Z,1513256804.536 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:06:44.536Z,1513256804.536 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 251
2017-12-14T13:06:44.882Z,1513256804.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:06:44.882Z,1513256804.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:06:44.883Z,1513256804.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:06:44.883Z,1513256804.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:06:44.883Z,1513256804.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:06:44.884Z,1513256804.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:06:44.884Z,1513256804.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:06:44.884Z,1513256804.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:06:44.889Z,1513256804.889 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:06:45.276Z,1513256805.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:45.659Z,1513256805.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:46.056Z,1513256806.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:46.457Z,1513256806.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:46.869Z,1513256806.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:47.279Z,1513256807.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:47.698Z,1513256807.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:48.087Z,1513256808.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:48.456Z,1513256808.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:48.855Z,1513256808.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:49.246Z,1513256809.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:49.675Z,1513256809.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:50.052Z,1513256810.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:50.466Z,1513256810.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:50.856Z,1513256810.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:51.286Z,1513256811.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:51.665Z,1513256811.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:52.036Z,1513256812.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:52.442Z,1513256812.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:52.843Z,1513256812.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:53.295Z,1513256813.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:53.668Z,1513256813.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:54.086Z,1513256814.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:54.470Z,1513256814.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:54.843Z,1513256814.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:55.242Z,1513256815.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:55.639Z,1513256815.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:56.041Z,1513256816.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:56.447Z,1513256816.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:56.895Z,1513256816.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:57.250Z,1513256817.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:57.643Z,1513256817.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:58.038Z,1513256818.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:58.439Z,1513256818.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:58.849Z,1513256818.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:59.241Z,1513256819.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:06:59.679Z,1513256819.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:00.044Z,1513256820.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:00.476Z,1513256820.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:00.851Z,1513256820.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:01.271Z,1513256821.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:01.649Z,1513256821.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:02.053Z,1513256822.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:02.451Z,1513256822.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:02.855Z,1513256822.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:03.258Z,1513256823.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:03.653Z,1513256823.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:04.035Z,1513256824.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:04.455Z,1513256824.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:04.863Z,1513256824.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:05.256Z,1513256825.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:05.659Z,1513256825.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:06.059Z,1513256826.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:06.457Z,1513256826.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:06.876Z,1513256826.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:07.236Z,1513256827.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:07.637Z,1513256827.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:08.037Z,1513256828.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:08.463Z,1513256828.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:08.864Z,1513256828.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:09.272Z,1513256829.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:09.664Z,1513256829.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:10.091Z,1513256830.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:10.483Z,1513256830.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:10.843Z,1513256830.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:11.243Z,1513256831.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:11.644Z,1513256831.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:12.094Z,1513256832.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:12.444Z,1513256832.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:12.890Z,1513256832.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:13.243Z,1513256833.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:13.678Z,1513256833.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:14.043Z,1513256834.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:14.447Z,1513256834.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:14.852Z,1513256834.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:15.252Z,1513256835.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:15.651Z,1513256835.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:16.039Z,1513256836.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:16.524Z,1513256836.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:16.856Z,1513256836.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:17.256Z,1513256837.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:17.658Z,1513256837.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:18.056Z,1513256838.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:18.459Z,1513256838.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:18.858Z,1513256838.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:19.255Z,1513256839.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:19.636Z,1513256839.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:20.040Z,1513256840.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:20.527Z,1513256840.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:20.841Z,1513256840.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:21.272Z,1513256841.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:21.714Z,1513256841.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:22.043Z,1513256842.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:22.446Z,1513256842.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:22.892Z,1513256842.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:23.243Z,1513256843.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:23.648Z,1513256843.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:24.048Z,1513256844.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:24.491Z,1513256844.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:24.847Z,1513256844.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:25.240Z,1513256845.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:25.640Z,1513256845.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:26.093Z,1513256846.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:26.447Z,1513256846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:26.867Z,1513256846.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:27.263Z,1513256847.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:27.657Z,1513256847.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:28.030Z,1513256848.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:28.434Z,1513256848.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:28.838Z,1513256848.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:29.330Z,1513256849.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:29.667Z,1513256849.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:30.064Z,1513256850.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:30.462Z,1513256850.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:30.849Z,1513256850.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:31.240Z,1513256851.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:31.645Z,1513256851.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:32.041Z,1513256852.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:32.482Z,1513256852.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:32.879Z,1513256852.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:33.259Z,1513256853.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:33.718Z,1513256853.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:34.051Z,1513256854.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:34.452Z,1513256854.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:34.886Z,1513256854.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:35.247Z,1513256855.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:35.731Z,1513256855.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:36.055Z,1513256856.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:36.455Z,1513256856.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:36.837Z,1513256856.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:37.253Z,1513256857.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:37.631Z,1513256857.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:41.203Z,1513256861.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:41.327Z,1513256861.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:41.702Z,1513256861.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:42.159Z,1513256862.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:42.500Z,1513256862.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:42.881Z,1513256862.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:43.278Z,1513256863.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:43.677Z,1513256863.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:44.106Z,1513256864.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:44.487Z,1513256864.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:44.894Z,1513256864.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:45.337Z,1513256865.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:45.687Z,1513256865.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:46.088Z,1513256866.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:46.484Z,1513256866.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:46.879Z,1513256866.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:47.279Z,1513256867.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:47.704Z,1513256867.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:48.075Z,1513256868.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:48.507Z,1513256868.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:48.881Z,1513256868.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:49.275Z,1513256869.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:49.676Z,1513256869.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:50.072Z,1513256870.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:50.479Z,1513256870.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:50.888Z,1513256870.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:51.280Z,1513256871.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:51.704Z,1513256871.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:52.076Z,1513256872.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:52.479Z,1513256872.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:52.891Z,1513256872.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:53.282Z,1513256873.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:53.689Z,1513256873.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:54.099Z,1513256874.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:54.497Z,1513256874.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:54.899Z,1513256874.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:55.282Z,1513256875.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:55.687Z,1513256875.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:56.107Z,1513256876.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:56.512Z,1513256876.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:56.887Z,1513256876.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:57.315Z,1513256877.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:57.680Z,1513256877.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:58.139Z,1513256878.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:58.478Z,1513256878.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:58.876Z,1513256878.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:59.276Z,1513256879.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:07:59.676Z,1513256879.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:00.076Z,1513256880.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:00.476Z,1513256880.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:00.876Z,1513256880.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:01.330Z,1513256881.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:01.674Z,1513256881.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:02.075Z,1513256882.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:02.479Z,1513256882.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:02.888Z,1513256882.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:03.287Z,1513256883.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:03.684Z,1513256883.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:04.083Z,1513256884.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:04.503Z,1513256884.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:04.883Z,1513256884.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:05.283Z,1513256885.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:05.695Z,1513256885.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:06.089Z,1513256886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:06.526Z,1513256886.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:06.876Z,1513256886.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:07.276Z,1513256887.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:07.700Z,1513256887.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:08.089Z,1513256888.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:08.478Z,1513256888.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:08.890Z,1513256888.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:09.288Z,1513256889.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:09.690Z,1513256889.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:10.079Z,1513256890.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:10.484Z,1513256890.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:10.911Z,1513256890.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:11.276Z,1513256891.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:11.706Z,1513256891.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:12.084Z,1513256892.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:12.488Z,1513256892.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:12.885Z,1513256892.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:13.295Z,1513256893.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:13.683Z,1513256893.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:14.147Z,1513256894.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:14.467Z,1513256894.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:14.892Z,1513256894.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:15.303Z,1513256895.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:15.705Z,1513256895.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:16.072Z,1513256896.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:16.473Z,1513256896.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:16.875Z,1513256896.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:17.275Z,1513256897.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:17.686Z,1513256897.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:18.119Z,1513256898.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:18.538Z,1513256898.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:18.881Z,1513256898.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:19.327Z,1513256899.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:19.687Z,1513256899.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:20.124Z,1513256900.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:20.534Z,1513256900.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:20.890Z,1513256900.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:21.297Z,1513256901.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:21.690Z,1513256901.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:22.067Z,1513256902.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:22.490Z,1513256902.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:22.906Z,1513256902.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:23.271Z,1513256903.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:23.704Z,1513256903.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:24.094Z,1513256904.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:24.495Z,1513256904.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:24.883Z,1513256904.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:25.277Z,1513256905.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:25.671Z,1513256905.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:26.080Z,1513256906.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:26.475Z,1513256906.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:26.934Z,1513256906.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:27.289Z,1513256907.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:27.689Z,1513256907.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:28.082Z,1513256908.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:28.546Z,1513256908.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:28.881Z,1513256908.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:29.282Z,1513256909.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:29.695Z,1513256909.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:30.147Z,1513256910.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:30.504Z,1513256910.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:30.871Z,1513256910.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:31.271Z,1513256911.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:31.675Z,1513256911.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:32.076Z,1513256912.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:32.475Z,1513256912.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:32.892Z,1513256912.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:33.301Z,1513256913.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:33.684Z,1513256913.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:34.071Z,1513256914.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:34.482Z,1513256914.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:34.879Z,1513256914.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:35.272Z,1513256915.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:35.680Z,1513256915.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:36.083Z,1513256916.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:36.502Z,1513256916.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:36.875Z,1513256916.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:37.316Z,1513256917.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:37.698Z,1513256917.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:41.257Z,1513256921.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:41.375Z,1513256921.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:41.810Z,1513256921.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:42.168Z,1513256922.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:42.583Z,1513256922.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:42.971Z,1513256922.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:43.344Z,1513256923.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:43.747Z,1513256923.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:44.144Z,1513256924.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:44.561Z,1513256924.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:44.991Z,1513256924.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:45.350Z,1513256925.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x35108 got:0x352
2017-12-14T13:08:45.386Z,1513256925.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:45.754Z,1513256925.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:46.144Z,1513256926.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:46.568Z,1513256926.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:46.997Z,1513256926.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:47.368Z,1513256927.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:47.744Z,1513256927.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:48.169Z,1513256928.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:48.547Z,1513256928.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:48.980Z,1513256928.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:49.365Z,1513256929.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:49.763Z,1513256929.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:50.196Z,1513256930.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:50.566Z,1513256930.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:50.980Z,1513256930.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:51.363Z,1513256931.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:51.747Z,1513256931.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:52.146Z,1513256932.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:52.622Z,1513256932.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:52.969Z,1513256932.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:53.348Z,1513256933.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:53.747Z,1513256933.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:54.162Z,1513256934.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:54.637Z,1513256934.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:54.967Z,1513256934.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:55.360Z,1513256935.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:55.757Z,1513256935.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:56.160Z,1513256936.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:56.635Z,1513256936.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:56.967Z,1513256936.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:57.364Z,1513256937.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:57.751Z,1513256937.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:58.153Z,1513256938.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:58.568Z,1513256938.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:58.963Z,1513256938.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:59.379Z,1513256939.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:08:59.800Z,1513256939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:00.165Z,1513256940.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:00.567Z,1513256940.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:00.967Z,1513256940.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:01.360Z,1513256941.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:01.760Z,1513256941.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:02.131Z,1513256942.131 [PNI_TCM](ERROR): CRC does not match. Expected:0x57523 got:0x16897
2017-12-14T13:09:02.154Z,1513256942.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:02.595Z,1513256942.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:03.035Z,1513256943.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:03.376Z,1513256943.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:03.771Z,1513256943.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:04.169Z,1513256944.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:04.584Z,1513256944.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:04.964Z,1513256944.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:05.350Z,1513256945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:05.754Z,1513256945.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:06.147Z,1513256946.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:06.612Z,1513256946.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:06.971Z,1513256946.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:07.370Z,1513256947.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:07.761Z,1513256947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:08.142Z,1513256948.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:08.508Z,1513256948.508 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T13:09:08.508Z,1513256948.508 [NAL9602] Data Fault, FailCount= 4
2017-12-14T13:09:08.509Z,1513256948.509 [NAL9602](ERROR): Data Fault
2017-12-14T13:09:08.627Z,1513256948.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:08.650Z,1513256948.650 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T13:09:08.908Z,1513256948.908 [NAL9602](INFO): Powering down
2017-12-14T13:09:08.969Z,1513256948.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:09.386Z,1513256949.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:09.766Z,1513256949.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:09.778Z,1513256949.778 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T13:09:09.779Z,1513256949.779 [NAL9602] No Fault, FailCount= 4
2017-12-14T13:09:10.129Z,1513256950.129 [PNI_TCM](ERROR): CRC does not match. Expected:0x37303 got:0x16897
2017-12-14T13:09:10.167Z,1513256950.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:10.554Z,1513256950.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:10.961Z,1513256950.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:11.348Z,1513256951.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:11.748Z,1513256951.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:12.158Z,1513256952.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:12.577Z,1513256952.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:12.976Z,1513256952.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:13.339Z,1513256953.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:13.763Z,1513256953.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:14.142Z,1513256954.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:14.544Z,1513256954.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:14.967Z,1513256954.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:15.368Z,1513256955.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:15.773Z,1513256955.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:16.170Z,1513256956.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:16.533Z,1513256956.533 [PNI_TCM](ERROR): CRC does not match. Expected:0x5652 got:0x32768
2017-12-14T13:09:16.552Z,1513256956.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:16.968Z,1513256956.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:16.981Z,1513256956.981 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:09:17.332Z,1513256957.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:17.745Z,1513256957.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:18.148Z,1513256958.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:18.558Z,1513256958.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:18.987Z,1513256958.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:19.352Z,1513256959.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:19.748Z,1513256959.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:20.156Z,1513256960.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:20.625Z,1513256960.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:20.955Z,1513256960.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:21.328Z,1513256961.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x28139 got:0x16701
2017-12-14T13:09:21.363Z,1513256961.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:21.767Z,1513256961.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:22.210Z,1513256962.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:22.625Z,1513256962.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:22.940Z,1513256962.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:23.370Z,1513256963.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:23.744Z,1513256963.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:24.141Z,1513256964.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:24.571Z,1513256964.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:25.013Z,1513256965.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:25.400Z,1513256965.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:25.779Z,1513256965.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:26.151Z,1513256966.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:26.567Z,1513256966.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:26.963Z,1513256966.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:27.359Z,1513256967.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:27.755Z,1513256967.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:28.160Z,1513256968.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:28.603Z,1513256968.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:28.955Z,1513256968.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:29.348Z,1513256969.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:29.757Z,1513256969.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:30.151Z,1513256970.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:30.547Z,1513256970.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:30.955Z,1513256970.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:31.359Z,1513256971.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:31.785Z,1513256971.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:32.156Z,1513256972.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:32.533Z,1513256972.533 [PNI_TCM](ERROR): CRC does not match. Expected:0x5717 got:0x352
2017-12-14T13:09:32.559Z,1513256972.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:32.961Z,1513256972.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:33.361Z,1513256973.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:33.756Z,1513256973.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:34.149Z,1513256974.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:34.640Z,1513256974.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:34.972Z,1513256974.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:35.347Z,1513256975.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:35.745Z,1513256975.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:36.166Z,1513256976.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:36.614Z,1513256976.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:36.947Z,1513256976.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:37.343Z,1513256977.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:37.763Z,1513256977.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:41.196Z,1513256981.196 [NAL9602](INFO): Powering up NAL9602
2017-12-14T13:09:41.237Z,1513256981.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:41.368Z,1513256981.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:41.735Z,1513256981.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:42.117Z,1513256982.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:42.509Z,1513256982.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:42.916Z,1513256982.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:43.315Z,1513256983.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:43.711Z,1513256983.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.114Z,1513256984.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.559Z,1513256984.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.913Z,1513256984.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.913Z,1513256984.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 252
2017-12-14T13:09:44.913Z,1513256984.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:09:44.915Z,1513256984.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.915Z,1513256984.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 252
2017-12-14T13:09:44.915Z,1513256984.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:09:44.918Z,1513256984.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:44.919Z,1513256984.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 252
2017-12-14T13:09:44.919Z,1513256984.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:09:44.938Z,1513256984.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:09:44.938Z,1513256984.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:09:44.938Z,1513256984.938 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:09:45.334Z,1513256985.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:09:45.334Z,1513256985.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 252
2017-12-14T13:09:45.334Z,1513256985.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:09:45.334Z,1513256985.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 252
2017-12-14T13:09:45.335Z,1513256985.335 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:09:45.335Z,1513256985.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 252
2017-12-14T13:09:45.718Z,1513256985.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:09:45.718Z,1513256985.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:09:45.718Z,1513256985.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:09:45.719Z,1513256985.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:09:45.719Z,1513256985.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:09:45.719Z,1513256985.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:09:45.720Z,1513256985.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:09:45.720Z,1513256985.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:09:45.720Z,1513256985.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:09:46.115Z,1513256986.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:46.558Z,1513256986.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:46.946Z,1513256986.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:47.307Z,1513256987.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:47.775Z,1513256987.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:48.118Z,1513256988.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:48.590Z,1513256988.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:48.924Z,1513256988.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:49.294Z,1513256989.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:49.703Z,1513256989.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:50.104Z,1513256990.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:50.504Z,1513256990.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:50.965Z,1513256990.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:51.312Z,1513256991.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:51.725Z,1513256991.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:52.066Z,1513256992.066 [NAL9602](INFO): NAL9602 initialized
2017-12-14T13:09:52.118Z,1513256992.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:52.519Z,1513256992.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:52.950Z,1513256992.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:53.346Z,1513256993.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:53.725Z,1513256993.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:54.150Z,1513256994.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:54.511Z,1513256994.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:54.909Z,1513256994.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:55.315Z,1513256995.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:55.713Z,1513256995.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:56.116Z,1513256996.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:56.511Z,1513256996.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:56.944Z,1513256996.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:57.311Z,1513256997.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:57.710Z,1513256997.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:58.122Z,1513256998.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:58.524Z,1513256998.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:58.950Z,1513256998.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:59.317Z,1513256999.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:09:59.715Z,1513256999.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:00.101Z,1513257000.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:00.558Z,1513257000.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:00.921Z,1513257000.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:01.330Z,1513257001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:01.713Z,1513257001.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:02.116Z,1513257002.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:02.583Z,1513257002.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:02.941Z,1513257002.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:03.328Z,1513257003.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:03.728Z,1513257003.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:04.117Z,1513257004.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:04.509Z,1513257004.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:04.908Z,1513257004.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:05.324Z,1513257005.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:05.736Z,1513257005.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:06.135Z,1513257006.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:06.555Z,1513257006.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:06.986Z,1513257006.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:07.341Z,1513257007.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:07.708Z,1513257007.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:08.107Z,1513257008.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:08.511Z,1513257008.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:08.979Z,1513257008.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:09.325Z,1513257009.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:09.754Z,1513257009.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:10.157Z,1513257010.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:10.549Z,1513257010.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:10.908Z,1513257010.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:11.309Z,1513257011.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:11.717Z,1513257011.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:12.134Z,1513257012.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:12.527Z,1513257012.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:12.923Z,1513257012.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:13.312Z,1513257013.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:13.719Z,1513257013.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:14.100Z,1513257014.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:14.529Z,1513257014.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:14.931Z,1513257014.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:15.335Z,1513257015.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:15.699Z,1513257015.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:16.102Z,1513257016.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:16.645Z,1513257016.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:16.935Z,1513257016.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:17.306Z,1513257017.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:17.734Z,1513257017.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:18.108Z,1513257018.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:18.512Z,1513257018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:18.947Z,1513257018.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:19.308Z,1513257019.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:19.707Z,1513257019.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:20.111Z,1513257020.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:20.531Z,1513257020.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:20.924Z,1513257020.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:21.329Z,1513257021.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:21.712Z,1513257021.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:22.119Z,1513257022.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:22.515Z,1513257022.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:22.948Z,1513257022.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:23.367Z,1513257023.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:23.730Z,1513257023.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:24.117Z,1513257024.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:24.520Z,1513257024.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:24.915Z,1513257024.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:25.322Z,1513257025.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:25.713Z,1513257025.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:26.108Z,1513257026.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:26.518Z,1513257026.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:26.928Z,1513257026.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:27.331Z,1513257027.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:27.713Z,1513257027.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:28.114Z,1513257028.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:28.520Z,1513257028.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:28.914Z,1513257028.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:29.311Z,1513257029.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:29.722Z,1513257029.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:30.128Z,1513257030.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:30.607Z,1513257030.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:30.951Z,1513257030.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:31.318Z,1513257031.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:31.736Z,1513257031.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:32.117Z,1513257032.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:32.606Z,1513257032.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:32.911Z,1513257032.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:33.343Z,1513257033.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:33.700Z,1513257033.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:34.104Z,1513257034.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:34.515Z,1513257034.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:34.907Z,1513257034.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:35.310Z,1513257035.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:35.719Z,1513257035.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:36.137Z,1513257036.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:36.540Z,1513257036.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:36.934Z,1513257036.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:37.303Z,1513257037.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:37.704Z,1513257037.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:37.708Z,1513257037.708 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:05:37.4Z
2017-12-14T13:10:37.708Z,1513257037.708 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:10:37.708Z,1513257037.708 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:10:38.109Z,1513257038.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:42.193Z,1513257042.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:42.326Z,1513257042.326 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0292.lzma
2017-12-14T13:10:42.407Z,1513257042.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:42.775Z,1513257042.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:43.112Z,1513257043.112 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0292.lzma.bak
2017-12-14T13:10:43.112Z,1513257043.112 [DataOverHttps](INFO): SBD MOMSN=5438763
2017-12-14T13:10:43.173Z,1513257043.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:44.288Z,1513257044.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:44.448Z,1513257044.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:47.958Z,1513257047.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:48.102Z,1513257048.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:48.459Z,1513257048.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:48.831Z,1513257048.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:49.229Z,1513257049.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:49.629Z,1513257049.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:53.222Z,1513257053.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:53.295Z,1513257053.295 [DataOverHttps](INFO): Sending 224 bytes from file Logs/20171214T002839/Express0293.lzma
2017-12-14T13:10:53.369Z,1513257053.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:53.736Z,1513257053.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:54.076Z,1513257054.076 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0293.lzma.bak
2017-12-14T13:10:54.076Z,1513257054.076 [DataOverHttps](INFO): SBD MOMSN=5438765
2017-12-14T13:10:54.245Z,1513257054.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:55.421Z,1513257055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:55.424Z,1513257055.424 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:10:55.424Z,1513257055.424 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:10:55.430Z,1513257055.430 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:10:55.547Z,1513257055.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:59.097Z,1513257059.097 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:10:59.097Z,1513257059.097 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:10:59.097Z,1513257059.097 [BPC1](ERROR): Communications Fault
2017-12-14T13:10:59.104Z,1513257059.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:59.150Z,1513257059.150 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:10:59.236Z,1513257059.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:10:59.634Z,1513257059.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:00.039Z,1513257060.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:00.051Z,1513257060.051 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:11:00.052Z,1513257060.052 [BPC1] No Fault, FailCount= 1
2017-12-14T13:11:00.487Z,1513257060.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:00.818Z,1513257060.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:01.216Z,1513257061.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:01.617Z,1513257061.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:02.017Z,1513257062.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:02.458Z,1513257062.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:02.820Z,1513257062.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:03.223Z,1513257063.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:03.627Z,1513257063.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:04.014Z,1513257064.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:04.450Z,1513257064.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:04.816Z,1513257064.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:05.308Z,1513257065.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:05.619Z,1513257065.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:06.021Z,1513257066.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:06.420Z,1513257066.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:06.825Z,1513257066.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:07.220Z,1513257067.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:07.643Z,1513257067.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:08.030Z,1513257068.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:08.418Z,1513257068.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:08.904Z,1513257068.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:09.228Z,1513257069.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:09.630Z,1513257069.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:10.016Z,1513257070.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:10.423Z,1513257070.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:10.867Z,1513257070.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:11.217Z,1513257071.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:11.636Z,1513257071.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:12.039Z,1513257072.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:12.470Z,1513257072.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:12.820Z,1513257072.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:13.224Z,1513257073.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:13.618Z,1513257073.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:14.061Z,1513257074.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:14.423Z,1513257074.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:14.829Z,1513257074.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:15.290Z,1513257075.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:15.633Z,1513257075.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:16.027Z,1513257076.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:16.424Z,1513257076.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:16.828Z,1513257076.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:17.293Z,1513257077.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:17.642Z,1513257077.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:18.085Z,1513257078.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:18.450Z,1513257078.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:18.853Z,1513257078.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:19.219Z,1513257079.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:19.647Z,1513257079.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:20.092Z,1513257080.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:20.495Z,1513257080.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:20.842Z,1513257080.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:21.296Z,1513257081.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:21.719Z,1513257081.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:22.050Z,1513257082.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:22.412Z,1513257082.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:22.853Z,1513257082.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:23.215Z,1513257083.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:23.772Z,1513257083.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:24.019Z,1513257084.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:24.416Z,1513257084.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:24.822Z,1513257084.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:25.214Z,1513257085.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:25.673Z,1513257085.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:26.074Z,1513257086.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:26.426Z,1513257086.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:26.842Z,1513257086.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:27.250Z,1513257087.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:27.643Z,1513257087.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:28.010Z,1513257088.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:28.416Z,1513257088.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:28.816Z,1513257088.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:29.223Z,1513257089.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:29.648Z,1513257089.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:30.046Z,1513257090.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:30.451Z,1513257090.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:30.815Z,1513257090.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:31.266Z,1513257091.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:31.626Z,1513257091.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:32.023Z,1513257092.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:32.432Z,1513257092.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:32.858Z,1513257092.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:33.235Z,1513257093.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:33.629Z,1513257093.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:34.023Z,1513257094.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:34.444Z,1513257094.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:34.857Z,1513257094.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:35.248Z,1513257095.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:35.653Z,1513257095.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:36.103Z,1513257096.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:36.456Z,1513257096.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:36.843Z,1513257096.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:37.260Z,1513257097.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:37.628Z,1513257097.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:38.038Z,1513257098.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:38.433Z,1513257098.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:38.871Z,1513257098.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:39.285Z,1513257099.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:39.670Z,1513257099.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:40.043Z,1513257100.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:40.446Z,1513257100.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:40.839Z,1513257100.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:41.283Z,1513257101.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:41.639Z,1513257101.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:42.071Z,1513257102.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:42.440Z,1513257102.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:42.875Z,1513257102.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:43.310Z,1513257103.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:43.659Z,1513257103.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:44.023Z,1513257104.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:44.456Z,1513257104.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:44.851Z,1513257104.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:45.247Z,1513257105.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:45.654Z,1513257105.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:46.024Z,1513257106.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:46.448Z,1513257106.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:46.851Z,1513257106.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:47.227Z,1513257107.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:47.640Z,1513257107.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:48.060Z,1513257108.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:48.428Z,1513257108.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:48.830Z,1513257108.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:49.240Z,1513257109.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:49.639Z,1513257109.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:50.032Z,1513257110.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:50.463Z,1513257110.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:50.844Z,1513257110.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:51.239Z,1513257111.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:51.639Z,1513257111.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:52.035Z,1513257112.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:52.423Z,1513257112.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:52.876Z,1513257112.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:53.226Z,1513257113.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:53.628Z,1513257113.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:54.039Z,1513257114.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:54.435Z,1513257114.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:54.832Z,1513257114.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:55.222Z,1513257115.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:55.625Z,1513257115.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:56.024Z,1513257116.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:59.586Z,1513257119.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:11:59.731Z,1513257119.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:00.087Z,1513257120.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:00.496Z,1513257120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:00.856Z,1513257120.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:01.254Z,1513257121.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:01.657Z,1513257121.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:02.059Z,1513257122.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:02.491Z,1513257122.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:02.871Z,1513257122.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:03.315Z,1513257123.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:03.668Z,1513257123.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:04.062Z,1513257124.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:04.472Z,1513257124.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:04.906Z,1513257124.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:05.276Z,1513257125.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:05.742Z,1513257125.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:06.055Z,1513257126.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:06.497Z,1513257126.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:06.924Z,1513257126.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:07.287Z,1513257127.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:07.659Z,1513257127.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:08.060Z,1513257128.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:08.487Z,1513257128.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:08.911Z,1513257128.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:09.269Z,1513257129.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:09.667Z,1513257129.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:10.065Z,1513257130.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:10.479Z,1513257130.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:10.879Z,1513257130.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:11.296Z,1513257131.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:11.674Z,1513257131.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:11.786Z,1513257131.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:12.127Z,1513257132.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:12.474Z,1513257132.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:12.581Z,1513257132.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:12.873Z,1513257132.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:12.985Z,1513257132.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:13.269Z,1513257133.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:13.660Z,1513257133.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:13.782Z,1513257133.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:14.059Z,1513257134.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:14.468Z,1513257134.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:14.577Z,1513257134.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:14.903Z,1513257134.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:14.981Z,1513257134.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:15.275Z,1513257135.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:15.659Z,1513257135.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:15.777Z,1513257135.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:16.070Z,1513257136.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:16.469Z,1513257136.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:16.573Z,1513257136.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:16.877Z,1513257136.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:16.977Z,1513257136.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:17.279Z,1513257137.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:17.660Z,1513257137.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:17.774Z,1513257137.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:18.059Z,1513257138.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:18.538Z,1513257138.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:18.569Z,1513257138.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:18.885Z,1513257138.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:18.973Z,1513257138.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:19.291Z,1513257139.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:19.656Z,1513257139.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:19.772Z,1513257139.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:20.060Z,1513257140.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:20.487Z,1513257140.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:20.565Z,1513257140.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:20.867Z,1513257140.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:20.970Z,1513257140.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:21.261Z,1513257141.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:21.714Z,1513257141.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:21.766Z,1513257141.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:22.063Z,1513257142.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:22.466Z,1513257142.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:22.566Z,1513257142.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:22.874Z,1513257142.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:22.981Z,1513257142.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:23.279Z,1513257143.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:23.663Z,1513257143.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:23.778Z,1513257143.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:24.069Z,1513257144.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:24.489Z,1513257144.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:24.575Z,1513257144.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:24.938Z,1513257144.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:25.267Z,1513257145.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:25.370Z,1513257145.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:25.670Z,1513257145.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:26.111Z,1513257146.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:26.165Z,1513257146.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:26.591Z,1513257146.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:26.927Z,1513257146.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:26.962Z,1513257146.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:27.272Z,1513257147.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:27.694Z,1513257147.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:27.757Z,1513257147.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:28.112Z,1513257148.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:28.528Z,1513257148.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:28.554Z,1513257148.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:28.873Z,1513257148.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:29.273Z,1513257149.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:29.349Z,1513257149.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:29.663Z,1513257149.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:30.067Z,1513257150.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:30.146Z,1513257150.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:30.475Z,1513257150.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:30.874Z,1513257150.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:30.942Z,1513257150.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:31.408Z,1513257151.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:31.674Z,1513257151.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:31.726Z,1513257151.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:32.056Z,1513257152.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:32.129Z,1513257152.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:32.523Z,1513257152.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:32.535Z,1513257152.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:32.879Z,1513257152.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:32.945Z,1513257152.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:33.278Z,1513257153.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:33.349Z,1513257153.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:33.682Z,1513257153.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:34.060Z,1513257154.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:34.146Z,1513257154.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:34.487Z,1513257154.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:34.674Z,1513257154.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:34.887Z,1513257154.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:35.279Z,1513257155.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:35.469Z,1513257155.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:35.677Z,1513257155.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:36.080Z,1513257156.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:36.268Z,1513257156.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:36.491Z,1513257156.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:36.896Z,1513257156.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:36.986Z,1513257156.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:37.263Z,1513257157.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:37.665Z,1513257157.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:37.782Z,1513257157.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:38.064Z,1513257158.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:38.493Z,1513257158.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:38.578Z,1513257158.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:38.874Z,1513257158.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:38.985Z,1513257158.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:39.275Z,1513257159.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:39.660Z,1513257159.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:39.782Z,1513257159.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:40.069Z,1513257160.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:40.470Z,1513257160.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:40.577Z,1513257160.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:40.912Z,1513257160.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:40.982Z,1513257160.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:41.279Z,1513257161.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:41.671Z,1513257161.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:41.778Z,1513257161.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:42.072Z,1513257162.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:42.471Z,1513257162.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:42.573Z,1513257162.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:42.882Z,1513257162.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:42.977Z,1513257162.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:43.287Z,1513257163.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:43.682Z,1513257163.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:43.773Z,1513257163.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:44.087Z,1513257164.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:44.460Z,1513257164.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:44.570Z,1513257164.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:44.864Z,1513257164.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:44.973Z,1513257164.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:45.272Z,1513257165.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:45.663Z,1513257165.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:45.770Z,1513257165.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:46.070Z,1513257166.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:46.070Z,1513257166.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 253
2017-12-14T13:12:46.071Z,1513257166.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:12:46.072Z,1513257166.072 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:46.072Z,1513257166.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 253
2017-12-14T13:12:46.072Z,1513257166.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:12:46.074Z,1513257166.074 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:46.075Z,1513257166.075 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 253
2017-12-14T13:12:46.075Z,1513257166.075 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:12:46.098Z,1513257166.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:12:46.099Z,1513257166.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:12:46.099Z,1513257166.099 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:12:46.479Z,1513257166.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:12:46.479Z,1513257166.479 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 253
2017-12-14T13:12:46.480Z,1513257166.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:12:46.480Z,1513257166.480 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 253
2017-12-14T13:12:46.480Z,1513257166.480 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:12:46.480Z,1513257166.480 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 253
2017-12-14T13:12:46.565Z,1513257166.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:46.871Z,1513257166.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:12:46.871Z,1513257166.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:12:46.872Z,1513257166.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:12:46.872Z,1513257166.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:12:46.872Z,1513257166.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:12:46.873Z,1513257166.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:12:46.873Z,1513257166.873 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:12:46.874Z,1513257166.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:12:46.874Z,1513257166.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:12:46.970Z,1513257166.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:47.280Z,1513257167.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:47.689Z,1513257167.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:47.766Z,1513257167.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:48.075Z,1513257168.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:48.479Z,1513257168.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:48.561Z,1513257168.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:48.903Z,1513257168.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:48.965Z,1513257168.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:49.281Z,1513257169.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:49.682Z,1513257169.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:49.763Z,1513257169.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:50.083Z,1513257170.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:50.487Z,1513257170.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:50.559Z,1513257170.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:50.899Z,1513257170.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:50.985Z,1513257170.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:51.265Z,1513257171.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:51.667Z,1513257171.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:51.782Z,1513257171.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:52.059Z,1513257172.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:52.464Z,1513257172.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:52.579Z,1513257172.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:52.877Z,1513257172.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:52.985Z,1513257172.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:53.274Z,1513257173.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:53.666Z,1513257173.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:53.782Z,1513257173.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:54.065Z,1513257174.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:54.473Z,1513257174.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:54.577Z,1513257174.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:54.876Z,1513257174.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:54.981Z,1513257174.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:55.283Z,1513257175.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:55.666Z,1513257175.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:55.777Z,1513257175.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:56.067Z,1513257176.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:56.574Z,1513257176.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:56.977Z,1513257176.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:57.773Z,1513257177.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:58.569Z,1513257178.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:58.973Z,1513257178.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:12:59.544Z,1513257179.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:59.696Z,1513257179.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:12:59.770Z,1513257179.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:00.066Z,1513257180.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:00.447Z,1513257180.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:00.565Z,1513257180.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:00.847Z,1513257180.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:00.969Z,1513257180.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:01.238Z,1513257181.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:01.645Z,1513257181.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:01.765Z,1513257181.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:02.055Z,1513257182.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:02.455Z,1513257182.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:02.563Z,1513257182.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:02.845Z,1513257182.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:02.969Z,1513257182.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:03.239Z,1513257183.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:03.639Z,1513257183.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:03.768Z,1513257183.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:04.043Z,1513257184.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:04.436Z,1513257184.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:04.563Z,1513257184.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:04.855Z,1513257184.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:04.981Z,1513257184.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:05.254Z,1513257185.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:05.655Z,1513257185.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:05.778Z,1513257185.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:06.041Z,1513257186.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:06.476Z,1513257186.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:06.575Z,1513257186.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:06.840Z,1513257186.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:06.989Z,1513257186.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:07.236Z,1513257187.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:07.664Z,1513257187.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:07.785Z,1513257187.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:08.066Z,1513257188.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:08.461Z,1513257188.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:08.581Z,1513257188.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:08.850Z,1513257188.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:08.985Z,1513257188.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:09.238Z,1513257189.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:09.636Z,1513257189.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:09.782Z,1513257189.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:10.043Z,1513257190.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:10.471Z,1513257190.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:10.579Z,1513257190.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:10.859Z,1513257190.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:10.981Z,1513257190.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:11.288Z,1513257191.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:11.644Z,1513257191.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:11.778Z,1513257191.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:12.071Z,1513257192.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:12.432Z,1513257192.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:12.574Z,1513257192.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:12.907Z,1513257192.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:12.978Z,1513257192.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:13.238Z,1513257193.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:13.664Z,1513257193.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:13.773Z,1513257193.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:14.061Z,1513257194.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:14.443Z,1513257194.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:14.569Z,1513257194.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:14.850Z,1513257194.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:14.973Z,1513257194.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:15.242Z,1513257195.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:15.647Z,1513257195.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:15.770Z,1513257195.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:16.099Z,1513257196.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:16.444Z,1513257196.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:16.565Z,1513257196.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:16.859Z,1513257196.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:16.969Z,1513257196.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:17.249Z,1513257197.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:17.652Z,1513257197.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:17.766Z,1513257197.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:18.047Z,1513257198.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:18.448Z,1513257198.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:18.563Z,1513257198.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:18.846Z,1513257198.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:18.973Z,1513257198.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:19.275Z,1513257199.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:19.651Z,1513257199.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:19.769Z,1513257199.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:20.045Z,1513257200.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:20.447Z,1513257200.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:20.568Z,1513257200.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:20.847Z,1513257200.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:20.985Z,1513257200.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:21.279Z,1513257201.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:21.643Z,1513257201.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:21.782Z,1513257201.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:22.039Z,1513257202.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:22.480Z,1513257202.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:22.578Z,1513257202.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:22.852Z,1513257202.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:22.981Z,1513257202.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:23.259Z,1513257203.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:23.644Z,1513257203.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:23.778Z,1513257203.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:24.039Z,1513257204.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:24.448Z,1513257204.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:24.573Z,1513257204.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:24.851Z,1513257204.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:24.977Z,1513257204.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:25.236Z,1513257205.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:25.695Z,1513257205.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:25.774Z,1513257205.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:26.049Z,1513257206.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:26.451Z,1513257206.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:26.569Z,1513257206.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:26.839Z,1513257206.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:26.973Z,1513257206.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:27.271Z,1513257207.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:27.644Z,1513257207.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:27.770Z,1513257207.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:28.034Z,1513257208.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:28.442Z,1513257208.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:28.565Z,1513257208.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:28.894Z,1513257208.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:28.970Z,1513257208.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:29.261Z,1513257209.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:29.659Z,1513257209.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:29.766Z,1513257209.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:30.053Z,1513257210.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:30.453Z,1513257210.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:30.562Z,1513257210.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:30.851Z,1513257210.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:30.965Z,1513257210.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:31.249Z,1513257211.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:31.653Z,1513257211.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:31.762Z,1513257211.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:32.066Z,1513257212.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:32.455Z,1513257212.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:32.559Z,1513257212.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:32.837Z,1513257212.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:32.985Z,1513257212.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:33.286Z,1513257213.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:33.637Z,1513257213.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:33.781Z,1513257213.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:34.041Z,1513257214.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:34.474Z,1513257214.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:34.579Z,1513257214.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:34.852Z,1513257214.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:34.985Z,1513257214.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:35.338Z,1513257215.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:35.646Z,1513257215.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:35.782Z,1513257215.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:36.036Z,1513257216.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:36.449Z,1513257216.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:36.577Z,1513257216.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:36.840Z,1513257216.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:36.981Z,1513257216.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:37.235Z,1513257217.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:37.652Z,1513257217.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:37.777Z,1513257217.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:38.059Z,1513257218.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:38.487Z,1513257218.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:38.574Z,1513257218.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:38.838Z,1513257218.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:38.977Z,1513257218.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:39.242Z,1513257219.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:39.639Z,1513257219.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:39.773Z,1513257219.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:40.041Z,1513257220.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:40.439Z,1513257220.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:40.571Z,1513257220.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:40.852Z,1513257220.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:40.977Z,1513257220.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:41.254Z,1513257221.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:41.663Z,1513257221.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:41.774Z,1513257221.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:42.058Z,1513257222.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:42.457Z,1513257222.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:42.569Z,1513257222.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:42.843Z,1513257222.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:42.973Z,1513257222.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:43.240Z,1513257223.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:43.671Z,1513257223.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:43.769Z,1513257223.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:44.042Z,1513257224.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:44.444Z,1513257224.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:44.565Z,1513257224.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:44.867Z,1513257224.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:44.969Z,1513257224.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:45.235Z,1513257225.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:45.636Z,1513257225.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:45.765Z,1513257225.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:46.048Z,1513257226.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:46.439Z,1513257226.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:46.571Z,1513257226.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:46.851Z,1513257226.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:46.977Z,1513257226.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:47.255Z,1513257227.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:47.655Z,1513257227.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:47.774Z,1513257227.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:48.086Z,1513257228.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:48.439Z,1513257228.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:48.571Z,1513257228.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:48.835Z,1513257228.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:48.977Z,1513257228.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:49.239Z,1513257229.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:49.651Z,1513257229.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:49.773Z,1513257229.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:50.052Z,1513257230.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:50.447Z,1513257230.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:50.569Z,1513257230.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:50.844Z,1513257230.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:50.973Z,1513257230.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:51.282Z,1513257231.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:51.647Z,1513257231.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:51.771Z,1513257231.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:52.043Z,1513257232.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:52.451Z,1513257232.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:52.565Z,1513257232.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:52.855Z,1513257232.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:52.969Z,1513257232.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:53.257Z,1513257233.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:53.654Z,1513257233.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:53.766Z,1513257233.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:54.041Z,1513257234.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:54.490Z,1513257234.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:54.562Z,1513257234.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:54.863Z,1513257234.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:54.965Z,1513257234.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:55.259Z,1513257235.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:55.659Z,1513257235.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:55.762Z,1513257235.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:56.099Z,1513257236.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:56.475Z,1513257236.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:13:56.557Z,1513257236.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:56.961Z,1513257236.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:57.758Z,1513257237.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:58.554Z,1513257238.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:58.957Z,1513257238.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:59.754Z,1513257239.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:13:59.875Z,1513257239.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:00.007Z,1513257240.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:00.403Z,1513257240.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:00.551Z,1513257240.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:00.870Z,1513257240.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:00.981Z,1513257240.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:01.174Z,1513257241.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:01.571Z,1513257241.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:01.778Z,1513257241.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:01.964Z,1513257241.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:02.374Z,1513257242.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:02.575Z,1513257242.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:02.775Z,1513257242.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:02.981Z,1513257242.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:03.172Z,1513257243.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:03.571Z,1513257243.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:03.778Z,1513257243.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:03.970Z,1513257243.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:04.371Z,1513257244.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:04.573Z,1513257244.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:04.777Z,1513257244.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:04.977Z,1513257244.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:05.171Z,1513257245.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:05.576Z,1513257245.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:05.773Z,1513257245.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:05.988Z,1513257245.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:06.376Z,1513257246.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:06.569Z,1513257246.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:06.774Z,1513257246.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:06.973Z,1513257246.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:07.220Z,1513257247.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:07.572Z,1513257247.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:07.770Z,1513257247.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:07.970Z,1513257247.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:08.365Z,1513257248.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:08.566Z,1513257248.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:08.815Z,1513257248.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:08.969Z,1513257248.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:09.187Z,1513257249.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:09.578Z,1513257249.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:09.766Z,1513257249.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:09.967Z,1513257249.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:10.426Z,1513257250.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:10.561Z,1513257250.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:10.777Z,1513257250.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:10.965Z,1513257250.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:11.175Z,1513257251.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:11.587Z,1513257251.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:11.761Z,1513257251.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:11.969Z,1513257251.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:12.369Z,1513257252.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:12.557Z,1513257252.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:12.770Z,1513257252.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:12.961Z,1513257252.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:13.167Z,1513257253.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:13.621Z,1513257253.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:13.758Z,1513257253.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:13.966Z,1513257253.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:14.374Z,1513257254.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:14.555Z,1513257254.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:14.798Z,1513257254.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:14.965Z,1513257254.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:15.172Z,1513257255.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:15.575Z,1513257255.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:15.762Z,1513257255.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:15.978Z,1513257255.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:16.372Z,1513257256.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:16.559Z,1513257256.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:16.823Z,1513257256.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:16.965Z,1513257256.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:17.168Z,1513257257.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:17.573Z,1513257257.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:17.762Z,1513257257.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:17.970Z,1513257257.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:18.379Z,1513257258.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:18.557Z,1513257258.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:18.778Z,1513257258.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:18.961Z,1513257258.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:19.169Z,1513257259.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:19.570Z,1513257259.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:19.758Z,1513257259.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:20.013Z,1513257260.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:20.371Z,1513257260.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:20.553Z,1513257260.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:20.808Z,1513257260.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:20.957Z,1513257260.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:21.185Z,1513257261.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:21.583Z,1513257261.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:21.754Z,1513257261.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:21.960Z,1513257261.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:22.362Z,1513257262.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:22.550Z,1513257262.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:22.791Z,1513257262.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:22.953Z,1513257262.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:23.239Z,1513257263.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:23.569Z,1513257263.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:23.750Z,1513257263.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:23.967Z,1513257263.967 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:14:23.967Z,1513257263.967 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:14:23.967Z,1513257263.967 [BPC1](ERROR): Communications Fault
2017-12-14T13:14:23.991Z,1513257263.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:24.017Z,1513257264.017 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:14:24.375Z,1513257264.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:24.545Z,1513257264.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:24.775Z,1513257264.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:24.949Z,1513257264.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:25.168Z,1513257265.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:25.201Z,1513257265.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:14:25.201Z,1513257265.201 [BPC1] No Fault, FailCount= 1
2017-12-14T13:14:25.615Z,1513257265.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:25.747Z,1513257265.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:25.968Z,1513257265.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:26.364Z,1513257266.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:26.541Z,1513257266.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:26.779Z,1513257266.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:26.945Z,1513257266.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:27.179Z,1513257267.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:27.577Z,1513257267.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:27.742Z,1513257267.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:27.964Z,1513257267.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:28.367Z,1513257268.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:28.539Z,1513257268.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:28.773Z,1513257268.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:28.981Z,1513257268.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:29.170Z,1513257269.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:29.582Z,1513257269.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:29.777Z,1513257269.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:29.983Z,1513257269.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:30.379Z,1513257270.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:30.575Z,1513257270.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:30.776Z,1513257270.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:30.981Z,1513257270.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:31.169Z,1513257271.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:31.571Z,1513257271.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:31.777Z,1513257271.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:31.970Z,1513257271.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:32.374Z,1513257272.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:32.573Z,1513257272.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:32.785Z,1513257272.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:32.977Z,1513257272.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:33.232Z,1513257273.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:33.575Z,1513257273.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:33.774Z,1513257273.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:33.988Z,1513257273.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:34.375Z,1513257274.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:34.569Z,1513257274.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:34.778Z,1513257274.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:34.973Z,1513257274.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:35.171Z,1513257275.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:35.582Z,1513257275.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:35.770Z,1513257275.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:35.979Z,1513257275.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:36.434Z,1513257276.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:36.565Z,1513257276.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:36.756Z,1513257276.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:36.969Z,1513257276.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:37.156Z,1513257277.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:37.559Z,1513257277.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:37.766Z,1513257277.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:37.985Z,1513257277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:38.360Z,1513257278.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:38.561Z,1513257278.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:38.779Z,1513257278.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:38.965Z,1513257278.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:39.182Z,1513257279.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:39.596Z,1513257279.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:39.762Z,1513257279.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:39.984Z,1513257279.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:40.358Z,1513257280.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:40.557Z,1513257280.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:40.763Z,1513257280.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:40.961Z,1513257280.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:41.159Z,1513257281.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:41.595Z,1513257281.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:41.758Z,1513257281.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:41.991Z,1513257281.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:42.390Z,1513257282.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:42.555Z,1513257282.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:42.811Z,1513257282.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:42.965Z,1513257282.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:43.165Z,1513257283.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:43.559Z,1513257283.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:43.762Z,1513257283.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:43.927Z,1513257283.927 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T13:14:43.927Z,1513257283.927 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T13:14:43.927Z,1513257283.927 [DropWeight](ERROR): Hardware Fault
2017-12-14T13:14:43.961Z,1513257283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:43.972Z,1513257283.972 [CBIT](INFO): Critical error at 20171214T131443
2017-12-14T13:14:43.994Z,1513257283.994 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T13:14:43.995Z,1513257283.995 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T13:14:44.367Z,1513257284.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:44.391Z,1513257284.391 [CBIT](INFO): Critical error at 20171214T131443
2017-12-14T13:14:44.562Z,1513257284.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:44.822Z,1513257284.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:44.969Z,1513257284.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:45.179Z,1513257285.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:45.572Z,1513257285.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:45.766Z,1513257285.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:46.027Z,1513257286.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:46.364Z,1513257286.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:46.561Z,1513257286.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:46.793Z,1513257286.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:46.965Z,1513257286.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:47.160Z,1513257287.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:47.571Z,1513257287.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:47.761Z,1513257287.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:47.972Z,1513257287.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:48.372Z,1513257288.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:48.557Z,1513257288.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:48.777Z,1513257288.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:48.961Z,1513257288.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:49.206Z,1513257289.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:49.564Z,1513257289.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:49.757Z,1513257289.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:49.964Z,1513257289.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:50.372Z,1513257290.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:50.553Z,1513257290.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:50.787Z,1513257290.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:50.957Z,1513257290.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:51.181Z,1513257291.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:51.579Z,1513257291.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:51.754Z,1513257291.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:51.970Z,1513257291.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:52.387Z,1513257292.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:52.549Z,1513257292.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:52.779Z,1513257292.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:52.953Z,1513257292.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:53.169Z,1513257293.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:53.579Z,1513257293.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:53.751Z,1513257293.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:53.987Z,1513257293.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:54.375Z,1513257294.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:54.547Z,1513257294.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:54.771Z,1513257294.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:54.953Z,1513257294.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:55.199Z,1513257295.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:55.619Z,1513257295.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:55.750Z,1513257295.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:55.978Z,1513257295.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:56.357Z,1513257296.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:56.548Z,1513257296.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:56.779Z,1513257296.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:14:56.989Z,1513257296.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:57.785Z,1513257297.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:58.582Z,1513257298.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:58.985Z,1513257298.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:14:59.781Z,1513257299.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:00.279Z,1513257300.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:00.426Z,1513257300.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:00.577Z,1513257300.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:00.763Z,1513257300.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:00.981Z,1513257300.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:01.160Z,1513257301.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:01.563Z,1513257301.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:01.778Z,1513257301.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:02.044Z,1513257302.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:02.361Z,1513257302.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:02.576Z,1513257302.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:02.760Z,1513257302.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:02.981Z,1513257302.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:03.167Z,1513257303.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:03.567Z,1513257303.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:03.779Z,1513257303.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:03.955Z,1513257303.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:04.351Z,1513257304.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:04.575Z,1513257304.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:04.756Z,1513257304.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:04.977Z,1513257304.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:05.176Z,1513257305.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:05.568Z,1513257305.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:05.774Z,1513257305.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:06.015Z,1513257306.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:06.362Z,1513257306.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:06.569Z,1513257306.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:06.759Z,1513257306.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:06.973Z,1513257306.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:07.176Z,1513257307.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:07.551Z,1513257307.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:07.770Z,1513257307.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:07.951Z,1513257307.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:08.416Z,1513257308.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:08.566Z,1513257308.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:08.763Z,1513257308.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:08.969Z,1513257308.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:09.199Z,1513257309.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:09.564Z,1513257309.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:09.766Z,1513257309.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:09.955Z,1513257309.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:10.351Z,1513257310.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:10.563Z,1513257310.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:10.763Z,1513257310.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:10.978Z,1513257310.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:11.155Z,1513257311.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:11.611Z,1513257311.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:11.774Z,1513257311.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:11.971Z,1513257311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:12.365Z,1513257312.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:12.571Z,1513257312.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:12.759Z,1513257312.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:13.158Z,1513257313.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:13.370Z,1513257313.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:13.557Z,1513257313.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:13.773Z,1513257313.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:13.951Z,1513257313.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:14.361Z,1513257314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:14.570Z,1513257314.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:14.816Z,1513257314.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:14.973Z,1513257314.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:15.187Z,1513257315.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:15.565Z,1513257315.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:15.770Z,1513257315.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:15.941Z,1513257315.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:16.347Z,1513257316.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:16.565Z,1513257316.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:16.767Z,1513257316.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:16.969Z,1513257316.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:17.151Z,1513257317.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:17.588Z,1513257317.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:17.765Z,1513257317.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:18.030Z,1513257318.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:18.375Z,1513257318.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:18.561Z,1513257318.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:18.751Z,1513257318.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:18.965Z,1513257318.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:19.161Z,1513257319.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:19.555Z,1513257319.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:19.762Z,1513257319.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:19.963Z,1513257319.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:20.350Z,1513257320.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:20.557Z,1513257320.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:20.759Z,1513257320.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:20.961Z,1513257320.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:21.189Z,1513257321.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:21.563Z,1513257321.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:21.757Z,1513257321.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:21.955Z,1513257321.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:22.359Z,1513257322.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:22.553Z,1513257322.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:22.756Z,1513257322.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:22.957Z,1513257322.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:23.155Z,1513257323.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:23.559Z,1513257323.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:23.753Z,1513257323.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:23.972Z,1513257323.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:24.399Z,1513257324.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:24.551Z,1513257324.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:24.759Z,1513257324.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:24.989Z,1513257324.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:25.154Z,1513257325.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:25.563Z,1513257325.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:25.786Z,1513257325.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:25.954Z,1513257325.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:26.369Z,1513257326.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:26.582Z,1513257326.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:26.767Z,1513257326.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:26.985Z,1513257326.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:27.174Z,1513257327.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:27.567Z,1513257327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:27.782Z,1513257327.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:27.969Z,1513257327.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:28.379Z,1513257328.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:28.577Z,1513257328.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:28.774Z,1513257328.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:28.981Z,1513257328.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:29.176Z,1513257329.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:29.572Z,1513257329.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:29.777Z,1513257329.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:29.977Z,1513257329.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:30.395Z,1513257330.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:30.573Z,1513257330.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:30.759Z,1513257330.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:30.977Z,1513257330.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:31.187Z,1513257331.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:31.554Z,1513257331.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:31.774Z,1513257331.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:31.955Z,1513257331.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:32.352Z,1513257332.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:32.571Z,1513257332.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:32.758Z,1513257332.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:32.973Z,1513257332.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:33.163Z,1513257333.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:33.557Z,1513257333.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:33.772Z,1513257333.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:33.994Z,1513257333.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:34.351Z,1513257334.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:34.565Z,1513257334.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:34.768Z,1513257334.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:34.969Z,1513257334.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:35.159Z,1513257335.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:35.575Z,1513257335.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:35.766Z,1513257335.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:35.969Z,1513257335.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:36.362Z,1513257336.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:36.561Z,1513257336.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:36.762Z,1513257336.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:36.965Z,1513257336.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:37.183Z,1513257337.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:37.575Z,1513257337.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:37.762Z,1513257337.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:37.968Z,1513257337.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:38.341Z,1513257338.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:38.562Z,1513257338.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:38.768Z,1513257338.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:38.969Z,1513257338.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:39.167Z,1513257339.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:39.592Z,1513257339.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:39.765Z,1513257339.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:39.944Z,1513257339.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:40.390Z,1513257340.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:40.563Z,1513257340.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:40.752Z,1513257340.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:40.976Z,1513257340.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:41.150Z,1513257341.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:41.555Z,1513257341.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:41.769Z,1513257341.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:41.964Z,1513257341.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:42.365Z,1513257342.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:42.565Z,1513257342.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:42.762Z,1513257342.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:42.969Z,1513257342.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:43.151Z,1513257343.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:43.590Z,1513257343.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:43.766Z,1513257343.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:43.951Z,1513257343.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:44.358Z,1513257344.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:44.561Z,1513257344.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:44.769Z,1513257344.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:44.965Z,1513257344.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:45.175Z,1513257345.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:45.565Z,1513257345.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:45.762Z,1513257345.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:45.959Z,1513257345.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:46.352Z,1513257346.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:46.557Z,1513257346.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:46.782Z,1513257346.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:46.961Z,1513257346.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:47.173Z,1513257347.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:47.173Z,1513257347.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 254
2017-12-14T13:15:47.173Z,1513257347.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:15:47.175Z,1513257347.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:47.175Z,1513257347.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 254
2017-12-14T13:15:47.175Z,1513257347.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:15:47.177Z,1513257347.177 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:47.177Z,1513257347.177 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 254
2017-12-14T13:15:47.177Z,1513257347.177 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:15:47.189Z,1513257347.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:15:47.189Z,1513257347.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:15:47.190Z,1513257347.190 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:15:47.579Z,1513257347.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:15:47.579Z,1513257347.579 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 254
2017-12-14T13:15:47.579Z,1513257347.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:15:47.580Z,1513257347.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 254
2017-12-14T13:15:47.580Z,1513257347.580 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:15:47.580Z,1513257347.580 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 254
2017-12-14T13:15:47.757Z,1513257347.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:47.974Z,1513257347.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:15:47.974Z,1513257347.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:15:47.974Z,1513257347.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:15:47.975Z,1513257347.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:15:47.975Z,1513257347.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:15:47.975Z,1513257347.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:15:47.976Z,1513257347.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:15:47.976Z,1513257347.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:15:47.977Z,1513257347.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:15:48.372Z,1513257348.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:48.556Z,1513257348.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:48.752Z,1513257348.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:48.961Z,1513257348.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:49.151Z,1513257349.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:49.552Z,1513257349.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:49.761Z,1513257349.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:49.953Z,1513257349.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:50.394Z,1513257350.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:50.557Z,1513257350.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:50.756Z,1513257350.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:50.961Z,1513257350.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:51.161Z,1513257351.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:51.605Z,1513257351.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:51.758Z,1513257351.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:51.951Z,1513257351.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:52.360Z,1513257352.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:52.563Z,1513257352.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:52.791Z,1513257352.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:52.985Z,1513257352.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:53.193Z,1513257353.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:53.596Z,1513257353.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:53.781Z,1513257353.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:53.964Z,1513257353.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:54.365Z,1513257354.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:54.582Z,1513257354.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:54.764Z,1513257354.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:54.985Z,1513257354.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:55.155Z,1513257355.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:55.559Z,1513257355.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:55.562Z,1513257355.562 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:15:55.562Z,1513257355.562 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:15:55.562Z,1513257355.562 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:15:55.563Z,1513257355.563 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:15:55.782Z,1513257355.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:55.958Z,1513257355.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:55.966Z,1513257355.966 [Default:CheckIn:D] Stopped
2017-12-14T13:15:55.966Z,1513257355.966 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:15:56.462Z,1513257356.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:56.466Z,1513257356.466 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 762.676237 min 
2017-12-14T13:15:56.466Z,1513257356.466 [Default:CheckIn:E] Stopped
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn] Stopped
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn](INFO): Running loop #74
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn] Running Loop=74
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:15:56.467Z,1513257356.467 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:15:56.578Z,1513257356.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:56.771Z,1513257356.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:56.981Z,1513257356.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:57.179Z,1513257357.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:15:57.777Z,1513257357.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:58.573Z,1513257358.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:58.977Z,1513257358.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:15:59.773Z,1513257359.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:00.569Z,1513257360.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:00.644Z,1513257360.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:00.760Z,1513257360.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:00.973Z,1513257360.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:01.143Z,1513257361.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:01.535Z,1513257361.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:01.769Z,1513257361.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:01.971Z,1513257361.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:02.339Z,1513257362.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:02.565Z,1513257362.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:02.779Z,1513257362.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:02.969Z,1513257362.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:03.149Z,1513257363.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:03.549Z,1513257363.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:03.765Z,1513257363.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:03.939Z,1513257363.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:04.356Z,1513257364.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:04.561Z,1513257364.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:04.741Z,1513257364.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:04.965Z,1513257364.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:05.146Z,1513257365.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:05.553Z,1513257365.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:05.762Z,1513257365.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:06.004Z,1513257366.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:06.346Z,1513257366.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:06.562Z,1513257366.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:06.736Z,1513257366.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:06.989Z,1513257366.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:07.147Z,1513257367.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:07.542Z,1513257367.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:07.785Z,1513257367.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:07.940Z,1513257367.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:08.392Z,1513257368.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:08.582Z,1513257368.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:08.742Z,1513257368.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:09.191Z,1513257369.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:09.378Z,1513257369.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:09.543Z,1513257369.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:09.781Z,1513257369.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:09.956Z,1513257369.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:10.342Z,1513257370.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:10.578Z,1513257370.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:10.741Z,1513257370.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:10.981Z,1513257370.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:11.147Z,1513257371.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:11.555Z,1513257371.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:11.778Z,1513257371.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:11.961Z,1513257371.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:12.351Z,1513257372.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:12.573Z,1513257372.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:12.763Z,1513257372.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:12.980Z,1513257372.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:13.150Z,1513257373.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:13.551Z,1513257373.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:13.773Z,1513257373.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:13.961Z,1513257373.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:14.331Z,1513257374.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:14.569Z,1513257374.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:14.761Z,1513257374.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:14.973Z,1513257374.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:15.206Z,1513257375.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:15.575Z,1513257375.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:15.770Z,1513257375.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:15.964Z,1513257375.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:16.331Z,1513257376.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:16.565Z,1513257376.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:16.741Z,1513257376.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:16.969Z,1513257376.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:17.133Z,1513257377.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:17.563Z,1513257377.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:17.766Z,1513257377.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:17.963Z,1513257377.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:18.367Z,1513257378.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:18.562Z,1513257378.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:18.771Z,1513257378.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:18.965Z,1513257378.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:19.148Z,1513257379.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:19.536Z,1513257379.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:19.764Z,1513257379.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:19.954Z,1513257379.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:20.338Z,1513257380.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:20.559Z,1513257380.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:20.783Z,1513257380.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:20.981Z,1513257380.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:21.164Z,1513257381.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:21.586Z,1513257381.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:21.778Z,1513257381.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:21.939Z,1513257381.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:22.350Z,1513257382.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:22.575Z,1513257382.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:22.790Z,1513257382.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:22.986Z,1513257382.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:23.182Z,1513257383.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:23.557Z,1513257383.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:23.782Z,1513257383.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:23.962Z,1513257383.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:24.414Z,1513257384.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:24.578Z,1513257384.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:24.760Z,1513257384.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:24.982Z,1513257384.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:25.168Z,1513257385.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:25.551Z,1513257385.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:25.778Z,1513257385.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:25.942Z,1513257385.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:26.363Z,1513257386.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:26.574Z,1513257386.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:26.771Z,1513257386.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:26.980Z,1513257386.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:27.173Z,1513257387.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:27.566Z,1513257387.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:27.774Z,1513257387.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:27.959Z,1513257387.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:28.329Z,1513257388.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:28.570Z,1513257388.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:28.764Z,1513257388.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:28.974Z,1513257388.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:29.165Z,1513257389.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:29.571Z,1513257389.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:29.786Z,1513257389.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:29.981Z,1513257389.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:30.374Z,1513257390.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:30.586Z,1513257390.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:30.743Z,1513257390.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:30.990Z,1513257390.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:31.148Z,1513257391.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:31.555Z,1513257391.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:31.786Z,1513257391.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:32.001Z,1513257392.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:32.399Z,1513257392.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:32.585Z,1513257392.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:32.775Z,1513257392.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:32.990Z,1513257392.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:33.170Z,1513257393.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:33.612Z,1513257393.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:33.786Z,1513257393.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:33.973Z,1513257393.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:34.386Z,1513257394.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:34.582Z,1513257394.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:34.795Z,1513257394.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:34.990Z,1513257394.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:35.218Z,1513257395.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:35.560Z,1513257395.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:35.786Z,1513257395.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:35.979Z,1513257395.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:36.355Z,1513257396.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:36.583Z,1513257396.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:36.804Z,1513257396.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:36.990Z,1513257396.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:37.149Z,1513257397.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:37.567Z,1513257397.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:37.786Z,1513257397.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:37.991Z,1513257397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:38.402Z,1513257398.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:38.582Z,1513257398.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:38.819Z,1513257398.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:38.985Z,1513257398.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:39.156Z,1513257399.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:39.552Z,1513257399.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:39.783Z,1513257399.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:39.944Z,1513257399.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:40.340Z,1513257400.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:40.578Z,1513257400.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:40.764Z,1513257400.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:40.982Z,1513257400.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:41.163Z,1513257401.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:41.554Z,1513257401.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:41.778Z,1513257401.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:42.015Z,1513257402.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:42.391Z,1513257402.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:42.579Z,1513257402.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:42.765Z,1513257402.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:42.982Z,1513257402.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:43.163Z,1513257403.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:43.563Z,1513257403.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:43.778Z,1513257403.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:43.939Z,1513257403.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:44.364Z,1513257404.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:44.574Z,1513257404.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:44.776Z,1513257404.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:44.977Z,1513257404.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:45.167Z,1513257405.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:45.580Z,1513257405.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:45.774Z,1513257405.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:45.978Z,1513257405.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:46.392Z,1513257406.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:46.570Z,1513257406.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:46.744Z,1513257406.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:46.974Z,1513257406.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:47.182Z,1513257407.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:47.563Z,1513257407.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:47.770Z,1513257407.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:47.942Z,1513257407.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:48.347Z,1513257408.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:48.567Z,1513257408.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:48.735Z,1513257408.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:48.973Z,1513257408.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:49.144Z,1513257409.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:49.536Z,1513257409.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:49.770Z,1513257409.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:49.986Z,1513257409.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:50.343Z,1513257410.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:50.567Z,1513257410.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:50.752Z,1513257410.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:50.977Z,1513257410.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:51.144Z,1513257411.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:51.543Z,1513257411.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:51.774Z,1513257411.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:51.943Z,1513257411.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:52.382Z,1513257412.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:52.569Z,1513257412.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:52.737Z,1513257412.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:52.973Z,1513257412.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:53.137Z,1513257413.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:53.578Z,1513257413.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:53.770Z,1513257413.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:53.947Z,1513257413.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:54.346Z,1513257414.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:54.567Z,1513257414.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:54.739Z,1513257414.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:54.973Z,1513257414.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:55.137Z,1513257415.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:55.535Z,1513257415.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:55.769Z,1513257415.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:55.939Z,1513257415.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:56.336Z,1513257416.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:56.567Z,1513257416.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:56.759Z,1513257416.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:56.975Z,1513257416.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:57.150Z,1513257417.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:57.566Z,1513257417.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:16:57.770Z,1513257417.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:58.565Z,1513257418.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:58.969Z,1513257418.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:16:59.766Z,1513257419.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:00.561Z,1513257420.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:00.965Z,1513257420.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:01.319Z,1513257421.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:01.427Z,1513257421.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:01.762Z,1513257421.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:01.822Z,1513257421.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:02.231Z,1513257422.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:02.563Z,1513257422.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:02.679Z,1513257422.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:02.982Z,1513257422.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:03.017Z,1513257423.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:03.549Z,1513257423.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:03.778Z,1513257423.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:03.819Z,1513257423.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:04.255Z,1513257424.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:04.575Z,1513257424.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:04.660Z,1513257424.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:04.981Z,1513257424.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:05.028Z,1513257425.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:05.486Z,1513257425.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:05.778Z,1513257425.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:05.819Z,1513257425.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:06.271Z,1513257426.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:06.577Z,1513257426.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:06.635Z,1513257426.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:06.982Z,1513257426.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:07.006Z,1513257427.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:07.412Z,1513257427.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:07.778Z,1513257427.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:07.820Z,1513257427.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:08.292Z,1513257428.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:08.573Z,1513257428.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:08.640Z,1513257428.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:08.980Z,1513257428.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:09.023Z,1513257429.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:09.422Z,1513257429.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:09.773Z,1513257429.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:09.831Z,1513257429.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:10.330Z,1513257430.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:10.609Z,1513257430.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:10.638Z,1513257430.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:11.013Z,1513257431.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:11.039Z,1513257431.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:11.423Z,1513257431.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:11.810Z,1513257431.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:11.867Z,1513257431.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:12.278Z,1513257432.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:12.605Z,1513257432.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:12.634Z,1513257432.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:13.009Z,1513257433.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:13.015Z,1513257433.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:13.412Z,1513257433.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:13.806Z,1513257433.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:13.828Z,1513257433.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:14.302Z,1513257434.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:14.601Z,1513257434.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:14.640Z,1513257434.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:15.005Z,1513257435.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:15.008Z,1513257435.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:15.407Z,1513257435.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:15.802Z,1513257435.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:15.809Z,1513257435.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:16.211Z,1513257436.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:16.598Z,1513257436.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:16.652Z,1513257436.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:17.001Z,1513257437.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:17.017Z,1513257437.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:17.424Z,1513257437.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:17.798Z,1513257437.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:17.815Z,1513257437.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:18.211Z,1513257438.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:18.594Z,1513257438.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:18.627Z,1513257438.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:18.997Z,1513257438.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:19.027Z,1513257439.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:19.407Z,1513257439.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:19.794Z,1513257439.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:19.875Z,1513257439.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:20.301Z,1513257440.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:20.592Z,1513257440.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:20.623Z,1513257440.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:20.997Z,1513257440.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:21.015Z,1513257441.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:21.410Z,1513257441.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:21.794Z,1513257441.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:21.815Z,1513257441.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:22.279Z,1513257442.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:22.589Z,1513257442.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:22.642Z,1513257442.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:22.993Z,1513257442.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:23.044Z,1513257443.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:23.431Z,1513257443.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:23.790Z,1513257443.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:23.879Z,1513257443.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:24.284Z,1513257444.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:24.585Z,1513257444.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:24.655Z,1513257444.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:24.989Z,1513257444.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:25.008Z,1513257445.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:25.443Z,1513257445.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:25.786Z,1513257445.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:25.832Z,1513257445.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:26.332Z,1513257446.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:26.585Z,1513257446.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:26.639Z,1513257446.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:26.989Z,1513257446.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:27.019Z,1513257447.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:27.415Z,1513257447.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:27.786Z,1513257447.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:27.819Z,1513257447.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:28.235Z,1513257448.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:28.581Z,1513257448.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:28.640Z,1513257448.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:28.985Z,1513257448.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:29.031Z,1513257449.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:29.427Z,1513257449.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:29.784Z,1513257449.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:29.842Z,1513257449.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:30.227Z,1513257450.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:30.577Z,1513257450.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:30.642Z,1513257450.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:30.981Z,1513257450.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:31.013Z,1513257451.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:31.419Z,1513257451.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:31.778Z,1513257451.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:31.822Z,1513257451.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:32.219Z,1513257452.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:32.574Z,1513257452.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:32.709Z,1513257452.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:32.977Z,1513257452.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:33.016Z,1513257453.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:33.412Z,1513257453.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:33.773Z,1513257453.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:33.857Z,1513257453.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:34.288Z,1513257454.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:34.569Z,1513257454.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:34.641Z,1513257454.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:34.973Z,1513257454.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:35.030Z,1513257455.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:35.431Z,1513257455.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:35.769Z,1513257455.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:35.839Z,1513257455.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:36.286Z,1513257456.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:36.565Z,1513257456.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:36.634Z,1513257456.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:36.969Z,1513257456.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:37.028Z,1513257457.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:37.431Z,1513257457.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:37.765Z,1513257457.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:37.836Z,1513257457.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:38.294Z,1513257458.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:38.561Z,1513257458.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:38.634Z,1513257458.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:38.965Z,1513257458.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:39.058Z,1513257459.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:39.421Z,1513257459.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:39.762Z,1513257459.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:39.820Z,1513257459.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:40.292Z,1513257460.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:40.576Z,1513257460.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:40.642Z,1513257460.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:40.981Z,1513257460.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:41.041Z,1513257461.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:41.416Z,1513257461.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:41.778Z,1513257461.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:41.831Z,1513257461.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:42.326Z,1513257462.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:42.594Z,1513257462.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:42.620Z,1513257462.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:42.997Z,1513257462.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:43.029Z,1513257463.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:43.426Z,1513257463.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:43.796Z,1513257463.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:43.834Z,1513257463.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:44.232Z,1513257464.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:44.590Z,1513257464.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:44.654Z,1513257464.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:44.994Z,1513257464.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:45.029Z,1513257465.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:45.429Z,1513257465.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:45.790Z,1513257465.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:45.882Z,1513257465.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:46.267Z,1513257466.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:46.585Z,1513257466.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:46.626Z,1513257466.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:47.051Z,1513257467.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:47.286Z,1513257467.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:47.417Z,1513257467.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:47.839Z,1513257467.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:48.081Z,1513257468.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:48.260Z,1513257468.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:48.620Z,1513257468.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:48.646Z,1513257468.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:49.022Z,1513257469.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:49.423Z,1513257469.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:49.442Z,1513257469.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:49.827Z,1513257469.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:50.238Z,1513257470.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:50.291Z,1513257470.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:50.617Z,1513257470.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:50.642Z,1513257470.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:51.014Z,1513257471.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:51.412Z,1513257471.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:51.438Z,1513257471.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:51.813Z,1513257471.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:52.234Z,1513257472.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:52.288Z,1513257472.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:52.624Z,1513257472.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:52.637Z,1513257472.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:53.047Z,1513257473.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:53.423Z,1513257473.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:53.434Z,1513257473.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:53.842Z,1513257473.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:54.231Z,1513257474.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:54.286Z,1513257474.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:54.632Z,1513257474.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:54.657Z,1513257474.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:55.006Z,1513257475.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:55.411Z,1513257475.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:55.454Z,1513257475.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:55.834Z,1513257475.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:56.250Z,1513257476.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:56.356Z,1513257476.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:56.621Z,1513257476.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:56.689Z,1513257476.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:57.011Z,1513257477.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:57.415Z,1513257477.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:57.485Z,1513257477.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:57.818Z,1513257477.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:17:58.281Z,1513257478.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:59.078Z,1513257479.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:17:59.602Z,1513257479.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:00.398Z,1513257480.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:00.965Z,1513257480.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:01.336Z,1513257481.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:01.479Z,1513257481.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:01.762Z,1513257481.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:01.855Z,1513257481.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:02.296Z,1513257482.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:02.557Z,1513257482.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:02.648Z,1513257482.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:02.961Z,1513257482.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:03.038Z,1513257483.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:03.451Z,1513257483.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:03.758Z,1513257483.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:03.859Z,1513257483.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:04.304Z,1513257484.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:04.553Z,1513257484.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:04.647Z,1513257484.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:04.957Z,1513257484.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:05.043Z,1513257485.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:05.443Z,1513257485.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:05.754Z,1513257485.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:05.887Z,1513257485.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:06.297Z,1513257486.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:06.550Z,1513257486.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:06.654Z,1513257486.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:06.953Z,1513257486.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:07.045Z,1513257487.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:07.444Z,1513257487.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:07.750Z,1513257487.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:07.842Z,1513257487.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:08.328Z,1513257488.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:08.545Z,1513257488.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:08.655Z,1513257488.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:08.949Z,1513257488.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:09.099Z,1513257489.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:09.454Z,1513257489.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:09.747Z,1513257489.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:09.867Z,1513257489.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:10.317Z,1513257490.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:10.542Z,1513257490.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:10.654Z,1513257490.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:10.948Z,1513257490.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:11.041Z,1513257491.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:11.438Z,1513257491.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:11.742Z,1513257491.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:11.862Z,1513257491.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:12.274Z,1513257492.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:12.539Z,1513257492.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:12.654Z,1513257492.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:12.957Z,1513257492.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:13.044Z,1513257493.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:13.447Z,1513257493.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:13.754Z,1513257493.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:13.838Z,1513257493.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:14.251Z,1513257494.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:14.554Z,1513257494.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:14.660Z,1513257494.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:14.961Z,1513257494.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:15.063Z,1513257495.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:15.514Z,1513257495.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:15.758Z,1513257495.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:15.846Z,1513257495.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:16.304Z,1513257496.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:16.553Z,1513257496.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:16.657Z,1513257496.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:16.957Z,1513257496.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:17.037Z,1513257497.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:17.471Z,1513257497.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:17.754Z,1513257497.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:17.861Z,1513257497.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:18.323Z,1513257498.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:18.553Z,1513257498.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:18.712Z,1513257498.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:18.957Z,1513257498.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:19.047Z,1513257499.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:19.454Z,1513257499.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:19.754Z,1513257499.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:19.867Z,1513257499.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:20.293Z,1513257500.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:20.550Z,1513257500.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:20.632Z,1513257500.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:21.040Z,1513257501.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:21.293Z,1513257501.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:21.447Z,1513257501.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:21.880Z,1513257501.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:22.089Z,1513257502.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:22.307Z,1513257502.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:22.650Z,1513257502.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:22.674Z,1513257502.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:23.063Z,1513257503.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:23.435Z,1513257503.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:23.445Z,1513257503.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:23.837Z,1513257503.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:24.245Z,1513257504.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:24.334Z,1513257504.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:24.651Z,1513257504.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:24.697Z,1513257504.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:25.076Z,1513257505.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:25.447Z,1513257505.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:25.494Z,1513257505.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:25.841Z,1513257505.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:26.244Z,1513257506.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:26.290Z,1513257506.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:26.661Z,1513257506.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:26.974Z,1513257506.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:27.051Z,1513257507.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:27.456Z,1513257507.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:27.769Z,1513257507.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:27.871Z,1513257507.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:28.271Z,1513257508.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:28.569Z,1513257508.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:28.682Z,1513257508.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:28.977Z,1513257508.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:29.050Z,1513257509.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:29.449Z,1513257509.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:29.773Z,1513257509.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:29.850Z,1513257509.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:30.355Z,1513257510.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:30.569Z,1513257510.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:30.652Z,1513257510.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:30.973Z,1513257510.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:31.045Z,1513257511.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:31.535Z,1513257511.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:31.770Z,1513257511.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:31.862Z,1513257511.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:32.320Z,1513257512.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:32.565Z,1513257512.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:32.639Z,1513257512.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:32.969Z,1513257512.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:33.047Z,1513257513.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:33.432Z,1513257513.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:33.765Z,1513257513.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:33.856Z,1513257513.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:34.303Z,1513257514.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:34.561Z,1513257514.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:34.679Z,1513257514.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:34.965Z,1513257514.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:35.053Z,1513257515.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:35.436Z,1513257515.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:35.762Z,1513257515.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:35.834Z,1513257515.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:36.284Z,1513257516.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:36.557Z,1513257516.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:36.662Z,1513257516.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:36.961Z,1513257516.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:37.061Z,1513257517.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:37.460Z,1513257517.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:37.758Z,1513257517.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:37.895Z,1513257517.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:38.319Z,1513257518.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:38.554Z,1513257518.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:38.645Z,1513257518.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:38.957Z,1513257518.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:39.042Z,1513257519.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:39.442Z,1513257519.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:39.756Z,1513257519.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:39.844Z,1513257519.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:40.243Z,1513257520.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:40.551Z,1513257520.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:40.691Z,1513257520.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:40.969Z,1513257520.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:41.075Z,1513257521.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:41.439Z,1513257521.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:41.766Z,1513257521.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:41.846Z,1513257521.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:42.248Z,1513257522.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:42.563Z,1513257522.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:42.664Z,1513257522.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:43.049Z,1513257523.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:43.057Z,1513257523.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:43.492Z,1513257523.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:43.846Z,1513257523.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:43.850Z,1513257523.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:44.339Z,1513257524.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:44.642Z,1513257524.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:44.648Z,1513257524.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:45.045Z,1513257525.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:45.048Z,1513257525.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:45.447Z,1513257525.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:45.842Z,1513257525.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:45.857Z,1513257525.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:46.289Z,1513257526.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:46.637Z,1513257526.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:46.654Z,1513257526.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:47.041Z,1513257527.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:47.048Z,1513257527.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:47.449Z,1513257527.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:47.838Z,1513257527.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:47.860Z,1513257527.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:48.306Z,1513257528.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:48.306Z,1513257528.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 255
2017-12-14T13:18:48.306Z,1513257528.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:18:48.308Z,1513257528.308 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:48.308Z,1513257528.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 255
2017-12-14T13:18:48.308Z,1513257528.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:18:48.319Z,1513257528.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:48.319Z,1513257528.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 255
2017-12-14T13:18:48.319Z,1513257528.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:18:48.349Z,1513257528.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:18:48.349Z,1513257528.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:18:48.350Z,1513257528.350 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:18:48.648Z,1513257528.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:48.675Z,1513257528.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:18:48.675Z,1513257528.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 255
2017-12-14T13:18:48.675Z,1513257528.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:18:48.675Z,1513257528.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 255
2017-12-14T13:18:48.676Z,1513257528.676 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:18:48.676Z,1513257528.676 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 255
2017-12-14T13:18:49.064Z,1513257529.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:18:49.064Z,1513257529.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:18:49.065Z,1513257529.065 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:18:49.065Z,1513257529.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:18:49.066Z,1513257529.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:18:49.066Z,1513257529.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:18:49.066Z,1513257529.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:18:49.067Z,1513257529.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:18:49.067Z,1513257529.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:18:49.440Z,1513257529.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:49.442Z,1513257529.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:49.839Z,1513257529.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:50.238Z,1513257530.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:50.307Z,1513257530.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:50.642Z,1513257530.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:50.680Z,1513257530.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:51.039Z,1513257531.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:51.438Z,1513257531.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:51.448Z,1513257531.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:51.855Z,1513257531.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:52.235Z,1513257532.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:52.360Z,1513257532.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:52.664Z,1513257532.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:52.693Z,1513257532.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:53.047Z,1513257533.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:53.452Z,1513257533.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:53.490Z,1513257533.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:53.938Z,1513257533.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:54.253Z,1513257534.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:54.285Z,1513257534.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:54.672Z,1513257534.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:54.966Z,1513257534.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:55.030Z,1513257535.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:55.467Z,1513257535.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:55.762Z,1513257535.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:55.867Z,1513257535.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:56.258Z,1513257536.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:56.560Z,1513257536.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:56.663Z,1513257536.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:56.969Z,1513257536.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:57.104Z,1513257537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:57.459Z,1513257537.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:57.766Z,1513257537.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:57.863Z,1513257537.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:18:58.562Z,1513257538.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:58.965Z,1513257538.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:18:59.762Z,1513257539.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:00.558Z,1513257540.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:00.961Z,1513257540.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:01.345Z,1513257541.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:01.470Z,1513257541.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:01.758Z,1513257541.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:01.848Z,1513257541.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:02.295Z,1513257542.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:02.553Z,1513257542.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:02.638Z,1513257542.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:02.957Z,1513257542.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:03.070Z,1513257543.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:03.439Z,1513257543.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:03.754Z,1513257543.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:03.867Z,1513257543.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:04.299Z,1513257544.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:04.550Z,1513257544.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:04.664Z,1513257544.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:04.953Z,1513257544.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:05.047Z,1513257545.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:05.445Z,1513257545.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:05.750Z,1513257545.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:05.847Z,1513257545.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:06.310Z,1513257546.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:06.545Z,1513257546.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:06.682Z,1513257546.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:06.949Z,1513257546.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:07.058Z,1513257547.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:07.460Z,1513257547.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:07.747Z,1513257547.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:07.840Z,1513257547.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:08.234Z,1513257548.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:08.543Z,1513257548.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:08.668Z,1513257548.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:08.969Z,1513257548.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:09.042Z,1513257549.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:09.469Z,1513257549.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:09.766Z,1513257549.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:09.887Z,1513257549.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:10.241Z,1513257550.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:10.563Z,1513257550.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:10.668Z,1513257550.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:10.973Z,1513257550.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:11.045Z,1513257551.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:11.444Z,1513257551.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:11.770Z,1513257551.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:11.848Z,1513257551.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:12.297Z,1513257552.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:12.565Z,1513257552.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:12.649Z,1513257552.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:12.969Z,1513257552.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:13.079Z,1513257553.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:13.461Z,1513257553.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:13.766Z,1513257553.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:13.863Z,1513257553.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:14.297Z,1513257554.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:14.561Z,1513257554.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:14.676Z,1513257554.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:14.965Z,1513257554.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:15.094Z,1513257555.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:15.448Z,1513257555.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:15.763Z,1513257555.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:15.883Z,1513257555.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:16.303Z,1513257556.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:16.557Z,1513257556.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:16.667Z,1513257556.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:16.961Z,1513257556.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:17.043Z,1513257557.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:17.058Z,1513257557.058 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:19:17.444Z,1513257557.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:17.757Z,1513257557.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:17.855Z,1513257557.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:18.300Z,1513257558.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:18.554Z,1513257558.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:18.650Z,1513257558.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:18.957Z,1513257558.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:19.046Z,1513257559.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:19.447Z,1513257559.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:19.754Z,1513257559.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:19.847Z,1513257559.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:20.335Z,1513257560.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:20.552Z,1513257560.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:20.665Z,1513257560.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:20.957Z,1513257560.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:21.066Z,1513257561.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:21.468Z,1513257561.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:21.754Z,1513257561.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:21.842Z,1513257561.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:22.247Z,1513257562.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:22.551Z,1513257562.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:22.692Z,1513257562.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:22.969Z,1513257562.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:23.040Z,1513257563.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:23.447Z,1513257563.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:23.765Z,1513257563.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:23.849Z,1513257563.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:24.250Z,1513257564.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:24.563Z,1513257564.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:24.707Z,1513257564.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:24.973Z,1513257564.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:25.054Z,1513257565.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:25.440Z,1513257565.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:25.770Z,1513257565.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:25.895Z,1513257565.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:26.286Z,1513257566.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:26.565Z,1513257566.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:26.671Z,1513257566.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:26.969Z,1513257566.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:27.071Z,1513257567.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:27.472Z,1513257567.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:27.765Z,1513257567.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:27.847Z,1513257567.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:28.290Z,1513257568.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:28.561Z,1513257568.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:28.648Z,1513257568.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:28.965Z,1513257568.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:29.078Z,1513257569.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:29.448Z,1513257569.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:29.763Z,1513257569.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:29.850Z,1513257569.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:30.294Z,1513257570.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:30.557Z,1513257570.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:30.647Z,1513257570.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:30.961Z,1513257570.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:31.040Z,1513257571.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:31.452Z,1513257571.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:31.760Z,1513257571.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:31.848Z,1513257571.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:32.333Z,1513257572.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:32.554Z,1513257572.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:32.651Z,1513257572.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:32.957Z,1513257572.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:33.047Z,1513257573.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:33.449Z,1513257573.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:33.754Z,1513257573.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:33.856Z,1513257573.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:34.311Z,1513257574.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:34.550Z,1513257574.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:34.677Z,1513257574.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:34.955Z,1513257574.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:35.042Z,1513257575.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:35.499Z,1513257575.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:35.750Z,1513257575.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:35.846Z,1513257575.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:36.290Z,1513257576.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:36.547Z,1513257576.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:36.687Z,1513257576.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:36.973Z,1513257576.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:37.058Z,1513257577.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:37.455Z,1513257577.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:37.770Z,1513257577.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:37.883Z,1513257577.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:38.256Z,1513257578.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:38.567Z,1513257578.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:38.711Z,1513257578.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:38.977Z,1513257578.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:39.039Z,1513257579.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:39.439Z,1513257579.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:39.773Z,1513257579.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:39.843Z,1513257579.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:40.298Z,1513257580.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:40.569Z,1513257580.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:40.660Z,1513257580.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:40.973Z,1513257580.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:41.049Z,1513257581.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:41.444Z,1513257581.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:41.770Z,1513257581.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:41.902Z,1513257581.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:42.292Z,1513257582.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:42.565Z,1513257582.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:42.647Z,1513257582.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:42.969Z,1513257582.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:43.043Z,1513257583.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:43.442Z,1513257583.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:43.766Z,1513257583.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:43.848Z,1513257583.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:44.299Z,1513257584.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:44.562Z,1513257584.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:44.653Z,1513257584.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:44.965Z,1513257584.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:45.090Z,1513257585.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:45.453Z,1513257585.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:45.761Z,1513257585.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:45.843Z,1513257585.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:46.297Z,1513257586.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:46.557Z,1513257586.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:46.660Z,1513257586.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:46.961Z,1513257586.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:47.106Z,1513257587.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:47.467Z,1513257587.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:47.757Z,1513257587.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:47.842Z,1513257587.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:48.349Z,1513257588.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:48.553Z,1513257588.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:48.645Z,1513257588.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:48.957Z,1513257588.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:49.044Z,1513257589.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:49.444Z,1513257589.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:49.754Z,1513257589.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:49.859Z,1513257589.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:50.257Z,1513257590.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:50.551Z,1513257590.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:50.654Z,1513257590.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:50.969Z,1513257590.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:51.046Z,1513257591.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:51.447Z,1513257591.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:51.766Z,1513257591.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:51.839Z,1513257591.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:52.236Z,1513257592.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:52.564Z,1513257592.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:52.667Z,1513257592.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:52.973Z,1513257592.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:53.002Z,1513257593.002 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T13:19:53.002Z,1513257593.002 [NAL9602] Data Fault, FailCount= 5
2017-12-14T13:19:53.002Z,1513257593.002 [NAL9602](ERROR): Data Fault
2017-12-14T13:19:53.064Z,1513257593.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:53.086Z,1513257593.086 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T13:19:53.087Z,1513257593.087 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T13:19:53.398Z,1513257593.398 [NAL9602](INFO): Powering down
2017-12-14T13:19:53.451Z,1513257593.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:53.475Z,1513257593.475 [CBIT](INFO): Critical error at 20171214T131953
2017-12-14T13:19:53.770Z,1513257593.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:53.863Z,1513257593.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:54.288Z,1513257594.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:54.565Z,1513257594.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:54.714Z,1513257594.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:54.969Z,1513257594.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:55.048Z,1513257595.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:55.449Z,1513257595.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:55.766Z,1513257595.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:55.828Z,1513257595.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:56.299Z,1513257596.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:56.562Z,1513257596.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:56.638Z,1513257596.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:56.965Z,1513257596.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:57.036Z,1513257597.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:57.434Z,1513257597.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:57.762Z,1513257597.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:57.840Z,1513257597.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:58.288Z,1513257598.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:19:58.557Z,1513257598.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:58.961Z,1513257598.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:19:59.758Z,1513257599.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:00.554Z,1513257600.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:00.957Z,1513257600.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:01.753Z,1513257601.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:01.814Z,1513257601.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:01.928Z,1513257601.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:02.399Z,1513257602.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:02.549Z,1513257602.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:02.696Z,1513257602.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:02.953Z,1513257602.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:03.123Z,1513257603.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:03.485Z,1513257603.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:03.749Z,1513257603.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:03.884Z,1513257603.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:04.307Z,1513257604.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:04.547Z,1513257604.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:04.699Z,1513257604.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:04.969Z,1513257604.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:05.088Z,1513257605.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:05.489Z,1513257605.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:05.766Z,1513257605.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:05.892Z,1513257605.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:06.291Z,1513257606.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:06.563Z,1513257606.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:06.683Z,1513257606.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:06.973Z,1513257606.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:07.085Z,1513257607.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:07.507Z,1513257607.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:07.770Z,1513257607.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:07.883Z,1513257607.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:08.296Z,1513257608.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:08.566Z,1513257608.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:08.697Z,1513257608.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:08.969Z,1513257608.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:09.089Z,1513257609.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:09.485Z,1513257609.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:09.766Z,1513257609.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:09.889Z,1513257609.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:10.298Z,1513257610.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:10.563Z,1513257610.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:10.696Z,1513257610.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:10.969Z,1513257610.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:11.095Z,1513257611.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:11.530Z,1513257611.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:11.766Z,1513257611.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:11.887Z,1513257611.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:12.302Z,1513257612.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:12.561Z,1513257612.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:12.692Z,1513257612.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:12.967Z,1513257612.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:13.086Z,1513257613.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:13.486Z,1513257613.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:13.762Z,1513257613.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:13.939Z,1513257613.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:14.291Z,1513257614.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:14.557Z,1513257614.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:14.693Z,1513257614.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:14.961Z,1513257614.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:15.091Z,1513257615.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:15.493Z,1513257615.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:15.757Z,1513257615.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:15.888Z,1513257615.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:16.344Z,1513257616.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:16.553Z,1513257616.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:16.699Z,1513257616.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:16.957Z,1513257616.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:17.166Z,1513257617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:17.495Z,1513257617.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:17.754Z,1513257617.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:17.896Z,1513257617.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:18.298Z,1513257618.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:18.551Z,1513257618.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:18.698Z,1513257618.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:18.961Z,1513257618.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:19.087Z,1513257619.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:19.502Z,1513257619.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:19.757Z,1513257619.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:19.899Z,1513257619.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:20.323Z,1513257620.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:20.555Z,1513257620.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:20.683Z,1513257620.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:20.966Z,1513257620.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:21.087Z,1513257621.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:21.491Z,1513257621.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:21.761Z,1513257621.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:21.883Z,1513257621.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:22.335Z,1513257622.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:22.557Z,1513257622.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:22.688Z,1513257622.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:22.961Z,1513257622.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:23.095Z,1513257623.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:23.654Z,1513257623.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:23.757Z,1513257623.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:23.890Z,1513257623.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:24.319Z,1513257624.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:24.556Z,1513257624.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:24.723Z,1513257624.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:24.961Z,1513257624.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:25.095Z,1513257625.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:25.517Z,1513257625.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:25.758Z,1513257625.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:25.886Z,1513257625.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:26.313Z,1513257626.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:26.555Z,1513257626.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:26.704Z,1513257626.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:26.957Z,1513257626.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:27.088Z,1513257627.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:27.535Z,1513257627.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:27.754Z,1513257627.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:27.895Z,1513257627.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:28.303Z,1513257628.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:28.549Z,1513257628.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:28.694Z,1513257628.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:28.953Z,1513257628.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:29.096Z,1513257629.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:29.492Z,1513257629.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:29.749Z,1513257629.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:29.921Z,1513257629.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:30.339Z,1513257630.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:30.547Z,1513257630.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:30.695Z,1513257630.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:30.953Z,1513257630.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:31.084Z,1513257631.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:31.492Z,1513257631.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:31.749Z,1513257631.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:31.890Z,1513257631.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:32.284Z,1513257632.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:32.547Z,1513257632.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:32.690Z,1513257632.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:32.961Z,1513257632.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:33.127Z,1513257633.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:33.491Z,1513257633.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:33.758Z,1513257633.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:33.912Z,1513257633.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:34.290Z,1513257634.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:34.555Z,1513257634.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:34.688Z,1513257634.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:34.961Z,1513257634.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:35.085Z,1513257635.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:35.488Z,1513257635.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:35.758Z,1513257635.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:35.891Z,1513257635.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:36.332Z,1513257636.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:36.553Z,1513257636.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:36.687Z,1513257636.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:36.957Z,1513257636.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:37.085Z,1513257637.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:37.488Z,1513257637.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:37.754Z,1513257637.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:37.888Z,1513257637.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:38.287Z,1513257638.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:38.550Z,1513257638.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:38.731Z,1513257638.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:38.953Z,1513257638.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:39.087Z,1513257639.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:39.544Z,1513257639.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:39.750Z,1513257639.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:39.892Z,1513257639.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:40.299Z,1513257640.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:40.545Z,1513257640.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:40.694Z,1513257640.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:40.949Z,1513257640.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:41.087Z,1513257641.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:41.491Z,1513257641.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:41.747Z,1513257641.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:41.885Z,1513257641.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:42.300Z,1513257642.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:42.541Z,1513257642.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:42.740Z,1513257642.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:42.945Z,1513257642.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:43.095Z,1513257643.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:43.492Z,1513257643.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:43.742Z,1513257643.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:43.937Z,1513257643.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:44.324Z,1513257644.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:44.537Z,1513257644.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:44.697Z,1513257644.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:45.084Z,1513257645.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:45.282Z,1513257645.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:45.484Z,1513257645.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:45.927Z,1513257645.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:46.077Z,1513257646.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:46.319Z,1513257646.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:46.680Z,1513257646.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:46.873Z,1513257646.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:47.120Z,1513257647.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:47.277Z,1513257647.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:47.487Z,1513257647.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:47.920Z,1513257647.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:48.073Z,1513257648.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:48.291Z,1513257648.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:48.686Z,1513257648.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:48.869Z,1513257648.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:49.139Z,1513257649.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:49.273Z,1513257649.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:49.487Z,1513257649.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:49.882Z,1513257649.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:50.069Z,1513257650.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:50.315Z,1513257650.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:50.625Z,1513257650.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:50.687Z,1513257650.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:51.088Z,1513257651.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:51.421Z,1513257651.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:51.485Z,1513257651.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:51.889Z,1513257651.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:52.223Z,1513257652.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:52.375Z,1513257652.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:52.633Z,1513257652.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:52.708Z,1513257652.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:53.086Z,1513257653.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:53.429Z,1513257653.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:53.485Z,1513257653.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:53.880Z,1513257653.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:54.227Z,1513257654.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:54.309Z,1513257654.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:54.652Z,1513257654.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:54.684Z,1513257654.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:55.082Z,1513257655.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:55.446Z,1513257655.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:55.522Z,1513257655.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:55.889Z,1513257655.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:56.241Z,1513257656.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:56.339Z,1513257656.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:56.645Z,1513257656.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:56.689Z,1513257656.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:56.693Z,1513257656.693 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:15:56.5Z
2017-12-14T13:20:56.693Z,1513257656.693 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:20:56.693Z,1513257656.693 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:20:57.092Z,1513257657.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:57.442Z,1513257657.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:57.859Z,1513257657.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:58.003Z,1513257658.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:20:58.239Z,1513257658.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:58.662Z,1513257658.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:20:59.457Z,1513257659.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:00.254Z,1513257660.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:00.969Z,1513257660.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:01.586Z,1513257661.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:01.653Z,1513257661.653 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Courier0296.lzma
2017-12-14T13:21:01.735Z,1513257661.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:01.765Z,1513257661.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:02.063Z,1513257662.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:02.416Z,1513257662.416 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0296.lzma.bak
2017-12-14T13:21:02.416Z,1513257662.416 [DataOverHttps](INFO): SBD MOMSN=5438775
2017-12-14T13:21:02.473Z,1513257662.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:02.563Z,1513257662.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:02.970Z,1513257662.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:03.623Z,1513257663.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:03.749Z,1513257663.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:03.766Z,1513257663.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:04.562Z,1513257664.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:04.966Z,1513257664.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:05.762Z,1513257665.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:06.558Z,1513257666.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:06.961Z,1513257666.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:07.279Z,1513257667.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:07.415Z,1513257667.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:07.758Z,1513257667.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:07.790Z,1513257667.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:08.329Z,1513257668.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:08.553Z,1513257668.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:08.599Z,1513257668.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:08.957Z,1513257668.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:09.030Z,1513257669.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:09.755Z,1513257669.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:10.550Z,1513257670.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:10.956Z,1513257670.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:11.749Z,1513257671.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:12.486Z,1513257672.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:12.545Z,1513257672.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:12.569Z,1513257672.569 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0297.lzma
2017-12-14T13:21:12.636Z,1513257672.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:12.950Z,1513257672.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:12.983Z,1513257672.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:13.323Z,1513257673.323 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0297.lzma.bak
2017-12-14T13:21:13.324Z,1513257673.324 [DataOverHttps](INFO): SBD MOMSN=5438780
2017-12-14T13:21:13.377Z,1513257673.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:13.747Z,1513257673.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:14.543Z,1513257674.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:14.556Z,1513257674.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:14.592Z,1513257674.592 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:21:14.592Z,1513257674.592 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:21:14.592Z,1513257674.592 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:21:14.725Z,1513257674.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:14.986Z,1513257674.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:15.781Z,1513257675.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:16.578Z,1513257676.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:16.981Z,1513257676.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:17.777Z,1513257677.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:18.251Z,1513257678.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:18.398Z,1513257678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:18.573Z,1513257678.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:18.734Z,1513257678.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:18.997Z,1513257678.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:19.134Z,1513257679.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:19.535Z,1513257679.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:19.794Z,1513257679.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:19.933Z,1513257679.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:20.350Z,1513257680.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:20.590Z,1513257680.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:20.807Z,1513257680.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:20.994Z,1513257680.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:21.125Z,1513257681.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:21.527Z,1513257681.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:21.790Z,1513257681.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:21.927Z,1513257681.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:22.388Z,1513257682.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:22.586Z,1513257682.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:22.796Z,1513257682.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:22.989Z,1513257682.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:23.125Z,1513257683.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:23.520Z,1513257683.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:23.785Z,1513257683.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:23.923Z,1513257683.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:24.322Z,1513257684.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:24.581Z,1513257684.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:24.733Z,1513257684.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:24.985Z,1513257684.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:25.127Z,1513257685.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:25.570Z,1513257685.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:25.782Z,1513257685.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:25.928Z,1513257685.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:26.373Z,1513257686.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:26.577Z,1513257686.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:26.713Z,1513257686.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:26.981Z,1513257686.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:27.114Z,1513257687.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:27.513Z,1513257687.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:27.778Z,1513257687.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:27.915Z,1513257687.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:28.316Z,1513257688.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:28.574Z,1513257688.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:28.719Z,1513257688.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:28.977Z,1513257688.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:29.143Z,1513257689.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:29.514Z,1513257689.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:29.774Z,1513257689.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:29.915Z,1513257689.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:30.313Z,1513257690.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:30.570Z,1513257690.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:30.719Z,1513257690.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:30.973Z,1513257690.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:31.116Z,1513257691.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:31.543Z,1513257691.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:31.770Z,1513257691.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:31.986Z,1513257691.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:32.342Z,1513257692.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:32.565Z,1513257692.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:32.723Z,1513257692.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:32.969Z,1513257692.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:33.186Z,1513257693.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:33.523Z,1513257693.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:33.766Z,1513257693.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:33.952Z,1513257693.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:34.331Z,1513257694.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:34.562Z,1513257694.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:34.821Z,1513257694.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:34.965Z,1513257694.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:35.123Z,1513257695.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:35.526Z,1513257695.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:35.761Z,1513257695.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:35.930Z,1513257695.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:36.322Z,1513257696.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:36.558Z,1513257696.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:36.728Z,1513257696.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:36.961Z,1513257696.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:37.124Z,1513257697.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:37.527Z,1513257697.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:37.760Z,1513257697.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:37.924Z,1513257697.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:38.392Z,1513257698.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:38.554Z,1513257698.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:38.732Z,1513257698.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:38.957Z,1513257698.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:39.137Z,1513257699.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:39.536Z,1513257699.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:39.754Z,1513257699.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:39.932Z,1513257699.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:40.417Z,1513257700.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:40.549Z,1513257700.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:40.734Z,1513257700.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:40.953Z,1513257700.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:41.152Z,1513257701.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:41.546Z,1513257701.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:41.749Z,1513257701.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:41.923Z,1513257701.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:42.343Z,1513257702.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:42.548Z,1513257702.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:42.724Z,1513257702.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:42.961Z,1513257702.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:43.208Z,1513257703.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:43.526Z,1513257703.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:43.758Z,1513257703.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:43.920Z,1513257703.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:44.323Z,1513257704.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:44.555Z,1513257704.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:44.739Z,1513257704.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:44.965Z,1513257704.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:45.143Z,1513257705.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:45.519Z,1513257705.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:45.762Z,1513257705.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:45.966Z,1513257705.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:46.314Z,1513257706.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:46.557Z,1513257706.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:46.860Z,1513257706.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:46.962Z,1513257706.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:47.115Z,1513257707.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:47.589Z,1513257707.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:47.758Z,1513257707.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:47.915Z,1513257707.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:48.314Z,1513257708.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:48.553Z,1513257708.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:48.848Z,1513257708.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:48.957Z,1513257708.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:49.159Z,1513257709.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:49.159Z,1513257709.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 256
2017-12-14T13:21:49.159Z,1513257709.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:21:49.173Z,1513257709.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:49.173Z,1513257709.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 256
2017-12-14T13:21:49.173Z,1513257709.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:21:49.175Z,1513257709.175 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:49.175Z,1513257709.175 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 256
2017-12-14T13:21:49.176Z,1513257709.176 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:21:49.259Z,1513257709.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:21:49.259Z,1513257709.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:21:49.259Z,1513257709.259 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:21:49.565Z,1513257709.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:21:49.565Z,1513257709.565 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 256
2017-12-14T13:21:49.566Z,1513257709.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:21:49.566Z,1513257709.566 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 256
2017-12-14T13:21:49.566Z,1513257709.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:21:49.566Z,1513257709.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 256
2017-12-14T13:21:49.754Z,1513257709.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:49.943Z,1513257709.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:21:49.943Z,1513257709.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:21:49.944Z,1513257709.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:21:49.944Z,1513257709.944 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:21:49.965Z,1513257709.965 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:21:49.966Z,1513257709.966 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:21:49.966Z,1513257709.966 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:21:49.967Z,1513257709.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:21:49.967Z,1513257709.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:21:50.350Z,1513257710.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:50.550Z,1513257710.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:50.792Z,1513257710.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:50.954Z,1513257710.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:51.163Z,1513257711.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:51.548Z,1513257711.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:51.750Z,1513257711.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:51.960Z,1513257711.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:52.320Z,1513257712.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:52.545Z,1513257712.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:52.752Z,1513257712.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:52.949Z,1513257712.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:53.128Z,1513257713.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:53.194Z,1513257713.194 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T13:21:53.194Z,1513257713.194 [NAL9602] No Fault, FailCount= 5
2017-12-14T13:21:53.502Z,1513257713.502 [NAL9602](INFO): Powering up NAL9602
2017-12-14T13:21:53.561Z,1513257713.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:53.749Z,1513257713.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:53.978Z,1513257713.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:54.402Z,1513257714.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:54.546Z,1513257714.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:54.724Z,1513257714.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:54.950Z,1513257714.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:55.158Z,1513257715.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:55.582Z,1513257715.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:55.746Z,1513257715.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:55.952Z,1513257715.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:56.384Z,1513257716.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:56.543Z,1513257716.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:56.743Z,1513257716.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:56.981Z,1513257716.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:57.151Z,1513257717.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:57.536Z,1513257717.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:57.778Z,1513257717.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:57.935Z,1513257717.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:58.370Z,1513257718.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:58.574Z,1513257718.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:58.733Z,1513257718.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:58.981Z,1513257718.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:59.140Z,1513257719.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:59.557Z,1513257719.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:21:59.778Z,1513257719.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:21:59.949Z,1513257719.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:00.323Z,1513257720.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:00.574Z,1513257720.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:00.761Z,1513257720.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:00.978Z,1513257720.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:01.135Z,1513257721.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:01.532Z,1513257721.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:01.774Z,1513257721.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:01.974Z,1513257721.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:02.335Z,1513257722.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:02.570Z,1513257722.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:02.766Z,1513257722.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:02.974Z,1513257722.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:03.166Z,1513257723.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:03.566Z,1513257723.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:03.770Z,1513257723.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:03.959Z,1513257723.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:04.370Z,1513257724.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:04.566Z,1513257724.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:04.682Z,1513257724.682 [NAL9602](INFO): NAL9602 initialized
2017-12-14T13:22:04.763Z,1513257724.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:04.970Z,1513257724.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:05.128Z,1513257725.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:05.572Z,1513257725.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:05.766Z,1513257725.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:05.943Z,1513257725.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:06.339Z,1513257726.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:06.562Z,1513257726.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:06.726Z,1513257726.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:06.981Z,1513257726.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:07.177Z,1513257727.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:07.543Z,1513257727.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:07.778Z,1513257727.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:07.981Z,1513257727.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:08.372Z,1513257728.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:08.574Z,1513257728.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:08.762Z,1513257728.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:08.977Z,1513257728.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:09.122Z,1513257729.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:09.564Z,1513257729.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:09.774Z,1513257729.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:09.932Z,1513257729.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:10.370Z,1513257730.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:10.570Z,1513257730.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:10.734Z,1513257730.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:10.986Z,1513257730.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:11.143Z,1513257731.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:11.574Z,1513257731.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:11.782Z,1513257731.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:11.951Z,1513257731.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:12.339Z,1513257732.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:12.578Z,1513257732.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:12.740Z,1513257732.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:12.982Z,1513257732.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:13.161Z,1513257733.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:13.527Z,1513257733.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:13.778Z,1513257733.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:13.964Z,1513257733.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:14.375Z,1513257734.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:14.574Z,1513257734.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:14.733Z,1513257734.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:14.977Z,1513257734.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:15.131Z,1513257735.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:15.774Z,1513257735.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:16.569Z,1513257736.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:16.973Z,1513257736.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:17.769Z,1513257737.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:18.565Z,1513257738.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:18.679Z,1513257738.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:18.815Z,1513257738.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:18.969Z,1513257738.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:19.214Z,1513257739.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:19.592Z,1513257739.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:19.765Z,1513257739.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:20.039Z,1513257740.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:20.395Z,1513257740.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:20.561Z,1513257740.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:20.774Z,1513257740.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:20.965Z,1513257740.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:21.180Z,1513257741.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:21.585Z,1513257741.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:21.761Z,1513257741.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:21.982Z,1513257741.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:22.391Z,1513257742.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:22.558Z,1513257742.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:22.787Z,1513257742.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:22.961Z,1513257742.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:23.175Z,1513257743.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:23.580Z,1513257743.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:23.757Z,1513257743.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:23.980Z,1513257743.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:24.383Z,1513257744.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:24.555Z,1513257744.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:24.783Z,1513257744.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:24.961Z,1513257744.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:25.195Z,1513257745.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:25.585Z,1513257745.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:25.758Z,1513257745.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:25.986Z,1513257745.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:26.378Z,1513257746.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:26.560Z,1513257746.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:26.789Z,1513257746.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:27.168Z,1513257747.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:27.353Z,1513257747.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:27.572Z,1513257747.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:27.757Z,1513257747.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:27.968Z,1513257747.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:28.399Z,1513257748.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:28.553Z,1513257748.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:28.768Z,1513257748.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:28.957Z,1513257748.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:29.198Z,1513257749.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:29.604Z,1513257749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:29.754Z,1513257749.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:30.014Z,1513257750.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:30.370Z,1513257750.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:30.549Z,1513257750.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:30.778Z,1513257750.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:30.953Z,1513257750.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:31.178Z,1513257751.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:31.580Z,1513257751.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:31.750Z,1513257751.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:31.981Z,1513257751.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:32.369Z,1513257752.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:32.545Z,1513257752.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:32.778Z,1513257752.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:32.949Z,1513257752.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:33.211Z,1513257753.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:33.587Z,1513257753.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:33.749Z,1513257753.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:33.984Z,1513257753.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:34.371Z,1513257754.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:34.545Z,1513257754.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:34.778Z,1513257754.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:34.949Z,1513257754.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:35.191Z,1513257755.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:35.591Z,1513257755.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:35.746Z,1513257755.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:35.987Z,1513257755.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:36.394Z,1513257756.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:36.542Z,1513257756.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:36.777Z,1513257756.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:36.946Z,1513257756.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:37.187Z,1513257757.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:37.591Z,1513257757.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:37.742Z,1513257757.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:37.987Z,1513257757.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:38.379Z,1513257758.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:38.541Z,1513257758.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:38.764Z,1513257758.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:38.981Z,1513257758.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:39.203Z,1513257759.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:39.601Z,1513257759.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:39.778Z,1513257759.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:39.980Z,1513257759.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:40.365Z,1513257760.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:40.574Z,1513257760.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:40.812Z,1513257760.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:40.977Z,1513257760.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:41.212Z,1513257761.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:41.619Z,1513257761.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:41.774Z,1513257761.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:41.977Z,1513257761.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:42.409Z,1513257762.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:42.570Z,1513257762.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:42.788Z,1513257762.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:42.973Z,1513257762.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:43.225Z,1513257763.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:43.580Z,1513257763.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:43.769Z,1513257763.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:43.985Z,1513257763.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:44.381Z,1513257764.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:44.565Z,1513257764.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:44.779Z,1513257764.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:44.969Z,1513257764.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:45.187Z,1513257765.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:45.588Z,1513257765.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:45.766Z,1513257765.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:45.994Z,1513257765.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:46.363Z,1513257766.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:46.561Z,1513257766.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:46.815Z,1513257766.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:46.965Z,1513257766.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:47.173Z,1513257767.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:47.572Z,1513257767.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:47.761Z,1513257767.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:47.985Z,1513257767.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:48.380Z,1513257768.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:48.558Z,1513257768.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:48.780Z,1513257768.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:48.961Z,1513257768.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:49.215Z,1513257769.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:49.584Z,1513257769.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:49.757Z,1513257769.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:49.977Z,1513257769.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:50.369Z,1513257770.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:50.553Z,1513257770.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:50.801Z,1513257770.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:50.957Z,1513257770.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:51.212Z,1513257771.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:51.581Z,1513257771.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:51.754Z,1513257771.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:51.988Z,1513257771.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:52.418Z,1513257772.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:52.551Z,1513257772.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:52.786Z,1513257772.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:52.981Z,1513257772.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:53.191Z,1513257773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:53.582Z,1513257773.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:53.778Z,1513257773.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:53.984Z,1513257773.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:54.378Z,1513257774.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:54.574Z,1513257774.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:54.783Z,1513257774.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:54.977Z,1513257774.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:55.180Z,1513257775.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:55.588Z,1513257775.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:55.774Z,1513257775.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:56.014Z,1513257776.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:56.390Z,1513257776.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:56.570Z,1513257776.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:56.782Z,1513257776.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:56.975Z,1513257776.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:57.192Z,1513257777.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:57.588Z,1513257777.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:57.769Z,1513257777.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:57.995Z,1513257777.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:58.370Z,1513257778.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:58.565Z,1513257778.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:58.772Z,1513257778.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:58.969Z,1513257778.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:22:59.195Z,1513257779.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:59.585Z,1513257779.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:22:59.765Z,1513257779.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:00.078Z,1513257780.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:00.371Z,1513257780.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:00.561Z,1513257780.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:00.771Z,1513257780.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:00.965Z,1513257780.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:01.189Z,1513257781.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:01.587Z,1513257781.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:01.762Z,1513257781.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:01.976Z,1513257781.976 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T13:23:01.976Z,1513257781.976 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:23:01.976Z,1513257781.976 [BPC1](ERROR): Data Fault
2017-12-14T13:23:01.984Z,1513257781.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:02.018Z,1513257782.018 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:23:02.392Z,1513257782.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:02.557Z,1513257782.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:02.778Z,1513257782.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:02.961Z,1513257782.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:03.181Z,1513257783.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:03.196Z,1513257783.196 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:23:03.196Z,1513257783.196 [BPC1] No Fault, FailCount= 1
2017-12-14T13:23:03.628Z,1513257783.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:03.760Z,1513257783.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:03.987Z,1513257783.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:04.382Z,1513257784.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:04.553Z,1513257784.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:04.779Z,1513257784.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:04.957Z,1513257784.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:05.184Z,1513257785.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:05.582Z,1513257785.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:05.754Z,1513257785.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:05.979Z,1513257785.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:06.376Z,1513257786.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:06.551Z,1513257786.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:06.779Z,1513257786.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:06.961Z,1513257786.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:07.283Z,1513257787.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:07.585Z,1513257787.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:07.758Z,1513257787.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:07.980Z,1513257787.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:08.364Z,1513257788.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:08.555Z,1513257788.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:08.768Z,1513257788.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:08.981Z,1513257788.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:09.192Z,1513257789.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:09.598Z,1513257789.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:09.781Z,1513257789.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:09.995Z,1513257789.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:10.369Z,1513257790.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:10.579Z,1513257790.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:10.775Z,1513257790.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:10.985Z,1513257790.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:11.179Z,1513257791.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:11.576Z,1513257791.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:11.782Z,1513257791.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:11.996Z,1513257791.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:12.371Z,1513257792.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:12.577Z,1513257792.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:12.769Z,1513257792.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:12.981Z,1513257792.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:13.183Z,1513257793.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:13.575Z,1513257793.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:13.778Z,1513257793.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:13.987Z,1513257793.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:14.367Z,1513257794.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:14.573Z,1513257794.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:14.803Z,1513257794.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:14.977Z,1513257794.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:15.179Z,1513257795.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:15.774Z,1513257795.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:16.570Z,1513257796.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:16.973Z,1513257796.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:17.770Z,1513257797.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:18.566Z,1513257798.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:18.815Z,1513257798.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:18.963Z,1513257798.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:18.970Z,1513257798.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:19.291Z,1513257799.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:19.693Z,1513257799.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:19.766Z,1513257799.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:20.084Z,1513257800.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:20.488Z,1513257800.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:20.563Z,1513257800.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:20.915Z,1513257800.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:20.981Z,1513257800.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:21.307Z,1513257801.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:21.698Z,1513257801.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:21.779Z,1513257801.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:22.100Z,1513257802.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:22.490Z,1513257802.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:22.574Z,1513257802.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:22.914Z,1513257802.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:22.981Z,1513257802.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:23.312Z,1513257803.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:23.743Z,1513257803.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:23.778Z,1513257803.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:24.144Z,1513257804.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:24.538Z,1513257804.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:24.586Z,1513257804.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:24.949Z,1513257804.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:24.989Z,1513257804.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:25.294Z,1513257805.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:25.707Z,1513257805.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:25.787Z,1513257805.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:26.093Z,1513257806.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:26.503Z,1513257806.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:26.582Z,1513257806.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:26.911Z,1513257806.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:26.985Z,1513257806.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:27.300Z,1513257807.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:27.722Z,1513257807.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:27.782Z,1513257807.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:28.070Z,1513257808.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:28.491Z,1513257808.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:28.577Z,1513257808.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:28.883Z,1513257808.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:28.982Z,1513257808.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:29.306Z,1513257809.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:29.715Z,1513257809.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:29.778Z,1513257809.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:30.107Z,1513257810.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:30.485Z,1513257810.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:30.573Z,1513257810.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:30.934Z,1513257810.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:30.978Z,1513257810.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:31.286Z,1513257811.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:31.688Z,1513257811.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:31.773Z,1513257811.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:32.085Z,1513257812.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:32.495Z,1513257812.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:32.570Z,1513257812.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:32.899Z,1513257812.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:32.973Z,1513257812.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:33.328Z,1513257813.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:33.687Z,1513257813.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:33.769Z,1513257813.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:34.169Z,1513257814.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:34.499Z,1513257814.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:34.567Z,1513257814.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:34.889Z,1513257814.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:34.986Z,1513257814.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:35.311Z,1513257815.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:35.704Z,1513257815.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:35.783Z,1513257815.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:36.104Z,1513257816.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:36.506Z,1513257816.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:36.578Z,1513257816.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:36.907Z,1513257816.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:36.981Z,1513257816.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:37.331Z,1513257817.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:37.704Z,1513257817.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:37.777Z,1513257817.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:38.107Z,1513257818.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:38.509Z,1513257818.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:38.573Z,1513257818.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:38.920Z,1513257818.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:38.977Z,1513257818.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:39.310Z,1513257819.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:39.692Z,1513257819.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:39.773Z,1513257819.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:40.082Z,1513257820.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:40.562Z,1513257820.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:40.570Z,1513257820.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:40.961Z,1513257820.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:40.973Z,1513257820.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:41.292Z,1513257821.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:41.692Z,1513257821.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:41.770Z,1513257821.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:42.109Z,1513257822.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:42.507Z,1513257822.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:42.565Z,1513257822.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:42.899Z,1513257822.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:42.969Z,1513257822.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:43.302Z,1513257823.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:43.756Z,1513257823.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:43.766Z,1513257823.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:44.103Z,1513257824.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:44.495Z,1513257824.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:44.561Z,1513257824.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:44.892Z,1513257824.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:44.965Z,1513257824.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:45.286Z,1513257825.286 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T13:23:45.286Z,1513257825.286 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:23:45.286Z,1513257825.286 [BPC1](ERROR): Data Fault
2017-12-14T13:23:45.294Z,1513257825.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:45.324Z,1513257825.324 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:23:45.693Z,1513257825.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:45.762Z,1513257825.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:46.095Z,1513257826.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:46.488Z,1513257826.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:46.502Z,1513257826.502 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:23:46.502Z,1513257826.502 [BPC1] No Fault, FailCount= 1
2017-12-14T13:23:46.557Z,1513257826.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:46.962Z,1513257826.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:47.023Z,1513257827.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:47.296Z,1513257827.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:47.766Z,1513257827.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:47.776Z,1513257827.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:48.127Z,1513257828.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:48.493Z,1513257828.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:48.563Z,1513257828.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:48.890Z,1513257828.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:48.977Z,1513257828.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:49.301Z,1513257829.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:49.701Z,1513257829.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:49.773Z,1513257829.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:50.139Z,1513257830.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:50.505Z,1513257830.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:50.571Z,1513257830.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:50.899Z,1513257830.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:50.977Z,1513257830.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:51.303Z,1513257831.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:51.688Z,1513257831.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:51.774Z,1513257831.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:52.098Z,1513257832.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:52.485Z,1513257832.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:52.569Z,1513257832.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:52.888Z,1513257832.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:52.973Z,1513257832.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:53.367Z,1513257833.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:53.714Z,1513257833.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:53.771Z,1513257833.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:54.109Z,1513257834.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:54.484Z,1513257834.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:54.565Z,1513257834.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:54.884Z,1513257834.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:54.969Z,1513257834.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:55.327Z,1513257835.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:55.686Z,1513257835.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:55.765Z,1513257835.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:56.088Z,1513257836.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:56.537Z,1513257836.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:56.562Z,1513257836.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:56.945Z,1513257836.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:56.965Z,1513257836.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:57.296Z,1513257837.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:57.691Z,1513257837.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:57.762Z,1513257837.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:58.099Z,1513257838.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:58.499Z,1513257838.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:58.557Z,1513257838.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:58.896Z,1513257838.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:58.962Z,1513257838.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:23:59.304Z,1513257839.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:59.743Z,1513257839.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:23:59.758Z,1513257839.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:00.152Z,1513257840.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:00.493Z,1513257840.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:00.553Z,1513257840.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:00.886Z,1513257840.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:00.957Z,1513257840.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:01.303Z,1513257841.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:01.682Z,1513257841.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:01.753Z,1513257841.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:02.107Z,1513257842.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:02.550Z,1513257842.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:02.572Z,1513257842.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:02.940Z,1513257842.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:02.985Z,1513257842.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:03.312Z,1513257843.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:03.686Z,1513257843.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:03.782Z,1513257843.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:04.084Z,1513257844.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:04.491Z,1513257844.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:04.578Z,1513257844.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:04.899Z,1513257844.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:04.981Z,1513257844.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:05.297Z,1513257845.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:05.703Z,1513257845.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:05.778Z,1513257845.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:06.130Z,1513257846.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:06.486Z,1513257846.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:06.574Z,1513257846.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:06.945Z,1513257846.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:06.977Z,1513257846.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:07.288Z,1513257847.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:07.688Z,1513257847.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:07.774Z,1513257847.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:08.126Z,1513257848.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:08.504Z,1513257848.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:08.569Z,1513257848.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:08.950Z,1513257848.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:08.973Z,1513257848.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:09.301Z,1513257849.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:09.699Z,1513257849.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:09.770Z,1513257849.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:10.094Z,1513257850.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:10.495Z,1513257850.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:10.565Z,1513257850.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:10.902Z,1513257850.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:10.969Z,1513257850.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:11.303Z,1513257851.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:11.704Z,1513257851.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:11.766Z,1513257851.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:12.103Z,1513257852.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:12.522Z,1513257852.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:12.561Z,1513257852.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:12.896Z,1513257852.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:12.965Z,1513257852.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:13.293Z,1513257853.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:13.686Z,1513257853.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:13.761Z,1513257853.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:14.075Z,1513257854.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:14.515Z,1513257854.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:14.558Z,1513257854.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:14.912Z,1513257854.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:14.961Z,1513257854.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:15.304Z,1513257855.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:15.758Z,1513257855.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:16.555Z,1513257856.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:16.977Z,1513257856.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:17.773Z,1513257857.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:18.571Z,1513257858.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:18.824Z,1513257858.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:18.977Z,1513257858.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:18.992Z,1513257858.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:19.335Z,1513257859.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:19.717Z,1513257859.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:19.774Z,1513257859.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:20.113Z,1513257860.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:20.503Z,1513257860.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:20.569Z,1513257860.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:20.894Z,1513257860.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:20.973Z,1513257860.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:21.294Z,1513257861.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:21.693Z,1513257861.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:21.770Z,1513257861.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:22.117Z,1513257862.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:22.508Z,1513257862.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:22.566Z,1513257862.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:22.912Z,1513257862.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:22.969Z,1513257862.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:23.310Z,1513257863.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:23.679Z,1513257863.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:23.766Z,1513257863.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:24.111Z,1513257864.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:24.496Z,1513257864.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:24.561Z,1513257864.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:24.926Z,1513257864.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:24.965Z,1513257864.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:25.300Z,1513257865.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:25.731Z,1513257865.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:25.762Z,1513257865.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:26.100Z,1513257866.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:26.507Z,1513257866.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:26.558Z,1513257866.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:26.903Z,1513257866.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:26.961Z,1513257866.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:27.297Z,1513257867.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:27.697Z,1513257867.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:27.758Z,1513257867.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:28.107Z,1513257868.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:28.548Z,1513257868.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:28.554Z,1513257868.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:28.931Z,1513257868.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:28.958Z,1513257868.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:29.361Z,1513257869.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:29.706Z,1513257869.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:29.754Z,1513257869.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:30.108Z,1513257870.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:30.507Z,1513257870.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:30.560Z,1513257870.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:30.925Z,1513257870.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:30.981Z,1513257870.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:31.328Z,1513257871.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:31.778Z,1513257871.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:31.794Z,1513257871.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:32.119Z,1513257872.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:32.574Z,1513257872.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:32.590Z,1513257872.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:32.897Z,1513257872.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:32.989Z,1513257872.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:33.300Z,1513257873.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:33.702Z,1513257873.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:33.786Z,1513257873.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:34.096Z,1513257874.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:34.504Z,1513257874.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:34.581Z,1513257874.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:34.943Z,1513257874.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:34.986Z,1513257874.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:35.358Z,1513257875.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:35.688Z,1513257875.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:35.782Z,1513257875.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:36.094Z,1513257876.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:36.499Z,1513257876.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:36.577Z,1513257876.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:36.942Z,1513257876.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:36.981Z,1513257876.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:37.296Z,1513257877.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:37.767Z,1513257877.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:37.778Z,1513257877.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:38.139Z,1513257878.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:38.499Z,1513257878.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:38.573Z,1513257878.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:38.899Z,1513257878.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:38.977Z,1513257878.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:39.293Z,1513257879.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:39.701Z,1513257879.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:39.774Z,1513257879.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:40.097Z,1513257880.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:40.508Z,1513257880.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:40.569Z,1513257880.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:40.947Z,1513257880.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:40.985Z,1513257880.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:41.318Z,1513257881.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:41.723Z,1513257881.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:41.782Z,1513257881.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:42.105Z,1513257882.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:42.507Z,1513257882.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:42.577Z,1513257882.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:42.911Z,1513257882.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:42.981Z,1513257882.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:43.307Z,1513257883.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:43.709Z,1513257883.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:43.778Z,1513257883.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:44.108Z,1513257884.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:44.517Z,1513257884.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:44.573Z,1513257884.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:44.931Z,1513257884.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:44.981Z,1513257884.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:45.292Z,1513257885.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:45.692Z,1513257885.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:45.777Z,1513257885.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:46.100Z,1513257886.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:46.496Z,1513257886.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:46.574Z,1513257886.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:46.955Z,1513257886.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:46.981Z,1513257886.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:47.303Z,1513257887.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:47.694Z,1513257887.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:47.778Z,1513257887.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:48.136Z,1513257888.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:48.499Z,1513257888.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:48.573Z,1513257888.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:48.899Z,1513257888.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:48.977Z,1513257888.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:49.333Z,1513257889.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:49.715Z,1513257889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:49.774Z,1513257889.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:50.115Z,1513257890.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:50.115Z,1513257890.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 257
2017-12-14T13:24:50.115Z,1513257890.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:24:50.135Z,1513257890.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:50.135Z,1513257890.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 257
2017-12-14T13:24:50.135Z,1513257890.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:24:50.141Z,1513257890.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:50.142Z,1513257890.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 257
2017-12-14T13:24:50.142Z,1513257890.142 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:24:50.212Z,1513257890.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:24:50.212Z,1513257890.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:24:50.223Z,1513257890.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:24:50.519Z,1513257890.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:24:50.519Z,1513257890.519 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 257
2017-12-14T13:24:50.520Z,1513257890.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:24:50.521Z,1513257890.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 257
2017-12-14T13:24:50.522Z,1513257890.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:24:50.523Z,1513257890.523 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 257
2017-12-14T13:24:50.569Z,1513257890.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:50.886Z,1513257890.886 [BPC1](ERROR): Failed to parse message.
2017-12-14T13:24:50.886Z,1513257890.886 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T13:24:50.886Z,1513257890.886 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:24:50.886Z,1513257890.886 [BPC1](ERROR): Data Fault
2017-12-14T13:24:50.913Z,1513257890.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:24:50.914Z,1513257890.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:24:50.915Z,1513257890.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:24:50.916Z,1513257890.916 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:24:50.916Z,1513257890.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:24:50.921Z,1513257890.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:24:50.921Z,1513257890.921 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:24:50.922Z,1513257890.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:24:50.922Z,1513257890.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:24:50.946Z,1513257890.946 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:24:50.973Z,1513257890.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:51.311Z,1513257891.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:51.705Z,1513257891.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:51.769Z,1513257891.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:52.108Z,1513257892.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:52.128Z,1513257892.128 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:24:52.128Z,1513257892.128 [BPC1] No Fault, FailCount= 1
2017-12-14T13:24:52.563Z,1513257892.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:52.566Z,1513257892.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:52.908Z,1513257892.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:52.969Z,1513257892.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:53.324Z,1513257893.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:53.679Z,1513257893.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:53.766Z,1513257893.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:54.161Z,1513257894.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:54.562Z,1513257894.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:54.573Z,1513257894.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:54.891Z,1513257894.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:54.965Z,1513257894.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:55.326Z,1513257895.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:55.724Z,1513257895.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:55.762Z,1513257895.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:56.117Z,1513257896.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:56.495Z,1513257896.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:56.557Z,1513257896.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:56.924Z,1513257896.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:56.961Z,1513257896.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:57.299Z,1513257897.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:57.756Z,1513257897.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:57.770Z,1513257897.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:58.095Z,1513257898.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:58.503Z,1513257898.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:58.567Z,1513257898.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:58.923Z,1513257898.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:58.993Z,1513257898.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:24:59.312Z,1513257899.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:59.702Z,1513257899.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:24:59.790Z,1513257899.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:00.103Z,1513257900.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:00.503Z,1513257900.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:00.585Z,1513257900.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:00.955Z,1513257900.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:00.990Z,1513257900.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:01.322Z,1513257901.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:01.719Z,1513257901.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:01.785Z,1513257901.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:02.120Z,1513257902.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:02.495Z,1513257902.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:02.581Z,1513257902.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:02.915Z,1513257902.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:02.985Z,1513257902.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:03.292Z,1513257903.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:03.692Z,1513257903.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:03.781Z,1513257903.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:04.131Z,1513257904.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:04.510Z,1513257904.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:04.581Z,1513257904.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:04.960Z,1513257904.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:04.985Z,1513257904.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:05.334Z,1513257905.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:05.705Z,1513257905.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:05.782Z,1513257905.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:06.092Z,1513257906.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:06.497Z,1513257906.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:06.577Z,1513257906.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:06.912Z,1513257906.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:06.981Z,1513257906.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:07.300Z,1513257907.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:07.715Z,1513257907.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:07.778Z,1513257907.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:08.105Z,1513257908.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:08.500Z,1513257908.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:08.573Z,1513257908.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:08.906Z,1513257908.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:08.977Z,1513257908.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:09.298Z,1513257909.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:09.707Z,1513257909.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:09.774Z,1513257909.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:10.103Z,1513257910.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:10.581Z,1513257910.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:10.593Z,1513257910.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:10.913Z,1513257910.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:10.985Z,1513257910.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:11.305Z,1513257911.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:11.699Z,1513257911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:11.782Z,1513257911.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:12.123Z,1513257912.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:12.530Z,1513257912.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:12.577Z,1513257912.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:12.931Z,1513257912.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:13.324Z,1513257913.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:13.374Z,1513257913.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:13.766Z,1513257913.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:13.778Z,1513257913.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:14.151Z,1513257914.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:14.495Z,1513257914.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:14.573Z,1513257914.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:14.926Z,1513257914.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:14.982Z,1513257914.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:15.294Z,1513257915.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:15.694Z,1513257915.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:15.777Z,1513257915.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:16.573Z,1513257916.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:16.977Z,1513257916.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:17.774Z,1513257917.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:18.569Z,1513257918.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:18.973Z,1513257918.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:19.199Z,1513257919.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:19.338Z,1513257919.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:19.712Z,1513257919.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:19.770Z,1513257919.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:20.150Z,1513257920.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:20.515Z,1513257920.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:20.565Z,1513257920.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:20.895Z,1513257920.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:20.969Z,1513257920.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:21.293Z,1513257921.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:21.698Z,1513257921.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:21.767Z,1513257921.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:22.103Z,1513257922.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:22.507Z,1513257922.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:22.562Z,1513257922.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:22.933Z,1513257922.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:22.977Z,1513257922.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:25:23.332Z,1513257923.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:23.703Z,1513257923.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:24.107Z,1513257924.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:24.516Z,1513257924.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:24.903Z,1513257924.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:25.308Z,1513257925.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:25.711Z,1513257925.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:26.115Z,1513257926.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:26.599Z,1513257926.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:26.933Z,1513257926.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:27.299Z,1513257927.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:27.694Z,1513257927.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:28.096Z,1513257928.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:28.586Z,1513257928.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:28.939Z,1513257928.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:29.321Z,1513257929.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:29.703Z,1513257929.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:30.108Z,1513257930.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:30.526Z,1513257930.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:30.919Z,1513257930.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:31.324Z,1513257931.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:31.732Z,1513257931.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:32.128Z,1513257932.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:32.516Z,1513257932.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:32.925Z,1513257932.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:33.319Z,1513257933.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:33.712Z,1513257933.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:34.106Z,1513257934.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:34.550Z,1513257934.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:35.095Z,1513257935.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:35.343Z,1513257935.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:35.742Z,1513257935.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:36.107Z,1513257936.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:36.495Z,1513257936.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:36.927Z,1513257936.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:37.327Z,1513257937.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:37.755Z,1513257937.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:38.115Z,1513257938.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:38.507Z,1513257938.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:38.912Z,1513257938.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:39.306Z,1513257939.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:39.709Z,1513257939.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:40.110Z,1513257940.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:40.596Z,1513257940.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:40.956Z,1513257940.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:41.329Z,1513257941.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:41.716Z,1513257941.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:42.092Z,1513257942.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:42.495Z,1513257942.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:42.909Z,1513257942.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:43.350Z,1513257943.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:43.719Z,1513257943.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:44.113Z,1513257944.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:44.498Z,1513257944.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:44.925Z,1513257944.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:45.293Z,1513257945.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:45.699Z,1513257945.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:46.139Z,1513257946.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:46.552Z,1513257946.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:46.916Z,1513257946.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:47.308Z,1513257947.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:47.710Z,1513257947.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:48.095Z,1513257948.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:48.519Z,1513257948.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:48.901Z,1513257948.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:49.340Z,1513257949.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:49.711Z,1513257949.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:50.119Z,1513257950.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:50.507Z,1513257950.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:50.914Z,1513257950.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:51.287Z,1513257951.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:51.691Z,1513257951.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:52.116Z,1513257952.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:52.516Z,1513257952.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:52.967Z,1513257952.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:53.331Z,1513257953.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:53.719Z,1513257953.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:54.118Z,1513257954.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:54.495Z,1513257954.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:54.900Z,1513257954.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:55.300Z,1513257955.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:55.703Z,1513257955.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:56.155Z,1513257956.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:56.564Z,1513257956.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:56.950Z,1513257956.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:57.299Z,1513257957.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:57.699Z,1513257957.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:58.099Z,1513257958.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:58.532Z,1513257958.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:58.922Z,1513257958.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:59.375Z,1513257959.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:25:59.714Z,1513257959.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:00.186Z,1513257960.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:00.493Z,1513257960.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:00.890Z,1513257960.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:01.327Z,1513257961.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:01.723Z,1513257961.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:02.126Z,1513257962.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:02.540Z,1513257962.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:02.901Z,1513257962.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:03.303Z,1513257963.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:03.693Z,1513257963.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:04.096Z,1513257964.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:04.503Z,1513257964.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:04.904Z,1513257964.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:05.300Z,1513257965.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:05.739Z,1513257965.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:06.130Z,1513257966.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:06.500Z,1513257966.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:06.897Z,1513257966.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:07.389Z,1513257967.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:07.727Z,1513257967.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:08.104Z,1513257968.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:08.578Z,1513257968.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:08.958Z,1513257968.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:09.320Z,1513257969.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:09.702Z,1513257969.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:10.098Z,1513257970.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:10.601Z,1513257970.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:10.938Z,1513257970.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:11.327Z,1513257971.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:11.701Z,1513257971.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:12.127Z,1513257972.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:12.515Z,1513257972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:12.903Z,1513257972.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:13.378Z,1513257973.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:13.708Z,1513257973.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:14.102Z,1513257974.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:14.495Z,1513257974.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:14.895Z,1513257974.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:14.898Z,1513257974.898 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:26:14.898Z,1513257974.898 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:26:14.899Z,1513257974.899 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:26:14.899Z,1513257974.899 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:26:15.298Z,1513257975.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:15.301Z,1513257975.301 [Default:CheckIn:D] Stopped
2017-12-14T13:26:15.301Z,1513257975.301 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:26:15.702Z,1513257975.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:15.725Z,1513257975.725 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.998503 min 
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn:E] Stopped
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn] Stopped
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn](INFO): Running loop #75
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn] Running Loop=75
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:26:15.726Z,1513257975.726 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:26:20.771Z,1513257980.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:20.971Z,1513257980.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:21.391Z,1513257981.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:21.777Z,1513257981.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:22.182Z,1513257982.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:22.601Z,1513257982.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:22.966Z,1513257982.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:23.359Z,1513257983.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:23.749Z,1513257983.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:24.148Z,1513257984.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:24.576Z,1513257984.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:24.935Z,1513257984.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:25.355Z,1513257985.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:25.748Z,1513257985.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:26.111Z,1513257986.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:26.560Z,1513257986.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:26.943Z,1513257986.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:27.382Z,1513257987.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:27.721Z,1513257987.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:28.147Z,1513257988.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:28.584Z,1513257988.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:28.958Z,1513257988.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:29.367Z,1513257989.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:29.744Z,1513257989.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:30.133Z,1513257990.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:30.605Z,1513257990.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:30.962Z,1513257990.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:31.357Z,1513257991.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:31.731Z,1513257991.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:32.218Z,1513257992.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:32.543Z,1513257992.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:32.960Z,1513257992.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:33.351Z,1513257993.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:33.762Z,1513257993.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:34.150Z,1513257994.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:34.530Z,1513257994.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:34.928Z,1513257994.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:35.378Z,1513257995.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:35.737Z,1513257995.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:36.170Z,1513257996.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:36.599Z,1513257996.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:36.928Z,1513257996.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:37.359Z,1513257997.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:37.731Z,1513257997.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:38.136Z,1513257998.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:38.625Z,1513257998.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:38.963Z,1513257998.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:39.353Z,1513257999.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:39.737Z,1513257999.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:40.115Z,1513258000.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:40.521Z,1513258000.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:40.930Z,1513258000.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:41.332Z,1513258001.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:41.750Z,1513258001.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:42.229Z,1513258002.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:42.534Z,1513258002.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:43.008Z,1513258003.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:43.341Z,1513258003.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:43.737Z,1513258003.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:44.142Z,1513258004.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:44.573Z,1513258004.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:44.960Z,1513258004.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:45.379Z,1513258005.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:45.753Z,1513258005.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:46.129Z,1513258006.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:46.526Z,1513258006.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:46.945Z,1513258006.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:47.350Z,1513258007.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:47.791Z,1513258007.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:48.151Z,1513258008.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:48.515Z,1513258008.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:48.951Z,1513258008.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:49.349Z,1513258009.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:49.723Z,1513258009.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:50.178Z,1513258010.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:50.616Z,1513258010.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:50.935Z,1513258010.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:51.363Z,1513258011.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:51.704Z,1513258011.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:52.108Z,1513258012.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:52.588Z,1513258012.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:52.916Z,1513258012.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:53.320Z,1513258013.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:53.763Z,1513258013.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:54.119Z,1513258014.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:54.548Z,1513258014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:54.911Z,1513258014.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:55.312Z,1513258015.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:55.723Z,1513258015.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:56.115Z,1513258016.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:56.541Z,1513258016.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:56.937Z,1513258016.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:57.344Z,1513258017.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:57.712Z,1513258017.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:58.116Z,1513258018.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:58.532Z,1513258018.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:58.934Z,1513258018.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:59.332Z,1513258019.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:26:59.739Z,1513258019.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:00.132Z,1513258020.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:00.526Z,1513258020.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:00.957Z,1513258020.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:01.320Z,1513258021.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:01.712Z,1513258021.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:02.122Z,1513258022.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:02.523Z,1513258022.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:02.930Z,1513258022.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:03.335Z,1513258023.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:03.758Z,1513258023.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:04.155Z,1513258024.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:04.602Z,1513258024.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:04.935Z,1513258024.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:05.377Z,1513258025.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:05.787Z,1513258025.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:06.178Z,1513258026.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:06.580Z,1513258026.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:06.979Z,1513258026.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:07.323Z,1513258027.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:07.739Z,1513258027.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:07.798Z,1513258027.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:08.127Z,1513258028.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:08.527Z,1513258028.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:08.593Z,1513258028.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:08.955Z,1513258028.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:08.997Z,1513258028.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:09.329Z,1513258029.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:09.722Z,1513258029.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:09.793Z,1513258029.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:10.139Z,1513258030.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:10.508Z,1513258030.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:10.589Z,1513258030.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:10.934Z,1513258030.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:11.308Z,1513258031.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:11.386Z,1513258031.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:11.739Z,1513258031.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:12.148Z,1513258032.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:12.183Z,1513258032.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:12.535Z,1513258032.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:12.913Z,1513258032.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:12.978Z,1513258032.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:13.320Z,1513258033.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:13.712Z,1513258033.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:13.773Z,1513258033.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:14.116Z,1513258034.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:14.540Z,1513258034.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:14.935Z,1513258034.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:15.347Z,1513258035.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:15.724Z,1513258035.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:19.268Z,1513258039.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:19.358Z,1513258039.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:19.374Z,1513258039.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:19.763Z,1513258039.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:20.153Z,1513258040.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:20.160Z,1513258040.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:20.598Z,1513258040.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:20.950Z,1513258040.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:20.953Z,1513258040.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:21.353Z,1513258041.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:21.745Z,1513258041.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:21.758Z,1513258041.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:22.150Z,1513258042.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:22.542Z,1513258042.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:22.567Z,1513258042.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:23.001Z,1513258043.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:23.339Z,1513258043.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:23.404Z,1513258043.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:23.763Z,1513258043.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:24.131Z,1513258044.131 [PNI_TCM](ERROR): CRC does not match. Expected:0x56016 got:0x4635
2017-12-14T13:27:24.134Z,1513258044.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:24.156Z,1513258044.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:24.555Z,1513258044.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:24.929Z,1513258044.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:24.970Z,1513258044.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:25.378Z,1513258045.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:25.622Z,1513258045.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:25.770Z,1513258045.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:26.026Z,1513258046.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:26.242Z,1513258046.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:26.429Z,1513258046.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:26.551Z,1513258046.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:26.834Z,1513258046.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:26.948Z,1513258046.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:27.237Z,1513258047.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:27.358Z,1513258047.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:27.641Z,1513258047.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:27.751Z,1513258047.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:28.046Z,1513258048.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:28.240Z,1513258048.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:28.449Z,1513258048.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:28.559Z,1513258048.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:28.854Z,1513258048.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:28.955Z,1513258048.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:29.258Z,1513258049.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:29.363Z,1513258049.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:29.770Z,1513258049.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:30.054Z,1513258050.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:30.153Z,1513258050.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:30.560Z,1513258050.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:30.665Z,1513258050.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:30.967Z,1513258050.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:31.442Z,1513258051.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:31.461Z,1513258051.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:31.752Z,1513258051.752 [PNI_TCM](ERROR): CRC does not match. Expected:0x38359 got:0x16268
2017-12-14T13:27:31.778Z,1513258051.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:32.179Z,1513258052.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:32.260Z,1513258052.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:32.627Z,1513258052.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:32.983Z,1513258052.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:32.997Z,1513258052.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:33.349Z,1513258053.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:33.745Z,1513258053.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:33.793Z,1513258053.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:34.144Z,1513258054.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:34.590Z,1513258054.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:34.614Z,1513258054.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:34.968Z,1513258054.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:34.993Z,1513258054.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:35.363Z,1513258055.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:35.747Z,1513258055.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:35.790Z,1513258055.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:36.245Z,1513258056.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:36.559Z,1513258056.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:36.612Z,1513258056.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:36.954Z,1513258056.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:37.017Z,1513258057.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:37.358Z,1513258057.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:37.771Z,1513258057.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:37.813Z,1513258057.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:38.225Z,1513258058.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:38.557Z,1513258058.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:38.609Z,1513258058.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:39.013Z,1513258059.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:39.016Z,1513258059.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:39.367Z,1513258059.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:39.757Z,1513258059.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:39.809Z,1513258059.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:40.140Z,1513258060.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:40.558Z,1513258060.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:40.606Z,1513258060.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:40.963Z,1513258060.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:41.384Z,1513258061.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:41.401Z,1513258061.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:41.748Z,1513258061.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:42.199Z,1513258062.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:42.234Z,1513258062.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:42.567Z,1513258062.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:42.649Z,1513258062.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:42.942Z,1513258062.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:43.362Z,1513258063.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:43.446Z,1513258063.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:43.771Z,1513258063.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:44.169Z,1513258064.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:44.243Z,1513258064.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:44.553Z,1513258064.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:44.669Z,1513258064.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:27:44.990Z,1513258064.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:45.355Z,1513258065.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:45.759Z,1513258065.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:46.144Z,1513258066.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:46.614Z,1513258066.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:46.962Z,1513258066.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:47.370Z,1513258067.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:47.760Z,1513258067.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:48.161Z,1513258068.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:48.672Z,1513258068.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:48.972Z,1513258068.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:49.370Z,1513258069.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:49.749Z,1513258069.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.152Z,1513258070.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.556Z,1513258070.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.948Z,1513258070.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.948Z,1513258070.948 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 258
2017-12-14T13:27:50.948Z,1513258070.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:27:50.950Z,1513258070.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.951Z,1513258070.951 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 258
2017-12-14T13:27:50.951Z,1513258070.951 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:27:50.952Z,1513258070.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:50.953Z,1513258070.953 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 258
2017-12-14T13:27:50.953Z,1513258070.953 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:27:50.981Z,1513258070.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:27:50.981Z,1513258070.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:27:50.982Z,1513258070.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:27:51.370Z,1513258071.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:27:51.370Z,1513258071.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 258
2017-12-14T13:27:51.371Z,1513258071.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:27:51.371Z,1513258071.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 258
2017-12-14T13:27:51.371Z,1513258071.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:27:51.371Z,1513258071.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 258
2017-12-14T13:27:51.848Z,1513258071.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:27:51.848Z,1513258071.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:27:51.849Z,1513258071.849 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:27:51.849Z,1513258071.849 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:27:51.850Z,1513258071.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:27:51.850Z,1513258071.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:27:51.850Z,1513258071.850 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:27:51.851Z,1513258071.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:27:51.851Z,1513258071.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:27:52.149Z,1513258072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:52.547Z,1513258072.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:52.959Z,1513258072.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:53.407Z,1513258073.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:53.794Z,1513258073.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:54.151Z,1513258074.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:54.555Z,1513258074.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:54.991Z,1513258074.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:55.359Z,1513258075.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:55.804Z,1513258075.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:56.152Z,1513258076.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:56.546Z,1513258076.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:57.003Z,1513258077.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:57.355Z,1513258077.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:57.740Z,1513258077.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:58.139Z,1513258078.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:58.563Z,1513258078.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:58.986Z,1513258078.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:59.370Z,1513258079.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:27:59.742Z,1513258079.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:00.167Z,1513258080.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:00.621Z,1513258080.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:00.947Z,1513258080.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:01.358Z,1513258081.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:01.764Z,1513258081.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:02.167Z,1513258082.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:02.609Z,1513258082.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:02.943Z,1513258082.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:03.362Z,1513258083.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:03.743Z,1513258083.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:04.241Z,1513258084.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:04.558Z,1513258084.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:04.971Z,1513258084.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:05.414Z,1513258085.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:05.758Z,1513258085.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:06.157Z,1513258086.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:06.563Z,1513258086.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:06.946Z,1513258086.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:07.348Z,1513258087.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:07.750Z,1513258087.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:08.235Z,1513258088.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:08.555Z,1513258088.555 [PNI_TCM](ERROR): CRC does not match. Expected:0x5840 got:0x30745
2017-12-14T13:28:08.583Z,1513258088.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:08.963Z,1513258088.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:09.354Z,1513258089.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:09.766Z,1513258089.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:10.189Z,1513258090.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:10.559Z,1513258090.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:10.957Z,1513258090.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:11.362Z,1513258091.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:11.775Z,1513258091.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:12.159Z,1513258092.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:12.560Z,1513258092.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:12.959Z,1513258092.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:13.367Z,1513258093.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:13.771Z,1513258093.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:14.171Z,1513258094.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:14.635Z,1513258094.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:15.003Z,1513258095.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:15.366Z,1513258095.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:15.749Z,1513258095.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:19.287Z,1513258099.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:19.419Z,1513258099.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:19.827Z,1513258099.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:20.264Z,1513258100.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:20.623Z,1513258100.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:21.003Z,1513258101.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:21.377Z,1513258101.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:21.805Z,1513258101.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:22.266Z,1513258102.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:22.591Z,1513258102.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:23.003Z,1513258103.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:23.380Z,1513258103.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:23.776Z,1513258103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:24.260Z,1513258104.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:24.608Z,1513258104.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:24.991Z,1513258104.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:25.387Z,1513258105.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:25.782Z,1513258105.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:26.180Z,1513258106.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:26.596Z,1513258106.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:26.977Z,1513258106.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:27.391Z,1513258107.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:27.790Z,1513258107.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:28.196Z,1513258108.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:28.655Z,1513258108.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:28.984Z,1513258108.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:29.385Z,1513258109.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:29.787Z,1513258109.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:30.180Z,1513258110.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:30.629Z,1513258110.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:30.994Z,1513258110.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:31.400Z,1513258111.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:31.776Z,1513258111.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:32.278Z,1513258112.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:32.574Z,1513258112.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:32.979Z,1513258112.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:33.387Z,1513258113.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:33.799Z,1513258113.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:34.299Z,1513258114.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:34.573Z,1513258114.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:34.975Z,1513258114.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:35.381Z,1513258115.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:35.775Z,1513258115.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:36.254Z,1513258116.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:36.576Z,1513258116.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:36.986Z,1513258116.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:37.386Z,1513258117.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:37.781Z,1513258117.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:38.258Z,1513258118.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:38.586Z,1513258118.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:38.987Z,1513258118.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:39.387Z,1513258119.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:39.788Z,1513258119.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:40.196Z,1513258120.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:40.640Z,1513258120.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:40.995Z,1513258120.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:41.376Z,1513258121.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:41.803Z,1513258121.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:42.179Z,1513258122.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:42.659Z,1513258122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:43.007Z,1513258123.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:43.390Z,1513258123.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:43.780Z,1513258123.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:44.194Z,1513258124.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:44.624Z,1513258124.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:44.992Z,1513258124.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:45.396Z,1513258125.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:45.795Z,1513258125.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:46.247Z,1513258126.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:46.592Z,1513258126.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:46.976Z,1513258126.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:47.384Z,1513258127.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:47.775Z,1513258127.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:48.250Z,1513258128.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:48.595Z,1513258128.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:48.993Z,1513258128.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:49.386Z,1513258129.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:49.788Z,1513258129.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:50.234Z,1513258130.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:50.625Z,1513258130.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:51.008Z,1513258131.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:51.395Z,1513258131.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:51.788Z,1513258131.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:52.256Z,1513258132.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:52.579Z,1513258132.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:52.978Z,1513258132.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:53.387Z,1513258133.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:53.825Z,1513258133.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:54.179Z,1513258134.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:54.596Z,1513258134.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:54.991Z,1513258134.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:55.392Z,1513258135.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:55.780Z,1513258135.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:56.172Z,1513258136.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:56.644Z,1513258136.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:57.017Z,1513258137.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:57.401Z,1513258137.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:57.777Z,1513258137.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:58.203Z,1513258138.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:58.655Z,1513258138.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:58.982Z,1513258138.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:59.380Z,1513258139.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:28:59.788Z,1513258139.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:00.296Z,1513258140.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:00.598Z,1513258140.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:01.011Z,1513258141.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:01.402Z,1513258141.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:01.793Z,1513258141.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:02.256Z,1513258142.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:02.606Z,1513258142.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:03.022Z,1513258143.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:03.437Z,1513258143.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:03.795Z,1513258143.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:04.273Z,1513258144.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:04.585Z,1513258144.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:05.016Z,1513258145.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:05.384Z,1513258145.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:05.830Z,1513258145.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:06.235Z,1513258146.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:06.633Z,1513258146.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:06.988Z,1513258146.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:07.391Z,1513258147.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:07.781Z,1513258147.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:08.278Z,1513258148.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:08.586Z,1513258148.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:08.990Z,1513258148.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:09.393Z,1513258149.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:09.851Z,1513258149.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:10.195Z,1513258150.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:10.647Z,1513258150.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:10.985Z,1513258150.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:11.382Z,1513258151.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:11.794Z,1513258151.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:12.167Z,1513258152.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:12.648Z,1513258152.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:13.115Z,1513258153.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:13.394Z,1513258153.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:13.793Z,1513258153.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:14.258Z,1513258154.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:14.582Z,1513258154.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:14.974Z,1513258154.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:15.412Z,1513258155.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:15.787Z,1513258155.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:19.474Z,1513258159.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:19.512Z,1513258159.512 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:29:19.627Z,1513258159.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:19.983Z,1513258159.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:20.379Z,1513258160.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:20.776Z,1513258160.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:21.182Z,1513258161.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:21.587Z,1513258161.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:21.986Z,1513258161.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:22.378Z,1513258162.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:22.811Z,1513258162.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:23.183Z,1513258163.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:23.584Z,1513258163.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:23.991Z,1513258163.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:24.373Z,1513258164.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:24.860Z,1513258164.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:25.212Z,1513258165.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:25.591Z,1513258165.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:26.027Z,1513258166.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:26.391Z,1513258166.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:26.807Z,1513258166.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:27.191Z,1513258167.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:27.588Z,1513258167.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:27.988Z,1513258167.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:28.384Z,1513258168.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:28.787Z,1513258168.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:29.253Z,1513258169.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:29.593Z,1513258169.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:29.994Z,1513258169.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:30.395Z,1513258170.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:30.771Z,1513258170.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:31.173Z,1513258171.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:31.584Z,1513258171.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:31.997Z,1513258171.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:32.427Z,1513258172.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:32.772Z,1513258172.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:33.224Z,1513258173.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:33.580Z,1513258173.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:34.001Z,1513258174.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:34.375Z,1513258174.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:34.783Z,1513258174.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:35.211Z,1513258175.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:35.639Z,1513258175.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:35.987Z,1513258175.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:36.364Z,1513258176.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:36.763Z,1513258176.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:37.195Z,1513258177.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:37.595Z,1513258177.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:37.990Z,1513258177.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:38.368Z,1513258178.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:38.799Z,1513258178.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:39.195Z,1513258179.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:39.596Z,1513258179.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:39.980Z,1513258179.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:40.372Z,1513258180.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:40.775Z,1513258180.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:41.205Z,1513258181.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:41.583Z,1513258181.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:42.050Z,1513258182.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:42.375Z,1513258182.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:42.782Z,1513258182.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:43.181Z,1513258183.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:43.581Z,1513258183.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:43.987Z,1513258183.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:44.020Z,1513258184.020 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T13:29:44.020Z,1513258184.020 [DropWeight] No Fault, FailCount= 1
2017-12-14T13:29:44.377Z,1513258184.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:44.773Z,1513258184.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:45.227Z,1513258185.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:45.587Z,1513258185.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:45.980Z,1513258185.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:46.376Z,1513258186.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:46.787Z,1513258186.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:47.243Z,1513258187.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:47.585Z,1513258187.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:47.987Z,1513258187.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:48.423Z,1513258188.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:48.778Z,1513258188.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:49.223Z,1513258189.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:49.584Z,1513258189.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:49.986Z,1513258189.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:50.379Z,1513258190.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:50.781Z,1513258190.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:51.183Z,1513258191.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:51.622Z,1513258191.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:51.983Z,1513258191.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:52.383Z,1513258192.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:52.786Z,1513258192.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:53.190Z,1513258193.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:53.584Z,1513258193.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:53.991Z,1513258193.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:54.383Z,1513258194.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:54.847Z,1513258194.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:55.188Z,1513258195.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:55.588Z,1513258195.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:55.991Z,1513258195.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:56.382Z,1513258196.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:56.783Z,1513258196.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:57.187Z,1513258197.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:57.630Z,1513258197.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:58.001Z,1513258198.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:58.387Z,1513258198.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:58.790Z,1513258198.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:59.194Z,1513258199.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:59.595Z,1513258199.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:29:59.997Z,1513258199.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:00.379Z,1513258200.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:00.776Z,1513258200.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:01.261Z,1513258201.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:01.580Z,1513258201.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:01.980Z,1513258201.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:02.422Z,1513258202.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:02.772Z,1513258202.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:03.182Z,1513258203.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:03.583Z,1513258203.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:03.978Z,1513258203.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:04.433Z,1513258204.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:04.782Z,1513258204.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:05.181Z,1513258205.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:05.587Z,1513258205.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:05.982Z,1513258205.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:06.382Z,1513258206.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:06.774Z,1513258206.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:07.186Z,1513258207.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:07.629Z,1513258207.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:07.991Z,1513258207.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:08.390Z,1513258208.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:08.769Z,1513258208.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:09.189Z,1513258209.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:09.616Z,1513258209.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:09.976Z,1513258209.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:10.371Z,1513258210.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:10.847Z,1513258210.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:11.175Z,1513258211.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:11.607Z,1513258211.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:11.976Z,1513258211.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:12.372Z,1513258212.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:12.772Z,1513258212.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:13.205Z,1513258213.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:13.580Z,1513258213.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:14.030Z,1513258214.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:14.380Z,1513258214.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:14.772Z,1513258214.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:15.227Z,1513258215.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:15.577Z,1513258215.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:15.979Z,1513258215.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:19.370Z,1513258219.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:19.507Z,1513258219.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:19.907Z,1513258219.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:20.281Z,1513258220.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:20.690Z,1513258220.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:21.063Z,1513258221.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:21.463Z,1513258221.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:21.864Z,1513258221.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:22.291Z,1513258222.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:22.696Z,1513258222.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:23.099Z,1513258223.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:23.513Z,1513258223.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:23.868Z,1513258223.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:24.284Z,1513258224.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:24.683Z,1513258224.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:25.078Z,1513258225.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:25.483Z,1513258225.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:25.879Z,1513258225.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:26.303Z,1513258226.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:26.708Z,1513258226.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:27.067Z,1513258227.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:27.514Z,1513258227.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:27.888Z,1513258227.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:28.288Z,1513258228.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:28.672Z,1513258228.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:29.075Z,1513258229.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:29.471Z,1513258229.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:29.895Z,1513258229.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:30.284Z,1513258230.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:30.695Z,1513258230.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:31.099Z,1513258231.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:31.487Z,1513258231.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:31.905Z,1513258231.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:32.334Z,1513258232.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:32.699Z,1513258232.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:33.119Z,1513258233.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:33.503Z,1513258233.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:33.896Z,1513258233.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:34.295Z,1513258234.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:34.668Z,1513258234.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:35.066Z,1513258235.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:35.475Z,1513258235.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:35.868Z,1513258235.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:36.323Z,1513258236.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:36.676Z,1513258236.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:37.083Z,1513258237.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:37.483Z,1513258237.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:37.864Z,1513258237.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:38.286Z,1513258238.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:38.671Z,1513258238.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:39.079Z,1513258239.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:39.539Z,1513258239.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:39.879Z,1513258239.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:40.288Z,1513258240.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:40.672Z,1513258240.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:41.072Z,1513258241.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:41.472Z,1513258241.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:41.896Z,1513258241.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:42.283Z,1513258242.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:42.731Z,1513258242.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:43.089Z,1513258243.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:43.475Z,1513258243.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:43.883Z,1513258243.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:44.273Z,1513258244.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:44.679Z,1513258244.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:45.074Z,1513258245.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:45.489Z,1513258245.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:45.938Z,1513258245.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:46.335Z,1513258246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:46.663Z,1513258246.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:47.063Z,1513258247.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:47.487Z,1513258247.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:47.866Z,1513258247.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:48.263Z,1513258248.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:48.689Z,1513258248.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:49.121Z,1513258249.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:49.476Z,1513258249.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:49.876Z,1513258249.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:50.271Z,1513258250.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:50.669Z,1513258250.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.069Z,1513258251.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.480Z,1513258251.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.883Z,1513258251.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.883Z,1513258251.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 259
2017-12-14T13:30:51.883Z,1513258251.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:30:51.885Z,1513258251.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.885Z,1513258251.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 259
2017-12-14T13:30:51.885Z,1513258251.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:30:51.887Z,1513258251.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:51.888Z,1513258251.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 259
2017-12-14T13:30:51.888Z,1513258251.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:30:51.929Z,1513258251.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:30:51.929Z,1513258251.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:30:51.930Z,1513258251.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:30:52.384Z,1513258252.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:30:52.384Z,1513258252.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 259
2017-12-14T13:30:52.393Z,1513258252.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:30:52.393Z,1513258252.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 259
2017-12-14T13:30:52.394Z,1513258252.394 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:30:52.394Z,1513258252.394 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 259
2017-12-14T13:30:52.682Z,1513258252.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:30:52.682Z,1513258252.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:30:52.683Z,1513258252.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:30:52.683Z,1513258252.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:30:52.683Z,1513258252.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:30:52.684Z,1513258252.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:30:52.684Z,1513258252.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:30:52.684Z,1513258252.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:30:52.689Z,1513258252.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:30:53.091Z,1513258253.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:53.484Z,1513258253.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:53.863Z,1513258253.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:54.319Z,1513258254.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:54.688Z,1513258254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:55.119Z,1513258255.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:55.511Z,1513258255.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:55.898Z,1513258255.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:56.296Z,1513258256.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:56.674Z,1513258256.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:57.069Z,1513258257.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:57.473Z,1513258257.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:57.877Z,1513258257.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:58.297Z,1513258258.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:58.707Z,1513258258.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:59.069Z,1513258259.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:59.476Z,1513258259.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:30:59.875Z,1513258259.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:00.331Z,1513258260.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:00.689Z,1513258260.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:01.096Z,1513258261.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:01.491Z,1513258261.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:01.906Z,1513258261.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:02.280Z,1513258262.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:02.668Z,1513258262.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:03.068Z,1513258263.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:03.498Z,1513258263.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:03.896Z,1513258263.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:04.311Z,1513258264.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:04.668Z,1513258264.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:05.117Z,1513258265.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:05.469Z,1513258265.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:05.873Z,1513258265.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:06.303Z,1513258266.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:06.672Z,1513258266.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:07.085Z,1513258267.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:07.487Z,1513258267.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:07.869Z,1513258267.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:08.330Z,1513258268.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:08.677Z,1513258268.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:09.078Z,1513258269.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:09.483Z,1513258269.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:09.886Z,1513258269.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:10.292Z,1513258270.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:10.672Z,1513258270.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:11.083Z,1513258271.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:11.500Z,1513258271.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:11.880Z,1513258271.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:12.292Z,1513258272.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:12.688Z,1513258272.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:13.090Z,1513258273.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:13.486Z,1513258273.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:13.864Z,1513258273.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:14.349Z,1513258274.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:14.694Z,1513258274.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:15.129Z,1513258275.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:15.507Z,1513258275.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:15.875Z,1513258275.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:15.912Z,1513258275.912 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:26:15.7Z
2017-12-14T13:31:15.912Z,1513258275.912 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:31:15.912Z,1513258275.912 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:31:16.328Z,1513258276.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:17.774Z,1513258277.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:18.570Z,1513258278.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:18.978Z,1513258278.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:24.389Z,1513258284.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:25.566Z,1513258285.566 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0300.lzma
2017-12-14T13:31:25.634Z,1513258285.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:25.784Z,1513258285.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:26.072Z,1513258286.072 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0300.lzma.bak
2017-12-14T13:31:26.072Z,1513258286.072 [DataOverHttps](INFO): SBD MOMSN=5438818
2017-12-14T13:31:26.236Z,1513258286.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:27.452Z,1513258287.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:27.624Z,1513258287.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:35.268Z,1513258295.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:35.459Z,1513258295.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:35.863Z,1513258295.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:36.291Z,1513258296.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:36.627Z,1513258296.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:37.031Z,1513258297.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:43.862Z,1513258303.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:43.932Z,1513258303.932 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20171214T002839/Express0301.lzma
2017-12-14T13:31:44.003Z,1513258304.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:44.414Z,1513258304.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:44.724Z,1513258304.724 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0301.lzma.bak
2017-12-14T13:31:44.724Z,1513258304.724 [DataOverHttps](INFO): SBD MOMSN=5438820
2017-12-14T13:31:44.808Z,1513258304.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:45.758Z,1513258305.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:46.554Z,1513258306.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:46.978Z,1513258306.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:31:46.980Z,1513258306.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:46.992Z,1513258306.992 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:31:46.992Z,1513258306.992 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:31:46.992Z,1513258306.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:31:47.124Z,1513258307.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:52.639Z,1513258312.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:52.770Z,1513258312.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:53.144Z,1513258313.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:53.547Z,1513258313.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:53.975Z,1513258313.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:54.366Z,1513258314.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:54.763Z,1513258314.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:55.125Z,1513258315.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:55.563Z,1513258315.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:55.955Z,1513258315.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:56.335Z,1513258316.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:56.729Z,1513258316.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:57.131Z,1513258317.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:57.532Z,1513258317.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:57.935Z,1513258317.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:58.336Z,1513258318.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:58.746Z,1513258318.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:59.139Z,1513258319.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:59.536Z,1513258319.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:31:59.935Z,1513258319.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:00.339Z,1513258320.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:00.771Z,1513258320.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:01.140Z,1513258321.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:01.526Z,1513258321.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:01.927Z,1513258321.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:02.331Z,1513258322.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:02.734Z,1513258322.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:03.174Z,1513258323.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:03.541Z,1513258323.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:03.940Z,1513258323.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:04.345Z,1513258324.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:04.735Z,1513258324.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:05.128Z,1513258325.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:05.529Z,1513258325.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:05.935Z,1513258325.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:06.286Z,1513258326.286 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T13:32:06.286Z,1513258326.286 [NAL9602] Data Fault, FailCount= 1
2017-12-14T13:32:06.287Z,1513258326.287 [NAL9602](ERROR): Data Fault
2017-12-14T13:32:06.348Z,1513258326.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:06.377Z,1513258326.377 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T13:32:06.690Z,1513258326.690 [NAL9602](INFO): Powering down
2017-12-14T13:32:06.743Z,1513258326.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:07.138Z,1513258327.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:07.516Z,1513258327.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:07.550Z,1513258327.550 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T13:32:07.550Z,1513258327.550 [NAL9602] No Fault, FailCount= 1
2017-12-14T13:32:07.939Z,1513258327.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:08.325Z,1513258328.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:08.731Z,1513258328.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:09.126Z,1513258329.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:09.527Z,1513258329.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:09.926Z,1513258329.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:10.334Z,1513258330.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:10.737Z,1513258330.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:11.185Z,1513258331.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:11.530Z,1513258331.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:11.926Z,1513258331.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:12.327Z,1513258332.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:12.725Z,1513258332.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:13.131Z,1513258333.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:13.526Z,1513258333.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:13.746Z,1513258333.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:13.992Z,1513258333.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:14.379Z,1513258334.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:14.543Z,1513258334.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:14.730Z,1513258334.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:14.953Z,1513258334.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:15.131Z,1513258335.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:15.586Z,1513258335.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:15.750Z,1513258335.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:15.932Z,1513258335.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:16.355Z,1513258336.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:16.545Z,1513258336.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:16.743Z,1513258336.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:16.949Z,1513258336.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:17.144Z,1513258337.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:17.583Z,1513258337.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:17.746Z,1513258337.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:17.927Z,1513258337.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:18.343Z,1513258338.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:18.541Z,1513258338.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:18.742Z,1513258338.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:18.945Z,1513258338.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:19.126Z,1513258339.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:19.539Z,1513258339.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:19.741Z,1513258339.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:19.939Z,1513258339.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:20.333Z,1513258340.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:20.537Z,1513258340.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:20.789Z,1513258340.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:20.942Z,1513258340.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:21.136Z,1513258341.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:21.541Z,1513258341.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:21.737Z,1513258341.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:21.922Z,1513258341.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:22.322Z,1513258342.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:22.534Z,1513258342.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:22.747Z,1513258342.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:22.945Z,1513258342.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:23.124Z,1513258343.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:23.523Z,1513258343.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:23.741Z,1513258343.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:23.996Z,1513258343.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:24.354Z,1513258344.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:24.537Z,1513258344.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:24.727Z,1513258344.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:24.941Z,1513258344.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:25.123Z,1513258345.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:25.563Z,1513258345.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:25.745Z,1513258345.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:25.926Z,1513258345.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:26.322Z,1513258346.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:26.543Z,1513258346.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:26.754Z,1513258346.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:26.957Z,1513258346.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:27.190Z,1513258347.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:27.531Z,1513258347.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:27.753Z,1513258347.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:27.927Z,1513258347.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:28.326Z,1513258348.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:28.551Z,1513258348.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:28.728Z,1513258348.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:28.961Z,1513258348.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:29.124Z,1513258349.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:29.534Z,1513258349.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:29.757Z,1513258349.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:29.927Z,1513258349.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:30.418Z,1513258350.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:30.553Z,1513258350.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:30.767Z,1513258350.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:30.957Z,1513258350.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:31.130Z,1513258351.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:31.525Z,1513258351.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:31.958Z,1513258351.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:32.330Z,1513258352.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:32.732Z,1513258352.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:33.131Z,1513258353.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:33.213Z,1513258353.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:33.575Z,1513258353.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:33.931Z,1513258353.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:34.009Z,1513258354.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:34.326Z,1513258354.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:34.597Z,1513258354.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:34.735Z,1513258354.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:35.132Z,1513258355.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:35.393Z,1513258355.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:35.526Z,1513258355.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:35.930Z,1513258355.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:36.191Z,1513258356.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:36.335Z,1513258356.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:36.609Z,1513258356.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:36.723Z,1513258356.723 [NAL9602](INFO): Powering up NAL9602
2017-12-14T13:32:36.792Z,1513258356.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:37.138Z,1513258357.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:37.405Z,1513258357.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:37.564Z,1513258357.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:37.930Z,1513258357.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:38.202Z,1513258358.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:38.350Z,1513258358.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:38.653Z,1513258358.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:38.793Z,1513258358.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:39.121Z,1513258359.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:39.449Z,1513258359.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:39.559Z,1513258359.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:40.001Z,1513258360.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:40.246Z,1513258360.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:40.341Z,1513258360.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:40.723Z,1513258360.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:40.953Z,1513258360.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:41.127Z,1513258361.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:41.522Z,1513258361.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:41.750Z,1513258361.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:41.933Z,1513258361.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:42.326Z,1513258362.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:42.546Z,1513258362.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:42.760Z,1513258362.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:42.961Z,1513258362.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:43.179Z,1513258363.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:43.531Z,1513258363.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:43.757Z,1513258363.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:43.929Z,1513258363.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:44.327Z,1513258364.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:44.554Z,1513258364.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:44.734Z,1513258364.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:44.957Z,1513258364.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:45.128Z,1513258365.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:45.529Z,1513258365.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:45.754Z,1513258365.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:45.929Z,1513258365.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:46.387Z,1513258366.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:46.549Z,1513258366.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:46.727Z,1513258366.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:46.953Z,1513258366.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:47.128Z,1513258367.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:47.532Z,1513258367.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:47.749Z,1513258367.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:48.547Z,1513258368.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:48.953Z,1513258368.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:49.749Z,1513258369.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:50.549Z,1513258370.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:50.954Z,1513258370.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:51.113Z,1513258371.113 [NAL9602](INFO): NAL9602 initialized
2017-12-14T13:32:51.186Z,1513258371.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:51.319Z,1513258371.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:51.714Z,1513258371.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:51.749Z,1513258371.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:52.088Z,1513258372.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:52.516Z,1513258372.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:52.546Z,1513258372.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:52.891Z,1513258372.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:52.949Z,1513258372.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:53.287Z,1513258373.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:53.687Z,1513258373.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:53.745Z,1513258373.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:54.096Z,1513258374.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:54.493Z,1513258374.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:54.543Z,1513258374.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:54.900Z,1513258374.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:54.977Z,1513258374.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:55.285Z,1513258375.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:55.690Z,1513258375.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:55.774Z,1513258375.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:56.082Z,1513258376.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:56.486Z,1513258376.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:56.569Z,1513258376.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:56.890Z,1513258376.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:56.977Z,1513258376.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:57.311Z,1513258377.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:57.697Z,1513258377.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:57.773Z,1513258377.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:58.092Z,1513258378.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:58.500Z,1513258378.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:58.569Z,1513258378.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:58.930Z,1513258378.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:58.973Z,1513258378.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:32:59.289Z,1513258379.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:59.686Z,1513258379.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:32:59.769Z,1513258379.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:00.095Z,1513258380.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:00.488Z,1513258380.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:00.565Z,1513258380.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:00.888Z,1513258380.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:00.969Z,1513258380.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:01.285Z,1513258381.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:01.688Z,1513258381.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:01.765Z,1513258381.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:02.135Z,1513258382.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:02.511Z,1513258382.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:02.561Z,1513258382.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:02.880Z,1513258382.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:02.966Z,1513258382.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:03.378Z,1513258383.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:03.713Z,1513258383.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:03.761Z,1513258383.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:04.107Z,1513258384.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:04.527Z,1513258384.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:04.557Z,1513258384.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:04.886Z,1513258384.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:04.961Z,1513258384.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:05.371Z,1513258385.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:05.689Z,1513258385.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:05.757Z,1513258385.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:06.106Z,1513258386.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:06.501Z,1513258386.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:06.554Z,1513258386.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:06.913Z,1513258386.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:06.957Z,1513258386.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:07.273Z,1513258387.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:07.675Z,1513258387.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:07.753Z,1513258387.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:08.079Z,1513258388.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:08.488Z,1513258388.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:08.550Z,1513258388.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:08.900Z,1513258388.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:08.989Z,1513258388.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:09.311Z,1513258389.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:09.677Z,1513258389.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:09.786Z,1513258389.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:10.111Z,1513258390.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:10.487Z,1513258390.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:10.582Z,1513258390.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:10.895Z,1513258390.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:10.985Z,1513258390.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:11.299Z,1513258391.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:11.697Z,1513258391.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:11.782Z,1513258391.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:12.087Z,1513258392.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:12.483Z,1513258392.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:12.577Z,1513258392.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:12.889Z,1513258392.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:12.981Z,1513258392.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:13.289Z,1513258393.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:13.719Z,1513258393.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:13.777Z,1513258393.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:14.084Z,1513258394.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:14.488Z,1513258394.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:14.573Z,1513258394.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:14.889Z,1513258394.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:14.978Z,1513258394.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:15.294Z,1513258395.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:15.689Z,1513258395.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:15.773Z,1513258395.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:16.095Z,1513258396.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:16.494Z,1513258396.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:16.569Z,1513258396.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:16.902Z,1513258396.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:16.973Z,1513258396.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:17.292Z,1513258397.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:17.698Z,1513258397.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:17.769Z,1513258397.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:18.242Z,1513258398.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:18.503Z,1513258398.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:18.566Z,1513258398.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:18.882Z,1513258398.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:18.969Z,1513258398.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:19.287Z,1513258399.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:19.685Z,1513258399.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:19.765Z,1513258399.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:20.083Z,1513258400.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:20.499Z,1513258400.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:20.561Z,1513258400.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:20.907Z,1513258400.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:20.965Z,1513258400.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:21.293Z,1513258401.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:21.707Z,1513258401.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:21.761Z,1513258401.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:22.090Z,1513258402.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:22.490Z,1513258402.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:22.559Z,1513258402.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:22.899Z,1513258402.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:22.981Z,1513258402.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:23.304Z,1513258403.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:23.704Z,1513258403.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:23.781Z,1513258403.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:24.104Z,1513258404.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:24.577Z,1513258404.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:24.590Z,1513258404.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:24.876Z,1513258404.876 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T13:33:24.876Z,1513258404.876 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:33:24.876Z,1513258404.876 [BPC1](ERROR): Data Fault
2017-12-14T13:33:24.885Z,1513258404.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:24.919Z,1513258404.919 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:33:24.981Z,1513258404.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:25.292Z,1513258405.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:25.688Z,1513258405.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:25.777Z,1513258405.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:26.085Z,1513258406.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:26.100Z,1513258406.100 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:33:26.100Z,1513258406.100 [BPC1] No Fault, FailCount= 1
2017-12-14T13:33:26.563Z,1513258406.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:26.573Z,1513258406.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:26.895Z,1513258406.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:26.977Z,1513258406.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:27.295Z,1513258407.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:27.691Z,1513258407.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:27.774Z,1513258407.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:28.099Z,1513258408.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:28.496Z,1513258408.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:28.569Z,1513258408.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:28.879Z,1513258408.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:28.973Z,1513258408.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:29.280Z,1513258409.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:29.711Z,1513258409.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:29.769Z,1513258409.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:30.091Z,1513258410.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:30.482Z,1513258410.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:30.566Z,1513258410.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:30.901Z,1513258410.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:30.970Z,1513258410.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:31.287Z,1513258411.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:31.688Z,1513258411.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:31.765Z,1513258411.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:32.084Z,1513258412.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:32.530Z,1513258412.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:32.580Z,1513258412.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:32.897Z,1513258412.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:32.985Z,1513258412.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:33.292Z,1513258413.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:33.684Z,1513258413.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:33.782Z,1513258413.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:34.119Z,1513258414.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:34.500Z,1513258414.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:34.580Z,1513258414.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:34.904Z,1513258414.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:34.985Z,1513258414.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:35.302Z,1513258415.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:35.708Z,1513258415.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:35.781Z,1513258415.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:36.104Z,1513258416.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:36.497Z,1513258416.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:36.577Z,1513258416.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:36.899Z,1513258416.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:36.981Z,1513258416.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:37.298Z,1513258417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:37.683Z,1513258417.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:37.777Z,1513258417.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:38.083Z,1513258418.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:38.573Z,1513258418.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:38.639Z,1513258418.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:38.914Z,1513258418.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:38.997Z,1513258418.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:39.303Z,1513258419.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:39.702Z,1513258419.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:39.793Z,1513258419.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:40.100Z,1513258420.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:40.570Z,1513258420.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:40.606Z,1513258420.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:40.901Z,1513258420.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:41.009Z,1513258421.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:41.288Z,1513258421.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:41.688Z,1513258421.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:41.805Z,1513258421.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:42.096Z,1513258422.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:42.482Z,1513258422.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:42.601Z,1513258422.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:42.893Z,1513258422.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:43.288Z,1513258423.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:43.397Z,1513258423.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:43.740Z,1513258423.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:44.104Z,1513258424.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:44.195Z,1513258424.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:44.511Z,1513258424.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:44.626Z,1513258424.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:44.907Z,1513258424.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:45.313Z,1513258425.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:45.421Z,1513258425.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:45.724Z,1513258425.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:46.080Z,1513258426.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:46.219Z,1513258426.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:46.485Z,1513258426.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:46.625Z,1513258426.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:46.926Z,1513258426.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:47.361Z,1513258427.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:47.421Z,1513258427.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:47.708Z,1513258427.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:48.219Z,1513258428.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:48.681Z,1513258428.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:49.477Z,1513258429.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:50.273Z,1513258430.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:50.965Z,1513258430.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:51.308Z,1513258431.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:51.425Z,1513258431.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:51.764Z,1513258431.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:51.831Z,1513258431.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.187Z,1513258432.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.560Z,1513258432.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:52.632Z,1513258432.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.972Z,1513258432.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:52.987Z,1513258432.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.987Z,1513258432.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 260
2017-12-14T13:33:52.987Z,1513258432.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:33:52.989Z,1513258432.989 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.989Z,1513258432.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 260
2017-12-14T13:33:52.989Z,1513258432.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:33:52.991Z,1513258432.991 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:52.991Z,1513258432.991 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 260
2017-12-14T13:33:52.992Z,1513258432.992 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:33:53.024Z,1513258433.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:33:53.024Z,1513258433.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:33:53.024Z,1513258433.024 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:33:53.434Z,1513258433.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:33:53.434Z,1513258433.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 260
2017-12-14T13:33:53.434Z,1513258433.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:33:53.434Z,1513258433.434 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 260
2017-12-14T13:33:53.435Z,1513258433.435 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:33:53.435Z,1513258433.435 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 260
2017-12-14T13:33:53.765Z,1513258433.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:53.798Z,1513258433.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:33:53.798Z,1513258433.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:33:53.798Z,1513258433.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:33:53.799Z,1513258433.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:33:53.799Z,1513258433.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:33:53.799Z,1513258433.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:33:53.800Z,1513258433.800 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:33:53.800Z,1513258433.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:33:53.821Z,1513258433.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:33:54.252Z,1513258434.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:54.570Z,1513258434.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:54.591Z,1513258434.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:54.973Z,1513258434.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:54.991Z,1513258434.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:55.393Z,1513258435.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:55.769Z,1513258435.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:55.789Z,1513258435.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:56.264Z,1513258436.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:56.566Z,1513258436.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:56.628Z,1513258436.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:56.969Z,1513258436.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:57.004Z,1513258437.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:57.403Z,1513258437.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:57.765Z,1513258437.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:57.810Z,1513258437.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:58.258Z,1513258438.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:58.561Z,1513258438.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:58.592Z,1513258438.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:58.965Z,1513258438.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:58.995Z,1513258438.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:59.397Z,1513258439.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:33:59.761Z,1513258439.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:33:59.815Z,1513258439.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:00.275Z,1513258440.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:00.558Z,1513258440.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:00.615Z,1513258440.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:00.962Z,1513258440.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:01.003Z,1513258441.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:01.379Z,1513258441.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:01.758Z,1513258441.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:01.810Z,1513258441.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:02.275Z,1513258442.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:02.554Z,1513258442.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:02.627Z,1513258442.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:02.957Z,1513258442.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:03.015Z,1513258443.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:03.384Z,1513258443.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:03.753Z,1513258443.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:03.791Z,1513258443.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:04.184Z,1513258444.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:04.551Z,1513258444.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:04.639Z,1513258444.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:04.977Z,1513258444.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:04.999Z,1513258444.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:05.403Z,1513258445.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:05.787Z,1513258445.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:05.839Z,1513258445.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:06.198Z,1513258446.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:06.582Z,1513258446.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:06.646Z,1513258446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:06.985Z,1513258446.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:06.992Z,1513258446.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:07.405Z,1513258447.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:07.782Z,1513258447.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:07.868Z,1513258447.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:08.277Z,1513258448.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:08.578Z,1513258448.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:08.599Z,1513258448.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:08.981Z,1513258448.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:09.024Z,1513258449.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:09.408Z,1513258449.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:09.777Z,1513258449.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:09.785Z,1513258449.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:10.264Z,1513258450.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:10.574Z,1513258450.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:10.588Z,1513258450.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:10.977Z,1513258450.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:10.990Z,1513258450.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:11.430Z,1513258451.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:11.773Z,1513258451.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:11.816Z,1513258451.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:12.301Z,1513258452.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:12.570Z,1513258452.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:12.651Z,1513258452.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:12.973Z,1513258452.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:12.984Z,1513258452.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:13.391Z,1513258453.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:13.769Z,1513258453.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:13.803Z,1513258453.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:14.306Z,1513258454.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:14.565Z,1513258454.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:14.632Z,1513258454.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:14.971Z,1513258454.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:15.006Z,1513258455.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:15.381Z,1513258455.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:15.766Z,1513258455.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:15.782Z,1513258455.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:16.179Z,1513258456.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:16.562Z,1513258456.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:16.592Z,1513258456.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:16.965Z,1513258456.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:16.991Z,1513258456.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:17.399Z,1513258457.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:17.761Z,1513258457.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:17.795Z,1513258457.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:18.195Z,1513258458.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:18.559Z,1513258458.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:18.644Z,1513258458.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:18.973Z,1513258458.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:18.990Z,1513258458.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:19.390Z,1513258459.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:19.777Z,1513258459.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:19.794Z,1513258459.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:20.192Z,1513258460.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:20.574Z,1513258460.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:20.657Z,1513258460.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:21.012Z,1513258461.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:21.013Z,1513258461.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:21.411Z,1513258461.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:21.783Z,1513258461.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:21.809Z,1513258461.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:22.263Z,1513258462.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:22.581Z,1513258462.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:22.605Z,1513258462.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:23.009Z,1513258463.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:23.022Z,1513258463.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:23.415Z,1513258463.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:23.805Z,1513258463.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:23.858Z,1513258463.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:24.283Z,1513258464.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:24.594Z,1513258464.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:24.601Z,1513258464.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:24.998Z,1513258464.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:25.005Z,1513258465.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:25.393Z,1513258465.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:25.795Z,1513258465.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:25.801Z,1513258465.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:26.266Z,1513258466.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:26.597Z,1513258466.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:26.606Z,1513258466.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:27.002Z,1513258467.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:27.051Z,1513258467.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:27.398Z,1513258467.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:27.793Z,1513258467.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:27.797Z,1513258467.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:28.274Z,1513258468.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:28.580Z,1513258468.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:28.593Z,1513258468.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:28.983Z,1513258468.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:28.997Z,1513258468.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:29.419Z,1513258469.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:29.793Z,1513258469.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:29.814Z,1513258469.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:30.293Z,1513258470.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:30.590Z,1513258470.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:30.592Z,1513258470.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:30.987Z,1513258470.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:30.993Z,1513258470.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:31.391Z,1513258471.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:31.789Z,1513258471.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:31.792Z,1513258471.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:32.196Z,1513258472.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:32.586Z,1513258472.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:32.630Z,1513258472.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:32.986Z,1513258472.986 [BPC1](ERROR): Failed to parse message.
2017-12-14T13:34:32.986Z,1513258472.986 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T13:34:32.986Z,1513258472.986 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:34:32.986Z,1513258472.986 [BPC1](ERROR): Data Fault
2017-12-14T13:34:32.989Z,1513258472.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:32.997Z,1513258472.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:33.022Z,1513258473.022 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:34:33.386Z,1513258473.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:33.785Z,1513258473.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:33.792Z,1513258473.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:34.191Z,1513258474.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:34.204Z,1513258474.204 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:34:34.204Z,1513258474.204 [BPC1] No Fault, FailCount= 1
2017-12-14T13:34:34.584Z,1513258474.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:34.680Z,1513258474.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:34.990Z,1513258474.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:35.033Z,1513258475.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:35.405Z,1513258475.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:35.808Z,1513258475.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:35.829Z,1513258475.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:36.255Z,1513258476.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:36.618Z,1513258476.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:36.654Z,1513258476.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:36.998Z,1513258476.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:37.399Z,1513258477.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:37.413Z,1513258477.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:37.801Z,1513258477.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:38.211Z,1513258478.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:38.281Z,1513258478.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:38.604Z,1513258478.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:38.617Z,1513258478.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:39.008Z,1513258479.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:39.401Z,1513258479.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:39.413Z,1513258479.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:39.847Z,1513258479.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:40.211Z,1513258480.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:40.283Z,1513258480.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:40.589Z,1513258480.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:40.621Z,1513258480.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:40.986Z,1513258480.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:41.417Z,1513258481.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:41.416Z,1513258481.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:41.817Z,1513258481.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:42.214Z,1513258482.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:42.262Z,1513258482.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:42.590Z,1513258482.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:42.637Z,1513258482.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:43.093Z,1513258483.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:43.395Z,1513258483.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:43.433Z,1513258483.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:43.796Z,1513258483.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:44.231Z,1513258484.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:44.272Z,1513258484.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:44.608Z,1513258484.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:44.677Z,1513258484.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:45.012Z,1513258485.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:45.397Z,1513258485.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:45.473Z,1513258485.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:45.806Z,1513258485.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:46.254Z,1513258486.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:46.270Z,1513258486.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:46.627Z,1513258486.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:46.933Z,1513258486.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:46.983Z,1513258486.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:47.413Z,1513258487.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:47.730Z,1513258487.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:47.808Z,1513258487.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:48.530Z,1513258488.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:48.957Z,1513258488.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:49.753Z,1513258489.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:50.549Z,1513258490.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:50.953Z,1513258490.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:51.467Z,1513258491.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:51.608Z,1513258491.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:51.749Z,1513258491.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:51.957Z,1513258491.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:52.364Z,1513258492.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:52.546Z,1513258492.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:52.761Z,1513258492.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:52.949Z,1513258492.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:53.167Z,1513258493.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:53.583Z,1513258493.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:53.747Z,1513258493.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:53.960Z,1513258493.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:54.343Z,1513258494.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:54.541Z,1513258494.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:54.775Z,1513258494.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:54.945Z,1513258494.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:55.144Z,1513258495.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:55.573Z,1513258495.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:55.741Z,1513258495.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:55.981Z,1513258495.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:56.382Z,1513258496.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:56.537Z,1513258496.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:56.754Z,1513258496.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:56.941Z,1513258496.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:57.143Z,1513258497.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:57.544Z,1513258497.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:57.739Z,1513258497.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:57.939Z,1513258497.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:58.346Z,1513258498.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:58.533Z,1513258498.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:58.746Z,1513258498.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:58.937Z,1513258498.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:59.152Z,1513258499.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:59.539Z,1513258499.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:34:59.733Z,1513258499.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:34:59.950Z,1513258499.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:00.344Z,1513258500.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:00.531Z,1513258500.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:00.742Z,1513258500.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:00.949Z,1513258500.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:01.159Z,1513258501.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:01.558Z,1513258501.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:01.745Z,1513258501.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:02.007Z,1513258502.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:02.349Z,1513258502.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:02.542Z,1513258502.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:02.759Z,1513258502.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:02.949Z,1513258502.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:03.153Z,1513258503.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:03.535Z,1513258503.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:03.745Z,1513258503.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:03.931Z,1513258503.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:04.360Z,1513258504.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:04.544Z,1513258504.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:04.787Z,1513258504.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:04.949Z,1513258504.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:05.184Z,1513258505.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:05.562Z,1513258505.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:05.745Z,1513258505.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:05.935Z,1513258505.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:06.340Z,1513258506.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:06.541Z,1513258506.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:06.742Z,1513258506.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:06.945Z,1513258506.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:07.165Z,1513258507.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:07.571Z,1513258507.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:07.741Z,1513258507.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:07.971Z,1513258507.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:08.376Z,1513258508.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:08.537Z,1513258508.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:08.764Z,1513258508.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:08.941Z,1513258508.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:09.157Z,1513258509.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:09.561Z,1513258509.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:09.737Z,1513258509.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:09.947Z,1513258509.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:10.343Z,1513258510.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:10.535Z,1513258510.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:10.751Z,1513258510.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:10.941Z,1513258510.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:11.171Z,1513258511.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:11.574Z,1513258511.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:11.738Z,1513258511.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:11.940Z,1513258511.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:12.339Z,1513258512.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:12.534Z,1513258512.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:12.740Z,1513258512.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:12.937Z,1513258512.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:13.146Z,1513258513.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:13.551Z,1513258513.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:13.736Z,1513258513.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:13.947Z,1513258513.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:14.339Z,1513258514.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:14.531Z,1513258514.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:14.739Z,1513258514.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:14.945Z,1513258514.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:15.152Z,1513258515.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:15.549Z,1513258515.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:15.741Z,1513258515.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:15.990Z,1513258515.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:16.344Z,1513258516.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:16.539Z,1513258516.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:16.798Z,1513258516.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:16.953Z,1513258516.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:17.149Z,1513258517.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:17.576Z,1513258517.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:17.749Z,1513258517.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:17.990Z,1513258517.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:18.373Z,1513258518.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:18.545Z,1513258518.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:18.759Z,1513258518.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:18.949Z,1513258518.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:19.151Z,1513258519.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:19.543Z,1513258519.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:19.745Z,1513258519.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:19.945Z,1513258519.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:20.354Z,1513258520.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:20.541Z,1513258520.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:20.763Z,1513258520.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:20.945Z,1513258520.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:21.195Z,1513258521.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:21.543Z,1513258521.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:21.742Z,1513258521.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:21.949Z,1513258521.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:22.351Z,1513258522.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:22.537Z,1513258522.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:22.746Z,1513258522.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:22.942Z,1513258522.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:23.151Z,1513258523.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:23.558Z,1513258523.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:23.737Z,1513258523.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:23.956Z,1513258523.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:24.394Z,1513258524.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:24.533Z,1513258524.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:24.742Z,1513258524.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:24.938Z,1513258524.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:25.163Z,1513258525.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:25.559Z,1513258525.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:25.733Z,1513258525.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:25.962Z,1513258525.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:26.340Z,1513258526.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:26.530Z,1513258526.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:26.787Z,1513258526.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:26.937Z,1513258526.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:27.155Z,1513258527.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:27.587Z,1513258527.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:27.733Z,1513258527.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:27.959Z,1513258527.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:28.354Z,1513258528.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:28.532Z,1513258528.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:28.750Z,1513258528.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:28.949Z,1513258528.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:29.163Z,1513258529.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:29.555Z,1513258529.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:29.745Z,1513258529.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:29.969Z,1513258529.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:30.353Z,1513258530.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:30.546Z,1513258530.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:30.802Z,1513258530.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:30.953Z,1513258530.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:31.152Z,1513258531.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:31.553Z,1513258531.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:31.749Z,1513258531.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:31.955Z,1513258531.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:32.353Z,1513258532.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:32.546Z,1513258532.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:32.763Z,1513258532.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:32.949Z,1513258532.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:33.155Z,1513258533.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:33.591Z,1513258533.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:33.746Z,1513258533.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:34.000Z,1513258534.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:34.355Z,1513258534.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:34.541Z,1513258534.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:34.748Z,1513258534.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:34.946Z,1513258534.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:35.155Z,1513258535.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:35.552Z,1513258535.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:35.741Z,1513258535.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:35.932Z,1513258535.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:36.376Z,1513258536.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:36.539Z,1513258536.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:36.760Z,1513258536.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:36.945Z,1513258536.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:37.239Z,1513258537.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:37.540Z,1513258537.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:37.742Z,1513258537.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:37.939Z,1513258537.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:38.344Z,1513258538.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:38.537Z,1513258538.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:38.794Z,1513258538.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:38.941Z,1513258538.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:39.146Z,1513258539.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:39.591Z,1513258539.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:39.737Z,1513258539.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:39.944Z,1513258539.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:40.391Z,1513258540.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:40.534Z,1513258540.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:40.743Z,1513258540.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:40.939Z,1513258540.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:41.152Z,1513258541.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:41.548Z,1513258541.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:41.733Z,1513258541.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:41.948Z,1513258541.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:42.339Z,1513258542.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:42.532Z,1513258542.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:42.748Z,1513258542.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:42.941Z,1513258542.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:43.149Z,1513258543.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:43.584Z,1513258543.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:43.737Z,1513258543.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:43.951Z,1513258543.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:44.336Z,1513258544.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:44.536Z,1513258544.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:44.742Z,1513258544.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:44.946Z,1513258544.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:45.139Z,1513258545.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:45.553Z,1513258545.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:45.741Z,1513258545.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:45.954Z,1513258545.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:46.350Z,1513258546.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:46.537Z,1513258546.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:46.747Z,1513258546.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:46.941Z,1513258546.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:47.138Z,1513258547.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:47.550Z,1513258547.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:47.737Z,1513258547.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:47.941Z,1513258547.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:48.533Z,1513258548.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:48.938Z,1513258548.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:49.733Z,1513258549.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:50.531Z,1513258550.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:50.941Z,1513258550.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:51.515Z,1513258551.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:51.664Z,1513258551.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:51.737Z,1513258551.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:52.016Z,1513258552.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:52.415Z,1513258552.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:52.533Z,1513258552.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:52.815Z,1513258552.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:52.937Z,1513258552.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:53.242Z,1513258553.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:53.611Z,1513258553.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:53.735Z,1513258553.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:54.007Z,1513258554.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:54.419Z,1513258554.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:54.530Z,1513258554.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:54.819Z,1513258554.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:54.934Z,1513258554.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:55.212Z,1513258555.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:55.602Z,1513258555.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:55.730Z,1513258555.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:56.003Z,1513258556.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:56.448Z,1513258556.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:56.527Z,1513258556.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:56.808Z,1513258556.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:57.227Z,1513258557.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:57.322Z,1513258557.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:57.627Z,1513258557.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:57.729Z,1513258557.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:58.027Z,1513258558.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:58.408Z,1513258558.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:58.527Z,1513258558.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:58.811Z,1513258558.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:58.949Z,1513258558.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:35:59.212Z,1513258559.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:59.616Z,1513258559.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:35:59.747Z,1513258559.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:00.006Z,1513258560.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:00.418Z,1513258560.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:00.541Z,1513258560.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:00.823Z,1513258560.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:00.945Z,1513258560.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:01.223Z,1513258561.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:01.611Z,1513258561.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:01.741Z,1513258561.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:01.999Z,1513258561.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:02.421Z,1513258562.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:02.537Z,1513258562.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:02.799Z,1513258562.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:02.941Z,1513258562.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:03.239Z,1513258563.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:03.622Z,1513258563.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:03.737Z,1513258563.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:04.018Z,1513258564.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:04.418Z,1513258564.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:04.533Z,1513258564.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:04.812Z,1513258564.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:04.939Z,1513258564.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:05.218Z,1513258565.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:05.598Z,1513258565.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:05.733Z,1513258565.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:05.996Z,1513258565.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:06.463Z,1513258566.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:06.530Z,1513258566.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:06.810Z,1513258566.810 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:36:06.810Z,1513258566.810 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:36:06.810Z,1513258566.810 [BPC1](ERROR): Communications Fault
2017-12-14T13:36:06.823Z,1513258566.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:06.867Z,1513258566.867 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:36:06.941Z,1513258566.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:07.213Z,1513258567.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:07.607Z,1513258567.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:07.738Z,1513258567.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:08.011Z,1513258568.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:08.023Z,1513258568.023 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:36:08.024Z,1513258568.024 [BPC1] No Fault, FailCount= 1
2017-12-14T13:36:08.459Z,1513258568.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:08.533Z,1513258568.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:08.813Z,1513258568.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:08.937Z,1513258568.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:09.216Z,1513258569.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:09.644Z,1513258569.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:09.739Z,1513258569.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:10.015Z,1513258570.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:10.404Z,1513258570.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:10.535Z,1513258570.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:10.809Z,1513258570.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:10.945Z,1513258570.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:11.205Z,1513258571.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:11.605Z,1513258571.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:11.741Z,1513258571.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:12.104Z,1513258572.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:12.423Z,1513258572.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:12.539Z,1513258572.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:12.852Z,1513258572.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:12.950Z,1513258572.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:13.204Z,1513258573.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:13.603Z,1513258573.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:13.745Z,1513258573.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:14.005Z,1513258574.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:14.430Z,1513258574.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:14.542Z,1513258574.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:14.802Z,1513258574.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:14.945Z,1513258574.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:15.207Z,1513258575.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:15.616Z,1513258575.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:15.741Z,1513258575.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:16.054Z,1513258576.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:16.404Z,1513258576.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:16.537Z,1513258576.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:16.842Z,1513258576.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:16.941Z,1513258576.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:17.212Z,1513258577.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:17.612Z,1513258577.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:17.738Z,1513258577.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:18.013Z,1513258578.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:18.435Z,1513258578.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:18.534Z,1513258578.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:18.857Z,1513258578.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:18.937Z,1513258578.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:19.209Z,1513258579.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:19.612Z,1513258579.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:19.742Z,1513258579.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:20.045Z,1513258580.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:20.422Z,1513258580.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:20.538Z,1513258580.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:20.833Z,1513258580.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:20.944Z,1513258580.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:21.225Z,1513258581.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:21.637Z,1513258581.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:21.738Z,1513258581.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:22.023Z,1513258582.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:22.491Z,1513258582.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:22.535Z,1513258582.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:22.831Z,1513258582.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:22.942Z,1513258582.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:23.231Z,1513258583.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:23.627Z,1513258583.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:23.738Z,1513258583.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:24.008Z,1513258584.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:24.423Z,1513258584.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:24.535Z,1513258584.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:24.865Z,1513258584.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:24.961Z,1513258584.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:25.231Z,1513258585.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:25.615Z,1513258585.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:25.758Z,1513258585.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:26.040Z,1513258586.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:26.399Z,1513258586.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:26.558Z,1513258586.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:26.828Z,1513258586.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:26.965Z,1513258586.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:27.239Z,1513258587.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:27.632Z,1513258587.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:27.763Z,1513258587.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:28.052Z,1513258588.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:28.456Z,1513258588.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:28.557Z,1513258588.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:28.859Z,1513258588.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:28.961Z,1513258588.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:29.208Z,1513258589.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:29.596Z,1513258589.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:29.757Z,1513258589.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:30.066Z,1513258590.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:30.412Z,1513258590.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:30.554Z,1513258590.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:30.871Z,1513258590.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:30.957Z,1513258590.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:31.231Z,1513258591.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:31.638Z,1513258591.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:31.755Z,1513258591.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:32.034Z,1513258592.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:32.455Z,1513258592.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:32.550Z,1513258592.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:32.807Z,1513258592.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:32.954Z,1513258592.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:33.215Z,1513258593.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:33.639Z,1513258593.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:33.750Z,1513258593.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:34.054Z,1513258594.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:34.450Z,1513258594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:34.546Z,1513258594.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:34.811Z,1513258594.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:34.950Z,1513258594.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:35.260Z,1513258595.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:35.650Z,1513258595.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:35.746Z,1513258595.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:36.015Z,1513258596.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:36.449Z,1513258596.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:36.542Z,1513258596.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:36.847Z,1513258596.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:36.945Z,1513258596.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:37.222Z,1513258597.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:37.626Z,1513258597.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:37.742Z,1513258597.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:38.047Z,1513258598.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:38.403Z,1513258598.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:38.540Z,1513258598.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:38.848Z,1513258598.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:38.965Z,1513258598.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:39.266Z,1513258599.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:39.616Z,1513258599.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:39.762Z,1513258599.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:40.023Z,1513258600.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:40.470Z,1513258600.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:40.559Z,1513258600.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:40.819Z,1513258600.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:40.962Z,1513258600.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:41.226Z,1513258601.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:41.637Z,1513258601.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:41.757Z,1513258601.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:42.024Z,1513258602.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:42.433Z,1513258602.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:42.555Z,1513258602.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:42.846Z,1513258602.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:42.957Z,1513258602.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:43.228Z,1513258603.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:43.628Z,1513258603.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:43.753Z,1513258603.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:44.041Z,1513258604.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:44.428Z,1513258604.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:44.550Z,1513258604.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:44.834Z,1513258604.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:44.953Z,1513258604.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:45.250Z,1513258605.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:45.655Z,1513258605.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:45.750Z,1513258605.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:46.060Z,1513258606.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:46.432Z,1513258606.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:46.546Z,1513258606.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:46.847Z,1513258606.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:46.950Z,1513258606.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:47.227Z,1513258607.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:47.239Z,1513258607.239 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:36:47.239Z,1513258607.239 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:36:47.239Z,1513258607.239 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:36:47.239Z,1513258607.239 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:36:47.630Z,1513258607.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:47.641Z,1513258607.641 [Default:CheckIn:D] Stopped
2017-12-14T13:36:47.641Z,1513258607.641 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:36:47.745Z,1513258607.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:48.032Z,1513258608.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:48.040Z,1513258608.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 783.537500 min 
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn:E] Stopped
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn] Stopped
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn](INFO): Running loop #76
2017-12-14T13:36:48.045Z,1513258608.045 [Default:CheckIn] Running Loop=76
2017-12-14T13:36:48.046Z,1513258608.046 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:36:48.046Z,1513258608.046 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:36:48.542Z,1513258608.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:48.946Z,1513258608.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:49.741Z,1513258609.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:50.538Z,1513258610.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:50.941Z,1513258610.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:51.737Z,1513258611.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:52.056Z,1513258612.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:52.214Z,1513258612.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:52.534Z,1513258612.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:52.610Z,1513258612.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:52.961Z,1513258612.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:52.964Z,1513258612.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:53.324Z,1513258613.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:53.757Z,1513258613.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:53.760Z,1513258613.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:54.124Z,1513258614.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:54.124Z,1513258614.124 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 261
2017-12-14T13:36:54.124Z,1513258614.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:36:54.126Z,1513258614.126 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:54.126Z,1513258614.126 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 261
2017-12-14T13:36:54.127Z,1513258614.127 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:36:54.128Z,1513258614.128 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:54.129Z,1513258614.129 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 261
2017-12-14T13:36:54.129Z,1513258614.129 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:36:54.140Z,1513258614.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:36:54.140Z,1513258614.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:36:54.141Z,1513258614.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:36:54.555Z,1513258614.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:54.610Z,1513258614.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:36:54.610Z,1513258614.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 261
2017-12-14T13:36:54.610Z,1513258614.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:36:54.610Z,1513258614.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 261
2017-12-14T13:36:54.611Z,1513258614.611 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:36:54.611Z,1513258614.611 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 261
2017-12-14T13:36:54.959Z,1513258614.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:36:54.959Z,1513258614.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:36:54.959Z,1513258614.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:36:54.960Z,1513258614.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:36:54.960Z,1513258614.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:36:54.961Z,1513258614.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:36:54.961Z,1513258614.961 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:36:54.961Z,1513258614.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:36:54.962Z,1513258614.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:36:54.973Z,1513258614.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:55.329Z,1513258615.329 [PNI_TCM](ERROR): CRC does not match. Expected:0x4660 got:0x49152
2017-12-14T13:36:55.387Z,1513258615.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:55.722Z,1513258615.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:55.769Z,1513258615.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:56.143Z,1513258616.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:56.530Z,1513258616.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:56.565Z,1513258616.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:56.942Z,1513258616.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:56.969Z,1513258616.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:57.339Z,1513258617.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:57.758Z,1513258617.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:57.765Z,1513258617.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:58.139Z,1513258618.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:58.549Z,1513258618.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:58.561Z,1513258618.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:58.924Z,1513258618.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:58.965Z,1513258618.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:36:59.339Z,1513258619.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:59.719Z,1513258619.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:36:59.761Z,1513258619.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:00.129Z,1513258620.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:00.539Z,1513258620.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:00.557Z,1513258620.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:00.955Z,1513258620.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:00.961Z,1513258620.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:01.340Z,1513258621.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:01.743Z,1513258621.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:01.758Z,1513258621.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:02.222Z,1513258622.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:02.539Z,1513258622.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:02.553Z,1513258622.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:02.931Z,1513258622.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:02.957Z,1513258622.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:03.338Z,1513258623.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:03.743Z,1513258623.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:03.753Z,1513258623.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:04.151Z,1513258624.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:04.531Z,1513258624.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:04.549Z,1513258624.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:04.950Z,1513258624.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:04.953Z,1513258624.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:05.320Z,1513258625.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:05.744Z,1513258625.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:05.749Z,1513258625.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:06.118Z,1513258626.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:06.547Z,1513258626.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:06.591Z,1513258626.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:06.943Z,1513258626.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:06.973Z,1513258626.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:07.346Z,1513258627.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:07.717Z,1513258627.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:07.769Z,1513258627.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:08.127Z,1513258628.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:08.566Z,1513258628.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:08.618Z,1513258628.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:08.944Z,1513258628.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:08.969Z,1513258628.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:09.340Z,1513258629.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:09.739Z,1513258629.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:09.765Z,1513258629.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:10.143Z,1513258630.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:10.539Z,1513258630.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:10.561Z,1513258630.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:10.933Z,1513258630.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:10.965Z,1513258630.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:11.361Z,1513258631.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:11.726Z,1513258631.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:11.761Z,1513258631.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:12.128Z,1513258632.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:12.540Z,1513258632.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:12.557Z,1513258632.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:12.944Z,1513258632.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:13.343Z,1513258633.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:13.353Z,1513258633.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:13.743Z,1513258633.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:14.150Z,1513258634.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:14.215Z,1513258634.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:14.539Z,1513258634.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:14.945Z,1513258634.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:14.958Z,1513258634.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:15.350Z,1513258635.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:15.741Z,1513258635.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:15.771Z,1513258635.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:16.134Z,1513258636.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:16.522Z,1513258636.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:16.537Z,1513258636.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:17.005Z,1513258637.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:17.262Z,1513258637.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:17.370Z,1513258637.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:17.665Z,1513258637.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:17.747Z,1513258637.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:18.069Z,1513258638.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:18.117Z,1513258638.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x7094 got:0x16897
2017-12-14T13:37:18.166Z,1513258638.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:18.554Z,1513258638.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:18.665Z,1513258638.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:18.971Z,1513258638.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:19.350Z,1513258639.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:19.461Z,1513258639.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:19.731Z,1513258639.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:20.139Z,1513258640.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:20.258Z,1513258640.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:20.650Z,1513258640.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:20.944Z,1513258640.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:20.993Z,1513258640.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:21.324Z,1513258641.324 [PNI_TCM](ERROR): CRC does not match. Expected:0x63473 got:0x39552
2017-12-14T13:37:21.355Z,1513258641.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:21.762Z,1513258641.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:21.789Z,1513258641.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:22.149Z,1513258642.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:22.585Z,1513258642.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:22.621Z,1513258642.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:22.949Z,1513258642.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:22.990Z,1513258642.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:23.358Z,1513258643.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:23.736Z,1513258643.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:23.785Z,1513258643.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:24.220Z,1513258644.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:24.543Z,1513258644.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:24.581Z,1513258644.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:24.967Z,1513258644.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:24.985Z,1513258644.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:25.343Z,1513258645.343 [PNI_TCM](ERROR): CRC does not match. Expected:0x5792 got:0x53218
2017-12-14T13:37:25.364Z,1513258645.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:25.781Z,1513258645.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:25.829Z,1513258645.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:26.114Z,1513258646.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x57583 got:0x48097
2017-12-14T13:37:26.144Z,1513258646.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:26.552Z,1513258646.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:26.601Z,1513258646.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:26.960Z,1513258646.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:27.005Z,1513258647.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:27.360Z,1513258647.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:27.755Z,1513258647.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:27.801Z,1513258647.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:28.219Z,1513258648.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:28.531Z,1513258648.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:28.597Z,1513258648.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:28.952Z,1513258648.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:29.001Z,1513258649.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:29.327Z,1513258649.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:29.797Z,1513258649.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:29.806Z,1513258649.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:30.253Z,1513258650.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:30.554Z,1513258650.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:30.593Z,1513258650.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:30.943Z,1513258650.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:31.146Z,1513258651.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:31.357Z,1513258651.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:31.748Z,1513258651.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:31.941Z,1513258651.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:32.146Z,1513258652.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:32.555Z,1513258652.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:32.653Z,1513258652.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:32.958Z,1513258652.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:33.360Z,1513258653.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:33.449Z,1513258653.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:33.794Z,1513258653.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:34.155Z,1513258654.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:34.245Z,1513258654.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:34.591Z,1513258654.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:34.940Z,1513258654.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:34.977Z,1513258654.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:35.332Z,1513258655.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:35.739Z,1513258655.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:35.773Z,1513258655.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:36.176Z,1513258656.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:36.570Z,1513258656.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:36.643Z,1513258656.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:36.981Z,1513258656.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:36.990Z,1513258656.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:37.345Z,1513258657.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:37.763Z,1513258657.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:37.777Z,1513258657.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:38.143Z,1513258658.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:38.571Z,1513258658.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:38.574Z,1513258658.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:38.955Z,1513258658.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:38.977Z,1513258658.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:39.359Z,1513258659.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:39.735Z,1513258659.735 [PNI_TCM](ERROR): CRC does not match. Expected:0x60929 got:0x48959
2017-12-14T13:37:39.767Z,1513258659.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:39.773Z,1513258659.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:40.253Z,1513258660.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:40.544Z,1513258660.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:40.569Z,1513258660.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:40.955Z,1513258660.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:40.973Z,1513258660.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:41.336Z,1513258661.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:41.739Z,1513258661.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:41.769Z,1513258661.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:42.210Z,1513258662.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:42.552Z,1513258662.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:42.566Z,1513258662.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:42.969Z,1513258662.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:42.987Z,1513258662.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:43.359Z,1513258663.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:43.743Z,1513258663.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:43.765Z,1513258663.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:44.145Z,1513258664.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:44.545Z,1513258664.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:44.561Z,1513258664.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:44.953Z,1513258664.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:44.965Z,1513258664.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:45.354Z,1513258665.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:45.758Z,1513258665.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:45.761Z,1513258665.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:46.154Z,1513258666.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:46.557Z,1513258666.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:46.623Z,1513258666.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:46.938Z,1513258666.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:46.961Z,1513258666.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:47.348Z,1513258667.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:47.740Z,1513258667.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:47.757Z,1513258667.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:48.192Z,1513258668.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:48.555Z,1513258668.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:48.973Z,1513258668.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:49.771Z,1513258669.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:50.567Z,1513258670.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:50.973Z,1513258670.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:51.634Z,1513258671.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:51.765Z,1513258671.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:51.777Z,1513258671.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:52.142Z,1513258672.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:52.515Z,1513258672.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:52.573Z,1513258672.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:52.963Z,1513258672.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:52.978Z,1513258672.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:53.327Z,1513258673.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:53.714Z,1513258673.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:53.773Z,1513258673.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:54.117Z,1513258674.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:54.528Z,1513258674.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:54.570Z,1513258674.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:54.938Z,1513258674.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:54.973Z,1513258674.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:55.343Z,1513258675.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:55.715Z,1513258675.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:55.769Z,1513258675.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:56.224Z,1513258676.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:56.524Z,1513258676.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:56.565Z,1513258676.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:56.911Z,1513258676.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:56.969Z,1513258676.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:57.325Z,1513258677.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:57.727Z,1513258677.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:57.765Z,1513258677.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:58.148Z,1513258678.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:58.561Z,1513258678.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:58.602Z,1513258678.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:58.913Z,1513258678.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:58.965Z,1513258678.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:37:59.335Z,1513258679.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:59.736Z,1513258679.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:37:59.761Z,1513258679.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:00.147Z,1513258680.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:00.532Z,1513258680.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:00.561Z,1513258680.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:00.936Z,1513258680.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:00.965Z,1513258680.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:01.328Z,1513258681.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:01.737Z,1513258681.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:01.761Z,1513258681.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:02.106Z,1513258682.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:02.559Z,1513258682.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:02.617Z,1513258682.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:02.932Z,1513258682.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:02.977Z,1513258682.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:03.312Z,1513258683.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:03.712Z,1513258683.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:03.773Z,1513258683.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:04.119Z,1513258684.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:04.570Z,1513258684.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:04.591Z,1513258684.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:04.942Z,1513258684.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:04.985Z,1513258684.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:05.309Z,1513258685.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:05.710Z,1513258685.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:05.782Z,1513258685.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:06.126Z,1513258686.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:06.525Z,1513258686.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:06.577Z,1513258686.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:06.931Z,1513258686.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:06.981Z,1513258686.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:07.308Z,1513258687.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:07.723Z,1513258687.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:07.777Z,1513258687.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:08.124Z,1513258688.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:08.551Z,1513258688.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:08.574Z,1513258688.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:08.977Z,1513258688.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:08.982Z,1513258688.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:09.331Z,1513258689.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:09.742Z,1513258689.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:09.774Z,1513258689.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:10.135Z,1513258690.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:10.506Z,1513258690.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:10.570Z,1513258690.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:10.913Z,1513258690.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:10.973Z,1513258690.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:11.305Z,1513258691.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:11.708Z,1513258691.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:11.770Z,1513258691.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:12.220Z,1513258692.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:12.527Z,1513258692.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:12.565Z,1513258692.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:12.944Z,1513258692.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:12.969Z,1513258692.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:13.316Z,1513258693.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:13.723Z,1513258693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:13.765Z,1513258693.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:14.103Z,1513258694.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:14.507Z,1513258694.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:14.561Z,1513258694.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:14.908Z,1513258694.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:14.965Z,1513258694.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:15.329Z,1513258695.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:15.738Z,1513258695.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:15.761Z,1513258695.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:16.143Z,1513258696.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:16.558Z,1513258696.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:16.590Z,1513258696.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:16.927Z,1513258696.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:16.969Z,1513258696.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:17.320Z,1513258697.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:17.728Z,1513258697.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:17.765Z,1513258697.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:18.115Z,1513258698.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:18.562Z,1513258698.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:18.613Z,1513258698.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:18.935Z,1513258698.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:18.981Z,1513258698.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:19.347Z,1513258699.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:19.710Z,1513258699.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:19.777Z,1513258699.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:20.127Z,1513258700.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:20.573Z,1513258700.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:20.582Z,1513258700.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:20.923Z,1513258700.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:20.977Z,1513258700.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:21.347Z,1513258701.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:21.773Z,1513258701.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:21.764Z,1513258701.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:22.137Z,1513258702.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:22.544Z,1513258702.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:22.577Z,1513258702.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:22.915Z,1513258702.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:22.981Z,1513258702.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:23.319Z,1513258703.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:23.722Z,1513258703.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:23.778Z,1513258703.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:24.128Z,1513258704.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:24.532Z,1513258704.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:24.573Z,1513258704.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:24.928Z,1513258704.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:24.977Z,1513258704.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:25.324Z,1513258705.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:25.708Z,1513258705.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:25.775Z,1513258705.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:26.099Z,1513258706.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:26.512Z,1513258706.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:26.570Z,1513258706.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:26.922Z,1513258706.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:26.973Z,1513258706.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:27.320Z,1513258707.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:27.719Z,1513258707.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:27.769Z,1513258707.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:28.160Z,1513258708.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:28.528Z,1513258708.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:28.573Z,1513258708.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:28.907Z,1513258708.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:28.977Z,1513258708.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:29.310Z,1513258709.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:29.709Z,1513258709.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:29.773Z,1513258709.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:30.115Z,1513258710.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:30.570Z,1513258710.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:30.612Z,1513258710.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:30.942Z,1513258710.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:30.973Z,1513258710.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:31.320Z,1513258711.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:31.719Z,1513258711.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:31.769Z,1513258711.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:32.108Z,1513258712.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:32.565Z,1513258712.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:32.575Z,1513258712.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:32.923Z,1513258712.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:33.332Z,1513258713.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:33.361Z,1513258713.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:33.726Z,1513258713.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:33.766Z,1513258713.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:34.134Z,1513258714.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:34.559Z,1513258714.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:34.561Z,1513258714.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:34.923Z,1513258714.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:34.965Z,1513258714.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:35.304Z,1513258715.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:35.704Z,1513258715.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:35.761Z,1513258715.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:36.106Z,1513258716.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:36.522Z,1513258716.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:36.573Z,1513258716.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:36.954Z,1513258716.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:36.977Z,1513258716.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:37.330Z,1513258717.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:37.750Z,1513258717.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:37.773Z,1513258717.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:38.125Z,1513258718.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:38.527Z,1513258718.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:38.570Z,1513258718.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:38.931Z,1513258718.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:38.973Z,1513258718.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:39.332Z,1513258719.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:39.739Z,1513258719.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:39.769Z,1513258719.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:40.144Z,1513258720.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:40.507Z,1513258720.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:40.565Z,1513258720.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:40.954Z,1513258720.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:40.969Z,1513258720.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:41.327Z,1513258721.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:41.723Z,1513258721.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:41.765Z,1513258721.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:42.118Z,1513258722.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:42.525Z,1513258722.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:42.561Z,1513258722.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:42.965Z,1513258722.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:43.009Z,1513258723.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:43.343Z,1513258723.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:43.721Z,1513258723.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:43.761Z,1513258723.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:44.174Z,1513258724.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:44.559Z,1513258724.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:44.588Z,1513258724.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:44.954Z,1513258724.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:44.973Z,1513258724.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:45.337Z,1513258725.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:45.710Z,1513258725.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:45.770Z,1513258725.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:46.141Z,1513258726.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:46.566Z,1513258726.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:46.592Z,1513258726.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:46.940Z,1513258726.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:46.969Z,1513258726.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:47.327Z,1513258727.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:47.716Z,1513258727.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:47.765Z,1513258727.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:48.109Z,1513258728.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:48.532Z,1513258728.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:48.561Z,1513258728.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:48.965Z,1513258728.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:49.761Z,1513258729.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:50.570Z,1513258730.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:50.973Z,1513258730.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:51.769Z,1513258731.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:51.918Z,1513258731.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:52.061Z,1513258732.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:52.413Z,1513258732.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:52.565Z,1513258732.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:52.822Z,1513258732.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:52.969Z,1513258732.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:53.224Z,1513258733.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:53.594Z,1513258733.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:53.766Z,1513258733.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:54.017Z,1513258734.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:54.417Z,1513258734.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:54.561Z,1513258734.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:54.827Z,1513258734.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:54.965Z,1513258734.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:55.220Z,1513258735.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:55.592Z,1513258735.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:55.761Z,1513258735.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:55.991Z,1513258735.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:56.399Z,1513258736.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:56.557Z,1513258736.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:56.792Z,1513258736.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:56.962Z,1513258736.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:57.218Z,1513258737.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:57.622Z,1513258737.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:57.757Z,1513258737.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:58.020Z,1513258738.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:58.391Z,1513258738.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:58.562Z,1513258738.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:58.799Z,1513258738.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:58.965Z,1513258738.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:59.191Z,1513258739.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:59.591Z,1513258739.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:38:59.761Z,1513258739.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:38:59.992Z,1513258739.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:00.411Z,1513258740.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:00.559Z,1513258740.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:00.811Z,1513258740.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:00.961Z,1513258740.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:01.205Z,1513258741.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:01.597Z,1513258741.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:01.757Z,1513258741.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:01.999Z,1513258741.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:02.400Z,1513258742.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:02.553Z,1513258742.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:02.807Z,1513258742.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:02.958Z,1513258742.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:03.235Z,1513258743.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:03.619Z,1513258743.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:03.753Z,1513258743.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:04.011Z,1513258744.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:04.400Z,1513258744.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:04.549Z,1513258744.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:04.843Z,1513258744.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:04.953Z,1513258744.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:05.247Z,1513258745.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:05.608Z,1513258745.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:05.750Z,1513258745.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:06.048Z,1513258746.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:06.424Z,1513258746.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:06.546Z,1513258746.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:06.858Z,1513258746.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:06.949Z,1513258746.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:07.206Z,1513258747.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:07.607Z,1513258747.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:07.745Z,1513258747.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:07.980Z,1513258747.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:08.419Z,1513258748.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:08.541Z,1513258748.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:08.822Z,1513258748.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:08.945Z,1513258748.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:09.210Z,1513258749.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:09.662Z,1513258749.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:09.741Z,1513258749.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:09.989Z,1513258749.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:10.392Z,1513258750.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:10.538Z,1513258750.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:10.791Z,1513258750.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:10.941Z,1513258750.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:11.216Z,1513258751.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:11.619Z,1513258751.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:11.737Z,1513258751.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:12.018Z,1513258752.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:12.390Z,1513258752.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:12.535Z,1513258752.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:12.822Z,1513258752.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:12.941Z,1513258752.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:13.196Z,1513258753.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:13.591Z,1513258753.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:13.738Z,1513258753.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:13.991Z,1513258753.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:14.421Z,1513258754.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:14.535Z,1513258754.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:14.820Z,1513258754.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:14.941Z,1513258754.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:15.239Z,1513258755.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:15.592Z,1513258755.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:15.737Z,1513258755.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:16.030Z,1513258756.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:16.398Z,1513258756.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:16.533Z,1513258756.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:16.793Z,1513258756.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:16.938Z,1513258756.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:17.220Z,1513258757.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:17.619Z,1513258757.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:17.733Z,1513258757.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:18.019Z,1513258758.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:18.395Z,1513258758.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:18.531Z,1513258758.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:18.797Z,1513258758.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:18.941Z,1513258758.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:19.199Z,1513258759.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:19.596Z,1513258759.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:19.618Z,1513258759.618 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:39:19.737Z,1513258759.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:19.997Z,1513258759.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:20.428Z,1513258760.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:20.533Z,1513258760.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:20.828Z,1513258760.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:20.937Z,1513258760.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:21.203Z,1513258761.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:21.603Z,1513258761.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:21.734Z,1513258761.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:22.089Z,1513258762.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:22.454Z,1513258762.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:22.529Z,1513258762.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:22.802Z,1513258762.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:22.933Z,1513258762.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:23.201Z,1513258763.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:23.607Z,1513258763.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:23.729Z,1513258763.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:24.004Z,1513258764.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:24.403Z,1513258764.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:24.525Z,1513258764.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:24.801Z,1513258764.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:24.931Z,1513258764.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:25.202Z,1513258765.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:25.626Z,1513258765.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:25.726Z,1513258765.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:26.011Z,1513258766.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:26.405Z,1513258766.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:26.523Z,1513258766.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:26.858Z,1513258766.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:26.945Z,1513258766.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:27.262Z,1513258767.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:27.600Z,1513258767.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:27.741Z,1513258767.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:28.040Z,1513258768.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:28.400Z,1513258768.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:28.539Z,1513258768.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:28.851Z,1513258768.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:28.946Z,1513258768.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:29.216Z,1513258769.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:29.619Z,1513258769.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:29.741Z,1513258769.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:30.011Z,1513258770.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:30.398Z,1513258770.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:30.537Z,1513258770.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:30.804Z,1513258770.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:30.941Z,1513258770.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:31.202Z,1513258771.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:31.602Z,1513258771.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:31.737Z,1513258771.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:32.055Z,1513258772.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:32.406Z,1513258772.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:32.533Z,1513258772.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:32.819Z,1513258772.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:32.938Z,1513258772.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:33.210Z,1513258773.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:33.599Z,1513258773.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:33.733Z,1513258773.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:34.007Z,1513258774.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:34.411Z,1513258774.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:34.535Z,1513258774.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:34.803Z,1513258774.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:35.089Z,1513258775.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:35.211Z,1513258775.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:35.619Z,1513258775.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:35.885Z,1513258775.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:36.012Z,1513258776.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:36.408Z,1513258776.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:36.592Z,1513258776.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:36.807Z,1513258776.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:37.224Z,1513258777.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:37.385Z,1513258777.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:37.605Z,1513258777.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:38.005Z,1513258778.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:38.181Z,1513258778.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:38.464Z,1513258778.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:38.637Z,1513258778.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:38.815Z,1513258778.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:39.215Z,1513258779.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:39.433Z,1513258779.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:39.594Z,1513258779.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:39.991Z,1513258779.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:40.229Z,1513258780.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:40.395Z,1513258780.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:40.805Z,1513258780.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:40.931Z,1513258780.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:41.215Z,1513258781.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:41.648Z,1513258781.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:41.726Z,1513258781.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:42.023Z,1513258782.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:42.423Z,1513258782.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:42.524Z,1513258782.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:42.803Z,1513258782.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:42.953Z,1513258782.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:43.222Z,1513258783.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:43.610Z,1513258783.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:43.749Z,1513258783.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:44.020Z,1513258784.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:44.415Z,1513258784.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:44.545Z,1513258784.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:44.830Z,1513258784.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:44.950Z,1513258784.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:45.212Z,1513258785.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:45.616Z,1513258785.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:45.747Z,1513258785.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:45.992Z,1513258785.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:46.415Z,1513258786.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:46.541Z,1513258786.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:46.812Z,1513258786.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:46.945Z,1513258786.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:47.211Z,1513258787.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:47.619Z,1513258787.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:47.741Z,1513258787.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:48.035Z,1513258788.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:48.399Z,1513258788.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:48.537Z,1513258788.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:48.804Z,1513258788.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:48.941Z,1513258788.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:49.738Z,1513258789.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:50.535Z,1513258790.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:50.941Z,1513258790.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:51.737Z,1513258791.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:52.345Z,1513258792.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:52.499Z,1513258792.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:52.534Z,1513258792.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:52.852Z,1513258792.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:52.937Z,1513258792.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:53.259Z,1513258793.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:53.686Z,1513258793.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:53.735Z,1513258793.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:54.047Z,1513258794.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:54.530Z,1513258794.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:54.589Z,1513258794.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:54.854Z,1513258794.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:54.965Z,1513258794.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:55.251Z,1513258795.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:55.251Z,1513258795.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 262
2017-12-14T13:39:55.251Z,1513258795.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:39:55.253Z,1513258795.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:55.253Z,1513258795.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 262
2017-12-14T13:39:55.253Z,1513258795.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:39:55.255Z,1513258795.255 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:55.255Z,1513258795.255 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 262
2017-12-14T13:39:55.255Z,1513258795.255 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:39:55.267Z,1513258795.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:39:55.267Z,1513258795.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:39:55.267Z,1513258795.267 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:39:55.672Z,1513258795.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:39:55.672Z,1513258795.672 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 262
2017-12-14T13:39:55.673Z,1513258795.673 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:39:55.673Z,1513258795.673 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 262
2017-12-14T13:39:55.673Z,1513258795.673 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:39:55.673Z,1513258795.673 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 262
2017-12-14T13:39:55.761Z,1513258795.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:56.058Z,1513258796.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:39:56.059Z,1513258796.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:39:56.059Z,1513258796.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:39:56.059Z,1513258796.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:39:56.060Z,1513258796.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:39:56.060Z,1513258796.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:39:56.060Z,1513258796.060 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:39:56.061Z,1513258796.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:39:56.061Z,1513258796.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:39:56.445Z,1513258796.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:56.558Z,1513258796.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:56.851Z,1513258796.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:56.964Z,1513258796.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:57.245Z,1513258797.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:57.647Z,1513258797.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:57.758Z,1513258797.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:58.044Z,1513258798.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:58.451Z,1513258798.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:58.553Z,1513258798.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:58.850Z,1513258798.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:58.958Z,1513258798.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:39:59.253Z,1513258799.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:59.645Z,1513258799.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:39:59.753Z,1513258799.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:00.047Z,1513258800.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:00.452Z,1513258800.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:00.549Z,1513258800.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:00.895Z,1513258800.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:00.953Z,1513258800.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:01.257Z,1513258801.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:01.656Z,1513258801.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:01.749Z,1513258801.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:02.054Z,1513258802.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:02.451Z,1513258802.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:02.545Z,1513258802.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:02.873Z,1513258802.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:02.949Z,1513258802.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:03.255Z,1513258803.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:03.647Z,1513258803.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:03.745Z,1513258803.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:04.068Z,1513258804.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:04.459Z,1513258804.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:04.541Z,1513258804.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:04.872Z,1513258804.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:04.945Z,1513258804.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:05.265Z,1513258805.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:05.660Z,1513258805.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:05.741Z,1513258805.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:06.051Z,1513258806.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:06.459Z,1513258806.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:06.538Z,1513258806.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:06.847Z,1513258806.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:06.941Z,1513258806.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:07.253Z,1513258807.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:07.662Z,1513258807.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:07.737Z,1513258807.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:08.055Z,1513258808.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:08.447Z,1513258808.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:08.535Z,1513258808.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:08.869Z,1513258808.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:09.197Z,1513258809.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:09.254Z,1513258809.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:09.650Z,1513258809.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:09.994Z,1513258809.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:10.051Z,1513258810.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:10.475Z,1513258810.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:10.815Z,1513258810.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:10.882Z,1513258810.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:11.217Z,1513258811.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:11.271Z,1513258811.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:11.658Z,1513258811.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:12.016Z,1513258812.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:12.043Z,1513258812.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:12.466Z,1513258812.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:12.593Z,1513258812.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:12.863Z,1513258812.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:13.336Z,1513258813.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:13.389Z,1513258813.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:13.688Z,1513258813.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:14.066Z,1513258814.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:14.187Z,1513258814.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:14.443Z,1513258814.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:14.599Z,1513258814.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:14.890Z,1513258814.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:15.248Z,1513258815.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:15.393Z,1513258815.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:15.642Z,1513258815.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:16.067Z,1513258816.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:16.191Z,1513258816.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:16.471Z,1513258816.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:16.597Z,1513258816.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:16.899Z,1513258816.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:17.255Z,1513258817.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:17.393Z,1513258817.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:17.647Z,1513258817.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:18.043Z,1513258818.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:18.192Z,1513258818.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:18.447Z,1513258818.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:18.608Z,1513258818.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:18.845Z,1513258818.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:19.256Z,1513258819.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:19.402Z,1513258819.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:19.676Z,1513258819.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:20.090Z,1513258820.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:20.200Z,1513258820.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:20.444Z,1513258820.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:20.669Z,1513258820.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:20.834Z,1513258820.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:21.240Z,1513258821.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:21.465Z,1513258821.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:21.642Z,1513258821.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:22.035Z,1513258822.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:22.262Z,1513258822.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:22.461Z,1513258822.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:22.867Z,1513258822.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:22.961Z,1513258822.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:23.276Z,1513258823.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:23.650Z,1513258823.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:23.757Z,1513258823.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:24.042Z,1513258824.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:24.446Z,1513258824.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:24.553Z,1513258824.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:24.849Z,1513258824.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:24.957Z,1513258824.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:25.292Z,1513258825.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:25.661Z,1513258825.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:26.063Z,1513258826.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:26.495Z,1513258826.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:26.892Z,1513258826.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:27.248Z,1513258827.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:27.649Z,1513258827.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:28.049Z,1513258828.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:28.458Z,1513258828.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:28.859Z,1513258828.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:29.257Z,1513258829.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:29.675Z,1513258829.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:30.052Z,1513258830.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:30.455Z,1513258830.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:30.846Z,1513258830.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:31.260Z,1513258831.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:31.664Z,1513258831.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:32.063Z,1513258832.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:32.456Z,1513258832.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:32.904Z,1513258832.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:33.255Z,1513258833.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:33.659Z,1513258833.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:34.041Z,1513258834.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:34.468Z,1513258834.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:34.875Z,1513258834.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:35.275Z,1513258835.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:35.641Z,1513258835.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:35.766Z,1513258835.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:36.126Z,1513258836.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:36.454Z,1513258836.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:36.562Z,1513258836.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:36.883Z,1513258836.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:36.965Z,1513258836.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:40:37.265Z,1513258837.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:37.683Z,1513258837.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:38.064Z,1513258838.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:38.555Z,1513258838.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:38.844Z,1513258838.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:39.286Z,1513258839.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:39.652Z,1513258839.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:40.045Z,1513258840.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:40.461Z,1513258840.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:40.853Z,1513258840.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:41.253Z,1513258841.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:41.643Z,1513258841.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:42.044Z,1513258842.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:42.496Z,1513258842.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:42.848Z,1513258842.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:43.314Z,1513258843.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:43.656Z,1513258843.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:44.055Z,1513258844.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:44.455Z,1513258844.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:44.852Z,1513258844.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:45.247Z,1513258845.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:45.690Z,1513258845.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:46.051Z,1513258846.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:46.456Z,1513258846.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:46.894Z,1513258846.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:47.256Z,1513258847.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:47.655Z,1513258847.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:48.055Z,1513258848.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:48.455Z,1513258848.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:48.872Z,1513258848.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:52.185Z,1513258852.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:52.362Z,1513258852.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:52.727Z,1513258852.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:53.130Z,1513258853.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:53.523Z,1513258853.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:53.927Z,1513258853.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:54.339Z,1513258854.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:54.731Z,1513258854.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:55.176Z,1513258855.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:55.511Z,1513258855.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:55.903Z,1513258855.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:56.306Z,1513258856.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:56.708Z,1513258856.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:57.108Z,1513258857.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:57.515Z,1513258857.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:57.963Z,1513258857.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:58.316Z,1513258858.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:58.711Z,1513258858.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:59.148Z,1513258859.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:59.514Z,1513258859.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:40:59.910Z,1513258859.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:00.351Z,1513258860.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:00.716Z,1513258860.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:01.163Z,1513258861.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:01.512Z,1513258861.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:01.912Z,1513258861.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:02.324Z,1513258862.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:02.711Z,1513258862.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:03.112Z,1513258863.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:03.520Z,1513258863.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:03.922Z,1513258863.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:04.322Z,1513258864.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:04.774Z,1513258864.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:05.121Z,1513258865.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:05.512Z,1513258865.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:05.976Z,1513258865.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:06.319Z,1513258866.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:06.726Z,1513258866.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:07.124Z,1513258867.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:07.511Z,1513258867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:07.926Z,1513258867.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:08.311Z,1513258868.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:08.716Z,1513258868.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:09.118Z,1513258869.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:09.559Z,1513258869.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:09.920Z,1513258869.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:10.323Z,1513258870.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:10.719Z,1513258870.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:11.154Z,1513258871.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:11.514Z,1513258871.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:11.913Z,1513258871.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:12.332Z,1513258872.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:12.728Z,1513258872.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:13.120Z,1513258873.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:13.504Z,1513258873.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:13.907Z,1513258873.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:14.341Z,1513258874.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:14.714Z,1513258874.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:15.120Z,1513258875.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:15.515Z,1513258875.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:15.916Z,1513258875.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:16.348Z,1513258876.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:16.714Z,1513258876.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:17.119Z,1513258877.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:17.576Z,1513258877.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:17.920Z,1513258877.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:18.320Z,1513258878.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:18.715Z,1513258878.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:19.115Z,1513258879.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:19.519Z,1513258879.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:19.741Z,1513258879.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:19.909Z,1513258879.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:20.363Z,1513258880.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:20.539Z,1513258880.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:20.730Z,1513258880.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:20.957Z,1513258880.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:21.117Z,1513258881.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:21.536Z,1513258881.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:21.754Z,1513258881.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:21.926Z,1513258881.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:22.335Z,1513258882.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:22.549Z,1513258882.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:22.714Z,1513258882.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:22.955Z,1513258882.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:23.135Z,1513258883.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:23.524Z,1513258883.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:23.951Z,1513258883.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:24.331Z,1513258884.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:24.699Z,1513258884.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:25.107Z,1513258885.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:25.507Z,1513258885.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:25.898Z,1513258885.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:26.330Z,1513258886.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:26.732Z,1513258886.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:27.181Z,1513258887.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:27.533Z,1513258887.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:27.912Z,1513258887.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:28.370Z,1513258888.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:28.734Z,1513258888.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:29.132Z,1513258889.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:29.533Z,1513258889.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:29.947Z,1513258889.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:30.403Z,1513258890.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:30.736Z,1513258890.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:31.112Z,1513258891.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:31.556Z,1513258891.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:31.919Z,1513258891.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:32.323Z,1513258892.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:32.751Z,1513258892.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:33.119Z,1513258893.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:33.515Z,1513258893.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:33.762Z,1513258893.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:33.909Z,1513258893.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:34.302Z,1513258894.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:34.558Z,1513258894.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:34.699Z,1513258894.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:34.961Z,1513258894.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:35.139Z,1513258895.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:35.546Z,1513258895.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:35.959Z,1513258895.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:36.319Z,1513258896.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:36.714Z,1513258896.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:37.113Z,1513258897.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:37.527Z,1513258897.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:37.924Z,1513258897.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:38.347Z,1513258898.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:38.770Z,1513258898.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:39.161Z,1513258899.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:39.546Z,1513258899.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:39.904Z,1513258899.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:40.308Z,1513258900.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:40.765Z,1513258900.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:41.149Z,1513258901.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:41.536Z,1513258901.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:41.943Z,1513258901.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:42.340Z,1513258902.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:42.707Z,1513258902.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:43.169Z,1513258903.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:43.550Z,1513258903.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:43.967Z,1513258903.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:44.387Z,1513258904.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:44.775Z,1513258904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:45.120Z,1513258905.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:45.567Z,1513258905.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:45.971Z,1513258905.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:46.325Z,1513258906.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:46.720Z,1513258906.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:47.136Z,1513258907.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:47.516Z,1513258907.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:47.759Z,1513258907.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:47.927Z,1513258907.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:48.351Z,1513258908.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:48.355Z,1513258908.355 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:36:48.0Z
2017-12-14T13:41:48.355Z,1513258908.355 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:41:48.355Z,1513258908.355 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:41:48.555Z,1513258908.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:48.740Z,1513258908.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:48.964Z,1513258908.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:41:50.144Z,1513258910.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:56.767Z,1513258916.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:56.831Z,1513258916.831 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0304.lzma
2017-12-14T13:41:56.939Z,1513258916.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:57.332Z,1513258917.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:41:57.608Z,1513258917.608 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0304.lzma.bak
2017-12-14T13:41:57.608Z,1513258917.608 [DataOverHttps](INFO): SBD MOMSN=5438863
2017-12-14T13:41:57.688Z,1513258917.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:01.762Z,1513258921.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:02.558Z,1513258922.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:02.961Z,1513258922.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:03.757Z,1513258923.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:04.553Z,1513258924.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:04.957Z,1513258924.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:15.737Z,1513258935.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:16.535Z,1513258936.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:16.941Z,1513258936.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:17.738Z,1513258937.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:18.533Z,1513258938.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:18.937Z,1513258938.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:42:25.633Z,1513258945.633 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:42:25.633Z,1513258945.633 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:42:25.633Z,1513258945.633 [BPC1](ERROR): Communications Fault
2017-12-14T13:42:25.651Z,1513258945.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:25.676Z,1513258945.676 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:42:25.777Z,1513258945.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:29.553Z,1513258949.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:29.791Z,1513258949.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:29.811Z,1513258949.811 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:42:29.812Z,1513258949.812 [BPC1] No Fault, FailCount= 1
2017-12-14T13:42:30.115Z,1513258950.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:30.455Z,1513258950.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:30.863Z,1513258950.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:31.254Z,1513258951.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:34.821Z,1513258954.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:34.901Z,1513258954.901 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0305.lzma
2017-12-14T13:42:34.940Z,1513258954.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:35.389Z,1513258955.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:35.652Z,1513258955.652 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0305.lzma.bak
2017-12-14T13:42:35.652Z,1513258955.652 [DataOverHttps](INFO): SBD MOMSN=5438865
2017-12-14T13:42:35.742Z,1513258955.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:36.923Z,1513258956.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:36.929Z,1513258956.929 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:42:36.929Z,1513258956.929 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:42:36.930Z,1513258956.930 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:42:37.047Z,1513258957.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:40.626Z,1513258960.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:40.762Z,1513258960.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:41.127Z,1513258961.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:41.522Z,1513258961.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:41.927Z,1513258961.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:42.294Z,1513258962.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:42.717Z,1513258962.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:43.098Z,1513258963.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:43.524Z,1513258963.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:43.908Z,1513258963.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:44.325Z,1513258964.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:44.700Z,1513258964.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:45.102Z,1513258965.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:45.501Z,1513258965.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:45.907Z,1513258965.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:46.312Z,1513258966.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:46.712Z,1513258966.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:47.110Z,1513258967.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:47.503Z,1513258967.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:47.940Z,1513258967.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:48.316Z,1513258968.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:48.722Z,1513258968.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:49.119Z,1513258969.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:49.507Z,1513258969.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:49.908Z,1513258969.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:50.319Z,1513258970.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:50.711Z,1513258970.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:51.164Z,1513258971.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:51.517Z,1513258971.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:51.866Z,1513258971.866 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T13:42:51.866Z,1513258971.866 [NAL9602] Data Fault, FailCount= 2
2017-12-14T13:42:51.866Z,1513258971.866 [NAL9602](ERROR): Data Fault
2017-12-14T13:42:51.924Z,1513258971.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:51.938Z,1513258971.938 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T13:42:52.262Z,1513258972.262 [NAL9602](INFO): Powering down
2017-12-14T13:42:52.323Z,1513258972.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:52.759Z,1513258972.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:53.106Z,1513258973.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:53.119Z,1513258973.119 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T13:42:53.119Z,1513258973.119 [NAL9602] No Fault, FailCount= 2
2017-12-14T13:42:53.531Z,1513258973.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:53.908Z,1513258973.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:54.418Z,1513258974.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:54.716Z,1513258974.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:55.105Z,1513258975.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:55.504Z,1513258975.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:55.903Z,1513258975.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:56.304Z,1513258976.304 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:56.304Z,1513258976.304 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 263
2017-12-14T13:42:56.304Z,1513258976.304 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:42:56.306Z,1513258976.306 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:56.306Z,1513258976.306 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 263
2017-12-14T13:42:56.306Z,1513258976.306 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:42:56.308Z,1513258976.308 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:56.308Z,1513258976.308 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 263
2017-12-14T13:42:56.308Z,1513258976.308 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:42:56.320Z,1513258976.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:42:56.320Z,1513258976.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:42:56.320Z,1513258976.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:42:56.711Z,1513258976.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:42:56.711Z,1513258976.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 263
2017-12-14T13:42:56.712Z,1513258976.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:42:56.712Z,1513258976.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 263
2017-12-14T13:42:56.712Z,1513258976.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:42:56.712Z,1513258976.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 263
2017-12-14T13:42:57.106Z,1513258977.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:42:57.106Z,1513258977.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:42:57.107Z,1513258977.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:42:57.107Z,1513258977.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:42:57.107Z,1513258977.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:42:57.108Z,1513258977.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:42:57.108Z,1513258977.108 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:42:57.108Z,1513258977.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:42:57.109Z,1513258977.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:42:57.551Z,1513258977.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:57.908Z,1513258977.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:58.303Z,1513258978.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:58.700Z,1513258978.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:59.107Z,1513258979.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:59.504Z,1513258979.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:42:59.904Z,1513258979.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:00.312Z,1513258980.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:00.759Z,1513258980.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:01.102Z,1513258981.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:01.505Z,1513258981.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:01.903Z,1513258981.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:02.300Z,1513258982.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:02.751Z,1513258982.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:03.111Z,1513258983.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:03.487Z,1513258983.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:03.934Z,1513258983.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:04.319Z,1513258984.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:04.739Z,1513258984.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:05.091Z,1513258985.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:05.486Z,1513258985.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:05.917Z,1513258985.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:06.312Z,1513258986.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:06.715Z,1513258986.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:07.169Z,1513258987.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:07.499Z,1513258987.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:07.894Z,1513258987.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:08.332Z,1513258988.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:08.707Z,1513258988.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:09.098Z,1513258989.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:09.498Z,1513258989.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:09.901Z,1513258989.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:10.362Z,1513258990.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:10.698Z,1513258990.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:11.099Z,1513258991.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:11.506Z,1513258991.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:11.940Z,1513258991.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:12.301Z,1513258992.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:12.697Z,1513258992.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:13.098Z,1513258993.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:13.544Z,1513258993.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:13.911Z,1513258993.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:14.290Z,1513258994.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:14.696Z,1513258994.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:15.143Z,1513258995.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:15.497Z,1513258995.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:15.899Z,1513258995.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:16.298Z,1513258996.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:16.732Z,1513258996.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:17.103Z,1513258997.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:17.526Z,1513258997.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:17.889Z,1513258997.889 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:43:17.889Z,1513258997.889 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:43:17.889Z,1513258997.889 [BPC1](ERROR): Communications Fault
2017-12-14T13:43:17.897Z,1513258997.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:17.935Z,1513258997.935 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:43:18.303Z,1513258998.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:18.707Z,1513258998.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:19.099Z,1513258999.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:19.112Z,1513258999.112 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:43:19.112Z,1513258999.112 [BPC1] No Fault, FailCount= 1
2017-12-14T13:43:19.551Z,1513258999.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:19.947Z,1513258999.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:20.297Z,1513259000.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:20.706Z,1513259000.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:21.139Z,1513259001.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:21.495Z,1513259001.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:21.898Z,1513259001.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:22.272Z,1513259002.272 [NAL9602](INFO): Powering up NAL9602
2017-12-14T13:43:22.342Z,1513259002.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:22.707Z,1513259002.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:23.144Z,1513259003.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:23.503Z,1513259003.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:23.899Z,1513259003.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:24.303Z,1513259004.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:24.720Z,1513259004.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:25.107Z,1513259005.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:25.498Z,1513259005.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:25.893Z,1513259005.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:26.343Z,1513259006.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:26.704Z,1513259006.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:27.103Z,1513259007.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:27.636Z,1513259007.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:27.963Z,1513259007.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:28.309Z,1513259008.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:28.714Z,1513259008.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:29.102Z,1513259009.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:29.548Z,1513259009.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:29.910Z,1513259009.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:30.301Z,1513259010.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:30.704Z,1513259010.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:31.107Z,1513259011.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:31.506Z,1513259011.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:31.906Z,1513259011.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:32.310Z,1513259012.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:32.754Z,1513259012.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:33.113Z,1513259013.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:33.462Z,1513259013.462 [NAL9602](INFO): NAL9602 initialized
2017-12-14T13:43:33.519Z,1513259013.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:33.914Z,1513259013.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:34.323Z,1513259014.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:34.723Z,1513259014.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:35.120Z,1513259015.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:35.499Z,1513259015.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:35.949Z,1513259015.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:36.333Z,1513259016.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:36.720Z,1513259016.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:37.128Z,1513259017.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:37.524Z,1513259017.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:41.067Z,1513259021.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:41.199Z,1513259021.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:41.583Z,1513259021.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:41.948Z,1513259021.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:42.399Z,1513259022.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:42.741Z,1513259022.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:43.141Z,1513259023.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:43.554Z,1513259023.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:43.963Z,1513259023.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:44.354Z,1513259024.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:44.755Z,1513259024.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:45.151Z,1513259025.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:45.599Z,1513259025.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:45.954Z,1513259025.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:46.351Z,1513259026.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:46.747Z,1513259026.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:47.151Z,1513259027.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:47.555Z,1513259027.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:47.959Z,1513259027.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:48.348Z,1513259028.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:48.775Z,1513259028.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:49.158Z,1513259029.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:49.563Z,1513259029.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:49.962Z,1513259029.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:50.367Z,1513259030.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:50.767Z,1513259030.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:51.154Z,1513259031.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:51.562Z,1513259031.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:51.999Z,1513259031.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:52.371Z,1513259032.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:52.753Z,1513259032.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:53.135Z,1513259033.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:53.564Z,1513259033.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:53.969Z,1513259033.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:54.366Z,1513259034.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:54.739Z,1513259034.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:55.218Z,1513259035.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:55.549Z,1513259035.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:55.948Z,1513259035.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:56.351Z,1513259036.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:56.742Z,1513259036.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:57.138Z,1513259037.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:57.548Z,1513259037.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:57.949Z,1513259037.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:58.407Z,1513259038.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:58.751Z,1513259038.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:59.143Z,1513259039.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:59.543Z,1513259039.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:43:59.948Z,1513259039.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:00.341Z,1513259040.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:00.763Z,1513259040.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:01.199Z,1513259041.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:01.573Z,1513259041.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:01.955Z,1513259041.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:02.358Z,1513259042.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:02.780Z,1513259042.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:03.136Z,1513259043.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:03.564Z,1513259043.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:04.004Z,1513259044.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:04.407Z,1513259044.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:04.808Z,1513259044.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:05.147Z,1513259045.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:05.552Z,1513259045.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:05.953Z,1513259045.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:06.352Z,1513259046.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:06.763Z,1513259046.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:07.145Z,1513259047.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:07.553Z,1513259047.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:07.999Z,1513259047.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:08.363Z,1513259048.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:08.751Z,1513259048.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:09.155Z,1513259049.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:09.560Z,1513259049.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:10.070Z,1513259050.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:10.354Z,1513259050.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:10.736Z,1513259050.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:11.202Z,1513259051.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:11.568Z,1513259051.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:11.960Z,1513259051.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:12.344Z,1513259052.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:12.743Z,1513259052.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:13.177Z,1513259053.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:13.546Z,1513259053.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:13.951Z,1513259053.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:14.402Z,1513259054.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:14.744Z,1513259054.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:15.142Z,1513259055.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:15.555Z,1513259055.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:15.967Z,1513259055.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:16.362Z,1513259056.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:16.740Z,1513259056.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:17.140Z,1513259057.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:17.595Z,1513259057.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:17.952Z,1513259057.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:18.344Z,1513259058.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:18.743Z,1513259058.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:19.143Z,1513259059.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:19.550Z,1513259059.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:19.948Z,1513259059.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:20.346Z,1513259060.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:20.767Z,1513259060.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:21.143Z,1513259061.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:21.557Z,1513259061.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:21.962Z,1513259061.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:22.359Z,1513259062.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:22.751Z,1513259062.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:23.150Z,1513259063.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:23.557Z,1513259063.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:24.044Z,1513259064.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:24.379Z,1513259064.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:24.783Z,1513259064.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:25.130Z,1513259065.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:25.563Z,1513259065.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:25.979Z,1513259065.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:26.359Z,1513259066.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:26.775Z,1513259066.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:27.205Z,1513259067.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:27.555Z,1513259067.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:27.968Z,1513259067.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:28.380Z,1513259068.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:28.736Z,1513259068.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:29.138Z,1513259069.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:29.565Z,1513259069.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:29.944Z,1513259069.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:30.373Z,1513259070.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:30.741Z,1513259070.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:31.135Z,1513259071.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:31.567Z,1513259071.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:31.951Z,1513259071.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:32.352Z,1513259072.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:32.740Z,1513259072.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:33.146Z,1513259073.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:33.626Z,1513259073.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:33.951Z,1513259073.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:34.352Z,1513259074.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:34.739Z,1513259074.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:35.168Z,1513259075.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:35.540Z,1513259075.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:35.951Z,1513259075.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:36.343Z,1513259076.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:36.787Z,1513259076.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:37.144Z,1513259077.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:37.545Z,1513259077.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:41.077Z,1513259081.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:41.219Z,1513259081.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:41.547Z,1513259081.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:41.952Z,1513259081.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:42.349Z,1513259082.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:42.753Z,1513259082.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:43.175Z,1513259083.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:43.568Z,1513259083.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:43.950Z,1513259083.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:44.350Z,1513259084.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:44.759Z,1513259084.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:45.151Z,1513259085.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:45.567Z,1513259085.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:45.998Z,1513259085.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:46.381Z,1513259086.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:46.740Z,1513259086.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:47.146Z,1513259087.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:47.592Z,1513259087.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:47.969Z,1513259087.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:48.391Z,1513259088.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:48.750Z,1513259088.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:49.186Z,1513259089.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:49.622Z,1513259089.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:49.975Z,1513259089.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:50.373Z,1513259090.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:50.749Z,1513259090.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:51.151Z,1513259091.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:51.584Z,1513259091.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:51.954Z,1513259091.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:52.351Z,1513259092.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:52.801Z,1513259092.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:53.150Z,1513259093.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:53.559Z,1513259093.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:53.953Z,1513259093.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:54.352Z,1513259094.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:54.760Z,1513259094.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:55.148Z,1513259095.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:55.553Z,1513259095.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:55.985Z,1513259095.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:56.359Z,1513259096.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:56.754Z,1513259096.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:57.210Z,1513259097.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:57.558Z,1513259097.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:57.964Z,1513259097.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:58.359Z,1513259098.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:58.749Z,1513259098.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:59.196Z,1513259099.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:59.563Z,1513259099.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:44:59.960Z,1513259099.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:00.360Z,1513259100.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:00.759Z,1513259100.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:01.151Z,1513259101.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:01.556Z,1513259101.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:01.958Z,1513259101.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:02.383Z,1513259102.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:02.750Z,1513259102.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:03.155Z,1513259103.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:03.552Z,1513259103.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:03.957Z,1513259103.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:04.353Z,1513259104.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:04.748Z,1513259104.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:05.159Z,1513259105.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:05.556Z,1513259105.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:05.972Z,1513259105.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:06.363Z,1513259106.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:06.751Z,1513259106.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:07.156Z,1513259107.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:07.564Z,1513259107.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:07.960Z,1513259107.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:08.410Z,1513259108.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:08.815Z,1513259108.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:09.157Z,1513259109.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:09.570Z,1513259109.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:09.991Z,1513259109.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:10.367Z,1513259110.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:10.779Z,1513259110.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:11.151Z,1513259111.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:11.570Z,1513259111.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:12.019Z,1513259112.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:12.367Z,1513259112.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:12.744Z,1513259112.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:13.147Z,1513259113.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:13.570Z,1513259113.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:13.969Z,1513259113.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:14.369Z,1513259114.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:14.746Z,1513259114.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:15.188Z,1513259115.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:15.572Z,1513259115.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:15.970Z,1513259115.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:16.362Z,1513259116.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:16.748Z,1513259116.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:17.144Z,1513259117.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:17.576Z,1513259117.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:17.977Z,1513259117.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:18.399Z,1513259118.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:18.751Z,1513259118.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:19.175Z,1513259119.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:19.553Z,1513259119.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:19.988Z,1513259119.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:20.359Z,1513259120.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:20.752Z,1513259120.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:21.146Z,1513259121.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:21.552Z,1513259121.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:21.962Z,1513259121.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:22.360Z,1513259122.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:22.748Z,1513259122.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:23.163Z,1513259123.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:23.568Z,1513259123.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:23.964Z,1513259123.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:24.367Z,1513259124.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:24.808Z,1513259124.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:25.167Z,1513259125.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:25.571Z,1513259125.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:25.966Z,1513259125.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:26.367Z,1513259126.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:26.740Z,1513259126.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:27.163Z,1513259127.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:27.564Z,1513259127.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:28.011Z,1513259128.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:28.368Z,1513259128.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:28.765Z,1513259128.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:29.168Z,1513259129.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:29.599Z,1513259129.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:29.966Z,1513259129.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:30.372Z,1513259130.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:30.752Z,1513259130.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:31.254Z,1513259131.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:31.578Z,1513259131.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:31.965Z,1513259131.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:32.385Z,1513259132.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:32.752Z,1513259132.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:33.187Z,1513259133.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:33.561Z,1513259133.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:33.961Z,1513259133.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:34.392Z,1513259134.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:34.752Z,1513259134.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:35.150Z,1513259135.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:35.568Z,1513259135.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:35.960Z,1513259135.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:36.363Z,1513259136.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:36.752Z,1513259136.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:37.152Z,1513259137.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:37.594Z,1513259137.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:41.047Z,1513259141.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:41.219Z,1513259141.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:41.542Z,1513259141.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:41.918Z,1513259141.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:42.324Z,1513259142.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:42.744Z,1513259142.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:43.152Z,1513259143.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:43.527Z,1513259143.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:43.961Z,1513259143.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:44.327Z,1513259144.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:44.720Z,1513259144.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:45.127Z,1513259145.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:45.522Z,1513259145.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:45.930Z,1513259145.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:46.378Z,1513259146.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:46.739Z,1513259146.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:47.160Z,1513259147.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:47.526Z,1513259147.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:47.923Z,1513259147.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:48.328Z,1513259148.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:48.741Z,1513259148.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:49.139Z,1513259149.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:49.532Z,1513259149.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:49.935Z,1513259149.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:50.359Z,1513259150.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:50.726Z,1513259150.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:51.131Z,1513259151.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:51.513Z,1513259151.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:51.936Z,1513259151.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:52.343Z,1513259152.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:52.743Z,1513259152.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:53.162Z,1513259153.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:53.564Z,1513259153.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:53.927Z,1513259153.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:54.359Z,1513259154.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:54.730Z,1513259154.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:55.155Z,1513259155.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:55.528Z,1513259155.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:55.935Z,1513259155.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:56.327Z,1513259156.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:56.761Z,1513259156.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:57.131Z,1513259157.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:57.131Z,1513259157.131 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 264
2017-12-14T13:45:57.131Z,1513259157.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:45:57.133Z,1513259157.133 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:57.133Z,1513259157.133 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 264
2017-12-14T13:45:57.133Z,1513259157.133 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:45:57.135Z,1513259157.135 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:57.135Z,1513259157.135 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 264
2017-12-14T13:45:57.136Z,1513259157.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:45:57.164Z,1513259157.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:45:57.164Z,1513259157.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:45:57.164Z,1513259157.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:45:57.544Z,1513259157.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:45:57.544Z,1513259157.544 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 264
2017-12-14T13:45:57.573Z,1513259157.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:45:57.573Z,1513259157.573 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 264
2017-12-14T13:45:57.573Z,1513259157.573 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:45:57.573Z,1513259157.573 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 264
2017-12-14T13:45:57.928Z,1513259157.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:45:57.928Z,1513259157.928 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:45:57.929Z,1513259157.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:45:57.929Z,1513259157.929 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:45:57.930Z,1513259157.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:45:57.930Z,1513259157.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:45:57.930Z,1513259157.930 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:45:57.931Z,1513259157.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:45:57.931Z,1513259157.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:45:58.328Z,1513259158.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:58.727Z,1513259158.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:59.125Z,1513259159.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:59.533Z,1513259159.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:45:59.991Z,1513259159.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:00.328Z,1513259160.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:00.743Z,1513259160.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:01.116Z,1513259161.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:01.547Z,1513259161.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:01.938Z,1513259161.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:02.325Z,1513259162.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:02.719Z,1513259162.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:03.211Z,1513259163.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:03.521Z,1513259163.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:03.927Z,1513259163.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:04.331Z,1513259164.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:04.726Z,1513259164.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:05.124Z,1513259165.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:05.523Z,1513259165.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:05.955Z,1513259165.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:06.358Z,1513259166.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:06.728Z,1513259166.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:07.133Z,1513259167.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:07.532Z,1513259167.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:07.922Z,1513259167.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:08.321Z,1513259168.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:08.736Z,1513259168.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:09.128Z,1513259169.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:09.587Z,1513259169.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:09.929Z,1513259169.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:10.329Z,1513259170.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:10.731Z,1513259170.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:11.126Z,1513259171.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:11.523Z,1513259171.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:11.932Z,1513259171.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:12.336Z,1513259172.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:12.777Z,1513259172.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:13.127Z,1513259173.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:13.523Z,1513259173.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:13.925Z,1513259173.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:14.325Z,1513259174.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:14.734Z,1513259174.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:15.183Z,1513259175.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:15.552Z,1513259175.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:15.943Z,1513259175.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:16.335Z,1513259176.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:16.776Z,1513259176.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:17.134Z,1513259177.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:17.579Z,1513259177.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:17.938Z,1513259177.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:18.332Z,1513259178.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:18.733Z,1513259178.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:19.190Z,1513259179.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:19.534Z,1513259179.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:19.940Z,1513259179.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:20.339Z,1513259180.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:20.733Z,1513259180.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:21.134Z,1513259181.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:21.547Z,1513259181.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:21.943Z,1513259181.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:22.430Z,1513259182.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:22.735Z,1513259182.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:23.131Z,1513259183.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:23.514Z,1513259183.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:23.936Z,1513259183.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:24.340Z,1513259184.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:24.737Z,1513259184.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:25.147Z,1513259185.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:25.548Z,1513259185.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:25.952Z,1513259185.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:26.339Z,1513259186.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:26.719Z,1513259186.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:27.123Z,1513259187.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:27.544Z,1513259187.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:27.941Z,1513259187.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:28.324Z,1513259188.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:28.766Z,1513259188.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:29.116Z,1513259189.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:29.548Z,1513259189.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:29.950Z,1513259189.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:30.324Z,1513259190.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:30.722Z,1513259190.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:31.121Z,1513259191.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:31.520Z,1513259191.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:31.996Z,1513259191.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:32.324Z,1513259192.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:32.723Z,1513259192.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:33.121Z,1513259193.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:33.549Z,1513259193.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:33.949Z,1513259193.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:34.327Z,1513259194.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:34.719Z,1513259194.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:35.181Z,1513259195.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:35.528Z,1513259195.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:35.930Z,1513259195.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:36.335Z,1513259196.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:36.729Z,1513259196.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:37.128Z,1513259197.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:37.586Z,1513259197.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:37.924Z,1513259197.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:41.391Z,1513259201.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:41.580Z,1513259201.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:41.927Z,1513259201.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:42.296Z,1513259202.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:42.679Z,1513259202.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:43.082Z,1513259203.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:43.484Z,1513259203.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:43.903Z,1513259203.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:44.299Z,1513259204.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:44.729Z,1513259204.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:45.080Z,1513259205.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:45.480Z,1513259205.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:45.885Z,1513259205.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:46.281Z,1513259206.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:46.689Z,1513259206.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:47.092Z,1513259207.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:47.495Z,1513259207.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:47.983Z,1513259207.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:48.347Z,1513259208.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:48.696Z,1513259208.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:49.088Z,1513259209.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:49.547Z,1513259209.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:49.901Z,1513259209.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:50.347Z,1513259210.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:50.746Z,1513259210.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:51.096Z,1513259211.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:51.550Z,1513259211.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:51.904Z,1513259211.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:52.337Z,1513259212.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:52.719Z,1513259212.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:53.127Z,1513259213.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:53.503Z,1513259213.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:53.910Z,1513259213.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:54.283Z,1513259214.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:54.711Z,1513259214.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:55.087Z,1513259215.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:55.470Z,1513259215.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:55.915Z,1513259215.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:56.311Z,1513259216.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:56.707Z,1513259216.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:57.075Z,1513259217.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:57.511Z,1513259217.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:57.918Z,1513259217.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:58.287Z,1513259218.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:58.694Z,1513259218.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:59.093Z,1513259219.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:59.487Z,1513259219.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:46:59.893Z,1513259219.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:00.283Z,1513259220.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:00.682Z,1513259220.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:01.081Z,1513259221.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:01.483Z,1513259221.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:01.890Z,1513259221.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:02.405Z,1513259222.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:02.703Z,1513259222.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:03.088Z,1513259223.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:03.507Z,1513259223.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:03.888Z,1513259223.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:04.307Z,1513259224.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:04.715Z,1513259224.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:05.108Z,1513259225.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:05.484Z,1513259225.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:05.879Z,1513259225.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:06.348Z,1513259226.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:06.690Z,1513259226.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:07.091Z,1513259227.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:07.491Z,1513259227.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:07.928Z,1513259227.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:08.311Z,1513259228.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:08.715Z,1513259228.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:09.084Z,1513259229.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:09.519Z,1513259229.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:09.886Z,1513259229.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:10.286Z,1513259230.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:10.696Z,1513259230.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:11.133Z,1513259231.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:11.506Z,1513259231.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:11.908Z,1513259231.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:12.304Z,1513259232.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:12.763Z,1513259232.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:13.076Z,1513259233.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:13.519Z,1513259233.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:13.907Z,1513259233.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:14.303Z,1513259234.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:14.738Z,1513259234.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:15.089Z,1513259235.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:15.551Z,1513259235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:15.897Z,1513259235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:16.299Z,1513259236.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:16.712Z,1513259236.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:17.133Z,1513259237.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:17.512Z,1513259237.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:17.946Z,1513259237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:18.314Z,1513259238.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:18.702Z,1513259238.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:19.084Z,1513259239.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:19.490Z,1513259239.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:19.937Z,1513259239.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:20.339Z,1513259240.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:20.695Z,1513259240.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:21.108Z,1513259241.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:21.496Z,1513259241.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:21.910Z,1513259241.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:22.292Z,1513259242.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:22.698Z,1513259242.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:23.117Z,1513259243.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:23.500Z,1513259243.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:23.889Z,1513259243.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:24.285Z,1513259244.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:24.731Z,1513259244.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:25.110Z,1513259245.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:25.532Z,1513259245.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:25.902Z,1513259245.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:26.335Z,1513259246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:26.691Z,1513259246.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:27.090Z,1513259247.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:27.514Z,1513259247.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:27.883Z,1513259247.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:28.285Z,1513259248.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:28.683Z,1513259248.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:29.091Z,1513259249.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:29.484Z,1513259249.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:29.881Z,1513259249.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:30.278Z,1513259250.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:30.687Z,1513259250.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:31.164Z,1513259251.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:31.481Z,1513259251.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:31.891Z,1513259251.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:32.284Z,1513259252.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:32.688Z,1513259252.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:33.111Z,1513259253.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:33.482Z,1513259253.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:33.880Z,1513259253.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:34.363Z,1513259254.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:34.685Z,1513259254.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:35.084Z,1513259255.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:35.493Z,1513259255.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:35.887Z,1513259255.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:36.283Z,1513259256.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:36.680Z,1513259256.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:37.087Z,1513259257.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:37.091Z,1513259257.091 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:47:37.091Z,1513259257.091 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:47:37.091Z,1513259257.091 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:47:37.091Z,1513259257.091 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:47:37.480Z,1513259257.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:37.484Z,1513259257.484 [Default:CheckIn:D] Stopped
2017-12-14T13:47:37.484Z,1513259257.484 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:47:37.895Z,1513259257.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:37.900Z,1513259257.900 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 794.368229 min 
2017-12-14T13:47:37.900Z,1513259257.900 [Default:CheckIn:E] Stopped
2017-12-14T13:47:37.900Z,1513259257.900 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:47:37.900Z,1513259257.900 [Default:CheckIn] Stopped
2017-12-14T13:47:37.901Z,1513259257.901 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:47:37.901Z,1513259257.901 [Default:CheckIn](INFO): Running loop #77
2017-12-14T13:47:37.901Z,1513259257.901 [Default:CheckIn] Running Loop=77
2017-12-14T13:47:37.901Z,1513259257.901 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:47:37.901Z,1513259257.901 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:47:38.302Z,1513259258.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:41.695Z,1513259261.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:41.830Z,1513259261.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:42.264Z,1513259262.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:42.621Z,1513259262.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:43.010Z,1513259263.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:43.389Z,1513259263.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:43.820Z,1513259263.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:44.263Z,1513259264.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:44.619Z,1513259264.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:44.998Z,1513259264.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:45.401Z,1513259265.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:45.806Z,1513259265.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:46.310Z,1513259266.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:46.703Z,1513259266.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:47.034Z,1513259267.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:47.434Z,1513259267.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:47.799Z,1513259267.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:48.291Z,1513259268.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:48.608Z,1513259268.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:48.995Z,1513259268.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:49.392Z,1513259269.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:49.835Z,1513259269.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:50.204Z,1513259270.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:50.633Z,1513259270.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:50.996Z,1513259270.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:51.404Z,1513259271.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:51.802Z,1513259271.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:52.197Z,1513259272.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:52.628Z,1513259272.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:53.029Z,1513259273.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:53.412Z,1513259273.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:53.799Z,1513259273.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:54.265Z,1513259274.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:54.612Z,1513259274.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:55.002Z,1513259275.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:55.401Z,1513259275.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:55.815Z,1513259275.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:56.323Z,1513259276.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:56.626Z,1513259276.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:57.008Z,1513259277.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:57.404Z,1513259277.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:57.808Z,1513259277.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:58.276Z,1513259278.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:58.611Z,1513259278.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:59.011Z,1513259279.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:59.404Z,1513259279.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:47:59.798Z,1513259279.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:00.256Z,1513259280.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:00.608Z,1513259280.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:01.005Z,1513259281.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:01.411Z,1513259281.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:01.811Z,1513259281.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:02.301Z,1513259282.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:02.658Z,1513259282.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:03.006Z,1513259283.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:03.405Z,1513259283.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:03.807Z,1513259283.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:04.206Z,1513259284.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:04.628Z,1513259284.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:05.012Z,1513259285.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:05.431Z,1513259285.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:05.827Z,1513259285.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:06.196Z,1513259286.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:06.629Z,1513259286.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:06.999Z,1513259286.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:07.414Z,1513259287.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:07.825Z,1513259287.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:08.303Z,1513259288.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:08.666Z,1513259288.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:09.056Z,1513259289.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:09.423Z,1513259289.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:09.803Z,1513259289.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:10.296Z,1513259290.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:10.616Z,1513259290.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:11.011Z,1513259291.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:11.410Z,1513259291.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:11.807Z,1513259291.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:12.286Z,1513259292.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:12.611Z,1513259292.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:13.002Z,1513259293.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:13.402Z,1513259293.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:13.811Z,1513259293.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:14.259Z,1513259294.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:14.641Z,1513259294.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:14.997Z,1513259294.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:15.396Z,1513259295.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:15.806Z,1513259295.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:16.305Z,1513259296.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:16.623Z,1513259296.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:17.014Z,1513259297.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:17.415Z,1513259297.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:17.811Z,1513259297.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:18.201Z,1513259298.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:18.683Z,1513259298.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:19.023Z,1513259299.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:19.392Z,1513259299.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:19.824Z,1513259299.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:20.227Z,1513259300.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:20.636Z,1513259300.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:20.998Z,1513259300.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:21.397Z,1513259301.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:21.826Z,1513259301.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:22.264Z,1513259302.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:22.632Z,1513259302.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:23.014Z,1513259303.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:23.427Z,1513259303.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:23.784Z,1513259303.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:24.254Z,1513259304.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:24.607Z,1513259304.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:25.083Z,1513259305.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:25.396Z,1513259305.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:25.812Z,1513259305.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:26.256Z,1513259306.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:26.625Z,1513259306.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:27.003Z,1513259307.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:27.401Z,1513259307.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:27.802Z,1513259307.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:28.286Z,1513259308.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:28.616Z,1513259308.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:29.018Z,1513259309.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:29.412Z,1513259309.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:29.807Z,1513259309.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:30.264Z,1513259310.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:30.647Z,1513259310.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:31.005Z,1513259311.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:31.476Z,1513259311.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:31.811Z,1513259311.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:32.235Z,1513259312.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:32.642Z,1513259312.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:32.997Z,1513259312.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:33.398Z,1513259313.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:33.801Z,1513259313.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:34.195Z,1513259314.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:34.657Z,1513259314.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:35.015Z,1513259315.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:35.412Z,1513259315.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:35.807Z,1513259315.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:36.256Z,1513259316.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:36.598Z,1513259316.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:36.993Z,1513259316.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:37.394Z,1513259317.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:37.848Z,1513259317.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:38.271Z,1513259318.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:38.608Z,1513259318.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:42.029Z,1513259322.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:42.235Z,1513259322.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:42.528Z,1513259322.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:42.937Z,1513259322.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:43.336Z,1513259323.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:43.708Z,1513259323.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:44.103Z,1513259324.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:44.513Z,1513259324.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:44.917Z,1513259324.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:45.324Z,1513259325.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:45.726Z,1513259325.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:46.114Z,1513259326.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:46.579Z,1513259326.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:46.911Z,1513259326.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:47.319Z,1513259327.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:47.727Z,1513259327.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:48.120Z,1513259328.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:48.602Z,1513259328.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:48.928Z,1513259328.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:49.311Z,1513259329.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:49.705Z,1513259329.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:50.109Z,1513259330.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:50.515Z,1513259330.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:50.931Z,1513259330.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:51.351Z,1513259331.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:51.726Z,1513259331.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:52.117Z,1513259332.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:52.528Z,1513259332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:52.925Z,1513259332.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:53.324Z,1513259333.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:53.743Z,1513259333.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:54.116Z,1513259334.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:54.599Z,1513259334.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:54.912Z,1513259334.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:55.339Z,1513259335.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:55.720Z,1513259335.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:56.191Z,1513259336.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:56.503Z,1513259336.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:56.947Z,1513259336.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:57.323Z,1513259337.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:57.741Z,1513259337.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:58.101Z,1513259338.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:58.101Z,1513259338.101 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 265
2017-12-14T13:48:58.101Z,1513259338.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:48:58.103Z,1513259338.103 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:58.103Z,1513259338.103 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 265
2017-12-14T13:48:58.103Z,1513259338.103 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:48:58.105Z,1513259338.105 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:58.106Z,1513259338.106 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 265
2017-12-14T13:48:58.106Z,1513259338.106 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:48:58.126Z,1513259338.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:48:58.126Z,1513259338.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:48:58.127Z,1513259338.127 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:48:58.540Z,1513259338.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:48:58.540Z,1513259338.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 265
2017-12-14T13:48:58.541Z,1513259338.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:48:58.541Z,1513259338.541 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 265
2017-12-14T13:48:58.542Z,1513259338.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:48:58.542Z,1513259338.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 265
2017-12-14T13:48:58.916Z,1513259338.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:48:58.921Z,1513259338.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:48:58.921Z,1513259338.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:48:58.922Z,1513259338.922 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:48:58.922Z,1513259338.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:48:58.922Z,1513259338.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:48:58.923Z,1513259338.923 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:48:58.923Z,1513259338.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:48:58.923Z,1513259338.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:48:59.299Z,1513259339.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:48:59.735Z,1513259339.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:00.165Z,1513259340.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:00.587Z,1513259340.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:00.918Z,1513259340.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:01.296Z,1513259341.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:01.732Z,1513259341.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:02.124Z,1513259342.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:02.578Z,1513259342.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:02.931Z,1513259342.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:03.375Z,1513259343.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:03.724Z,1513259343.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:04.117Z,1513259344.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:04.543Z,1513259344.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:04.911Z,1513259344.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:05.311Z,1513259345.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:05.745Z,1513259345.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:06.168Z,1513259346.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:06.544Z,1513259346.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:06.931Z,1513259346.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:07.336Z,1513259347.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:07.727Z,1513259347.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:08.102Z,1513259348.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:08.517Z,1513259348.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:08.953Z,1513259348.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:09.337Z,1513259349.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:09.791Z,1513259349.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:10.122Z,1513259350.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:10.506Z,1513259350.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:10.905Z,1513259350.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:11.313Z,1513259351.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:11.715Z,1513259351.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:12.139Z,1513259352.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:12.512Z,1513259352.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:12.903Z,1513259352.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:13.315Z,1513259353.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:13.714Z,1513259353.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:14.107Z,1513259354.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:14.568Z,1513259354.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:14.939Z,1513259354.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:15.343Z,1513259355.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:15.730Z,1513259355.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:16.153Z,1513259356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:16.611Z,1513259356.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:16.934Z,1513259356.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:17.342Z,1513259357.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:17.736Z,1513259357.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:18.226Z,1513259358.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:18.540Z,1513259358.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:18.904Z,1513259358.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:19.353Z,1513259359.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:19.712Z,1513259359.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:19.742Z,1513259359.742 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:49:20.095Z,1513259360.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:20.506Z,1513259360.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:20.930Z,1513259360.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:21.358Z,1513259361.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:21.739Z,1513259361.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:22.104Z,1513259362.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:22.531Z,1513259362.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:22.925Z,1513259362.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:23.351Z,1513259363.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:23.731Z,1513259363.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:24.114Z,1513259364.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:24.516Z,1513259364.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:24.919Z,1513259364.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:25.305Z,1513259365.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:25.714Z,1513259365.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:26.113Z,1513259366.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:26.550Z,1513259366.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:26.926Z,1513259366.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:27.328Z,1513259367.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:27.730Z,1513259367.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:28.135Z,1513259368.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:28.589Z,1513259368.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:28.930Z,1513259368.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:29.320Z,1513259369.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:29.732Z,1513259369.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:30.125Z,1513259370.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:30.579Z,1513259370.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:30.936Z,1513259370.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:31.331Z,1513259371.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:31.702Z,1513259371.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:32.116Z,1513259372.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:32.520Z,1513259372.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:32.911Z,1513259372.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:33.341Z,1513259373.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:33.733Z,1513259373.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:34.126Z,1513259374.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:34.540Z,1513259374.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:34.924Z,1513259374.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:35.316Z,1513259375.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:35.764Z,1513259375.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:36.209Z,1513259376.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:36.531Z,1513259376.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:36.921Z,1513259376.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:37.343Z,1513259377.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:37.708Z,1513259377.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:38.109Z,1513259378.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:38.531Z,1513259378.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:38.939Z,1513259378.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:42.329Z,1513259382.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:42.459Z,1513259382.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:42.843Z,1513259382.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:43.208Z,1513259383.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:43.604Z,1513259383.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:44.003Z,1513259384.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:44.400Z,1513259384.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:44.808Z,1513259384.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:45.212Z,1513259385.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:45.622Z,1513259385.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:46.010Z,1513259386.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:46.423Z,1513259386.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:46.811Z,1513259386.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:47.209Z,1513259387.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:47.614Z,1513259387.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:48.014Z,1513259388.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:48.412Z,1513259388.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:48.827Z,1513259388.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:49.212Z,1513259389.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:49.611Z,1513259389.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:50.007Z,1513259390.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:50.408Z,1513259390.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:50.818Z,1513259390.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:51.262Z,1513259391.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:51.662Z,1513259391.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:52.011Z,1513259392.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:52.423Z,1513259392.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:52.802Z,1513259392.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:53.204Z,1513259393.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:53.628Z,1513259393.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:54.025Z,1513259394.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:54.422Z,1513259394.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:54.826Z,1513259394.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:55.233Z,1513259395.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:55.599Z,1513259395.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:55.999Z,1513259395.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:56.400Z,1513259396.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:56.826Z,1513259396.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:57.225Z,1513259397.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:57.628Z,1513259397.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:58.040Z,1513259398.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:58.409Z,1513259398.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:58.811Z,1513259398.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:59.212Z,1513259399.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:49:59.618Z,1513259399.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:00.017Z,1513259400.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:00.444Z,1513259400.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:00.802Z,1513259400.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:01.255Z,1513259401.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:01.612Z,1513259401.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:02.059Z,1513259402.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:02.412Z,1513259402.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:02.819Z,1513259402.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:03.262Z,1513259403.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:03.614Z,1513259403.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:04.002Z,1513259404.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:04.509Z,1513259404.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:04.811Z,1513259404.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:05.238Z,1513259405.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:05.615Z,1513259405.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:06.017Z,1513259406.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:06.414Z,1513259406.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:06.813Z,1513259406.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:07.214Z,1513259407.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:07.659Z,1513259407.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:08.014Z,1513259408.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:08.414Z,1513259408.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:08.816Z,1513259408.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:09.219Z,1513259409.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:09.621Z,1513259409.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:09.992Z,1513259409.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:10.397Z,1513259410.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:10.844Z,1513259410.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:11.203Z,1513259411.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:11.604Z,1513259411.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:11.730Z,1513259411.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:12.033Z,1513259412.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:12.404Z,1513259412.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:12.529Z,1513259412.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:12.834Z,1513259412.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:12.937Z,1513259412.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:13.200Z,1513259413.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:13.635Z,1513259413.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:14.055Z,1513259414.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:14.410Z,1513259414.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:14.804Z,1513259414.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:15.215Z,1513259415.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:15.605Z,1513259415.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:16.001Z,1513259416.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:16.403Z,1513259416.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:16.804Z,1513259416.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:17.202Z,1513259417.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:17.640Z,1513259417.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:18.019Z,1513259418.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:18.409Z,1513259418.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:18.806Z,1513259418.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:19.205Z,1513259419.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:19.601Z,1513259419.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:20.008Z,1513259420.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:20.447Z,1513259420.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:20.809Z,1513259420.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:21.223Z,1513259421.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:21.623Z,1513259421.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:22.011Z,1513259422.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:22.419Z,1513259422.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:22.805Z,1513259422.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:23.206Z,1513259423.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:23.666Z,1513259423.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:24.023Z,1513259424.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:24.462Z,1513259424.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:24.819Z,1513259424.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:25.206Z,1513259425.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:25.647Z,1513259425.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:25.747Z,1513259425.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:26.004Z,1513259426.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:26.412Z,1513259426.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:26.544Z,1513259426.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:26.863Z,1513259426.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:26.950Z,1513259426.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:27.224Z,1513259427.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:27.679Z,1513259427.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:28.006Z,1513259428.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:28.417Z,1513259428.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:28.792Z,1513259428.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:29.217Z,1513259429.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:29.620Z,1513259429.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:30.069Z,1513259430.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:30.419Z,1513259430.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:30.809Z,1513259430.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:31.201Z,1513259431.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:31.601Z,1513259431.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:32.023Z,1513259432.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:32.407Z,1513259432.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:32.815Z,1513259432.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:33.311Z,1513259433.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:33.604Z,1513259433.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:33.999Z,1513259433.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:34.429Z,1513259434.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:34.800Z,1513259434.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:35.196Z,1513259435.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:35.629Z,1513259435.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:36.040Z,1513259436.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:36.432Z,1513259436.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:36.872Z,1513259436.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:37.200Z,1513259437.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:37.605Z,1513259437.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:38.003Z,1513259438.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:38.402Z,1513259438.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:38.828Z,1513259438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:39.233Z,1513259439.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:39.742Z,1513259439.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:40.539Z,1513259440.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:40.945Z,1513259440.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:42.707Z,1513259442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:42.883Z,1513259442.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:43.208Z,1513259443.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:43.604Z,1513259443.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:44.003Z,1513259444.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:44.403Z,1513259444.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:44.813Z,1513259444.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:45.212Z,1513259445.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:45.608Z,1513259445.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:46.003Z,1513259446.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:46.407Z,1513259446.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:46.851Z,1513259446.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:47.201Z,1513259447.201 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T13:50:47.201Z,1513259447.201 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:50:47.201Z,1513259447.201 [BPC1](ERROR): Data Fault
2017-12-14T13:50:47.209Z,1513259447.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:47.222Z,1513259447.222 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:50:47.613Z,1513259447.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:48.064Z,1513259448.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:48.419Z,1513259448.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:48.432Z,1513259448.432 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:50:48.432Z,1513259448.432 [BPC1] No Fault, FailCount= 1
2017-12-14T13:50:48.859Z,1513259448.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:49.210Z,1513259449.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:49.617Z,1513259449.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:50.016Z,1513259450.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:50.424Z,1513259450.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:50.818Z,1513259450.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:51.219Z,1513259451.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:51.623Z,1513259451.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:52.015Z,1513259452.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:52.429Z,1513259452.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:52.828Z,1513259452.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:53.200Z,1513259453.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:53.612Z,1513259453.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:53.754Z,1513259453.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:54.034Z,1513259454.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:54.409Z,1513259454.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:54.550Z,1513259454.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:54.826Z,1513259454.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:54.953Z,1513259454.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:50:55.207Z,1513259455.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:55.604Z,1513259455.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:56.000Z,1513259456.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:56.407Z,1513259456.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:56.819Z,1513259456.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:57.247Z,1513259457.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:57.615Z,1513259457.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:58.007Z,1513259458.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:58.406Z,1513259458.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:58.848Z,1513259458.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:59.212Z,1513259459.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:50:59.611Z,1513259459.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:00.013Z,1513259460.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:00.423Z,1513259460.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:00.811Z,1513259460.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:01.199Z,1513259461.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:01.606Z,1513259461.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:02.034Z,1513259462.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:02.411Z,1513259462.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:02.815Z,1513259462.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:03.215Z,1513259463.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:03.614Z,1513259463.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:04.006Z,1513259464.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:04.406Z,1513259464.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:04.809Z,1513259464.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:05.207Z,1513259465.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:05.612Z,1513259465.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:06.014Z,1513259466.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:06.423Z,1513259466.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:06.806Z,1513259466.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:07.204Z,1513259467.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:07.607Z,1513259467.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:07.734Z,1513259467.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:08.040Z,1513259468.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:08.466Z,1513259468.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:08.531Z,1513259468.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:08.818Z,1513259468.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:08.961Z,1513259468.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:09.247Z,1513259469.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:09.620Z,1513259469.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:09.758Z,1513259469.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:09.999Z,1513259469.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:10.439Z,1513259470.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:10.555Z,1513259470.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:10.819Z,1513259470.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:10.961Z,1513259470.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:11.228Z,1513259471.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:11.615Z,1513259471.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:12.030Z,1513259472.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:12.405Z,1513259472.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:12.804Z,1513259472.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:13.199Z,1513259473.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:13.607Z,1513259473.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:14.001Z,1513259474.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:14.405Z,1513259474.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:14.836Z,1513259474.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:15.234Z,1513259475.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:15.616Z,1513259475.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:16.002Z,1513259476.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:16.403Z,1513259476.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:16.807Z,1513259476.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:17.207Z,1513259477.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:17.608Z,1513259477.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:18.049Z,1513259478.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:18.412Z,1513259478.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:18.852Z,1513259478.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:19.212Z,1513259479.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:19.636Z,1513259479.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:20.015Z,1513259480.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:20.555Z,1513259480.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:20.823Z,1513259480.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:21.260Z,1513259481.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:21.655Z,1513259481.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:21.774Z,1513259481.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:22.062Z,1513259482.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:22.419Z,1513259482.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:22.570Z,1513259482.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:22.815Z,1513259482.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:22.973Z,1513259482.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:23.228Z,1513259483.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:23.627Z,1513259483.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:24.059Z,1513259484.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:24.436Z,1513259484.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:24.842Z,1513259484.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:25.224Z,1513259485.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:25.590Z,1513259485.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:26.020Z,1513259486.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:26.423Z,1513259486.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:26.834Z,1513259486.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:27.250Z,1513259487.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:27.605Z,1513259487.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:28.035Z,1513259488.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:28.434Z,1513259488.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:28.826Z,1513259488.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:29.203Z,1513259489.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:29.651Z,1513259489.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:30.067Z,1513259490.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:30.471Z,1513259490.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:30.815Z,1513259490.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:31.229Z,1513259491.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:31.668Z,1513259491.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:32.036Z,1513259492.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:32.425Z,1513259492.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:32.846Z,1513259492.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:33.251Z,1513259493.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:33.619Z,1513259493.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:34.015Z,1513259494.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:34.416Z,1513259494.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:34.839Z,1513259494.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:35.240Z,1513259495.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:35.611Z,1513259495.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:35.754Z,1513259495.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:36.051Z,1513259496.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:36.424Z,1513259496.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:36.549Z,1513259496.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:36.819Z,1513259496.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:36.954Z,1513259496.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:51:37.210Z,1513259497.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:37.646Z,1513259497.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:38.011Z,1513259498.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:38.406Z,1513259498.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:38.816Z,1513259498.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:39.219Z,1513259499.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:39.619Z,1513259499.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:46.567Z,1513259506.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:46.740Z,1513259506.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:47.096Z,1513259507.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:47.522Z,1513259507.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:47.875Z,1513259507.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:48.281Z,1513259508.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:48.660Z,1513259508.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:49.085Z,1513259509.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:49.487Z,1513259509.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:49.902Z,1513259509.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:50.289Z,1513259510.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:50.683Z,1513259510.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:51.080Z,1513259511.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:51.455Z,1513259511.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:51.879Z,1513259511.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:52.263Z,1513259512.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:52.664Z,1513259512.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:53.080Z,1513259513.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:53.464Z,1513259513.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:53.868Z,1513259513.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:54.264Z,1513259514.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:54.652Z,1513259514.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:55.054Z,1513259515.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:55.459Z,1513259515.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:55.868Z,1513259515.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:56.268Z,1513259516.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:56.664Z,1513259516.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:57.087Z,1513259517.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:57.459Z,1513259517.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:57.852Z,1513259517.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:58.251Z,1513259518.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:58.664Z,1513259518.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:59.091Z,1513259519.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:59.091Z,1513259519.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 266
2017-12-14T13:51:59.091Z,1513259519.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:51:59.093Z,1513259519.093 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:59.093Z,1513259519.093 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 266
2017-12-14T13:51:59.093Z,1513259519.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:51:59.095Z,1513259519.095 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:51:59.095Z,1513259519.095 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 266
2017-12-14T13:51:59.095Z,1513259519.095 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:51:59.107Z,1513259519.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:51:59.107Z,1513259519.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:51:59.108Z,1513259519.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:51:59.474Z,1513259519.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:51:59.474Z,1513259519.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 266
2017-12-14T13:51:59.475Z,1513259519.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:51:59.475Z,1513259519.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 266
2017-12-14T13:51:59.475Z,1513259519.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:51:59.475Z,1513259519.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 266
2017-12-14T13:51:59.850Z,1513259519.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:51:59.850Z,1513259519.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:51:59.850Z,1513259519.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:51:59.851Z,1513259519.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:51:59.851Z,1513259519.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:51:59.852Z,1513259519.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:51:59.852Z,1513259519.852 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:51:59.852Z,1513259519.852 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:51:59.853Z,1513259519.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:52:00.323Z,1513259520.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:00.650Z,1513259520.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:01.099Z,1513259521.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:01.452Z,1513259521.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:01.881Z,1513259521.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:02.265Z,1513259522.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:02.664Z,1513259522.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:03.055Z,1513259523.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:03.463Z,1513259523.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:03.876Z,1513259523.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:04.253Z,1513259524.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:04.665Z,1513259524.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:05.074Z,1513259525.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:05.467Z,1513259525.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:05.859Z,1513259525.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:06.251Z,1513259526.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:06.658Z,1513259526.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:07.056Z,1513259527.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:07.452Z,1513259527.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:07.866Z,1513259527.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:08.271Z,1513259528.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:08.664Z,1513259528.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:09.051Z,1513259529.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:09.483Z,1513259529.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:09.856Z,1513259529.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:10.335Z,1513259530.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:10.664Z,1513259530.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:11.064Z,1513259531.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:11.515Z,1513259531.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:11.856Z,1513259531.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:12.285Z,1513259532.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:12.669Z,1513259532.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:13.071Z,1513259533.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:13.463Z,1513259533.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:13.875Z,1513259533.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:14.335Z,1513259534.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:14.671Z,1513259534.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:15.056Z,1513259535.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:15.459Z,1513259535.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:15.872Z,1513259535.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:16.267Z,1513259536.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:16.672Z,1513259536.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:17.066Z,1513259537.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:17.471Z,1513259537.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:17.862Z,1513259537.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:18.254Z,1513259538.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:18.666Z,1513259538.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:19.097Z,1513259539.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:19.461Z,1513259539.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:19.874Z,1513259539.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:20.282Z,1513259540.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:20.677Z,1513259540.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:21.105Z,1513259541.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:21.479Z,1513259541.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:21.863Z,1513259541.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:22.335Z,1513259542.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:22.672Z,1513259542.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:23.130Z,1513259543.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:23.481Z,1513259543.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:23.879Z,1513259543.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:24.287Z,1513259544.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:24.659Z,1513259544.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:25.056Z,1513259545.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:25.493Z,1513259545.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:25.890Z,1513259545.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:26.288Z,1513259546.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:26.664Z,1513259546.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:27.059Z,1513259547.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:27.483Z,1513259547.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:27.857Z,1513259547.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:28.371Z,1513259548.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:28.719Z,1513259548.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:29.077Z,1513259549.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:29.462Z,1513259549.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:52:29.473Z,1513259549.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:29.867Z,1513259549.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:30.257Z,1513259550.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T13:52:30.264Z,1513259550.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:30.670Z,1513259550.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:31.063Z,1513259551.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:31.494Z,1513259551.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:31.915Z,1513259551.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:32.272Z,1513259552.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:32.674Z,1513259552.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:33.067Z,1513259553.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:33.463Z,1513259553.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:33.859Z,1513259553.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:34.275Z,1513259554.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:34.674Z,1513259554.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:35.111Z,1513259555.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:35.484Z,1513259555.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:35.867Z,1513259555.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:36.275Z,1513259556.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:36.666Z,1513259556.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:37.068Z,1513259557.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:37.466Z,1513259557.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:37.879Z,1513259557.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:38.338Z,1513259558.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:38.346Z,1513259558.346 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:47:37.9Z
2017-12-14T13:52:38.346Z,1513259558.346 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T13:52:38.347Z,1513259558.347 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T13:52:38.679Z,1513259558.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:39.436Z,1513259559.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:39.583Z,1513259559.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:43.134Z,1513259563.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:43.308Z,1513259563.308 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0308.lzma
2017-12-14T13:52:43.395Z,1513259563.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:43.694Z,1513259563.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:43.979Z,1513259563.979 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0308.lzma.bak
2017-12-14T13:52:43.979Z,1513259563.979 [DataOverHttps](INFO): SBD MOMSN=5438883
2017-12-14T13:52:44.050Z,1513259564.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:45.403Z,1513259565.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:45.532Z,1513259565.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:48.999Z,1513259568.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:49.138Z,1513259569.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:49.503Z,1513259569.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:49.894Z,1513259569.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:50.289Z,1513259570.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:50.663Z,1513259570.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:54.342Z,1513259574.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:54.492Z,1513259574.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:54.857Z,1513259574.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:55.262Z,1513259575.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:55.660Z,1513259575.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:56.063Z,1513259576.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:59.576Z,1513259579.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:52:59.651Z,1513259579.651 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0309.lzma
2017-12-14T13:52:59.747Z,1513259579.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:00.092Z,1513259580.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:17.517Z,1513259597.517 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0309.lzma.bak
2017-12-14T13:53:17.517Z,1513259597.517 [DataOverHttps](INFO): SBD MOMSN=5438885
2017-12-14T13:53:17.641Z,1513259597.641 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:53:17.641Z,1513259597.641 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:53:17.641Z,1513259597.641 [BPC1](ERROR): Communications Fault
2017-12-14T13:53:17.676Z,1513259597.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:17.740Z,1513259597.740 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:53:18.867Z,1513259598.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:18.870Z,1513259598.870 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T13:53:18.870Z,1513259598.870 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T13:53:18.870Z,1513259598.870 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T13:53:18.988Z,1513259598.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:22.600Z,1513259602.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:22.639Z,1513259602.639 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:53:22.639Z,1513259602.639 [BPC1] No Fault, FailCount= 1
2017-12-14T13:53:22.847Z,1513259602.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:23.119Z,1513259603.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:23.524Z,1513259603.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:23.914Z,1513259603.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:24.307Z,1513259604.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:24.711Z,1513259604.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:25.103Z,1513259605.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:25.501Z,1513259605.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:25.943Z,1513259605.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:26.314Z,1513259606.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:26.710Z,1513259606.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:27.104Z,1513259607.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:27.505Z,1513259607.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:27.904Z,1513259607.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:28.307Z,1513259608.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:28.709Z,1513259608.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:29.160Z,1513259609.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:29.519Z,1513259609.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:29.907Z,1513259609.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:30.307Z,1513259610.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:30.714Z,1513259610.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:31.147Z,1513259611.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:31.502Z,1513259611.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:31.921Z,1513259611.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:32.340Z,1513259612.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:32.715Z,1513259612.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:33.106Z,1513259613.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:33.508Z,1513259613.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:33.904Z,1513259613.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:34.319Z,1513259614.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:34.662Z,1513259614.662 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T13:53:34.662Z,1513259614.662 [NAL9602] Data Fault, FailCount= 3
2017-12-14T13:53:34.663Z,1513259614.663 [NAL9602](ERROR): Data Fault
2017-12-14T13:53:34.716Z,1513259614.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:34.746Z,1513259614.746 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T13:53:35.058Z,1513259615.058 [NAL9602](INFO): Powering down
2017-12-14T13:53:35.146Z,1513259615.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:35.563Z,1513259615.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:35.915Z,1513259615.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:35.947Z,1513259615.947 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T13:53:35.947Z,1513259615.947 [NAL9602] No Fault, FailCount= 3
2017-12-14T13:53:36.288Z,1513259616.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:36.719Z,1513259616.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:37.095Z,1513259617.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:37.496Z,1513259617.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:37.893Z,1513259617.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:38.324Z,1513259618.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:38.774Z,1513259618.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:39.095Z,1513259619.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:39.498Z,1513259619.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:39.896Z,1513259619.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:40.308Z,1513259620.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:40.707Z,1513259620.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:41.102Z,1513259621.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:41.503Z,1513259621.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:41.960Z,1513259621.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:42.327Z,1513259622.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:42.720Z,1513259622.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:43.127Z,1513259623.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:43.505Z,1513259623.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:43.931Z,1513259623.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:44.305Z,1513259624.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:44.726Z,1513259624.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:45.135Z,1513259625.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:45.508Z,1513259625.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:45.909Z,1513259625.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:46.312Z,1513259626.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:46.711Z,1513259626.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:47.108Z,1513259627.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:47.510Z,1513259627.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:47.886Z,1513259627.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:48.354Z,1513259628.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:48.711Z,1513259628.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:49.094Z,1513259629.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:49.489Z,1513259629.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:49.894Z,1513259629.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:50.319Z,1513259630.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:50.695Z,1513259630.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:51.095Z,1513259631.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:51.540Z,1513259631.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:51.898Z,1513259631.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:52.321Z,1513259632.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:52.699Z,1513259632.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:53.120Z,1513259633.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:53.494Z,1513259633.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:53.898Z,1513259633.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:54.311Z,1513259634.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:54.737Z,1513259634.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:55.195Z,1513259635.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:55.491Z,1513259635.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:55.891Z,1513259635.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:56.298Z,1513259636.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:56.695Z,1513259636.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:57.120Z,1513259637.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:57.519Z,1513259637.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:57.938Z,1513259637.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:58.294Z,1513259638.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:58.703Z,1513259638.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:59.099Z,1513259639.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:59.511Z,1513259639.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:53:59.907Z,1513259639.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:00.303Z,1513259640.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:00.706Z,1513259640.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:01.108Z,1513259641.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:01.550Z,1513259641.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:01.911Z,1513259641.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:02.310Z,1513259642.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:02.718Z,1513259642.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:03.094Z,1513259643.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:03.496Z,1513259643.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:03.940Z,1513259643.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:04.351Z,1513259644.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:04.724Z,1513259644.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:05.119Z,1513259645.119 [NAL9602](INFO): Powering up NAL9602
2017-12-14T13:54:05.200Z,1513259645.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:05.498Z,1513259645.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:05.903Z,1513259645.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:06.330Z,1513259646.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:06.708Z,1513259646.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:07.139Z,1513259647.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:07.539Z,1513259647.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:07.910Z,1513259647.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:08.304Z,1513259648.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:08.710Z,1513259648.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:09.108Z,1513259649.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:09.551Z,1513259649.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:09.905Z,1513259649.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:10.304Z,1513259650.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:10.754Z,1513259650.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:11.108Z,1513259651.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:11.507Z,1513259651.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:11.905Z,1513259651.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:12.303Z,1513259652.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:12.710Z,1513259652.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:13.150Z,1513259653.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:13.511Z,1513259653.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:13.979Z,1513259653.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:14.304Z,1513259654.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:14.717Z,1513259654.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:15.094Z,1513259655.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:15.538Z,1513259655.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:16.037Z,1513259656.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:16.258Z,1513259656.258 [NAL9602](INFO): NAL9602 initialized
2017-12-14T13:54:16.290Z,1513259656.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:16.699Z,1513259656.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:17.176Z,1513259657.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:17.529Z,1513259657.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:17.991Z,1513259657.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:18.299Z,1513259658.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:18.696Z,1513259658.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:19.098Z,1513259659.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:19.530Z,1513259659.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:22.999Z,1513259662.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:23.172Z,1513259663.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:23.538Z,1513259663.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:23.980Z,1513259663.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:24.296Z,1513259664.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:24.730Z,1513259664.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:25.108Z,1513259665.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:25.529Z,1513259665.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:25.939Z,1513259665.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:26.303Z,1513259666.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:26.722Z,1513259666.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:27.092Z,1513259667.092 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T13:54:27.092Z,1513259667.092 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:54:27.092Z,1513259667.092 [BPC1](ERROR): Data Fault
2017-12-14T13:54:27.100Z,1513259667.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:27.113Z,1513259667.113 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:54:27.510Z,1513259667.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:27.916Z,1513259667.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:28.313Z,1513259668.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:28.326Z,1513259668.326 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:54:28.326Z,1513259668.326 [BPC1] No Fault, FailCount= 1
2017-12-14T13:54:28.763Z,1513259668.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:29.107Z,1513259669.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:29.499Z,1513259669.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:29.942Z,1513259669.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:30.303Z,1513259670.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:30.704Z,1513259670.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:31.105Z,1513259671.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:31.511Z,1513259671.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:31.900Z,1513259671.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:32.303Z,1513259672.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:32.707Z,1513259672.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:33.131Z,1513259673.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:33.504Z,1513259673.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:33.909Z,1513259673.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:34.331Z,1513259674.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:34.700Z,1513259674.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:35.107Z,1513259675.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:35.501Z,1513259675.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:35.903Z,1513259675.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:36.335Z,1513259676.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:36.708Z,1513259676.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:37.146Z,1513259677.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:37.516Z,1513259677.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:37.896Z,1513259677.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:38.323Z,1513259678.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:38.724Z,1513259678.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:39.096Z,1513259679.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:39.508Z,1513259679.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:39.931Z,1513259679.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:40.311Z,1513259680.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:40.698Z,1513259680.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:41.097Z,1513259681.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:41.498Z,1513259681.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:41.907Z,1513259681.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:42.299Z,1513259682.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:42.712Z,1513259682.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:43.108Z,1513259683.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:43.558Z,1513259683.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:43.907Z,1513259683.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:44.300Z,1513259684.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:44.709Z,1513259684.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:45.105Z,1513259685.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:45.506Z,1513259685.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:45.909Z,1513259685.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:46.311Z,1513259686.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:46.737Z,1513259686.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:47.091Z,1513259687.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:47.495Z,1513259687.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:47.932Z,1513259687.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:48.300Z,1513259688.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:48.725Z,1513259688.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:49.151Z,1513259689.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:49.529Z,1513259689.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:49.933Z,1513259689.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:50.335Z,1513259690.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:50.711Z,1513259690.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:51.132Z,1513259691.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:51.515Z,1513259691.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:51.909Z,1513259691.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:52.315Z,1513259692.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:52.711Z,1513259692.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:53.164Z,1513259693.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:53.512Z,1513259693.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:53.905Z,1513259693.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:54.301Z,1513259694.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:54.722Z,1513259694.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:55.118Z,1513259695.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:55.509Z,1513259695.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:55.905Z,1513259695.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:56.307Z,1513259696.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:56.706Z,1513259696.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:57.120Z,1513259697.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:57.496Z,1513259697.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:57.916Z,1513259697.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:58.349Z,1513259698.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:58.696Z,1513259698.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.100Z,1513259699.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.555Z,1513259699.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.901Z,1513259699.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.901Z,1513259699.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 267
2017-12-14T13:54:59.901Z,1513259699.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:54:59.903Z,1513259699.903 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.903Z,1513259699.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 267
2017-12-14T13:54:59.903Z,1513259699.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:54:59.905Z,1513259699.905 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:54:59.905Z,1513259699.905 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 267
2017-12-14T13:54:59.905Z,1513259699.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:54:59.930Z,1513259699.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:54:59.930Z,1513259699.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:54:59.931Z,1513259699.931 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:55:00.309Z,1513259700.309 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:55:00.309Z,1513259700.309 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 267
2017-12-14T13:55:00.309Z,1513259700.309 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:55:00.309Z,1513259700.309 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 267
2017-12-14T13:55:00.310Z,1513259700.310 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:55:00.310Z,1513259700.310 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 267
2017-12-14T13:55:00.715Z,1513259700.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:55:00.715Z,1513259700.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:55:00.716Z,1513259700.716 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:55:00.716Z,1513259700.716 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:55:00.716Z,1513259700.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:55:00.733Z,1513259700.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:55:00.733Z,1513259700.733 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:55:00.734Z,1513259700.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:55:00.734Z,1513259700.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:55:01.112Z,1513259701.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:01.512Z,1513259701.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:01.903Z,1513259701.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:02.313Z,1513259702.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:02.728Z,1513259702.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:03.110Z,1513259703.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:03.519Z,1513259703.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:03.916Z,1513259703.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:04.320Z,1513259704.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:04.710Z,1513259704.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:05.111Z,1513259705.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:05.517Z,1513259705.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:05.965Z,1513259705.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:06.294Z,1513259706.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:06.719Z,1513259706.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:07.127Z,1513259707.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:07.516Z,1513259707.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:07.896Z,1513259707.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:08.296Z,1513259708.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:08.699Z,1513259708.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:09.138Z,1513259709.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:09.527Z,1513259709.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:09.974Z,1513259709.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:10.335Z,1513259710.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:10.700Z,1513259710.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:11.107Z,1513259711.107 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T13:55:11.107Z,1513259711.107 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:55:11.108Z,1513259711.108 [BPC1](ERROR): Data Fault
2017-12-14T13:55:11.117Z,1513259711.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:11.158Z,1513259711.158 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:55:11.507Z,1513259711.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:11.905Z,1513259711.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:12.351Z,1513259712.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:12.390Z,1513259712.390 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:55:12.390Z,1513259712.390 [BPC1] No Fault, FailCount= 1
2017-12-14T13:55:12.795Z,1513259712.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:13.123Z,1513259713.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:13.511Z,1513259713.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:13.910Z,1513259713.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:14.307Z,1513259714.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:14.711Z,1513259714.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:15.119Z,1513259715.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:15.535Z,1513259715.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:15.917Z,1513259715.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:16.322Z,1513259716.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:16.743Z,1513259716.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:17.090Z,1513259717.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:17.499Z,1513259717.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:17.899Z,1513259717.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:18.295Z,1513259718.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:18.752Z,1513259718.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:19.104Z,1513259719.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:19.529Z,1513259719.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:23.104Z,1513259723.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:23.232Z,1513259723.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:23.628Z,1513259723.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:24.019Z,1513259724.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:24.407Z,1513259724.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:24.804Z,1513259724.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:25.208Z,1513259725.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:25.601Z,1513259725.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:26.000Z,1513259726.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:26.404Z,1513259726.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:26.812Z,1513259726.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:27.240Z,1513259727.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:27.606Z,1513259727.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:28.007Z,1513259728.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:28.438Z,1513259728.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:28.854Z,1513259728.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:29.211Z,1513259729.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:29.604Z,1513259729.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:30.002Z,1513259730.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:30.404Z,1513259730.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:30.808Z,1513259730.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:31.206Z,1513259731.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:31.606Z,1513259731.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:32.007Z,1513259732.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:32.415Z,1513259732.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:32.826Z,1513259732.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:33.219Z,1513259733.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:33.608Z,1513259733.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:34.007Z,1513259734.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:34.425Z,1513259734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:34.842Z,1513259734.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:35.247Z,1513259735.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:35.601Z,1513259735.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:36.043Z,1513259736.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:36.429Z,1513259736.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:36.876Z,1513259736.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:37.230Z,1513259737.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:37.607Z,1513259737.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:38.060Z,1513259738.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:38.429Z,1513259738.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:38.841Z,1513259738.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:39.214Z,1513259739.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:39.601Z,1513259739.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:39.000Z,1513259740.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:40.421Z,1513259740.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:40.818Z,1513259740.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:41.214Z,1513259741.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:41.612Z,1513259741.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:42.005Z,1513259742.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:42.422Z,1513259742.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:42.818Z,1513259742.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:43.218Z,1513259743.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:43.606Z,1513259743.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:44.007Z,1513259744.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:44.454Z,1513259744.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:44.824Z,1513259744.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:45.240Z,1513259745.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:45.617Z,1513259745.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:45.996Z,1513259745.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:46.420Z,1513259746.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:46.822Z,1513259746.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:47.204Z,1513259747.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:47.682Z,1513259747.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:48.003Z,1513259748.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:48.429Z,1513259748.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:48.811Z,1513259748.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:49.211Z,1513259749.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:49.604Z,1513259749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:49.999Z,1513259749.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:50.415Z,1513259750.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:50.844Z,1513259750.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:51.216Z,1513259751.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:51.601Z,1513259751.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:52.011Z,1513259752.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:52.419Z,1513259752.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:52.819Z,1513259752.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:53.213Z,1513259753.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:53.602Z,1513259753.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:54.066Z,1513259754.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:54.427Z,1513259754.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:54.827Z,1513259754.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:55.219Z,1513259755.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:55.606Z,1513259755.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:56.007Z,1513259756.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:56.414Z,1513259756.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:56.816Z,1513259756.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:57.298Z,1513259757.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:57.623Z,1513259757.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:57.995Z,1513259757.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:58.447Z,1513259758.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:58.821Z,1513259758.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:59.239Z,1513259759.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:59.600Z,1513259759.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:55:59.996Z,1513259759.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:00.419Z,1513259760.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:00.804Z,1513259760.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:01.212Z,1513259761.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:01.603Z,1513259761.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:02.002Z,1513259762.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:02.406Z,1513259762.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:02.804Z,1513259762.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:03.211Z,1513259763.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:03.602Z,1513259763.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:03.000Z,1513259764.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:04.411Z,1513259764.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:04.806Z,1513259764.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:05.204Z,1513259765.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:05.602Z,1513259765.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:06.031Z,1513259766.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:06.411Z,1513259766.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:06.858Z,1513259766.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:07.237Z,1513259767.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:07.646Z,1513259767.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:08.007Z,1513259768.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:08.414Z,1513259768.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:08.819Z,1513259768.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:09.212Z,1513259769.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:09.611Z,1513259769.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:10.001Z,1513259770.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:10.409Z,1513259770.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:10.868Z,1513259770.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:11.218Z,1513259771.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:11.606Z,1513259771.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:12.054Z,1513259772.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:12.415Z,1513259772.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:12.828Z,1513259772.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:13.218Z,1513259773.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:13.603Z,1513259773.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:14.061Z,1513259774.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:14.423Z,1513259774.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:14.814Z,1513259774.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:15.223Z,1513259775.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:15.616Z,1513259775.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:16.010Z,1513259776.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:16.419Z,1513259776.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:16.819Z,1513259776.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:17.268Z,1513259777.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:17.609Z,1513259777.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:18.014Z,1513259778.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:18.411Z,1513259778.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:18.815Z,1513259778.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:19.224Z,1513259779.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:19.668Z,1513259779.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:26.945Z,1513259786.945 [BPC1](ERROR): Failed to receive battery data
2017-12-14T13:56:26.945Z,1513259786.945 [BPC1] Communications Fault, FailCount= 1
2017-12-14T13:56:26.945Z,1513259786.945 [BPC1](ERROR): Communications Fault
2017-12-14T13:56:26.959Z,1513259786.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:26.972Z,1513259786.972 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T13:56:27.148Z,1513259787.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:27.442Z,1513259787.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:27.852Z,1513259787.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:27.886Z,1513259787.886 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:56:27.886Z,1513259787.886 [BPC1] No Fault, FailCount= 1
2017-12-14T13:56:28.299Z,1513259788.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:28.650Z,1513259788.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:29.060Z,1513259789.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:29.470Z,1513259789.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:29.834Z,1513259789.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:30.246Z,1513259790.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:30.664Z,1513259790.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:31.079Z,1513259791.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:31.464Z,1513259791.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:31.847Z,1513259791.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:32.344Z,1513259792.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:32.671Z,1513259792.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:33.088Z,1513259793.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:33.512Z,1513259793.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:33.852Z,1513259793.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:34.314Z,1513259794.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:34.673Z,1513259794.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:35.043Z,1513259795.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:35.451Z,1513259795.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:35.881Z,1513259795.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:36.252Z,1513259796.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:36.683Z,1513259796.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:37.044Z,1513259797.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:37.457Z,1513259797.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:37.859Z,1513259797.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:38.282Z,1513259798.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:38.654Z,1513259798.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:39.051Z,1513259799.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:39.441Z,1513259799.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:39.873Z,1513259799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:40.328Z,1513259800.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:40.682Z,1513259800.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:41.083Z,1513259801.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:41.448Z,1513259801.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:41.859Z,1513259801.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:42.243Z,1513259802.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:42.655Z,1513259802.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:43.061Z,1513259803.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:43.482Z,1513259803.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:43.872Z,1513259803.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:44.278Z,1513259804.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:44.667Z,1513259804.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:45.038Z,1513259805.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:45.447Z,1513259805.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:45.907Z,1513259805.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:46.279Z,1513259806.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:46.675Z,1513259806.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:47.048Z,1513259807.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:47.455Z,1513259807.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:47.843Z,1513259807.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:48.260Z,1513259808.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:48.699Z,1513259808.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:49.041Z,1513259809.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:49.442Z,1513259809.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:49.892Z,1513259809.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:50.267Z,1513259810.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:50.687Z,1513259810.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:51.043Z,1513259811.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:51.440Z,1513259811.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:51.841Z,1513259811.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:52.259Z,1513259812.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:52.644Z,1513259812.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:53.098Z,1513259813.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:53.446Z,1513259813.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:53.846Z,1513259813.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:54.310Z,1513259814.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:54.638Z,1513259814.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:55.047Z,1513259815.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:55.455Z,1513259815.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:55.851Z,1513259815.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:56.248Z,1513259816.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:56.657Z,1513259816.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:57.048Z,1513259817.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:57.452Z,1513259817.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:57.827Z,1513259817.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:58.227Z,1513259818.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:58.654Z,1513259818.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:59.077Z,1513259819.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:59.460Z,1513259819.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:56:59.833Z,1513259819.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:00.265Z,1513259820.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:00.636Z,1513259820.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:01.028Z,1513259821.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:01.455Z,1513259821.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:01.908Z,1513259821.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:02.268Z,1513259822.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:02.673Z,1513259822.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:03.036Z,1513259823.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:03.429Z,1513259823.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:03.839Z,1513259823.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:04.272Z,1513259824.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:04.647Z,1513259824.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:05.040Z,1513259825.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:05.440Z,1513259825.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:05.876Z,1513259825.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:06.282Z,1513259826.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:06.639Z,1513259826.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:07.043Z,1513259827.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:07.449Z,1513259827.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:07.845Z,1513259827.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:08.309Z,1513259828.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:08.640Z,1513259828.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:09.100Z,1513259829.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:09.428Z,1513259829.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:09.832Z,1513259829.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:10.243Z,1513259830.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:10.660Z,1513259830.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:11.118Z,1513259831.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:11.452Z,1513259831.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:11.871Z,1513259831.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:12.270Z,1513259832.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:12.671Z,1513259832.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:13.030Z,1513259833.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:13.455Z,1513259833.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:13.850Z,1513259833.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:14.272Z,1513259834.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:14.646Z,1513259834.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:15.028Z,1513259835.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:15.475Z,1513259835.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:15.833Z,1513259835.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:16.263Z,1513259836.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:16.657Z,1513259836.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:17.035Z,1513259837.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:17.459Z,1513259837.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:17.831Z,1513259837.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:18.264Z,1513259838.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:18.659Z,1513259838.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:19.035Z,1513259839.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:19.460Z,1513259839.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:19.861Z,1513259839.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:23.440Z,1513259843.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:23.575Z,1513259843.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:23.932Z,1513259843.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:24.332Z,1513259844.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:24.735Z,1513259844.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:25.132Z,1513259845.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:25.561Z,1513259845.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:25.936Z,1513259845.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:26.359Z,1513259846.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:26.738Z,1513259846.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:27.139Z,1513259847.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:27.532Z,1513259847.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:27.932Z,1513259847.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:28.335Z,1513259848.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:28.758Z,1513259848.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:29.148Z,1513259849.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:29.540Z,1513259849.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:29.936Z,1513259849.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:30.340Z,1513259850.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:30.732Z,1513259850.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:31.142Z,1513259851.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:31.546Z,1513259851.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:31.980Z,1513259851.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:32.348Z,1513259852.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:32.743Z,1513259852.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:33.133Z,1513259853.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:33.539Z,1513259853.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:33.931Z,1513259853.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:34.335Z,1513259854.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:34.740Z,1513259854.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:35.183Z,1513259855.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:35.619Z,1513259855.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:35.948Z,1513259855.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:36.363Z,1513259856.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:36.728Z,1513259856.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:37.159Z,1513259857.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:37.553Z,1513259857.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:37.952Z,1513259857.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:38.376Z,1513259858.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:38.731Z,1513259858.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:39.126Z,1513259859.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:39.526Z,1513259859.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:39.934Z,1513259859.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:40.335Z,1513259860.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:40.759Z,1513259860.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:41.139Z,1513259861.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:41.563Z,1513259861.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:41.935Z,1513259861.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:42.331Z,1513259862.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:42.735Z,1513259862.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:43.131Z,1513259863.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:43.544Z,1513259863.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:43.936Z,1513259863.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:44.332Z,1513259864.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:44.763Z,1513259864.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:45.130Z,1513259865.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:45.570Z,1513259865.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:45.934Z,1513259865.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:46.335Z,1513259866.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:46.736Z,1513259866.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:47.137Z,1513259867.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:47.536Z,1513259867.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:47.966Z,1513259867.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:48.335Z,1513259868.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:48.738Z,1513259868.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:49.135Z,1513259869.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:49.551Z,1513259869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:49.947Z,1513259869.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:50.341Z,1513259870.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:50.740Z,1513259870.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:51.190Z,1513259871.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:51.542Z,1513259871.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:51.941Z,1513259871.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:52.342Z,1513259872.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:52.752Z,1513259872.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:53.150Z,1513259873.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:53.544Z,1513259873.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:53.943Z,1513259873.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:54.398Z,1513259874.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:54.748Z,1513259874.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:55.144Z,1513259875.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:55.546Z,1513259875.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:55.950Z,1513259875.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:56.347Z,1513259876.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:56.740Z,1513259876.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:57.147Z,1513259877.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:57.603Z,1513259877.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:57.935Z,1513259877.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:58.382Z,1513259878.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:58.747Z,1513259878.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:59.181Z,1513259879.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:59.550Z,1513259879.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:57:59.931Z,1513259879.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:00.339Z,1513259880.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:00.739Z,1513259880.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:00.739Z,1513259880.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 268
2017-12-14T13:58:00.739Z,1513259880.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T13:58:00.742Z,1513259880.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:00.742Z,1513259880.742 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 268
2017-12-14T13:58:00.742Z,1513259880.742 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T13:58:00.744Z,1513259880.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:00.744Z,1513259880.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 268
2017-12-14T13:58:00.744Z,1513259880.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T13:58:00.784Z,1513259880.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T13:58:00.784Z,1513259880.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T13:58:00.793Z,1513259880.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T13:58:01.164Z,1513259881.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T13:58:01.164Z,1513259881.164 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 268
2017-12-14T13:58:01.165Z,1513259881.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T13:58:01.165Z,1513259881.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 268
2017-12-14T13:58:01.166Z,1513259881.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T13:58:01.166Z,1513259881.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 268
2017-12-14T13:58:01.552Z,1513259881.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T13:58:01.552Z,1513259881.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:58:01.553Z,1513259881.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:58:01.565Z,1513259881.565 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T13:58:01.565Z,1513259881.565 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:58:01.566Z,1513259881.566 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:58:01.566Z,1513259881.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T13:58:01.566Z,1513259881.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T13:58:01.567Z,1513259881.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T13:58:01.954Z,1513259881.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:02.365Z,1513259882.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:02.741Z,1513259882.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:03.135Z,1513259883.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:03.535Z,1513259883.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:03.935Z,1513259883.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:04.339Z,1513259884.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:04.744Z,1513259884.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:05.157Z,1513259885.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:05.549Z,1513259885.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:05.937Z,1513259885.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:06.338Z,1513259886.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:06.737Z,1513259886.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:07.213Z,1513259887.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:07.549Z,1513259887.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:07.951Z,1513259887.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:08.346Z,1513259888.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:08.738Z,1513259888.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:09.147Z,1513259889.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:09.549Z,1513259889.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:10.003Z,1513259890.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:10.388Z,1513259890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:10.747Z,1513259890.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:11.147Z,1513259891.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:11.552Z,1513259891.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:11.948Z,1513259891.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:12.323Z,1513259892.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:12.748Z,1513259892.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:13.154Z,1513259893.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:13.645Z,1513259893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:13.949Z,1513259893.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:14.343Z,1513259894.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:14.748Z,1513259894.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:15.123Z,1513259895.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:15.532Z,1513259895.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:15.980Z,1513259895.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:16.348Z,1513259896.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:16.768Z,1513259896.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:17.164Z,1513259897.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:17.543Z,1513259897.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:17.933Z,1513259897.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:18.340Z,1513259898.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:18.735Z,1513259898.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:19.190Z,1513259899.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:19.193Z,1513259899.193 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T13:58:19.193Z,1513259899.193 [Default:CheckIn:C.Wait] Stopped
2017-12-14T13:58:19.193Z,1513259899.193 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T13:58:19.193Z,1513259899.193 [Default:CheckIn:D] Running Loop=1
2017-12-14T13:58:19.572Z,1513259899.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:19.575Z,1513259899.575 [Default:CheckIn:D] Stopped
2017-12-14T13:58:19.575Z,1513259899.575 [Default:CheckIn:E] Running Loop=1
2017-12-14T13:58:19.943Z,1513259899.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:19.947Z,1513259899.947 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 805.069727 min 
2017-12-14T13:58:19.947Z,1513259899.947 [Default:CheckIn:E] Stopped
2017-12-14T13:58:19.947Z,1513259899.947 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn] Stopped
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn](INFO): Running loop #78
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn] Running Loop=78
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T13:58:19.948Z,1513259899.948 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T13:58:23.673Z,1513259903.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:23.791Z,1513259903.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:24.238Z,1513259904.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:24.567Z,1513259904.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:24.956Z,1513259904.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:25.355Z,1513259905.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:25.792Z,1513259905.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:26.245Z,1513259906.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:26.572Z,1513259906.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:26.995Z,1513259906.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:27.349Z,1513259907.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:27.778Z,1513259907.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:28.222Z,1513259908.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:28.551Z,1513259908.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:28.980Z,1513259908.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:29.355Z,1513259909.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:29.749Z,1513259909.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:30.222Z,1513259910.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:30.575Z,1513259910.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:30.959Z,1513259910.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:31.350Z,1513259911.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:31.767Z,1513259911.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:32.163Z,1513259912.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:32.618Z,1513259912.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:32.964Z,1513259912.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:33.379Z,1513259913.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:33.755Z,1513259913.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:34.154Z,1513259914.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:34.632Z,1513259914.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:34.956Z,1513259914.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:35.359Z,1513259915.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:35.755Z,1513259915.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:36.149Z,1513259916.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:36.655Z,1513259916.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:36.953Z,1513259916.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:37.359Z,1513259917.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:37.763Z,1513259917.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:38.231Z,1513259918.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:38.575Z,1513259918.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:38.966Z,1513259918.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:39.355Z,1513259919.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:39.799Z,1513259919.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:40.223Z,1513259920.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:40.587Z,1513259920.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:40.956Z,1513259920.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:41.352Z,1513259921.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:41.767Z,1513259921.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:42.227Z,1513259922.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:42.585Z,1513259922.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:42.979Z,1513259922.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:43.371Z,1513259923.371 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T13:58:43.371Z,1513259923.371 [BPC1] Data Fault, FailCount= 1
2017-12-14T13:58:43.371Z,1513259923.371 [BPC1](ERROR): Data Fault
2017-12-14T13:58:43.383Z,1513259923.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:43.420Z,1513259923.420 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T13:58:43.775Z,1513259923.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:44.227Z,1513259924.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:44.550Z,1513259924.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:44.584Z,1513259924.584 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T13:58:44.584Z,1513259924.584 [BPC1] No Fault, FailCount= 1
2017-12-14T13:58:45.011Z,1513259925.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:45.354Z,1513259925.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:45.756Z,1513259925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:46.256Z,1513259926.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:46.571Z,1513259926.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:46.963Z,1513259926.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:47.365Z,1513259927.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:47.744Z,1513259927.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:48.150Z,1513259928.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:48.618Z,1513259928.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:48.969Z,1513259928.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:49.427Z,1513259929.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:49.775Z,1513259929.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:50.158Z,1513259930.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:50.610Z,1513259930.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:50.964Z,1513259930.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:51.371Z,1513259931.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:51.776Z,1513259931.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:52.226Z,1513259932.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:52.589Z,1513259932.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:52.960Z,1513259932.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:53.392Z,1513259933.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:53.757Z,1513259933.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:54.230Z,1513259934.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:54.571Z,1513259934.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:55.006Z,1513259935.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:55.353Z,1513259935.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:55.787Z,1513259935.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:56.210Z,1513259936.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:56.582Z,1513259936.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:56.953Z,1513259936.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:57.382Z,1513259937.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:57.757Z,1513259937.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:58.279Z,1513259938.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:58.560Z,1513259938.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:58.951Z,1513259938.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:59.356Z,1513259939.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:58:59.759Z,1513259939.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:00.160Z,1513259940.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:00.564Z,1513259940.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:01.023Z,1513259941.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:01.357Z,1513259941.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:01.757Z,1513259941.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:02.175Z,1513259942.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:02.612Z,1513259942.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:03.012Z,1513259943.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:03.364Z,1513259943.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:03.747Z,1513259943.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:04.192Z,1513259944.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:04.600Z,1513259944.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:04.949Z,1513259944.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:05.397Z,1513259945.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:05.777Z,1513259945.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:06.252Z,1513259946.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:06.567Z,1513259946.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:06.979Z,1513259946.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:07.363Z,1513259947.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:07.762Z,1513259947.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:08.233Z,1513259948.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:08.575Z,1513259948.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:08.963Z,1513259948.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:09.354Z,1513259949.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:09.752Z,1513259949.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:10.232Z,1513259950.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:10.579Z,1513259950.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:10.957Z,1513259950.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:11.356Z,1513259951.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:11.759Z,1513259951.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:12.223Z,1513259952.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:12.571Z,1513259952.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:12.975Z,1513259952.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:13.361Z,1513259953.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:13.756Z,1513259953.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:14.171Z,1513259954.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:14.580Z,1513259954.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:14.950Z,1513259954.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:15.387Z,1513259955.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:15.799Z,1513259955.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:16.155Z,1513259956.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:16.605Z,1513259956.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:16.978Z,1513259956.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:17.383Z,1513259957.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:17.755Z,1513259957.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:18.149Z,1513259958.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:18.614Z,1513259958.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:19.005Z,1513259959.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:19.366Z,1513259959.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:19.768Z,1513259959.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:19.781Z,1513259959.781 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T13:59:20.237Z,1513259960.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:23.556Z,1513259963.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:23.699Z,1513259963.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:24.078Z,1513259964.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:24.465Z,1513259964.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:24.887Z,1513259964.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:25.267Z,1513259965.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:25.671Z,1513259965.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:26.107Z,1513259966.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:26.479Z,1513259966.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:26.869Z,1513259966.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:27.279Z,1513259967.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:27.703Z,1513259967.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:28.069Z,1513259968.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:28.468Z,1513259968.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:28.927Z,1513259968.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:29.266Z,1513259969.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:29.676Z,1513259969.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:30.075Z,1513259970.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:30.494Z,1513259970.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:30.855Z,1513259970.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:31.254Z,1513259971.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:31.742Z,1513259971.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:32.052Z,1513259972.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:32.502Z,1513259972.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:32.868Z,1513259972.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:33.275Z,1513259973.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:33.660Z,1513259973.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:34.057Z,1513259974.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:34.455Z,1513259974.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:34.905Z,1513259974.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:35.268Z,1513259975.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:35.668Z,1513259975.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:36.087Z,1513259976.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:36.464Z,1513259976.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:36.862Z,1513259976.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:37.276Z,1513259977.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:37.651Z,1513259977.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:38.198Z,1513259978.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:38.463Z,1513259978.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:38.860Z,1513259978.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:39.260Z,1513259979.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:39.663Z,1513259979.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:40.056Z,1513259980.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:40.453Z,1513259980.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:40.868Z,1513259980.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:41.259Z,1513259981.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:41.664Z,1513259981.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:42.088Z,1513259982.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:42.473Z,1513259982.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:42.856Z,1513259982.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:43.255Z,1513259983.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:43.659Z,1513259983.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:44.050Z,1513259984.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:44.562Z,1513259984.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:44.875Z,1513259984.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:45.218Z,1513259985.218 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T13:59:45.218Z,1513259985.218 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T13:59:45.218Z,1513259985.218 [DropWeight](ERROR): Hardware Fault
2017-12-14T13:59:45.306Z,1513259985.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:45.326Z,1513259985.326 [CBIT](INFO): Critical error at 20171214T135945
2017-12-14T13:59:45.328Z,1513259985.328 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T13:59:45.333Z,1513259985.333 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T13:59:45.654Z,1513259985.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:45.666Z,1513259985.666 [CBIT](INFO): Critical error at 20171214T135945
2017-12-14T13:59:46.065Z,1513259986.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:46.459Z,1513259986.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:46.847Z,1513259986.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:47.246Z,1513259987.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:47.671Z,1513259987.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:48.076Z,1513259988.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:48.522Z,1513259988.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:48.861Z,1513259988.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:49.259Z,1513259989.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:49.666Z,1513259989.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:50.082Z,1513259990.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:50.464Z,1513259990.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:50.940Z,1513259990.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:51.291Z,1513259991.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:51.656Z,1513259991.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:52.084Z,1513259992.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:52.460Z,1513259992.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:52.863Z,1513259992.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:53.276Z,1513259993.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:53.670Z,1513259993.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:54.091Z,1513259994.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:54.464Z,1513259994.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:54.859Z,1513259994.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:55.258Z,1513259995.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:55.658Z,1513259995.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:56.059Z,1513259996.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:56.459Z,1513259996.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:56.859Z,1513259996.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:57.267Z,1513259997.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:57.655Z,1513259997.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:58.062Z,1513259998.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:58.459Z,1513259998.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:58.856Z,1513259998.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:59.263Z,1513259999.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T13:59:59.671Z,1513259999.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:00.068Z,1513260000.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:00.611Z,1513260000.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:00.856Z,1513260000.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:01.259Z,1513260001.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:01.656Z,1513260001.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:02.056Z,1513260002.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:02.468Z,1513260002.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:02.880Z,1513260002.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:03.260Z,1513260003.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:03.654Z,1513260003.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:04.054Z,1513260004.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:04.455Z,1513260004.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:04.867Z,1513260004.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:05.256Z,1513260005.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:05.663Z,1513260005.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:06.065Z,1513260006.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:06.471Z,1513260006.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:06.891Z,1513260006.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:07.268Z,1513260007.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:07.660Z,1513260007.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:08.059Z,1513260008.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:08.467Z,1513260008.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:08.876Z,1513260008.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:09.279Z,1513260009.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:09.663Z,1513260009.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:10.132Z,1513260010.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:10.454Z,1513260010.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:10.867Z,1513260010.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:11.298Z,1513260011.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:11.683Z,1513260011.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:12.060Z,1513260012.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:12.460Z,1513260012.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:12.898Z,1513260012.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:13.254Z,1513260013.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:13.659Z,1513260013.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:14.106Z,1513260014.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:14.554Z,1513260014.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:14.910Z,1513260014.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:15.275Z,1513260015.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:15.665Z,1513260015.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:16.069Z,1513260016.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:16.451Z,1513260016.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:16.859Z,1513260016.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:17.254Z,1513260017.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:17.664Z,1513260017.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:18.068Z,1513260018.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:18.472Z,1513260018.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:18.863Z,1513260018.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:19.258Z,1513260019.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:19.655Z,1513260019.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:20.061Z,1513260020.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:20.550Z,1513260020.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:23.888Z,1513260023.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:24.035Z,1513260024.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:24.383Z,1513260024.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:24.795Z,1513260024.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:25.185Z,1513260025.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:25.589Z,1513260025.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:25.992Z,1513260025.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:26.399Z,1513260026.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:26.780Z,1513260026.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:27.218Z,1513260027.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:27.586Z,1513260027.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:27.980Z,1513260027.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:28.388Z,1513260028.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:28.791Z,1513260028.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:29.199Z,1513260029.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:29.586Z,1513260029.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:30.027Z,1513260030.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:30.390Z,1513260030.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:30.800Z,1513260030.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:31.193Z,1513260031.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:31.587Z,1513260031.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:31.993Z,1513260031.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:32.399Z,1513260032.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:32.807Z,1513260032.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:33.204Z,1513260033.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:33.595Z,1513260033.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:34.003Z,1513260034.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:34.408Z,1513260034.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:34.803Z,1513260034.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:35.223Z,1513260035.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:35.576Z,1513260035.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:36.019Z,1513260036.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:36.424Z,1513260036.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:36.848Z,1513260036.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:37.181Z,1513260037.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:37.608Z,1513260037.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:37.980Z,1513260037.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:38.387Z,1513260038.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:38.810Z,1513260038.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:39.220Z,1513260039.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:39.617Z,1513260039.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:39.987Z,1513260039.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:40.393Z,1513260040.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:40.799Z,1513260040.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:41.193Z,1513260041.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:41.582Z,1513260041.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:41.982Z,1513260041.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:42.389Z,1513260042.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:42.824Z,1513260042.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:43.192Z,1513260043.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:43.599Z,1513260043.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:43.722Z,1513260043.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:00:43.999Z,1513260043.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:44.392Z,1513260044.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:44.517Z,1513260044.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:00:44.835Z,1513260044.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:45.198Z,1513260045.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:45.589Z,1513260045.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:46.059Z,1513260046.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:46.385Z,1513260046.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:46.784Z,1513260046.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:47.184Z,1513260047.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:47.591Z,1513260047.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:47.987Z,1513260047.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:48.391Z,1513260048.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:48.788Z,1513260048.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:49.191Z,1513260049.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:49.587Z,1513260049.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:49.983Z,1513260049.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:50.395Z,1513260050.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:50.795Z,1513260050.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:51.192Z,1513260051.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:51.584Z,1513260051.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:51.978Z,1513260051.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:52.430Z,1513260052.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:52.799Z,1513260052.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:53.187Z,1513260053.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:53.583Z,1513260053.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:53.987Z,1513260053.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:54.395Z,1513260054.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:54.794Z,1513260054.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:55.192Z,1513260055.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:55.629Z,1513260055.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:55.982Z,1513260055.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:56.407Z,1513260056.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:56.839Z,1513260056.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:57.195Z,1513260057.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:57.584Z,1513260057.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:58.008Z,1513260058.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:58.399Z,1513260058.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:58.855Z,1513260058.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:59.207Z,1513260059.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:59.610Z,1513260059.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:00:59.971Z,1513260059.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:00.391Z,1513260060.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:00.844Z,1513260060.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:01.199Z,1513260061.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:01.574Z,1513260061.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:01.574Z,1513260061.574 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 269
2017-12-14T14:01:01.574Z,1513260061.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:01:01.576Z,1513260061.576 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:01.576Z,1513260061.576 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 269
2017-12-14T14:01:01.576Z,1513260061.576 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:01:01.594Z,1513260061.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:01.594Z,1513260061.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 269
2017-12-14T14:01:01.594Z,1513260061.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:01:01.629Z,1513260061.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:01:01.629Z,1513260061.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:01:01.629Z,1513260061.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:01:02.045Z,1513260062.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:01:02.046Z,1513260062.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 269
2017-12-14T14:01:02.046Z,1513260062.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:01:02.046Z,1513260062.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 269
2017-12-14T14:01:02.047Z,1513260062.047 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:01:02.047Z,1513260062.047 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 269
2017-12-14T14:01:02.390Z,1513260062.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:01:02.390Z,1513260062.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:01:02.391Z,1513260062.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:01:02.391Z,1513260062.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:01:02.391Z,1513260062.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:01:02.392Z,1513260062.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:01:02.392Z,1513260062.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:01:02.392Z,1513260062.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:01:02.393Z,1513260062.393 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:01:02.800Z,1513260062.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:03.195Z,1513260063.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:03.579Z,1513260063.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:03.983Z,1513260063.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:04.390Z,1513260064.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:04.792Z,1513260064.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:05.190Z,1513260065.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:05.572Z,1513260065.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:05.997Z,1513260065.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:06.417Z,1513260066.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:06.798Z,1513260066.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:07.199Z,1513260067.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:07.598Z,1513260067.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:08.004Z,1513260068.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:08.421Z,1513260068.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:08.809Z,1513260068.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:09.194Z,1513260069.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:09.586Z,1513260069.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:09.742Z,1513260069.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:09.981Z,1513260069.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:10.411Z,1513260070.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:10.538Z,1513260070.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:10.815Z,1513260070.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:10.941Z,1513260070.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:11.200Z,1513260071.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:11.706Z,1513260071.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:11.738Z,1513260071.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:11.999Z,1513260071.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:12.404Z,1513260072.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:12.533Z,1513260072.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:12.811Z,1513260072.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:12.937Z,1513260072.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:13.198Z,1513260073.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:13.604Z,1513260073.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:13.736Z,1513260073.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:13.982Z,1513260073.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:14.407Z,1513260074.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:14.529Z,1513260074.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:14.805Z,1513260074.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:14.934Z,1513260074.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:15.192Z,1513260075.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:15.579Z,1513260075.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:15.730Z,1513260075.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:15.983Z,1513260075.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:16.395Z,1513260076.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:16.525Z,1513260076.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:16.803Z,1513260076.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:16.931Z,1513260076.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:17.203Z,1513260077.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:17.579Z,1513260077.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:17.726Z,1513260077.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:18.027Z,1513260078.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:18.423Z,1513260078.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:18.522Z,1513260078.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:18.795Z,1513260078.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:18.929Z,1513260078.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:19.188Z,1513260079.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:19.579Z,1513260079.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:19.984Z,1513260079.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:20.424Z,1513260080.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:20.793Z,1513260080.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:23.734Z,1513260083.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:24.270Z,1513260084.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:24.418Z,1513260084.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:24.531Z,1513260084.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:24.787Z,1513260084.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:24.945Z,1513260084.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:25.152Z,1513260085.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:25.559Z,1513260085.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:25.742Z,1513260085.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:25.952Z,1513260085.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:26.351Z,1513260086.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:26.537Z,1513260086.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:26.744Z,1513260086.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:26.941Z,1513260086.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:27.146Z,1513260087.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:27.547Z,1513260087.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:27.738Z,1513260087.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:27.951Z,1513260087.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:28.352Z,1513260088.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:28.533Z,1513260088.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:28.753Z,1513260088.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:28.937Z,1513260088.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:29.160Z,1513260089.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:29.556Z,1513260089.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:29.733Z,1513260089.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:29.948Z,1513260089.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:30.344Z,1513260090.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:30.529Z,1513260090.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:30.755Z,1513260090.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:30.933Z,1513260090.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:31.144Z,1513260091.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:31.553Z,1513260091.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:31.730Z,1513260091.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:31.956Z,1513260091.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:32.359Z,1513260092.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:32.526Z,1513260092.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:32.751Z,1513260092.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:32.929Z,1513260092.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:33.188Z,1513260093.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:33.543Z,1513260093.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:33.980Z,1513260093.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:34.347Z,1513260094.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:34.759Z,1513260094.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:35.167Z,1513260095.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:35.563Z,1513260095.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:35.946Z,1513260095.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:36.349Z,1513260096.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:36.754Z,1513260096.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:37.166Z,1513260097.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:37.554Z,1513260097.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:37.727Z,1513260097.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:37.955Z,1513260097.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:38.358Z,1513260098.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:38.523Z,1513260098.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:38.751Z,1513260098.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:38.929Z,1513260098.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:39.151Z,1513260099.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:39.551Z,1513260099.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:39.726Z,1513260099.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:39.949Z,1513260099.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:40.396Z,1513260100.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:40.521Z,1513260100.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:40.760Z,1513260100.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:40.926Z,1513260100.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:41.163Z,1513260101.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:41.555Z,1513260101.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:41.722Z,1513260101.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:41.958Z,1513260101.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:42.356Z,1513260102.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:42.519Z,1513260102.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:42.754Z,1513260102.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:42.929Z,1513260102.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:43.151Z,1513260103.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:43.568Z,1513260103.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:43.726Z,1513260103.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:43.963Z,1513260103.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:44.359Z,1513260104.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:44.521Z,1513260104.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:44.755Z,1513260104.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:44.925Z,1513260104.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:45.211Z,1513260105.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:45.567Z,1513260105.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:45.724Z,1513260105.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:45.979Z,1513260105.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:46.339Z,1513260106.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:46.521Z,1513260106.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:46.803Z,1513260106.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:46.926Z,1513260106.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:47.171Z,1513260107.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:47.565Z,1513260107.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:47.943Z,1513260107.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:48.348Z,1513260108.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:48.790Z,1513260108.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:49.158Z,1513260109.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:49.564Z,1513260109.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:49.718Z,1513260109.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:49.998Z,1513260109.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:50.363Z,1513260110.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:50.515Z,1513260110.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:50.763Z,1513260110.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:50.936Z,1513260110.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:51.154Z,1513260111.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:51.558Z,1513260111.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:51.730Z,1513260111.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:51.955Z,1513260111.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:52.355Z,1513260112.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:52.527Z,1513260112.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:52.767Z,1513260112.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:52.933Z,1513260112.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:53.176Z,1513260113.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:53.567Z,1513260113.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:53.730Z,1513260113.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:53.934Z,1513260113.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:54.363Z,1513260114.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:54.526Z,1513260114.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:54.742Z,1513260114.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:54.929Z,1513260114.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:55.171Z,1513260115.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:55.570Z,1513260115.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:55.726Z,1513260115.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:55.956Z,1513260115.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:56.398Z,1513260116.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:56.522Z,1513260116.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:56.741Z,1513260116.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:56.926Z,1513260116.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:57.144Z,1513260117.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:57.542Z,1513260117.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:57.722Z,1513260117.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:57.944Z,1513260117.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:58.347Z,1513260118.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:58.518Z,1513260118.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:58.746Z,1513260118.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:58.929Z,1513260118.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:59.174Z,1513260119.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:59.585Z,1513260119.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:01:59.726Z,1513260119.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:01:59.941Z,1513260119.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:00.342Z,1513260120.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:00.521Z,1513260120.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:00.796Z,1513260120.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:01.146Z,1513260121.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:01.148Z,1513260121.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:01.550Z,1513260121.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:01.942Z,1513260121.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:01.954Z,1513260121.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:02.351Z,1513260122.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:02.630Z,1513260122.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:02.827Z,1513260122.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:03.149Z,1513260123.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:03.425Z,1513260123.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:03.543Z,1513260123.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:03.943Z,1513260123.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:04.222Z,1513260124.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:04.340Z,1513260124.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:04.761Z,1513260124.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:04.913Z,1513260124.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:05.161Z,1513260125.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:05.557Z,1513260125.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:05.710Z,1513260125.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:05.982Z,1513260125.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:06.342Z,1513260126.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:06.507Z,1513260126.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:06.743Z,1513260126.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:06.915Z,1513260126.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:07.205Z,1513260127.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:07.563Z,1513260127.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:07.710Z,1513260127.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:07.979Z,1513260127.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:08.360Z,1513260128.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:08.506Z,1513260128.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:08.767Z,1513260128.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:08.913Z,1513260128.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:09.166Z,1513260129.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:09.563Z,1513260129.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:09.709Z,1513260129.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:09.951Z,1513260129.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:10.343Z,1513260130.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:10.506Z,1513260130.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:10.752Z,1513260130.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:10.910Z,1513260130.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:11.159Z,1513260131.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:11.553Z,1513260131.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:11.707Z,1513260131.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:11.943Z,1513260131.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:12.392Z,1513260132.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:12.502Z,1513260132.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:12.755Z,1513260132.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:12.905Z,1513260132.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:13.143Z,1513260133.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:13.563Z,1513260133.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:13.704Z,1513260133.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:13.960Z,1513260133.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:14.354Z,1513260134.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:14.497Z,1513260134.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:14.759Z,1513260134.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:14.901Z,1513260134.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:15.153Z,1513260135.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:15.591Z,1513260135.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:15.698Z,1513260135.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:15.953Z,1513260135.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:16.355Z,1513260136.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:16.493Z,1513260136.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:16.763Z,1513260136.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:16.898Z,1513260136.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:17.202Z,1513260137.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:17.555Z,1513260137.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:17.693Z,1513260137.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:17.955Z,1513260137.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:18.353Z,1513260138.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:18.491Z,1513260138.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:18.817Z,1513260138.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:18.934Z,1513260138.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:19.163Z,1513260139.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:19.567Z,1513260139.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:19.730Z,1513260139.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:19.967Z,1513260139.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:20.364Z,1513260140.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:20.527Z,1513260140.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:20.735Z,1513260140.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:20.933Z,1513260140.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:21.139Z,1513260141.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:21.730Z,1513260141.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:22.526Z,1513260142.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:22.929Z,1513260142.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:23.725Z,1513260143.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:24.521Z,1513260144.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:24.776Z,1513260144.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:24.918Z,1513260144.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:24.925Z,1513260144.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:25.270Z,1513260145.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:25.665Z,1513260145.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:25.724Z,1513260145.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:26.071Z,1513260146.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:26.448Z,1513260146.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:26.521Z,1513260146.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:26.845Z,1513260146.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:26.925Z,1513260146.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:27.250Z,1513260147.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:27.676Z,1513260147.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:27.722Z,1513260147.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:28.073Z,1513260148.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:28.482Z,1513260148.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:28.518Z,1513260148.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:28.863Z,1513260148.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:28.923Z,1513260148.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:29.298Z,1513260149.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:29.647Z,1513260149.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:29.718Z,1513260149.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:30.052Z,1513260150.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:30.457Z,1513260150.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:30.513Z,1513260150.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:30.871Z,1513260150.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:30.917Z,1513260150.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:31.260Z,1513260151.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:31.714Z,1513260151.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:31.716Z,1513260151.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:32.052Z,1513260152.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:32.430Z,1513260152.430 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:02:32.430Z,1513260152.430 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:02:32.430Z,1513260152.430 [BPC1](ERROR): Communications Fault
2017-12-14T14:02:32.450Z,1513260152.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:32.512Z,1513260152.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:32.552Z,1513260152.552 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:02:32.848Z,1513260152.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:32.937Z,1513260152.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:33.247Z,1513260153.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:33.670Z,1513260153.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:33.691Z,1513260153.691 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:02:33.691Z,1513260153.691 [BPC1] No Fault, FailCount= 1
2017-12-14T14:02:33.734Z,1513260153.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:34.104Z,1513260154.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:34.463Z,1513260154.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:34.531Z,1513260154.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:34.912Z,1513260154.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:34.945Z,1513260154.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:35.262Z,1513260155.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:35.643Z,1513260155.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:35.742Z,1513260155.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:36.042Z,1513260156.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:36.471Z,1513260156.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:36.537Z,1513260156.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:36.865Z,1513260156.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:36.941Z,1513260156.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:37.262Z,1513260157.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:37.644Z,1513260157.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:37.738Z,1513260157.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:38.075Z,1513260158.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:38.455Z,1513260158.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:38.533Z,1513260158.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:38.847Z,1513260158.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:38.937Z,1513260158.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:39.242Z,1513260159.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:39.652Z,1513260159.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:39.733Z,1513260159.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:40.052Z,1513260160.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:40.455Z,1513260160.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:40.529Z,1513260160.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:40.911Z,1513260160.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:40.933Z,1513260160.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:41.250Z,1513260161.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:41.647Z,1513260161.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:41.730Z,1513260161.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:42.055Z,1513260162.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:42.504Z,1513260162.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:42.553Z,1513260162.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:42.861Z,1513260162.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:42.958Z,1513260162.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:43.271Z,1513260163.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:43.651Z,1513260163.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:43.753Z,1513260163.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:44.051Z,1513260164.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:44.517Z,1513260164.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:44.549Z,1513260164.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:44.859Z,1513260164.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:44.953Z,1513260164.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:45.251Z,1513260165.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:45.657Z,1513260165.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:45.749Z,1513260165.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:46.058Z,1513260166.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:46.495Z,1513260166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:46.545Z,1513260166.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:46.844Z,1513260166.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:46.949Z,1513260166.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:47.242Z,1513260167.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:47.680Z,1513260167.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:47.746Z,1513260167.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:48.046Z,1513260168.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:48.529Z,1513260168.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:48.541Z,1513260168.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:48.861Z,1513260168.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:48.945Z,1513260168.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:49.257Z,1513260169.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:49.647Z,1513260169.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:49.741Z,1513260169.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:50.051Z,1513260170.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:50.446Z,1513260170.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:50.538Z,1513260170.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:50.911Z,1513260170.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:50.941Z,1513260170.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:51.253Z,1513260171.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:51.656Z,1513260171.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:51.737Z,1513260171.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:52.060Z,1513260172.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:52.448Z,1513260172.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:52.533Z,1513260172.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:52.928Z,1513260172.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:52.937Z,1513260172.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:53.294Z,1513260173.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:53.648Z,1513260173.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:53.734Z,1513260173.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:54.098Z,1513260174.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:54.487Z,1513260174.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:54.530Z,1513260174.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:54.870Z,1513260174.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:54.933Z,1513260174.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:55.291Z,1513260175.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:55.651Z,1513260175.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:55.729Z,1513260175.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:56.054Z,1513260176.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:56.445Z,1513260176.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:56.526Z,1513260176.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:56.855Z,1513260176.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:56.929Z,1513260176.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:57.253Z,1513260177.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:57.692Z,1513260177.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:57.742Z,1513260177.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:58.061Z,1513260178.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:58.471Z,1513260178.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:58.537Z,1513260178.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:58.852Z,1513260178.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:58.941Z,1513260178.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:02:59.257Z,1513260179.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:59.651Z,1513260179.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:02:59.738Z,1513260179.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:00.055Z,1513260180.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:00.534Z,1513260180.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:00.582Z,1513260180.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:00.887Z,1513260180.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:00.945Z,1513260180.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:01.262Z,1513260181.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:01.661Z,1513260181.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:01.743Z,1513260181.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:02.059Z,1513260182.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:02.460Z,1513260182.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:02.537Z,1513260182.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:02.848Z,1513260182.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:02.941Z,1513260182.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:03.283Z,1513260183.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:03.692Z,1513260183.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:03.738Z,1513260183.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:04.060Z,1513260184.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:04.458Z,1513260184.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:04.534Z,1513260184.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:04.857Z,1513260184.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:04.937Z,1513260184.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:05.251Z,1513260185.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:05.652Z,1513260185.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:05.734Z,1513260185.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:06.051Z,1513260186.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:06.460Z,1513260186.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:06.529Z,1513260186.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:06.898Z,1513260186.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:06.933Z,1513260186.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:07.260Z,1513260187.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:07.653Z,1513260187.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:07.729Z,1513260187.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:08.063Z,1513260188.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:08.465Z,1513260188.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:08.525Z,1513260188.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:08.866Z,1513260188.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:08.929Z,1513260188.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:09.240Z,1513260189.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:09.664Z,1513260189.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:09.726Z,1513260189.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:10.115Z,1513260190.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:10.478Z,1513260190.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:10.522Z,1513260190.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:10.848Z,1513260190.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:10.929Z,1513260190.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:11.247Z,1513260191.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:11.648Z,1513260191.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:11.726Z,1513260191.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:12.048Z,1513260192.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:12.455Z,1513260192.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:12.521Z,1513260192.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:12.852Z,1513260192.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:12.925Z,1513260192.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:13.252Z,1513260193.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:13.659Z,1513260193.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:13.723Z,1513260193.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:14.055Z,1513260194.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:14.519Z,1513260194.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:14.545Z,1513260194.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:14.838Z,1513260194.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:14.941Z,1513260194.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:15.246Z,1513260195.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:15.700Z,1513260195.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:15.738Z,1513260195.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:16.068Z,1513260196.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:16.534Z,1513260196.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:16.552Z,1513260196.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:16.848Z,1513260196.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:16.941Z,1513260196.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:17.272Z,1513260197.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:17.652Z,1513260197.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:17.738Z,1513260197.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:18.047Z,1513260198.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:18.484Z,1513260198.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:18.533Z,1513260198.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:18.864Z,1513260198.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:18.937Z,1513260198.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:19.264Z,1513260199.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:19.651Z,1513260199.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:19.734Z,1513260199.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:20.046Z,1513260200.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:20.049Z,1513260200.049 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T13:58:19.9Z
2017-12-14T14:03:20.049Z,1513260200.049 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:03:20.049Z,1513260200.049 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:03:20.451Z,1513260200.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:20.530Z,1513260200.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:20.933Z,1513260200.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:21.222Z,1513260201.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:21.349Z,1513260201.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:21.730Z,1513260201.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:22.529Z,1513260202.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:22.933Z,1513260202.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:23.730Z,1513260203.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:24.528Z,1513260204.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:24.933Z,1513260204.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:24.972Z,1513260204.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:25.066Z,1513260205.066 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0312.lzma
2017-12-14T14:03:25.177Z,1513260205.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:25.507Z,1513260205.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:25.729Z,1513260205.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:25.821Z,1513260205.821 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0312.lzma.bak
2017-12-14T14:03:25.821Z,1513260205.821 [DataOverHttps](INFO): SBD MOMSN=5438903
2017-12-14T14:03:25.875Z,1513260205.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:26.526Z,1513260206.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:26.929Z,1513260206.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:27.059Z,1513260207.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:27.206Z,1513260207.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:27.726Z,1513260207.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:28.523Z,1513260208.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:28.933Z,1513260208.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:29.730Z,1513260209.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:30.527Z,1513260210.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:30.735Z,1513260210.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:30.883Z,1513260210.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:30.933Z,1513260210.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:31.257Z,1513260211.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:31.638Z,1513260211.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:31.729Z,1513260211.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:32.036Z,1513260212.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:32.462Z,1513260212.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:32.525Z,1513260212.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:32.929Z,1513260212.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:33.726Z,1513260213.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:34.523Z,1513260214.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:34.929Z,1513260214.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:35.726Z,1513260215.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:36.109Z,1513260216.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:36.231Z,1513260216.231 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0313.lzma
2017-12-14T14:03:36.323Z,1513260216.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:36.521Z,1513260216.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:36.691Z,1513260216.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:36.925Z,1513260216.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:37.027Z,1513260217.027 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0313.lzma.bak
2017-12-14T14:03:37.027Z,1513260217.027 [DataOverHttps](INFO): SBD MOMSN=5438911
2017-12-14T14:03:37.095Z,1513260217.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:37.723Z,1513260217.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:38.315Z,1513260218.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:38.334Z,1513260218.334 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:03:38.334Z,1513260218.334 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:03:38.334Z,1513260218.334 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:03:38.463Z,1513260218.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:38.517Z,1513260218.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:38.921Z,1513260218.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:39.718Z,1513260219.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:40.513Z,1513260220.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:40.919Z,1513260220.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:41.714Z,1513260221.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:41.975Z,1513260221.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:42.106Z,1513260222.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:42.511Z,1513260222.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:42.594Z,1513260222.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:42.898Z,1513260222.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:42.941Z,1513260222.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:43.272Z,1513260223.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:43.671Z,1513260223.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:43.738Z,1513260223.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:44.069Z,1513260224.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:44.534Z,1513260224.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:44.542Z,1513260224.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:44.877Z,1513260224.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:44.941Z,1513260224.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:45.280Z,1513260225.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:45.680Z,1513260225.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:45.738Z,1513260225.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:46.093Z,1513260226.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:46.496Z,1513260226.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:46.533Z,1513260226.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:46.866Z,1513260226.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:46.937Z,1513260226.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:47.272Z,1513260227.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:47.667Z,1513260227.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:47.734Z,1513260227.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:48.111Z,1513260228.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:48.484Z,1513260228.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:48.529Z,1513260228.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:48.886Z,1513260228.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:48.933Z,1513260228.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:49.276Z,1513260229.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:49.676Z,1513260229.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:49.730Z,1513260229.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:50.071Z,1513260230.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:50.482Z,1513260230.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:50.526Z,1513260230.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:50.895Z,1513260230.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:50.929Z,1513260230.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:51.271Z,1513260231.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:51.680Z,1513260231.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:51.726Z,1513260231.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:52.083Z,1513260232.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:52.487Z,1513260232.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:52.522Z,1513260232.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:52.872Z,1513260232.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:52.925Z,1513260232.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:53.278Z,1513260233.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:53.680Z,1513260233.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:53.723Z,1513260233.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:54.067Z,1513260234.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:54.490Z,1513260234.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:54.518Z,1513260234.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:54.891Z,1513260234.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:54.921Z,1513260234.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:55.287Z,1513260235.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:55.682Z,1513260235.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:55.718Z,1513260235.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:56.061Z,1513260236.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:56.496Z,1513260236.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:56.515Z,1513260236.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:56.879Z,1513260236.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:56.953Z,1513260236.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:57.275Z,1513260237.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:57.716Z,1513260237.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:57.750Z,1513260237.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:58.112Z,1513260238.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:58.545Z,1513260238.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:58.568Z,1513260238.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:58.892Z,1513260238.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:58.950Z,1513260238.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:03:59.282Z,1513260239.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:59.675Z,1513260239.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:03:59.745Z,1513260239.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:00.076Z,1513260240.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:00.504Z,1513260240.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:00.542Z,1513260240.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:00.945Z,1513260240.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:00.948Z,1513260240.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:01.303Z,1513260241.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:01.688Z,1513260241.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:01.742Z,1513260241.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:02.103Z,1513260242.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:02.506Z,1513260242.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:02.506Z,1513260242.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 270
2017-12-14T14:04:02.506Z,1513260242.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:04:02.508Z,1513260242.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:02.508Z,1513260242.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 270
2017-12-14T14:04:02.508Z,1513260242.508 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:04:02.514Z,1513260242.514 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:02.514Z,1513260242.514 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 270
2017-12-14T14:04:02.514Z,1513260242.514 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:04:02.528Z,1513260242.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:04:02.529Z,1513260242.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:04:02.529Z,1513260242.529 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:04:02.537Z,1513260242.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:02.910Z,1513260242.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:04:02.910Z,1513260242.910 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 270
2017-12-14T14:04:02.911Z,1513260242.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:04:02.911Z,1513260242.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 270
2017-12-14T14:04:02.911Z,1513260242.911 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:04:02.911Z,1513260242.911 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 270
2017-12-14T14:04:02.941Z,1513260242.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:03.264Z,1513260243.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:04:03.264Z,1513260243.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:04:03.264Z,1513260243.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:04:03.265Z,1513260243.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:04:03.265Z,1513260243.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:04:03.266Z,1513260243.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:04:03.266Z,1513260243.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:04:03.266Z,1513260243.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:04:03.267Z,1513260243.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:04:03.720Z,1513260243.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:03.738Z,1513260243.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:04.116Z,1513260244.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:04.499Z,1513260244.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:04.533Z,1513260244.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:04.863Z,1513260244.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:04.937Z,1513260244.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:05.263Z,1513260245.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:05.665Z,1513260245.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:05.733Z,1513260245.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:06.063Z,1513260246.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:06.472Z,1513260246.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:06.529Z,1513260246.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:06.876Z,1513260246.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:06.933Z,1513260246.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:07.319Z,1513260247.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:07.679Z,1513260247.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:07.730Z,1513260247.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:08.065Z,1513260248.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:08.463Z,1513260248.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:08.526Z,1513260248.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:08.871Z,1513260248.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:09.266Z,1513260249.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:09.322Z,1513260249.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:09.677Z,1513260249.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:10.088Z,1513260250.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:10.117Z,1513260250.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:10.575Z,1513260250.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:10.898Z,1513260250.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:10.914Z,1513260250.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:11.271Z,1513260251.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:11.664Z,1513260251.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:11.711Z,1513260251.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:12.063Z,1513260252.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:12.508Z,1513260252.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:12.512Z,1513260252.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:12.896Z,1513260252.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:13.276Z,1513260253.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:13.301Z,1513260253.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:13.710Z,1513260253.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:14.062Z,1513260254.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:14.098Z,1513260254.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:14.463Z,1513260254.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:14.866Z,1513260254.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:14.894Z,1513260254.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:15.262Z,1513260255.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:15.676Z,1513260255.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:15.692Z,1513260255.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:16.083Z,1513260256.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:16.476Z,1513260256.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:16.486Z,1513260256.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:16.934Z,1513260256.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:17.281Z,1513260257.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:17.299Z,1513260257.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:17.665Z,1513260257.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:18.063Z,1513260258.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:18.078Z,1513260258.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:18.434Z,1513260258.434 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:04:18.434Z,1513260258.434 [NAL9602] Data Fault, FailCount= 4
2017-12-14T14:04:18.434Z,1513260258.434 [NAL9602](ERROR): Data Fault
2017-12-14T14:04:18.471Z,1513260258.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:18.485Z,1513260258.485 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:04:18.834Z,1513260258.834 [NAL9602](INFO): Powering down
2017-12-14T14:04:18.867Z,1513260258.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:18.874Z,1513260258.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:19.283Z,1513260259.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:19.667Z,1513260259.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:19.670Z,1513260259.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:19.683Z,1513260259.683 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:04:19.683Z,1513260259.683 [NAL9602] No Fault, FailCount= 4
2017-12-14T14:04:20.068Z,1513260260.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:20.466Z,1513260260.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:20.478Z,1513260260.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:20.863Z,1513260260.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:21.261Z,1513260261.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:21.268Z,1513260261.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:21.665Z,1513260261.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:22.058Z,1513260262.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:22.162Z,1513260262.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:22.477Z,1513260262.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:22.499Z,1513260262.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:22.864Z,1513260262.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:22.881Z,1513260262.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:23.286Z,1513260263.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:23.407Z,1513260263.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:23.679Z,1513260263.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:23.690Z,1513260263.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:24.078Z,1513260264.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:24.097Z,1513260264.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:24.504Z,1513260264.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:24.545Z,1513260264.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:24.914Z,1513260264.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:24.926Z,1513260264.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:25.271Z,1513260265.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:25.317Z,1513260265.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:25.679Z,1513260265.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:25.724Z,1513260265.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:26.110Z,1513260266.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:26.519Z,1513260266.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:26.577Z,1513260266.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:26.911Z,1513260266.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:26.941Z,1513260266.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:27.303Z,1513260267.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:27.671Z,1513260267.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:27.738Z,1513260267.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:28.084Z,1513260268.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:28.481Z,1513260268.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:28.534Z,1513260268.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:28.893Z,1513260268.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:28.937Z,1513260268.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:29.267Z,1513260269.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:29.667Z,1513260269.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:29.734Z,1513260269.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:30.069Z,1513260270.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:30.479Z,1513260270.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:30.529Z,1513260270.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:30.881Z,1513260270.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:30.933Z,1513260270.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:31.269Z,1513260271.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:31.675Z,1513260271.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:31.730Z,1513260271.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:32.074Z,1513260272.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:32.483Z,1513260272.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:32.525Z,1513260272.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:32.875Z,1513260272.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:32.929Z,1513260272.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:33.276Z,1513260273.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:33.678Z,1513260273.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:33.726Z,1513260273.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:34.079Z,1513260274.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:34.478Z,1513260274.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:34.521Z,1513260274.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:34.872Z,1513260274.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:34.925Z,1513260274.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:35.293Z,1513260275.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:35.674Z,1513260275.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:35.722Z,1513260275.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:36.112Z,1513260276.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:36.495Z,1513260276.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:36.517Z,1513260276.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:36.887Z,1513260276.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:36.922Z,1513260276.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:37.262Z,1513260277.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:37.665Z,1513260277.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:37.718Z,1513260277.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:38.069Z,1513260278.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:38.516Z,1513260278.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:38.543Z,1513260278.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:38.871Z,1513260278.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:38.942Z,1513260278.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:39.738Z,1513260279.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:40.534Z,1513260280.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:40.937Z,1513260280.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:41.734Z,1513260281.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:42.530Z,1513260282.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:42.667Z,1513260282.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:42.820Z,1513260282.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:42.933Z,1513260282.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:43.179Z,1513260283.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:43.574Z,1513260283.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:43.730Z,1513260283.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:43.978Z,1513260283.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:44.379Z,1513260284.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:44.525Z,1513260284.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:44.773Z,1513260284.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:44.929Z,1513260284.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:45.176Z,1513260285.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:45.575Z,1513260285.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:45.725Z,1513260285.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:45.991Z,1513260285.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:46.375Z,1513260286.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:46.525Z,1513260286.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:46.776Z,1513260286.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:46.929Z,1513260286.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:47.181Z,1513260287.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:47.611Z,1513260287.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:47.726Z,1513260287.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:47.974Z,1513260287.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:48.410Z,1513260288.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:48.521Z,1513260288.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:48.774Z,1513260288.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:48.926Z,1513260288.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:49.130Z,1513260289.130 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:04:49.212Z,1513260289.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:49.581Z,1513260289.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:49.723Z,1513260289.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:49.976Z,1513260289.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:50.383Z,1513260290.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:50.517Z,1513260290.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:50.773Z,1513260290.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:50.921Z,1513260290.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:51.177Z,1513260291.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:51.579Z,1513260291.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:51.718Z,1513260291.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:51.978Z,1513260291.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:52.378Z,1513260292.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:52.515Z,1513260292.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:52.787Z,1513260292.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:52.933Z,1513260292.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:53.161Z,1513260293.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:53.569Z,1513260293.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:53.730Z,1513260293.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:53.975Z,1513260293.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:54.367Z,1513260294.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:54.527Z,1513260294.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:54.774Z,1513260294.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:55.220Z,1513260295.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:55.322Z,1513260295.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:55.569Z,1513260295.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:55.725Z,1513260295.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:55.970Z,1513260295.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:56.378Z,1513260296.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:56.521Z,1513260296.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:56.767Z,1513260296.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:56.925Z,1513260296.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:57.169Z,1513260297.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:57.598Z,1513260297.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:57.723Z,1513260297.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:57.972Z,1513260297.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:58.415Z,1513260298.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:58.518Z,1513260298.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:58.781Z,1513260298.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:58.921Z,1513260298.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:59.197Z,1513260299.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:59.575Z,1513260299.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:04:59.718Z,1513260299.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:04:59.977Z,1513260299.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:00.330Z,1513260300.330 [NAL9602](INFO): NAL9602 initialized
2017-12-14T14:05:00.377Z,1513260300.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:00.513Z,1513260300.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:00.778Z,1513260300.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:00.919Z,1513260300.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:01.187Z,1513260301.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:01.619Z,1513260301.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:01.714Z,1513260301.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:01.985Z,1513260301.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:02.393Z,1513260302.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:02.509Z,1513260302.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:02.777Z,1513260302.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:02.914Z,1513260302.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:03.222Z,1513260303.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:03.584Z,1513260303.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:03.709Z,1513260303.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:04.023Z,1513260304.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:04.384Z,1513260304.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:04.507Z,1513260304.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:04.807Z,1513260304.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:04.918Z,1513260304.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:05.179Z,1513260305.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:05.577Z,1513260305.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:05.715Z,1513260305.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:05.984Z,1513260305.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:06.377Z,1513260306.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:06.511Z,1513260306.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:06.787Z,1513260306.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:06.921Z,1513260306.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:07.190Z,1513260307.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:07.591Z,1513260307.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:07.718Z,1513260307.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:08.004Z,1513260308.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:08.382Z,1513260308.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:08.526Z,1513260308.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:08.787Z,1513260308.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:08.933Z,1513260308.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:09.187Z,1513260309.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:09.608Z,1513260309.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:09.729Z,1513260309.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:09.988Z,1513260309.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:10.389Z,1513260310.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:10.528Z,1513260310.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:10.807Z,1513260310.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:10.933Z,1513260310.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:11.252Z,1513260311.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:11.611Z,1513260311.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:11.730Z,1513260311.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:11.971Z,1513260311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:12.371Z,1513260312.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:12.528Z,1513260312.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:12.799Z,1513260312.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:12.933Z,1513260312.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:13.198Z,1513260313.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:13.599Z,1513260313.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:13.730Z,1513260313.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:13.974Z,1513260313.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:14.376Z,1513260314.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:14.525Z,1513260314.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:14.773Z,1513260314.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:14.929Z,1513260314.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:15.181Z,1513260315.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:15.583Z,1513260315.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:15.725Z,1513260315.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:15.985Z,1513260315.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:16.381Z,1513260316.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:16.521Z,1513260316.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:16.775Z,1513260316.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:16.925Z,1513260316.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:17.172Z,1513260317.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:17.572Z,1513260317.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:17.722Z,1513260317.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:17.975Z,1513260317.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:18.384Z,1513260318.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:18.519Z,1513260318.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:18.782Z,1513260318.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:18.929Z,1513260318.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:19.195Z,1513260319.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:19.587Z,1513260319.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:19.726Z,1513260319.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:20.014Z,1513260320.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:20.372Z,1513260320.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:20.523Z,1513260320.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:20.782Z,1513260320.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:20.933Z,1513260320.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:21.173Z,1513260321.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:21.599Z,1513260321.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:21.730Z,1513260321.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:21.984Z,1513260321.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:22.381Z,1513260322.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:22.527Z,1513260322.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:22.789Z,1513260322.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:22.977Z,1513260322.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:23.177Z,1513260323.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:23.578Z,1513260323.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:23.773Z,1513260323.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:23.984Z,1513260323.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:24.382Z,1513260324.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:24.573Z,1513260324.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:05:24.789Z,1513260324.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:25.189Z,1513260325.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:25.626Z,1513260325.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:25.982Z,1513260325.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:26.382Z,1513260326.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:26.779Z,1513260326.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:27.182Z,1513260327.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:27.586Z,1513260327.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:28.003Z,1513260328.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:28.388Z,1513260328.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:28.807Z,1513260328.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:29.199Z,1513260329.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:29.570Z,1513260329.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:29.973Z,1513260329.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:30.372Z,1513260330.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:30.792Z,1513260330.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:31.177Z,1513260331.177 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T14:05:31.177Z,1513260331.177 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:05:31.177Z,1513260331.177 [BPC1](ERROR): Data Fault
2017-12-14T14:05:31.211Z,1513260331.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:31.236Z,1513260331.236 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:05:31.586Z,1513260331.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:32.011Z,1513260332.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:32.391Z,1513260332.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:32.420Z,1513260332.420 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:05:32.420Z,1513260332.420 [BPC1] No Fault, FailCount= 1
2017-12-14T14:05:32.839Z,1513260332.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:33.170Z,1513260333.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:33.591Z,1513260333.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:33.980Z,1513260333.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:34.374Z,1513260334.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:34.776Z,1513260334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:35.219Z,1513260335.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:35.571Z,1513260335.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:35.984Z,1513260335.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:36.379Z,1513260336.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:36.783Z,1513260336.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:37.185Z,1513260337.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:37.591Z,1513260337.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:37.973Z,1513260337.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:38.446Z,1513260338.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:38.777Z,1513260338.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:39.183Z,1513260339.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:42.779Z,1513260342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:42.931Z,1513260342.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:43.279Z,1513260343.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:43.675Z,1513260343.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:44.074Z,1513260344.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:44.451Z,1513260344.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:44.889Z,1513260344.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:45.248Z,1513260345.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:45.657Z,1513260345.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:46.080Z,1513260346.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:46.481Z,1513260346.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:46.851Z,1513260346.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:47.252Z,1513260347.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:47.651Z,1513260347.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:48.092Z,1513260348.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:48.455Z,1513260348.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:48.859Z,1513260348.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:49.267Z,1513260349.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:49.654Z,1513260349.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:50.063Z,1513260350.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:50.459Z,1513260350.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:50.867Z,1513260350.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:51.268Z,1513260351.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:51.671Z,1513260351.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:52.075Z,1513260352.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:52.481Z,1513260352.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:52.858Z,1513260352.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:53.249Z,1513260353.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:53.653Z,1513260353.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:54.047Z,1513260354.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:54.531Z,1513260354.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:54.947Z,1513260354.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:55.251Z,1513260355.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:55.652Z,1513260355.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:56.086Z,1513260356.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:56.455Z,1513260356.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:56.890Z,1513260356.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:57.250Z,1513260357.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:57.707Z,1513260357.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:58.060Z,1513260358.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:58.460Z,1513260358.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:58.853Z,1513260358.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:59.254Z,1513260359.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:05:59.654Z,1513260359.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:00.059Z,1513260360.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:00.479Z,1513260360.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:00.923Z,1513260360.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:01.275Z,1513260361.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:01.663Z,1513260361.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:02.063Z,1513260362.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:02.440Z,1513260362.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:02.858Z,1513260362.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:03.306Z,1513260363.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:03.671Z,1513260363.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:04.110Z,1513260364.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:04.510Z,1513260364.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:04.860Z,1513260364.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:05.291Z,1513260365.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:05.644Z,1513260365.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:06.047Z,1513260366.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:06.469Z,1513260366.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:06.870Z,1513260366.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:07.323Z,1513260367.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:07.648Z,1513260367.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:08.048Z,1513260368.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:08.451Z,1513260368.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:08.926Z,1513260368.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:09.279Z,1513260369.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:09.675Z,1513260369.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:10.076Z,1513260370.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:10.484Z,1513260370.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:10.860Z,1513260370.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:11.257Z,1513260371.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:11.656Z,1513260371.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:12.053Z,1513260372.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:12.467Z,1513260372.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:12.866Z,1513260372.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:13.264Z,1513260373.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:13.700Z,1513260373.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:14.071Z,1513260374.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:14.455Z,1513260374.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:14.857Z,1513260374.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:15.255Z,1513260375.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:15.665Z,1513260375.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:16.067Z,1513260376.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:16.464Z,1513260376.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:16.932Z,1513260376.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:17.303Z,1513260377.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:17.734Z,1513260377.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:18.059Z,1513260378.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:18.554Z,1513260378.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:18.979Z,1513260378.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:19.347Z,1513260379.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:19.729Z,1513260379.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:20.062Z,1513260380.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:20.503Z,1513260380.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:20.879Z,1513260380.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:21.276Z,1513260381.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:21.688Z,1513260381.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:22.093Z,1513260382.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:22.479Z,1513260382.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:22.899Z,1513260382.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:23.302Z,1513260383.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:23.674Z,1513260383.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:24.071Z,1513260384.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:24.462Z,1513260384.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:24.871Z,1513260384.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:25.275Z,1513260385.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:25.676Z,1513260385.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:26.088Z,1513260386.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:26.475Z,1513260386.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:26.869Z,1513260386.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:27.286Z,1513260387.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:27.696Z,1513260387.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:28.088Z,1513260388.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:28.468Z,1513260388.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:28.864Z,1513260388.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:29.314Z,1513260389.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:29.668Z,1513260389.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:30.183Z,1513260390.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:30.533Z,1513260390.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:30.883Z,1513260390.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:31.280Z,1513260391.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:31.318Z,1513260391.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:31.676Z,1513260391.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:31.722Z,1513260391.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:32.074Z,1513260392.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:32.520Z,1513260392.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:32.535Z,1513260392.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:32.860Z,1513260392.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:32.950Z,1513260392.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:33.275Z,1513260393.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:33.711Z,1513260393.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:33.746Z,1513260393.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:34.237Z,1513260394.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:34.486Z,1513260394.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:34.541Z,1513260394.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:34.894Z,1513260394.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:34.945Z,1513260394.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:35.290Z,1513260395.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:35.692Z,1513260395.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:35.742Z,1513260395.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:36.059Z,1513260396.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:36.458Z,1513260396.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:36.538Z,1513260396.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:36.891Z,1513260396.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:36.941Z,1513260396.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:06:37.287Z,1513260397.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:37.713Z,1513260397.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:38.063Z,1513260398.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:38.488Z,1513260398.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:38.868Z,1513260398.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:39.269Z,1513260399.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:46.032Z,1513260406.032 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:06:46.032Z,1513260406.032 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:06:46.032Z,1513260406.032 [BPC1](ERROR): Communications Fault
2017-12-14T14:06:46.103Z,1513260406.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:46.128Z,1513260406.128 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:06:46.274Z,1513260406.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:46.628Z,1513260406.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:47.077Z,1513260407.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:47.112Z,1513260407.112 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:06:47.112Z,1513260407.112 [BPC1] No Fault, FailCount= 1
2017-12-14T14:06:47.559Z,1513260407.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:47.844Z,1513260407.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:48.244Z,1513260408.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:48.646Z,1513260408.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:49.043Z,1513260409.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:49.450Z,1513260409.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:49.823Z,1513260409.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:50.301Z,1513260410.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:50.635Z,1513260410.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:51.039Z,1513260411.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:51.459Z,1513260411.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:51.836Z,1513260411.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:52.255Z,1513260412.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:52.628Z,1513260412.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:53.031Z,1513260413.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:53.411Z,1513260413.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:53.815Z,1513260413.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:54.255Z,1513260414.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:54.652Z,1513260414.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:55.020Z,1513260415.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:55.427Z,1513260415.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:55.850Z,1513260415.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:56.285Z,1513260416.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:56.628Z,1513260416.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:57.023Z,1513260417.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:57.430Z,1513260417.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:57.835Z,1513260417.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:58.232Z,1513260418.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:58.615Z,1513260418.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:59.015Z,1513260419.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:59.428Z,1513260419.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:06:59.832Z,1513260419.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:00.232Z,1513260420.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:00.645Z,1513260420.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:01.035Z,1513260421.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:01.429Z,1513260421.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:01.830Z,1513260421.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:02.244Z,1513260422.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:02.655Z,1513260422.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:03.023Z,1513260423.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:03.424Z,1513260423.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:03.424Z,1513260423.424 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 271
2017-12-14T14:07:03.424Z,1513260423.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:07:03.427Z,1513260423.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:03.427Z,1513260423.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 271
2017-12-14T14:07:03.427Z,1513260423.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:07:03.429Z,1513260423.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:03.430Z,1513260423.430 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 271
2017-12-14T14:07:03.430Z,1513260423.430 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:07:03.442Z,1513260423.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:07:03.442Z,1513260423.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:07:03.442Z,1513260423.442 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:07:03.924Z,1513260423.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:07:03.924Z,1513260423.924 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 271
2017-12-14T14:07:03.925Z,1513260423.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:07:03.925Z,1513260423.925 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 271
2017-12-14T14:07:03.925Z,1513260423.925 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:07:03.925Z,1513260423.925 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 271
2017-12-14T14:07:04.243Z,1513260424.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:07:04.243Z,1513260424.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:07:04.243Z,1513260424.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:07:04.244Z,1513260424.244 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:07:04.244Z,1513260424.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:07:04.244Z,1513260424.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:07:04.245Z,1513260424.245 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:07:04.245Z,1513260424.245 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:07:04.246Z,1513260424.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:07:04.629Z,1513260424.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:05.027Z,1513260425.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:05.428Z,1513260425.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:05.830Z,1513260425.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:06.253Z,1513260426.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:06.623Z,1513260426.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:07.055Z,1513260427.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:07.419Z,1513260427.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:07.825Z,1513260427.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:08.306Z,1513260428.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:08.620Z,1513260428.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:09.053Z,1513260429.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:09.424Z,1513260429.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:09.883Z,1513260429.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:10.329Z,1513260430.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:10.621Z,1513260430.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:11.027Z,1513260431.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:11.423Z,1513260431.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:11.823Z,1513260431.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:12.217Z,1513260432.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:12.624Z,1513260432.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:13.031Z,1513260433.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:13.438Z,1513260433.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:13.822Z,1513260433.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:14.223Z,1513260434.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:14.622Z,1513260434.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:15.023Z,1513260435.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:15.425Z,1513260435.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:15.830Z,1513260435.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:16.247Z,1513260436.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:16.661Z,1513260436.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:17.024Z,1513260437.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:17.424Z,1513260437.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:17.828Z,1513260437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:18.272Z,1513260438.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:18.639Z,1513260438.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:19.043Z,1513260439.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:19.436Z,1513260439.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:19.880Z,1513260439.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:20.244Z,1513260440.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:20.635Z,1513260440.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:21.039Z,1513260441.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:21.483Z,1513260441.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:21.837Z,1513260441.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:22.251Z,1513260442.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:22.611Z,1513260442.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:23.103Z,1513260443.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:23.434Z,1513260443.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:23.811Z,1513260443.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:24.317Z,1513260444.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:24.629Z,1513260444.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:25.031Z,1513260445.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:25.434Z,1513260445.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:25.819Z,1513260445.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:26.241Z,1513260446.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:26.622Z,1513260446.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:27.020Z,1513260447.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:27.432Z,1513260447.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:27.834Z,1513260447.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:28.282Z,1513260448.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:28.625Z,1513260448.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:29.026Z,1513260449.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:29.478Z,1513260449.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:29.834Z,1513260449.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:30.306Z,1513260450.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:30.647Z,1513260450.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:31.012Z,1513260451.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:31.446Z,1513260451.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:31.812Z,1513260451.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:32.263Z,1513260452.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:32.662Z,1513260452.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:33.027Z,1513260453.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:33.417Z,1513260453.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:33.815Z,1513260453.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:34.245Z,1513260454.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:34.617Z,1513260454.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:35.017Z,1513260455.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:35.421Z,1513260455.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:35.875Z,1513260455.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:36.251Z,1513260456.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:36.618Z,1513260456.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:37.023Z,1513260457.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:37.421Z,1513260457.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:37.820Z,1513260457.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:38.302Z,1513260458.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:38.632Z,1513260458.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:39.091Z,1513260459.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:39.459Z,1513260459.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:42.935Z,1513260462.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:43.053Z,1513260463.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:43.408Z,1513260463.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:43.819Z,1513260463.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:44.301Z,1513260464.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:44.638Z,1513260464.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:45.011Z,1513260465.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:45.405Z,1513260465.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:45.811Z,1513260465.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:46.272Z,1513260466.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:46.618Z,1513260466.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:47.019Z,1513260467.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:47.419Z,1513260467.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:47.804Z,1513260467.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:48.252Z,1513260468.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:48.612Z,1513260468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:49.011Z,1513260469.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:49.425Z,1513260469.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:49.831Z,1513260469.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:50.255Z,1513260470.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:50.615Z,1513260470.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:51.015Z,1513260471.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:51.421Z,1513260471.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:51.919Z,1513260471.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:52.283Z,1513260472.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:52.618Z,1513260472.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:53.016Z,1513260473.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:53.427Z,1513260473.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:53.828Z,1513260473.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:54.230Z,1513260474.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:54.683Z,1513260474.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:55.087Z,1513260475.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:55.435Z,1513260475.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:55.843Z,1513260475.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:56.251Z,1513260476.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:56.654Z,1513260476.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:57.003Z,1513260477.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:57.432Z,1513260477.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:57.830Z,1513260477.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:58.306Z,1513260478.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:58.610Z,1513260478.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:59.011Z,1513260479.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:59.406Z,1513260479.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:07:59.808Z,1513260479.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:00.292Z,1513260480.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:00.614Z,1513260480.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:01.020Z,1513260481.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:01.480Z,1513260481.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:01.807Z,1513260481.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:02.247Z,1513260482.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:02.603Z,1513260482.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:03.007Z,1513260483.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:03.420Z,1513260483.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:03.815Z,1513260483.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:04.250Z,1513260484.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:04.692Z,1513260484.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:05.020Z,1513260485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:05.423Z,1513260485.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:05.817Z,1513260485.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:06.295Z,1513260486.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:06.619Z,1513260486.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:07.001Z,1513260487.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:07.430Z,1513260487.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:07.836Z,1513260487.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:08.235Z,1513260488.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:08.611Z,1513260488.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:09.015Z,1513260489.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:09.420Z,1513260489.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:09.815Z,1513260489.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:10.219Z,1513260490.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:10.612Z,1513260490.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:11.052Z,1513260491.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:11.412Z,1513260491.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:11.845Z,1513260491.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:12.248Z,1513260492.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:12.615Z,1513260492.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:13.008Z,1513260493.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:13.415Z,1513260493.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:13.820Z,1513260493.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:14.278Z,1513260494.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:14.612Z,1513260494.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:15.019Z,1513260495.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:15.415Z,1513260495.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:15.811Z,1513260495.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:16.259Z,1513260496.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:16.667Z,1513260496.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:17.107Z,1513260497.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:17.463Z,1513260497.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:17.804Z,1513260497.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:18.236Z,1513260498.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:18.611Z,1513260498.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:19.007Z,1513260499.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:19.412Z,1513260499.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:19.810Z,1513260499.810 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:08:19.810Z,1513260499.810 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:08:19.810Z,1513260499.810 [BPC1](ERROR): Communications Fault
2017-12-14T14:08:19.818Z,1513260499.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:19.864Z,1513260499.864 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:08:20.279Z,1513260500.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:20.616Z,1513260500.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:21.019Z,1513260501.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:21.033Z,1513260501.033 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:08:21.033Z,1513260501.033 [BPC1] No Fault, FailCount= 1
2017-12-14T14:08:21.474Z,1513260501.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:21.805Z,1513260501.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:22.202Z,1513260502.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:22.627Z,1513260502.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:23.035Z,1513260503.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:23.426Z,1513260503.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:23.808Z,1513260503.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:24.286Z,1513260504.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:24.612Z,1513260504.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:25.006Z,1513260505.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:25.410Z,1513260505.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:25.815Z,1513260505.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:26.248Z,1513260506.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:26.615Z,1513260506.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:27.006Z,1513260507.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:27.498Z,1513260507.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:27.819Z,1513260507.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:28.255Z,1513260508.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:28.608Z,1513260508.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:29.011Z,1513260509.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:29.407Z,1513260509.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:29.854Z,1513260509.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:30.258Z,1513260510.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:30.671Z,1513260510.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:31.022Z,1513260511.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:31.420Z,1513260511.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:31.812Z,1513260511.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:32.256Z,1513260512.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:32.615Z,1513260512.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:33.019Z,1513260513.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:33.427Z,1513260513.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:33.854Z,1513260513.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:34.266Z,1513260514.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:34.626Z,1513260514.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:35.007Z,1513260515.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:35.438Z,1513260515.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:35.838Z,1513260515.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:36.234Z,1513260516.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:36.607Z,1513260516.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:37.046Z,1513260517.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:37.419Z,1513260517.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:37.831Z,1513260517.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:38.222Z,1513260518.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:38.614Z,1513260518.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:38.617Z,1513260518.617 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T14:08:38.617Z,1513260518.617 [Default:CheckIn:C.Wait] Stopped
2017-12-14T14:08:38.617Z,1513260518.617 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T14:08:38.617Z,1513260518.617 [Default:CheckIn:D] Running Loop=1
2017-12-14T14:08:39.007Z,1513260519.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:39.010Z,1513260519.010 [Default:CheckIn:D] Stopped
2017-12-14T14:08:39.010Z,1513260519.010 [Default:CheckIn:E] Running Loop=1
2017-12-14T14:08:39.416Z,1513260519.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:39.420Z,1513260519.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 815.393685 min 
2017-12-14T14:08:39.420Z,1513260519.420 [Default:CheckIn:E] Stopped
2017-12-14T14:08:39.420Z,1513260519.420 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T14:08:39.420Z,1513260519.420 [Default:CheckIn] Stopped
2017-12-14T14:08:39.420Z,1513260519.420 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T14:08:39.421Z,1513260519.421 [Default:CheckIn](INFO): Running loop #79
2017-12-14T14:08:39.421Z,1513260519.421 [Default:CheckIn] Running Loop=79
2017-12-14T14:08:39.422Z,1513260519.422 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T14:08:39.422Z,1513260519.422 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T14:08:39.820Z,1513260519.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:43.327Z,1513260523.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:43.472Z,1513260523.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:43.823Z,1513260523.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:44.286Z,1513260524.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:44.619Z,1513260524.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:45.062Z,1513260525.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:45.430Z,1513260525.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:45.828Z,1513260525.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:46.267Z,1513260526.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:46.659Z,1513260526.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:47.024Z,1513260527.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:47.404Z,1513260527.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:47.824Z,1513260527.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:48.272Z,1513260528.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:48.637Z,1513260528.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:49.040Z,1513260529.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:49.443Z,1513260529.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:49.889Z,1513260529.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:50.223Z,1513260530.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:50.703Z,1513260530.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:51.012Z,1513260531.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:51.417Z,1513260531.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:51.820Z,1513260531.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:52.227Z,1513260532.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:52.615Z,1513260532.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:53.107Z,1513260533.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:53.423Z,1513260533.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:53.821Z,1513260533.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:54.250Z,1513260534.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:54.615Z,1513260534.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:55.020Z,1513260535.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:55.420Z,1513260535.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:55.823Z,1513260535.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:56.312Z,1513260536.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:56.617Z,1513260536.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:57.025Z,1513260537.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:57.423Z,1513260537.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:57.816Z,1513260537.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:58.230Z,1513260538.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:58.642Z,1513260538.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:59.037Z,1513260539.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:59.498Z,1513260539.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:08:59.844Z,1513260539.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:00.254Z,1513260540.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:00.616Z,1513260540.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:01.020Z,1513260541.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:01.434Z,1513260541.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:01.828Z,1513260541.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:02.270Z,1513260542.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:02.648Z,1513260542.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:03.015Z,1513260543.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:03.455Z,1513260543.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:03.822Z,1513260543.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:04.223Z,1513260544.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:04.625Z,1513260544.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:05.079Z,1513260545.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:05.428Z,1513260545.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:05.919Z,1513260545.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:06.226Z,1513260546.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:06.667Z,1513260546.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:07.026Z,1513260547.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:07.429Z,1513260547.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:07.718Z,1513260547.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:07.839Z,1513260547.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:08.247Z,1513260548.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:08.513Z,1513260548.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:08.619Z,1513260548.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:08.919Z,1513260548.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:09.083Z,1513260549.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:09.434Z,1513260549.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:09.713Z,1513260549.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:09.832Z,1513260549.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:10.245Z,1513260550.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:10.513Z,1513260550.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:10.629Z,1513260550.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:10.921Z,1513260550.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:11.019Z,1513260551.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:11.434Z,1513260551.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:11.717Z,1513260551.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:11.837Z,1513260551.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:12.295Z,1513260552.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:12.514Z,1513260552.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:12.616Z,1513260552.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:12.917Z,1513260552.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:13.015Z,1513260553.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:13.454Z,1513260553.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:13.716Z,1513260553.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:13.814Z,1513260553.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:14.255Z,1513260554.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:14.509Z,1513260554.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:14.641Z,1513260554.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:14.913Z,1513260554.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:15.066Z,1513260555.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:15.470Z,1513260555.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:15.820Z,1513260555.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:16.304Z,1513260556.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:16.623Z,1513260556.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:17.017Z,1513260557.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:17.427Z,1513260557.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:17.833Z,1513260557.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:18.229Z,1513260558.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:18.653Z,1513260558.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:19.025Z,1513260559.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:19.426Z,1513260559.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:19.827Z,1513260559.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:19.841Z,1513260559.841 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:09:20.230Z,1513260560.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:20.619Z,1513260560.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:21.019Z,1513260561.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:21.426Z,1513260561.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:21.710Z,1513260561.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:21.832Z,1513260561.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:22.247Z,1513260562.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:22.505Z,1513260562.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:22.622Z,1513260562.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:22.910Z,1513260562.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:23.024Z,1513260563.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:23.431Z,1513260563.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:23.711Z,1513260563.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:23.835Z,1513260563.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:24.246Z,1513260564.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:24.509Z,1513260564.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:24.626Z,1513260564.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:24.914Z,1513260564.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:25.043Z,1513260565.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:25.459Z,1513260565.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:25.710Z,1513260565.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:25.830Z,1513260565.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:26.246Z,1513260566.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:26.505Z,1513260566.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:26.636Z,1513260566.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:26.912Z,1513260566.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:27.067Z,1513260567.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:27.437Z,1513260567.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:27.706Z,1513260567.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:27.815Z,1513260567.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:28.318Z,1513260568.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:28.503Z,1513260568.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:28.614Z,1513260568.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:28.913Z,1513260568.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:29.059Z,1513260569.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:29.438Z,1513260569.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:29.710Z,1513260569.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:29.837Z,1513260569.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:30.287Z,1513260570.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:30.505Z,1513260570.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:30.616Z,1513260570.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:30.910Z,1513260570.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:31.022Z,1513260571.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:31.436Z,1513260571.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:31.708Z,1513260571.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:31.832Z,1513260571.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:32.235Z,1513260572.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:32.503Z,1513260572.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:32.628Z,1513260572.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:32.915Z,1513260572.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:33.039Z,1513260573.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:33.429Z,1513260573.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:33.712Z,1513260573.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:33.806Z,1513260573.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:34.212Z,1513260574.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:34.507Z,1513260574.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:34.649Z,1513260574.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:34.913Z,1513260574.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:35.015Z,1513260575.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:35.434Z,1513260575.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:35.709Z,1513260575.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:35.843Z,1513260575.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:36.272Z,1513260576.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:36.507Z,1513260576.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:36.622Z,1513260576.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:36.913Z,1513260576.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:37.019Z,1513260577.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:37.451Z,1513260577.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:37.710Z,1513260577.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:37.859Z,1513260577.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:38.257Z,1513260578.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:38.505Z,1513260578.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:38.631Z,1513260578.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:38.910Z,1513260578.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:39.028Z,1513260579.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:39.429Z,1513260579.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:39.707Z,1513260579.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:39.820Z,1513260579.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:40.501Z,1513260580.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:40.905Z,1513260580.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:41.702Z,1513260581.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:42.497Z,1513260582.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:43.295Z,1513260583.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:43.333Z,1513260583.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:43.470Z,1513260583.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:43.705Z,1513260583.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:43.827Z,1513260583.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:44.334Z,1513260584.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:44.512Z,1513260584.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:44.640Z,1513260584.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:44.917Z,1513260584.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:45.026Z,1513260585.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:45.423Z,1513260585.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:45.715Z,1513260585.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:45.826Z,1513260585.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:46.224Z,1513260586.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:46.511Z,1513260586.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:46.630Z,1513260586.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:46.917Z,1513260586.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:47.047Z,1513260587.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:47.434Z,1513260587.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:47.714Z,1513260587.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:47.827Z,1513260587.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:48.267Z,1513260588.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:48.511Z,1513260588.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:48.619Z,1513260588.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:48.922Z,1513260588.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:49.020Z,1513260589.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:49.463Z,1513260589.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:49.718Z,1513260589.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:49.828Z,1513260589.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:50.258Z,1513260590.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:50.515Z,1513260590.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:50.675Z,1513260590.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:50.925Z,1513260590.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:51.027Z,1513260591.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:51.451Z,1513260591.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:51.721Z,1513260591.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:51.824Z,1513260591.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:52.257Z,1513260592.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:52.517Z,1513260592.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:52.659Z,1513260592.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:52.921Z,1513260592.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:53.078Z,1513260593.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:53.432Z,1513260593.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:53.719Z,1513260593.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:53.878Z,1513260593.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:54.244Z,1513260594.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:54.513Z,1513260594.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:54.630Z,1513260594.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:54.917Z,1513260594.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:55.024Z,1513260595.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:55.440Z,1513260595.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:55.714Z,1513260595.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:55.832Z,1513260595.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:56.244Z,1513260596.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:56.509Z,1513260596.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:56.624Z,1513260596.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:56.915Z,1513260596.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:57.071Z,1513260597.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:57.422Z,1513260597.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:57.710Z,1513260597.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:57.822Z,1513260597.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:58.283Z,1513260598.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:58.505Z,1513260598.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:58.624Z,1513260598.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:58.911Z,1513260598.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:59.024Z,1513260599.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:59.439Z,1513260599.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:09:59.705Z,1513260599.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:09:59.856Z,1513260599.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:00.270Z,1513260600.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:00.504Z,1513260600.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:00.631Z,1513260600.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:00.913Z,1513260600.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:01.029Z,1513260601.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:01.433Z,1513260601.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:01.710Z,1513260601.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:01.843Z,1513260601.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:02.233Z,1513260602.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:02.507Z,1513260602.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:02.619Z,1513260602.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:02.918Z,1513260602.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:03.019Z,1513260603.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:03.512Z,1513260603.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:03.714Z,1513260603.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:03.835Z,1513260603.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:04.259Z,1513260604.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:04.259Z,1513260604.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 272
2017-12-14T14:10:04.259Z,1513260604.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:10:04.267Z,1513260604.267 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:04.267Z,1513260604.267 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 272
2017-12-14T14:10:04.267Z,1513260604.267 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:10:04.277Z,1513260604.277 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:04.278Z,1513260604.278 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 272
2017-12-14T14:10:04.278Z,1513260604.278 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:10:04.310Z,1513260604.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:10:04.310Z,1513260604.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:10:04.311Z,1513260604.311 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:10:04.509Z,1513260604.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:04.645Z,1513260604.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:10:04.645Z,1513260604.645 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 272
2017-12-14T14:10:04.645Z,1513260604.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:10:04.645Z,1513260604.645 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 272
2017-12-14T14:10:04.646Z,1513260604.646 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:10:04.646Z,1513260604.646 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 272
2017-12-14T14:10:04.919Z,1513260604.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:05.028Z,1513260605.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:10:05.029Z,1513260605.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:10:05.029Z,1513260605.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:10:05.030Z,1513260605.030 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:10:05.030Z,1513260605.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:10:05.030Z,1513260605.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:10:05.031Z,1513260605.031 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:10:05.031Z,1513260605.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:10:05.031Z,1513260605.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:10:05.439Z,1513260605.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:05.713Z,1513260605.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:05.843Z,1513260605.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:06.251Z,1513260606.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:06.512Z,1513260606.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:06.679Z,1513260606.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:06.921Z,1513260606.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:07.034Z,1513260607.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:07.434Z,1513260607.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:07.718Z,1513260607.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:07.818Z,1513260607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:08.250Z,1513260608.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:08.513Z,1513260608.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:08.643Z,1513260608.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:08.918Z,1513260608.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:09.048Z,1513260609.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:09.443Z,1513260609.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:09.715Z,1513260609.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:09.866Z,1513260609.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:10.279Z,1513260610.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:10.509Z,1513260610.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:10.626Z,1513260610.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:10.913Z,1513260610.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:11.018Z,1513260611.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:11.448Z,1513260611.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:11.711Z,1513260611.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:11.831Z,1513260611.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:12.323Z,1513260612.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:12.505Z,1513260612.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:12.623Z,1513260612.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:12.910Z,1513260612.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:13.115Z,1513260613.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:13.424Z,1513260613.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:13.706Z,1513260613.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:13.851Z,1513260613.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:14.223Z,1513260614.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:14.511Z,1513260614.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:14.670Z,1513260614.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:14.933Z,1513260614.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:15.032Z,1513260615.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:15.435Z,1513260615.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:15.729Z,1513260615.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:15.821Z,1513260615.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:16.235Z,1513260616.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:16.526Z,1513260616.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:16.644Z,1513260616.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:16.933Z,1513260616.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:17.037Z,1513260617.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:17.441Z,1513260617.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:17.730Z,1513260617.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:17.842Z,1513260617.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:18.258Z,1513260618.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:18.528Z,1513260618.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:18.624Z,1513260618.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:18.933Z,1513260618.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:19.022Z,1513260619.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:19.474Z,1513260619.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:19.731Z,1513260619.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:19.824Z,1513260619.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:20.254Z,1513260620.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:20.525Z,1513260620.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:20.616Z,1513260620.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:20.929Z,1513260620.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:21.024Z,1513260621.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:21.422Z,1513260621.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:21.726Z,1513260621.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:21.823Z,1513260621.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:22.253Z,1513260622.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:22.522Z,1513260622.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:22.625Z,1513260622.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:22.925Z,1513260622.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:23.067Z,1513260623.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:23.439Z,1513260623.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:23.722Z,1513260623.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:23.823Z,1513260623.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:24.262Z,1513260624.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:24.518Z,1513260624.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:24.631Z,1513260624.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:24.921Z,1513260624.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:25.024Z,1513260625.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:25.433Z,1513260625.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:25.721Z,1513260625.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:25.867Z,1513260625.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:26.292Z,1513260626.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:26.519Z,1513260626.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:26.631Z,1513260626.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:26.925Z,1513260626.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:27.019Z,1513260627.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:27.470Z,1513260627.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:27.722Z,1513260627.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:27.819Z,1513260627.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:28.218Z,1513260628.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:28.519Z,1513260628.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:28.642Z,1513260628.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:28.937Z,1513260628.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:29.078Z,1513260629.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:29.435Z,1513260629.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:29.734Z,1513260629.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:29.824Z,1513260629.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:30.224Z,1513260630.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:30.532Z,1513260630.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:30.631Z,1513260630.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:30.937Z,1513260630.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:31.020Z,1513260631.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:31.432Z,1513260631.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:31.734Z,1513260631.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:31.831Z,1513260631.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:32.291Z,1513260632.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:32.530Z,1513260632.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:32.630Z,1513260632.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:32.933Z,1513260632.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:33.021Z,1513260633.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:33.427Z,1513260633.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:33.730Z,1513260633.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:33.825Z,1513260633.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:34.276Z,1513260634.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:34.525Z,1513260634.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:34.631Z,1513260634.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:34.929Z,1513260634.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:35.036Z,1513260635.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:35.533Z,1513260635.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:35.726Z,1513260635.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:35.827Z,1513260635.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:36.247Z,1513260636.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:36.521Z,1513260636.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:36.661Z,1513260636.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:36.925Z,1513260636.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:37.021Z,1513260637.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:37.474Z,1513260637.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:37.722Z,1513260637.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:37.835Z,1513260637.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:38.248Z,1513260638.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:38.519Z,1513260638.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:38.631Z,1513260638.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:38.925Z,1513260638.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:39.020Z,1513260639.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:39.427Z,1513260639.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:39.722Z,1513260639.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:39.823Z,1513260639.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:40.517Z,1513260640.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:40.921Z,1513260640.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:41.720Z,1513260641.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:42.515Z,1513260642.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:42.925Z,1513260642.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:43.394Z,1513260643.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:43.535Z,1513260643.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:43.722Z,1513260643.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:43.927Z,1513260643.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:44.298Z,1513260644.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:44.518Z,1513260644.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:44.690Z,1513260644.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:44.925Z,1513260644.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:45.096Z,1513260645.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:45.532Z,1513260645.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:45.721Z,1513260645.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:45.894Z,1513260645.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:46.303Z,1513260646.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:46.522Z,1513260646.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:46.702Z,1513260646.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:46.925Z,1513260646.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:47.112Z,1513260647.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:47.511Z,1513260647.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:47.724Z,1513260647.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:47.898Z,1513260647.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:48.298Z,1513260648.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:48.517Z,1513260648.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:48.699Z,1513260648.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:48.921Z,1513260648.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:49.108Z,1513260649.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:49.504Z,1513260649.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:49.719Z,1513260649.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:49.904Z,1513260649.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:50.310Z,1513260650.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:50.514Z,1513260650.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:50.703Z,1513260650.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:50.917Z,1513260650.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:51.124Z,1513260651.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:51.558Z,1513260651.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:51.714Z,1513260651.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:51.896Z,1513260651.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:52.301Z,1513260652.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:52.509Z,1513260652.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:52.716Z,1513260652.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:52.915Z,1513260652.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:53.110Z,1513260653.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:53.519Z,1513260653.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:53.710Z,1513260653.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:53.898Z,1513260653.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:54.307Z,1513260654.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:54.506Z,1513260654.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:54.740Z,1513260654.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:54.910Z,1513260654.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:55.088Z,1513260655.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:55.508Z,1513260655.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:55.706Z,1513260655.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:55.912Z,1513260655.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:56.310Z,1513260656.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:56.504Z,1513260656.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:56.689Z,1513260656.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:56.913Z,1513260656.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:57.088Z,1513260657.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:57.523Z,1513260657.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:57.709Z,1513260657.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:57.944Z,1513260657.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:58.291Z,1513260658.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:58.507Z,1513260658.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:58.743Z,1513260658.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:58.917Z,1513260658.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:59.112Z,1513260659.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:59.527Z,1513260659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:10:59.714Z,1513260659.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:10:59.892Z,1513260659.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:00.288Z,1513260660.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:00.509Z,1513260660.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:00.694Z,1513260660.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:00.914Z,1513260660.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:01.128Z,1513260661.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:01.492Z,1513260661.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:01.710Z,1513260661.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:01.896Z,1513260661.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:02.292Z,1513260662.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:02.509Z,1513260662.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:02.692Z,1513260662.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:02.913Z,1513260662.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:03.105Z,1513260663.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:03.491Z,1513260663.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:03.709Z,1513260663.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:03.897Z,1513260663.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:04.343Z,1513260664.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:04.507Z,1513260664.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:04.708Z,1513260664.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:04.915Z,1513260664.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:05.111Z,1513260665.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:05.500Z,1513260665.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:05.710Z,1513260665.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:05.893Z,1513260665.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:06.303Z,1513260666.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:06.505Z,1513260666.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:06.696Z,1513260666.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:06.910Z,1513260666.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:07.097Z,1513260667.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:07.599Z,1513260667.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:07.708Z,1513260667.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:07.915Z,1513260667.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:08.309Z,1513260668.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:08.506Z,1513260668.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:08.706Z,1513260668.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:08.910Z,1513260668.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:09.103Z,1513260669.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:09.485Z,1513260669.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:09.706Z,1513260669.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:09.884Z,1513260669.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:10.299Z,1513260670.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:10.503Z,1513260670.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:10.749Z,1513260670.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:10.911Z,1513260670.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:11.106Z,1513260671.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:11.501Z,1513260671.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:11.706Z,1513260671.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:11.898Z,1513260671.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:12.303Z,1513260672.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:12.509Z,1513260672.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:12.693Z,1513260672.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:12.917Z,1513260672.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:13.100Z,1513260673.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:13.504Z,1513260673.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:13.716Z,1513260673.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:13.944Z,1513260673.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:14.300Z,1513260674.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:14.513Z,1513260674.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:14.700Z,1513260674.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:14.917Z,1513260674.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:15.103Z,1513260675.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:15.500Z,1513260675.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:15.714Z,1513260675.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:15.897Z,1513260675.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:16.303Z,1513260676.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:16.509Z,1513260676.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:16.719Z,1513260676.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:16.914Z,1513260676.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:17.199Z,1513260677.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:17.548Z,1513260677.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:17.710Z,1513260677.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:17.899Z,1513260677.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:18.299Z,1513260678.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:18.506Z,1513260678.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:18.695Z,1513260678.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:18.911Z,1513260678.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:19.115Z,1513260679.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:19.591Z,1513260679.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:19.706Z,1513260679.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:19.942Z,1513260679.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:20.319Z,1513260680.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:20.503Z,1513260680.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:20.780Z,1513260680.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:20.914Z,1513260680.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:21.089Z,1513260681.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:21.532Z,1513260681.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:21.715Z,1513260681.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:21.901Z,1513260681.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:22.342Z,1513260682.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:22.522Z,1513260682.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:22.711Z,1513260682.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:22.926Z,1513260682.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:23.132Z,1513260683.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:23.536Z,1513260683.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:23.726Z,1513260683.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:23.933Z,1513260683.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:24.296Z,1513260684.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:24.522Z,1513260684.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:24.699Z,1513260684.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:24.926Z,1513260684.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:25.127Z,1513260685.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:25.560Z,1513260685.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:25.722Z,1513260685.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:25.912Z,1513260685.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:26.334Z,1513260686.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:26.522Z,1513260686.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:26.713Z,1513260686.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:27.115Z,1513260687.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:27.318Z,1513260687.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:27.489Z,1513260687.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:27.721Z,1513260687.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:27.903Z,1513260687.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:28.291Z,1513260688.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:28.517Z,1513260688.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:28.703Z,1513260688.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:28.922Z,1513260688.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:29.109Z,1513260689.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:29.525Z,1513260689.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:29.722Z,1513260689.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:29.984Z,1513260689.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:30.318Z,1513260690.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:30.518Z,1513260690.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:30.711Z,1513260690.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:30.921Z,1513260690.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:31.114Z,1513260691.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:31.562Z,1513260691.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:31.718Z,1513260691.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:31.915Z,1513260691.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:32.308Z,1513260692.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:32.514Z,1513260692.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:32.715Z,1513260692.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:32.922Z,1513260692.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:33.123Z,1513260693.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:33.540Z,1513260693.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:33.718Z,1513260693.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:33.923Z,1513260693.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:34.346Z,1513260694.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:34.515Z,1513260694.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:34.775Z,1513260694.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:34.925Z,1513260694.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:35.123Z,1513260695.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:35.528Z,1513260695.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:35.723Z,1513260695.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:35.922Z,1513260695.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:36.306Z,1513260696.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:36.518Z,1513260696.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:36.703Z,1513260696.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:36.922Z,1513260696.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:37.143Z,1513260697.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:37.508Z,1513260697.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:37.721Z,1513260697.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:37.927Z,1513260697.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:38.314Z,1513260698.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:38.519Z,1513260698.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:38.700Z,1513260698.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:38.926Z,1513260698.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:39.110Z,1513260699.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:39.519Z,1513260699.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:39.724Z,1513260699.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:39.939Z,1513260699.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:40.519Z,1513260700.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:40.965Z,1513260700.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:41.762Z,1513260701.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:42.558Z,1513260702.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:42.961Z,1513260702.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:43.758Z,1513260703.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:44.554Z,1513260704.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:44.957Z,1513260704.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:45.754Z,1513260705.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:46.550Z,1513260706.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:46.953Z,1513260706.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:47.073Z,1513260707.073 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:11:47.073Z,1513260707.073 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:11:47.073Z,1513260707.073 [BPC1](ERROR): Communications Fault
2017-12-14T14:11:47.099Z,1513260707.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:47.162Z,1513260707.162 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:11:47.304Z,1513260707.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:47.643Z,1513260707.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:47.751Z,1513260707.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:48.036Z,1513260708.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:48.081Z,1513260708.081 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:11:48.081Z,1513260708.081 [BPC1] No Fault, FailCount= 1
2017-12-14T14:11:48.503Z,1513260708.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:48.545Z,1513260708.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:48.852Z,1513260708.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:49.258Z,1513260709.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:49.342Z,1513260709.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:49.650Z,1513260709.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:50.063Z,1513260710.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:50.145Z,1513260710.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:50.457Z,1513260710.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:50.823Z,1513260710.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:50.943Z,1513260710.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:51.222Z,1513260711.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:51.620Z,1513260711.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:51.737Z,1513260711.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:52.023Z,1513260712.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:52.454Z,1513260712.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:52.533Z,1513260712.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:52.831Z,1513260712.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:53.227Z,1513260713.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:53.329Z,1513260713.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:53.627Z,1513260713.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:54.035Z,1513260714.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:54.125Z,1513260714.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:54.422Z,1513260714.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:54.827Z,1513260714.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:54.921Z,1513260714.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:55.239Z,1513260715.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:55.537Z,1513260715.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:55.636Z,1513260715.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:55.942Z,1513260715.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:56.026Z,1513260716.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:56.345Z,1513260716.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:56.428Z,1513260716.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:56.750Z,1513260716.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:56.899Z,1513260716.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:57.153Z,1513260717.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:57.253Z,1513260717.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:57.620Z,1513260717.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:57.950Z,1513260717.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:58.026Z,1513260718.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:58.459Z,1513260718.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:58.561Z,1513260718.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:58.834Z,1513260718.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:59.233Z,1513260719.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:11:59.358Z,1513260719.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:11:59.627Z,1513260719.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:00.091Z,1513260720.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:00.157Z,1513260720.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:00.442Z,1513260720.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:00.589Z,1513260720.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:00.848Z,1513260720.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:01.252Z,1513260721.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:01.385Z,1513260721.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:01.648Z,1513260721.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:02.024Z,1513260722.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:02.182Z,1513260722.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:02.428Z,1513260722.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:02.585Z,1513260722.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:02.914Z,1513260722.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:03.242Z,1513260723.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:03.627Z,1513260723.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:04.022Z,1513260724.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:04.428Z,1513260724.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:04.829Z,1513260724.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:05.228Z,1513260725.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:05.410Z,1513260725.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:05.625Z,1513260725.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:06.019Z,1513260726.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:06.205Z,1513260726.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:12:06.446Z,1513260726.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:06.826Z,1513260726.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:07.240Z,1513260727.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:07.636Z,1513260727.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:08.035Z,1513260728.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:08.426Z,1513260728.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:08.824Z,1513260728.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:09.266Z,1513260729.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:09.620Z,1513260729.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:10.025Z,1513260730.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:10.430Z,1513260730.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:10.834Z,1513260730.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:11.239Z,1513260731.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:11.624Z,1513260731.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:12.002Z,1513260732.002 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:12:12.002Z,1513260732.002 [BPC1] Communications Fault, FailCount= 2
2017-12-14T14:12:12.002Z,1513260732.002 [BPC1](ERROR): Communications Fault
2017-12-14T14:12:12.040Z,1513260732.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:12.069Z,1513260732.069 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:12:12.425Z,1513260732.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:12.851Z,1513260732.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:13.249Z,1513260733.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:13.290Z,1513260733.290 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:12:13.290Z,1513260733.290 [BPC1] No Fault, FailCount= 2
2017-12-14T14:12:13.696Z,1513260733.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:14.039Z,1513260734.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:14.430Z,1513260734.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:14.831Z,1513260734.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:15.231Z,1513260735.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:15.625Z,1513260735.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:16.051Z,1513260736.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:16.449Z,1513260736.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:16.839Z,1513260736.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:17.239Z,1513260737.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:17.635Z,1513260737.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:18.015Z,1513260738.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:18.418Z,1513260738.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:18.817Z,1513260738.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:19.324Z,1513260739.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:19.624Z,1513260739.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:20.043Z,1513260740.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:20.433Z,1513260740.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:20.816Z,1513260740.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:21.223Z,1513260741.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:21.623Z,1513260741.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:22.055Z,1513260742.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:22.424Z,1513260742.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:22.839Z,1513260742.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:23.239Z,1513260743.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:23.625Z,1513260743.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:24.033Z,1513260744.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:24.427Z,1513260744.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:24.832Z,1513260744.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:25.235Z,1513260745.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:25.638Z,1513260745.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:26.020Z,1513260746.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:26.418Z,1513260746.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:26.816Z,1513260746.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:27.220Z,1513260747.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:27.619Z,1513260747.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:28.020Z,1513260748.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:28.427Z,1513260748.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:28.899Z,1513260748.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:29.221Z,1513260749.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:29.620Z,1513260749.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:30.019Z,1513260750.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:30.434Z,1513260750.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:30.826Z,1513260750.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:31.231Z,1513260751.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:31.629Z,1513260751.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:32.061Z,1513260752.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:32.429Z,1513260752.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:32.863Z,1513260752.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:33.235Z,1513260753.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:33.622Z,1513260753.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:34.063Z,1513260754.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:34.455Z,1513260754.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:34.857Z,1513260754.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:35.227Z,1513260755.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:35.628Z,1513260755.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:36.038Z,1513260756.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:36.428Z,1513260756.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:36.825Z,1513260756.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:37.241Z,1513260757.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:37.640Z,1513260757.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:38.043Z,1513260758.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:38.449Z,1513260758.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:38.844Z,1513260758.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:39.215Z,1513260759.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:39.619Z,1513260759.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:40.023Z,1513260760.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:43.606Z,1513260763.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:43.749Z,1513260763.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:44.107Z,1513260764.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:44.481Z,1513260764.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:44.914Z,1513260764.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:45.283Z,1513260765.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:45.678Z,1513260765.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:46.078Z,1513260766.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:46.487Z,1513260766.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:46.888Z,1513260766.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:47.288Z,1513260767.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:47.684Z,1513260767.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:48.123Z,1513260768.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:48.551Z,1513260768.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:48.909Z,1513260768.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:49.291Z,1513260769.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:49.688Z,1513260769.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:50.084Z,1513260770.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:50.573Z,1513260770.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:50.911Z,1513260770.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:51.294Z,1513260771.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:51.692Z,1513260771.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:52.086Z,1513260772.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:52.508Z,1513260772.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:52.898Z,1513260772.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:53.295Z,1513260773.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:53.685Z,1513260773.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:54.088Z,1513260774.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:54.547Z,1513260774.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:54.889Z,1513260774.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:55.302Z,1513260775.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:55.754Z,1513260775.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:56.114Z,1513260776.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:56.498Z,1513260776.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:56.920Z,1513260776.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:57.278Z,1513260777.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:57.752Z,1513260777.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:58.080Z,1513260778.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:58.511Z,1513260778.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:58.897Z,1513260778.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:59.276Z,1513260779.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:12:59.683Z,1513260779.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:00.079Z,1513260780.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:00.495Z,1513260780.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:00.899Z,1513260780.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:01.292Z,1513260781.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:01.706Z,1513260781.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:02.072Z,1513260782.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:02.551Z,1513260782.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:02.891Z,1513260782.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:03.283Z,1513260783.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:03.700Z,1513260783.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:04.130Z,1513260784.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:04.575Z,1513260784.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:04.912Z,1513260784.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:05.293Z,1513260785.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:05.293Z,1513260785.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 273
2017-12-14T14:13:05.293Z,1513260785.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:13:05.295Z,1513260785.295 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:05.295Z,1513260785.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 273
2017-12-14T14:13:05.295Z,1513260785.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:13:05.297Z,1513260785.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:05.298Z,1513260785.298 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 273
2017-12-14T14:13:05.298Z,1513260785.298 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:13:05.342Z,1513260785.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:13:05.342Z,1513260785.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:13:05.342Z,1513260785.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:13:05.689Z,1513260785.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:13:05.690Z,1513260785.690 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 273
2017-12-14T14:13:05.690Z,1513260785.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:13:05.690Z,1513260785.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 273
2017-12-14T14:13:05.691Z,1513260785.691 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:13:05.691Z,1513260785.691 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 273
2017-12-14T14:13:06.168Z,1513260786.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:13:06.170Z,1513260786.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:13:06.171Z,1513260786.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:13:06.173Z,1513260786.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:13:06.174Z,1513260786.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:13:06.175Z,1513260786.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:13:06.189Z,1513260786.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:13:06.189Z,1513260786.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:13:06.190Z,1513260786.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:13:06.484Z,1513260786.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:06.896Z,1513260786.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:07.295Z,1513260787.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:07.678Z,1513260787.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:08.083Z,1513260788.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:08.502Z,1513260788.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:08.894Z,1513260788.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:09.314Z,1513260789.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:09.704Z,1513260789.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:10.100Z,1513260790.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:10.524Z,1513260790.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:10.883Z,1513260790.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:11.284Z,1513260791.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:11.684Z,1513260791.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:12.084Z,1513260792.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:12.497Z,1513260792.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:12.905Z,1513260792.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:13.405Z,1513260793.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:13.738Z,1513260793.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:14.088Z,1513260794.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:14.612Z,1513260794.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:14.895Z,1513260794.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:15.298Z,1513260795.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:15.700Z,1513260795.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:16.104Z,1513260796.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:16.595Z,1513260796.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:16.946Z,1513260796.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:17.297Z,1513260797.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:17.677Z,1513260797.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:18.096Z,1513260798.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:18.591Z,1513260798.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:18.920Z,1513260798.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:19.324Z,1513260799.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:19.699Z,1513260799.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:20.211Z,1513260800.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:20.491Z,1513260800.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:20.886Z,1513260800.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:21.300Z,1513260801.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:21.697Z,1513260801.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:22.099Z,1513260802.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:22.479Z,1513260802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:22.874Z,1513260802.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:23.280Z,1513260803.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:23.683Z,1513260803.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:24.073Z,1513260804.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:24.507Z,1513260804.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:24.954Z,1513260804.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:25.310Z,1513260805.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:25.687Z,1513260805.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:26.091Z,1513260806.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:26.551Z,1513260806.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:26.879Z,1513260806.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:27.307Z,1513260807.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:27.709Z,1513260807.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:28.107Z,1513260808.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:28.512Z,1513260808.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:28.875Z,1513260808.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:29.279Z,1513260809.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:29.732Z,1513260809.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:30.083Z,1513260810.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:30.571Z,1513260810.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:30.927Z,1513260810.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:31.320Z,1513260811.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:31.687Z,1513260811.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:32.076Z,1513260812.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:32.573Z,1513260812.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:32.933Z,1513260812.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:33.295Z,1513260813.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:33.702Z,1513260813.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:34.099Z,1513260814.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:34.488Z,1513260814.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:34.889Z,1513260814.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:35.290Z,1513260815.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:35.696Z,1513260815.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:36.107Z,1513260816.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:36.505Z,1513260816.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:36.911Z,1513260816.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:37.307Z,1513260817.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:37.698Z,1513260817.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:38.077Z,1513260818.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:38.489Z,1513260818.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:38.879Z,1513260818.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:39.287Z,1513260819.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:39.742Z,1513260819.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:39.746Z,1513260819.746 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T14:08:39.4Z
2017-12-14T14:13:39.746Z,1513260819.746 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:13:39.746Z,1513260819.746 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:13:40.188Z,1513260820.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:43.437Z,1513260823.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:13:44.047Z,1513260824.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:44.132Z,1513260824.132 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0316.lzma
2017-12-14T14:13:44.178Z,1513260824.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:44.233Z,1513260824.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:13:44.593Z,1513260824.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:44.911Z,1513260824.911 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0316.lzma.bak
2017-12-14T14:13:44.912Z,1513260824.912 [DataOverHttps](INFO): SBD MOMSN=5438941
2017-12-14T14:13:45.013Z,1513260825.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:46.387Z,1513260826.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:46.618Z,1513260826.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:49.886Z,1513260829.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:50.006Z,1513260830.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:50.391Z,1513260830.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:50.785Z,1513260830.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:51.163Z,1513260831.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:51.556Z,1513260831.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:55.237Z,1513260835.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:55.323Z,1513260835.323 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0317.lzma
2017-12-14T14:13:55.382Z,1513260835.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:55.739Z,1513260835.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:56.064Z,1513260836.064 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0317.lzma.bak
2017-12-14T14:13:56.064Z,1513260836.064 [DataOverHttps](INFO): SBD MOMSN=5438946
2017-12-14T14:13:56.151Z,1513260836.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:57.446Z,1513260837.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:13:57.449Z,1513260837.449 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:13:57.450Z,1513260837.450 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:13:57.450Z,1513260837.450 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:13:57.575Z,1513260837.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:00.000Z,1513260841.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:01.147Z,1513260841.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:01.492Z,1513260841.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:01.898Z,1513260841.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:02.299Z,1513260842.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:02.675Z,1513260842.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:03.077Z,1513260843.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:03.479Z,1513260843.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:03.874Z,1513260843.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:04.283Z,1513260844.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:04.687Z,1513260844.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:05.084Z,1513260845.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:05.473Z,1513260845.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:05.870Z,1513260845.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:06.327Z,1513260846.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:06.681Z,1513260846.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:07.116Z,1513260847.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:07.475Z,1513260847.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:07.946Z,1513260847.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:08.272Z,1513260848.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:08.718Z,1513260848.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:09.079Z,1513260849.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:09.485Z,1513260849.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:09.884Z,1513260849.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:10.299Z,1513260850.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:10.679Z,1513260850.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:11.077Z,1513260851.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:11.525Z,1513260851.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:11.883Z,1513260851.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:12.284Z,1513260852.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:12.686Z,1513260852.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:13.082Z,1513260853.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:13.483Z,1513260853.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:13.885Z,1513260853.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:14.279Z,1513260854.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:14.723Z,1513260854.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:15.096Z,1513260855.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:15.476Z,1513260855.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:15.880Z,1513260855.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:16.302Z,1513260856.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:16.672Z,1513260856.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:17.097Z,1513260857.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:17.474Z,1513260857.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:17.871Z,1513260857.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:18.315Z,1513260858.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:18.684Z,1513260858.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:19.078Z,1513260859.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:19.471Z,1513260859.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:19.875Z,1513260859.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:20.275Z,1513260860.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:20.679Z,1513260860.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:21.123Z,1513260861.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:21.482Z,1513260861.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:21.882Z,1513260861.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:22.284Z,1513260862.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:22.691Z,1513260862.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:23.075Z,1513260863.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:23.477Z,1513260863.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:23.871Z,1513260863.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:24.360Z,1513260864.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:24.699Z,1513260864.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:25.086Z,1513260865.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:25.483Z,1513260865.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:25.877Z,1513260865.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:26.280Z,1513260866.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:26.680Z,1513260866.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:27.089Z,1513260867.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:27.548Z,1513260867.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:27.895Z,1513260867.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:28.291Z,1513260868.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:28.668Z,1513260868.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:29.167Z,1513260869.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:29.468Z,1513260869.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:29.875Z,1513260869.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:30.315Z,1513260870.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:30.715Z,1513260870.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:31.131Z,1513260871.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:31.479Z,1513260871.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:31.876Z,1513260871.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:32.269Z,1513260872.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:32.683Z,1513260872.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:33.069Z,1513260873.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:33.491Z,1513260873.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:33.920Z,1513260873.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:34.285Z,1513260874.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:34.677Z,1513260874.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:35.079Z,1513260875.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:35.482Z,1513260875.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:35.880Z,1513260875.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:36.323Z,1513260876.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:36.690Z,1513260876.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:37.152Z,1513260877.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:37.479Z,1513260877.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:37.886Z,1513260877.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:38.298Z,1513260878.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:38.680Z,1513260878.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:39.086Z,1513260879.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:39.532Z,1513260879.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:39.891Z,1513260879.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:40.312Z,1513260880.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:40.744Z,1513260880.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:41.083Z,1513260881.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:41.491Z,1513260881.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:41.889Z,1513260881.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:42.280Z,1513260882.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:42.676Z,1513260882.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:43.076Z,1513260883.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:43.536Z,1513260883.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:43.877Z,1513260883.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:44.280Z,1513260884.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:44.711Z,1513260884.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:45.088Z,1513260885.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:45.485Z,1513260885.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:45.498Z,1513260885.498 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T14:14:45.498Z,1513260885.498 [DropWeight] No Fault, FailCount= 1
2017-12-14T14:14:45.876Z,1513260885.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:46.286Z,1513260886.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:46.706Z,1513260886.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:47.069Z,1513260887.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:47.496Z,1513260887.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:47.943Z,1513260887.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:48.276Z,1513260888.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:48.673Z,1513260888.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:49.073Z,1513260889.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:49.484Z,1513260889.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:49.908Z,1513260889.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:50.276Z,1513260890.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:50.682Z,1513260890.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:51.081Z,1513260891.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:51.516Z,1513260891.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:51.874Z,1513260891.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:52.316Z,1513260892.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:52.675Z,1513260892.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:53.139Z,1513260893.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:53.529Z,1513260893.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:53.893Z,1513260893.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:54.300Z,1513260894.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:54.684Z,1513260894.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:55.080Z,1513260895.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:55.473Z,1513260895.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:55.872Z,1513260895.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:56.327Z,1513260896.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:56.684Z,1513260896.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:57.096Z,1513260897.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:57.472Z,1513260897.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:14:57.876Z,1513260897.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:01.366Z,1513260901.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:01.507Z,1513260901.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:01.805Z,1513260901.805 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:15:01.805Z,1513260901.805 [NAL9602] Data Fault, FailCount= 5
2017-12-14T14:15:01.806Z,1513260901.806 [NAL9602](ERROR): Data Fault
2017-12-14T14:15:01.837Z,1513260901.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:01.887Z,1513260901.887 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:15:01.887Z,1513260901.887 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T14:15:02.201Z,1513260902.201 [NAL9602](INFO): Powering down
2017-12-14T14:15:02.272Z,1513260902.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:02.283Z,1513260902.283 [CBIT](INFO): Critical error at 20171214T141501
2017-12-14T14:15:02.670Z,1513260902.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:03.035Z,1513260903.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:03.431Z,1513260903.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:03.835Z,1513260903.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:04.264Z,1513260904.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:04.635Z,1513260904.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:05.035Z,1513260905.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:05.434Z,1513260905.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:05.912Z,1513260905.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:06.304Z,1513260906.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:06.643Z,1513260906.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:07.035Z,1513260907.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:07.439Z,1513260907.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:07.835Z,1513260907.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:08.240Z,1513260908.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:08.647Z,1513260908.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:09.095Z,1513260909.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:09.441Z,1513260909.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:09.840Z,1513260909.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:10.245Z,1513260910.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:10.643Z,1513260910.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:11.050Z,1513260911.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:11.428Z,1513260911.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:11.849Z,1513260911.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:12.307Z,1513260912.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:12.652Z,1513260912.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:13.055Z,1513260913.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:13.475Z,1513260913.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:13.835Z,1513260913.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:14.258Z,1513260914.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:14.636Z,1513260914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:15.079Z,1513260915.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:15.469Z,1513260915.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:15.835Z,1513260915.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:16.255Z,1513260916.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:16.643Z,1513260916.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:17.035Z,1513260917.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:17.433Z,1513260917.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:17.840Z,1513260917.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:18.240Z,1513260918.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:18.681Z,1513260918.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:19.035Z,1513260919.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:19.436Z,1513260919.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:19.833Z,1513260919.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:20.295Z,1513260920.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:20.637Z,1513260920.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:21.042Z,1513260921.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:21.437Z,1513260921.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:21.887Z,1513260921.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:22.243Z,1513260922.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:22.647Z,1513260922.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:23.042Z,1513260923.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:23.460Z,1513260923.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:23.838Z,1513260923.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:24.235Z,1513260924.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:24.636Z,1513260924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:25.098Z,1513260925.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:25.440Z,1513260925.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:25.834Z,1513260925.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:26.249Z,1513260926.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:26.641Z,1513260926.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:27.038Z,1513260927.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:27.438Z,1513260927.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:27.842Z,1513260927.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:28.310Z,1513260928.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:28.640Z,1513260928.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:29.038Z,1513260929.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:29.426Z,1513260929.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:29.824Z,1513260929.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:30.243Z,1513260930.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:30.642Z,1513260930.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:31.048Z,1513260931.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:31.463Z,1513260931.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:31.846Z,1513260931.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:32.246Z,1513260932.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:32.652Z,1513260932.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:33.049Z,1513260933.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:33.451Z,1513260933.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:33.849Z,1513260933.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:34.276Z,1513260934.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:34.665Z,1513260934.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:35.083Z,1513260935.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:35.473Z,1513260935.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:35.834Z,1513260935.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:36.267Z,1513260936.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:36.642Z,1513260936.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:37.064Z,1513260937.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:37.436Z,1513260937.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:37.912Z,1513260937.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:38.236Z,1513260938.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:38.643Z,1513260938.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:39.039Z,1513260939.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:39.437Z,1513260939.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:39.836Z,1513260939.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:40.239Z,1513260940.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:40.636Z,1513260940.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:41.077Z,1513260941.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:41.443Z,1513260941.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:41.836Z,1513260941.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:42.238Z,1513260942.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:42.641Z,1513260942.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:43.033Z,1513260943.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:43.437Z,1513260943.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:43.832Z,1513260943.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:44.298Z,1513260944.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:44.638Z,1513260944.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:45.039Z,1513260945.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:45.472Z,1513260945.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:45.837Z,1513260945.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:46.294Z,1513260946.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:46.635Z,1513260946.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:47.026Z,1513260947.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:47.498Z,1513260947.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:47.834Z,1513260947.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:48.279Z,1513260948.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:48.638Z,1513260948.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:49.034Z,1513260949.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:49.436Z,1513260949.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:49.835Z,1513260949.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:50.234Z,1513260950.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:50.684Z,1513260950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:51.039Z,1513260951.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:51.437Z,1513260951.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:51.835Z,1513260951.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:52.234Z,1513260952.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:52.639Z,1513260952.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:53.037Z,1513260953.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:53.474Z,1513260953.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:53.876Z,1513260953.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:54.240Z,1513260954.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:54.639Z,1513260954.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:55.033Z,1513260955.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:55.432Z,1513260955.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:55.837Z,1513260955.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:56.246Z,1513260956.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:56.637Z,1513260956.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:57.075Z,1513260957.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:57.437Z,1513260957.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:57.903Z,1513260957.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:15:58.248Z,1513260958.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:01.679Z,1513260961.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:01.798Z,1513260961.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:02.237Z,1513260962.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:02.586Z,1513260962.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:02.980Z,1513260962.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:03.375Z,1513260963.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:03.784Z,1513260963.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:04.177Z,1513260964.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:04.602Z,1513260964.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:04.981Z,1513260964.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:05.366Z,1513260965.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:05.772Z,1513260965.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:06.172Z,1513260966.172 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:06.172Z,1513260966.172 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 274
2017-12-14T14:16:06.172Z,1513260966.172 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:16:06.199Z,1513260966.199 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:06.199Z,1513260966.199 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 274
2017-12-14T14:16:06.199Z,1513260966.199 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:16:06.206Z,1513260966.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:06.207Z,1513260966.207 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 274
2017-12-14T14:16:06.207Z,1513260966.207 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:16:06.231Z,1513260966.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:16:06.231Z,1513260966.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:16:06.231Z,1513260966.231 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:16:06.681Z,1513260966.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:16:06.681Z,1513260966.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 274
2017-12-14T14:16:06.681Z,1513260966.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:16:06.682Z,1513260966.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 274
2017-12-14T14:16:06.682Z,1513260966.682 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:16:06.682Z,1513260966.682 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 274
2017-12-14T14:16:06.962Z,1513260966.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:16:06.963Z,1513260966.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:16:06.963Z,1513260966.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:16:06.963Z,1513260966.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:16:06.964Z,1513260966.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:16:06.964Z,1513260966.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:16:06.981Z,1513260966.981 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:16:06.981Z,1513260966.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:16:06.981Z,1513260966.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:16:07.379Z,1513260967.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:07.768Z,1513260967.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:08.255Z,1513260968.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:08.590Z,1513260968.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:09.075Z,1513260969.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:09.372Z,1513260969.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:09.768Z,1513260969.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:10.258Z,1513260970.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:10.584Z,1513260970.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:10.980Z,1513260970.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:11.377Z,1513260971.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:11.775Z,1513260971.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:12.218Z,1513260972.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:12.592Z,1513260972.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:13.024Z,1513260973.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:13.382Z,1513260973.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:13.778Z,1513260973.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:14.242Z,1513260974.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:14.578Z,1513260974.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:14.983Z,1513260974.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:15.382Z,1513260975.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:15.778Z,1513260975.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:16.294Z,1513260976.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:16.589Z,1513260976.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:16.975Z,1513260976.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:17.376Z,1513260977.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:17.783Z,1513260977.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:18.210Z,1513260978.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:18.632Z,1513260978.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:18.985Z,1513260978.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:19.391Z,1513260979.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:19.823Z,1513260979.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:20.192Z,1513260980.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:20.624Z,1513260980.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:21.033Z,1513260981.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:21.402Z,1513260981.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:21.830Z,1513260981.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:22.348Z,1513260982.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:22.630Z,1513260982.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:23.021Z,1513260983.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:23.419Z,1513260983.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:23.804Z,1513260983.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:24.255Z,1513260984.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:24.619Z,1513260984.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:24.979Z,1513260984.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:25.400Z,1513260985.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:25.779Z,1513260985.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:26.266Z,1513260986.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:26.603Z,1513260986.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:26.998Z,1513260986.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:27.406Z,1513260987.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:27.788Z,1513260987.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:28.254Z,1513260988.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:28.588Z,1513260988.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:28.988Z,1513260988.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:29.409Z,1513260989.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:29.787Z,1513260989.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:30.291Z,1513260990.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:30.613Z,1513260990.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:31.029Z,1513260991.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:31.389Z,1513260991.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:31.820Z,1513260991.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:32.179Z,1513260992.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:32.611Z,1513260992.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:33.039Z,1513260993.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:33.406Z,1513260993.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:33.788Z,1513260993.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:34.198Z,1513260994.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:34.611Z,1513260994.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:35.007Z,1513260995.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:35.396Z,1513260995.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:35.799Z,1513260995.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:36.228Z,1513260996.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:36.610Z,1513260996.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:37.004Z,1513260997.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:37.409Z,1513260997.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:37.807Z,1513260997.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:38.226Z,1513260998.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:38.579Z,1513260998.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:38.979Z,1513260998.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:39.427Z,1513260999.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:39.836Z,1513260999.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:40.239Z,1513261000.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:40.603Z,1513261000.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:41.030Z,1513261001.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:41.405Z,1513261001.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:41.784Z,1513261001.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:42.240Z,1513261002.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:42.668Z,1513261002.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:43.000Z,1513261003.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:43.403Z,1513261003.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:43.804Z,1513261003.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:44.312Z,1513261004.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:44.636Z,1513261004.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:44.984Z,1513261004.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:45.435Z,1513261005.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:45.788Z,1513261005.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:46.219Z,1513261006.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:46.604Z,1513261006.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:46.976Z,1513261006.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:47.372Z,1513261007.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:47.775Z,1513261007.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:48.173Z,1513261008.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:48.611Z,1513261008.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:48.975Z,1513261008.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:49.512Z,1513261009.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:49.780Z,1513261009.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:50.238Z,1513261010.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:50.591Z,1513261010.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:50.979Z,1513261010.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:51.379Z,1513261011.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:51.781Z,1513261011.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:52.284Z,1513261012.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:52.588Z,1513261012.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:52.987Z,1513261012.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:53.389Z,1513261013.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:53.767Z,1513261013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:54.264Z,1513261014.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:54.592Z,1513261014.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:54.969Z,1513261014.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:55.393Z,1513261015.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:55.839Z,1513261015.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:56.270Z,1513261016.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:56.614Z,1513261016.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:56.982Z,1513261016.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:57.426Z,1513261017.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:57.771Z,1513261017.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:58.228Z,1513261018.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:16:58.600Z,1513261018.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:01.874Z,1513261021.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:01.887Z,1513261021.887 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:17:01.887Z,1513261021.887 [NAL9602] No Fault, FailCount= 5
2017-12-14T14:17:01.939Z,1513261021.939 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:17:02.041Z,1513261022.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:02.339Z,1513261022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:02.738Z,1513261022.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:03.138Z,1513261023.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:03.539Z,1513261023.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:03.944Z,1513261023.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:04.343Z,1513261024.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:04.739Z,1513261024.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:05.143Z,1513261025.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:05.547Z,1513261025.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:05.963Z,1513261025.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:06.360Z,1513261026.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:06.742Z,1513261026.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:07.163Z,1513261027.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:07.550Z,1513261027.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:07.971Z,1513261027.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:08.344Z,1513261028.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:08.739Z,1513261028.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:09.138Z,1513261029.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:09.538Z,1513261029.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:09.939Z,1513261029.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:10.338Z,1513261030.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:10.739Z,1513261030.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:11.226Z,1513261031.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:11.550Z,1513261031.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:11.960Z,1513261031.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:12.370Z,1513261032.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:12.759Z,1513261032.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:13.106Z,1513261033.106 [NAL9602](INFO): NAL9602 initialized
2017-12-14T14:17:13.167Z,1513261033.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:13.547Z,1513261033.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:13.953Z,1513261033.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:14.353Z,1513261034.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:14.776Z,1513261034.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:15.153Z,1513261035.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:15.552Z,1513261035.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:16.060Z,1513261036.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:16.365Z,1513261036.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:16.776Z,1513261036.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:17.163Z,1513261037.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:17.559Z,1513261037.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:17.959Z,1513261037.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:18.355Z,1513261038.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:18.763Z,1513261038.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:19.164Z,1513261039.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:19.575Z,1513261039.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:19.968Z,1513261039.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:20.379Z,1513261040.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:20.784Z,1513261040.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:21.146Z,1513261041.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:21.549Z,1513261041.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:21.951Z,1513261041.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:22.353Z,1513261042.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:22.775Z,1513261042.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:23.151Z,1513261043.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:23.549Z,1513261043.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:23.000Z,1513261044.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:24.355Z,1513261044.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:24.763Z,1513261044.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:25.155Z,1513261045.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:25.562Z,1513261045.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:25.975Z,1513261045.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:26.363Z,1513261046.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:26.806Z,1513261046.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:27.162Z,1513261047.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:27.539Z,1513261047.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:27.943Z,1513261047.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:28.427Z,1513261048.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:28.753Z,1513261048.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:29.191Z,1513261049.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:29.551Z,1513261049.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:29.979Z,1513261049.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:30.434Z,1513261050.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:30.746Z,1513261050.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:31.164Z,1513261051.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:31.566Z,1513261051.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:31.973Z,1513261051.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:32.352Z,1513261052.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:32.754Z,1513261052.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:33.152Z,1513261053.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:33.563Z,1513261053.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:33.962Z,1513261053.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:34.363Z,1513261054.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:34.759Z,1513261054.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:35.151Z,1513261055.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:35.551Z,1513261055.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:35.949Z,1513261055.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:36.363Z,1513261056.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:36.802Z,1513261056.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:37.175Z,1513261057.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:37.543Z,1513261057.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:37.977Z,1513261057.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:38.379Z,1513261058.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:38.749Z,1513261058.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:39.143Z,1513261059.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:39.575Z,1513261059.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:40.023Z,1513261060.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:40.374Z,1513261060.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:40.747Z,1513261060.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:41.147Z,1513261061.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:41.544Z,1513261061.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:41.948Z,1513261061.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:42.376Z,1513261062.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:42.777Z,1513261062.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:43.191Z,1513261063.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:43.551Z,1513261063.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:43.946Z,1513261063.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:44.346Z,1513261064.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:44.746Z,1513261064.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:45.153Z,1513261065.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:45.554Z,1513261065.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:45.980Z,1513261065.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:46.353Z,1513261066.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:46.754Z,1513261066.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:47.151Z,1513261067.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:47.550Z,1513261067.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:47.952Z,1513261067.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:48.366Z,1513261068.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:48.774Z,1513261068.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:49.159Z,1513261069.159 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T14:17:49.159Z,1513261069.159 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:17:49.159Z,1513261069.159 [BPC1](ERROR): Data Fault
2017-12-14T14:17:49.168Z,1513261069.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:49.181Z,1513261069.181 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:17:49.552Z,1513261069.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:49.951Z,1513261069.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:50.384Z,1513261070.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:50.415Z,1513261070.415 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:17:50.415Z,1513261070.415 [BPC1] No Fault, FailCount= 1
2017-12-14T14:17:50.791Z,1513261070.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:51.151Z,1513261071.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:51.561Z,1513261071.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:51.960Z,1513261071.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:52.365Z,1513261072.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:52.760Z,1513261072.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:53.147Z,1513261073.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:53.588Z,1513261073.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:53.998Z,1513261073.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:54.357Z,1513261074.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:54.764Z,1513261074.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:55.166Z,1513261075.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:55.537Z,1513261075.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:55.939Z,1513261075.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:56.347Z,1513261076.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:56.814Z,1513261076.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:57.151Z,1513261077.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:57.558Z,1513261077.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:57.956Z,1513261077.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:58.363Z,1513261078.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:17:58.763Z,1513261078.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:02.239Z,1513261082.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:02.372Z,1513261082.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:02.736Z,1513261082.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:03.167Z,1513261083.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:03.516Z,1513261083.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:03.920Z,1513261083.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:04.317Z,1513261084.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:04.720Z,1513261084.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:05.112Z,1513261085.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:05.522Z,1513261085.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:05.924Z,1513261085.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:06.352Z,1513261086.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:06.721Z,1513261086.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:07.117Z,1513261087.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:07.512Z,1513261087.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:07.916Z,1513261087.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:08.320Z,1513261088.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:08.721Z,1513261088.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:09.122Z,1513261089.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:09.568Z,1513261089.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:09.912Z,1513261089.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:10.311Z,1513261090.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:10.723Z,1513261090.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:11.112Z,1513261091.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:11.527Z,1513261091.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:11.925Z,1513261091.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:12.324Z,1513261092.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:12.759Z,1513261092.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:13.135Z,1513261093.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:13.508Z,1513261093.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:13.931Z,1513261093.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:14.351Z,1513261094.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:14.739Z,1513261094.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:15.179Z,1513261095.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:15.512Z,1513261095.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:15.984Z,1513261095.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:16.311Z,1513261096.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:16.715Z,1513261096.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:17.111Z,1513261097.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:17.545Z,1513261097.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:17.913Z,1513261097.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:18.319Z,1513261098.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:18.710Z,1513261098.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:19.160Z,1513261099.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:19.511Z,1513261099.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:19.913Z,1513261099.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:20.316Z,1513261100.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:20.716Z,1513261100.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:21.116Z,1513261101.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:21.514Z,1513261101.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:21.913Z,1513261101.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:22.374Z,1513261102.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:22.716Z,1513261102.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:23.123Z,1513261103.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:23.525Z,1513261103.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:23.920Z,1513261103.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:24.340Z,1513261104.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:24.707Z,1513261104.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:25.123Z,1513261105.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:25.586Z,1513261105.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:25.931Z,1513261105.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:26.327Z,1513261106.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:26.735Z,1513261106.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:27.132Z,1513261107.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:27.527Z,1513261107.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:27.909Z,1513261107.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:28.384Z,1513261108.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:28.786Z,1513261108.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:29.112Z,1513261109.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:29.515Z,1513261109.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:29.939Z,1513261109.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:30.319Z,1513261110.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:30.712Z,1513261110.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:31.111Z,1513261111.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:31.516Z,1513261111.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:31.948Z,1513261111.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:32.316Z,1513261112.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:32.738Z,1513261112.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:33.116Z,1513261113.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:33.512Z,1513261113.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:33.910Z,1513261113.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:34.315Z,1513261114.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:34.713Z,1513261114.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:35.211Z,1513261115.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:35.539Z,1513261115.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:35.931Z,1513261115.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:36.339Z,1513261116.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:36.736Z,1513261116.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:37.119Z,1513261117.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:37.543Z,1513261117.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:37.918Z,1513261117.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:38.383Z,1513261118.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:38.729Z,1513261118.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:39.132Z,1513261119.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:39.521Z,1513261119.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:39.922Z,1513261119.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:40.323Z,1513261120.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:40.722Z,1513261120.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:41.124Z,1513261121.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:41.526Z,1513261121.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:41.943Z,1513261121.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:42.320Z,1513261122.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:42.723Z,1513261122.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:43.104Z,1513261123.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:43.508Z,1513261123.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:43.918Z,1513261123.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:44.316Z,1513261124.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:44.744Z,1513261124.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:45.126Z,1513261125.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:45.517Z,1513261125.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:45.912Z,1513261125.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:46.323Z,1513261126.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:46.759Z,1513261126.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:47.112Z,1513261127.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:47.527Z,1513261127.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:47.983Z,1513261127.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:48.321Z,1513261128.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:48.719Z,1513261128.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:49.107Z,1513261129.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:49.515Z,1513261129.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:49.910Z,1513261129.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:50.320Z,1513261130.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:50.744Z,1513261130.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:51.202Z,1513261131.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:51.513Z,1513261131.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:51.916Z,1513261131.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:52.315Z,1513261132.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:52.711Z,1513261132.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:53.112Z,1513261133.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:53.517Z,1513261133.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:53.943Z,1513261133.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:54.364Z,1513261134.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:54.713Z,1513261134.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:55.116Z,1513261135.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:55.516Z,1513261135.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:55.919Z,1513261135.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:56.346Z,1513261136.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:56.726Z,1513261136.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:57.125Z,1513261137.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:57.531Z,1513261137.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:57.915Z,1513261137.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:57.918Z,1513261137.918 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T14:18:57.919Z,1513261137.919 [Default:CheckIn:C.Wait] Stopped
2017-12-14T14:18:57.919Z,1513261137.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T14:18:57.919Z,1513261137.919 [Default:CheckIn:D] Running Loop=1
2017-12-14T14:18:58.320Z,1513261138.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:58.324Z,1513261138.324 [Default:CheckIn:D] Stopped
2017-12-14T14:18:58.324Z,1513261138.324 [Default:CheckIn:E] Running Loop=1
2017-12-14T14:18:58.754Z,1513261138.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:18:58.762Z,1513261138.762 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 825.715560 min 
2017-12-14T14:18:58.762Z,1513261138.762 [Default:CheckIn:E] Stopped
2017-12-14T14:18:58.762Z,1513261138.762 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn] Stopped
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn](INFO): Running loop #80
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn] Running Loop=80
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T14:18:58.763Z,1513261138.763 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T14:18:59.122Z,1513261139.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:02.678Z,1513261142.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:02.823Z,1513261142.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:03.216Z,1513261143.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:03.576Z,1513261143.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:03.990Z,1513261143.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:04.374Z,1513261144.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:04.755Z,1513261144.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:05.152Z,1513261145.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:05.557Z,1513261145.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:05.960Z,1513261145.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:06.381Z,1513261146.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:06.752Z,1513261146.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:07.232Z,1513261147.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:07.232Z,1513261147.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 275
2017-12-14T14:19:07.232Z,1513261147.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:19:07.235Z,1513261147.235 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:07.235Z,1513261147.235 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 275
2017-12-14T14:19:07.235Z,1513261147.235 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:19:07.237Z,1513261147.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:07.237Z,1513261147.237 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 275
2017-12-14T14:19:07.237Z,1513261147.237 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:19:07.261Z,1513261147.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:19:07.261Z,1513261147.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:19:07.262Z,1513261147.262 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:19:07.582Z,1513261147.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:19:07.582Z,1513261147.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 275
2017-12-14T14:19:07.583Z,1513261147.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:19:07.583Z,1513261147.583 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 275
2017-12-14T14:19:07.583Z,1513261147.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:19:07.583Z,1513261147.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 275
2017-12-14T14:19:07.956Z,1513261147.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:19:07.956Z,1513261147.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:19:07.957Z,1513261147.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:19:07.957Z,1513261147.957 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:19:07.957Z,1513261147.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:19:07.958Z,1513261147.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:19:07.958Z,1513261147.958 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:19:07.958Z,1513261147.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:19:07.959Z,1513261147.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:19:08.365Z,1513261148.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:08.766Z,1513261148.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:09.175Z,1513261149.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:09.560Z,1513261149.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:09.963Z,1513261149.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:10.400Z,1513261150.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:10.759Z,1513261150.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:11.159Z,1513261151.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:11.600Z,1513261151.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:11.971Z,1513261151.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:12.371Z,1513261152.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:12.758Z,1513261152.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:13.165Z,1513261153.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:13.611Z,1513261153.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:13.958Z,1513261153.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:14.368Z,1513261154.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:14.772Z,1513261154.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:15.172Z,1513261155.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:15.563Z,1513261155.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:15.943Z,1513261155.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:16.368Z,1513261156.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:16.818Z,1513261156.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:17.147Z,1513261157.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:17.571Z,1513261157.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:17.975Z,1513261157.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:18.373Z,1513261158.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:18.748Z,1513261158.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:19.148Z,1513261159.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:19.575Z,1513261159.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:19.993Z,1513261159.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:20.044Z,1513261160.044 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:19:20.378Z,1513261160.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:20.779Z,1513261160.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:21.179Z,1513261161.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:21.560Z,1513261161.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:22.006Z,1513261162.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:22.354Z,1513261162.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:22.761Z,1513261162.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:23.189Z,1513261163.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:23.606Z,1513261163.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:23.967Z,1513261163.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:24.398Z,1513261164.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:24.767Z,1513261164.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:25.191Z,1513261165.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:25.557Z,1513261165.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:25.960Z,1513261165.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:26.363Z,1513261166.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:26.766Z,1513261166.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:27.166Z,1513261167.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:27.555Z,1513261167.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:27.955Z,1513261167.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:28.352Z,1513261168.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:28.753Z,1513261168.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:29.159Z,1513261169.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:29.627Z,1513261169.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:29.972Z,1513261169.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:30.361Z,1513261170.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:30.752Z,1513261170.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:31.152Z,1513261171.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:31.550Z,1513261171.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:31.953Z,1513261171.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:32.358Z,1513261172.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:32.799Z,1513261172.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:33.154Z,1513261173.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:33.584Z,1513261173.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:34.087Z,1513261174.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:34.350Z,1513261174.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:34.767Z,1513261174.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:35.157Z,1513261175.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:35.571Z,1513261175.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:36.050Z,1513261176.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:36.360Z,1513261176.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:36.757Z,1513261176.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:37.164Z,1513261177.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:37.563Z,1513261177.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:37.959Z,1513261177.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:38.362Z,1513261178.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:38.768Z,1513261178.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:39.195Z,1513261179.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:39.564Z,1513261179.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:39.987Z,1513261179.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:40.363Z,1513261180.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:40.747Z,1513261180.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:41.171Z,1513261181.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:41.570Z,1513261181.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:41.970Z,1513261181.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:42.384Z,1513261182.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:42.774Z,1513261182.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:43.175Z,1513261183.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:43.548Z,1513261183.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:43.948Z,1513261183.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:44.403Z,1513261184.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:44.774Z,1513261184.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:45.182Z,1513261185.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:45.587Z,1513261185.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:46.007Z,1513261186.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:46.365Z,1513261186.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:46.752Z,1513261186.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:47.199Z,1513261187.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:47.560Z,1513261187.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:47.988Z,1513261187.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:48.371Z,1513261188.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:48.799Z,1513261188.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:49.164Z,1513261189.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:49.559Z,1513261189.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:49.706Z,1513261189.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:19:49.952Z,1513261189.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:50.366Z,1513261190.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:50.503Z,1513261190.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:19:50.766Z,1513261190.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:50.913Z,1513261190.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:19:51.168Z,1513261191.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:51.554Z,1513261191.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:51.999Z,1513261191.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:52.352Z,1513261192.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:52.760Z,1513261192.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:53.156Z,1513261193.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:53.571Z,1513261193.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:53.970Z,1513261193.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:54.361Z,1513261194.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:54.759Z,1513261194.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:55.157Z,1513261195.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:55.559Z,1513261195.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:55.955Z,1513261195.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:56.405Z,1513261196.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:56.766Z,1513261196.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:57.164Z,1513261197.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:57.570Z,1513261197.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:57.973Z,1513261197.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:58.387Z,1513261198.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:58.771Z,1513261198.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:19:59.170Z,1513261199.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:02.666Z,1513261202.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:02.812Z,1513261202.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:03.175Z,1513261203.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:03.552Z,1513261203.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:03.722Z,1513261203.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:03.952Z,1513261203.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:04.348Z,1513261204.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:04.518Z,1513261204.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:04.776Z,1513261204.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:04.921Z,1513261204.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:05.148Z,1513261205.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:05.591Z,1513261205.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:05.982Z,1513261205.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:06.379Z,1513261206.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:06.761Z,1513261206.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:07.153Z,1513261207.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:07.587Z,1513261207.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:07.954Z,1513261207.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:08.407Z,1513261208.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:08.792Z,1513261208.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:09.191Z,1513261209.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:09.553Z,1513261209.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:09.991Z,1513261209.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:10.351Z,1513261210.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:10.757Z,1513261210.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:11.152Z,1513261211.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:11.557Z,1513261211.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:12.043Z,1513261212.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:12.371Z,1513261212.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:12.763Z,1513261212.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:13.155Z,1513261213.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:13.567Z,1513261213.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:13.946Z,1513261213.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:14.371Z,1513261214.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:14.776Z,1513261214.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:15.169Z,1513261215.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:15.552Z,1513261215.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:15.948Z,1513261215.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:16.349Z,1513261216.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:16.754Z,1513261216.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:17.152Z,1513261217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:17.556Z,1513261217.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:17.705Z,1513261217.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:17.976Z,1513261217.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:18.431Z,1513261218.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:18.503Z,1513261218.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:18.760Z,1513261218.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:18.933Z,1513261218.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:19.151Z,1513261219.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:19.564Z,1513261219.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:19.730Z,1513261219.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:19.959Z,1513261219.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:20.367Z,1513261220.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:20.525Z,1513261220.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:20.767Z,1513261220.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:20.929Z,1513261220.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:21.175Z,1513261221.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:21.563Z,1513261221.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:21.970Z,1513261221.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:22.363Z,1513261222.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:22.763Z,1513261222.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:23.159Z,1513261223.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:23.616Z,1513261223.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:23.971Z,1513261223.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:24.371Z,1513261224.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:24.795Z,1513261224.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:25.152Z,1513261225.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:25.549Z,1513261225.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:25.954Z,1513261225.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:26.380Z,1513261226.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:26.777Z,1513261226.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:27.181Z,1513261227.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:27.553Z,1513261227.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:27.980Z,1513261227.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:28.352Z,1513261228.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:28.759Z,1513261228.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:29.154Z,1513261229.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:29.556Z,1513261229.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:29.961Z,1513261229.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:30.410Z,1513261230.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:30.760Z,1513261230.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:31.211Z,1513261231.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:31.559Z,1513261231.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:31.714Z,1513261231.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:31.967Z,1513261231.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:32.367Z,1513261232.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:32.511Z,1513261232.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:32.766Z,1513261232.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:32.918Z,1513261232.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:33.171Z,1513261233.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:33.551Z,1513261233.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:33.715Z,1513261233.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:33.963Z,1513261233.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:34.426Z,1513261234.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:34.510Z,1513261234.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:34.764Z,1513261234.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:34.913Z,1513261234.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:20:35.159Z,1513261235.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:35.568Z,1513261235.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:36.030Z,1513261236.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:36.363Z,1513261236.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:36.763Z,1513261236.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:37.165Z,1513261237.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:37.587Z,1513261237.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:37.946Z,1513261237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:38.369Z,1513261238.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:38.776Z,1513261238.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:39.176Z,1513261239.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:39.550Z,1513261239.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:39.952Z,1513261239.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:40.387Z,1513261240.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:40.751Z,1513261240.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:41.152Z,1513261241.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:41.580Z,1513261241.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:41.973Z,1513261241.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:42.354Z,1513261242.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:42.749Z,1513261242.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:43.151Z,1513261243.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:43.557Z,1513261243.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:43.951Z,1513261243.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:44.356Z,1513261244.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:44.763Z,1513261244.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:45.158Z,1513261245.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:45.554Z,1513261245.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:45.955Z,1513261245.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:46.354Z,1513261246.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:46.759Z,1513261246.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:47.199Z,1513261247.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:47.568Z,1513261247.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:47.961Z,1513261247.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:48.387Z,1513261248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:48.763Z,1513261248.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:49.172Z,1513261249.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:49.558Z,1513261249.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:49.950Z,1513261249.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:50.447Z,1513261250.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:50.773Z,1513261250.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:51.167Z,1513261251.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:51.563Z,1513261251.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:51.963Z,1513261251.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:52.395Z,1513261252.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:52.751Z,1513261252.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:53.149Z,1513261253.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:53.638Z,1513261253.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:53.979Z,1513261253.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:54.396Z,1513261254.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:54.754Z,1513261254.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:55.152Z,1513261255.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:55.558Z,1513261255.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:55.951Z,1513261255.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:56.362Z,1513261256.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:56.792Z,1513261256.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:57.164Z,1513261257.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:57.550Z,1513261257.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:57.959Z,1513261257.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:58.359Z,1513261258.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:58.759Z,1513261258.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:59.156Z,1513261259.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:20:59.565Z,1513261259.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:03.072Z,1513261263.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:03.263Z,1513261263.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:03.571Z,1513261263.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:03.975Z,1513261263.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:04.366Z,1513261264.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:04.768Z,1513261264.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:05.168Z,1513261265.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:05.569Z,1513261265.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:05.999Z,1513261265.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:06.405Z,1513261266.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:06.766Z,1513261266.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:07.164Z,1513261267.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:07.572Z,1513261267.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:07.971Z,1513261267.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:08.403Z,1513261268.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:08.779Z,1513261268.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:09.174Z,1513261269.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:09.613Z,1513261269.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:09.968Z,1513261269.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:10.368Z,1513261270.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:10.771Z,1513261270.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:11.172Z,1513261271.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:11.579Z,1513261271.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:11.980Z,1513261271.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:12.377Z,1513261272.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:12.783Z,1513261272.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:13.179Z,1513261273.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:13.576Z,1513261273.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:13.968Z,1513261273.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:14.378Z,1513261274.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:14.826Z,1513261274.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:15.234Z,1513261275.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:15.572Z,1513261275.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:16.065Z,1513261276.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:16.370Z,1513261276.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:16.807Z,1513261276.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:17.207Z,1513261277.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:17.578Z,1513261277.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:17.985Z,1513261277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:18.392Z,1513261278.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:18.818Z,1513261278.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:19.255Z,1513261279.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:19.573Z,1513261279.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:19.987Z,1513261279.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:20.439Z,1513261280.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:20.799Z,1513261280.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:21.195Z,1513261281.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:21.629Z,1513261281.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:22.000Z,1513261282.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:22.388Z,1513261282.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:22.810Z,1513261282.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:23.176Z,1513261283.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:23.573Z,1513261283.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:23.975Z,1513261283.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:24.373Z,1513261284.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:24.773Z,1513261284.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:25.318Z,1513261285.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:25.598Z,1513261285.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:26.019Z,1513261286.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:26.379Z,1513261286.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:26.820Z,1513261286.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:27.184Z,1513261287.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:27.579Z,1513261287.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:27.990Z,1513261287.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:28.402Z,1513261288.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:28.776Z,1513261288.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:29.251Z,1513261289.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:29.596Z,1513261289.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:30.008Z,1513261290.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:30.442Z,1513261290.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:30.792Z,1513261290.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:31.197Z,1513261291.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:31.618Z,1513261291.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:32.019Z,1513261292.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:32.462Z,1513261292.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:32.793Z,1513261292.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:33.241Z,1513261293.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:33.644Z,1513261293.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:34.007Z,1513261294.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:34.384Z,1513261294.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:34.851Z,1513261294.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:35.172Z,1513261295.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:35.663Z,1513261295.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:35.995Z,1513261295.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:36.395Z,1513261296.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:36.789Z,1513261296.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:37.191Z,1513261297.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:37.592Z,1513261297.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:37.980Z,1513261297.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:38.411Z,1513261298.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:38.779Z,1513261298.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:39.176Z,1513261299.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:39.572Z,1513261299.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:40.005Z,1513261300.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:40.363Z,1513261300.363 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:21:40.363Z,1513261300.363 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:21:40.363Z,1513261300.363 [BPC1](ERROR): Communications Fault
2017-12-14T14:21:40.375Z,1513261300.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:40.438Z,1513261300.438 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:21:40.791Z,1513261300.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:41.206Z,1513261301.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:41.591Z,1513261301.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:41.645Z,1513261301.645 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:21:41.645Z,1513261301.645 [BPC1] No Fault, FailCount= 1
2017-12-14T14:21:42.101Z,1513261302.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:42.442Z,1513261302.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:42.775Z,1513261302.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:43.179Z,1513261303.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:43.609Z,1513261303.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:43.972Z,1513261303.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:44.380Z,1513261304.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:44.800Z,1513261304.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:45.195Z,1513261305.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:45.571Z,1513261305.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:45.000Z,1513261306.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:46.402Z,1513261306.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:46.775Z,1513261306.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:47.218Z,1513261307.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:47.575Z,1513261307.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:47.994Z,1513261307.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:48.446Z,1513261308.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:48.795Z,1513261308.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:49.185Z,1513261309.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:49.559Z,1513261309.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:49.982Z,1513261309.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:50.434Z,1513261310.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:50.793Z,1513261310.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:51.191Z,1513261311.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:51.560Z,1513261311.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:51.000Z,1513261312.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:52.368Z,1513261312.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:52.777Z,1513261312.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:53.174Z,1513261313.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:53.615Z,1513261313.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:53.983Z,1513261313.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:54.377Z,1513261314.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:54.773Z,1513261314.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:55.188Z,1513261315.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:55.575Z,1513261315.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:55.975Z,1513261315.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:56.378Z,1513261316.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:56.779Z,1513261316.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:57.177Z,1513261317.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:57.570Z,1513261317.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:57.978Z,1513261317.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:58.369Z,1513261318.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:58.779Z,1513261318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:59.246Z,1513261319.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:21:59.591Z,1513261319.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:03.262Z,1513261323.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:03.399Z,1513261323.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:03.758Z,1513261323.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:04.227Z,1513261324.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:04.535Z,1513261324.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:04.978Z,1513261324.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:05.360Z,1513261325.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:05.767Z,1513261325.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:06.204Z,1513261326.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:06.551Z,1513261326.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:06.948Z,1513261326.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:07.336Z,1513261327.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:07.745Z,1513261327.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:08.187Z,1513261328.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:08.188Z,1513261328.188 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 276
2017-12-14T14:22:08.188Z,1513261328.188 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:22:08.190Z,1513261328.190 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:08.190Z,1513261328.190 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 276
2017-12-14T14:22:08.190Z,1513261328.190 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:22:08.192Z,1513261328.192 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:08.192Z,1513261328.192 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 276
2017-12-14T14:22:08.192Z,1513261328.192 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:22:08.237Z,1513261328.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:22:08.237Z,1513261328.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:22:08.237Z,1513261328.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:22:08.599Z,1513261328.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:22:08.599Z,1513261328.599 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 276
2017-12-14T14:22:08.599Z,1513261328.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:22:08.599Z,1513261328.599 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 276
2017-12-14T14:22:08.600Z,1513261328.600 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:22:08.600Z,1513261328.600 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 276
2017-12-14T14:22:08.947Z,1513261328.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:22:08.948Z,1513261328.948 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:22:08.948Z,1513261328.948 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:22:08.948Z,1513261328.948 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:22:08.949Z,1513261328.949 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:22:08.949Z,1513261328.949 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:22:08.950Z,1513261328.950 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:22:08.950Z,1513261328.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:22:08.950Z,1513261328.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:22:09.355Z,1513261329.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:09.742Z,1513261329.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:10.139Z,1513261330.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:10.583Z,1513261330.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:10.996Z,1513261330.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:11.357Z,1513261331.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:11.811Z,1513261331.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:12.209Z,1513261332.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:12.546Z,1513261332.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:12.948Z,1513261332.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:13.396Z,1513261333.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:13.749Z,1513261333.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:14.220Z,1513261334.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:14.568Z,1513261334.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:14.959Z,1513261334.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:15.359Z,1513261335.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:15.742Z,1513261335.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:16.239Z,1513261336.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:16.554Z,1513261336.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:16.946Z,1513261336.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:17.349Z,1513261337.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:17.747Z,1513261337.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:18.198Z,1513261338.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:18.539Z,1513261338.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:18.935Z,1513261338.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:19.339Z,1513261339.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:19.786Z,1513261339.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:20.139Z,1513261340.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:20.610Z,1513261340.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:20.973Z,1513261340.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:21.355Z,1513261341.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:21.743Z,1513261341.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:22.143Z,1513261342.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:22.576Z,1513261342.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:22.947Z,1513261342.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:23.358Z,1513261343.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:23.803Z,1513261343.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:24.223Z,1513261344.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:24.559Z,1513261344.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:24.940Z,1513261344.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:25.391Z,1513261345.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:25.745Z,1513261345.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:26.242Z,1513261346.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:26.575Z,1513261346.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:27.011Z,1513261347.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:27.358Z,1513261347.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:27.754Z,1513261347.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:28.204Z,1513261348.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:28.540Z,1513261348.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:28.971Z,1513261348.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:29.358Z,1513261349.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:29.768Z,1513261349.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:30.244Z,1513261350.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:30.556Z,1513261350.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:30.947Z,1513261350.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:31.346Z,1513261351.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:31.736Z,1513261351.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:32.206Z,1513261352.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:32.571Z,1513261352.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:32.953Z,1513261352.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:33.355Z,1513261353.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:33.762Z,1513261353.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:34.143Z,1513261354.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:34.546Z,1513261354.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:34.946Z,1513261354.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:35.384Z,1513261355.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:35.757Z,1513261355.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:36.154Z,1513261356.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:36.621Z,1513261356.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:36.954Z,1513261356.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:37.347Z,1513261357.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:37.736Z,1513261357.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:38.135Z,1513261358.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:38.588Z,1513261358.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:38.961Z,1513261358.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:39.392Z,1513261359.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:39.735Z,1513261359.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:40.211Z,1513261360.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:40.555Z,1513261360.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:40.940Z,1513261360.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:41.344Z,1513261361.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:41.763Z,1513261361.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:42.208Z,1513261362.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:42.528Z,1513261362.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:43.003Z,1513261363.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:43.332Z,1513261363.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:43.760Z,1513261363.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:44.209Z,1513261364.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:44.552Z,1513261364.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:44.963Z,1513261364.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:45.359Z,1513261365.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:45.787Z,1513261365.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:46.273Z,1513261366.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:46.545Z,1513261366.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:46.944Z,1513261366.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:47.371Z,1513261367.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:47.790Z,1513261367.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:48.151Z,1513261368.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:48.580Z,1513261368.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:48.943Z,1513261368.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:49.407Z,1513261369.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:49.892Z,1513261369.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:50.139Z,1513261370.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:50.597Z,1513261370.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:50.960Z,1513261370.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:51.346Z,1513261371.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:51.744Z,1513261371.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:52.142Z,1513261372.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:52.623Z,1513261372.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:52.954Z,1513261372.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:53.347Z,1513261373.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:53.748Z,1513261373.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:54.193Z,1513261374.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:54.553Z,1513261374.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:55.012Z,1513261375.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:55.328Z,1513261375.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:55.727Z,1513261375.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:56.210Z,1513261376.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:56.557Z,1513261376.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:56.950Z,1513261376.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:57.354Z,1513261377.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:57.764Z,1513261377.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:58.197Z,1513261378.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:58.567Z,1513261378.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:58.984Z,1513261378.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:59.361Z,1513261379.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:22:59.771Z,1513261379.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:03.524Z,1513261383.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:03.659Z,1513261383.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:03.993Z,1513261383.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:04.409Z,1513261384.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:04.795Z,1513261384.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:05.207Z,1513261385.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:05.601Z,1513261385.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:06.004Z,1513261386.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:06.401Z,1513261386.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:06.806Z,1513261386.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:07.211Z,1513261387.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:07.613Z,1513261387.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:08.027Z,1513261388.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:08.416Z,1513261388.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:08.817Z,1513261388.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:09.216Z,1513261389.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:09.623Z,1513261389.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:10.043Z,1513261390.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:10.395Z,1513261390.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:10.807Z,1513261390.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:11.231Z,1513261391.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:11.648Z,1513261391.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:12.039Z,1513261392.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:12.403Z,1513261392.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:12.799Z,1513261392.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:13.211Z,1513261393.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:13.603Z,1513261393.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:14.004Z,1513261394.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:14.395Z,1513261394.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:14.818Z,1513261394.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:15.215Z,1513261395.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:15.610Z,1513261395.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:16.009Z,1513261396.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:16.406Z,1513261396.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:16.803Z,1513261396.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:17.205Z,1513261397.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:17.611Z,1513261397.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:18.016Z,1513261398.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:18.406Z,1513261398.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:18.839Z,1513261398.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:19.224Z,1513261399.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:19.619Z,1513261399.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:20.021Z,1513261400.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:20.427Z,1513261400.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:20.809Z,1513261400.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:21.219Z,1513261401.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:21.615Z,1513261401.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:22.011Z,1513261402.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:22.403Z,1513261402.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:22.800Z,1513261402.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:23.215Z,1513261403.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:23.609Z,1513261403.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:24.015Z,1513261404.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:24.404Z,1513261404.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:24.796Z,1513261404.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:25.202Z,1513261405.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:25.610Z,1513261405.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:26.009Z,1513261406.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:26.407Z,1513261406.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:26.795Z,1513261406.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:27.202Z,1513261407.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:27.601Z,1513261407.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:28.042Z,1513261408.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:28.413Z,1513261408.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:28.816Z,1513261408.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:29.206Z,1513261409.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:29.602Z,1513261409.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:29.996Z,1513261409.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:30.397Z,1513261410.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:30.805Z,1513261410.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:31.254Z,1513261411.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:31.615Z,1513261411.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:32.020Z,1513261412.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:32.498Z,1513261412.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:32.804Z,1513261412.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:33.231Z,1513261413.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:33.659Z,1513261413.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:34.020Z,1513261414.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:34.443Z,1513261414.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:34.797Z,1513261414.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:35.219Z,1513261415.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:35.619Z,1513261415.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:36.015Z,1513261416.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:36.408Z,1513261416.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:36.799Z,1513261416.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:37.206Z,1513261417.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:37.612Z,1513261417.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:38.016Z,1513261418.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:38.388Z,1513261418.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:38.815Z,1513261418.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:39.220Z,1513261419.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:39.618Z,1513261419.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:40.008Z,1513261420.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:40.406Z,1513261420.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:40.818Z,1513261420.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:41.207Z,1513261421.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:41.607Z,1513261421.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:42.007Z,1513261422.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:42.403Z,1513261422.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:42.834Z,1513261422.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:43.259Z,1513261423.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:43.607Z,1513261423.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:44.043Z,1513261424.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:44.417Z,1513261424.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:44.809Z,1513261424.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:45.213Z,1513261425.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:45.611Z,1513261425.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:46.015Z,1513261426.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:46.408Z,1513261426.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:46.811Z,1513261426.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:47.218Z,1513261427.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:47.600Z,1513261427.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:48.008Z,1513261428.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:48.394Z,1513261428.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:48.801Z,1513261428.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:49.197Z,1513261429.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:49.626Z,1513261429.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:50.008Z,1513261430.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:50.436Z,1513261430.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:50.797Z,1513261430.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:51.203Z,1513261431.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:51.615Z,1513261431.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:52.011Z,1513261432.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:52.410Z,1513261432.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:52.803Z,1513261432.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:53.206Z,1513261433.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:53.695Z,1513261433.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:54.003Z,1513261434.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:54.404Z,1513261434.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:54.828Z,1513261434.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:55.207Z,1513261435.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:55.606Z,1513261435.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:56.023Z,1513261436.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:56.402Z,1513261436.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:56.831Z,1513261436.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:57.211Z,1513261437.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:57.614Z,1513261437.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:58.011Z,1513261438.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:58.410Z,1513261438.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:58.805Z,1513261438.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:58.809Z,1513261438.809 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T14:18:58.8Z
2017-12-14T14:23:58.809Z,1513261438.809 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:23:58.809Z,1513261438.809 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:23:59.211Z,1513261439.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:23:59.980Z,1513261439.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:00.126Z,1513261440.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:03.737Z,1513261443.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:03.820Z,1513261443.820 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171214T002839/Courier0320.lzma
2017-12-14T14:24:03.930Z,1513261443.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:04.241Z,1513261444.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:04.568Z,1513261444.568 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0320.lzma.bak
2017-12-14T14:24:04.568Z,1513261444.568 [DataOverHttps](INFO): SBD MOMSN=5439010
2017-12-14T14:24:04.639Z,1513261444.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:05.771Z,1513261445.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:05.919Z,1513261445.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:09.338Z,1513261449.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:09.472Z,1513261449.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:09.864Z,1513261449.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:10.291Z,1513261450.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:10.703Z,1513261450.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:11.052Z,1513261451.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:14.554Z,1513261454.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:14.629Z,1513261454.629 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0321.lzma
2017-12-14T14:24:14.688Z,1513261454.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:15.081Z,1513261455.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:15.408Z,1513261455.408 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0321.lzma.bak
2017-12-14T14:24:15.408Z,1513261455.408 [DataOverHttps](INFO): SBD MOMSN=5439013
2017-12-14T14:24:15.470Z,1513261455.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:16.798Z,1513261456.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:16.802Z,1513261456.802 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:24:16.802Z,1513261456.802 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:24:16.802Z,1513261456.802 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:24:16.914Z,1513261456.914 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T14:24:16.914Z,1513261456.914 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:24:16.914Z,1513261456.914 [BPC1](ERROR): Data Fault
2017-12-14T14:24:16.951Z,1513261456.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:16.976Z,1513261456.976 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:24:20.467Z,1513261460.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:20.596Z,1513261460.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:20.995Z,1513261460.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:21.008Z,1513261461.008 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:24:21.008Z,1513261461.008 [BPC1] No Fault, FailCount= 1
2017-12-14T14:24:21.432Z,1513261461.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:21.769Z,1513261461.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:22.232Z,1513261462.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:22.585Z,1513261462.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:22.959Z,1513261462.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:23.432Z,1513261463.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:23.768Z,1513261463.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:24.211Z,1513261464.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:24.559Z,1513261464.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:24.955Z,1513261464.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:25.358Z,1513261465.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:25.758Z,1513261465.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:26.291Z,1513261466.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:26.585Z,1513261466.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:26.995Z,1513261466.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:27.386Z,1513261467.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:27.770Z,1513261467.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:28.175Z,1513261468.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:28.596Z,1513261468.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:28.978Z,1513261468.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:29.376Z,1513261469.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:29.819Z,1513261469.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:30.180Z,1513261470.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:30.596Z,1513261470.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:30.968Z,1513261470.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:31.367Z,1513261471.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:31.770Z,1513261471.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:32.251Z,1513261472.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:32.623Z,1513261472.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:32.998Z,1513261472.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:33.374Z,1513261473.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:33.769Z,1513261473.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:34.267Z,1513261474.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:34.575Z,1513261474.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:34.964Z,1513261474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:35.376Z,1513261475.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:35.808Z,1513261475.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:36.231Z,1513261476.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:36.582Z,1513261476.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:36.988Z,1513261476.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:37.364Z,1513261477.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:37.763Z,1513261477.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:38.229Z,1513261478.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:38.595Z,1513261478.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:39.044Z,1513261479.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:39.378Z,1513261479.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:39.765Z,1513261479.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:40.239Z,1513261480.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:40.597Z,1513261480.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:40.983Z,1513261480.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:41.431Z,1513261481.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:41.784Z,1513261481.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:42.215Z,1513261482.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:42.611Z,1513261482.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:42.974Z,1513261482.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:43.432Z,1513261483.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:43.770Z,1513261483.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:44.170Z,1513261484.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:44.585Z,1513261484.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:44.982Z,1513261484.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:45.414Z,1513261485.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:45.770Z,1513261485.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:46.252Z,1513261486.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:46.576Z,1513261486.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:46.968Z,1513261486.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:47.372Z,1513261487.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:47.772Z,1513261487.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:48.221Z,1513261488.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:48.604Z,1513261488.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:49.040Z,1513261489.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:49.371Z,1513261489.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:49.773Z,1513261489.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:50.229Z,1513261490.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:50.584Z,1513261490.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:50.980Z,1513261490.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:51.383Z,1513261491.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:51.843Z,1513261491.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:52.236Z,1513261492.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:52.558Z,1513261492.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:52.959Z,1513261492.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:53.384Z,1513261493.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:53.784Z,1513261493.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:54.228Z,1513261494.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:54.572Z,1513261494.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:55.026Z,1513261495.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:55.368Z,1513261495.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:55.767Z,1513261495.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:56.168Z,1513261496.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:56.579Z,1513261496.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:56.976Z,1513261496.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:57.372Z,1513261497.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:57.771Z,1513261497.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:58.221Z,1513261498.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:58.582Z,1513261498.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:58.969Z,1513261498.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:59.382Z,1513261499.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:24:59.781Z,1513261499.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:00.230Z,1513261500.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:00.572Z,1513261500.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:01.063Z,1513261501.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:01.427Z,1513261501.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:01.764Z,1513261501.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:02.230Z,1513261502.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:02.592Z,1513261502.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:02.983Z,1513261502.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:03.386Z,1513261503.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:03.815Z,1513261503.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:04.220Z,1513261504.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:04.671Z,1513261504.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:04.976Z,1513261504.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:05.407Z,1513261505.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:05.767Z,1513261505.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:06.247Z,1513261506.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:06.577Z,1513261506.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:07.028Z,1513261507.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:07.371Z,1513261507.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:07.799Z,1513261507.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.262Z,1513261508.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.575Z,1513261508.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.975Z,1513261508.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.975Z,1513261508.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 277
2017-12-14T14:25:08.975Z,1513261508.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:25:08.977Z,1513261508.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.977Z,1513261508.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 277
2017-12-14T14:25:08.977Z,1513261508.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:25:08.979Z,1513261508.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:08.979Z,1513261508.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 277
2017-12-14T14:25:08.979Z,1513261508.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:25:09.007Z,1513261509.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:25:09.008Z,1513261509.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:25:09.008Z,1513261509.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:25:09.386Z,1513261509.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:25:09.386Z,1513261509.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 277
2017-12-14T14:25:09.387Z,1513261509.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:25:09.387Z,1513261509.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 277
2017-12-14T14:25:09.387Z,1513261509.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:25:09.387Z,1513261509.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 277
2017-12-14T14:25:09.772Z,1513261509.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:25:09.772Z,1513261509.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:25:09.773Z,1513261509.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:25:09.774Z,1513261509.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:25:09.774Z,1513261509.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:25:09.774Z,1513261509.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:25:09.775Z,1513261509.775 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:25:09.775Z,1513261509.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:25:09.775Z,1513261509.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:25:10.174Z,1513261510.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:10.592Z,1513261510.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:10.995Z,1513261510.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:11.381Z,1513261511.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:11.760Z,1513261511.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:12.160Z,1513261512.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:12.596Z,1513261512.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:12.958Z,1513261512.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:13.384Z,1513261513.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:13.832Z,1513261513.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:14.255Z,1513261514.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:14.572Z,1513261514.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:14.965Z,1513261514.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:15.364Z,1513261515.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:15.762Z,1513261515.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:16.220Z,1513261516.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:16.599Z,1513261516.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:16.979Z,1513261516.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:17.422Z,1513261517.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:20.848Z,1513261520.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:20.960Z,1513261520.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:21.340Z,1513261521.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:21.747Z,1513261521.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:22.147Z,1513261522.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:22.526Z,1513261522.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:22.923Z,1513261522.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:23.327Z,1513261523.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:23.727Z,1513261523.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:24.139Z,1513261524.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:24.582Z,1513261524.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:24.934Z,1513261524.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:25.336Z,1513261525.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:25.778Z,1513261525.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:26.174Z,1513261526.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:26.585Z,1513261526.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:26.954Z,1513261526.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:27.367Z,1513261527.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:27.743Z,1513261527.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:28.223Z,1513261528.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:28.527Z,1513261528.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:28.953Z,1513261528.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:29.318Z,1513261529.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:29.750Z,1513261529.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:30.188Z,1513261530.188 [PNI_TCM](ERROR): CRC does not match. Expected:0x46845 got:0x288
2017-12-14T14:25:30.248Z,1513261530.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:30.546Z,1513261530.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:30.939Z,1513261530.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:31.342Z,1513261531.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:31.719Z,1513261531.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:32.194Z,1513261532.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:32.535Z,1513261532.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:32.928Z,1513261532.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:33.351Z,1513261533.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:33.743Z,1513261533.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:34.203Z,1513261534.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:34.539Z,1513261534.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:34.930Z,1513261534.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:35.327Z,1513261535.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:35.729Z,1513261535.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:36.124Z,1513261536.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:36.587Z,1513261536.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:36.943Z,1513261536.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:37.334Z,1513261537.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:37.734Z,1513261537.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:38.134Z,1513261538.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:38.583Z,1513261538.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:38.920Z,1513261538.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:39.348Z,1513261539.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:39.749Z,1513261539.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:40.128Z,1513261540.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:40.587Z,1513261540.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:40.939Z,1513261540.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:41.332Z,1513261541.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:41.728Z,1513261541.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:42.215Z,1513261542.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:42.550Z,1513261542.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:42.962Z,1513261542.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x21030 got:0x352
2017-12-14T14:25:42.987Z,1513261542.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:43.349Z,1513261543.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:43.724Z,1513261543.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:44.184Z,1513261544.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:44.553Z,1513261544.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:44.945Z,1513261544.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:45.345Z,1513261545.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:45.755Z,1513261545.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:46.224Z,1513261546.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:46.527Z,1513261546.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:46.926Z,1513261546.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:47.328Z,1513261547.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:47.728Z,1513261547.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:48.251Z,1513261548.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:48.567Z,1513261548.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:48.943Z,1513261548.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:49.363Z,1513261549.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:49.731Z,1513261549.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:50.223Z,1513261550.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:50.535Z,1513261550.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:50.928Z,1513261550.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:51.337Z,1513261551.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:51.733Z,1513261551.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:52.133Z,1513261552.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:52.599Z,1513261552.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:52.935Z,1513261552.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:53.312Z,1513261553.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:53.735Z,1513261553.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:54.111Z,1513261554.111 [PNI_TCM](ERROR): CRC does not match. Expected:0x21654 got:0x15876
2017-12-14T14:25:54.140Z,1513261554.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:54.586Z,1513261554.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:54.948Z,1513261554.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:55.351Z,1513261555.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:55.770Z,1513261555.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:56.211Z,1513261556.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:56.524Z,1513261556.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:56.928Z,1513261556.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:57.328Z,1513261557.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:57.730Z,1513261557.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:58.208Z,1513261558.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:58.527Z,1513261558.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:58.995Z,1513261558.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:59.324Z,1513261559.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:25:59.723Z,1513261559.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:00.174Z,1513261560.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:00.522Z,1513261560.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:00.928Z,1513261560.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:01.353Z,1513261561.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:01.745Z,1513261561.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:02.200Z,1513261562.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x8155 got:0x36833
2017-12-14T14:26:02.234Z,1513261562.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:02.533Z,1513261562.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:02.928Z,1513261562.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:03.336Z,1513261563.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:03.742Z,1513261563.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:04.132Z,1513261564.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:04.532Z,1513261564.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:04.975Z,1513261564.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:05.347Z,1513261565.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:05.733Z,1513261565.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:06.135Z,1513261566.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:06.574Z,1513261566.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:06.937Z,1513261566.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:07.355Z,1513261567.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:07.727Z,1513261567.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:08.126Z,1513261568.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:08.602Z,1513261568.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:08.924Z,1513261568.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:09.333Z,1513261569.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:09.744Z,1513261569.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:10.239Z,1513261570.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:10.534Z,1513261570.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:10.933Z,1513261570.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:11.367Z,1513261571.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:11.727Z,1513261571.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:12.230Z,1513261572.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:12.528Z,1513261572.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:12.932Z,1513261572.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:13.346Z,1513261573.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:13.726Z,1513261573.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:14.210Z,1513261574.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:14.529Z,1513261574.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:14.967Z,1513261574.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:15.336Z,1513261575.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:15.748Z,1513261575.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:16.186Z,1513261576.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:16.527Z,1513261576.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:16.945Z,1513261576.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:17.323Z,1513261577.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:17.801Z,1513261577.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:24.485Z,1513261584.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:24.670Z,1513261584.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:25.063Z,1513261585.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:25.455Z,1513261585.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:25.855Z,1513261585.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:26.284Z,1513261586.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:26.639Z,1513261586.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:27.031Z,1513261587.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:27.479Z,1513261587.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:27.871Z,1513261587.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:28.231Z,1513261588.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:28.638Z,1513261588.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:29.025Z,1513261589.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:29.425Z,1513261589.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:29.843Z,1513261589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:30.251Z,1513261590.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:30.661Z,1513261590.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:31.098Z,1513261591.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:31.470Z,1513261591.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:31.832Z,1513261591.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:32.320Z,1513261592.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:32.646Z,1513261592.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:33.053Z,1513261593.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:33.456Z,1513261593.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:33.893Z,1513261593.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:34.267Z,1513261594.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:34.655Z,1513261594.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:35.066Z,1513261595.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:35.443Z,1513261595.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:35.903Z,1513261595.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:36.296Z,1513261596.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:36.691Z,1513261596.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:37.044Z,1513261597.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:37.483Z,1513261597.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:37.837Z,1513261597.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:38.310Z,1513261598.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:38.700Z,1513261598.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:39.050Z,1513261599.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:39.450Z,1513261599.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:39.847Z,1513261599.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:40.264Z,1513261600.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:40.667Z,1513261600.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:41.054Z,1513261601.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:41.436Z,1513261601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:41.835Z,1513261601.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:42.252Z,1513261602.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:42.654Z,1513261602.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:43.044Z,1513261603.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:43.460Z,1513261603.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:43.856Z,1513261603.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:44.277Z,1513261604.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:44.700Z,1513261604.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:45.035Z,1513261605.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:45.439Z,1513261605.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:45.864Z,1513261605.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:46.292Z,1513261606.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:46.675Z,1513261606.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:47.082Z,1513261607.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:47.432Z,1513261607.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:47.891Z,1513261607.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:48.255Z,1513261608.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:48.683Z,1513261608.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:49.048Z,1513261609.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:49.514Z,1513261609.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:49.820Z,1513261609.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:50.239Z,1513261610.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:50.651Z,1513261610.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:51.051Z,1513261611.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:51.424Z,1513261611.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:51.820Z,1513261611.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:52.259Z,1513261612.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:52.643Z,1513261612.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:53.093Z,1513261613.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:53.420Z,1513261613.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:53.826Z,1513261613.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:54.264Z,1513261614.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:54.652Z,1513261614.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:55.031Z,1513261615.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:55.425Z,1513261615.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:55.825Z,1513261615.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:56.249Z,1513261616.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:56.666Z,1513261616.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:57.025Z,1513261617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:57.514Z,1513261617.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:57.825Z,1513261617.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:58.271Z,1513261618.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:58.643Z,1513261618.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:59.064Z,1513261619.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:59.436Z,1513261619.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:26:59.818Z,1513261619.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:00.311Z,1513261620.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:00.656Z,1513261620.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:01.095Z,1513261621.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:01.421Z,1513261621.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:01.823Z,1513261621.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:02.231Z,1513261622.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:02.623Z,1513261622.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:03.026Z,1513261623.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:03.443Z,1513261623.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:03.896Z,1513261623.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:04.236Z,1513261624.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:04.634Z,1513261624.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:05.028Z,1513261625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:05.427Z,1513261625.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:05.826Z,1513261625.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:06.238Z,1513261626.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:06.636Z,1513261626.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:07.071Z,1513261627.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:07.435Z,1513261627.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:07.831Z,1513261627.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:08.240Z,1513261628.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:08.643Z,1513261628.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:09.036Z,1513261629.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:09.459Z,1513261629.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:09.823Z,1513261629.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:10.255Z,1513261630.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:10.643Z,1513261630.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:11.043Z,1513261631.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:11.439Z,1513261631.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:11.839Z,1513261631.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:12.240Z,1513261632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:12.640Z,1513261632.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:13.040Z,1513261633.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:13.464Z,1513261633.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:13.820Z,1513261633.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:14.220Z,1513261634.220 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:27:14.220Z,1513261634.220 [NAL9602] Data Fault, FailCount= 1
2017-12-14T14:27:14.220Z,1513261634.220 [NAL9602](ERROR): Data Fault
2017-12-14T14:27:14.292Z,1513261634.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:14.314Z,1513261634.314 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:27:14.582Z,1513261634.582 [NAL9602](INFO): Powering down
2017-12-14T14:27:14.639Z,1513261634.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:15.037Z,1513261635.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:15.416Z,1513261635.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:15.454Z,1513261635.454 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:27:15.454Z,1513261635.454 [NAL9602] No Fault, FailCount= 1
2017-12-14T14:27:15.842Z,1513261635.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:16.238Z,1513261636.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:16.660Z,1513261636.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:17.031Z,1513261637.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:17.434Z,1513261637.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:17.838Z,1513261637.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:21.319Z,1513261641.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:21.454Z,1513261641.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:21.863Z,1513261641.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:22.244Z,1513261642.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:22.630Z,1513261642.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:23.121Z,1513261643.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:23.428Z,1513261643.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:23.834Z,1513261643.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:24.236Z,1513261644.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:24.620Z,1513261644.620 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:27:24.620Z,1513261644.620 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:27:24.620Z,1513261644.620 [BPC1](ERROR): Communications Fault
2017-12-14T14:27:24.628Z,1513261644.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:24.642Z,1513261644.642 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:27:25.033Z,1513261645.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:25.434Z,1513261645.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:25.834Z,1513261645.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:25.847Z,1513261645.847 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:27:25.847Z,1513261645.847 [BPC1] No Fault, FailCount= 1
2017-12-14T14:27:26.377Z,1513261646.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:26.633Z,1513261646.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:27.033Z,1513261647.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:27.434Z,1513261647.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:27.833Z,1513261647.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:28.277Z,1513261648.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:28.622Z,1513261648.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:29.031Z,1513261649.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:29.467Z,1513261649.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:29.831Z,1513261649.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:30.225Z,1513261650.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:30.631Z,1513261650.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:31.029Z,1513261651.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:31.426Z,1513261651.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:31.828Z,1513261651.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:32.227Z,1513261652.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:32.659Z,1513261652.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:33.045Z,1513261653.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:33.415Z,1513261653.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:33.817Z,1513261653.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:34.240Z,1513261654.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:34.659Z,1513261654.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:35.042Z,1513261655.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:35.415Z,1513261655.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:35.862Z,1513261655.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:36.249Z,1513261656.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:36.624Z,1513261656.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:37.024Z,1513261657.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:37.423Z,1513261657.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:37.815Z,1513261657.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:38.219Z,1513261658.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:38.630Z,1513261658.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:39.068Z,1513261659.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:39.439Z,1513261659.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:39.826Z,1513261659.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:40.238Z,1513261660.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:40.624Z,1513261660.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:41.028Z,1513261661.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:41.426Z,1513261661.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:41.827Z,1513261661.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:42.299Z,1513261662.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:42.631Z,1513261662.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:43.027Z,1513261663.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:43.423Z,1513261663.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:43.825Z,1513261663.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:44.225Z,1513261664.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:44.612Z,1513261664.612 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:27:44.645Z,1513261664.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:45.032Z,1513261665.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:45.475Z,1513261665.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:45.839Z,1513261665.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:46.214Z,1513261666.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:46.619Z,1513261666.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:47.051Z,1513261667.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:47.449Z,1513261667.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:47.847Z,1513261667.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:48.245Z,1513261668.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:48.690Z,1513261668.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:49.019Z,1513261669.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:49.414Z,1513261669.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:49.816Z,1513261669.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:50.247Z,1513261670.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:50.645Z,1513261670.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:51.018Z,1513261671.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:51.446Z,1513261671.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:51.859Z,1513261671.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:52.240Z,1513261672.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:52.622Z,1513261672.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:53.027Z,1513261673.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:53.427Z,1513261673.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:53.826Z,1513261673.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:54.237Z,1513261674.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:54.625Z,1513261674.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:55.063Z,1513261675.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:55.441Z,1513261675.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:55.780Z,1513261675.780 [NAL9602](INFO): NAL9602 initialized
2017-12-14T14:27:55.829Z,1513261675.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:56.311Z,1513261676.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:56.643Z,1513261676.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:57.043Z,1513261677.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:57.491Z,1513261677.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:57.828Z,1513261677.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:58.268Z,1513261678.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:58.626Z,1513261678.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:59.040Z,1513261679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:59.442Z,1513261679.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:27:59.836Z,1513261679.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:00.230Z,1513261680.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:00.626Z,1513261680.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:01.025Z,1513261681.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:01.471Z,1513261681.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:01.823Z,1513261681.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:02.235Z,1513261682.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:02.645Z,1513261682.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:03.045Z,1513261683.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:03.433Z,1513261683.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:03.835Z,1513261683.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:04.236Z,1513261684.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:04.690Z,1513261684.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:05.043Z,1513261685.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:05.449Z,1513261685.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:05.839Z,1513261685.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:06.249Z,1513261686.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:06.638Z,1513261686.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:07.014Z,1513261687.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:07.460Z,1513261687.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:07.887Z,1513261687.887 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T14:28:07.887Z,1513261687.887 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:28:07.887Z,1513261687.887 [BPC1](ERROR): Data Fault
2017-12-14T14:28:07.904Z,1513261687.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:07.954Z,1513261687.954 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:28:08.249Z,1513261688.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:08.651Z,1513261688.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.044Z,1513261689.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.067Z,1513261689.067 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:28:09.067Z,1513261689.067 [BPC1] No Fault, FailCount= 1
2017-12-14T14:28:09.491Z,1513261689.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.702Z,1513261689.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:09.825Z,1513261689.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.825Z,1513261689.825 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 278
2017-12-14T14:28:09.825Z,1513261689.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:28:09.827Z,1513261689.827 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.827Z,1513261689.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 278
2017-12-14T14:28:09.827Z,1513261689.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:28:09.829Z,1513261689.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:09.829Z,1513261689.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 278
2017-12-14T14:28:09.829Z,1513261689.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:28:09.878Z,1513261689.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:28:09.878Z,1513261689.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:28:09.879Z,1513261689.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:28:10.303Z,1513261690.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:28:10.303Z,1513261690.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 278
2017-12-14T14:28:10.304Z,1513261690.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:28:10.304Z,1513261690.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 278
2017-12-14T14:28:10.304Z,1513261690.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:28:10.304Z,1513261690.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 278
2017-12-14T14:28:10.499Z,1513261690.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:10.633Z,1513261690.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:28:10.633Z,1513261690.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:28:10.633Z,1513261690.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:28:10.634Z,1513261690.634 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:28:10.634Z,1513261690.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:28:10.635Z,1513261690.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:28:10.635Z,1513261690.635 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:28:10.635Z,1513261690.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:28:10.636Z,1513261690.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:28:10.905Z,1513261690.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:11.081Z,1513261691.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:11.436Z,1513261691.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:11.702Z,1513261691.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:11.843Z,1513261691.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:12.242Z,1513261692.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:12.499Z,1513261692.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:12.635Z,1513261692.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:12.906Z,1513261692.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:13.027Z,1513261693.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:13.415Z,1513261693.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:13.701Z,1513261693.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:13.815Z,1513261693.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:14.271Z,1513261694.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:14.499Z,1513261694.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:14.646Z,1513261694.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:14.909Z,1513261694.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:15.028Z,1513261695.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:15.419Z,1513261695.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:15.821Z,1513261695.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:16.256Z,1513261696.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:16.631Z,1513261696.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:17.028Z,1513261697.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:17.460Z,1513261697.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:17.859Z,1513261697.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:18.254Z,1513261698.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:21.623Z,1513261701.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:21.771Z,1513261701.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:22.195Z,1513261702.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:22.551Z,1513261702.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:22.947Z,1513261702.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:23.329Z,1513261703.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:23.724Z,1513261703.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:24.135Z,1513261704.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:24.546Z,1513261704.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:24.943Z,1513261704.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:25.344Z,1513261705.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:25.690Z,1513261705.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:25.748Z,1513261705.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:26.131Z,1513261706.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:26.488Z,1513261706.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:26.593Z,1513261706.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:26.926Z,1513261706.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:28:26.979Z,1513261706.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:27.329Z,1513261707.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:27.729Z,1513261707.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:28.136Z,1513261708.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:28.611Z,1513261708.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:28.932Z,1513261708.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:29.333Z,1513261709.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:29.775Z,1513261709.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:30.208Z,1513261710.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:30.590Z,1513261710.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:30.943Z,1513261710.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:31.363Z,1513261711.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:31.744Z,1513261711.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:32.220Z,1513261712.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:32.530Z,1513261712.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:32.931Z,1513261712.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:33.323Z,1513261713.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:33.727Z,1513261713.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:34.226Z,1513261714.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:34.539Z,1513261714.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:34.936Z,1513261714.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:35.329Z,1513261715.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:35.728Z,1513261715.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:36.193Z,1513261716.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:36.570Z,1513261716.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:36.933Z,1513261716.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:37.338Z,1513261717.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:37.746Z,1513261717.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:38.127Z,1513261718.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:38.543Z,1513261718.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:38.944Z,1513261718.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:39.337Z,1513261719.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:39.799Z,1513261719.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:40.139Z,1513261720.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:40.588Z,1513261720.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:40.941Z,1513261720.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:41.319Z,1513261721.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:41.724Z,1513261721.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:42.137Z,1513261722.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:42.594Z,1513261722.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:42.979Z,1513261722.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:43.335Z,1513261723.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:43.736Z,1513261723.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:44.210Z,1513261724.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:44.523Z,1513261724.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:44.930Z,1513261724.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:45.331Z,1513261725.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:45.730Z,1513261725.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:46.228Z,1513261726.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:46.527Z,1513261726.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:46.929Z,1513261726.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:47.339Z,1513261727.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:47.727Z,1513261727.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:48.195Z,1513261728.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:48.560Z,1513261728.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:48.940Z,1513261728.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:49.340Z,1513261729.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:49.727Z,1513261729.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:50.198Z,1513261730.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:50.556Z,1513261730.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:50.954Z,1513261730.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:51.332Z,1513261731.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:51.778Z,1513261731.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:52.129Z,1513261732.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:52.559Z,1513261732.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:52.986Z,1513261732.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:53.345Z,1513261733.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:53.763Z,1513261733.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:54.123Z,1513261734.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:54.593Z,1513261734.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:54.947Z,1513261734.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:55.344Z,1513261735.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:55.767Z,1513261735.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:56.128Z,1513261736.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:56.571Z,1513261736.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:56.935Z,1513261736.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:57.335Z,1513261737.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:57.742Z,1513261737.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:58.207Z,1513261738.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:58.524Z,1513261738.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:59.001Z,1513261739.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:59.324Z,1513261739.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:28:59.731Z,1513261739.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:00.203Z,1513261740.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:00.529Z,1513261740.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:00.956Z,1513261740.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:01.334Z,1513261741.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:01.733Z,1513261741.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:02.231Z,1513261742.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:02.545Z,1513261742.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:02.931Z,1513261742.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:03.328Z,1513261743.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:03.731Z,1513261743.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:04.216Z,1513261744.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:04.550Z,1513261744.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:04.930Z,1513261744.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:05.324Z,1513261745.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:05.726Z,1513261745.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:06.132Z,1513261746.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:06.533Z,1513261746.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:06.940Z,1513261746.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:07.346Z,1513261747.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:07.738Z,1513261747.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:08.135Z,1513261748.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:08.603Z,1513261748.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:08.947Z,1513261748.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:09.342Z,1513261749.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:09.741Z,1513261749.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:10.135Z,1513261750.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:10.587Z,1513261750.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:10.941Z,1513261750.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:11.333Z,1513261751.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:11.726Z,1513261751.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:12.196Z,1513261752.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:12.547Z,1513261752.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:12.963Z,1513261752.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:13.327Z,1513261753.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:13.745Z,1513261753.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:14.192Z,1513261754.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:14.562Z,1513261754.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:15.015Z,1513261755.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:15.371Z,1513261755.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:15.743Z,1513261755.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:16.204Z,1513261756.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:16.537Z,1513261756.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:16.943Z,1513261756.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:17.339Z,1513261757.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:17.343Z,1513261757.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T14:29:17.343Z,1513261757.343 [Default:CheckIn:C.Wait] Stopped
2017-12-14T14:29:17.343Z,1513261757.343 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T14:29:17.343Z,1513261757.343 [Default:CheckIn:D] Running Loop=1
2017-12-14T14:29:17.751Z,1513261757.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:17.755Z,1513261757.755 [Default:CheckIn:D] Stopped
2017-12-14T14:29:17.755Z,1513261757.755 [Default:CheckIn:E] Running Loop=1
2017-12-14T14:29:18.207Z,1513261758.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:18.223Z,1513261758.223 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 836.039388 min 
2017-12-14T14:29:18.223Z,1513261758.223 [Default:CheckIn:E] Stopped
2017-12-14T14:29:18.223Z,1513261758.223 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn] Stopped
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn](INFO): Running loop #81
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn] Running Loop=81
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T14:29:18.224Z,1513261758.224 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T14:29:18.542Z,1513261758.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:21.927Z,1513261761.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:21.941Z,1513261761.941 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:29:22.051Z,1513261762.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:22.424Z,1513261762.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:22.833Z,1513261762.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:23.205Z,1513261763.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:23.600Z,1513261763.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:23.999Z,1513261763.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:24.431Z,1513261764.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:24.808Z,1513261764.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:25.213Z,1513261765.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:25.623Z,1513261765.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:26.019Z,1513261766.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:26.411Z,1513261766.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:26.802Z,1513261766.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:27.209Z,1513261767.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:27.601Z,1513261767.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:28.010Z,1513261768.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:28.414Z,1513261768.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:28.814Z,1513261768.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:29.204Z,1513261769.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:29.608Z,1513261769.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:30.009Z,1513261770.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:30.402Z,1513261770.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:30.847Z,1513261770.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:31.227Z,1513261771.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:31.618Z,1513261771.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:32.023Z,1513261772.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:32.408Z,1513261772.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:32.808Z,1513261772.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:33.211Z,1513261773.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:33.612Z,1513261773.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:34.054Z,1513261774.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:34.431Z,1513261774.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:34.839Z,1513261774.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:35.207Z,1513261775.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:35.614Z,1513261775.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:36.013Z,1513261776.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:36.388Z,1513261776.388 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T14:29:36.388Z,1513261776.388 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:29:36.388Z,1513261776.388 [BPC1](ERROR): Data Fault
2017-12-14T14:29:36.416Z,1513261776.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:36.468Z,1513261776.468 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:29:36.811Z,1513261776.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:37.213Z,1513261777.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:37.614Z,1513261777.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:37.627Z,1513261777.627 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:29:37.627Z,1513261777.627 [BPC1] No Fault, FailCount= 1
2017-12-14T14:29:37.703Z,1513261777.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:38.060Z,1513261778.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:38.413Z,1513261778.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:38.499Z,1513261778.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:38.807Z,1513261778.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:38.905Z,1513261778.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:39.204Z,1513261779.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:39.604Z,1513261779.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:39.702Z,1513261779.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:40.013Z,1513261780.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:40.494Z,1513261780.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:40.497Z,1513261780.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:40.827Z,1513261780.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:40.902Z,1513261780.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:41.200Z,1513261781.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:41.599Z,1513261781.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:42.003Z,1513261782.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:42.411Z,1513261782.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:42.805Z,1513261782.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:43.220Z,1513261783.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:43.652Z,1513261783.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:44.027Z,1513261784.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:44.398Z,1513261784.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:44.802Z,1513261784.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:45.197Z,1513261785.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:45.602Z,1513261785.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:46.008Z,1513261786.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:46.444Z,1513261786.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:46.810Z,1513261786.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:47.207Z,1513261787.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:47.603Z,1513261787.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:48.007Z,1513261788.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:48.402Z,1513261788.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:48.804Z,1513261788.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:49.204Z,1513261789.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:49.608Z,1513261789.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:50.004Z,1513261790.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:50.513Z,1513261790.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:50.803Z,1513261790.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:51.202Z,1513261791.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:51.602Z,1513261791.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:51.722Z,1513261791.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:52.050Z,1513261792.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:52.407Z,1513261792.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:52.517Z,1513261792.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:52.827Z,1513261792.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:52.921Z,1513261792.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:29:53.205Z,1513261793.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:53.607Z,1513261793.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:54.019Z,1513261794.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:54.411Z,1513261794.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:54.817Z,1513261794.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:55.227Z,1513261795.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:55.623Z,1513261795.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:56.018Z,1513261796.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:56.407Z,1513261796.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:56.831Z,1513261796.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:57.210Z,1513261797.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:57.605Z,1513261797.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:58.006Z,1513261798.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:58.448Z,1513261798.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:58.810Z,1513261798.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:59.203Z,1513261799.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:29:59.627Z,1513261799.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:00.031Z,1513261800.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:00.427Z,1513261800.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:00.806Z,1513261800.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:01.215Z,1513261801.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:01.612Z,1513261801.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:02.009Z,1513261802.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:02.413Z,1513261802.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:02.807Z,1513261802.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:03.207Z,1513261803.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:03.614Z,1513261803.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:04.018Z,1513261804.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:04.416Z,1513261804.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:04.827Z,1513261804.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:05.222Z,1513261805.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:05.622Z,1513261805.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:05.705Z,1513261805.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:05.996Z,1513261805.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:06.438Z,1513261806.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:06.503Z,1513261806.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:06.815Z,1513261806.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:06.953Z,1513261806.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:07.224Z,1513261807.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:07.624Z,1513261807.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:07.750Z,1513261807.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:08.014Z,1513261808.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:08.391Z,1513261808.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:08.548Z,1513261808.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:08.831Z,1513261808.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:09.194Z,1513261809.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:09.593Z,1513261809.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:10.023Z,1513261810.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:10.424Z,1513261810.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:10.816Z,1513261810.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:11.197Z,1513261811.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:11.597Z,1513261811.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:11.991Z,1513261811.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:12.417Z,1513261812.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:12.798Z,1513261812.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:13.206Z,1513261813.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:13.604Z,1513261813.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:14.004Z,1513261814.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:14.407Z,1513261814.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:14.800Z,1513261814.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:15.203Z,1513261815.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:15.602Z,1513261815.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:16.047Z,1513261816.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:16.439Z,1513261816.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:16.815Z,1513261816.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:17.200Z,1513261817.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:17.414Z,1513261817.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:17.607Z,1513261817.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:18.011Z,1513261818.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:18.209Z,1513261818.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:30:18.402Z,1513261818.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:18.815Z,1513261818.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:22.372Z,1513261822.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:22.528Z,1513261822.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:22.883Z,1513261822.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:23.295Z,1513261823.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:23.664Z,1513261823.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:24.079Z,1513261824.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:24.462Z,1513261824.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:24.892Z,1513261824.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:25.284Z,1513261825.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:25.733Z,1513261825.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:26.055Z,1513261826.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:26.467Z,1513261826.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:26.863Z,1513261826.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:27.270Z,1513261827.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:27.673Z,1513261827.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:28.074Z,1513261828.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:28.455Z,1513261828.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:28.892Z,1513261828.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:29.260Z,1513261829.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:29.656Z,1513261829.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:30.067Z,1513261830.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:30.471Z,1513261830.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:30.865Z,1513261830.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:31.259Z,1513261831.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:31.659Z,1513261831.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:32.141Z,1513261832.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:32.538Z,1513261832.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:32.902Z,1513261832.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:33.279Z,1513261833.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:33.671Z,1513261833.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:34.061Z,1513261834.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:34.512Z,1513261834.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:34.883Z,1513261834.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:35.343Z,1513261835.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:35.665Z,1513261835.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:36.067Z,1513261836.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:36.467Z,1513261836.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:36.864Z,1513261836.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:37.261Z,1513261837.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:37.663Z,1513261837.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:38.080Z,1513261838.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:38.535Z,1513261838.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:38.871Z,1513261838.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:39.278Z,1513261839.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:39.682Z,1513261839.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:40.081Z,1513261840.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:40.512Z,1513261840.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:40.892Z,1513261840.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:41.291Z,1513261841.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:41.735Z,1513261841.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:42.063Z,1513261842.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:42.474Z,1513261842.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:42.866Z,1513261842.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:43.272Z,1513261843.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:43.712Z,1513261843.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:44.123Z,1513261844.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:44.467Z,1513261844.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:44.898Z,1513261844.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:45.312Z,1513261845.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:45.662Z,1513261845.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:46.115Z,1513261846.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:46.546Z,1513261846.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:46.884Z,1513261846.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:47.262Z,1513261847.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:47.659Z,1513261847.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:48.120Z,1513261848.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:48.545Z,1513261848.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:48.906Z,1513261848.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:49.273Z,1513261849.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:49.679Z,1513261849.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:50.064Z,1513261850.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:50.471Z,1513261850.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:50.882Z,1513261850.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:51.340Z,1513261851.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:51.692Z,1513261851.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:52.071Z,1513261852.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:52.496Z,1513261852.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:52.895Z,1513261852.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:53.281Z,1513261853.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:53.679Z,1513261853.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:54.056Z,1513261854.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:54.527Z,1513261854.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:54.887Z,1513261854.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:55.289Z,1513261855.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:55.694Z,1513261855.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:56.061Z,1513261856.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:56.471Z,1513261856.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:56.894Z,1513261856.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:57.287Z,1513261857.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:57.729Z,1513261857.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:58.060Z,1513261858.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:58.459Z,1513261858.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:58.867Z,1513261858.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:59.279Z,1513261859.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:30:59.685Z,1513261859.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:00.067Z,1513261860.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:00.538Z,1513261860.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:00.887Z,1513261860.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:01.271Z,1513261861.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:01.671Z,1513261861.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:02.086Z,1513261862.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:02.549Z,1513261862.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:02.892Z,1513261862.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:03.263Z,1513261863.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:03.664Z,1513261863.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:04.203Z,1513261864.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:04.475Z,1513261864.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:04.869Z,1513261864.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:05.285Z,1513261865.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:05.680Z,1513261865.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:06.122Z,1513261866.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:06.491Z,1513261866.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:06.865Z,1513261866.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:07.264Z,1513261867.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:07.683Z,1513261867.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:08.174Z,1513261868.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:08.465Z,1513261868.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:08.887Z,1513261868.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:09.266Z,1513261869.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:09.665Z,1513261869.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.085Z,1513261870.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.477Z,1513261870.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.880Z,1513261870.880 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.880Z,1513261870.880 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 279
2017-12-14T14:31:10.880Z,1513261870.880 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:31:10.882Z,1513261870.882 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.882Z,1513261870.882 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 279
2017-12-14T14:31:10.882Z,1513261870.882 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:31:10.884Z,1513261870.884 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:10.884Z,1513261870.884 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 279
2017-12-14T14:31:10.884Z,1513261870.884 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:31:10.904Z,1513261870.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:31:10.904Z,1513261870.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:31:10.904Z,1513261870.904 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:31:11.322Z,1513261871.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:31:11.322Z,1513261871.322 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 279
2017-12-14T14:31:11.322Z,1513261871.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:31:11.322Z,1513261871.322 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 279
2017-12-14T14:31:11.323Z,1513261871.323 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:31:11.323Z,1513261871.323 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 279
2017-12-14T14:31:11.654Z,1513261871.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:31:11.654Z,1513261871.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:31:11.654Z,1513261871.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:31:11.655Z,1513261871.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:31:11.655Z,1513261871.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:31:11.655Z,1513261871.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:31:11.656Z,1513261871.656 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:31:11.656Z,1513261871.656 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:31:11.657Z,1513261871.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:31:12.074Z,1513261872.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:12.460Z,1513261872.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:12.860Z,1513261872.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:13.282Z,1513261873.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:13.725Z,1513261873.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:14.075Z,1513261874.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:14.567Z,1513261874.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:14.906Z,1513261874.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:15.264Z,1513261875.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:15.704Z,1513261875.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:16.132Z,1513261876.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:16.527Z,1513261876.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:16.959Z,1513261876.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:17.304Z,1513261877.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:17.670Z,1513261877.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:18.196Z,1513261878.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:18.488Z,1513261878.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:18.883Z,1513261878.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:23.892Z,1513261883.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:24.035Z,1513261884.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:24.401Z,1513261884.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:24.801Z,1513261884.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:25.232Z,1513261885.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:25.630Z,1513261885.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:25.992Z,1513261885.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:26.396Z,1513261886.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:26.780Z,1513261886.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:27.188Z,1513261887.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:27.600Z,1513261887.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:28.014Z,1513261888.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:28.395Z,1513261888.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:28.852Z,1513261888.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:29.280Z,1513261889.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:29.613Z,1513261889.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:29.991Z,1513261889.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:30.535Z,1513261890.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:30.792Z,1513261890.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:31.207Z,1513261891.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:31.593Z,1513261891.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:31.998Z,1513261891.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:32.375Z,1513261892.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:32.780Z,1513261892.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:33.190Z,1513261893.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:33.583Z,1513261893.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:33.994Z,1513261893.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:34.402Z,1513261894.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:34.771Z,1513261894.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:35.207Z,1513261895.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:35.609Z,1513261895.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:35.985Z,1513261895.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:36.391Z,1513261896.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:36.811Z,1513261896.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:37.175Z,1513261897.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:37.594Z,1513261897.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:37.991Z,1513261897.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:38.386Z,1513261898.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:38.794Z,1513261898.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:39.194Z,1513261899.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:39.603Z,1513261899.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:39.993Z,1513261899.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:40.402Z,1513261900.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:40.789Z,1513261900.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:41.207Z,1513261901.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:41.610Z,1513261901.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:41.971Z,1513261901.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:42.394Z,1513261902.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:42.771Z,1513261902.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:43.172Z,1513261903.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:43.581Z,1513261903.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:43.981Z,1513261903.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:44.386Z,1513261904.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:44.775Z,1513261904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:45.223Z,1513261905.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:45.575Z,1513261905.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:45.982Z,1513261905.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:46.383Z,1513261906.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:46.784Z,1513261906.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:47.191Z,1513261907.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:47.586Z,1513261907.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:47.979Z,1513261907.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:48.366Z,1513261908.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:48.765Z,1513261908.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:49.162Z,1513261909.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:49.568Z,1513261909.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:50.000Z,1513261910.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:50.475Z,1513261910.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:50.784Z,1513261910.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:51.196Z,1513261911.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:51.565Z,1513261911.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:51.963Z,1513261911.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:52.398Z,1513261912.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:52.771Z,1513261912.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:53.223Z,1513261913.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:53.572Z,1513261913.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:53.970Z,1513261913.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:54.420Z,1513261914.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:54.784Z,1513261914.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:55.159Z,1513261915.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:55.563Z,1513261915.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:55.988Z,1513261915.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:56.390Z,1513261916.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:56.765Z,1513261916.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:57.163Z,1513261917.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:57.590Z,1513261917.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:57.969Z,1513261917.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:58.373Z,1513261918.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:58.777Z,1513261918.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:59.178Z,1513261919.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:59.584Z,1513261919.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:31:59.979Z,1513261919.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:00.371Z,1513261920.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:00.793Z,1513261920.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:01.165Z,1513261921.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:01.602Z,1513261921.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:01.984Z,1513261921.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:02.383Z,1513261922.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:02.780Z,1513261922.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:03.157Z,1513261923.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:03.582Z,1513261923.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:04.035Z,1513261924.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:04.364Z,1513261924.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:04.766Z,1513261924.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:05.192Z,1513261925.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:05.586Z,1513261925.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:05.967Z,1513261925.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:06.367Z,1513261926.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:06.801Z,1513261926.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:07.168Z,1513261927.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:07.566Z,1513261927.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:07.979Z,1513261927.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:08.372Z,1513261928.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:08.774Z,1513261928.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:09.164Z,1513261929.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:09.649Z,1513261929.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:09.964Z,1513261929.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:10.407Z,1513261930.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:10.793Z,1513261930.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:11.179Z,1513261931.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:11.607Z,1513261931.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:11.982Z,1513261931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:12.362Z,1513261932.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:12.795Z,1513261932.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:13.202Z,1513261933.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:13.574Z,1513261933.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:13.971Z,1513261933.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:14.406Z,1513261934.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:14.772Z,1513261934.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:15.199Z,1513261935.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:15.563Z,1513261935.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:15.967Z,1513261935.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:16.371Z,1513261936.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:16.798Z,1513261936.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:17.180Z,1513261937.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:17.583Z,1513261937.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:17.978Z,1513261937.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:18.372Z,1513261938.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:18.775Z,1513261938.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:19.171Z,1513261939.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:22.671Z,1513261942.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:22.815Z,1513261942.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:23.167Z,1513261943.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:23.584Z,1513261943.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:23.943Z,1513261943.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:24.345Z,1513261944.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:24.748Z,1513261944.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:25.150Z,1513261945.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:25.570Z,1513261945.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:25.951Z,1513261945.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:26.341Z,1513261946.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:26.743Z,1513261946.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:27.145Z,1513261947.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:27.540Z,1513261947.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:27.946Z,1513261947.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:28.347Z,1513261948.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:28.770Z,1513261948.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:29.149Z,1513261949.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:29.543Z,1513261949.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:29.943Z,1513261949.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:30.347Z,1513261950.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:30.750Z,1513261950.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:31.170Z,1513261951.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:31.569Z,1513261951.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:31.948Z,1513261951.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:32.352Z,1513261952.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:32.742Z,1513261952.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:33.147Z,1513261953.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:33.547Z,1513261953.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:33.949Z,1513261953.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:34.398Z,1513261954.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:34.750Z,1513261954.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:35.177Z,1513261955.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:35.550Z,1513261955.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:36.047Z,1513261956.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:36.362Z,1513261956.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:36.740Z,1513261956.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:37.202Z,1513261957.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:37.565Z,1513261957.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:37.992Z,1513261957.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:38.338Z,1513261958.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:38.763Z,1513261958.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:39.144Z,1513261959.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:39.543Z,1513261959.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:39.962Z,1513261959.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:40.369Z,1513261960.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:40.774Z,1513261960.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:41.142Z,1513261961.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:41.543Z,1513261961.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:41.944Z,1513261961.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:42.390Z,1513261962.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:42.799Z,1513261962.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:43.149Z,1513261963.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:43.553Z,1513261963.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:43.948Z,1513261963.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:44.352Z,1513261964.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:44.745Z,1513261964.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:45.147Z,1513261965.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:45.546Z,1513261965.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:45.953Z,1513261965.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:46.397Z,1513261966.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:46.749Z,1513261966.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:47.150Z,1513261967.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:47.544Z,1513261967.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:47.951Z,1513261967.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:48.443Z,1513261968.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:48.748Z,1513261968.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:49.151Z,1513261969.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:49.552Z,1513261969.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:49.953Z,1513261969.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:50.348Z,1513261970.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:50.741Z,1513261970.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:51.150Z,1513261971.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:51.543Z,1513261971.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:52.002Z,1513261972.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:52.359Z,1513261972.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:52.752Z,1513261972.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:53.147Z,1513261973.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:53.548Z,1513261973.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:53.943Z,1513261973.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:54.350Z,1513261974.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:54.751Z,1513261974.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:55.153Z,1513261975.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:55.551Z,1513261975.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:55.959Z,1513261975.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:56.348Z,1513261976.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:56.790Z,1513261976.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:57.151Z,1513261977.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:57.548Z,1513261977.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:57.952Z,1513261977.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:58.496Z,1513261978.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:58.761Z,1513261978.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:59.171Z,1513261979.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:59.552Z,1513261979.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:32:59.993Z,1513261979.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:00.356Z,1513261980.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:00.744Z,1513261980.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:01.160Z,1513261981.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:01.561Z,1513261981.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:01.975Z,1513261981.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:02.342Z,1513261982.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:02.768Z,1513261982.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:03.146Z,1513261983.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:03.544Z,1513261983.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:03.949Z,1513261983.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:04.349Z,1513261984.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:04.779Z,1513261984.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:05.148Z,1513261985.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:05.551Z,1513261985.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:05.943Z,1513261985.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:06.346Z,1513261986.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:06.746Z,1513261986.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:07.151Z,1513261987.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:07.553Z,1513261987.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:08.070Z,1513261988.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:08.348Z,1513261988.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:08.775Z,1513261988.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:09.150Z,1513261989.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:09.547Z,1513261989.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:09.948Z,1513261989.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:10.351Z,1513261990.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:10.777Z,1513261990.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:11.146Z,1513261991.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:11.551Z,1513261991.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:11.949Z,1513261991.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:12.351Z,1513261992.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:12.752Z,1513261992.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:13.160Z,1513261993.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:13.562Z,1513261993.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:13.964Z,1513261993.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:14.365Z,1513261994.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:14.753Z,1513261994.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:15.159Z,1513261995.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:15.555Z,1513261995.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:15.959Z,1513261995.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:16.376Z,1513261996.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:16.767Z,1513261996.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:17.151Z,1513261997.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:17.600Z,1513261997.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:17.956Z,1513261997.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:18.354Z,1513261998.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:18.776Z,1513261998.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:19.160Z,1513261999.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:19.567Z,1513261999.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:23.068Z,1513262003.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:23.203Z,1513262003.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:23.568Z,1513262003.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:23.987Z,1513262003.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:24.406Z,1513262004.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:24.767Z,1513262004.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:25.202Z,1513262005.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:25.576Z,1513262005.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:25.971Z,1513262005.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:26.371Z,1513262006.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:26.764Z,1513262006.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:27.171Z,1513262007.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:27.575Z,1513262007.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:27.971Z,1513262007.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:28.379Z,1513262008.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:28.775Z,1513262008.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:29.166Z,1513262009.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:29.561Z,1513262009.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:29.966Z,1513262009.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:30.401Z,1513262010.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:30.767Z,1513262010.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:31.176Z,1513262011.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:31.582Z,1513262011.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:31.971Z,1513262011.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:32.374Z,1513262012.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:32.767Z,1513262012.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:33.150Z,1513262013.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:33.632Z,1513262013.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:33.976Z,1513262013.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:34.383Z,1513262014.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:34.770Z,1513262014.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:35.165Z,1513262015.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:35.555Z,1513262015.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:35.953Z,1513262015.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:36.380Z,1513262016.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:36.796Z,1513262016.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:37.191Z,1513262017.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:37.576Z,1513262017.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:37.983Z,1513262017.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:38.383Z,1513262018.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:38.779Z,1513262018.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:39.159Z,1513262019.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:39.557Z,1513262019.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:40.045Z,1513262020.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:40.388Z,1513262020.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:40.776Z,1513262020.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:41.173Z,1513262021.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:41.571Z,1513262021.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:41.965Z,1513262021.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:42.379Z,1513262022.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:42.765Z,1513262022.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:43.182Z,1513262023.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:43.570Z,1513262023.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:43.981Z,1513262023.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:44.391Z,1513262024.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:44.759Z,1513262024.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:45.165Z,1513262025.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:45.610Z,1513262025.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:45.969Z,1513262025.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:46.395Z,1513262026.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:46.800Z,1513262026.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:47.161Z,1513262027.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:47.591Z,1513262027.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:47.971Z,1513262027.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:48.367Z,1513262028.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:48.763Z,1513262028.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:49.170Z,1513262029.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:49.606Z,1513262029.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:49.975Z,1513262029.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:50.363Z,1513262030.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:50.771Z,1513262030.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:51.164Z,1513262031.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:51.562Z,1513262031.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:52.019Z,1513262032.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:52.404Z,1513262032.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:52.807Z,1513262032.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:53.164Z,1513262033.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:53.563Z,1513262033.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:53.968Z,1513262033.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:54.362Z,1513262034.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:54.768Z,1513262034.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:55.181Z,1513262035.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:55.580Z,1513262035.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:56.043Z,1513262036.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:56.366Z,1513262036.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:56.767Z,1513262036.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:57.159Z,1513262037.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:57.568Z,1513262037.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:57.969Z,1513262037.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:58.375Z,1513262038.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:58.779Z,1513262038.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:59.165Z,1513262039.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:59.566Z,1513262039.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:33:59.964Z,1513262039.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:00.365Z,1513262040.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:00.771Z,1513262040.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:01.184Z,1513262041.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:01.579Z,1513262041.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:01.976Z,1513262041.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:02.399Z,1513262042.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:02.760Z,1513262042.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:03.157Z,1513262043.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:03.558Z,1513262043.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:03.986Z,1513262043.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:04.368Z,1513262044.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:04.764Z,1513262044.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:05.160Z,1513262045.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:05.560Z,1513262045.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:05.963Z,1513262045.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:06.368Z,1513262046.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:06.759Z,1513262046.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:07.164Z,1513262047.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:07.592Z,1513262047.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:08.013Z,1513262048.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:08.405Z,1513262048.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:08.801Z,1513262048.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:09.163Z,1513262049.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:09.590Z,1513262049.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:09.965Z,1513262049.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:10.399Z,1513262050.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:10.765Z,1513262050.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:11.162Z,1513262051.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:11.557Z,1513262051.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:12.007Z,1513262052.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:12.007Z,1513262052.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 280
2017-12-14T14:34:12.007Z,1513262052.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:34:12.009Z,1513262052.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:12.009Z,1513262052.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 280
2017-12-14T14:34:12.009Z,1513262052.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:34:12.014Z,1513262052.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:12.014Z,1513262052.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 280
2017-12-14T14:34:12.014Z,1513262052.014 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:34:12.065Z,1513262052.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:34:12.065Z,1513262052.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:34:12.065Z,1513262052.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:34:12.375Z,1513262052.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:34:12.376Z,1513262052.376 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 280
2017-12-14T14:34:12.376Z,1513262052.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:34:12.376Z,1513262052.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 280
2017-12-14T14:34:12.377Z,1513262052.377 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:34:12.377Z,1513262052.377 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 280
2017-12-14T14:34:12.766Z,1513262052.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:34:12.766Z,1513262052.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:34:12.767Z,1513262052.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:34:12.767Z,1513262052.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:34:12.767Z,1513262052.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:34:12.768Z,1513262052.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:34:12.768Z,1513262052.768 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:34:12.768Z,1513262052.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:34:12.769Z,1513262052.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:34:13.175Z,1513262053.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:13.576Z,1513262053.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:13.974Z,1513262053.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:14.362Z,1513262054.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:14.764Z,1513262054.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:15.171Z,1513262055.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:15.566Z,1513262055.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:15.978Z,1513262055.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:16.383Z,1513262056.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:16.778Z,1513262056.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:17.175Z,1513262057.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:17.567Z,1513262057.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:17.954Z,1513262057.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:18.352Z,1513262058.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:18.356Z,1513262058.356 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T14:29:18.2Z
2017-12-14T14:34:18.356Z,1513262058.356 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:34:18.356Z,1513262058.356 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:34:18.802Z,1513262058.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:19.555Z,1513262059.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:19.705Z,1513262059.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:23.167Z,1513262063.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:23.245Z,1513262063.245 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0324.lzma
2017-12-14T14:34:23.315Z,1513262063.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:23.631Z,1513262063.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:23.999Z,1513262063.999 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0324.lzma.bak
2017-12-14T14:34:23.000Z,1513262064.000 [DataOverHttps](INFO): SBD MOMSN=5439017
2017-12-14T14:34:24.037Z,1513262064.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:25.391Z,1513262065.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:25.542Z,1513262065.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:28.990Z,1513262068.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:29.138Z,1513262069.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:29.490Z,1513262069.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:29.859Z,1513262069.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:30.261Z,1513262070.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:30.659Z,1513262070.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:34.336Z,1513262074.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:34.400Z,1513262074.400 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0325.lzma
2017-12-14T14:34:34.507Z,1513262074.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:34.847Z,1513262074.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:35.180Z,1513262075.180 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0325.lzma.bak
2017-12-14T14:34:35.180Z,1513262075.180 [DataOverHttps](INFO): SBD MOMSN=5439019
2017-12-14T14:34:35.288Z,1513262075.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:56.444Z,1513262096.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:34:56.477Z,1513262096.477 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:34:56.477Z,1513262096.477 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:34:56.477Z,1513262096.477 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:34:56.607Z,1513262096.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:00.306Z,1513262100.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:00.509Z,1513262100.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:00.841Z,1513262100.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:01.210Z,1513262101.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:01.608Z,1513262101.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:02.009Z,1513262102.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:02.410Z,1513262102.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:02.807Z,1513262102.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:03.208Z,1513262103.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:03.612Z,1513262103.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:04.039Z,1513262104.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:04.423Z,1513262104.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:04.844Z,1513262104.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:05.209Z,1513262105.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:05.610Z,1513262105.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:06.075Z,1513262106.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:06.435Z,1513262106.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:06.832Z,1513262106.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:07.210Z,1513262107.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:07.604Z,1513262107.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:08.004Z,1513262108.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:08.408Z,1513262108.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:08.807Z,1513262108.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:09.235Z,1513262109.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:09.612Z,1513262109.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:10.036Z,1513262110.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:10.411Z,1513262110.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:10.809Z,1513262110.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:11.215Z,1513262111.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:11.610Z,1513262111.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:12.036Z,1513262112.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:12.508Z,1513262112.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:12.818Z,1513262112.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:13.220Z,1513262113.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:13.616Z,1513262113.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:14.014Z,1513262114.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:14.410Z,1513262114.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:14.825Z,1513262114.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:15.224Z,1513262115.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:15.628Z,1513262115.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:16.040Z,1513262116.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:16.411Z,1513262116.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:16.836Z,1513262116.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:17.254Z,1513262117.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:17.607Z,1513262117.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:18.059Z,1513262118.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:18.425Z,1513262118.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:18.875Z,1513262118.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:19.221Z,1513262119.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:19.622Z,1513262119.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:20.023Z,1513262120.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:20.423Z,1513262120.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:20.796Z,1513262120.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:21.222Z,1513262121.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:21.628Z,1513262121.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:22.044Z,1513262122.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:22.417Z,1513262122.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:22.810Z,1513262122.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:23.210Z,1513262123.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:23.606Z,1513262123.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:24.020Z,1513262124.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:24.427Z,1513262124.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:24.820Z,1513262124.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:25.211Z,1513262125.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:25.607Z,1513262125.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:26.016Z,1513262126.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:26.412Z,1513262126.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:26.815Z,1513262126.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:27.255Z,1513262127.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:27.619Z,1513262127.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:28.038Z,1513262128.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:28.525Z,1513262128.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:28.809Z,1513262128.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:29.215Z,1513262129.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:29.608Z,1513262129.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:30.025Z,1513262130.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:30.427Z,1513262130.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:30.827Z,1513262130.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:31.209Z,1513262131.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:31.615Z,1513262131.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:32.014Z,1513262132.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:32.458Z,1513262132.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:32.815Z,1513262132.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:33.216Z,1513262133.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:33.611Z,1513262133.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:34.009Z,1513262134.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:34.413Z,1513262134.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:34.859Z,1513262134.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:35.237Z,1513262135.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:35.611Z,1513262135.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:36.017Z,1513262136.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:36.422Z,1513262136.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:36.824Z,1513262136.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:37.215Z,1513262137.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:37.615Z,1513262137.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:38.036Z,1513262138.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:38.403Z,1513262138.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:38.797Z,1513262138.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:39.262Z,1513262139.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:39.613Z,1513262139.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:40.013Z,1513262140.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:40.423Z,1513262140.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:40.803Z,1513262140.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:41.243Z,1513262141.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:41.603Z,1513262141.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:42.019Z,1513262142.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:42.423Z,1513262142.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:42.808Z,1513262142.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:43.236Z,1513262143.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:43.603Z,1513262143.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:43.999Z,1513262143.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:44.410Z,1513262144.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:44.804Z,1513262144.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:45.212Z,1513262145.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:45.612Z,1513262145.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:46.054Z,1513262146.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:46.403Z,1513262146.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:46.800Z,1513262146.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:47.204Z,1513262147.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:47.596Z,1513262147.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:48.016Z,1513262148.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:48.419Z,1513262148.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:48.808Z,1513262148.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:49.207Z,1513262149.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:49.682Z,1513262149.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:49.000Z,1513262150.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:50.400Z,1513262150.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:50.799Z,1513262150.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:51.219Z,1513262151.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:51.614Z,1513262151.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:52.019Z,1513262152.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:52.445Z,1513262152.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:52.800Z,1513262152.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:53.204Z,1513262153.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:53.639Z,1513262153.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:54.020Z,1513262154.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:54.416Z,1513262154.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:54.808Z,1513262154.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:55.199Z,1513262155.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:55.607Z,1513262155.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:55.998Z,1513262155.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:56.540Z,1513262156.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:56.826Z,1513262156.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:35:57.219Z,1513262157.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:02.847Z,1513262162.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:02.991Z,1513262162.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:03.386Z,1513262163.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:03.752Z,1513262163.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:04.243Z,1513262164.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:04.568Z,1513262164.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:04.975Z,1513262164.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:05.368Z,1513262165.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:05.805Z,1513262165.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:06.231Z,1513262166.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:06.587Z,1513262166.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:06.955Z,1513262166.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:07.356Z,1513262167.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:07.760Z,1513262167.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:08.190Z,1513262168.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:08.588Z,1513262168.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:08.956Z,1513262168.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:09.355Z,1513262169.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:09.811Z,1513262169.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:10.148Z,1513262170.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:10.580Z,1513262170.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:10.976Z,1513262170.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:11.383Z,1513262171.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:11.775Z,1513262171.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:12.224Z,1513262172.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:12.598Z,1513262172.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:12.951Z,1513262172.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:13.352Z,1513262173.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:13.756Z,1513262173.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:14.222Z,1513262174.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:14.572Z,1513262174.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:14.968Z,1513262174.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:15.354Z,1513262175.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:15.754Z,1513262175.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:16.252Z,1513262176.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:16.567Z,1513262176.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:16.970Z,1513262176.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:17.368Z,1513262177.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:17.775Z,1513262177.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:18.279Z,1513262178.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:18.560Z,1513262178.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:18.988Z,1513262178.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:19.442Z,1513262179.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:19.772Z,1513262179.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:20.272Z,1513262180.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:20.592Z,1513262180.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:20.998Z,1513262180.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:21.365Z,1513262181.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:21.768Z,1513262181.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:22.167Z,1513262182.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:22.638Z,1513262182.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:23.016Z,1513262183.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:23.373Z,1513262183.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:23.813Z,1513262183.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:24.183Z,1513262184.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:24.675Z,1513262184.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:24.951Z,1513262184.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:25.355Z,1513262185.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:25.807Z,1513262185.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:26.315Z,1513262186.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:26.624Z,1513262186.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:26.960Z,1513262186.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:27.375Z,1513262187.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:27.792Z,1513262187.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:28.246Z,1513262188.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:28.564Z,1513262188.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:29.009Z,1513262189.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:29.378Z,1513262189.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:29.816Z,1513262189.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:30.217Z,1513262190.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:30.603Z,1513262190.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:30.963Z,1513262190.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:31.371Z,1513262191.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:31.793Z,1513262191.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:32.297Z,1513262192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:32.608Z,1513262192.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:32.991Z,1513262192.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:33.363Z,1513262193.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:33.759Z,1513262193.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:34.212Z,1513262194.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:34.568Z,1513262194.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:34.999Z,1513262194.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:35.379Z,1513262195.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:35.771Z,1513262195.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:36.171Z,1513262196.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:36.568Z,1513262196.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:36.964Z,1513262196.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:37.351Z,1513262197.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:37.748Z,1513262197.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:38.164Z,1513262198.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:38.572Z,1513262198.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:38.976Z,1513262198.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:39.351Z,1513262199.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:39.760Z,1513262199.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:40.203Z,1513262200.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:40.559Z,1513262200.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:40.983Z,1513262200.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:41.368Z,1513262201.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:41.771Z,1513262201.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:42.238Z,1513262202.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:42.556Z,1513262202.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:42.967Z,1513262202.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:43.380Z,1513262203.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:43.748Z,1513262203.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:44.210Z,1513262204.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:44.557Z,1513262204.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:44.958Z,1513262204.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:45.351Z,1513262205.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:45.744Z,1513262205.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:46.208Z,1513262206.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:46.551Z,1513262206.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:46.997Z,1513262206.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:47.388Z,1513262207.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:47.757Z,1513262207.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:48.185Z,1513262208.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:48.583Z,1513262208.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:48.944Z,1513262208.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:49.367Z,1513262209.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:49.751Z,1513262209.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:50.157Z,1513262210.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:50.575Z,1513262210.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:50.960Z,1513262210.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:51.347Z,1513262211.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:51.743Z,1513262211.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:52.151Z,1513262212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:52.559Z,1513262212.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:52.961Z,1513262212.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:53.356Z,1513262213.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:53.757Z,1513262213.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:54.212Z,1513262214.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:54.546Z,1513262214.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:54.951Z,1513262214.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:55.342Z,1513262215.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:55.751Z,1513262215.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:56.224Z,1513262216.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:56.560Z,1513262216.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:56.957Z,1513262216.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:36:57.355Z,1513262217.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:00.935Z,1513262220.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:01.047Z,1513262221.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:01.419Z,1513262221.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:01.838Z,1513262221.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:02.275Z,1513262222.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:02.609Z,1513262222.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:03.013Z,1513262223.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:03.399Z,1513262223.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:03.826Z,1513262223.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:04.223Z,1513262224.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:04.623Z,1513262224.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:05.019Z,1513262225.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:05.434Z,1513262225.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:05.839Z,1513262225.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:06.211Z,1513262226.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:06.611Z,1513262226.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:07.019Z,1513262227.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:07.424Z,1513262227.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:07.890Z,1513262227.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:08.232Z,1513262228.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:08.610Z,1513262228.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:09.002Z,1513262229.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:09.400Z,1513262229.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:09.801Z,1513262229.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:10.223Z,1513262230.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:10.616Z,1513262230.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:11.023Z,1513262231.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:11.403Z,1513262231.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:11.806Z,1513262231.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:12.230Z,1513262232.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:12.631Z,1513262232.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:13.078Z,1513262233.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:13.078Z,1513262233.078 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 281
2017-12-14T14:37:13.078Z,1513262233.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:37:13.080Z,1513262233.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:13.080Z,1513262233.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 281
2017-12-14T14:37:13.080Z,1513262233.080 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:37:13.083Z,1513262233.083 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:13.083Z,1513262233.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 281
2017-12-14T14:37:13.083Z,1513262233.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:37:13.095Z,1513262233.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:37:13.095Z,1513262233.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:37:13.096Z,1513262233.096 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:37:13.513Z,1513262233.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:37:13.513Z,1513262233.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 281
2017-12-14T14:37:13.514Z,1513262233.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:37:13.514Z,1513262233.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 281
2017-12-14T14:37:13.514Z,1513262233.514 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:37:13.515Z,1513262233.515 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 281
2017-12-14T14:37:13.818Z,1513262233.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:37:13.818Z,1513262233.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:37:13.819Z,1513262233.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:37:13.819Z,1513262233.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:37:13.819Z,1513262233.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:37:13.820Z,1513262233.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:37:13.820Z,1513262233.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:37:13.820Z,1513262233.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:37:13.853Z,1513262233.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:37:14.263Z,1513262234.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:14.616Z,1513262234.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:15.076Z,1513262235.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:15.422Z,1513262235.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:15.819Z,1513262235.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:16.281Z,1513262236.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:16.629Z,1513262236.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:17.031Z,1513262237.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:17.403Z,1513262237.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:17.823Z,1513262237.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:18.208Z,1513262238.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:18.635Z,1513262238.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:19.033Z,1513262239.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:19.435Z,1513262239.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:19.839Z,1513262239.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:20.214Z,1513262240.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:20.607Z,1513262240.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:21.006Z,1513262241.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:21.409Z,1513262241.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:21.808Z,1513262241.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:22.232Z,1513262242.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:22.613Z,1513262242.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:23.010Z,1513262243.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:23.439Z,1513262243.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:23.809Z,1513262243.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:24.240Z,1513262244.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:24.620Z,1513262244.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:25.016Z,1513262245.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:25.417Z,1513262245.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:25.817Z,1513262245.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:26.239Z,1513262246.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:26.636Z,1513262246.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:27.020Z,1513262247.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:27.591Z,1513262247.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:27.820Z,1513262247.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:28.226Z,1513262248.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:28.626Z,1513262248.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:29.022Z,1513262249.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:29.415Z,1513262249.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:29.875Z,1513262249.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:30.281Z,1513262250.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:30.607Z,1513262250.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:31.012Z,1513262251.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:31.435Z,1513262251.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:31.833Z,1513262251.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:32.215Z,1513262252.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:32.620Z,1513262252.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:33.054Z,1513262253.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:33.409Z,1513262253.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:33.839Z,1513262253.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:34.225Z,1513262254.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:34.627Z,1513262254.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:35.027Z,1513262255.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:35.470Z,1513262255.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:35.811Z,1513262255.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:36.276Z,1513262256.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:36.647Z,1513262256.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:37.027Z,1513262257.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:37.463Z,1513262257.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:37.819Z,1513262257.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:38.225Z,1513262258.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:38.607Z,1513262258.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:39.012Z,1513262259.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:39.447Z,1513262259.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:39.827Z,1513262259.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:40.224Z,1513262260.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:40.624Z,1513262260.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:41.021Z,1513262261.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:41.410Z,1513262261.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:41.810Z,1513262261.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:42.226Z,1513262262.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:42.632Z,1513262262.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:43.023Z,1513262263.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:43.422Z,1513262263.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:43.825Z,1513262263.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:44.276Z,1513262264.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:44.632Z,1513262264.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:45.002Z,1513262265.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:45.406Z,1513262265.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:45.879Z,1513262265.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:46.235Z,1513262266.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:46.639Z,1513262266.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:47.031Z,1513262267.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:47.406Z,1513262267.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:47.807Z,1513262267.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:48.207Z,1513262268.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:48.612Z,1513262268.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:49.087Z,1513262269.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:49.416Z,1513262269.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:49.819Z,1513262269.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:50.238Z,1513262270.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:50.608Z,1513262270.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:51.010Z,1513262271.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:51.409Z,1513262271.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:51.806Z,1513262271.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:52.310Z,1513262272.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:52.621Z,1513262272.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:53.013Z,1513262273.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:53.409Z,1513262273.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:53.811Z,1513262273.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:54.239Z,1513262274.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:54.609Z,1513262274.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:55.034Z,1513262275.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:55.459Z,1513262275.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:55.843Z,1513262275.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:56.235Z,1513262276.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:56.609Z,1513262276.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:57.058Z,1513262277.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:37:57.474Z,1513262277.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:00.902Z,1513262280.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:00.979Z,1513262280.979 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:38:00.979Z,1513262280.979 [NAL9602] Data Fault, FailCount= 2
2017-12-14T14:38:00.980Z,1513262280.980 [NAL9602](ERROR): Data Fault
2017-12-14T14:38:01.029Z,1513262281.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:01.059Z,1513262281.059 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:38:01.350Z,1513262281.350 [NAL9602](INFO): Powering down
2017-12-14T14:38:01.427Z,1513262281.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:01.699Z,1513262281.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:01.880Z,1513262281.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:02.223Z,1513262282.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:02.257Z,1513262282.257 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:38:02.257Z,1513262282.257 [NAL9602] No Fault, FailCount= 2
2017-12-14T14:38:02.494Z,1513262282.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:02.611Z,1513262282.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:02.901Z,1513262282.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:02.982Z,1513262282.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:03.378Z,1513262283.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:03.781Z,1513262283.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:04.224Z,1513262284.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:04.586Z,1513262284.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:05.017Z,1513262285.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:05.387Z,1513262285.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:05.784Z,1513262285.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:06.226Z,1513262286.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:06.592Z,1513262286.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:06.982Z,1513262286.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:07.380Z,1513262287.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:07.787Z,1513262287.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:08.277Z,1513262288.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:08.586Z,1513262288.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:08.985Z,1513262288.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:09.386Z,1513262289.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:09.782Z,1513262289.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:10.235Z,1513262290.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:10.618Z,1513262290.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:10.981Z,1513262290.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:11.454Z,1513262291.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:11.787Z,1513262291.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:12.234Z,1513262292.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:12.591Z,1513262292.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:12.978Z,1513262292.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:13.374Z,1513262293.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:13.777Z,1513262293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:14.190Z,1513262294.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:14.641Z,1513262294.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:14.995Z,1513262294.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:15.386Z,1513262295.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:15.685Z,1513262295.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:15.789Z,1513262295.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:16.187Z,1513262296.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:16.483Z,1513262296.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:16.587Z,1513262296.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:16.893Z,1513262296.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:16.989Z,1513262296.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:17.395Z,1513262297.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:17.690Z,1513262297.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:17.840Z,1513262297.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:18.212Z,1513262298.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:18.487Z,1513262298.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:18.594Z,1513262298.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:18.893Z,1513262298.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:18.986Z,1513262298.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:19.394Z,1513262299.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:19.846Z,1513262299.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:20.212Z,1513262300.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:20.593Z,1513262300.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:21.099Z,1513262301.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:21.380Z,1513262301.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:21.778Z,1513262301.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:22.209Z,1513262302.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:22.603Z,1513262302.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:23.026Z,1513262303.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:23.381Z,1513262303.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:23.819Z,1513262303.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:24.254Z,1513262304.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:24.619Z,1513262304.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:24.981Z,1513262304.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:25.377Z,1513262305.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:25.851Z,1513262305.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:26.235Z,1513262306.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:26.581Z,1513262306.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:26.995Z,1513262306.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:27.432Z,1513262307.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:27.787Z,1513262307.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:28.187Z,1513262308.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:28.582Z,1513262308.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:28.980Z,1513262308.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:29.387Z,1513262309.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:29.783Z,1513262309.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:30.190Z,1513262310.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:30.639Z,1513262310.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:30.988Z,1513262310.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:31.385Z,1513262311.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:31.746Z,1513262311.746 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:38:31.792Z,1513262311.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:32.227Z,1513262312.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:32.586Z,1513262312.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:33.030Z,1513262313.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:33.385Z,1513262313.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:33.827Z,1513262313.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:34.241Z,1513262314.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:34.589Z,1513262314.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:34.987Z,1513262314.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:35.395Z,1513262315.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:35.797Z,1513262315.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:36.226Z,1513262316.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:36.595Z,1513262316.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:37.050Z,1513262317.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:37.401Z,1513262317.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:37.774Z,1513262317.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:38.265Z,1513262318.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:38.607Z,1513262318.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:38.983Z,1513262318.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:39.381Z,1513262319.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:39.780Z,1513262319.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:40.286Z,1513262320.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:40.584Z,1513262320.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:40.986Z,1513262320.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:41.388Z,1513262321.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:41.422Z,1513262321.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:41.782Z,1513262321.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:42.184Z,1513262322.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:42.217Z,1513262322.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:38:42.610Z,1513262322.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:42.944Z,1513262322.944 [NAL9602](INFO): NAL9602 initialized
2017-12-14T14:38:42.979Z,1513262322.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:43.376Z,1513262323.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:43.842Z,1513262323.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:44.203Z,1513262324.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:44.605Z,1513262324.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:45.026Z,1513262325.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:45.379Z,1513262325.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:45.807Z,1513262325.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:46.228Z,1513262326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:46.652Z,1513262326.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:47.012Z,1513262327.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:47.383Z,1513262327.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:47.783Z,1513262327.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:48.217Z,1513262328.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:48.579Z,1513262328.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:48.989Z,1513262328.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:49.392Z,1513262329.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:49.795Z,1513262329.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:50.223Z,1513262330.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:50.587Z,1513262330.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:50.988Z,1513262330.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:51.392Z,1513262331.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:51.796Z,1513262331.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:52.223Z,1513262332.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:52.587Z,1513262332.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:53.031Z,1513262333.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:53.399Z,1513262333.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:53.793Z,1513262333.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:54.260Z,1513262334.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:54.595Z,1513262334.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:55.031Z,1513262335.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:55.390Z,1513262335.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:55.792Z,1513262335.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:56.241Z,1513262336.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:56.611Z,1513262336.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:56.997Z,1513262336.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:57.390Z,1513262337.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:38:57.787Z,1513262337.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:01.282Z,1513262341.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:01.415Z,1513262341.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:01.823Z,1513262341.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:02.223Z,1513262342.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:02.623Z,1513262342.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:03.009Z,1513262343.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:03.398Z,1513262343.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:03.800Z,1513262343.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:04.227Z,1513262344.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:04.623Z,1513262344.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:05.024Z,1513262345.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:05.399Z,1513262345.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:05.842Z,1513262345.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:06.235Z,1513262346.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:06.626Z,1513262346.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:07.063Z,1513262347.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:07.419Z,1513262347.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:07.812Z,1513262347.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:08.302Z,1513262348.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:08.607Z,1513262348.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:09.047Z,1513262349.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:09.418Z,1513262349.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:09.827Z,1513262349.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:10.215Z,1513262350.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:10.607Z,1513262350.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:11.012Z,1513262351.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:11.420Z,1513262351.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:11.819Z,1513262351.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:12.206Z,1513262352.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:12.603Z,1513262352.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:13.047Z,1513262353.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:13.405Z,1513262353.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:13.813Z,1513262353.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:14.225Z,1513262354.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:14.615Z,1513262354.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:15.011Z,1513262355.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:15.391Z,1513262355.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:15.816Z,1513262355.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:16.320Z,1513262356.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:16.625Z,1513262356.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:17.031Z,1513262357.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:17.426Z,1513262357.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:17.799Z,1513262357.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:18.249Z,1513262358.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:18.608Z,1513262358.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:19.011Z,1513262359.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:19.441Z,1513262359.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:19.819Z,1513262359.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:20.220Z,1513262360.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:20.600Z,1513262360.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:21.039Z,1513262361.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:21.415Z,1513262361.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:21.809Z,1513262361.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:22.289Z,1513262362.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:22.302Z,1513262362.302 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:39:22.675Z,1513262362.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:23.015Z,1513262363.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:23.413Z,1513262363.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:23.820Z,1513262363.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:24.211Z,1513262364.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:24.610Z,1513262364.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:25.010Z,1513262365.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:25.419Z,1513262365.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:25.862Z,1513262365.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:26.211Z,1513262366.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:26.617Z,1513262366.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:27.016Z,1513262367.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:27.430Z,1513262367.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:27.812Z,1513262367.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:28.221Z,1513262368.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:28.622Z,1513262368.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:29.034Z,1513262369.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:29.400Z,1513262369.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:29.836Z,1513262369.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:30.232Z,1513262370.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:30.630Z,1513262370.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:31.004Z,1513262371.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:31.443Z,1513262371.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:31.807Z,1513262371.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:32.249Z,1513262372.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:32.603Z,1513262372.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:33.000Z,1513262373.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:33.428Z,1513262373.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:33.844Z,1513262373.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:34.216Z,1513262374.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:34.599Z,1513262374.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:35.011Z,1513262375.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:35.483Z,1513262375.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:35.808Z,1513262375.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:36.260Z,1513262376.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:36.611Z,1513262376.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:37.023Z,1513262377.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:37.463Z,1513262377.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:37.815Z,1513262377.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:38.204Z,1513262378.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:38.676Z,1513262378.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:39.006Z,1513262379.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:39.416Z,1513262379.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:39.851Z,1513262379.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:40.215Z,1513262380.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:40.606Z,1513262380.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:40.991Z,1513262380.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:41.395Z,1513262381.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:41.834Z,1513262381.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:42.228Z,1513262382.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:42.608Z,1513262382.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:43.026Z,1513262383.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:43.399Z,1513262383.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:43.807Z,1513262383.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:44.234Z,1513262384.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:44.608Z,1513262384.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:45.042Z,1513262385.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:45.407Z,1513262385.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:45.807Z,1513262385.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:46.230Z,1513262386.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:46.606Z,1513262386.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:46.997Z,1513262386.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:47.406Z,1513262387.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:47.801Z,1513262387.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:48.283Z,1513262388.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:48.611Z,1513262388.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:49.091Z,1513262389.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:49.408Z,1513262389.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:49.804Z,1513262389.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:50.256Z,1513262390.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:50.603Z,1513262390.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:51.018Z,1513262391.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:51.456Z,1513262391.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:51.894Z,1513262391.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:52.198Z,1513262392.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:52.643Z,1513262392.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:53.020Z,1513262393.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:53.447Z,1513262393.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:53.831Z,1513262393.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:54.203Z,1513262394.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:54.634Z,1513262394.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:55.031Z,1513262395.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:55.427Z,1513262395.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:55.946Z,1513262395.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:56.197Z,1513262396.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:56.598Z,1513262396.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:57.008Z,1513262397.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:57.020Z,1513262397.020 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T14:39:57.020Z,1513262397.020 [Default:CheckIn:C.Wait] Stopped
2017-12-14T14:39:57.020Z,1513262397.020 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T14:39:57.020Z,1513262397.020 [Default:CheckIn:D] Running Loop=1
2017-12-14T14:39:57.406Z,1513262397.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:57.410Z,1513262397.410 [Default:CheckIn:D] Stopped
2017-12-14T14:39:57.410Z,1513262397.410 [Default:CheckIn:E] Running Loop=1
2017-12-14T14:39:57.882Z,1513262397.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:39:57.886Z,1513262397.886 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 846.700326 min 
2017-12-14T14:39:57.886Z,1513262397.886 [Default:CheckIn:E] Stopped
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn] Stopped
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn](INFO): Running loop #82
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn] Running Loop=82
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T14:39:57.887Z,1513262397.887 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T14:40:01.236Z,1513262401.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:01.350Z,1513262401.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:01.755Z,1513262401.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:02.237Z,1513262402.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:02.540Z,1513262402.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:02.923Z,1513262402.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:03.335Z,1513262403.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:03.706Z,1513262403.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x44573 got:0x1858
2017-12-14T14:40:03.746Z,1513262403.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:04.166Z,1513262404.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:04.538Z,1513262404.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:04.931Z,1513262404.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:05.323Z,1513262405.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:05.725Z,1513262405.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:06.121Z,1513262406.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:06.582Z,1513262406.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:06.906Z,1513262406.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:07.307Z,1513262407.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:07.736Z,1513262407.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:08.126Z,1513262408.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:08.573Z,1513262408.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:08.913Z,1513262408.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:09.335Z,1513262409.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:09.732Z,1513262409.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:10.190Z,1513262410.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:10.567Z,1513262410.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:10.917Z,1513262410.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:11.335Z,1513262411.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:11.707Z,1513262411.707 [PNI_TCM](ERROR): CRC does not match. Expected:0x60371 got:0x6977
2017-12-14T14:40:11.746Z,1513262411.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:12.201Z,1513262412.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:12.526Z,1513262412.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:12.930Z,1513262412.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:13.326Z,1513262413.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:13.818Z,1513262413.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:14.230Z,1513262414.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:14.230Z,1513262414.230 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 282
2017-12-14T14:40:14.230Z,1513262414.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:40:14.232Z,1513262414.232 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:14.232Z,1513262414.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 282
2017-12-14T14:40:14.232Z,1513262414.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:40:14.234Z,1513262414.234 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:14.234Z,1513262414.234 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 282
2017-12-14T14:40:14.234Z,1513262414.234 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:40:14.258Z,1513262414.258 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:40:14.258Z,1513262414.258 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:40:14.258Z,1513262414.258 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:40:14.540Z,1513262414.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:40:14.540Z,1513262414.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 282
2017-12-14T14:40:14.541Z,1513262414.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:40:14.541Z,1513262414.541 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 282
2017-12-14T14:40:14.542Z,1513262414.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:40:14.542Z,1513262414.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 282
2017-12-14T14:40:14.903Z,1513262414.903 [PNI_TCM](ERROR): CRC does not match. Expected:0x4789 got:0x41991
2017-12-14T14:40:14.930Z,1513262414.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:40:14.930Z,1513262414.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:40:14.931Z,1513262414.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:40:14.931Z,1513262414.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:40:14.931Z,1513262414.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:40:14.932Z,1513262414.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:40:14.932Z,1513262414.932 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:40:14.933Z,1513262414.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:40:14.933Z,1513262414.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:40:15.331Z,1513262415.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:15.716Z,1513262415.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:16.196Z,1513262416.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:16.520Z,1513262416.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:16.923Z,1513262416.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:17.311Z,1513262417.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:17.719Z,1513262417.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:18.117Z,1513262418.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:18.527Z,1513262418.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:18.919Z,1513262418.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:19.316Z,1513262419.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:19.721Z,1513262419.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T14:40:19.747Z,1513262419.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:20.216Z,1513262420.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:20.561Z,1513262420.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:20.931Z,1513262420.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:21.326Z,1513262421.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:21.707Z,1513262421.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:22.135Z,1513262422.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:22.587Z,1513262422.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:22.944Z,1513262422.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:23.332Z,1513262423.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:23.714Z,1513262423.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:24.182Z,1513262424.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:24.555Z,1513262424.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:24.917Z,1513262424.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:25.330Z,1513262425.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:25.735Z,1513262425.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:26.179Z,1513262426.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:26.551Z,1513262426.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:26.924Z,1513262426.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:27.338Z,1513262427.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:27.701Z,1513262427.701 [PNI_TCM](ERROR): CRC does not match. Expected:0x3641 got:0x16896
2017-12-14T14:40:27.739Z,1513262427.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:28.184Z,1513262428.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:28.520Z,1513262428.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:28.936Z,1513262428.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:29.307Z,1513262429.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:29.755Z,1513262429.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:30.189Z,1513262430.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:30.532Z,1513262430.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:30.911Z,1513262430.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x5593 got:0x39451
2017-12-14T14:40:30.931Z,1513262430.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:31.317Z,1513262431.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:31.727Z,1513262431.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:32.134Z,1513262432.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:32.515Z,1513262432.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:32.918Z,1513262432.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:33.323Z,1513262433.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:33.405Z,1513262433.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:40:33.727Z,1513262433.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:34.121Z,1513262434.121 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T14:40:34.147Z,1513262434.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:34.201Z,1513262434.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:40:34.572Z,1513262434.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:34.939Z,1513262434.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:35.347Z,1513262435.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:35.710Z,1513262435.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:36.144Z,1513262436.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:36.600Z,1513262436.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:36.951Z,1513262436.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:37.315Z,1513262437.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:37.740Z,1513262437.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:38.204Z,1513262438.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:38.562Z,1513262438.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:38.907Z,1513262438.907 [PNI_TCM](ERROR): CRC does not match. Expected:0x24740 got:0x1858
2017-12-14T14:40:38.946Z,1513262438.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:39.342Z,1513262439.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:39.711Z,1513262439.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:40.198Z,1513262440.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:40.523Z,1513262440.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:40.924Z,1513262440.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:41.319Z,1513262441.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:41.747Z,1513262441.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:42.160Z,1513262442.160 [PNI_TCM](ERROR): CRC does not match. Expected:0x37592 got:0x1858
2017-12-14T14:40:42.187Z,1513262442.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:42.564Z,1513262442.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:42.923Z,1513262442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:43.327Z,1513262443.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:43.735Z,1513262443.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:44.185Z,1513262444.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:44.507Z,1513262444.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:44.935Z,1513262444.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:45.302Z,1513262445.302 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T14:40:45.339Z,1513262445.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:45.742Z,1513262445.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:46.134Z,1513262446.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:46.533Z,1513262446.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:46.947Z,1513262446.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:47.320Z,1513262447.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:47.801Z,1513262447.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:48.118Z,1513262448.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:48.568Z,1513262448.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:48.979Z,1513262448.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:49.327Z,1513262449.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:49.730Z,1513262449.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:50.131Z,1513262450.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:50.574Z,1513262450.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:50.917Z,1513262450.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:51.331Z,1513262451.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:51.704Z,1513262451.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:52.217Z,1513262452.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:52.532Z,1513262452.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:52.934Z,1513262452.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:53.319Z,1513262453.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:53.720Z,1513262453.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:54.183Z,1513262454.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:54.542Z,1513262454.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:54.904Z,1513262454.904 [PNI_TCM](ERROR): CRC does not match. Expected:0x5906 got:0x224
2017-12-14T14:40:54.943Z,1513262454.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:55.333Z,1513262455.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:55.747Z,1513262455.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:56.190Z,1513262456.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:56.518Z,1513262456.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:56.924Z,1513262456.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:57.318Z,1513262457.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:57.727Z,1513262457.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:40:58.200Z,1513262458.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:01.583Z,1513262461.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:01.722Z,1513262461.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:02.093Z,1513262462.093 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:41:02.093Z,1513262462.093 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:41:02.094Z,1513262462.094 [BPC1](ERROR): Communications Fault
2017-12-14T14:41:02.102Z,1513262462.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:02.115Z,1513262462.115 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:41:02.589Z,1513262462.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:02.885Z,1513262462.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:03.338Z,1513262463.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:03.352Z,1513262463.352 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:41:03.352Z,1513262463.352 [BPC1] No Fault, FailCount= 1
2017-12-14T14:41:03.751Z,1513262463.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:04.111Z,1513262464.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:04.560Z,1513262464.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:04.908Z,1513262464.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:05.292Z,1513262465.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:05.677Z,1513262465.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:06.081Z,1513262466.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:06.498Z,1513262466.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:06.899Z,1513262466.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:07.306Z,1513262467.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:07.698Z,1513262467.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:08.208Z,1513262468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:08.501Z,1513262468.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:08.907Z,1513262468.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:09.295Z,1513262469.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:09.700Z,1513262469.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:10.158Z,1513262470.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:10.504Z,1513262470.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:10.893Z,1513262470.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:11.290Z,1513262471.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:11.690Z,1513262471.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:12.170Z,1513262472.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:12.500Z,1513262472.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:12.903Z,1513262472.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:13.307Z,1513262473.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:13.702Z,1513262473.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:14.075Z,1513262474.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:14.523Z,1513262474.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:14.887Z,1513262474.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:15.370Z,1513262475.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:15.713Z,1513262475.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:16.096Z,1513262476.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:16.548Z,1513262476.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:16.894Z,1513262476.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:17.274Z,1513262477.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:17.718Z,1513262477.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:18.107Z,1513262478.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:18.567Z,1513262478.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:18.912Z,1513262478.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:19.318Z,1513262479.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:19.702Z,1513262479.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:20.158Z,1513262480.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:20.539Z,1513262480.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:20.923Z,1513262480.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:21.322Z,1513262481.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:21.739Z,1513262481.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:22.147Z,1513262482.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:22.514Z,1513262482.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:22.931Z,1513262482.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:23.310Z,1513262483.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:23.714Z,1513262483.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:24.182Z,1513262484.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:24.500Z,1513262484.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:24.932Z,1513262484.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:25.306Z,1513262485.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:25.710Z,1513262485.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:26.167Z,1513262486.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:26.492Z,1513262486.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:26.884Z,1513262486.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:27.301Z,1513262487.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:27.712Z,1513262487.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:28.119Z,1513262488.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:28.539Z,1513262488.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:28.913Z,1513262488.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:29.312Z,1513262489.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:29.722Z,1513262489.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:30.115Z,1513262490.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:30.561Z,1513262490.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:30.926Z,1513262490.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:31.324Z,1513262491.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:31.726Z,1513262491.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:32.134Z,1513262492.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:32.596Z,1513262492.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:32.915Z,1513262492.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:33.330Z,1513262493.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:33.764Z,1513262493.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:34.168Z,1513262494.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:34.508Z,1513262494.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:34.890Z,1513262494.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:35.331Z,1513262495.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:35.711Z,1513262495.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:36.173Z,1513262496.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:36.512Z,1513262496.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:36.912Z,1513262496.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:37.304Z,1513262497.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:37.703Z,1513262497.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:38.072Z,1513262498.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:38.496Z,1513262498.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:38.907Z,1513262498.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:39.320Z,1513262499.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:39.725Z,1513262499.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:40.194Z,1513262500.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:40.523Z,1513262500.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:40.920Z,1513262500.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:41.308Z,1513262501.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:41.707Z,1513262501.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:42.114Z,1513262502.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:42.535Z,1513262502.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:42.902Z,1513262502.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:43.288Z,1513262503.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:43.676Z,1513262503.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:44.106Z,1513262504.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:44.571Z,1513262504.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:44.919Z,1513262504.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:45.293Z,1513262505.293 [PNI_TCM](ERROR): CRC does not match. Expected:0x15126 got:0x16533
2017-12-14T14:41:45.347Z,1513262505.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:45.724Z,1513262505.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:46.083Z,1513262506.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:46.567Z,1513262506.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:46.887Z,1513262506.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:47.309Z,1513262507.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:47.667Z,1513262507.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:48.146Z,1513262508.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:48.487Z,1513262508.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:48.906Z,1513262508.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:49.260Z,1513262509.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:49.668Z,1513262509.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:50.077Z,1513262510.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:50.466Z,1513262510.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:50.875Z,1513262510.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:51.302Z,1513262511.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:51.684Z,1513262511.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:52.080Z,1513262512.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:52.470Z,1513262512.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:52.863Z,1513262512.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:53.274Z,1513262513.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:53.666Z,1513262513.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:54.080Z,1513262514.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:54.507Z,1513262514.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:54.902Z,1513262514.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:55.286Z,1513262515.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:55.710Z,1513262515.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:56.111Z,1513262516.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:56.488Z,1513262516.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:56.868Z,1513262516.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:57.282Z,1513262517.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:57.709Z,1513262517.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:58.091Z,1513262518.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:41:58.523Z,1513262518.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:01.846Z,1513262521.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x48112 got:0x73
2017-12-14T14:42:01.846Z,1513262521.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x11153 got:0x14
2017-12-14T14:42:01.847Z,1513262521.847 [PNI_TCM](ERROR): CRC does not match. Expected:0x64260 got:0x140
2017-12-14T14:42:01.847Z,1513262521.847 [PNI_TCM](ERROR): CRC does not match. Expected:0x53170 got:0x93
2017-12-14T14:42:01.847Z,1513262521.847 [PNI_TCM](ERROR): CRC does not match. Expected:0x43442 got:0x17
2017-12-14T14:42:01.848Z,1513262521.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x56279 got:0x187
2017-12-14T14:42:01.848Z,1513262521.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x33490 got:0x136
2017-12-14T14:42:01.848Z,1513262521.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x15792 got:0x247
2017-12-14T14:42:01.876Z,1513262521.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:02.007Z,1513262522.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:02.354Z,1513262522.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:02.764Z,1513262522.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:03.163Z,1513262523.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:03.538Z,1513262523.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:03.966Z,1513262523.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:04.419Z,1513262524.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:04.744Z,1513262524.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:05.155Z,1513262525.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:05.584Z,1513262525.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:05.955Z,1513262525.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:06.373Z,1513262526.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:06.770Z,1513262526.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:07.165Z,1513262527.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:07.544Z,1513262527.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:07.968Z,1513262527.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:08.352Z,1513262528.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:08.754Z,1513262528.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:09.179Z,1513262529.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:09.547Z,1513262529.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:09.968Z,1513262529.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:10.383Z,1513262530.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:10.751Z,1513262530.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:11.171Z,1513262531.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:11.559Z,1513262531.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:11.974Z,1513262531.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:12.342Z,1513262532.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:12.751Z,1513262532.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:13.151Z,1513262533.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:13.594Z,1513262533.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:13.958Z,1513262533.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:14.405Z,1513262534.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:14.778Z,1513262534.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:15.171Z,1513262535.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:15.546Z,1513262535.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:15.939Z,1513262535.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:16.368Z,1513262536.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:16.783Z,1513262536.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:17.151Z,1513262537.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:17.569Z,1513262537.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:18.020Z,1513262538.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:18.348Z,1513262538.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:18.743Z,1513262538.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:19.147Z,1513262539.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:19.550Z,1513262539.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:19.951Z,1513262539.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:20.375Z,1513262540.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:20.776Z,1513262540.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:21.154Z,1513262541.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:21.547Z,1513262541.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:21.943Z,1513262541.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:22.355Z,1513262542.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:22.746Z,1513262542.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:23.153Z,1513262543.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:23.552Z,1513262543.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:24.025Z,1513262544.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:24.348Z,1513262544.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:24.758Z,1513262544.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:25.150Z,1513262545.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:25.555Z,1513262545.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:25.949Z,1513262545.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:26.378Z,1513262546.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:26.767Z,1513262546.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:27.167Z,1513262547.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:27.559Z,1513262547.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:27.950Z,1513262547.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:28.358Z,1513262548.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:28.779Z,1513262548.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:29.254Z,1513262549.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:29.571Z,1513262549.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:29.987Z,1513262549.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:30.347Z,1513262550.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:30.748Z,1513262550.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:31.179Z,1513262551.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:31.552Z,1513262551.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:31.984Z,1513262551.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:32.352Z,1513262552.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:32.802Z,1513262552.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:33.159Z,1513262553.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:33.551Z,1513262553.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:33.951Z,1513262553.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:34.349Z,1513262554.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:34.749Z,1513262554.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:35.159Z,1513262555.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:35.553Z,1513262555.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:35.989Z,1513262555.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:36.349Z,1513262556.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:36.753Z,1513262556.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:37.150Z,1513262557.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:37.552Z,1513262557.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:37.952Z,1513262557.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:38.364Z,1513262558.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:38.764Z,1513262558.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:39.167Z,1513262559.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:39.548Z,1513262559.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:39.959Z,1513262559.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:40.387Z,1513262560.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:40.764Z,1513262560.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:41.171Z,1513262561.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:41.561Z,1513262561.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:41.963Z,1513262561.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:42.415Z,1513262562.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:42.770Z,1513262562.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:43.152Z,1513262563.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:43.546Z,1513262563.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:43.979Z,1513262563.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:44.383Z,1513262564.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:44.784Z,1513262564.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:45.174Z,1513262565.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:45.551Z,1513262565.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:45.952Z,1513262565.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:46.348Z,1513262566.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:46.751Z,1513262566.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:47.187Z,1513262567.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:47.553Z,1513262567.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:47.981Z,1513262567.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:48.356Z,1513262568.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:48.786Z,1513262568.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:49.151Z,1513262569.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:49.549Z,1513262569.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:49.955Z,1513262569.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:50.354Z,1513262570.354 [BPC1](ERROR): Failed to parse message.
2017-12-14T14:42:50.355Z,1513262570.355 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T14:42:50.355Z,1513262570.355 [BPC1] Data Fault, FailCount= 1
2017-12-14T14:42:50.355Z,1513262570.355 [BPC1](ERROR): Data Fault
2017-12-14T14:42:50.363Z,1513262570.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:50.405Z,1513262570.405 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T14:42:50.767Z,1513262570.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:51.160Z,1513262571.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:51.554Z,1513262571.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:51.567Z,1513262571.567 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:42:51.567Z,1513262571.567 [BPC1] No Fault, FailCount= 1
2017-12-14T14:42:52.063Z,1513262572.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:52.350Z,1513262572.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:52.759Z,1513262572.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:53.166Z,1513262573.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:53.564Z,1513262573.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:53.965Z,1513262573.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:54.353Z,1513262574.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:54.755Z,1513262574.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:55.159Z,1513262575.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:55.564Z,1513262575.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:55.958Z,1513262575.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:56.361Z,1513262576.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:56.766Z,1513262576.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:57.171Z,1513262577.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:57.560Z,1513262577.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:57.958Z,1513262577.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:58.379Z,1513262578.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:42:58.766Z,1513262578.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:02.462Z,1513262582.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:02.597Z,1513262582.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:02.970Z,1513262582.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:03.338Z,1513262583.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:03.737Z,1513262583.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:04.220Z,1513262584.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:04.551Z,1513262584.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:04.948Z,1513262584.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:05.350Z,1513262585.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:05.752Z,1513262585.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:06.226Z,1513262586.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:06.536Z,1513262586.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:06.976Z,1513262586.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:07.360Z,1513262587.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:07.737Z,1513262587.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:08.149Z,1513262588.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:08.568Z,1513262588.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:08.955Z,1513262588.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:09.347Z,1513262589.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:09.748Z,1513262589.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:10.144Z,1513262590.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:10.573Z,1513262590.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:10.967Z,1513262590.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:11.351Z,1513262591.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:11.751Z,1513262591.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:12.209Z,1513262592.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:12.546Z,1513262592.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:12.947Z,1513262592.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:13.338Z,1513262593.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:13.791Z,1513262593.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.319Z,1513262594.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.598Z,1513262594.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.951Z,1513262594.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.951Z,1513262594.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 283
2017-12-14T14:43:14.951Z,1513262594.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:43:14.953Z,1513262594.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.953Z,1513262594.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 283
2017-12-14T14:43:14.953Z,1513262594.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:43:14.955Z,1513262594.955 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:14.955Z,1513262594.955 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 283
2017-12-14T14:43:14.955Z,1513262594.955 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:43:14.967Z,1513262594.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:43:14.968Z,1513262594.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:43:14.968Z,1513262594.968 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:43:15.429Z,1513262595.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:43:15.429Z,1513262595.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 283
2017-12-14T14:43:15.430Z,1513262595.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:43:15.430Z,1513262595.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 283
2017-12-14T14:43:15.430Z,1513262595.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:43:15.430Z,1513262595.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 283
2017-12-14T14:43:15.750Z,1513262595.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:43:15.750Z,1513262595.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:43:15.751Z,1513262595.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:43:15.751Z,1513262595.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:43:15.751Z,1513262595.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:43:15.752Z,1513262595.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:43:15.752Z,1513262595.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:43:15.757Z,1513262595.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:43:15.757Z,1513262595.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:43:16.208Z,1513262596.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:16.543Z,1513262596.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:16.942Z,1513262596.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:17.366Z,1513262597.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:17.767Z,1513262597.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:18.213Z,1513262598.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:18.568Z,1513262598.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:18.937Z,1513262598.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:19.336Z,1513262599.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:19.736Z,1513262599.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:20.212Z,1513262600.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:20.563Z,1513262600.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:20.949Z,1513262600.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:21.339Z,1513262601.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:21.752Z,1513262601.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:22.136Z,1513262602.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:22.570Z,1513262602.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:22.935Z,1513262602.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:23.360Z,1513262603.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:23.755Z,1513262603.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:24.163Z,1513262604.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:24.726Z,1513262604.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:24.941Z,1513262604.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:25.336Z,1513262605.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:25.736Z,1513262605.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:26.197Z,1513262606.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:26.554Z,1513262606.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:26.954Z,1513262606.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:27.342Z,1513262607.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:27.747Z,1513262607.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:28.204Z,1513262608.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:28.563Z,1513262608.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:28.932Z,1513262608.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:29.360Z,1513262609.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:29.783Z,1513262609.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:30.223Z,1513262610.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:30.546Z,1513262610.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:30.977Z,1513262610.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:31.344Z,1513262611.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:31.740Z,1513262611.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:32.208Z,1513262612.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:32.555Z,1513262612.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:32.952Z,1513262612.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:33.338Z,1513262613.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:33.743Z,1513262613.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:34.261Z,1513262614.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:34.556Z,1513262614.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:34.952Z,1513262614.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:35.351Z,1513262615.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:35.755Z,1513262615.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:36.143Z,1513262616.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:36.551Z,1513262616.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:36.942Z,1513262616.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:37.426Z,1513262617.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:37.759Z,1513262617.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:38.151Z,1513262618.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:38.591Z,1513262618.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:38.940Z,1513262618.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:39.380Z,1513262619.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:39.747Z,1513262619.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:40.212Z,1513262620.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:40.603Z,1513262620.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:40.967Z,1513262620.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:41.336Z,1513262621.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:41.738Z,1513262621.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:42.208Z,1513262622.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:42.556Z,1513262622.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:42.938Z,1513262622.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:43.344Z,1513262623.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:43.819Z,1513262623.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:44.224Z,1513262624.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:44.556Z,1513262624.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:44.936Z,1513262624.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:45.339Z,1513262625.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:45.743Z,1513262625.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:46.212Z,1513262626.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:46.564Z,1513262626.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:46.988Z,1513262626.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:47.339Z,1513262627.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:47.764Z,1513262627.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:48.168Z,1513262628.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:48.559Z,1513262628.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:48.961Z,1513262628.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:49.357Z,1513262629.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:49.769Z,1513262629.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:50.204Z,1513262630.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:50.563Z,1513262630.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:50.943Z,1513262630.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:51.335Z,1513262631.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:51.738Z,1513262631.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:52.144Z,1513262632.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:52.573Z,1513262632.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:52.945Z,1513262632.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:53.389Z,1513262633.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:53.741Z,1513262633.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:54.208Z,1513262634.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:54.543Z,1513262634.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:54.951Z,1513262634.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:55.359Z,1513262635.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:55.759Z,1513262635.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:56.211Z,1513262636.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:56.574Z,1513262636.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:56.947Z,1513262636.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:57.357Z,1513262637.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:57.756Z,1513262637.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:58.209Z,1513262638.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:58.561Z,1513262638.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:43:58.947Z,1513262638.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:02.456Z,1513262642.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:02.600Z,1513262642.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:02.979Z,1513262642.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:03.384Z,1513262643.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:03.814Z,1513262643.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:04.169Z,1513262644.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:04.620Z,1513262644.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:04.969Z,1513262644.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:05.375Z,1513262645.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:05.772Z,1513262645.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:06.201Z,1513262646.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:06.584Z,1513262646.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:06.955Z,1513262646.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:07.357Z,1513262647.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:07.762Z,1513262647.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:08.212Z,1513262648.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:08.566Z,1513262648.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:08.960Z,1513262648.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:09.429Z,1513262649.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:09.759Z,1513262649.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:10.215Z,1513262650.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:10.571Z,1513262650.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:10.967Z,1513262650.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:11.368Z,1513262651.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:11.769Z,1513262651.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:12.212Z,1513262652.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:12.611Z,1513262652.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:13.011Z,1513262653.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:13.364Z,1513262653.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:13.764Z,1513262653.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:14.227Z,1513262654.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:14.579Z,1513262654.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:14.973Z,1513262654.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:15.345Z,1513262655.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:15.828Z,1513262655.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:16.224Z,1513262656.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:16.565Z,1513262656.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:16.962Z,1513262656.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:17.364Z,1513262657.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:17.764Z,1513262657.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:18.164Z,1513262658.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:18.587Z,1513262658.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:19.011Z,1513262659.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:19.364Z,1513262659.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:19.761Z,1513262659.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:20.171Z,1513262660.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:20.574Z,1513262660.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:20.979Z,1513262660.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:21.364Z,1513262661.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:21.767Z,1513262661.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:22.270Z,1513262662.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:22.578Z,1513262662.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:22.976Z,1513262662.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:23.381Z,1513262663.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:23.775Z,1513262663.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:24.228Z,1513262664.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:24.583Z,1513262664.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:25.040Z,1513262665.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:25.427Z,1513262665.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:25.796Z,1513262665.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:26.204Z,1513262666.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:26.594Z,1513262666.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:26.963Z,1513262666.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:27.363Z,1513262667.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:27.760Z,1513262667.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:28.211Z,1513262668.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:28.605Z,1513262668.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:28.960Z,1513262668.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:29.357Z,1513262669.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:29.759Z,1513262669.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:30.239Z,1513262670.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:30.580Z,1513262670.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:31.003Z,1513262671.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:31.360Z,1513262671.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:31.842Z,1513262671.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:32.157Z,1513262672.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:32.568Z,1513262672.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:32.956Z,1513262672.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:33.375Z,1513262673.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:33.779Z,1513262673.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:34.176Z,1513262674.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:34.572Z,1513262674.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:35.003Z,1513262675.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:35.356Z,1513262675.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:35.763Z,1513262675.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:36.210Z,1513262676.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:36.567Z,1513262676.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:36.979Z,1513262676.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:37.367Z,1513262677.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:37.763Z,1513262677.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:38.282Z,1513262678.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:38.556Z,1513262678.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:38.968Z,1513262678.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:39.375Z,1513262679.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:39.766Z,1513262679.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:40.212Z,1513262680.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:40.559Z,1513262680.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:40.972Z,1513262680.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:41.368Z,1513262681.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:41.779Z,1513262681.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:42.208Z,1513262682.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:42.566Z,1513262682.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:42.960Z,1513262682.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:43.368Z,1513262683.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:43.767Z,1513262683.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:44.237Z,1513262684.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:44.608Z,1513262684.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:44.954Z,1513262684.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:45.357Z,1513262685.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:45.763Z,1513262685.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:46.160Z,1513262686.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:46.587Z,1513262686.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:46.918Z,1513262686.918 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T14:44:46.918Z,1513262686.918 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T14:44:46.918Z,1513262686.918 [DropWeight](ERROR): Hardware Fault
2017-12-14T14:44:46.994Z,1513262686.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:47.014Z,1513262687.014 [CBIT](INFO): Critical error at 20171214T144446
2017-12-14T14:44:47.016Z,1513262687.016 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T14:44:47.021Z,1513262687.021 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T14:44:47.415Z,1513262687.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:47.437Z,1513262687.437 [CBIT](INFO): Critical error at 20171214T144447
2017-12-14T14:44:47.784Z,1513262687.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:48.190Z,1513262688.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:48.572Z,1513262688.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:48.990Z,1513262688.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:49.377Z,1513262689.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:49.760Z,1513262689.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:50.210Z,1513262690.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:50.563Z,1513262690.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:50.999Z,1513262690.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:51.364Z,1513262691.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:51.758Z,1513262691.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:52.220Z,1513262692.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:52.588Z,1513262692.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:52.968Z,1513262692.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:53.355Z,1513262693.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:53.763Z,1513262693.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:54.255Z,1513262694.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:54.562Z,1513262694.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:54.967Z,1513262694.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:55.368Z,1513262695.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:55.775Z,1513262695.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:56.217Z,1513262696.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:56.574Z,1513262696.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:56.959Z,1513262696.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:57.415Z,1513262697.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:57.771Z,1513262697.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:58.234Z,1513262698.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:58.246Z,1513262698.246 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T14:39:57.9Z
2017-12-14T14:44:58.246Z,1513262698.246 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:44:58.246Z,1513262698.246 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:44:58.572Z,1513262698.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:44:59.367Z,1513262699.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:02.750Z,1513262702.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:02.808Z,1513262702.808 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0328.lzma
2017-12-14T14:45:02.871Z,1513262702.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:03.221Z,1513262703.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:03.576Z,1513262703.576 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0328.lzma.bak
2017-12-14T14:45:03.576Z,1513262703.576 [DataOverHttps](INFO): SBD MOMSN=5439023
2017-12-14T14:45:03.650Z,1513262703.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:24.649Z,1513262724.649 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:45:24.649Z,1513262724.649 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:45:24.649Z,1513262724.649 [BPC1](ERROR): Communications Fault
2017-12-14T14:45:24.658Z,1513262724.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:24.672Z,1513262724.672 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:45:24.815Z,1513262724.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:28.220Z,1513262728.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:28.366Z,1513262728.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:28.380Z,1513262728.380 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:45:28.380Z,1513262728.380 [BPC1] No Fault, FailCount= 1
2017-12-14T14:45:28.796Z,1513262728.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:29.120Z,1513262729.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:29.500Z,1513262729.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:29.891Z,1513262729.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:33.538Z,1513262733.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:33.618Z,1513262733.618 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0329.lzma
2017-12-14T14:45:33.687Z,1513262733.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:34.040Z,1513262734.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:34.384Z,1513262734.384 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0329.lzma.bak
2017-12-14T14:45:34.384Z,1513262734.384 [DataOverHttps](INFO): SBD MOMSN=5439027
2017-12-14T14:45:34.467Z,1513262734.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:35.707Z,1513262735.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:35.711Z,1513262735.711 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:45:35.711Z,1513262735.711 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:45:35.711Z,1513262735.711 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:45:35.859Z,1513262735.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:39.339Z,1513262739.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:39.463Z,1513262739.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:39.817Z,1513262739.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:40.268Z,1513262740.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:40.618Z,1513262740.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:41.015Z,1513262741.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:41.446Z,1513262741.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:41.819Z,1513262741.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:42.220Z,1513262742.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:42.653Z,1513262742.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:43.023Z,1513262743.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:43.417Z,1513262743.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:43.818Z,1513262743.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:44.223Z,1513262744.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:44.653Z,1513262744.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:45.039Z,1513262745.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:45.427Z,1513262745.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:45.821Z,1513262745.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:46.227Z,1513262746.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:46.618Z,1513262746.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:47.064Z,1513262747.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:47.429Z,1513262747.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:47.911Z,1513262747.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:48.229Z,1513262748.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:48.615Z,1513262748.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:49.023Z,1513262749.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:49.415Z,1513262749.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:49.812Z,1513262749.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:50.225Z,1513262750.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:50.628Z,1513262750.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:51.043Z,1513262751.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:51.454Z,1513262751.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:51.838Z,1513262751.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:52.211Z,1513262752.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:52.612Z,1513262752.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:53.043Z,1513262753.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:53.442Z,1513262753.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:53.850Z,1513262753.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:54.310Z,1513262754.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:54.612Z,1513262754.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:55.019Z,1513262755.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:55.422Z,1513262755.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:55.827Z,1513262755.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:56.210Z,1513262756.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:56.627Z,1513262756.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:57.031Z,1513262757.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:57.456Z,1513262757.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:57.827Z,1513262757.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:58.217Z,1513262758.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:58.615Z,1513262758.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:59.031Z,1513262759.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:59.430Z,1513262759.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:45:59.827Z,1513262759.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:00.228Z,1513262760.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:00.638Z,1513262760.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:01.024Z,1513262761.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:01.426Z,1513262761.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:01.835Z,1513262761.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:02.246Z,1513262762.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:02.607Z,1513262762.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:03.036Z,1513262763.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:03.432Z,1513262763.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:03.902Z,1513262763.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:04.236Z,1513262764.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:04.664Z,1513262764.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:05.031Z,1513262765.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:05.410Z,1513262765.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:05.807Z,1513262765.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:06.238Z,1513262766.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:06.631Z,1513262766.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:07.041Z,1513262767.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:07.420Z,1513262767.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:07.819Z,1513262767.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:08.265Z,1513262768.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:08.615Z,1513262768.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:09.023Z,1513262769.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:09.420Z,1513262769.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:09.827Z,1513262769.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:10.217Z,1513262770.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:10.612Z,1513262770.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:11.023Z,1513262771.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:11.421Z,1513262771.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:11.702Z,1513262771.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:46:11.819Z,1513262771.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:12.216Z,1513262772.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:12.498Z,1513262772.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:46:12.621Z,1513262772.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:12.903Z,1513262772.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:46:13.022Z,1513262773.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:13.425Z,1513262773.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:13.870Z,1513262773.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:14.230Z,1513262774.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:14.683Z,1513262774.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.030Z,1513262775.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.430Z,1513262775.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.851Z,1513262775.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.851Z,1513262775.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 284
2017-12-14T14:46:15.851Z,1513262775.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:46:15.852Z,1513262775.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.853Z,1513262775.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 284
2017-12-14T14:46:15.853Z,1513262775.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:46:15.855Z,1513262775.855 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:15.855Z,1513262775.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 284
2017-12-14T14:46:15.855Z,1513262775.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:46:15.866Z,1513262775.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:46:15.867Z,1513262775.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:46:15.867Z,1513262775.867 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:46:16.262Z,1513262776.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:46:16.262Z,1513262776.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 284
2017-12-14T14:46:16.263Z,1513262776.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:46:16.263Z,1513262776.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 284
2017-12-14T14:46:16.263Z,1513262776.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:46:16.263Z,1513262776.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 284
2017-12-14T14:46:16.622Z,1513262776.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:46:16.623Z,1513262776.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:46:16.623Z,1513262776.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:46:16.623Z,1513262776.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:46:16.624Z,1513262776.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:46:16.624Z,1513262776.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:46:16.625Z,1513262776.625 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:46:16.625Z,1513262776.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:46:16.625Z,1513262776.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:46:17.030Z,1513262777.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:17.486Z,1513262777.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:17.841Z,1513262777.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:18.243Z,1513262778.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:18.640Z,1513262778.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:19.027Z,1513262779.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:19.467Z,1513262779.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:19.831Z,1513262779.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:20.234Z,1513262780.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:20.631Z,1513262780.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:21.034Z,1513262781.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:21.432Z,1513262781.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:21.835Z,1513262781.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:22.266Z,1513262782.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:22.626Z,1513262782.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:23.070Z,1513262783.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:23.427Z,1513262783.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:23.827Z,1513262783.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:24.224Z,1513262784.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:24.620Z,1513262784.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:25.055Z,1513262785.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:25.431Z,1513262785.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:25.828Z,1513262785.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:26.208Z,1513262786.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:26.607Z,1513262786.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:27.087Z,1513262787.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:27.436Z,1513262787.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:27.834Z,1513262787.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:28.260Z,1513262788.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:28.611Z,1513262788.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:29.043Z,1513262789.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:29.429Z,1513262789.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:29.855Z,1513262789.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:30.215Z,1513262790.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:30.611Z,1513262790.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:31.020Z,1513262791.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:31.474Z,1513262791.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:31.928Z,1513262791.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:32.219Z,1513262792.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:32.676Z,1513262792.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:33.068Z,1513262793.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:33.443Z,1513262793.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:33.863Z,1513262793.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:34.231Z,1513262794.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:34.631Z,1513262794.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:35.031Z,1513262795.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:35.444Z,1513262795.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:35.866Z,1513262795.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:36.312Z,1513262796.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:41.093Z,1513262801.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:41.303Z,1513262801.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:41.687Z,1513262801.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:42.063Z,1513262802.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:42.492Z,1513262802.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:42.839Z,1513262802.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:43.251Z,1513262803.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:43.663Z,1513262803.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:44.161Z,1513262804.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:44.473Z,1513262804.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:44.852Z,1513262804.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:45.244Z,1513262805.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:45.635Z,1513262805.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:46.052Z,1513262806.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:46.470Z,1513262806.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:46.866Z,1513262806.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:47.256Z,1513262807.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:47.647Z,1513262807.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:48.168Z,1513262808.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:48.468Z,1513262808.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:48.870Z,1513262808.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:49.287Z,1513262809.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:49.635Z,1513262809.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:50.098Z,1513262810.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:50.452Z,1513262810.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:50.926Z,1513262810.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:51.251Z,1513262811.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:51.659Z,1513262811.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:52.062Z,1513262812.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:52.563Z,1513262812.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:52.882Z,1513262812.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:53.253Z,1513262813.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:53.670Z,1513262813.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:54.097Z,1513262814.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:54.558Z,1513262814.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:54.867Z,1513262814.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:55.267Z,1513262815.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:55.639Z,1513262815.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:56.053Z,1513262816.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:56.463Z,1513262816.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:56.917Z,1513262816.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:57.273Z,1513262817.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:57.662Z,1513262817.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:58.055Z,1513262818.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:58.448Z,1513262818.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:58.885Z,1513262818.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:59.239Z,1513262819.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:46:59.637Z,1513262819.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:00.055Z,1513262820.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:00.453Z,1513262820.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:00.844Z,1513262820.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:01.259Z,1513262821.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:01.643Z,1513262821.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:02.048Z,1513262822.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:02.507Z,1513262822.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:02.855Z,1513262822.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:03.245Z,1513262823.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:03.710Z,1513262823.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:04.048Z,1513262824.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:04.479Z,1513262824.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:04.859Z,1513262824.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:05.250Z,1513262825.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:05.636Z,1513262825.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:06.053Z,1513262826.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:06.539Z,1513262826.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:06.899Z,1513262826.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:07.306Z,1513262827.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:07.636Z,1513262827.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:08.048Z,1513262828.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:08.516Z,1513262828.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:08.867Z,1513262828.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:09.235Z,1513262829.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:09.643Z,1513262829.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:09.701Z,1513262829.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:47:10.154Z,1513262830.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:10.462Z,1513262830.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:10.499Z,1513262830.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:47:10.868Z,1513262830.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:11.236Z,1513262831.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:11.633Z,1513262831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:12.038Z,1513262832.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:12.451Z,1513262832.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:12.875Z,1513262832.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:13.241Z,1513262833.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:13.636Z,1513262833.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:14.045Z,1513262834.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:14.510Z,1513262834.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:14.855Z,1513262834.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:15.237Z,1513262835.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:15.628Z,1513262835.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:16.064Z,1513262836.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:16.531Z,1513262836.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:16.863Z,1513262836.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:17.239Z,1513262837.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:17.636Z,1513262837.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:18.060Z,1513262838.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:18.440Z,1513262838.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:18.845Z,1513262838.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:19.248Z,1513262839.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:19.688Z,1513262839.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:20.056Z,1513262840.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:20.508Z,1513262840.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:20.869Z,1513262840.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:21.256Z,1513262841.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:21.632Z,1513262841.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:22.063Z,1513262842.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:22.500Z,1513262842.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:22.877Z,1513262842.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:23.235Z,1513262843.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:23.639Z,1513262843.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:24.132Z,1513262844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:24.536Z,1513262844.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:24.871Z,1513262844.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:25.252Z,1513262845.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:25.639Z,1513262845.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:26.155Z,1513262846.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:26.496Z,1513262846.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:26.853Z,1513262846.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:27.251Z,1513262847.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:27.625Z,1513262847.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:28.052Z,1513262848.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:28.447Z,1513262848.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:28.847Z,1513262848.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:29.242Z,1513262849.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:29.644Z,1513262849.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:30.050Z,1513262850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:30.458Z,1513262850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:30.845Z,1513262850.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:31.245Z,1513262851.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:31.644Z,1513262851.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:32.049Z,1513262852.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:32.541Z,1513262852.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:32.863Z,1513262852.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:33.244Z,1513262853.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:33.622Z,1513262853.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:34.048Z,1513262854.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:34.523Z,1513262854.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:34.851Z,1513262854.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:35.230Z,1513262855.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:35.675Z,1513262855.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:36.051Z,1513262856.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:36.526Z,1513262856.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:39.874Z,1513262859.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:40.014Z,1513262860.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:40.364Z,1513262860.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:40.742Z,1513262860.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:41.147Z,1513262861.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:41.546Z,1513262861.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:41.946Z,1513262861.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:42.371Z,1513262862.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:42.770Z,1513262862.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:43.175Z,1513262863.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:43.552Z,1513262863.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:43.946Z,1513262863.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:44.352Z,1513262864.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:44.754Z,1513262864.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:45.182Z,1513262865.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:45.563Z,1513262865.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:45.968Z,1513262865.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:46.360Z,1513262866.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:46.772Z,1513262866.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:47.156Z,1513262867.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:47.576Z,1513262867.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:47.950Z,1513262867.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:48.510Z,1513262868.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:48.771Z,1513262868.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:49.211Z,1513262869.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:49.568Z,1513262869.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:49.946Z,1513262869.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:50.348Z,1513262870.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:50.773Z,1513262870.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:51.176Z,1513262871.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:51.583Z,1513262871.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:51.949Z,1513262871.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:52.352Z,1513262872.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:52.747Z,1513262872.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:53.148Z,1513262873.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:53.550Z,1513262873.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:53.949Z,1513262873.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:54.352Z,1513262874.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:54.800Z,1513262874.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:55.160Z,1513262875.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:55.551Z,1513262875.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:56.006Z,1513262876.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:56.346Z,1513262876.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:56.756Z,1513262876.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:57.167Z,1513262877.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:57.585Z,1513262877.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:57.997Z,1513262877.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:58.366Z,1513262878.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:58.765Z,1513262878.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:59.163Z,1513262879.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:59.543Z,1513262879.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:47:59.942Z,1513262879.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:00.371Z,1513262880.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:00.771Z,1513262880.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:01.159Z,1513262881.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:01.544Z,1513262881.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:01.944Z,1513262881.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:02.347Z,1513262882.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:02.747Z,1513262882.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:03.174Z,1513262883.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:03.575Z,1513262883.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:03.971Z,1513262883.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:04.387Z,1513262884.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:04.751Z,1513262884.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:05.152Z,1513262885.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:05.554Z,1513262885.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:06.021Z,1513262886.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:06.369Z,1513262886.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:06.771Z,1513262886.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:07.163Z,1513262887.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:07.552Z,1513262887.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:07.967Z,1513262887.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:08.365Z,1513262888.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:08.758Z,1513262888.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:09.164Z,1513262889.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:09.621Z,1513262889.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:09.965Z,1513262889.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:10.356Z,1513262890.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:10.779Z,1513262890.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:11.139Z,1513262891.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:11.583Z,1513262891.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:11.966Z,1513262891.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:12.356Z,1513262892.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:12.771Z,1513262892.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:13.165Z,1513262893.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:13.548Z,1513262893.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:13.947Z,1513262893.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:14.347Z,1513262894.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:14.748Z,1513262894.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:15.176Z,1513262895.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:15.569Z,1513262895.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:15.950Z,1513262895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:16.346Z,1513262896.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:16.751Z,1513262896.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:17.148Z,1513262897.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:17.590Z,1513262897.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:17.947Z,1513262897.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:18.382Z,1513262898.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:18.760Z,1513262898.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:19.156Z,1513262899.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:19.551Z,1513262899.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:19.994Z,1513262899.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:20.348Z,1513262900.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:20.795Z,1513262900.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:21.157Z,1513262901.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:21.561Z,1513262901.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:21.964Z,1513262901.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:22.364Z,1513262902.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:22.760Z,1513262902.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:23.153Z,1513262903.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:23.555Z,1513262903.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:23.972Z,1513262903.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:24.359Z,1513262904.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:24.765Z,1513262904.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:25.160Z,1513262905.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:25.551Z,1513262905.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:25.954Z,1513262905.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:26.362Z,1513262906.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:26.757Z,1513262906.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:27.171Z,1513262907.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:27.567Z,1513262907.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:27.971Z,1513262907.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:28.367Z,1513262908.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:28.760Z,1513262908.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:29.144Z,1513262909.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:29.544Z,1513262909.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:29.943Z,1513262909.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:30.499Z,1513262910.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:30.771Z,1513262910.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:31.171Z,1513262911.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:31.543Z,1513262911.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:31.976Z,1513262911.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:32.343Z,1513262912.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:32.748Z,1513262912.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:33.185Z,1513262913.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:33.552Z,1513262913.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:33.983Z,1513262913.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:34.347Z,1513262914.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:34.748Z,1513262914.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:35.148Z,1513262915.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:35.547Z,1513262915.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:35.946Z,1513262915.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:36.349Z,1513262916.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:36.799Z,1513262916.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:40.344Z,1513262920.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:40.501Z,1513262920.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:40.831Z,1513262920.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:41.236Z,1513262921.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:41.606Z,1513262921.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:42.074Z,1513262922.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:42.427Z,1513262922.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:42.827Z,1513262922.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:43.252Z,1513262923.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:43.623Z,1513262923.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:43.978Z,1513262923.978 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:48:43.978Z,1513262923.978 [NAL9602] Data Fault, FailCount= 3
2017-12-14T14:48:43.978Z,1513262923.978 [NAL9602](ERROR): Data Fault
2017-12-14T14:48:44.029Z,1513262924.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:44.051Z,1513262924.051 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:48:44.374Z,1513262924.374 [NAL9602](INFO): Powering down
2017-12-14T14:48:44.487Z,1513262924.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:44.823Z,1513262924.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:45.218Z,1513262925.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:45.247Z,1513262925.247 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:48:45.247Z,1513262925.247 [NAL9602] No Fault, FailCount= 3
2017-12-14T14:48:45.616Z,1513262925.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:46.014Z,1513262926.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:46.508Z,1513262926.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:46.817Z,1513262926.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:47.216Z,1513262927.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:47.614Z,1513262927.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:48.021Z,1513262928.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:48.421Z,1513262928.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:48.820Z,1513262928.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:49.225Z,1513262929.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:49.623Z,1513262929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:50.025Z,1513262930.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:50.431Z,1513262930.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:50.831Z,1513262930.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:51.205Z,1513262931.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:51.607Z,1513262931.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:52.010Z,1513262932.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:52.434Z,1513262932.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:52.879Z,1513262932.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:53.219Z,1513262933.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:53.621Z,1513262933.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:54.036Z,1513262934.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:54.413Z,1513262934.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:54.812Z,1513262934.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:55.242Z,1513262935.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:55.615Z,1513262935.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:56.059Z,1513262936.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:56.423Z,1513262936.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:56.823Z,1513262936.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:57.216Z,1513262937.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:57.616Z,1513262937.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:58.017Z,1513262938.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:58.411Z,1513262938.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:58.826Z,1513262938.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:59.223Z,1513262939.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:48:59.625Z,1513262939.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:00.012Z,1513262940.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:00.411Z,1513262940.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:00.814Z,1513262940.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:01.222Z,1513262941.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:01.614Z,1513262941.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:02.013Z,1513262942.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:02.512Z,1513262942.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:02.827Z,1513262942.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:03.220Z,1513262943.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:03.620Z,1513262943.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:04.023Z,1513262944.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:04.447Z,1513262944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:04.825Z,1513262944.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:05.225Z,1513262945.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:05.643Z,1513262945.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:06.034Z,1513262946.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:06.408Z,1513262946.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:06.809Z,1513262946.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:07.211Z,1513262947.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:07.606Z,1513262947.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:08.015Z,1513262948.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:08.413Z,1513262948.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:08.879Z,1513262948.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:09.223Z,1513262949.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:09.617Z,1513262949.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:10.022Z,1513262950.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:10.416Z,1513262950.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:10.828Z,1513262950.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:11.213Z,1513262951.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:11.619Z,1513262951.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:12.026Z,1513262952.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:12.505Z,1513262952.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:12.819Z,1513262952.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:13.220Z,1513262953.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:13.622Z,1513262953.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:14.020Z,1513262954.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:14.418Z,1513262954.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:14.774Z,1513262954.774 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:49:14.807Z,1513262954.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:15.274Z,1513262955.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:15.630Z,1513262955.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.012Z,1513262956.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.484Z,1513262956.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.902Z,1513262956.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.902Z,1513262956.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 285
2017-12-14T14:49:16.903Z,1513262956.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:49:16.904Z,1513262956.904 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.941Z,1513262956.941 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 285
2017-12-14T14:49:16.941Z,1513262956.941 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:49:16.943Z,1513262956.943 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:16.943Z,1513262956.943 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 285
2017-12-14T14:49:16.943Z,1513262956.943 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:49:16.998Z,1513262956.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:49:16.998Z,1513262956.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:49:16.999Z,1513262956.999 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:49:17.220Z,1513262957.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:49:17.220Z,1513262957.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 285
2017-12-14T14:49:17.237Z,1513262957.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:49:17.237Z,1513262957.237 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 285
2017-12-14T14:49:17.237Z,1513262957.237 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:49:17.237Z,1513262957.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 285
2017-12-14T14:49:17.649Z,1513262957.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:49:17.650Z,1513262957.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:49:17.650Z,1513262957.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:49:17.650Z,1513262957.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:49:17.651Z,1513262957.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:49:17.651Z,1513262957.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:49:17.651Z,1513262957.651 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:49:17.652Z,1513262957.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:49:17.652Z,1513262957.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:49:18.027Z,1513262958.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:18.476Z,1513262958.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:18.815Z,1513262958.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:19.221Z,1513262959.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:19.619Z,1513262959.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:20.018Z,1513262960.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:20.419Z,1513262960.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:20.819Z,1513262960.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:21.225Z,1513262961.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:21.680Z,1513262961.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:22.029Z,1513262962.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:22.422Z,1513262962.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:22.440Z,1513262962.440 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:49:22.828Z,1513262962.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:23.204Z,1513262963.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:23.611Z,1513262963.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:24.038Z,1513262964.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:24.414Z,1513262964.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:24.815Z,1513262964.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:25.242Z,1513262965.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:25.578Z,1513262965.578 [NAL9602](INFO): NAL9602 initialized
2017-12-14T14:49:25.625Z,1513262965.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:26.015Z,1513262966.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:26.416Z,1513262966.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:26.866Z,1513262966.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:27.226Z,1513262967.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:27.620Z,1513262967.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:28.048Z,1513262968.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:28.504Z,1513262968.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:28.832Z,1513262968.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:29.239Z,1513262969.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:29.628Z,1513262969.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:30.029Z,1513262970.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:30.432Z,1513262970.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:30.814Z,1513262970.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:31.282Z,1513262971.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:31.621Z,1513262971.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:32.018Z,1513262972.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:32.432Z,1513262972.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:32.839Z,1513262972.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:33.231Z,1513262973.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:33.611Z,1513262973.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:34.031Z,1513262974.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:34.467Z,1513262974.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:34.823Z,1513262974.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:35.227Z,1513262975.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:35.625Z,1513262975.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:36.031Z,1513262976.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:36.425Z,1513262976.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:36.824Z,1513262976.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:40.418Z,1513262980.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:40.591Z,1513262980.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:40.991Z,1513262980.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:41.435Z,1513262981.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:41.791Z,1513262981.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:42.211Z,1513262982.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:42.591Z,1513262982.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:42.991Z,1513262982.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:43.396Z,1513262983.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:43.798Z,1513262983.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:44.208Z,1513262984.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:44.593Z,1513262984.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:44.972Z,1513262984.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:45.374Z,1513262985.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:45.771Z,1513262985.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:46.212Z,1513262986.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:46.580Z,1513262986.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:46.972Z,1513262986.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:47.375Z,1513262987.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:47.770Z,1513262987.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:48.209Z,1513262988.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:48.579Z,1513262988.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:48.973Z,1513262988.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:49.379Z,1513262989.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:49.791Z,1513262989.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:50.271Z,1513262990.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:50.576Z,1513262990.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:50.974Z,1513262990.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:51.371Z,1513262991.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:51.778Z,1513262991.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:52.259Z,1513262992.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:52.590Z,1513262992.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:52.989Z,1513262992.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:53.367Z,1513262993.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:53.779Z,1513262993.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:54.171Z,1513262994.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:54.583Z,1513262994.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:54.975Z,1513262994.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:55.380Z,1513262995.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:55.787Z,1513262995.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:56.181Z,1513262996.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:56.623Z,1513262996.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:56.984Z,1513262996.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:57.376Z,1513262997.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:57.787Z,1513262997.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:58.199Z,1513262998.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:58.595Z,1513262998.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:58.991Z,1513262998.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:59.379Z,1513262999.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:49:59.793Z,1513262999.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:00.208Z,1513263000.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:00.575Z,1513263000.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:00.973Z,1513263000.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:01.397Z,1513263001.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:01.799Z,1513263001.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:02.282Z,1513263002.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:02.571Z,1513263002.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:03.020Z,1513263003.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:03.414Z,1513263003.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:03.773Z,1513263003.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:04.260Z,1513263004.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:04.605Z,1513263004.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:04.989Z,1513263004.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:05.386Z,1513263005.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:05.783Z,1513263005.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:06.238Z,1513263006.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:06.575Z,1513263006.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:06.979Z,1513263006.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:07.379Z,1513263007.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:07.781Z,1513263007.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:08.187Z,1513263008.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:08.583Z,1513263008.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:08.974Z,1513263008.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:09.370Z,1513263009.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:09.783Z,1513263009.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:10.181Z,1513263010.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:10.597Z,1513263010.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:10.986Z,1513263010.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:11.371Z,1513263011.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:11.779Z,1513263011.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:12.204Z,1513263012.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:12.675Z,1513263012.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:12.976Z,1513263012.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:13.390Z,1513263013.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:13.789Z,1513263013.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:14.204Z,1513263014.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:14.579Z,1513263014.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:14.977Z,1513263014.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:15.377Z,1513263015.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:15.838Z,1513263015.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:16.230Z,1513263016.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:16.582Z,1513263016.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:16.983Z,1513263016.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:17.383Z,1513263017.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:17.782Z,1513263017.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:18.191Z,1513263018.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:18.578Z,1513263018.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:19.041Z,1513263019.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:19.395Z,1513263019.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:19.799Z,1513263019.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:20.255Z,1513263020.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:20.574Z,1513263020.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:20.971Z,1513263020.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:21.372Z,1513263021.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:21.772Z,1513263021.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:22.247Z,1513263022.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:22.592Z,1513263022.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:22.988Z,1513263022.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:23.379Z,1513263023.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:23.787Z,1513263023.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:24.175Z,1513263024.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:24.607Z,1513263024.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:25.003Z,1513263025.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:25.445Z,1513263025.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:25.791Z,1513263025.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:26.207Z,1513263026.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:26.607Z,1513263026.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:26.990Z,1513263026.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:27.467Z,1513263027.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:27.786Z,1513263027.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:28.217Z,1513263028.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:28.608Z,1513263028.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:28.992Z,1513263028.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:29.367Z,1513263029.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:29.785Z,1513263029.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:30.203Z,1513263030.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:30.574Z,1513263030.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:30.975Z,1513263030.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:31.387Z,1513263031.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:31.859Z,1513263031.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:32.215Z,1513263032.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:32.583Z,1513263032.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:32.975Z,1513263032.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:33.372Z,1513263033.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:33.787Z,1513263033.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:34.237Z,1513263034.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:34.585Z,1513263034.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:34.995Z,1513263034.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:35.383Z,1513263035.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:35.807Z,1513263035.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:36.179Z,1513263036.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:36.182Z,1513263036.182 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T14:50:36.182Z,1513263036.182 [Default:CheckIn:C.Wait] Stopped
2017-12-14T14:50:36.182Z,1513263036.182 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T14:50:36.183Z,1513263036.183 [Default:CheckIn:D] Running Loop=1
2017-12-14T14:50:36.588Z,1513263036.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:36.592Z,1513263036.592 [Default:CheckIn:D] Stopped
2017-12-14T14:50:36.592Z,1513263036.592 [Default:CheckIn:E] Running Loop=1
2017-12-14T14:50:36.979Z,1513263036.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 857.353385 min 
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn:E] Stopped
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn] Stopped
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn](INFO): Running loop #83
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn] Running Loop=83
2017-12-14T14:50:36.983Z,1513263036.983 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T14:50:36.984Z,1513263036.984 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T14:50:40.540Z,1513263040.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:40.691Z,1513263040.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:41.036Z,1513263041.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:41.454Z,1513263041.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:41.818Z,1513263041.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:42.219Z,1513263042.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:42.616Z,1513263042.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:43.013Z,1513263043.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:43.428Z,1513263043.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:43.820Z,1513263043.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:44.221Z,1513263044.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:44.627Z,1513263044.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:45.021Z,1513263045.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:45.416Z,1513263045.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:45.812Z,1513263045.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:46.224Z,1513263046.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:46.626Z,1513263046.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:47.025Z,1513263047.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:47.475Z,1513263047.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:47.903Z,1513263047.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:48.276Z,1513263048.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:48.642Z,1513263048.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:49.028Z,1513263049.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:49.459Z,1513263049.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:49.834Z,1513263049.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:50.233Z,1513263050.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:50.611Z,1513263050.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:51.083Z,1513263051.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:51.444Z,1513263051.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:51.835Z,1513263051.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:52.207Z,1513263052.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:52.614Z,1513263052.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:53.011Z,1513263053.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:53.420Z,1513263053.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:53.819Z,1513263053.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:54.249Z,1513263054.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:54.624Z,1513263054.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:55.014Z,1513263055.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:55.414Z,1513263055.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:55.815Z,1513263055.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:56.223Z,1513263056.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:56.650Z,1513263056.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:57.028Z,1513263057.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:57.449Z,1513263057.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:57.849Z,1513263057.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:58.214Z,1513263058.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:58.619Z,1513263058.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:59.019Z,1513263059.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:59.423Z,1513263059.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:50:59.827Z,1513263059.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:00.227Z,1513263060.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:00.640Z,1513263060.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:01.023Z,1513263061.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:01.407Z,1513263061.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:01.805Z,1513263061.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:02.276Z,1513263062.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:02.627Z,1513263062.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:03.039Z,1513263063.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:03.403Z,1513263063.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:03.859Z,1513263063.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:04.221Z,1513263064.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:04.613Z,1513263064.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:05.016Z,1513263065.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:05.428Z,1513263065.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:05.824Z,1513263065.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:06.227Z,1513263066.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:06.617Z,1513263066.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:07.078Z,1513263067.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:07.419Z,1513263067.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:07.817Z,1513263067.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:08.248Z,1513263068.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:08.624Z,1513263068.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:09.026Z,1513263069.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:09.422Z,1513263069.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:09.843Z,1513263069.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:10.248Z,1513263070.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:10.624Z,1513263070.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:11.056Z,1513263071.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:11.424Z,1513263071.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:11.855Z,1513263071.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:12.226Z,1513263072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:12.613Z,1513263072.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:13.015Z,1513263073.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:13.463Z,1513263073.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:13.829Z,1513263073.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:14.221Z,1513263074.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:14.622Z,1513263074.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:15.015Z,1513263075.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:15.418Z,1513263075.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:15.814Z,1513263075.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:16.263Z,1513263076.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:16.667Z,1513263076.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:17.023Z,1513263077.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:17.424Z,1513263077.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:17.829Z,1513263077.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:18.235Z,1513263078.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:18.640Z,1513263078.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:19.032Z,1513263079.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:19.447Z,1513263079.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:19.915Z,1513263079.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:20.253Z,1513263080.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:20.626Z,1513263080.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:21.082Z,1513263081.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:21.427Z,1513263081.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:21.832Z,1513263081.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:22.269Z,1513263082.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:22.640Z,1513263082.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:23.071Z,1513263083.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:23.455Z,1513263083.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:23.854Z,1513263083.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:24.256Z,1513263084.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:24.653Z,1513263084.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:25.039Z,1513263085.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:25.456Z,1513263085.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:25.861Z,1513263085.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:26.234Z,1513263086.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:26.636Z,1513263086.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:27.035Z,1513263087.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:27.447Z,1513263087.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:27.811Z,1513263087.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:28.279Z,1513263088.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:28.633Z,1513263088.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:29.032Z,1513263089.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:29.464Z,1513263089.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:29.844Z,1513263089.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:30.299Z,1513263090.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:30.694Z,1513263090.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:31.036Z,1513263091.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:31.435Z,1513263091.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:31.885Z,1513263091.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:32.222Z,1513263092.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:32.631Z,1513263092.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:33.086Z,1513263093.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:33.431Z,1513263093.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:33.883Z,1513263093.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:34.239Z,1513263094.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:34.638Z,1513263094.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:35.077Z,1513263095.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:35.446Z,1513263095.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:35.834Z,1513263095.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:36.247Z,1513263096.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:36.661Z,1513263096.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:37.043Z,1513263097.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:43.820Z,1513263103.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:43.993Z,1513263103.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:44.371Z,1513263104.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:44.748Z,1513263104.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:45.151Z,1513263105.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:45.578Z,1513263105.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:45.991Z,1513263105.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:46.328Z,1513263106.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:46.766Z,1513263106.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:47.167Z,1513263107.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:47.538Z,1513263107.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:47.963Z,1513263107.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:48.343Z,1513263108.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:48.744Z,1513263108.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:49.151Z,1513263109.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:49.559Z,1513263109.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:49.972Z,1513263109.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:50.363Z,1513263110.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:50.751Z,1513263110.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:51.152Z,1513263111.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:51.523Z,1513263111.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:51.921Z,1513263111.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:52.348Z,1513263112.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:52.767Z,1513263112.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:53.152Z,1513263113.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:53.551Z,1513263113.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:53.931Z,1513263113.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:54.323Z,1513263114.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:54.747Z,1513263114.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:55.119Z,1513263115.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:55.518Z,1513263115.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:55.971Z,1513263115.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:56.359Z,1513263116.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:56.733Z,1513263116.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:57.203Z,1513263117.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:57.518Z,1513263117.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:57.943Z,1513263117.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:58.323Z,1513263118.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:58.719Z,1513263118.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:59.143Z,1513263119.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:59.537Z,1513263119.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:51:59.935Z,1513263119.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:00.321Z,1513263120.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:00.759Z,1513263120.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:01.119Z,1513263121.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:01.523Z,1513263121.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:01.924Z,1513263121.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:02.337Z,1513263122.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:02.735Z,1513263122.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:03.132Z,1513263123.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:03.527Z,1513263123.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:03.919Z,1513263123.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:04.363Z,1513263124.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:04.719Z,1513263124.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:05.171Z,1513263125.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:05.532Z,1513263125.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:05.932Z,1513263125.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:06.344Z,1513263126.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:06.721Z,1513263126.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:07.136Z,1513263127.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:07.522Z,1513263127.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:07.920Z,1513263127.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:08.347Z,1513263128.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:08.736Z,1513263128.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:09.136Z,1513263129.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:09.519Z,1513263129.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:09.915Z,1513263129.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:10.323Z,1513263130.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:10.727Z,1513263130.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:11.132Z,1513263131.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:11.567Z,1513263131.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:11.932Z,1513263131.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:12.317Z,1513263132.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:12.718Z,1513263132.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:13.120Z,1513263133.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:13.521Z,1513263133.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:13.921Z,1513263133.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:14.335Z,1513263134.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:14.747Z,1513263134.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:15.143Z,1513263135.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:15.531Z,1513263135.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:15.932Z,1513263135.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:16.335Z,1513263136.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:16.751Z,1513263136.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.136Z,1513263137.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.540Z,1513263137.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.959Z,1513263137.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.959Z,1513263137.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 286
2017-12-14T14:52:17.959Z,1513263137.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:52:17.960Z,1513263137.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.969Z,1513263137.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 286
2017-12-14T14:52:17.969Z,1513263137.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:52:17.971Z,1513263137.971 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:17.971Z,1513263137.971 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 286
2017-12-14T14:52:17.971Z,1513263137.971 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:52:18.008Z,1513263138.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:52:18.008Z,1513263138.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:52:18.008Z,1513263138.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:52:18.366Z,1513263138.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:52:18.366Z,1513263138.366 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 286
2017-12-14T14:52:18.366Z,1513263138.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:52:18.366Z,1513263138.366 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 286
2017-12-14T14:52:18.367Z,1513263138.367 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:52:18.367Z,1513263138.367 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 286
2017-12-14T14:52:18.755Z,1513263138.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:52:18.755Z,1513263138.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:52:18.756Z,1513263138.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:52:18.756Z,1513263138.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:52:18.761Z,1513263138.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:52:18.761Z,1513263138.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:52:18.762Z,1513263138.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:52:18.762Z,1513263138.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:52:18.762Z,1513263138.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:52:19.127Z,1513263139.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:19.567Z,1513263139.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:19.927Z,1513263139.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:20.375Z,1513263140.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:20.755Z,1513263140.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:21.136Z,1513263141.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:21.527Z,1513263141.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:21.973Z,1513263141.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:22.324Z,1513263142.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:22.731Z,1513263142.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:23.132Z,1513263143.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:23.536Z,1513263143.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:23.939Z,1513263143.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:24.328Z,1513263144.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:24.731Z,1513263144.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:25.131Z,1513263145.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:25.531Z,1513263145.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:25.924Z,1513263145.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:26.337Z,1513263146.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:26.736Z,1513263146.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:27.140Z,1513263147.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:27.547Z,1513263147.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:27.927Z,1513263147.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:28.484Z,1513263148.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:28.731Z,1513263148.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:29.135Z,1513263149.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:29.546Z,1513263149.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:29.946Z,1513263149.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:30.338Z,1513263150.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:30.762Z,1513263150.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:31.134Z,1513263151.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:31.519Z,1513263151.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:31.951Z,1513263151.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:32.345Z,1513263152.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:32.751Z,1513263152.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:33.144Z,1513263153.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:33.528Z,1513263153.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:34.010Z,1513263154.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:34.328Z,1513263154.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:34.727Z,1513263154.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:35.155Z,1513263155.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:35.553Z,1513263155.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:35.961Z,1513263155.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:36.327Z,1513263156.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:36.731Z,1513263156.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:37.133Z,1513263157.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:40.803Z,1513263160.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:40.929Z,1513263160.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:41.311Z,1513263161.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:41.723Z,1513263161.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:42.111Z,1513263162.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:42.570Z,1513263162.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:42.881Z,1513263162.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:43.307Z,1513263163.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:43.690Z,1513263163.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:44.091Z,1513263164.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:44.558Z,1513263164.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:44.914Z,1513263164.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:45.275Z,1513263165.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:45.685Z,1513263165.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:46.195Z,1513263166.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:46.507Z,1513263166.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:46.895Z,1513263166.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:47.342Z,1513263167.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:47.682Z,1513263167.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:48.162Z,1513263168.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:48.518Z,1513263168.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:48.893Z,1513263168.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:49.282Z,1513263169.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:49.688Z,1513263169.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:50.154Z,1513263170.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:50.553Z,1513263170.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:50.931Z,1513263170.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:51.283Z,1513263171.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:51.691Z,1513263171.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:52.168Z,1513263172.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:52.504Z,1513263172.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:52.907Z,1513263172.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:53.283Z,1513263173.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:53.718Z,1513263173.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:54.084Z,1513263174.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:54.521Z,1513263174.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:54.897Z,1513263174.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:55.286Z,1513263175.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:55.688Z,1513263175.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:56.102Z,1513263176.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:56.538Z,1513263176.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:56.941Z,1513263176.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:57.296Z,1513263177.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:57.704Z,1513263177.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:58.076Z,1513263178.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:58.578Z,1513263178.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:58.884Z,1513263178.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:59.308Z,1513263179.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:52:59.706Z,1513263179.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:00.167Z,1513263180.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:00.483Z,1513263180.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:00.889Z,1513263180.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:01.286Z,1513263181.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:01.684Z,1513263181.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:02.184Z,1513263182.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:02.511Z,1513263182.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:02.894Z,1513263182.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:03.348Z,1513263183.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:03.691Z,1513263183.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:04.163Z,1513263184.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:04.544Z,1513263184.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:04.900Z,1513263184.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:05.280Z,1513263185.280 [PNI_TCM](ERROR): CRC does not match. Expected:0x26169 got:0x16897
2017-12-14T14:53:05.331Z,1513263185.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:05.688Z,1513263185.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:06.164Z,1513263186.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:06.543Z,1513263186.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:06.899Z,1513263186.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:07.304Z,1513263187.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:07.671Z,1513263187.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:08.104Z,1513263188.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:08.483Z,1513263188.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:08.887Z,1513263188.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:09.284Z,1513263189.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:09.689Z,1513263189.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:10.118Z,1513263190.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:10.543Z,1513263190.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:10.884Z,1513263190.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:11.287Z,1513263191.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:11.687Z,1513263191.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:12.116Z,1513263192.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:12.540Z,1513263192.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:12.891Z,1513263192.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:13.288Z,1513263193.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:13.727Z,1513263193.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:14.117Z,1513263194.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:14.495Z,1513263194.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:14.892Z,1513263194.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:15.288Z,1513263195.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:15.692Z,1513263195.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:16.177Z,1513263196.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:16.531Z,1513263196.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:16.899Z,1513263196.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:17.266Z,1513263197.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:17.665Z,1513263197.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:18.160Z,1513263198.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:18.525Z,1513263198.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:18.892Z,1513263198.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:19.290Z,1513263199.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:19.701Z,1513263199.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:20.174Z,1513263200.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:20.509Z,1513263200.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:20.892Z,1513263200.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:21.284Z,1513263201.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:21.688Z,1513263201.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:22.095Z,1513263202.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:22.495Z,1513263202.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:22.948Z,1513263202.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:23.297Z,1513263203.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:23.690Z,1513263203.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:24.097Z,1513263204.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:24.568Z,1513263204.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:24.880Z,1513263204.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:25.352Z,1513263205.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:25.698Z,1513263205.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:26.175Z,1513263206.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:26.536Z,1513263206.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:26.896Z,1513263206.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:27.303Z,1513263207.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:27.683Z,1513263207.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:28.154Z,1513263208.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:28.558Z,1513263208.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:28.901Z,1513263208.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:29.315Z,1513263209.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:29.683Z,1513263209.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:30.113Z,1513263210.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:30.500Z,1513263210.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:30.896Z,1513263210.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:31.303Z,1513263211.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:31.691Z,1513263211.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:32.151Z,1513263212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:32.506Z,1513263212.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:32.909Z,1513263212.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:33.276Z,1513263213.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:33.676Z,1513263213.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:34.164Z,1513263214.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:34.510Z,1513263214.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:34.894Z,1513263214.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:35.292Z,1513263215.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:35.716Z,1513263215.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:36.109Z,1513263216.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:36.526Z,1513263216.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:36.892Z,1513263216.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:37.291Z,1513263217.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:40.871Z,1513263220.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:41.021Z,1513263221.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:41.352Z,1513263221.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:41.750Z,1513263221.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:42.224Z,1513263222.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:42.560Z,1513263222.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:42.956Z,1513263222.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:43.356Z,1513263223.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:43.758Z,1513263223.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:44.204Z,1513263224.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:44.559Z,1513263224.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:44.955Z,1513263224.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:45.414Z,1513263225.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:45.752Z,1513263225.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:46.222Z,1513263226.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:46.565Z,1513263226.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:46.959Z,1513263226.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:47.357Z,1513263227.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:47.780Z,1513263227.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:48.236Z,1513263228.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:48.574Z,1513263228.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:48.959Z,1513263228.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:49.410Z,1513263229.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:49.763Z,1513263229.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:50.235Z,1513263230.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:50.563Z,1513263230.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:50.979Z,1513263230.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:51.338Z,1513263231.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:51.794Z,1513263231.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:52.175Z,1513263232.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:52.573Z,1513263232.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:52.949Z,1513263232.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:53.345Z,1513263233.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:53.748Z,1513263233.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:54.147Z,1513263234.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:54.565Z,1513263234.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:54.997Z,1513263234.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:55.356Z,1513263235.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:55.757Z,1513263235.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:56.178Z,1513263236.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:56.547Z,1513263236.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:56.943Z,1513263236.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:57.343Z,1513263237.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:57.744Z,1513263237.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:58.232Z,1513263238.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:58.576Z,1513263238.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:58.944Z,1513263238.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:59.370Z,1513263239.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:53:59.744Z,1513263239.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:00.203Z,1513263240.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:00.552Z,1513263240.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:00.941Z,1513263240.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:01.348Z,1513263241.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:01.751Z,1513263241.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:02.200Z,1513263242.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:02.548Z,1513263242.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:02.942Z,1513263242.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:03.350Z,1513263243.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:03.744Z,1513263243.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:04.240Z,1513263244.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:04.559Z,1513263244.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:04.952Z,1513263244.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:05.336Z,1513263245.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:05.763Z,1513263245.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:06.139Z,1513263246.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:06.571Z,1513263246.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:06.944Z,1513263246.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:07.356Z,1513263247.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:07.664Z,1513263247.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:07.756Z,1513263247.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:08.227Z,1513263248.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:08.459Z,1513263248.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:08.559Z,1513263248.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:08.898Z,1513263248.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:08.959Z,1513263248.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:09.335Z,1513263249.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:09.695Z,1513263249.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:09.760Z,1513263249.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:10.215Z,1513263250.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:10.498Z,1513263250.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:10.571Z,1513263250.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:10.901Z,1513263250.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:11.010Z,1513263251.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:11.436Z,1513263251.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:11.697Z,1513263251.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:11.771Z,1513263251.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:12.212Z,1513263252.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:12.493Z,1513263252.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:12.587Z,1513263252.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:12.898Z,1513263252.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:12.967Z,1513263252.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:13.383Z,1513263253.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:13.694Z,1513263253.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:13.763Z,1513263253.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:14.218Z,1513263254.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:14.495Z,1513263254.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:14.579Z,1513263254.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:14.909Z,1513263254.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:14.944Z,1513263254.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:15.346Z,1513263255.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:15.705Z,1513263255.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:15.750Z,1513263255.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:16.203Z,1513263256.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:16.501Z,1513263256.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:16.563Z,1513263256.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:16.905Z,1513263256.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:16.961Z,1513263256.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:17.338Z,1513263257.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:17.702Z,1513263257.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:17.819Z,1513263257.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:18.219Z,1513263258.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:18.497Z,1513263258.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:18.548Z,1513263258.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:18.901Z,1513263258.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:18.947Z,1513263258.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:19.372Z,1513263259.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:19.771Z,1513263259.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:20.152Z,1513263260.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:20.574Z,1513263260.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:20.996Z,1513263260.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:21.343Z,1513263261.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:21.697Z,1513263261.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:21.783Z,1513263261.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:22.152Z,1513263262.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:22.495Z,1513263262.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:22.574Z,1513263262.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:22.901Z,1513263262.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:22.955Z,1513263262.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:23.349Z,1513263263.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:23.697Z,1513263263.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:23.755Z,1513263263.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:24.241Z,1513263264.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:24.493Z,1513263264.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:24.568Z,1513263264.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:24.897Z,1513263264.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:24.957Z,1513263264.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:25.367Z,1513263265.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:25.695Z,1513263265.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:25.775Z,1513263265.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:26.208Z,1513263266.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:26.501Z,1513263266.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:26.556Z,1513263266.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:26.908Z,1513263266.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:26.936Z,1513263266.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:27.412Z,1513263267.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:27.701Z,1513263267.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:27.750Z,1513263267.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:28.204Z,1513263268.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:28.498Z,1513263268.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:28.571Z,1513263268.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:28.901Z,1513263268.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:28.965Z,1513263268.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:29.349Z,1513263269.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:29.697Z,1513263269.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:29.756Z,1513263269.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:30.212Z,1513263270.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:30.494Z,1513263270.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:30.623Z,1513263270.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:30.901Z,1513263270.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:30.951Z,1513263270.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:31.355Z,1513263271.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:31.752Z,1513263271.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:32.228Z,1513263272.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:32.554Z,1513263272.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:32.946Z,1513263272.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:33.342Z,1513263273.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:33.863Z,1513263273.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:34.155Z,1513263274.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:34.595Z,1513263274.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:34.952Z,1513263274.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:35.379Z,1513263275.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:35.744Z,1513263275.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:36.151Z,1513263276.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:36.570Z,1513263276.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:36.947Z,1513263276.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:37.353Z,1513263277.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:39.697Z,1513263279.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:40.493Z,1513263280.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:40.897Z,1513263280.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:40.959Z,1513263280.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:41.103Z,1513263281.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:41.471Z,1513263281.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:41.695Z,1513263281.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:41.865Z,1513263281.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:42.260Z,1513263282.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:42.489Z,1513263282.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:42.657Z,1513263282.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:42.893Z,1513263282.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:43.064Z,1513263283.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:43.519Z,1513263283.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:43.691Z,1513263283.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:43.871Z,1513263283.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:44.267Z,1513263284.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:44.486Z,1513263284.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:44.668Z,1513263284.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:44.891Z,1513263284.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:45.079Z,1513263285.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:45.471Z,1513263285.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:45.871Z,1513263285.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:46.258Z,1513263286.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:46.701Z,1513263286.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:47.068Z,1513263287.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:47.470Z,1513263287.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:47.684Z,1513263287.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:47.872Z,1513263287.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:48.267Z,1513263288.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:48.480Z,1513263288.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:48.663Z,1513263288.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:48.893Z,1513263288.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:49.072Z,1513263289.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:49.472Z,1513263289.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:49.691Z,1513263289.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:49.868Z,1513263289.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:50.258Z,1513263290.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:50.488Z,1513263290.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:50.665Z,1513263290.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:50.893Z,1513263290.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:51.075Z,1513263291.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:51.472Z,1513263291.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:51.690Z,1513263291.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:51.870Z,1513263291.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:52.269Z,1513263292.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:52.488Z,1513263292.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:52.658Z,1513263292.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:52.895Z,1513263292.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:53.072Z,1513263293.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:53.479Z,1513263293.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:53.690Z,1513263293.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:53.872Z,1513263293.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:54.259Z,1513263294.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:54.488Z,1513263294.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:54.674Z,1513263294.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:54.897Z,1513263294.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:55.079Z,1513263295.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:55.526Z,1513263295.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:55.696Z,1513263295.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:55.888Z,1513263295.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:56.274Z,1513263296.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:56.490Z,1513263296.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:56.655Z,1513263296.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:56.893Z,1513263296.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:57.079Z,1513263297.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:57.503Z,1513263297.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:57.692Z,1513263297.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:57.872Z,1513263297.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:58.295Z,1513263298.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:58.485Z,1513263298.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:58.661Z,1513263298.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:58.890Z,1513263298.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:59.103Z,1513263299.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:59.487Z,1513263299.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:54:59.687Z,1513263299.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:54:59.886Z,1513263299.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:00.263Z,1513263300.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:00.481Z,1513263300.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:00.663Z,1513263300.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:00.885Z,1513263300.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:01.064Z,1513263301.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:01.465Z,1513263301.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:01.681Z,1513263301.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:01.868Z,1513263301.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:02.338Z,1513263302.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:02.486Z,1513263302.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:02.657Z,1513263302.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:02.890Z,1513263302.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:03.076Z,1513263303.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:03.464Z,1513263303.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:03.686Z,1513263303.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:03.871Z,1513263303.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:04.260Z,1513263304.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:04.484Z,1513263304.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:04.663Z,1513263304.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:04.893Z,1513263304.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:05.063Z,1513263305.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:05.523Z,1513263305.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:05.691Z,1513263305.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:05.863Z,1513263305.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:06.259Z,1513263306.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:06.488Z,1513263306.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:06.707Z,1513263306.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:06.893Z,1513263306.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:07.068Z,1513263307.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:07.476Z,1513263307.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:07.690Z,1513263307.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:07.879Z,1513263307.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:08.272Z,1513263308.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:08.488Z,1513263308.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:08.687Z,1513263308.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:08.895Z,1513263308.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:09.072Z,1513263309.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:09.472Z,1513263309.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:09.690Z,1513263309.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:09.879Z,1513263309.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:10.269Z,1513263310.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:10.485Z,1513263310.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:10.676Z,1513263310.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:10.889Z,1513263310.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:11.064Z,1513263311.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:11.471Z,1513263311.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:11.685Z,1513263311.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:11.966Z,1513263311.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:12.255Z,1513263312.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:12.483Z,1513263312.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:12.682Z,1513263312.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:12.889Z,1513263312.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:13.055Z,1513263313.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:13.478Z,1513263313.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:13.686Z,1513263313.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:13.856Z,1513263313.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:14.284Z,1513263314.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:14.481Z,1513263314.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:14.684Z,1513263314.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:14.885Z,1513263314.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:15.103Z,1513263315.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:15.463Z,1513263315.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:15.683Z,1513263315.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:15.861Z,1513263315.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:16.262Z,1513263316.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:16.479Z,1513263316.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:16.687Z,1513263316.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:16.885Z,1513263316.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:17.070Z,1513263317.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:17.470Z,1513263317.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:17.682Z,1513263317.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:17.871Z,1513263317.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:18.304Z,1513263318.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:18.483Z,1513263318.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:18.719Z,1513263318.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:18.889Z,1513263318.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:19.071Z,1513263319.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:19.071Z,1513263319.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 287
2017-12-14T14:55:19.071Z,1513263319.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:55:19.073Z,1513263319.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:19.073Z,1513263319.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 287
2017-12-14T14:55:19.073Z,1513263319.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:55:19.075Z,1513263319.075 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:19.075Z,1513263319.075 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 287
2017-12-14T14:55:19.075Z,1513263319.075 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:55:19.128Z,1513263319.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:55:19.128Z,1513263319.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:55:19.136Z,1513263319.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:55:19.520Z,1513263319.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:55:19.521Z,1513263319.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 287
2017-12-14T14:55:19.521Z,1513263319.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:55:19.521Z,1513263319.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 287
2017-12-14T14:55:19.522Z,1513263319.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:55:19.522Z,1513263319.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 287
2017-12-14T14:55:19.688Z,1513263319.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:19.867Z,1513263319.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:55:19.868Z,1513263319.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:55:19.868Z,1513263319.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:55:19.869Z,1513263319.869 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:55:19.870Z,1513263319.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:55:19.870Z,1513263319.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:55:19.871Z,1513263319.871 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:55:19.871Z,1513263319.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:55:19.871Z,1513263319.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:55:20.299Z,1513263320.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:20.485Z,1513263320.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:20.665Z,1513263320.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:20.901Z,1513263320.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:21.077Z,1513263321.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:21.476Z,1513263321.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:21.700Z,1513263321.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:21.871Z,1513263321.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:22.271Z,1513263322.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:22.493Z,1513263322.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:22.670Z,1513263322.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:22.900Z,1513263322.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:23.072Z,1513263323.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:23.478Z,1513263323.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:23.693Z,1513263323.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:23.873Z,1513263323.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:24.269Z,1513263324.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:24.489Z,1513263324.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:24.680Z,1513263324.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:24.895Z,1513263324.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:25.071Z,1513263325.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:25.468Z,1513263325.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:25.690Z,1513263325.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:25.864Z,1513263325.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:26.267Z,1513263326.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:26.485Z,1513263326.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:26.658Z,1513263326.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:26.889Z,1513263326.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:27.064Z,1513263327.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:27.463Z,1513263327.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:27.685Z,1513263327.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:27.948Z,1513263327.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:28.262Z,1513263328.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:28.483Z,1513263328.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:28.691Z,1513263328.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:28.889Z,1513263328.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:29.058Z,1513263329.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:29.460Z,1513263329.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:29.685Z,1513263329.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:29.859Z,1513263329.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:30.271Z,1513263330.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:30.483Z,1513263330.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:30.664Z,1513263330.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:30.889Z,1513263330.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:31.142Z,1513263331.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:31.462Z,1513263331.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:31.688Z,1513263331.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:31.857Z,1513263331.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:32.259Z,1513263332.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:32.483Z,1513263332.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:32.658Z,1513263332.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:32.890Z,1513263332.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:33.091Z,1513263333.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:33.463Z,1513263333.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:33.685Z,1513263333.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:33.863Z,1513263333.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:34.294Z,1513263334.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:34.481Z,1513263334.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:34.658Z,1513263334.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:34.886Z,1513263334.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:35.068Z,1513263335.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:35.475Z,1513263335.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:35.681Z,1513263335.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:35.875Z,1513263335.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:36.268Z,1513263336.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:36.478Z,1513263336.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:36.660Z,1513263336.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:36.885Z,1513263336.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:37.074Z,1513263337.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:37.077Z,1513263337.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T14:50:36.0Z
2017-12-14T14:55:37.077Z,1513263337.077 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T14:55:37.077Z,1513263337.077 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T14:55:37.529Z,1513263337.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:37.682Z,1513263337.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:38.479Z,1513263338.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:38.885Z,1513263338.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:39.684Z,1513263339.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:40.481Z,1513263340.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:40.885Z,1513263340.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:41.547Z,1513263341.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:41.601Z,1513263341.601 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0332.lzma
2017-12-14T14:55:41.657Z,1513263341.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:41.682Z,1513263341.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:42.033Z,1513263342.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:42.388Z,1513263342.388 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0332.lzma.bak
2017-12-14T14:55:42.388Z,1513263342.388 [DataOverHttps](INFO): SBD MOMSN=5439043
2017-12-14T14:55:42.475Z,1513263342.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:42.477Z,1513263342.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:42.882Z,1513263342.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:43.593Z,1513263343.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:43.678Z,1513263343.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:43.808Z,1513263343.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:44.484Z,1513263344.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:44.889Z,1513263344.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:45.685Z,1513263345.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:46.483Z,1513263346.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:46.889Z,1513263346.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:47.120Z,1513263347.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:47.310Z,1513263347.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:47.614Z,1513263347.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:47.688Z,1513263347.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:48.015Z,1513263348.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:48.417Z,1513263348.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:48.482Z,1513263348.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:48.831Z,1513263348.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:48.885Z,1513263348.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:49.682Z,1513263349.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:50.477Z,1513263350.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:50.882Z,1513263350.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:51.677Z,1513263351.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:52.473Z,1513263352.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:52.675Z,1513263352.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:52.749Z,1513263352.749 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0333.lzma
2017-12-14T14:55:52.823Z,1513263352.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:52.878Z,1513263352.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:53.176Z,1513263353.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:53.529Z,1513263353.529 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0333.lzma.bak
2017-12-14T14:55:53.529Z,1513263353.529 [DataOverHttps](INFO): SBD MOMSN=5439045
2017-12-14T14:55:53.604Z,1513263353.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:53.673Z,1513263353.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:54.471Z,1513263354.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:54.881Z,1513263354.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:54.958Z,1513263354.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:54.962Z,1513263354.962 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T14:55:54.962Z,1513263354.962 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T14:55:54.962Z,1513263354.962 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T14:55:55.103Z,1513263355.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:55.681Z,1513263355.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:56.477Z,1513263356.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:56.881Z,1513263356.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:57.678Z,1513263357.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:58.475Z,1513263358.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:58.535Z,1513263358.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:58.687Z,1513263358.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:58.913Z,1513263358.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:59.080Z,1513263359.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:59.443Z,1513263359.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:55:59.710Z,1513263359.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:55:59.834Z,1513263359.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:00.236Z,1513263360.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:00.506Z,1513263360.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:00.677Z,1513263360.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:00.910Z,1513263360.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:01.040Z,1513263361.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:01.451Z,1513263361.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:01.706Z,1513263361.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:01.847Z,1513263361.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:02.239Z,1513263362.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:02.503Z,1513263362.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:02.634Z,1513263362.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:02.910Z,1513263362.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:03.040Z,1513263363.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:03.440Z,1513263363.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:03.706Z,1513263363.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:03.898Z,1513263363.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:04.235Z,1513263364.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:04.503Z,1513263364.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:04.690Z,1513263364.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:04.913Z,1513263364.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:05.047Z,1513263365.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:05.444Z,1513263365.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:05.710Z,1513263365.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:05.932Z,1513263365.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:06.243Z,1513263366.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:06.505Z,1513263366.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:06.663Z,1513263366.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:06.911Z,1513263366.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:07.090Z,1513263367.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:07.460Z,1513263367.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:07.705Z,1513263367.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:07.843Z,1513263367.843 [BPC1](ERROR): Failed to receive battery data
2017-12-14T14:56:07.843Z,1513263367.843 [BPC1] Communications Fault, FailCount= 1
2017-12-14T14:56:07.843Z,1513263367.843 [BPC1](ERROR): Communications Fault
2017-12-14T14:56:07.851Z,1513263367.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:07.864Z,1513263367.864 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T14:56:08.247Z,1513263368.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:08.501Z,1513263368.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:08.647Z,1513263368.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:08.905Z,1513263368.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:09.044Z,1513263369.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:09.057Z,1513263369.057 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T14:56:09.057Z,1513263369.057 [BPC1] No Fault, FailCount= 1
2017-12-14T14:56:09.503Z,1513263369.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:09.702Z,1513263369.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:09.847Z,1513263369.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:10.332Z,1513263370.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:10.497Z,1513263370.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:10.646Z,1513263370.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:10.901Z,1513263370.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:11.055Z,1513263371.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:11.452Z,1513263371.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:11.698Z,1513263371.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:11.849Z,1513263371.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:12.238Z,1513263372.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:12.494Z,1513263372.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:12.647Z,1513263372.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:12.898Z,1513263372.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:13.053Z,1513263373.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:13.493Z,1513263373.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:13.693Z,1513263373.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:13.848Z,1513263373.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:14.230Z,1513263374.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:14.491Z,1513263374.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:14.655Z,1513263374.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:14.901Z,1513263374.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:15.058Z,1513263375.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:15.463Z,1513263375.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:15.698Z,1513263375.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:15.854Z,1513263375.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:16.227Z,1513263376.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:16.493Z,1513263376.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:16.667Z,1513263376.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:16.897Z,1513263376.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:17.070Z,1513263377.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:17.455Z,1513263377.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:17.696Z,1513263377.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:17.883Z,1513263377.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:18.267Z,1513263378.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:18.490Z,1513263378.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:18.688Z,1513263378.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:18.893Z,1513263378.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:19.044Z,1513263379.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:19.459Z,1513263379.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:19.690Z,1513263379.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:19.891Z,1513263379.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:20.279Z,1513263380.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:20.486Z,1513263380.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:20.660Z,1513263380.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:20.892Z,1513263380.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:21.079Z,1513263381.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:21.455Z,1513263381.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:21.687Z,1513263381.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:21.886Z,1513263381.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:22.289Z,1513263382.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:22.481Z,1513263382.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:22.641Z,1513263382.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:22.886Z,1513263382.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:23.059Z,1513263383.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:23.450Z,1513263383.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:23.681Z,1513263383.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:23.855Z,1513263383.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:24.260Z,1513263384.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:24.478Z,1513263384.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:24.651Z,1513263384.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:24.885Z,1513263384.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:25.055Z,1513263385.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:25.453Z,1513263385.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:25.681Z,1513263385.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:25.851Z,1513263385.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:26.278Z,1513263386.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:26.479Z,1513263386.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:26.631Z,1513263386.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:27.040Z,1513263387.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:27.273Z,1513263387.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:27.444Z,1513263387.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:27.842Z,1513263387.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:28.071Z,1513263388.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:28.229Z,1513263388.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:28.667Z,1513263388.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:28.866Z,1513263388.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:29.041Z,1513263389.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:29.441Z,1513263389.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:29.662Z,1513263389.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:29.882Z,1513263389.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:30.231Z,1513263390.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:30.457Z,1513263390.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:30.655Z,1513263390.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:31.056Z,1513263391.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:31.253Z,1513263391.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:31.461Z,1513263391.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:31.859Z,1513263391.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:32.049Z,1513263392.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:32.308Z,1513263392.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:32.659Z,1513263392.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:32.848Z,1513263392.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:33.064Z,1513263393.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:33.442Z,1513263393.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:33.522Z,1513263393.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:33.838Z,1513263393.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:33.925Z,1513263393.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:34.323Z,1513263394.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:34.329Z,1513263394.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:34.635Z,1513263394.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:35.067Z,1513263395.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:35.444Z,1513263395.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:35.837Z,1513263395.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:36.288Z,1513263396.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:36.688Z,1513263396.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:37.160Z,1513263397.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:37.447Z,1513263397.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:37.846Z,1513263397.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:38.240Z,1513263398.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:38.647Z,1513263398.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:39.060Z,1513263399.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:39.389Z,1513263399.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:39.471Z,1513263399.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:39.843Z,1513263399.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:40.185Z,1513263400.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T14:56:40.243Z,1513263400.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:40.633Z,1513263400.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:41.034Z,1513263401.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:41.435Z,1513263401.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:41.838Z,1513263401.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:42.240Z,1513263402.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:42.679Z,1513263402.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:43.056Z,1513263403.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:43.451Z,1513263403.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:43.855Z,1513263403.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:44.260Z,1513263404.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:44.662Z,1513263404.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:45.087Z,1513263405.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:45.460Z,1513263405.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:45.871Z,1513263405.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:46.259Z,1513263406.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:46.635Z,1513263406.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:47.074Z,1513263407.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:47.464Z,1513263407.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:47.872Z,1513263407.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:48.278Z,1513263408.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:48.661Z,1513263408.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:49.111Z,1513263409.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:49.441Z,1513263409.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:49.944Z,1513263409.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:50.276Z,1513263410.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:50.642Z,1513263410.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:51.106Z,1513263411.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:51.461Z,1513263411.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:51.860Z,1513263411.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:52.319Z,1513263412.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:52.647Z,1513263412.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:53.059Z,1513263413.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:53.455Z,1513263413.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:53.856Z,1513263413.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:54.231Z,1513263414.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:54.668Z,1513263414.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:55.089Z,1513263415.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:56:55.464Z,1513263415.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:02.479Z,1513263422.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:02.627Z,1513263422.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:03.007Z,1513263423.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:03.443Z,1513263423.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:03.834Z,1513263423.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:04.243Z,1513263424.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:04.607Z,1513263424.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:05.007Z,1513263425.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:05.431Z,1513263425.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:05.867Z,1513263425.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:06.280Z,1513263426.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:06.601Z,1513263426.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:06.995Z,1513263426.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:07.410Z,1513263427.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:07.800Z,1513263427.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:08.242Z,1513263428.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:08.643Z,1513263428.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:09.044Z,1513263429.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:09.401Z,1513263429.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:09.813Z,1513263429.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:10.216Z,1513263430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:10.610Z,1513263430.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:11.015Z,1513263431.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:11.419Z,1513263431.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:11.808Z,1513263431.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:12.208Z,1513263432.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:12.583Z,1513263432.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:13.013Z,1513263433.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:13.419Z,1513263433.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:13.789Z,1513263433.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:14.258Z,1513263434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:14.600Z,1513263434.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:15.066Z,1513263435.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:15.427Z,1513263435.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:15.792Z,1513263435.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:16.227Z,1513263436.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:16.599Z,1513263436.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:16.989Z,1513263436.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:17.396Z,1513263437.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:17.795Z,1513263437.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:18.234Z,1513263438.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:18.650Z,1513263438.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:18.990Z,1513263438.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:19.395Z,1513263439.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:19.792Z,1513263439.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:20.247Z,1513263440.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:20.607Z,1513263440.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:21.004Z,1513263441.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:21.444Z,1513263441.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:21.795Z,1513263441.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:22.207Z,1513263442.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:22.595Z,1513263442.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:22.990Z,1513263442.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:23.400Z,1513263443.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:23.798Z,1513263443.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:24.207Z,1513263444.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:24.679Z,1513263444.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:24.999Z,1513263444.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:25.395Z,1513263445.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:25.788Z,1513263445.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:26.199Z,1513263446.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:26.608Z,1513263446.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:27.005Z,1513263447.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:27.398Z,1513263447.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:27.818Z,1513263447.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:28.215Z,1513263448.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:28.597Z,1513263448.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:28.991Z,1513263448.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:29.414Z,1513263449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:29.819Z,1513263449.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:30.258Z,1513263450.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:30.592Z,1513263450.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:31.073Z,1513263451.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:31.389Z,1513263451.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:31.792Z,1513263451.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:32.215Z,1513263452.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:32.603Z,1513263452.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:33.026Z,1513263453.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:33.394Z,1513263453.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:33.822Z,1513263453.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:34.278Z,1513263454.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:34.605Z,1513263454.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:34.997Z,1513263454.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:35.450Z,1513263455.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:35.804Z,1513263455.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:36.202Z,1513263456.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:36.612Z,1513263456.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:36.998Z,1513263456.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:37.443Z,1513263457.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:37.798Z,1513263457.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:38.202Z,1513263458.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:38.642Z,1513263458.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:39.006Z,1513263459.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:39.415Z,1513263459.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:39.803Z,1513263459.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:40.211Z,1513263460.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:40.647Z,1513263460.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:41.003Z,1513263461.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:41.409Z,1513263461.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:41.797Z,1513263461.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:42.221Z,1513263462.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:42.594Z,1513263462.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:43.030Z,1513263463.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:43.396Z,1513263463.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:43.837Z,1513263463.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:44.201Z,1513263464.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:44.607Z,1513263464.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:45.004Z,1513263465.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:45.396Z,1513263465.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:45.800Z,1513263465.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:46.206Z,1513263466.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:46.597Z,1513263466.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:47.043Z,1513263467.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:47.443Z,1513263467.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:47.809Z,1513263467.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:48.253Z,1513263468.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:48.594Z,1513263468.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:48.984Z,1513263468.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:49.386Z,1513263469.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:49.788Z,1513263469.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:50.272Z,1513263470.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:50.609Z,1513263470.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:51.035Z,1513263471.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:51.390Z,1513263471.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:51.787Z,1513263471.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:52.191Z,1513263472.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:52.588Z,1513263472.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:52.988Z,1513263472.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:53.413Z,1513263473.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:53.815Z,1513263473.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:54.212Z,1513263474.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:54.595Z,1513263474.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:54.987Z,1513263474.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:55.395Z,1513263475.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:55.788Z,1513263475.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:59.319Z,1513263479.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:59.449Z,1513263479.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:57:59.818Z,1513263479.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:00.231Z,1513263480.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:00.603Z,1513263480.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:01.019Z,1513263481.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:01.407Z,1513263481.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:01.807Z,1513263481.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:02.247Z,1513263482.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:02.603Z,1513263482.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:03.003Z,1513263483.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:03.427Z,1513263483.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:03.809Z,1513263483.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:04.211Z,1513263484.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:04.624Z,1513263484.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:05.027Z,1513263485.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:05.407Z,1513263485.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:05.791Z,1513263485.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:06.188Z,1513263486.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:06.665Z,1513263486.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:07.013Z,1513263487.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:07.412Z,1513263487.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:07.814Z,1513263487.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:08.215Z,1513263488.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:08.588Z,1513263488.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:08.995Z,1513263488.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:09.439Z,1513263489.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:09.867Z,1513263489.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:10.220Z,1513263490.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:10.595Z,1513263490.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:10.994Z,1513263490.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:11.390Z,1513263491.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:11.880Z,1513263491.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:12.190Z,1513263492.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:12.619Z,1513263492.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:13.069Z,1513263493.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:13.420Z,1513263493.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:13.788Z,1513263493.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:14.198Z,1513263494.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:14.592Z,1513263494.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:14.991Z,1513263494.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:15.422Z,1513263495.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:15.796Z,1513263495.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:16.281Z,1513263496.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:16.595Z,1513263496.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:16.996Z,1513263496.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:17.403Z,1513263497.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:17.797Z,1513263497.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:18.196Z,1513263498.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:18.600Z,1513263498.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:19.001Z,1513263499.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:19.439Z,1513263499.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:19.798Z,1513263499.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:20.196Z,1513263500.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:20.196Z,1513263500.196 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 288
2017-12-14T14:58:20.196Z,1513263500.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T14:58:20.198Z,1513263500.198 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:20.198Z,1513263500.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 288
2017-12-14T14:58:20.198Z,1513263500.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T14:58:20.200Z,1513263500.200 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:20.200Z,1513263500.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 288
2017-12-14T14:58:20.200Z,1513263500.200 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T14:58:20.228Z,1513263500.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T14:58:20.234Z,1513263500.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T14:58:20.235Z,1513263500.235 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T14:58:20.657Z,1513263500.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T14:58:20.657Z,1513263500.657 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 288
2017-12-14T14:58:20.658Z,1513263500.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T14:58:20.658Z,1513263500.658 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 288
2017-12-14T14:58:20.658Z,1513263500.658 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T14:58:20.658Z,1513263500.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 288
2017-12-14T14:58:20.992Z,1513263500.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T14:58:20.998Z,1513263500.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:58:20.998Z,1513263500.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:58:20.998Z,1513263500.998 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T14:58:20.999Z,1513263500.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:58:20.999Z,1513263500.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:58:20.000Z,1513263501.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T14:58:20.000Z,1513263501.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T14:58:21.000Z,1513263501.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T14:58:21.446Z,1513263501.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:21.807Z,1513263501.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:22.211Z,1513263502.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:22.647Z,1513263502.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:23.001Z,1513263503.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:23.420Z,1513263503.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:23.801Z,1513263503.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:24.211Z,1513263504.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:24.613Z,1513263504.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:25.015Z,1513263505.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:25.406Z,1513263505.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:25.820Z,1513263505.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:26.219Z,1513263506.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:26.608Z,1513263506.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:27.008Z,1513263507.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:27.410Z,1513263507.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:27.806Z,1513263507.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:28.203Z,1513263508.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:28.607Z,1513263508.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:29.035Z,1513263509.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:29.396Z,1513263509.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:29.787Z,1513263509.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:30.237Z,1513263510.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:30.616Z,1513263510.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:31.023Z,1513263511.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:31.417Z,1513263511.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:31.835Z,1513263511.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:32.191Z,1513263512.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:32.593Z,1513263512.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:32.991Z,1513263512.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:33.416Z,1513263513.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:33.800Z,1513263513.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:34.218Z,1513263514.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:34.592Z,1513263514.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:34.991Z,1513263514.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:35.428Z,1513263515.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:35.867Z,1513263515.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:36.222Z,1513263516.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:36.600Z,1513263516.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:37.004Z,1513263517.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:37.444Z,1513263517.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:37.795Z,1513263517.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:38.200Z,1513263518.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:38.595Z,1513263518.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:38.995Z,1513263518.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:39.395Z,1513263519.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:39.800Z,1513263519.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:40.208Z,1513263520.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:40.589Z,1513263520.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:40.995Z,1513263520.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:41.393Z,1513263521.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:41.793Z,1513263521.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:42.206Z,1513263522.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:42.595Z,1513263522.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:42.997Z,1513263522.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:43.398Z,1513263523.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:43.838Z,1513263523.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:44.283Z,1513263524.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:44.621Z,1513263524.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:44.993Z,1513263524.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:45.435Z,1513263525.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:45.815Z,1513263525.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:46.204Z,1513263526.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:46.603Z,1513263526.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:46.999Z,1513263526.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:47.394Z,1513263527.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:47.793Z,1513263527.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:48.194Z,1513263528.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:48.608Z,1513263528.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:49.007Z,1513263529.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:49.451Z,1513263529.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:49.799Z,1513263529.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:50.208Z,1513263530.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:50.600Z,1513263530.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:50.991Z,1513263530.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:51.403Z,1513263531.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:51.801Z,1513263531.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:52.206Z,1513263532.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:52.595Z,1513263532.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:53.003Z,1513263533.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:53.402Z,1513263533.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:53.827Z,1513263533.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:54.206Z,1513263534.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:54.599Z,1513263534.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:55.011Z,1513263535.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:55.405Z,1513263535.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:55.795Z,1513263535.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:59.284Z,1513263539.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:59.392Z,1513263539.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:58:59.787Z,1513263539.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:00.187Z,1513263540.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:00.584Z,1513263540.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:00.990Z,1513263540.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:01.371Z,1513263541.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:01.764Z,1513263541.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:02.169Z,1513263542.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:02.589Z,1513263542.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:02.966Z,1513263542.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:03.361Z,1513263543.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:03.763Z,1513263543.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:04.260Z,1513263544.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:04.569Z,1513263544.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:04.968Z,1513263544.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:05.370Z,1513263545.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:05.776Z,1513263545.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:06.275Z,1513263546.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:06.566Z,1513263546.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:07.003Z,1513263547.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:07.402Z,1513263547.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:07.795Z,1513263547.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:08.197Z,1513263548.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:08.581Z,1513263548.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:08.983Z,1513263548.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:09.379Z,1513263549.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:09.750Z,1513263549.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:10.199Z,1513263550.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:10.627Z,1513263550.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:10.979Z,1513263550.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:11.383Z,1513263551.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:11.785Z,1513263551.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:12.233Z,1513263552.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:12.588Z,1513263552.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:12.983Z,1513263552.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:13.362Z,1513263553.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:13.797Z,1513263553.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:14.191Z,1513263554.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:14.587Z,1513263554.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:14.985Z,1513263554.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:15.363Z,1513263555.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:15.759Z,1513263555.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:16.195Z,1513263556.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:16.564Z,1513263556.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:17.035Z,1513263557.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:17.384Z,1513263557.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:17.789Z,1513263557.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:18.211Z,1513263558.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:18.560Z,1513263558.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:18.993Z,1513263558.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:19.364Z,1513263559.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:19.763Z,1513263559.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:20.255Z,1513263560.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:20.575Z,1513263560.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:20.968Z,1513263560.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:21.366Z,1513263561.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:21.765Z,1513263561.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:22.203Z,1513263562.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:22.564Z,1513263562.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:22.594Z,1513263562.594 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T14:59:22.971Z,1513263562.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:23.411Z,1513263563.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:23.779Z,1513263563.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:24.207Z,1513263564.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:24.565Z,1513263564.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:24.971Z,1513263564.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:25.370Z,1513263565.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:25.765Z,1513263565.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:26.241Z,1513263566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:26.522Z,1513263566.522 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T14:59:26.522Z,1513263566.522 [NAL9602] Data Fault, FailCount= 4
2017-12-14T14:59:26.522Z,1513263566.522 [NAL9602](ERROR): Data Fault
2017-12-14T14:59:26.575Z,1513263566.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:26.602Z,1513263566.602 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T14:59:26.922Z,1513263566.922 [NAL9602](INFO): Powering down
2017-12-14T14:59:26.978Z,1513263566.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:27.366Z,1513263567.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:27.765Z,1513263567.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:27.779Z,1513263567.779 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T14:59:27.779Z,1513263567.779 [NAL9602] No Fault, FailCount= 4
2017-12-14T14:59:28.246Z,1513263568.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:28.571Z,1513263568.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:29.019Z,1513263569.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:29.364Z,1513263569.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:29.840Z,1513263569.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:30.176Z,1513263570.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:30.576Z,1513263570.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:30.974Z,1513263570.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:31.362Z,1513263571.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:31.764Z,1513263571.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:32.203Z,1513263572.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:32.567Z,1513263572.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:32.998Z,1513263572.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:33.372Z,1513263573.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:33.761Z,1513263573.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:34.199Z,1513263574.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:34.564Z,1513263574.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:34.962Z,1513263574.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:35.365Z,1513263575.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:35.816Z,1513263575.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:36.224Z,1513263576.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:36.576Z,1513263576.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:36.971Z,1513263576.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:37.366Z,1513263577.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:37.765Z,1513263577.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:38.209Z,1513263578.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:38.568Z,1513263578.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:38.969Z,1513263578.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:39.408Z,1513263579.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:39.768Z,1513263579.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:40.243Z,1513263580.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:40.567Z,1513263580.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:40.962Z,1513263580.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:41.362Z,1513263581.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:41.761Z,1513263581.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:42.161Z,1513263582.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:42.622Z,1513263582.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:42.970Z,1513263582.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:43.364Z,1513263583.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:43.764Z,1513263583.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:44.162Z,1513263584.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:44.571Z,1513263584.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:44.963Z,1513263584.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:45.363Z,1513263585.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:45.819Z,1513263585.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:46.196Z,1513263586.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:46.568Z,1513263586.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:46.970Z,1513263586.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:46.983Z,1513263586.983 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T14:59:46.983Z,1513263586.983 [DropWeight] No Fault, FailCount= 1
2017-12-14T14:59:47.371Z,1513263587.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:47.773Z,1513263587.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:48.197Z,1513263588.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:48.572Z,1513263588.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:49.029Z,1513263589.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:49.353Z,1513263589.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:49.776Z,1513263589.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:50.225Z,1513263590.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:50.603Z,1513263590.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:50.958Z,1513263590.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:51.363Z,1513263591.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:51.761Z,1513263591.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:52.255Z,1513263592.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:52.563Z,1513263592.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:52.993Z,1513263592.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:53.357Z,1513263593.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:53.790Z,1513263593.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:54.251Z,1513263594.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:54.562Z,1513263594.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:54.963Z,1513263594.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:55.398Z,1513263595.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:55.763Z,1513263595.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:56.165Z,1513263596.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:59.549Z,1513263599.549 [NAL9602](INFO): Powering up NAL9602
2017-12-14T14:59:59.587Z,1513263599.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T14:59:59.720Z,1513263599.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:00.181Z,1513263600.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:00.506Z,1513263600.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:00.922Z,1513263600.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:01.328Z,1513263601.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:01.720Z,1513263601.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:02.170Z,1513263602.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:02.509Z,1513263602.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:02.900Z,1513263602.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:03.305Z,1513263603.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:03.710Z,1513263603.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:04.171Z,1513263604.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:04.491Z,1513263604.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:04.958Z,1513263604.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:05.323Z,1513263605.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:05.693Z,1513263605.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:06.177Z,1513263606.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:06.518Z,1513263606.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:06.922Z,1513263606.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:07.322Z,1513263607.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:07.694Z,1513263607.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:08.207Z,1513263608.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:08.518Z,1513263608.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:08.902Z,1513263608.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:09.310Z,1513263609.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:09.708Z,1513263609.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:10.121Z,1513263610.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:10.487Z,1513263610.487 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:00:10.552Z,1513263610.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:10.909Z,1513263610.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:11.328Z,1513263611.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:11.719Z,1513263611.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:12.119Z,1513263612.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:12.553Z,1513263612.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:12.916Z,1513263612.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:13.338Z,1513263613.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:13.703Z,1513263613.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:14.174Z,1513263614.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:14.559Z,1513263614.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:14.904Z,1513263614.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:15.303Z,1513263615.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:15.706Z,1513263615.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:16.171Z,1513263616.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:16.497Z,1513263616.497 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:00:16.497Z,1513263616.497 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:00:16.497Z,1513263616.497 [BPC1](ERROR): Communications Fault
2017-12-14T15:00:16.505Z,1513263616.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:16.544Z,1513263616.544 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:00:16.916Z,1513263616.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:17.315Z,1513263617.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:17.746Z,1513263617.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:17.768Z,1513263617.768 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:00:17.789Z,1513263617.789 [BPC1] No Fault, FailCount= 1
2017-12-14T15:00:18.223Z,1513263618.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:18.513Z,1513263618.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:18.898Z,1513263618.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:19.306Z,1513263619.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:19.707Z,1513263619.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:20.207Z,1513263620.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:20.527Z,1513263620.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:20.956Z,1513263620.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:21.303Z,1513263621.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:21.683Z,1513263621.683 [PNI_TCM](ERROR): CRC does not match. Expected:0x10846 got:0x15910
2017-12-14T15:00:21.707Z,1513263621.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:22.103Z,1513263622.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:22.530Z,1513263622.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:22.924Z,1513263622.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:23.315Z,1513263623.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:23.719Z,1513263623.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:24.111Z,1513263624.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:24.547Z,1513263624.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:24.903Z,1513263624.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:25.323Z,1513263625.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:25.701Z,1513263625.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:26.119Z,1513263626.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:26.590Z,1513263626.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:26.911Z,1513263626.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:27.318Z,1513263627.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:27.717Z,1513263627.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:28.213Z,1513263628.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:28.503Z,1513263628.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:28.935Z,1513263628.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:29.327Z,1513263629.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:29.713Z,1513263629.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:30.179Z,1513263630.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:30.530Z,1513263630.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:30.893Z,1513263630.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x17908 got:0x7490
2017-12-14T15:00:30.928Z,1513263630.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:31.309Z,1513263631.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:31.703Z,1513263631.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:32.182Z,1513263632.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:32.520Z,1513263632.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:32.914Z,1513263632.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:33.313Z,1513263633.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:33.721Z,1513263633.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:34.182Z,1513263634.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:34.510Z,1513263634.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:34.915Z,1513263634.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:35.312Z,1513263635.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:35.715Z,1513263635.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:36.107Z,1513263636.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:36.515Z,1513263636.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:36.945Z,1513263636.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:37.292Z,1513263637.292 [PNI_TCM](ERROR): CRC does not match. Expected:0x31291 got:0x6591
2017-12-14T15:00:37.323Z,1513263637.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:37.737Z,1513263637.737 [PNI_TCM](ERROR): CRC does not match. Expected:0x14574 got:0x160
2017-12-14T15:00:37.780Z,1513263637.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:38.126Z,1513263638.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:38.571Z,1513263638.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:38.951Z,1513263638.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:39.301Z,1513263639.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:39.742Z,1513263639.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:40.112Z,1513263640.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:40.538Z,1513263640.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:40.943Z,1513263640.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:41.335Z,1513263641.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:41.731Z,1513263641.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:42.151Z,1513263642.151 [PNI_TCM](ERROR): CRC does not match. Expected:0x61425 got:0x16897
2017-12-14T15:00:42.179Z,1513263642.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:42.502Z,1513263642.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:42.903Z,1513263642.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:43.317Z,1513263643.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:43.708Z,1513263643.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:44.192Z,1513263644.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:44.535Z,1513263644.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:44.911Z,1513263644.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:45.306Z,1513263645.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:45.707Z,1513263645.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:46.162Z,1513263646.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:46.506Z,1513263646.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:46.916Z,1513263646.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:47.315Z,1513263647.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:47.712Z,1513263647.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:48.187Z,1513263648.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:48.516Z,1513263648.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:48.884Z,1513263648.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x2993 got:0x33163
2017-12-14T15:00:48.914Z,1513263648.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:49.312Z,1513263649.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:49.715Z,1513263649.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:50.119Z,1513263650.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:50.542Z,1513263650.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:50.904Z,1513263650.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:51.315Z,1513263651.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:51.706Z,1513263651.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:52.183Z,1513263652.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:52.536Z,1513263652.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:52.913Z,1513263652.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:53.310Z,1513263653.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:53.757Z,1513263653.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:54.107Z,1513263654.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:54.555Z,1513263654.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:54.911Z,1513263654.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:55.304Z,1513263655.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:55.307Z,1513263655.307 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:00:55.307Z,1513263655.307 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:00:55.307Z,1513263655.307 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:00:55.307Z,1513263655.307 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:00:55.707Z,1513263655.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:55.712Z,1513263655.712 [Default:CheckIn:D] Stopped
2017-12-14T15:00:55.712Z,1513263655.712 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:00:56.167Z,1513263656.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 867.672005 min 
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn:E] Stopped
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn] Stopped
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn](INFO): Running loop #84
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn] Running Loop=84
2017-12-14T15:00:56.179Z,1513263656.179 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:00:56.180Z,1513263656.180 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:00:56.532Z,1513263656.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:00:59.974Z,1513263659.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:00.164Z,1513263660.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:00.511Z,1513263660.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:00.874Z,1513263660.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:01.268Z,1513263661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:01.698Z,1513263661.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:02.116Z,1513263662.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:02.511Z,1513263662.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:02.889Z,1513263662.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:03.283Z,1513263663.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:03.671Z,1513263663.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:04.118Z,1513263664.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:04.455Z,1513263664.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:04.875Z,1513263664.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:05.276Z,1513263665.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:05.664Z,1513263665.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:06.058Z,1513263666.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:06.523Z,1513263666.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:06.876Z,1513263666.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:07.269Z,1513263667.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:07.675Z,1513263667.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:08.048Z,1513263668.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:08.539Z,1513263668.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:08.899Z,1513263668.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:09.273Z,1513263669.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:09.684Z,1513263669.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:10.107Z,1513263670.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:10.459Z,1513263670.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:10.907Z,1513263670.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:11.280Z,1513263671.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:11.677Z,1513263671.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:12.060Z,1513263672.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:12.459Z,1513263672.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:12.880Z,1513263672.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:13.271Z,1513263673.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:13.704Z,1513263673.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:14.063Z,1513263674.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:14.463Z,1513263674.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:14.870Z,1513263674.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:15.249Z,1513263675.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:15.653Z,1513263675.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:16.128Z,1513263676.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:16.480Z,1513263676.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:16.925Z,1513263676.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:17.277Z,1513263677.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:17.664Z,1513263677.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:18.075Z,1513263678.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:18.475Z,1513263678.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:18.887Z,1513263678.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:19.288Z,1513263679.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:19.702Z,1513263679.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:20.112Z,1513263680.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:20.586Z,1513263680.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:20.908Z,1513263680.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:21.295Z,1513263681.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:21.296Z,1513263681.296 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 289
2017-12-14T15:01:21.296Z,1513263681.296 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:01:21.303Z,1513263681.303 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:21.303Z,1513263681.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 289
2017-12-14T15:01:21.303Z,1513263681.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:01:21.313Z,1513263681.313 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:21.313Z,1513263681.313 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 289
2017-12-14T15:01:21.313Z,1513263681.313 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:01:21.355Z,1513263681.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:01:21.355Z,1513263681.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:01:21.356Z,1513263681.356 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:01:21.722Z,1513263681.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:01:21.722Z,1513263681.722 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 289
2017-12-14T15:01:21.723Z,1513263681.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:01:21.723Z,1513263681.723 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 289
2017-12-14T15:01:21.723Z,1513263681.723 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:01:21.723Z,1513263681.723 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 289
2017-12-14T15:01:22.134Z,1513263682.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:01:22.135Z,1513263682.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:01:22.135Z,1513263682.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:01:22.135Z,1513263682.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:01:22.136Z,1513263682.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:01:22.136Z,1513263682.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:01:22.137Z,1513263682.137 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:01:22.137Z,1513263682.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:01:22.137Z,1513263682.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:01:22.599Z,1513263682.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:22.967Z,1513263682.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:23.283Z,1513263683.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:23.735Z,1513263683.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:24.159Z,1513263684.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:24.490Z,1513263684.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:24.938Z,1513263684.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:25.291Z,1513263685.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:25.726Z,1513263685.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:26.147Z,1513263686.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:26.455Z,1513263686.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:26.906Z,1513263686.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:27.294Z,1513263687.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:27.702Z,1513263687.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:28.060Z,1513263688.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:28.475Z,1513263688.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:28.905Z,1513263688.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:29.306Z,1513263689.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:29.780Z,1513263689.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:30.170Z,1513263690.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:30.495Z,1513263690.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:30.876Z,1513263690.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:31.300Z,1513263691.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:31.715Z,1513263691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:32.103Z,1513263692.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:32.480Z,1513263692.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:32.902Z,1513263692.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:33.337Z,1513263693.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:33.691Z,1513263693.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:34.088Z,1513263694.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:34.602Z,1513263694.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:34.895Z,1513263694.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:35.268Z,1513263695.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:35.750Z,1513263695.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:36.071Z,1513263696.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:36.577Z,1513263696.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:36.934Z,1513263696.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:37.300Z,1513263697.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:37.702Z,1513263697.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:38.166Z,1513263698.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:38.484Z,1513263698.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:38.912Z,1513263698.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:39.262Z,1513263699.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:39.662Z,1513263699.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:40.236Z,1513263700.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:40.518Z,1513263700.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:40.912Z,1513263700.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:41.289Z,1513263701.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:41.688Z,1513263701.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:42.133Z,1513263702.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:42.475Z,1513263702.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:42.913Z,1513263702.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:43.318Z,1513263703.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:43.755Z,1513263703.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:44.149Z,1513263704.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:44.499Z,1513263704.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:44.898Z,1513263704.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:45.339Z,1513263705.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:45.675Z,1513263705.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:46.075Z,1513263706.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:46.523Z,1513263706.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:46.881Z,1513263706.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:47.314Z,1513263707.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:47.667Z,1513263707.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:48.103Z,1513263708.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:48.526Z,1513263708.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:48.918Z,1513263708.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:49.291Z,1513263709.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:49.684Z,1513263709.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:50.083Z,1513263710.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:50.548Z,1513263710.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:50.890Z,1513263710.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:51.308Z,1513263711.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:51.691Z,1513263711.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:52.130Z,1513263712.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:52.466Z,1513263712.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:52.879Z,1513263712.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:53.279Z,1513263713.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:53.707Z,1513263713.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:54.141Z,1513263714.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:54.457Z,1513263714.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:54.887Z,1513263714.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:55.267Z,1513263715.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:55.697Z,1513263715.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:56.064Z,1513263716.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:56.479Z,1513263716.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:01:56.877Z,1513263716.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:00.513Z,1513263720.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:00.643Z,1513263720.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:01.004Z,1513263721.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:01.397Z,1513263721.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:01.795Z,1513263721.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:02.208Z,1513263722.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:02.601Z,1513263722.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:03.035Z,1513263723.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:03.408Z,1513263723.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:03.797Z,1513263723.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:04.200Z,1513263724.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:04.615Z,1513263724.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:05.009Z,1513263725.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:05.415Z,1513263725.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:05.816Z,1513263725.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:06.239Z,1513263726.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:06.613Z,1513263726.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:07.005Z,1513263727.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:07.402Z,1513263727.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:07.830Z,1513263727.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:08.216Z,1513263728.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:08.646Z,1513263728.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:09.016Z,1513263729.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:09.427Z,1513263729.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:09.826Z,1513263729.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:10.194Z,1513263730.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:10.591Z,1513263730.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:11.018Z,1513263731.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:11.420Z,1513263731.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:11.823Z,1513263731.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:12.198Z,1513263732.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:12.599Z,1513263732.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:13.071Z,1513263733.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:13.395Z,1513263733.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:13.800Z,1513263733.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:14.244Z,1513263734.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:14.607Z,1513263734.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:14.997Z,1513263734.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:15.400Z,1513263735.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:15.794Z,1513263735.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:16.246Z,1513263736.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:16.607Z,1513263736.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:17.001Z,1513263737.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:17.409Z,1513263737.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:17.830Z,1513263737.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:18.199Z,1513263738.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:18.594Z,1513263738.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:19.005Z,1513263739.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:19.446Z,1513263739.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:19.808Z,1513263739.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:20.201Z,1513263740.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:20.595Z,1513263740.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:21.007Z,1513263741.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:21.402Z,1513263741.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:21.797Z,1513263741.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:22.205Z,1513263742.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:22.655Z,1513263742.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:23.040Z,1513263743.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:23.396Z,1513263743.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:23.800Z,1513263743.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:24.204Z,1513263744.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:24.605Z,1513263744.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:25.020Z,1513263745.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:25.412Z,1513263745.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:25.864Z,1513263745.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:26.205Z,1513263746.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:26.607Z,1513263746.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:26.999Z,1513263746.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:27.396Z,1513263747.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:27.806Z,1513263747.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:28.259Z,1513263748.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:28.614Z,1513263748.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:29.049Z,1513263749.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:29.404Z,1513263749.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:29.828Z,1513263749.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:30.204Z,1513263750.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:30.627Z,1513263750.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:31.013Z,1513263751.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:31.458Z,1513263751.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:31.879Z,1513263751.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:32.230Z,1513263752.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:32.596Z,1513263752.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:33.010Z,1513263753.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:33.390Z,1513263753.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:33.790Z,1513263753.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:34.238Z,1513263754.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:34.621Z,1513263754.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:35.023Z,1513263755.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:35.430Z,1513263755.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:35.795Z,1513263755.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:36.198Z,1513263756.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:36.595Z,1513263756.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:36.000Z,1513263757.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:37.427Z,1513263757.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:37.805Z,1513263757.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:38.202Z,1513263758.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:38.647Z,1513263758.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:38.987Z,1513263758.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:39.416Z,1513263759.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:39.819Z,1513263759.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:40.227Z,1513263760.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:40.614Z,1513263760.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:41.012Z,1513263761.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:41.402Z,1513263761.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:41.874Z,1513263761.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:42.246Z,1513263762.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:42.599Z,1513263762.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:43.004Z,1513263763.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:43.401Z,1513263763.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:43.825Z,1513263763.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:44.200Z,1513263764.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:44.650Z,1513263764.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:45.032Z,1513263765.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:45.403Z,1513263765.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:45.667Z,1513263765.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:02:45.799Z,1513263765.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:46.208Z,1513263766.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:46.463Z,1513263766.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:02:46.603Z,1513263766.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:46.882Z,1513263766.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:02:47.001Z,1513263767.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:47.402Z,1513263767.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:47.800Z,1513263767.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:48.265Z,1513263768.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:48.599Z,1513263768.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:49.015Z,1513263769.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:49.408Z,1513263769.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:49.808Z,1513263769.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:50.200Z,1513263770.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:50.595Z,1513263770.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:50.995Z,1513263770.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:51.452Z,1513263771.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:51.850Z,1513263771.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:52.211Z,1513263772.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:52.609Z,1513263772.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:53.042Z,1513263773.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:53.403Z,1513263773.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:53.831Z,1513263773.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:54.212Z,1513263774.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:54.612Z,1513263774.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:55.009Z,1513263775.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:55.413Z,1513263775.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:55.804Z,1513263775.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:56.261Z,1513263776.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:56.603Z,1513263776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:02:57.006Z,1513263777.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:00.374Z,1513263780.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:00.554Z,1513263780.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:00.903Z,1513263780.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:01.292Z,1513263781.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:01.686Z,1513263781.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:02.148Z,1513263782.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:02.461Z,1513263782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:02.863Z,1513263782.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:03.275Z,1513263783.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:03.674Z,1513263783.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:04.170Z,1513263784.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:04.497Z,1513263784.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:04.895Z,1513263784.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:05.267Z,1513263785.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:05.664Z,1513263785.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:06.111Z,1513263786.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:06.482Z,1513263786.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:06.888Z,1513263786.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:07.298Z,1513263787.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:07.682Z,1513263787.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:08.059Z,1513263788.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:08.452Z,1513263788.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:08.876Z,1513263788.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:09.286Z,1513263789.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:09.676Z,1513263789.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:10.087Z,1513263790.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:10.510Z,1513263790.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:10.903Z,1513263790.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:11.262Z,1513263791.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:11.671Z,1513263791.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:12.064Z,1513263792.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:12.547Z,1513263792.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:12.914Z,1513263792.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:13.287Z,1513263793.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:13.739Z,1513263793.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:14.090Z,1513263794.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:14.546Z,1513263794.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:14.911Z,1513263794.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:15.266Z,1513263795.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:15.689Z,1513263795.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:16.146Z,1513263796.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:16.487Z,1513263796.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:16.900Z,1513263796.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:17.263Z,1513263797.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:17.659Z,1513263797.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:18.060Z,1513263798.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:18.467Z,1513263798.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:18.872Z,1513263798.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:19.291Z,1513263799.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:19.684Z,1513263799.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:20.158Z,1513263800.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:20.478Z,1513263800.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:20.888Z,1513263800.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:21.291Z,1513263801.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:21.654Z,1513263801.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:22.121Z,1513263802.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:22.491Z,1513263802.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:22.876Z,1513263802.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:23.271Z,1513263803.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:23.671Z,1513263803.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:24.102Z,1513263804.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:24.471Z,1513263804.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:24.875Z,1513263804.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:25.282Z,1513263805.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:25.684Z,1513263805.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:26.075Z,1513263806.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:26.590Z,1513263806.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:26.886Z,1513263806.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:27.262Z,1513263807.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:27.668Z,1513263807.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:28.071Z,1513263808.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:28.557Z,1513263808.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:28.895Z,1513263808.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:29.278Z,1513263809.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:29.670Z,1513263809.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:30.131Z,1513263810.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:30.456Z,1513263810.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:30.885Z,1513263810.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:31.298Z,1513263811.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:31.686Z,1513263811.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:32.138Z,1513263812.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:32.475Z,1513263812.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:32.910Z,1513263812.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:33.260Z,1513263813.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:33.660Z,1513263813.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:34.156Z,1513263814.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:34.515Z,1513263814.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:34.889Z,1513263814.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:35.258Z,1513263815.258 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:03:35.258Z,1513263815.258 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:03:35.258Z,1513263815.258 [BPC1](ERROR): Data Fault
2017-12-14T15:03:35.274Z,1513263815.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:35.288Z,1513263815.288 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:03:35.671Z,1513263815.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:36.188Z,1513263816.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:36.487Z,1513263816.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:36.519Z,1513263816.519 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:03:36.519Z,1513263816.519 [BPC1] No Fault, FailCount= 1
2017-12-14T15:03:36.935Z,1513263816.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:37.275Z,1513263817.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:37.678Z,1513263817.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:38.083Z,1513263818.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:38.464Z,1513263818.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:38.885Z,1513263818.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:39.259Z,1513263819.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:39.659Z,1513263819.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:40.093Z,1513263820.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:40.553Z,1513263820.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:40.958Z,1513263820.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:41.271Z,1513263821.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:41.674Z,1513263821.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:42.073Z,1513263822.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:42.581Z,1513263822.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:42.903Z,1513263822.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:43.271Z,1513263823.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:43.681Z,1513263823.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:44.063Z,1513263824.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:44.472Z,1513263824.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:44.883Z,1513263824.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:45.303Z,1513263825.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:45.660Z,1513263825.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:46.151Z,1513263826.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:46.488Z,1513263826.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:46.887Z,1513263826.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:47.267Z,1513263827.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:47.666Z,1513263827.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:48.142Z,1513263828.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:48.482Z,1513263828.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:48.936Z,1513263828.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:49.294Z,1513263829.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:49.690Z,1513263829.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:50.138Z,1513263830.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:50.466Z,1513263830.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:50.871Z,1513263830.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:51.281Z,1513263831.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:51.673Z,1513263831.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:52.115Z,1513263832.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:52.495Z,1513263832.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:52.893Z,1513263832.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:53.283Z,1513263833.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:53.657Z,1513263833.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:54.077Z,1513263834.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:54.558Z,1513263834.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:54.880Z,1513263834.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:55.310Z,1513263835.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:55.672Z,1513263835.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:56.077Z,1513263836.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:56.523Z,1513263836.523 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:03:56.524Z,1513263836.524 [BPC1] Data Fault, FailCount= 2
2017-12-14T15:03:56.524Z,1513263836.524 [BPC1](ERROR): Data Fault
2017-12-14T15:03:56.542Z,1513263836.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:56.585Z,1513263836.585 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:03:56.898Z,1513263836.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:03:57.274Z,1513263837.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:00.829Z,1513263840.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:00.842Z,1513263840.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:04:00.842Z,1513263840.842 [BPC1] No Fault, FailCount= 2
2017-12-14T15:04:01.020Z,1513263841.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:01.304Z,1513263841.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:01.740Z,1513263841.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:02.192Z,1513263842.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:02.508Z,1513263842.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:02.932Z,1513263842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:03.307Z,1513263843.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:03.730Z,1513263843.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:04.200Z,1513263844.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:04.517Z,1513263844.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:04.959Z,1513263844.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:05.310Z,1513263845.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:05.694Z,1513263845.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:05.719Z,1513263845.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:06.193Z,1513263846.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:06.491Z,1513263846.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:06.539Z,1513263846.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:06.898Z,1513263846.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:06.926Z,1513263846.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:07.317Z,1513263847.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:07.693Z,1513263847.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:07.704Z,1513263847.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:08.142Z,1513263848.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:08.490Z,1513263848.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:08.546Z,1513263848.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:08.893Z,1513263848.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:08.948Z,1513263848.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:09.351Z,1513263849.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:09.691Z,1513263849.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:09.723Z,1513263849.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:10.111Z,1513263850.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:10.486Z,1513263850.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:10.553Z,1513263850.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:10.889Z,1513263850.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:10.919Z,1513263850.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:11.351Z,1513263851.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:11.685Z,1513263851.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:11.716Z,1513263851.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:12.181Z,1513263852.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:12.481Z,1513263852.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:12.516Z,1513263852.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:12.888Z,1513263852.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:12.915Z,1513263852.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:13.314Z,1513263853.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:13.686Z,1513263853.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:13.735Z,1513263853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:14.183Z,1513263854.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:14.482Z,1513263854.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:14.536Z,1513263854.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:14.885Z,1513263854.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:14.933Z,1513263854.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:15.308Z,1513263855.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:15.681Z,1513263855.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:15.724Z,1513263855.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:16.169Z,1513263856.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:16.480Z,1513263856.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:16.530Z,1513263856.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:16.885Z,1513263856.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:16.912Z,1513263856.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:17.307Z,1513263857.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:17.681Z,1513263857.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:17.751Z,1513263857.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:18.186Z,1513263858.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:18.477Z,1513263858.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:18.535Z,1513263858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:18.881Z,1513263858.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:18.933Z,1513263858.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:19.313Z,1513263859.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:19.679Z,1513263859.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:19.722Z,1513263859.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:20.114Z,1513263860.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:20.474Z,1513263860.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:20.511Z,1513263860.511 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:04:20.511Z,1513263860.511 [BPC1] Data Fault, FailCount= 3
2017-12-14T15:04:20.511Z,1513263860.511 [BPC1](ERROR): Data Fault
2017-12-14T15:04:20.524Z,1513263860.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:20.554Z,1513263860.554 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:04:20.877Z,1513263860.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:21.003Z,1513263861.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:21.329Z,1513263861.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:21.674Z,1513263861.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:21.733Z,1513263861.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:21.746Z,1513263861.746 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:04:21.747Z,1513263861.747 [BPC1] No Fault, FailCount= 3
2017-12-14T15:04:22.155Z,1513263862.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:22.155Z,1513263862.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 290
2017-12-14T15:04:22.155Z,1513263862.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:04:22.180Z,1513263862.180 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:22.180Z,1513263862.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 290
2017-12-14T15:04:22.180Z,1513263862.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:04:22.182Z,1513263862.182 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:22.182Z,1513263862.182 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 290
2017-12-14T15:04:22.182Z,1513263862.182 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:04:22.193Z,1513263862.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:04:22.194Z,1513263862.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:04:22.194Z,1513263862.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:04:22.471Z,1513263862.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:22.572Z,1513263862.572 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:04:22.572Z,1513263862.572 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 290
2017-12-14T15:04:22.572Z,1513263862.572 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:04:22.572Z,1513263862.572 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 290
2017-12-14T15:04:22.577Z,1513263862.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:04:22.577Z,1513263862.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 290
2017-12-14T15:04:22.883Z,1513263862.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:22.973Z,1513263862.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:04:22.974Z,1513263862.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:04:22.974Z,1513263862.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:04:22.974Z,1513263862.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:04:22.975Z,1513263862.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:04:22.975Z,1513263862.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:04:22.975Z,1513263862.975 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:04:22.976Z,1513263862.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:04:22.976Z,1513263862.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:04:23.310Z,1513263863.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:23.678Z,1513263863.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:23.713Z,1513263863.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:24.148Z,1513263864.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:24.475Z,1513263864.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:24.560Z,1513263864.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:24.890Z,1513263864.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:24.927Z,1513263864.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:25.320Z,1513263865.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:25.687Z,1513263865.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:25.717Z,1513263865.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:26.151Z,1513263866.151 [PNI_TCM](ERROR): CRC does not match. Expected:0x5897 got:0x192
2017-12-14T15:04:26.183Z,1513263866.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:26.481Z,1513263866.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:26.535Z,1513263866.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:26.886Z,1513263866.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:26.919Z,1513263866.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:27.350Z,1513263867.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:27.682Z,1513263867.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:27.727Z,1513263867.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:28.188Z,1513263868.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:28.478Z,1513263868.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:28.540Z,1513263868.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:28.881Z,1513263868.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:28.923Z,1513263868.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:29.326Z,1513263869.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:29.681Z,1513263869.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:29.704Z,1513263869.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:30.203Z,1513263870.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:30.498Z,1513263870.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:30.576Z,1513263870.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:30.902Z,1513263870.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:30.924Z,1513263870.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:31.315Z,1513263871.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:31.697Z,1513263871.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:31.708Z,1513263871.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:32.162Z,1513263872.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:32.493Z,1513263872.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:32.517Z,1513263872.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:32.897Z,1513263872.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:32.934Z,1513263872.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:33.327Z,1513263873.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:33.694Z,1513263873.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:33.827Z,1513263873.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:34.156Z,1513263874.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:34.489Z,1513263874.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:34.523Z,1513263874.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:34.893Z,1513263874.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:34.924Z,1513263874.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:35.321Z,1513263875.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:35.689Z,1513263875.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:35.697Z,1513263875.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:36.124Z,1513263876.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:36.486Z,1513263876.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:36.551Z,1513263876.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:36.891Z,1513263876.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:36.932Z,1513263876.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:37.311Z,1513263877.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:37.687Z,1513263877.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:37.709Z,1513263877.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:38.111Z,1513263878.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:38.481Z,1513263878.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:38.552Z,1513263878.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:38.886Z,1513263878.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:38.925Z,1513263878.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:39.317Z,1513263879.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:39.681Z,1513263879.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:39.723Z,1513263879.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:40.165Z,1513263880.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:40.480Z,1513263880.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:40.532Z,1513263880.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:40.885Z,1513263880.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:40.916Z,1513263880.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:41.315Z,1513263881.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:41.681Z,1513263881.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:41.722Z,1513263881.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:42.209Z,1513263882.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:42.477Z,1513263882.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:42.552Z,1513263882.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:42.881Z,1513263882.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:42.916Z,1513263882.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:43.359Z,1513263883.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:43.679Z,1513263883.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:43.742Z,1513263883.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:44.222Z,1513263884.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:44.493Z,1513263884.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:44.508Z,1513263884.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:44.898Z,1513263884.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:44.942Z,1513263884.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:45.327Z,1513263885.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:45.694Z,1513263885.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:45.725Z,1513263885.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:46.173Z,1513263886.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:46.494Z,1513263886.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:46.530Z,1513263886.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:46.897Z,1513263886.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:46.908Z,1513263886.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:47.317Z,1513263887.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:47.693Z,1513263887.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:47.707Z,1513263887.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:48.113Z,1513263888.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:48.490Z,1513263888.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:48.539Z,1513263888.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:48.893Z,1513263888.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:48.934Z,1513263888.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:49.303Z,1513263889.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:49.691Z,1513263889.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:49.706Z,1513263889.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:50.126Z,1513263890.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:50.486Z,1513263890.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:50.550Z,1513263890.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:50.889Z,1513263890.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:50.929Z,1513263890.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:51.329Z,1513263891.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:51.686Z,1513263891.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:51.730Z,1513263891.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:52.111Z,1513263892.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:52.482Z,1513263892.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:52.583Z,1513263892.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:52.891Z,1513263892.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:52.909Z,1513263892.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:53.334Z,1513263893.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:53.686Z,1513263893.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:53.714Z,1513263893.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:54.168Z,1513263894.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:54.481Z,1513263894.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:54.543Z,1513263894.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:54.886Z,1513263894.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:54.947Z,1513263894.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:55.299Z,1513263895.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:55.682Z,1513263895.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:55.715Z,1513263895.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:56.207Z,1513263896.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:56.478Z,1513263896.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:56.527Z,1513263896.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:56.886Z,1513263896.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:56.935Z,1513263896.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:57.322Z,1513263897.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:04:57.681Z,1513263897.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:58.478Z,1513263898.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:58.881Z,1513263898.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:04:59.679Z,1513263899.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:00.473Z,1513263900.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:00.827Z,1513263900.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:00.877Z,1513263900.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:00.946Z,1513263900.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:01.306Z,1513263901.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:01.674Z,1513263901.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:01.708Z,1513263901.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:02.106Z,1513263902.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:02.470Z,1513263902.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:02.511Z,1513263902.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:02.875Z,1513263902.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:02.931Z,1513263902.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:03.325Z,1513263903.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:03.670Z,1513263903.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:03.731Z,1513263903.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:04.151Z,1513263904.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:04.466Z,1513263904.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:04.591Z,1513263904.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:04.885Z,1513263904.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:04.916Z,1513263904.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:05.307Z,1513263905.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:05.682Z,1513263905.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:05.779Z,1513263905.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:06.123Z,1513263906.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:06.479Z,1513263906.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:06.583Z,1513263906.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:06.886Z,1513263906.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:06.927Z,1513263906.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:07.312Z,1513263907.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:07.682Z,1513263907.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:07.687Z,1513263907.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x28373 got:0x54300
2017-12-14T15:05:07.726Z,1513263907.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:08.164Z,1513263908.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:08.477Z,1513263908.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:08.519Z,1513263908.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:08.902Z,1513263908.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:08.977Z,1513263908.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:09.308Z,1513263909.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:09.699Z,1513263909.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:09.728Z,1513263909.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:10.173Z,1513263910.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:10.494Z,1513263910.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:10.525Z,1513263910.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:10.897Z,1513263910.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:10.920Z,1513263910.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:11.313Z,1513263911.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:11.693Z,1513263911.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:11.716Z,1513263911.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:12.187Z,1513263912.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:12.490Z,1513263912.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:12.524Z,1513263912.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:12.893Z,1513263912.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:12.920Z,1513263912.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:13.311Z,1513263913.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:13.694Z,1513263913.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:13.704Z,1513263913.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:14.171Z,1513263914.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:14.490Z,1513263914.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:14.516Z,1513263914.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:14.893Z,1513263914.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:14.951Z,1513263914.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:15.348Z,1513263915.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:15.690Z,1513263915.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:15.716Z,1513263915.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:16.108Z,1513263916.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:16.486Z,1513263916.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:16.511Z,1513263916.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:16.890Z,1513263916.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:16.912Z,1513263916.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:17.295Z,1513263917.295 [PNI_TCM](ERROR): CRC does not match. Expected:0x59209 got:0x49152
2017-12-14T15:05:17.316Z,1513263917.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:17.685Z,1513263917.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:17.712Z,1513263917.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:18.116Z,1513263918.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:18.482Z,1513263918.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:18.581Z,1513263918.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:18.904Z,1513263918.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:18.910Z,1513263918.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:19.306Z,1513263919.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:19.702Z,1513263919.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:19.705Z,1513263919.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:20.107Z,1513263920.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:20.504Z,1513263920.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:20.554Z,1513263920.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:20.910Z,1513263920.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:20.915Z,1513263920.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:21.312Z,1513263921.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:21.705Z,1513263921.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:21.760Z,1513263921.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:22.173Z,1513263922.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:22.502Z,1513263922.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:22.510Z,1513263922.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:22.904Z,1513263922.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:22.905Z,1513263922.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:23.306Z,1513263923.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:23.701Z,1513263923.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:23.709Z,1513263923.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:24.198Z,1513263924.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:24.497Z,1513263924.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:24.530Z,1513263924.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:24.901Z,1513263924.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:24.966Z,1513263924.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:25.302Z,1513263925.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:25.697Z,1513263925.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:25.700Z,1513263925.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:26.163Z,1513263926.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:26.502Z,1513263926.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:26.518Z,1513263926.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:26.906Z,1513263926.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:26.976Z,1513263926.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:27.339Z,1513263927.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:27.701Z,1513263927.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:27.718Z,1513263927.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:28.219Z,1513263928.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:28.498Z,1513263928.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:28.504Z,1513263928.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:28.901Z,1513263928.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:28.947Z,1513263928.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:29.302Z,1513263929.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:29.698Z,1513263929.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:29.707Z,1513263929.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:30.228Z,1513263930.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:30.494Z,1513263930.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:30.530Z,1513263930.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:30.898Z,1513263930.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:30.916Z,1513263930.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:31.308Z,1513263931.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:31.693Z,1513263931.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:31.704Z,1513263931.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:32.108Z,1513263932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:32.490Z,1513263932.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:32.552Z,1513263932.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:32.894Z,1513263932.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:32.911Z,1513263932.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:33.311Z,1513263933.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:33.690Z,1513263933.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:33.712Z,1513263933.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:34.115Z,1513263934.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:34.486Z,1513263934.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:34.577Z,1513263934.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:34.905Z,1513263934.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:34.908Z,1513263934.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:35.311Z,1513263935.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:35.701Z,1513263935.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:35.714Z,1513263935.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:36.186Z,1513263936.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:36.497Z,1513263936.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:36.541Z,1513263936.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:36.901Z,1513263936.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:36.974Z,1513263936.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:37.321Z,1513263937.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:37.697Z,1513263937.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:37.704Z,1513263937.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:38.178Z,1513263938.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:38.501Z,1513263938.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:38.519Z,1513263938.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:38.905Z,1513263938.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:38.920Z,1513263938.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:39.317Z,1513263939.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:39.701Z,1513263939.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:39.721Z,1513263939.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:40.173Z,1513263940.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:40.498Z,1513263940.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:40.520Z,1513263940.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:40.904Z,1513263940.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:40.961Z,1513263940.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:41.331Z,1513263941.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:41.697Z,1513263941.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:41.708Z,1513263941.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:42.215Z,1513263942.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:42.494Z,1513263942.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:42.536Z,1513263942.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:42.898Z,1513263942.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:42.935Z,1513263942.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:43.303Z,1513263943.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:43.693Z,1513263943.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:43.704Z,1513263943.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:44.207Z,1513263944.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:44.495Z,1513263944.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:44.535Z,1513263944.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:44.932Z,1513263944.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:45.290Z,1513263945.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:45.315Z,1513263945.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:45.716Z,1513263945.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:46.086Z,1513263946.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:46.117Z,1513263946.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:46.544Z,1513263946.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:46.882Z,1513263946.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:46.910Z,1513263946.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:47.287Z,1513263947.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:47.326Z,1513263947.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:47.719Z,1513263947.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:48.081Z,1513263948.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:48.114Z,1513263948.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:48.591Z,1513263948.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:48.873Z,1513263948.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:48.927Z,1513263948.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:49.362Z,1513263949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:49.671Z,1513263949.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:49.712Z,1513263949.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:50.198Z,1513263950.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:50.466Z,1513263950.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:50.547Z,1513263950.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:50.869Z,1513263950.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:50.971Z,1513263950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:51.324Z,1513263951.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:51.665Z,1513263951.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:51.730Z,1513263951.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:52.148Z,1513263952.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:52.461Z,1513263952.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:52.507Z,1513263952.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:52.867Z,1513263952.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:52.917Z,1513263952.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:53.303Z,1513263953.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:53.662Z,1513263953.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:53.734Z,1513263953.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:54.200Z,1513263954.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:54.457Z,1513263954.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:54.531Z,1513263954.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:54.862Z,1513263954.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:54.916Z,1513263954.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:55.318Z,1513263955.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:55.657Z,1513263955.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:55.707Z,1513263955.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:56.196Z,1513263956.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:56.205Z,1513263956.205 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:00:56.2Z
2017-12-14T15:05:56.206Z,1513263956.206 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:05:56.206Z,1513263956.206 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:05:56.454Z,1513263956.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:56.520Z,1513263956.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:56.861Z,1513263956.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:57.412Z,1513263957.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:57.562Z,1513263957.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:05:57.657Z,1513263957.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:58.453Z,1513263958.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:58.857Z,1513263958.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:05:59.654Z,1513263959.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:00.451Z,1513263960.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:00.861Z,1513263960.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:01.163Z,1513263961.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:01.246Z,1513263961.246 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0336.lzma
2017-12-14T15:06:01.286Z,1513263961.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:01.657Z,1513263961.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:01.679Z,1513263961.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:02.455Z,1513263962.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:02.794Z,1513263962.794 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0336.lzma.bak
2017-12-14T15:06:02.794Z,1513263962.794 [DataOverHttps](INFO): SBD MOMSN=5439052
2017-12-14T15:06:02.885Z,1513263962.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:03.225Z,1513263963.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:03.840Z,1513263963.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:03.987Z,1513263963.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:04.022Z,1513263964.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:04.517Z,1513263964.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:05.313Z,1513263965.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:06.111Z,1513263966.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:06.533Z,1513263966.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:07.329Z,1513263967.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:07.381Z,1513263967.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:07.523Z,1513263967.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:07.862Z,1513263967.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:08.127Z,1513263968.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:08.271Z,1513263968.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:08.533Z,1513263968.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:08.648Z,1513263968.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:09.076Z,1513263969.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:09.329Z,1513263969.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:10.127Z,1513263970.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:10.533Z,1513263970.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:11.329Z,1513263971.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:12.127Z,1513263972.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:12.585Z,1513263972.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:12.752Z,1513263972.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:12.849Z,1513263972.849 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0337.lzma
2017-12-14T15:06:12.934Z,1513263972.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:13.319Z,1513263973.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:13.381Z,1513263973.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:13.612Z,1513263973.612 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0337.lzma.bak
2017-12-14T15:06:13.612Z,1513263973.612 [DataOverHttps](INFO): SBD MOMSN=5439054
2017-12-14T15:06:13.691Z,1513263973.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:14.179Z,1513263974.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:14.853Z,1513263974.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:15.649Z,1513263975.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:16.447Z,1513263976.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:16.874Z,1513263976.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:17.670Z,1513263977.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:18.466Z,1513263978.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:18.873Z,1513263978.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:19.669Z,1513263979.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:20.466Z,1513263980.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:20.869Z,1513263980.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:21.667Z,1513263981.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:22.462Z,1513263982.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:22.865Z,1513263982.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:23.662Z,1513263983.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:24.457Z,1513263984.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:24.861Z,1513263984.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:25.658Z,1513263985.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:26.454Z,1513263986.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:26.858Z,1513263986.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:27.653Z,1513263987.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:28.473Z,1513263988.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:28.901Z,1513263988.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:29.697Z,1513263989.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:30.493Z,1513263990.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:30.897Z,1513263990.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:31.693Z,1513263991.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:32.489Z,1513263992.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:32.893Z,1513263992.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:33.691Z,1513263993.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:34.486Z,1513263994.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:34.608Z,1513263994.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:34.615Z,1513263994.615 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:06:34.615Z,1513263994.615 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:06:34.615Z,1513263994.615 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:06:34.766Z,1513263994.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:34.890Z,1513263994.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:35.686Z,1513263995.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:36.482Z,1513263996.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:36.887Z,1513263996.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:37.681Z,1513263997.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:38.478Z,1513263998.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:38.882Z,1513263998.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:39.677Z,1513263999.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:39.835Z,1513263999.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:40.018Z,1513264000.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:40.352Z,1513264000.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:40.485Z,1513264000.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:40.750Z,1513264000.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:40.889Z,1513264000.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:41.127Z,1513264001.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:41.522Z,1513264001.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:41.728Z,1513264001.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:41.957Z,1513264001.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:42.340Z,1513264002.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:42.522Z,1513264002.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:42.732Z,1513264002.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:42.926Z,1513264002.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:43.156Z,1513264003.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:43.524Z,1513264003.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:43.722Z,1513264003.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:43.930Z,1513264003.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:44.331Z,1513264004.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:44.518Z,1513264004.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:44.748Z,1513264004.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:44.921Z,1513264004.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:45.148Z,1513264005.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:45.515Z,1513264005.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:45.717Z,1513264005.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:45.950Z,1513264005.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:46.364Z,1513264006.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:46.514Z,1513264006.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:46.759Z,1513264006.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:46.917Z,1513264006.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:47.127Z,1513264007.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:47.522Z,1513264007.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:47.713Z,1513264007.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:47.961Z,1513264007.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:48.340Z,1513264008.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:48.510Z,1513264008.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:48.748Z,1513264008.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:48.914Z,1513264008.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:49.128Z,1513264009.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:49.517Z,1513264009.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:49.709Z,1513264009.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:49.907Z,1513264009.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:50.342Z,1513264010.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:50.506Z,1513264010.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:50.749Z,1513264010.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:50.910Z,1513264010.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:51.150Z,1513264011.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:51.531Z,1513264011.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:51.705Z,1513264011.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:51.955Z,1513264011.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:52.328Z,1513264012.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:52.501Z,1513264012.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:52.767Z,1513264012.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:52.905Z,1513264012.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:53.115Z,1513264013.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:53.521Z,1513264013.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:53.701Z,1513264013.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:53.956Z,1513264013.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:54.331Z,1513264014.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:54.498Z,1513264014.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:54.728Z,1513264014.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:54.902Z,1513264014.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:55.145Z,1513264015.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:55.546Z,1513264015.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:55.698Z,1513264015.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:55.918Z,1513264015.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:56.315Z,1513264016.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:56.494Z,1513264016.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:56.753Z,1513264016.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:56.898Z,1513264016.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:57.123Z,1513264017.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:57.527Z,1513264017.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:57.693Z,1513264017.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:57.924Z,1513264017.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:58.391Z,1513264018.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:58.490Z,1513264018.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:58.732Z,1513264018.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:58.897Z,1513264018.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:59.120Z,1513264019.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:59.602Z,1513264019.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:06:59.693Z,1513264019.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:06:59.951Z,1513264019.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:00.379Z,1513264020.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:00.490Z,1513264020.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:00.740Z,1513264020.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:00.894Z,1513264020.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:01.163Z,1513264021.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:01.508Z,1513264021.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:01.690Z,1513264021.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:01.954Z,1513264021.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:02.393Z,1513264022.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:02.487Z,1513264022.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:02.742Z,1513264022.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:02.898Z,1513264022.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:03.147Z,1513264023.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:03.516Z,1513264023.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:03.693Z,1513264023.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:03.909Z,1513264023.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:04.304Z,1513264024.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:04.489Z,1513264024.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:04.719Z,1513264024.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:04.893Z,1513264024.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:05.108Z,1513264025.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:05.507Z,1513264025.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:05.690Z,1513264025.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:05.942Z,1513264025.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:06.312Z,1513264026.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:06.485Z,1513264026.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:06.743Z,1513264026.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:06.889Z,1513264026.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:07.106Z,1513264027.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:07.515Z,1513264027.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:07.685Z,1513264027.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:07.911Z,1513264027.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:08.308Z,1513264028.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:08.482Z,1513264028.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:08.719Z,1513264028.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:08.887Z,1513264028.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:09.167Z,1513264029.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:09.521Z,1513264029.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:09.681Z,1513264029.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:09.925Z,1513264029.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:10.318Z,1513264030.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:10.478Z,1513264030.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:10.720Z,1513264030.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:10.882Z,1513264030.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:11.117Z,1513264031.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:11.573Z,1513264031.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:11.677Z,1513264031.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:11.939Z,1513264031.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:12.323Z,1513264032.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:12.482Z,1513264032.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:12.794Z,1513264032.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:12.885Z,1513264032.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:13.121Z,1513264033.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:13.519Z,1513264033.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:13.682Z,1513264033.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:13.931Z,1513264033.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:14.307Z,1513264034.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:14.480Z,1513264034.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:14.772Z,1513264034.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:14.886Z,1513264034.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:15.118Z,1513264035.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:15.516Z,1513264035.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:15.682Z,1513264035.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:15.916Z,1513264035.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:16.311Z,1513264036.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:16.477Z,1513264036.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:16.721Z,1513264036.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:16.882Z,1513264036.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:17.123Z,1513264037.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:17.519Z,1513264037.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:17.677Z,1513264037.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:17.971Z,1513264037.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:18.323Z,1513264038.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:18.473Z,1513264038.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:18.728Z,1513264038.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:18.879Z,1513264038.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:19.119Z,1513264039.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:19.511Z,1513264039.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:19.674Z,1513264039.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:19.914Z,1513264039.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:20.327Z,1513264040.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:20.469Z,1513264040.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:20.719Z,1513264040.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:20.873Z,1513264040.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:21.137Z,1513264041.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:21.527Z,1513264041.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:21.669Z,1513264041.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:21.976Z,1513264041.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:22.323Z,1513264042.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:22.466Z,1513264042.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:22.799Z,1513264042.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:22.873Z,1513264042.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:23.119Z,1513264043.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:23.119Z,1513264043.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 291
2017-12-14T15:07:23.119Z,1513264043.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:07:23.121Z,1513264043.121 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:23.121Z,1513264043.121 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 291
2017-12-14T15:07:23.121Z,1513264043.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:07:23.123Z,1513264043.123 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:23.123Z,1513264043.123 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 291
2017-12-14T15:07:23.123Z,1513264043.123 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:07:23.136Z,1513264043.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:07:23.137Z,1513264043.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:07:23.137Z,1513264043.137 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:07:23.534Z,1513264043.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:07:23.534Z,1513264043.534 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 291
2017-12-14T15:07:23.534Z,1513264043.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:07:23.534Z,1513264043.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 291
2017-12-14T15:07:23.535Z,1513264043.535 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:07:23.535Z,1513264043.535 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 291
2017-12-14T15:07:23.669Z,1513264043.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:23.926Z,1513264043.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:07:23.927Z,1513264043.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:07:23.927Z,1513264043.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:07:23.927Z,1513264043.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:07:23.928Z,1513264043.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:07:23.928Z,1513264043.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:07:23.928Z,1513264043.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:07:23.929Z,1513264043.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:07:23.929Z,1513264043.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:07:24.362Z,1513264044.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:24.467Z,1513264044.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:24.747Z,1513264044.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:24.882Z,1513264044.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:25.130Z,1513264045.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:25.523Z,1513264045.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:25.677Z,1513264045.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:25.903Z,1513264045.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:26.333Z,1513264046.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:26.474Z,1513264046.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:26.703Z,1513264046.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:26.879Z,1513264046.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:27.130Z,1513264047.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:27.511Z,1513264047.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:27.674Z,1513264047.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:27.908Z,1513264047.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:28.311Z,1513264048.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:28.469Z,1513264048.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:28.715Z,1513264048.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:28.873Z,1513264048.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:29.112Z,1513264049.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:29.509Z,1513264049.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:29.669Z,1513264049.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:29.921Z,1513264049.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:30.319Z,1513264050.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:30.467Z,1513264050.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:30.736Z,1513264050.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:30.874Z,1513264050.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:31.157Z,1513264051.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:31.512Z,1513264051.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:31.670Z,1513264051.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:31.919Z,1513264051.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:32.318Z,1513264052.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:32.465Z,1513264052.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:32.717Z,1513264052.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:32.869Z,1513264052.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:33.125Z,1513264053.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:33.527Z,1513264053.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:33.666Z,1513264053.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:33.963Z,1513264053.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:34.379Z,1513264054.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:34.465Z,1513264054.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:34.706Z,1513264054.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:34.869Z,1513264054.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:35.120Z,1513264055.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:35.665Z,1513264055.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:36.461Z,1513264056.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:36.866Z,1513264056.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:37.661Z,1513264057.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:38.472Z,1513264058.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:38.693Z,1513264058.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:38.881Z,1513264058.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:38.980Z,1513264058.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:39.196Z,1513264059.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:39.603Z,1513264059.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:39.678Z,1513264059.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:40.002Z,1513264060.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:40.474Z,1513264060.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:40.498Z,1513264060.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:40.802Z,1513264060.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:40.897Z,1513264060.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:41.192Z,1513264061.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:41.594Z,1513264061.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:41.693Z,1513264061.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:42.027Z,1513264062.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:42.395Z,1513264062.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:42.491Z,1513264062.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:42.818Z,1513264062.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:42.897Z,1513264062.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:43.191Z,1513264063.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:43.623Z,1513264063.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:43.694Z,1513264063.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:43.992Z,1513264063.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:44.443Z,1513264064.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:44.489Z,1513264064.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:44.799Z,1513264064.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:44.893Z,1513264064.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:45.182Z,1513264065.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:45.585Z,1513264065.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:45.690Z,1513264065.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:45.989Z,1513264065.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:46.391Z,1513264066.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:46.485Z,1513264066.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:46.788Z,1513264066.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:46.889Z,1513264066.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:47.195Z,1513264067.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:47.597Z,1513264067.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:47.685Z,1513264067.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:48.007Z,1513264068.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:48.390Z,1513264068.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:48.481Z,1513264068.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:48.790Z,1513264068.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:48.887Z,1513264068.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:49.187Z,1513264069.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:49.575Z,1513264069.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:49.684Z,1513264069.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:50.017Z,1513264070.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:50.398Z,1513264070.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:50.477Z,1513264070.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:50.796Z,1513264070.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:50.882Z,1513264070.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:51.177Z,1513264071.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:51.583Z,1513264071.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:51.677Z,1513264071.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:51.979Z,1513264071.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:52.379Z,1513264072.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:52.475Z,1513264072.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:52.834Z,1513264072.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:52.885Z,1513264072.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:53.192Z,1513264073.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:53.603Z,1513264073.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:53.682Z,1513264073.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:54.007Z,1513264074.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:54.390Z,1513264074.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:54.478Z,1513264074.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:54.796Z,1513264074.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:54.881Z,1513264074.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:55.207Z,1513264075.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:55.591Z,1513264075.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:55.679Z,1513264075.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:55.990Z,1513264075.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:56.464Z,1513264076.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:56.474Z,1513264076.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:56.787Z,1513264076.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:56.877Z,1513264076.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:57.187Z,1513264077.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:57.589Z,1513264077.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:57.673Z,1513264077.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:58.038Z,1513264078.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:58.394Z,1513264078.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:58.469Z,1513264078.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:58.791Z,1513264078.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:58.875Z,1513264078.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:59.197Z,1513264079.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:59.643Z,1513264079.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:07:59.669Z,1513264079.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:07:59.000Z,1513264080.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:00.411Z,1513264080.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:00.465Z,1513264080.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:00.795Z,1513264080.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:00.871Z,1513264080.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:01.186Z,1513264081.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:01.588Z,1513264081.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:01.665Z,1513264081.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:01.996Z,1513264081.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:02.420Z,1513264082.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:02.462Z,1513264082.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:02.820Z,1513264082.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:02.874Z,1513264082.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:03.185Z,1513264083.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:03.590Z,1513264083.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:03.669Z,1513264083.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:03.985Z,1513264083.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:04.397Z,1513264084.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:04.465Z,1513264084.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:04.808Z,1513264084.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:04.869Z,1513264084.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:05.203Z,1513264085.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:05.632Z,1513264085.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:05.686Z,1513264085.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:06.118Z,1513264086.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:06.472Z,1513264086.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:06.482Z,1513264086.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:06.795Z,1513264086.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:06.889Z,1513264086.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:07.179Z,1513264087.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:07.580Z,1513264087.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:07.688Z,1513264087.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:08.002Z,1513264088.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:08.470Z,1513264088.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:08.482Z,1513264088.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:08.792Z,1513264088.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:08.885Z,1513264088.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:09.183Z,1513264089.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:09.589Z,1513264089.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:09.682Z,1513264089.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:09.984Z,1513264089.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:10.388Z,1513264090.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:10.477Z,1513264090.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:10.782Z,1513264090.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:10.881Z,1513264090.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:11.185Z,1513264091.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:11.587Z,1513264091.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:11.678Z,1513264091.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:12.019Z,1513264092.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:12.416Z,1513264092.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:12.474Z,1513264092.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:12.779Z,1513264092.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:13.206Z,1513264093.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:13.269Z,1513264093.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:13.598Z,1513264093.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:13.673Z,1513264093.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:14.008Z,1513264094.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:14.388Z,1513264094.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:14.469Z,1513264094.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:14.827Z,1513264094.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:14.875Z,1513264094.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:15.179Z,1513264095.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:15.582Z,1513264095.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:15.669Z,1513264095.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:15.982Z,1513264095.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:16.390Z,1513264096.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:16.465Z,1513264096.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:16.783Z,1513264096.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:16.870Z,1513264096.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:17.205Z,1513264097.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:17.596Z,1513264097.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:17.665Z,1513264097.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:17.985Z,1513264097.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:18.383Z,1513264098.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:18.462Z,1513264098.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:18.791Z,1513264098.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:18.869Z,1513264098.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:19.191Z,1513264099.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:19.595Z,1513264099.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:19.665Z,1513264099.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:20.001Z,1513264100.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:20.400Z,1513264100.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:20.463Z,1513264100.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:20.799Z,1513264100.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:20.882Z,1513264100.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:21.204Z,1513264101.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:21.575Z,1513264101.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:21.677Z,1513264101.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:21.984Z,1513264101.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:22.474Z,1513264102.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:22.505Z,1513264102.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:22.784Z,1513264102.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:22.879Z,1513264102.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:23.198Z,1513264103.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:23.597Z,1513264103.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:23.673Z,1513264103.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:23.995Z,1513264103.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:24.393Z,1513264104.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:24.469Z,1513264104.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:24.790Z,1513264104.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:24.873Z,1513264104.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:25.189Z,1513264105.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:25.607Z,1513264105.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:25.669Z,1513264105.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:26.012Z,1513264106.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:26.395Z,1513264106.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:26.467Z,1513264106.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:26.838Z,1513264106.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:26.873Z,1513264106.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:27.234Z,1513264107.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:27.589Z,1513264107.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:27.669Z,1513264107.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:27.987Z,1513264107.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:28.425Z,1513264108.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:28.478Z,1513264108.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:28.833Z,1513264108.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:28.882Z,1513264108.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:29.239Z,1513264109.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:29.605Z,1513264109.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:29.677Z,1513264109.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:30.001Z,1513264110.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:30.384Z,1513264110.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:30.473Z,1513264110.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:30.783Z,1513264110.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:30.879Z,1513264110.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:31.183Z,1513264111.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:31.584Z,1513264111.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:31.673Z,1513264111.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:31.996Z,1513264111.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:32.388Z,1513264112.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:32.469Z,1513264112.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:32.795Z,1513264112.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:32.873Z,1513264112.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:33.183Z,1513264113.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:33.587Z,1513264113.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:33.669Z,1513264113.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:33.995Z,1513264113.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:34.389Z,1513264114.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:34.471Z,1513264114.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:34.786Z,1513264114.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:34.881Z,1513264114.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:35.202Z,1513264115.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:35.683Z,1513264115.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:36.479Z,1513264116.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:36.882Z,1513264116.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:37.680Z,1513264117.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:38.474Z,1513264118.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:38.738Z,1513264118.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:38.878Z,1513264118.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:38.892Z,1513264118.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:39.214Z,1513264119.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:39.617Z,1513264119.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:39.673Z,1513264119.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:40.016Z,1513264120.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:40.421Z,1513264120.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:40.469Z,1513264120.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:40.825Z,1513264120.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:40.873Z,1513264120.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:41.228Z,1513264121.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:41.667Z,1513264121.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:41.669Z,1513264121.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:42.023Z,1513264122.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:42.418Z,1513264122.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:42.467Z,1513264122.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:42.832Z,1513264122.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:42.873Z,1513264122.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:43.237Z,1513264123.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:43.628Z,1513264123.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:43.669Z,1513264123.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:44.027Z,1513264124.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:44.435Z,1513264124.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:44.465Z,1513264124.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:44.869Z,1513264124.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:44.878Z,1513264124.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:45.243Z,1513264125.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:45.635Z,1513264125.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:45.681Z,1513264125.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:46.022Z,1513264126.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:46.438Z,1513264126.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:46.477Z,1513264126.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:46.843Z,1513264126.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:46.882Z,1513264126.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:47.243Z,1513264127.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:47.635Z,1513264127.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:47.677Z,1513264127.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:48.047Z,1513264128.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:48.476Z,1513264128.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:48.496Z,1513264128.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:48.830Z,1513264128.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:48.889Z,1513264128.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:49.235Z,1513264129.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:49.623Z,1513264129.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:49.689Z,1513264129.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:50.018Z,1513264130.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:50.486Z,1513264130.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:50.511Z,1513264130.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:50.873Z,1513264130.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:50.889Z,1513264130.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:51.249Z,1513264131.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:51.659Z,1513264131.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:51.689Z,1513264131.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:52.015Z,1513264132.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:52.432Z,1513264132.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:52.485Z,1513264132.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:52.826Z,1513264132.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:52.890Z,1513264132.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:53.231Z,1513264133.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:53.626Z,1513264133.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:53.685Z,1513264133.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:54.020Z,1513264134.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:54.411Z,1513264134.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:54.483Z,1513264134.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:54.821Z,1513264134.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:54.893Z,1513264134.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:55.233Z,1513264135.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:55.636Z,1513264135.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:55.689Z,1513264135.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:56.036Z,1513264136.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:56.411Z,1513264136.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:56.485Z,1513264136.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:56.818Z,1513264136.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:56.889Z,1513264136.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:57.219Z,1513264137.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:57.660Z,1513264137.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:57.687Z,1513264137.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:58.024Z,1513264138.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:58.426Z,1513264138.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:58.481Z,1513264138.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:58.828Z,1513264138.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:58.885Z,1513264138.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:08:59.216Z,1513264139.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:59.619Z,1513264139.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:08:59.682Z,1513264139.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:00.023Z,1513264140.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:00.419Z,1513264140.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:00.478Z,1513264140.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:00.867Z,1513264140.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:00.883Z,1513264140.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:01.226Z,1513264141.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:01.630Z,1513264141.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:01.677Z,1513264141.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:02.028Z,1513264142.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:02.402Z,1513264142.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:02.474Z,1513264142.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:02.824Z,1513264142.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:02.879Z,1513264142.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:03.215Z,1513264143.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:03.612Z,1513264143.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:03.673Z,1513264143.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:04.059Z,1513264144.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:04.470Z,1513264144.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:04.491Z,1513264144.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:04.835Z,1513264144.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:04.905Z,1513264144.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:05.217Z,1513264145.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:05.619Z,1513264145.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:05.702Z,1513264145.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:06.024Z,1513264146.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:06.419Z,1513264146.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:06.497Z,1513264146.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:06.819Z,1513264146.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:06.901Z,1513264146.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:07.307Z,1513264147.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:07.623Z,1513264147.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:07.697Z,1513264147.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:08.043Z,1513264148.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:08.410Z,1513264148.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:08.493Z,1513264148.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:08.819Z,1513264148.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:08.897Z,1513264148.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:09.218Z,1513264149.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:09.623Z,1513264149.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:09.693Z,1513264149.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:10.025Z,1513264150.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:10.451Z,1513264150.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:10.491Z,1513264150.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:10.832Z,1513264150.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:10.897Z,1513264150.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:11.227Z,1513264151.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:11.631Z,1513264151.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:11.693Z,1513264151.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:12.006Z,1513264152.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:12.412Z,1513264152.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:12.489Z,1513264152.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:12.883Z,1513264152.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:12.893Z,1513264152.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:13.220Z,1513264153.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:13.671Z,1513264153.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:13.691Z,1513264153.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:14.011Z,1513264154.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:14.447Z,1513264154.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:14.485Z,1513264154.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:14.814Z,1513264154.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:14.889Z,1513264154.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:15.227Z,1513264155.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:15.620Z,1513264155.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:15.685Z,1513264155.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:16.027Z,1513264156.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:16.481Z,1513264156.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:16.491Z,1513264156.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:16.820Z,1513264156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:16.887Z,1513264156.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:17.218Z,1513264157.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:17.614Z,1513264157.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:17.681Z,1513264157.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:18.023Z,1513264158.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:18.477Z,1513264158.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:18.503Z,1513264158.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:18.827Z,1513264158.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:18.882Z,1513264158.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:19.221Z,1513264159.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:19.613Z,1513264159.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:19.677Z,1513264159.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:20.130Z,1513264160.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:20.420Z,1513264160.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:20.475Z,1513264160.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:20.835Z,1513264160.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:20.885Z,1513264160.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:21.236Z,1513264161.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:21.639Z,1513264161.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:21.682Z,1513264161.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:22.012Z,1513264162.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:22.419Z,1513264162.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:22.477Z,1513264162.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:22.874Z,1513264162.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:22.881Z,1513264162.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:22.888Z,1513264162.888 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:09:23.227Z,1513264163.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:23.627Z,1513264163.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:23.679Z,1513264163.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:24.021Z,1513264164.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:24.418Z,1513264164.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:24.473Z,1513264164.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:24.816Z,1513264164.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:24.877Z,1513264164.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:25.221Z,1513264165.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:25.627Z,1513264165.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:25.674Z,1513264165.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:26.018Z,1513264166.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:26.472Z,1513264166.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:26.473Z,1513264166.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:26.820Z,1513264166.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:26.878Z,1513264166.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:27.231Z,1513264167.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:27.634Z,1513264167.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:27.674Z,1513264167.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:28.013Z,1513264168.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:28.436Z,1513264168.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:28.485Z,1513264168.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:28.834Z,1513264168.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:28.889Z,1513264168.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:29.240Z,1513264169.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:29.644Z,1513264169.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:29.688Z,1513264169.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:30.023Z,1513264170.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:30.482Z,1513264170.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:30.494Z,1513264170.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:30.821Z,1513264170.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:30.885Z,1513264170.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:31.226Z,1513264171.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:31.627Z,1513264171.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:31.682Z,1513264171.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:32.019Z,1513264172.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:32.477Z,1513264172.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:32.486Z,1513264172.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:32.866Z,1513264172.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:32.888Z,1513264172.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:33.229Z,1513264173.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:33.639Z,1513264173.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:33.682Z,1513264173.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:34.008Z,1513264174.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:34.477Z,1513264174.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:34.506Z,1513264174.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:34.818Z,1513264174.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:34.881Z,1513264174.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:35.239Z,1513264175.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:35.677Z,1513264175.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:36.482Z,1513264176.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:36.885Z,1513264176.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:37.682Z,1513264177.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:38.477Z,1513264178.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:38.790Z,1513264178.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:38.881Z,1513264178.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:38.912Z,1513264178.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:39.343Z,1513264179.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:39.663Z,1513264179.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:39.679Z,1513264179.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:40.098Z,1513264180.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:40.466Z,1513264180.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:40.474Z,1513264180.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:40.877Z,1513264180.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:40.878Z,1513264180.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:41.282Z,1513264181.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:41.673Z,1513264181.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:41.680Z,1513264181.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:42.069Z,1513264182.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:42.469Z,1513264182.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:42.491Z,1513264182.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:42.875Z,1513264182.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:42.899Z,1513264182.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:43.276Z,1513264183.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:43.669Z,1513264183.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:43.671Z,1513264183.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:44.067Z,1513264184.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:44.467Z,1513264184.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:44.551Z,1513264184.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:44.886Z,1513264184.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:44.904Z,1513264184.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:45.266Z,1513264185.266 [PNI_TCM](ERROR): CRC does not match. Expected:0x15165 got:0x33043
2017-12-14T15:09:45.283Z,1513264185.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:45.686Z,1513264185.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:45.713Z,1513264185.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:46.059Z,1513264186.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:46.482Z,1513264186.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:46.520Z,1513264186.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:46.881Z,1513264186.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:46.885Z,1513264186.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:47.291Z,1513264187.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:47.681Z,1513264187.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:47.718Z,1513264187.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:48.052Z,1513264188.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:48.474Z,1513264188.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:48.517Z,1513264188.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:48.895Z,1513264188.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:48.922Z,1513264188.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:49.272Z,1513264189.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:49.678Z,1513264189.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:49.717Z,1513264189.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:50.141Z,1513264190.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:50.499Z,1513264190.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:50.514Z,1513264190.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:50.893Z,1513264190.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:50.917Z,1513264190.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:51.260Z,1513264191.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:51.672Z,1513264191.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:51.713Z,1513264191.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:52.161Z,1513264192.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:52.463Z,1513264192.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:52.509Z,1513264192.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:52.913Z,1513264192.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:52.916Z,1513264192.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:53.278Z,1513264193.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:53.703Z,1513264193.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:53.709Z,1513264193.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:54.065Z,1513264194.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:54.463Z,1513264194.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:54.506Z,1513264194.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:54.869Z,1513264194.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:54.910Z,1513264194.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:55.266Z,1513264195.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:55.663Z,1513264195.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:55.705Z,1513264195.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:56.097Z,1513264196.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:56.488Z,1513264196.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:56.502Z,1513264196.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:56.896Z,1513264196.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:56.905Z,1513264196.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:57.273Z,1513264197.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:57.683Z,1513264197.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:57.701Z,1513264197.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:58.075Z,1513264198.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:58.497Z,1513264198.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:58.556Z,1513264198.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:58.890Z,1513264198.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:58.901Z,1513264198.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:09:59.319Z,1513264199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:59.681Z,1513264199.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:09:59.697Z,1513264199.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:00.111Z,1513264200.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:00.494Z,1513264200.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:00.552Z,1513264200.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:00.897Z,1513264200.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:00.904Z,1513264200.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:01.286Z,1513264201.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:01.656Z,1513264201.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:01.694Z,1513264201.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:02.114Z,1513264202.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:02.485Z,1513264202.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:02.489Z,1513264202.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:02.891Z,1513264202.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:02.893Z,1513264202.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:03.275Z,1513264203.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:03.643Z,1513264203.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:03.689Z,1513264203.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:04.125Z,1513264204.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:04.465Z,1513264204.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:04.485Z,1513264204.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:04.890Z,1513264204.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:04.904Z,1513264204.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:05.264Z,1513264205.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:05.675Z,1513264205.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:05.685Z,1513264205.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:06.062Z,1513264206.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:06.469Z,1513264206.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:06.483Z,1513264206.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:06.867Z,1513264206.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:06.905Z,1513264206.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:07.275Z,1513264207.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:07.672Z,1513264207.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:07.701Z,1513264207.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:08.131Z,1513264208.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:08.497Z,1513264208.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:08.519Z,1513264208.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:08.892Z,1513264208.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:08.901Z,1513264208.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:09.306Z,1513264209.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:09.669Z,1513264209.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:09.697Z,1513264209.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:10.064Z,1513264210.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:10.476Z,1513264210.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:10.493Z,1513264210.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:10.883Z,1513264210.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:10.898Z,1513264210.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:11.295Z,1513264211.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:11.694Z,1513264211.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:11.746Z,1513264211.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:12.074Z,1513264212.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:12.490Z,1513264212.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:12.540Z,1513264212.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:12.891Z,1513264212.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:12.893Z,1513264212.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:13.259Z,1513264213.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:13.655Z,1513264213.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:13.689Z,1513264213.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:14.027Z,1513264214.027 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T15:10:14.027Z,1513264214.027 [NAL9602] Data Fault, FailCount= 5
2017-12-14T15:10:14.027Z,1513264214.027 [NAL9602](ERROR): Data Fault
2017-12-14T15:10:14.066Z,1513264214.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:14.131Z,1513264214.131 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T15:10:14.131Z,1513264214.131 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T15:10:14.487Z,1513264214.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:14.494Z,1513264214.494 [NAL9602](INFO): Powering down
2017-12-14T15:10:14.550Z,1513264214.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:14.574Z,1513264214.574 [CBIT](INFO): Critical error at 20171214T151014
2017-12-14T15:10:14.893Z,1513264214.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:14.900Z,1513264214.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:15.259Z,1513264215.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:15.664Z,1513264215.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:15.689Z,1513264215.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:16.121Z,1513264216.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:16.457Z,1513264216.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:16.486Z,1513264216.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:16.857Z,1513264216.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:16.889Z,1513264216.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:17.267Z,1513264217.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:17.658Z,1513264217.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:17.686Z,1513264217.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:18.175Z,1513264218.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:18.479Z,1513264218.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:18.489Z,1513264218.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:18.868Z,1513264218.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:18.893Z,1513264218.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:19.261Z,1513264219.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:19.689Z,1513264219.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:19.719Z,1513264219.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:20.127Z,1513264220.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:20.481Z,1513264220.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:20.485Z,1513264220.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:20.874Z,1513264220.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:20.890Z,1513264220.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:21.286Z,1513264221.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:21.667Z,1513264221.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:21.685Z,1513264221.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:22.151Z,1513264222.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:22.483Z,1513264222.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:22.507Z,1513264222.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:22.863Z,1513264222.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:22.905Z,1513264222.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:23.302Z,1513264223.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:23.669Z,1513264223.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:23.702Z,1513264223.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:24.059Z,1513264224.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:24.060Z,1513264224.060 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 292
2017-12-14T15:10:24.060Z,1513264224.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:10:24.061Z,1513264224.061 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:24.061Z,1513264224.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 292
2017-12-14T15:10:24.062Z,1513264224.062 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:10:24.063Z,1513264224.063 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:24.063Z,1513264224.063 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 292
2017-12-14T15:10:24.064Z,1513264224.064 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:10:24.075Z,1513264224.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:10:24.075Z,1513264224.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:10:24.076Z,1513264224.076 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:10:24.498Z,1513264224.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:24.515Z,1513264224.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:10:24.516Z,1513264224.516 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 292
2017-12-14T15:10:24.516Z,1513264224.516 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:10:24.516Z,1513264224.516 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 292
2017-12-14T15:10:24.522Z,1513264224.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:10:24.523Z,1513264224.523 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 292
2017-12-14T15:10:24.872Z,1513264224.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:10:24.873Z,1513264224.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:10:24.873Z,1513264224.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:10:24.874Z,1513264224.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:10:24.874Z,1513264224.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:10:24.874Z,1513264224.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:10:24.875Z,1513264224.875 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:10:24.875Z,1513264224.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:10:24.876Z,1513264224.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:10:24.901Z,1513264224.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:25.264Z,1513264225.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:25.660Z,1513264225.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:25.697Z,1513264225.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:26.057Z,1513264226.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:26.494Z,1513264226.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:26.528Z,1513264226.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:26.870Z,1513264226.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:26.897Z,1513264226.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:27.271Z,1513264227.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:27.693Z,1513264227.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:27.710Z,1513264227.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:28.061Z,1513264228.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:28.490Z,1513264228.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:28.525Z,1513264228.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:28.867Z,1513264228.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:28.909Z,1513264228.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:10:29.265Z,1513264229.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:29.652Z,1513264229.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:30.053Z,1513264230.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:30.467Z,1513264230.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:30.908Z,1513264230.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:31.260Z,1513264231.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:31.687Z,1513264231.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:32.125Z,1513264232.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:32.471Z,1513264232.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:32.874Z,1513264232.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:33.255Z,1513264233.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:33.658Z,1513264233.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:34.190Z,1513264234.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:34.477Z,1513264234.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:34.870Z,1513264234.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:35.275Z,1513264235.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:38.815Z,1513264238.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:38.931Z,1513264238.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:39.311Z,1513264239.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:39.715Z,1513264239.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:40.112Z,1513264240.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:40.547Z,1513264240.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:40.894Z,1513264240.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:41.297Z,1513264241.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:41.699Z,1513264241.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:42.123Z,1513264242.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:42.555Z,1513264242.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:42.896Z,1513264242.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:43.315Z,1513264243.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:43.751Z,1513264243.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:44.162Z,1513264244.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:44.500Z,1513264244.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:44.931Z,1513264244.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:45.297Z,1513264245.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:45.736Z,1513264245.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:46.153Z,1513264246.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:46.515Z,1513264246.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:46.935Z,1513264246.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:47.302Z,1513264247.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:47.688Z,1513264247.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:48.168Z,1513264248.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:48.490Z,1513264248.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:48.896Z,1513264248.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:49.292Z,1513264249.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:49.719Z,1513264249.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:50.210Z,1513264250.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:50.509Z,1513264250.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:50.896Z,1513264250.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:51.304Z,1513264251.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:51.694Z,1513264251.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:52.098Z,1513264252.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:52.513Z,1513264252.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:52.912Z,1513264252.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:53.287Z,1513264253.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:53.692Z,1513264253.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:54.112Z,1513264254.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:54.546Z,1513264254.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:54.894Z,1513264254.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:55.294Z,1513264255.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:55.693Z,1513264255.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:56.118Z,1513264256.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:56.582Z,1513264256.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:56.894Z,1513264256.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:57.296Z,1513264257.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:57.704Z,1513264257.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:58.151Z,1513264258.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:58.508Z,1513264258.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:58.908Z,1513264258.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:59.302Z,1513264259.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:10:59.700Z,1513264259.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:00.168Z,1513264260.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:00.476Z,1513264260.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:00.906Z,1513264260.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:01.301Z,1513264261.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:01.702Z,1513264261.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:02.161Z,1513264262.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:02.519Z,1513264262.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:02.947Z,1513264262.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:03.298Z,1513264263.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:03.692Z,1513264263.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:04.156Z,1513264264.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:04.515Z,1513264264.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:04.904Z,1513264264.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:05.331Z,1513264265.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:05.711Z,1513264265.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:06.224Z,1513264266.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:06.496Z,1513264266.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:06.898Z,1513264266.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:07.335Z,1513264267.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:07.703Z,1513264267.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:08.142Z,1513264268.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:08.545Z,1513264268.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:08.905Z,1513264268.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:09.300Z,1513264269.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:09.704Z,1513264269.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:10.081Z,1513264270.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:10.547Z,1513264270.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:10.893Z,1513264270.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:11.296Z,1513264271.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:11.695Z,1513264271.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:12.175Z,1513264272.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:12.539Z,1513264272.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:12.891Z,1513264272.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:13.293Z,1513264273.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:13.715Z,1513264273.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:14.138Z,1513264274.138 [PNI_TCM](ERROR): CRC does not match. Expected:0x13779 got:0x16896
2017-12-14T15:11:14.168Z,1513264274.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:14.511Z,1513264274.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:14.895Z,1513264274.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:15.299Z,1513264275.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:15.770Z,1513264275.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:16.170Z,1513264276.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:16.506Z,1513264276.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:16.896Z,1513264276.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:17.308Z,1513264277.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:17.721Z,1513264277.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:18.209Z,1513264278.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:18.518Z,1513264278.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:18.966Z,1513264278.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:19.332Z,1513264279.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:19.720Z,1513264279.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:20.196Z,1513264280.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:20.527Z,1513264280.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:20.935Z,1513264280.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:21.303Z,1513264281.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:21.727Z,1513264281.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:22.132Z,1513264282.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:22.524Z,1513264282.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:22.955Z,1513264282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:23.340Z,1513264283.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:23.751Z,1513264283.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:24.115Z,1513264284.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:24.566Z,1513264284.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:24.923Z,1513264284.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:25.359Z,1513264285.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:25.754Z,1513264285.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:26.203Z,1513264286.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:26.550Z,1513264286.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:26.914Z,1513264286.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:27.340Z,1513264287.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:27.720Z,1513264287.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:28.231Z,1513264288.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:28.516Z,1513264288.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:28.908Z,1513264288.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:29.351Z,1513264289.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:29.719Z,1513264289.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:30.283Z,1513264290.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:30.490Z,1513264290.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:30.890Z,1513264290.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:31.305Z,1513264291.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:31.736Z,1513264291.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:32.185Z,1513264292.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:32.529Z,1513264292.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:32.920Z,1513264292.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:33.330Z,1513264293.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:33.716Z,1513264293.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:34.144Z,1513264294.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:34.526Z,1513264294.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:34.927Z,1513264294.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:34.934Z,1513264294.934 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:11:34.935Z,1513264294.935 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:11:34.935Z,1513264294.935 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:11:34.935Z,1513264294.935 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:11:35.304Z,1513264295.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:35.320Z,1513264295.320 [Default:CheckIn:D] Stopped
2017-12-14T15:11:35.320Z,1513264295.320 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:11:42.866Z,1513264302.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:42.881Z,1513264302.881 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 878.332161 min 
2017-12-14T15:11:42.881Z,1513264302.881 [Default:CheckIn:E] Stopped
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn] Stopped
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn](INFO): Running loop #85
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn] Running Loop=85
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:11:42.882Z,1513264302.882 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:11:43.055Z,1513264303.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:43.408Z,1513264303.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:43.831Z,1513264303.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:44.207Z,1513264304.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:44.630Z,1513264304.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:45.008Z,1513264305.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:45.411Z,1513264305.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:45.864Z,1513264305.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:46.247Z,1513264306.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:46.624Z,1513264306.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:47.047Z,1513264307.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:47.443Z,1513264307.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:47.814Z,1513264307.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:48.247Z,1513264308.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:48.627Z,1513264308.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:49.028Z,1513264309.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:49.423Z,1513264309.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:49.839Z,1513264309.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:50.208Z,1513264310.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:50.615Z,1513264310.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:51.019Z,1513264311.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:51.413Z,1513264311.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:51.666Z,1513264311.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:51.813Z,1513264311.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:52.267Z,1513264312.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:52.463Z,1513264312.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:52.668Z,1513264312.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:52.889Z,1513264312.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:53.111Z,1513264313.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:53.453Z,1513264313.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:53.687Z,1513264313.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:53.831Z,1513264313.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:54.212Z,1513264314.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:54.481Z,1513264314.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:54.613Z,1513264314.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:54.885Z,1513264314.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:11:55.034Z,1513264315.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:55.413Z,1513264315.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:55.887Z,1513264315.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:56.209Z,1513264316.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:56.671Z,1513264316.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:57.018Z,1513264317.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:57.395Z,1513264317.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:57.798Z,1513264317.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:58.193Z,1513264318.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:58.599Z,1513264318.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:59.042Z,1513264319.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:59.403Z,1513264319.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:11:59.802Z,1513264319.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:00.231Z,1513264320.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:00.608Z,1513264320.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:01.007Z,1513264321.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:01.402Z,1513264321.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:01.802Z,1513264321.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:02.282Z,1513264322.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:02.610Z,1513264322.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:02.999Z,1513264322.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:03.403Z,1513264323.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:03.800Z,1513264323.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:04.201Z,1513264324.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:04.604Z,1513264324.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:05.031Z,1513264325.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:05.466Z,1513264325.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:05.805Z,1513264325.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:06.201Z,1513264326.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:06.602Z,1513264326.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:07.005Z,1513264327.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:07.404Z,1513264327.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:07.804Z,1513264327.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:08.202Z,1513264328.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:08.644Z,1513264328.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:09.011Z,1513264329.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:09.407Z,1513264329.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:09.801Z,1513264329.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:10.211Z,1513264330.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:10.606Z,1513264330.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:11.007Z,1513264331.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:11.407Z,1513264331.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:11.872Z,1513264331.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:12.213Z,1513264332.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:12.611Z,1513264332.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:13.009Z,1513264333.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:13.404Z,1513264333.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:13.813Z,1513264333.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:14.216Z,1513264334.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:14.230Z,1513264334.230 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T15:12:14.230Z,1513264334.230 [NAL9602] No Fault, FailCount= 5
2017-12-14T15:12:14.566Z,1513264334.566 [NAL9602](INFO): Powering up NAL9602
2017-12-14T15:12:14.619Z,1513264334.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:15.050Z,1513264335.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:15.403Z,1513264335.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:15.858Z,1513264335.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:16.246Z,1513264336.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:16.604Z,1513264336.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:17.028Z,1513264337.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:17.411Z,1513264337.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:17.810Z,1513264337.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:18.301Z,1513264338.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:18.606Z,1513264338.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:19.049Z,1513264339.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:19.401Z,1513264339.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:19.816Z,1513264339.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:20.209Z,1513264340.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:20.607Z,1513264340.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:21.051Z,1513264341.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:21.474Z,1513264341.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:21.807Z,1513264341.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:22.215Z,1513264342.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:22.608Z,1513264342.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:23.013Z,1513264343.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:23.413Z,1513264343.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:23.805Z,1513264343.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:24.193Z,1513264344.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:24.656Z,1513264344.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:25.019Z,1513264345.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:25.362Z,1513264345.362 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:12:25.394Z,1513264345.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:25.819Z,1513264345.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:26.228Z,1513264346.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:26.629Z,1513264346.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:27.008Z,1513264347.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:27.439Z,1513264347.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:27.849Z,1513264347.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:28.207Z,1513264348.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:28.602Z,1513264348.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:29.008Z,1513264349.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:29.412Z,1513264349.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:29.809Z,1513264349.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:30.245Z,1513264350.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:30.607Z,1513264350.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:31.046Z,1513264351.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:31.403Z,1513264351.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:31.813Z,1513264351.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:32.212Z,1513264352.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:32.639Z,1513264352.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:33.007Z,1513264353.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:33.405Z,1513264353.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:33.813Z,1513264353.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:34.251Z,1513264354.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:34.617Z,1513264354.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:35.016Z,1513264355.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:35.408Z,1513264355.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:39.008Z,1513264359.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:39.167Z,1513264359.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:39.524Z,1513264359.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:39.903Z,1513264359.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:40.349Z,1513264360.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:40.707Z,1513264360.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:41.115Z,1513264361.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:41.474Z,1513264361.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:41.900Z,1513264361.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:42.300Z,1513264362.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:42.707Z,1513264362.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:43.072Z,1513264363.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:43.473Z,1513264363.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:43.907Z,1513264363.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:44.279Z,1513264364.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:44.679Z,1513264364.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:45.107Z,1513264365.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:45.496Z,1513264365.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:45.908Z,1513264365.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:46.276Z,1513264366.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:46.680Z,1513264366.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:47.159Z,1513264367.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:47.479Z,1513264367.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:47.910Z,1513264367.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:48.287Z,1513264368.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:48.687Z,1513264368.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:49.081Z,1513264369.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:49.508Z,1513264369.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:49.886Z,1513264369.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:50.331Z,1513264370.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:50.691Z,1513264370.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:51.080Z,1513264371.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:51.484Z,1513264371.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:51.882Z,1513264371.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:52.280Z,1513264372.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:52.678Z,1513264372.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:53.091Z,1513264373.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:53.515Z,1513264373.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:53.891Z,1513264373.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:54.278Z,1513264374.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:54.682Z,1513264374.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:55.093Z,1513264375.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:55.482Z,1513264375.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:55.888Z,1513264375.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:56.293Z,1513264376.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:56.718Z,1513264376.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:57.086Z,1513264377.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:57.483Z,1513264377.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:57.899Z,1513264377.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:58.295Z,1513264378.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:58.687Z,1513264378.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:59.106Z,1513264379.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:59.480Z,1513264379.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:12:59.928Z,1513264379.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:00.303Z,1513264380.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:00.690Z,1513264380.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:01.086Z,1513264381.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:01.523Z,1513264381.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:01.947Z,1513264381.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:02.303Z,1513264382.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:02.727Z,1513264382.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:03.098Z,1513264383.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:03.507Z,1513264383.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:03.894Z,1513264383.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:04.286Z,1513264384.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:04.671Z,1513264384.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:05.097Z,1513264385.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:05.504Z,1513264385.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:05.895Z,1513264385.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:06.362Z,1513264386.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:06.680Z,1513264386.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:07.088Z,1513264387.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:07.484Z,1513264387.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:07.894Z,1513264387.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:08.299Z,1513264388.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:08.692Z,1513264388.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:09.087Z,1513264389.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:09.504Z,1513264389.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:09.887Z,1513264389.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:10.287Z,1513264390.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:10.689Z,1513264390.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:11.094Z,1513264391.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:11.502Z,1513264391.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:11.931Z,1513264391.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:12.287Z,1513264392.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:12.707Z,1513264392.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:13.087Z,1513264393.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:13.496Z,1513264393.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:13.899Z,1513264393.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:14.300Z,1513264394.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:14.697Z,1513264394.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:15.095Z,1513264395.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:15.493Z,1513264395.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:15.947Z,1513264395.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:16.271Z,1513264396.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:16.683Z,1513264396.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:17.105Z,1513264397.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:17.504Z,1513264397.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:17.896Z,1513264397.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:18.276Z,1513264398.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:18.677Z,1513264398.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:19.129Z,1513264399.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:19.484Z,1513264399.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:19.888Z,1513264399.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:20.284Z,1513264400.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:20.719Z,1513264400.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:21.081Z,1513264401.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:21.476Z,1513264401.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:21.878Z,1513264401.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:22.310Z,1513264402.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:22.686Z,1513264402.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:23.097Z,1513264403.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:23.496Z,1513264403.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:23.958Z,1513264403.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:24.285Z,1513264404.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:24.686Z,1513264404.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:25.126Z,1513264405.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:25.126Z,1513264405.126 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 293
2017-12-14T15:13:25.126Z,1513264405.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:13:25.128Z,1513264405.128 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:25.128Z,1513264405.128 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 293
2017-12-14T15:13:25.128Z,1513264405.128 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:13:25.130Z,1513264405.130 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:25.130Z,1513264405.130 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 293
2017-12-14T15:13:25.130Z,1513264405.130 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:13:25.143Z,1513264405.143 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:13:25.143Z,1513264405.143 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:13:25.143Z,1513264405.143 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:13:25.548Z,1513264405.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:13:25.548Z,1513264405.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 293
2017-12-14T15:13:25.548Z,1513264405.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:13:25.548Z,1513264405.548 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 293
2017-12-14T15:13:25.549Z,1513264405.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:13:25.549Z,1513264405.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 293
2017-12-14T15:13:25.950Z,1513264405.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:13:25.950Z,1513264405.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:13:25.951Z,1513264405.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:13:25.951Z,1513264405.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:13:25.951Z,1513264405.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:13:25.952Z,1513264405.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:13:25.952Z,1513264405.952 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:13:25.952Z,1513264405.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:13:25.953Z,1513264405.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:13:26.308Z,1513264406.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:26.700Z,1513264406.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:27.075Z,1513264407.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:27.478Z,1513264407.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:27.870Z,1513264407.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:28.279Z,1513264408.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:28.751Z,1513264408.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:29.104Z,1513264409.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:29.507Z,1513264409.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:30.054Z,1513264410.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:30.278Z,1513264410.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:30.707Z,1513264410.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:31.076Z,1513264411.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:31.475Z,1513264411.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:31.908Z,1513264411.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:32.287Z,1513264412.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:32.687Z,1513264412.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:33.082Z,1513264413.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:33.478Z,1513264413.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:33.882Z,1513264413.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:34.311Z,1513264414.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:34.686Z,1513264414.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:35.139Z,1513264415.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:35.488Z,1513264415.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:38.978Z,1513264418.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:39.118Z,1513264419.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:39.478Z,1513264419.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:39.880Z,1513264419.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:40.277Z,1513264420.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:40.676Z,1513264420.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:41.114Z,1513264421.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:41.503Z,1513264421.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:41.884Z,1513264421.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:42.283Z,1513264422.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:42.695Z,1513264422.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:43.083Z,1513264423.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:43.484Z,1513264423.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:43.889Z,1513264423.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:44.295Z,1513264424.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:44.727Z,1513264424.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:45.083Z,1513264425.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:45.471Z,1513264425.471 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:13:45.472Z,1513264425.472 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:13:45.472Z,1513264425.472 [BPC1](ERROR): Data Fault
2017-12-14T15:13:45.480Z,1513264425.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:45.493Z,1513264425.493 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:13:45.892Z,1513264425.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:46.280Z,1513264426.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:46.691Z,1513264426.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:46.725Z,1513264426.725 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:13:46.725Z,1513264426.725 [BPC1] No Fault, FailCount= 1
2017-12-14T15:13:47.161Z,1513264427.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:47.492Z,1513264427.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:47.947Z,1513264427.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:48.290Z,1513264428.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:48.689Z,1513264428.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:49.084Z,1513264429.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:49.484Z,1513264429.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:49.888Z,1513264429.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:50.299Z,1513264430.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:50.699Z,1513264430.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:51.128Z,1513264431.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:51.487Z,1513264431.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:51.930Z,1513264431.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:52.280Z,1513264432.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:52.692Z,1513264432.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:53.098Z,1513264433.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:53.503Z,1513264433.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:53.893Z,1513264433.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:54.331Z,1513264434.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:54.686Z,1513264434.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:55.081Z,1513264435.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:55.524Z,1513264435.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:55.888Z,1513264435.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:56.296Z,1513264436.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:56.695Z,1513264436.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:57.085Z,1513264437.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:57.540Z,1513264437.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:57.894Z,1513264437.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:58.297Z,1513264438.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:58.689Z,1513264438.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:59.080Z,1513264439.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:59.486Z,1513264439.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:13:59.899Z,1513264439.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:00.294Z,1513264440.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:00.735Z,1513264440.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:01.086Z,1513264441.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:01.483Z,1513264441.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:01.891Z,1513264441.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:02.280Z,1513264442.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:02.684Z,1513264442.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:03.081Z,1513264443.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:03.484Z,1513264443.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:03.931Z,1513264443.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:04.280Z,1513264444.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:04.685Z,1513264444.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:05.085Z,1513264445.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:05.483Z,1513264445.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:05.884Z,1513264445.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:06.284Z,1513264446.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:06.685Z,1513264446.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:07.115Z,1513264447.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:07.539Z,1513264447.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:07.911Z,1513264447.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:08.288Z,1513264448.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:08.707Z,1513264448.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:09.094Z,1513264449.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:09.535Z,1513264449.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:09.898Z,1513264449.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:10.295Z,1513264450.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:10.690Z,1513264450.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:11.090Z,1513264451.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:11.489Z,1513264451.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:11.898Z,1513264451.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:12.298Z,1513264452.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:12.700Z,1513264452.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:13.081Z,1513264453.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:13.476Z,1513264453.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:13.903Z,1513264453.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:14.287Z,1513264454.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:14.683Z,1513264454.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:15.110Z,1513264455.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:15.486Z,1513264455.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:15.880Z,1513264455.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:16.283Z,1513264456.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:16.723Z,1513264456.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:17.084Z,1513264457.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:17.484Z,1513264457.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:17.934Z,1513264457.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:18.284Z,1513264458.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:18.688Z,1513264458.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:19.081Z,1513264459.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:19.482Z,1513264459.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:19.908Z,1513264459.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:20.290Z,1513264460.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:20.687Z,1513264460.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:21.103Z,1513264461.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:21.495Z,1513264461.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:21.893Z,1513264461.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:22.290Z,1513264462.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:22.689Z,1513264462.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:23.190Z,1513264463.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:23.487Z,1513264463.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:23.898Z,1513264463.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:24.296Z,1513264464.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:24.698Z,1513264464.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:25.089Z,1513264465.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:25.485Z,1513264465.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:25.895Z,1513264465.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:26.306Z,1513264466.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:26.708Z,1513264466.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:27.096Z,1513264467.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:27.496Z,1513264467.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:27.902Z,1513264467.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:28.306Z,1513264468.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:28.676Z,1513264468.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:29.104Z,1513264469.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:29.503Z,1513264469.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:29.971Z,1513264469.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:30.283Z,1513264470.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:30.727Z,1513264470.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:31.077Z,1513264471.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:31.506Z,1513264471.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:31.883Z,1513264471.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:32.283Z,1513264472.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:32.749Z,1513264472.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:33.099Z,1513264473.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:33.497Z,1513264473.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:33.899Z,1513264473.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:34.283Z,1513264474.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:34.685Z,1513264474.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:35.081Z,1513264475.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:35.484Z,1513264475.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:35.944Z,1513264475.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:39.343Z,1513264479.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:39.487Z,1513264479.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:39.851Z,1513264479.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:40.211Z,1513264480.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:40.612Z,1513264480.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:41.034Z,1513264481.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:41.437Z,1513264481.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:41.833Z,1513264481.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:42.211Z,1513264482.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:42.622Z,1513264482.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:43.019Z,1513264483.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:43.420Z,1513264483.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:43.820Z,1513264483.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:44.256Z,1513264484.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:44.627Z,1513264484.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:45.020Z,1513264485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:45.459Z,1513264485.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:45.824Z,1513264485.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:46.223Z,1513264486.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:46.625Z,1513264486.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:47.022Z,1513264487.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:47.419Z,1513264487.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:47.831Z,1513264487.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:48.224Z,1513264488.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:48.675Z,1513264488.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:49.015Z,1513264489.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:49.416Z,1513264489.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:49.836Z,1513264489.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:50.245Z,1513264490.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:50.643Z,1513264490.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:51.035Z,1513264491.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:51.425Z,1513264491.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:51.879Z,1513264491.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:52.262Z,1513264492.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:52.683Z,1513264492.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:53.033Z,1513264493.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:53.436Z,1513264493.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:53.863Z,1513264493.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:54.212Z,1513264494.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:54.655Z,1513264494.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:55.057Z,1513264495.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:55.416Z,1513264495.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:55.824Z,1513264495.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:56.243Z,1513264496.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:56.624Z,1513264496.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:57.018Z,1513264497.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:57.417Z,1513264497.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:57.816Z,1513264497.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:58.266Z,1513264498.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:58.620Z,1513264498.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:59.044Z,1513264499.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:59.416Z,1513264499.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:14:59.816Z,1513264499.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:00.223Z,1513264500.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:00.616Z,1513264500.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:01.021Z,1513264501.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:01.468Z,1513264501.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:01.831Z,1513264501.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:02.220Z,1513264502.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:02.627Z,1513264502.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:03.054Z,1513264503.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:03.423Z,1513264503.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:03.824Z,1513264503.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:04.232Z,1513264504.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:04.668Z,1513264504.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:05.020Z,1513264505.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:05.415Z,1513264505.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:05.819Z,1513264505.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:06.231Z,1513264506.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:06.629Z,1513264506.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:07.053Z,1513264507.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:07.427Z,1513264507.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:07.883Z,1513264507.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:08.262Z,1513264508.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:08.614Z,1513264508.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:09.025Z,1513264509.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:09.431Z,1513264509.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:09.831Z,1513264509.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:10.219Z,1513264510.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:10.623Z,1513264510.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:11.062Z,1513264511.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:11.416Z,1513264511.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:11.831Z,1513264511.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:12.235Z,1513264512.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:12.635Z,1513264512.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:13.015Z,1513264513.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:13.416Z,1513264513.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:13.827Z,1513264513.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:14.272Z,1513264514.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:14.637Z,1513264514.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:15.077Z,1513264515.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:15.427Z,1513264515.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:15.818Z,1513264515.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:16.255Z,1513264516.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:16.623Z,1513264516.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:17.063Z,1513264517.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:17.509Z,1513264517.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:17.825Z,1513264517.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:18.235Z,1513264518.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:18.632Z,1513264518.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:19.024Z,1513264519.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:19.415Z,1513264519.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:19.830Z,1513264519.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:20.233Z,1513264520.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:20.678Z,1513264520.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:21.016Z,1513264521.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:21.412Z,1513264521.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:21.815Z,1513264521.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:22.224Z,1513264522.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:22.620Z,1513264522.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:23.045Z,1513264523.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:23.418Z,1513264523.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:23.857Z,1513264523.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:24.220Z,1513264524.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:24.616Z,1513264524.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:25.024Z,1513264525.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:25.452Z,1513264525.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:25.828Z,1513264525.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:26.226Z,1513264526.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:26.615Z,1513264526.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:27.082Z,1513264527.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:27.415Z,1513264527.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:27.820Z,1513264527.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:28.231Z,1513264528.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:28.629Z,1513264528.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:29.024Z,1513264529.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:29.416Z,1513264529.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:29.816Z,1513264529.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:30.272Z,1513264530.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:30.618Z,1513264530.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:31.029Z,1513264531.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:31.429Z,1513264531.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:31.830Z,1513264531.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:32.232Z,1513264532.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:32.621Z,1513264532.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:33.027Z,1513264533.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:33.439Z,1513264533.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:33.824Z,1513264533.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:34.230Z,1513264534.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:34.629Z,1513264534.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:35.034Z,1513264535.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:35.428Z,1513264535.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:35.851Z,1513264535.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:36.225Z,1513264536.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:39.687Z,1513264539.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:39.850Z,1513264539.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:40.251Z,1513264540.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:40.610Z,1513264540.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:41.038Z,1513264541.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:41.400Z,1513264541.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:41.803Z,1513264541.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:42.211Z,1513264542.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:42.609Z,1513264542.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:43.083Z,1513264543.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:43.398Z,1513264543.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:43.800Z,1513264543.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:44.200Z,1513264544.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:44.611Z,1513264544.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:45.015Z,1513264545.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:45.413Z,1513264545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:45.808Z,1513264545.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:46.260Z,1513264546.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:46.607Z,1513264546.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:47.007Z,1513264547.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:47.411Z,1513264547.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:47.800Z,1513264547.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:48.223Z,1513264548.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:48.613Z,1513264548.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:49.027Z,1513264549.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:49.467Z,1513264549.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:49.811Z,1513264549.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:50.206Z,1513264550.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:50.615Z,1513264550.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:51.012Z,1513264551.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:51.414Z,1513264551.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:51.819Z,1513264551.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:52.206Z,1513264552.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:52.653Z,1513264552.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:53.007Z,1513264553.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:53.400Z,1513264553.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:53.799Z,1513264553.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:54.201Z,1513264554.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:54.605Z,1513264554.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:55.011Z,1513264555.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:55.403Z,1513264555.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:55.839Z,1513264555.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:56.207Z,1513264556.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:56.603Z,1513264556.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:57.008Z,1513264557.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:57.412Z,1513264557.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:57.815Z,1513264557.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:58.199Z,1513264558.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:58.602Z,1513264558.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:59.047Z,1513264559.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:59.411Z,1513264559.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:15:59.855Z,1513264559.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:00.230Z,1513264560.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:00.620Z,1513264560.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:01.023Z,1513264561.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:01.430Z,1513264561.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:01.803Z,1513264561.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:02.243Z,1513264562.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:02.634Z,1513264562.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:03.015Z,1513264563.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:03.439Z,1513264563.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:03.816Z,1513264563.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:04.216Z,1513264564.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:04.595Z,1513264564.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:04.991Z,1513264564.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:05.396Z,1513264565.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:05.818Z,1513264565.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:06.220Z,1513264566.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:06.623Z,1513264566.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:07.020Z,1513264567.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:07.419Z,1513264567.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:07.803Z,1513264567.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:08.196Z,1513264568.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:08.607Z,1513264568.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:09.013Z,1513264569.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:09.416Z,1513264569.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:09.812Z,1513264569.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:10.212Z,1513264570.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:10.603Z,1513264570.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:11.006Z,1513264571.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:11.410Z,1513264571.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:11.864Z,1513264571.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:12.210Z,1513264572.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:12.612Z,1513264572.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:13.019Z,1513264573.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:13.405Z,1513264573.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:13.806Z,1513264573.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:14.228Z,1513264574.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:14.613Z,1513264574.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:15.059Z,1513264575.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:15.427Z,1513264575.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:15.817Z,1513264575.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:16.191Z,1513264576.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:16.592Z,1513264576.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:16.996Z,1513264576.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:17.397Z,1513264577.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:17.838Z,1513264577.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:18.329Z,1513264578.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:18.664Z,1513264578.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:19.029Z,1513264579.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:19.415Z,1513264579.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:19.836Z,1513264579.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:20.248Z,1513264580.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:20.642Z,1513264580.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:21.039Z,1513264581.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:21.459Z,1513264581.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:21.851Z,1513264581.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:22.280Z,1513264582.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:22.615Z,1513264582.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:23.017Z,1513264583.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:23.458Z,1513264583.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:23.859Z,1513264583.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:24.223Z,1513264584.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:24.639Z,1513264584.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:25.134Z,1513264585.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:25.447Z,1513264585.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:25.881Z,1513264585.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:26.234Z,1513264586.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:26.234Z,1513264586.234 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 294
2017-12-14T15:16:26.234Z,1513264586.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:16:26.237Z,1513264586.237 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:26.237Z,1513264586.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 294
2017-12-14T15:16:26.237Z,1513264586.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:16:26.239Z,1513264586.239 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:26.239Z,1513264586.239 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 294
2017-12-14T15:16:26.239Z,1513264586.239 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:16:26.256Z,1513264586.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:16:26.256Z,1513264586.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:16:26.256Z,1513264586.256 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:16:26.644Z,1513264586.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:16:26.644Z,1513264586.644 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 294
2017-12-14T15:16:26.653Z,1513264586.653 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:16:26.653Z,1513264586.653 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 294
2017-12-14T15:16:26.653Z,1513264586.653 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:16:26.653Z,1513264586.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 294
2017-12-14T15:16:27.018Z,1513264587.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:16:27.018Z,1513264587.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:16:27.018Z,1513264587.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:16:27.019Z,1513264587.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:16:27.019Z,1513264587.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:16:27.019Z,1513264587.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:16:27.020Z,1513264587.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:16:27.020Z,1513264587.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:16:27.021Z,1513264587.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:16:27.424Z,1513264587.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:27.822Z,1513264587.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:28.271Z,1513264588.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:28.632Z,1513264588.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:29.050Z,1513264589.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:29.438Z,1513264589.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:29.844Z,1513264589.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:30.216Z,1513264590.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:30.615Z,1513264590.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:31.012Z,1513264591.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:31.439Z,1513264591.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:31.898Z,1513264591.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:32.246Z,1513264592.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:32.611Z,1513264592.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:33.015Z,1513264593.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:33.428Z,1513264593.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:33.850Z,1513264593.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:34.219Z,1513264594.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:34.624Z,1513264594.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:35.018Z,1513264595.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:35.431Z,1513264595.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:35.828Z,1513264595.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:36.227Z,1513264596.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:36.625Z,1513264596.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:43.546Z,1513264603.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:43.578Z,1513264603.578 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:11:42.9Z
2017-12-14T15:16:43.578Z,1513264603.578 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:16:43.578Z,1513264603.578 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:16:43.718Z,1513264603.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:56.533Z,1513264616.533 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:16:56.534Z,1513264616.534 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:16:56.534Z,1513264616.534 [BPC1](ERROR): Communications Fault
2017-12-14T15:16:56.542Z,1513264616.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:56.580Z,1513264616.580 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:16:56.691Z,1513264616.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:57.059Z,1513264617.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:57.463Z,1513264617.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:16:57.484Z,1513264617.484 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:16:57.484Z,1513264617.484 [BPC1] No Fault, FailCount= 1
2017-12-14T15:17:01.067Z,1513264621.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:01.141Z,1513264621.141 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0340.lzma
2017-12-14T15:17:01.195Z,1513264621.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:01.695Z,1513264621.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:01.931Z,1513264621.931 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0340.lzma.bak
2017-12-14T15:17:01.931Z,1513264621.931 [DataOverHttps](INFO): SBD MOMSN=5439059
2017-12-14T15:17:02.014Z,1513264622.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:03.120Z,1513264623.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:03.266Z,1513264623.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:07.168Z,1513264627.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:07.319Z,1513264627.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:07.672Z,1513264627.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:08.035Z,1513264628.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:08.442Z,1513264628.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:08.848Z,1513264628.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:12.323Z,1513264632.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:12.462Z,1513264632.462 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0341.lzma
2017-12-14T15:17:12.544Z,1513264632.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:12.818Z,1513264632.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:13.152Z,1513264633.152 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0341.lzma.bak
2017-12-14T15:17:13.152Z,1513264633.152 [DataOverHttps](INFO): SBD MOMSN=5439062
2017-12-14T15:17:13.223Z,1513264633.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:14.327Z,1513264634.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:14.351Z,1513264634.351 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:17:14.351Z,1513264634.351 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:17:14.351Z,1513264634.351 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:17:14.536Z,1513264634.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:17.930Z,1513264637.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:18.140Z,1513264638.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:18.460Z,1513264638.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:18.845Z,1513264638.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:19.232Z,1513264639.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:19.678Z,1513264639.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:20.051Z,1513264640.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:20.450Z,1513264640.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:20.855Z,1513264640.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:21.240Z,1513264641.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:21.646Z,1513264641.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:22.041Z,1513264642.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:22.447Z,1513264642.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:22.907Z,1513264642.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:23.264Z,1513264643.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:23.633Z,1513264643.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:24.029Z,1513264644.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:24.470Z,1513264644.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:24.839Z,1513264644.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:25.269Z,1513264645.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:25.639Z,1513264645.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:26.087Z,1513264646.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:26.498Z,1513264646.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:26.844Z,1513264646.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:27.252Z,1513264647.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:27.658Z,1513264647.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:28.027Z,1513264648.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:28.526Z,1513264648.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:28.866Z,1513264648.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:29.266Z,1513264649.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:29.655Z,1513264649.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:30.031Z,1513264650.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:30.428Z,1513264650.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:30.839Z,1513264650.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:31.238Z,1513264651.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:31.639Z,1513264651.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:32.028Z,1513264652.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:32.468Z,1513264652.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:32.843Z,1513264652.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:33.252Z,1513264653.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:33.648Z,1513264653.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:34.076Z,1513264654.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:34.448Z,1513264654.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:34.841Z,1513264654.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:35.245Z,1513264655.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:35.687Z,1513264655.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:36.039Z,1513264656.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:36.443Z,1513264656.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:36.846Z,1513264656.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:37.260Z,1513264657.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:37.707Z,1513264657.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:38.026Z,1513264658.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:38.431Z,1513264658.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:38.867Z,1513264658.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:39.232Z,1513264659.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:39.639Z,1513264659.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:40.082Z,1513264660.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:40.491Z,1513264660.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:40.848Z,1513264660.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:41.291Z,1513264661.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:41.647Z,1513264661.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:42.092Z,1513264662.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:42.507Z,1513264662.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:42.846Z,1513264662.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:43.254Z,1513264663.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:43.659Z,1513264663.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:44.024Z,1513264664.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:44.430Z,1513264664.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:44.879Z,1513264664.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:45.312Z,1513264665.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:45.705Z,1513264665.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:46.035Z,1513264666.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:46.486Z,1513264666.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:46.866Z,1513264666.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:47.248Z,1513264667.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:47.664Z,1513264667.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:48.028Z,1513264668.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:48.523Z,1513264668.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:48.839Z,1513264668.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:49.277Z,1513264669.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:49.648Z,1513264669.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:50.043Z,1513264670.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:50.435Z,1513264670.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:50.835Z,1513264670.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:51.232Z,1513264671.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:51.674Z,1513264671.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:52.037Z,1513264672.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:52.440Z,1513264672.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:52.872Z,1513264672.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:53.232Z,1513264673.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:53.628Z,1513264673.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:54.025Z,1513264674.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:54.478Z,1513264674.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:54.860Z,1513264674.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:55.243Z,1513264675.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:55.662Z,1513264675.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:56.051Z,1513264676.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:56.483Z,1513264676.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:56.863Z,1513264676.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:57.248Z,1513264677.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:57.651Z,1513264677.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:58.152Z,1513264678.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:58.452Z,1513264678.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:58.846Z,1513264678.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:59.225Z,1513264679.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:17:59.630Z,1513264679.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:00.032Z,1513264680.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:00.441Z,1513264680.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:00.843Z,1513264680.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:01.247Z,1513264681.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:01.652Z,1513264681.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:02.114Z,1513264682.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:02.424Z,1513264682.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:02.861Z,1513264682.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:03.259Z,1513264683.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:03.655Z,1513264683.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:04.035Z,1513264684.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:04.485Z,1513264684.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:04.860Z,1513264684.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:05.238Z,1513264685.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:05.637Z,1513264685.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:06.036Z,1513264686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:06.434Z,1513264686.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:06.849Z,1513264686.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:07.247Z,1513264687.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:07.699Z,1513264687.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:08.047Z,1513264688.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:08.504Z,1513264688.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:08.916Z,1513264688.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:09.239Z,1513264689.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:09.672Z,1513264689.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:10.026Z,1513264690.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:10.540Z,1513264690.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:10.851Z,1513264690.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:11.250Z,1513264691.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:11.659Z,1513264691.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:12.025Z,1513264692.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:12.424Z,1513264692.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:12.837Z,1513264692.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:13.236Z,1513264693.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:13.639Z,1513264693.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:14.173Z,1513264694.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:14.446Z,1513264694.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:14.836Z,1513264694.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:18.316Z,1513264698.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:18.446Z,1513264698.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:18.823Z,1513264698.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:19.192Z,1513264699.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:19.587Z,1513264699.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:20.019Z,1513264700.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:20.396Z,1513264700.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:20.793Z,1513264700.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:21.191Z,1513264701.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:21.588Z,1513264701.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:21.988Z,1513264701.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:22.452Z,1513264702.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:22.799Z,1513264702.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:23.207Z,1513264703.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:23.627Z,1513264703.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:24.002Z,1513264704.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:24.394Z,1513264704.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:24.795Z,1513264704.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:25.187Z,1513264705.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:25.586Z,1513264705.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:25.992Z,1513264705.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:26.418Z,1513264706.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:26.823Z,1513264706.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:27.197Z,1513264707.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:27.588Z,1513264707.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:27.997Z,1513264707.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:28.391Z,1513264708.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:28.796Z,1513264708.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:29.202Z,1513264709.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:29.600Z,1513264709.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:30.124Z,1513264710.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:30.389Z,1513264710.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:30.862Z,1513264710.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:31.189Z,1513264711.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:31.630Z,1513264711.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:32.007Z,1513264712.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:32.425Z,1513264712.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:32.808Z,1513264712.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:33.187Z,1513264713.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:33.592Z,1513264713.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:33.990Z,1513264713.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:34.395Z,1513264714.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:34.792Z,1513264714.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:35.205Z,1513264715.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:35.607Z,1513264715.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:36.000Z,1513264716.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:36.507Z,1513264716.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:36.807Z,1513264716.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:37.184Z,1513264717.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:37.610Z,1513264717.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:38.009Z,1513264718.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:38.492Z,1513264718.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:38.792Z,1513264718.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:39.186Z,1513264719.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:39.588Z,1513264719.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:39.987Z,1513264719.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:40.418Z,1513264720.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:40.819Z,1513264720.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:41.193Z,1513264721.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:41.611Z,1513264721.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:42.131Z,1513264722.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:42.387Z,1513264722.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:42.827Z,1513264722.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:43.193Z,1513264723.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:43.587Z,1513264723.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:43.996Z,1513264723.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:44.403Z,1513264724.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:44.800Z,1513264724.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:45.187Z,1513264725.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:45.588Z,1513264725.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:46.028Z,1513264726.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:46.405Z,1513264726.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:46.780Z,1513264726.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:47.207Z,1513264727.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:47.616Z,1513264727.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:48.010Z,1513264728.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:48.404Z,1513264728.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:48.803Z,1513264728.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:49.188Z,1513264729.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:49.612Z,1513264729.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:50.090Z,1513264730.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:50.484Z,1513264730.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:50.803Z,1513264730.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:51.199Z,1513264731.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:51.595Z,1513264731.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:52.003Z,1513264732.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:52.489Z,1513264732.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:52.865Z,1513264732.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:53.199Z,1513264733.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:53.606Z,1513264733.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:54.139Z,1513264734.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:54.403Z,1513264734.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:54.812Z,1513264734.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:55.268Z,1513264735.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:55.589Z,1513264735.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:56.015Z,1513264736.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:56.425Z,1513264736.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:56.800Z,1513264736.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:57.191Z,1513264737.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:57.589Z,1513264737.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:57.990Z,1513264737.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:58.391Z,1513264738.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:58.821Z,1513264738.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:59.201Z,1513264739.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:18:59.607Z,1513264739.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:00.007Z,1513264740.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:00.411Z,1513264740.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:00.778Z,1513264740.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:01.183Z,1513264741.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:01.610Z,1513264741.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:02.027Z,1513264742.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:02.397Z,1513264742.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:02.793Z,1513264742.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:03.219Z,1513264743.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:03.594Z,1513264743.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:03.988Z,1513264743.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:04.394Z,1513264744.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:04.795Z,1513264744.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:05.211Z,1513264745.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:05.616Z,1513264745.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:06.012Z,1513264746.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:06.385Z,1513264746.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:06.793Z,1513264746.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:07.189Z,1513264747.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:07.588Z,1513264747.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:07.991Z,1513264747.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:08.424Z,1513264748.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:08.819Z,1513264748.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:09.190Z,1513264749.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:09.588Z,1513264749.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:09.988Z,1513264749.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:10.397Z,1513264750.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:10.789Z,1513264750.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:11.199Z,1513264751.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:11.630Z,1513264751.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:12.001Z,1513264752.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:12.398Z,1513264752.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:12.794Z,1513264752.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:13.190Z,1513264753.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:13.590Z,1513264753.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:14.007Z,1513264754.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:14.411Z,1513264754.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:14.815Z,1513264754.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:15.295Z,1513264755.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:18.718Z,1513264758.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:18.855Z,1513264758.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:19.229Z,1513264759.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:19.679Z,1513264759.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:20.054Z,1513264760.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:20.523Z,1513264760.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:20.824Z,1513264760.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:21.259Z,1513264761.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:21.627Z,1513264761.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:22.037Z,1513264762.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:22.436Z,1513264762.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:22.842Z,1513264762.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:23.234Z,1513264763.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:23.248Z,1513264763.248 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:19:23.612Z,1513264763.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:24.015Z,1513264764.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:24.478Z,1513264764.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:24.859Z,1513264764.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:25.230Z,1513264765.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:25.632Z,1513264765.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:26.023Z,1513264766.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:26.430Z,1513264766.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:26.839Z,1513264766.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:27.236Z,1513264767.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:27.237Z,1513264767.237 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 295
2017-12-14T15:19:27.237Z,1513264767.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:19:27.239Z,1513264767.239 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:27.239Z,1513264767.239 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 295
2017-12-14T15:19:27.239Z,1513264767.239 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:19:27.241Z,1513264767.241 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:27.241Z,1513264767.241 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 295
2017-12-14T15:19:27.241Z,1513264767.241 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:19:27.266Z,1513264767.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:19:27.266Z,1513264767.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:19:27.266Z,1513264767.266 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:19:27.704Z,1513264767.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:19:27.704Z,1513264767.704 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 295
2017-12-14T15:19:27.704Z,1513264767.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:19:27.704Z,1513264767.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 295
2017-12-14T15:19:27.705Z,1513264767.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:19:27.705Z,1513264767.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 295
2017-12-14T15:19:28.042Z,1513264768.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:19:28.043Z,1513264768.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:19:28.043Z,1513264768.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:19:28.043Z,1513264768.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:19:28.044Z,1513264768.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:19:28.044Z,1513264768.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:19:28.044Z,1513264768.044 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:19:28.045Z,1513264768.045 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:19:28.045Z,1513264768.045 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:19:28.424Z,1513264768.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:28.872Z,1513264768.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:29.232Z,1513264769.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:29.631Z,1513264769.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:30.023Z,1513264770.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:30.424Z,1513264770.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:30.878Z,1513264770.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:31.257Z,1513264771.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:31.641Z,1513264771.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:32.036Z,1513264772.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:32.483Z,1513264772.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:32.847Z,1513264772.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:33.247Z,1513264773.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:33.620Z,1513264773.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:34.119Z,1513264774.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:34.486Z,1513264774.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:34.844Z,1513264774.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:35.285Z,1513264775.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:35.616Z,1513264775.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:36.028Z,1513264776.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:36.430Z,1513264776.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:36.838Z,1513264776.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:37.291Z,1513264777.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:37.656Z,1513264777.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:38.027Z,1513264778.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:38.434Z,1513264778.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:38.882Z,1513264778.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:39.259Z,1513264779.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:39.631Z,1513264779.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:40.035Z,1513264780.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:40.458Z,1513264780.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:40.863Z,1513264780.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:41.243Z,1513264781.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:41.687Z,1513264781.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:42.034Z,1513264782.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:42.461Z,1513264782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:42.848Z,1513264782.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:43.252Z,1513264783.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:43.673Z,1513264783.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:44.031Z,1513264784.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:44.427Z,1513264784.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:44.833Z,1513264784.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:45.237Z,1513264785.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:45.634Z,1513264785.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:46.026Z,1513264786.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:46.499Z,1513264786.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:46.868Z,1513264786.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:47.237Z,1513264787.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:47.639Z,1513264787.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:48.029Z,1513264788.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:48.488Z,1513264788.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:48.846Z,1513264788.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:49.238Z,1513264789.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:49.642Z,1513264789.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:50.131Z,1513264790.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:50.448Z,1513264790.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:50.858Z,1513264790.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:51.221Z,1513264791.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:51.643Z,1513264791.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:52.110Z,1513264792.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:52.441Z,1513264792.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:52.835Z,1513264792.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:53.235Z,1513264793.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:53.631Z,1513264793.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:54.030Z,1513264794.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:54.419Z,1513264794.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:54.819Z,1513264794.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:55.252Z,1513264795.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:55.624Z,1513264795.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:56.028Z,1513264796.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:56.441Z,1513264796.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:56.834Z,1513264796.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:57.239Z,1513264797.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:57.635Z,1513264797.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:58.047Z,1513264798.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:58.451Z,1513264798.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:58.825Z,1513264798.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:59.230Z,1513264799.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:19:59.708Z,1513264799.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:00.047Z,1513264800.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:00.501Z,1513264800.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:00.840Z,1513264800.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:01.247Z,1513264801.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:01.643Z,1513264801.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:02.110Z,1513264802.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:02.513Z,1513264802.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:02.899Z,1513264802.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:03.229Z,1513264803.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:03.639Z,1513264803.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:04.037Z,1513264804.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:04.491Z,1513264804.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:04.847Z,1513264804.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:05.213Z,1513264805.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:05.620Z,1513264805.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:06.141Z,1513264806.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:06.420Z,1513264806.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:06.844Z,1513264806.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:07.247Z,1513264807.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:07.644Z,1513264807.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:08.035Z,1513264808.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:08.432Z,1513264808.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:08.837Z,1513264808.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:09.240Z,1513264809.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:09.650Z,1513264809.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:10.023Z,1513264810.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:10.442Z,1513264810.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:10.832Z,1513264810.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:11.240Z,1513264811.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:11.643Z,1513264811.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:12.039Z,1513264812.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:12.434Z,1513264812.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:12.886Z,1513264812.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:13.247Z,1513264813.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:13.644Z,1513264813.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:14.016Z,1513264814.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:14.531Z,1513264814.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:14.841Z,1513264814.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:15.246Z,1513264815.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:18.723Z,1513264818.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:18.889Z,1513264818.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:19.235Z,1513264819.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:19.623Z,1513264819.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:20.019Z,1513264820.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:20.425Z,1513264820.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:20.830Z,1513264820.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:21.230Z,1513264821.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:21.643Z,1513264821.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:22.119Z,1513264822.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:22.415Z,1513264822.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:22.818Z,1513264822.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:23.226Z,1513264823.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:23.618Z,1513264823.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:24.119Z,1513264824.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:24.417Z,1513264824.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:24.869Z,1513264824.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:25.227Z,1513264825.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:25.611Z,1513264825.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:26.039Z,1513264826.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:26.418Z,1513264826.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:26.853Z,1513264826.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:27.224Z,1513264827.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:27.624Z,1513264827.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:28.026Z,1513264828.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:28.483Z,1513264828.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:28.835Z,1513264828.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:29.231Z,1513264829.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:29.623Z,1513264829.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:30.035Z,1513264830.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:30.495Z,1513264830.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:30.824Z,1513264830.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:31.218Z,1513264831.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:31.616Z,1513264831.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:32.009Z,1513264832.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:32.421Z,1513264832.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:32.823Z,1513264832.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:33.239Z,1513264833.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:33.630Z,1513264833.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:34.039Z,1513264834.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:34.415Z,1513264834.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:34.815Z,1513264834.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:35.244Z,1513264835.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:35.616Z,1513264835.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:36.067Z,1513264836.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:36.425Z,1513264836.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:36.825Z,1513264836.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:37.222Z,1513264837.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:37.625Z,1513264837.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:38.016Z,1513264838.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:38.449Z,1513264838.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:38.816Z,1513264838.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:39.236Z,1513264839.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:39.636Z,1513264839.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:40.047Z,1513264840.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:40.425Z,1513264840.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:40.819Z,1513264840.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:41.219Z,1513264841.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:41.663Z,1513264841.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:42.033Z,1513264842.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:42.487Z,1513264842.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:42.840Z,1513264842.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:43.226Z,1513264843.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:43.626Z,1513264843.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:44.007Z,1513264844.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:44.526Z,1513264844.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:44.898Z,1513264844.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:45.243Z,1513264845.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:45.644Z,1513264845.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:46.017Z,1513264846.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:46.422Z,1513264846.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:46.826Z,1513264846.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:47.248Z,1513264847.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:47.634Z,1513264847.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:48.134Z,1513264848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:48.459Z,1513264848.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:48.819Z,1513264848.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:49.260Z,1513264849.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:49.643Z,1513264849.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:50.016Z,1513264850.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:50.435Z,1513264850.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:50.822Z,1513264850.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:51.227Z,1513264851.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:51.635Z,1513264851.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:52.034Z,1513264852.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:52.441Z,1513264852.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:52.820Z,1513264852.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:53.216Z,1513264853.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:53.614Z,1513264853.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:54.017Z,1513264854.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:54.459Z,1513264854.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:54.819Z,1513264854.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:55.220Z,1513264855.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:55.627Z,1513264855.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:56.015Z,1513264856.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:56.499Z,1513264856.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:56.816Z,1513264856.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:57.225Z,1513264857.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:57.672Z,1513264857.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:58.031Z,1513264858.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:58.501Z,1513264858.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:59.019Z,1513264859.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:59.220Z,1513264859.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:20:59.612Z,1513264859.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:00.036Z,1513264860.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:00.423Z,1513264860.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:00.894Z,1513264860.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:01.226Z,1513264861.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:01.615Z,1513264861.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:02.022Z,1513264862.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:02.419Z,1513264862.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:02.829Z,1513264862.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:03.229Z,1513264863.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:03.632Z,1513264863.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:04.120Z,1513264864.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:04.419Z,1513264864.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:04.816Z,1513264864.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:05.222Z,1513264865.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:05.619Z,1513264865.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:06.031Z,1513264866.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:06.432Z,1513264866.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:06.834Z,1513264866.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:07.225Z,1513264867.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:07.619Z,1513264867.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:08.020Z,1513264868.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:08.485Z,1513264868.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:08.826Z,1513264868.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:09.283Z,1513264869.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:09.629Z,1513264869.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:10.028Z,1513264870.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:10.629Z,1513264870.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:10.851Z,1513264870.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:11.268Z,1513264871.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:11.636Z,1513264871.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:12.027Z,1513264872.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:12.494Z,1513264872.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:12.827Z,1513264872.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:13.229Z,1513264873.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:13.630Z,1513264873.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:14.024Z,1513264874.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:14.435Z,1513264874.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:14.835Z,1513264874.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:15.212Z,1513264875.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:15.617Z,1513264875.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:20.142Z,1513264880.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:20.316Z,1513264880.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:20.686Z,1513264880.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:21.090Z,1513264881.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:21.471Z,1513264881.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:21.867Z,1513264881.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:22.284Z,1513264882.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:22.664Z,1513264882.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:23.068Z,1513264883.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:23.366Z,1513264883.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:21:23.512Z,1513264883.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:23.871Z,1513264883.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:24.162Z,1513264884.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:21:24.279Z,1513264884.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:24.726Z,1513264884.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:25.075Z,1513264885.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:25.484Z,1513264885.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:25.879Z,1513264885.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:26.288Z,1513264886.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:26.659Z,1513264886.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:27.071Z,1513264887.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:27.468Z,1513264887.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:27.887Z,1513264887.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:28.272Z,1513264888.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:28.675Z,1513264888.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:29.083Z,1513264889.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:29.469Z,1513264889.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:29.898Z,1513264889.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:30.276Z,1513264890.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:30.752Z,1513264890.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:31.127Z,1513264891.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:31.502Z,1513264891.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:31.903Z,1513264891.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:32.275Z,1513264892.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:32.685Z,1513264892.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:33.142Z,1513264893.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:33.544Z,1513264893.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:33.897Z,1513264893.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:34.298Z,1513264894.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:34.663Z,1513264894.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:35.153Z,1513264895.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:35.476Z,1513264895.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:35.871Z,1513264895.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:36.309Z,1513264896.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:36.718Z,1513264896.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:37.071Z,1513264897.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:37.468Z,1513264897.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:37.890Z,1513264897.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:38.268Z,1513264898.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:38.715Z,1513264898.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:39.083Z,1513264899.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:39.464Z,1513264899.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:39.934Z,1513264899.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:40.299Z,1513264900.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:40.686Z,1513264900.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:41.078Z,1513264901.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:41.483Z,1513264901.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:41.879Z,1513264901.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:42.284Z,1513264902.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:42.672Z,1513264902.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:43.055Z,1513264903.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:43.482Z,1513264903.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:43.885Z,1513264903.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:44.267Z,1513264904.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:44.671Z,1513264904.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:45.094Z,1513264905.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:45.455Z,1513264905.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:45.872Z,1513264905.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:46.272Z,1513264906.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:46.694Z,1513264906.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:47.057Z,1513264907.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:47.500Z,1513264907.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:47.867Z,1513264907.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:48.267Z,1513264908.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:48.663Z,1513264908.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:49.050Z,1513264909.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:49.448Z,1513264909.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:49.867Z,1513264909.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:50.295Z,1513264910.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:50.665Z,1513264910.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:51.055Z,1513264911.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:51.459Z,1513264911.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:51.862Z,1513264911.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:52.275Z,1513264912.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:52.667Z,1513264912.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:53.075Z,1513264913.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:53.454Z,1513264913.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:53.916Z,1513264913.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:54.267Z,1513264914.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:54.759Z,1513264914.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:55.080Z,1513264915.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:55.450Z,1513264915.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:55.911Z,1513264915.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:56.267Z,1513264916.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:56.715Z,1513264916.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:57.042Z,1513264917.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:57.471Z,1513264917.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:57.843Z,1513264917.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:58.271Z,1513264918.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:58.643Z,1513264918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:59.100Z,1513264919.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:59.474Z,1513264919.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:21:59.868Z,1513264919.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:00.280Z,1513264920.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:00.655Z,1513264920.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:01.049Z,1513264921.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:01.448Z,1513264921.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:01.856Z,1513264921.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:02.335Z,1513264922.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:02.680Z,1513264922.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:03.101Z,1513264923.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:03.451Z,1513264923.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:03.860Z,1513264923.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:04.287Z,1513264924.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:04.652Z,1513264924.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:05.048Z,1513264925.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:05.491Z,1513264925.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:05.893Z,1513264925.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:06.282Z,1513264926.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:06.659Z,1513264926.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:07.059Z,1513264927.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:07.450Z,1513264927.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:07.857Z,1513264927.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:08.257Z,1513264928.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:08.675Z,1513264928.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:09.051Z,1513264929.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:09.448Z,1513264929.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:09.876Z,1513264929.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:10.252Z,1513264930.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:10.683Z,1513264930.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:11.052Z,1513264931.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:11.444Z,1513264931.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:11.903Z,1513264931.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:12.252Z,1513264932.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:12.675Z,1513264932.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:13.051Z,1513264933.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:13.458Z,1513264933.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:13.863Z,1513264933.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:14.259Z,1513264934.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:14.664Z,1513264934.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:14.671Z,1513264934.671 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:22:14.672Z,1513264934.672 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:22:14.672Z,1513264934.672 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:22:14.672Z,1513264934.672 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:22:15.099Z,1513264935.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:15.108Z,1513264935.108 [Default:CheckIn:D] Stopped
2017-12-14T15:22:15.108Z,1513264935.108 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:22:15.460Z,1513264935.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 888.995312 min 
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn:E] Stopped
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn] Stopped
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:22:15.465Z,1513264935.465 [Default:CheckIn](INFO): Running loop #86
2017-12-14T15:22:15.466Z,1513264935.466 [Default:CheckIn] Running Loop=86
2017-12-14T15:22:15.466Z,1513264935.466 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:22:15.466Z,1513264935.466 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:22:15.868Z,1513264935.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:19.505Z,1513264939.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:19.650Z,1513264939.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:20.008Z,1513264940.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:20.377Z,1513264940.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:20.815Z,1513264940.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:21.191Z,1513264941.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:21.589Z,1513264941.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:21.996Z,1513264941.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:22.377Z,1513264942.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:22.789Z,1513264942.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:23.187Z,1513264943.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:23.588Z,1513264943.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:23.992Z,1513264943.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:24.392Z,1513264944.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:24.794Z,1513264944.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:25.167Z,1513264945.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:25.591Z,1513264945.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:25.972Z,1513264945.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:26.388Z,1513264946.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:26.790Z,1513264946.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:27.142Z,1513264947.142 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T15:22:27.142Z,1513264947.142 [NAL9602] Data Fault, FailCount= 1
2017-12-14T15:22:27.142Z,1513264947.142 [NAL9602](ERROR): Data Fault
2017-12-14T15:22:27.174Z,1513264947.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:27.221Z,1513264947.221 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T15:22:27.542Z,1513264947.542 [NAL9602](INFO): Powering down
2017-12-14T15:22:27.575Z,1513264947.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:27.976Z,1513264947.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:28.380Z,1513264948.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:28.380Z,1513264948.380 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 296
2017-12-14T15:22:28.380Z,1513264948.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:22:28.382Z,1513264948.382 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:28.382Z,1513264948.382 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 296
2017-12-14T15:22:28.382Z,1513264948.382 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:22:28.384Z,1513264948.384 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:28.384Z,1513264948.384 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 296
2017-12-14T15:22:28.384Z,1513264948.384 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:22:28.396Z,1513264948.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:22:28.396Z,1513264948.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:22:28.396Z,1513264948.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:22:28.396Z,1513264948.396 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T15:22:28.396Z,1513264948.396 [NAL9602] No Fault, FailCount= 1
2017-12-14T15:22:28.792Z,1513264948.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:22:28.792Z,1513264948.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 296
2017-12-14T15:22:28.794Z,1513264948.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:22:28.794Z,1513264948.794 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 296
2017-12-14T15:22:28.795Z,1513264948.795 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:22:28.795Z,1513264948.795 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 296
2017-12-14T15:22:29.216Z,1513264949.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:22:29.217Z,1513264949.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:22:29.218Z,1513264949.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:22:29.218Z,1513264949.218 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:22:29.218Z,1513264949.218 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:22:29.219Z,1513264949.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:22:29.219Z,1513264949.219 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:22:29.220Z,1513264949.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:22:29.220Z,1513264949.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:22:29.586Z,1513264949.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:29.990Z,1513264949.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:30.375Z,1513264950.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:30.831Z,1513264950.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:31.186Z,1513264951.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:31.584Z,1513264951.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:31.968Z,1513264951.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:32.394Z,1513264952.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:32.767Z,1513264952.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:33.170Z,1513264953.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:33.567Z,1513264953.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:33.999Z,1513264953.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:34.391Z,1513264954.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:34.779Z,1513264954.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:35.176Z,1513264955.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:35.574Z,1513264955.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:35.975Z,1513264955.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:36.376Z,1513264956.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:36.788Z,1513264956.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:37.179Z,1513264957.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:37.580Z,1513264957.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:37.973Z,1513264957.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:38.375Z,1513264958.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:38.780Z,1513264958.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:39.176Z,1513264959.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:39.587Z,1513264959.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:39.978Z,1513264959.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:40.383Z,1513264960.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:40.778Z,1513264960.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:41.269Z,1513264961.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:41.592Z,1513264961.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:41.968Z,1513264961.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:42.406Z,1513264962.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:42.789Z,1513264962.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:43.214Z,1513264963.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:43.567Z,1513264963.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:43.971Z,1513264963.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:44.379Z,1513264964.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:44.775Z,1513264964.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:45.174Z,1513264965.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:45.577Z,1513264965.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:45.975Z,1513264965.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:46.374Z,1513264966.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:46.768Z,1513264966.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:47.181Z,1513264967.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:47.592Z,1513264967.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:47.990Z,1513264967.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:48.375Z,1513264968.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:48.773Z,1513264968.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:49.175Z,1513264969.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:49.575Z,1513264969.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:49.974Z,1513264969.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:50.511Z,1513264970.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:50.791Z,1513264970.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:51.174Z,1513264971.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:51.618Z,1513264971.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:51.975Z,1513264971.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:52.379Z,1513264972.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:52.779Z,1513264972.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:53.183Z,1513264973.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:53.574Z,1513264973.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:53.999Z,1513264973.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:54.368Z,1513264974.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:54.794Z,1513264974.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:55.174Z,1513264975.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:55.574Z,1513264975.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:55.970Z,1513264975.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:56.376Z,1513264976.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:56.828Z,1513264976.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:57.183Z,1513264977.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:57.579Z,1513264977.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:57.934Z,1513264977.934 [NAL9602](INFO): Powering up NAL9602
2017-12-14T15:22:57.982Z,1513264977.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:58.381Z,1513264978.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:58.778Z,1513264978.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:59.177Z,1513264979.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:22:59.582Z,1513264979.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:00.075Z,1513264980.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:00.382Z,1513264980.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:00.778Z,1513264980.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:01.179Z,1513264981.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:01.582Z,1513264981.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:01.983Z,1513264981.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:02.378Z,1513264982.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:02.779Z,1513264982.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:03.188Z,1513264983.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:03.623Z,1513264983.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:04.011Z,1513264984.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:04.387Z,1513264984.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:04.815Z,1513264984.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:05.174Z,1513264985.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:05.598Z,1513264985.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:05.973Z,1513264985.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:06.469Z,1513264986.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:06.776Z,1513264986.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:07.176Z,1513264987.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:07.576Z,1513264987.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:07.975Z,1513264987.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:08.376Z,1513264988.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:08.735Z,1513264988.735 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:23:08.790Z,1513264988.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:09.180Z,1513264989.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:09.627Z,1513264989.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:09.995Z,1513264989.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:10.403Z,1513264990.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:10.773Z,1513264990.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:11.183Z,1513264991.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:11.577Z,1513264991.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:11.976Z,1513264991.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:12.383Z,1513264992.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:12.819Z,1513264992.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:13.180Z,1513264993.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:13.580Z,1513264993.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:14.004Z,1513264994.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:14.382Z,1513264994.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:14.778Z,1513264994.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:15.175Z,1513264995.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:15.582Z,1513264995.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:16.017Z,1513264996.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:19.476Z,1513264999.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:19.611Z,1513264999.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:19.943Z,1513264999.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:20.347Z,1513265000.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:20.747Z,1513265000.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:21.151Z,1513265001.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:21.550Z,1513265001.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:21.975Z,1513265001.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:22.398Z,1513265002.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:22.748Z,1513265002.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:23.145Z,1513265003.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:23.550Z,1513265003.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:23.948Z,1513265003.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:24.380Z,1513265004.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:24.754Z,1513265004.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:25.159Z,1513265005.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:25.586Z,1513265005.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:26.002Z,1513265006.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:26.384Z,1513265006.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:26.755Z,1513265006.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:27.151Z,1513265007.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:27.597Z,1513265007.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:27.962Z,1513265007.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:28.398Z,1513265008.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:28.814Z,1513265008.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:29.159Z,1513265009.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:29.557Z,1513265009.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:29.955Z,1513265009.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:30.363Z,1513265010.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:30.783Z,1513265010.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:31.175Z,1513265011.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:31.539Z,1513265011.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:31.979Z,1513265011.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:32.348Z,1513265012.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:32.758Z,1513265012.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:33.151Z,1513265013.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:33.555Z,1513265013.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:33.958Z,1513265013.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:34.359Z,1513265014.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:34.750Z,1513265014.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:35.191Z,1513265015.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:35.560Z,1513265015.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:35.951Z,1513265015.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:36.363Z,1513265016.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:36.791Z,1513265016.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:37.163Z,1513265017.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:37.552Z,1513265017.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:37.959Z,1513265017.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:38.395Z,1513265018.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:38.751Z,1513265018.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:39.158Z,1513265019.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:39.563Z,1513265019.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:39.967Z,1513265019.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:40.364Z,1513265020.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:40.751Z,1513265020.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:41.151Z,1513265021.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:41.588Z,1513265021.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:41.958Z,1513265021.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:42.363Z,1513265022.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:42.779Z,1513265022.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:43.171Z,1513265023.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:43.559Z,1513265023.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:43.952Z,1513265023.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:44.366Z,1513265024.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:44.806Z,1513265024.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:45.155Z,1513265025.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:45.564Z,1513265025.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:45.971Z,1513265025.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:46.364Z,1513265026.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:46.765Z,1513265026.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:47.158Z,1513265027.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:47.560Z,1513265027.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:47.943Z,1513265027.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:48.403Z,1513265028.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:48.759Z,1513265028.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:49.197Z,1513265029.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:49.551Z,1513265029.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:49.951Z,1513265029.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:50.383Z,1513265030.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:50.753Z,1513265030.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:51.184Z,1513265031.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:51.563Z,1513265031.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:51.963Z,1513265031.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:52.356Z,1513265032.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:52.763Z,1513265032.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:53.144Z,1513265033.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:53.548Z,1513265033.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:53.946Z,1513265033.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:54.395Z,1513265034.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:54.763Z,1513265034.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:55.163Z,1513265035.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:55.552Z,1513265035.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:55.990Z,1513265035.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:56.346Z,1513265036.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:56.751Z,1513265036.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:57.155Z,1513265037.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:57.611Z,1513265037.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:57.963Z,1513265037.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:58.361Z,1513265038.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:58.747Z,1513265038.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:59.140Z,1513265039.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:59.583Z,1513265039.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:23:59.943Z,1513265039.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:00.368Z,1513265040.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:00.792Z,1513265040.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:01.164Z,1513265041.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:01.551Z,1513265041.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:01.955Z,1513265041.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:02.358Z,1513265042.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:02.748Z,1513265042.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:03.151Z,1513265043.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:03.562Z,1513265043.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:03.998Z,1513265043.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:04.379Z,1513265044.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:04.762Z,1513265044.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:05.155Z,1513265045.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:05.549Z,1513265045.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:05.948Z,1513265045.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:06.350Z,1513265046.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:06.756Z,1513265046.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:07.182Z,1513265047.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:07.552Z,1513265047.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:07.949Z,1513265047.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:08.352Z,1513265048.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:08.747Z,1513265048.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:09.178Z,1513265049.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:09.564Z,1513265049.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:09.960Z,1513265049.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:10.387Z,1513265050.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:10.755Z,1513265050.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:11.202Z,1513265051.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:11.572Z,1513265051.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:11.944Z,1513265051.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:12.472Z,1513265052.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:12.768Z,1513265052.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:13.201Z,1513265053.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:13.568Z,1513265053.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:13.947Z,1513265053.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:14.374Z,1513265054.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:14.759Z,1513265054.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:15.156Z,1513265055.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:15.558Z,1513265055.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:15.963Z,1513265055.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:16.348Z,1513265056.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:19.802Z,1513265059.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:19.939Z,1513265059.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:20.306Z,1513265060.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:20.703Z,1513265060.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:21.095Z,1513265061.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:21.507Z,1513265061.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:21.886Z,1513265061.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:22.279Z,1513265062.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:22.674Z,1513265062.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:23.084Z,1513265063.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:23.491Z,1513265063.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:23.891Z,1513265063.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:24.282Z,1513265064.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:24.694Z,1513265064.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:25.094Z,1513265065.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:25.468Z,1513265065.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:25.891Z,1513265065.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:26.297Z,1513265066.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:26.703Z,1513265066.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:27.096Z,1513265067.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:27.472Z,1513265067.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:27.871Z,1513265067.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:28.269Z,1513265068.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:28.675Z,1513265068.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:29.099Z,1513265069.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:29.498Z,1513265069.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:29.877Z,1513265069.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:30.277Z,1513265070.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:30.679Z,1513265070.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:31.074Z,1513265071.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:31.477Z,1513265071.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:31.874Z,1513265071.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:32.275Z,1513265072.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:32.683Z,1513265072.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:33.083Z,1513265073.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:33.477Z,1513265073.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:33.928Z,1513265073.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:34.273Z,1513265074.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:34.674Z,1513265074.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:35.083Z,1513265075.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:35.483Z,1513265075.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:35.903Z,1513265075.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:36.271Z,1513265076.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:36.671Z,1513265076.671 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:24:36.671Z,1513265076.671 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:24:36.671Z,1513265076.671 [BPC1](ERROR): Communications Fault
2017-12-14T15:24:36.683Z,1513265076.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:36.708Z,1513265076.708 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:24:37.078Z,1513265077.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:37.482Z,1513265077.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:37.882Z,1513265077.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:37.895Z,1513265077.895 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:24:37.895Z,1513265077.895 [BPC1] No Fault, FailCount= 1
2017-12-14T15:24:38.335Z,1513265078.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:38.702Z,1513265078.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:39.088Z,1513265079.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:39.507Z,1513265079.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:39.887Z,1513265079.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:40.292Z,1513265080.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:40.669Z,1513265080.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:41.076Z,1513265081.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:41.472Z,1513265081.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:41.871Z,1513265081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:42.272Z,1513265082.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:42.727Z,1513265082.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:43.080Z,1513265083.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:43.474Z,1513265083.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:43.874Z,1513265083.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:44.279Z,1513265084.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:44.680Z,1513265084.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:45.079Z,1513265085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:45.473Z,1513265085.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:45.954Z,1513265085.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:46.279Z,1513265086.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:46.707Z,1513265086.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:47.079Z,1513265087.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:47.476Z,1513265087.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:47.879Z,1513265087.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:48.275Z,1513265088.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:48.670Z,1513265088.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:49.116Z,1513265089.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:49.478Z,1513265089.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:49.879Z,1513265089.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:50.279Z,1513265090.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:50.680Z,1513265090.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:51.080Z,1513265091.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:51.470Z,1513265091.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:51.879Z,1513265091.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:52.334Z,1513265092.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:52.683Z,1513265092.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:53.095Z,1513265093.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:53.495Z,1513265093.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:53.888Z,1513265093.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:54.275Z,1513265094.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:54.674Z,1513265094.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:55.080Z,1513265095.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:55.530Z,1513265095.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:55.883Z,1513265095.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:56.291Z,1513265096.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:56.703Z,1513265096.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:57.085Z,1513265097.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:57.499Z,1513265097.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:57.897Z,1513265097.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:58.292Z,1513265098.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:58.711Z,1513265098.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:59.091Z,1513265099.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:59.519Z,1513265099.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:24:59.883Z,1513265099.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:00.275Z,1513265100.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:00.672Z,1513265100.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:01.069Z,1513265101.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:01.473Z,1513265101.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:01.964Z,1513265101.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:02.279Z,1513265102.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:02.676Z,1513265102.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:03.084Z,1513265103.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:03.472Z,1513265103.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:03.875Z,1513265103.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:04.270Z,1513265104.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:04.679Z,1513265104.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:05.080Z,1513265105.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:05.477Z,1513265105.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:05.883Z,1513265105.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:06.279Z,1513265106.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:06.670Z,1513265106.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:07.081Z,1513265107.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:07.475Z,1513265107.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:07.911Z,1513265107.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:08.363Z,1513265108.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:08.687Z,1513265108.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:09.086Z,1513265109.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:09.477Z,1513265109.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:09.871Z,1513265109.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:10.268Z,1513265110.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:10.691Z,1513265110.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:11.090Z,1513265111.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:11.495Z,1513265111.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:11.891Z,1513265111.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:12.268Z,1513265112.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:12.672Z,1513265112.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:13.073Z,1513265113.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:13.470Z,1513265113.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:13.879Z,1513265113.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:14.280Z,1513265114.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:14.725Z,1513265114.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:15.102Z,1513265115.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:15.472Z,1513265115.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:15.874Z,1513265115.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:16.271Z,1513265116.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:16.684Z,1513265116.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:20.511Z,1513265120.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:20.640Z,1513265120.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:21.039Z,1513265121.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:21.399Z,1513265121.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:21.839Z,1513265121.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:22.199Z,1513265122.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:22.603Z,1513265122.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:22.999Z,1513265122.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:23.408Z,1513265123.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:23.803Z,1513265123.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:24.242Z,1513265124.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:24.594Z,1513265124.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:24.995Z,1513265124.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:25.395Z,1513265125.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:25.798Z,1513265125.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:26.209Z,1513265126.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:26.612Z,1513265126.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:27.008Z,1513265127.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:27.419Z,1513265127.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:27.797Z,1513265127.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:28.194Z,1513265128.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:28.599Z,1513265128.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:29.003Z,1513265129.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:29.411Z,1513265129.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:29.411Z,1513265129.411 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 297
2017-12-14T15:25:29.411Z,1513265129.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:25:29.413Z,1513265129.413 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:29.413Z,1513265129.413 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 297
2017-12-14T15:25:29.413Z,1513265129.413 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:25:29.415Z,1513265129.415 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:29.415Z,1513265129.415 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 297
2017-12-14T15:25:29.415Z,1513265129.415 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:25:29.436Z,1513265129.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:25:29.436Z,1513265129.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:25:29.437Z,1513265129.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:25:29.820Z,1513265129.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:25:29.820Z,1513265129.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 297
2017-12-14T15:25:29.821Z,1513265129.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:25:29.821Z,1513265129.821 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 297
2017-12-14T15:25:29.821Z,1513265129.821 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:25:29.821Z,1513265129.821 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 297
2017-12-14T15:25:30.246Z,1513265130.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:25:30.246Z,1513265130.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:25:30.247Z,1513265130.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:25:30.247Z,1513265130.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:25:30.247Z,1513265130.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:25:30.248Z,1513265130.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:25:30.248Z,1513265130.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:25:30.248Z,1513265130.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:25:30.249Z,1513265130.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:25:30.658Z,1513265130.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:31.010Z,1513265131.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:31.411Z,1513265131.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:31.812Z,1513265131.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:32.207Z,1513265132.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:32.620Z,1513265132.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:33.015Z,1513265133.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:33.391Z,1513265133.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:33.844Z,1513265133.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:34.224Z,1513265134.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:34.594Z,1513265134.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:35.064Z,1513265135.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:35.421Z,1513265135.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:35.816Z,1513265135.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:36.222Z,1513265136.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:36.596Z,1513265136.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:37.071Z,1513265137.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:37.423Z,1513265137.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:37.793Z,1513265137.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:38.216Z,1513265138.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:38.617Z,1513265138.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:39.020Z,1513265139.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:39.395Z,1513265139.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:39.796Z,1513265139.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:40.230Z,1513265140.230 [BPC1](ERROR): Failed to parse message.
2017-12-14T15:25:40.230Z,1513265140.230 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:25:40.230Z,1513265140.230 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:25:40.231Z,1513265140.231 [BPC1](ERROR): Data Fault
2017-12-14T15:25:40.247Z,1513265140.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:40.314Z,1513265140.314 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:25:40.607Z,1513265140.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:41.004Z,1513265141.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:41.429Z,1513265141.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:41.442Z,1513265141.442 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:25:41.442Z,1513265141.442 [BPC1] No Fault, FailCount= 1
2017-12-14T15:25:41.855Z,1513265141.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:42.196Z,1513265142.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:42.609Z,1513265142.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:42.998Z,1513265142.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:43.436Z,1513265143.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:43.812Z,1513265143.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:44.208Z,1513265144.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:44.604Z,1513265144.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:44.999Z,1513265144.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:45.408Z,1513265145.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:45.800Z,1513265145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:46.219Z,1513265146.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:46.646Z,1513265146.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:47.002Z,1513265147.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:47.404Z,1513265147.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:47.809Z,1513265147.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:48.225Z,1513265148.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:48.627Z,1513265148.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:49.008Z,1513265149.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:49.407Z,1513265149.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:49.859Z,1513265149.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:50.236Z,1513265150.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:50.612Z,1513265150.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:51.006Z,1513265151.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:51.411Z,1513265151.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:51.815Z,1513265151.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:52.209Z,1513265152.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:52.620Z,1513265152.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:53.015Z,1513265153.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:53.395Z,1513265153.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:53.835Z,1513265153.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:54.200Z,1513265154.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:54.618Z,1513265154.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:55.018Z,1513265155.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:55.391Z,1513265155.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:55.797Z,1513265155.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:56.275Z,1513265156.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:56.596Z,1513265156.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:57.003Z,1513265157.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:57.401Z,1513265157.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:57.824Z,1513265157.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:58.203Z,1513265158.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:58.597Z,1513265158.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:58.997Z,1513265158.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:59.473Z,1513265159.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:25:59.796Z,1513265159.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:00.196Z,1513265160.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:00.600Z,1513265160.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:01.008Z,1513265161.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:01.438Z,1513265161.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:01.791Z,1513265161.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:02.260Z,1513265162.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:02.651Z,1513265162.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:03.041Z,1513265163.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:03.415Z,1513265163.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:03.847Z,1513265163.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:04.206Z,1513265164.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:04.613Z,1513265164.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:05.004Z,1513265165.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:05.395Z,1513265165.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:05.820Z,1513265165.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:06.206Z,1513265166.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:06.611Z,1513265166.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:07.015Z,1513265167.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:07.404Z,1513265167.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:07.804Z,1513265167.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:08.206Z,1513265168.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:08.606Z,1513265168.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:09.033Z,1513265169.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:09.413Z,1513265169.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:09.823Z,1513265169.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:10.217Z,1513265170.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:10.592Z,1513265170.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:10.991Z,1513265170.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:11.391Z,1513265171.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:11.796Z,1513265171.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:12.271Z,1513265172.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:12.623Z,1513265172.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:13.004Z,1513265173.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:13.403Z,1513265173.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:13.795Z,1513265173.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:14.203Z,1513265174.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:14.599Z,1513265174.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:14.998Z,1513265174.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:15.422Z,1513265175.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:15.815Z,1513265175.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:16.232Z,1513265176.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:16.611Z,1513265176.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:17.007Z,1513265177.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:22.595Z,1513265182.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:22.767Z,1513265182.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:23.151Z,1513265183.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:23.522Z,1513265183.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:23.975Z,1513265183.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:24.371Z,1513265184.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:24.751Z,1513265184.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:25.156Z,1513265185.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:25.539Z,1513265185.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:25.940Z,1513265185.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:26.332Z,1513265186.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:26.765Z,1513265186.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:27.148Z,1513265187.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:27.547Z,1513265187.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:27.931Z,1513265187.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:28.337Z,1513265188.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:28.778Z,1513265188.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:29.154Z,1513265189.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:29.534Z,1513265189.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:29.935Z,1513265189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:30.334Z,1513265190.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:30.735Z,1513265190.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:31.173Z,1513265191.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:31.517Z,1513265191.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:31.973Z,1513265191.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:32.327Z,1513265192.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:32.739Z,1513265192.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:33.154Z,1513265193.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:33.548Z,1513265193.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:33.927Z,1513265193.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:34.363Z,1513265194.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:34.770Z,1513265194.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:35.167Z,1513265195.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:35.561Z,1513265195.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:35.932Z,1513265195.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:36.328Z,1513265196.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:36.739Z,1513265196.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:37.124Z,1513265197.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:37.527Z,1513265197.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:37.931Z,1513265197.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:38.336Z,1513265198.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:38.743Z,1513265198.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:39.148Z,1513265199.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:39.510Z,1513265199.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:39.913Z,1513265199.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:40.344Z,1513265200.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:40.717Z,1513265200.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:41.128Z,1513265201.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:41.535Z,1513265201.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:41.956Z,1513265201.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:42.353Z,1513265202.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:42.729Z,1513265202.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:43.132Z,1513265203.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:43.534Z,1513265203.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:43.944Z,1513265203.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:44.347Z,1513265204.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:44.795Z,1513265204.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:45.231Z,1513265205.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:45.504Z,1513265205.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:45.932Z,1513265205.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:46.337Z,1513265206.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:46.751Z,1513265206.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:47.129Z,1513265207.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:47.574Z,1513265207.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:47.933Z,1513265207.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:48.534Z,1513265208.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:48.742Z,1513265208.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:49.133Z,1513265209.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:49.512Z,1513265209.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:49.905Z,1513265209.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:50.308Z,1513265210.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:50.733Z,1513265210.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:51.115Z,1513265211.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:51.505Z,1513265211.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:51.943Z,1513265211.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:52.303Z,1513265212.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:52.721Z,1513265212.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:53.131Z,1513265213.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:53.523Z,1513265213.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:53.931Z,1513265213.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:54.304Z,1513265214.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:54.703Z,1513265214.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:55.111Z,1513265215.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:55.519Z,1513265215.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:55.910Z,1513265215.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:56.313Z,1513265216.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:56.749Z,1513265216.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:57.112Z,1513265217.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:57.515Z,1513265217.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:57.914Z,1513265217.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:58.351Z,1513265218.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:58.711Z,1513265218.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:59.113Z,1513265219.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:59.516Z,1513265219.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:26:59.923Z,1513265219.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:00.305Z,1513265220.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:00.706Z,1513265220.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:01.107Z,1513265221.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:01.552Z,1513265221.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:01.908Z,1513265221.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:02.320Z,1513265222.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:02.719Z,1513265222.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:03.120Z,1513265223.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:03.515Z,1513265223.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:03.907Z,1513265223.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:04.308Z,1513265224.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:04.734Z,1513265224.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:05.115Z,1513265225.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:05.521Z,1513265225.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:05.927Z,1513265225.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:06.312Z,1513265226.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:06.719Z,1513265226.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:07.164Z,1513265227.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:07.511Z,1513265227.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:07.964Z,1513265227.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:08.323Z,1513265228.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:08.759Z,1513265228.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:09.123Z,1513265229.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:09.518Z,1513265229.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:09.916Z,1513265229.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:10.304Z,1513265230.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:10.703Z,1513265230.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:11.126Z,1513265231.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:11.527Z,1513265231.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:11.910Z,1513265231.910 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:27:11.910Z,1513265231.910 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:27:11.910Z,1513265231.910 [BPC1](ERROR): Communications Fault
2017-12-14T15:27:11.919Z,1513265231.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:11.932Z,1513265231.932 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:27:12.317Z,1513265232.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:12.729Z,1513265232.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:13.115Z,1513265233.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:13.140Z,1513265233.140 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:27:13.145Z,1513265233.145 [BPC1] No Fault, FailCount= 1
2017-12-14T15:27:13.567Z,1513265233.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:13.916Z,1513265233.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:14.349Z,1513265234.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:14.730Z,1513265234.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:15.138Z,1513265235.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:15.508Z,1513265235.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:15.512Z,1513265235.512 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:22:15.5Z
2017-12-14T15:27:15.512Z,1513265235.512 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:27:15.512Z,1513265235.512 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:27:15.907Z,1513265235.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:16.963Z,1513265236.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:17.099Z,1513265237.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:20.601Z,1513265240.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:20.681Z,1513265240.681 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0344.lzma
2017-12-14T15:27:20.753Z,1513265240.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:21.096Z,1513265241.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:21.437Z,1513265241.437 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0344.lzma.bak
2017-12-14T15:27:21.437Z,1513265241.437 [DataOverHttps](INFO): SBD MOMSN=5439066
2017-12-14T15:27:21.508Z,1513265241.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:22.915Z,1513265242.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:23.060Z,1513265243.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:26.511Z,1513265246.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:26.671Z,1513265246.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:27.017Z,1513265247.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:27.402Z,1513265247.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:27.808Z,1513265247.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:28.211Z,1513265248.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:31.710Z,1513265251.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:31.800Z,1513265251.800 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0345.lzma
2017-12-14T15:27:31.871Z,1513265251.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:32.244Z,1513265252.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:32.568Z,1513265252.568 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0345.lzma.bak
2017-12-14T15:27:32.568Z,1513265252.568 [DataOverHttps](INFO): SBD MOMSN=5439068
2017-12-14T15:27:32.635Z,1513265252.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:33.883Z,1513265253.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:33.886Z,1513265253.886 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:27:33.886Z,1513265253.886 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:27:33.887Z,1513265253.887 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:27:34.026Z,1513265254.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:37.700Z,1513265257.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:37.811Z,1513265257.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:38.199Z,1513265258.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:38.610Z,1513265258.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:39.019Z,1513265259.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:39.399Z,1513265259.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:39.803Z,1513265259.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:40.231Z,1513265260.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:40.577Z,1513265260.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:40.995Z,1513265260.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:41.407Z,1513265261.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:41.807Z,1513265261.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:42.175Z,1513265262.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:42.581Z,1513265262.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:42.976Z,1513265262.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:43.387Z,1513265263.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:43.805Z,1513265263.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:44.209Z,1513265264.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:44.583Z,1513265264.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:44.987Z,1513265264.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:45.380Z,1513265265.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:45.830Z,1513265265.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:46.184Z,1513265266.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:46.597Z,1513265266.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:46.992Z,1513265266.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:47.383Z,1513265267.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:47.870Z,1513265267.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:48.181Z,1513265268.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:48.596Z,1513265268.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:48.992Z,1513265268.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:49.436Z,1513265269.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:49.780Z,1513265269.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:50.183Z,1513265270.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:50.593Z,1513265270.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:50.984Z,1513265270.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:51.402Z,1513265271.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:51.796Z,1513265271.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:52.189Z,1513265272.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:52.596Z,1513265272.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:52.999Z,1513265272.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:53.394Z,1513265273.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:53.788Z,1513265273.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:54.224Z,1513265274.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:54.597Z,1513265274.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:55.007Z,1513265275.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:55.403Z,1513265275.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:55.858Z,1513265275.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:56.180Z,1513265276.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:56.584Z,1513265276.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:56.981Z,1513265276.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:57.393Z,1513265277.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:57.638Z,1513265277.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:27:57.796Z,1513265277.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:58.194Z,1513265278.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:58.435Z,1513265278.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:27:58.580Z,1513265278.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:58.845Z,1513265278.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:27:58.979Z,1513265278.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:59.451Z,1513265279.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:27:59.643Z,1513265279.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:27:59.839Z,1513265279.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:00.240Z,1513265280.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:00.437Z,1513265280.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:00.598Z,1513265280.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:00.841Z,1513265280.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:01.030Z,1513265281.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:01.383Z,1513265281.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:01.827Z,1513265281.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:02.235Z,1513265282.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:02.594Z,1513265282.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:03.022Z,1513265283.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:03.391Z,1513265283.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:03.793Z,1513265283.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:04.191Z,1513265284.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:04.587Z,1513265284.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:04.987Z,1513265284.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:05.430Z,1513265285.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:05.788Z,1513265285.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:06.181Z,1513265286.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:06.599Z,1513265286.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:06.996Z,1513265286.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:07.392Z,1513265287.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:07.791Z,1513265287.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:08.238Z,1513265288.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:08.607Z,1513265288.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:09.003Z,1513265289.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:09.421Z,1513265289.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:09.784Z,1513265289.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:10.243Z,1513265290.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:10.580Z,1513265290.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:10.980Z,1513265290.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:11.381Z,1513265291.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:11.639Z,1513265291.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:11.819Z,1513265291.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:12.184Z,1513265292.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:12.434Z,1513265292.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:12.588Z,1513265292.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:12.841Z,1513265292.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:12.984Z,1513265292.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:13.388Z,1513265293.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:13.637Z,1513265293.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:13.790Z,1513265293.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:14.183Z,1513265294.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:14.433Z,1513265294.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:14.591Z,1513265294.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:14.837Z,1513265294.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:15.045Z,1513265295.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:15.388Z,1513265295.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:15.797Z,1513265295.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:16.195Z,1513265296.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:16.586Z,1513265296.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:16.987Z,1513265296.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:17.380Z,1513265297.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:17.783Z,1513265297.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:18.238Z,1513265298.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:18.607Z,1513265298.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:18.994Z,1513265298.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:19.387Z,1513265299.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:19.790Z,1513265299.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:20.189Z,1513265300.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:20.584Z,1513265300.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:20.993Z,1513265300.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:21.439Z,1513265301.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:21.811Z,1513265301.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:22.294Z,1513265302.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:22.582Z,1513265302.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:23.010Z,1513265303.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:23.419Z,1513265303.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:23.771Z,1513265303.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:24.244Z,1513265304.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:24.624Z,1513265304.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:25.002Z,1513265305.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:25.377Z,1513265305.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:25.641Z,1513265305.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:25.776Z,1513265305.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:26.179Z,1513265306.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:26.439Z,1513265306.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:26.581Z,1513265306.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:26.850Z,1513265306.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:26.979Z,1513265306.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:27.382Z,1513265307.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:27.646Z,1513265307.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:27.859Z,1513265307.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:28.206Z,1513265308.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:28.443Z,1513265308.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:28.581Z,1513265308.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:28.853Z,1513265308.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:28.982Z,1513265308.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:29.385Z,1513265309.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:29.835Z,1513265309.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:30.191Z,1513265310.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:30.592Z,1513265310.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:30.592Z,1513265310.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 298
2017-12-14T15:28:30.592Z,1513265310.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:28:30.594Z,1513265310.594 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:30.594Z,1513265310.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 298
2017-12-14T15:28:30.594Z,1513265310.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:28:30.596Z,1513265310.596 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:30.596Z,1513265310.596 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 298
2017-12-14T15:28:30.596Z,1513265310.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:28:30.645Z,1513265310.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:28:30.645Z,1513265310.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:28:30.645Z,1513265310.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:28:31.080Z,1513265311.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:28:31.080Z,1513265311.080 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 298
2017-12-14T15:28:31.081Z,1513265311.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:28:31.081Z,1513265311.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 298
2017-12-14T15:28:31.081Z,1513265311.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:28:31.081Z,1513265311.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 298
2017-12-14T15:28:31.385Z,1513265311.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:28:31.385Z,1513265311.385 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:28:31.386Z,1513265311.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:28:31.386Z,1513265311.386 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:28:31.386Z,1513265311.386 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:28:31.387Z,1513265311.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:28:31.387Z,1513265311.387 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:28:31.387Z,1513265311.387 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:28:31.388Z,1513265311.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:28:31.788Z,1513265311.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:32.192Z,1513265312.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:32.611Z,1513265312.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:32.990Z,1513265312.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:33.399Z,1513265313.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:33.800Z,1513265313.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:34.283Z,1513265314.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:34.589Z,1513265314.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:37.390Z,1513265317.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:38.109Z,1513265318.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:38.185Z,1513265318.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:28:38.250Z,1513265318.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:38.624Z,1513265318.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:39.023Z,1513265319.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:39.410Z,1513265319.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:39.803Z,1513265319.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:40.203Z,1513265320.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:40.639Z,1513265320.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:41.007Z,1513265321.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:41.427Z,1513265321.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:41.818Z,1513265321.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:42.231Z,1513265322.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:42.619Z,1513265322.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:42.996Z,1513265322.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:43.400Z,1513265323.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:43.871Z,1513265323.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:44.210Z,1513265324.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:44.651Z,1513265324.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:45.032Z,1513265325.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:45.410Z,1513265325.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:45.819Z,1513265325.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:46.197Z,1513265326.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:46.623Z,1513265326.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:47.041Z,1513265327.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:47.417Z,1513265327.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:47.808Z,1513265327.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:48.212Z,1513265328.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:48.603Z,1513265328.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:49.003Z,1513265329.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:49.407Z,1513265329.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:49.800Z,1513265329.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:50.249Z,1513265330.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:50.618Z,1513265330.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:51.013Z,1513265331.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:51.400Z,1513265331.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:51.807Z,1513265331.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:52.212Z,1513265332.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:52.605Z,1513265332.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:53.012Z,1513265333.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:53.478Z,1513265333.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:53.823Z,1513265333.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:54.205Z,1513265334.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:54.612Z,1513265334.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:55.050Z,1513265335.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:55.415Z,1513265335.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:55.818Z,1513265335.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:56.211Z,1513265336.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:56.631Z,1513265336.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:57.019Z,1513265337.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:57.420Z,1513265337.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:57.808Z,1513265337.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:58.214Z,1513265338.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:58.610Z,1513265338.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:59.021Z,1513265339.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:59.414Z,1513265339.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:28:59.880Z,1513265339.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:00.223Z,1513265340.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:00.613Z,1513265340.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:01.007Z,1513265341.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:01.395Z,1513265341.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:01.823Z,1513265341.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:02.223Z,1513265342.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:02.623Z,1513265342.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:03.083Z,1513265343.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:03.395Z,1513265343.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:03.872Z,1513265343.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:04.227Z,1513265344.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:04.601Z,1513265344.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:04.000Z,1513265345.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:05.409Z,1513265345.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:05.809Z,1513265345.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:06.250Z,1513265346.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:06.599Z,1513265346.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:06.999Z,1513265346.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:07.458Z,1513265347.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:07.807Z,1513265347.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:08.209Z,1513265348.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:08.639Z,1513265348.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:09.010Z,1513265349.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:09.446Z,1513265349.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:09.806Z,1513265349.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:10.192Z,1513265350.192 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:29:10.192Z,1513265350.192 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:29:10.192Z,1513265350.192 [BPC1](ERROR): Communications Fault
2017-12-14T15:29:10.212Z,1513265350.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:10.242Z,1513265350.242 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:29:10.608Z,1513265350.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:11.009Z,1513265351.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:11.423Z,1513265351.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:11.464Z,1513265351.464 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:29:11.469Z,1513265351.469 [BPC1] No Fault, FailCount= 1
2017-12-14T15:29:11.868Z,1513265351.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:12.209Z,1513265352.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:12.602Z,1513265352.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:13.008Z,1513265353.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:13.423Z,1513265353.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:13.814Z,1513265353.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:14.200Z,1513265354.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:14.606Z,1513265354.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:15.020Z,1513265355.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:15.417Z,1513265355.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:15.815Z,1513265355.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:16.202Z,1513265356.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:16.618Z,1513265356.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:17.015Z,1513265357.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:17.419Z,1513265357.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:17.815Z,1513265357.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:18.223Z,1513265358.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:18.602Z,1513265358.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:19.023Z,1513265359.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:19.422Z,1513265359.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:19.836Z,1513265359.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:20.235Z,1513265360.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:20.606Z,1513265360.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:21.009Z,1513265361.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:21.408Z,1513265361.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:21.804Z,1513265361.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:22.204Z,1513265362.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:22.608Z,1513265362.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:23.050Z,1513265363.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:23.415Z,1513265363.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:23.428Z,1513265363.428 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:29:23.814Z,1513265363.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:24.211Z,1513265364.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:24.611Z,1513265364.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:25.006Z,1513265365.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:25.416Z,1513265365.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:25.818Z,1513265365.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:26.275Z,1513265366.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:26.610Z,1513265366.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:27.010Z,1513265367.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:27.415Z,1513265367.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:27.815Z,1513265367.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:28.214Z,1513265368.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:28.618Z,1513265368.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:29.012Z,1513265369.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:29.443Z,1513265369.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:29.796Z,1513265369.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:30.221Z,1513265370.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:30.680Z,1513265370.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:31.017Z,1513265371.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:31.398Z,1513265371.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:31.798Z,1513265371.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:32.265Z,1513265372.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:32.634Z,1513265372.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:33.047Z,1513265373.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:33.420Z,1513265373.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:33.819Z,1513265373.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:34.197Z,1513265374.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:34.623Z,1513265374.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:38.142Z,1513265378.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:38.291Z,1513265378.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:38.656Z,1513265378.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:39.090Z,1513265379.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:39.446Z,1513265379.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:39.846Z,1513265379.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:40.251Z,1513265380.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:40.652Z,1513265380.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:41.089Z,1513265381.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:41.446Z,1513265381.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:41.846Z,1513265381.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:42.292Z,1513265382.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:42.646Z,1513265382.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:43.052Z,1513265383.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:43.453Z,1513265383.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:43.854Z,1513265383.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:44.248Z,1513265384.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:44.655Z,1513265384.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:45.060Z,1513265385.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:45.478Z,1513265385.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:45.859Z,1513265385.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:46.246Z,1513265386.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:46.632Z,1513265386.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:47.063Z,1513265387.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:47.458Z,1513265387.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:47.863Z,1513265387.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:48.206Z,1513265388.206 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T15:29:48.206Z,1513265388.206 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T15:29:48.206Z,1513265388.206 [DropWeight](ERROR): Hardware Fault
2017-12-14T15:29:48.260Z,1513265388.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:48.280Z,1513265388.280 [CBIT](INFO): Critical error at 20171214T152948
2017-12-14T15:29:48.289Z,1513265388.289 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T15:29:48.289Z,1513265388.289 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T15:29:48.669Z,1513265388.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:48.717Z,1513265388.717 [CBIT](INFO): Critical error at 20171214T152948
2017-12-14T15:29:49.061Z,1513265389.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:49.458Z,1513265389.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:49.864Z,1513265389.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:50.237Z,1513265390.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:50.640Z,1513265390.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:51.068Z,1513265391.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:51.458Z,1513265391.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:51.931Z,1513265391.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:52.251Z,1513265392.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:52.646Z,1513265392.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:53.103Z,1513265393.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:53.456Z,1513265393.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:53.859Z,1513265393.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:54.239Z,1513265394.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:54.694Z,1513265394.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:55.067Z,1513265395.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:55.491Z,1513265395.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:55.854Z,1513265395.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:56.246Z,1513265396.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:56.647Z,1513265396.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:57.064Z,1513265397.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:57.452Z,1513265397.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:57.858Z,1513265397.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:58.298Z,1513265398.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:58.650Z,1513265398.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:59.053Z,1513265399.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:59.459Z,1513265399.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:29:59.853Z,1513265399.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:00.256Z,1513265400.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:00.651Z,1513265400.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:01.056Z,1513265401.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:01.503Z,1513265401.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:01.856Z,1513265401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:02.232Z,1513265402.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:02.660Z,1513265402.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:03.062Z,1513265403.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:03.467Z,1513265403.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:03.875Z,1513265403.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:04.238Z,1513265404.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:04.675Z,1513265404.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:05.067Z,1513265405.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:05.459Z,1513265405.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:05.864Z,1513265405.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:06.240Z,1513265406.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:06.639Z,1513265406.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:07.062Z,1513265407.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:07.471Z,1513265407.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:07.923Z,1513265407.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:08.271Z,1513265408.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:08.643Z,1513265408.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:09.045Z,1513265409.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:09.436Z,1513265409.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:09.836Z,1513265409.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:10.241Z,1513265410.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:10.665Z,1513265410.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:11.080Z,1513265411.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:11.443Z,1513265411.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:11.839Z,1513265411.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:12.243Z,1513265412.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:12.643Z,1513265412.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:13.066Z,1513265413.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:13.444Z,1513265413.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:13.868Z,1513265413.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:14.320Z,1513265414.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:14.644Z,1513265414.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:15.050Z,1513265415.050 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:30:15.050Z,1513265415.050 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:30:15.051Z,1513265415.051 [BPC1](ERROR): Data Fault
2017-12-14T15:30:15.059Z,1513265415.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:15.108Z,1513265415.108 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:30:15.455Z,1513265415.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:15.851Z,1513265415.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:16.244Z,1513265416.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:16.257Z,1513265416.257 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:30:16.257Z,1513265416.257 [BPC1] No Fault, FailCount= 1
2017-12-14T15:30:16.703Z,1513265416.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:17.059Z,1513265417.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:17.529Z,1513265417.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:17.856Z,1513265417.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:18.242Z,1513265418.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:18.649Z,1513265418.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:19.054Z,1513265419.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:19.456Z,1513265419.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:19.859Z,1513265419.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:20.239Z,1513265420.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:20.660Z,1513265420.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:21.055Z,1513265421.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:21.455Z,1513265421.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:21.858Z,1513265421.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:22.252Z,1513265422.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:22.648Z,1513265422.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:23.059Z,1513265423.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:23.456Z,1513265423.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:23.899Z,1513265423.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:24.251Z,1513265424.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:24.649Z,1513265424.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:25.066Z,1513265425.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:25.449Z,1513265425.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:25.851Z,1513265425.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:26.251Z,1513265426.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:26.671Z,1513265426.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:27.101Z,1513265427.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:27.445Z,1513265427.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:27.850Z,1513265427.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:28.248Z,1513265428.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:28.647Z,1513265428.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:29.050Z,1513265429.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:29.452Z,1513265429.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:29.859Z,1513265429.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:30.293Z,1513265430.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:30.651Z,1513265430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:31.060Z,1513265431.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:31.456Z,1513265431.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:31.849Z,1513265431.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:32.250Z,1513265432.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:32.643Z,1513265432.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:33.054Z,1513265433.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:33.454Z,1513265433.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:33.852Z,1513265433.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:34.251Z,1513265434.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:34.646Z,1513265434.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:38.300Z,1513265438.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:38.451Z,1513265438.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:38.851Z,1513265438.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:39.207Z,1513265439.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:39.619Z,1513265439.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:40.011Z,1513265440.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:40.418Z,1513265440.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:40.816Z,1513265440.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:41.197Z,1513265441.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:41.604Z,1513265441.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:41.996Z,1513265441.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:42.422Z,1513265442.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:42.824Z,1513265442.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:43.197Z,1513265443.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:43.596Z,1513265443.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:43.995Z,1513265443.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:44.471Z,1513265444.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:44.811Z,1513265444.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:45.205Z,1513265445.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:45.604Z,1513265445.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:46.004Z,1513265446.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:46.498Z,1513265446.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:46.791Z,1513265446.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:47.215Z,1513265447.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:47.593Z,1513265447.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:48.023Z,1513265448.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:48.403Z,1513265448.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:48.808Z,1513265448.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:49.255Z,1513265449.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:49.595Z,1513265449.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:50.003Z,1513265450.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:50.399Z,1513265450.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:50.798Z,1513265450.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:51.212Z,1513265451.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:51.612Z,1513265451.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:52.012Z,1513265452.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:52.469Z,1513265452.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:52.805Z,1513265452.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:53.194Z,1513265453.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:53.592Z,1513265453.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:53.998Z,1513265453.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:54.408Z,1513265454.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:54.809Z,1513265454.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:55.205Z,1513265455.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:55.626Z,1513265455.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:56.031Z,1513265456.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:56.404Z,1513265456.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:56.798Z,1513265456.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:57.204Z,1513265457.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:57.612Z,1513265457.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:58.015Z,1513265458.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:58.525Z,1513265458.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:58.800Z,1513265458.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:59.202Z,1513265459.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:30:59.607Z,1513265459.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:00.023Z,1513265460.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:00.486Z,1513265460.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:00.823Z,1513265460.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:01.239Z,1513265461.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:01.594Z,1513265461.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:02.024Z,1513265462.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:02.402Z,1513265462.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:02.810Z,1513265462.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:03.208Z,1513265463.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:03.607Z,1513265463.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:04.011Z,1513265464.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:04.395Z,1513265464.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:04.794Z,1513265464.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:05.193Z,1513265465.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:05.596Z,1513265465.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:05.991Z,1513265465.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:06.426Z,1513265466.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:06.818Z,1513265466.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:07.200Z,1513265467.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:07.591Z,1513265467.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:07.995Z,1513265467.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:08.451Z,1513265468.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:08.799Z,1513265468.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:09.211Z,1513265469.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:09.610Z,1513265469.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:10.013Z,1513265470.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:10.433Z,1513265470.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:10.802Z,1513265470.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:11.199Z,1513265471.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:11.647Z,1513265471.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:11.995Z,1513265471.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:12.498Z,1513265472.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:12.821Z,1513265472.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:13.223Z,1513265473.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:13.599Z,1513265473.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:13.993Z,1513265473.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:14.488Z,1513265474.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:14.837Z,1513265474.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:15.207Z,1513265475.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:15.608Z,1513265475.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:16.007Z,1513265476.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:16.394Z,1513265476.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:16.794Z,1513265476.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:17.242Z,1513265477.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:17.611Z,1513265477.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:18.138Z,1513265478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:18.421Z,1513265478.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:18.864Z,1513265478.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:19.222Z,1513265479.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:19.615Z,1513265479.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:20.036Z,1513265480.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:20.408Z,1513265480.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:20.810Z,1513265480.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:21.260Z,1513265481.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:21.646Z,1513265481.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:22.114Z,1513265482.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:22.531Z,1513265482.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:22.810Z,1513265482.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:23.224Z,1513265483.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:23.646Z,1513265483.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:24.009Z,1513265484.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:24.465Z,1513265484.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:24.818Z,1513265484.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:25.229Z,1513265485.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:25.640Z,1513265485.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:25.987Z,1513265485.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:26.483Z,1513265486.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:26.821Z,1513265486.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:27.231Z,1513265487.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:27.634Z,1513265487.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:28.017Z,1513265488.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:28.502Z,1513265488.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:28.881Z,1513265488.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:29.231Z,1513265489.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:29.620Z,1513265489.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:30.031Z,1513265490.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:30.415Z,1513265490.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:30.840Z,1513265490.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:31.227Z,1513265491.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:31.630Z,1513265491.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:31.630Z,1513265491.630 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 299
2017-12-14T15:31:31.630Z,1513265491.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:31:31.632Z,1513265491.632 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:31.632Z,1513265491.632 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 299
2017-12-14T15:31:31.632Z,1513265491.632 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:31:31.634Z,1513265491.634 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:31.634Z,1513265491.634 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 299
2017-12-14T15:31:31.634Z,1513265491.634 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:31:31.691Z,1513265491.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:31:31.691Z,1513265491.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:31:31.692Z,1513265491.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:31:32.186Z,1513265492.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:31:32.186Z,1513265492.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 299
2017-12-14T15:31:32.186Z,1513265492.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:31:32.186Z,1513265492.186 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 299
2017-12-14T15:31:32.187Z,1513265492.187 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:31:32.187Z,1513265492.187 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 299
2017-12-14T15:31:32.444Z,1513265492.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:31:32.461Z,1513265492.461 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:31:32.461Z,1513265492.461 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:31:32.462Z,1513265492.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:31:32.462Z,1513265492.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:31:32.462Z,1513265492.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:31:32.463Z,1513265492.463 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:31:32.463Z,1513265492.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:31:32.464Z,1513265492.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:31:32.890Z,1513265492.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:33.220Z,1513265493.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:33.619Z,1513265493.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:34.021Z,1513265494.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:34.422Z,1513265494.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:34.804Z,1513265494.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:41.643Z,1513265501.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:41.764Z,1513265501.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:42.163Z,1513265502.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:42.632Z,1513265502.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:42.960Z,1513265502.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:43.373Z,1513265503.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:43.774Z,1513265503.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:44.191Z,1513265504.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:44.626Z,1513265504.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:44.955Z,1513265504.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:45.375Z,1513265505.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:45.755Z,1513265505.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:46.207Z,1513265506.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:46.564Z,1513265506.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:46.960Z,1513265506.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:47.380Z,1513265507.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:47.774Z,1513265507.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:48.211Z,1513265508.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:48.573Z,1513265508.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:49.013Z,1513265509.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:49.336Z,1513265509.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:49.722Z,1513265509.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:50.158Z,1513265510.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:50.523Z,1513265510.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:50.924Z,1513265510.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:51.337Z,1513265511.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:51.743Z,1513265511.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:52.226Z,1513265512.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:52.539Z,1513265512.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:52.923Z,1513265512.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:53.392Z,1513265513.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:53.724Z,1513265513.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:54.127Z,1513265514.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:54.560Z,1513265514.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:54.936Z,1513265514.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:55.375Z,1513265515.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:55.729Z,1513265515.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:56.124Z,1513265516.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:56.524Z,1513265516.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:56.972Z,1513265516.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:57.336Z,1513265517.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:57.743Z,1513265517.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:58.148Z,1513265518.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:58.527Z,1513265518.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:58.928Z,1513265518.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:59.323Z,1513265519.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:31:59.731Z,1513265519.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:00.134Z,1513265520.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:00.547Z,1513265520.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:00.937Z,1513265520.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:01.373Z,1513265521.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:01.748Z,1513265521.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:02.135Z,1513265522.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:02.526Z,1513265522.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:02.923Z,1513265522.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:03.353Z,1513265523.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:03.743Z,1513265523.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:04.151Z,1513265524.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:04.523Z,1513265524.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:04.927Z,1513265524.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:05.323Z,1513265525.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:05.716Z,1513265525.716 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T15:32:05.716Z,1513265525.716 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:32:05.716Z,1513265525.716 [BPC1](ERROR): Data Fault
2017-12-14T15:32:05.724Z,1513265525.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:05.738Z,1513265525.738 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:32:06.163Z,1513265526.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:06.533Z,1513265526.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:06.993Z,1513265526.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:07.006Z,1513265527.006 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:32:07.006Z,1513265527.006 [BPC1] No Fault, FailCount= 1
2017-12-14T15:32:07.390Z,1513265527.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:07.723Z,1513265527.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:08.176Z,1513265528.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:08.531Z,1513265528.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:08.923Z,1513265528.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:09.346Z,1513265529.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:09.752Z,1513265529.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:10.158Z,1513265530.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:10.531Z,1513265530.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:10.940Z,1513265530.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:11.344Z,1513265531.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:11.735Z,1513265531.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:12.167Z,1513265532.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:12.549Z,1513265532.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:12.942Z,1513265532.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:13.347Z,1513265533.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:13.737Z,1513265533.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:14.170Z,1513265534.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:14.580Z,1513265534.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:14.942Z,1513265534.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:15.347Z,1513265535.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:15.790Z,1513265535.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:16.172Z,1513265536.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:16.547Z,1513265536.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:16.943Z,1513265536.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:17.345Z,1513265537.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:17.796Z,1513265537.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:18.193Z,1513265538.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:18.554Z,1513265538.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:18.959Z,1513265538.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:19.359Z,1513265539.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:19.730Z,1513265539.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:20.188Z,1513265540.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:20.536Z,1513265540.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:21.048Z,1513265541.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:21.344Z,1513265541.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:21.740Z,1513265541.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:22.147Z,1513265542.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:22.535Z,1513265542.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:22.931Z,1513265542.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:23.330Z,1513265543.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:23.735Z,1513265543.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:24.136Z,1513265544.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:24.537Z,1513265544.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:24.954Z,1513265544.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:25.347Z,1513265545.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:25.742Z,1513265545.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:26.167Z,1513265546.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:26.538Z,1513265546.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:26.946Z,1513265546.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:27.400Z,1513265547.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:27.800Z,1513265547.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:28.180Z,1513265548.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:28.532Z,1513265548.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:28.966Z,1513265548.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:29.329Z,1513265549.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:29.767Z,1513265549.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:30.160Z,1513265550.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:30.577Z,1513265550.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:30.955Z,1513265550.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:31.352Z,1513265551.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:31.747Z,1513265551.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:32.167Z,1513265552.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:32.543Z,1513265552.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:32.924Z,1513265552.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:33.355Z,1513265553.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:33.752Z,1513265553.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:34.220Z,1513265554.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:34.223Z,1513265554.223 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:32:34.223Z,1513265554.223 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:32:34.223Z,1513265554.223 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:32:34.223Z,1513265554.223 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:32:34.535Z,1513265554.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:34.539Z,1513265554.539 [Default:CheckIn:D] Stopped
2017-12-14T15:32:34.539Z,1513265554.539 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:32:34.932Z,1513265554.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 899.319141 min 
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn:E] Stopped
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn] Stopped
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn](INFO): Running loop #87
2017-12-14T15:32:34.936Z,1513265554.936 [Default:CheckIn] Running Loop=87
2017-12-14T15:32:34.937Z,1513265554.937 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:32:34.937Z,1513265554.937 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:32:38.352Z,1513265558.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:38.539Z,1513265558.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:38.907Z,1513265558.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:39.311Z,1513265559.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:39.703Z,1513265559.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:40.185Z,1513265560.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:40.507Z,1513265560.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:40.893Z,1513265560.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:41.303Z,1513265561.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:41.711Z,1513265561.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:42.153Z,1513265562.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:42.501Z,1513265562.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:42.893Z,1513265562.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:43.298Z,1513265563.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:43.811Z,1513265563.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:44.159Z,1513265564.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:44.504Z,1513265564.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:44.967Z,1513265564.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:45.304Z,1513265565.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:45.702Z,1513265565.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:46.147Z,1513265566.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:46.532Z,1513265566.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:46.891Z,1513265566.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:47.313Z,1513265567.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:47.714Z,1513265567.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:48.092Z,1513265568.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:48.492Z,1513265568.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:48.891Z,1513265568.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:49.291Z,1513265569.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:49.730Z,1513265569.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:50.124Z,1513265570.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:50.599Z,1513265570.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:50.911Z,1513265570.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:51.302Z,1513265571.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:51.675Z,1513265571.675 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T15:32:51.735Z,1513265571.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:52.098Z,1513265572.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:52.551Z,1513265572.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:52.911Z,1513265572.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:53.313Z,1513265573.313 [PNI_TCM](ERROR): CRC does not match. Expected:0x7897 got:0x396
2017-12-14T15:32:53.349Z,1513265573.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:53.712Z,1513265573.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:54.160Z,1513265574.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:54.504Z,1513265574.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:54.901Z,1513265574.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:55.296Z,1513265575.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:55.694Z,1513265575.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:56.167Z,1513265576.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:56.515Z,1513265576.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:56.899Z,1513265576.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:57.290Z,1513265577.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:57.691Z,1513265577.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:58.150Z,1513265578.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:58.510Z,1513265578.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:58.899Z,1513265578.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:59.337Z,1513265579.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:32:59.704Z,1513265579.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:00.185Z,1513265580.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:00.498Z,1513265580.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:00.930Z,1513265580.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:01.288Z,1513265581.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:01.691Z,1513265581.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:02.143Z,1513265582.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:02.521Z,1513265582.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:02.897Z,1513265582.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:03.296Z,1513265583.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:03.695Z,1513265583.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:04.098Z,1513265584.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:04.536Z,1513265584.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:04.892Z,1513265584.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:05.311Z,1513265585.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:05.747Z,1513265585.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:06.111Z,1513265586.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:06.520Z,1513265586.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:06.902Z,1513265586.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:07.288Z,1513265587.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:07.692Z,1513265587.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:08.166Z,1513265588.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:08.519Z,1513265588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:08.911Z,1513265588.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:09.289Z,1513265589.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:09.715Z,1513265589.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:10.156Z,1513265590.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:10.506Z,1513265590.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:10.893Z,1513265590.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:11.252Z,1513265591.252 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T15:33:11.252Z,1513265591.252 [NAL9602] Data Fault, FailCount= 2
2017-12-14T15:33:11.252Z,1513265591.252 [NAL9602](ERROR): Data Fault
2017-12-14T15:33:11.307Z,1513265591.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:11.331Z,1513265591.331 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T15:33:11.645Z,1513265591.645 [NAL9602](INFO): Powering down
2017-12-14T15:33:11.697Z,1513265591.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:12.178Z,1513265592.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:12.508Z,1513265592.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:12.523Z,1513265592.523 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T15:33:12.523Z,1513265592.523 [NAL9602] No Fault, FailCount= 2
2017-12-14T15:33:12.884Z,1513265592.884 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T15:33:12.884Z,1513265592.884 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:33:12.884Z,1513265592.884 [BPC1](ERROR): Data Fault
2017-12-14T15:33:12.916Z,1513265592.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:12.942Z,1513265592.942 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:33:13.296Z,1513265593.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:13.690Z,1513265593.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:14.145Z,1513265594.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:14.174Z,1513265594.174 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:33:14.174Z,1513265594.174 [BPC1] No Fault, FailCount= 1
2017-12-14T15:33:14.558Z,1513265594.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:14.887Z,1513265594.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:15.291Z,1513265595.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:15.687Z,1513265595.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:16.161Z,1513265596.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:16.506Z,1513265596.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:16.892Z,1513265596.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:17.290Z,1513265597.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:17.693Z,1513265597.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:18.095Z,1513265598.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:18.542Z,1513265598.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:18.904Z,1513265598.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:19.282Z,1513265599.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:19.687Z,1513265599.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:20.106Z,1513265600.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:20.484Z,1513265600.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x8834 got:0x41499
2017-12-14T15:33:20.594Z,1513265600.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:20.883Z,1513265600.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:21.298Z,1513265601.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:21.720Z,1513265601.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:22.169Z,1513265602.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:22.494Z,1513265602.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:22.927Z,1513265602.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:23.291Z,1513265603.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:23.688Z,1513265603.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:24.157Z,1513265604.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:24.514Z,1513265604.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:24.983Z,1513265604.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:25.291Z,1513265605.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:25.770Z,1513265605.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:26.159Z,1513265606.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:26.504Z,1513265606.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:26.901Z,1513265606.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:27.291Z,1513265607.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:27.678Z,1513265607.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x1708 got:0x36817
2017-12-14T15:33:27.703Z,1513265607.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:28.176Z,1513265608.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:28.495Z,1513265608.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:28.899Z,1513265608.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:29.298Z,1513265609.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:29.703Z,1513265609.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:30.075Z,1513265610.075 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T15:33:30.163Z,1513265610.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:30.505Z,1513265610.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:30.896Z,1513265610.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:31.358Z,1513265611.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:31.692Z,1513265611.692 [PNI_TCM](ERROR): CRC does not match. Expected:0x28335 got:0x37863
2017-12-14T15:33:31.712Z,1513265611.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:32.104Z,1513265612.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:32.519Z,1513265612.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:32.911Z,1513265612.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:33.285Z,1513265613.285 [PNI_TCM](ERROR): CRC does not match. Expected:0x8693 got:0x15623
2017-12-14T15:33:33.319Z,1513265613.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:33.692Z,1513265613.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:34.088Z,1513265614.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:34.599Z,1513265614.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:34.920Z,1513265614.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:35.298Z,1513265615.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:38.794Z,1513265618.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:38.915Z,1513265618.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:39.311Z,1513265619.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:39.676Z,1513265619.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:40.140Z,1513265620.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:40.482Z,1513265620.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:40.889Z,1513265620.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:41.279Z,1513265621.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:41.686Z,1513265621.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:42.026Z,1513265622.026 [NAL9602](INFO): Powering up NAL9602
2017-12-14T15:33:42.165Z,1513265622.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:42.485Z,1513265622.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:42.876Z,1513265622.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:43.280Z,1513265623.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:43.673Z,1513265623.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:44.158Z,1513265624.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:44.474Z,1513265624.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:44.872Z,1513265624.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:45.275Z,1513265625.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:45.697Z,1513265625.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:46.072Z,1513265626.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:46.519Z,1513265626.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:46.877Z,1513265626.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:47.284Z,1513265627.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:47.711Z,1513265627.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:48.130Z,1513265628.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:48.528Z,1513265628.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:48.881Z,1513265628.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:49.286Z,1513265629.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:49.681Z,1513265629.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:50.148Z,1513265630.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:50.506Z,1513265630.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:50.872Z,1513265630.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:51.320Z,1513265631.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:51.710Z,1513265631.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:52.137Z,1513265632.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:52.502Z,1513265632.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:52.896Z,1513265632.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:53.230Z,1513265633.230 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:33:53.290Z,1513265633.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:53.694Z,1513265633.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:54.152Z,1513265634.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:54.505Z,1513265634.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:54.899Z,1513265634.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:55.300Z,1513265635.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:55.688Z,1513265635.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:56.128Z,1513265636.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:56.500Z,1513265636.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:56.897Z,1513265636.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:57.289Z,1513265637.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:57.691Z,1513265637.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:58.056Z,1513265638.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x45295 got:0x54535
2017-12-14T15:33:58.076Z,1513265638.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:58.506Z,1513265638.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:58.893Z,1513265638.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:59.287Z,1513265639.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:33:59.745Z,1513265639.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:00.171Z,1513265640.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:00.520Z,1513265640.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:00.899Z,1513265640.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:01.302Z,1513265641.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:01.684Z,1513265641.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:02.084Z,1513265642.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:02.531Z,1513265642.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:02.887Z,1513265642.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:03.307Z,1513265643.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:03.689Z,1513265643.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:04.160Z,1513265644.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:04.476Z,1513265644.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:04.878Z,1513265644.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:05.279Z,1513265645.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:05.694Z,1513265645.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:06.140Z,1513265646.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:06.503Z,1513265646.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:06.892Z,1513265646.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:07.272Z,1513265647.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:07.686Z,1513265647.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:08.146Z,1513265648.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:08.490Z,1513265648.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:08.892Z,1513265648.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:09.280Z,1513265649.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:09.686Z,1513265649.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:10.164Z,1513265650.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:10.542Z,1513265650.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:10.895Z,1513265650.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:11.294Z,1513265651.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:11.693Z,1513265651.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:12.175Z,1513265652.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:12.495Z,1513265652.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:12.890Z,1513265652.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:13.276Z,1513265653.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:13.733Z,1513265653.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:14.091Z,1513265654.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:14.537Z,1513265654.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:14.927Z,1513265654.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:15.280Z,1513265655.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:15.678Z,1513265655.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:16.087Z,1513265656.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:16.512Z,1513265656.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:16.944Z,1513265656.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:17.283Z,1513265657.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:17.695Z,1513265657.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:18.146Z,1513265658.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:18.484Z,1513265658.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:18.876Z,1513265658.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:19.291Z,1513265659.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:19.691Z,1513265659.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:20.138Z,1513265660.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:20.498Z,1513265660.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:20.899Z,1513265660.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:21.288Z,1513265661.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:21.691Z,1513265661.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:22.195Z,1513265662.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:22.511Z,1513265662.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:22.895Z,1513265662.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:23.272Z,1513265663.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x23394 got:0x53889
2017-12-14T15:34:23.339Z,1513265663.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:23.672Z,1513265663.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:24.155Z,1513265664.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:24.502Z,1513265664.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:24.872Z,1513265664.872 [PNI_TCM](ERROR): CRC does not match. Expected:0x3377 got:0x10525
2017-12-14T15:34:24.907Z,1513265664.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:25.282Z,1513265665.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:25.690Z,1513265665.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:26.083Z,1513265666.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:26.530Z,1513265666.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:26.891Z,1513265666.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:27.298Z,1513265667.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:27.694Z,1513265667.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:28.071Z,1513265668.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:28.507Z,1513265668.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:28.896Z,1513265668.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:29.295Z,1513265669.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:29.708Z,1513265669.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:30.082Z,1513265670.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:30.527Z,1513265670.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:30.886Z,1513265670.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:31.291Z,1513265671.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:31.688Z,1513265671.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:32.139Z,1513265672.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:32.507Z,1513265672.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:32.507Z,1513265672.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 300
2017-12-14T15:34:32.507Z,1513265672.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:34:32.509Z,1513265672.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:32.509Z,1513265672.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 300
2017-12-14T15:34:32.509Z,1513265672.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:34:32.511Z,1513265672.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:32.511Z,1513265672.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 300
2017-12-14T15:34:32.511Z,1513265672.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:34:32.551Z,1513265672.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:34:32.552Z,1513265672.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:34:32.552Z,1513265672.552 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:34:32.949Z,1513265672.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:34:32.949Z,1513265672.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 300
2017-12-14T15:34:32.950Z,1513265672.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:34:32.950Z,1513265672.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 300
2017-12-14T15:34:32.950Z,1513265672.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:34:32.950Z,1513265672.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 300
2017-12-14T15:34:33.282Z,1513265673.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:34:33.283Z,1513265673.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:34:33.283Z,1513265673.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:34:33.284Z,1513265673.284 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:34:33.284Z,1513265673.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:34:33.284Z,1513265673.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:34:33.285Z,1513265673.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:34:33.285Z,1513265673.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:34:33.286Z,1513265673.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:34:33.716Z,1513265673.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:34.127Z,1513265674.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x63158 got:0x6977
2017-12-14T15:34:34.154Z,1513265674.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:34.487Z,1513265674.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:34.898Z,1513265674.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:35.290Z,1513265675.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:35.683Z,1513265675.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:39.144Z,1513265679.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:39.285Z,1513265679.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:39.658Z,1513265679.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:40.026Z,1513265680.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:40.435Z,1513265680.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:40.815Z,1513265680.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:41.211Z,1513265681.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:41.645Z,1513265681.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:42.039Z,1513265682.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:42.531Z,1513265682.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:42.835Z,1513265682.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:43.218Z,1513265683.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:43.635Z,1513265683.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:44.019Z,1513265684.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:44.495Z,1513265684.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:44.898Z,1513265684.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:45.213Z,1513265685.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:45.615Z,1513265685.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:46.119Z,1513265686.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:46.423Z,1513265686.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:46.851Z,1513265686.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:47.220Z,1513265687.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:47.620Z,1513265687.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:48.023Z,1513265688.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:48.431Z,1513265688.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:48.839Z,1513265688.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:49.235Z,1513265689.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:49.629Z,1513265689.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:50.024Z,1513265690.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:50.424Z,1513265690.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:50.828Z,1513265690.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:51.225Z,1513265691.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:51.620Z,1513265691.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:52.088Z,1513265692.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:52.428Z,1513265692.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:52.822Z,1513265692.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:53.227Z,1513265693.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:53.629Z,1513265693.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:54.042Z,1513265694.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:54.436Z,1513265694.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:54.816Z,1513265694.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:55.242Z,1513265695.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:55.627Z,1513265695.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:56.018Z,1513265696.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:56.501Z,1513265696.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:56.833Z,1513265696.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:57.245Z,1513265697.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:57.631Z,1513265697.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:58.012Z,1513265698.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:58.530Z,1513265698.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:58.852Z,1513265698.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:59.221Z,1513265699.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:34:59.627Z,1513265699.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:00.027Z,1513265700.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:00.423Z,1513265700.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:00.822Z,1513265700.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:01.219Z,1513265701.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:01.628Z,1513265701.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:02.086Z,1513265702.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:02.430Z,1513265702.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:02.835Z,1513265702.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:03.216Z,1513265703.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:03.614Z,1513265703.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:04.016Z,1513265704.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:04.434Z,1513265704.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:04.832Z,1513265704.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:05.235Z,1513265705.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:05.624Z,1513265705.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:06.114Z,1513265706.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:06.413Z,1513265706.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:06.820Z,1513265706.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:07.278Z,1513265707.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:07.626Z,1513265707.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:08.165Z,1513265708.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:08.485Z,1513265708.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:08.839Z,1513265708.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:09.264Z,1513265709.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:09.612Z,1513265709.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:10.104Z,1513265710.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:10.495Z,1513265710.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:10.825Z,1513265710.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:11.228Z,1513265711.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:11.614Z,1513265711.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:12.015Z,1513265712.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:12.489Z,1513265712.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:12.820Z,1513265712.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:13.217Z,1513265713.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:13.632Z,1513265713.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:14.035Z,1513265714.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:14.435Z,1513265714.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:14.819Z,1513265714.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:15.214Z,1513265715.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:15.620Z,1513265715.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:16.021Z,1513265716.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:16.418Z,1513265716.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:16.820Z,1513265716.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:17.224Z,1513265717.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:17.675Z,1513265717.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:18.022Z,1513265718.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:18.426Z,1513265718.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:18.806Z,1513265718.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:19.228Z,1513265719.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:19.636Z,1513265719.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:20.114Z,1513265720.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:20.450Z,1513265720.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:20.863Z,1513265720.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:21.214Z,1513265721.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:21.622Z,1513265721.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:22.020Z,1513265722.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:22.427Z,1513265722.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:22.824Z,1513265722.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:23.231Z,1513265723.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:23.611Z,1513265723.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:24.028Z,1513265724.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:24.492Z,1513265724.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:24.831Z,1513265724.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:25.227Z,1513265725.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:25.634Z,1513265725.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:26.048Z,1513265726.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:26.504Z,1513265726.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:26.819Z,1513265726.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:27.260Z,1513265727.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:27.617Z,1513265727.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:28.110Z,1513265728.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:28.434Z,1513265728.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:28.837Z,1513265728.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:29.232Z,1513265729.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:29.627Z,1513265729.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:30.112Z,1513265730.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:30.495Z,1513265730.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:30.855Z,1513265730.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:31.220Z,1513265731.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:31.658Z,1513265731.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:32.094Z,1513265732.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:32.445Z,1513265732.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:32.829Z,1513265732.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:33.225Z,1513265733.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:33.643Z,1513265733.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:34.012Z,1513265734.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:34.429Z,1513265734.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:34.830Z,1513265734.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:35.229Z,1513265735.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:35.613Z,1513265735.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:36.021Z,1513265736.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:39.588Z,1513265739.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:39.743Z,1513265739.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:40.130Z,1513265740.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:40.527Z,1513265740.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:40.899Z,1513265740.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:41.296Z,1513265741.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:41.699Z,1513265741.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:42.144Z,1513265742.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:42.518Z,1513265742.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:42.902Z,1513265742.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:43.311Z,1513265743.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:43.693Z,1513265743.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:44.150Z,1513265744.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:44.510Z,1513265744.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:44.895Z,1513265744.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:45.303Z,1513265745.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:45.707Z,1513265745.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:46.153Z,1513265746.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:46.510Z,1513265746.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:46.894Z,1513265746.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:47.290Z,1513265747.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:47.717Z,1513265747.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:48.159Z,1513265748.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:48.500Z,1513265748.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:48.896Z,1513265748.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:49.296Z,1513265749.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:49.695Z,1513265749.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:50.139Z,1513265750.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:50.527Z,1513265750.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:50.893Z,1513265750.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:51.307Z,1513265751.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:51.701Z,1513265751.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:52.159Z,1513265752.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:52.522Z,1513265752.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:52.892Z,1513265752.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:53.346Z,1513265753.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:53.708Z,1513265753.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:54.149Z,1513265754.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:54.528Z,1513265754.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:54.893Z,1513265754.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:55.306Z,1513265755.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:55.641Z,1513265755.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:55.716Z,1513265755.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:56.175Z,1513265756.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:56.438Z,1513265756.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:56.504Z,1513265756.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:56.852Z,1513265756.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:56.903Z,1513265756.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:57.302Z,1513265757.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:57.645Z,1513265757.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:57.700Z,1513265757.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:58.156Z,1513265758.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:58.441Z,1513265758.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:58.522Z,1513265758.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:58.845Z,1513265758.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:35:58.907Z,1513265758.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:59.343Z,1513265759.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:35:59.701Z,1513265759.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:00.160Z,1513265760.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:00.508Z,1513265760.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:00.895Z,1513265760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:01.298Z,1513265761.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:01.708Z,1513265761.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:02.176Z,1513265762.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:02.515Z,1513265762.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:02.899Z,1513265762.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:03.297Z,1513265763.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:03.711Z,1513265763.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:04.175Z,1513265764.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:04.502Z,1513265764.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:04.900Z,1513265764.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:05.307Z,1513265765.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:05.743Z,1513265765.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:06.105Z,1513265766.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:06.540Z,1513265766.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:06.900Z,1513265766.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:07.303Z,1513265767.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:07.662Z,1513265767.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:07.707Z,1513265767.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:08.101Z,1513265768.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:08.459Z,1513265768.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:08.535Z,1513265768.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:08.870Z,1513265768.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:08.921Z,1513265768.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:09.304Z,1513265769.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:09.666Z,1513265769.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:09.719Z,1513265769.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:10.148Z,1513265770.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:10.461Z,1513265770.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:10.505Z,1513265770.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:10.865Z,1513265770.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:10.890Z,1513265770.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:11.299Z,1513265771.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:11.663Z,1513265771.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:11.727Z,1513265771.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:12.218Z,1513265772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:12.460Z,1513265772.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:12.515Z,1513265772.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:12.865Z,1513265772.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:12.891Z,1513265772.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:13.334Z,1513265773.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:13.662Z,1513265773.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:13.697Z,1513265773.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:14.196Z,1513265774.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:14.457Z,1513265774.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:14.512Z,1513265774.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:14.864Z,1513265774.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:14.950Z,1513265774.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:15.303Z,1513265775.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:15.658Z,1513265775.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:15.719Z,1513265775.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:16.135Z,1513265776.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:16.454Z,1513265776.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:16.503Z,1513265776.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:16.858Z,1513265776.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:16.907Z,1513265776.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:17.315Z,1513265777.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:17.724Z,1513265777.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:18.167Z,1513265778.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:18.554Z,1513265778.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:18.927Z,1513265778.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:19.328Z,1513265779.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:19.727Z,1513265779.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:20.158Z,1513265780.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:20.510Z,1513265780.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:20.907Z,1513265780.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:21.294Z,1513265781.294 [PNI_TCM](ERROR): CRC does not match. Expected:0x42932 got:0x54716
2017-12-14T15:36:21.317Z,1513265781.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:21.655Z,1513265781.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:21.731Z,1513265781.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:22.111Z,1513265782.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:22.449Z,1513265782.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:22.528Z,1513265782.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:22.902Z,1513265782.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:22.911Z,1513265782.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:23.324Z,1513265783.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:23.698Z,1513265783.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:23.742Z,1513265783.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:24.198Z,1513265784.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:24.494Z,1513265784.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:24.537Z,1513265784.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:24.889Z,1513265784.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:24.897Z,1513265784.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:25.288Z,1513265785.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:25.694Z,1513265785.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:25.706Z,1513265785.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:26.210Z,1513265786.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:26.490Z,1513265786.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:26.541Z,1513265786.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:26.893Z,1513265786.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:26.938Z,1513265786.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:27.328Z,1513265787.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:27.690Z,1513265787.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:27.693Z,1513265787.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:28.175Z,1513265788.175 [PNI_TCM](ERROR): CRC does not match. Expected:0x15314 got:0x39687
2017-12-14T15:36:28.235Z,1513265788.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:28.485Z,1513265788.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:28.545Z,1513265788.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:28.894Z,1513265788.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:28.908Z,1513265788.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:29.315Z,1513265789.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:29.689Z,1513265789.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:29.718Z,1513265789.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:30.163Z,1513265790.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:30.486Z,1513265790.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:30.563Z,1513265790.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:30.889Z,1513265790.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:30.895Z,1513265790.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:31.334Z,1513265791.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:31.686Z,1513265791.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:31.720Z,1513265791.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:32.209Z,1513265792.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:32.482Z,1513265792.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:32.523Z,1513265792.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:32.885Z,1513265792.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:32.895Z,1513265792.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:33.308Z,1513265793.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:33.687Z,1513265793.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:33.735Z,1513265793.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:34.107Z,1513265794.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:34.482Z,1513265794.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:34.531Z,1513265794.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:34.885Z,1513265794.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:34.951Z,1513265794.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:35.319Z,1513265795.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:35.682Z,1513265795.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:35.725Z,1513265795.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:36.105Z,1513265796.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:36.478Z,1513265796.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:37.274Z,1513265797.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:38.070Z,1513265798.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:38.868Z,1513265798.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:39.661Z,1513265799.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:40.459Z,1513265800.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:40.788Z,1513265800.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:40.908Z,1513265800.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:41.254Z,1513265801.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:41.307Z,1513265801.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:41.709Z,1513265801.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:42.053Z,1513265802.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:42.134Z,1513265802.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:42.494Z,1513265802.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:42.850Z,1513265802.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:42.896Z,1513265802.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:43.300Z,1513265803.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:43.646Z,1513265803.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:43.696Z,1513265803.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:44.123Z,1513265804.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:44.443Z,1513265804.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:44.497Z,1513265804.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:44.895Z,1513265804.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:45.341Z,1513265805.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:45.695Z,1513265805.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:46.128Z,1513265806.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:46.496Z,1513265806.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:46.899Z,1513265806.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:47.297Z,1513265807.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:47.687Z,1513265807.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:48.104Z,1513265808.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:48.427Z,1513265808.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:48.484Z,1513265808.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x63721 got:0x51
2017-12-14T15:36:48.503Z,1513265808.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:48.887Z,1513265808.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:49.234Z,1513265809.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:49.292Z,1513265809.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:49.699Z,1513265809.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:50.029Z,1513265810.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:50.097Z,1513265810.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:50.511Z,1513265810.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:50.825Z,1513265810.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:50.935Z,1513265810.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:51.303Z,1513265811.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:51.629Z,1513265811.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:51.698Z,1513265811.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:52.133Z,1513265812.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:52.425Z,1513265812.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:52.487Z,1513265812.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:52.899Z,1513265812.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:53.238Z,1513265813.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:53.292Z,1513265813.292 [PNI_TCM](ERROR): CRC does not match. Expected:0x31645 got:0x49334
2017-12-14T15:36:53.319Z,1513265813.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:53.703Z,1513265813.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:54.033Z,1513265814.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:54.201Z,1513265814.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:54.499Z,1513265814.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:54.829Z,1513265814.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:54.880Z,1513265814.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x1850 got:0x49334
2017-12-14T15:36:54.921Z,1513265814.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:55.314Z,1513265815.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:55.626Z,1513265815.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:36:55.727Z,1513265815.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:56.147Z,1513265816.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:56.499Z,1513265816.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:56.911Z,1513265816.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:57.359Z,1513265817.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:57.723Z,1513265817.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:58.148Z,1513265818.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:58.488Z,1513265818.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:58.912Z,1513265818.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:59.341Z,1513265819.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:36:59.749Z,1513265819.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:00.186Z,1513265820.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:00.524Z,1513265820.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:00.908Z,1513265820.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:01.308Z,1513265821.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:01.712Z,1513265821.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:02.095Z,1513265822.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:02.548Z,1513265822.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:02.942Z,1513265822.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:03.327Z,1513265823.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:03.684Z,1513265823.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:04.094Z,1513265824.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:04.550Z,1513265824.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:04.888Z,1513265824.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:05.310Z,1513265825.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:05.783Z,1513265825.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:06.172Z,1513265826.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:06.484Z,1513265826.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:06.930Z,1513265826.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:07.306Z,1513265827.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:07.779Z,1513265827.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:08.140Z,1513265828.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:08.477Z,1513265828.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:08.895Z,1513265828.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:09.293Z,1513265829.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:09.703Z,1513265829.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:10.153Z,1513265830.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:10.494Z,1513265830.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:10.936Z,1513265830.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:11.292Z,1513265831.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:11.686Z,1513265831.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:12.146Z,1513265832.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:12.494Z,1513265832.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:12.902Z,1513265832.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:13.295Z,1513265833.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:13.693Z,1513265833.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:14.175Z,1513265834.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:14.491Z,1513265834.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:14.885Z,1513265834.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:15.287Z,1513265835.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:15.690Z,1513265835.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:16.125Z,1513265836.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:16.528Z,1513265836.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:16.915Z,1513265836.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:17.276Z,1513265837.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x52628 got:0x53929
2017-12-14T15:37:17.296Z,1513265837.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:17.695Z,1513265837.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:18.090Z,1513265838.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:18.520Z,1513265838.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:18.901Z,1513265838.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:19.292Z,1513265839.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:19.692Z,1513265839.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:20.133Z,1513265840.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:20.528Z,1513265840.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:20.886Z,1513265840.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:21.298Z,1513265841.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:21.699Z,1513265841.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:22.155Z,1513265842.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:22.474Z,1513265842.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:22.879Z,1513265842.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:23.302Z,1513265843.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:23.756Z,1513265843.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:24.147Z,1513265844.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:24.495Z,1513265844.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:24.886Z,1513265844.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:25.292Z,1513265845.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:25.683Z,1513265845.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:26.164Z,1513265846.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:26.503Z,1513265846.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:26.912Z,1513265846.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:27.303Z,1513265847.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:27.695Z,1513265847.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:28.226Z,1513265848.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:28.487Z,1513265848.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:28.923Z,1513265848.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:29.280Z,1513265849.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:29.723Z,1513265849.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:30.123Z,1513265850.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:30.511Z,1513265850.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:30.890Z,1513265850.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:31.298Z,1513265851.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:31.693Z,1513265851.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:32.091Z,1513265852.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:32.523Z,1513265852.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:32.900Z,1513265852.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:33.350Z,1513265853.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:33.350Z,1513265853.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 301
2017-12-14T15:37:33.350Z,1513265853.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:37:33.352Z,1513265853.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:33.352Z,1513265853.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 301
2017-12-14T15:37:33.352Z,1513265853.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:37:33.354Z,1513265853.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:33.354Z,1513265853.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 301
2017-12-14T15:37:33.354Z,1513265853.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:37:33.403Z,1513265853.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:37:33.403Z,1513265853.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:37:33.403Z,1513265853.403 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:37:33.721Z,1513265853.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:37:33.721Z,1513265853.721 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 301
2017-12-14T15:37:33.722Z,1513265853.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:37:33.722Z,1513265853.722 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 301
2017-12-14T15:37:33.722Z,1513265853.722 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:37:33.722Z,1513265853.722 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 301
2017-12-14T15:37:34.127Z,1513265854.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:37:34.127Z,1513265854.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:37:34.127Z,1513265854.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:37:34.128Z,1513265854.128 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:37:34.128Z,1513265854.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:37:34.128Z,1513265854.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:37:34.137Z,1513265854.137 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:37:34.137Z,1513265854.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:37:34.138Z,1513265854.138 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:37:34.503Z,1513265854.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:34.894Z,1513265854.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:35.298Z,1513265855.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:35.302Z,1513265855.302 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:32:34.9Z
2017-12-14T15:37:35.302Z,1513265855.302 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:37:35.302Z,1513265855.302 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:37:35.676Z,1513265855.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:36.575Z,1513265856.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:36.735Z,1513265856.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:40.330Z,1513265860.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:40.409Z,1513265860.409 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0348.lzma
2017-12-14T15:37:40.485Z,1513265860.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:40.835Z,1513265860.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:41.176Z,1513265861.176 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0348.lzma.bak
2017-12-14T15:37:41.176Z,1513265861.176 [DataOverHttps](INFO): SBD MOMSN=5439073
2017-12-14T15:37:41.243Z,1513265861.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:42.446Z,1513265862.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:42.567Z,1513265862.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:45.918Z,1513265865.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:46.055Z,1513265866.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:46.535Z,1513265866.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:46.836Z,1513265866.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:47.236Z,1513265867.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:47.635Z,1513265867.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:51.136Z,1513265871.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:51.198Z,1513265871.198 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0349.lzma
2017-12-14T15:37:51.263Z,1513265871.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:51.651Z,1513265871.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:51.987Z,1513265871.987 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0349.lzma.bak
2017-12-14T15:37:51.988Z,1513265871.988 [DataOverHttps](INFO): SBD MOMSN=5439077
2017-12-14T15:37:52.137Z,1513265872.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:53.455Z,1513265873.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:53.462Z,1513265873.462 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:37:53.463Z,1513265873.463 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:37:53.463Z,1513265873.463 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:37:53.579Z,1513265873.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:57.099Z,1513265877.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:57.226Z,1513265877.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:57.632Z,1513265877.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:58.004Z,1513265878.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:58.516Z,1513265878.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:58.829Z,1513265878.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:59.202Z,1513265879.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:37:59.603Z,1513265879.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:00.113Z,1513265880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:00.484Z,1513265880.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:00.819Z,1513265880.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:01.216Z,1513265881.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:01.603Z,1513265881.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:02.007Z,1513265882.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:02.434Z,1513265882.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:02.807Z,1513265882.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:03.200Z,1513265883.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:03.632Z,1513265883.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:04.012Z,1513265884.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:04.422Z,1513265884.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:04.810Z,1513265884.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:05.212Z,1513265885.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:05.662Z,1513265885.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:06.097Z,1513265886.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:06.423Z,1513265886.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:06.831Z,1513265886.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:07.223Z,1513265887.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:07.596Z,1513265887.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:07.996Z,1513265887.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:08.415Z,1513265888.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:08.893Z,1513265888.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:09.200Z,1513265889.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:09.615Z,1513265889.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:10.021Z,1513265890.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:10.420Z,1513265890.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:10.811Z,1513265890.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:11.194Z,1513265891.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:11.596Z,1513265891.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:12.066Z,1513265892.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:12.531Z,1513265892.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:12.832Z,1513265892.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:13.209Z,1513265893.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:13.608Z,1513265893.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:14.011Z,1513265894.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:14.478Z,1513265894.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:14.799Z,1513265894.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:15.243Z,1513265895.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:15.604Z,1513265895.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:16.112Z,1513265896.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:16.435Z,1513265896.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:16.807Z,1513265896.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:17.203Z,1513265897.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:17.639Z,1513265897.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:18.157Z,1513265898.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:18.463Z,1513265898.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:18.855Z,1513265898.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:19.239Z,1513265899.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:19.608Z,1513265899.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:20.099Z,1513265900.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:20.410Z,1513265900.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:20.815Z,1513265900.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:21.210Z,1513265901.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:21.665Z,1513265901.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:22.014Z,1513265902.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:22.429Z,1513265902.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:22.831Z,1513265902.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:23.200Z,1513265903.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:23.607Z,1513265903.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:24.003Z,1513265904.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:24.446Z,1513265904.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:24.839Z,1513265904.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:25.212Z,1513265905.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:25.603Z,1513265905.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:26.004Z,1513265906.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:26.486Z,1513265906.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:26.810Z,1513265906.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:27.213Z,1513265907.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:27.616Z,1513265907.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:28.087Z,1513265908.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:28.459Z,1513265908.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:28.811Z,1513265908.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:29.190Z,1513265909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:29.590Z,1513265909.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:29.990Z,1513265909.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:30.404Z,1513265910.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:30.815Z,1513265910.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:31.220Z,1513265911.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:31.598Z,1513265911.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:31.998Z,1513265911.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:32.397Z,1513265912.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:32.800Z,1513265912.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:33.212Z,1513265913.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:33.639Z,1513265913.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:34.007Z,1513265914.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:34.423Z,1513265914.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:34.800Z,1513265914.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:35.195Z,1513265915.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:35.603Z,1513265915.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:36.002Z,1513265916.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:36.403Z,1513265916.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:36.840Z,1513265916.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:37.232Z,1513265917.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:37.603Z,1513265917.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:38.011Z,1513265918.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:38.399Z,1513265918.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:38.798Z,1513265918.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:39.198Z,1513265919.198 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T15:38:39.198Z,1513265919.198 [BPC1] Data Fault, FailCount= 1
2017-12-14T15:38:39.199Z,1513265919.199 [BPC1](ERROR): Data Fault
2017-12-14T15:38:39.211Z,1513265919.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:39.250Z,1513265919.250 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T15:38:39.619Z,1513265919.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:40.074Z,1513265920.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:40.483Z,1513265920.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:40.530Z,1513265920.530 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:38:40.530Z,1513265920.530 [BPC1] No Fault, FailCount= 1
2017-12-14T15:38:40.863Z,1513265920.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:41.193Z,1513265921.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:41.593Z,1513265921.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:42.028Z,1513265922.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:42.478Z,1513265922.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:42.823Z,1513265922.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:43.244Z,1513265923.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:43.599Z,1513265923.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:43.994Z,1513265923.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:44.404Z,1513265924.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:44.804Z,1513265924.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:45.207Z,1513265925.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:45.608Z,1513265925.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:46.008Z,1513265926.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:46.433Z,1513265926.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:46.806Z,1513265926.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:47.219Z,1513265927.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:47.610Z,1513265927.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:48.011Z,1513265928.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:48.423Z,1513265928.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:48.828Z,1513265928.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:49.250Z,1513265929.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:49.631Z,1513265929.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:50.007Z,1513265930.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:50.411Z,1513265930.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:50.807Z,1513265930.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:51.204Z,1513265931.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:51.616Z,1513265931.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:52.017Z,1513265932.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:52.412Z,1513265932.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:52.870Z,1513265932.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:53.215Z,1513265933.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:53.614Z,1513265933.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:54.023Z,1513265934.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:57.516Z,1513265937.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:57.672Z,1513265937.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:58.118Z,1513265938.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:58.425Z,1513265938.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:58.822Z,1513265938.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:59.337Z,1513265939.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:38:59.636Z,1513265939.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:00.066Z,1513265940.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:00.449Z,1513265940.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:00.827Z,1513265940.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:01.246Z,1513265941.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:01.628Z,1513265941.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:02.114Z,1513265942.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:02.455Z,1513265942.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:02.883Z,1513265942.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:03.238Z,1513265943.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:03.615Z,1513265943.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:04.016Z,1513265944.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:04.427Z,1513265944.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:04.827Z,1513265944.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:05.230Z,1513265945.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:05.705Z,1513265945.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:06.032Z,1513265946.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:06.443Z,1513265946.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:06.829Z,1513265946.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:07.218Z,1513265947.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:07.619Z,1513265947.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:08.015Z,1513265948.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:08.514Z,1513265948.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:08.880Z,1513265948.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:09.237Z,1513265949.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:09.630Z,1513265949.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:10.027Z,1513265950.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:10.507Z,1513265950.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:10.882Z,1513265950.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:11.258Z,1513265951.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:11.619Z,1513265951.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:12.116Z,1513265952.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:12.448Z,1513265952.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:12.819Z,1513265952.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:13.222Z,1513265953.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:13.623Z,1513265953.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:14.016Z,1513265954.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:14.434Z,1513265954.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:14.834Z,1513265954.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:15.233Z,1513265955.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:15.629Z,1513265955.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:16.029Z,1513265956.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:16.406Z,1513265956.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:16.846Z,1513265956.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:17.236Z,1513265957.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:17.639Z,1513265957.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:18.103Z,1513265958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:18.491Z,1513265958.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:18.823Z,1513265958.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:19.221Z,1513265959.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:19.620Z,1513265959.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:20.019Z,1513265960.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:20.420Z,1513265960.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:20.824Z,1513265960.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:21.225Z,1513265961.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:21.652Z,1513265961.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:22.078Z,1513265962.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:22.500Z,1513265962.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:22.831Z,1513265962.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:23.256Z,1513265963.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:23.631Z,1513265963.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:23.645Z,1513265963.645 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:39:24.034Z,1513265964.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:24.514Z,1513265964.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:24.895Z,1513265964.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:25.247Z,1513265965.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:25.662Z,1513265965.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:26.075Z,1513265966.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:26.424Z,1513265966.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:26.822Z,1513265966.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:27.228Z,1513265967.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:27.647Z,1513265967.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:28.130Z,1513265968.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:28.439Z,1513265968.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:28.816Z,1513265968.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:29.220Z,1513265969.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:29.619Z,1513265969.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:30.020Z,1513265970.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:30.436Z,1513265970.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:30.833Z,1513265970.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:31.232Z,1513265971.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:31.624Z,1513265971.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:32.025Z,1513265972.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:32.431Z,1513265972.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:32.835Z,1513265972.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:33.216Z,1513265973.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:33.624Z,1513265973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:34.071Z,1513265974.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:34.476Z,1513265974.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:34.835Z,1513265974.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:35.227Z,1513265975.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:35.642Z,1513265975.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:36.030Z,1513265976.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:36.515Z,1513265976.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:36.863Z,1513265976.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:37.234Z,1513265977.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:37.675Z,1513265977.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:38.031Z,1513265978.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:38.510Z,1513265978.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:38.850Z,1513265978.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:39.243Z,1513265979.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:39.645Z,1513265979.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:40.105Z,1513265980.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:40.426Z,1513265980.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:40.850Z,1513265980.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:41.231Z,1513265981.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:41.640Z,1513265981.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:42.116Z,1513265982.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:42.458Z,1513265982.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:42.835Z,1513265982.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:43.235Z,1513265983.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:43.618Z,1513265983.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:44.016Z,1513265984.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:44.430Z,1513265984.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:44.863Z,1513265984.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:45.246Z,1513265985.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:45.615Z,1513265985.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:46.118Z,1513265986.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:46.422Z,1513265986.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:46.830Z,1513265986.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:47.251Z,1513265987.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:47.636Z,1513265987.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:48.078Z,1513265988.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:48.448Z,1513265988.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:48.826Z,1513265988.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:49.242Z,1513265989.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:49.619Z,1513265989.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:50.013Z,1513265990.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:50.536Z,1513265990.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:50.851Z,1513265990.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:51.239Z,1513265991.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:51.604Z,1513265991.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:52.032Z,1513265992.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:52.536Z,1513265992.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:52.840Z,1513265992.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:53.227Z,1513265993.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:53.632Z,1513265993.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:54.025Z,1513265994.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:57.483Z,1513265997.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:57.619Z,1513265997.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:57.984Z,1513265997.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:58.382Z,1513265998.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:58.784Z,1513265998.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:59.186Z,1513265999.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:59.594Z,1513265999.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:39:59.992Z,1513265999.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:00.407Z,1513266000.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:00.778Z,1513266000.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:01.174Z,1513266001.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:01.577Z,1513266001.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:01.998Z,1513266001.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:02.383Z,1513266002.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:02.792Z,1513266002.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:03.196Z,1513266003.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:03.583Z,1513266003.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:03.983Z,1513266003.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:04.455Z,1513266004.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:04.790Z,1513266004.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:05.186Z,1513266005.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:05.595Z,1513266005.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:05.992Z,1513266005.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:06.504Z,1513266006.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:06.785Z,1513266006.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:07.186Z,1513266007.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:07.584Z,1513266007.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:07.989Z,1513266007.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:08.435Z,1513266008.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:08.798Z,1513266008.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:09.198Z,1513266009.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:09.615Z,1513266009.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:09.980Z,1513266009.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:10.404Z,1513266010.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:10.818Z,1513266010.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:11.197Z,1513266011.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:11.623Z,1513266011.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:12.007Z,1513266012.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:12.404Z,1513266012.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:12.840Z,1513266012.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:13.194Z,1513266013.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:13.575Z,1513266013.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:13.978Z,1513266013.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:14.392Z,1513266014.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:14.800Z,1513266014.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:15.194Z,1513266015.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:15.584Z,1513266015.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:16.042Z,1513266016.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:16.378Z,1513266016.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:16.790Z,1513266016.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:17.179Z,1513266017.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:17.592Z,1513266017.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:17.987Z,1513266017.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:18.479Z,1513266018.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:18.803Z,1513266018.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:19.180Z,1513266019.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:19.591Z,1513266019.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:20.004Z,1513266020.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:20.477Z,1513266020.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:20.803Z,1513266020.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:21.203Z,1513266021.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:21.575Z,1513266021.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:21.974Z,1513266021.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:22.383Z,1513266022.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:22.787Z,1513266022.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:23.183Z,1513266023.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:23.593Z,1513266023.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:23.992Z,1513266023.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:24.388Z,1513266024.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:24.817Z,1513266024.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:25.183Z,1513266025.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:25.644Z,1513266025.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:25.979Z,1513266025.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:26.384Z,1513266026.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:26.784Z,1513266026.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:27.186Z,1513266027.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:27.579Z,1513266027.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:27.982Z,1513266027.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:28.379Z,1513266028.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:28.830Z,1513266028.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:29.177Z,1513266029.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:29.592Z,1513266029.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:29.992Z,1513266029.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:30.392Z,1513266030.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:30.811Z,1513266030.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:31.183Z,1513266031.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:31.578Z,1513266031.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:32.039Z,1513266032.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:32.454Z,1513266032.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:32.811Z,1513266032.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:33.223Z,1513266033.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:33.580Z,1513266033.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:34.005Z,1513266034.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:34.455Z,1513266034.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:34.455Z,1513266034.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 302
2017-12-14T15:40:34.456Z,1513266034.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:40:34.466Z,1513266034.466 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:34.466Z,1513266034.466 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 302
2017-12-14T15:40:34.466Z,1513266034.466 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:40:34.468Z,1513266034.468 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:34.468Z,1513266034.468 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 302
2017-12-14T15:40:34.468Z,1513266034.468 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:40:34.496Z,1513266034.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:40:34.505Z,1513266034.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:40:34.505Z,1513266034.505 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:40:34.809Z,1513266034.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:40:34.809Z,1513266034.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 302
2017-12-14T15:40:34.810Z,1513266034.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:40:34.810Z,1513266034.810 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 302
2017-12-14T15:40:34.810Z,1513266034.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:40:34.810Z,1513266034.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 302
2017-12-14T15:40:35.228Z,1513266035.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:40:35.228Z,1513266035.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:40:35.241Z,1513266035.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:40:35.241Z,1513266035.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:40:35.242Z,1513266035.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:40:35.242Z,1513266035.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:40:35.243Z,1513266035.243 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:40:35.243Z,1513266035.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:40:35.243Z,1513266035.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:40:35.603Z,1513266035.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:35.997Z,1513266035.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:36.405Z,1513266036.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:36.777Z,1513266036.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:37.180Z,1513266037.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:37.576Z,1513266037.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:37.978Z,1513266037.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:38.408Z,1513266038.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:38.811Z,1513266038.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:39.187Z,1513266039.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:39.580Z,1513266039.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:39.984Z,1513266039.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:40.383Z,1513266040.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:40.780Z,1513266040.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:41.187Z,1513266041.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:41.618Z,1513266041.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:41.991Z,1513266041.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:42.442Z,1513266042.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:42.795Z,1513266042.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:43.174Z,1513266043.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:43.572Z,1513266043.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:43.980Z,1513266043.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:44.382Z,1513266044.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:44.812Z,1513266044.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:45.200Z,1513266045.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:45.579Z,1513266045.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:45.981Z,1513266045.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:46.462Z,1513266046.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:46.786Z,1513266046.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:47.188Z,1513266047.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:47.594Z,1513266047.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:48.031Z,1513266048.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:48.463Z,1513266048.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:48.813Z,1513266048.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:49.195Z,1513266049.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:49.586Z,1513266049.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:49.987Z,1513266049.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:50.407Z,1513266050.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:50.797Z,1513266050.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:51.202Z,1513266051.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:51.576Z,1513266051.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:51.978Z,1513266051.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:52.378Z,1513266052.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:52.782Z,1513266052.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:53.215Z,1513266053.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:53.592Z,1513266053.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:53.984Z,1513266053.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:54.424Z,1513266054.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:57.818Z,1513266057.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:57.948Z,1513266057.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:58.348Z,1513266058.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:58.737Z,1513266058.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:59.159Z,1513266059.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:59.510Z,1513266059.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:40:59.938Z,1513266059.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:00.317Z,1513266060.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:00.716Z,1513266060.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:01.116Z,1513266061.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:01.516Z,1513266061.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:01.915Z,1513266061.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:02.312Z,1513266062.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:02.716Z,1513266062.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:03.140Z,1513266063.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:03.516Z,1513266063.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:03.920Z,1513266063.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:04.314Z,1513266064.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:04.723Z,1513266064.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:05.123Z,1513266065.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:05.513Z,1513266065.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:05.913Z,1513266065.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:06.316Z,1513266066.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:06.716Z,1513266066.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:07.117Z,1513266067.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:07.513Z,1513266067.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:07.915Z,1513266067.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:08.358Z,1513266068.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:08.723Z,1513266068.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:09.204Z,1513266069.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:09.521Z,1513266069.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:09.927Z,1513266069.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:10.327Z,1513266070.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:10.764Z,1513266070.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:11.127Z,1513266071.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:11.514Z,1513266071.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:11.919Z,1513266071.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:12.321Z,1513266072.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:12.724Z,1513266072.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:13.121Z,1513266073.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:13.550Z,1513266073.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:13.971Z,1513266073.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:14.322Z,1513266074.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:14.722Z,1513266074.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:15.125Z,1513266075.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:15.505Z,1513266075.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:15.907Z,1513266075.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:16.339Z,1513266076.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:16.736Z,1513266076.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:17.159Z,1513266077.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:17.520Z,1513266077.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:17.923Z,1513266077.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:18.393Z,1513266078.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:18.739Z,1513266078.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:19.154Z,1513266079.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:19.546Z,1513266079.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:19.954Z,1513266079.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:20.391Z,1513266080.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:20.774Z,1513266080.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:21.132Z,1513266081.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:21.575Z,1513266081.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:21.932Z,1513266081.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:22.398Z,1513266082.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:22.748Z,1513266082.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:23.152Z,1513266083.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:23.583Z,1513266083.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:23.949Z,1513266083.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:24.350Z,1513266084.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:24.740Z,1513266084.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:25.146Z,1513266085.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:25.513Z,1513266085.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:25.915Z,1513266085.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:26.320Z,1513266086.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:26.737Z,1513266086.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:27.132Z,1513266087.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:27.536Z,1513266087.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:27.948Z,1513266087.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:28.341Z,1513266088.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:28.749Z,1513266088.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:29.158Z,1513266089.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:29.571Z,1513266089.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:29.922Z,1513266089.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:30.415Z,1513266090.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:30.784Z,1513266090.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:31.187Z,1513266091.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:31.539Z,1513266091.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:31.942Z,1513266091.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:32.330Z,1513266092.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:32.755Z,1513266092.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:33.124Z,1513266093.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:33.563Z,1513266093.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:33.943Z,1513266093.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:34.352Z,1513266094.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:34.758Z,1513266094.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:35.119Z,1513266095.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:35.518Z,1513266095.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:35.938Z,1513266095.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:36.331Z,1513266096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:36.735Z,1513266096.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:37.168Z,1513266097.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:37.540Z,1513266097.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:37.942Z,1513266097.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:38.351Z,1513266098.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:38.732Z,1513266098.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:39.149Z,1513266099.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:39.543Z,1513266099.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:39.934Z,1513266099.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:40.327Z,1513266100.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:40.739Z,1513266100.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:41.139Z,1513266101.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:41.527Z,1513266101.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:41.924Z,1513266101.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:42.332Z,1513266102.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:42.795Z,1513266102.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:43.151Z,1513266103.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:43.548Z,1513266103.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:43.912Z,1513266103.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:44.351Z,1513266104.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:44.752Z,1513266104.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:45.123Z,1513266105.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:45.548Z,1513266105.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:45.916Z,1513266105.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:46.363Z,1513266106.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:46.752Z,1513266106.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:47.155Z,1513266107.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:47.514Z,1513266107.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:47.919Z,1513266107.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:48.365Z,1513266108.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:48.735Z,1513266108.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:49.126Z,1513266109.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:49.514Z,1513266109.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:49.916Z,1513266109.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:50.325Z,1513266110.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:50.724Z,1513266110.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:51.136Z,1513266111.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:51.520Z,1513266111.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:51.919Z,1513266111.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:52.320Z,1513266112.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:52.757Z,1513266112.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:53.129Z,1513266113.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:53.519Z,1513266113.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:53.926Z,1513266113.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:54.378Z,1513266114.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:54.750Z,1513266114.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:58.143Z,1513266118.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:58.275Z,1513266118.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:58.667Z,1513266118.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:59.050Z,1513266119.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:59.493Z,1513266119.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:41:59.852Z,1513266119.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:00.328Z,1513266120.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:00.657Z,1513266120.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:01.064Z,1513266121.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:01.459Z,1513266121.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:01.849Z,1513266121.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:02.327Z,1513266122.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:02.661Z,1513266122.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:03.036Z,1513266123.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:03.460Z,1513266123.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:03.877Z,1513266123.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:04.260Z,1513266124.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:04.702Z,1513266124.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:05.039Z,1513266125.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:05.443Z,1513266125.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:05.865Z,1513266125.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:06.269Z,1513266126.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:06.687Z,1513266126.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:07.087Z,1513266127.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:07.471Z,1513266127.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:07.844Z,1513266127.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:08.242Z,1513266128.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:08.640Z,1513266128.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:09.084Z,1513266129.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:09.471Z,1513266129.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:09.852Z,1513266129.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:10.293Z,1513266130.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:10.647Z,1513266130.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:11.047Z,1513266131.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:11.443Z,1513266131.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:11.854Z,1513266131.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:12.247Z,1513266132.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:12.683Z,1513266132.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:13.055Z,1513266133.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:13.457Z,1513266133.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:13.855Z,1513266133.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:14.248Z,1513266134.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:14.655Z,1513266134.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:15.080Z,1513266135.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:15.452Z,1513266135.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:15.856Z,1513266135.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:16.256Z,1513266136.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:16.658Z,1513266136.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:17.051Z,1513266137.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:17.451Z,1513266137.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:17.848Z,1513266137.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:18.255Z,1513266138.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:18.657Z,1513266138.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:19.058Z,1513266139.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:19.456Z,1513266139.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:19.898Z,1513266139.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:20.247Z,1513266140.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:20.647Z,1513266140.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:21.044Z,1513266141.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:21.454Z,1513266141.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:21.857Z,1513266141.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:22.259Z,1513266142.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:22.647Z,1513266142.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:23.118Z,1513266143.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:23.450Z,1513266143.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:23.850Z,1513266143.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:24.254Z,1513266144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:24.662Z,1513266144.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:25.064Z,1513266145.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:25.465Z,1513266145.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:25.858Z,1513266145.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:26.279Z,1513266146.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:26.683Z,1513266146.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:27.046Z,1513266147.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:27.502Z,1513266147.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:27.858Z,1513266147.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:28.260Z,1513266148.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:28.694Z,1513266148.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:29.056Z,1513266149.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:29.482Z,1513266149.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:29.856Z,1513266149.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:30.248Z,1513266150.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:30.662Z,1513266150.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:31.062Z,1513266151.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:31.458Z,1513266151.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:31.843Z,1513266151.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:32.255Z,1513266152.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:32.703Z,1513266152.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:33.044Z,1513266153.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:33.460Z,1513266153.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:33.860Z,1513266153.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:34.252Z,1513266154.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:34.651Z,1513266154.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:35.054Z,1513266155.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:35.454Z,1513266155.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:35.879Z,1513266155.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:36.263Z,1513266156.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:36.656Z,1513266156.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:37.049Z,1513266157.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:37.462Z,1513266157.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:37.883Z,1513266157.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:38.244Z,1513266158.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:38.644Z,1513266158.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:39.081Z,1513266159.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:39.453Z,1513266159.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:39.861Z,1513266159.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:40.263Z,1513266160.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:40.659Z,1513266160.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:41.043Z,1513266161.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:41.451Z,1513266161.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:41.844Z,1513266161.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:42.306Z,1513266162.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:42.663Z,1513266162.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:43.068Z,1513266163.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:43.462Z,1513266163.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:43.835Z,1513266163.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:44.251Z,1513266164.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:44.652Z,1513266164.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:45.134Z,1513266165.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:45.499Z,1513266165.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:45.874Z,1513266165.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:46.248Z,1513266166.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:46.655Z,1513266166.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:47.048Z,1513266167.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:47.443Z,1513266167.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:47.844Z,1513266167.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:48.244Z,1513266168.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:48.708Z,1513266168.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:49.058Z,1513266169.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:49.463Z,1513266169.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:49.927Z,1513266169.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:50.263Z,1513266170.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:50.679Z,1513266170.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:51.039Z,1513266171.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:51.505Z,1513266171.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:51.910Z,1513266171.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:52.262Z,1513266172.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:52.663Z,1513266172.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:53.037Z,1513266173.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:53.447Z,1513266173.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:53.851Z,1513266173.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:53.874Z,1513266173.874 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:42:53.874Z,1513266173.874 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:42:53.875Z,1513266173.875 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:42:53.875Z,1513266173.875 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:42:54.242Z,1513266174.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:54.245Z,1513266174.245 [Default:CheckIn:D] Stopped
2017-12-14T15:42:54.246Z,1513266174.246 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:42:54.644Z,1513266174.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 909.647591 min 
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn:E] Stopped
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn] Stopped
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn](INFO): Running loop #88
2017-12-14T15:42:54.648Z,1513266174.648 [Default:CheckIn] Running Loop=88
2017-12-14T15:42:54.650Z,1513266174.650 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:42:54.650Z,1513266174.650 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:42:55.104Z,1513266175.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:58.531Z,1513266178.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:58.679Z,1513266178.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:59.010Z,1513266179.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:59.408Z,1513266179.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:42:59.843Z,1513266179.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:00.204Z,1513266180.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:00.685Z,1513266180.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:01.013Z,1513266181.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:01.460Z,1513266181.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:01.811Z,1513266181.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:02.211Z,1513266182.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:02.611Z,1513266182.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:03.015Z,1513266183.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:03.423Z,1513266183.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:03.817Z,1513266183.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:04.212Z,1513266184.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:04.639Z,1513266184.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:05.003Z,1513266185.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:05.403Z,1513266185.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:05.798Z,1513266185.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:06.208Z,1513266186.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:06.608Z,1513266186.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:07.004Z,1513266187.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:07.403Z,1513266187.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:07.610Z,1513266187.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:07.891Z,1513266187.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:08.227Z,1513266188.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:08.407Z,1513266188.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:08.605Z,1513266188.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:08.813Z,1513266188.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:09.019Z,1513266189.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:09.418Z,1513266189.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:09.610Z,1513266189.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:09.822Z,1513266189.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:10.215Z,1513266190.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:10.405Z,1513266190.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:10.608Z,1513266190.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:10.809Z,1513266190.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:11.032Z,1513266191.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:11.416Z,1513266191.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:11.827Z,1513266191.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:12.259Z,1513266192.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:12.618Z,1513266192.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:13.061Z,1513266193.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:13.412Z,1513266193.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:13.839Z,1513266193.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:14.267Z,1513266194.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:14.614Z,1513266194.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:15.020Z,1513266195.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:15.419Z,1513266195.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:15.819Z,1513266195.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:16.217Z,1513266196.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:16.613Z,1513266196.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:17.023Z,1513266197.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:17.475Z,1513266197.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:17.819Z,1513266197.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:18.212Z,1513266198.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:18.619Z,1513266198.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:19.023Z,1513266199.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:19.423Z,1513266199.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:19.817Z,1513266199.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:20.216Z,1513266200.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:20.670Z,1513266200.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:21.026Z,1513266201.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:21.425Z,1513266201.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:21.622Z,1513266201.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:21.830Z,1513266201.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:22.248Z,1513266202.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:22.419Z,1513266202.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:22.600Z,1513266202.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:22.829Z,1513266202.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:23.023Z,1513266203.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:23.403Z,1513266203.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:23.795Z,1513266203.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:24.241Z,1513266204.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:24.609Z,1513266204.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:25.042Z,1513266205.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:25.412Z,1513266205.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:25.806Z,1513266205.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:26.204Z,1513266206.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:26.601Z,1513266206.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:27.057Z,1513266207.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:27.415Z,1513266207.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:27.815Z,1513266207.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:28.211Z,1513266208.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:28.606Z,1513266208.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:29.015Z,1513266209.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:29.415Z,1513266209.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:29.816Z,1513266209.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:30.254Z,1513266210.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:30.606Z,1513266210.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:31.019Z,1513266211.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:31.427Z,1513266211.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:31.824Z,1513266211.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:32.216Z,1513266212.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:32.614Z,1513266212.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:33.023Z,1513266213.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:33.479Z,1513266213.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:33.812Z,1513266213.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:34.258Z,1513266214.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:34.611Z,1513266214.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:35.016Z,1513266215.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:35.439Z,1513266215.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:35.439Z,1513266215.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 303
2017-12-14T15:43:35.439Z,1513266215.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:43:35.441Z,1513266215.441 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:35.441Z,1513266215.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 303
2017-12-14T15:43:35.441Z,1513266215.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:43:35.443Z,1513266215.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:35.443Z,1513266215.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 303
2017-12-14T15:43:35.443Z,1513266215.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:43:35.455Z,1513266215.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:43:35.455Z,1513266215.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:43:35.455Z,1513266215.455 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:43:35.614Z,1513266215.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:35.833Z,1513266215.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:43:35.834Z,1513266215.834 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 303
2017-12-14T15:43:35.834Z,1513266215.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:43:35.834Z,1513266215.834 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 303
2017-12-14T15:43:35.835Z,1513266215.835 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:43:35.835Z,1513266215.835 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 303
2017-12-14T15:43:36.241Z,1513266216.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:43:36.242Z,1513266216.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:43:36.242Z,1513266216.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:43:36.242Z,1513266216.242 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:43:36.243Z,1513266216.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:43:36.243Z,1513266216.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:43:36.243Z,1513266216.243 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:43:36.244Z,1513266216.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:43:36.244Z,1513266216.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:43:36.410Z,1513266216.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:36.681Z,1513266216.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:36.829Z,1513266216.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:37.009Z,1513266217.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:37.433Z,1513266217.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:37.625Z,1513266217.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:37.805Z,1513266217.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:38.201Z,1513266218.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:38.421Z,1513266218.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:38.605Z,1513266218.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:38.825Z,1513266218.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:39.012Z,1513266219.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:39.414Z,1513266219.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:39.855Z,1513266219.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:40.216Z,1513266220.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:40.615Z,1513266220.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:41.013Z,1513266221.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:41.420Z,1513266221.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:41.817Z,1513266221.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:42.216Z,1513266222.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:42.615Z,1513266222.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:43.074Z,1513266223.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:43.427Z,1513266223.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:43.821Z,1513266223.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:44.201Z,1513266224.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:44.643Z,1513266224.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:45.001Z,1513266225.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:45.421Z,1513266225.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:45.831Z,1513266225.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:46.280Z,1513266226.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:46.603Z,1513266226.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:47.007Z,1513266227.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:47.403Z,1513266227.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:47.815Z,1513266227.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:48.216Z,1513266228.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:48.612Z,1513266228.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:49.015Z,1513266229.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:49.182Z,1513266229.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:49.490Z,1513266229.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:49.848Z,1513266229.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:49.977Z,1513266229.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:43:50.207Z,1513266230.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:50.612Z,1513266230.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:51.019Z,1513266231.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:51.427Z,1513266231.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:51.823Z,1513266231.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:52.214Z,1513266232.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:52.611Z,1513266232.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:53.016Z,1513266233.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:53.423Z,1513266233.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:53.828Z,1513266233.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:54.218Z,1513266234.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:54.618Z,1513266234.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:54.966Z,1513266234.966 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T15:43:54.966Z,1513266234.966 [NAL9602] Data Fault, FailCount= 3
2017-12-14T15:43:54.966Z,1513266234.966 [NAL9602](ERROR): Data Fault
2017-12-14T15:43:55.024Z,1513266235.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:55.046Z,1513266235.046 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T15:43:55.369Z,1513266235.369 [NAL9602](INFO): Powering down
2017-12-14T15:43:55.421Z,1513266235.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:58.904Z,1513266238.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:59.076Z,1513266239.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:59.089Z,1513266239.089 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T15:43:59.089Z,1513266239.089 [NAL9602] No Fault, FailCount= 3
2017-12-14T15:43:59.494Z,1513266239.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:43:59.847Z,1513266239.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:00.282Z,1513266240.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:00.655Z,1513266240.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:01.048Z,1513266241.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:01.449Z,1513266241.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:01.844Z,1513266241.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:02.250Z,1513266242.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:02.655Z,1513266242.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:03.052Z,1513266243.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:03.446Z,1513266243.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:03.846Z,1513266243.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:04.251Z,1513266244.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:04.655Z,1513266244.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:05.047Z,1513266245.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:05.451Z,1513266245.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:05.933Z,1513266245.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:06.245Z,1513266246.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:06.655Z,1513266246.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:07.046Z,1513266247.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:07.450Z,1513266247.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:07.852Z,1513266247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:08.252Z,1513266248.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:08.687Z,1513266248.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:09.046Z,1513266249.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:09.451Z,1513266249.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:09.851Z,1513266249.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:10.246Z,1513266250.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:10.644Z,1513266250.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:11.048Z,1513266251.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:11.446Z,1513266251.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:11.845Z,1513266251.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:12.272Z,1513266252.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:12.659Z,1513266252.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:13.094Z,1513266253.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:13.450Z,1513266253.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:13.598Z,1513266253.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:13.847Z,1513266253.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:14.247Z,1513266254.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:14.393Z,1513266254.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:14.648Z,1513266254.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:14.797Z,1513266254.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:15.055Z,1513266255.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:15.496Z,1513266255.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:15.593Z,1513266255.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:15.853Z,1513266255.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:16.252Z,1513266256.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:16.391Z,1513266256.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:16.659Z,1513266256.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:16.833Z,1513266256.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:17.055Z,1513266257.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:17.451Z,1513266257.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:17.630Z,1513266257.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:17.865Z,1513266257.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:18.238Z,1513266258.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:18.427Z,1513266258.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:18.715Z,1513266258.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:18.843Z,1513266258.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:19.038Z,1513266259.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:19.495Z,1513266259.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:19.638Z,1513266259.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:19.857Z,1513266259.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:20.255Z,1513266260.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:20.435Z,1513266260.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:20.703Z,1513266260.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:20.845Z,1513266260.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:44:21.048Z,1513266261.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:21.450Z,1513266261.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:21.879Z,1513266261.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:22.251Z,1513266262.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:22.696Z,1513266262.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:23.050Z,1513266263.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:23.454Z,1513266263.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:23.854Z,1513266263.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:24.256Z,1513266264.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:24.668Z,1513266264.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:25.043Z,1513266265.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:25.410Z,1513266265.410 [NAL9602](INFO): Powering up NAL9602
2017-12-14T15:44:25.447Z,1513266265.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:25.872Z,1513266265.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:26.242Z,1513266266.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:26.670Z,1513266266.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:27.046Z,1513266267.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:27.442Z,1513266267.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:27.846Z,1513266267.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:28.248Z,1513266268.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:28.685Z,1513266268.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:29.108Z,1513266269.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:29.449Z,1513266269.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:29.848Z,1513266269.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:30.251Z,1513266270.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:30.659Z,1513266270.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:31.072Z,1513266271.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:31.448Z,1513266271.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:31.895Z,1513266271.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:32.255Z,1513266272.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:32.659Z,1513266272.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:33.048Z,1513266273.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:33.450Z,1513266273.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:33.849Z,1513266273.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:34.248Z,1513266274.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:34.652Z,1513266274.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:35.114Z,1513266275.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:35.458Z,1513266275.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:35.853Z,1513266275.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:36.255Z,1513266276.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:36.618Z,1513266276.618 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:44:36.663Z,1513266276.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:37.053Z,1513266277.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:37.461Z,1513266277.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:37.859Z,1513266277.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:38.355Z,1513266278.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:38.652Z,1513266278.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:39.054Z,1513266279.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:39.455Z,1513266279.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:39.869Z,1513266279.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:40.260Z,1513266280.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:40.667Z,1513266280.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:41.054Z,1513266281.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:41.495Z,1513266281.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:41.887Z,1513266281.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:42.263Z,1513266282.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:42.658Z,1513266282.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:43.088Z,1513266283.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:43.470Z,1513266283.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:43.869Z,1513266283.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:44.279Z,1513266284.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:44.695Z,1513266284.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:45.068Z,1513266285.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:45.450Z,1513266285.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:45.861Z,1513266285.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:46.267Z,1513266286.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:46.662Z,1513266286.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:47.051Z,1513266287.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:47.452Z,1513266287.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:47.918Z,1513266287.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:48.248Z,1513266288.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:48.262Z,1513266288.262 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T15:44:48.262Z,1513266288.262 [DropWeight] No Fault, FailCount= 1
2017-12-14T15:44:48.668Z,1513266288.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:49.064Z,1513266289.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:49.461Z,1513266289.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:49.847Z,1513266289.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:50.260Z,1513266290.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:50.649Z,1513266290.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:51.102Z,1513266291.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:51.460Z,1513266291.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:51.860Z,1513266291.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:52.254Z,1513266292.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:52.663Z,1513266292.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:53.055Z,1513266293.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:53.478Z,1513266293.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:53.883Z,1513266293.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:54.308Z,1513266294.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:54.670Z,1513266294.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:55.059Z,1513266295.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:55.464Z,1513266295.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:58.968Z,1513266298.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:59.108Z,1513266299.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:59.444Z,1513266299.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:44:59.849Z,1513266299.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:00.252Z,1513266300.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:00.671Z,1513266300.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:01.055Z,1513266301.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:01.455Z,1513266301.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:01.863Z,1513266301.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:02.272Z,1513266302.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:02.667Z,1513266302.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:03.061Z,1513266303.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:03.438Z,1513266303.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:03.881Z,1513266303.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:04.280Z,1513266304.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:04.644Z,1513266304.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:05.068Z,1513266305.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:05.472Z,1513266305.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:05.830Z,1513266305.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:06.272Z,1513266306.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:06.635Z,1513266306.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:07.131Z,1513266307.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:07.466Z,1513266307.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:07.863Z,1513266307.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:08.238Z,1513266308.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:08.639Z,1513266308.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:09.040Z,1513266309.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:09.451Z,1513266309.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:09.854Z,1513266309.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:10.291Z,1513266310.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:10.653Z,1513266310.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:11.049Z,1513266311.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:11.450Z,1513266311.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:11.851Z,1513266311.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:12.250Z,1513266312.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:12.651Z,1513266312.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:13.053Z,1513266313.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:13.508Z,1513266313.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:13.859Z,1513266313.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:14.258Z,1513266314.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:14.652Z,1513266314.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:15.058Z,1513266315.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:15.473Z,1513266315.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:15.859Z,1513266315.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:16.257Z,1513266316.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:16.707Z,1513266316.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:17.036Z,1513266317.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:17.463Z,1513266317.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:17.832Z,1513266317.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:18.237Z,1513266318.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:18.634Z,1513266318.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:19.061Z,1513266319.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:19.460Z,1513266319.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:19.918Z,1513266319.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:20.258Z,1513266320.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:20.634Z,1513266320.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:21.059Z,1513266321.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:21.439Z,1513266321.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:21.864Z,1513266321.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:22.264Z,1513266322.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:22.667Z,1513266322.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:23.078Z,1513266323.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:23.440Z,1513266323.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:23.839Z,1513266323.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:24.243Z,1513266324.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:24.639Z,1513266324.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:25.045Z,1513266325.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:25.466Z,1513266325.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:25.870Z,1513266325.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:26.339Z,1513266326.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:26.657Z,1513266326.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:27.053Z,1513266327.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:27.455Z,1513266327.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:27.883Z,1513266327.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:28.260Z,1513266328.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:28.683Z,1513266328.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:29.051Z,1513266329.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:29.483Z,1513266329.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:29.852Z,1513266329.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:30.240Z,1513266330.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:30.644Z,1513266330.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:31.061Z,1513266331.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:31.459Z,1513266331.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:31.859Z,1513266331.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:32.249Z,1513266332.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:32.639Z,1513266332.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:33.054Z,1513266333.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:33.452Z,1513266333.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:33.855Z,1513266333.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:34.255Z,1513266334.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:34.667Z,1513266334.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:35.046Z,1513266335.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:35.446Z,1513266335.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:35.850Z,1513266335.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:36.280Z,1513266336.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:36.651Z,1513266336.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:37.055Z,1513266337.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:37.456Z,1513266337.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:37.890Z,1513266337.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:38.251Z,1513266338.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:38.651Z,1513266338.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:39.036Z,1513266339.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:39.514Z,1513266339.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:39.856Z,1513266339.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:40.256Z,1513266340.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:40.671Z,1513266340.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:41.036Z,1513266341.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:41.435Z,1513266341.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:41.836Z,1513266341.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:42.235Z,1513266342.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:42.715Z,1513266342.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:43.064Z,1513266343.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:43.464Z,1513266343.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:43.865Z,1513266343.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:44.241Z,1513266344.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:44.640Z,1513266344.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:45.041Z,1513266345.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:45.439Z,1513266345.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:45.886Z,1513266345.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:46.267Z,1513266346.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:46.666Z,1513266346.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:47.040Z,1513266347.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:47.440Z,1513266347.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:47.839Z,1513266347.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:48.290Z,1513266348.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:48.638Z,1513266348.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:49.075Z,1513266349.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:49.444Z,1513266349.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:49.897Z,1513266349.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:50.240Z,1513266350.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:50.651Z,1513266350.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:51.075Z,1513266351.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:51.438Z,1513266351.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:51.882Z,1513266351.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:52.244Z,1513266352.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:52.742Z,1513266352.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:53.047Z,1513266353.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:53.442Z,1513266353.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:53.844Z,1513266353.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:54.247Z,1513266354.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:54.646Z,1513266354.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:55.052Z,1513266355.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:55.500Z,1513266355.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:55.863Z,1513266355.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:59.342Z,1513266359.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:59.475Z,1513266359.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:45:59.828Z,1513266359.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:00.267Z,1513266360.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:00.648Z,1513266360.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:01.016Z,1513266361.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:01.419Z,1513266361.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:01.863Z,1513266361.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:02.223Z,1513266362.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:02.620Z,1513266362.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:03.025Z,1513266363.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:03.446Z,1513266363.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:03.849Z,1513266363.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:04.223Z,1513266364.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:04.620Z,1513266364.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:05.123Z,1513266365.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:05.418Z,1513266365.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:05.821Z,1513266365.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:06.233Z,1513266366.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:06.632Z,1513266366.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:07.024Z,1513266367.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:07.429Z,1513266367.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:07.824Z,1513266367.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:08.240Z,1513266368.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:08.622Z,1513266368.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:09.042Z,1513266369.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:09.438Z,1513266369.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:09.845Z,1513266369.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:10.226Z,1513266370.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:10.620Z,1513266370.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:11.043Z,1513266371.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:11.456Z,1513266371.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:11.848Z,1513266371.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:12.243Z,1513266372.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:12.671Z,1513266372.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:13.034Z,1513266373.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:13.451Z,1513266373.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:13.838Z,1513266373.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:14.255Z,1513266374.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:14.656Z,1513266374.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:15.034Z,1513266375.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:15.437Z,1513266375.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:15.834Z,1513266375.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:16.220Z,1513266376.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:16.627Z,1513266376.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:17.040Z,1513266377.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:17.425Z,1513266377.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:17.931Z,1513266377.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:18.334Z,1513266378.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:18.639Z,1513266378.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:19.031Z,1513266379.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:19.478Z,1513266379.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:19.840Z,1513266379.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:20.255Z,1513266380.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:20.675Z,1513266380.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:21.048Z,1513266381.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:21.458Z,1513266381.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:21.880Z,1513266381.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:22.239Z,1513266382.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:22.659Z,1513266382.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:23.023Z,1513266383.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:23.419Z,1513266383.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:23.869Z,1513266383.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:24.247Z,1513266384.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:24.686Z,1513266384.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:25.031Z,1513266385.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:25.429Z,1513266385.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:25.828Z,1513266385.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:26.242Z,1513266386.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:26.636Z,1513266386.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:27.052Z,1513266387.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:27.481Z,1513266387.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:27.835Z,1513266387.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:28.235Z,1513266388.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:28.620Z,1513266388.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:29.040Z,1513266389.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:29.455Z,1513266389.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:29.847Z,1513266389.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:30.249Z,1513266390.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:30.663Z,1513266390.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:31.049Z,1513266391.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:31.446Z,1513266391.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:31.847Z,1513266391.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:32.250Z,1513266392.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:32.639Z,1513266392.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:33.039Z,1513266393.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:33.446Z,1513266393.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:33.872Z,1513266393.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:34.268Z,1513266394.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:34.688Z,1513266394.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:35.107Z,1513266395.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:35.449Z,1513266395.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:35.868Z,1513266395.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:36.278Z,1513266396.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:36.278Z,1513266396.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 304
2017-12-14T15:46:36.278Z,1513266396.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:46:36.280Z,1513266396.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:36.280Z,1513266396.280 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 304
2017-12-14T15:46:36.280Z,1513266396.280 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:46:36.315Z,1513266396.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:36.315Z,1513266396.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 304
2017-12-14T15:46:36.315Z,1513266396.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:46:36.358Z,1513266396.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:46:36.358Z,1513266396.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:46:36.358Z,1513266396.358 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:46:36.711Z,1513266396.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:46:36.711Z,1513266396.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 304
2017-12-14T15:46:36.712Z,1513266396.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:46:36.712Z,1513266396.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 304
2017-12-14T15:46:36.712Z,1513266396.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:46:36.721Z,1513266396.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 304
2017-12-14T15:46:37.065Z,1513266397.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:46:37.066Z,1513266397.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:46:37.066Z,1513266397.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:46:37.066Z,1513266397.066 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:46:37.067Z,1513266397.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:46:37.067Z,1513266397.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:46:37.067Z,1513266397.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:46:37.068Z,1513266397.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:46:37.068Z,1513266397.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:46:37.462Z,1513266397.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:37.859Z,1513266397.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:38.224Z,1513266398.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:38.639Z,1513266398.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:39.040Z,1513266399.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:39.451Z,1513266399.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:39.847Z,1513266399.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:40.239Z,1513266400.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:40.640Z,1513266400.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:41.059Z,1513266401.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:41.431Z,1513266401.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:41.843Z,1513266401.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:42.243Z,1513266402.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:42.649Z,1513266402.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:43.049Z,1513266403.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:43.454Z,1513266403.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:43.842Z,1513266403.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:44.246Z,1513266404.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:44.650Z,1513266404.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:45.032Z,1513266405.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:45.471Z,1513266405.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:45.863Z,1513266405.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:46.227Z,1513266406.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:46.635Z,1513266406.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:47.079Z,1513266407.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:47.464Z,1513266407.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:47.882Z,1513266407.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:48.232Z,1513266408.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:48.642Z,1513266408.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:49.029Z,1513266409.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:49.433Z,1513266409.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:49.832Z,1513266409.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:50.235Z,1513266410.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:50.631Z,1513266410.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:51.036Z,1513266411.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:51.440Z,1513266411.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:51.839Z,1513266411.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:52.239Z,1513266412.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:52.637Z,1513266412.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:53.031Z,1513266413.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:53.428Z,1513266413.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:53.839Z,1513266413.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:54.247Z,1513266414.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:54.647Z,1513266414.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:55.030Z,1513266415.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:55.413Z,1513266415.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:55.891Z,1513266415.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:56.240Z,1513266416.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:59.834Z,1513266419.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:46:59.967Z,1513266419.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:00.321Z,1513266420.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:00.759Z,1513266420.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:01.113Z,1513266421.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:01.551Z,1513266421.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:01.907Z,1513266421.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:02.311Z,1513266422.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:02.716Z,1513266422.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:03.116Z,1513266423.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:03.516Z,1513266423.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:03.906Z,1513266423.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:04.306Z,1513266424.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:04.725Z,1513266424.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:05.134Z,1513266425.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:05.526Z,1513266425.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:05.919Z,1513266425.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:06.317Z,1513266426.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:06.802Z,1513266426.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:07.135Z,1513266427.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:07.534Z,1513266427.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:07.907Z,1513266427.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:08.331Z,1513266428.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:08.712Z,1513266428.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:09.115Z,1513266429.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:09.508Z,1513266429.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:09.959Z,1513266429.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:10.315Z,1513266430.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:10.713Z,1513266430.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:11.112Z,1513266431.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:11.512Z,1513266431.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:11.939Z,1513266431.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:12.317Z,1513266432.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:12.713Z,1513266432.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:13.121Z,1513266433.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:13.517Z,1513266433.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:13.915Z,1513266433.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:14.314Z,1513266434.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:14.720Z,1513266434.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:15.122Z,1513266435.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:15.517Z,1513266435.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:15.911Z,1513266435.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:16.359Z,1513266436.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:16.709Z,1513266436.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:17.112Z,1513266437.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:17.519Z,1513266437.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:17.904Z,1513266437.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:18.299Z,1513266438.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:18.712Z,1513266438.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:19.119Z,1513266439.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:19.536Z,1513266439.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:19.911Z,1513266439.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:20.299Z,1513266440.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:20.713Z,1513266440.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:21.132Z,1513266441.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:21.523Z,1513266441.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:22.021Z,1513266442.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:22.340Z,1513266442.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:22.743Z,1513266442.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:23.173Z,1513266443.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:23.537Z,1513266443.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:23.940Z,1513266443.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:24.313Z,1513266444.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:24.713Z,1513266444.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:25.113Z,1513266445.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:25.512Z,1513266445.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:25.984Z,1513266445.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:26.316Z,1513266446.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:26.720Z,1513266446.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:27.120Z,1513266447.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:27.520Z,1513266447.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:27.915Z,1513266447.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:28.305Z,1513266448.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:28.716Z,1513266448.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:29.120Z,1513266449.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:29.522Z,1513266449.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:29.911Z,1513266449.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:30.306Z,1513266450.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:30.727Z,1513266450.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:31.179Z,1513266451.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:31.521Z,1513266451.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:31.915Z,1513266451.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:32.383Z,1513266452.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:32.732Z,1513266452.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:33.139Z,1513266453.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:33.532Z,1513266453.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:33.915Z,1513266453.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:34.308Z,1513266454.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:34.710Z,1513266454.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:35.113Z,1513266455.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:35.512Z,1513266455.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:35.910Z,1513266455.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:36.311Z,1513266456.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:36.742Z,1513266456.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:37.139Z,1513266457.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:37.537Z,1513266457.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:37.910Z,1513266457.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:38.315Z,1513266458.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:38.751Z,1513266458.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:39.123Z,1513266459.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:39.528Z,1513266459.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:39.912Z,1513266459.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:40.315Z,1513266460.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:40.721Z,1513266460.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:41.131Z,1513266461.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:41.522Z,1513266461.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:41.932Z,1513266461.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:42.315Z,1513266462.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:42.723Z,1513266462.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:43.126Z,1513266463.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:43.517Z,1513266463.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:43.909Z,1513266463.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:44.362Z,1513266464.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:44.763Z,1513266464.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:45.122Z,1513266465.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:45.532Z,1513266465.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:45.937Z,1513266465.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:46.309Z,1513266466.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:46.755Z,1513266466.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:47.120Z,1513266467.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:47.522Z,1513266467.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:47.918Z,1513266467.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:48.347Z,1513266468.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:48.715Z,1513266468.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:49.117Z,1513266469.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:49.523Z,1513266469.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:49.913Z,1513266469.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:50.308Z,1513266470.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:50.725Z,1513266470.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:51.119Z,1513266471.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:51.527Z,1513266471.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:51.919Z,1513266471.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:52.310Z,1513266472.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:52.720Z,1513266472.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:53.148Z,1513266473.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:53.522Z,1513266473.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:53.919Z,1513266473.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:54.313Z,1513266474.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:54.741Z,1513266474.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:54.746Z,1513266474.746 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:42:54.6Z
2017-12-14T15:47:54.746Z,1513266474.746 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:47:54.746Z,1513266474.746 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:47:55.143Z,1513266475.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:55.909Z,1513266475.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:56.090Z,1513266476.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:59.784Z,1513266479.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:47:59.885Z,1513266479.885 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0352.lzma
2017-12-14T15:47:59.958Z,1513266479.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:00.280Z,1513266480.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:00.628Z,1513266480.628 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0352.lzma.bak
2017-12-14T15:48:00.628Z,1513266480.628 [DataOverHttps](INFO): SBD MOMSN=5439081
2017-12-14T15:48:00.698Z,1513266480.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:02.119Z,1513266482.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:02.239Z,1513266482.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:05.625Z,1513266485.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:05.739Z,1513266485.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:06.220Z,1513266486.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:06.626Z,1513266486.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:06.939Z,1513266486.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:07.332Z,1513266487.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:10.743Z,1513266490.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:10.834Z,1513266490.834 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0353.lzma
2017-12-14T15:48:10.887Z,1513266490.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:11.307Z,1513266491.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:11.610Z,1513266491.610 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0353.lzma.bak
2017-12-14T15:48:11.610Z,1513266491.610 [DataOverHttps](INFO): SBD MOMSN=5439083
2017-12-14T15:48:11.710Z,1513266491.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:12.931Z,1513266492.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:12.934Z,1513266492.934 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:48:12.934Z,1513266492.934 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:48:12.935Z,1513266492.935 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:48:13.068Z,1513266493.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:16.523Z,1513266496.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:16.666Z,1513266496.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:17.075Z,1513266497.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:17.413Z,1513266497.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:17.937Z,1513266497.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:18.219Z,1513266498.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:18.618Z,1513266498.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:18.988Z,1513266498.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:19.393Z,1513266499.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:19.816Z,1513266499.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:20.239Z,1513266500.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:20.617Z,1513266500.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:21.022Z,1513266501.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:21.390Z,1513266501.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:21.791Z,1513266501.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:22.223Z,1513266502.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:22.598Z,1513266502.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:23.008Z,1513266503.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:23.480Z,1513266503.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:23.804Z,1513266503.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:24.199Z,1513266504.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:24.598Z,1513266504.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:25.003Z,1513266505.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:25.395Z,1513266505.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:25.804Z,1513266505.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:26.254Z,1513266506.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:26.630Z,1513266506.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:27.008Z,1513266507.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:27.407Z,1513266507.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:27.789Z,1513266507.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:28.191Z,1513266508.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:28.615Z,1513266508.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:29.016Z,1513266509.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:29.418Z,1513266509.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:29.871Z,1513266509.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:30.220Z,1513266510.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:30.596Z,1513266510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:30.999Z,1513266510.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:31.391Z,1513266511.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:31.824Z,1513266511.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:32.223Z,1513266512.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:32.625Z,1513266512.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:33.103Z,1513266513.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:33.399Z,1513266513.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:33.801Z,1513266513.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:34.227Z,1513266514.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:34.600Z,1513266514.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:35.064Z,1513266515.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:35.404Z,1513266515.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:35.804Z,1513266515.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:36.235Z,1513266516.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:36.603Z,1513266516.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:36.996Z,1513266516.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:37.403Z,1513266517.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:37.809Z,1513266517.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:38.208Z,1513266518.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:38.635Z,1513266518.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:38.000Z,1513266519.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:39.495Z,1513266519.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:39.795Z,1513266519.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:40.210Z,1513266520.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:40.598Z,1513266520.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:41.015Z,1513266521.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:41.408Z,1513266521.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:41.808Z,1513266521.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:42.279Z,1513266522.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:42.650Z,1513266522.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:42.999Z,1513266522.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:43.432Z,1513266523.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:43.810Z,1513266523.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:44.208Z,1513266524.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:44.606Z,1513266524.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:44.999Z,1513266524.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:45.401Z,1513266525.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:45.861Z,1513266525.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:46.200Z,1513266526.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:46.605Z,1513266526.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:47.011Z,1513266527.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:47.418Z,1513266527.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:47.808Z,1513266527.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:48.204Z,1513266528.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:48.626Z,1513266528.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:49.010Z,1513266529.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:49.392Z,1513266529.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:49.817Z,1513266529.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:50.210Z,1513266530.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:50.608Z,1513266530.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:50.998Z,1513266530.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:51.396Z,1513266531.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:51.797Z,1513266531.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:52.259Z,1513266532.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:52.611Z,1513266532.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:53.015Z,1513266533.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:53.427Z,1513266533.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:53.840Z,1513266533.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:54.211Z,1513266534.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:54.592Z,1513266534.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:54.993Z,1513266534.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:55.426Z,1513266535.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:55.845Z,1513266535.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:56.221Z,1513266536.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:56.642Z,1513266536.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:56.000Z,1513266537.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:57.426Z,1513266537.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:57.791Z,1513266537.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:58.192Z,1513266538.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:58.646Z,1513266538.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:59.032Z,1513266539.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:59.404Z,1513266539.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:48:59.807Z,1513266539.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:00.199Z,1513266540.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:00.610Z,1513266540.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:01.001Z,1513266541.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:01.395Z,1513266541.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:01.849Z,1513266541.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:02.203Z,1513266542.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:02.611Z,1513266542.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:02.000Z,1513266543.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:03.400Z,1513266543.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:03.805Z,1513266543.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:04.199Z,1513266544.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:04.602Z,1513266544.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:05.056Z,1513266545.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:05.415Z,1513266545.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:05.850Z,1513266545.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:06.204Z,1513266546.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:06.603Z,1513266546.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:06.999Z,1513266546.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:07.403Z,1513266547.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:07.818Z,1513266547.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:08.243Z,1513266548.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:08.615Z,1513266548.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:08.985Z,1513266548.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:09.409Z,1513266549.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:09.809Z,1513266549.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:10.214Z,1513266550.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:10.592Z,1513266550.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:11.016Z,1513266551.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:11.435Z,1513266551.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:11.828Z,1513266551.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:12.194Z,1513266552.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:12.596Z,1513266552.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:12.993Z,1513266552.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:13.396Z,1513266553.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:16.990Z,1513266556.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:17.127Z,1513266557.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:17.491Z,1513266557.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:17.922Z,1513266557.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:18.338Z,1513266558.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:18.690Z,1513266558.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:19.093Z,1513266559.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:19.527Z,1513266559.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:19.881Z,1513266559.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:20.295Z,1513266560.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:20.688Z,1513266560.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:21.135Z,1513266561.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:21.493Z,1513266561.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:21.887Z,1513266561.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:22.289Z,1513266562.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:22.689Z,1513266562.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:23.092Z,1513266563.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:23.484Z,1513266563.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:23.883Z,1513266563.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:23.896Z,1513266563.896 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:49:24.290Z,1513266564.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:24.688Z,1513266564.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:25.089Z,1513266565.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:25.488Z,1513266565.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:25.882Z,1513266565.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:26.287Z,1513266566.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:26.695Z,1513266566.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:27.088Z,1513266567.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:27.490Z,1513266567.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:27.880Z,1513266567.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:28.282Z,1513266568.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:28.724Z,1513266568.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:29.099Z,1513266569.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:29.492Z,1513266569.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:29.884Z,1513266569.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:30.291Z,1513266570.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:30.687Z,1513266570.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:31.091Z,1513266571.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:31.491Z,1513266571.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:31.882Z,1513266571.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:32.286Z,1513266572.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:32.695Z,1513266572.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:33.095Z,1513266573.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:33.498Z,1513266573.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:33.899Z,1513266573.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:34.276Z,1513266574.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:34.698Z,1513266574.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:35.081Z,1513266575.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:35.505Z,1513266575.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:35.887Z,1513266575.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:36.280Z,1513266576.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:36.727Z,1513266576.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:37.118Z,1513266577.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:37.118Z,1513266577.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 305
2017-12-14T15:49:37.118Z,1513266577.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:49:37.120Z,1513266577.120 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:37.120Z,1513266577.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 305
2017-12-14T15:49:37.120Z,1513266577.120 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:49:37.122Z,1513266577.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:37.122Z,1513266577.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 305
2017-12-14T15:49:37.122Z,1513266577.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:49:37.134Z,1513266577.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:49:37.134Z,1513266577.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:49:37.134Z,1513266577.134 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:49:37.520Z,1513266577.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:49:37.520Z,1513266577.520 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 305
2017-12-14T15:49:37.520Z,1513266577.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:49:37.520Z,1513266577.520 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 305
2017-12-14T15:49:37.525Z,1513266577.525 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:49:37.525Z,1513266577.525 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 305
2017-12-14T15:49:37.871Z,1513266577.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:49:37.872Z,1513266577.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:49:37.872Z,1513266577.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:49:37.872Z,1513266577.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:49:37.873Z,1513266577.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:49:37.873Z,1513266577.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:49:37.874Z,1513266577.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:49:37.874Z,1513266577.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:49:37.874Z,1513266577.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:49:38.283Z,1513266578.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:38.677Z,1513266578.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:39.109Z,1513266579.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:39.528Z,1513266579.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:39.915Z,1513266579.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:40.281Z,1513266580.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:40.735Z,1513266580.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:41.085Z,1513266581.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:41.487Z,1513266581.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:41.907Z,1513266581.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:42.275Z,1513266582.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:42.726Z,1513266582.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:43.142Z,1513266583.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:43.491Z,1513266583.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:43.877Z,1513266583.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:44.277Z,1513266584.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:44.686Z,1513266584.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:45.088Z,1513266585.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:45.496Z,1513266585.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:45.876Z,1513266585.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:46.316Z,1513266586.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:46.688Z,1513266586.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:47.092Z,1513266587.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:47.485Z,1513266587.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:47.876Z,1513266587.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:48.279Z,1513266588.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:48.688Z,1513266588.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:49.093Z,1513266589.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:49.536Z,1513266589.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:49.887Z,1513266589.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:50.289Z,1513266590.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:50.678Z,1513266590.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:51.107Z,1513266591.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:51.494Z,1513266591.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:51.888Z,1513266591.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:52.299Z,1513266592.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:52.766Z,1513266592.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:53.087Z,1513266593.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:53.496Z,1513266593.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:53.871Z,1513266593.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:54.272Z,1513266594.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:54.692Z,1513266594.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:55.101Z,1513266595.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:55.495Z,1513266595.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:55.916Z,1513266595.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:56.272Z,1513266596.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:56.698Z,1513266596.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:57.099Z,1513266597.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:57.501Z,1513266597.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:57.875Z,1513266597.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:58.298Z,1513266598.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:58.684Z,1513266598.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:59.149Z,1513266599.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:59.503Z,1513266599.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:49:59.879Z,1513266599.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:00.303Z,1513266600.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:00.678Z,1513266600.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:01.080Z,1513266601.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:01.477Z,1513266601.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:01.876Z,1513266601.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:02.371Z,1513266602.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:02.696Z,1513266602.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:03.147Z,1513266603.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:03.489Z,1513266603.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:03.911Z,1513266603.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:04.279Z,1513266604.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:04.727Z,1513266604.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:05.093Z,1513266605.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:05.537Z,1513266605.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:05.897Z,1513266605.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:06.291Z,1513266606.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:06.691Z,1513266606.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:07.103Z,1513266607.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:07.499Z,1513266607.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:07.889Z,1513266607.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:08.274Z,1513266608.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:08.724Z,1513266608.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:09.103Z,1513266609.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:09.500Z,1513266609.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:09.877Z,1513266609.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:10.276Z,1513266610.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:10.692Z,1513266610.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:11.084Z,1513266611.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:11.477Z,1513266611.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:11.964Z,1513266611.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:12.274Z,1513266612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:12.678Z,1513266612.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:13.105Z,1513266613.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:13.482Z,1513266613.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:17.013Z,1513266617.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:17.156Z,1513266617.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:17.511Z,1513266617.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:17.911Z,1513266617.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:18.284Z,1513266618.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:18.691Z,1513266618.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:19.095Z,1513266619.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:19.487Z,1513266619.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:19.887Z,1513266619.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:20.292Z,1513266620.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:20.691Z,1513266620.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:21.085Z,1513266621.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:21.529Z,1513266621.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:21.887Z,1513266621.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:22.285Z,1513266622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:22.688Z,1513266622.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:23.088Z,1513266623.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:23.495Z,1513266623.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:23.933Z,1513266623.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:24.283Z,1513266624.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:24.775Z,1513266624.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:25.103Z,1513266625.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:25.544Z,1513266625.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:25.888Z,1513266625.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:26.319Z,1513266626.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:26.702Z,1513266626.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:27.120Z,1513266627.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:27.495Z,1513266627.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:27.935Z,1513266627.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:28.285Z,1513266628.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:28.703Z,1513266628.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:29.099Z,1513266629.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:29.498Z,1513266629.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:29.888Z,1513266629.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:30.291Z,1513266630.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:30.693Z,1513266630.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:31.103Z,1513266631.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:31.493Z,1513266631.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:31.883Z,1513266631.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:32.293Z,1513266632.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:32.698Z,1513266632.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:33.107Z,1513266633.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:33.507Z,1513266633.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:33.895Z,1513266633.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:34.340Z,1513266634.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:34.697Z,1513266634.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:35.096Z,1513266635.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:35.531Z,1513266635.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:35.888Z,1513266635.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:36.291Z,1513266636.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:36.703Z,1513266636.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:37.097Z,1513266637.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:37.496Z,1513266637.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:37.888Z,1513266637.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:38.283Z,1513266638.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:38.691Z,1513266638.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:39.096Z,1513266639.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:39.501Z,1513266639.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:39.889Z,1513266639.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:40.294Z,1513266640.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:40.739Z,1513266640.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:41.097Z,1513266641.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:41.493Z,1513266641.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:41.892Z,1513266641.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:42.274Z,1513266642.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:42.703Z,1513266642.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:43.107Z,1513266643.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:43.500Z,1513266643.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:43.946Z,1513266643.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:44.305Z,1513266644.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:44.719Z,1513266644.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:45.111Z,1513266645.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:45.512Z,1513266645.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:45.882Z,1513266645.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:46.286Z,1513266646.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:46.712Z,1513266646.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:47.115Z,1513266647.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:47.531Z,1513266647.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:47.887Z,1513266647.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:48.289Z,1513266648.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:48.722Z,1513266648.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:49.099Z,1513266649.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:49.504Z,1513266649.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:49.887Z,1513266649.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:50.317Z,1513266650.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:50.694Z,1513266650.694 [BPC1](ERROR): Failed to receive battery data
2017-12-14T15:50:50.694Z,1513266650.694 [BPC1] Communications Fault, FailCount= 1
2017-12-14T15:50:50.694Z,1513266650.694 [BPC1](ERROR): Communications Fault
2017-12-14T15:50:50.703Z,1513266650.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:50.716Z,1513266650.716 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T15:50:51.103Z,1513266651.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:51.502Z,1513266651.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:51.881Z,1513266651.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:51.914Z,1513266651.914 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T15:50:51.914Z,1513266651.914 [BPC1] No Fault, FailCount= 1
2017-12-14T15:50:52.331Z,1513266652.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:52.705Z,1513266652.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:53.109Z,1513266653.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:53.489Z,1513266653.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:53.884Z,1513266653.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:54.280Z,1513266654.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:54.689Z,1513266654.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:55.112Z,1513266655.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:55.488Z,1513266655.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:55.882Z,1513266655.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:56.282Z,1513266656.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:56.716Z,1513266656.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:57.095Z,1513266657.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:57.488Z,1513266657.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:57.887Z,1513266657.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:58.287Z,1513266658.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:58.688Z,1513266658.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:59.092Z,1513266659.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:59.495Z,1513266659.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:50:59.932Z,1513266659.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:00.283Z,1513266660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:00.730Z,1513266660.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:01.092Z,1513266661.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:01.491Z,1513266661.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:01.883Z,1513266661.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:02.295Z,1513266662.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:02.700Z,1513266662.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:03.123Z,1513266663.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:03.496Z,1513266663.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:03.887Z,1513266663.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:04.292Z,1513266664.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:04.701Z,1513266664.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:05.099Z,1513266665.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:05.490Z,1513266665.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:05.885Z,1513266665.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:06.322Z,1513266666.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:06.699Z,1513266666.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:07.092Z,1513266667.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:07.492Z,1513266667.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:07.886Z,1513266667.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:08.291Z,1513266668.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:08.693Z,1513266668.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:09.099Z,1513266669.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:09.533Z,1513266669.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:09.884Z,1513266669.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:10.287Z,1513266670.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:10.692Z,1513266670.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:11.092Z,1513266671.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:11.499Z,1513266671.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:11.890Z,1513266671.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:12.284Z,1513266672.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:12.755Z,1513266672.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:13.104Z,1513266673.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:13.504Z,1513266673.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:17.508Z,1513266677.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:17.674Z,1513266677.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:18.027Z,1513266678.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:18.503Z,1513266678.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:18.803Z,1513266678.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:19.215Z,1513266679.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:19.628Z,1513266679.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:19.995Z,1513266679.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:20.420Z,1513266680.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:20.814Z,1513266680.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:21.208Z,1513266681.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:21.654Z,1513266681.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:22.096Z,1513266682.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:22.402Z,1513266682.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:22.807Z,1513266682.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:23.234Z,1513266683.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:23.595Z,1513266683.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:24.098Z,1513266684.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:24.418Z,1513266684.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:24.807Z,1513266684.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:25.209Z,1513266685.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:25.617Z,1513266685.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:25.987Z,1513266685.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:26.438Z,1513266686.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:26.803Z,1513266686.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:27.210Z,1513266687.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:27.616Z,1513266687.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:27.670Z,1513266687.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:28.024Z,1513266688.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:28.389Z,1513266688.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:28.466Z,1513266688.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:28.821Z,1513266688.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:28.870Z,1513266688.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:29.239Z,1513266689.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:29.603Z,1513266689.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:29.667Z,1513266689.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:30.037Z,1513266690.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:30.462Z,1513266690.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:30.475Z,1513266690.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:30.823Z,1513266690.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:30.869Z,1513266690.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:31.230Z,1513266691.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:31.636Z,1513266691.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:31.665Z,1513266691.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:31.994Z,1513266691.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:32.461Z,1513266692.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:32.546Z,1513266692.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:32.835Z,1513266692.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:32.870Z,1513266692.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:51:33.227Z,1513266693.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:33.627Z,1513266693.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:34.015Z,1513266694.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:34.396Z,1513266694.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:34.825Z,1513266694.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:35.228Z,1513266695.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:35.645Z,1513266695.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:36.007Z,1513266696.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:36.419Z,1513266696.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:36.819Z,1513266696.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:37.226Z,1513266697.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:37.621Z,1513266697.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:38.003Z,1513266698.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:38.461Z,1513266698.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:38.855Z,1513266698.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:39.219Z,1513266699.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:39.619Z,1513266699.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:40.112Z,1513266700.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:40.396Z,1513266700.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:40.831Z,1513266700.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:41.195Z,1513266701.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:41.603Z,1513266701.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:42.016Z,1513266702.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:42.437Z,1513266702.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:42.816Z,1513266702.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:43.236Z,1513266703.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:43.612Z,1513266703.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:43.995Z,1513266703.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:44.524Z,1513266704.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:44.847Z,1513266704.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:45.211Z,1513266705.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:45.663Z,1513266705.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:46.013Z,1513266706.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:46.500Z,1513266706.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:46.877Z,1513266706.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:47.215Z,1513266707.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:47.615Z,1513266707.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:48.010Z,1513266708.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:48.395Z,1513266708.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:48.796Z,1513266708.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:49.222Z,1513266709.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:49.602Z,1513266709.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:49.988Z,1513266709.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:50.402Z,1513266710.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:50.802Z,1513266710.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:51.204Z,1513266711.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:51.600Z,1513266711.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:51.988Z,1513266711.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:52.423Z,1513266712.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:52.792Z,1513266712.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:53.189Z,1513266713.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:53.592Z,1513266713.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:54.007Z,1513266714.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:54.409Z,1513266714.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:54.809Z,1513266714.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:55.184Z,1513266715.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:55.580Z,1513266715.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:56.028Z,1513266716.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:56.389Z,1513266716.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:56.796Z,1513266716.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:57.196Z,1513266717.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:57.599Z,1513266717.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:57.986Z,1513266717.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:58.477Z,1513266718.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:58.794Z,1513266718.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:59.211Z,1513266719.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:51:59.607Z,1513266719.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:00.011Z,1513266720.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:00.463Z,1513266720.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:00.807Z,1513266720.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:01.238Z,1513266721.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:01.619Z,1513266721.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:02.013Z,1513266722.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:02.427Z,1513266722.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:02.792Z,1513266722.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:03.227Z,1513266723.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:03.592Z,1513266723.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:03.000Z,1513266724.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:04.395Z,1513266724.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:04.787Z,1513266724.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:05.178Z,1513266725.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:05.601Z,1513266725.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:05.999Z,1513266725.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:06.417Z,1513266726.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:06.815Z,1513266726.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:07.189Z,1513266727.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:07.591Z,1513266727.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:07.989Z,1513266727.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:08.433Z,1513266728.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:08.801Z,1513266728.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:09.200Z,1513266729.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:09.608Z,1513266729.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:09.988Z,1513266729.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:10.399Z,1513266730.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:10.795Z,1513266730.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:11.191Z,1513266731.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:11.647Z,1513266731.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:12.060Z,1513266732.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:12.480Z,1513266732.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:12.875Z,1513266732.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:13.191Z,1513266733.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:13.587Z,1513266733.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:17.219Z,1513266737.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:17.447Z,1513266737.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:17.747Z,1513266737.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:18.191Z,1513266738.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:18.541Z,1513266738.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:18.936Z,1513266738.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:19.329Z,1513266739.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:19.735Z,1513266739.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:20.150Z,1513266740.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:20.535Z,1513266740.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:20.942Z,1513266740.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:21.372Z,1513266741.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:21.743Z,1513266741.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:22.151Z,1513266742.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:22.534Z,1513266742.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:22.935Z,1513266742.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:23.328Z,1513266743.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:23.800Z,1513266743.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:24.202Z,1513266744.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:24.584Z,1513266744.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:24.940Z,1513266744.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:25.356Z,1513266745.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:25.738Z,1513266745.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:26.143Z,1513266746.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:26.539Z,1513266746.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:26.940Z,1513266746.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:27.354Z,1513266747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:27.788Z,1513266747.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:28.143Z,1513266748.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:28.543Z,1513266748.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:28.920Z,1513266748.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:29.324Z,1513266749.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:29.755Z,1513266749.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:30.148Z,1513266750.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:30.805Z,1513266750.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:30.964Z,1513266750.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:31.335Z,1513266751.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:31.746Z,1513266751.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:32.150Z,1513266752.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:32.543Z,1513266752.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:32.949Z,1513266752.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:33.386Z,1513266753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:33.747Z,1513266753.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:34.244Z,1513266754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:34.523Z,1513266754.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:34.947Z,1513266754.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:35.322Z,1513266755.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:35.752Z,1513266755.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:36.163Z,1513266756.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:36.559Z,1513266756.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:36.925Z,1513266756.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:37.357Z,1513266757.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:37.735Z,1513266757.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:38.212Z,1513266758.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:38.212Z,1513266758.212 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 306
2017-12-14T15:52:38.212Z,1513266758.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:52:38.214Z,1513266758.214 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:38.214Z,1513266758.214 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 306
2017-12-14T15:52:38.214Z,1513266758.214 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:52:38.216Z,1513266758.216 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:38.216Z,1513266758.216 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 306
2017-12-14T15:52:38.216Z,1513266758.216 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:52:38.252Z,1513266758.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:52:38.265Z,1513266758.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:52:38.265Z,1513266758.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:52:38.548Z,1513266758.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:52:38.548Z,1513266758.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 306
2017-12-14T15:52:38.548Z,1513266758.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:52:38.548Z,1513266758.548 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 306
2017-12-14T15:52:38.549Z,1513266758.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:52:38.549Z,1513266758.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 306
2017-12-14T15:52:38.946Z,1513266758.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:52:38.946Z,1513266758.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:52:38.947Z,1513266758.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:52:38.947Z,1513266758.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:52:38.947Z,1513266758.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:52:38.948Z,1513266758.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:52:38.948Z,1513266758.948 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:52:38.948Z,1513266758.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:52:38.949Z,1513266758.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:52:39.347Z,1513266759.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:39.736Z,1513266759.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:40.128Z,1513266760.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:40.584Z,1513266760.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:40.935Z,1513266760.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:41.344Z,1513266761.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:41.626Z,1513266761.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:41.738Z,1513266761.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:42.142Z,1513266762.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:42.423Z,1513266762.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:42.595Z,1513266762.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:42.831Z,1513266762.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:42.935Z,1513266762.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:43.336Z,1513266763.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:43.626Z,1513266763.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:43.783Z,1513266763.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:44.147Z,1513266764.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:44.421Z,1513266764.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:44.531Z,1513266764.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:44.825Z,1513266764.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:44.955Z,1513266764.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:45.386Z,1513266765.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:45.791Z,1513266765.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:46.151Z,1513266766.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:46.563Z,1513266766.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:46.971Z,1513266766.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:47.359Z,1513266767.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:47.747Z,1513266767.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:48.163Z,1513266768.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:48.559Z,1513266768.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:48.923Z,1513266768.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:49.322Z,1513266769.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:49.725Z,1513266769.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:50.215Z,1513266770.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:50.552Z,1513266770.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:50.956Z,1513266770.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:51.353Z,1513266771.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:51.736Z,1513266771.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:52.186Z,1513266772.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:52.535Z,1513266772.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:52.932Z,1513266772.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:53.368Z,1513266773.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:53.743Z,1513266773.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:54.248Z,1513266774.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:54.551Z,1513266774.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:54.939Z,1513266774.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:55.338Z,1513266775.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:55.613Z,1513266775.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:55.748Z,1513266775.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:56.137Z,1513266776.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:56.412Z,1513266776.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:56.572Z,1513266776.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:56.833Z,1513266776.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:56.952Z,1513266776.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:57.348Z,1513266777.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:57.630Z,1513266777.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:57.749Z,1513266777.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:58.159Z,1513266778.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:58.428Z,1513266778.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:58.541Z,1513266778.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:58.835Z,1513266778.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T15:52:58.944Z,1513266778.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:59.348Z,1513266779.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:52:59.799Z,1513266779.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:00.161Z,1513266780.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:00.554Z,1513266780.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:00.950Z,1513266780.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:01.327Z,1513266781.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:01.727Z,1513266781.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:02.166Z,1513266782.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:02.527Z,1513266782.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:02.983Z,1513266782.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:03.347Z,1513266783.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:03.733Z,1513266783.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:04.178Z,1513266784.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:04.532Z,1513266784.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:04.932Z,1513266784.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:05.330Z,1513266785.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:05.735Z,1513266785.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:06.240Z,1513266786.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:06.571Z,1513266786.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:06.932Z,1513266786.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:07.334Z,1513266787.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:07.782Z,1513266787.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:08.186Z,1513266788.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:08.564Z,1513266788.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:08.944Z,1513266788.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:09.399Z,1513266789.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:09.755Z,1513266789.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:10.152Z,1513266790.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:10.544Z,1513266790.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:10.937Z,1513266790.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:11.331Z,1513266791.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:11.751Z,1513266791.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:12.153Z,1513266792.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:12.596Z,1513266792.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:12.925Z,1513266792.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:13.324Z,1513266793.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:13.327Z,1513266793.327 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T15:53:13.327Z,1513266793.327 [Default:CheckIn:C.Wait] Stopped
2017-12-14T15:53:13.327Z,1513266793.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T15:53:13.327Z,1513266793.327 [Default:CheckIn:D] Running Loop=1
2017-12-14T15:53:13.727Z,1513266793.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:13.730Z,1513266793.730 [Default:CheckIn:D] Stopped
2017-12-14T15:53:13.730Z,1513266793.730 [Default:CheckIn:E] Running Loop=1
2017-12-14T15:53:17.334Z,1513266797.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:17.354Z,1513266797.354 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 919.972331 min 
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn:E] Stopped
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn] Stopped
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn](INFO): Running loop #89
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn] Running Loop=89
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T15:53:17.355Z,1513266797.355 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T15:53:17.491Z,1513266797.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:17.840Z,1513266797.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:18.274Z,1513266798.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:18.647Z,1513266798.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:19.045Z,1513266799.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:19.438Z,1513266799.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:19.839Z,1513266799.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:20.230Z,1513266800.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:20.632Z,1513266800.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:21.045Z,1513266801.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:21.443Z,1513266801.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:21.845Z,1513266801.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:22.239Z,1513266802.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:22.640Z,1513266802.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:23.035Z,1513266803.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:23.475Z,1513266803.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:23.844Z,1513266803.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:24.245Z,1513266804.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:24.640Z,1513266804.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:25.030Z,1513266805.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:25.431Z,1513266805.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:25.832Z,1513266805.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:26.239Z,1513266806.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:26.641Z,1513266806.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:27.051Z,1513266807.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:27.451Z,1513266807.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:27.844Z,1513266807.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:28.231Z,1513266808.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:28.633Z,1513266808.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:29.035Z,1513266809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:29.439Z,1513266809.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:29.841Z,1513266809.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:30.291Z,1513266810.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:30.645Z,1513266810.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:31.082Z,1513266811.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:31.488Z,1513266811.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:31.855Z,1513266811.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:32.240Z,1513266812.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:32.643Z,1513266812.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:33.044Z,1513266813.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:33.444Z,1513266813.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:33.851Z,1513266813.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:34.243Z,1513266814.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:34.688Z,1513266814.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:35.032Z,1513266815.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:35.439Z,1513266815.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:35.844Z,1513266815.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:36.244Z,1513266816.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:36.636Z,1513266816.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:37.034Z,1513266817.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:37.434Z,1513266817.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:37.866Z,1513266817.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:38.236Z,1513266818.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:38.632Z,1513266818.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:39.047Z,1513266819.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:39.439Z,1513266819.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:39.847Z,1513266819.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:40.270Z,1513266820.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:40.638Z,1513266820.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:41.083Z,1513266821.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:41.436Z,1513266821.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:41.844Z,1513266821.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:42.245Z,1513266822.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:42.645Z,1513266822.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:43.039Z,1513266823.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:43.437Z,1513266823.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:43.836Z,1513266823.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:44.294Z,1513266824.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:44.627Z,1513266824.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:45.051Z,1513266825.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:45.451Z,1513266825.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:45.853Z,1513266825.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:46.236Z,1513266826.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:46.634Z,1513266826.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:47.032Z,1513266827.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:47.471Z,1513266827.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:47.840Z,1513266827.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:48.236Z,1513266828.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:48.686Z,1513266828.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:49.033Z,1513266829.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:49.435Z,1513266829.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:49.840Z,1513266829.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:50.236Z,1513266830.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:50.692Z,1513266830.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:51.090Z,1513266831.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:51.442Z,1513266831.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:51.843Z,1513266831.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:52.239Z,1513266832.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:52.664Z,1513266832.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:53.038Z,1513266833.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:53.478Z,1513266833.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:53.878Z,1513266833.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:54.274Z,1513266834.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:54.637Z,1513266834.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:55.033Z,1513266835.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:55.435Z,1513266835.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:55.832Z,1513266835.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:56.236Z,1513266836.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:56.632Z,1513266836.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:57.070Z,1513266837.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:57.443Z,1513266837.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:57.837Z,1513266837.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:58.231Z,1513266838.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:58.635Z,1513266838.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:59.032Z,1513266839.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:59.434Z,1513266839.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:53:59.835Z,1513266839.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:00.260Z,1513266840.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:00.644Z,1513266840.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:01.039Z,1513266841.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:01.435Z,1513266841.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:01.834Z,1513266841.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:02.235Z,1513266842.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:02.671Z,1513266842.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:03.042Z,1513266843.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:03.491Z,1513266843.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:03.849Z,1513266843.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:04.234Z,1513266844.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:04.633Z,1513266844.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:05.035Z,1513266845.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:05.439Z,1513266845.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:05.845Z,1513266845.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:06.246Z,1513266846.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:06.699Z,1513266846.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:07.051Z,1513266847.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:07.434Z,1513266847.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:07.831Z,1513266847.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:08.243Z,1513266848.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:08.636Z,1513266848.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:09.051Z,1513266849.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:09.455Z,1513266849.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:09.884Z,1513266849.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:10.244Z,1513266850.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:10.647Z,1513266850.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:11.024Z,1513266851.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:11.427Z,1513266851.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:11.859Z,1513266851.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:12.260Z,1513266852.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:12.663Z,1513266852.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:13.116Z,1513266853.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:13.430Z,1513266853.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:13.841Z,1513266853.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:17.292Z,1513266857.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:17.434Z,1513266857.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:17.803Z,1513266857.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:18.201Z,1513266858.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:18.600Z,1513266858.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:19.027Z,1513266859.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:19.387Z,1513266859.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:19.826Z,1513266859.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:20.193Z,1513266860.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:20.591Z,1513266860.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:21.004Z,1513266861.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:21.411Z,1513266861.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:21.801Z,1513266861.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:22.193Z,1513266862.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:22.624Z,1513266862.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:23.000Z,1513266863.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:23.398Z,1513266863.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:23.811Z,1513266863.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:24.203Z,1513266864.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:24.612Z,1513266864.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:24.996Z,1513266864.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:25.400Z,1513266865.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:25.847Z,1513266865.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:26.201Z,1513266866.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:26.590Z,1513266866.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:27.001Z,1513266867.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:27.407Z,1513266867.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:27.795Z,1513266867.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:28.226Z,1513266868.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:28.587Z,1513266868.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:29.075Z,1513266869.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:29.387Z,1513266869.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:29.789Z,1513266869.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:30.200Z,1513266870.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:30.617Z,1513266870.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:30.990Z,1513266870.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:31.386Z,1513266871.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:31.790Z,1513266871.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:32.238Z,1513266872.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:32.589Z,1513266872.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:32.996Z,1513266872.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:33.396Z,1513266873.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:33.796Z,1513266873.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:34.234Z,1513266874.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:34.587Z,1513266874.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:34.990Z,1513266874.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:35.439Z,1513266875.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:35.797Z,1513266875.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:36.205Z,1513266876.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:36.600Z,1513266876.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:36.998Z,1513266876.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:37.392Z,1513266877.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:37.795Z,1513266877.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:38.192Z,1513266878.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:38.647Z,1513266878.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:38.946Z,1513266878.946 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T15:54:38.946Z,1513266878.946 [NAL9602] Data Fault, FailCount= 4
2017-12-14T15:54:38.946Z,1513266878.946 [NAL9602](ERROR): Data Fault
2017-12-14T15:54:39.008Z,1513266879.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:39.022Z,1513266879.022 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T15:54:39.350Z,1513266879.350 [NAL9602](INFO): Powering down
2017-12-14T15:54:39.403Z,1513266879.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:39.800Z,1513266879.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:40.258Z,1513266880.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:40.274Z,1513266880.274 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T15:54:40.275Z,1513266880.275 [NAL9602] No Fault, FailCount= 4
2017-12-14T15:54:40.599Z,1513266880.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:40.998Z,1513266880.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:41.415Z,1513266881.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:41.837Z,1513266881.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:42.211Z,1513266882.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:42.598Z,1513266882.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:42.000Z,1513266883.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:43.375Z,1513266883.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:43.798Z,1513266883.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:44.213Z,1513266884.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:44.603Z,1513266884.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:45.060Z,1513266885.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:45.387Z,1513266885.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:45.877Z,1513266885.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:46.179Z,1513266886.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:46.607Z,1513266886.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:46.982Z,1513266886.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:47.378Z,1513266887.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:47.784Z,1513266887.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:48.268Z,1513266888.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:48.606Z,1513266888.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:48.988Z,1513266888.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:49.386Z,1513266889.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:49.778Z,1513266889.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:50.180Z,1513266890.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:50.623Z,1513266890.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:50.988Z,1513266890.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:51.459Z,1513266891.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:51.795Z,1513266891.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:52.187Z,1513266892.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:52.594Z,1513266892.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:52.995Z,1513266892.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:53.391Z,1513266893.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:53.788Z,1513266893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:54.190Z,1513266894.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:54.638Z,1513266894.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:54.993Z,1513266894.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:55.393Z,1513266895.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:55.791Z,1513266895.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:56.198Z,1513266896.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:56.603Z,1513266896.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:56.982Z,1513266896.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:57.385Z,1513266897.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:57.857Z,1513266897.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:58.211Z,1513266898.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:58.588Z,1513266898.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:58.983Z,1513266898.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:59.382Z,1513266899.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:54:59.781Z,1513266899.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:00.186Z,1513266900.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:00.588Z,1513266900.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:01.083Z,1513266901.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:01.395Z,1513266901.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:01.789Z,1513266901.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:02.190Z,1513266902.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:02.588Z,1513266902.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:03.039Z,1513266903.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:03.387Z,1513266903.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:03.831Z,1513266903.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:04.246Z,1513266904.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:04.614Z,1513266904.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:05.002Z,1513266905.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:05.393Z,1513266905.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:05.790Z,1513266905.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:06.187Z,1513266906.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:06.603Z,1513266906.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:06.993Z,1513266906.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:07.444Z,1513266907.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:07.799Z,1513266907.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:08.194Z,1513266908.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:08.594Z,1513266908.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:08.993Z,1513266908.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:09.400Z,1513266909.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:09.744Z,1513266909.744 [NAL9602](INFO): Powering up NAL9602
2017-12-14T15:55:09.776Z,1513266909.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:10.178Z,1513266910.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:10.617Z,1513266910.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:10.995Z,1513266910.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:11.386Z,1513266911.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:11.789Z,1513266911.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:12.203Z,1513266912.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:12.592Z,1513266912.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:13.020Z,1513266913.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:13.383Z,1513266913.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:13.841Z,1513266913.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:14.195Z,1513266914.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:17.592Z,1513266917.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:17.703Z,1513266917.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:18.105Z,1513266918.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:18.491Z,1513266918.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:18.882Z,1513266918.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:19.267Z,1513266919.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:19.687Z,1513266919.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:20.135Z,1513266920.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:20.497Z,1513266920.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:20.826Z,1513266920.826 [NAL9602](INFO): NAL9602 initialized
2017-12-14T15:55:20.883Z,1513266920.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:21.275Z,1513266921.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:21.695Z,1513266921.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:22.143Z,1513266922.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:22.485Z,1513266922.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:22.875Z,1513266922.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:23.283Z,1513266923.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:23.683Z,1513266923.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:24.164Z,1513266924.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:24.515Z,1513266924.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:24.915Z,1513266924.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:25.270Z,1513266925.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:25.692Z,1513266925.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:26.144Z,1513266926.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:26.501Z,1513266926.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:26.903Z,1513266926.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:27.282Z,1513266927.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:27.690Z,1513266927.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:28.089Z,1513266928.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:28.523Z,1513266928.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:28.870Z,1513266928.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:29.273Z,1513266929.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:29.721Z,1513266929.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:30.085Z,1513266930.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:30.504Z,1513266930.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:30.891Z,1513266930.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:31.287Z,1513266931.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:31.679Z,1513266931.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:32.145Z,1513266932.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:32.468Z,1513266932.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:32.916Z,1513266932.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:33.272Z,1513266933.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:33.695Z,1513266933.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:34.119Z,1513266934.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:34.498Z,1513266934.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:34.866Z,1513266934.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x34047 got:0x38546
2017-12-14T15:55:34.883Z,1513266934.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:35.311Z,1513266935.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:35.668Z,1513266935.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:36.172Z,1513266936.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:36.496Z,1513266936.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:36.887Z,1513266936.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:37.275Z,1513266937.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:37.691Z,1513266937.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:38.128Z,1513266938.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:38.484Z,1513266938.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:38.872Z,1513266938.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:39.295Z,1513266939.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:39.295Z,1513266939.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 307
2017-12-14T15:55:39.295Z,1513266939.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:55:39.313Z,1513266939.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:39.313Z,1513266939.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 307
2017-12-14T15:55:39.313Z,1513266939.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:55:39.315Z,1513266939.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:39.315Z,1513266939.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 307
2017-12-14T15:55:39.316Z,1513266939.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:55:39.364Z,1513266939.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:55:39.364Z,1513266939.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:55:39.377Z,1513266939.377 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:55:39.677Z,1513266939.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x58528 got:0x438
2017-12-14T15:55:39.720Z,1513266939.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:55:39.720Z,1513266939.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 307
2017-12-14T15:55:39.721Z,1513266939.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:55:39.721Z,1513266939.721 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 307
2017-12-14T15:55:39.721Z,1513266939.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:55:39.721Z,1513266939.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 307
2017-12-14T15:55:40.149Z,1513266940.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:55:40.150Z,1513266940.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:55:40.150Z,1513266940.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:55:40.150Z,1513266940.150 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:55:40.151Z,1513266940.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:55:40.151Z,1513266940.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:55:40.151Z,1513266940.151 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:55:40.152Z,1513266940.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:55:40.152Z,1513266940.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:55:40.475Z,1513266940.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:40.886Z,1513266940.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:41.271Z,1513266941.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:41.669Z,1513266941.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:42.094Z,1513266942.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:42.510Z,1513266942.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:42.891Z,1513266942.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:43.271Z,1513266943.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:43.671Z,1513266943.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:44.079Z,1513266944.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:44.492Z,1513266944.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:44.874Z,1513266944.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:45.276Z,1513266945.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:45.720Z,1513266945.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:46.167Z,1513266946.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:46.480Z,1513266946.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:46.887Z,1513266946.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:47.307Z,1513266947.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:47.684Z,1513266947.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:48.140Z,1513266948.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:48.525Z,1513266948.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:48.904Z,1513266948.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:49.303Z,1513266949.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:49.667Z,1513266949.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:50.120Z,1513266950.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:50.480Z,1513266950.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:50.896Z,1513266950.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:51.284Z,1513266951.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:51.682Z,1513266951.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:52.124Z,1513266952.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:52.471Z,1513266952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:52.873Z,1513266952.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:53.270Z,1513266953.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:53.683Z,1513266953.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:54.072Z,1513266954.072 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T15:55:54.158Z,1513266954.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:54.484Z,1513266954.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:54.885Z,1513266954.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:55.300Z,1513266955.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:55.674Z,1513266955.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:56.077Z,1513266956.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:56.515Z,1513266956.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:56.886Z,1513266956.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:57.280Z,1513266957.280 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T15:55:57.310Z,1513266957.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:57.710Z,1513266957.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:58.087Z,1513266958.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:58.560Z,1513266958.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:58.876Z,1513266958.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:59.273Z,1513266959.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:55:59.678Z,1513266959.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:00.147Z,1513266960.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:00.486Z,1513266960.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:00.891Z,1513266960.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:01.285Z,1513266961.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:01.718Z,1513266961.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:02.149Z,1513266962.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:02.474Z,1513266962.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:02.875Z,1513266962.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:03.299Z,1513266963.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:03.669Z,1513266963.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x13339 got:0x46595
2017-12-14T15:56:03.698Z,1513266963.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:04.136Z,1513266964.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:04.485Z,1513266964.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:04.900Z,1513266964.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:05.284Z,1513266965.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:05.686Z,1513266965.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:06.136Z,1513266966.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:06.500Z,1513266966.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:06.881Z,1513266966.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:07.276Z,1513266967.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:07.679Z,1513266967.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:08.180Z,1513266968.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:08.494Z,1513266968.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:08.880Z,1513266968.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:09.282Z,1513266969.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:09.770Z,1513266969.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:10.078Z,1513266970.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:10.528Z,1513266970.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:10.883Z,1513266970.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:11.299Z,1513266971.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:11.670Z,1513266971.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:12.074Z,1513266972.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:12.554Z,1513266972.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:12.880Z,1513266972.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:13.272Z,1513266973.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:13.675Z,1513266973.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:14.145Z,1513266974.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:14.522Z,1513266974.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:18.547Z,1513266978.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:18.726Z,1513266978.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:19.088Z,1513266979.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:19.511Z,1513266979.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:19.885Z,1513266979.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:20.282Z,1513266980.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:20.699Z,1513266980.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:21.093Z,1513266981.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:21.505Z,1513266981.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:21.903Z,1513266981.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:22.287Z,1513266982.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:22.717Z,1513266982.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:23.100Z,1513266983.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:23.475Z,1513266983.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:23.903Z,1513266983.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:24.302Z,1513266984.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:24.727Z,1513266984.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:25.090Z,1513266985.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:25.501Z,1513266985.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:25.858Z,1513266985.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:26.304Z,1513266986.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:26.700Z,1513266986.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:27.112Z,1513266987.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:27.486Z,1513266987.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:27.907Z,1513266987.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:28.274Z,1513266988.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:28.672Z,1513266988.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:29.059Z,1513266989.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:29.487Z,1513266989.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:29.935Z,1513266989.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:30.284Z,1513266990.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:30.687Z,1513266990.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:31.095Z,1513266991.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:31.563Z,1513266991.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:31.890Z,1513266991.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:32.311Z,1513266992.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:32.673Z,1513266992.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:33.107Z,1513266993.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:33.498Z,1513266993.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:33.895Z,1513266993.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:34.282Z,1513266994.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:34.704Z,1513266994.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:35.086Z,1513266995.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:35.507Z,1513266995.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:35.891Z,1513266995.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:36.281Z,1513266996.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:36.684Z,1513266996.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:37.095Z,1513266997.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:37.485Z,1513266997.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:37.884Z,1513266997.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:38.286Z,1513266998.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:38.690Z,1513266998.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:39.091Z,1513266999.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:39.514Z,1513266999.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:39.892Z,1513266999.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:40.268Z,1513267000.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:40.718Z,1513267000.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:41.115Z,1513267001.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:41.507Z,1513267001.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:41.893Z,1513267001.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:42.287Z,1513267002.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:42.705Z,1513267002.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:43.075Z,1513267003.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:43.475Z,1513267003.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:43.880Z,1513267003.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:44.288Z,1513267004.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:44.686Z,1513267004.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:45.084Z,1513267005.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:45.510Z,1513267005.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:45.892Z,1513267005.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:46.292Z,1513267006.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:46.696Z,1513267006.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:47.095Z,1513267007.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:47.471Z,1513267007.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:47.905Z,1513267007.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:48.315Z,1513267008.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:48.724Z,1513267008.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:49.083Z,1513267009.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:49.472Z,1513267009.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:49.867Z,1513267009.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:50.287Z,1513267010.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:50.676Z,1513267010.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:51.079Z,1513267011.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:51.489Z,1513267011.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:51.883Z,1513267011.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:52.269Z,1513267012.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:52.671Z,1513267012.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:53.072Z,1513267013.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:53.464Z,1513267013.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:53.974Z,1513267013.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:54.287Z,1513267014.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:54.711Z,1513267014.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:55.084Z,1513267015.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:55.503Z,1513267015.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:55.857Z,1513267015.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:56.273Z,1513267016.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:56.667Z,1513267016.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:57.116Z,1513267017.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:57.483Z,1513267017.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:57.878Z,1513267017.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:58.270Z,1513267018.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:58.669Z,1513267018.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:59.079Z,1513267019.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:59.471Z,1513267019.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:56:59.865Z,1513267019.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:00.313Z,1513267020.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:00.683Z,1513267020.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:01.087Z,1513267021.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:01.479Z,1513267021.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:01.879Z,1513267021.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:02.277Z,1513267022.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:02.659Z,1513267022.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:03.080Z,1513267023.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:03.539Z,1513267023.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:03.885Z,1513267023.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:04.272Z,1513267024.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:04.664Z,1513267024.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:05.065Z,1513267025.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:05.464Z,1513267025.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:05.871Z,1513267025.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:06.279Z,1513267026.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:06.707Z,1513267026.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:07.083Z,1513267027.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:07.466Z,1513267027.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:07.865Z,1513267027.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:08.268Z,1513267028.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:08.667Z,1513267028.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:09.071Z,1513267029.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:09.475Z,1513267029.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:09.914Z,1513267029.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:10.265Z,1513267030.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:10.671Z,1513267030.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:11.066Z,1513267031.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:11.468Z,1513267031.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:11.865Z,1513267031.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:12.275Z,1513267032.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:12.676Z,1513267032.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:13.084Z,1513267033.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:13.470Z,1513267033.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:13.872Z,1513267033.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:14.278Z,1513267034.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:14.679Z,1513267034.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:18.251Z,1513267038.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:18.395Z,1513267038.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:18.777Z,1513267038.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:19.179Z,1513267039.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:19.548Z,1513267039.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:19.987Z,1513267039.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:20.350Z,1513267040.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:20.756Z,1513267040.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:21.163Z,1513267041.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:21.543Z,1513267041.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:21.951Z,1513267041.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:22.342Z,1513267042.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:22.788Z,1513267042.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:23.174Z,1513267043.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:23.567Z,1513267043.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:23.954Z,1513267043.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:24.350Z,1513267044.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:24.759Z,1513267044.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:25.151Z,1513267045.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:25.548Z,1513267045.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:25.985Z,1513267045.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:26.365Z,1513267046.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:26.752Z,1513267046.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:27.173Z,1513267047.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:27.546Z,1513267047.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:27.977Z,1513267047.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:28.403Z,1513267048.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:28.764Z,1513267048.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:29.180Z,1513267049.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:29.575Z,1513267049.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:29.962Z,1513267049.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:30.344Z,1513267050.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:30.744Z,1513267050.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:31.144Z,1513267051.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:31.544Z,1513267051.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:31.947Z,1513267051.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:32.399Z,1513267052.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:32.787Z,1513267052.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:33.159Z,1513267053.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:33.549Z,1513267053.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:33.951Z,1513267053.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:34.348Z,1513267054.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:34.750Z,1513267054.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:35.168Z,1513267055.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:35.594Z,1513267055.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:35.957Z,1513267055.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:36.335Z,1513267056.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:36.746Z,1513267056.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:37.147Z,1513267057.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:37.551Z,1513267057.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:37.948Z,1513267057.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:38.357Z,1513267058.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:38.789Z,1513267058.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:39.163Z,1513267059.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:39.551Z,1513267059.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:39.959Z,1513267059.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:40.375Z,1513267060.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:40.782Z,1513267060.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:41.165Z,1513267061.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:41.571Z,1513267061.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:42.084Z,1513267062.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:42.347Z,1513267062.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:42.779Z,1513267062.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:43.140Z,1513267063.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:43.546Z,1513267063.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:43.951Z,1513267063.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:44.350Z,1513267064.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:44.772Z,1513267064.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:45.148Z,1513267065.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:45.547Z,1513267065.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:45.947Z,1513267065.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:46.344Z,1513267066.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:46.746Z,1513267066.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:47.152Z,1513267067.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:47.564Z,1513267067.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:47.962Z,1513267067.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:48.466Z,1513267068.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:48.764Z,1513267068.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:49.157Z,1513267069.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:49.563Z,1513267069.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:49.934Z,1513267069.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:50.444Z,1513267070.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:50.771Z,1513267070.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:51.179Z,1513267071.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:51.540Z,1513267071.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:51.940Z,1513267071.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:52.343Z,1513267072.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:52.772Z,1513267072.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:53.169Z,1513267073.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:53.552Z,1513267073.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:53.968Z,1513267073.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:54.349Z,1513267074.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:54.797Z,1513267074.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:55.151Z,1513267075.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:55.551Z,1513267075.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:55.956Z,1513267075.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:56.363Z,1513267076.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:56.761Z,1513267076.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:57.159Z,1513267077.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:57.558Z,1513267077.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:57.970Z,1513267077.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:58.351Z,1513267078.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:58.745Z,1513267078.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:59.148Z,1513267079.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:59.577Z,1513267079.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:57:59.948Z,1513267079.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:00.352Z,1513267080.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:00.747Z,1513267080.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:01.142Z,1513267081.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:01.586Z,1513267081.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:01.944Z,1513267081.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:02.354Z,1513267082.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:02.756Z,1513267082.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:03.172Z,1513267083.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:03.553Z,1513267083.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:03.950Z,1513267083.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:04.524Z,1513267084.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:04.743Z,1513267084.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:05.180Z,1513267085.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:05.552Z,1513267085.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:05.959Z,1513267085.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:06.344Z,1513267086.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:06.759Z,1513267086.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:07.147Z,1513267087.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:07.548Z,1513267087.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:07.942Z,1513267087.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:08.357Z,1513267088.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:08.780Z,1513267088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:09.160Z,1513267089.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:09.549Z,1513267089.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:09.954Z,1513267089.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:10.360Z,1513267090.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:10.779Z,1513267090.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:11.156Z,1513267091.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:11.565Z,1513267091.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:11.971Z,1513267091.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:12.351Z,1513267092.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:12.743Z,1513267092.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:13.154Z,1513267093.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:13.590Z,1513267093.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:13.984Z,1513267093.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:14.370Z,1513267094.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:14.770Z,1513267094.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:18.192Z,1513267098.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:18.196Z,1513267098.196 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T15:53:17.4Z
2017-12-14T15:58:18.196Z,1513267098.196 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T15:58:18.196Z,1513267098.196 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T15:58:18.323Z,1513267098.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:19.174Z,1513267099.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:19.304Z,1513267099.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:19.678Z,1513267099.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:20.136Z,1513267100.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:23.474Z,1513267103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:23.569Z,1513267103.569 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0356.lzma
2017-12-14T15:58:23.659Z,1513267103.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:23.958Z,1513267103.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:24.304Z,1513267104.304 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0356.lzma.bak
2017-12-14T15:58:24.304Z,1513267104.304 [DataOverHttps](INFO): SBD MOMSN=5439087
2017-12-14T15:58:24.395Z,1513267104.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:25.503Z,1513267105.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:25.651Z,1513267105.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:29.120Z,1513267109.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:29.267Z,1513267109.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:29.633Z,1513267109.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:30.103Z,1513267110.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:30.503Z,1513267110.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:30.844Z,1513267110.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:34.352Z,1513267114.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:34.428Z,1513267114.428 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0357.lzma
2017-12-14T15:58:34.512Z,1513267114.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:34.884Z,1513267114.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:35.212Z,1513267115.212 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0357.lzma.bak
2017-12-14T15:58:35.212Z,1513267115.212 [DataOverHttps](INFO): SBD MOMSN=5439089
2017-12-14T15:58:35.286Z,1513267115.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:36.710Z,1513267116.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:36.714Z,1513267116.714 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T15:58:36.714Z,1513267116.714 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T15:58:36.714Z,1513267116.714 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T15:58:36.843Z,1513267116.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:40.312Z,1513267120.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:40.312Z,1513267120.312 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 308
2017-12-14T15:58:40.312Z,1513267120.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T15:58:40.314Z,1513267120.314 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:40.314Z,1513267120.314 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 308
2017-12-14T15:58:40.314Z,1513267120.314 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T15:58:40.316Z,1513267120.316 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:40.316Z,1513267120.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 308
2017-12-14T15:58:40.316Z,1513267120.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T15:58:40.355Z,1513267120.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T15:58:40.355Z,1513267120.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T15:58:40.355Z,1513267120.355 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T15:58:40.513Z,1513267120.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T15:58:40.513Z,1513267120.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 308
2017-12-14T15:58:40.514Z,1513267120.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T15:58:40.514Z,1513267120.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 308
2017-12-14T15:58:40.514Z,1513267120.514 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T15:58:40.514Z,1513267120.514 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 308
2017-12-14T15:58:40.858Z,1513267120.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T15:58:40.859Z,1513267120.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:58:40.859Z,1513267120.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:58:40.859Z,1513267120.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T15:58:40.860Z,1513267120.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:58:40.860Z,1513267120.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:58:40.860Z,1513267120.860 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T15:58:40.861Z,1513267120.861 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T15:58:40.861Z,1513267120.861 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T15:58:41.251Z,1513267121.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:41.623Z,1513267121.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:42.036Z,1513267122.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:42.439Z,1513267122.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:42.884Z,1513267122.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:43.248Z,1513267123.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:43.610Z,1513267123.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:44.035Z,1513267124.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:44.498Z,1513267124.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:44.847Z,1513267124.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:45.240Z,1513267125.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:45.615Z,1513267125.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:46.108Z,1513267126.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:46.480Z,1513267126.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:46.831Z,1513267126.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:47.224Z,1513267127.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:47.631Z,1513267127.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:48.123Z,1513267128.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:48.476Z,1513267128.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:48.832Z,1513267128.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:49.222Z,1513267129.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:49.632Z,1513267129.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:50.151Z,1513267130.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:50.453Z,1513267130.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:50.846Z,1513267130.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:51.255Z,1513267131.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:51.627Z,1513267131.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:52.105Z,1513267132.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:52.507Z,1513267132.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:52.830Z,1513267132.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:53.230Z,1513267133.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:53.698Z,1513267133.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:54.119Z,1513267134.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:54.479Z,1513267134.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:54.837Z,1513267134.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:55.218Z,1513267135.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:55.687Z,1513267135.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:56.031Z,1513267136.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:56.476Z,1513267136.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:56.847Z,1513267136.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:57.236Z,1513267137.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:57.619Z,1513267137.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:58.050Z,1513267138.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:58.498Z,1513267138.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:58.864Z,1513267138.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:59.275Z,1513267139.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:58:59.643Z,1513267139.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:00.034Z,1513267140.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:00.511Z,1513267140.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:00.849Z,1513267140.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:01.235Z,1513267141.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:01.612Z,1513267141.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:02.122Z,1513267142.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:02.468Z,1513267142.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:02.878Z,1513267142.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:03.222Z,1513267143.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:03.636Z,1513267143.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:04.108Z,1513267144.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:04.455Z,1513267144.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:04.829Z,1513267144.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:05.224Z,1513267145.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:05.687Z,1513267145.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:06.111Z,1513267146.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:06.455Z,1513267146.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:06.854Z,1513267146.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:07.218Z,1513267147.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:07.613Z,1513267147.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:08.100Z,1513267148.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:08.464Z,1513267148.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:08.867Z,1513267148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:09.235Z,1513267149.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:09.632Z,1513267149.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:10.152Z,1513267150.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:10.477Z,1513267150.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:10.842Z,1513267150.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:11.228Z,1513267151.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:11.664Z,1513267151.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:12.119Z,1513267152.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:12.507Z,1513267152.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:12.851Z,1513267152.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:13.243Z,1513267153.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:13.652Z,1513267153.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:14.043Z,1513267154.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:14.502Z,1513267154.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:14.915Z,1513267154.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:15.233Z,1513267155.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:15.655Z,1513267155.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:16.095Z,1513267156.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:16.421Z,1513267156.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:16.869Z,1513267156.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:17.235Z,1513267157.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:17.632Z,1513267157.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:18.116Z,1513267158.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:18.434Z,1513267158.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:18.865Z,1513267158.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:19.219Z,1513267159.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:19.620Z,1513267159.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:20.096Z,1513267160.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:20.439Z,1513267160.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:20.834Z,1513267160.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:21.230Z,1513267161.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:21.630Z,1513267161.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:22.097Z,1513267162.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:22.459Z,1513267162.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:22.840Z,1513267162.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:23.220Z,1513267163.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:23.620Z,1513267163.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:24.055Z,1513267164.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:24.109Z,1513267164.109 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T15:59:24.482Z,1513267164.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:24.855Z,1513267164.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:25.243Z,1513267165.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:25.634Z,1513267165.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:26.041Z,1513267166.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:26.503Z,1513267166.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:26.858Z,1513267166.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:27.216Z,1513267167.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:27.698Z,1513267167.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:28.040Z,1513267168.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:28.498Z,1513267168.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:28.858Z,1513267168.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:29.222Z,1513267169.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:29.619Z,1513267169.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:30.100Z,1513267170.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:30.447Z,1513267170.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:30.860Z,1513267170.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:31.234Z,1513267171.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:31.612Z,1513267171.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:32.109Z,1513267172.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:32.452Z,1513267172.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:32.836Z,1513267172.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:33.225Z,1513267173.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:33.624Z,1513267173.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:34.136Z,1513267174.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:34.472Z,1513267174.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:34.843Z,1513267174.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:35.316Z,1513267175.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:35.644Z,1513267175.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:36.143Z,1513267176.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:36.467Z,1513267176.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:36.840Z,1513267176.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:37.331Z,1513267177.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:40.719Z,1513267180.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:40.870Z,1513267180.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:41.258Z,1513267181.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:41.654Z,1513267181.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:42.051Z,1513267182.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:42.512Z,1513267182.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:42.875Z,1513267182.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:43.244Z,1513267183.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:43.644Z,1513267183.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:44.104Z,1513267184.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:44.442Z,1513267184.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:44.829Z,1513267184.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:45.235Z,1513267185.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:45.632Z,1513267185.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:46.113Z,1513267186.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:46.448Z,1513267186.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:46.874Z,1513267186.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:47.244Z,1513267187.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:47.625Z,1513267187.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:48.102Z,1513267188.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:48.446Z,1513267188.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:48.868Z,1513267188.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:49.216Z,1513267189.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:49.621Z,1513267189.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:50.127Z,1513267190.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:50.468Z,1513267190.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:50.832Z,1513267190.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:51.262Z,1513267191.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:51.636Z,1513267191.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:52.035Z,1513267192.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:52.456Z,1513267192.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:52.850Z,1513267192.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:53.241Z,1513267193.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:53.620Z,1513267193.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:54.046Z,1513267194.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:54.506Z,1513267194.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:54.854Z,1513267194.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:55.227Z,1513267195.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:55.626Z,1513267195.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:56.029Z,1513267196.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:56.524Z,1513267196.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:56.878Z,1513267196.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:57.233Z,1513267197.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:57.628Z,1513267197.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:58.102Z,1513267198.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:58.468Z,1513267198.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:58.836Z,1513267198.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:59.222Z,1513267199.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T15:59:59.648Z,1513267199.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:00.111Z,1513267200.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:00.470Z,1513267200.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:00.843Z,1513267200.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:01.236Z,1513267201.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:01.622Z,1513267201.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:02.120Z,1513267202.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:02.488Z,1513267202.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:02.854Z,1513267202.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:03.292Z,1513267203.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:03.631Z,1513267203.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:04.127Z,1513267204.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:04.460Z,1513267204.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:04.871Z,1513267204.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:05.219Z,1513267205.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:05.624Z,1513267205.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:06.065Z,1513267206.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:06.478Z,1513267206.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:06.836Z,1513267206.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:07.226Z,1513267207.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:07.638Z,1513267207.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:08.033Z,1513267208.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:08.507Z,1513267208.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:08.850Z,1513267208.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:09.238Z,1513267209.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:09.650Z,1513267209.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:10.049Z,1513267210.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:10.479Z,1513267210.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:10.863Z,1513267210.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:11.250Z,1513267211.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:11.620Z,1513267211.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:12.107Z,1513267212.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:12.471Z,1513267212.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:12.839Z,1513267212.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:13.266Z,1513267213.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:13.627Z,1513267213.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:14.132Z,1513267214.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:14.468Z,1513267214.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:14.940Z,1513267214.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:15.248Z,1513267215.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:15.690Z,1513267215.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:16.119Z,1513267216.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:16.465Z,1513267216.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:16.846Z,1513267216.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:17.236Z,1513267217.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:17.624Z,1513267217.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:18.119Z,1513267218.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:18.459Z,1513267218.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:18.890Z,1513267218.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:19.231Z,1513267219.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:19.630Z,1513267219.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:20.048Z,1513267220.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:20.435Z,1513267220.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:20.925Z,1513267220.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:21.215Z,1513267221.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:21.618Z,1513267221.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:22.051Z,1513267222.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:22.495Z,1513267222.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:22.860Z,1513267222.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:23.250Z,1513267223.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:23.650Z,1513267223.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:24.047Z,1513267224.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:24.523Z,1513267224.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:24.852Z,1513267224.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:25.236Z,1513267225.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:25.688Z,1513267225.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:26.113Z,1513267226.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:26.455Z,1513267226.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:26.863Z,1513267226.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:27.224Z,1513267227.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:27.672Z,1513267227.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:28.119Z,1513267228.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:28.474Z,1513267228.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:28.867Z,1513267228.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:29.227Z,1513267229.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:29.623Z,1513267229.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:30.097Z,1513267230.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:30.438Z,1513267230.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:30.872Z,1513267230.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:31.239Z,1513267231.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:31.685Z,1513267231.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:32.108Z,1513267232.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:32.466Z,1513267232.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:32.847Z,1513267232.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:33.236Z,1513267233.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:33.628Z,1513267233.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:34.032Z,1513267234.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:34.448Z,1513267234.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:34.847Z,1513267234.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:35.236Z,1513267235.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:35.638Z,1513267235.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:36.063Z,1513267236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:36.487Z,1513267236.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:36.867Z,1513267236.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:37.232Z,1513267237.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:40.711Z,1513267240.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:40.857Z,1513267240.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:41.214Z,1513267241.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:41.614Z,1513267241.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:41.981Z,1513267241.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:42.396Z,1513267242.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:42.790Z,1513267242.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:43.202Z,1513267243.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:43.607Z,1513267243.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:44.003Z,1513267244.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:44.407Z,1513267244.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:44.781Z,1513267244.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:45.190Z,1513267245.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:45.586Z,1513267245.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:45.991Z,1513267245.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:46.395Z,1513267246.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:46.792Z,1513267246.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:47.192Z,1513267247.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:47.600Z,1513267247.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:48.036Z,1513267248.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:48.487Z,1513267248.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:48.805Z,1513267248.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:49.189Z,1513267249.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:49.626Z,1513267249.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:49.993Z,1513267249.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:50.491Z,1513267250.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:50.794Z,1513267250.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:51.187Z,1513267251.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:51.623Z,1513267251.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:51.999Z,1513267251.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:52.477Z,1513267252.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:52.812Z,1513267252.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:53.187Z,1513267253.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:53.585Z,1513267253.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:53.986Z,1513267253.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:54.389Z,1513267254.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:54.831Z,1513267254.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:55.200Z,1513267255.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:55.598Z,1513267255.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:55.999Z,1513267255.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:56.376Z,1513267256.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:56.803Z,1513267256.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:57.190Z,1513267257.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:57.583Z,1513267257.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:58.109Z,1513267258.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:58.418Z,1513267258.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:58.837Z,1513267258.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:59.224Z,1513267259.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:59.585Z,1513267259.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:00:59.995Z,1513267259.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:00.392Z,1513267260.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:00.796Z,1513267260.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:01.207Z,1513267261.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:01.607Z,1513267261.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:02.007Z,1513267262.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:02.385Z,1513267262.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:02.794Z,1513267262.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:03.191Z,1513267263.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:03.595Z,1513267263.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:03.981Z,1513267263.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:04.472Z,1513267264.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:04.804Z,1513267264.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:05.211Z,1513267265.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:05.579Z,1513267265.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:05.981Z,1513267265.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:06.478Z,1513267266.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:06.795Z,1513267266.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:07.199Z,1513267267.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:07.607Z,1513267267.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:08.003Z,1513267268.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:08.395Z,1513267268.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:08.786Z,1513267268.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:09.202Z,1513267269.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:09.585Z,1513267269.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:09.987Z,1513267269.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:10.467Z,1513267270.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:10.820Z,1513267270.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:11.219Z,1513267271.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:11.587Z,1513267271.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:12.082Z,1513267272.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:12.383Z,1513267272.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:12.783Z,1513267272.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:13.192Z,1513267273.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:13.591Z,1513267273.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:14.097Z,1513267274.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:14.411Z,1513267274.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:14.788Z,1513267274.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:15.182Z,1513267275.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:15.599Z,1513267275.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:15.995Z,1513267275.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:16.407Z,1513267276.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:16.811Z,1513267276.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:17.266Z,1513267277.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:17.654Z,1513267277.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:17.984Z,1513267277.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:18.514Z,1513267278.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:18.803Z,1513267278.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:19.220Z,1513267279.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:19.612Z,1513267279.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:20.045Z,1513267280.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:20.526Z,1513267280.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:20.893Z,1513267280.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:21.199Z,1513267281.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:21.588Z,1513267281.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:22.094Z,1513267282.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:22.414Z,1513267282.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:22.855Z,1513267282.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:23.214Z,1513267283.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:23.608Z,1513267283.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:24.064Z,1513267284.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:24.394Z,1513267284.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:24.815Z,1513267284.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:25.190Z,1513267285.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:25.597Z,1513267285.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:26.115Z,1513267286.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:26.427Z,1513267286.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:26.784Z,1513267286.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:27.187Z,1513267287.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:27.585Z,1513267287.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:28.004Z,1513267288.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:28.423Z,1513267288.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:28.806Z,1513267288.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:29.204Z,1513267289.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:29.611Z,1513267289.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:30.008Z,1513267290.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:30.391Z,1513267290.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:30.787Z,1513267290.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:31.206Z,1513267291.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:31.603Z,1513267291.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:32.052Z,1513267292.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:32.503Z,1513267292.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:32.807Z,1513267292.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:33.180Z,1513267293.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:33.667Z,1513267293.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:33.984Z,1513267293.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:34.479Z,1513267294.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:34.814Z,1513267294.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:35.209Z,1513267295.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:35.585Z,1513267295.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:35.986Z,1513267295.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:36.388Z,1513267296.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:36.846Z,1513267296.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:37.188Z,1513267297.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:37.595Z,1513267297.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:41.196Z,1513267301.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:41.196Z,1513267301.196 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 309
2017-12-14T16:01:41.196Z,1513267301.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:01:41.198Z,1513267301.198 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:41.198Z,1513267301.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 309
2017-12-14T16:01:41.198Z,1513267301.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:01:41.200Z,1513267301.200 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:41.200Z,1513267301.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 309
2017-12-14T16:01:41.200Z,1513267301.200 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:01:41.246Z,1513267301.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:01:41.247Z,1513267301.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:01:41.248Z,1513267301.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:01:41.358Z,1513267301.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:01:41.358Z,1513267301.358 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 309
2017-12-14T16:01:41.358Z,1513267301.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:01:41.358Z,1513267301.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 309
2017-12-14T16:01:41.359Z,1513267301.359 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:01:41.359Z,1513267301.359 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 309
2017-12-14T16:01:41.722Z,1513267301.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:01:41.723Z,1513267301.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:01:41.723Z,1513267301.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:01:41.723Z,1513267301.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:01:41.724Z,1513267301.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:01:41.724Z,1513267301.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:01:41.724Z,1513267301.724 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:01:41.741Z,1513267301.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:01:41.741Z,1513267301.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:01:42.154Z,1513267302.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:42.550Z,1513267302.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:42.916Z,1513267302.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:43.327Z,1513267303.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:43.730Z,1513267303.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:44.196Z,1513267304.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:44.509Z,1513267304.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:44.907Z,1513267304.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:45.311Z,1513267305.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:45.708Z,1513267305.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:46.127Z,1513267306.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:46.523Z,1513267306.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:46.922Z,1513267306.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:47.308Z,1513267307.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:47.709Z,1513267307.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:48.111Z,1513267308.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:48.574Z,1513267308.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:48.907Z,1513267308.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:49.321Z,1513267309.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:49.732Z,1513267309.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:50.128Z,1513267310.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:50.519Z,1513267310.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:50.947Z,1513267310.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:51.307Z,1513267311.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:51.708Z,1513267311.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:52.167Z,1513267312.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:52.523Z,1513267312.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:52.926Z,1513267312.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:53.311Z,1513267313.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:53.707Z,1513267313.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:54.147Z,1513267314.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:54.508Z,1513267314.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:54.927Z,1513267314.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:55.320Z,1513267315.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:55.727Z,1513267315.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:56.158Z,1513267316.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:56.508Z,1513267316.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:56.971Z,1513267316.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:57.339Z,1513267317.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:57.728Z,1513267317.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:58.160Z,1513267318.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:58.543Z,1513267318.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:58.949Z,1513267318.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:59.357Z,1513267319.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:01:59.746Z,1513267319.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:00.143Z,1513267320.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:00.531Z,1513267320.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:00.923Z,1513267320.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:01.324Z,1513267321.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:01.739Z,1513267321.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:02.143Z,1513267322.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:02.569Z,1513267322.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:02.959Z,1513267322.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:03.370Z,1513267323.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:03.736Z,1513267323.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:04.171Z,1513267324.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:04.574Z,1513267324.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:04.975Z,1513267324.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:05.332Z,1513267325.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:05.770Z,1513267325.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:06.173Z,1513267326.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:06.623Z,1513267326.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:06.968Z,1513267326.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:07.363Z,1513267327.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:07.739Z,1513267327.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:08.191Z,1513267328.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:08.547Z,1513267328.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:08.936Z,1513267328.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:09.340Z,1513267329.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:09.747Z,1513267329.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:10.171Z,1513267330.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:10.524Z,1513267330.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:10.994Z,1513267330.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:11.329Z,1513267331.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:11.736Z,1513267331.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:12.225Z,1513267332.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:12.597Z,1513267332.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:12.931Z,1513267332.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:13.347Z,1513267333.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:13.750Z,1513267333.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:14.150Z,1513267334.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:14.591Z,1513267334.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:14.922Z,1513267334.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:15.316Z,1513267335.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:15.743Z,1513267335.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:16.135Z,1513267336.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:16.558Z,1513267336.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:17.011Z,1513267337.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:17.387Z,1513267337.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:17.742Z,1513267337.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:18.154Z,1513267338.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:18.524Z,1513267338.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:18.954Z,1513267338.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:19.327Z,1513267339.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:19.726Z,1513267339.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:20.148Z,1513267340.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:20.522Z,1513267340.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:20.958Z,1513267340.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:21.322Z,1513267341.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:21.723Z,1513267341.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:22.175Z,1513267342.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:22.538Z,1513267342.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:22.931Z,1513267342.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:23.321Z,1513267343.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:23.719Z,1513267343.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:24.144Z,1513267344.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:24.523Z,1513267344.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:24.921Z,1513267344.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:25.377Z,1513267345.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:25.735Z,1513267345.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:26.189Z,1513267346.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:26.527Z,1513267346.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:26.935Z,1513267346.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:27.348Z,1513267347.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:27.710Z,1513267347.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:28.139Z,1513267348.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:28.543Z,1513267348.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:28.934Z,1513267348.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:29.335Z,1513267349.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:29.713Z,1513267349.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:30.114Z,1513267350.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:30.516Z,1513267350.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:30.914Z,1513267350.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:31.437Z,1513267351.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:31.751Z,1513267351.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:32.150Z,1513267352.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:32.512Z,1513267352.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:32.920Z,1513267352.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:33.317Z,1513267353.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:33.718Z,1513267353.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:34.160Z,1513267354.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:34.532Z,1513267354.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:34.979Z,1513267354.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:35.322Z,1513267355.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:35.719Z,1513267355.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:36.154Z,1513267356.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:36.523Z,1513267356.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:36.923Z,1513267356.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:37.329Z,1513267357.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:37.735Z,1513267357.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:41.275Z,1513267361.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:41.497Z,1513267361.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:41.865Z,1513267361.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:42.283Z,1513267362.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:42.662Z,1513267362.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:43.095Z,1513267363.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:43.468Z,1513267363.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:43.868Z,1513267363.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:44.243Z,1513267364.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:44.723Z,1513267364.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:45.044Z,1513267365.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:45.446Z,1513267365.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:45.839Z,1513267365.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:46.265Z,1513267366.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:46.670Z,1513267366.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:47.067Z,1513267367.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:47.471Z,1513267367.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:47.896Z,1513267367.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:48.268Z,1513267368.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:48.721Z,1513267368.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:49.052Z,1513267369.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:49.476Z,1513267369.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:49.852Z,1513267369.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:50.248Z,1513267370.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:50.648Z,1513267370.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:51.135Z,1513267371.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:51.472Z,1513267371.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:51.879Z,1513267371.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:52.251Z,1513267372.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:52.646Z,1513267372.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:53.051Z,1513267373.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:53.448Z,1513267373.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:53.847Z,1513267373.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:54.294Z,1513267374.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:54.688Z,1513267374.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:55.062Z,1513267375.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:55.452Z,1513267375.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:55.887Z,1513267375.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:56.247Z,1513267376.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:56.672Z,1513267376.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:57.066Z,1513267377.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:57.470Z,1513267377.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:57.859Z,1513267377.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:58.247Z,1513267378.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:58.651Z,1513267378.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:59.060Z,1513267379.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:59.460Z,1513267379.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:02:59.859Z,1513267379.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:00.255Z,1513267380.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:00.692Z,1513267380.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:01.059Z,1513267381.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:01.463Z,1513267381.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:01.856Z,1513267381.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:02.241Z,1513267382.241 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T16:03:02.241Z,1513267382.241 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:03:02.241Z,1513267382.241 [BPC1](ERROR): Data Fault
2017-12-14T16:03:02.249Z,1513267382.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:02.262Z,1513267382.262 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:03:02.652Z,1513267382.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:03.049Z,1513267383.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:03.452Z,1513267383.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:03.477Z,1513267383.477 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:03:03.477Z,1513267383.477 [BPC1] No Fault, FailCount= 1
2017-12-14T16:03:03.928Z,1513267383.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:04.282Z,1513267384.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:04.658Z,1513267384.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:05.058Z,1513267385.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:05.456Z,1513267385.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:05.855Z,1513267385.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:06.263Z,1513267386.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:06.659Z,1513267386.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:07.066Z,1513267387.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:07.467Z,1513267387.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:07.867Z,1513267387.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:08.257Z,1513267388.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:08.656Z,1513267388.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:09.063Z,1513267389.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:09.471Z,1513267389.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:09.864Z,1513267389.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:10.274Z,1513267390.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:10.667Z,1513267390.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:11.070Z,1513267391.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:11.472Z,1513267391.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:11.870Z,1513267391.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:12.271Z,1513267392.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:12.645Z,1513267392.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:13.072Z,1513267393.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:13.475Z,1513267393.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:13.860Z,1513267393.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:14.247Z,1513267394.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:14.661Z,1513267394.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:15.049Z,1513267395.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:15.449Z,1513267395.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:15.848Z,1513267395.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:16.267Z,1513267396.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:16.700Z,1513267396.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:17.068Z,1513267397.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:17.455Z,1513267397.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:17.854Z,1513267397.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:18.259Z,1513267398.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:18.653Z,1513267398.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:19.058Z,1513267399.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:19.472Z,1513267399.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:19.883Z,1513267399.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:20.256Z,1513267400.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:20.663Z,1513267400.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:21.064Z,1513267401.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:21.472Z,1513267401.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:21.863Z,1513267401.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:22.257Z,1513267402.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:22.690Z,1513267402.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:23.053Z,1513267403.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:23.451Z,1513267403.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:23.849Z,1513267403.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:24.289Z,1513267404.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:24.656Z,1513267404.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:25.091Z,1513267405.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:25.452Z,1513267405.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:25.890Z,1513267405.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:26.303Z,1513267406.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:26.680Z,1513267406.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:27.067Z,1513267407.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:27.467Z,1513267407.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:27.867Z,1513267407.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:28.255Z,1513267408.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:28.644Z,1513267408.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:29.047Z,1513267409.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:29.448Z,1513267409.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:29.907Z,1513267409.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:30.253Z,1513267410.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:30.652Z,1513267410.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:31.048Z,1513267411.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:31.445Z,1513267411.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:31.847Z,1513267411.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:32.259Z,1513267412.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:32.707Z,1513267412.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:33.056Z,1513267413.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:33.460Z,1513267413.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:33.857Z,1513267413.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:34.299Z,1513267414.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:34.659Z,1513267414.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:35.062Z,1513267415.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:35.460Z,1513267415.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:35.912Z,1513267415.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:36.260Z,1513267416.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:36.656Z,1513267416.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:37.058Z,1513267417.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:37.061Z,1513267417.061 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:03:37.061Z,1513267417.061 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:03:37.061Z,1513267417.061 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:03:37.061Z,1513267417.061 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:03:37.460Z,1513267417.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:37.463Z,1513267417.463 [Default:CheckIn:D] Stopped
2017-12-14T16:03:37.463Z,1513267417.463 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:03:37.857Z,1513267417.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:37.860Z,1513267417.860 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 930.367904 min 
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn:E] Stopped
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn] Stopped
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn](INFO): Running loop #90
2017-12-14T16:03:37.862Z,1513267417.862 [Default:CheckIn] Running Loop=90
2017-12-14T16:03:37.863Z,1513267417.863 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:03:37.863Z,1513267417.863 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:03:41.412Z,1513267421.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:41.559Z,1513267421.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:41.911Z,1513267421.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:42.358Z,1513267422.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:42.704Z,1513267422.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:43.084Z,1513267423.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:43.487Z,1513267423.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:43.879Z,1513267423.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:44.311Z,1513267424.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:44.727Z,1513267424.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:45.111Z,1513267425.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:45.528Z,1513267425.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:45.887Z,1513267425.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:46.335Z,1513267426.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:46.685Z,1513267426.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:47.096Z,1513267427.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:47.535Z,1513267427.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:47.888Z,1513267427.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:48.312Z,1513267428.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:48.731Z,1513267428.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:49.091Z,1513267429.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:49.489Z,1513267429.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:49.888Z,1513267429.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:50.290Z,1513267430.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:50.691Z,1513267430.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:51.096Z,1513267431.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:51.488Z,1513267431.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:51.927Z,1513267431.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:52.288Z,1513267432.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:52.693Z,1513267432.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:53.098Z,1513267433.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:53.500Z,1513267433.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:53.904Z,1513267433.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:54.289Z,1513267434.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:54.687Z,1513267434.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:55.141Z,1513267435.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:55.491Z,1513267435.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:55.889Z,1513267435.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:56.303Z,1513267436.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:56.716Z,1513267436.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:57.107Z,1513267437.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:57.482Z,1513267437.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:57.883Z,1513267437.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:58.307Z,1513267438.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:58.693Z,1513267438.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:59.102Z,1513267439.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:59.504Z,1513267439.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:03:59.892Z,1513267439.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:00.294Z,1513267440.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:00.694Z,1513267440.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:01.093Z,1513267441.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:01.543Z,1513267441.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:01.878Z,1513267441.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:02.303Z,1513267442.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:02.706Z,1513267442.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:03.096Z,1513267443.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:03.475Z,1513267443.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:03.879Z,1513267443.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:04.279Z,1513267444.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:04.732Z,1513267444.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:05.092Z,1513267445.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:05.498Z,1513267445.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:05.897Z,1513267445.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:06.286Z,1513267446.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:06.685Z,1513267446.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:07.087Z,1513267447.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:07.548Z,1513267447.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:07.908Z,1513267447.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:08.298Z,1513267448.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:08.735Z,1513267448.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:09.104Z,1513267449.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:09.478Z,1513267449.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:09.912Z,1513267449.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:10.284Z,1513267450.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:10.718Z,1513267450.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:11.158Z,1513267451.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:11.506Z,1513267451.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:11.904Z,1513267451.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:12.283Z,1513267452.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:12.680Z,1513267452.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:13.082Z,1513267453.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:13.484Z,1513267453.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:13.884Z,1513267453.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:14.360Z,1513267454.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:14.761Z,1513267454.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:15.104Z,1513267455.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:15.511Z,1513267455.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:15.880Z,1513267455.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:16.284Z,1513267456.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:16.683Z,1513267456.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:17.114Z,1513267457.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:17.555Z,1513267457.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:17.908Z,1513267457.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:18.284Z,1513267458.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:18.679Z,1513267458.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:19.111Z,1513267459.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:19.483Z,1513267459.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:19.885Z,1513267459.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:20.285Z,1513267460.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:20.727Z,1513267460.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:21.096Z,1513267461.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:21.491Z,1513267461.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:21.884Z,1513267461.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:22.288Z,1513267462.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:22.697Z,1513267462.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:23.099Z,1513267463.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:23.493Z,1513267463.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:23.947Z,1513267463.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:24.299Z,1513267464.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:24.683Z,1513267464.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:25.088Z,1513267465.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:25.491Z,1513267465.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:25.890Z,1513267465.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:26.308Z,1513267466.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:26.706Z,1513267466.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:27.103Z,1513267467.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:27.485Z,1513267467.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:27.885Z,1513267467.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:28.285Z,1513267468.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:28.686Z,1513267468.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:29.114Z,1513267469.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:29.510Z,1513267469.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:29.933Z,1513267469.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:30.322Z,1513267470.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:30.715Z,1513267470.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:31.128Z,1513267471.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:31.490Z,1513267471.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:31.899Z,1513267471.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:32.324Z,1513267472.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:32.707Z,1513267472.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:33.127Z,1513267473.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:33.533Z,1513267473.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:33.888Z,1513267473.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:34.288Z,1513267474.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:34.684Z,1513267474.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:35.099Z,1513267475.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:35.497Z,1513267475.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:35.897Z,1513267475.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:36.282Z,1513267476.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:36.754Z,1513267476.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:37.101Z,1513267477.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:37.479Z,1513267477.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:37.904Z,1513267477.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.350Z,1513267481.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.502Z,1513267481.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.824Z,1513267481.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.824Z,1513267481.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 310
2017-12-14T16:04:41.824Z,1513267481.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:04:41.826Z,1513267481.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.826Z,1513267481.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 310
2017-12-14T16:04:41.826Z,1513267481.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:04:41.828Z,1513267481.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:41.828Z,1513267481.828 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 310
2017-12-14T16:04:41.828Z,1513267481.828 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:04:41.860Z,1513267481.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:04:41.860Z,1513267481.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:04:41.860Z,1513267481.860 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:04:42.242Z,1513267482.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:04:42.242Z,1513267482.242 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 310
2017-12-14T16:04:42.243Z,1513267482.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:04:42.243Z,1513267482.243 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 310
2017-12-14T16:04:42.243Z,1513267482.243 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:04:42.243Z,1513267482.243 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 310
2017-12-14T16:04:42.626Z,1513267482.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:04:42.626Z,1513267482.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:04:42.627Z,1513267482.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:04:42.627Z,1513267482.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:04:42.627Z,1513267482.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:04:42.628Z,1513267482.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:04:42.628Z,1513267482.628 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:04:42.628Z,1513267482.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:04:42.634Z,1513267482.634 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:04:43.035Z,1513267483.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:43.439Z,1513267483.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:43.839Z,1513267483.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:44.231Z,1513267484.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:44.630Z,1513267484.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:45.039Z,1513267485.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:45.443Z,1513267485.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:45.843Z,1513267485.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:46.243Z,1513267486.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:46.631Z,1513267486.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:47.033Z,1513267487.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:47.439Z,1513267487.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:47.851Z,1513267487.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:48.232Z,1513267488.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:48.635Z,1513267488.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:49.036Z,1513267489.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:49.492Z,1513267489.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:49.834Z,1513267489.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:50.223Z,1513267490.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:50.635Z,1513267490.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:51.036Z,1513267491.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:51.440Z,1513267491.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:51.860Z,1513267491.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:52.234Z,1513267492.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:52.664Z,1513267492.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:53.035Z,1513267493.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:53.466Z,1513267493.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:53.863Z,1513267493.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:54.247Z,1513267494.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:54.638Z,1513267494.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:55.062Z,1513267495.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:55.448Z,1513267495.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:55.836Z,1513267495.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:56.247Z,1513267496.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:56.645Z,1513267496.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:57.038Z,1513267497.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:57.420Z,1513267497.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:57.820Z,1513267497.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:58.228Z,1513267498.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:58.633Z,1513267498.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:59.100Z,1513267499.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:59.432Z,1513267499.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:04:59.825Z,1513267499.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:00.228Z,1513267500.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:00.618Z,1513267500.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:01.024Z,1513267501.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:01.428Z,1513267501.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:01.828Z,1513267501.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:02.254Z,1513267502.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:02.627Z,1513267502.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:03.035Z,1513267503.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:03.464Z,1513267503.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:03.845Z,1513267503.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:04.229Z,1513267504.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:04.628Z,1513267504.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:05.037Z,1513267505.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:05.436Z,1513267505.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:05.855Z,1513267505.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:06.232Z,1513267506.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:06.612Z,1513267506.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:07.038Z,1513267507.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:07.439Z,1513267507.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:07.840Z,1513267507.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:08.216Z,1513267508.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:08.690Z,1513267508.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:09.024Z,1513267509.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:09.424Z,1513267509.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:09.831Z,1513267509.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:10.219Z,1513267510.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:10.617Z,1513267510.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:11.028Z,1513267511.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:11.424Z,1513267511.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:11.875Z,1513267511.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:12.227Z,1513267512.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:12.621Z,1513267512.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:13.023Z,1513267513.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:13.421Z,1513267513.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:13.823Z,1513267513.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:14.288Z,1513267514.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:14.635Z,1513267514.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:15.050Z,1513267515.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:15.475Z,1513267515.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:15.832Z,1513267515.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:16.229Z,1513267516.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:16.654Z,1513267516.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:17.044Z,1513267517.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:17.474Z,1513267517.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:17.836Z,1513267517.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:18.306Z,1513267518.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:18.633Z,1513267518.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:19.031Z,1513267519.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:19.436Z,1513267519.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:19.839Z,1513267519.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:20.216Z,1513267520.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:20.611Z,1513267520.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:21.095Z,1513267521.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:21.475Z,1513267521.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:21.831Z,1513267521.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:22.219Z,1513267522.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:22.626Z,1513267522.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:22.983Z,1513267522.983 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T16:05:22.983Z,1513267522.983 [NAL9602] Data Fault, FailCount= 5
2017-12-14T16:05:22.983Z,1513267522.983 [NAL9602](ERROR): Data Fault
2017-12-14T16:05:23.042Z,1513267523.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:23.066Z,1513267523.066 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T16:05:23.066Z,1513267523.066 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T16:05:23.378Z,1513267523.378 [NAL9602](INFO): Powering down
2017-12-14T16:05:23.424Z,1513267523.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:23.436Z,1513267523.436 [CBIT](INFO): Critical error at 20171214T160523
2017-12-14T16:05:23.822Z,1513267523.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:24.216Z,1513267524.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:24.664Z,1513267524.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:25.069Z,1513267525.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:25.421Z,1513267525.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:25.858Z,1513267525.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:26.222Z,1513267526.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:26.623Z,1513267526.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:27.021Z,1513267527.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:27.416Z,1513267527.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:27.871Z,1513267527.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:28.218Z,1513267528.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:28.627Z,1513267528.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:29.023Z,1513267529.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:29.422Z,1513267529.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:29.821Z,1513267529.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:30.222Z,1513267530.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:30.618Z,1513267530.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:31.077Z,1513267531.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:31.419Z,1513267531.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:31.818Z,1513267531.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:32.226Z,1513267532.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:32.633Z,1513267532.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:33.022Z,1513267533.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:33.424Z,1513267533.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:33.818Z,1513267533.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:34.275Z,1513267534.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:34.620Z,1513267534.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:35.027Z,1513267535.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:35.423Z,1513267535.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:35.831Z,1513267535.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:36.233Z,1513267536.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:36.631Z,1513267536.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:37.021Z,1513267537.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:37.516Z,1513267537.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:37.855Z,1513267537.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:38.210Z,1513267538.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:41.644Z,1513267541.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:41.754Z,1513267541.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:42.195Z,1513267542.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:42.546Z,1513267542.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:42.939Z,1513267542.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:43.339Z,1513267543.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:43.740Z,1513267543.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:44.276Z,1513267544.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:44.539Z,1513267544.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:44.935Z,1513267544.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:45.339Z,1513267545.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:45.743Z,1513267545.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:46.139Z,1513267546.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:46.536Z,1513267546.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:46.955Z,1513267546.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:47.343Z,1513267547.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:47.739Z,1513267547.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:48.147Z,1513267548.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:48.536Z,1513267548.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:48.947Z,1513267548.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:49.343Z,1513267549.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:49.746Z,1513267549.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:50.173Z,1513267550.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:50.562Z,1513267550.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:50.926Z,1513267550.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:51.329Z,1513267551.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:51.735Z,1513267551.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:52.136Z,1513267552.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:52.543Z,1513267552.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:52.935Z,1513267552.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:53.424Z,1513267553.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:53.732Z,1513267553.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:54.138Z,1513267554.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:54.545Z,1513267554.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:54.938Z,1513267554.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:55.338Z,1513267555.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:55.737Z,1513267555.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:56.185Z,1513267556.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:56.579Z,1513267556.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:56.946Z,1513267556.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:57.340Z,1513267557.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:57.744Z,1513267557.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:58.125Z,1513267558.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:58.554Z,1513267558.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:58.951Z,1513267558.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:59.330Z,1513267559.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:05:59.787Z,1513267559.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:00.191Z,1513267560.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:00.543Z,1513267560.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:00.945Z,1513267560.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:01.330Z,1513267561.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:01.732Z,1513267561.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:02.135Z,1513267562.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:02.560Z,1513267562.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:03.044Z,1513267563.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:03.340Z,1513267563.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:03.742Z,1513267563.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:04.164Z,1513267564.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:04.539Z,1513267564.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:04.976Z,1513267564.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:05.334Z,1513267565.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:05.813Z,1513267565.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:06.170Z,1513267566.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:06.542Z,1513267566.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:06.940Z,1513267566.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:07.344Z,1513267567.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:07.738Z,1513267567.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:08.138Z,1513267568.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:08.536Z,1513267568.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:08.944Z,1513267568.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:09.399Z,1513267569.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:09.739Z,1513267569.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:10.193Z,1513267570.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:10.538Z,1513267570.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:10.943Z,1513267570.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:11.343Z,1513267571.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:11.736Z,1513267571.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:12.139Z,1513267572.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:12.584Z,1513267572.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:12.939Z,1513267572.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:13.360Z,1513267573.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:13.736Z,1513267573.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:14.138Z,1513267574.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:14.543Z,1513267574.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:15.008Z,1513267575.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:15.337Z,1513267575.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:15.811Z,1513267575.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:16.147Z,1513267576.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:16.531Z,1513267576.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:16.990Z,1513267576.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:17.343Z,1513267577.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:17.737Z,1513267577.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:18.139Z,1513267578.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:18.538Z,1513267578.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:18.987Z,1513267578.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:19.343Z,1513267579.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:19.736Z,1513267579.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:20.153Z,1513267580.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:20.569Z,1513267580.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:21.115Z,1513267581.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:21.328Z,1513267581.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:21.768Z,1513267581.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:22.183Z,1513267582.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:22.568Z,1513267582.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:22.965Z,1513267582.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:23.368Z,1513267583.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:23.763Z,1513267583.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:24.233Z,1513267584.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:24.552Z,1513267584.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:24.958Z,1513267584.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:25.404Z,1513267585.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:25.780Z,1513267585.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:26.204Z,1513267586.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:26.571Z,1513267586.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:27.018Z,1513267587.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:27.371Z,1513267587.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:27.776Z,1513267587.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:28.142Z,1513267588.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:28.543Z,1513267588.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:28.962Z,1513267588.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:29.337Z,1513267589.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:29.734Z,1513267589.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:30.167Z,1513267590.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:30.540Z,1513267590.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:30.925Z,1513267590.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:31.358Z,1513267591.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:31.778Z,1513267591.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:32.210Z,1513267592.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:32.572Z,1513267592.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:32.947Z,1513267592.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:33.331Z,1513267593.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:33.734Z,1513267593.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:34.159Z,1513267594.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:34.539Z,1513267594.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:34.935Z,1513267594.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:35.371Z,1513267595.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:35.743Z,1513267595.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:36.217Z,1513267596.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:36.539Z,1513267596.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:36.945Z,1513267596.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:37.354Z,1513267597.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:37.791Z,1513267597.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:38.170Z,1513267598.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:38.556Z,1513267598.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:43.518Z,1513267603.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:43.657Z,1513267603.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:44.080Z,1513267604.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:44.464Z,1513267604.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:44.858Z,1513267604.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:45.219Z,1513267605.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:45.617Z,1513267605.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:46.084Z,1513267606.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:46.433Z,1513267606.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:46.825Z,1513267606.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:47.251Z,1513267607.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:47.666Z,1513267607.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:48.004Z,1513267608.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:48.418Z,1513267608.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:48.911Z,1513267608.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:49.240Z,1513267609.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:49.651Z,1513267609.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:50.056Z,1513267610.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:50.400Z,1513267610.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:50.809Z,1513267610.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:51.205Z,1513267611.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:51.655Z,1513267611.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:51.999Z,1513267611.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:52.460Z,1513267612.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:52.835Z,1513267612.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:53.225Z,1513267613.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:53.627Z,1513267613.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:53.999Z,1513267613.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:54.476Z,1513267614.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:54.813Z,1513267614.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:55.210Z,1513267615.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:55.622Z,1513267615.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:56.007Z,1513267616.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:56.491Z,1513267616.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:56.842Z,1513267616.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:57.240Z,1513267617.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:57.608Z,1513267617.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:58.086Z,1513267618.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:58.473Z,1513267618.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:58.835Z,1513267618.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:59.237Z,1513267619.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:06:59.652Z,1513267619.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:00.078Z,1513267620.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:00.416Z,1513267620.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:00.828Z,1513267620.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:01.235Z,1513267621.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:01.670Z,1513267621.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:02.085Z,1513267622.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:02.409Z,1513267622.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:02.815Z,1513267622.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:03.219Z,1513267623.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:03.614Z,1513267623.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:04.076Z,1513267624.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:04.418Z,1513267624.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:04.856Z,1513267624.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:05.219Z,1513267625.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:05.621Z,1513267625.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:06.018Z,1513267626.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:06.419Z,1513267626.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:06.831Z,1513267626.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:07.221Z,1513267627.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:07.616Z,1513267627.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:08.075Z,1513267628.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:08.465Z,1513267628.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:08.840Z,1513267628.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:09.257Z,1513267629.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:09.656Z,1513267629.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:10.091Z,1513267630.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:10.533Z,1513267630.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:10.866Z,1513267630.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:11.213Z,1513267631.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:11.660Z,1513267631.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:12.130Z,1513267632.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:12.486Z,1513267632.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:12.828Z,1513267632.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:13.233Z,1513267633.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:13.627Z,1513267633.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:14.098Z,1513267634.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:14.509Z,1513267634.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:14.852Z,1513267634.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:15.216Z,1513267635.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:15.615Z,1513267635.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:16.093Z,1513267636.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:16.438Z,1513267636.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:16.807Z,1513267636.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:17.208Z,1513267637.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:17.651Z,1513267637.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:18.084Z,1513267638.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:18.424Z,1513267638.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:18.864Z,1513267638.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:19.221Z,1513267639.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:19.599Z,1513267639.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:20.047Z,1513267640.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:20.456Z,1513267640.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:20.855Z,1513267640.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:21.217Z,1513267641.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:21.617Z,1513267641.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:22.019Z,1513267642.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:22.478Z,1513267642.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:22.844Z,1513267642.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:23.210Z,1513267643.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:23.245Z,1513267643.245 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T16:07:23.245Z,1513267643.245 [NAL9602] No Fault, FailCount= 5
2017-12-14T16:07:23.570Z,1513267643.570 [NAL9602](INFO): Powering up NAL9602
2017-12-14T16:07:23.623Z,1513267643.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:24.015Z,1513267644.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:24.463Z,1513267644.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:24.824Z,1513267644.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:25.226Z,1513267645.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:25.603Z,1513267645.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:26.063Z,1513267646.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:26.413Z,1513267646.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:26.813Z,1513267646.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:27.213Z,1513267647.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:27.631Z,1513267647.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:28.087Z,1513267648.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:28.420Z,1513267648.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:28.818Z,1513267648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:29.231Z,1513267649.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:29.623Z,1513267649.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:30.077Z,1513267650.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:30.505Z,1513267650.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:30.847Z,1513267650.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:31.230Z,1513267651.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:31.633Z,1513267651.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:32.076Z,1513267652.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:32.434Z,1513267652.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:32.848Z,1513267652.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:33.222Z,1513267653.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:33.622Z,1513267653.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:34.034Z,1513267654.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:34.374Z,1513267654.374 [NAL9602](INFO): NAL9602 initialized
2017-12-14T16:07:34.418Z,1513267654.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:34.819Z,1513267654.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:35.220Z,1513267655.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:35.632Z,1513267655.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:36.014Z,1513267656.014 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:07:36.014Z,1513267656.014 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:07:36.014Z,1513267656.014 [BPC1](ERROR): Communications Fault
2017-12-14T16:07:36.023Z,1513267656.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:36.075Z,1513267656.075 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:07:36.485Z,1513267656.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:36.885Z,1513267656.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:37.247Z,1513267657.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:37.260Z,1513267657.260 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:07:37.260Z,1513267657.260 [BPC1] No Fault, FailCount= 1
2017-12-14T16:07:37.678Z,1513267657.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:38.039Z,1513267658.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:38.493Z,1513267658.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:38.856Z,1513267658.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.364Z,1513267662.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.490Z,1513267662.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.862Z,1513267662.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.862Z,1513267662.862 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 311
2017-12-14T16:07:42.862Z,1513267662.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:07:42.864Z,1513267662.864 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.864Z,1513267662.864 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 311
2017-12-14T16:07:42.864Z,1513267662.864 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:07:42.866Z,1513267662.866 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:42.866Z,1513267662.866 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 311
2017-12-14T16:07:42.866Z,1513267662.866 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:07:42.878Z,1513267662.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:07:42.878Z,1513267662.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:07:42.879Z,1513267662.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:07:43.327Z,1513267663.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:07:43.327Z,1513267663.327 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 311
2017-12-14T16:07:43.327Z,1513267663.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:07:43.327Z,1513267663.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 311
2017-12-14T16:07:43.328Z,1513267663.328 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:07:43.328Z,1513267663.328 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 311
2017-12-14T16:07:43.660Z,1513267663.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:07:43.660Z,1513267663.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:07:43.660Z,1513267663.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:07:43.665Z,1513267663.665 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:07:43.665Z,1513267663.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:07:43.666Z,1513267663.666 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:07:43.666Z,1513267663.666 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:07:43.667Z,1513267663.667 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:07:43.667Z,1513267663.667 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:07:44.121Z,1513267664.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:44.466Z,1513267664.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:44.859Z,1513267664.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:45.255Z,1513267665.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:45.699Z,1513267665.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:46.110Z,1513267666.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:46.470Z,1513267666.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:46.852Z,1513267666.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:47.270Z,1513267667.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:47.655Z,1513267667.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:48.048Z,1513267668.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:48.456Z,1513267668.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:48.863Z,1513267668.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:49.263Z,1513267669.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:49.679Z,1513267669.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:50.063Z,1513267670.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:50.500Z,1513267670.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:50.867Z,1513267670.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:51.262Z,1513267671.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:51.654Z,1513267671.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:52.064Z,1513267672.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:52.482Z,1513267672.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:52.856Z,1513267672.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:53.282Z,1513267673.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:53.665Z,1513267673.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:54.119Z,1513267674.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:54.468Z,1513267674.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:54.864Z,1513267674.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:55.275Z,1513267675.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:55.664Z,1513267675.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:56.128Z,1513267676.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:56.476Z,1513267676.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:56.867Z,1513267676.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:57.266Z,1513267677.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:57.676Z,1513267677.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:58.111Z,1513267678.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:58.478Z,1513267678.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:58.864Z,1513267678.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:59.267Z,1513267679.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:07:59.678Z,1513267679.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:00.113Z,1513267680.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:00.456Z,1513267680.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:00.854Z,1513267680.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:01.259Z,1513267681.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:01.667Z,1513267681.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:02.052Z,1513267682.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:02.435Z,1513267682.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:02.873Z,1513267682.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:03.270Z,1513267683.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:03.651Z,1513267683.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:04.045Z,1513267684.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:04.492Z,1513267684.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:04.874Z,1513267684.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:05.259Z,1513267685.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:05.654Z,1513267685.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:06.087Z,1513267686.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:06.512Z,1513267686.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:06.856Z,1513267686.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:07.257Z,1513267687.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:07.660Z,1513267687.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:08.108Z,1513267688.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:08.453Z,1513267688.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:08.859Z,1513267688.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:09.267Z,1513267689.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:09.664Z,1513267689.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:10.107Z,1513267690.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:10.459Z,1513267690.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:10.864Z,1513267690.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:11.274Z,1513267691.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:11.667Z,1513267691.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:12.117Z,1513267692.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:12.504Z,1513267692.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:12.871Z,1513267692.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:13.241Z,1513267693.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:13.668Z,1513267693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:14.111Z,1513267694.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:14.479Z,1513267694.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:14.837Z,1513267694.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:15.247Z,1513267695.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:15.726Z,1513267695.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:16.141Z,1513267696.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:16.473Z,1513267696.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:16.911Z,1513267696.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:17.251Z,1513267697.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:17.651Z,1513267697.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:18.054Z,1513267698.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:18.581Z,1513267698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:18.865Z,1513267698.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:19.264Z,1513267699.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:19.668Z,1513267699.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:20.042Z,1513267700.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:20.515Z,1513267700.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:20.866Z,1513267700.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:21.262Z,1513267701.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:21.663Z,1513267701.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:22.113Z,1513267702.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:22.478Z,1513267702.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:22.877Z,1513267702.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:23.260Z,1513267703.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:23.667Z,1513267703.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:24.116Z,1513267704.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:24.475Z,1513267704.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:24.928Z,1513267704.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:25.246Z,1513267705.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:25.683Z,1513267705.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:26.116Z,1513267706.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:26.467Z,1513267706.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:26.848Z,1513267706.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x16710 got:0x35710
2017-12-14T16:08:26.878Z,1513267706.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:27.266Z,1513267707.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:27.669Z,1513267707.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:28.100Z,1513267708.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:28.457Z,1513267708.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:28.954Z,1513267708.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:29.261Z,1513267709.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:29.666Z,1513267709.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:30.051Z,1513267710.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:30.444Z,1513267710.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:30.861Z,1513267710.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:31.274Z,1513267711.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:31.659Z,1513267711.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:32.086Z,1513267712.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:32.501Z,1513267712.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:32.856Z,1513267712.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:33.262Z,1513267713.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:33.679Z,1513267713.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:34.027Z,1513267714.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:34.504Z,1513267714.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:34.847Z,1513267714.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:35.302Z,1513267715.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:35.673Z,1513267715.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:36.110Z,1513267716.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:36.474Z,1513267716.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:36.865Z,1513267716.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:37.236Z,1513267717.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:37.644Z,1513267717.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:38.119Z,1513267718.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:38.127Z,1513267718.127 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:03:37.9Z
2017-12-14T16:08:38.127Z,1513267718.127 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T16:08:38.127Z,1513267718.127 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T16:08:38.487Z,1513267718.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:39.282Z,1513267719.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:39.427Z,1513267719.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:43.164Z,1513267723.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:43.245Z,1513267723.245 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0360.lzma
2017-12-14T16:08:43.304Z,1513267723.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:43.682Z,1513267723.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:43.992Z,1513267723.992 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0360.lzma.bak
2017-12-14T16:08:43.992Z,1513267723.992 [DataOverHttps](INFO): SBD MOMSN=5439094
2017-12-14T16:08:44.049Z,1513267724.049 [PNI_TCM](ERROR): CRC does not match. Expected:0x6849 got:0x1858
2017-12-14T16:08:44.149Z,1513267724.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:45.324Z,1513267725.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:45.503Z,1513267725.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:48.930Z,1513267728.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:49.071Z,1513267729.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:49.399Z,1513267729.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:49.834Z,1513267729.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:50.205Z,1513267730.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:50.599Z,1513267730.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:54.282Z,1513267734.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:54.362Z,1513267734.362 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0361.lzma
2017-12-14T16:08:54.429Z,1513267734.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:54.763Z,1513267734.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:55.108Z,1513267735.108 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0361.lzma.bak
2017-12-14T16:08:55.108Z,1513267735.108 [DataOverHttps](INFO): SBD MOMSN=5439097
2017-12-14T16:08:55.187Z,1513267735.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:56.486Z,1513267736.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:56.490Z,1513267736.490 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T16:08:56.490Z,1513267736.490 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T16:08:56.490Z,1513267736.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T16:08:56.638Z,1513267736.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:08:59.954Z,1513267739.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:00.068Z,1513267740.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:00.499Z,1513267740.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:00.875Z,1513267740.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:01.261Z,1513267741.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:01.650Z,1513267741.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:02.039Z,1513267742.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:02.479Z,1513267742.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:02.874Z,1513267742.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:03.251Z,1513267743.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:03.646Z,1513267743.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:04.170Z,1513267744.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:04.459Z,1513267744.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:04.840Z,1513267744.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:05.279Z,1513267745.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:05.668Z,1513267745.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:06.100Z,1513267746.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:06.464Z,1513267746.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:06.871Z,1513267746.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:07.315Z,1513267747.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:07.635Z,1513267747.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:08.183Z,1513267748.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:08.443Z,1513267748.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:08.824Z,1513267748.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:09.232Z,1513267749.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:09.640Z,1513267749.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:10.122Z,1513267750.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:10.471Z,1513267750.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:10.825Z,1513267750.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:11.235Z,1513267751.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:11.629Z,1513267751.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:12.032Z,1513267752.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:12.450Z,1513267752.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:12.850Z,1513267752.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:13.247Z,1513267753.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:13.659Z,1513267753.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:14.020Z,1513267754.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:14.498Z,1513267754.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:14.852Z,1513267754.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:15.303Z,1513267755.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:15.651Z,1513267755.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:16.051Z,1513267756.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:16.516Z,1513267756.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:16.878Z,1513267756.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:17.267Z,1513267757.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:17.658Z,1513267757.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:18.087Z,1513267758.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:18.442Z,1513267758.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:18.879Z,1513267758.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:19.225Z,1513267759.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:19.655Z,1513267759.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:20.133Z,1513267760.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:20.439Z,1513267760.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:20.823Z,1513267760.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:21.235Z,1513267761.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:21.632Z,1513267761.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:22.116Z,1513267762.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:22.475Z,1513267762.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:22.835Z,1513267762.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x20966 got:0x7490
2017-12-14T16:09:22.871Z,1513267762.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:23.307Z,1513267763.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:23.635Z,1513267763.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:24.098Z,1513267764.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:24.191Z,1513267764.191 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:09:24.444Z,1513267764.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:24.855Z,1513267764.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:25.251Z,1513267765.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:25.646Z,1513267765.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:26.035Z,1513267766.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:26.478Z,1513267766.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:26.864Z,1513267766.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:27.245Z,1513267767.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:27.647Z,1513267767.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:28.090Z,1513267768.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:28.492Z,1513267768.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:28.846Z,1513267768.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:29.259Z,1513267769.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:29.692Z,1513267769.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:30.071Z,1513267770.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:30.510Z,1513267770.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:30.855Z,1513267770.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:31.243Z,1513267771.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:31.620Z,1513267771.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:32.071Z,1513267772.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:32.443Z,1513267772.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:32.887Z,1513267772.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:33.228Z,1513267773.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:33.628Z,1513267773.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:34.107Z,1513267774.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:34.419Z,1513267774.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:34.816Z,1513267774.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:35.223Z,1513267775.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:35.607Z,1513267775.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:36.096Z,1513267776.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:36.453Z,1513267776.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:36.852Z,1513267776.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:37.216Z,1513267777.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:37.616Z,1513267777.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:38.079Z,1513267778.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:38.454Z,1513267778.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:38.871Z,1513267778.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:39.314Z,1513267779.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:39.687Z,1513267779.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:40.096Z,1513267780.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:40.450Z,1513267780.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:40.832Z,1513267780.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:41.229Z,1513267781.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:41.630Z,1513267781.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:42.037Z,1513267782.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:42.520Z,1513267782.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:42.862Z,1513267782.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:43.231Z,1513267783.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:43.628Z,1513267783.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:09:43.638Z,1513267783.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:44.076Z,1513267784.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:44.422Z,1513267784.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:09:44.480Z,1513267784.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:44.825Z,1513267784.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:09:44.869Z,1513267784.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:45.247Z,1513267785.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:45.687Z,1513267785.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:46.100Z,1513267786.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:46.444Z,1513267786.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:46.836Z,1513267786.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:47.257Z,1513267787.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:47.629Z,1513267787.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:48.107Z,1513267788.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:48.459Z,1513267788.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:48.908Z,1513267788.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:49.231Z,1513267789.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:49.622Z,1513267789.622 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T16:09:49.622Z,1513267789.622 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:09:49.622Z,1513267789.622 [BPC1](ERROR): Data Fault
2017-12-14T16:09:49.636Z,1513267789.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:49.653Z,1513267789.653 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:09:50.109Z,1513267790.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:50.463Z,1513267790.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:50.836Z,1513267790.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:50.878Z,1513267790.878 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:09:50.878Z,1513267790.878 [BPC1] No Fault, FailCount= 1
2017-12-14T16:09:51.287Z,1513267791.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:51.633Z,1513267791.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:52.118Z,1513267792.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:52.460Z,1513267792.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:52.840Z,1513267792.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:53.243Z,1513267793.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:53.661Z,1513267793.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:54.030Z,1513267794.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:54.468Z,1513267794.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:54.849Z,1513267794.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:55.242Z,1513267795.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:55.663Z,1513267795.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:56.057Z,1513267796.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:56.479Z,1513267796.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:56.847Z,1513267796.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:57.228Z,1513267797.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:09:57.610Z,1513267797.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:09:58.430Z,1513267798.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:09:58.833Z,1513267798.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:10:00.762Z,1513267800.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:00.930Z,1513267800.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:01.261Z,1513267801.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:01.683Z,1513267801.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:02.122Z,1513267802.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:02.455Z,1513267802.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:02.855Z,1513267802.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:03.275Z,1513267803.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:03.660Z,1513267803.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:04.100Z,1513267804.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:04.463Z,1513267804.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:04.898Z,1513267804.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:05.267Z,1513267805.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:05.694Z,1513267805.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:06.177Z,1513267806.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:06.471Z,1513267806.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:06.866Z,1513267806.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:07.267Z,1513267807.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:07.663Z,1513267807.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:08.204Z,1513267808.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:08.475Z,1513267808.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:08.858Z,1513267808.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:09.263Z,1513267809.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:09.664Z,1513267809.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:10.076Z,1513267810.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:10.495Z,1513267810.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:10.868Z,1513267810.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:11.267Z,1513267811.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:11.666Z,1513267811.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:12.056Z,1513267812.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:12.454Z,1513267812.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:12.915Z,1513267812.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:13.267Z,1513267813.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:13.679Z,1513267813.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:14.106Z,1513267814.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:14.508Z,1513267814.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:14.862Z,1513267814.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:15.268Z,1513267815.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:15.657Z,1513267815.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:16.103Z,1513267816.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:16.455Z,1513267816.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:16.871Z,1513267816.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:17.263Z,1513267817.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:17.676Z,1513267817.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:18.132Z,1513267818.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:18.467Z,1513267818.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:18.848Z,1513267818.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:19.269Z,1513267819.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:19.656Z,1513267819.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:20.098Z,1513267820.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:20.456Z,1513267820.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:20.888Z,1513267820.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:21.303Z,1513267821.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:21.660Z,1513267821.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:22.087Z,1513267822.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:22.463Z,1513267822.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:22.888Z,1513267822.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:23.267Z,1513267823.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:23.660Z,1513267823.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:24.095Z,1513267824.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:24.466Z,1513267824.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x19950 got:0x42215
2017-12-14T16:10:24.495Z,1513267824.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:24.861Z,1513267824.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:25.261Z,1513267825.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:25.664Z,1513267825.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:26.067Z,1513267826.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:26.533Z,1513267826.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:26.859Z,1513267826.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:27.299Z,1513267827.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:27.660Z,1513267827.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:28.103Z,1513267828.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:28.460Z,1513267828.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:28.863Z,1513267828.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:29.258Z,1513267829.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:29.659Z,1513267829.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:30.110Z,1513267830.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:30.503Z,1513267830.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:30.853Z,1513267830.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:31.253Z,1513267831.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:31.654Z,1513267831.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:32.103Z,1513267832.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:32.459Z,1513267832.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:32.867Z,1513267832.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:33.259Z,1513267833.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:33.691Z,1513267833.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:34.085Z,1513267834.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x51746 got:0x42794
2017-12-14T16:10:34.133Z,1513267834.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:34.482Z,1513267834.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:34.845Z,1513267834.845 [PNI_TCM](ERROR): CRC does not match. Expected:0x56720 got:0x53976
2017-12-14T16:10:34.911Z,1513267834.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:35.267Z,1513267835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:35.683Z,1513267835.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:36.046Z,1513267836.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:36.459Z,1513267836.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:36.894Z,1513267836.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:37.285Z,1513267837.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:37.644Z,1513267837.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x50447 got:0x23324
2017-12-14T16:10:37.671Z,1513267837.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:38.051Z,1513267838.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:38.491Z,1513267838.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:38.863Z,1513267838.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:39.260Z,1513267839.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:39.657Z,1513267839.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:40.070Z,1513267840.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:40.489Z,1513267840.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:40.863Z,1513267840.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:41.243Z,1513267841.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:41.670Z,1513267841.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:42.115Z,1513267842.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:42.446Z,1513267842.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:42.863Z,1513267842.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:43.318Z,1513267843.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:43.667Z,1513267843.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:43.667Z,1513267843.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 312
2017-12-14T16:10:43.667Z,1513267843.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:10:43.669Z,1513267843.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:43.669Z,1513267843.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 312
2017-12-14T16:10:43.669Z,1513267843.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:10:43.671Z,1513267843.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:43.671Z,1513267843.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 312
2017-12-14T16:10:43.671Z,1513267843.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:10:43.683Z,1513267843.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:10:43.684Z,1513267843.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:10:43.684Z,1513267843.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:10:44.139Z,1513267844.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:10:44.139Z,1513267844.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 312
2017-12-14T16:10:44.140Z,1513267844.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:10:44.140Z,1513267844.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 312
2017-12-14T16:10:44.140Z,1513267844.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:10:44.140Z,1513267844.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 312
2017-12-14T16:10:44.453Z,1513267844.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:10:44.454Z,1513267844.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:10:44.454Z,1513267844.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:10:44.454Z,1513267844.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:10:44.455Z,1513267844.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:10:44.455Z,1513267844.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:10:44.455Z,1513267844.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:10:44.456Z,1513267844.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:10:44.456Z,1513267844.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:10:44.879Z,1513267844.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:45.274Z,1513267845.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:45.659Z,1513267845.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:46.106Z,1513267846.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:46.496Z,1513267846.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:46.867Z,1513267846.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:47.267Z,1513267847.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:47.657Z,1513267847.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:48.096Z,1513267848.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:48.458Z,1513267848.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:48.848Z,1513267848.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:49.259Z,1513267849.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:49.688Z,1513267849.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:50.106Z,1513267850.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:50.425Z,1513267850.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:50.854Z,1513267850.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:51.276Z,1513267851.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:51.656Z,1513267851.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:52.054Z,1513267852.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:52.506Z,1513267852.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:52.907Z,1513267852.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:53.264Z,1513267853.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:53.665Z,1513267853.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:54.045Z,1513267854.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:54.488Z,1513267854.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:54.886Z,1513267854.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:55.259Z,1513267855.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:55.658Z,1513267855.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:56.123Z,1513267856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:56.474Z,1513267856.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:56.923Z,1513267856.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:10:57.257Z,1513267857.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:00.796Z,1513267860.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:00.925Z,1513267860.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:01.335Z,1513267861.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:01.693Z,1513267861.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:02.132Z,1513267862.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:02.556Z,1513267862.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:02.910Z,1513267862.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:03.304Z,1513267863.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:03.701Z,1513267863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:04.154Z,1513267864.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:04.503Z,1513267864.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:04.891Z,1513267864.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:05.301Z,1513267865.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:05.735Z,1513267865.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:06.108Z,1513267866.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:06.511Z,1513267866.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:06.903Z,1513267866.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:07.294Z,1513267867.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:07.694Z,1513267867.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:08.135Z,1513267868.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:08.512Z,1513267868.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:08.998Z,1513267868.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:09.307Z,1513267869.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:09.739Z,1513267869.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:10.138Z,1513267870.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:10.496Z,1513267870.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:10.899Z,1513267870.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:11.295Z,1513267871.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:11.694Z,1513267871.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:12.165Z,1513267872.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:12.514Z,1513267872.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:12.903Z,1513267872.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:13.295Z,1513267873.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:13.697Z,1513267873.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:14.126Z,1513267874.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:14.496Z,1513267874.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:14.908Z,1513267874.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:15.324Z,1513267875.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:15.705Z,1513267875.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:16.126Z,1513267876.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:16.500Z,1513267876.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:16.891Z,1513267876.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:17.287Z,1513267877.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:17.695Z,1513267877.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:18.167Z,1513267878.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:18.612Z,1513267878.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:19.008Z,1513267879.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:19.315Z,1513267879.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:19.739Z,1513267879.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:20.111Z,1513267880.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:20.553Z,1513267880.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:20.958Z,1513267880.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:21.311Z,1513267881.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:21.840Z,1513267881.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:22.101Z,1513267882.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:22.524Z,1513267882.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:22.921Z,1513267882.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:23.328Z,1513267883.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:23.711Z,1513267883.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:24.180Z,1513267884.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:24.506Z,1513267884.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:24.906Z,1513267884.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:25.339Z,1513267885.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:25.707Z,1513267885.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:26.166Z,1513267886.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:26.496Z,1513267886.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:26.936Z,1513267886.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:27.310Z,1513267887.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:27.731Z,1513267887.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:28.133Z,1513267888.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:28.519Z,1513267888.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:28.928Z,1513267888.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:29.307Z,1513267889.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:29.713Z,1513267889.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:30.160Z,1513267890.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:30.533Z,1513267890.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:30.895Z,1513267890.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:31.312Z,1513267891.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:31.715Z,1513267891.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:32.188Z,1513267892.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:32.516Z,1513267892.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:32.954Z,1513267892.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:33.327Z,1513267893.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:33.703Z,1513267893.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:34.143Z,1513267894.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:34.554Z,1513267894.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:34.904Z,1513267894.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:35.382Z,1513267895.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:35.718Z,1513267895.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:36.145Z,1513267896.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:36.523Z,1513267896.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:36.951Z,1513267896.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:37.300Z,1513267897.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:37.716Z,1513267897.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:38.112Z,1513267898.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:38.503Z,1513267898.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:38.926Z,1513267898.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:39.349Z,1513267899.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:39.715Z,1513267899.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:40.119Z,1513267900.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:40.528Z,1513267900.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:40.918Z,1513267900.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:41.299Z,1513267901.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:41.749Z,1513267901.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:42.150Z,1513267902.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:42.543Z,1513267902.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:42.919Z,1513267902.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:43.296Z,1513267903.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:43.799Z,1513267903.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:44.157Z,1513267904.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:44.511Z,1513267904.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:45.030Z,1513267905.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:45.311Z,1513267905.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:45.764Z,1513267905.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:46.161Z,1513267906.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:46.507Z,1513267906.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:46.899Z,1513267906.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:47.319Z,1513267907.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:47.703Z,1513267907.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:48.171Z,1513267908.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:48.552Z,1513267908.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:48.917Z,1513267908.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:49.315Z,1513267909.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:49.709Z,1513267909.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:50.108Z,1513267910.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:50.569Z,1513267910.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:50.915Z,1513267910.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:51.318Z,1513267911.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:51.695Z,1513267911.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:52.128Z,1513267912.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:52.495Z,1513267912.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:52.888Z,1513267912.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:53.287Z,1513267913.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:53.689Z,1513267913.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:54.178Z,1513267914.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:54.520Z,1513267914.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:54.904Z,1513267914.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:55.291Z,1513267915.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:55.690Z,1513267915.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:56.124Z,1513267916.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:56.499Z,1513267916.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:56.921Z,1513267916.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:11:57.304Z,1513267917.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:00.804Z,1513267920.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:00.956Z,1513267920.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:01.349Z,1513267921.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:01.741Z,1513267921.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:02.139Z,1513267922.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:02.541Z,1513267922.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:02.952Z,1513267922.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:03.350Z,1513267923.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:03.754Z,1513267923.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:04.144Z,1513267924.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:04.539Z,1513267924.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:04.946Z,1513267924.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:05.352Z,1513267925.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:05.748Z,1513267925.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:06.221Z,1513267926.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:06.563Z,1513267926.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:06.960Z,1513267926.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:07.422Z,1513267927.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:07.759Z,1513267927.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:08.178Z,1513267928.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:08.543Z,1513267928.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:08.969Z,1513267928.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:09.336Z,1513267929.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:09.747Z,1513267929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:10.152Z,1513267930.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:10.587Z,1513267930.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:10.936Z,1513267930.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:11.336Z,1513267931.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:11.742Z,1513267931.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:12.152Z,1513267932.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:12.567Z,1513267932.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:12.955Z,1513267932.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:13.347Z,1513267933.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:13.803Z,1513267933.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:14.192Z,1513267934.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:14.555Z,1513267934.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:14.959Z,1513267934.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:15.359Z,1513267935.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:15.759Z,1513267935.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:16.151Z,1513267936.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:16.567Z,1513267936.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:17.010Z,1513267937.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:17.458Z,1513267937.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:17.728Z,1513267937.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:18.156Z,1513267938.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:18.553Z,1513267938.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:18.952Z,1513267938.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:19.347Z,1513267939.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:19.743Z,1513267939.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:20.194Z,1513267940.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:20.539Z,1513267940.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:20.965Z,1513267940.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:21.351Z,1513267941.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:21.744Z,1513267941.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:22.142Z,1513267942.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:22.543Z,1513267942.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:22.939Z,1513267942.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:23.374Z,1513267943.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:23.743Z,1513267943.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:24.152Z,1513267944.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:24.556Z,1513267944.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:24.952Z,1513267944.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:25.338Z,1513267945.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:25.738Z,1513267945.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:26.141Z,1513267946.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:26.559Z,1513267946.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:26.966Z,1513267946.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:27.354Z,1513267947.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:27.848Z,1513267947.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:28.168Z,1513267948.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:28.532Z,1513267948.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:28.983Z,1513267948.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:29.342Z,1513267949.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:29.791Z,1513267949.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:30.159Z,1513267950.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:30.647Z,1513267950.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:30.952Z,1513267950.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:31.339Z,1513267951.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:31.740Z,1513267951.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:32.141Z,1513267952.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:32.534Z,1513267952.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:32.987Z,1513267952.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:33.348Z,1513267953.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:33.754Z,1513267953.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:34.139Z,1513267954.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:34.541Z,1513267954.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:34.939Z,1513267954.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:35.347Z,1513267955.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:35.740Z,1513267955.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:36.210Z,1513267956.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:36.554Z,1513267956.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:36.955Z,1513267956.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:37.340Z,1513267957.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:37.740Z,1513267957.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:38.140Z,1513267958.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:38.551Z,1513267958.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:39.084Z,1513267959.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:39.395Z,1513267959.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:39.749Z,1513267959.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:40.143Z,1513267960.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:40.546Z,1513267960.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:40.931Z,1513267960.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:41.335Z,1513267961.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:41.736Z,1513267961.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:42.179Z,1513267962.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:42.581Z,1513267962.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:42.959Z,1513267962.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:43.329Z,1513267963.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:43.734Z,1513267963.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:44.136Z,1513267964.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:44.559Z,1513267964.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:44.964Z,1513267964.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:45.359Z,1513267965.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:45.815Z,1513267965.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:46.132Z,1513267966.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:46.549Z,1513267966.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:46.934Z,1513267966.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:47.337Z,1513267967.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:47.737Z,1513267967.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:48.158Z,1513267968.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:48.558Z,1513267968.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:48.989Z,1513267968.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:49.378Z,1513267969.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:49.736Z,1513267969.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:50.139Z,1513267970.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:50.538Z,1513267970.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:50.951Z,1513267970.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:51.398Z,1513267971.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:51.748Z,1513267971.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:52.229Z,1513267972.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:52.555Z,1513267972.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:52.978Z,1513267972.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:53.338Z,1513267973.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:53.738Z,1513267973.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:54.153Z,1513267974.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:54.551Z,1513267974.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:54.955Z,1513267974.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:55.389Z,1513267975.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:55.744Z,1513267975.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:56.180Z,1513267976.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:56.542Z,1513267976.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:56.953Z,1513267976.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:12:57.349Z,1513267977.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:00.840Z,1513267980.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:00.967Z,1513267980.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:01.359Z,1513267981.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:01.746Z,1513267981.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:02.150Z,1513267982.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:02.540Z,1513267982.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:02.947Z,1513267982.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:03.344Z,1513267983.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:03.746Z,1513267983.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:04.151Z,1513267984.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:04.517Z,1513267984.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:05.010Z,1513267985.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:05.325Z,1513267985.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:05.722Z,1513267985.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:06.139Z,1513267986.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:06.534Z,1513267986.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:06.984Z,1513267986.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:07.327Z,1513267987.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:07.719Z,1513267987.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:08.124Z,1513267988.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:08.531Z,1513267988.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:08.943Z,1513267988.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:09.343Z,1513267989.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:09.747Z,1513267989.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:10.195Z,1513267990.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:10.526Z,1513267990.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:10.927Z,1513267990.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:11.327Z,1513267991.327 [BPC1](ERROR): Failed to parse message.
2017-12-14T16:13:11.327Z,1513267991.327 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T16:13:11.327Z,1513267991.327 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:13:11.327Z,1513267991.327 [BPC1](ERROR): Data Fault
2017-12-14T16:13:11.343Z,1513267991.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:11.390Z,1513267991.390 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:13:11.730Z,1513267991.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:12.133Z,1513267992.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:12.539Z,1513267992.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:12.553Z,1513267992.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:13:12.553Z,1513267992.553 [BPC1] No Fault, FailCount= 1
2017-12-14T16:13:12.983Z,1513267992.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:13.330Z,1513267993.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:13.731Z,1513267993.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:14.134Z,1513267994.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:14.555Z,1513267994.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:14.936Z,1513267994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:15.339Z,1513267995.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:15.739Z,1513267995.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:16.140Z,1513267996.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:16.515Z,1513267996.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:16.939Z,1513267996.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:17.318Z,1513267997.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:17.771Z,1513267997.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:18.147Z,1513267998.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:18.547Z,1513267998.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:18.941Z,1513267998.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:19.320Z,1513267999.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:19.714Z,1513267999.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:20.143Z,1513268000.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:20.524Z,1513268000.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:20.975Z,1513268000.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:21.359Z,1513268001.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:21.724Z,1513268001.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:22.149Z,1513268002.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:22.517Z,1513268002.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:22.920Z,1513268002.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:23.320Z,1513268003.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:23.719Z,1513268003.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:24.283Z,1513268004.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:24.546Z,1513268004.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:24.943Z,1513268004.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:25.317Z,1513268005.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:25.743Z,1513268005.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:26.115Z,1513268006.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:26.520Z,1513268006.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:26.941Z,1513268006.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:27.331Z,1513268007.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:27.731Z,1513268007.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:28.120Z,1513268008.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:28.521Z,1513268008.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:28.924Z,1513268008.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:29.323Z,1513268009.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:29.731Z,1513268009.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:30.153Z,1513268010.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:30.527Z,1513268010.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:30.951Z,1513268010.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:31.330Z,1513268011.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:31.722Z,1513268011.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:32.167Z,1513268012.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:32.523Z,1513268012.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:32.946Z,1513268012.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:33.370Z,1513268013.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:33.766Z,1513268013.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:34.151Z,1513268014.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:34.550Z,1513268014.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:34.929Z,1513268014.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:35.358Z,1513268015.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:35.718Z,1513268015.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:36.151Z,1513268016.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:36.528Z,1513268016.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:36.987Z,1513268016.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:37.334Z,1513268017.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:37.731Z,1513268017.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:38.182Z,1513268018.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:38.532Z,1513268018.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:38.938Z,1513268018.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:39.339Z,1513268019.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:39.736Z,1513268019.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:40.147Z,1513268020.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:40.534Z,1513268020.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:40.919Z,1513268020.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:41.331Z,1513268021.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:41.738Z,1513268021.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:42.138Z,1513268022.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:42.540Z,1513268022.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:42.936Z,1513268022.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:43.431Z,1513268023.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:43.733Z,1513268023.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:44.134Z,1513268024.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:44.511Z,1513268024.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:44.511Z,1513268024.511 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 313
2017-12-14T16:13:44.511Z,1513268024.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:13:44.529Z,1513268024.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:44.529Z,1513268024.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 313
2017-12-14T16:13:44.529Z,1513268024.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:13:44.531Z,1513268024.531 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:44.531Z,1513268024.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 313
2017-12-14T16:13:44.531Z,1513268024.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:13:44.548Z,1513268024.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:13:44.548Z,1513268024.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:13:44.554Z,1513268024.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:13:44.954Z,1513268024.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:13:44.954Z,1513268024.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 313
2017-12-14T16:13:44.955Z,1513268024.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:13:44.955Z,1513268024.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 313
2017-12-14T16:13:44.955Z,1513268024.955 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:13:44.955Z,1513268024.955 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 313
2017-12-14T16:13:45.335Z,1513268025.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:13:45.335Z,1513268025.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:13:45.336Z,1513268025.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:13:45.336Z,1513268025.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:13:45.336Z,1513268025.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:13:45.337Z,1513268025.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:13:45.337Z,1513268025.337 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:13:45.337Z,1513268025.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:13:45.338Z,1513268025.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:13:45.742Z,1513268025.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:46.140Z,1513268026.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:46.541Z,1513268026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:46.943Z,1513268026.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:47.369Z,1513268027.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:47.719Z,1513268027.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:48.145Z,1513268028.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:48.540Z,1513268028.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:48.928Z,1513268028.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:49.318Z,1513268029.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:49.727Z,1513268029.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:50.150Z,1513268030.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:50.519Z,1513268030.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:50.929Z,1513268030.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:51.335Z,1513268031.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:51.735Z,1513268031.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:52.184Z,1513268032.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:52.526Z,1513268032.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:52.927Z,1513268032.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:53.320Z,1513268033.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:53.779Z,1513268033.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:54.179Z,1513268034.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:54.536Z,1513268034.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:54.939Z,1513268034.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:55.344Z,1513268035.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:55.731Z,1513268035.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:56.123Z,1513268036.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:56.569Z,1513268036.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:56.949Z,1513268036.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:56.961Z,1513268036.961 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:13:56.961Z,1513268036.961 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:13:56.961Z,1513268036.961 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:13:56.961Z,1513268036.961 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:13:57.360Z,1513268037.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:57.380Z,1513268037.380 [Default:CheckIn:D] Stopped
2017-12-14T16:13:57.380Z,1513268037.380 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:13:57.743Z,1513268037.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:13:57.746Z,1513268037.746 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 940.699870 min 
2017-12-14T16:13:57.746Z,1513268037.746 [Default:CheckIn:E] Stopped
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn] Stopped
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn](INFO): Running loop #91
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn] Running Loop=91
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:13:57.747Z,1513268037.747 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:14:01.238Z,1513268041.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:01.381Z,1513268041.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:01.731Z,1513268041.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:02.140Z,1513268042.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:02.532Z,1513268042.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:02.911Z,1513268042.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:03.348Z,1513268043.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:03.705Z,1513268043.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:04.141Z,1513268044.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:04.513Z,1513268044.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:04.933Z,1513268044.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:05.308Z,1513268045.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:05.732Z,1513268045.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:06.186Z,1513268046.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:06.549Z,1513268046.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:06.920Z,1513268046.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:07.331Z,1513268047.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:07.727Z,1513268047.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:08.114Z,1513268048.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:08.522Z,1513268048.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:08.918Z,1513268048.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:09.319Z,1513268049.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:09.744Z,1513268049.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:10.135Z,1513268050.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:10.543Z,1513268050.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:10.924Z,1513268050.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:11.317Z,1513268051.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:11.727Z,1513268051.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:12.159Z,1513268052.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:12.519Z,1513268052.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:13.020Z,1513268053.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:13.327Z,1513268053.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:13.724Z,1513268053.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:14.128Z,1513268054.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:14.523Z,1513268054.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:14.912Z,1513268054.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:15.306Z,1513268055.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:15.707Z,1513268055.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:16.159Z,1513268056.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:16.537Z,1513268056.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:16.911Z,1513268056.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:17.306Z,1513268057.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:17.755Z,1513268057.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:18.137Z,1513268058.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:18.551Z,1513268058.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:18.935Z,1513268058.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:19.363Z,1513268059.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:19.736Z,1513268059.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:20.222Z,1513268060.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:20.515Z,1513268060.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:20.919Z,1513268060.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:21.311Z,1513268061.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:21.715Z,1513268061.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:22.116Z,1513268062.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:22.574Z,1513268062.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:22.922Z,1513268062.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:23.323Z,1513268063.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:23.715Z,1513268063.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:24.115Z,1513268064.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:24.512Z,1513268064.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:24.930Z,1513268064.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:25.325Z,1513268065.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:25.727Z,1513268065.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:26.134Z,1513268066.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:26.532Z,1513268066.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:26.903Z,1513268066.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:27.301Z,1513268067.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:27.747Z,1513268067.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:28.141Z,1513268068.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:28.526Z,1513268068.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:28.947Z,1513268068.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:29.305Z,1513268069.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:29.795Z,1513268069.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:30.136Z,1513268070.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:30.504Z,1513268070.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:30.927Z,1513268070.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:31.325Z,1513268071.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:31.735Z,1513268071.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:32.140Z,1513268072.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:32.508Z,1513268072.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:32.944Z,1513268072.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:33.334Z,1513268073.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:33.704Z,1513268073.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:34.171Z,1513268074.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:34.530Z,1513268074.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:34.930Z,1513268074.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:35.304Z,1513268075.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:35.708Z,1513268075.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:36.152Z,1513268076.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:36.516Z,1513268076.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:36.941Z,1513268076.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:37.316Z,1513268077.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:37.741Z,1513268077.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:38.115Z,1513268078.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:38.554Z,1513268078.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:38.910Z,1513268078.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:39.366Z,1513268079.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:39.752Z,1513268079.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:40.126Z,1513268080.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:40.523Z,1513268080.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:40.921Z,1513268080.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:41.347Z,1513268081.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:41.712Z,1513268081.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:42.156Z,1513268082.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:42.567Z,1513268082.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:42.923Z,1513268082.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:43.331Z,1513268083.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:43.720Z,1513268083.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:44.128Z,1513268084.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:44.511Z,1513268084.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:44.914Z,1513268084.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:45.315Z,1513268085.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:45.725Z,1513268085.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:46.127Z,1513268086.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:46.524Z,1513268086.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:46.919Z,1513268086.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:47.323Z,1513268087.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:47.719Z,1513268087.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:48.167Z,1513268088.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:48.519Z,1513268088.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:48.964Z,1513268088.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:49.312Z,1513268089.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:49.671Z,1513268089.671 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T16:14:49.671Z,1513268089.671 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T16:14:49.671Z,1513268089.671 [DropWeight](ERROR): Hardware Fault
2017-12-14T16:14:49.739Z,1513268089.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:49.750Z,1513268089.750 [CBIT](INFO): Critical error at 20171214T161449
2017-12-14T16:14:49.752Z,1513268089.752 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T16:14:49.752Z,1513268089.752 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T16:14:50.108Z,1513268090.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:50.120Z,1513268090.120 [CBIT](INFO): Critical error at 20171214T161449
2017-12-14T16:14:50.546Z,1513268090.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:50.915Z,1513268090.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:51.313Z,1513268091.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:51.715Z,1513268091.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:52.113Z,1513268092.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:52.527Z,1513268092.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:52.921Z,1513268092.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:53.314Z,1513268093.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:53.712Z,1513268093.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:54.176Z,1513268094.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:54.519Z,1513268094.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:54.924Z,1513268094.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:55.423Z,1513268095.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:55.735Z,1513268095.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:56.129Z,1513268096.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:56.521Z,1513268096.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:56.925Z,1513268096.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:57.312Z,1513268097.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:57.704Z,1513268097.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:14:58.133Z,1513268098.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:01.650Z,1513268101.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:01.800Z,1513268101.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:02.179Z,1513268102.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:02.593Z,1513268102.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:02.951Z,1513268102.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:03.342Z,1513268103.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:03.779Z,1513268103.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:04.156Z,1513268104.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:04.600Z,1513268104.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:04.955Z,1513268104.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:05.427Z,1513268105.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:05.748Z,1513268105.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:06.143Z,1513268106.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:06.552Z,1513268106.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:06.952Z,1513268106.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:07.355Z,1513268107.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:07.755Z,1513268107.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:08.141Z,1513268108.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:08.553Z,1513268108.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:08.944Z,1513268108.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:09.342Z,1513268109.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:09.746Z,1513268109.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:10.151Z,1513268110.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:10.560Z,1513268110.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:10.956Z,1513268110.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:11.347Z,1513268111.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:11.798Z,1513268111.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:12.145Z,1513268112.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:12.551Z,1513268112.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:12.994Z,1513268112.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:13.360Z,1513268113.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:13.760Z,1513268113.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:14.154Z,1513268114.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:14.559Z,1513268114.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:14.997Z,1513268114.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:15.349Z,1513268115.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:15.753Z,1513268115.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:16.199Z,1513268116.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:16.559Z,1513268116.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:16.963Z,1513268116.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:17.351Z,1513268117.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:17.749Z,1513268117.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:18.204Z,1513268118.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:18.555Z,1513268118.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:18.955Z,1513268118.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:19.360Z,1513268119.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:19.756Z,1513268119.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:20.151Z,1513268120.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:20.556Z,1513268120.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:20.954Z,1513268120.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:21.397Z,1513268121.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:21.734Z,1513268121.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:22.168Z,1513268122.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:22.569Z,1513268122.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:22.965Z,1513268122.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:23.344Z,1513268123.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:23.744Z,1513268123.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:24.147Z,1513268124.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:24.545Z,1513268124.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:25.005Z,1513268125.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:25.352Z,1513268125.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:25.779Z,1513268125.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:26.155Z,1513268126.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:26.665Z,1513268126.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:26.946Z,1513268126.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:27.344Z,1513268127.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:27.747Z,1513268127.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:28.147Z,1513268128.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:28.555Z,1513268128.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:28.948Z,1513268128.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:29.346Z,1513268129.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:29.744Z,1513268129.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:30.185Z,1513268130.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:30.543Z,1513268130.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:30.947Z,1513268130.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:31.375Z,1513268131.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:31.744Z,1513268131.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:32.145Z,1513268132.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:32.543Z,1513268132.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:32.946Z,1513268132.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:33.347Z,1513268133.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:33.746Z,1513268133.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:34.170Z,1513268134.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:34.611Z,1513268134.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:34.987Z,1513268134.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:35.355Z,1513268135.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:35.749Z,1513268135.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:36.148Z,1513268136.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:36.547Z,1513268136.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:36.967Z,1513268136.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:37.360Z,1513268137.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:37.784Z,1513268137.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:38.162Z,1513268138.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:38.562Z,1513268138.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:38.961Z,1513268138.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:39.338Z,1513268139.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:39.734Z,1513268139.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:40.144Z,1513268140.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:40.570Z,1513268140.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:40.995Z,1513268140.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:41.343Z,1513268141.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:41.740Z,1513268141.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:42.141Z,1513268142.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:42.567Z,1513268142.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:42.964Z,1513268142.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:43.365Z,1513268143.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:43.831Z,1513268143.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:44.219Z,1513268144.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:44.569Z,1513268144.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:44.948Z,1513268144.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:45.343Z,1513268145.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:45.743Z,1513268145.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:46.215Z,1513268146.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:46.583Z,1513268146.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:46.948Z,1513268146.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:47.379Z,1513268147.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:47.781Z,1513268147.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:48.146Z,1513268148.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:48.586Z,1513268148.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:48.955Z,1513268148.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:49.352Z,1513268149.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:49.762Z,1513268149.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:50.155Z,1513268150.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:50.602Z,1513268150.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:50.947Z,1513268150.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:51.343Z,1513268151.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:51.744Z,1513268151.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:52.155Z,1513268152.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:52.565Z,1513268152.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:52.963Z,1513268152.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:53.351Z,1513268153.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:53.812Z,1513268153.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:54.135Z,1513268154.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:54.567Z,1513268154.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:54.964Z,1513268154.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:55.351Z,1513268155.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:55.752Z,1513268155.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:56.149Z,1513268156.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:56.545Z,1513268156.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:57.031Z,1513268157.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:57.344Z,1513268157.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:57.748Z,1513268157.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:15:58.189Z,1513268158.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:01.680Z,1513268161.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:01.827Z,1513268161.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:02.152Z,1513268162.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:02.551Z,1513268162.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:02.952Z,1513268162.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:03.395Z,1513268163.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:03.751Z,1513268163.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:04.177Z,1513268164.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:04.556Z,1513268164.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:04.952Z,1513268164.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:05.371Z,1513268165.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:05.764Z,1513268165.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:06.142Z,1513268166.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:06.572Z,1513268166.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:06.979Z,1513268166.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:07.372Z,1513268167.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:07.775Z,1513268167.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:08.172Z,1513268168.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:08.550Z,1513268168.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:08.994Z,1513268168.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:09.407Z,1513268169.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:09.806Z,1513268169.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:10.194Z,1513268170.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:10.567Z,1513268170.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:10.999Z,1513268170.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:11.353Z,1513268171.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:11.759Z,1513268171.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:12.184Z,1513268172.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:12.560Z,1513268172.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:13.007Z,1513268173.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:13.371Z,1513268173.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:13.764Z,1513268173.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:14.153Z,1513268174.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:14.559Z,1513268174.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:14.953Z,1513268174.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:15.359Z,1513268175.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:15.752Z,1513268175.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:16.226Z,1513268176.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:16.575Z,1513268176.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:16.977Z,1513268176.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:17.359Z,1513268177.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:17.779Z,1513268177.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:18.189Z,1513268178.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:18.571Z,1513268178.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:18.983Z,1513268178.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:19.436Z,1513268179.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:19.780Z,1513268179.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:20.183Z,1513268180.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:20.584Z,1513268180.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:20.978Z,1513268180.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:21.380Z,1513268181.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:21.759Z,1513268181.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:22.179Z,1513268182.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:22.558Z,1513268182.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:22.982Z,1513268182.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:23.382Z,1513268183.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:23.772Z,1513268183.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:24.199Z,1513268184.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:24.598Z,1513268184.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:25.006Z,1513268185.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:25.371Z,1513268185.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:25.770Z,1513268185.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:26.216Z,1513268186.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:26.575Z,1513268186.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:26.971Z,1513268186.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:27.381Z,1513268187.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:27.779Z,1513268187.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:28.175Z,1513268188.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:28.580Z,1513268188.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:28.980Z,1513268188.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:29.375Z,1513268189.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:29.757Z,1513268189.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:30.164Z,1513268190.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:30.608Z,1513268190.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:30.968Z,1513268190.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:31.365Z,1513268191.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:31.830Z,1513268191.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:32.206Z,1513268192.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:32.582Z,1513268192.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:32.956Z,1513268192.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:33.394Z,1513268193.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:33.785Z,1513268193.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:34.216Z,1513268194.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:34.603Z,1513268194.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:34.971Z,1513268194.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:35.364Z,1513268195.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:35.807Z,1513268195.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:36.171Z,1513268196.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:36.631Z,1513268196.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:36.980Z,1513268196.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:37.390Z,1513268197.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:37.788Z,1513268197.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:38.224Z,1513268198.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:38.577Z,1513268198.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:38.972Z,1513268198.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:39.387Z,1513268199.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:39.825Z,1513268199.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:40.193Z,1513268200.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:40.584Z,1513268200.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:41.001Z,1513268201.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:41.359Z,1513268201.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:41.751Z,1513268201.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:42.159Z,1513268202.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:42.586Z,1513268202.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:42.996Z,1513268202.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:43.379Z,1513268203.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:43.779Z,1513268203.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:44.173Z,1513268204.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:44.558Z,1513268204.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:44.948Z,1513268204.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:45.378Z,1513268205.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:45.378Z,1513268205.378 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 314
2017-12-14T16:16:45.378Z,1513268205.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:16:45.380Z,1513268205.380 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:45.380Z,1513268205.380 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 314
2017-12-14T16:16:45.380Z,1513268205.380 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:16:45.382Z,1513268205.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:45.382Z,1513268205.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 314
2017-12-14T16:16:45.382Z,1513268205.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:16:45.395Z,1513268205.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:16:45.395Z,1513268205.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:16:45.395Z,1513268205.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:16:45.760Z,1513268205.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:16:45.760Z,1513268205.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 314
2017-12-14T16:16:45.785Z,1513268205.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:16:45.785Z,1513268205.785 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 314
2017-12-14T16:16:45.785Z,1513268205.785 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:16:45.785Z,1513268205.785 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 314
2017-12-14T16:16:46.194Z,1513268206.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:16:46.194Z,1513268206.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:16:46.195Z,1513268206.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:16:46.195Z,1513268206.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:16:46.196Z,1513268206.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:16:46.196Z,1513268206.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:16:46.196Z,1513268206.196 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:16:46.201Z,1513268206.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:16:46.201Z,1513268206.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:16:46.560Z,1513268206.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:46.959Z,1513268206.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:47.360Z,1513268207.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:47.751Z,1513268207.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:48.152Z,1513268208.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:48.552Z,1513268208.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:49.042Z,1513268209.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:49.419Z,1513268209.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:49.790Z,1513268209.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:50.167Z,1513268210.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:50.562Z,1513268210.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:50.950Z,1513268210.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:51.352Z,1513268211.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:51.759Z,1513268211.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:52.167Z,1513268212.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:52.591Z,1513268212.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:52.967Z,1513268212.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:53.351Z,1513268213.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:53.751Z,1513268213.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:54.192Z,1513268214.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:54.599Z,1513268214.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:55.003Z,1513268215.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:55.376Z,1513268215.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:55.843Z,1513268215.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:56.153Z,1513268216.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:56.587Z,1513268216.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:56.951Z,1513268216.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:57.350Z,1513268217.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:57.750Z,1513268217.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:16:58.183Z,1513268218.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:03.451Z,1513268223.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:03.611Z,1513268223.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:03.951Z,1513268223.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:04.358Z,1513268224.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:04.786Z,1513268224.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:05.155Z,1513268225.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:05.563Z,1513268225.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:05.966Z,1513268225.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:06.355Z,1513268226.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:06.746Z,1513268226.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:07.179Z,1513268227.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:07.560Z,1513268227.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:07.958Z,1513268227.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:08.357Z,1513268228.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:08.804Z,1513268228.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:09.135Z,1513268229.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:09.564Z,1513268229.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:09.975Z,1513268229.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:10.483Z,1513268230.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:10.751Z,1513268230.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:11.148Z,1513268231.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:11.550Z,1513268231.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:11.960Z,1513268231.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:12.424Z,1513268232.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:12.766Z,1513268232.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:13.175Z,1513268233.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:13.573Z,1513268233.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:14.010Z,1513268234.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:14.371Z,1513268234.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:14.784Z,1513268234.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:15.157Z,1513268235.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:15.692Z,1513268235.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:15.978Z,1513268235.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:16.372Z,1513268236.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:16.800Z,1513268236.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:17.155Z,1513268237.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:17.579Z,1513268237.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:17.981Z,1513268237.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:18.371Z,1513268238.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:18.810Z,1513268238.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:19.160Z,1513268239.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:19.568Z,1513268239.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:19.936Z,1513268239.936 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:17:19.936Z,1513268239.936 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:17:19.936Z,1513268239.936 [BPC1](ERROR): Communications Fault
2017-12-14T16:17:19.988Z,1513268239.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:20.088Z,1513268240.088 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:17:20.402Z,1513268240.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:20.804Z,1513268240.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:21.273Z,1513268241.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:21.286Z,1513268241.286 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:17:21.286Z,1513268241.286 [BPC1] No Fault, FailCount= 1
2017-12-14T16:17:21.628Z,1513268241.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:21.955Z,1513268241.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:22.356Z,1513268242.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:22.739Z,1513268242.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:23.167Z,1513268243.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:23.564Z,1513268243.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:23.960Z,1513268243.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:24.394Z,1513268244.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:24.787Z,1513268244.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:25.146Z,1513268245.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:25.541Z,1513268245.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:25.952Z,1513268245.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:26.424Z,1513268246.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:26.753Z,1513268246.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:27.146Z,1513268247.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:27.552Z,1513268247.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:27.957Z,1513268247.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:28.355Z,1513268248.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:28.749Z,1513268248.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:29.161Z,1513268249.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:29.561Z,1513268249.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:30.015Z,1513268250.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:30.356Z,1513268250.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:30.756Z,1513268250.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:31.151Z,1513268251.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:31.555Z,1513268251.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:32.075Z,1513268252.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:32.360Z,1513268252.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:32.764Z,1513268252.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:33.137Z,1513268253.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:33.539Z,1513268253.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:33.947Z,1513268253.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:34.355Z,1513268254.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:34.740Z,1513268254.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:35.164Z,1513268255.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:35.506Z,1513268255.506 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T16:17:35.506Z,1513268255.506 [NAL9602] Data Fault, FailCount= 1
2017-12-14T16:17:35.506Z,1513268255.506 [NAL9602](ERROR): Data Fault
2017-12-14T16:17:35.558Z,1513268255.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:35.599Z,1513268255.599 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T16:17:35.906Z,1513268255.906 [NAL9602](INFO): Powering down
2017-12-14T16:17:35.953Z,1513268255.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:36.343Z,1513268256.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:36.747Z,1513268256.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:36.760Z,1513268256.760 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T16:17:36.760Z,1513268256.760 [NAL9602] No Fault, FailCount= 1
2017-12-14T16:17:37.184Z,1513268257.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:37.551Z,1513268257.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:37.944Z,1513268257.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:38.396Z,1513268258.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:38.754Z,1513268258.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:39.132Z,1513268259.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:39.553Z,1513268259.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:39.962Z,1513268259.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:40.471Z,1513268260.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:40.775Z,1513268260.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:41.155Z,1513268261.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:41.558Z,1513268261.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:41.970Z,1513268261.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:42.364Z,1513268262.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:42.763Z,1513268262.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:43.141Z,1513268263.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:43.543Z,1513268263.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:43.943Z,1513268263.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:44.342Z,1513268264.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:44.748Z,1513268264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:45.142Z,1513268265.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:45.547Z,1513268265.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:45.951Z,1513268265.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:46.356Z,1513268266.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:46.784Z,1513268266.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:47.140Z,1513268267.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:47.540Z,1513268267.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:47.931Z,1513268267.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:48.343Z,1513268268.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:48.747Z,1513268268.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:49.152Z,1513268269.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:49.540Z,1513268269.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:49.986Z,1513268269.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:50.339Z,1513268270.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:50.759Z,1513268270.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:51.165Z,1513268271.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:51.539Z,1513268271.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:51.947Z,1513268271.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:52.387Z,1513268272.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:52.747Z,1513268272.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:53.140Z,1513268273.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:53.544Z,1513268273.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:53.940Z,1513268273.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:54.341Z,1513268274.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:54.744Z,1513268274.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:55.150Z,1513268275.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:55.543Z,1513268275.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:55.947Z,1513268275.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:56.387Z,1513268276.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:56.747Z,1513268276.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:57.139Z,1513268277.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:57.546Z,1513268277.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:57.946Z,1513268277.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:17:58.352Z,1513268278.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:01.791Z,1513268281.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:01.934Z,1513268281.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:02.292Z,1513268282.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:02.682Z,1513268282.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:03.123Z,1513268283.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:03.497Z,1513268283.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:03.915Z,1513268283.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:04.272Z,1513268284.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:04.703Z,1513268284.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:05.072Z,1513268285.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:05.499Z,1513268285.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:05.962Z,1513268285.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:06.243Z,1513268286.243 [NAL9602](INFO): Powering up NAL9602
2017-12-14T16:18:06.276Z,1513268286.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:06.679Z,1513268286.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:07.074Z,1513268287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:07.477Z,1513268287.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:07.878Z,1513268287.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:08.275Z,1513268288.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:08.681Z,1513268288.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:09.115Z,1513268289.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:09.476Z,1513268289.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:09.605Z,1513268289.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:09.882Z,1513268289.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:10.283Z,1513268290.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:10.403Z,1513268290.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:10.682Z,1513268290.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:10.805Z,1513268290.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:11.078Z,1513268291.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:11.485Z,1513268291.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:11.604Z,1513268291.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:11.877Z,1513268291.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:12.323Z,1513268292.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:12.398Z,1513268292.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:12.684Z,1513268292.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:12.801Z,1513268292.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:13.119Z,1513268293.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:13.485Z,1513268293.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:13.598Z,1513268293.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:13.887Z,1513268293.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:14.292Z,1513268294.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:14.393Z,1513268294.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:14.687Z,1513268294.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:14.797Z,1513268294.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:15.088Z,1513268295.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:15.536Z,1513268295.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:15.594Z,1513268295.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:15.887Z,1513268295.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:16.290Z,1513268296.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:16.390Z,1513268296.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:16.690Z,1513268296.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:16.793Z,1513268296.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:17.097Z,1513268297.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:17.438Z,1513268297.438 [NAL9602](INFO): NAL9602 initialized
2017-12-14T16:18:17.478Z,1513268297.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:17.590Z,1513268297.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:17.895Z,1513268297.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:18.296Z,1513268298.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:18.385Z,1513268298.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:18.719Z,1513268298.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:18.790Z,1513268298.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:19.080Z,1513268299.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:19.474Z,1513268299.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:19.879Z,1513268299.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:20.280Z,1513268300.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:20.709Z,1513268300.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:21.096Z,1513268301.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:21.492Z,1513268301.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:21.586Z,1513268301.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:21.929Z,1513268301.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:22.285Z,1513268302.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:22.383Z,1513268302.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:22.683Z,1513268302.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:22.805Z,1513268302.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:23.079Z,1513268303.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:23.499Z,1513268303.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:23.602Z,1513268303.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:23.896Z,1513268303.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:24.296Z,1513268304.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:24.397Z,1513268304.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:24.699Z,1513268304.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:24.801Z,1513268304.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:25.111Z,1513268305.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:25.504Z,1513268305.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:25.598Z,1513268305.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:25.882Z,1513268305.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:26.307Z,1513268306.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:26.394Z,1513268306.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:26.696Z,1513268306.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:26.797Z,1513268306.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:27.119Z,1513268307.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:27.490Z,1513268307.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:27.593Z,1513268307.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:27.889Z,1513268307.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:28.338Z,1513268308.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:28.394Z,1513268308.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:28.691Z,1513268308.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:28.797Z,1513268308.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:29.089Z,1513268309.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:29.490Z,1513268309.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:29.594Z,1513268309.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:29.898Z,1513268309.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:30.303Z,1513268310.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:30.389Z,1513268310.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:30.698Z,1513268310.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:30.793Z,1513268310.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:31.093Z,1513268311.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:31.530Z,1513268311.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:31.590Z,1513268311.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:31.886Z,1513268311.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:32.298Z,1513268312.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:32.385Z,1513268312.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:32.691Z,1513268312.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:32.789Z,1513268312.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:33.100Z,1513268313.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:33.499Z,1513268313.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:33.585Z,1513268313.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:33.893Z,1513268313.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:34.295Z,1513268314.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:34.382Z,1513268314.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:34.712Z,1513268314.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:34.797Z,1513268314.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:35.107Z,1513268315.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:35.507Z,1513268315.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:35.593Z,1513268315.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:35.884Z,1513268315.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:36.303Z,1513268316.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:36.391Z,1513268316.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:36.714Z,1513268316.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:36.809Z,1513268316.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:37.079Z,1513268317.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:37.506Z,1513268317.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:37.606Z,1513268317.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:37.926Z,1513268317.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:38.285Z,1513268318.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:38.401Z,1513268318.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:38.699Z,1513268318.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:38.805Z,1513268318.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:39.096Z,1513268319.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:39.500Z,1513268319.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:39.601Z,1513268319.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:39.899Z,1513268319.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:40.280Z,1513268320.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:40.397Z,1513268320.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:40.678Z,1513268320.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:40.801Z,1513268320.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:41.081Z,1513268321.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:41.480Z,1513268321.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:41.597Z,1513268321.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:41.885Z,1513268321.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:42.285Z,1513268322.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:42.395Z,1513268322.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:42.684Z,1513268322.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:42.801Z,1513268322.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:43.085Z,1513268323.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:43.483Z,1513268323.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:43.598Z,1513268323.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:43.882Z,1513268323.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:44.323Z,1513268324.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:44.395Z,1513268324.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:44.684Z,1513268324.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:44.797Z,1513268324.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:45.091Z,1513268325.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:45.491Z,1513268325.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:45.593Z,1513268325.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:45.883Z,1513268325.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:46.283Z,1513268326.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:46.389Z,1513268326.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:46.715Z,1513268326.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:46.793Z,1513268326.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:47.083Z,1513268327.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:47.499Z,1513268327.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:47.590Z,1513268327.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:47.943Z,1513268327.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:48.298Z,1513268328.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:48.387Z,1513268328.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:48.719Z,1513268328.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:48.809Z,1513268328.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:49.118Z,1513268329.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:49.479Z,1513268329.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:49.607Z,1513268329.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:49.899Z,1513268329.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:50.279Z,1513268330.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:50.402Z,1513268330.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:50.707Z,1513268330.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:50.806Z,1513268330.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:51.088Z,1513268331.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:51.495Z,1513268331.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:51.602Z,1513268331.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:51.887Z,1513268331.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:52.291Z,1513268332.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:52.397Z,1513268332.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:52.699Z,1513268332.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:52.801Z,1513268332.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:53.068Z,1513268333.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:53.478Z,1513268333.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:53.598Z,1513268333.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:53.903Z,1513268333.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:54.284Z,1513268334.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:54.395Z,1513268334.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:54.711Z,1513268334.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:54.801Z,1513268334.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:55.080Z,1513268335.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:55.483Z,1513268335.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:55.598Z,1513268335.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:55.878Z,1513268335.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:56.279Z,1513268336.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:56.395Z,1513268336.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:56.706Z,1513268336.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:56.801Z,1513268336.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:57.086Z,1513268337.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:57.488Z,1513268337.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:57.600Z,1513268337.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:57.876Z,1513268337.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:57.880Z,1513268337.880 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:13:57.7Z
2017-12-14T16:18:57.880Z,1513268337.880 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T16:18:57.880Z,1513268337.880 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T16:18:58.314Z,1513268338.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:58.393Z,1513268338.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:58.799Z,1513268338.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:18:59.133Z,1513268339.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:18:59.594Z,1513268339.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:00.390Z,1513268340.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:00.793Z,1513268340.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:01.590Z,1513268341.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:02.314Z,1513268342.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:02.387Z,1513268342.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:02.414Z,1513268342.414 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0364.lzma
2017-12-14T16:19:02.488Z,1513268342.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:02.809Z,1513268342.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:02.822Z,1513268342.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:03.145Z,1513268343.145 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0364.lzma.bak
2017-12-14T16:19:03.145Z,1513268343.145 [DataOverHttps](INFO): SBD MOMSN=5439116
2017-12-14T16:19:03.214Z,1513268343.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:03.606Z,1513268343.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:04.401Z,1513268344.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:04.543Z,1513268344.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:04.697Z,1513268344.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:04.809Z,1513268344.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:05.606Z,1513268345.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:06.401Z,1513268346.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:06.806Z,1513268346.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:07.602Z,1513268347.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:08.248Z,1513268348.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:08.396Z,1513268348.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:08.398Z,1513268348.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:08.720Z,1513268348.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:08.801Z,1513268348.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:09.163Z,1513268349.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:09.519Z,1513268349.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:09.598Z,1513268349.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:09.959Z,1513268349.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:10.394Z,1513268350.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:10.797Z,1513268350.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:11.594Z,1513268351.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:12.389Z,1513268352.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:12.793Z,1513268352.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:13.540Z,1513268353.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:13.590Z,1513268353.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:13.606Z,1513268353.606 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0365.lzma
2017-12-14T16:19:13.682Z,1513268353.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:14.063Z,1513268354.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x10314 got:0x5659
2017-12-14T16:19:14.134Z,1513268354.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:14.385Z,1513268354.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:14.392Z,1513268354.392 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0365.lzma.bak
2017-12-14T16:19:14.392Z,1513268354.392 [DataOverHttps](INFO): SBD MOMSN=5439120
2017-12-14T16:19:14.471Z,1513268354.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:14.789Z,1513268354.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:15.585Z,1513268355.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:15.651Z,1513268355.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:15.654Z,1513268355.654 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T16:19:15.654Z,1513268355.654 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T16:19:15.654Z,1513268355.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T16:19:15.756Z,1513268355.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:16.383Z,1513268356.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:16.813Z,1513268356.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:17.609Z,1513268357.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:18.406Z,1513268358.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:18.809Z,1513268358.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:19.368Z,1513268359.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:19.542Z,1513268359.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:19.606Z,1513268359.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:19.868Z,1513268359.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:20.269Z,1513268360.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:20.402Z,1513268360.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:20.693Z,1513268360.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:20.805Z,1513268360.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:21.059Z,1513268361.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:21.459Z,1513268361.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:21.602Z,1513268361.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:21.872Z,1513268361.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:22.273Z,1513268362.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:22.397Z,1513268362.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:22.676Z,1513268362.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:22.802Z,1513268362.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:23.060Z,1513268363.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:23.466Z,1513268363.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:23.598Z,1513268363.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:23.862Z,1513268363.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:24.260Z,1513268364.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:24.274Z,1513268364.274 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:19:24.393Z,1513268364.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:24.682Z,1513268364.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:24.797Z,1513268364.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:25.076Z,1513268365.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:25.473Z,1513268365.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:25.594Z,1513268365.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:25.904Z,1513268365.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:26.259Z,1513268366.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:26.389Z,1513268366.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:26.659Z,1513268366.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:26.793Z,1513268366.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:27.085Z,1513268367.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:27.492Z,1513268367.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:27.884Z,1513268367.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:28.283Z,1513268368.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:28.682Z,1513268368.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:29.060Z,1513268369.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:29.460Z,1513268369.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:29.860Z,1513268369.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:30.263Z,1513268370.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:30.687Z,1513268370.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:31.084Z,1513268371.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:31.490Z,1513268371.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:31.586Z,1513268371.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:31.858Z,1513268371.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:32.322Z,1513268372.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:32.383Z,1513268372.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:32.668Z,1513268372.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:32.793Z,1513268372.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:33.062Z,1513268373.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:33.473Z,1513268373.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:33.589Z,1513268373.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:33.880Z,1513268373.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:34.279Z,1513268374.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:34.385Z,1513268374.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:34.677Z,1513268374.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:34.789Z,1513268374.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:35.053Z,1513268375.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:35.459Z,1513268375.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:35.586Z,1513268375.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:35.889Z,1513268375.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:36.283Z,1513268376.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:36.381Z,1513268376.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:36.681Z,1513268376.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:36.785Z,1513268376.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:37.091Z,1513268377.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:37.484Z,1513268377.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:37.582Z,1513268377.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:37.857Z,1513268377.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:38.291Z,1513268378.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:38.377Z,1513268378.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:38.652Z,1513268378.652 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T16:19:38.652Z,1513268378.652 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:19:38.652Z,1513268378.652 [BPC1](ERROR): Data Fault
2017-12-14T16:19:38.660Z,1513268378.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:38.723Z,1513268378.723 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:19:38.781Z,1513268378.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:39.075Z,1513268379.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:39.461Z,1513268379.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:39.577Z,1513268379.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:39.867Z,1513268379.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:39.897Z,1513268379.897 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:19:39.897Z,1513268379.897 [BPC1] No Fault, FailCount= 1
2017-12-14T16:19:40.374Z,1513268380.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:40.379Z,1513268380.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:40.672Z,1513268380.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:40.777Z,1513268380.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:41.067Z,1513268381.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:41.463Z,1513268381.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:41.918Z,1513268381.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:42.257Z,1513268382.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:42.677Z,1513268382.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:43.102Z,1513268383.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:43.479Z,1513268383.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:43.570Z,1513268383.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:43.867Z,1513268383.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:44.263Z,1513268384.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:44.367Z,1513268384.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:44.661Z,1513268384.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:44.785Z,1513268384.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:45.079Z,1513268385.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:45.463Z,1513268385.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:45.581Z,1513268385.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:45.879Z,1513268385.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:46.274Z,1513268386.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:46.274Z,1513268386.274 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 315
2017-12-14T16:19:46.274Z,1513268386.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:19:46.276Z,1513268386.276 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:46.276Z,1513268386.276 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 315
2017-12-14T16:19:46.276Z,1513268386.276 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:19:46.278Z,1513268386.278 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:46.278Z,1513268386.278 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 315
2017-12-14T16:19:46.278Z,1513268386.278 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:19:46.306Z,1513268386.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:19:46.306Z,1513268386.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:19:46.306Z,1513268386.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:19:46.379Z,1513268386.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:46.717Z,1513268386.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:19:46.717Z,1513268386.717 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 315
2017-12-14T16:19:46.717Z,1513268386.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:19:46.717Z,1513268386.717 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 315
2017-12-14T16:19:46.718Z,1513268386.718 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:19:46.718Z,1513268386.718 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 315
2017-12-14T16:19:46.805Z,1513268386.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:47.059Z,1513268387.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:19:47.059Z,1513268387.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:19:47.060Z,1513268387.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:19:47.060Z,1513268387.060 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:19:47.061Z,1513268387.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:19:47.061Z,1513268387.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:19:47.061Z,1513268387.061 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:19:47.062Z,1513268387.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:19:47.062Z,1513268387.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:19:47.524Z,1513268387.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:47.602Z,1513268387.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:47.869Z,1513268387.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:48.288Z,1513268388.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:48.398Z,1513268388.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:48.715Z,1513268388.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:48.801Z,1513268388.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:49.081Z,1513268389.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:49.518Z,1513268389.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:49.598Z,1513268389.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:49.867Z,1513268389.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:50.272Z,1513268390.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:50.393Z,1513268390.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:50.671Z,1513268390.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:50.797Z,1513268390.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:51.067Z,1513268391.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:51.466Z,1513268391.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:51.594Z,1513268391.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:51.871Z,1513268391.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:52.279Z,1513268392.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:52.389Z,1513268392.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:52.683Z,1513268392.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:52.793Z,1513268392.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:53.087Z,1513268393.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:53.456Z,1513268393.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:53.590Z,1513268393.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:53.858Z,1513268393.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:54.256Z,1513268394.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:54.385Z,1513268394.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:54.706Z,1513268394.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:54.790Z,1513268394.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:55.103Z,1513268395.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:55.462Z,1513268395.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:55.586Z,1513268395.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:55.856Z,1513268395.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:56.263Z,1513268396.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:56.381Z,1513268396.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:56.664Z,1513268396.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:56.785Z,1513268396.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:57.100Z,1513268397.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:57.458Z,1513268397.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:57.582Z,1513268397.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:57.885Z,1513268397.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:58.299Z,1513268398.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:58.379Z,1513268398.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:58.686Z,1513268398.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:58.805Z,1513268398.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:59.053Z,1513268399.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:59.479Z,1513268399.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:19:59.602Z,1513268399.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:19:59.862Z,1513268399.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:00.274Z,1513268400.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:00.401Z,1513268400.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:00.738Z,1513268400.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:00.805Z,1513268400.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:01.143Z,1513268401.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:01.513Z,1513268401.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:01.603Z,1513268401.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:01.900Z,1513268401.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:02.283Z,1513268402.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:02.397Z,1513268402.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:02.669Z,1513268402.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:02.801Z,1513268402.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:03.068Z,1513268403.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:03.473Z,1513268403.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:03.597Z,1513268403.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:03.876Z,1513268403.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:04.311Z,1513268404.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:04.394Z,1513268404.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:04.673Z,1513268404.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:04.797Z,1513268404.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:05.054Z,1513268405.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:05.458Z,1513268405.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:05.593Z,1513268405.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:05.858Z,1513268405.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:06.256Z,1513268406.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:06.389Z,1513268406.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:06.678Z,1513268406.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:06.793Z,1513268406.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:07.088Z,1513268407.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:07.497Z,1513268407.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:07.590Z,1513268407.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:07.863Z,1513268407.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:08.258Z,1513268408.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:08.385Z,1513268408.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:08.668Z,1513268408.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:08.789Z,1513268408.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:09.055Z,1513268409.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:09.458Z,1513268409.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:09.586Z,1513268409.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:09.872Z,1513268409.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:10.267Z,1513268410.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:10.381Z,1513268410.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:10.711Z,1513268410.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:10.785Z,1513268410.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:11.057Z,1513268411.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:11.456Z,1513268411.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:11.582Z,1513268411.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:11.863Z,1513268411.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:12.258Z,1513268412.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:12.386Z,1513268412.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:12.676Z,1513268412.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:12.793Z,1513268412.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:13.075Z,1513268413.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:13.468Z,1513268413.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:13.590Z,1513268413.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:13.915Z,1513268413.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:14.270Z,1513268414.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:14.387Z,1513268414.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:14.668Z,1513268414.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:14.797Z,1513268414.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:15.069Z,1513268415.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:15.470Z,1513268415.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:15.593Z,1513268415.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:15.873Z,1513268415.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:16.280Z,1513268416.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:16.389Z,1513268416.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:16.793Z,1513268416.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:17.590Z,1513268417.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:18.385Z,1513268418.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:18.789Z,1513268418.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:19.585Z,1513268419.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:19.731Z,1513268419.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:19.868Z,1513268419.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:20.266Z,1513268420.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:20.382Z,1513268420.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:20.622Z,1513268420.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:20.785Z,1513268420.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:21.003Z,1513268421.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:21.407Z,1513268421.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:21.581Z,1513268421.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:21.831Z,1513268421.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:22.231Z,1513268422.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:22.377Z,1513268422.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:22.667Z,1513268422.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:22.781Z,1513268422.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:23.011Z,1513268423.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:23.444Z,1513268423.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:23.578Z,1513268423.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:23.843Z,1513268423.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:24.204Z,1513268424.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:24.373Z,1513268424.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:24.655Z,1513268424.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:24.777Z,1513268424.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:25.008Z,1513268425.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:25.408Z,1513268425.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:25.573Z,1513268425.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:25.808Z,1513268425.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:26.205Z,1513268426.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:26.375Z,1513268426.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:26.659Z,1513268426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:26.781Z,1513268426.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:27.002Z,1513268427.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:27.407Z,1513268427.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:27.577Z,1513268427.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:27.808Z,1513268427.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:28.212Z,1513268428.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:28.375Z,1513268428.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:28.620Z,1513268428.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:28.798Z,1513268428.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:29.006Z,1513268429.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:29.406Z,1513268429.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:29.594Z,1513268429.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:29.898Z,1513268429.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:30.203Z,1513268430.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:30.390Z,1513268430.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:30.620Z,1513268430.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:30.793Z,1513268430.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:31.019Z,1513268431.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:31.419Z,1513268431.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:31.589Z,1513268431.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:31.799Z,1513268431.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:32.211Z,1513268432.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:32.385Z,1513268432.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:32.610Z,1513268432.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:32.789Z,1513268432.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:33.042Z,1513268433.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:33.423Z,1513268433.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:33.586Z,1513268433.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:33.818Z,1513268433.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:34.218Z,1513268434.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:34.381Z,1513268434.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:34.623Z,1513268434.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:34.785Z,1513268434.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:35.119Z,1513268435.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:35.403Z,1513268435.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:35.582Z,1513268435.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:35.807Z,1513268435.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:36.204Z,1513268436.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:36.378Z,1513268436.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:36.626Z,1513268436.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:36.781Z,1513268436.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:37.022Z,1513268437.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:37.413Z,1513268437.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:37.577Z,1513268437.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:37.809Z,1513268437.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:38.208Z,1513268438.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:38.373Z,1513268438.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:38.623Z,1513268438.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:38.777Z,1513268438.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:39.011Z,1513268439.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:39.435Z,1513268439.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:39.574Z,1513268439.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:39.815Z,1513268439.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:40.220Z,1513268440.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:40.371Z,1513268440.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:40.619Z,1513268440.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:40.785Z,1513268440.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:41.021Z,1513268441.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:41.414Z,1513268441.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:41.582Z,1513268441.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:41.812Z,1513268441.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:42.214Z,1513268442.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:42.379Z,1513268442.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:42.712Z,1513268442.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:42.802Z,1513268442.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:43.021Z,1513268443.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:43.417Z,1513268443.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:43.597Z,1513268443.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:43.815Z,1513268443.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:44.219Z,1513268444.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:44.393Z,1513268444.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:44.619Z,1513268444.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:44.797Z,1513268444.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:45.023Z,1513268445.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:45.442Z,1513268445.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:45.594Z,1513268445.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:45.895Z,1513268445.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:46.226Z,1513268446.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:46.389Z,1513268446.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:46.651Z,1513268446.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:46.793Z,1513268446.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:47.021Z,1513268447.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:47.427Z,1513268447.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:47.590Z,1513268447.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:47.799Z,1513268447.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:48.207Z,1513268448.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:48.385Z,1513268448.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:48.604Z,1513268448.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:48.789Z,1513268448.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:49.058Z,1513268449.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:49.411Z,1513268449.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:49.585Z,1513268449.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:49.801Z,1513268449.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:50.207Z,1513268450.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:50.382Z,1513268450.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:50.611Z,1513268450.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:50.785Z,1513268450.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:51.001Z,1513268451.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:51.403Z,1513268451.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:51.582Z,1513268451.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:51.808Z,1513268451.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:52.239Z,1513268452.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:52.378Z,1513268452.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:52.606Z,1513268452.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:52.781Z,1513268452.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:53.007Z,1513268453.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:53.405Z,1513268453.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:53.578Z,1513268453.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:53.801Z,1513268453.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:54.205Z,1513268454.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:54.375Z,1513268454.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:54.620Z,1513268454.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:54.805Z,1513268454.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:55.012Z,1513268455.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:55.482Z,1513268455.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:55.602Z,1513268455.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:55.815Z,1513268455.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:56.214Z,1513268456.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:56.402Z,1513268456.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:56.627Z,1513268456.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:56.805Z,1513268456.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:57.008Z,1513268457.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:57.396Z,1513268457.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:57.602Z,1513268457.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:57.834Z,1513268457.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:58.222Z,1513268458.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:58.397Z,1513268458.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:58.635Z,1513268458.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:58.801Z,1513268458.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:59.031Z,1513268459.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:59.400Z,1513268459.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:20:59.598Z,1513268459.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:20:59.803Z,1513268459.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:00.204Z,1513268460.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:00.393Z,1513268460.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:00.628Z,1513268460.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:00.797Z,1513268460.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:01.033Z,1513268461.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:01.416Z,1513268461.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:01.593Z,1513268461.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:01.839Z,1513268461.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:02.211Z,1513268462.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:02.389Z,1513268462.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:02.607Z,1513268462.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:02.793Z,1513268462.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:03.009Z,1513268463.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:03.411Z,1513268463.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:03.589Z,1513268463.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:03.825Z,1513268463.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:04.223Z,1513268464.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:04.387Z,1513268464.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:04.617Z,1513268464.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:04.793Z,1513268464.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:05.050Z,1513268465.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:05.415Z,1513268465.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:05.590Z,1513268465.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:05.800Z,1513268465.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:06.199Z,1513268466.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:06.385Z,1513268466.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:06.627Z,1513268466.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:06.789Z,1513268466.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:07.025Z,1513268467.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:07.447Z,1513268467.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:07.585Z,1513268467.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:07.842Z,1513268467.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:08.239Z,1513268468.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:08.383Z,1513268468.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:08.642Z,1513268468.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:08.805Z,1513268468.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:09.001Z,1513268469.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:09.448Z,1513268469.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:09.602Z,1513268469.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:09.808Z,1513268469.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:10.232Z,1513268470.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:10.399Z,1513268470.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:10.616Z,1513268470.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:10.805Z,1513268470.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:11.009Z,1513268471.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:11.408Z,1513268471.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:11.602Z,1513268471.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:11.811Z,1513268471.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:12.207Z,1513268472.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:12.397Z,1513268472.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:12.623Z,1513268472.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:12.801Z,1513268472.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:13.025Z,1513268473.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:13.418Z,1513268473.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:13.597Z,1513268473.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:13.808Z,1513268473.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:14.203Z,1513268474.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:14.393Z,1513268474.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:14.645Z,1513268474.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:14.800Z,1513268474.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:15.012Z,1513268475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:15.419Z,1513268475.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:15.593Z,1513268475.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:15.819Z,1513268475.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:16.219Z,1513268476.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:16.389Z,1513268476.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:16.622Z,1513268476.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:16.793Z,1513268476.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:17.589Z,1513268477.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:18.398Z,1513268478.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:18.805Z,1513268478.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:19.615Z,1513268479.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:20.410Z,1513268480.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:20.814Z,1513268480.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:21.610Z,1513268481.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:22.405Z,1513268482.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:22.666Z,1513268482.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:22.816Z,1513268482.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:22.871Z,1513268482.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:23.210Z,1513268483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:23.610Z,1513268483.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:23.622Z,1513268483.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:24.022Z,1513268484.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:24.405Z,1513268484.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:24.547Z,1513268484.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:24.825Z,1513268484.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:24.835Z,1513268484.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:25.208Z,1513268485.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:25.622Z,1513268485.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:25.634Z,1513268485.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:26.082Z,1513268486.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:26.417Z,1513268486.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:26.454Z,1513268486.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:26.818Z,1513268486.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:26.821Z,1513268486.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:27.180Z,1513268487.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:27.608Z,1513268487.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:27.620Z,1513268487.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:28.118Z,1513268488.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:28.399Z,1513268488.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:28.414Z,1513268488.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:28.818Z,1513268488.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:28.836Z,1513268488.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:29.205Z,1513268489.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:29.599Z,1513268489.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:29.614Z,1513268489.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:29.974Z,1513268489.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:30.410Z,1513268490.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:30.419Z,1513268490.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:30.791Z,1513268490.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:30.815Z,1513268490.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:21:31.219Z,1513268491.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:31.680Z,1513268491.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:32.079Z,1513268492.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:32.408Z,1513268492.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:32.807Z,1513268492.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:33.180Z,1513268493.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:33.614Z,1513268493.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:34.006Z,1513268494.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:34.450Z,1513268494.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:34.887Z,1513268494.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:35.211Z,1513268495.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:35.658Z,1513268495.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:35.986Z,1513268495.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:36.555Z,1513268496.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:36.826Z,1513268496.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:37.199Z,1513268497.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:37.631Z,1513268497.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:38.051Z,1513268498.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:38.495Z,1513268498.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:38.799Z,1513268498.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:39.207Z,1513268499.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:39.608Z,1513268499.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:40.065Z,1513268500.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:40.403Z,1513268500.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:40.815Z,1513268500.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:41.223Z,1513268501.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:41.592Z,1513268501.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:42.026Z,1513268502.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:42.420Z,1513268502.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:42.833Z,1513268502.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:43.207Z,1513268503.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:43.599Z,1513268503.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:44.087Z,1513268504.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:44.423Z,1513268504.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:44.860Z,1513268504.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:45.218Z,1513268505.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:45.617Z,1513268505.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:45.990Z,1513268505.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:46.417Z,1513268506.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:46.867Z,1513268506.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:47.208Z,1513268507.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:47.617Z,1513268507.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:47.984Z,1513268507.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:48.388Z,1513268508.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:48.784Z,1513268508.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:49.188Z,1513268509.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:49.591Z,1513268509.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:49.999Z,1513268509.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:50.482Z,1513268510.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:50.843Z,1513268510.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:51.188Z,1513268511.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:51.589Z,1513268511.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:51.994Z,1513268511.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:52.467Z,1513268512.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:52.819Z,1513268512.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:53.203Z,1513268513.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:53.601Z,1513268513.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:54.087Z,1513268514.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:54.389Z,1513268514.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:54.814Z,1513268514.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:55.186Z,1513268515.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:55.593Z,1513268515.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:56.078Z,1513268516.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:56.411Z,1513268516.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:56.875Z,1513268516.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:57.187Z,1513268517.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:57.600Z,1513268517.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:58.037Z,1513268518.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:58.409Z,1513268518.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:58.802Z,1513268518.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:59.199Z,1513268519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:59.603Z,1513268519.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:21:59.974Z,1513268519.974 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:21:59.974Z,1513268519.974 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:21:59.974Z,1513268519.974 [BPC1](ERROR): Communications Fault
2017-12-14T16:22:00.058Z,1513268520.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:00.106Z,1513268520.106 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:22:00.383Z,1513268520.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:00.788Z,1513268520.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:01.184Z,1513268521.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:01.197Z,1513268521.197 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:22:01.197Z,1513268521.197 [BPC1] No Fault, FailCount= 1
2017-12-14T16:22:01.639Z,1513268521.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:02.002Z,1513268522.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:02.403Z,1513268522.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:02.784Z,1513268522.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:03.185Z,1513268523.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:03.610Z,1513268523.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:03.995Z,1513268523.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:04.451Z,1513268524.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:04.811Z,1513268524.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:05.204Z,1513268525.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:05.619Z,1513268525.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:06.012Z,1513268526.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:06.479Z,1513268526.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:06.857Z,1513268526.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:07.226Z,1513268527.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:07.588Z,1513268527.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:08.074Z,1513268528.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:08.394Z,1513268528.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:08.795Z,1513268528.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:09.191Z,1513268529.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:09.599Z,1513268529.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:10.134Z,1513268530.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:10.407Z,1513268530.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:10.804Z,1513268530.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:11.219Z,1513268531.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:11.609Z,1513268531.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:11.988Z,1513268531.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:12.394Z,1513268532.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:12.796Z,1513268532.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:13.194Z,1513268533.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:13.601Z,1513268533.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:14.078Z,1513268534.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:14.416Z,1513268534.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:14.787Z,1513268534.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:15.187Z,1513268535.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:15.631Z,1513268535.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:15.998Z,1513268535.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:16.422Z,1513268536.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:16.791Z,1513268536.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:17.314Z,1513268537.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:22:18.109Z,1513268538.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:22:21.677Z,1513268541.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:21.837Z,1513268541.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:22.188Z,1513268542.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:22.607Z,1513268542.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:22.991Z,1513268542.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:23.399Z,1513268543.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:23.798Z,1513268543.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:24.190Z,1513268544.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:24.595Z,1513268544.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:24.986Z,1513268544.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:25.384Z,1513268545.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:25.787Z,1513268545.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:26.191Z,1513268546.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:26.597Z,1513268546.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:26.000Z,1513268547.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:27.399Z,1513268547.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:27.774Z,1513268547.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:28.175Z,1513268548.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:28.572Z,1513268548.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:28.979Z,1513268548.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:29.372Z,1513268549.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:29.779Z,1513268549.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:30.181Z,1513268550.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:30.576Z,1513268550.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:30.975Z,1513268550.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:31.375Z,1513268551.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:31.805Z,1513268551.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:32.177Z,1513268552.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:32.587Z,1513268552.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:32.991Z,1513268552.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:33.384Z,1513268553.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:33.777Z,1513268553.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:34.179Z,1513268554.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:34.587Z,1513268554.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:34.979Z,1513268554.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:35.380Z,1513268555.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:35.843Z,1513268555.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:36.183Z,1513268556.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:36.584Z,1513268556.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:36.977Z,1513268556.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:37.378Z,1513268557.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:37.778Z,1513268557.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:38.174Z,1513268558.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:38.614Z,1513268558.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:39.028Z,1513268559.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:39.391Z,1513268559.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:39.779Z,1513268559.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:40.186Z,1513268560.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:40.579Z,1513268560.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:40.977Z,1513268560.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:41.379Z,1513268561.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:41.795Z,1513268561.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:42.241Z,1513268562.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:42.585Z,1513268562.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:43.014Z,1513268563.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:43.379Z,1513268563.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:43.775Z,1513268563.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:44.204Z,1513268564.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:44.591Z,1513268564.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:45.030Z,1513268565.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:45.434Z,1513268565.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:45.821Z,1513268565.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:46.179Z,1513268566.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:46.577Z,1513268566.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:46.976Z,1513268566.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:47.375Z,1513268567.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:47.375Z,1513268567.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 316
2017-12-14T16:22:47.375Z,1513268567.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:22:47.377Z,1513268567.377 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:47.377Z,1513268567.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 316
2017-12-14T16:22:47.377Z,1513268567.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:22:47.379Z,1513268567.379 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:47.379Z,1513268567.379 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 316
2017-12-14T16:22:47.379Z,1513268567.379 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:22:47.391Z,1513268567.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:22:47.391Z,1513268567.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:22:47.391Z,1513268567.391 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:22:47.798Z,1513268567.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:22:47.798Z,1513268567.798 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 316
2017-12-14T16:22:47.798Z,1513268567.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:22:47.798Z,1513268567.798 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 316
2017-12-14T16:22:47.799Z,1513268567.799 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:22:47.799Z,1513268567.799 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 316
2017-12-14T16:22:48.186Z,1513268568.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:22:48.187Z,1513268568.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:22:48.187Z,1513268568.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:22:48.188Z,1513268568.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:22:48.188Z,1513268568.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:22:48.188Z,1513268568.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:22:48.190Z,1513268568.190 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:22:48.190Z,1513268568.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:22:48.191Z,1513268568.191 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:22:48.647Z,1513268568.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:48.983Z,1513268568.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:49.381Z,1513268569.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:49.782Z,1513268569.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:50.184Z,1513268570.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:50.588Z,1513268570.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:50.987Z,1513268570.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:51.391Z,1513268571.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:51.796Z,1513268571.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:52.201Z,1513268572.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:52.586Z,1513268572.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:52.985Z,1513268572.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:53.389Z,1513268573.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:53.793Z,1513268573.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:54.246Z,1513268574.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:54.601Z,1513268574.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:55.038Z,1513268575.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:55.372Z,1513268575.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:55.774Z,1513268575.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:56.173Z,1513268576.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:56.599Z,1513268576.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:56.000Z,1513268577.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:57.403Z,1513268577.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:57.772Z,1513268577.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:58.246Z,1513268578.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:58.583Z,1513268578.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:58.983Z,1513268578.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:59.383Z,1513268579.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:22:59.781Z,1513268579.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:00.185Z,1513268580.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:00.587Z,1513268580.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:00.976Z,1513268580.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:01.410Z,1513268581.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:01.777Z,1513268581.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:02.179Z,1513268582.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:02.583Z,1513268582.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:02.994Z,1513268582.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:03.396Z,1513268583.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:03.780Z,1513268583.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:04.195Z,1513268584.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:04.636Z,1513268584.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:05.011Z,1513268585.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:05.385Z,1513268585.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:05.791Z,1513268585.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:06.195Z,1513268586.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:06.615Z,1513268586.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:06.992Z,1513268586.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:07.410Z,1513268587.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:07.800Z,1513268587.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:08.193Z,1513268588.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:08.591Z,1513268588.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:08.995Z,1513268588.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:09.392Z,1513268589.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:09.771Z,1513268589.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:10.171Z,1513268590.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:10.596Z,1513268590.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:11.054Z,1513268591.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:11.395Z,1513268591.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:11.797Z,1513268591.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:12.194Z,1513268592.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:12.595Z,1513268592.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:12.996Z,1513268592.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:13.398Z,1513268593.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:13.772Z,1513268593.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:14.211Z,1513268594.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:14.587Z,1513268594.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:14.984Z,1513268594.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:15.380Z,1513268595.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:15.779Z,1513268595.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:16.178Z,1513268596.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:16.618Z,1513268596.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:16.980Z,1513268596.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:20.530Z,1513268600.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:20.703Z,1513268600.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:21.079Z,1513268601.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:21.480Z,1513268601.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:21.875Z,1513268601.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:22.274Z,1513268602.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:22.679Z,1513268602.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:23.072Z,1513268603.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:23.475Z,1513268603.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:23.884Z,1513268603.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:24.302Z,1513268604.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:24.695Z,1513268604.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:25.091Z,1513268605.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:25.463Z,1513268605.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:25.889Z,1513268605.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:26.287Z,1513268606.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:26.690Z,1513268606.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:27.141Z,1513268607.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:27.515Z,1513268607.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:27.862Z,1513268607.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:28.271Z,1513268608.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:28.668Z,1513268608.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:29.114Z,1513268609.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:29.465Z,1513268609.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:29.903Z,1513268609.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:30.276Z,1513268610.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:30.711Z,1513268610.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:31.061Z,1513268611.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:31.463Z,1513268611.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:31.860Z,1513268611.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:32.262Z,1513268612.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:32.676Z,1513268612.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:33.083Z,1513268613.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:33.480Z,1513268613.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:33.866Z,1513268613.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:34.270Z,1513268614.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:34.675Z,1513268614.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:35.070Z,1513268615.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:35.472Z,1513268615.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:35.882Z,1513268615.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:36.281Z,1513268616.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:36.717Z,1513268616.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:37.075Z,1513268617.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:37.476Z,1513268617.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:37.871Z,1513268617.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:38.274Z,1513268618.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:38.681Z,1513268618.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:39.117Z,1513268619.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:39.481Z,1513268619.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:39.907Z,1513268619.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:40.296Z,1513268620.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:40.677Z,1513268620.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:41.080Z,1513268621.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:41.480Z,1513268621.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:41.887Z,1513268621.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:42.291Z,1513268622.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:42.684Z,1513268622.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:43.131Z,1513268623.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:43.468Z,1513268623.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:43.879Z,1513268623.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:44.279Z,1513268624.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:44.673Z,1513268624.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:45.087Z,1513268625.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:45.476Z,1513268625.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:45.872Z,1513268625.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:46.315Z,1513268626.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:46.675Z,1513268626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:47.070Z,1513268627.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:47.476Z,1513268627.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:47.879Z,1513268627.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:48.296Z,1513268628.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:48.676Z,1513268628.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:49.069Z,1513268629.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:49.510Z,1513268629.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:49.920Z,1513268629.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:50.275Z,1513268630.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:50.716Z,1513268630.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:51.083Z,1513268631.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:51.514Z,1513268631.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:51.875Z,1513268631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:52.307Z,1513268632.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:52.711Z,1513268632.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:53.076Z,1513268633.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:53.464Z,1513268633.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:53.888Z,1513268633.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:54.272Z,1513268634.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:54.676Z,1513268634.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:55.142Z,1513268635.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:55.471Z,1513268635.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:55.914Z,1513268635.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:56.271Z,1513268636.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:56.672Z,1513268636.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:57.075Z,1513268637.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:57.479Z,1513268637.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:57.863Z,1513268637.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:58.265Z,1513268638.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:58.676Z,1513268638.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:59.104Z,1513268639.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:59.471Z,1513268639.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:23:59.876Z,1513268639.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:00.327Z,1513268640.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:00.683Z,1513268640.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:01.071Z,1513268641.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:01.469Z,1513268641.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:01.868Z,1513268641.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:02.271Z,1513268642.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:02.684Z,1513268642.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:03.083Z,1513268643.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:03.480Z,1513268643.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:03.871Z,1513268643.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:04.271Z,1513268644.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:04.666Z,1513268644.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:05.130Z,1513268645.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:05.519Z,1513268645.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:05.887Z,1513268645.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:06.279Z,1513268646.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:06.676Z,1513268646.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:07.069Z,1513268647.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:07.472Z,1513268647.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:07.870Z,1513268647.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:08.283Z,1513268648.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:08.719Z,1513268648.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:09.080Z,1513268649.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:09.479Z,1513268649.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:09.871Z,1513268649.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:10.278Z,1513268650.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:10.664Z,1513268650.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:11.067Z,1513268651.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:11.504Z,1513268651.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:11.916Z,1513268651.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:12.364Z,1513268652.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:12.692Z,1513268652.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:13.068Z,1513268653.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:13.499Z,1513268653.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:13.866Z,1513268653.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:14.300Z,1513268654.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:14.676Z,1513268654.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:15.149Z,1513268655.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:15.499Z,1513268655.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:15.868Z,1513268655.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:15.871Z,1513268655.871 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:24:15.871Z,1513268655.871 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:24:15.871Z,1513268655.871 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:24:15.871Z,1513268655.871 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:24:16.272Z,1513268656.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:16.275Z,1513268656.275 [Default:CheckIn:D] Stopped
2017-12-14T16:24:16.275Z,1513268656.275 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:24:16.675Z,1513268656.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 951.014779 min 
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn:E] Stopped
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn] Stopped
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn](INFO): Running loop #92
2017-12-14T16:24:16.679Z,1513268656.679 [Default:CheckIn] Running Loop=92
2017-12-14T16:24:16.680Z,1513268656.680 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:24:16.680Z,1513268656.680 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:24:17.073Z,1513268657.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:20.544Z,1513268660.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:20.695Z,1513268660.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:21.048Z,1513268661.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:21.475Z,1513268661.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:21.841Z,1513268661.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:22.247Z,1513268662.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:22.680Z,1513268662.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:23.044Z,1513268663.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:23.444Z,1513268663.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:23.855Z,1513268663.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:24.249Z,1513268664.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:24.697Z,1513268664.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:25.048Z,1513268665.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:25.440Z,1513268665.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:25.841Z,1513268665.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:26.245Z,1513268666.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:26.652Z,1513268666.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:27.052Z,1513268667.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:27.450Z,1513268667.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:27.923Z,1513268667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:28.240Z,1513268668.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:28.638Z,1513268668.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:29.055Z,1513268669.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:29.436Z,1513268669.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:29.868Z,1513268669.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:30.244Z,1513268670.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:30.640Z,1513268670.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:31.039Z,1513268671.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:31.443Z,1513268671.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:31.840Z,1513268671.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:32.237Z,1513268672.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:32.640Z,1513268672.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:33.064Z,1513268673.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:33.467Z,1513268673.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:33.842Z,1513268673.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:34.298Z,1513268674.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:34.673Z,1513268674.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:35.050Z,1513268675.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:35.452Z,1513268675.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:35.879Z,1513268675.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:36.256Z,1513268676.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:36.679Z,1513268676.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:37.049Z,1513268677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:37.472Z,1513268677.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:37.855Z,1513268677.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:38.253Z,1513268678.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:38.664Z,1513268678.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:39.060Z,1513268679.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:39.453Z,1513268679.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:39.835Z,1513268679.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:40.232Z,1513268680.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:40.655Z,1513268680.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:41.043Z,1513268681.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:41.437Z,1513268681.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:41.860Z,1513268681.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:42.263Z,1513268682.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:42.659Z,1513268682.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:43.037Z,1513268683.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:43.440Z,1513268683.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:43.836Z,1513268683.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:44.251Z,1513268684.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:44.648Z,1513268684.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:45.090Z,1513268685.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:45.453Z,1513268685.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:45.837Z,1513268685.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:46.243Z,1513268686.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:46.647Z,1513268686.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:47.043Z,1513268687.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:47.446Z,1513268687.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:47.853Z,1513268687.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:48.255Z,1513268688.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:48.653Z,1513268688.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:49.044Z,1513268689.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:49.447Z,1513268689.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:49.839Z,1513268689.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:50.244Z,1513268690.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:50.656Z,1513268690.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:51.064Z,1513268691.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:51.458Z,1513268691.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:51.839Z,1513268691.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:52.236Z,1513268692.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:52.661Z,1513268692.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:53.039Z,1513268693.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:53.479Z,1513268693.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:53.866Z,1513268693.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:54.262Z,1513268694.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:54.662Z,1513268694.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:55.037Z,1513268695.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:55.443Z,1513268695.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:55.841Z,1513268695.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:56.273Z,1513268696.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:56.679Z,1513268696.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:57.079Z,1513268697.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:57.484Z,1513268697.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:57.842Z,1513268697.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:58.278Z,1513268698.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:58.642Z,1513268698.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:59.075Z,1513268699.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:59.444Z,1513268699.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:24:59.880Z,1513268699.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:00.257Z,1513268700.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:00.648Z,1513268700.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:01.041Z,1513268701.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:01.447Z,1513268701.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:01.844Z,1513268701.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:02.241Z,1513268702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:02.651Z,1513268702.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:03.052Z,1513268703.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:03.452Z,1513268703.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:03.844Z,1513268703.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:04.259Z,1513268704.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:04.642Z,1513268704.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:05.049Z,1513268705.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:05.451Z,1513268705.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:05.852Z,1513268705.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:06.264Z,1513268706.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:06.660Z,1513268706.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:07.035Z,1513268707.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:07.470Z,1513268707.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:07.839Z,1513268707.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:08.234Z,1513268708.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:08.660Z,1513268708.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:09.062Z,1513268709.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:09.465Z,1513268709.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:09.836Z,1513268709.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:10.239Z,1513268710.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:10.646Z,1513268710.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:11.036Z,1513268711.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:11.447Z,1513268711.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:11.851Z,1513268711.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:12.245Z,1513268712.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:12.677Z,1513268712.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:13.043Z,1513268713.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:13.442Z,1513268713.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:13.842Z,1513268713.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:14.239Z,1513268714.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:14.646Z,1513268714.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:15.044Z,1513268715.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:15.444Z,1513268715.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:15.901Z,1513268715.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:16.239Z,1513268716.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:16.643Z,1513268716.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:17.043Z,1513268717.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:17.443Z,1513268717.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:21.068Z,1513268721.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:21.231Z,1513268721.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:21.583Z,1513268721.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:21.944Z,1513268721.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:22.495Z,1513268722.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:22.735Z,1513268722.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:23.133Z,1513268723.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:23.559Z,1513268723.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:23.971Z,1513268723.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:24.350Z,1513268724.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:24.743Z,1513268724.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:25.144Z,1513268725.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:25.547Z,1513268725.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:25.959Z,1513268725.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:26.359Z,1513268726.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:26.741Z,1513268726.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:27.144Z,1513268727.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:27.543Z,1513268727.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:27.943Z,1513268727.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:28.348Z,1513268728.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:28.760Z,1513268728.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:29.160Z,1513268729.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:29.567Z,1513268729.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:30.091Z,1513268730.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:30.331Z,1513268730.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:30.780Z,1513268730.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:31.146Z,1513268731.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:31.552Z,1513268731.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:31.959Z,1513268731.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:32.407Z,1513268732.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:32.749Z,1513268732.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:33.148Z,1513268733.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:33.539Z,1513268733.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:33.948Z,1513268733.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:34.412Z,1513268734.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:34.751Z,1513268734.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:35.154Z,1513268735.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:35.592Z,1513268735.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:35.956Z,1513268735.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:36.385Z,1513268736.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:36.739Z,1513268736.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:37.142Z,1513268737.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:37.574Z,1513268737.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:37.951Z,1513268737.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:38.349Z,1513268738.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:38.826Z,1513268738.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:39.142Z,1513268739.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:39.551Z,1513268739.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:39.959Z,1513268739.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:40.359Z,1513268740.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:40.751Z,1513268740.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:41.149Z,1513268741.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:41.554Z,1513268741.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:42.052Z,1513268742.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:42.359Z,1513268742.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:42.800Z,1513268742.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:43.150Z,1513268743.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:43.593Z,1513268743.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:43.959Z,1513268743.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:44.396Z,1513268744.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:44.753Z,1513268744.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:45.156Z,1513268745.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:45.560Z,1513268745.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:45.957Z,1513268745.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:46.366Z,1513268746.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:46.743Z,1513268746.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:47.139Z,1513268747.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:47.567Z,1513268747.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:47.944Z,1513268747.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:48.452Z,1513268748.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:48.465Z,1513268748.465 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 317
2017-12-14T16:25:48.465Z,1513268748.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:25:48.467Z,1513268748.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:48.467Z,1513268748.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 317
2017-12-14T16:25:48.467Z,1513268748.467 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:25:48.481Z,1513268748.481 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:48.481Z,1513268748.481 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 317
2017-12-14T16:25:48.481Z,1513268748.481 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:25:48.530Z,1513268748.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:25:48.530Z,1513268748.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:25:48.531Z,1513268748.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:25:48.763Z,1513268748.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:25:48.763Z,1513268748.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 317
2017-12-14T16:25:48.763Z,1513268748.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:25:48.763Z,1513268748.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 317
2017-12-14T16:25:48.764Z,1513268748.764 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:25:48.764Z,1513268748.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 317
2017-12-14T16:25:49.150Z,1513268749.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:25:49.151Z,1513268749.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:25:49.151Z,1513268749.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:25:49.151Z,1513268749.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:25:49.152Z,1513268749.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:25:49.152Z,1513268749.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:25:49.152Z,1513268749.152 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:25:49.159Z,1513268749.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:25:49.160Z,1513268749.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:25:49.536Z,1513268749.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:49.934Z,1513268749.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:50.418Z,1513268750.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:50.751Z,1513268750.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:51.149Z,1513268751.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:51.544Z,1513268751.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:51.940Z,1513268751.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:52.347Z,1513268752.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:52.763Z,1513268752.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:53.156Z,1513268753.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:53.560Z,1513268753.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:53.972Z,1513268753.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:54.357Z,1513268754.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:54.751Z,1513268754.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:55.147Z,1513268755.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:55.566Z,1513268755.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:55.964Z,1513268755.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:56.360Z,1513268756.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:56.736Z,1513268756.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:57.135Z,1513268757.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:57.566Z,1513268757.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:58.056Z,1513268758.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:58.351Z,1513268758.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:58.731Z,1513268758.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:59.162Z,1513268759.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:59.559Z,1513268759.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:25:59.963Z,1513268759.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:00.363Z,1513268760.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:00.735Z,1513268760.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:01.162Z,1513268761.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:01.567Z,1513268761.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:01.962Z,1513268761.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:02.420Z,1513268762.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:02.738Z,1513268762.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:03.140Z,1513268763.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:03.540Z,1513268763.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:03.952Z,1513268763.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:04.408Z,1513268764.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:04.803Z,1513268764.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:05.183Z,1513268765.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:05.551Z,1513268765.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:06.055Z,1513268766.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:06.359Z,1513268766.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:06.786Z,1513268766.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:07.147Z,1513268767.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:07.553Z,1513268767.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:07.951Z,1513268767.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:08.395Z,1513268768.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:08.751Z,1513268768.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:09.150Z,1513268769.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:09.551Z,1513268769.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:09.952Z,1513268769.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:10.343Z,1513268770.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:10.751Z,1513268770.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:11.152Z,1513268771.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:11.584Z,1513268771.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:11.952Z,1513268771.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:12.347Z,1513268772.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:12.745Z,1513268772.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:13.146Z,1513268773.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:13.558Z,1513268773.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:13.963Z,1513268773.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:14.350Z,1513268774.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:14.775Z,1513268774.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:15.183Z,1513268775.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:15.567Z,1513268775.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:15.971Z,1513268775.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:16.451Z,1513268776.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:16.743Z,1513268776.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:17.230Z,1513268777.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:17.588Z,1513268777.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:25.356Z,1513268785.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:25.536Z,1513268785.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:25.899Z,1513268785.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:26.291Z,1513268786.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:26.748Z,1513268786.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:27.127Z,1513268787.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:27.475Z,1513268787.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:27.932Z,1513268787.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:28.299Z,1513268788.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:28.727Z,1513268788.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:29.089Z,1513268789.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:29.492Z,1513268789.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:29.919Z,1513268789.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:30.283Z,1513268790.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:30.703Z,1513268790.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:31.127Z,1513268791.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:31.491Z,1513268791.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:31.917Z,1513268791.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:32.282Z,1513268792.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:32.684Z,1513268792.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:33.059Z,1513268793.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:33.462Z,1513268793.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:33.888Z,1513268793.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:34.294Z,1513268794.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:34.692Z,1513268794.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:35.071Z,1513268795.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:35.467Z,1513268795.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:35.864Z,1513268795.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:36.267Z,1513268796.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:36.672Z,1513268796.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:37.109Z,1513268797.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:37.495Z,1513268797.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:37.875Z,1513268797.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:38.277Z,1513268798.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:38.671Z,1513268798.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:39.075Z,1513268799.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:39.475Z,1513268799.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:39.889Z,1513268799.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:40.287Z,1513268800.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:40.742Z,1513268800.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:41.078Z,1513268801.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:41.530Z,1513268801.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:41.878Z,1513268801.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:42.283Z,1513268802.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:42.687Z,1513268802.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:43.121Z,1513268803.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:43.483Z,1513268803.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:43.926Z,1513268803.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:44.257Z,1513268804.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:44.681Z,1513268804.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:45.087Z,1513268805.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:45.461Z,1513268805.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:45.888Z,1513268805.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:46.295Z,1513268806.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:46.675Z,1513268806.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:47.102Z,1513268807.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:47.468Z,1513268807.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:47.871Z,1513268807.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:48.276Z,1513268808.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:48.712Z,1513268808.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:49.136Z,1513268809.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:49.481Z,1513268809.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:49.863Z,1513268809.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:50.342Z,1513268810.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:50.672Z,1513268810.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:51.069Z,1513268811.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:51.467Z,1513268811.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:51.882Z,1513268811.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:52.290Z,1513268812.290 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:26:52.290Z,1513268812.290 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:26:52.290Z,1513268812.290 [BPC1](ERROR): Communications Fault
2017-12-14T16:26:52.303Z,1513268812.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:52.350Z,1513268812.350 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:26:52.679Z,1513268812.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:53.060Z,1513268813.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:53.485Z,1513268813.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:53.499Z,1513268813.499 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:26:53.499Z,1513268813.499 [BPC1] No Fault, FailCount= 1
2017-12-14T16:26:53.921Z,1513268813.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:54.272Z,1513268814.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:54.692Z,1513268814.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:55.093Z,1513268815.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:55.495Z,1513268815.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:55.865Z,1513268815.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:56.268Z,1513268816.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:56.675Z,1513268816.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:57.067Z,1513268817.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:57.476Z,1513268817.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:57.879Z,1513268817.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:58.280Z,1513268818.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:58.686Z,1513268818.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:59.084Z,1513268819.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:59.495Z,1513268819.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:26:59.951Z,1513268819.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:00.280Z,1513268820.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:00.703Z,1513268820.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:01.107Z,1513268821.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:01.487Z,1513268821.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:01.881Z,1513268821.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:02.288Z,1513268822.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:02.694Z,1513268822.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:03.081Z,1513268823.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:03.475Z,1513268823.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:03.888Z,1513268823.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:04.296Z,1513268824.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:04.684Z,1513268824.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:05.071Z,1513268825.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:05.483Z,1513268825.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:05.903Z,1513268825.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:06.286Z,1513268826.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:06.679Z,1513268826.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:07.079Z,1513268827.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:07.499Z,1513268827.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:07.896Z,1513268827.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:08.302Z,1513268828.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:08.701Z,1513268828.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:09.082Z,1513268829.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:09.512Z,1513268829.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:09.887Z,1513268829.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:10.295Z,1513268830.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:10.687Z,1513268830.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:11.082Z,1513268831.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:11.496Z,1513268831.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:11.900Z,1513268831.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:12.287Z,1513268832.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:12.702Z,1513268832.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:13.172Z,1513268833.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:13.499Z,1513268833.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:13.901Z,1513268833.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:14.315Z,1513268834.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:14.692Z,1513268834.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:15.107Z,1513268835.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:15.492Z,1513268835.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:15.927Z,1513268835.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:16.323Z,1513268836.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:16.703Z,1513268836.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:17.172Z,1513268837.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:17.478Z,1513268837.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:17.879Z,1513268837.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:21.278Z,1513268841.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:21.435Z,1513268841.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:21.775Z,1513268841.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:22.177Z,1513268842.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:22.591Z,1513268842.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:22.957Z,1513268842.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:23.390Z,1513268843.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:23.763Z,1513268843.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:24.168Z,1513268844.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:24.556Z,1513268844.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:24.953Z,1513268844.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:25.351Z,1513268845.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:25.785Z,1513268845.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:26.153Z,1513268846.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:26.560Z,1513268846.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:26.960Z,1513268846.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:27.360Z,1513268847.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:27.755Z,1513268847.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:28.156Z,1513268848.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:28.571Z,1513268848.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:29.032Z,1513268849.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:29.374Z,1513268849.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:29.752Z,1513268849.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:30.167Z,1513268850.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:30.564Z,1513268850.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:30.956Z,1513268850.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:31.356Z,1513268851.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:31.764Z,1513268851.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:32.217Z,1513268852.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:32.575Z,1513268852.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:32.958Z,1513268852.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:33.356Z,1513268853.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:33.767Z,1513268853.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:34.159Z,1513268854.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:34.564Z,1513268854.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:35.022Z,1513268855.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:35.399Z,1513268855.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:35.784Z,1513268855.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:36.160Z,1513268856.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:36.580Z,1513268856.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:36.956Z,1513268856.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:37.397Z,1513268857.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:37.766Z,1513268857.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:38.183Z,1513268858.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:38.583Z,1513268858.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:38.961Z,1513268858.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:39.360Z,1513268859.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:39.761Z,1513268859.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:40.163Z,1513268860.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:40.564Z,1513268860.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:40.967Z,1513268860.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:41.361Z,1513268861.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:41.767Z,1513268861.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:42.160Z,1513268862.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:42.552Z,1513268862.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:42.950Z,1513268862.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:43.358Z,1513268863.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:43.760Z,1513268863.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:44.178Z,1513268864.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:44.580Z,1513268864.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:45.004Z,1513268865.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:45.358Z,1513268865.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:45.788Z,1513268865.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:46.152Z,1513268866.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:46.582Z,1513268866.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:46.960Z,1513268866.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:47.356Z,1513268867.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:47.756Z,1513268867.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:48.231Z,1513268868.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:48.554Z,1513268868.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:48.959Z,1513268868.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:49.353Z,1513268869.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:49.763Z,1513268869.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:50.160Z,1513268870.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:50.563Z,1513268870.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:50.961Z,1513268870.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:51.419Z,1513268871.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:51.747Z,1513268871.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:52.175Z,1513268872.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:52.568Z,1513268872.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:52.975Z,1513268872.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:53.375Z,1513268873.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:53.747Z,1513268873.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:54.149Z,1513268874.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:54.601Z,1513268874.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:54.951Z,1513268874.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:55.351Z,1513268875.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:55.783Z,1513268875.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:56.181Z,1513268876.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:56.602Z,1513268876.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:56.971Z,1513268876.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:57.350Z,1513268877.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:57.780Z,1513268877.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:58.188Z,1513268878.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:58.567Z,1513268878.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:59.003Z,1513268879.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:59.367Z,1513268879.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:27:59.779Z,1513268879.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:00.162Z,1513268880.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:00.571Z,1513268880.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:00.996Z,1513268880.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:01.380Z,1513268881.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:01.776Z,1513268881.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:02.156Z,1513268882.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:02.553Z,1513268882.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:03.134Z,1513268883.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:03.356Z,1513268883.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:03.753Z,1513268883.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:04.214Z,1513268884.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:04.565Z,1513268884.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:04.975Z,1513268884.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:05.367Z,1513268885.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:05.752Z,1513268885.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:06.162Z,1513268886.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:06.552Z,1513268886.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:06.952Z,1513268886.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:07.391Z,1513268887.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:07.764Z,1513268887.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:08.210Z,1513268888.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:08.579Z,1513268888.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:08.957Z,1513268888.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:09.357Z,1513268889.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:09.755Z,1513268889.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:10.161Z,1513268890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:10.623Z,1513268890.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:10.971Z,1513268890.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:11.365Z,1513268891.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:11.767Z,1513268891.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:12.147Z,1513268892.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:12.572Z,1513268892.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:12.951Z,1513268892.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:13.347Z,1513268893.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:13.826Z,1513268893.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:14.175Z,1513268894.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:14.556Z,1513268894.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:14.951Z,1513268894.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:15.346Z,1513268895.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:15.759Z,1513268895.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:16.151Z,1513268896.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:16.560Z,1513268896.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:16.986Z,1513268896.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:17.359Z,1513268897.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:17.751Z,1513268897.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:18.163Z,1513268898.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:21.655Z,1513268901.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:21.789Z,1513268901.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:22.100Z,1513268902.100 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T16:28:22.101Z,1513268902.101 [NAL9602] Data Fault, FailCount= 2
2017-12-14T16:28:22.101Z,1513268902.101 [NAL9602](ERROR): Data Fault
2017-12-14T16:28:22.171Z,1513268902.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:22.184Z,1513268902.184 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T16:28:22.510Z,1513268902.510 [NAL9602](INFO): Powering down
2017-12-14T16:28:22.563Z,1513268902.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:22.970Z,1513268902.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:23.402Z,1513268903.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:23.427Z,1513268903.427 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T16:28:23.427Z,1513268903.427 [NAL9602] No Fault, FailCount= 2
2017-12-14T16:28:23.752Z,1513268903.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:24.132Z,1513268904.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:24.559Z,1513268904.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:24.935Z,1513268904.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:25.359Z,1513268905.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:25.734Z,1513268905.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:26.155Z,1513268906.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:26.575Z,1513268906.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:26.936Z,1513268906.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:27.338Z,1513268907.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:27.747Z,1513268907.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:28.136Z,1513268908.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:28.538Z,1513268908.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:28.939Z,1513268908.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:29.337Z,1513268909.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:29.785Z,1513268909.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:30.143Z,1513268910.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:30.538Z,1513268910.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:30.939Z,1513268910.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:31.375Z,1513268911.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:31.736Z,1513268911.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:32.143Z,1513268912.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:32.540Z,1513268912.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:32.975Z,1513268912.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:33.343Z,1513268913.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:33.740Z,1513268913.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:34.174Z,1513268914.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:34.543Z,1513268914.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:34.972Z,1513268914.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:35.341Z,1513268915.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:35.740Z,1513268915.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:36.189Z,1513268916.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:36.545Z,1513268916.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:36.946Z,1513268916.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:37.346Z,1513268917.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:37.586Z,1513268917.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:28:37.738Z,1513268917.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:38.140Z,1513268918.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:38.383Z,1513268918.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:28:38.553Z,1513268918.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:38.793Z,1513268918.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:28:38.943Z,1513268918.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:39.395Z,1513268919.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:39.752Z,1513268919.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:40.132Z,1513268920.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:40.560Z,1513268920.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:40.940Z,1513268920.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:41.340Z,1513268921.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:41.743Z,1513268921.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:42.137Z,1513268922.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:42.635Z,1513268922.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:42.974Z,1513268922.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:43.342Z,1513268923.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:43.764Z,1513268923.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:44.145Z,1513268924.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:44.586Z,1513268924.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:44.946Z,1513268924.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:45.339Z,1513268925.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:45.741Z,1513268925.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:46.155Z,1513268926.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:46.545Z,1513268926.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:46.996Z,1513268926.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:47.342Z,1513268927.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:47.742Z,1513268927.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:48.160Z,1513268928.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:48.547Z,1513268928.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:49.002Z,1513268929.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:49.344Z,1513268929.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:49.349Z,1513268929.349 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 318
2017-12-14T16:28:49.349Z,1513268929.349 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:28:49.351Z,1513268929.351 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:49.351Z,1513268929.351 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 318
2017-12-14T16:28:49.351Z,1513268929.351 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:28:49.357Z,1513268929.357 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:49.357Z,1513268929.357 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 318
2017-12-14T16:28:49.357Z,1513268929.357 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:28:49.381Z,1513268929.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:28:49.381Z,1513268929.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:28:49.382Z,1513268929.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:28:49.761Z,1513268929.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:28:49.761Z,1513268929.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 318
2017-12-14T16:28:49.762Z,1513268929.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:28:49.762Z,1513268929.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 318
2017-12-14T16:28:49.762Z,1513268929.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:28:49.762Z,1513268929.762 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 318
2017-12-14T16:28:50.150Z,1513268930.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:28:50.151Z,1513268930.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:28:50.151Z,1513268930.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:28:50.152Z,1513268930.152 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:28:50.152Z,1513268930.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:28:50.152Z,1513268930.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:28:50.153Z,1513268930.153 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:28:50.153Z,1513268930.153 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:28:50.153Z,1513268930.153 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:28:50.555Z,1513268930.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:50.953Z,1513268930.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:51.359Z,1513268931.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:51.725Z,1513268931.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:52.226Z,1513268932.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:52.555Z,1513268932.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:52.906Z,1513268932.906 [NAL9602](INFO): Powering up NAL9602
2017-12-14T16:28:52.971Z,1513268932.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:53.336Z,1513268933.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:53.735Z,1513268933.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:54.136Z,1513268934.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:54.539Z,1513268934.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:54.935Z,1513268934.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:55.415Z,1513268935.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:55.763Z,1513268935.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:56.136Z,1513268936.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:56.539Z,1513268936.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:56.939Z,1513268936.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:57.339Z,1513268937.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:57.739Z,1513268937.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:58.141Z,1513268938.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:58.592Z,1513268938.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:58.939Z,1513268938.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:59.339Z,1513268939.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:28:59.750Z,1513268939.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:00.144Z,1513268940.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:00.540Z,1513268940.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:00.943Z,1513268940.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:01.342Z,1513268941.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:01.787Z,1513268941.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:02.147Z,1513268942.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:02.537Z,1513268942.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:02.941Z,1513268942.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:03.342Z,1513268943.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:03.802Z,1513268943.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:04.102Z,1513268944.102 [NAL9602](INFO): NAL9602 initialized
2017-12-14T16:29:04.180Z,1513268944.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:04.544Z,1513268944.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:05.061Z,1513268945.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:05.359Z,1513268945.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:05.578Z,1513268945.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:05.752Z,1513268945.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:06.171Z,1513268946.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:06.387Z,1513268946.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:06.546Z,1513268946.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:06.793Z,1513268946.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:06.971Z,1513268946.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:07.353Z,1513268947.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:07.756Z,1513268947.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:08.196Z,1513268948.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:08.547Z,1513268948.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:08.947Z,1513268948.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:09.341Z,1513268949.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:09.747Z,1513268949.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:10.147Z,1513268950.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:10.552Z,1513268950.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:10.959Z,1513268950.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:11.398Z,1513268951.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:11.750Z,1513268951.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:12.144Z,1513268952.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:12.552Z,1513268952.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:12.950Z,1513268952.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:13.356Z,1513268953.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:13.763Z,1513268953.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:14.151Z,1513268954.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:14.591Z,1513268954.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:14.950Z,1513268954.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:15.363Z,1513268955.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:15.735Z,1513268955.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:16.168Z,1513268956.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:16.567Z,1513268956.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:16.967Z,1513268956.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:16.975Z,1513268956.975 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:24:16.7Z
2017-12-14T16:29:16.975Z,1513268956.975 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T16:29:16.975Z,1513268956.975 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T16:29:17.369Z,1513268957.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:18.231Z,1513268958.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:18.431Z,1513268958.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:19.597Z,1513268959.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:20.394Z,1513268960.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:20.797Z,1513268960.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:21.593Z,1513268961.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:21.859Z,1513268961.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:21.935Z,1513268961.935 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0368.lzma
2017-12-14T16:29:22.056Z,1513268962.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:22.389Z,1513268962.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:22.419Z,1513268962.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:22.740Z,1513268962.740 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0368.lzma.bak
2017-12-14T16:29:22.741Z,1513268962.741 [DataOverHttps](INFO): SBD MOMSN=5439127
2017-12-14T16:29:22.793Z,1513268962.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:22.823Z,1513268962.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:23.589Z,1513268963.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:23.929Z,1513268963.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:24.115Z,1513268964.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:24.386Z,1513268964.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:24.789Z,1513268964.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:25.585Z,1513268965.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:26.381Z,1513268966.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:26.785Z,1513268966.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:27.447Z,1513268967.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:27.525Z,1513268967.525 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:29:27.582Z,1513268967.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:27.691Z,1513268967.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:28.067Z,1513268968.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:28.380Z,1513268968.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:28.448Z,1513268968.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:28.785Z,1513268968.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:28.807Z,1513268968.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:29.222Z,1513268969.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:29.581Z,1513268969.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:30.377Z,1513268970.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:30.782Z,1513268970.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:31.577Z,1513268971.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:32.375Z,1513268972.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:32.758Z,1513268972.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:32.797Z,1513268972.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:32.880Z,1513268972.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:33.257Z,1513268973.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:33.593Z,1513268973.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:33.661Z,1513268973.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:34.068Z,1513268974.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:34.390Z,1513268974.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:34.480Z,1513268974.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:34.793Z,1513268974.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:35.589Z,1513268975.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:36.385Z,1513268976.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:36.789Z,1513268976.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:37.586Z,1513268977.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:37.864Z,1513268977.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:37.957Z,1513268977.957 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0369.lzma
2017-12-14T16:29:38.079Z,1513268978.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:38.381Z,1513268978.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:38.389Z,1513268978.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:38.712Z,1513268978.712 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0369.lzma.bak
2017-12-14T16:29:38.712Z,1513268978.712 [DataOverHttps](INFO): SBD MOMSN=5439141
2017-12-14T16:29:38.779Z,1513268978.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:38.785Z,1513268978.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:39.581Z,1513268979.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:39.930Z,1513268979.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:39.934Z,1513268979.934 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T16:29:39.934Z,1513268979.934 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T16:29:39.934Z,1513268979.934 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T16:29:40.111Z,1513268980.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:40.393Z,1513268980.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:40.797Z,1513268980.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:41.593Z,1513268981.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:42.389Z,1513268982.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:42.793Z,1513268982.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:43.423Z,1513268983.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:43.555Z,1513268983.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:43.589Z,1513268983.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:43.934Z,1513268983.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:44.339Z,1513268984.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:44.386Z,1513268984.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:44.735Z,1513268984.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:44.789Z,1513268984.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:45.120Z,1513268985.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:45.522Z,1513268985.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:45.585Z,1513268985.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:45.921Z,1513268985.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:46.383Z,1513268986.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:46.406Z,1513268986.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:46.764Z,1513268986.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:46.805Z,1513268986.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:47.146Z,1513268987.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:47.534Z,1513268987.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:47.601Z,1513268987.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:47.934Z,1513268987.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:48.391Z,1513268988.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:48.398Z,1513268988.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:48.744Z,1513268988.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:48.801Z,1513268988.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:49.113Z,1513268989.113 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T16:29:49.113Z,1513268989.113 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:29:49.113Z,1513268989.113 [BPC1](ERROR): Data Fault
2017-12-14T16:29:49.121Z,1513268989.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:49.167Z,1513268989.167 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:29:49.551Z,1513268989.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:49.597Z,1513268989.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:50.034Z,1513268990.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:50.110Z,1513268990.110 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T16:29:50.110Z,1513268990.110 [DropWeight] No Fault, FailCount= 1
2017-12-14T16:29:50.343Z,1513268990.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:50.356Z,1513268990.356 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:29:50.356Z,1513268990.356 [BPC1] No Fault, FailCount= 1
2017-12-14T16:29:50.394Z,1513268990.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:50.784Z,1513268990.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:50.797Z,1513268990.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:51.140Z,1513268991.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:51.541Z,1513268991.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:51.593Z,1513268991.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:51.935Z,1513268991.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:52.334Z,1513268992.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:52.389Z,1513268992.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:52.751Z,1513268992.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:52.793Z,1513268992.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:53.140Z,1513268993.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:53.544Z,1513268993.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:53.589Z,1513268993.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:53.920Z,1513268993.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:54.343Z,1513268994.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:54.385Z,1513268994.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:54.747Z,1513268994.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:54.789Z,1513268994.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:55.149Z,1513268995.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:55.548Z,1513268995.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:55.586Z,1513268995.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:56.075Z,1513268996.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:56.373Z,1513268996.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:56.381Z,1513268996.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:56.726Z,1513268996.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:56.785Z,1513268996.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:57.123Z,1513268997.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:57.530Z,1513268997.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:57.582Z,1513268997.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:57.960Z,1513268997.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:58.339Z,1513268998.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:58.377Z,1513268998.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:58.732Z,1513268998.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:58.781Z,1513268998.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:59.162Z,1513268999.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:59.578Z,1513268999.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:29:59.581Z,1513268999.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:29:59.936Z,1513268999.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:00.375Z,1513269000.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:00.378Z,1513269000.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:00.739Z,1513269000.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:00.793Z,1513269000.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:01.138Z,1513269001.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:01.538Z,1513269001.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:01.589Z,1513269001.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:01.939Z,1513269001.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:02.387Z,1513269002.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:02.449Z,1513269002.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:02.759Z,1513269002.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:02.801Z,1513269002.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:03.127Z,1513269003.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:03.531Z,1513269003.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:03.597Z,1513269003.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:03.921Z,1513269003.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:04.331Z,1513269004.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:04.394Z,1513269004.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:04.753Z,1513269004.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:04.797Z,1513269004.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:05.161Z,1513269005.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:05.525Z,1513269005.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:05.593Z,1513269005.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:05.982Z,1513269005.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:06.325Z,1513269006.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:06.397Z,1513269006.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:06.735Z,1513269006.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:06.801Z,1513269006.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:07.141Z,1513269007.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:07.539Z,1513269007.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:07.597Z,1513269007.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:07.937Z,1513269007.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:08.342Z,1513269008.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:08.393Z,1513269008.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:08.716Z,1513269008.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:08.797Z,1513269008.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:09.140Z,1513269009.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:09.574Z,1513269009.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:09.593Z,1513269009.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:09.924Z,1513269009.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:10.331Z,1513269010.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:10.389Z,1513269010.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:10.730Z,1513269010.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:10.793Z,1513269010.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:11.160Z,1513269011.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:11.560Z,1513269011.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:11.589Z,1513269011.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:11.933Z,1513269011.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:12.344Z,1513269012.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:12.386Z,1513269012.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:12.778Z,1513269012.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:12.789Z,1513269012.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:13.163Z,1513269013.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:13.571Z,1513269013.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:13.585Z,1513269013.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:13.951Z,1513269013.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:14.383Z,1513269014.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:14.415Z,1513269014.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:14.722Z,1513269014.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:14.793Z,1513269014.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:15.123Z,1513269015.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:15.559Z,1513269015.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:15.590Z,1513269015.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:15.935Z,1513269015.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:16.389Z,1513269016.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:16.419Z,1513269016.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:16.743Z,1513269016.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:16.797Z,1513269016.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:17.144Z,1513269017.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:17.530Z,1513269017.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:17.593Z,1513269017.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:17.936Z,1513269017.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:18.335Z,1513269018.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:18.390Z,1513269018.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:18.756Z,1513269018.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:18.794Z,1513269018.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:19.137Z,1513269019.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:19.539Z,1513269019.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:19.589Z,1513269019.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:19.937Z,1513269019.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:20.332Z,1513269020.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:20.386Z,1513269020.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:20.732Z,1513269020.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:20.789Z,1513269020.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:21.131Z,1513269021.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:21.527Z,1513269021.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:21.585Z,1513269021.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:22.068Z,1513269022.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:22.335Z,1513269022.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:22.382Z,1513269022.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:22.742Z,1513269022.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:22.785Z,1513269022.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:23.159Z,1513269023.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:23.534Z,1513269023.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:23.581Z,1513269023.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:23.937Z,1513269023.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:24.320Z,1513269024.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:24.377Z,1513269024.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:24.720Z,1513269024.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:24.781Z,1513269024.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:25.149Z,1513269025.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:25.551Z,1513269025.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:25.594Z,1513269025.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:25.951Z,1513269025.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:26.344Z,1513269026.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:26.389Z,1513269026.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:26.722Z,1513269026.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:26.793Z,1513269026.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:27.118Z,1513269027.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:27.515Z,1513269027.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:27.589Z,1513269027.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:27.928Z,1513269027.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:28.387Z,1513269028.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:28.473Z,1513269028.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:28.737Z,1513269028.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:28.817Z,1513269028.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:29.139Z,1513269029.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:29.531Z,1513269029.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:29.613Z,1513269029.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:29.935Z,1513269029.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:30.375Z,1513269030.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:30.410Z,1513269030.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:30.722Z,1513269030.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:30.813Z,1513269030.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:31.132Z,1513269031.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:31.536Z,1513269031.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:31.611Z,1513269031.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:31.931Z,1513269031.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:32.335Z,1513269032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:32.406Z,1513269032.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:32.730Z,1513269032.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:32.812Z,1513269032.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:33.131Z,1513269033.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:33.526Z,1513269033.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:33.605Z,1513269033.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:34.032Z,1513269034.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:34.328Z,1513269034.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:34.401Z,1513269034.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:34.771Z,1513269034.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:34.805Z,1513269034.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:35.135Z,1513269035.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:35.601Z,1513269035.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:35.607Z,1513269035.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:35.924Z,1513269035.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:36.327Z,1513269036.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:36.397Z,1513269036.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:36.728Z,1513269036.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:36.801Z,1513269036.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:37.135Z,1513269037.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:37.530Z,1513269037.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:37.597Z,1513269037.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:37.928Z,1513269037.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:38.329Z,1513269038.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:38.393Z,1513269038.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:38.756Z,1513269038.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:38.797Z,1513269038.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:39.128Z,1513269039.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:39.528Z,1513269039.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:39.593Z,1513269039.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:39.928Z,1513269039.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:40.344Z,1513269040.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:40.389Z,1513269040.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:40.793Z,1513269040.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:41.589Z,1513269041.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:42.387Z,1513269042.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:42.793Z,1513269042.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:43.589Z,1513269043.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:43.764Z,1513269043.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:43.914Z,1513269043.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:44.236Z,1513269044.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:44.387Z,1513269044.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:44.642Z,1513269044.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:44.797Z,1513269044.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:45.036Z,1513269045.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:45.444Z,1513269045.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:45.593Z,1513269045.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:45.844Z,1513269045.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:46.244Z,1513269046.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:46.389Z,1513269046.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:46.644Z,1513269046.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:46.793Z,1513269046.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:47.036Z,1513269047.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:47.431Z,1513269047.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:47.589Z,1513269047.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:47.839Z,1513269047.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:48.279Z,1513269048.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:48.386Z,1513269048.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:48.648Z,1513269048.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:48.789Z,1513269048.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:49.055Z,1513269049.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:49.440Z,1513269049.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:49.585Z,1513269049.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:49.840Z,1513269049.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:50.244Z,1513269050.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:50.381Z,1513269050.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:50.643Z,1513269050.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:50.785Z,1513269050.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:51.044Z,1513269051.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:51.488Z,1513269051.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:51.581Z,1513269051.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:51.855Z,1513269051.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:52.246Z,1513269052.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:52.377Z,1513269052.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:52.641Z,1513269052.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:52.781Z,1513269052.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:53.039Z,1513269053.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:53.447Z,1513269053.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:53.577Z,1513269053.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:53.843Z,1513269053.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:54.255Z,1513269054.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:54.373Z,1513269054.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:54.680Z,1513269054.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:54.778Z,1513269054.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:55.045Z,1513269055.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:55.459Z,1513269055.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:55.575Z,1513269055.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:55.871Z,1513269055.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:56.241Z,1513269056.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:56.371Z,1513269056.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:56.660Z,1513269056.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:56.789Z,1513269056.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:57.048Z,1513269057.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:57.488Z,1513269057.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:57.585Z,1513269057.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:57.906Z,1513269057.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:58.251Z,1513269058.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:58.383Z,1513269058.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:58.651Z,1513269058.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:58.789Z,1513269058.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:59.057Z,1513269059.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:59.428Z,1513269059.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:30:59.587Z,1513269059.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:30:59.830Z,1513269059.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:00.243Z,1513269060.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:00.382Z,1513269060.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:00.673Z,1513269060.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:00.785Z,1513269060.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:01.076Z,1513269061.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:01.446Z,1513269061.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:01.581Z,1513269061.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:01.855Z,1513269061.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:02.247Z,1513269062.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:02.377Z,1513269062.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:02.643Z,1513269062.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:02.781Z,1513269062.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:03.043Z,1513269063.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:03.445Z,1513269063.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:03.577Z,1513269063.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:03.846Z,1513269063.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:04.256Z,1513269064.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:04.374Z,1513269064.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:04.647Z,1513269064.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:04.777Z,1513269064.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:05.036Z,1513269065.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:05.440Z,1513269065.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:05.573Z,1513269065.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:05.860Z,1513269065.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:06.250Z,1513269066.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:06.371Z,1513269066.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:06.652Z,1513269066.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:06.777Z,1513269066.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:07.048Z,1513269067.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:07.514Z,1513269067.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:07.581Z,1513269067.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:07.842Z,1513269067.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:08.245Z,1513269068.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:08.377Z,1513269068.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:08.647Z,1513269068.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:08.781Z,1513269068.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:09.042Z,1513269069.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:09.448Z,1513269069.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:09.577Z,1513269069.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:09.850Z,1513269069.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:10.249Z,1513269070.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:10.383Z,1513269070.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:10.693Z,1513269070.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:10.798Z,1513269070.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:11.047Z,1513269071.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:11.450Z,1513269071.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:11.593Z,1513269071.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:11.847Z,1513269071.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:12.250Z,1513269072.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:12.390Z,1513269072.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:12.649Z,1513269072.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:12.805Z,1513269072.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:13.053Z,1513269073.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:13.445Z,1513269073.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:13.602Z,1513269073.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:13.901Z,1513269073.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:14.242Z,1513269074.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:14.398Z,1513269074.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:14.657Z,1513269074.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:14.802Z,1513269074.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:15.049Z,1513269075.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:15.475Z,1513269075.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:15.597Z,1513269075.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:15.871Z,1513269075.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:16.304Z,1513269076.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:16.394Z,1513269076.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:16.675Z,1513269076.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:16.798Z,1513269076.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:17.076Z,1513269077.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:17.452Z,1513269077.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:17.594Z,1513269077.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:17.872Z,1513269077.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:18.347Z,1513269078.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:18.390Z,1513269078.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:18.678Z,1513269078.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:18.794Z,1513269078.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:19.056Z,1513269079.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:19.495Z,1513269079.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:19.589Z,1513269079.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:19.876Z,1513269079.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:20.299Z,1513269080.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:20.386Z,1513269080.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:20.790Z,1513269080.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:20.790Z,1513269080.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:21.039Z,1513269081.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:21.492Z,1513269081.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:21.586Z,1513269081.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:21.854Z,1513269081.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:22.251Z,1513269082.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:22.381Z,1513269082.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:22.647Z,1513269082.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:22.785Z,1513269082.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:23.062Z,1513269083.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:23.457Z,1513269083.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:23.581Z,1513269083.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:23.835Z,1513269083.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:24.266Z,1513269084.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:24.379Z,1513269084.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:24.667Z,1513269084.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:24.801Z,1513269084.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:25.064Z,1513269085.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:25.459Z,1513269085.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:25.597Z,1513269085.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:25.860Z,1513269085.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:26.276Z,1513269086.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:26.394Z,1513269086.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:26.667Z,1513269086.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:26.801Z,1513269086.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:27.052Z,1513269087.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:27.450Z,1513269087.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:27.597Z,1513269087.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:27.879Z,1513269087.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:28.252Z,1513269088.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:28.395Z,1513269088.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:28.711Z,1513269088.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:28.798Z,1513269088.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:29.086Z,1513269089.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:29.470Z,1513269089.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:29.595Z,1513269089.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:29.866Z,1513269089.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:30.271Z,1513269090.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:30.390Z,1513269090.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:30.723Z,1513269090.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:30.793Z,1513269090.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:31.075Z,1513269091.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:31.467Z,1513269091.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:31.589Z,1513269091.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:31.891Z,1513269091.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:32.275Z,1513269092.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:32.386Z,1513269092.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:32.667Z,1513269092.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:32.789Z,1513269092.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:33.041Z,1513269093.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:33.455Z,1513269093.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:33.585Z,1513269093.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:33.889Z,1513269093.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:34.245Z,1513269094.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:34.381Z,1513269094.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:34.639Z,1513269094.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:34.785Z,1513269094.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:35.035Z,1513269095.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:35.442Z,1513269095.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:35.582Z,1513269095.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:35.843Z,1513269095.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:36.255Z,1513269096.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:36.377Z,1513269096.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:36.648Z,1513269096.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:36.782Z,1513269096.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:37.045Z,1513269097.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:37.434Z,1513269097.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:37.577Z,1513269097.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:37.837Z,1513269097.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:38.239Z,1513269098.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:38.375Z,1513269098.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:38.647Z,1513269098.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:38.789Z,1513269098.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:39.039Z,1513269099.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:39.451Z,1513269099.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:39.585Z,1513269099.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:39.849Z,1513269099.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:40.254Z,1513269100.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:40.383Z,1513269100.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:40.695Z,1513269100.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:40.789Z,1513269100.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:41.588Z,1513269101.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:42.382Z,1513269102.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:42.785Z,1513269102.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:43.581Z,1513269103.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:44.377Z,1513269104.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:44.781Z,1513269104.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:44.982Z,1513269104.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:45.118Z,1513269105.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:45.522Z,1513269105.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:45.577Z,1513269105.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:45.881Z,1513269105.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:46.319Z,1513269106.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:46.374Z,1513269106.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:46.655Z,1513269106.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:46.777Z,1513269106.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:47.056Z,1513269107.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:47.456Z,1513269107.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:47.573Z,1513269107.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:47.863Z,1513269107.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:48.261Z,1513269108.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:48.369Z,1513269108.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:48.685Z,1513269108.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:48.773Z,1513269108.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:49.056Z,1513269109.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:49.515Z,1513269109.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:49.577Z,1513269109.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:49.884Z,1513269109.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:50.257Z,1513269110.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:50.257Z,1513269110.257 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 319
2017-12-14T16:31:50.257Z,1513269110.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:31:50.259Z,1513269110.259 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:50.259Z,1513269110.259 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 319
2017-12-14T16:31:50.259Z,1513269110.259 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:31:50.266Z,1513269110.266 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:50.266Z,1513269110.266 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 319
2017-12-14T16:31:50.266Z,1513269110.266 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:31:50.286Z,1513269110.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:31:50.286Z,1513269110.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:31:50.287Z,1513269110.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:31:50.373Z,1513269110.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:50.676Z,1513269110.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:31:50.689Z,1513269110.689 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 319
2017-12-14T16:31:50.689Z,1513269110.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:31:50.689Z,1513269110.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 319
2017-12-14T16:31:50.690Z,1513269110.690 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:31:50.690Z,1513269110.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 319
2017-12-14T16:31:51.054Z,1513269111.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:31:51.054Z,1513269111.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:31:51.054Z,1513269111.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:31:51.055Z,1513269111.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:31:51.055Z,1513269111.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:31:51.055Z,1513269111.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:31:51.056Z,1513269111.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:31:51.056Z,1513269111.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:31:51.057Z,1513269111.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:31:51.169Z,1513269111.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:51.473Z,1513269111.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:51.867Z,1513269111.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:51.965Z,1513269111.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:52.275Z,1513269112.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:52.701Z,1513269112.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:52.761Z,1513269112.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:53.095Z,1513269113.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:53.476Z,1513269113.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:53.558Z,1513269113.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:53.852Z,1513269113.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:54.303Z,1513269114.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:54.355Z,1513269114.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:54.711Z,1513269114.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:55.077Z,1513269115.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:55.150Z,1513269115.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:55.523Z,1513269115.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:55.862Z,1513269115.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:55.946Z,1513269115.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:56.261Z,1513269116.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:56.662Z,1513269116.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:56.743Z,1513269116.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:57.052Z,1513269117.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:57.478Z,1513269117.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:57.537Z,1513269117.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:57.874Z,1513269117.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:58.307Z,1513269118.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:58.334Z,1513269118.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:58.663Z,1513269118.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:58.738Z,1513269118.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:59.063Z,1513269119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:59.141Z,1513269119.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:59.450Z,1513269119.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:59.546Z,1513269119.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:31:59.852Z,1513269119.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:31:59.949Z,1513269119.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:00.279Z,1513269120.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:00.353Z,1513269120.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:00.684Z,1513269120.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:00.758Z,1513269120.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:01.078Z,1513269121.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:01.459Z,1513269121.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:01.553Z,1513269121.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:01.888Z,1513269121.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:02.318Z,1513269122.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:02.349Z,1513269122.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:02.666Z,1513269122.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:02.753Z,1513269122.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:03.110Z,1513269123.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:03.476Z,1513269123.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:03.550Z,1513269123.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:03.911Z,1513269123.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:04.275Z,1513269124.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:04.346Z,1513269124.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:04.683Z,1513269124.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:04.753Z,1513269124.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:05.082Z,1513269125.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:05.487Z,1513269125.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:05.550Z,1513269125.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:05.879Z,1513269125.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:06.293Z,1513269126.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:06.348Z,1513269126.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:06.735Z,1513269126.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:06.801Z,1513269126.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:07.095Z,1513269127.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:07.483Z,1513269127.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:07.598Z,1513269127.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:07.903Z,1513269127.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:08.299Z,1513269128.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:08.395Z,1513269128.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:08.741Z,1513269128.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:08.801Z,1513269128.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:09.072Z,1513269129.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:09.471Z,1513269129.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:09.597Z,1513269129.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:09.865Z,1513269129.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:10.266Z,1513269130.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:10.393Z,1513269130.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:10.662Z,1513269130.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:10.797Z,1513269130.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:11.058Z,1513269131.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:11.463Z,1513269131.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:11.593Z,1513269131.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:11.855Z,1513269131.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:12.269Z,1513269132.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:12.389Z,1513269132.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:12.669Z,1513269132.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:12.793Z,1513269132.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:13.071Z,1513269133.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:13.459Z,1513269133.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:13.589Z,1513269133.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:13.863Z,1513269133.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:14.302Z,1513269134.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:14.385Z,1513269134.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:14.665Z,1513269134.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:14.789Z,1513269134.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:15.062Z,1513269135.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:15.479Z,1513269135.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:15.585Z,1513269135.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:15.865Z,1513269135.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:16.271Z,1513269136.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:16.385Z,1513269136.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:16.662Z,1513269136.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:16.789Z,1513269136.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:17.096Z,1513269137.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:17.461Z,1513269137.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:17.586Z,1513269137.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:17.866Z,1513269137.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:18.323Z,1513269138.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:18.389Z,1513269138.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:18.668Z,1513269138.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:18.793Z,1513269138.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:19.074Z,1513269139.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:19.456Z,1513269139.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:19.589Z,1513269139.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:19.863Z,1513269139.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:20.259Z,1513269140.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:20.386Z,1513269140.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:20.658Z,1513269140.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:20.793Z,1513269140.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:21.059Z,1513269141.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:21.511Z,1513269141.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:21.589Z,1513269141.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:21.879Z,1513269141.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:22.269Z,1513269142.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:22.387Z,1513269142.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:22.659Z,1513269142.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:22.793Z,1513269142.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:23.067Z,1513269143.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:23.461Z,1513269143.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:23.590Z,1513269143.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:23.862Z,1513269143.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:24.279Z,1513269144.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:24.385Z,1513269144.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:24.687Z,1513269144.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:24.790Z,1513269144.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:25.068Z,1513269145.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:25.466Z,1513269145.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:25.585Z,1513269145.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:25.866Z,1513269145.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:26.267Z,1513269146.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:26.381Z,1513269146.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:26.660Z,1513269146.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:26.785Z,1513269146.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:27.071Z,1513269147.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:27.487Z,1513269147.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:27.581Z,1513269147.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:27.934Z,1513269147.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:28.283Z,1513269148.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:28.377Z,1513269148.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:28.663Z,1513269148.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:28.781Z,1513269148.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:29.064Z,1513269149.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:29.506Z,1513269149.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:29.577Z,1513269149.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:29.854Z,1513269149.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:30.271Z,1513269150.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:30.373Z,1513269150.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:30.699Z,1513269150.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:30.777Z,1513269150.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:31.070Z,1513269151.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:31.498Z,1513269151.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:31.573Z,1513269151.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:31.860Z,1513269151.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:32.271Z,1513269152.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:32.369Z,1513269152.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:32.661Z,1513269152.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:32.773Z,1513269152.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:33.058Z,1513269153.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:33.468Z,1513269153.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:33.569Z,1513269153.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:33.879Z,1513269153.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:34.367Z,1513269154.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:34.409Z,1513269154.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:34.658Z,1513269154.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:34.793Z,1513269154.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:35.060Z,1513269155.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:35.456Z,1513269155.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:35.589Z,1513269155.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:35.855Z,1513269155.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:36.282Z,1513269156.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:36.390Z,1513269156.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:36.664Z,1513269156.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:36.793Z,1513269156.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:37.061Z,1513269157.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:37.467Z,1513269157.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:37.589Z,1513269157.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:37.859Z,1513269157.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:38.266Z,1513269158.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:38.385Z,1513269158.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:38.666Z,1513269158.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:38.789Z,1513269158.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:39.055Z,1513269159.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:39.475Z,1513269159.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:39.585Z,1513269159.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:39.899Z,1513269159.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:40.271Z,1513269160.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:40.381Z,1513269160.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:40.696Z,1513269160.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:40.786Z,1513269160.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:41.581Z,1513269161.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:42.377Z,1513269162.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:42.781Z,1513269162.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:43.577Z,1513269163.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:44.164Z,1513269164.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:44.301Z,1513269164.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:44.373Z,1513269164.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:44.662Z,1513269164.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:44.777Z,1513269164.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:45.047Z,1513269165.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:45.440Z,1513269165.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:45.574Z,1513269165.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:45.838Z,1513269165.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:46.236Z,1513269166.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:46.369Z,1513269166.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:46.643Z,1513269166.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:46.773Z,1513269166.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:47.038Z,1513269167.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:47.445Z,1513269167.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:47.569Z,1513269167.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:47.848Z,1513269167.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:48.263Z,1513269168.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:48.367Z,1513269168.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:48.655Z,1513269168.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:48.777Z,1513269168.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:49.050Z,1513269169.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:49.446Z,1513269169.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:49.573Z,1513269169.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:49.846Z,1513269169.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:50.296Z,1513269170.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:50.371Z,1513269170.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:50.647Z,1513269170.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:50.801Z,1513269170.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:51.087Z,1513269171.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:51.436Z,1513269171.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:51.597Z,1513269171.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:51.876Z,1513269171.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:52.243Z,1513269172.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:52.393Z,1513269172.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:52.741Z,1513269172.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:52.797Z,1513269172.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:53.035Z,1513269173.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:53.479Z,1513269173.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:53.594Z,1513269173.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:53.852Z,1513269173.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:54.251Z,1513269174.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:54.389Z,1513269174.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:54.640Z,1513269174.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:54.793Z,1513269174.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:55.047Z,1513269175.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:55.438Z,1513269175.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:55.589Z,1513269175.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:55.839Z,1513269175.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:56.244Z,1513269176.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:56.385Z,1513269176.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:56.676Z,1513269176.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:56.790Z,1513269176.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:57.052Z,1513269177.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:57.451Z,1513269177.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:57.587Z,1513269177.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:57.836Z,1513269177.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:58.260Z,1513269178.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:58.381Z,1513269178.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:58.655Z,1513269178.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:58.785Z,1513269178.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:59.032Z,1513269179.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:59.467Z,1513269179.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:32:59.581Z,1513269179.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:32:59.867Z,1513269179.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:00.264Z,1513269180.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:00.378Z,1513269180.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:00.635Z,1513269180.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:00.781Z,1513269180.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:01.036Z,1513269181.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:01.436Z,1513269181.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:01.578Z,1513269181.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:01.867Z,1513269181.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:02.266Z,1513269182.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:02.375Z,1513269182.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:02.643Z,1513269182.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:02.785Z,1513269182.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:03.073Z,1513269183.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:03.435Z,1513269183.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:03.581Z,1513269183.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:03.850Z,1513269183.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:04.240Z,1513269184.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:04.379Z,1513269184.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:04.642Z,1513269184.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:04.785Z,1513269184.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:05.038Z,1513269185.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:05.454Z,1513269185.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:05.581Z,1513269185.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:05.851Z,1513269185.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:06.327Z,1513269186.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:06.379Z,1513269186.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:06.651Z,1513269186.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:06.781Z,1513269186.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:07.046Z,1513269187.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:07.446Z,1513269187.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:07.580Z,1513269187.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:07.827Z,1513269187.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:08.248Z,1513269188.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:08.378Z,1513269188.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:08.657Z,1513269188.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:08.783Z,1513269188.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:09.063Z,1513269189.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:09.471Z,1513269189.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:09.578Z,1513269189.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:09.848Z,1513269189.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:10.239Z,1513269190.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:10.373Z,1513269190.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:10.636Z,1513269190.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:10.778Z,1513269190.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:11.039Z,1513269191.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:11.448Z,1513269191.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:11.573Z,1513269191.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:11.852Z,1513269191.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:12.244Z,1513269192.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:12.369Z,1513269192.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:12.659Z,1513269192.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:12.774Z,1513269192.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:13.059Z,1513269193.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:13.441Z,1513269193.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:13.569Z,1513269193.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:13.867Z,1513269193.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:14.251Z,1513269194.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:14.365Z,1513269194.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:14.687Z,1513269194.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:14.769Z,1513269194.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:15.059Z,1513269195.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:15.467Z,1513269195.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:15.566Z,1513269195.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:15.863Z,1513269195.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:16.248Z,1513269196.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:16.363Z,1513269196.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:16.655Z,1513269196.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:16.777Z,1513269196.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:17.055Z,1513269197.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:17.454Z,1513269197.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:17.573Z,1513269197.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:17.853Z,1513269197.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:18.251Z,1513269198.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:18.371Z,1513269198.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:18.650Z,1513269198.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:18.777Z,1513269198.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:19.100Z,1513269199.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:19.460Z,1513269199.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:19.573Z,1513269199.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:19.834Z,1513269199.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:20.260Z,1513269200.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:20.369Z,1513269200.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:20.667Z,1513269200.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:20.773Z,1513269200.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:21.063Z,1513269201.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:21.442Z,1513269201.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:21.569Z,1513269201.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:21.833Z,1513269201.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:22.276Z,1513269202.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:22.367Z,1513269202.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:22.635Z,1513269202.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:22.769Z,1513269202.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:23.040Z,1513269203.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:23.444Z,1513269203.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:23.565Z,1513269203.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:23.878Z,1513269203.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:24.248Z,1513269204.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:24.361Z,1513269204.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:24.636Z,1513269204.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:24.765Z,1513269204.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:25.035Z,1513269205.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:25.522Z,1513269205.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:25.561Z,1513269205.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:25.835Z,1513269205.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:26.243Z,1513269206.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:26.357Z,1513269206.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:26.647Z,1513269206.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:26.761Z,1513269206.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:27.044Z,1513269207.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:27.443Z,1513269207.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:27.557Z,1513269207.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:27.847Z,1513269207.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:28.234Z,1513269208.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:28.356Z,1513269208.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:28.671Z,1513269208.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:28.762Z,1513269208.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:29.039Z,1513269209.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:29.444Z,1513269209.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:29.557Z,1513269209.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:29.844Z,1513269209.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:30.250Z,1513269210.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:30.355Z,1513269210.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:30.648Z,1513269210.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:30.789Z,1513269210.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:31.045Z,1513269211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:31.438Z,1513269211.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:31.585Z,1513269211.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:31.895Z,1513269211.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:32.259Z,1513269212.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:32.383Z,1513269212.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:32.659Z,1513269212.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:32.789Z,1513269212.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:33.055Z,1513269213.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:33.438Z,1513269213.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:33.585Z,1513269213.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:33.889Z,1513269213.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:34.246Z,1513269214.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:34.381Z,1513269214.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:34.674Z,1513269214.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:34.785Z,1513269214.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:35.067Z,1513269215.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:35.449Z,1513269215.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:35.582Z,1513269215.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:35.848Z,1513269215.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:36.268Z,1513269216.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:36.379Z,1513269216.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:36.647Z,1513269216.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:36.785Z,1513269216.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:37.067Z,1513269217.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:37.449Z,1513269217.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:37.581Z,1513269217.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:37.859Z,1513269217.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:38.256Z,1513269218.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:38.378Z,1513269218.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:38.662Z,1513269218.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:38.783Z,1513269218.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:39.052Z,1513269219.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:39.431Z,1513269219.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:39.577Z,1513269219.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:39.828Z,1513269219.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:40.259Z,1513269220.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:40.373Z,1513269220.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:40.642Z,1513269220.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:40.777Z,1513269220.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:41.059Z,1513269221.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:41.573Z,1513269221.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:42.369Z,1513269222.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:42.773Z,1513269222.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:43.569Z,1513269223.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:44.367Z,1513269224.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:44.674Z,1513269224.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:44.843Z,1513269224.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:45.161Z,1513269225.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:45.226Z,1513269225.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:45.566Z,1513269225.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:45.592Z,1513269225.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:46.022Z,1513269226.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:46.363Z,1513269226.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:46.474Z,1513269226.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:46.790Z,1513269226.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:46.797Z,1513269226.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:47.201Z,1513269227.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:47.593Z,1513269227.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:47.611Z,1513269227.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:48.097Z,1513269228.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:48.389Z,1513269228.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:48.419Z,1513269228.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:48.786Z,1513269228.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:48.793Z,1513269228.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:49.222Z,1513269229.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:49.589Z,1513269229.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:49.603Z,1513269229.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:50.076Z,1513269230.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:50.385Z,1513269230.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:50.424Z,1513269230.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:50.789Z,1513269230.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:50.790Z,1513269230.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:51.193Z,1513269231.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:51.586Z,1513269231.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:51.608Z,1513269231.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:52.063Z,1513269232.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:52.382Z,1513269232.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:52.412Z,1513269232.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:52.783Z,1513269232.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:52.785Z,1513269232.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:53.203Z,1513269233.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:53.581Z,1513269233.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:53.611Z,1513269233.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:54.068Z,1513269234.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:54.378Z,1513269234.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:54.449Z,1513269234.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:54.781Z,1513269234.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:54.799Z,1513269234.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:55.207Z,1513269235.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:55.578Z,1513269235.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:55.605Z,1513269235.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:56.007Z,1513269236.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:56.373Z,1513269236.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:56.414Z,1513269236.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:56.777Z,1513269236.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:56.799Z,1513269236.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:57.202Z,1513269237.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:57.574Z,1513269237.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:57.638Z,1513269237.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:58.074Z,1513269238.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:58.370Z,1513269238.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:58.460Z,1513269238.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:58.788Z,1513269238.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:58.797Z,1513269238.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:59.203Z,1513269239.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:33:59.593Z,1513269239.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:33:59.633Z,1513269239.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:00.001Z,1513269240.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:00.389Z,1513269240.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:00.467Z,1513269240.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:00.801Z,1513269240.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:00.923Z,1513269240.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:01.205Z,1513269241.205 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:34:01.205Z,1513269241.205 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:34:01.206Z,1513269241.206 [BPC1](ERROR): Communications Fault
2017-12-14T16:34:01.223Z,1513269241.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:01.237Z,1513269241.237 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:34:01.597Z,1513269241.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:01.605Z,1513269241.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:02.087Z,1513269242.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:02.393Z,1513269242.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:02.427Z,1513269242.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:02.440Z,1513269242.440 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:34:02.440Z,1513269242.440 [BPC1] No Fault, FailCount= 1
2017-12-14T16:34:02.797Z,1513269242.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:02.858Z,1513269242.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:03.217Z,1513269243.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:03.593Z,1513269243.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:03.614Z,1513269243.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:04.080Z,1513269244.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:04.389Z,1513269244.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:04.398Z,1513269244.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:04.793Z,1513269244.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:04.796Z,1513269244.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:05.212Z,1513269245.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:05.590Z,1513269245.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:05.607Z,1513269245.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:06.087Z,1513269246.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:06.386Z,1513269246.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:06.399Z,1513269246.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:06.789Z,1513269246.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:06.796Z,1513269246.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:07.191Z,1513269247.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:07.585Z,1513269247.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:07.591Z,1513269247.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:08.054Z,1513269248.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:08.382Z,1513269248.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:08.404Z,1513269248.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:08.786Z,1513269248.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:08.801Z,1513269248.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:09.209Z,1513269249.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:09.581Z,1513269249.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:09.592Z,1513269249.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:09.988Z,1513269249.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:10.378Z,1513269250.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:10.448Z,1513269250.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:10.781Z,1513269250.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:10.791Z,1513269250.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:11.226Z,1513269251.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:11.578Z,1513269251.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:11.599Z,1513269251.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:11.994Z,1513269251.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:12.375Z,1513269252.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:12.486Z,1513269252.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:12.792Z,1513269252.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:12.829Z,1513269252.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:13.207Z,1513269253.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:13.633Z,1513269253.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:13.647Z,1513269253.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:14.018Z,1513269254.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:14.429Z,1513269254.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:14.465Z,1513269254.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:14.792Z,1513269254.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:14.835Z,1513269254.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:15.192Z,1513269255.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:15.592Z,1513269255.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:15.629Z,1513269255.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:16.087Z,1513269256.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:16.388Z,1513269256.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:16.426Z,1513269256.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:16.833Z,1513269256.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:16.838Z,1513269256.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:17.200Z,1513269257.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:17.601Z,1513269257.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:17.629Z,1513269257.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:18.085Z,1513269258.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:18.407Z,1513269258.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:18.426Z,1513269258.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:18.790Z,1513269258.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:18.829Z,1513269258.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:19.202Z,1513269259.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:19.600Z,1513269259.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:19.625Z,1513269259.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:20.106Z,1513269260.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:20.421Z,1513269260.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:20.423Z,1513269260.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:20.779Z,1513269260.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:20.825Z,1513269260.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:21.211Z,1513269261.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:21.608Z,1513269261.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:21.622Z,1513269261.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:22.076Z,1513269262.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:22.410Z,1513269262.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:22.417Z,1513269262.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:22.795Z,1513269262.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:22.821Z,1513269262.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:23.293Z,1513269263.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:23.617Z,1513269263.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:23.619Z,1513269263.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:24.027Z,1513269264.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:24.392Z,1513269264.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:24.413Z,1513269264.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:24.819Z,1513269264.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:24.833Z,1513269264.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:25.209Z,1513269265.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:25.598Z,1513269265.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:25.613Z,1513269265.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:26.007Z,1513269266.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:26.410Z,1513269266.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:26.459Z,1513269266.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:26.815Z,1513269266.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:26.830Z,1513269266.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:27.203Z,1513269267.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:27.597Z,1513269267.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:27.609Z,1513269267.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:27.996Z,1513269267.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:28.414Z,1513269268.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:28.479Z,1513269268.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:28.799Z,1513269268.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:28.839Z,1513269268.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:29.200Z,1513269269.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:29.607Z,1513269269.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:29.634Z,1513269269.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:30.066Z,1513269270.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:30.391Z,1513269270.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:30.430Z,1513269270.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:30.794Z,1513269270.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:30.835Z,1513269270.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:31.202Z,1513269271.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:31.601Z,1513269271.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:31.629Z,1513269271.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:32.080Z,1513269272.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:32.383Z,1513269272.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:32.425Z,1513269272.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:32.834Z,1513269272.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:32.836Z,1513269272.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:33.255Z,1513269273.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:33.612Z,1513269273.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:33.629Z,1513269273.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:34.076Z,1513269274.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:34.392Z,1513269274.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:34.427Z,1513269274.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:34.789Z,1513269274.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:34.829Z,1513269274.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:35.203Z,1513269275.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:35.600Z,1513269275.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:35.626Z,1513269275.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:36.101Z,1513269276.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:36.399Z,1513269276.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:36.422Z,1513269276.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:36.794Z,1513269276.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:36.825Z,1513269276.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:37.204Z,1513269277.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:37.610Z,1513269277.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:37.623Z,1513269277.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:38.004Z,1513269278.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:38.397Z,1513269278.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:38.417Z,1513269278.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:38.812Z,1513269278.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:38.821Z,1513269278.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:39.211Z,1513269279.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:39.593Z,1513269279.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:39.633Z,1513269279.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:39.999Z,1513269279.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:40.431Z,1513269280.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:40.454Z,1513269280.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:40.458Z,1513269280.458 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:34:40.458Z,1513269280.458 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:34:40.458Z,1513269280.458 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:34:40.458Z,1513269280.458 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:34:40.795Z,1513269280.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:40.799Z,1513269280.799 [Default:CheckIn:D] Stopped
2017-12-14T16:34:40.799Z,1513269280.799 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:34:40.841Z,1513269280.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:41.202Z,1513269281.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:41.206Z,1513269281.206 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 961.423503 min 
2017-12-14T16:34:41.207Z,1513269281.207 [Default:CheckIn:E] Stopped
2017-12-14T16:34:41.208Z,1513269281.208 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:34:41.208Z,1513269281.208 [Default:CheckIn] Stopped
2017-12-14T16:34:41.212Z,1513269281.212 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:34:41.213Z,1513269281.213 [Default:CheckIn](INFO): Running loop #93
2017-12-14T16:34:41.214Z,1513269281.214 [Default:CheckIn] Running Loop=93
2017-12-14T16:34:41.214Z,1513269281.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:34:41.214Z,1513269281.214 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:34:41.638Z,1513269281.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:42.434Z,1513269282.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:42.837Z,1513269282.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:43.635Z,1513269283.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:44.429Z,1513269284.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:44.738Z,1513269284.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:44.837Z,1513269284.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:44.871Z,1513269284.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:45.310Z,1513269285.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:45.634Z,1513269285.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:45.651Z,1513269285.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:46.100Z,1513269286.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:46.429Z,1513269286.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:46.479Z,1513269286.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:46.834Z,1513269286.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:46.858Z,1513269286.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:47.286Z,1513269287.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:47.629Z,1513269287.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:47.647Z,1513269287.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:48.075Z,1513269288.075 [PNI_TCM](ERROR): CRC does not match. Expected:0x39916 got:0x16850
2017-12-14T16:34:48.113Z,1513269288.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:48.426Z,1513269288.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:48.450Z,1513269288.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:48.834Z,1513269288.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:48.878Z,1513269288.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:49.265Z,1513269289.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:49.629Z,1513269289.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:49.662Z,1513269289.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:50.104Z,1513269290.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:50.433Z,1513269290.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:50.460Z,1513269290.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:50.837Z,1513269290.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:50.847Z,1513269290.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:51.250Z,1513269291.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:51.250Z,1513269291.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 320
2017-12-14T16:34:51.250Z,1513269291.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:34:51.252Z,1513269291.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:51.252Z,1513269291.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 320
2017-12-14T16:34:51.252Z,1513269291.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:34:51.254Z,1513269291.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:51.254Z,1513269291.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 320
2017-12-14T16:34:51.254Z,1513269291.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:34:51.266Z,1513269291.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:34:51.266Z,1513269291.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:34:51.267Z,1513269291.267 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:34:51.635Z,1513269291.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:51.641Z,1513269291.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:34:51.641Z,1513269291.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 320
2017-12-14T16:34:51.642Z,1513269291.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:34:51.642Z,1513269291.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 320
2017-12-14T16:34:51.642Z,1513269291.642 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:34:51.642Z,1513269291.642 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 320
2017-12-14T16:34:52.127Z,1513269292.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:34:52.127Z,1513269292.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:34:52.128Z,1513269292.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:34:52.128Z,1513269292.128 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:34:52.128Z,1513269292.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:34:52.141Z,1513269292.141 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:34:52.141Z,1513269292.141 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:34:52.142Z,1513269292.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:34:52.142Z,1513269292.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:34:52.430Z,1513269292.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:52.471Z,1513269292.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:52.833Z,1513269292.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:52.860Z,1513269292.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:53.238Z,1513269293.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:53.629Z,1513269293.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:53.636Z,1513269293.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:54.034Z,1513269294.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:54.426Z,1513269294.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:54.470Z,1513269294.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:54.830Z,1513269294.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:54.841Z,1513269294.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:55.240Z,1513269295.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:55.625Z,1513269295.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:55.672Z,1513269295.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:56.056Z,1513269296.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:56.422Z,1513269296.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:56.471Z,1513269296.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:56.826Z,1513269296.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:56.834Z,1513269296.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:57.230Z,1513269297.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:57.621Z,1513269297.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:57.636Z,1513269297.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:58.091Z,1513269298.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:58.419Z,1513269298.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:58.488Z,1513269298.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:58.829Z,1513269298.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:58.851Z,1513269298.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:59.255Z,1513269299.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:34:59.626Z,1513269299.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:34:59.644Z,1513269299.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:00.110Z,1513269300.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:00.421Z,1513269300.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:00.433Z,1513269300.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:00.826Z,1513269300.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:00.856Z,1513269300.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:01.246Z,1513269301.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:01.623Z,1513269301.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:01.676Z,1513269301.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:02.105Z,1513269302.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:02.417Z,1513269302.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:02.455Z,1513269302.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:02.821Z,1513269302.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:02.841Z,1513269302.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:03.238Z,1513269303.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:03.618Z,1513269303.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:03.646Z,1513269303.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:04.095Z,1513269304.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:04.414Z,1513269304.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:04.456Z,1513269304.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:04.820Z,1513269304.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:04.863Z,1513269304.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:05.251Z,1513269305.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:05.617Z,1513269305.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:05.655Z,1513269305.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:06.030Z,1513269306.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:06.413Z,1513269306.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:06.446Z,1513269306.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:06.817Z,1513269306.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:06.840Z,1513269306.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:07.255Z,1513269307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:07.628Z,1513269307.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:07.718Z,1513269307.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:08.081Z,1513269308.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:08.422Z,1513269308.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:08.483Z,1513269308.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:08.825Z,1513269308.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:08.854Z,1513269308.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:09.259Z,1513269309.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:09.622Z,1513269309.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:09.650Z,1513269309.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:10.024Z,1513269310.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:10.419Z,1513269310.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:10.469Z,1513269310.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:10.821Z,1513269310.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:10.844Z,1513269310.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:11.259Z,1513269311.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:11.617Z,1513269311.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:11.630Z,1513269311.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:12.084Z,1513269312.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:12.413Z,1513269312.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:12.458Z,1513269312.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:12.819Z,1513269312.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:12.846Z,1513269312.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:13.251Z,1513269313.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:13.614Z,1513269313.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:13.647Z,1513269313.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:14.104Z,1513269314.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:14.410Z,1513269314.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:14.464Z,1513269314.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:14.815Z,1513269314.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:14.845Z,1513269314.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:15.258Z,1513269315.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:15.609Z,1513269315.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:15.623Z,1513269315.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:16.083Z,1513269316.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:16.415Z,1513269316.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:16.452Z,1513269316.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:16.822Z,1513269316.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:16.851Z,1513269316.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:17.245Z,1513269317.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:17.619Z,1513269317.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:17.691Z,1513269317.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:18.098Z,1513269318.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:18.413Z,1513269318.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:18.456Z,1513269318.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:18.817Z,1513269318.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:18.825Z,1513269318.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:19.246Z,1513269319.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:19.619Z,1513269319.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:19.655Z,1513269319.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:20.107Z,1513269320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:20.413Z,1513269320.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:20.446Z,1513269320.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:20.820Z,1513269320.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:20.855Z,1513269320.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:21.241Z,1513269321.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:21.613Z,1513269321.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:21.650Z,1513269321.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:22.017Z,1513269322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:22.410Z,1513269322.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:22.477Z,1513269322.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:22.815Z,1513269322.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:22.860Z,1513269322.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:23.262Z,1513269323.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:23.610Z,1513269323.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:23.628Z,1513269323.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:24.068Z,1513269324.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:24.406Z,1513269324.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:24.479Z,1513269324.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:24.817Z,1513269324.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:24.863Z,1513269324.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:25.261Z,1513269325.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:25.614Z,1513269325.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:25.660Z,1513269325.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:26.112Z,1513269326.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:26.409Z,1513269326.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:26.460Z,1513269326.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:26.813Z,1513269326.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:26.819Z,1513269326.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:27.272Z,1513269327.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:27.612Z,1513269327.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:27.651Z,1513269327.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:28.108Z,1513269328.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:28.406Z,1513269328.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:28.448Z,1513269328.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:28.844Z,1513269328.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:29.211Z,1513269329.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:29.269Z,1513269329.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:29.706Z,1513269329.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:30.007Z,1513269330.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:30.102Z,1513269330.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:30.469Z,1513269330.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:30.523Z,1513269330.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:30.831Z,1513269330.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:31.251Z,1513269331.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:31.265Z,1513269331.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:31.639Z,1513269331.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:32.061Z,1513269332.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:32.095Z,1513269332.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:32.443Z,1513269332.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:32.473Z,1513269332.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:32.826Z,1513269332.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:33.241Z,1513269333.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:33.270Z,1513269333.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:33.646Z,1513269333.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:34.031Z,1513269334.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:34.067Z,1513269334.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:34.478Z,1513269334.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:34.509Z,1513269334.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:34.838Z,1513269334.838 [PNI_TCM](ERROR): CRC does not match. Expected:0x25804 got:0x128
2017-12-14T16:35:34.855Z,1513269334.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:35.245Z,1513269335.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:35.305Z,1513269335.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:35.633Z,1513269335.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:36.032Z,1513269336.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:36.101Z,1513269336.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:36.464Z,1513269336.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:36.778Z,1513269336.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:36.885Z,1513269336.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:37.251Z,1513269337.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:37.573Z,1513269337.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:37.650Z,1513269337.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:38.056Z,1513269338.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:38.389Z,1513269338.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:38.473Z,1513269338.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:38.793Z,1513269338.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:38.832Z,1513269338.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:39.258Z,1513269339.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:39.589Z,1513269339.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:39.663Z,1513269339.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:40.118Z,1513269340.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:40.385Z,1513269340.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:40.450Z,1513269340.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:40.789Z,1513269340.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:40.855Z,1513269340.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:41.253Z,1513269341.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:41.585Z,1513269341.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:42.381Z,1513269342.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:42.785Z,1513269342.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:43.581Z,1513269343.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:44.377Z,1513269344.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:44.740Z,1513269344.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:44.781Z,1513269344.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:44.854Z,1513269344.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:45.232Z,1513269345.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:45.577Z,1513269345.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:45.649Z,1513269345.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:46.103Z,1513269346.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:46.373Z,1513269346.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:46.461Z,1513269346.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:46.778Z,1513269346.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:46.842Z,1513269346.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:47.249Z,1513269347.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:47.573Z,1513269347.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:47.618Z,1513269347.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:48.071Z,1513269348.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:48.370Z,1513269348.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:48.436Z,1513269348.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:48.776Z,1513269348.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:48.847Z,1513269348.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:49.218Z,1513269349.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:49.569Z,1513269349.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:49.651Z,1513269349.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:50.041Z,1513269350.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:50.367Z,1513269350.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:50.477Z,1513269350.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:50.806Z,1513269350.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:50.833Z,1513269350.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:51.234Z,1513269351.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:51.601Z,1513269351.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:51.700Z,1513269351.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:52.015Z,1513269352.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:52.397Z,1513269352.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:52.484Z,1513269352.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:52.810Z,1513269352.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:52.854Z,1513269352.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:53.273Z,1513269353.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:53.605Z,1513269353.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:53.649Z,1513269353.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:54.077Z,1513269354.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:54.401Z,1513269354.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:54.435Z,1513269354.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:54.852Z,1513269354.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:55.182Z,1513269355.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:55.256Z,1513269355.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:55.614Z,1513269355.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:56.029Z,1513269356.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:56.098Z,1513269356.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:56.443Z,1513269356.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:56.477Z,1513269356.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:56.849Z,1513269356.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:57.217Z,1513269357.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:57.273Z,1513269357.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:57.626Z,1513269357.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:58.070Z,1513269358.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:58.094Z,1513269358.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:58.420Z,1513269358.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:58.473Z,1513269358.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:58.819Z,1513269358.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:59.233Z,1513269359.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:35:59.269Z,1513269359.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:35:59.644Z,1513269359.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:00.065Z,1513269360.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:00.088Z,1513269360.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:00.443Z,1513269360.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:00.473Z,1513269360.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:00.812Z,1513269360.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:01.225Z,1513269361.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:01.269Z,1513269361.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:01.659Z,1513269361.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:02.019Z,1513269362.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:02.067Z,1513269362.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:02.463Z,1513269362.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:02.505Z,1513269362.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:02.847Z,1513269362.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:03.248Z,1513269363.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:03.313Z,1513269363.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:03.625Z,1513269363.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:04.030Z,1513269364.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:04.109Z,1513269364.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:04.475Z,1513269364.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:04.817Z,1513269364.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:04.822Z,1513269364.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:05.240Z,1513269365.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:05.614Z,1513269365.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:05.682Z,1513269365.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:06.043Z,1513269366.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:06.410Z,1513269366.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:06.458Z,1513269366.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x46522 got:0x6591
2017-12-14T16:36:06.487Z,1513269366.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:06.813Z,1513269366.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:06.850Z,1513269366.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:07.212Z,1513269367.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:07.611Z,1513269367.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:07.627Z,1513269367.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:08.080Z,1513269368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:08.405Z,1513269368.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:08.454Z,1513269368.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:08.809Z,1513269368.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:08.849Z,1513269368.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:09.254Z,1513269369.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:09.617Z,1513269369.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:09.650Z,1513269369.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:10.137Z,1513269370.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:10.414Z,1513269370.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:10.436Z,1513269370.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:10.817Z,1513269370.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:10.825Z,1513269370.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:11.231Z,1513269371.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:11.613Z,1513269371.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:11.646Z,1513269371.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:12.076Z,1513269372.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:12.411Z,1513269372.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:12.468Z,1513269372.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:12.817Z,1513269372.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:12.859Z,1513269372.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:13.213Z,1513269373.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:13.613Z,1513269373.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:13.671Z,1513269373.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:14.090Z,1513269374.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:14.410Z,1513269374.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:14.471Z,1513269374.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:14.813Z,1513269374.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:14.840Z,1513269374.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:15.273Z,1513269375.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:15.610Z,1513269375.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:15.644Z,1513269375.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:16.094Z,1513269376.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:16.405Z,1513269376.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:16.415Z,1513269376.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:16.809Z,1513269376.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:16.813Z,1513269376.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:17.224Z,1513269377.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:17.605Z,1513269377.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:17.621Z,1513269377.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:18.020Z,1513269378.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:18.402Z,1513269378.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:18.466Z,1513269378.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:18.807Z,1513269378.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:18.906Z,1513269378.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:19.232Z,1513269379.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:19.604Z,1513269379.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:19.622Z,1513269379.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:20.038Z,1513269380.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:20.397Z,1513269380.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:20.475Z,1513269380.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:20.833Z,1513269380.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:20.871Z,1513269380.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:21.267Z,1513269381.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:21.629Z,1513269381.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:21.647Z,1513269381.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:22.130Z,1513269382.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:22.425Z,1513269382.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:22.468Z,1513269382.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:22.831Z,1513269382.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:22.870Z,1513269382.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:23.314Z,1513269383.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:23.629Z,1513269383.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:23.637Z,1513269383.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:24.091Z,1513269384.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:24.426Z,1513269384.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:24.460Z,1513269384.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:24.831Z,1513269384.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:24.833Z,1513269384.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:25.243Z,1513269385.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:25.639Z,1513269385.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:25.663Z,1513269385.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:26.111Z,1513269386.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:26.434Z,1513269386.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:26.527Z,1513269386.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:26.837Z,1513269386.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:26.840Z,1513269386.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:27.240Z,1513269387.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:27.635Z,1513269387.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:27.658Z,1513269387.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:28.107Z,1513269388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:28.429Z,1513269388.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:28.491Z,1513269388.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:28.802Z,1513269388.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:28.833Z,1513269388.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:29.212Z,1513269389.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:29.627Z,1513269389.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:29.630Z,1513269389.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:30.074Z,1513269390.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:30.425Z,1513269390.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:30.478Z,1513269390.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:30.830Z,1513269390.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:30.839Z,1513269390.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:31.246Z,1513269391.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:31.625Z,1513269391.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:31.652Z,1513269391.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:32.055Z,1513269392.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:32.422Z,1513269392.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:32.491Z,1513269392.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:32.842Z,1513269392.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:32.864Z,1513269392.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:33.224Z,1513269393.224 [PNI_TCM](ERROR): CRC does not match. Expected:0x2514 got:0x116
2017-12-14T16:36:33.263Z,1513269393.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:33.616Z,1513269393.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:33.639Z,1513269393.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:34.071Z,1513269394.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:34.433Z,1513269394.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:34.482Z,1513269394.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:34.845Z,1513269394.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:34.854Z,1513269394.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:35.321Z,1513269395.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:35.642Z,1513269395.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:35.724Z,1513269395.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:36.148Z,1513269396.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:36.438Z,1513269396.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:36.505Z,1513269396.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:36.843Z,1513269396.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:36.867Z,1513269396.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:37.267Z,1513269397.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:37.637Z,1513269397.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:37.668Z,1513269397.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:38.098Z,1513269398.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:38.432Z,1513269398.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:38.433Z,1513269398.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:38.841Z,1513269398.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:38.855Z,1513269398.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:39.259Z,1513269399.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:39.642Z,1513269399.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:39.662Z,1513269399.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:40.084Z,1513269400.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x22713 got:0x49061
2017-12-14T16:36:40.131Z,1513269400.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:40.438Z,1513269400.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:40.448Z,1513269400.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:40.839Z,1513269400.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:40.841Z,1513269400.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:41.247Z,1513269401.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:41.643Z,1513269401.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:41.660Z,1513269401.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:42.438Z,1513269402.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:42.841Z,1513269402.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:43.637Z,1513269403.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:44.433Z,1513269404.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:44.843Z,1513269404.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:45.637Z,1513269405.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:46.434Z,1513269406.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:46.845Z,1513269406.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:47.642Z,1513269407.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:48.438Z,1513269408.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:48.807Z,1513269408.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:48.841Z,1513269408.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:48.999Z,1513269408.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:49.356Z,1513269409.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:49.639Z,1513269409.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:49.755Z,1513269409.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:50.163Z,1513269410.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:50.434Z,1513269410.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:50.555Z,1513269410.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:50.837Z,1513269410.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:50.960Z,1513269410.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:51.331Z,1513269411.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:51.635Z,1513269411.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:51.763Z,1513269411.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:52.212Z,1513269412.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:52.430Z,1513269412.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:52.562Z,1513269412.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:52.834Z,1513269412.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:52.943Z,1513269412.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:53.390Z,1513269413.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:53.630Z,1513269413.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:53.766Z,1513269413.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:54.175Z,1513269414.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:54.425Z,1513269414.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:54.526Z,1513269414.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:54.830Z,1513269414.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:54.954Z,1513269414.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:55.323Z,1513269415.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:55.625Z,1513269415.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:55.724Z,1513269415.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:56.127Z,1513269416.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:56.421Z,1513269416.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:56.530Z,1513269416.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:56.826Z,1513269416.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:56.938Z,1513269416.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:57.343Z,1513269417.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:57.621Z,1513269417.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:57.735Z,1513269417.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:58.168Z,1513269418.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:58.419Z,1513269418.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:58.566Z,1513269418.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:58.829Z,1513269418.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:58.919Z,1513269418.919 [BPC1](ERROR): Failed to parse message.
2017-12-14T16:36:58.919Z,1513269418.919 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T16:36:58.920Z,1513269418.920 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:36:58.920Z,1513269418.920 [BPC1](ERROR): Data Fault
2017-12-14T16:36:58.953Z,1513269418.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:58.979Z,1513269418.979 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:36:59.348Z,1513269419.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:36:59.626Z,1513269419.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:36:59.728Z,1513269419.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:00.152Z,1513269420.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:00.165Z,1513269420.165 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:37:00.165Z,1513269420.165 [BPC1] No Fault, FailCount= 1
2017-12-14T16:37:00.421Z,1513269420.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:00.583Z,1513269420.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:00.825Z,1513269420.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:00.926Z,1513269420.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:01.327Z,1513269421.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:01.622Z,1513269421.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:01.778Z,1513269421.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:02.139Z,1513269422.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:02.418Z,1513269422.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:02.543Z,1513269422.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:02.821Z,1513269422.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:02.936Z,1513269422.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:03.335Z,1513269423.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:03.617Z,1513269423.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:03.731Z,1513269423.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:04.124Z,1513269424.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:04.413Z,1513269424.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:04.526Z,1513269424.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:04.819Z,1513269424.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:04.969Z,1513269424.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:05.336Z,1513269425.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:05.613Z,1513269425.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:05.739Z,1513269425.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:06.136Z,1513269426.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:06.410Z,1513269426.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:06.528Z,1513269426.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:06.815Z,1513269426.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:06.931Z,1513269426.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:07.321Z,1513269427.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:07.611Z,1513269427.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:07.730Z,1513269427.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:08.184Z,1513269428.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:08.407Z,1513269428.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:08.546Z,1513269428.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:08.825Z,1513269428.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:08.972Z,1513269428.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:09.336Z,1513269429.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:09.623Z,1513269429.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:09.734Z,1513269429.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:10.139Z,1513269430.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:10.417Z,1513269430.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:10.529Z,1513269430.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:10.821Z,1513269430.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:10.934Z,1513269430.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:11.386Z,1513269431.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:11.617Z,1513269431.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:11.738Z,1513269431.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:12.150Z,1513269432.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:12.417Z,1513269432.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:12.536Z,1513269432.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:12.822Z,1513269432.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:12.940Z,1513269432.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:13.339Z,1513269433.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:13.619Z,1513269433.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:13.738Z,1513269433.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:14.141Z,1513269434.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:14.414Z,1513269434.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:14.572Z,1513269434.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:14.821Z,1513269434.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:14.952Z,1513269434.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:15.350Z,1513269435.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:15.617Z,1513269435.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:15.722Z,1513269435.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:16.124Z,1513269436.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:16.415Z,1513269436.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:16.525Z,1513269436.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:16.817Z,1513269436.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:16.931Z,1513269436.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:17.343Z,1513269437.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:17.614Z,1513269437.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:17.764Z,1513269437.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:18.132Z,1513269438.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:18.409Z,1513269438.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:18.529Z,1513269438.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:18.813Z,1513269438.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:18.934Z,1513269438.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:19.331Z,1513269439.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:19.615Z,1513269439.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:19.758Z,1513269439.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:20.147Z,1513269440.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:20.414Z,1513269440.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:20.549Z,1513269440.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:20.819Z,1513269440.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:20.952Z,1513269440.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:21.371Z,1513269441.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:21.613Z,1513269441.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:21.726Z,1513269441.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:22.124Z,1513269442.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:22.409Z,1513269442.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:22.558Z,1513269442.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:22.814Z,1513269442.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:22.942Z,1513269442.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:23.367Z,1513269443.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:23.609Z,1513269443.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:23.732Z,1513269443.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:24.187Z,1513269444.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:24.406Z,1513269444.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:24.535Z,1513269444.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:24.817Z,1513269444.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:24.927Z,1513269444.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:25.339Z,1513269445.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:25.613Z,1513269445.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:25.729Z,1513269445.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:26.169Z,1513269446.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:26.409Z,1513269446.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:26.545Z,1513269446.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:26.813Z,1513269446.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:26.945Z,1513269446.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:27.387Z,1513269447.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:27.615Z,1513269447.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:27.730Z,1513269447.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:28.129Z,1513269448.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:28.410Z,1513269448.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:28.535Z,1513269448.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:28.813Z,1513269448.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:28.935Z,1513269448.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:29.341Z,1513269449.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:29.609Z,1513269449.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:29.743Z,1513269449.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:30.135Z,1513269450.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:30.406Z,1513269450.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:30.585Z,1513269450.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:30.811Z,1513269450.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:30.935Z,1513269450.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:31.334Z,1513269451.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:31.605Z,1513269451.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:31.744Z,1513269451.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:32.133Z,1513269452.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:32.401Z,1513269452.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:32.541Z,1513269452.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:32.805Z,1513269452.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:32.938Z,1513269452.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:33.343Z,1513269453.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:33.601Z,1513269453.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:33.742Z,1513269453.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:34.117Z,1513269454.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:34.397Z,1513269454.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:34.519Z,1513269454.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:34.801Z,1513269454.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:34.923Z,1513269454.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:35.350Z,1513269455.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:35.597Z,1513269455.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:35.748Z,1513269455.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:36.151Z,1513269456.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:36.393Z,1513269456.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:36.527Z,1513269456.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:36.797Z,1513269456.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:36.957Z,1513269456.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:37.351Z,1513269457.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:37.593Z,1513269457.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:37.724Z,1513269457.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:38.127Z,1513269458.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:38.389Z,1513269458.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:38.525Z,1513269458.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:38.793Z,1513269458.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:38.957Z,1513269458.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:39.355Z,1513269459.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:39.589Z,1513269459.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:39.729Z,1513269459.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:40.213Z,1513269460.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:40.385Z,1513269460.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:40.531Z,1513269460.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:40.789Z,1513269460.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:40.931Z,1513269460.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:41.332Z,1513269461.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:41.585Z,1513269461.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:41.732Z,1513269461.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:42.381Z,1513269462.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:42.785Z,1513269462.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:43.581Z,1513269463.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:44.379Z,1513269464.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:44.785Z,1513269464.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:45.306Z,1513269465.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:45.447Z,1513269465.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:45.581Z,1513269465.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:45.815Z,1513269465.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:46.187Z,1513269466.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:46.377Z,1513269466.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:46.644Z,1513269466.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:46.781Z,1513269466.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:46.991Z,1513269466.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:47.388Z,1513269467.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:47.578Z,1513269467.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:47.789Z,1513269467.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:48.187Z,1513269468.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:48.373Z,1513269468.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:48.588Z,1513269468.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:48.777Z,1513269468.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:48.980Z,1513269468.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:49.380Z,1513269469.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:49.574Z,1513269469.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:49.801Z,1513269469.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:50.200Z,1513269470.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:50.372Z,1513269470.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:50.592Z,1513269470.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:50.777Z,1513269470.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:50.999Z,1513269470.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:51.371Z,1513269471.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:51.574Z,1513269471.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:51.796Z,1513269471.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:52.198Z,1513269472.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:52.198Z,1513269472.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 321
2017-12-14T16:37:52.198Z,1513269472.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:37:52.200Z,1513269472.200 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:52.200Z,1513269472.200 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 321
2017-12-14T16:37:52.200Z,1513269472.200 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:37:52.203Z,1513269472.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:52.203Z,1513269472.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 321
2017-12-14T16:37:52.203Z,1513269472.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:37:52.215Z,1513269472.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:37:52.215Z,1513269472.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:37:52.215Z,1513269472.215 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:37:52.369Z,1513269472.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:52.613Z,1513269472.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:37:52.613Z,1513269472.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 321
2017-12-14T16:37:52.613Z,1513269472.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:37:52.613Z,1513269472.613 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 321
2017-12-14T16:37:52.614Z,1513269472.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:37:52.614Z,1513269472.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 321
2017-12-14T16:37:52.773Z,1513269472.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:53.010Z,1513269473.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:37:53.010Z,1513269473.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:37:53.011Z,1513269473.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:37:53.011Z,1513269473.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:37:53.012Z,1513269473.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:37:53.012Z,1513269473.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:37:53.012Z,1513269473.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:37:53.017Z,1513269473.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:37:53.017Z,1513269473.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:37:53.387Z,1513269473.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:53.570Z,1513269473.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:53.775Z,1513269473.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:54.215Z,1513269474.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:54.365Z,1513269474.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:54.583Z,1513269474.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:54.769Z,1513269474.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:55.019Z,1513269475.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:55.385Z,1513269475.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:55.565Z,1513269475.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:55.779Z,1513269475.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:56.216Z,1513269476.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:56.363Z,1513269476.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:56.584Z,1513269476.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:56.789Z,1513269476.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:57.092Z,1513269477.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:57.385Z,1513269477.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:57.585Z,1513269477.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:57.786Z,1513269477.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:58.196Z,1513269478.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:58.382Z,1513269478.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:58.595Z,1513269478.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:58.785Z,1513269478.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:58.995Z,1513269478.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:59.390Z,1513269479.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:37:59.581Z,1513269479.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:37:59.785Z,1513269479.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:00.190Z,1513269480.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:00.377Z,1513269480.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:00.604Z,1513269480.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:00.781Z,1513269480.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:00.999Z,1513269480.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:01.387Z,1513269481.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:01.577Z,1513269481.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:01.782Z,1513269481.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:02.192Z,1513269482.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:02.373Z,1513269482.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:02.604Z,1513269482.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:02.777Z,1513269482.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:03.016Z,1513269483.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:03.374Z,1513269483.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:03.573Z,1513269483.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:03.771Z,1513269483.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:04.200Z,1513269484.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:04.369Z,1513269484.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:04.603Z,1513269484.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:04.773Z,1513269484.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:04.999Z,1513269484.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:05.402Z,1513269485.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:05.569Z,1513269485.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:05.888Z,1513269485.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:06.192Z,1513269486.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:06.366Z,1513269486.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:06.638Z,1513269486.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:06.769Z,1513269486.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:06.991Z,1513269486.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:07.386Z,1513269487.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:07.565Z,1513269487.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:07.819Z,1513269487.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:08.203Z,1513269488.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:08.361Z,1513269488.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:08.627Z,1513269488.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:08.766Z,1513269488.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:09.032Z,1513269489.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:09.388Z,1513269489.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:09.561Z,1513269489.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:09.794Z,1513269489.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:10.207Z,1513269490.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:10.362Z,1513269490.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:10.599Z,1513269490.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:10.769Z,1513269490.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:11.007Z,1513269491.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:11.370Z,1513269491.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:11.565Z,1513269491.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:11.775Z,1513269491.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:12.215Z,1513269492.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:12.363Z,1513269492.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:12.608Z,1513269492.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:12.785Z,1513269492.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:13.008Z,1513269493.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:13.384Z,1513269493.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:13.581Z,1513269493.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:13.775Z,1513269493.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:14.184Z,1513269494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:14.377Z,1513269494.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:14.606Z,1513269494.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:14.781Z,1513269494.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:15.007Z,1513269495.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:15.384Z,1513269495.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:15.578Z,1513269495.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:15.783Z,1513269495.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:16.184Z,1513269496.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:16.373Z,1513269496.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:16.592Z,1513269496.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:16.777Z,1513269496.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:17.019Z,1513269497.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:17.391Z,1513269497.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:17.573Z,1513269497.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:17.776Z,1513269497.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:18.187Z,1513269498.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:18.369Z,1513269498.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:18.620Z,1513269498.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:18.773Z,1513269498.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:19.027Z,1513269499.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:19.379Z,1513269499.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:19.569Z,1513269499.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:19.784Z,1513269499.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:20.189Z,1513269500.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:20.365Z,1513269500.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:20.596Z,1513269500.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:20.769Z,1513269500.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:20.995Z,1513269500.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:21.380Z,1513269501.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:21.565Z,1513269501.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:21.818Z,1513269501.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:22.207Z,1513269502.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:22.361Z,1513269502.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:22.607Z,1513269502.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:22.765Z,1513269502.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:23.003Z,1513269503.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:23.374Z,1513269503.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:23.561Z,1513269503.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:23.799Z,1513269503.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:24.200Z,1513269504.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:24.360Z,1513269504.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:24.600Z,1513269504.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:24.769Z,1513269504.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:25.057Z,1513269505.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:25.380Z,1513269505.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:25.565Z,1513269505.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:25.805Z,1513269505.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:26.180Z,1513269506.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:26.364Z,1513269506.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:26.605Z,1513269506.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:26.788Z,1513269506.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:26.977Z,1513269506.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:27.404Z,1513269507.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:27.585Z,1513269507.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:27.805Z,1513269507.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:28.306Z,1513269508.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:28.382Z,1513269508.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:28.580Z,1513269508.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:28.785Z,1513269508.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:29.026Z,1513269509.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:29.389Z,1513269509.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:29.581Z,1513269509.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:29.819Z,1513269509.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:30.191Z,1513269510.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:30.377Z,1513269510.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:30.622Z,1513269510.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:30.781Z,1513269510.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:31.016Z,1513269511.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:31.398Z,1513269511.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:31.577Z,1513269511.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:31.793Z,1513269511.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:32.190Z,1513269512.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:32.373Z,1513269512.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:32.603Z,1513269512.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:32.777Z,1513269512.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:32.998Z,1513269512.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:33.387Z,1513269513.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:33.573Z,1513269513.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:33.782Z,1513269513.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:34.203Z,1513269514.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:34.369Z,1513269514.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:34.634Z,1513269514.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:34.773Z,1513269514.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:35.003Z,1513269515.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:35.385Z,1513269515.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:35.569Z,1513269515.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:35.780Z,1513269515.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:36.187Z,1513269516.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:36.365Z,1513269516.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:36.600Z,1513269516.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:36.769Z,1513269516.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:37.003Z,1513269517.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:37.384Z,1513269517.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:37.565Z,1513269517.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:37.841Z,1513269517.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:38.189Z,1513269518.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:38.363Z,1513269518.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:38.604Z,1513269518.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:38.781Z,1513269518.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:39.035Z,1513269519.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:39.385Z,1513269519.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:39.577Z,1513269519.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:39.787Z,1513269519.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:40.200Z,1513269520.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:40.375Z,1513269520.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:40.600Z,1513269520.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:40.785Z,1513269520.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:41.025Z,1513269521.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:41.392Z,1513269521.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:41.581Z,1513269521.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:41.788Z,1513269521.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:42.377Z,1513269522.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:42.781Z,1513269522.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:43.577Z,1513269523.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:44.373Z,1513269524.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:44.777Z,1513269524.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:45.204Z,1513269525.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:45.335Z,1513269525.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:45.573Z,1513269525.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:45.732Z,1513269525.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:46.112Z,1513269526.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:46.371Z,1513269526.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:46.513Z,1513269526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:46.777Z,1513269526.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:46.910Z,1513269526.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:47.316Z,1513269527.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:47.573Z,1513269527.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:47.721Z,1513269527.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:48.117Z,1513269528.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:48.369Z,1513269528.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:48.516Z,1513269528.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:48.773Z,1513269528.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:48.908Z,1513269528.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:49.308Z,1513269529.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:49.569Z,1513269529.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:49.755Z,1513269529.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:50.159Z,1513269530.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:50.365Z,1513269530.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:50.528Z,1513269530.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:50.769Z,1513269530.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:50.940Z,1513269530.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:51.323Z,1513269531.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:51.565Z,1513269531.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:51.731Z,1513269531.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:52.101Z,1513269532.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:52.363Z,1513269532.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:52.546Z,1513269532.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:52.789Z,1513269532.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:52.900Z,1513269532.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:53.327Z,1513269533.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:53.585Z,1513269533.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:53.780Z,1513269533.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:54.127Z,1513269534.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:54.382Z,1513269534.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:54.528Z,1513269534.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:54.785Z,1513269534.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:54.931Z,1513269534.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:55.302Z,1513269535.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:55.581Z,1513269535.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:55.702Z,1513269535.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:56.108Z,1513269536.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:56.377Z,1513269536.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:56.524Z,1513269536.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:56.781Z,1513269536.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:56.994Z,1513269536.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:57.316Z,1513269537.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:57.577Z,1513269537.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:57.706Z,1513269537.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:58.112Z,1513269538.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:58.375Z,1513269538.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:58.515Z,1513269538.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:58.781Z,1513269538.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:58.915Z,1513269538.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:59.316Z,1513269539.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:38:59.580Z,1513269539.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:38:59.723Z,1513269539.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:00.201Z,1513269540.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:00.373Z,1513269540.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:00.514Z,1513269540.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:00.777Z,1513269540.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:00.948Z,1513269540.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:01.319Z,1513269541.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:01.573Z,1513269541.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:01.711Z,1513269541.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:02.122Z,1513269542.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:02.369Z,1513269542.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:02.526Z,1513269542.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:02.773Z,1513269542.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:02.926Z,1513269542.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:03.333Z,1513269543.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:03.569Z,1513269543.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:03.703Z,1513269543.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:04.140Z,1513269544.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:04.366Z,1513269544.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:04.521Z,1513269544.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:04.769Z,1513269544.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:04.912Z,1513269544.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:05.267Z,1513269545.267 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T16:39:05.267Z,1513269545.267 [NAL9602] Data Fault, FailCount= 3
2017-12-14T16:39:05.267Z,1513269545.267 [NAL9602](ERROR): Data Fault
2017-12-14T16:39:05.320Z,1513269545.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:05.342Z,1513269545.342 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T16:39:05.565Z,1513269545.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:05.678Z,1513269545.678 [NAL9602](INFO): Powering down
2017-12-14T16:39:05.725Z,1513269545.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:06.108Z,1513269546.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:06.363Z,1513269546.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:06.575Z,1513269546.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:06.622Z,1513269546.622 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T16:39:06.622Z,1513269546.622 [NAL9602] No Fault, FailCount= 3
2017-12-14T16:39:06.769Z,1513269546.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:06.906Z,1513269546.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:07.307Z,1513269547.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:07.569Z,1513269547.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:07.702Z,1513269547.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:08.107Z,1513269548.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:08.372Z,1513269548.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:08.507Z,1513269548.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:08.785Z,1513269548.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:08.907Z,1513269548.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:09.305Z,1513269549.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:09.582Z,1513269549.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:09.734Z,1513269549.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:10.115Z,1513269550.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:10.377Z,1513269550.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:10.499Z,1513269550.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:10.920Z,1513269550.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:11.318Z,1513269551.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:11.715Z,1513269551.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:12.122Z,1513269552.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:12.528Z,1513269552.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:12.914Z,1513269552.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:13.314Z,1513269553.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:13.727Z,1513269553.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:14.112Z,1513269554.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:14.566Z,1513269554.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:14.914Z,1513269554.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:15.316Z,1513269555.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:15.725Z,1513269555.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:16.104Z,1513269556.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:16.503Z,1513269556.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:16.905Z,1513269556.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:17.311Z,1513269557.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:17.706Z,1513269557.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:18.163Z,1513269558.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:18.523Z,1513269558.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:18.910Z,1513269558.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:19.315Z,1513269559.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:19.711Z,1513269559.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:20.148Z,1513269560.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:20.516Z,1513269560.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:20.920Z,1513269560.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:21.310Z,1513269561.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:21.570Z,1513269561.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:21.714Z,1513269561.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:22.111Z,1513269562.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:22.367Z,1513269562.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:22.514Z,1513269562.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:22.778Z,1513269562.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:22.936Z,1513269562.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:23.390Z,1513269563.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:23.573Z,1513269563.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:23.710Z,1513269563.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:24.117Z,1513269564.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:24.369Z,1513269564.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:24.523Z,1513269564.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:24.773Z,1513269564.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:24.914Z,1513269564.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:25.318Z,1513269565.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:25.714Z,1513269565.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:26.126Z,1513269566.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:26.543Z,1513269566.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:26.913Z,1513269566.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:27.307Z,1513269567.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:27.704Z,1513269567.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:27.743Z,1513269567.743 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:39:28.107Z,1513269568.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:28.507Z,1513269568.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:28.907Z,1513269568.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:29.306Z,1513269569.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:29.749Z,1513269569.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:30.118Z,1513269570.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:30.507Z,1513269570.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:30.907Z,1513269570.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:31.314Z,1513269571.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:31.557Z,1513269571.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:31.710Z,1513269571.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:32.156Z,1513269572.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:32.353Z,1513269572.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:32.516Z,1513269572.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:32.757Z,1513269572.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:32.964Z,1513269572.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:33.305Z,1513269573.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:33.718Z,1513269573.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:34.105Z,1513269574.105 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T16:39:34.105Z,1513269574.105 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:39:34.105Z,1513269574.105 [BPC1](ERROR): Data Fault
2017-12-14T16:39:34.113Z,1513269574.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:34.126Z,1513269574.126 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:39:34.517Z,1513269574.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:34.916Z,1513269574.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:35.305Z,1513269575.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:35.318Z,1513269575.318 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:39:35.318Z,1513269575.318 [BPC1] No Fault, FailCount= 1
2017-12-14T16:39:35.569Z,1513269575.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:35.767Z,1513269575.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:36.111Z,1513269576.111 [NAL9602](INFO): Powering up NAL9602
2017-12-14T16:39:36.168Z,1513269576.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:36.367Z,1513269576.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:36.508Z,1513269576.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:36.773Z,1513269576.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:36.906Z,1513269576.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:37.310Z,1513269577.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:37.569Z,1513269577.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:37.707Z,1513269577.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:38.138Z,1513269578.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:38.365Z,1513269578.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:38.527Z,1513269578.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:38.769Z,1513269578.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:38.903Z,1513269578.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:39.382Z,1513269579.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:39.729Z,1513269579.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:40.103Z,1513269580.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:40.506Z,1513269580.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:40.907Z,1513269580.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:41.307Z,1513269581.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:41.310Z,1513269581.310 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:34:41.2Z
2017-12-14T16:39:41.310Z,1513269581.310 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T16:39:41.310Z,1513269581.310 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T16:39:41.703Z,1513269581.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:42.539Z,1513269582.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:45.835Z,1513269585.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:45.904Z,1513269585.904 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0372.lzma
2017-12-14T16:39:45.975Z,1513269585.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:46.331Z,1513269586.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:46.680Z,1513269586.680 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0372.lzma.bak
2017-12-14T16:39:46.680Z,1513269586.680 [DataOverHttps](INFO): SBD MOMSN=5439150
2017-12-14T16:39:46.746Z,1513269586.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:47.827Z,1513269587.827 [NAL9602](INFO): NAL9602 initialized
2017-12-14T16:39:47.859Z,1513269587.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:47.999Z,1513269587.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:49.577Z,1513269589.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:50.374Z,1513269590.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:50.785Z,1513269590.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:39:51.557Z,1513269591.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:51.685Z,1513269591.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:52.106Z,1513269592.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:52.503Z,1513269592.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:52.874Z,1513269592.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:53.276Z,1513269593.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:56.859Z,1513269596.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:56.929Z,1513269596.929 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0373.lzma
2017-12-14T16:39:56.995Z,1513269596.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:57.350Z,1513269597.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:57.692Z,1513269597.692 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0373.lzma.bak
2017-12-14T16:39:57.692Z,1513269597.692 [DataOverHttps](INFO): SBD MOMSN=5439152
2017-12-14T16:39:57.803Z,1513269597.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:58.980Z,1513269598.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:39:58.983Z,1513269598.983 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T16:39:58.983Z,1513269598.983 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T16:39:58.983Z,1513269598.983 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T16:39:59.112Z,1513269599.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:02.628Z,1513269602.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:02.791Z,1513269602.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:03.185Z,1513269603.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:03.526Z,1513269603.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:03.918Z,1513269603.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:04.401Z,1513269604.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:04.755Z,1513269604.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:05.152Z,1513269605.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:05.532Z,1513269605.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:05.933Z,1513269605.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:06.333Z,1513269606.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:06.732Z,1513269606.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:07.122Z,1513269607.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:07.539Z,1513269607.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:07.943Z,1513269607.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:08.346Z,1513269608.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:08.733Z,1513269608.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:09.144Z,1513269609.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:09.529Z,1513269609.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:09.936Z,1513269609.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:10.338Z,1513269610.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:10.748Z,1513269610.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:11.143Z,1513269611.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:11.590Z,1513269611.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:11.918Z,1513269611.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:12.340Z,1513269612.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:12.748Z,1513269612.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:13.191Z,1513269613.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:13.550Z,1513269613.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:13.945Z,1513269613.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:14.352Z,1513269614.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:14.728Z,1513269614.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:15.131Z,1513269615.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:15.294Z,1513269615.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:40:15.524Z,1513269615.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:15.931Z,1513269615.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:16.091Z,1513269616.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:40:16.402Z,1513269616.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:16.755Z,1513269616.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:17.147Z,1513269617.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:17.548Z,1513269617.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:17.940Z,1513269617.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:18.394Z,1513269618.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:18.826Z,1513269618.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:19.131Z,1513269619.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:19.537Z,1513269619.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:19.943Z,1513269619.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:20.371Z,1513269620.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:20.724Z,1513269620.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:21.143Z,1513269621.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:21.526Z,1513269621.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:21.969Z,1513269621.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:22.339Z,1513269622.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:22.749Z,1513269622.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:23.159Z,1513269623.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:23.571Z,1513269623.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:23.964Z,1513269623.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:24.337Z,1513269624.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:24.758Z,1513269624.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:25.140Z,1513269625.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:25.563Z,1513269625.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:25.951Z,1513269625.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:26.339Z,1513269626.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:26.727Z,1513269626.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:27.143Z,1513269627.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:27.531Z,1513269627.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:27.924Z,1513269627.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:28.367Z,1513269628.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:28.747Z,1513269628.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:29.139Z,1513269629.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:29.286Z,1513269629.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:40:29.540Z,1513269629.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:29.932Z,1513269629.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:30.081Z,1513269630.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:40:30.458Z,1513269630.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:30.727Z,1513269630.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:31.121Z,1513269631.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:31.598Z,1513269631.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:31.954Z,1513269631.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:32.458Z,1513269632.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:32.728Z,1513269632.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:33.131Z,1513269633.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:33.562Z,1513269633.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:33.963Z,1513269633.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:34.336Z,1513269634.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:34.751Z,1513269634.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:35.159Z,1513269635.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:35.554Z,1513269635.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:35.928Z,1513269635.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:36.343Z,1513269636.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:36.746Z,1513269636.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:37.131Z,1513269637.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:37.554Z,1513269637.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:37.963Z,1513269637.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:38.344Z,1513269638.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:38.739Z,1513269638.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:39.131Z,1513269639.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:39.518Z,1513269639.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:39.924Z,1513269639.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:40.351Z,1513269640.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:40.760Z,1513269640.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:41.152Z,1513269641.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:41.542Z,1513269641.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:41.932Z,1513269641.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:42.329Z,1513269642.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:42.731Z,1513269642.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:43.135Z,1513269643.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:43.541Z,1513269643.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:43.945Z,1513269643.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:44.472Z,1513269644.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:44.743Z,1513269644.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:45.143Z,1513269645.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:45.587Z,1513269645.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:45.992Z,1513269645.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:46.378Z,1513269646.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:46.767Z,1513269646.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:47.138Z,1513269647.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:47.567Z,1513269647.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:47.925Z,1513269647.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:48.340Z,1513269648.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:48.743Z,1513269648.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:49.121Z,1513269649.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:49.552Z,1513269649.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:49.927Z,1513269649.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:50.351Z,1513269650.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:50.766Z,1513269650.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:51.196Z,1513269651.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:51.531Z,1513269651.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:51.939Z,1513269651.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:52.323Z,1513269652.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:52.748Z,1513269652.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:53.151Z,1513269653.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:53.151Z,1513269653.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 322
2017-12-14T16:40:53.152Z,1513269653.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:40:53.153Z,1513269653.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:53.154Z,1513269653.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 322
2017-12-14T16:40:53.154Z,1513269653.154 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:40:53.156Z,1513269653.156 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:53.156Z,1513269653.156 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 322
2017-12-14T16:40:53.156Z,1513269653.156 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:40:53.168Z,1513269653.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:40:53.168Z,1513269653.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:40:53.168Z,1513269653.168 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:40:53.561Z,1513269653.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:40:53.561Z,1513269653.561 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 322
2017-12-14T16:40:53.562Z,1513269653.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:40:53.562Z,1513269653.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 322
2017-12-14T16:40:53.562Z,1513269653.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:40:53.562Z,1513269653.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 322
2017-12-14T16:40:54.050Z,1513269654.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:40:54.050Z,1513269654.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:40:54.051Z,1513269654.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:40:54.051Z,1513269654.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:40:54.051Z,1513269654.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:40:54.052Z,1513269654.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:40:54.052Z,1513269654.052 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:40:54.053Z,1513269654.053 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:40:54.053Z,1513269654.053 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:40:54.335Z,1513269654.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:54.734Z,1513269654.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:55.131Z,1513269655.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:55.533Z,1513269655.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:55.960Z,1513269655.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:56.339Z,1513269656.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:56.731Z,1513269656.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:57.130Z,1513269657.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:57.528Z,1513269657.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:57.932Z,1513269657.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:58.435Z,1513269658.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:58.751Z,1513269658.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:59.142Z,1513269659.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:40:59.539Z,1513269659.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:03.200Z,1513269663.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:03.312Z,1513269663.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:03.711Z,1513269663.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:04.109Z,1513269664.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:04.515Z,1513269664.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:04.900Z,1513269664.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:05.296Z,1513269665.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:05.704Z,1513269665.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:06.108Z,1513269666.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:06.555Z,1513269666.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:06.916Z,1513269666.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:07.310Z,1513269667.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:07.699Z,1513269667.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:08.187Z,1513269668.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:08.495Z,1513269668.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:08.894Z,1513269668.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:09.339Z,1513269669.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:09.721Z,1513269669.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:10.192Z,1513269670.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:10.524Z,1513269670.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:10.892Z,1513269670.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:11.292Z,1513269671.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:11.696Z,1513269671.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:12.119Z,1513269672.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:12.535Z,1513269672.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:12.913Z,1513269672.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:13.341Z,1513269673.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:13.699Z,1513269673.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:14.096Z,1513269674.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:14.514Z,1513269674.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:14.900Z,1513269674.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:15.300Z,1513269675.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:15.711Z,1513269675.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:16.116Z,1513269676.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:16.543Z,1513269676.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:16.896Z,1513269676.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:17.303Z,1513269677.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:17.741Z,1513269677.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:18.196Z,1513269678.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:18.541Z,1513269678.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:18.919Z,1513269678.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:19.340Z,1513269679.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:19.756Z,1513269679.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:20.111Z,1513269680.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:20.546Z,1513269680.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:20.938Z,1513269680.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:21.307Z,1513269681.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:21.727Z,1513269681.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:22.143Z,1513269682.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:22.516Z,1513269682.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:22.929Z,1513269682.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:23.328Z,1513269683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:23.735Z,1513269683.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:24.172Z,1513269684.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:24.557Z,1513269684.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:24.930Z,1513269684.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:25.314Z,1513269685.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:25.334Z,1513269685.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:41:25.711Z,1513269685.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:26.092Z,1513269686.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:26.130Z,1513269686.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:41:26.520Z,1513269686.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:26.911Z,1513269686.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:27.334Z,1513269687.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:27.736Z,1513269687.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:28.110Z,1513269688.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:28.513Z,1513269688.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:28.907Z,1513269688.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:29.418Z,1513269689.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:29.761Z,1513269689.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:30.215Z,1513269690.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:30.643Z,1513269690.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:30.928Z,1513269690.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:31.363Z,1513269691.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:31.753Z,1513269691.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:32.155Z,1513269692.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:32.511Z,1513269692.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:32.949Z,1513269692.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:33.312Z,1513269693.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:33.723Z,1513269693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:34.157Z,1513269694.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:34.528Z,1513269694.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:34.904Z,1513269694.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:35.334Z,1513269695.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:35.732Z,1513269695.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:36.100Z,1513269696.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:36.511Z,1513269696.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:36.924Z,1513269696.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:37.346Z,1513269697.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:37.736Z,1513269697.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:38.180Z,1513269698.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:38.503Z,1513269698.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:38.911Z,1513269698.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:39.305Z,1513269699.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:39.742Z,1513269699.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:40.124Z,1513269700.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:40.555Z,1513269700.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:40.919Z,1513269700.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:41.309Z,1513269701.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:41.700Z,1513269701.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:42.150Z,1513269702.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:42.531Z,1513269702.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:42.923Z,1513269702.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:43.334Z,1513269703.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:43.748Z,1513269703.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:44.103Z,1513269704.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:44.507Z,1513269704.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:44.899Z,1513269704.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:45.303Z,1513269705.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:45.766Z,1513269705.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:46.154Z,1513269706.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:46.527Z,1513269706.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:46.907Z,1513269706.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:47.335Z,1513269707.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:47.705Z,1513269707.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:48.159Z,1513269708.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:48.544Z,1513269708.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:48.910Z,1513269708.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:49.315Z,1513269709.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:49.699Z,1513269709.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:50.106Z,1513269710.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:50.507Z,1513269710.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:50.903Z,1513269710.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:51.319Z,1513269711.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:51.711Z,1513269711.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:52.147Z,1513269712.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:52.558Z,1513269712.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:52.906Z,1513269712.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:53.335Z,1513269713.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:53.704Z,1513269713.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:54.139Z,1513269714.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:54.515Z,1513269714.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:54.911Z,1513269714.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:55.342Z,1513269715.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:55.698Z,1513269715.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:56.095Z,1513269716.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:56.496Z,1513269716.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:56.902Z,1513269716.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:57.307Z,1513269717.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:57.708Z,1513269717.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:58.108Z,1513269718.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:58.508Z,1513269718.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:58.947Z,1513269718.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:59.299Z,1513269719.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:41:59.703Z,1513269719.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:03.206Z,1513269723.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:03.368Z,1513269723.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:03.712Z,1513269723.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:04.116Z,1513269724.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:04.486Z,1513269724.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:04.884Z,1513269724.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:05.323Z,1513269725.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:05.687Z,1513269725.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:06.148Z,1513269726.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:06.496Z,1513269726.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:06.887Z,1513269726.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:07.277Z,1513269727.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:07.681Z,1513269727.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:08.082Z,1513269728.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:08.572Z,1513269728.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:08.895Z,1513269728.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:09.288Z,1513269729.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:09.682Z,1513269729.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:10.091Z,1513269730.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:10.527Z,1513269730.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:10.883Z,1513269730.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:11.288Z,1513269731.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:11.684Z,1513269731.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:12.101Z,1513269732.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:12.497Z,1513269732.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:12.887Z,1513269732.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:13.279Z,1513269733.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:13.675Z,1513269733.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:14.136Z,1513269734.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:14.505Z,1513269734.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:14.939Z,1513269734.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:15.338Z,1513269735.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:15.675Z,1513269735.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:16.132Z,1513269736.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:16.484Z,1513269736.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:16.922Z,1513269736.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:17.283Z,1513269737.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:17.703Z,1513269737.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:18.170Z,1513269738.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:18.491Z,1513269738.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:18.886Z,1513269738.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:19.284Z,1513269739.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:19.685Z,1513269739.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:20.147Z,1513269740.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:20.490Z,1513269740.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:20.895Z,1513269740.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:21.329Z,1513269741.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:21.685Z,1513269741.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:22.098Z,1513269742.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:22.488Z,1513269742.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:22.939Z,1513269742.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:23.282Z,1513269743.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:23.693Z,1513269743.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:24.099Z,1513269744.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:24.526Z,1513269744.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:24.888Z,1513269744.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:25.311Z,1513269745.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:25.697Z,1513269745.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:26.112Z,1513269746.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:26.510Z,1513269746.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:26.880Z,1513269746.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:27.284Z,1513269747.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:27.732Z,1513269747.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:28.108Z,1513269748.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:28.479Z,1513269748.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:28.882Z,1513269748.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:29.279Z,1513269749.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:29.684Z,1513269749.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:30.107Z,1513269750.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:30.485Z,1513269750.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:30.930Z,1513269750.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:31.275Z,1513269751.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:31.679Z,1513269751.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:32.115Z,1513269752.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:32.495Z,1513269752.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:32.889Z,1513269752.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:33.295Z,1513269753.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:33.690Z,1513269753.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:34.212Z,1513269754.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:34.479Z,1513269754.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:34.876Z,1513269754.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:35.283Z,1513269755.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:35.695Z,1513269755.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:36.134Z,1513269756.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:36.500Z,1513269756.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:36.923Z,1513269756.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:37.303Z,1513269757.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:37.683Z,1513269757.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:38.123Z,1513269758.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:38.493Z,1513269758.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:38.925Z,1513269758.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:39.288Z,1513269759.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:39.686Z,1513269759.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:40.103Z,1513269760.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:40.481Z,1513269760.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:40.880Z,1513269760.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:41.278Z,1513269761.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:41.699Z,1513269761.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:42.106Z,1513269762.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:42.496Z,1513269762.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:42.873Z,1513269762.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:43.290Z,1513269763.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:43.677Z,1513269763.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:44.109Z,1513269764.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:44.531Z,1513269764.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:44.907Z,1513269764.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:45.308Z,1513269765.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:45.679Z,1513269765.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:46.106Z,1513269766.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:46.487Z,1513269766.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:46.967Z,1513269766.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:47.279Z,1513269767.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:47.730Z,1513269767.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:48.148Z,1513269768.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:48.499Z,1513269768.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:48.887Z,1513269768.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:49.280Z,1513269769.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:49.683Z,1513269769.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:50.075Z,1513269770.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:50.488Z,1513269770.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:50.949Z,1513269770.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:51.291Z,1513269771.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:51.682Z,1513269771.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:52.086Z,1513269772.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:52.481Z,1513269772.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:52.889Z,1513269772.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:53.287Z,1513269773.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:53.690Z,1513269773.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:54.140Z,1513269774.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:54.502Z,1513269774.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:54.889Z,1513269774.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:55.285Z,1513269775.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:55.675Z,1513269775.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:56.102Z,1513269776.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:56.511Z,1513269776.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:56.905Z,1513269776.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:57.281Z,1513269777.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:57.682Z,1513269777.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:58.172Z,1513269778.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:58.476Z,1513269778.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:58.919Z,1513269778.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:59.278Z,1513269779.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:42:59.712Z,1513269779.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:00.117Z,1513269780.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:03.511Z,1513269783.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:03.655Z,1513269783.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:04.006Z,1513269784.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:04.480Z,1513269784.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:04.786Z,1513269784.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:05.196Z,1513269785.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:05.601Z,1513269785.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:06.003Z,1513269786.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:06.463Z,1513269786.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:06.799Z,1513269786.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:07.179Z,1513269787.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:07.580Z,1513269787.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:08.063Z,1513269788.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:08.434Z,1513269788.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:08.803Z,1513269788.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:09.197Z,1513269789.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:09.589Z,1513269789.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:10.087Z,1513269790.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:10.435Z,1513269790.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:10.834Z,1513269790.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:11.203Z,1513269791.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:11.610Z,1513269791.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:12.055Z,1513269792.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:12.392Z,1513269792.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:12.836Z,1513269792.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:13.200Z,1513269793.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:13.591Z,1513269793.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:14.080Z,1513269794.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:14.428Z,1513269794.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:14.801Z,1513269794.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:15.201Z,1513269795.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:15.593Z,1513269795.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:15.995Z,1513269795.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:16.414Z,1513269796.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:16.804Z,1513269796.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:17.203Z,1513269797.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:17.603Z,1513269797.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:18.006Z,1513269798.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:18.443Z,1513269798.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:18.807Z,1513269798.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:19.207Z,1513269799.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:19.579Z,1513269799.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:19.975Z,1513269799.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:20.483Z,1513269800.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:20.829Z,1513269800.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:21.231Z,1513269801.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:21.582Z,1513269801.582 [BPC1](ERROR): Failed to parse message.
2017-12-14T16:43:21.583Z,1513269801.583 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T16:43:21.583Z,1513269801.583 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:43:21.583Z,1513269801.583 [BPC1](ERROR): Data Fault
2017-12-14T16:43:21.591Z,1513269801.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:21.604Z,1513269801.604 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:43:22.044Z,1513269802.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:22.407Z,1513269802.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:22.812Z,1513269802.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:22.842Z,1513269802.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:43:22.842Z,1513269802.842 [BPC1] No Fault, FailCount= 1
2017-12-14T16:43:23.259Z,1513269803.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:23.579Z,1513269803.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:24.055Z,1513269804.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:24.401Z,1513269804.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:24.803Z,1513269804.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:25.202Z,1513269805.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:25.582Z,1513269805.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:26.040Z,1513269806.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:26.386Z,1513269806.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:26.838Z,1513269806.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:27.189Z,1513269807.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:27.588Z,1513269807.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:28.067Z,1513269808.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:28.392Z,1513269808.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:28.789Z,1513269808.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:29.228Z,1513269809.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:29.584Z,1513269809.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:30.067Z,1513269810.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:30.393Z,1513269810.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:30.796Z,1513269810.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:31.192Z,1513269811.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:31.634Z,1513269811.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:31.984Z,1513269811.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:32.477Z,1513269812.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:32.819Z,1513269812.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:33.202Z,1513269813.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:33.582Z,1513269813.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:33.979Z,1513269813.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:34.453Z,1513269814.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:34.807Z,1513269814.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:35.199Z,1513269815.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:35.586Z,1513269815.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:36.059Z,1513269816.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:36.402Z,1513269816.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:36.804Z,1513269816.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:37.246Z,1513269817.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:37.587Z,1513269817.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:38.073Z,1513269818.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:38.409Z,1513269818.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:38.832Z,1513269818.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:39.211Z,1513269819.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:39.647Z,1513269819.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:40.067Z,1513269820.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:40.421Z,1513269820.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:40.789Z,1513269820.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:41.196Z,1513269821.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:41.588Z,1513269821.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:42.071Z,1513269822.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:42.417Z,1513269822.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:42.811Z,1513269822.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:43.259Z,1513269823.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:43.591Z,1513269823.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:43.977Z,1513269823.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:44.443Z,1513269824.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:44.805Z,1513269824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:45.235Z,1513269825.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:45.591Z,1513269825.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:46.027Z,1513269826.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:46.445Z,1513269826.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:46.832Z,1513269826.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:47.209Z,1513269827.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:47.595Z,1513269827.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:47.972Z,1513269827.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:48.452Z,1513269828.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:48.811Z,1513269828.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:49.212Z,1513269829.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:49.584Z,1513269829.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:50.188Z,1513269830.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:50.442Z,1513269830.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:50.807Z,1513269830.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:51.204Z,1513269831.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:51.591Z,1513269831.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:52.064Z,1513269832.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:52.439Z,1513269832.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:52.795Z,1513269832.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:53.193Z,1513269833.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:53.620Z,1513269833.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:54.086Z,1513269834.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:54.086Z,1513269834.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 323
2017-12-14T16:43:54.086Z,1513269834.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:43:54.088Z,1513269834.088 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:54.088Z,1513269834.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 323
2017-12-14T16:43:54.088Z,1513269834.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:43:54.090Z,1513269834.090 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:54.090Z,1513269834.090 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 323
2017-12-14T16:43:54.090Z,1513269834.091 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:43:54.102Z,1513269834.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:43:54.102Z,1513269834.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:43:54.103Z,1513269834.103 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:43:54.443Z,1513269834.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:43:54.443Z,1513269834.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 323
2017-12-14T16:43:54.443Z,1513269834.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:43:54.443Z,1513269834.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 323
2017-12-14T16:43:54.444Z,1513269834.444 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:43:54.444Z,1513269834.444 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 323
2017-12-14T16:43:54.801Z,1513269834.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:43:54.802Z,1513269834.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:43:54.802Z,1513269834.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:43:54.803Z,1513269834.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:43:54.805Z,1513269834.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:43:54.806Z,1513269834.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:43:54.807Z,1513269834.807 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:43:54.808Z,1513269834.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:43:54.811Z,1513269834.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:43:55.194Z,1513269835.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:55.661Z,1513269835.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:56.059Z,1513269836.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:56.385Z,1513269836.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:56.795Z,1513269836.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:57.195Z,1513269837.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:57.588Z,1513269837.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:57.981Z,1513269837.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:58.403Z,1513269838.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:58.811Z,1513269838.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:59.211Z,1513269839.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:59.577Z,1513269839.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:43:59.972Z,1513269839.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:00.471Z,1513269840.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:03.921Z,1513269843.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:04.110Z,1513269844.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:04.419Z,1513269844.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:04.796Z,1513269844.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:05.288Z,1513269845.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:05.666Z,1513269845.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:06.051Z,1513269846.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:06.446Z,1513269846.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:06.797Z,1513269846.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:07.240Z,1513269847.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:07.597Z,1513269847.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:08.059Z,1513269848.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:08.416Z,1513269848.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:08.830Z,1513269848.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:09.200Z,1513269849.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:09.600Z,1513269849.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:10.065Z,1513269850.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:10.442Z,1513269850.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:10.814Z,1513269850.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:11.215Z,1513269851.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:11.646Z,1513269851.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:12.010Z,1513269852.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:12.415Z,1513269852.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:12.819Z,1513269852.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:13.210Z,1513269853.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:13.605Z,1513269853.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:14.014Z,1513269854.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:14.464Z,1513269854.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:14.839Z,1513269854.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:15.223Z,1513269855.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:15.628Z,1513269855.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:15.988Z,1513269855.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:16.473Z,1513269856.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:16.826Z,1513269856.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:17.224Z,1513269857.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:17.595Z,1513269857.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:18.119Z,1513269858.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:18.443Z,1513269858.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:18.820Z,1513269858.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:19.213Z,1513269859.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:19.603Z,1513269859.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:20.075Z,1513269860.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:20.449Z,1513269860.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:20.849Z,1513269860.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:21.210Z,1513269861.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:21.608Z,1513269861.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:22.077Z,1513269862.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:22.445Z,1513269862.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:22.808Z,1513269862.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:23.207Z,1513269863.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:23.615Z,1513269863.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:24.066Z,1513269864.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:24.451Z,1513269864.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:24.812Z,1513269864.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:25.226Z,1513269865.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:25.608Z,1513269865.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:25.999Z,1513269865.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:26.403Z,1513269866.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:26.828Z,1513269866.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:27.263Z,1513269867.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:27.675Z,1513269867.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:28.104Z,1513269868.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:28.456Z,1513269868.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:28.825Z,1513269868.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:29.251Z,1513269869.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:29.599Z,1513269869.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:30.034Z,1513269870.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:30.470Z,1513269870.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:30.849Z,1513269870.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:31.233Z,1513269871.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:31.615Z,1513269871.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:32.099Z,1513269872.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:32.436Z,1513269872.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:32.839Z,1513269872.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:33.237Z,1513269873.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:33.602Z,1513269873.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:34.060Z,1513269874.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:34.428Z,1513269874.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:34.831Z,1513269874.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:35.223Z,1513269875.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:35.595Z,1513269875.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:36.082Z,1513269876.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:36.435Z,1513269876.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:36.804Z,1513269876.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:37.201Z,1513269877.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:37.604Z,1513269877.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:38.112Z,1513269878.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:38.421Z,1513269878.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:38.812Z,1513269878.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:39.229Z,1513269879.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:39.597Z,1513269879.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:39.997Z,1513269879.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:40.420Z,1513269880.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:40.823Z,1513269880.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:41.219Z,1513269881.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:41.604Z,1513269881.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:42.007Z,1513269882.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:42.459Z,1513269882.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:42.845Z,1513269882.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:43.244Z,1513269883.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:43.648Z,1513269883.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:43.996Z,1513269883.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:44.479Z,1513269884.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:44.832Z,1513269884.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:45.215Z,1513269885.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:45.593Z,1513269885.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:46.064Z,1513269886.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:46.429Z,1513269886.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:46.847Z,1513269886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:47.207Z,1513269887.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:47.595Z,1513269887.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:48.087Z,1513269888.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:48.432Z,1513269888.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:48.827Z,1513269888.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:49.221Z,1513269889.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:49.596Z,1513269889.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:50.148Z,1513269890.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:50.436Z,1513269890.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:50.802Z,1513269890.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:51.227Z,1513269891.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:51.604Z,1513269891.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:52.080Z,1513269892.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:52.447Z,1513269892.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:52.823Z,1513269892.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:53.213Z,1513269893.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:53.607Z,1513269893.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:54.015Z,1513269894.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:54.403Z,1513269894.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:54.806Z,1513269894.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:55.204Z,1513269895.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:55.597Z,1513269895.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:55.998Z,1513269895.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:56.482Z,1513269896.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:56.826Z,1513269896.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:57.218Z,1513269897.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:57.608Z,1513269897.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:57.986Z,1513269897.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:58.470Z,1513269898.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:58.831Z,1513269898.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:59.213Z,1513269899.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:59.216Z,1513269899.216 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:44:59.221Z,1513269899.221 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:44:59.221Z,1513269899.221 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:44:59.221Z,1513269899.221 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:44:59.596Z,1513269899.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:44:59.599Z,1513269899.599 [Default:CheckIn:D] Stopped
2017-12-14T16:44:59.599Z,1513269899.599 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:45:00.065Z,1513269900.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:00.084Z,1513269900.084 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 971.736849 min 
2017-12-14T16:45:00.084Z,1513269900.084 [Default:CheckIn:E] Stopped
2017-12-14T16:45:00.084Z,1513269900.084 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:45:00.084Z,1513269900.084 [Default:CheckIn] Stopped
2017-12-14T16:45:00.084Z,1513269900.084 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:45:00.085Z,1513269900.085 [Default:CheckIn](INFO): Running loop #94
2017-12-14T16:45:00.085Z,1513269900.085 [Default:CheckIn] Running Loop=94
2017-12-14T16:45:00.085Z,1513269900.085 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:45:00.085Z,1513269900.085 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:45:00.453Z,1513269900.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:03.807Z,1513269903.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:03.951Z,1513269903.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:04.287Z,1513269904.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:04.683Z,1513269904.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:05.080Z,1513269905.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:05.496Z,1513269905.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:05.891Z,1513269905.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:06.290Z,1513269906.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:06.681Z,1513269906.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:07.087Z,1513269907.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:07.484Z,1513269907.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:07.878Z,1513269907.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:08.292Z,1513269908.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:08.695Z,1513269908.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:09.103Z,1513269909.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:09.493Z,1513269909.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:09.898Z,1513269909.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:10.270Z,1513269910.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:10.681Z,1513269910.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:11.077Z,1513269911.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:11.506Z,1513269911.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:11.911Z,1513269911.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:12.350Z,1513269912.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:12.731Z,1513269912.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:13.073Z,1513269913.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:13.515Z,1513269913.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:13.872Z,1513269913.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:14.312Z,1513269914.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:14.695Z,1513269914.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:15.099Z,1513269915.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:15.495Z,1513269915.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:15.879Z,1513269915.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:16.280Z,1513269916.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:16.682Z,1513269916.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:17.074Z,1513269917.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:17.495Z,1513269917.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:17.887Z,1513269917.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:18.308Z,1513269918.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:18.704Z,1513269918.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:19.077Z,1513269919.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:19.487Z,1513269919.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:19.882Z,1513269919.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:20.287Z,1513269920.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:20.688Z,1513269920.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:21.087Z,1513269921.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:21.487Z,1513269921.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:21.916Z,1513269921.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:22.283Z,1513269922.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:22.711Z,1513269922.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:23.087Z,1513269923.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:23.495Z,1513269923.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:23.887Z,1513269923.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:24.288Z,1513269924.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:24.686Z,1513269924.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:25.185Z,1513269925.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:25.475Z,1513269925.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:25.879Z,1513269925.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:26.275Z,1513269926.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:26.692Z,1513269926.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:27.097Z,1513269927.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:27.493Z,1513269927.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:27.886Z,1513269927.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:28.287Z,1513269928.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:28.691Z,1513269928.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:29.088Z,1513269929.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:29.492Z,1513269929.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:29.894Z,1513269929.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:30.292Z,1513269930.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:30.691Z,1513269930.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:31.090Z,1513269931.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:31.507Z,1513269931.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:31.898Z,1513269931.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:32.292Z,1513269932.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:32.707Z,1513269932.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:33.100Z,1513269933.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:33.498Z,1513269933.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:33.898Z,1513269933.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:34.284Z,1513269934.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:34.726Z,1513269934.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:35.122Z,1513269935.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:35.503Z,1513269935.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:35.922Z,1513269935.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:36.353Z,1513269936.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:36.679Z,1513269936.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:37.116Z,1513269937.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:37.484Z,1513269937.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:37.885Z,1513269937.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:38.291Z,1513269938.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:38.724Z,1513269938.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:39.111Z,1513269939.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:39.506Z,1513269939.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:39.875Z,1513269939.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:40.277Z,1513269940.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:40.687Z,1513269940.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:41.083Z,1513269941.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:41.487Z,1513269941.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:42.039Z,1513269942.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:42.295Z,1513269942.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:42.683Z,1513269942.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:43.087Z,1513269943.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:43.484Z,1513269943.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:43.881Z,1513269943.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:44.280Z,1513269944.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:44.692Z,1513269944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:45.092Z,1513269945.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:45.520Z,1513269945.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:45.887Z,1513269945.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:46.283Z,1513269946.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:46.691Z,1513269946.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:47.091Z,1513269947.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:47.494Z,1513269947.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:47.893Z,1513269947.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:48.337Z,1513269948.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:48.691Z,1513269948.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:49.099Z,1513269949.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:49.496Z,1513269949.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:49.901Z,1513269949.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:50.286Z,1513269950.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:50.707Z,1513269950.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:51.107Z,1513269951.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:51.563Z,1513269951.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:51.877Z,1513269951.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:52.283Z,1513269952.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:52.687Z,1513269952.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:53.087Z,1513269953.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:53.492Z,1513269953.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:53.899Z,1513269953.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:54.292Z,1513269954.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:54.715Z,1513269954.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:55.079Z,1513269955.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:55.474Z,1513269955.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:55.900Z,1513269955.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:56.301Z,1513269956.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:56.697Z,1513269956.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:57.127Z,1513269957.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:57.533Z,1513269957.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:57.880Z,1513269957.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:58.315Z,1513269958.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:58.714Z,1513269958.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:59.118Z,1513269959.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:59.492Z,1513269959.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:45:59.893Z,1513269959.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:00.284Z,1513269960.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:00.690Z,1513269960.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:04.164Z,1513269964.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:04.314Z,1513269964.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:04.643Z,1513269964.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:05.064Z,1513269965.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:05.440Z,1513269965.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:05.867Z,1513269965.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:06.236Z,1513269966.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:06.641Z,1513269966.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:07.026Z,1513269967.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:07.480Z,1513269967.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:07.850Z,1513269967.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:08.303Z,1513269968.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:08.645Z,1513269968.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:09.047Z,1513269969.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:09.443Z,1513269969.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:09.842Z,1513269969.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:10.243Z,1513269970.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:10.646Z,1513269970.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:11.046Z,1513269971.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:11.447Z,1513269971.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:11.839Z,1513269971.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:12.240Z,1513269972.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:12.680Z,1513269972.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:13.051Z,1513269973.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:13.451Z,1513269973.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:13.859Z,1513269973.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:14.251Z,1513269974.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:14.681Z,1513269974.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:15.035Z,1513269975.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:15.442Z,1513269975.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:15.842Z,1513269975.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:16.242Z,1513269976.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:16.658Z,1513269976.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:17.055Z,1513269977.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:17.445Z,1513269977.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:17.908Z,1513269977.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:18.287Z,1513269978.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:18.667Z,1513269978.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:19.072Z,1513269979.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:19.463Z,1513269979.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:19.920Z,1513269979.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:20.271Z,1513269980.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:20.677Z,1513269980.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:21.103Z,1513269981.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:21.491Z,1513269981.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:21.861Z,1513269981.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:22.279Z,1513269982.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:22.699Z,1513269982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:23.098Z,1513269983.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:23.470Z,1513269983.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:23.851Z,1513269983.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:24.271Z,1513269984.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:24.703Z,1513269984.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:25.064Z,1513269985.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:25.473Z,1513269985.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:25.874Z,1513269985.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:26.276Z,1513269986.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:26.639Z,1513269986.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:27.035Z,1513269987.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:27.443Z,1513269987.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:27.856Z,1513269987.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:28.267Z,1513269988.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:28.660Z,1513269988.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:29.096Z,1513269989.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:29.470Z,1513269989.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:29.865Z,1513269989.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:30.338Z,1513269990.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:30.646Z,1513269990.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:31.086Z,1513269991.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:31.502Z,1513269991.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:31.859Z,1513269991.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:32.311Z,1513269992.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:32.692Z,1513269992.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:33.051Z,1513269993.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:33.469Z,1513269993.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:33.870Z,1513269993.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:34.259Z,1513269994.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:34.675Z,1513269994.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:34.834Z,1513269994.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:46:35.072Z,1513269995.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:35.495Z,1513269995.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:35.630Z,1513269995.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:46:35.847Z,1513269995.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:36.272Z,1513269996.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:36.668Z,1513269996.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:37.073Z,1513269997.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:37.468Z,1513269997.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:37.855Z,1513269997.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:38.247Z,1513269998.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:38.674Z,1513269998.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:39.047Z,1513269999.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:39.441Z,1513269999.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:39.856Z,1513269999.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:40.281Z,1513270000.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:40.687Z,1513270000.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:41.067Z,1513270001.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:41.458Z,1513270001.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:41.855Z,1513270001.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:42.313Z,1513270002.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:42.661Z,1513270002.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:43.036Z,1513270003.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:43.487Z,1513270003.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:43.860Z,1513270003.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:44.299Z,1513270004.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:44.666Z,1513270004.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:45.059Z,1513270005.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:45.459Z,1513270005.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:45.855Z,1513270005.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:46.255Z,1513270006.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:46.652Z,1513270006.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:47.054Z,1513270007.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:47.483Z,1513270007.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:47.861Z,1513270007.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:48.240Z,1513270008.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:48.691Z,1513270008.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:49.047Z,1513270009.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:49.451Z,1513270009.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:49.857Z,1513270009.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:50.254Z,1513270010.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:50.644Z,1513270010.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:51.032Z,1513270011.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:51.438Z,1513270011.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:51.883Z,1513270011.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:52.236Z,1513270012.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:52.665Z,1513270012.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:53.043Z,1513270013.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:53.487Z,1513270013.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:53.835Z,1513270013.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:54.242Z,1513270014.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:54.647Z,1513270014.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:55.043Z,1513270015.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:55.043Z,1513270015.043 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 324
2017-12-14T16:46:55.043Z,1513270015.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:46:55.069Z,1513270015.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:55.069Z,1513270015.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 324
2017-12-14T16:46:55.069Z,1513270015.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:46:55.071Z,1513270015.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:55.072Z,1513270015.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 324
2017-12-14T16:46:55.072Z,1513270015.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:46:55.113Z,1513270015.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:46:55.113Z,1513270015.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:46:55.114Z,1513270015.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:46:55.465Z,1513270015.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:46:55.465Z,1513270015.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 324
2017-12-14T16:46:55.466Z,1513270015.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:46:55.466Z,1513270015.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 324
2017-12-14T16:46:55.466Z,1513270015.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:46:55.466Z,1513270015.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 324
2017-12-14T16:46:55.852Z,1513270015.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:46:55.852Z,1513270015.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:46:55.853Z,1513270015.853 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:46:55.853Z,1513270015.853 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:46:55.854Z,1513270015.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:46:55.854Z,1513270015.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:46:55.854Z,1513270015.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:46:55.855Z,1513270015.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:46:55.855Z,1513270015.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:46:56.243Z,1513270016.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:56.642Z,1513270016.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:57.027Z,1513270017.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:57.457Z,1513270017.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:57.828Z,1513270017.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:58.344Z,1513270018.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:58.696Z,1513270018.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:59.063Z,1513270019.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:59.464Z,1513270019.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:46:59.832Z,1513270019.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:00.260Z,1513270020.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:00.632Z,1513270020.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:01.039Z,1513270021.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:04.740Z,1513270024.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:04.894Z,1513270024.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:05.251Z,1513270025.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:05.667Z,1513270025.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:06.094Z,1513270026.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:06.467Z,1513270026.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:06.851Z,1513270026.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:07.244Z,1513270027.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:07.643Z,1513270027.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:08.157Z,1513270028.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:08.444Z,1513270028.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:08.850Z,1513270028.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:09.234Z,1513270029.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:09.641Z,1513270029.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:10.079Z,1513270030.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:10.455Z,1513270030.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:10.836Z,1513270030.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:11.236Z,1513270031.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:11.639Z,1513270031.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:12.087Z,1513270032.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:12.445Z,1513270032.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:12.843Z,1513270032.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:13.241Z,1513270033.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:13.651Z,1513270033.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:14.101Z,1513270034.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:14.503Z,1513270034.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:14.836Z,1513270034.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:15.244Z,1513270035.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:15.636Z,1513270035.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:16.036Z,1513270036.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:16.448Z,1513270036.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:16.859Z,1513270036.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:17.248Z,1513270037.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:17.662Z,1513270037.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:18.045Z,1513270038.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:18.457Z,1513270038.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:18.834Z,1513270038.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:19.246Z,1513270039.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:19.647Z,1513270039.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:20.113Z,1513270040.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:20.450Z,1513270040.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:20.858Z,1513270040.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:21.252Z,1513270041.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:21.650Z,1513270041.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:22.091Z,1513270042.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:22.443Z,1513270042.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:22.910Z,1513270042.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:23.250Z,1513270043.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:23.623Z,1513270043.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:24.129Z,1513270044.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:24.443Z,1513270044.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:24.875Z,1513270044.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:25.233Z,1513270045.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:25.663Z,1513270045.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:26.092Z,1513270046.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:26.468Z,1513270046.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:26.886Z,1513270046.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:27.243Z,1513270047.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:27.631Z,1513270047.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:28.097Z,1513270048.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:28.459Z,1513270048.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:28.886Z,1513270048.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:29.247Z,1513270049.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:29.648Z,1513270049.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:30.020Z,1513270050.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:30.470Z,1513270050.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:30.827Z,1513270050.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:31.250Z,1513270051.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:31.655Z,1513270051.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:32.059Z,1513270052.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:32.562Z,1513270052.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:32.838Z,1513270052.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:33.237Z,1513270053.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:33.667Z,1513270053.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:34.078Z,1513270054.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:34.450Z,1513270054.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:34.845Z,1513270054.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:35.242Z,1513270055.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:35.633Z,1513270055.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:36.095Z,1513270056.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:36.460Z,1513270056.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:36.879Z,1513270056.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:37.270Z,1513270057.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:37.667Z,1513270057.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:38.088Z,1513270058.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:38.442Z,1513270058.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:38.871Z,1513270058.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:39.232Z,1513270059.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:39.646Z,1513270059.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:40.214Z,1513270060.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:40.445Z,1513270060.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:40.853Z,1513270060.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:41.260Z,1513270061.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:41.647Z,1513270061.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:42.089Z,1513270062.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:42.459Z,1513270062.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:42.835Z,1513270062.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:43.239Z,1513270063.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:43.661Z,1513270063.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:44.048Z,1513270064.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:44.448Z,1513270064.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:44.840Z,1513270064.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:45.235Z,1513270065.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:45.638Z,1513270065.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:46.049Z,1513270066.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:46.502Z,1513270066.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:46.830Z,1513270066.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:47.254Z,1513270067.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:47.631Z,1513270067.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:48.095Z,1513270068.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:48.438Z,1513270068.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:48.846Z,1513270068.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:49.245Z,1513270069.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:49.727Z,1513270069.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:50.108Z,1513270070.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:50.457Z,1513270070.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:50.843Z,1513270070.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:51.236Z,1513270071.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:51.660Z,1513270071.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:52.093Z,1513270072.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:52.475Z,1513270072.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:52.838Z,1513270072.838 [PNI_TCM](ERROR): CRC does not match. Expected:0x42085 got:0x192
2017-12-14T16:47:52.864Z,1513270072.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:53.244Z,1513270073.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:53.649Z,1513270073.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:54.094Z,1513270074.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:54.439Z,1513270074.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:54.885Z,1513270074.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:55.248Z,1513270075.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:55.643Z,1513270075.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:56.131Z,1513270076.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:56.443Z,1513270076.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:56.843Z,1513270076.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:57.231Z,1513270077.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:57.634Z,1513270077.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:58.036Z,1513270078.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:58.467Z,1513270078.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:58.844Z,1513270078.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:59.240Z,1513270079.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:47:59.630Z,1513270079.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:00.059Z,1513270080.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:00.451Z,1513270080.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:00.839Z,1513270080.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:01.239Z,1513270081.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:04.734Z,1513270084.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:04.855Z,1513270084.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:05.243Z,1513270085.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:05.657Z,1513270085.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:06.075Z,1513270086.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:06.427Z,1513270086.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:06.814Z,1513270086.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:07.220Z,1513270087.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:07.631Z,1513270087.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:08.080Z,1513270088.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:08.438Z,1513270088.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:08.870Z,1513270088.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:09.216Z,1513270089.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:09.609Z,1513270089.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:10.096Z,1513270090.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:10.463Z,1513270090.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:10.855Z,1513270090.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:11.255Z,1513270091.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:11.613Z,1513270091.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:12.104Z,1513270092.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:12.458Z,1513270092.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:12.853Z,1513270092.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:13.257Z,1513270093.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:13.628Z,1513270093.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:14.066Z,1513270094.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:14.459Z,1513270094.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:14.832Z,1513270094.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:15.227Z,1513270095.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:15.624Z,1513270095.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:16.096Z,1513270096.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:16.435Z,1513270096.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:16.839Z,1513270096.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:17.239Z,1513270097.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:17.637Z,1513270097.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:18.095Z,1513270098.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:18.475Z,1513270098.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:18.831Z,1513270098.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:19.237Z,1513270099.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:19.635Z,1513270099.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:20.091Z,1513270100.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:20.431Z,1513270100.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:20.826Z,1513270100.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:21.205Z,1513270101.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:21.653Z,1513270101.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:22.101Z,1513270102.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:22.444Z,1513270102.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:22.812Z,1513270102.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:23.218Z,1513270103.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:23.613Z,1513270103.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:24.015Z,1513270104.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:24.417Z,1513270104.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:24.856Z,1513270104.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:25.254Z,1513270105.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:25.610Z,1513270105.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:26.063Z,1513270106.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:26.442Z,1513270106.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:26.839Z,1513270106.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:27.227Z,1513270107.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:27.602Z,1513270107.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:28.068Z,1513270108.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:28.452Z,1513270108.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:28.849Z,1513270108.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:29.226Z,1513270109.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:29.618Z,1513270109.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:30.078Z,1513270110.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:30.440Z,1513270110.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:30.817Z,1513270110.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:31.242Z,1513270111.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:31.643Z,1513270111.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:32.075Z,1513270112.075 [PNI_TCM](ERROR): CRC does not match. Expected:0x55327 got:0x57344
2017-12-14T16:48:32.110Z,1513270112.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:32.463Z,1513270112.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:32.840Z,1513270112.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:33.287Z,1513270113.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:33.616Z,1513270113.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:34.087Z,1513270114.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:34.496Z,1513270114.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:34.851Z,1513270114.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:35.244Z,1513270115.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:35.636Z,1513270115.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:36.066Z,1513270116.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:36.427Z,1513270116.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x16415 got:0x36825
2017-12-14T16:48:36.486Z,1513270116.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:36.844Z,1513270116.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:37.232Z,1513270117.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:37.695Z,1513270117.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:38.002Z,1513270118.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:38.425Z,1513270118.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:38.834Z,1513270118.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:39.233Z,1513270119.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:39.619Z,1513270119.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:40.007Z,1513270120.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:40.459Z,1513270120.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:40.857Z,1513270120.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:41.240Z,1513270121.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:41.619Z,1513270121.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:42.012Z,1513270122.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:42.432Z,1513270122.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:42.825Z,1513270122.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:43.218Z,1513270123.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:43.632Z,1513270123.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:44.103Z,1513270124.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:44.447Z,1513270124.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:44.847Z,1513270124.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:45.208Z,1513270125.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:45.622Z,1513270125.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:46.060Z,1513270126.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:46.447Z,1513270126.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:46.835Z,1513270126.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:47.238Z,1513270127.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:47.636Z,1513270127.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:48.087Z,1513270128.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:48.442Z,1513270128.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:48.825Z,1513270128.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:49.234Z,1513270129.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:49.612Z,1513270129.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:50.056Z,1513270130.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:50.479Z,1513270130.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:50.833Z,1513270130.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:51.241Z,1513270131.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:51.615Z,1513270131.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:52.011Z,1513270132.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:52.435Z,1513270132.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:52.853Z,1513270132.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:53.232Z,1513270133.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:53.660Z,1513270133.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:54.027Z,1513270134.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:54.461Z,1513270134.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:54.829Z,1513270134.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:55.233Z,1513270135.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:55.624Z,1513270135.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:56.026Z,1513270136.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:56.443Z,1513270136.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:56.882Z,1513270136.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:57.223Z,1513270137.223 [PNI_TCM](ERROR): CRC does not match. Expected:0x10871 got:0x35878
2017-12-14T16:48:57.282Z,1513270137.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:57.627Z,1513270137.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:58.079Z,1513270138.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:58.456Z,1513270138.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:58.831Z,1513270138.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:59.258Z,1513270139.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:48:59.615Z,1513270139.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:00.073Z,1513270140.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:00.428Z,1513270140.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:00.829Z,1513270140.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:01.212Z,1513270141.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:01.613Z,1513270141.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:05.183Z,1513270145.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:05.318Z,1513270145.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:05.695Z,1513270145.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:06.151Z,1513270146.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:06.475Z,1513270146.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:06.878Z,1513270146.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:07.335Z,1513270147.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:07.691Z,1513270147.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:08.095Z,1513270148.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:08.487Z,1513270148.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:08.887Z,1513270148.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:09.279Z,1513270149.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:09.680Z,1513270149.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:10.083Z,1513270150.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:10.539Z,1513270150.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:10.898Z,1513270150.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:11.297Z,1513270151.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:11.682Z,1513270151.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:12.083Z,1513270152.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:12.483Z,1513270152.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:12.876Z,1513270152.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:13.284Z,1513270153.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:13.735Z,1513270153.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:14.100Z,1513270154.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:14.494Z,1513270154.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:14.887Z,1513270154.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:15.283Z,1513270155.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:15.683Z,1513270155.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:16.100Z,1513270156.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:16.492Z,1513270156.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:16.943Z,1513270156.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:17.293Z,1513270157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:17.671Z,1513270157.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:18.100Z,1513270158.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:18.488Z,1513270158.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:18.872Z,1513270158.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:19.371Z,1513270159.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:19.701Z,1513270159.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:20.203Z,1513270160.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:20.499Z,1513270160.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:20.902Z,1513270160.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:21.294Z,1513270161.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:21.670Z,1513270161.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:22.071Z,1513270162.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:22.500Z,1513270162.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:22.896Z,1513270162.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:23.343Z,1513270163.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:23.586Z,1513270163.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:23.698Z,1513270163.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:24.063Z,1513270164.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:24.382Z,1513270164.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:24.497Z,1513270164.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:24.793Z,1513270164.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:24.887Z,1513270164.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:25.271Z,1513270165.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:25.680Z,1513270165.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:26.105Z,1513270166.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:26.523Z,1513270166.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:26.879Z,1513270166.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:27.272Z,1513270167.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:27.672Z,1513270167.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:28.104Z,1513270168.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:28.118Z,1513270168.118 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:49:28.484Z,1513270168.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:28.902Z,1513270168.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:29.307Z,1513270169.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:29.717Z,1513270169.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:30.127Z,1513270170.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:30.483Z,1513270170.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:30.871Z,1513270170.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:31.277Z,1513270171.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:31.680Z,1513270171.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:32.103Z,1513270172.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:32.479Z,1513270172.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:32.878Z,1513270172.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:33.284Z,1513270173.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:33.679Z,1513270173.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:34.159Z,1513270174.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:34.479Z,1513270174.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:34.902Z,1513270174.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:35.298Z,1513270175.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:35.672Z,1513270175.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:36.078Z,1513270176.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:36.509Z,1513270176.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:36.872Z,1513270176.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:37.275Z,1513270177.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:37.590Z,1513270177.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:37.698Z,1513270177.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:38.104Z,1513270178.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:38.386Z,1513270178.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:38.483Z,1513270178.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:38.789Z,1513270178.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:38.882Z,1513270178.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:39.278Z,1513270179.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:39.762Z,1513270179.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:40.094Z,1513270180.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:40.491Z,1513270180.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:40.899Z,1513270180.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:41.340Z,1513270181.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:41.699Z,1513270181.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:42.094Z,1513270182.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:42.507Z,1513270182.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:42.905Z,1513270182.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:43.299Z,1513270183.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:43.692Z,1513270183.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:44.103Z,1513270184.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:44.491Z,1513270184.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:44.871Z,1513270184.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:45.271Z,1513270185.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:45.677Z,1513270185.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:46.155Z,1513270186.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:46.483Z,1513270186.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:46.880Z,1513270186.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:47.283Z,1513270187.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:47.683Z,1513270187.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:48.154Z,1513270188.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:48.470Z,1513270188.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:48.883Z,1513270188.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:49.327Z,1513270189.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:49.695Z,1513270189.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:50.088Z,1513270190.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:50.489Z,1513270190.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:50.883Z,1513270190.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:51.283Z,1513270191.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:51.581Z,1513270191.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:51.696Z,1513270191.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:52.081Z,1513270192.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:52.378Z,1513270192.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:52.434Z,1513270192.434 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T16:49:52.434Z,1513270192.434 [NAL9602] Data Fault, FailCount= 4
2017-12-14T16:49:52.435Z,1513270192.435 [NAL9602](ERROR): Data Fault
2017-12-14T16:49:52.524Z,1513270192.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:52.570Z,1513270192.570 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T16:49:52.789Z,1513270192.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:49:52.845Z,1513270192.845 [NAL9602](INFO): Powering down
2017-12-14T16:49:52.897Z,1513270192.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:53.283Z,1513270193.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:53.682Z,1513270193.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:53.695Z,1513270193.695 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T16:49:53.695Z,1513270193.695 [NAL9602] No Fault, FailCount= 4
2017-12-14T16:49:54.096Z,1513270194.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:54.479Z,1513270194.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:54.886Z,1513270194.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:55.288Z,1513270195.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:55.692Z,1513270195.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:56.104Z,1513270196.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:56.104Z,1513270196.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 325
2017-12-14T16:49:56.105Z,1513270196.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:49:56.110Z,1513270196.110 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:56.110Z,1513270196.110 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 325
2017-12-14T16:49:56.110Z,1513270196.110 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:49:56.112Z,1513270196.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:56.112Z,1513270196.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 325
2017-12-14T16:49:56.112Z,1513270196.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:49:56.158Z,1513270196.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:49:56.158Z,1513270196.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:49:56.158Z,1513270196.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:49:56.497Z,1513270196.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:49:56.497Z,1513270196.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 325
2017-12-14T16:49:56.498Z,1513270196.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:49:56.498Z,1513270196.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 325
2017-12-14T16:49:56.498Z,1513270196.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:49:56.498Z,1513270196.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 325
2017-12-14T16:49:56.873Z,1513270196.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:49:56.873Z,1513270196.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:49:56.874Z,1513270196.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:49:56.874Z,1513270196.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:49:56.874Z,1513270196.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:49:56.875Z,1513270196.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:49:56.875Z,1513270196.875 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:49:56.875Z,1513270196.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:49:56.876Z,1513270196.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:49:57.272Z,1513270197.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:57.670Z,1513270197.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:58.104Z,1513270198.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:58.483Z,1513270198.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:58.959Z,1513270198.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:59.268Z,1513270199.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:49:59.669Z,1513270199.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:00.119Z,1513270200.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:00.163Z,1513270200.163 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:45:00.1Z
2017-12-14T16:50:00.163Z,1513270200.163 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T16:50:00.163Z,1513270200.163 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T16:50:00.487Z,1513270200.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:01.264Z,1513270201.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:01.402Z,1513270201.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:04.913Z,1513270204.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:04.985Z,1513270204.985 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0376.lzma
2017-12-14T16:50:05.033Z,1513270205.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:05.408Z,1513270205.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:05.740Z,1513270205.740 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0376.lzma.bak
2017-12-14T16:50:05.740Z,1513270205.740 [DataOverHttps](INFO): SBD MOMSN=5439169
2017-12-14T16:50:05.823Z,1513270205.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:08.227Z,1513270208.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:08.395Z,1513270208.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:11.876Z,1513270211.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:12.068Z,1513270212.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:12.355Z,1513270212.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:12.747Z,1513270212.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:13.147Z,1513270213.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:13.548Z,1513270213.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:17.077Z,1513270217.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:17.141Z,1513270217.141 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171214T002839/Express0377.lzma
2017-12-14T16:50:17.220Z,1513270217.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:17.597Z,1513270217.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:17.908Z,1513270217.908 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0377.lzma.bak
2017-12-14T16:50:17.908Z,1513270217.908 [DataOverHttps](INFO): SBD MOMSN=5439171
2017-12-14T16:50:17.944Z,1513270217.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:19.470Z,1513270219.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:19.473Z,1513270219.473 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T16:50:19.473Z,1513270219.473 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T16:50:19.474Z,1513270219.474 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T16:50:19.608Z,1513270219.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:23.000Z,1513270223.000 [NAL9602](INFO): Powering up NAL9602
2017-12-14T16:50:23.033Z,1513270223.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:23.156Z,1513270223.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:23.536Z,1513270223.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:23.937Z,1513270223.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:24.344Z,1513270224.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:24.738Z,1513270224.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:25.178Z,1513270225.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:25.542Z,1513270225.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:25.947Z,1513270225.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:26.352Z,1513270226.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:26.742Z,1513270226.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:27.151Z,1513270227.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:27.528Z,1513270227.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:27.953Z,1513270227.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:28.351Z,1513270228.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:28.804Z,1513270228.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:29.177Z,1513270229.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:29.548Z,1513270229.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:29.946Z,1513270229.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:30.384Z,1513270230.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:30.737Z,1513270230.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:31.186Z,1513270231.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:31.306Z,1513270231.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:50:31.543Z,1513270231.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:31.935Z,1513270231.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:32.101Z,1513270232.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:50:32.421Z,1513270232.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:32.727Z,1513270232.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:33.156Z,1513270233.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:33.563Z,1513270233.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:33.898Z,1513270233.898 [NAL9602](INFO): NAL9602 initialized
2017-12-14T16:50:33.931Z,1513270233.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:34.448Z,1513270234.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:34.751Z,1513270234.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:35.149Z,1513270235.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:35.547Z,1513270235.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:35.947Z,1513270235.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:36.343Z,1513270236.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:36.737Z,1513270236.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:37.147Z,1513270237.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:37.549Z,1513270237.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:37.959Z,1513270237.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:38.363Z,1513270238.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:38.736Z,1513270238.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:39.137Z,1513270239.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:39.569Z,1513270239.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:39.955Z,1513270239.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:40.348Z,1513270240.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:40.791Z,1513270240.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:41.163Z,1513270241.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:41.549Z,1513270241.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:41.947Z,1513270241.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:42.352Z,1513270242.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:42.742Z,1513270242.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:43.144Z,1513270243.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:43.569Z,1513270243.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:44.002Z,1513270244.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:44.344Z,1513270244.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:44.771Z,1513270244.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:45.141Z,1513270245.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:45.546Z,1513270245.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:45.934Z,1513270245.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:46.444Z,1513270246.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:46.768Z,1513270246.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:47.167Z,1513270247.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:47.544Z,1513270247.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:47.944Z,1513270247.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:48.398Z,1513270248.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:48.740Z,1513270248.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:49.143Z,1513270249.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:49.559Z,1513270249.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:50.015Z,1513270250.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:50.393Z,1513270250.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:50.749Z,1513270250.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:51.150Z,1513270251.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:51.540Z,1513270251.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:52.042Z,1513270252.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:52.372Z,1513270252.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:52.743Z,1513270252.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:53.176Z,1513270253.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:53.595Z,1513270253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:54.027Z,1513270254.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:54.357Z,1513270254.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:54.736Z,1513270254.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:55.139Z,1513270255.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:55.564Z,1513270255.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:55.958Z,1513270255.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:56.344Z,1513270256.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:56.783Z,1513270256.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:57.144Z,1513270257.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:57.539Z,1513270257.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:57.940Z,1513270257.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:58.443Z,1513270258.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:58.749Z,1513270258.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:59.144Z,1513270259.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:50:59.543Z,1513270259.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:00.022Z,1513270260.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:00.408Z,1513270260.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:00.755Z,1513270260.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:01.131Z,1513270261.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:01.561Z,1513270261.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:02.005Z,1513270262.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:02.426Z,1513270262.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:02.734Z,1513270262.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:03.160Z,1513270263.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:03.551Z,1513270263.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:03.957Z,1513270263.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:04.367Z,1513270264.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:04.760Z,1513270264.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:05.162Z,1513270265.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:05.581Z,1513270265.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:05.932Z,1513270265.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:06.379Z,1513270266.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:06.749Z,1513270266.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:07.139Z,1513270267.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:07.552Z,1513270267.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:07.951Z,1513270267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:08.372Z,1513270268.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:08.763Z,1513270268.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:09.136Z,1513270269.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:09.616Z,1513270269.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:10.009Z,1513270270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:10.364Z,1513270270.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:10.756Z,1513270270.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:11.165Z,1513270271.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:11.549Z,1513270271.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:11.943Z,1513270271.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:12.338Z,1513270272.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:12.787Z,1513270272.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:13.153Z,1513270273.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:13.559Z,1513270273.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:14.011Z,1513270274.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:14.435Z,1513270274.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:14.737Z,1513270274.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:15.174Z,1513270275.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:15.536Z,1513270275.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:15.983Z,1513270275.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:16.410Z,1513270276.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:16.743Z,1513270276.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:17.156Z,1513270277.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:17.563Z,1513270277.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:17.937Z,1513270277.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:18.371Z,1513270278.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:18.770Z,1513270278.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:19.160Z,1513270279.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:19.622Z,1513270279.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:20.055Z,1513270280.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:26.620Z,1513270286.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:26.846Z,1513270286.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:27.176Z,1513270287.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:27.585Z,1513270287.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:27.980Z,1513270287.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:28.451Z,1513270288.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:28.796Z,1513270288.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:29.201Z,1513270289.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:29.563Z,1513270289.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:29.975Z,1513270289.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:30.459Z,1513270290.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:30.790Z,1513270290.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:31.198Z,1513270291.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:31.599Z,1513270291.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:32.057Z,1513270292.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:32.383Z,1513270292.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:32.769Z,1513270292.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:33.265Z,1513270293.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:33.630Z,1513270293.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:34.053Z,1513270294.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:34.379Z,1513270294.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:34.798Z,1513270294.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:35.192Z,1513270295.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:35.581Z,1513270295.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:36.048Z,1513270296.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:36.374Z,1513270296.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:36.774Z,1513270296.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:37.210Z,1513270297.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:37.572Z,1513270297.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:38.112Z,1513270298.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:38.407Z,1513270298.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:38.823Z,1513270298.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:39.181Z,1513270299.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:39.626Z,1513270299.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:39.981Z,1513270299.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:40.428Z,1513270300.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:40.794Z,1513270300.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:41.189Z,1513270301.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:41.594Z,1513270301.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:42.011Z,1513270302.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:42.399Z,1513270302.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:42.786Z,1513270302.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:43.187Z,1513270303.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:43.583Z,1513270303.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:43.993Z,1513270303.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:44.436Z,1513270304.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:44.759Z,1513270304.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:45.169Z,1513270305.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:45.562Z,1513270305.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:45.999Z,1513270305.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:46.395Z,1513270306.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:46.767Z,1513270306.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:47.163Z,1513270307.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:47.593Z,1513270307.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:48.000Z,1513270308.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:48.362Z,1513270308.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:48.815Z,1513270308.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:49.182Z,1513270309.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:49.581Z,1513270309.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:50.040Z,1513270310.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:50.364Z,1513270310.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:50.763Z,1513270310.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:51.151Z,1513270311.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:51.551Z,1513270311.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:51.948Z,1513270311.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:52.369Z,1513270312.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:52.760Z,1513270312.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:53.160Z,1513270313.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:53.551Z,1513270313.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:53.949Z,1513270313.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:54.351Z,1513270314.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:54.751Z,1513270314.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:55.150Z,1513270315.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:55.595Z,1513270315.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:55.988Z,1513270315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:56.445Z,1513270316.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:56.751Z,1513270316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:57.151Z,1513270317.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:57.543Z,1513270317.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:57.952Z,1513270317.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:58.452Z,1513270318.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:58.779Z,1513270318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:59.162Z,1513270319.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:59.575Z,1513270319.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:51:59.948Z,1513270319.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:00.351Z,1513270320.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:00.771Z,1513270320.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:01.148Z,1513270321.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:01.562Z,1513270321.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:02.064Z,1513270322.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:02.364Z,1513270322.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:02.783Z,1513270322.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:03.151Z,1513270323.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:03.549Z,1513270323.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:03.948Z,1513270323.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:04.362Z,1513270324.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:04.770Z,1513270324.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:05.167Z,1513270325.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:05.559Z,1513270325.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:05.955Z,1513270325.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:06.348Z,1513270326.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:06.752Z,1513270326.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:07.148Z,1513270327.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:07.562Z,1513270327.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:07.961Z,1513270327.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:08.370Z,1513270328.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:08.759Z,1513270328.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:09.150Z,1513270329.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:09.564Z,1513270329.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:09.942Z,1513270329.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:10.399Z,1513270330.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:10.765Z,1513270330.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:11.191Z,1513270331.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:11.555Z,1513270331.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:11.963Z,1513270331.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:12.439Z,1513270332.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:12.767Z,1513270332.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:13.186Z,1513270333.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:13.584Z,1513270333.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:14.058Z,1513270334.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:14.386Z,1513270334.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:14.761Z,1513270334.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:15.165Z,1513270335.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:15.558Z,1513270335.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:16.049Z,1513270336.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:16.370Z,1513270336.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:16.774Z,1513270336.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:17.175Z,1513270337.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:17.546Z,1513270337.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:18.099Z,1513270338.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:18.382Z,1513270338.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:18.780Z,1513270338.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:19.169Z,1513270339.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:19.571Z,1513270339.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:20.044Z,1513270340.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:20.392Z,1513270340.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:23.847Z,1513270343.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:24.013Z,1513270344.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:24.441Z,1513270344.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:24.763Z,1513270344.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:25.211Z,1513270345.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:25.552Z,1513270345.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:25.946Z,1513270345.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:26.396Z,1513270346.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:26.742Z,1513270346.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:27.132Z,1513270347.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:27.544Z,1513270347.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:28.079Z,1513270348.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:28.361Z,1513270348.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:28.732Z,1513270348.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:29.139Z,1513270349.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:29.537Z,1513270349.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:29.947Z,1513270349.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:30.359Z,1513270350.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:30.771Z,1513270350.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:31.161Z,1513270351.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:31.645Z,1513270351.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:31.929Z,1513270351.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:32.348Z,1513270352.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:32.736Z,1513270352.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:33.139Z,1513270353.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:33.578Z,1513270353.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:33.949Z,1513270353.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:34.398Z,1513270354.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:34.742Z,1513270354.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:35.133Z,1513270355.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:35.529Z,1513270355.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:35.963Z,1513270355.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:36.364Z,1513270356.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:36.786Z,1513270356.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:37.138Z,1513270357.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:37.575Z,1513270357.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:37.938Z,1513270357.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:38.435Z,1513270358.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:38.762Z,1513270358.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:39.142Z,1513270359.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:39.546Z,1513270359.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:39.946Z,1513270359.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:40.400Z,1513270360.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:40.786Z,1513270360.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:41.139Z,1513270361.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:41.538Z,1513270361.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:41.935Z,1513270361.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:42.349Z,1513270362.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:42.752Z,1513270362.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:43.159Z,1513270363.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:43.558Z,1513270363.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:44.049Z,1513270364.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:44.386Z,1513270364.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:44.735Z,1513270364.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:45.136Z,1513270365.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:45.588Z,1513270365.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:46.076Z,1513270366.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:46.371Z,1513270366.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:46.734Z,1513270366.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:47.166Z,1513270367.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:47.536Z,1513270367.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:48.042Z,1513270368.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:48.359Z,1513270368.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:48.751Z,1513270368.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:49.150Z,1513270369.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:49.536Z,1513270369.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:49.943Z,1513270369.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:50.372Z,1513270370.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:50.743Z,1513270370.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:51.132Z,1513270371.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:51.565Z,1513270371.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:51.971Z,1513270371.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:52.423Z,1513270372.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:52.723Z,1513270372.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:53.127Z,1513270373.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:53.563Z,1513270373.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:53.946Z,1513270373.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:54.382Z,1513270374.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:54.740Z,1513270374.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:55.147Z,1513270375.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:55.540Z,1513270375.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:55.938Z,1513270375.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:56.363Z,1513270376.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:56.764Z,1513270376.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:57.146Z,1513270377.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:57.146Z,1513270377.146 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 326
2017-12-14T16:52:57.147Z,1513270377.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:52:57.148Z,1513270377.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:57.148Z,1513270377.148 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 326
2017-12-14T16:52:57.148Z,1513270377.148 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:52:57.151Z,1513270377.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:57.151Z,1513270377.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 326
2017-12-14T16:52:57.151Z,1513270377.151 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:52:57.163Z,1513270377.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:52:57.163Z,1513270377.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:52:57.163Z,1513270377.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:52:57.562Z,1513270377.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:52:57.562Z,1513270377.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 326
2017-12-14T16:52:57.562Z,1513270377.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:52:57.562Z,1513270377.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 326
2017-12-14T16:52:57.563Z,1513270377.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:52:57.563Z,1513270377.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 326
2017-12-14T16:52:57.959Z,1513270377.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:52:57.959Z,1513270377.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:52:57.960Z,1513270377.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:52:57.960Z,1513270377.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:52:57.960Z,1513270377.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:52:57.961Z,1513270377.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:52:57.961Z,1513270377.961 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:52:57.962Z,1513270377.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:52:57.962Z,1513270377.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:52:58.355Z,1513270378.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:58.759Z,1513270378.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:59.132Z,1513270379.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:52:59.531Z,1513270379.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:00.056Z,1513270380.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:00.367Z,1513270380.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:00.755Z,1513270380.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:01.169Z,1513270381.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:01.572Z,1513270381.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:01.943Z,1513270381.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:02.342Z,1513270382.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:02.748Z,1513270382.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:03.143Z,1513270383.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:03.571Z,1513270383.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:04.003Z,1513270384.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:04.355Z,1513270384.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:04.740Z,1513270384.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:05.139Z,1513270385.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:05.543Z,1513270385.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:05.943Z,1513270385.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:06.430Z,1513270386.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:06.751Z,1513270386.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:07.153Z,1513270387.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:07.543Z,1513270387.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:07.952Z,1513270387.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:08.451Z,1513270388.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:08.763Z,1513270388.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:09.180Z,1513270389.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:09.563Z,1513270389.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:10.032Z,1513270390.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:10.340Z,1513270390.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:10.734Z,1513270390.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:11.138Z,1513270391.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:11.537Z,1513270391.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:11.936Z,1513270391.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:12.355Z,1513270392.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:12.794Z,1513270392.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:13.143Z,1513270393.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:13.537Z,1513270393.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:13.938Z,1513270393.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:14.347Z,1513270394.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:14.764Z,1513270394.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:15.136Z,1513270395.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:15.544Z,1513270395.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:16.044Z,1513270396.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:16.346Z,1513270396.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:16.739Z,1513270396.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:17.144Z,1513270397.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:17.541Z,1513270397.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:17.938Z,1513270397.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:18.391Z,1513270398.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:18.752Z,1513270398.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:19.147Z,1513270399.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:19.526Z,1513270399.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:19.955Z,1513270399.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:20.416Z,1513270400.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:20.737Z,1513270400.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:24.223Z,1513270404.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:24.371Z,1513270404.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:24.710Z,1513270404.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:25.135Z,1513270405.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:25.493Z,1513270405.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:25.897Z,1513270405.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:26.293Z,1513270406.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:26.698Z,1513270406.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:27.093Z,1513270407.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:27.517Z,1513270407.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:27.905Z,1513270407.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:28.307Z,1513270408.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:28.697Z,1513270408.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:29.103Z,1513270409.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:29.504Z,1513270409.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:29.902Z,1513270409.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:30.358Z,1513270410.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:30.759Z,1513270410.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:31.118Z,1513270411.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:31.515Z,1513270411.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:31.963Z,1513270411.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:32.307Z,1513270412.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:32.739Z,1513270412.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:33.100Z,1513270413.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:33.497Z,1513270413.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:33.895Z,1513270413.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:34.301Z,1513270414.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:34.709Z,1513270414.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:35.108Z,1513270415.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:35.501Z,1513270415.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:35.901Z,1513270415.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:36.299Z,1513270416.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:36.719Z,1513270416.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:37.112Z,1513270417.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:37.503Z,1513270417.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:37.902Z,1513270417.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:38.399Z,1513270418.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:38.715Z,1513270418.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:39.115Z,1513270419.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:39.503Z,1513270419.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:39.903Z,1513270419.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:40.306Z,1513270420.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:40.715Z,1513270420.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:41.147Z,1513270421.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:41.524Z,1513270421.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:41.914Z,1513270421.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:42.311Z,1513270422.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:42.717Z,1513270422.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:43.113Z,1513270423.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:43.511Z,1513270423.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:43.907Z,1513270423.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:44.307Z,1513270424.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:44.727Z,1513270424.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:45.115Z,1513270425.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:45.514Z,1513270425.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:45.919Z,1513270425.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:46.311Z,1513270426.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:46.691Z,1513270426.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:47.115Z,1513270427.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:47.491Z,1513270427.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:47.972Z,1513270427.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:48.385Z,1513270428.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:48.715Z,1513270428.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:49.112Z,1513270429.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:49.499Z,1513270429.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:49.902Z,1513270429.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:50.380Z,1513270430.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:50.708Z,1513270430.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:51.166Z,1513270431.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:51.516Z,1513270431.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:51.915Z,1513270431.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:52.297Z,1513270432.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:52.730Z,1513270432.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:53.147Z,1513270433.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:53.499Z,1513270433.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:53.955Z,1513270433.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:54.350Z,1513270434.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:54.748Z,1513270434.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:55.118Z,1513270435.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:55.503Z,1513270435.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:55.907Z,1513270435.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:56.304Z,1513270436.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:56.703Z,1513270436.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:57.106Z,1513270437.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:57.576Z,1513270437.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:57.917Z,1513270437.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:58.296Z,1513270438.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:58.693Z,1513270438.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:59.095Z,1513270439.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:59.496Z,1513270439.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:53:59.892Z,1513270439.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:00.324Z,1513270440.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:00.728Z,1513270440.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:01.108Z,1513270441.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:01.492Z,1513270441.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:01.894Z,1513270441.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:02.296Z,1513270442.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:02.702Z,1513270442.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:03.137Z,1513270443.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:03.509Z,1513270443.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:03.945Z,1513270443.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:04.340Z,1513270444.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:04.695Z,1513270444.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:05.162Z,1513270445.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:05.507Z,1513270445.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:05.902Z,1513270445.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:06.305Z,1513270446.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:06.719Z,1513270446.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:07.147Z,1513270447.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:07.507Z,1513270447.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:07.910Z,1513270447.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:08.308Z,1513270448.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:08.706Z,1513270448.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:09.112Z,1513270449.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:09.514Z,1513270449.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:09.911Z,1513270449.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:10.335Z,1513270450.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:10.695Z,1513270450.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:11.099Z,1513270451.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:11.498Z,1513270451.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:11.903Z,1513270451.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:12.308Z,1513270452.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:12.708Z,1513270452.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:13.112Z,1513270453.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:13.546Z,1513270453.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:13.896Z,1513270453.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:14.311Z,1513270454.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:14.702Z,1513270454.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:15.183Z,1513270455.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:15.515Z,1513270455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:15.954Z,1513270455.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:16.359Z,1513270456.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:16.784Z,1513270456.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:17.093Z,1513270457.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:17.494Z,1513270457.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:17.896Z,1513270457.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:18.296Z,1513270458.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:18.716Z,1513270458.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:19.113Z,1513270459.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:19.507Z,1513270459.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:19.955Z,1513270459.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:20.316Z,1513270460.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:20.692Z,1513270460.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:21.115Z,1513270461.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:24.618Z,1513270464.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:24.767Z,1513270464.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:25.119Z,1513270465.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:25.490Z,1513270465.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:26.038Z,1513270466.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:26.298Z,1513270466.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:26.704Z,1513270466.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:27.103Z,1513270467.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:27.499Z,1513270467.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:27.903Z,1513270467.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:28.292Z,1513270468.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:28.690Z,1513270468.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:29.104Z,1513270469.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:29.504Z,1513270469.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:29.963Z,1513270469.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:30.292Z,1513270470.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:30.703Z,1513270470.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:31.101Z,1513270471.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:31.502Z,1513270471.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:31.903Z,1513270471.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:32.378Z,1513270472.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:32.707Z,1513270472.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:33.162Z,1513270473.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:33.510Z,1513270473.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:33.915Z,1513270473.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:34.294Z,1513270474.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:34.690Z,1513270474.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:35.103Z,1513270475.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:35.502Z,1513270475.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:35.896Z,1513270475.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:36.347Z,1513270476.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:36.694Z,1513270476.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:37.159Z,1513270477.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:37.496Z,1513270477.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:37.931Z,1513270477.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:38.307Z,1513270478.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:38.747Z,1513270478.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:39.119Z,1513270479.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:39.535Z,1513270479.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:39.895Z,1513270479.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:40.295Z,1513270480.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:40.699Z,1513270480.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:41.100Z,1513270481.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:41.500Z,1513270481.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:41.907Z,1513270481.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:42.295Z,1513270482.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:42.697Z,1513270482.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:43.156Z,1513270483.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:43.498Z,1513270483.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:43.904Z,1513270483.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:44.387Z,1513270484.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:44.711Z,1513270484.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:45.097Z,1513270485.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:45.498Z,1513270485.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:45.897Z,1513270485.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:46.395Z,1513270486.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:46.707Z,1513270486.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:47.153Z,1513270487.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:47.507Z,1513270487.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:47.885Z,1513270487.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:48.316Z,1513270488.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:48.691Z,1513270488.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:49.116Z,1513270489.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:49.518Z,1513270489.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:49.896Z,1513270489.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:50.299Z,1513270490.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:50.688Z,1513270490.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:51.090Z,1513270491.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:51.490Z,1513270491.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:51.891Z,1513270491.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:52.292Z,1513270492.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:52.728Z,1513270492.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:53.103Z,1513270493.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:53.487Z,1513270493.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:53.899Z,1513270493.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:54.299Z,1513270494.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:54.699Z,1513270494.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:55.144Z,1513270495.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:55.511Z,1513270495.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:55.948Z,1513270495.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:56.295Z,1513270496.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:56.698Z,1513270496.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:57.093Z,1513270497.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:57.491Z,1513270497.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:57.893Z,1513270497.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:58.389Z,1513270498.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:58.717Z,1513270498.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:59.218Z,1513270499.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:59.499Z,1513270499.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:54:59.926Z,1513270499.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:00.383Z,1513270500.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:00.723Z,1513270500.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:01.108Z,1513270501.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:01.512Z,1513270501.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:01.911Z,1513270501.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:02.287Z,1513270502.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:02.695Z,1513270502.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:03.088Z,1513270503.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:03.489Z,1513270503.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:03.899Z,1513270503.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:04.292Z,1513270504.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:04.703Z,1513270504.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:05.103Z,1513270505.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:05.528Z,1513270505.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:05.931Z,1513270505.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:06.304Z,1513270506.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:06.691Z,1513270506.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:07.092Z,1513270507.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:07.521Z,1513270507.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:07.896Z,1513270507.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:08.295Z,1513270508.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:08.779Z,1513270508.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:09.103Z,1513270509.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:09.503Z,1513270509.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:09.896Z,1513270509.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:10.300Z,1513270510.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:10.708Z,1513270510.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:11.119Z,1513270511.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:11.497Z,1513270511.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:11.990Z,1513270511.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:12.295Z,1513270512.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:12.709Z,1513270512.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:13.107Z,1513270513.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:13.500Z,1513270513.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:13.904Z,1513270513.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:14.294Z,1513270514.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:14.703Z,1513270514.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:15.143Z,1513270515.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:15.503Z,1513270515.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:15.906Z,1513270515.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:16.309Z,1513270516.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:16.710Z,1513270516.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:17.117Z,1513270517.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:17.491Z,1513270517.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:17.890Z,1513270517.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:18.344Z,1513270518.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:18.690Z,1513270518.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:19.123Z,1513270519.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:19.503Z,1513270519.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:19.896Z,1513270519.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:19.900Z,1513270519.900 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T16:55:19.900Z,1513270519.900 [Default:CheckIn:C.Wait] Stopped
2017-12-14T16:55:19.900Z,1513270519.900 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T16:55:19.900Z,1513270519.900 [Default:CheckIn:D] Running Loop=1
2017-12-14T16:55:20.295Z,1513270520.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:20.298Z,1513270520.298 [Default:CheckIn:D] Stopped
2017-12-14T16:55:20.298Z,1513270520.298 [Default:CheckIn:E] Running Loop=1
2017-12-14T16:55:20.758Z,1513270520.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:20.770Z,1513270520.770 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 982.081771 min 
2017-12-14T16:55:20.770Z,1513270520.770 [Default:CheckIn:E] Stopped
2017-12-14T16:55:20.770Z,1513270520.770 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T16:55:20.770Z,1513270520.770 [Default:CheckIn] Stopped
2017-12-14T16:55:20.771Z,1513270520.771 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T16:55:20.771Z,1513270520.771 [Default:CheckIn](INFO): Running loop #95
2017-12-14T16:55:20.771Z,1513270520.771 [Default:CheckIn] Running Loop=95
2017-12-14T16:55:20.771Z,1513270520.771 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T16:55:20.771Z,1513270520.771 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T16:55:21.140Z,1513270521.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:24.655Z,1513270524.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:24.839Z,1513270524.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:25.194Z,1513270525.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:25.636Z,1513270525.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:25.998Z,1513270525.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:26.470Z,1513270526.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:26.784Z,1513270526.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:27.195Z,1513270527.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:27.584Z,1513270527.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:28.026Z,1513270528.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:28.446Z,1513270528.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:28.815Z,1513270528.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:29.194Z,1513270529.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:29.592Z,1513270529.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:30.064Z,1513270530.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:30.404Z,1513270530.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:30.787Z,1513270530.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:31.258Z,1513270531.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:31.576Z,1513270531.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:32.056Z,1513270532.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:32.384Z,1513270532.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:32.775Z,1513270532.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:33.184Z,1513270533.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:33.591Z,1513270533.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:34.057Z,1513270534.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:34.448Z,1513270534.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:34.830Z,1513270534.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:35.179Z,1513270535.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:35.578Z,1513270535.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:36.064Z,1513270536.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:36.377Z,1513270536.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:36.781Z,1513270536.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:37.187Z,1513270537.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:37.664Z,1513270537.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:37.978Z,1513270537.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:38.386Z,1513270538.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:38.783Z,1513270538.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:39.189Z,1513270539.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:39.588Z,1513270539.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:39.986Z,1513270539.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:40.430Z,1513270540.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:40.799Z,1513270540.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:41.166Z,1513270541.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:41.572Z,1513270541.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:41.998Z,1513270541.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:42.452Z,1513270542.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:42.799Z,1513270542.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:43.214Z,1513270543.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:43.572Z,1513270543.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:44.085Z,1513270544.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:44.407Z,1513270544.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:44.783Z,1513270544.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:45.191Z,1513270545.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:45.595Z,1513270545.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:46.075Z,1513270546.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:46.398Z,1513270546.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:46.827Z,1513270546.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:47.185Z,1513270547.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:47.583Z,1513270547.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:48.053Z,1513270548.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:48.405Z,1513270548.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:48.796Z,1513270548.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:49.192Z,1513270549.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:49.573Z,1513270549.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:50.036Z,1513270550.036 [BPC1](ERROR): Failed to receive battery data
2017-12-14T16:55:50.036Z,1513270550.036 [BPC1] Communications Fault, FailCount= 1
2017-12-14T16:55:50.036Z,1513270550.036 [BPC1](ERROR): Communications Fault
2017-12-14T16:55:50.052Z,1513270550.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:50.098Z,1513270550.098 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T16:55:50.449Z,1513270550.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:50.779Z,1513270550.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:51.216Z,1513270551.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:51.230Z,1513270551.230 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:55:51.230Z,1513270551.230 [BPC1] No Fault, FailCount= 1
2017-12-14T16:55:51.647Z,1513270551.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:51.988Z,1513270551.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:52.390Z,1513270552.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:52.788Z,1513270552.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:53.193Z,1513270553.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:53.611Z,1513270553.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:53.973Z,1513270553.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:54.446Z,1513270554.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:54.810Z,1513270554.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:55.209Z,1513270555.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:55.593Z,1513270555.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:55.977Z,1513270555.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:56.440Z,1513270556.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:56.835Z,1513270556.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:57.192Z,1513270557.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:57.599Z,1513270557.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:58.048Z,1513270558.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:58.048Z,1513270558.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 327
2017-12-14T16:55:58.048Z,1513270558.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:55:58.050Z,1513270558.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:58.051Z,1513270558.051 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 327
2017-12-14T16:55:58.051Z,1513270558.051 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:55:58.052Z,1513270558.052 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:58.053Z,1513270558.053 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 327
2017-12-14T16:55:58.053Z,1513270558.053 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:55:58.079Z,1513270558.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:55:58.079Z,1513270558.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:55:58.079Z,1513270558.079 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:55:58.411Z,1513270558.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:55:58.411Z,1513270558.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 327
2017-12-14T16:55:58.412Z,1513270558.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:55:58.412Z,1513270558.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 327
2017-12-14T16:55:58.412Z,1513270558.412 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:55:58.412Z,1513270558.412 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 327
2017-12-14T16:55:58.778Z,1513270558.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:55:58.779Z,1513270558.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:55:58.779Z,1513270558.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:55:58.779Z,1513270558.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:55:58.780Z,1513270558.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:55:58.780Z,1513270558.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:55:58.780Z,1513270558.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:55:58.789Z,1513270558.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:55:58.789Z,1513270558.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:55:59.188Z,1513270559.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:55:59.582Z,1513270559.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:00.095Z,1513270560.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:00.403Z,1513270560.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:00.794Z,1513270560.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:01.194Z,1513270561.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:01.573Z,1513270561.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:02.056Z,1513270562.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:02.422Z,1513270562.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:02.785Z,1513270562.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:03.188Z,1513270563.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:03.596Z,1513270563.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:04.064Z,1513270564.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:04.394Z,1513270564.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:04.773Z,1513270564.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:05.186Z,1513270565.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:05.582Z,1513270565.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:05.982Z,1513270565.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:06.437Z,1513270566.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:06.787Z,1513270566.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:07.187Z,1513270567.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:07.581Z,1513270567.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:07.976Z,1513270567.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:08.472Z,1513270568.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:08.809Z,1513270568.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:09.211Z,1513270569.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:09.624Z,1513270569.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:10.009Z,1513270570.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:10.451Z,1513270570.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:10.828Z,1513270570.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:11.176Z,1513270571.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:11.587Z,1513270571.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:12.060Z,1513270572.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:12.427Z,1513270572.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:12.819Z,1513270572.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:13.216Z,1513270573.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:13.578Z,1513270573.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:14.028Z,1513270574.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:14.387Z,1513270574.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:14.787Z,1513270574.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:15.191Z,1513270575.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:15.592Z,1513270575.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:16.100Z,1513270576.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:16.387Z,1513270576.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:16.786Z,1513270576.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:17.188Z,1513270577.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:17.582Z,1513270577.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:18.039Z,1513270578.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:18.383Z,1513270578.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:18.780Z,1513270578.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:19.224Z,1513270579.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:19.577Z,1513270579.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:19.998Z,1513270579.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:20.403Z,1513270580.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:20.791Z,1513270580.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:21.234Z,1513270581.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:28.324Z,1513270588.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:28.495Z,1513270588.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:28.871Z,1513270588.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:29.356Z,1513270589.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:29.656Z,1513270589.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:30.105Z,1513270590.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:30.450Z,1513270590.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:30.899Z,1513270590.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:31.250Z,1513270591.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:31.659Z,1513270591.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:32.102Z,1513270592.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:32.467Z,1513270592.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:32.871Z,1513270592.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:33.252Z,1513270593.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:33.663Z,1513270593.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:34.080Z,1513270594.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x2935 got:0x40179
2017-12-14T16:56:34.120Z,1513270594.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:34.441Z,1513270594.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:34.837Z,1513270594.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:35.241Z,1513270595.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:35.639Z,1513270595.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:36.036Z,1513270596.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:36.463Z,1513270596.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:36.859Z,1513270596.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:37.246Z,1513270597.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:37.647Z,1513270597.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:38.043Z,1513270598.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:38.457Z,1513270598.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:38.943Z,1513270598.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:39.259Z,1513270599.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:39.695Z,1513270599.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:40.071Z,1513270600.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:40.486Z,1513270600.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:40.843Z,1513270600.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:41.227Z,1513270601.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:41.715Z,1513270601.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:42.117Z,1513270602.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:42.475Z,1513270602.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:42.851Z,1513270602.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:43.266Z,1513270603.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:43.627Z,1513270603.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x11003 got:0x48190
2017-12-14T16:56:43.663Z,1513270603.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:44.048Z,1513270604.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:44.437Z,1513270604.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:44.863Z,1513270604.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:45.234Z,1513270605.234 [PNI_TCM](ERROR): CRC does not match. Expected:0x33362 got:0x44816
2017-12-14T16:56:45.270Z,1513270605.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:45.651Z,1513270605.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:46.075Z,1513270606.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:46.450Z,1513270606.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:46.868Z,1513270606.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:47.248Z,1513270607.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:47.642Z,1513270607.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:48.090Z,1513270608.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:48.488Z,1513270608.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:48.860Z,1513270608.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:49.250Z,1513270609.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:49.656Z,1513270609.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:50.042Z,1513270610.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:50.467Z,1513270610.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:50.883Z,1513270610.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:51.264Z,1513270611.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:51.700Z,1513270611.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:52.092Z,1513270612.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:52.466Z,1513270612.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:52.897Z,1513270612.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:53.271Z,1513270613.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:53.640Z,1513270613.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:54.072Z,1513270614.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:54.448Z,1513270614.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:54.852Z,1513270614.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:55.260Z,1513270615.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:55.657Z,1513270615.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:56.123Z,1513270616.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:56.474Z,1513270616.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:56.879Z,1513270616.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:57.248Z,1513270617.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:57.666Z,1513270617.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:58.096Z,1513270618.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:58.511Z,1513270618.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:58.860Z,1513270618.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:59.248Z,1513270619.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:56:59.663Z,1513270619.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:00.103Z,1513270620.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:00.451Z,1513270620.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:00.856Z,1513270620.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:01.271Z,1513270621.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:01.680Z,1513270621.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:02.108Z,1513270622.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:02.468Z,1513270622.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:02.945Z,1513270622.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:03.282Z,1513270623.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:03.657Z,1513270623.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:04.110Z,1513270624.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:04.505Z,1513270624.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:04.887Z,1513270624.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:05.252Z,1513270625.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:05.659Z,1513270625.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:06.086Z,1513270626.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:06.504Z,1513270626.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:06.844Z,1513270626.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:07.274Z,1513270627.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:07.628Z,1513270627.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:08.108Z,1513270628.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:08.475Z,1513270628.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:08.867Z,1513270628.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:09.251Z,1513270629.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:09.674Z,1513270629.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:10.115Z,1513270630.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:10.452Z,1513270630.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:10.835Z,1513270630.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:11.232Z,1513270631.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:11.636Z,1513270631.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:12.092Z,1513270632.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:12.483Z,1513270632.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:12.839Z,1513270632.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:13.264Z,1513270633.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:13.651Z,1513270633.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:14.086Z,1513270634.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:14.450Z,1513270634.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:14.843Z,1513270634.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:15.259Z,1513270635.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:15.690Z,1513270635.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:16.103Z,1513270636.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:16.432Z,1513270636.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:16.855Z,1513270636.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:17.239Z,1513270637.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:17.639Z,1513270637.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:18.036Z,1513270638.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:18.474Z,1513270638.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:18.883Z,1513270638.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:19.323Z,1513270639.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:19.637Z,1513270639.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:20.047Z,1513270640.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:20.449Z,1513270640.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:20.851Z,1513270640.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:21.243Z,1513270641.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:24.883Z,1513270644.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:25.055Z,1513270645.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:25.391Z,1513270645.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:25.797Z,1513270645.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:26.230Z,1513270646.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:26.594Z,1513270646.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:27.028Z,1513270647.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:27.400Z,1513270647.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:27.807Z,1513270647.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:28.195Z,1513270648.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:28.595Z,1513270648.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:29.011Z,1513270649.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:29.406Z,1513270649.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:29.808Z,1513270649.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:30.198Z,1513270650.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:30.595Z,1513270650.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:31.005Z,1513270651.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:31.411Z,1513270651.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:31.810Z,1513270651.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:32.203Z,1513270652.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:32.602Z,1513270652.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:33.011Z,1513270653.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:33.409Z,1513270653.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:33.810Z,1513270653.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:34.202Z,1513270654.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:34.631Z,1513270654.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:35.016Z,1513270655.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:35.449Z,1513270655.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:35.815Z,1513270655.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:36.214Z,1513270656.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:36.591Z,1513270656.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:37.017Z,1513270657.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:37.404Z,1513270657.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:37.877Z,1513270657.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:38.189Z,1513270658.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:38.696Z,1513270658.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:38.991Z,1513270658.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:39.395Z,1513270659.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:39.791Z,1513270659.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:40.197Z,1513270660.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:40.621Z,1513270660.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:41.004Z,1513270661.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:41.397Z,1513270661.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:41.793Z,1513270661.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:42.203Z,1513270662.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:42.596Z,1513270662.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:43.003Z,1513270663.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:43.411Z,1513270663.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:43.811Z,1513270663.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:44.244Z,1513270664.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:44.594Z,1513270664.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:45.008Z,1513270665.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:45.415Z,1513270665.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:45.847Z,1513270665.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:46.198Z,1513270666.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:46.602Z,1513270666.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:47.003Z,1513270667.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:47.523Z,1513270667.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:47.811Z,1513270667.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:48.213Z,1513270668.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:48.623Z,1513270668.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:49.015Z,1513270669.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:49.440Z,1513270669.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:49.813Z,1513270669.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:50.211Z,1513270670.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:50.656Z,1513270670.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:51.013Z,1513270671.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:51.419Z,1513270671.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:51.813Z,1513270671.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:52.192Z,1513270672.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:52.591Z,1513270672.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:53.013Z,1513270673.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:53.407Z,1513270673.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:53.831Z,1513270673.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:54.196Z,1513270674.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:54.591Z,1513270674.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:54.996Z,1513270674.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:55.421Z,1513270675.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:55.804Z,1513270675.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:56.198Z,1513270676.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:56.592Z,1513270676.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:57.024Z,1513270677.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:57.426Z,1513270677.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:57.884Z,1513270677.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:58.190Z,1513270678.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:58.594Z,1513270678.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:58.995Z,1513270678.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:59.395Z,1513270679.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:57:59.797Z,1513270679.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:00.262Z,1513270680.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:00.606Z,1513270680.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:01.005Z,1513270681.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:01.393Z,1513270681.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:01.799Z,1513270681.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:02.198Z,1513270682.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:02.601Z,1513270682.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:03.006Z,1513270683.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:03.419Z,1513270683.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:03.823Z,1513270683.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:04.213Z,1513270684.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:04.607Z,1513270684.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:05.012Z,1513270685.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:05.419Z,1513270685.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:05.811Z,1513270685.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:06.212Z,1513270686.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:06.631Z,1513270686.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:07.020Z,1513270687.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:07.400Z,1513270687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:07.822Z,1513270687.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:08.192Z,1513270688.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:08.626Z,1513270688.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:09.001Z,1513270689.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:09.400Z,1513270689.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:09.879Z,1513270689.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:10.206Z,1513270690.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:10.631Z,1513270690.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:11.001Z,1513270691.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:11.428Z,1513270691.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:11.805Z,1513270691.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:12.203Z,1513270692.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:12.598Z,1513270692.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:13.007Z,1513270693.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:13.431Z,1513270693.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:13.806Z,1513270693.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:14.195Z,1513270694.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:14.603Z,1513270694.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:15.021Z,1513270695.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:15.403Z,1513270695.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:15.796Z,1513270695.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:16.248Z,1513270696.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:16.592Z,1513270696.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:17.015Z,1513270697.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:17.409Z,1513270697.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:17.812Z,1513270697.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:18.192Z,1513270698.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:18.594Z,1513270698.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:19.003Z,1513270699.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:19.487Z,1513270699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:19.803Z,1513270699.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:20.200Z,1513270700.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:20.599Z,1513270700.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:20.997Z,1513270700.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:21.401Z,1513270701.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:24.891Z,1513270704.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:25.055Z,1513270705.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:25.396Z,1513270705.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:25.791Z,1513270705.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:26.188Z,1513270706.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:26.624Z,1513270706.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:27.007Z,1513270707.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:27.407Z,1513270707.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:27.808Z,1513270707.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:28.187Z,1513270708.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:28.590Z,1513270708.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:28.995Z,1513270708.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:29.407Z,1513270709.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:29.826Z,1513270709.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:30.196Z,1513270710.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:30.589Z,1513270710.589 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T16:58:30.589Z,1513270710.589 [BPC1] Data Fault, FailCount= 1
2017-12-14T16:58:30.589Z,1513270710.589 [BPC1](ERROR): Data Fault
2017-12-14T16:58:30.597Z,1513270710.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:30.610Z,1513270710.610 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T16:58:31.007Z,1513270711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:31.392Z,1513270711.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:31.788Z,1513270711.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:31.801Z,1513270711.801 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T16:58:31.802Z,1513270711.802 [BPC1] No Fault, FailCount= 1
2017-12-14T16:58:32.247Z,1513270712.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:32.607Z,1513270712.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:33.013Z,1513270713.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:33.391Z,1513270713.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:33.805Z,1513270713.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:34.186Z,1513270714.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:34.594Z,1513270714.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:34.991Z,1513270714.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:35.402Z,1513270715.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:35.806Z,1513270715.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:36.234Z,1513270716.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:36.599Z,1513270716.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:37.003Z,1513270717.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:37.395Z,1513270717.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:37.791Z,1513270717.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:38.198Z,1513270718.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:38.600Z,1513270718.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:39.007Z,1513270719.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:39.444Z,1513270719.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:39.789Z,1513270719.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:40.197Z,1513270720.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:40.638Z,1513270720.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:40.999Z,1513270720.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:41.402Z,1513270721.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:41.805Z,1513270721.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:42.201Z,1513270722.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:42.683Z,1513270722.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:42.995Z,1513270722.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:43.393Z,1513270723.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:43.791Z,1513270723.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:44.199Z,1513270724.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:44.627Z,1513270724.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:44.998Z,1513270724.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:45.396Z,1513270725.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:45.814Z,1513270725.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:46.203Z,1513270726.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:46.580Z,1513270726.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:47.007Z,1513270727.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:47.406Z,1513270727.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:47.804Z,1513270727.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:48.200Z,1513270728.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:48.579Z,1513270728.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:49.059Z,1513270729.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:49.411Z,1513270729.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:49.812Z,1513270729.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:50.207Z,1513270730.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:50.586Z,1513270730.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:51.013Z,1513270731.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:51.419Z,1513270731.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:51.813Z,1513270731.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:52.266Z,1513270732.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:52.674Z,1513270732.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:53.025Z,1513270733.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:53.423Z,1513270733.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:53.794Z,1513270733.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:54.216Z,1513270734.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:54.595Z,1513270734.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:55.017Z,1513270735.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:55.422Z,1513270735.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:55.799Z,1513270735.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:56.187Z,1513270736.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:56.589Z,1513270736.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:56.992Z,1513270736.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:57.396Z,1513270737.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:57.792Z,1513270737.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:58.194Z,1513270738.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:58.636Z,1513270738.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:58.000Z,1513270739.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:58.000Z,1513270739.000 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 328
2017-12-14T16:58:58.000Z,1513270739.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T16:58:59.002Z,1513270739.002 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:59.002Z,1513270739.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 328
2017-12-14T16:58:59.002Z,1513270739.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T16:58:59.004Z,1513270739.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:58:59.004Z,1513270739.004 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 328
2017-12-14T16:58:59.004Z,1513270739.004 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T16:58:59.023Z,1513270739.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T16:58:59.023Z,1513270739.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T16:58:59.024Z,1513270739.024 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T16:58:59.422Z,1513270739.422 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T16:58:59.422Z,1513270739.422 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 328
2017-12-14T16:58:59.423Z,1513270739.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T16:58:59.423Z,1513270739.423 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 328
2017-12-14T16:58:59.423Z,1513270739.423 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T16:58:59.423Z,1513270739.423 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 328
2017-12-14T16:58:59.797Z,1513270739.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T16:58:59.798Z,1513270739.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:58:59.798Z,1513270739.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:58:59.798Z,1513270739.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T16:58:59.799Z,1513270739.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:58:59.799Z,1513270739.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:58:59.799Z,1513270739.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T16:58:59.800Z,1513270739.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T16:58:59.800Z,1513270739.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T16:59:00.201Z,1513270740.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:00.587Z,1513270740.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:01.005Z,1513270741.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:01.400Z,1513270741.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:01.804Z,1513270741.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:02.189Z,1513270742.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:02.632Z,1513270742.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:03.011Z,1513270743.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:03.401Z,1513270743.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:03.795Z,1513270743.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:04.197Z,1513270744.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:04.588Z,1513270744.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:05.011Z,1513270745.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:05.467Z,1513270745.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:05.797Z,1513270745.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:06.200Z,1513270746.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:06.590Z,1513270746.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:06.998Z,1513270746.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:07.411Z,1513270747.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:07.805Z,1513270747.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:08.190Z,1513270748.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:08.625Z,1513270748.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:09.008Z,1513270749.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:09.404Z,1513270749.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:09.801Z,1513270749.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:10.199Z,1513270750.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:10.592Z,1513270750.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:10.996Z,1513270750.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:11.400Z,1513270751.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:11.851Z,1513270751.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:12.187Z,1513270752.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:12.603Z,1513270752.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:12.984Z,1513270752.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:13.411Z,1513270753.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:13.785Z,1513270753.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:14.258Z,1513270754.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:14.637Z,1513270754.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:15.075Z,1513270755.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:15.415Z,1513270755.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:15.785Z,1513270755.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:16.219Z,1513270756.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:16.589Z,1513270756.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:16.999Z,1513270756.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:17.397Z,1513270757.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:17.790Z,1513270757.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:18.226Z,1513270758.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:18.588Z,1513270758.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:18.999Z,1513270758.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:19.396Z,1513270759.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:19.824Z,1513270759.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:20.191Z,1513270760.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:20.594Z,1513270760.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:20.993Z,1513270760.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:21.451Z,1513270761.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:21.793Z,1513270761.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:25.420Z,1513270765.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:25.543Z,1513270765.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:25.602Z,1513270765.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:59:25.896Z,1513270765.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:26.381Z,1513270766.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:26.398Z,1513270766.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:59:26.712Z,1513270766.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:26.823Z,1513270766.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T16:59:27.103Z,1513270767.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:27.502Z,1513270767.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:27.909Z,1513270767.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:28.301Z,1513270768.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:28.326Z,1513270768.326 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T16:59:28.710Z,1513270768.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:29.115Z,1513270769.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:29.488Z,1513270769.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:29.887Z,1513270769.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:30.313Z,1513270770.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:30.715Z,1513270770.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:31.120Z,1513270771.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:31.518Z,1513270771.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:31.912Z,1513270771.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:32.291Z,1513270772.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:32.689Z,1513270772.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:33.146Z,1513270773.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:33.488Z,1513270773.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:33.890Z,1513270773.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:34.319Z,1513270774.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:34.720Z,1513270774.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:35.120Z,1513270775.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:35.492Z,1513270775.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:35.892Z,1513270775.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:36.291Z,1513270776.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:36.689Z,1513270776.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:37.100Z,1513270777.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:37.590Z,1513270777.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:37.919Z,1513270777.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:38.373Z,1513270778.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:38.690Z,1513270778.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:39.123Z,1513270779.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:39.490Z,1513270779.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:39.889Z,1513270779.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:40.407Z,1513270780.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:40.719Z,1513270780.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:41.105Z,1513270781.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:41.503Z,1513270781.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:41.889Z,1513270781.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:42.313Z,1513270782.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:42.695Z,1513270782.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:43.123Z,1513270783.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:43.500Z,1513270783.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:43.899Z,1513270783.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:44.395Z,1513270784.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:44.699Z,1513270784.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:45.093Z,1513270785.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:45.492Z,1513270785.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:45.895Z,1513270785.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:46.300Z,1513270786.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:46.736Z,1513270786.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:47.102Z,1513270787.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:47.537Z,1513270787.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:47.899Z,1513270787.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:48.293Z,1513270788.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:48.698Z,1513270788.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:49.115Z,1513270789.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:49.507Z,1513270789.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:49.920Z,1513270789.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:50.305Z,1513270790.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:50.698Z,1513270790.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:51.099Z,1513270791.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:51.454Z,1513270791.454 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T16:59:51.454Z,1513270791.454 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T16:59:51.454Z,1513270791.454 [DropWeight](ERROR): Hardware Fault
2017-12-14T16:59:51.509Z,1513270791.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:51.520Z,1513270791.520 [CBIT](INFO): Critical error at 20171214T165951
2017-12-14T16:59:51.547Z,1513270791.547 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T16:59:51.547Z,1513270791.547 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T16:59:51.895Z,1513270791.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:51.907Z,1513270791.907 [CBIT](INFO): Critical error at 20171214T165951
2017-12-14T16:59:52.352Z,1513270792.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:52.716Z,1513270792.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:53.120Z,1513270793.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:53.492Z,1513270793.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:53.889Z,1513270793.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:54.293Z,1513270794.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:54.702Z,1513270794.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:55.107Z,1513270795.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:55.509Z,1513270795.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:55.899Z,1513270795.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:56.298Z,1513270796.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:56.687Z,1513270796.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:57.095Z,1513270797.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:57.496Z,1513270797.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:57.904Z,1513270797.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:58.314Z,1513270798.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:58.720Z,1513270798.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:59.111Z,1513270799.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T16:59:59.487Z,1513270799.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:00.027Z,1513270800.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:00.290Z,1513270800.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:00.718Z,1513270800.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:01.093Z,1513270801.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:01.527Z,1513270801.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:01.903Z,1513270801.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:02.304Z,1513270802.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:02.701Z,1513270802.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:03.101Z,1513270803.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:03.499Z,1513270803.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:03.893Z,1513270803.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:04.307Z,1513270804.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:04.705Z,1513270804.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:05.100Z,1513270805.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:05.499Z,1513270805.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:05.896Z,1513270805.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:06.342Z,1513270806.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:06.688Z,1513270806.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:07.112Z,1513270807.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:07.507Z,1513270807.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:07.958Z,1513270807.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:08.325Z,1513270808.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:08.688Z,1513270808.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:09.088Z,1513270809.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:09.495Z,1513270809.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:09.935Z,1513270809.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:10.303Z,1513270810.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:10.706Z,1513270810.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:11.107Z,1513270811.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:11.494Z,1513270811.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:11.901Z,1513270811.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:12.303Z,1513270812.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:12.721Z,1513270812.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:13.109Z,1513270813.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:13.519Z,1513270813.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:13.910Z,1513270813.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:14.299Z,1513270814.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:14.735Z,1513270814.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:15.094Z,1513270815.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:15.493Z,1513270815.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:15.908Z,1513270815.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:16.313Z,1513270816.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:16.714Z,1513270816.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:17.115Z,1513270817.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:17.488Z,1513270817.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:17.890Z,1513270817.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:18.292Z,1513270818.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:18.695Z,1513270818.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:19.100Z,1513270819.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:19.496Z,1513270819.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:19.590Z,1513270819.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:19.922Z,1513270819.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:20.291Z,1513270820.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:20.386Z,1513270820.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:20.698Z,1513270820.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:20.813Z,1513270820.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:21.097Z,1513270821.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:21.101Z,1513270821.101 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T16:55:20.8Z
2017-12-14T17:00:21.101Z,1513270821.101 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:00:21.101Z,1513270821.101 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:00:21.515Z,1513270821.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:21.612Z,1513270821.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:22.264Z,1513270822.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:22.410Z,1513270822.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:22.823Z,1513270822.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:23.618Z,1513270823.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:24.419Z,1513270824.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:24.825Z,1513270824.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:25.622Z,1513270825.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:25.706Z,1513270825.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:25.786Z,1513270825.786 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0380.lzma
2017-12-14T17:00:25.864Z,1513270825.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:26.256Z,1513270826.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:26.417Z,1513270826.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:26.564Z,1513270826.564 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0380.lzma.bak
2017-12-14T17:00:26.564Z,1513270826.564 [DataOverHttps](INFO): SBD MOMSN=5439194
2017-12-14T17:00:26.611Z,1513270826.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:26.821Z,1513270826.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:27.620Z,1513270827.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:27.751Z,1513270827.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:27.886Z,1513270827.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:28.413Z,1513270828.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:28.817Z,1513270828.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:31.254Z,1513270831.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:31.411Z,1513270831.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:31.728Z,1513270831.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:32.187Z,1513270832.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:32.528Z,1513270832.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:32.926Z,1513270832.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:33.605Z,1513270833.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:34.402Z,1513270834.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:34.809Z,1513270834.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:35.606Z,1513270835.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:36.313Z,1513270836.313 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:00:36.313Z,1513270836.313 [NAL9602] Data Fault, FailCount= 5
2017-12-14T17:00:36.314Z,1513270836.314 [NAL9602](ERROR): Data Fault
2017-12-14T17:00:36.403Z,1513270836.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:36.456Z,1513270836.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:36.472Z,1513270836.472 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:00:36.472Z,1513270836.472 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T17:00:36.545Z,1513270836.545 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20171214T002839/Express0381.lzma
2017-12-14T17:00:36.549Z,1513270836.549 [NAL9602](INFO): Powering down
2017-12-14T17:00:36.582Z,1513270836.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:36.610Z,1513270836.610 [CBIT](INFO): Critical error at 20171214T170036
2017-12-14T17:00:36.821Z,1513270836.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:37.013Z,1513270837.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:37.288Z,1513270837.288 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0381.lzma.bak
2017-12-14T17:00:37.288Z,1513270837.288 [DataOverHttps](INFO): SBD MOMSN=5439198
2017-12-14T17:00:37.350Z,1513270837.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:37.618Z,1513270837.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:38.414Z,1513270838.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:38.766Z,1513270838.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:38.774Z,1513270838.774 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:00:38.774Z,1513270838.774 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:00:38.774Z,1513270838.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:00:38.818Z,1513270838.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:38.874Z,1513270838.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:39.616Z,1513270839.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:40.410Z,1513270840.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:40.829Z,1513270840.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:00:42.338Z,1513270842.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:42.453Z,1513270842.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:42.838Z,1513270842.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:43.243Z,1513270843.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:43.615Z,1513270843.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:44.074Z,1513270844.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:44.427Z,1513270844.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:44.814Z,1513270844.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:45.229Z,1513270845.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:45.632Z,1513270845.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:46.093Z,1513270846.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:46.435Z,1513270846.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:46.806Z,1513270846.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:47.259Z,1513270847.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:47.636Z,1513270847.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:48.047Z,1513270848.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:48.490Z,1513270848.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:48.834Z,1513270848.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:49.239Z,1513270849.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:49.643Z,1513270849.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:50.042Z,1513270850.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:50.448Z,1513270850.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:50.817Z,1513270850.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:51.294Z,1513270851.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:51.630Z,1513270851.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:52.072Z,1513270852.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:52.416Z,1513270852.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:52.846Z,1513270852.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:53.211Z,1513270853.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:53.618Z,1513270853.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:54.077Z,1513270854.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:54.478Z,1513270854.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:54.826Z,1513270854.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:55.220Z,1513270855.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:55.626Z,1513270855.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:56.087Z,1513270856.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:56.411Z,1513270856.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:56.818Z,1513270856.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:57.217Z,1513270857.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:57.684Z,1513270857.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:58.089Z,1513270858.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:58.419Z,1513270858.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:58.824Z,1513270858.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:59.213Z,1513270859.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:00:59.601Z,1513270859.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:00.107Z,1513270860.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:00.427Z,1513270860.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:00.903Z,1513270860.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:01.200Z,1513270861.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:01.604Z,1513270861.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:02.005Z,1513270862.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:02.403Z,1513270862.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:02.806Z,1513270862.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:03.212Z,1513270863.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:03.614Z,1513270863.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:04.057Z,1513270864.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:04.412Z,1513270864.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:04.833Z,1513270864.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:05.209Z,1513270865.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:05.602Z,1513270865.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:06.069Z,1513270866.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:06.420Z,1513270866.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:06.813Z,1513270866.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:07.237Z,1513270867.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:07.626Z,1513270867.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:08.065Z,1513270868.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:08.434Z,1513270868.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:08.843Z,1513270868.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:09.262Z,1513270869.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:09.610Z,1513270869.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:10.080Z,1513270870.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:10.445Z,1513270870.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:10.799Z,1513270870.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:11.255Z,1513270871.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:11.623Z,1513270871.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:12.046Z,1513270872.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T17:01:12.099Z,1513270872.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:12.426Z,1513270872.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:12.803Z,1513270872.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:13.209Z,1513270873.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:13.611Z,1513270873.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:14.029Z,1513270874.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:14.408Z,1513270874.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:14.807Z,1513270874.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:15.219Z,1513270875.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:15.306Z,1513270875.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:01:15.641Z,1513270875.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:16.022Z,1513270876.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:16.107Z,1513270876.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:01:16.434Z,1513270876.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:16.845Z,1513270876.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:17.237Z,1513270877.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:17.618Z,1513270877.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:18.012Z,1513270878.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:18.445Z,1513270878.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:18.847Z,1513270878.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:19.217Z,1513270879.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:19.646Z,1513270879.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:20.093Z,1513270880.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:20.479Z,1513270880.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:20.826Z,1513270880.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:21.214Z,1513270881.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:21.616Z,1513270881.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:22.055Z,1513270882.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:22.422Z,1513270882.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:22.820Z,1513270882.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:23.222Z,1513270883.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:23.607Z,1513270883.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:24.057Z,1513270884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:24.444Z,1513270884.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:24.833Z,1513270884.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-12-14T17:01:24.881Z,1513270884.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:25.229Z,1513270885.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:25.638Z,1513270885.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:26.113Z,1513270886.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:26.445Z,1513270886.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:26.852Z,1513270886.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:27.227Z,1513270887.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:27.674Z,1513270887.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:28.115Z,1513270888.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:28.452Z,1513270888.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:28.816Z,1513270888.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:29.243Z,1513270889.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:29.663Z,1513270889.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:30.014Z,1513270890.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:30.460Z,1513270890.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:30.815Z,1513270890.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:31.271Z,1513270891.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:31.669Z,1513270891.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:32.073Z,1513270892.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:32.503Z,1513270892.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:32.899Z,1513270892.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:33.268Z,1513270893.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:33.682Z,1513270893.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:34.124Z,1513270894.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:34.519Z,1513270894.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:34.834Z,1513270894.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:35.236Z,1513270895.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:35.679Z,1513270895.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:36.160Z,1513270896.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:36.430Z,1513270896.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:36.832Z,1513270896.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:37.249Z,1513270897.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:37.649Z,1513270897.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:38.104Z,1513270898.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:38.441Z,1513270898.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:38.828Z,1513270898.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:39.247Z,1513270899.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:45.222Z,1513270905.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:45.344Z,1513270905.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:45.730Z,1513270905.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:46.131Z,1513270906.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:46.533Z,1513270906.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:46.962Z,1513270906.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:47.372Z,1513270907.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:47.731Z,1513270907.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:48.171Z,1513270908.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:48.535Z,1513270908.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:48.932Z,1513270908.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:49.376Z,1513270909.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:49.743Z,1513270909.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:50.143Z,1513270910.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:50.547Z,1513270910.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:50.956Z,1513270910.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:51.344Z,1513270911.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:51.779Z,1513270911.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:52.161Z,1513270912.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:52.540Z,1513270912.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:52.987Z,1513270912.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:53.316Z,1513270913.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:53.750Z,1513270913.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:54.123Z,1513270914.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:54.512Z,1513270914.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:54.949Z,1513270914.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:55.330Z,1513270915.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:55.766Z,1513270915.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:56.180Z,1513270916.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:56.529Z,1513270916.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:56.931Z,1513270916.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:57.351Z,1513270917.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:57.711Z,1513270917.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:58.133Z,1513270918.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:58.546Z,1513270918.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:58.914Z,1513270918.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:59.351Z,1513270919.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:01:59.710Z,1513270919.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:00.114Z,1513270920.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:00.114Z,1513270920.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 329
2017-12-14T17:02:00.114Z,1513270920.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:02:00.116Z,1513270920.116 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:00.116Z,1513270920.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 329
2017-12-14T17:02:00.116Z,1513270920.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:02:00.118Z,1513270920.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:00.118Z,1513270920.118 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 329
2017-12-14T17:02:00.118Z,1513270920.118 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:02:00.147Z,1513270920.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:02:00.148Z,1513270920.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:02:00.148Z,1513270920.148 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:02:00.550Z,1513270920.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:02:00.550Z,1513270920.550 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 329
2017-12-14T17:02:00.550Z,1513270920.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:02:00.551Z,1513270920.551 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 329
2017-12-14T17:02:00.551Z,1513270920.551 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:02:00.551Z,1513270920.551 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 329
2017-12-14T17:02:00.917Z,1513270920.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:02:00.918Z,1513270920.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:02:00.918Z,1513270920.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:02:00.918Z,1513270920.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:02:00.919Z,1513270920.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:02:00.919Z,1513270920.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:02:00.919Z,1513270920.919 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:02:00.920Z,1513270920.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:02:00.920Z,1513270920.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:02:01.330Z,1513270921.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:01.725Z,1513270921.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:02.108Z,1513270922.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:02.512Z,1513270922.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:02.908Z,1513270922.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:03.312Z,1513270923.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:03.760Z,1513270923.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:04.109Z,1513270924.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:04.524Z,1513270924.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:04.915Z,1513270924.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:05.318Z,1513270925.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:05.714Z,1513270925.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:06.127Z,1513270926.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:06.523Z,1513270926.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:06.913Z,1513270926.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:07.410Z,1513270927.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:07.714Z,1513270927.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:08.114Z,1513270928.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:08.520Z,1513270928.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:08.914Z,1513270928.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:09.318Z,1513270929.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:09.717Z,1513270929.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:10.134Z,1513270930.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:10.565Z,1513270930.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:10.930Z,1513270930.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:11.320Z,1513270931.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:11.720Z,1513270931.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:12.117Z,1513270932.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:12.527Z,1513270932.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:12.917Z,1513270932.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:13.318Z,1513270933.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:13.771Z,1513270933.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:14.124Z,1513270934.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:14.516Z,1513270934.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:14.919Z,1513270934.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:15.323Z,1513270935.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:15.722Z,1513270935.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:16.123Z,1513270936.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:16.531Z,1513270936.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:16.967Z,1513270936.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:17.327Z,1513270937.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:17.763Z,1513270937.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:18.143Z,1513270938.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:18.527Z,1513270938.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:18.926Z,1513270938.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:19.327Z,1513270939.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:19.748Z,1513270939.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:20.120Z,1513270940.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:20.551Z,1513270940.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:20.939Z,1513270940.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:21.347Z,1513270941.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:21.739Z,1513270941.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:22.133Z,1513270942.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:22.516Z,1513270942.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:22.923Z,1513270942.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:23.371Z,1513270943.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:23.723Z,1513270943.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:24.159Z,1513270944.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:24.517Z,1513270944.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:24.927Z,1513270944.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:25.322Z,1513270945.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:25.722Z,1513270945.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:26.123Z,1513270946.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:26.568Z,1513270946.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:26.923Z,1513270946.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:27.319Z,1513270947.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:27.725Z,1513270947.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:28.136Z,1513270948.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:28.527Z,1513270948.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:28.923Z,1513270948.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:29.325Z,1513270949.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:29.811Z,1513270949.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:30.122Z,1513270950.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:30.527Z,1513270950.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:30.921Z,1513270950.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:31.318Z,1513270951.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:31.767Z,1513270951.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:32.124Z,1513270952.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:32.527Z,1513270952.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:32.976Z,1513270952.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:33.331Z,1513270953.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:33.722Z,1513270953.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:34.126Z,1513270954.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:34.521Z,1513270954.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:34.956Z,1513270954.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:35.326Z,1513270955.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:35.724Z,1513270955.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:36.176Z,1513270956.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:36.525Z,1513270956.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:36.538Z,1513270956.538 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:02:36.539Z,1513270956.539 [NAL9602] No Fault, FailCount= 5
2017-12-14T17:02:36.894Z,1513270956.894 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:02:36.990Z,1513270956.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:37.323Z,1513270957.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:37.722Z,1513270957.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:38.139Z,1513270958.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:38.530Z,1513270958.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:38.935Z,1513270958.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:39.377Z,1513270959.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:42.852Z,1513270962.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:42.987Z,1513270962.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:43.384Z,1513270963.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:43.792Z,1513270963.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:44.166Z,1513270964.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:44.594Z,1513270964.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:44.954Z,1513270964.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:45.354Z,1513270965.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:45.787Z,1513270965.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:46.159Z,1513270966.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:46.553Z,1513270966.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:46.955Z,1513270966.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:47.357Z,1513270967.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:47.724Z,1513270967.724 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:02:47.755Z,1513270967.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:48.155Z,1513270968.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:48.557Z,1513270968.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:49.026Z,1513270969.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:49.367Z,1513270969.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:49.754Z,1513270969.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:50.154Z,1513270970.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:50.567Z,1513270970.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:50.963Z,1513270970.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:51.364Z,1513270971.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:51.763Z,1513270971.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:52.205Z,1513270972.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:52.563Z,1513270972.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:52.988Z,1513270972.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:53.360Z,1513270973.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:53.760Z,1513270973.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:54.171Z,1513270974.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:54.572Z,1513270974.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:55.004Z,1513270975.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:55.450Z,1513270975.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:55.757Z,1513270975.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:56.165Z,1513270976.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:56.575Z,1513270976.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:56.967Z,1513270976.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:57.359Z,1513270977.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:57.757Z,1513270977.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:58.167Z,1513270978.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:58.610Z,1513270978.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:58.968Z,1513270978.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:59.360Z,1513270979.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:02:59.767Z,1513270979.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:00.180Z,1513270980.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:00.583Z,1513270980.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:00.968Z,1513270980.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:01.359Z,1513270981.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:01.828Z,1513270981.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:02.176Z,1513270982.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:02.580Z,1513270982.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:02.979Z,1513270982.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:03.355Z,1513270983.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:03.752Z,1513270983.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:04.170Z,1513270984.170 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T17:03:04.170Z,1513270984.170 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:03:04.170Z,1513270984.170 [BPC1](ERROR): Data Fault
2017-12-14T17:03:04.180Z,1513270984.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:04.194Z,1513270984.194 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:03:04.575Z,1513270984.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:04.978Z,1513270984.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:05.353Z,1513270985.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:05.387Z,1513270985.387 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:03:05.387Z,1513270985.387 [BPC1] No Fault, FailCount= 1
2017-12-14T17:03:05.821Z,1513270985.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:06.183Z,1513270986.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:06.564Z,1513270986.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:06.961Z,1513270986.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:07.356Z,1513270987.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:07.756Z,1513270987.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:08.158Z,1513270988.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:08.568Z,1513270988.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:08.961Z,1513270988.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:09.385Z,1513270989.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:09.755Z,1513270989.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:10.185Z,1513270990.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:10.561Z,1513270990.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:11.031Z,1513270991.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:11.357Z,1513270991.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:11.757Z,1513270991.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:12.160Z,1513270992.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:12.599Z,1513270992.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:12.967Z,1513270992.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:13.359Z,1513270993.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:13.758Z,1513270993.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:14.198Z,1513270994.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:14.561Z,1513270994.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:14.961Z,1513270994.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:15.392Z,1513270995.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:15.769Z,1513270995.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:16.159Z,1513270996.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:16.563Z,1513270996.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:16.959Z,1513270996.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:17.361Z,1513270997.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:17.764Z,1513270997.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:18.159Z,1513270998.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:18.562Z,1513270998.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:18.963Z,1513270998.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:19.357Z,1513270999.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:19.763Z,1513270999.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:20.171Z,1513271000.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:20.564Z,1513271000.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:20.968Z,1513271000.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:21.358Z,1513271001.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:21.759Z,1513271001.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:22.164Z,1513271002.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:22.563Z,1513271002.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:23.002Z,1513271003.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:23.367Z,1513271003.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:23.762Z,1513271003.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:24.175Z,1513271004.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:24.567Z,1513271004.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:24.964Z,1513271004.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:25.362Z,1513271005.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:25.758Z,1513271005.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:26.242Z,1513271006.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:26.573Z,1513271006.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:27.010Z,1513271007.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:27.362Z,1513271007.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:27.779Z,1513271007.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:28.171Z,1513271008.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:28.569Z,1513271008.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:28.982Z,1513271008.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:29.357Z,1513271009.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:29.779Z,1513271009.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:30.164Z,1513271010.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:30.577Z,1513271010.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:30.973Z,1513271010.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:31.390Z,1513271011.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:31.762Z,1513271011.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:32.175Z,1513271012.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:32.575Z,1513271012.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:32.975Z,1513271012.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:33.378Z,1513271013.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:33.750Z,1513271013.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:34.180Z,1513271014.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:34.598Z,1513271014.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:34.988Z,1513271014.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:35.352Z,1513271015.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:35.788Z,1513271015.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:36.196Z,1513271016.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:36.584Z,1513271016.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:36.968Z,1513271016.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:37.359Z,1513271017.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:37.802Z,1513271017.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:38.164Z,1513271018.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:38.598Z,1513271018.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:38.969Z,1513271018.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:39.365Z,1513271019.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:42.863Z,1513271022.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:43.004Z,1513271023.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:43.370Z,1513271023.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:43.800Z,1513271023.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:44.219Z,1513271024.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:44.564Z,1513271024.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:44.966Z,1513271024.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:45.379Z,1513271025.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:45.767Z,1513271025.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:46.175Z,1513271026.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:46.576Z,1513271026.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:46.991Z,1513271026.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:47.423Z,1513271027.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:47.779Z,1513271027.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:48.246Z,1513271028.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:48.604Z,1513271028.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:48.980Z,1513271028.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:49.395Z,1513271029.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:49.758Z,1513271029.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:50.228Z,1513271030.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:50.600Z,1513271030.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:50.990Z,1513271030.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:51.363Z,1513271031.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:51.760Z,1513271031.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:52.189Z,1513271032.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:52.590Z,1513271032.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:52.993Z,1513271032.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:53.364Z,1513271033.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:53.788Z,1513271033.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:54.183Z,1513271034.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:54.591Z,1513271034.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:54.981Z,1513271034.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:55.366Z,1513271035.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:55.775Z,1513271035.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:56.179Z,1513271036.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:56.582Z,1513271036.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:57.019Z,1513271037.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:57.371Z,1513271037.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:57.775Z,1513271037.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:58.178Z,1513271038.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:58.627Z,1513271038.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:58.987Z,1513271038.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:59.354Z,1513271039.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:03:59.780Z,1513271039.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:00.231Z,1513271040.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:00.583Z,1513271040.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:00.979Z,1513271040.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:01.360Z,1513271041.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:01.758Z,1513271041.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:02.164Z,1513271042.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:02.594Z,1513271042.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:02.984Z,1513271042.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:03.395Z,1513271043.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:03.762Z,1513271043.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:04.198Z,1513271044.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:04.569Z,1513271044.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:04.976Z,1513271044.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:05.362Z,1513271045.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:05.763Z,1513271045.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:06.171Z,1513271046.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:06.575Z,1513271046.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:06.971Z,1513271046.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:07.366Z,1513271047.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:07.763Z,1513271047.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:08.184Z,1513271048.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:08.579Z,1513271048.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:08.973Z,1513271048.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:09.365Z,1513271049.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:09.852Z,1513271049.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:10.205Z,1513271050.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:10.618Z,1513271050.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:11.007Z,1513271051.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:11.375Z,1513271051.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:11.788Z,1513271051.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:12.176Z,1513271052.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:12.619Z,1513271052.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:12.983Z,1513271052.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:13.391Z,1513271053.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:13.772Z,1513271053.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:14.195Z,1513271054.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:14.585Z,1513271054.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:14.992Z,1513271054.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:15.383Z,1513271055.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:15.764Z,1513271055.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:16.246Z,1513271056.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:16.585Z,1513271056.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:16.986Z,1513271056.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:17.360Z,1513271057.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:17.761Z,1513271057.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:18.184Z,1513271058.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:18.589Z,1513271058.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:18.986Z,1513271058.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:19.403Z,1513271059.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:19.768Z,1513271059.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:20.183Z,1513271060.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:20.587Z,1513271060.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:21.011Z,1513271061.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:21.367Z,1513271061.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:21.770Z,1513271061.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:22.178Z,1513271062.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:22.627Z,1513271062.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:22.983Z,1513271062.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:23.368Z,1513271063.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:23.769Z,1513271063.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:24.187Z,1513271064.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:24.582Z,1513271064.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:24.986Z,1513271064.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:25.376Z,1513271065.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:25.861Z,1513271065.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:26.174Z,1513271066.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:26.585Z,1513271066.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:26.985Z,1513271066.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:27.371Z,1513271067.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:27.771Z,1513271067.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:28.175Z,1513271068.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:28.585Z,1513271068.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:29.023Z,1513271069.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:29.378Z,1513271069.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:29.775Z,1513271069.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:30.183Z,1513271070.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:30.578Z,1513271070.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:30.977Z,1513271070.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:31.374Z,1513271071.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:31.766Z,1513271071.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:32.204Z,1513271072.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:32.583Z,1513271072.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:33.039Z,1513271073.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:33.392Z,1513271073.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:33.760Z,1513271073.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:34.195Z,1513271074.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:34.579Z,1513271074.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:35.024Z,1513271075.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:35.363Z,1513271075.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:35.763Z,1513271075.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:36.187Z,1513271076.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:36.589Z,1513271076.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:36.984Z,1513271076.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:37.358Z,1513271077.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:37.758Z,1513271077.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:38.168Z,1513271078.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:38.619Z,1513271078.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:38.971Z,1513271078.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:39.364Z,1513271079.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:42.890Z,1513271082.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:43.055Z,1513271083.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:43.367Z,1513271083.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:43.765Z,1513271083.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:44.161Z,1513271084.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:44.558Z,1513271084.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:45.004Z,1513271085.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:45.371Z,1513271085.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:45.767Z,1513271085.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:46.164Z,1513271086.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:46.558Z,1513271086.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:47.042Z,1513271087.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:47.362Z,1513271087.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:47.762Z,1513271087.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:48.191Z,1513271088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:48.596Z,1513271088.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:48.963Z,1513271088.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:49.357Z,1513271089.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:49.762Z,1513271089.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:50.164Z,1513271090.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:50.564Z,1513271090.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:50.971Z,1513271090.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:51.374Z,1513271091.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:51.759Z,1513271091.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:52.168Z,1513271092.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:52.568Z,1513271092.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:52.975Z,1513271092.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:53.366Z,1513271093.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:53.767Z,1513271093.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:54.197Z,1513271094.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:54.611Z,1513271094.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:55.031Z,1513271095.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:55.367Z,1513271095.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:55.801Z,1513271095.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:56.175Z,1513271096.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:56.623Z,1513271096.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:56.979Z,1513271096.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:57.361Z,1513271097.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:57.855Z,1513271097.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:58.175Z,1513271098.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:58.571Z,1513271098.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:58.971Z,1513271098.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:59.365Z,1513271099.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:04:59.767Z,1513271099.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:00.173Z,1513271100.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:00.574Z,1513271100.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:01.023Z,1513271101.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:01.023Z,1513271101.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 330
2017-12-14T17:05:01.023Z,1513271101.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:05:01.030Z,1513271101.030 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:01.030Z,1513271101.030 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 330
2017-12-14T17:05:01.030Z,1513271101.030 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:05:01.032Z,1513271101.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:01.032Z,1513271101.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 330
2017-12-14T17:05:01.032Z,1513271101.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:05:01.072Z,1513271101.072 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:05:01.085Z,1513271101.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:05:01.085Z,1513271101.085 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:05:01.393Z,1513271101.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:05:01.393Z,1513271101.393 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 330
2017-12-14T17:05:01.393Z,1513271101.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:05:01.393Z,1513271101.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 330
2017-12-14T17:05:01.394Z,1513271101.394 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:05:01.394Z,1513271101.394 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 330
2017-12-14T17:05:01.774Z,1513271101.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:05:01.775Z,1513271101.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:05:01.775Z,1513271101.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:05:01.775Z,1513271101.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:05:01.776Z,1513271101.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:05:01.776Z,1513271101.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:05:01.776Z,1513271101.776 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:05:01.777Z,1513271101.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:05:01.777Z,1513271101.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:05:02.176Z,1513271102.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:02.591Z,1513271102.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:02.980Z,1513271102.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:03.374Z,1513271103.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:03.754Z,1513271103.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:04.205Z,1513271104.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:04.584Z,1513271104.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:05.031Z,1513271105.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:05.352Z,1513271105.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:05.756Z,1513271105.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:06.191Z,1513271106.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:06.587Z,1513271106.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:06.984Z,1513271106.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:07.391Z,1513271107.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:07.759Z,1513271107.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:08.160Z,1513271108.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:08.585Z,1513271108.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:08.988Z,1513271108.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:09.363Z,1513271109.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:09.757Z,1513271109.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:10.160Z,1513271110.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:10.587Z,1513271110.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:10.972Z,1513271110.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:11.364Z,1513271111.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:11.764Z,1513271111.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:12.167Z,1513271112.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:12.576Z,1513271112.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:12.971Z,1513271112.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:13.364Z,1513271113.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:13.767Z,1513271113.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:14.183Z,1513271114.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:14.591Z,1513271114.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:14.995Z,1513271114.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:15.356Z,1513271115.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:15.754Z,1513271115.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:16.185Z,1513271116.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:16.580Z,1513271116.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:17.083Z,1513271117.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:17.358Z,1513271117.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:17.756Z,1513271117.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:18.196Z,1513271118.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:18.595Z,1513271118.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:18.992Z,1513271118.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:19.399Z,1513271119.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:19.767Z,1513271119.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:20.190Z,1513271120.190 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:05:20.191Z,1513271120.191 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:05:20.191Z,1513271120.191 [BPC1](ERROR): Communications Fault
2017-12-14T17:05:20.207Z,1513271120.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:20.297Z,1513271120.297 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:05:20.595Z,1513271120.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:20.990Z,1513271120.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:21.359Z,1513271121.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:21.396Z,1513271121.396 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:05:21.397Z,1513271121.397 [BPC1] No Fault, FailCount= 1
2017-12-14T17:05:21.819Z,1513271121.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:22.183Z,1513271122.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:22.579Z,1513271122.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:22.983Z,1513271122.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:23.356Z,1513271123.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:23.756Z,1513271123.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:24.182Z,1513271124.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:24.580Z,1513271124.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:24.960Z,1513271124.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:25.360Z,1513271125.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:25.759Z,1513271125.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:26.161Z,1513271126.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:26.565Z,1513271126.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:26.967Z,1513271126.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:27.367Z,1513271127.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:27.760Z,1513271127.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:28.161Z,1513271128.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:28.591Z,1513271128.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:28.960Z,1513271128.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:29.360Z,1513271129.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:29.884Z,1513271129.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:30.172Z,1513271130.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:30.599Z,1513271130.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:30.962Z,1513271130.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:31.360Z,1513271131.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:31.759Z,1513271131.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:32.161Z,1513271132.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:32.572Z,1513271132.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:33.043Z,1513271133.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:33.360Z,1513271133.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:33.794Z,1513271133.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:34.169Z,1513271134.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:34.572Z,1513271134.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:34.979Z,1513271134.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:35.360Z,1513271135.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:35.764Z,1513271135.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:36.203Z,1513271136.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:36.579Z,1513271136.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:36.969Z,1513271136.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:37.362Z,1513271137.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:37.763Z,1513271137.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:38.170Z,1513271138.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:38.571Z,1513271138.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:38.974Z,1513271138.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:38.977Z,1513271138.977 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:05:38.978Z,1513271138.978 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:05:38.978Z,1513271138.978 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:05:38.978Z,1513271138.978 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:05:39.395Z,1513271139.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:39.407Z,1513271139.407 [Default:CheckIn:D] Stopped
2017-12-14T17:05:39.407Z,1513271139.407 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:05:39.762Z,1513271139.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 992.400260 min 
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn:E] Stopped
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn] Stopped
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn](INFO): Running loop #96
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn] Running Loop=96
2017-12-14T17:05:39.766Z,1513271139.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:05:39.767Z,1513271139.767 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:05:43.305Z,1513271143.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:43.454Z,1513271143.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:43.807Z,1513271143.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:44.191Z,1513271144.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:44.618Z,1513271144.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:44.988Z,1513271144.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:45.421Z,1513271145.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:45.824Z,1513271145.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:46.193Z,1513271146.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:46.583Z,1513271146.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:46.991Z,1513271146.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:47.386Z,1513271147.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:47.783Z,1513271147.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:48.189Z,1513271148.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:48.591Z,1513271148.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:49.047Z,1513271149.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:49.380Z,1513271149.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:49.787Z,1513271149.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:50.179Z,1513271150.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:50.580Z,1513271150.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:50.986Z,1513271150.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:51.392Z,1513271151.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:51.799Z,1513271151.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:52.268Z,1513271152.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:52.584Z,1513271152.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:53.015Z,1513271153.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:53.381Z,1513271153.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:53.783Z,1513271153.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:54.190Z,1513271154.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:54.603Z,1513271154.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:54.993Z,1513271154.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:55.422Z,1513271155.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:55.787Z,1513271155.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:56.193Z,1513271156.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:56.593Z,1513271156.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:56.989Z,1513271156.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:57.383Z,1513271157.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:57.779Z,1513271157.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:58.188Z,1513271158.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:58.636Z,1513271158.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:58.995Z,1513271158.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:59.389Z,1513271159.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:05:59.796Z,1513271159.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:00.194Z,1513271160.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:00.602Z,1513271160.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:01.003Z,1513271161.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:01.390Z,1513271161.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:01.831Z,1513271161.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:02.206Z,1513271162.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:02.600Z,1513271162.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:03.008Z,1513271163.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:03.375Z,1513271163.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:03.777Z,1513271163.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:04.219Z,1513271164.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:04.607Z,1513271164.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:05.083Z,1513271165.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:05.379Z,1513271165.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:05.812Z,1513271165.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:06.214Z,1513271166.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:06.622Z,1513271166.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:06.984Z,1513271166.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:07.382Z,1513271167.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:07.787Z,1513271167.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:08.311Z,1513271168.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:08.588Z,1513271168.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:09.019Z,1513271169.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:09.379Z,1513271169.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:09.787Z,1513271169.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:10.195Z,1513271170.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:10.595Z,1513271170.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:10.987Z,1513271170.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:11.379Z,1513271171.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:11.783Z,1513271171.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:12.195Z,1513271172.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:12.618Z,1513271172.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:12.988Z,1513271172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:13.383Z,1513271173.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:13.845Z,1513271173.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:14.195Z,1513271174.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:14.587Z,1513271174.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:15.027Z,1513271175.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:15.381Z,1513271175.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:15.782Z,1513271175.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:16.203Z,1513271176.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:16.603Z,1513271176.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:16.996Z,1513271176.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:17.385Z,1513271177.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:17.780Z,1513271177.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:18.188Z,1513271178.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:18.591Z,1513271178.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:19.039Z,1513271179.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:19.392Z,1513271179.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:19.810Z,1513271179.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:20.220Z,1513271180.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:20.621Z,1513271180.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:21.031Z,1513271181.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:21.423Z,1513271181.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:21.813Z,1513271181.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:22.215Z,1513271182.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:22.658Z,1513271182.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:23.016Z,1513271183.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:23.410Z,1513271183.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:23.822Z,1513271183.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:24.358Z,1513271184.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:24.635Z,1513271184.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:25.059Z,1513271185.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:25.400Z,1513271185.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:25.855Z,1513271185.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:26.187Z,1513271186.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:26.601Z,1513271186.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:27.051Z,1513271187.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:27.404Z,1513271187.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:27.869Z,1513271187.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:28.213Z,1513271188.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:28.611Z,1513271188.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:29.005Z,1513271189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:29.400Z,1513271189.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:29.809Z,1513271189.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:30.204Z,1513271190.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:30.615Z,1513271190.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:31.024Z,1513271191.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:31.454Z,1513271191.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:31.811Z,1513271191.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:32.213Z,1513271192.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:32.617Z,1513271192.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:33.011Z,1513271193.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:33.423Z,1513271193.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:33.818Z,1513271193.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:34.238Z,1513271194.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:34.635Z,1513271194.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:35.022Z,1513271195.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:35.426Z,1513271195.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:35.810Z,1513271195.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:36.207Z,1513271196.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:36.663Z,1513271196.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:37.033Z,1513271197.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:37.397Z,1513271197.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:37.800Z,1513271197.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:38.207Z,1513271198.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:38.607Z,1513271198.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:39.010Z,1513271199.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:39.414Z,1513271199.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:39.801Z,1513271199.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:46.751Z,1513271206.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:46.947Z,1513271206.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:47.293Z,1513271207.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:47.660Z,1513271207.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:48.129Z,1513271208.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:48.551Z,1513271208.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:48.907Z,1513271208.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:49.311Z,1513271209.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:49.703Z,1513271209.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:50.166Z,1513271210.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:50.499Z,1513271210.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:50.860Z,1513271210.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:51.304Z,1513271211.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:51.701Z,1513271211.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:52.104Z,1513271212.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:52.475Z,1513271212.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:52.868Z,1513271212.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:53.275Z,1513271213.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:53.703Z,1513271213.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:54.056Z,1513271214.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:54.462Z,1513271214.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:54.860Z,1513271214.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:55.271Z,1513271215.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:55.675Z,1513271215.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:56.080Z,1513271216.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:56.464Z,1513271216.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:56.856Z,1513271216.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:57.263Z,1513271217.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:57.660Z,1513271217.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:58.241Z,1513271218.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:58.468Z,1513271218.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:58.868Z,1513271218.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:59.275Z,1513271219.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:06:59.667Z,1513271219.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:00.102Z,1513271220.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:00.505Z,1513271220.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:00.861Z,1513271220.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:01.267Z,1513271221.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:01.676Z,1513271221.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:02.083Z,1513271222.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:02.465Z,1513271222.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:02.873Z,1513271222.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:03.260Z,1513271223.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:03.672Z,1513271223.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:04.104Z,1513271224.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:04.476Z,1513271224.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:04.876Z,1513271224.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:05.272Z,1513271225.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:05.679Z,1513271225.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:06.074Z,1513271226.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:06.477Z,1513271226.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:06.856Z,1513271226.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:07.287Z,1513271227.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:07.679Z,1513271227.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:08.086Z,1513271228.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:08.463Z,1513271228.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:08.864Z,1513271228.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:09.298Z,1513271229.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:09.662Z,1513271229.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:10.164Z,1513271230.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:10.471Z,1513271230.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:10.906Z,1513271230.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:11.316Z,1513271231.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:11.654Z,1513271231.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:12.093Z,1513271232.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:12.480Z,1513271232.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:12.858Z,1513271232.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:13.288Z,1513271233.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:13.686Z,1513271233.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:14.099Z,1513271234.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:14.463Z,1513271234.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:14.863Z,1513271234.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:15.265Z,1513271235.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:15.661Z,1513271235.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:16.106Z,1513271236.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:16.497Z,1513271236.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:16.871Z,1513271236.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:17.264Z,1513271237.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:17.657Z,1513271237.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:18.143Z,1513271238.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:18.467Z,1513271238.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:18.864Z,1513271238.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:19.272Z,1513271239.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:19.684Z,1513271239.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:20.071Z,1513271240.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:20.506Z,1513271240.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:20.861Z,1513271240.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:21.263Z,1513271241.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:21.671Z,1513271241.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:22.067Z,1513271242.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:22.474Z,1513271242.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:22.931Z,1513271242.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:23.283Z,1513271243.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:23.672Z,1513271243.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:24.085Z,1513271244.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:24.476Z,1513271244.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:24.872Z,1513271244.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:25.268Z,1513271245.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:25.672Z,1513271245.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:26.129Z,1513271246.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:26.479Z,1513271246.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:26.863Z,1513271246.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:27.260Z,1513271247.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:27.658Z,1513271247.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:28.096Z,1513271248.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:28.479Z,1513271248.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:28.879Z,1513271248.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:29.304Z,1513271249.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:29.665Z,1513271249.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:30.084Z,1513271250.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:30.465Z,1513271250.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:30.871Z,1513271250.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:31.295Z,1513271251.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:31.676Z,1513271251.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:32.127Z,1513271252.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:32.524Z,1513271252.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:32.872Z,1513271252.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:33.292Z,1513271253.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:33.661Z,1513271253.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:34.091Z,1513271254.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:34.474Z,1513271254.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:34.864Z,1513271254.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:35.264Z,1513271255.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:35.704Z,1513271255.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:36.063Z,1513271256.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:36.466Z,1513271256.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:36.859Z,1513271256.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:37.268Z,1513271257.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:37.667Z,1513271257.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:38.091Z,1513271258.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:38.467Z,1513271258.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:38.905Z,1513271258.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:39.255Z,1513271259.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:39.652Z,1513271259.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:40.053Z,1513271260.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:43.500Z,1513271263.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:43.558Z,1513271263.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:43.636Z,1513271263.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:44.076Z,1513271264.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:44.353Z,1513271264.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:44.411Z,1513271264.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:44.762Z,1513271264.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:44.810Z,1513271264.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:45.212Z,1513271265.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:45.558Z,1513271265.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:45.611Z,1513271265.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:45.988Z,1513271265.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:46.354Z,1513271266.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:46.429Z,1513271266.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:46.757Z,1513271266.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:46.826Z,1513271266.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:47.235Z,1513271267.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:47.608Z,1513271267.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:47.999Z,1513271267.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:48.527Z,1513271268.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:48.821Z,1513271268.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:48.866Z,1513271268.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:49.207Z,1513271269.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:49.620Z,1513271269.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:49.662Z,1513271269.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:50.012Z,1513271270.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:50.442Z,1513271270.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:50.796Z,1513271270.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:51.219Z,1513271271.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:51.621Z,1513271271.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:51.658Z,1513271271.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:52.082Z,1513271272.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:52.422Z,1513271272.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:52.453Z,1513271272.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:52.814Z,1513271272.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:52.857Z,1513271272.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:53.210Z,1513271273.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:53.587Z,1513271273.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:53.654Z,1513271273.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:54.073Z,1513271274.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:54.423Z,1513271274.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:54.450Z,1513271274.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:54.838Z,1513271274.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:54.853Z,1513271274.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:55.267Z,1513271275.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:55.591Z,1513271275.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:55.650Z,1513271275.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:56.076Z,1513271276.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:56.446Z,1513271276.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:56.448Z,1513271276.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:56.811Z,1513271276.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:56.849Z,1513271276.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:57.243Z,1513271277.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:57.627Z,1513271277.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:57.666Z,1513271277.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:58.092Z,1513271278.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:58.423Z,1513271278.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:58.461Z,1513271278.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:58.805Z,1513271278.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:58.865Z,1513271278.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:07:59.209Z,1513271279.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:59.615Z,1513271279.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:07:59.661Z,1513271279.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:00.042Z,1513271280.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:00.419Z,1513271280.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:00.457Z,1513271280.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:00.820Z,1513271280.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:00.861Z,1513271280.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:01.222Z,1513271281.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:01.632Z,1513271281.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:01.995Z,1513271281.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:01.996Z,1513271281.996 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 331
2017-12-14T17:08:01.996Z,1513271281.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:08:01.997Z,1513271281.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:01.998Z,1513271281.998 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 331
2017-12-14T17:08:01.998Z,1513271281.998 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:08:01.999Z,1513271281.999 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:01.000Z,1513271282.000 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 331
2017-12-14T17:08:01.000Z,1513271282.000 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:08:02.039Z,1513271282.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:08:02.039Z,1513271282.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:08:02.039Z,1513271282.039 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:08:02.455Z,1513271282.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:08:02.455Z,1513271282.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 331
2017-12-14T17:08:02.456Z,1513271282.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:08:02.456Z,1513271282.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 331
2017-12-14T17:08:02.456Z,1513271282.456 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:08:02.456Z,1513271282.456 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 331
2017-12-14T17:08:02.802Z,1513271282.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:08:02.803Z,1513271282.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:08:02.803Z,1513271282.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:08:02.803Z,1513271282.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:08:02.804Z,1513271282.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:08:02.804Z,1513271282.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:08:02.804Z,1513271282.804 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:08:02.809Z,1513271282.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:08:02.809Z,1513271282.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:08:03.209Z,1513271283.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:03.603Z,1513271283.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:03.673Z,1513271283.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:04.012Z,1513271284.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:04.476Z,1513271284.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:04.495Z,1513271284.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:04.815Z,1513271284.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:04.881Z,1513271284.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:05.207Z,1513271285.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:05.652Z,1513271285.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:05.694Z,1513271285.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:06.064Z,1513271286.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:06.407Z,1513271286.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:06.473Z,1513271286.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:06.802Z,1513271286.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:07.213Z,1513271287.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:07.270Z,1513271287.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:07.638Z,1513271287.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:08.065Z,1513271288.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:08.088Z,1513271288.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:08.422Z,1513271288.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:08.473Z,1513271288.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:08.816Z,1513271288.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:09.211Z,1513271289.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:09.269Z,1513271289.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:09.603Z,1513271289.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:10.059Z,1513271290.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:10.066Z,1513271290.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:10.426Z,1513271290.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:10.481Z,1513271290.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:10.844Z,1513271290.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:11.232Z,1513271291.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:11.278Z,1513271291.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:11.626Z,1513271291.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:12.073Z,1513271292.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:12.080Z,1513271292.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:12.427Z,1513271292.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:12.477Z,1513271292.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:12.838Z,1513271292.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:13.202Z,1513271293.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:13.596Z,1513271293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:14.134Z,1513271294.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:14.438Z,1513271294.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:14.820Z,1513271294.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:15.212Z,1513271295.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:15.602Z,1513271295.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:16.003Z,1513271296.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:16.450Z,1513271296.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:16.815Z,1513271296.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:17.212Z,1513271297.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:17.716Z,1513271297.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:18.006Z,1513271298.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:18.464Z,1513271298.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:18.808Z,1513271298.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:19.256Z,1513271299.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:19.590Z,1513271299.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:19.622Z,1513271299.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:20.090Z,1513271300.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:20.386Z,1513271300.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:20.443Z,1513271300.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:20.789Z,1513271300.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:20.815Z,1513271300.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:21.195Z,1513271301.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:21.586Z,1513271301.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:21.597Z,1513271301.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:22.069Z,1513271302.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:22.382Z,1513271302.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:22.434Z,1513271302.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:22.785Z,1513271302.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:22.815Z,1513271302.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:23.222Z,1513271303.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:23.582Z,1513271303.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:23.666Z,1513271303.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:24.089Z,1513271304.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:24.377Z,1513271304.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:24.432Z,1513271304.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:24.781Z,1513271304.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:24.810Z,1513271304.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:25.212Z,1513271305.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:25.584Z,1513271305.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:25.637Z,1513271305.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:26.078Z,1513271306.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:26.377Z,1513271306.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:26.414Z,1513271306.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:26.781Z,1513271306.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:26.858Z,1513271306.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:27.222Z,1513271307.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:27.578Z,1513271307.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:27.636Z,1513271307.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:27.992Z,1513271307.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:28.373Z,1513271308.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:28.438Z,1513271308.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:28.777Z,1513271308.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:28.835Z,1513271308.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:29.201Z,1513271309.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:29.574Z,1513271309.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:29.596Z,1513271309.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:30.032Z,1513271310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:30.369Z,1513271310.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:30.447Z,1513271310.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:30.798Z,1513271310.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:30.811Z,1513271310.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:31.215Z,1513271311.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:31.606Z,1513271311.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:31.615Z,1513271311.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:32.011Z,1513271312.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:32.402Z,1513271312.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:32.444Z,1513271312.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:32.807Z,1513271312.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:32.823Z,1513271312.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:33.261Z,1513271313.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:33.602Z,1513271313.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:33.612Z,1513271313.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:34.075Z,1513271314.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:34.397Z,1513271314.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:34.413Z,1513271314.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:34.809Z,1513271314.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:34.816Z,1513271314.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:35.206Z,1513271315.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:35.606Z,1513271315.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:35.618Z,1513271315.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:36.056Z,1513271316.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:36.402Z,1513271316.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:36.484Z,1513271316.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:36.805Z,1513271316.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:36.833Z,1513271316.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:37.222Z,1513271317.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:37.591Z,1513271317.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:37.604Z,1513271317.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:38.076Z,1513271318.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:38.398Z,1513271318.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:38.409Z,1513271318.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:38.799Z,1513271318.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:38.815Z,1513271318.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:39.217Z,1513271319.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:39.611Z,1513271319.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:39.692Z,1513271319.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:40.107Z,1513271320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:40.405Z,1513271320.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:40.442Z,1513271320.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:40.810Z,1513271320.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:41.605Z,1513271321.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:42.403Z,1513271322.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:42.813Z,1513271322.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:43.611Z,1513271323.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:43.838Z,1513271323.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:43.989Z,1513271323.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:44.406Z,1513271324.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:44.419Z,1513271324.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:44.720Z,1513271324.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:44.810Z,1513271324.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:45.108Z,1513271325.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:45.509Z,1513271325.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:45.607Z,1513271325.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:45.910Z,1513271325.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:46.402Z,1513271326.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:46.413Z,1513271326.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:46.724Z,1513271326.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:46.814Z,1513271326.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:47.125Z,1513271327.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:47.515Z,1513271327.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:47.610Z,1513271327.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:47.920Z,1513271327.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:48.307Z,1513271328.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:48.405Z,1513271328.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:48.737Z,1513271328.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:48.810Z,1513271328.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:49.143Z,1513271329.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:49.520Z,1513271329.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:49.606Z,1513271329.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:49.928Z,1513271329.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:50.331Z,1513271330.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:50.403Z,1513271330.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:50.723Z,1513271330.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:50.814Z,1513271330.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:51.132Z,1513271331.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:51.509Z,1513271331.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:51.611Z,1513271331.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:51.909Z,1513271331.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:52.371Z,1513271332.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:52.405Z,1513271332.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:52.759Z,1513271332.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:52.809Z,1513271332.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:53.122Z,1513271333.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:53.520Z,1513271333.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:53.607Z,1513271333.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:53.915Z,1513271333.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:54.323Z,1513271334.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:54.401Z,1513271334.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:54.726Z,1513271334.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:54.805Z,1513271334.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:55.155Z,1513271335.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:55.550Z,1513271335.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:55.602Z,1513271335.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:55.940Z,1513271335.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:56.339Z,1513271336.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:56.397Z,1513271336.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:56.715Z,1513271336.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:56.803Z,1513271336.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:57.111Z,1513271337.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:57.511Z,1513271337.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:57.597Z,1513271337.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:57.912Z,1513271337.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:58.394Z,1513271338.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:58.417Z,1513271338.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:58.749Z,1513271338.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:58.799Z,1513271338.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:59.118Z,1513271339.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:59.511Z,1513271339.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:08:59.594Z,1513271339.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:08:59.914Z,1513271339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:00.398Z,1513271340.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:00.415Z,1513271340.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:00.715Z,1513271340.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:00.809Z,1513271340.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:01.111Z,1513271341.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:01.534Z,1513271341.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:01.608Z,1513271341.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:01.948Z,1513271341.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:02.316Z,1513271342.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:02.401Z,1513271342.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:02.725Z,1513271342.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:02.805Z,1513271342.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:03.115Z,1513271343.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:03.520Z,1513271343.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:03.602Z,1513271343.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:03.915Z,1513271343.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:04.324Z,1513271344.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:04.399Z,1513271344.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:04.790Z,1513271344.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:04.803Z,1513271344.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:05.130Z,1513271345.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:05.511Z,1513271345.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:05.598Z,1513271345.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:05.943Z,1513271345.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:06.310Z,1513271346.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:06.393Z,1513271346.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:06.785Z,1513271346.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:06.798Z,1513271346.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:07.111Z,1513271347.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:07.540Z,1513271347.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:07.594Z,1513271347.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:07.917Z,1513271347.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:08.391Z,1513271348.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:08.403Z,1513271348.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:08.711Z,1513271348.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:08.801Z,1513271348.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:09.118Z,1513271349.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:09.517Z,1513271349.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:09.598Z,1513271349.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:09.915Z,1513271349.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:10.321Z,1513271350.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:10.393Z,1513271350.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:10.727Z,1513271350.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:10.797Z,1513271350.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:11.125Z,1513271351.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:11.555Z,1513271351.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:11.596Z,1513271351.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:11.923Z,1513271351.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:12.380Z,1513271352.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:12.390Z,1513271352.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:12.710Z,1513271352.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:12.806Z,1513271352.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:13.107Z,1513271353.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:13.516Z,1513271353.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:13.602Z,1513271353.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:13.939Z,1513271353.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:14.380Z,1513271354.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:14.398Z,1513271354.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:14.771Z,1513271354.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:14.837Z,1513271354.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:15.115Z,1513271355.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:15.513Z,1513271355.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:15.633Z,1513271355.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:15.917Z,1513271355.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:16.330Z,1513271356.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:16.430Z,1513271356.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:16.738Z,1513271356.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:16.833Z,1513271356.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:17.129Z,1513271357.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:17.523Z,1513271357.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:17.630Z,1513271357.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:18.026Z,1513271358.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:18.314Z,1513271358.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:18.429Z,1513271358.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:18.720Z,1513271358.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:18.833Z,1513271358.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:19.112Z,1513271359.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:19.516Z,1513271359.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:19.630Z,1513271359.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:19.916Z,1513271359.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:20.327Z,1513271360.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:20.426Z,1513271360.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:20.713Z,1513271360.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:20.829Z,1513271360.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:21.115Z,1513271361.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:21.522Z,1513271361.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:21.627Z,1513271361.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:21.921Z,1513271361.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:22.339Z,1513271362.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:22.421Z,1513271362.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:22.743Z,1513271362.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:22.826Z,1513271362.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:23.137Z,1513271363.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:23.535Z,1513271363.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:23.624Z,1513271363.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:23.915Z,1513271363.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:24.347Z,1513271364.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:24.426Z,1513271364.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:24.713Z,1513271364.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:24.830Z,1513271364.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:25.116Z,1513271365.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:25.520Z,1513271365.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:25.626Z,1513271365.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:25.923Z,1513271365.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:26.412Z,1513271366.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:26.423Z,1513271366.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:26.755Z,1513271366.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:26.830Z,1513271366.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:27.111Z,1513271367.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:27.585Z,1513271367.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:27.646Z,1513271367.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:27.910Z,1513271367.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:28.442Z,1513271368.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:28.446Z,1513271368.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:28.466Z,1513271368.466 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:09:28.716Z,1513271368.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:28.845Z,1513271368.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:29.116Z,1513271369.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:29.514Z,1513271369.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:29.642Z,1513271369.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:29.911Z,1513271369.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:30.310Z,1513271370.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:30.437Z,1513271370.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:30.746Z,1513271370.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:30.842Z,1513271370.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:31.115Z,1513271371.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:31.539Z,1513271371.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:31.638Z,1513271371.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:31.916Z,1513271371.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:32.322Z,1513271372.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:32.434Z,1513271372.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:32.723Z,1513271372.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:32.837Z,1513271372.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:33.115Z,1513271373.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:33.518Z,1513271373.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:33.634Z,1513271373.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:34.023Z,1513271374.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:34.327Z,1513271374.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:34.429Z,1513271374.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:34.735Z,1513271374.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:34.834Z,1513271374.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:35.132Z,1513271375.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:35.522Z,1513271375.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:35.630Z,1513271375.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:35.922Z,1513271375.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:36.310Z,1513271376.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:36.425Z,1513271376.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:36.744Z,1513271376.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:36.829Z,1513271376.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:37.115Z,1513271377.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:37.514Z,1513271377.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:37.627Z,1513271377.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:37.933Z,1513271377.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:38.313Z,1513271378.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:38.421Z,1513271378.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:38.711Z,1513271378.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:38.825Z,1513271378.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:39.119Z,1513271379.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:39.516Z,1513271379.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:39.622Z,1513271379.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:39.912Z,1513271379.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:40.411Z,1513271380.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:40.417Z,1513271380.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:40.758Z,1513271380.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:40.845Z,1513271380.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:41.642Z,1513271381.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:42.440Z,1513271382.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:42.845Z,1513271382.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:43.642Z,1513271383.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:44.235Z,1513271384.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:44.379Z,1513271384.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:44.437Z,1513271384.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:44.736Z,1513271384.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:44.841Z,1513271384.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:45.135Z,1513271385.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:45.546Z,1513271385.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:45.638Z,1513271385.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:45.938Z,1513271385.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:46.352Z,1513271386.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:46.434Z,1513271386.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:46.760Z,1513271386.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:46.838Z,1513271386.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:47.151Z,1513271387.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:47.547Z,1513271387.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:47.634Z,1513271387.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:47.985Z,1513271387.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:48.331Z,1513271388.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:48.429Z,1513271388.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:48.733Z,1513271388.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:48.833Z,1513271388.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:49.164Z,1513271389.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:49.541Z,1513271389.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:49.630Z,1513271389.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:50.038Z,1513271390.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:50.387Z,1513271390.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:50.426Z,1513271390.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:50.736Z,1513271390.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:50.833Z,1513271390.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:51.167Z,1513271391.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:51.539Z,1513271391.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:51.630Z,1513271391.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:51.943Z,1513271391.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:52.343Z,1513271392.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:52.425Z,1513271392.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:52.764Z,1513271392.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:52.829Z,1513271392.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:53.151Z,1513271393.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:53.532Z,1513271393.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:53.628Z,1513271393.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:53.939Z,1513271393.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:54.391Z,1513271394.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:54.421Z,1513271394.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:54.734Z,1513271394.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:54.833Z,1513271394.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:55.154Z,1513271395.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:55.553Z,1513271395.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:55.631Z,1513271395.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:55.949Z,1513271395.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:56.425Z,1513271396.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:56.467Z,1513271396.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:56.767Z,1513271396.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:56.853Z,1513271396.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:57.150Z,1513271397.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:57.561Z,1513271397.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:57.650Z,1513271397.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:58.054Z,1513271398.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:58.344Z,1513271398.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:58.433Z,1513271398.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:58.748Z,1513271398.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:59.148Z,1513271399.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:59.231Z,1513271399.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:09:59.600Z,1513271399.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:09:59.986Z,1513271399.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:00.027Z,1513271400.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:00.343Z,1513271400.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:00.469Z,1513271400.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:00.743Z,1513271400.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:01.138Z,1513271401.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:01.266Z,1513271401.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:01.543Z,1513271401.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:02.027Z,1513271402.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:02.061Z,1513271402.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:02.348Z,1513271402.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:02.794Z,1513271402.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:02.858Z,1513271402.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:03.143Z,1513271403.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:03.293Z,1513271403.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:03.539Z,1513271403.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:03.935Z,1513271403.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:04.089Z,1513271404.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:04.344Z,1513271404.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:04.493Z,1513271404.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:04.741Z,1513271404.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:05.139Z,1513271405.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:05.289Z,1513271405.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:05.550Z,1513271405.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:05.988Z,1513271405.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:06.086Z,1513271406.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:06.348Z,1513271406.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:06.521Z,1513271406.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:06.737Z,1513271406.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:07.150Z,1513271407.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:07.317Z,1513271407.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:07.526Z,1513271407.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:07.955Z,1513271407.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:08.113Z,1513271408.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:08.426Z,1513271408.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:08.751Z,1513271408.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:08.838Z,1513271408.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:09.151Z,1513271409.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:09.548Z,1513271409.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:09.635Z,1513271409.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:09.971Z,1513271409.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:10.425Z,1513271410.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:10.430Z,1513271410.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:10.747Z,1513271410.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:10.833Z,1513271410.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:11.183Z,1513271411.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:11.555Z,1513271411.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:11.631Z,1513271411.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:11.942Z,1513271411.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:12.419Z,1513271412.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:12.426Z,1513271412.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:12.740Z,1513271412.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:12.829Z,1513271412.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:13.170Z,1513271413.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:13.540Z,1513271413.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:13.625Z,1513271413.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:14.012Z,1513271414.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:14.329Z,1513271414.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:14.423Z,1513271414.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:14.759Z,1513271414.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:14.829Z,1513271414.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:15.127Z,1513271415.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:15.607Z,1513271415.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:15.626Z,1513271415.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:16.014Z,1513271416.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:16.337Z,1513271416.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:16.421Z,1513271416.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:16.736Z,1513271416.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:16.825Z,1513271416.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:10:17.136Z,1513271417.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:17.536Z,1513271417.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:17.938Z,1513271417.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:18.351Z,1513271418.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:18.804Z,1513271418.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:19.148Z,1513271419.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:19.546Z,1513271419.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:19.938Z,1513271419.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:20.348Z,1513271420.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:20.747Z,1513271420.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:21.133Z,1513271421.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:21.572Z,1513271421.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:22.015Z,1513271422.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:22.404Z,1513271422.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:22.742Z,1513271422.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:23.148Z,1513271423.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:23.543Z,1513271423.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:23.950Z,1513271423.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:24.399Z,1513271424.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:24.750Z,1513271424.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:25.182Z,1513271425.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:25.524Z,1513271425.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:25.929Z,1513271425.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:26.342Z,1513271426.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:26.739Z,1513271426.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:27.134Z,1513271427.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:27.543Z,1513271427.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:27.943Z,1513271427.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:28.385Z,1513271428.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:28.746Z,1513271428.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:29.151Z,1513271429.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:29.542Z,1513271429.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:30.019Z,1513271430.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:30.351Z,1513271430.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:30.755Z,1513271430.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:31.152Z,1513271431.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:31.600Z,1513271431.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:31.936Z,1513271431.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:32.334Z,1513271432.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:32.790Z,1513271432.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:33.139Z,1513271433.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:33.590Z,1513271433.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:33.949Z,1513271433.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:34.386Z,1513271434.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:34.802Z,1513271434.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:35.163Z,1513271435.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:35.541Z,1513271435.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:35.942Z,1513271435.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:36.424Z,1513271436.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:36.775Z,1513271436.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:37.159Z,1513271437.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:37.532Z,1513271437.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:37.971Z,1513271437.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:38.422Z,1513271438.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:38.741Z,1513271438.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:39.149Z,1513271439.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:39.549Z,1513271439.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:40.029Z,1513271440.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:40.032Z,1513271440.032 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:05:39.8Z
2017-12-14T17:10:40.032Z,1513271440.032 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:10:40.032Z,1513271440.032 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:10:40.332Z,1513271440.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:41.160Z,1513271441.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:44.766Z,1513271444.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:44.846Z,1513271444.846 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0384.lzma
2017-12-14T17:10:44.894Z,1513271444.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:45.272Z,1513271445.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:45.598Z,1513271445.598 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0384.lzma.bak
2017-12-14T17:10:45.598Z,1513271445.598 [DataOverHttps](INFO): SBD MOMSN=5439210
2017-12-14T17:10:45.668Z,1513271445.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:46.834Z,1513271446.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:46.971Z,1513271446.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:50.478Z,1513271450.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:50.620Z,1513271450.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:50.979Z,1513271450.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:51.379Z,1513271451.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:51.746Z,1513271451.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:52.172Z,1513271452.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:55.732Z,1513271455.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:55.813Z,1513271455.813 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0385.lzma
2017-12-14T17:10:55.891Z,1513271455.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:56.228Z,1513271456.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:10:56.580Z,1513271456.580 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0385.lzma.bak
2017-12-14T17:10:56.580Z,1513271456.580 [DataOverHttps](INFO): SBD MOMSN=5439213
2017-12-14T17:10:56.680Z,1513271456.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:18.118Z,1513271478.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:18.118Z,1513271478.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 332
2017-12-14T17:11:18.118Z,1513271478.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:11:18.120Z,1513271478.120 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:18.120Z,1513271478.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 332
2017-12-14T17:11:18.120Z,1513271478.120 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:11:18.127Z,1513271478.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:18.127Z,1513271478.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 332
2017-12-14T17:11:18.127Z,1513271478.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:11:18.129Z,1513271478.129 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:11:18.129Z,1513271478.129 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:11:18.129Z,1513271478.129 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:11:18.144Z,1513271478.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:11:18.144Z,1513271478.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:11:18.144Z,1513271478.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:11:18.310Z,1513271478.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:11:18.310Z,1513271478.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 332
2017-12-14T17:11:18.312Z,1513271478.312 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:11:18.312Z,1513271478.312 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 332
2017-12-14T17:11:18.318Z,1513271478.318 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:11:18.319Z,1513271478.319 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 332
2017-12-14T17:11:25.823Z,1513271485.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:11:25.824Z,1513271485.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:11:25.824Z,1513271485.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:11:25.824Z,1513271485.824 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:11:25.825Z,1513271485.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:11:25.825Z,1513271485.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:11:25.858Z,1513271485.858 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:11:25.858Z,1513271485.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:11:25.858Z,1513271485.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:11:26.058Z,1513271486.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:26.450Z,1513271486.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:26.801Z,1513271486.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:27.164Z,1513271487.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:27.567Z,1513271487.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:28.033Z,1513271488.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:28.363Z,1513271488.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:28.771Z,1513271488.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:29.183Z,1513271489.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:29.563Z,1513271489.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:29.974Z,1513271489.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:30.353Z,1513271490.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:30.751Z,1513271490.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:31.188Z,1513271491.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:31.599Z,1513271491.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:32.028Z,1513271492.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:32.462Z,1513271492.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:32.790Z,1513271492.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:33.167Z,1513271493.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:33.625Z,1513271493.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:34.027Z,1513271494.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:34.458Z,1513271494.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:34.787Z,1513271494.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:35.191Z,1513271495.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:35.607Z,1513271495.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:36.130Z,1513271496.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:36.387Z,1513271496.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:36.838Z,1513271496.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:37.200Z,1513271497.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:37.588Z,1513271497.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:38.024Z,1513271498.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:38.381Z,1513271498.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:38.782Z,1513271498.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:39.185Z,1513271499.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:39.580Z,1513271499.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:40.045Z,1513271500.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:40.366Z,1513271500.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:40.782Z,1513271500.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:41.192Z,1513271501.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:41.567Z,1513271501.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:42.068Z,1513271502.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:42.371Z,1513271502.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:42.763Z,1513271502.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:43.179Z,1513271503.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:43.610Z,1513271503.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:43.975Z,1513271503.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:44.392Z,1513271504.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:44.759Z,1513271504.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:45.208Z,1513271505.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:45.314Z,1513271505.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:11:45.596Z,1513271505.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:46.012Z,1513271506.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:46.110Z,1513271506.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:11:46.455Z,1513271506.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:46.812Z,1513271506.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:47.213Z,1513271507.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:47.577Z,1513271507.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:48.043Z,1513271508.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:48.440Z,1513271508.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:48.776Z,1513271508.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:49.164Z,1513271509.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:49.616Z,1513271509.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:50.042Z,1513271510.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:50.391Z,1513271510.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:50.786Z,1513271510.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:51.176Z,1513271511.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:51.571Z,1513271511.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:52.089Z,1513271512.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:52.356Z,1513271512.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:52.755Z,1513271512.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:53.160Z,1513271513.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:53.571Z,1513271513.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:54.053Z,1513271514.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:54.374Z,1513271514.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:54.756Z,1513271514.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:55.167Z,1513271515.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:55.572Z,1513271515.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:56.060Z,1513271516.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:56.375Z,1513271516.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:56.755Z,1513271516.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:57.171Z,1513271517.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:57.574Z,1513271517.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:57.962Z,1513271517.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:58.404Z,1513271518.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:58.767Z,1513271518.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:59.170Z,1513271519.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:59.564Z,1513271519.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:11:59.963Z,1513271519.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:00.479Z,1513271520.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:00.739Z,1513271520.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:01.165Z,1513271521.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:01.595Z,1513271521.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:01.979Z,1513271521.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:02.428Z,1513271522.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:02.778Z,1513271522.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:03.195Z,1513271523.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:03.574Z,1513271523.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:04.042Z,1513271524.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:04.379Z,1513271524.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:04.780Z,1513271524.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:05.172Z,1513271525.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:05.571Z,1513271525.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:06.019Z,1513271526.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:06.375Z,1513271526.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:06.744Z,1513271526.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:07.163Z,1513271527.163 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T17:12:07.163Z,1513271527.163 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:12:07.163Z,1513271527.163 [BPC1](ERROR): Data Fault
2017-12-14T17:12:07.175Z,1513271527.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:07.188Z,1513271527.188 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:12:07.582Z,1513271527.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:08.066Z,1513271528.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:08.367Z,1513271528.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:08.380Z,1513271528.380 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:12:08.380Z,1513271528.380 [BPC1] No Fault, FailCount= 1
2017-12-14T17:12:08.814Z,1513271528.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:09.164Z,1513271529.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:09.573Z,1513271529.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:10.043Z,1513271530.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:10.371Z,1513271530.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:10.763Z,1513271530.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:11.169Z,1513271531.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:11.569Z,1513271531.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:11.969Z,1513271531.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:12.351Z,1513271532.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:12.752Z,1513271532.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:13.157Z,1513271533.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:13.557Z,1513271533.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:13.960Z,1513271533.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:14.462Z,1513271534.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:14.756Z,1513271534.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:15.162Z,1513271535.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:15.566Z,1513271535.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:15.975Z,1513271535.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:16.423Z,1513271536.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:16.751Z,1513271536.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:17.199Z,1513271537.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:17.563Z,1513271537.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:18.036Z,1513271538.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:18.395Z,1513271538.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:18.752Z,1513271538.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:22.555Z,1513271542.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:22.695Z,1513271542.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:23.051Z,1513271543.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:23.452Z,1513271543.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:23.823Z,1513271543.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:24.302Z,1513271544.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:24.628Z,1513271544.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:25.023Z,1513271545.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:25.459Z,1513271545.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:25.851Z,1513271545.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:26.255Z,1513271546.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:26.651Z,1513271546.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:27.024Z,1513271547.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:27.428Z,1513271547.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:27.826Z,1513271547.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:28.236Z,1513271548.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:28.699Z,1513271548.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:29.078Z,1513271549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:29.428Z,1513271549.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:29.825Z,1513271549.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:30.359Z,1513271550.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:30.627Z,1513271550.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:31.063Z,1513271551.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:31.436Z,1513271551.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:31.843Z,1513271551.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:32.240Z,1513271552.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:32.633Z,1513271552.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:33.039Z,1513271553.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:33.443Z,1513271553.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:33.876Z,1513271553.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:34.259Z,1513271554.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:34.860Z,1513271554.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:35.092Z,1513271555.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:35.424Z,1513271555.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:36.028Z,1513271556.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:36.311Z,1513271556.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:36.659Z,1513271556.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:37.099Z,1513271557.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:37.479Z,1513271557.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:37.937Z,1513271557.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:38.266Z,1513271558.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:38.643Z,1513271558.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:39.046Z,1513271559.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:39.508Z,1513271559.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:39.874Z,1513271559.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:40.329Z,1513271560.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:40.679Z,1513271560.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:41.110Z,1513271561.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:41.435Z,1513271561.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:41.832Z,1513271561.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:42.237Z,1513271562.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:42.644Z,1513271562.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:43.023Z,1513271563.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:43.444Z,1513271563.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:43.904Z,1513271563.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:44.243Z,1513271564.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:44.625Z,1513271564.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:45.038Z,1513271565.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:45.475Z,1513271565.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:45.846Z,1513271565.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:46.274Z,1513271566.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:46.644Z,1513271566.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:47.110Z,1513271567.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:47.435Z,1513271567.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:47.883Z,1513271567.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:48.272Z,1513271568.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:48.667Z,1513271568.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:49.071Z,1513271569.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:49.413Z,1513271569.413 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:12:49.413Z,1513271569.413 [NAL9602] Data Fault, FailCount= 1
2017-12-14T17:12:49.413Z,1513271569.413 [NAL9602](ERROR): Data Fault
2017-12-14T17:12:49.485Z,1513271569.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:49.539Z,1513271569.539 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:12:49.794Z,1513271569.794 [NAL9602](INFO): Powering down
2017-12-14T17:12:49.842Z,1513271569.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:50.248Z,1513271570.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:50.636Z,1513271570.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:50.650Z,1513271570.650 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:12:50.650Z,1513271570.650 [NAL9602] No Fault, FailCount= 1
2017-12-14T17:12:51.044Z,1513271571.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:51.447Z,1513271571.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:51.878Z,1513271571.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:52.268Z,1513271572.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:52.673Z,1513271572.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:53.078Z,1513271573.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:53.487Z,1513271573.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:53.868Z,1513271573.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:54.322Z,1513271574.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:54.715Z,1513271574.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:55.080Z,1513271575.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:55.521Z,1513271575.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:55.825Z,1513271575.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:56.223Z,1513271576.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:56.765Z,1513271576.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:57.040Z,1513271577.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:57.443Z,1513271577.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:57.824Z,1513271577.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:58.248Z,1513271578.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:58.683Z,1513271578.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:59.039Z,1513271579.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:59.441Z,1513271579.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:12:59.843Z,1513271579.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:00.231Z,1513271580.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:00.638Z,1513271580.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:01.032Z,1513271581.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:01.442Z,1513271581.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:01.859Z,1513271581.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:02.231Z,1513271582.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:02.656Z,1513271582.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:03.024Z,1513271583.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:03.427Z,1513271583.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:03.831Z,1513271583.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:04.226Z,1513271584.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:04.630Z,1513271584.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:05.111Z,1513271585.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:05.427Z,1513271585.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:05.823Z,1513271585.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:06.231Z,1513271586.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:06.622Z,1513271586.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:07.123Z,1513271587.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:07.471Z,1513271587.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:07.870Z,1513271587.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:08.285Z,1513271588.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:08.634Z,1513271588.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:09.066Z,1513271589.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:09.428Z,1513271589.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:09.825Z,1513271589.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:10.411Z,1513271590.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:10.684Z,1513271590.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:11.043Z,1513271591.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:11.459Z,1513271591.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:11.878Z,1513271591.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:12.240Z,1513271592.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:12.726Z,1513271592.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:13.045Z,1513271593.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:13.435Z,1513271593.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:13.839Z,1513271593.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:14.251Z,1513271594.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:14.727Z,1513271594.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:15.049Z,1513271595.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:15.482Z,1513271595.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:15.840Z,1513271595.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:16.237Z,1513271596.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:16.722Z,1513271596.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:17.035Z,1513271597.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:17.455Z,1513271597.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:17.833Z,1513271597.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:18.314Z,1513271598.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:18.646Z,1513271598.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:19.089Z,1513271599.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:25.659Z,1513271605.659 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:13:25.749Z,1513271605.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:25.941Z,1513271605.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:26.282Z,1513271606.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:26.712Z,1513271606.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:27.097Z,1513271607.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:27.490Z,1513271607.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:27.856Z,1513271607.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:28.268Z,1513271608.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:28.696Z,1513271608.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:29.063Z,1513271609.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:29.456Z,1513271609.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:29.866Z,1513271609.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:30.344Z,1513271610.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:30.667Z,1513271610.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:31.064Z,1513271611.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:31.472Z,1513271611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:31.879Z,1513271611.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:32.260Z,1513271612.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:32.666Z,1513271612.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:33.110Z,1513271613.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:33.514Z,1513271613.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:33.912Z,1513271613.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:34.279Z,1513271614.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:34.659Z,1513271614.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:35.055Z,1513271615.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:35.456Z,1513271615.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:35.857Z,1513271615.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:36.302Z,1513271616.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:36.620Z,1513271616.620 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:13:36.653Z,1513271616.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:37.082Z,1513271617.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:37.507Z,1513271617.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:37.967Z,1513271617.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:38.263Z,1513271618.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:38.696Z,1513271618.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:39.083Z,1513271619.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:39.487Z,1513271619.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:39.882Z,1513271619.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:40.361Z,1513271620.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:40.675Z,1513271620.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:41.064Z,1513271621.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:41.461Z,1513271621.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:42.050Z,1513271622.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:42.284Z,1513271622.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:42.651Z,1513271622.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:43.082Z,1513271623.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:43.492Z,1513271623.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:43.856Z,1513271623.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:44.296Z,1513271624.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:44.667Z,1513271624.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:45.063Z,1513271625.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:45.466Z,1513271625.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:45.864Z,1513271625.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:46.264Z,1513271626.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:46.770Z,1513271626.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:47.078Z,1513271627.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:47.449Z,1513271627.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:47.888Z,1513271627.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:48.259Z,1513271628.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:48.655Z,1513271628.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:49.065Z,1513271629.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:49.497Z,1513271629.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:49.869Z,1513271629.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:50.264Z,1513271630.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:50.684Z,1513271630.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:51.056Z,1513271631.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:51.484Z,1513271631.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:51.856Z,1513271631.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:52.262Z,1513271632.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:52.684Z,1513271632.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:53.069Z,1513271633.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:53.469Z,1513271633.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:53.929Z,1513271633.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:54.298Z,1513271634.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:54.696Z,1513271634.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:55.109Z,1513271635.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:55.476Z,1513271635.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:55.893Z,1513271635.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:56.355Z,1513271636.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:56.720Z,1513271636.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:57.089Z,1513271637.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:57.542Z,1513271637.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:57.891Z,1513271637.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:58.271Z,1513271638.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:58.670Z,1513271638.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:59.075Z,1513271639.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:59.493Z,1513271639.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:13:59.918Z,1513271639.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:00.255Z,1513271640.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:00.684Z,1513271640.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:01.091Z,1513271641.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:01.463Z,1513271641.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:02.054Z,1513271642.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:02.315Z,1513271642.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:02.654Z,1513271642.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:03.055Z,1513271643.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:03.488Z,1513271643.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:03.854Z,1513271643.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:04.263Z,1513271644.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:04.667Z,1513271644.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:05.060Z,1513271645.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:05.467Z,1513271645.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:05.853Z,1513271645.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:06.338Z,1513271646.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:06.679Z,1513271646.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:07.074Z,1513271647.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:07.476Z,1513271647.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:07.877Z,1513271647.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:08.250Z,1513271648.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:08.668Z,1513271648.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:09.051Z,1513271649.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:09.518Z,1513271649.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:09.855Z,1513271649.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:10.307Z,1513271650.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:10.682Z,1513271650.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:11.077Z,1513271651.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:11.452Z,1513271651.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:11.884Z,1513271651.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:12.263Z,1513271652.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:12.662Z,1513271652.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:13.098Z,1513271653.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:13.467Z,1513271653.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:13.872Z,1513271653.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:14.261Z,1513271654.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:14.662Z,1513271654.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:15.094Z,1513271655.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:15.467Z,1513271655.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:15.918Z,1513271655.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:16.284Z,1513271656.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:16.677Z,1513271656.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:17.068Z,1513271657.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:17.457Z,1513271657.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:17.855Z,1513271657.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:18.260Z,1513271658.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:18.664Z,1513271658.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:19.156Z,1513271659.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:23.928Z,1513271663.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:24.120Z,1513271664.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:24.501Z,1513271664.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:24.907Z,1513271664.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:25.282Z,1513271665.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:25.703Z,1513271665.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:26.088Z,1513271666.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:26.113Z,1513271666.113 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 333
2017-12-14T17:14:26.113Z,1513271666.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:14:26.216Z,1513271666.216 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:26.216Z,1513271666.216 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 333
2017-12-14T17:14:26.216Z,1513271666.216 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:14:26.218Z,1513271666.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:26.218Z,1513271666.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 333
2017-12-14T17:14:26.218Z,1513271666.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:14:26.246Z,1513271666.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:14:26.246Z,1513271666.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:14:26.263Z,1513271666.263 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:14:26.520Z,1513271666.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:14:26.520Z,1513271666.520 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 333
2017-12-14T17:14:26.520Z,1513271666.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:14:26.520Z,1513271666.520 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 333
2017-12-14T17:14:26.529Z,1513271666.529 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:14:26.529Z,1513271666.529 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 333
2017-12-14T17:14:26.875Z,1513271666.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:14:26.876Z,1513271666.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:14:26.876Z,1513271666.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:14:26.876Z,1513271666.876 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:14:26.877Z,1513271666.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:14:26.877Z,1513271666.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:14:26.878Z,1513271666.878 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:14:26.878Z,1513271666.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:14:26.878Z,1513271666.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:14:27.287Z,1513271667.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:27.682Z,1513271667.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:28.103Z,1513271668.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:28.479Z,1513271668.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:28.898Z,1513271668.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:29.291Z,1513271669.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:29.683Z,1513271669.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:30.096Z,1513271670.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:30.496Z,1513271670.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:30.866Z,1513271670.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:31.346Z,1513271671.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:31.717Z,1513271671.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:32.209Z,1513271672.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:32.523Z,1513271672.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:32.958Z,1513271672.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:33.271Z,1513271673.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:33.671Z,1513271673.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:34.111Z,1513271674.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:34.520Z,1513271674.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:34.868Z,1513271674.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:35.276Z,1513271675.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:35.722Z,1513271675.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:36.082Z,1513271676.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:36.518Z,1513271676.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:36.903Z,1513271676.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:37.264Z,1513271677.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:37.662Z,1513271677.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:38.099Z,1513271678.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:38.492Z,1513271678.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:38.899Z,1513271678.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:39.324Z,1513271679.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:39.664Z,1513271679.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:40.076Z,1513271680.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:40.512Z,1513271680.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:40.861Z,1513271680.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:41.272Z,1513271681.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:41.704Z,1513271681.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:42.152Z,1513271682.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:42.543Z,1513271682.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:42.868Z,1513271682.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:43.292Z,1513271683.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:43.665Z,1513271683.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:44.197Z,1513271684.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:44.496Z,1513271684.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:44.912Z,1513271684.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:45.413Z,1513271685.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:45.723Z,1513271685.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:46.223Z,1513271686.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:46.497Z,1513271686.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:46.939Z,1513271686.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:47.320Z,1513271687.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:47.751Z,1513271687.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:48.136Z,1513271688.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:48.503Z,1513271688.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:48.879Z,1513271688.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:49.282Z,1513271689.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:49.699Z,1513271689.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:50.090Z,1513271690.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:50.505Z,1513271690.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:50.891Z,1513271690.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:51.286Z,1513271691.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:51.664Z,1513271691.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:51.693Z,1513271691.693 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T17:14:51.693Z,1513271691.693 [DropWeight] No Fault, FailCount= 1
2017-12-14T17:14:52.087Z,1513271692.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:52.560Z,1513271692.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:52.894Z,1513271692.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:53.315Z,1513271693.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:53.741Z,1513271693.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:54.099Z,1513271694.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:54.510Z,1513271694.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:54.891Z,1513271694.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:55.272Z,1513271695.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:55.825Z,1513271695.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:56.152Z,1513271696.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:56.503Z,1513271696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:56.891Z,1513271696.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:57.275Z,1513271697.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:57.683Z,1513271697.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:58.129Z,1513271698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:58.530Z,1513271698.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:58.879Z,1513271698.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:59.381Z,1513271699.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:14:59.739Z,1513271699.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:00.167Z,1513271700.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:00.460Z,1513271700.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:00.915Z,1513271700.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:01.302Z,1513271701.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:01.709Z,1513271701.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:02.103Z,1513271702.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:02.502Z,1513271702.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:02.923Z,1513271702.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:03.277Z,1513271703.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:03.673Z,1513271703.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:04.076Z,1513271704.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:04.487Z,1513271704.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:04.862Z,1513271704.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:05.296Z,1513271705.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:05.822Z,1513271705.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:06.092Z,1513271706.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:06.468Z,1513271706.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:06.893Z,1513271706.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:07.275Z,1513271707.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:07.720Z,1513271707.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:08.088Z,1513271708.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:08.477Z,1513271708.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:08.907Z,1513271708.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:09.278Z,1513271709.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:09.752Z,1513271709.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:10.116Z,1513271710.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:10.550Z,1513271710.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:10.875Z,1513271710.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:11.275Z,1513271711.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:11.672Z,1513271711.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:12.081Z,1513271712.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:12.479Z,1513271712.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:12.856Z,1513271712.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:13.258Z,1513271713.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:13.680Z,1513271713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:14.134Z,1513271714.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:14.468Z,1513271714.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:14.898Z,1513271714.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:15.264Z,1513271715.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:15.674Z,1513271715.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:16.079Z,1513271716.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:16.483Z,1513271716.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:16.878Z,1513271716.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:17.283Z,1513271717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:17.683Z,1513271717.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:18.126Z,1513271718.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:18.535Z,1513271718.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:18.879Z,1513271718.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:19.277Z,1513271719.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:22.848Z,1513271722.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:23.011Z,1513271723.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:23.336Z,1513271723.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:23.743Z,1513271723.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:24.138Z,1513271724.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:24.534Z,1513271724.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:24.967Z,1513271724.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:25.339Z,1513271725.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:25.741Z,1513271725.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:26.112Z,1513271726.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:26.537Z,1513271726.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:27.039Z,1513271727.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:27.339Z,1513271727.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:27.738Z,1513271727.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:28.151Z,1513271728.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:28.534Z,1513271728.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:28.963Z,1513271728.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:29.345Z,1513271729.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:29.745Z,1513271729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:30.166Z,1513271730.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:30.523Z,1513271730.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:30.959Z,1513271730.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:31.373Z,1513271731.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:31.779Z,1513271731.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:32.124Z,1513271732.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:32.524Z,1513271732.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:32.950Z,1513271732.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:33.325Z,1513271733.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:33.727Z,1513271733.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:34.127Z,1513271734.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:34.560Z,1513271734.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:34.926Z,1513271734.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:35.335Z,1513271735.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:35.729Z,1513271735.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:36.132Z,1513271736.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:36.531Z,1513271736.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:36.924Z,1513271736.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:37.325Z,1513271737.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:37.758Z,1513271737.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:38.160Z,1513271738.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:38.536Z,1513271738.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:38.939Z,1513271738.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:39.323Z,1513271739.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:39.723Z,1513271739.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:40.155Z,1513271740.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:40.530Z,1513271740.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:40.978Z,1513271740.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:41.340Z,1513271741.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:41.731Z,1513271741.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:42.130Z,1513271742.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:42.530Z,1513271742.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:42.937Z,1513271742.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:43.337Z,1513271743.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:43.728Z,1513271743.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:44.220Z,1513271744.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:44.539Z,1513271744.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:44.933Z,1513271744.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:45.335Z,1513271745.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:45.733Z,1513271745.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:46.124Z,1513271746.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:46.526Z,1513271746.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:46.934Z,1513271746.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:47.362Z,1513271747.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:47.743Z,1513271747.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:48.135Z,1513271748.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:48.531Z,1513271748.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:48.943Z,1513271748.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:49.343Z,1513271749.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:49.739Z,1513271749.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:50.116Z,1513271750.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:50.583Z,1513271750.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:50.948Z,1513271750.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:51.328Z,1513271751.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:51.745Z,1513271751.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:52.168Z,1513271752.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:52.523Z,1513271752.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:52.928Z,1513271752.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:53.362Z,1513271753.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:53.793Z,1513271753.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:54.155Z,1513271754.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:54.531Z,1513271754.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:54.929Z,1513271754.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:55.318Z,1513271755.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:55.720Z,1513271755.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:56.133Z,1513271756.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:56.527Z,1513271756.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:56.984Z,1513271756.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:57.339Z,1513271757.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:57.728Z,1513271757.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:58.126Z,1513271758.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:58.533Z,1513271758.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:58.924Z,1513271758.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:59.329Z,1513271759.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:15:59.737Z,1513271759.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:00.190Z,1513271760.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:00.526Z,1513271760.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:00.943Z,1513271760.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:01.326Z,1513271761.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:01.722Z,1513271761.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:02.134Z,1513271762.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:02.570Z,1513271762.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:02.935Z,1513271762.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:03.375Z,1513271763.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:03.728Z,1513271763.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:04.131Z,1513271764.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:04.515Z,1513271764.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:04.944Z,1513271764.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:05.340Z,1513271765.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:05.747Z,1513271765.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:06.123Z,1513271766.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:06.556Z,1513271766.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:06.928Z,1513271766.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:07.324Z,1513271767.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:07.773Z,1513271767.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:08.127Z,1513271768.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:08.527Z,1513271768.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:08.934Z,1513271768.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:09.344Z,1513271769.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:09.783Z,1513271769.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:10.139Z,1513271770.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:10.524Z,1513271770.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:10.944Z,1513271770.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:11.338Z,1513271771.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:11.734Z,1513271771.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:12.131Z,1513271772.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:12.533Z,1513271772.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:12.967Z,1513271772.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:13.359Z,1513271773.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:13.737Z,1513271773.737 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T17:16:13.737Z,1513271773.737 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:16:13.737Z,1513271773.737 [BPC1](ERROR): Data Fault
2017-12-14T17:16:13.762Z,1513271773.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:13.792Z,1513271773.792 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:16:14.148Z,1513271774.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:14.543Z,1513271774.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:14.915Z,1513271774.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:14.945Z,1513271774.945 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:16:14.945Z,1513271774.945 [BPC1] No Fault, FailCount= 1
2017-12-14T17:16:15.371Z,1513271775.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:15.720Z,1513271775.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:16.175Z,1513271776.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:16.524Z,1513271776.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:16.925Z,1513271776.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:17.327Z,1513271777.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:17.723Z,1513271777.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:18.119Z,1513271778.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:18.521Z,1513271778.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:18.524Z,1513271778.524 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:16:18.533Z,1513271778.533 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:16:18.533Z,1513271778.533 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:16:18.533Z,1513271778.533 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:16:18.976Z,1513271778.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:18.980Z,1513271778.980 [Default:CheckIn:D] Stopped
2017-12-14T17:16:18.980Z,1513271778.980 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:16:19.427Z,1513271779.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:19.435Z,1513271779.435 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1003.059831 min 
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn:E] Stopped
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn] Stopped
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn](INFO): Running loop #97
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn] Running Loop=97
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:16:19.436Z,1513271779.436 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:16:29.141Z,1513271789.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:29.282Z,1513271789.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:29.719Z,1513271789.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:30.174Z,1513271790.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:30.490Z,1513271790.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:30.913Z,1513271790.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:31.278Z,1513271791.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:31.719Z,1513271791.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:32.159Z,1513271792.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:32.480Z,1513271792.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:32.909Z,1513271792.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:33.275Z,1513271793.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:33.682Z,1513271793.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:34.133Z,1513271794.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:34.514Z,1513271794.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:34.895Z,1513271794.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:35.285Z,1513271795.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:35.688Z,1513271795.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:36.163Z,1513271796.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:36.496Z,1513271796.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:36.895Z,1513271796.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:37.269Z,1513271797.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:37.712Z,1513271797.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:38.171Z,1513271798.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:38.479Z,1513271798.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:38.852Z,1513271798.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:39.276Z,1513271799.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:39.653Z,1513271799.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:40.061Z,1513271800.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:40.504Z,1513271800.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:40.923Z,1513271800.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:41.258Z,1513271801.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:41.663Z,1513271801.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:42.071Z,1513271802.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:42.462Z,1513271802.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:42.887Z,1513271802.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:43.275Z,1513271803.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:43.646Z,1513271803.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:44.077Z,1513271804.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:44.448Z,1513271804.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:44.848Z,1513271804.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:45.249Z,1513271805.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:45.643Z,1513271805.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:46.092Z,1513271806.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:46.483Z,1513271806.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:46.856Z,1513271806.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:47.247Z,1513271807.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:47.651Z,1513271807.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:48.085Z,1513271808.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:48.479Z,1513271808.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:48.857Z,1513271808.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:49.301Z,1513271809.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:49.664Z,1513271809.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:50.082Z,1513271810.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:50.460Z,1513271810.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:50.855Z,1513271810.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:51.272Z,1513271811.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:51.653Z,1513271811.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:52.125Z,1513271812.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:52.508Z,1513271812.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:52.863Z,1513271812.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:53.253Z,1513271813.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:53.647Z,1513271813.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:54.047Z,1513271814.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:54.454Z,1513271814.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:54.848Z,1513271814.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:55.258Z,1513271815.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:55.671Z,1513271815.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:56.063Z,1513271816.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:56.463Z,1513271816.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:56.855Z,1513271816.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:57.270Z,1513271817.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:57.678Z,1513271817.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:58.079Z,1513271818.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:58.480Z,1513271818.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:58.916Z,1513271818.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:59.275Z,1513271819.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:16:59.651Z,1513271819.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:00.080Z,1513271820.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:00.455Z,1513271820.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:00.865Z,1513271820.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:01.264Z,1513271821.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:01.663Z,1513271821.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:02.158Z,1513271822.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:02.460Z,1513271822.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:02.853Z,1513271822.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:03.246Z,1513271823.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:03.713Z,1513271823.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:04.091Z,1513271824.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:04.498Z,1513271824.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:04.903Z,1513271824.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:05.271Z,1513271825.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:05.706Z,1513271825.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:06.124Z,1513271826.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:06.452Z,1513271826.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:06.879Z,1513271826.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:07.293Z,1513271827.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:07.694Z,1513271827.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:08.090Z,1513271828.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:08.501Z,1513271828.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:08.892Z,1513271828.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:09.292Z,1513271829.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:09.675Z,1513271829.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:10.110Z,1513271830.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:10.548Z,1513271830.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:10.905Z,1513271830.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:11.251Z,1513271831.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:11.650Z,1513271831.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:12.088Z,1513271832.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:12.471Z,1513271832.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:12.899Z,1513271832.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:13.284Z,1513271833.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:13.672Z,1513271833.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:14.124Z,1513271834.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:14.491Z,1513271834.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:14.889Z,1513271834.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:15.260Z,1513271835.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:15.654Z,1513271835.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:16.103Z,1513271836.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:16.468Z,1513271836.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:16.862Z,1513271836.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:17.249Z,1513271837.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:17.706Z,1513271837.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:18.076Z,1513271838.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:18.471Z,1513271838.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:18.867Z,1513271838.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:19.290Z,1513271839.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:19.671Z,1513271839.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:25.610Z,1513271845.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:25.748Z,1513271845.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.143Z,1513271846.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.582Z,1513271846.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.947Z,1513271846.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.947Z,1513271846.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 334
2017-12-14T17:17:26.947Z,1513271846.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:17:26.948Z,1513271846.948 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.953Z,1513271846.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 334
2017-12-14T17:17:26.953Z,1513271846.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:17:26.955Z,1513271846.955 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:26.955Z,1513271846.955 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 334
2017-12-14T17:17:26.955Z,1513271846.955 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:17:27.007Z,1513271847.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:17:27.007Z,1513271847.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:17:27.008Z,1513271847.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:17:27.423Z,1513271847.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:17:27.423Z,1513271847.423 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 334
2017-12-14T17:17:27.423Z,1513271847.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:17:27.423Z,1513271847.423 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 334
2017-12-14T17:17:27.424Z,1513271847.424 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:17:27.424Z,1513271847.424 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 334
2017-12-14T17:17:27.734Z,1513271847.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:17:27.735Z,1513271847.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:17:27.735Z,1513271847.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:17:27.735Z,1513271847.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:17:27.736Z,1513271847.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:17:27.736Z,1513271847.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:17:27.736Z,1513271847.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:17:27.761Z,1513271847.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:17:27.761Z,1513271847.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:17:28.170Z,1513271848.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:28.575Z,1513271848.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:28.943Z,1513271848.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:29.338Z,1513271849.338 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:17:29.338Z,1513271849.338 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:17:29.338Z,1513271849.338 [BPC1](ERROR): Communications Fault
2017-12-14T17:17:29.387Z,1513271849.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:29.445Z,1513271849.445 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:17:29.799Z,1513271849.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:30.148Z,1513271850.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:30.548Z,1513271850.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:30.595Z,1513271850.595 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:17:30.595Z,1513271850.595 [BPC1] No Fault, FailCount= 1
2017-12-14T17:17:31.045Z,1513271851.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:31.351Z,1513271851.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:31.752Z,1513271851.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:32.156Z,1513271852.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:32.587Z,1513271852.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:32.928Z,1513271852.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:33.327Z,1513271853.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:33.728Z,1513271853.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:34.124Z,1513271854.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:34.515Z,1513271854.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:34.925Z,1513271854.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:35.328Z,1513271855.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:35.722Z,1513271855.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:36.204Z,1513271856.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:36.523Z,1513271856.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:36.920Z,1513271856.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:37.343Z,1513271857.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:37.751Z,1513271857.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:38.147Z,1513271858.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:38.520Z,1513271858.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:38.954Z,1513271858.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:39.346Z,1513271859.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:39.716Z,1513271859.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:40.121Z,1513271860.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:40.524Z,1513271860.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:40.924Z,1513271860.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:41.312Z,1513271861.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:41.714Z,1513271861.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:42.111Z,1513271862.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:42.574Z,1513271862.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:42.921Z,1513271862.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:43.323Z,1513271863.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:43.731Z,1513271863.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:44.130Z,1513271864.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:44.535Z,1513271864.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:44.942Z,1513271864.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:45.342Z,1513271865.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:45.735Z,1513271865.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:46.137Z,1513271866.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:46.523Z,1513271866.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:46.943Z,1513271866.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:47.336Z,1513271867.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:47.729Z,1513271867.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:48.154Z,1513271868.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:48.526Z,1513271868.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:48.982Z,1513271868.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:49.338Z,1513271869.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:49.739Z,1513271869.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:50.122Z,1513271870.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:50.535Z,1513271870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:50.935Z,1513271870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:51.406Z,1513271871.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:51.744Z,1513271871.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:52.159Z,1513271872.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:52.516Z,1513271872.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:52.963Z,1513271872.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:53.340Z,1513271873.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:53.741Z,1513271873.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:54.116Z,1513271874.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:54.517Z,1513271874.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:54.934Z,1513271874.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:55.328Z,1513271875.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:55.731Z,1513271875.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:56.130Z,1513271876.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:56.538Z,1513271876.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:56.936Z,1513271876.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:57.340Z,1513271877.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:57.739Z,1513271877.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:58.111Z,1513271878.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:58.535Z,1513271878.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:58.966Z,1513271878.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:59.341Z,1513271879.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:17:59.741Z,1513271879.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:00.118Z,1513271880.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:00.516Z,1513271880.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:00.938Z,1513271880.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:01.368Z,1513271881.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:01.789Z,1513271881.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:02.151Z,1513271882.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:02.521Z,1513271882.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:02.921Z,1513271882.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:03.347Z,1513271883.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:03.725Z,1513271883.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:04.128Z,1513271884.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:04.516Z,1513271884.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:04.929Z,1513271884.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:05.371Z,1513271885.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:05.730Z,1513271885.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:06.119Z,1513271886.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:06.523Z,1513271886.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:06.920Z,1513271886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:07.329Z,1513271887.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:07.727Z,1513271887.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:08.135Z,1513271888.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:08.568Z,1513271888.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:08.928Z,1513271888.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:09.318Z,1513271889.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:09.719Z,1513271889.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:10.124Z,1513271890.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:10.524Z,1513271890.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:10.925Z,1513271890.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:11.322Z,1513271891.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:11.756Z,1513271891.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:12.130Z,1513271892.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:12.527Z,1513271892.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:12.923Z,1513271892.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:13.414Z,1513271893.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:13.752Z,1513271893.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:14.120Z,1513271894.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:14.559Z,1513271894.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:14.967Z,1513271894.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:15.351Z,1513271895.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:15.734Z,1513271895.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:16.142Z,1513271896.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:16.547Z,1513271896.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:16.940Z,1513271896.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:17.323Z,1513271897.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:17.716Z,1513271897.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:18.159Z,1513271898.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:18.520Z,1513271898.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:18.961Z,1513271898.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:19.328Z,1513271899.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:19.728Z,1513271899.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:23.187Z,1513271903.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:23.313Z,1513271903.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:23.747Z,1513271903.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:24.124Z,1513271904.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:24.558Z,1513271904.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:24.901Z,1513271904.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:25.291Z,1513271905.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:25.689Z,1513271905.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:26.115Z,1513271906.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:26.510Z,1513271906.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:26.910Z,1513271906.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:27.295Z,1513271907.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:27.746Z,1513271907.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:28.096Z,1513271908.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:28.507Z,1513271908.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:28.899Z,1513271908.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:29.313Z,1513271909.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:29.708Z,1513271909.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:30.120Z,1513271910.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:30.496Z,1513271910.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:30.943Z,1513271910.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:31.311Z,1513271911.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:31.686Z,1513271911.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:32.113Z,1513271912.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:32.531Z,1513271912.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:32.912Z,1513271912.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:33.311Z,1513271913.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:33.693Z,1513271913.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:34.115Z,1513271914.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:34.512Z,1513271914.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:34.895Z,1513271914.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:35.321Z,1513271915.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:35.743Z,1513271915.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:36.151Z,1513271916.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:36.495Z,1513271916.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:36.964Z,1513271916.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:37.313Z,1513271917.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:37.743Z,1513271917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:38.134Z,1513271918.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:38.505Z,1513271918.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:38.909Z,1513271918.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:39.303Z,1513271919.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:39.698Z,1513271919.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:40.097Z,1513271920.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:40.514Z,1513271920.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:40.902Z,1513271920.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:41.308Z,1513271921.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:41.715Z,1513271921.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:42.109Z,1513271922.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:42.507Z,1513271922.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:42.907Z,1513271922.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:43.301Z,1513271923.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:43.756Z,1513271923.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:44.119Z,1513271924.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:44.523Z,1513271924.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:44.914Z,1513271924.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:45.308Z,1513271925.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:45.708Z,1513271925.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:46.124Z,1513271926.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:46.571Z,1513271926.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:46.955Z,1513271926.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:47.319Z,1513271927.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:47.714Z,1513271927.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:48.115Z,1513271928.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:48.512Z,1513271928.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:48.908Z,1513271928.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:49.291Z,1513271929.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:49.715Z,1513271929.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:50.134Z,1513271930.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:50.519Z,1513271930.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:50.916Z,1513271930.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:51.290Z,1513271931.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:51.701Z,1513271931.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:52.117Z,1513271932.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:52.495Z,1513271932.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:52.891Z,1513271932.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:53.373Z,1513271933.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:53.701Z,1513271933.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:54.131Z,1513271934.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:54.503Z,1513271934.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:54.896Z,1513271934.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:55.310Z,1513271935.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:55.707Z,1513271935.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:56.111Z,1513271936.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:56.525Z,1513271936.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:56.908Z,1513271936.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:57.309Z,1513271937.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:57.685Z,1513271937.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:58.171Z,1513271938.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:58.542Z,1513271938.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:58.893Z,1513271938.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:59.318Z,1513271939.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:18:59.790Z,1513271939.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:00.108Z,1513271940.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:00.535Z,1513271940.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:00.900Z,1513271940.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:01.307Z,1513271941.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:01.700Z,1513271941.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:02.108Z,1513271942.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:02.508Z,1513271942.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:02.955Z,1513271942.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:03.315Z,1513271943.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:03.715Z,1513271943.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:04.096Z,1513271944.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:04.501Z,1513271944.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:04.907Z,1513271944.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:05.301Z,1513271945.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:05.708Z,1513271945.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:06.154Z,1513271946.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:06.502Z,1513271946.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:06.903Z,1513271946.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:07.305Z,1513271947.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:07.707Z,1513271947.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:08.111Z,1513271948.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:08.512Z,1513271948.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:08.954Z,1513271948.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:09.390Z,1513271949.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:09.702Z,1513271949.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:10.103Z,1513271950.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:10.504Z,1513271950.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:10.903Z,1513271950.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:11.310Z,1513271951.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:11.715Z,1513271951.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:12.122Z,1513271952.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:12.507Z,1513271952.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:12.907Z,1513271952.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:13.299Z,1513271953.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:13.708Z,1513271953.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:14.111Z,1513271954.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:14.512Z,1513271954.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:14.923Z,1513271954.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:15.318Z,1513271955.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:15.763Z,1513271955.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:16.103Z,1513271956.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:16.496Z,1513271956.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:16.897Z,1513271956.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:17.325Z,1513271957.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:17.704Z,1513271957.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:18.101Z,1513271958.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:18.497Z,1513271958.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:18.956Z,1513271958.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:19.296Z,1513271959.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:19.743Z,1513271959.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:20.111Z,1513271960.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:23.695Z,1513271963.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:23.839Z,1513271963.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:24.185Z,1513271964.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:24.585Z,1513271964.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:24.963Z,1513271964.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:25.399Z,1513271965.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:25.766Z,1513271965.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:26.207Z,1513271966.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:26.606Z,1513271966.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:26.976Z,1513271966.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:27.370Z,1513271967.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:27.764Z,1513271967.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:28.172Z,1513271968.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:28.571Z,1513271968.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:28.584Z,1513271968.584 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:19:28.975Z,1513271968.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:29.377Z,1513271969.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:29.783Z,1513271969.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:30.168Z,1513271970.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:30.568Z,1513271970.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:30.974Z,1513271970.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:31.370Z,1513271971.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:31.775Z,1513271971.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:32.176Z,1513271972.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:32.582Z,1513271972.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:32.985Z,1513271972.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:33.373Z,1513271973.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:33.768Z,1513271973.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:34.178Z,1513271974.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:34.631Z,1513271974.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:34.975Z,1513271974.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:35.390Z,1513271975.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:35.784Z,1513271975.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:36.184Z,1513271976.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:36.583Z,1513271976.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:36.986Z,1513271976.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:37.391Z,1513271977.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:37.807Z,1513271977.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:38.165Z,1513271978.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:38.568Z,1513271978.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:38.967Z,1513271978.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:39.364Z,1513271979.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:39.767Z,1513271979.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:40.195Z,1513271980.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:40.588Z,1513271980.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:41.011Z,1513271981.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:41.371Z,1513271981.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:41.771Z,1513271981.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:42.175Z,1513271982.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:42.571Z,1513271982.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:42.976Z,1513271982.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:43.372Z,1513271983.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:43.774Z,1513271983.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:44.218Z,1513271984.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:44.575Z,1513271984.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:44.970Z,1513271984.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:45.421Z,1513271985.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:45.767Z,1513271985.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:46.174Z,1513271986.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:46.630Z,1513271986.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:46.980Z,1513271986.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:47.373Z,1513271987.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:47.806Z,1513271987.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:48.175Z,1513271988.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:48.591Z,1513271988.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:48.981Z,1513271988.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:49.385Z,1513271989.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:49.788Z,1513271989.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:50.175Z,1513271990.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:50.571Z,1513271990.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:50.981Z,1513271990.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:51.369Z,1513271991.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:51.766Z,1513271991.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:52.199Z,1513271992.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:52.595Z,1513271992.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:52.995Z,1513271992.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:53.368Z,1513271993.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:53.852Z,1513271993.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:54.172Z,1513271994.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:54.570Z,1513271994.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:54.978Z,1513271994.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:55.376Z,1513271995.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:55.776Z,1513271995.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:56.171Z,1513271996.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:56.564Z,1513271996.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:57.036Z,1513271997.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:57.375Z,1513271997.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:57.767Z,1513271997.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:58.176Z,1513271998.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:58.576Z,1513271998.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:58.987Z,1513271998.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:59.378Z,1513271999.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:19:59.779Z,1513271999.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:00.234Z,1513272000.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:00.576Z,1513272000.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:00.980Z,1513272000.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:01.386Z,1513272001.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:01.783Z,1513272001.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:02.168Z,1513272002.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:02.580Z,1513272002.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:02.968Z,1513272002.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:03.425Z,1513272003.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:03.780Z,1513272003.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:04.179Z,1513272004.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:04.596Z,1513272004.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:04.991Z,1513272004.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:05.390Z,1513272005.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:05.783Z,1513272005.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:06.188Z,1513272006.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:06.638Z,1513272006.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:06.968Z,1513272006.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:07.416Z,1513272007.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:07.794Z,1513272007.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:08.190Z,1513272008.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:08.567Z,1513272008.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:09.004Z,1513272009.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:09.371Z,1513272009.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:09.855Z,1513272009.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:10.215Z,1513272010.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:10.579Z,1513272010.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:11.007Z,1513272011.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:11.366Z,1513272011.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:11.767Z,1513272011.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:12.168Z,1513272012.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:12.572Z,1513272012.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:13.052Z,1513272013.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:13.379Z,1513272013.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:13.780Z,1513272013.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:14.166Z,1513272014.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:14.568Z,1513272014.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:14.968Z,1513272014.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:15.375Z,1513272015.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:15.827Z,1513272015.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:16.232Z,1513272016.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:16.576Z,1513272016.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:16.972Z,1513272016.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:17.368Z,1513272017.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:17.770Z,1513272017.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:18.175Z,1513272018.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:18.566Z,1513272018.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:18.972Z,1513272018.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:19.467Z,1513272019.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:19.780Z,1513272019.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:20.175Z,1513272020.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:23.663Z,1513272023.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:23.800Z,1513272023.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:24.158Z,1513272024.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:24.566Z,1513272024.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:24.961Z,1513272024.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:25.342Z,1513272025.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:25.799Z,1513272025.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:26.139Z,1513272026.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:26.568Z,1513272026.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:26.948Z,1513272026.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:27.348Z,1513272027.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:27.750Z,1513272027.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:27.750Z,1513272027.750 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 335
2017-12-14T17:20:27.750Z,1513272027.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:20:27.752Z,1513272027.752 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:27.752Z,1513272027.752 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 335
2017-12-14T17:20:27.752Z,1513272027.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:20:27.758Z,1513272027.758 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:27.758Z,1513272027.758 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 335
2017-12-14T17:20:27.758Z,1513272027.758 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:20:27.778Z,1513272027.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:20:27.778Z,1513272027.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:20:27.779Z,1513272027.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:20:28.154Z,1513272028.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:20:28.154Z,1513272028.154 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 335
2017-12-14T17:20:28.154Z,1513272028.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:20:28.154Z,1513272028.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 335
2017-12-14T17:20:28.155Z,1513272028.155 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:20:28.155Z,1513272028.155 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 335
2017-12-14T17:20:28.545Z,1513272028.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:20:28.545Z,1513272028.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:20:28.546Z,1513272028.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:20:28.546Z,1513272028.546 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:20:28.546Z,1513272028.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:20:28.547Z,1513272028.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:20:28.547Z,1513272028.547 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:20:28.547Z,1513272028.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:20:28.548Z,1513272028.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:20:28.992Z,1513272028.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:29.355Z,1513272029.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:29.748Z,1513272029.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:30.163Z,1513272030.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:30.542Z,1513272030.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:30.951Z,1513272030.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:31.396Z,1513272031.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:31.755Z,1513272031.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:32.247Z,1513272032.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:32.539Z,1513272032.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:32.983Z,1513272032.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:33.352Z,1513272033.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:33.748Z,1513272033.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:34.137Z,1513272034.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:34.541Z,1513272034.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:34.950Z,1513272034.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:35.390Z,1513272035.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:35.745Z,1513272035.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:36.143Z,1513272036.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:36.543Z,1513272036.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:36.956Z,1513272036.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:37.347Z,1513272037.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:37.765Z,1513272037.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:38.145Z,1513272038.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:38.581Z,1513272038.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:38.957Z,1513272038.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:39.359Z,1513272039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:39.758Z,1513272039.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:40.132Z,1513272040.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:40.535Z,1513272040.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:40.959Z,1513272040.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:41.376Z,1513272041.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:41.810Z,1513272041.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:42.155Z,1513272042.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:42.555Z,1513272042.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:42.934Z,1513272042.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:43.335Z,1513272043.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:43.733Z,1513272043.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:44.156Z,1513272044.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:44.563Z,1513272044.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:45.018Z,1513272045.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:45.339Z,1513272045.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:45.736Z,1513272045.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:46.136Z,1513272046.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:46.534Z,1513272046.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:46.959Z,1513272046.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:47.363Z,1513272047.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:47.762Z,1513272047.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:48.182Z,1513272048.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:48.537Z,1513272048.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:48.945Z,1513272048.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:49.359Z,1513272049.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:49.751Z,1513272049.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:50.140Z,1513272050.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:50.541Z,1513272050.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:50.959Z,1513272050.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:51.396Z,1513272051.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:51.746Z,1513272051.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:52.159Z,1513272052.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:52.563Z,1513272052.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:52.955Z,1513272052.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:53.396Z,1513272053.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:53.754Z,1513272053.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:54.147Z,1513272054.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:54.622Z,1513272054.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:54.959Z,1513272054.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:55.391Z,1513272055.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:55.755Z,1513272055.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:56.149Z,1513272056.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:56.547Z,1513272056.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:56.953Z,1513272056.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:57.360Z,1513272057.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:57.806Z,1513272057.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:58.135Z,1513272058.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:58.559Z,1513272058.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:58.933Z,1513272058.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:59.332Z,1513272059.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:20:59.735Z,1513272059.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:00.165Z,1513272060.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:00.560Z,1513272060.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:00.979Z,1513272060.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:01.336Z,1513272061.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:01.770Z,1513272061.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:02.135Z,1513272062.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:02.539Z,1513272062.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:02.945Z,1513272062.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:03.345Z,1513272063.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:03.778Z,1513272063.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:04.235Z,1513272064.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:04.535Z,1513272064.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:04.942Z,1513272064.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:05.343Z,1513272065.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:05.743Z,1513272065.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:06.137Z,1513272066.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:06.544Z,1513272066.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:06.947Z,1513272066.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:07.383Z,1513272067.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:07.752Z,1513272067.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:08.144Z,1513272068.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:08.536Z,1513272068.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:08.944Z,1513272068.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:09.344Z,1513272069.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:09.751Z,1513272069.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:10.141Z,1513272070.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:10.593Z,1513272070.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:10.947Z,1513272070.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:11.348Z,1513272071.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:11.752Z,1513272071.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:12.148Z,1513272072.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:12.543Z,1513272072.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:12.959Z,1513272072.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:13.351Z,1513272073.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:13.795Z,1513272073.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:14.126Z,1513272074.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:14.563Z,1513272074.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:14.933Z,1513272074.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:15.336Z,1513272075.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:15.780Z,1513272075.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:16.166Z,1513272076.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:16.544Z,1513272076.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:17.087Z,1513272077.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:17.342Z,1513272077.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:17.763Z,1513272077.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:18.155Z,1513272078.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:18.577Z,1513272078.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:18.990Z,1513272078.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:19.394Z,1513272079.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:19.767Z,1513272079.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:19.789Z,1513272079.789 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:16:19.4Z
2017-12-14T17:21:19.789Z,1513272079.789 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:21:19.789Z,1513272079.789 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:21:20.157Z,1513272080.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:21.863Z,1513272081.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:27.857Z,1513272087.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:27.921Z,1513272087.921 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0388.lzma
2017-12-14T17:21:28.068Z,1513272088.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:28.375Z,1513272088.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:28.684Z,1513272088.684 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0388.lzma.bak
2017-12-14T17:21:28.684Z,1513272088.684 [DataOverHttps](INFO): SBD MOMSN=5439246
2017-12-14T17:21:28.768Z,1513272088.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:30.715Z,1513272090.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:30.858Z,1513272090.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:37.899Z,1513272097.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:38.121Z,1513272098.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:38.528Z,1513272098.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:38.946Z,1513272098.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:39.331Z,1513272099.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:39.696Z,1513272099.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:46.495Z,1513272106.495 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:21:46.495Z,1513272106.495 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:21:46.495Z,1513272106.495 [BPC1](ERROR): Communications Fault
2017-12-14T17:21:46.511Z,1513272106.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:46.572Z,1513272106.572 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:21:46.607Z,1513272106.607 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0389.lzma
2017-12-14T17:21:46.739Z,1513272106.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:47.070Z,1513272107.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:47.396Z,1513272107.396 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0389.lzma.bak
2017-12-14T17:21:47.396Z,1513272107.396 [DataOverHttps](INFO): SBD MOMSN=5439248
2017-12-14T17:21:47.476Z,1513272107.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:47.519Z,1513272107.519 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:21:47.519Z,1513272107.519 [BPC1] No Fault, FailCount= 1
2017-12-14T17:21:49.551Z,1513272109.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:49.558Z,1513272109.558 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:21:49.559Z,1513272109.559 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:21:49.559Z,1513272109.559 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:21:49.715Z,1513272109.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:56.510Z,1513272116.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:56.663Z,1513272116.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:57.083Z,1513272117.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:57.483Z,1513272117.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:57.847Z,1513272117.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:58.232Z,1513272118.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:58.629Z,1513272118.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:59.031Z,1513272119.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:59.452Z,1513272119.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:21:59.834Z,1513272119.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:00.246Z,1513272120.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:00.618Z,1513272120.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:01.006Z,1513272121.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:01.415Z,1513272121.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:01.854Z,1513272121.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:02.242Z,1513272122.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:02.627Z,1513272122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:03.032Z,1513272123.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:03.434Z,1513272123.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:03.831Z,1513272123.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:04.211Z,1513272124.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:04.649Z,1513272124.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:05.020Z,1513272125.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:05.419Z,1513272125.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:05.847Z,1513272125.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:06.215Z,1513272126.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:06.619Z,1513272126.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:07.027Z,1513272127.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:07.416Z,1513272127.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:07.822Z,1513272127.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:08.259Z,1513272128.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:08.637Z,1513272128.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:09.062Z,1513272129.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:09.467Z,1513272129.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:09.843Z,1513272129.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:10.226Z,1513272130.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:10.619Z,1513272130.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:11.063Z,1513272131.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:11.431Z,1513272131.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:11.868Z,1513272131.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:12.226Z,1513272132.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:12.667Z,1513272132.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:13.029Z,1513272133.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:13.425Z,1513272133.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:13.825Z,1513272133.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:14.242Z,1513272134.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:14.639Z,1513272134.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:15.039Z,1513272135.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:15.428Z,1513272135.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:15.875Z,1513272135.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:16.230Z,1513272136.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:16.638Z,1513272136.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:17.067Z,1513272137.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:17.442Z,1513272137.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:17.824Z,1513272137.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:18.231Z,1513272138.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:18.623Z,1513272138.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:19.054Z,1513272139.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:19.416Z,1513272139.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:19.819Z,1513272139.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:20.260Z,1513272140.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:20.620Z,1513272140.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:21.019Z,1513272141.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:21.453Z,1513272141.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:21.819Z,1513272141.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:22.308Z,1513272142.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:22.620Z,1513272142.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:23.019Z,1513272143.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:23.420Z,1513272143.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:23.832Z,1513272143.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:24.250Z,1513272144.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:24.619Z,1513272144.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:25.018Z,1513272145.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:25.454Z,1513272145.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:25.823Z,1513272145.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:26.229Z,1513272146.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:26.639Z,1513272146.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:27.032Z,1513272147.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:27.422Z,1513272147.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:27.827Z,1513272147.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:28.222Z,1513272148.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:28.687Z,1513272148.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:29.030Z,1513272149.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:29.429Z,1513272149.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:29.834Z,1513272149.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:30.224Z,1513272150.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:30.628Z,1513272150.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:31.029Z,1513272151.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:31.408Z,1513272151.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:31.922Z,1513272151.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:32.267Z,1513272152.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:32.639Z,1513272152.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:33.056Z,1513272153.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:33.406Z,1513272153.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:33.847Z,1513272153.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:34.232Z,1513272154.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:34.608Z,1513272154.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:35.053Z,1513272155.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:35.436Z,1513272155.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:35.834Z,1513272155.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:36.225Z,1513272156.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:36.619Z,1513272156.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:37.015Z,1513272157.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:37.419Z,1513272157.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:37.810Z,1513272157.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:38.255Z,1513272158.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:38.637Z,1513272158.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:39.038Z,1513272159.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:39.415Z,1513272159.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:39.811Z,1513272159.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:40.237Z,1513272160.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:40.613Z,1513272160.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:41.036Z,1513272161.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:41.470Z,1513272161.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:41.844Z,1513272161.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:42.247Z,1513272162.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:42.617Z,1513272162.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:43.012Z,1513272163.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:43.416Z,1513272163.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:43.815Z,1513272163.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:44.224Z,1513272164.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:44.659Z,1513272164.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:45.036Z,1513272165.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:45.416Z,1513272165.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:45.815Z,1513272165.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:46.219Z,1513272166.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:46.623Z,1513272166.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:47.028Z,1513272167.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:47.426Z,1513272167.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:47.858Z,1513272167.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:48.220Z,1513272168.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:48.625Z,1513272168.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:49.017Z,1513272169.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:49.420Z,1513272169.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:49.823Z,1513272169.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:50.235Z,1513272170.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:53.660Z,1513272173.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:53.803Z,1513272173.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:54.219Z,1513272174.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:54.563Z,1513272174.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:54.977Z,1513272174.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:55.339Z,1513272175.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:55.774Z,1513272175.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:56.140Z,1513272176.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:56.537Z,1513272176.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:56.942Z,1513272176.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:57.336Z,1513272177.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:57.739Z,1513272177.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:58.136Z,1513272178.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:58.543Z,1513272178.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:58.942Z,1513272178.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:59.347Z,1513272179.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:22:59.747Z,1513272179.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:00.138Z,1513272180.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:00.579Z,1513272180.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:00.948Z,1513272180.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:01.343Z,1513272181.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:01.740Z,1513272181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:02.135Z,1513272182.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:02.540Z,1513272182.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:02.966Z,1513272182.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:03.348Z,1513272183.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:03.842Z,1513272183.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:04.140Z,1513272184.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:04.539Z,1513272184.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:04.945Z,1513272184.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:05.343Z,1513272185.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:05.744Z,1513272185.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:06.139Z,1513272186.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:06.548Z,1513272186.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:06.962Z,1513272186.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:07.329Z,1513272187.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:07.728Z,1513272187.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:08.153Z,1513272188.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:08.536Z,1513272188.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:08.943Z,1513272188.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:09.351Z,1513272189.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:09.745Z,1513272189.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:10.131Z,1513272190.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:10.539Z,1513272190.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:10.950Z,1513272190.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:11.352Z,1513272191.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:11.747Z,1513272191.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:12.209Z,1513272192.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:12.528Z,1513272192.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:12.955Z,1513272192.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:13.406Z,1513272193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:13.749Z,1513272193.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:14.127Z,1513272194.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:14.527Z,1513272194.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:14.953Z,1513272194.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:15.352Z,1513272195.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:15.762Z,1513272195.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:16.198Z,1513272196.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:16.576Z,1513272196.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:16.975Z,1513272196.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:17.340Z,1513272197.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:17.767Z,1513272197.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:18.138Z,1513272198.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:18.536Z,1513272198.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:18.942Z,1513272198.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:19.346Z,1513272199.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:19.791Z,1513272199.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:20.131Z,1513272200.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:20.535Z,1513272200.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:20.939Z,1513272200.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:21.336Z,1513272201.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:21.736Z,1513272201.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:22.147Z,1513272202.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:22.559Z,1513272202.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:23.027Z,1513272203.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:23.340Z,1513272203.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:23.735Z,1513272203.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:24.185Z,1513272204.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:24.533Z,1513272204.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:24.952Z,1513272204.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:25.347Z,1513272205.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:25.745Z,1513272205.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:26.175Z,1513272206.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:26.542Z,1513272206.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:26.951Z,1513272206.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:27.347Z,1513272207.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:27.746Z,1513272207.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.141Z,1513272208.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.541Z,1513272208.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.954Z,1513272208.954 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.954Z,1513272208.954 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 336
2017-12-14T17:23:28.954Z,1513272208.954 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:23:28.956Z,1513272208.956 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.956Z,1513272208.956 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 336
2017-12-14T17:23:28.956Z,1513272208.956 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:23:28.958Z,1513272208.958 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:28.958Z,1513272208.958 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 336
2017-12-14T17:23:28.958Z,1513272208.958 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:23:29.005Z,1513272209.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:23:29.005Z,1513272209.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:23:29.005Z,1513272209.005 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:23:29.490Z,1513272209.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:23:29.490Z,1513272209.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 336
2017-12-14T17:23:29.491Z,1513272209.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:23:29.491Z,1513272209.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 336
2017-12-14T17:23:29.491Z,1513272209.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:23:29.491Z,1513272209.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 336
2017-12-14T17:23:29.755Z,1513272209.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:23:29.755Z,1513272209.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:23:29.756Z,1513272209.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:23:29.756Z,1513272209.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:23:29.756Z,1513272209.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:23:29.757Z,1513272209.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:23:29.757Z,1513272209.757 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:23:29.758Z,1513272209.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:23:29.758Z,1513272209.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:23:30.133Z,1513272210.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:30.529Z,1513272210.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:30.954Z,1513272210.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:31.351Z,1513272211.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:31.753Z,1513272211.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:32.144Z,1513272212.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:32.547Z,1513272212.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:32.950Z,1513272212.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:33.347Z,1513272213.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:33.751Z,1513272213.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:34.152Z,1513272214.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:34.537Z,1513272214.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:34.941Z,1513272214.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:35.342Z,1513272215.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:35.783Z,1513272215.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:36.139Z,1513272216.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:36.541Z,1513272216.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:36.931Z,1513272216.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:37.335Z,1513272217.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:37.735Z,1513272217.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:38.102Z,1513272218.102 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:23:38.102Z,1513272218.102 [NAL9602] Data Fault, FailCount= 2
2017-12-14T17:23:38.102Z,1513272218.102 [NAL9602](ERROR): Data Fault
2017-12-14T17:23:38.204Z,1513272218.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:38.234Z,1513272218.234 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:23:38.490Z,1513272218.490 [NAL9602](INFO): Powering down
2017-12-14T17:23:38.539Z,1513272218.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:38.999Z,1513272218.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:39.336Z,1513272219.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:39.350Z,1513272219.350 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:23:39.350Z,1513272219.350 [NAL9602] No Fault, FailCount= 2
2017-12-14T17:23:39.760Z,1513272219.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:40.135Z,1513272220.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:40.538Z,1513272220.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:40.941Z,1513272220.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:41.336Z,1513272221.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:41.737Z,1513272221.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:42.234Z,1513272222.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:42.551Z,1513272222.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:42.951Z,1513272222.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:43.329Z,1513272223.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:43.727Z,1513272223.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:44.129Z,1513272224.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:44.531Z,1513272224.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:44.931Z,1513272224.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:45.327Z,1513272225.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:45.735Z,1513272225.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:46.130Z,1513272226.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:46.539Z,1513272226.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:46.935Z,1513272226.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:47.333Z,1513272227.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:47.735Z,1513272227.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:48.163Z,1513272228.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:48.579Z,1513272228.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:48.935Z,1513272228.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:49.333Z,1513272229.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:49.732Z,1513272229.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:50.139Z,1513272230.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:50.535Z,1513272230.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:53.938Z,1513272233.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:54.048Z,1513272234.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:54.442Z,1513272234.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:54.837Z,1513272234.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:55.246Z,1513272235.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:55.644Z,1513272235.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:56.040Z,1513272236.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:56.448Z,1513272236.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:56.842Z,1513272236.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:57.251Z,1513272237.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:57.643Z,1513272237.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:58.122Z,1513272238.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:58.449Z,1513272238.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:58.847Z,1513272238.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:59.243Z,1513272239.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:23:59.647Z,1513272239.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:00.106Z,1513272240.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:00.475Z,1513272240.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:00.850Z,1513272240.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:01.310Z,1513272241.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:01.654Z,1513272241.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:02.099Z,1513272242.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:02.451Z,1513272242.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:02.830Z,1513272242.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:03.233Z,1513272243.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:03.636Z,1513272243.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:04.072Z,1513272244.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:04.467Z,1513272244.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:04.838Z,1513272244.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:05.243Z,1513272245.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:05.636Z,1513272245.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:06.107Z,1513272246.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:06.449Z,1513272246.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:06.839Z,1513272246.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:07.240Z,1513272247.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:07.691Z,1513272247.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:08.044Z,1513272248.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:08.454Z,1513272248.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:08.796Z,1513272248.796 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:24:08.844Z,1513272248.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:09.231Z,1513272249.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:09.648Z,1513272249.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:10.053Z,1513272250.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:10.483Z,1513272250.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:10.863Z,1513272250.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:11.234Z,1513272251.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:11.634Z,1513272251.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:12.063Z,1513272252.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:12.438Z,1513272252.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:12.836Z,1513272252.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:13.235Z,1513272253.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:13.635Z,1513272253.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:14.121Z,1513272254.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:14.449Z,1513272254.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:14.839Z,1513272254.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:15.232Z,1513272255.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:15.635Z,1513272255.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:16.076Z,1513272256.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:16.442Z,1513272256.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:16.842Z,1513272256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:17.295Z,1513272257.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:17.640Z,1513272257.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:18.078Z,1513272258.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:18.446Z,1513272258.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:18.842Z,1513272258.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:19.240Z,1513272259.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:19.640Z,1513272259.640 [PNI_TCM](ERROR): CRC does not match. Expected:0x37479 got:0x30036
2017-12-14T17:24:19.667Z,1513272259.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:20.039Z,1513272260.039 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:24:20.099Z,1513272260.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:20.483Z,1513272260.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:20.861Z,1513272260.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:21.250Z,1513272261.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:21.657Z,1513272261.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:22.042Z,1513272262.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:22.507Z,1513272262.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:22.847Z,1513272262.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:23.279Z,1513272263.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:23.675Z,1513272263.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:24.099Z,1513272264.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:24.454Z,1513272264.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:24.850Z,1513272264.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:25.243Z,1513272265.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:25.635Z,1513272265.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:26.078Z,1513272266.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:26.454Z,1513272266.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:26.907Z,1513272266.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:27.235Z,1513272267.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:27.632Z,1513272267.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:28.070Z,1513272268.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:28.440Z,1513272268.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:28.838Z,1513272268.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:29.239Z,1513272269.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:29.660Z,1513272269.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:30.112Z,1513272270.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:30.439Z,1513272270.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:30.837Z,1513272270.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:31.237Z,1513272271.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:31.632Z,1513272271.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:32.071Z,1513272272.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:32.471Z,1513272272.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:32.844Z,1513272272.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:33.269Z,1513272273.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:33.651Z,1513272273.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:34.113Z,1513272274.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:34.447Z,1513272274.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:34.854Z,1513272274.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:35.251Z,1513272275.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:35.654Z,1513272275.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:36.050Z,1513272276.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:36.484Z,1513272276.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:36.843Z,1513272276.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:37.286Z,1513272277.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:37.647Z,1513272277.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:38.047Z,1513272278.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:38.447Z,1513272278.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:38.855Z,1513272278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:39.255Z,1513272279.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:39.676Z,1513272279.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:40.061Z,1513272280.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:40.442Z,1513272280.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:40.839Z,1513272280.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:41.263Z,1513272281.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:41.647Z,1513272281.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:42.067Z,1513272282.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:42.444Z,1513272282.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:42.895Z,1513272282.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:43.240Z,1513272283.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:43.617Z,1513272283.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x17500 got:0x32080
2017-12-14T17:24:43.648Z,1513272283.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:44.103Z,1513272284.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:44.451Z,1513272284.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:44.851Z,1513272284.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:45.292Z,1513272285.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:45.645Z,1513272285.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:46.159Z,1513272286.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:46.452Z,1513272286.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:46.850Z,1513272286.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:47.252Z,1513272287.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:47.651Z,1513272287.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:48.110Z,1513272288.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:48.438Z,1513272288.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:48.841Z,1513272288.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:49.299Z,1513272289.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:49.645Z,1513272289.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:50.023Z,1513272290.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:50.459Z,1513272290.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:50.852Z,1513272290.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:54.449Z,1513272294.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:54.552Z,1513272294.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:54.924Z,1513272294.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:55.324Z,1513272295.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:55.752Z,1513272295.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:56.125Z,1513272296.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:56.529Z,1513272296.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:56.924Z,1513272296.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:57.322Z,1513272297.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:57.722Z,1513272297.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:58.118Z,1513272298.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:58.523Z,1513272298.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:58.967Z,1513272298.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:59.327Z,1513272299.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:24:59.728Z,1513272299.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:00.134Z,1513272300.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:00.527Z,1513272300.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:00.927Z,1513272300.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:01.323Z,1513272301.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:01.718Z,1513272301.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:02.191Z,1513272302.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:02.540Z,1513272302.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:02.943Z,1513272302.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:03.323Z,1513272303.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:03.720Z,1513272303.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:04.132Z,1513272304.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:04.532Z,1513272304.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:04.924Z,1513272304.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:05.346Z,1513272305.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:05.769Z,1513272305.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:06.136Z,1513272306.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:06.563Z,1513272306.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:06.934Z,1513272306.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:07.343Z,1513272307.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:07.738Z,1513272307.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:08.153Z,1513272308.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:08.553Z,1513272308.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:08.932Z,1513272308.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:09.323Z,1513272309.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:09.723Z,1513272309.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:10.128Z,1513272310.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:10.530Z,1513272310.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:10.923Z,1513272310.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:11.338Z,1513272311.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:11.811Z,1513272311.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:12.139Z,1513272312.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:12.520Z,1513272312.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:12.932Z,1513272312.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:13.326Z,1513272313.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:13.728Z,1513272313.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:14.133Z,1513272314.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:14.533Z,1513272314.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:14.984Z,1513272314.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:15.324Z,1513272315.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:15.727Z,1513272315.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:16.120Z,1513272316.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:16.548Z,1513272316.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:16.926Z,1513272316.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:17.336Z,1513272317.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:17.740Z,1513272317.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:18.160Z,1513272318.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:18.535Z,1513272318.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:18.929Z,1513272318.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:19.311Z,1513272319.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:19.712Z,1513272319.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:20.140Z,1513272320.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:20.538Z,1513272320.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:20.939Z,1513272320.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:21.316Z,1513272321.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:21.742Z,1513272321.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:22.137Z,1513272322.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:22.521Z,1513272322.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:22.921Z,1513272322.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:23.347Z,1513272323.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:23.741Z,1513272323.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:24.127Z,1513272324.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:24.560Z,1513272324.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:24.921Z,1513272324.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:25.330Z,1513272325.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:25.762Z,1513272325.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:26.128Z,1513272326.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:26.528Z,1513272326.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:26.928Z,1513272326.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:27.372Z,1513272327.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:27.759Z,1513272327.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:28.123Z,1513272328.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:28.564Z,1513272328.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:28.931Z,1513272328.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:29.335Z,1513272329.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:29.766Z,1513272329.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:30.135Z,1513272330.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:30.548Z,1513272330.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:30.945Z,1513272330.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:31.329Z,1513272331.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:31.736Z,1513272331.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:32.138Z,1513272332.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:32.551Z,1513272332.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:32.943Z,1513272332.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:33.338Z,1513272333.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:33.711Z,1513272333.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:34.182Z,1513272334.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:34.536Z,1513272334.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:34.916Z,1513272334.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:35.338Z,1513272335.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:35.743Z,1513272335.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:36.140Z,1513272336.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:36.516Z,1513272336.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:36.915Z,1513272336.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:37.315Z,1513272337.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:37.723Z,1513272337.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:38.145Z,1513272338.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:38.587Z,1513272338.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:38.944Z,1513272338.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:39.314Z,1513272339.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:39.714Z,1513272339.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:40.144Z,1513272340.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:40.571Z,1513272340.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:40.943Z,1513272340.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:41.349Z,1513272341.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:41.746Z,1513272341.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:42.120Z,1513272342.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:42.523Z,1513272342.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:42.926Z,1513272342.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:43.316Z,1513272343.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:43.771Z,1513272343.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:44.144Z,1513272344.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:44.532Z,1513272344.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:44.936Z,1513272344.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:45.327Z,1513272345.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:45.727Z,1513272345.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:46.127Z,1513272346.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:46.523Z,1513272346.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:46.966Z,1513272346.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:47.332Z,1513272347.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:47.737Z,1513272347.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:48.131Z,1513272348.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:48.531Z,1513272348.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:48.918Z,1513272348.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:49.352Z,1513272349.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:49.715Z,1513272349.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:50.215Z,1513272350.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:50.551Z,1513272350.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:50.942Z,1513272350.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:54.507Z,1513272354.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:54.639Z,1513272354.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:55.038Z,1513272355.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:55.402Z,1513272355.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:55.794Z,1513272355.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:56.192Z,1513272356.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:56.638Z,1513272356.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:56.989Z,1513272356.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:57.404Z,1513272357.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:57.798Z,1513272357.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:58.189Z,1513272358.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:58.594Z,1513272358.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:58.983Z,1513272358.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:59.385Z,1513272359.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:25:59.793Z,1513272359.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:00.195Z,1513272360.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:00.599Z,1513272360.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:00.994Z,1513272360.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:01.391Z,1513272361.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:01.794Z,1513272361.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:02.191Z,1513272362.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:02.590Z,1513272362.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:03.068Z,1513272363.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:03.395Z,1513272363.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:03.831Z,1513272363.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:04.195Z,1513272364.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:04.589Z,1513272364.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:04.992Z,1513272364.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:05.392Z,1513272365.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:05.779Z,1513272365.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:06.234Z,1513272366.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:06.596Z,1513272366.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:07.003Z,1513272367.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:07.371Z,1513272367.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:07.770Z,1513272367.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:08.199Z,1513272368.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:08.574Z,1513272368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:08.978Z,1513272368.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:09.431Z,1513272369.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:09.808Z,1513272369.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:10.235Z,1513272370.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:10.587Z,1513272370.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:10.980Z,1513272370.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:11.381Z,1513272371.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:11.777Z,1513272371.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:12.185Z,1513272372.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:12.658Z,1513272372.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:12.984Z,1513272372.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:13.380Z,1513272373.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:13.782Z,1513272373.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:14.210Z,1513272374.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:14.583Z,1513272374.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:15.015Z,1513272375.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:15.395Z,1513272375.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:15.922Z,1513272375.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:16.223Z,1513272376.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:16.615Z,1513272376.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:16.981Z,1513272376.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:17.387Z,1513272377.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:17.818Z,1513272377.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:18.242Z,1513272378.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:18.636Z,1513272378.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:19.066Z,1513272379.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:19.384Z,1513272379.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:19.812Z,1513272379.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:20.277Z,1513272380.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:20.599Z,1513272380.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:20.992Z,1513272380.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:21.405Z,1513272381.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:21.839Z,1513272381.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:22.200Z,1513272382.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:22.603Z,1513272382.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:23.008Z,1513272383.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:23.394Z,1513272383.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:23.799Z,1513272383.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:24.215Z,1513272384.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:24.611Z,1513272384.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:25.031Z,1513272385.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:25.393Z,1513272385.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:25.807Z,1513272385.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:26.172Z,1513272386.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:26.575Z,1513272386.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:26.976Z,1513272386.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:27.457Z,1513272387.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:27.819Z,1513272387.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:28.208Z,1513272388.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:28.626Z,1513272388.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:28.999Z,1513272388.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:29.397Z,1513272389.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:29.802Z,1513272389.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:29.802Z,1513272389.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 337
2017-12-14T17:26:29.802Z,1513272389.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:26:29.830Z,1513272389.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:29.830Z,1513272389.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 337
2017-12-14T17:26:29.830Z,1513272389.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:26:29.832Z,1513272389.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:29.832Z,1513272389.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 337
2017-12-14T17:26:29.832Z,1513272389.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:26:29.894Z,1513272389.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:26:29.894Z,1513272389.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:26:29.894Z,1513272389.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:26:30.380Z,1513272390.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:26:30.380Z,1513272390.380 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 337
2017-12-14T17:26:30.380Z,1513272390.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:26:30.380Z,1513272390.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 337
2017-12-14T17:26:30.393Z,1513272390.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:26:30.393Z,1513272390.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 337
2017-12-14T17:26:30.634Z,1513272390.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:26:30.635Z,1513272390.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:26:30.635Z,1513272390.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:26:30.635Z,1513272390.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:26:30.636Z,1513272390.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:26:30.636Z,1513272390.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:26:30.636Z,1513272390.636 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:26:30.645Z,1513272390.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:26:30.646Z,1513272390.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:26:30.995Z,1513272390.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:31.404Z,1513272391.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:31.808Z,1513272391.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:32.210Z,1513272392.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:32.595Z,1513272392.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:33.003Z,1513272393.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:33.412Z,1513272393.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:33.848Z,1513272393.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:34.246Z,1513272394.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:34.600Z,1513272394.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:34.995Z,1513272394.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:35.402Z,1513272395.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:35.791Z,1513272395.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:36.247Z,1513272396.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:36.615Z,1513272396.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:37.062Z,1513272397.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:37.392Z,1513272397.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:37.792Z,1513272397.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:38.235Z,1513272398.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:38.599Z,1513272398.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:39.031Z,1513272399.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:39.399Z,1513272399.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:39.803Z,1513272399.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:40.199Z,1513272400.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:40.602Z,1513272400.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:40.983Z,1513272400.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:41.383Z,1513272401.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:41.824Z,1513272401.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:42.199Z,1513272402.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:42.612Z,1513272402.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:43.016Z,1513272403.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:43.439Z,1513272403.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:43.804Z,1513272403.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:44.214Z,1513272404.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:44.617Z,1513272404.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:45.001Z,1513272405.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:45.424Z,1513272405.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:45.799Z,1513272405.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:46.195Z,1513272406.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:46.627Z,1513272406.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:46.996Z,1513272406.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:47.431Z,1513272407.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:47.795Z,1513272407.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:48.191Z,1513272408.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:48.594Z,1513272408.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:48.995Z,1513272408.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:49.382Z,1513272409.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:49.781Z,1513272409.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:49.784Z,1513272409.784 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:26:49.785Z,1513272409.785 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:26:49.785Z,1513272409.785 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:26:49.785Z,1513272409.785 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:26:50.191Z,1513272410.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:50.194Z,1513272410.194 [Default:CheckIn:D] Stopped
2017-12-14T17:26:50.194Z,1513272410.194 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:26:50.585Z,1513272410.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:50.588Z,1513272410.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1013.580078 min 
2017-12-14T17:26:50.588Z,1513272410.588 [Default:CheckIn:E] Stopped
2017-12-14T17:26:50.588Z,1513272410.588 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn] Stopped
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn](INFO): Running loop #98
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn] Running Loop=98
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:26:50.589Z,1513272410.589 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:26:50.986Z,1513272410.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:54.633Z,1513272414.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:54.795Z,1513272414.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:55.143Z,1513272415.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:55.534Z,1513272415.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:55.926Z,1513272415.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:56.411Z,1513272416.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:56.718Z,1513272416.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:57.144Z,1513272417.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:57.551Z,1513272417.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:58.016Z,1513272418.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:58.451Z,1513272418.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:58.789Z,1513272418.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:59.156Z,1513272419.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:26:59.535Z,1513272419.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:00.010Z,1513272420.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:00.323Z,1513272420.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:00.768Z,1513272420.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:01.160Z,1513272421.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:01.523Z,1513272421.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:01.931Z,1513272421.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:02.333Z,1513272422.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:02.734Z,1513272422.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:03.254Z,1513272423.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:03.540Z,1513272423.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:04.003Z,1513272424.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:04.354Z,1513272424.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:04.748Z,1513272424.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:05.150Z,1513272425.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:05.533Z,1513272425.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:05.926Z,1513272425.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:06.338Z,1513272426.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:06.748Z,1513272426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:07.196Z,1513272427.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:07.547Z,1513272427.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:07.924Z,1513272427.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:08.330Z,1513272428.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:08.720Z,1513272428.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:09.168Z,1513272429.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:09.549Z,1513272429.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:09.951Z,1513272429.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:10.392Z,1513272430.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:10.812Z,1513272430.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:11.135Z,1513272431.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:11.533Z,1513272431.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:11.933Z,1513272431.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:12.398Z,1513272432.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:12.747Z,1513272432.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:13.140Z,1513272433.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:13.513Z,1513272433.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:14.027Z,1513272434.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:14.335Z,1513272434.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:14.757Z,1513272434.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:15.136Z,1513272435.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:15.536Z,1513272435.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:15.984Z,1513272435.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:16.324Z,1513272436.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:16.731Z,1513272436.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:17.126Z,1513272437.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:17.531Z,1513272437.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:17.929Z,1513272437.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:18.352Z,1513272438.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:18.732Z,1513272438.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:19.136Z,1513272439.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:19.527Z,1513272439.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:20.018Z,1513272440.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:20.352Z,1513272440.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:20.735Z,1513272440.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:21.187Z,1513272441.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:21.547Z,1513272441.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:21.963Z,1513272441.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:22.327Z,1513272442.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:22.758Z,1513272442.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:23.127Z,1513272443.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:23.570Z,1513272443.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:23.924Z,1513272443.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:24.418Z,1513272444.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:24.737Z,1513272444.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:25.137Z,1513272445.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:25.530Z,1513272445.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:25.928Z,1513272445.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:26.388Z,1513272446.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:26.803Z,1513272446.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:27.136Z,1513272447.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:27.552Z,1513272447.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:28.026Z,1513272448.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:28.331Z,1513272448.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:28.739Z,1513272448.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:29.133Z,1513272449.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:29.524Z,1513272449.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:29.992Z,1513272449.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:30.323Z,1513272450.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:30.794Z,1513272450.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:31.152Z,1513272451.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:31.519Z,1513272451.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:31.990Z,1513272451.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:32.326Z,1513272452.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:32.728Z,1513272452.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:33.136Z,1513272453.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:33.543Z,1513272453.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:34.015Z,1513272454.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:34.343Z,1513272454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:34.724Z,1513272454.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:35.127Z,1513272455.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:35.530Z,1513272455.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:35.925Z,1513272455.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:36.406Z,1513272456.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:36.735Z,1513272456.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:37.144Z,1513272457.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:37.543Z,1513272457.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:37.938Z,1513272457.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:38.408Z,1513272458.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:38.743Z,1513272458.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:39.144Z,1513272459.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:39.568Z,1513272459.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:39.953Z,1513272459.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:40.400Z,1513272460.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:40.726Z,1513272460.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:41.128Z,1513272461.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:41.535Z,1513272461.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:42.011Z,1513272462.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:42.347Z,1513272462.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:42.791Z,1513272462.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:43.174Z,1513272463.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:43.519Z,1513272463.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:44.016Z,1513272464.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:44.324Z,1513272464.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:44.756Z,1513272464.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:45.153Z,1513272465.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:45.536Z,1513272465.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:46.011Z,1513272466.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:46.319Z,1513272466.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:46.719Z,1513272466.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:47.121Z,1513272467.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:47.516Z,1513272467.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:47.918Z,1513272467.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:48.333Z,1513272468.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:48.738Z,1513272468.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:49.136Z,1513272469.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:49.530Z,1513272469.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:49.943Z,1513272469.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:50.325Z,1513272470.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:50.720Z,1513272470.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:51.148Z,1513272471.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:54.664Z,1513272474.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:54.815Z,1513272474.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:55.208Z,1513272475.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:55.530Z,1513272475.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:55.954Z,1513272475.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:56.354Z,1513272476.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:56.760Z,1513272476.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:57.159Z,1513272477.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:57.551Z,1513272477.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:57.965Z,1513272477.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:58.335Z,1513272478.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:58.737Z,1513272478.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:59.144Z,1513272479.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:27:59.558Z,1513272479.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:00.024Z,1513272480.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:00.336Z,1513272480.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:00.736Z,1513272480.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:01.149Z,1513272481.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:01.546Z,1513272481.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:02.032Z,1513272482.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:02.368Z,1513272482.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:02.756Z,1513272482.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:03.155Z,1513272483.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:03.539Z,1513272483.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:03.955Z,1513272483.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:04.344Z,1513272484.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:04.740Z,1513272484.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:05.166Z,1513272485.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:05.574Z,1513272485.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:05.954Z,1513272485.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:06.399Z,1513272486.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:06.795Z,1513272486.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:07.136Z,1513272487.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:07.536Z,1513272487.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:07.971Z,1513272487.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:08.413Z,1513272488.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:08.838Z,1513272488.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:09.151Z,1513272489.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:09.542Z,1513272489.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:10.014Z,1513272490.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:10.354Z,1513272490.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:10.751Z,1513272490.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:11.164Z,1513272491.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:11.560Z,1513272491.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:12.040Z,1513272492.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:12.352Z,1513272492.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:12.736Z,1513272492.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:13.135Z,1513272493.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:13.542Z,1513272493.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:14.011Z,1513272494.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:14.357Z,1513272494.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:14.758Z,1513272494.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:15.169Z,1513272495.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:15.541Z,1513272495.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:16.032Z,1513272496.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:16.339Z,1513272496.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:16.744Z,1513272496.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:17.174Z,1513272497.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:17.546Z,1513272497.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:17.943Z,1513272497.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:18.384Z,1513272498.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:18.747Z,1513272498.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:19.146Z,1513272499.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:19.548Z,1513272499.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:19.944Z,1513272499.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:20.417Z,1513272500.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:20.760Z,1513272500.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:21.163Z,1513272501.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:21.538Z,1513272501.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:21.940Z,1513272501.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:22.394Z,1513272502.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:22.739Z,1513272502.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:23.148Z,1513272503.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:23.549Z,1513272503.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:24.039Z,1513272504.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:24.336Z,1513272504.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:24.806Z,1513272504.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:25.145Z,1513272505.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:25.548Z,1513272505.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:26.024Z,1513272506.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:26.343Z,1513272506.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:26.740Z,1513272506.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:27.143Z,1513272507.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:27.543Z,1513272507.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:28.018Z,1513272508.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:28.340Z,1513272508.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:28.767Z,1513272508.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:29.151Z,1513272509.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:29.602Z,1513272509.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:30.038Z,1513272510.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:30.358Z,1513272510.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:30.767Z,1513272510.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:31.133Z,1513272511.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:31.586Z,1513272511.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:31.939Z,1513272511.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:32.345Z,1513272512.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:32.752Z,1513272512.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:33.147Z,1513272513.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:33.534Z,1513272513.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:33.939Z,1513272513.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:34.404Z,1513272514.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:34.734Z,1513272514.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:35.167Z,1513272515.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:35.559Z,1513272515.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:35.960Z,1513272515.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:36.416Z,1513272516.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:36.735Z,1513272516.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:37.134Z,1513272517.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:37.539Z,1513272517.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:37.998Z,1513272517.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:38.387Z,1513272518.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:38.752Z,1513272518.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:39.144Z,1513272519.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:39.542Z,1513272519.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:40.035Z,1513272520.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:40.355Z,1513272520.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:40.733Z,1513272520.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:41.163Z,1513272521.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:41.583Z,1513272521.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:42.029Z,1513272522.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:42.332Z,1513272522.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:42.737Z,1513272522.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:43.143Z,1513272523.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:43.532Z,1513272523.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:44.026Z,1513272524.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:44.349Z,1513272524.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:44.802Z,1513272524.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:45.152Z,1513272525.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:45.539Z,1513272525.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:45.938Z,1513272525.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:46.346Z,1513272526.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:46.744Z,1513272526.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:47.151Z,1513272527.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:47.563Z,1513272527.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:48.020Z,1513272528.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:48.428Z,1513272528.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:48.733Z,1513272528.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:49.140Z,1513272529.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:49.542Z,1513272529.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:49.945Z,1513272529.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:50.407Z,1513272530.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:50.752Z,1513272530.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:51.195Z,1513272531.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:54.763Z,1513272534.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:54.899Z,1513272534.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:55.288Z,1513272535.288 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:28:55.288Z,1513272535.288 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:28:55.288Z,1513272535.288 [BPC1](ERROR): Communications Fault
2017-12-14T17:28:55.296Z,1513272535.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:55.309Z,1513272535.309 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:28:55.715Z,1513272535.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:56.107Z,1513272536.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:56.492Z,1513272536.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:56.506Z,1513272536.506 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:28:56.506Z,1513272536.506 [BPC1] No Fault, FailCount= 1
2017-12-14T17:28:56.947Z,1513272536.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:57.284Z,1513272537.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:57.712Z,1513272537.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:58.108Z,1513272538.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:58.507Z,1513272538.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:58.915Z,1513272538.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:59.283Z,1513272539.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:28:59.683Z,1513272539.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:00.136Z,1513272540.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:00.491Z,1513272540.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:00.895Z,1513272540.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:01.292Z,1513272541.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:01.687Z,1513272541.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:02.098Z,1513272542.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:02.503Z,1513272542.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:02.898Z,1513272542.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:03.295Z,1513272543.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:03.684Z,1513272543.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:04.098Z,1513272544.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:04.496Z,1513272544.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:04.897Z,1513272544.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:05.312Z,1513272545.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:05.695Z,1513272545.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:06.099Z,1513272546.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:06.503Z,1513272546.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:06.903Z,1513272546.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:07.300Z,1513272547.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:07.691Z,1513272547.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:08.094Z,1513272548.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:08.506Z,1513272548.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:08.898Z,1513272548.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:09.289Z,1513272549.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:09.684Z,1513272549.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:10.162Z,1513272550.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:10.500Z,1513272550.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:10.892Z,1513272550.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:11.290Z,1513272551.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:11.688Z,1513272551.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:12.107Z,1513272552.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:12.511Z,1513272552.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:12.897Z,1513272552.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:13.313Z,1513272553.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:13.695Z,1513272553.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:14.108Z,1513272554.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:14.509Z,1513272554.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:14.903Z,1513272554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:15.303Z,1513272555.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:15.704Z,1513272555.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:16.121Z,1513272556.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:16.555Z,1513272556.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:16.903Z,1513272556.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:17.325Z,1513272557.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:17.719Z,1513272557.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:18.107Z,1513272558.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:18.523Z,1513272558.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:18.907Z,1513272558.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:19.298Z,1513272559.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:19.764Z,1513272559.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:20.107Z,1513272560.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:20.502Z,1513272560.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:20.902Z,1513272560.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:21.304Z,1513272561.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:21.679Z,1513272561.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:22.116Z,1513272562.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:22.501Z,1513272562.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:22.951Z,1513272562.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:23.280Z,1513272563.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:23.676Z,1513272563.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:24.092Z,1513272564.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:24.489Z,1513272564.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:24.891Z,1513272564.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:25.296Z,1513272565.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:25.691Z,1513272565.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:26.147Z,1513272566.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:26.481Z,1513272566.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:26.916Z,1513272566.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:27.210Z,1513272567.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:27.288Z,1513272567.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:27.687Z,1513272567.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:28.007Z,1513272568.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:28.135Z,1513272568.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:28.511Z,1513272568.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:28.541Z,1513272568.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:28.911Z,1513272568.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:28.925Z,1513272568.925 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:29:29.338Z,1513272569.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:29.351Z,1513272569.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:29.697Z,1513272569.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.107Z,1513272570.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.150Z,1513272570.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:30.500Z,1513272570.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.746Z,1513272570.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:30.911Z,1513272570.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.911Z,1513272570.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 338
2017-12-14T17:29:30.911Z,1513272570.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:29:30.913Z,1513272570.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.913Z,1513272570.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 338
2017-12-14T17:29:30.913Z,1513272570.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:29:30.915Z,1513272570.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:30.915Z,1513272570.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 338
2017-12-14T17:29:30.915Z,1513272570.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:29:30.927Z,1513272570.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:29:30.928Z,1513272570.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:29:30.928Z,1513272570.928 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:29:31.304Z,1513272571.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:29:31.304Z,1513272571.304 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 338
2017-12-14T17:29:31.304Z,1513272571.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:29:31.304Z,1513272571.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 338
2017-12-14T17:29:31.309Z,1513272571.309 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:29:31.309Z,1513272571.309 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 338
2017-12-14T17:29:31.683Z,1513272571.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:29:31.683Z,1513272571.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:29:31.684Z,1513272571.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:29:31.684Z,1513272571.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:29:31.684Z,1513272571.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:29:31.685Z,1513272571.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:29:31.696Z,1513272571.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:29:31.696Z,1513272571.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:29:31.696Z,1513272571.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:29:32.096Z,1513272572.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:32.515Z,1513272572.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:32.903Z,1513272572.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:33.302Z,1513272573.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:33.703Z,1513272573.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:34.103Z,1513272574.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:34.501Z,1513272574.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:34.907Z,1513272574.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:35.305Z,1513272575.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:35.713Z,1513272575.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:36.152Z,1513272576.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:36.519Z,1513272576.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:36.903Z,1513272576.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:37.287Z,1513272577.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:37.727Z,1513272577.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:38.086Z,1513272578.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:38.490Z,1513272578.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:38.956Z,1513272578.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:39.300Z,1513272579.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:39.687Z,1513272579.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:40.140Z,1513272580.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:40.489Z,1513272580.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:40.925Z,1513272580.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:41.299Z,1513272581.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:41.691Z,1513272581.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:42.107Z,1513272582.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:42.509Z,1513272582.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:42.900Z,1513272582.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:43.284Z,1513272583.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:43.684Z,1513272583.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:44.103Z,1513272584.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:44.503Z,1513272584.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:44.902Z,1513272584.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:45.291Z,1513272585.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:45.542Z,1513272585.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:45.684Z,1513272585.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:46.097Z,1513272586.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:46.338Z,1513272586.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:46.507Z,1513272586.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:46.745Z,1513272586.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:46.900Z,1513272586.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:47.290Z,1513272587.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:47.689Z,1513272587.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:48.095Z,1513272588.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:48.501Z,1513272588.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:48.893Z,1513272588.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:49.303Z,1513272589.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:49.689Z,1513272589.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:50.115Z,1513272590.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:50.504Z,1513272590.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:50.903Z,1513272590.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:51.299Z,1513272591.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:54.763Z,1513272594.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:54.899Z,1513272594.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:55.271Z,1513272595.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:55.676Z,1513272595.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:56.107Z,1513272596.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:56.462Z,1513272596.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:56.875Z,1513272596.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:57.272Z,1513272597.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:57.676Z,1513272597.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:58.071Z,1513272598.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:58.471Z,1513272598.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:58.871Z,1513272598.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:59.271Z,1513272599.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:29:59.546Z,1513272599.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:29:59.698Z,1513272599.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:00.080Z,1513272600.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:00.343Z,1513272600.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:00.473Z,1513272600.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:00.753Z,1513272600.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:00.878Z,1513272600.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:01.379Z,1513272601.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:01.662Z,1513272601.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:02.099Z,1513272602.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:02.485Z,1513272602.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:02.895Z,1513272602.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:03.260Z,1513272603.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:03.683Z,1513272603.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:04.068Z,1513272604.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:04.503Z,1513272604.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:04.893Z,1513272604.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:05.260Z,1513272605.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:05.659Z,1513272605.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:06.091Z,1513272606.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:06.494Z,1513272606.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:06.872Z,1513272606.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:07.263Z,1513272607.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:07.704Z,1513272607.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:08.072Z,1513272608.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:08.480Z,1513272608.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:08.872Z,1513272608.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:09.271Z,1513272609.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:09.664Z,1513272609.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:10.131Z,1513272610.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:10.495Z,1513272610.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:10.899Z,1513272610.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:11.304Z,1513272611.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:11.663Z,1513272611.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:12.092Z,1513272612.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:12.466Z,1513272612.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:12.891Z,1513272612.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:13.261Z,1513272613.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:13.546Z,1513272613.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:13.664Z,1513272613.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:14.095Z,1513272614.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:14.342Z,1513272614.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:14.498Z,1513272614.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:14.749Z,1513272614.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:14.874Z,1513272614.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:15.262Z,1513272615.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:15.546Z,1513272615.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:15.662Z,1513272615.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:16.080Z,1513272616.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:16.343Z,1513272616.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:16.468Z,1513272616.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:16.745Z,1513272616.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:30:16.915Z,1513272616.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:17.342Z,1513272617.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:17.667Z,1513272617.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:18.088Z,1513272618.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:18.474Z,1513272618.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:18.876Z,1513272618.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:19.269Z,1513272619.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:19.675Z,1513272619.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:20.068Z,1513272620.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:20.483Z,1513272620.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:20.878Z,1513272620.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:21.271Z,1513272621.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:21.656Z,1513272621.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:22.099Z,1513272622.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:22.476Z,1513272622.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:22.908Z,1513272622.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:23.258Z,1513272623.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:23.736Z,1513272623.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:24.107Z,1513272624.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:24.507Z,1513272624.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:24.864Z,1513272624.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:25.262Z,1513272625.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:25.663Z,1513272625.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:26.065Z,1513272626.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:26.472Z,1513272626.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:26.942Z,1513272626.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:27.261Z,1513272627.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:27.663Z,1513272627.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:28.071Z,1513272628.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:28.470Z,1513272628.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:28.894Z,1513272628.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:29.434Z,1513272629.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:29.667Z,1513272629.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:30.070Z,1513272630.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:30.500Z,1513272630.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:30.894Z,1513272630.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:31.268Z,1513272631.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:31.668Z,1513272631.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:32.068Z,1513272632.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:32.474Z,1513272632.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:32.906Z,1513272632.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:33.324Z,1513272633.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:33.672Z,1513272633.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:34.079Z,1513272634.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:34.497Z,1513272634.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:34.877Z,1513272634.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:35.268Z,1513272635.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:35.664Z,1513272635.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:36.067Z,1513272636.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:36.528Z,1513272636.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:36.877Z,1513272636.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:37.264Z,1513272637.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:37.666Z,1513272637.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:38.111Z,1513272638.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:38.473Z,1513272638.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:38.883Z,1513272638.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:39.275Z,1513272639.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:39.726Z,1513272639.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:40.083Z,1513272640.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:40.485Z,1513272640.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:40.880Z,1513272640.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:41.257Z,1513272641.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:41.660Z,1513272641.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:42.085Z,1513272642.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:42.487Z,1513272642.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:42.933Z,1513272642.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:43.286Z,1513272643.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:43.666Z,1513272643.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:44.100Z,1513272644.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:44.491Z,1513272644.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:44.882Z,1513272644.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:45.298Z,1513272645.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:45.678Z,1513272645.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:46.155Z,1513272646.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:46.491Z,1513272646.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:46.915Z,1513272646.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:47.271Z,1513272647.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:47.665Z,1513272647.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:48.085Z,1513272648.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:48.469Z,1513272648.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:48.872Z,1513272648.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:49.326Z,1513272649.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:49.671Z,1513272649.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:50.074Z,1513272650.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:50.479Z,1513272650.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:50.881Z,1513272650.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:51.298Z,1513272651.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:51.658Z,1513272651.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:55.164Z,1513272655.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:55.286Z,1513272655.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:55.712Z,1513272655.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:56.093Z,1513272656.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:56.463Z,1513272656.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:56.859Z,1513272656.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:57.260Z,1513272657.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:57.660Z,1513272657.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:58.068Z,1513272658.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:58.465Z,1513272658.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:58.898Z,1513272658.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:59.267Z,1513272659.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:30:59.660Z,1513272659.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:00.063Z,1513272660.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:00.465Z,1513272660.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:00.872Z,1513272660.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:01.259Z,1513272661.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:01.661Z,1513272661.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:02.089Z,1513272662.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:02.468Z,1513272662.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:02.865Z,1513272662.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:03.268Z,1513272663.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:03.663Z,1513272663.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:04.064Z,1513272664.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:04.465Z,1513272664.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:04.864Z,1513272664.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:05.337Z,1513272665.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:05.704Z,1513272665.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:06.108Z,1513272666.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:06.468Z,1513272666.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:06.914Z,1513272666.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:07.275Z,1513272667.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:07.690Z,1513272667.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:08.068Z,1513272668.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:08.551Z,1513272668.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:08.868Z,1513272668.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:09.264Z,1513272669.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:09.671Z,1513272669.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:10.075Z,1513272670.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:10.497Z,1513272670.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:10.868Z,1513272670.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:11.262Z,1513272671.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:11.697Z,1513272671.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:12.083Z,1513272672.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:12.491Z,1513272672.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:12.878Z,1513272672.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:13.267Z,1513272673.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:13.675Z,1513272673.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:14.083Z,1513272674.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:14.482Z,1513272674.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:14.924Z,1513272674.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:15.312Z,1513272675.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:15.660Z,1513272675.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:16.111Z,1513272676.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:16.475Z,1513272676.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:16.915Z,1513272676.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:17.313Z,1513272677.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:17.690Z,1513272677.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:18.139Z,1513272678.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:18.487Z,1513272678.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:18.852Z,1513272678.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:19.288Z,1513272679.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:19.730Z,1513272679.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:20.096Z,1513272680.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:20.502Z,1513272680.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:20.870Z,1513272680.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:21.325Z,1513272681.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:21.683Z,1513272681.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:22.100Z,1513272682.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:22.468Z,1513272682.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:22.902Z,1513272682.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:23.272Z,1513272683.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:23.702Z,1513272683.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:24.083Z,1513272684.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:24.511Z,1513272684.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:24.976Z,1513272684.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:25.263Z,1513272685.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:25.667Z,1513272685.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:26.095Z,1513272686.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:26.477Z,1513272686.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:26.910Z,1513272686.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:27.304Z,1513272687.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:27.690Z,1513272687.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:28.181Z,1513272688.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:28.487Z,1513272688.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:28.919Z,1513272688.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:29.324Z,1513272689.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:29.707Z,1513272689.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:30.107Z,1513272690.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:30.564Z,1513272690.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:30.899Z,1513272690.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:31.295Z,1513272691.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:31.688Z,1513272691.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:32.104Z,1513272692.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:32.467Z,1513272692.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:32.899Z,1513272692.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:33.276Z,1513272693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:33.668Z,1513272693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:34.115Z,1513272694.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:34.487Z,1513272694.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:34.918Z,1513272694.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:35.298Z,1513272695.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:35.698Z,1513272695.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:36.083Z,1513272696.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:36.488Z,1513272696.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:36.895Z,1513272696.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:37.287Z,1513272697.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:37.707Z,1513272697.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:38.096Z,1513272698.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:38.504Z,1513272698.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:38.941Z,1513272698.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:39.314Z,1513272699.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:39.694Z,1513272699.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:40.150Z,1513272700.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:40.492Z,1513272700.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:40.899Z,1513272700.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:41.275Z,1513272701.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:41.701Z,1513272701.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:42.101Z,1513272702.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:42.491Z,1513272702.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:42.914Z,1513272702.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:43.267Z,1513272703.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:43.681Z,1513272703.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:44.121Z,1513272704.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:44.479Z,1513272704.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:44.943Z,1513272704.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:45.285Z,1513272705.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:45.693Z,1513272705.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:46.095Z,1513272706.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:46.486Z,1513272706.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:46.893Z,1513272706.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:47.290Z,1513272707.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:47.691Z,1513272707.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:48.111Z,1513272708.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:48.471Z,1513272708.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:48.864Z,1513272708.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:49.262Z,1513272709.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:49.663Z,1513272709.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:50.064Z,1513272710.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:50.503Z,1513272710.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:50.907Z,1513272710.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:50.915Z,1513272710.915 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:26:50.6Z
2017-12-14T17:31:50.915Z,1513272710.915 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:31:50.915Z,1513272710.915 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:31:51.339Z,1513272711.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:52.078Z,1513272712.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:52.219Z,1513272712.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:55.673Z,1513272715.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:55.749Z,1513272715.749 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0392.lzma
2017-12-14T17:31:55.823Z,1513272715.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:56.216Z,1513272716.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:56.504Z,1513272716.504 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0392.lzma.bak
2017-12-14T17:31:56.504Z,1513272716.504 [DataOverHttps](INFO): SBD MOMSN=5439259
2017-12-14T17:31:56.556Z,1513272716.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:57.795Z,1513272717.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:31:58.056Z,1513272718.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:01.510Z,1513272721.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:01.651Z,1513272721.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:02.072Z,1513272722.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:02.423Z,1513272722.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:02.790Z,1513272722.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:03.195Z,1513272723.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:06.844Z,1513272726.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:06.991Z,1513272726.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:07.331Z,1513272727.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:07.719Z,1513272727.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:08.117Z,1513272728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:08.516Z,1513272728.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:11.916Z,1513272731.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:12.025Z,1513272732.025 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0393.lzma
2017-12-14T17:32:12.092Z,1513272732.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:12.499Z,1513272732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:12.832Z,1513272732.832 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0393.lzma.bak
2017-12-14T17:32:12.832Z,1513272732.832 [DataOverHttps](INFO): SBD MOMSN=5439261
2017-12-14T17:32:12.923Z,1513272732.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:14.199Z,1513272734.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:14.202Z,1513272734.202 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:32:14.203Z,1513272734.203 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:32:14.203Z,1513272734.203 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:32:14.331Z,1513272734.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:17.743Z,1513272737.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:17.880Z,1513272737.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:18.229Z,1513272738.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:18.637Z,1513272738.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:19.075Z,1513272739.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:19.427Z,1513272739.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:19.855Z,1513272739.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:20.222Z,1513272740.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:20.667Z,1513272740.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:21.039Z,1513272741.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:21.422Z,1513272741.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:21.822Z,1513272741.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:22.230Z,1513272742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:22.621Z,1513272742.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:23.027Z,1513272743.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:23.431Z,1513272743.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:23.835Z,1513272743.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:24.235Z,1513272744.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:24.634Z,1513272744.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:25.031Z,1513272745.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:25.410Z,1513272745.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:25.814Z,1513272745.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:26.231Z,1513272746.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:26.691Z,1513272746.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:27.039Z,1513272747.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:27.440Z,1513272747.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:27.811Z,1513272747.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:28.212Z,1513272748.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:28.619Z,1513272748.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:29.044Z,1513272749.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:29.445Z,1513272749.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:29.864Z,1513272749.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:30.220Z,1513272750.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:30.615Z,1513272750.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.016Z,1513272751.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.416Z,1513272751.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.818Z,1513272751.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.819Z,1513272751.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 339
2017-12-14T17:32:31.819Z,1513272751.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:32:31.820Z,1513272751.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.820Z,1513272751.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 339
2017-12-14T17:32:31.821Z,1513272751.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:32:31.822Z,1513272751.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:31.823Z,1513272751.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 339
2017-12-14T17:32:31.823Z,1513272751.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:32:31.859Z,1513272751.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:32:31.859Z,1513272751.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:32:31.859Z,1513272751.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:32:32.246Z,1513272752.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:32:32.246Z,1513272752.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 339
2017-12-14T17:32:32.247Z,1513272752.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:32:32.247Z,1513272752.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 339
2017-12-14T17:32:32.247Z,1513272752.247 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:32:32.247Z,1513272752.247 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 339
2017-12-14T17:32:32.631Z,1513272752.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:32:32.631Z,1513272752.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:32:32.631Z,1513272752.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:32:32.632Z,1513272752.632 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:32:32.632Z,1513272752.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:32:32.632Z,1513272752.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:32:32.638Z,1513272752.638 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:32:32.638Z,1513272752.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:32:32.639Z,1513272752.639 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:32:33.035Z,1513272753.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:33.422Z,1513272753.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:33.822Z,1513272753.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:34.228Z,1513272754.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:34.626Z,1513272754.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:35.024Z,1513272755.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:35.429Z,1513272755.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:35.851Z,1513272755.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:36.282Z,1513272756.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:36.626Z,1513272756.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:37.025Z,1513272757.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:37.425Z,1513272757.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:37.819Z,1513272757.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:38.238Z,1513272758.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:38.639Z,1513272758.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:39.040Z,1513272759.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:39.459Z,1513272759.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:39.811Z,1513272759.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:40.239Z,1513272760.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:40.643Z,1513272760.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:41.010Z,1513272761.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:41.456Z,1513272761.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:41.827Z,1513272761.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:42.251Z,1513272762.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:42.636Z,1513272762.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:43.035Z,1513272763.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:43.408Z,1513272763.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:43.807Z,1513272763.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:44.223Z,1513272764.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:44.620Z,1513272764.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:45.020Z,1513272765.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:45.412Z,1513272765.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:45.842Z,1513272765.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:46.210Z,1513272766.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:46.611Z,1513272766.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:47.008Z,1513272767.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:47.420Z,1513272767.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:47.870Z,1513272767.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:48.227Z,1513272768.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:48.611Z,1513272768.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:49.011Z,1513272769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:49.407Z,1513272769.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:49.851Z,1513272769.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:50.217Z,1513272770.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:50.620Z,1513272770.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:51.025Z,1513272771.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:51.440Z,1513272771.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:51.815Z,1513272771.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:52.210Z,1513272772.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:52.611Z,1513272772.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:53.008Z,1513272773.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:53.431Z,1513272773.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:53.820Z,1513272773.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:54.219Z,1513272774.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:54.610Z,1513272774.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:55.009Z,1513272775.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:55.415Z,1513272775.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:55.812Z,1513272775.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:56.213Z,1513272776.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:56.627Z,1513272776.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:57.099Z,1513272777.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:57.407Z,1513272777.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:57.808Z,1513272777.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:58.207Z,1513272778.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:58.606Z,1513272778.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:59.016Z,1513272779.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:59.423Z,1513272779.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:32:59.825Z,1513272779.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:00.220Z,1513272780.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:00.608Z,1513272780.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:01.016Z,1513272781.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:01.440Z,1513272781.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:01.811Z,1513272781.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:02.220Z,1513272782.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:02.677Z,1513272782.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:03.023Z,1513272783.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:03.444Z,1513272783.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:03.839Z,1513272783.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:04.206Z,1513272784.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:04.712Z,1513272784.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:05.011Z,1513272785.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:05.443Z,1513272785.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:05.825Z,1513272785.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:06.220Z,1513272786.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:06.680Z,1513272786.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:07.019Z,1513272787.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:07.426Z,1513272787.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:07.819Z,1513272787.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:08.227Z,1513272788.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:08.632Z,1513272788.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:09.047Z,1513272789.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:09.419Z,1513272789.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:09.823Z,1513272789.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:10.213Z,1513272790.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:10.616Z,1513272790.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:11.015Z,1513272791.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:11.419Z,1513272791.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:11.820Z,1513272791.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:12.241Z,1513272792.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:12.615Z,1513272792.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:13.019Z,1513272793.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:13.412Z,1513272793.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:13.856Z,1513272793.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:14.243Z,1513272794.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:14.620Z,1513272794.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:18.110Z,1513272798.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:18.248Z,1513272798.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:18.599Z,1513272798.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:18.996Z,1513272798.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:19.398Z,1513272799.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:19.779Z,1513272799.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:20.199Z,1513272800.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:20.602Z,1513272800.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:21.003Z,1513272801.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:21.399Z,1513272801.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:21.784Z,1513272801.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:22.255Z,1513272802.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:22.583Z,1513272802.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:22.991Z,1513272802.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:23.414Z,1513272803.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:23.790Z,1513272803.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:24.185Z,1513272804.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:24.583Z,1513272804.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:24.985Z,1513272804.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:25.487Z,1513272805.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:25.816Z,1513272805.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:26.207Z,1513272806.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:26.631Z,1513272806.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:26.998Z,1513272806.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:27.427Z,1513272807.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:27.785Z,1513272807.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:28.191Z,1513272808.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:28.607Z,1513272808.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:28.986Z,1513272808.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:29.399Z,1513272809.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:29.802Z,1513272809.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:30.200Z,1513272810.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:30.595Z,1513272810.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:30.976Z,1513272810.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:31.379Z,1513272811.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:31.866Z,1513272811.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:32.196Z,1513272812.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:32.607Z,1513272812.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:33.010Z,1513272813.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:33.376Z,1513272813.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:33.780Z,1513272813.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:34.184Z,1513272814.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:34.594Z,1513272814.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:34.991Z,1513272814.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:35.394Z,1513272815.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:35.827Z,1513272815.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:36.194Z,1513272816.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:36.595Z,1513272816.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:36.996Z,1513272816.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:37.386Z,1513272817.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:37.786Z,1513272817.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:38.249Z,1513272818.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:38.602Z,1513272818.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:38.993Z,1513272818.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:39.388Z,1513272819.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:39.795Z,1513272819.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:40.191Z,1513272820.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:40.589Z,1513272820.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:40.991Z,1513272820.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:41.455Z,1513272821.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:41.798Z,1513272821.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:42.201Z,1513272822.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:42.604Z,1513272822.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:42.984Z,1513272822.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:43.376Z,1513272823.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:43.802Z,1513272823.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:44.209Z,1513272824.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:44.607Z,1513272824.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:45.009Z,1513272825.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:45.394Z,1513272825.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:45.782Z,1513272825.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:46.187Z,1513272826.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:46.591Z,1513272826.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:47.016Z,1513272827.016 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T17:33:47.016Z,1513272827.016 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:33:47.016Z,1513272827.016 [BPC1](ERROR): Data Fault
2017-12-14T17:33:47.108Z,1513272827.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:47.224Z,1513272827.224 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:33:47.388Z,1513272827.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:47.874Z,1513272827.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:48.194Z,1513272828.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:48.208Z,1513272828.208 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:33:48.208Z,1513272828.208 [BPC1] No Fault, FailCount= 1
2017-12-14T17:33:48.639Z,1513272828.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:48.987Z,1513272828.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:49.389Z,1513272829.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:49.791Z,1513272829.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:50.192Z,1513272830.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:50.603Z,1513272830.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:51.003Z,1513272831.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:51.391Z,1513272831.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:51.789Z,1513272831.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:52.199Z,1513272832.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:52.594Z,1513272832.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:52.986Z,1513272832.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:53.403Z,1513272833.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:53.800Z,1513272833.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:54.235Z,1513272834.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:54.596Z,1513272834.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:55.009Z,1513272835.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:55.389Z,1513272835.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:55.790Z,1513272835.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:56.200Z,1513272836.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:56.604Z,1513272836.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:57.039Z,1513272837.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:57.454Z,1513272837.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:57.793Z,1513272837.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:58.194Z,1513272838.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:58.595Z,1513272838.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:58.995Z,1513272838.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:59.400Z,1513272839.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:33:59.797Z,1513272839.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:00.199Z,1513272840.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:00.643Z,1513272840.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:00.993Z,1513272840.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:01.399Z,1513272841.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:01.797Z,1513272841.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:02.191Z,1513272842.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:02.602Z,1513272842.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:03.002Z,1513272843.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:03.376Z,1513272843.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:03.857Z,1513272843.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:04.199Z,1513272844.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:04.588Z,1513272844.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:04.991Z,1513272844.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:05.407Z,1513272845.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:05.887Z,1513272845.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:06.198Z,1513272846.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:06.599Z,1513272846.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:06.989Z,1513272846.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:07.375Z,1513272847.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:07.803Z,1513272847.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:08.207Z,1513272848.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:08.611Z,1513272848.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:09.067Z,1513272849.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:09.384Z,1513272849.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:09.815Z,1513272849.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:10.227Z,1513272850.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:10.623Z,1513272850.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:10.983Z,1513272850.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:11.399Z,1513272851.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:11.798Z,1513272851.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:12.203Z,1513272852.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:12.591Z,1513272852.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:12.988Z,1513272852.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:13.388Z,1513272853.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:13.784Z,1513272853.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:14.198Z,1513272854.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:14.601Z,1513272854.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:15.003Z,1513272855.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:18.479Z,1513272858.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:18.618Z,1513272858.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:18.999Z,1513272858.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:19.373Z,1513272859.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:19.779Z,1513272859.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:20.155Z,1513272860.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:20.554Z,1513272860.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:20.957Z,1513272860.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:21.310Z,1513272861.310 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:34:21.310Z,1513272861.310 [NAL9602] Data Fault, FailCount= 3
2017-12-14T17:34:21.310Z,1513272861.310 [NAL9602](ERROR): Data Fault
2017-12-14T17:34:21.363Z,1513272861.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:21.376Z,1513272861.376 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:34:21.710Z,1513272861.710 [NAL9602](INFO): Powering down
2017-12-14T17:34:21.766Z,1513272861.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:22.153Z,1513272862.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:22.551Z,1513272862.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:22.563Z,1513272862.563 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:34:22.564Z,1513272862.564 [NAL9602] No Fault, FailCount= 3
2017-12-14T17:34:22.951Z,1513272862.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:23.351Z,1513272863.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:23.772Z,1513272863.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:24.163Z,1513272864.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:24.558Z,1513272864.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:24.950Z,1513272864.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:25.349Z,1513272865.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:25.750Z,1513272865.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:26.207Z,1513272866.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:26.551Z,1513272866.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:26.943Z,1513272866.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:27.344Z,1513272867.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:27.742Z,1513272867.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:28.148Z,1513272868.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:28.575Z,1513272868.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:28.972Z,1513272868.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:29.358Z,1513272869.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:29.759Z,1513272869.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:30.155Z,1513272870.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:30.550Z,1513272870.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:31.003Z,1513272871.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:31.354Z,1513272871.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:31.754Z,1513272871.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:32.191Z,1513272872.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:32.598Z,1513272872.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:32.994Z,1513272872.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:33.352Z,1513272873.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:33.753Z,1513272873.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:34.155Z,1513272874.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:34.551Z,1513272874.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:34.951Z,1513272874.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:35.350Z,1513272875.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:35.803Z,1513272875.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:36.150Z,1513272876.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:36.552Z,1513272876.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:36.959Z,1513272876.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:37.354Z,1513272877.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:37.759Z,1513272877.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:38.155Z,1513272878.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:38.558Z,1513272878.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:38.999Z,1513272878.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:39.359Z,1513272879.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:39.752Z,1513272879.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:40.159Z,1513272880.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:40.553Z,1513272880.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:40.950Z,1513272880.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:41.394Z,1513272881.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:41.751Z,1513272881.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:42.215Z,1513272882.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:42.559Z,1513272882.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:42.958Z,1513272882.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:43.354Z,1513272883.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:43.763Z,1513272883.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:44.162Z,1513272884.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:44.560Z,1513272884.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:44.958Z,1513272884.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:45.445Z,1513272885.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:45.756Z,1513272885.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:46.153Z,1513272886.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:46.556Z,1513272886.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:46.959Z,1513272886.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:47.357Z,1513272887.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:47.762Z,1513272887.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:48.158Z,1513272888.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:48.608Z,1513272888.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:48.958Z,1513272888.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:49.357Z,1513272889.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:49.757Z,1513272889.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:50.179Z,1513272890.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:50.559Z,1513272890.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:50.962Z,1513272890.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:51.363Z,1513272891.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:51.733Z,1513272891.733 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:34:51.768Z,1513272891.768 [BPC1](ERROR): Failed to parse message.
2017-12-14T17:34:51.768Z,1513272891.768 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T17:34:51.768Z,1513272891.768 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:34:51.768Z,1513272891.768 [BPC1](ERROR): Data Fault
2017-12-14T17:34:51.795Z,1513272891.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:51.866Z,1513272891.866 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:34:52.152Z,1513272892.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:52.582Z,1513272892.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:52.950Z,1513272892.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:52.972Z,1513272892.972 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:34:52.972Z,1513272892.972 [BPC1] No Fault, FailCount= 1
2017-12-14T17:34:53.407Z,1513272893.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:53.749Z,1513272893.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:54.152Z,1513272894.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:54.556Z,1513272894.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:55.033Z,1513272895.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:55.350Z,1513272895.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:55.755Z,1513272895.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:56.155Z,1513272896.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:56.554Z,1513272896.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:56.954Z,1513272896.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:57.353Z,1513272897.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:57.751Z,1513272897.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:58.188Z,1513272898.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:58.550Z,1513272898.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:58.954Z,1513272898.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:59.354Z,1513272899.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:34:59.752Z,1513272899.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:00.148Z,1513272900.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:00.550Z,1513272900.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:00.950Z,1513272900.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:01.411Z,1513272901.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:01.791Z,1513272901.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:02.155Z,1513272902.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:02.556Z,1513272902.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:02.915Z,1513272902.915 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:35:02.963Z,1513272902.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:03.352Z,1513272903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:03.757Z,1513272903.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:04.157Z,1513272904.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:04.607Z,1513272904.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:04.962Z,1513272904.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:05.355Z,1513272905.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:05.763Z,1513272905.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:06.166Z,1513272906.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:06.571Z,1513272906.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:06.971Z,1513272906.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:07.356Z,1513272907.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:07.811Z,1513272907.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:08.152Z,1513272908.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:08.563Z,1513272908.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:08.958Z,1513272908.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:09.361Z,1513272909.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:09.765Z,1513272909.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:10.171Z,1513272910.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:10.552Z,1513272910.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:11.007Z,1513272911.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:11.359Z,1513272911.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:11.762Z,1513272911.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:12.166Z,1513272912.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:12.621Z,1513272912.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:12.973Z,1513272912.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:13.376Z,1513272913.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:13.765Z,1513272913.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:14.223Z,1513272914.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:14.568Z,1513272914.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:14.979Z,1513272914.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:15.375Z,1513272915.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:18.885Z,1513272918.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:19.043Z,1513272919.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:19.383Z,1513272919.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:19.780Z,1513272919.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:20.178Z,1513272920.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:20.587Z,1513272920.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:20.983Z,1513272920.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:21.395Z,1513272921.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:21.795Z,1513272921.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:22.189Z,1513272922.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:22.591Z,1513272922.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:23.018Z,1513272923.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:23.385Z,1513272923.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:23.790Z,1513272923.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:24.191Z,1513272924.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:24.589Z,1513272924.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:24.992Z,1513272924.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:25.383Z,1513272925.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:25.784Z,1513272925.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:26.182Z,1513272926.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:26.587Z,1513272926.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:26.987Z,1513272926.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:27.387Z,1513272927.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:27.791Z,1513272927.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:28.193Z,1513272928.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:28.578Z,1513272928.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:28.992Z,1513272928.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:29.392Z,1513272929.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:29.799Z,1513272929.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:30.244Z,1513272930.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:30.600Z,1513272930.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:30.988Z,1513272930.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:31.398Z,1513272931.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:31.770Z,1513272931.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:32.195Z,1513272932.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:32.572Z,1513272932.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:33.002Z,1513272933.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:33.002Z,1513272933.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 340
2017-12-14T17:35:33.002Z,1513272933.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:35:33.003Z,1513272933.003 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:33.004Z,1513272933.004 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 340
2017-12-14T17:35:33.004Z,1513272933.004 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:35:33.006Z,1513272933.006 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:33.006Z,1513272933.006 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 340
2017-12-14T17:35:33.006Z,1513272933.006 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:35:33.018Z,1513272933.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:35:33.018Z,1513272933.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:35:33.018Z,1513272933.018 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:35:33.482Z,1513272933.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:35:33.482Z,1513272933.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 340
2017-12-14T17:35:33.483Z,1513272933.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:35:33.483Z,1513272933.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 340
2017-12-14T17:35:33.483Z,1513272933.483 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:35:33.483Z,1513272933.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 340
2017-12-14T17:35:33.785Z,1513272933.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:35:33.785Z,1513272933.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:35:33.785Z,1513272933.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:35:33.786Z,1513272933.786 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:35:33.786Z,1513272933.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:35:33.787Z,1513272933.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:35:33.787Z,1513272933.787 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:35:33.787Z,1513272933.787 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:35:33.788Z,1513272933.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:35:34.235Z,1513272934.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:34.567Z,1513272934.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:34.971Z,1513272934.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:35.412Z,1513272935.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:35.800Z,1513272935.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:36.245Z,1513272936.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:36.579Z,1513272936.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:37.014Z,1513272937.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:37.383Z,1513272937.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:37.780Z,1513272937.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:38.183Z,1513272938.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:38.587Z,1513272938.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:38.991Z,1513272938.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:39.373Z,1513272939.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:39.825Z,1513272939.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:40.174Z,1513272940.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:40.583Z,1513272940.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:40.979Z,1513272940.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:41.388Z,1513272941.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:41.791Z,1513272941.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:42.189Z,1513272942.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:42.583Z,1513272942.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:42.983Z,1513272942.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:43.376Z,1513272943.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:43.787Z,1513272943.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:44.186Z,1513272944.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:44.592Z,1513272944.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:44.988Z,1513272944.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:45.415Z,1513272945.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:45.779Z,1513272945.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:46.226Z,1513272946.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:46.576Z,1513272946.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:46.981Z,1513272946.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:47.388Z,1513272947.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:47.799Z,1513272947.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:48.189Z,1513272948.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:48.583Z,1513272948.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:48.977Z,1513272948.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:49.422Z,1513272949.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:49.784Z,1513272949.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:50.188Z,1513272950.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:50.596Z,1513272950.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:50.999Z,1513272950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:51.380Z,1513272951.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:51.775Z,1513272951.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:52.184Z,1513272952.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:52.596Z,1513272952.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:52.986Z,1513272952.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:53.395Z,1513272953.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:53.795Z,1513272953.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:54.190Z,1513272954.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:54.578Z,1513272954.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:54.991Z,1513272954.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:55.367Z,1513272955.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:55.843Z,1513272955.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:56.231Z,1513272956.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:56.603Z,1513272956.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:57.004Z,1513272957.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:57.408Z,1513272957.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:57.776Z,1513272957.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:58.183Z,1513272958.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:58.581Z,1513272958.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:59.039Z,1513272959.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:59.395Z,1513272959.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:35:59.820Z,1513272959.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:00.200Z,1513272960.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:00.587Z,1513272960.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:00.981Z,1513272960.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:01.379Z,1513272961.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:01.784Z,1513272961.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:02.243Z,1513272962.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:02.584Z,1513272962.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:02.985Z,1513272962.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:03.372Z,1513272963.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:03.772Z,1513272963.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:04.178Z,1513272964.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:04.579Z,1513272964.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:05.009Z,1513272965.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:05.384Z,1513272965.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:05.783Z,1513272965.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:06.188Z,1513272966.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:06.576Z,1513272966.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:06.978Z,1513272966.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:07.383Z,1513272967.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:07.780Z,1513272967.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:08.226Z,1513272968.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:08.623Z,1513272968.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:09.027Z,1513272969.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:09.382Z,1513272969.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:09.783Z,1513272969.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:10.183Z,1513272970.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:10.588Z,1513272970.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:10.976Z,1513272970.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:11.390Z,1513272971.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:11.803Z,1513272971.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:12.191Z,1513272972.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:12.587Z,1513272972.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:12.984Z,1513272972.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:13.379Z,1513272973.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:13.782Z,1513272973.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:14.191Z,1513272974.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:14.594Z,1513272974.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:15.000Z,1513272975.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:15.391Z,1513272975.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:18.903Z,1513272978.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:19.058Z,1513272979.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:19.395Z,1513272979.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:19.804Z,1513272979.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:20.195Z,1513272980.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:20.641Z,1513272980.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:20.992Z,1513272980.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:21.410Z,1513272981.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:21.819Z,1513272981.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:22.234Z,1513272982.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:22.627Z,1513272982.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:23.018Z,1513272983.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:23.449Z,1513272983.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:23.814Z,1513272983.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:24.219Z,1513272984.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:24.587Z,1513272984.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:24.987Z,1513272984.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:25.471Z,1513272985.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:25.813Z,1513272985.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:26.200Z,1513272986.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:26.583Z,1513272986.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:26.984Z,1513272986.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:27.392Z,1513272987.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:27.799Z,1513272987.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:28.248Z,1513272988.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:28.583Z,1513272988.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:29.011Z,1513272989.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:29.387Z,1513272989.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:29.779Z,1513272989.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:30.202Z,1513272990.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:30.616Z,1513272990.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:31.064Z,1513272991.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:31.395Z,1513272991.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:31.800Z,1513272991.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:32.192Z,1513272992.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:32.599Z,1513272992.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:33.007Z,1513272993.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:33.401Z,1513272993.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:33.810Z,1513272993.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:34.259Z,1513272994.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:34.616Z,1513272994.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:35.015Z,1513272995.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:35.423Z,1513272995.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:35.811Z,1513272995.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:36.244Z,1513272996.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:36.670Z,1513272996.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:36.996Z,1513272996.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:37.419Z,1513272997.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:37.788Z,1513272997.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:38.180Z,1513272998.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:38.607Z,1513272998.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:39.003Z,1513272999.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:39.416Z,1513272999.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:39.820Z,1513272999.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:40.211Z,1513273000.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:40.588Z,1513273000.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:41.012Z,1513273001.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:41.382Z,1513273001.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:41.785Z,1513273001.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:42.210Z,1513273002.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:42.611Z,1513273002.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:43.056Z,1513273003.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:43.406Z,1513273003.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:43.811Z,1513273003.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:44.220Z,1513273004.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:44.595Z,1513273004.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:45.027Z,1513273005.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:45.396Z,1513273005.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:45.830Z,1513273005.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:46.180Z,1513273006.180 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:36:46.180Z,1513273006.180 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:36:46.180Z,1513273006.180 [BPC1](ERROR): Communications Fault
2017-12-14T17:36:46.239Z,1513273006.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:46.329Z,1513273006.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:36:46.596Z,1513273006.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:47.003Z,1513273007.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:47.397Z,1513273007.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:47.443Z,1513273007.443 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:36:47.443Z,1513273007.443 [BPC1] No Fault, FailCount= 1
2017-12-14T17:36:47.883Z,1513273007.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:48.206Z,1513273008.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:48.618Z,1513273008.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:49.014Z,1513273009.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:49.405Z,1513273009.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:49.805Z,1513273009.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:50.206Z,1513273010.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:50.587Z,1513273010.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:51.012Z,1513273011.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:51.414Z,1513273011.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:51.811Z,1513273011.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:52.221Z,1513273012.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:52.617Z,1513273012.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:52.982Z,1513273012.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:53.377Z,1513273013.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:53.784Z,1513273013.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:54.189Z,1513273014.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:54.595Z,1513273014.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:54.989Z,1513273014.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:55.445Z,1513273015.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:55.785Z,1513273015.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:56.215Z,1513273016.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:56.582Z,1513273016.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:56.980Z,1513273016.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:57.395Z,1513273017.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:57.796Z,1513273017.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:58.190Z,1513273018.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:58.609Z,1513273018.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:58.977Z,1513273018.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:59.384Z,1513273019.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:36:59.800Z,1513273019.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:00.188Z,1513273020.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:00.599Z,1513273020.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:00.989Z,1513273020.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:01.385Z,1513273021.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:01.844Z,1513273021.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:02.186Z,1513273022.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:02.587Z,1513273022.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:02.984Z,1513273022.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:03.443Z,1513273023.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:03.790Z,1513273023.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:04.199Z,1513273024.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:04.587Z,1513273024.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:04.985Z,1513273024.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:05.391Z,1513273025.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:05.771Z,1513273025.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:06.193Z,1513273026.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:06.595Z,1513273026.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:07.003Z,1513273027.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:07.367Z,1513273027.367 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T17:37:07.367Z,1513273027.367 [BPC1] Data Fault, FailCount= 2
2017-12-14T17:37:07.367Z,1513273027.367 [BPC1](ERROR): Data Fault
2017-12-14T17:37:07.400Z,1513273027.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:07.426Z,1513273027.426 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:37:07.772Z,1513273027.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:08.196Z,1513273028.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:08.582Z,1513273028.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:08.595Z,1513273028.595 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:37:08.595Z,1513273028.595 [BPC1] No Fault, FailCount= 2
2017-12-14T17:37:09.027Z,1513273029.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:09.389Z,1513273029.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:09.789Z,1513273029.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:10.195Z,1513273030.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:10.585Z,1513273030.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:10.986Z,1513273030.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:11.498Z,1513273031.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:11.786Z,1513273031.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:12.191Z,1513273032.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:12.595Z,1513273032.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:13.005Z,1513273033.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:13.377Z,1513273033.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:13.779Z,1513273033.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:14.210Z,1513273034.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:14.621Z,1513273034.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:14.629Z,1513273034.629 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:37:14.629Z,1513273034.629 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:37:14.629Z,1513273034.629 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:37:14.629Z,1513273034.629 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:37:14.995Z,1513273034.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:15.020Z,1513273035.020 [Default:CheckIn:D] Stopped
2017-12-14T17:37:15.020Z,1513273035.020 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:37:15.392Z,1513273035.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:15.395Z,1513273035.395 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1023.993815 min 
2017-12-14T17:37:15.395Z,1513273035.395 [Default:CheckIn:E] Stopped
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn] Stopped
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn](INFO): Running loop #99
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn] Running Loop=99
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:37:15.396Z,1513273035.396 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:37:15.795Z,1513273035.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:19.474Z,1513273039.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:19.618Z,1513273039.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:20.022Z,1513273040.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:20.373Z,1513273040.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:20.772Z,1513273040.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:21.186Z,1513273041.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:21.570Z,1513273041.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:22.024Z,1513273042.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:22.366Z,1513273042.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:22.774Z,1513273042.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:23.171Z,1513273043.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:23.564Z,1513273043.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:23.947Z,1513273043.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:24.429Z,1513273044.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:24.790Z,1513273044.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:25.162Z,1513273045.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:25.561Z,1513273045.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:25.962Z,1513273045.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:26.407Z,1513273046.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:26.759Z,1513273046.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:27.152Z,1513273047.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:27.616Z,1513273047.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:27.970Z,1513273047.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:28.408Z,1513273048.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:28.771Z,1513273048.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:29.163Z,1513273049.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:29.553Z,1513273049.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:30.024Z,1513273050.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:30.358Z,1513273050.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:30.763Z,1513273050.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:31.179Z,1513273051.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:31.623Z,1513273051.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:32.051Z,1513273052.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:32.383Z,1513273052.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:32.791Z,1513273052.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:33.159Z,1513273053.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:33.594Z,1513273053.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:34.030Z,1513273054.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:34.388Z,1513273054.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:34.758Z,1513273054.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:35.158Z,1513273055.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:35.551Z,1513273055.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:36.032Z,1513273056.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:36.360Z,1513273056.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:36.759Z,1513273056.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:37.171Z,1513273057.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:37.559Z,1513273057.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:38.050Z,1513273058.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:38.339Z,1513273058.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:38.749Z,1513273058.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:39.148Z,1513273059.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:39.548Z,1513273059.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:39.948Z,1513273059.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:40.442Z,1513273060.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:40.783Z,1513273060.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:41.159Z,1513273061.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:41.551Z,1513273061.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:41.987Z,1513273061.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:42.416Z,1513273062.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:42.752Z,1513273062.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:43.159Z,1513273063.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:43.620Z,1513273063.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:44.014Z,1513273064.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:44.346Z,1513273064.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:44.750Z,1513273064.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:45.148Z,1513273065.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:45.548Z,1513273065.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:46.023Z,1513273066.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:46.360Z,1513273066.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:46.840Z,1513273066.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:47.178Z,1513273067.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:47.546Z,1513273067.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:48.023Z,1513273068.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:48.371Z,1513273068.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:48.752Z,1513273068.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:49.168Z,1513273069.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:49.571Z,1513273069.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:50.047Z,1513273070.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:50.374Z,1513273070.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:50.754Z,1513273070.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:51.151Z,1513273071.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:51.553Z,1513273071.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:51.949Z,1513273071.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:52.371Z,1513273072.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:52.777Z,1513273072.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:53.164Z,1513273073.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:53.548Z,1513273073.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:53.971Z,1513273073.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:54.411Z,1513273074.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:54.752Z,1513273074.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:55.242Z,1513273075.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:55.557Z,1513273075.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:55.997Z,1513273075.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:56.421Z,1513273076.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:56.747Z,1513273076.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:57.154Z,1513273077.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:57.552Z,1513273077.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:58.025Z,1513273078.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:58.372Z,1513273078.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:58.771Z,1513273078.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:59.167Z,1513273079.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:37:59.540Z,1513273079.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:00.039Z,1513273080.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:00.350Z,1513273080.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:00.759Z,1513273080.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:01.163Z,1513273081.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:01.562Z,1513273081.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:02.020Z,1513273082.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:02.357Z,1513273082.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:02.818Z,1513273082.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:03.167Z,1513273083.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:03.566Z,1513273083.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:04.039Z,1513273084.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:04.386Z,1513273084.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:04.775Z,1513273084.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:05.171Z,1513273085.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:05.559Z,1513273085.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:06.040Z,1513273086.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:06.367Z,1513273086.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:06.752Z,1513273086.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:07.168Z,1513273087.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:07.571Z,1513273087.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:07.965Z,1513273087.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:08.380Z,1513273088.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:08.762Z,1513273088.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:09.158Z,1513273089.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:09.551Z,1513273089.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:09.952Z,1513273089.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:10.402Z,1513273090.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:10.756Z,1513273090.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:11.159Z,1513273091.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:11.559Z,1513273091.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:12.027Z,1513273092.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:12.417Z,1513273092.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:12.744Z,1513273092.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:13.174Z,1513273093.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:13.573Z,1513273093.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:14.023Z,1513273094.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:14.356Z,1513273094.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:14.748Z,1513273094.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:15.152Z,1513273095.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:15.613Z,1513273095.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:16.065Z,1513273096.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:19.363Z,1513273099.363 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:38:19.363Z,1513273099.363 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:38:19.363Z,1513273099.363 [BPC1](ERROR): Communications Fault
2017-12-14T17:38:19.371Z,1513273099.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:19.384Z,1513273099.384 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:38:19.531Z,1513273099.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:19.908Z,1513273099.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:20.280Z,1513273100.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:20.309Z,1513273100.309 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:38:20.309Z,1513273100.309 [BPC1] No Fault, FailCount= 1
2017-12-14T17:38:20.720Z,1513273100.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:21.081Z,1513273101.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:21.483Z,1513273101.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:21.880Z,1513273101.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:22.355Z,1513273102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:22.710Z,1513273102.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:23.104Z,1513273103.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:23.483Z,1513273103.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:23.879Z,1513273103.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:24.358Z,1513273104.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:24.683Z,1513273104.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:25.165Z,1513273105.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:25.491Z,1513273105.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:25.884Z,1513273105.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:26.287Z,1513273106.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:26.681Z,1513273106.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:27.084Z,1513273107.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:27.483Z,1513273107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:27.887Z,1513273107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:28.350Z,1513273108.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:28.703Z,1513273108.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:29.140Z,1513273109.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:29.496Z,1513273109.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:29.874Z,1513273109.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:30.304Z,1513273110.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:30.687Z,1513273110.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:31.092Z,1513273111.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:31.510Z,1513273111.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:31.891Z,1513273111.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:32.282Z,1513273112.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:32.687Z,1513273112.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.091Z,1513273113.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.483Z,1513273113.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.881Z,1513273113.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.881Z,1513273113.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 341
2017-12-14T17:38:33.881Z,1513273113.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:38:33.883Z,1513273113.883 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.883Z,1513273113.883 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 341
2017-12-14T17:38:33.883Z,1513273113.883 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:38:33.885Z,1513273113.885 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:33.886Z,1513273113.886 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 341
2017-12-14T17:38:33.886Z,1513273113.886 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:38:33.898Z,1513273113.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:38:33.898Z,1513273113.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:38:33.898Z,1513273113.898 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:38:34.313Z,1513273114.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:38:34.313Z,1513273114.313 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 341
2017-12-14T17:38:34.314Z,1513273114.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:38:34.314Z,1513273114.314 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 341
2017-12-14T17:38:34.314Z,1513273114.314 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:38:34.314Z,1513273114.314 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 341
2017-12-14T17:38:34.754Z,1513273114.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:38:34.754Z,1513273114.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:38:34.754Z,1513273114.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:38:34.755Z,1513273114.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:38:34.755Z,1513273114.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:38:34.755Z,1513273114.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:38:34.756Z,1513273114.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:38:34.756Z,1513273114.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:38:34.757Z,1513273114.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:38:35.096Z,1513273115.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:35.491Z,1513273115.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:35.886Z,1513273115.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:36.343Z,1513273116.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:36.693Z,1513273116.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:37.104Z,1513273117.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:37.505Z,1513273117.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:37.907Z,1513273117.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:38.361Z,1513273118.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:38.679Z,1513273118.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:39.088Z,1513273119.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:39.508Z,1513273119.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:39.884Z,1513273119.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:40.301Z,1513273120.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:40.707Z,1513273120.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:41.159Z,1513273121.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:41.480Z,1513273121.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:41.904Z,1513273121.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:42.281Z,1513273122.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:42.678Z,1513273122.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:43.085Z,1513273123.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:43.485Z,1513273123.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:43.891Z,1513273123.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:44.339Z,1513273124.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:44.693Z,1513273124.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:45.089Z,1513273125.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:45.490Z,1513273125.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:45.987Z,1513273125.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:46.280Z,1513273126.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:46.708Z,1513273126.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:47.112Z,1513273127.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:47.528Z,1513273127.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:47.883Z,1513273127.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:48.283Z,1513273128.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:48.691Z,1513273128.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:49.087Z,1513273129.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:49.488Z,1513273129.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:49.887Z,1513273129.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:50.379Z,1513273130.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:50.724Z,1513273130.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:51.083Z,1513273131.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:51.487Z,1513273131.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:51.883Z,1513273131.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:52.348Z,1513273132.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:52.711Z,1513273132.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:53.097Z,1513273133.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:53.483Z,1513273133.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:53.918Z,1513273133.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:54.286Z,1513273134.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:54.691Z,1513273134.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:55.099Z,1513273135.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:55.495Z,1513273135.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:55.891Z,1513273135.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:56.291Z,1513273136.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:56.691Z,1513273136.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:57.103Z,1513273137.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:57.499Z,1513273137.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:57.896Z,1513273137.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:58.303Z,1513273138.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:58.688Z,1513273138.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:59.092Z,1513273139.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:59.481Z,1513273139.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:38:59.880Z,1513273139.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:00.331Z,1513273140.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:00.683Z,1513273140.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:01.140Z,1513273141.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:01.496Z,1513273141.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:01.895Z,1513273141.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:02.314Z,1513273142.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:02.682Z,1513273142.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:03.094Z,1513273143.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:03.566Z,1513273143.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:03.917Z,1513273143.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:04.364Z,1513273144.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:04.702Z,1513273144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:05.104Z,1513273145.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:05.486Z,1513273145.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:05.879Z,1513273145.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:06.354Z,1513273146.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:06.683Z,1513273146.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:07.095Z,1513273147.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:07.491Z,1513273147.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:07.891Z,1513273147.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:08.292Z,1513273148.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:08.689Z,1513273148.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:09.089Z,1513273149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:09.491Z,1513273149.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:09.883Z,1513273149.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:10.299Z,1513273150.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:10.689Z,1513273150.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:11.099Z,1513273151.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:11.481Z,1513273151.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:11.885Z,1513273151.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:12.271Z,1513273152.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:12.710Z,1513273152.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:13.099Z,1513273153.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:13.503Z,1513273153.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:13.899Z,1513273153.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:14.282Z,1513273154.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:14.681Z,1513273154.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:15.078Z,1513273155.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:15.484Z,1513273155.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:15.883Z,1513273155.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:16.314Z,1513273156.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:19.727Z,1513273159.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:19.875Z,1513273159.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:20.219Z,1513273160.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:20.625Z,1513273160.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:20.000Z,1513273161.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:21.396Z,1513273161.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:21.807Z,1513273161.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:22.232Z,1513273162.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:22.605Z,1513273162.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:23.040Z,1513273163.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:23.440Z,1513273163.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:23.803Z,1513273163.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:24.219Z,1513273164.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:24.635Z,1513273164.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:25.134Z,1513273165.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:25.417Z,1513273165.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:25.868Z,1513273165.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:26.200Z,1513273166.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:26.641Z,1513273166.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:27.003Z,1513273167.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:27.407Z,1513273167.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:27.804Z,1513273167.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:28.199Z,1513273168.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:28.608Z,1513273168.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:29.005Z,1513273169.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:29.042Z,1513273169.042 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:39:29.420Z,1513273169.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:29.813Z,1513273169.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:30.220Z,1513273170.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:30.606Z,1513273170.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:31.009Z,1513273171.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:31.416Z,1513273171.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:31.813Z,1513273171.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:32.254Z,1513273172.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:32.595Z,1513273172.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:33.021Z,1513273173.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:33.423Z,1513273173.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:33.828Z,1513273173.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:34.192Z,1513273174.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:34.596Z,1513273174.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:35.060Z,1513273175.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:35.442Z,1513273175.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:35.816Z,1513273175.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:36.205Z,1513273176.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:36.607Z,1513273176.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:37.016Z,1513273177.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:37.423Z,1513273177.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:37.809Z,1513273177.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:38.203Z,1513273178.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:38.638Z,1513273178.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:39.015Z,1513273179.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:39.431Z,1513273179.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:39.818Z,1513273179.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:40.212Z,1513273180.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:40.609Z,1513273180.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:41.014Z,1513273181.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:41.412Z,1513273181.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:41.873Z,1513273181.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:42.200Z,1513273182.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:42.606Z,1513273182.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:43.001Z,1513273183.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:43.405Z,1513273183.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:43.804Z,1513273183.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:44.205Z,1513273184.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:44.610Z,1513273184.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:45.005Z,1513273185.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:45.403Z,1513273185.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:45.804Z,1513273185.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:46.254Z,1513273186.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:46.592Z,1513273186.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:47.067Z,1513273187.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:47.428Z,1513273187.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:47.844Z,1513273187.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:48.199Z,1513273188.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:48.631Z,1513273188.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:49.034Z,1513273189.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:49.427Z,1513273189.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:49.824Z,1513273189.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:50.203Z,1513273190.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:50.600Z,1513273190.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:51.011Z,1513273191.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:51.408Z,1513273191.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:51.816Z,1513273191.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:52.211Z,1513273192.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:52.618Z,1513273192.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:53.020Z,1513273193.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:53.420Z,1513273193.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:53.827Z,1513273193.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:54.214Z,1513273194.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:54.639Z,1513273194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:55.011Z,1513273195.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:55.408Z,1513273195.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:55.804Z,1513273195.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:56.203Z,1513273196.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:56.598Z,1513273196.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:57.080Z,1513273197.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:57.403Z,1513273197.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:57.856Z,1513273197.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:58.201Z,1513273198.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:58.606Z,1513273198.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:59.016Z,1513273199.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:59.415Z,1513273199.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:39:59.813Z,1513273199.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:00.205Z,1513273200.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:00.611Z,1513273200.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:01.064Z,1513273201.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:01.420Z,1513273201.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:01.817Z,1513273201.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:02.196Z,1513273202.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:02.595Z,1513273202.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:03.020Z,1513273203.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:03.421Z,1513273203.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:03.827Z,1513273203.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:04.278Z,1513273204.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:04.603Z,1513273204.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:05.030Z,1513273205.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:05.427Z,1513273205.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:05.826Z,1513273205.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:06.204Z,1513273206.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:06.597Z,1513273206.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:07.004Z,1513273207.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:07.506Z,1513273207.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:07.804Z,1513273207.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:08.207Z,1513273208.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:08.616Z,1513273208.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:09.007Z,1513273209.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:09.415Z,1513273209.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:09.835Z,1513273209.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:10.201Z,1513273210.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:10.651Z,1513273210.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:11.012Z,1513273211.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:11.415Z,1513273211.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:11.811Z,1513273211.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:12.207Z,1513273212.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:12.599Z,1513273212.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:13.011Z,1513273213.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:13.414Z,1513273213.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:13.850Z,1513273213.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:14.207Z,1513273214.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:14.607Z,1513273214.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:15.012Z,1513273215.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:15.419Z,1513273215.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:15.813Z,1513273215.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:16.211Z,1513273216.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:16.602Z,1513273216.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:20.115Z,1513273220.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:20.292Z,1513273220.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:20.625Z,1513273220.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:21.020Z,1513273221.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:21.421Z,1513273221.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:21.819Z,1513273221.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:22.255Z,1513273222.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:22.632Z,1513273222.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:23.062Z,1513273223.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:23.460Z,1513273223.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:23.823Z,1513273223.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:24.223Z,1513273224.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:24.620Z,1513273224.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:25.029Z,1513273225.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:25.430Z,1513273225.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:25.834Z,1513273225.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:26.218Z,1513273226.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:26.644Z,1513273226.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:27.028Z,1513273227.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:27.433Z,1513273227.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:27.839Z,1513273227.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:28.231Z,1513273228.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:28.624Z,1513273228.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:29.031Z,1513273229.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:29.425Z,1513273229.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:29.851Z,1513273229.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:30.223Z,1513273230.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:30.651Z,1513273230.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:31.032Z,1513273231.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:31.429Z,1513273231.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:31.835Z,1513273231.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:32.270Z,1513273232.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:32.624Z,1513273232.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:33.103Z,1513273233.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:33.439Z,1513273233.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:33.851Z,1513273233.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:34.237Z,1513273234.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:34.611Z,1513273234.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:35.039Z,1513273235.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:35.435Z,1513273235.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:35.835Z,1513273235.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:36.283Z,1513273236.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:36.634Z,1513273236.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:37.036Z,1513273237.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:37.420Z,1513273237.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:37.819Z,1513273237.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:38.215Z,1513273238.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:38.618Z,1513273238.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:39.044Z,1513273239.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:39.448Z,1513273239.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:39.827Z,1513273239.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:40.223Z,1513273240.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:40.620Z,1513273240.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:41.031Z,1513273241.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:41.429Z,1513273241.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:41.830Z,1513273241.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:42.255Z,1513273242.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:42.647Z,1513273242.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:43.031Z,1513273243.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:43.435Z,1513273243.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:43.830Z,1513273243.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:44.223Z,1513273244.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:44.623Z,1513273244.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:45.058Z,1513273245.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:45.432Z,1513273245.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:45.876Z,1513273245.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:46.216Z,1513273246.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:46.625Z,1513273246.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:47.024Z,1513273247.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:47.460Z,1513273247.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:47.823Z,1513273247.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:48.223Z,1513273248.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:48.631Z,1513273248.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:49.024Z,1513273249.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:49.423Z,1513273249.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:49.819Z,1513273249.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:50.217Z,1513273250.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:50.621Z,1513273250.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:51.057Z,1513273251.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:51.431Z,1513273251.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:51.834Z,1513273251.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:52.270Z,1513273252.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:52.616Z,1513273252.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:53.029Z,1513273253.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:53.436Z,1513273253.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:53.835Z,1513273253.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:54.224Z,1513273254.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:54.647Z,1513273254.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:55.033Z,1513273255.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:55.448Z,1513273255.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:55.869Z,1513273255.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:56.227Z,1513273256.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:56.658Z,1513273256.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:57.038Z,1513273257.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:57.434Z,1513273257.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:57.843Z,1513273257.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:58.213Z,1513273258.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:58.648Z,1513273258.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:59.054Z,1513273259.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:59.420Z,1513273259.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:40:59.824Z,1513273259.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:00.223Z,1513273260.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:00.619Z,1513273260.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:01.021Z,1513273261.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:01.424Z,1513273261.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:01.979Z,1513273261.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:02.216Z,1513273262.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:02.618Z,1513273262.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:03.018Z,1513273263.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:03.418Z,1513273263.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:03.821Z,1513273263.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:04.227Z,1513273264.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:04.635Z,1513273264.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:05.063Z,1513273265.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:05.424Z,1513273265.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:05.827Z,1513273265.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:06.217Z,1513273266.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:06.627Z,1513273266.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:07.039Z,1513273267.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:07.435Z,1513273267.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:07.832Z,1513273267.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:08.240Z,1513273268.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:08.616Z,1513273268.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:09.035Z,1513273269.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:09.461Z,1513273269.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:09.824Z,1513273269.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:10.219Z,1513273270.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:10.631Z,1513273270.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:11.034Z,1513273271.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:11.470Z,1513273271.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:11.828Z,1513273271.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:12.228Z,1513273272.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:12.613Z,1513273272.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:13.020Z,1513273273.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:13.428Z,1513273273.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:13.831Z,1513273273.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:14.215Z,1513273274.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:14.652Z,1513273274.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:15.032Z,1513273275.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:15.435Z,1513273275.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:15.831Z,1513273275.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:16.227Z,1513273276.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:16.621Z,1513273276.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:22.611Z,1513273282.611 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:41:22.612Z,1513273282.612 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:41:22.612Z,1513273282.612 [BPC1](ERROR): Communications Fault
2017-12-14T17:41:22.628Z,1513273282.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:22.705Z,1513273282.705 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:41:22.816Z,1513273282.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:23.307Z,1513273283.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:23.587Z,1513273283.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:23.647Z,1513273283.647 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:41:23.647Z,1513273283.647 [BPC1] No Fault, FailCount= 1
2017-12-14T17:41:24.071Z,1513273284.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:24.486Z,1513273284.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:24.838Z,1513273284.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:25.242Z,1513273285.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:25.603Z,1513273285.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:25.995Z,1513273285.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:26.413Z,1513273286.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:26.802Z,1513273286.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:27.163Z,1513273287.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:27.566Z,1513273287.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:28.135Z,1513273288.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:28.415Z,1513273288.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:28.828Z,1513273288.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:29.209Z,1513273289.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:29.590Z,1513273289.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:30.080Z,1513273290.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:30.410Z,1513273290.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:30.838Z,1513273290.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:31.231Z,1513273291.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:31.592Z,1513273291.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:32.083Z,1513273292.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:32.419Z,1513273292.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:32.773Z,1513273292.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:33.171Z,1513273293.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:33.655Z,1513273293.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.056Z,1513273294.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.430Z,1513273294.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.798Z,1513273294.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.798Z,1513273294.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 342
2017-12-14T17:41:34.798Z,1513273294.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:41:34.826Z,1513273294.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.827Z,1513273294.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 342
2017-12-14T17:41:34.827Z,1513273294.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:41:34.829Z,1513273294.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:34.829Z,1513273294.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 342
2017-12-14T17:41:34.829Z,1513273294.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:41:34.904Z,1513273294.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:41:34.904Z,1513273294.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:41:34.905Z,1513273294.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:41:35.259Z,1513273295.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:41:35.259Z,1513273295.259 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 342
2017-12-14T17:41:35.260Z,1513273295.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:41:35.260Z,1513273295.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 342
2017-12-14T17:41:35.260Z,1513273295.260 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:41:35.273Z,1513273295.273 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 342
2017-12-14T17:41:35.583Z,1513273295.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:41:35.583Z,1513273295.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:41:35.584Z,1513273295.584 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:41:35.584Z,1513273295.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:41:35.584Z,1513273295.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:41:35.593Z,1513273295.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:41:35.594Z,1513273295.594 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:41:35.594Z,1513273295.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:41:35.594Z,1513273295.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:41:36.070Z,1513273296.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:36.437Z,1513273296.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:36.772Z,1513273296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:37.218Z,1513273297.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:37.619Z,1513273297.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:37.988Z,1513273297.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:38.421Z,1513273298.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:38.782Z,1513273298.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:39.182Z,1513273299.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:39.584Z,1513273299.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:40.026Z,1513273300.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:40.438Z,1513273300.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:40.791Z,1513273300.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:41.216Z,1513273301.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:41.598Z,1513273301.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:42.055Z,1513273302.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:42.414Z,1513273302.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:42.813Z,1513273302.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:43.206Z,1513273303.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:43.607Z,1513273303.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:44.063Z,1513273304.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:44.431Z,1513273304.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:44.903Z,1513273304.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:45.195Z,1513273305.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:45.647Z,1513273305.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:46.059Z,1513273306.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:46.435Z,1513273306.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:46.811Z,1513273306.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:47.209Z,1513273307.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:47.570Z,1513273307.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:48.095Z,1513273308.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:48.398Z,1513273308.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:48.777Z,1513273308.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:49.187Z,1513273309.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:49.619Z,1513273309.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:50.064Z,1513273310.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:50.411Z,1513273310.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:50.780Z,1513273310.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:51.182Z,1513273311.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:51.653Z,1513273311.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:51.974Z,1513273311.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:52.386Z,1513273312.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:52.794Z,1513273312.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:53.184Z,1513273313.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:53.567Z,1513273313.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:53.977Z,1513273313.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:54.399Z,1513273314.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:54.798Z,1513273314.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:55.181Z,1513273315.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:55.589Z,1513273315.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:56.049Z,1513273316.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:56.377Z,1513273316.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:56.776Z,1513273316.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:57.178Z,1513273317.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:57.576Z,1513273317.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:58.054Z,1513273318.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:58.400Z,1513273318.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:58.780Z,1513273318.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:59.179Z,1513273319.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:41:59.554Z,1513273319.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:00.048Z,1513273320.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:00.402Z,1513273320.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:00.759Z,1513273320.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:01.198Z,1513273321.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:01.581Z,1513273321.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:02.063Z,1513273322.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:02.396Z,1513273322.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:02.762Z,1513273322.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:03.164Z,1513273323.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:03.564Z,1513273323.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:04.010Z,1513273324.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:04.402Z,1513273324.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:04.812Z,1513273324.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:05.179Z,1513273325.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:05.565Z,1513273325.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:05.974Z,1513273325.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:06.392Z,1513273326.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:06.827Z,1513273326.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:07.230Z,1513273327.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:07.635Z,1513273327.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:08.000Z,1513273328.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:08.423Z,1513273328.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:08.768Z,1513273328.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:09.165Z,1513273329.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:09.570Z,1513273329.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:10.040Z,1513273330.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:10.443Z,1513273330.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:10.799Z,1513273330.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:11.179Z,1513273331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:11.568Z,1513273331.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:12.035Z,1513273332.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:12.400Z,1513273332.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:12.770Z,1513273332.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:13.183Z,1513273333.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:13.623Z,1513273333.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:14.042Z,1513273334.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:14.380Z,1513273334.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:14.784Z,1513273334.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:15.160Z,1513273335.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:15.560Z,1513273335.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:15.564Z,1513273335.564 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:37:15.4Z
2017-12-14T17:42:15.564Z,1513273335.564 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:42:15.564Z,1513273335.564 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:42:16.052Z,1513273336.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:26.807Z,1513273346.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:27.006Z,1513273347.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:30.575Z,1513273350.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:30.653Z,1513273350.653 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0396.lzma
2017-12-14T17:42:30.715Z,1513273350.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:31.107Z,1513273351.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:31.888Z,1513273351.888 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0396.lzma.bak
2017-12-14T17:42:31.888Z,1513273351.888 [DataOverHttps](INFO): SBD MOMSN=5439279
2017-12-14T17:42:31.937Z,1513273351.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:32.987Z,1513273352.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:33.139Z,1513273353.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:36.675Z,1513273356.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:36.948Z,1513273356.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:37.163Z,1513273357.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:37.542Z,1513273357.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:37.988Z,1513273357.988 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T17:42:37.988Z,1513273357.988 [BPC1] Data Fault, FailCount= 1
2017-12-14T17:42:37.988Z,1513273357.988 [BPC1](ERROR): Data Fault
2017-12-14T17:42:38.018Z,1513273358.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:38.042Z,1513273358.042 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:42:38.362Z,1513273358.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:41.851Z,1513273361.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:41.981Z,1513273361.981 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0397.lzma
2017-12-14T17:42:42.093Z,1513273362.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:42.120Z,1513273362.120 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:42:42.120Z,1513273362.120 [BPC1] No Fault, FailCount= 1
2017-12-14T17:42:42.419Z,1513273362.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:42.684Z,1513273362.684 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0397.lzma.bak
2017-12-14T17:42:42.684Z,1513273362.684 [DataOverHttps](INFO): SBD MOMSN=5439281
2017-12-14T17:42:42.759Z,1513273362.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:43.863Z,1513273363.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:43.867Z,1513273363.867 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:42:43.867Z,1513273363.867 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:42:43.867Z,1513273363.867 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:42:44.054Z,1513273364.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:47.623Z,1513273367.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:47.769Z,1513273367.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:48.123Z,1513273368.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:48.523Z,1513273368.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:48.896Z,1513273368.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:49.293Z,1513273369.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:49.695Z,1513273369.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:50.122Z,1513273370.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:50.539Z,1513273370.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:50.928Z,1513273370.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:51.299Z,1513273371.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:51.732Z,1513273371.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:52.103Z,1513273372.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:52.499Z,1513273372.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:52.894Z,1513273372.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:53.304Z,1513273373.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:53.704Z,1513273373.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:54.100Z,1513273374.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:54.501Z,1513273374.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:54.947Z,1513273374.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:55.299Z,1513273375.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:55.694Z,1513273375.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:56.105Z,1513273376.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:56.509Z,1513273376.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:56.908Z,1513273376.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:57.303Z,1513273377.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:57.696Z,1513273377.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:58.167Z,1513273378.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:58.503Z,1513273378.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:58.903Z,1513273378.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:59.311Z,1513273379.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:42:59.715Z,1513273379.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:00.112Z,1513273380.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:00.504Z,1513273380.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:00.911Z,1513273380.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:01.327Z,1513273381.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:01.713Z,1513273381.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:02.116Z,1513273382.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:02.536Z,1513273382.536 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T17:43:02.536Z,1513273382.536 [BPC1] Data Fault, FailCount= 2
2017-12-14T17:43:02.536Z,1513273382.536 [BPC1](ERROR): Data Fault
2017-12-14T17:43:02.594Z,1513273382.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:02.708Z,1513273382.708 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T17:43:02.904Z,1513273382.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:03.303Z,1513273383.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:03.698Z,1513273383.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:03.728Z,1513273383.728 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:43:03.728Z,1513273383.728 [BPC1] No Fault, FailCount= 2
2017-12-14T17:43:04.139Z,1513273384.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:04.523Z,1513273384.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:04.896Z,1513273384.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:05.300Z,1513273385.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:05.704Z,1513273385.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:06.100Z,1513273386.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:06.500Z,1513273386.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:06.898Z,1513273386.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:07.301Z,1513273387.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:07.751Z,1513273387.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:08.107Z,1513273388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:08.548Z,1513273388.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:08.911Z,1513273388.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:09.303Z,1513273389.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:09.700Z,1513273389.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:10.094Z,1513273390.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:10.495Z,1513273390.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:10.948Z,1513273390.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:11.315Z,1513273391.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:11.704Z,1513273391.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:12.213Z,1513273392.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:12.504Z,1513273392.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:12.903Z,1513273392.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:13.307Z,1513273393.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:13.700Z,1513273393.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:14.143Z,1513273394.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:14.519Z,1513273394.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:14.904Z,1513273394.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:15.303Z,1513273395.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:15.738Z,1513273395.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:16.099Z,1513273396.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:16.509Z,1513273396.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:16.906Z,1513273396.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:17.347Z,1513273397.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:17.735Z,1513273397.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:18.112Z,1513273398.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:18.507Z,1513273398.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:18.910Z,1513273398.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:19.409Z,1513273399.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:19.692Z,1513273399.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:20.119Z,1513273400.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:20.547Z,1513273400.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:20.927Z,1513273400.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:21.299Z,1513273401.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:21.692Z,1513273401.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:22.123Z,1513273402.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:22.494Z,1513273402.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:22.896Z,1513273402.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:23.307Z,1513273403.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:23.735Z,1513273403.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:24.174Z,1513273404.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:24.508Z,1513273404.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:24.937Z,1513273404.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:25.331Z,1513273405.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:25.700Z,1513273405.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:26.149Z,1513273406.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:26.518Z,1513273406.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:26.972Z,1513273406.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:27.312Z,1513273407.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:27.711Z,1513273407.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:28.111Z,1513273408.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:28.507Z,1513273408.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:28.889Z,1513273408.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:29.317Z,1513273409.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:29.723Z,1513273409.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:30.164Z,1513273410.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:30.491Z,1513273410.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:30.914Z,1513273410.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:31.292Z,1513273411.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:31.688Z,1513273411.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:32.119Z,1513273412.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:32.518Z,1513273412.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:32.918Z,1513273412.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:33.292Z,1513273413.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:33.699Z,1513273413.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:34.099Z,1513273414.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:34.531Z,1513273414.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:34.905Z,1513273414.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:35.310Z,1513273415.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:35.708Z,1513273415.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:36.111Z,1513273416.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:36.548Z,1513273416.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:36.907Z,1513273416.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:37.299Z,1513273417.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:37.702Z,1513273417.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:38.104Z,1513273418.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:38.523Z,1513273418.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:38.923Z,1513273418.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:39.296Z,1513273419.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:39.731Z,1513273419.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:40.108Z,1513273420.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:40.506Z,1513273420.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:40.903Z,1513273420.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:41.319Z,1513273421.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:41.706Z,1513273421.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:42.111Z,1513273422.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:42.499Z,1513273422.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:42.989Z,1513273422.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:43.303Z,1513273423.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:43.708Z,1513273423.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:44.119Z,1513273424.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:44.519Z,1513273424.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:48.059Z,1513273428.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:48.173Z,1513273428.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:48.571Z,1513273428.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:48.944Z,1513273428.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:49.395Z,1513273429.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:49.747Z,1513273429.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:50.149Z,1513273430.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:50.552Z,1513273430.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:50.949Z,1513273430.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:51.352Z,1513273431.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:51.746Z,1513273431.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:52.158Z,1513273432.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:52.579Z,1513273432.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:52.955Z,1513273432.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:53.359Z,1513273433.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:53.767Z,1513273433.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:54.152Z,1513273434.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:54.553Z,1513273434.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:54.991Z,1513273434.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:55.345Z,1513273435.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:55.787Z,1513273435.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:56.148Z,1513273436.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:56.574Z,1513273436.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:56.945Z,1513273436.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:57.344Z,1513273437.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:57.775Z,1513273437.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:58.143Z,1513273438.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:58.543Z,1513273438.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:58.986Z,1513273438.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:59.355Z,1513273439.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:43:59.749Z,1513273439.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:00.150Z,1513273440.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:00.544Z,1513273440.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:00.946Z,1513273440.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:01.351Z,1513273441.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:01.748Z,1513273441.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:02.240Z,1513273442.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:02.554Z,1513273442.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:02.998Z,1513273442.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:03.348Z,1513273443.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:03.752Z,1513273443.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:04.147Z,1513273444.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:04.552Z,1513273444.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:04.947Z,1513273444.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:05.395Z,1513273445.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:05.763Z,1513273445.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:06.152Z,1513273446.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:06.544Z,1513273446.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:06.953Z,1513273446.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:07.346Z,1513273447.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:07.751Z,1513273447.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:08.158Z,1513273448.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:08.592Z,1513273448.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:08.959Z,1513273448.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:09.345Z,1513273449.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:09.779Z,1513273449.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:10.145Z,1513273450.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:10.571Z,1513273450.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:10.958Z,1513273450.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:11.384Z,1513273451.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:11.802Z,1513273451.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:12.153Z,1513273452.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:12.551Z,1513273452.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:12.950Z,1513273452.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:13.353Z,1513273453.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:13.753Z,1513273453.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:14.162Z,1513273454.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:14.557Z,1513273454.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:14.979Z,1513273454.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:15.355Z,1513273455.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:15.753Z,1513273455.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:16.153Z,1513273456.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:16.548Z,1513273456.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:16.963Z,1513273456.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:17.356Z,1513273457.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:17.814Z,1513273457.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:18.203Z,1513273458.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:18.555Z,1513273458.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:18.939Z,1513273458.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:19.340Z,1513273459.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:19.776Z,1513273459.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:20.169Z,1513273460.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:20.559Z,1513273460.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:20.959Z,1513273460.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:21.423Z,1513273461.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:21.744Z,1513273461.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:22.142Z,1513273462.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:22.543Z,1513273462.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:22.944Z,1513273462.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:23.351Z,1513273463.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:23.777Z,1513273463.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:24.145Z,1513273464.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:24.594Z,1513273464.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:24.944Z,1513273464.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:25.343Z,1513273465.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:25.742Z,1513273465.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:26.172Z,1513273466.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:26.549Z,1513273466.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:26.974Z,1513273466.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:27.343Z,1513273467.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:27.743Z,1513273467.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:28.144Z,1513273468.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:28.546Z,1513273468.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:28.947Z,1513273468.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:29.352Z,1513273469.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:29.756Z,1513273469.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:30.202Z,1513273470.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:30.551Z,1513273470.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:31.001Z,1513273471.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:31.351Z,1513273471.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:31.771Z,1513273471.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:32.157Z,1513273472.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:32.594Z,1513273472.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:32.960Z,1513273472.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:33.395Z,1513273473.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:33.751Z,1513273473.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:34.167Z,1513273474.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:34.568Z,1513273474.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:34.942Z,1513273474.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:35.368Z,1513273475.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:35.867Z,1513273475.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:35.867Z,1513273475.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 343
2017-12-14T17:44:35.867Z,1513273475.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:44:35.869Z,1513273475.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:35.870Z,1513273475.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 343
2017-12-14T17:44:35.870Z,1513273475.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:44:35.875Z,1513273475.875 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:35.875Z,1513273475.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 343
2017-12-14T17:44:35.875Z,1513273475.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:44:35.888Z,1513273475.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:44:35.888Z,1513273475.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:44:35.888Z,1513273475.888 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:44:36.173Z,1513273476.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:44:36.173Z,1513273476.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 343
2017-12-14T17:44:36.174Z,1513273476.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:44:36.174Z,1513273476.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 343
2017-12-14T17:44:36.174Z,1513273476.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:44:36.174Z,1513273476.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 343
2017-12-14T17:44:36.549Z,1513273476.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:44:36.549Z,1513273476.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:44:36.550Z,1513273476.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:44:36.550Z,1513273476.550 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:44:36.551Z,1513273476.551 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:44:36.551Z,1513273476.551 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:44:36.551Z,1513273476.551 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:44:36.552Z,1513273476.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:44:36.552Z,1513273476.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:44:36.951Z,1513273476.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:37.406Z,1513273477.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:37.763Z,1513273477.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:38.156Z,1513273478.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:38.564Z,1513273478.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:38.963Z,1513273478.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:39.335Z,1513273479.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:39.759Z,1513273479.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:40.138Z,1513273480.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:40.626Z,1513273480.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:41.034Z,1513273481.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:41.368Z,1513273481.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:41.794Z,1513273481.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:42.174Z,1513273482.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:42.541Z,1513273482.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:42.943Z,1513273482.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:43.346Z,1513273483.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:43.783Z,1513273483.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:44.148Z,1513273484.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:44.549Z,1513273484.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:48.047Z,1513273488.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:48.176Z,1513273488.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:48.555Z,1513273488.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:48.955Z,1513273488.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:49.349Z,1513273489.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:49.759Z,1513273489.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:50.180Z,1513273490.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:50.552Z,1513273490.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:50.956Z,1513273490.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:51.348Z,1513273491.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:51.750Z,1513273491.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:52.151Z,1513273492.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:52.567Z,1513273492.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:52.919Z,1513273492.919 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T17:44:52.920Z,1513273492.920 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T17:44:52.920Z,1513273492.920 [DropWeight](ERROR): Hardware Fault
2017-12-14T17:44:52.981Z,1513273492.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:53.001Z,1513273493.001 [CBIT](INFO): Critical error at 20171214T174452
2017-12-14T17:44:53.003Z,1513273493.003 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T17:44:53.004Z,1513273493.004 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T17:44:53.367Z,1513273493.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:53.411Z,1513273493.411 [CBIT](INFO): Critical error at 20171214T174453
2017-12-14T17:44:53.810Z,1513273493.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:54.167Z,1513273494.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:54.575Z,1513273494.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:54.956Z,1513273494.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:55.347Z,1513273495.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:55.767Z,1513273495.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:56.161Z,1513273496.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:56.611Z,1513273496.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:56.958Z,1513273496.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:57.355Z,1513273497.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:57.747Z,1513273497.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:58.155Z,1513273498.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:58.554Z,1513273498.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:58.954Z,1513273498.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:59.357Z,1513273499.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:44:59.811Z,1513273499.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:00.161Z,1513273500.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:00.555Z,1513273500.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:00.955Z,1513273500.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:01.353Z,1513273501.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:01.756Z,1513273501.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:02.158Z,1513273502.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:02.571Z,1513273502.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:02.973Z,1513273502.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:03.360Z,1513273503.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:03.740Z,1513273503.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:04.147Z,1513273504.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:04.542Z,1513273504.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:04.984Z,1513273504.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:05.310Z,1513273505.310 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:45:05.311Z,1513273505.311 [NAL9602] Data Fault, FailCount= 4
2017-12-14T17:45:05.311Z,1513273505.311 [NAL9602](ERROR): Data Fault
2017-12-14T17:45:05.347Z,1513273505.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:05.393Z,1513273505.393 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:45:05.710Z,1513273505.710 [NAL9602](INFO): Powering down
2017-12-14T17:45:05.743Z,1513273505.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:06.194Z,1513273506.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:06.551Z,1513273506.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:06.593Z,1513273506.593 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:45:06.594Z,1513273506.594 [NAL9602] No Fault, FailCount= 4
2017-12-14T17:45:06.943Z,1513273506.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:07.347Z,1513273507.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:07.746Z,1513273507.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:08.146Z,1513273508.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:08.545Z,1513273508.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:08.946Z,1513273508.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:09.428Z,1513273509.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:09.747Z,1513273509.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:10.176Z,1513273510.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:10.547Z,1513273510.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:10.947Z,1513273510.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:11.351Z,1513273511.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:11.747Z,1513273511.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:12.151Z,1513273512.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:12.631Z,1513273512.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:12.948Z,1513273512.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:13.346Z,1513273513.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:13.747Z,1513273513.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:14.147Z,1513273514.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:14.559Z,1513273514.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:14.950Z,1513273514.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:15.352Z,1513273515.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:15.835Z,1513273515.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:16.148Z,1513273516.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:16.543Z,1513273516.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:16.990Z,1513273516.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:17.347Z,1513273517.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:17.775Z,1513273517.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:18.151Z,1513273518.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:18.582Z,1513273518.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:18.947Z,1513273518.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:19.357Z,1513273519.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:19.740Z,1513273519.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:20.142Z,1513273520.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:20.547Z,1513273520.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:20.951Z,1513273520.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:21.337Z,1513273521.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:21.743Z,1513273521.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:22.220Z,1513273522.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:22.544Z,1513273522.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:22.948Z,1513273522.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:23.348Z,1513273523.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:23.740Z,1513273523.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:24.150Z,1513273524.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:24.551Z,1513273524.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:24.950Z,1513273524.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:25.388Z,1513273525.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:25.756Z,1513273525.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:26.154Z,1513273526.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:26.553Z,1513273526.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:26.972Z,1513273526.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:27.349Z,1513273527.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:27.751Z,1513273527.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:28.147Z,1513273528.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:28.558Z,1513273528.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:28.953Z,1513273528.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:29.347Z,1513273529.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:29.751Z,1513273529.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:30.154Z,1513273530.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:30.555Z,1513273530.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:30.966Z,1513273530.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:31.334Z,1513273531.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:31.813Z,1513273531.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:32.142Z,1513273532.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:32.546Z,1513273532.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:32.951Z,1513273532.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:33.344Z,1513273533.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:33.743Z,1513273533.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:34.151Z,1513273534.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:34.551Z,1513273534.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:35.002Z,1513273535.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:35.348Z,1513273535.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:35.744Z,1513273535.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:36.106Z,1513273536.106 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:45:36.151Z,1513273536.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:36.563Z,1513273536.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:36.948Z,1513273536.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:37.356Z,1513273537.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:37.775Z,1513273537.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:38.191Z,1513273538.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:38.572Z,1513273538.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:38.964Z,1513273538.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:39.375Z,1513273539.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:39.743Z,1513273539.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:40.178Z,1513273540.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:40.542Z,1513273540.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:40.945Z,1513273540.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:41.347Z,1513273541.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:41.746Z,1513273541.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:42.144Z,1513273542.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:42.574Z,1513273542.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:42.944Z,1513273542.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:43.346Z,1513273543.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:43.745Z,1513273543.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:44.152Z,1513273544.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:44.599Z,1513273544.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:48.095Z,1513273548.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:48.263Z,1513273548.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:48.526Z,1513273548.526 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:45:48.563Z,1513273548.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:48.968Z,1513273548.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:49.372Z,1513273549.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:49.796Z,1513273549.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:50.185Z,1513273550.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:50.575Z,1513273550.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:50.980Z,1513273550.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:51.375Z,1513273551.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:51.778Z,1513273551.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:52.176Z,1513273552.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:52.577Z,1513273552.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:52.969Z,1513273552.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:53.388Z,1513273553.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:53.790Z,1513273553.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:54.215Z,1513273554.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:54.587Z,1513273554.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:54.985Z,1513273554.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:55.394Z,1513273555.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:55.794Z,1513273555.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:56.189Z,1513273556.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:56.570Z,1513273556.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:56.964Z,1513273556.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:57.410Z,1513273557.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:57.773Z,1513273557.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:58.197Z,1513273558.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:58.572Z,1513273558.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:59.006Z,1513273559.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:59.376Z,1513273559.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:45:59.775Z,1513273559.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:00.183Z,1513273560.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:00.623Z,1513273560.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:01.005Z,1513273561.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:01.382Z,1513273561.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:01.781Z,1513273561.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:02.211Z,1513273562.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:02.575Z,1513273562.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:03.010Z,1513273563.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:03.375Z,1513273563.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:03.839Z,1513273563.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:04.177Z,1513273564.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:04.574Z,1513273564.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:05.090Z,1513273565.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:05.380Z,1513273565.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:05.779Z,1513273565.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:06.180Z,1513273566.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:06.573Z,1513273566.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:07.008Z,1513273567.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:07.378Z,1513273567.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:07.780Z,1513273567.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:08.187Z,1513273568.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:08.572Z,1513273568.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:08.983Z,1513273568.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:09.387Z,1513273569.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:09.786Z,1513273569.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:10.230Z,1513273570.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:10.577Z,1513273570.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:10.992Z,1513273570.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:11.402Z,1513273571.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:11.782Z,1513273571.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:12.191Z,1513273572.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:12.586Z,1513273572.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:12.977Z,1513273572.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:13.431Z,1513273573.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:13.778Z,1513273573.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:14.177Z,1513273574.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:14.584Z,1513273574.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:14.986Z,1513273574.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:15.387Z,1513273575.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:15.783Z,1513273575.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:16.171Z,1513273576.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:16.616Z,1513273576.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:16.975Z,1513273576.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:17.376Z,1513273577.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:17.783Z,1513273577.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:18.208Z,1513273578.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:18.589Z,1513273578.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:18.967Z,1513273578.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:19.379Z,1513273579.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:19.878Z,1513273579.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:20.192Z,1513273580.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:20.585Z,1513273580.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:20.963Z,1513273580.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:21.398Z,1513273581.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:21.812Z,1513273581.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:22.203Z,1513273582.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:22.655Z,1513273582.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:22.977Z,1513273582.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:23.443Z,1513273583.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:23.802Z,1513273583.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:24.234Z,1513273584.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:24.592Z,1513273584.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:25.003Z,1513273585.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:25.383Z,1513273585.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:25.802Z,1513273585.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:26.207Z,1513273586.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:26.564Z,1513273586.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:26.986Z,1513273586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:27.408Z,1513273587.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:27.788Z,1513273587.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:28.179Z,1513273588.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:28.594Z,1513273588.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:28.971Z,1513273588.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:29.394Z,1513273589.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:29.792Z,1513273589.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:30.186Z,1513273590.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:30.572Z,1513273590.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:31.004Z,1513273591.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:31.403Z,1513273591.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:31.795Z,1513273591.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:32.307Z,1513273592.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:32.579Z,1513273592.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:32.980Z,1513273592.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:33.403Z,1513273593.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:33.810Z,1513273593.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:34.201Z,1513273594.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:34.599Z,1513273594.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:34.994Z,1513273594.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:35.391Z,1513273595.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:35.799Z,1513273595.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:36.215Z,1513273596.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:36.618Z,1513273596.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:36.972Z,1513273596.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:37.402Z,1513273597.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:37.807Z,1513273597.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:38.209Z,1513273598.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:38.583Z,1513273598.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:38.979Z,1513273598.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:39.427Z,1513273599.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:39.792Z,1513273599.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:40.186Z,1513273600.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:40.598Z,1513273600.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:40.971Z,1513273600.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:41.411Z,1513273601.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:41.830Z,1513273601.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:42.207Z,1513273602.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:42.621Z,1513273602.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:42.974Z,1513273602.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:43.393Z,1513273603.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:43.797Z,1513273603.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:44.187Z,1513273604.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:44.584Z,1513273604.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:51.526Z,1513273611.526 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:46:51.526Z,1513273611.526 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:46:51.526Z,1513273611.526 [BPC1](ERROR): Communications Fault
2017-12-14T17:46:51.542Z,1513273611.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:51.601Z,1513273611.601 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:46:51.739Z,1513273611.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:52.114Z,1513273612.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:52.508Z,1513273612.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:52.559Z,1513273612.559 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:46:52.559Z,1513273612.559 [BPC1] No Fault, FailCount= 1
2017-12-14T17:46:52.963Z,1513273612.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:53.280Z,1513273613.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:53.667Z,1513273613.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:54.064Z,1513273614.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:54.463Z,1513273614.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:54.876Z,1513273614.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:55.277Z,1513273615.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:55.670Z,1513273615.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:56.097Z,1513273616.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:56.467Z,1513273616.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:56.861Z,1513273616.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:57.261Z,1513273617.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:57.672Z,1513273617.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:58.106Z,1513273618.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:58.464Z,1513273618.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:58.965Z,1513273618.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:59.320Z,1513273619.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:46:59.664Z,1513273619.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:00.065Z,1513273620.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:00.474Z,1513273620.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:00.870Z,1513273620.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:01.302Z,1513273621.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:01.660Z,1513273621.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:02.063Z,1513273622.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:02.512Z,1513273622.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:02.860Z,1513273622.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:03.271Z,1513273623.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:03.675Z,1513273623.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:04.079Z,1513273624.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:04.468Z,1513273624.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:04.906Z,1513273624.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:05.270Z,1513273625.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:05.729Z,1513273625.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:06.067Z,1513273626.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:06.479Z,1513273626.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:06.883Z,1513273626.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:07.275Z,1513273627.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:07.674Z,1513273627.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:08.051Z,1513273628.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:08.470Z,1513273628.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:08.908Z,1513273628.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:09.282Z,1513273629.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:09.687Z,1513273629.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:10.086Z,1513273630.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:10.485Z,1513273630.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:10.857Z,1513273630.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:11.259Z,1513273631.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:11.660Z,1513273631.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:12.139Z,1513273632.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:12.487Z,1513273632.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:12.886Z,1513273632.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:13.268Z,1513273633.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:13.751Z,1513273633.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:14.063Z,1513273634.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:14.495Z,1513273634.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:14.864Z,1513273634.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:15.323Z,1513273635.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:15.667Z,1513273635.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:16.072Z,1513273636.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:16.469Z,1513273636.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:16.863Z,1513273636.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:17.269Z,1513273637.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:17.663Z,1513273637.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:18.058Z,1513273638.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:18.525Z,1513273638.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:18.873Z,1513273638.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:19.270Z,1513273639.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:19.667Z,1513273639.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:20.095Z,1513273640.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:20.469Z,1513273640.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:20.854Z,1513273640.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:21.257Z,1513273641.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:21.737Z,1513273641.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:22.091Z,1513273642.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:22.476Z,1513273642.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:22.866Z,1513273642.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:23.263Z,1513273643.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:23.755Z,1513273643.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:24.058Z,1513273644.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:24.495Z,1513273644.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:24.913Z,1513273644.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:25.275Z,1513273645.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:25.668Z,1513273645.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:26.103Z,1513273646.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:26.466Z,1513273646.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:26.863Z,1513273646.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:27.265Z,1513273647.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:27.669Z,1513273647.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:28.118Z,1513273648.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:28.472Z,1513273648.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:28.862Z,1513273648.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:29.256Z,1513273649.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:29.666Z,1513273649.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:30.075Z,1513273650.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:30.487Z,1513273650.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:30.873Z,1513273650.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:31.274Z,1513273651.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:31.663Z,1513273651.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:32.063Z,1513273652.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:32.466Z,1513273652.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:32.869Z,1513273652.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:33.271Z,1513273653.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:33.673Z,1513273653.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:34.073Z,1513273654.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:34.524Z,1513273654.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:34.867Z,1513273654.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:35.273Z,1513273655.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:35.736Z,1513273655.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.055Z,1513273656.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.480Z,1513273656.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.911Z,1513273656.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.911Z,1513273656.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 344
2017-12-14T17:47:36.911Z,1513273656.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:47:36.913Z,1513273656.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.914Z,1513273656.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 344
2017-12-14T17:47:36.914Z,1513273656.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:47:36.915Z,1513273656.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:36.916Z,1513273656.916 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 344
2017-12-14T17:47:36.916Z,1513273656.916 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:47:36.971Z,1513273656.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:47:36.971Z,1513273656.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:47:36.971Z,1513273656.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:47:37.284Z,1513273657.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:47:37.284Z,1513273657.284 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 344
2017-12-14T17:47:37.289Z,1513273657.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:47:37.289Z,1513273657.289 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 344
2017-12-14T17:47:37.289Z,1513273657.289 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:47:37.290Z,1513273657.290 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 344
2017-12-14T17:47:37.742Z,1513273657.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:47:37.743Z,1513273657.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:47:37.743Z,1513273657.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:47:37.744Z,1513273657.744 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:47:37.744Z,1513273657.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:47:37.744Z,1513273657.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:47:37.749Z,1513273657.749 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:47:37.750Z,1513273657.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:47:37.750Z,1513273657.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:47:38.060Z,1513273658.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:38.471Z,1513273658.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:38.863Z,1513273658.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:39.280Z,1513273659.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:39.670Z,1513273659.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:40.086Z,1513273660.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:40.470Z,1513273660.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:40.884Z,1513273660.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:41.268Z,1513273661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:41.665Z,1513273661.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:42.058Z,1513273662.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:42.469Z,1513273662.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:42.879Z,1513273662.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:43.279Z,1513273663.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:43.662Z,1513273663.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:44.131Z,1513273664.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:44.139Z,1513273664.139 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:47:44.139Z,1513273664.139 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:47:44.139Z,1513273664.139 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:47:44.139Z,1513273664.139 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:47:44.483Z,1513273664.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:44.486Z,1513273664.486 [Default:CheckIn:D] Stopped
2017-12-14T17:47:44.487Z,1513273664.487 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:47:44.866Z,1513273664.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:44.869Z,1513273664.869 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1034.484961 min 
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn:E] Stopped
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn] Stopped
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn](INFO): Running loop #100
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn] Running Loop=100
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:47:44.870Z,1513273664.870 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:47:48.487Z,1513273668.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:48.647Z,1513273668.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:48.990Z,1513273668.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:49.389Z,1513273669.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:49.782Z,1513273669.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:50.180Z,1513273670.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:50.583Z,1513273670.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:50.978Z,1513273670.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:51.389Z,1513273671.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:51.791Z,1513273671.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:52.186Z,1513273672.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:52.584Z,1513273672.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:52.987Z,1513273672.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:53.434Z,1513273673.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:53.799Z,1513273673.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:54.193Z,1513273674.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:54.579Z,1513273674.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:54.968Z,1513273674.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:55.398Z,1513273675.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:55.799Z,1513273675.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:56.203Z,1513273676.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:56.587Z,1513273676.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:56.979Z,1513273676.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:57.389Z,1513273677.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:57.534Z,1513273677.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:47:57.795Z,1513273677.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:58.199Z,1513273678.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:58.330Z,1513273678.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:47:58.582Z,1513273678.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:58.733Z,1513273678.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:47:58.991Z,1513273678.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:59.395Z,1513273679.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:47:59.839Z,1513273679.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:00.195Z,1513273680.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:00.610Z,1513273680.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:00.990Z,1513273680.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:01.399Z,1513273681.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:01.835Z,1513273681.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:02.195Z,1513273682.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:02.604Z,1513273682.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:02.985Z,1513273682.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:03.419Z,1513273683.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:03.814Z,1513273683.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:04.196Z,1513273684.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:04.591Z,1513273684.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:04.999Z,1513273684.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:05.380Z,1513273685.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:05.811Z,1513273685.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:06.227Z,1513273686.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:06.579Z,1513273686.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:06.979Z,1513273686.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:07.403Z,1513273687.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:07.797Z,1513273687.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:08.211Z,1513273688.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:08.582Z,1513273688.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:08.979Z,1513273688.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:09.455Z,1513273689.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:09.809Z,1513273689.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:10.197Z,1513273690.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:10.591Z,1513273690.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:11.019Z,1513273691.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:11.384Z,1513273691.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:11.526Z,1513273691.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:11.785Z,1513273691.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:12.191Z,1513273692.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:12.322Z,1513273692.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:12.638Z,1513273692.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:12.730Z,1513273692.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:12.978Z,1513273692.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:13.388Z,1513273693.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:13.788Z,1513273693.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:14.217Z,1513273694.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:14.582Z,1513273694.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:14.984Z,1513273694.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:15.400Z,1513273695.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:15.851Z,1513273695.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:16.194Z,1513273696.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:16.579Z,1513273696.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:16.997Z,1513273696.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:17.393Z,1513273697.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:17.799Z,1513273697.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:18.192Z,1513273698.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:18.592Z,1513273698.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:18.970Z,1513273698.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:19.393Z,1513273699.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:19.811Z,1513273699.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:20.192Z,1513273700.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:20.577Z,1513273700.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:20.978Z,1513273700.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:21.404Z,1513273701.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:21.831Z,1513273701.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:22.208Z,1513273702.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:22.580Z,1513273702.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:22.987Z,1513273702.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:23.423Z,1513273703.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:23.784Z,1513273703.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:24.223Z,1513273704.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:24.591Z,1513273704.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:25.022Z,1513273705.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:25.428Z,1513273705.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:25.542Z,1513273705.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:25.794Z,1513273705.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:26.205Z,1513273706.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:26.338Z,1513273706.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:26.596Z,1513273706.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:26.741Z,1513273706.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:48:26.982Z,1513273706.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:27.390Z,1513273707.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:27.793Z,1513273707.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:28.191Z,1513273708.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:28.625Z,1513273708.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:28.996Z,1513273708.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:29.400Z,1513273709.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:29.802Z,1513273709.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:30.192Z,1513273710.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:30.577Z,1513273710.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:30.981Z,1513273710.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:31.406Z,1513273711.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:31.820Z,1513273711.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:32.187Z,1513273712.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:32.588Z,1513273712.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:32.978Z,1513273712.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:33.415Z,1513273713.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:33.809Z,1513273713.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:34.187Z,1513273714.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:34.587Z,1513273714.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:34.982Z,1513273714.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:35.413Z,1513273715.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:35.784Z,1513273715.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:36.188Z,1513273716.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:36.581Z,1513273716.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:36.978Z,1513273716.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:37.389Z,1513273717.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:37.789Z,1513273717.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:38.243Z,1513273718.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:38.590Z,1513273718.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:38.985Z,1513273718.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:39.394Z,1513273719.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:39.799Z,1513273719.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:40.205Z,1513273720.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:40.597Z,1513273720.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:40.975Z,1513273720.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:41.407Z,1513273721.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:41.807Z,1513273721.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:42.200Z,1513273722.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:42.599Z,1513273722.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:42.983Z,1513273722.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:43.384Z,1513273723.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:43.803Z,1513273723.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:44.219Z,1513273724.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:44.620Z,1513273724.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:44.985Z,1513273724.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:48.507Z,1513273728.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:48.663Z,1513273728.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:49.008Z,1513273729.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:49.413Z,1513273729.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:49.809Z,1513273729.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:50.235Z,1513273730.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:50.615Z,1513273730.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:51.071Z,1513273731.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:51.420Z,1513273731.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:51.809Z,1513273731.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:52.210Z,1513273732.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:52.608Z,1513273732.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:53.023Z,1513273733.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:53.422Z,1513273733.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:53.831Z,1513273733.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:54.320Z,1513273734.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:54.608Z,1513273734.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:55.003Z,1513273735.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:55.416Z,1513273735.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:55.809Z,1513273735.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:56.212Z,1513273736.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:56.604Z,1513273736.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:57.016Z,1513273737.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:57.415Z,1513273737.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:57.820Z,1513273737.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:58.213Z,1513273738.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:58.611Z,1513273738.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:59.011Z,1513273739.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:59.447Z,1513273739.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:48:59.818Z,1513273739.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:00.215Z,1513273740.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:00.658Z,1513273740.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:01.003Z,1513273741.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:01.423Z,1513273741.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:01.817Z,1513273741.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:02.225Z,1513273742.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:02.601Z,1513273742.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:03.004Z,1513273743.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:03.430Z,1513273743.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:03.859Z,1513273743.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:04.209Z,1513273744.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:04.610Z,1513273744.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:05.004Z,1513273745.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:05.409Z,1513273745.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:05.812Z,1513273745.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:06.209Z,1513273746.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:06.618Z,1513273746.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:07.011Z,1513273747.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:07.419Z,1513273747.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:07.825Z,1513273747.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:08.218Z,1513273748.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:08.603Z,1513273748.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:09.003Z,1513273749.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:09.431Z,1513273749.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:09.834Z,1513273749.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:10.292Z,1513273750.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:10.600Z,1513273750.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:11.007Z,1513273751.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:11.458Z,1513273751.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:11.809Z,1513273751.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:12.208Z,1513273752.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:12.655Z,1513273752.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:13.015Z,1513273753.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:13.483Z,1513273753.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:13.807Z,1513273753.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:14.233Z,1513273754.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:14.607Z,1513273754.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:15.011Z,1513273755.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:15.412Z,1513273755.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:15.820Z,1513273755.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:16.214Z,1513273756.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:16.626Z,1513273756.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:17.003Z,1513273757.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:17.404Z,1513273757.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:17.827Z,1513273757.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:18.204Z,1513273758.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:18.600Z,1513273758.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:19.003Z,1513273759.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:19.428Z,1513273759.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:19.856Z,1513273759.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:20.233Z,1513273760.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:20.602Z,1513273760.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:21.008Z,1513273761.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:21.415Z,1513273761.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:21.841Z,1513273761.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:22.219Z,1513273762.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:22.618Z,1513273762.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:23.067Z,1513273763.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:23.423Z,1513273763.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:23.820Z,1513273763.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:24.213Z,1513273764.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:24.614Z,1513273764.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:25.017Z,1513273765.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:25.424Z,1513273765.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:25.821Z,1513273765.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:26.271Z,1513273766.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:26.620Z,1513273766.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:27.016Z,1513273767.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:27.423Z,1513273767.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:27.819Z,1513273767.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:28.215Z,1513273768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:28.614Z,1513273768.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:28.994Z,1513273768.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:29.434Z,1513273769.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:29.478Z,1513273769.478 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:49:29.831Z,1513273769.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:30.271Z,1513273770.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:30.605Z,1513273770.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:31.011Z,1513273771.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:31.439Z,1513273771.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:31.809Z,1513273771.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:32.233Z,1513273772.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:32.635Z,1513273772.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:33.007Z,1513273773.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:33.412Z,1513273773.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:33.813Z,1513273773.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:34.314Z,1513273774.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:34.606Z,1513273774.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:35.032Z,1513273775.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:35.432Z,1513273775.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:35.847Z,1513273775.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:36.211Z,1513273776.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:36.625Z,1513273776.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:37.015Z,1513273777.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:37.418Z,1513273777.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:37.819Z,1513273777.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:38.228Z,1513273778.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:38.616Z,1513273778.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:39.016Z,1513273779.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:39.419Z,1513273779.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:39.822Z,1513273779.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:40.216Z,1513273780.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:40.620Z,1513273780.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:41.031Z,1513273781.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:41.427Z,1513273781.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:41.822Z,1513273781.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:42.199Z,1513273782.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:42.629Z,1513273782.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:43.007Z,1513273783.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:43.434Z,1513273783.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:43.831Z,1513273783.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:44.263Z,1513273784.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:44.612Z,1513273784.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:45.005Z,1513273785.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:48.533Z,1513273788.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:48.636Z,1513273788.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:49.040Z,1513273789.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:49.438Z,1513273789.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:49.836Z,1513273789.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:50.211Z,1513273790.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:50.620Z,1513273790.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:51.016Z,1513273791.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:51.424Z,1513273791.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:51.827Z,1513273791.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:52.275Z,1513273792.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:52.622Z,1513273792.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:53.018Z,1513273793.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:53.427Z,1513273793.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:53.816Z,1513273793.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:54.228Z,1513273794.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:54.633Z,1513273794.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:55.063Z,1513273795.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:55.483Z,1513273795.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:55.822Z,1513273795.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:56.223Z,1513273796.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:56.650Z,1513273796.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:57.023Z,1513273797.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:57.467Z,1513273797.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:57.829Z,1513273797.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:58.266Z,1513273798.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:58.621Z,1513273798.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:59.026Z,1513273799.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:59.428Z,1513273799.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:49:59.832Z,1513273799.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:00.227Z,1513273800.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:00.619Z,1513273800.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:01.032Z,1513273801.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:01.432Z,1513273801.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:01.854Z,1513273801.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:02.232Z,1513273802.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:02.617Z,1513273802.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:03.018Z,1513273803.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:03.416Z,1513273803.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:03.816Z,1513273803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:04.223Z,1513273804.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:04.623Z,1513273804.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:05.092Z,1513273805.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:05.423Z,1513273805.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:05.814Z,1513273805.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:06.214Z,1513273806.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:06.647Z,1513273806.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:07.018Z,1513273807.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:07.421Z,1513273807.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:07.828Z,1513273807.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:08.297Z,1513273808.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:08.623Z,1513273808.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:09.023Z,1513273809.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:09.426Z,1513273809.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:09.820Z,1513273809.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:10.213Z,1513273810.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:10.629Z,1513273810.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:11.028Z,1513273811.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:11.459Z,1513273811.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:11.827Z,1513273811.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:12.227Z,1513273812.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:12.618Z,1513273812.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:13.021Z,1513273813.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:13.425Z,1513273813.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:13.830Z,1513273813.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:14.226Z,1513273814.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:14.617Z,1513273814.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:15.031Z,1513273815.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:15.425Z,1513273815.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:15.835Z,1513273815.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:16.237Z,1513273816.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:16.620Z,1513273816.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:17.018Z,1513273817.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:17.424Z,1513273817.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:17.875Z,1513273817.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:18.227Z,1513273818.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:18.647Z,1513273818.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:19.019Z,1513273819.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:19.428Z,1513273819.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:19.819Z,1513273819.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:20.224Z,1513273820.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:20.636Z,1513273820.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:21.045Z,1513273821.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:21.439Z,1513273821.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:21.805Z,1513273821.805 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:50:21.805Z,1513273821.805 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:50:21.805Z,1513273821.805 [BPC1](ERROR): Communications Fault
2017-12-14T17:50:21.836Z,1513273821.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:21.862Z,1513273821.862 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:50:22.216Z,1513273822.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:22.615Z,1513273822.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:23.013Z,1513273823.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:23.059Z,1513273823.059 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:50:23.059Z,1513273823.059 [BPC1] No Fault, FailCount= 1
2017-12-14T17:50:23.487Z,1513273823.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:23.843Z,1513273823.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:24.262Z,1513273824.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:24.619Z,1513273824.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:25.015Z,1513273825.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:25.415Z,1513273825.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:25.816Z,1513273825.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:26.219Z,1513273826.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:26.617Z,1513273826.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:27.027Z,1513273827.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:27.475Z,1513273827.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:27.819Z,1513273827.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:28.216Z,1513273828.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:28.614Z,1513273828.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:29.014Z,1513273829.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:29.419Z,1513273829.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:29.831Z,1513273829.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:30.219Z,1513273830.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:30.640Z,1513273830.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:31.030Z,1513273831.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:31.429Z,1513273831.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:31.875Z,1513273831.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:32.235Z,1513273832.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:32.642Z,1513273832.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:33.014Z,1513273833.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:33.414Z,1513273833.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:33.891Z,1513273833.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:34.216Z,1513273834.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:34.628Z,1513273834.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:35.074Z,1513273835.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:35.436Z,1513273835.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:35.817Z,1513273835.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:36.239Z,1513273836.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:36.621Z,1513273836.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.018Z,1513273837.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.443Z,1513273837.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.834Z,1513273837.834 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.834Z,1513273837.834 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 345
2017-12-14T17:50:37.834Z,1513273837.834 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:50:37.836Z,1513273837.836 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.836Z,1513273837.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 345
2017-12-14T17:50:37.836Z,1513273837.836 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:50:37.838Z,1513273837.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:37.838Z,1513273837.838 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 345
2017-12-14T17:50:37.838Z,1513273837.838 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:50:37.851Z,1513273837.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:50:37.851Z,1513273837.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:50:37.851Z,1513273837.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:50:38.243Z,1513273838.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:50:38.243Z,1513273838.243 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 345
2017-12-14T17:50:38.244Z,1513273838.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:50:38.244Z,1513273838.244 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 345
2017-12-14T17:50:38.244Z,1513273838.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:50:38.257Z,1513273838.257 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 345
2017-12-14T17:50:38.622Z,1513273838.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:50:38.622Z,1513273838.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:50:38.623Z,1513273838.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:50:38.623Z,1513273838.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:50:38.623Z,1513273838.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:50:38.624Z,1513273838.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:50:38.624Z,1513273838.624 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:50:38.624Z,1513273838.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:50:38.625Z,1513273838.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:50:39.019Z,1513273839.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:39.419Z,1513273839.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:39.823Z,1513273839.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:40.244Z,1513273840.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:40.638Z,1513273840.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:41.036Z,1513273841.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:41.433Z,1513273841.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:41.832Z,1513273841.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:42.237Z,1513273842.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:42.626Z,1513273842.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:43.029Z,1513273843.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:43.436Z,1513273843.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:43.867Z,1513273843.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:44.217Z,1513273844.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:44.626Z,1513273844.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:45.058Z,1513273845.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:48.559Z,1513273848.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:48.731Z,1513273848.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:49.056Z,1513273849.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:49.435Z,1513273849.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:49.864Z,1513273849.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:50.241Z,1513273850.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:50.650Z,1513273850.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:51.052Z,1513273851.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:51.451Z,1513273851.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:51.846Z,1513273851.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:52.249Z,1513273852.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:52.631Z,1513273852.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:53.035Z,1513273853.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:53.439Z,1513273853.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:53.844Z,1513273853.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:54.272Z,1513273854.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:54.632Z,1513273854.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:55.034Z,1513273855.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:55.434Z,1513273855.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:55.835Z,1513273855.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:56.267Z,1513273856.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:56.641Z,1513273856.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:57.086Z,1513273857.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:57.449Z,1513273857.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:57.836Z,1513273857.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:58.237Z,1513273858.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:58.634Z,1513273858.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:59.031Z,1513273859.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:59.459Z,1513273859.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:50:59.863Z,1513273859.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:00.240Z,1513273860.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:00.641Z,1513273860.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:01.037Z,1513273861.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:01.434Z,1513273861.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:01.832Z,1513273861.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:02.235Z,1513273862.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:02.699Z,1513273862.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:03.051Z,1513273863.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:03.447Z,1513273863.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:03.840Z,1513273863.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:04.245Z,1513273864.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:04.631Z,1513273864.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:05.030Z,1513273865.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:05.450Z,1513273865.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:05.895Z,1513273865.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:06.247Z,1513273866.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:06.630Z,1513273866.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:07.029Z,1513273867.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:07.430Z,1513273867.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:07.835Z,1513273867.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:08.235Z,1513273868.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:08.640Z,1513273868.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:09.115Z,1513273869.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:09.447Z,1513273869.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:09.833Z,1513273869.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:10.271Z,1513273870.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:10.638Z,1513273870.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:11.055Z,1513273871.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:11.446Z,1513273871.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:11.844Z,1513273871.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:12.244Z,1513273872.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:12.656Z,1513273872.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:13.043Z,1513273873.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:13.425Z,1513273873.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:13.824Z,1513273873.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:14.223Z,1513273874.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:14.640Z,1513273874.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:15.040Z,1513273875.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:15.443Z,1513273875.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:15.830Z,1513273875.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:16.232Z,1513273876.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:16.635Z,1513273876.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:17.033Z,1513273877.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:17.443Z,1513273877.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:17.854Z,1513273877.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:18.263Z,1513273878.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:18.707Z,1513273878.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:19.028Z,1513273879.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:19.465Z,1513273879.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:19.879Z,1513273879.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:20.263Z,1513273880.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:20.709Z,1513273880.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:21.074Z,1513273881.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:21.487Z,1513273881.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:21.832Z,1513273881.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:22.248Z,1513273882.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:22.654Z,1513273882.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:23.048Z,1513273883.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:23.455Z,1513273883.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:23.856Z,1513273883.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:24.250Z,1513273884.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:24.651Z,1513273884.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:25.053Z,1513273885.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:25.479Z,1513273885.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:25.830Z,1513273885.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:26.332Z,1513273886.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:26.679Z,1513273886.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:27.044Z,1513273887.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:27.440Z,1513273887.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:27.839Z,1513273887.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:28.268Z,1513273888.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:28.668Z,1513273888.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:29.036Z,1513273889.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:29.455Z,1513273889.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:29.875Z,1513273889.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:30.297Z,1513273890.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:30.659Z,1513273890.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:31.109Z,1513273891.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:31.488Z,1513273891.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:31.857Z,1513273891.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:32.339Z,1513273892.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:32.651Z,1513273892.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:33.091Z,1513273893.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:33.472Z,1513273893.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:33.860Z,1513273893.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:34.262Z,1513273894.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:34.639Z,1513273894.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:35.032Z,1513273895.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:35.458Z,1513273895.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:35.867Z,1513273895.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:36.237Z,1513273896.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:36.639Z,1513273896.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:37.034Z,1513273897.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:37.434Z,1513273897.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:37.832Z,1513273897.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:38.230Z,1513273898.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:38.668Z,1513273898.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:39.036Z,1513273899.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:39.467Z,1513273899.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:39.832Z,1513273899.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:40.234Z,1513273900.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:40.636Z,1513273900.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:41.036Z,1513273901.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:41.486Z,1513273901.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:41.855Z,1513273901.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:42.246Z,1513273902.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:42.643Z,1513273902.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:43.038Z,1513273903.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:43.433Z,1513273903.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:43.835Z,1513273903.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:44.257Z,1513273904.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:44.674Z,1513273904.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:45.102Z,1513273905.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:49.016Z,1513273909.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:49.163Z,1513273909.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:49.520Z,1513273909.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:50.008Z,1513273910.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:50.346Z,1513273910.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:50.736Z,1513273910.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:51.147Z,1513273911.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:51.591Z,1513273911.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:51.916Z,1513273911.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:52.326Z,1513273912.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:52.721Z,1513273912.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:53.129Z,1513273913.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:53.555Z,1513273913.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:53.987Z,1513273913.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:54.394Z,1513273914.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:54.751Z,1513273914.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:55.152Z,1513273915.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:55.572Z,1513273915.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:55.944Z,1513273915.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:56.393Z,1513273916.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:56.725Z,1513273916.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:57.152Z,1513273917.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:57.520Z,1513273917.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:58.013Z,1513273918.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:58.327Z,1513273918.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:58.727Z,1513273918.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:59.118Z,1513273919.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:59.525Z,1513273919.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:51:59.985Z,1513273919.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:00.332Z,1513273920.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:00.720Z,1513273920.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:01.128Z,1513273921.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:01.528Z,1513273921.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:01.978Z,1513273921.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:02.327Z,1513273922.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:02.805Z,1513273922.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:03.135Z,1513273923.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:03.535Z,1513273923.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:03.991Z,1513273923.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:04.430Z,1513273924.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:04.733Z,1513273924.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:05.139Z,1513273925.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:05.539Z,1513273925.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:06.029Z,1513273926.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:06.355Z,1513273926.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:06.759Z,1513273926.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:07.153Z,1513273927.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:07.523Z,1513273927.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:07.963Z,1513273927.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:08.406Z,1513273928.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:08.739Z,1513273928.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:09.139Z,1513273929.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:09.539Z,1513273929.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:09.949Z,1513273929.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:10.419Z,1513273930.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:10.728Z,1513273930.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:11.167Z,1513273931.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:11.539Z,1513273931.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:12.046Z,1513273932.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:12.390Z,1513273932.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:12.747Z,1513273932.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:13.120Z,1513273933.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:13.555Z,1513273933.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:14.082Z,1513273934.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:14.342Z,1513273934.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:14.743Z,1513273934.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:15.156Z,1513273935.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:15.544Z,1513273935.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:15.991Z,1513273935.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:16.409Z,1513273936.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:16.731Z,1513273936.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:17.138Z,1513273937.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:17.572Z,1513273937.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:17.999Z,1513273937.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:18.358Z,1513273938.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:18.720Z,1513273938.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:19.120Z,1513273939.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:19.518Z,1513273939.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:19.919Z,1513273939.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:20.328Z,1513273940.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:20.747Z,1513273940.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:21.141Z,1513273941.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:21.549Z,1513273941.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:21.922Z,1513273941.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:22.378Z,1513273942.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:22.723Z,1513273942.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:23.122Z,1513273943.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:23.527Z,1513273943.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:23.962Z,1513273943.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:24.371Z,1513273944.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:24.729Z,1513273944.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:25.127Z,1513273945.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:25.520Z,1513273945.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:25.986Z,1513273945.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:26.312Z,1513273946.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:26.760Z,1513273946.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:27.150Z,1513273947.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:27.544Z,1513273947.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:27.992Z,1513273947.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:28.331Z,1513273948.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:28.727Z,1513273948.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:29.127Z,1513273949.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:29.533Z,1513273949.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:30.027Z,1513273950.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:30.355Z,1513273950.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:30.717Z,1513273950.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:31.119Z,1513273951.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:31.519Z,1513273951.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:32.009Z,1513273952.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:32.316Z,1513273952.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:32.724Z,1513273952.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:33.131Z,1513273953.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:33.583Z,1513273953.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:33.926Z,1513273953.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:34.336Z,1513273954.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:34.724Z,1513273954.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:35.114Z,1513273955.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:35.541Z,1513273955.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:35.939Z,1513273955.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:36.398Z,1513273956.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:36.768Z,1513273956.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:37.139Z,1513273957.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:37.519Z,1513273957.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:37.919Z,1513273957.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:38.373Z,1513273958.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:38.798Z,1513273958.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:39.134Z,1513273959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:39.582Z,1513273959.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:40.042Z,1513273960.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:40.359Z,1513273960.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:40.731Z,1513273960.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:41.122Z,1513273961.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:41.527Z,1513273961.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:42.014Z,1513273962.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:42.333Z,1513273962.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:42.727Z,1513273962.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:43.127Z,1513273963.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:43.523Z,1513273963.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:43.992Z,1513273963.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:44.311Z,1513273964.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:44.743Z,1513273964.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:45.136Z,1513273965.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:45.140Z,1513273965.140 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:47:44.9Z
2017-12-14T17:52:45.140Z,1513273965.140 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T17:52:45.140Z,1513273965.140 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T17:52:48.651Z,1513273968.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:49.290Z,1513273969.290 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20171214T002839/Courier0400.lzma
2017-12-14T17:52:49.337Z,1513273969.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:49.479Z,1513273969.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:49.764Z,1513273969.764 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0400.lzma.bak
2017-12-14T17:52:49.764Z,1513273969.764 [DataOverHttps](INFO): SBD MOMSN=5439292
2017-12-14T17:52:49.827Z,1513273969.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:51.044Z,1513273971.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:51.187Z,1513273971.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:54.692Z,1513273974.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:54.838Z,1513273974.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:55.188Z,1513273975.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:55.591Z,1513273975.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:56.048Z,1513273976.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:56.404Z,1513273976.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:59.803Z,1513273979.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:52:59.878Z,1513273979.878 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0401.lzma
2017-12-14T17:53:00.052Z,1513273980.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:00.291Z,1513273980.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:00.632Z,1513273980.632 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0401.lzma.bak
2017-12-14T17:53:00.632Z,1513273980.632 [DataOverHttps](INFO): SBD MOMSN=5439296
2017-12-14T17:53:00.671Z,1513273980.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:01.886Z,1513273981.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:01.890Z,1513273981.890 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T17:53:01.890Z,1513273981.890 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T17:53:01.890Z,1513273981.890 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T17:53:02.097Z,1513273982.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:05.503Z,1513273985.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:05.663Z,1513273985.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:06.027Z,1513273986.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:06.402Z,1513273986.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:06.790Z,1513273986.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:07.192Z,1513273987.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:07.594Z,1513273987.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:08.034Z,1513273988.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:08.415Z,1513273988.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:08.793Z,1513273988.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:09.171Z,1513273989.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:09.601Z,1513273989.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:10.102Z,1513273990.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:10.427Z,1513273990.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:10.812Z,1513273990.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:11.211Z,1513273991.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:11.588Z,1513273991.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:12.055Z,1513273992.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:12.418Z,1513273992.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:12.810Z,1513273992.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:13.189Z,1513273993.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:13.592Z,1513273993.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:14.052Z,1513273994.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:14.401Z,1513273994.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:14.885Z,1513273994.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:15.210Z,1513273995.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:15.589Z,1513273995.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:16.080Z,1513273996.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:16.410Z,1513273996.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:16.808Z,1513273996.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:17.207Z,1513273997.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:17.603Z,1513273997.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:18.042Z,1513273998.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:18.392Z,1513273998.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:18.819Z,1513273998.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:19.203Z,1513273999.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:19.596Z,1513273999.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:19.992Z,1513273999.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:20.463Z,1513274000.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:20.810Z,1513274000.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:21.198Z,1513274001.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x34763 got:0x59416
2017-12-14T17:53:21.275Z,1513274001.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:21.611Z,1513274001.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:22.034Z,1513274002.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:22.414Z,1513274002.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:22.791Z,1513274002.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:23.212Z,1513274003.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:23.583Z,1513274003.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:24.031Z,1513274004.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:24.439Z,1513274004.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:24.844Z,1513274004.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:25.208Z,1513274005.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:25.604Z,1513274005.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:26.075Z,1513274006.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:26.434Z,1513274006.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:26.802Z,1513274006.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:27.207Z,1513274007.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:27.608Z,1513274007.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:28.040Z,1513274008.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:28.434Z,1513274008.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:28.794Z,1513274008.794 [PNI_TCM](ERROR): CRC does not match. Expected:0x5533 got:0x16916
2017-12-14T17:53:28.832Z,1513274008.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:29.233Z,1513274009.233 [BPC1](ERROR): Failed to receive battery data
2017-12-14T17:53:29.233Z,1513274009.233 [BPC1] Communications Fault, FailCount= 1
2017-12-14T17:53:29.233Z,1513274009.233 [BPC1](ERROR): Communications Fault
2017-12-14T17:53:29.255Z,1513274009.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:29.312Z,1513274009.312 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T17:53:29.610Z,1513274009.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:30.083Z,1513274010.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:30.399Z,1513274010.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:30.422Z,1513274010.422 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T17:53:30.422Z,1513274010.422 [BPC1] No Fault, FailCount= 1
2017-12-14T17:53:30.883Z,1513274010.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:31.223Z,1513274011.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:31.593Z,1513274011.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:31.989Z,1513274011.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:32.400Z,1513274012.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:32.811Z,1513274012.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:33.201Z,1513274013.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:33.594Z,1513274013.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:34.027Z,1513274014.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:34.411Z,1513274014.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:34.802Z,1513274014.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:35.204Z,1513274015.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:35.603Z,1513274015.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:36.051Z,1513274016.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:36.404Z,1513274016.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:36.858Z,1513274016.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:37.247Z,1513274017.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:37.591Z,1513274017.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.026Z,1513274018.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.418Z,1513274018.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.808Z,1513274018.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.808Z,1513274018.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 346
2017-12-14T17:53:38.808Z,1513274018.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:53:38.810Z,1513274018.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.810Z,1513274018.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 346
2017-12-14T17:53:38.810Z,1513274018.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:53:38.812Z,1513274018.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:38.812Z,1513274018.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 346
2017-12-14T17:53:38.812Z,1513274018.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:53:38.824Z,1513274018.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:53:38.824Z,1513274018.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:53:38.824Z,1513274018.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:53:39.262Z,1513274019.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:53:39.262Z,1513274019.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 346
2017-12-14T17:53:39.263Z,1513274019.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:53:39.263Z,1513274019.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 346
2017-12-14T17:53:39.263Z,1513274019.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:53:39.263Z,1513274019.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 346
2017-12-14T17:53:39.706Z,1513274019.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:53:39.707Z,1513274019.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:53:39.707Z,1513274019.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:53:39.707Z,1513274019.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:53:39.708Z,1513274019.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:53:39.708Z,1513274019.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:53:39.708Z,1513274019.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:53:39.717Z,1513274019.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:53:39.717Z,1513274019.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:53:40.039Z,1513274020.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:40.455Z,1513274020.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:40.816Z,1513274020.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:41.208Z,1513274021.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:41.645Z,1513274021.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:42.036Z,1513274022.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:42.419Z,1513274022.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:42.796Z,1513274022.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:43.197Z,1513274023.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:43.667Z,1513274023.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:44.043Z,1513274024.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:44.396Z,1513274024.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x61703 got:0x44316
2017-12-14T17:53:44.434Z,1513274024.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:44.801Z,1513274024.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x21206 got:0x15947
2017-12-14T17:53:44.827Z,1513274024.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:45.203Z,1513274025.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:45.609Z,1513274025.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:45.993Z,1513274025.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:46.399Z,1513274026.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:46.826Z,1513274026.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:47.239Z,1513274027.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:47.600Z,1513274027.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:48.002Z,1513274028.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:48.398Z,1513274028.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:48.816Z,1513274028.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:49.231Z,1513274029.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:49.590Z,1513274029.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:50.103Z,1513274030.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:50.429Z,1513274030.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:50.801Z,1513274030.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:51.232Z,1513274031.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:51.591Z,1513274031.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:52.051Z,1513274032.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:52.425Z,1513274032.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:52.800Z,1513274032.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:53.203Z,1513274033.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:53.608Z,1513274033.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:54.040Z,1513274034.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:54.403Z,1513274034.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:54.807Z,1513274034.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:55.218Z,1513274035.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:55.574Z,1513274035.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:56.019Z,1513274036.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:56.433Z,1513274036.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:56.809Z,1513274036.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:57.211Z,1513274037.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:57.597Z,1513274037.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:58.068Z,1513274038.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:58.392Z,1513274038.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:58.816Z,1513274038.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:59.191Z,1513274039.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:53:59.631Z,1513274039.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:00.014Z,1513274040.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:00.419Z,1513274040.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:00.798Z,1513274040.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:01.199Z,1513274041.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:01.602Z,1513274041.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:01.981Z,1513274041.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:02.419Z,1513274042.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:05.801Z,1513274045.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:06.034Z,1513274046.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:06.311Z,1513274046.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:06.698Z,1513274046.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:07.103Z,1513274047.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:07.508Z,1513274047.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:07.950Z,1513274047.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:08.310Z,1513274048.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:08.706Z,1513274048.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:09.105Z,1513274049.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:09.505Z,1513274049.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:09.899Z,1513274049.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:10.294Z,1513274050.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:10.718Z,1513274050.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:11.157Z,1513274051.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:11.500Z,1513274051.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:11.894Z,1513274051.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:12.395Z,1513274052.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:12.708Z,1513274052.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:13.100Z,1513274053.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:13.551Z,1513274053.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:13.909Z,1513274053.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:14.391Z,1513274054.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:14.699Z,1513274054.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:15.092Z,1513274055.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:15.503Z,1513274055.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:15.899Z,1513274055.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:16.371Z,1513274056.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:16.711Z,1513274056.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:17.114Z,1513274057.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:17.510Z,1513274057.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:17.901Z,1513274057.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:18.302Z,1513274058.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:18.740Z,1513274058.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:19.121Z,1513274059.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:19.517Z,1513274059.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:19.957Z,1513274059.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:20.304Z,1513274060.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:20.702Z,1513274060.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:21.097Z,1513274061.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:21.499Z,1513274061.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:22.019Z,1513274062.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:22.303Z,1513274062.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:22.759Z,1513274062.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:23.117Z,1513274063.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:23.511Z,1513274063.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:23.890Z,1513274063.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:24.303Z,1513274064.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:24.696Z,1513274064.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:25.095Z,1513274065.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:25.516Z,1513274065.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:25.911Z,1513274065.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:26.308Z,1513274066.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:26.722Z,1513274066.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:27.098Z,1513274067.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:27.496Z,1513274067.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:27.892Z,1513274067.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:28.414Z,1513274068.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:28.715Z,1513274068.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:29.120Z,1513274069.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:29.515Z,1513274069.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:29.916Z,1513274069.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:30.371Z,1513274070.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:30.717Z,1513274070.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:31.118Z,1513274071.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:31.513Z,1513274071.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:31.927Z,1513274071.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:32.309Z,1513274072.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:32.696Z,1513274072.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:33.115Z,1513274073.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:33.499Z,1513274073.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:33.903Z,1513274073.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:34.302Z,1513274074.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:34.783Z,1513274074.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:35.115Z,1513274075.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:35.515Z,1513274075.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:35.998Z,1513274075.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:36.310Z,1513274076.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:36.717Z,1513274076.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:37.090Z,1513274077.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:37.512Z,1513274077.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:38.004Z,1513274078.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:38.307Z,1513274078.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:38.698Z,1513274078.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:39.099Z,1513274079.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:39.503Z,1513274079.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:39.899Z,1513274079.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:40.299Z,1513274080.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:40.704Z,1513274080.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:41.104Z,1513274081.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:41.511Z,1513274081.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:41.904Z,1513274081.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:42.358Z,1513274082.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:42.693Z,1513274082.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:43.096Z,1513274083.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:43.517Z,1513274083.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:43.916Z,1513274083.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:44.399Z,1513274084.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:44.699Z,1513274084.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:45.132Z,1513274085.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:45.496Z,1513274085.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:45.936Z,1513274085.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:46.295Z,1513274086.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:46.708Z,1513274086.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:47.111Z,1513274087.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:47.535Z,1513274087.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:47.892Z,1513274087.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:48.295Z,1513274088.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:48.694Z,1513274088.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:49.094Z,1513274089.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:49.496Z,1513274089.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:49.962Z,1513274089.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:50.310Z,1513274090.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:50.744Z,1513274090.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:51.103Z,1513274091.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:51.497Z,1513274091.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:51.922Z,1513274091.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:52.311Z,1513274092.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:52.715Z,1513274092.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:53.119Z,1513274093.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:53.513Z,1513274093.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:53.937Z,1513274093.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:54.300Z,1513274094.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:54.707Z,1513274094.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:55.100Z,1513274095.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:55.511Z,1513274095.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:55.960Z,1513274095.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:56.388Z,1513274096.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:56.698Z,1513274096.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:56.742Z,1513274096.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:54:57.148Z,1513274097.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:57.506Z,1513274097.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:57.546Z,1513274097.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:54:57.900Z,1513274097.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:58.387Z,1513274098.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:58.712Z,1513274098.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:59.158Z,1513274099.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:59.519Z,1513274099.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:54:59.960Z,1513274099.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:00.299Z,1513274100.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:00.696Z,1513274100.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:01.096Z,1513274101.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:01.502Z,1513274101.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:01.982Z,1513274101.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:02.309Z,1513274102.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:02.701Z,1513274102.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:06.204Z,1513274106.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:06.355Z,1513274106.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:06.723Z,1513274106.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:07.087Z,1513274107.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:07.515Z,1513274107.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:07.872Z,1513274107.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:08.279Z,1513274108.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:08.677Z,1513274108.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:09.080Z,1513274109.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:09.480Z,1513274109.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:09.912Z,1513274109.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:10.342Z,1513274110.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:10.688Z,1513274110.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:11.086Z,1513274111.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:11.487Z,1513274111.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:11.879Z,1513274111.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:12.346Z,1513274112.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:12.697Z,1513274112.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:13.158Z,1513274113.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:13.495Z,1513274113.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:13.868Z,1513274113.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:14.275Z,1513274114.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:14.676Z,1513274114.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:15.079Z,1513274115.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:15.484Z,1513274115.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:15.928Z,1513274115.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:16.316Z,1513274116.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:16.679Z,1513274116.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:17.080Z,1513274117.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:17.483Z,1513274117.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:17.987Z,1513274117.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:18.266Z,1513274118.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:18.691Z,1513274118.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:19.093Z,1513274119.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:19.558Z,1513274119.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:19.896Z,1513274119.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:20.283Z,1513274120.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:20.707Z,1513274120.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:21.080Z,1513274121.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:21.519Z,1513274121.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:21.910Z,1513274121.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:22.292Z,1513274122.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:22.676Z,1513274122.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:23.091Z,1513274123.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:23.471Z,1513274123.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:23.875Z,1513274123.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:24.347Z,1513274124.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:24.684Z,1513274124.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:25.083Z,1513274125.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:25.480Z,1513274125.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:25.911Z,1513274125.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:26.348Z,1513274126.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:26.678Z,1513274126.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:27.091Z,1513274127.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:27.490Z,1513274127.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:27.895Z,1513274127.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:28.311Z,1513274128.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:28.682Z,1513274128.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:29.114Z,1513274129.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:29.479Z,1513274129.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:29.968Z,1513274129.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:30.280Z,1513274130.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:30.687Z,1513274130.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:31.084Z,1513274131.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:31.484Z,1513274131.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:31.878Z,1513274131.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:32.334Z,1513274132.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:32.690Z,1513274132.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:33.072Z,1513274133.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:33.495Z,1513274133.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:33.978Z,1513274133.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:34.280Z,1513274134.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:34.676Z,1513274134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:35.072Z,1513274135.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:35.505Z,1513274135.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:35.879Z,1513274135.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:36.280Z,1513274136.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:36.676Z,1513274136.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:37.108Z,1513274137.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:37.488Z,1513274137.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:37.875Z,1513274137.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:38.343Z,1513274138.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:38.716Z,1513274138.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:39.091Z,1513274139.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:39.485Z,1513274139.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:39.903Z,1513274139.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:40.384Z,1513274140.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:40.672Z,1513274140.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:41.075Z,1513274141.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:41.472Z,1513274141.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:41.993Z,1513274141.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:42.275Z,1513274142.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:42.684Z,1513274142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:43.112Z,1513274143.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:43.487Z,1513274143.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:43.943Z,1513274143.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:44.282Z,1513274144.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:44.682Z,1513274144.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:45.082Z,1513274145.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:45.486Z,1513274145.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:45.891Z,1513274145.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:46.294Z,1513274146.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:46.670Z,1513274146.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:47.075Z,1513274147.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:47.476Z,1513274147.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:47.871Z,1513274147.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:48.295Z,1513274148.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:48.691Z,1513274148.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:49.103Z,1513274149.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:49.495Z,1513274149.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:49.879Z,1513274149.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:50.292Z,1513274150.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:50.682Z,1513274150.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:51.081Z,1513274151.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:51.439Z,1513274151.439 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T17:55:51.439Z,1513274151.439 [NAL9602] Data Fault, FailCount= 5
2017-12-14T17:55:51.439Z,1513274151.439 [NAL9602](ERROR): Data Fault
2017-12-14T17:55:51.543Z,1513274151.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:51.594Z,1513274151.594 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T17:55:51.594Z,1513274151.594 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T17:55:51.830Z,1513274151.830 [NAL9602](INFO): Powering down
2017-12-14T17:55:51.883Z,1513274151.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:51.903Z,1513274151.903 [CBIT](INFO): Critical error at 20171214T175551
2017-12-14T17:55:52.380Z,1513274152.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:52.676Z,1513274152.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:53.076Z,1513274153.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:53.476Z,1513274153.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:53.877Z,1513274153.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:54.324Z,1513274154.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:54.724Z,1513274154.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:55.075Z,1513274155.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:55.471Z,1513274155.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:55.868Z,1513274155.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:56.282Z,1513274156.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:56.686Z,1513274156.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:57.084Z,1513274157.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:57.485Z,1513274157.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:57.994Z,1513274157.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:58.274Z,1513274158.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:58.683Z,1513274158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:59.076Z,1513274159.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:59.471Z,1513274159.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:55:59.867Z,1513274159.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:00.275Z,1513274160.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:00.680Z,1513274160.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:01.080Z,1513274161.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:01.482Z,1513274161.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:01.871Z,1513274161.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:02.283Z,1513274162.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:02.677Z,1513274162.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:03.078Z,1513274163.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:06.633Z,1513274166.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:06.743Z,1513274166.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:07.186Z,1513274167.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:07.560Z,1513274167.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:07.962Z,1513274167.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:08.368Z,1513274168.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:08.728Z,1513274168.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:09.134Z,1513274169.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:09.540Z,1513274169.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:10.012Z,1513274170.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:10.311Z,1513274170.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:10.748Z,1513274170.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:11.150Z,1513274171.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:11.526Z,1513274171.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:12.002Z,1513274172.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:12.326Z,1513274172.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:12.727Z,1513274172.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:13.126Z,1513274173.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:13.522Z,1513274173.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:14.023Z,1513274174.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:14.335Z,1513274174.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:14.725Z,1513274174.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:15.130Z,1513274175.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:15.544Z,1513274175.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:16.020Z,1513274176.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:16.318Z,1513274176.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:16.724Z,1513274176.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:17.132Z,1513274177.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:17.534Z,1513274177.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:18.026Z,1513274178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:18.323Z,1513274178.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:18.726Z,1513274178.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:19.139Z,1513274179.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:19.542Z,1513274179.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:19.935Z,1513274179.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:20.399Z,1513274180.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:20.735Z,1513274180.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:21.148Z,1513274181.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:21.550Z,1513274181.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:21.939Z,1513274181.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:22.454Z,1513274182.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:22.764Z,1513274182.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:23.148Z,1513274183.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:23.543Z,1513274183.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:24.027Z,1513274184.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:24.341Z,1513274184.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:24.752Z,1513274184.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:25.158Z,1513274185.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:25.531Z,1513274185.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:26.037Z,1513274186.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:26.331Z,1513274186.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:26.732Z,1513274186.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:27.178Z,1513274187.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:27.537Z,1513274187.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:28.093Z,1513274188.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:28.349Z,1513274188.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:28.759Z,1513274188.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:29.219Z,1513274189.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:29.598Z,1513274189.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:30.027Z,1513274190.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:30.375Z,1513274190.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:30.732Z,1513274190.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:31.147Z,1513274191.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:31.539Z,1513274191.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:31.940Z,1513274191.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:32.359Z,1513274192.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:32.752Z,1513274192.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:33.176Z,1513274193.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:33.563Z,1513274193.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:33.978Z,1513274193.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:34.387Z,1513274194.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:34.752Z,1513274194.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:35.128Z,1513274195.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:35.543Z,1513274195.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:36.004Z,1513274196.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:36.377Z,1513274196.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:36.763Z,1513274196.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:37.166Z,1513274197.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:37.603Z,1513274197.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:37.622Z,1513274197.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:38.016Z,1513274198.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:38.366Z,1513274198.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:38.418Z,1513274198.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:38.739Z,1513274198.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:38.821Z,1513274198.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:39.158Z,1513274199.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:39.571Z,1513274199.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:39.618Z,1513274199.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:40.020Z,1513274200.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:40.020Z,1513274200.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 347
2017-12-14T17:56:40.020Z,1513274200.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:56:40.034Z,1513274200.034 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:40.034Z,1513274200.034 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 347
2017-12-14T17:56:40.034Z,1513274200.034 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:56:40.036Z,1513274200.036 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:40.036Z,1513274200.036 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 347
2017-12-14T17:56:40.036Z,1513274200.036 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:56:40.094Z,1513274200.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:56:40.094Z,1513274200.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:56:40.094Z,1513274200.094 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:56:40.409Z,1513274200.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:56:40.409Z,1513274200.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 347
2017-12-14T17:56:40.409Z,1513274200.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:56:40.410Z,1513274200.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 347
2017-12-14T17:56:40.410Z,1513274200.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:56:40.410Z,1513274200.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 347
2017-12-14T17:56:40.414Z,1513274200.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:40.742Z,1513274200.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:56:40.742Z,1513274200.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:56:40.742Z,1513274200.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:56:40.743Z,1513274200.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:56:40.743Z,1513274200.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:56:40.743Z,1513274200.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:56:40.744Z,1513274200.744 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:56:40.744Z,1513274200.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:56:40.745Z,1513274200.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:56:40.829Z,1513274200.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:41.144Z,1513274201.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:41.550Z,1513274201.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:41.626Z,1513274201.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:42.028Z,1513274202.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:42.334Z,1513274202.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:42.422Z,1513274202.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:42.779Z,1513274202.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:42.826Z,1513274202.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:43.174Z,1513274203.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:43.542Z,1513274203.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:43.622Z,1513274203.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:44.048Z,1513274204.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:44.351Z,1513274204.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:44.417Z,1513274204.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:44.751Z,1513274204.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:44.822Z,1513274204.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:45.141Z,1513274205.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:45.563Z,1513274205.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:45.618Z,1513274205.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:45.944Z,1513274205.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:46.331Z,1513274206.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:46.414Z,1513274206.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:46.731Z,1513274206.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:46.841Z,1513274206.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:47.142Z,1513274207.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:47.549Z,1513274207.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:47.974Z,1513274207.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:48.403Z,1513274208.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:48.739Z,1513274208.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:49.148Z,1513274209.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:49.624Z,1513274209.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:49.634Z,1513274209.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:49.964Z,1513274209.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:50.423Z,1513274210.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:50.430Z,1513274210.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:50.779Z,1513274210.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:50.834Z,1513274210.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:51.187Z,1513274211.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:51.524Z,1513274211.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:51.629Z,1513274211.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:52.019Z,1513274212.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:52.347Z,1513274212.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:52.417Z,1513274212.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:52.724Z,1513274212.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:53.118Z,1513274213.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:53.214Z,1513274213.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:53.534Z,1513274213.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:54.007Z,1513274214.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:54.014Z,1513274214.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:54.330Z,1513274214.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:54.417Z,1513274214.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:54.772Z,1513274214.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:55.133Z,1513274215.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:55.216Z,1513274215.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:55.523Z,1513274215.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:56.010Z,1513274216.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:56.010Z,1513274216.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:56.387Z,1513274216.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:56.433Z,1513274216.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:56:56.724Z,1513274216.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:57.131Z,1513274217.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:57.531Z,1513274217.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:58.016Z,1513274218.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:58.328Z,1513274218.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:58.728Z,1513274218.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:59.163Z,1513274219.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:59.617Z,1513274219.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:56:59.924Z,1513274219.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:00.327Z,1513274220.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:00.726Z,1513274220.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:01.135Z,1513274221.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:01.530Z,1513274221.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:01.940Z,1513274221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:02.350Z,1513274222.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:02.778Z,1513274222.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:03.136Z,1513274223.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:06.635Z,1513274226.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:06.783Z,1513274226.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:07.103Z,1513274227.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:07.516Z,1513274227.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:07.989Z,1513274227.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:08.310Z,1513274228.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:08.714Z,1513274228.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:09.113Z,1513274229.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:09.516Z,1513274229.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:09.976Z,1513274229.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:10.318Z,1513274230.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:10.714Z,1513274230.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:11.120Z,1513274231.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:11.539Z,1513274231.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:11.992Z,1513274231.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:12.347Z,1513274232.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:12.743Z,1513274232.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:13.106Z,1513274233.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:13.535Z,1513274233.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:13.907Z,1513274233.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:14.313Z,1513274234.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:14.705Z,1513274234.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:15.111Z,1513274235.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:15.529Z,1513274235.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:15.918Z,1513274235.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:16.375Z,1513274236.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:16.711Z,1513274236.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:17.104Z,1513274237.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:17.506Z,1513274237.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:17.906Z,1513274237.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:18.383Z,1513274238.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:18.761Z,1513274238.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:19.105Z,1513274239.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:19.507Z,1513274239.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:19.991Z,1513274239.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:20.314Z,1513274240.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:20.712Z,1513274240.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:21.096Z,1513274241.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:21.500Z,1513274241.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:22.051Z,1513274242.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:22.318Z,1513274242.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:22.707Z,1513274242.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:23.104Z,1513274243.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:23.503Z,1513274243.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:23.983Z,1513274243.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:24.308Z,1513274244.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:24.706Z,1513274244.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:25.112Z,1513274245.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:25.518Z,1513274245.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:25.896Z,1513274245.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:26.307Z,1513274246.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:26.703Z,1513274246.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:27.155Z,1513274247.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:27.506Z,1513274247.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:27.906Z,1513274247.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:28.341Z,1513274248.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:28.727Z,1513274248.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:29.107Z,1513274249.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:29.504Z,1513274249.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:29.902Z,1513274249.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:30.381Z,1513274250.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:30.705Z,1513274250.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:31.107Z,1513274251.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:31.541Z,1513274251.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:31.905Z,1513274251.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:32.395Z,1513274252.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:32.708Z,1513274252.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:33.109Z,1513274253.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:33.511Z,1513274253.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:33.586Z,1513274253.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:34.023Z,1513274254.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:34.311Z,1513274254.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:34.381Z,1513274254.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:34.786Z,1513274254.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:34.815Z,1513274254.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:35.112Z,1513274255.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:35.540Z,1513274255.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:35.582Z,1513274255.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:35.968Z,1513274255.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:36.318Z,1513274256.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:36.377Z,1513274256.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:36.702Z,1513274256.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:36.783Z,1513274256.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:37.105Z,1513274257.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:37.504Z,1513274257.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:37.577Z,1513274257.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:38.011Z,1513274258.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:38.316Z,1513274258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:38.375Z,1513274258.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:38.719Z,1513274258.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:38.785Z,1513274258.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:39.117Z,1513274259.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:39.517Z,1513274259.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:39.968Z,1513274259.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:40.298Z,1513274260.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:40.704Z,1513274260.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:41.101Z,1513274261.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:41.509Z,1513274261.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:41.906Z,1513274261.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:42.300Z,1513274262.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:42.704Z,1513274262.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:43.103Z,1513274263.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:43.505Z,1513274263.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:43.938Z,1513274263.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:44.358Z,1513274264.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:44.707Z,1513274264.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:45.110Z,1513274265.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:45.512Z,1513274265.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:45.622Z,1513274265.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:45.907Z,1513274265.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:46.409Z,1513274266.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:46.418Z,1513274266.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:46.713Z,1513274266.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:46.821Z,1513274266.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:47.115Z,1513274267.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:47.510Z,1513274267.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:47.618Z,1513274267.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:47.992Z,1513274267.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:48.300Z,1513274268.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:48.409Z,1513274268.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:48.703Z,1513274268.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:49.103Z,1513274269.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:49.206Z,1513274269.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:49.505Z,1513274269.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:49.934Z,1513274269.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:50.001Z,1513274270.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:50.315Z,1513274270.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:50.422Z,1513274270.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:50.751Z,1513274270.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:51.111Z,1513274271.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:51.218Z,1513274271.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:51.509Z,1513274271.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:51.522Z,1513274271.522 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T17:57:51.523Z,1513274271.523 [NAL9602] No Fault, FailCount= 5
2017-12-14T17:57:51.866Z,1513274271.866 [NAL9602](INFO): Powering up NAL9602
2017-12-14T17:57:51.974Z,1513274271.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:52.014Z,1513274272.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:52.304Z,1513274272.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:52.417Z,1513274272.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:52.708Z,1513274272.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:53.108Z,1513274273.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:53.215Z,1513274273.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:53.531Z,1513274273.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:54.010Z,1513274274.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:54.046Z,1513274274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:54.312Z,1513274274.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:54.445Z,1513274274.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:54.758Z,1513274274.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:55.113Z,1513274275.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:55.539Z,1513274275.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:55.904Z,1513274275.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:56.315Z,1513274276.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:56.739Z,1513274276.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:57.104Z,1513274277.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:57.242Z,1513274277.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:57.544Z,1513274277.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:57.905Z,1513274277.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:58.037Z,1513274278.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:57:58.372Z,1513274278.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:58.705Z,1513274278.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:59.107Z,1513274279.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:59.508Z,1513274279.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:57:59.911Z,1513274279.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:00.375Z,1513274280.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:00.427Z,1513274280.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:00.698Z,1513274280.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:00.801Z,1513274280.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:01.100Z,1513274281.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:01.504Z,1513274281.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:01.601Z,1513274281.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:01.899Z,1513274281.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:02.327Z,1513274282.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:02.330Z,1513274282.330 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T17:58:02.330Z,1513274282.330 [Default:CheckIn:C.Wait] Stopped
2017-12-14T17:58:02.330Z,1513274282.330 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T17:58:02.330Z,1513274282.330 [Default:CheckIn:D] Running Loop=1
2017-12-14T17:58:02.397Z,1513274282.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:02.671Z,1513274282.671 [NAL9602](INFO): NAL9602 initialized
2017-12-14T17:58:02.716Z,1513274282.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:02.719Z,1513274282.719 [Default:CheckIn:D] Stopped
2017-12-14T17:58:02.719Z,1513274282.719 [Default:CheckIn:E] Running Loop=1
2017-12-14T17:58:02.801Z,1513274282.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:03.119Z,1513274283.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1044.788802 min 
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn:E] Stopped
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn] Stopped
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn](INFO): Running loop #101
2017-12-14T17:58:03.123Z,1513274283.123 [Default:CheckIn] Running Loop=101
2017-12-14T17:58:03.124Z,1513274283.124 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T17:58:03.124Z,1513274283.124 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T17:58:03.523Z,1513274283.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:03.598Z,1513274283.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:04.393Z,1513274284.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:04.799Z,1513274284.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:05.593Z,1513274285.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:06.389Z,1513274286.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:06.794Z,1513274286.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:07.052Z,1513274287.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:07.201Z,1513274287.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:07.555Z,1513274287.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:07.590Z,1513274287.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:08.054Z,1513274288.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:08.379Z,1513274288.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:08.398Z,1513274288.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:08.767Z,1513274288.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:08.801Z,1513274288.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:09.178Z,1513274289.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:09.573Z,1513274289.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:09.599Z,1513274289.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:10.076Z,1513274290.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:10.368Z,1513274290.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:10.398Z,1513274290.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:10.752Z,1513274290.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:10.801Z,1513274290.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:11.183Z,1513274291.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:11.584Z,1513274291.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:11.598Z,1513274291.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:11.953Z,1513274291.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:12.392Z,1513274292.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:12.394Z,1513274292.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:12.759Z,1513274292.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:12.798Z,1513274292.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:13.167Z,1513274293.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:13.594Z,1513274293.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:13.611Z,1513274293.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:13.989Z,1513274293.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:14.375Z,1513274294.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:14.389Z,1513274294.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:14.763Z,1513274294.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:14.793Z,1513274294.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:15.166Z,1513274295.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:15.577Z,1513274295.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:15.589Z,1513274295.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:16.032Z,1513274296.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:16.371Z,1513274296.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:16.393Z,1513274296.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:16.767Z,1513274296.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:16.797Z,1513274296.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:17.167Z,1513274297.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:17.562Z,1513274297.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:17.596Z,1513274297.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:18.063Z,1513274298.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:18.386Z,1513274298.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:18.390Z,1513274298.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:18.776Z,1513274298.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:18.793Z,1513274298.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:19.213Z,1513274299.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:19.592Z,1513274299.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:19.603Z,1513274299.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:20.042Z,1513274300.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:20.385Z,1513274300.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:20.417Z,1513274300.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:20.776Z,1513274300.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:20.789Z,1513274300.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:21.187Z,1513274301.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:21.583Z,1513274301.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:21.586Z,1513274301.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:22.028Z,1513274302.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:22.363Z,1513274302.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:22.381Z,1513274302.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:22.787Z,1513274302.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:22.801Z,1513274302.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:23.155Z,1513274303.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:23.556Z,1513274303.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:23.582Z,1513274303.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:23.972Z,1513274303.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:24.372Z,1513274304.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:24.377Z,1513274304.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:24.771Z,1513274304.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:24.782Z,1513274304.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:25.186Z,1513274305.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:25.563Z,1513274305.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:25.579Z,1513274305.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:25.982Z,1513274305.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:26.374Z,1513274306.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:26.400Z,1513274306.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:26.759Z,1513274306.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:26.781Z,1513274306.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:27.171Z,1513274307.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:27.560Z,1513274307.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:27.578Z,1513274307.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:27.964Z,1513274307.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:28.374Z,1513274308.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:28.400Z,1513274308.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:28.759Z,1513274308.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:28.798Z,1513274308.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:29.199Z,1513274309.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:29.595Z,1513274309.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:29.610Z,1513274309.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:30.032Z,1513274310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:30.371Z,1513274310.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:30.389Z,1513274310.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:30.772Z,1513274310.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:30.793Z,1513274310.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:31.147Z,1513274311.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:31.552Z,1513274311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:31.590Z,1513274311.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:32.046Z,1513274312.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:32.387Z,1513274312.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:32.419Z,1513274312.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:32.771Z,1513274312.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:32.793Z,1513274312.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:33.174Z,1513274313.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:33.563Z,1513274313.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:33.590Z,1513274313.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:34.034Z,1513274314.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:34.382Z,1513274314.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:34.386Z,1513274314.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:34.760Z,1513274314.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:34.789Z,1513274314.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:35.168Z,1513274315.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:35.650Z,1513274315.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:36.031Z,1513274316.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:36.383Z,1513274316.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:36.774Z,1513274316.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:37.160Z,1513274317.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:37.564Z,1513274317.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:38.023Z,1513274318.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:38.370Z,1513274318.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:38.815Z,1513274318.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:39.205Z,1513274319.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:39.561Z,1513274319.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:39.578Z,1513274319.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:39.962Z,1513274319.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:40.373Z,1513274320.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:40.429Z,1513274320.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:40.763Z,1513274320.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:40.779Z,1513274320.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:41.231Z,1513274321.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:41.572Z,1513274321.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:41.574Z,1513274321.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:42.027Z,1513274322.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:42.370Z,1513274322.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:42.408Z,1513274322.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:42.756Z,1513274322.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:42.773Z,1513274322.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:43.207Z,1513274323.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:43.570Z,1513274323.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:43.595Z,1513274323.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:44.040Z,1513274324.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:44.366Z,1513274324.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:44.398Z,1513274324.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:44.762Z,1513274324.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:44.773Z,1513274324.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:45.211Z,1513274325.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:45.553Z,1513274325.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:45.586Z,1513274325.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:46.014Z,1513274326.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:46.381Z,1513274326.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:46.385Z,1513274326.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:46.769Z,1513274326.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:46.787Z,1513274326.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:47.198Z,1513274327.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:47.582Z,1513274327.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:47.586Z,1513274327.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:48.015Z,1513274328.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:48.378Z,1513274328.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:48.467Z,1513274328.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:48.763Z,1513274328.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:48.782Z,1513274328.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:49.183Z,1513274329.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:49.570Z,1513274329.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:50.044Z,1513274330.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:50.371Z,1513274330.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:50.763Z,1513274330.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:51.158Z,1513274331.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:51.611Z,1513274331.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:52.027Z,1513274332.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:52.379Z,1513274332.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:52.773Z,1513274332.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:53.172Z,1513274333.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:53.570Z,1513274333.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:53.583Z,1513274333.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:53.943Z,1513274333.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:54.377Z,1513274334.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:54.384Z,1513274334.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:54.782Z,1513274334.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:54.826Z,1513274334.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:55.180Z,1513274335.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:55.578Z,1513274335.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:55.584Z,1513274335.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:55.984Z,1513274335.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:56.374Z,1513274336.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:56.379Z,1513274336.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:56.751Z,1513274336.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:56.779Z,1513274336.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:57.191Z,1513274337.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:57.574Z,1513274337.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:57.576Z,1513274337.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:58.070Z,1513274338.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:58.363Z,1513274338.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:58.370Z,1513274338.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:58.760Z,1513274338.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:58.773Z,1513274338.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:58:59.163Z,1513274339.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:59.568Z,1513274339.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:58:59.570Z,1513274339.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:00.034Z,1513274340.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:00.370Z,1513274340.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:00.387Z,1513274340.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:00.771Z,1513274340.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:00.777Z,1513274340.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:01.175Z,1513274341.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:01.572Z,1513274341.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:01.575Z,1513274341.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:02.040Z,1513274342.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:02.370Z,1513274342.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:02.418Z,1513274342.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:02.757Z,1513274342.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:02.773Z,1513274342.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T17:59:03.175Z,1513274343.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:03.615Z,1513274343.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:07.160Z,1513274347.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:07.276Z,1513274347.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:07.711Z,1513274347.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:08.063Z,1513274348.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:08.479Z,1513274348.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:08.837Z,1513274348.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:09.283Z,1513274349.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:09.658Z,1513274349.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:10.056Z,1513274350.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:10.442Z,1513274350.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:10.889Z,1513274350.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:11.239Z,1513274351.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:11.643Z,1513274351.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:12.044Z,1513274352.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:12.444Z,1513274352.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:12.844Z,1513274352.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:13.240Z,1513274353.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:13.636Z,1513274353.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:14.103Z,1513274354.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:14.439Z,1513274354.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:14.851Z,1513274354.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:15.255Z,1513274355.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:15.648Z,1513274355.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:16.061Z,1513274356.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:16.439Z,1513274356.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:16.843Z,1513274356.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:17.270Z,1513274357.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:17.659Z,1513274357.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:18.048Z,1513274358.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:18.451Z,1513274358.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:18.850Z,1513274358.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:19.290Z,1513274359.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:19.642Z,1513274359.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:20.076Z,1513274360.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:20.470Z,1513274360.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:20.839Z,1513274360.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:21.246Z,1513274361.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:21.659Z,1513274361.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:22.055Z,1513274362.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:22.449Z,1513274362.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:22.840Z,1513274362.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:23.255Z,1513274363.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:23.709Z,1513274363.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:24.060Z,1513274364.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:24.432Z,1513274364.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:24.869Z,1513274364.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:25.237Z,1513274365.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:25.630Z,1513274365.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:26.043Z,1513274366.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:26.440Z,1513274366.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:26.877Z,1513274366.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:27.242Z,1513274367.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:27.651Z,1513274367.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:28.048Z,1513274368.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:28.439Z,1513274368.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:28.851Z,1513274368.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:29.243Z,1513274369.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:29.680Z,1513274369.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:29.705Z,1513274369.705 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T17:59:30.059Z,1513274370.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:30.440Z,1513274370.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:30.875Z,1513274370.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:31.255Z,1513274371.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:31.671Z,1513274371.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:32.041Z,1513274372.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:32.430Z,1513274372.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:32.835Z,1513274372.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:33.272Z,1513274373.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:33.663Z,1513274373.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:34.071Z,1513274374.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:34.441Z,1513274374.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:34.839Z,1513274374.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:35.231Z,1513274375.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:35.629Z,1513274375.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:36.051Z,1513274376.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:36.464Z,1513274376.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:36.860Z,1513274376.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:37.240Z,1513274377.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:37.637Z,1513274377.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:38.031Z,1513274378.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:38.435Z,1513274378.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:38.839Z,1513274378.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:39.260Z,1513274379.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:39.704Z,1513274379.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.035Z,1513274380.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.434Z,1513274380.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.844Z,1513274380.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.844Z,1513274380.844 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 348
2017-12-14T17:59:40.844Z,1513274380.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T17:59:40.862Z,1513274380.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.862Z,1513274380.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 348
2017-12-14T17:59:40.862Z,1513274380.862 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T17:59:40.864Z,1513274380.864 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:40.864Z,1513274380.864 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 348
2017-12-14T17:59:40.864Z,1513274380.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T17:59:40.901Z,1513274380.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T17:59:40.901Z,1513274380.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T17:59:40.902Z,1513274380.902 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T17:59:41.247Z,1513274381.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T17:59:41.247Z,1513274381.247 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 348
2017-12-14T17:59:41.247Z,1513274381.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T17:59:41.247Z,1513274381.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 348
2017-12-14T17:59:41.248Z,1513274381.248 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T17:59:41.248Z,1513274381.248 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 348
2017-12-14T17:59:41.637Z,1513274381.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T17:59:41.638Z,1513274381.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:59:41.638Z,1513274381.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:59:41.638Z,1513274381.638 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T17:59:41.639Z,1513274381.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:59:41.639Z,1513274381.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:59:41.640Z,1513274381.640 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T17:59:41.640Z,1513274381.640 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T17:59:41.640Z,1513274381.640 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T17:59:42.043Z,1513274382.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:42.442Z,1513274382.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:42.883Z,1513274382.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:43.244Z,1513274383.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:43.635Z,1513274383.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:44.034Z,1513274384.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:44.443Z,1513274384.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:44.835Z,1513274384.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:45.243Z,1513274385.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:45.644Z,1513274385.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:46.120Z,1513274386.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:46.440Z,1513274386.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:46.835Z,1513274386.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:47.235Z,1513274387.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:47.633Z,1513274387.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:48.080Z,1513274388.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:48.439Z,1513274388.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:48.844Z,1513274388.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:49.280Z,1513274389.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:49.631Z,1513274389.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:50.039Z,1513274390.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:50.452Z,1513274390.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:50.836Z,1513274390.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:51.282Z,1513274391.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:51.648Z,1513274391.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:52.094Z,1513274392.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:52.451Z,1513274392.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:52.840Z,1513274392.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:53.255Z,1513274393.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:53.285Z,1513274393.285 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T17:59:53.285Z,1513274393.285 [DropWeight] No Fault, FailCount= 1
2017-12-14T17:59:53.643Z,1513274393.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:54.063Z,1513274394.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:54.450Z,1513274394.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:54.850Z,1513274394.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:55.244Z,1513274395.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:55.692Z,1513274395.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:56.058Z,1513274396.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:56.445Z,1513274396.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:56.839Z,1513274396.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:57.254Z,1513274397.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:57.659Z,1513274397.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:58.054Z,1513274398.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:58.449Z,1513274398.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:58.899Z,1513274398.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:59.238Z,1513274399.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T17:59:59.632Z,1513274399.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:00.038Z,1513274400.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:00.463Z,1513274400.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:00.866Z,1513274400.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:01.262Z,1513274401.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:01.642Z,1513274401.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:02.120Z,1513274402.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:02.430Z,1513274402.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:02.829Z,1513274402.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:03.266Z,1513274403.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:03.668Z,1513274403.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:07.131Z,1513274407.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:07.244Z,1513274407.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:07.619Z,1513274407.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:08.035Z,1513274408.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:08.465Z,1513274408.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:08.829Z,1513274408.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:09.236Z,1513274409.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:09.627Z,1513274409.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:10.038Z,1513274410.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:10.427Z,1513274410.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:10.810Z,1513274410.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:11.235Z,1513274411.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:11.635Z,1513274411.635 [PNI_TCM](ERROR): CRC does not match. Expected:0x56995 got:0x0
2017-12-14T18:00:11.663Z,1513274411.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:12.041Z,1513274412.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:12.417Z,1513274412.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:12.842Z,1513274412.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:13.234Z,1513274413.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:13.612Z,1513274413.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:14.114Z,1513274414.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:14.418Z,1513274414.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:14.869Z,1513274414.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:15.225Z,1513274415.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:15.661Z,1513274415.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:16.084Z,1513274416.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:16.425Z,1513274416.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:16.810Z,1513274416.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:17.210Z,1513274417.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:17.628Z,1513274417.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:18.004Z,1513274418.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x38022 got:0x288
2017-12-14T18:00:18.040Z,1513274418.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:18.416Z,1513274418.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:18.827Z,1513274418.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:19.215Z,1513274419.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:19.616Z,1513274419.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:20.004Z,1513274420.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x58770 got:0x64797
2017-12-14T18:00:20.023Z,1513274420.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:20.412Z,1513274420.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:20.828Z,1513274420.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:21.247Z,1513274421.247 [PNI_TCM](ERROR): CRC does not match. Expected:0x32163 got:0x112
2017-12-14T18:00:21.296Z,1513274421.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:21.627Z,1513274421.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:22.029Z,1513274422.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:22.420Z,1513274422.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:22.814Z,1513274422.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:23.210Z,1513274423.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:23.610Z,1513274423.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:24.048Z,1513274424.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:24.428Z,1513274424.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:24.823Z,1513274424.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:25.223Z,1513274425.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:25.631Z,1513274425.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:26.019Z,1513274426.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x9884 got:0x352
2017-12-14T18:00:26.040Z,1513274426.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:26.417Z,1513274426.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:26.841Z,1513274426.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:27.226Z,1513274427.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:27.624Z,1513274427.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:28.045Z,1513274428.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:28.423Z,1513274428.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:28.827Z,1513274428.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:29.205Z,1513274429.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x35756 got:0x15671
2017-12-14T18:00:29.229Z,1513274429.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:29.629Z,1513274429.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:30.067Z,1513274430.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:30.419Z,1513274430.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:30.896Z,1513274430.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:31.224Z,1513274431.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:31.619Z,1513274431.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:32.015Z,1513274432.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:32.424Z,1513274432.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:32.811Z,1513274432.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:33.220Z,1513274433.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:33.632Z,1513274433.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:34.080Z,1513274434.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:34.432Z,1513274434.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:34.811Z,1513274434.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:35.227Z,1513274435.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:35.601Z,1513274435.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x4816 got:0x8192
2017-12-14T18:00:35.632Z,1513274435.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:36.115Z,1513274436.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:36.427Z,1513274436.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:36.827Z,1513274436.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:37.303Z,1513274437.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:37.615Z,1513274437.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:38.055Z,1513274438.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:38.427Z,1513274438.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:38.800Z,1513274438.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x3655 got:0x94
2017-12-14T18:00:38.828Z,1513274438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:39.247Z,1513274439.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:39.613Z,1513274439.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:40.044Z,1513274440.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:40.459Z,1513274440.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:40.822Z,1513274440.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:41.204Z,1513274441.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:41.621Z,1513274441.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:42.037Z,1513274442.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:42.423Z,1513274442.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:42.828Z,1513274442.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:43.223Z,1513274443.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:43.669Z,1513274443.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:44.076Z,1513274444.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:44.404Z,1513274444.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:44.830Z,1513274444.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:45.219Z,1513274445.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x24166 got:0x129
2017-12-14T18:00:45.239Z,1513274445.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:45.627Z,1513274445.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:46.035Z,1513274446.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:46.471Z,1513274446.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:46.840Z,1513274446.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:47.227Z,1513274447.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:47.625Z,1513274447.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:48.030Z,1513274448.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:48.419Z,1513274448.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x46821 got:0x36817
2017-12-14T18:00:48.447Z,1513274448.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:48.821Z,1513274448.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:49.209Z,1513274449.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:49.630Z,1513274449.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:50.053Z,1513274450.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x31891 got:0x22812
2017-12-14T18:00:50.083Z,1513274450.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:50.425Z,1513274450.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:50.810Z,1513274450.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:51.236Z,1513274451.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:51.635Z,1513274451.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:52.036Z,1513274452.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:52.415Z,1513274452.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:52.837Z,1513274452.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:53.248Z,1513274453.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:53.614Z,1513274453.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:54.043Z,1513274454.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:54.422Z,1513274454.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:54.827Z,1513274454.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:55.220Z,1513274455.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:55.613Z,1513274455.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:56.046Z,1513274456.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:56.463Z,1513274456.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:56.811Z,1513274456.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:57.227Z,1513274457.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:57.633Z,1513274457.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:58.077Z,1513274458.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:58.447Z,1513274458.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:58.835Z,1513274458.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:59.236Z,1513274459.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:00:59.615Z,1513274459.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x6795 got:0x32768
2017-12-14T18:00:59.683Z,1513274459.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:00.017Z,1513274460.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:00.450Z,1513274460.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:00.822Z,1513274460.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:01.223Z,1513274461.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:01.609Z,1513274461.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:02.014Z,1513274462.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:02.427Z,1513274462.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:02.803Z,1513274462.803 [PNI_TCM](ERROR): CRC does not match. Expected:0x18941 got:0x20072
2017-12-14T18:01:02.835Z,1513274462.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:03.225Z,1513274463.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:03.623Z,1513274463.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:04.041Z,1513274464.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:07.413Z,1513274467.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:07.565Z,1513274467.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:07.888Z,1513274467.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:08.295Z,1513274468.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:08.727Z,1513274468.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:09.084Z,1513274469.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:09.487Z,1513274469.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:09.879Z,1513274469.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:10.301Z,1513274470.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:10.715Z,1513274470.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:11.103Z,1513274471.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:11.478Z,1513274471.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:11.905Z,1513274471.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:12.283Z,1513274472.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:12.685Z,1513274472.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:13.083Z,1513274473.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:13.494Z,1513274473.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:13.899Z,1513274473.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:14.359Z,1513274474.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:14.691Z,1513274474.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:15.089Z,1513274475.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:15.492Z,1513274475.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:15.890Z,1513274475.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:16.399Z,1513274476.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:16.769Z,1513274476.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:17.105Z,1513274477.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:17.483Z,1513274477.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:17.978Z,1513274477.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:18.382Z,1513274478.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:18.706Z,1513274478.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:19.096Z,1513274479.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:19.511Z,1513274479.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:20.055Z,1513274480.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:20.318Z,1513274480.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:20.808Z,1513274480.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:21.099Z,1513274481.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:21.547Z,1513274481.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:21.886Z,1513274481.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:22.340Z,1513274482.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:22.707Z,1513274482.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:23.117Z,1513274483.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:23.482Z,1513274483.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:23.888Z,1513274483.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:24.320Z,1513274484.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:24.685Z,1513274484.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:25.114Z,1513274485.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:25.526Z,1513274485.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:25.907Z,1513274485.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:26.326Z,1513274486.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:26.687Z,1513274486.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:27.087Z,1513274487.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:27.520Z,1513274487.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:27.932Z,1513274487.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:28.411Z,1513274488.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:28.726Z,1513274488.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:29.112Z,1513274489.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:29.518Z,1513274489.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:29.910Z,1513274489.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:30.403Z,1513274490.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:30.717Z,1513274490.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:31.115Z,1513274491.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:31.511Z,1513274491.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:31.964Z,1513274491.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:32.334Z,1513274492.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:32.708Z,1513274492.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:33.121Z,1513274493.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:33.520Z,1513274493.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:33.994Z,1513274493.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:34.322Z,1513274494.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:34.697Z,1513274494.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:35.101Z,1513274495.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:35.532Z,1513274495.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:35.964Z,1513274495.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:36.329Z,1513274496.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:36.695Z,1513274496.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:37.123Z,1513274497.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:37.518Z,1513274497.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:37.980Z,1513274497.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:38.303Z,1513274498.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:38.707Z,1513274498.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:39.122Z,1513274499.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:39.614Z,1513274499.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:39.928Z,1513274499.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:40.307Z,1513274500.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:40.732Z,1513274500.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:41.120Z,1513274501.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:41.514Z,1513274501.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:41.907Z,1513274501.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:42.423Z,1513274502.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:42.779Z,1513274502.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:43.127Z,1513274503.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:43.495Z,1513274503.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:43.947Z,1513274503.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:44.360Z,1513274504.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:44.707Z,1513274504.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:45.142Z,1513274505.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:45.548Z,1513274505.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:46.043Z,1513274506.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:46.313Z,1513274506.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:46.723Z,1513274506.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:47.097Z,1513274507.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:47.528Z,1513274507.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:47.968Z,1513274507.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:48.311Z,1513274508.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:48.687Z,1513274508.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:49.128Z,1513274509.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:49.515Z,1513274509.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:49.952Z,1513274509.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:50.292Z,1513274510.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:50.708Z,1513274510.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:51.107Z,1513274511.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:51.492Z,1513274511.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:51.882Z,1513274511.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:52.282Z,1513274512.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:52.684Z,1513274512.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:53.131Z,1513274513.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:53.500Z,1513274513.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:53.901Z,1513274513.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:54.293Z,1513274514.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:54.694Z,1513274514.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:55.087Z,1513274515.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:55.491Z,1513274515.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:55.936Z,1513274515.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:56.358Z,1513274516.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:56.712Z,1513274516.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:57.111Z,1513274517.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:57.509Z,1513274517.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:57.907Z,1513274517.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:58.396Z,1513274518.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:58.681Z,1513274518.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:59.161Z,1513274519.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:59.507Z,1513274519.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:01:59.974Z,1513274519.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:00.287Z,1513274520.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:00.687Z,1513274520.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:01.091Z,1513274521.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:01.493Z,1513274521.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:01.992Z,1513274521.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:02.338Z,1513274522.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:02.694Z,1513274522.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:03.092Z,1513274523.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:03.500Z,1513274523.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:03.882Z,1513274523.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:04.300Z,1513274524.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:07.912Z,1513274527.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:08.102Z,1513274528.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:08.424Z,1513274528.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:08.859Z,1513274528.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:09.214Z,1513274529.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:09.632Z,1513274529.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:10.030Z,1513274530.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:10.433Z,1513274530.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:10.828Z,1513274530.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:11.235Z,1513274531.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:11.619Z,1513274531.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:12.065Z,1513274532.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:12.430Z,1513274532.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:12.823Z,1513274532.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:13.231Z,1513274533.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:13.727Z,1513274533.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:14.030Z,1513274534.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:14.427Z,1513274534.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:14.821Z,1513274534.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:15.223Z,1513274535.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:15.608Z,1513274535.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:16.045Z,1513274536.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:16.491Z,1513274536.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:16.811Z,1513274536.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:17.216Z,1513274537.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:17.621Z,1513274537.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:18.056Z,1513274538.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:18.452Z,1513274538.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:18.812Z,1513274538.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:19.231Z,1513274539.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:19.624Z,1513274539.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:20.038Z,1513274540.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:20.420Z,1513274540.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:20.814Z,1513274540.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:21.208Z,1513274541.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:21.625Z,1513274541.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:22.119Z,1513274542.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:22.432Z,1513274542.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:22.831Z,1513274542.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:23.220Z,1513274543.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:23.615Z,1513274543.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:24.014Z,1513274544.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:24.423Z,1513274544.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:24.816Z,1513274544.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:25.223Z,1513274545.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:25.637Z,1513274545.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:26.023Z,1513274546.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:26.426Z,1513274546.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:26.817Z,1513274546.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:27.220Z,1513274547.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:27.601Z,1513274547.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x27831 got:0x53507
2017-12-14T18:02:27.635Z,1513274547.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:28.042Z,1513274548.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:28.449Z,1513274548.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:28.888Z,1513274548.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:29.239Z,1513274549.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:29.614Z,1513274549.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:30.107Z,1513274550.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:30.417Z,1513274550.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:30.816Z,1513274550.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:31.240Z,1513274551.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:31.663Z,1513274551.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:32.063Z,1513274552.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:32.432Z,1513274552.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:32.816Z,1513274552.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:33.215Z,1513274553.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:33.618Z,1513274553.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:34.029Z,1513274554.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:34.435Z,1513274554.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:34.877Z,1513274554.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:35.235Z,1513274555.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:35.636Z,1513274555.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:36.070Z,1513274556.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:36.419Z,1513274556.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:36.819Z,1513274556.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:37.238Z,1513274557.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:37.621Z,1513274557.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:38.051Z,1513274558.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:38.419Z,1513274558.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:38.817Z,1513274558.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:39.274Z,1513274559.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:39.614Z,1513274559.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:40.014Z,1513274560.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:40.459Z,1513274560.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:40.818Z,1513274560.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:41.244Z,1513274561.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:41.625Z,1513274561.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:42.043Z,1513274562.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:42.043Z,1513274562.043 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 349
2017-12-14T18:02:42.044Z,1513274562.044 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:02:42.069Z,1513274562.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:42.069Z,1513274562.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 349
2017-12-14T18:02:42.070Z,1513274562.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:02:42.077Z,1513274562.077 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:42.077Z,1513274562.077 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 349
2017-12-14T18:02:42.077Z,1513274562.077 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:02:42.112Z,1513274562.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:02:42.113Z,1513274562.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:02:42.113Z,1513274562.113 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:02:42.437Z,1513274562.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:02:42.437Z,1513274562.437 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 349
2017-12-14T18:02:42.438Z,1513274562.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:02:42.438Z,1513274562.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 349
2017-12-14T18:02:42.438Z,1513274562.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:02:42.438Z,1513274562.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 349
2017-12-14T18:02:42.818Z,1513274562.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:02:42.818Z,1513274562.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:02:42.819Z,1513274562.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:02:42.819Z,1513274562.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:02:42.819Z,1513274562.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:02:42.820Z,1513274562.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:02:42.820Z,1513274562.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:02:42.826Z,1513274562.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:02:42.826Z,1513274562.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:02:43.214Z,1513274563.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:43.616Z,1513274563.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:44.056Z,1513274564.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:44.446Z,1513274564.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:44.811Z,1513274564.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:45.211Z,1513274565.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:45.613Z,1513274565.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:46.054Z,1513274566.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:46.418Z,1513274566.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:46.835Z,1513274566.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:47.232Z,1513274567.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:47.648Z,1513274567.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:48.043Z,1513274568.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:48.410Z,1513274568.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:48.804Z,1513274568.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:49.240Z,1513274569.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:49.630Z,1513274569.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:50.092Z,1513274570.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:50.412Z,1513274570.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:50.848Z,1513274570.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:51.213Z,1513274571.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:51.641Z,1513274571.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:52.002Z,1513274572.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x54077 got:0x16903
2017-12-14T18:02:52.020Z,1513274572.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:52.486Z,1513274572.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:52.831Z,1513274572.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:53.247Z,1513274573.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:53.608Z,1513274573.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:54.071Z,1513274574.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:54.407Z,1513274574.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:54.814Z,1513274574.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:55.224Z,1513274575.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:55.631Z,1513274575.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:56.044Z,1513274576.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:56.431Z,1513274576.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:56.823Z,1513274576.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:57.265Z,1513274577.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:57.610Z,1513274577.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:58.042Z,1513274578.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:58.438Z,1513274578.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:58.819Z,1513274578.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:59.238Z,1513274579.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:02:59.611Z,1513274579.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:00.036Z,1513274580.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:00.455Z,1513274580.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:00.823Z,1513274580.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:01.228Z,1513274581.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:01.629Z,1513274581.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:02.036Z,1513274582.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:02.443Z,1513274582.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:02.813Z,1513274582.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:03.219Z,1513274583.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:03.231Z,1513274583.231 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T17:58:03.1Z
2017-12-14T18:03:03.231Z,1513274583.231 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:03:03.231Z,1513274583.231 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:03:03.656Z,1513274583.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:04.719Z,1513274584.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:04.851Z,1513274584.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:08.531Z,1513274588.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:08.609Z,1513274588.609 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171214T002839/Courier0404.lzma
2017-12-14T18:03:08.683Z,1513274588.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:09.066Z,1513274589.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:09.415Z,1513274589.415 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0404.lzma.bak
2017-12-14T18:03:09.416Z,1513274589.416 [DataOverHttps](INFO): SBD MOMSN=5439307
2017-12-14T18:03:09.482Z,1513274589.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:10.930Z,1513274590.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:11.083Z,1513274591.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:14.695Z,1513274594.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:14.807Z,1513274594.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:15.187Z,1513274595.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:15.631Z,1513274595.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:16.040Z,1513274596.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:16.431Z,1513274596.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:19.786Z,1513274599.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:20.031Z,1513274600.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:20.395Z,1513274600.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:20.749Z,1513274600.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:21.140Z,1513274601.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:21.551Z,1513274601.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:25.097Z,1513274605.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:25.162Z,1513274605.162 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0405.lzma
2017-12-14T18:03:25.235Z,1513274605.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:25.599Z,1513274605.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:25.971Z,1513274605.971 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0405.lzma.bak
2017-12-14T18:03:25.971Z,1513274605.971 [DataOverHttps](INFO): SBD MOMSN=5439310
2017-12-14T18:03:26.048Z,1513274606.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:49.263Z,1513274629.263 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:03:49.263Z,1513274629.263 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:03:49.263Z,1513274629.263 [BPC1](ERROR): Communications Fault
2017-12-14T18:03:49.271Z,1513274629.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:49.275Z,1513274629.275 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:03:49.275Z,1513274629.275 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:03:49.275Z,1513274629.275 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:03:49.314Z,1513274629.314 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:03:49.403Z,1513274629.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:53.017Z,1513274633.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:53.184Z,1513274633.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:53.197Z,1513274633.197 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:03:53.197Z,1513274633.197 [BPC1] No Fault, FailCount= 1
2017-12-14T18:03:53.567Z,1513274633.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:53.967Z,1513274633.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:54.299Z,1513274634.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:54.695Z,1513274634.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:55.091Z,1513274635.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:55.524Z,1513274635.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:55.999Z,1513274635.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:56.324Z,1513274636.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:56.702Z,1513274636.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:57.107Z,1513274637.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:57.504Z,1513274637.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:57.975Z,1513274637.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:58.337Z,1513274638.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:58.726Z,1513274638.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:59.128Z,1513274639.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:59.507Z,1513274639.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:03:59.903Z,1513274639.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:00.296Z,1513274640.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:00.719Z,1513274640.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:01.120Z,1513274641.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:01.518Z,1513274641.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:01.965Z,1513274641.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:02.384Z,1513274642.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:02.696Z,1513274642.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:03.099Z,1513274643.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:03.497Z,1513274643.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:03.951Z,1513274643.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:04.364Z,1513274644.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:04.709Z,1513274644.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:05.107Z,1513274645.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:05.503Z,1513274645.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:05.996Z,1513274645.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:06.302Z,1513274646.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:06.704Z,1513274646.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:07.140Z,1513274647.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:07.511Z,1513274647.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:07.979Z,1513274647.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:08.323Z,1513274648.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:08.707Z,1513274648.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:09.110Z,1513274649.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:09.493Z,1513274649.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:09.973Z,1513274649.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:10.353Z,1513274650.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:10.723Z,1513274650.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:11.114Z,1513274651.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:11.500Z,1513274651.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:12.001Z,1513274652.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:12.350Z,1513274652.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:12.701Z,1513274652.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:13.099Z,1513274653.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:13.539Z,1513274653.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:13.909Z,1513274653.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:14.371Z,1513274654.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:14.711Z,1513274654.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:15.142Z,1513274655.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:15.501Z,1513274655.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:15.946Z,1513274655.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:16.348Z,1513274656.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:16.755Z,1513274656.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:17.101Z,1513274657.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:17.497Z,1513274657.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:17.902Z,1513274657.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:18.366Z,1513274658.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:18.703Z,1513274658.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:19.119Z,1513274659.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:19.519Z,1513274659.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:20.010Z,1513274660.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:20.300Z,1513274660.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:20.702Z,1513274660.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:21.100Z,1513274661.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:21.513Z,1513274661.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:21.986Z,1513274661.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:22.313Z,1513274662.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:22.710Z,1513274662.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:23.106Z,1513274663.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:23.511Z,1513274663.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:23.964Z,1513274663.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:24.345Z,1513274664.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:24.722Z,1513274664.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:25.120Z,1513274665.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:25.505Z,1513274665.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:25.972Z,1513274665.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:26.363Z,1513274666.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:26.700Z,1513274666.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:27.107Z,1513274667.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:27.514Z,1513274667.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:27.919Z,1513274667.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:28.337Z,1513274668.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:28.705Z,1513274668.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:29.100Z,1513274669.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:29.522Z,1513274669.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:29.900Z,1513274669.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:30.349Z,1513274670.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:30.715Z,1513274670.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:31.119Z,1513274671.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:31.502Z,1513274671.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:31.902Z,1513274671.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:32.347Z,1513274672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:32.793Z,1513274672.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:33.100Z,1513274673.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:33.504Z,1513274673.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:33.999Z,1513274673.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:34.302Z,1513274674.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:34.700Z,1513274674.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:35.147Z,1513274675.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:35.507Z,1513274675.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:36.071Z,1513274676.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:36.314Z,1513274676.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:36.710Z,1513274676.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:37.138Z,1513274677.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:37.511Z,1513274677.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:38.072Z,1513274678.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:38.296Z,1513274678.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:38.716Z,1513274678.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:39.127Z,1513274679.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:39.498Z,1513274679.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:39.980Z,1513274679.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:40.303Z,1513274680.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:40.707Z,1513274680.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:41.099Z,1513274681.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:41.509Z,1513274681.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:41.912Z,1513274681.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:42.308Z,1513274682.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:42.722Z,1513274682.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:43.100Z,1513274683.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:43.537Z,1513274683.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:43.913Z,1513274683.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:44.387Z,1513274684.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:44.704Z,1513274684.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:45.104Z,1513274685.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:45.562Z,1513274685.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:45.902Z,1513274685.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:46.402Z,1513274686.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:46.711Z,1513274686.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:47.123Z,1513274687.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:47.524Z,1513274687.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:47.971Z,1513274687.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:48.300Z,1513274688.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:48.750Z,1513274688.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:49.107Z,1513274689.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:49.514Z,1513274689.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:49.973Z,1513274689.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:53.778Z,1513274693.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:53.999Z,1513274693.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:54.279Z,1513274694.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:54.681Z,1513274694.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:55.092Z,1513274695.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:55.496Z,1513274695.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:55.902Z,1513274695.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:56.296Z,1513274696.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:56.679Z,1513274696.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:57.105Z,1513274697.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:57.477Z,1513274697.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:57.873Z,1513274697.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:58.332Z,1513274698.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:58.748Z,1513274698.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:59.084Z,1513274699.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:59.480Z,1513274699.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:04:59.918Z,1513274699.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:00.371Z,1513274700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:00.715Z,1513274700.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:01.099Z,1513274701.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:01.503Z,1513274701.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:01.889Z,1513274701.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:02.272Z,1513274702.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:02.672Z,1513274702.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:03.074Z,1513274703.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:03.500Z,1513274703.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:04.007Z,1513274704.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:04.276Z,1513274704.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:04.720Z,1513274704.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:05.109Z,1513274705.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:05.475Z,1513274705.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:05.883Z,1513274705.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:06.294Z,1513274706.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:06.694Z,1513274706.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:07.091Z,1513274707.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:07.483Z,1513274707.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:08.007Z,1513274708.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:08.280Z,1513274708.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:08.679Z,1513274708.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:09.111Z,1513274709.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:09.491Z,1513274709.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:09.891Z,1513274709.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:10.296Z,1513274710.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:10.674Z,1513274710.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:11.074Z,1513274711.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:11.476Z,1513274711.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:11.879Z,1513274711.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:12.342Z,1513274712.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:12.691Z,1513274712.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:13.095Z,1513274713.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:13.488Z,1513274713.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:13.866Z,1513274713.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:14.391Z,1513274714.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:14.688Z,1513274714.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:15.084Z,1513274715.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:15.484Z,1513274715.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:15.884Z,1513274715.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:16.287Z,1513274716.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:16.688Z,1513274716.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:17.091Z,1513274717.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:17.496Z,1513274717.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:17.974Z,1513274717.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:18.304Z,1513274718.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:18.679Z,1513274718.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:19.078Z,1513274719.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:19.478Z,1513274719.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:20.002Z,1513274720.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:20.292Z,1513274720.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:20.722Z,1513274720.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:21.081Z,1513274721.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:21.534Z,1513274721.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:21.879Z,1513274721.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:22.311Z,1513274722.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:22.686Z,1513274722.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:23.127Z,1513274723.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:23.492Z,1513274723.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:23.895Z,1513274723.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:24.316Z,1513274724.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:24.694Z,1513274724.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:25.091Z,1513274725.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:25.491Z,1513274725.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:25.872Z,1513274725.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:26.361Z,1513274726.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:26.703Z,1513274726.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:27.095Z,1513274727.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:27.480Z,1513274727.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:27.879Z,1513274727.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:28.359Z,1513274728.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:28.688Z,1513274728.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:29.091Z,1513274729.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:29.496Z,1513274729.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:29.969Z,1513274729.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:30.300Z,1513274730.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:30.671Z,1513274730.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:31.075Z,1513274731.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:31.511Z,1513274731.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:31.872Z,1513274731.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:32.294Z,1513274732.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:32.689Z,1513274732.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:33.099Z,1513274733.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:33.481Z,1513274733.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:33.883Z,1513274733.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:34.300Z,1513274734.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:34.675Z,1513274734.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:35.082Z,1513274735.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:35.500Z,1513274735.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:35.960Z,1513274735.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:36.291Z,1513274736.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:36.704Z,1513274736.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:37.070Z,1513274737.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:37.474Z,1513274737.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:37.874Z,1513274737.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:38.285Z,1513274738.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:38.699Z,1513274738.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:39.100Z,1513274739.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:39.468Z,1513274739.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:39.895Z,1513274739.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:40.369Z,1513274740.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:40.675Z,1513274740.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:41.076Z,1513274741.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:41.480Z,1513274741.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:41.883Z,1513274741.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:42.347Z,1513274742.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:42.691Z,1513274742.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:43.089Z,1513274743.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:43.089Z,1513274743.089 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 350
2017-12-14T18:05:43.089Z,1513274743.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:05:43.091Z,1513274743.091 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:43.091Z,1513274743.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 350
2017-12-14T18:05:43.091Z,1513274743.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:05:43.097Z,1513274743.097 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:43.097Z,1513274743.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 350
2017-12-14T18:05:43.097Z,1513274743.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:05:43.130Z,1513274743.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:05:43.130Z,1513274743.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:05:43.130Z,1513274743.130 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:05:43.546Z,1513274743.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:05:43.546Z,1513274743.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 350
2017-12-14T18:05:43.547Z,1513274743.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:05:43.547Z,1513274743.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 350
2017-12-14T18:05:43.547Z,1513274743.547 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:05:43.547Z,1513274743.547 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 350
2017-12-14T18:05:43.889Z,1513274743.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:05:43.889Z,1513274743.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:05:43.890Z,1513274743.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:05:43.890Z,1513274743.890 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:05:43.890Z,1513274743.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:05:43.891Z,1513274743.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:05:43.891Z,1513274743.891 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:05:43.891Z,1513274743.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:05:43.925Z,1513274743.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:05:44.312Z,1513274744.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:44.707Z,1513274744.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:45.078Z,1513274745.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:45.507Z,1513274745.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:45.873Z,1513274745.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:46.287Z,1513274746.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:46.684Z,1513274746.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:47.080Z,1513274747.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:47.521Z,1513274747.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:47.875Z,1513274747.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:48.282Z,1513274748.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:48.694Z,1513274748.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:49.092Z,1513274749.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:49.499Z,1513274749.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:49.934Z,1513274749.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:50.295Z,1513274750.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:53.712Z,1513274753.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:53.847Z,1513274753.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:54.216Z,1513274754.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:54.619Z,1513274754.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:55.019Z,1513274755.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:55.405Z,1513274755.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:55.798Z,1513274755.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:56.209Z,1513274756.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:56.602Z,1513274756.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:57.000Z,1513274757.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:57.409Z,1513274757.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:57.812Z,1513274757.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:58.219Z,1513274758.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:58.605Z,1513274758.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:58.999Z,1513274758.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:59.401Z,1513274759.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:05:59.807Z,1513274759.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:00.271Z,1513274760.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:00.624Z,1513274760.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:01.019Z,1513274761.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:01.405Z,1513274761.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:01.802Z,1513274761.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:02.216Z,1513274762.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:02.615Z,1513274762.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:03.012Z,1513274763.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:03.448Z,1513274763.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:03.819Z,1513274763.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:04.216Z,1513274764.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:04.601Z,1513274764.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:04.994Z,1513274764.994 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T18:06:04.994Z,1513274764.994 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:06:04.994Z,1513274764.994 [BPC1](ERROR): Data Fault
2017-12-14T18:06:05.002Z,1513274765.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:05.015Z,1513274765.015 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:06:05.408Z,1513274765.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:05.807Z,1513274765.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:06.208Z,1513274766.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:06.221Z,1513274766.221 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:06:06.221Z,1513274766.221 [BPC1] No Fault, FailCount= 1
2017-12-14T18:06:06.727Z,1513274766.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:07.019Z,1513274767.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:07.411Z,1513274767.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:07.803Z,1513274767.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:08.207Z,1513274768.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:08.615Z,1513274768.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:08.992Z,1513274768.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:09.419Z,1513274769.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:09.870Z,1513274769.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:10.214Z,1513274770.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:10.598Z,1513274770.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:10.999Z,1513274770.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:11.404Z,1513274771.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:11.803Z,1513274771.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:12.236Z,1513274772.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:12.608Z,1513274772.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:13.050Z,1513274773.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:13.415Z,1513274773.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:13.808Z,1513274773.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:14.207Z,1513274774.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:14.603Z,1513274774.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:15.039Z,1513274775.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:15.411Z,1513274775.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:15.823Z,1513274775.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:16.263Z,1513274776.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:16.606Z,1513274776.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:17.007Z,1513274777.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:17.406Z,1513274777.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:17.807Z,1513274777.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:18.259Z,1513274778.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:18.616Z,1513274778.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:19.022Z,1513274779.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:19.446Z,1513274779.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:19.852Z,1513274779.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:20.230Z,1513274780.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:20.613Z,1513274780.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:21.008Z,1513274781.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:21.432Z,1513274781.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:21.831Z,1513274781.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:22.308Z,1513274782.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:22.603Z,1513274782.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:23.025Z,1513274783.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:23.436Z,1513274783.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:23.858Z,1513274783.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:24.287Z,1513274784.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:24.647Z,1513274784.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:25.023Z,1513274785.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:25.408Z,1513274785.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:25.806Z,1513274785.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:26.226Z,1513274786.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:26.631Z,1513274786.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:27.064Z,1513274787.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:27.426Z,1513274787.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:27.804Z,1513274787.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:28.282Z,1513274788.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:28.636Z,1513274788.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:29.034Z,1513274789.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:29.419Z,1513274789.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:29.849Z,1513274789.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:30.220Z,1513274790.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:30.645Z,1513274790.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:31.023Z,1513274791.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:31.438Z,1513274791.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:31.834Z,1513274791.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:32.210Z,1513274792.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:32.673Z,1513274792.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:33.031Z,1513274793.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:33.430Z,1513274793.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:33.835Z,1513274793.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:34.233Z,1513274794.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:34.610Z,1513274794.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:35.015Z,1513274795.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:35.419Z,1513274795.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:35.855Z,1513274795.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:36.307Z,1513274796.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:36.645Z,1513274796.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:37.099Z,1513274797.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:37.453Z,1513274797.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:37.806Z,1513274797.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:38.220Z,1513274798.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:38.638Z,1513274798.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:39.115Z,1513274799.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:39.419Z,1513274799.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:39.828Z,1513274799.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:40.244Z,1513274800.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:40.628Z,1513274800.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:41.025Z,1513274801.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:41.438Z,1513274801.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:41.829Z,1513274801.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:42.232Z,1513274802.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:42.634Z,1513274802.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:43.031Z,1513274803.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:43.415Z,1513274803.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:43.805Z,1513274803.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:44.247Z,1513274804.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:44.611Z,1513274804.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:45.036Z,1513274805.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:45.423Z,1513274805.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:45.853Z,1513274805.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:46.242Z,1513274806.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:46.614Z,1513274806.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:47.039Z,1513274807.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:47.415Z,1513274807.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:47.820Z,1513274807.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:48.203Z,1513274808.203 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T18:06:48.203Z,1513274808.203 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:06:48.203Z,1513274808.203 [BPC1](ERROR): Data Fault
2017-12-14T18:06:48.211Z,1513274808.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:48.224Z,1513274808.224 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:06:48.624Z,1513274808.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:49.010Z,1513274809.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:49.403Z,1513274809.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:49.416Z,1513274809.416 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:06:49.416Z,1513274809.416 [BPC1] No Fault, FailCount= 1
2017-12-14T18:06:49.855Z,1513274809.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:50.215Z,1513274810.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:50.605Z,1513274810.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:53.998Z,1513274813.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:54.135Z,1513274814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:54.476Z,1513274814.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:54.887Z,1513274814.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:55.268Z,1513274815.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:55.666Z,1513274815.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:56.067Z,1513274816.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:56.477Z,1513274816.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:56.883Z,1513274816.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:57.283Z,1513274817.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:57.668Z,1513274817.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:58.095Z,1513274818.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:58.463Z,1513274818.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:58.871Z,1513274818.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:59.293Z,1513274819.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:06:59.683Z,1513274819.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:00.074Z,1513274820.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:00.467Z,1513274820.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:00.863Z,1513274820.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:01.295Z,1513274821.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:01.667Z,1513274821.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:02.067Z,1513274822.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:02.483Z,1513274822.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:02.887Z,1513274822.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:03.303Z,1513274823.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:03.673Z,1513274823.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:04.067Z,1513274824.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:04.479Z,1513274824.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:04.867Z,1513274824.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:05.283Z,1513274825.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:05.680Z,1513274825.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:06.076Z,1513274826.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:06.467Z,1513274826.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:06.863Z,1513274826.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:07.267Z,1513274827.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:07.680Z,1513274827.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:08.092Z,1513274828.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:08.476Z,1513274828.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:08.876Z,1513274828.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:09.283Z,1513274829.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:09.691Z,1513274829.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:10.067Z,1513274830.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:10.487Z,1513274830.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:10.886Z,1513274830.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:11.310Z,1513274831.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:11.741Z,1513274831.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:12.083Z,1513274832.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:12.475Z,1513274832.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:12.872Z,1513274832.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:13.275Z,1513274833.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:13.675Z,1513274833.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:14.098Z,1513274834.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:14.487Z,1513274834.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:14.891Z,1513274834.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:15.280Z,1513274835.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:15.678Z,1513274835.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:16.088Z,1513274836.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:16.480Z,1513274836.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:16.873Z,1513274836.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:17.322Z,1513274837.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:17.688Z,1513274837.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:18.083Z,1513274838.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:18.471Z,1513274838.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:18.874Z,1513274838.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:19.343Z,1513274839.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:19.680Z,1513274839.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:20.087Z,1513274840.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:20.532Z,1513274840.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:20.886Z,1513274840.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:21.275Z,1513274841.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:21.678Z,1513274841.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:22.084Z,1513274842.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:22.496Z,1513274842.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:22.895Z,1513274842.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:23.291Z,1513274843.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:23.717Z,1513274843.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:24.075Z,1513274844.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:24.486Z,1513274844.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:24.877Z,1513274844.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:25.295Z,1513274845.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:25.695Z,1513274845.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:26.091Z,1513274846.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:26.479Z,1513274846.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:26.926Z,1513274846.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:27.282Z,1513274847.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:27.675Z,1513274847.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:28.087Z,1513274848.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:28.490Z,1513274848.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:28.894Z,1513274848.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:29.295Z,1513274849.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:29.662Z,1513274849.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:30.195Z,1513274850.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:30.476Z,1513274850.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:30.964Z,1513274850.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:31.300Z,1513274851.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:31.726Z,1513274851.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:32.078Z,1513274852.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:32.477Z,1513274852.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:32.899Z,1513274852.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:33.304Z,1513274853.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:33.704Z,1513274853.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:34.073Z,1513274854.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:34.507Z,1513274854.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:34.882Z,1513274854.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:35.278Z,1513274855.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:35.676Z,1513274855.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:36.075Z,1513274856.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:36.528Z,1513274856.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:36.880Z,1513274856.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:37.285Z,1513274857.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:37.715Z,1513274857.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:38.088Z,1513274858.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:38.476Z,1513274858.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:38.875Z,1513274858.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:39.276Z,1513274859.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:39.725Z,1513274859.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:40.081Z,1513274860.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:40.488Z,1513274860.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:40.895Z,1513274860.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:41.286Z,1513274861.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:41.684Z,1513274861.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:42.102Z,1513274862.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:42.481Z,1513274862.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:42.940Z,1513274862.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:43.286Z,1513274863.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:43.691Z,1513274863.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:44.086Z,1513274864.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:44.481Z,1513274864.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:44.880Z,1513274864.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:45.269Z,1513274865.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:45.663Z,1513274865.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:46.112Z,1513274866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:46.507Z,1513274866.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:46.895Z,1513274866.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:47.293Z,1513274867.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:47.667Z,1513274867.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:48.075Z,1513274868.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:48.482Z,1513274868.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:48.875Z,1513274868.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:49.332Z,1513274869.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:49.688Z,1513274869.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:50.087Z,1513274870.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:50.483Z,1513274870.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:50.876Z,1513274870.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:54.438Z,1513274874.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:54.548Z,1513274874.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:54.940Z,1513274874.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:55.374Z,1513274875.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:55.747Z,1513274875.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:56.152Z,1513274876.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:56.536Z,1513274876.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:56.935Z,1513274876.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:57.347Z,1513274877.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:57.742Z,1513274877.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:58.136Z,1513274878.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:58.522Z,1513274878.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:58.951Z,1513274878.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:59.339Z,1513274879.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:07:59.714Z,1513274879.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:00.145Z,1513274880.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:00.544Z,1513274880.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:00.940Z,1513274880.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:01.321Z,1513274881.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:01.722Z,1513274881.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:02.160Z,1513274882.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:02.540Z,1513274882.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:02.928Z,1513274882.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:03.326Z,1513274883.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:03.726Z,1513274883.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:04.082Z,1513274884.082 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T18:08:04.083Z,1513274884.083 [NAL9602] Data Fault, FailCount= 1
2017-12-14T18:08:04.083Z,1513274884.083 [NAL9602](ERROR): Data Fault
2017-12-14T18:08:04.134Z,1513274884.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:04.156Z,1513274884.156 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T18:08:04.482Z,1513274884.482 [NAL9602](INFO): Powering down
2017-12-14T18:08:04.555Z,1513274884.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:04.922Z,1513274884.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:05.335Z,1513274885.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:05.385Z,1513274885.385 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T18:08:05.385Z,1513274885.385 [NAL9602] No Fault, FailCount= 1
2017-12-14T18:08:05.732Z,1513274885.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:06.131Z,1513274886.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:06.531Z,1513274886.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:06.935Z,1513274886.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:07.329Z,1513274887.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:07.732Z,1513274887.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:08.131Z,1513274888.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:08.535Z,1513274888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:08.932Z,1513274888.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:09.325Z,1513274889.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:09.741Z,1513274889.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:10.139Z,1513274890.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:10.519Z,1513274890.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:11.010Z,1513274891.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:11.319Z,1513274891.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:11.720Z,1513274891.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:12.122Z,1513274892.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:12.531Z,1513274892.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:12.931Z,1513274892.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:13.326Z,1513274893.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:13.724Z,1513274893.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:14.131Z,1513274894.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:14.524Z,1513274894.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:14.940Z,1513274894.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:15.330Z,1513274895.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:15.758Z,1513274895.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:16.147Z,1513274896.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:16.564Z,1513274896.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:16.947Z,1513274896.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:17.354Z,1513274897.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:17.722Z,1513274897.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:18.195Z,1513274898.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:18.544Z,1513274898.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:18.920Z,1513274898.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:19.322Z,1513274899.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:19.715Z,1513274899.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:20.122Z,1513274900.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:20.528Z,1513274900.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:20.923Z,1513274900.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:21.361Z,1513274901.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:21.727Z,1513274901.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:22.122Z,1513274902.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:22.527Z,1513274902.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:22.927Z,1513274902.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:23.327Z,1513274903.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:23.735Z,1513274903.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:24.134Z,1513274904.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:24.591Z,1513274904.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:24.940Z,1513274904.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:25.313Z,1513274905.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:25.714Z,1513274905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:26.138Z,1513274906.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:26.559Z,1513274906.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:26.915Z,1513274906.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:27.338Z,1513274907.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:27.791Z,1513274907.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:28.142Z,1513274908.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:28.586Z,1513274908.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:28.914Z,1513274908.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:29.321Z,1513274909.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:29.717Z,1513274909.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:30.121Z,1513274910.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:30.523Z,1513274910.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:30.929Z,1513274910.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:31.323Z,1513274911.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:31.720Z,1513274911.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:32.128Z,1513274912.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:32.527Z,1513274912.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:32.928Z,1513274912.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:33.323Z,1513274913.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:33.723Z,1513274913.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:34.144Z,1513274914.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:34.483Z,1513274914.483 [NAL9602](INFO): Powering up NAL9602
2017-12-14T18:08:34.531Z,1513274914.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:34.926Z,1513274914.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:35.335Z,1513274915.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:35.724Z,1513274915.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:36.124Z,1513274916.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:36.535Z,1513274916.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:36.955Z,1513274916.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:37.330Z,1513274917.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:37.726Z,1513274917.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:38.129Z,1513274918.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:38.540Z,1513274918.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:38.955Z,1513274918.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:39.343Z,1513274919.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:39.756Z,1513274919.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:40.144Z,1513274920.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:40.551Z,1513274920.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:40.920Z,1513274920.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:41.323Z,1513274921.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:41.723Z,1513274921.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:42.123Z,1513274922.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:42.527Z,1513274922.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:42.923Z,1513274922.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:43.323Z,1513274923.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:43.720Z,1513274923.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:44.142Z,1513274924.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:44.142Z,1513274924.142 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 351
2017-12-14T18:08:44.142Z,1513274924.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:08:44.144Z,1513274924.144 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:44.144Z,1513274924.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 351
2017-12-14T18:08:44.144Z,1513274924.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:08:44.162Z,1513274924.162 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:44.162Z,1513274924.162 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 351
2017-12-14T18:08:44.162Z,1513274924.162 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:08:44.204Z,1513274924.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:08:44.204Z,1513274924.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:08:44.220Z,1513274924.220 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:08:44.531Z,1513274924.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:08:44.531Z,1513274924.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 351
2017-12-14T18:08:44.532Z,1513274924.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:08:44.532Z,1513274924.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 351
2017-12-14T18:08:44.532Z,1513274924.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:08:44.532Z,1513274924.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 351
2017-12-14T18:08:44.920Z,1513274924.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:08:44.925Z,1513274924.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:08:44.925Z,1513274924.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:08:44.926Z,1513274924.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:08:44.926Z,1513274924.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:08:44.926Z,1513274924.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:08:44.927Z,1513274924.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:08:44.927Z,1513274924.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:08:44.927Z,1513274924.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:08:45.334Z,1513274925.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:45.683Z,1513274925.683 [NAL9602](INFO): NAL9602 initialized
2017-12-14T18:08:45.733Z,1513274925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:46.123Z,1513274926.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:46.541Z,1513274926.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:46.943Z,1513274926.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:47.336Z,1513274927.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:47.736Z,1513274927.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:48.128Z,1513274928.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:48.532Z,1513274928.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:48.974Z,1513274928.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:49.336Z,1513274929.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:49.736Z,1513274929.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:49.739Z,1513274929.739 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T18:08:49.739Z,1513274929.739 [Default:CheckIn:C.Wait] Stopped
2017-12-14T18:08:49.739Z,1513274929.739 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T18:08:49.739Z,1513274929.739 [Default:CheckIn:D] Running Loop=1
2017-12-14T18:08:50.127Z,1513274930.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:50.131Z,1513274930.131 [Default:CheckIn:D] Stopped
2017-12-14T18:08:50.131Z,1513274930.131 [Default:CheckIn:E] Running Loop=1
2017-12-14T18:08:50.583Z,1513274930.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:50.590Z,1513274930.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1055.579036 min 
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn:E] Stopped
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn] Stopped
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn](INFO): Running loop #102
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn] Running Loop=102
2017-12-14T18:08:50.591Z,1513274930.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T18:08:50.592Z,1513274930.592 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T18:08:50.930Z,1513274930.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:54.443Z,1513274934.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:54.576Z,1513274934.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:54.949Z,1513274934.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:55.350Z,1513274935.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:55.754Z,1513274935.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:56.136Z,1513274936.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:56.542Z,1513274936.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:56.940Z,1513274936.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:57.379Z,1513274937.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:57.742Z,1513274937.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:58.146Z,1513274938.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:58.548Z,1513274938.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:58.954Z,1513274938.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:59.342Z,1513274939.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:08:59.763Z,1513274939.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:00.157Z,1513274940.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:00.553Z,1513274940.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:00.976Z,1513274940.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:01.353Z,1513274941.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:01.792Z,1513274941.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:02.161Z,1513274942.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:02.592Z,1513274942.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:02.947Z,1513274942.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:03.407Z,1513274943.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:03.761Z,1513274943.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:04.167Z,1513274944.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:04.559Z,1513274944.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:04.935Z,1513274944.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:05.328Z,1513274945.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:05.758Z,1513274945.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:06.159Z,1513274946.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:06.626Z,1513274946.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:06.933Z,1513274946.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:07.335Z,1513274947.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:07.743Z,1513274947.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:08.139Z,1513274948.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:08.536Z,1513274948.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:08.962Z,1513274948.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:09.363Z,1513274949.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:09.842Z,1513274949.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:10.139Z,1513274950.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:10.536Z,1513274950.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:10.968Z,1513274950.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:11.347Z,1513274951.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:11.751Z,1513274951.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:12.143Z,1513274952.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:12.579Z,1513274952.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:12.995Z,1513274952.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:13.342Z,1513274953.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:13.745Z,1513274953.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:14.151Z,1513274954.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:14.545Z,1513274954.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:14.936Z,1513274954.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:15.342Z,1513274955.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:15.739Z,1513274955.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:16.199Z,1513274956.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:16.553Z,1513274956.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:16.960Z,1513274956.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:17.333Z,1513274957.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:17.747Z,1513274957.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:18.147Z,1513274958.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:18.542Z,1513274958.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:18.955Z,1513274958.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:19.423Z,1513274959.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:19.751Z,1513274959.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:20.146Z,1513274960.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:20.546Z,1513274960.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:20.942Z,1513274960.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:21.346Z,1513274961.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:21.745Z,1513274961.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:22.175Z,1513274962.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:22.571Z,1513274962.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:22.961Z,1513274962.961 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T18:09:22.961Z,1513274962.961 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:09:22.961Z,1513274962.961 [BPC1](ERROR): Data Fault
2017-12-14T18:09:22.969Z,1513274962.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:22.983Z,1513274962.983 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:09:23.336Z,1513274963.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:23.734Z,1513274963.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:24.137Z,1513274964.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:24.172Z,1513274964.172 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:09:24.172Z,1513274964.172 [BPC1] No Fault, FailCount= 1
2017-12-14T18:09:24.590Z,1513274964.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:24.938Z,1513274964.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:25.348Z,1513274965.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:25.781Z,1513274965.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:26.139Z,1513274966.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:26.544Z,1513274966.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:26.939Z,1513274966.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:27.337Z,1513274967.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:27.744Z,1513274967.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:28.141Z,1513274968.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:28.539Z,1513274968.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:28.977Z,1513274968.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:29.336Z,1513274969.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:29.736Z,1513274969.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:29.749Z,1513274969.749 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:09:30.155Z,1513274970.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:30.549Z,1513274970.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:30.948Z,1513274970.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:31.340Z,1513274971.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:31.737Z,1513274971.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:32.202Z,1513274972.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:32.581Z,1513274972.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:32.983Z,1513274972.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:33.359Z,1513274973.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:33.752Z,1513274973.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:34.147Z,1513274974.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:34.552Z,1513274974.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:34.943Z,1513274974.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:35.395Z,1513274975.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:35.745Z,1513274975.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:36.152Z,1513274976.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:36.556Z,1513274976.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:36.955Z,1513274976.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:37.340Z,1513274977.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:37.769Z,1513274977.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:38.143Z,1513274978.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:38.579Z,1513274978.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:38.947Z,1513274978.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:39.344Z,1513274979.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:39.752Z,1513274979.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:40.143Z,1513274980.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:40.534Z,1513274980.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:40.968Z,1513274980.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:41.343Z,1513274981.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:41.795Z,1513274981.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:42.149Z,1513274982.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:42.548Z,1513274982.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:42.941Z,1513274982.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:43.348Z,1513274983.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:43.741Z,1513274983.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:44.146Z,1513274984.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:44.584Z,1513274984.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:44.971Z,1513274984.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:45.375Z,1513274985.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:45.728Z,1513274985.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:46.163Z,1513274986.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:46.559Z,1513274986.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:46.957Z,1513274986.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:47.355Z,1513274987.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:47.755Z,1513274987.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:48.203Z,1513274988.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:48.532Z,1513274988.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:48.936Z,1513274988.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:49.329Z,1513274989.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:49.756Z,1513274989.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:50.163Z,1513274990.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:50.563Z,1513274990.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:50.934Z,1513274990.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:54.531Z,1513274994.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:54.683Z,1513274994.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:55.060Z,1513274995.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:55.470Z,1513274995.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:55.866Z,1513274995.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:56.248Z,1513274996.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:56.638Z,1513274996.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:57.043Z,1513274997.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:57.437Z,1513274997.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:57.863Z,1513274997.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:58.256Z,1513274998.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:58.664Z,1513274998.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:59.039Z,1513274999.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:59.432Z,1513274999.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:09:59.837Z,1513274999.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:00.243Z,1513275000.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:00.640Z,1513275000.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:01.099Z,1513275001.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:01.476Z,1513275001.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:01.840Z,1513275001.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:02.244Z,1513275002.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:02.639Z,1513275002.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:03.074Z,1513275003.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:03.447Z,1513275003.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:03.849Z,1513275003.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:04.305Z,1513275004.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:04.655Z,1513275004.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:05.043Z,1513275005.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:05.442Z,1513275005.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:05.842Z,1513275005.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:06.371Z,1513275006.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:06.647Z,1513275006.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:07.053Z,1513275007.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:07.535Z,1513275007.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:07.859Z,1513275007.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:08.336Z,1513275008.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:08.643Z,1513275008.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:09.047Z,1513275009.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:09.447Z,1513275009.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:09.856Z,1513275009.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:10.259Z,1513275010.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:10.676Z,1513275010.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:11.047Z,1513275011.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:11.439Z,1513275011.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:11.844Z,1513275011.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:12.243Z,1513275012.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:12.647Z,1513275012.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:13.052Z,1513275013.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:13.453Z,1513275013.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:13.925Z,1513275013.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:14.248Z,1513275014.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:14.652Z,1513275014.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:15.049Z,1513275015.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:15.448Z,1513275015.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:15.858Z,1513275015.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:16.257Z,1513275016.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:16.679Z,1513275016.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:17.038Z,1513275017.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:17.441Z,1513275017.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:17.840Z,1513275017.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:18.241Z,1513275018.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:18.666Z,1513275018.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:19.044Z,1513275019.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:19.467Z,1513275019.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:19.848Z,1513275019.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:20.355Z,1513275020.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:20.653Z,1513275020.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:21.051Z,1513275021.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:21.450Z,1513275021.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:21.854Z,1513275021.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:22.327Z,1513275022.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:22.656Z,1513275022.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:23.046Z,1513275023.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:23.447Z,1513275023.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:23.843Z,1513275023.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:24.251Z,1513275024.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:24.648Z,1513275024.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:25.061Z,1513275025.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:25.460Z,1513275025.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:25.859Z,1513275025.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:26.235Z,1513275026.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:26.706Z,1513275026.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:27.065Z,1513275027.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:27.439Z,1513275027.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:27.879Z,1513275027.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:28.252Z,1513275028.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:28.711Z,1513275028.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:29.040Z,1513275029.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:29.484Z,1513275029.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:29.867Z,1513275029.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:30.264Z,1513275030.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:30.636Z,1513275030.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:31.044Z,1513275031.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:31.451Z,1513275031.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:31.840Z,1513275031.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:32.239Z,1513275032.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:32.636Z,1513275032.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:33.038Z,1513275033.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:33.443Z,1513275033.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:33.848Z,1513275033.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:34.335Z,1513275034.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:34.644Z,1513275034.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:35.043Z,1513275035.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:35.442Z,1513275035.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:35.842Z,1513275035.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:36.382Z,1513275036.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:36.640Z,1513275036.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:37.055Z,1513275037.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:37.448Z,1513275037.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:37.848Z,1513275037.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:38.252Z,1513275038.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:38.664Z,1513275038.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:39.048Z,1513275039.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:39.448Z,1513275039.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:39.863Z,1513275039.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:40.264Z,1513275040.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:40.644Z,1513275040.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:41.039Z,1513275041.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:41.439Z,1513275041.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:41.858Z,1513275041.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:42.238Z,1513275042.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:42.677Z,1513275042.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:43.047Z,1513275043.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:43.448Z,1513275043.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:43.848Z,1513275043.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:44.246Z,1513275044.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:44.639Z,1513275044.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:45.047Z,1513275045.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:45.439Z,1513275045.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:45.879Z,1513275045.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:46.257Z,1513275046.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:46.659Z,1513275046.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:47.046Z,1513275047.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:47.445Z,1513275047.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:47.849Z,1513275047.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:48.308Z,1513275048.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:48.638Z,1513275048.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:49.064Z,1513275049.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:49.459Z,1513275049.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:49.853Z,1513275049.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:50.314Z,1513275050.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:50.671Z,1513275050.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:51.083Z,1513275051.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:54.698Z,1513275054.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:54.826Z,1513275054.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:55.198Z,1513275055.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:55.623Z,1513275055.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:56.019Z,1513275056.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:56.420Z,1513275056.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:56.799Z,1513275056.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:57.195Z,1513275057.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:57.601Z,1513275057.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:58.027Z,1513275058.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:58.386Z,1513275058.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:58.780Z,1513275058.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:59.203Z,1513275059.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:10:59.575Z,1513275059.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:00.057Z,1513275060.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:00.391Z,1513275060.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:00.806Z,1513275060.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:01.196Z,1513275061.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:01.597Z,1513275061.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:01.990Z,1513275061.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:02.384Z,1513275062.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:02.799Z,1513275062.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:03.194Z,1513275063.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:03.590Z,1513275063.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:03.993Z,1513275063.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:04.396Z,1513275064.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:04.839Z,1513275064.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:05.203Z,1513275065.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:05.608Z,1513275065.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:06.028Z,1513275066.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:06.410Z,1513275066.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:06.799Z,1513275066.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:07.199Z,1513275067.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:07.600Z,1513275067.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:08.072Z,1513275068.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:08.397Z,1513275068.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:08.803Z,1513275068.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:09.174Z,1513275069.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:09.606Z,1513275069.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:10.018Z,1513275070.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:10.403Z,1513275070.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:10.791Z,1513275070.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:11.222Z,1513275071.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:11.591Z,1513275071.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:12.030Z,1513275072.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:12.394Z,1513275072.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:12.806Z,1513275072.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:13.203Z,1513275073.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:13.607Z,1513275073.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:14.028Z,1513275074.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:14.445Z,1513275074.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:14.794Z,1513275074.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:15.215Z,1513275075.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:15.596Z,1513275075.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:15.988Z,1513275075.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:16.386Z,1513275076.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:16.983Z,1513275076.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:17.227Z,1513275077.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:17.616Z,1513275077.616 [PNI_TCM](ERROR): CRC does not match. Expected:0x26985 got:0x288
2017-12-14T18:11:17.691Z,1513275077.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:18.008Z,1513275078.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:18.483Z,1513275078.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:18.805Z,1513275078.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:19.207Z,1513275079.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:19.662Z,1513275079.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:20.055Z,1513275080.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:20.416Z,1513275080.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:20.783Z,1513275080.783 [PNI_TCM](ERROR): CRC does not match. Expected:0x43965 got:0x256
2017-12-14T18:11:20.838Z,1513275080.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:21.218Z,1513275081.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:21.619Z,1513275081.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:22.009Z,1513275082.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:22.391Z,1513275082.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:22.805Z,1513275082.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:23.201Z,1513275083.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:23.608Z,1513275083.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:24.051Z,1513275084.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:24.411Z,1513275084.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:24.806Z,1513275084.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:25.209Z,1513275085.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:25.618Z,1513275085.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:26.043Z,1513275086.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:26.383Z,1513275086.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:26.851Z,1513275086.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:27.194Z,1513275087.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:27.619Z,1513275087.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:28.068Z,1513275088.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:28.410Z,1513275088.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:28.794Z,1513275088.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:29.244Z,1513275089.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:29.600Z,1513275089.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:30.027Z,1513275090.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:30.436Z,1513275090.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:30.826Z,1513275090.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:31.217Z,1513275091.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:31.625Z,1513275091.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:31.995Z,1513275091.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:32.436Z,1513275092.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:32.801Z,1513275092.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:33.204Z,1513275093.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:33.599Z,1513275093.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:34.061Z,1513275094.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:34.408Z,1513275094.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:34.807Z,1513275094.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:35.208Z,1513275095.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:35.604Z,1513275095.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:36.080Z,1513275096.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:36.410Z,1513275096.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:36.807Z,1513275096.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:37.235Z,1513275097.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:37.615Z,1513275097.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:38.058Z,1513275098.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:38.422Z,1513275098.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:38.874Z,1513275098.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:39.219Z,1513275099.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:39.630Z,1513275099.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:40.086Z,1513275100.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:40.491Z,1513275100.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:40.814Z,1513275100.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:41.221Z,1513275101.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:41.599Z,1513275101.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:42.075Z,1513275102.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:42.409Z,1513275102.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:42.804Z,1513275102.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:43.210Z,1513275103.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:43.619Z,1513275103.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:44.019Z,1513275104.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:44.394Z,1513275104.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:44.837Z,1513275104.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:45.198Z,1513275105.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:45.198Z,1513275105.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 352
2017-12-14T18:11:45.199Z,1513275105.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:11:45.200Z,1513275105.200 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:45.200Z,1513275105.200 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 352
2017-12-14T18:11:45.200Z,1513275105.200 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:11:45.215Z,1513275105.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:45.215Z,1513275105.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 352
2017-12-14T18:11:45.215Z,1513275105.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:11:45.251Z,1513275105.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:11:45.252Z,1513275105.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:11:45.252Z,1513275105.252 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:11:45.642Z,1513275105.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:11:45.642Z,1513275105.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 352
2017-12-14T18:11:45.642Z,1513275105.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:11:45.642Z,1513275105.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 352
2017-12-14T18:11:45.643Z,1513275105.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:11:45.643Z,1513275105.643 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 352
2017-12-14T18:11:45.994Z,1513275105.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:11:45.995Z,1513275105.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:11:45.995Z,1513275105.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:11:45.995Z,1513275105.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:11:45.996Z,1513275105.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:11:45.996Z,1513275105.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:11:45.996Z,1513275105.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:11:46.005Z,1513275106.005 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:11:46.006Z,1513275106.006 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:11:46.391Z,1513275106.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:46.812Z,1513275106.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:47.231Z,1513275107.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:47.612Z,1513275107.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:48.070Z,1513275108.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:48.391Z,1513275108.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:48.840Z,1513275108.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:49.196Z,1513275109.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:49.603Z,1513275109.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:50.005Z,1513275110.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:50.384Z,1513275110.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:50.797Z,1513275110.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:51.211Z,1513275111.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:54.751Z,1513275114.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:54.867Z,1513275114.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:55.254Z,1513275115.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:55.639Z,1513275115.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:56.053Z,1513275116.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:56.451Z,1513275116.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:56.868Z,1513275116.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:57.263Z,1513275117.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:57.658Z,1513275117.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:58.026Z,1513275118.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:58.439Z,1513275118.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:58.830Z,1513275118.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:59.228Z,1513275119.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:11:59.635Z,1513275119.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:00.089Z,1513275120.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:00.451Z,1513275120.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:00.914Z,1513275120.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:01.237Z,1513275121.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:01.677Z,1513275121.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:02.031Z,1513275122.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:02.455Z,1513275122.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:02.856Z,1513275122.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:03.308Z,1513275123.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:03.661Z,1513275123.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:04.049Z,1513275124.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:04.443Z,1513275124.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:04.851Z,1513275124.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:05.246Z,1513275125.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:05.619Z,1513275125.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:06.050Z,1513275126.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:06.468Z,1513275126.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:06.856Z,1513275126.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:07.229Z,1513275127.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:07.624Z,1513275127.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:08.052Z,1513275128.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:08.435Z,1513275128.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:08.836Z,1513275128.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:09.243Z,1513275129.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:09.711Z,1513275129.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:10.069Z,1513275130.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:10.430Z,1513275130.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:10.868Z,1513275130.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:11.236Z,1513275131.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:11.699Z,1513275131.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:12.041Z,1513275132.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:12.447Z,1513275132.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:12.876Z,1513275132.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:13.230Z,1513275133.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:13.635Z,1513275133.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:14.032Z,1513275134.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:14.443Z,1513275134.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:14.845Z,1513275134.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:15.251Z,1513275135.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:15.641Z,1513275135.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:16.061Z,1513275136.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:16.439Z,1513275136.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:16.830Z,1513275136.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:17.229Z,1513275137.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:17.636Z,1513275137.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:18.043Z,1513275138.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:18.444Z,1513275138.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:18.841Z,1513275138.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:19.274Z,1513275139.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:19.641Z,1513275139.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:20.043Z,1513275140.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:20.435Z,1513275140.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:20.847Z,1513275140.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:21.248Z,1513275141.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:21.645Z,1513275141.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:22.046Z,1513275142.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:22.494Z,1513275142.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:22.887Z,1513275142.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:23.223Z,1513275143.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:23.620Z,1513275143.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:24.102Z,1513275144.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:24.445Z,1513275144.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:24.875Z,1513275144.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:25.227Z,1513275145.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:25.677Z,1513275145.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:26.054Z,1513275146.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:26.428Z,1513275146.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:26.851Z,1513275146.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:27.255Z,1513275147.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:27.659Z,1513275147.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:28.029Z,1513275148.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:28.429Z,1513275148.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:28.867Z,1513275148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:29.234Z,1513275149.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:29.631Z,1513275149.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:30.034Z,1513275150.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:30.440Z,1513275150.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:30.836Z,1513275150.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:31.232Z,1513275151.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:31.629Z,1513275151.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:32.084Z,1513275152.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:32.457Z,1513275152.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:32.849Z,1513275152.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:33.279Z,1513275153.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:33.650Z,1513275153.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:34.038Z,1513275154.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:34.436Z,1513275154.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:34.856Z,1513275154.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:35.331Z,1513275155.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:35.633Z,1513275155.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:36.039Z,1513275156.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:36.440Z,1513275156.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:36.848Z,1513275156.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:37.232Z,1513275157.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:37.636Z,1513275157.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:38.081Z,1513275158.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:38.462Z,1513275158.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:38.863Z,1513275158.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:39.244Z,1513275159.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:39.643Z,1513275159.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:40.040Z,1513275160.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:40.447Z,1513275160.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:40.837Z,1513275160.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:41.241Z,1513275161.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:41.688Z,1513275161.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:42.048Z,1513275162.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:42.459Z,1513275162.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:42.847Z,1513275162.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:43.243Z,1513275163.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:43.639Z,1513275163.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:44.035Z,1513275164.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:44.437Z,1513275164.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:44.888Z,1513275164.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:45.287Z,1513275165.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:45.647Z,1513275165.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:46.058Z,1513275166.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:46.435Z,1513275166.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:46.847Z,1513275166.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:47.242Z,1513275167.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:47.641Z,1513275167.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:48.067Z,1513275168.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:48.450Z,1513275168.450 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:12:48.450Z,1513275168.450 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:12:48.450Z,1513275168.450 [BPC1](ERROR): Communications Fault
2017-12-14T18:12:48.458Z,1513275168.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:48.472Z,1513275168.472 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:12:48.851Z,1513275168.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:49.224Z,1513275169.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:49.627Z,1513275169.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:49.665Z,1513275169.665 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:12:49.665Z,1513275169.665 [BPC1] No Fault, FailCount= 1
2017-12-14T18:12:50.094Z,1513275170.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:50.448Z,1513275170.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:50.907Z,1513275170.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:51.264Z,1513275171.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:54.755Z,1513275174.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:54.868Z,1513275174.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:55.232Z,1513275175.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:55.627Z,1513275175.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:56.033Z,1513275176.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:56.428Z,1513275176.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:56.856Z,1513275176.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:57.236Z,1513275177.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:57.667Z,1513275177.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:58.031Z,1513275178.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:58.467Z,1513275178.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:58.835Z,1513275178.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:59.233Z,1513275179.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:12:59.634Z,1513275179.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:00.037Z,1513275180.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:00.436Z,1513275180.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:00.884Z,1513275180.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:01.237Z,1513275181.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:01.631Z,1513275181.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:02.027Z,1513275182.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:02.436Z,1513275182.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:02.844Z,1513275182.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:03.251Z,1513275183.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:03.640Z,1513275183.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:04.090Z,1513275184.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:04.431Z,1513275184.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:04.853Z,1513275184.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:05.228Z,1513275185.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:05.636Z,1513275185.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:06.070Z,1513275186.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:06.440Z,1513275186.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:06.843Z,1513275186.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:07.243Z,1513275187.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:07.636Z,1513275187.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:08.067Z,1513275188.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:08.428Z,1513275188.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:08.851Z,1513275188.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:09.295Z,1513275189.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:09.651Z,1513275189.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:10.040Z,1513275190.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:10.435Z,1513275190.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:10.888Z,1513275190.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:11.236Z,1513275191.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:11.655Z,1513275191.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:12.045Z,1513275192.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:12.447Z,1513275192.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:12.840Z,1513275192.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:13.239Z,1513275193.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:13.636Z,1513275193.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:14.059Z,1513275194.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:14.444Z,1513275194.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:14.842Z,1513275194.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:15.256Z,1513275195.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:15.644Z,1513275195.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:16.044Z,1513275196.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:16.439Z,1513275196.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:16.839Z,1513275196.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:17.300Z,1513275197.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:17.639Z,1513275197.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:18.040Z,1513275198.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:18.447Z,1513275198.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:18.845Z,1513275198.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:19.236Z,1513275199.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:19.618Z,1513275199.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:20.099Z,1513275200.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:20.487Z,1513275200.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:20.837Z,1513275200.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:21.239Z,1513275201.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:21.636Z,1513275201.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:22.033Z,1513275202.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:22.436Z,1513275202.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:22.829Z,1513275202.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:23.236Z,1513275203.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:23.670Z,1513275203.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:24.037Z,1513275204.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:24.442Z,1513275204.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:24.841Z,1513275204.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:25.232Z,1513275205.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:25.631Z,1513275205.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:26.031Z,1513275206.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:26.432Z,1513275206.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:26.917Z,1513275206.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:27.241Z,1513275207.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:27.643Z,1513275207.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:28.040Z,1513275208.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:28.431Z,1513275208.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:28.839Z,1513275208.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:29.230Z,1513275209.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:29.634Z,1513275209.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:30.087Z,1513275210.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:30.494Z,1513275210.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:30.840Z,1513275210.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:31.234Z,1513275211.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:31.638Z,1513275211.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:32.035Z,1513275212.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:32.463Z,1513275212.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:32.848Z,1513275212.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:33.293Z,1513275213.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:33.679Z,1513275213.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:34.058Z,1513275214.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:34.479Z,1513275214.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:34.840Z,1513275214.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:35.226Z,1513275215.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:35.638Z,1513275215.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:36.051Z,1513275216.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:36.495Z,1513275216.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:36.833Z,1513275216.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:37.225Z,1513275217.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:37.636Z,1513275217.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:38.033Z,1513275218.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:38.427Z,1513275218.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:38.841Z,1513275218.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:39.237Z,1513275219.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:39.668Z,1513275219.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:40.027Z,1513275220.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:40.434Z,1513275220.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:40.833Z,1513275220.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:41.243Z,1513275221.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:41.666Z,1513275221.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:42.037Z,1513275222.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:42.440Z,1513275222.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:42.939Z,1513275222.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:43.235Z,1513275223.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:43.635Z,1513275223.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:44.035Z,1513275224.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:44.439Z,1513275224.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:44.838Z,1513275224.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:45.237Z,1513275225.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:45.637Z,1513275225.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:46.078Z,1513275226.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:46.440Z,1513275226.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:46.836Z,1513275226.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:47.235Z,1513275227.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:47.633Z,1513275227.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:48.068Z,1513275228.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:48.443Z,1513275228.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:48.847Z,1513275228.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:49.271Z,1513275229.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:49.631Z,1513275229.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:50.041Z,1513275230.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:50.439Z,1513275230.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:50.843Z,1513275230.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:50.847Z,1513275230.847 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T18:08:50.6Z
2017-12-14T18:13:50.847Z,1513275230.847 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:13:50.847Z,1513275230.847 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:13:51.251Z,1513275231.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:55.234Z,1513275235.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:55.354Z,1513275235.354 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0408.lzma
2017-12-14T18:13:55.417Z,1513275235.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:55.719Z,1513275235.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:56.601Z,1513275236.601 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0408.lzma.bak
2017-12-14T18:13:56.601Z,1513275236.601 [DataOverHttps](INFO): SBD MOMSN=5439330
2017-12-14T18:13:56.708Z,1513275236.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:57.571Z,1513275237.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:13:57.748Z,1513275237.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:01.106Z,1513275241.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:01.260Z,1513275241.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:01.607Z,1513275241.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:02.086Z,1513275242.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:02.397Z,1513275242.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:02.474Z,1513275242.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:02.800Z,1513275242.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:03.269Z,1513275243.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:04.068Z,1513275244.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:04.721Z,1513275244.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:05.517Z,1513275245.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:06.294Z,1513275246.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:06.317Z,1513275246.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:06.369Z,1513275246.369 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0409.lzma
2017-12-14T18:14:06.434Z,1513275246.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:06.733Z,1513275246.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:06.815Z,1513275246.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:07.156Z,1513275247.156 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0409.lzma.bak
2017-12-14T18:14:07.156Z,1513275247.156 [DataOverHttps](INFO): SBD MOMSN=5439332
2017-12-14T18:14:07.231Z,1513275247.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:08.455Z,1513275248.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:08.459Z,1513275248.459 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:14:08.459Z,1513275248.459 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:14:08.459Z,1513275248.459 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:14:08.606Z,1513275248.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:12.010Z,1513275252.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:12.154Z,1513275252.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:12.484Z,1513275252.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:12.891Z,1513275252.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:13.288Z,1513275253.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:13.695Z,1513275253.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:14.100Z,1513275254.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:14.499Z,1513275254.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:14.893Z,1513275254.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:15.289Z,1513275255.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:15.726Z,1513275255.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:16.097Z,1513275256.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:16.492Z,1513275256.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:16.920Z,1513275256.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:17.299Z,1513275257.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:17.697Z,1513275257.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:18.146Z,1513275258.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:18.499Z,1513275258.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:18.912Z,1513275258.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:19.314Z,1513275259.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:19.695Z,1513275259.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:20.139Z,1513275260.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:20.506Z,1513275260.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:20.907Z,1513275260.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:21.296Z,1513275261.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:21.691Z,1513275261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:22.119Z,1513275262.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:22.502Z,1513275262.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:22.900Z,1513275262.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:23.300Z,1513275263.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:23.707Z,1513275263.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:24.087Z,1513275264.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:24.487Z,1513275264.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:24.893Z,1513275264.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:25.306Z,1513275265.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:25.696Z,1513275265.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:26.111Z,1513275266.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:26.503Z,1513275266.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:26.901Z,1513275266.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:27.299Z,1513275267.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:27.691Z,1513275267.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:28.093Z,1513275268.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:28.547Z,1513275268.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:28.898Z,1513275268.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:29.308Z,1513275269.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:29.707Z,1513275269.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:30.091Z,1513275270.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:30.497Z,1513275270.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:30.893Z,1513275270.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:31.394Z,1513275271.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:31.751Z,1513275271.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:32.111Z,1513275272.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:32.507Z,1513275272.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:32.908Z,1513275272.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:33.299Z,1513275273.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:33.687Z,1513275273.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:34.101Z,1513275274.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:34.493Z,1513275274.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:34.951Z,1513275274.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:35.307Z,1513275275.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:35.696Z,1513275275.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:36.087Z,1513275276.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:36.483Z,1513275276.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:36.881Z,1513275276.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:37.283Z,1513275277.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:37.680Z,1513275277.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:38.138Z,1513275278.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:38.492Z,1513275278.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:38.888Z,1513275278.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:39.303Z,1513275279.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:39.676Z,1513275279.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:40.081Z,1513275280.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:40.532Z,1513275280.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:40.892Z,1513275280.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:41.394Z,1513275281.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:41.696Z,1513275281.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:42.115Z,1513275282.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:42.478Z,1513275282.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:42.878Z,1513275282.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:43.283Z,1513275283.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:43.679Z,1513275283.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:44.092Z,1513275284.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:44.519Z,1513275284.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:44.947Z,1513275284.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:45.279Z,1513275285.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:45.684Z,1513275285.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:46.083Z,1513275286.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:46.083Z,1513275286.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 353
2017-12-14T18:14:46.083Z,1513275286.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:14:46.085Z,1513275286.085 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:46.085Z,1513275286.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 353
2017-12-14T18:14:46.085Z,1513275286.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:14:46.087Z,1513275286.087 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:46.087Z,1513275286.087 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 353
2017-12-14T18:14:46.087Z,1513275286.087 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:14:46.099Z,1513275286.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:14:46.099Z,1513275286.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:14:46.100Z,1513275286.100 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:14:46.491Z,1513275286.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:14:46.492Z,1513275286.492 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 353
2017-12-14T18:14:46.492Z,1513275286.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:14:46.492Z,1513275286.492 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 353
2017-12-14T18:14:46.493Z,1513275286.493 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:14:46.493Z,1513275286.493 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 353
2017-12-14T18:14:46.891Z,1513275286.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:14:46.892Z,1513275286.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:14:46.892Z,1513275286.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:14:46.892Z,1513275286.892 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:14:46.893Z,1513275286.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:14:46.893Z,1513275286.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:14:46.894Z,1513275286.894 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:14:46.894Z,1513275286.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:14:46.894Z,1513275286.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:14:46.998Z,1513275286.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:47.292Z,1513275287.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:47.728Z,1513275287.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:47.793Z,1513275287.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:14:48.083Z,1513275288.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:48.483Z,1513275288.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:48.881Z,1513275288.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:49.281Z,1513275289.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:49.687Z,1513275289.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:50.093Z,1513275290.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:50.527Z,1513275290.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:50.896Z,1513275290.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:51.337Z,1513275291.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:51.715Z,1513275291.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:52.091Z,1513275292.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:52.510Z,1513275292.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:52.892Z,1513275292.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:53.299Z,1513275293.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:53.692Z,1513275293.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:54.080Z,1513275294.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:54.481Z,1513275294.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:54.879Z,1513275294.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:55.338Z,1513275295.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:55.683Z,1513275295.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:56.092Z,1513275296.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:56.499Z,1513275296.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:56.895Z,1513275296.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:57.322Z,1513275297.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:57.711Z,1513275297.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:58.080Z,1513275298.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:58.506Z,1513275298.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:58.899Z,1513275298.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:59.302Z,1513275299.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:14:59.706Z,1513275299.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:00.091Z,1513275300.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:00.509Z,1513275300.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:00.902Z,1513275300.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:01.319Z,1513275301.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:01.514Z,1513275301.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:01.698Z,1513275301.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:02.119Z,1513275302.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:02.310Z,1513275302.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:02.547Z,1513275302.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:02.714Z,1513275302.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:02.902Z,1513275302.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:03.277Z,1513275303.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:03.723Z,1513275303.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:04.100Z,1513275304.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:04.516Z,1513275304.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:04.907Z,1513275304.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:05.316Z,1513275305.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:05.701Z,1513275305.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:06.102Z,1513275306.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:06.502Z,1513275306.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:06.878Z,1513275306.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:07.305Z,1513275307.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:07.682Z,1513275307.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:08.103Z,1513275308.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:08.503Z,1513275308.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:09.024Z,1513275309.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:12.275Z,1513275312.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:12.412Z,1513275312.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:12.820Z,1513275312.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:13.190Z,1513275313.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:13.608Z,1513275313.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:14.114Z,1513275314.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:14.393Z,1513275314.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:14.784Z,1513275314.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:15.207Z,1513275315.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:15.501Z,1513275315.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:15.596Z,1513275315.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:16.014Z,1513275316.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:16.300Z,1513275316.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:16.377Z,1513275316.377 [PNI_TCM](ERROR): CRC does not match. Expected:0x51465 got:0x15415
2017-12-14T18:15:16.410Z,1513275316.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:16.705Z,1513275316.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:16.809Z,1513275316.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:17.189Z,1513275317.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:17.588Z,1513275317.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:18.020Z,1513275318.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:18.423Z,1513275318.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:18.791Z,1513275318.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:19.226Z,1513275319.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:19.594Z,1513275319.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:20.016Z,1513275320.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:20.403Z,1513275320.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:20.790Z,1513275320.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:21.194Z,1513275321.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:21.596Z,1513275321.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:22.015Z,1513275322.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:22.431Z,1513275322.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:22.810Z,1513275322.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:23.205Z,1513275323.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:23.590Z,1513275323.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:24.015Z,1513275324.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:24.383Z,1513275324.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:24.794Z,1513275324.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:25.224Z,1513275325.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:25.621Z,1513275325.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:26.063Z,1513275326.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:26.378Z,1513275326.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:26.823Z,1513275326.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:27.196Z,1513275327.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:27.580Z,1513275327.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:27.987Z,1513275327.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:28.389Z,1513275328.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:28.797Z,1513275328.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:29.193Z,1513275329.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:29.498Z,1513275329.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:29.610Z,1513275329.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:29.968Z,1513275329.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:30.296Z,1513275330.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:30.384Z,1513275330.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:30.706Z,1513275330.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:30.812Z,1513275330.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:31.207Z,1513275331.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:31.502Z,1513275331.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:31.592Z,1513275331.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:32.047Z,1513275332.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:32.298Z,1513275332.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:32.390Z,1513275332.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:32.701Z,1513275332.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:15:32.807Z,1513275332.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:33.195Z,1513275333.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:33.607Z,1513275333.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:34.016Z,1513275334.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:34.397Z,1513275334.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:34.772Z,1513275334.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:35.251Z,1513275335.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:35.577Z,1513275335.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:36.028Z,1513275336.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:36.399Z,1513275336.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:36.796Z,1513275336.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:37.183Z,1513275337.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:37.604Z,1513275337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:38.038Z,1513275338.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:38.408Z,1513275338.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:38.778Z,1513275338.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x6002 got:0x14324
2017-12-14T18:15:38.818Z,1513275338.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:39.206Z,1513275339.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:39.591Z,1513275339.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:40.033Z,1513275340.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:40.380Z,1513275340.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:40.804Z,1513275340.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:41.172Z,1513275341.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:41.615Z,1513275341.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:41.976Z,1513275341.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:42.403Z,1513275342.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:42.787Z,1513275342.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:43.187Z,1513275343.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:43.584Z,1513275343.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:44.009Z,1513275344.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:44.398Z,1513275344.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:44.816Z,1513275344.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:45.197Z,1513275345.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:45.614Z,1513275345.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:46.023Z,1513275346.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:46.387Z,1513275346.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:46.799Z,1513275346.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:47.231Z,1513275347.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:47.638Z,1513275347.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:48.086Z,1513275348.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:48.394Z,1513275348.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:48.827Z,1513275348.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:49.194Z,1513275349.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:49.622Z,1513275349.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:49.999Z,1513275349.999 [PNI_TCM](ERROR): CRC does not match. Expected:0x54510 got:0x23011
2017-12-14T18:15:50.032Z,1513275350.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:50.384Z,1513275350.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:50.788Z,1513275350.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:51.230Z,1513275351.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:51.590Z,1513275351.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:52.032Z,1513275352.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:52.389Z,1513275352.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:52.796Z,1513275352.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:53.195Z,1513275353.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:53.600Z,1513275353.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:54.064Z,1513275354.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:54.423Z,1513275354.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:54.784Z,1513275354.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:55.209Z,1513275355.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:55.589Z,1513275355.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:55.978Z,1513275355.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:56.387Z,1513275356.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:56.814Z,1513275356.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:57.193Z,1513275357.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:57.668Z,1513275357.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:57.982Z,1513275357.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:58.379Z,1513275358.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:58.778Z,1513275358.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:59.180Z,1513275359.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:15:59.582Z,1513275359.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:00.027Z,1513275360.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:00.393Z,1513275360.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:00.817Z,1513275360.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:01.176Z,1513275361.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:01.597Z,1513275361.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:02.014Z,1513275362.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:02.380Z,1513275362.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:02.792Z,1513275362.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:03.210Z,1513275363.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:03.590Z,1513275363.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:04.090Z,1513275364.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:04.385Z,1513275364.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:04.811Z,1513275364.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:05.183Z,1513275365.183 [PNI_TCM](ERROR): CRC does not match. Expected:0x64737 got:0x58704
2017-12-14T18:16:05.211Z,1513275365.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:05.580Z,1513275365.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x45340 got:0x49060
2017-12-14T18:16:05.600Z,1513275365.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:06.024Z,1513275366.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:06.399Z,1513275366.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:06.783Z,1513275366.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:07.235Z,1513275367.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:07.592Z,1513275367.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:08.040Z,1513275368.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:08.394Z,1513275368.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:08.794Z,1513275368.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:09.226Z,1513275369.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:12.727Z,1513275372.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:12.863Z,1513275372.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:13.266Z,1513275373.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:13.690Z,1513275373.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:14.063Z,1513275374.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:14.439Z,1513275374.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:14.836Z,1513275374.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:15.236Z,1513275375.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:15.639Z,1513275375.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:16.031Z,1513275376.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:16.432Z,1513275376.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:16.839Z,1513275376.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:17.263Z,1513275377.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:17.645Z,1513275377.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:18.092Z,1513275378.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:18.478Z,1513275378.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:18.855Z,1513275378.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:19.288Z,1513275379.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:19.678Z,1513275379.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:20.116Z,1513275380.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:20.440Z,1513275380.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:20.860Z,1513275380.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:21.268Z,1513275381.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:21.668Z,1513275381.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:22.112Z,1513275382.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:22.475Z,1513275382.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:22.868Z,1513275382.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:23.263Z,1513275383.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:23.640Z,1513275383.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:24.068Z,1513275384.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:24.456Z,1513275384.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:24.869Z,1513275384.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:25.231Z,1513275385.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:25.654Z,1513275385.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:26.030Z,1513275386.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:26.452Z,1513275386.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:26.839Z,1513275386.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:27.264Z,1513275387.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:27.632Z,1513275387.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:28.047Z,1513275388.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:28.454Z,1513275388.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:28.832Z,1513275388.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:29.315Z,1513275389.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:29.676Z,1513275389.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:30.095Z,1513275390.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:30.450Z,1513275390.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:30.867Z,1513275390.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:31.272Z,1513275391.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:31.654Z,1513275391.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:32.100Z,1513275392.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:32.460Z,1513275392.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:32.869Z,1513275392.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:33.267Z,1513275393.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:33.668Z,1513275393.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:34.068Z,1513275394.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:34.481Z,1513275394.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:34.847Z,1513275394.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:35.254Z,1513275395.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:35.643Z,1513275395.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:36.107Z,1513275396.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:36.456Z,1513275396.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:36.840Z,1513275396.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:37.225Z,1513275397.225 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:16:37.225Z,1513275397.225 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:16:37.225Z,1513275397.225 [BPC1](ERROR): Communications Fault
2017-12-14T18:16:37.273Z,1513275397.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:37.310Z,1513275397.310 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:16:37.643Z,1513275397.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:38.035Z,1513275398.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:38.436Z,1513275398.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:38.490Z,1513275398.490 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:16:38.490Z,1513275398.490 [BPC1] No Fault, FailCount= 1
2017-12-14T18:16:38.920Z,1513275398.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:39.263Z,1513275399.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:39.679Z,1513275399.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:40.086Z,1513275400.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:40.446Z,1513275400.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:40.843Z,1513275400.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:41.250Z,1513275401.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:41.648Z,1513275401.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:42.097Z,1513275402.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:42.452Z,1513275402.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:42.859Z,1513275402.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:43.272Z,1513275403.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:43.663Z,1513275403.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:44.059Z,1513275404.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:44.444Z,1513275404.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:44.890Z,1513275404.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:45.294Z,1513275405.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:45.670Z,1513275405.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:46.072Z,1513275406.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:46.448Z,1513275406.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:46.848Z,1513275406.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:47.287Z,1513275407.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:47.640Z,1513275407.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:48.087Z,1513275408.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:48.463Z,1513275408.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:48.865Z,1513275408.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:49.231Z,1513275409.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:49.643Z,1513275409.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:50.070Z,1513275410.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:50.422Z,1513275410.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:50.846Z,1513275410.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:51.249Z,1513275411.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:51.654Z,1513275411.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:52.025Z,1513275412.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:52.426Z,1513275412.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:52.851Z,1513275412.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:53.223Z,1513275413.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:53.635Z,1513275413.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:54.035Z,1513275414.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:54.443Z,1513275414.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:54.838Z,1513275414.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:55.235Z,1513275415.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:55.686Z,1513275415.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:56.034Z,1513275416.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:56.435Z,1513275416.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:56.871Z,1513275416.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:57.243Z,1513275417.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:57.692Z,1513275417.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:58.035Z,1513275418.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:58.436Z,1513275418.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:58.844Z,1513275418.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:59.259Z,1513275419.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:16:59.633Z,1513275419.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:00.060Z,1513275420.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:00.451Z,1513275420.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:00.845Z,1513275420.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:01.247Z,1513275421.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:01.632Z,1513275421.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:02.080Z,1513275422.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:02.443Z,1513275422.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:02.851Z,1513275422.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:03.241Z,1513275423.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:03.639Z,1513275423.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:04.080Z,1513275424.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:04.436Z,1513275424.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:04.839Z,1513275424.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:05.282Z,1513275425.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:05.637Z,1513275425.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:06.039Z,1513275426.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:06.447Z,1513275426.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:06.846Z,1513275426.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:07.237Z,1513275427.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:07.642Z,1513275427.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:08.038Z,1513275428.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:08.537Z,1513275428.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:08.847Z,1513275428.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:09.246Z,1513275429.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:12.789Z,1513275432.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:12.901Z,1513275432.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:13.263Z,1513275433.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:13.654Z,1513275433.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:14.063Z,1513275434.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:14.467Z,1513275434.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:14.895Z,1513275434.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:15.264Z,1513275435.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:15.663Z,1513275435.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:16.063Z,1513275436.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:16.460Z,1513275436.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:16.869Z,1513275436.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:17.264Z,1513275437.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:17.671Z,1513275437.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:18.139Z,1513275438.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:18.474Z,1513275438.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:18.872Z,1513275438.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:19.275Z,1513275439.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:19.668Z,1513275439.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:20.066Z,1513275440.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:20.496Z,1513275440.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:20.879Z,1513275440.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:21.284Z,1513275441.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:21.691Z,1513275441.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:22.055Z,1513275442.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:22.491Z,1513275442.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:22.855Z,1513275442.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:23.255Z,1513275443.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:23.663Z,1513275443.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:24.067Z,1513275444.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:24.504Z,1513275444.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:24.861Z,1513275444.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:25.266Z,1513275445.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:25.661Z,1513275445.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:26.059Z,1513275446.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:26.460Z,1513275446.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:26.864Z,1513275446.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:27.264Z,1513275447.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:27.746Z,1513275447.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:28.067Z,1513275448.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:28.467Z,1513275448.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:28.863Z,1513275448.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:29.266Z,1513275449.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:29.671Z,1513275449.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:30.063Z,1513275450.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:30.466Z,1513275450.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:30.943Z,1513275450.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:31.263Z,1513275451.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:31.667Z,1513275451.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:32.067Z,1513275452.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:32.463Z,1513275452.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:32.872Z,1513275452.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:33.272Z,1513275453.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:33.679Z,1513275453.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:34.105Z,1513275454.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:34.459Z,1513275454.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:34.866Z,1513275454.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:35.266Z,1513275455.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:35.667Z,1513275455.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:36.072Z,1513275456.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:36.476Z,1513275456.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:36.870Z,1513275456.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:37.299Z,1513275457.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:37.667Z,1513275457.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:38.071Z,1513275458.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:38.471Z,1513275458.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:38.885Z,1513275458.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:39.273Z,1513275459.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:39.676Z,1513275459.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:40.070Z,1513275460.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:40.516Z,1513275460.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:40.871Z,1513275460.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:41.270Z,1513275461.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:41.683Z,1513275461.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:42.075Z,1513275462.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:42.479Z,1513275462.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:42.973Z,1513275462.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:43.270Z,1513275463.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:43.767Z,1513275463.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:44.072Z,1513275464.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:44.483Z,1513275464.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:44.879Z,1513275464.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:45.283Z,1513275465.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:45.671Z,1513275465.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:46.074Z,1513275466.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:46.470Z,1513275466.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:46.875Z,1513275466.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:47.252Z,1513275467.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:47.252Z,1513275467.252 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 354
2017-12-14T18:17:47.252Z,1513275467.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:17:47.281Z,1513275467.281 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:47.281Z,1513275467.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 354
2017-12-14T18:17:47.281Z,1513275467.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:17:47.288Z,1513275467.288 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:47.289Z,1513275467.289 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 354
2017-12-14T18:17:47.289Z,1513275467.289 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:17:47.316Z,1513275467.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:17:47.317Z,1513275467.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:17:47.317Z,1513275467.317 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:17:47.682Z,1513275467.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:17:47.682Z,1513275467.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 354
2017-12-14T18:17:47.683Z,1513275467.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:17:47.683Z,1513275467.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 354
2017-12-14T18:17:47.683Z,1513275467.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:17:47.683Z,1513275467.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 354
2017-12-14T18:17:48.068Z,1513275468.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:17:48.069Z,1513275468.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:17:48.069Z,1513275468.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:17:48.070Z,1513275468.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:17:48.070Z,1513275468.070 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:17:48.070Z,1513275468.070 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:17:48.071Z,1513275468.071 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:17:48.071Z,1513275468.071 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:17:48.071Z,1513275468.071 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:17:48.478Z,1513275468.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:48.868Z,1513275468.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:49.267Z,1513275469.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:49.663Z,1513275469.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:50.108Z,1513275470.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:50.475Z,1513275470.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:50.876Z,1513275470.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:51.283Z,1513275471.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:51.679Z,1513275471.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:52.071Z,1513275472.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:52.462Z,1513275472.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:52.901Z,1513275472.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:53.366Z,1513275473.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:53.661Z,1513275473.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:54.085Z,1513275474.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:54.483Z,1513275474.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:54.872Z,1513275474.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:55.258Z,1513275475.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:55.661Z,1513275475.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:56.061Z,1513275476.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:56.488Z,1513275476.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:56.873Z,1513275476.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:57.273Z,1513275477.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:57.667Z,1513275477.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:58.061Z,1513275478.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:58.465Z,1513275478.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:58.871Z,1513275478.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:59.260Z,1513275479.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:17:59.717Z,1513275479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:00.109Z,1513275480.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:00.491Z,1513275480.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:00.874Z,1513275480.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:01.265Z,1513275481.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:01.667Z,1513275481.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:02.071Z,1513275482.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:02.466Z,1513275482.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:02.875Z,1513275482.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:03.274Z,1513275483.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:03.715Z,1513275483.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:04.064Z,1513275484.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:04.465Z,1513275484.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:04.891Z,1513275484.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:05.274Z,1513275485.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:05.683Z,1513275485.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:06.100Z,1513275486.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:06.515Z,1513275486.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:06.876Z,1513275486.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:07.263Z,1513275487.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:07.651Z,1513275487.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:08.083Z,1513275488.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:08.472Z,1513275488.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:08.876Z,1513275488.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:09.293Z,1513275489.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:12.929Z,1513275492.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:13.079Z,1513275493.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:13.398Z,1513275493.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:13.800Z,1513275493.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:14.207Z,1513275494.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:14.639Z,1513275494.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:15.004Z,1513275495.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:15.431Z,1513275495.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:15.808Z,1513275495.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:16.207Z,1513275496.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:16.606Z,1513275496.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:17.002Z,1513275497.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:17.403Z,1513275497.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:17.815Z,1513275497.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:18.212Z,1513275498.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:18.620Z,1513275498.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:19.012Z,1513275499.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:19.419Z,1513275499.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:19.813Z,1513275499.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:20.210Z,1513275500.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:20.612Z,1513275500.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:21.020Z,1513275501.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:21.417Z,1513275501.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:21.819Z,1513275501.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:22.250Z,1513275502.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:22.612Z,1513275502.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:23.015Z,1513275503.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:23.420Z,1513275503.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:23.823Z,1513275503.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:24.233Z,1513275504.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:24.605Z,1513275504.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:25.043Z,1513275505.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:25.441Z,1513275505.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:25.803Z,1513275505.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:26.207Z,1513275506.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:26.644Z,1513275506.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:27.013Z,1513275507.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:27.411Z,1513275507.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:27.867Z,1513275507.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:28.207Z,1513275508.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:28.664Z,1513275508.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:29.001Z,1513275509.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:29.400Z,1513275509.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:29.812Z,1513275509.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:30.267Z,1513275510.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:30.621Z,1513275510.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:31.010Z,1513275511.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:31.410Z,1513275511.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:31.871Z,1513275511.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:32.208Z,1513275512.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:32.600Z,1513275512.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:33.008Z,1513275513.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:33.426Z,1513275513.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:33.827Z,1513275513.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:34.203Z,1513275514.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:34.599Z,1513275514.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:35.060Z,1513275515.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:35.404Z,1513275515.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:35.820Z,1513275515.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:36.211Z,1513275516.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:36.619Z,1513275516.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:37.038Z,1513275517.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:37.409Z,1513275517.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:37.799Z,1513275517.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:38.253Z,1513275518.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:38.614Z,1513275518.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:39.023Z,1513275519.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:39.415Z,1513275519.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:39.813Z,1513275519.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:40.201Z,1513275520.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:40.606Z,1513275520.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:41.007Z,1513275521.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:41.426Z,1513275521.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:41.812Z,1513275521.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:42.219Z,1513275522.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:42.614Z,1513275522.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:43.013Z,1513275523.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:43.414Z,1513275523.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:43.790Z,1513275523.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:44.216Z,1513275524.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:44.639Z,1513275524.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:45.039Z,1513275525.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:45.416Z,1513275525.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:45.819Z,1513275525.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:46.205Z,1513275526.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:46.592Z,1513275526.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:46.992Z,1513275526.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:47.425Z,1513275527.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:47.805Z,1513275527.805 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T18:18:47.805Z,1513275527.805 [NAL9602] Data Fault, FailCount= 2
2017-12-14T18:18:47.805Z,1513275527.805 [NAL9602](ERROR): Data Fault
2017-12-14T18:18:47.946Z,1513275527.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:47.998Z,1513275527.998 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T18:18:48.174Z,1513275528.174 [NAL9602](INFO): Powering down
2017-12-14T18:18:48.221Z,1513275528.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:48.606Z,1513275528.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:49.027Z,1513275529.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:49.064Z,1513275529.064 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T18:18:49.064Z,1513275529.064 [NAL9602] No Fault, FailCount= 2
2017-12-14T18:18:49.403Z,1513275529.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:49.823Z,1513275529.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:50.210Z,1513275530.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:50.627Z,1513275530.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:51.003Z,1513275531.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:51.403Z,1513275531.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:51.799Z,1513275531.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:52.205Z,1513275532.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:52.606Z,1513275532.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:52.000Z,1513275533.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:53.403Z,1513275533.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:53.802Z,1513275533.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:54.217Z,1513275534.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:54.610Z,1513275534.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:55.010Z,1513275535.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:55.400Z,1513275535.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:55.796Z,1513275535.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:56.198Z,1513275536.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:56.602Z,1513275536.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:56.999Z,1513275536.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:57.440Z,1513275537.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:57.831Z,1513275537.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:58.201Z,1513275538.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:58.609Z,1513275538.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:59.027Z,1513275539.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:59.414Z,1513275539.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:18:59.811Z,1513275539.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:00.215Z,1513275540.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:00.645Z,1513275540.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:01.003Z,1513275541.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:01.400Z,1513275541.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:01.827Z,1513275541.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:02.207Z,1513275542.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:02.607Z,1513275542.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:02.999Z,1513275542.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:03.398Z,1513275543.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:03.871Z,1513275543.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:04.207Z,1513275544.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:04.620Z,1513275544.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:04.994Z,1513275544.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:05.386Z,1513275545.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:05.797Z,1513275545.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:06.198Z,1513275546.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:06.601Z,1513275546.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:06.996Z,1513275546.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:07.398Z,1513275547.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:07.826Z,1513275547.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:08.198Z,1513275548.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:08.601Z,1513275548.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:08.999Z,1513275548.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:09.002Z,1513275549.002 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T18:19:09.003Z,1513275549.003 [Default:CheckIn:C.Wait] Stopped
2017-12-14T18:19:09.003Z,1513275549.003 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T18:19:09.003Z,1513275549.003 [Default:CheckIn:D] Running Loop=1
2017-12-14T18:19:09.396Z,1513275549.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:09.399Z,1513275549.399 [Default:CheckIn:D] Stopped
2017-12-14T18:19:09.399Z,1513275549.399 [Default:CheckIn:E] Running Loop=1
2017-12-14T18:19:12.944Z,1513275552.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:12.948Z,1513275552.948 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1065.900130 min 
2017-12-14T18:19:12.948Z,1513275552.948 [Default:CheckIn:E] Stopped
2017-12-14T18:19:12.948Z,1513275552.948 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T18:19:12.948Z,1513275552.948 [Default:CheckIn] Stopped
2017-12-14T18:19:12.948Z,1513275552.948 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T18:19:12.949Z,1513275552.949 [Default:CheckIn](INFO): Running loop #103
2017-12-14T18:19:12.949Z,1513275552.949 [Default:CheckIn] Running Loop=103
2017-12-14T18:19:12.949Z,1513275552.949 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T18:19:12.949Z,1513275552.949 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T18:19:13.055Z,1513275553.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:13.460Z,1513275553.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:13.867Z,1513275553.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:14.221Z,1513275554.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:14.661Z,1513275554.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:15.031Z,1513275555.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:15.433Z,1513275555.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:15.835Z,1513275555.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:16.235Z,1513275556.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:16.646Z,1513275556.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:17.035Z,1513275557.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:17.434Z,1513275557.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:17.835Z,1513275557.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:18.190Z,1513275558.190 [NAL9602](INFO): Powering up NAL9602
2017-12-14T18:19:18.246Z,1513275558.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:18.642Z,1513275558.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:19.040Z,1513275559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:19.441Z,1513275559.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:19.948Z,1513275559.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:20.233Z,1513275560.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:20.639Z,1513275560.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:21.033Z,1513275561.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:21.432Z,1513275561.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:21.840Z,1513275561.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:22.237Z,1513275562.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:22.627Z,1513275562.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:23.097Z,1513275563.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:23.435Z,1513275563.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:23.832Z,1513275563.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:24.237Z,1513275564.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:24.630Z,1513275564.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:25.030Z,1513275565.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:25.430Z,1513275565.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:25.831Z,1513275565.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:26.340Z,1513275566.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:26.635Z,1513275566.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:27.035Z,1513275567.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:27.434Z,1513275567.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:27.838Z,1513275567.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:28.307Z,1513275568.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:28.642Z,1513275568.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:28.994Z,1513275568.994 [NAL9602](INFO): NAL9602 initialized
2017-12-14T18:19:29.040Z,1513275569.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:29.444Z,1513275569.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:29.842Z,1513275569.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:29.855Z,1513275569.855 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:19:30.247Z,1513275570.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:30.652Z,1513275570.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:31.035Z,1513275571.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:31.438Z,1513275571.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:31.839Z,1513275571.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:32.247Z,1513275572.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:32.671Z,1513275572.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:33.036Z,1513275573.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:33.444Z,1513275573.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:33.839Z,1513275573.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:34.244Z,1513275574.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:34.639Z,1513275574.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:35.059Z,1513275575.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:35.460Z,1513275575.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:35.866Z,1513275575.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:36.236Z,1513275576.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:36.663Z,1513275576.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:37.031Z,1513275577.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:37.467Z,1513275577.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:37.839Z,1513275577.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:38.232Z,1513275578.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:38.639Z,1513275578.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:39.037Z,1513275579.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:39.438Z,1513275579.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:39.839Z,1513275579.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:40.312Z,1513275580.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:40.648Z,1513275580.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:41.041Z,1513275581.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:41.440Z,1513275581.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:41.848Z,1513275581.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:42.322Z,1513275582.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:42.651Z,1513275582.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:43.032Z,1513275583.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:43.431Z,1513275583.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:43.839Z,1513275583.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:44.239Z,1513275584.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:44.673Z,1513275584.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:45.043Z,1513275585.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:45.445Z,1513275585.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:45.955Z,1513275585.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:46.222Z,1513275586.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:46.654Z,1513275586.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:47.051Z,1513275587.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:47.456Z,1513275587.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:47.860Z,1513275587.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:48.250Z,1513275588.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:48.642Z,1513275588.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:49.039Z,1513275589.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:49.448Z,1513275589.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:49.852Z,1513275589.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:50.255Z,1513275590.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:50.663Z,1513275590.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:51.030Z,1513275591.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:51.431Z,1513275591.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:51.832Z,1513275591.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:52.305Z,1513275592.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:52.636Z,1513275592.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:53.059Z,1513275593.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:53.459Z,1513275593.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:53.831Z,1513275593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:54.304Z,1513275594.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:54.628Z,1513275594.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:55.033Z,1513275595.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:55.467Z,1513275595.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:55.843Z,1513275595.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:56.312Z,1513275596.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:56.636Z,1513275596.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:57.029Z,1513275597.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:57.439Z,1513275597.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:57.879Z,1513275597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:58.234Z,1513275598.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:58.707Z,1513275598.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:59.058Z,1513275599.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:59.459Z,1513275599.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:19:59.832Z,1513275599.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:00.234Z,1513275600.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:00.636Z,1513275600.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:01.043Z,1513275601.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:01.447Z,1513275601.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:01.965Z,1513275601.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:02.260Z,1513275602.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:02.644Z,1513275602.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:03.042Z,1513275603.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:03.424Z,1513275603.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:03.849Z,1513275603.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:04.234Z,1513275604.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:04.646Z,1513275604.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:05.055Z,1513275605.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:05.448Z,1513275605.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:05.839Z,1513275605.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:06.243Z,1513275606.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:06.633Z,1513275606.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:07.023Z,1513275607.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:07.447Z,1513275607.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:07.864Z,1513275607.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:08.389Z,1513275608.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:08.637Z,1513275608.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:09.032Z,1513275609.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:09.432Z,1513275609.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:12.967Z,1513275612.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:13.110Z,1513275613.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:13.444Z,1513275613.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:13.867Z,1513275613.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:14.265Z,1513275614.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:14.647Z,1513275614.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:15.047Z,1513275615.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:15.447Z,1513275615.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:15.848Z,1513275615.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:16.264Z,1513275616.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:16.663Z,1513275616.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:17.052Z,1513275617.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:17.449Z,1513275617.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:17.948Z,1513275617.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:18.252Z,1513275618.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:18.648Z,1513275618.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:19.048Z,1513275619.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:19.452Z,1513275619.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:19.921Z,1513275619.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:20.237Z,1513275620.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:20.687Z,1513275620.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:21.043Z,1513275621.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:21.471Z,1513275621.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:21.844Z,1513275621.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:22.312Z,1513275622.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:22.647Z,1513275622.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:23.046Z,1513275623.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:23.444Z,1513275623.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:23.859Z,1513275623.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:24.351Z,1513275624.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:24.676Z,1513275624.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:25.039Z,1513275625.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:25.442Z,1513275625.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:25.842Z,1513275625.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:26.251Z,1513275626.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:26.659Z,1513275626.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:27.063Z,1513275627.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:27.453Z,1513275627.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:27.867Z,1513275627.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:28.242Z,1513275628.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:28.643Z,1513275628.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:29.039Z,1513275629.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:29.462Z,1513275629.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:29.935Z,1513275629.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:30.243Z,1513275630.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:30.703Z,1513275630.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:31.043Z,1513275631.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:31.442Z,1513275631.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:31.875Z,1513275631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:32.247Z,1513275632.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:32.678Z,1513275632.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:33.043Z,1513275633.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:33.442Z,1513275633.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:33.885Z,1513275633.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:34.229Z,1513275634.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:34.655Z,1513275634.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:35.067Z,1513275635.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:35.464Z,1513275635.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:35.859Z,1513275635.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:36.325Z,1513275636.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:36.655Z,1513275636.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:37.040Z,1513275637.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:37.450Z,1513275637.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:37.853Z,1513275637.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:38.330Z,1513275638.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:38.649Z,1513275638.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:39.055Z,1513275639.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:39.451Z,1513275639.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:39.856Z,1513275639.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:40.267Z,1513275640.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:40.645Z,1513275640.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:41.036Z,1513275641.036 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T18:20:41.036Z,1513275641.036 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:20:41.036Z,1513275641.036 [BPC1](ERROR): Data Fault
2017-12-14T18:20:41.044Z,1513275641.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:41.066Z,1513275641.066 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:20:41.443Z,1513275641.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:41.841Z,1513275641.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:42.252Z,1513275642.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:42.266Z,1513275642.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:20:42.266Z,1513275642.266 [BPC1] No Fault, FailCount= 1
2017-12-14T18:20:42.703Z,1513275642.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:43.056Z,1513275643.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:43.495Z,1513275643.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:43.835Z,1513275643.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:44.268Z,1513275644.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:44.641Z,1513275644.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:45.042Z,1513275645.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:45.442Z,1513275645.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:45.844Z,1513275645.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:46.253Z,1513275646.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:46.682Z,1513275646.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:47.047Z,1513275647.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:47.446Z,1513275647.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:47.855Z,1513275647.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:48.245Z,1513275648.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:48.245Z,1513275648.245 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 355
2017-12-14T18:20:48.245Z,1513275648.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:20:48.247Z,1513275648.247 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:48.247Z,1513275648.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 355
2017-12-14T18:20:48.247Z,1513275648.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:20:48.249Z,1513275648.249 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:48.249Z,1513275648.249 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 355
2017-12-14T18:20:48.249Z,1513275648.249 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:20:48.261Z,1513275648.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:20:48.261Z,1513275648.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:20:48.262Z,1513275648.262 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:20:48.668Z,1513275648.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:20:48.668Z,1513275648.668 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 355
2017-12-14T18:20:48.668Z,1513275648.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:20:48.668Z,1513275648.668 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 355
2017-12-14T18:20:48.669Z,1513275648.669 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:20:48.669Z,1513275648.669 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 355
2017-12-14T18:20:49.062Z,1513275649.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:20:49.062Z,1513275649.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:20:49.063Z,1513275649.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:20:49.063Z,1513275649.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:20:49.063Z,1513275649.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:20:49.064Z,1513275649.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:20:49.064Z,1513275649.064 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:20:49.064Z,1513275649.064 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:20:49.065Z,1513275649.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:20:49.461Z,1513275649.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:49.880Z,1513275649.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:50.312Z,1513275650.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:50.647Z,1513275650.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:51.064Z,1513275651.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:51.451Z,1513275651.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:51.854Z,1513275651.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:52.316Z,1513275652.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:52.644Z,1513275652.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:53.078Z,1513275653.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:53.447Z,1513275653.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:53.843Z,1513275653.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:54.255Z,1513275654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:54.654Z,1513275654.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:55.055Z,1513275655.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:55.453Z,1513275655.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:55.844Z,1513275655.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:56.271Z,1513275656.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:56.658Z,1513275656.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:57.048Z,1513275657.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:57.456Z,1513275657.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:57.863Z,1513275657.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:58.261Z,1513275658.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:58.651Z,1513275658.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:59.055Z,1513275659.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:59.485Z,1513275659.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:20:59.859Z,1513275659.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:00.260Z,1513275660.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:00.659Z,1513275660.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:01.044Z,1513275661.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:01.452Z,1513275661.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:01.847Z,1513275661.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:02.244Z,1513275662.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:02.660Z,1513275662.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:03.121Z,1513275663.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:03.461Z,1513275663.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:03.893Z,1513275663.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:04.328Z,1513275664.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:04.670Z,1513275664.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:05.034Z,1513275665.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:05.438Z,1513275665.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:05.876Z,1513275665.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:06.329Z,1513275666.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:06.644Z,1513275666.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:07.049Z,1513275667.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:07.438Z,1513275667.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:07.843Z,1513275667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:08.250Z,1513275668.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:08.657Z,1513275668.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:09.091Z,1513275669.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:09.453Z,1513275669.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:13.149Z,1513275673.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:13.267Z,1513275673.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:13.655Z,1513275673.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:14.059Z,1513275674.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:14.456Z,1513275674.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:14.824Z,1513275674.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:15.240Z,1513275675.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:15.635Z,1513275675.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:16.067Z,1513275676.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:16.461Z,1513275676.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:16.888Z,1513275676.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:17.328Z,1513275677.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:17.731Z,1513275677.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:18.126Z,1513275678.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:18.479Z,1513275678.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:18.890Z,1513275678.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:19.248Z,1513275679.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:19.662Z,1513275679.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:20.091Z,1513275680.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:20.523Z,1513275680.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:20.848Z,1513275680.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:21.282Z,1513275681.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:21.639Z,1513275681.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:22.084Z,1513275682.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:22.480Z,1513275682.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:22.875Z,1513275682.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:23.282Z,1513275683.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:23.713Z,1513275683.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:24.080Z,1513275684.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:24.466Z,1513275684.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:24.843Z,1513275684.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:25.327Z,1513275685.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:25.709Z,1513275685.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:26.087Z,1513275686.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:26.553Z,1513275686.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:26.828Z,1513275686.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:27.283Z,1513275687.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:27.625Z,1513275687.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:28.062Z,1513275688.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:28.439Z,1513275688.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:28.844Z,1513275688.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:29.267Z,1513275689.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:29.643Z,1513275689.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:30.095Z,1513275690.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:30.439Z,1513275690.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:30.847Z,1513275690.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:31.270Z,1513275691.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:31.679Z,1513275691.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:32.079Z,1513275692.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:32.451Z,1513275692.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:32.843Z,1513275692.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:33.251Z,1513275693.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:33.668Z,1513275693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:34.106Z,1513275694.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:34.475Z,1513275694.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:34.891Z,1513275694.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:35.263Z,1513275695.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:35.717Z,1513275695.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:36.050Z,1513275696.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:36.448Z,1513275696.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:36.840Z,1513275696.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:37.271Z,1513275697.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:37.647Z,1513275697.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:38.050Z,1513275698.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:38.445Z,1513275698.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:38.883Z,1513275698.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:39.254Z,1513275699.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:39.655Z,1513275699.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:40.058Z,1513275700.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:40.451Z,1513275700.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:40.852Z,1513275700.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:41.268Z,1513275701.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:41.662Z,1513275701.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:42.073Z,1513275702.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:42.458Z,1513275702.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:42.840Z,1513275702.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:43.252Z,1513275703.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:43.671Z,1513275703.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:44.068Z,1513275704.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:44.463Z,1513275704.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:44.839Z,1513275704.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:45.252Z,1513275705.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:45.642Z,1513275705.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:46.052Z,1513275706.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:46.467Z,1513275706.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:46.856Z,1513275706.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:47.312Z,1513275707.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:47.707Z,1513275707.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:48.040Z,1513275708.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:48.479Z,1513275708.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:48.842Z,1513275708.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:49.287Z,1513275709.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:49.651Z,1513275709.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:50.056Z,1513275710.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:50.451Z,1513275710.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:50.851Z,1513275710.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:51.255Z,1513275711.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:51.642Z,1513275711.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:52.053Z,1513275712.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:52.428Z,1513275712.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:52.854Z,1513275712.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:53.258Z,1513275713.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:53.630Z,1513275713.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:54.031Z,1513275714.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:54.428Z,1513275714.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:54.832Z,1513275714.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:55.228Z,1513275715.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:55.663Z,1513275715.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:56.032Z,1513275716.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:56.439Z,1513275716.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:56.836Z,1513275716.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:57.231Z,1513275717.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:57.670Z,1513275717.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:58.130Z,1513275718.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:58.436Z,1513275718.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:58.851Z,1513275718.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:59.243Z,1513275719.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:21:59.636Z,1513275719.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:00.023Z,1513275720.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:00.427Z,1513275720.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:00.820Z,1513275720.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:01.220Z,1513275721.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:01.651Z,1513275721.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:02.028Z,1513275722.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:02.436Z,1513275722.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:02.823Z,1513275722.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:03.222Z,1513275723.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:03.623Z,1513275723.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:04.023Z,1513275724.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:04.435Z,1513275724.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:04.833Z,1513275724.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:05.235Z,1513275725.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:05.642Z,1513275725.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:06.023Z,1513275726.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:06.431Z,1513275726.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:06.825Z,1513275726.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:07.224Z,1513275727.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:07.636Z,1513275727.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:08.036Z,1513275728.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:08.436Z,1513275728.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:08.823Z,1513275728.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:09.219Z,1513275729.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:09.675Z,1513275729.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:13.122Z,1513275733.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:13.267Z,1513275733.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:13.607Z,1513275733.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:14.035Z,1513275734.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:14.423Z,1513275734.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:14.787Z,1513275734.787 [PNI_TCM](ERROR): CRC does not match. Expected:0x40464 got:0x1858
2017-12-14T18:22:14.816Z,1513275734.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:15.199Z,1513275735.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:15.603Z,1513275735.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:16.011Z,1513275736.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:16.386Z,1513275736.386 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-12-14T18:22:16.496Z,1513275736.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:16.807Z,1513275736.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:17.203Z,1513275737.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:17.605Z,1513275737.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:18.001Z,1513275738.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:18.394Z,1513275738.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:18.793Z,1513275738.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:19.219Z,1513275739.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:19.596Z,1513275739.596 [PNI_TCM](ERROR): CRC does not match. Expected:0x46737 got:0x16896
2017-12-14T18:22:19.623Z,1513275739.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:20.025Z,1513275740.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:20.400Z,1513275740.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:20.811Z,1513275740.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:21.186Z,1513275741.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T18:22:21.203Z,1513275741.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:21.592Z,1513275741.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:22.003Z,1513275742.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:22.434Z,1513275742.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:22.855Z,1513275742.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:23.231Z,1513275743.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:23.638Z,1513275743.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:24.011Z,1513275744.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:24.390Z,1513275744.390 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-12-14T18:22:24.419Z,1513275744.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:24.811Z,1513275744.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:25.207Z,1513275745.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:25.634Z,1513275745.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:26.029Z,1513275746.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x22303 got:0x16896
2017-12-14T18:22:26.055Z,1513275746.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:26.403Z,1513275746.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:26.796Z,1513275746.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:27.215Z,1513275747.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:27.627Z,1513275747.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:28.010Z,1513275748.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:28.423Z,1513275748.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:28.828Z,1513275748.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:29.204Z,1513275749.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:29.604Z,1513275749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:30.006Z,1513275750.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:30.402Z,1513275750.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:30.802Z,1513275750.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:31.207Z,1513275751.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:31.629Z,1513275751.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:32.012Z,1513275752.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:32.411Z,1513275752.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:32.833Z,1513275752.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:33.204Z,1513275753.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:33.632Z,1513275753.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:33.995Z,1513275753.995 [PNI_TCM](ERROR): CRC does not match. Expected:0x8483 got:0x192
2017-12-14T18:22:34.030Z,1513275754.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:34.435Z,1513275754.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:34.813Z,1513275754.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:35.251Z,1513275755.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:35.613Z,1513275755.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:36.073Z,1513275756.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:36.408Z,1513275756.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:36.810Z,1513275756.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:37.232Z,1513275757.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:37.613Z,1513275757.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:38.014Z,1513275758.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:38.418Z,1513275758.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:38.811Z,1513275758.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:39.248Z,1513275759.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:39.605Z,1513275759.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:40.050Z,1513275760.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:40.411Z,1513275760.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:40.812Z,1513275760.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:41.214Z,1513275761.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:41.623Z,1513275761.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:42.007Z,1513275762.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:42.440Z,1513275762.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:42.811Z,1513275762.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:43.219Z,1513275763.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:43.613Z,1513275763.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:44.023Z,1513275764.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:44.463Z,1513275764.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:44.810Z,1513275764.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:45.219Z,1513275765.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:45.670Z,1513275765.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:46.023Z,1513275766.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:46.424Z,1513275766.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:46.814Z,1513275766.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:47.214Z,1513275767.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:47.610Z,1513275767.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:48.023Z,1513275768.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:48.387Z,1513275768.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x51789 got:0x256
2017-12-14T18:22:48.420Z,1513275768.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:48.864Z,1513275768.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:49.211Z,1513275769.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:49.623Z,1513275769.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:50.022Z,1513275770.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:50.410Z,1513275770.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:50.803Z,1513275770.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:51.203Z,1513275771.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:51.607Z,1513275771.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:52.059Z,1513275772.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:52.405Z,1513275772.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:52.801Z,1513275772.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:53.215Z,1513275773.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:53.605Z,1513275773.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:54.085Z,1513275774.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:54.413Z,1513275774.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:54.839Z,1513275774.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:55.243Z,1513275775.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:55.659Z,1513275775.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:56.011Z,1513275776.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:56.439Z,1513275776.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:56.805Z,1513275776.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:57.227Z,1513275777.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:57.616Z,1513275777.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:58.051Z,1513275778.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:58.461Z,1513275778.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:58.801Z,1513275778.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:59.214Z,1513275779.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:22:59.603Z,1513275779.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:00.098Z,1513275780.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:00.404Z,1513275780.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:00.817Z,1513275780.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:01.212Z,1513275781.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:01.624Z,1513275781.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:02.012Z,1513275782.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:02.407Z,1513275782.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:02.804Z,1513275782.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:03.205Z,1513275783.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:03.615Z,1513275783.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:04.017Z,1513275784.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:04.420Z,1513275784.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:04.847Z,1513275784.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:05.207Z,1513275785.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:05.604Z,1513275785.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:06.027Z,1513275786.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:06.439Z,1513275786.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:06.811Z,1513275786.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:07.233Z,1513275787.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:07.627Z,1513275787.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:08.061Z,1513275788.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:08.406Z,1513275788.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:08.814Z,1513275788.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:09.205Z,1513275789.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:09.617Z,1513275789.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:10.011Z,1513275790.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:11.493Z,1513275791.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:12.290Z,1513275792.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:12.709Z,1513275792.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:13.470Z,1513275793.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:13.611Z,1513275793.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:14.017Z,1513275794.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:14.432Z,1513275794.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:14.792Z,1513275794.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:15.193Z,1513275795.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:15.611Z,1513275795.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:16.012Z,1513275796.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:16.387Z,1513275796.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:16.811Z,1513275796.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:17.216Z,1513275797.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:17.615Z,1513275797.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:18.014Z,1513275798.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:18.439Z,1513275798.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:18.800Z,1513275798.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:19.195Z,1513275799.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:19.639Z,1513275799.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:20.012Z,1513275800.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:20.420Z,1513275800.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:20.829Z,1513275800.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:21.180Z,1513275801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:21.603Z,1513275801.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:22.034Z,1513275802.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x45103 got:0x17295
2017-12-14T18:23:22.064Z,1513275802.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:22.395Z,1513275802.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:22.791Z,1513275802.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:23.195Z,1513275803.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:23.590Z,1513275803.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:24.014Z,1513275804.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:24.383Z,1513275804.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:24.820Z,1513275804.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:25.193Z,1513275805.193 [PNI_TCM](ERROR): CRC does not match. Expected:0x36967 got:0x12624
2017-12-14T18:23:25.225Z,1513275805.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:25.595Z,1513275805.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:25.991Z,1513275805.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:26.408Z,1513275806.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:26.804Z,1513275806.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:27.240Z,1513275807.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:27.593Z,1513275807.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:28.013Z,1513275808.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:28.408Z,1513275808.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:28.816Z,1513275808.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:29.165Z,1513275809.165 [PNI_TCM](ERROR): CRC does not match. Expected:0x6283 got:0x256
2017-12-14T18:23:29.199Z,1513275809.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:29.603Z,1513275809.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:30.011Z,1513275810.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:30.441Z,1513275810.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:30.803Z,1513275810.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:31.207Z,1513275811.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:31.599Z,1513275811.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:32.010Z,1513275812.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:32.391Z,1513275812.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:32.843Z,1513275812.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:33.194Z,1513275813.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:33.660Z,1513275813.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:34.019Z,1513275814.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:34.419Z,1513275814.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:34.809Z,1513275814.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:35.184Z,1513275815.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:35.584Z,1513275815.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:36.048Z,1513275816.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:36.395Z,1513275816.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:36.843Z,1513275816.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:37.199Z,1513275817.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:37.604Z,1513275817.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:37.992Z,1513275817.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:38.393Z,1513275818.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:38.790Z,1513275818.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:39.210Z,1513275819.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:39.490Z,1513275819.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:39.619Z,1513275819.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:40.021Z,1513275820.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:40.287Z,1513275820.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:40.416Z,1513275820.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:40.697Z,1513275820.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:40.824Z,1513275820.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:41.204Z,1513275821.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:41.592Z,1513275821.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:42.054Z,1513275822.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:42.410Z,1513275822.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:42.824Z,1513275822.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:43.234Z,1513275823.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:43.584Z,1513275823.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:44.014Z,1513275824.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:44.387Z,1513275824.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:44.787Z,1513275824.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:45.192Z,1513275825.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:45.596Z,1513275825.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:46.016Z,1513275826.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:46.422Z,1513275826.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:46.783Z,1513275826.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:47.192Z,1513275827.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:47.587Z,1513275827.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:48.026Z,1513275828.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:48.373Z,1513275828.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:48.828Z,1513275828.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:49.204Z,1513275829.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:49.204Z,1513275829.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 356
2017-12-14T18:23:49.204Z,1513275829.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:23:49.214Z,1513275829.214 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:49.214Z,1513275829.214 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 356
2017-12-14T18:23:49.214Z,1513275829.214 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:23:49.219Z,1513275829.219 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:49.219Z,1513275829.219 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 356
2017-12-14T18:23:49.219Z,1513275829.219 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:23:49.244Z,1513275829.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:23:49.244Z,1513275829.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:23:49.245Z,1513275829.245 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:23:49.662Z,1513275829.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:23:49.662Z,1513275829.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 356
2017-12-14T18:23:49.663Z,1513275829.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:23:49.663Z,1513275829.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 356
2017-12-14T18:23:49.663Z,1513275829.663 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:23:49.663Z,1513275829.663 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 356
2017-12-14T18:23:50.015Z,1513275830.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:23:50.016Z,1513275830.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:23:50.016Z,1513275830.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:23:50.016Z,1513275830.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:23:50.017Z,1513275830.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:23:50.017Z,1513275830.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:23:50.029Z,1513275830.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:23:50.029Z,1513275830.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:23:50.030Z,1513275830.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:23:50.405Z,1513275830.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:50.800Z,1513275830.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:51.219Z,1513275831.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:51.603Z,1513275831.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:52.006Z,1513275832.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:52.406Z,1513275832.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:52.851Z,1513275832.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:53.178Z,1513275833.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:53.490Z,1513275833.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:53.594Z,1513275833.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:53.980Z,1513275833.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:54.287Z,1513275834.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:54.396Z,1513275834.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:54.697Z,1513275834.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:54.807Z,1513275834.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:55.205Z,1513275835.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:55.493Z,1513275835.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:55.596Z,1513275835.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:56.103Z,1513275836.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:56.291Z,1513275836.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:56.388Z,1513275836.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:56.697Z,1513275836.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:23:56.801Z,1513275836.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:57.187Z,1513275837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:57.592Z,1513275837.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:58.020Z,1513275838.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:58.398Z,1513275838.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:58.789Z,1513275838.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:59.219Z,1513275839.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:23:59.603Z,1513275839.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:00.012Z,1513275840.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:00.408Z,1513275840.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:00.781Z,1513275840.781 [PNI_TCM](ERROR): CRC does not match. Expected:0x42618 got:0x7490
2017-12-14T18:24:00.818Z,1513275840.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:01.192Z,1513275841.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:01.607Z,1513275841.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:02.027Z,1513275842.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:02.417Z,1513275842.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:02.785Z,1513275842.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:03.216Z,1513275843.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:03.592Z,1513275843.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:04.060Z,1513275844.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:04.409Z,1513275844.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:04.815Z,1513275844.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:05.180Z,1513275845.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:05.600Z,1513275845.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:05.981Z,1513275845.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:06.407Z,1513275846.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:06.801Z,1513275846.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:07.201Z,1513275847.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:07.582Z,1513275847.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:08.000Z,1513275848.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:08.398Z,1513275848.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:08.823Z,1513275848.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:09.199Z,1513275849.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:09.611Z,1513275849.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:09.986Z,1513275849.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x60381 got:0x34072
2017-12-14T18:24:10.061Z,1513275850.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:10.391Z,1513275850.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:13.812Z,1513275853.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:13.815Z,1513275853.815 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T18:19:12.9Z
2017-12-14T18:24:13.815Z,1513275853.815 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:24:13.815Z,1513275853.815 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:24:14.027Z,1513275854.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:14.756Z,1513275854.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:14.895Z,1513275854.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:15.288Z,1513275855.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:15.663Z,1513275855.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:19.119Z,1513275859.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:19.197Z,1513275859.197 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0412.lzma
2017-12-14T18:24:19.263Z,1513275859.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:19.647Z,1513275859.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:19.986Z,1513275859.986 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0412.lzma.bak
2017-12-14T18:24:19.986Z,1513275859.986 [DataOverHttps](INFO): SBD MOMSN=5439343
2017-12-14T18:24:20.053Z,1513275860.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:21.255Z,1513275861.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:21.400Z,1513275861.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:24.824Z,1513275864.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:24.963Z,1513275864.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:25.374Z,1513275865.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:25.796Z,1513275865.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:26.190Z,1513275866.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:26.543Z,1513275866.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:30.095Z,1513275870.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:30.171Z,1513275870.171 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0413.lzma
2017-12-14T18:24:30.234Z,1513275870.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:30.625Z,1513275870.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:30.924Z,1513275870.924 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0413.lzma.bak
2017-12-14T18:24:30.924Z,1513275870.924 [DataOverHttps](INFO): SBD MOMSN=5439345
2017-12-14T18:24:30.999Z,1513275870.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:32.196Z,1513275872.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:32.199Z,1513275872.199 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:24:32.199Z,1513275872.199 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:24:32.199Z,1513275872.199 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:24:32.339Z,1513275872.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:35.685Z,1513275875.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:35.831Z,1513275875.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:36.180Z,1513275876.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:36.575Z,1513275876.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:36.973Z,1513275876.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:37.368Z,1513275877.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:37.795Z,1513275877.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:38.151Z,1513275878.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:38.568Z,1513275878.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:39.004Z,1513275879.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:39.361Z,1513275879.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:39.758Z,1513275879.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:40.171Z,1513275880.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:40.562Z,1513275880.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:40.959Z,1513275880.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:41.359Z,1513275881.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:41.764Z,1513275881.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:42.167Z,1513275882.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:42.565Z,1513275882.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:42.958Z,1513275882.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:43.354Z,1513275883.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:43.794Z,1513275883.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:44.156Z,1513275884.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:44.563Z,1513275884.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:44.968Z,1513275884.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:45.369Z,1513275885.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:45.759Z,1513275885.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:46.172Z,1513275886.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:46.571Z,1513275886.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:46.964Z,1513275886.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:47.366Z,1513275887.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:47.769Z,1513275887.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:48.169Z,1513275888.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:48.587Z,1513275888.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:48.958Z,1513275888.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:49.355Z,1513275889.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:49.802Z,1513275889.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:50.197Z,1513275890.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:50.568Z,1513275890.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:51.005Z,1513275891.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:51.365Z,1513275891.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:51.766Z,1513275891.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:52.187Z,1513275892.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:52.567Z,1513275892.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:52.987Z,1513275892.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:53.455Z,1513275893.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:53.771Z,1513275893.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:54.164Z,1513275894.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:54.559Z,1513275894.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:54.971Z,1513275894.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:55.371Z,1513275895.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:55.751Z,1513275895.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:56.168Z,1513275896.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:56.581Z,1513275896.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:56.995Z,1513275896.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:57.348Z,1513275897.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:57.753Z,1513275897.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:58.181Z,1513275898.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:58.564Z,1513275898.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:58.987Z,1513275898.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:59.364Z,1513275899.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:24:59.787Z,1513275899.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:00.184Z,1513275900.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:00.587Z,1513275900.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:00.957Z,1513275900.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:01.391Z,1513275901.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:01.761Z,1513275901.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:02.165Z,1513275902.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:02.563Z,1513275902.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:02.985Z,1513275902.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:03.359Z,1513275903.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:03.759Z,1513275903.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:04.163Z,1513275904.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:04.559Z,1513275904.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:04.967Z,1513275904.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:05.368Z,1513275905.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:05.772Z,1513275905.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:06.159Z,1513275906.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:06.568Z,1513275906.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:06.964Z,1513275906.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:07.361Z,1513275907.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:07.759Z,1513275907.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:08.183Z,1513275908.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:08.579Z,1513275908.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:08.976Z,1513275908.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:09.415Z,1513275909.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:09.764Z,1513275909.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:10.166Z,1513275910.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:10.565Z,1513275910.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:10.975Z,1513275910.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:11.382Z,1513275911.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:11.776Z,1513275911.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:12.172Z,1513275912.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:12.594Z,1513275912.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:13.019Z,1513275913.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:13.356Z,1513275913.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:13.756Z,1513275913.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:14.188Z,1513275914.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:14.561Z,1513275914.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:14.999Z,1513275914.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:15.357Z,1513275915.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:15.839Z,1513275915.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:16.156Z,1513275916.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:16.566Z,1513275916.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:16.968Z,1513275916.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:17.368Z,1513275917.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:17.769Z,1513275917.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:18.164Z,1513275918.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:18.563Z,1513275918.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:19.014Z,1513275919.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:19.366Z,1513275919.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:19.760Z,1513275919.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:20.165Z,1513275920.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:20.576Z,1513275920.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:20.972Z,1513275920.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:21.358Z,1513275921.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:21.756Z,1513275921.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:22.231Z,1513275922.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:22.562Z,1513275922.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:22.964Z,1513275922.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:23.411Z,1513275923.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:23.773Z,1513275923.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:24.166Z,1513275924.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:24.554Z,1513275924.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:24.964Z,1513275924.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:25.392Z,1513275925.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:25.766Z,1513275925.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:26.172Z,1513275926.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:26.576Z,1513275926.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:26.980Z,1513275926.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:27.371Z,1513275927.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:27.832Z,1513275927.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:28.156Z,1513275928.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:28.610Z,1513275928.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:28.957Z,1513275928.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:29.386Z,1513275929.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:29.760Z,1513275929.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:30.155Z,1513275930.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:30.571Z,1513275930.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:30.955Z,1513275930.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:31.354Z,1513275931.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:31.795Z,1513275931.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:32.169Z,1513275932.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:32.578Z,1513275932.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:32.987Z,1513275932.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:36.695Z,1513275936.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:36.818Z,1513275936.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:37.231Z,1513275937.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:37.603Z,1513275937.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:38.047Z,1513275938.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:38.398Z,1513275938.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:38.792Z,1513275938.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:39.193Z,1513275939.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:39.598Z,1513275939.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:40.024Z,1513275940.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:40.396Z,1513275940.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:40.808Z,1513275940.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:41.207Z,1513275941.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:41.576Z,1513275941.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x20367 got:0x1858
2017-12-14T18:25:41.603Z,1513275941.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:42.059Z,1513275942.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:42.410Z,1513275942.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:42.800Z,1513275942.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:43.205Z,1513275943.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:43.574Z,1513275943.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:44.001Z,1513275944.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:44.458Z,1513275944.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:44.781Z,1513275944.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:45.211Z,1513275945.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:45.609Z,1513275945.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:46.007Z,1513275946.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:46.427Z,1513275946.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:46.783Z,1513275946.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:47.197Z,1513275947.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:47.620Z,1513275947.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:48.009Z,1513275948.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:48.407Z,1513275948.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:48.815Z,1513275948.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:49.185Z,1513275949.185 [PNI_TCM](ERROR): CRC does not match. Expected:0x7065 got:0x49334
2017-12-14T18:25:49.206Z,1513275949.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:49.584Z,1513275949.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:50.015Z,1513275950.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:50.415Z,1513275950.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:50.788Z,1513275950.788 [PNI_TCM](ERROR): CRC does not match. Expected:0x22412 got:0x16851
2017-12-14T18:25:50.815Z,1513275950.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:51.187Z,1513275951.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:51.615Z,1513275951.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:52.020Z,1513275952.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:52.410Z,1513275952.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:52.779Z,1513275952.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x41995 got:0x62727
2017-12-14T18:25:52.809Z,1513275952.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:53.192Z,1513275953.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:53.607Z,1513275953.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:54.051Z,1513275954.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:54.396Z,1513275954.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:54.796Z,1513275954.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:55.211Z,1513275955.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:55.596Z,1513275955.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:56.052Z,1513275956.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:56.406Z,1513275956.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:56.807Z,1513275956.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:57.255Z,1513275957.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:57.608Z,1513275957.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:57.987Z,1513275957.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:58.435Z,1513275958.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:58.831Z,1513275958.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:59.190Z,1513275959.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:25:59.593Z,1513275959.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:00.039Z,1513275960.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:00.410Z,1513275960.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x38798 got:0x36367
2017-12-14T18:26:00.435Z,1513275960.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:00.833Z,1513275960.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:01.184Z,1513275961.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:01.595Z,1513275961.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:02.012Z,1513275962.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:02.404Z,1513275962.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:02.796Z,1513275962.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:03.196Z,1513275963.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:03.616Z,1513275963.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:04.007Z,1513275964.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:04.400Z,1513275964.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:04.826Z,1513275964.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:05.206Z,1513275965.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:05.585Z,1513275965.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:06.027Z,1513275966.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:06.407Z,1513275966.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:06.818Z,1513275966.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x49675 got:0x37007
2017-12-14T18:26:06.855Z,1513275966.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:07.202Z,1513275967.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:07.584Z,1513275967.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:08.025Z,1513275968.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:08.401Z,1513275968.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:08.799Z,1513275968.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:09.228Z,1513275969.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:09.588Z,1513275969.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:10.107Z,1513275970.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:10.404Z,1513275970.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:10.804Z,1513275970.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:11.210Z,1513275971.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:11.615Z,1513275971.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:11.982Z,1513275971.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:12.400Z,1513275972.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:12.807Z,1513275972.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:13.190Z,1513275973.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:13.599Z,1513275973.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:14.007Z,1513275974.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:14.442Z,1513275974.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:14.796Z,1513275974.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:15.192Z,1513275975.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:15.600Z,1513275975.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:16.023Z,1513275976.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:16.483Z,1513275976.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:16.811Z,1513275976.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:17.200Z,1513275977.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:17.608Z,1513275977.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:18.045Z,1513275978.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:18.423Z,1513275978.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:18.815Z,1513275978.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:19.251Z,1513275979.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:19.616Z,1513275979.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:20.087Z,1513275980.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:20.411Z,1513275980.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:20.799Z,1513275980.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:21.200Z,1513275981.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:21.687Z,1513275981.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:22.020Z,1513275982.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:22.447Z,1513275982.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:22.810Z,1513275982.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:23.267Z,1513275983.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:23.615Z,1513275983.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:24.067Z,1513275984.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:24.418Z,1513275984.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:24.842Z,1513275984.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:25.215Z,1513275985.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:25.606Z,1513275985.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:26.041Z,1513275986.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:26.468Z,1513275986.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:26.798Z,1513275986.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:27.207Z,1513275987.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:27.616Z,1513275987.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:27.996Z,1513275987.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:28.396Z,1513275988.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:28.822Z,1513275988.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:29.240Z,1513275989.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:29.588Z,1513275989.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:30.049Z,1513275990.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:30.432Z,1513275990.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:30.824Z,1513275990.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:31.208Z,1513275991.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:31.639Z,1513275991.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:32.053Z,1513275992.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:32.413Z,1513275992.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:32.800Z,1513275992.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:33.245Z,1513275993.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:39.969Z,1513275999.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:40.121Z,1513276000.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:40.508Z,1513276000.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:40.919Z,1513276000.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:41.296Z,1513276001.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:41.712Z,1513276001.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:42.164Z,1513276002.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:42.530Z,1513276002.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:42.931Z,1513276002.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:43.364Z,1513276003.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:43.688Z,1513276003.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:44.138Z,1513276004.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:44.488Z,1513276004.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:44.956Z,1513276004.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:45.311Z,1513276005.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:45.740Z,1513276005.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:46.096Z,1513276006.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:46.525Z,1513276006.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:46.908Z,1513276006.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:47.299Z,1513276007.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:47.726Z,1513276007.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:48.111Z,1513276008.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:48.484Z,1513276008.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:48.891Z,1513276008.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:49.284Z,1513276009.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:49.690Z,1513276009.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:50.099Z,1513276010.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:50.099Z,1513276010.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 357
2017-12-14T18:26:50.099Z,1513276010.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:26:50.101Z,1513276010.101 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:50.101Z,1513276010.101 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 357
2017-12-14T18:26:50.101Z,1513276010.101 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:26:50.103Z,1513276010.103 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:50.103Z,1513276010.103 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 357
2017-12-14T18:26:50.103Z,1513276010.103 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:26:50.131Z,1513276010.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:26:50.132Z,1513276010.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:26:50.132Z,1513276010.132 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:26:50.527Z,1513276010.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:26:50.527Z,1513276010.527 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 357
2017-12-14T18:26:50.528Z,1513276010.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:26:50.528Z,1513276010.528 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 357
2017-12-14T18:26:50.528Z,1513276010.528 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:26:50.528Z,1513276010.528 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 357
2017-12-14T18:26:50.896Z,1513276010.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:26:50.896Z,1513276010.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:26:50.896Z,1513276010.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:26:50.897Z,1513276010.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:26:50.897Z,1513276010.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:26:50.898Z,1513276010.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:26:50.898Z,1513276010.898 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:26:50.898Z,1513276010.898 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:26:50.899Z,1513276010.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:26:51.288Z,1513276011.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:51.685Z,1513276011.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:52.097Z,1513276012.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:52.496Z,1513276012.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:52.945Z,1513276012.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:53.335Z,1513276013.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:53.699Z,1513276013.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:54.090Z,1513276014.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:54.507Z,1513276014.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:54.896Z,1513276014.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:55.307Z,1513276015.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:55.703Z,1513276015.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:56.135Z,1513276016.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:56.481Z,1513276016.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:56.960Z,1513276016.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:57.291Z,1513276017.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:57.716Z,1513276017.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:58.087Z,1513276018.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:58.500Z,1513276018.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:58.887Z,1513276018.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:59.288Z,1513276019.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:26:59.692Z,1513276019.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:00.103Z,1513276020.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:00.497Z,1513276020.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:00.888Z,1513276020.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:01.290Z,1513276021.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:01.677Z,1513276021.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:02.076Z,1513276022.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:02.522Z,1513276022.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:02.895Z,1513276022.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:03.299Z,1513276023.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:03.689Z,1513276023.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:04.087Z,1513276024.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:04.503Z,1513276024.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:04.878Z,1513276024.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:05.303Z,1513276025.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:05.754Z,1513276025.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:06.115Z,1513276026.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:06.485Z,1513276026.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:06.922Z,1513276026.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:07.274Z,1513276027.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:07.674Z,1513276027.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:08.076Z,1513276028.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:08.475Z,1513276028.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:08.912Z,1513276028.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:09.289Z,1513276029.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:09.691Z,1513276029.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:10.079Z,1513276030.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:10.479Z,1513276030.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:10.875Z,1513276030.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:11.287Z,1513276031.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:11.680Z,1513276031.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:12.108Z,1513276032.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:12.492Z,1513276032.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:12.927Z,1513276032.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:13.272Z,1513276033.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:13.676Z,1513276033.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:14.079Z,1513276034.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:14.477Z,1513276034.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:14.888Z,1513276034.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:15.335Z,1513276035.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:15.691Z,1513276035.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:16.076Z,1513276036.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:16.476Z,1513276036.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:16.875Z,1513276036.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:17.378Z,1513276037.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:17.679Z,1513276037.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:18.088Z,1513276038.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:18.494Z,1513276038.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:18.888Z,1513276038.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:19.288Z,1513276039.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:19.679Z,1513276039.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:20.079Z,1513276040.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:20.474Z,1513276040.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:20.889Z,1513276040.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:21.295Z,1513276041.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:21.695Z,1513276041.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:22.106Z,1513276042.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:22.495Z,1513276042.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:22.891Z,1513276042.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:23.299Z,1513276043.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:23.691Z,1513276043.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:24.097Z,1513276044.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:24.487Z,1513276044.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:24.903Z,1513276044.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:25.303Z,1513276045.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:25.699Z,1513276045.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:26.087Z,1513276046.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:26.508Z,1513276046.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:26.884Z,1513276046.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:27.335Z,1513276047.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:27.695Z,1513276047.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:28.123Z,1513276048.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:28.484Z,1513276048.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:28.920Z,1513276048.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:29.294Z,1513276049.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:29.686Z,1513276049.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:30.101Z,1513276050.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:30.511Z,1513276050.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:30.884Z,1513276050.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:31.291Z,1513276051.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:31.684Z,1513276051.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:32.108Z,1513276052.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:32.484Z,1513276052.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:32.916Z,1513276052.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:33.288Z,1513276053.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:36.820Z,1513276056.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:36.979Z,1513276056.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:37.292Z,1513276057.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:37.699Z,1513276057.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:38.099Z,1513276058.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:38.496Z,1513276058.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:38.904Z,1513276058.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:39.292Z,1513276059.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:39.704Z,1513276059.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:40.107Z,1513276060.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:40.544Z,1513276060.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:40.895Z,1513276060.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:41.391Z,1513276061.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:41.695Z,1513276061.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:42.107Z,1513276062.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:42.500Z,1513276062.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:42.900Z,1513276062.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:43.295Z,1513276063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:43.783Z,1513276063.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:44.090Z,1513276064.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:44.503Z,1513276064.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:44.906Z,1513276064.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:45.315Z,1513276065.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:45.697Z,1513276065.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:46.104Z,1513276066.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:46.501Z,1513276066.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:46.940Z,1513276066.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:47.306Z,1513276067.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:47.743Z,1513276067.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:48.111Z,1513276068.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:48.516Z,1513276068.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:48.959Z,1513276068.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:49.306Z,1513276069.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:49.706Z,1513276069.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:50.164Z,1513276070.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:50.494Z,1513276070.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:50.936Z,1513276070.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:51.319Z,1513276071.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:51.700Z,1513276071.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:52.091Z,1513276072.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:52.489Z,1513276072.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:52.889Z,1513276072.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:53.290Z,1513276073.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:53.695Z,1513276073.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:54.096Z,1513276074.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:54.496Z,1513276074.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:54.903Z,1513276074.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:55.293Z,1513276075.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:55.694Z,1513276075.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:56.095Z,1513276076.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:56.543Z,1513276076.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:56.900Z,1513276076.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:57.307Z,1513276077.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:57.707Z,1513276077.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:58.091Z,1513276078.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:58.498Z,1513276078.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:58.996Z,1513276078.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:59.328Z,1513276079.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:27:59.741Z,1513276079.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:00.351Z,1513276080.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:00.503Z,1513276080.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:00.901Z,1513276080.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:01.296Z,1513276081.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:01.696Z,1513276081.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:02.099Z,1513276082.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:02.492Z,1513276082.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:02.931Z,1513276082.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:03.333Z,1513276083.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:03.711Z,1513276083.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:04.095Z,1513276084.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:04.500Z,1513276084.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:04.895Z,1513276084.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:05.297Z,1513276085.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:05.699Z,1513276085.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:06.115Z,1513276086.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:06.537Z,1513276086.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:06.910Z,1513276086.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:07.298Z,1513276087.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:07.691Z,1513276087.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:08.099Z,1513276088.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:08.507Z,1513276088.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:08.914Z,1513276088.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:09.306Z,1513276089.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:09.708Z,1513276089.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:10.120Z,1513276090.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:10.495Z,1513276090.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:10.899Z,1513276090.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:11.319Z,1513276091.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:11.711Z,1513276091.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:12.109Z,1513276092.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:12.535Z,1513276092.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:12.915Z,1513276092.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:13.323Z,1513276093.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:13.711Z,1513276093.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:14.088Z,1513276094.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:14.499Z,1513276094.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:14.920Z,1513276094.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:15.307Z,1513276095.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:15.719Z,1513276095.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:16.087Z,1513276096.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:16.495Z,1513276096.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:16.890Z,1513276096.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:17.295Z,1513276097.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:17.691Z,1513276097.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:18.094Z,1513276098.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:18.518Z,1513276098.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:18.919Z,1513276098.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:19.296Z,1513276099.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:19.693Z,1513276099.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:20.092Z,1513276100.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:20.495Z,1513276100.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:20.899Z,1513276100.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:21.324Z,1513276101.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:21.736Z,1513276101.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:22.152Z,1513276102.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:22.501Z,1513276102.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:22.895Z,1513276102.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:23.292Z,1513276103.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:23.689Z,1513276103.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:24.103Z,1513276104.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:24.496Z,1513276104.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:24.924Z,1513276104.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:25.347Z,1513276105.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:25.696Z,1513276105.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:26.095Z,1513276106.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:26.496Z,1513276106.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:26.900Z,1513276106.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:27.307Z,1513276107.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:27.700Z,1513276107.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:28.089Z,1513276108.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:28.554Z,1513276108.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:28.894Z,1513276108.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:29.303Z,1513276109.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:29.711Z,1513276109.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:30.108Z,1513276110.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:30.514Z,1513276110.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:30.904Z,1513276110.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:31.289Z,1513276111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:31.733Z,1513276111.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:32.119Z,1513276112.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:32.514Z,1513276112.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:32.911Z,1513276112.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:33.309Z,1513276113.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:36.873Z,1513276116.873 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:28:36.873Z,1513276116.873 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:28:36.873Z,1513276116.873 [BPC1](ERROR): Communications Fault
2017-12-14T18:28:36.883Z,1513276116.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:36.912Z,1513276116.912 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:28:37.014Z,1513276117.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:37.379Z,1513276117.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:37.782Z,1513276117.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:37.796Z,1513276117.796 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:28:37.796Z,1513276117.796 [BPC1] No Fault, FailCount= 1
2017-12-14T18:28:38.231Z,1513276118.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:38.585Z,1513276118.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:38.999Z,1513276118.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:39.395Z,1513276119.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:39.795Z,1513276119.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:40.190Z,1513276120.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:40.581Z,1513276120.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:40.983Z,1513276120.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:41.387Z,1513276121.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:41.787Z,1513276121.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:42.193Z,1513276122.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:42.599Z,1513276122.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:43.015Z,1513276123.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:43.383Z,1513276123.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:43.786Z,1513276123.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:44.181Z,1513276124.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:44.586Z,1513276124.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:44.999Z,1513276124.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:45.398Z,1513276125.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:45.793Z,1513276125.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:46.188Z,1513276126.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:46.611Z,1513276126.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:47.004Z,1513276127.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:47.375Z,1513276127.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:47.791Z,1513276127.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:48.188Z,1513276128.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:48.601Z,1513276128.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:48.995Z,1513276128.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:49.384Z,1513276129.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:49.785Z,1513276129.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:50.186Z,1513276130.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:50.639Z,1513276130.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:50.995Z,1513276130.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:51.394Z,1513276131.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:51.791Z,1513276131.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:52.186Z,1513276132.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:52.591Z,1513276132.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:52.986Z,1513276132.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:53.391Z,1513276133.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:53.841Z,1513276133.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:54.208Z,1513276134.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:54.608Z,1513276134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:55.006Z,1513276135.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:55.380Z,1513276135.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:55.779Z,1513276135.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:56.188Z,1513276136.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:56.591Z,1513276136.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:56.989Z,1513276136.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:57.391Z,1513276137.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:57.825Z,1513276137.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:58.187Z,1513276138.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:58.634Z,1513276138.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:58.987Z,1513276138.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:59.423Z,1513276139.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:28:59.782Z,1513276139.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:00.295Z,1513276140.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:00.607Z,1513276140.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:00.993Z,1513276140.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:01.391Z,1513276141.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:01.790Z,1513276141.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:02.194Z,1513276142.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:02.588Z,1513276142.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:02.996Z,1513276142.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:03.392Z,1513276143.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:03.823Z,1513276143.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:04.192Z,1513276144.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:04.595Z,1513276144.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:04.991Z,1513276144.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:05.392Z,1513276145.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:05.790Z,1513276145.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:06.195Z,1513276146.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:06.614Z,1513276146.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:06.995Z,1513276146.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:07.395Z,1513276147.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:07.771Z,1513276147.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:08.187Z,1513276148.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:08.620Z,1513276148.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:09.002Z,1513276149.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:09.391Z,1513276149.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:09.816Z,1513276149.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:10.206Z,1513276150.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:10.575Z,1513276150.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:10.999Z,1513276150.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:11.378Z,1513276151.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:11.779Z,1513276151.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:12.200Z,1513276152.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:12.604Z,1513276152.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:13.030Z,1513276153.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:13.379Z,1513276153.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:13.776Z,1513276153.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:14.180Z,1513276154.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:14.590Z,1513276154.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:14.991Z,1513276154.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:15.392Z,1513276155.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:15.799Z,1513276155.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:16.182Z,1513276156.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:16.580Z,1513276156.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:16.980Z,1513276156.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:17.379Z,1513276157.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:17.777Z,1513276157.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:18.207Z,1513276158.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:18.600Z,1513276158.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:19.020Z,1513276159.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:19.383Z,1513276159.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:19.807Z,1513276159.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:20.182Z,1513276160.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:20.611Z,1513276160.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:21.039Z,1513276161.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:21.407Z,1513276161.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:21.781Z,1513276161.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:22.214Z,1513276162.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:22.611Z,1513276162.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:23.022Z,1513276163.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:23.379Z,1513276163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:23.784Z,1513276163.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:24.180Z,1513276164.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:24.591Z,1513276164.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:24.984Z,1513276164.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:25.380Z,1513276165.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:25.830Z,1513276165.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:26.184Z,1513276166.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:26.577Z,1513276166.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:26.984Z,1513276166.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:27.384Z,1513276167.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:27.788Z,1513276167.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:28.180Z,1513276168.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:28.591Z,1513276168.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:28.988Z,1513276168.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:29.397Z,1513276169.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:29.792Z,1513276169.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:30.138Z,1513276170.138 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T18:29:30.138Z,1513276170.138 [NAL9602] Data Fault, FailCount= 3
2017-12-14T18:29:30.139Z,1513276170.139 [NAL9602](ERROR): Data Fault
2017-12-14T18:29:30.171Z,1513276170.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:30.205Z,1513276170.205 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T18:29:30.206Z,1513276170.206 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:29:30.538Z,1513276170.538 [NAL9602](INFO): Powering down
2017-12-14T18:29:30.591Z,1513276170.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:30.977Z,1513276170.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:31.416Z,1513276171.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:31.429Z,1513276171.429 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T18:29:31.429Z,1513276171.429 [NAL9602] No Fault, FailCount= 3
2017-12-14T18:29:31.787Z,1513276171.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:32.233Z,1513276172.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:32.581Z,1513276172.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:32.584Z,1513276172.584 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T18:29:32.584Z,1513276172.584 [Default:CheckIn:C.Wait] Stopped
2017-12-14T18:29:32.584Z,1513276172.584 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T18:29:32.584Z,1513276172.584 [Default:CheckIn:D] Running Loop=1
2017-12-14T18:29:32.980Z,1513276172.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:32.983Z,1513276172.983 [Default:CheckIn:D] Stopped
2017-12-14T18:29:32.983Z,1513276172.983 [Default:CheckIn:E] Running Loop=1
2017-12-14T18:29:33.386Z,1513276173.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:33.390Z,1513276173.390 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1076.293229 min 
2017-12-14T18:29:33.390Z,1513276173.390 [Default:CheckIn:E] Stopped
2017-12-14T18:29:33.390Z,1513276173.390 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn] Stopped
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn](INFO): Running loop #104
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn] Running Loop=104
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T18:29:33.391Z,1513276173.391 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T18:29:36.853Z,1513276176.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:36.998Z,1513276176.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:37.347Z,1513276177.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:37.747Z,1513276177.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:38.147Z,1513276178.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:38.575Z,1513276178.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:38.957Z,1513276178.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:39.351Z,1513276179.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:39.750Z,1513276179.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:40.151Z,1513276180.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:40.547Z,1513276180.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:40.945Z,1513276180.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:41.355Z,1513276181.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:41.801Z,1513276181.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:42.155Z,1513276182.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:42.563Z,1513276182.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:42.992Z,1513276182.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:43.351Z,1513276183.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:43.805Z,1513276183.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:44.151Z,1513276184.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:44.575Z,1513276184.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:45.020Z,1513276185.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:45.374Z,1513276185.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:45.757Z,1513276185.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:46.157Z,1513276186.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:46.558Z,1513276186.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:46.959Z,1513276186.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:47.362Z,1513276187.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:47.761Z,1513276187.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:48.208Z,1513276188.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:48.575Z,1513276188.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:48.947Z,1513276188.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:49.347Z,1513276189.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:49.746Z,1513276189.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.146Z,1513276190.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.546Z,1513276190.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.945Z,1513276190.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.945Z,1513276190.945 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 358
2017-12-14T18:29:50.945Z,1513276190.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:29:50.947Z,1513276190.947 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.947Z,1513276190.947 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 358
2017-12-14T18:29:50.947Z,1513276190.947 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:29:50.949Z,1513276190.949 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:50.949Z,1513276190.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 358
2017-12-14T18:29:50.949Z,1513276190.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:29:50.979Z,1513276190.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:29:50.979Z,1513276190.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:29:50.979Z,1513276190.979 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:29:51.438Z,1513276191.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:29:51.438Z,1513276191.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 358
2017-12-14T18:29:51.439Z,1513276191.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:29:51.439Z,1513276191.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 358
2017-12-14T18:29:51.439Z,1513276191.439 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:29:51.439Z,1513276191.439 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 358
2017-12-14T18:29:51.763Z,1513276191.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:29:51.763Z,1513276191.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:29:51.763Z,1513276191.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:29:51.764Z,1513276191.764 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:29:51.764Z,1513276191.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:29:51.764Z,1513276191.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:29:51.765Z,1513276191.765 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:29:51.765Z,1513276191.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:29:51.766Z,1513276191.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:29:52.163Z,1513276192.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:52.545Z,1513276192.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:52.959Z,1513276192.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:53.351Z,1513276193.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:53.791Z,1513276193.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:54.172Z,1513276194.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:54.510Z,1513276194.510 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T18:29:54.510Z,1513276194.510 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T18:29:54.510Z,1513276194.510 [DropWeight](ERROR): Hardware Fault
2017-12-14T18:29:54.622Z,1513276194.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:54.654Z,1513276194.654 [CBIT](INFO): Critical error at 20171214T182954
2017-12-14T18:29:54.656Z,1513276194.656 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T18:29:54.656Z,1513276194.656 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T18:29:54.938Z,1513276194.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:54.974Z,1513276194.974 [CBIT](INFO): Critical error at 20171214T182954
2017-12-14T18:29:55.344Z,1513276195.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:55.746Z,1513276195.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:56.140Z,1513276196.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:56.542Z,1513276196.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:56.945Z,1513276196.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:57.341Z,1513276197.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:57.795Z,1513276197.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:58.149Z,1513276198.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:58.545Z,1513276198.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:58.946Z,1513276198.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:59.344Z,1513276199.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:29:59.747Z,1513276199.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:00.147Z,1513276200.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:00.544Z,1513276200.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:00.954Z,1513276200.954 [NAL9602](INFO): Powering up NAL9602
2017-12-14T18:30:01.029Z,1513276201.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:01.345Z,1513276201.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:01.747Z,1513276201.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:02.147Z,1513276202.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:02.554Z,1513276202.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:02.951Z,1513276202.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:03.351Z,1513276203.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:03.748Z,1513276203.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:04.202Z,1513276204.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:04.548Z,1513276204.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:04.962Z,1513276204.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:05.367Z,1513276205.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:05.783Z,1513276205.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:06.154Z,1513276206.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:06.557Z,1513276206.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:06.971Z,1513276206.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:07.405Z,1513276207.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:07.775Z,1513276207.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:08.153Z,1513276208.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:08.550Z,1513276208.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:08.937Z,1513276208.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:09.351Z,1513276209.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:09.747Z,1513276209.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:10.146Z,1513276210.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:10.582Z,1513276210.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:10.961Z,1513276210.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:11.357Z,1513276211.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:11.764Z,1513276211.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:12.106Z,1513276212.106 [NAL9602](INFO): NAL9602 initialized
2017-12-14T18:30:12.165Z,1513276212.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:12.544Z,1513276212.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:12.969Z,1513276212.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:13.365Z,1513276213.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:13.826Z,1513276213.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:14.147Z,1513276214.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:14.555Z,1513276214.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:14.947Z,1513276214.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:15.362Z,1513276215.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:15.763Z,1513276215.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:16.196Z,1513276216.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:16.555Z,1513276216.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:16.955Z,1513276216.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:17.357Z,1513276217.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:17.760Z,1513276217.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:18.148Z,1513276218.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:18.564Z,1513276218.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:18.965Z,1513276218.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:19.364Z,1513276219.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:19.749Z,1513276219.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:20.197Z,1513276220.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:20.562Z,1513276220.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:20.954Z,1513276220.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:21.361Z,1513276221.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:21.760Z,1513276221.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:22.163Z,1513276222.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:22.549Z,1513276222.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:22.994Z,1513276222.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:23.372Z,1513276223.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:23.761Z,1513276223.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:24.159Z,1513276224.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:24.568Z,1513276224.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:24.971Z,1513276224.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:25.366Z,1513276225.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:25.771Z,1513276225.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:26.142Z,1513276226.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:26.590Z,1513276226.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:26.975Z,1513276226.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:27.379Z,1513276227.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:27.753Z,1513276227.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:28.202Z,1513276228.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:28.595Z,1513276228.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:28.954Z,1513276228.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:29.387Z,1513276229.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:29.788Z,1513276229.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:30.182Z,1513276230.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:30.575Z,1513276230.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:30.955Z,1513276230.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:31.352Z,1513276231.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:31.748Z,1513276231.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:32.151Z,1513276232.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:32.546Z,1513276232.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:32.947Z,1513276232.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:33.348Z,1513276233.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:33.760Z,1513276233.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:37.239Z,1513276237.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:37.378Z,1513276237.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:37.708Z,1513276237.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:38.109Z,1513276238.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:38.551Z,1513276238.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:38.908Z,1513276238.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:39.351Z,1513276239.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:39.736Z,1513276239.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:40.135Z,1513276240.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:40.532Z,1513276240.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:40.931Z,1513276240.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:41.383Z,1513276241.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:41.707Z,1513276241.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:42.134Z,1513276242.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:42.559Z,1513276242.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:42.940Z,1513276242.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:43.339Z,1513276243.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:43.707Z,1513276243.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:44.111Z,1513276244.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:44.510Z,1513276244.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:44.908Z,1513276244.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:45.320Z,1513276245.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:45.764Z,1513276245.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:46.119Z,1513276246.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:46.515Z,1513276246.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:46.923Z,1513276246.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:47.314Z,1513276247.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:47.715Z,1513276247.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:48.115Z,1513276248.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:48.523Z,1513276248.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:49.003Z,1513276249.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:49.316Z,1513276249.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:49.715Z,1513276249.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:50.120Z,1513276250.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:50.563Z,1513276250.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:50.918Z,1513276250.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:51.348Z,1513276251.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:51.362Z,1513276251.362 [CBIT](IMPORTANT): Beginning ground fault scan
2017-12-14T18:30:51.731Z,1513276251.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:52.179Z,1513276252.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:52.507Z,1513276252.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:52.912Z,1513276252.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:53.306Z,1513276253.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:53.706Z,1513276253.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:54.111Z,1513276254.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:54.528Z,1513276254.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:54.940Z,1513276254.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:55.340Z,1513276255.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:55.710Z,1513276255.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:56.111Z,1513276256.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:56.509Z,1513276256.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:56.908Z,1513276256.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:57.339Z,1513276257.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:57.737Z,1513276257.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:58.126Z,1513276258.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:58.534Z,1513276258.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:58.911Z,1513276258.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:59.319Z,1513276259.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:30:59.714Z,1513276259.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:00.115Z,1513276260.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:00.566Z,1513276260.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:00.931Z,1513276260.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:01.321Z,1513276261.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:01.767Z,1513276261.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:02.118Z,1513276262.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:02.161Z,1513276262.161 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.132399
CHAN A1 (24V): 0.128798
CHAN A2 (12V): 0.000262
CHAN A3 (5V): -0.001925
CHAN B0 (3.3V): -0.000611
CHAN B1 (3.15aV): -0.001450
CHAN B2 (3.15bV): -0.001558
CHAN B3 (GND): -0.002301
OPEN: 0.003432
Full Scale Calc: 4.765 mA, -1.589 mA
2017-12-14T18:31:02.520Z,1513276262.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:02.924Z,1513276262.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:03.331Z,1513276263.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:03.730Z,1513276263.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:04.132Z,1513276264.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:04.521Z,1513276264.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:04.964Z,1513276264.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:05.327Z,1513276265.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:05.727Z,1513276265.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:06.126Z,1513276266.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:06.529Z,1513276266.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:06.936Z,1513276266.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:07.328Z,1513276267.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:07.709Z,1513276267.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:08.155Z,1513276268.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:08.516Z,1513276268.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:08.913Z,1513276268.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:09.318Z,1513276269.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:09.721Z,1513276269.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:10.148Z,1513276270.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:10.519Z,1513276270.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:10.920Z,1513276270.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:11.317Z,1513276271.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:11.723Z,1513276271.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:12.171Z,1513276272.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:12.551Z,1513276272.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:12.939Z,1513276272.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:13.328Z,1513276273.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:13.736Z,1513276273.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:14.136Z,1513276274.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:14.631Z,1513276274.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:14.985Z,1513276274.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:15.340Z,1513276275.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:15.736Z,1513276275.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:16.152Z,1513276276.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:16.559Z,1513276276.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:16.917Z,1513276276.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:17.330Z,1513276277.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:17.755Z,1513276277.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:18.156Z,1513276278.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:18.540Z,1513276278.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:18.955Z,1513276278.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:19.367Z,1513276279.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:19.760Z,1513276279.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:20.154Z,1513276280.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:20.519Z,1513276280.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:20.936Z,1513276280.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:21.378Z,1513276281.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:21.740Z,1513276281.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:22.138Z,1513276282.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:22.544Z,1513276282.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:22.985Z,1513276282.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:23.337Z,1513276283.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:23.738Z,1513276283.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:24.138Z,1513276284.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:24.564Z,1513276284.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:24.963Z,1513276284.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:25.342Z,1513276285.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:25.732Z,1513276285.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:26.132Z,1513276286.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:26.543Z,1513276286.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:26.949Z,1513276286.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:27.352Z,1513276287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:27.764Z,1513276287.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:28.155Z,1513276288.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:28.587Z,1513276288.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:28.929Z,1513276288.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:29.336Z,1513276289.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:29.755Z,1513276289.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:30.186Z,1513276290.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:30.535Z,1513276290.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:30.941Z,1513276290.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:31.369Z,1513276291.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:31.725Z,1513276291.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:32.121Z,1513276292.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:32.560Z,1513276292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:32.916Z,1513276292.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:33.363Z,1513276293.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:33.740Z,1513276293.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:34.147Z,1513276294.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:40.947Z,1513276300.947 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:31:40.947Z,1513276300.947 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:31:40.947Z,1513276300.947 [BPC1](ERROR): Communications Fault
2017-12-14T18:31:40.964Z,1513276300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:41.018Z,1513276301.018 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:31:41.127Z,1513276301.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:41.532Z,1513276301.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:41.962Z,1513276301.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:42.028Z,1513276302.028 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:31:42.028Z,1513276302.028 [BPC1] No Fault, FailCount= 1
2017-12-14T18:31:42.403Z,1513276302.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:42.707Z,1513276302.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:43.117Z,1513276303.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:43.514Z,1513276303.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:44.013Z,1513276304.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:44.292Z,1513276304.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:44.727Z,1513276304.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:45.107Z,1513276305.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:45.524Z,1513276305.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:45.895Z,1513276305.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:46.303Z,1513276306.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:46.711Z,1513276306.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:47.115Z,1513276307.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:47.527Z,1513276307.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:47.920Z,1513276307.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:48.379Z,1513276308.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:48.710Z,1513276308.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:49.082Z,1513276309.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:49.483Z,1513276309.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:49.887Z,1513276309.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:50.333Z,1513276310.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:50.731Z,1513276310.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:51.088Z,1513276311.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:51.482Z,1513276311.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:51.961Z,1513276311.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:52.291Z,1513276312.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:52.685Z,1513276312.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:53.120Z,1513276313.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:53.499Z,1513276313.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:53.939Z,1513276313.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:54.294Z,1513276314.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:54.683Z,1513276314.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:55.084Z,1513276315.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:55.485Z,1513276315.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:55.941Z,1513276315.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:56.299Z,1513276316.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:56.696Z,1513276316.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:57.121Z,1513276317.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:57.483Z,1513276317.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:57.958Z,1513276317.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:58.307Z,1513276318.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:58.679Z,1513276318.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:59.081Z,1513276319.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:59.523Z,1513276319.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:31:59.911Z,1513276319.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:00.295Z,1513276320.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:00.723Z,1513276320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:01.096Z,1513276321.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:01.475Z,1513276321.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:01.879Z,1513276321.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:02.354Z,1513276322.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:02.711Z,1513276322.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:03.131Z,1513276323.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:03.482Z,1513276323.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:03.928Z,1513276323.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:04.338Z,1513276324.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:04.688Z,1513276324.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:05.082Z,1513276325.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:05.488Z,1513276325.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:05.963Z,1513276325.963 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:32:05.963Z,1513276325.963 [BPC1] Communications Fault, FailCount= 2
2017-12-14T18:32:05.963Z,1513276325.963 [BPC1](ERROR): Communications Fault
2017-12-14T18:32:05.982Z,1513276325.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:05.996Z,1513276325.996 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:32:06.289Z,1513276326.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:06.691Z,1513276326.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:07.175Z,1513276327.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:07.200Z,1513276327.200 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:32:07.200Z,1513276327.200 [BPC1] No Fault, FailCount= 2
2017-12-14T18:32:07.543Z,1513276327.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:07.952Z,1513276327.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:08.305Z,1513276328.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:08.709Z,1513276328.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:09.110Z,1513276329.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:09.479Z,1513276329.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:10.014Z,1513276330.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:10.368Z,1513276330.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:10.693Z,1513276330.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:11.086Z,1513276331.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:11.504Z,1513276331.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:11.993Z,1513276331.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:12.298Z,1513276332.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:12.696Z,1513276332.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:13.073Z,1513276333.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:13.519Z,1513276333.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:13.883Z,1513276333.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:14.294Z,1513276334.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:14.704Z,1513276334.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:15.103Z,1513276335.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:15.494Z,1513276335.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:15.907Z,1513276335.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:16.349Z,1513276336.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:16.762Z,1513276336.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:17.079Z,1513276337.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:17.504Z,1513276337.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:17.908Z,1513276337.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:18.368Z,1513276338.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:18.703Z,1513276338.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:19.081Z,1513276339.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:19.483Z,1513276339.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:19.994Z,1513276339.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:20.304Z,1513276340.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:20.691Z,1513276340.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:21.099Z,1513276341.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:21.486Z,1513276341.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:21.975Z,1513276341.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:22.288Z,1513276342.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:22.688Z,1513276342.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:23.087Z,1513276343.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:23.501Z,1513276343.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:23.969Z,1513276343.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:24.289Z,1513276344.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:24.681Z,1513276344.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:25.087Z,1513276345.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:25.487Z,1513276345.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:25.983Z,1513276345.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:26.340Z,1513276346.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:26.696Z,1513276346.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:27.096Z,1513276347.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:27.491Z,1513276347.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:27.890Z,1513276347.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:28.339Z,1513276348.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:28.691Z,1513276348.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:29.133Z,1513276349.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:29.492Z,1513276349.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:29.902Z,1513276349.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:30.352Z,1513276350.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:30.695Z,1513276350.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:31.102Z,1513276351.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:31.495Z,1513276351.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:31.903Z,1513276351.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:32.333Z,1513276352.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:32.727Z,1513276352.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:33.091Z,1513276353.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:33.482Z,1513276353.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:33.970Z,1513276353.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:34.320Z,1513276354.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:37.708Z,1513276357.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:37.848Z,1513276357.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:38.205Z,1513276358.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:38.607Z,1513276358.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:39.008Z,1513276359.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:39.402Z,1513276359.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:39.777Z,1513276359.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:40.183Z,1513276360.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:40.582Z,1513276360.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:40.985Z,1513276360.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:41.381Z,1513276361.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:41.778Z,1513276361.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:42.178Z,1513276362.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:42.586Z,1513276362.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:42.986Z,1513276362.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:43.385Z,1513276363.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:43.789Z,1513276363.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:44.187Z,1513276364.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:44.587Z,1513276364.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:44.986Z,1513276364.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:45.391Z,1513276365.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:45.791Z,1513276365.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:46.187Z,1513276366.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:46.597Z,1513276366.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:47.002Z,1513276367.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:47.403Z,1513276367.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:47.766Z,1513276367.766 [BPC1](ERROR): Failed to parse message.
2017-12-14T18:32:47.767Z,1513276367.767 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T18:32:47.767Z,1513276367.767 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:32:47.767Z,1513276367.767 [BPC1](ERROR): Data Fault
2017-12-14T18:32:47.807Z,1513276367.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:47.841Z,1513276367.841 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:32:48.192Z,1513276368.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:48.570Z,1513276368.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:48.999Z,1513276368.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:49.030Z,1513276369.030 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:32:49.030Z,1513276369.030 [BPC1] No Fault, FailCount= 1
2017-12-14T18:32:49.447Z,1513276369.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:49.804Z,1513276369.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:50.203Z,1513276370.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:50.595Z,1513276370.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:50.975Z,1513276370.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:51.377Z,1513276371.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:51.862Z,1513276371.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:51.863Z,1513276371.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 359
2017-12-14T18:32:51.863Z,1513276371.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:32:51.864Z,1513276371.864 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:51.864Z,1513276371.864 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 359
2017-12-14T18:32:51.865Z,1513276371.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:32:51.919Z,1513276371.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:51.919Z,1513276371.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 359
2017-12-14T18:32:51.920Z,1513276371.920 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:32:51.969Z,1513276371.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:32:51.969Z,1513276371.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:32:51.969Z,1513276371.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:32:52.209Z,1513276372.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:32:52.210Z,1513276372.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 359
2017-12-14T18:32:52.210Z,1513276372.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:32:52.210Z,1513276372.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 359
2017-12-14T18:32:52.211Z,1513276372.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:32:52.211Z,1513276372.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 359
2017-12-14T18:32:52.595Z,1513276372.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:32:52.595Z,1513276372.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:32:52.595Z,1513276372.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:32:52.596Z,1513276372.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:32:52.596Z,1513276372.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:32:52.596Z,1513276372.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:32:52.602Z,1513276372.602 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:32:52.602Z,1513276372.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:32:52.603Z,1513276372.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:32:53.003Z,1513276373.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:53.380Z,1513276373.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:53.779Z,1513276373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:54.179Z,1513276374.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:54.579Z,1513276374.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:54.977Z,1513276374.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:55.408Z,1513276375.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:55.788Z,1513276375.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:56.191Z,1513276376.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:56.580Z,1513276376.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:56.987Z,1513276376.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:57.382Z,1513276377.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:57.811Z,1513276377.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:58.286Z,1513276378.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:58.595Z,1513276378.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:59.003Z,1513276379.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:59.395Z,1513276379.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:32:59.785Z,1513276379.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:00.180Z,1513276380.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:00.589Z,1513276380.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:00.987Z,1513276380.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:01.400Z,1513276381.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:01.791Z,1513276381.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:02.192Z,1513276382.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:02.575Z,1513276382.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:02.979Z,1513276382.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:03.379Z,1513276383.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:03.778Z,1513276383.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:04.180Z,1513276384.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:04.636Z,1513276384.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:04.987Z,1513276384.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:05.384Z,1513276385.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:05.787Z,1513276385.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:06.195Z,1513276386.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:06.578Z,1513276386.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:06.981Z,1513276386.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:07.406Z,1513276387.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:07.835Z,1513276387.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:08.184Z,1513276388.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:08.613Z,1513276388.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:08.983Z,1513276388.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:09.391Z,1513276389.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:09.820Z,1513276389.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:10.182Z,1513276390.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:10.618Z,1513276390.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:10.999Z,1513276390.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:11.424Z,1513276391.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:11.797Z,1513276391.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:12.184Z,1513276392.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:12.595Z,1513276392.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:12.971Z,1513276392.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:13.398Z,1513276393.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:13.798Z,1513276393.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:14.305Z,1513276394.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:14.601Z,1513276394.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:14.974Z,1513276394.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:15.394Z,1513276395.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:15.786Z,1513276395.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:16.191Z,1513276396.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:16.599Z,1513276396.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:16.994Z,1513276396.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:17.626Z,1513276397.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:17.801Z,1513276397.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:18.180Z,1513276398.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:18.576Z,1513276398.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:18.976Z,1513276398.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:19.408Z,1513276399.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:19.823Z,1513276399.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:20.188Z,1513276400.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:20.587Z,1513276400.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:20.983Z,1513276400.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:21.383Z,1513276401.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:21.779Z,1513276401.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:22.178Z,1513276402.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:22.615Z,1513276402.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:23.120Z,1513276403.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:23.384Z,1513276403.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:23.781Z,1513276403.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:24.179Z,1513276404.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:24.586Z,1513276404.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:24.981Z,1513276404.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:25.384Z,1513276405.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:25.788Z,1513276405.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:26.183Z,1513276406.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:26.591Z,1513276406.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:26.987Z,1513276406.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:27.396Z,1513276407.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:27.783Z,1513276407.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:28.188Z,1513276408.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:28.597Z,1513276408.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:28.998Z,1513276408.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:29.393Z,1513276409.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:29.789Z,1513276409.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:30.194Z,1513276410.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:30.611Z,1513276410.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:30.992Z,1513276410.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:31.393Z,1513276411.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:31.844Z,1513276411.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:32.211Z,1513276412.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:32.616Z,1513276412.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:32.979Z,1513276412.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:33.460Z,1513276413.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:33.783Z,1513276413.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:34.184Z,1513276414.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:34.595Z,1513276414.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:38.047Z,1513276418.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:38.195Z,1513276418.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:38.547Z,1513276418.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:38.942Z,1513276418.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:39.343Z,1513276419.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:39.781Z,1513276419.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:40.147Z,1513276420.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:40.558Z,1513276420.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:40.952Z,1513276420.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:41.352Z,1513276421.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:41.778Z,1513276421.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:42.146Z,1513276422.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:42.554Z,1513276422.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:42.986Z,1513276422.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:43.361Z,1513276423.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:43.756Z,1513276423.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:44.153Z,1513276424.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:44.541Z,1513276424.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:44.951Z,1513276424.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:45.351Z,1513276425.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:45.744Z,1513276425.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:46.240Z,1513276426.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:46.554Z,1513276426.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:46.959Z,1513276426.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:47.363Z,1513276427.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:47.747Z,1513276427.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:48.149Z,1513276428.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:48.556Z,1513276428.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:48.950Z,1513276428.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:49.391Z,1513276429.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:49.763Z,1513276429.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:50.167Z,1513276430.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:50.555Z,1513276430.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:50.952Z,1513276430.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:51.348Z,1513276431.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:51.750Z,1513276431.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:52.167Z,1513276432.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:52.619Z,1513276432.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:52.963Z,1513276432.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:53.353Z,1513276433.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:53.752Z,1513276433.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:54.176Z,1513276434.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:54.563Z,1513276434.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:54.951Z,1513276434.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:55.383Z,1513276435.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:55.804Z,1513276435.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:56.187Z,1513276436.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:56.559Z,1513276436.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:56.962Z,1513276436.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:57.351Z,1513276437.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:57.748Z,1513276437.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:58.153Z,1513276438.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:58.552Z,1513276438.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:58.993Z,1513276438.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:59.359Z,1513276439.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:33:59.748Z,1513276439.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:00.156Z,1513276440.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:00.548Z,1513276440.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:00.956Z,1513276440.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:01.359Z,1513276441.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:01.759Z,1513276441.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:02.166Z,1513276442.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:02.563Z,1513276442.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:02.954Z,1513276442.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:03.354Z,1513276443.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:03.757Z,1513276443.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:04.152Z,1513276444.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:04.603Z,1513276444.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:04.967Z,1513276444.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:05.423Z,1513276445.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:05.763Z,1513276445.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:06.147Z,1513276446.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:06.540Z,1513276446.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:06.947Z,1513276446.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:07.368Z,1513276447.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:07.774Z,1513276447.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:08.152Z,1513276448.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:08.592Z,1513276448.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:08.942Z,1513276448.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:09.346Z,1513276449.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:09.741Z,1513276449.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:10.144Z,1513276450.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:10.551Z,1513276450.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:10.955Z,1513276450.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:11.348Z,1513276451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:11.798Z,1513276451.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:12.144Z,1513276452.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:12.552Z,1513276452.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:12.955Z,1513276452.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:13.359Z,1513276453.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:13.758Z,1513276453.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:14.153Z,1513276454.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:14.550Z,1513276454.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:14.975Z,1513276454.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:15.344Z,1513276455.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:15.739Z,1513276455.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:16.147Z,1513276456.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:16.573Z,1513276456.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:16.988Z,1513276456.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:17.357Z,1513276457.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:17.787Z,1513276457.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:18.210Z,1513276458.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:18.584Z,1513276458.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:18.943Z,1513276458.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:19.355Z,1513276459.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:19.763Z,1513276459.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:20.153Z,1513276460.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:20.551Z,1513276460.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:20.944Z,1513276460.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:21.364Z,1513276461.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:21.748Z,1513276461.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:22.150Z,1513276462.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:22.547Z,1513276462.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:22.976Z,1513276462.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:23.352Z,1513276463.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:23.747Z,1513276463.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:24.146Z,1513276464.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:24.592Z,1513276464.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:24.943Z,1513276464.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:25.378Z,1513276465.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:25.759Z,1513276465.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:26.164Z,1513276466.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:26.544Z,1513276466.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:26.986Z,1513276466.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:27.348Z,1513276467.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:27.746Z,1513276467.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:28.156Z,1513276468.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:28.565Z,1513276468.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:28.963Z,1513276468.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:29.363Z,1513276469.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:29.751Z,1513276469.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:30.147Z,1513276470.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:30.551Z,1513276470.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:30.948Z,1513276470.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:31.401Z,1513276471.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:31.757Z,1513276471.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:32.155Z,1513276472.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:32.607Z,1513276472.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:32.991Z,1513276472.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:33.348Z,1513276473.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:33.743Z,1513276473.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:33.747Z,1513276473.747 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T18:29:33.4Z
2017-12-14T18:34:33.747Z,1513276473.747 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:34:33.747Z,1513276473.747 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:34:34.144Z,1513276474.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:35.045Z,1513276475.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:35.198Z,1513276475.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:34:35.207Z,1513276475.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:35.993Z,1513276475.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:34:38.661Z,1513276478.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:38.739Z,1513276478.739 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20171214T002839/Courier0416.lzma
2017-12-14T18:34:38.810Z,1513276478.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:39.167Z,1513276479.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:39.509Z,1513276479.509 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0416.lzma.bak
2017-12-14T18:34:39.509Z,1513276479.509 [DataOverHttps](INFO): SBD MOMSN=5439363
2017-12-14T18:34:39.613Z,1513276479.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:40.768Z,1513276480.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:40.951Z,1513276480.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:44.355Z,1513276484.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:44.479Z,1513276484.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:44.855Z,1513276484.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:45.259Z,1513276485.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:45.640Z,1513276485.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:46.062Z,1513276486.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:49.467Z,1513276489.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:49.542Z,1513276489.542 [DataOverHttps](INFO): Sending 329 bytes from file Logs/20171214T002839/Express0417.lzma
2017-12-14T18:34:49.615Z,1513276489.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:49.974Z,1513276489.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:50.304Z,1513276490.304 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0417.lzma.bak
2017-12-14T18:34:50.304Z,1513276490.304 [DataOverHttps](INFO): SBD MOMSN=5439367
2017-12-14T18:34:50.375Z,1513276490.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:51.564Z,1513276491.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:51.574Z,1513276491.574 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:34:51.574Z,1513276491.574 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:34:51.574Z,1513276491.574 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:34:51.695Z,1513276491.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:55.178Z,1513276495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:55.346Z,1513276495.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:55.683Z,1513276495.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:56.076Z,1513276496.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:56.481Z,1513276496.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:56.919Z,1513276496.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:57.289Z,1513276497.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:57.701Z,1513276497.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:58.095Z,1513276498.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:58.468Z,1513276498.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:58.872Z,1513276498.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:59.299Z,1513276499.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:34:59.675Z,1513276499.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:00.101Z,1513276500.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:00.511Z,1513276500.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:00.911Z,1513276500.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:01.363Z,1513276501.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:01.673Z,1513276501.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:02.071Z,1513276502.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:02.511Z,1513276502.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:02.905Z,1513276502.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:03.344Z,1513276503.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:03.748Z,1513276503.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:04.101Z,1513276504.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:04.503Z,1513276504.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:04.875Z,1513276504.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:05.272Z,1513276505.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:05.679Z,1513276505.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:06.071Z,1513276506.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:06.504Z,1513276506.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:06.887Z,1513276506.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:07.281Z,1513276507.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:07.675Z,1513276507.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:08.079Z,1513276508.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:08.476Z,1513276508.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:08.877Z,1513276508.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:09.287Z,1513276509.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:09.739Z,1513276509.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:10.091Z,1513276510.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:10.479Z,1513276510.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:10.892Z,1513276510.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:11.275Z,1513276511.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:11.714Z,1513276511.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:12.076Z,1513276512.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:12.488Z,1513276512.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:12.924Z,1513276512.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:13.285Z,1513276513.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:13.681Z,1513276513.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:14.087Z,1513276514.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:14.488Z,1513276514.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:14.879Z,1513276514.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:15.350Z,1513276515.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:15.692Z,1513276515.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:16.124Z,1513276516.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:16.478Z,1513276516.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:16.879Z,1513276516.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:17.289Z,1513276517.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:17.677Z,1513276517.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:18.153Z,1513276518.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:18.488Z,1513276518.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:18.889Z,1513276518.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:19.340Z,1513276519.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:19.681Z,1513276519.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:20.082Z,1513276520.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:20.486Z,1513276520.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:21.003Z,1513276521.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:21.295Z,1513276521.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:21.699Z,1513276521.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:22.104Z,1513276522.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:22.543Z,1513276522.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:22.886Z,1513276522.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:23.335Z,1513276523.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:23.710Z,1513276523.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:24.111Z,1513276524.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:24.519Z,1513276524.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:24.934Z,1513276524.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:25.319Z,1513276525.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:25.715Z,1513276525.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:26.097Z,1513276526.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:26.489Z,1513276526.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:26.872Z,1513276526.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:27.294Z,1513276527.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:27.695Z,1513276527.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:28.094Z,1513276528.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:28.498Z,1513276528.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:28.921Z,1513276528.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:29.279Z,1513276529.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:29.677Z,1513276529.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:30.082Z,1513276530.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:30.482Z,1513276530.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:30.904Z,1513276530.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:31.302Z,1513276531.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:31.680Z,1513276531.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:32.186Z,1513276532.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:32.483Z,1513276532.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:32.880Z,1513276532.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:33.300Z,1513276533.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:33.722Z,1513276533.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:34.088Z,1513276534.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:34.487Z,1513276534.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:34.885Z,1513276534.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:35.290Z,1513276535.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:35.676Z,1513276535.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:36.096Z,1513276536.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:36.494Z,1513276536.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:36.904Z,1513276536.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:37.299Z,1513276537.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:37.695Z,1513276537.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:38.075Z,1513276538.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:38.567Z,1513276538.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:38.872Z,1513276538.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:39.280Z,1513276539.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:39.684Z,1513276539.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:40.107Z,1513276540.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:40.488Z,1513276540.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:40.878Z,1513276540.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:41.277Z,1513276541.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:41.728Z,1513276541.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:42.075Z,1513276542.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:42.489Z,1513276542.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:42.888Z,1513276542.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:43.284Z,1513276543.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:43.678Z,1513276543.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:44.073Z,1513276544.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:44.478Z,1513276544.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:44.924Z,1513276544.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:45.304Z,1513276545.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:45.688Z,1513276545.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:46.134Z,1513276546.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:46.491Z,1513276546.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:46.903Z,1513276546.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:47.280Z,1513276547.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:47.681Z,1513276547.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:48.136Z,1513276548.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:48.503Z,1513276548.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:48.899Z,1513276548.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:49.297Z,1513276549.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:49.696Z,1513276549.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:50.088Z,1513276550.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:50.490Z,1513276550.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:50.871Z,1513276550.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:51.303Z,1513276551.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:51.704Z,1513276551.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:52.101Z,1513276552.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:55.515Z,1513276555.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:55.515Z,1513276555.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 360
2017-12-14T18:35:55.515Z,1513276555.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:35:55.517Z,1513276555.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:55.517Z,1513276555.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 360
2017-12-14T18:35:55.517Z,1513276555.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:35:55.519Z,1513276555.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:55.519Z,1513276555.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 360
2017-12-14T18:35:55.519Z,1513276555.519 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:35:55.531Z,1513276555.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:35:55.532Z,1513276555.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:35:55.532Z,1513276555.532 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:35:55.673Z,1513276555.673 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:35:55.673Z,1513276555.673 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 360
2017-12-14T18:35:55.674Z,1513276555.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:35:55.674Z,1513276555.674 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 360
2017-12-14T18:35:55.674Z,1513276555.674 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:35:55.674Z,1513276555.674 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 360
2017-12-14T18:35:56.046Z,1513276556.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:35:56.046Z,1513276556.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:35:56.046Z,1513276556.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:35:56.047Z,1513276556.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:35:56.047Z,1513276556.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:35:56.048Z,1513276556.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:35:56.048Z,1513276556.048 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:35:56.048Z,1513276556.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:35:56.049Z,1513276556.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:35:56.437Z,1513276556.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:56.832Z,1513276556.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:57.217Z,1513276557.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:57.613Z,1513276557.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:58.035Z,1513276558.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:58.427Z,1513276558.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:58.836Z,1513276558.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:59.235Z,1513276559.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:35:59.623Z,1513276559.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:00.024Z,1513276560.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:00.431Z,1513276560.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:00.875Z,1513276560.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:01.231Z,1513276561.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:01.632Z,1513276561.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:02.032Z,1513276562.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:02.428Z,1513276562.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:02.823Z,1513276562.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:03.230Z,1513276563.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:03.635Z,1513276563.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:04.083Z,1513276564.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:04.402Z,1513276564.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:04.827Z,1513276564.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:05.228Z,1513276565.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:05.639Z,1513276565.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:06.012Z,1513276566.012 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T18:36:06.012Z,1513276566.012 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:36:06.012Z,1513276566.012 [BPC1](ERROR): Data Fault
2017-12-14T18:36:06.059Z,1513276566.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:06.090Z,1513276566.090 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:36:06.432Z,1513276566.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:06.814Z,1513276566.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:07.263Z,1513276567.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:07.303Z,1513276567.303 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:36:07.303Z,1513276567.303 [BPC1] No Fault, FailCount= 1
2017-12-14T18:36:07.687Z,1513276567.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:08.043Z,1513276568.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:08.412Z,1513276568.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:08.816Z,1513276568.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:09.212Z,1513276569.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:09.619Z,1513276569.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:10.016Z,1513276570.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:10.462Z,1513276570.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:10.815Z,1513276570.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:11.221Z,1513276571.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:11.645Z,1513276571.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:12.051Z,1513276572.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:12.419Z,1513276572.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:12.816Z,1513276572.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:13.226Z,1513276573.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:13.683Z,1513276573.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:14.024Z,1513276574.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:14.425Z,1513276574.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:14.820Z,1513276574.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:15.242Z,1513276575.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:15.628Z,1513276575.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:16.065Z,1513276576.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:16.415Z,1513276576.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:16.890Z,1513276576.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:17.223Z,1513276577.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:17.628Z,1513276577.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:18.024Z,1513276578.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:18.419Z,1513276578.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:18.827Z,1513276578.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:19.236Z,1513276579.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:19.632Z,1513276579.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:20.064Z,1513276580.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:20.420Z,1513276580.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:20.828Z,1513276580.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:21.254Z,1513276581.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:21.631Z,1513276581.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:22.047Z,1513276582.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:22.432Z,1513276582.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:22.842Z,1513276582.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:23.269Z,1513276583.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:23.647Z,1513276583.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:24.080Z,1513276584.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:24.451Z,1513276584.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:24.827Z,1513276584.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:25.233Z,1513276585.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:25.638Z,1513276585.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:26.047Z,1513276586.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:26.444Z,1513276586.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:26.900Z,1513276586.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:27.243Z,1513276587.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:27.643Z,1513276587.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:28.087Z,1513276588.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:28.450Z,1513276588.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:28.863Z,1513276588.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:29.223Z,1513276589.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:29.655Z,1513276589.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:30.074Z,1513276590.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:30.470Z,1513276590.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:30.825Z,1513276590.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:31.257Z,1513276591.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:31.631Z,1513276591.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:32.062Z,1513276592.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:32.426Z,1513276592.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:32.863Z,1513276592.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:33.235Z,1513276593.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:33.644Z,1513276593.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:34.067Z,1513276594.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:34.460Z,1513276594.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:34.847Z,1513276594.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:35.227Z,1513276595.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:35.661Z,1513276595.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:36.033Z,1513276596.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:36.432Z,1513276596.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:36.880Z,1513276596.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:37.240Z,1513276597.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:37.623Z,1513276597.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:38.053Z,1513276598.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:38.445Z,1513276598.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:38.848Z,1513276598.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:39.258Z,1513276599.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:39.620Z,1513276599.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:40.055Z,1513276600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:40.451Z,1513276600.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:40.849Z,1513276600.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:41.237Z,1513276601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:41.656Z,1513276601.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:42.062Z,1513276602.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:42.431Z,1513276602.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:42.837Z,1513276602.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:43.278Z,1513276603.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:43.631Z,1513276603.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:44.067Z,1513276604.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:44.431Z,1513276604.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:44.838Z,1513276604.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:45.247Z,1513276605.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:45.648Z,1513276605.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:46.041Z,1513276606.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:46.448Z,1513276606.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:46.866Z,1513276606.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:47.227Z,1513276607.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:47.657Z,1513276607.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:48.032Z,1513276608.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:48.455Z,1513276608.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:48.850Z,1513276608.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:49.240Z,1513276609.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:49.643Z,1513276609.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:50.147Z,1513276610.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:50.464Z,1513276610.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:50.815Z,1513276610.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:51.244Z,1513276611.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:51.615Z,1513276611.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:52.079Z,1513276612.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:52.427Z,1513276612.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:55.961Z,1513276615.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:56.104Z,1513276616.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:56.486Z,1513276616.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:56.844Z,1513276616.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:57.238Z,1513276617.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:57.637Z,1513276617.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:58.039Z,1513276618.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:58.440Z,1513276618.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:58.844Z,1513276618.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:59.273Z,1513276619.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:36:59.682Z,1513276619.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:00.037Z,1513276620.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:00.475Z,1513276620.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:00.842Z,1513276620.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:01.244Z,1513276621.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:01.647Z,1513276621.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:02.051Z,1513276622.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:02.439Z,1513276622.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:02.870Z,1513276622.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:03.249Z,1513276623.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:03.675Z,1513276623.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:04.055Z,1513276624.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:04.449Z,1513276624.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:04.840Z,1513276624.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:05.248Z,1513276625.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:05.652Z,1513276625.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:06.098Z,1513276626.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:06.459Z,1513276626.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:06.843Z,1513276626.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:07.239Z,1513276627.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:07.641Z,1513276627.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:08.052Z,1513276628.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:08.457Z,1513276628.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:08.863Z,1513276628.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:09.295Z,1513276629.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:09.645Z,1513276629.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:10.045Z,1513276630.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:10.451Z,1513276630.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:10.846Z,1513276630.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:11.271Z,1513276631.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:11.657Z,1513276631.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:12.059Z,1513276632.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:12.571Z,1513276632.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:12.859Z,1513276632.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:13.259Z,1513276633.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:13.683Z,1513276633.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:14.059Z,1513276634.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:14.474Z,1513276634.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:14.834Z,1513276634.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:15.258Z,1513276635.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:15.687Z,1513276635.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:16.067Z,1513276636.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:16.439Z,1513276636.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:16.839Z,1513276636.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:17.267Z,1513276637.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:17.669Z,1513276637.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:18.066Z,1513276638.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:18.435Z,1513276638.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:18.881Z,1513276638.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:19.302Z,1513276639.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:19.649Z,1513276639.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:20.048Z,1513276640.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:20.442Z,1513276640.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:20.843Z,1513276640.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:21.248Z,1513276641.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:21.648Z,1513276641.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:22.083Z,1513276642.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:22.453Z,1513276642.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:22.880Z,1513276642.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:23.249Z,1513276643.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:23.656Z,1513276643.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:24.059Z,1513276644.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:24.443Z,1513276644.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:24.847Z,1513276644.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:25.292Z,1513276645.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:25.655Z,1513276645.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:26.056Z,1513276646.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:26.447Z,1513276646.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:26.851Z,1513276646.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:27.259Z,1513276647.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:27.652Z,1513276647.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:28.061Z,1513276648.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:28.490Z,1513276648.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:28.863Z,1513276648.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:29.264Z,1513276649.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:29.663Z,1513276649.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:30.056Z,1513276650.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:30.463Z,1513276650.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:30.844Z,1513276650.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:31.269Z,1513276651.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:31.695Z,1513276651.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:32.040Z,1513276652.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:32.437Z,1513276652.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:32.843Z,1513276652.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:33.294Z,1513276653.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:33.647Z,1513276653.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:34.051Z,1513276654.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:34.447Z,1513276654.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:34.932Z,1513276654.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:35.266Z,1513276655.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:35.649Z,1513276655.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:36.071Z,1513276656.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:36.444Z,1513276656.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:36.875Z,1513276656.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:37.251Z,1513276657.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:37.647Z,1513276657.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:38.086Z,1513276658.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:38.449Z,1513276658.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:38.843Z,1513276658.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:39.255Z,1513276659.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:39.652Z,1513276659.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:40.059Z,1513276660.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:40.443Z,1513276660.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:40.844Z,1513276660.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:41.253Z,1513276661.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:41.652Z,1513276661.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:42.055Z,1513276662.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:42.442Z,1513276662.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:42.839Z,1513276662.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:43.249Z,1513276663.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:43.663Z,1513276663.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:44.050Z,1513276664.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:44.466Z,1513276664.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:44.853Z,1513276664.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:45.297Z,1513276665.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:45.659Z,1513276665.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:46.067Z,1513276666.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:46.450Z,1513276666.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:46.850Z,1513276666.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:47.256Z,1513276667.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:47.707Z,1513276667.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:48.055Z,1513276668.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:48.453Z,1513276668.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:48.852Z,1513276668.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:49.254Z,1513276669.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:49.657Z,1513276669.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:50.050Z,1513276670.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:50.451Z,1513276670.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:50.889Z,1513276670.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:51.247Z,1513276671.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:51.652Z,1513276671.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:52.057Z,1513276672.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:52.455Z,1513276672.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:55.968Z,1513276675.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:56.116Z,1513276676.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:56.483Z,1513276676.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:56.907Z,1513276676.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:57.320Z,1513276677.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:57.679Z,1513276677.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:58.110Z,1513276678.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:58.485Z,1513276678.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:58.923Z,1513276678.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:59.286Z,1513276679.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:37:59.672Z,1513276679.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:00.072Z,1513276680.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:00.509Z,1513276680.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:00.879Z,1513276680.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:01.289Z,1513276681.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:01.684Z,1513276681.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:02.080Z,1513276682.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:02.479Z,1513276682.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:02.884Z,1513276682.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:03.279Z,1513276683.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:03.775Z,1513276683.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:04.079Z,1513276684.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:04.494Z,1513276684.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:04.890Z,1513276684.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:05.287Z,1513276685.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:05.682Z,1513276685.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:06.079Z,1513276686.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:06.485Z,1513276686.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:06.931Z,1513276686.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:07.312Z,1513276687.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:07.690Z,1513276687.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:08.091Z,1513276688.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:08.483Z,1513276688.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:08.869Z,1513276688.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:09.294Z,1513276689.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:09.662Z,1513276689.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:10.139Z,1513276690.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:10.484Z,1513276690.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:10.896Z,1513276690.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:11.290Z,1513276691.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:11.666Z,1513276691.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:12.071Z,1513276692.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:12.515Z,1513276692.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:12.891Z,1513276692.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:13.303Z,1513276693.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:13.696Z,1513276693.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:14.094Z,1513276694.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:14.471Z,1513276694.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:14.871Z,1513276694.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:15.270Z,1513276695.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:15.675Z,1513276695.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:16.071Z,1513276696.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:16.545Z,1513276696.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:16.877Z,1513276696.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:17.272Z,1513276697.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:17.671Z,1513276697.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:18.075Z,1513276698.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:18.476Z,1513276698.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:18.879Z,1513276698.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:19.328Z,1513276699.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:19.707Z,1513276699.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:20.074Z,1513276700.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:20.511Z,1513276700.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:20.869Z,1513276700.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:21.307Z,1513276701.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:21.671Z,1513276701.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:22.069Z,1513276702.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:22.472Z,1513276702.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:22.911Z,1513276702.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:23.283Z,1513276703.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:23.675Z,1513276703.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:24.079Z,1513276704.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:24.477Z,1513276704.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:24.876Z,1513276704.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:25.283Z,1513276705.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:25.680Z,1513276705.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:26.126Z,1513276706.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:26.483Z,1513276706.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:26.872Z,1513276706.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:27.275Z,1513276707.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:27.681Z,1513276707.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:28.079Z,1513276708.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:28.491Z,1513276708.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:28.884Z,1513276708.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:29.366Z,1513276709.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:29.675Z,1513276709.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:30.083Z,1513276710.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:30.474Z,1513276710.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:30.875Z,1513276710.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:31.280Z,1513276711.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:31.684Z,1513276711.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:32.079Z,1513276712.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:32.515Z,1513276712.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:32.880Z,1513276712.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:33.278Z,1513276713.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:33.671Z,1513276713.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:34.094Z,1513276714.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:34.490Z,1513276714.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:34.890Z,1513276714.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:35.291Z,1513276715.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:35.714Z,1513276715.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:36.093Z,1513276716.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:36.492Z,1513276716.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:36.869Z,1513276716.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:37.297Z,1513276717.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:37.701Z,1513276717.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:38.099Z,1513276718.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:38.471Z,1513276718.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:38.955Z,1513276718.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:39.268Z,1513276719.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:39.679Z,1513276719.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:40.073Z,1513276720.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:40.500Z,1513276720.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:40.923Z,1513276720.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:41.382Z,1513276721.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:41.674Z,1513276721.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:42.167Z,1513276722.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:42.473Z,1513276722.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:42.911Z,1513276722.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:43.279Z,1513276723.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:43.683Z,1513276723.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:44.080Z,1513276724.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:44.481Z,1513276724.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:44.873Z,1513276724.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:45.286Z,1513276725.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:45.678Z,1513276725.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:46.078Z,1513276726.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:46.491Z,1513276726.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:46.886Z,1513276726.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:47.280Z,1513276727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:47.679Z,1513276727.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:48.077Z,1513276728.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:48.555Z,1513276728.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:48.880Z,1513276728.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:49.289Z,1513276729.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:49.687Z,1513276729.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:50.085Z,1513276730.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:50.479Z,1513276730.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:50.877Z,1513276730.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:51.295Z,1513276731.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:51.736Z,1513276731.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:52.085Z,1513276732.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:52.488Z,1513276732.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:55.953Z,1513276735.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:56.076Z,1513276736.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:56.076Z,1513276736.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 361
2017-12-14T18:38:56.076Z,1513276736.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:38:56.078Z,1513276736.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:56.079Z,1513276736.079 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 361
2017-12-14T18:38:56.079Z,1513276736.079 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:38:56.080Z,1513276736.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:56.097Z,1513276736.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 361
2017-12-14T18:38:56.097Z,1513276736.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:38:56.121Z,1513276736.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:38:56.121Z,1513276736.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:38:56.122Z,1513276736.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:38:56.480Z,1513276736.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:38:56.480Z,1513276736.480 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 361
2017-12-14T18:38:56.481Z,1513276736.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:38:56.481Z,1513276736.481 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 361
2017-12-14T18:38:56.481Z,1513276736.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:38:56.481Z,1513276736.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 361
2017-12-14T18:38:56.869Z,1513276736.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:38:56.870Z,1513276736.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:38:56.870Z,1513276736.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:38:56.870Z,1513276736.870 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:38:56.871Z,1513276736.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:38:56.871Z,1513276736.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:38:56.872Z,1513276736.872 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:38:56.872Z,1513276736.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:38:56.872Z,1513276736.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:38:57.261Z,1513276737.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:57.658Z,1513276737.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:58.073Z,1513276738.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:58.484Z,1513276738.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:58.881Z,1513276738.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:59.275Z,1513276739.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:38:59.664Z,1513276739.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:00.064Z,1513276740.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:00.474Z,1513276740.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:00.870Z,1513276740.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:01.277Z,1513276741.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:01.672Z,1513276741.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:02.076Z,1513276742.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:02.473Z,1513276742.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:02.874Z,1513276742.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:03.318Z,1513276743.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:03.659Z,1513276743.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:04.058Z,1513276744.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:04.539Z,1513276744.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:04.883Z,1513276744.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:05.295Z,1513276745.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:05.663Z,1513276745.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:06.060Z,1513276746.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:06.459Z,1513276746.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:06.859Z,1513276746.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:07.288Z,1513276747.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:07.714Z,1513276747.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:08.087Z,1513276748.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:08.467Z,1513276748.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:08.867Z,1513276748.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:09.255Z,1513276749.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:09.658Z,1513276749.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:10.059Z,1513276750.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:10.464Z,1513276750.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:10.935Z,1513276750.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:11.287Z,1513276751.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:11.660Z,1513276751.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:12.063Z,1513276752.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:12.462Z,1513276752.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:12.861Z,1513276752.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:13.264Z,1513276753.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:13.704Z,1513276753.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:14.100Z,1513276754.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:14.464Z,1513276754.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:14.864Z,1513276754.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:15.272Z,1513276755.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:15.665Z,1513276755.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:16.063Z,1513276756.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:16.479Z,1513276756.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:16.875Z,1513276756.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:17.313Z,1513276757.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:17.660Z,1513276757.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:18.064Z,1513276758.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:18.471Z,1513276758.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:18.868Z,1513276758.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:19.274Z,1513276759.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:19.672Z,1513276759.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:20.072Z,1513276760.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:20.500Z,1513276760.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:20.870Z,1513276760.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:21.279Z,1513276761.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:21.680Z,1513276761.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:22.081Z,1513276762.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:22.483Z,1513276762.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:22.891Z,1513276762.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:23.280Z,1513276763.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:23.679Z,1513276763.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:24.130Z,1513276764.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:24.481Z,1513276764.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:24.862Z,1513276764.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:25.292Z,1513276765.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:25.714Z,1513276765.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:26.108Z,1513276766.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:26.463Z,1513276766.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:26.859Z,1513276766.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:27.307Z,1513276767.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:27.655Z,1513276767.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:28.084Z,1513276768.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:28.460Z,1513276768.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:28.884Z,1513276768.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:29.290Z,1513276769.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:29.659Z,1513276769.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:30.064Z,1513276770.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:30.492Z,1513276770.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:30.519Z,1513276770.519 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:39:30.857Z,1513276770.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:31.277Z,1513276771.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:31.676Z,1513276771.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:32.079Z,1513276772.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:32.458Z,1513276772.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:32.858Z,1513276772.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:33.266Z,1513276773.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:33.734Z,1513276773.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:34.071Z,1513276774.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:34.470Z,1513276774.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:34.879Z,1513276774.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:35.272Z,1513276775.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:35.664Z,1513276775.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:36.077Z,1513276776.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:36.508Z,1513276776.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:36.910Z,1513276776.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:37.268Z,1513276777.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:37.671Z,1513276777.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:38.070Z,1513276778.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:38.465Z,1513276778.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:38.875Z,1513276778.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:39.279Z,1513276779.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:39.671Z,1513276779.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:40.159Z,1513276780.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:40.465Z,1513276780.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:40.869Z,1513276780.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:41.271Z,1513276781.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:41.670Z,1513276781.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:42.067Z,1513276782.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:42.470Z,1513276782.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:42.875Z,1513276782.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:43.318Z,1513276783.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:43.660Z,1513276783.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:44.057Z,1513276784.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:44.460Z,1513276784.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:44.871Z,1513276784.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:45.269Z,1513276785.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:45.675Z,1513276785.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:46.069Z,1513276786.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:46.506Z,1513276786.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:46.863Z,1513276786.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:47.309Z,1513276787.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:47.668Z,1513276787.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:48.067Z,1513276788.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:48.542Z,1513276788.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:48.873Z,1513276788.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:49.279Z,1513276789.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:49.731Z,1513276789.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:50.066Z,1513276790.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:50.483Z,1513276790.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:50.875Z,1513276790.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:51.283Z,1513276791.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:51.672Z,1513276791.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:52.120Z,1513276792.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:52.124Z,1513276792.124 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T18:39:52.124Z,1513276792.124 [Default:CheckIn:C.Wait] Stopped
2017-12-14T18:39:52.124Z,1513276792.124 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T18:39:52.124Z,1513276792.124 [Default:CheckIn:D] Running Loop=1
2017-12-14T18:39:52.470Z,1513276792.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:52.478Z,1513276792.478 [Default:CheckIn:D] Stopped
2017-12-14T18:39:52.478Z,1513276792.478 [Default:CheckIn:E] Running Loop=1
2017-12-14T18:39:52.903Z,1513276792.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:52.922Z,1513276792.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1086.618099 min 
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn:E] Stopped
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn] Stopped
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn](INFO): Running loop #105
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn] Running Loop=105
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T18:39:52.923Z,1513276792.923 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T18:39:56.356Z,1513276796.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:56.492Z,1513276796.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:56.860Z,1513276796.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:57.271Z,1513276797.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:57.665Z,1513276797.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:58.054Z,1513276798.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:58.464Z,1513276798.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:58.875Z,1513276798.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:59.323Z,1513276799.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:39:59.669Z,1513276799.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:00.065Z,1513276800.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:00.462Z,1513276800.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:00.859Z,1513276800.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:01.264Z,1513276801.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:01.673Z,1513276801.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:02.065Z,1513276802.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:02.510Z,1513276802.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:02.840Z,1513276802.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:03.267Z,1513276803.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:03.668Z,1513276803.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:04.063Z,1513276804.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:04.463Z,1513276804.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:04.855Z,1513276804.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:05.285Z,1513276805.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:05.746Z,1513276805.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:06.059Z,1513276806.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:06.456Z,1513276806.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:06.853Z,1513276806.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:07.263Z,1513276807.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:07.667Z,1513276807.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:08.064Z,1513276808.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:08.456Z,1513276808.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:08.885Z,1513276808.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:09.264Z,1513276809.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:09.665Z,1513276809.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:10.060Z,1513276810.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:10.514Z,1513276810.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:10.880Z,1513276810.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:11.260Z,1513276811.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:11.698Z,1513276811.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:12.112Z,1513276812.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:12.503Z,1513276812.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:12.867Z,1513276812.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:13.259Z,1513276813.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:13.661Z,1513276813.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:14.061Z,1513276814.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:14.416Z,1513276814.416 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T18:40:14.416Z,1513276814.416 [NAL9602] Data Fault, FailCount= 4
2017-12-14T18:40:14.416Z,1513276814.416 [NAL9602](ERROR): Data Fault
2017-12-14T18:40:14.473Z,1513276814.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:14.498Z,1513276814.498 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T18:40:14.815Z,1513276814.815 [NAL9602](INFO): Powering down
2017-12-14T18:40:14.870Z,1513276814.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:15.243Z,1513276815.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:15.485Z,1513276815.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:15.657Z,1513276815.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:15.683Z,1513276815.683 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T18:40:15.683Z,1513276815.683 [NAL9602] No Fault, FailCount= 4
2017-12-14T18:40:16.050Z,1513276816.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:16.281Z,1513276816.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:16.450Z,1513276816.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:16.685Z,1513276816.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:16.846Z,1513276816.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:17.248Z,1513276817.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:17.482Z,1513276817.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:17.648Z,1513276817.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:18.051Z,1513276818.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:18.277Z,1513276818.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:18.492Z,1513276818.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:18.681Z,1513276818.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:18.856Z,1513276818.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:19.255Z,1513276819.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:19.477Z,1513276819.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:19.658Z,1513276819.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:20.051Z,1513276820.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:20.273Z,1513276820.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:20.456Z,1513276820.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:20.677Z,1513276820.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:20.897Z,1513276820.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:21.254Z,1513276821.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:21.473Z,1513276821.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:21.721Z,1513276821.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:22.063Z,1513276822.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:22.269Z,1513276822.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:22.458Z,1513276822.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:22.673Z,1513276822.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:22.861Z,1513276822.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:23.262Z,1513276823.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:23.663Z,1513276823.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:24.057Z,1513276824.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:24.459Z,1513276824.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:24.882Z,1513276824.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:25.272Z,1513276825.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:25.650Z,1513276825.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:26.050Z,1513276826.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:26.452Z,1513276826.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:26.847Z,1513276826.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:27.252Z,1513276827.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:27.651Z,1513276827.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:28.108Z,1513276828.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:28.451Z,1513276828.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:28.850Z,1513276828.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:29.252Z,1513276829.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:29.490Z,1513276829.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:29.650Z,1513276829.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:30.052Z,1513276830.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:30.285Z,1513276830.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:30.456Z,1513276830.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:30.689Z,1513276830.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:30.852Z,1513276830.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:31.261Z,1513276831.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:31.485Z,1513276831.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:31.651Z,1513276831.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:32.051Z,1513276832.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:32.281Z,1513276832.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:32.460Z,1513276832.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:32.685Z,1513276832.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:32.871Z,1513276832.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:33.288Z,1513276833.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:33.484Z,1513276833.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:33.654Z,1513276833.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:34.059Z,1513276834.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:34.277Z,1513276834.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:34.523Z,1513276834.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:34.681Z,1513276834.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:34.862Z,1513276834.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:35.271Z,1513276835.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:35.477Z,1513276835.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:35.659Z,1513276835.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:36.056Z,1513276836.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:36.273Z,1513276836.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:36.460Z,1513276836.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:36.677Z,1513276836.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:36.859Z,1513276836.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:37.255Z,1513276837.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:37.473Z,1513276837.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:37.708Z,1513276837.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:38.058Z,1513276838.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:38.270Z,1513276838.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:38.456Z,1513276838.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:38.673Z,1513276838.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:38.857Z,1513276838.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:39.256Z,1513276839.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:39.470Z,1513276839.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:39.656Z,1513276839.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:40.060Z,1513276840.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:40.266Z,1513276840.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:40.462Z,1513276840.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:40.673Z,1513276840.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:40.911Z,1513276840.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:41.261Z,1513276841.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:41.469Z,1513276841.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:41.663Z,1513276841.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:42.039Z,1513276842.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:42.266Z,1513276842.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:42.464Z,1513276842.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:42.673Z,1513276842.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:42.844Z,1513276842.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:43.261Z,1513276843.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:43.469Z,1513276843.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:43.680Z,1513276843.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:44.125Z,1513276844.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:44.265Z,1513276844.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:44.467Z,1513276844.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:44.669Z,1513276844.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:44.846Z,1513276844.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:45.214Z,1513276845.214 [NAL9602](INFO): Powering up NAL9602
2017-12-14T18:40:45.246Z,1513276845.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:45.466Z,1513276845.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:45.645Z,1513276845.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:46.069Z,1513276846.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:46.261Z,1513276846.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:46.451Z,1513276846.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:46.666Z,1513276846.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:46.850Z,1513276846.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:47.331Z,1513276847.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:47.461Z,1513276847.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:47.645Z,1513276847.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:48.074Z,1513276848.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:48.257Z,1513276848.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:48.452Z,1513276848.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:48.661Z,1513276848.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:48.849Z,1513276848.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:49.251Z,1513276849.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:49.457Z,1513276849.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:49.650Z,1513276849.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:50.055Z,1513276850.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:50.254Z,1513276850.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:50.482Z,1513276850.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:50.657Z,1513276850.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:50.851Z,1513276850.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:51.249Z,1513276851.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:51.454Z,1513276851.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:51.655Z,1513276851.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:52.048Z,1513276852.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:52.249Z,1513276852.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:52.452Z,1513276852.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:52.653Z,1513276852.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:52.854Z,1513276852.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:53.254Z,1513276853.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:53.450Z,1513276853.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:54.247Z,1513276854.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:54.705Z,1513276854.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:55.501Z,1513276855.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:56.298Z,1513276856.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:56.701Z,1513276856.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:56.912Z,1513276856.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:57.048Z,1513276857.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:57.362Z,1513276857.362 [NAL9602](INFO): NAL9602 initialized
2017-12-14T18:40:57.442Z,1513276857.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:57.498Z,1513276857.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:57.815Z,1513276857.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:58.254Z,1513276858.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:58.306Z,1513276858.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:58.616Z,1513276858.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:58.709Z,1513276858.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:59.020Z,1513276859.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:59.414Z,1513276859.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:40:59.506Z,1513276859.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:40:59.815Z,1513276859.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:00.205Z,1513276860.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:00.301Z,1513276860.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:00.605Z,1513276860.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:00.705Z,1513276860.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:01.008Z,1513276861.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:01.411Z,1513276861.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:01.501Z,1513276861.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:01.800Z,1513276861.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:02.207Z,1513276862.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:02.297Z,1513276862.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:02.605Z,1513276862.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:02.701Z,1513276862.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:03.011Z,1513276863.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:03.407Z,1513276863.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:03.498Z,1513276863.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:03.809Z,1513276863.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:04.219Z,1513276864.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:04.295Z,1513276864.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:04.621Z,1513276864.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:04.697Z,1513276864.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:05.013Z,1513276865.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:05.405Z,1513276865.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:05.494Z,1513276865.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:05.819Z,1513276865.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:06.268Z,1513276866.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:06.290Z,1513276866.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:06.672Z,1513276866.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:06.693Z,1513276866.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:07.004Z,1513276867.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:07.431Z,1513276867.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:07.489Z,1513276867.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:07.805Z,1513276867.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:08.224Z,1513276868.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:08.285Z,1513276868.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:08.604Z,1513276868.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:08.713Z,1513276868.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:09.004Z,1513276869.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:09.398Z,1513276869.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:09.510Z,1513276869.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:09.824Z,1513276869.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:10.280Z,1513276870.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:10.306Z,1513276870.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:10.623Z,1513276870.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:10.717Z,1513276870.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:11.011Z,1513276871.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:11.405Z,1513276871.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:11.514Z,1513276871.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:11.814Z,1513276871.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:12.228Z,1513276872.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:12.310Z,1513276872.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:12.675Z,1513276872.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:12.713Z,1513276872.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:13.028Z,1513276873.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:13.424Z,1513276873.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:13.510Z,1513276873.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:13.800Z,1513276873.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:14.205Z,1513276874.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:14.305Z,1513276874.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:14.631Z,1513276874.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:14.709Z,1513276874.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:15.003Z,1513276875.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:15.403Z,1513276875.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:15.506Z,1513276875.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:15.839Z,1513276875.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:16.218Z,1513276876.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:16.301Z,1513276876.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:16.622Z,1513276876.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:16.705Z,1513276876.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:17.015Z,1513276877.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:17.409Z,1513276877.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:17.503Z,1513276877.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:17.815Z,1513276877.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:18.238Z,1513276878.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:18.297Z,1513276878.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:18.699Z,1513276878.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:18.701Z,1513276878.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:19.026Z,1513276879.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:19.435Z,1513276879.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:19.498Z,1513276879.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:19.839Z,1513276879.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:20.206Z,1513276880.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:20.294Z,1513276880.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:20.679Z,1513276880.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:20.698Z,1513276880.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:21.011Z,1513276881.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:21.408Z,1513276881.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:21.498Z,1513276881.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:21.824Z,1513276881.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:22.294Z,1513276882.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:22.346Z,1513276882.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:22.624Z,1513276882.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:22.786Z,1513276882.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:23.036Z,1513276883.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:23.436Z,1513276883.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:23.582Z,1513276883.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:23.839Z,1513276883.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:24.306Z,1513276884.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:24.378Z,1513276884.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:24.651Z,1513276884.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:24.782Z,1513276884.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:25.052Z,1513276885.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:25.427Z,1513276885.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:25.578Z,1513276885.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:25.819Z,1513276885.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:26.217Z,1513276886.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:26.380Z,1513276886.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:26.611Z,1513276886.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:26.786Z,1513276886.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:27.058Z,1513276887.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:27.408Z,1513276887.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:27.583Z,1513276887.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:27.851Z,1513276887.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:28.247Z,1513276888.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:28.381Z,1513276888.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:28.624Z,1513276888.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:28.786Z,1513276888.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:29.027Z,1513276889.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:29.408Z,1513276889.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:29.582Z,1513276889.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:29.842Z,1513276889.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:30.233Z,1513276890.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:30.377Z,1513276890.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:30.636Z,1513276890.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:30.781Z,1513276890.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:31.043Z,1513276891.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:31.444Z,1513276891.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:31.578Z,1513276891.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:31.844Z,1513276891.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:32.230Z,1513276892.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:32.374Z,1513276892.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:32.664Z,1513276892.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:32.779Z,1513276892.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:33.003Z,1513276893.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:33.415Z,1513276893.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:33.574Z,1513276893.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:33.849Z,1513276893.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:34.231Z,1513276894.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:34.371Z,1513276894.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:34.619Z,1513276894.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:34.782Z,1513276894.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:35.019Z,1513276895.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:35.424Z,1513276895.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:35.807Z,1513276895.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:36.263Z,1513276896.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:36.658Z,1513276896.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:37.031Z,1513276897.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:37.454Z,1513276897.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:37.576Z,1513276897.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:37.825Z,1513276897.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:38.279Z,1513276898.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:38.374Z,1513276898.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:38.628Z,1513276898.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:38.778Z,1513276898.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:39.031Z,1513276899.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:39.402Z,1513276899.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:39.574Z,1513276899.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:39.823Z,1513276899.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:40.224Z,1513276900.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:40.351Z,1513276900.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:40.616Z,1513276900.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:41.054Z,1513276901.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:41.146Z,1513276901.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:41.406Z,1513276901.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:41.807Z,1513276901.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:41.943Z,1513276901.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:42.199Z,1513276902.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:42.353Z,1513276902.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:42.615Z,1513276902.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:43.015Z,1513276903.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:43.150Z,1513276903.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:43.408Z,1513276903.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:43.799Z,1513276903.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:43.946Z,1513276903.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:44.194Z,1513276904.194 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:41:44.194Z,1513276904.194 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:41:44.195Z,1513276904.195 [BPC1](ERROR): Communications Fault
2017-12-14T18:41:44.207Z,1513276904.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:44.221Z,1513276904.221 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:41:44.349Z,1513276904.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:44.597Z,1513276904.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:45.064Z,1513276905.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:45.149Z,1513276905.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:45.403Z,1513276905.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:45.416Z,1513276905.416 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:41:45.416Z,1513276905.416 [BPC1] No Fault, FailCount= 1
2017-12-14T18:41:45.851Z,1513276905.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:45.946Z,1513276905.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:46.209Z,1513276906.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:46.350Z,1513276906.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:46.608Z,1513276906.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:46.990Z,1513276906.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:47.399Z,1513276907.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:47.792Z,1513276907.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:48.199Z,1513276908.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:48.717Z,1513276908.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:49.035Z,1513276909.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:49.182Z,1513276909.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:49.423Z,1513276909.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:49.831Z,1513276909.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:49.978Z,1513276909.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:50.314Z,1513276910.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:50.611Z,1513276910.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:50.746Z,1513276910.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:51.048Z,1513276911.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:51.395Z,1513276911.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:51.548Z,1513276911.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:51.835Z,1513276911.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:52.302Z,1513276912.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:52.346Z,1513276912.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:52.635Z,1513276912.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:52.751Z,1513276912.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:53.032Z,1513276913.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:53.446Z,1513276913.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:41:53.546Z,1513276913.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:54.342Z,1513276914.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:55.138Z,1513276915.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:55.934Z,1513276915.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:56.338Z,1513276916.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:56.742Z,1513276916.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:57.538Z,1513276917.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:58.334Z,1513276918.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:58.738Z,1513276918.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:41:59.534Z,1513276919.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:00.311Z,1513276920.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:00.311Z,1513276920.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 362
2017-12-14T18:42:00.311Z,1513276920.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:42:00.318Z,1513276920.318 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:00.318Z,1513276920.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 362
2017-12-14T18:42:00.318Z,1513276920.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:42:00.320Z,1513276920.320 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:00.320Z,1513276920.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 362
2017-12-14T18:42:00.320Z,1513276920.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:42:00.330Z,1513276920.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:00.353Z,1513276920.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:42:00.353Z,1513276920.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:42:00.354Z,1513276920.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:42:00.461Z,1513276920.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:42:00.461Z,1513276920.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 362
2017-12-14T18:42:00.462Z,1513276920.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:42:00.462Z,1513276920.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 362
2017-12-14T18:42:00.462Z,1513276920.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:42:00.462Z,1513276920.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 362
2017-12-14T18:42:00.734Z,1513276920.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:00.822Z,1513276920.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:42:00.822Z,1513276920.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:42:00.823Z,1513276920.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:42:00.823Z,1513276920.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:42:00.823Z,1513276920.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:42:00.824Z,1513276920.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:42:00.824Z,1513276920.824 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:42:00.829Z,1513276920.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:42:00.829Z,1513276920.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:42:01.231Z,1513276921.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:01.530Z,1513276921.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:01.643Z,1513276921.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:02.086Z,1513276922.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:02.326Z,1513276922.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:02.411Z,1513276922.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:02.729Z,1513276922.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:02.823Z,1513276922.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:03.243Z,1513276923.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:03.526Z,1513276923.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:03.643Z,1513276923.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:04.023Z,1513276924.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:04.321Z,1513276924.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:04.415Z,1513276924.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:04.725Z,1513276924.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:04.817Z,1513276924.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:05.215Z,1513276925.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:05.522Z,1513276925.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:05.611Z,1513276925.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:06.020Z,1513276926.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:06.317Z,1513276926.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:06.429Z,1513276926.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:06.721Z,1513276926.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:06.831Z,1513276926.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:07.224Z,1513276927.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:07.517Z,1513276927.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:07.679Z,1513276927.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:08.059Z,1513276928.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:08.313Z,1513276928.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:08.417Z,1513276928.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:08.717Z,1513276928.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:08.821Z,1513276928.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:09.216Z,1513276929.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:09.513Z,1513276929.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:09.632Z,1513276929.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:10.024Z,1513276930.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:10.309Z,1513276930.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:10.472Z,1513276930.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:10.713Z,1513276930.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:10.821Z,1513276930.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:11.264Z,1513276931.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:11.510Z,1513276931.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:11.615Z,1513276931.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:12.013Z,1513276932.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:12.306Z,1513276932.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:12.435Z,1513276932.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:12.709Z,1513276932.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:12.835Z,1513276932.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:13.274Z,1513276933.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:13.506Z,1513276933.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:13.628Z,1513276933.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:14.007Z,1513276934.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:14.301Z,1513276934.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:14.415Z,1513276934.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:14.705Z,1513276934.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:14.807Z,1513276934.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:15.203Z,1513276935.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:15.502Z,1513276935.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:15.616Z,1513276935.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:16.030Z,1513276936.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:16.297Z,1513276936.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:16.434Z,1513276936.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:16.702Z,1513276936.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:16.824Z,1513276936.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:17.213Z,1513276937.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:17.497Z,1513276937.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:17.646Z,1513276937.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:18.026Z,1513276938.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:18.294Z,1513276938.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:18.534Z,1513276938.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:18.697Z,1513276938.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:18.847Z,1513276938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:19.246Z,1513276939.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:19.493Z,1513276939.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:19.642Z,1513276939.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:20.015Z,1513276940.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:20.290Z,1513276940.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:20.429Z,1513276940.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:20.693Z,1513276940.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:20.855Z,1513276940.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:21.215Z,1513276941.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:21.489Z,1513276941.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:21.662Z,1513276941.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:22.020Z,1513276942.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:22.285Z,1513276942.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:22.428Z,1513276942.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:22.689Z,1513276942.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:22.816Z,1513276942.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:23.219Z,1513276943.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:23.485Z,1513276943.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:23.619Z,1513276943.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:24.040Z,1513276944.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:24.281Z,1513276944.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:24.423Z,1513276944.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:24.685Z,1513276944.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:24.829Z,1513276944.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:25.231Z,1513276945.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:25.481Z,1513276945.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:25.635Z,1513276945.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:26.002Z,1513276946.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:26.277Z,1513276946.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:26.428Z,1513276946.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:26.681Z,1513276946.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:26.807Z,1513276946.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:27.284Z,1513276947.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:27.477Z,1513276947.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:27.639Z,1513276947.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:28.032Z,1513276948.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:28.273Z,1513276948.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:28.424Z,1513276948.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:28.677Z,1513276948.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:28.836Z,1513276948.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:29.211Z,1513276949.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:29.473Z,1513276949.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:29.609Z,1513276949.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:30.044Z,1513276950.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:30.272Z,1513276950.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:30.451Z,1513276950.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:30.677Z,1513276950.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:30.835Z,1513276950.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:31.235Z,1513276951.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:31.474Z,1513276951.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:31.630Z,1513276951.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:32.043Z,1513276952.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:32.270Z,1513276952.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:32.419Z,1513276952.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:32.677Z,1513276952.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:32.819Z,1513276952.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:33.218Z,1513276953.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:33.474Z,1513276953.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:33.683Z,1513276953.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:34.025Z,1513276954.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:34.270Z,1513276954.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:34.475Z,1513276954.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:34.677Z,1513276954.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:34.825Z,1513276954.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:35.243Z,1513276955.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:35.473Z,1513276955.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:35.687Z,1513276955.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:36.015Z,1513276956.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:36.271Z,1513276956.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:36.419Z,1513276956.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:36.677Z,1513276956.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:36.865Z,1513276956.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:37.232Z,1513276957.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:37.474Z,1513276957.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:37.624Z,1513276957.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:38.016Z,1513276958.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:38.269Z,1513276958.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:38.420Z,1513276958.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:38.673Z,1513276958.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:38.817Z,1513276958.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:39.218Z,1513276959.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:39.470Z,1513276959.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:39.620Z,1513276959.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:40.068Z,1513276960.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:40.266Z,1513276960.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:40.433Z,1513276960.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:40.669Z,1513276960.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:40.825Z,1513276960.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:41.222Z,1513276961.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:41.465Z,1513276961.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:41.622Z,1513276961.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:42.022Z,1513276962.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:42.261Z,1513276962.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:42.420Z,1513276962.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:42.665Z,1513276962.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:42.832Z,1513276962.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:43.295Z,1513276963.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:43.461Z,1513276963.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:43.636Z,1513276963.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:44.043Z,1513276964.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:44.258Z,1513276964.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:44.412Z,1513276964.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:44.661Z,1513276964.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:44.819Z,1513276964.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:45.211Z,1513276965.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:45.458Z,1513276965.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:45.641Z,1513276965.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:46.015Z,1513276966.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:46.255Z,1513276966.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:46.494Z,1513276966.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:46.681Z,1513276966.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:46.823Z,1513276966.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:47.217Z,1513276967.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:47.478Z,1513276967.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:47.615Z,1513276967.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:48.020Z,1513276968.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:48.274Z,1513276968.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:48.419Z,1513276968.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:48.677Z,1513276968.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:48.821Z,1513276968.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:49.221Z,1513276969.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:49.473Z,1513276969.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:49.666Z,1513276969.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:50.018Z,1513276970.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:50.269Z,1513276970.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:50.422Z,1513276970.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:50.673Z,1513276970.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:50.818Z,1513276970.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:51.212Z,1513276971.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:51.470Z,1513276971.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:51.635Z,1513276971.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:52.039Z,1513276972.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:52.267Z,1513276972.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:52.443Z,1513276972.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:52.669Z,1513276972.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:52.853Z,1513276972.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:53.233Z,1513276973.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:53.465Z,1513276973.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:53.612Z,1513276973.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:54.261Z,1513276974.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:54.665Z,1513276974.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:55.461Z,1513276975.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:56.257Z,1513276976.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:56.661Z,1513276976.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:57.106Z,1513276977.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:57.229Z,1513276977.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:57.457Z,1513276977.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:57.617Z,1513276977.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:58.067Z,1513276978.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:58.253Z,1513276978.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:58.407Z,1513276978.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:58.657Z,1513276978.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:58.819Z,1513276978.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:59.235Z,1513276979.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:42:59.453Z,1513276979.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:42:59.591Z,1513276979.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:00.001Z,1513276980.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:00.251Z,1513276980.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:00.395Z,1513276980.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:00.681Z,1513276980.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:00.807Z,1513276980.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:01.211Z,1513276981.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:01.477Z,1513276981.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:01.602Z,1513276981.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:01.992Z,1513276981.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:02.274Z,1513276982.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:02.431Z,1513276982.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:02.677Z,1513276982.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:02.796Z,1513276982.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:03.190Z,1513276983.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:03.473Z,1513276983.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:03.602Z,1513276983.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:04.009Z,1513276984.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:04.269Z,1513276984.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:04.411Z,1513276984.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:04.673Z,1513276984.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:04.796Z,1513276984.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:05.191Z,1513276985.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:05.471Z,1513276985.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:05.636Z,1513276985.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:06.001Z,1513276986.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:06.265Z,1513276986.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:06.403Z,1513276986.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:06.669Z,1513276986.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:06.802Z,1513276986.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:07.235Z,1513276987.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:07.465Z,1513276987.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:07.603Z,1513276987.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:08.001Z,1513276988.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:08.261Z,1513276988.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:08.407Z,1513276988.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:08.665Z,1513276988.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:08.833Z,1513276988.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:09.203Z,1513276989.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:09.461Z,1513276989.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:09.601Z,1513276989.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:10.007Z,1513276990.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:10.257Z,1513276990.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:10.415Z,1513276990.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:10.661Z,1513276990.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:10.783Z,1513276990.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:11.183Z,1513276991.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:11.457Z,1513276991.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:11.601Z,1513276991.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:12.099Z,1513276992.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:12.253Z,1513276992.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:12.397Z,1513276992.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:12.657Z,1513276992.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:12.800Z,1513276992.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:13.207Z,1513276993.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:13.454Z,1513276993.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:13.611Z,1513276993.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:13.992Z,1513276993.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:14.252Z,1513276994.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:14.397Z,1513276994.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:14.681Z,1513276994.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:14.792Z,1513276994.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:15.213Z,1513276995.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:15.477Z,1513276995.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:15.607Z,1513276995.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:16.006Z,1513276996.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:16.274Z,1513276996.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:16.407Z,1513276996.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:16.685Z,1513276996.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:16.794Z,1513276996.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:17.193Z,1513276997.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:17.482Z,1513276997.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:17.603Z,1513276997.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:18.051Z,1513276998.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:18.277Z,1513276998.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:18.415Z,1513276998.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:18.684Z,1513276998.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:18.806Z,1513276998.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:19.224Z,1513276999.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:19.478Z,1513276999.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:19.609Z,1513276999.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:20.017Z,1513277000.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:20.273Z,1513277000.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:20.427Z,1513277000.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:20.677Z,1513277000.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:20.803Z,1513277000.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:21.223Z,1513277001.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:21.473Z,1513277001.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:21.618Z,1513277001.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:22.011Z,1513277002.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:22.269Z,1513277002.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:22.412Z,1513277002.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:22.673Z,1513277002.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:22.786Z,1513277002.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:23.192Z,1513277003.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:23.469Z,1513277003.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:23.588Z,1513277003.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:24.009Z,1513277004.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:24.265Z,1513277004.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:24.396Z,1513277004.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:24.669Z,1513277004.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:24.839Z,1513277004.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:25.220Z,1513277005.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:25.466Z,1513277005.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:25.601Z,1513277005.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:26.039Z,1513277006.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:26.264Z,1513277006.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:26.405Z,1513277006.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:26.669Z,1513277006.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:26.794Z,1513277006.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:27.191Z,1513277007.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:27.465Z,1513277007.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:27.602Z,1513277007.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:28.024Z,1513277008.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:28.266Z,1513277008.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:28.406Z,1513277008.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:28.677Z,1513277008.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:28.798Z,1513277008.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:29.204Z,1513277009.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:29.474Z,1513277009.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:29.641Z,1513277009.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:30.004Z,1513277010.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-14T18:43:30.045Z,1513277010.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:30.270Z,1513277010.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:30.410Z,1513277010.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:30.685Z,1513277010.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:30.807Z,1513277010.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:31.262Z,1513277011.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:31.482Z,1513277011.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:31.606Z,1513277011.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:32.005Z,1513277012.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:32.277Z,1513277012.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:32.397Z,1513277012.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:32.681Z,1513277012.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:32.793Z,1513277012.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:33.189Z,1513277013.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:33.478Z,1513277013.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:33.609Z,1513277013.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:34.015Z,1513277014.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:34.274Z,1513277014.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:34.444Z,1513277014.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:34.678Z,1513277014.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:34.795Z,1513277014.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:35.202Z,1513277015.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:35.474Z,1513277015.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:35.595Z,1513277015.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:36.003Z,1513277016.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:36.269Z,1513277016.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:36.403Z,1513277016.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:36.673Z,1513277016.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T18:43:36.832Z,1513277016.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:37.207Z,1513277017.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:37.647Z,1513277017.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:37.992Z,1513277017.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:38.399Z,1513277018.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:38.791Z,1513277018.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:39.194Z,1513277019.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:39.601Z,1513277019.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:40.084Z,1513277020.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:40.423Z,1513277020.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:40.822Z,1513277020.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:41.202Z,1513277021.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:41.599Z,1513277021.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:42.047Z,1513277022.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:42.399Z,1513277022.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:42.835Z,1513277022.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:43.207Z,1513277023.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:43.631Z,1513277023.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:44.012Z,1513277024.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:44.407Z,1513277024.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:44.791Z,1513277024.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:45.188Z,1513277025.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:45.614Z,1513277025.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:46.053Z,1513277026.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:46.402Z,1513277026.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:46.792Z,1513277026.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:47.235Z,1513277027.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:47.598Z,1513277027.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:48.003Z,1513277028.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:48.398Z,1513277028.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:48.810Z,1513277028.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:49.206Z,1513277029.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:49.607Z,1513277029.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:49.997Z,1513277029.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:50.407Z,1513277030.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:50.800Z,1513277030.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:51.201Z,1513277031.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:51.611Z,1513277031.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:52.050Z,1513277032.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:52.413Z,1513277032.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:52.802Z,1513277032.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:53.207Z,1513277033.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:53.652Z,1513277033.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:54.058Z,1513277034.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:57.561Z,1513277037.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:57.680Z,1513277037.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:58.066Z,1513277038.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:58.472Z,1513277038.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:58.863Z,1513277038.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:59.238Z,1513277039.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:43:59.639Z,1513277039.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:00.075Z,1513277040.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:00.435Z,1513277040.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:00.866Z,1513277040.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:01.248Z,1513277041.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:01.644Z,1513277041.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:02.040Z,1513277042.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:02.444Z,1513277042.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:02.886Z,1513277042.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:03.286Z,1513277043.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:03.703Z,1513277043.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:04.055Z,1513277044.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:04.491Z,1513277044.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:04.847Z,1513277044.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:05.270Z,1513277045.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:05.644Z,1513277045.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:06.044Z,1513277046.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:06.456Z,1513277046.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:06.858Z,1513277046.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:07.248Z,1513277047.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:07.658Z,1513277047.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:08.062Z,1513277048.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:08.450Z,1513277048.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:08.831Z,1513277048.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:09.248Z,1513277049.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:09.686Z,1513277049.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:10.059Z,1513277050.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:10.453Z,1513277050.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:10.843Z,1513277050.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:11.244Z,1513277051.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:11.650Z,1513277051.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:12.043Z,1513277052.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:12.447Z,1513277052.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:12.885Z,1513277052.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:13.257Z,1513277053.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:13.676Z,1513277053.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:14.050Z,1513277054.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:14.442Z,1513277054.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:14.831Z,1513277054.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:15.258Z,1513277055.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:15.657Z,1513277055.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:16.159Z,1513277056.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:16.457Z,1513277056.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:16.854Z,1513277056.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:17.241Z,1513277057.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:17.641Z,1513277057.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:18.068Z,1513277058.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:18.442Z,1513277058.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:18.852Z,1513277058.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:19.296Z,1513277059.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:19.655Z,1513277059.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:20.047Z,1513277060.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:20.444Z,1513277060.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:20.844Z,1513277060.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:21.244Z,1513277061.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:21.656Z,1513277061.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:22.052Z,1513277062.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:22.504Z,1513277062.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:22.847Z,1513277062.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:23.247Z,1513277063.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:23.644Z,1513277063.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:24.039Z,1513277064.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:24.438Z,1513277064.438 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T18:44:24.439Z,1513277064.439 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:44:24.439Z,1513277064.439 [BPC1](ERROR): Data Fault
2017-12-14T18:44:24.447Z,1513277064.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:24.460Z,1513277064.460 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:44:24.865Z,1513277064.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:25.259Z,1513277065.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:25.696Z,1513277065.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:25.727Z,1513277065.727 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:44:25.727Z,1513277065.727 [BPC1] No Fault, FailCount= 1
2017-12-14T18:44:26.103Z,1513277066.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:26.451Z,1513277066.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:26.833Z,1513277066.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:27.235Z,1513277067.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:27.653Z,1513277067.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:28.059Z,1513277068.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:28.455Z,1513277068.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:28.912Z,1513277068.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:29.236Z,1513277069.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:29.631Z,1513277069.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:30.036Z,1513277070.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:30.439Z,1513277070.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:30.863Z,1513277070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:31.261Z,1513277071.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:31.667Z,1513277071.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:32.120Z,1513277072.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:32.436Z,1513277072.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:32.840Z,1513277072.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:33.239Z,1513277073.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:33.648Z,1513277073.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:34.051Z,1513277074.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:34.494Z,1513277074.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:34.839Z,1513277074.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:35.294Z,1513277075.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:35.637Z,1513277075.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:36.048Z,1513277076.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:36.438Z,1513277076.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:36.844Z,1513277076.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:37.251Z,1513277077.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:37.644Z,1513277077.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:38.043Z,1513277078.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:38.475Z,1513277078.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:38.848Z,1513277078.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:39.244Z,1513277079.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:39.655Z,1513277079.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:40.075Z,1513277080.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:40.455Z,1513277080.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:40.841Z,1513277080.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:41.244Z,1513277081.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:41.694Z,1513277081.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:42.051Z,1513277082.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:42.460Z,1513277082.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:42.859Z,1513277082.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:43.255Z,1513277083.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:43.651Z,1513277083.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:44.043Z,1513277084.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:44.447Z,1513277084.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:44.892Z,1513277084.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:45.259Z,1513277085.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:45.654Z,1513277085.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:46.040Z,1513277086.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:46.503Z,1513277086.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:46.846Z,1513277086.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:47.262Z,1513277087.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:47.652Z,1513277087.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:48.147Z,1513277088.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:48.452Z,1513277088.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:48.847Z,1513277088.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:49.244Z,1513277089.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:49.643Z,1513277089.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:50.054Z,1513277090.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:50.438Z,1513277090.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:50.856Z,1513277090.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:51.323Z,1513277091.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:51.663Z,1513277091.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:52.049Z,1513277092.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:52.455Z,1513277092.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:52.851Z,1513277092.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:53.246Z,1513277093.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:53.250Z,1513277093.250 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T18:39:52.9Z
2017-12-14T18:44:53.250Z,1513277093.250 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:44:53.250Z,1513277093.250 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:44:53.657Z,1513277093.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:54.640Z,1513277094.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:54.678Z,1513277094.678 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-14T18:44:54.678Z,1513277094.678 [DropWeight] No Fault, FailCount= 1
2017-12-14T18:44:57.952Z,1513277097.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:58.042Z,1513277098.042 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0420.lzma
2017-12-14T18:44:58.103Z,1513277098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:58.469Z,1513277098.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:44:58.825Z,1513277098.825 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0420.lzma.bak
2017-12-14T18:44:58.825Z,1513277098.825 [DataOverHttps](INFO): SBD MOMSN=5439380
2017-12-14T18:44:58.881Z,1513277098.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:00.147Z,1513277100.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:00.308Z,1513277100.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:03.707Z,1513277103.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:03.707Z,1513277103.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 363
2017-12-14T18:45:03.707Z,1513277103.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:45:03.710Z,1513277103.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:03.710Z,1513277103.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 363
2017-12-14T18:45:03.710Z,1513277103.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:45:03.712Z,1513277103.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:03.712Z,1513277103.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 363
2017-12-14T18:45:03.712Z,1513277103.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:45:03.725Z,1513277103.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:45:03.725Z,1513277103.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:45:03.725Z,1513277103.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:45:03.897Z,1513277103.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:45:03.898Z,1513277103.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 363
2017-12-14T18:45:03.898Z,1513277103.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:45:03.898Z,1513277103.898 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 363
2017-12-14T18:45:03.899Z,1513277103.899 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:45:03.899Z,1513277103.899 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 363
2017-12-14T18:45:04.186Z,1513277104.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:45:04.186Z,1513277104.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:45:04.187Z,1513277104.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:45:04.187Z,1513277104.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:45:04.188Z,1513277104.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:45:04.188Z,1513277104.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:45:04.188Z,1513277104.188 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:45:04.197Z,1513277104.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:45:04.197Z,1513277104.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:45:04.600Z,1513277104.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:04.994Z,1513277104.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:05.393Z,1513277105.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:08.910Z,1513277108.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:08.989Z,1513277108.989 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0421.lzma
2017-12-14T18:45:09.053Z,1513277109.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:09.436Z,1513277109.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:09.772Z,1513277109.772 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0421.lzma.bak
2017-12-14T18:45:09.772Z,1513277109.772 [DataOverHttps](INFO): SBD MOMSN=5439382
2017-12-14T18:45:09.843Z,1513277109.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:11.123Z,1513277111.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:11.126Z,1513277111.126 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:45:11.126Z,1513277111.126 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:45:11.127Z,1513277111.127 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:45:11.234Z,1513277111.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:14.688Z,1513277114.688 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:45:14.688Z,1513277114.688 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:45:14.688Z,1513277114.688 [BPC1](ERROR): Communications Fault
2017-12-14T18:45:14.696Z,1513277114.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:14.752Z,1513277114.752 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:45:14.838Z,1513277114.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:15.236Z,1513277115.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:15.626Z,1513277115.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:15.651Z,1513277115.651 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:45:15.651Z,1513277115.651 [BPC1] No Fault, FailCount= 1
2017-12-14T18:45:16.067Z,1513277116.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:16.407Z,1513277116.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:16.895Z,1513277116.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:17.228Z,1513277117.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:17.625Z,1513277117.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:18.033Z,1513277118.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:18.423Z,1513277118.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:18.821Z,1513277118.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:19.215Z,1513277119.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:19.633Z,1513277119.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:20.032Z,1513277120.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:20.422Z,1513277120.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:20.811Z,1513277120.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:21.223Z,1513277121.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:21.617Z,1513277121.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:22.027Z,1513277122.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:22.410Z,1513277122.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:22.823Z,1513277122.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:23.224Z,1513277123.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:23.657Z,1513277123.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:24.020Z,1513277124.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:24.506Z,1513277124.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:24.819Z,1513277124.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:25.221Z,1513277125.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:25.627Z,1513277125.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:26.025Z,1513277126.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:26.446Z,1513277126.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:26.827Z,1513277126.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:27.264Z,1513277127.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:27.618Z,1513277127.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:28.020Z,1513277128.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:28.422Z,1513277128.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:28.836Z,1513277128.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:29.232Z,1513277129.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:29.672Z,1513277129.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:30.026Z,1513277130.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:30.415Z,1513277130.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:30.824Z,1513277130.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:31.230Z,1513277131.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:31.674Z,1513277131.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:32.042Z,1513277132.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:32.439Z,1513277132.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:32.882Z,1513277132.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:33.219Z,1513277133.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:33.611Z,1513277133.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:34.012Z,1513277134.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:34.415Z,1513277134.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:34.867Z,1513277134.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:35.262Z,1513277135.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:35.631Z,1513277135.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:36.108Z,1513277136.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:36.459Z,1513277136.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:36.819Z,1513277136.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:37.235Z,1513277137.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:37.631Z,1513277137.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:38.031Z,1513277138.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:38.426Z,1513277138.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:38.812Z,1513277138.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:39.216Z,1513277139.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:39.617Z,1513277139.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:40.012Z,1513277140.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:40.423Z,1513277140.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:40.827Z,1513277140.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:41.235Z,1513277141.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:41.630Z,1513277141.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:42.022Z,1513277142.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:42.470Z,1513277142.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:42.819Z,1513277142.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:43.230Z,1513277143.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:43.625Z,1513277143.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:44.029Z,1513277144.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:44.435Z,1513277144.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:44.834Z,1513277144.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:45.208Z,1513277145.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:45.695Z,1513277145.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:46.039Z,1513277146.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:46.426Z,1513277146.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:46.879Z,1513277146.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:47.243Z,1513277147.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:47.632Z,1513277147.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:48.007Z,1513277148.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:48.443Z,1513277148.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:48.857Z,1513277148.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:49.216Z,1513277149.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:49.618Z,1513277149.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:50.042Z,1513277150.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:50.455Z,1513277150.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:50.817Z,1513277150.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:51.219Z,1513277151.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:51.623Z,1513277151.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:52.051Z,1513277152.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:52.419Z,1513277152.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:52.823Z,1513277152.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:53.223Z,1513277153.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:53.621Z,1513277153.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:54.023Z,1513277154.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:54.420Z,1513277154.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:54.815Z,1513277154.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:55.260Z,1513277155.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:55.623Z,1513277155.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:56.070Z,1513277156.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:56.419Z,1513277156.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:56.820Z,1513277156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:57.216Z,1513277157.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:57.676Z,1513277157.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:58.012Z,1513277158.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:58.475Z,1513277158.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:58.835Z,1513277158.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:59.266Z,1513277159.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:45:59.623Z,1513277159.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:00.051Z,1513277160.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:00.420Z,1513277160.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:00.820Z,1513277160.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:01.213Z,1513277161.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:01.636Z,1513277161.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:02.039Z,1513277162.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:02.438Z,1513277162.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:02.820Z,1513277162.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:03.227Z,1513277163.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:03.622Z,1513277163.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:04.018Z,1513277164.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:04.419Z,1513277164.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:04.847Z,1513277164.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:05.233Z,1513277165.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:05.777Z,1513277165.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:06.033Z,1513277166.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:06.428Z,1513277166.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:06.827Z,1513277166.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:07.218Z,1513277167.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:07.667Z,1513277167.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:08.035Z,1513277168.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:08.440Z,1513277168.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:08.820Z,1513277168.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:09.207Z,1513277169.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:09.622Z,1513277169.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:10.019Z,1513277170.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:10.423Z,1513277170.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:10.823Z,1513277170.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:11.244Z,1513277171.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:11.646Z,1513277171.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:15.051Z,1513277175.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:15.190Z,1513277175.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:15.559Z,1513277175.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:15.957Z,1513277175.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:16.370Z,1513277176.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:16.725Z,1513277176.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:17.123Z,1513277177.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:17.529Z,1513277177.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:17.962Z,1513277177.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:18.407Z,1513277178.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:18.750Z,1513277178.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:19.143Z,1513277179.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:19.619Z,1513277179.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:20.007Z,1513277180.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:20.373Z,1513277180.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:20.784Z,1513277180.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:21.141Z,1513277181.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:21.619Z,1513277181.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:22.000Z,1513277182.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:22.363Z,1513277182.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:22.743Z,1513277182.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:23.163Z,1513277183.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:23.558Z,1513277183.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:24.021Z,1513277184.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:24.352Z,1513277184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:24.799Z,1513277184.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:25.172Z,1513277185.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:25.532Z,1513277185.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:25.972Z,1513277185.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:26.332Z,1513277186.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:26.774Z,1513277186.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:27.223Z,1513277187.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:27.568Z,1513277187.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:28.045Z,1513277188.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:28.360Z,1513277188.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:28.736Z,1513277188.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:29.116Z,1513277189.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:29.566Z,1513277189.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:30.094Z,1513277190.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:30.381Z,1513277190.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:30.733Z,1513277190.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:31.142Z,1513277191.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:31.585Z,1513277191.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:31.963Z,1513277191.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:32.398Z,1513277192.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:32.763Z,1513277192.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:33.165Z,1513277193.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:33.556Z,1513277193.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:33.994Z,1513277193.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:34.366Z,1513277194.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:34.804Z,1513277194.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:35.206Z,1513277195.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:35.556Z,1513277195.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:36.023Z,1513277196.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:36.383Z,1513277196.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:36.770Z,1513277196.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:37.156Z,1513277197.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:37.571Z,1513277197.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:38.011Z,1513277198.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:38.382Z,1513277198.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:38.785Z,1513277198.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:39.143Z,1513277199.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:39.548Z,1513277199.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:39.996Z,1513277199.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:40.336Z,1513277200.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:40.776Z,1513277200.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:41.202Z,1513277201.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:41.600Z,1513277201.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:42.060Z,1513277202.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:42.374Z,1513277202.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:42.752Z,1513277202.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:43.162Z,1513277203.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:43.568Z,1513277203.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:43.972Z,1513277203.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:44.404Z,1513277204.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:44.789Z,1513277204.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:45.124Z,1513277205.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:45.550Z,1513277205.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:45.974Z,1513277205.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:46.362Z,1513277206.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:46.743Z,1513277206.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:47.176Z,1513277207.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:47.581Z,1513277207.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:48.043Z,1513277208.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:48.343Z,1513277208.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:48.743Z,1513277208.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:49.147Z,1513277209.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:49.547Z,1513277209.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:49.987Z,1513277209.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:50.375Z,1513277210.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:50.735Z,1513277210.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:51.138Z,1513277211.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:51.539Z,1513277211.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:52.039Z,1513277212.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:52.380Z,1513277212.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:52.759Z,1513277212.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:53.143Z,1513277213.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:53.535Z,1513277213.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:53.993Z,1513277213.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:54.327Z,1513277214.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:54.725Z,1513277214.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:55.121Z,1513277215.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:55.556Z,1513277215.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:56.010Z,1513277216.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:56.336Z,1513277216.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:56.726Z,1513277216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:57.131Z,1513277217.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:57.526Z,1513277217.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:57.946Z,1513277217.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:58.378Z,1513277218.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:58.749Z,1513277218.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:59.139Z,1513277219.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:59.539Z,1513277219.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:46:59.934Z,1513277219.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:00.347Z,1513277220.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:00.752Z,1513277220.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:01.139Z,1513277221.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:01.541Z,1513277221.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:01.979Z,1513277221.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:02.358Z,1513277222.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:02.826Z,1513277222.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:03.128Z,1513277223.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:03.523Z,1513277223.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:04.093Z,1513277224.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:04.349Z,1513277224.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:04.731Z,1513277224.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:05.167Z,1513277225.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:05.529Z,1513277225.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:05.988Z,1513277225.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:06.326Z,1513277226.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:06.726Z,1513277226.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:07.124Z,1513277227.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:07.548Z,1513277227.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:07.999Z,1513277227.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:08.352Z,1513277228.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:08.741Z,1513277228.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:09.126Z,1513277229.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:09.536Z,1513277229.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:10.007Z,1513277230.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:10.403Z,1513277230.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:10.781Z,1513277230.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:11.146Z,1513277231.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:11.614Z,1513277231.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:11.947Z,1513277231.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:15.413Z,1513277235.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:15.551Z,1513277235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:15.966Z,1513277235.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:16.353Z,1513277236.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:16.754Z,1513277236.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:17.115Z,1513277237.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:17.516Z,1513277237.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:17.964Z,1513277237.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:18.327Z,1513277238.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:18.716Z,1513277238.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:19.146Z,1513277239.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:19.525Z,1513277239.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:20.008Z,1513277240.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:20.310Z,1513277240.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:20.712Z,1513277240.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:21.120Z,1513277241.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:21.531Z,1513277241.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:21.970Z,1513277241.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:22.331Z,1513277242.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:22.721Z,1513277242.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:23.181Z,1513277243.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:23.523Z,1513277243.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:23.986Z,1513277243.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:24.335Z,1513277244.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:24.730Z,1513277244.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:25.104Z,1513277245.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:25.516Z,1513277245.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:25.987Z,1513277245.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:26.393Z,1513277246.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:26.719Z,1513277246.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:27.107Z,1513277247.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:27.560Z,1513277247.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:28.002Z,1513277248.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:28.344Z,1513277248.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:28.762Z,1513277248.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:29.113Z,1513277249.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:29.599Z,1513277249.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:29.981Z,1513277249.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:30.349Z,1513277250.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:30.715Z,1513277250.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:31.112Z,1513277251.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:31.522Z,1513277251.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:32.007Z,1513277252.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:32.362Z,1513277252.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:32.742Z,1513277252.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:33.123Z,1513277253.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:33.522Z,1513277253.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:33.987Z,1513277253.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:34.347Z,1513277254.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:34.710Z,1513277254.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:35.123Z,1513277255.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:35.525Z,1513277255.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:36.032Z,1513277256.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:36.367Z,1513277256.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:36.717Z,1513277256.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:37.111Z,1513277257.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:37.525Z,1513277257.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:38.027Z,1513277258.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:38.339Z,1513277258.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:38.711Z,1513277258.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:39.118Z,1513277259.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:39.521Z,1513277259.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:39.931Z,1513277259.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:40.358Z,1513277260.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:40.724Z,1513277260.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:41.120Z,1513277261.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:41.518Z,1513277261.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:41.915Z,1513277261.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:42.400Z,1513277262.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:42.717Z,1513277262.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:43.120Z,1513277263.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:43.574Z,1513277263.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:43.985Z,1513277263.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:44.323Z,1513277264.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:44.711Z,1513277264.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:45.113Z,1513277265.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:45.563Z,1513277265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:46.006Z,1513277266.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:46.365Z,1513277266.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:46.716Z,1513277266.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:47.114Z,1513277267.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:47.529Z,1513277267.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:47.987Z,1513277267.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:48.364Z,1513277268.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:48.785Z,1513277268.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:49.123Z,1513277269.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:49.527Z,1513277269.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:50.004Z,1513277270.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:50.335Z,1513277270.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:50.819Z,1513277270.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:51.105Z,1513277271.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:51.548Z,1513277271.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:52.021Z,1513277272.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:52.350Z,1513277272.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:52.711Z,1513277272.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:53.115Z,1513277273.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:53.516Z,1513277273.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:53.920Z,1513277273.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:54.367Z,1513277274.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:54.716Z,1513277274.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:55.113Z,1513277275.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:55.522Z,1513277275.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:55.922Z,1513277275.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:56.325Z,1513277276.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:56.724Z,1513277276.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:57.128Z,1513277277.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:57.524Z,1513277277.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:58.003Z,1513277278.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:58.377Z,1513277278.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:58.735Z,1513277278.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:59.118Z,1513277279.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:47:59.532Z,1513277279.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:00.031Z,1513277280.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:00.350Z,1513277280.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:00.707Z,1513277280.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:01.107Z,1513277281.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:01.560Z,1513277281.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:02.008Z,1513277282.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:02.344Z,1513277282.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:02.712Z,1513277282.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:03.114Z,1513277283.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:03.531Z,1513277283.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:03.999Z,1513277283.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:04.332Z,1513277284.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:04.332Z,1513277284.332 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 364
2017-12-14T18:48:04.332Z,1513277284.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:48:04.334Z,1513277284.334 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:04.334Z,1513277284.334 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 364
2017-12-14T18:48:04.334Z,1513277284.334 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:48:04.336Z,1513277284.336 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:04.336Z,1513277284.336 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 364
2017-12-14T18:48:04.336Z,1513277284.336 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:48:04.371Z,1513277284.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:48:04.371Z,1513277284.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:48:04.371Z,1513277284.371 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:48:04.793Z,1513277284.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:48:04.793Z,1513277284.793 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 364
2017-12-14T18:48:04.794Z,1513277284.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:48:04.794Z,1513277284.794 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 364
2017-12-14T18:48:04.794Z,1513277284.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:48:04.794Z,1513277284.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 364
2017-12-14T18:48:05.106Z,1513277285.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:48:05.107Z,1513277285.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:48:05.107Z,1513277285.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:48:05.107Z,1513277285.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:48:05.108Z,1513277285.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:48:05.108Z,1513277285.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:48:05.108Z,1513277285.108 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:48:05.142Z,1513277285.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:48:05.143Z,1513277285.143 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:48:05.516Z,1513277285.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:06.002Z,1513277286.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:06.339Z,1513277286.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:06.719Z,1513277286.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:07.115Z,1513277287.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:07.514Z,1513277287.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:07.960Z,1513277287.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:08.327Z,1513277288.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:08.716Z,1513277288.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:09.113Z,1513277289.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:09.524Z,1513277289.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:09.923Z,1513277289.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:10.324Z,1513277290.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:10.723Z,1513277290.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:11.140Z,1513277291.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:11.527Z,1513277291.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:12.050Z,1513277292.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:12.352Z,1513277292.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:15.819Z,1513277295.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:16.002Z,1513277296.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:16.340Z,1513277296.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:16.715Z,1513277296.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:17.100Z,1513277297.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:17.539Z,1513277297.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:17.955Z,1513277297.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:18.293Z,1513277298.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:18.715Z,1513277298.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:19.115Z,1513277299.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:19.504Z,1513277299.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:19.888Z,1513277299.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:20.303Z,1513277300.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:20.748Z,1513277300.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:21.099Z,1513277301.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:21.502Z,1513277301.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:21.912Z,1513277301.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:22.320Z,1513277302.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:22.691Z,1513277302.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:23.102Z,1513277303.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:23.515Z,1513277303.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:23.940Z,1513277303.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:24.338Z,1513277304.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:24.728Z,1513277304.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:25.089Z,1513277305.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:25.490Z,1513277305.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:25.983Z,1513277305.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:26.291Z,1513277306.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:26.704Z,1513277306.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:27.144Z,1513277307.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:27.508Z,1513277307.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:27.959Z,1513277307.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:28.285Z,1513277308.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:28.691Z,1513277308.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:29.090Z,1513277309.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:29.495Z,1513277309.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:29.972Z,1513277309.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:30.357Z,1513277310.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:30.691Z,1513277310.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:31.113Z,1513277311.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:31.510Z,1513277311.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:31.990Z,1513277311.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:32.319Z,1513277312.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:32.687Z,1513277312.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:33.092Z,1513277313.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:33.548Z,1513277313.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:33.993Z,1513277313.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:34.312Z,1513277314.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:34.704Z,1513277314.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:35.099Z,1513277315.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:35.504Z,1513277315.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:35.915Z,1513277315.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:36.326Z,1513277316.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:36.839Z,1513277316.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:37.090Z,1513277317.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:37.531Z,1513277317.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:37.899Z,1513277317.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:38.379Z,1513277318.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:38.693Z,1513277318.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:39.098Z,1513277319.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:39.504Z,1513277319.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:40.016Z,1513277320.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:40.321Z,1513277320.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:40.683Z,1513277320.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:41.107Z,1513277321.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:41.512Z,1513277321.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:41.955Z,1513277321.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:42.292Z,1513277322.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:42.691Z,1513277322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:43.098Z,1513277323.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:43.502Z,1513277323.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:43.990Z,1513277323.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:44.313Z,1513277324.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:44.701Z,1513277324.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:45.099Z,1513277325.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:45.511Z,1513277325.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:45.975Z,1513277325.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:46.376Z,1513277326.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:46.732Z,1513277326.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:47.088Z,1513277327.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:47.495Z,1513277327.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:47.892Z,1513277327.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:48.302Z,1513277328.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:48.706Z,1513277328.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:49.104Z,1513277329.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:49.538Z,1513277329.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:49.903Z,1513277329.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:50.328Z,1513277330.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:50.684Z,1513277330.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:51.111Z,1513277331.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:51.508Z,1513277331.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:51.911Z,1513277331.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:52.335Z,1513277332.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:52.773Z,1513277332.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:53.091Z,1513277333.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:53.515Z,1513277333.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:53.982Z,1513277333.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:54.327Z,1513277334.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:54.693Z,1513277334.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:55.095Z,1513277335.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:55.503Z,1513277335.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:56.027Z,1513277336.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:56.326Z,1513277336.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:56.696Z,1513277336.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:57.096Z,1513277337.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:57.503Z,1513277337.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:57.981Z,1513277337.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:58.315Z,1513277338.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:58.754Z,1513277338.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:59.083Z,1513277339.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:59.569Z,1513277339.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:48:59.985Z,1513277339.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:00.358Z,1513277340.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:00.742Z,1513277340.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:01.099Z,1513277341.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:01.505Z,1513277341.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:01.980Z,1513277341.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:02.363Z,1513277342.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:02.698Z,1513277342.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:03.104Z,1513277343.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:03.512Z,1513277343.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:03.908Z,1513277343.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:04.334Z,1513277344.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:04.714Z,1513277344.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:05.163Z,1513277345.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:05.559Z,1513277345.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:05.908Z,1513277345.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:06.331Z,1513277346.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:06.692Z,1513277346.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:07.095Z,1513277347.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:07.504Z,1513277347.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:07.966Z,1513277347.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:08.314Z,1513277348.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:08.752Z,1513277348.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:09.088Z,1513277349.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:09.515Z,1513277349.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:09.972Z,1513277349.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:10.331Z,1513277350.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:10.699Z,1513277350.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:11.092Z,1513277351.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:11.512Z,1513277351.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:11.976Z,1513277351.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:12.300Z,1513277352.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:12.698Z,1513277352.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:16.285Z,1513277356.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:16.419Z,1513277356.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:16.794Z,1513277356.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:17.176Z,1513277357.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:17.571Z,1513277357.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:17.969Z,1513277357.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:18.396Z,1513277358.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:18.785Z,1513277358.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:19.184Z,1513277359.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:19.591Z,1513277359.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:19.980Z,1513277359.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:20.380Z,1513277360.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:20.834Z,1513277360.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:21.164Z,1513277361.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:21.670Z,1513277361.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:21.993Z,1513277361.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:22.407Z,1513277362.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:22.767Z,1513277362.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:23.189Z,1513277363.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:23.566Z,1513277363.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:23.999Z,1513277363.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:24.371Z,1513277364.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:24.819Z,1513277364.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:25.188Z,1513277365.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:25.594Z,1513277365.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:26.056Z,1513277366.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:26.387Z,1513277366.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:26.770Z,1513277366.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:27.170Z,1513277367.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:27.569Z,1513277367.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:28.051Z,1513277368.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:28.393Z,1513277368.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:28.766Z,1513277368.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:29.164Z,1513277369.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:29.588Z,1513277369.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:30.036Z,1513277370.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:30.392Z,1513277370.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:30.815Z,1513277370.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:30.829Z,1513277370.829 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:49:31.242Z,1513277371.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:31.587Z,1513277371.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:31.982Z,1513277371.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:32.355Z,1513277372.355 [PNI_TCM](ERROR): CRC does not match. Expected:0x43956 got:0x26393
2017-12-14T18:49:32.383Z,1513277372.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:32.781Z,1513277372.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:33.154Z,1513277373.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:33.588Z,1513277373.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:33.960Z,1513277373.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:34.428Z,1513277374.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:34.786Z,1513277374.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:35.158Z,1513277375.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:35.581Z,1513277375.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:35.991Z,1513277375.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:36.379Z,1513277376.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:36.770Z,1513277376.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:37.195Z,1513277377.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:37.618Z,1513277377.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:37.992Z,1513277377.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:38.370Z,1513277378.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:38.772Z,1513277378.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:39.187Z,1513277379.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:39.589Z,1513277379.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:39.979Z,1513277379.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:40.379Z,1513277380.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:40.803Z,1513277380.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:41.183Z,1513277381.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:41.572Z,1513277381.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:41.999Z,1513277381.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:42.426Z,1513277382.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:42.865Z,1513277382.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:43.213Z,1513277383.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:43.584Z,1513277383.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:44.099Z,1513277384.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:44.382Z,1513277384.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:44.802Z,1513277384.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:45.174Z,1513277385.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:45.600Z,1513277385.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:45.973Z,1513277385.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x3078 got:0x35440
2017-12-14T18:49:46.004Z,1513277386.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:46.390Z,1513277386.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:46.776Z,1513277386.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:47.171Z,1513277387.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:47.586Z,1513277387.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:47.983Z,1513277387.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:48.366Z,1513277388.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:48.803Z,1513277388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:49.193Z,1513277389.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:49.569Z,1513277389.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:49.991Z,1513277389.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:50.404Z,1513277390.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:50.788Z,1513277390.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:51.182Z,1513277391.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:51.585Z,1513277391.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:51.996Z,1513277391.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:52.384Z,1513277392.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:52.768Z,1513277392.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:53.200Z,1513277393.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:53.600Z,1513277393.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:54.021Z,1513277394.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:54.377Z,1513277394.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:54.780Z,1513277394.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:55.183Z,1513277395.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:55.593Z,1513277395.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:55.987Z,1513277395.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:56.375Z,1513277396.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:56.830Z,1513277396.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:57.152Z,1513277397.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:57.583Z,1513277397.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:58.030Z,1513277398.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:58.398Z,1513277398.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:58.797Z,1513277398.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:59.167Z,1513277399.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:49:59.563Z,1513277399.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:00.019Z,1513277400.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:00.393Z,1513277400.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:00.781Z,1513277400.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:01.184Z,1513277401.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:01.591Z,1513277401.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:01.982Z,1513277401.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:02.378Z,1513277402.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:02.783Z,1513277402.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:03.208Z,1513277403.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:03.588Z,1513277403.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:04.006Z,1513277404.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:04.387Z,1513277404.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:04.796Z,1513277404.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:05.202Z,1513277405.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:05.603Z,1513277405.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:05.991Z,1513277405.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:06.431Z,1513277406.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:06.776Z,1513277406.776 [PNI_TCM](ERROR): CRC does not match. Expected:0x31497 got:0x16897
2017-12-14T18:50:06.811Z,1513277406.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:07.215Z,1513277407.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:07.586Z,1513277407.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:07.982Z,1513277407.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:08.369Z,1513277408.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:08.764Z,1513277408.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:09.159Z,1513277409.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:09.644Z,1513277409.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:09.992Z,1513277409.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:10.386Z,1513277410.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:10.762Z,1513277410.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:11.187Z,1513277411.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:11.552Z,1513277411.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:11.561Z,1513277411.561 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T18:50:11.562Z,1513277411.562 [Default:CheckIn:C.Wait] Stopped
2017-12-14T18:50:11.562Z,1513277411.562 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T18:50:11.562Z,1513277411.562 [Default:CheckIn:D] Running Loop=1
2017-12-14T18:50:12.037Z,1513277412.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:12.040Z,1513277412.040 [Default:CheckIn:D] Stopped
2017-12-14T18:50:12.040Z,1513277412.040 [Default:CheckIn:E] Running Loop=1
2017-12-14T18:50:12.368Z,1513277412.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:12.376Z,1513277412.376 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1096.944141 min 
2017-12-14T18:50:12.376Z,1513277412.376 [Default:CheckIn:E] Stopped
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn] Stopped
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn](INFO): Running loop #106
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn] Running Loop=106
2017-12-14T18:50:12.381Z,1513277412.381 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T18:50:12.382Z,1513277412.382 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T18:50:12.811Z,1513277412.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:16.415Z,1513277416.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:16.556Z,1513277416.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:16.900Z,1513277416.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:17.304Z,1513277417.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:17.691Z,1513277417.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:18.092Z,1513277418.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:18.511Z,1513277418.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:18.908Z,1513277418.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:19.305Z,1513277419.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:19.686Z,1513277419.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:20.111Z,1513277420.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:20.511Z,1513277420.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:20.913Z,1513277420.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:21.311Z,1513277421.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:21.685Z,1513277421.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:22.086Z,1513277422.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:22.510Z,1513277422.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:22.909Z,1513277422.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:23.319Z,1513277423.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:23.681Z,1513277423.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:24.111Z,1513277424.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:24.516Z,1513277424.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:24.896Z,1513277424.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:25.316Z,1513277425.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:25.699Z,1513277425.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:26.095Z,1513277426.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:26.500Z,1513277426.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:26.897Z,1513277426.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:27.293Z,1513277427.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:27.690Z,1513277427.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:28.090Z,1513277428.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:28.575Z,1513277428.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:28.903Z,1513277428.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:29.301Z,1513277429.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:29.739Z,1513277429.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:30.099Z,1513277430.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:30.543Z,1513277430.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:30.911Z,1513277430.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:31.301Z,1513277431.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:31.694Z,1513277431.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:32.077Z,1513277432.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:32.510Z,1513277432.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:32.907Z,1513277432.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:33.311Z,1513277433.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:33.703Z,1513277433.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:34.105Z,1513277434.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:34.509Z,1513277434.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:34.932Z,1513277434.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:35.314Z,1513277435.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:35.684Z,1513277435.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:36.088Z,1513277436.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:36.518Z,1513277436.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:36.910Z,1513277436.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:37.312Z,1513277437.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:37.703Z,1513277437.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:38.123Z,1513277438.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:38.518Z,1513277438.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:38.935Z,1513277438.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:39.319Z,1513277439.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:39.686Z,1513277439.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:40.087Z,1513277440.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:40.494Z,1513277440.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:40.899Z,1513277440.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:41.320Z,1513277441.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:41.689Z,1513277441.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:42.086Z,1513277442.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:42.524Z,1513277442.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:42.903Z,1513277442.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:43.295Z,1513277443.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:43.688Z,1513277443.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:44.099Z,1513277444.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:44.579Z,1513277444.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:44.900Z,1513277444.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:45.295Z,1513277445.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:45.687Z,1513277445.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:46.091Z,1513277446.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:46.503Z,1513277446.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:46.896Z,1513277446.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:47.304Z,1513277447.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:47.737Z,1513277447.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:48.091Z,1513277448.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:48.501Z,1513277448.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:48.907Z,1513277448.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:49.307Z,1513277449.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:49.692Z,1513277449.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:50.091Z,1513277450.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:50.500Z,1513277450.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:50.900Z,1513277450.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:51.363Z,1513277451.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:51.709Z,1513277451.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:52.107Z,1513277452.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:52.511Z,1513277452.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:52.954Z,1513277452.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:53.315Z,1513277453.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:53.684Z,1513277453.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:54.170Z,1513277454.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:54.512Z,1513277454.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:54.912Z,1513277454.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:55.310Z,1513277455.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:55.684Z,1513277455.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:56.084Z,1513277456.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:56.519Z,1513277456.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:56.913Z,1513277456.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:57.369Z,1513277457.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:57.687Z,1513277457.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:58.088Z,1513277458.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:58.515Z,1513277458.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:58.887Z,1513277458.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:59.289Z,1513277459.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:59.657Z,1513277459.657 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T18:50:59.657Z,1513277459.657 [NAL9602] Data Fault, FailCount= 5
2017-12-14T18:50:59.657Z,1513277459.657 [NAL9602](ERROR): Data Fault
2017-12-14T18:50:59.689Z,1513277459.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:50:59.722Z,1513277459.722 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T18:50:59.722Z,1513277459.722 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-12-14T18:51:00.047Z,1513277460.047 [NAL9602](INFO): Powering down
2017-12-14T18:51:00.099Z,1513277460.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:00.132Z,1513277460.132 [CBIT](INFO): Critical error at 20171214T185059
2017-12-14T18:51:00.551Z,1513277460.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:00.887Z,1513277460.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:01.319Z,1513277461.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:01.691Z,1513277461.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:02.096Z,1513277462.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:02.491Z,1513277462.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:02.890Z,1513277462.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:03.290Z,1513277463.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:03.754Z,1513277463.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:04.097Z,1513277464.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:04.503Z,1513277464.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:04.890Z,1513277464.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:05.290Z,1513277465.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:05.290Z,1513277465.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 365
2017-12-14T18:51:05.290Z,1513277465.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:51:05.292Z,1513277465.292 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:05.292Z,1513277465.292 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 365
2017-12-14T18:51:05.292Z,1513277465.292 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:51:05.294Z,1513277465.294 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:05.294Z,1513277465.294 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 365
2017-12-14T18:51:05.294Z,1513277465.294 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:51:05.306Z,1513277465.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:51:05.306Z,1513277465.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:51:05.306Z,1513277465.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:51:05.696Z,1513277465.696 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:51:05.696Z,1513277465.696 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 365
2017-12-14T18:51:05.696Z,1513277465.696 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:51:05.696Z,1513277465.696 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 365
2017-12-14T18:51:05.697Z,1513277465.697 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:51:05.697Z,1513277465.697 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 365
2017-12-14T18:51:06.090Z,1513277466.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:51:06.090Z,1513277466.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:51:06.090Z,1513277466.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:51:06.091Z,1513277466.091 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:51:06.091Z,1513277466.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:51:06.091Z,1513277466.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:51:06.092Z,1513277466.092 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:51:06.092Z,1513277466.092 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:51:06.093Z,1513277466.093 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:51:06.494Z,1513277466.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:06.935Z,1513277466.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:07.297Z,1513277467.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:07.696Z,1513277467.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:08.099Z,1513277468.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:08.484Z,1513277468.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:08.906Z,1513277468.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:09.280Z,1513277469.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:09.680Z,1513277469.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:10.123Z,1513277470.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:10.496Z,1513277470.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:10.896Z,1513277470.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:11.299Z,1513277471.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:11.689Z,1513277471.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:12.098Z,1513277472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:12.503Z,1513277472.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:12.884Z,1513277472.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:16.414Z,1513277476.414 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:51:16.414Z,1513277476.414 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:51:16.414Z,1513277476.414 [BPC1](ERROR): Communications Fault
2017-12-14T18:51:16.423Z,1513277476.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:16.436Z,1513277476.436 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:51:16.607Z,1513277476.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:16.911Z,1513277476.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:17.308Z,1513277477.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:17.365Z,1513277477.365 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:51:17.365Z,1513277477.365 [BPC1] No Fault, FailCount= 1
2017-12-14T18:51:17.799Z,1513277477.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:18.149Z,1513277478.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:18.528Z,1513277478.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:18.938Z,1513277478.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:19.331Z,1513277479.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:19.748Z,1513277479.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:20.174Z,1513277480.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:20.527Z,1513277480.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:20.929Z,1513277480.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:21.339Z,1513277481.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:21.754Z,1513277481.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:22.142Z,1513277482.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:22.511Z,1513277482.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:22.921Z,1513277482.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:23.367Z,1513277483.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:23.760Z,1513277483.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:24.163Z,1513277484.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:24.513Z,1513277484.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:24.914Z,1513277484.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:25.340Z,1513277485.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:25.737Z,1513277485.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:26.147Z,1513277486.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:26.512Z,1513277486.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:26.919Z,1513277486.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:27.317Z,1513277487.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:27.727Z,1513277487.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:28.139Z,1513277488.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:28.533Z,1513277488.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:28.955Z,1513277488.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:29.343Z,1513277489.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:29.767Z,1513277489.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:30.152Z,1513277490.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:30.527Z,1513277490.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:30.923Z,1513277490.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:31.338Z,1513277491.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:31.731Z,1513277491.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:32.135Z,1513277492.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:32.564Z,1513277492.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:32.939Z,1513277492.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:33.375Z,1513277493.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:33.744Z,1513277493.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:34.140Z,1513277494.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:34.507Z,1513277494.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:34.947Z,1513277494.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:35.337Z,1513277495.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:35.746Z,1513277495.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:36.141Z,1513277496.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:36.550Z,1513277496.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:36.963Z,1513277496.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:37.351Z,1513277497.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:37.758Z,1513277497.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:38.163Z,1513277498.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:38.563Z,1513277498.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:38.947Z,1513277498.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:39.327Z,1513277499.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:39.777Z,1513277499.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:40.138Z,1513277500.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:40.523Z,1513277500.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:40.950Z,1513277500.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:41.345Z,1513277501.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:41.745Z,1513277501.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:42.151Z,1513277502.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:42.556Z,1513277502.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:42.974Z,1513277502.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:43.354Z,1513277503.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:43.755Z,1513277503.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:44.151Z,1513277504.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:44.519Z,1513277504.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:44.929Z,1513277504.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:45.351Z,1513277505.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:45.724Z,1513277505.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:46.128Z,1513277506.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:46.524Z,1513277506.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:46.955Z,1513277506.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:47.384Z,1513277507.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:47.742Z,1513277507.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:48.116Z,1513277508.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:48.523Z,1513277508.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:48.943Z,1513277508.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:49.350Z,1513277509.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:49.706Z,1513277509.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:50.112Z,1513277510.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:50.516Z,1513277510.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:50.916Z,1513277510.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:51.316Z,1513277511.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:51.712Z,1513277511.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:52.116Z,1513277512.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:52.516Z,1513277512.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:52.915Z,1513277512.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:53.311Z,1513277513.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:53.712Z,1513277513.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:54.119Z,1513277514.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:54.516Z,1513277514.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:54.915Z,1513277514.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:55.315Z,1513277515.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:55.718Z,1513277515.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:56.115Z,1513277516.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:56.523Z,1513277516.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:56.918Z,1513277516.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:57.314Z,1513277517.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:57.719Z,1513277517.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:58.123Z,1513277518.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:58.570Z,1513277518.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:59.012Z,1513277519.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:59.340Z,1513277519.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:51:59.713Z,1513277519.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:00.135Z,1513277520.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:00.523Z,1513277520.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:00.958Z,1513277520.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:01.322Z,1513277521.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:01.717Z,1513277521.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:02.161Z,1513277522.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:02.527Z,1513277522.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:02.917Z,1513277522.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:03.317Z,1513277523.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:03.722Z,1513277523.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:04.120Z,1513277524.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:04.515Z,1513277524.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:04.914Z,1513277524.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:05.343Z,1513277525.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:05.723Z,1513277525.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:06.132Z,1513277526.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:06.539Z,1513277526.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:06.920Z,1513277526.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:07.319Z,1513277527.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:07.714Z,1513277527.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:08.113Z,1513277528.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:08.524Z,1513277528.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:08.919Z,1513277528.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:09.358Z,1513277529.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:09.712Z,1513277529.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:10.112Z,1513277530.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:10.559Z,1513277530.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:10.915Z,1513277530.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:11.317Z,1513277531.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:11.757Z,1513277531.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:12.111Z,1513277532.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:12.512Z,1513277532.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:12.919Z,1513277532.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:16.624Z,1513277536.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:16.779Z,1513277536.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:17.155Z,1513277537.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:17.519Z,1513277537.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:18.000Z,1513277538.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:18.323Z,1513277538.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:18.722Z,1513277538.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:19.114Z,1513277539.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:19.514Z,1513277539.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:19.931Z,1513277539.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:20.327Z,1513277540.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:20.717Z,1513277540.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:21.135Z,1513277541.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:21.558Z,1513277541.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:21.926Z,1513277541.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:22.348Z,1513277542.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:22.704Z,1513277542.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:23.160Z,1513277543.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:23.512Z,1513277543.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:23.958Z,1513277543.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:24.323Z,1513277544.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:24.724Z,1513277544.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:25.116Z,1513277545.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:25.526Z,1513277545.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:25.978Z,1513277545.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:26.319Z,1513277546.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:26.723Z,1513277546.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:27.120Z,1513277547.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:27.578Z,1513277547.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:27.983Z,1513277547.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:28.306Z,1513277548.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:28.714Z,1513277548.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:29.110Z,1513277549.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:29.505Z,1513277549.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:29.989Z,1513277549.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:30.344Z,1513277550.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:30.761Z,1513277550.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:31.112Z,1513277551.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:31.540Z,1513277551.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:32.018Z,1513277552.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:32.343Z,1513277552.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:32.716Z,1513277552.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:33.120Z,1513277553.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:33.515Z,1513277553.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:33.977Z,1513277553.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:34.324Z,1513277554.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:34.717Z,1513277554.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:35.115Z,1513277555.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:35.516Z,1513277555.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:35.910Z,1513277555.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:36.354Z,1513277556.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:36.717Z,1513277556.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:37.136Z,1513277557.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:37.512Z,1513277557.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:37.978Z,1513277557.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:38.343Z,1513277558.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:38.709Z,1513277558.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:39.117Z,1513277559.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:39.511Z,1513277559.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:40.026Z,1513277560.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:40.379Z,1513277560.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:40.742Z,1513277560.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:41.112Z,1513277561.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:41.514Z,1513277561.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:41.982Z,1513277561.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:42.334Z,1513277562.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:42.741Z,1513277562.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:43.119Z,1513277563.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:43.548Z,1513277563.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:44.015Z,1513277564.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:44.400Z,1513277564.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:44.726Z,1513277564.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:45.135Z,1513277565.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:45.522Z,1513277565.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:45.988Z,1513277565.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:46.313Z,1513277566.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:46.752Z,1513277566.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:47.121Z,1513277567.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:47.523Z,1513277567.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:47.911Z,1513277567.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:48.330Z,1513277568.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:48.717Z,1513277568.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:49.115Z,1513277569.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:49.520Z,1513277569.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:49.968Z,1513277569.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:50.332Z,1513277570.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:50.728Z,1513277570.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:51.128Z,1513277571.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:51.523Z,1513277571.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:51.980Z,1513277571.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:52.314Z,1513277572.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:52.715Z,1513277572.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:53.144Z,1513277573.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:53.523Z,1513277573.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:53.987Z,1513277573.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:54.359Z,1513277574.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:54.714Z,1513277574.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:55.116Z,1513277575.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:55.521Z,1513277575.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:55.956Z,1513277575.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:56.366Z,1513277576.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:56.719Z,1513277576.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:57.132Z,1513277577.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:57.506Z,1513277577.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:57.975Z,1513277577.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:58.318Z,1513277578.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:58.711Z,1513277578.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:59.112Z,1513277579.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:52:59.514Z,1513277579.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:00.004Z,1513277580.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:00.055Z,1513277580.055 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T18:53:00.055Z,1513277580.055 [NAL9602] No Fault, FailCount= 5
2017-12-14T18:53:00.275Z,1513277580.275 [NAL9602](INFO): Powering up NAL9602
2017-12-14T18:53:00.351Z,1513277580.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:00.730Z,1513277580.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:01.118Z,1513277581.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:01.522Z,1513277581.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:01.923Z,1513277581.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:02.333Z,1513277582.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:02.722Z,1513277582.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:03.139Z,1513277583.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:03.540Z,1513277583.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:03.917Z,1513277583.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:04.331Z,1513277584.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:04.743Z,1513277584.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:05.127Z,1513277585.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:05.527Z,1513277585.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:05.988Z,1513277585.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:06.443Z,1513277586.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:06.793Z,1513277586.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:07.109Z,1513277587.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:07.548Z,1513277587.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:07.986Z,1513277587.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:08.367Z,1513277588.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:08.713Z,1513277588.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:09.115Z,1513277589.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:09.511Z,1513277589.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:09.995Z,1513277589.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:10.344Z,1513277590.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:10.712Z,1513277590.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:11.115Z,1513277591.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:11.485Z,1513277591.485 [NAL9602](INFO): NAL9602 initialized
2017-12-14T18:53:11.516Z,1513277591.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:11.995Z,1513277591.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:12.328Z,1513277592.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:12.759Z,1513277592.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:13.140Z,1513277593.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:16.656Z,1513277596.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:16.790Z,1513277596.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:17.175Z,1513277597.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:17.583Z,1513277597.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:17.973Z,1513277597.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:18.383Z,1513277598.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:18.752Z,1513277598.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:19.211Z,1513277599.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:19.567Z,1513277599.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:19.995Z,1513277599.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:20.374Z,1513277600.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:20.764Z,1513277600.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:21.173Z,1513277601.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:21.578Z,1513277601.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:22.005Z,1513277602.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:22.386Z,1513277602.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:22.769Z,1513277602.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:23.179Z,1513277603.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:23.582Z,1513277603.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:24.007Z,1513277604.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:24.375Z,1513277604.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:24.762Z,1513277604.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:25.163Z,1513277605.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:25.575Z,1513277605.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:26.004Z,1513277606.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:26.392Z,1513277606.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:26.774Z,1513277606.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:27.191Z,1513277607.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:27.559Z,1513277607.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:28.019Z,1513277608.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:28.394Z,1513277608.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:28.806Z,1513277608.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:29.167Z,1513277609.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:29.653Z,1513277609.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:30.006Z,1513277610.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:30.359Z,1513277610.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:30.806Z,1513277610.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:31.156Z,1513277611.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:31.568Z,1513277611.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:31.964Z,1513277611.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:32.380Z,1513277612.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:32.800Z,1513277612.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:33.174Z,1513277613.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:33.570Z,1513277613.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:33.990Z,1513277613.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:34.386Z,1513277614.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:34.767Z,1513277614.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:35.151Z,1513277615.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:35.578Z,1513277615.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:36.047Z,1513277616.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:36.378Z,1513277616.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:36.755Z,1513277616.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:37.158Z,1513277617.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:37.579Z,1513277617.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:37.992Z,1513277617.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:38.379Z,1513277618.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:38.747Z,1513277618.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x15845 got:0x15878
2017-12-14T18:53:38.775Z,1513277618.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:39.224Z,1513277619.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:39.555Z,1513277619.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:40.055Z,1513277620.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:40.382Z,1513277620.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:40.766Z,1513277620.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:41.164Z,1513277621.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:41.580Z,1513277621.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:42.022Z,1513277622.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:42.412Z,1513277622.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:42.768Z,1513277622.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:43.170Z,1513277623.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:43.575Z,1513277623.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:43.976Z,1513277623.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:44.375Z,1513277624.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:44.796Z,1513277624.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:45.163Z,1513277625.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:45.603Z,1513277625.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:45.991Z,1513277625.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:46.363Z,1513277626.363 [PNI_TCM](ERROR): CRC does not match. Expected:0x60305 got:0x7490
2017-12-14T18:53:46.385Z,1513277626.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:46.771Z,1513277626.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:47.160Z,1513277627.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:47.572Z,1513277627.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:47.992Z,1513277627.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:48.366Z,1513277628.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:48.774Z,1513277628.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:49.148Z,1513277629.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:49.563Z,1513277629.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:49.996Z,1513277629.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:50.380Z,1513277630.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:50.759Z,1513277630.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:51.176Z,1513277631.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:51.572Z,1513277631.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:52.011Z,1513277632.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:52.413Z,1513277632.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:52.810Z,1513277632.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:53.168Z,1513277633.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:53.591Z,1513277633.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:53.991Z,1513277633.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:54.376Z,1513277634.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:54.768Z,1513277634.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:55.176Z,1513277635.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:55.606Z,1513277635.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:56.034Z,1513277636.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:56.379Z,1513277636.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:56.779Z,1513277636.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:57.146Z,1513277637.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:57.577Z,1513277637.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:57.971Z,1513277637.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:58.399Z,1513277638.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:58.774Z,1513277638.774 [PNI_TCM](ERROR): CRC does not match. Expected:0x37848 got:0x49152
2017-12-14T18:53:58.803Z,1513277638.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:59.166Z,1513277639.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:59.579Z,1513277639.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:53:59.979Z,1513277639.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:00.371Z,1513277640.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:00.739Z,1513277640.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:01.183Z,1513277641.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:01.578Z,1513277641.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:02.062Z,1513277642.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:02.378Z,1513277642.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:02.767Z,1513277642.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:03.161Z,1513277643.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:03.565Z,1513277643.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:03.993Z,1513277643.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:04.377Z,1513277644.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:04.782Z,1513277644.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:05.172Z,1513277645.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:05.567Z,1513277645.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:05.995Z,1513277645.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:06.384Z,1513277646.384 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:06.385Z,1513277646.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 366
2017-12-14T18:54:06.385Z,1513277646.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:54:06.387Z,1513277646.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:06.387Z,1513277646.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 366
2017-12-14T18:54:06.387Z,1513277646.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:54:06.389Z,1513277646.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:06.389Z,1513277646.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 366
2017-12-14T18:54:06.389Z,1513277646.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:54:06.401Z,1513277646.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:54:06.401Z,1513277646.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:54:06.401Z,1513277646.401 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:54:06.769Z,1513277646.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:54:06.769Z,1513277646.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 366
2017-12-14T18:54:06.770Z,1513277646.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:54:06.770Z,1513277646.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 366
2017-12-14T18:54:06.770Z,1513277646.770 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:54:06.770Z,1513277646.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 366
2017-12-14T18:54:07.159Z,1513277647.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:54:07.159Z,1513277647.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:54:07.160Z,1513277647.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:54:07.160Z,1513277647.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:54:07.160Z,1513277647.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:54:07.161Z,1513277647.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:54:07.161Z,1513277647.161 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:54:07.162Z,1513277647.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:54:07.162Z,1513277647.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:54:07.571Z,1513277647.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:07.990Z,1513277647.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:08.401Z,1513277648.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:08.767Z,1513277648.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:09.163Z,1513277649.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:09.591Z,1513277649.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:10.019Z,1513277650.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:10.419Z,1513277650.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:10.767Z,1513277650.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:11.169Z,1513277651.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:11.615Z,1513277651.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:11.991Z,1513277651.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:12.379Z,1513277652.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:12.759Z,1513277652.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:13.223Z,1513277653.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:16.673Z,1513277656.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:16.819Z,1513277656.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:17.199Z,1513277657.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:17.578Z,1513277657.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:18.035Z,1513277658.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:18.383Z,1513277658.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:18.751Z,1513277658.751 [PNI_TCM](ERROR): CRC does not match. Expected:0x36693 got:0x15862
2017-12-14T18:54:18.781Z,1513277658.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:19.184Z,1513277659.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:19.568Z,1513277659.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:19.989Z,1513277659.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:20.359Z,1513277660.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:20.755Z,1513277660.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:21.173Z,1513277661.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:21.553Z,1513277661.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:22.019Z,1513277662.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:22.382Z,1513277662.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:22.744Z,1513277662.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:23.150Z,1513277663.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:23.559Z,1513277663.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:24.046Z,1513277664.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:24.371Z,1513277664.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:24.757Z,1513277664.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:25.152Z,1513277665.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:25.561Z,1513277665.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:25.966Z,1513277665.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:26.402Z,1513277666.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:26.794Z,1513277666.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:27.156Z,1513277667.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:27.567Z,1513277667.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:27.967Z,1513277667.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:28.361Z,1513277668.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:28.774Z,1513277668.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:29.151Z,1513277669.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:29.565Z,1513277669.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:29.994Z,1513277669.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:30.388Z,1513277670.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:30.751Z,1513277670.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:31.183Z,1513277671.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:31.563Z,1513277671.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:31.985Z,1513277671.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:32.382Z,1513277672.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:32.755Z,1513277672.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:33.155Z,1513277673.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:33.586Z,1513277673.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:33.982Z,1513277673.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:34.388Z,1513277674.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:34.771Z,1513277674.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:35.174Z,1513277675.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:35.567Z,1513277675.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:35.994Z,1513277675.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:36.360Z,1513277676.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:36.748Z,1513277676.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:37.149Z,1513277677.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:37.599Z,1513277677.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:38.047Z,1513277678.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:38.430Z,1513277678.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:38.769Z,1513277678.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:39.141Z,1513277679.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:39.599Z,1513277679.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:39.977Z,1513277679.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:40.419Z,1513277680.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:40.797Z,1513277680.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:41.174Z,1513277681.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:41.576Z,1513277681.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:41.948Z,1513277681.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:42.366Z,1513277682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:42.756Z,1513277682.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:43.207Z,1513277683.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:43.570Z,1513277683.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:43.999Z,1513277683.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:44.366Z,1513277684.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:44.765Z,1513277684.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:45.148Z,1513277685.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:45.566Z,1513277685.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:45.988Z,1513277685.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:46.381Z,1513277686.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:46.747Z,1513277686.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:47.147Z,1513277687.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:47.580Z,1513277687.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:47.993Z,1513277687.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:48.398Z,1513277688.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:48.791Z,1513277688.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:49.157Z,1513277689.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:49.570Z,1513277689.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:49.976Z,1513277689.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:50.367Z,1513277690.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:50.758Z,1513277690.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:51.151Z,1513277691.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:51.567Z,1513277691.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:52.022Z,1513277692.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:52.360Z,1513277692.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:52.751Z,1513277692.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:53.160Z,1513277693.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:53.599Z,1513277693.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:53.991Z,1513277693.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:54.395Z,1513277694.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:54.767Z,1513277694.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:55.169Z,1513277695.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:55.565Z,1513277695.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:55.978Z,1513277695.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:56.377Z,1513277696.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:56.780Z,1513277696.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:57.159Z,1513277697.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:57.582Z,1513277697.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:57.983Z,1513277697.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:58.383Z,1513277698.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:58.756Z,1513277698.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:59.159Z,1513277699.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:54:59.556Z,1513277699.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:00.045Z,1513277700.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:00.359Z,1513277700.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:00.802Z,1513277700.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:01.147Z,1513277701.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:01.564Z,1513277701.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:02.015Z,1513277702.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:02.383Z,1513277702.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:02.782Z,1513277702.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:03.146Z,1513277703.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:03.562Z,1513277703.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:03.988Z,1513277703.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:04.392Z,1513277704.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:04.755Z,1513277704.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:05.160Z,1513277705.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:05.573Z,1513277705.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:06.021Z,1513277706.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:06.409Z,1513277706.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:06.766Z,1513277706.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:07.156Z,1513277707.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:07.566Z,1513277707.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:07.964Z,1513277707.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:08.376Z,1513277708.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:08.765Z,1513277708.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:09.136Z,1513277709.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:09.583Z,1513277709.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:09.983Z,1513277709.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:10.387Z,1513277710.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:10.764Z,1513277710.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:11.172Z,1513277711.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:11.570Z,1513277711.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:11.983Z,1513277711.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:12.356Z,1513277712.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:12.788Z,1513277712.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:12.796Z,1513277712.796 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T18:50:12.4Z
2017-12-14T18:55:12.796Z,1513277712.796 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T18:55:12.796Z,1513277712.796 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T18:55:13.168Z,1513277713.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:14.023Z,1513277714.023 [PNI_TCM](ERROR): CRC does not match. Expected:0x4102 got:0x26652
2017-12-14T18:55:14.024Z,1513277714.024 [PNI_TCM](ERROR): CRC does not match. Expected:0x60499 got:0x31260
2017-12-14T18:55:14.048Z,1513277714.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:17.198Z,1513277717.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:17.282Z,1513277717.282 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171214T002839/Courier0424.lzma
2017-12-14T18:55:17.351Z,1513277717.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:17.675Z,1513277717.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:18.028Z,1513277718.028 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0424.lzma.bak
2017-12-14T18:55:18.028Z,1513277718.028 [DataOverHttps](INFO): SBD MOMSN=5439400
2017-12-14T18:55:18.092Z,1513277718.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:19.328Z,1513277719.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:19.482Z,1513277719.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:23.082Z,1513277723.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:23.229Z,1513277723.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:23.607Z,1513277723.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:23.975Z,1513277723.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:24.395Z,1513277724.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:24.790Z,1513277724.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:28.294Z,1513277728.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:28.370Z,1513277728.370 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20171214T002839/Express0425.lzma
2017-12-14T18:55:28.442Z,1513277728.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:28.808Z,1513277728.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:29.124Z,1513277729.124 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0425.lzma.bak
2017-12-14T18:55:29.124Z,1513277729.124 [DataOverHttps](INFO): SBD MOMSN=5439403
2017-12-14T18:55:29.193Z,1513277729.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:30.422Z,1513277730.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:30.446Z,1513277730.446 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T18:55:30.446Z,1513277730.446 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T18:55:30.446Z,1513277730.446 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T18:55:30.548Z,1513277730.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:34.016Z,1513277734.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:34.152Z,1513277734.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:34.520Z,1513277734.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:34.921Z,1513277734.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:35.303Z,1513277735.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:35.699Z,1513277735.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:36.140Z,1513277736.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:36.552Z,1513277736.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:36.927Z,1513277736.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:37.320Z,1513277737.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:37.727Z,1513277737.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:38.114Z,1513277738.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:38.522Z,1513277738.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:38.917Z,1513277738.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:39.321Z,1513277739.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:39.726Z,1513277739.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:40.123Z,1513277740.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:40.527Z,1513277740.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:40.924Z,1513277740.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:41.316Z,1513277741.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:41.731Z,1513277741.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:42.130Z,1513277742.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:42.524Z,1513277742.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:42.926Z,1513277742.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:43.339Z,1513277743.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:43.718Z,1513277743.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:44.114Z,1513277744.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:44.515Z,1513277744.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:44.927Z,1513277744.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:45.363Z,1513277745.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:45.739Z,1513277745.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:46.132Z,1513277746.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:46.523Z,1513277746.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:46.920Z,1513277746.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:47.335Z,1513277747.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:47.724Z,1513277747.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:48.139Z,1513277748.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:48.563Z,1513277748.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:48.922Z,1513277748.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:49.359Z,1513277749.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:49.720Z,1513277749.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:50.127Z,1513277750.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:50.526Z,1513277750.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:50.927Z,1513277750.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:51.376Z,1513277751.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:51.724Z,1513277751.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:52.119Z,1513277752.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:52.515Z,1513277752.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:52.915Z,1513277752.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:53.323Z,1513277753.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:53.731Z,1513277753.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:54.134Z,1513277754.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:54.531Z,1513277754.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:54.961Z,1513277754.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:55.315Z,1513277755.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:55.719Z,1513277755.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:56.127Z,1513277756.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:56.514Z,1513277756.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:56.927Z,1513277756.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:57.324Z,1513277757.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:57.724Z,1513277757.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:58.113Z,1513277758.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:58.536Z,1513277758.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:58.916Z,1513277758.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:59.459Z,1513277759.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:55:59.723Z,1513277759.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:00.124Z,1513277760.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:00.524Z,1513277760.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:00.916Z,1513277760.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:01.360Z,1513277761.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:01.710Z,1513277761.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:02.120Z,1513277762.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:02.519Z,1513277762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:02.927Z,1513277762.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:03.327Z,1513277763.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:03.731Z,1513277763.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:04.109Z,1513277764.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:04.515Z,1513277764.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:04.984Z,1513277764.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:05.316Z,1513277765.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:05.727Z,1513277765.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:06.160Z,1513277766.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:06.541Z,1513277766.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:06.953Z,1513277766.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:07.324Z,1513277767.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:07.711Z,1513277767.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:08.119Z,1513277768.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:08.504Z,1513277768.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:08.951Z,1513277768.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:09.344Z,1513277769.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:09.723Z,1513277769.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:10.108Z,1513277770.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:10.520Z,1513277770.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:10.958Z,1513277770.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:11.319Z,1513277771.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:11.761Z,1513277771.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:12.126Z,1513277772.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:12.563Z,1513277772.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:12.960Z,1513277772.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:13.320Z,1513277773.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:13.721Z,1513277773.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:14.158Z,1513277774.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:14.521Z,1513277774.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:14.935Z,1513277774.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:15.335Z,1513277775.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:15.731Z,1513277775.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:16.127Z,1513277776.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:16.540Z,1513277776.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:16.923Z,1513277776.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:17.373Z,1513277777.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:17.745Z,1513277777.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:18.133Z,1513277778.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:18.550Z,1513277778.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:18.919Z,1513277778.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:19.320Z,1513277779.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:19.723Z,1513277779.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:20.253Z,1513277780.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:20.647Z,1513277780.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:20.923Z,1513277780.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:21.319Z,1513277781.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:21.725Z,1513277781.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:22.127Z,1513277782.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:22.527Z,1513277782.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:22.923Z,1513277782.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:23.320Z,1513277783.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:23.730Z,1513277783.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:24.148Z,1513277784.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:24.552Z,1513277784.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:24.907Z,1513277784.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:25.309Z,1513277785.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:25.708Z,1513277785.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:26.132Z,1513277786.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:26.539Z,1513277786.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:26.951Z,1513277786.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:27.359Z,1513277787.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:27.716Z,1513277787.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:28.176Z,1513277788.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:28.602Z,1513277788.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:28.950Z,1513277788.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:29.342Z,1513277789.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:29.774Z,1513277789.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:30.143Z,1513277790.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:30.552Z,1513277790.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:30.932Z,1513277790.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:38.317Z,1513277798.317 [BPC1](ERROR): Failed to receive battery data
2017-12-14T18:56:38.317Z,1513277798.317 [BPC1] Communications Fault, FailCount= 1
2017-12-14T18:56:38.317Z,1513277798.317 [BPC1](ERROR): Communications Fault
2017-12-14T18:56:38.364Z,1513277798.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:38.418Z,1513277798.418 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T18:56:38.506Z,1513277798.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:38.907Z,1513277798.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:39.312Z,1513277799.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:39.353Z,1513277799.353 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:56:39.353Z,1513277799.353 [BPC1] No Fault, FailCount= 1
2017-12-14T18:56:39.779Z,1513277799.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:40.155Z,1513277800.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:40.510Z,1513277800.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:40.896Z,1513277800.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:41.294Z,1513277801.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:41.715Z,1513277801.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:42.099Z,1513277802.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:42.516Z,1513277802.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:42.930Z,1513277802.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:43.310Z,1513277803.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:43.679Z,1513277803.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:44.100Z,1513277804.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:44.479Z,1513277804.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:44.892Z,1513277804.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:45.303Z,1513277805.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:45.704Z,1513277805.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:46.090Z,1513277806.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:46.524Z,1513277806.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:46.905Z,1513277806.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:47.295Z,1513277807.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:47.703Z,1513277807.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:48.140Z,1513277808.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:48.513Z,1513277808.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:48.910Z,1513277808.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:49.309Z,1513277809.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:49.704Z,1513277809.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:50.111Z,1513277810.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:50.495Z,1513277810.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:50.908Z,1513277810.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:51.295Z,1513277811.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:51.696Z,1513277811.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:52.088Z,1513277812.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:52.492Z,1513277812.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:52.899Z,1513277812.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:53.303Z,1513277813.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:53.704Z,1513277813.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:54.103Z,1513277814.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:54.497Z,1513277814.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:54.911Z,1513277814.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:55.281Z,1513277815.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:55.672Z,1513277815.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:56.087Z,1513277816.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:56.518Z,1513277816.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:56.895Z,1513277816.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:57.295Z,1513277817.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:57.689Z,1513277817.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:58.066Z,1513277818.066 [BPC1](ERROR): Failed to parse message.
2017-12-14T18:56:58.067Z,1513277818.067 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-14T18:56:58.067Z,1513277818.067 [BPC1] Data Fault, FailCount= 2
2017-12-14T18:56:58.067Z,1513277818.067 [BPC1](ERROR): Data Fault
2017-12-14T18:56:58.079Z,1513277818.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:58.093Z,1513277818.093 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:56:58.478Z,1513277818.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:58.876Z,1513277818.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:59.277Z,1513277819.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:56:59.290Z,1513277819.290 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:56:59.290Z,1513277819.290 [BPC1] No Fault, FailCount= 2
2017-12-14T18:56:59.787Z,1513277819.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:00.095Z,1513277820.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:00.486Z,1513277820.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:00.882Z,1513277820.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:01.282Z,1513277821.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:01.681Z,1513277821.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:02.082Z,1513277822.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:02.483Z,1513277822.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:02.951Z,1513277822.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:03.295Z,1513277823.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:03.743Z,1513277823.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:04.080Z,1513277824.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:04.483Z,1513277824.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:04.883Z,1513277824.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:05.280Z,1513277825.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:05.693Z,1513277825.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:06.111Z,1513277826.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:06.503Z,1513277826.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:06.887Z,1513277826.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:07.327Z,1513277827.327 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:07.328Z,1513277827.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 367
2017-12-14T18:57:07.328Z,1513277827.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T18:57:07.330Z,1513277827.330 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:07.330Z,1513277827.330 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 367
2017-12-14T18:57:07.330Z,1513277827.330 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T18:57:07.332Z,1513277827.332 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:07.332Z,1513277827.332 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 367
2017-12-14T18:57:07.332Z,1513277827.332 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T18:57:07.344Z,1513277827.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T18:57:07.344Z,1513277827.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T18:57:07.344Z,1513277827.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T18:57:07.713Z,1513277827.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T18:57:07.713Z,1513277827.713 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 367
2017-12-14T18:57:07.713Z,1513277827.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T18:57:07.714Z,1513277827.714 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 367
2017-12-14T18:57:07.714Z,1513277827.714 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T18:57:07.714Z,1513277827.714 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 367
2017-12-14T18:57:08.117Z,1513277828.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T18:57:08.117Z,1513277828.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:57:08.118Z,1513277828.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:57:08.118Z,1513277828.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T18:57:08.119Z,1513277828.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:57:08.119Z,1513277828.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:57:08.119Z,1513277828.119 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T18:57:08.120Z,1513277828.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T18:57:08.120Z,1513277828.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T18:57:08.479Z,1513277828.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:08.883Z,1513277828.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:09.300Z,1513277829.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:09.685Z,1513277829.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:10.079Z,1513277830.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:10.478Z,1513277830.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:10.886Z,1513277830.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:11.276Z,1513277831.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:11.689Z,1513277831.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:12.087Z,1513277832.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:12.530Z,1513277832.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:12.880Z,1513277832.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:13.306Z,1513277833.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:13.681Z,1513277833.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:14.095Z,1513277834.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:14.479Z,1513277834.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:14.884Z,1513277834.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:15.294Z,1513277835.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:15.694Z,1513277835.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:16.087Z,1513277836.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:16.499Z,1513277836.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:16.879Z,1513277836.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:17.285Z,1513277837.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:17.694Z,1513277837.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:18.092Z,1513277838.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:18.495Z,1513277838.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:18.939Z,1513277838.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:19.286Z,1513277839.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:19.700Z,1513277839.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:20.127Z,1513277840.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:20.479Z,1513277840.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:20.918Z,1513277840.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:21.287Z,1513277841.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:21.718Z,1513277841.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:22.122Z,1513277842.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:22.476Z,1513277842.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:22.877Z,1513277842.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:23.273Z,1513277843.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:23.682Z,1513277843.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:24.080Z,1513277844.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:24.487Z,1513277844.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:24.877Z,1513277844.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:25.323Z,1513277845.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:25.679Z,1513277845.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:26.087Z,1513277846.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:26.488Z,1513277846.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:26.898Z,1513277846.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:27.296Z,1513277847.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:27.700Z,1513277847.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:28.095Z,1513277848.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:28.515Z,1513277848.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:28.880Z,1513277848.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:29.328Z,1513277849.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:29.708Z,1513277849.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:30.119Z,1513277850.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:30.511Z,1513277850.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:30.872Z,1513277850.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:31.276Z,1513277851.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:34.780Z,1513277854.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:34.963Z,1513277854.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:35.328Z,1513277855.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:35.730Z,1513277855.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:36.124Z,1513277856.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:36.523Z,1513277856.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:36.924Z,1513277856.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:37.321Z,1513277857.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:37.727Z,1513277857.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:38.170Z,1513277858.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:38.528Z,1513277858.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:38.927Z,1513277858.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:39.323Z,1513277859.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:39.741Z,1513277859.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:40.127Z,1513277860.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:40.527Z,1513277860.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:40.931Z,1513277860.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:41.374Z,1513277861.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:41.796Z,1513277861.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:42.125Z,1513277862.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:42.548Z,1513277862.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:42.928Z,1513277862.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:43.307Z,1513277863.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:43.774Z,1513277863.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:44.130Z,1513277864.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:44.596Z,1513277864.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:44.916Z,1513277864.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:45.315Z,1513277865.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:45.715Z,1513277865.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:46.119Z,1513277866.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:46.514Z,1513277866.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:46.945Z,1513277866.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:47.318Z,1513277867.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:47.775Z,1513277867.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:48.119Z,1513277868.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:48.513Z,1513277868.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:48.914Z,1513277868.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:49.315Z,1513277869.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:49.743Z,1513277869.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:50.224Z,1513277870.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:50.520Z,1513277870.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:50.916Z,1513277870.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:51.320Z,1513277871.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:51.788Z,1513277871.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:52.131Z,1513277872.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:52.515Z,1513277872.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:52.963Z,1513277872.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:53.329Z,1513277873.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:53.729Z,1513277873.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:54.166Z,1513277874.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:54.531Z,1513277874.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:54.918Z,1513277874.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:55.319Z,1513277875.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:55.732Z,1513277875.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:56.126Z,1513277876.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:56.543Z,1513277876.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:56.927Z,1513277876.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:57.365Z,1513277877.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:57.717Z,1513277877.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:58.263Z,1513277878.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:58.510Z,1513277878.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:58.936Z,1513277878.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:59.340Z,1513277879.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:57:59.740Z,1513277879.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:00.118Z,1513277880.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:00.563Z,1513277880.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:00.923Z,1513277880.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:01.316Z,1513277881.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:01.743Z,1513277881.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:02.149Z,1513277882.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:02.522Z,1513277882.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:02.924Z,1513277882.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:03.317Z,1513277883.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:03.749Z,1513277883.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:04.110Z,1513277884.110 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T18:58:04.110Z,1513277884.110 [BPC1] Data Fault, FailCount= 1
2017-12-14T18:58:04.111Z,1513277884.111 [BPC1](ERROR): Data Fault
2017-12-14T18:58:04.119Z,1513277884.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:04.133Z,1513277884.133 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T18:58:04.534Z,1513277884.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:04.928Z,1513277884.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:05.334Z,1513277885.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:05.363Z,1513277885.363 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T18:58:05.364Z,1513277885.364 [BPC1] No Fault, FailCount= 1
2017-12-14T18:58:05.783Z,1513277885.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:06.117Z,1513277886.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:06.527Z,1513277886.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:06.933Z,1513277886.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:07.316Z,1513277887.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:07.832Z,1513277887.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:08.124Z,1513277888.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:08.524Z,1513277888.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:08.923Z,1513277888.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:09.319Z,1513277889.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:09.718Z,1513277889.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:10.165Z,1513277890.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:10.527Z,1513277890.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:10.931Z,1513277890.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:11.339Z,1513277891.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:11.730Z,1513277891.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:12.116Z,1513277892.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:12.520Z,1513277892.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:12.917Z,1513277892.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:13.312Z,1513277893.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:13.740Z,1513277893.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:14.163Z,1513277894.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:14.532Z,1513277894.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:14.923Z,1513277894.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:15.320Z,1513277895.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:15.720Z,1513277895.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:16.116Z,1513277896.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:16.566Z,1513277896.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:16.924Z,1513277896.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:17.328Z,1513277897.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:17.728Z,1513277897.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:18.116Z,1513277898.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:18.524Z,1513277898.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:18.915Z,1513277898.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:19.320Z,1513277899.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:19.763Z,1513277899.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:20.135Z,1513277900.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:20.535Z,1513277900.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:20.927Z,1513277900.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:21.310Z,1513277901.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:21.735Z,1513277901.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:22.139Z,1513277902.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:22.515Z,1513277902.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:22.943Z,1513277902.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:23.320Z,1513277903.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:23.720Z,1513277903.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:24.115Z,1513277904.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:24.519Z,1513277904.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:24.916Z,1513277904.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:25.312Z,1513277905.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:25.728Z,1513277905.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:26.327Z,1513277906.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:26.534Z,1513277906.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:26.950Z,1513277906.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:27.307Z,1513277907.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:27.751Z,1513277907.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:28.134Z,1513277908.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:28.510Z,1513277908.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:28.939Z,1513277908.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:29.343Z,1513277909.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:29.739Z,1513277909.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:30.112Z,1513277910.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:30.518Z,1513277910.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:30.917Z,1513277910.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:31.339Z,1513277911.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:34.814Z,1513277914.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:34.963Z,1513277914.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:35.316Z,1513277915.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:35.755Z,1513277915.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:36.143Z,1513277916.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:36.507Z,1513277916.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:36.913Z,1513277916.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:37.317Z,1513277917.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:37.717Z,1513277917.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:38.111Z,1513277918.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:38.508Z,1513277918.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:38.912Z,1513277918.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:39.312Z,1513277919.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:39.718Z,1513277919.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:40.142Z,1513277920.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:40.527Z,1513277920.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:40.916Z,1513277920.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:41.313Z,1513277921.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:41.712Z,1513277921.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:42.109Z,1513277922.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:42.519Z,1513277922.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:42.968Z,1513277922.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:43.321Z,1513277923.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:43.720Z,1513277923.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:44.114Z,1513277924.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:44.519Z,1513277924.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:44.914Z,1513277924.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:45.320Z,1513277925.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:45.727Z,1513277925.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:46.162Z,1513277926.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:46.525Z,1513277926.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:46.916Z,1513277926.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:47.324Z,1513277927.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:47.748Z,1513277927.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:48.143Z,1513277928.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:48.514Z,1513277928.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:48.950Z,1513277928.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:49.316Z,1513277929.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:49.755Z,1513277929.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:50.108Z,1513277930.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:50.511Z,1513277930.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:50.915Z,1513277930.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:51.312Z,1513277931.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:51.720Z,1513277931.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:52.120Z,1513277932.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:52.544Z,1513277932.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:52.914Z,1513277932.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:53.313Z,1513277933.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:53.719Z,1513277933.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:54.113Z,1513277934.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:54.512Z,1513277934.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:54.921Z,1513277934.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:55.331Z,1513277935.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:55.757Z,1513277935.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:56.115Z,1513277936.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:56.515Z,1513277936.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:56.918Z,1513277936.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:57.314Z,1513277937.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:57.720Z,1513277937.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:58.155Z,1513277938.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:58.533Z,1513277938.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:58.915Z,1513277938.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:59.316Z,1513277939.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:58:59.720Z,1513277939.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:00.118Z,1513277940.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:00.514Z,1513277940.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:00.928Z,1513277940.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:01.326Z,1513277941.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:01.724Z,1513277941.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:02.172Z,1513277942.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:02.499Z,1513277942.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:02.948Z,1513277942.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:03.299Z,1513277943.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:03.731Z,1513277943.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:04.125Z,1513277944.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:04.535Z,1513277944.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:04.915Z,1513277944.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:05.347Z,1513277945.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:05.708Z,1513277945.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:06.103Z,1513277946.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:06.532Z,1513277946.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:06.932Z,1513277946.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:07.335Z,1513277947.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:07.716Z,1513277947.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:08.105Z,1513277948.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:08.581Z,1513277948.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:08.937Z,1513277948.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:09.304Z,1513277949.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:09.754Z,1513277949.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:10.163Z,1513277950.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:10.536Z,1513277950.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:10.908Z,1513277950.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:11.339Z,1513277951.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:11.752Z,1513277951.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:12.135Z,1513277952.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:12.522Z,1513277952.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:12.932Z,1513277952.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:13.322Z,1513277953.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:13.714Z,1513277953.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:14.115Z,1513277954.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:14.518Z,1513277954.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:14.928Z,1513277954.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:15.336Z,1513277955.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:15.746Z,1513277955.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:16.131Z,1513277956.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:16.505Z,1513277956.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:16.907Z,1513277956.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:17.316Z,1513277957.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:17.738Z,1513277957.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:18.147Z,1513277958.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:18.535Z,1513277958.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:18.918Z,1513277958.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:19.316Z,1513277959.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:19.714Z,1513277959.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:20.111Z,1513277960.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:20.556Z,1513277960.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:20.923Z,1513277960.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:21.387Z,1513277961.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:21.722Z,1513277961.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:22.107Z,1513277962.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:22.518Z,1513277962.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:22.912Z,1513277962.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:23.309Z,1513277963.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:23.728Z,1513277963.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:24.121Z,1513277964.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:24.532Z,1513277964.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:24.918Z,1513277964.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:25.318Z,1513277965.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:25.715Z,1513277965.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:26.127Z,1513277966.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:26.519Z,1513277966.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:26.935Z,1513277966.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:27.331Z,1513277967.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:27.739Z,1513277967.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:28.132Z,1513277968.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:28.523Z,1513277968.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:28.917Z,1513277968.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:29.307Z,1513277969.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:29.735Z,1513277969.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:30.124Z,1513277970.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:30.530Z,1513277970.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:30.930Z,1513277970.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:30.952Z,1513277970.952 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T18:59:31.308Z,1513277971.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:31.710Z,1513277971.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:35.215Z,1513277975.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:35.319Z,1513277975.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:35.708Z,1513277975.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:36.135Z,1513277976.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:36.518Z,1513277976.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:36.923Z,1513277976.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:37.309Z,1513277977.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:37.710Z,1513277977.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:38.108Z,1513277978.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:38.502Z,1513277978.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:38.919Z,1513277978.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:39.319Z,1513277979.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:39.719Z,1513277979.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:40.112Z,1513277980.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:40.539Z,1513277980.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:40.899Z,1513277980.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:41.299Z,1513277981.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:41.710Z,1513277981.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:42.105Z,1513277982.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:42.500Z,1513277982.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:42.898Z,1513277982.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:43.301Z,1513277983.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:43.731Z,1513277983.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:44.103Z,1513277984.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:44.502Z,1513277984.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:44.915Z,1513277984.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:45.336Z,1513277985.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:45.715Z,1513277985.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:46.100Z,1513277986.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:46.505Z,1513277986.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:46.908Z,1513277986.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:47.295Z,1513277987.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:47.703Z,1513277987.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:48.136Z,1513277988.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:48.510Z,1513277988.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:48.912Z,1513277988.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:49.305Z,1513277989.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:49.711Z,1513277989.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:50.106Z,1513277990.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:50.504Z,1513277990.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:50.920Z,1513277990.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:51.319Z,1513277991.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:51.716Z,1513277991.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:52.107Z,1513277992.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:52.507Z,1513277992.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:52.907Z,1513277992.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:53.309Z,1513277993.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:53.709Z,1513277993.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:54.132Z,1513277994.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:54.523Z,1513277994.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:54.916Z,1513277994.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:55.289Z,1513277995.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:55.715Z,1513277995.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:56.098Z,1513277996.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:56.491Z,1513277996.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:56.918Z,1513277996.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:57.400Z,1513277997.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:57.708Z,1513277997.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:58.135Z,1513277998.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:58.512Z,1513277998.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:58.931Z,1513277998.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:59.302Z,1513277999.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T18:59:59.708Z,1513277999.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:00.107Z,1513278000.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:00.515Z,1513278000.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:00.908Z,1513278000.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:01.303Z,1513278001.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:01.704Z,1513278001.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:02.098Z,1513278002.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:02.503Z,1513278002.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:02.911Z,1513278002.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:03.311Z,1513278003.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:03.762Z,1513278003.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:04.098Z,1513278004.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:04.507Z,1513278004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:04.903Z,1513278004.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:05.302Z,1513278005.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:05.719Z,1513278005.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:06.119Z,1513278006.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:06.511Z,1513278006.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:06.949Z,1513278006.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:07.340Z,1513278007.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:07.703Z,1513278007.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:08.107Z,1513278008.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:08.507Z,1513278008.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:08.507Z,1513278008.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 368
2017-12-14T19:00:08.507Z,1513278008.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:00:08.508Z,1513278008.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:08.509Z,1513278008.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 368
2017-12-14T19:00:08.509Z,1513278008.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:00:08.511Z,1513278008.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:08.511Z,1513278008.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 368
2017-12-14T19:00:08.511Z,1513278008.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:00:08.547Z,1513278008.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:00:08.547Z,1513278008.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:00:08.548Z,1513278008.548 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:00:08.923Z,1513278008.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:00:08.923Z,1513278008.923 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 368
2017-12-14T19:00:08.923Z,1513278008.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:00:08.923Z,1513278008.923 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 368
2017-12-14T19:00:08.924Z,1513278008.924 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:00:08.924Z,1513278008.924 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 368
2017-12-14T19:00:09.312Z,1513278009.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:00:09.313Z,1513278009.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:00:09.313Z,1513278009.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:00:09.314Z,1513278009.314 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:00:09.314Z,1513278009.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:00:09.314Z,1513278009.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:00:09.315Z,1513278009.315 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:00:09.315Z,1513278009.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:00:09.315Z,1513278009.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:00:09.722Z,1513278009.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:10.156Z,1513278010.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:10.506Z,1513278010.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:10.905Z,1513278010.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:11.303Z,1513278011.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:11.709Z,1513278011.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:12.119Z,1513278012.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:12.513Z,1513278012.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:12.907Z,1513278012.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:13.403Z,1513278013.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:13.708Z,1513278013.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:14.110Z,1513278014.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:14.511Z,1513278014.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:14.915Z,1513278014.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:15.311Z,1513278015.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:15.702Z,1513278015.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:16.134Z,1513278016.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:16.508Z,1513278016.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:16.907Z,1513278016.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:17.305Z,1513278017.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:17.714Z,1513278017.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:18.112Z,1513278018.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:18.512Z,1513278018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:18.931Z,1513278018.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:19.311Z,1513278019.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:19.793Z,1513278019.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:20.110Z,1513278020.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:20.543Z,1513278020.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:20.912Z,1513278020.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:21.343Z,1513278021.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:21.712Z,1513278021.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:22.103Z,1513278022.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:22.503Z,1513278022.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:22.900Z,1513278022.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:23.307Z,1513278023.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:23.715Z,1513278023.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:24.112Z,1513278024.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:24.512Z,1513278024.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:24.907Z,1513278024.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:25.300Z,1513278025.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:25.707Z,1513278025.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:26.107Z,1513278026.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:26.501Z,1513278026.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:26.913Z,1513278026.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:27.312Z,1513278027.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:27.714Z,1513278027.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:28.104Z,1513278028.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:28.509Z,1513278028.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:28.901Z,1513278028.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:29.304Z,1513278029.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:29.747Z,1513278029.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:30.257Z,1513278030.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:30.515Z,1513278030.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:30.907Z,1513278030.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:30.910Z,1513278030.910 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T19:00:30.910Z,1513278030.910 [Default:CheckIn:C.Wait] Stopped
2017-12-14T19:00:30.910Z,1513278030.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T19:00:30.910Z,1513278030.910 [Default:CheckIn:D] Running Loop=1
2017-12-14T19:00:31.307Z,1513278031.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:31.311Z,1513278031.311 [Default:CheckIn:D] Stopped
2017-12-14T19:00:31.311Z,1513278031.311 [Default:CheckIn:E] Running Loop=1
2017-12-14T19:00:31.703Z,1513278031.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1107.265365 min 
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn:E] Stopped
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn] Stopped
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn](INFO): Running loop #107
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn] Running Loop=107
2017-12-14T19:00:31.708Z,1513278031.708 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T19:00:31.709Z,1513278031.709 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T19:00:32.111Z,1513278032.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:35.573Z,1513278035.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:35.723Z,1513278035.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:36.080Z,1513278036.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:36.501Z,1513278036.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:36.875Z,1513278036.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:37.275Z,1513278037.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:37.671Z,1513278037.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:38.070Z,1513278038.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:38.468Z,1513278038.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:38.876Z,1513278038.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:39.277Z,1513278039.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:39.720Z,1513278039.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:40.075Z,1513278040.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:40.473Z,1513278040.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:40.874Z,1513278040.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:41.278Z,1513278041.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:41.756Z,1513278041.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:42.096Z,1513278042.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:42.511Z,1513278042.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:42.880Z,1513278042.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:43.303Z,1513278043.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:43.666Z,1513278043.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:44.068Z,1513278044.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:44.483Z,1513278044.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:44.893Z,1513278044.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:45.299Z,1513278045.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:45.699Z,1513278045.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:46.162Z,1513278046.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:46.474Z,1513278046.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:46.872Z,1513278046.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:47.271Z,1513278047.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:47.697Z,1513278047.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:48.080Z,1513278048.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:48.504Z,1513278048.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:48.872Z,1513278048.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:49.278Z,1513278049.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:49.673Z,1513278049.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:50.072Z,1513278050.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:50.473Z,1513278050.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:50.891Z,1513278050.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:51.284Z,1513278051.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:51.715Z,1513278051.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:52.082Z,1513278052.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:52.518Z,1513278052.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:52.870Z,1513278052.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:53.279Z,1513278053.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:53.684Z,1513278053.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:54.076Z,1513278054.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:54.483Z,1513278054.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:54.874Z,1513278054.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:55.275Z,1513278055.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:55.747Z,1513278055.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:56.073Z,1513278056.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:56.474Z,1513278056.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:56.923Z,1513278056.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:57.291Z,1513278057.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:57.691Z,1513278057.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:58.074Z,1513278058.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:58.483Z,1513278058.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:58.968Z,1513278058.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:59.279Z,1513278059.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:00:59.684Z,1513278059.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:00.085Z,1513278060.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:00.495Z,1513278060.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:00.883Z,1513278060.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:01.279Z,1513278061.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:01.673Z,1513278061.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:02.127Z,1513278062.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:02.479Z,1513278062.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:02.891Z,1513278062.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:03.295Z,1513278063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:03.738Z,1513278063.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:04.084Z,1513278064.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:04.479Z,1513278064.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:04.895Z,1513278064.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:05.351Z,1513278065.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:05.727Z,1513278065.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:06.092Z,1513278066.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:06.485Z,1513278066.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:06.863Z,1513278066.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:07.288Z,1513278067.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:07.690Z,1513278067.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:08.078Z,1513278068.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:08.539Z,1513278068.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:08.891Z,1513278068.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:09.291Z,1513278069.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:09.691Z,1513278069.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:10.079Z,1513278070.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:10.473Z,1513278070.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:10.879Z,1513278070.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:11.273Z,1513278071.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:11.743Z,1513278071.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:12.096Z,1513278072.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:12.496Z,1513278072.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:12.873Z,1513278072.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:13.278Z,1513278073.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:13.674Z,1513278073.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:14.118Z,1513278074.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:14.496Z,1513278074.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:14.977Z,1513278074.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:15.302Z,1513278075.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:15.707Z,1513278075.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:16.082Z,1513278076.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:16.511Z,1513278076.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:16.914Z,1513278076.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:17.316Z,1513278077.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:17.703Z,1513278077.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:18.134Z,1513278078.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:18.531Z,1513278078.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:18.891Z,1513278078.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:19.300Z,1513278079.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:19.698Z,1513278079.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:20.097Z,1513278080.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:20.504Z,1513278080.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:20.932Z,1513278080.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:21.299Z,1513278081.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:21.758Z,1513278081.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:22.070Z,1513278082.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:22.483Z,1513278082.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:22.924Z,1513278082.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:23.284Z,1513278083.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:23.687Z,1513278083.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:24.185Z,1513278084.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:24.539Z,1513278084.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:24.863Z,1513278084.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:25.307Z,1513278085.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:25.718Z,1513278085.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:26.120Z,1513278086.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:26.492Z,1513278086.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:26.922Z,1513278086.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:27.273Z,1513278087.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:27.762Z,1513278087.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:28.106Z,1513278088.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:28.503Z,1513278088.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:28.892Z,1513278088.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:29.268Z,1513278089.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:29.677Z,1513278089.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:30.084Z,1513278090.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:30.480Z,1513278090.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:30.867Z,1513278090.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:31.271Z,1513278091.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:31.666Z,1513278091.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:32.063Z,1513278092.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:32.467Z,1513278092.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:35.725Z,1513278095.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:35.916Z,1513278095.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:36.200Z,1513278096.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:36.590Z,1513278096.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:36.989Z,1513278096.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:37.395Z,1513278097.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:37.801Z,1513278097.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:38.221Z,1513278098.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:38.600Z,1513278098.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:38.989Z,1513278098.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:39.395Z,1513278099.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:39.788Z,1513278099.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:40.258Z,1513278100.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:40.600Z,1513278100.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:41.007Z,1513278101.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:41.399Z,1513278101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:41.807Z,1513278101.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:42.247Z,1513278102.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:42.596Z,1513278102.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:42.991Z,1513278102.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:43.387Z,1513278103.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:43.807Z,1513278103.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:44.201Z,1513278104.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:44.600Z,1513278104.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:44.995Z,1513278104.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:45.395Z,1513278105.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:45.787Z,1513278105.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:46.184Z,1513278106.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:46.627Z,1513278106.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:47.001Z,1513278107.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:47.400Z,1513278107.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:47.795Z,1513278107.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:48.218Z,1513278108.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:48.590Z,1513278108.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:49.019Z,1513278109.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:49.391Z,1513278109.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:49.871Z,1513278109.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:50.203Z,1513278110.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:50.600Z,1513278110.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:51.079Z,1513278111.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:51.420Z,1513278111.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:51.830Z,1513278111.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:52.245Z,1513278112.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:52.635Z,1513278112.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:53.040Z,1513278113.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:53.423Z,1513278113.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:53.816Z,1513278113.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:54.251Z,1513278114.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:54.603Z,1513278114.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:55.027Z,1513278115.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:55.542Z,1513278115.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:55.819Z,1513278115.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:56.292Z,1513278116.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:56.615Z,1513278116.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:57.016Z,1513278117.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:57.403Z,1513278117.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:57.803Z,1513278117.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:58.227Z,1513278118.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:58.620Z,1513278118.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:59.038Z,1513278119.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:59.428Z,1513278119.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:01:59.940Z,1513278119.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:00.238Z,1513278120.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:00.656Z,1513278120.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:01.017Z,1513278121.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:01.476Z,1513278121.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:01.916Z,1513278121.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:02.224Z,1513278122.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:02.619Z,1513278122.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:03.026Z,1513278123.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:03.429Z,1513278123.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:03.916Z,1513278123.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:04.222Z,1513278124.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:04.614Z,1513278124.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:05.034Z,1513278125.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:05.419Z,1513278125.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:05.796Z,1513278125.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:06.195Z,1513278126.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:06.587Z,1513278126.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:07.032Z,1513278127.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:07.448Z,1513278127.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:07.819Z,1513278127.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:08.298Z,1513278128.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:08.667Z,1513278128.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:09.027Z,1513278129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:09.407Z,1513278129.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:09.820Z,1513278129.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:10.279Z,1513278130.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:10.651Z,1513278130.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:11.023Z,1513278131.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:11.415Z,1513278131.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:11.894Z,1513278131.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:12.217Z,1513278132.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:12.667Z,1513278132.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:12.990Z,1513278132.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:13.428Z,1513278133.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:13.901Z,1513278133.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:14.247Z,1513278134.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:14.607Z,1513278134.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:14.999Z,1513278134.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:15.403Z,1513278135.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:15.910Z,1513278135.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:16.230Z,1513278136.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:16.605Z,1513278136.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:17.012Z,1513278137.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:17.415Z,1513278137.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:17.517Z,1513278137.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:17.978Z,1513278137.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:18.215Z,1513278138.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:18.314Z,1513278138.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:18.617Z,1513278138.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:18.717Z,1513278138.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:19.004Z,1513278139.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:19.414Z,1513278139.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:19.513Z,1513278139.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:19.827Z,1513278139.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:20.220Z,1513278140.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:20.310Z,1513278140.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:20.635Z,1513278140.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:20.714Z,1513278140.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:21.031Z,1513278141.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:21.423Z,1513278141.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:21.510Z,1513278141.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:21.837Z,1513278141.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:22.260Z,1513278142.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:22.306Z,1513278142.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:22.623Z,1513278142.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:22.726Z,1513278142.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:23.015Z,1513278143.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:23.524Z,1513278143.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:23.811Z,1513278143.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:24.305Z,1513278144.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:24.619Z,1513278144.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:25.006Z,1513278145.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:25.402Z,1513278145.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:25.823Z,1513278145.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:26.210Z,1513278146.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:26.617Z,1513278146.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:27.031Z,1513278147.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:27.411Z,1513278147.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:27.795Z,1513278147.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:28.196Z,1513278148.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:28.601Z,1513278148.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:29.007Z,1513278149.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:29.407Z,1513278149.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:29.797Z,1513278149.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:30.227Z,1513278150.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:30.591Z,1513278150.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:31.003Z,1513278151.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:31.400Z,1513278151.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:31.917Z,1513278151.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:32.211Z,1513278152.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:32.623Z,1513278152.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:35.185Z,1513278155.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:35.981Z,1513278155.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:02:36.162Z,1513278156.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:36.358Z,1513278156.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:36.751Z,1513278156.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:37.208Z,1513278157.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:37.590Z,1513278157.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:37.942Z,1513278157.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:38.344Z,1513278158.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:38.746Z,1513278158.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:39.151Z,1513278159.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:39.547Z,1513278159.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:40.022Z,1513278160.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:40.368Z,1513278160.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:40.722Z,1513278160.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:41.124Z,1513278161.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:41.535Z,1513278161.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:41.982Z,1513278161.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:42.358Z,1513278162.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:42.727Z,1513278162.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:43.129Z,1513278163.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:43.536Z,1513278163.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:43.982Z,1513278163.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:44.413Z,1513278164.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:44.748Z,1513278164.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:45.130Z,1513278165.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:45.526Z,1513278165.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:45.988Z,1513278165.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:46.399Z,1513278166.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:46.777Z,1513278166.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:47.135Z,1513278167.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:47.542Z,1513278167.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:48.015Z,1513278168.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:48.363Z,1513278168.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:48.759Z,1513278168.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:49.156Z,1513278169.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:49.576Z,1513278169.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:49.927Z,1513278169.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:50.324Z,1513278170.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:50.725Z,1513278170.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:51.122Z,1513278171.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:51.529Z,1513278171.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:51.948Z,1513278171.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:52.343Z,1513278172.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:52.774Z,1513278172.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:53.124Z,1513278173.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:53.537Z,1513278173.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:53.980Z,1513278173.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:54.374Z,1513278174.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:54.733Z,1513278174.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:55.126Z,1513278175.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:55.564Z,1513278175.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:56.018Z,1513278176.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:56.370Z,1513278176.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:56.731Z,1513278176.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:57.131Z,1513278177.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:57.584Z,1513278177.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:57.980Z,1513278177.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:58.388Z,1513278178.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:58.723Z,1513278178.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:59.175Z,1513278179.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:02:59.535Z,1513278179.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:00.019Z,1513278180.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:00.365Z,1513278180.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:00.723Z,1513278180.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:01.133Z,1513278181.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:01.524Z,1513278181.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:02.016Z,1513278182.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:02.379Z,1513278182.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:02.732Z,1513278182.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:03.132Z,1513278183.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:03.587Z,1513278183.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:03.939Z,1513278183.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:04.335Z,1513278184.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:04.756Z,1513278184.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:05.155Z,1513278185.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:05.585Z,1513278185.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:05.938Z,1513278185.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:06.323Z,1513278186.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:06.727Z,1513278186.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:07.123Z,1513278187.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:07.525Z,1513278187.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:07.993Z,1513278187.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:08.379Z,1513278188.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:08.760Z,1513278188.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:09.127Z,1513278189.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:09.564Z,1513278189.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:09.564Z,1513278189.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 369
2017-12-14T19:03:09.564Z,1513278189.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:03:09.570Z,1513278189.570 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:09.570Z,1513278189.570 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 369
2017-12-14T19:03:09.570Z,1513278189.570 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:03:09.572Z,1513278189.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:09.572Z,1513278189.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 369
2017-12-14T19:03:09.572Z,1513278189.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:03:09.609Z,1513278189.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:03:09.609Z,1513278189.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:03:09.610Z,1513278189.610 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:03:09.997Z,1513278189.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:03:09.997Z,1513278189.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 369
2017-12-14T19:03:09.997Z,1513278189.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:03:09.997Z,1513278189.997 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 369
2017-12-14T19:03:09.998Z,1513278189.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:03:09.998Z,1513278189.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 369
2017-12-14T19:03:10.350Z,1513278190.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:03:10.350Z,1513278190.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:03:10.350Z,1513278190.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:03:10.351Z,1513278190.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:03:10.351Z,1513278190.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:03:10.351Z,1513278190.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:03:10.352Z,1513278190.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:03:10.352Z,1513278190.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:03:10.352Z,1513278190.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:03:10.732Z,1513278190.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:11.131Z,1513278191.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:11.548Z,1513278191.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:12.027Z,1513278192.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:12.343Z,1513278192.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:12.733Z,1513278192.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:13.130Z,1513278193.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:13.490Z,1513278193.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T19:03:13.490Z,1513278193.490 [NAL9602] Data Fault, FailCount= 1
2017-12-14T19:03:13.491Z,1513278193.491 [NAL9602](ERROR): Data Fault
2017-12-14T19:03:13.542Z,1513278193.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:13.572Z,1513278193.572 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T19:03:13.933Z,1513278193.933 [NAL9602](INFO): Powering down
2017-12-14T19:03:13.997Z,1513278193.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:14.351Z,1513278194.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:14.721Z,1513278194.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:14.753Z,1513278194.753 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T19:03:14.753Z,1513278194.753 [NAL9602] No Fault, FailCount= 1
2017-12-14T19:03:15.123Z,1513278195.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:15.525Z,1513278195.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:16.001Z,1513278196.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:16.351Z,1513278196.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:16.731Z,1513278196.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:17.138Z,1513278197.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:17.210Z,1513278197.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:03:17.528Z,1513278197.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:17.932Z,1513278197.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:18.007Z,1513278198.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:03:18.383Z,1513278198.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:18.736Z,1513278198.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:19.159Z,1513278199.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:19.546Z,1513278199.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:19.934Z,1513278199.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:20.343Z,1513278200.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:20.735Z,1513278200.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:21.116Z,1513278201.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:21.635Z,1513278201.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:21.968Z,1513278201.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:22.359Z,1513278202.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:22.721Z,1513278202.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:23.122Z,1513278203.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:23.522Z,1513278203.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:23.972Z,1513278203.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:24.358Z,1513278204.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:24.781Z,1513278204.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:25.123Z,1513278205.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:25.526Z,1513278205.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:25.978Z,1513278205.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:26.356Z,1513278206.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:26.720Z,1513278206.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:27.121Z,1513278207.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:27.525Z,1513278207.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:28.016Z,1513278208.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:28.339Z,1513278208.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:28.725Z,1513278208.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:29.121Z,1513278209.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:29.520Z,1513278209.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:29.982Z,1513278209.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:30.353Z,1513278210.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:30.759Z,1513278210.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:31.150Z,1513278211.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:31.546Z,1513278211.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:31.923Z,1513278211.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:32.358Z,1513278212.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:32.726Z,1513278212.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:36.215Z,1513278216.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:36.370Z,1513278216.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:36.688Z,1513278216.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:37.101Z,1513278217.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:37.529Z,1513278217.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:37.975Z,1513278217.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:38.320Z,1513278218.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:38.688Z,1513278218.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:39.089Z,1513278219.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:39.497Z,1513278219.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:39.977Z,1513278219.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:40.325Z,1513278220.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:40.735Z,1513278220.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:41.088Z,1513278221.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:41.490Z,1513278221.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:41.000Z,1513278222.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:42.351Z,1513278222.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:42.720Z,1513278222.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:43.097Z,1513278223.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:43.498Z,1513278223.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:44.031Z,1513278224.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:44.250Z,1513278224.250 [NAL9602](INFO): Powering up NAL9602
2017-12-14T19:03:44.304Z,1513278224.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:44.715Z,1513278224.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:45.097Z,1513278225.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:45.499Z,1513278225.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:45.902Z,1513278225.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:46.312Z,1513278226.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:46.697Z,1513278226.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:47.112Z,1513278227.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:47.483Z,1513278227.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:47.879Z,1513278227.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:48.315Z,1513278228.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:48.684Z,1513278228.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:49.081Z,1513278229.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:49.485Z,1513278229.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:49.982Z,1513278229.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:50.328Z,1513278230.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:50.698Z,1513278230.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:51.097Z,1513278231.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:51.476Z,1513278231.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:51.974Z,1513278231.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:52.298Z,1513278232.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:52.684Z,1513278232.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:53.130Z,1513278233.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:53.539Z,1513278233.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:53.976Z,1513278233.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:54.292Z,1513278234.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:54.688Z,1513278234.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:55.097Z,1513278235.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:55.450Z,1513278235.450 [NAL9602](INFO): NAL9602 initialized
2017-12-14T19:03:55.499Z,1513278235.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:55.973Z,1513278235.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:56.300Z,1513278236.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:56.732Z,1513278236.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:57.098Z,1513278237.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:57.492Z,1513278237.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:57.956Z,1513278237.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:58.307Z,1513278238.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:58.709Z,1513278238.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:59.097Z,1513278239.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:59.505Z,1513278239.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:03:59.983Z,1513278239.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:00.321Z,1513278240.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:00.706Z,1513278240.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:01.083Z,1513278241.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:01.486Z,1513278241.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:01.912Z,1513278241.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:02.325Z,1513278242.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:02.699Z,1513278242.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:03.129Z,1513278243.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:03.500Z,1513278243.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:03.961Z,1513278243.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:04.302Z,1513278244.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:04.719Z,1513278244.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:05.182Z,1513278245.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:05.494Z,1513278245.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:05.986Z,1513278245.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:06.321Z,1513278246.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:06.719Z,1513278246.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:07.079Z,1513278247.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:07.475Z,1513278247.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:07.979Z,1513278247.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:08.303Z,1513278248.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:08.709Z,1513278248.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:09.103Z,1513278249.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:09.530Z,1513278249.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:09.980Z,1513278249.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:10.292Z,1513278250.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:10.703Z,1513278250.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:11.107Z,1513278251.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:11.507Z,1513278251.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:11.967Z,1513278251.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:12.293Z,1513278252.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:12.715Z,1513278252.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:13.106Z,1513278253.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:13.480Z,1513278253.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:13.908Z,1513278253.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:14.324Z,1513278254.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:14.706Z,1513278254.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:15.115Z,1513278255.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:15.484Z,1513278255.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:15.920Z,1513278255.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:16.304Z,1513278256.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:16.713Z,1513278256.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:17.107Z,1513278257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:17.498Z,1513278257.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:17.968Z,1513278257.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:18.302Z,1513278258.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:18.695Z,1513278258.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:19.123Z,1513278259.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:19.485Z,1513278259.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:19.995Z,1513278259.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:20.327Z,1513278260.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:20.696Z,1513278260.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:21.091Z,1513278261.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:21.495Z,1513278261.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:21.980Z,1513278261.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:22.343Z,1513278262.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:22.693Z,1513278262.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:23.108Z,1513278263.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:23.515Z,1513278263.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:23.975Z,1513278263.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:24.306Z,1513278264.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:24.689Z,1513278264.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:25.088Z,1513278265.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:25.491Z,1513278265.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:25.983Z,1513278265.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:26.334Z,1513278266.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:26.707Z,1513278266.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:27.116Z,1513278267.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:27.496Z,1513278267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:27.933Z,1513278267.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:28.308Z,1513278268.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:28.737Z,1513278268.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:29.103Z,1513278269.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:29.500Z,1513278269.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:29.879Z,1513278269.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:30.327Z,1513278270.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:30.685Z,1513278270.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:31.088Z,1513278271.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:31.480Z,1513278271.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:31.975Z,1513278271.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:32.387Z,1513278272.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:32.732Z,1513278272.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:33.095Z,1513278273.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:36.656Z,1513278276.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:36.833Z,1513278276.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:37.177Z,1513278277.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x52398 got:0x65309
2017-12-14T19:04:37.203Z,1513278277.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:37.590Z,1513278277.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:37.985Z,1513278277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:38.378Z,1513278278.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:38.803Z,1513278278.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:39.166Z,1513278279.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:39.580Z,1513278279.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:40.019Z,1513278280.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:40.385Z,1513278280.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:40.772Z,1513278280.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:41.176Z,1513278281.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:41.579Z,1513278281.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:42.014Z,1513278282.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:42.379Z,1513278282.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:42.777Z,1513278282.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:43.183Z,1513278283.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:43.609Z,1513278283.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:43.987Z,1513278283.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:44.365Z,1513278284.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:44.783Z,1513278284.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:45.187Z,1513278285.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:45.575Z,1513278285.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:45.983Z,1513278285.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:46.387Z,1513278286.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:46.779Z,1513278286.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:47.177Z,1513278287.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:47.629Z,1513278287.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:47.983Z,1513278287.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:48.395Z,1513278288.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:48.779Z,1513278288.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:49.156Z,1513278289.156 [PNI_TCM](ERROR): CRC does not match. Expected:0x63628 got:0x11116
2017-12-14T19:04:49.214Z,1513278289.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:49.584Z,1513278289.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:49.989Z,1513278289.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:50.400Z,1513278290.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:50.772Z,1513278290.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:51.219Z,1513278291.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:51.575Z,1513278291.575 [PNI_TCM](ERROR): CRC does not match. Expected:0x60255 got:0x26151
2017-12-14T19:04:51.611Z,1513278291.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:51.978Z,1513278291.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:52.369Z,1513278292.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:52.779Z,1513278292.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:53.166Z,1513278293.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:53.601Z,1513278293.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:54.023Z,1513278294.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:54.391Z,1513278294.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:54.783Z,1513278294.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:55.173Z,1513278295.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x55173 got:0x6977
2017-12-14T19:04:55.199Z,1513278295.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:55.561Z,1513278295.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:55.987Z,1513278295.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:56.383Z,1513278296.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:56.787Z,1513278296.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:57.184Z,1513278297.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:57.595Z,1513278297.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:57.958Z,1513278297.958 [PNI_TCM](ERROR): CRC does not match. Expected:0x58300 got:0x31347
2017-12-14T19:04:57.991Z,1513278297.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:58.388Z,1513278298.388 [PNI_TCM](ERROR): CRC does not match. Expected:0x45442 got:0x192
2017-12-14T19:04:58.415Z,1513278298.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:58.768Z,1513278298.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:59.186Z,1513278299.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:59.599Z,1513278299.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:04:59.991Z,1513278299.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:00.391Z,1513278300.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:00.791Z,1513278300.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:01.294Z,1513278301.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:01.592Z,1513278301.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:01.973Z,1513278301.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:02.374Z,1513278302.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:02.770Z,1513278302.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:03.190Z,1513278303.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:03.572Z,1513278303.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:03.988Z,1513278303.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:04.371Z,1513278304.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:04.804Z,1513278304.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:05.179Z,1513278305.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:05.582Z,1513278305.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:05.980Z,1513278305.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:06.395Z,1513278306.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:06.772Z,1513278306.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:07.183Z,1513278307.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:07.595Z,1513278307.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:08.051Z,1513278308.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:08.375Z,1513278308.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:08.790Z,1513278308.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:09.171Z,1513278309.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:09.571Z,1513278309.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:09.984Z,1513278309.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:10.415Z,1513278310.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:10.763Z,1513278310.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x8749 got:0x7490
2017-12-14T19:05:10.796Z,1513278310.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:11.190Z,1513278311.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:11.603Z,1513278311.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:11.990Z,1513278311.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:12.381Z,1513278312.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:12.828Z,1513278312.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:13.187Z,1513278313.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:13.622Z,1513278313.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:13.995Z,1513278313.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:14.395Z,1513278314.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x23043 got:0x57344
2017-12-14T19:05:14.435Z,1513278314.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:14.780Z,1513278314.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:15.200Z,1513278315.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:15.580Z,1513278315.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:15.982Z,1513278315.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:16.384Z,1513278316.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:16.794Z,1513278316.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:17.184Z,1513278317.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:17.599Z,1513278317.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:17.979Z,1513278317.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:18.399Z,1513278318.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:18.783Z,1513278318.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:19.183Z,1513278319.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:19.583Z,1513278319.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:19.988Z,1513278319.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:20.387Z,1513278320.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:20.810Z,1513278320.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:21.168Z,1513278321.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:21.585Z,1513278321.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:22.048Z,1513278322.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:22.387Z,1513278322.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:22.767Z,1513278322.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:23.185Z,1513278323.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:23.571Z,1513278323.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:23.992Z,1513278323.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:24.396Z,1513278324.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:24.783Z,1513278324.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:25.214Z,1513278325.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:25.566Z,1513278325.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:25.972Z,1513278325.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:26.386Z,1513278326.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:26.789Z,1513278326.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:27.208Z,1513278327.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:27.575Z,1513278327.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:27.998Z,1513278327.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:28.360Z,1513278328.360 [PNI_TCM](ERROR): CRC does not match. Expected:0x26844 got:0x7490
2017-12-14T19:05:28.395Z,1513278328.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:28.757Z,1513278328.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x1269 got:0x32768
2017-12-14T19:05:28.776Z,1513278328.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:29.175Z,1513278329.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:29.581Z,1513278329.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:29.983Z,1513278329.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:30.411Z,1513278330.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:30.771Z,1513278330.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:31.179Z,1513278331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:31.574Z,1513278331.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:32.004Z,1513278332.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:32.024Z,1513278332.024 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T19:00:31.7Z
2017-12-14T19:05:32.024Z,1513278332.024 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T19:05:32.024Z,1513278332.024 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T19:05:32.383Z,1513278332.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:33.202Z,1513278333.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:33.351Z,1513278333.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:36.828Z,1513278336.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:36.921Z,1513278336.921 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171214T002839/Courier0428.lzma
2017-12-14T19:05:37.025Z,1513278337.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:37.358Z,1513278337.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:37.704Z,1513278337.704 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0428.lzma.bak
2017-12-14T19:05:37.704Z,1513278337.704 [DataOverHttps](INFO): SBD MOMSN=5439414
2017-12-14T19:05:37.767Z,1513278337.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:39.024Z,1513278339.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:39.179Z,1513278339.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:42.655Z,1513278342.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:42.795Z,1513278342.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:43.180Z,1513278343.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:43.587Z,1513278343.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:43.980Z,1513278343.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:44.402Z,1513278344.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:47.810Z,1513278347.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x64971 got:0x116
2017-12-14T19:05:47.810Z,1513278347.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x9172 got:0x30
2017-12-14T19:05:47.810Z,1513278347.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x29783 got:0x41
2017-12-14T19:05:47.811Z,1513278347.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x34095 got:0x110
2017-12-14T19:05:47.811Z,1513278347.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x33050 got:0x157
2017-12-14T19:05:47.811Z,1513278347.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x7034 got:0x109
2017-12-14T19:05:47.812Z,1513278347.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x41963 got:0x100
2017-12-14T19:05:47.812Z,1513278347.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x38325 got:0x236
2017-12-14T19:05:47.833Z,1513278347.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:47.967Z,1513278347.967 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0429.lzma
2017-12-14T19:05:48.030Z,1513278348.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:48.405Z,1513278348.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:48.752Z,1513278348.752 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0429.lzma.bak
2017-12-14T19:05:48.752Z,1513278348.752 [DataOverHttps](INFO): SBD MOMSN=5439416
2017-12-14T19:05:48.823Z,1513278348.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:50.068Z,1513278350.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:50.076Z,1513278350.076 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T19:05:50.076Z,1513278350.076 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T19:05:50.076Z,1513278350.076 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T19:05:50.227Z,1513278350.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:53.709Z,1513278353.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:53.859Z,1513278353.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:54.271Z,1513278354.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:54.584Z,1513278354.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:54.983Z,1513278354.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:55.379Z,1513278355.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:55.799Z,1513278355.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:56.195Z,1513278356.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:56.615Z,1513278356.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:56.990Z,1513278356.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:57.388Z,1513278357.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:57.788Z,1513278357.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:58.187Z,1513278358.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:58.599Z,1513278358.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:58.993Z,1513278358.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:59.397Z,1513278359.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:05:59.798Z,1513278359.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:00.210Z,1513278360.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:00.581Z,1513278360.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:00.978Z,1513278360.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:01.388Z,1513278361.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:01.814Z,1513278361.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:02.204Z,1513278362.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:02.599Z,1513278362.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:03.038Z,1513278363.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:03.383Z,1513278363.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:03.780Z,1513278363.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:04.215Z,1513278364.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:04.599Z,1513278364.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:05.003Z,1513278365.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:05.400Z,1513278365.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:05.775Z,1513278365.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:06.331Z,1513278366.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:06.591Z,1513278366.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:07.015Z,1513278367.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:07.379Z,1513278367.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:07.827Z,1513278367.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:08.266Z,1513278368.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:08.590Z,1513278368.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:08.984Z,1513278368.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:09.382Z,1513278369.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:09.795Z,1513278369.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:10.208Z,1513278370.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:10.597Z,1513278370.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:10.597Z,1513278370.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 370
2017-12-14T19:06:10.597Z,1513278370.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:06:10.599Z,1513278370.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:10.599Z,1513278370.599 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 370
2017-12-14T19:06:10.599Z,1513278370.599 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:06:10.601Z,1513278370.601 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:10.601Z,1513278370.601 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 370
2017-12-14T19:06:10.601Z,1513278370.601 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:06:10.614Z,1513278370.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:06:10.614Z,1513278370.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:06:10.614Z,1513278370.614 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:06:11.009Z,1513278371.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:06:11.009Z,1513278371.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 370
2017-12-14T19:06:11.009Z,1513278371.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:06:11.009Z,1513278371.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 370
2017-12-14T19:06:11.010Z,1513278371.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:06:11.010Z,1513278371.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 370
2017-12-14T19:06:11.398Z,1513278371.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:06:11.399Z,1513278371.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:06:11.399Z,1513278371.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:06:11.399Z,1513278371.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:06:11.400Z,1513278371.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:06:11.400Z,1513278371.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:06:11.400Z,1513278371.400 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:06:11.401Z,1513278371.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:06:11.401Z,1513278371.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:06:11.772Z,1513278371.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:12.176Z,1513278372.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:12.608Z,1513278372.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:13.004Z,1513278373.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:13.375Z,1513278373.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:13.813Z,1513278373.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:14.196Z,1513278374.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:14.614Z,1513278374.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:14.991Z,1513278374.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:15.390Z,1513278375.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:15.808Z,1513278375.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:16.214Z,1513278376.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:16.593Z,1513278376.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:17.034Z,1513278377.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:17.444Z,1513278377.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:17.792Z,1513278377.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:18.256Z,1513278378.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:18.604Z,1513278378.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:18.991Z,1513278378.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:19.468Z,1513278379.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:19.828Z,1513278379.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:20.258Z,1513278380.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:20.588Z,1513278380.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:20.987Z,1513278380.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:21.382Z,1513278381.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:21.795Z,1513278381.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:22.246Z,1513278382.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:22.700Z,1513278382.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:23.001Z,1513278383.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:23.395Z,1513278383.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:23.780Z,1513278383.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:24.204Z,1513278384.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:24.608Z,1513278384.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:24.988Z,1513278384.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:25.501Z,1513278385.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:25.803Z,1513278385.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:26.186Z,1513278386.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:26.588Z,1513278386.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:27.019Z,1513278387.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:27.388Z,1513278387.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:27.779Z,1513278387.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:28.240Z,1513278388.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:28.622Z,1513278388.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:29.099Z,1513278389.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:29.406Z,1513278389.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:29.815Z,1513278389.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:30.187Z,1513278390.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:30.583Z,1513278390.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:31.023Z,1513278391.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:31.380Z,1513278391.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:31.836Z,1513278391.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:32.192Z,1513278392.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:32.595Z,1513278392.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:32.991Z,1513278392.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:33.390Z,1513278393.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:33.790Z,1513278393.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:34.248Z,1513278394.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:34.604Z,1513278394.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:34.984Z,1513278394.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:35.392Z,1513278395.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:35.783Z,1513278395.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:36.254Z,1513278396.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:36.582Z,1513278396.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:36.990Z,1513278396.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:37.439Z,1513278397.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:37.793Z,1513278397.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:38.303Z,1513278398.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:38.601Z,1513278398.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:38.979Z,1513278398.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:39.380Z,1513278399.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:39.814Z,1513278399.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:40.191Z,1513278400.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:40.593Z,1513278400.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:40.994Z,1513278400.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:41.399Z,1513278401.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:41.794Z,1513278401.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:42.205Z,1513278402.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:42.626Z,1513278402.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:43.014Z,1513278403.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:43.426Z,1513278403.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:43.795Z,1513278403.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:44.231Z,1513278404.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:44.636Z,1513278404.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:45.012Z,1513278405.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:45.410Z,1513278405.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:45.794Z,1513278405.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:46.216Z,1513278406.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:46.598Z,1513278406.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:47.022Z,1513278407.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:47.399Z,1513278407.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:47.856Z,1513278407.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:48.279Z,1513278408.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:48.607Z,1513278408.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:49.055Z,1513278409.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:49.391Z,1513278409.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:49.815Z,1513278409.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:50.295Z,1513278410.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:50.640Z,1513278410.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:58.547Z,1513278418.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:58.723Z,1513278418.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:59.114Z,1513278419.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:59.523Z,1513278419.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:06:59.962Z,1513278419.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:00.295Z,1513278420.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:00.699Z,1513278420.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:01.074Z,1513278421.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:01.508Z,1513278421.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:01.892Z,1513278421.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:02.334Z,1513278422.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:02.675Z,1513278422.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:03.095Z,1513278423.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:03.482Z,1513278423.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:03.879Z,1513278423.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:04.324Z,1513278424.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:04.699Z,1513278424.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:05.084Z,1513278425.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:05.488Z,1513278425.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:05.948Z,1513278425.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:06.283Z,1513278426.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:06.707Z,1513278426.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:07.075Z,1513278427.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:07.472Z,1513278427.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:07.955Z,1513278427.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:08.292Z,1513278428.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:08.711Z,1513278428.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:09.084Z,1513278429.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:09.498Z,1513278429.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:09.967Z,1513278429.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:10.284Z,1513278430.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:10.694Z,1513278430.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:11.095Z,1513278431.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:11.488Z,1513278431.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:11.969Z,1513278431.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:12.334Z,1513278432.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:12.702Z,1513278432.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:13.056Z,1513278433.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:13.463Z,1513278433.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:13.944Z,1513278433.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:14.356Z,1513278434.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:14.691Z,1513278434.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:15.062Z,1513278435.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:15.491Z,1513278435.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:15.864Z,1513278435.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:16.310Z,1513278436.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:16.665Z,1513278436.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:17.075Z,1513278437.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:17.475Z,1513278437.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:17.863Z,1513278437.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:18.302Z,1513278438.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:18.672Z,1513278438.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:19.067Z,1513278439.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:19.467Z,1513278439.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:19.942Z,1513278439.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:20.340Z,1513278440.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:20.699Z,1513278440.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:21.093Z,1513278441.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:21.491Z,1513278441.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:21.932Z,1513278441.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:22.287Z,1513278442.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:22.665Z,1513278442.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:23.103Z,1513278443.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:23.492Z,1513278443.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:23.977Z,1513278443.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:24.268Z,1513278444.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:24.662Z,1513278444.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:25.061Z,1513278445.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:25.462Z,1513278445.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:25.955Z,1513278445.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:26.292Z,1513278446.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:26.675Z,1513278446.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:27.066Z,1513278447.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:27.514Z,1513278447.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:27.867Z,1513278447.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:28.264Z,1513278448.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:28.683Z,1513278448.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:29.076Z,1513278449.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:29.475Z,1513278449.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:29.867Z,1513278449.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:30.395Z,1513278450.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:30.669Z,1513278450.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:30.757Z,1513278450.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:07:31.113Z,1513278451.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:31.476Z,1513278451.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:31.555Z,1513278451.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:07:31.882Z,1513278451.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:32.318Z,1513278452.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:32.684Z,1513278452.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:33.081Z,1513278453.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:33.478Z,1513278453.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:33.930Z,1513278453.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:34.260Z,1513278454.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:34.684Z,1513278454.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:35.088Z,1513278455.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:35.516Z,1513278455.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:35.926Z,1513278455.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:36.268Z,1513278456.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:36.695Z,1513278456.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:37.068Z,1513278457.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:37.460Z,1513278457.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:37.942Z,1513278457.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:38.290Z,1513278458.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:38.691Z,1513278458.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:39.067Z,1513278459.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:39.464Z,1513278459.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:40.010Z,1513278460.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:40.299Z,1513278460.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:40.678Z,1513278460.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:41.083Z,1513278461.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:41.496Z,1513278461.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:41.983Z,1513278461.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:42.303Z,1513278462.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:42.706Z,1513278462.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:43.074Z,1513278463.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:43.503Z,1513278463.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:43.883Z,1513278463.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:44.339Z,1513278464.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:44.675Z,1513278464.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:07:44.695Z,1513278464.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:45.063Z,1513278465.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:45.463Z,1513278465.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:45.470Z,1513278465.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:07:45.869Z,1513278465.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:46.344Z,1513278466.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:46.687Z,1513278466.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:47.083Z,1513278467.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:47.491Z,1513278467.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:47.948Z,1513278467.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:48.266Z,1513278468.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:48.675Z,1513278468.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:49.072Z,1513278469.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:49.464Z,1513278469.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:49.936Z,1513278469.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:50.273Z,1513278470.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:50.687Z,1513278470.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:54.366Z,1513278474.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:54.478Z,1513278474.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:54.845Z,1513278474.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:55.273Z,1513278475.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:55.651Z,1513278475.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:56.082Z,1513278476.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:56.441Z,1513278476.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:56.844Z,1513278476.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:57.243Z,1513278477.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:57.645Z,1513278477.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:58.046Z,1513278478.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:58.443Z,1513278478.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:58.843Z,1513278478.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:59.252Z,1513278479.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:07:59.641Z,1513278479.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:00.049Z,1513278480.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:00.438Z,1513278480.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:00.848Z,1513278480.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:01.244Z,1513278481.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:01.651Z,1513278481.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:02.039Z,1513278482.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:02.471Z,1513278482.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:02.840Z,1513278482.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:03.247Z,1513278483.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:03.750Z,1513278483.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:04.059Z,1513278484.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:04.459Z,1513278484.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:04.845Z,1513278484.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:05.240Z,1513278485.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:05.682Z,1513278485.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:06.095Z,1513278486.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:06.487Z,1513278486.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:06.859Z,1513278486.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:07.263Z,1513278487.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:07.687Z,1513278487.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:08.043Z,1513278488.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:08.471Z,1513278488.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:08.898Z,1513278488.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:09.247Z,1513278489.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:09.655Z,1513278489.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:10.052Z,1513278490.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:10.452Z,1513278490.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:10.849Z,1513278490.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:11.245Z,1513278491.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:11.647Z,1513278491.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:12.094Z,1513278492.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:12.450Z,1513278492.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:12.858Z,1513278492.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:13.254Z,1513278493.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:13.654Z,1513278493.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:14.049Z,1513278494.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:14.458Z,1513278494.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:14.861Z,1513278494.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:15.260Z,1513278495.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:15.669Z,1513278495.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:16.066Z,1513278496.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:16.469Z,1513278496.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:16.865Z,1513278496.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:17.240Z,1513278497.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:17.640Z,1513278497.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:18.041Z,1513278498.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:18.474Z,1513278498.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:18.847Z,1513278498.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:19.248Z,1513278499.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:19.644Z,1513278499.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:20.086Z,1513278500.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:20.443Z,1513278500.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:20.843Z,1513278500.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:21.240Z,1513278501.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:21.723Z,1513278501.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:22.044Z,1513278502.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:22.444Z,1513278502.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:22.843Z,1513278502.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:23.239Z,1513278503.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:23.642Z,1513278503.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:24.047Z,1513278504.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:24.441Z,1513278504.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:24.926Z,1513278504.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:25.259Z,1513278505.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:25.659Z,1513278505.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:26.043Z,1513278506.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:26.452Z,1513278506.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:26.646Z,1513278506.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:08:26.844Z,1513278506.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:27.245Z,1513278507.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:27.442Z,1513278507.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:08:27.656Z,1513278507.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:28.053Z,1513278508.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:28.452Z,1513278508.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:28.982Z,1513278508.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:29.248Z,1513278509.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:29.702Z,1513278509.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:30.051Z,1513278510.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:30.512Z,1513278510.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:30.858Z,1513278510.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:31.255Z,1513278511.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:31.659Z,1513278511.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:32.102Z,1513278512.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:32.458Z,1513278512.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:32.851Z,1513278512.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:33.248Z,1513278513.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:33.667Z,1513278513.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:34.064Z,1513278514.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:34.468Z,1513278514.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:34.839Z,1513278514.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:35.268Z,1513278515.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:35.636Z,1513278515.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:36.062Z,1513278516.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:36.443Z,1513278516.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:36.852Z,1513278516.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:37.252Z,1513278517.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:37.659Z,1513278517.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:38.050Z,1513278518.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:38.547Z,1513278518.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:38.837Z,1513278518.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:39.243Z,1513278519.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:39.654Z,1513278519.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:40.060Z,1513278520.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:40.449Z,1513278520.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:40.843Z,1513278520.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:41.247Z,1513278521.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:41.714Z,1513278521.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:42.053Z,1513278522.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:42.450Z,1513278522.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:42.858Z,1513278522.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:43.258Z,1513278523.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:43.654Z,1513278523.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:44.049Z,1513278524.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:44.446Z,1513278524.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:44.863Z,1513278524.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:45.245Z,1513278525.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:45.667Z,1513278525.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:46.056Z,1513278526.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:46.456Z,1513278526.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:46.840Z,1513278526.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:47.239Z,1513278527.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:47.663Z,1513278527.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:48.103Z,1513278528.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:48.433Z,1513278528.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:48.859Z,1513278528.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:49.266Z,1513278529.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:49.658Z,1513278529.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:50.058Z,1513278530.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:50.437Z,1513278530.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:50.882Z,1513278530.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:54.403Z,1513278534.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:54.591Z,1513278534.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:54.916Z,1513278534.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:55.323Z,1513278535.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:55.744Z,1513278535.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:56.111Z,1513278536.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:56.554Z,1513278536.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:56.916Z,1513278536.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:57.315Z,1513278537.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:57.760Z,1513278537.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:58.110Z,1513278538.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:58.524Z,1513278538.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:58.923Z,1513278538.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:59.325Z,1513278539.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:08:59.713Z,1513278539.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:00.116Z,1513278540.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:00.520Z,1513278540.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:00.923Z,1513278540.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:01.319Z,1513278541.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:01.701Z,1513278541.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:02.111Z,1513278542.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:02.515Z,1513278542.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:02.912Z,1513278542.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:03.315Z,1513278543.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:03.719Z,1513278543.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:04.135Z,1513278544.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:04.515Z,1513278544.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:04.948Z,1513278544.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:05.360Z,1513278545.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:05.719Z,1513278545.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:06.123Z,1513278546.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:06.516Z,1513278546.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:06.908Z,1513278546.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:07.309Z,1513278547.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:07.705Z,1513278547.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:08.107Z,1513278548.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:08.519Z,1513278548.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:08.920Z,1513278548.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:09.314Z,1513278549.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:09.723Z,1513278549.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:10.103Z,1513278550.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:10.508Z,1513278550.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:10.912Z,1513278550.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:11.311Z,1513278551.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:11.712Z,1513278551.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:11.712Z,1513278551.712 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 371
2017-12-14T19:09:11.712Z,1513278551.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:09:11.715Z,1513278551.715 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:11.715Z,1513278551.715 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 371
2017-12-14T19:09:11.715Z,1513278551.715 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:09:11.717Z,1513278551.717 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:11.717Z,1513278551.717 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 371
2017-12-14T19:09:11.717Z,1513278551.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:09:11.729Z,1513278551.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:09:11.729Z,1513278551.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:09:11.729Z,1513278551.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:09:12.156Z,1513278552.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:09:12.156Z,1513278552.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 371
2017-12-14T19:09:12.156Z,1513278552.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:09:12.157Z,1513278552.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 371
2017-12-14T19:09:12.157Z,1513278552.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:09:12.157Z,1513278552.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 371
2017-12-14T19:09:12.525Z,1513278552.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:09:12.525Z,1513278552.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:09:12.526Z,1513278552.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:09:12.526Z,1513278552.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:09:12.527Z,1513278552.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:09:12.527Z,1513278552.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:09:12.527Z,1513278552.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:09:12.528Z,1513278552.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:09:12.528Z,1513278552.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:09:12.917Z,1513278552.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:13.300Z,1513278553.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:13.703Z,1513278553.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:14.129Z,1513278554.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:14.527Z,1513278554.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:14.919Z,1513278554.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:15.319Z,1513278555.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:15.705Z,1513278555.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:16.104Z,1513278556.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:16.512Z,1513278556.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:16.975Z,1513278556.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:17.319Z,1513278557.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:17.763Z,1513278557.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:18.108Z,1513278558.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:18.530Z,1513278558.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:18.914Z,1513278558.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:19.316Z,1513278559.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:19.717Z,1513278559.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:20.135Z,1513278560.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:20.516Z,1513278560.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:20.911Z,1513278560.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:21.318Z,1513278561.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:21.698Z,1513278561.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:22.095Z,1513278562.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:22.531Z,1513278562.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:22.929Z,1513278562.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:23.322Z,1513278563.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:23.446Z,1513278563.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:09:23.699Z,1513278563.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:24.236Z,1513278564.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:24.242Z,1513278564.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:09:24.504Z,1513278564.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:24.709Z,1513278564.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:09:24.916Z,1513278564.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:25.308Z,1513278565.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:25.711Z,1513278565.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:26.106Z,1513278566.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:26.516Z,1513278566.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:26.951Z,1513278566.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:27.319Z,1513278567.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:27.715Z,1513278567.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:28.107Z,1513278568.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:28.513Z,1513278568.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:28.916Z,1513278568.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:29.323Z,1513278569.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:29.707Z,1513278569.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:30.107Z,1513278570.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:30.563Z,1513278570.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:30.961Z,1513278570.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:31.022Z,1513278571.022 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T19:09:31.318Z,1513278571.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:31.712Z,1513278571.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:32.102Z,1513278572.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:32.516Z,1513278572.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:32.916Z,1513278572.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:33.318Z,1513278573.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:33.766Z,1513278573.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:34.103Z,1513278574.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:34.523Z,1513278574.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:34.918Z,1513278574.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:35.323Z,1513278575.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:35.708Z,1513278575.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:36.108Z,1513278576.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:36.523Z,1513278576.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:36.979Z,1513278576.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:37.320Z,1513278577.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:37.696Z,1513278577.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:38.104Z,1513278578.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:38.525Z,1513278578.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:38.994Z,1513278578.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:39.308Z,1513278579.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:39.734Z,1513278579.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:40.104Z,1513278580.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:40.544Z,1513278580.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:40.990Z,1513278580.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:41.308Z,1513278581.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:41.707Z,1513278581.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:42.111Z,1513278582.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:42.511Z,1513278582.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:42.911Z,1513278582.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:43.311Z,1513278583.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:43.707Z,1513278583.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:44.163Z,1513278584.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:44.516Z,1513278584.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:44.916Z,1513278584.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:45.312Z,1513278585.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:45.715Z,1513278585.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:46.110Z,1513278586.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:46.509Z,1513278586.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:46.917Z,1513278586.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:47.355Z,1513278587.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:47.716Z,1513278587.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:48.105Z,1513278588.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:48.506Z,1513278588.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:48.943Z,1513278588.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:49.311Z,1513278589.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:49.717Z,1513278589.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:50.116Z,1513278590.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:50.571Z,1513278590.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:50.916Z,1513278590.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:54.412Z,1513278594.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:54.547Z,1513278594.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:54.903Z,1513278594.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:55.311Z,1513278595.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:55.707Z,1513278595.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:56.102Z,1513278596.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:56.500Z,1513278596.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:56.880Z,1513278596.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:57.288Z,1513278597.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:57.694Z,1513278597.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:58.090Z,1513278598.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:58.487Z,1513278598.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:58.886Z,1513278598.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:59.286Z,1513278599.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:09:59.690Z,1513278599.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:00.144Z,1513278600.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:00.486Z,1513278600.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:00.955Z,1513278600.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:01.301Z,1513278601.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:01.736Z,1513278601.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:02.090Z,1513278602.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:02.533Z,1513278602.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:02.887Z,1513278602.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:03.331Z,1513278603.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:03.697Z,1513278603.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:04.107Z,1513278604.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:04.496Z,1513278604.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:04.894Z,1513278604.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:05.296Z,1513278605.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:05.675Z,1513278605.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:06.078Z,1513278606.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:06.551Z,1513278606.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:06.915Z,1513278606.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:07.303Z,1513278607.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:07.700Z,1513278607.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:08.103Z,1513278608.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:08.493Z,1513278608.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:08.891Z,1513278608.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:09.291Z,1513278609.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:09.742Z,1513278609.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:10.088Z,1513278610.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:10.493Z,1513278610.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:10.915Z,1513278610.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:11.287Z,1513278611.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:11.691Z,1513278611.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:12.083Z,1513278612.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:12.483Z,1513278612.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:12.895Z,1513278612.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:13.299Z,1513278613.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:13.703Z,1513278613.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:14.094Z,1513278614.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:14.490Z,1513278614.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:14.887Z,1513278614.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:15.283Z,1513278615.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:15.696Z,1513278615.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:16.111Z,1513278616.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:16.511Z,1513278616.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:16.895Z,1513278616.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:17.293Z,1513278617.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:17.693Z,1513278617.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:18.094Z,1513278618.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:18.494Z,1513278618.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:18.904Z,1513278618.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:19.402Z,1513278619.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:19.446Z,1513278619.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:19.697Z,1513278619.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:20.094Z,1513278620.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:20.242Z,1513278620.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:20.495Z,1513278620.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:20.649Z,1513278620.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:20.895Z,1513278620.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:21.304Z,1513278621.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:21.446Z,1513278621.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:21.710Z,1513278621.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:22.095Z,1513278622.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:22.241Z,1513278622.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:22.520Z,1513278622.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:22.646Z,1513278622.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:10:22.937Z,1513278622.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:23.315Z,1513278623.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:23.688Z,1513278623.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:24.091Z,1513278624.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:24.511Z,1513278624.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:24.885Z,1513278624.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:25.327Z,1513278625.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:25.722Z,1513278625.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:26.083Z,1513278626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:26.482Z,1513278626.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:26.886Z,1513278626.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:27.291Z,1513278627.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:27.693Z,1513278627.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:28.099Z,1513278628.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:28.500Z,1513278628.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:28.882Z,1513278628.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:29.294Z,1513278629.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:29.693Z,1513278629.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:30.092Z,1513278630.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:30.492Z,1513278630.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:30.907Z,1513278630.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:31.301Z,1513278631.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:31.698Z,1513278631.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:32.121Z,1513278632.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:32.486Z,1513278632.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:32.888Z,1513278632.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:33.282Z,1513278633.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:33.728Z,1513278633.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:34.107Z,1513278634.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:34.505Z,1513278634.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:34.891Z,1513278634.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:35.287Z,1513278635.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:35.687Z,1513278635.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:36.086Z,1513278636.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:36.495Z,1513278636.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:36.894Z,1513278636.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:37.311Z,1513278637.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:37.697Z,1513278637.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:38.091Z,1513278638.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:38.511Z,1513278638.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:38.944Z,1513278638.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:39.289Z,1513278639.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:39.701Z,1513278639.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:40.097Z,1513278640.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:40.492Z,1513278640.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:40.886Z,1513278640.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:41.288Z,1513278641.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:41.747Z,1513278641.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:42.092Z,1513278642.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:42.505Z,1513278642.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:42.895Z,1513278642.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:43.298Z,1513278643.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:43.689Z,1513278643.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:44.094Z,1513278644.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:44.494Z,1513278644.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:44.937Z,1513278644.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:45.307Z,1513278645.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:45.728Z,1513278645.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:46.103Z,1513278646.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:46.515Z,1513278646.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:46.913Z,1513278646.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:47.308Z,1513278647.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:47.708Z,1513278647.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:48.154Z,1513278648.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:48.499Z,1513278648.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:48.886Z,1513278648.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:49.285Z,1513278649.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:49.691Z,1513278649.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:50.087Z,1513278650.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:50.490Z,1513278650.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:50.494Z,1513278650.494 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T19:10:50.494Z,1513278650.494 [Default:CheckIn:C.Wait] Stopped
2017-12-14T19:10:50.494Z,1513278650.494 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T19:10:50.494Z,1513278650.494 [Default:CheckIn:D] Running Loop=1
2017-12-14T19:10:50.897Z,1513278650.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:50.901Z,1513278650.901 [Default:CheckIn:D] Stopped
2017-12-14T19:10:50.901Z,1513278650.901 [Default:CheckIn:E] Running Loop=1
2017-12-14T19:10:51.307Z,1513278651.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:51.310Z,1513278651.310 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1117.591797 min 
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn:E] Stopped
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn] Stopped
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn](INFO): Running loop #108
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn] Running Loop=108
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T19:10:51.311Z,1513278651.311 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T19:10:54.796Z,1513278654.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:54.927Z,1513278654.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:55.271Z,1513278655.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:55.696Z,1513278655.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:56.066Z,1513278656.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:56.472Z,1513278656.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:56.880Z,1513278656.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:57.269Z,1513278657.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:57.717Z,1513278657.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:58.068Z,1513278658.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:58.469Z,1513278658.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:58.871Z,1513278658.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:59.272Z,1513278659.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:10:59.681Z,1513278659.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:00.091Z,1513278660.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:00.487Z,1513278660.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:00.891Z,1513278660.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:01.279Z,1513278661.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:01.671Z,1513278661.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:02.079Z,1513278662.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:02.468Z,1513278662.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:02.891Z,1513278662.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:03.291Z,1513278663.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:03.686Z,1513278663.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:04.138Z,1513278664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:04.474Z,1513278664.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:04.882Z,1513278664.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:05.295Z,1513278665.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:05.695Z,1513278665.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:06.097Z,1513278666.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:06.499Z,1513278666.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:06.902Z,1513278666.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:07.302Z,1513278667.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:07.708Z,1513278667.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:08.079Z,1513278668.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:08.508Z,1513278668.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:08.883Z,1513278668.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:09.312Z,1513278669.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:09.675Z,1513278669.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:10.075Z,1513278670.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:10.504Z,1513278670.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:10.887Z,1513278670.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:11.275Z,1513278671.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:11.681Z,1513278671.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:12.087Z,1513278672.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:12.481Z,1513278672.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:12.874Z,1513278672.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:13.275Z,1513278673.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:13.739Z,1513278673.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:14.071Z,1513278674.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:14.480Z,1513278674.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:14.881Z,1513278674.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:15.281Z,1513278675.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:15.680Z,1513278675.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:16.073Z,1513278676.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:16.479Z,1513278676.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:16.992Z,1513278676.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:17.310Z,1513278677.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:17.719Z,1513278677.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:18.091Z,1513278678.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:18.489Z,1513278678.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:18.893Z,1513278678.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:19.306Z,1513278679.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:19.696Z,1513278679.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:20.080Z,1513278680.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:20.524Z,1513278680.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:20.872Z,1513278680.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:21.277Z,1513278681.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:21.689Z,1513278681.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:22.120Z,1513278682.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:22.519Z,1513278682.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:22.879Z,1513278682.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:23.287Z,1513278683.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:23.687Z,1513278683.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:24.068Z,1513278684.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:24.499Z,1513278684.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:24.890Z,1513278684.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:25.296Z,1513278685.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:25.703Z,1513278685.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:26.081Z,1513278686.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:26.483Z,1513278686.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:26.879Z,1513278686.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:27.158Z,1513278687.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:11:27.274Z,1513278687.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:27.663Z,1513278687.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:27.953Z,1513278687.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:11:28.158Z,1513278688.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:28.519Z,1513278688.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:28.906Z,1513278688.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:29.360Z,1513278689.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:29.712Z,1513278689.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:30.149Z,1513278690.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:30.515Z,1513278690.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:30.875Z,1513278690.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:31.324Z,1513278691.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:31.699Z,1513278691.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:32.099Z,1513278692.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:32.558Z,1513278692.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:32.879Z,1513278692.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:33.298Z,1513278693.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:33.760Z,1513278693.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:34.079Z,1513278694.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:34.526Z,1513278694.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:34.895Z,1513278694.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:35.290Z,1513278695.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:35.695Z,1513278695.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:36.089Z,1513278696.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:36.493Z,1513278696.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:36.875Z,1513278696.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:37.323Z,1513278697.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:37.700Z,1513278697.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:38.158Z,1513278698.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:38.514Z,1513278698.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:38.883Z,1513278698.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:39.321Z,1513278699.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:39.723Z,1513278699.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:40.089Z,1513278700.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:40.529Z,1513278700.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:40.896Z,1513278700.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:41.310Z,1513278701.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:41.688Z,1513278701.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:42.091Z,1513278702.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:42.463Z,1513278702.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:42.901Z,1513278702.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:43.296Z,1513278703.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:43.696Z,1513278703.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:44.115Z,1513278704.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:44.487Z,1513278704.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:44.872Z,1513278704.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:45.277Z,1513278705.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:45.670Z,1513278705.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:46.076Z,1513278706.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:46.483Z,1513278706.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:46.906Z,1513278706.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:47.294Z,1513278707.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:47.679Z,1513278707.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:48.080Z,1513278708.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:48.510Z,1513278708.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:48.884Z,1513278708.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:49.280Z,1513278709.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:49.723Z,1513278709.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:50.088Z,1513278710.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:50.539Z,1513278710.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:50.869Z,1513278710.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:51.276Z,1513278711.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:51.668Z,1513278711.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:55.182Z,1513278715.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:55.288Z,1513278715.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:55.681Z,1513278715.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:56.091Z,1513278716.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:56.555Z,1513278716.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:56.876Z,1513278716.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:57.318Z,1513278717.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:57.768Z,1513278717.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:58.095Z,1513278718.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:58.535Z,1513278718.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:58.891Z,1513278718.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:59.291Z,1513278719.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:11:59.668Z,1513278719.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:00.072Z,1513278720.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:00.503Z,1513278720.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:00.900Z,1513278720.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:01.293Z,1513278721.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:01.703Z,1513278721.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:02.073Z,1513278722.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:02.483Z,1513278722.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:02.951Z,1513278722.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:03.275Z,1513278723.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:03.680Z,1513278723.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:04.076Z,1513278724.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:04.476Z,1513278724.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:04.874Z,1513278724.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:05.279Z,1513278725.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:05.702Z,1513278725.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:06.163Z,1513278726.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:06.475Z,1513278726.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:06.880Z,1513278726.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:07.280Z,1513278727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:07.679Z,1513278727.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:08.071Z,1513278728.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:08.478Z,1513278728.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:08.874Z,1513278728.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:09.138Z,1513278729.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:12:09.312Z,1513278729.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:09.682Z,1513278729.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:09.933Z,1513278729.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:12:10.085Z,1513278730.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:10.486Z,1513278730.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:10.873Z,1513278730.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:11.272Z,1513278731.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:11.675Z,1513278731.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:12.079Z,1513278732.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:12.538Z,1513278732.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:12.538Z,1513278732.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 372
2017-12-14T19:12:12.538Z,1513278732.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:12:12.540Z,1513278732.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:12.540Z,1513278732.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 372
2017-12-14T19:12:12.540Z,1513278732.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:12:12.542Z,1513278732.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:12.542Z,1513278732.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 372
2017-12-14T19:12:12.542Z,1513278732.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:12:12.588Z,1513278732.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:12:12.588Z,1513278732.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:12:12.588Z,1513278732.588 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:12:12.907Z,1513278732.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:12:12.907Z,1513278732.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 372
2017-12-14T19:12:12.907Z,1513278732.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:12:12.907Z,1513278732.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 372
2017-12-14T19:12:12.908Z,1513278732.908 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:12:12.908Z,1513278732.908 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 372
2017-12-14T19:12:13.287Z,1513278733.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:12:13.287Z,1513278733.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:12:13.287Z,1513278733.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:12:13.288Z,1513278733.288 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:12:13.288Z,1513278733.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:12:13.288Z,1513278733.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:12:13.289Z,1513278733.289 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:12:13.289Z,1513278733.289 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:12:13.290Z,1513278733.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:12:13.694Z,1513278733.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:14.087Z,1513278734.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:14.472Z,1513278734.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:14.872Z,1513278734.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:15.279Z,1513278735.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:15.727Z,1513278735.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:16.135Z,1513278736.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:16.483Z,1513278736.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:16.876Z,1513278736.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:17.275Z,1513278737.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:17.676Z,1513278737.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:18.126Z,1513278738.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:18.475Z,1513278738.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:18.961Z,1513278738.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:19.284Z,1513278739.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:19.711Z,1513278739.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:20.072Z,1513278740.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:20.477Z,1513278740.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:20.877Z,1513278740.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:21.271Z,1513278741.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:21.695Z,1513278741.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:22.133Z,1513278742.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:22.490Z,1513278742.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:22.879Z,1513278742.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:23.279Z,1513278743.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:23.675Z,1513278743.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:24.080Z,1513278744.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:24.481Z,1513278744.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:24.890Z,1513278744.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:25.306Z,1513278745.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:25.687Z,1513278745.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:26.069Z,1513278746.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:26.471Z,1513278746.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:26.868Z,1513278746.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:27.285Z,1513278747.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:27.692Z,1513278747.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:28.116Z,1513278748.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:28.523Z,1513278748.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:28.875Z,1513278748.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:29.273Z,1513278749.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:29.671Z,1513278749.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:30.075Z,1513278750.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:30.475Z,1513278750.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:30.903Z,1513278750.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:31.280Z,1513278751.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:31.735Z,1513278751.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:32.079Z,1513278752.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:32.477Z,1513278752.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:32.874Z,1513278752.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:33.275Z,1513278753.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:33.685Z,1513278753.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:34.084Z,1513278754.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:34.491Z,1513278754.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:34.884Z,1513278754.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:35.283Z,1513278755.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:35.677Z,1513278755.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:36.087Z,1513278756.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:36.487Z,1513278756.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:36.894Z,1513278756.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:37.300Z,1513278757.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:37.699Z,1513278757.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:38.117Z,1513278758.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:38.479Z,1513278758.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:38.899Z,1513278758.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:39.282Z,1513278759.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:39.686Z,1513278759.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:40.128Z,1513278760.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:40.491Z,1513278760.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:40.868Z,1513278760.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:41.303Z,1513278761.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:41.672Z,1513278761.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:42.103Z,1513278762.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:42.473Z,1513278762.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:42.877Z,1513278762.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:43.283Z,1513278763.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:43.683Z,1513278763.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:44.070Z,1513278764.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:44.517Z,1513278764.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:44.875Z,1513278764.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:45.271Z,1513278765.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:45.732Z,1513278765.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:46.091Z,1513278766.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:46.484Z,1513278766.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:46.871Z,1513278766.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:47.275Z,1513278767.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:47.711Z,1513278767.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:48.076Z,1513278768.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:48.483Z,1513278768.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:48.886Z,1513278768.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:49.299Z,1513278769.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:49.699Z,1513278769.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:50.080Z,1513278770.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:50.523Z,1513278770.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:50.927Z,1513278770.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:51.283Z,1513278771.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:51.690Z,1513278771.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:52.092Z,1513278772.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:55.547Z,1513278775.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:55.677Z,1513278775.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:56.059Z,1513278776.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:56.448Z,1513278776.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:56.844Z,1513278776.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:57.243Z,1513278777.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:57.649Z,1513278777.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:58.052Z,1513278778.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:58.459Z,1513278778.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:58.845Z,1513278778.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:59.269Z,1513278779.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:12:59.639Z,1513278779.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:00.040Z,1513278780.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:00.446Z,1513278780.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:00.860Z,1513278780.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:01.267Z,1513278781.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:01.653Z,1513278781.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:02.046Z,1513278782.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:02.467Z,1513278782.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:02.844Z,1513278782.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:03.267Z,1513278783.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:03.707Z,1513278783.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:04.090Z,1513278784.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:04.451Z,1513278784.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:04.850Z,1513278784.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:05.259Z,1513278785.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:05.659Z,1513278785.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:06.032Z,1513278786.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:06.440Z,1513278786.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:06.927Z,1513278786.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:07.264Z,1513278787.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:07.663Z,1513278787.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:08.036Z,1513278788.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:08.438Z,1513278788.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:08.863Z,1513278788.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:09.240Z,1513278789.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:09.656Z,1513278789.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:10.095Z,1513278790.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:10.467Z,1513278790.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:10.835Z,1513278790.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:11.239Z,1513278791.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:11.635Z,1513278791.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:12.039Z,1513278792.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:12.471Z,1513278792.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:12.868Z,1513278792.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:13.295Z,1513278793.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:13.667Z,1513278793.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:14.039Z,1513278794.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:14.443Z,1513278794.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:14.839Z,1513278794.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:15.238Z,1513278795.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:15.670Z,1513278795.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:16.044Z,1513278796.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:16.491Z,1513278796.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:16.836Z,1513278796.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:17.247Z,1513278797.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:17.642Z,1513278797.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:18.040Z,1513278798.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:18.446Z,1513278798.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:18.848Z,1513278798.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:19.253Z,1513278799.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:19.699Z,1513278799.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:20.043Z,1513278800.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:20.451Z,1513278800.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:20.851Z,1513278800.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:21.255Z,1513278801.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:21.660Z,1513278801.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:22.063Z,1513278802.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:22.456Z,1513278802.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:22.830Z,1513278802.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:23.238Z,1513278803.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:23.644Z,1513278803.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:24.072Z,1513278804.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:24.447Z,1513278804.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:24.892Z,1513278804.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:25.261Z,1513278805.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:25.663Z,1513278805.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:26.068Z,1513278806.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:26.492Z,1513278806.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:26.890Z,1513278806.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:27.252Z,1513278807.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:27.661Z,1513278807.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:28.055Z,1513278808.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:28.450Z,1513278808.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:28.846Z,1513278808.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:29.246Z,1513278809.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:29.711Z,1513278809.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:30.051Z,1513278810.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:30.450Z,1513278810.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:30.854Z,1513278810.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:31.258Z,1513278811.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:31.662Z,1513278811.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:32.049Z,1513278812.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:32.446Z,1513278812.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:32.898Z,1513278812.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:33.259Z,1513278813.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:33.660Z,1513278813.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:34.062Z,1513278814.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:34.463Z,1513278814.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:34.838Z,1513278814.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:35.279Z,1513278815.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:35.635Z,1513278815.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:36.094Z,1513278816.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:36.452Z,1513278816.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:36.848Z,1513278816.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:37.257Z,1513278817.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:37.653Z,1513278817.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:38.051Z,1513278818.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:38.446Z,1513278818.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:38.840Z,1513278818.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:39.238Z,1513278819.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:39.663Z,1513278819.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:40.059Z,1513278820.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:40.459Z,1513278820.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:40.830Z,1513278820.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:41.258Z,1513278821.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:41.636Z,1513278821.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:42.050Z,1513278822.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:42.496Z,1513278822.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:42.856Z,1513278822.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:43.253Z,1513278823.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:43.659Z,1513278823.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:44.053Z,1513278824.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:44.455Z,1513278824.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:44.847Z,1513278824.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:45.250Z,1513278825.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:45.671Z,1513278825.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:46.064Z,1513278826.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:46.463Z,1513278826.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:46.843Z,1513278826.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:47.267Z,1513278827.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:47.660Z,1513278827.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:48.032Z,1513278828.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:48.436Z,1513278828.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:48.927Z,1513278828.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:49.261Z,1513278829.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:49.658Z,1513278829.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:50.031Z,1513278830.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:50.433Z,1513278830.433 [BPC1](ERROR): Failed to receive battery data
2017-12-14T19:13:50.433Z,1513278830.433 [BPC1] Communications Fault, FailCount= 1
2017-12-14T19:13:50.433Z,1513278830.433 [BPC1](ERROR): Communications Fault
2017-12-14T19:13:50.466Z,1513278830.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:50.492Z,1513278830.492 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-14T19:13:50.879Z,1513278830.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:51.267Z,1513278831.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:51.661Z,1513278831.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:51.687Z,1513278831.687 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T19:13:51.687Z,1513278831.687 [BPC1] No Fault, FailCount= 1
2017-12-14T19:13:52.163Z,1513278832.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:52.448Z,1513278832.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:55.973Z,1513278835.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:56.078Z,1513278836.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:56.407Z,1513278836.407 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T19:13:56.407Z,1513278836.407 [NAL9602] Data Fault, FailCount= 2
2017-12-14T19:13:56.407Z,1513278836.407 [NAL9602](ERROR): Data Fault
2017-12-14T19:13:56.439Z,1513278836.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:56.465Z,1513278836.465 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T19:13:56.802Z,1513278836.802 [NAL9602](INFO): Powering down
2017-12-14T19:13:56.850Z,1513278836.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:57.242Z,1513278837.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:57.647Z,1513278837.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:57.673Z,1513278837.673 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T19:13:57.673Z,1513278837.673 [NAL9602] No Fault, FailCount= 2
2017-12-14T19:13:58.047Z,1513278838.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:58.472Z,1513278838.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:58.845Z,1513278838.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:59.246Z,1513278839.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:13:59.646Z,1513278839.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:00.042Z,1513278840.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:00.484Z,1513278840.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:00.847Z,1513278840.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:01.244Z,1513278841.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:01.695Z,1513278841.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:02.047Z,1513278842.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:02.460Z,1513278842.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:02.854Z,1513278842.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:03.249Z,1513278843.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:03.655Z,1513278843.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:04.048Z,1513278844.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:04.444Z,1513278844.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:04.915Z,1513278844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:05.245Z,1513278845.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:05.649Z,1513278845.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:06.057Z,1513278846.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:06.447Z,1513278846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:06.848Z,1513278846.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:07.251Z,1513278847.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:07.648Z,1513278847.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:08.094Z,1513278848.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:08.450Z,1513278848.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:08.851Z,1513278848.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:09.250Z,1513278849.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:09.654Z,1513278849.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:10.050Z,1513278850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:10.458Z,1513278850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:10.876Z,1513278850.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:11.331Z,1513278851.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:11.657Z,1513278851.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:12.063Z,1513278852.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:12.467Z,1513278852.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:12.857Z,1513278852.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:13.278Z,1513278853.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:13.645Z,1513278853.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:14.085Z,1513278854.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:14.494Z,1513278854.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:14.844Z,1513278854.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:15.245Z,1513278855.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:15.647Z,1513278855.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:16.046Z,1513278856.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:16.449Z,1513278856.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:16.852Z,1513278856.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:17.245Z,1513278857.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:17.687Z,1513278857.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:18.057Z,1513278858.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:18.458Z,1513278858.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:18.847Z,1513278858.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:19.243Z,1513278859.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:19.643Z,1513278859.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:20.069Z,1513278860.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:20.438Z,1513278860.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:20.917Z,1513278860.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:21.233Z,1513278861.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:21.672Z,1513278861.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:22.042Z,1513278862.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:22.447Z,1513278862.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:22.839Z,1513278862.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:23.242Z,1513278863.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:23.643Z,1513278863.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:24.088Z,1513278864.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:24.447Z,1513278864.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:24.839Z,1513278864.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:25.251Z,1513278865.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:25.641Z,1513278865.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:26.048Z,1513278866.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:26.440Z,1513278866.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:26.812Z,1513278866.812 [NAL9602](INFO): Powering up NAL9602
2017-12-14T19:14:26.844Z,1513278866.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:27.291Z,1513278867.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:27.641Z,1513278867.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:28.047Z,1513278868.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:28.450Z,1513278868.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:28.844Z,1513278868.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:29.247Z,1513278869.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:29.646Z,1513278869.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:30.048Z,1513278870.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:30.487Z,1513278870.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:30.851Z,1513278870.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:31.248Z,1513278871.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:31.655Z,1513278871.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:32.048Z,1513278872.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:32.476Z,1513278872.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:32.843Z,1513278872.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:33.249Z,1513278873.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:33.675Z,1513278873.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:34.080Z,1513278874.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:34.441Z,1513278874.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:34.864Z,1513278874.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:35.236Z,1513278875.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:35.663Z,1513278875.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:36.055Z,1513278876.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:36.453Z,1513278876.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:36.938Z,1513278876.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:37.268Z,1513278877.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:37.607Z,1513278877.607 [NAL9602](INFO): NAL9602 initialized
2017-12-14T19:14:37.639Z,1513278877.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:38.066Z,1513278878.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:38.469Z,1513278878.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:38.872Z,1513278878.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:39.249Z,1513278879.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:39.645Z,1513278879.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:40.075Z,1513278880.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:40.447Z,1513278880.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:40.846Z,1513278880.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:41.272Z,1513278881.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:41.652Z,1513278881.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:42.048Z,1513278882.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:42.444Z,1513278882.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:42.844Z,1513278882.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:43.292Z,1513278883.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:43.653Z,1513278883.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:44.072Z,1513278884.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:44.463Z,1513278884.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:44.871Z,1513278884.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:45.271Z,1513278885.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:45.642Z,1513278885.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:46.047Z,1513278886.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:46.499Z,1513278886.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:46.847Z,1513278886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:47.256Z,1513278887.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:47.656Z,1513278887.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:48.055Z,1513278888.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:48.446Z,1513278888.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:48.842Z,1513278888.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:49.251Z,1513278889.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:49.684Z,1513278889.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:50.047Z,1513278890.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:50.452Z,1513278890.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:50.852Z,1513278890.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:51.252Z,1513278891.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:51.647Z,1513278891.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:52.047Z,1513278892.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:52.451Z,1513278892.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:52.945Z,1513278892.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:56.608Z,1513278896.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:56.747Z,1513278896.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:57.115Z,1513278897.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:57.547Z,1513278897.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:57.898Z,1513278897.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:58.347Z,1513278898.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:58.654Z,1513278898.654 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-14T19:14:58.654Z,1513278898.654 [DropWeight] Hardware Fault, FailCount= 1
2017-12-14T19:14:58.654Z,1513278898.654 [DropWeight](ERROR): Hardware Fault
2017-12-14T19:14:58.713Z,1513278898.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:58.747Z,1513278898.747 [CBIT](INFO): Critical error at 20171214T191458
2017-12-14T19:14:58.753Z,1513278898.753 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-14T19:14:58.754Z,1513278898.754 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-14T19:14:59.114Z,1513278899.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:59.125Z,1513278899.125 [CBIT](INFO): Critical error at 20171214T191458
2017-12-14T19:14:59.518Z,1513278899.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:14:59.915Z,1513278899.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:00.309Z,1513278900.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:00.694Z,1513278900.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:01.125Z,1513278901.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:01.504Z,1513278901.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:01.976Z,1513278901.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:02.327Z,1513278902.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:02.704Z,1513278902.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:03.103Z,1513278903.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:03.507Z,1513278903.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:03.968Z,1513278903.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:04.323Z,1513278904.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:04.786Z,1513278904.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:05.136Z,1513278905.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:05.528Z,1513278905.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:05.939Z,1513278905.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:06.308Z,1513278906.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:06.727Z,1513278906.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:07.106Z,1513278907.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:07.518Z,1513278907.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:07.963Z,1513278907.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:08.303Z,1513278908.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:08.695Z,1513278908.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:09.100Z,1513278909.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:09.496Z,1513278909.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:09.979Z,1513278909.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:10.339Z,1513278910.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:10.700Z,1513278910.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:11.097Z,1513278911.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:11.504Z,1513278911.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:11.891Z,1513278911.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:12.308Z,1513278912.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:12.698Z,1513278912.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:13.111Z,1513278913.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:13.515Z,1513278913.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:13.515Z,1513278913.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 373
2017-12-14T19:15:13.515Z,1513278913.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:15:13.517Z,1513278913.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:13.517Z,1513278913.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 373
2017-12-14T19:15:13.517Z,1513278913.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:15:13.519Z,1513278913.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:13.519Z,1513278913.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 373
2017-12-14T19:15:13.520Z,1513278913.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:15:13.555Z,1513278913.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:15:13.556Z,1513278913.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:15:13.565Z,1513278913.565 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:15:13.915Z,1513278913.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:15:13.915Z,1513278913.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 373
2017-12-14T19:15:13.916Z,1513278913.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:15:13.916Z,1513278913.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 373
2017-12-14T19:15:13.916Z,1513278913.916 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:15:13.917Z,1513278913.917 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 373
2017-12-14T19:15:14.310Z,1513278914.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:15:14.310Z,1513278914.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:15:14.310Z,1513278914.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:15:14.311Z,1513278914.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:15:14.311Z,1513278914.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:15:14.311Z,1513278914.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:15:14.312Z,1513278914.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:15:14.312Z,1513278914.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:15:14.314Z,1513278914.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:15:14.705Z,1513278914.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:15.182Z,1513278915.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:15.507Z,1513278915.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:15.962Z,1513278915.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:16.347Z,1513278916.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:16.712Z,1513278916.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:17.118Z,1513278917.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:17.499Z,1513278917.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:18.007Z,1513278918.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:18.374Z,1513278918.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:18.739Z,1513278918.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:19.120Z,1513278919.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:19.542Z,1513278919.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:19.971Z,1513278919.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:20.339Z,1513278920.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:20.693Z,1513278920.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:21.122Z,1513278921.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:21.544Z,1513278921.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:21.971Z,1513278921.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:22.309Z,1513278922.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:22.699Z,1513278922.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:23.092Z,1513278923.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:23.510Z,1513278923.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:23.966Z,1513278923.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:24.343Z,1513278924.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:24.770Z,1513278924.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:25.108Z,1513278925.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:25.496Z,1513278925.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:25.902Z,1513278925.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:26.318Z,1513278926.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:26.703Z,1513278926.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:27.116Z,1513278927.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:27.517Z,1513278927.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:27.932Z,1513278927.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:28.319Z,1513278928.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:28.727Z,1513278928.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:29.109Z,1513278929.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:29.515Z,1513278929.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:29.977Z,1513278929.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:30.307Z,1513278930.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:30.696Z,1513278930.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:31.106Z,1513278931.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:31.506Z,1513278931.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:31.928Z,1513278931.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:32.333Z,1513278932.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:32.712Z,1513278932.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:33.113Z,1513278933.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:33.503Z,1513278933.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:33.970Z,1513278933.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:34.375Z,1513278934.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:34.697Z,1513278934.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:35.123Z,1513278935.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:35.527Z,1513278935.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:35.979Z,1513278935.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:36.307Z,1513278936.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:36.704Z,1513278936.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:37.095Z,1513278937.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:37.536Z,1513278937.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:37.982Z,1513278937.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:38.349Z,1513278938.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:38.716Z,1513278938.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:39.164Z,1513278939.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:39.510Z,1513278939.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:39.893Z,1513278939.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:40.299Z,1513278940.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:40.779Z,1513278940.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:41.098Z,1513278941.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:41.503Z,1513278941.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:41.951Z,1513278941.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:42.313Z,1513278942.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:42.720Z,1513278942.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:43.111Z,1513278943.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:43.510Z,1513278943.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:44.026Z,1513278944.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:44.319Z,1513278944.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:44.692Z,1513278944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:45.091Z,1513278945.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:45.499Z,1513278945.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:45.977Z,1513278945.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:46.316Z,1513278946.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:46.710Z,1513278946.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:47.113Z,1513278947.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:47.508Z,1513278947.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:47.948Z,1513278947.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:48.320Z,1513278948.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:48.692Z,1513278948.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:49.117Z,1513278949.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:49.519Z,1513278949.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:49.944Z,1513278949.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:50.340Z,1513278950.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:50.698Z,1513278950.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:51.127Z,1513278951.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:51.503Z,1513278951.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:51.507Z,1513278951.507 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-14T19:10:51.3Z
2017-12-14T19:15:51.507Z,1513278951.507 [Default:CheckIn:Read_GPS] Stopped
2017-12-14T19:15:51.507Z,1513278951.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-14T19:15:51.984Z,1513278951.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:52.701Z,1513278952.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:52.844Z,1513278952.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:56.376Z,1513278956.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:56.441Z,1513278956.441 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20171214T002839/Courier0432.lzma
2017-12-14T19:15:56.508Z,1513278956.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:56.872Z,1513278956.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:57.204Z,1513278957.204 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Courier0432.lzma.bak
2017-12-14T19:15:57.204Z,1513278957.204 [DataOverHttps](INFO): SBD MOMSN=5439433
2017-12-14T19:15:57.266Z,1513278957.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:58.504Z,1513278958.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:15:58.647Z,1513278958.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:02.155Z,1513278962.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:02.306Z,1513278962.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:02.660Z,1513278962.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:03.165Z,1513278963.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:03.464Z,1513278963.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:03.943Z,1513278963.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:07.274Z,1513278967.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:07.356Z,1513278967.356 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20171214T002839/Express0433.lzma
2017-12-14T19:16:07.464Z,1513278967.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:07.768Z,1513278967.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:08.104Z,1513278968.104 [DataOverHttps](INFO): Moved sent file to Logs/20171214T002839/Express0433.lzma.bak
2017-12-14T19:16:08.104Z,1513278968.104 [DataOverHttps](INFO): SBD MOMSN=5439437
2017-12-14T19:16:08.225Z,1513278968.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:09.293Z,1513278969.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:09.296Z,1513278969.296 [Default:CheckIn:Read_Iridium] Stopped
2017-12-14T19:16:09.296Z,1513278969.296 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-14T19:16:09.296Z,1513278969.296 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-14T19:16:09.435Z,1513278969.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:12.947Z,1513278972.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:13.105Z,1513278973.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:13.448Z,1513278973.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:13.820Z,1513278973.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:14.239Z,1513278974.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:14.632Z,1513278974.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:15.014Z,1513278975.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:15.444Z,1513278975.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:15.948Z,1513278975.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:16.235Z,1513278976.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:16.621Z,1513278976.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:17.030Z,1513278977.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:17.445Z,1513278977.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:17.948Z,1513278977.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:18.246Z,1513278978.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:18.647Z,1513278978.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:19.035Z,1513278979.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:19.465Z,1513278979.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:19.823Z,1513278979.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:20.232Z,1513278980.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:20.629Z,1513278980.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:21.055Z,1513278981.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:21.494Z,1513278981.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:21.842Z,1513278981.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:22.307Z,1513278982.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:22.618Z,1513278982.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:23.020Z,1513278983.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:23.422Z,1513278983.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:23.823Z,1513278983.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:24.329Z,1513278984.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:24.639Z,1513278984.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:25.032Z,1513278985.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:25.430Z,1513278985.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:25.819Z,1513278985.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:26.210Z,1513278986.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:26.616Z,1513278986.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:27.043Z,1513278987.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:27.445Z,1513278987.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:28.007Z,1513278988.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:28.247Z,1513278988.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:28.623Z,1513278988.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:29.043Z,1513278989.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:29.423Z,1513278989.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:29.915Z,1513278989.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:30.231Z,1513278990.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:30.624Z,1513278990.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:31.027Z,1513278991.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:31.422Z,1513278991.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:31.823Z,1513278991.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:32.227Z,1513278992.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:32.648Z,1513278992.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:33.027Z,1513278993.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:33.427Z,1513278993.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:33.832Z,1513278993.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:34.229Z,1513278994.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:34.631Z,1513278994.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:35.026Z,1513278995.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:35.448Z,1513278995.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:35.815Z,1513278995.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:36.276Z,1513278996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:36.660Z,1513278996.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:37.057Z,1513278997.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:37.457Z,1513278997.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:37.847Z,1513278997.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:38.349Z,1513278998.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:38.687Z,1513278998.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:39.041Z,1513278999.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:39.444Z,1513278999.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:39.902Z,1513278999.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:40.227Z,1513279000.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:40.648Z,1513279000.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:41.017Z,1513279001.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:41.444Z,1513279001.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:41.927Z,1513279001.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:42.277Z,1513279002.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:42.655Z,1513279002.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:43.044Z,1513279003.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:43.419Z,1513279003.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:43.917Z,1513279003.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:44.229Z,1513279004.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:44.650Z,1513279004.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:45.050Z,1513279005.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:45.447Z,1513279005.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:45.969Z,1513279005.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:46.235Z,1513279006.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:46.617Z,1513279006.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:47.050Z,1513279007.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:47.455Z,1513279007.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:47.868Z,1513279007.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:48.263Z,1513279008.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:48.637Z,1513279008.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:49.071Z,1513279009.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:49.447Z,1513279009.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:49.857Z,1513279009.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:50.367Z,1513279010.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:50.651Z,1513279010.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:51.072Z,1513279011.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:51.475Z,1513279011.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:51.872Z,1513279011.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:52.371Z,1513279012.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:52.651Z,1513279012.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:53.058Z,1513279013.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:53.459Z,1513279013.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:53.951Z,1513279013.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:54.244Z,1513279014.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:54.653Z,1513279014.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:55.051Z,1513279015.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:55.471Z,1513279015.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:55.906Z,1513279015.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:56.227Z,1513279016.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:56.661Z,1513279016.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:57.038Z,1513279017.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:57.427Z,1513279017.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:57.925Z,1513279017.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:58.253Z,1513279018.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:58.647Z,1513279018.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:59.062Z,1513279019.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:59.427Z,1513279019.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:16:59.920Z,1513279019.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:00.231Z,1513279020.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:00.655Z,1513279020.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:01.038Z,1513279021.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:01.478Z,1513279021.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:01.846Z,1513279021.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:02.269Z,1513279022.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:02.625Z,1513279022.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:03.071Z,1513279023.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:03.441Z,1513279023.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:03.854Z,1513279023.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:04.289Z,1513279024.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:04.650Z,1513279024.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:05.062Z,1513279025.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:05.436Z,1513279025.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:05.846Z,1513279025.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:06.295Z,1513279026.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:06.648Z,1513279026.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:07.060Z,1513279027.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:07.452Z,1513279027.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:07.906Z,1513279027.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:08.291Z,1513279028.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:08.637Z,1513279028.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:09.035Z,1513279029.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:09.478Z,1513279029.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:09.897Z,1513279029.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:13.322Z,1513279033.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:13.460Z,1513279033.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:13.881Z,1513279033.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:14.239Z,1513279034.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:14.629Z,1513279034.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:15.024Z,1513279035.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:15.422Z,1513279035.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:15.819Z,1513279035.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:16.225Z,1513279036.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:16.603Z,1513279036.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:17.001Z,1513279037.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:17.411Z,1513279037.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:17.815Z,1513279037.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:18.280Z,1513279038.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:18.623Z,1513279038.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:19.016Z,1513279039.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:19.410Z,1513279039.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:19.815Z,1513279039.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:20.265Z,1513279040.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:20.606Z,1513279040.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:21.008Z,1513279041.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:21.433Z,1513279041.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:21.911Z,1513279041.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:22.217Z,1513279042.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:22.642Z,1513279042.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:23.004Z,1513279043.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:23.447Z,1513279043.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:23.811Z,1513279043.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:24.223Z,1513279044.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:24.614Z,1513279044.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:25.018Z,1513279045.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:25.404Z,1513279045.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:25.806Z,1513279045.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:26.209Z,1513279046.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:26.608Z,1513279046.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:27.036Z,1513279047.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:27.410Z,1513279047.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:27.848Z,1513279047.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:28.211Z,1513279048.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:28.606Z,1513279048.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:29.010Z,1513279049.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:29.404Z,1513279049.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:29.802Z,1513279049.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:30.263Z,1513279050.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:30.627Z,1513279050.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:31.027Z,1513279051.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:31.459Z,1513279051.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:31.817Z,1513279051.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:32.283Z,1513279052.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:32.603Z,1513279052.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:32.999Z,1513279052.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:33.447Z,1513279053.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:33.834Z,1513279053.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:34.263Z,1513279054.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:34.603Z,1513279054.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:35.011Z,1513279055.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:35.465Z,1513279055.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:35.811Z,1513279055.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:36.243Z,1513279056.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:36.672Z,1513279056.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:37.051Z,1513279057.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:37.403Z,1513279057.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:37.809Z,1513279057.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:38.214Z,1513279058.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:38.608Z,1513279058.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:39.013Z,1513279059.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:39.432Z,1513279059.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:39.929Z,1513279059.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:40.214Z,1513279060.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:40.616Z,1513279060.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:41.025Z,1513279061.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:41.397Z,1513279061.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:41.795Z,1513279061.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:42.228Z,1513279062.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:42.631Z,1513279062.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:43.051Z,1513279063.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:43.402Z,1513279063.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:43.797Z,1513279063.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:44.227Z,1513279064.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:44.602Z,1513279064.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:45.003Z,1513279065.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:45.447Z,1513279065.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:45.811Z,1513279065.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:46.299Z,1513279066.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:46.602Z,1513279066.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:47.003Z,1513279067.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:47.404Z,1513279067.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:47.799Z,1513279067.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:48.307Z,1513279068.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:48.624Z,1513279068.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:49.020Z,1513279069.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:49.423Z,1513279069.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:49.802Z,1513279069.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:50.219Z,1513279070.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:50.608Z,1513279070.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:51.011Z,1513279071.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:51.419Z,1513279071.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:51.903Z,1513279071.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:52.213Z,1513279072.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:52.675Z,1513279072.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:53.031Z,1513279073.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:53.404Z,1513279073.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:53.811Z,1513279073.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:54.223Z,1513279074.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:54.623Z,1513279074.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:55.019Z,1513279075.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:55.413Z,1513279075.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:55.923Z,1513279075.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:56.211Z,1513279076.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:56.595Z,1513279076.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:57.040Z,1513279077.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:57.451Z,1513279077.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:57.828Z,1513279077.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:58.240Z,1513279078.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:58.611Z,1513279078.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:59.047Z,1513279079.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:59.419Z,1513279079.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:17:59.808Z,1513279079.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:00.296Z,1513279080.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:00.620Z,1513279080.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:01.018Z,1513279081.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:01.411Z,1513279081.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:01.812Z,1513279081.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:02.310Z,1513279082.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:02.604Z,1513279082.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:03.032Z,1513279083.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:03.419Z,1513279083.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:03.815Z,1513279083.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:04.202Z,1513279084.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:04.611Z,1513279084.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:05.020Z,1513279085.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:05.429Z,1513279085.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:05.898Z,1513279085.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:06.208Z,1513279086.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:06.602Z,1513279086.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:07.012Z,1513279087.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:07.439Z,1513279087.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:07.801Z,1513279087.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:08.220Z,1513279088.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:08.668Z,1513279088.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:09.019Z,1513279089.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:09.411Z,1513279089.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:09.807Z,1513279089.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:10.215Z,1513279090.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:13.615Z,1513279093.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:13.763Z,1513279093.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:14.091Z,1513279094.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:14.524Z,1513279094.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:14.524Z,1513279094.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 374
2017-12-14T19:18:14.524Z,1513279094.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:18:14.526Z,1513279094.526 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:14.526Z,1513279094.526 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 374
2017-12-14T19:18:14.526Z,1513279094.526 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:18:14.528Z,1513279094.528 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:14.528Z,1513279094.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 374
2017-12-14T19:18:14.528Z,1513279094.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:18:14.540Z,1513279094.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:18:14.540Z,1513279094.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:18:14.541Z,1513279094.541 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:18:14.923Z,1513279094.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:18:14.923Z,1513279094.923 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 374
2017-12-14T19:18:14.923Z,1513279094.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:18:14.923Z,1513279094.923 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 374
2017-12-14T19:18:14.924Z,1513279094.924 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:18:14.924Z,1513279094.924 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 374
2017-12-14T19:18:15.313Z,1513279095.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:18:15.314Z,1513279095.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:18:15.314Z,1513279095.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:18:15.314Z,1513279095.314 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:18:15.315Z,1513279095.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:18:15.315Z,1513279095.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:18:15.316Z,1513279095.316 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:18:15.316Z,1513279095.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:18:15.316Z,1513279095.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:18:15.691Z,1513279095.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:16.092Z,1513279096.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:16.527Z,1513279096.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:16.892Z,1513279096.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:17.288Z,1513279097.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:17.695Z,1513279097.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:18.099Z,1513279098.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:18.523Z,1513279098.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:18.944Z,1513279098.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:19.346Z,1513279099.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:19.690Z,1513279099.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:20.134Z,1513279100.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:20.511Z,1513279100.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:20.942Z,1513279100.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:21.350Z,1513279101.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:21.688Z,1513279101.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:22.096Z,1513279102.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:22.503Z,1513279102.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:22.902Z,1513279102.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:23.290Z,1513279103.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:23.695Z,1513279103.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:24.103Z,1513279104.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:24.551Z,1513279104.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:24.903Z,1513279104.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:25.297Z,1513279105.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:25.693Z,1513279105.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:26.099Z,1513279106.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:26.504Z,1513279106.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:26.903Z,1513279106.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:27.295Z,1513279107.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:27.754Z,1513279107.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:28.106Z,1513279108.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:28.523Z,1513279108.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:28.908Z,1513279108.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:29.315Z,1513279109.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:29.418Z,1513279109.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:29.697Z,1513279109.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:30.102Z,1513279110.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:30.215Z,1513279110.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:30.511Z,1513279110.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:30.621Z,1513279110.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:30.956Z,1513279110.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:31.302Z,1513279111.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:31.418Z,1513279111.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:31.698Z,1513279111.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:32.107Z,1513279112.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:32.213Z,1513279112.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:32.503Z,1513279112.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:32.617Z,1513279112.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:32.911Z,1513279112.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:33.300Z,1513279113.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:33.698Z,1513279113.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:34.135Z,1513279114.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:34.512Z,1513279114.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:34.900Z,1513279114.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:35.279Z,1513279115.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:35.680Z,1513279115.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:36.101Z,1513279116.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:36.508Z,1513279116.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:36.906Z,1513279116.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:37.329Z,1513279117.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:37.688Z,1513279117.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:38.110Z,1513279118.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:38.520Z,1513279118.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:38.908Z,1513279118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:39.291Z,1513279119.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:39.687Z,1513279119.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:40.096Z,1513279120.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:40.519Z,1513279120.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:40.904Z,1513279120.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:41.334Z,1513279121.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:41.684Z,1513279121.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:42.148Z,1513279122.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:42.509Z,1513279122.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:42.935Z,1513279122.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:43.292Z,1513279123.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:43.430Z,1513279123.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:43.739Z,1513279123.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:44.096Z,1513279124.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:44.226Z,1513279124.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:44.507Z,1513279124.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:44.633Z,1513279124.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:44.907Z,1513279124.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:45.292Z,1513279125.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:45.429Z,1513279125.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:45.693Z,1513279125.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:46.104Z,1513279126.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:46.226Z,1513279126.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:46.515Z,1513279126.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:46.629Z,1513279126.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:46.967Z,1513279126.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:47.295Z,1513279127.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:47.693Z,1513279127.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:48.097Z,1513279128.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:48.487Z,1513279128.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:48.891Z,1513279128.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:49.297Z,1513279129.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:49.711Z,1513279129.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:50.143Z,1513279130.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:50.487Z,1513279130.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:50.890Z,1513279130.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:51.288Z,1513279131.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:51.692Z,1513279131.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:52.138Z,1513279132.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:52.501Z,1513279132.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:52.900Z,1513279132.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:53.351Z,1513279133.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:53.696Z,1513279133.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:54.107Z,1513279134.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:54.511Z,1513279134.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:54.902Z,1513279134.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:55.302Z,1513279135.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:55.695Z,1513279135.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:56.107Z,1513279136.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:56.541Z,1513279136.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:56.911Z,1513279136.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:57.279Z,1513279137.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:57.413Z,1513279137.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:57.682Z,1513279137.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:58.105Z,1513279138.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:58.211Z,1513279138.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:58.511Z,1513279138.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:58.625Z,1513279138.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:58.907Z,1513279138.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:59.283Z,1513279139.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:18:59.422Z,1513279139.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:18:59.760Z,1513279139.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:00.104Z,1513279140.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:00.217Z,1513279140.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:19:00.509Z,1513279140.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:00.621Z,1513279140.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:19:00.900Z,1513279140.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:01.293Z,1513279141.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:01.691Z,1513279141.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:02.104Z,1513279142.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:02.501Z,1513279142.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:02.898Z,1513279142.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:03.304Z,1513279143.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:03.699Z,1513279143.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:04.162Z,1513279144.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:04.551Z,1513279144.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:04.911Z,1513279144.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:05.278Z,1513279145.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:05.723Z,1513279145.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:06.162Z,1513279146.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:06.549Z,1513279146.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:06.907Z,1513279146.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:07.309Z,1513279147.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:07.676Z,1513279147.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:08.108Z,1513279148.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:08.504Z,1513279148.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:08.903Z,1513279148.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:09.317Z,1513279149.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:09.687Z,1513279149.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:10.112Z,1513279150.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:10.515Z,1513279150.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:13.979Z,1513279153.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:14.111Z,1513279154.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:14.469Z,1513279154.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:14.872Z,1513279154.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:15.245Z,1513279155.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:15.727Z,1513279155.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:16.073Z,1513279156.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:16.472Z,1513279156.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:16.875Z,1513279156.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:17.269Z,1513279157.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:17.675Z,1513279157.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:18.071Z,1513279158.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:18.446Z,1513279158.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:18.899Z,1513279158.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:19.283Z,1513279159.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:19.674Z,1513279159.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:20.079Z,1513279160.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:20.471Z,1513279160.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:20.845Z,1513279160.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:21.255Z,1513279161.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:21.649Z,1513279161.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:22.090Z,1513279162.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:22.478Z,1513279162.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:22.860Z,1513279162.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:23.282Z,1513279163.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:23.659Z,1513279163.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:24.055Z,1513279164.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:24.459Z,1513279164.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:24.855Z,1513279164.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:25.311Z,1513279165.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:25.656Z,1513279165.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:26.057Z,1513279166.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:26.522Z,1513279166.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:26.854Z,1513279166.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:27.294Z,1513279167.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:27.658Z,1513279167.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:28.086Z,1513279168.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:28.496Z,1513279168.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:28.864Z,1513279168.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:29.272Z,1513279169.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:29.652Z,1513279169.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:30.058Z,1513279170.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:30.455Z,1513279170.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:30.859Z,1513279170.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:31.260Z,1513279171.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:31.273Z,1513279171.273 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-14T19:19:31.756Z,1513279171.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:32.071Z,1513279172.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:32.460Z,1513279172.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:32.854Z,1513279172.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:33.253Z,1513279173.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:33.651Z,1513279173.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:34.059Z,1513279174.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:34.464Z,1513279174.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:34.910Z,1513279174.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:35.271Z,1513279175.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:35.656Z,1513279175.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:36.059Z,1513279176.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:36.472Z,1513279176.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:36.857Z,1513279176.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:37.265Z,1513279177.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:37.671Z,1513279177.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:38.070Z,1513279178.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:38.462Z,1513279178.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:38.865Z,1513279178.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:39.239Z,1513279179.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:39.667Z,1513279179.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:40.046Z,1513279180.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:40.470Z,1513279180.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:40.873Z,1513279180.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:41.273Z,1513279181.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:41.656Z,1513279181.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:42.052Z,1513279182.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:42.457Z,1513279182.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:42.854Z,1513279182.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:43.258Z,1513279183.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:43.663Z,1513279183.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:44.055Z,1513279184.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:44.509Z,1513279184.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:44.854Z,1513279184.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:45.258Z,1513279185.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:45.657Z,1513279185.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:46.053Z,1513279186.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:46.464Z,1513279186.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:46.871Z,1513279186.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:47.271Z,1513279187.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:47.702Z,1513279187.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:48.051Z,1513279188.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:48.496Z,1513279188.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:48.855Z,1513279188.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:49.274Z,1513279189.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:49.707Z,1513279189.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:50.071Z,1513279190.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:50.475Z,1513279190.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:50.930Z,1513279190.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:51.261Z,1513279191.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:51.660Z,1513279191.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:52.069Z,1513279192.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:52.470Z,1513279192.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:52.871Z,1513279192.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:53.265Z,1513279193.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:53.664Z,1513279193.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:54.107Z,1513279194.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:54.464Z,1513279194.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:54.848Z,1513279194.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:55.259Z,1513279195.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:55.659Z,1513279195.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:56.056Z,1513279196.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:56.456Z,1513279196.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:56.855Z,1513279196.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:57.254Z,1513279197.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:57.660Z,1513279197.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:58.055Z,1513279198.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:58.467Z,1513279198.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:58.895Z,1513279198.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:59.271Z,1513279199.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:19:59.648Z,1513279199.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:00.055Z,1513279200.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:00.536Z,1513279200.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:00.850Z,1513279200.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:01.260Z,1513279201.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:01.659Z,1513279201.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:02.061Z,1513279202.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:02.457Z,1513279202.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:02.859Z,1513279202.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:03.259Z,1513279203.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:03.699Z,1513279203.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:04.064Z,1513279204.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:04.461Z,1513279204.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:04.871Z,1513279204.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:05.267Z,1513279205.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:05.659Z,1513279205.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:06.059Z,1513279206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:06.467Z,1513279206.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:06.896Z,1513279206.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:07.260Z,1513279207.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:07.672Z,1513279207.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:08.068Z,1513279208.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:08.447Z,1513279208.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:08.875Z,1513279208.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:09.252Z,1513279209.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:09.643Z,1513279209.643 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T19:20:09.643Z,1513279209.643 [BPC1] Data Fault, FailCount= 1
2017-12-14T19:20:09.644Z,1513279209.644 [BPC1](ERROR): Data Fault
2017-12-14T19:20:09.652Z,1513279209.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:09.693Z,1513279209.693 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T19:20:10.103Z,1513279210.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:10.460Z,1513279210.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:10.864Z,1513279210.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:10.917Z,1513279210.917 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T19:20:10.917Z,1513279210.917 [BPC1] No Fault, FailCount= 1
2017-12-14T19:20:14.451Z,1513279214.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:14.584Z,1513279214.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:14.916Z,1513279214.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:15.318Z,1513279215.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:15.720Z,1513279215.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:16.124Z,1513279216.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:16.562Z,1513279216.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:16.946Z,1513279216.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:17.320Z,1513279217.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:17.722Z,1513279217.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:18.128Z,1513279218.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:18.536Z,1513279218.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:18.927Z,1513279218.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:19.332Z,1513279219.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:19.732Z,1513279219.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:20.133Z,1513279220.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:20.535Z,1513279220.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:20.930Z,1513279220.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:21.325Z,1513279221.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:21.728Z,1513279221.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:22.138Z,1513279222.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:22.577Z,1513279222.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:22.937Z,1513279222.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:23.333Z,1513279223.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:23.741Z,1513279223.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:24.145Z,1513279224.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:24.542Z,1513279224.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:24.938Z,1513279224.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:25.335Z,1513279225.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:25.739Z,1513279225.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:26.143Z,1513279226.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:26.545Z,1513279226.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:26.947Z,1513279226.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:27.320Z,1513279227.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:27.723Z,1513279227.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:28.125Z,1513279228.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:28.519Z,1513279228.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:28.924Z,1513279228.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:29.326Z,1513279229.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:29.728Z,1513279229.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:30.125Z,1513279230.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:30.524Z,1513279230.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:30.924Z,1513279230.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:31.325Z,1513279231.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:31.723Z,1513279231.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:32.183Z,1513279232.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:32.528Z,1513279232.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:32.959Z,1513279232.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:33.375Z,1513279233.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:33.723Z,1513279233.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:34.127Z,1513279234.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:34.548Z,1513279234.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:34.928Z,1513279234.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:35.379Z,1513279235.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:35.771Z,1513279235.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:36.137Z,1513279236.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:36.547Z,1513279236.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:36.936Z,1513279236.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:37.332Z,1513279237.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:37.731Z,1513279237.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:38.143Z,1513279238.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:38.584Z,1513279238.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:38.936Z,1513279238.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:39.313Z,1513279239.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:39.719Z,1513279239.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:40.141Z,1513279240.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:40.551Z,1513279240.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:40.943Z,1513279240.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:41.319Z,1513279241.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:41.767Z,1513279241.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:42.122Z,1513279242.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:42.523Z,1513279242.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:42.927Z,1513279242.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:43.339Z,1513279243.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:43.731Z,1513279243.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:44.139Z,1513279244.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:44.531Z,1513279244.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:44.962Z,1513279244.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:45.324Z,1513279245.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:45.724Z,1513279245.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:46.137Z,1513279246.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:46.535Z,1513279246.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:46.939Z,1513279246.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:47.331Z,1513279247.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:47.731Z,1513279247.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:48.159Z,1513279248.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:48.544Z,1513279248.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:48.943Z,1513279248.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:49.328Z,1513279249.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:49.732Z,1513279249.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:50.201Z,1513279250.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:50.515Z,1513279250.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:50.915Z,1513279250.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:51.311Z,1513279251.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:51.719Z,1513279251.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:52.142Z,1513279252.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:52.541Z,1513279252.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:52.953Z,1513279252.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:53.323Z,1513279253.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:53.723Z,1513279253.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:54.151Z,1513279254.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:54.522Z,1513279254.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:54.974Z,1513279254.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:55.332Z,1513279255.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:55.783Z,1513279255.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:56.148Z,1513279256.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:56.530Z,1513279256.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:56.956Z,1513279256.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:57.328Z,1513279257.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:57.731Z,1513279257.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:58.179Z,1513279258.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:58.543Z,1513279258.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:58.978Z,1513279258.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:59.359Z,1513279259.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:20:59.734Z,1513279259.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:00.134Z,1513279260.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:00.537Z,1513279260.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:00.937Z,1513279260.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:01.113Z,1513279261.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:21:01.363Z,1513279261.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:01.747Z,1513279261.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:01.909Z,1513279261.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-14T19:21:02.152Z,1513279262.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:02.531Z,1513279262.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:02.931Z,1513279262.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:03.325Z,1513279263.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:03.728Z,1513279263.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:04.127Z,1513279264.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:04.567Z,1513279264.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:04.936Z,1513279264.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:05.328Z,1513279265.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:05.726Z,1513279265.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:06.126Z,1513279266.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:06.535Z,1513279266.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:06.942Z,1513279266.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:07.375Z,1513279267.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:07.751Z,1513279267.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:08.146Z,1513279268.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:08.520Z,1513279268.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:08.918Z,1513279268.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:09.320Z,1513279269.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:09.723Z,1513279269.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:09.727Z,1513279269.727 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-14T19:21:09.727Z,1513279269.727 [Default:CheckIn:C.Wait] Stopped
2017-12-14T19:21:09.727Z,1513279269.727 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-14T19:21:09.727Z,1513279269.727 [Default:CheckIn:D] Running Loop=1
2017-12-14T19:21:10.149Z,1513279270.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:10.152Z,1513279270.152 [Default:CheckIn:D] Stopped
2017-12-14T19:21:10.152Z,1513279270.152 [Default:CheckIn:E] Running Loop=1
2017-12-14T19:21:10.545Z,1513279270.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:10.553Z,1513279270.553 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1127.912760 min 
2017-12-14T19:21:10.553Z,1513279270.553 [Default:CheckIn:E] Stopped
2017-12-14T19:21:10.553Z,1513279270.553 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-14T19:21:10.553Z,1513279270.553 [Default:CheckIn] Stopped
2017-12-14T19:21:10.554Z,1513279270.554 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-14T19:21:10.554Z,1513279270.554 [Default:CheckIn](INFO): Running loop #109
2017-12-14T19:21:10.554Z,1513279270.554 [Default:CheckIn] Running Loop=109
2017-12-14T19:21:10.554Z,1513279270.554 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-14T19:21:10.554Z,1513279270.554 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-14T19:21:10.956Z,1513279270.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:14.432Z,1513279274.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:14.575Z,1513279274.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:14.940Z,1513279274.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:15.336Z,1513279275.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:15.336Z,1513279275.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 375
2017-12-14T19:21:15.336Z,1513279275.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:21:15.338Z,1513279275.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:15.338Z,1513279275.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 375
2017-12-14T19:21:15.338Z,1513279275.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:21:15.340Z,1513279275.340 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:15.340Z,1513279275.340 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 375
2017-12-14T19:21:15.340Z,1513279275.340 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:21:15.390Z,1513279275.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:21:15.390Z,1513279275.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:21:15.390Z,1513279275.390 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:21:15.769Z,1513279275.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:21:15.769Z,1513279275.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 375
2017-12-14T19:21:15.770Z,1513279275.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:21:15.770Z,1513279275.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 375
2017-12-14T19:21:15.770Z,1513279275.770 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:21:15.770Z,1513279275.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 375
2017-12-14T19:21:16.126Z,1513279276.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:21:16.127Z,1513279276.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:21:16.127Z,1513279276.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:21:16.127Z,1513279276.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:21:16.128Z,1513279276.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:21:16.128Z,1513279276.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:21:16.128Z,1513279276.128 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:21:16.129Z,1513279276.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:21:16.129Z,1513279276.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:21:16.552Z,1513279276.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:16.924Z,1513279276.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:17.398Z,1513279277.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:17.779Z,1513279277.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:18.147Z,1513279278.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:18.536Z,1513279278.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:18.939Z,1513279278.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:19.355Z,1513279279.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:19.764Z,1513279279.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:20.185Z,1513279280.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:20.688Z,1513279280.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:20.963Z,1513279280.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:21.375Z,1513279281.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:21.749Z,1513279281.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:22.159Z,1513279282.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:22.559Z,1513279282.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:22.953Z,1513279282.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:23.367Z,1513279283.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:23.847Z,1513279283.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:24.155Z,1513279284.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:24.563Z,1513279284.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:24.944Z,1513279284.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:25.374Z,1513279285.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:25.744Z,1513279285.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:26.190Z,1513279286.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:26.535Z,1513279286.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:26.967Z,1513279286.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:27.372Z,1513279287.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:27.768Z,1513279287.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:28.166Z,1513279288.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:28.528Z,1513279288.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:28.928Z,1513279288.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:29.373Z,1513279289.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:29.787Z,1513279289.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:30.280Z,1513279290.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:30.619Z,1513279290.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:30.923Z,1513279290.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:31.317Z,1513279291.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:31.719Z,1513279291.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:32.129Z,1513279292.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:32.537Z,1513279292.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:32.939Z,1513279292.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:33.319Z,1513279293.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:33.788Z,1513279293.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:34.120Z,1513279294.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:34.527Z,1513279294.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:34.928Z,1513279294.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:35.332Z,1513279295.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:35.732Z,1513279295.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:36.132Z,1513279296.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:36.520Z,1513279296.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:36.922Z,1513279296.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:37.324Z,1513279297.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:37.719Z,1513279297.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:38.153Z,1513279298.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:38.533Z,1513279298.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:38.939Z,1513279298.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:39.321Z,1513279299.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:39.722Z,1513279299.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:40.121Z,1513279300.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:40.547Z,1513279300.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:40.919Z,1513279300.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:41.339Z,1513279301.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:41.752Z,1513279301.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:42.143Z,1513279302.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:42.519Z,1513279302.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:42.956Z,1513279302.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:43.323Z,1513279303.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:43.748Z,1513279303.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:44.133Z,1513279304.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:44.539Z,1513279304.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:44.934Z,1513279304.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:45.317Z,1513279305.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:45.719Z,1513279305.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:46.121Z,1513279306.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:46.522Z,1513279306.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:46.921Z,1513279306.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:47.339Z,1513279307.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:47.733Z,1513279307.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:48.132Z,1513279308.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:48.522Z,1513279308.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:48.922Z,1513279308.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:49.321Z,1513279309.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:49.720Z,1513279309.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:50.134Z,1513279310.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:50.616Z,1513279310.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:50.932Z,1513279310.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:51.318Z,1513279311.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:51.723Z,1513279311.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:52.144Z,1513279312.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:52.516Z,1513279312.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:52.919Z,1513279312.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:53.332Z,1513279313.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:53.731Z,1513279313.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:54.125Z,1513279314.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:54.547Z,1513279314.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:54.958Z,1513279314.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:55.342Z,1513279315.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:55.736Z,1513279315.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:56.134Z,1513279316.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:56.543Z,1513279316.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:56.939Z,1513279316.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:57.339Z,1513279317.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:57.727Z,1513279317.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:58.131Z,1513279318.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:58.543Z,1513279318.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:58.991Z,1513279318.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:59.339Z,1513279319.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:21:59.786Z,1513279319.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:00.139Z,1513279320.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:00.590Z,1513279320.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:00.935Z,1513279320.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:01.332Z,1513279321.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:01.752Z,1513279321.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:02.187Z,1513279322.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:02.591Z,1513279322.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:02.939Z,1513279322.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:03.331Z,1513279323.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:03.735Z,1513279323.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:04.222Z,1513279324.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:04.519Z,1513279324.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:04.975Z,1513279324.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:05.354Z,1513279325.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:05.778Z,1513279325.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:06.143Z,1513279326.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:06.531Z,1513279326.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:06.974Z,1513279326.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:07.378Z,1513279327.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:07.751Z,1513279327.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:08.170Z,1513279328.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:08.566Z,1513279328.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:08.939Z,1513279328.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:09.354Z,1513279329.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:09.743Z,1513279329.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:10.128Z,1513279330.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:10.566Z,1513279330.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:10.949Z,1513279330.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:16.143Z,1513279336.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:16.310Z,1513279336.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:16.657Z,1513279336.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:17.070Z,1513279337.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:17.432Z,1513279337.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:17.905Z,1513279337.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:18.262Z,1513279338.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:18.663Z,1513279338.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:19.051Z,1513279339.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:19.432Z,1513279339.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:19.910Z,1513279339.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:20.251Z,1513279340.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:20.646Z,1513279340.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:21.026Z,1513279341.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:21.463Z,1513279341.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:21.961Z,1513279341.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:22.269Z,1513279342.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:22.637Z,1513279342.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:23.073Z,1513279343.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:23.431Z,1513279343.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:23.890Z,1513279343.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:24.291Z,1513279344.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:24.655Z,1513279344.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:25.063Z,1513279345.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:25.456Z,1513279345.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:25.849Z,1513279345.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:26.295Z,1513279346.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:26.647Z,1513279346.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:27.043Z,1513279347.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:27.469Z,1513279347.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:27.875Z,1513279347.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:28.368Z,1513279348.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:28.633Z,1513279348.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:29.051Z,1513279349.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:29.434Z,1513279349.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:29.902Z,1513279349.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:30.291Z,1513279350.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:30.638Z,1513279350.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:31.041Z,1513279351.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:31.419Z,1513279351.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:31.891Z,1513279351.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:32.224Z,1513279352.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:32.634Z,1513279352.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:33.021Z,1513279353.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:33.428Z,1513279353.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:33.919Z,1513279353.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:34.275Z,1513279354.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:34.627Z,1513279354.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:35.027Z,1513279355.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:35.425Z,1513279355.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:35.885Z,1513279355.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:36.236Z,1513279356.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:36.637Z,1513279356.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:37.036Z,1513279357.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:37.462Z,1513279357.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:37.819Z,1513279357.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:38.260Z,1513279358.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:38.625Z,1513279358.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:39.022Z,1513279359.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:39.428Z,1513279359.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:39.840Z,1513279359.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:40.288Z,1513279360.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:40.666Z,1513279360.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:41.034Z,1513279361.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:41.432Z,1513279361.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:41.834Z,1513279361.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:42.291Z,1513279362.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:42.641Z,1513279362.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:43.039Z,1513279363.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:43.417Z,1513279363.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:43.930Z,1513279363.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:44.275Z,1513279364.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:44.631Z,1513279364.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:45.023Z,1513279365.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:45.432Z,1513279365.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:45.896Z,1513279365.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:46.243Z,1513279366.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:46.627Z,1513279366.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:47.025Z,1513279367.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:47.425Z,1513279367.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:47.891Z,1513279367.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:48.259Z,1513279368.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:48.643Z,1513279368.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:49.047Z,1513279369.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:49.416Z,1513279369.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:49.888Z,1513279369.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:50.279Z,1513279370.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:50.639Z,1513279370.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:51.074Z,1513279371.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:51.440Z,1513279371.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:51.935Z,1513279371.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:52.255Z,1513279372.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:52.623Z,1513279372.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:53.019Z,1513279373.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:53.461Z,1513279373.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:53.823Z,1513279373.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:54.306Z,1513279374.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:54.647Z,1513279374.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:55.039Z,1513279375.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:55.420Z,1513279375.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:55.825Z,1513279375.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:56.309Z,1513279376.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:56.665Z,1513279376.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:57.063Z,1513279377.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:57.448Z,1513279377.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:57.912Z,1513279377.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:58.247Z,1513279378.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:58.630Z,1513279378.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:59.024Z,1513279379.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:59.440Z,1513279379.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:22:59.985Z,1513279379.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:00.251Z,1513279380.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:00.629Z,1513279380.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:01.020Z,1513279381.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:01.415Z,1513279381.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:01.895Z,1513279381.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:02.243Z,1513279382.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:02.638Z,1513279382.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:03.035Z,1513279383.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:03.427Z,1513279383.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:03.889Z,1513279383.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:04.240Z,1513279384.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:04.622Z,1513279384.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:05.018Z,1513279385.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:05.447Z,1513279385.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:05.848Z,1513279385.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:06.271Z,1513279386.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:06.628Z,1513279386.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:07.038Z,1513279387.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:07.432Z,1513279387.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:07.868Z,1513279387.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:08.304Z,1513279388.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:08.644Z,1513279388.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:09.043Z,1513279389.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:09.460Z,1513279389.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:09.840Z,1513279389.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:10.296Z,1513279390.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:10.641Z,1513279390.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:11.054Z,1513279391.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:14.682Z,1513279394.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:14.804Z,1513279394.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:15.175Z,1513279395.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:15.607Z,1513279395.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:16.001Z,1513279396.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:16.415Z,1513279396.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:16.773Z,1513279396.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:17.196Z,1513279397.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:17.582Z,1513279397.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:17.981Z,1513279397.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:18.380Z,1513279398.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:18.778Z,1513279398.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:19.182Z,1513279399.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:19.596Z,1513279399.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:19.996Z,1513279399.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:20.384Z,1513279400.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:20.791Z,1513279400.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:21.187Z,1513279401.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:21.575Z,1513279401.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:21.975Z,1513279401.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:22.387Z,1513279402.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:22.799Z,1513279402.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:23.191Z,1513279403.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:23.591Z,1513279403.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:23.991Z,1513279403.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:24.382Z,1513279404.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:24.834Z,1513279404.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:25.181Z,1513279405.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:25.589Z,1513279405.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:26.015Z,1513279406.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:26.399Z,1513279406.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:26.795Z,1513279406.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:27.195Z,1513279407.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:27.567Z,1513279407.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:27.997Z,1513279407.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:28.390Z,1513279408.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:28.770Z,1513279408.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:29.195Z,1513279409.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:29.612Z,1513279409.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:29.991Z,1513279409.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:30.375Z,1513279410.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:30.770Z,1513279410.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:31.196Z,1513279411.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:31.559Z,1513279411.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x57851 got:0x16896
2017-12-14T19:23:31.580Z,1513279411.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:31.981Z,1513279411.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:32.407Z,1513279412.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:32.790Z,1513279412.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:33.187Z,1513279413.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:33.579Z,1513279413.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:33.999Z,1513279413.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:34.380Z,1513279414.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:34.764Z,1513279414.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x49950 got:0x16896
2017-12-14T19:23:34.791Z,1513279414.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:35.191Z,1513279415.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:35.628Z,1513279415.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:35.975Z,1513279415.975 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-14T19:23:35.975Z,1513279415.975 [BPC1] Data Fault, FailCount= 1
2017-12-14T19:23:35.975Z,1513279415.975 [BPC1](ERROR): Data Fault
2017-12-14T19:23:35.983Z,1513279415.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:35.998Z,1513279415.998 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-14T19:23:36.377Z,1513279416.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:36.781Z,1513279416.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:37.178Z,1513279417.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:37.191Z,1513279417.191 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-14T19:23:37.191Z,1513279417.191 [BPC1] No Fault, FailCount= 1
2017-12-14T19:23:37.623Z,1513279417.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:37.978Z,1513279417.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:38.378Z,1513279418.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:38.792Z,1513279418.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:39.267Z,1513279419.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:39.588Z,1513279419.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:39.994Z,1513279419.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:40.395Z,1513279420.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:40.772Z,1513279420.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:41.192Z,1513279421.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:41.582Z,1513279421.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:41.979Z,1513279421.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:42.407Z,1513279422.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:42.777Z,1513279422.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:43.175Z,1513279423.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:43.575Z,1513279423.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:43.971Z,1513279423.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:44.385Z,1513279424.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:44.782Z,1513279424.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:45.187Z,1513279425.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:45.603Z,1513279425.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:46.025Z,1513279426.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:46.382Z,1513279426.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:46.771Z,1513279426.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:47.200Z,1513279427.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:47.599Z,1513279427.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:48.001Z,1513279428.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:48.375Z,1513279428.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:48.870Z,1513279428.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:49.174Z,1513279429.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:49.584Z,1513279429.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:49.971Z,1513279429.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:50.393Z,1513279430.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:50.787Z,1513279430.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:51.187Z,1513279431.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:51.575Z,1513279431.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:52.022Z,1513279432.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:52.379Z,1513279432.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:52.778Z,1513279432.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:53.187Z,1513279433.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:53.592Z,1513279433.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:53.983Z,1513279433.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:54.376Z,1513279434.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:54.779Z,1513279434.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:55.190Z,1513279435.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:55.589Z,1513279435.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:55.986Z,1513279435.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:56.391Z,1513279436.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:56.794Z,1513279436.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:57.212Z,1513279437.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:57.583Z,1513279437.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:57.986Z,1513279437.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:58.459Z,1513279438.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:58.775Z,1513279438.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:59.204Z,1513279439.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:59.604Z,1513279439.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:23:59.000Z,1513279440.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:00.403Z,1513279440.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:00.784Z,1513279440.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:01.171Z,1513279441.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:01.614Z,1513279441.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:02.004Z,1513279442.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:02.395Z,1513279442.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:02.788Z,1513279442.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:03.190Z,1513279443.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:03.564Z,1513279443.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:03.984Z,1513279443.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:04.391Z,1513279444.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:04.800Z,1513279444.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:05.201Z,1513279445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:05.603Z,1513279445.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:05.998Z,1513279445.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:06.372Z,1513279446.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:06.772Z,1513279446.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:07.171Z,1513279447.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:07.569Z,1513279447.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:08.010Z,1513279448.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:08.381Z,1513279448.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:08.820Z,1513279448.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:09.187Z,1513279449.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:09.576Z,1513279449.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:09.979Z,1513279449.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:10.383Z,1513279450.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:10.774Z,1513279450.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:11.236Z,1513279451.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:14.687Z,1513279454.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:14.828Z,1513279454.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:15.175Z,1513279455.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:15.564Z,1513279455.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:16.020Z,1513279456.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:16.379Z,1513279456.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:16.379Z,1513279456.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 376
2017-12-14T19:24:16.379Z,1513279456.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-14T19:24:16.385Z,1513279456.385 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:16.385Z,1513279456.385 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 376
2017-12-14T19:24:16.385Z,1513279456.385 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-14T19:24:16.387Z,1513279456.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:16.387Z,1513279456.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 376
2017-12-14T19:24:16.387Z,1513279456.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-14T19:24:16.408Z,1513279456.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-14T19:24:16.408Z,1513279456.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-14T19:24:16.408Z,1513279456.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-14T19:24:16.807Z,1513279456.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-14T19:24:16.807Z,1513279456.807 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 376
2017-12-14T19:24:16.808Z,1513279456.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-14T19:24:16.808Z,1513279456.808 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 376
2017-12-14T19:24:16.808Z,1513279456.808 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-14T19:24:16.808Z,1513279456.808 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 376
2017-12-14T19:24:17.174Z,1513279457.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-14T19:24:17.175Z,1513279457.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:24:17.175Z,1513279457.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:24:17.175Z,1513279457.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-14T19:24:17.176Z,1513279457.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:24:17.176Z,1513279457.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:24:17.176Z,1513279457.176 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-14T19:24:17.177Z,1513279457.177 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-14T19:24:17.177Z,1513279457.177 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-14T19:24:17.614Z,1513279457.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:17.968Z,1513279457.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:18.369Z,1513279458.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:18.770Z,1513279458.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:19.184Z,1513279459.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:19.574Z,1513279459.574 [PNI_TCM](ERROR): CRC does not match. Expected:0x23474 got:0x16896
2017-12-14T19:24:19.636Z,1513279459.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:19.976Z,1513279459.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:20.370Z,1513279460.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:20.839Z,1513279460.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:21.179Z,1513279461.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:21.555Z,1513279461.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:22.006Z,1513279462.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:22.382Z,1513279462.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:22.824Z,1513279462.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:23.183Z,1513279463.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:23.559Z,1513279463.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:24.026Z,1513279464.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:24.378Z,1513279464.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:24.760Z,1513279464.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:25.184Z,1513279465.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:25.580Z,1513279465.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:25.991Z,1513279465.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:26.362Z,1513279466.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:26.766Z,1513279466.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:27.243Z,1513279467.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:27.684Z,1513279467.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:27.961Z,1513279467.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:28.381Z,1513279468.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:28.792Z,1513279468.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:29.190Z,1513279469.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:29.564Z,1513279469.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:30.004Z,1513279470.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:30.396Z,1513279470.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:30.769Z,1513279470.769 [PNI_TCM](ERROR): CRC does not match. Expected:0x841 got:0x36824
2017-12-14T19:24:30.798Z,1513279470.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:31.200Z,1513279471.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:31.574Z,1513279471.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:31.999Z,1513279471.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:32.370Z,1513279472.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:32.770Z,1513279472.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:33.168Z,1513279473.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:33.634Z,1513279473.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:33.985Z,1513279473.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:34.384Z,1513279474.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:34.787Z,1513279474.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:35.187Z,1513279475.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:35.581Z,1513279475.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:35.983Z,1513279475.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:36.378Z,1513279476.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:36.783Z,1513279476.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:37.179Z,1513279477.179 [PNI_TCM](ERROR): CRC does not match. Expected:0x3371 got:0x472
2017-12-14T19:24:37.206Z,1513279477.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:37.588Z,1513279477.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:37.996Z,1513279477.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:38.376Z,1513279478.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:38.771Z,1513279478.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:39.174Z,1513279479.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:39.572Z,1513279479.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:39.000Z,1513279480.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:40.322Z,1513279480.322 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-14T19:24:40.322Z,1513279480.322 [NAL9602] Data Fault, FailCount= 3
2017-12-14T19:24:40.322Z,1513279480.322 [NAL9602](ERROR): Data Fault
2017-12-14T19:24:40.377Z,1513279480.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:40.403Z,1513279480.403 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-14T19:24:40.718Z,1513279480.718 [NAL9602](INFO): Powering down
2017-12-14T19:24:40.782Z,1513279480.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:41.171Z,1513279481.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:41.570Z,1513279481.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:41.583Z,1513279481.583 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-14T19:24:41.583Z,1513279481.583 [NAL9602] No Fault, FailCount= 3
2017-12-14T19:24:41.975Z,1513279481.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:42.414Z,1513279482.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:42.766Z,1513279482.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:43.211Z,1513279483.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:43.607Z,1513279483.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:43.997Z,1513279483.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:44.361Z,1513279484.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:44.815Z,1513279484.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:45.182Z,1513279485.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:45.552Z,1513279485.552 [PNI_TCM](ERROR): CRC does not match. Expected:0x35724 got:0x7490
2017-12-14T19:24:45.595Z,1513279485.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:45.978Z,1513279485.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:46.398Z,1513279486.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:46.768Z,1513279486.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:47.173Z,1513279487.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:47.562Z,1513279487.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:48.003Z,1513279488.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:48.357Z,1513279488.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x12366 got:0x96
2017-12-14T19:24:48.383Z,1513279488.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:48.765Z,1513279488.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:49.171Z,1513279489.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:49.615Z,1513279489.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:49.967Z,1513279489.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:50.345Z,1513279490.345 [PNI_TCM](ERROR): CRC does not match. Expected:0x9387 got:0x16897
2017-12-14T19:24:50.371Z,1513279490.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:50.758Z,1513279490.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:51.174Z,1513279491.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:51.582Z,1513279491.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:51.948Z,1513279491.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x32099 got:0x45849
2017-12-14T19:24:51.988Z,1513279491.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:52.373Z,1513279492.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:52.797Z,1513279492.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:53.177Z,1513279493.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:53.555Z,1513279493.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:53.995Z,1513279493.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:54.371Z,1513279494.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:54.787Z,1513279494.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:55.158Z,1513279495.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:55.559Z,1513279495.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:56.010Z,1513279496.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:56.383Z,1513279496.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:56.755Z,1513279496.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:57.163Z,1513279497.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:57.579Z,1513279497.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:58.009Z,1513279498.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:58.378Z,1513279498.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:58.779Z,1513279498.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:59.208Z,1513279499.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:59.561Z,1513279499.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:24:59.967Z,1513279499.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:00.364Z,1513279500.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:00.770Z,1513279500.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:01.167Z,1513279501.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:01.569Z,1513279501.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:01.962Z,1513279501.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:02.371Z,1513279502.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:02.768Z,1513279502.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:03.192Z,1513279503.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:03.567Z,1513279503.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:03.983Z,1513279503.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:04.379Z,1513279504.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:04.759Z,1513279504.759 [PNI_TCM](ERROR): CRC does not match. Expected:0x49298 got:0x64519
2017-12-14T19:25:04.822Z,1513279504.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:05.171Z,1513279505.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:05.568Z,1513279505.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:05.988Z,1513279505.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:06.383Z,1513279506.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:06.763Z,1513279506.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:07.187Z,1513279507.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:07.567Z,1513279507.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:08.011Z,1513279508.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:08.370Z,1513279508.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:08.806Z,1513279508.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:09.168Z,1513279509.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:09.579Z,1513279509.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:09.970Z,1513279509.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:10.372Z,1513279510.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:10.724Z,1513279510.724 [NAL9602](INFO): Powering up NAL9602
2017-12-14T19:25:10.775Z,1513279510.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:11.167Z,1513279511.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:11.571Z,1513279511.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:15.084Z,1513279515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:15.205Z,1513279515.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:15.560Z,1513279515.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:15.999Z,1513279515.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:16.396Z,1513279516.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:16.786Z,1513279516.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:17.154Z,1513279517.154 [PNI_TCM](ERROR): CRC does not match. Expected:0x41389 got:0x62488
2017-12-14T19:25:17.191Z,1513279517.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:17.558Z,1513279517.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:17.961Z,1513279517.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:18.376Z,1513279518.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:18.760Z,1513279518.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:19.211Z,1513279519.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:19.551Z,1513279519.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:19.975Z,1513279519.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:20.368Z,1513279520.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:20.764Z,1513279520.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:21.166Z,1513279521.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:21.585Z,1513279521.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:21.914Z,1513279521.914 [NAL9602](INFO): NAL9602 initialized
2017-12-14T19:25:21.954Z,1513279521.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x44445 got:0x40960
2017-12-14T19:25:21.990Z,1513279521.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:22.396Z,1513279522.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:22.777Z,1513279522.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:23.181Z,1513279523.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:23.574Z,1513279523.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:23.962Z,1513279523.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:24.368Z,1513279524.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:24.770Z,1513279524.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:25.175Z,1513279525.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:25.611Z,1513279525.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:26.008Z,1513279526.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:26.376Z,1513279526.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:26.767Z,1513279526.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:27.188Z,1513279527.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:27.566Z,1513279527.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:27.975Z,1513279527.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:28.434Z,1513279528.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:28.803Z,1513279528.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:29.188Z,1513279529.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:29.595Z,1513279529.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:29.962Z,1513279529.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:30.406Z,1513279530.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:30.757Z,1513279530.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:31.187Z,1513279531.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:31.558Z,1513279531.558 [PNI_TCM](ERROR): CRC does not match. Expected:0x18658 got:0x27
2017-12-14T19:25:31.583Z,1513279531.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:32.049Z,1513279532.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:32.375Z,1513279532.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:32.766Z,1513279532.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:33.161Z,1513279533.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:33.553Z,1513279533.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:34.016Z,1513279534.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:34.381Z,1513279534.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:34.778Z,1513279534.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:35.209Z,1513279535.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:35.570Z,1513279535.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:35.981Z,1513279535.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:36.364Z,1513279536.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:36.760Z,1513279536.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:37.191Z,1513279537.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:37.586Z,1513279537.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-14T19:25:37.954Z,1513279537.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x3318 got:0x60476
2017-12-14T19:25:37.987Z,1513279537.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitud